# translation of libDrakX.po to Italian # Copyright (C) 2000, 2001 Mandriva S.A. # # Paolo Lorenzin , 2000. # Simone Riccio , 2002. # Roberto Rosselli Del Turco , 2001, 2002,2003. # Marco De Vitis , 2003. # Andrea Celli , 2003, 2004, 2005, 2006, 2007, 2008, 2009. # Giuseppe Levi , 2005. # Federica De Luca , 2008. msgid "" msgstr "" "Project-Id-Version: libDrakX\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-09-10 12:20+0200\n" "PO-Revision-Date: 2009-10-07 16:13+0200\n" "Last-Translator: Andrea Celli \n" "Language-Team: Italian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #: any.pm:252 any.pm:884 diskdrake/interactive.pm:594 #: diskdrake/interactive.pm:794 diskdrake/interactive.pm:838 #: diskdrake/interactive.pm:924 diskdrake/interactive.pm:1178 #: diskdrake/interactive.pm:1230 do_pkgs.pm:241 do_pkgs.pm:287 #: harddrake/sound.pm:303 interactive.pm:587 pkgs.pm:281 #, c-format msgid "Please wait" msgstr "Attendere prego" #: any.pm:252 #, c-format msgid "Bootloader installation in progress" msgstr "Installazione del bootloader in corso" #: any.pm:263 #, c-format msgid "" "LILO wants to assign a new Volume ID to drive %s. However, changing\n" "the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows " "error.\n" "This caution does not apply to Windows 95 or 98, or to NT data disks.\n" "\n" "Assign a new Volume ID?" msgstr "" "LILO vuole assegnare un nuovo Volume ID al drive %s. Tuttavia, il cambio\n" "del Volume ID di una partizione di boot di Windows NT, 2000, o XP " "costituisce\n" "un errore fatale per Windows.\n" "Non servono precauzioni per le partizioni di Windows 95/98 o NT con solo " "dati.\n" "\n" "Assegno un nuovo Volume ID?" #: any.pm:274 #, c-format msgid "Installation of bootloader failed. The following error occurred:" msgstr "Installazione del bootloader fallita. Si è verificato il seguente errore:" #: any.pm:280 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you do not see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "Potrebbe servire la modifica del dispositivo di boot dell'Open Firmware\n" " per abilitare il bootloader. Se non vedi il prompt del bootloader dopo\n" " il riavvio, tieni premuto Command-Option-O-F al riavvio e digita:\n" " setenv boot-device %s,\\\\:tbxi\n" " Poi digita: shut-down\n" "Al boot successivo dovresti vedere il prompt del bootloader." #: any.pm:320 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" "Hai deciso di installare il bootloader su una partizione.\n" "Questo significa che esiste già un bootloader (ad es. System Commander)\n" "installato sul disco fisso dal quale viene effettuato il boot.\n" "\n" "Da quale disco viene effettuato il boot?" #: any.pm:346 #, c-format msgid "First sector (MBR) of drive %s" msgstr "Primo settore del disco (MBR) %s" #: any.pm:348 #, c-format msgid "First sector of drive (MBR)" msgstr "Primo settore del disco (MBR)" #: any.pm:350 #, c-format msgid "First sector of the root partition" msgstr "Primo settore della partizione root" #: any.pm:352 #, c-format msgid "On Floppy" msgstr "Su floppy" #: any.pm:354 pkgs.pm:277 ugtk2.pm:526 #, c-format msgid "Skip" msgstr "Salta" #: any.pm:358 #, c-format msgid "Bootloader Installation" msgstr "Installazione del bootloader in corso" #: any.pm:362 #, c-format msgid "Where do you want to install the bootloader?" msgstr "Dove vuoi installare il bootloader?" #: any.pm:389 #, c-format msgid "Boot Style Configuration" msgstr "Configurazione stile di avvio" #: any.pm:399 any.pm:429 any.pm:430 #, c-format msgid "Bootloader main options" msgstr "Opzioni principali del bootloader" #: any.pm:403 #, c-format msgid "Bootloader" msgstr "Bootloader" #: any.pm:404 any.pm:433 #, c-format msgid "Bootloader to use" msgstr "Bootloader da usare" #: any.pm:406 any.pm:435 #, c-format msgid "Boot device" msgstr "Dispositivo di boot" #: any.pm:408 #, c-format msgid "Main options" msgstr "Opzioni principali" #: any.pm:409 #, c-format msgid "Delay before booting default image" msgstr "Ritardo prima di avviare con l'immagine predefinita" #: any.pm:410 #, c-format msgid "Enable ACPI" msgstr "Abilitare l'ACPI" #: any.pm:411 #, c-format msgid "Enable SMP" msgstr "Abilitare SMP" #: any.pm:412 #, c-format msgid "Enable APIC" msgstr "Abilitare l'APIC" #: any.pm:413 #, c-format msgid "Enable Local APIC" msgstr "Abilitare l'APIC locale" #: any.pm:415 any.pm:829 any.pm:845 authentication.pm:250 #: diskdrake/smbnfs_gtk.pm:181 #, c-format msgid "Password" msgstr "Password" #: any.pm:417 authentication.pm:261 #, c-format msgid "The passwords do not match" msgstr "Le password non corrispondono" #: any.pm:417 authentication.pm:261 diskdrake/interactive.pm:1402 #, c-format msgid "Please try again" msgstr "Per favore, riprova" #: any.pm:418 #, c-format msgid "You can not use a password with %s" msgstr "Non puoi usare una password con %s" #: any.pm:421 any.pm:831 any.pm:847 authentication.pm:251 #, c-format msgid "Password (again)" msgstr "Password (ripeti)" #: any.pm:422 #, c-format msgid "Restrict command line options" msgstr "Opzioni da riga di comando solo con password" #: any.pm:422 #, c-format msgid "restrict" msgstr "limita" #: any.pm:423 #, c-format msgid "Option ``Restrict command line options'' is of no use without a password" msgstr "" "L'opzione \"Opzioni da riga di comando solo con password\" è inutile senza " "una password" #: any.pm:425 #, c-format msgid "Clean /tmp at each boot" msgstr "Svuota /tmp ad ogni avvio" #: any.pm:434 #, c-format msgid "Init Message" msgstr "Messaggio di init" #: any.pm:436 #, c-format msgid "Open Firmware Delay" msgstr "Attesa dell'Open Firmware" #: any.pm:437 #, c-format msgid "Kernel Boot Timeout" msgstr "Attesa per il boot del kernel" #: any.pm:438 #, c-format msgid "Enable CD Boot?" msgstr "Abilitare l'avvio da CD-ROM?" #: any.pm:439 #, c-format msgid "Enable OF Boot?" msgstr "Abilitare boot da OF?" #: any.pm:440 #, c-format msgid "Default OS?" msgstr "Sistema operativo predefinito?" #: any.pm:513 #, c-format msgid "Image" msgstr "Immagine" #: any.pm:514 any.pm:527 #, c-format msgid "Root" msgstr "Root" #: any.pm:515 any.pm:540 #, c-format msgid "Append" msgstr "Opzioni per il kernel" #: any.pm:517 #, c-format msgid "Xen append" msgstr "Accodamento Xen" #: any.pm:520 #, c-format msgid "Video mode" msgstr "Modalità video" #: any.pm:522 #, c-format msgid "Initrd" msgstr "Initrd" #: any.pm:523 #, c-format msgid "Network profile" msgstr "Profilo di rete" #: any.pm:532 any.pm:537 any.pm:539 diskdrake/interactive.pm:404 #, c-format msgid "Label" msgstr "Etichetta" #: any.pm:534 any.pm:542 harddrake/v4l.pm:438 #, c-format msgid "Default" msgstr "Predefinito" #: any.pm:541 #, c-format msgid "NoVideo" msgstr "No Video" #: any.pm:552 #, c-format msgid "Empty label not allowed" msgstr "Non sono ammesse etichette vuote" #: any.pm:553 #, c-format msgid "You must specify a kernel image" msgstr "Bisogna indicare l'immagine di un kernel" #: any.pm:553 #, c-format msgid "You must specify a root partition" msgstr "Bisogna specificare una partizione root" #: any.pm:554 #, c-format msgid "This label is already used" msgstr "Questa etichetta è già in uso" #: any.pm:572 #, c-format msgid "Which type of entry do you want to add?" msgstr "Che tipo di voce vuoi aggiungere?" #: any.pm:573 #, c-format msgid "Linux" msgstr "Linux" #: any.pm:573 #, c-format msgid "Other OS (SunOS...)" msgstr "Altro S.O. (SunOS...)" #: any.pm:574 #, c-format msgid "Other OS (MacOS...)" msgstr "Altro S.O. (MacOS,...)" #: any.pm:574 #, c-format msgid "Other OS (Windows...)" msgstr "Altro S.O. (Windows, ...)" #: any.pm:621 #, c-format msgid "Bootloader Configuration" msgstr "Configurazione del bootloader" #: any.pm:622 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "Finora ci sono queste voci nel menu di boot.\n" "Puoi aggiungerne altre o cambiare quelle esistenti." #: any.pm:790 #, c-format msgid "access to X programs" msgstr "accesso ai programmi X" #: any.pm:791 #, c-format msgid "access to rpm tools" msgstr "accesso agli strumenti RPM" #: any.pm:792 #, c-format msgid "allow \"su\"" msgstr "permettere \"su\"" #: any.pm:793 #, c-format msgid "access to administrative files" msgstr "accesso ai file di amministrazione del sistema" #: any.pm:794 #, c-format msgid "access to network tools" msgstr "accesso agli strumenti di rete" #: any.pm:795 #, c-format msgid "access to compilation tools" msgstr "accesso agli strumenti di compilazione" #: any.pm:801 #, c-format msgid "(already added %s)" msgstr "(%s già aggiunto)" #: any.pm:807 #, c-format msgid "Please give a user name" msgstr "Inserisci il nome di un utente, grazie" #: any.pm:808 #, c-format msgid "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "Il nome utente deve contenere solo lettere minuscole, numeri, \"-\" e \"_\"" #: any.pm:809 #, c-format msgid "The user name is too long" msgstr "Questo nome utente è troppo lungo" #: any.pm:810 #, c-format msgid "This user name has already been added" msgstr "Questo nome utente è già stato utilizzato" #: any.pm:816 any.pm:849 #, c-format msgid "User ID" msgstr "ID utente" #: any.pm:816 any.pm:850 #, c-format msgid "Group ID" msgstr "ID gruppo" #: any.pm:817 #, c-format msgid "%s must be a number" msgstr "%s dev'essere un numero" #: any.pm:818 #, c-format msgid "%s should be above 500. Accept anyway?" msgstr "%s dovrebbe essere superiore a 500. Va accettato lo stesso?" #: any.pm:822 #, c-format msgid "User management" msgstr "Gestione degli utenti" #: any.pm:828 authentication.pm:237 #, c-format msgid "Set administrator (root) password" msgstr "Scegli password amministratore (root)" #: any.pm:833 #, c-format msgid "Enter a user" msgstr "Inserisci un utente" #: any.pm:835 #, c-format msgid "Icon" msgstr "Icona" #: any.pm:838 #, c-format msgid "Real name" msgstr "Vero nome" #: any.pm:843 #, c-format msgid "Login name" msgstr "Nome utente" #: any.pm:848 #, c-format msgid "Shell" msgstr "Shell" #: any.pm:884 #, c-format msgid "Please wait, adding media..." msgstr "Attendere, aggiornamento dei supporti in corso..." #: any.pm:914 security/l10n.pm:14 #, c-format msgid "Autologin" msgstr "Autologin" #: any.pm:915 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "" "Si può configurare il computer per fare automaticamen
@@ -5,7 +5,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2001-08-30 13:19+09:00\n"
"Last-Translator: Dmytro Kovalov <kov@tokyo.email.ne.jp>\n"
"Language-Team: Ukrainian <linux@linux.org.ua>\n"
@@ -13,992 +13,1619 @@ msgstr ""
"Content-Type: text/plain; charset=koi8-u\n"
"Content-Transfer-Encoding: 8bit\n"
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Cancel"
-msgstr "÷¦ÄͦÎÉÔÉ"
+msgid "Scanning partitions to find mount points"
+msgstr "óËÁÎÕ×ÁÎÎÑ Ð¦ÄÒÏÚÄ¦Ì¦× ÄÌÑ ÚÎÁÈÏÄÖÅÎÎÑ ÔÏÞÏË ÍÏÎÔÕ×ÁÎÎÑ"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Launch userdrake"
+msgid "if set to yes, check additions/removals of suid root files."
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
+msgid "\t\tErase=%s"
msgstr ""
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "network printer port"
+msgstr "ðÒÉÎÔÅÒ × ÍÅÒÅÖ¦ (ÓÏËÅÔ)"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Please insert floppy disk:"
+msgstr "÷ÓÔÁ×ÔÅ ÓÉÓÔÅÍÎÕ ÄÉÓËÅÔÕ, ÑËÁ ×ÖÉ×ÁÌÁÓÑ × ÄÉÓËÏ×ÏĦ %s"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
+msgid "PCMCIA"
+msgstr "PCMCIA"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
+"á×ÁÒ¦ÊÎÁ ÔÁÂÌÉÃÑ Ð¦ÄÒÏÚÄ¦Ì¦× ÍÁ¤ ¦ÎÛÉÊ ÒÏÚͦÒ\n"
+"ðÒÏÄÏ×ÖÕ×ÁÔÉ?"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "ñ˦ ÐÁËÅÔÉ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ?"
+msgid "Which username"
+msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Custom"
-msgstr "óÐÅæÁÌØÎÉÊ"
+msgid "Which type of entry do you want to add?"
+msgstr "ñËÉÊ ÔÉÐ ×É ÈÏÞÅÔÅ ÄÏÄÁÔÉ?"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Allow all users"
-msgstr "äÏÄÁÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "÷¦ÄÎÏ×ÉÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×"
-#: ../../any.pm:1
+#: ../../printer/cups.pm:1
#, fuzzy, c-format
-msgid "No sharing"
-msgstr "óÔÁÒÔÕ¤ CUPS"
+msgid "On CUPS server \"%s\""
+msgstr "IP ÁÄÒÅÓÁ CUPS ÓÅÒ×ÅÒÁ"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "More"
-msgstr "ýÅ"
+msgid "Post-install configuration"
+msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ Ð¦ÓÌÑ ÕÓÔÁÎÏ×ËÉ"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Here is the full list of available countries"
-msgstr "ôÕÔ ÎÁ×ÅÄÅÎÏ ÐÏ×ÎÉÊ ÓÐÉÓÏË ÎÁÑ×ÎÉÈ ËÌÁצÁÔÕÒ"
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "úÁͦÓÔØ ÃØÏÇÏ ÓËÏÒÉÓÔÁÊÔÅÓÑ ``%s''"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Please choose your country."
-msgstr "ñËÉÊ ÔÉÐ ÍÉÛ¦ ×É ÍÁ¤ÔÅ?"
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "ôÉÐ"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid " / Region"
-msgstr "òÅΦÏÎ"
+msgid ""
+"\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
+msgstr ""
+"\n"
+"ëÒ¦Í ÔÏÇÏ, ÐÒÉÎÔÅÒÉ ÓËÏÎƦ­ÕÒÏ×ÁΦ ÚÁ ÄÏÐÏÍÏÇÏÀ ÎÁÄÁÎÉÈ ×ÉÒÏÂÎÉËÁÍÉ\n"
+"ÆÁÊÌ¦× PPD ÞÉ ÐÒÉÎÔÅÒÉ, ÝÏ ÍÁÀÔØ Ò¦ÄΦ ÄÒÁÊ×ÅÒÉ CUPS ÎÅ ÍÏÖÕÔØ ÂÕÔÉ\n"
+"ÐÅÒÅÎÅÓÅÎÉÍÉ."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Country"
-msgstr "ëÒÁ§ÎÁ:"
+#: ../../lang.pm:1
+#, c-format
+msgid "Sri Lanka"
+msgstr "ûÒ¦ ìÁÎËÁ"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "All languages"
-msgstr "÷ÉÂÅÒ¦ÔØ ÍÏ×Õ"
+msgid ""
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦!"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use Unicode by default"
-msgstr ""
+msgid "Central African Republic"
+msgstr "ãÅÎÔÒÁÌØÎÁ áÆÒÉËÁÎÓØËÁ òÅÓÐÕÂ̦ËÁ"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+msgid "Gateway device"
+msgstr "ûÌÀÚÏ×ÉÊ ÐÒÉÓÔÒ¦Ê"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Net Method:"
msgstr ""
-"÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÔÁËÏÖ ¦ÎÛ¦ ÍÏ×É, Ñ˦ ÂÕÄÕÔØ ÄÏÓÔÕÐΦ × ÓÉÓÔÅͦ ЦÓÌÑ\n"
-"ÕÓÔÁÎÏ×ËÉ"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Please choose a language to use."
-msgstr "÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÍÏ×Õ."
+msgid "Ethernetcard"
+msgstr "ðÌÁÔÁ Ethernet"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "÷ÉÂÅÒ¦ÔØ ÍÅÎÅÄÖÅÒ ×¦ËÏÎ, ÑËÉÍ ×É ÈÏÞÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ"
+msgid "Parameters"
+msgstr "ðÁÒÁÍÅÔÒÉ"
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Auto-detect"
+msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose the default user:"
-msgstr "÷ÉÂÅÒ¦ÔØ ÓÔÁÎÄÁÒÔÎÏÇÏ ËÏÒÉÓÔÕ×ÁÞÁ:"
+msgid "Interface:"
+msgstr "¶ÎÔÅÒÆÅÊÓ:"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Do you want to use this feature?"
-msgstr "þÉ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ aboot?"
+#: ../../steps.pm:1
+#, c-format
+msgid "Select installation class"
+msgstr "÷ÉÂÅÒ¦ÔØ ÔÉÐ ÕÓÔÁÎÏ×ËÉ"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "on CDROM"
+msgstr ""
+
+#: ../../network/tools.pm:1
#, fuzzy, c-format
-msgid "I can set up your computer to automatically log on one user."
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
msgstr ""
-"ñ ÍÏÖÕ ÎÁÓÔÒϧÔÉ ÷ÁÛÕ ÓÉÓÔÅÍÕ ÔÁË, ÝÏ X ÂÕÄÅ ÓÔÁÒÔÕ×ÁÔÉ Á×ÔÏÍÁÔÉÞÎÏ\n"
-"ЦÓÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ.\n"
-"þÉ ×É ÂÁÖÁ¤ÔÅ ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ Ã¦¤À ÍÏÖÌÉצÓÔÀ?"
+"óÉÓÔÅÍÁ ÚÄÁ¤ÔØÓÑ ÎŠЦÄËÌÀÞÅÎÁ ÄÏ ¦ÎÔÅÒÎÅÔÕ.\n"
+"óÐÒÏÂÕÊÔÅ ÚͦÎÉÔÉ ËÏÎƦÇÕÒÁæÀ Ó×ÏÇÏ Ú'¤ÄÎÁÎÎÑ."
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Autologin"
-msgstr "á×ÔÏÒŤÓÔÒÁæÑ"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Icon"
-msgstr "ð¦ËÔÏÇÒÁÍÁ"
+msgid "Belarus"
+msgstr "â¦ÌÏÒÕÓØ"
-#: ../../any.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Shell"
-msgstr "ëÏÍÁÎÄÎÁ ÏÂÏÌÏÎËÁ"
+msgid "Error writing to file %s"
+msgstr "ðÏÍÉÌËÁ ÐÒÉ ÚÁÐÉÓ¦ Õ ÆÁÊÌ %s"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "ðÁÒÏÌØ (ÝÅ ÒÁÚ)"
+msgid ""
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
+msgstr ""
+"apmd ÓÌÕÖÉÔØ ÄÌÑ ËÏÎÔÒÏÌÀ ÚÁ Ò¦×ÎÅÍ ÂÁÔÁÒŧ ÔÁ ÚÁÐÉÓÕ ÐÏצÄÏÍÌÅÎØ ÐÒÏ\n"
+"ÃÅ Õ ÓÉÓÔÍÎÉÊ ÖÕÒÎÁÌ syslog. ëÒ¦Í ÃØÏÇÏ ×¦Î ÍÏÖÅ ×ÉÍÉËÁÔÉ ËÏÍÐ'ÀÔÅÒ,\n"
+"ËÏÌÉ ÂÁÔÁÒÅÑ ÒÏÚÒÑÄÉÌÁÓÑ."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Password"
-msgstr "ðÁÒÏÌØ"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use tape to backup"
+msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "User name"
-msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
+msgid "The following packages are going to be installed"
+msgstr "㦠ÐÁËÅÔÉ ÂÕÄÕÔØ ×ÓÔÁÎÏ×ÌÅÎÉÍÉ"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS configuration"
+msgstr "ëÏÎƦ­ÕÒÁæÑ"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Real name"
-msgstr "ðÏ×ÎÅ ¦Í'Ñ"
+msgid "Hong Kong"
+msgstr "çÏέ ëÏέ"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Accept user"
-msgstr "ðÒÉÊÎÑÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
+msgid "Not enough free space to allocate new partitions"
+msgstr "îÅÄÏÓÔÁÔÎØÏ ×¦ÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ ÄÌÑ ÎÏ×ÉÈ Ð¦ÄÒÏÚĦ̦×"
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Done"
-msgstr "úÁ˦ÎÞÅÎÏ"
+msgid "Moving"
+msgstr "ðÅÒÅͦÝÅÎÎÑ"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Enter a user\n"
-"%s"
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
msgstr ""
-"÷×ÅĦÔØ ËÏÒÉÓÔÕ×ÁÞÁ\n"
-"%s"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add user"
-msgstr "äÏÄÁÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
+msgid "("
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "This user name has already been added"
-msgstr "ãÅ ¦Í'Ñ ×ÖÅ ÚÁÊÎÑÔÅ"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "The user name is too long"
-msgstr "ãÅ ¦Í'Ñ ×ÖÅ ÚÁÊÎÑÔÅ"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"ìÁÓËÁ×Ï ÐÒÏÓÉÍÏ ÄÏ ÐÏͦÞÎÉËÁ ÕÓÔÁÎÏ×ËÉ ÍÅÒÅÖ¦.\n"
+"\n"
+"úÁÒÁÚ ×ÁÛÁ ÍÅÒÅÖÁ ÔÁ ¦ÎÔÅÒÎÅÔ Ú'¤ÄÎÁÎÎÑ ÂÕÄÕÔØ ÎÁÓÔÒϤΦ. ñËÝÏ ×É ÎÅ\n"
+"ÈÏÞÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓØ Á×ÔÏÍÁÔÉÞÎÉÍ ×ÉÚÎÁÞÅÎÎÑÍ, צÄͦΦÔØ ×ÉÂ¦Ò ÏÐæ§.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgid ")"
msgstr ""
-"¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ ÐÏ×ÉÎÎÏ ÓËÌÁÄÁÔÉÓÑ Ô¦ÌØËÉ Ú ÍÁÌÉÈ ÌÁÔÉÎÓØËÉÈ Ì¦ÔÅÒ,\n"
-"ÞÉÓÅÌ, `-' ÔÁ `_'"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please give a user name"
-msgstr "äÁÊÔÅ, ÂÕÄØ-ÌÁÓËÁ, ¦Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
+msgid "Lebanon"
+msgstr "ì¦×ÁÎ"
-#: ../../any.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "ðÁÒÏÌØ ÚÁÎÁÄÔÏ ÐÒÏÓÔÉÊ"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Stop"
+msgstr "óÅËÔÏÒ"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Edit selected host"
+msgstr "ÚÎÁÊÄÅÎÏ %s"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No CD device defined!"
+msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Bulgarian (phonetic)"
+msgstr "÷¦ÒÍÅÎÓØËÁ (ÆÏÎÅÔÉÞÎÁ)"
+
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Please try again"
-msgstr "âÕÄØ-ÌÁÓËÁ, ÓÐÒÏÂÕÊÔÅ ÝÅ ÒÁÚ"
+msgid "The DHCP start ip"
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "ðÁÒÏ̦ Ò¦ÚΦ"
+msgid "256 kB"
+msgstr "256 ËÂ"
#: ../../any.pm:1
#, c-format
-msgid "(already added %s)"
-msgstr "(×ÖÅ ÓÔ×ÏÒÅÎÉÊ %s)"
+msgid "Bootloader main options"
+msgstr "ïÓÎÏ×Φ ÏÐæ§ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "access to compilation tools"
+msgid ""
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Tape"
+msgstr "ôÉÐ"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Scanning network..."
+msgstr "ðÏÞÉÎÁÀ Ú'¤ÄÎÁÎÎÑ..."
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "access to network tools"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to administrative files"
-msgstr ""
+msgid "Malaysia"
+msgstr "íÁÌÁÚ¦Ñ"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "allow \"su\""
-msgstr ""
+msgid "Swiss (French layout)"
+msgstr "û×ÅÊÃÁÒÓØËÁ (ÆÒÁÎÃÕÚØËÁ ÒÏÚËÌÁÄËÁ)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "access to rpm tools"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "ÚÂ¦Ê Õ mkraid (ÍÏÖÌÉ×Ï ÎÅ ×ÓÔÁÎÏ×ÌÅΦ raidtools?)"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Webcam"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "access to X programs"
+msgid "size of the (second level) cpu cache"
msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Soundcard"
+msgstr "ú×ÕËÏ×Á ÐÌÁÔÁ"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
msgstr ""
-"ôÕÔ ÎÁ×ÅÄÅΦ Ò¦ÚÎÏÍÁΦÔΦ ÐÕÎËÔÉ.\n"
-"×É ÍÏÖÅÔÅ ÁÂÏ ÄÏÄÁÔÉ ÝÅ ÄÅÑ˦, ÁÂÏ ÚͦÎÉÔÉ Ô¦, ÝÏ ×ÖÅ ¦ÓÎÕÀÔØ."
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "¶ÎÛ¦ ÓÉÓÔÅÍÉ (windows...)"
+msgid "Level %s\n"
+msgstr "ò¦×ÅÎØ %s\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "¶ÎÛ¦ ÓÉÓÔÅÍÉ (MacOS...)"
+msgid "Luxembourg"
+msgstr "ìÀËÓÅÍÂÕÒ­"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "¶ÎÛ¦ ÓÉÓÔÅÍÉ (SunOS...)"
+msgid ""
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Iran"
+msgstr "¶ÒÁË"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Linux"
-msgstr "ì¦ÎÁËÓ"
+msgid "Bus"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "ñËÉÊ ÔÉÐ ×É ÈÏÞÅÔÅ ÄÏÄÁÔÉ?"
+msgid "Iraq"
+msgstr "¶ÒÁË"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "This label is already used"
-msgstr "ãÑ ÅÔÉËÅÔËÁ ×ÖÅ ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ"
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "÷ ÄÁÎ¦Ê ËÏÎƦÇÕÒÁæ§ %s ÚÎÁÊÄÅÎÏ ÐÏÔÅÎæÊÎÉÊ ËÏÎÆ̦ËÔ ÁÄÒÅÓÉ ÍÅÒÅÖ¦!\n"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "You must specify a root partition"
-msgstr "÷É ÐÏ×ÉÎΦ ÍÁÔÉ Ð¦ÄÒÏÚÄ¦Ì ÄÌÑ Ó×ÏÐ "
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Configuring..."
+msgstr "ëÏÎƦÇÕÒÁæÑ..."
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "You must specify a kernel image"
+msgid "The setup has already been done, and it's currently enabled."
msgstr ""
+"õÓÔÁÎÏ×ËÁ ÓЦÌØÎÏÇÏ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÖÅ ÚÒÏÂÌÅÎÁ,\n"
+"ÎÁ ÄÁÎÉÊ ÞÁÓ ×ÏÎÏ ÄÏÚ×ÏÌÅÎÏ."
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "îÅ ÄÏÚ×ÏÌÑÀÔØÓÑ ÐÕÓÔ¦ ÅÔÉËÅÔËÉ"
+msgid ""
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
+msgstr ""
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Default"
-msgstr "ïÓÎÏ×ÎÁ"
+msgid "Password (again)"
+msgstr "ðÁÒÏÌØ (ÝÅ ÒÁÚ)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "NoVideo"
-msgstr "âÅÚ÷¦ÄÅÏ"
+msgid "Search installed fonts"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Initrd-size"
-msgstr "òÏÚÍ¦Ò Initrd"
+msgid "Venezuela"
+msgstr "÷ÅÎÅÓÕÅÌÁ"
-#: ../../any.pm:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Append"
-msgstr "ðÒɤÄÎÁÔÉ"
+msgid "IP address"
+msgstr "IP-ÁÄÒÅÓÁ"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Label"
-msgstr "åÔÉËÅÔËÁ"
+msgid "Choose the sizes"
+msgstr "÷ÉÂÅÒ¦ÔØ ÒÏÚͦÒÉ"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unsafe"
-msgstr "îÅÂÅÚÐÅÞÎÏ"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Table"
-msgstr "ôÁÂÌÉÃÑ"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Root"
-msgstr "Root"
+msgid "Choose another partition"
+msgstr "óÔ×ÏÒÉÔÉ ¦ÎÛÉÊ Ð¦ÄÒÏÚĦÌ"
-#: ../../any.pm:1
-#, c-format
-msgid "Read-write"
-msgstr "úÁÐÉÓ/ÞÉÔÁÎÎÑ"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Current user"
+msgstr "ðÒÉÊÎÑÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
-#: ../../any.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username"
+msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "Left \"Windows\" key"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "dhcpd Server Configuration"
+msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦"
+
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Video mode"
-msgstr "÷¦ÄÅÏ ÒÅÖÉÍ"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Image"
-msgstr "ïÂÒÁÚ"
+msgid "Guyana"
+msgstr "½ÁÑÎÁ"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Default OS?"
-msgstr "ïÓÎÏ×ÎÁ ÓÉÓÔÅÍÁ?"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "äÏÚ×ÏÌÉÔÉ ÚÁ×ÁÎÔÁÖÅÎÎÑ OF?"
+msgid "Remove a module"
+msgstr "úÁÂÒÁÔÉ ÍÏÄÕÌØ"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "äÏÚ×ÏÌÉÔÉ ÚÁ×ÁÎÔÁÖÅÎÎÑ Ú ËÏÍÐÁËÔ-ÄÉÓËÕ?"
+msgid "Password"
+msgstr "ðÁÒÏÌØ"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "úÁÔÒÉÍËÁ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÑÄÒÁ"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Advanced Configuration"
+msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Open Firmware Delay"
-msgstr "úÁÔÒÉÍËÁ Open Firmware"
+msgid "Scanning on your HP multi-function device"
+msgstr ""
#: ../../any.pm:1
#, c-format
-msgid "Boot device"
-msgstr "ðÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÅÎÎÑ"
+msgid "Root"
+msgstr "Root"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Init Message"
-msgstr "ðÏצÄÏÍÌÅÎÎÑ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
+msgid "Choose an existing RAID to add to"
+msgstr "÷ÉÂÅÒ¦ÔØ ¦ÓÎÕÀÞÉÊ RAID, ÄÏ ÑËÏÇÏ ÄÏÄÁÔÉ"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bootloader to use"
-msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÚÁ×ÁÎÔÁÖÕ×ÁÞ"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "ôÕÒÅÃØËÁ (ÔÒÁÄÉæÊÎÁ \"Q\" ÍÏÄÅÌØ)"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bootloader main options"
-msgstr "ïÓÎÏ×Φ ÏÐæ§ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ"
+msgid "Lilo message not found"
+msgstr ""
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "ïÐÃ¦Ñ ``ïÂÍÅÖÉÔÉ ÏÐæ§ ËÏÍÁÎÄÎÏÇÏ ÒÑÄËÁ'' ÎÅ ÍÁ¤ ÓÅÎÓÕ ÂÅÚ ÐÁÒÏÌÑ"
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
+"á×ÔÏÍÁÔÉÞÎÅ ÓÔ×ÏÒÅÎÎÑ ÆÁÊÌ¦× ÚÁÇÏÌÏ×Ë¦× ÄÌÑ ÑÄÒÁ × ËÁÔÁÌÏÚ¦ /boot ÄÌÑ\n"
+"/usr/include/linux/{autoconf,version}.h"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "äÁ×ÁÔÉ ÒÏÚÍ¦Ò ÐÁÍ'ÑÔ¦ × íÂ"
+msgid "if needed"
+msgstr "ÑËÝÏ ÐÏÔÒ¦ÂÎÏ"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Failed..."
+msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÆÁÊÌÕ"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _jazz drives"
+msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Enable multiple profiles"
-msgstr "äÏÚ×ÏÌÉÔÉ ÂÁÇÁÔÏÐÒÏƦÌØΦÓÔØ"
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "ôÏÞÎÉÊ ÏÂ'¤Í ÐÁÍ'ÑÔ¦ (RAM). úÎÁÊÄÅÎÏ %d íÂ"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
+"÷ÓÔÕÐ\n"
+"\n"
+"ïÐÅÒÁæÊÎÁ ÓÉÓÔÅÍÁ ÔÁ Ò¦ÚÎÏÍÁΦÔΦ ËÏÍÐÏÎÅÎÔÉ, ÝÏ ÍÁÀÔØÓÑ ×\n"
+"ÄÉÓÔÒÉÂÕÔÉצ ì¦ÎÁËÓ íÁÎÄÒÅÊË ÎÁÄÁ̦ ÍÁÀÔØ Ú×ÁÔÉÓÑ \"ðÒÏÇÒÁÍΦ\n"
+"ÐÒÏÄÕËÔÉ\". ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ×ËÌÀÞÁÀÔØ ÁÌÅ ÎÅ ÏÂÍÅÖÕÀÔØÓÑ ÎÁÂÏÒÁÍÉ\n"
+"ÐÒÏÇÒÁÍ, ÍÅÔÏÄ¦× ÐÒÁ×ÉÌ ÔÁ ÄÏËÕÍÅÎÔÁæ¤À, ÑËÁ ÍÁ¤ צÄÎÏÛÅÎÎÑ ÄÏ\n"
+"ÏÐÅÒÁæÊÎϧ ÓÉÓÔÅÍÉ ÔÁ Ò¦ÚÎÏÍÁΦÔÎÉÈ ÓËÌÁÄÏ×ÉÈ ÞÁÓÔÉÎ ÄÉÓÔÒÉÂÕÔÉ×Á\n"
+"ì¦ÎÁËÓ íÁÎÄÒÅÊËÁ.\n"
+"\n"
+"1. ì¦ÃÅÎÚ¦ÊÎÁ ÕÇÏÄÁ\n"
+"\n"
+"âÕÄØ ÌÁÓËÁ, ÐÒÏÞÉÔÁÊÔÅ ÃÀ ÕÇÏÄÕ Õ×ÁÖÎÏ. ãÅÊ ÄÏËÕÍÅÎÔ ¤ ̦ÃÅÎÚ¦ÊÎÏÀ\n"
+"ÕÇÏÄÏÀ Í¦Ö ÷ÁÍÉ ÔÁ MandrakeSoft S.A., ÑËÁ ÓÔÏÓÕ¤ÔØÓÑ ÐÒÏÇÒÁÍÎÉÈ\n"
+"ÐÒÏÄÕËÔ¦×. ÷ÓÔÁÎÏ×ÌÅÎÎÑÍ, ÄÕÂÌÀ×ÁÎÎÑÍ ÞÉ ×ÉËÏÒÉÓÔÁÎÎÑÍ ðÒÏÇÒÁÍÎÉÈ\n"
+"ÐÒÏÄÕËÔ¦× ÂÕÄØ-ÑËÉÍ ÞÉÎÏÍ, ÷É ÔÉÍ ÓÁÍÉÍ Ñ×ÎÏ ÐÒÉÊÍÁ¤ÔÅ ÎÁ ÐÏ×ΦÓÔÀ\n"
+"ÐÏÇÏÄÖÕ¤ÔÅÓØ Ú ÕÍÏ×ÁÍÉ ÄÁÎϧ ì¦ÃÅÎÚ¦§. ñËÝÏ ÷É ÎÅ ÐÏÇÏÄÖÕ¤ÔÅÓØ Ú\n"
+"ÂÕÄØ-ÑËÏÀ ÞÁÓÔÉÎÏÀ ì¦ÃÅÎÚ¦ÊÎϧ ÕÇÏÄÉ, ÷ÁÍ ÎÅ ÄÏÚ×ÏÌѤÔØÓÑ\n"
+"×ÓÔÁÎÏ×ÌÀ×ÁÔÉ, ÄÕÂÌÀ×ÁÔÉ ÞÉ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ðÒÏÇÒÁÍÎÉÍ\n"
+"ÐÒÏÄÕËÔÏÍ. âÕÄØ-ÑËÁ ÓÐÒÏÂÁ ×ÓÔÁÎÏ×ÌÅÎÎÑ, ÄÕÂÌÀ×ÁÎÎÑ ÞÉ ×ÉËÏÒÉÓÔÁÎÎÑ\n"
+"ðÒÏÇÒÁÍÎÏÇÏ ÐÒÏÄÕËÔÕ ÞÉÎÏÍ, ÑËÉÊ ÎŠצÄÐÏצÄÁ¤ ÕÍÏ×ÁÍ õÇÏÄÉ ×ÉÚÎÁ¤ÔØÓÑ\n"
+"ÐÏÒÕÛÅÎÎÑÍ õÇÏÄÉ ¦, ÔÉÍ ÓÁÍÉÍ ÷É ÐÏÚÂÁ×ÌѤÔÅÓØ ÐÒÁ× ÚÁ æ¤À\n"
+"õÇÏÄÏÀ. ð¦ÓÌÑ ÐÒÉÐÉÎÅÎÎÑ Ä¦§ 椧 õÇÏÄÉ, ÷É ÐÏ×ÉÎΦ ÎÅÇÁÊÎÏ ÚÎÉÝÉÔÉ\n"
+"×Ó¦ ËÏЦ§ ðÒÏÇÒÁÍÎÉÈ ðÒÏÄÕËÔ¦×.\n"
+"\n"
+"2. ïÂÍÅÖÅÎÁ ÇÁÒÁÎÔ¦Ñ\n"
+"\n"
+"ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ÔÁ ÄÏÐÏ×ÎÀÀÞÁ ÄÏËÕÍÅÎÔÁÃ¦Ñ ÐÏÓÔÁ×ÌÑÀÔØÓÑ \"ÑË ¤\",\n"
+"ÂÅÚ ÇÁÒÁÎÔ¦§, × ÍÅÖÁÈ ×ÓÔÁÎÏ×ÌÅÎÉÈ ÚÁËÏÎÏÄÁ×ÓÔ×ÏÍ. î¦ ÚÁ ÑËÉÈ ÕÍÏ×\n"
+"MandrakeSoft S.A. ÎÅ ÂÕÄÅ ÎÅÓÔÉ ×¦ÄÐÏצÄÁÌØÎÏÓÔ¦, × ÍÅÖÁÈ ×ÓÔÁÎÏ×ÌÅÎÉÈ\n"
+"ÚÁËÏÎÏÄÁ×ÓÔ×ÏÍ, ÚÁ ×ÉÐÁÄËÏצ, ÐÒÑͦ ÞÉ ÏÐÏÓÅÒÅÄËÏ×ÁΦ ( ×ËÌÀÞÁÀÞÉ ÁÌÅ\n"
+"ÎÅ ÏÂÍÅÖÕÀÞÉÓØ ×ÔÒÁÔÁÍÉ ÞÉ ÐÅÒÅÐÉÎÁÍÉ Â¦ÚÎÅÓÕ, ƦÎÁÎÓÏ×ÉÍÉ ×ÔÒÁÔÁÍÉ,\n"
+"ÁÄ×ÏËÁÔÓØËÉÍÉ ×ÉÔÒÁÔÁÍÉ ÞÉ ÛÔÒÁÆÁÍÉ, ÑË ÒÅÚÕÌØÔÁÔ ÐÒÉÓÕÄÕ ÓÕÄÏ×ϧ\n"
+"¦ÎÓÔÁÎæ§, ÞÉ ÂÕÄØ-Ñ˦ ¦ÎÛ¦ ×ÔÒÁÔÉ), ÝÏ ÐÏÈÏÄÑÔØ ×¦Ä ×ÉËÏÒÉÓÔÁÎÎÑ,\n"
+"ÁÂÏ, ÎÁ×ÐÁËÉ, ×¦Ä ÎÅÍÏÖÌÉ×ÏÓÔ¦ ×ÉËÏÒÉÓÔÁÎÎÑ ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ, ÎÁצÔØ\n"
+"Õ ×ÉÐÁÄËÕ, ÑËÝÏ MandrakeSoft S.A. ÐÏצÄÏÍÌÑÌÏÓÑ ÐÒÏ ÍÏÖÌÉ×ÏÓÔ¦ ÔÁËÉÈ\n"
+"×ÔÒÁÔ.\n"
+"\n"
+"ïâíåöåîîñ ÷¶äðï÷¶äáìøîïóô¶, úáìåöîï· ÷¶ä ïâìáäáîîñ áâï ÷éëïòéóôáîîñ\n"
+"úáâïòïîåîéè ðòïçòáíîéè ðòïäõëô¶÷ ÷ äåñëéè ëòá·îáè\n"
+"\n"
+"÷ ÍÅÖÁÈ ×ÓÔÁÎÏ×ÌÅÎÉÈ ÚÁËÏÎÏÄÁ×ÓÔ×ÏÍ, MandrakeSoft S.A. ÞÉ ÊÏÇÏ\n"
+"ÄÉÓÔÒÉÂÀÔÏÒÉ Î¦ ÚÁ ÑËÉÈ ÕÍÏ× ÎÅ ÎÅÓÕÔØ ×¦ÄÐÏצÄÁÌØÎÏÓÔ¦ ÚÁ ÖÏÄÎÅ\n"
+"ÎÁ×ÍÉÓÎÅ, ×ÉÐÁÄËÏ×Å, ÐÒÑÍÅ ÞÉ ÏÐÏÓÅÒÅÄËÏ×ÁÎÅ ÐÏÛËÏÄÖÅÎÎÑ, (×ËÌÀÞÁÀÞÉ\n"
+"ÁÌÅ ÎÅ ÏÂÍÅÖÕÀÞÉÓØ ÐÅÒÅÛËÏÄÁÍÉ ÄÌÑ Â¦ÚÎÅÓÕ, ÐÒÉÐÉÎÅÎÎÑÍ Â¦ÚÎÅÓÕ,\n"
+"ƦÎÁÎÓÏ×ÉÍÉ ×ÔÒÁÔÁÍÉ, ÁÄ×ÏËÁÔÓØËÉÍÉ ×ÉÔÒÁÔÁÍÉ ÞÉ ÛÔÒÁÆÁÍÉ, ÑË\n"
+"ÒÅÚÕÌØÔÁÔ ÐÒÉÓÕÄÕ ÓÕÄÏ×ϧ ¦ÎÓÔÁÎæ§, ÞÉ ÂÕÄØ-ÑËÉÍÉ ¦ÎÛÉÍ ×ÔÒÁÔÁÍÉ),\n"
+"Ñ˦ ×ÉÎÉËÁÀÔØ ×¦Ä ÏÂÌÁÄÁÎÎÑ ÞÉ ×ÉËÏÒÉÓÔÁÎÎÑ ÐÒÏÇÒÁÍÎÉÈ ËÏÍÐÏÎÅÎÔ ÞÉ\n"
+"×ÉÎÉËÁÀÔØ ×¦Ä ÚÁ×ÁÎÔÁÖÅÎÎÑ ÚÁÂÏÒÏÎÅÎÉÈ ÚÁËÏÎÏÄÁ×ÓÔ×ÏÍ ÞÉ ÏÂÍÅÖÅÎÉÈ ÄÏ\n"
+"×ÉËÏÒÉÓÔÁÎÎÑ × ÄÅÑËÉÈ ËÒÁ§ÎÁÈ ÐÒÏÇÒÁÍÎÉÈ ËÏÍÐÏÎÅÎÔ ÐÏ ÍÅÒÅÖ¦ Ú ÏÄΦ¤§\n"
+"Ú ÄÏÍÁÛÎ¦È ÓÔÏÒ¦ÎÏË ì¦ÎÁËÓ íÁÎÄÒÅÊË. ãÑ ÏÂÍÅÖÅÎÁ צÄÐÏצÄÁÌØΦÓÔØ\n"
+"×ËÌÀÞÁ¤ ÔÁËÏÖ (ÁÌÅ ÎÅ ÏÂÍÅÖÕ¤ÔØÓÑ) ÔÁË Ú×ÁÎÉÍÉ ÓÉÌØÎÉÍÉ\n"
+"ËÒÉÐÔÏÇÒÁƦÞÎÉÍÉ ÍÅÔÏÄÁÍÉ, Ñ˦ ×ËÌÀÞÅΦ × ðÒÏÇÒÁÍÎÉÊ ÐÒÏÄÕËÔ.\n"
+"\n"
+"3. ì¦ÃÅÎÚ¦Ñ GPL ÔÁ ÐÏĦÂΦ\n"
+"\n"
+"ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ÓËÌÁÄÁÀÔØÓÑ Ú ËÏÍÐÏÎÅÎÔ, ÒÏÚÒÏÂÌÅÎÉÈ Ò¦ÚÎÉÍÉ\n"
+"ƦÚÉÞÎÉÍÉ ÞÉ ÀÒÉÄÉÞÎÉÍÉ ÏÓÏÂÁÍÉ. â¦ÌØÛ¦ÓÔØ ËÏÍÐÏÎÅÎÔ ËÅÒÕÀÔØÓÑ\n"
+"ÔÅÒͦÎÁÍÉ ÔÁ ÕÍÏ×ÁÍÉ ÚÁÇÁÌØÎϧ ÐÕÂ̦ÞÎϧ ̦ÃÅÎÚ¦§ GNU (GNU General\n"
+"Public Licence), ÑËÕ ÍÉ ÎÁÄÁ̦ ÂÕÄÅÍÏ ÎÁÚÉ×ÁÔÉ × ÄÁÎÏÍÕ ÄÏËÕÍÅÎÔ¦ GPL,\n"
+"ÁÂÏ ÐÏĦÂÎÉÍÉ ÄÏ ÄÁÎϧ ̦ÃÅÎÚ¦ÑÍÉ. â¦ÌØÛ¦ÓÔØ ÔÁËÉÈ Ì¦ÃÅÎÚ¦Ê â¦ÌØÛ¦ÓÔØ\n"
+"Ú ÃÉÈ Ì¦ÃÅÎÚ¦Ê ÄÏÚ×ÏÌÑÀÔØ ×ÉËÏÒÉÓÔÁÎÎÑ, ÄÕÂÌÀ×ÁÎÎÑ, ÐÒÉÊÎÑÔÔÑ ÔÁ\n"
+"ÐÅÒÅÒÏÚÐÏ×ÓÀÄÖÅÎÎÑ ÓËÌÁÄÏ×ÉÈ ÞÁÓÔÉÎ, Ñ˦ ×ÏÎÉ ÒÅÇÕÌÀÀÔØ. âÕÄØ-ÌÁÓËÁ,\n"
+"ÏÚÎÁÊÏÍÔÅÓØ Õ×ÁÖÎÏ Ú ÔÅÒͦÎÁÍÉ ÔÁ ÕÍÏ×ÁÍÉ Ì¦ÃÅÎÚ¦ÊÎÉÈ ÕÍÏ× ÄÌÑ ËÏÖÎϧ\n"
+"ÓËÌÁÄÏ×ϧ ÞÁÓÔÉÎÉ ÐÅÒÛ, Î¦Ö ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÂÕÄØ-ÑËÕ Ú\n"
+"ÞÁÓÔÉÎ. âÕÄØ-Ñ˦ ÚÁÐÉÔÁÎÎÑ ÓÔÏÓÏ×ÎÏ Ì¦ÃÅÎÚ¦§ ÎÁ ÏËÒÅÍÕ ÓËÌÁÄÏ×Õ\n"
+"ÞÁÓÔÉÎÕ ÍÁÀÔØ ÁÄÒÅÓÕ×ÁÔÉÓÑ Á×ÔÏÒÕ Ã¦¤§ ÓËÌÁÄÏ×ϧ ÞÁÓÔÉÎÉ, Á ÎÅ ÄÏ\n"
+"MandrakeSoft. ðÒÏÇÒÁÍÉ, ÒÏÚÒÏÂÌÅΦ MandrakeSoft S.A. ËÅÒÕÀÔØÓÑ\n"
+"̦ÃÅÎÚ¦¤À GPL. äÏËÕÍÅÎÔÁæÑ, ÒÏÚÒÏÂÌÅÎÁ MandrakeSoft S.A. ËÅÒÕ¤ÔØÓÑ\n"
+"ÓÐÅæÁÌØÎÏÀ ̦ÃÅÎÚ¦¤À. ú×ÅÒΦÔØÓÑ, ÂÕÄØ-ÌÁÓËÁ, ÄÏ ÄÏËÕÍÅÎÔÁæ§ ÚÁ\n"
+"ÐÏÄÒÏÂÉÃÑÍÉ.\n"
+"\n"
+"4. ðÒÁ×Á ¦ÎÔÅÌÅËÔÕÁÌØÎϧ ×ÌÁÓÎÏÓÔ¦\n"
+"\n"
+"÷Ó¦ ÐÒÁ×Á ÎÁ ÓËÌÁÄÏצ ËÏÍÐÏÎÅÎÔÉ ðÒÏÇÒÁÍÎÉÈ ÐÒÏÄÕËÔ¦× ÎÁÌÅÖÁÔØ\n"
+"צÄÐÏצÄÎÉÍ Á×ÔÏÒÁÍ ¦ ÚÁÈÉÝÅΦ ÚÁËÏÎÁÍÉ ÐÒÏ ¦ÎÔÅÌÅËÔÕÁÌØÎÕ ×ÌÁÓΦÓÔØ\n"
+"ÔÁ ÐÒÁ×Á ÎÁ ËÏЦÀ×ÁÎÎÑ, Ñ˦ ÍÁÀÔØ ÚÁÓÔÏÓÕ×ÁÎÎÑ ÄÏ ÐÒÏÇÒÁÍÎÏÇÏ\n"
+"ÚÁÂÅÚÐÅÞÅÎÎÑ. MandrakeSoft S.A. ÚÁÌÉÛÁ¤ ÚÁ ÓÏÂÏÀ ÐÒÁ×Ï ÚͦÎÀ×ÁÔÉ ÞÉ\n"
+"ÁÄÁÐÔÕ×ÁÔÉ ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ÑË × Ã¦ÌÏÍÕ, ÔÁË ¦ ÏËÒÅÍÉÍÉ ÞÁÓÔÉÎÁÍÉ Ú\n"
+"ÂÕÄØ-ÑËÏÀ ÍÅÔÏÀ ¦ ÄÌÑ ÂÕÄØ-ÑËÉÈ Ã¦ÌÅÊ. \"Mandrake\", \"Mandrake Linux\" ÔÁ\n"
+"צÄÐÏצÄΦ ÌÏÇÏÔÉÐÉ ¤ ÔÏÒǦ×ÅÌØÎÉÍÉ ÍÁÒËÁÍÉ MandarakeSoft S.A.\n"
+"\n"
+"5. úÁËÏÎÏÄÁ×ÓÔ×Ï\n"
+"\n"
+"ñËÝÏ ÂÕÄØ-ÑËÉÊ ÒÏÚÄ¦Ì Ã¦¤§ ÕÇÏÄÉ ÐÒÉÚÎÁÎÉÊ ÎÅĦÊÓÎÉÍ, ÔÁËÉÍ, ÝÏ ÎÅ\n"
+"צÄÐÏצÄÁ¤ ÚÁËÏÎÏÄÁ×ÓÔ×Õ ÞÉ ÎÅצÄÐÏצÄÎÉÍ ÝÏÄÏ ÓÕÄÏ×ϧ ÐÏÓÔÁÎÏ×É, ÃÅÊ\n"
+"ÒÏÚÄ¦Ì ÕÇÏÄÉ ×ÉÄÁÌѤÔØÓÑ Ú ÄÁÎÏÇÏ ËÏÎÔÒÁËÔÕ. ÷É ÚÁÌÉÛÁ¤ÔÅÓØ Ú×'ÑÚÁÎÉÍÉ\n"
+"¦ÎÛÉÍÉ ÓÅËæÑÍÉ Ã¦¤§ ÕÇÏÄÉ, Ñ˦ ÝÅ ÍÁÀÔØ ÚÁÓÔÏÓÕ×ÁÎÎÑ. ôÅÒͦÎÉ ÔÁ\n"
+"ÕÍÏ×É Ã¦¤§ ì¦ÃÅÎÚ¦§ ËÅÒÕÀÔØÓÑ úÁËÏÎÏÄÁ×ÓÔ×ÏÍ æÒÁÎæ§. ÷Ó¦ ÓЦÒΦ\n"
+"ÐÉÔÁÎÎÑ ÝÏÄÏ ÔÅÒÍ¦Î¦× ÔÁ ÕÍÏ× Ã¦¤§ ̦ÃÅÎÚ¦§ ÂÕÄÕÔØ ÒÏÚ×'ÑÚÕ×ÁÔÉÓÑ ÐÏ\n"
+"ÍÏÖÌÉ×ÏÓÔ¦ ÐÏÚÁ ÍÅÖÁÍÉ ÓÕÄÏ×ÉÈ ÕÓÔÁÎÏ×. ÷ ËÒÁÊÎ¦È ×ÉÐÁÄËÁÈ ÓЦÒΦ\n"
+"ÐÉÔÁÎÎÑ ÂÕÄÕÔØ ×ÉÒ¦ÛÕ×ÁÔÉÓÑ ×¦ÄÐÏצÄÎÉÍ úÁËÏÎÎÉÍ óÕÄÏÍ ðÁÒÉÖÁ -\n"
+"æÒÁÎæÑ.\n"
+"\n"
+"ú ÂÕÄØ-ÑËÉÍÉ ÐÉÔÁÎÎÑÍÉ ÝÏÄÏ ÃØÏÇÏ ÄÏËÕÍÅÎÔÁ Ú×ÅÒÔÁÊÔÅÓÑ, ÂÕÄØ-ÌÁÓËÁ,\n"
+"ÄÏ MandrakeSoft S.A.\n"
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "ïÞÉÝÁÔÉ /tmp ÐÒÉ ËÏÖÎÏÍÕ ÐÅÒÅ×ÁÎÔÁÖÅÎΦ"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Current interface configuration"
+msgstr "úͦÎÉÔÉ ËÏÎƦÇÕÒÁæÀ ÐÒÉÎÔÅÒÁ"
+
+#: ../../printer/data.pm:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "óÔ×ÏÒÉÔÉ Á×ÁÒ¦ÊÎÕ ÄÉÓËÅÔÕ"
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Line Printer Daemon"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "restrict"
-msgstr "ÏÂÍÅÖÉÔÉ"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"ñËÝÏ ÷É ÍÁ¤ÔÅ ÐÌÁÔÕ ISA, ÚÎÁÞÅÎÎÑ ÎÁ ÎÁÓÔÕÐÎÏÍÕ ÅËÒÁΦ ÍÁÀÔØ ÂÕÔÉ\n"
+"ËÏÒÅËÔÎÉÍÉ.\n"
+"\n"
+"ñËÝÏ ÷É ÍÁ¤ÔÅ ÐÌÁÔÕ PCMCIA, ÷É ÐÏ×ÉÎΦ ÚÎÁÔÉ IRQ ÔÁ IO ÷ÁÛϧ ÐÌÁÔÉ.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do not print any test page"
+msgstr "äÒÕË ÔÅÓÔÏ×ÉÈ ÓÔÏÒ¦ÎÏË"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restrict command line options"
-msgstr "ïÂÍÅÖÉÔÉ ÏÐæ§ ËÏÍÁÎÄÎÏÇÏ ÒÑÄËÁ"
+msgid "Gurmukhi"
+msgstr ""
#: ../../any.pm:1
#, c-format
msgid "Force No APIC"
msgstr ""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr ""
+"ãÅÊ ÐÁÒÏÌØ ÚÁÎÁÄÔÏ ÐÒÏÓÔÉÊ (צΠÐÏ×ÉÎÅÎ ÂÕÔÉ ÈÏÞÁ  %d ̦ÔÅÒ ÚÁ×ÄÏ×ÖËÉ)"
+
+#: ../../standalone.pm:1
#, fuzzy, c-format
-msgid "Enable ACPI"
-msgstr "äÏÚ×ÏÌÉÔÉ ÚÁ×ÁÎÔÁÖÅÎÎÑ Ú ËÏÍÐÁËÔ-ÄÉÓËÕ?"
+msgid "[keyboard]"
+msgstr "ëÌÁצÁÔÕÒÁ"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "ðÁÕÚÁ ÐÅÒÅÄ ÚÁ×ÁÎÔÁÖÅÎÎÑÍ ÏÓÎÏ×Îϧ ÓÉÓÔÅÍÉ"
+msgid "FTP proxy"
+msgstr "ðÒÏËÓ¦ FTP"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Install List"
+msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÆÁÊÌÕ"
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Show only for the selected day"
+msgstr "ðÏËÁÚÕ×ÁÔÉ ÌÉÛÅ ÄÌÑ ÃØÏÇÏ ÄÎÑ"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "compact"
-msgstr "ËÏÍÐÁËÔÎÉÊ"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Compact"
-msgstr "ëÏÍÐÁËÔÎÉÊ"
+msgid "512 kB"
+msgstr "512 ËÂ"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Bootloader installation"
-msgstr "õÓÔÁÎÏ×ËÁ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ"
+msgid "Logs"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "ðÅÒÛÉÊ ÓÅËÔÏÒ ÓÉÓÔÅÍÎÏÇÏ Ð¦ÄÒÏÚĦÌÕ (boot partition)"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "ðÅÒÛÉÊ ÓÅËÔÏÒ ÄÉÓËÕ (MBR)"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "äÅ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÓÔÁÒÔÏ×ÉÊ ÂÌÏË?"
+msgid "What kind of card do you have?"
+msgstr "ñËÉÊ ÔÉÐ ËÁÒÔËÉ ÷É ÍÁ¤ÔÅ"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "õÓÔÁÎÏ×ËÁ LILO/grub"
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "SILO Installation"
-msgstr "õÓÔÁÎÏ×ËÁ SILO"
+msgid "Security"
+msgstr "âÅÚÐÅËÁ"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Skip"
-msgstr "ðÒÏÐÕÓÔÉÔÉ"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "On Floppy"
-msgstr "úÁÐÉÓÁÔÉ ÎÁ ÄÉÓËÅÔÕ"
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "<control>Q"
+msgstr "<control>Q"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "First sector of the root partition"
-msgstr "ðÅÒÛÉÊ ÓÅËÔÏÒ ÓÉÓÔÅÍÎÏÇÏ Ð¦ÄÒÏÚĦÌÕ (boot partition)"
+msgid "Unknown"
+msgstr "îÅצÄÏÍÁ ÍÏÄÅÌØ"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr ""
+
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "Network Configuration"
+msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
+
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
+"ðÒÏÔÏËÏÌ ÄÌÑ ×ÓØÏÇÏ ¦ÎÛÏÇÏ ÓצÔÕ \n"
+" ÂÅÚ D-ËÁÎÁÌÕ (×ÉĦÌÅÎÉÈ Ì¦Î¦Ê)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "óÔ×ÏÒÀÀ ÄÉÓËÅÔÕ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ"
+msgid "Option %s must be a number!"
+msgstr "ðÁÒÁÍÅÔÒ %s ÍÁ¤ ÂÕÔÉ ÞÉÓÌÏÍ!"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "÷ÓÔÁ×ÔÅ ÄÉÓËÅÔÕ × ÄÉÓËÏ×¦Ä %s"
+msgid "Notice"
+msgstr "âÅÚ÷¦ÄÅÏ"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
msgstr ""
-"÷ÉÂÅÒ¦ÔØ ÐÒÉ×¦Ä ÄÉÓËÅÔÉ, ÑËÉÊ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÄÌÑ ÓÔ×ÏÒÅÎÎÑ\n"
-"Á×ÁÒ¦ÊÎϧ ÄÉÓËÅÔÉ"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "äÒÕÇÉÊ ÐÒÉ×¦Ä ÄÉÓËÅÔÉ"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "ðÅÒÛÁ ÄÉÓËÅÔÁ"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr ""
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "ðÅÒÅÐÒÏÛÕÀ, ÎÅÍÁ¤ ÐÒÉ×ÏÄÕ ÄÉÓËÅÔÉ"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "ôÉРЦÄÒÏÚĦ̦×?"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"óÐÅæÁÌØÎÏ ÓÔ×ÏÒÅÎÉÊ ÄÉÓË ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÚÁÂÅÚÐÅÞÉÔØ ÷ÁÍ ÍÏÖÌÉצÓÔØ\n"
-"ÚÁÐÕÓËÕ ÓÉÓÔÅÍÉ ÎÅÚÁÌÅÖÎÏ ×¦Ä Ú×ÉÞÁÊÎÏÇÏ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ. ãÅ ÍÏÖÅ\n"
-"ÚÎÁÄÏÂÉÔÉÓÑ Õ ÔÉÈ ×ÉÐÁÄËÁÈ, ËÏÌÉ ÷É ÎÅ ÂÁÖÁ¤ÔÅ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ LILO (ÁÂÏ\n"
-"grub) × Ó×Ï§Ê ÓÉÓÔÅͦ, ÁÂÏ ËÏÌÉ ¦ÎÛÁ ÏÐÅÒÁæÊÎÁ ÓÉÓÔÅÍÁ \"ÐÅÒÅÔÉÒÁ¤\"\n"
-"LILO, ÁÂÏ ËÏÌÉ LILO ÎÅ ÐÒÁÃÀ¤ Ú ÎÏ×ÏÀ ËÏÎƦÇÕÒÁæ¤À ÁÐÁÒÁÔÎÉÈ\n"
-"ÚÁÓϦ×. á×ÁÒ¦ÊÎÉÊ ÄÉÓË ÍÏÖÅ ÔÁËÏÖ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ ÒÁÚÏÍ Ú Mandrake\n"
-"Á×ÁÒ¦ÊÎÉÍ ÄÉÓËÏÍ, ÝÏ ÒÏÂÉÔØ ×¦ÄÎÏ×ÌÅÎÎÑ ×¦Ä ÓÅÒÊÏÚÎÉÈ ÓÉÓÔÅÍÎÉÈ ËÒÁȦ×\n"
-"ÎÁÂÁÇÁÔÏ ÐÒÏÓÔ¦ÛÉÍ. þÉ ÂÁÖÁ¤ÔÅ ÷É ÓÔ×ÏÒÉÔÉ Á×ÁÒ¦ÊÎÉÊ ÄÉÓË ÄÌÑ Ó×Ϥ§\n"
-"ÓÉÓÔÅÍÉ?\n"
-"%s"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface"
+msgstr "¶ÎÔÅÒÆÅÊÓ"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Options Description:\n"
"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
msgstr ""
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"óÐÅæÁÌØÎÏ ÓÔ×ÏÒÅÎÉÊ ÄÉÓË ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÚÁÂÅÚÐÅÞÉÔØ ÷ÁÍ ÍÏÖÌÉצÓÔØ\n"
-"ÚÁÐÕÓËÕ ÓÉÓÔÅÍÉ ÎÅÚÁÌÅÖÎÏ ×¦Ä Ú×ÉÞÁÊÎÏÇÏ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ. ãÅ ÍÏÖÅ\n"
-"ÚÎÁÄÏÂÉÔÉÓÑ Õ ÔÉÈ ×ÉÐÁÄËÁÈ, ËÏÌÉ ÷É ÎÅ ÂÁÖÁ¤ÔÅ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ SILO ×\n"
-"Ó×Ï§Ê ÓÉÓÔÅͦ, ÁÂÏ ËÏÌÉ ¦ÎÛÁ ÏÐÅÒÁæÊÎÁ ÓÉÓÔÅÍÁ \"ÐÅÒÅÔÉÒÁ¤\" SILO, ÁÂÏ\n"
-"ËÏÌÉ SILO ÎÅ ÐÒÁÃÀ¤ Ú ÎÏ×ÏÀ ËÏÎƦÇÕÒÁæ¤À ÁÐÁÒÁÔÎÉÈ ÚÁÓϦ×. á×ÁÒ¦ÊÎÉÊ\n"
-"ÄÉÓË ÍÏÖÅ ÔÁËÏÖ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ ÒÁÚÏÍ Ú Mandrake Á×ÁÒ¦ÊÎÉÍ ÄÉÓËÏÍ,\n"
-"ÝÏ ÒÏÂÉÔØ ×¦ÄÎÏ×ÌÅÎÎÑ ×¦Ä ÓÅÒÊÏÚÎÉÈ ÓÉÓÔÅÍÎÉÈ ËÒÁÈ¦× ÎÁÂÁÇÁÔÏ\n"
-"ÐÒÏÓÔ¦ÛÉÍ. \n"
-"\n"
-"ñËÝÏ ÷É ÂÁÖÁ¤ÔÅ ÓÔ×ÏÒÉÔÉ Á×ÁÒ¦ÊÎÉÊ ÄÉÓË ÄÌÑ Ó×Ϥ§ ÓÉÓÔÅÍÉ ×ÓÔÁ×ÔÅ\n"
-"ÄÉÓËÅÔÕ × ÐÅÒÛÉÊ ÄÉÓËÏ×¦Ä ¦ ÎÁÔÉÓΦÔØ \"çÁÒÁÚÄ\"."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "äÅ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÓÔÁÒÔÏ×ÉÊ ÂÌÏË?"
+msgid "comma separated strings"
+msgstr "æÏÒÍÁÔÕ×ÁÔÉ Ð¦ÄÒÏÚĦÌÉ"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "ÎÅÄÏÓÔÁÔÎØÏ Í¦ÓÃÑ × /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr ""
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Pidsvichena systema zavantazhyt'sja avtomatichno cherez %d sekund."
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Messages"
+msgstr "ÐÏצÄÏÍÌÅÎÎÑ"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr ""
-"komandy pered zavantazhennjam, ta 'c' dlja perehodu v komandnyj rezhim."
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Natysnit' enter shchob zavantazhyty vibranu systemu, 'e' shchob redaguvaty"
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "POP and IMAP Server"
+msgstr "óÅÒ×ÅÒ LDAP"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Dlja vyboru pidsvichenogo punktu korystujtesja klavishamy %c ta %c."
+msgid "Mexico"
+msgstr "íÅËÓÉËÁ"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Laskavo prosymo do prohramy vyboru operacijnoyi systemy GRUB!"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "ÆÏÒÍÁÔÕ×ÁÎÎÑ"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaoot"
+msgid "Rwanda"
+msgstr "òÕÁÎÄÁ"
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "þÉ ×É ÍÁ¤ÔÅ ÂÕÄØ-Ñ˦ %s ¦ÎÔÅÒÆÅÊÓÉ?"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO Ú ÔÅËÓÔÏ×ÉÍ ÍÅÎÀ"
+msgid "Switzerland"
+msgstr "û×ÅÊÃÁÒ¦Ñ"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO Ú ÇÒÁƦÞÎÉÍ ÍÅÎÀ"
+msgid "Brunei Darussalam"
+msgstr "âÒÕÎÅÊÓØËÉÊ äÁÒÕÓÓÁÌÁÍ"
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "ïÐæ§ צÄÄÁÌÅÎÏÇÏ ÐÒÉÎÔÅÒÁ"
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-"Laskavo prosymo do %s - peremykacha operaciynih system!\n"
+"GNU/Linux - ÂÁÇÁÔÏËÏÒÉÓÔÕ×ÁÃØËÁ ÓÉÓÔÅÍÁ, ¦ ÃÅ ÏÚÎÁÞÁ¤, ÝÏ ËÏÖÅÎ Ú\n"
+"ËÏÒÉÓÔÕ×ÁÞ¦× ÍÏÖÅ ÍÁÔÉ Ó×ϧ ×ÌÁÓΦ ÕÓÔÁÎÏ×ËÉ, ×ÌÁÓΦ ÆÁÊÌÉ, ÔÏÝÏ. ýÏÂ\n"
+"¦ÌØÛŠĦÚÎÁÔÉÓÑ ÐÒÏ ÃÅ ÷É ÍÏÖÅÔÅ ÐÒÏÞÉÔÁÔÉ ð¦ÄÒÕÞÎÉË ËÏÒÉÓÔÕ×ÁÞÁ Ú\n"
+"ÓÉÓÔÅÍÉ. áÌÅ ÎÁ צÄͦÎÕ ×¦Ä ËÏÒÉÓÔÕ×ÁÞÁ Root, ÑËÉÊ ¤ ÁÄͦΦÓÔÒÁÔÏÒÏÍ\n"
+"ÓÉÓÔÅÍÉ, ËÏÒÉÓÔÕ×ÁÞ¦, ÑËÉÈ ÷É ÂÕÄÅÔÅ ÓÔ×ÏÒÀ×ÁÔÉ ÎÁ ÃØÏÍÕ ËÒÏæ, ÎÅ\n"
+"ÍÁÀÔØ ÐÒÁ×Á ÚͦÎÀ×ÁÔÉ Î¦ÞÏÇÏ × ÓÉÓÔÅͦ ËÒ¦Í Ó×Ï§È ×ÌÁÓÎÉÈ ÆÁÊÌ¦× ¦\n"
+"×ÌÁÓÎϧ ËÏÎƦ­ÕÒÁæ§. ÷É ÍÁ¤ÔÅ ÓÔ×ÏÒÉÔÉ ÒÁÈÕÎÏË ÄÌÑ ÈÏÞÁ  ÏÄÎÏÇÏ\n"
+"¤ÄÉÎÏÇÏ ËÏÒÉÓÔÕ×ÁÞÁ - ÄÌÑ ÓÁÍÏÇÏ ÓÅÂÅ. ÷É ÂÕÄÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÃÉÍ\n"
+"ÒÁÈÕÎËÏÍ ÄÌÑ ÔÏÇÏ, ÝÏ ×ÉËÏÎÕ×ÁÔÉ ÝÏÄÅÎΦ ÚÁÄÁÞ¦. ¶ ÈÏÞÁ ÃÅ ¦ ÄÕÖÅ\n"
+"ÚÒÕÞÎÏ ÒŤÓÔÒÕ×ÁÔÉÓØ × ÓÉÓÔÅͦ ÑË Root, ÁÌÅ ÏÄÎÏÞÁÓÎÏ ÃÅ ¦ ÄÕÖÅ\n"
+"ÎÅÂÅÚÐÅÞÎÏ! îÁÊÍÅÎÛÁ ÐÏÍÉÌËÁ ÍÏÖÅ ÐÒÉÚ×ÅÓÔÉ ÄÏ ÔÏÇÏ, ÝÏ ÓÉÓÔÅÍÁ ÂÕÄÅ\n"
+"ÎÅÒÏÂÏÞÏÀ. ñËÝÏ ÷É ÐÏÍÉÌÉÔÅÓØ ÑË Ú×ÉÞÁÊÎÉÊ ËÏÒÉÓÔÕ×ÁÞ, ÷É ÍÏÖÅÔÅ,\n"
+"Ú×ÉÞÁÊÎÏ, ×ÔÒÁÔÉÔÉ ÄÅÑ˦ Ó×ϧ ÄÁΦ, ÁÌÅ ÎÅ ×ÓÀ ÓÉÓÔÅÍÕ.\n"
"\n"
-"Vyberit' odnu z operaciynikh system v spysku abo pochekajte %d sekund\n"
-"poki pochne vantazhytysja persha z inh.\n"
+"óÐÏÞÁÔËÕ ÎÁÄÒÕËÕÊÔÅ Ó×Ϥ ÐÏ×ÎÅ ¦Í'Ñ. ãÅ ÎÅ ÏÂÏ×'ÑÚËÏ×Ï, ÷É ÍÏÖÅÔÅ\n"
+"ÎÁÄÒÕËÕ×ÁÔÉ ×ÓÅ, ÝÏ ÚÁ×ÇÏÄÎÏ. drakx ÐÏÔ¦Í ×¦ÚØÍÅ ÐÅÒÛÅ ÓÌÏ×Ï ¦\n"
+"×ÉËÏÒÉÓÔÁ¤ ÊÏÇÏ ÑË ¦Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ. ãÅ - ¦Í'Ñ Ð¦Ä ÑËÉÍ ËÏÒÉÓÔÕ×ÁÞ\n"
+"ÂÕÄÅ ÒŤÓÔÒÕ×ÁÔÉÓØ Õ ÓÉÓÔÅͦ. ÷É ÍÏÖÅÔÅ ÚͦÎÉÔÉ ÃÅ ¦Í'Ñ. ðÏÔ¦Í ÷É\n"
+"ÍÁ¤ÔÅ ××ÅÓÔÉ ÐÁÒÏÌØ. ðÁÒÏÌØ Ú×ÉÞÁÊÎÏÇÏ (ÎÅ root) ËÏÒÉÓÔÕ×ÁÞÁ ÎÅ ÔÁËÁ\n"
+"ËÒÉÔÉÞÎÁ Ò¦Þ, ÑË ÐÁÒÏÌØ ÁÄͦΦÓÔÒÁÔÏÒÁ, ÁÌÅ ×ÓÅ-ÏÄÎÏ ÎÅÍÁ¤ ÐÒÉÞÉÎ ÄÌÑ\n"
+"ÔÏÇÏ, ÝÏ ÎÅÈÔÕ×ÁÔÉ ÎÉÍ. ÷ÒÅÛÔ¦-ÒÅÛÔ, ÃÅ ÚÁÇÒÏÖÕ¤ ÷ÁÛÉÍ ×ÌÁÓÎÉÍ\n"
+"ÆÁÊÌÁÍ. \n"
"\n"
+"ð¦ÓÌÑ ÔÏÇÏ, ÑË ÷É ÎÁÔÉÓÎÅÔÅ ÎÁ ËÎÏÐËÕ ðÒÉÊÎÑÔÉ ËÏÒÉÓÔÕ×ÁÞÁ, ÷É ÍÏÖÅÔÅ\n"
+"ÓÔ×ÏÒÉÔÉ ÝÅ ÂÁÇÁÔÏ ¦ÎÛÉÈ ËÏÒÉÓÔÕ×ÁÞ¦×. óÔ×ÏÒ¦ÔØ ÒÁÈÕÎËÉ ÄÌÑ ËÏÖÎÏÇÏ Ú\n"
+"÷ÁÛÉÈ ÄÒÕÚ¦×, ÄÌÑ ÔÁÔÁ Ê ÓÅÓÔÒÉ, ÎÁÐÒÉËÌÁÄ. ð¦ÓÌÑ ÔÏÇÏ, ÑË ÓÔ×ÏÒÅÎÏ\n"
+"×Ó¦ ÐÏÔÒ¦ÂΦ ÒÁÈÕÎËÉ ËÏÒÉÓÔÕ×ÁÞ¦×, ÎÁÔÉÓΦÔØ ËÌÁצÛÕ úÁ˦ÎÞÅÎÏ.\n"
+"\n"
+"ñËÝÏ ÷É ÎÁÔÉÓÎÅÔÅ ÎÁ ËÎÏÐËÕ äÏÄÁÔËÏ×Ï, ÷É ÂÕÄÅÔÅ ÍÁÔÉ ÍÏÖÌÉצÓÔØ\n"
+"×ÓÔÁÎÏ×ÉÔÉ ËÏÍÁÎÄÎÕ ÏÂÏÌÏÎËÕ ÄÁÎÏÇÏ ËÏÒÉÓÔÕ×ÁÞÁ (ÎÅÑ×ÎÏ ×ÓÔÁÎÏ×ÌÀ¤ÔØÓÑ\n"
+"bash). "
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "consolehelper missing"
-msgstr ""
+msgid "Configure Internet Access..."
+msgstr "îÁÓÔÒϧÔÉ ÄÏÓÔÕÐ ÄÏ ¦ÎÔÅÒÎÅÔÕ..."
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Norway"
+msgstr "îÏÒ×ÅÚØËÁ"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "ÎÅÍÁ¤ kdesu"
+msgid "Danish"
+msgstr "äÁÔÓØËÁ"
-#: ../../common.pm:1
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
msgstr ""
-"÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÔÁËÏÖ ¦ÎÛ¦ ÍÏ×É, Ñ˦ ÂÕÄÕÔØ ÄÏÓÔÕÐΦ × ÓÉÓÔÅͦ ЦÓÌÑ\n"
-"ÕÓÔÁÎÏ×ËÉ"
+"á×ÔÏÍÁÔÉÞÎÏ ×ËÌÀÞÉÔÉ NumLock ÎÁ ËÏÎÓÏ̦ ¦ × XFree \n"
+"ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
-#: ../../common.pm:1
+#: ../../network/network.pm:1
+#, c-format
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"÷×ÅĦÔØ, ÂÕÄØ-ÌÁÓËÁ, ËÏÎƦÇÕÒÁæÀ IP ÄÌÑ Ã¦¤§ ÍÁÛÉÎÉ. ëÏÖÅÎ ÐÕÎËÔ\n"
+"ÔÒÅÂÁ ××ÏÄÉÔÉ ÑË IP ÁÄÒÅÓÕ × ÔÏÞËÏ×Ï-ÄÅÓÑÔËÏ×¦Ê ÎÏÔÁæ§ (ÑË,\n"
+"ÎÁÐÒÉËÌÁÄ, 1.2.3.4)"
+
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "îÅ ÍÏÖÕ ÄÏÄÁÔÉ ÖÏÄÎÏÇÏ Ð¦ÄÒÏÚĦÌÕ"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"äÉÓÔÒÉÂÕÔÉ× íÁÎÄÒÅÊË ì¦ÎÁËÓ ÒÏÚͦÝÅÎÉÊ ÎÁ ˦ÌØËÏÈ\n"
+"ËÏÍÐÁËÔ-ÄÉÓËÁÈ. íÏÖÌÉ×Ï, drakX ×ÉÂÒÁ× ÐÁËÅÔÉ, ÝÏ ÚÎÁÈÏÄÑÔØÓÑ ÎÁ ¦ÎÛÉÈ\n"
+"ÄÉÓËÁÈ (צÄͦÎÎÉÈ ×¦Ä ÕÓÔÁÎÏ×ÏÞÎÏÇÏ). ëÏÌÉ ÄÌÑ ÕÓÔÁÎÏ×ËÉ ÂÕÄÅ ÐÏÔÒ¦ÂÅÎ\n"
+"¦ÎÛÉÊ ÄÉÓË, ÐÒÏÇÒÁÍÁ ×ÉÔÑÇÎÅ ÄÁÎÉÊ ËÏÍÐÁËÔ-ÄÉÓË ¦ ÐÏÐÒÏÓÉÔØ ×ÓÔÁ×ÉÔÉ\n"
+"ÐÏÔÒ¦ÂÎÉÊ. "
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "%d ÓÅËÕÎÄ"
+msgid "Processors"
+msgstr ""
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "1 minute"
-msgstr "1 È×ÉÌÉÎÁ"
+msgid "Bulgaria"
+msgstr "âÏÌÇÁÒ¦Ñ"
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No NIC selected!"
+msgstr "îÅÍÁ¤ Ú'¤ÄÎÁÎÎÑ"
+
+#: ../../lang.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d È×ÉÌÉÎ"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "ó×ÁÌØÂÁÒĦÊÓØ˦ ¦ ñÎ íÁÊÅÎØÓ˦ ÏÓÔÒÏ×É"
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "TB"
-msgstr "ôÂ"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
-#: ../../common.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "GB"
-msgstr "½Â"
+msgid "partition %s is now known as %s"
+msgstr ""
-#: ../../common.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup Other files..."
+msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "MB"
-msgstr "íÂ"
+msgid "SMB server IP"
+msgstr "IP ÁÄÒÅÓÁ SMB ÓÅÒ×ÅÒÁ"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "KB"
-msgstr "ËÂ"
+msgid "Congo (Kinshasa)"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "United States"
-msgstr "óÐÏÌÕÞÅΦ ÛÔÁÔÉ"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "ôÁÂÌÉÃÑ Ð¦ÄÒÏÚÄ¦Ì¦× ÄÉÓËÕ %s ÂÕÄÅ ÚÁÐÉÓÁÎÏ ÎÁ ÄÉÓË"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Austria"
-msgstr "ÐÏÓ̦ÄÏ×ÎÉÊ"
+msgid "Installing HPOJ package..."
+msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÕ %s"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Italy"
-msgstr "¶ÔÁ̦ÊÓØËÁ"
+#: ../../any.pm:1
+#, c-format
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"óÐÅæÁÌØÎÏ ÓÔ×ÏÒÅÎÉÊ ÄÉÓË ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÚÁÂÅÚÐÅÞÉÔØ ÷ÁÍ ÍÏÖÌÉצÓÔØ\n"
+"ÚÁÐÕÓËÕ ÓÉÓÔÅÍÉ ÎÅÚÁÌÅÖÎÏ ×¦Ä Ú×ÉÞÁÊÎÏÇÏ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ. ãÅ ÍÏÖÅ\n"
+"ÚÎÁÄÏÂÉÔÉÓÑ Õ ÔÉÈ ×ÉÐÁÄËÁÈ, ËÏÌÉ ÷É ÎÅ ÂÁÖÁ¤ÔÅ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ LILO (ÁÂÏ\n"
+"grub) × Ó×Ï§Ê ÓÉÓÔÅͦ, ÁÂÏ ËÏÌÉ ¦ÎÛÁ ÏÐÅÒÁæÊÎÁ ÓÉÓÔÅÍÁ \"ÐÅÒÅÔÉÒÁ¤\"\n"
+"LILO, ÁÂÏ ËÏÌÉ LILO ÎÅ ÐÒÁÃÀ¤ Ú ÎÏ×ÏÀ ËÏÎƦÇÕÒÁæ¤À ÁÐÁÒÁÔÎÉÈ\n"
+"ÚÁÓϦ×. á×ÁÒ¦ÊÎÉÊ ÄÉÓË ÍÏÖÅ ÔÁËÏÖ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ ÒÁÚÏÍ Ú Mandrake\n"
+"Á×ÁÒ¦ÊÎÉÍ ÄÉÓËÏÍ, ÝÏ ÒÏÂÉÔØ ×¦ÄÎÏ×ÌÅÎÎÑ ×¦Ä ÓÅÒÊÏÚÎÉÈ ÓÉÓÔÅÍÎÉÈ ËÒÁȦ×\n"
+"ÎÁÂÁÇÁÔÏ ÐÒÏÓÔ¦ÛÉÍ. þÉ ÂÁÖÁ¤ÔÅ ÷É ÓÔ×ÏÒÉÔÉ Á×ÁÒ¦ÊÎÉÊ ÄÉÓË ÄÌÑ Ó×Ϥ§\n"
+"ÓÉÓÔÅÍÉ?\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "çÏÌÁÎĦÑ"
+msgid ", USB printer \\#%s"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Sweden"
-msgstr "äÉ×ÉÓØ"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Latvian"
+msgstr "ìÁÔצÊÓØËÁ"
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Norway"
-msgstr "îÏÒ×ÅÚØËÁ"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "monthly"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Module name"
+msgstr "îÁÚ×Á ÍÏÄÕÌÑ"
+
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Greece"
-msgstr "çÒÅÃØËÁ"
+msgid "Start at boot"
+msgstr "óÔÁÒÔÕ×ÁÔÉ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Germany"
-msgstr "î¦ÍÅÞÞÉÎÁ"
+msgid "Use Incremental Backups"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Czech Republic"
-msgstr "þÅÛÓØËÁ ÒÅÓÐÕÂ̦ËÁ"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "Belgium"
-msgstr "âÅÌØǦÊÓØËÁ"
+msgid "First sector of drive (MBR)"
+msgstr "ðÅÒÛÉÊ ÓÅËÔÏÒ ÄÉÓËÕ (MBR)"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "France"
-msgstr "æÒÁÎæÑ"
+msgid "Joystick"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Costa Rica"
-msgstr "ëÏÓÔÁ-ò¦ËÁ"
+msgid "El Salvador"
+msgstr "åÌØ óÁÌØ×ÁÄÏÒ"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "îÅ ÍÏÖÕ ×¦ÄËÒÉÔÉ %s ÎÁ ÚÁÐÉÓ: %s"
+msgid "Use Unicode by default"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Nothing to do"
+msgid "the module of the GNU/Linux kernel that handles the device"
msgstr ""
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "îÅÄÏÓÔÁÔÎØÏ ×¦ÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ ÄÌÑ Á×ÔÏÍÁÔÉÞÎÏÇÏ ÐÏĦÌÕ"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Trying to rescue partition table"
+msgstr "ðÒÏÂÕÀ צÄÎÏ×ÉÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×"
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "äÌÑ ÔÏÞËÉ ÍÏÎÔÕ×ÁÎÎÑ %s ÎÅ ÍÏÖÎÁ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÌÏǦÞÎÉÍ ÔÏÍÏÍ LVM"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be an integer number!"
+msgstr "ðÁÒÁÍÅÔÒ %s ÍÁ¤ ÂÕÔÉ Ã¦ÌÉÍ ÞÉÓÌÏÍ!"
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
+#: ../../interactive/stdio.pm:1
+#, c-format
msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"äÌÑ Ã¦¤§ ÔÏÞËÉ ÍÏÎÔÕ×ÁÎÎÑ ÷ÁÍ ÐÏÔÒ¦ÂÎÁ ÓÐÒÁ×ÖÎÑ ÆÁÊÌÏ×Á ÓÉÓÔÅÍÁ (ext2,\n"
-"reiserfs)\n"
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "ãÅÊ ËÁÔÁÌÏÇ ÍÁ¤ ÚÎÁÈÏÄÉÔÉÓØ ÎÁ ËÏÒÅÎÅ×¦Ê ÆÁÊÌÏ×¦Ê ÓÉÓÔÅͦ"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "îÅ ÍÏÖÕ ÓÔÁÒÔÕ×ÁÔÉ \"ÖÉ×Å ÐÏÎÏ×ÌÅÎÎÑ\"!!!\n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "äÌÑ ÔÏÞËÉ ÍÏÎÔÕ×ÁÎÎÑ %s ÎÅ ÍÏÖÎÁ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÌÏǦÞÎÉÍ ÔÏÍÏÍ LVM"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"÷ ÑËÏÓÔ¦ ЦÄÒÏÚĦÌÁ ÄÌÑ root (/) ×É ×ÉÂÒÁÌÉ ÐÒÏÇÒÁÍÎÉÊ RAID.\n"
-"úÁ×ÁÎÔÁÖÕ×ÁÞ¦ ÎÅ ÍÖÏÕÔØ ÐÒÁÃÀ×ÁÔÉ Ú ÔÁËÉÍÉ Ð¦ÄÒÏÚĦÌÁÍÉ ÂÅÚ Ð¦ÄÒÏÚĦÌÕ\n"
-"/boot. ôÏÖ, ÂÕÄØ-ÌÁÓËÁ, ÎÅ ÚÁÂÕÄØÔÅ ÄÏÄÁÔÉ Ð¦ÄÒÏÚÄ¦Ì /boot."
+msgid "Name: "
+msgstr "îÁÚ×Á: "
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "÷ÖÅ ¤ ЦÄÒÏÚÄ¦Ì Ú ÔÏÞËÏÀ ÍÏÎÔÕ×ÁÎÎÑ %s\n"
+msgid "16 million colors (24 bits)"
+msgstr "16 ͦÌØÊÏÎ¦× ËÏÌØÏÒ¦× (24 ¦Ô)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr ""
-"îÁÚ×Á ÐÒÉÎÔÅÒÁ ÍÁ¤ ÓËÌÁÄÁÔÉÓÑ Ô¦ÌØËÉ Ú Ì¦ÔÅÒ, ÃÉÆÒ ÔÁ ÓÉÍ×ÏÌÁ ЦÄËÒÅÓÌÅÎÎÑ."
+msgid "Allow all users"
+msgstr "äÏÄÁÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
-#: ../../fsedit.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "ôÏÞËÁ ÍÏÎÔÕ×ÁÎÎÑ ÐÏ×ÉÎÎÁ ÐÏÞÉÎÁÔÉÓÑ Ú /"
+msgid "The official MandrakeSoft Store"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "ReiserFS ÎÅ ÍÏÖÎÁ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÎÁ ЦÄÒÏÚĦÌÁÈ ÒÏÚͦÒÏÍ ÍÅÎÛÅ 32íÂ."
+msgid "Resizing"
+msgstr "úͦÎÀÀ ÒÏÚͦÒ"
-#: ../../fsedit.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "JFS ÎÅ ÍÏÖÎÁ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÎÁ ЦÄÒÏÚĦÌÁÈ ÒÏÚͦÒÏÍ ÍÅÎÛÅ 16íÂ."
+msgid "Cable connection"
+msgstr "ëÁÂÅÌØÎÅ Ú'¤ÄÎÁÎÎÑ"
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "User"
+msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
#: ../../fsedit.pm:1
#, fuzzy, c-format
@@ -1017,1113 +1644,256 @@ msgstr ""
"\n"
"÷É ÐÏÇÏÄÖÕ¤ÔÅÓØ ×ÔÒÁÔÉÔÉ ×Ó¦ ЦÄÒÏÚĦÌÉ?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "ðÏÍÉÌËÁ"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
-#: ../../fsedit.pm:1
-#, c-format
-msgid "server"
-msgstr "ÓÅÒ×ÅÒ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer on parallel port \\#%s"
+msgstr "îÁÚ×Á ÈÏÓÔÁ ÐÒÉÎÔÅÒÁ"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Name"
+msgstr "îÁÚ×Á: "
+
+#: ../../raid.pm:1
#, c-format
-msgid "with /usr"
-msgstr ""
+msgid "mkraid failed"
+msgstr "ÚÂ¦Ê Õ mkraid"
-#: ../../fsedit.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "simple"
-msgstr "ÐÒÏÓÔÉÊ"
+msgid "Button 3 Emulation"
+msgstr "åÍÕÌÑÃ¦Ñ 3 ËÌÁצÛ"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Enabling swap partition %s"
-msgstr "æÏÒÍÁÔÕ×ÁÎÎÑ Ð¦ÄÒÏÚĦÌÕ %s"
+msgid "Sending files..."
+msgstr "úÁÐÉÓÁÔÉ × ÆÁÊÌ"
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "ÐÏÍÉÌËÁ ÒÏÚÍÏÎÔÕ×ÁÎÎÑ %s: %s"
+msgid "Israeli (Phonetic)"
+msgstr "¶ÚÒÁ§ÌØÓØËÁ (ÆÏÎÅÔÉÞÎÁ)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
+msgid "access to rpm tools"
msgstr ""
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Mounting partition %s"
-msgstr "æÏÒÍÁÔÕ×ÁÎÎÑ Ð¦ÄÒÏÚĦÌÕ %s"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "edit"
+msgstr ""
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Checking %s"
-msgstr "÷ÉÄÁÌÅÎÎÑ LPD..."
+msgid "You must choose/enter a printer/device!"
+msgstr "÷×ÅĦÔØ URI ÐÒÉÓÔÒÏÀ ÐÒÉÎÔÅÒÁ"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "æÏÒÍÁÔÕ×ÁÎÎÑ Ð¦ÄÒÏÚĦÌÕ %s"
+msgid "Permission problem accessing CD."
+msgstr ""
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "óÔ×ÏÒÀÀ ÔÁ ÆÏÒÍÁÔÕÀ ÆÁÊÌ %s"
+msgid "Phone number"
+msgstr "îÏÍÅÒ ÔÅÌÅÆÏÎÕ"
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "îÅ ÚÎÁÀ ÑË ÆÏÒÍÁÔÕ×ÁÔÉ %s ÔÉÐÕ %s"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr ""
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ÆÏÒÍÁÔÕ×ÁÎÎÑ %s ×ÔÒÁÞÅÎÏ"
+msgid "Printer name, description, location"
+msgstr "îÁÚ×Á, ÏÐÉÓ, ÒÏÚÔÁÛÕ×ÁÎÎÑ ÐÒÉÎÔÅÒÁ"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (broadcast)"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"ëÌÁÃΦÔØ ÎÁ ËÎÏÐæ \"çÁÒÁÚÄ\", ÑËÝÏ ×É ÈÏÞÅÔÅ ÓÔÅÒÔÉ ×Ó¦ ÄÁΦ ÔÁ\n"
-"ЦÄÒÏÚĦÌÉ ÎÁ ÃØÏÍÕ ÖÏÒÓÔËÏÍÕ ÄÉÓËÕ. âÕÄØÔÅ Õ×ÁÖΦ: ЦÓÌÑ ÔÏÇÏ, ÑË ÷É\n"
-"ÎÁÔÉÓÎÅÔÅ ÎÁ \"çÁÒÁÚÄ\" ×É ÎÅ ÚÍÏÖÅÔŠצÄÎÏ×ÉÔÉ ÖÏÄΦ ÄÁΦ ÞÉ\n"
-"ЦÄÒÏÚĦÌÉ, Ñ˦ ÍÁÀÔØÓÑ ÎÁ ÃØÏÍÕ ÄÉÓËÕ, ×ËÌÀÞÁÀÞÉ ÔÁËÏÖ ¦ ÄÁΦ\n"
-"÷¦ÎÄÏ×Ó.\n"
-"\n"
-"ñËÝÏ ÷É ×ÉÒ¦ÛÉÌÉ ×¦ÄͦÎÉÔÉ ÃÀ ÏÐÅÒÁæÀ, ÎÁÔÉÓΦÔØ ËÌÁצÛÕ\n"
-"÷¦ÄͦÎÉÔÉ. ð¦ÄÒÏÚĦÌÉ ¦ ÄÁΦ ÎÁ ÄÉÓËÕ ÚÁÌÉÛÁÔØÓÑ ÂÅÚ ÚͦÎ."
+"Please choose the\n"
+"media for backup."
+msgstr "÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÍÏ×Õ."
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"÷ÉÂÅÒ¦ÔØ ÖÏÒÓÔËÉÊ ÄÉÓË, ÑËÉÊ ×É ÈÏÞÅÔÅ ÐÅÒÅÆÏÒÍÁÔÕ×ÁÔÉ ÝÏ ×ÓÔÁÎÏ×ÉÔÉ\n"
-"ÎÏ×ÉÊ Ð¦ÄÒÏÚÄ¦Ì ÄÌÑ íÁÎÄÒÅÊË ì¦ÎÁËÓÁ. âÕÄØÔÅ Õ×ÁÖΦ, ÏÓ˦ÌØËÉ ×Ó¦ ÄÁΦ\n"
-"ÂÕÄÕÔØ ÚÎÉÝÅΦ, ¦ צÄÎÏ×ÉÔÉ §È ÂÕÄÅ ÎÅÍÏÖÌÉ×Ï!"
+msgid "Use Xinerama extension"
+msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ ÒÏÚÛÉÒÅÎÎÑÍ Xinerama"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
-msgstr ""
+msgid "Loopback"
+msgstr "ú×ÏÒÏÔΤ ÍÏÎÔÕ×ÁÎÎÑ"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
+"îÅ ÍÏÖÕ ËÏÒÅËÔÎÏ ÚÁ×ÅÒÛÉÔÉ mkbootdisk: \n"
+"%s\n"
+"%s"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, fuzzy, c-format
+msgid "West Europe"
+msgstr "´×ÒÏÐÁ"
+
+#: ../../standalone.pm:1
+#, c-format
msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-"Yaboot - ÃÅ ÚÁ×ÁÎÔÁÖÕ×ÁÞ ÓÉÓÔÅÍÉ ÄÌÑ íÁ˦ÎÔÏÛ¦× îÏ×ÏÇÏ ÔÉÐÕ. ÷¦Î ÍÏÖÅ\n"
-"ÚÁ×ÁÎÔÁÖÕ×ÁÔÉ ÂÕÄØ-ÑËÕ ¦Ú ÓÉÓÔÅÍ: GNU/Linux, MacOS, MacOSX, ÑËÝÏ ×¦Î\n"
-"×ÓÔÁÎÏ×ÌÅÎÉÊ × ÓÉÓÔÅͦ. ÷ ¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦× Ã¦ ÓÉÓÔÅÍÉ ×¦ÒÎÏ\n"
-"×ÉÚÎÁÞÁÀÔØÓÑ ¦ ×ÓÔÁÎÏ×ÌÀÀÔØÓÑ. ñËÝÏ ÃÅ ÎÅ ÔÁË - ÍÏÖÅÔÅ ÄÏÄÁÔÉ ÐÕÎËÔ\n"
-"×ÒÕÞÎÕ ÎÁ ÃØÏÍÕ ÅËÒÁΦ. âÕÄØÔÅ Õ×ÁÖΦ ÐÒÉ ×ÉÂÏÒ¦ ËÏÒÅËÔÎÉÊ\n"
-"ÐÁÒÁÍÅÔÒ¦×. \n"
-"\n"
-"ïÓÎÏ×Φ ÐÁÒÁÍÅÔÒÉ Yaboot:\n"
-"\n"
-" * ðÏצÄÏÍÌÅÎÎÑ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ: ÐÒÏÓÔÅ ÔÅËÓÔÏ×Å ÐÏצÄÏÍÌÅÎÎÑ, ÑËÅ\n"
-"ÄÅÍÏÎÓÔÒÕ¤ÔØÓÑ ÐÅÒÅÄ ÚÁ×ÁÎÔÁÖÅÎÎÑÍ.\n"
-"\n"
-" * ðÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÅÎÎÑ: ×ËÁÚÕ¤ ÎÁ ÔÅ, ÄÅ ÓÁÍÅ ÚÁÐÉÓÕ¤ÔØÓÑ\n"
-"¦ÎÆÏÒÍÁÃ¦Ñ ÐÏÔÒ¦ÂÎÁ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ GNU/Linux. úÁÇÁÌÏÍ, ×ÁÍ ÐÏÔÒ¦ÂÎÏ\n"
-"ÎÁÚÎÁÞÉÔÉ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÉÊ Ð¦ÄÒÏÚÄ¦Ì ÄÌÑ ÔÏÇÏ, ÝÏ ÚÂÅÒ¦ÇÁÔÉ ÃÀ\n"
-"¦ÎÆÏÒÍÁæÀ. \n"
-"\n"
-" * úÁÔÒÉÍËÁ Open Firmware: ÎÁ צÄͦÎÕ ×¦Ä Lilo, ÔÕÔ ¤ Äצ Ò¦ÚÎÉÈ\n"
-"ÐÅÒ¦ÏÄÉ ÚÁÔÒÉÍËÉ × Yaboot. ðÅÒÛÉÊ ÐÅÒ¦ÏÄ ÚÁÔÒÉÍËÉ ×ÉͦÒÀ¤ÔØÓÑ ×\n"
-"ÓÅËÕÎÄÁÈ. ð¦Ä ÞÁÓ ÃØÏÇÏ ÐÅÒ¦ÏÄÕ ÚÁÔÒÉÍËÉ ×É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÚצÄËÉ\n"
-"ÚÁ×ÁÎÔÁÖÕ×ÁÔÉÓÑ: Ú ËÏÍÐÁËÔ-ÄÉÓËÕ, OF, MacOS ÞÉ ì¦ÎÁËÓ.\n"
-"\n"
-" * ðÅÒ¦ÏÄ ÚÁÔÒÉÍËÉ ÐÅÒÅÄ ÚÁ×ÁÎÔÁÖÅÎÎÑÍ ÑÄÒÁ: ÃÅÊ ÐÅÒ¦ÏÄ ÐÏĦÂÎÉÊ ÄÏ\n"
-"ÚÁÔÒÉÍËÉ Lilo. ð¦ÓÌÑ ×ÉÂÏÒÕ ì¦ÎÁËÓÁ, ÚÁÔÒÉÍËÁ ÏÂÞÉÓÌÀ¤ÔØÓÑ × ÄÅÓÑÔÉÈ\n"
-"ÓÅËÕÎÄÉ ÐÅÒÛ, Î¦Ö ÐÏÞÎÅ ÚÁ×ÁÎÔÁÖÕ×ÁÔÉÓÑ ÓÔÁÎÄÁÒÔÎÅ ÑÄÒÏ.\n"
-"\n"
-" * äÏÚ×ÏÌÉÔÉ ÚÁ×ÁÎÔÁÖÅÎÎÑ Ú ËÏÍÐÁËÔ-ÄÉÓËÕ?: ÑËÝÏ ÃÅÊ ÐÁÒÁÍÅÔÒ\n"
-"×ÉÂÒÁÎÏ, ×É ÍÏÖÅÔÅ ÎÁÔÉÓÎÕÔÉ 'C' ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ Ð¦Ä ÞÁÓ ÐÅÒÛÏÇÏ\n"
-"ÐÅÒ¦ÏÄÕ ÚÁÔÒÉÍËÉ.\n"
-"\n"
-" * äÏÚ×ÏÌÉÔÉ ÚÁ×ÁÎÔÁÖÅÎÎÑ OF: ÑËÝÏ ×É ×ÉÂÅÒÅÔÅ ÃÅÊ ÐÁÒÁÍÅÔÒ, ×É\n"
-"ÚÍÏÖÅÔÅ ÎÁÔÉÓÎÕÔÉ 'N' Ð¦Ä ÞÁÓ ÐÅÒÛÏÇÏ ÐÅÒ¦ÏÄÕ ÚÁÔÒÉÍËÉ ÄÌÑ\n"
-"ÚÁ×ÁÎÔÁÖÅÎÎÑ Ú Open Firmware.\n"
-"\n"
-" * óÔÁÎÄÁÒÔÎÁ ïó: ÃÉÍ ×É ÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÓÔÁÎÄÁÒÔÎÕ ÓÉÓÔÅÍÕ, ÑËÁ\n"
-"ÚÁ×ÁÎÔÁÖÉÔØÓÑ Ð¦ÓÌÑ ÔÏÇÏ, ÑË ÚÁ˦ÎÞÉÔØÓÑ ÚÁÔÒÉÍËÁ Open Firmware."
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgid "Harddrake2 version %s"
+msgstr "÷ÉÚÎÁÞÅÎÎÑ ÔÉÐÕ ÄÉÓËÕ"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Copying %s"
msgstr ""
-"íÏÖÅÔÅ ÄÏÄÁÔÉ ÄÏÄÁÔËÏצ ÐÕÎËÔÉ ÄÌÑ yaboot, ÁÂÏ ÄÌÑ ÏÐÅÒÁæÊÎÉÈ ÓÉÓÔÅÍ,\n"
-"¦ÎÛÉÈ ÑÄÅÒ ÞÉ ÄÌÑ Á×ÁÒ¦ÊÎÏÇÏ ÏÂÒÁÚÕ ÚÁ×ÁÎÔÁÖÅÎÎÑ.\n"
-"\n"
-"äÌÑ ¦ÎÛÉÈ ïó - ÐÕÎËÔ ÓËÌÁÄÁ¤ÔØÓÑ Ô¦ÌØËÉ Ú ÅÔÉËÅÔËÉ ÔÁ ЦÄÒÏÚĦÌÕ ÄÌÑ\n"
-"ËÏÒÅÎÅ×ϧ ÆÁÊÌÏ×ϧ ÓÉÓÔÅÍÉ.\n"
-"\n"
-"äÌÑ ì¦ÎÁËÓÁ ¤ ˦ÌØËÁ ÍÏÖÌÉ×ÉÈ ÐÁÒÁÍÅÔÒ¦×: \n"
-"\n"
-" * åÔÉËÅÔËÁ: ÃÅ ÐÒÏÓÔÏ ÎÁÚ×Á, ÑËÕ ×É ÍÁ¤ÔÅ ÎÁÄÒÕËÕ×ÁÔÉ ÐÒÉ ÚÁÐÒÏÛÅÎΦ\n"
-"yaboot, ÝÏ ×ÉÂÒÁÔÉ ÃÀ ÏÐæÀ ÚÁ×ÁÎÔÁÖÅÎÎÑ.\n"
-"\n"
-" * ïÂÒÁÚ: ÃÅ - ÎÁÚ×Á ÑÄÒÁ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ. õ ¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦× - ÃÅ\n"
-"vmlinux ÁÂÏ ×ÁÒ¦ÁÎÔÉ ÎÁÚ×É Ú Ò¦ÚÎÉÍÉ ÒÏÚÛÉÒÅÎÎÑÍÉ.\n"
-"\n"
-" * ëÏÒÅÎÅ×Á ÆÁÊÌÏ×Á ÓÉÓÔÅÍÁ: ÐÒÉÓÔÒ¦Ê ÄÌÑ ËÏÒÅÎÅ×ϧ ÆÁÊÌÏ×ϧ ÓÉÓÔÅÍÉ,\n"
-"ÁÂÏ '/' ×ÁÛϧ ÓÉÓÔÅÍÉ ì¦ÎÁËÓ.\n"
-"\n"
-"\n"
-" * äÏÄÁÔÉ: ÎÁ ÁÐÁÒÁÔÎÏÍÕ ÚÁÂÅÚÐÅÞÅÎΦ Apple ÄÏÓÉÔØ ÞÁÓÔÏ\n"
-"×ÉËÏÒÉÓÔÏ×ÕÀÔØÓÑ ÄÏÄÁÔËÏצ ÐÁÒÁÍÅÔÒÉ ÄÌÑ ¦Î¦Ã¦Á̦ÚÁæ§ צÄÅÏ-ÐÌÁÔÉ ÁÂÏ\n"
-"ÄÌÑ ÔÏÇÏ, ÝÏ ¦Î¦Ã¦Á̦ÚÕ×ÁÔÉ ËÌÁצÁÔÕÒÎÕ ÅÍÕÌÑæÀ ËÌÁ×¦Û ÍÉÛËÉ, ÞÅÒÅÚ\n"
-"ÔÅ, ÝÏ ÎÁ ÓÔÁÎÄÁÒÔÎ¦Ê ÍÉÛæ Apple ÎÅÍÁ¤ 2-§ ¦ 3-§ ËÌÁצۦ. äÁ̦ ÐÏÄÁΦ\n"
-"ÄÅÑ˦ ÐÒÉËÌÁÄÉ: \n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-"\n"
-" * Initrd: ÃÅÊ ÐÁÒÁÍÅÔÒ ÍÏÖÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ ÄÌÑ ÔÏÇÏ, ÝÏÂ\n"
-"ÚÁ×ÁÎÔÁÖÕ×ÁÔÉ ÍÏÄÕ̦ ÄÏ ÔÏÇÏ, ÑË ÐÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÅÎÎÑ ÄÏÓÔÕÐÎÉÊ, ÁÂÏ\n"
-"ÝÏ ÐÒÏÞÉÔÁÔÉ ×¦ÒÔÕÁÌØÎÉÊ ÄÉÓË ÄÌÑ Á×ÁÒ¦ÊÎÏÇÏ ÚÁ×ÁÎÔÁÖÅÎÎÑ.\n"
-"\n"
-" * òÏÚÍ¦Ò initrd: ÓÔÁÎÄÁÒÔÎÉÊ ×¦ÒÔÕÁÌØÎÉÊ ÄÉÓË ÍÁ¤ ÒÏÚÍ¦Ò 4096 ÂÁÊÔ,\n"
-"ÑËÝÏ ×ÁÍ ÐÏÔÒ¦ÂÅÎ ÄÉÓË Â¦ÌØÛÏÇÏ ÒÏÚͦÒÕ, ÍÏÖÅÔÅ ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ ÃÉÍ\n"
-"ÐÁÒÁÍÅÔÒÏÍ.\n"
-"\n"
-" * úÁÐÉÓ/ÞÉÔÁÎÎÑ: Ú×ÉÞÎÏ ËÏÒÅÎÅ×Á ÆÁÊÌÏ×Á ÓÉÓÔÅÍÁ ÍÏÎÔÕ¤ÔØÓÑ × ÒÅÖÉͦ\n"
-"Ô¦ÌØËÉ ÄÌÑ ÞÉÔÁÎÎÑ, ÄÌÑ ÔÏÇÏ, ÝÏ ÍÁÔÉ ÍÏÖÌÉצÓÔØ ÐÒÏ×ÅÓÔÉ ÐÅÒÅצÒËÕ\n"
-"ÆÁÊÌÏ×ϧ ÓÉÓÔÅÍÉ ÐÅÒÛ, Î¦Ö ÓÉÓÔÅÍÁ ÚÁ×ÁÎÔÁÖÕ¤ÔØÓÑ × ÒÏÂÏÞÉÊ ÒÅÖÉÍ. ãÅ\n"
-"ÍÏÖÎÁ צÄͦÎÉÔÉ ÔÕÔ.\n"
-"\n"
-" * âÅÚ÷¦ÄÅÏ: Õ ×ÉÐÁÄËÕ, ËÏÌÉ ×¦ÄÅÏ ÐÌÁÔÁ Apple ×ÉÑ×ÉÔØÓÑ ÏÓÏÂÌÉ×Ï\n"
-"ÐÒÏÂÌÅÍÁÔÉÞÎÏÀ, ×É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÃÅÊ ÐÁÒÁÍÅÔÒ ÄÌÑ ÔÏÇÏ, ÝÏÂ\n"
-"ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ ÓÔÁÎÄÁÒÔÎÉÍ framebuffer'ÏÍ.\n"
-"\n"
-" * óÔÁÎÄÁÒÎÁ: ÓÉÓÔÅÍÁ ×ÉÂÒÁÎÁ × ÃØÏÍÕ ÐÕÎËÔ¦ ÚÁ×ÁÎÔÁÖÉÔØÓÑ ÚÒÁÚÕ\n"
-"ЦÓÌÑ ÔÏÇÏ, ÑË ×É ÎÁÔÉÓÎÅÔÅ ENTER ÎÁ ÚÁÐÒÏÛÅÎΦ yaboot. ãÅÊ ÐÕÎËÔ ÂÕÄÅ\n"
-"ÔÁËÏÖ ÐÏËÁÚÁÎÉÊ ÓÉÍ×ÏÌÏÍ *, ÑËÝÏ ×É ÎÁÔÉÓÎÅÔÅ TAB, ÝÏ ÐÏÄÉ×ÉÔÉÓÑ\n"
-"ÓÐÉÓÏË ÓÉÓÔÅÍ. "
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"DrakX ÓÐÒÏÂÕ¤ צÄÛÕËÁÔÉ ×Ó¦ ÖÏÒÓÔ˦ ÄÉÓËÉ Õ ÓÉÓÔÅͦ ¦ ÏÄÎÏÞÁÓÎÏ\n"
-"צÄÛÕËÁÔÉ ÐÌÁÔÉ PCI SCSI. ñËÝÏ DrakX ÚÎÁÊÄÅ ÐÌÁÔÕ SCSI ¦ ÚÎÁ¤ ÑËÉÊ\n"
-"ÄÒÁÊ×ÅÒ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ Ú Ã¦¤À ÐÌÁÔÏÀ, צΠÁ×ÔÏÍÁÔÉÞÎÏ ×ÓÔÁÎÏ×ÉÔØ ÃÅÊ\n"
-"ÄÒÁÊ×ÅÒ (æ ÄÒÁÊ×ÅÒÉ).\n"
-"\n"
-"÷ ÄÅÑËÉÈ ×ÉÐÁÄËÁÈ ÎÅ ×ÓÑ ÁÐÁÒÁÔÕÒÁ ÒÏÚЦÚÎÁ¤ÔØÓÑ ÐÏ×ΦÓÔÀ. ñËÝÏ ×É ÎÅ\n"
-"ÍÁ¤ÔÅ ÐÌÁÔÉ SCSI, ÍÁ¤ÔÅ ISA SCSI ÐÌÁÔÕ, ÁÂÏ PCI SCSI ÐÌÁÔÕ, ÑËÁ ÎÅ\n"
-"ÒÏÚЦÚÎÁ¤ÔØÓÑ DrakX, ÷ÁÍ ÂÕÄÅ ÚÁÄÁÎÅ ÚÁÐÉÔÁÎÎÑ, ÐÒÏ ÔÅ ÞÉ ¤ Õ ÷ÁÛ¦Ê\n"
-"ÓÉÓÔÅͦ SCSI ÐÌÁÔÁ. ñËÝÏ ÔÁËϧ ÐÌÁÔÉ Õ ÷ÁÓ ÎÅÍÁ¤, ÐÒÏÓÔÏ ËÌÁÃΦÔØ ÎÁ\n"
-"\"î¦\". ñËÝÏ ×É ËÌÁÃÎÅÔÅ ÎÁ \"ôÁË\", ÷ÁÍ ÂÕÄÅ ÎÁÄÁÎÏ ÓÐÉÓÏË ÄÒÁÊ×ÅÒ¦×, Ú\n"
-"ÑËÏÇÏ ÷ÁÍ ÔÒÅÂÁ ×ÉÂÒÁÔÉ ÐÏÔÒ¦ÂÎÉÊ.\n"
-"\n"
-"ñËÝÏ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ ×ÒÕÞÎÕ ×ÉÂÉÒÁÔÉ ÄÒÁÊ×ÅÒ, DrakX ÚÁÐÉÔÁ¤ Õ ÷ÁÓ,\n"
-"ÞÉ ×É ÈÏÞÅÔÅ ×ËÁÚÁÔÉ Ñ˦ÓØ ÐÅ×Φ ÏÐæ§ ÄÌÑ ÄÒÁÊ×ÅÒÁ. ëÒÁÝÅ, ÑËÝÏ ÷É\n"
-"ÄÏÚ×ÏÌÉÔÅ DrakX ×ÉÐÒÏÂÕ×ÁÔÉ ÐÌÁÔÕ, ÝÏ ×ÉÚÎÁÞÉÔÉ ÐÏÔÒ¦ÂΦ\n"
-"ÏÐæ§. ú×ÉÞÎÏ ÃÅ ÐÒÁÃÀ¤ ÎÏÒÍÁÌØÎÏ.\n"
-"\n"
-"ñËÝÏ ÃÅ ÎÅ ÓÐÒÁÃÀ¤, ÷ÁÍ ÓÌ¦Ä ×ËÁÚÁÔÉ ÐÏÔÒ¦ÂΦ ÏÐæ§ ÄÌÑ\n"
-"ÄÒÁÊ×ÅÒÁ. ðÅÒÅÇÌÑÎØÔÅ \"ðÏÓ¦ÂÎÉË ÐÏ ÕÓÔÁÎÏ×æ\" (òÏÚÄ¦Ì 3, ЦÄÒÏÚĦÌ\n"
-"\"úÎÁÈÏÄÖÅÎÎÑ ¦ÎÆÏÒÍÁæ§ ÐÒÏ ÷ÁÛÕ ÁÐÁÒÁÔÕÒÕ\"), Ú ÄÏËÕÍÅÎÔÁæ§ ÐÏ\n"
-"ÁÐÁÒÁÔÎÏÍÕ ÚÁÂÅÚÐÅÞÅÎÎÀ ÁÂÏ Ú ÄÏÍÁÛÎØϧ ÓÔÏÒ¦ÎËÉ ×ÉÒÏÂÎÉËÁ ÁÐÁÒÁÔÕÒÉ\n"
-"ÁÂÏ Ä¦ÚÎÁÊÔÅÓÑ ÐÏÔÒ¦ÂΦ ÐÁÒÁÍÅÔÒÉ Ú Windows (ÑËÝÏ ×É ÍÁ¤ÔÅ ÃÀ ÓÉÓÔÅÍÕ\n"
-"ÎÁ Ó×ϤÍÕ ËÏÍÐ'ÀÔÅÒ¦)."
+msgid "Choose color"
+msgstr "÷ÉÂÅÒ¦ÔØ ÔÉÐ ÍÏΦÔÏÒÕ"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
-"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
-msgstr ""
+msgid "Dominican Republic"
+msgstr "äÏͦΦËÁÎÓØËÁ ÒÅÓÐÕÂ̦ËÁ"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
+msgid "Swaziland"
+msgstr "ó×ÁÚ¦ÌÅÎÄ"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Set-UID"
msgstr ""
-"LILO (the LInux LOader - ÚÁ×ÁÎÔÁÖÕ×ÁÞ ì¦ÎÁËÓÁ) ÔÁ Grub -- ÃÅ\n"
-"ÚÁ×ÁÎÔÁÖÕ×ÁÞ¦ ÓÉÓÔÅÍÉ: ×ÏÎÉ ÍÏÖÕÔØ ÚÁ×ÁÎÔÁÖÉÔÉ ÁÂÏ GNU/ì¦ÎÁËÓ ÁÂÏ\n"
-"ÂÕÄØ-ÑËÕ ¦ÎÛÕ ÏÐÅÒÁæÊÎÕ ÓÉÓÔÅÍÕ ÎÁ ÷ÁÛÏÍÕ ËÏÍÐ'ÀÔÅÒ¦. úÁ ÎÏÒÍÁÌØÎÉÈ\n"
-"ÕÍÏ× Ã¦ ÏÐÅÒÁæÊΦ ÓÉÓÔÅÍÉ ×¦ÒÎÏ ×ÉÚÎÁÞÁÀÔØÓÑ ÔÁ ×ÓÔÁÎÏ×ÌÀÀÔØÓÑ. ñËÝÏ\n"
-"ÃÅ ÎÅ ÔÁË, ×É ÍÏÖÅÔÅ ÄÏÄÁÔÉ ÐÏÔÒ¦ÂÎÉÊ ÐÕÎËÔ ÓÁÍÏÓÔ¦ÊÎÏ. õ×ÁÖÎÏ\n"
-"×ÉÂÅÒ¦ÔØ ÐÏÔÒ¦ÂΦ ÐÁÒÁÍÅÔÒÉ.\n"
-"\n"
-"\n"
-"÷É, ÍÏÖÌÉ×Ï, ÔÁËÏÖ ÚÁÈÏÞÅÔÅ ÚÁËÒÉÔÉ ÄÏÓÔÕÐ ÄÏ ÃÉÈ ÏÐÅÒÁæÊÎÉÈ ÓÉÓÔÅÍ\n"
-"¦ÎÛÉÍ, × ÃØÏÍÕ ×ÉÐÁÄËÕ ×É ÍÏÖÅÔÅ ÓÔÅÒÔÉ ×¦ÄÐÏצÄΦ ÐÕÎËÔÉ × ÆÁÊ̦\n"
-"ËÏÎƦ­ÕÒÁæ§. áÌÅ × ÃØÏÍÕ ×ÉÐÁÄËÕ ÷ÁÍ ÐÏÔÒ¦ÂÎÁ ÂÕÄÅ ÓÐÅæÁÌØÎÁ\n"
-"ÄÉÓËÅÔÁ, ÝÏ ÚÁ×ÁÎÔÁÖÉÔÉ Ã¦ ÓÉÓÔÅÍÉ!"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
-"LILO ¦ GRUB - ÃÅ ÚÁ×ÁÎÔÁÖÕ×ÁÞ¦ ÓÉÓÔÅÍÉ ÄÌÑ GNU/Linux. ãÅÊ ËÒÏË Ú×ÉÞÎÏ\n"
-"ÐÏ×ΦÓÔÀ Á×ÔÏÍÁÔÉÚÏ×ÁÎÉÊ. æÁËÔÉÞÎÏ, drakX ÐÒÏ×ÅÄÅ ÁÎÁ̦Ú\n"
-"ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÏÇÏ ÓÅËÔÏÒÁ ÄÉÓËÕ ¦ ÂÕÄŠĦÑÔÉ ×¦ÄÐÏצÄÎÏ ÄÏ ÔÏÇÏ, ÝÏ ×\n"
-"ÎØÏÍÕ ×ÉÑ×ÉÔØÓÑ:\n"
-"\n"
-" * ÑËÝÏ ÔÕÔ ÐÒÉÓÕÔÎ¦Ê ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÉÊ ÓÅËÔÏÒ Windows, צΠÚÁͦÎÉÔØ\n"
-"ÊÏÇÏ ÎÁ ÓÅËÔÏÒ GRUB/LILO ÔÁËÉÍ ÞÉÎÏÍ, ÝÏ ÷É ÍÏÇÌÉ ÓÔÁÒÔÕ×ÁÔÉ ÏÂϤ - ¦\n"
-"GNU/Linux, ¦ Windows;\n"
-"\n"
-" * ÑËÝÏ ÚÎÁÊÄÅÎÉÊ ÂÌÏË ×¦Ä GRUB ÞÉ LILO, צΠÂÕÄÅ ÚÁͦÎÅÎÉÊ ÎÁ ÎÏ×ÉÊ. \n"
-"\n"
-"ñËÝÏ ÓÉÔÕÁÃ¦Ñ ÎÅ ÔÁËÁ Þ¦ÔËÁ, drakX ÚÁÐÒÏÐÏÎÕ¤ ÷ÁÍ ×ÉÂ¦Ò Ú Ë¦ÌØËÏÍÁ\n"
-"ÍÏÖÌÉ×ÉÍÉ ×ÉÈÏÄÁÍÉ. \n"
-"\n"
-" * ñËÉÊ ÚÁ×ÁÎÔÁÖÕ×ÁÞ ×ÖÉ×ÁÔÉ: ÷É ÍÁ¤ÔÅ ÔÒÉ ×ÁÒ¦ÁÎÔÉ ÎÁ ×ɦÒ:\n"
-" \n"
-" * LILO Ú ÇÒÁƦÞÎÉÍ ÍÅÎÀ: ÑËÝÏ ÷É ÎÁÄÁ¤ÔÅ ÐÅÒÅ×ÁÇÕ LILO Ú ÊÏÇÏ\n"
-" ÇÒÁƦÞÎÏÀ ÏÂÏÌÏÎËÏÀ.\n"
-"\n"
-" * Grub: ÑËÝÏ ÷ÁÍ ÐÏÄÏÂÁ¤ÔØÓÑ Grub (Ú ÔÅËÓÔÏ×ÉÍ ÍÅÎÀ).\n"
-"\n"
-" * LILO Ú ÔÅËÓÔÏ×ÉÍ ÍÅÎÀ: ÑËÝÏ ÷ÁÍ ÐÏÄÏÂÁ¤ÔØÓÑ LILO Ú ÔÅËÓÔÏ×ÉÍ\n"
-" ÍÅÎÀ.\n"
-"\n"
-" * ðÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÅÎÎÑ: Õ Â¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦× ÷ÁÍ ÎÅ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ\n"
-"ÚͦÎÀ×ÁÔÉ ÎÅÑ×ÎÏ ×ÓÔÁÎÏ×ÌÅÎÉÊ ÄÉÓË (/dev/hda), ÁÌÅ ÑËÝÏ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ,\n"
-"÷É ÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÚÁ×ÁÎÔÁÖÕ×ÁÞ ÎÁ ÄÒÕÇÏÍÕ ÖÏÒÓÔËÏÍÕ ÄÉÓËÕ\n"
-"(/dev/hdb) ÞÉ ÎÁצÔØ ÎÁ ÄÉÓËÅÔ¦ (/de/fd0). \n"
-"\n"
-" * úÁÔÒÉÍËÁ ÐÅÒÅÄ ÚÁ×ÁÎÔÁÖÅÎÎÑÍ ÏÓÎÏ×ÎÏÇÏ ÑÄÒÁ: ÃÅ ÚÁÔÒÉÍËÁ ÐÒÉ\n"
-"ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ, ÑËÁ ÎÁÄÁ¤ÔØÓÑ ËÏÒÉÓÔÕ×ÁÞÅצ, ÝÏ צΠÍÁ×\n"
-"ÍÏÖÌÉצÓÔØ ×ÉÂÒÁÔÉ ¦ÎÛÉÊ ÐÕÎËÔ × ÍÅÎÀ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ.\n"
-"\n"
-"!! âÕÄØÔÅ Õ×ÁÖÎÉÍÉ: ÑËÝÏ ÷É ÎÁÔÉÓÎÅÔÅ ËÎÏÐËÕ \"÷¦ÄͦÎÉÔÉ\" (¦ ÔÉÍ ÓÁÍÉÍ\n"
-"×ËÁÖÅÔÅ ÐÒÏÇÒÁͦ ÎÅ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ ÓÉÓÔÅÍÎÏÇÏ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ),\n"
-"ÐÅÒÅÓצÄÞ¦ÔØÓÑ, ÝÏ ÷É ÍÁ¤ÔÅ Õ ÚÁÐÁÓ¦ ÍÅÔÏÄ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ\n"
-"íÁÎÄÒÅÊË ì¦ÎÁËÓ! âÕÄØÔÅ ÔÁËÏÖ ÐÅ×ÎÉÍÉ, ÝÏ ÷É ÄÏÂÒÅ ÚÎÁ¤ÔÅ, ÝÏ ÷É\n"
-"ÒÏÂÉÔÉ, ËÏÌÉ ÷É ÚͦÎÀ¤ÔÅ ÂÕÄØ-Ñ˦ ÐÁÒÁÍÅÔÒÉ ÔÕÔ!!\n"
-"\n"
-"îÁÔÉÓÎÕ×ÛÉ ËÎÏÐËÕ \"äÏÄÁÔËÏ×Ï\" × ÃØÏÍÕ ×¦ËΦ, ÷É ÏÔÒÉÍÁ¤ÔÅ ÄÏÓÔÕÐ ÄÏ\n"
-"ÂÁÇÁÔØÏÈ ÄÏÄÁÔËÏ×ÉÈ ËÏÎƦ­ÕÒÁæÊÎÉÈ ÐÁÒÁÍÅÔÒ¦× ÐÒÉÚÎÁÞÅÎÉÈ ÄÌÑ\n"
-"ÄÏÓצÄÞÅÎÉÈ ËÏÒÉÓÔÕ×ÁÞ¦×.\n"
-"\n"
-"íÁÎÄÒÅÊË ì¦ÎÁËÓ ×ÓÔÁÎÏ×ÌÀ¤ Ó×¦Ê ×ÌÁÓÎÉÊ ÓÉÓÔÅÍÎÉÊ ÚÁ×ÁÎÔÁÖÕ×ÁÞ, ÑËÉÊ\n"
-"ÄÏÚ×ÏÌÉÔØ ÷ÁÍ ÚÁ×ÁÎÔÁÖÕ×ÁÔÉ ÁÂÏ GNU/Linux, ÁÂÏ ÂÕÄØ-ÑËÕ ¦ÎÛÕ\n"
-"ÏÐÅÒÁæÊÎÕ ÓÉÓÔÅÍÕ, ×ÓÔÁÎÏ×ÌÅÎÕ ÎÁ Ã¦Ê ÍÁÛÉΦ.\n"
-"\n"
-"ñËÝÏ ÎÁ ÍÁÛÉΦ ×ÓÔÁÎÏ×ÌÅÎÁ ¦ÎÛÁ ÏÐÅÒÁæÊÎÁ ÓÉÓÔÅÍÁ, ×ÏÎÁ Á×ÔÏÍÁÔÉÞÎÏ\n"
-"ÂÕÄÅ ÄÏÄÁÎÁ ÄÏ ÓÐÉÓËÕ ÓÉÓÔÅÍ × ÍÅÎÀ. ôÕÔ ÍÏÖÎÁ ÚͦÎÉÔÉ ¦ÓÎÕÀÞ¦\n"
-"ÐÁÒÁÍÅÔÒÉ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ËÏÖÎϧ ÓÉÓÔÅÍÉ. ðÏÄצÊÎÅ ËÌÁÃÁÎÎÑ ÎÁ ÐÕÎËÔ¦\n"
-"ÍÅÎÀ ÄÏÚ×ÏÌÉÔØ ÷ÁÍ ÚͦÎÉÔÉ ¦ÓÎÕÀÞ¦ ÐÁÒÁÍÅÔÒÉ, ÁÂÏ ÓÔÅÒÔÉ ÄÁÎÉÊ ÐÕÎËÔ\n"
-"ÍÅÎÀ. \"äÏÄÁÔÉ\" ÓÔ×ÏÒÀÖ ÎÏ×ÉÊ ÐÕÎËÔ. ¶ \"úÁ˦ÎÞÅÎÏ\" ÐÅÒÅÈÏÄÉÔØ ÎÁ\n"
-"ÎÁÓÔÕÐÎÉÊ ËÒÏË ÕÓÔÁÎÏ×ËÉ."
+msgid "Please check if you are using CDRW media"
+msgstr "ëÌÁÃΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁ ЦÄÒÏÚĦ̦"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"îÁÓÔÕÐÎÅ - ÎÁʦÌØÛ ×ÁÛÌÉ×ÉÊ ËÒÏË Ú ÔÏÞËÉ ÚÏÒÕ ÂÅÚÐÅËÉ ÷ÁÛϧ ÓÉÓÔÅÍÉ\n"
-"GNU/Linux: ×ÉÂ¦Ò ÐÁÒÏÌÑ ÄÌÑ ËÏÒÉÓÔÕ×ÁÞÁ Root. Root - ÃÅ ÓÉÓÔÅÍÎÉÊ\n"
-"ÁÄͦΦÓÔÒÁÔÏÒ ¦ ¤ÄÉÎÁ ÏÓÏÂÁ, ÑË¦Ê ÄÏÚ×ÏÌÅÎÏ ÒÏÂÉÔÉ ÐÏÎÏ×ÌÅÎÎÑ ÓÉÓÔÅÍÉ,\n"
-"ÄÏÄÁ×ÁÔÉ ËÏÒÉÓÔÕ×ÁÞ¦×, ÚͦÎÀ×ÁÔÉ ÚÁÇÁÌØÎÕ ËÏÎƦ­ÕÒÁæÀ ÓÉÓÔÅÍÉ, ÔÁËÅ\n"
-"¦ÎÛÅ. ëÏÒÏÔÛÅ - Root ÍÏÖÅ ×ÓÅ! ïÓØ ÞÏÍÕ ÷ÁÍ ÓÌ¦Ä ×ÉÂÉÒÁÔÉ ÐÁÒÏÌØ, ÑËÉÊ\n"
-"×ÁÖËÏ ×ÇÁÄÁÔÉ, drakX ÓËÁÖÅ ÷ÁÍ, ÑËÝÏ ÐÁÒÏÌØ ÚÁÎÁÄÔÏ ÌÅÇËÉÊ. ñË\n"
-"ÐÏËÁÚÁÎÏ, ÷ÁÍ ÎÅÏÂÏ×'ÑÚËÏ×Ï ××ÏÄÉÔÉ ÐÁÒÏÌØ, ÁÌÅ ÍÉ ÎÁÓÔ¦ÊÌÉ×Ï\n"
-"ÒÅËÏÍÅÎÄÕ¤ÍÏ ÷ÁÍ ×ÓÅ-ÔÁËÉ ×ÉÂÒÁÔÉ ÐÁÒÏÌØ, ÈÏÞÁ Â Ú ÏÄΦ¤§-¤ÖÉÎϧ\n"
-"ÐÒÉÞÉÎÉ: ÎÅ ÄÕÍÁÊÔÅ, ÝÏ ÞÅÒÅÚ ÔÅ, ÝÏ ÷É ÚÁ×ÁÎÔÁÖÉÌÉ GNU/Linux, ÷ÁÛÁ\n"
-"ÓÉÓÔÅÍÁ צÌØÎÁ ×¦Ä ÐÏÍÉÌÏË. ãÅ ÎÅ ÔÁË, ÏÓ˦ÌØËÉ Root ÍÏÖÅ ÐÅÒÅ×ÁÖÉÔÉ\n"
-"×Ó¦ ÚÁÂÏÒÏÎÉ ¦ ÎÅÎÁÒÏËÏÍ ÓÔÅÒÔÉ ×Ó¦ ÄÁΦ ÎÁ ×ÓÉÈ Ð¦ÄÒÏÚĦÌÁÈ\n"
-"Ú×ÅÒÔÁÀÞÉÓØ ÂÅÚÐÏÓÅÒÅÄÎØÏ ÄÏ Ð¦ÄÒÏÚĦ̦×! ôÏÍÕ, ÄÏÓÔÕÐ ÄÏ ÒÁÈÕÎËÕ root\n"
-"ÍÁ¤ ÂÕÔÉ ÚÁÈÉÝÅÎÉÍ.\n"
-"\n"
-"ðÁÒÏÌØ ÍÁ¤ ÂÕÔÉ ÓÕͦÛÛÀ ÁÌÆÁצÔÎÏ-ÃÉÆÒÏ×ÉÈ ÓÉÍ×ÏÌ¦× ¦ ÂÕÔÉ ÚÁ×ÄÏ×ÖËÉ\n"
-"ÈÏÞÁ- 8 ÓÉÍ×Ï̦×. î¦ËÏÌÉ ÎÅ ÚÁÐÉÓÕÊÔÅ ÐÁÒÏÌØ!\n"
-"\n"
-"îÅ ×ÉÂÉÒÁÊÔÅ ÚÁÎÁÄÔÏ ÄÏ×ÇÉÊ ÞÉ ÓËÌÁÄÎÉÊ ÐÁÒÏÌØ. ÷ÁÍ ÊÏÇÏ\n"
-"ÚÁÐÁÍ'ÑÔÏ×Õ×ÁÔÉ.\n"
-"\n"
-"ëÏÌÉ ÷É ÂÕÄÅÔÅ ÄÒÕËÕ×ÁÔÉ ÐÁÒÏÌØ ÎÁ ÅËÒÁΦ, ÊÏÇÏ ÎÅ ÂÕÄÅ ×ÉÄÎÏ. ïÓØ\n"
-"ÞÏÍÕ ÐÒÉ ×ÉÂÏÒ¦ ÐÁÒÏÌÑ, ÷ÁÍ ÚÁÐÒÏÐÏÎÕ¤ÔØÓÑ ××ÅÓÔÉ ÊÏÇÏ Äצަ, ÏÓ˦ÌØËÉ\n"
-"ÐÏÍÉÌËÁ ÐÒÉ ÐÅÒÛÏÍÕ ××ÅÄÅÎΦ ÐÁÒÏÌÑ, ÍÏÖÅ ÂÕÔÉ ÐÒÏÂÌÅÍÏÀ: ÐÒÉ\n"
-"ÒŤÓÔÒÁæ§ × ÓÉÓÔÅͦ ÷ÁÍ ÔÒÅÂÁ ÂÕÄÅ ËÏÒÉÓÔÕ×ÁÔÉÓØ \"ÎÅצÒÎÉÍ\" ÐÁÒÏÌÅÍ.\n"
-"\n"
-"÷ ÅËÓÐÅÒÔÎÏÍÕ ÒÅÖÉͦ, Õ ÷ÁÓ ÂÕÄÅ ÍÏÖÌÉצÓÔØ ×ËÁÚÁÔÉ, ÞÉ ÷É ÂÕÄÅÔÅ\n"
-"ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÑËÉÍ-ÎÅÂÕÄØ ÓÅÒ×ÅÒÏÍ Á×ÔÅÎÔÉËÁæ§: NIS ÞÉ LDAP.\n"
-"\n"
-"ñËÝÏ ÷É ËÏÒÉÓÔÕ¤ÔÅÓØ NIS'ÏÍ (ÞÉ LDAP) ×ÉÂÅÒ¦ÔØ ÏÐæÀ \"ëÏÒÉÓÔÕ×ÁÔÉÓØ\n"
-"NIS'ÏÍ\" (\"LDAP\"). ñËÝÏ ÷É ÎÅ ÚÎÁ¤ÔÅ ÃØÏÇÏ, ÚÁÐÉÔÁÊÔÅ × Ó×ÏÇÏ\n"
-"ÓÉÓÔÅÍÎÏÇÏ ÁÄͦΦÓÔÒÁÔÏÒÁ.\n"
-"\n"
-"ñËÝÏ ËÏÍÐ'ÀÔÅÒ ÎŠЦÄËÌÀÞÅÎÉÊ ÄÏ ÍÅÒÅÖ¦, ×ÉÂÅÒ¦ÔØ ìÏËÁÌØΦ ÆÁÊÌÉ ÄÌÉ\n"
-"Á×ÔÅÎÔÉËÁæ§.."
+"÷ÉÂÅÒ¦ÔØ ÖÏÒÓÔËÉÊ ÄÉÓË, ÑËÉÊ ×É ÈÏÞÅÔÅ ÐÅÒÅÆÏÒÍÁÔÕ×ÁÔÉ ÝÏ ×ÓÔÁÎÏ×ÉÔÉ\n"
+"ÎÏ×ÉÊ Ð¦ÄÒÏÚÄ¦Ì ÄÌÑ íÁÎÄÒÅÊË ì¦ÎÁËÓÁ. âÕÄØÔÅ Õ×ÁÖΦ, ÏÓ˦ÌØËÉ ×Ó¦ ÄÁΦ\n"
+"ÂÕÄÕÔØ ÚÎÉÝÅΦ, ¦ צÄÎÏ×ÉÔÉ §È ÂÕÄÅ ÎÅÍÏÖÌÉ×Ï!"
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
+msgid " on parallel port \\#%s"
msgstr ""
-"âÕÄØ-ÌÁÓËÁ, ×ÉÂÅÒ¦ÔØ ×¦ÒÎÉÊ ÐÏÒÔ. îÁÐÒÉËÌÁÄ, ÐÏÒÔ Ð¦Ä ÎÁÚ×ÏÀ COM1 Õ MS\n"
-"Windows ÎÏÓÉÔØ ÎÁÚ×Õ ttyS0 Õ GNU/ì¦ÎÁËÓ¦."
-#: ../../help.pm:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is then suggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Dlja vyboru pidsvichenogo punktu korystujtesja klavishamy %c ta %c."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-"âÕÄØ ÌÁÓËÁ, ×ÉÂÅÒ¦ÔØ ÍÏ×Õ ÄÌÑ ÕÓÔÁÎÏ×ËÕ ÓÉÓÔÅÍÉ ÔÁ ËÏÒÉÓÔÕ×ÁÎÎÑ Ð¦ÓÌÑ\n"
-"ÕÓÔÁÎÏ×ËÉ. \n"
-"\n"
-"ðÒÉÓÕÔÎÑ ÔÁËÏÖ ËÎÏÐËÁ \"äÏÄÁÔËÏ×Ï\", ÑËÁ ÄÏÚ×ÏÌѤ ÷ÁÍ ×ÉÂÒÁÔÉ ¦ÎÛ¦ ÍÏ×É,\n"
-"Ñ˦ ÍÏÖÕÔØ ÂÕÔÉ ÔÁËÏÖ ÕÓÔÁÎÏ×ÌÅÎÉÍÉ × ÓÉÓÔÅͦ. ÷É ÚÍÏÖÅÔÅ\n"
-"ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÃÉÍÉ ÍÏ×ÁÍÉ Ð¦ÓÌÑ ÕÓÔÁÎÏ×ËÉ. ñËÝÏ, ÎÁÐÒÉËÌÁÄ, ÎÁ ÷ÁÛ¦Ê\n"
-"ÍÁÛÉΦ (Õ ÑËϧ ÁÎÇ̦ÊÓØËÁ ×ÓÔÁÎÏ×ÌÅÎÁ ÏÓÎÏ×ÎÏÀ ÍÏ×ÏÀ) ÂÕÄÕÔØ ÐÒÁÃÀ×ÁÔÉ\n"
-"¦ÓÐÁÎæ, ×ÉÂÅÒ¦ÔØ × ÄÏÄÁÔËÏ×ÉÈ ÍÏ×ÁÈ ¶ÓÐÁÎÓØËÁ|¶ÓÐÁΦÑ.\n"
-"\n"
-"ð¦ÓÌÑ ×ÉÂÏÒÕ ÍÏ×É ¦ ЦÄÔ×ÅÒÄÖÅÎÎÑ, ÷É Á×ÔÏÍÁÔÉÞÎÏ ÐÅÒÅÈÏÄÉÔÅ ÄÏ\n"
-"ÎÁÓÔÕÐÎÏÇÏ ËÒÏËÕ."
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 2 Button Mouse"
+msgstr "ú×ÉÞÁÊÎÁ 2È ËÎÏÐÏÞÎÁ ÍÉÛËÁ"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-"ú×ÉÞÎÏ drakX ×ÉÂÉÒÁ¤ צÒÎÕ ËÌÁצÁÔÕÒÕ (× ÚÁÌÅÖÎÏÓÔ¦ ×¦Ä ÍÏ×É, ÑËÏÀ ÷É\n"
-"ËÏÒÉÓÔÕ¤ÔÅÓØ) ¦ ÷É ÎÅ ÐÏÂÁÞÉÔÅ ÃØÏÇÏ ËÒÏËÕ. ïÄÎÁË, ÍÏÖÌÉ×Ï, ÷É ÎÅ\n"
-"ÍÁ¤ÔÅ ËÌÁצÁÔÕÒÉ, ÝÏ ÔÏÞÎÏ ×¦ÄÐÏצÄÁ¤ ÷ÁÛ¦Ê ÍÏצ: ÎÁÐÒÉËÌÁÄ, ÑËÝÏ ÷É\n"
-"ÁÇÌÏÍÏ×ÎÉÊ Û×ÅÄ, ÷É ×ÓÅ-ÏÄÎÏ ÍÏÖÅÔÅ ÚÁÂÁÖÁÔÉ ËÏÒÉÓÔÕ×ÁÔÉÓØ Û×ÅÄÓØËÏÀ\n"
-"ËÌÁצÁÔÕÒÏÀ. áÂÏ, ÑËÝÏ ÷É ÇÏ×ÏÒÉÔÅ ÁÎÇ̦ÊÓØËÏÀ, ÁÌÅ ÖÉ×ÅÔÅ × ë×ÅÂÅËÕ,\n"
-"÷É ÐÏÔÒÁÐÌѤÔÅ × ÁÎÁÌÏ­¦ÞÎÕ ÓÉÔÕÁæÀ. ÷ ÏÂÏÈ ×ÉÐÁÄËÁÈ, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ\n"
-"ÐÏ×ÅÒÎÕÔÉÓØ ÄÏ ÃØÏÇÏ ÅÔÁÐÕ ÕÓÔÁÎÏ×ËÉ ¦ ×ÉÂÒÁÔÉ ×¦ÄÐÏצÄÎÕ ËÌÁצÁÔÕÒÕ Ú\n"
-"ÎÁÄÁÎÏÇÏ ÓÐÉÓËÕ. ÷ÓÅ, ÝÏ ÐÏÔÒ¦ÂÎÏ, ÃÅ ×ÉÂÒÁÔÉ ÐÏÔÒ¦ÂÎÕ ËÌÁצÁÔÕÒÕ ¦Ú\n"
-"ÓÐÉÓËÕ, ÝÏ Ú'Ñ×ÌѤÔØÓÑ ÐÅÒÅÄ ÷ÁÍÉ.\n"
-"\n"
-"îÁÔÉÓΦÔØ ËÎÏÐËÕ äÏÄÁÔËÏ×Ï ¦ ÷É ÐÏÂÁÞÉÔÅ ÐÏ×ÎÉÊ ÓÐÉÓÏË ÒÏÚËÌÁÄÏË\n"
-"ËÌÁצÁÔÕÒ."
+#: ../../lvm.pm:1
+#, c-format
+msgid "Remove the logical volumes first\n"
+msgstr "óÐÏÞÁÔËÕ Ú¦ÔÒ¦ÔØ ÌÏǦÞÎÉÊ ÔÏÍ\n"
-#: ../../help.pm:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is then suggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Pidsvichena systema zavantazhyt'sja avtomatichno cherez %d sekund."
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"îÁ ÷ÁÛÏÍÕ ÄÉÓËÕ ÚÎÁÊÄÅÎÏ Â¦ÌØÛÅ ÏÄÎÏÇÏ Ð¦ÄÒÏÚĦÌÁ, ÝÏ ÎÁÌÅÖÁÔØ\n"
-"ÏÐÅÒÁæÊÎ¦Ê ÓÉÓÔÅͦ ÷¦ÎÄÏ×Ó. ÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÏÄÉÎ Ú ÎÉÈ, ÒÏÚͦÒ\n"
-"ÑËÏÇÏ ÂÉ ×É ÈÏÔ¦ÌÉ ÚͦÎÉÔÉ, ÄÌÑ ÔÏÇÏ ÝÏ ×ÓÔÁÎÏ×ÉÔÉ ÏÐÅÒÁæÊÎÕ ÓÉÓÔÅÍÕ\n"
-"íÁÎÄÒÅÊË ì¦ÎÁËÓ.\n"
-"\n"
-"ëÏÖÅΠЦÄÒÏÚÄ¦Ì ÐÏÄÁÎÏ × ÔÁËÏÍÕ ×ÉÇÌÑĦ: \"îÁÚ×Á × ì¦ÎÁËÓ¦\", \"îÁÚ×Á Õ\n"
-"÷¦ÎÄÏ×Ó\", \"òÏÚͦÒ\".\n"
-"\n"
-"\"îÁÚ×Á × ì¦ÎÁËÓ¦\" ÚÁËÏÄÏ×ÁÎÁ ÔÁËÉÍ ÞÉÎÏÍ: \"ÔÉÐ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ\",\n"
-"\"ÎÏÍÅÒ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ\", \"ÎÏÍÅÒ Ð¦ÄÒÏÚĦÌÕ ÎÁ ÄÉÓËÕ\", (îÁÐÒÉËÌÁÄ:\n"
-"\"hda1\").\n"
-"\n"
-"ôÉÐ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ\" - ÃÅ \"hd\", ÑËÝÏ ×É ÍÁ¤ÔÅ ÄÉÓË ÔÉÐÕ IDE, ¦ \"sd\",\n"
-"ÑËÝÏ ×É ÍÁ¤ÔÅ ÖÏÒÓÔËÉÊ ÄÉÓË ÔÉÐÕ SCSI.\n"
-"\n"
-"\"îÏÍÅÒ ÖÏÒÓËÏÇÏ ÄÉÓËÕ\" - ÃÅ ÚÁ×ÖÄÉ Ì¦ÔÅÒÁ ЦÓÌÑ \"hd\" ÞÉ \"sd\". äÌÑ\n"
-"ÄÉÓË¦× ÔÉÐÕ IDE ÃÅ:\n"
-"\n"
-" * \"a\" - ÇÏÌÏ×ÎÉÊ ÄÉÓË (master) ÎÁ ÐÅÒÛÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
-"\n"
-" * \"b\" - ×ÔÏÒÉÎÎÉÊ (slave) ÄÉÓË ÎÁ ÐÅÒÛÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
-"\n"
-" * \"c\" - ÇÏÌÏ×ÎÉÊ ÄÉÓË ÎÁ ÄÒÕÇÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
-"\n"
-" * \"d\" - ×ÔÏÒÉÎÎÉÊ ÄÉÓË ÎÁ ÄÒÕÇÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE.\n"
-"\n"
-"äÌÑ SCSI ÄÉÓË¦× \"a\" ÏÚÎÁÞÁ¤ \"ÇÏÌÏ×ÎÉÊ ÄÉÓË\", \"b\" - ÄÒÕÇÏÒÑÄÎÉÊ ÄÉÓË, "
-"¦\n"
-"Ô.Ä. ...\n"
-"\n"
-"\"îÁÚ×Á Õ ÷¦ÎÄÏ×Ó\" - Ê̦ÔÅÒÁ ÷ÁÛÏÇÏ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ, ÑË ×É §§ ÂÁÞÉÔÅ\n"
-"ÐÒÉ ÒÏÂÏÔ¦ Õ ÷¦ÎÄÏ×Ó (ÐÅÒÛÉÊ ÄÉÓË ÞÉ Ð¦ÄÒÏÚÄ¦Ì ÎÁÚÉ×Á¤ÔØÓÑ \"C:\")."
+msgid "Internet access"
+msgstr "äÏÓÔÕÐ ÄÏ ¦ÎÔÅÒÎÅÔÕ"
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../standalone/draksplash:1
+#, c-format
msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-"úÁÒÁÚ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ×ÉÂÒÁÔÉ, Ñ˦ ЦÄÒÏÚĦÌÉ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÄÌÑ ÷ÁÛϧ\n"
-"ÎÏ×ϧ ÓÉÓÔÅÍÉ ì¦ÎÁËÓ íÁÎÄÒÅÊË. ñËÝÏ Ã¦ ЦÄÒÏÚĦÌÉ ×ÖÅ ÂÕÌÉ ×ÉÚÎÁÞÅΦ\n"
-"(×¦Ä ÐÏÐÅÒÅÄÎØϧ ÕÓÔÁÎÏ×ËÉ ÓÉÓÔÅÍÉ GNU/Linux ÁÂÏ ÓÔ×ÏÒÅΦ ¦ÎÛÏÀ\n"
-"ÐÒÏÇÒÁÍÏÀ ÒÏÚÐÏĦÌÕ ÄÉÓËÕ), ×É ÍÏÖÅÔÅ ÓËÏÒÉÓÔÁÔÉÓÑ ×ÖÅ ÇÏÔÏ×ÉÍÉ\n"
-"ЦÄÒÏÚĦÌÁÍÉ. ÷ ¦ÎÛÏÍÕ ×ÉÐÁÄËÕ, ЦÄÒÏÚĦÌÉ ÎÁ ÖÏÒÓÔËÏÍÕ ÄÉÓËÕ ÍÁÀÔØ\n"
-"ÂÕÔÉ ×ÉÚÎÁÞÅÎÉÍÉ ÐÅÒÛ, Î¦Ö ÐÅÒÅÈÏÄÉÔÉ ÄÏ ÕÓÔÁÎÏ×ËÉ.\n"
-"\n"
-"äÌÑ ÓÔ×ÏÒÅÎÎÑ Ð¦ÄÒÏÚÄ¦Ì¦× ×É ÓÐÅÒÛÕ ÍÁ¤ÔÅ ×ÉÂÒÁÔÉ ÖÏÒÓÔËÉÊ ÄÉÓË. ÷É\n"
-"ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÄÉÓË ËÌÁÃÎÕ×ÛÉ ÎÁ \"hda\" (ÑËÝÏ ÍÏ×Á ÊÄÅ ÐÒÏ ÐÅÒÛÉÊ ÄÉÓË\n"
-"ÔÉÐÉ IDE), ÁÂÏ ÎÁ \"hdb\" (ÄÌÑ ÄÒÕÇÏÇÏ ÄÉÓËÕ × ÓÉÓÔÅͦ ÔÉÐÕ IDE), ÁÂÏ ÎÁ\n"
-"\"sda\", ÑËÝÏ ×É ÂÕÄÅÔÅ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ ÓÉÓÔÅÍÕ ÎÁ ÐÅÒÛÏÍÕ ÄÉÓËÕ ÔÉÐÕ SCSI\n"
-"¦ ÔÁË ÄÁ̦.\n"
-"\n"
-"ýÏ ÒÏÚÐÏĦÌÉÔÉ ÄÉÓË ÎÁ ÒÏÚĦÌÉ, ×É ÍÏÖÅÔÅ ÓËÏÒÉÓÔÁÔÉÓÑ ÃÉÍÉ ÐÕÎËÔÁÍÉ ÍÅÎÀ:\n"
-"\n"
-"* ïÞÉÓÔÉÔÉ ×ÓÅ: ÃÅÊ ÐÕÎËÔ ÓÔÉÒÁ¤ ×Ó¦ ЦÄÒÏÚĦÌÉ ÎÁ ×ÉÂÒÁÎÏÍÕ ÖÏÒÓÔËÏÍÕ "
-"ÄÉÓËÕ.\n"
-"\n"
-"* òÏÚÐÏĦÌÉÔÉ Á×ÔÏÍÁÔÉÞÎÏ: ÃÅÊ ÐÕÎËÔ ÍÅÎÀ ÄÏÐÏÍÏÖÅ ÷ÁÍ Á×ÔÏÍÁÔÉÞÎÏ\n"
-"ÓÔ×ÏÒÉÔÉ Ð¦ÄÒÏÚÄ¦Ì ÔÉÐÕ Ext2 ÔÁ swap ÎÁ צÌØÎÏÍÕ ÐÒÏÓÔÏÒ¦ ÄÉÓËÕ.\n"
-"\n"
-"* ÷¦ÄÎÏ×ÉÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×: ÑËÝÏ ÔÁÂÌÉÃÑ Ð¦ÄÒÏÚÄ¦Ì¦× ÷ÁÛÏÇÏ ÄÉÓËÕ\n"
-"Ú¦ÐÓÏ×ÁÎÁ, ×É ÍÏÖÅÔÅ ÓÐÅÒÛÕ ÓÐÒÏÂÕ×ÁÔÉ ×¦ÄÎÏ×ÉÔÉ §§ ÓËÏÒÉÓÔÕ×Á×ÛÉÓØ\n"
-"ÃÉÍ ÐÕÎËÔÏÍ. âÕÄØ-ÌÁÓËÁ, ÂÕÄØÔÅ-ÏÂÅÒÅÖÎÉÍÉ, ¦ ÐÁÍ'ÑÔÁÊÔÅ, ÝÏ ÃÅÊ ÐÕÎËÔ\n"
-"ÎÅ ÚÁ×ÖÄÉ ÓÐÒÁÃØÏ×Õ¤.\n"
-"\n"
-"* ðÏ×ÅÒÎÕÔÉÓØ: íÏÖÅÔÅ ÓËÏÒÉÓÔÕ×ÁÔÉÓØ ÃÉÍ, ÝÏ צÄÍÏ×ÉÔÉÓØ ×¦Ä ÚͦÎ,\n"
-"×ÎÅÓÅÎÉÈ ×ÁÍÉ.\n"
-"\n"
-"* ðÅÒÅÞÉÔÁÔÉ: íÏÖÅÔÅ ÓËÏÒÉÓÔÕ×ÁÔÉÓØ ÃÉÍ, ÝÏ צÄÍÏ×ÉÔÉÓØ ×¦Ä ÚͦÎ,\n"
-"×ÎÅÓÅÎÉÈ ×ÁÍÉ ¦ ÐÅÒÅÐÒÏÞÉÔÁÔÉ ÏÒÉ­¦ÎÁÌØÎÕ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×.\n"
-"\n"
-"\n"
-"* ðÏͦÞÎÉË: ñËÝÏ ×É ÈÏÞÅÔÅ ÓËÏÒÉÓÔÁÔÉÓØ ÐÏͦÞÎÉËÏÍ ÄÌÑ ÒÏÚÐÏĦÌÕ\n"
-"ÄÉÓËÕ. òÅËÏÍÅÎÄÏ×ÁÎÉÊ ÒÅÖÉÍ, ÑËÝÏ ×É ÎÅ ÍÁ¤ÔÅ ÇÌÉÂÏËÉÈ ÚÎÁÎØ ÐÒÏ\n"
-"ÒÏÚÐÏÄ¦Ì ÄÉÓËÕ. \n"
-"\n"
-"* ÷¦ÄÎÏ×ÉÔÉ Ú ÇÎÕÞËÏÇÏ ÄÉÓËÕ: ñËÝÏ ×É ÚÁÐÉÓÁÌÉ ÐÏÐÅÒÅÄÎØÏ Ó×ÏÀ ÔÁÂÌÉÃÀ\n"
-"ЦÄÒÏÚÄ¦Ì¦× ÎÁ ÇÎÕÞËÉÊ ÄÉÓË. úÁÒÁÚ ×É ÍÏÖÅÔŠצÄÎÏ×ÉÔÉ ÃÀ ÔÁÂÌÉÃÀ Ú\n"
-"ÇÎÕÞËÏÇÏ ÄÉÓËÕ.\n"
-"\n"
-"* úÁÐÉÓÁÔÉ ÎÁ ÇÎÕÞËÉÊ ÄÉÓË: ñËÝÏ ×É ÈÏÞÅÔÅ ÚÁÐÉÓÁÔÉ ÚÁÒÁÚ ÔÁÂÌÉÃÀ\n"
-"ЦÄÒÏÚÄ¦Ì¦× ÎÁ ÇÎÕÞËÉÊ ÄÉÓË ÄÌÑ ÔÏÇÏ, ÝÏ §§ ÐÏÔ¦Í ÍÏÖÎÁ ÂÕÌÏ\n"
-"צÄÎÏ×ÉÔÉ Ú ÄÉÓËÅÔÉ. äÕÖÅ ÒÅËÏÍÅÎÄÕ¤ÍÏ ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ ÃÉÍ ÒÅÖÉÍÏÍ. \n"
-"\n"
-"* çÏÔÏ×Ï: ð¦ÓÌÑ ÔÏÇÏ, ÑË ×É ×ÖÅ ÚÁ˦ÎÞÉÌÉ Ú ÐÅÒÅÒÏÚÐÏĦÌÏÍ ÷ÁÛÏÇÏ\n"
-"ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ, ÓËÏÒÉÓÔÁÊÔÅÓØ ÃÉÍ ÐÕÎËÔÏÍ, ÝÏ ÚÁÐÉÓÁÔÉ ÚͦÎÉ ÎÁ\n"
-"ÄÉÓË. \n"
-"\n"
-"ëÏÌÉ ÐÅ×ÎÉÊ Ð¦ÄÒÏÚÄ¦Ì ×ÉÂÒÁÎÏ, ÍÏÖÅÔÅ ÓËÏÒÉÓÔÕ×ÁÔÉÓØ ËÌÁצÛÁÍÉ:\n"
-"\n"
-" * Ctrl-c ÝÏ ÓÔ×ÏÒÉÔÉ ÎÏ×ÉÊ Ð¦ÄÒÏÚÄ¦Ì (ÑËÝÏ ×ÉÂÒÁÎÏ ÐÕÓÔÉÊ "
-"ЦÄÒÏÚĦÌ)\n"
-"\n"
-" * Ctrl-d ÝÏ ÓÔÅÒÔÉ Ð¦ÄÒÏÚĦÌ\n"
-"\n"
-" * Ctrl-m ÝÏ ×ÉÚÎÁÞÉÔÉ ÔÏÞËÕ ÍÏÎÔÕ×ÁÎÎÑ\n"
-"\n"
-"ñËÝÏ ×É ×ÓÔÁÎÏ×ÌÀ¤ÔÅ ÓÉÓÔÅÍÕ ÎÁ ËÏÍÐ'ÀÔÅÒ Ú ÐÒÏÃÅÓÏÒÏÍ PPC, ×É ÍÏÖÅÔÅ\n"
-"ÓÔ×ÏÒÉÔÉ ÍÁÌÅÎØËÉÊ Ð¦ÄÒÏÚÄ¦Ì ÔÉÐÕ HFS ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ 'bootstrap'\n"
-"(ÒÏÚͦÒÏÍ ÎÅ ÍÅÎÛÅ 1í ÄÌÑ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ yaboot. ñËÝÏ ×É ×ÉÒ¦ÛÉÔÅ\n"
-"ÓÔ×ÏÒÉÔÉ Ð¦ÄÒÏÚÄ¦Ì ÔÒÏÈÉ Â¦ÌØÛÏÇÏ ÒÏÚͦÒÕ (ÓËÁÖ¦ÍÏ 50íÂ, ×É ÚÍÏÖÅÔÅ\n"
-"ÔÁËÏÖ ÚÂÅÒ¦ÇÁÔÉ ÎÁ ÎØÏÍÕ ÒÅÚÅÒ×ÎÅ ÑÄÒÏ ÓÉÓÔÅÍÉ ÔÁ צÒÔÕÁÌØÎÉÊ ÄÉÓË ÄÌÑ\n"
-"Á×ÁÒ¦ÊÎÉÈ ÚÁ×ÁÎÔÁÖÅÎØ ÓÉÓÔÅÍÉ). "
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-"ôÅÐÅÒ ÞÁÓ ×ÉÂÒÁÔÉ Ò¦×ÅÎØ ÄÏÓÔÕÐÕ (ÂÅÚÐÅËÉ) ÄÌÑ ÷ÁÛϧ ÓÉÓÔÅÍÉ. úÏÌÏÔÅ\n"
-"ÐÒÁ×ÉÌÏ: ÞÉÍ ÛÉÒÛÅ ËÏÌÏ ÄÏÓÔÕÐÕ ÍÁ¤ ÍÁÛÉÎÁ, ¦ ÞÉÍ ×ÁÖÌÉצۦ ÄÁΦ, ÝÏ ×\n"
-"Î¦Ê ÚÂÅÒ¦ÇÁÀÔØÓÑ, ÔÉÍ ×ÉÝÉÍ ÍÁ¤ ÂÕÔÉ Ò¦×ÅÎØ ÂÅÚÐÅËÉ ÓÉÓÔÅÍÉ. áÌÅ ×\n"
-"¦ÌØÛÏÓÔ¦ ×ÉÐÁÄ˦×, ×ÉÝÉÊ Ò¦×ÅÎØ ÂÅÚÐÅËÉ ÄÏÓÑÇÁ¤ÔØÓÑ ÚÁ ÒÁÈÕÎÏË\n"
-"ÄÏÄÁÔËÏ×ÉÈ ÎÅÚÒÕÞÎÏÓÔÅÊ × ËÏÒÉÓÔÕ×ÁÎΦ. äÏÄÁÔËÏ×Õ ¦ÎÆÏÒÍÁæÀ Ú ÃØÏÇÏ\n"
-"ÐÉÔÁÎÎÑ ÍÏÖÎÁ ÏÔÒÉÍÁÔÉ Ú ÓÅËæ§ MSEC × äÏצÄËÏ×ÏÍÕ ðÏÓ¦ÂÎÉËÕ.\n"
-"\n"
-"ñËÝÏ ÷É ÎÅ ÚÎÁ¤ÔÅ, ÎÁ ÞÏÍÕ ÚÕÐÉÎÉÔÉÓØ, ÚÁÌÉÛÔÅ ×ÓÅ ÑË ¤."
-#: ../../help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
-msgstr ""
+msgid "Enabling servers..."
+msgstr "÷ÍÉËÁÀ ÓÅÒ×ÅÒÉ..."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"âÕÄØ-ÑËÉÊ Ú ÎÏ×ÉÈ ×ÉÚÎÁÞÅÎÉÈ Ð¦ÄÒÏÚÄ¦Ì¦× ÍÁ¤ ÂÕÔÉ ×¦ÄÆÏÒÍÁÔÏ×ÁÎÉÊ ÄÌÑ\n"
-"×ÉËÏÒÉÓÔÁÎÎÑ (ÆÏÒÍÁÔÕ×ÁÎÎÑ ÏÚÎÁÞÁ¤ ÓÔ×ÏÒÅÎÎÑ ÆÁÊÌÏ×ϧ ÓÉÓÔÅÍÉ).\n"
-"\n"
-"úÁÒÁÚ ÷É, ÍÏÖÌÉ×Ï, ÚÁÈÏÞÅÔŠצÄÆÏÒÍÁÔÕ×ÁÔÉ ÄÅÑ˦ Ú ÕÖÅ ¦ÓÎÕÀÞÉÈ\n"
-"ЦÄÒÏÚÄ¦Ì¦× ÄÌÑ ÔÏÇÏ, ÝÏ ÓÔÅÒÔÉ ÄÁΦ, Ñ˦ ÎÁ ÎÉÈ ÚÁÐÉÓÁΦ. ñËÝÏ ÷É\n"
-"ÈÏÞÅÔÅ ÃÅ ÚÒÏÂÉÔÉ, ×ÉÂÅÒ¦ÔØ ÔÁËÏÖ Ð¦ÄÒÏÚĦÌÉ, Ñ˦ ×É ÈÏÞÅÔÅ\n"
-"צÄÆÏÒÍÁÔÕ×ÁÔÉ.\n"
-"\n"
-"úÁÕ×ÁÖÔÅ, ÏÄÎÁË, ÝÏ ÎÅ ÏÂÏ×'ÑÚËÏ×Ï ÆÏÒÍÁÔÕ×ÁÔÉ ×Ó¦ ЦÄÒÏÚĦÌÉ, Ñ˦\n"
-"¦ÓÎÕ×ÁÌÉ ÒÁΦÛÅ. ÷É ÍÁ¤ÔŠצÄÆÏÒÍÁÔÕ×ÁÔÉ Ð¦ÄÒÏÚĦÌÉ, Ñ˦ ͦÓÔÑÔØ\n"
-"ÏÐÅÒÁæÊÎÕ ÓÉÓÔÅÍÕ (ÔÁ˦, ÑË \"/\", \"/usr\" ÞÉ \"/var\"), ÁÌÅ ×É ÎÅ ÍÁ¤ÔÅ\n"
-"ÆÏÒÍÁÔÕ×ÁÔÉ Ô¦ ÒÏÚĦÌÉ, Ñ˦ ͦÓÔÑÔØ ÄÁΦ, Ñ˦ ×É Â ÈÏÔ¦ÌÉ ÚÂÅÒÅÇÔÉ\n"
-"(ÔÉÐÏ×Ï ÃŠЦÄÒÏÚÄ¦Ì \"/home\").\n"
-"\n"
-"âÕÄØÔÅ Õ×ÁÖΦ Ú ×ÉÂÏÒÏÍ Ð¦ÄÒÏÚĦ̦×. ð¦ÓÌÑ ÆÏÒÍÁÔÕ×ÁÎÎÑ ×Ó¦ ÄÁΦ ÎÁ\n"
-"ЦÄÒÏÚĦÌÁÈ ÂÕÄÕÔØ ÓÔÅÒÔ¦ ¦ ×É ÎÅ ÚÍÏÖÅÔŠצÄÎÏ×ÉÔÉ Î¦ÞÏÇÏ Ú ÎÉÈ.\n"
-"\n"
-"ëÌÁÃΦÔØ ÎÁ \"çÁÒÁÚÄ\" ËÏÌÉ ×É ÇÏÔÏצ ÐÒÉÓÔÕÐÉÔÉ ÄÏ ÆÏÒÍÁÔÕ×ÁÎÎÑ\n"
-"ЦÄÒÏÚĦ̦×.\n"
-"\n"
-"ëÌÁÃΦÔØ ÎÁ \"÷¦ÄͦÎÉÔÉ\", ÑËÝÏ ×É ÈÏÞÅÔÅ ×ÉÂÒÁÔÉ ¦ÎÛ¦ ЦÄÒÏÚĦÌÉ ÄÌÑ\n"
-"ÔÏÇÏ, ÝÏ ×ÓÔÁÎÏ×ÉÔÉ ÎÏ×Õ ÓÉÓÔÅÍÕ íÁÎÄÒÅÊË ì¦ÎÁËÓ.\n"
-"\n"
-"îÁÔÉÓΦÔØ ÎÁ äÏÄÁÔËÏ×Ï, ÑËÝÏ ÷É ÈÏÞÅÔÅ ×ÉÂÒÁÔÉ Ð¦ÄÒÏÚĦÌÉ ÄÌÑ §ÈÎØϧ\n"
-"ÐÅÒÅצÒËÉ ÎÁ ¦ÓÎÕ×ÁÎÎÑ Ú¦ÊÎÉÈ ÂÌÏ˦×."
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "äÒÕËÕÀ ÔÅÓÔÏ×Õ ÓÔÏÒ¦ÎËÕ(ÓÔÏÒ¦ÎËÉ)..."
-#: ../../help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
+msgid "There is already a partition with mount point %s\n"
+msgstr "÷ÖÅ ¤ ЦÄÒÏÚÄ¦Ì Ú ÔÏÞËÏÀ ÍÏÎÔÕ×ÁÎÎÑ %s\n"
#: ../../help.pm:1
#, fuzzy, c-format
@@ -2144,51 +1914,49 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
"ôÅÐÅÒ ×É ÍÁ¤ÔÅ ×ÉÂÒÁÔÉ ÄÅ ÓÁÍÅ ×É Â ÈÏÔ¦ÌÉ ×ÓÔÁÎÏ×ÉÔÉ Ó×ÏÀ ÓÉÓÔÅÍÕ\n"
"íÁÎÄÒÅÊË ì¦ÎÁËÓ ÎÁ ÖÏÒÓÔËÏÍÕ ÄÉÓËÕ. ñËÝÏ ÄÉÓË ÐÕÓÔÉÊ, ÁÂÏ ÑËÝÏ ×¦Î\n"
@@ -2257,192 +2025,120 @@ msgstr ""
"ÎÅÂÅÚÐÅÞÎÉÊ ÒÅÖÉÍ. ÷É ÍÏÖÅÔÅ ×ÔÒÁÔÉÔÉ ×Ó¦ ÄÁΦ ÄÕÖÅ ÐÒÏÓÔÏ. ïÔÖÅ, ÎÅ\n"
"×ÉÂÉÒÁÊÔÅ ÃÅÊ ÒÅÖÉÍ, ÑËÝÏ ÄÏÂÒÅ ÎÅ ÒÏÚÕͦ¤ÔÅ, ÝÏ ÓÁÍÅ ×É ÒÏÂÉÔÅ."
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"ð¦ÓÌÑ ÃØÏÇÏ ÷ÁÍ ÂÕÄÅ ÚÁÄÁÎÅ ÚÁÐÉÔÁÎÎÑ, ÞÉ ÈÏÔ¦ÌÉ Â ÷É, ÝÏ ÇÒÁƦÞÎÉÊ\n"
-"¦ÎÔÅÒÆÅÊÓ ×ÍÉËÁ×ÓÑ Á×ÔÏÍÁÔÉÞÎÏ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ. úÁÕ×ÁÖÔÅ, ÝÏ\n"
-"ÃÅ ÚÁÐÉÔÁÎÎÑ ÂÕÄÅ ÚÁÄÁÎÅ ÎÁצÔØ ÑËÝÏ ÷É ×¦ÄÍÏ×ÉÔÅÓØ ×¦Ä ×ÉÐÒÏÂÏ×Õ×ÁÎÎÑ\n"
-"ËÏÎƦ­ÕÒÁæ§. ú×ÉÞÁÊÎÏ Ö, ÑËÝÏ ÷ÁÛÁ ÍÁÛÉÎÁ ÂÕÄÅ ÐÒÁÃÀ×ÁÔÉ ÓÅÒ×ÅÒÏÍ,\n"
-"ÁÂÏ ÑËÝÏ ÷É ÎÅ ÚÍÏÇÌÉ ×¦ÒÎÏ ÎÁÓÔÒϧÔÉ X, ÔÕÔ ËÒÁÝŠצÄÐÏצÓÔÉ \"î¦\"."
+msgid "Ukraine"
+msgstr "õËÒÁ§ÎÁ"
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Application:"
+msgstr "á×ÔÅÎÔÉËÁæÑ"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
+msgid "External ISDN modem"
+msgstr "úÏ×ΦÛÎ¦Ê ÍÏÄÅÍ ISDN"
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
+msgid "if set to yes, report check result by mail."
msgstr ""
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+msgid "Your choice? (default %s) "
+msgstr "÷ÁÛ ×ɦÒ? (ÒÅËÏÍÅÎÄÏ×ÁÎÉÊ %s) "
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
msgstr ""
-#: ../../help.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "òÅΦÏÎ"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
msgstr ""
+"ôÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ ÐÅÒÅÄÁÎÁ ÐÒÏÇÒÁͦ ÄÒÕËÕ.\n"
+"ðÅÒÅÄ ÔÉÍ, ÑË ÐÒÉÎÔÅÒ ÐÏÞÎÅ ÄÒÕËÕ×ÁÔÉ, ÍÏÖÌÉ×Ï ÐÒÏÊÄÅ \n"
+"ÄÅÑËÉÊ ÞÁÓ.\n"
+"óÔÁÔÕÓ ÄÒÕËÕ:\n"
+"%s\n"
+"\n"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
+msgid "daily"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ Ñ˦ ÓÅÒצÓÉ ÂÕÄÕÔØ ÚÁÐÕÓËÁÔÉÓÑ Á×ÔÏÍÁÔÉÞÎÏ ÐÒÉ\n"
-"ÓÔÁÒÔ¦ ÓÉÓÔÅÍÉ. \n"
-"\n"
-"ôÕÔ ÎÁÄÁ¤ÔØÓÑ ÓÐÉÓÏË ×Ó¦È ÓÌÕÖÂ, ÝÏ ÍÏÖÕÔØ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉÓÑ ÐÒÏÇÒÁÍÏÀ\n"
-"ÕÓÔÁÎÏ×ËÉ. ðÅÒÅÇÌÑÎØÔÅ Õ×ÁÖÎÏ Ã¦ ÓÌÕÖÂÉ ¦ צÄͦΦÔØ ×ÉÂ¦Ò ÔÉÈ, Ñ˦ ÎÅ\n"
-"ÐÏ×ÉÎΦ ÚÁÐÕÓËÁÔÉÓÑ ÐÒÉ ÓÔÁÒÔ¦ ÓÉÓÔÅÍÉ.\n"
-"\n"
-"ëÏÌÉ ÷ÁÛÁ ÍÉÛËÁ ÎÁÓÕ×Á¤ÔØÓÑ ÎÁ ÏÄÉÎ ¦Ú ÐÕÎËÔ¦×, ÎÅ×ÅÌÉÞËÁ ËÕÌØËÁ ¦Ú\n"
-"ЦÄÓËÁÚËÏÀ Ú'Ñ×ÉÔØÓÑ, ÑËÁ ÏÐÉÓÕ¤ ÆÕÎËæ§ ÄÁÎÏÇÏ ÓÅÒצÓÕ.\n"
-"\n"
-"âÕÄØÔÅ ÏÓÏÂÌÉ×Ï Õ×ÁÖÎÉÍÉ, ÑËÝÏ ×É ÚÂÉÒÁ¤ÔÅÓØ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÃÀ\n"
-"ÓÉÓÔÅÍÕ ÑË ÓÅÒ×ÅÒ: ÎÁÐÅ×ÎÅ ÎÅ ÐÏÔÒ¦ÂÎÏ ÓÔÁÒÔÕ×ÁÔÉ Î¦Ñ˦ ÓÅÒצÓÉ, Ñ˦\n"
-"ÎÅ ÂÕÄÕÔØ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ. ðÁÍ'ÑÔÁÊÔÅ, ÂÕÄØ-ÌÁÓËÁ, ÝÏ ÄÅÑ˦ ×ÍÉËÎÅΦ\n"
-"ÓÅÒצÓÉ ÍÏÖÕÔØ ÂÕÔÉ ÎÅÂÅÚÐÅÞÎÉÍÉ ÎÁ ÓÅÒ×ÅÒ¦.\n"
-"ñË ÚÁÇÁÌØÎÅ ÐÒÁ×ÉÌÏ, ×ÉÂÉÒÁÊÔÅ Ô¦ÌØËÉ Ô¦ ÓÅÒצÓÉ, Ñ˦ ÷ÁÍ ÓÐÒÁ×Ħ \n"
-"ÎÅÏÂȦÄΦ."
+msgid "and one unknown printer"
+msgstr "äÏÄÁÔÉ ÐÒÉÎÔÅÒ"
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Ireland"
+msgstr "¶ÓÌÁÎÄÓØËÁ"
+
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
+msgid "kernel version"
+msgstr "×ÅÒÓ¦Ñ ÑÄÒÁ"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " Restore Configuration "
+msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
+
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Is this the correct setting?"
+msgstr "÷ÓŠצÒÎÏ?"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2480,6715 +2176,6675 @@ msgstr ""
"ñËÝÏ Ö ÷É ÈÏÞÅÔÅ ÓËÏÎƦ­ÕÒÕ×ÁÔÉ ÍÅÒÅÖÕ Ð¦ÚΦÛÅ, ЦÓÌÑ ÕÓÔÁÎÏ×ËÉ,\n"
"ÎÁÔÉÓΦÔØ ÎÁ \"úÁ˦ÎÞÅÎÏ\"."
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-"¶ ÎÁÒÅÛÔ¦, × ÚÁÌÅÖÎÏÓÔ¦ ×¦Ä ÔÏÇÏ, ÞÉ ÷É ×ÉÂÒÁÌÉ ¦ÎÄÉצÄÕÁÌØÎÉÊ ×ɦÒ\n"
-"ÐÁËÅÔ¦× ÞÉ Î¦, ÷ÁÍ ÂÕÄÅ ÐÏËÁÚÁÎÏ ÐÏ×ÎÅ ÄÅÒÅ×Ï ÐÁËÅÔ¦× Ú¦ÂÒÁÎÉÈ ÐÏ\n"
-"ÇÒÕÐÁÈ ¦ ЦÄÇÒÕÐÁÈ. ðÅÒÅÇÌÑÄÁÀÞÉ ÐÁËÅÔÉ ÷É ÚÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÐÏ×Φ\n"
-"ÇÒÕÐÉ, ЦÄÇÒÕÐÉ ÔÁ ¦ÎÄÉצÄÕÁÌØΦ ÐÁËÅÔÉ.\n"
-"\n"
-"ëÏÖÎÏÇÏ ÒÁÚÕ, ËÏÌÉ ÷É ×ÉÂÉÒÁ¤ÔÅ ÐÁËÅÔ × ÄÅÒÅצ, Ú'Ñ×ÌÁ¤ÔØÓÑ Ð¦ÄËÁÚËÁ,\n"
-"ÐÒÁ×ÏÒÕÞ ×¦Ä ÎÁÚ×É. \n"
-" \n"
-"ð¦ÓÌÑ ÔÏÇÏ, ÑË ÷É ÚÁ˦ÎÞÉÌÉ ×ÉÂ¦Ò ÐÁËÅÔ¦×, ÎÁÔÉÓΦÔØ ËÎÏÐËÕ\n"
-"÷ÓÔÁÎÏ×ÉÔÉ. ðÏÞÎÅÔØÓÑ ×ÌÁÓÎÅ ÕÓÔÁÎÏ×ËÁ ÓÉÓÔÅÍÉ. ñËÝÏ Ë¦ÌØ˦ÓÔØ\n"
-"×ÉÂÒÁÎÉÈ ÐÁËÅÔ¦× ×ÅÌÉËÁ, ÍÏÖÅÔŠЦÔÉ ÐÏÐÉÔÉ ËÁ×É.\n"
-"\n"
-"!! ñËÝÏ ÁÂÏ ÎÁ×ÍÉÓÎÅ, ÁÂÏ ÑË ÓËÌÁÄÏ×Á ÞÁÓÔÉÎÁ ÑËϧÓØ ÇÒÕÐÉ, ÂÕÌÏ\n"
-"×ÉÂÒÁÎÏ ÄÌÑ ÕÓÔÁÎÏ×ËÉ ÐÅ×Φ ÓÅÒ×ÅÒÉ, ÷ÁÍ ÂÕÄÅ ÚÁÄÁÎÅ ÚÁÐÉÔÁÎÎÑ, ÞÉ ÷É\n"
-"ÓÐÒÁ×Ħ ÂÁÖÁ¤ÔÅ ÂÁÞÉÔÉ Ã¦ ÓÅÒ×ÅÒÉ ×ÓÔÁÎÏ×ÌÅÎÉÍÉ. ÷ íÁÎÄÒÅÊËÕ ×Ó¦\n"
-"×ÓÔÁÎÏ×ÌÅΦ ÓÅÒ×ÅÒÉ Á×ÔÏÍÁÔÉÞÎÏ ÚÁÐÕÓËÁÀÔØÓÑ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ\n"
-"ÓÉÓÔÅÍÉ. îÁצÔØ, ÑËÝÏ ÎÁ ÞÁÓ ËÕЦ×̦ ÓÉÓÔÅÍÉ ÎÅ ÂÕÌÏ ×¦ÄÏÍÏ ÐÒÏÂÌÅÍ Ú\n"
-"ÂÅÚÐÅËÏÀ ÄÁÎÉÈ ÓÅÒ×ÅÒ¦×, ÍÏÖÌÉ×Ï, ÝÏ × Ð¦ÚΦÛÉÊ ÞÁÓ ÔÁ˦ ÐÒÏÂÌÅÍÉ\n"
-"ÂÕÄÕÔØ ×ÉÑ×ÌÅΦ. ïÓÏÂÌÉ×Ï, ÑËÝÏ ÷É ÎÅ ÚÎÁ¤ÔÅ ÐÒÏ ÝÏ ÊÄÅ ÍÏ×Á,\n"
-"ÎÁÔÉÓΦÔØ ÔÕÔ ÎÁ î¦. ñËÝÏ ÷É ÎÁÔÉÓÎÅÔÅ ôÁË, ÓÅÒ×ÅÒÉ ÂÕÄÕÔØ ×ÓÔÁÎÏ×ÌÅΦ\n"
-"¦ ×ÍÉËÎÅΦ ÎÅÑ×ÎÏ!!\n"
-"\n"
-"ïÐÃ¦Ñ á×ÔÏÍÁÔÉÞΦ ÚÁÌÅÖÎÏÓÔ¦ ÚÁÂÏÒÏÎѤ ÐÏÐÅÒÅÄÖÅÎÎÑ ËÏÌÉ ÐÒÏÇÒÁÍÁ\n"
-"ÕÓÔÁÎÏ×ËÉ ÚÎÁÈÏÄÉÔØ, ÝÏ Ô¦ÌØËÉ ÝÏ ×ÉÂÒÁÎÉÊ (ÞÉ ×¦ÄͦÎÅÎÉÊ ×ɦÒ) ÐÁËÅÔ\n"
-"ÚÁÌÅÖÉÔØ ×¦Ä ¦ÎÛÏÇÏ ÐÁËÅÔÕ.\n"
-"\n"
-"íÁÌÅÎØËÁ ЦËÔÏÇÒÁÍÁ ÇÎÕÞËÏÇÏ ÄÉÓËÁ × ÓÁÍÏÍÕ ÎÉÚÕ ÓÐÉÓËÕ ÄÏÚ×ÏÌѤ\n"
-"ÚÁ×ÁÎÔÁÖÉÔÉ ÓÐÉÓÏË ÐÁËÅÔ¦× Ú ÄÉÓËÅÔÉ, ÑËÝÏ ÐÒÉ ÐÏÐÅÒÅÄÎ¦Ê ÕÓÔÁÎÏ×æ ÷É\n"
-"ÚÂÅÒÅÇÌÉ ÊÏÇÏ ÎÁ ÄÉÓËÅÔÕ. ð¦ÓÌÑ ÎÁÔÉÓËÁÎÎÑ Ã¦¤§ ËÎÏÐËÉ, ÓÉÓÔÅÍÁ\n"
-"ÐÏÐÒÏÓÉÔØ ×ÓÔÁ×ÉÔÉ ÄÉÓËÅÔÕ ¦Ú ÓÐÉÓËÏÍ ÐÁËÅÔ¦× Õ ÐÒÉצÄ. äÏÄÁÔËÏ×Ï ÷É\n"
-"ÍÏÖÅÔÅ ÏÔÒÉÍÁÔÉ ¦ÎÆÏÒÍÁæÀ ÐÒÏ ÔÅ, ÑË ÓÔ×ÏÒÉÔÉ ÔÁËÕ ÄÉÓËÅÔÕ × ÄÒÕǦÊ\n"
-"ÐÏÒÁĦ ÏÓÔÁÎÎØÏÇÏ ÐÕÎËÔÕ."
+msgid "Wizard Configuration"
+msgstr "ëÏÎƦ­ÕÒÁæÑ"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"ôÅÐÅÒ ÞÁÓ ×ÉÂÒÁÔÉ, Ñ˦ ÐÒÏÇÒÁÍÉ ÷É ÈÏÞÅÔÅ ÍÁÔÉ × Ó×ϧÊ\n"
-"ÓÉÓÔÅͦ. íÁÎÄÒÅÊË ì¦ÎÁËÓ ÍÁ¤ ÔÉÓÑÞ¦ ÐÒÏÇÒÁÍÎÉÈ ÐÁËÅÔ¦×, ¦ ÷ÁÍ ÎÅÍÁ¤\n"
-"ÎÅÏÂȦÄÎÏÓÔ¦ ÚÎÁÔÉ §È ×Ó¦. \n"
-"\n"
-"ñËÝÏ ÷É ×ÓÔÁÎÏ×ÌÀ¤ÔÅ ÓÉÓÔÅÍÕ ¦Ú ÓÔÁÎÄÁÒÔÎÏÇÏ ËÏÍÐÁËÔ-ÄÉÓËÕ, ÷ÁÍ\n"
-"ÓÐÏÞÁÔËÕ ÂÕÄÅ ÚÁÄÁÎÅ ÚÁÐÉÔÁÎÎÑ, Ñ˦ ÄÉÓËÉ ÷É ÍÁ¤ÔÅ. ðÅÒÅצÒÔÅ Ó×ϧ\n"
-"ËÏÍÐÁËÔ-ÄÉÓËÉ, צÄͦÔØÔŠצÄÐÏצÄΦ ÐÕÎËÔÉ ÎÁ ÅËÒÁΦ ¦ ÎÁÔÉÓΦÔØ\n"
-"çÁÒÁÚÄ.\n"
-"\n"
-"ðÁËÅÔÉ Ú¦ÂÒÁΦ Õ ÇÒÕÐÉ ÐÁËÅÔ¦×, צÄÐÏצÄÎÏ ÄÏ ËÏÎËÒÅÔÎÏÇÏ ×ÖÉÔËÕ ÄÌÑ\n"
-"ÍÁÛÉÎÉ.\n"
-"\n"
-"çÒÕÐÉ ÐÁËÅÔ¦× ÒÏÚĦÌÅΦ ÎÁ ÞÏÔÉÒÉ ×ÅÌÉ˦ ÒÏÚĦÌÉ:\n"
-"\n"
-"* òÏÂÏÞÁ ÓÔÁÎæÑ: ÑËÝÏ ÷ÁÛÁ ÍÁÛÉÎÁ ÂÕÄÅ ×ÖÉ×ÁÔÉÓÑ ÑË ÒÏÂÏÞÁ ÓÔÁÎæÑ,\n"
-"×ÉÂÅÒ¦ÔØ ÏÄÎÕ ÞÉ Ë¦ÌØËÁ צÄÐÏצÄÎÉÈ ÇÒÕÐ.\n"
-"\n"
-"* çÒÁƦÞΦ ÓÅÒÅÄÏ×ÉÝÁ: ÷ÉÂÅÒ¦ÔØ ÇÒÁƦÞÎÅ ÓÅÒÅÄÏ×ÉÝÅ ÓϦ ÄÏ\n"
-"×ÐÏÄÏÂÉ. ÷ÉÂÅÒ¦ÔØ ÈÏÞÁ  ÏÄÎÅ, ÑËÝÏ ÷É ÈÏÞÅÔÅ ×ÖÉ×ÁÔÉ ÍÁÛÉÎÕ ÑË ÒÏÂÏÞÕ\n"
-"ÓÔÁÎæÀ.\n"
-"\n"
-"* òÏÚÒÏÂËÁ: ×ÉÂÅÒ¦ÔØ ×¦ÄÐÏצÄΦ ÇÒÕÐÉ, ÑËÝÏ ÃÑ ÍÁÛÉÎÁ ÂÕÄÅ ×ÖÉ×ÁÔÉÓÑ\n"
-"ÄÌÑ ÐÒÏÇÒÁÍÕ×ÁÎÎÑ.\n"
-"\n"
-"* óÅÒ×ÅÒ: ÎÁÒÅÛÔ¦, ÑËÝÏ ÍÁÛÉÎÁ ÂÕÄÕ¤ÔØÓÑ ÄÌÑ ×ÉËÏÒÉÓÔÁÎÎÑ × ÑËÏÓÔ¦\n"
-"ÓÅÒ×ÅÒÁ, ÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÎÁʦÌØÛ ÒÏÚÐÏ×ÓÀÄÖÅΦ ÓÅÒצÓÉ, Ñ˦ ÷É\n"
-"ÈÏÞÅÔÅ ÂÁÞÉÔÉ ÎÁ Ó×Ï§Ê ÍÁÛÉΦ.\n"
-"\n"
-"ðÅÒÅÓÕ×ÁÎÎÑ ËÕÒÓÏÒÁ ¦ ËÏÒÏÔËÁ ÚÕÐÉÎËÁ ÎÁÄ ÐÅ×ÎÉÍ ÐÕÎËÔÏÍ ÂÕÄÅ\n"
-"×ÉÓצÞÕ×ÁÔÉ Ð¦ÄËÁÚËÕ ÐÏ ÄÁÎ¦Ê ÇÒÕЦ.\n"
-"\n"
-"ñËÝÏ ÷É ÎÁÔÉÓÎÅÔÅ ÎÁ ËÎÏÐËÕ äÏÄÁÔËÏ×Ï, ÷É ÂÕÄÅÔÅ ÍÁÔÉ ÍÏÖÌÉצÓÔØ\n"
-"×ÉÂÒÁÔÉ ÏËÒÅͦ ÐÁËÅÔÉ ÏÄÉÎ ÐÏ ÏÄÎÏÍÕ. ãÅ ÚÒÕÞÎÏ, ÑËÝÏ ÷É ÄÏÂÒÅ ÚÎÁ¤ÔÅ,\n"
-"Ñ˦ ÐÁËÅÔÉ ×ÓÔÁÎÏ×ÌÀÀÔØÓÑ, ÁÂÏ ÑËÝÏ ÷É ÈÏÞÅÔÅ ÍÁÔÉ ÐÏ×ÎÉÊ ËÏÎÔÒÏÌØ ÎÁÄ\n"
-"ÔÉÍ, ÝÏ ×ÓÔÁÎÏ×ÌÀ¤ÔØÓÑ × ÓÉÓÔÅͦ. \n"
-"\n"
-"ñËÝÏ ÷É ÐÏÞÁÌÉ ÕÓÔÁÎÏ×ËÕ × ÒÅÖÉͦ \"ðÏÎÏ×ÌÅÎÎÑ\", ÷É ÍÏÖÅÔŠצÄͦÎÉÔÉ\n"
-"×ÉÂ¦Ò ×Ó¦È ÇÒÕÐ ÝÏÂ Õ ÓÉÓÔÅͦ ÎÅ ×ÓÔÁÎÏ×ÌÀ×ÁÌÉÓØ Î¦Ñ˦ ÎÏצ ÐÁËÅÔÉ ¦\n"
-"Ô¦ÌØËÉ ÓÉÓÔÅÍÁ ÐÏÎÏ×ÉÌÁÓØ. "
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Autoprobe"
+msgstr "á×ÔÏÔÅÓÔ"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup system files..."
msgstr ""
-"äÉÓÔÒÉÂÕÔÉ× íÁÎÄÒÅÊË ì¦ÎÁËÓ ÒÏÚͦÝÅÎÉÊ ÎÁ ˦ÌØËÏÈ\n"
-"ËÏÍÐÁËÔ-ÄÉÓËÁÈ. íÏÖÌÉ×Ï, drakX ×ÉÂÒÁ× ÐÁËÅÔÉ, ÝÏ ÚÎÁÈÏÄÑÔØÓÑ ÎÁ ¦ÎÛÉÈ\n"
-"ÄÉÓËÁÈ (צÄͦÎÎÉÈ ×¦Ä ÕÓÔÁÎÏ×ÏÞÎÏÇÏ). ëÏÌÉ ÄÌÑ ÕÓÔÁÎÏ×ËÉ ÂÕÄÅ ÐÏÔÒ¦ÂÅÎ\n"
-"¦ÎÛÉÊ ÄÉÓË, ÐÒÏÇÒÁÍÁ ×ÉÔÑÇÎÅ ÄÁÎÉÊ ËÏÍÐÁËÔ-ÄÉÓË ¦ ÐÏÐÒÏÓÉÔØ ×ÓÔÁ×ÉÔÉ\n"
-"ÐÏÔÒ¦ÂÎÉÊ. "
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"÷ÉÝÅ ÐÅÒÅ̦ÞÅΦ ×ÖÅ ¦ÓÎÕÀÞ¦ ЦÄÒÏÚĦÌÉ, ÚÎÁÊÄÅΦ ÎÁ ÷ÁÛÏÍÕ ÖÏÒÓÔËÏÍÕ\n"
-"ÄÉÓËÕ. ÷É ÍÏÖÅÔÅ ÐÒÉÔÒÉÍÕ×ÁÔÉÓØ ËÏÎƦ­ÕÒÁæ§, ×ÓÔÁÎÏ×ÌÅÎϧ\n"
-"ÐÏͦÞÎÉËÏÍ. ãÑ ËÏÎƦ­ÕÒÁÃ¦Ñ Ð¦ÄÈÏÄÉÔØ ÄÌÑ Â¦ÌØÛÏÓÔ¦ ×ÉÐÁÄ˦×\n"
-"×ÉËÏÒÉÓÔÁÎÎÑ ÓÉÓÔÅÍÉ. ñËÝÏ ×É ×ÉÒ¦ÛÉÔÅ ÚͦÎÉÔÉ ÃÀ ËÏÎƦ­ÕÒÁæÀ, ÑË\n"
-"ͦΦÍÕÍ ÷É ÍÁ¤ÔÅ ×ÉÚÎÁÞÉÔÉ ËÏÒÅÎÅ×Õ ÆÁÊÌÏ×Õ ÓÉÓÔÅÍÕ (/). îÅ ×ÉĦÌÑÊÔÅ\n"
-"ÄÌÑ ÃØÏÇÏ ÚÁÎÁÄÔÏ ÍÁÌÉÊ Ð¦ÄÒÏÚĦÌ, ÂÏ ¦ÎÁËÛÅ ×É ÎÅ ÚÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ\n"
-"×ÓÅ ÐÏÔÒ¦ÂÎÅ ÐÒÏÇÒÁÍÎÅ ÚÁÂÅÚÐÅÞÅÎÎÑ. ñËÝÏ ×É ÂÁÖÁ¤ÔÅ ÚÂÅÒÅÇÔÉ ×Ó¦ Ó×ϧ\n"
-"ÄÁΦ ÎÁ ÏËÒÅÍÏÍÕ Ð¦ÄÒÏÚĦ̦, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ ÔÁËÏÖ ×ÉÂÒÁÔÉ Ð¦ÄÒÏÚĦÌ\n"
-"ÄÌÑ \"/home\" (Ô¦ÌØËÉ × ÔÏÍÕ ×ÉÐÁÄËÕ, ÑËÝÏ ×É ÍÁ¤ÔŠ¦ÌØÛÅ ÏÄÎÏÇÏ\n"
-"ЦÄÒÏÚĦÌÁ ÄÌÑ ì¦ÎÁËÓÁ). \n"
-"\n"
-"ëÏÖÅΠЦÄÒÏÚÄ¦Ì ÐÏÄÁÎÉÊ × ÔÁËÏÍÕ ×ÉÇÌÑĦ: \"îÁÚ×Á\", \"ïÂ'¤Í\".\n"
-"\n"
-"îÁÚ×Á ÒÏÚÛÉÆÒÏ×Õ¤ÔØÓÑ ÔÁË: \"ÔÉÐ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ\", \"ÎÏÍÅÒ ÖÏÒÓÔËÏÇÏ\n"
-"ÄÉÓËÕ\", \"ÎÏÍÅÒ Ð¦ÄÒÏÚĦÌÕ ÎÁ ÄÉÓËÕ\", (îÁÐÒÉËÌÁÄ: \"hda1\").\n"
-"\n"
-"\"ôÉÐ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ\" - ÃÅ \"hd\", ÑËÝÏ ×É ÍÁ¤ÔÅ ÄÉÓË ÔÉÐÕ IDE, ¦ \"sd\",\n"
-"ÑËÝÏ ×É ÍÁ¤ÔÅ ÖÏÒÓÔËÉÊ ÄÉÓË ÔÉÐÕ SCSI.\n"
-"\n"
-"\"îÏÍÅÒ ÖÏÒÓËÏÇÏ ÄÉÓËÕ\" - ÃÅ ÚÁ×ÖÄÉ Ì¦ÔÅÒÁ ЦÓÌÑ \"hd\" ÞÉ \"sd\". äÌÑ\n"
-"ÄÉÓË¦× ÔÉÐÕ IDE ÃÅ:\n"
-"\n"
-" * \"a\" - ÇÏÌÏ×ÎÉÊ ÄÉÓË (master) ÎÁ ÐÅÒÛÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
-"\n"
-" * \"b\" - ×ÔÏÒÉÎÎÉÊ (slave) ÄÉÓË ÎÁ ÐÅÒÛÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
-"\n"
-" * \"c\" - ÇÏÌÏ×ÎÉÊ ÄÉÓË ÎÁ ÄÒÕÇÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
-"\n"
-" * \"d\" - ×ÔÏÒÉÎÎÉÊ ÄÉÓË ÎÁ ÄÒÕÇÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE.\n"
-"\n"
-"äÌÑ SCSI ÄÉÓË¦× \"a\" ÏÚÎÁÞÁ¤ \"ÇÏÌÏ×ÎÉÊ ÄÉÓË\", \"b\" - ÄÒÕÇÏÒÑÄÎÉÊ ÄÉÓË, "
-"¦\n"
-"Ô.Ä. ..."
+#: ../../install_any.pm:1
+#, c-format
+msgid "Can't use broadcast with no NIS domain"
+msgstr "îÅ ÍÏÖÕ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÔÒÁÎÓÌÑæÀ ÂÅÚ NIS ÄÏÍÅÎÕ"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
+msgid "Removing printer \"%s\"..."
+msgstr "óÔÉÒÁÀ ÐÒÉÎÔÅÒ \"%s\" ..."
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "drakfloppy"
+msgstr "drakfloppy"
+
+#: ../../standalone/drakpxe:1
+#, c-format
msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
-msgstr ""
-"GNU/Linux - ÂÁÇÁÔÏËÏÒÉÓÔÕ×ÁÃØËÁ ÓÉÓÔÅÍÁ, ¦ ÃÅ ÏÚÎÁÞÁ¤, ÝÏ ËÏÖÅÎ Ú\n"
-"ËÏÒÉÓÔÕ×ÁÞ¦× ÍÏÖÅ ÍÁÔÉ Ó×ϧ ×ÌÁÓΦ ÕÓÔÁÎÏ×ËÉ, ×ÌÁÓΦ ÆÁÊÌÉ, ÔÏÝÏ. ýÏÂ\n"
-"¦ÌØÛŠĦÚÎÁÔÉÓÑ ÐÒÏ ÃÅ ÷É ÍÏÖÅÔÅ ÐÒÏÞÉÔÁÔÉ ð¦ÄÒÕÞÎÉË ËÏÒÉÓÔÕ×ÁÞÁ Ú\n"
-"ÓÉÓÔÅÍÉ. áÌÅ ÎÁ צÄͦÎÕ ×¦Ä ËÏÒÉÓÔÕ×ÁÞÁ Root, ÑËÉÊ ¤ ÁÄͦΦÓÔÒÁÔÏÒÏÍ\n"
-"ÓÉÓÔÅÍÉ, ËÏÒÉÓÔÕ×ÁÞ¦, ÑËÉÈ ÷É ÂÕÄÅÔÅ ÓÔ×ÏÒÀ×ÁÔÉ ÎÁ ÃØÏÍÕ ËÒÏæ, ÎÅ\n"
-"ÍÁÀÔØ ÐÒÁ×Á ÚͦÎÀ×ÁÔÉ Î¦ÞÏÇÏ × ÓÉÓÔÅͦ ËÒ¦Í Ó×Ï§È ×ÌÁÓÎÉÈ ÆÁÊÌ¦× ¦\n"
-"×ÌÁÓÎϧ ËÏÎƦ­ÕÒÁæ§. ÷É ÍÁ¤ÔÅ ÓÔ×ÏÒÉÔÉ ÒÁÈÕÎÏË ÄÌÑ ÈÏÞÁ  ÏÄÎÏÇÏ\n"
-"¤ÄÉÎÏÇÏ ËÏÒÉÓÔÕ×ÁÞÁ - ÄÌÑ ÓÁÍÏÇÏ ÓÅÂÅ. ÷É ÂÕÄÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÃÉÍ\n"
-"ÒÁÈÕÎËÏÍ ÄÌÑ ÔÏÇÏ, ÝÏ ×ÉËÏÎÕ×ÁÔÉ ÝÏÄÅÎΦ ÚÁÄÁÞ¦. ¶ ÈÏÞÁ ÃÅ ¦ ÄÕÖÅ\n"
-"ÚÒÕÞÎÏ ÒŤÓÔÒÕ×ÁÔÉÓØ × ÓÉÓÔÅͦ ÑË Root, ÁÌÅ ÏÄÎÏÞÁÓÎÏ ÃÅ ¦ ÄÕÖÅ\n"
-"ÎÅÂÅÚÐÅÞÎÏ! îÁÊÍÅÎÛÁ ÐÏÍÉÌËÁ ÍÏÖÅ ÐÒÉÚ×ÅÓÔÉ ÄÏ ÔÏÇÏ, ÝÏ ÓÉÓÔÅÍÁ ÂÕÄÅ\n"
-"ÎÅÒÏÂÏÞÏÀ. ñËÝÏ ÷É ÐÏÍÉÌÉÔÅÓØ ÑË Ú×ÉÞÁÊÎÉÊ ËÏÒÉÓÔÕ×ÁÞ, ÷É ÍÏÖÅÔÅ,\n"
-"Ú×ÉÞÁÊÎÏ, ×ÔÒÁÔÉÔÉ ÄÅÑ˦ Ó×ϧ ÄÁΦ, ÁÌÅ ÎÅ ×ÓÀ ÓÉÓÔÅÍÕ.\n"
-"\n"
-"óÐÏÞÁÔËÕ ÎÁÄÒÕËÕÊÔÅ Ó×Ϥ ÐÏ×ÎÅ ¦Í'Ñ. ãÅ ÎÅ ÏÂÏ×'ÑÚËÏ×Ï, ÷É ÍÏÖÅÔÅ\n"
-"ÎÁÄÒÕËÕ×ÁÔÉ ×ÓÅ, ÝÏ ÚÁ×ÇÏÄÎÏ. drakx ÐÏÔ¦Í ×¦ÚØÍÅ ÐÅÒÛÅ ÓÌÏ×Ï ¦\n"
-"×ÉËÏÒÉÓÔÁ¤ ÊÏÇÏ ÑË ¦Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ. ãÅ - ¦Í'Ñ Ð¦Ä ÑËÉÍ ËÏÒÉÓÔÕ×ÁÞ\n"
-"ÂÕÄÅ ÒŤÓÔÒÕ×ÁÔÉÓØ Õ ÓÉÓÔÅͦ. ÷É ÍÏÖÅÔÅ ÚͦÎÉÔÉ ÃÅ ¦Í'Ñ. ðÏÔ¦Í ÷É\n"
-"ÍÁ¤ÔÅ ××ÅÓÔÉ ÐÁÒÏÌØ. ðÁÒÏÌØ Ú×ÉÞÁÊÎÏÇÏ (ÎÅ root) ËÏÒÉÓÔÕ×ÁÞÁ ÎÅ ÔÁËÁ\n"
-"ËÒÉÔÉÞÎÁ Ò¦Þ, ÑË ÐÁÒÏÌØ ÁÄͦΦÓÔÒÁÔÏÒÁ, ÁÌÅ ×ÓÅ-ÏÄÎÏ ÎÅÍÁ¤ ÐÒÉÞÉÎ ÄÌÑ\n"
-"ÔÏÇÏ, ÝÏ ÎÅÈÔÕ×ÁÔÉ ÎÉÍ. ÷ÒÅÛÔ¦-ÒÅÛÔ, ÃÅ ÚÁÇÒÏÖÕ¤ ÷ÁÛÉÍ ×ÌÁÓÎÉÍ\n"
-"ÆÁÊÌÁÍ. \n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
-"ð¦ÓÌÑ ÔÏÇÏ, ÑË ÷É ÎÁÔÉÓÎÅÔÅ ÎÁ ËÎÏÐËÕ ðÒÉÊÎÑÔÉ ËÏÒÉÓÔÕ×ÁÞÁ, ÷É ÍÏÖÅÔÅ\n"
-"ÓÔ×ÏÒÉÔÉ ÝÅ ÂÁÇÁÔÏ ¦ÎÛÉÈ ËÏÒÉÓÔÕ×ÁÞ¦×. óÔ×ÏÒ¦ÔØ ÒÁÈÕÎËÉ ÄÌÑ ËÏÖÎÏÇÏ Ú\n"
-"÷ÁÛÉÈ ÄÒÕÚ¦×, ÄÌÑ ÔÁÔÁ Ê ÓÅÓÔÒÉ, ÎÁÐÒÉËÌÁÄ. ð¦ÓÌÑ ÔÏÇÏ, ÑË ÓÔ×ÏÒÅÎÏ\n"
-"×Ó¦ ÐÏÔÒ¦ÂΦ ÒÁÈÕÎËÉ ËÏÒÉÓÔÕ×ÁÞ¦×, ÎÁÔÉÓΦÔØ ËÌÁצÛÕ úÁ˦ÎÞÅÎÏ.\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"ñËÝÏ ÷É ÎÁÔÉÓÎÅÔÅ ÎÁ ËÎÏÐËÕ äÏÄÁÔËÏ×Ï, ÷É ÂÕÄÅÔÅ ÍÁÔÉ ÍÏÖÌÉצÓÔØ\n"
-"×ÓÔÁÎÏ×ÉÔÉ ËÏÍÁÎÄÎÕ ÏÂÏÌÏÎËÕ ÄÁÎÏÇÏ ËÏÒÉÓÔÕ×ÁÞÁ (ÎÅÑ×ÎÏ ×ÓÔÁÎÏ×ÌÀ¤ÔØÓÑ\n"
-"bash). "
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
msgstr ""
-"ðÅÒÛ, Î¦Ö ¦ÔÉ ÄÁ̦, ÷É ÍÁ¤ÔÅ ÐÒÏÞÉÔÁÔÉ Õ×ÁÖÎÏ ÕÍÏ×É Ì¦ÃÅÎÚ¦§. ÷ÏÎÁ\n"
-"ÓÔÏÓÕ¤ÔØÓÑ ×ÓØÏÇÏ ÄÉÓÔÒÕÂÕÔÉ×Õ íÁÎÄÒÅÊË ì¦ÎÁËÓ, ¦, ÑËÝÏ ÷É ÎÅ\n"
-"ÐÏÇÏÄÖÕ¤ÔÅÓØ Ú ÕÍÏ×ÁÍÉ Ì¦ÃÅÎÚ¦§, ÎÁÔÉÓΦÔØ ËÎÏÐËÕ ÷¦ÄÍÏ×ÉÔÉÓØ. ãÅ ÔÏÇÏ\n"
-"Ö ÞÁÓÕ ×¦ÄͦÎÉÔØ ÕÓÔÁÎÏ×ËÕ ÓÉÓÔÅÍÉ. äÌÑ ÐÒÏÄÏ×ÖÅÎÎÑ ÕÓÔÁÎÏ×ËÉ\n"
-"ÎÁÔÉÓΦÔØ ËÎÏÐËÕ ðÏÇÏÄÉÔÉÓØ."
-#: ../../install2.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You must also format %s"
+msgid "information level that can be obtained through the cpuid instruction"
msgstr ""
-#: ../../install2.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
+msgid "Peru"
+msgstr "ðÅÒÕ"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " on device: %s"
+msgstr "óÐÅæÁÌØÎÉÊ ÐÒÉÓÔÒ¦Ê ÍÉÛ¦: %s\n"
+
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"óÔÁÌÁÓÑ ÐÏÍÉÌËÁ - ÎÅ ÚÎÁÊÄÅÎÏ ×¦ÄÐÏצÄÎÉÈ ÄÉÓË¦× ÄÌÑ ÓÔ×ÏÒÅÎÎÑ ÎÏ×ÉÈÆÁÊÌÏ×ÉÈ "
-"ÓÉÓÔÅÍ. ðÅÒÅצÒÔÅ ÂÕÄØ-ÌÁÓËÁ Ó×ÏÀ ÓÉÓÔÅÍÕ ¦ ÓÐÒÏÂÕÊÔÅצÄÛÕËÁÔÉ ÐÒÉÞÉÎÕ ÃØÏÇÏ."
+msgid "Remove Windows(TM)"
+msgstr "óÔÅÒÔÉ Windows(TM)"
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Error reading file %s"
-msgstr "ðÏÍÉÌËÁ ÐÒÉ ÞÉÔÁÎΦ ÆÁÊÌÁ %s"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr ""
+"óÔÁÒÔÕ¤ ÔÁ ÚÕÐÉÎѤ ÓÅÒ×ÅÒ ÛÒÉÆÔ¦× ÄÌÑ X (ÏÂÏ×'ÑÚËÏ×Å ÄÌÑ ÒÏÂÏÔÉ\n"
+"ÓÅÒ×ÅÒÁ XFree)."
-#: ../../install_any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-"äÌÑ ÔÏÇÏ, ÝÏ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÚÁÐÉÓÁΦ ×ÉÂÒÁΦ ÐÁËÅÔÉ, ÚÁ×ÁÎÔÁÖÔÅ\n"
-"ÓÉÓÔÅÍÕ Ú ``linux defcfg=floppy''"
-#: ../../install_any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "ãÑ ÄÉÓËÅÔÁ ΊצÄÆÏÒÍÁÔÏ×ÁÎÁ ÑË FAT"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr ""
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "÷ÓÔÁ×ÔÅ ÄÉÓËÅÔÕ ×¦ÄÆÏÒÍÁÔÏ×ÁÎÕ Õ FAT × ÄÉÓËÏ×¦Ä %s"
+msgid "Madagascar"
+msgstr "íÁÄÁÇÁÓËÁÒ"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr "îÅ ÍÏÖÕ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÔÒÁÎÓÌÑæÀ ÂÅÚ NIS ÄÏÍÅÎÕ"
+msgid "Urpmi"
+msgstr ""
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
+msgid "Cron not available yet as non-root"
msgstr ""
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "No"
-msgstr "î¦"
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "System"
+msgstr "óÉÓÔÅÍÎÉÊ ÒÅÖÉÍ"
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
+#, fuzzy, c-format
+msgid "Do you want to use this feature?"
+msgstr "þÉ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ aboot?"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Yes"
-msgstr "ôÁË"
+msgid "Arabic"
+msgstr ""
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"÷É ×ÉÂÒÁÌÉ ÔÁ˦(ÉÊ) ÓÅÒ×ÅÒ(É): %s\n"
-"\n"
-"㦠ÓÅÒ×ÅÒÉ ÓÔÁÎÄÁÒÔÎÏ ÁËÔÉצÚÏ×ÁΦ. äÌÑ ÎÉÈ ÎÅצÄÏͦ ΦÑ˦ ÐÒÏÂÌÅÍÉ Ú\n"
-"ÂÅÚÐÅËÏÀ, ÁÌÅ ÄÅÑ˦ ÍÏÖÕÔØ ÂÕÔÉ ×ÉÑ×ÌÅΦ. ÷ ÔÁËÏÍÕ ×ÉÐÁÄËÕ ×É ÐÏ×ÉÎΦ\n"
-"ÑËÏÍÏÇÁ Û×ÉÄÛÅ ÐÏÎÏ×ÉÔÉ ×ÅÒÓ¦§ ÃÉÈ ÓÅÒ×ÅÒ¦×. \n"
"\n"
-"÷É ÈÏÞÅÔÅ ÄÏÚ×ÏÌÉÔÉ ÕÓÔÁÎÏ×ËÕ ÃÉÈ ÓÅÒ×ÅÒ¦×?\n"
+"- Options:\n"
+msgstr "ðÁÒÁÍÅÔÒÉ"
-#: ../../install_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "System configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ¦ÎÔÅÒÎÅÔÕ"
+msgid "Password required"
+msgstr "ðÁÒÏÌØ"
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System installation"
-msgstr "õÓÔÁÎÏ×ËÁ SILO"
+#: ../../common.pm:1
+#, c-format
+msgid "%d minutes"
+msgstr "%d È×ÉÌÉÎ"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Bringing down the network"
-msgstr "÷ÉÍÉËÁÀ ÍÅÒÅÖÕ"
+msgid "Graphics card: %s"
+msgstr "÷¦ÄÅÏ ÐÌÁÔÁ: %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bringing up the network"
-msgstr "÷ÍÉËÁÀ ÍÅÒÅÖÕ"
+msgid "WebDAV transfer failed!"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "òÏÚÂÉÔÔÑ ÎÁ ЦÄÒÏÚĦÌÉ ÎÅ×ÄÁÌÅ: %s"
+msgid "XFree configuration"
+msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ XFree"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "ðÏͦÞÎÉË ÒÏÚÂÉ×ËÉ ÎÁ ЦÄÒÏÚĦÌÉ DrakX ÚÎÁÊÛÏ× ÔÁ˦ ÍÏÖÌÉצ Ò¦ÛÅÎÎÑ:"
+msgid "Choose action"
+msgstr "÷ÉÂÅÒ¦ÔØ Ä¦À"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "îÅ ÍÏÖÕ ÚÎÁÊÔÉ ×¦ÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ ÄÌÑ ÕÓÔÁÎÏ×ËÉ"
+msgid "French Polynesia"
+msgstr "æÒÁÎÃÕÚØËÁ ðÏ̦ÎÅÚ¦Ñ"
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-"ôÅÐÅÒ ×É ÍÏÖÅÔÅ ÒÏÚÂÉÔÉ ÎÁ ЦÄÒÏÚĦÌÉ ÷ÁÛ ÄÉÓË %s.\n"
-"ð¦ÓÌÑ ÔÏÇÏ, ÑË ×É ÚÁ˦ÎÞÉÔÅ ÎÅ ÚÁÂÕÄØÔÅ ×ÉËÏÎÁÔÉ ËÏÍÁÎÄÕ `w'"
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use fdisk"
-msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ fdisk"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "ð¦ÄÔÒÉÍËÁ ÄÌÑ OKI 4w ¦ ÐÏĦÂÎÉÈ win ÐÒÉÎÔÅÒ¦×."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "óÐÅæÁÌØÎÉÊ ÒÏÚÐÏÄ¦Ì ÄÉÓËÕ"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "úÁÐÕÓË Ú×ÕËÏ×ϧ ÓÉÓÔÅÍÉ ALSA (Advanced Linux Sound Architecture)"
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "÷ó¶ ¦ÓÎÕÀÞ¦ ЦÄÒÏÚĦÌÉ ÔÁ ×Ó¦ ÄÁΦ ÎÁ ÄÉÓËÕ %s ÂÕÄÕÔØ ×ÔÒÁÞÅΦ"
+msgid "Installing driver for %s card %s"
+msgstr "÷ÓÔÁÎÏ×ÌÀÀ ÄÒÁÊ×ÅÒ ÄÌÑ %s ÐÌÁÔÉ %s"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "õ ÷ÁÓ Â¦ÌØÛÅ ÏÄÎÏÇÏ ÄÉÓËÕ. îÁ ÑËÉÊ Ú ÎÉÈ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ì¦ÎÁËÓ?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
+"÷É ÐÅÒÅÎÅÓÌÉ ÷ÁÛ ËÏÌÉÛÎ¦Ê ÏÓÎÏ×ÎÉÊ ÐÒÉÎÔÅÒ (\"%s\"). úÒÏÂÉÔÉ ÔÁË, ÝÏÂ\n"
+"ÃÅÊ ÐÒÉÎÔÅÒ ÚÁÌÉÛÁ×ÓÑ ÏÓÎÏ×ÎÉÍ ¦ × ÎÏ×¦Ê ÓÉÓÔÅͦ ÄÒÕËÕ %s?"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Erase entire disk"
-msgstr "óÔÅÒÔÉ ×ÅÓØ ÄÉÓË"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Enable Server"
+msgstr "âÁÚÁ ÄÁÎÉÈ"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "óÔÅÒÔÉ Windows(TM)"
-
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"îÅÍÁ¤ ЦÄÒÏÚĦÌÕ FAT ÄÌÑ ÚͦÎÉ ÒÏÚͦÒÕ ÁÂÏ ÄÌÑ ×ÉËÏÒÉÓÔÁÎÎÑ ÑË ÐÒÉÓÔÒ¦Ê "
-"Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ (ÁÂÏ ÎÅ ×ÉÓÔÁÞÁ¤ צÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ)"
+msgid "Ukrainian"
+msgstr "õËÒÁ§ÎÓØËÁ"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "á×ÔÏÍÁÔÉÞÎÁ ÚͦÎÁ ÒÏÚͦÒÕ FAT ÎÅ ÓÐÒÁÃÀ×ÁÌÁ: %s"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "÷ÓÔÁ×ÔÅ ÓÉÓÔÅÍÎÕ ÄÉÓËÅÔÕ, ÑËÁ ×ÖÉ×ÁÌÁÓÑ × ÄÉÓËÏ×ÏĦ %s"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Resizing Windows partition"
-msgstr "ïÂÞÉÓÌÀÀ ÍÅÖ¦ ЦÄÒÏÚĦÌÕ Windows"
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local network(s)"
+msgstr "ÎÅ ÚÎÁÊÄÅÎÁ ÐÌÁÔÁ ÍÅÒÅÖ¦"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Resizing"
-msgstr "úͦÎÀÀ ÒÏÚͦÒ"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "óÔÅÒÔÉ Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "partition %s"
-msgstr "ЦÄÒÏÚÄ¦Ì %s"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "ñËÉÊ ÒÏÚÍ¦Ò ×É ÈÏÞÅÔÅ ÚÁÌÉÛÉÔÉ ÄÌÑ Windows?"
+msgid "Firewire controllers"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"WARNING!\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-"õ÷áçá!\n"
+"LILO (the LInux LOader - ÚÁ×ÁÎÔÁÖÕ×ÁÞ ì¦ÎÁËÓÁ) ÔÁ Grub -- ÃÅ\n"
+"ÚÁ×ÁÎÔÁÖÕ×ÁÞ¦ ÓÉÓÔÅÍÉ: ×ÏÎÉ ÍÏÖÕÔØ ÚÁ×ÁÎÔÁÖÉÔÉ ÁÂÏ GNU/ì¦ÎÁËÓ ÁÂÏ\n"
+"ÂÕÄØ-ÑËÕ ¦ÎÛÕ ÏÐÅÒÁæÊÎÕ ÓÉÓÔÅÍÕ ÎÁ ÷ÁÛÏÍÕ ËÏÍÐ'ÀÔÅÒ¦. úÁ ÎÏÒÍÁÌØÎÉÈ\n"
+"ÕÍÏ× Ã¦ ÏÐÅÒÁæÊΦ ÓÉÓÔÅÍÉ ×¦ÒÎÏ ×ÉÚÎÁÞÁÀÔØÓÑ ÔÁ ×ÓÔÁÎÏ×ÌÀÀÔØÓÑ. ñËÝÏ\n"
+"ÃÅ ÎÅ ÔÁË, ×É ÍÏÖÅÔÅ ÄÏÄÁÔÉ ÐÏÔÒ¦ÂÎÉÊ ÐÕÎËÔ ÓÁÍÏÓÔ¦ÊÎÏ. õ×ÁÖÎÏ\n"
+"×ÉÂÅÒ¦ÔØ ÐÏÔÒ¦ÂΦ ÐÁÒÁÍÅÔÒÉ.\n"
"\n"
-"úÁÒÁÚ DrakX ÐÏÔÒ¦ÂÎÏ ÚͦÎÉÔÉ ÒÏÚÍ¦Ò Ð¦ÄÒÏÚĦÌÕ ¦Ú Windows. ïÂÅÒÅÖÎÏ:\n"
-"ÃÑ ÏÐÅÒÁÃ¦Ñ ÎÅÂÅÚÐÅÞÎÁ. ñËÝÏ ×É ÝÅ ÃØÏÇÏ ÎÅ ÚÒÏÂÉÌÉ, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ\n"
-"ÚÁÒÁÚ ÐÒÉÐÉÎÉÔÕ ÕÓÔÁÎÏ×ËÕ, ÓËÏÒÉÓÔÁÔÉÓÑ ÐÒÏÇÒÁÍÏÀ scandisk Ú Windows\n"
-"(Á ËÒ¦Í ÔÏÇÏ, ÍÏÖÌÉ×Ï, ÔÁËÏÖ ÄÅÆÒÁÇÍÅÎÔÕ×ÁÔÉ Ð¦ÄÒÏÚÄ¦Ì ÚÁ ÄÏÐÏÍÏÇÏÀ\n"
-"defrag) ÎÁ ÃØÏÍÕ Ð¦ÄÒÏÚĦ̦ ÔÁ ÚÒÏÂÉÔÉ ÒÅÚÅÒ×ÎÕ ËÏЦÀ ÷ÁÛÉÈ ÄÁÎÉÈ.\n"
-"ëÏÌÉ ×ÓÅ ÃÅ ÚÒÏÂÌÅÎÏ - ÎÁÔÉÓΦÔØ çÁÒÁÚÄ."
+"\n"
+"÷É, ÍÏÖÌÉ×Ï, ÔÁËÏÖ ÚÁÈÏÞÅÔÅ ÚÁËÒÉÔÉ ÄÏÓÔÕÐ ÄÏ ÃÉÈ ÏÐÅÒÁæÊÎÉÈ ÓÉÓÔÅÍ\n"
+"¦ÎÛÉÍ, × ÃØÏÍÕ ×ÉÐÁÄËÕ ×É ÍÏÖÅÔÅ ÓÔÅÒÔÉ ×¦ÄÐÏצÄΦ ÐÕÎËÔÉ × ÆÁÊ̦\n"
+"ËÏÎƦ­ÕÒÁæ§. áÌÅ × ÃØÏÍÕ ×ÉÐÁÄËÕ ÷ÁÍ ÐÏÔÒ¦ÂÎÁ ÂÕÄÅ ÓÐÅæÁÌØÎÁ\n"
+"ÄÉÓËÅÔÁ, ÝÏ ÚÁ×ÁÎÔÁÖÉÔÉ Ã¦ ÓÉÓÔÅÍÉ!"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
+msgid "System mode"
+msgstr "óÉÓÔÅÍÎÉÊ ÒÅÖÉÍ"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
-"ð¦ÄÒÏÚÄ¦Ì Ú Windows ÎÁ ÷ÁÛÏÍÕ ËÏÍÐ'ÀÔÅÒ¦ ÚÁÎÁÄÔÏ\n"
-"ÆÒÁ­ÍÅÎÔÏ×ÁÎÉÊ. ÷ÉËÏÎÁÊÔÅ ÄÅ-ÆÒÁ­ÍÅÎÔÁæÀ \n"
-"ÓÐÏÞÁÔËÕ (ËÏÍÁÎÄÁ ``defarg'')."
+"äÌÑ ÔÏÇÏ, ÝÏ ÄÒÕËÕ×ÁÔÉ ÎÁ NetWare ÐÒÉÎÔ-ÓÅÒ×ÅÒ¦, ÷É ÐÏ×ÉÎΦ\n"
+"×ËÁÚÁÔÉ ÎÁÚ×Õ ÐÒÉÎÔ-ÓÅÒ×ÅÒÁ (úÁÕ×ÁÖÔÅ! ×ÏÎÁ ÍÏÖŠצÄÒ¦ÚÎÑÔÉÓÑ ×¦Ä\n"
+"TCP/IP ¦ÍÅΦ ÈÏÓÔÁ!) ÒÁÚÏÍ Ú ÎÁÚ×ÏÀ ÐÒÉÎÔÅÒÁ, ÑËÉÍ ÷É ÈÏÞÅÔÅ\n"
+"ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÔÁ צÄÐÏצÄÎÉÍ ¦ÍÅÎÅÍ ËÏÒÉÓÔÕ×ÁÞÁ Ú ÐÁÒÏÌÅÍ."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ×¦ÌØÎÉÊ ÐÒÏÓÔ¦Ò ÎÁ ЦÄÒÏÚĦ̦ Windows"
+msgid "Netmask:"
+msgstr "íÁÓËÁ ÍÅÒÅÖ¦"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "Append"
+msgstr "ðÒɤÄÎÁÔÉ"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
+"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
-"ðÒÏÇÒÁÍÁ ÚͦÎÉ ÒÏÚͦÒÕ Ð¦ÄÒÏÚĦÌÕ FAT ÎÅ ÍÏÖÅ ÐÒÁÃÀ×ÁÔÉ Ú ÷ÁÛÉÍ\n"
-"ЦÄÒÏÚĦÌÏÍ, ÐÒÉ ÒÏÂÏÔ¦ ÓÔÁÌÁÓÑ ÔÁËÁ ÐÏÍÉÌËÁ: %s"
-#: ../../install_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "òÏÚÍ¦Ò ÑËÏÇÏ Ð¦ÄÒÏÚĦÌÕ ×É ÈÏÞÅÔÅ ÚͦÎÉÔÉ?"
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
+"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ×¦ÌØÎÉÊ ÐÒÏÓÔ¦Ò ÎÁ ЦÄÒÏÚĦ̦ Windows"
+msgid ""
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
+msgstr ""
+"ñËÝÏ ÐÏÔÒ¦ÂÎÏ, Á×ÔÏÍÁÔÉÚÏ×ÁÎÁ ÕÓÔÁÎÏ×ËÁ ÍÏÖÅ ÂÕÔÉ ÐÏ×ΦÓÔÀ\n"
+"Á×ÔÏÍÁÔÉÞÎÏ. ÷ ÃØÏÍÕ ×ÉÐÁÄËÕ ÕÓÔÁÎÏ×ËÁ ÂÕÄÅ ÍÁÔÉ ÐÏ×ÎÉÊ ËÏÎÔÒÏÌØ ÎÁÄ\n"
+"×ÁÛÉÍ ÄÉÓËÏÍ!! (ôÁËÉÊ ÔÉÐ ÕÓÔÁÎÏ×ËÉ × ÏÓÎÏ×ÎÏÍÕ Ð¦ÄÈÏÄÉÔØ ÄÌÑ\n"
+"ÕÓÔÁÎÏ×ËÉ ÎÁ ¦ÎÛ¦Ê ÓÉÓÔÅͦ)\n"
+"\n"
+"íÏÖÌÉ×Ï ×É ÚÁÈÏÞÅÔÅ ÐÏ×ÔÏÒÉÔÉ ÕÓÔÁÎÏ×ËÕ.\n"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"îÅÍÁ¤ ЦÄÒÏÚĦÌÕ FAT ÄÌÑ ÚͦÎÉ ÒÏÚͦÒÕ ÁÂÏ ÄÌÑ ×ÉËÏÒÉÓÔÁÎÎÑ ÑË ÐÒÉÓÔÒ¦Ê "
-"Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ (ÁÂÏ ÎÅ ×ÉÓÔÁÞÁ¤ צÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ)"
+msgid "Network printer \"%s\", port %s"
+msgstr "ðÒÉÎÔÅÒ × ÍÅÒÅÖ¦ (ÓÏËÅÔ)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "òÏÚÍ¦Ò Ð¦ÄÒÏÚĦÌÕ ÄÌÑ Ó×ÏЦÎÇÕ × íÂ: "
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr ""
+"÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÑËÉÊ ÁÄÁÐÔÅÒ ÍÅÒÅÖ¦ ÂÕÄŠЦÄËÌÀÞÅÎÏ ÄÏ ÌÏËÁÌØÎϧ\n"
+"ÍÅÒÅÖ¦."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "òÏÚÍ¦Ò Ð¦ÄÒÏÚĦÌÕ root × íÂ:"
+msgid "OK to restore the other files."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Please choose your keyboard layout."
+msgstr "ñËÁ Õ ÷ÁÓ ÒÏÚËÌÁÄËÁ ËÌÁצÁÔÕÒÉ?"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the sizes"
-msgstr "÷ÉÂÅÒ¦ÔØ ÒÏÚͦÒÉ"
+msgid "Printer Device URI"
+msgstr "URI ÐÒÉÓÔÒÏÀ ÐÒÉÎÔÅÒÁ"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "ñËÉÊ Ð¦ÄÒÏÚÄ¦Ì ×É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÁÔÉ ÄÌÑ Linux4Win?"
+msgid "Not erasable media!"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ Ð¦ÄÒÏÚÄ¦Ì Windows ÄÌÑ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ"
+msgid "Terminal-based"
+msgstr "þÅÒÅÚ ÔÅÒͦÎÁÌ"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "îÅÍÁ¤ ¦ÓÎÕÀÞÉÈ Ð¦ÄÒÏÚÄ¦Ì¦× ÄÌÑ ×ÉËÏÒÉÓÔÁÎÎÑ"
+msgid "Installing a printing system in the %s security level"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "The user name is too long"
+msgstr "ãÅ ¦Í'Ñ ×ÖÅ ÚÁÊÎÑÔÅ"
+
+#: ../../any.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ ¦ÓÎÕÀÞÉÍ Ð¦ÄÒÏÚĦÌÏÍ"
+msgid "Other OS (windows...)"
+msgstr "¶ÎÛ¦ ÓÉÓÔÅÍÉ (windows...)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "îÅÄÏÓÔÁÔÎØÏ ×¦ÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ ÄÌÑ ÎÏ×ÉÈ Ð¦ÄÒÏÚĦ̦×"
+msgid "WebDAV remote site already in sync!"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use free space"
-msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ×¦ÌØÎÉÊ ÐÒÏÓÔ¦Ò"
+msgid "Reading printer database..."
+msgstr "þÉÔÁÀ ÄÁΦ ÐÒÉÎÔÅÒ¦× ..."
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "÷É ÐÏ×ÉÎΦ ÍÁÔÉ FAT ЦÄÒÏÚÄ¦Ì ÚÍÏÎÔÏ×ÁÎÉÊ × /boot/efi "
+msgid "Generate auto install floppy"
+msgstr "óÔ×ÏÒÅÎÎÑ Á×ÔÏÕÓÔÁÎÏ×ÏÞÎϧ ÄÉÓËÅÔÉ"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"÷É ÎÅ ÍÁ¤ÔŠЦÄÒÏÚĦÌÕ ÄÌÑ Ó×ÏЦÎÇÕ\n"
-"\n"
-"÷ÓÅ-ÔÁËÉ ÐÒÏÄÏ×ÖÕ×ÁÔÉ? "
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"÷É ÐÏ×ÉÎΦ ÍÁÔÉ Ð¦ÄÒÏÚÄ¦Ì root.\n"
-"äÌÑ ÃØÏÇÏ ÓÔ×ÏÒ¦ÔØ ÎÏ×ÉÊ Ð¦ÄÒÏÚÄ¦Ì (ÁÂÏ ËÌÁÃΦÔØ ÎÁ ×ÖÅ\n"
-"¦ÓÎÕÀÞÏÍÕ). ð¦ÓÌÑ ÃØÏÇÏ ×ÉÂÅÒ¦ÔØ ``ôÏÞËÁ ÍÏÎÔÕ×ÁÎÎÑ'' ¦ ×ÓÔÁÎÏצÔØ §§\n"
-"× `/'"
+msgid "Somalia"
+msgstr "óÏÍÁ̦"
-#: ../../install_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+msgid "No open source driver"
msgstr ""
-"äÅÑ˦ Ú ÁÐÁÒÁÔÎÉÈ ÚÁÓÏÂ¦× ÎÁ ÷ÁÛÏÍÕ ËÏÍÐ'ÀÔÅÒ¦ ×ÉÍÁÇÁÀÔØ ÄÒÁÊ×ÅÒ¦×\n"
-"ƦÒÍ-×ÉÇÏÔÏ×ÌÀ×ÁÞ¦× ÄÌÑ ÔÏÇÏ, ÝÏ ÐÒÁÃÀ×ÁÔÉ ×¦ÒÎÏ. \n"
-"\n"
-"÷É ÍÏÖÅÔÅ ÚÎÁÊÔÉ ÐÏÔÒ¦ÂÎÕ ¦ÎÆÏÒÍÁæÀ ÐÒÏ ÎÉÈ ÎÁ: %s"
-#: ../../install_messages.pm:1
-#, c-format
+#: ../../security/level.pm:1
+#, fuzzy, c-format
msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
msgstr ""
-"÷¦ÔÁÎÎÑ, ÕÓÔÁÎÏ×ËÁ ÚÁ˦ÎÞÅÎÁ. ÷ÉÊͦÔØ Ú ÄÉÓËÏ×ÏÄ¦× ÚÁ×ÁÎÔÁÖÕ×ÁÌØΦ\n"
-"ÎÏÓ¦§ ¦ ÐÏÔ¦Í ÎÁÔÉÓΦÔØ Return ÄÌÑ ÐÅÒÅ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ.\n"
-"\n"
-"\n"
-"äÌÑ ¦ÎÆÏÒÍÁæ§ ÐÒÏ ×ÉÐÒÁ×ÌÅΦ ÐÏÍÉÌËÉ ÚÎÁÊÄÅΦ × ÃÍÊ ×ÅÒÓ¦§\n"
-"Mandrake Linux Ú×ÅÒΦÔØÓÑ ÄÏ ÒÏÚĦÌÕ Errata ÎÁ ÓÅÒ×ÅÒ¦\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"äÏצÄËÉ ÐÒÏ ËÏÎƦÇÕÒÁæÀ ÷ÁÛϧ ÓÉÓÔÅÍÉ ÐÒÉ×ÅÄÅΦ × ÐÏÓÔ-ÕÓÔÁÎÏ×ÏÞÎÏÍÕ\n"
-"ÒÏÚĦ̦ ïƦæÊÎÏÇÏ ëÅÒ¦×ÎÉÃÔ×Á ëÏÒÉÓÔÕ×ÁÞÁ Mandrake Linux."
+"íÉ ×ÍÉËÁ¤ÍÏ 4 Ò¦×ÅÎØ ÂÅÚÐÅËÉ, ÁÌÅ ÔÅÐÅÒ ÓÉÓÔÅÍÁ ¤ ÐÏ×ΦÓÔÀ ÚÁËÒÉÔÏÀ.\n"
+"÷Ó¦ ÒÅÖÉÍÉ ÂÅÚÐÅËÉ ÔÅÐÅÒ ÎÁ ÎÁÊ×ÉÝÏÍÕ Ò¦×Φ."
-#: ../../install_messages.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr ""
+msgid "Nicaragua"
+msgstr "î¦ËÁÒÁÇÕÁ"
-#: ../../install_messages.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"âÕÄØ ÌÁÓËÁ, Õ×ÁÖÎÏ ÐÒÏÞÉÔÁÊÔÅ ÕÍÏ×É ÐÏÄÁΦ ÄÁ̦. ñËÝÏ ×É ÎÅ\n"
-"ÐÏÇÏÄÖÕ¤ÔÅÓØ Ú ÂÕÄØ-ÑËÏÀ ÞÁÓÔÉÎÏÀ, ×ÁÍ ÎÅ ÄÏÚ×ÏÌѤÔØÓÑ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ\n"
-"ÎÁÓÔÕÐÎÉÊ ËÏÍÐÁËÔ-ÄÉÓË. îÁÔÉÓΦÔØ ÎÁ ÷¦ÄÍÏ×ÉÔÉÓÑ ÄÌÑ ÔÏÇÏ, ÝÏÂ\n"
-"ÐÒÏÄÏ×ÖÉÔÉ ÕÓÔÁÎÏ×ËÕ ÂÅÚ ×ÉËÏÒÉÓÔÁÎÎÑ ÃØÏÇÏ ÎÏÓ¦Ñ.\n"
-"\n"
-"äÅÑ˦ ËÏÍÐÏÎÅÎÔÉ ÎÁ ÎÁÓÔÕÐÎÏÍÕ ËÏÍÐÁËÔ-ÄÉÓËÕ ÎÅ ËÅÒÕÀÔØÓÑ Ì¦ÃÅÎÚ¦¤À\n"
-"GPL ÞÉ ÐÏĦÂÎÏÀ ÄÏ Îŧ. ÷ ÔÁËÏÍÕ ×ÉÐÁÄËÕ ËÏÖÅÎ ¦Ú ËÏÍÐÏÎÅÎÔ¦×\n"
-"ËÅÒÕ¤ÔØÓÑ Ó×ϤÀ ÓÐÅÃÉƦÞÎÏÀ ̦ÃÅÎÚ¦¤À. âÕÄØ ÌÁÓËÁ, ÐÒÏÞÉÔÁÊÔÅ Õ×ÁÖÎÏ ¦\n"
-"ÄÏÔÒÉÍÕÊÔÅÓØ ÕÍÏ× ÔÁËϧ ÓÐÅÃÉƦÞÎϧ ̦ÃÅÎÚ¦§ ÐÅÒÛ, Î¦Ö ËÏÒÉÓÔÕ×ÁÔÉÓÑ\n"
-"ÁÂÏ ÐÅÒÅÒÏÚÐÏ×ÓÀÄÖÕ×ÁÔÉ ÔÁËÕ ËÏÍÐÏÎÅÎÔÕ. ôÁ˦ ̦ÃÅÎÚ¦§ Õ Â¦ÌØÛÏÓÔ¦\n"
-"×ÉÐÁÄË¦× ÚÁÂÏÒÏÎÑÀÔØ ÐÅÒÅÄÁÞÕ, ËÏЦÀ×ÁÎÎÑ (ËÒ¦Í ÓÔ×ÏÒÅÎÎÑ ÒÅÚÅÒ×Îϧ\n"
-"ËÏЦ§), ÐÅÒÅÒÏÚÐÏ×ÓÀÄÖÅÎÎÑ, Ú×ÏÒÏÔÎÀ ¦ÎÖÅÎÅÒ¦À, ÄÅ-ÁÓÅÍÂÌÀ×ÁÎÎÑ,\n"
-"ÄÅ-ËÏÍЦÌÑæÀ ÞÉ ÍÏÄÉƦËÁæÀ ËÏÍÐÏÎÅÎÔÉ. âÕÄØ-ÑËÅ ÐÏÒÕÛÅÎÎÑ Ì¦ÃÅÎÚ¦§\n"
-"ÎÅÇÁÊÎÏ ÐÒÉÐÉÎѤ ×ÁÛ¦ ÐÒÁ×Á ÝÏÄÏ ËÏÍÐÏÎÅÎÔÉ. ñËÝÏ ÓÐÅÃÉƦÞÎÏ ÎÅ\n"
-"×ËÁÚÁÎÏ ÐÒÏ ÎÁÄÁÎÎÑ ÔÁËÉÈ ÐÒÁ×, ×É ÎÅ ÍÁ¤ÔÅ ÐÒÁ×Á ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ Ã¦\n"
-"ÐÒÏÇÒÁÍÉ ÎÁ ¦ÌØÛ, Î¦Ö ÏÄÎ¦Ê ÓÉÓÔÅͦ, ÁÂÏ ÐÒÉÓÔÏÓÏ×Õ×ÁÔÉ §È ÄÌÑ\n"
-"ÕÓÔÁÎÏ×ËÉ × ÍÅÒÅÖ¦. ñËÝÏ ×É ÍÁ¤ÔÅ ÓÕÍΦ×É ÝÏÄÏ Ì¦ÃÅÎÚ¦§, Ú×ÅÒΦÔØÓÑ\n"
-"ÂÅÚÐÏÓÅÒÅÄÎØÏ ÄÏ ÄÉÓÔÒÉÂ'ÀÔÏÒÁ ÞÉ ÒÅÄÁËÔÏÒÁ ÔÁËϧ ËÏÍÐÏÎÅÎÔÉ. ðÅÒÅÄÁÞÁ\n"
-"ÔÁËÉÈ ËÏÍÐÏÎÅÎÔ (×ËÌÀÞÁÀÞÉ ÄÏËÕÍÅÎÔÁæÀ) ÔÒÅÔ¦Í ÏÓÏÂÁÍ Õ Â¦ÌØÛÏÓÔ¦\n"
-"×ÉÐÁÄË¦× ÚÁÂÏÒÏÎÅÎÁ. \n"
-"\n"
-"÷Ó¦ Á×ÔÏÒÓØ˦ ÐÒÁ×Á ËÏÍÐÏÎÅÎÔ ÎÁ ÎÁÓÔÕÐÎÏÍÕ ËÏÍÐÁËÔ-ÄÉÓËÕ ÚÁÓÔÅÒÅÖÅΦ\n"
-"ÚÁ §È צÄÐÏצÄÎÉÍÉ Á×ÔÏÒÁÍÉ ¦ ÚÁÈÉÝÁÀÔØÓÑ ÚÁËÏÎÁÍÉ ÐÒÏ ÏÈÏÒÏÎÕ\n"
-"Á×ÔÏÒÓØËÉÈ ÐÒÁ×, Ñ˦ ÍÁÀÔØ ÐÒÁ×Ï ÚÁÓÔÏÓÏ×Õ×ÁÔÉÓÑ ÄÏ ÐÒÏÇÒÁÍÎÉÈ\n"
-"ÐÒÏÄÕËÔ¦×.\n"
+msgid "New Caledonia"
+msgstr "îÏ×Á ëÁÌÅÄÏΦÑ"
-#: ../../install_messages.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-"÷ÓÔÕÐ\n"
-"\n"
-"ïÐÅÒÁæÊÎÁ ÓÉÓÔÅÍÁ ÔÁ Ò¦ÚÎÏÍÁΦÔΦ ËÏÍÐÏÎÅÎÔÉ, ÝÏ ÍÁÀÔØÓÑ ×\n"
-"ÄÉÓÔÒÉÂÕÔÉצ ì¦ÎÁËÓ íÁÎÄÒÅÊË ÎÁÄÁ̦ ÍÁÀÔØ Ú×ÁÔÉÓÑ \"ðÒÏÇÒÁÍΦ\n"
-"ÐÒÏÄÕËÔÉ\". ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ×ËÌÀÞÁÀÔØ ÁÌÅ ÎÅ ÏÂÍÅÖÕÀÔØÓÑ ÎÁÂÏÒÁÍÉ\n"
-"ÐÒÏÇÒÁÍ, ÍÅÔÏÄ¦× ÐÒÁ×ÉÌ ÔÁ ÄÏËÕÍÅÎÔÁæ¤À, ÑËÁ ÍÁ¤ צÄÎÏÛÅÎÎÑ ÄÏ\n"
-"ÏÐÅÒÁæÊÎϧ ÓÉÓÔÅÍÉ ÔÁ Ò¦ÚÎÏÍÁΦÔÎÉÈ ÓËÌÁÄÏ×ÉÈ ÞÁÓÔÉÎ ÄÉÓÔÒÉÂÕÔÉ×Á\n"
-"ì¦ÎÁËÓ íÁÎÄÒÅÊËÁ.\n"
-"\n"
-"1. ì¦ÃÅÎÚ¦ÊÎÁ ÕÇÏÄÁ\n"
-"\n"
-"âÕÄØ ÌÁÓËÁ, ÐÒÏÞÉÔÁÊÔÅ ÃÀ ÕÇÏÄÕ Õ×ÁÖÎÏ. ãÅÊ ÄÏËÕÍÅÎÔ ¤ ̦ÃÅÎÚ¦ÊÎÏÀ\n"
-"ÕÇÏÄÏÀ Í¦Ö ÷ÁÍÉ ÔÁ MandrakeSoft S.A., ÑËÁ ÓÔÏÓÕ¤ÔØÓÑ ÐÒÏÇÒÁÍÎÉÈ\n"
-"ÐÒÏÄÕËÔ¦×. ÷ÓÔÁÎÏ×ÌÅÎÎÑÍ, ÄÕÂÌÀ×ÁÎÎÑÍ ÞÉ ×ÉËÏÒÉÓÔÁÎÎÑÍ ðÒÏÇÒÁÍÎÉÈ\n"
-"ÐÒÏÄÕËÔ¦× ÂÕÄØ-ÑËÉÍ ÞÉÎÏÍ, ÷É ÔÉÍ ÓÁÍÉÍ Ñ×ÎÏ ÐÒÉÊÍÁ¤ÔÅ ÎÁ ÐÏ×ΦÓÔÀ\n"
-"ÐÏÇÏÄÖÕ¤ÔÅÓØ Ú ÕÍÏ×ÁÍÉ ÄÁÎϧ ì¦ÃÅÎÚ¦§. ñËÝÏ ÷É ÎÅ ÐÏÇÏÄÖÕ¤ÔÅÓØ Ú\n"
-"ÂÕÄØ-ÑËÏÀ ÞÁÓÔÉÎÏÀ ì¦ÃÅÎÚ¦ÊÎϧ ÕÇÏÄÉ, ÷ÁÍ ÎÅ ÄÏÚ×ÏÌѤÔØÓÑ\n"
-"×ÓÔÁÎÏ×ÌÀ×ÁÔÉ, ÄÕÂÌÀ×ÁÔÉ ÞÉ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ðÒÏÇÒÁÍÎÉÍ\n"
-"ÐÒÏÄÕËÔÏÍ. âÕÄØ-ÑËÁ ÓÐÒÏÂÁ ×ÓÔÁÎÏ×ÌÅÎÎÑ, ÄÕÂÌÀ×ÁÎÎÑ ÞÉ ×ÉËÏÒÉÓÔÁÎÎÑ\n"
-"ðÒÏÇÒÁÍÎÏÇÏ ÐÒÏÄÕËÔÕ ÞÉÎÏÍ, ÑËÉÊ ÎŠצÄÐÏצÄÁ¤ ÕÍÏ×ÁÍ õÇÏÄÉ ×ÉÚÎÁ¤ÔØÓÑ\n"
-"ÐÏÒÕÛÅÎÎÑÍ õÇÏÄÉ ¦, ÔÉÍ ÓÁÍÉÍ ÷É ÐÏÚÂÁ×ÌѤÔÅÓØ ÐÒÁ× ÚÁ æ¤À\n"
-"õÇÏÄÏÀ. ð¦ÓÌÑ ÐÒÉÐÉÎÅÎÎÑ Ä¦§ 椧 õÇÏÄÉ, ÷É ÐÏ×ÉÎΦ ÎÅÇÁÊÎÏ ÚÎÉÝÉÔÉ\n"
-"×Ó¦ ËÏЦ§ ðÒÏÇÒÁÍÎÉÈ ðÒÏÄÕËÔ¦×.\n"
-"\n"
-"2. ïÂÍÅÖÅÎÁ ÇÁÒÁÎÔ¦Ñ\n"
-"\n"
-"ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ÔÁ ÄÏÐÏ×ÎÀÀÞÁ ÄÏËÕÍÅÎÔÁÃ¦Ñ ÐÏÓÔÁ×ÌÑÀÔØÓÑ \"ÑË ¤\",\n"
-"ÂÅÚ ÇÁÒÁÎÔ¦§, × ÍÅÖÁÈ ×ÓÔÁÎÏ×ÌÅÎÉÈ ÚÁËÏÎÏÄÁ×ÓÔ×ÏÍ. î¦ ÚÁ ÑËÉÈ ÕÍÏ×\n"
-"MandrakeSoft S.A. ÎÅ ÂÕÄÅ ÎÅÓÔÉ ×¦ÄÐÏצÄÁÌØÎÏÓÔ¦, × ÍÅÖÁÈ ×ÓÔÁÎÏ×ÌÅÎÉÈ\n"
-"ÚÁËÏÎÏÄÁ×ÓÔ×ÏÍ, ÚÁ ×ÉÐÁÄËÏצ, ÐÒÑͦ ÞÉ ÏÐÏÓÅÒÅÄËÏ×ÁΦ ( ×ËÌÀÞÁÀÞÉ ÁÌÅ\n"
-"ÎÅ ÏÂÍÅÖÕÀÞÉÓØ ×ÔÒÁÔÁÍÉ ÞÉ ÐÅÒÅÐÉÎÁÍÉ Â¦ÚÎÅÓÕ, ƦÎÁÎÓÏ×ÉÍÉ ×ÔÒÁÔÁÍÉ,\n"
-"ÁÄ×ÏËÁÔÓØËÉÍÉ ×ÉÔÒÁÔÁÍÉ ÞÉ ÛÔÒÁÆÁÍÉ, ÑË ÒÅÚÕÌØÔÁÔ ÐÒÉÓÕÄÕ ÓÕÄÏ×ϧ\n"
-"¦ÎÓÔÁÎæ§, ÞÉ ÂÕÄØ-Ñ˦ ¦ÎÛ¦ ×ÔÒÁÔÉ), ÝÏ ÐÏÈÏÄÑÔØ ×¦Ä ×ÉËÏÒÉÓÔÁÎÎÑ,\n"
-"ÁÂÏ, ÎÁ×ÐÁËÉ, ×¦Ä ÎÅÍÏÖÌÉ×ÏÓÔ¦ ×ÉËÏÒÉÓÔÁÎÎÑ ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ, ÎÁצÔØ\n"
-"Õ ×ÉÐÁÄËÕ, ÑËÝÏ MandrakeSoft S.A. ÐÏצÄÏÍÌÑÌÏÓÑ ÐÒÏ ÍÏÖÌÉ×ÏÓÔ¦ ÔÁËÉÈ\n"
-"×ÔÒÁÔ.\n"
-"\n"
-"ïâíåöåîîñ ÷¶äðï÷¶äáìøîïóô¶, úáìåöîï· ÷¶ä ïâìáäáîîñ áâï ÷éëïòéóôáîîñ\n"
-"úáâïòïîåîéè ðòïçòáíîéè ðòïäõëô¶÷ ÷ äåñëéè ëòá·îáè\n"
-"\n"
-"÷ ÍÅÖÁÈ ×ÓÔÁÎÏ×ÌÅÎÉÈ ÚÁËÏÎÏÄÁ×ÓÔ×ÏÍ, MandrakeSoft S.A. ÞÉ ÊÏÇÏ\n"
-"ÄÉÓÔÒÉÂÀÔÏÒÉ Î¦ ÚÁ ÑËÉÈ ÕÍÏ× ÎÅ ÎÅÓÕÔØ ×¦ÄÐÏצÄÁÌØÎÏÓÔ¦ ÚÁ ÖÏÄÎÅ\n"
-"ÎÁ×ÍÉÓÎÅ, ×ÉÐÁÄËÏ×Å, ÐÒÑÍÅ ÞÉ ÏÐÏÓÅÒÅÄËÏ×ÁÎÅ ÐÏÛËÏÄÖÅÎÎÑ, (×ËÌÀÞÁÀÞÉ\n"
-"ÁÌÅ ÎÅ ÏÂÍÅÖÕÀÞÉÓØ ÐÅÒÅÛËÏÄÁÍÉ ÄÌÑ Â¦ÚÎÅÓÕ, ÐÒÉÐÉÎÅÎÎÑÍ Â¦ÚÎÅÓÕ,\n"
-"ƦÎÁÎÓÏ×ÉÍÉ ×ÔÒÁÔÁÍÉ, ÁÄ×ÏËÁÔÓØËÉÍÉ ×ÉÔÒÁÔÁÍÉ ÞÉ ÛÔÒÁÆÁÍÉ, ÑË\n"
-"ÒÅÚÕÌØÔÁÔ ÐÒÉÓÕÄÕ ÓÕÄÏ×ϧ ¦ÎÓÔÁÎæ§, ÞÉ ÂÕÄØ-ÑËÉÍÉ ¦ÎÛÉÍ ×ÔÒÁÔÁÍÉ),\n"
-"Ñ˦ ×ÉÎÉËÁÀÔØ ×¦Ä ÏÂÌÁÄÁÎÎÑ ÞÉ ×ÉËÏÒÉÓÔÁÎÎÑ ÐÒÏÇÒÁÍÎÉÈ ËÏÍÐÏÎÅÎÔ ÞÉ\n"
-"×ÉÎÉËÁÀÔØ ×¦Ä ÚÁ×ÁÎÔÁÖÅÎÎÑ ÚÁÂÏÒÏÎÅÎÉÈ ÚÁËÏÎÏÄÁ×ÓÔ×ÏÍ ÞÉ ÏÂÍÅÖÅÎÉÈ ÄÏ\n"
-"×ÉËÏÒÉÓÔÁÎÎÑ × ÄÅÑËÉÈ ËÒÁ§ÎÁÈ ÐÒÏÇÒÁÍÎÉÈ ËÏÍÐÏÎÅÎÔ ÐÏ ÍÅÒÅÖ¦ Ú ÏÄΦ¤§\n"
-"Ú ÄÏÍÁÛÎ¦È ÓÔÏÒ¦ÎÏË ì¦ÎÁËÓ íÁÎÄÒÅÊË. ãÑ ÏÂÍÅÖÅÎÁ צÄÐÏצÄÁÌØΦÓÔØ\n"
-"×ËÌÀÞÁ¤ ÔÁËÏÖ (ÁÌÅ ÎÅ ÏÂÍÅÖÕ¤ÔØÓÑ) ÔÁË Ú×ÁÎÉÍÉ ÓÉÌØÎÉÍÉ\n"
-"ËÒÉÐÔÏÇÒÁƦÞÎÉÍÉ ÍÅÔÏÄÁÍÉ, Ñ˦ ×ËÌÀÞÅΦ × ðÒÏÇÒÁÍÎÉÊ ÐÒÏÄÕËÔ.\n"
-"\n"
-"3. ì¦ÃÅÎÚ¦Ñ GPL ÔÁ ÐÏĦÂΦ\n"
-"\n"
-"ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ÓËÌÁÄÁÀÔØÓÑ Ú ËÏÍÐÏÎÅÎÔ, ÒÏÚÒÏÂÌÅÎÉÈ Ò¦ÚÎÉÍÉ\n"
-"ƦÚÉÞÎÉÍÉ ÞÉ ÀÒÉÄÉÞÎÉÍÉ ÏÓÏÂÁÍÉ. â¦ÌØÛ¦ÓÔØ ËÏÍÐÏÎÅÎÔ ËÅÒÕÀÔØÓÑ\n"
-"ÔÅÒͦÎÁÍÉ ÔÁ ÕÍÏ×ÁÍÉ ÚÁÇÁÌØÎϧ ÐÕÂ̦ÞÎϧ ̦ÃÅÎÚ¦§ GNU (GNU General\n"
-"Public Licence), ÑËÕ ÍÉ ÎÁÄÁ̦ ÂÕÄÅÍÏ ÎÁÚÉ×ÁÔÉ × ÄÁÎÏÍÕ ÄÏËÕÍÅÎÔ¦ GPL,\n"
-"ÁÂÏ ÐÏĦÂÎÉÍÉ ÄÏ ÄÁÎϧ ̦ÃÅÎÚ¦ÑÍÉ. â¦ÌØÛ¦ÓÔØ ÔÁËÉÈ Ì¦ÃÅÎÚ¦Ê â¦ÌØÛ¦ÓÔØ\n"
-"Ú ÃÉÈ Ì¦ÃÅÎÚ¦Ê ÄÏÚ×ÏÌÑÀÔØ ×ÉËÏÒÉÓÔÁÎÎÑ, ÄÕÂÌÀ×ÁÎÎÑ, ÐÒÉÊÎÑÔÔÑ ÔÁ\n"
-"ÐÅÒÅÒÏÚÐÏ×ÓÀÄÖÅÎÎÑ ÓËÌÁÄÏ×ÉÈ ÞÁÓÔÉÎ, Ñ˦ ×ÏÎÉ ÒÅÇÕÌÀÀÔØ. âÕÄØ-ÌÁÓËÁ,\n"
-"ÏÚÎÁÊÏÍÔÅÓØ Õ×ÁÖÎÏ Ú ÔÅÒͦÎÁÍÉ ÔÁ ÕÍÏ×ÁÍÉ Ì¦ÃÅÎÚ¦ÊÎÉÈ ÕÍÏ× ÄÌÑ ËÏÖÎϧ\n"
-"ÓËÌÁÄÏ×ϧ ÞÁÓÔÉÎÉ ÐÅÒÛ, Î¦Ö ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÂÕÄØ-ÑËÕ Ú\n"
-"ÞÁÓÔÉÎ. âÕÄØ-Ñ˦ ÚÁÐÉÔÁÎÎÑ ÓÔÏÓÏ×ÎÏ Ì¦ÃÅÎÚ¦§ ÎÁ ÏËÒÅÍÕ ÓËÌÁÄÏ×Õ\n"
-"ÞÁÓÔÉÎÕ ÍÁÀÔØ ÁÄÒÅÓÕ×ÁÔÉÓÑ Á×ÔÏÒÕ Ã¦¤§ ÓËÌÁÄÏ×ϧ ÞÁÓÔÉÎÉ, Á ÎÅ ÄÏ\n"
-"MandrakeSoft. ðÒÏÇÒÁÍÉ, ÒÏÚÒÏÂÌÅΦ MandrakeSoft S.A. ËÅÒÕÀÔØÓÑ\n"
-"̦ÃÅÎÚ¦¤À GPL. äÏËÕÍÅÎÔÁæÑ, ÒÏÚÒÏÂÌÅÎÁ MandrakeSoft S.A. ËÅÒÕ¤ÔØÓÑ\n"
-"ÓÐÅæÁÌØÎÏÀ ̦ÃÅÎÚ¦¤À. ú×ÅÒΦÔØÓÑ, ÂÕÄØ-ÌÁÓËÁ, ÄÏ ÄÏËÕÍÅÎÔÁæ§ ÚÁ\n"
-"ÐÏÄÒÏÂÉÃÑÍÉ.\n"
-"\n"
-"4. ðÒÁ×Á ¦ÎÔÅÌÅËÔÕÁÌØÎϧ ×ÌÁÓÎÏÓÔ¦\n"
-"\n"
-"÷Ó¦ ÐÒÁ×Á ÎÁ ÓËÌÁÄÏצ ËÏÍÐÏÎÅÎÔÉ ðÒÏÇÒÁÍÎÉÈ ÐÒÏÄÕËÔ¦× ÎÁÌÅÖÁÔØ\n"
-"צÄÐÏצÄÎÉÍ Á×ÔÏÒÁÍ ¦ ÚÁÈÉÝÅΦ ÚÁËÏÎÁÍÉ ÐÒÏ ¦ÎÔÅÌÅËÔÕÁÌØÎÕ ×ÌÁÓΦÓÔØ\n"
-"ÔÁ ÐÒÁ×Á ÎÁ ËÏЦÀ×ÁÎÎÑ, Ñ˦ ÍÁÀÔØ ÚÁÓÔÏÓÕ×ÁÎÎÑ ÄÏ ÐÒÏÇÒÁÍÎÏÇÏ\n"
-"ÚÁÂÅÚÐÅÞÅÎÎÑ. MandrakeSoft S.A. ÚÁÌÉÛÁ¤ ÚÁ ÓÏÂÏÀ ÐÒÁ×Ï ÚͦÎÀ×ÁÔÉ ÞÉ\n"
-"ÁÄÁÐÔÕ×ÁÔÉ ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ÑË × Ã¦ÌÏÍÕ, ÔÁË ¦ ÏËÒÅÍÉÍÉ ÞÁÓÔÉÎÁÍÉ Ú\n"
-"ÂÕÄØ-ÑËÏÀ ÍÅÔÏÀ ¦ ÄÌÑ ÂÕÄØ-ÑËÉÈ Ã¦ÌÅÊ. \"Mandrake\", \"Mandrake Linux\" ÔÁ\n"
-"צÄÐÏצÄΦ ÌÏÇÏÔÉÐÉ ¤ ÔÏÒǦ×ÅÌØÎÉÍÉ ÍÁÒËÁÍÉ MandarakeSoft S.A.\n"
-"\n"
-"5. úÁËÏÎÏÄÁ×ÓÔ×Ï\n"
-"\n"
-"ñËÝÏ ÂÕÄØ-ÑËÉÊ ÒÏÚÄ¦Ì Ã¦¤§ ÕÇÏÄÉ ÐÒÉÚÎÁÎÉÊ ÎÅĦÊÓÎÉÍ, ÔÁËÉÍ, ÝÏ ÎÅ\n"
-"צÄÐÏצÄÁ¤ ÚÁËÏÎÏÄÁ×ÓÔ×Õ ÞÉ ÎÅצÄÐÏצÄÎÉÍ ÝÏÄÏ ÓÕÄÏ×ϧ ÐÏÓÔÁÎÏ×É, ÃÅÊ\n"
-"ÒÏÚÄ¦Ì ÕÇÏÄÉ ×ÉÄÁÌѤÔØÓÑ Ú ÄÁÎÏÇÏ ËÏÎÔÒÁËÔÕ. ÷É ÚÁÌÉÛÁ¤ÔÅÓØ Ú×'ÑÚÁÎÉÍÉ\n"
-"¦ÎÛÉÍÉ ÓÅËæÑÍÉ Ã¦¤§ ÕÇÏÄÉ, Ñ˦ ÝÅ ÍÁÀÔØ ÚÁÓÔÏÓÕ×ÁÎÎÑ. ôÅÒͦÎÉ ÔÁ\n"
-"ÕÍÏ×É Ã¦¤§ ì¦ÃÅÎÚ¦§ ËÅÒÕÀÔØÓÑ úÁËÏÎÏÄÁ×ÓÔ×ÏÍ æÒÁÎæ§. ÷Ó¦ ÓЦÒΦ\n"
-"ÐÉÔÁÎÎÑ ÝÏÄÏ ÔÅÒÍ¦Î¦× ÔÁ ÕÍÏ× Ã¦¤§ ̦ÃÅÎÚ¦§ ÂÕÄÕÔØ ÒÏÚ×'ÑÚÕ×ÁÔÉÓÑ ÐÏ\n"
-"ÍÏÖÌÉ×ÏÓÔ¦ ÐÏÚÁ ÍÅÖÁÍÉ ÓÕÄÏ×ÉÈ ÕÓÔÁÎÏ×. ÷ ËÒÁÊÎ¦È ×ÉÐÁÄËÁÈ ÓЦÒΦ\n"
-"ÐÉÔÁÎÎÑ ÂÕÄÕÔØ ×ÉÒ¦ÛÕ×ÁÔÉÓÑ ×¦ÄÐÏצÄÎÉÍ úÁËÏÎÎÉÍ óÕÄÏÍ ðÁÒÉÖÁ -\n"
-"æÒÁÎæÑ.\n"
-"\n"
-"ú ÂÕÄØ-ÑËÉÍÉ ÐÉÔÁÎÎÑÍÉ ÝÏÄÏ ÃØÏÇÏ ÄÏËÕÍÅÎÔÁ Ú×ÅÒÔÁÊÔÅÓÑ, ÂÕÄØ-ÌÁÓËÁ,\n"
-"ÄÏ MandrakeSoft S.A.\n"
+msgid "European protocol (EDSS1)"
+msgstr "´×ÒÏÐÅÊÓØËÉÊ ÐÒÏÔÏËÏÌØ (EDSS1)"
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Entering step `%s'\n"
-msgstr "ðÏÞÉÎÁ¤ÔØÓÑ ËÒÏË `%s'\n"
+msgid "Video mode"
+msgstr "÷¦ÄÅÏ ÒÅÖÉÍ"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Please enter your email address below "
+msgstr "âÕÄØ-ÌÁÓËÁ, ÓÐÒÏÂÕÊÔÅ ÝÅ ÒÁÚ"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Help"
-msgstr "äÏצÄËÁ"
+msgid "Oman"
+msgstr "ïÍÅÎ"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "not configured"
-msgstr "ÐÅÒÅÎÁÓÔÒϧÔÉ"
+msgid "Network Monitoring"
+msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Configure"
-msgstr "îÁÓÔÒϧÔÉ"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Go on anyway?"
-msgstr "÷ÓÅ-ÔÁËÉ ÐÒÏÄÏ×ÖÕ×ÁÔÉ?"
+msgid "New size in MB: "
+msgstr "îÏ×ÉÊ ÒÏÚÍ¦Ò (íÂ): "
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "There was an error installing packages:"
-msgstr "óÔÁÌÁÓÑ ÐÏÍÉÌËÁ Ð¦Ä ÞÁÓ ÕÓÔÁÎÏ×ËÉ ÐÁËÅÔ¦×: "
+msgid "Partition table type: %s\n"
+msgstr "ôÉÐ ÔÁÂÌÉæ ЦÄÒÏÚĦ̦×: %s\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Authentication Windows Domain"
+msgstr "á×ÔÅÎÔÉËÁÃ¦Ñ LDAP"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "There was an error ordering packages:"
-msgstr "óÔÁÌÁÓÑ ÐÏÍÉÌËÁ Ð¦Ä ÞÁÓ ÓÏÒÔÕ×ÁÎÎÑ ÐÁËÅÔ¦×: "
+msgid "US keyboard"
+msgstr "ëÌÁצÁÔÕÒÁ óûá"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+msgid "Buttons emulation"
+msgstr "åÍÕÌÑÃ¦Ñ ËÌÁצÛ"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ", network printer \"%s\", port %s"
msgstr ""
-"úͦΦÔØ ËÏÍÐÁËÔ-ÄÉÓË!\n"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
"\n"
-"âÕÄØ-ÌÁÓËÁ, ×ÓÔÁ×ÔÅ ËÏÍÐÁËÔ-ÄÉÓË, ÐÏÚÎÁÞÅÎÉÊ \"%s\" Õ ÐÒÉÓÔÒ¦Ê ¦\n"
-"ÎÁÔÉÓΦÔØ çÁÒÁÚÄ Ð¦ÓÌÑ ÃØÏÇÏ.\n"
+"Drakbackup activities via tape:\n"
"\n"
-"ñËÝÏ ×É ÎÅ ÍÁ¤ÔÅ ÔÁËÏÇÏ ÄÉÓËÕ, ÎÁÔÉÓΦÔØ ÷¦ÄͦÎÉÔÉ, ÝÏ ÎÅ\n"
-"×ÓÔÁÎÏ×ÌÀ×ÁÔÉ Ú ÃØÏÇÏ ÄÉÓËÕ."
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Refuse"
-msgstr "÷¦ÄËÉÎÕÔÉ"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Accept"
-msgstr "ðÒÉÊÎÑÔÉ"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Sending Speed:"
+msgstr "úÁÐÉÓÁÔÉ × ÆÁÊÌ"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Installing package %s"
-msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÕ %s"
+msgid "Halt bug"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Mail alert configuration"
+msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ¦ÎÔÅÒÎÅÔÕ"
+
+#: ../../lang.pm:1
#, c-format
-msgid "%d packages"
-msgstr "%d ÐÁËÅÔÉ"
+msgid "Tokelau"
+msgstr "ôÏËÅÌÁÕ"
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "No details"
-msgstr "ðÏÄÒÏÂÉæ"
+msgid "Bosnian"
+msgstr "åÓÔÏÎÓØËÁ"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Details"
-msgstr "ðÏÄÒÏÂÉæ"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Release: "
+msgstr "úÁÞÅËÁÊÔÅ, ÂÕÄØ-ÌÁÓËÁ"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "úÁÞÅËÁÊÔÅ, ¦ÄŠЦÄÇÏÔÏ×ËÁ ÕÓÔÁÎÏ×ËÉ"
+msgid "Connection speed"
+msgstr "û×ÉÄ˦ÓÔØ Ú×'ÑÚËÕ"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Time remaining "
-msgstr "úÁÌÉÛÏË ÞÁÓÕ "
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Estimating"
-msgstr "îÁÂÌÉÖÅÎÅ ÏÂÞÉÓÌÅÎÎÑ"
+msgid "Namibia"
+msgstr "îÁͦ¦Ñ"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Database Server"
+msgstr "âÁÚÁ ÄÁÎÉÈ"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Installing"
-msgstr "÷ÓÔÁÎÏ×ÌÀÀ"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "îÅ ÍÏÖÕ ÄÏÄÁÔÉ Ð¦ÄÒÏÚÄ¦Ì ÄÏ _ÆÏÒÍÁÔÏ×ÁÎÏÇÏ_ RAID md%d"
-#: ../../install_steps_gtk.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Minimal install"
-msgstr "í¦Î¦ÍÁÌØÎÁ ÕÓÔÁÎÏ×ËÁ"
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
+"ãÑ ×¦ÄÅÏÐÌÁÔÁ ÍÁ¤ ЦÄÔÒÉÍËÕ ÁÐÁÒÁÔÎÏÇÏ ÐÒÉÓËÏÒÅÎÎÑ ÔÒØÏÈ×ÉͦÒÎϧ\n"
+"ÇÒÁƦËÉ, ÁÌÅ Ô¦ÌØËÉ ÄÌÑ XFree %s, ÷¶äí¶ôøôå, ýï ãå åëóðåòéíåîôáìøîéê\n"
+"òåöéí, ñëéê íïöå ðòé÷åóôé äï úá÷éóáîîñ ÷áûïçï ëïíð'àôåòá. ÷ÁÛÁ ÐÌÁÔÁ\n"
+"ЦÄÔÒÉÍÕ¤ÔØÓÑ XFree %s, ÑËÉÊ ÍÁ¤ ËÒÁÝÕ Ð¦ÄÔÒÉÍËÕ Ä×Ï×ÉͦÒÎϧ ÇÒÁƦËÉ."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Please wait, setting security options..."
+msgstr "úÁÞÅËÁÊÔÅ, ¦ÄŠЦÄÇÏÔÏ×ËÁ ÕÓÔÁÎÏ×ËÉ"
+
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Updating package selection"
-msgstr "úÂÅÒÅÇÔÉ ×ÉÂ¦Ò ÐÁËÅÔ¦×"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "ðÒÏÞÉÔÁÔÉ/ÚÁÐÉÓÁÔÉ Ú/ÎÁ ÄÉÓËÅÔÕ"
+msgid "Launch the graphical environment when your system starts"
+msgstr "úÁÐÕÓËÁÔÉ ×¦ËÎÏ X-Window ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<- Previous"
-msgstr "<- ðÏÐÅÒÅÄΦÊ"
+msgid "hourly"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "õÓÔÁÎÏ×ËÁ"
+msgid " Successfuly Restored on %s "
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "ðÏËÁÚÕ×ÁÔÉ Á×ÔÏÍÁÔÉÞÎÏ ×ÉÂÒÁΦ ÐÁËÅÔÉ"
+msgid "Making printer port available for CUPS..."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "÷ÉÂ¦Ò ÃØÏÇÏ ÐÁËÅÔÕ ÎÅÍÏÖÌÉ×Ï ×¦ÄͦÎÉÔÉ. ÷¦Î ÐÏ×ÉÎÅÎ ÂÕÔÉ ÐÏÎÏ×ÌÅÎÉÊ."
+msgid "Antigua and Barbuda"
+msgstr "áÎÔÉÇÕÁ ÔÁ âÁÒÂÕÄÁ"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
-"ãÅÊ ÐÁËÅÔ ÐÏ×ÉÎÅÎ ÂÕÔÉ ÐÏÎÏ×ÌÅÎÉÊ\n"
-"÷É ÓÐÒÁ×Ħ ÈÏÞÅÔŠצÄͦÎÉÔÉ ÊÏÇÏ ×ɦÒ?"
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "÷ÉÂ¦Ò ÃØÏÇÏ ÐÁËÅÔÕ ÎÅÍÏÖÌÉ×Ï ×¦ÄͦÎÉÔÉ. êÏÇÏ ×ÖÅ ×ÓÔÁÎÏ×ÌÅÎÏ."
+msgid "Spanish"
+msgstr "¶ÓÐÁÎÓØËÁ"
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Start"
+msgstr "óÔÁÔÕÓ"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "ãÅÊ ÐÁËÅÔ ÎÅÏÂȦÄÎÉÊ. îÅ ÍÏÖÎÁ צÄͦÎÉÔÉ ÊÏÇÏ ×ɦÒ"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring applications..."
+msgstr "îÁÓÔÒÏÀÀ ÐÒÉÎÔÅÒ \"%s\"..."
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "You can't select/unselect this package"
-msgstr "îÅ ÍÏÖÎÁ ×ÉÂÒÁÔÉ ÁÂÏ ×¦ÄͦÎÉÔÉ ×ÉÂ¦Ò ÃØÏÇÏ ÐÁËÅÔÕ."
+msgid "Normal modem connection"
+msgstr "ú×ÉÞÁÊÎÅ Ú'¤ÄÎÁÎÎÑ ÐÏ ÍÏÄÅÍÕ"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "File Selection"
+msgstr "÷ÉÂ¦Ò ÐÁËÅÔ¦×"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "㦠ÐÁËÅÔÉ ÂÕÄÕÔØ ÄŦÎÓÔÁÌØÏ×ÁÎÉÍÉ"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
+"ñËÕ ËÏÎƦ­ÕÒÁæÀ ISDN ÷É ÂÁÖÁ¤ÔÅ ×ÓÔÁÎÏ×ÉÔÉ?\n"
+"\n"
+"* óÔÁÒÁ ËÏÎƦ­ÕÒÁÃ¦Ñ ×ÉËÏÒÉÓÔÕ×Õ¤ isdn4net. äÏÓÉÔØ ÐÏÔÕÖΦ ÚÁÓÏÂÉ\n"
+"×ÈÏÄÑÔØ ÄÏ ÓËÌÁÄÕ ÐÁËÅÔÕ, ÁÌÅ ÊÏÇÏ ÄÏÓÉÔØ ÓËÌÁÄÎÏ ÎÁÌÁÇÏÄÉÔÉ, ¦ צΠÎÅ\n"
+"¤ ÓÔÁÎÄÁÒÔÎÉÍ.\n"
+"\n"
+"* îÏ×Á ËÏÎƦ­ÕÒÁÃ¦Ñ ÐÒÏÓÔ¦ÛÁ ÄÌÑ ÒÏÚÕͦÎÎÑ, ¦ÌØÛ ÓÔÁÎÄÁÒÔÉÚÏ×ÁÎÁ, ÁÌÅ\n"
+"ÍÁ¤ ÍÅÎÛÅ ¦ÎÓÔÒÕÍÅÎÔÁÒ¦À.\n"
+"\n"
+"íÉ ÒÅËÏÍÅÎÄÕ¤ÍÏ ÐÒÏÓÔÕ ËÏÎƦ­ÕÒÁæÀ.\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "㦠ÐÁËÅÔÉ ÂÕÄÕÔØ ×ÓÔÁÎÏ×ÌÅÎÉÍÉ"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "÷ÉÂÒÁÔÉ ÃÅÊ ÐÁËÅÔ ÎÅÍÏÖÌÉ×Ï. äÌÑ ÊÏÇÏ ÕÓÔÁÎÏ×ËÉ ÎÅ ×ÉÓÔÁÞÁ¤ ͦÓÃÑ."
+msgid "Run config tool"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "÷ÁÖÌÉצÓÔØ: %s\n"
+msgid "Bootloader installation"
+msgstr "õÓÔÁÎÏ×ËÁ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "òÏÚͦÒ: %d ëâ\n"
+msgid "Root partition size in MB: "
+msgstr "òÏÚÍ¦Ò Ð¦ÄÒÏÚĦÌÕ root × íÂ:"
#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "÷ÅÒÓ¦Ñ: %s\n"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "ãÅÊ ÐÁËÅÔ ÎÅÏÂȦÄÎÉÊ. îÅ ÍÏÖÎÁ צÄͦÎÉÔÉ ÊÏÇÏ ×ɦÒ"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Name: %s\n"
-msgstr "îÁÚ×Á: %s\n"
+msgid "Etherboot ISO image is %s"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) - ÃÅ óÅÒ×ÅÒ îÁÚ× äÏÍÅÎ¦× (Domain Name Server, DNS), ÑËÉÊ\n"
+"ÓÌÕÖÉÔØ ÄÌÑ ×ÉÚÎÁÞÅÎÎÑ ÎÁÚ× ÈÏÓÔ¦× ÚÁ IP ÁÄÒÅÓÁÍÉ ÔÁ ÎÁ×ÐÁËÉ."
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Bad package"
-msgstr "ðÁËÅÔÉ ÎÅÒÏÂÏÞ¦"
+msgid "Disconnect..."
+msgstr "÷¦ÄËÌÀÞÅÎÎÑ..."
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other"
-msgstr "¶ÎÛ¦"
+msgid "Saint Lucia"
+msgstr "óÁÎÔÁ ìÀÞ¦Ñ"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Report"
+msgstr "ÐÏÒÔ"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "úÁÇÁÌØÎÉÊ ÒÏÚͦÒ: %d / %d í "
+msgid "Palau"
+msgstr "ðÁÌÁÕ"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Next ->"
-msgstr "äÁ̦ ->"
+msgid "level"
+msgstr "Ò¦×ÅÎØ"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Individual package selection"
-msgstr "¶ÎÄÉצÄÕÌØÎÉÊ ×ÉÂ¦Ò ÐÁËÅÔ¦×"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Package Group Selection"
msgstr "÷ÉÂ¦Ò ÇÒÕÐ ÐÁËÅÔ¦×"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
+msgid "Restore Via Network Protocol: %s"
msgstr ""
-"÷ÁÛÁ ÓÉÓÔÅÍÁ ÍÁ¤ ÚÁÍÁÌÏ ÒÅÓÕÒÓ¦×. ÷É ÍÏÖÅÔÅ ÍÁÔÉ ÐÒÏÂÌÅÍÉ Ú ÕÓÔÁÎÏ×ËÏÀ\n"
-"Mandrake ì¦ÎÁËÓÁ. ñËÝÏ ÃÅ ÓÔÁÎÅÔØÓÑ, ×É ÍÏÖÅÔÅ ÓÐÒÏÂÕ×ÁÔÉ ÕÓÔÁÎÏ×ËÕ ×\n"
-"ÔÅËÓÔÏ×ÏÍÕ ÒÅÖÉͦ. äÌÑ ÃØÏÇÏ Ð¦Ä ÞÁÓ ÚÁ×ÁÎÔÁÖÅÎÎÑ ËÏÍÐÁËÔ-ÄÉÓËÕ\n"
-"ÎÁÔÉÓΦÔØ F1 ¦ ÐÏÔ¦Í ××ÅĦÔØ \"text\"."
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "úÂÅÒÅÇÔÉ ×ÉÂ¦Ò ÐÁËÅÔ¦×"
+msgid "You can configure each parameter of the module here."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Automated"
-msgstr "á×ÔÏÍÁÔÉÚÏ×ÁÎÁ"
+msgid "Choose the resolution and the color depth"
+msgstr "÷ÉÂÅÒ¦ÔØ ÒÏÚĦÌØÎÕ ÚÄÁÔΦÓÔØ ÔÁ ˦ÌØ˦ÓÔØ ËÏÌØÏÒ¦×"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Replay"
-msgstr "ðÏ×ÔÏÒÉÔÉ"
+msgid "Emulate third button?"
+msgstr "¶Í¦ÔÕ×Á×ÁÔÉ ÔÒÉ ËÎÏÐËÉ?"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
msgstr ""
-"ñËÝÏ ÐÏÔÒ¦ÂÎÏ, Á×ÔÏÍÁÔÉÚÏ×ÁÎÁ ÕÓÔÁÎÏ×ËÁ ÍÏÖÅ ÂÕÔÉ ÐÏ×ΦÓÔÀ\n"
-"Á×ÔÏÍÁÔÉÞÎÏ. ÷ ÃØÏÍÕ ×ÉÐÁÄËÕ ÕÓÔÁÎÏ×ËÁ ÂÕÄÅ ÍÁÔÉ ÐÏ×ÎÉÊ ËÏÎÔÒÏÌØ ÎÁÄ\n"
-"×ÁÛÉÍ ÄÉÓËÏÍ!! (ôÁËÉÊ ÔÉÐ ÕÓÔÁÎÏ×ËÉ × ÏÓÎÏ×ÎÏÍÕ Ð¦ÄÈÏÄÉÔØ ÄÌÑ\n"
-"ÕÓÔÁÎÏ×ËÉ ÎÁ ¦ÎÛ¦Ê ÓÉÓÔÅͦ)\n"
-"\n"
-"íÏÖÌÉ×Ï ×É ÚÁÈÏÞÅÔÅ ÐÏ×ÔÏÒÉÔÉ ÕÓÔÁÎÏ×ËÕ.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Generate auto install floppy"
+msgid "Mount"
+msgstr "íÏÎÔÕ×ÁÔÉ"
+
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Creating auto install floppy"
msgstr "óÔ×ÏÒÅÎÎÑ Á×ÔÏÕÓÔÁÎÏ×ÏÞÎϧ ÄÉÓËÅÔÉ"
-#: ../../install_steps_interactive.pm:1
+#: ../../steps.pm:1
#, fuzzy, c-format
-msgid "Reboot"
-msgstr "Root"
+msgid "Install updates"
+msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
+msgid "text box height"
msgstr ""
-"äÅÑ˦ ËÒÏËÉ ÎÅ ÚÁ×ÅÒÛÅΦ.\n"
-"\n"
-"÷É Ä¦ÊÓÎÏ ÈÏÞÅÔÅ ÐÒÉÐÉÎÉÔÉ ÚÁÒÁÚ?"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "óÔ×ÏÒÅÎÎÑ Á×ÔÏÕÓÔÁÎÏ×ÏÞÎϧ ÄÉÓËÅÔÉ"
+msgid "State"
+msgstr "óÔÁÔÕÓ"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "÷ÓÔÁ×ÔÅ ÞÉÓÔÕ ÄÉÓËÅÔÕ × ÄÉÓËÏ×¦Ä %s"
+msgid "Be sure a media is present for the device %s"
+msgstr "ðÅÒÅÓצÄÞ¦ÔØÓÑ, ÝÏ ÎÏÓ¦Ê ×ÓÔÁ×ÌÅÎÉÊ × ÐÒÉ×¦Ä %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "Enable multiple profiles"
+msgstr "äÏÚ×ÏÌÉÔÉ ÂÁÇÁÔÏÐÒÏƦÌØΦÓÔØ"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
-"íÏÖÌÉ×Ï ×ÁÍ ÐÏÔÒ¦ÂÎÏ ÚͦÎÉÔÉ ÐÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÅÎÎÑ Õ Open Firmware ÄÌÑ\n"
-"ÔÏÇÏ, ÝÏ ÄÏÚ×ÏÌÉÔÉ ÒÏÂÏÔÕ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ. ñËÝÏ ×É ÎÅ ÂÁÞÉÔÅ ÚÁÐÒÏÛÅÎÎÑ\n"
-"ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ, ÎÁÔÉÓΦÔØ Command-Option-O-F\n"
-"ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ¦ ××ÅĦÔØ setenv boot-device %s,\\\\:tbxi. ð¦ÓÌÑ\n"
-"ÃØÏÇÏ ÎÁÄÒÕËÕÊÔÅ shut-down. ðÒÉ ÎÁÓÔÕÐÎÏÍÕ ÚÁ×ÁÎÔÁÖÅÎΦ ×É ÐÏÂÁÞÉÔÅ\n"
-"ЦÄËÁÚËÕ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ. "
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "õÓÔÁÎÏ×ËÁ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ ÎÅÕÓЦÛÎÁ. óÔÁÌÁÓÑ ÐÏÍÉÌËÁ:"
+msgid "Local printer"
+msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Installing bootloader"
-msgstr "÷ÓÔÁÎÏ×ÌÀÀ ÂÌÏË ÚÁ×ÁÎÔÁÖÅÎÎÑ"
+msgid "Files Restored..."
+msgstr ""
#: ../../install_steps_interactive.pm:1
#, c-format
+msgid "Package selection"
+msgstr "÷ÉÂ¦Ò ÐÁËÅÔ¦×"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Mauritania"
+msgstr "íÁ×ÒÉÔÁΦÑ"
+
+#: ../../standalone/drakgw:1
+#, c-format
msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
msgstr ""
-"ðÏÍÉÌËÁ ÐÒÉ ×ÓÔÁÎÏ×ÌÅÎΦ aboot,\n"
-"ÐÏÐÒÏÂÕ×ÁÔÉ ×ÓÔÁÎÏ×ÉÔÉ ÓÉÌÏÀ, ÎÁצÔØ ÑËÝÏ ÃÅ ÒÏÚÒÕÛÉÔØ ÐÅÒÛÉÊ Ð¦ÄÒÏÚĦÌ?"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "þÉ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ aboot?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
msgstr ""
-"úÄÁ¤ÔØÓÑ Õ ÷ÁÓ ÍÁÛÉÎÁ OldWorld ÞÉ îÅצÄÏÍÁ. úÁ×ÁÎÔÁÖÕ×ÁÞ yaboot ÎÅ\n"
-"ÂÕÄÅ ÐÒÁÃÀ×ÁÔÉ Ú Ã¦¤À ÍÁÛÉÎÏÀ. õÓÔÁÎÏ×ËÁ ÂÕÄÅ ÐÒÏÄÏ×ÖÕ×ÁÔÉÓØ, ÁÌÅ ÄÌÑ\n"
-"ÚÁ×ÁÎÔÁÖÅÎÎÑ, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ËÏÒÉÓÔÕ×ÁÔÉÓØ BootX."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Preparing bootloader..."
-msgstr "÷ÓÔÁÎÏ×ÌÀÀ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÉÊ ÂÌÏË"
+msgid "All primary partitions are used"
+msgstr "÷Ó¦ ÏÓÎÏ×Φ ЦÄÒÏÚĦÌÉ ÚÁÊÎÑÔ¦"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Domain Admin Password"
+msgid ""
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
+"ð¦ÓÌÑ ÔÏÇÏ, ÑË ÃÅ ÚÁ˦ÎÞÅÎÏ, ÂÁÖÁÎÏ ÐÅÒÅ×ÁÎÔÁÖÉÔÉ X ÓÅÒ×ÅÒ ÄÌÑ ÔÏÇÏ,\n"
+"ÝÏ ÐÏÚÂÕÔÉÓÑ ÐÒÏÂÌÅÍÉ ¦Ú ÚͦÎÏÀ ÎÁÚ×É ÈÏÓÔÁ."
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Domain Admin User Name"
-msgstr "îÁÚ×Á ÄÏÍÅÎÕ"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Windows Domain"
-msgstr "äÏÍÅÎ NIS"
+#: ../../services.pm:1
+#, c-format
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr ""
+"á×ÔÏÍÁÔÉÞÎÅ ×ÉÚÎÁÞÅÎÎÑ ÔÁ ËÏÎƦ­ÕÒÕ×ÁÎÎÑ ÁÐÁÒÁÔÎÏÇÏ ÚÁÂÅÚÐÅÞÅÎÎÑ ÐÒÉ\n"
+"ÚÁ×ÁÎÔÁÖÅÎΦ."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Authentication Windows Domain"
-msgstr "á×ÔÅÎÔÉËÁÃ¦Ñ LDAP"
+msgid "Installation Server Configuration"
+msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-msgstr ""
+msgid "Configuring IDE"
+msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ IDE"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Server"
-msgstr "óÅÒ×ÅÒ NIS"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Network functionality not configured"
+msgstr "íÏΦÔÏÒ ÎÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÉÊ"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Domain"
-msgstr "äÏÍÅÎ NIS"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Configure module"
+msgstr "óËÏÎƦÇÕÒÕÊÔÅ ÍÉÛÕ"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Authentication NIS"
-msgstr "NIS Á×ÔÅÎÔÉËÁæÑ"
+msgid "Cocos (Keeling) Islands"
+msgstr "ëÏËÏÓÏצ ÏÓÔÒÏ×É"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS"
-msgstr "NIS"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnecting from the Internet "
+msgstr "ú'¤ÄÎÁÔÉÓÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LDAP Server"
-msgstr "óÅÒ×ÅÒ LDAP"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "ýÏ ÚͦÎÉ ÐÏÞÁÌÉ Ä¦ÑÔÉ ÷ÁÍ ÓÌ¦Ä ÐÅÒÅ×ÁÎÔÁÖÉÔÉ ËÏÍÐ'ÀÔÅÒ"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "dn ÎÁ ÏÓÎÏצLDAP "
+msgid "Provider phone number"
+msgstr "îÏÍÅÒ ÔÅÌÅÆÏÎÕ ÐÒÏ×ÁÊÄÅÒÁ"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Host %s"
+msgstr "îÁÚ×Á ÈÏÓÔÁ"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "á×ÔÅÎÔÉËÁÃ¦Ñ LDAP"
+msgid "Armenia"
+msgstr "÷¦ÒÍÅΦÑ"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid "Fiji"
+msgstr "æ¦ÄÖ¦"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Local files"
-msgstr "ìÏËÁÌØΦ ÆÁÊÌÉ"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Authentication"
-msgstr "á×ÔÅÎÔÉËÁæÑ"
+msgid "Second floppy drive"
+msgstr "äÒÕÇÉÊ ÐÒÉ×¦Ä ÄÉÓËÅÔÉ"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
+msgid "About Harddrake"
msgstr ""
-"ãÅÊ ÐÁÒÏÌØ ÚÁÎÁÄÔÏ ÐÒÏÓÔÉÊ (צΠÐÏ×ÉÎÅÎ ÂÕÔÉ ÈÏÞÁ  %d ̦ÔÅÒ ÚÁ×ÄÏ×ÖËÉ)"
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "No password"
-msgstr "âÅÚ ÐÁÒÏÌÀ"
+msgid "Drive capacity"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Set root password"
-msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÐÁÒÏÌØ root'Á"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"÷ÓÔÁ×ÔÅ ÄÉÓËÅÔÕ × ÄÉÓËÏצÄ\n"
+"÷Ó¦ ÄÁΦ ÎÁ Ã¦Ê ÄÉÓËÅÔ¦ ÂÕÄÕÔØ ×ÔÒÁÞÅΦ"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr ""
+msgid "Size: %s"
+msgstr "òÏÚͦÒ: %s"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Services: %d activated for %d registered"
+msgid "Control and Shift keys simultaneously"
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Services"
-msgstr "óÅÒ×ÅÒ"
+msgid "secondary"
+msgstr "%d ÓÅËÕÎÄ"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "System"
-msgstr "óÉÓÔÅÍÎÉÊ ÒÅÖÉÍ"
+msgid "View Backup Configuration."
+msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "ðÏÒÔ"
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, report check result to syslog."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Bootloader"
-msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÚÁ×ÁÎÔÁÖÕ×ÁÞ"
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No password"
+msgstr "âÅÚ ÐÁÒÏÌÀ"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Boot"
-msgstr "Root"
+#: ../../lang.pm:1
+#, c-format
+msgid "Nigeria"
+msgstr "î¦ÇÅÒ¦Ñ"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "disabled"
-msgstr "ÚÁÂÏÒÏÎÉÔÉ"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "There is no existing partition to use"
+msgstr "îÅÍÁ¤ ¦ÓÎÕÀÞÉÈ Ð¦ÄÒÏÚÄ¦Ì¦× ÄÌÑ ×ÉËÏÒÉÓÔÁÎÎÑ"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "activated"
-msgstr "ÁËÔÉצÚÕ×ÁÔÉ ÚÁÒÁÚ"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr "õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦!"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Firewall"
-msgstr "Firewall/íÁÒÛÒÕÔÉÚÁÔÏÒ"
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"ýÏ ÄÒÕËÕ×ÁÔÉ ÎÁ ÐÒÉÎÔÅÒ¦ × ÍÅÒÅÖ¦, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÎÁÄÁÔÉ ÎÁÚ×Õ ÈÏÓÔÁ\n"
+"ÐÒÉÎÔÅÒÁ, ÔÁ ÍÏÖÌÉ×Ï ÎÏÍÅÒ ÐÏÒÔÁ. îÁ ÓÅÒ×ÅÒÁÈ HP JetDirect ÎÏÍÅÒ ÐÏÒÔÁ\n"
+"Õ Â¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦× 9100, ÎÁ ¦ÎÛÉÈ ÍÏÖÅ\n"
+"צÄÒ¦ÚÎÑÔÉÓØ. ðÒÏËÏÎÓÕÌØÔÕÊÔÅÓØ Ú ¦ÎÓÔÒÕËæ¤À ÄÏ ÁÐÁÒÁÔÎÏÇÏ\n"
+"ÚÁÂÅÚÐÅÞÅÎÎÑ."
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Security"
-msgstr "âÅÚÐÅËÁ"
+msgid "Hard drive information"
+msgstr "¶ÎÆÏÒÍÁÃ¦Ñ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Security Level"
-msgstr "÷ÓÔÁÎÏ×ÌÅÎÎÑ Ò¦×ÎÑ ÂÅÚÐÅËÉ"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Russian"
+msgstr "òÏÓ¦ÊÓØËÁ"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Network"
-msgstr "íÅÒÅÖÁ:"
+msgid "Jordan"
+msgstr "êÏÒÄÁΦÑ"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Network & Internet"
-msgstr "¶ÎÔÅÒÆÅÊÓ ÍÅÒÅÖ¦"
+msgid "Hide files"
+msgstr "ÚÂ¦Ê Õ mkraid"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Graphical interface"
-msgstr "óÔÁÒÔÕ×ÁÔÉ X Á×ÔÏÍÁÔÉÞÎÏ"
+msgid "Auto-detect printers connected to this machine"
+msgstr "÷¦ÄÄÁÌÅÎÉÊ ÐÒÉÎÔÅÒ"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Hardware"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "TV card"
-msgstr "ôÅÌÅצڦÊÎÁ ÐÌÁÔÁ"
+msgid "Sorry, no floppy drive available"
+msgstr "ðÅÒÅÐÒÏÛÕÀ, ÎÅÍÁ¤ ÐÒÉ×ÏÄÕ ÄÉÓËÅÔÉ"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
+msgid "Bolivia"
+msgstr "âÏ̦צÑ"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "þÉ ×É ÍÁ¤ÔÅ ¦ÎÛ¦?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Sound card"
-msgstr "ú×ÕËÏ×Á ÐÌÁÔÁ"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Remote CUPS server"
-msgstr "÷¦ÄÄÁÌÅÎÉÊ ÓÅÒ×ÅÒ CUPS"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "No printer"
-msgstr "îÅÍÁ¤ ÐÒÉÎÔÅÒÁ"
+msgid "Bad package"
+msgstr "ðÁËÅÔÉ ÎÅÒÏÂÏÞ¦"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Printer"
-msgstr "ðÒÉÎÔÅÒ"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#, c-format
-msgid "Mouse"
-msgstr "íÉÛÁ"
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "DrakSec Basic Options"
+msgstr "ðÁÒÁÍÅÔÒÉ"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Timezone"
-msgstr "þÁÓÏ×ÉÊ ÐÏÑÓ"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Keyboard"
-msgstr "ëÌÁצÁÔÕÒÁ"
+msgid "Romania"
+msgstr "òÕÍÕΦÑ"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
-#, c-format
-msgid "Summary"
-msgstr "úÁÇÁÌÏÍ"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "choose device"
+msgstr "ðÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÅÎÎÑ"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "NTP Server"
-msgstr "óÅÒ×ÅÒ NTP"
+msgid "Canada"
+msgstr "ëÁÎÁÄÁ"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "á×ÔÏÍÁÔÉÞÎÁ ÓÉÎÈÒÏΦÚÁÃ¦Ñ ÞÁÓÕ (¦Ú ÚÁÓÔÏÓÕ×ÁÎÎÑÍ NTP)"
+msgid "Remove from LVM"
+msgstr "÷ÉÄÁÌÉÔÉ Ú LVM"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "çÏÄÉÎÎÉË ×ÓÔÁÎÏ×ÌÅÎÏ × GMT (ÞÁÓ ÐÏ ½Ò¦ÎצÞÕ)?"
+msgid "Timezone"
+msgstr "þÁÓÏ×ÉÊ ÐÏÑÓ"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "÷ ÑË¦Ê ÞÁÓÏ×¦Ê ÓÍÕÚ¦ ÷É ÚÎÁÈÏÄÉÔÅÓØ?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "þÉ ÔÒÅÂÁ ÷ÁÍ ÎÁÓÔÒϧÔÉ ÄÒÕË?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "îÅÍÏÖÌÉ×Ï ×ÉËÏÎÁÔÉ fork: %s"
+msgid "German"
+msgstr "î¦ÍÅÃØËÁ"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "ú×'ÑÚÕÀÓØ Ú ÓÅÒ×ÅÒÏÍ ÝÏ ÐÒÏÞÉÔÁÔÉ ÓÐÉÓÏË ÎÁÑ×ÎÉÈ ÐÁËÅÔ¦×"
+msgid "Next ->"
+msgstr "äÁ̦ ->"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "÷ÉÂÅÒ¦ÔØ ÓÅÒ×ÅÒ, Ú ÑËÏÇÏ Ú×ÁÎÔÁÖÉÔÉ ÐÁËÅÔÉ"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr "ú×'ÑÚÕÀÓØ Ú ÓÅÒ×ÅÒÏÍ ÝÏ ÐÒÏÞÉÔÁÔÉ ÓÐÉÓÏË ÎÁÑ×ÎÉÈ ÐÁËÅÔ¦×"
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
"\n"
-"Do you want to install the updates ?"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
msgstr ""
+"\n"
+"íÏÖÌÉ×Ï ÃÅÊ Ð¦ÄÒÏÚÄ¦Ì ¤ ЦÄÒÏÚĦÌÏÍ\n"
+"ÄÒÁÊ×ÅÒÁ, ×ÁÍ ÍÁÂÕÔØ ÎÅ ÐÏÔÒ¦ÂÎÏ\n"
+"ÊÏÇÏ ÚͦÎÀ×ÁÔÉ.\n"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "÷ÓÔÁ×ÔÅ ÄÉÓËÅÔÕ ðÏÎÏ×ÌÅÎÎÑ íÏÄÕÌ¦× × ÄÉÓËÏ×¦Ä %s"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "÷ÓÔÁ×ÔÅ ÓÉÓÔÅÍÎÕ ÄÉÓËÅÔÕ, ÑËÁ ×ÖÉ×ÁÌÁÓÑ × ÄÉÓËÏ×ÏĦ %s"
+msgid "Guinea-Bissau"
+msgstr "çצÎÅÑ-â¦ÓÁÕ"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ Ð¦ÓÌÑ ÕÓÔÁÎÏ×ËÉ"
+msgid "Horizontal refresh rate"
+msgstr "þÁÓÔÏÔÁ ÇÏÒÉÚÏÎÔÁÌØÎϧ ÒÏÚÇÏÒÔËÉ"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
msgstr ""
-"÷ÓÔÁÎÏ×ÌÀÀ ÐÁËÅÔ %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing installation"
-msgstr "ð¦ÄÇÏÔÏ×ËÁ ÕÓÔÁÎÏ×ËÉ"
+"îÅ ÍÏÖÕ ÚͦÎÉÔÉ ÔÏÞËÕ ÍÏÎÔÕ×ÁÎÎÑ ÄÁÎÏÇÏ ÒÏÚĦÌÕ, ÏÓ˦ÌØËÉ ×¦Î\n"
+"×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÄÌÑ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ. óÐÏÞÁÔËÕ ×¦ÄͦΦÔØ\n"
+"Ú×ÏÒÏÔΤ ÍÏÎÔÕ×ÁÎÎÑ."
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "ëÏÍÐÁËÔ-ÄÉÓË Ú ÅÔÉËÅÔËÏÀ \"%s\""
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+msgid "USB controllers"
msgstr ""
-"ñËÝÏ ÷É ÍÁ¤ÔÅ ×Ó¦ ËÏÍÐÁËÔ-ÄÉÓËÉ Ú ÐÏÄÁÎÉÈ ×ÉÝÅ, ÎÁÔÉÓΦÔØ ÎÁ \"çÁÒÁÚÄ\".\n"
-"ñËÝÏ ÷É ÎÅ ÍÁ¤ÔÅ ÖÏÄÎÏÇÏ Ú ÐÏÄÁÎÉÈ ×ÉÝÅ, ÎÁÔÉÓΦÔØ ÎÁ \"÷¦ÄͦÎÉÔÉ\".\n"
-"ñËÝÏ Ô¦ÌØËÉ ÄÅÑËÉÈ ËÏÍÐÁËÔ-ÄÉÓË¦× ÎÅ ×ÉÓÔÁÞÁ¤, צÄͦΦÔØ §È ×ɦÒ, ¦\n"
-"ÎÁÔÉÓΦÔØ \"çÁÒÁÚÄ\" ЦÓÌÑ ÃØÏÇÏ.\" "
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../Xconfig/various.pm:1
+#, fuzzy, c-format
+msgid "What norm is your TV using?"
+msgstr "ñËÉÊ ÔÉÐ Ú'¤ÄÎÁÎÎÑ ISDN ÷É ÍÁ¤ÔÅ?"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "All"
-msgstr "÷ÓÅ"
+msgid "Type:"
+msgstr "ôÉÐ:"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
+msgid "Share name"
+msgstr "îÁÚ×Á ÒÅÓÕÒÓÕ"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr ""
+msgid "enable"
+msgstr "ÄÏÚ×ÏÌÉÔÉ"
#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "With X"
-msgstr "þÅËÁÊÔÅ"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr "ú×'ÑÚÕÀÓØ Ú ÓÅÒ×ÅÒÏÍ ÝÏ ÐÒÏÞÉÔÁÔÉ ÓÐÉÓÏË ÎÁÑ×ÎÉÈ ÐÁËÅÔ¦×"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
msgstr ""
+"ðÒÏÂÌÅÍÁ ÐÒÉ ÐÅÒÅÚÁÐÕÓËÕ ÍÅÒÅÖ¦:\n"
+"\n"
+"%s"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Type of install"
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔ ÄÌÑ ÕÓÔÁÎÏ×ËÉ"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Remove the loopback file?"
+msgstr "óÔÅÒÔÉÆÁÊÌÕ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ?"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Selected size is larger than available space"
msgstr "÷ÉÂÒÁÎÉÊ ÒÏÚÍ¦Ò Â¦ÌØÛÉÊ ÚÁ ÎÁÑ×ÎÉÊ ÐÒÏÓÔ¦Ò"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "÷ÓÔÁ×ÔÅ ÄÉÓËÅÔÕ, Ú ÚÁÐÉÓÁÎÉÍ ÓÐÉÓËÏÍ ÐÁËÅÔ¦×"
+msgid "NCP server name missing!"
+msgstr "îÅÍÁ¤ ÎÁÚ×É ÓÅÒ×ÅÒÁ NCP!"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Loading from floppy"
-msgstr "÷¦ÄÎÏ×ÌÀÀ Ú ÄÉÓËÅÔÉ"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Please choose your country."
+msgstr "ñËÉÊ ÔÉÐ ÍÉÛ¦ ×É ÍÁ¤ÔÅ?"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Package selection"
-msgstr "÷ÉÂ¦Ò ÐÁËÅÔ¦×"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Hard Disk Backup files..."
+msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Save on floppy"
-msgstr "úÁÐÉÓÁÔÉ ÎÁ ÄÉÓËÅÔÕ"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Laotian"
+msgstr "ìÁÔצÊÓØËÁ"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Load from floppy"
-msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÄÉÓËÅÔÉ"
+msgid "Samoa"
+msgstr "óÁÍÏÁ"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
msgstr ""
-"âÕÄØ ÌÁÓËÁ, ×ÉÂÅÒ¦ÔØ ÚÁÐÉÓ/ÚÁ×ÁÎÔÁÖÅÎÎÑ ×ÉÂÏÒÕ ÐÁËÅÔ¦× ÎÁ ÄÉÓËÅÔÕ.\n"
-"æÏÒÍÁÔ ÄÉÓÔÅÔÉ ÔÁËÉÊ-ÖÅ, ÑË ¦ ÄÉÓËÅÔÉ auto_install."
+"ðÒÏÔÏËÏÌ rstat ÄÁ¤ ÍÏÖÌÉצÓÔØ ËÏÒÉÓÔÕ×ÁÞÁÍ × ÍÅÒÅÖ¦ ÏÔÒÉÍÕ×ÁÔÉ ÄÁΦ\n"
+"ÐÒÏ ÚÁ×ÁÎÔÁÎÎÑ ÂÕÄØ-ÑËÏÇÏ ËÏÍÐ'ÀÔÅÒÁ × Ã¦Ê ÍÅÒÅÖ¦."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+msgid "Re-generating list of configured scanners ..."
msgstr ""
-"õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅ ÚÁÌÉÛÉÌÏÓØ ÄÏÓÔÁÔÎØÏ ×¦ÌØÎÏÇÏ Í¦ÓÃÑ ÄÌÑ ÕÓÔÁÎÏ×ËÉ\n"
-"ÞÉ ÐÏÎÏ×ÌÅÎÎÑ (%d > %d )"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "ûÕËÁÀ ÎÁÑ×Φ ÐÁËÅÔÉ"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "ûÕËÁÀ ÐÁËÅÔÉ ÄÌÑ ÐÏÎÏ×ÌÅÎÎÑ"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Looking at packages already installed..."
-msgstr "÷ÉÂ¦Ò ÃØÏÇÏ ÐÁËÅÔÕ ÎÅÍÏÖÌÉ×Ï ×¦ÄͦÎÉÔÉ. êÏÇÏ ×ÖÅ ×ÓÔÁÎÏ×ÌÅÎÏ."
+msgid "Scanner"
+msgstr "÷ÉÂÅÒ¦ÔØ ÇÒÁƦÞÎÕ ÐÌÁÔÕ"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, fuzzy, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "ûÕËÁÀ ÎÁÑ×Φ ÐÁËÅÔÉ"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
+msgid "Warning: testing this graphic card may freeze your computer"
msgstr ""
-"îÅ ×ÉÓÔÁÞÁ¤ Ó×ÏÐ-ÐÁÍ'ÑÔ¦ ÝÏ ÚÁ˦ÎÞÉÔÉ ÕÓÔÁÎÏ×ËÕ. ú¦ÌØÛ¦ÔØ\n"
-"§§. ÂÕÄØ-ÌÁÓËÁ."
+"õ×ÁÇÁ! ôÅÓÔÕ×ÁÎÎÑ Ã¦¤§ ÇÒÁƦÞÎϧ ÐÌÁÔÉ ÍÏÖÅ ÐÒÉÚ×ÅÓÔÉ ÄÏ ÚÁ×ÉÓÁÎÎÑ\n"
+"÷ÁÛÏÇÏ ËÏÍÐ'ÀÔÅÒÁ."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""
+"¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ ÐÏ×ÉÎÎÏ ÓËÌÁÄÁÔÉÓÑ Ô¦ÌØËÉ Ú ÍÁÌÉÈ ÌÁÔÉÎÓØËÉÈ Ì¦ÔÅÒ,\n"
+"ÞÉÓÅÌ, `-' ÔÁ `_'"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Check bad blocks?"
-msgstr "ðÅÒÅצÒÑÔÉ Ú¦ÊΦ ÂÌÏËÉ?"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Menudrake"
+msgstr "×ÉÚÎÁÞÁÌØÎÉÊ"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "÷ÉÂÅÒ¦ÔØ Ð¦ÄÒÏÚĦÌÉ, Ñ˦ ÷É ÈÏÞÅÔŠצÄÆÏÒÍÁÔÕ×ÁÔÉ"
+msgid "Welcome To Crackers"
+msgstr "úÌÏÍÝÉËÉ! ìÁÓËÁ×Ï ÐÒÏÓÉÍÏ!"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"äÌÑ ÔÏÇÏ, ÝÏ ÔÁÂÌÉÃÑ Ð¦ÄÒÏÚÄ¦Ì¦× ÂÕÌÁ ÁËÔÉצÚÏ×ÁÎÁ, ÷ÁÍ ÔÒÅÂÁ\n"
-"ÐÅÒÅ×ÁÎÔÁÖÉÔÉ ÓÉÓÔÅÍÕ"
+msgid "Module options:"
+msgstr "ïÐæ§ ÍÏÄÕÌÑ:"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+msgid "Secure your networks with the Multi Network Firewall"
msgstr ""
-"îÅ ×ÉÓÔÁÞÁ¤ צÌØÎÏÇÏ Í¦ÓÃÑ ÄÌÑ 1íâ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÏÇÏ ÂÌÏËÕ! õÓÔÁÎÏ×ËÁ\n"
-"ÂÕÄÅ ÐÒÏÄÏ×ÖÕ×ÁÔÉÓØ, ÁÌÅ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ Ó×Ϥ§ ÓÉÓÔÅÍÉ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ\n"
-"ÂÕÄÅ ÓÔ×ÏÒÉÔÉ DiskDrake'ÏÍ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÉÊ Ð¦ÄÒÏÚÄ¦Ì "
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "÷ÉÂÅÒ¦ÔØ ÔÏÞËÉ ÍÏÎÔÕ×ÁÎÎÑ"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "óËÁÎÕ×ÁÎÎÑ Ð¦ÄÒÏÚÄ¦Ì¦× ÄÌÑ ÚÎÁÈÏÄÖÅÎÎÑ ÔÏÞÏË ÍÏÎÔÕ×ÁÎÎÑ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Go on without configuring the network"
+msgstr "ëÏÎƦÇÕÒÕÀ ÍÅÒÅÖÕ"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "No partition available"
-msgstr "ÎÅÍÁ¤ ЦÄÒÏÚĦ̦×"
+msgid "Abort"
+msgstr "÷¦ÄͦÎÉÔÉ"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring IDE"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ IDE"
+msgid "No password prompt on %s at port %s"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "IDE"
-msgstr "IDE"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "ëÏÎƦÇÕÒÕÀ ËÁÒÔËÉ PCMCIA..."
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Usage of remote scanners"
+msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ×¦ÌØÎÉÊ ÐÒÏÓÔ¦Ò"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "\t-CDROM.\n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "åÍÕÌÑÃ¦Ñ 3 ËÌÁצÛ"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"ð¦ÄÒÏÚÄ¦Ì Ú Windows ÎÁ ÷ÁÛÏÍÕ ËÏÍÐ'ÀÔÅÒ¦ ÚÁÎÁÄÔÏ\n"
+"ÆÒÁ­ÍÅÎÔÏ×ÁÎÉÊ. ÷ÉËÏÎÁÊÔÅ ÄÅ-ÆÒÁ­ÍÅÎÔÁæÀ \n"
+"ÓÐÏÞÁÔËÕ (ËÏÍÁÎÄÁ ``defarg'')."
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "åÍÕÌÑÃ¦Ñ 2 ËÌÁצÛ"
+msgid "Dvorak (Norwegian)"
+msgstr "ä×ÏÒÁËÁ (îÏÒ×ÅÚØËÁ)"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Buttons emulation"
-msgstr "åÍÕÌÑÃ¦Ñ ËÌÁצÛ"
+msgid "Hard Disk Backup Progress..."
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "÷ÉÂÅÒ¦ÔØ ÄÏ ÑËÏÇÏ ÐÏÓ̦ÄÏ×ÎÏÇÏ ÐÏÒÔÕ ÐÒɤÄÎÁÎÏ ÍÉÛÕ?"
+msgid "Unable to fork: %s"
+msgstr "îÅÍÏÖÌÉ×Ï ×ÉËÏÎÁÔÉ fork: %s"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mouse Port"
-msgstr "ðÏÒÔ ÍÉÛ¦"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please choose your type of mouse."
-msgstr "ñËÉÊ ÔÉÐ ÍÉÛ¦ ×É ÍÁ¤ÔÅ?"
+msgid "Type: "
+msgstr "ôÉÐ: "
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "ðÁÒÏ̦ Ò¦ÚΦ"
+msgid "<-- Edit Client"
+msgstr "ë̦¤ÎÔ DHCP"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Upgrade %s"
-msgstr "ðÏÎÏ×ÌÅÎÎÑ"
+msgid "no fonts found"
+msgstr "îÅ ÚÎÁÊÄÅÎÏ %s."
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "ãÅ ÕÓÔÁÎÏ×ËÁ ÞÉ ÐÏÎÏ×ÌÅÎÎÑ?"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Mouse"
+msgstr "íÉÛÁ"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Install/Upgrade"
-msgstr "÷ÓÔÁÎÏ×ÉÔÉ/ðÏÎÏ×ÉÔÉ"
+#: ../../bootloader.pm:1
+#, c-format
+msgid "not enough room in /boot"
+msgstr "ÎÅÄÏÓÔÁÔÎØÏ Í¦ÓÃÑ × /boot"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "ôÕÔ ÎÁ×ÅÄÅÎÏ ÐÏ×ÎÉÊ ÓÐÉÓÏË ÎÁÑ×ÎÉÈ ËÌÁצÁÔÕÒ"
+msgid "Choosing an arbitratry driver"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please choose your keyboard layout."
-msgstr "ñËÁ Õ ÷ÁÓ ÒÏÚËÌÁÄËÁ ËÌÁצÁÔÕÒÉ?"
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, c-format
+msgid "Host name"
+msgstr "îÁÚ×Á ÈÏÓÔÁ"
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Quit"
-msgstr "÷ÉȦÄ"
+msgid "Liechtenstein"
+msgstr "ì¦ÈÔÅÎÛÔÅÊÎ"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "License agreement"
-msgstr "ì¦ÃÅÎÚ¦ÊÎÁ ÕÍÏ×Á"
+msgid "the color of the progress bar"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "An error occurred"
-msgstr "óÔÁÌÁÓÑ ÐÏÍÉÌËÁ"
+msgid "Suppress Fonts Files"
+msgstr ""
-#: ../../install_steps_newt.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
+msgid "Add to RAID"
+msgstr "äÏÄÁÔÉ ÄÏ RAID"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
msgstr ""
-" <Tab>/<Alt-Tab> Í¦Ö ÅÌÅÍÅÎÔÁÍÉ | <Space> ×ÉÂ¦Ò | <F12> ÎÁÓÔÕÐÎÉÊ ÅËÒÁÎ"
+"íÏÖÅÔÅ ÄÏÄÁÔÉ ÄÏÄÁÔËÏצ ÐÕÎËÔÉ ÄÌÑ yaboot, ÁÂÏ ÄÌÑ ÏÐÅÒÁæÊÎÉÈ ÓÉÓÔÅÍ,\n"
+"¦ÎÛÉÈ ÑÄÅÒ ÞÉ ÄÌÑ Á×ÁÒ¦ÊÎÏÇÏ ÏÂÒÁÚÕ ÚÁ×ÁÎÔÁÖÅÎÎÑ.\n"
+"\n"
+"äÌÑ ¦ÎÛÉÈ ïó - ÐÕÎËÔ ÓËÌÁÄÁ¤ÔØÓÑ Ô¦ÌØËÉ Ú ÅÔÉËÅÔËÉ ÔÁ ЦÄÒÏÚĦÌÕ ÄÌÑ\n"
+"ËÏÒÅÎÅ×ϧ ÆÁÊÌÏ×ϧ ÓÉÓÔÅÍÉ.\n"
+"\n"
+"äÌÑ ì¦ÎÁËÓÁ ¤ ˦ÌØËÁ ÍÏÖÌÉ×ÉÈ ÐÁÒÁÍÅÔÒ¦×: \n"
+"\n"
+" * åÔÉËÅÔËÁ: ÃÅ ÐÒÏÓÔÏ ÎÁÚ×Á, ÑËÕ ×É ÍÁ¤ÔÅ ÎÁÄÒÕËÕ×ÁÔÉ ÐÒÉ ÚÁÐÒÏÛÅÎΦ\n"
+"yaboot, ÝÏ ×ÉÂÒÁÔÉ ÃÀ ÏÐæÀ ÚÁ×ÁÎÔÁÖÅÎÎÑ.\n"
+"\n"
+" * ïÂÒÁÚ: ÃÅ - ÎÁÚ×Á ÑÄÒÁ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ. õ ¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦× - ÃÅ\n"
+"vmlinux ÁÂÏ ×ÁÒ¦ÁÎÔÉ ÎÁÚ×É Ú Ò¦ÚÎÉÍÉ ÒÏÚÛÉÒÅÎÎÑÍÉ.\n"
+"\n"
+" * ëÏÒÅÎÅ×Á ÆÁÊÌÏ×Á ÓÉÓÔÅÍÁ: ÐÒÉÓÔÒ¦Ê ÄÌÑ ËÏÒÅÎÅ×ϧ ÆÁÊÌÏ×ϧ ÓÉÓÔÅÍÉ,\n"
+"ÁÂÏ '/' ×ÁÛϧ ÓÉÓÔÅÍÉ ì¦ÎÁËÓ.\n"
+"\n"
+"\n"
+" * äÏÄÁÔÉ: ÎÁ ÁÐÁÒÁÔÎÏÍÕ ÚÁÂÅÚÐÅÞÅÎΦ Apple ÄÏÓÉÔØ ÞÁÓÔÏ\n"
+"×ÉËÏÒÉÓÔÏ×ÕÀÔØÓÑ ÄÏÄÁÔËÏצ ÐÁÒÁÍÅÔÒÉ ÄÌÑ ¦Î¦Ã¦Á̦ÚÁæ§ צÄÅÏ-ÐÌÁÔÉ ÁÂÏ\n"
+"ÄÌÑ ÔÏÇÏ, ÝÏ ¦Î¦Ã¦Á̦ÚÕ×ÁÔÉ ËÌÁצÁÔÕÒÎÕ ÅÍÕÌÑæÀ ËÌÁ×¦Û ÍÉÛËÉ, ÞÅÒÅÚ\n"
+"ÔÅ, ÝÏ ÎÁ ÓÔÁÎÄÁÒÔÎ¦Ê ÍÉÛæ Apple ÎÅÍÁ¤ 2-§ ¦ 3-§ ËÌÁצۦ. äÁ̦ ÐÏÄÁΦ\n"
+"ÄÅÑ˦ ÐÒÉËÌÁÄÉ: \n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+"\n"
+" * Initrd: ÃÅÊ ÐÁÒÁÍÅÔÒ ÍÏÖÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ ÄÌÑ ÔÏÇÏ, ÝÏÂ\n"
+"ÚÁ×ÁÎÔÁÖÕ×ÁÔÉ ÍÏÄÕ̦ ÄÏ ÔÏÇÏ, ÑË ÐÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÅÎÎÑ ÄÏÓÔÕÐÎÉÊ, ÁÂÏ\n"
+"ÝÏ ÐÒÏÞÉÔÁÔÉ ×¦ÒÔÕÁÌØÎÉÊ ÄÉÓË ÄÌÑ Á×ÁÒ¦ÊÎÏÇÏ ÚÁ×ÁÎÔÁÖÅÎÎÑ.\n"
+"\n"
+" * òÏÚÍ¦Ò initrd: ÓÔÁÎÄÁÒÔÎÉÊ ×¦ÒÔÕÁÌØÎÉÊ ÄÉÓË ÍÁ¤ ÒÏÚÍ¦Ò 4096 ÂÁÊÔ,\n"
+"ÑËÝÏ ×ÁÍ ÐÏÔÒ¦ÂÅÎ ÄÉÓË Â¦ÌØÛÏÇÏ ÒÏÚͦÒÕ, ÍÏÖÅÔÅ ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ ÃÉÍ\n"
+"ÐÁÒÁÍÅÔÒÏÍ.\n"
+"\n"
+" * úÁÐÉÓ/ÞÉÔÁÎÎÑ: Ú×ÉÞÎÏ ËÏÒÅÎÅ×Á ÆÁÊÌÏ×Á ÓÉÓÔÅÍÁ ÍÏÎÔÕ¤ÔØÓÑ × ÒÅÖÉͦ\n"
+"Ô¦ÌØËÉ ÄÌÑ ÞÉÔÁÎÎÑ, ÄÌÑ ÔÏÇÏ, ÝÏ ÍÁÔÉ ÍÏÖÌÉצÓÔØ ÐÒÏ×ÅÓÔÉ ÐÅÒÅצÒËÕ\n"
+"ÆÁÊÌÏ×ϧ ÓÉÓÔÅÍÉ ÐÅÒÛ, Î¦Ö ÓÉÓÔÅÍÁ ÚÁ×ÁÎÔÁÖÕ¤ÔØÓÑ × ÒÏÂÏÞÉÊ ÒÅÖÉÍ. ãÅ\n"
+"ÍÏÖÎÁ צÄͦÎÉÔÉ ÔÕÔ.\n"
+"\n"
+" * âÅÚ÷¦ÄÅÏ: Õ ×ÉÐÁÄËÕ, ËÏÌÉ ×¦ÄÅÏ ÐÌÁÔÁ Apple ×ÉÑ×ÉÔØÓÑ ÏÓÏÂÌÉ×Ï\n"
+"ÐÒÏÂÌÅÍÁÔÉÞÎÏÀ, ×É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÃÅÊ ÐÁÒÁÍÅÔÒ ÄÌÑ ÔÏÇÏ, ÝÏÂ\n"
+"ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ ÓÔÁÎÄÁÒÔÎÉÍ framebuffer'ÏÍ.\n"
+"\n"
+" * óÔÁÎÄÁÒÎÁ: ÓÉÓÔÅÍÁ ×ÉÂÒÁÎÁ × ÃØÏÍÕ ÐÕÎËÔ¦ ÚÁ×ÁÎÔÁÖÉÔØÓÑ ÚÒÁÚÕ\n"
+"ЦÓÌÑ ÔÏÇÏ, ÑË ×É ÎÁÔÉÓÎÅÔÅ ENTER ÎÁ ÚÁÐÒÏÛÅÎΦ yaboot. ãÅÊ ÐÕÎËÔ ÂÕÄÅ\n"
+"ÔÁËÏÖ ÐÏËÁÚÁÎÉÊ ÓÉÍ×ÏÌÏÍ *, ÑËÝÏ ×É ÎÁÔÉÓÎÅÔÅ TAB, ÝÏ ÐÏÄÉ×ÉÔÉÓÑ\n"
+"ÓÐÉÓÏË ÓÉÓÔÅÍ. "
-#: ../../install_steps_newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "õÓÔÁÎÏ×ËÁ Mandrake Linux %s"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
-#: ../../install_steps.pm:1
-#, c-format
-msgid "No floppy drive available"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No floppy drive available!"
msgstr "îÅÍÁ¤ ÐÒÉ×ÏÄÁ ÄÉÓËÅÔÉ"
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Welcome to %s"
-msgstr "ìÁÓËÁ×Ï ÐÒÏÓÉÍÏ ÄÏ %s"
-
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
msgstr ""
-"äÅÑ˦ ×ÁÖÌÉצ ÐÁËÅÔÉ ÎÅ ÚÍÏÇÌÉ ×¦ÒÎÏ ×ÓÔÁÎÏ×ÉÔÉÓÑ. áÂÏ ÷ÁÛ\n"
-"ËÏÍÐÁËÔ-ÄÉÓË ÁÂÏ ÐÒÉ×¦Ä ÄÅÆÅËÔΦ. ðÅÒÅצÒÔÅ ËÏÍÐÁËÔ ÄÉÓË ÎÁ\n"
-"×ÓÔÁÎÏ×ÌÅÎÏÍÕ ËÏÍÐ'ÀÔÅÒ¦ ËÏÍÁÎÄÏÀ \"rpm -qpl \" \"Mandrake/RPMS/*.rpm\" \n"
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Duplicate mount point %s"
-msgstr "ðÏÄצÊΦ ÔÏÞËÉ ÍÏÎÔÕ×ÁÎÎÑ %s"
+msgid "Continue anyway?"
+msgstr "÷ÓÅ-ÔÁËÉ ÐÒÏÄÏ×ÖÕ×ÁÔÉ?"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
msgstr ""
-"óÔÁÌÁÓÑ ÐÏÍÉÌËÁ, ÁÌÅ Ñ ÎÅ ÚÎÁÀ, ÑË Ú ÎÅÀ ÐÏ×ÏÄÉÔÉÓÑ.\n"
-"ðÒÏÄÏ×ÖÕÊÔÅ ÎÁ Ó×¦Ê ×ÌÁÓÎÉÊ ÒÉÚÉË."
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please wait"
-msgstr "úÁÞÅËÁÊÔÅ, ÂÕÄØ-ÌÁÓËÁ"
+msgid "Printer"
+msgstr "ðÒÉÎÔÅÒ"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ok"
-msgstr "çÁÒÁÚÄ"
+msgid "Saudi Arabia"
+msgstr "óÁÕĦ×ÓØËÁ áÒÁצÑ"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Finish"
-msgstr "úÁ˦ÎÞÉÔÉ"
+msgid "Internet"
+msgstr "¶ÎÔÅÒÎÅÔ"
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Basic"
+msgid "Some devices were added:\n"
msgstr ""
-#: ../../interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Advanced"
-msgstr "äÏÓצÄÞÅÎÉÊ"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "çÅÏÍÅÔÒ¦Ñ: %s ÃÉ̦ÎÄÒ¦×, %s ÇÏÌÏ×ÏË, %s ÓÅËÔÏÒ¦×\n"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remove"
-msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
+msgid "Printing on the printer \"%s\""
+msgstr "÷ÉÍÉËÁÀ ÍÅÒÅÖÕ"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Modify"
-msgstr "úͦÎÉÔÉ"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
-#, c-format
-msgid "Add"
-msgstr "äÏÄÁÔÉ"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore From Tape"
+msgstr "÷¦ÄÎÏ×ÉÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×"
-#: ../../interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Choose a file"
-msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
+msgid "Choose the profile to configure"
+msgstr "÷ÉÂÅÒ¦ÔØ ÐÒÏƦÌØ ÄÌÑ ËÏÎƦÇÕÒÁæ§:"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup Now from configuration file"
+msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
+
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "Mount points should contain only alphanumerical characters"
msgstr ""
+"îÁÚ×Á ÐÒÉÎÔÅÒÁ ÍÁ¤ ÓËÌÁÄÁÔÉÓÑ Ô¦ÌØËÉ Ú Ì¦ÔÅÒ, ÃÉÆÒ ÔÁ ÓÉÍ×ÏÌÁ ЦÄËÒÅÓÌÅÎÎÑ."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Restarting printing system..."
+msgstr "ñËÕ ÓÉÓÔÅÍÕ ÄÒÕËÕ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ?"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Left \"Windows\" key"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "\"Menu\" key"
-msgstr ""
+msgid "See hardware info"
+msgstr "ðÅÒÅÇÌÑÎØÔÅ ¦ÎÆÏÒÍÁæÀ ÐÒÏ ÁÐÁÒÁÔÎÅ ÚÁÂÅÚÐÅÞÅÎÎÑ"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
+msgid "First sector of boot partition"
+msgstr "ðÅÒÛÉÊ ÓÅËÔÏÒ ÓÉÓÔÅÍÎÏÇÏ Ð¦ÄÒÏÚĦÌÕ (boot partition)"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
+msgid "Printer manufacturer, model"
+msgstr "÷ÉÒÏÂÎÉË ÐÒÉÎÔÅÒÁ, ÍÏÄÅÌØ"
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr ""
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Print, Don't Queue"
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Both Shift keys simultaneously"
+msgid "Subnet Mask:"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Right Alt key"
+msgid "LiLo and Bootsplash themes installation successfull"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "àÇÏÓÌÁ×ÓØËÁ (ÌÁÔÉÎÓØËÁ)"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"ä×Á ÄÕÖÅ ×ÁÖÌÉ×ÉÈ ÐÁÒÁÍÅÔÒÉ - ÃÅ ÞÁÓÔÏÔÁ ×ÅÒÔÉËÁÌØÎϧ ÒÏÚÇÏÒÔËÉ\n"
+"(ÔÏÂÔÏ - ÞÁÓÔÏÔÁ, Ú ÑËÏÀ ÏÂÎÏ×ÌÀ¤ÔØÓÑ ÚÏÂÒÁÖÅÎÎÑ ÎÁ ÅËÒÁΦ), ÔÁ\n"
+"ÎÁʦÌØÛ ×ÁÖÌÉ×Ï - ÞÁÓÔÏÔÁ ÇÏÒÉÚÏÎÔÁÌØÎϧ ÓÉÎÈÒÏΦÚÁæ§ (ÔÏÂÔÏ - ÔÁ\n"
+"ÞÁÓÔÏÔÁ, Ú ÑËÏÀ ÎÁ ÅËÒÁΦ ÍÁÌÀÀÔØÓÑ ÇÏÒÉÚÏÎÔÁÌØΦ ÒÑÄËÉ).\n"
+"\n"
+"äõöå ÷áöìé÷ï ðáí'ñôáôé, ÝÏ ×É ÐÏ×ÉÎΦ ×ÉÂÒÁÔÉ ÔÁËÉÊ ÍÏΦÔÏÒ, ÐÁÒÁÍÅÔÒÉ\n"
+"ÑËÏÇÏ ÎÅ ÐÅÒÅ×ÉÝÕÀÔØ ÓÐÒÁ×ÖÎ¦È ÐÁÒÁÍÅÔÒ¦× ÷ÁÛÏÇÏ ÍÏΦÔÏÒÁ: ¦ÎÁËÛÅ ÷É\n"
+"ÍÏÖÅÔÅ ÐÒÉÞÉÎÉÔÉ ÎÅÐÏÐÒÁ×ÎÕ ÛËÏÄÕ Ó×ϤÍÕ ÍÏΦÔÏÒÕ. \n"
+"ñËÝÏ ×É ÍÁ¤ÔÅ ÓÕÍΦ×É ÝÏÄÏ ÈÁÒÁËÔÅÒÉÓÔÉË Ó×ÏÇÏ ÍÏΦÔÏÒÁ ×ÉÂÅÒ¦ÔØ ÐÅ×ÎÏ\n"
+"ǦÒÛÉÊ ÍÏΦÔÏÒ."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "÷'¤ÔÎÁÍÓØËÁ \"ÃÉÆÒÏ×ÉÊ ÒÑÄ\" QWERTY"
+msgid "Modify"
+msgstr "úͦÎÉÔÉ"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "ëÌÁצÁÔÕÒÁ óûá (ͦÖÎÁÒÏÄÎÁ)"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "US keyboard"
-msgstr "ëÌÁצÁÔÕÒÁ óûá"
+msgid "Need hostname, username and password!"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "UK keyboard"
-msgstr "âÒÉÔÁÎÓØËÁ ËÌÁצÁÔÕÒÁ"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Ukrainian"
-msgstr "õËÒÁ§ÎÓØËÁ"
+msgid "HardDrake"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "ôÕÒÅÃØËÁ (ÔÒÁÄÉæÊÎÁ \"Q\" ÍÏÄÅÌØ)"
+msgid "new"
+msgstr "ÎÏ×ÉÊ"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "ôÕÒÅÃØËÁ (ÔÒÁÄÉæÊÎÁ \"F\" ÍÏÄÅÌØ)"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Would you like to try again?"
+msgstr "þÉ ÔÒÅÂÁ ÷ÁÍ ÎÁÓÔÒϧÔÉ ÄÒÕË?"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Tajik keyboard"
-msgstr "ôÁÄÖÉÃØËÁ ËÌÁצÁÔÕÒÁ"
+msgid "Wizard"
+msgstr "ðÏͦÞÎÉË"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Thai keyboard"
-msgstr "ôÁÊÓØËÁ ËÌÁצÁÔÕÒÁ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Edit selected server"
+msgstr "ÚÎÁÊÄÅÎÏ %s"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "÷¦ÒÍÅÎÓØËÁ (ÄÒÕËÁÒÓØËÁ ÍÁÛÉÎËÁ)"
+msgid "Please choose where you want to backup"
+msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Tamil (ISCII-layout)"
+msgid "You need to reboot for the partition table modifications to take place"
msgstr ""
+"äÌÑ ÔÏÇÏ, ÝÏ ÔÁÂÌÉÃÑ Ð¦ÄÒÏÚÄ¦Ì¦× ÂÕÌÁ ÁËÔÉצÚÏ×ÁÎÁ, ÷ÁÍ ÔÒÅÂÁ\n"
+"ÐÅÒÅ×ÁÎÔÁÖÉÔÉ ÓÉÓÔÅÍÕ"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "óÅÒÂÓØËÁ (ËÉÒÉÌÉÃÑ)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "óÌÏ×ÁÃØËÁ (QWERTY)"
-
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "óÌÏ×ÁÃØËÁ (QWERTZ)"
+msgid "Do not include the browser cache"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Slovenian"
-msgstr "óÌÏ×ÅÎÓØËÁ"
+msgid "Please, choose your keyboard layout."
+msgstr "ñËÁ Õ ÷ÁÓ ÒÏÚËÌÁÄËÁ ËÌÁצÁÔÕÒÉ?"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Swedish"
-msgstr "û×ÅÄÓØËÁ"
+msgid "Standard"
+msgstr "óÔÁÎÄÁÒÔÎÉÊ"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "òÏÓ¦ÊÓØËÁ (ñ÷åòôé)"
+msgid "Please choose your mouse type."
+msgstr "ñËÉÊ ÔÉÐ ÍÉÛ¦ ×É ÍÁ¤ÔÅ?"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Russian"
-msgstr "òÏÓ¦ÊÓØËÁ"
+msgid "Connect..."
+msgstr "ú'¤ÄÎÁÎÎÑ..."
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Romanian (qwerty)"
-msgstr "òÕÍÕÎÓØËÁ (qwerty)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Failed to configure printer \"%s\"!"
+msgstr "îÁÓÔÒÏÀÀ ÐÒÉÎÔÅÒ \"%s\"..."
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Romanian (qwertz)"
-msgstr "òÕÍÕÎÓØËÁ (qwertz)"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "not configured"
+msgstr "ÐÅÒÅÎÁÓÔÒϧÔÉ"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "ëÁÎÁÄÓØËÁ (ë×ÅÂÅË)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Portuguese"
-msgstr "ðÏÒÔÕÇÁÌØÓØËÁ"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "About"
+msgstr "÷¦ÄͦÎÉÔÉ"
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "ðÏÌØÓØËÁ (ÒÏÚËÌÁÄËÁ qwertz)"
+msgid "Proxies configuration"
+msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÐÒÏËÓ¦"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "ðÏÌØÓØËÁ (ÒÏÚËÌÁÄËÁ qwerty)"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "îÏÒ×ÅÚØËÁ"
+msgid "Start: sector %s\n"
+msgstr "ðÏÞÁÔÏË: ÓÅËÔÏÒ %s\n"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Dutch"
-msgstr "äÁÔÓØËÁ"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Network interface already configured"
+msgstr "íÏΦÔÏÒ ÎÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÉÊ"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Maltese (US)"
+msgid "Couldn't access the floppy!"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Maltese (UK)"
+msgid "connecting to Bugzilla wizard ..."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "óÅÒÂÓØËÁ (ËÉÒÉÌÉÃÑ)"
+msgid "Mail Server"
+msgstr "âÁÚÁ ÄÁÎÉÈ"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Myanmar (Burmese)"
-msgstr ""
+msgid "Please click on a partition"
+msgstr "ëÌÁÃΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁ ЦÄÒÏÚĦ̦"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Macedonian"
-msgstr "íÁËÅÄÏÎÓØËÁ"
+msgid "Linux"
+msgstr "ì¦ÎÁËÓ"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Malayalam"
+msgid "Have a nice day!"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Latvian"
-msgstr "ìÁÔצÊÓØËÁ"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "across Network"
+msgstr "íÅÒÅÖÁ:"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "ìÉÔÏ×ÓØËÁ \"ÆÏÎÅÔÉÞÎÁ\" QWERTY"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "ìÉÔÏ×ÓØËÁ \"ÃÉÆÒÏ×ÉÊ ÒÑÄ\" QWERTY"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Upgrade %s"
+msgstr "ðÏÎÏ×ÌÅÎÎÑ"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "ìÉÔÏ×ÓØËÁ AZERTY (ÎÏ×Á)"
+msgid "Select Printer Connection"
+msgstr "÷ÉÂÅÒ¦ÔØ Ú'¤ÄÎÁÎÎÑ ÐÒÉÎÔÅÒÁ"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "ìÉÔÏ×ÓØËÁ AZERTY (ÓÔÁÒÁ)"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Laotian"
-msgstr "ìÁÔצÊÓØËÁ"
+msgid "Scanning for TV channels in progress ..."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Latin American"
-msgstr "ìÁÔÉÎÏ-ÁÍÅÒÉËÁÎÓØËÁ"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Korean keyboard"
-msgstr "ëÏÒÅÊÓØËÁ ËÌÁצÁÔÕÒÁ"
+msgid "IP Range Start:"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "ñÐÏÎÓØËÁ 106 ËÌÁצÛ"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"óÕÐÅÒÓÅÒ×ÅÒ ÄÅÍÏÎ (¦ÌØÛ ×¦ÄÏÍÉÊ Ð¦Ä ÎÁÚ×ÏÀ inetd) ÓÌÕÖÉÔØ ÄÌÑ ÚÁÐÕÓËÕ\n"
+"Ò¦ÚÎÏÍÁΦÔÎÉÈ ÓÅÒ×¦Ó¦× ¶ÎÔÅÒÎÅÔÕ, ËÏÌÉ ÃÅ ÎÅÏÂȦÄÎÏ. ÷¦Î\n"
+"צÄÐÏצÄÁÌØÎÉÊ ÚÁ ÓÔÁÒÔ ÂÁÇÁÔØÏÈ ÓÅÒצӦ×, ÔÁËÉÈ ÑË telnet, ftp, rsh,\n"
+"ÔÁ rlogin. ðÒÉ ÎÅÐÒÁÃÀÀÞÏÍÕ ÓÅÒ×ÅÒ¦ inetd ÎÅ ÂÕÄÕÔØ ÔÁËÏÖ ÐÒÁÃÀ×ÁÔÉ\n"
+"×Ó¦ ¦ÎÛ¦ ÓÅÒצÓÉ."
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Inuktitut"
+msgid "the height of the progress bar"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Italian"
-msgstr "¶ÔÁ̦ÊÓØËÁ"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Icelandic"
-msgstr "¶ÓÌÁÎÄÓØËÁ"
+msgid "Argentina"
+msgstr "áÒÇÅÎÔÉÎÁ"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Iranian"
-msgstr "¶ÒÁÎÓØËÁ"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "¶ÚÒÁ§ÌØÓØËÁ (ÆÏÎÅÔÉÞÎÁ)"
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Domain Name Server"
+msgstr "îÁÚ×Á ÄÏÍÅÎÕ"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Level:"
+msgstr "÷ÓÔÁÎÏ×ÌÅÎÎÑ Ò¦×ÎÑ ÂÅÚÐÅËÉ"
+
+#: ../../fsedit.pm:1
#, c-format
-msgid "Israeli"
-msgstr "¶ÚÒÁ§ÌØÓØËÁ"
+msgid "Mount points must begin with a leading /"
+msgstr "ôÏÞËÁ ÍÏÎÔÕ×ÁÎÎÑ ÐÏ×ÉÎÎÁ ÐÏÞÉÎÁÔÉÓÑ Ú /"
-#: ../../keyboard.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Postfix Mail Server"
+msgstr "ðÏÛÔÏ×ÉÊ ÓÅÒ×ÅÒ postfix, ÓÅÒ×ÅÒ ÎÏ×ÉÎ inn"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Croatian"
-msgstr "èÏÒ×ÁÔÓØËÁ"
+msgid "Quit without saving"
+msgstr "÷ÉÊÔÉ ÂÅÚ ÚÁÐÉÓÕ"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Hungarian"
-msgstr "õÇÏÒÓØËÁ"
+msgid "Yemen"
+msgstr "´ÍÅÎ"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Gurmukhi"
+msgid "This product is available on the MandrakeStore Web site."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Gujarati"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Greek"
-msgstr "çÒÅÃØËÁ"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "çÒÕÚÉÎÓØËÁ (ÌÁÔÉÎÓØËÁ ÒÏÚËÌÁÄËÁ)"
+msgid "Hard drive detection"
+msgstr "÷ÉÚÎÁÞÅÎÎÑ ÔÉÐÕ ÄÉÓËÕ"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "çÒÕÚÉÎÓØËÁ (ÒÏÓ¦ÊÓØËÁ ÒÏÚËÌÁÄËÁ)"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "French"
-msgstr "æÒÁÎÃÕÚØËÁ"
+#: ../../diskdrake/dav.pm:1
+#, fuzzy, c-format
+msgid "Please enter the WebDAV server URL"
+msgstr "÷ÉÐÒÏÂÕÊÔÅ ÍÉÛËÕ, ÂÕÄØ-ÌÁÓËÁ"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Finnish"
-msgstr "æ¦ÎÓØËÁ"
+msgid "Tajikistan"
+msgstr "ôÁÄÖÉËÉÓÔÁÎ"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Spanish"
-msgstr "¶ÓÐÁÎÓØËÁ"
+msgid "Accept"
+msgstr "ðÒÉÊÎÑÔÉ"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Estonian"
-msgstr "åÓÔÏÎÓØËÁ"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Dvorak (Swedish)"
-msgstr "ä×ÏÒÁËÁ (óûá)"
+msgid "Description"
+msgstr "ïÐÉÓ"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "ä×ÏÒÁËÁ (îÏÒ×ÅÚØËÁ)"
+msgid "Error opening %s for writing: %s"
+msgstr "îÅ ÍÏÖÕ ×¦ÄËÒÉÔÉ %s ÎÁ ÚÁÐÉÓ: %s"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "ä×ÏÒÁËÁ (óûá)"
+msgid "Mouse type: %s\n"
+msgstr "ôÉÐ ÍÉÛ¦: %s\n"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Danish"
-msgstr "äÁÔÓØËÁ"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr ""
+"÷ÁÛÁ צÄÅÏÐÌÁÔÁ ÍÏÖÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÁÐÁÒÁÔÎÉÍ 3D ÐÒÉÓËÏÒÅÎÎÑÍ ÇÒÁƦËÉ\n"
+"ÁÌÅ Ô¦ÌØËÉ Ú ÓÅÒ×ÅÒÏÍ XFree %s."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "ñËÁ Õ ÷ÁÓ ÒÏÚËÌÁÄËÁ ËÌÁצÁÔÕÒÉ?"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Devanagari"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "î¦ÍÅÃØËÁ (ÂÅÚ ÍÅÒÔ×ÉÈ ËÌÁצÛ)"
+msgid "Expert Area"
+msgstr "ä¦ÌÑÎËÁ ÄÌÑ ÅËÓÐÅÒÔ¦×"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "German"
-msgstr "î¦ÍÅÃØËÁ"
+msgid "Choose a monitor"
+msgstr "÷ÉÂÅÒ¦ÔØ ÔÉÐ ÍÏΦÔÏÒÕ"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "þÅÓØËÁ (QWERTY)"
+msgid "Empty label not allowed"
+msgstr "îÅ ÄÏÚ×ÏÌÑÀÔØÓÑ ÐÕÓÔ¦ ÅÔÉËÅÔËÉ"
#: ../../keyboard.pm:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "þÅÓØËÁ (QWERTZ)"
+msgid "Maltese (UK)"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "û×ÅÊÃÁÒÓØËÁ (ÆÒÁÎÃÕÚØËÁ ÒÏÚËÌÁÄËÁ)"
+msgid "I can't add any more partition"
+msgstr "îÅ ÍÏÖÕ ÄÏÄÁÔÉ ÖÏÄÎÏÇÏ Ð¦ÄÒÏÚĦÌÕ"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "û×ÅÊÃÁÒÓØËÁ (ΦÍÅÃØËÁ ÒÏÚËÌÁÄËÁ)"
+msgid "Size in MB: "
+msgstr "òÏÚÍ¦Ò (íÂ): "
-#: ../../keyboard.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Belarusian"
-msgstr "â¦ÌÏÒÕÓØËÁ"
+msgid "Remote printer"
+msgstr "÷¦ÄÄÁÌÅÎÉÊ ÐÒÉÎÔÅÒ"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Bosnian"
-msgstr "åÓÔÏÎÓØËÁ"
+msgid "Please choose a language to use."
+msgstr "÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÍÏ×Õ."
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "âÒÁڦ̦ÊÓØËÁ (ABNT-2)"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bulgarian (BDS)"
-msgstr "âÏÌÇÁÒÓØËÁ"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"õ÷áçá: ãÅÊ ÐÒÉÓÔÒ¦Ê ÂÕÌÏ ÐÏÐÅÒÅÄÎØÏ ÎÁÓÔÒϤÎÏ ÄÌÑ Ú'¤ÄÎÁÎÎÑ Ú ¶ÎÔÅÒÎÅÔÏÍ.\n"
+"\n"
+"ðÒÏÓÔÏ ÎÁÔÉÓΦÔØ \"çÁÒÁÚÄ\" ÝÏ ÚÂÅÒÅÇÔÉ ËÏÎƦ­ÕÒÁæÀ ÐÒÉÓÔÒÏÀ.\n"
+"úͦÎÁ ÐÏÌ¦× ÎÉÖÞÅ ÐÒÉ×ÅÄÅ ÄÏ ÚͦÎÉ ËÏÎƦ­ÕÒÁæ§ ÐÒÉÓÔÒÏÀ."
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "÷¦ÒÍÅÎÓØËÁ (ÆÏÎÅÔÉÞÎÁ)"
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"ñ ÍÏÖÕ ÎÁÓÔÒϧÔÉ ÷ÁÛÕ ÓÉÓÔÅÍÕ ÔÁË, ÝÏ X ÂÕÄÅ ÓÔÁÒÔÕ×ÁÔÉ Á×ÔÏÍÁÔÉÞÎÏ\n"
+"ЦÓÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ.\n"
+"þÉ ×É ÂÁÖÁ¤ÔÅ ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ Ã¦¤À ÍÏÖÌÉצÓÔÀ?"
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Bengali"
-msgstr "ÄÏÚ×ÏÌÉÔÉ"
+msgid "Floppy format"
+msgstr "æÏÒÍÁÔÕ×ÁÔÉ"
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Belgian"
-msgstr "âÅÌØǦÊÓØËÁ"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "áÚÅÒÂÁÊÄÖÁÎÓØËÁ (ÌÁÔÉÎÁ)"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Generic Printers"
+msgstr "ðÒÉÎÔÅÒ"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Arabic"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Armenian (phonetic)"
-msgstr "÷¦ÒÍÅÎÓØËÁ (ÆÏÎÅÔÉÞÎÁ)"
-
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "÷¦ÒÍÅÎÓØËÁ (ÄÒÕËÁÒÓØËÁ ÍÁÛÉÎËÁ)"
+msgid "The scanners on this machine are available to other computers"
+msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Armenian (old)"
-msgstr "÷¦ÒÍÅÎÓØËÁ (ÓÔÁÒÁ)"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "First sector of the root partition"
+msgstr "ðÅÒÛÉÊ ÓÅËÔÏÒ ÓÉÓÔÅÍÎÏÇÏ Ð¦ÄÒÏÚĦÌÕ (boot partition)"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Albanian"
-msgstr "áÌÂÁÎÓØËÁ"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Alternative drivers"
+msgstr "äÏÄÁÔËÏ×Á ÔÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ (A4)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Polish"
-msgstr "ðÏÌØÓØËÁ"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Dvorak"
-msgstr "ä×ÏÒÁËÁ"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Zimbabwe"
-msgstr "ú¦ÍÂÁÂ×Å"
+msgid "Cape Verde"
+msgstr "ïÓÔÒÏ×É úÅÌÅÎÏÇÏ íÉÓÕ"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Zambia"
-msgstr "úÁͦÑ"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "South Africa"
-msgstr "ð¦×ÄÅÎÁ áÆÒÉËÁ"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Serbia"
-msgstr "ÐÏÓ̦ÄÏ×ÎÉÊ"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Mayotte"
-msgstr "íÁÊÏÔÔ"
+msgid "Guam"
+msgstr "½ÕÁÍ"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Yemen"
-msgstr "´ÍÅÎ"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Samoa"
-msgstr "óÁÍÏÁ"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Wallis and Futuna"
-msgstr "÷ÁÌ¦Ó ¦ æÕÔÕÎÓØ˦ ÏÓÔÒÏ×É"
+msgid "/Options/Test"
+msgstr "/ðÁÒÁÍÅÔÒÉ/ôÅÓÔ"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "÷ÁÎÕÁÔÕ"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"ãÅÊ Ò¦×ÅÎØ ÐÏÔÒ¦ÂÎÏ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ Ú ÏÂÅÒÅÖΦÓÔÀ. ÷¦Î ÄÏÚ×ÏÌѤ ¦ÌØÛ\n"
+"ÐÒÏÓÔÅ ËÏÒÉÓÔÕ×ÁÎÎÑ ÷ÁÛÏÀ ÓÉÓÔÅÍÏÀ, ÁÌÅ ¤ ÎÁÄÚ×ÉÞÁÊÎÏ ÎÅÎÁĦÊÎÉÍ. îÅ\n"
+"ÍÏÖÎÁ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÔÁËÏÀ ÓÉÓÔÅÍÏÀ, ËÏÌÉ ×ÏÎÁ ЦÄ'¤ÄÎÁÎÁ ÍÅÒÅÖÅÀ ÄÏ\n"
+"¦ÎÛÉÈ ÓÉÓÔÅÍ, ÁÂÏ ÄÏ ¦ÎÔÅÒÎÅÔÕ. ðÁÒÏ̦ ÎÅ ×ÉËÏÒÉÓÔÏ×ÕÀÔØÓÑ × Ã¦Ê\n"
+"ÓÉÓÔÅͦ."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, fuzzy, c-format
-msgid "Vietnam"
-msgstr "÷'¤ÔÎÁÍ"
+msgid "Mounting partition %s"
+msgstr "æÏÒÍÁÔÕ×ÁÎÎÑ Ð¦ÄÒÏÚĦÌÕ %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "÷¦ÒǦÎÓØ˦ ÏÓÔÒÏ×É (óûá)"
+msgid "User name"
+msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "÷¦ÒǦÎÓØ˦ ÏÓÔÒÏ×É (âÒÉÔÁΦÑ)"
+msgid "New configuration (isdn-light)"
+msgstr "îÏ×Á ËÏÎƦ­ÕÒÁÃ¦Ñ (isdn-light)"
-#: ../../lang.pm:1
-#, c-format
-msgid "Venezuela"
-msgstr "÷ÅÎÅÓÕÅÌÁ"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Userdrake"
+msgstr "äÒÕËÁÒËÁ"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "ó×. ÷¦ÎÓÅÎÔ ¦ çÒÅÎÁĦÎÚ"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "ñËÉÊ Ð¦ÄÒÏÚÄ¦Ì ×É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÁÔÉ ÄÌÑ Linux4Win?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Vatican"
-msgstr "ìÁÔצÊÓØËÁ"
+msgid "Backup system"
+msgstr "õÓÔÁÎÏ×ËÁ ÆÁÊÌ. ÓÉÓÔÅÍ"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Uzbekistan"
-msgstr "õÚÂÅËÉÓÔÁÎ"
+msgid "Test pages"
+msgstr "ôÅÓÔÕÀ ÓÔÏÒ¦ÎËÉ"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Uruguay"
-msgstr "õÒÕÇ×ÁÊ"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "ïÓÔÒÏ×É óÐÏÌÕÞÅÎÉÈ ûÔÁÔ¦× áÍÅÒÉËÉ"
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Checking %s"
+msgstr "÷ÉÄÁÌÅÎÎÑ LPD..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "TCP/Socket Printer Options"
+msgstr "ðÁÒÁÍÅÔÒÉ ÐÒÉÎÔÅÒÁ × ÍÅÒÅÖ¦"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Uganda"
-msgstr "õÇÁÎÄÁ"
+msgid "Card mem (DMA)"
+msgstr "ðÁÍ'ÑÔØ ËÁÒÔËÉ (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Ukraine"
-msgstr "õËÒÁ§ÎÁ"
+msgid "France"
+msgstr "æÒÁÎæÑ"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Tanzania"
+msgid "browse"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Taiwan"
-msgstr "ôÁÊÌÁÎÄ"
-
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Tuvalu"
-msgstr "ôÕ×ÁÌÕ"
+msgid "Checking installed software..."
+msgstr "ðÅÒÅצÒËÁ ×ÓÔÁÎÏ×ÌÅÎÏÇÏ ÐÒÏÇÒÁÍÎÏÇÏ ÚÁÂÅÚÐÅÞÅÎÎÑ..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "ôҦΦÄÁÄ ÔÁ ôÏÂÁÇÏ"
+msgid "Remote printer name missing!"
+msgstr "÷¦ÄÓÕÔÎÑ ÎÁÚ×Á ÐÒÉÎÔÅÒÁ!"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr ""
+"÷ÓÔÁÎÏ×ÉÔÉ ÐÒÉÎÔÅÒ \"%s\"\n"
+"ÑË ÓÔÁÎÄÁÒÔÎÉÊ?"
#: ../../lang.pm:1
#, c-format
msgid "Turkey"
msgstr "ôÕÒæÑ"
-#: ../../lang.pm:1
-#, c-format
-msgid "Tonga"
-msgstr "ôÏÎÇÁ"
+#: ../../network/adsl.pm:1
+#, fuzzy, c-format
+msgid "Alcatel speedtouch usb"
+msgstr "speedtouch usb"
-#: ../../lang.pm:1
-#, c-format
-msgid "Tunisia"
-msgstr "ôÕΦÓ"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Number of buttons"
+msgstr "ä×ÏÈ ËÎÏÐÏÞÎÁ"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Turkmenistan"
-msgstr "ôÕÒËÍÅΦÓÔÁÎ"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "÷'¤ÔÎÁÍÓØËÁ \"ÃÉÆÒÏ×ÉÊ ÒÑÄ\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "East Timor"
-msgstr "óȦÄÎÉÊ ô¦ÍÏÒ"
+msgid "Module"
+msgstr "íÏÄÕÌØ"
-#: ../../lang.pm:1
-#, c-format
-msgid "Tokelau"
-msgstr "ôÏËÅÌÁÕ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"äÏÄÁÔËÏ×Ï, ÞÅÒÇÉ ÎÅ ÐÅÒÅÎÏÓÑÔØÓÑ Ã¦¤À ËÏÍÁÎÄÏÀ ¦ ËÏÎƦ­ÕÒÁæÑ\n"
+"\"foomatic-configure\" ÎÅ ÍÏÖÅ ÂÕÔÉ ÐÅÒÅÎÅÓÅÎÁ ÔÁËÏÖ."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Tajikistan"
-msgstr "ôÁÄÖÉËÉÓÔÁÎ"
+msgid "Hardware"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Thailand"
-msgstr "ôÁÊÌÁÎÄ"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Togo"
-msgstr "ôÏÇÏ"
+msgid "United States"
+msgstr "óÐÏÌÕÞÅΦ ÛÔÁÔÉ"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "French Southern Territories"
-msgstr "æÒÁÎÃÕÚØ˦ ð¦×ÄÅÎΦ ôÅÒÉÔÏÒ¦§"
+msgid "Default OS?"
+msgstr "ïÓÎÏ×ÎÁ ÓÉÓÔÅÍÁ?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Chad"
-msgstr "þÁÄ"
+msgid "Swiss (German layout)"
+msgstr "û×ÅÊÃÁÒÓØËÁ (ΦÍÅÃØËÁ ÒÏÚËÌÁÄËÁ)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "ïÓÔÒÏ×É ôÕÒËÓ ¦ ëÁÊËÏÓ"
+msgid "Configure all heads independently"
+msgstr "óËÏÎƦ­ÕÒÕ×ÁÔÉ ×Ó¦ ÍÏΦÔÏÒÉ ÎÅÚÁÌÅÖÎÏ"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "ó×ÁÚ¦ÌÅÎÄ"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Syria"
-msgstr "óÕÒ¦ÎÁÍ"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "åÌØ óÁÌØ×ÁÄÏÒ"
+msgid "NTP Server"
+msgstr "óÅÒ×ÅÒ NTP"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "óÁÎ-ôÏÍÅ ¦ ðÒ¦ÎӦЦ"
+msgid "Load/Save on floppy"
+msgstr "ðÒÏÞÉÔÁÔÉ/ÚÁÐÉÓÁÔÉ Ú/ÎÁ ÄÉÓËÅÔÕ"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Suriname"
-msgstr "óÕÒ¦ÎÁÍ"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Somalia"
-msgstr "óÏÍÁ̦"
+msgid "nice"
+msgstr "ÇÁÒÎÏ"
-#: ../../lang.pm:1
-#, c-format
-msgid "Senegal"
-msgstr "óÅÎÅÇÁÌ"
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Leaving in %d seconds"
+msgstr "%d ÓÅËÕÎÄ"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "San Marino"
-msgstr "óÁÎ íÁÒ¦ÎÏ"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "÷ÉÂÅÒ¦ÔØ ÄÏ ÑËÏÇÏ ÐÏÓ̦ÄÏ×ÎÏÇÏ ÐÏÒÔÁ ЦÄËÌÀÞÅÎÉÊ ÷ÁÛ ÍÏÄÅÍ?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Sierra Leone"
-msgstr "óؤÒÒÁ-ìÅÏÎÅ"
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Country"
+msgstr "ëÒÁ§ÎÁ:"
-#: ../../lang.pm:1
-#, c-format
-msgid "Slovakia"
-msgstr "óÌÏ×Á˦Ñ"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Property"
+msgstr "ðÏÒÔ"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "ó×ÁÌØÂÁÒĦÊÓØ˦ ¦ ñÎ íÁÊÅÎØÓ˦ ÏÓÔÒÏ×É"
+msgid "Ghostscript"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Slovenia"
-msgstr "óÌÏ×ÅΦÑ"
+msgid "LAN Configuration"
+msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦"
#: ../../lang.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "ó×ÑÔÁ åÌÅÎÁ"
+msgid "Ghana"
+msgstr "½ÁÎÁ"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Singapore"
-msgstr "ó¦ÎÇÁÐÕÒ"
+msgid "Path or Module required"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Sudan"
-msgstr "óÕÄÁÎ"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Advanced Options"
+msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Seychelles"
-msgstr "óÅÊÛÅÌØÓØ˦ ÏÓÔÒÏ×É"
+msgid "Coma bug"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Solomon Islands"
-msgstr "óÏÌÏÍÏÎÏצ ÏÓÔÒÏ×É"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"úÁÒÁÚ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ×ÉÂÒÁÔÉ, Ñ˦ ЦÄÒÏÚĦÌÉ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÄÌÑ ÷ÁÛϧ\n"
+"ÎÏ×ϧ ÓÉÓÔÅÍÉ ì¦ÎÁËÓ íÁÎÄÒÅÊË. ñËÝÏ Ã¦ ЦÄÒÏÚĦÌÉ ×ÖÅ ÂÕÌÉ ×ÉÚÎÁÞÅΦ\n"
+"(×¦Ä ÐÏÐÅÒÅÄÎØϧ ÕÓÔÁÎÏ×ËÉ ÓÉÓÔÅÍÉ GNU/Linux ÁÂÏ ÓÔ×ÏÒÅΦ ¦ÎÛÏÀ\n"
+"ÐÒÏÇÒÁÍÏÀ ÒÏÚÐÏĦÌÕ ÄÉÓËÕ), ×É ÍÏÖÅÔÅ ÓËÏÒÉÓÔÁÔÉÓÑ ×ÖÅ ÇÏÔÏ×ÉÍÉ\n"
+"ЦÄÒÏÚĦÌÁÍÉ. ÷ ¦ÎÛÏÍÕ ×ÉÐÁÄËÕ, ЦÄÒÏÚĦÌÉ ÎÁ ÖÏÒÓÔËÏÍÕ ÄÉÓËÕ ÍÁÀÔØ\n"
+"ÂÕÔÉ ×ÉÚÎÁÞÅÎÉÍÉ ÐÅÒÛ, Î¦Ö ÐÅÒÅÈÏÄÉÔÉ ÄÏ ÕÓÔÁÎÏ×ËÉ.\n"
+"\n"
+"äÌÑ ÓÔ×ÏÒÅÎÎÑ Ð¦ÄÒÏÚÄ¦Ì¦× ×É ÓÐÅÒÛÕ ÍÁ¤ÔÅ ×ÉÂÒÁÔÉ ÖÏÒÓÔËÉÊ ÄÉÓË. ÷É\n"
+"ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÄÉÓË ËÌÁÃÎÕ×ÛÉ ÎÁ \"hda\" (ÑËÝÏ ÍÏ×Á ÊÄÅ ÐÒÏ ÐÅÒÛÉÊ ÄÉÓË\n"
+"ÔÉÐÉ IDE), ÁÂÏ ÎÁ \"hdb\" (ÄÌÑ ÄÒÕÇÏÇÏ ÄÉÓËÕ × ÓÉÓÔÅͦ ÔÉÐÕ IDE), ÁÂÏ ÎÁ\n"
+"\"sda\", ÑËÝÏ ×É ÂÕÄÅÔÅ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ ÓÉÓÔÅÍÕ ÎÁ ÐÅÒÛÏÍÕ ÄÉÓËÕ ÔÉÐÕ SCSI\n"
+"¦ ÔÁË ÄÁ̦.\n"
+"\n"
+"ýÏ ÒÏÚÐÏĦÌÉÔÉ ÄÉÓË ÎÁ ÒÏÚĦÌÉ, ×É ÍÏÖÅÔÅ ÓËÏÒÉÓÔÁÔÉÓÑ ÃÉÍÉ ÐÕÎËÔÁÍÉ ÍÅÎÀ:\n"
+"\n"
+"* ïÞÉÓÔÉÔÉ ×ÓÅ: ÃÅÊ ÐÕÎËÔ ÓÔÉÒÁ¤ ×Ó¦ ЦÄÒÏÚĦÌÉ ÎÁ ×ÉÂÒÁÎÏÍÕ ÖÏÒÓÔËÏÍÕ "
+"ÄÉÓËÕ.\n"
+"\n"
+"* òÏÚÐÏĦÌÉÔÉ Á×ÔÏÍÁÔÉÞÎÏ: ÃÅÊ ÐÕÎËÔ ÍÅÎÀ ÄÏÐÏÍÏÖÅ ÷ÁÍ Á×ÔÏÍÁÔÉÞÎÏ\n"
+"ÓÔ×ÏÒÉÔÉ Ð¦ÄÒÏÚÄ¦Ì ÔÉÐÕ Ext2 ÔÁ swap ÎÁ צÌØÎÏÍÕ ÐÒÏÓÔÏÒ¦ ÄÉÓËÕ.\n"
+"\n"
+"* ÷¦ÄÎÏ×ÉÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×: ÑËÝÏ ÔÁÂÌÉÃÑ Ð¦ÄÒÏÚÄ¦Ì¦× ÷ÁÛÏÇÏ ÄÉÓËÕ\n"
+"Ú¦ÐÓÏ×ÁÎÁ, ×É ÍÏÖÅÔÅ ÓÐÅÒÛÕ ÓÐÒÏÂÕ×ÁÔÉ ×¦ÄÎÏ×ÉÔÉ §§ ÓËÏÒÉÓÔÕ×Á×ÛÉÓØ\n"
+"ÃÉÍ ÐÕÎËÔÏÍ. âÕÄØ-ÌÁÓËÁ, ÂÕÄØÔÅ-ÏÂÅÒÅÖÎÉÍÉ, ¦ ÐÁÍ'ÑÔÁÊÔÅ, ÝÏ ÃÅÊ ÐÕÎËÔ\n"
+"ÎÅ ÚÁ×ÖÄÉ ÓÐÒÁÃØÏ×Õ¤.\n"
+"\n"
+"* ðÏ×ÅÒÎÕÔÉÓØ: íÏÖÅÔÅ ÓËÏÒÉÓÔÕ×ÁÔÉÓØ ÃÉÍ, ÝÏ צÄÍÏ×ÉÔÉÓØ ×¦Ä ÚͦÎ,\n"
+"×ÎÅÓÅÎÉÈ ×ÁÍÉ.\n"
+"\n"
+"* ðÅÒÅÞÉÔÁÔÉ: íÏÖÅÔÅ ÓËÏÒÉÓÔÕ×ÁÔÉÓØ ÃÉÍ, ÝÏ צÄÍÏ×ÉÔÉÓØ ×¦Ä ÚͦÎ,\n"
+"×ÎÅÓÅÎÉÈ ×ÁÍÉ ¦ ÐÅÒÅÐÒÏÞÉÔÁÔÉ ÏÒÉ­¦ÎÁÌØÎÕ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×.\n"
+"\n"
+"\n"
+"* ðÏͦÞÎÉË: ñËÝÏ ×É ÈÏÞÅÔÅ ÓËÏÒÉÓÔÁÔÉÓØ ÐÏͦÞÎÉËÏÍ ÄÌÑ ÒÏÚÐÏĦÌÕ\n"
+"ÄÉÓËÕ. òÅËÏÍÅÎÄÏ×ÁÎÉÊ ÒÅÖÉÍ, ÑËÝÏ ×É ÎÅ ÍÁ¤ÔÅ ÇÌÉÂÏËÉÈ ÚÎÁÎØ ÐÒÏ\n"
+"ÒÏÚÐÏÄ¦Ì ÄÉÓËÕ. \n"
+"\n"
+"* ÷¦ÄÎÏ×ÉÔÉ Ú ÇÎÕÞËÏÇÏ ÄÉÓËÕ: ñËÝÏ ×É ÚÁÐÉÓÁÌÉ ÐÏÐÅÒÅÄÎØÏ Ó×ÏÀ ÔÁÂÌÉÃÀ\n"
+"ЦÄÒÏÚÄ¦Ì¦× ÎÁ ÇÎÕÞËÉÊ ÄÉÓË. úÁÒÁÚ ×É ÍÏÖÅÔŠצÄÎÏ×ÉÔÉ ÃÀ ÔÁÂÌÉÃÀ Ú\n"
+"ÇÎÕÞËÏÇÏ ÄÉÓËÕ.\n"
+"\n"
+"* úÁÐÉÓÁÔÉ ÎÁ ÇÎÕÞËÉÊ ÄÉÓË: ñËÝÏ ×É ÈÏÞÅÔÅ ÚÁÐÉÓÁÔÉ ÚÁÒÁÚ ÔÁÂÌÉÃÀ\n"
+"ЦÄÒÏÚÄ¦Ì¦× ÎÁ ÇÎÕÞËÉÊ ÄÉÓË ÄÌÑ ÔÏÇÏ, ÝÏ §§ ÐÏÔ¦Í ÍÏÖÎÁ ÂÕÌÏ\n"
+"צÄÎÏ×ÉÔÉ Ú ÄÉÓËÅÔÉ. äÕÖÅ ÒÅËÏÍÅÎÄÕ¤ÍÏ ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ ÃÉÍ ÒÅÖÉÍÏÍ. \n"
+"\n"
+"* çÏÔÏ×Ï: ð¦ÓÌÑ ÔÏÇÏ, ÑË ×É ×ÖÅ ÚÁ˦ÎÞÉÌÉ Ú ÐÅÒÅÒÏÚÐÏĦÌÏÍ ÷ÁÛÏÇÏ\n"
+"ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ, ÓËÏÒÉÓÔÁÊÔÅÓØ ÃÉÍ ÐÕÎËÔÏÍ, ÝÏ ÚÁÐÉÓÁÔÉ ÚͦÎÉ ÎÁ\n"
+"ÄÉÓË. \n"
+"\n"
+"ëÏÌÉ ÐÅ×ÎÉÊ Ð¦ÄÒÏÚÄ¦Ì ×ÉÂÒÁÎÏ, ÍÏÖÅÔÅ ÓËÏÒÉÓÔÕ×ÁÔÉÓØ ËÌÁצÛÁÍÉ:\n"
+"\n"
+" * Ctrl-c ÝÏ ÓÔ×ÏÒÉÔÉ ÎÏ×ÉÊ Ð¦ÄÒÏÚÄ¦Ì (ÑËÝÏ ×ÉÂÒÁÎÏ ÐÕÓÔÉÊ "
+"ЦÄÒÏÚĦÌ)\n"
+"\n"
+" * Ctrl-d ÝÏ ÓÔÅÒÔÉ Ð¦ÄÒÏÚĦÌ\n"
+"\n"
+" * Ctrl-m ÝÏ ×ÉÚÎÁÞÉÔÉ ÔÏÞËÕ ÍÏÎÔÕ×ÁÎÎÑ\n"
+"\n"
+"ñËÝÏ ×É ×ÓÔÁÎÏ×ÌÀ¤ÔÅ ÓÉÓÔÅÍÕ ÎÁ ËÏÍÐ'ÀÔÅÒ Ú ÐÒÏÃÅÓÏÒÏÍ PPC, ×É ÍÏÖÅÔÅ\n"
+"ÓÔ×ÏÒÉÔÉ ÍÁÌÅÎØËÉÊ Ð¦ÄÒÏÚÄ¦Ì ÔÉÐÕ HFS ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ 'bootstrap'\n"
+"(ÒÏÚͦÒÏÍ ÎÅ ÍÅÎÛÅ 1í ÄÌÑ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ yaboot. ñËÝÏ ×É ×ÉÒ¦ÛÉÔÅ\n"
+"ÓÔ×ÏÒÉÔÉ Ð¦ÄÒÏÚÄ¦Ì ÔÒÏÈÉ Â¦ÌØÛÏÇÏ ÒÏÚͦÒÕ (ÓËÁÖ¦ÍÏ 50íÂ, ×É ÚÍÏÖÅÔÅ\n"
+"ÔÁËÏÖ ÚÂÅÒ¦ÇÁÔÉ ÎÁ ÎØÏÍÕ ÒÅÚÅÒ×ÎÅ ÑÄÒÏ ÓÉÓÔÅÍÉ ÔÁ צÒÔÕÁÌØÎÉÊ ÄÉÓË ÄÌÑ\n"
+"Á×ÁÒ¦ÊÎÉÈ ÚÁ×ÁÎÔÁÖÅÎØ ÓÉÓÔÅÍÉ). "
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "óÁÕĦ×ÓØËÁ áÒÁצÑ"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "òÕÁÎÄÁ"
+msgid "There was an error installing packages:"
+msgstr "óÔÁÌÁÓÑ ÐÏÍÉÌËÁ Ð¦Ä ÞÁÓ ÕÓÔÁÎÏ×ËÉ ÐÁËÅÔ¦×: "
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Russia"
-msgstr "òÏÓ¦ÊÓØËÁ"
+msgid "Lexmark inkjet configuration"
+msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ¦ÎÔÅÒÎÅÔÕ"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Romania"
-msgstr "òÕÍÕΦÑ"
+msgid "Undo"
+msgstr "îÁÚÁÄ"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Reunion"
-msgstr "òÅΦÏÎ"
+msgid "Save partition table"
+msgstr "úÁÐÉÓÁÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Qatar"
-msgstr "ëÁÔÁÒ"
+msgid "Finnish"
+msgstr "æ¦ÎÓØËÁ"
#: ../../lang.pm:1
#, c-format
-msgid "Palau"
-msgstr "ðÁÌÁÕ"
+msgid "Macedonia"
+msgstr "íÁËÅÄÏΦÑ"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "ðÁÒÁÇ×ÁÊ"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Portugal"
-msgstr "ðÏÒÔÕÇÁ̦Ñ"
+msgid "Slovenian"
+msgstr "óÌÏ×ÅÎÓØËÁ"
#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Palestine"
-msgstr "úÂÅÒÅÇÔÉ ×ÉÂ¦Ò ÐÁËÅÔ¦×"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Puerto Rico"
-msgstr "ðÕÅÒÔÏò¦ËÏ"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Pitcairn"
-msgstr "ð¦ÔËÁÒÎ"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "ó×. ð'¤Ò ¦ í¦ËÅÌÏÎ"
+msgid "Libya"
+msgstr "ì¦ÂÅÒ¦Ñ"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Poland"
-msgstr "ðÏÌØÝÁ"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÓËÒÉÐÔ¦×, ÕÓÔÁÎÏ×ËÁ ÐÒÏÇÒÁÍ, ÓÔÁÒÔÕ×ÁÎÎÑ ÓÅÒ×ÅÒ¦×..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Pakistan"
-msgstr "ðÁ˦ÓÔÁÎ"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Philippines"
-msgstr "æ¦Ì¦Ð¦ÎÉ"
+msgid "Table"
+msgstr "ôÁÂÌÉÃÑ"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "ðÁÐÕÁ îÏ×Á çצÎÅÑ"
+msgid "I don't know how to format %s in type %s"
+msgstr "îÅ ÚÎÁÀ ÑË ÆÏÒÍÁÔÕ×ÁÔÉ %s ÔÉÐÕ %s"
-#: ../../lang.pm:1
-#, c-format
-msgid "French Polynesia"
-msgstr "æÒÁÎÃÕÚØËÁ ðÏ̦ÎÅÚ¦Ñ"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model"
+msgstr "íÏÄÕÌØ"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Peru"
-msgstr "ðÅÒÕ"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Panama"
-msgstr "ðÁÎÁÍÁ"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Stop Server"
+msgstr "óÅÒ×ÅÒ NIS"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Oman"
-msgstr "ïÍÅÎ"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "New Zealand"
-msgstr "îÏ×Á úÅÌÁÎĦÑ"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Modem"
+msgstr "íÏÄÕÌØ"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Niue"
-msgstr "î¦ÕÅ"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Nauru"
-msgstr "îÁÕÒÕ"
+msgid "Tuvalu"
+msgstr "ôÕ×ÁÌÕ"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Nepal"
-msgstr "îÅÐÁÌ"
+msgid "Use auto detection"
+msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "î¦ËÁÒÁÇÕÁ"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPM ÄÏÄÁ¤ ЦÄÔÒÉÍËÕ ÍÉÛËÉ ÄÏ ÔÅËÓÔÏ×ÉÈ ÐÒÏÇÒÁÍ Õ ì¦ÎÁËÓ¦, ÔÁËÉÈ ÑË,\n"
+"ÎÁÐÒÉËÌÁÄ, Midnight Commander. äÏÄÁ¤ ÔÁËÏÖ ÍÏÖÌÉ×ÏÓÔ¦ \"cut-and-paste\"\n"
+"ÄÏ ÐÒÏÇÒÁÍ, ÝÏ ÐÒÁÃÀÀÔØ ÎÁ ËÏÎÓÏ̦, ×ËÌÀÞÁÀÞÉ Ð¦ÄÔÒÉÍËÕ ÍÅÎÀ ÎÁ\n"
+"ËÏÎÓÏ̦."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Nigeria"
-msgstr "î¦ÇÅÒ¦Ñ"
+msgid "Started on boot"
+msgstr "óÔÁÒÔÕ×ÁÔÉ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Norfolk Island"
-msgstr "îÏÒÆÏÌËÓØ˦ ÏÓÔÒÏ×É"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Niger"
-msgstr "î¦ÇÅÒ"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "îÏ×Á ëÁÌÅÄÏΦÑ"
+msgid "Automatically find available printers on remote machines"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Namibia"
-msgstr "îÁͦ¦Ñ"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "íÏÚÁͦË"
+msgid "East Timor"
+msgstr "óȦÄÎÉÊ ô¦ÍÏÒ"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Malaysia"
-msgstr "íÁÌÁÚ¦Ñ"
+msgid "Del profile..."
+msgstr "óÔÅÒÔÉ ÐÒÏƦÌØ..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Mexico"
-msgstr "íÅËÓÉËÁ"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Malawi"
-msgstr "íÁÌÁצ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing Foomatic..."
+msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÕ %s"
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Maldives"
-msgstr "íÁÌØĦ×É"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr ""
+"âÕÄØ-ÌÁÓËÁ, ×ÉÊĦÔØ ¦Ú ÓÉÓÔÅÍÉ ¦ ÐÏÔ¦Í ÓËÏÒÉÓÔÕÊÔÅÓÑ Ctrl-Alt-BackSpace"
-#: ../../lang.pm:1
-#, c-format
-msgid "Mauritius"
-msgstr "íÁ×ÒÉ˦Ê"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "detected"
+msgstr "ÚÎÁÊÄÅÎÏ %s"
-#: ../../lang.pm:1
-#, c-format
-msgid "Malta"
-msgstr "íÁÌØÔÁ"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "ñ˦ ÐÁËÅÔÉ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Montserrat"
-msgstr "íÏÎÓÅÒÒÁÔ"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Package: "
+msgstr "÷ÉÂ¦Ò ÐÁËÅÔ¦×"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Mauritania"
-msgstr "íÁ×ÒÉÔÁΦÑ"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Martinique"
-msgstr "íÁÒԦΦËÁ"
+msgid "SECURITY WARNING!"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Northern Mariana Islands"
-msgstr "ð¦×ΦÞΦ íÁÒ¦ÁÎÓØ˦ ÏÓÔÒÏ×É"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "StarOffice"
+msgstr "ïƦÓÎÁ ÓÔÁÎæÑ"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Mongolia"
-msgstr "íÏÎÇÏ̦Ñ"
+msgid "No, I don't want autologin"
+msgstr "î¦, ÍÅΦ ÎÅ ÐÏÔÒ¦ÂÎÁ Á×ÔÏÍÁÔÉÞÎÁ ÒŤÓÔÒÁæÑ"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Myanmar"
-msgstr "íØÑÎÍÁÒ"
+msgid "Windows Migration tool"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Mali"
-msgstr "íÁ̦"
+#: ../../any.pm:1 ../../help.pm:1
+#, fuzzy, c-format
+msgid "All languages"
+msgstr "÷ÉÂÅÒ¦ÔØ ÍÏ×Õ"
-#: ../../lang.pm:1
-#, c-format
-msgid "Macedonia"
-msgstr "íÁËÅÄÏΦÑ"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Removing %s"
+msgstr "÷ÉÄÁÌÅÎÎÑ LPD..."
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Marshall Islands"
-msgstr "íÁÒÛÁÌÏצ ÏÓÔÒÏ×É"
+msgid "Testing your connection..."
+msgstr "÷ÉÐÒÏÂÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑ..."
-#: ../../lang.pm:1
-#, c-format
-msgid "Madagascar"
-msgstr "íÁÄÁÇÁÓËÁÒ"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cache size"
+msgstr "ÒÏÚÍ¦Ò Ä¦ÌÑÎËÉ"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Moldova"
-msgstr "íÏÌÄÁצÑ"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"ðÁÒÏ̦ ÔÅÐÅÒ ×ÍÉËÎÅΦ, ÁÌÅ ×ÓÅ ÏÄÎÏ ÎÅ ÒÅËÏÍÅÎÄÕ¤ÔØÓÑ ËÏÒÉÓÔÕ×ÁÔÉÓÑ\n"
+"ÃÉÍ ËÏÍÐ'ÀÔÅÒÏÍ × ÍÅÒÅÖ¦."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Monaco"
-msgstr "íÏÎÁËÏ"
+msgid "Start sector: "
+msgstr "ðÏÞÁÔÏË (ÓÅËÔÏÒ): "
#: ../../lang.pm:1
#, c-format
-msgid "Morocco"
-msgstr "íÁÒÏËÏ"
+msgid "Congo (Brazzaville)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, fuzzy, c-format
-msgid "Libya"
-msgstr "ì¦ÂÅÒ¦Ñ"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "ñ˦ ÐÁËÅÔÉ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ?"
#: ../../lang.pm:1
#, c-format
-msgid "Latvia"
-msgstr "ìÁÔצÑ"
+msgid "Seychelles"
+msgstr "óÅÊÛÅÌØÓØ˦ ÏÓÔÒÏ×É"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "ìÀËÓÅÍÂÕÒ­"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Lithuania"
-msgstr "ìÉÔ×Á"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Bad password on %s"
+msgstr "âÅÚ ÐÁÒÏÌÀ"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lesotho"
-msgstr "ìÅÓÏÔÏ"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Liberia"
-msgstr "ì¦ÂÅÒ¦Ñ"
+msgid "Zambia"
+msgstr "úÁͦÑ"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Sri Lanka"
-msgstr "ûÒ¦ ìÁÎËÁ"
+msgid "Security Administrator (login or email)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Liechtenstein"
-msgstr "ì¦ÈÔÅÎÛÔÅÊÎ"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "óÁÎÔÁ ìÀÞ¦Ñ"
+msgid "Romanian (qwerty)"
+msgstr "òÕÍÕÎÓØËÁ (qwerty)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lebanon"
-msgstr "ì¦×ÁÎ"
+msgid "Under Devel ... please wait."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Laos"
-msgstr ""
+msgid "Czech Republic"
+msgstr "þÅÛÓØËÁ ÒÅÓÐÕÂ̦ËÁ"
#: ../../lang.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "ëÁÚÁÈÓÔÁÎ"
+msgid "Egypt"
+msgstr "´­ÉÐÔ"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "ëÁÊÍÁÎÓØ˦ ÏÓÔÒÏ×É"
+msgid "Old configuration (isdn4net)"
+msgstr "óÔÁÒÁ ËÏÎƦ­ÕÒÁÃ¦Ñ (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "ëÕ×ÅÊÔ"
+msgid "Sound card"
+msgstr "ú×ÕËÏ×Á ÐÌÁÔÁ"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Korea"
-msgstr "ýÅ"
+msgid "Import Fonts"
+msgstr "æÏÒÍÁÔÕ×ÁÔÉ Ð¦ÄÒÏÚĦÌÉ"
-#: ../../lang.pm:1
-#, c-format
-msgid "Korea (North)"
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
msgstr ""
+"×É ÍÁ¤ÔÅ ÏÄÉÎ ×ÅÌÉËÉÊ ÄÉÓËÏ×ÉÊ \n"
+"ЦÄÒÏÚÄ¦Ì ÔÉÐÕ FAT (ÑËÉÊ × ÏÓÎÏ×ÎÏÍÕ\n"
+"×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÓÉÓÔÅÍÁÍÉ MicroSoft \n"
+"Dos/Windows). òÅËÏÍÅÎÄÏ×ÁÎÏ ÓÐÅÒÛÕ \n"
+"ÚÍÅÎÛÉÔÉ ÒÏÚÍ¦Ò ÃØÏÇÏ ÒÏÚĦÌÕ (ËÌÁÃΦÔØ \n"
+"ÎÁ ÎØÏÍÕ, ¦ ÐÏÔ¦Í ËÌÁÃΦÔØ ÎÁ \"úͦÎÉÔÉ ÒÏÚͦÒ\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "ó×. ë¦ÔÓ ¦ îÅצÓ"
+msgid "Suppress Temporary Files"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Comoros"
-msgstr "ëÏÍÏÒÓØ˦ ÏÓÔÒÏ×É"
+msgid "Change partition type"
+msgstr "úͦÎÉÔÉ ÔÉРЦÄÒÏÚĦÌÕ"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Kiribati"
-msgstr "ë¦Ò¦ÂÁÔ¦"
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Cambodia"
-msgstr "ëÁÍÂÏÄÖÁ"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Network Options"
+msgstr "ïÐæ§ ÍÏÄÕÌÑ:"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "ëÉÒÇÉÚÓÔÁÎ"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Kenya"
-msgstr "ëÅΦÑ"
+msgid "Statistics"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Japan"
-msgstr "ñÐÏΦÑ"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Jordan"
-msgstr "êÏÒÄÁΦÑ"
+msgid "(on %s)"
+msgstr "(ÎÁ %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Jamaica"
-msgstr "ñÍÁÊËÁ"
+msgid "MM Series"
+msgstr "ôÉÐÕ MM"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Iceland"
-msgstr "¶ÓÌÁÎĦÑ"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Iran"
-msgstr "¶ÒÁË"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Iraq"
-msgstr "¶ÒÁË"
+msgid "average"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "âÒÉÔÁÎÓØËÁ ÔÅÒÉÔÏÒ¦Ñ × ¶ÎĦÊÓØËÏÍÕ ÏËÅÁΦ"
+msgid "New printer name"
+msgstr "îÏ×Á ÎÁÚ×Á ÐÒÉÎÔÅÒÁ"
#: ../../lang.pm:1
#, c-format
-msgid "India"
-msgstr "¶ÎĦÑ"
+msgid "Equatorial Guinea"
+msgstr "åË×ÁÔÏÒ¦ÁÌØÎÁ çצÎÅÑ"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Israel"
-msgstr "¶ÚÒÁ¦ÌØ"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Ireland"
-msgstr "¶ÓÌÁÎÄÓØËÁ"
+msgid "Build Backup"
+msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Indonesia"
-msgstr "¶ÎÄÏÎÅÚ¦Ñ"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hungary"
-msgstr "õÇÏÒÝÉÎÁ"
+msgid "Currently, no alternative possibility is available"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Haiti"
-msgstr "çÁ¦Ô¦"
+msgid "Romanian (qwertz)"
+msgstr "òÕÍÕÎÓØËÁ (qwertz)"
-#: ../../lang.pm:1
-#, c-format
-msgid "Croatia"
-msgstr "èÏÒ×ÁÔ¦Ñ"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Write Config"
+msgstr "ÐÅÒÅÎÁÓÔÒϧÔÉ"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Honduras"
-msgstr "çÏÎÄÕÒÁÓ"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Heard and McDonald Islands"
-msgstr "èÅÒÄÓØ˦ ¦ íÁËäÏÎÁÌØÄÓØ˦ ÏÓÔÒÏ×É"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"äÅÍÏÎ routed ÄÁ¤ ÍÏÖÌÉצÓÔØ ËÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏÍÁÔÉÞÎÉÍ ÐÏÎÏ×ÌÅÎÎÑÍ\n"
+"ÔÁÂÌÉæ ÍÁÒÛÒÕÔÉÚÁæ§ IP ÚÁ ÄÏÐÏÍÏÇÏÀ ÐÒÏÔÏËÏÌÁ RIP. ðÒÏÔÏËÏÌ RIP\n"
+"ÛÉÒÏËÏ ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÎÁ ÎÅ×ÅÌÉËÉÈ ÍÅÒÅÖÁÈ, × ÔÏÊ ÞÁÓ, ÑË ÎÁ ¦ÌØÛ\n"
+"ÓËÌÁÄÎÉÈ ÎÅÏÂȦÄÎÅ ÚÁÓÔÏÓÕ×ÁÎÎÑ Â¦ÌØÛ ÒÏÚ×ÉÎÅÎÉÈ ÐÒÏÔÏËÏ̦×\n"
+"ÍÁÒÛÒÕÔÉÚÁæ§."
#: ../../lang.pm:1
#, c-format
-msgid "Hong Kong"
-msgstr "çÏέ ëÏέ"
+msgid "Kiribati"
+msgstr "ë¦Ò¦ÂÁÔ¦"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "China"
-msgstr "ëÉÔÁÊ"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Guyana"
-msgstr "½ÁÑÎÁ"
+msgid "Browse"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "çצÎÅÑ-â¦ÓÁÕ"
+msgid "CDROM"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Guam"
-msgstr "½ÕÁÍ"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "þÉ ÷É ÈÏÞÅÔÅ ÓÐÒÏÂÕ×ÁÔÉ Ð¦ÄËÌÀÞÉÔÉÓÑ ÄÏ ¦ÎÔÅÒÎÅÔÕ ÚÁÒÁÚ?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Guatemala"
-msgstr "½×ÁÔÅÍÁÌÁ"
+msgid "Belgian"
+msgstr "âÅÌØǦÊÓØËÁ"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "ð¦×ÄÅÎÁ äÖÏÒÄÖ¦Ñ ¦ ð¦×ÄÅΦ óÁÎÄצÞÓØ˦ ÏÓÔÒÏ×É"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Equatorial Guinea"
-msgstr "åË×ÁÔÏÒ¦ÁÌØÎÁ çצÎÅÑ"
+msgid "Do you have an ISA sound card?"
+msgstr "þÉ ×É ÍÁ¤ÔÅ ¦ÎÛ¦?"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Guadeloupe"
-msgstr "½×ÁÄÅÌÕÐÁ"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÓËÏÎƦ­ÕÒÏ×ÁÎÏÇÏ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦ ethernet. îÅ\n"
+"ÍÏÖÎÁ ×ÓÔÁÎÏ×ÉÔÉ Ú'¤ÄÎÁÎÎÑ ÃØÏÇÏ ÔÉÐÕ."
-#: ../../lang.pm:1
-#, c-format
-msgid "Guinea"
-msgstr "½×¦ÎÅÑ"
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "Windows"
+msgstr "äÏÍÅÎ NIS"
-#: ../../lang.pm:1
-#, c-format
-msgid "Gambia"
-msgstr "½ÁͦÑ"
+#: ../../common.pm:1
+#, fuzzy, c-format
+msgid "Can't make screenshots before partitioning"
+msgstr "îÅ ÍÏÖÕ ÄÏÄÁÔÉ ÖÏÄÎÏÇÏ Ð¦ÄÒÏÚĦÌÕ"
-#: ../../lang.pm:1
-#, c-format
-msgid "Greenland"
-msgstr "½ÒÅÎÌÁÎĦÑ"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Host Name"
+msgstr "îÁÚ×Á ÈÏÓÔÁ"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Gibraltar"
-msgstr "½¦ÂÒÁÌÔÁÒ"
+msgid "/File/Save _As"
+msgstr "/æÁÊÌ/úͦÎÉÔÉ _ÎÁÚ×Õ"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ghana"
-msgstr "½ÁÎÁ"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "French Guiana"
-msgstr "æÒÁÎÃÕÚØËÁ ½ÁÑÎÁ"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Georgia"
-msgstr "çÒÕÚ¦Ñ"
+msgid "Delay before booting default image"
+msgstr "ðÁÕÚÁ ÐÅÒÅÄ ÚÁ×ÁÎÔÁÖÅÎÎÑÍ ÏÓÎÏ×Îϧ ÓÉÓÔÅÍÉ"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Grenada"
-msgstr "½ÒÅÎÁÄÁ"
+msgid "Restrict command line options"
+msgstr "ïÂÍÅÖÉÔÉ ÏÐæ§ ËÏÍÁÎÄÎÏÇÏ ÒÑÄËÁ"
-#: ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "United Kingdom"
-msgstr "ïÂ'¤ÄÎÁÎÅ ëÏÒÏ̦×ÓÔ×Ï"
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "East Europe"
+msgstr "´×ÒÏÐÁ"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Gabon"
-msgstr "½ÁÂÏÎ"
+msgid "Use free space"
+msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ×¦ÌØÎÉÊ ÐÒÏÓÔ¦Ò"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Faroe Islands"
-msgstr "æÁÒÅÒÓØ˦ ÏÓÔÒÏ×É"
+msgid "use dhcp"
+msgstr "ËÏÒÉÓÔÕ×ÁÔÉÓÑ dhcp"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Micronesia"
-msgstr "í¦ËÒÏÎÅÚ¦Ñ"
+msgid "Mail alert"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "æÏÌËÌÅÎÄÓØ˦ ÏÓÔÒÏ×É (íÁÌØצÎÓØ˦)"
+msgid "Internet configuration"
+msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ¦ÎÔÅÒÎÅÔÕ"
#: ../../lang.pm:1
#, c-format
-msgid "Fiji"
-msgstr "æ¦ÄÖ¦"
+msgid "Uzbekistan"
+msgstr "õÚÂÅËÉÓÔÁÎ"
-#: ../../lang.pm:1
-#, c-format
-msgid "Finland"
-msgstr "æ¦ÎÌÑÎĦÑ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Detected %s"
+msgstr "ÚÎÁÊÄÅÎÏ %s"
-#: ../../lang.pm:1
-#, c-format
-msgid "Ethiopia"
-msgstr "åƦÏЦÑ"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _printers"
+msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "Spain"
-msgstr "¶ÓÐÁΦÑ"
+msgid "Finish"
+msgstr "úÁ˦ÎÞÉÔÉ"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Eritrea"
-msgstr "åÒ¦ÔÒÅÁ"
+msgid "Show automatically selected packages"
+msgstr "ðÏËÁÚÕ×ÁÔÉ Á×ÔÏÍÁÔÉÞÎÏ ×ÉÂÒÁΦ ÐÁËÅÔÉ"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Western Sahara"
-msgstr "úÁȦÄÎÁ óÁÈÁÒÁ"
+msgid "CPU flags reported by the kernel"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Egypt"
-msgstr "´­ÉÐÔ"
+msgid "Togo"
+msgstr "ôÏÇÏ"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Estonia"
-msgstr "åÓÔÏΦÑ"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Ecuador"
-msgstr "åË×ÁÄÏÒ"
+msgid "16 MB"
+msgstr "16 íÂ"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Algeria"
-msgstr "áÌÇÅÒ¦Ñ"
+msgid "Please try again"
+msgstr "âÕÄØ-ÌÁÓËÁ, ÓÐÒÏÂÕÊÔÅ ÝÅ ÒÁÚ"
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominican Republic"
-msgstr "äÏͦΦËÁÎÓØËÁ ÒÅÓÐÕÂ̦ËÁ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The model is correct"
+msgstr "÷ÓŠצÒÎÏ?"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Dominica"
-msgstr "äÏͦΦËÁ"
+msgid "FAT resizing failed: %s"
+msgstr "á×ÔÏÍÁÔÉÞÎÁ ÚͦÎÁ ÒÏÚͦÒÕ FAT ÎÅ ÓÐÒÁÃÀ×ÁÌÁ: %s"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Denmark"
-msgstr "äÁΦÑ"
+msgid "Individual package selection"
+msgstr "¶ÎÄÉצÄÕÌØÎÉÊ ×ÉÂ¦Ò ÐÁËÅÔ¦×"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "äÖÉÂÕÔ¦"
+msgid "This partition is not resizeable"
+msgstr "òÏÚÍ¦Ò ÃØÏÇÏ Ð¦ÄÒÏÚĦÌÕ ÎÅÍÏÖÌÉ×Ï ÚͦÎÉÔÉ"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Cyprus"
-msgstr "ë¦ÐÒ"
+msgid "Location"
+msgstr "òÏÚÔÁÛÕ×ÁÎÎÑ"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Christmas Island"
-msgstr "ò¦ÚÄ×Á ÏÓÔÒ¦×"
+msgid "USA (cable-hrc)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Cape Verde"
-msgstr "ïÓÔÒÏ×É úÅÌÅÎÏÇÏ íÉÓÕ"
+msgid "Journalised FS"
+msgstr "öÕÒÎÁÌØÎÁ ÆÁÊÌÏ×Á ÓÉÓÔÅÍÁ"
#: ../../lang.pm:1
#, c-format
-msgid "Cuba"
-msgstr "ëÕÂÁ"
+msgid "Guatemala"
+msgstr "½×ÁÔÅÍÁÌÁ"
-#: ../../lang.pm:1
-#, c-format
-msgid "Colombia"
-msgstr "ëÏÌÕͦÑ"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "This machine"
+msgstr "(ÎÁ Ã¦Ê ÍÁÛÉΦ)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cameroon"
-msgstr "ëÁÍÅÒÕÎ"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "ì¦ÔÅÒÁ × äïó¦: %s (ÐÒÉÐÕÝÅÎÎÑ)\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Chile"
-msgstr "þ¦Ì¦"
+msgid "Select the files or directories and click on 'OK'"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Cook Islands"
-msgstr "ëÕËÁ ÏÓÔÒÏ×É"
+msgid "Bahrain"
+msgstr "âÁÈÒÅÊÎ"
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "ëÏÉ Ä'¶×ÕÁÒ"
+msgid "omit scsi modules"
+msgstr "ÐÒÏÐÕÓËÁÔÉ ÍÏÄÕ̦ scsi"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Switzerland"
-msgstr "û×ÅÊÃÁÒ¦Ñ"
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
msgstr ""
+"þÅÒÅÚ ÔÅ, ÝÏ ×É ÒÏÂÉÔÅ ÕÓÔÁÎÏ×ËÕ ÐÏ ÍÅÒÅÖ¦, ×ÁÛÁ ÍÅÒÅÖÁ ×ÖÅ\n"
+"ÓËÏÎƦ­ÕÒÏ×ÁÎÁ. \n"
+"\n"
+"îÁÔÉÓΦÔØ ÎÁ çÁÒÁÚÄ ÝÏ ÚÂÅÒÅÇÔÉ ÕÓÔÁÎÏ×ËÉ ÍÅÒÅÖ¦, ÁÂÏ ÎÁ ÷¦ÄͦÎÉÔÉ\n"
+"ÄÌÑ ÔÏÇÏ, ÝÏ ÚͦÎÉÔÉ ÕÓÔÁÎÏ×ËÉ Ú'¤ÄÎÁÎÎÑ ¦ÎÔÅÒÎÅÔÁ ¦ ÍÅÒÅÖ¦.\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Central African Republic"
-msgstr "ãÅÎÔÒÁÌØÎÁ áÆÒÉËÁÎÓØËÁ òÅÓÐÕÂ̦ËÁ"
+msgid "Keyboard layout: %s\n"
+msgstr "òÏÚËÌÁÄËÁ ËÌÁצÁÔÕÒÉ: %s\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "ëÏËÏÓÏצ ÏÓÔÒÏ×É"
+msgid "Maltese (US)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Canada"
-msgstr "ëÁÎÁÄÁ"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"íÏÎÔÕ¤ ÔÁ ÒÏÚÍÏÎÔÏ×Õ¤ ×Ó¦ ÆÁÊÌÏצ ÓÉÓÔÅÍÉ ÔÉÐÕ Network File System\n"
+"(NFS), SMB (Lan Manager/Windows) ÔÁ NCP (NetWare)."
-#: ../../lang.pm:1
-#, c-format
-msgid "Belize"
-msgstr "âÅ̦Ú"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Tvcard"
+msgstr "ôÅÌÅצڦÊÎÁ ÐÌÁÔÁ"
-#: ../../lang.pm:1
-#, c-format
-msgid "Belarus"
-msgstr "â¦ÌÏÒÕÓØ"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "åËÓÐÅÒÔ > ú×ÉÞÁÊÎÉÊ"
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Botswana"
-msgstr "âÏÔÓ×ÁÎÁ"
+msgid "Size"
+msgstr "òÏÚͦÒ"
-#: ../../lang.pm:1
-#, c-format
-msgid "Bouvet Island"
-msgstr "âÕ×Å"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "½Â"
#: ../../lang.pm:1
#, c-format
-msgid "Bhutan"
-msgstr "âÕÔÁÎ"
+msgid "Greenland"
+msgstr "½ÒÅÎÌÁÎĦÑ"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Bahamas"
-msgstr "âÁÇÁÍÉ"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Brazil"
-msgstr "âÒÁÚÉ̦Ñ"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Bolivia"
-msgstr "âÏ̦צÑ"
+msgid ""
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
+msgstr ""
+"õÓÔÁÎÏ×ËÁ ÓЦÌØÎÏÇÏ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÖÅ\n"
+"ÚÒÏÂÌÅÎÁ. óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ × ÄÁÎÉÊ ÍÏÍÅÎÔ ÄÏÚ×ÏÌÅÎÅ.\n"
+"\n"
+"ýÏ ÷É ÂÁÖÁ¤ÔÅ ÚÒÏÂÉÔÉ?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Brunei Darussalam"
-msgstr "âÒÕÎÅÊÓØËÉÊ äÁÒÕÓÓÁÌÁÍ"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete All NBIs"
+msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
-#: ../../lang.pm:1
-#, c-format
-msgid "Bermuda"
-msgstr "âÅÒÍÕÄÉ"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
+"LILO ¦ GRUB - ÃÅ ÚÁ×ÁÎÔÁÖÕ×ÁÞ¦ ÓÉÓÔÅÍÉ ÄÌÑ GNU/Linux. ãÅÊ ËÒÏË Ú×ÉÞÎÏ\n"
+"ÐÏ×ΦÓÔÀ Á×ÔÏÍÁÔÉÚÏ×ÁÎÉÊ. æÁËÔÉÞÎÏ, drakX ÐÒÏ×ÅÄÅ ÁÎÁ̦Ú\n"
+"ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÏÇÏ ÓÅËÔÏÒÁ ÄÉÓËÕ ¦ ÂÕÄŠĦÑÔÉ ×¦ÄÐÏצÄÎÏ ÄÏ ÔÏÇÏ, ÝÏ ×\n"
+"ÎØÏÍÕ ×ÉÑ×ÉÔØÓÑ:\n"
+"\n"
+" * ÑËÝÏ ÔÕÔ ÐÒÉÓÕÔÎ¦Ê ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÉÊ ÓÅËÔÏÒ Windows, צΠÚÁͦÎÉÔØ\n"
+"ÊÏÇÏ ÎÁ ÓÅËÔÏÒ GRUB/LILO ÔÁËÉÍ ÞÉÎÏÍ, ÝÏ ÷É ÍÏÇÌÉ ÓÔÁÒÔÕ×ÁÔÉ ÏÂϤ - ¦\n"
+"GNU/Linux, ¦ Windows;\n"
+"\n"
+" * ÑËÝÏ ÚÎÁÊÄÅÎÉÊ ÂÌÏË ×¦Ä GRUB ÞÉ LILO, צΠÂÕÄÅ ÚÁͦÎÅÎÉÊ ÎÁ ÎÏ×ÉÊ. \n"
+"\n"
+"ñËÝÏ ÓÉÔÕÁÃ¦Ñ ÎÅ ÔÁËÁ Þ¦ÔËÁ, drakX ÚÁÐÒÏÐÏÎÕ¤ ÷ÁÍ ×ÉÂ¦Ò Ú Ë¦ÌØËÏÍÁ\n"
+"ÍÏÖÌÉ×ÉÍÉ ×ÉÈÏÄÁÍÉ. \n"
+"\n"
+" * ñËÉÊ ÚÁ×ÁÎÔÁÖÕ×ÁÞ ×ÖÉ×ÁÔÉ: ÷É ÍÁ¤ÔÅ ÔÒÉ ×ÁÒ¦ÁÎÔÉ ÎÁ ×ɦÒ:\n"
+" \n"
+" * LILO Ú ÇÒÁƦÞÎÉÍ ÍÅÎÀ: ÑËÝÏ ÷É ÎÁÄÁ¤ÔÅ ÐÅÒÅ×ÁÇÕ LILO Ú ÊÏÇÏ\n"
+" ÇÒÁƦÞÎÏÀ ÏÂÏÌÏÎËÏÀ.\n"
+"\n"
+" * Grub: ÑËÝÏ ÷ÁÍ ÐÏÄÏÂÁ¤ÔØÓÑ Grub (Ú ÔÅËÓÔÏ×ÉÍ ÍÅÎÀ).\n"
+"\n"
+" * LILO Ú ÔÅËÓÔÏ×ÉÍ ÍÅÎÀ: ÑËÝÏ ÷ÁÍ ÐÏÄÏÂÁ¤ÔØÓÑ LILO Ú ÔÅËÓÔÏ×ÉÍ\n"
+" ÍÅÎÀ.\n"
+"\n"
+" * ðÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÅÎÎÑ: Õ Â¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦× ÷ÁÍ ÎÅ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ\n"
+"ÚͦÎÀ×ÁÔÉ ÎÅÑ×ÎÏ ×ÓÔÁÎÏ×ÌÅÎÉÊ ÄÉÓË (/dev/hda), ÁÌÅ ÑËÝÏ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ,\n"
+"÷É ÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÚÁ×ÁÎÔÁÖÕ×ÁÞ ÎÁ ÄÒÕÇÏÍÕ ÖÏÒÓÔËÏÍÕ ÄÉÓËÕ\n"
+"(/dev/hdb) ÞÉ ÎÁצÔØ ÎÁ ÄÉÓËÅÔ¦ (/de/fd0). \n"
+"\n"
+" * úÁÔÒÉÍËÁ ÐÅÒÅÄ ÚÁ×ÁÎÔÁÖÅÎÎÑÍ ÏÓÎÏ×ÎÏÇÏ ÑÄÒÁ: ÃÅ ÚÁÔÒÉÍËÁ ÐÒÉ\n"
+"ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ, ÑËÁ ÎÁÄÁ¤ÔØÓÑ ËÏÒÉÓÔÕ×ÁÞÅצ, ÝÏ צΠÍÁ×\n"
+"ÍÏÖÌÉצÓÔØ ×ÉÂÒÁÔÉ ¦ÎÛÉÊ ÐÕÎËÔ × ÍÅÎÀ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ.\n"
+"\n"
+"!! âÕÄØÔÅ Õ×ÁÖÎÉÍÉ: ÑËÝÏ ÷É ÎÁÔÉÓÎÅÔÅ ËÎÏÐËÕ \"÷¦ÄͦÎÉÔÉ\" (¦ ÔÉÍ ÓÁÍÉÍ\n"
+"×ËÁÖÅÔÅ ÐÒÏÇÒÁͦ ÎÅ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ ÓÉÓÔÅÍÎÏÇÏ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ),\n"
+"ÐÅÒÅÓצÄÞ¦ÔØÓÑ, ÝÏ ÷É ÍÁ¤ÔÅ Õ ÚÁÐÁÓ¦ ÍÅÔÏÄ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ\n"
+"íÁÎÄÒÅÊË ì¦ÎÁËÓ! âÕÄØÔÅ ÔÁËÏÖ ÐÅ×ÎÉÍÉ, ÝÏ ÷É ÄÏÂÒÅ ÚÎÁ¤ÔÅ, ÝÏ ÷É\n"
+"ÒÏÂÉÔÉ, ËÏÌÉ ÷É ÚͦÎÀ¤ÔÅ ÂÕÄØ-Ñ˦ ÐÁÒÁÍÅÔÒÉ ÔÕÔ!!\n"
+"\n"
+"îÁÔÉÓÎÕ×ÛÉ ËÎÏÐËÕ \"äÏÄÁÔËÏ×Ï\" × ÃØÏÍÕ ×¦ËΦ, ÷É ÏÔÒÉÍÁ¤ÔÅ ÄÏÓÔÕÐ ÄÏ\n"
+"ÂÁÇÁÔØÏÈ ÄÏÄÁÔËÏ×ÉÈ ËÏÎƦ­ÕÒÁæÊÎÉÈ ÐÁÒÁÍÅÔÒ¦× ÐÒÉÚÎÁÞÅÎÉÈ ÄÌÑ\n"
+"ÄÏÓצÄÞÅÎÉÈ ËÏÒÉÓÔÕ×ÁÞ¦×.\n"
+"\n"
+"íÁÎÄÒÅÊË ì¦ÎÁËÓ ×ÓÔÁÎÏ×ÌÀ¤ Ó×¦Ê ×ÌÁÓÎÉÊ ÓÉÓÔÅÍÎÉÊ ÚÁ×ÁÎÔÁÖÕ×ÁÞ, ÑËÉÊ\n"
+"ÄÏÚ×ÏÌÉÔØ ÷ÁÍ ÚÁ×ÁÎÔÁÖÕ×ÁÔÉ ÁÂÏ GNU/Linux, ÁÂÏ ÂÕÄØ-ÑËÕ ¦ÎÛÕ\n"
+"ÏÐÅÒÁæÊÎÕ ÓÉÓÔÅÍÕ, ×ÓÔÁÎÏ×ÌÅÎÕ ÎÁ Ã¦Ê ÍÁÛÉΦ.\n"
+"\n"
+"ñËÝÏ ÎÁ ÍÁÛÉΦ ×ÓÔÁÎÏ×ÌÅÎÁ ¦ÎÛÁ ÏÐÅÒÁæÊÎÁ ÓÉÓÔÅÍÁ, ×ÏÎÁ Á×ÔÏÍÁÔÉÞÎÏ\n"
+"ÂÕÄÅ ÄÏÄÁÎÁ ÄÏ ÓÐÉÓËÕ ÓÉÓÔÅÍ × ÍÅÎÀ. ôÕÔ ÍÏÖÎÁ ÚͦÎÉÔÉ ¦ÓÎÕÀÞ¦\n"
+"ÐÁÒÁÍÅÔÒÉ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ËÏÖÎϧ ÓÉÓÔÅÍÉ. ðÏÄצÊÎÅ ËÌÁÃÁÎÎÑ ÎÁ ÐÕÎËÔ¦\n"
+"ÍÅÎÀ ÄÏÚ×ÏÌÉÔØ ÷ÁÍ ÚͦÎÉÔÉ ¦ÓÎÕÀÞ¦ ÐÁÒÁÍÅÔÒÉ, ÁÂÏ ÓÔÅÒÔÉ ÄÁÎÉÊ ÐÕÎËÔ\n"
+"ÍÅÎÀ. \"äÏÄÁÔÉ\" ÓÔ×ÏÒÀÖ ÎÏ×ÉÊ ÐÕÎËÔ. ¶ \"úÁ˦ÎÞÅÎÏ\" ÐÅÒÅÈÏÄÉÔØ ÎÁ\n"
+"ÎÁÓÔÕÐÎÉÊ ËÒÏË ÕÓÔÁÎÏ×ËÉ."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Benin"
-msgstr "âÅΦÎ"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Burundi"
-msgstr "âÕÒÕÎĦ"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "ñËÕ ËÏÎƦÇÕÒÁæÀ XFree ×É ÈÏÞÅÔÅ ÍÁÔÉ?"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bahrain"
-msgstr "âÁÈÒÅÊÎ"
+msgid "More"
+msgstr "ýÅ"
-#: ../../lang.pm:1
-#, c-format
-msgid "Bulgaria"
-msgstr "âÏÌÇÁÒ¦Ñ"
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"îÁ ÃØÏÍÕ Ò¦×Φ ÂÅÚÐÅËÉ ÓÉÓÔÅÍÕ ÍÏÖÎÁ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ × ÑËÏÓÔ¦ ÓÅÒ×ÅÒÁ.\n"
+"ò¦×ÅÎØ ÂÅÚÐÅËÉ ÄÌÑ Ã¦¤§ ÓÉÓÔÅÍÉ ÔÅÐÅÒ ÄÏÓÔÁÔÎ¦Ê ÄÌÑ ÔÏÇÏ, ÝÏÂ\n"
+"×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ §§ ÑË ÓÅÒ×ÅÒ, ÝÏ ÄÏÐÕÓËÁ¤ ЦÄ'¤ÄÎÁÎÎÑ ÄÏ ÎØÏÇÏ\n"
+"ÂÁÇÁÔØÏÈ Ë̦¤ÎÔ¦×."
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Burkina Faso"
-msgstr "âÕÒ˦ÎÁ æÁÓÏ"
+msgid "Account Password"
+msgstr "ðÁÒÏÌØ Õ ÐÒÏ×ÁÊÄÅÒÁ"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bangladesh"
-msgstr "âÁÎÇÌÁÄÅÛ"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Barbados"
-msgstr "âÁÒÂÁÄÏÓ"
+msgid "Tajik keyboard"
+msgstr "ôÁÄÖÉÃØËÁ ËÌÁצÁÔÕÒÁ"
-#: ../../lang.pm:1
-#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "âÏÓÎ¦Ñ ÔÁ çÅÒÃÅÇÏ×ÉÎÁ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
+"ëÏÎƦ­ÕÒÁæÀ, ÝÏ ÂÕÌÁ ЦÄÇÏÔÏ×ÁÎÁ ÄÌÑ ÞÅÒÇÉ %s ÷É ÍÏÖÅÔÅ ÓËÏЦÀ×ÁÔÉ\n"
+"äÌÑ ÄÁÎϧ ÕÓÔÁÎÏ×ËÉ ÞÅÒÇÉ ÄÒÕËÕ (%s). ÷Ó¦ ÕÓÔÁÎÏ×ÏÞΦ ÄÁΦ (ÎÁÚ×Á\n"
+"ÐÒÉÎÔÅÒÁ, ÏÐÉÓ, ÒÏÚÔÁÛÕ×ÁÎÎÑ, ÔÉÐ Ú'¤ÄÎÁÎÎÑ ¦ ÓÔÁÎÄÁÒÔΦ ÕÓÔÁÎÏ×ËÉ)\n"
+"ÂÕÄÕÔØ ÐÅÒÅÎÅÓÅΦ ÎÁ ÎÏ×Õ ËÏÎƦ­ÕÒÁæÀ. áÌÅ ÒÏÂÏÔÉ Ú ÞÅÒÇÉ ÐÅÒÅÎÅÓÅÎÏ\n"
+"ÎÅ ÂÕÄÅ. îÅ ×Ó¦ ÞÅÒÇÉ ÍÏÖÕÔØ ÂÕÔÉ ÐÅÒÅÎÅÓÅÎÉÍÉ Ú ÔÁËÉÈ ÐÒÉÞÉÎ: \n"
-#: ../../lang.pm:1
-#, c-format
-msgid "Azerbaijan"
-msgstr "áÚÅÊÂÁÒÖÁÎ"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Font List"
+msgstr "ôÏÞËÁ ÍÏÎÔÕ×ÁÎÎÑ"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Aruba"
-msgstr "áÒÕÂÁ"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
+"íÏÖÌÉ×Ï ×ÁÍ ÐÏÔÒ¦ÂÎÏ ÚͦÎÉÔÉ ÐÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÅÎÎÑ Õ Open Firmware ÄÌÑ\n"
+"ÔÏÇÏ, ÝÏ ÄÏÚ×ÏÌÉÔÉ ÒÏÂÏÔÕ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ. ñËÝÏ ×É ÎÅ ÂÁÞÉÔÅ ÚÁÐÒÏÛÅÎÎÑ\n"
+"ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ, ÎÁÔÉÓΦÔØ Command-Option-O-F\n"
+"ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ¦ ××ÅĦÔØ setenv boot-device %s,\\\\:tbxi. ð¦ÓÌÑ\n"
+"ÃØÏÇÏ ÎÁÄÒÕËÕÊÔÅ shut-down. ðÒÉ ÎÁÓÔÕÐÎÏÍÕ ÚÁ×ÁÎÔÁÖÅÎΦ ×É ÐÏÂÁÞÉÔÅ\n"
+"ЦÄËÁÚËÕ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ. "
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Australia"
-msgstr "ÐÏÓ̦ÄÏ×ÎÉÊ"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"úÄÁ¤ÔØÓÑ Õ ÷ÁÓ ÍÁÛÉÎÁ OldWorld ÞÉ îÅצÄÏÍÁ. úÁ×ÁÎÔÁÖÕ×ÁÞ yaboot ÎÅ\n"
+"ÂÕÄÅ ÐÒÁÃÀ×ÁÔÉ Ú Ã¦¤À ÍÁÛÉÎÏÀ. õÓÔÁÎÏ×ËÁ ÂÕÄÅ ÐÒÏÄÏ×ÖÕ×ÁÔÉÓØ, ÁÌÅ ÄÌÑ\n"
+"ÚÁ×ÁÎÔÁÖÅÎÎÑ, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ËÏÒÉÓÔÕ×ÁÔÉÓØ BootX."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "áÍÅÒÉËÁÎÓØËÁ óÁÍÏÁ"
+msgid "Select file"
+msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Argentina"
-msgstr "áÒÇÅÎÔÉÎÁ"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "áÎÔÁÒËÔÉËÁ"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Angola"
-msgstr "áÎÇÏÌÁ"
+msgid "Japan"
+msgstr "ñÐÏΦÑ"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print option list"
+msgstr "ïÐæ§ ÐÒÉÎÔÅÒÁ"
+
+#: ../../standalone/localedrake:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "çÏÌÁÎÄÓØ˦ áÎÔÉÌØÓØ˦ ÏÓÔÒÏ×É"
+msgid "The change is done, but to be effective you must logout"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Search servers"
+msgstr "óÅÒ×ÅÒ DNS"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Armenia"
-msgstr "÷¦ÒÍÅΦÑ"
+msgid "NCP queue name missing!"
+msgstr "îÅÍÁ¤ ÎÁÚ×É ÞÅÒÇÉ NCP!"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Albania"
-msgstr "áÌÂÁΦÑ"
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "áÎǦÌØÑ"
+msgid "Cd-Rom labeled \"%s\""
+msgstr "ëÏÍÐÁËÔ-ÄÉÓË Ú ÅÔÉËÅÔËÏÀ \"%s\""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "áÎÔÉÇÕÁ ÔÁ âÁÒÂÕÄÁ"
+msgid ""
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
+msgstr ""
+"úÂÅÒ¦ÇÁ¤ ¦ צÄÎÏ×ÌÀ¤ ÄÖÅÒÅÌÏ ÅÎÔÒÏЦ§ × ÓÉÓÔÅͦ, ÔÉÍ ÓÁÍÉÍ Ð¦Ä×ÉÝÕÀÞÉ\n"
+"Ñ˦ÓÔØ ­ÅÎÅÒÁæ§ ×ÉÐÁÄËÏ×ÉÈ ÞÉÓÅÌ."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "ïÂ'¤ÄÎÁΦ áÒÁÂÓØ˦ åͦÒÁÔÉ"
+msgid ""
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Andorra"
-msgstr "áÎÄÏÒÁ"
+msgid "Turn your computer into a reliable server"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Afghanistan"
-msgstr "áÆÇÁΦÓÔÁÎ"
+msgid " (driver %s)"
+msgstr " (%s ÄÒÁÊ×ÅÒ)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid ""
+"Loopback file(s):\n"
+" %s\n"
+msgstr ""
+"æÁÊÌ(É) Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ: \n"
+" %s\n"
-#: ../../loopback.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Circular mounts %s\n"
-msgstr "ëÒÕÇÏצ ÔÏÞËÉ ÍÏÎÔÕ×ÁÎÎÑ %s\n"
+msgid "I don't know"
+msgstr "îÅ ÚÎÁÀ"
-#: ../../lvm.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "óÐÏÞÁÔËÕ Ú¦ÔÒ¦ÔØ ÌÏǦÞÎÉÊ ÔÏÍ\n"
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ""
-#: ../../modules.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
+"÷É ÍÏÖÅÔÅ ÚÁÒÁÚ ÎÁÓÔÒϧÔÉ ÄÉÓËÅÔÕ ÄÌÑ Á×ÔÏÍÁÔÉÚÏ×ÁÎϧ ÕÓÔÁÎÏËÉ. ãÅÊ\n"
+"ÒÅÖÉÍ ÕÓÔÁÎÏ×ËÉ ÄÅÝÏ ÎÅÂÅÚÐÅÞÎÉÊ ¦ ÎÉÍ ÔÒÅÂÁ ËÏÒÉÓÔÕ×ÁÔÉÓÑ\n"
+"ÐÏͦÒËÏ×ÁÎÏ.\n"
+"\n"
+"ëÏÒÉÓÔÕÀÞÉÓØ ÃÉÍ ÒÅÖÉÍÏÍ ÷É ÍÏÖÅÔÅ ÐÏ×ÔÏÒÉÔÉ ÕÓÔÁÎÏ×ËÕ, ÝÏ ÷É\n"
+"Ô¦ÌØËÉ-ÝÏ ×ÉËÏÎÁÌÉ ÎÁ ÄÁÎ¦Ê ÓÉÓÔÅͦ. îÁ ÄÅÑËÉÈ ÅÔÁÐÁÈ ÷ÁÍ ÂÕÄÕÔØ\n"
+"ÚÁÄÁΦ ÚÁÐÉÔÁÎÎÑ, ÝÏ ÚͦÎÉÔÉ ÚÎÁÞÅÎÎÑ Ë¦ÌØËÏÈ ÚͦÎÎÉÈ.\n"
+"\n"
+"äÌÑ ÷ÁÛϧ ÂÅÚÐÅËÉ, ÐÏÄ¦Ì ÄÉÓËÕ ÎÁ ЦÄÒÏÚĦÌÉ ¦ ÆÏÒÍÁÔÕ×ÁÎÎÑ Î¦ËÏÌÉ ÎÅ\n"
+"ÂÕÄÅ ×ÉËÏÎÕ×ÁÔÉÓØ Á×ÔÏÍÁÔÉÞÎÏ ÎÅÚÁÌÅÖÎÏ ×¦Ä ÔÏÇÏ, ÝÏ ×ÉÂÒÁÎÏ ÐÒÉ\n"
+"ÕÓÔÁÎÏ×æ.\n"
+"\n"
+"èÏÞÅÔÅ ÐÒÏÄÏ×ÖÕ×ÁÔÉ? "
-#: ../../mouse.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "ðïóõîøôå ëïì¶ýáôëï!"
+msgid ""
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "ýÏ ÁËÔÉצÚÕ×ÁÔÉ ÍÉÛËÕ, "
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Uninstall"
+msgstr "÷ÉÊÔÉ Ú ÕÓÔÁÎÏ×ËÉ"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Please test the mouse"
-msgstr "÷ÉÐÒÏÂÕÊÔÅ ÍÉÛËÕ, ÂÕÄØ-ÌÁÓËÁ"
+msgid " ("
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "No mouse"
-msgstr "âÅÚ ÍÉÛËÉ"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cpuid level"
+msgstr "÷ÓÔÁÎÏ×ÌÅÎÎÑ Ò¦×ÎÑ ÂÅÚÐÅËÉ"
-#: ../../mouse.pm:1
-#, c-format
-msgid "none"
-msgstr "î¦ÞÏÇÏ"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Mongolian (cyrillic)"
+msgstr "óÅÒÂÓØËÁ (ËÉÒÉÌÉÃÑ)"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "3 buttons"
-msgstr "ôÒØÏÈ ËÎÏÐÏÞÎÁ"
+msgid "Add a module"
+msgstr "äÏÄÁÔÉ ÍÏÄÕÌØ"
-#: ../../mouse.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "2 buttons"
-msgstr "ä×ÏÈ ËÎÏÐÏÞÎÁ"
+msgid "Profile to delete:"
+msgstr "ðÒÏƦÌØ ÄÌÑ ÓÔÉÒÁÎÎÑ:"
-#: ../../mouse.pm:1
-#, c-format
-msgid "1 button"
-msgstr "ïÄÎÏ ËÎÏÐÏÞÎÁ"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Local measure"
+msgstr "ìÏËÁÌØΦ ÆÁÊÌÉ"
#: ../../mouse.pm:1
#, c-format
msgid "busmouse"
msgstr "busmouse"
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "Account Login (user name)"
+msgstr "òÁÈÕÎÏË ËÏÒÉÓÔÕ×ÁÞÁ (¦Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ)"
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serial, ÔÉÐ C7)"
+msgid "Fdiv bug"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "MM Series"
-msgstr "ôÉÐÕ MM"
+msgid "Benin"
+msgstr "âÅΦÎ"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Uruguay"
+msgstr "õÒÕÇ×ÁÊ"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Path selection"
+msgstr "úÂÅÒÅÇÔÉ ×ÉÂ¦Ò ÐÁËÅÔ¦×"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "ôÉÐÕ Logitech CC"
+msgid "Name/IP address of host:"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Monitor: %s\n"
+msgstr "íÏΦÔÏÒ: %s\n"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+#: ../../partition_table/raw.pm:1
+#, fuzzy, c-format
+msgid ""
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
+msgstr ""
+"ýÏÓØ ÎÅÄÏÂÒŠצÄÂÕ×Á¤ÔØÓÑ ÎÁ ×ÁÛÏÍÕ ÄÉÓËÕ.\n"
+"ôÅÓÔÕ×ÁÎÎÑ Ã¦Ì¦ÓÎÏÓÔ¦ ÄÁÎÉÈ ÂÕÌÏ ÎÅ×ÄÁÌÉÍ.\n"
+"ãÅ ÏÚÎÁÞÁ¤, ÝÏ ÚÁÐÉÓ ÂÕÄØ-ÞÏÇÏ ÎÁ ÄÉÓË ÍÁÔÉÍÅ ÓÕÍÎÉÊ ÒÅÚÕÌØÔÁÔ."
-#: ../../mouse.pm:1
-#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer host name or IP missing!"
+msgstr "îÅÍÁ¤ ÎÁÚ×É ÈÏÓÔÁ ÐÒÉÎÔÅÒÁ!"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "ú×ÉÞÁÊÎÁ 3È ËÎÏÐÏÞÎÁ ÍÉÛËÁ"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check all users that you want to include in your backup."
+msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "ú×ÉÞÁÊÎÁ 2È ËÎÏÐÏÞÎÁ ÍÉÛËÁ"
+msgid ""
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "serial"
-msgstr "ÐÏÓ̦ÄÏ×ÎÉÊ"
-
-#: ../../mouse.pm:1
-#, fuzzy, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft IntelliMouse"
+msgid "Bangladesh"
+msgstr "âÁÎÇÌÁÄÅÛ"
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Wheel"
-msgstr "ëÏ̦ÝÁÔËÏ"
+msgid "Japan (cable)"
+msgstr ""
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic"
-msgstr "úÁÇÁÌØÎÅ"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Initial tests"
+msgstr "ðÏצÄÏÍÌÅÎÎÑ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
-#: ../../mouse.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "Continue"
+msgstr "ðÒÏÄÏ×ÖÕ×ÁÔÉ"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "ú×ÉÞÁÊÎÉÊ ÔÉÐ PS2 ÍÉÛ¦ Ú ËÏ̦ÝÁÔËÏÍ"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Custom Restore"
+msgstr "óÐÅæÁÌØÎÉÊ"
-#: ../../mouse.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid ""
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
+msgstr ""
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Standard"
-msgstr "óÔÁÎÄÁÒÔÎÉÊ"
+msgid "Script-based"
+msgstr "úÁ ÄÏÐÏÍÏÇÏÀ ÓËÒÉÐÔÁ"
-#: ../../mouse.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "íÉÛÁ Sun"
+msgid "Error reading file %s"
+msgstr "ðÏÍÉÌËÁ ÐÒÉ ÞÉÔÁÎΦ ÆÁÊÌÁ %s"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "PLL setting:"
+msgstr "ÆÏÒÍÁÔÕ×ÁÎÎÑ"
+
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "ðÅÒÅÍÉËÎÕÔÉ Í¦Ö ÐÏËÁÚÏÍ ÐÏ ÇÒÕÐÁÍ ¦ Ú×ÉÞÁÊÎÉÍ ÓÐÉÓËÏÍ"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "÷É ÐÏ×ÉÎΦ ÍÁÔÉ FAT ЦÄÒÏÚÄ¦Ì ÚÍÏÎÔÏ×ÁÎÉÊ × /boot/efi "
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Collapse Tree"
-msgstr "óÔÉÓÎÕÔÉ ÄÅÒÅ×Ï"
+msgid " on "
+msgstr ""
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Expand Tree"
-msgstr "òÏÚÛÉÒÉÔÉ ÄÅÒÅ×Ï"
+msgid "The URL must begin with http:// or https://"
+msgstr ""
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Info"
-msgstr "¶ÎÆÏÒÍÁæÑ"
+msgid ""
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
+msgstr ""
+"íÏÖÎÁ ×ËÁÚÁÔÉ ÂÅÚÐÏÓÅÒÅÄÎØÏ URI ÄÌÑ ÄÏÓÔÕÐÕ ÄÏ ÐÒÉÎÔÅÒÁ. URI ÍÁ¤\n"
+"צÄÐÏצÄÁÔÉ ÓÐÅÃÉƦËÁæÑÍ ÁÂÏ CUPS ÁÂÏ Foomatic. úÁÕ×ÁÖÔÅ, ÏÄÎÁË, ÝÏ\n"
+"ÎÅ ×Ó¦ ÔÉÐÉ URI ЦÄÔÒÉÍÕÀÔØÓÑ ÚÁÓÏÂÁÍÉ ËÅÒÕ×ÁÎÎÑ ÞÅÒÇ ÄÒÕËÕ."
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Is this correct?"
-msgstr "÷ÓŠצÒÎÏ?"
+msgid "Other OS (SunOS...)"
+msgstr "¶ÎÛ¦ ÓÉÓÔÅÍÉ (SunOS...)"
-#: ../../my_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "Install/Upgrade"
+msgstr "÷ÓÔÁÎÏ×ÉÔÉ/ðÏÎÏ×ÉÔÉ"
-#: ../../partition_table.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Error writing to file %s"
-msgstr "ðÏÍÉÌËÁ ÐÒÉ ÚÁÐÉÓ¦ Õ ÆÁÊÌ %s"
+msgid "%d packages"
+msgstr "%d ÐÁËÅÔÉ"
-#: ../../partition_table.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Bad backup file"
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
+msgid ""
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Backup and Restore application\n"
+"\n"
+"--default : save default directories.\n"
+"--debug : show all debug messages.\n"
+"--show-conf : list of files or directories to backup.\n"
+"--config-info : explain configuration file options (for non-X "
+"users).\n"
+"--daemon : use daemon configuration. \n"
+"--help : show this message.\n"
+"--version : show version number.\n"
+msgstr ""
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "÷¦ÄÎÏ×ÌÅÎÎÑ Ú ÆÁÊÌÕ %s ÎÅ ÓÐÒÁÃÀ×ÁÌÏ: %s"
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain Authentication Required"
+msgstr "á×ÔÅÎÔÉËÁæÑ"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"\n"
+"\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-"õ ÷ÁÓ ¤ ÐÒÏͦÖÏË × ÔÁÂÌÉæ ÒÏÚĦ̦×, ÁÌÅ Ñ ÎÅ ÍÏÖÕ ÎÉÍ ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ.\n"
-"´ÄÉÎÉÍ Ò¦ÛÅÎÎÑÍ ÍÏÖÅ ÂÕÔÉ ÐÅÒÅÓÕÎÕÔÉ ÷ÁÛ¦ ÏÓÎÏ×Φ ЦÄÒÏÚĦÌÉ ÔÁË, ÝÏÂ\n"
-"ÐÒÏͦÖÏË ÂÕ× ÐÏÒÕÞ Ú ÒÏÚÛÉÒÅÎÉÍÉ Ð¦ÄÒÏÚĦÌÁÍÉ."
-#: ../../partition_table.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "òÏÚÛÉÒÅΦ ЦÄÒÏÚĦÌÉ ÎŠЦÄÔÒÉÍÕÀÔØÓÑ ÎÁ Ã¦Ê ÐÌÁÔÆÏÒͦ."
+msgid "Costa Rica"
+msgstr "ëÏÓÔÁ-ò¦ËÁ"
-#: ../../partition_table.pm:1
-#, c-format
-msgid "mount failed: "
-msgstr "ÐÏÍÉÌËÁ ÍÏÎÔÕ×ÁÎÎÑ: "
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Use libsafe for servers"
+msgstr "÷ÉÂÅÒ¦ÔØ ÐÁÒÁÍÅÔÒÉ ÄÌÑ ÓÅÒ×ÅÒÁ"
-#: ../../pkgs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "maybe"
-msgstr "ÍÏÖÌÉ×Ï"
+msgid "Icelandic"
+msgstr "¶ÓÌÁÎÄÓØËÁ"
-#: ../../pkgs.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "nice"
-msgstr "ÇÁÒÎÏ"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
-#: ../../pkgs.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "very nice"
-msgstr "ÄÕÖÅ ÇÁÒÎÉÊ"
+msgid "Please relog into %s to activate the changes"
+msgstr "úÁÒŤÓÔÒÕÊÔÅÓÑ, ÂÕÄØ-ÌÁÓËÁ, ÝÅ ÒÁÚ Õ %s ÝÏ ÐÒÉ×ÅÓÔÉ Õ Ä¦À ÚͦÎÉ"
-#: ../../pkgs.pm:1
-#, c-format
-msgid "important"
-msgstr "×ÁÖÌÉ×ÉÊ"
+#: ../../my_gtk.pm:1
+#, fuzzy, c-format
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "must have"
-msgstr "ÐÏÔÒ¦ÂÎÉÊ"
+msgid "Lilo/grub mode"
+msgstr "òÅÖÉÍ Lilo/grub"
-#: ../../raid.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "îÅÄÏÓÔÁÔÎØÏ Ð¦ÄÒÏÚÄ¦Ì¦× ÄÌÑ RAID Ò¦×ÎÑ %d\n"
+msgid "Output"
+msgstr "÷ÉȦÄ"
-#: ../../raid.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "ÚÂ¦Ê Õ mkraid"
+msgid "Circular mounts %s\n"
+msgstr "ëÒÕÇÏצ ÔÏÞËÉ ÍÏÎÔÕ×ÁÎÎÑ %s\n"
-#: ../../raid.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "ÚÂ¦Ê Õ mkraid (ÍÏÖÌÉ×Ï ÎÅ ×ÓÔÁÎÏ×ÌÅΦ raidtools?)"
+msgid "Martinique"
+msgstr "íÁÒԦΦËÁ"
-#: ../../raid.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "îÅ ÍÏÖÕ ÄÏÄÁÔÉ Ð¦ÄÒÏÚÄ¦Ì ÄÏ _ÆÏÒÍÁÔÏ×ÁÎÏÇÏ_ RAID md%d"
+msgid "HardDrive / NFS"
+msgstr ""
-#: ../../services.pm:1
+#: ../../modules/parameters.pm:1
#, fuzzy, c-format
-msgid "Stop"
-msgstr "óÅËÔÏÒ"
+msgid "a number"
+msgstr "îÏÍÅÒ ÔÅÌÅÆÏÎÕ"
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Start"
-msgstr "óÔÁÔÕÓ"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Swedish"
+msgstr "û×ÅÄÓØËÁ"
-#: ../../services.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "On boot"
-msgstr "ðÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
+msgid "Which %s driver should I try?"
+msgstr "ñËÉÊ ÄÒÁÊ×ÅÒ %s ÍÅΦ ÓÐÒÏÂÕ×ÁÔÉ?"
-#: ../../services.pm:1
+#: ../../standalone/logdrake:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"You will receive an alert if one of the selected services is no longer "
+"running"
msgstr ""
-"÷ÉÂÁÞÔÅ, ÎÅÍÁ¤ ÄÏÄÁÔËÏ×ϧ \n"
-"¦ÎÆÏÒÍÁæ§ ÐÒÏ ÃÅÊ ÓÅÒצÓ."
-#: ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Services and deamons"
-msgstr "óÅÒצÓÉ ÔÁ ÄÅÍÏÎÉ"
+msgid "Filesystem types:"
+msgstr "ôÉÐÉ ÆÁÊÌÏ×ÉÈ ÓÉÓÔÅÍ:"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "stopped"
-msgstr "ÚÕÐÉÎÅÎÏ"
+msgid ", multi-function device on HP JetDirect"
+msgstr ""
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "running"
-msgstr "ÐÒÁÃÀÀ"
+msgid "Northern Mariana Islands"
+msgstr "ð¦×ΦÞΦ íÁÒ¦ÁÎÓØ˦ ÏÓÔÒÏ×É"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"÷ÉÂÅÒ¦ÔØ, Ñ˦ ÓÅÒצÓÉ ÍÁÀÔØ ÓÔÁÒÔÕ×ÁÔÉ Á×ÔÏÍÁÔÉÞÎÏ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ"
+msgid "none"
+msgstr "î¦ÞÏÇÏ"
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Database Server"
-msgstr "âÁÚÁ ÄÁÎÉÈ"
+msgid "user :"
+msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Remote Administration"
-msgstr "ïÐæ§ צÄÄÁÌÅÎÏÇÏ ÐÒÉÎÔÅÒÁ"
+msgid "Please enter your password"
+msgstr "âÕÄØ-ÌÁÓËÁ, ÓÐÒÏÂÕÊÔÅ ÝÅ ÒÁÚ"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "File sharing"
+msgid ""
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
+"îÁÚ×Á ÐÒÏƦÌÀ ÄÌÑ ÓÔ×ÏÒÅÎÎÑ (ÎÏ×ÉÊ ÐÒÏƦÌØ ÓÔ×ÏÒÀ¤ÔØÓÑ ÑË ËÏÐ¦Ñ ×ÖÅ "
+"¦ÓÎÕÀÞÏÇÏ):"
-#: ../../services.pm:1
-#, c-format
-msgid "Internet"
-msgstr "¶ÎÔÅÒÎÅÔ"
-
-#: ../../services.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Printing"
-msgstr "äÒÕË"
-
-#: ../../services.pm:1
-#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"óÔÁÒÔÕ¤ ÔÁ ÚÕÐÉÎѤ ÓÅÒ×ÅÒ ÛÒÉÆÔ¦× ÄÌÑ X (ÏÂÏ×'ÑÚËÏ×Å ÄÌÑ ÒÏÂÏÔÉ\n"
-"ÓÅÒ×ÅÒÁ XFree)."
+msgid "Floppy"
+msgstr "úÁÐÉÓÁÔÉ ÎÁ ÄÉÓËÅÔÕ"
-#: ../../services.pm:1
-#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "úÁ×ÁÎÔÁÖÉÔÉ ÄÒÁÊ×ÅÒÉ ÄÌÑ ÐÒÉÓÔÒÏ§× usb."
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "ëÌÁÃΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁ ЦÄÒÏÚĦ̦"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+msgid "Ghostscript referencing"
msgstr ""
-"syslog - ÃÅ ÓÅÒ×¦Ó × ÓÉÓÔÅͦ, ÚÁ ÄÏÐÏÍÏÇÏÀ ÑËÏÇÏ ÄÅÍÏÎÉ ÚÁÐÉÓÕÀÔØ\n"
-"ÓÉÓÔÅÍΦ ÐÏצÄÏÍÌÅÎÎÑ Õ Ò¦ÚΦ ÓÉÓÔÅÍΦ ÆÁÊÌÉ ÒŤÓÔÒÁæ§ ÐÏצÄÏÍÌÅÎØ. ÷\n"
-"ÂÕÄØ-ÑË¦Ê ÓÉÓÔÅͦ ÎÅÐÏÇÁÎÏ ÍÁÔÉ syslog."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "úÁÐÕÓË Ú×ÕËÏ×ϧ ÓÉÓÔÅÍÉ ÎÁ ×ÁÛ¦Ê ÍÁÛÉΦ"
-#: ../../services.pm:1
-#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"ðÒÏÔÏËÏÌ rwho ×ÉÄÁ¤ ËÏÒÉÓÔÕ×ÁÞÁÍ ÎÁ צÄÄÁÌÅÎÉÈ ÓÉÓÔÅÍÁÈ ¦ÎÆÏÒÍÁæÀ ÐÒÏ\n"
-"×Ó¦È ËÏÒÉÓÔÕ×ÁÞ¦× ÚÁÒŤÓÔÒÏ×ÁÎÉÈ × ÓÉÓÔÅͦ, ÑËÁ ÍÁ¤ ÄÅÍÏÎ rwho\n"
-"(ÐÏĦÂÎÉÊ ÄÏ ÄÅÍÏÎÁ finger)."
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Bootloader"
+msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÚÁ×ÁÎÔÁÖÕ×ÁÞ"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"ðÒÏÔÏËÏÌ rusers ÄÁ¤ ÍÏÖÌÉצÓÔØ ËÏÒÉÓÔÕ×ÁÞÁÍ × ÍÅÒÅÖ¦ ÏÔÒÉÍÕ×ÁÔÉ\n"
-"¦ÎÆÏÒÍÁæÀ ÐÒÏ ÔÅ, ÈÔÏ Ú ËÏÒÉÓÔÕ×ÁÞ¦× ÚÁÒŤÓÔÒÏ×ÁÎÉÊ ÎÁ ÓÉÓÔÅÍÁÈ, ÝÏ\n"
-"צÄÐÏצÄÁÀÔØ ÎÁ ÚÁÐÉÔÉ."
+msgid "Move"
+msgstr "ðÅÒÅͦÓÔÉÔÉ"
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"ðÒÏÔÏËÏÌ rstat ÄÁ¤ ÍÏÖÌÉצÓÔØ ËÏÒÉÓÔÕ×ÁÞÁÍ × ÍÅÒÅÖ¦ ÏÔÒÉÍÕ×ÁÔÉ ÄÁΦ\n"
-"ÐÒÏ ÚÁ×ÁÎÔÁÎÎÑ ÂÕÄØ-ÑËÏÇÏ ËÏÍÐ'ÀÔÅÒÁ × Ã¦Ê ÍÅÒÅÖ¦."
+msgid "Bootloader to use"
+msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÚÁ×ÁÎÔÁÖÕ×ÁÞ"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"äÅÍÏÎ routed ÄÁ¤ ÍÏÖÌÉצÓÔØ ËÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏÍÁÔÉÞÎÉÍ ÐÏÎÏ×ÌÅÎÎÑÍ\n"
-"ÔÁÂÌÉæ ÍÁÒÛÒÕÔÉÚÁæ§ IP ÚÁ ÄÏÐÏÍÏÇÏÀ ÐÒÏÔÏËÏÌÁ RIP. ðÒÏÔÏËÏÌ RIP\n"
-"ÛÉÒÏËÏ ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÎÁ ÎÅ×ÅÌÉËÉÈ ÍÅÒÅÖÁÈ, × ÔÏÊ ÞÁÓ, ÑË ÎÁ ¦ÌØÛ\n"
-"ÓËÌÁÄÎÉÈ ÎÅÏÂȦÄÎÅ ÚÁÓÔÏÓÕ×ÁÎÎÑ Â¦ÌØÛ ÒÏÚ×ÉÎÅÎÉÈ ÐÒÏÔÏËÏ̦×\n"
-"ÍÁÒÛÒÕÔÉÚÁæ§."
+msgid "SMB server host"
+msgstr "îÁÚ×Á ÈÏÓÔÁ SMB ÓÅÒ×ÅÒÁ"
-#: ../../services.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"ðÏÓÔÁ×ÉÔÉ \"ÓÉÒ¦\" ÆÁÊÌÉ ÓÐÅæÁÌØÎÉÈ ÐÒÉÓÔÒÏ§× Õ ×¦ÄÐÏצÄΦÓÔØ ÄÏ\n"
-"ÂÌÏÞÎÉÈ ÐÒÉÓÔÒÏ§× (ÑË, ÎÁÐÒÉËÌÁÄ, ЦÄÒÏÚĦÌÉ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ) ÄÌÑ\n"
-"×ÉËÏÒÉÓÔÁÎÎÑ × ÐÒÏÇÒÁÍÁÈ ÐÏĦÂÎÉÈ ÄÏ Oracle."
+msgid "Name Servers:"
+msgstr "óÅÒ×ÅÒ NIS"
-#: ../../services.pm:1
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
msgstr ""
-"úÂÅÒ¦ÇÁ¤ ¦ צÄÎÏ×ÌÀ¤ ÄÖÅÒÅÌÏ ÅÎÔÒÏЦ§ × ÓÉÓÔÅͦ, ÔÉÍ ÓÁÍÉÍ Ð¦Ä×ÉÝÕÀÞÉ\n"
-"Ñ˦ÓÔØ ­ÅÎÅÒÁæ§ ×ÉÐÁÄËÏ×ÉÈ ÞÉÓÅÌ."
+"\n"
+"âÕÄØ ÌÁÓËÁ, Õ×ÁÖÎÏ ÐÒÏÞÉÔÁÊÔÅ ÕÍÏ×É ÐÏÄÁΦ ÄÁ̦. ñËÝÏ ×É ÎÅ\n"
+"ÐÏÇÏÄÖÕ¤ÔÅÓØ Ú ÂÕÄØ-ÑËÏÀ ÞÁÓÔÉÎÏÀ, ×ÁÍ ÎÅ ÄÏÚ×ÏÌѤÔØÓÑ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ\n"
+"ÎÁÓÔÕÐÎÉÊ ËÏÍÐÁËÔ-ÄÉÓË. îÁÔÉÓΦÔØ ÎÁ ÷¦ÄÍÏ×ÉÔÉÓÑ ÄÌÑ ÔÏÇÏ, ÝÏÂ\n"
+"ÐÒÏÄÏ×ÖÉÔÉ ÕÓÔÁÎÏ×ËÕ ÂÅÚ ×ÉËÏÒÉÓÔÁÎÎÑ ÃØÏÇÏ ÎÏÓ¦Ñ.\n"
+"\n"
+"äÅÑ˦ ËÏÍÐÏÎÅÎÔÉ ÎÁ ÎÁÓÔÕÐÎÏÍÕ ËÏÍÐÁËÔ-ÄÉÓËÕ ÎÅ ËÅÒÕÀÔØÓÑ Ì¦ÃÅÎÚ¦¤À\n"
+"GPL ÞÉ ÐÏĦÂÎÏÀ ÄÏ Îŧ. ÷ ÔÁËÏÍÕ ×ÉÐÁÄËÕ ËÏÖÅÎ ¦Ú ËÏÍÐÏÎÅÎÔ¦×\n"
+"ËÅÒÕ¤ÔØÓÑ Ó×ϤÀ ÓÐÅÃÉƦÞÎÏÀ ̦ÃÅÎÚ¦¤À. âÕÄØ ÌÁÓËÁ, ÐÒÏÞÉÔÁÊÔÅ Õ×ÁÖÎÏ ¦\n"
+"ÄÏÔÒÉÍÕÊÔÅÓØ ÕÍÏ× ÔÁËϧ ÓÐÅÃÉƦÞÎϧ ̦ÃÅÎÚ¦§ ÐÅÒÛ, Î¦Ö ËÏÒÉÓÔÕ×ÁÔÉÓÑ\n"
+"ÁÂÏ ÐÅÒÅÒÏÚÐÏ×ÓÀÄÖÕ×ÁÔÉ ÔÁËÕ ËÏÍÐÏÎÅÎÔÕ. ôÁ˦ ̦ÃÅÎÚ¦§ Õ Â¦ÌØÛÏÓÔ¦\n"
+"×ÉÐÁÄË¦× ÚÁÂÏÒÏÎÑÀÔØ ÐÅÒÅÄÁÞÕ, ËÏЦÀ×ÁÎÎÑ (ËÒ¦Í ÓÔ×ÏÒÅÎÎÑ ÒÅÚÅÒ×Îϧ\n"
+"ËÏЦ§), ÐÅÒÅÒÏÚÐÏ×ÓÀÄÖÅÎÎÑ, Ú×ÏÒÏÔÎÀ ¦ÎÖÅÎÅÒ¦À, ÄÅ-ÁÓÅÍÂÌÀ×ÁÎÎÑ,\n"
+"ÄÅ-ËÏÍЦÌÑæÀ ÞÉ ÍÏÄÉƦËÁæÀ ËÏÍÐÏÎÅÎÔÉ. âÕÄØ-ÑËÅ ÐÏÒÕÛÅÎÎÑ Ì¦ÃÅÎÚ¦§\n"
+"ÎÅÇÁÊÎÏ ÐÒÉÐÉÎѤ ×ÁÛ¦ ÐÒÁ×Á ÝÏÄÏ ËÏÍÐÏÎÅÎÔÉ. ñËÝÏ ÓÐÅÃÉƦÞÎÏ ÎÅ\n"
+"×ËÁÚÁÎÏ ÐÒÏ ÎÁÄÁÎÎÑ ÔÁËÉÈ ÐÒÁ×, ×É ÎÅ ÍÁ¤ÔÅ ÐÒÁ×Á ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ Ã¦\n"
+"ÐÒÏÇÒÁÍÉ ÎÁ ¦ÌØÛ, Î¦Ö ÏÄÎ¦Ê ÓÉÓÔÅͦ, ÁÂÏ ÐÒÉÓÔÏÓÏ×Õ×ÁÔÉ §È ÄÌÑ\n"
+"ÕÓÔÁÎÏ×ËÉ × ÍÅÒÅÖ¦. ñËÝÏ ×É ÍÁ¤ÔÅ ÓÕÍΦ×É ÝÏÄÏ Ì¦ÃÅÎÚ¦§, Ú×ÅÒΦÔØÓÑ\n"
+"ÂÅÚÐÏÓÅÒÅÄÎØÏ ÄÏ ÄÉÓÔÒÉÂ'ÀÔÏÒÁ ÞÉ ÒÅÄÁËÔÏÒÁ ÔÁËϧ ËÏÍÐÏÎÅÎÔÉ. ðÅÒÅÄÁÞÁ\n"
+"ÔÁËÉÈ ËÏÍÐÏÎÅÎÔ (×ËÌÀÞÁÀÞÉ ÄÏËÕÍÅÎÔÁæÀ) ÔÒÅÔ¦Í ÏÓÏÂÁÍ Õ Â¦ÌØÛÏÓÔ¦\n"
+"×ÉÐÁÄË¦× ÚÁÂÏÒÏÎÅÎÁ. \n"
+"\n"
+"÷Ó¦ Á×ÔÏÒÓØ˦ ÐÒÁ×Á ËÏÍÐÏÎÅÎÔ ÎÁ ÎÁÓÔÕÐÎÏÍÕ ËÏÍÐÁËÔ-ÄÉÓËÕ ÚÁÓÔÅÒÅÖÅΦ\n"
+"ÚÁ §È צÄÐÏצÄÎÉÍÉ Á×ÔÏÒÁÍÉ ¦ ÚÁÈÉÝÁÀÔØÓÑ ÚÁËÏÎÁÍÉ ÐÒÏ ÏÈÏÒÏÎÕ\n"
+"Á×ÔÏÒÓØËÉÈ ÐÒÁ×, Ñ˦ ÍÁÀÔØ ÐÒÁ×Ï ÚÁÓÔÏÓÏ×Õ×ÁÔÉÓÑ ÄÏ ÐÒÏÇÒÁÍÎÉÈ\n"
+"ÐÒÏÄÕËÔ¦×.\n"
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
msgstr ""
-"Postfix - ÃÅ ÐÒÏÇÒÁÍÁ ÄÌÑ ÐÅÒÅÄÁÞ¦ ÅÌÅËÔÒÏÎÎϧ ÐÏÛÔÉ (Mail Transport\n"
-"Agent), ÑËÁ ÐÅÒÅÄÁ¤ ÐÏÛÔÏצ ÐÏצÄÏÍÌÅÎÎÑ ×¦Ä ÏÄÎÏÇÏ ËÏÍÐ'ÀÔÅÒÁ ÄÏ\n"
-"¦ÎÛÏÇÏ."
#: ../../services.pm:1
#, c-format
msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"portmapper ËÅÒÕ¤ Ú'¤ÄÎÁÎÎÑÍÉ Ú ÐÒÏÔÏËÏÌÏÍ RPC, Ñ˦ ×ÉËÏÒÉÓÔÏ×ÕÀÔØÓÑ\n"
-"ÔÁËÉÍÉ ÐÒÏÔÏËÏÌÁÍÉ, ÑË NFS ÔÁ NIS. portmaper ÐÏ×ÉÎÅÎ ÐÒÁÃÀ×ÁÔÉ ÎÁ\n"
-"ÍÁÛÉÎÁÈ, Ñ˦ ¤ ÓÅÒ×ÅÒÁÍÉ ÄÌÑ ÐÒÏÔÏËÏ̦×, ÝÏ ËÏÒÉÓÔÕÀÔØÓÑ RPC."
+"Linux Virtual Server ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÄÌÑ ÐÏÂÕÄÏ×É ×ÉÓÏËÏÎÁĦÊÎÏÇÏ\n"
+"ÓÅÒ×ÅÒÁ Ú ×ÉÓÏËÏÀ ÐÒÏÄÕËÔÉ×ΦÓÔÀ."
-#: ../../services.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA ЦÄÔÒÉÍËÁ ÐÏÔÒ¦ÂÎÁ × ÏÓÎÏ×ÎÏÍÕ ÄÌÑ ÚÁÂÅÚÐÅÞÅÎÎÑ ÒÏÂÏÔÉ ÔÁËÉÈ\n"
-"ÒÅÞÅÊ, ÑË ethernet ÔÁ ÍÏÄÅÍ × ÐÅÒÅÎÏÓÎÉÈ ËÏÍÐ'ÀÔÅÒÁÈ. ðÁËÅÔ ÎÅ ÐÏÞÎÅ\n"
-"ÐÒÁÃÀ×ÁÔÉ, ÑËÝÏ ÊÏÇÏ ÎÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ. ïÔÖÅ, ÊÏÇÏ ÂÅÚÐÅÞÎÏ\n"
-"×ÓÔÁÎÏ×ÌÀ×ÁÔÉ ÎÁ ËÏÍÐ'ÀÔÅÒÁÈ, ÎÁצÔØ ÑËÝÏ ×¦Î ÎÅ ÂÕÄÅ\n"
-"×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ."
+msgid "4 billion colors (32 bits)"
+msgstr "4 ͦÌØÊÑÒÄÉ ËÏÌØÏÒ¦× (32 ¦Ô)"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "ð¦ÄÔÒÉÍËÁ ÄÌÑ OKI 4w ¦ ÐÏĦÂÎÉÈ win ÐÒÉÎÔÅÒ¦×."
+msgid "Micronesia"
+msgstr "í¦ËÒÏÎÅÚ¦Ñ"
-#: ../../services.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
+msgid "License"
msgstr ""
-"á×ÔÏÍÁÔÉÞÎÏ ×ËÌÀÞÉÔÉ NumLock ÎÁ ËÏÎÓÏ̦ ¦ × XFree \n"
-"ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
+msgid "This may take a moment to generate the keys."
msgstr ""
-"NFS - ÃÅ ÄÕÖÅ ÐÏÐÕÌÑÒÎÉÊ ÐÒÏÔÏËÏÌ ÄÌÑ ÓЦÌØÎÏÇÏ ×ÉËÏÒÉÓÔÁÎÎÑ ÆÁÊÌ¦× ÎÁ\n"
-"ËÏÍÐ'ÀÔÅÒÁÈ, Ú'¤ÄÎÁÎÉÈ ÍÅÒÅÖÅÀ TCP/IP. ãÅÊ ÓÅÒ×¦Ó ÚÁÂÅÚÐÅÞÕ¤\n"
-"ÍÏÖÌÉצÓÔØ ËÏÒÉÓÔÕ×ÁÎÎÑ ÚÁÍÉËÁÎÎÑÍ ÆÁÊ̦×."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
msgstr ""
-"NFS - ÃÅ ÄÕÖÅ ÐÏÐÕÌÑÒÎÉÊ ÐÒÏÔÏËÏÌ ÄÌÑ ÓЦÌØÎÏÇÏ ×ÉËÏÒÉÓÔÁÎÎÑ ÆÁÊÌ¦× ÎÁ\n"
-"ËÏÍÐ'ÀÔÅÒÁÈ, Ú'¤ÄÎÁÎÉÈ ÍÅÒÅÖÅÀ TCP/IP. ãÅÊ ÓÅÒ×¦Ó ÚÁÂÅÚÐÅÞÕ¤ NFS\n"
-"ÓÅÒ×ÅÒ, ÑËÉÊ ËÏÎƦ­ÕÒÕ¤ÔØÓÑ ÚÁ ÄÏÐÏÍÏÇÏÀ ÆÁÊÌÁ /etc/exports."
-#: ../../services.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
+msgid "Sagem (using pppoa) usb"
msgstr ""
-"áËÔÉצÚÕ¤ ÔÁ ÄÅÁËÔÉצÚÕ¤ ×Ó¦ ¦ÎÔÅÒÆÅÊÓÉ ÍÅÒÅÖ¦, Ñ˦ ÎÁÓÔÒϤΦ\n"
-"ÓÔÁÒÔÕ×ÁÔÉ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ."
-#: ../../services.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
-"íÏÎÔÕ¤ ÔÁ ÒÏÚÍÏÎÔÏ×Õ¤ ×Ó¦ ÆÁÊÌÏצ ÓÉÓÔÅÍÉ ÔÉÐÕ Network File System\n"
-"(NFS), SMB (Lan Manager/Windows) ÔÁ NCP (NetWare)."
+"óÔÁÌÁÓÑ ÐÏÍÉÌËÁ - ÎÅ ÚÎÁÊÄÅÎÏ ×¦ÄÐÏצÄÎÉÈ ÄÉÓË¦× ÄÌÑ ÓÔ×ÏÒÅÎÎÑ ÎÏ×ÉÈÆÁÊÌÏ×ÉÈ "
+"ÓÉÓÔÅÍ. ðÅÒÅצÒÔÅ ÂÕÄØ-ÌÁÓËÁ Ó×ÏÀ ÓÉÓÔÅÍÕ ¦ ÓÐÒÏÂÕÊÔÅצÄÛÕËÁÔÉ ÐÒÉÞÉÎÕ ÃØÏÇÏ."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) - ÃÅ óÅÒ×ÅÒ îÁÚ× äÏÍÅÎ¦× (Domain Name Server, DNS), ÑËÉÊ\n"
-"ÓÌÕÖÉÔØ ÄÌÑ ×ÉÚÎÁÞÅÎÎÑ ÎÁÚ× ÈÏÓÔ¦× ÚÁ IP ÁÄÒÅÓÁÍÉ ÔÁ ÎÁ×ÐÁËÉ."
+msgid "Starting the printing system at boot time"
+msgstr "ñËÕ ÓÉÓÔÅÍÕ ÄÒÕËÕ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ?"
-#: ../../services.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÄÌÑ ÐÏÂÕÄÏ×É ×ÉÓÏËÏÎÁĦÊÎÏÇÏ\n"
-"ÓÅÒ×ÅÒÁ Ú ×ÉÓÏËÏÀ ÐÒÏÄÕËÔÉ×ΦÓÔÀ."
+msgid "Do you want to start the connection at boot?"
+msgstr "þÉ ÷É ÈÏÞÅÔŠצÄËÒÉ×ÁÔÉ Ú'¤ÄÎÁÎÎÑ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ?"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
+msgid "Processor ID"
msgstr ""
-"lpd - ÃÅ ÄÅÍÏÎ ÄÒÕËÕ, ÑËÉÊ ÚÁÂÅÚÐÅÞÕ¤ ÒÏÂÏÔÕ lpr. æÁËÔÉÞÎÏ ×¦Î ¤\n"
-"ÓÅÒ×ÅÒÏÍ, ÑËÉÊ ÎÁÄÓÉÌÁ¤ ÒÏÂÏÔÕ ÄÌÑ ÄÒÕËÕ×ÁÎÎÑ ÎÁ ÐÒÉÎÔÅÒ¦."
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+msgid "Sound trouble shooting"
msgstr ""
-"Linuxconf Õ ÄÅÑËÉÈ ×ÉÐÁÄËÁÈ ÂÕÄÅ ×ÉËÏÎÕ×ÁÔÉ ÐÅ×Φ ÐÒÏÃÅÄÕÒÉ Ð¦Ä ÞÁÓ\n"
-"ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ ÝÏ ÚÁÂÅÚÐÅÞÉÔÉ Ð¦ÄÔÒÉÍÁÎÎÑ Ã¦Ì¦ÓÎÏÓÔ¦\n"
-"ËÏÎƦ­ÕÒÁæ§ ÓÉÓÔÅÍÉ."
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"á×ÔÏÍÁÔÉÞÎÅ ×ÉÚÎÁÞÅÎÎÑ ÔÁ ËÏÎƦ­ÕÒÕ×ÁÎÎÑ ÁÐÁÒÁÔÎÏÇÏ ÚÁÂÅÚÐÅÞÅÎÎÑ ÐÒÉ\n"
-"ÚÁ×ÁÎÔÁÖÅÎΦ."
+msgid "Polish (qwerty layout)"
+msgstr "ðÏÌØÓØËÁ (ÒÏÚËÌÁÄËÁ qwerty)"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"á×ÔÏÍÁÔÉÞÎÅ ÓÔ×ÏÒÅÎÎÑ ÆÁÊÌ¦× ÚÁÇÏÌÏ×Ë¦× ÄÌÑ ÑÄÒÁ × ËÁÔÁÌÏÚ¦ /boot ÄÌÑ\n"
-"/usr/include/linux/{autoconf,version}.h"
+msgid "activate now"
+msgstr "ÁËÔÉצÚÕ×ÁÔÉ ÚÁÒÁÚ"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
+"\n"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"ãÅÊ ÐÁËÅÔ ÚÁ×ÁÎÔÁÖÕ¤ ×ÉÂÒÁÎÕ ÒÏÚËÌÁÄËÕ ËÌÁצÁÔÕÒÉ, ÑËÁ ×ÓÔÁÎÏ×ÌÀ¤ÔØÓÑ\n"
-"× /etc/sysconfig/keyboard. ãÑ ËÌÁצÁÔÕÒÁ ÍÏÖÅ ÂÕÔÉ ×ÉÂÒÁÎÁ ÚÁ\n"
-"ÄÏÐÏÍÏÇÏÀ ÐÒÏÇÒÁÍÉ kbdconfig. ëÒÁÝÅ ÚÁÌÉÛÉÔÉ ÃÅÊ ÐÁËÅÔ ÐÒÁÃÀÀÞÉÍ ÎÁ\n"
-"¦ÌØÛÏÓÔ¦ ÓÉÓÔÅÍ."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
msgstr ""
-"úÁÐÕÓËÁ¤ ÍÅÈÁΦÚÍ Æ¦ÌØÔÒÕ×ÁÎÎÑ ÐÁËÅÔ¦× ÄÌÑ ÑÄÒÁ 2.2 ì¦ÎÁËÓÁ, ÄÌÑ ÔÏÇÏ\n"
-"ÝÏ ÍÁÔÉ ÚÁÈÉÓÔ ÔÉÐÕ firewall ÎÁ ×ÁÛ¦Ê ÓÉÓÔÅͦ."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
+msgid "Host \"%s\", port %s"
msgstr ""
-"óÕÐÅÒÓÅÒ×ÅÒ ÄÅÍÏÎ (¦ÌØÛ ×¦ÄÏÍÉÊ Ð¦Ä ÎÁÚ×ÏÀ inetd) ÓÌÕÖÉÔØ ÄÌÑ ÚÁÐÕÓËÕ\n"
-"Ò¦ÚÎÏÍÁΦÔÎÉÈ ÓÅÒ×¦Ó¦× ¶ÎÔÅÒÎÅÔÕ, ËÏÌÉ ÃÅ ÎÅÏÂȦÄÎÏ. ÷¦Î\n"
-"צÄÐÏצÄÁÌØÎÉÊ ÚÁ ÓÔÁÒÔ ÂÁÇÁÔØÏÈ ÓÅÒצӦ×, ÔÁËÉÈ ÑË telnet, ftp, rsh,\n"
-"ÔÁ rlogin. ðÒÉ ÎÅÐÒÁÃÀÀÞÏÍÕ ÓÅÒ×ÅÒ¦ inetd ÎÅ ÂÕÄÕÔØ ÔÁËÏÖ ÐÒÁÃÀ×ÁÔÉ\n"
-"×Ó¦ ¦ÎÛ¦ ÓÅÒצÓÉ."
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache - ÃÅ ÓÅÒ×ÅÒ ÄÌÑ World Wide Web. ÷¦Î ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÄÌÑ ÎÁÄÁÎÎÑ "
-"ÓÅÒצӦ×\n"
-"ÄÌÑ ÆÁÊÌ¦× HTML ÔÁ CGI."
+msgid "This partition can't be used for loopback"
+msgstr "ãÅÊ Ð¦ÄÒÏÚÄ¦Ì ÎÅ ÍÏÖÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ ÄÌÑ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake ×ÉËÏÎÕ¤ ÔÅÓÔÕ×ÁÎÎÑ ÁÐÁÒÁÔÎÏÇÏ ÚÁÂÅÚÐÅÞÅÎÎÑ ¦ ÑËÝÏ ÐÏÔÒ¦ÂÎÏ\n"
-"ËÏÎƦ­ÕÒÕ¤ ÎÏ×Å ÁÂÏ ÚͦÎÅÎÅ ÁÐÁÒÁÔÎÅ ÚÁÂÅÚÐÅÞÅÎÎÑ."
+msgid "File already exists. Use it?"
+msgstr "æÁÊÌ ×ÖÅ ¦ÓÎÕ¤. ëÏÒÉÓÔÕ×ÁÔÉÓÑ ÎÉÍ?"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+msgid "received: "
msgstr ""
-"GPM ÄÏÄÁ¤ ЦÄÔÒÉÍËÕ ÍÉÛËÉ ÄÏ ÔÅËÓÔÏ×ÉÈ ÐÒÏÇÒÁÍ Õ ì¦ÎÁËÓ¦, ÔÁËÉÈ ÑË,\n"
-"ÎÁÐÒÉËÌÁÄ, Midnight Commander. äÏÄÁ¤ ÔÁËÏÖ ÍÏÖÌÉ×ÏÓÔ¦ \"cut-and-paste\"\n"
-"ÄÏ ÐÒÏÇÒÁÍ, ÝÏ ÐÒÁÃÀÀÔØ ÎÁ ËÏÎÓÏ̦, ×ËÌÀÞÁÀÞÉ Ð¦ÄÔÒÉÍËÕ ÍÅÎÀ ÎÁ\n"
-"ËÏÎÓÏ̦."
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
+msgid "Right Alt key"
msgstr ""
-"cron - ÃÅ ÓÔÁÎÄÁÒÔÎÁ ÐÒÏÇÒÁÍÁ UNIX, ÑËÁ ×ÉËÏÎÕ¤ ×ÉÂÒÁΦ ËÏÒÉÓÔÕ×ÁÞÅÍ\n"
-"ÐÒÏÇÒÁÍÉ ÐÅÒ¦ÏÄÉÞÎÏ Õ ×ÉÂÒÁÎÉÊ ÞÁÓ. vixie cron ÄÏÄÁ¤ ÄÏ ÓÔÁÎÄÁÒÔÎÏÇÏ\n"
-"UNIX cron ˦ÌØËÁ ÎÏ×ÉÈ ÍÏÖÌÉ×ÏÓÔÅÊ, ×ËÌÀÞÁÀÞÉ Ð¦Ä×ÉÝÅÎÕ ÂÅÚÐÅËÕ ÔÁ\n"
-"¦ÌØÛ ÐÏÔÕÖΦ ËÏÎƦÇÕÒÁæÊΦ ÏÐæ§."
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "the list of alternative drivers for this sound card"
msgstr ""
-"÷ÉËÏÎÕ¤ ËÏÍÁÎÄÉ, ÚÁÐÌÁÎÏ×ÁΦ ËÏÍÁÎÄÏÀ at Ð¦Ä ÞÁÓ ×ÉËÏÎÁÎÎÑ ËÏÍÁÎÄÉ at\n"
-"¦ ×ÉËÏÎÕ¤ ÐÁËÅÔΦ ËÏÍÁÎÄÉ, ËÏÌÉ ÓÉÓÔÅÍÎÅ ÎÁ×ÁÎÔÁÖÅÎÎÑ ÄÏÓÔÁÔÎØÏ\n"
-"ÎÉÚØËÅ. "
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd ÓÌÕÖÉÔØ ÄÌÑ ËÏÎÔÒÏÌÀ ÚÁ Ò¦×ÎÅÍ ÂÁÔÁÒŧ ÔÁ ÚÁÐÉÓÕ ÐÏצÄÏÍÌÅÎØ ÐÒÏ\n"
-"ÃÅ Õ ÓÉÓÔÍÎÉÊ ÖÕÒÎÁÌ syslog. ëÒ¦Í ÃØÏÇÏ ×¦Î ÍÏÖÅ ×ÉÍÉËÁÔÉ ËÏÍÐ'ÀÔÅÒ,\n"
-"ËÏÌÉ ÂÁÔÁÒÅÑ ÒÏÚÒÑÄÉÌÁÓÑ."
+msgid "Gateway"
+msgstr "ûÌÀÚ"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing"
+msgstr "äÒÕË"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron ÓÌÕÖÉÔØ ÄÌÑ ÐÅÒ¦ÏÄÉÞÎÏÇÏ ×ÉËÏÎÁÎÎÑ ËÏÍÁÎÄ."
+msgid "Tonga"
+msgstr "ôÏÎÇÁ"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "úÁÐÕÓË Ú×ÕËÏ×ϧ ÓÉÓÔÅÍÉ ALSA (Advanced Linux Sound Architecture)"
+msgid "Tunisia"
+msgstr "ôÕΦÓ"
-#: ../../standalone.pm:1
-#, fuzzy, c-format
-msgid "Installing packages..."
-msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÕ %s"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Profile: "
+msgstr "ðÒÏƦÌØ: "
-#: ../../standalone.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Click on a device in the left tree in order to display its information here."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+msgid "XawTV isn't installed!"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+"Create/Transfer\n"
+"backup keys for SSH"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgid "Do not include critical files (passwd, group, fstab)"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "old static device name used in dev package"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "This label is already used"
+msgstr "ãÑ ÅÔÉËÅÔËÁ ×ÖÅ ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
+"ð¦ÓÌÑ ÆÏÒÍÁÔÕ×ÁÎÎÑ Ð¦ÄÒÏÚĦÌÕ %s, ×Ó¦ ÄÁΦ ÎÁ ÃØÏÍÕ Ð¦ÄÒÏÚĦ̦ \n"
+"ÂÕÄÕÔØ ×ÔÒÁÞÅΦ"
-#: ../../standalone.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "[keyboard]"
-msgstr "ëÌÁצÁÔÕÒÁ"
+msgid "Connection Time: "
+msgstr "ôÉÐ Ú×'ÑÚËÕ:"
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+msgid "select perm file to see/edit"
msgstr ""
-#: ../../standalone.pm:1
-#, c-format
+#: ../../standalone/livedrake:1
+#, fuzzy, c-format
msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
+"âÕÄØ-ÌÁÓËÁ, ×ÓÔÁ×ÔÅ ËÏÍÐÁËÔ-ÄÉÓË, ÐÏÚÎÁÞÅÎÉÊ \"%s\" Õ ÐÒÉÓÔÒ¦Ê ¦\n"
+"ÎÁÔÉÓΦÔØ çÁÒÁÚÄ Ð¦ÓÌÑ ÃØÏÇÏ.\n"
+"\n"
+"ñËÝÏ ÷É ÎÅ ÍÁ¤ÔÅ ÔÁËÏÇÏ ÄÉÓËÕ, ÎÁÔÉÓΦÔØ ÷¦ÄͦÎÉÔÉ, ÝÏ ÎÅ\n"
+"×ÓÔÁÎÏ×ÌÀ×ÁÔÉ Ú ÃØÏÇÏ ÄÉÓËÕ."
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Use group id for execution"
+msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
+
+#: ../../any.pm:1
#, c-format
+msgid "Choose the default user:"
+msgstr "÷ÉÂÅÒ¦ÔØ ÓÔÁÎÄÁÒÔÎÏÇÏ ËÏÒÉÓÔÕ×ÁÞÁ:"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Gabon"
+msgstr "½ÁÂÏÎ"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
+"\n"
+"äÌÑ ×¦ÄÄÁÌÅÎÏÇÏ ÓÅÒ×ÅÒÁ CUPS ÷ÁÍ ÎÅ ÐÏÔÒ¦ÂÎÏ ËÏÎƦ­ÕÒÕ×ÁÔÉ ÐÒÉÎÔÅÒ¦×,\n"
+"×Ó¦ ÐÒÉÎÔÅÒÉ ÂÕÄÕÔØ Á×ÔÏÍÁÔÉÞÎÏ ×ÉÚÎÁÞÅΦ. ñËÝÏ ÷É ÓÕÍΦ×Á¤ÔÅÓØ,\n"
+"×ÉÂÅÒ¦ÔØ \"÷¦ÄÄÁÌÅÎÉÊ ÓÅÒ×ÅÒ CUPS\"."
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default : save default directories.\n"
-"--debug : show all debug messages.\n"
-"--show-conf : list of files or directories to backup.\n"
-"--config-info : explain configuration file options (for non-X "
-"users).\n"
-"--daemon : use daemon configuration. \n"
-"--help : show this message.\n"
-"--version : show version number.\n"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
+"÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÔÁËÏÖ ¦ÎÛ¦ ÍÏ×É, Ñ˦ ÂÕÄÕÔØ ÄÏÓÔÕÐΦ × ÓÉÓÔÅͦ ЦÓÌÑ\n"
+"ÕÓÔÁÎÏ×ËÉ"
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain"
+msgstr "äÏÍÅÎ NIS"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "ôÏÞÎÉÊ ÏÂ'¤Í ÐÁÍ'ÑÔ¦ (RAM). úÎÁÊÄÅÎÏ %d íÂ"
+
+#: ../../help.pm:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
msgstr ""
-#: ../../steps.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Exit install"
-msgstr "÷ÉÊÔÉ Ú ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../steps.pm:1
-#, fuzzy, c-format
-msgid "Install updates"
-msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ"
+msgid "Provider dns 2 (optional)"
+msgstr "2Ê DNS ÐÒÏ×ÁÊÄÅÒÁ (ÎÅÏÂÏ×'ÑÚËÏ×Ï)"
-#: ../../steps.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Configure services"
-msgstr "îÁÓÔÒϧÔÉ ÓÅÒצÓÉ"
+msgid "Boot device"
+msgstr "ðÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÅÎÎÑ"
-#: ../../steps.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure X"
-msgstr "îÁÓÔÒϧÔÉ X"
+msgid "Which partition do you want to resize?"
+msgstr "òÏÚÍ¦Ò ÑËÏÇÏ Ð¦ÄÒÏÚĦÌÕ ×É ÈÏÞÅÔÅ ÚͦÎÉÔÉ?"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "âÌÏË ÚÁ×ÁÎÔÁÖÅÎÎÑ"
+msgid "United States Minor Outlying Islands"
+msgstr "ïÓÔÒÏ×É óÐÏÌÕÞÅÎÉÈ ûÔÁÔ¦× áÍÅÒÉËÉ"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Configure networking"
-msgstr "îÁÓÔÒϧÔÉ ÍÅÒÅÖÕ"
+msgid "A tool to monitor your logs"
+msgstr "úÁӦ ÄÏÇÌÑÄÁÎÎÑ ÷ÁÛÉÈ ÖÕÒÎÁÌØÎÉÈ ÆÁÊ̦×"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add a user"
-msgstr "äÏÄÁÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
+msgid "Djibouti"
+msgstr "äÖÉÂÕÔ¦"
-#: ../../steps.pm:1
-#, fuzzy, c-format
-msgid "Root password"
-msgstr "âÅÚ ÐÁÒÏÌÀ"
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "detected on port %s"
+msgstr "ÚÎÁÊÄÅÎÏ ÎÁ ÐÏÒÔÕ %s"
-#: ../../steps.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Install system"
-msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ"
+msgid "LPD"
+msgstr "LPD"
-#: ../../steps.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Choose packages to install"
-msgstr "÷ÉÂ¦Ò ÐÁËÅÔ¦×"
+msgid "Graphics card: %s\n"
+msgstr "÷¦ÄÅÏ ÐÌÁÔÁ: %s\n"
-#: ../../steps.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "æÏÒÍÁÔÕ×ÁÔÉ Ð¦ÄÒÏÚĦÌÉ"
+msgid "Yaboot"
+msgstr "Yaoot"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Partitioning"
-msgstr "äÒÕË"
+msgid "Please check if you are using a DVDRAM device"
+msgstr "ëÌÁÃΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁ ЦÄÒÏÚĦ̦"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Splash selection"
+msgstr "úÂÅÒÅÇÔÉ ×ÉÂ¦Ò ÐÁËÅÔ¦×"
+
+#: ../../partition_table.pm:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "÷ÉÂÅÒ¦ÔØ ÔÉÐ ËÌÁצÁÔÕÒÉ"
+msgid "Extended partition not supported on this platform"
+msgstr "òÏÚÛÉÒÅΦ ЦÄÒÏÚĦÌÉ ÎŠЦÄÔÒÉÍÕÀÔØÓÑ ÎÁ Ã¦Ê ÐÌÁÔÆÏÒͦ."
-#: ../../steps.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "÷ÉÂÅÒ¦ÔØ ÔÉÐ ÕÓÔÁÎÏ×ËÉ"
+msgid "ISDN Configuration"
+msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ISDN"
-#: ../../steps.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "high"
+msgstr "÷ÉÓÏËÉÊ"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Hard drive detection"
-msgstr "÷ÉÚÎÁÞÅÎÎÑ ÔÉÐÕ ÄÉÓËÕ"
+msgid "Internet Connection Sharing"
+msgstr "óЦÌØÎÅ ×ÉËÏÒÉÓÔÁÎÎ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Configure mouse"
-msgstr "óËÏÎƦÇÕÒÕÊÔÅ ÍÉÛÕ"
+msgid "Choose file"
+msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
-#: ../../steps.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "License"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
msgstr ""
+"õ×ÁÇÁ! úÎÁÊÄÅÎÁ ¦ÓÎÕÀÞÁ ËÏÎƦ­ÕÒÁÃ¦Ñ firewall. íÏÖÌÉ×Ï ÷ÁÍ ÐÏÔÒ¦ÂÎÏ\n"
+"ÂÕÄÅ ×ÉËÏÎÁÔÉ ÄÅÑ˦ ÚͦÎÉ Ð¦ÓÌÑ ÕÓÔÁÎÏ×ËÉ."
-#: ../../steps.pm:1
-#, c-format
-msgid "Language"
-msgstr "÷ÉÂÅÒ¦ÔØ ÍÏ×Õ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "÷ÉÍÉËÁÀ ÍÅÒÅÖÕ"
-#: ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "utopia 25"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
msgstr ""
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "OK"
-msgstr "çÁÒÁÚÄ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer default settings"
+msgstr "÷ÉÂ¦Ò ÍÏÄÅ̦ ÐÒÉÎÔÅÒÁ"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "ú×ÉÞÁÊÎÉÊ ÔÉÐ PS2 ÍÉÛ¦ Ú ËÏ̦ÝÁÔËÏÍ"
-#: ../../ugtk.pm:1
-#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing old printer \"%s\"..."
+msgstr "óÔÉÒÁÀ ÄÁΦ ÓÔÁÒÏÇÏ ÐÒÉÎÔÅÒÁ \"%s\" ..."
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Select a device !"
+msgstr "÷ÉÂÅÒ¦ÔØ ÇÒÁƦÞÎÕ ÐÌÁÔÕ"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected server"
+msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (ÄÒÁÊ×ÅÒ ÄÉÓÐÌÅÑ ÄÌÑ ÕÓÔÁÎÏ×ËÉ)"
+msgid "French Southern Territories"
+msgstr "æÒÁÎÃÕÚØ˦ ð¦×ÄÅÎΦ ôÅÒÉÔÏÒ¦§"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+msgid "the vendor name of the processor"
msgstr ""
-"ãÑ ×¦ÄÅÏÐÌÁÔÁ ÍÁ¤ ЦÄÔÒÉÍËÕ ÁÐÁÒÁÔÎÏÇÏ ÐÒÉÓËÏÒÅÎÎÑ ÔÒØÏÈ×ÉͦÒÎϧ\n"
-"ÇÒÁƦËÉ, ÁÌÅ Ô¦ÌØËÉ ÄÌÑ XFree %s, ÷¶äí¶ôøôå, ýï ãå åëóðåòéíåîôáìøîéê\n"
-"òåöéí, ñëéê íïöå ðòé÷åóôé äï úá÷éóáîîñ ÷áûïçï ëïíð'àôåòá."
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr ""
-"XFree %s Ú åëóðåòéíåîôáìøîïà ЦÄÔÒÉÍËÏÀ ÁÐÁÒÁÔÎÏÇÏ ÐÒÉÓËÏÒÅÎÎÑ ÔÒØÏÈ×ÉͦÒÎϧ "
-"ÇÒÁƦËÉ"
+msgid "All data on this partition should be backed-up"
+msgstr "ðÏÔÒ¦ÂÎÏ ÚÂÅÒÅÇÔÉ ×Ó¦ ÄÁΦ ÎÁ ÃØÏÍÕ Ð¦ÄÒÏÚĦ̦"
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"÷ÁÛÁ צÄÅÏÐÌÁÔÁ ÍÏÖÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÁÐÁÒÁÔÎÉÍ 3D ÐÒÉÓËÏÒÅÎÎÑÍ ÇÒÁƦËÉ\n"
-"ÁÌÅ Ô¦ÌØËÉ Ú ÓÅÒ×ÅÒÏÍ XFree %s."
+msgid "Installing package %s"
+msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÕ %s"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s Ú ÁÐÁÒÁÔÎÉÍ ÐÒÉÓËÏÒÅÎÎÑÍ ÔÒØÏÈ×ÉͦÒÎϧ ÇÒÁƦËÉ"
+msgid "Checking device and configuring HPOJ..."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
msgstr ""
-"ãÑ ×¦ÄÅÏÐÌÁÔÁ ÍÁ¤ ЦÄÔÒÉÍËÕ ÁÐÁÒÁÔÎÏÇÏ ÐÒÉÓËÏÒÅÎÎÑ ÔÒØÏÈ×ÉͦÒÎϧ\n"
-"ÇÒÁƦËÉ, ÁÌÅ Ô¦ÌØËÉ ÄÌÑ XFree %s, ÷¶äí¶ôøôå, ýï ãå åëóðåòéíåîôáìøîéê\n"
-"òåöéí, ñëéê íïöå ðòé÷åóôé äï úá÷éóáîîñ ÷áûïçï ëïíð'àôåòá. ÷ÁÛÁ ÐÌÁÔÁ\n"
-"ЦÄÔÒÉÍÕ¤ÔØÓÑ XFree %s, ÑËÉÊ ÍÁ¤ ËÒÁÝÕ Ð¦ÄÔÒÉÍËÕ Ä×Ï×ÉͦÒÎϧ ÇÒÁƦËÉ."
+"ýÏ ÍÁÔÉ Â¦ÌØÛŠЦÄÒÏÚĦ̦×, Ú¦ÔÒ¦ÔØ ÏÄÉÎ ¦Ú ÔÉÈ, ÝÏ ¤. ð¦ÓÌÑ ÃØÏÇÏ\n"
+"×É ÍÏÖÅÔÅ ÓÔ×ÏÒÉÔÉ ÚÁͦÓÔØ ÎØÏÇÏ Ë¦ÌØËÁ ÒÏÚÛÉÒÅÎÉÈ Ð¦ÄÒÏÚĦ̦×"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
msgstr ""
-"÷ÁÛÁ צÄÅÏÐÌÁÔÁ ÍÏÖÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÁÐÁÒÁÔÎÉÍ ÐÒÉÓËÏÒÅÎÎÑÍ\n"
-"ÔÒØÏÈ×ÉͦÒÎϧ ÇÒÁƦËÉ ÁÌÅ Ô¦ÌØËÉ Ú ÓÅÒ×ÅÒÏÍ XFree %s. ÷ÁÛÁ צÄÅÏÐÌÁÔÁ\n"
-"ЦÄÔÒÉÍÕ¤ÔØÓÑ ÓÅÒ×ÅÒÏÍ XFree %s, Õ ÑËÏÍÕ ×É ÍÏÖÌÉ×Ï ÍÁÔÉÍÅÔÅ ËÒÁÝÉÊ\n"
-"ÓÕÐÒÏ×¦Ä ÄÌÑ Ä×ÏÈ×ÉͦÒÎϧ ÇÒÁƦËÉ."
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree86 %s"
-
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "îÁÓÔÒϧÔÉ Ô¦ÌØËÉ ÐÌÁÔÕ \"%s\" (%s)"
+msgid "Choose packages to install"
+msgstr "÷ÉÂ¦Ò ÐÁËÅÔ¦×"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ ÒÏÚÛÉÒÅÎÎÑÍ Xinerama"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "óËÏÎƦ­ÕÒÕ×ÁÔÉ ×Ó¦ ÍÏΦÔÏÒÉ ÎÅÚÁÌÅÖÎÏ"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "÷ó¶ ¦ÓÎÕÀÞ¦ ЦÄÒÏÚĦÌÉ ÔÁ ×Ó¦ ÄÁΦ ÎÁ ÄÉÓËÕ %s ÂÕÄÕÔØ ×ÔÒÁÞÅΦ"
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "ñËÕ ËÏÎƦÇÕÒÁæÀ XFree ×É ÈÏÞÅÔÅ ÍÁÔÉ?"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅ ÚÁÌÉÛÉÌÏÓØ ÄÏÓÔÁÔÎØÏ ×¦ÌØÎÏÇÏ Í¦ÓÃÑ ÄÌÑ ÕÓÔÁÎÏ×ËÉ\n"
+"ÞÉ ÐÏÎÏ×ÌÅÎÎÑ (%d > %d )"
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "XFree configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ XFree"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"ëÏÖÎÏÍÕ ÐÒÉÎÔÅÒÕ ÐÏ×ÉÎÎÁ צÄÐÏצÄÁÔÉ ÎÁÚ×Á (ÎÁÐÒÉËÌÁÄ lp).\n"
+"ðÏÌÑ ïÐÉÓ ÔÁ òÏÚÔÁÛÕ×ÁÎÎÑ ÚÁÐÏ×ÎÀ×ÁÔÉ ÎÅÏÂÏ×'ÑÚËÏ×Ï. ÷ÏÎÉ ¤\n"
+"ÌÉÛ ËÏÍÅÎÔÁÒÑÍÉ ÄÌÑ ËÏÒÉÓÔÕ×ÁÞ¦×."
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "÷ÉÂÅÒ¦ÔØ ÒÏÚÍ¦Ò ÐÁÍ'ÑÔ¦ ÷ÁÛϧ ÇÒÁƦÞÎϧ ÐÌÁÔÉ"
-
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
msgstr ""
-"÷ÁÛÁ ÓÉÓÔÅÍÁ ÍÏÖÅ ÐÒÁÃÀ×ÁÔÉ Ú Ë¦ÌØËÏÍÁ ÍÏΦÔÏÒÁÍÉ.\n"
-"ýÏ ×É ÈÏÞÅÔÅ ÎÁÓÔÒϧÔÉ?"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ Ú Ë¦ÌØËÏÍÁ ÍÏΦÔÏÒÁÍÉ"
+msgid "Bhutan"
+msgstr "âÕÔÁÎ"
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
-msgid "Choose an X server"
-msgstr "÷ÉÂÅÒ¦ÔØ X ÓÅÒ×ÅÒ"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Network interface"
+msgstr "¶ÎÔÅÒÆÅÊÓ ÍÅÒÅÖ¦"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "X server"
-msgstr "X ÓÅÒ×ÅÒ"
+msgid "Reading printer data..."
+msgstr "þÉÔÁÀ ÄÁΦ ÐÒÉÎÔÅÒ¦× ..."
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 í ÞÉ Â¦ÌØÛÅ"
+msgid "Korean keyboard"
+msgstr "ëÏÒÅÊÓØËÁ ËÌÁצÁÔÕÒÁ"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "32 MB"
-msgstr "32 íÂ"
+msgid "Not connected"
+msgstr "îÅÍÁ¤ Ú'¤ÄÎÁÎÎÑ"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 íÂ"
+msgid "Greek"
+msgstr "çÒÅÃØËÁ"
-#: ../../Xconfig/card.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 íÂ"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 íÂ"
+msgid "Saint Kitts and Nevis"
+msgstr "ó×. ë¦ÔÓ ¦ îÅצÓ"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "2 MB"
-msgstr "2 íÂ"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "1 MB"
-msgstr "1 íÂ"
+msgid "Enable OF Boot?"
+msgstr "äÏÚ×ÏÌÉÔÉ ÚÁ×ÁÎÔÁÖÅÎÎÑ OF?"
-#: ../../Xconfig/card.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 ËÂ"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "JFS ÎÅ ÍÏÖÎÁ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÎÁ ЦÄÒÏÚĦÌÁÈ ÒÏÚͦÒÏÍ ÍÅÎÛÅ 16íÂ."
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 ËÂ"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "þÁÓÔÏÔÁ ×ÅÒÔÉËÁÌØÎϧ ÒÏÚÇÏÒÔËÉ ÍÏΦÔÏÒÁ: %s\n"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
+msgid "path"
msgstr ""
-"úÂÅÒÅÇÔÉ ÚͦÎÉ?\n"
-"¶ÓÎÕÀÞÁ ËÏÎƦÇÕÒÁæÑ:\n"
-"\n"
-"%s"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Options"
-msgstr "ðÁÒÁÍÅÔÒÉ"
+msgid "Mount point"
+msgstr "ôÏÞËÁ ÍÏÎÔÕ×ÁÎÎÑ"
-#: ../../Xconfig/main.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Test"
+msgid ""
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
msgstr ""
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore system"
+msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Resolution"
-msgstr "òÏÚĦÌØÎÁ ÚÄÁÔΦÓÔØ"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Monitor"
-msgstr "íÏΦÔÏÒ"
+msgid "The DHCP end ip"
+msgstr ""
-#: ../../Xconfig/main.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, fuzzy, c-format
-msgid "Graphic Card"
-msgstr "÷¦ÄÅÏ ÐÌÁÔÁ"
+msgid "Another one"
+msgstr "¶ÎÔÅÒÎÅÔ"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "þÁÓÔÏÔÁ ×ÅÒÔÉËÁÌØÎϧ ÒÏÚÇÏÒÔËÉ"
+msgid "Drakbackup"
+msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "þÁÓÔÏÔÁ ÇÏÒÉÚÏÎÔÁÌØÎϧ ÒÏÚÇÏÒÔËÉ"
+msgid "Colombia"
+msgstr "ëÏÌÕͦÑ"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"ä×Á ÄÕÖÅ ×ÁÖÌÉ×ÉÈ ÐÁÒÁÍÅÔÒÉ - ÃÅ ÞÁÓÔÏÔÁ ×ÅÒÔÉËÁÌØÎϧ ÒÏÚÇÏÒÔËÉ\n"
-"(ÔÏÂÔÏ - ÞÁÓÔÏÔÁ, Ú ÑËÏÀ ÏÂÎÏ×ÌÀ¤ÔØÓÑ ÚÏÂÒÁÖÅÎÎÑ ÎÁ ÅËÒÁΦ), ÔÁ\n"
-"ÎÁʦÌØÛ ×ÁÖÌÉ×Ï - ÞÁÓÔÏÔÁ ÇÏÒÉÚÏÎÔÁÌØÎϧ ÓÉÎÈÒÏΦÚÁæ§ (ÔÏÂÔÏ - ÔÁ\n"
-"ÞÁÓÔÏÔÁ, Ú ÑËÏÀ ÎÁ ÅËÒÁΦ ÍÁÌÀÀÔØÓÑ ÇÏÒÉÚÏÎÔÁÌØΦ ÒÑÄËÉ).\n"
+"Current configuration of `%s':\n"
"\n"
-"äõöå ÷áöìé÷ï ðáí'ñôáôé, ÝÏ ×É ÐÏ×ÉÎΦ ×ÉÂÒÁÔÉ ÔÁËÉÊ ÍÏΦÔÏÒ, ÐÁÒÁÍÅÔÒÉ\n"
-"ÑËÏÇÏ ÎÅ ÐÅÒÅ×ÉÝÕÀÔØ ÓÐÒÁ×ÖÎ¦È ÐÁÒÁÍÅÔÒ¦× ÷ÁÛÏÇÏ ÍÏΦÔÏÒÁ: ¦ÎÁËÛÅ ÷É\n"
-"ÍÏÖÅÔÅ ÐÒÉÞÉÎÉÔÉ ÎÅÐÏÐÒÁ×ÎÕ ÛËÏÄÕ Ó×ϤÍÕ ÍÏΦÔÏÒÕ. \n"
-"ñËÝÏ ×É ÍÁ¤ÔÅ ÓÕÍΦ×É ÝÏÄÏ ÈÁÒÁËÔÅÒÉÓÔÉË Ó×ÏÇÏ ÍÏΦÔÏÒÁ ×ÉÂÅÒ¦ÔØ ÐÅ×ÎÏ\n"
-"ǦÒÛÉÊ ÍÏΦÔÏÒ."
-
-#: ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Vendor"
-msgstr "îÁÚÁÄ"
-
#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Plug'n Play"
msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose a monitor"
-msgstr "÷ÉÂÅÒ¦ÔØ ÔÉÐ ÍÏΦÔÏÒÕ"
+msgid "Reunion"
+msgstr "òÅΦÏÎ"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "÷¦ÄÅÏ ÐÌÁÔÁ: %s"
+msgid "Details"
+msgstr "ðÏÄÒÏÂÉæ"
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "÷ÉÂÅÒ¦ÔØ ÒÏÚĦÌØÎÕ ÚÄÁÔΦÓÔØ ÔÁ ˦ÌØ˦ÓÔØ ËÏÌØÏÒ¦×"
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "For security reasons, it will be disconnected now."
+msgstr "ú ÔÏÞËÉ ÚÏÒÕ ÂÅÚÐÅËÉ, ×É ÂÕÄÅÔÅ ÚÁÒÁÚ ×¦Ä'¤ÄÎÁΦ."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Resolutions"
-msgstr "òÏÚĦÌØΦ ÚÄÁÔÎÏÓÔ¦"
+msgid "Synchronization tool"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 ͦÌØÊÑÒÄÉ ËÏÌØÏÒ¦× (32 ¦Ô)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Checking your system..."
+msgstr "ñËÕ ÓÉÓÔÅÍÕ ÄÒÕËÕ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ?"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 ͦÌØÊÏÎ¦× ËÏÌØÏÒ¦× (24 ¦Ô)"
+msgid "Print"
+msgstr "äÒÕË"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ÔÉÓÑÞ ËÏÌØÏÒ¦× (16 ¦Ô)"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ÔÉÓÑÞ¦ ËÏÌØÏÒ¦× (15 ¦Ô)"
+msgid "Mongolia"
+msgstr "íÏÎÇÏ̦Ñ"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "265 ËÏÌØÏÒ¦× (8 ¦Ô)"
+msgid "Mounted\n"
+msgstr "úÍÏÎÔÏ×ÁÎÉÊ\n"
-#: ../../Xconfig/test.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Is this the correct setting?"
-msgstr "÷ÓŠצÒÎÏ?"
+msgid "Graphical Interface"
+msgstr "óÔÁÒÔÕ×ÁÔÉ X Á×ÔÏÍÁÔÉÞÎÏ"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d ÓÅËÕÎÄ"
+msgid "Restore Users"
+msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÆÁÊÌÕ"
-#: ../../Xconfig/test.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Encryption key for %s"
+msgstr "ðÁÒÏ̦ Ò¦ÚΦ"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
+"portmapper ËÅÒÕ¤ Ú'¤ÄÎÁÎÎÑÍÉ Ú ÐÒÏÔÏËÏÌÏÍ RPC, Ñ˦ ×ÉËÏÒÉÓÔÏ×ÕÀÔØÓÑ\n"
+"ÔÁËÉÍÉ ÐÒÏÔÏËÏÌÁÍÉ, ÑË NFS ÔÁ NIS. portmaper ÐÏ×ÉÎÅÎ ÐÒÁÃÀ×ÁÔÉ ÎÁ\n"
+"ÍÁÛÉÎÁÈ, Ñ˦ ¤ ÓÅÒ×ÅÒÁÍÉ ÄÌÑ ÐÒÏÔÏËÏ̦×, ÝÏ ËÏÒÉÓÔÕÀÔØÓÑ RPC."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"õ×ÁÇÁ! ôÅÓÔÕ×ÁÎÎÑ Ã¦¤§ ÇÒÁƦÞÎϧ ÐÌÁÔÉ ÍÏÖÅ ÐÒÉÚ×ÅÓÔÉ ÄÏ ÚÁ×ÉÓÁÎÎÑ\n"
-"÷ÁÛÏÇÏ ËÏÍÐ'ÀÔÅÒÁ."
+msgid "Detected hardware"
+msgstr "ðÅÒÅÇÌÑÎØÔÅ ¦ÎÆÏÒÍÁæÀ ÐÒÏ ÁÐÁÒÁÔÎÅ ÚÁÂÅÚÐÅÞÅÎÎÑ"
-#: ../../Xconfig/test.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "þÉ ×É ÈÏÞÅÔÅ ×ÉÐÒÏÂÕ×ÁÔÉ ÎÏ×Õ ËÏÎƦ­ÕÒÁæÀ?"
+msgid "Mauritius"
+msgstr "íÁ×ÒÉ˦Ê"
-#: ../../Xconfig/test.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "ôÅÓÔÕ×ÁÎÎÑ ËÏÎƦ­ÕÒÁæ§"
+msgid "Myanmar (Burmese)"
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
#, fuzzy, c-format
-msgid "What norm is your TV using?"
-msgstr "ñËÉÊ ÔÉÐ Ú'¤ÄÎÁÎÎÑ ISDN ÷É ÍÁ¤ÔÅ?"
+msgid "Enabling swap partition %s"
+msgstr "æÏÒÍÁÔÕ×ÁÎÎÑ Ð¦ÄÒÏÚĦÌÕ %s"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"îÅÍÁ¤ ЦÄÒÏÚĦÌÕ FAT ÄÌÑ ÚͦÎÉ ÒÏÚͦÒÕ ÁÂÏ ÄÌÑ ×ÉËÏÒÉÓÔÁÎÎÑ ÑË ÐÒÉÓÔÒ¦Ê "
+"Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ (ÁÂÏ ÎÅ ×ÉÓÔÁÞÁ¤ צÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ)"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (old)"
+msgstr "÷¦ÒÍÅÎÓØËÁ (ÓÔÁÒÁ)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
msgstr ""
+"ðÒÉÎÔÅÒ Ú ÎÁÚ×ÏÀ \"%s\" ×ÖÅ ¦ÓÎÕ¤ × \"%s\". îÁÔÉÓΦÔØ \"ðÅÒÅÎÅÓÔÉ\" ÝÏÂ\n"
+"ÐÅÒÅÐÉÓÁÔÉ ÊÏÇÏ ×ÉÚÎÁÞÅÎÎÑ. ÷É ÍÏÖÅÔÅ ÔÁËÏÖ ÎÁÄÒÕËÕ×ÁÔÉ ÎÏ×Õ ÎÁÚ×Õ ÞÉ\n"
+"ÐÒÏÐÕÓÔÉÔÉ ÃÅÊ ÐÒÉÎÔÅÒ."
-#: ../../Xconfig/various.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
msgstr ""
-"ñ ÍÏÖÕ ÎÁÓÔÒϧÔÉ ÷ÁÛÕ ÓÉÓÔÅÍÕ ÔÁË, ÝÏ X ÂÕÄÅ ÓÔÁÒÔÕ×ÁÔÉ Á×ÔÏÍÁÔÉÞÎÏ\n"
-"ЦÓÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ.\n"
-"þÉ ×É ÈÏÞÅÔÅ, ÝÏ X ÓÔÁÒÔÕ×Á× Á×ÔÏÍÁÔÉÞÎÏ?"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Graphical interface at startup"
-msgstr "óÔÁÒÔÕ×ÁÔÉ X Á×ÔÏÍÁÔÉÞÎÏ"
+msgid ", host \"%s\", port %s"
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ÄÒÁÊ×ÅÒ: %s\n"
+msgid "Monaco"
+msgstr "íÏÎÁËÏ"
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "X ÓÅÒ×ÅÒ: %s\n"
+msgid "%s formatting of %s failed"
+msgstr "%s ÆÏÒÍÁÔÕ×ÁÎÎÑ %s ×ÔÒÁÞÅÎÏ"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "òÏÚĦÌØÎÁ ÚÄÁÔΦÓÔØ: %s\n"
+msgid "Partitioning failed: %s"
+msgstr "òÏÚÂÉÔÔÑ ÎÁ ЦÄÒÏÚĦÌÉ ÎÅ×ÄÁÌÅ: %s"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "çÌÉÂÉÎÁ ËÏÌØÏÒÕ: %s\n"
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Canada (cable)"
+msgstr "ëÁÎÁÄÓØËÁ (ë×ÅÂÅË)"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "÷¦ÄÅÏ ÐÁÍ'ѦÔØ: %sËÂ\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Upgrade"
+msgstr "ðÏÎÏ×ÌÅÎÎÑ"
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "÷¦ÄÅÏ ÐÌÁÔÁ: %s\n"
+msgid "Workstation"
+msgstr "òÏÂÏÞÁ ÓÔÁÎæÑ"
-#: ../../Xconfig/various.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "þÁÓÔÏÔÁ ×ÅÒÔÉËÁÌØÎϧ ÒÏÚÇÏÒÔËÉ ÍÏΦÔÏÒÁ: %s\n"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"÷ÓÔÁÎÏ×ÌÀÀ ÐÁËÅÔ %s\n"
+"%d%%"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "çÏÒÉÚÏÎÔÁÌØÎÁ ÓÉÎÈÒÏΦÚÁÃ¦Ñ ÍÏΦÔÏÒÁ: %s\n"
+msgid "Kyrgyzstan"
+msgstr "ëÉÒÇÉÚÓÔÁÎ"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "íÏΦÔÏÒ: %s\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "äÏËÕÍÅÎÔÁæÑ"
-#: ../../Xconfig/various.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "óÐÅæÁÌØÎÉÊ ÐÒÉÓÔÒ¦Ê ÍÉÛ¦: %s\n"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron ÓÌÕÖÉÔØ ÄÌÑ ÐÅÒ¦ÏÄÉÞÎÏÇÏ ×ÉËÏÎÁÎÎÑ ËÏÍÁÎÄ."
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "ôÉÐ ÍÉÛ¦: %s\n"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"÷É ÐÏ×ÉÎΦ ÍÁÔÉ Ð¦ÄÒÏÚÄ¦Ì root.\n"
+"äÌÑ ÃØÏÇÏ ÓÔ×ÏÒ¦ÔØ ÎÏ×ÉÊ Ð¦ÄÒÏÚÄ¦Ì (ÁÂÏ ËÌÁÃΦÔØ ÎÁ ×ÖÅ\n"
+"¦ÓÎÕÀÞÏÍÕ). ð¦ÓÌÑ ÃØÏÇÏ ×ÉÂÅÒ¦ÔØ ``ôÏÞËÁ ÍÏÎÔÕ×ÁÎÎÑ'' ¦ ×ÓÔÁÎÏצÔØ §§\n"
+"× `/'"
-#: ../../Xconfig/various.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "òÏÚËÌÁÄËÁ ËÌÁצÁÔÕÒÉ: %s\n"
+msgid "Proxy should be http://..."
+msgstr "÷ÉÇÌÑÄ ÐÒÏËÓ¦ ÍÁ¤ ÂÕÔÉ http://..."
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Options: %s"
-msgstr "ðÁÒÁÍÅÔÒÉ: %s"
+msgid "South Africa"
+msgstr "ð¦×ÄÅÎÁ áÆÒÉËÁ"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mount point: "
-msgstr "ôÏÞËÁ ÍÏÎÔÕ×ÁÎÎÑ: "
-
-#: ../../diskdrake/dav.pm:1
-#, fuzzy, c-format
-msgid "Server: "
-msgstr "óÅÒ×ÅÒ"
+msgid "Western Sahara"
+msgstr "úÁȦÄÎÁ óÁÈÁÒÁ"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "The URL must begin with http:// or https://"
+msgid "Etherboot Floppy/ISO"
msgstr ""
-#: ../../diskdrake/dav.pm:1
-#, fuzzy, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "÷ÉÐÒÏÂÕÊÔÅ ÍÉÛËÕ, ÂÕÄØ-ÌÁÓËÁ"
-
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mount point"
-msgstr "ôÏÞËÁ ÍÏÎÔÕ×ÁÎÎÑ"
+msgid "Modify printer configuration"
+msgstr "úͦÎÉÔÉ ËÏÎƦÇÕÒÁæÀ ÐÒÉÎÔÅÒÁ"
-#: ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Server"
-msgstr "óÅÒ×ÅÒ"
+msgid "Choose a partition"
+msgstr "÷ÉÂÅÒ¦ÔØ Ð¦ÄÒÏÚĦÌ"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Mount"
-msgstr "íÏÎÔÕ×ÁÔÉ"
+msgid "Edit current rule"
+msgstr ""
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unmount"
-msgstr "òÏÚÍÏÎÔÕ×ÁÔÉ"
-
-#: ../../diskdrake/dav.pm:1
-#, fuzzy, c-format
-msgid "New"
-msgstr "ÎÏ×ÉÊ"
+msgid "%s"
+msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "úÁͦÓÔØ ÃØÏÇÏ ÓËÏÒÉÓÔÁÊÔÅÓÑ ``%s''"
+msgid "Please test the mouse"
+msgstr "÷ÉÐÒÏÂÕÊÔÅ ÍÉÛËÕ, ÂÕÄØ-ÌÁÓËÁ"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Type"
-msgstr "ôÉÐ"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Other Media"
+msgstr "¶ÎÛ¦"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system files"
+msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
+
+#: ../../mouse.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "óÐÏÞÁÔËÕ ÓËÏÒÉÓÔÕÊÔÅÓÑ ``òÏÚÍÏÎÔÕ×ÁÔÉ''"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Delete"
-msgstr "óÔÅÒÔÉ"
+msgid "Sector"
+msgstr "óÅËÔÏÒ"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Create"
-msgstr "óÔ×ÏÒÉÔÉ"
+msgid "Qatar"
+msgstr "ëÁÔÁÒ"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "ôÉÐÉ ÆÁÊÌÏ×ÉÈ ÓÉÓÔÅÍ:"
+msgid "LDAP Base dn"
+msgstr "dn ÎÁ ÏÓÎÏצLDAP "
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Empty"
-msgstr "ðÕÓÔÏ"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr "÷ÉÂÒÁÔÉ ÃÅÊ ÐÁËÅÔ ÎÅÍÏÖÌÉ×Ï. äÌÑ ÊÏÇÏ ÕÓÔÁÎÏ×ËÉ ÎÅ ×ÉÓÔÁÞÁ¤ ͦÓÃÑ."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Windows"
-msgstr "äÏÍÅÎ NIS"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "generate auto-install floppy"
+msgstr "óÔ×ÏÒÅÎÎÑ Á×ÔÏÕÓÔÁÎÏ×ÏÞÎϧ ÄÉÓËÅÔÉ"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Dialing mode"
+msgstr "òÅÖÉÍ Ú×'ÑÚËÕ ÞÅÒÅÚ ÍÏÄÅÍ"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Swap"
-msgstr "Swap"
+msgid "File sharing"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "öÕÒÎÁÌØÎÁ ÆÁÊÌÏ×Á ÓÉÓÔÅÍÁ"
+msgid "Clean /tmp at each boot"
+msgstr "ïÞÉÝÁÔÉ /tmp ÐÒÉ ËÏÖÎÏÍÕ ÐÅÒÅ×ÁÎÔÁÖÅÎΦ"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Malawi"
+msgstr "íÁÌÁצ"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "No hard drives found"
-msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
+msgid "Please choose your type of mouse."
+msgstr "ñËÉÊ ÔÉÐ ÍÉÛ¦ ×É ÍÁ¤ÔÅ?"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please click on a partition"
-msgstr "ëÌÁÃΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁ ЦÄÒÏÚĦ̦"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+msgid "class of hardware device"
msgstr ""
-"×É ÍÁ¤ÔÅ ÏÄÉÎ ×ÅÌÉËÉÊ ÄÉÓËÏ×ÉÊ \n"
-"ЦÄÒÏÚÄ¦Ì ÔÉÐÕ FAT (ÑËÉÊ × ÏÓÎÏ×ÎÏÍÕ\n"
-"×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÓÉÓÔÅÍÁÍÉ MicroSoft \n"
-"Dos/Windows). òÅËÏÍÅÎÄÏ×ÁÎÏ ÓÐÅÒÛÕ \n"
-"ÚÍÅÎÛÉÔÉ ÒÏÚÍ¦Ò ÃØÏÇÏ ÒÏÚĦÌÕ (ËÌÁÃΦÔØ \n"
-"ÎÁ ÎØÏÍÕ, ¦ ÐÏÔ¦Í ËÌÁÃΦÔØ ÎÁ \"úͦÎÉÔÉ ÒÏÚͦÒ\")"
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Choose action"
-msgstr "÷ÉÂÅÒ¦ÔØ Ä¦À"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Wizard"
-msgstr "ðÏͦÞÎÉË"
-
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-"ñËÝÏ ×É ÚÂÉÒÁ¤ÔÅÓØ ËÏÒÉÓÔÕ×ÁÔÉÓÑ aboot, ÎÅ ÚÁÂÕÄØÔÅ ÚÁÌÉÛÉÔÉ ×¦ÌØÎÉÊ\n"
-"ÒÏÚÄ¦Ì (ÄÏÓÔÁÔÎØÏ 2048 ÓÅËÔÏÒ¦×) ÎÁ ÐÏÞÁÔËÕ ÄÉÓËÕ"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "âÕÄØ-ÌÁÓËÁ, ÓÔ×ÏÒ¦ÔØ ÓÐÏÞÁÔËÕ ÒÅÚÅÒÎÕ ËÏЦÀ ÷ÁÛÉÈ ÄÁÎÉÈ"
+msgid "United Kingdom"
+msgstr "ïÂ'¤ÄÎÁÎÅ ëÏÒÏ̦×ÓÔ×Ï"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Read carefully!"
-msgstr "þÉÔÁÊÔÅ Õ×ÁÖÎÏ!"
+msgid "running"
+msgstr "ÐÒÁÃÀÀ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Encryption key (again)"
-msgstr ""
+msgid "default"
+msgstr "ÓÔÁÎÄÁÒÔÎÉÊ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "The encryption keys do not match"
-msgstr "ðÁÒÏ̦ Ò¦ÚΦ"
+msgid "Indonesia"
+msgstr "¶ÎÄÏÎÅÚ¦Ñ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"ãÅÊ ÐÁÒÏÌØ ÚÁÎÁÄÔÏ ÐÒÏÓÔÉÊ (צΠÐÏ×ÉÎÅÎ ÂÕÔÉ ÈÏÞÁ  %d ̦ÔÅÒ ÚÁ×ÄÏ×ÖËÉ)"
+msgid "France [SECAM]"
+msgstr "æÒÁÎæÑ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Filesystem encryption key"
-msgstr "ôÉРЦÄÒÏÚĦÌÕ: "
+msgid "restrict"
+msgstr "ÏÂÍÅÖÉÔÉ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Type: "
-msgstr "ôÉÐ: "
+msgid "must have"
+msgstr "ÐÏÔÒ¦ÂÎÉÊ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "on channel %d id %d\n"
-msgstr "ÎÁ ÛÉΦ %d id %d\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "ôÉÐ ÔÁÂÌÉæ ЦÄÒÏÚĦ̦×: %s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "äÉÓËÉ LVM %s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Info: "
-msgstr "¶ÎÆÏÒÍÁæÑ: "
+msgid ""
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
+msgstr ""
+"CUPS ΊЦÄÔÒÉÍÕ¤ ÄÒÕË ÎÁ ÐÒÉÎÔÅÒÁÈ ÓÅÒ×ÅÒ¦× Novell ÞÉ ÐÒÉÎÔÅÒ¦×, ÝÏ\n"
+"ÐÅÒÅÄÁÀÔØ ÄÁΦ ÎÁ ÄÒÕË Õ ×ÉÇÌÑĦ ËÏÍÁÎÄ Ú ÄÏצÌØÎÉÍ ÓÉÎÔÁËÓÉÓÏÍ.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "çÅÏÍÅÔÒ¦Ñ: %s ÃÉ̦ÎÄÒ¦×, %s ÇÏÌÏ×ÏË, %s ÓÅËÔÏÒ¦×\n"
+msgid "Senegal"
+msgstr "óÅÎÅÇÁÌ"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Size: %s\n"
-msgstr "òÏÚͦÒ: %s\n"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Command line"
+msgstr "îÁÚ×Á ÄÏÍÅÎÕ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "Read-only"
+msgid ""
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Device: "
-msgstr "ðÒÉÓÔÒ¦Ê: "
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+msgid "access to administrative files"
msgstr ""
-"\n"
-"ãÅ ÓÐÅæÁÌØÎÉÊ Ð¦ÄÒÏÚÄ¦Ì ÄÌÑ \n"
-"ÍÏÖÌÉ×ÏÓÔ¦ ÐÏÄצÊÎÏÇÏ \n"
-"ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ.\n"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakbackup:1
+#, c-format
msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
msgstr ""
-"\n"
-"íÏÖÌÉ×Ï ÃÅÊ Ð¦ÄÒÏÚÄ¦Ì ¤ ЦÄÒÏÚĦÌÏÍ\n"
-"ÄÒÁÊ×ÅÒÁ, ×ÁÍ ÍÁÂÕÔØ ÎÅ ÐÏÔÒ¦ÂÎÏ\n"
-"ÊÏÇÏ ÚͦÎÀ×ÁÔÉ.\n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "îÁÚ×É ÆÁÊÌ¦× Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ: %s"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "äÉÓËÉ RAID %s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "òÏÚÍ¦Ò Ä¦ÌÑÎËÉ %s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Level %s\n"
-msgstr "ò¦×ÅÎØ %s\n"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
+msgid ", multi-function device on parallel port \\#%s"
msgstr ""
-"ð¦ÄÒÏÚĦÌ, ÑËÉÊ ÂÕÄÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ\n"
-" (ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ äïóÕ, ÎÅ ÄÌÑ lilo)\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Loopback file(s):\n"
-" %s\n"
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-"æÁÊÌ(É) Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ: \n"
-" %s\n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mounted\n"
-msgstr "úÍÏÎÔÏ×ÁÎÉÊ\n"
+msgid "Montserrat"
+msgstr "íÏÎÓÅÒÒÁÔ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Not formatted\n"
-msgstr "îÅ ÆÏÒÍÁÔÏ×ÁÎÉÊ\n"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Formatted\n"
-msgstr "æÏÒÍÁÔÏ×ÁÎÉÊ\n"
+msgid "Swap"
+msgstr "Swap"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "÷¦Ä ÃÉ̦ÎÄÒÕ %d ÄÏ ÃÉ̦ÎÄÒÕ %d \n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s ÓÅËÔÏÒ¦×"
+msgid "Connecting to the Internet "
+msgstr "ú'¤ÄÎÁÔÉÓÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Size: %s"
-msgstr "òÏÚͦÒ: %s"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Other"
+msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÆÁÊÌÕ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "ðÏÞÁÔÏË: ÓÅËÔÏÒ %s\n"
+msgid "TV card"
+msgstr "ôÅÌÅצڦÊÎÁ ÐÌÁÔÁ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Name: "
-msgstr "îÁÚ×Á: "
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "ðÒÉÎÔÅÒ ÎÁ ÓÅÒ×ÅÒ¦ SMB/Windows 95/98/NT "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "ì¦ÔÅÒÁ × äïó¦: %s (ÐÒÉÐÕÝÅÎÎÑ)\n"
+msgid ", "
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "partition %s is now known as %s"
+msgid ""
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "÷ÉÄÁÌÅÎÎÑ LPD..."
+msgid "Remove selected host/network"
+msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Copying %s"
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
msgstr ""
+"Postfix - ÃÅ ÐÒÏÇÒÁÍÁ ÄÌÑ ÐÅÒÅÄÁÞ¦ ÅÌÅËÔÒÏÎÎϧ ÐÏÛÔÉ (Mail Transport\n"
+"Agent), ÑËÁ ÐÅÒÅÄÁ¤ ÐÏÛÔÏצ ÐÏצÄÏÍÌÅÎÎÑ ×¦Ä ÏÄÎÏÇÏ ËÏÍÐ'ÀÔÅÒÁ ÄÏ\n"
+"¦ÎÛÏÇÏ."
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Moving files to the new partition"
-msgstr "îÅÄÏÓÔÁÔÎØÏ ×¦ÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ ÄÌÑ ÎÏ×ÉÈ Ð¦ÄÒÏÚĦ̦×"
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "Disconnection from the Internet failed."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Hide files"
-msgstr "ÚÂ¦Ê Õ mkraid"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Move files to the new partition"
-msgstr "îÅÄÏÓÔÁÔÎØÏ ×¦ÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ ÄÌÑ ÎÏ×ÉÈ Ð¦ÄÒÏÚĦ̦×"
+msgid "Network Hotplugging"
+msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
+msgid "if set to yes, reports check result to tty."
msgstr ""
-"ð¦ÓÌÑ ÆÏÒÍÁÔÕ×ÁÎÎÑ Ð¦ÄÒÏÚĦÌÕ %s, ×Ó¦ ÄÁΦ ÎÁ ÃØÏÍÕ Ð¦ÄÒÏÚĦ̦ \n"
-"ÂÕÄÕÔØ ×ÔÒÁÞÅΦ"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "ýÏ ÚͦÎÉ ÐÏÞÁÌÉ Ä¦ÑÔÉ ÷ÁÍ ÓÌ¦Ä ÐÅÒÅ×ÁÎÔÁÖÉÔÉ ËÏÍÐ'ÀÔÅÒ"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "ôÁÂÌÉÃÑ Ð¦ÄÒÏÚÄ¦Ì¦× ÄÉÓËÕ %s ÂÕÄÅ ÚÁÐÉÓÁÎÏ ÎÁ ÄÉÓË"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore From CD"
+msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÄÉÓËÅÔÉ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "ñ˦ ÐÁËÅÔÉ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ?"
+msgid ""
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"ôÅÐÅÒ Ð¦ÓÌÑ ÔÏÇÏ, ÑË ÐÁÒÁÍÅÔÒÉ ÷ÁÛÏÇÏ Ú'¤ÄÎÁÎÎÑ Ú ¶ÎÔÅÒÎÅÔÏÍ\n"
+"×ÓÔÁÎÏ×ÌÅΦ, ÷É ÍÏÖÅÔÅ ÓËÏƦ­ÕÒÕ×ÁÔÉ Ó×¦Ê ËÏÍÐ'ÀÔÅÒ ÔÁËÉÍ ÞÉÎÏÍ, ÝÏÂ\n"
+"צΠÄÏÚ×ÏÌÑ× ÓЦÌØÎÅ ×ÉËÏÒÉÓÔÁÎÎÑ Ó×ÏÇÏ Ú'¤ÄÎÁÎÎÑ ÄÏ\n"
+"¶ÎÔÅÒÎÅÔÕ. \n"
+"\n"
+"ðÒÉͦÔËÁ: ÷ÁÍ ÄÌÑ ÃØÏÇÏ ÐÏÔÒ¦ÂÎÏ ÍÁÔÉ ÐÌÁÔÕ ÍÅÒÅÖ¦, ÝÏ ÎÁÓÔÒϧÔÉ\n"
+"ÌÏËÁÌØÎÕ ÍÅÒÅÖÕ (LAN)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "ôÉРЦÄÒÏÚĦ̦×?"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr ""
+"÷ÉÂÅÒ¦ÔØ ÑËÕ ÐÌÁÔÕ ÍÅÒÅÖ¦ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÁÔÉ ÄÌÑ Ú'¤ÄÎÁÎÎÑ Ú\n"
+"¶ÎÔÅÒÎÅÔÏÍ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "ïÂÅÒÅÖÎÏ: ÃÑ ÏÐÅÒÁÃ¦Ñ ÎÅÂÅÚÐÅÞÎÁ."
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "chunk size"
-msgstr "ÒÏÚÍ¦Ò Ä¦ÌÑÎËÉ"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "level"
-msgstr "Ò¦×ÅÎØ"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÉÍËÎÅÎÅ"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "device"
-msgstr "ÐÒÉÓÔÒ¦Ê"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Various"
-msgstr "ò¦ÚÎÏÍÁΦÔÎÅ"
+msgid "Latin American"
+msgstr "ìÁÔÉÎÏ-ÁÍÅÒÉËÁÎÓØËÁ"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Mount options"
-msgstr "ðÁÒÁÍÅÔÒÉ ÍÏÎÔÕ×ÁÎÎÑ:"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "îÁÓÔÒϧÔÉ ÍÅÒÅÖÕ"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Old device file"
+msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "æÁÊÌ ×ÖÅ ¦ÓÎÕ¤. ëÏÒÉÓÔÕ×ÁÔÉÓÑ ÎÉÍ?"
+msgid "Info: "
+msgstr "¶ÎÆÏÒÍÁæÑ: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, fuzzy, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr ""
-"¶ÎÛÉÊ ÐÒÉÓÔÒ¦Ê Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ ×ÖÅ ËÏÒÉÓÔÕ¤ÔØÓÑ ÃÉÍ\n"
-"ÆÁÊÌÏÍ. ÷ÉÂÅÒ¦ÔØ ¦ÎÛÉÊ."
+msgid "Button `%s': %s"
+msgstr "ðÁÒÁÍÅÔÒÉ: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Give a file name"
-msgstr "äÁÊÔÅ ÎÁÚ×Õ ÆÁÊÌÕ"
+msgid "Please wait"
+msgstr "úÁÞÅËÁÊÔÅ, ÂÕÄØ-ÌÁÓËÁ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Filesystem type: "
-msgstr "ôÉРЦÄÒÏÚĦÌÕ: "
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Size in MB: "
-msgstr "òÏÚÍ¦Ò (íÂ): "
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "None"
+msgstr "úÁ˦ÎÞÅÎÏ"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Loopback file name: "
-msgstr "îÁÚ×Á ÆÁÊÌÕ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ: "
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The entered IP is not correct.\n"
+msgstr "÷ÓŠצÒÎÏ?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Loopback"
-msgstr "ú×ÏÒÏÔΤ ÍÏÎÔÕ×ÁÎÎÑ"
+msgid "Ethernet Card"
+msgstr "ðÌÁÔÁ Ethernet"
-#: ../../diskdrake/interactive.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "ãÅÊ Ð¦ÄÒÏÚÄ¦Ì ÎÅ ÍÏÖÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ ÄÌÑ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ"
+msgid "Info"
+msgstr "¶ÎÆÏÒÍÁæÑ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "LVM name?"
-msgstr "îÁÚ×Á LVM?"
+msgid "Install"
+msgstr "õÓÔÁÎÏ×ËÁ"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "new"
-msgstr "ÎÏ×ÉÊ"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"ëÌÁÃΦÔØ ÎÁ ËÎÏÐæ \"çÁÒÁÚÄ\", ÑËÝÏ ×É ÈÏÞÅÔÅ ÓÔÅÒÔÉ ×Ó¦ ÄÁΦ ÔÁ\n"
+"ЦÄÒÏÚĦÌÉ ÎÁ ÃØÏÍÕ ÖÏÒÓÔËÏÍÕ ÄÉÓËÕ. âÕÄØÔÅ Õ×ÁÖΦ: ЦÓÌÑ ÔÏÇÏ, ÑË ÷É\n"
+"ÎÁÔÉÓÎÅÔÅ ÎÁ \"çÁÒÁÚÄ\" ×É ÎÅ ÚÍÏÖÅÔŠצÄÎÏ×ÉÔÉ ÖÏÄΦ ÄÁΦ ÞÉ\n"
+"ЦÄÒÏÚĦÌÉ, Ñ˦ ÍÁÀÔØÓÑ ÎÁ ÃØÏÍÕ ÄÉÓËÕ, ×ËÌÀÞÁÀÞÉ ÔÁËÏÖ ¦ ÄÁΦ\n"
+"÷¦ÎÄÏ×Ó.\n"
+"\n"
+"ñËÝÏ ÷É ×ÉÒ¦ÛÉÌÉ ×¦ÄͦÎÉÔÉ ÃÀ ÏÐÅÒÁæÀ, ÎÁÔÉÓΦÔØ ËÌÁצÛÕ\n"
+"÷¦ÄͦÎÉÔÉ. ð¦ÄÒÏÚĦÌÉ ¦ ÄÁΦ ÎÁ ÄÉÓËÕ ÚÁÌÉÛÁÔØÓÑ ÂÅÚ ÚͦÎ."
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "÷ÉÂÅÒ¦ÔØ ¦ÓÎÕÀÞÉÊ LVM, ÄÏ ÑËÏÇÏ ÄÏÄÁÔÉ"
+msgid "Exit install"
+msgstr "÷ÉÊÔÉ Ú ÕÓÔÁÎÏ×ËÉ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "÷ÉÂÅÒ¦ÔØ ¦ÓÎÕÀÞÉÊ RAID, ÄÏ ÑËÏÇÏ ÄÏÄÁÔÉ"
+msgid ""
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
+msgstr ""
+"÷ÓÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ. \n"
+"\n"
+"÷É ÍÏÖÅÔÅ ÓЦÌØÎÏ ËÏÒÉÓÔÕ×ÁÔÉÓÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ÒÁÚÏÍ Ú ¦ÎÛÉÍÉ\n"
+"ËÏÍÐ'ÀÔÅÒÁÍÉ × ×ÁÛ¦Ê ÌÏËÁÌØÎ¦Ê ÍÅÒÅÖ¦, Ú ×ÉËÏÒÉÓÔÁÎÎÑÍ Á×ÔÏÍÁÔÉÞÎÏÇÏ\n"
+"ËÏÎƦ­ÕÒÕ×ÁÎÎÑ ÍÅÒÅÖ¦ (DHCP)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Moving partition..."
-msgstr "ðÅÒÅͦÝÁÀ ЦÄÒÏÚĦÌ..."
+msgid "Remote CUPS server"
+msgstr "÷¦ÄÄÁÌÅÎÉÊ ÓÅÒ×ÅÒ CUPS"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Moving"
-msgstr "ðÅÒÅͦÝÅÎÎÑ"
+msgid "Sun - Mouse"
+msgstr "íÉÛÁ Sun"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "îÁ ÑËÉÊ ÓÅËÔÏÒ ÐÅÒÅͦÓÔÉÔÉÓÑ?"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+"õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÐÒÉÓÕÔÎ¦Ê Ô¦ÌØËÉ ÏÄÉÎ ÁÄÁÐÔÅÒ ÍÅÒÅÖ¦:\n"
+"\n"
+"%s\n"
+"\n"
+"úÁÒÁÚ ÂÕÄÅ ×ÓÔÁÎÏ×ÌÅÎÁ ÌÏËÁÌØÎÁ ÍÅÒÅÖÁ Ú ÃÉÍ ÁÄÁÐÔÅÒÏÍ."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Sector"
-msgstr "óÅËÔÏÒ"
+msgid "Minimal install"
+msgstr "í¦Î¦ÍÁÌØÎÁ ÕÓÔÁÎÏ×ËÁ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "îÁ ÑËÉÊ ÄÉÓË ×É ÈÏÞÅÔÅ ÐÅÒÅͦÓÔÉÔÉÓÑ?"
+msgid "Ethiopia"
+msgstr "åƦÏЦÑ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Move"
-msgstr "ðÅÒÅͦÓÔÉÔÉ"
+msgid "Devanagari"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "New size in MB: "
-msgstr "îÏ×ÉÊ ÒÏÚÍ¦Ò (íÂ): "
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "÷ÉÂÅÒ¦ÔØ ÎÏ×ÉÊ ÒÏÚͦÒ"
+msgid "Total size: %d / %d MB"
+msgstr "úÁÇÁÌØÎÉÊ ÒÏÚͦÒ: %d / %d í "
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Resize"
-msgstr "úͦÎÉÔÉ ÒÏÚͦÒ"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "disabled"
+msgstr "ÚÁÂÏÒÏÎÉÔÉ"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"ð¦ÓÌÑ ÚͦÎÉ ÒÏÚͦÒÕ Ð¦ÄÒÏÚĦÌÕ %s, ×Ó¦ ÄÁΦ ÎÁ ÃØÏÍÕ Ð¦ÄÒÏÚĦ̦ ÂÕÄÕÔØ\n"
-"×ÔÒÁÞÅΦ"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Search for new scanners"
+msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "ðÏÔÒ¦ÂÎÏ ÚÂÅÒÅÇÔÉ ×Ó¦ ÄÁΦ ÎÁ ÃØÏÍÕ Ð¦ÄÒÏÚĦ̦"
+msgid "Disabling servers..."
+msgstr "úÁÂÏÒÏÎÁ ÓÅÒ×ÅÒ¦×..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
+
+#: ../../standalone/drakboot:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "òÏÚÍ¦Ò ÃØÏÇÏ Ð¦ÄÒÏÚĦÌÕ ÎÅÍÏÖÌÉ×Ï ÚͦÎÉÔÉ"
+msgid "Installation of %s failed. The following error occured:"
+msgstr "õÓÔÁÎÏ×ËÁ %s ÎÅÕÓЦÛÎÁ. óÔÁÌÁÓÑ ÐÏÍÉÌËÁ:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "ïÂÞÉÓÌÀÀ ÍÅÖ¦ ЦÄÒÏÚĦÌÕ FAT"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_any.pm:1
#, fuzzy, c-format
-msgid "Where do you want to mount %s?"
-msgstr "äÅ ×É ÈÏÞÅÔÅ ÚÍÏÎÔÕ×ÁÔÉ ÐÒÉÓÔÒ¦Ê %s?"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
msgstr ""
-"îÅ ÍÏÖÕ ÚͦÎÉÔÉ ÔÏÞËÕ ÍÏÎÔÕ×ÁÎÎÑ ÄÁÎÏÇÏ ÒÏÚĦÌÕ, ÏÓ˦ÌØËÉ ×¦Î\n"
-"×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÄÌÑ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ. óÐÏÞÁÔËÕ ×¦ÄͦΦÔØ\n"
-"Ú×ÏÒÏÔΤ ÍÏÎÔÕ×ÁÎÎÑ."
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "äÅ ×É ÈÏÞÅÔÅ ÚÍÏÎÔÕ×ÁÔÉ ÐÒÉÓÔÒ¦Ê %s?"
+"÷É ×ÉÂÒÁÌÉ ÔÁ˦(ÉÊ) ÓÅÒ×ÅÒ(É): %s\n"
+"\n"
+"㦠ÓÅÒ×ÅÒÉ ÓÔÁÎÄÁÒÔÎÏ ÁËÔÉצÚÏ×ÁΦ. äÌÑ ÎÉÈ ÎÅצÄÏͦ ΦÑ˦ ÐÒÏÂÌÅÍÉ Ú\n"
+"ÂÅÚÐÅËÏÀ, ÁÌÅ ÄÅÑ˦ ÍÏÖÕÔØ ÂÕÔÉ ×ÉÑ×ÌÅΦ. ÷ ÔÁËÏÍÕ ×ÉÐÁÄËÕ ×É ÐÏ×ÉÎΦ\n"
+"ÑËÏÍÏÇÁ Û×ÉÄÛÅ ÐÏÎÏ×ÉÔÉ ×ÅÒÓ¦§ ÃÉÈ ÓÅÒ×ÅÒ¦×. \n"
+"\n"
+"÷É ÈÏÞÅÔÅ ÄÏÚ×ÏÌÉÔÉ ÕÓÔÁÎÏ×ËÕ ÃÉÈ ÓÅÒ×ÅÒ¦×?\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "äÅ ×É ÈÏÞÅÔÅ ÚÍÏÎÔÕ×ÁÔÉ ÆÁÊÌ Ú×ÏÒÏÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ %s?"
+msgid "Network printer (TCP/Socket)"
+msgstr "ðÒÉÎÔÅÒ × ÍÅÒÅÖ¦ (ÓÏËÅÔ)"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "ðÅÒÅÍÉËÁÀÓØ Ú ext2 ÎÁ ext3"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup User files..."
+msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "ñËÕ ÆÁÊÌÏ×Õ ÓÉÓÔÅÍÕ ×É ×ÉÂÉÒÁ¤ÔÅ?"
+msgid "Install system"
+msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Change partition type"
-msgstr "úͦÎÉÔÉ ÔÉРЦÄÒÏÚĦÌÕ"
+msgid "First DNS Server (optional)"
+msgstr "ðÅÒÛÉÊ ÓÅÒ×ÅÒ DNS (ÎÅÏÂÏ×'ÑÚËÏ×Ï)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"Alternatively, you can specify a device name/file name in the input line"
msgstr ""
-"ð¦ÓÌÑ ÚͦÎÉ ÔÉÐÕ Ð¦ÄÒÏÚĦÌÕ ÄÉÓËÕ %s, ×Ó¦ ÄÁΦ ÎÁ ÃØÏÍÕ Ð¦ÄÒÏÚĦ̦ \n"
-"ÂÕÄÕÔØ ×ÔÒÁÞÅΦ"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Remove the loopback file?"
-msgstr "óÔÅÒÔÉÆÁÊÌÕ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ?"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "dhcpd Config..."
+msgstr "ëÏÎƦÇÕÒÁæÑ..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+msgid "The setup has already been done, but it's currently disabled."
msgstr ""
+"õÓÔÁÎÏ×ËÁ ÓЦÌØÎÏÇÏ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÖÅ ÚÒÏÂÌÅÎÁ,\n"
+"ÁÌÅ ÎÁ ÄÁÎÉÊ ÍÏÍÅÎÔ ×ÏÎÏ ×¦ÄËÌÀÞÅÎÏ."
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Preference: "
-msgstr "õÓÔÁÎÏ×ËÉ: "
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Start sector: "
-msgstr "ðÏÞÁÔÏË (ÓÅËÔÏÒ): "
+msgid "LILO/grub Installation"
+msgstr "õÓÔÁÎÏ×ËÁ LILO/grub"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "óÔ×ÏÒÉÔÉ ÎÏ×ÉÊ ÒÏÚĦÌ"
+msgid "Israeli"
+msgstr "¶ÚÒÁ§ÌØÓØËÁ"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Use for loopback"
-msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÄÌÑ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "load setting"
+msgstr "ÆÏÒÍÁÔÕ×ÁÎÎÑ"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Modify RAID"
-msgstr "úͦÎÉÔÉ RAID"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "÷ÉÍÉËÁÀ ÍÅÒÅÖÕ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Remove from LVM"
-msgstr "÷ÉÄÁÌÉÔÉ Ú LVM"
+msgid "Floppy can be removed now"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Remove from RAID"
-msgstr "÷ÉÄÁÌÉÔÉ Ú RAID"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "í¦Î¦ÍÁÌØÎÁ ÕÓÔÁÎÏ×ËÁ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add to LVM"
-msgstr "äÏÄÁÔÉ ÄÏ LVM"
+msgid "Denmark"
+msgstr "äÁΦÑ"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Add to RAID"
-msgstr "äÏÄÁÔÉ ÄÏ RAID"
+msgid "Moving partition..."
+msgstr "ðÅÒÅͦÝÁÀ ЦÄÒÏÚĦÌ..."
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Format"
-msgstr "æÏÒÍÁÔÕ×ÁÔÉ"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "(This) DHCP Server IP"
+msgstr "IP ÁÄÒÅÓÁ CUPS ÓÅÒ×ÅÒÁ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "äÅÔÁÌØÎÁ ¦ÎÆÏÒÍÁæÑ"
+msgid "Test of the configuration"
+msgstr "ôÅÓÔÕ×ÁÎÎÑ ËÏÎƦ­ÕÒÁæ§"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr "ðÒÏÂÕÀ צÄÎÏ×ÉÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing %s ..."
+msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÕ %s"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"÷ÓÔÁ×ÔÅ ÄÉÓËÅÔÕ × ÄÉÓËÏצÄ\n"
-"÷Ó¦ ÄÁΦ ÎÁ Ã¦Ê ÄÉÓËÅÔ¦ ÂÕÄÕÔØ ×ÔÒÁÞÅΦ"
-
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "ðÏÐÅÒÅÄÖÅÎÎÑ"
+"¶ ÎÁÒÅÛÔ¦, × ÚÁÌÅÖÎÏÓÔ¦ ×¦Ä ÔÏÇÏ, ÞÉ ÷É ×ÉÂÒÁÌÉ ¦ÎÄÉצÄÕÁÌØÎÉÊ ×ɦÒ\n"
+"ÐÁËÅÔ¦× ÞÉ Î¦, ÷ÁÍ ÂÕÄÅ ÐÏËÁÚÁÎÏ ÐÏ×ÎÅ ÄÅÒÅ×Ï ÐÁËÅÔ¦× Ú¦ÂÒÁÎÉÈ ÐÏ\n"
+"ÇÒÕÐÁÈ ¦ ЦÄÇÒÕÐÁÈ. ðÅÒÅÇÌÑÄÁÀÞÉ ÐÁËÅÔÉ ÷É ÚÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÐÏ×Φ\n"
+"ÇÒÕÐÉ, ЦÄÇÒÕÐÉ ÔÁ ¦ÎÄÉצÄÕÁÌØΦ ÐÁËÅÔÉ.\n"
+"\n"
+"ëÏÖÎÏÇÏ ÒÁÚÕ, ËÏÌÉ ÷É ×ÉÂÉÒÁ¤ÔÅ ÐÁËÅÔ × ÄÅÒÅצ, Ú'Ñ×ÌÁ¤ÔØÓÑ Ð¦ÄËÁÚËÁ,\n"
+"ÐÒÁ×ÏÒÕÞ ×¦Ä ÎÁÚ×É. \n"
+" \n"
+"ð¦ÓÌÑ ÔÏÇÏ, ÑË ÷É ÚÁ˦ÎÞÉÌÉ ×ÉÂ¦Ò ÐÁËÅÔ¦×, ÎÁÔÉÓΦÔØ ËÎÏÐËÕ\n"
+"÷ÓÔÁÎÏ×ÉÔÉ. ðÏÞÎÅÔØÓÑ ×ÌÁÓÎÅ ÕÓÔÁÎÏ×ËÁ ÓÉÓÔÅÍÉ. ñËÝÏ Ë¦ÌØ˦ÓÔØ\n"
+"×ÉÂÒÁÎÉÈ ÐÁËÅÔ¦× ×ÅÌÉËÁ, ÍÏÖÅÔŠЦÔÉ ÐÏÐÉÔÉ ËÁ×É.\n"
+"\n"
+"!! ñËÝÏ ÁÂÏ ÎÁ×ÍÉÓÎÅ, ÁÂÏ ÑË ÓËÌÁÄÏ×Á ÞÁÓÔÉÎÁ ÑËϧÓØ ÇÒÕÐÉ, ÂÕÌÏ\n"
+"×ÉÂÒÁÎÏ ÄÌÑ ÕÓÔÁÎÏ×ËÉ ÐÅ×Φ ÓÅÒ×ÅÒÉ, ÷ÁÍ ÂÕÄÅ ÚÁÄÁÎÅ ÚÁÐÉÔÁÎÎÑ, ÞÉ ÷É\n"
+"ÓÐÒÁ×Ħ ÂÁÖÁ¤ÔÅ ÂÁÞÉÔÉ Ã¦ ÓÅÒ×ÅÒÉ ×ÓÔÁÎÏ×ÌÅÎÉÍÉ. ÷ íÁÎÄÒÅÊËÕ ×Ó¦\n"
+"×ÓÔÁÎÏ×ÌÅΦ ÓÅÒ×ÅÒÉ Á×ÔÏÍÁÔÉÞÎÏ ÚÁÐÕÓËÁÀÔØÓÑ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ\n"
+"ÓÉÓÔÅÍÉ. îÁצÔØ, ÑËÝÏ ÎÁ ÞÁÓ ËÕЦ×̦ ÓÉÓÔÅÍÉ ÎÅ ÂÕÌÏ ×¦ÄÏÍÏ ÐÒÏÂÌÅÍ Ú\n"
+"ÂÅÚÐÅËÏÀ ÄÁÎÉÈ ÓÅÒ×ÅÒ¦×, ÍÏÖÌÉ×Ï, ÝÏ × Ð¦ÚΦÛÉÊ ÞÁÓ ÔÁ˦ ÐÒÏÂÌÅÍÉ\n"
+"ÂÕÄÕÔØ ×ÉÑ×ÌÅΦ. ïÓÏÂÌÉ×Ï, ÑËÝÏ ÷É ÎÅ ÚÎÁ¤ÔÅ ÐÒÏ ÝÏ ÊÄÅ ÍÏ×Á,\n"
+"ÎÁÔÉÓΦÔØ ÔÕÔ ÎÁ î¦. ñËÝÏ ÷É ÎÁÔÉÓÎÅÔÅ ôÁË, ÓÅÒ×ÅÒÉ ÂÕÄÕÔØ ×ÓÔÁÎÏ×ÌÅΦ\n"
+"¦ ×ÍÉËÎÅΦ ÎÅÑ×ÎÏ!!\n"
+"\n"
+"ïÐÃ¦Ñ á×ÔÏÍÁÔÉÞΦ ÚÁÌÅÖÎÏÓÔ¦ ÚÁÂÏÒÏÎѤ ÐÏÐÅÒÅÄÖÅÎÎÑ ËÏÌÉ ÐÒÏÇÒÁÍÁ\n"
+"ÕÓÔÁÎÏ×ËÉ ÚÎÁÈÏÄÉÔØ, ÝÏ Ô¦ÌØËÉ ÝÏ ×ÉÂÒÁÎÉÊ (ÞÉ ×¦ÄͦÎÅÎÉÊ ×ɦÒ) ÐÁËÅÔ\n"
+"ÚÁÌÅÖÉÔØ ×¦Ä ¦ÎÛÏÇÏ ÐÁËÅÔÕ.\n"
+"\n"
+"íÁÌÅÎØËÁ ЦËÔÏÇÒÁÍÁ ÇÎÕÞËÏÇÏ ÄÉÓËÁ × ÓÁÍÏÍÕ ÎÉÚÕ ÓÐÉÓËÕ ÄÏÚ×ÏÌѤ\n"
+"ÚÁ×ÁÎÔÁÖÉÔÉ ÓÐÉÓÏË ÐÁËÅÔ¦× Ú ÄÉÓËÅÔÉ, ÑËÝÏ ÐÒÉ ÐÏÐÅÒÅÄÎ¦Ê ÕÓÔÁÎÏ×æ ÷É\n"
+"ÚÂÅÒÅÇÌÉ ÊÏÇÏ ÎÁ ÄÉÓËÅÔÕ. ð¦ÓÌÑ ÎÁÔÉÓËÁÎÎÑ Ã¦¤§ ËÎÏÐËÉ, ÓÉÓÔÅÍÁ\n"
+"ÐÏÐÒÏÓÉÔØ ×ÓÔÁ×ÉÔÉ ÄÉÓËÅÔÕ ¦Ú ÓÐÉÓËÏÍ ÐÁËÅÔ¦× Õ ÐÒÉצÄ. äÏÄÁÔËÏ×Ï ÷É\n"
+"ÍÏÖÅÔÅ ÏÔÒÉÍÁÔÉ ¦ÎÆÏÒÍÁæÀ ÐÒÏ ÔÅ, ÑË ÓÔ×ÏÒÉÔÉ ÔÁËÕ ÄÉÓËÅÔÕ × ÄÒÕǦÊ\n"
+"ÐÏÒÁĦ ÏÓÔÁÎÎØÏÇÏ ÐÕÎËÔÕ."
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Select file"
-msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
+msgid "Choose your filesystem encryption key"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""
-"á×ÁÒ¦ÊÎÁ ÔÁÂÌÉÃÑ Ð¦ÄÒÏÚÄ¦Ì¦× ÍÁ¤ ¦ÎÛÉÊ ÒÏÚͦÒ\n"
-"ðÒÏÄÏ×ÖÕ×ÁÔÉ?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Removable media automounting"
-msgstr "á×ÔÏÍÁÔÉÞÎÅ ÍÏÎÔÕ×ÁÎÎÑ ÚͦÎÎÉÈ ÎÏÓ¦§×"
+msgid "Andorra"
+msgstr "áÎÄÏÒÁ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Reload partition table"
-msgstr "ðÒÏÞÉÔÁÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×"
+msgid "Sierra Leone"
+msgstr "óؤÒÒÁ-ìÅÏÎÅ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "á×ÁÒ¦ÊÎÁ ÔÁÂÌÉÃÑ Ð¦ÄÒÏÚĦ̦×"
+msgid "Botswana"
+msgstr "âÏÔÓ×ÁÎÁ"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Restore partition table"
-msgstr "÷¦ÄÎÏ×ÉÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "(default value: %s)"
+msgstr " (ïÓÎÏ×ÎÁ)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Save partition table"
-msgstr "úÁÐÉÓÁÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×"
+msgid "Alternative test page (Letter)"
+msgstr "äÏÄÁÔËÏ×Á ÔÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ (Letter)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
msgstr ""
-"ýÏ ÍÁÔÉ Â¦ÌØÛŠЦÄÒÏÚĦ̦×, Ú¦ÔÒ¦ÔØ ÏÄÉÎ ¦Ú ÔÉÈ, ÝÏ ¤. ð¦ÓÌÑ ÃØÏÇÏ\n"
-"×É ÍÏÖÅÔÅ ÓÔ×ÏÒÉÔÉ ÚÁͦÓÔØ ÎØÏÇÏ Ë¦ÌØËÁ ÒÏÚÛÉÒÅÎÉÈ Ð¦ÄÒÏÚĦ̦×"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "I can't add any more partition"
-msgstr "îÅ ÍÏÖÕ ÄÏÄÁÔÉ ÖÏÄÎÏÇÏ Ð¦ÄÒÏÚĦÌÕ"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "All primary partitions are used"
-msgstr "÷Ó¦ ÏÓÎÏ×Φ ЦÄÒÏÚĦÌÉ ÚÁÊÎÑÔ¦"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Hard drive information"
-msgstr "¶ÎÆÏÒÍÁÃ¦Ñ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Auto allocate"
-msgstr "á×ÔÏÍÁÔÉÞÎÏ ÒÏÚÐÏĦÌÉÔÉ"
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Choose an X server"
+msgstr "÷ÉÂÅÒ¦ÔØ X ÓÅÒ×ÅÒ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Clear all"
-msgstr "ïÞÉÓÔÉÔÉ ×ÓÅ"
+msgid "Swap partition size in MB: "
+msgstr "òÏÚÍ¦Ò Ð¦ÄÒÏÚĦÌÕ ÄÌÑ Ó×ÏЦÎÇÕ × íÂ: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "þÉ ×É ÈÏÞÅÔÅ ÚÁÐÉÓÁÔÉ ËÏÎƦ­ÕÒÁæÀ /etc/fstab?"
+msgid ""
+"Other (not drakbackup)\n"
+"keys in place already"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "÷ÉÊÔÉ ÂÅÚ ÚÁÐÉÓÕ ÔÁÂÌÉæ ЦÄÒÏÚĦ̦×?"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No changes to backup!"
+msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Quit without saving"
-msgstr "÷ÉÊÔÉ ÂÅÚ ÚÁÐÉÓÕ"
+msgid "Formatted\n"
+msgstr "æÏÒÍÁÔÏ×ÁÎÉÊ\n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Continue anyway?"
-msgstr "÷ÓÅ-ÔÁËÉ ÐÒÏÄÏ×ÖÕ×ÁÔÉ?"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Type of install"
+msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔ ÄÌÑ ÕÓÔÁÎÏ×ËÉ"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Toggle to expert mode"
-msgstr "ú×ÉÞÁÊÎÉÊ > åËÓÐÅÒÔ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "ðÒÉÎÔÅÒ ÎÁ ÓÅÒ×ÅÒ¦ SMB/Windows 95/98/NT "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "åËÓÐÅÒÔ > ú×ÉÞÁÊÎÉÊ"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Undo"
-msgstr "îÁÚÁÄ"
+msgid "%d comma separated numbers"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Exit"
-msgstr "÷ÉȦÄ"
+msgid ""
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
+msgstr ""
+"ðÒÏÔÏËÏÌ rusers ÄÁ¤ ÍÏÖÌÉצÓÔØ ËÏÒÉÓÔÕ×ÁÞÁÍ × ÍÅÒÅÖ¦ ÏÔÒÉÍÕ×ÁÔÉ\n"
+"¦ÎÆÏÒÍÁæÀ ÐÒÏ ÔÅ, ÈÔÏ Ú ËÏÒÉÓÔÕ×ÁÞ¦× ÚÁÒŤÓÔÒÏ×ÁÎÉÊ ÎÁ ÓÉÓÔÅÍÁÈ, ÝÏ\n"
+"צÄÐÏצÄÁÀÔØ ÎÁ ÚÁÐÉÔÉ."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Choose a partition"
-msgstr "÷ÉÂÅÒ¦ÔØ Ð¦ÄÒÏÚĦÌ"
+msgid "Automatic Steps Configuration"
+msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ËÒÏË¦× ÕÓÔÁÎÏ×ËÉ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Choose another partition"
-msgstr "óÔ×ÏÒÉÔÉ ¦ÎÛÉÊ Ð¦ÄÒÏÚĦÌ"
+msgid ""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
+msgstr ""
-#: ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Change type"
-msgstr "úͦÎÉÔÉ ÔÉÐ"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Search servers"
-msgstr "óÅÒ×ÅÒ DNS"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain"
-msgstr "äÏÍÅÎ NIS"
+msgid "Barbados"
+msgstr "âÁÒÂÁÄÏÓ"
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Username"
-msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
+msgid "Please select data to backup..."
+msgstr "÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÍÏ×Õ."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain Authentication Required"
-msgstr "á×ÔÅÎÔÉËÁæÑ"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Another one"
-msgstr "¶ÎÔÅÒÎÅÔ"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Which username"
-msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
+msgid "received"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "cpu # "
-msgstr ""
+msgid "/File/_New"
+msgstr "/æÁÊÌ/îÏ×ÉÊ"
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "SMBus controllers"
-msgstr ""
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The DNS Server IP"
+msgstr "IP ÁÄÒÅÓÁ CUPS ÓÅÒ×ÅÒÁ"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "USB controllers"
+msgid "IP Range End:"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr ""
+msgid "High"
+msgstr "÷ÉÓÏËÉÊ"
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Firewire controllers"
-msgstr ""
+msgid "NoVideo"
+msgstr "âÅÚ÷¦ÄÅÏ"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "(E)IDE/ATA controllers"
+msgid "this field describes the device"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Joystick"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Scanner"
-msgstr "÷ÉÂÅÒ¦ÔØ ÇÒÁƦÞÎÕ ÐÌÁÔÕ"
+msgid "Local Printers"
+msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Unknown/Others"
-msgstr "úÁÇÁÌØÎÅ"
+msgid "Installation image directory"
+msgstr "Xpmac (ÄÒÁÊ×ÅÒ ÄÉÓÐÌÅÑ ÄÌÑ ÕÓÔÁÎÏ×ËÉ)"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr ""
+msgid "NIS Server"
+msgstr "óÅÒ×ÅÒ NIS"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Modem"
-msgstr "íÏÄÕÌØ"
+msgid "Port: %s"
+msgstr "ðÏÒÔ"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Ethernetcard"
-msgstr "ðÌÁÔÁ Ethernet"
+#: ../../lang.pm:1
+#, c-format
+msgid "Spain"
+msgstr "¶ÓÐÁΦÑ"
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Processors"
-msgstr ""
+msgid "This user name has already been added"
+msgstr "ãÅ ¦Í'Ñ ×ÖÅ ÚÁÊÎÑÔÅ"
-#: ../../harddrake/data.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Webcam"
-msgstr ""
+msgid "Choose a file"
+msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Soundcard"
-msgstr "ú×ÕËÏ×Á ÐÌÁÔÁ"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Apply"
+msgstr "úÁÓÔÏÓÕ×ÁÔÉ"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Other MultiMedia devices"
-msgstr "¶ÎÛ¦"
+msgid "Auto-detect available ports"
+msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Tvcard"
-msgstr "ôÅÌÅצڦÊÎÁ ÐÌÁÔÁ"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing currently disabled"
+msgstr "óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÉÍËÎÅÎÅ"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Videocard"
-msgstr "÷¦ÄÅÏ ÒÅÖÉÍ"
+#: ../../lang.pm:1
+#, c-format
+msgid "San Marino"
+msgstr "óÁÎ íÁÒ¦ÎÏ"
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, fuzzy, c-format
-msgid "Tape"
-msgstr "ôÉÐ"
+msgid "Belgium"
+msgstr "âÅÌØǦÊÓØËÁ"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr ""
+msgid "Kuwait"
+msgstr "ëÕ×ÅÊÔ"
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "CD/DVD burners"
-msgstr ""
+msgid "Choose the window manager to run:"
+msgstr "÷ÉÂÅÒ¦ÔØ ÍÅÎÅÄÖÅÒ ×¦ËÏÎ, ÑËÉÍ ×É ÈÏÞÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "CDROM"
+msgid "sub generation of the cpu"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Disk"
-msgstr "äÁÔÓØËÁ"
+msgid "First Time Wizard"
+msgstr "ìÁÓËÁ×Ï ÐÒÏÓÉÍÏ ÄÏ ÐÅÒÛÏÇÏ ÚÁÐÕÓËÕ ðÏͦÞÎÉËÁ"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Zip"
+msgid ""
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
+"óÔÁÌÁÓÑ ÐÏÍÉÌËÁ, ÁÌÅ Ñ ÎÅ ÚÎÁÀ, ÑË Ú ÎÅÀ ÐÏ×ÏÄÉÔÉÓÑ.\n"
+"ðÒÏÄÏ×ÖÕÊÔÅ ÎÁ Ó×¦Ê ×ÌÁÓÎÉÊ ÒÉÚÉË."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "please wait, parsing file: %s"
+msgstr "ÂÕÄØ ÌÁÓËÁ ÚÁÖĦÔØ, ÐÒÏÈÏÄÖÅÎÎÑ ÆÁÊÌÕ: %s"
+
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Floppy"
-msgstr "úÁÐÉÓÁÔÉ ÎÁ ÄÉÓËÅÔÕ"
+msgid "Taiwan"
+msgstr "ôÁÊÌÁÎÄ"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Let me pick any driver"
+msgid "Pakistan"
+msgstr "ðÁ˦ÓÔÁÎ"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Driver:"
-msgstr "äÒÁÊ×ÅÒ"
+msgid "Permissions"
+msgstr "÷ÅÒÓ¦Ñ: %s\n"
-#: ../../harddrake/sound.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
+msgid "Provider name (ex provider.net)"
+msgstr "îÁÚ×Á ÐÒÏ×ÁÊÄÅÒÁ (ÔÏÂÔÏ provider.net)"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
+msgid "Version: %s\n"
+msgstr "÷ÅÒÓ¦Ñ: %s\n"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
+"÷ÁÛÁ ÓÉÓÔÅÍÁ ÍÁ¤ ÚÁÍÁÌÏ ÒÅÓÕÒÓ¦×. ÷É ÍÏÖÅÔÅ ÍÁÔÉ ÐÒÏÂÌÅÍÉ Ú ÕÓÔÁÎÏ×ËÏÀ\n"
+"Mandrake ì¦ÎÁËÓÁ. ñËÝÏ ÃÅ ÓÔÁÎÅÔØÓÑ, ×É ÍÏÖÅÔÅ ÓÐÒÏÂÕ×ÁÔÉ ÕÓÔÁÎÏ×ËÕ ×\n"
+"ÔÅËÓÔÏ×ÏÍÕ ÒÅÖÉͦ. äÌÑ ÃØÏÇÏ Ð¦Ä ÞÁÓ ÚÁ×ÁÎÔÁÖÅÎÎÑ ËÏÍÐÁËÔ-ÄÉÓËÕ\n"
+"ÎÁÔÉÓΦÔØ F1 ¦ ÐÏÔ¦Í ××ÅĦÔØ \"text\"."
-#: ../../harddrake/sound.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Sound trouble shooting"
-msgstr ""
+msgid "Use the Windows partition for loopback"
+msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ Ð¦ÄÒÏÚÄ¦Ì Windows ÄÌÑ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ"
-#: ../../harddrake/sound.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr ""
+msgid "Armenian (typewriter)"
+msgstr "÷¦ÒÍÅÎÓØËÁ (ÄÒÕËÁÒÓØËÁ ÍÁÛÉÎËÁ)"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Connection type: "
+msgstr "ôÉÐ Ú×'ÑÚËÕ:"
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Unkown driver"
-msgstr "îÅצÄÏÍÁ ÍÏÄÅÌØ"
+msgid "Graphical interface"
+msgstr "óÔÁÒÔÕ×ÁÔÉ X Á×ÔÏÍÁÔÉÞÎÏ"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr ""
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s Ú ÁÐÁÒÁÔÎÉÍ ÐÒÉÓËÏÒÅÎÎÑÍ ÔÒØÏÈ×ÉͦÒÎϧ ÇÒÁƦËÉ"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No known driver"
-msgstr ""
+msgid "India"
+msgstr "¶ÎĦÑ"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
+msgid "Chad"
+msgstr "þÁÄ"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No open source driver"
-msgstr ""
+msgid "Slovakia"
+msgstr "óÌÏ×Á˦Ñ"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "úÁÞÅËÁÊÔÅ, ÂÕÄØ ÌÁÓËÁ. ôÅÓÔÕ×ÁÎÎÑ ËÏÎƦ­ÕÒÁæ§"
+msgid "Singapore"
+msgstr "ó¦ÎÇÁÐÕÒ"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
-msgstr ""
+msgid "Cambodia"
+msgstr "ëÁÍÂÏÄÖÁ"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Trouble shooting"
+msgid "Monitor HorizSync: %s\n"
+msgstr "çÏÒÉÚÏÎÔÁÌØÎÁ ÓÉÎÈÒÏΦÚÁÃ¦Ñ ÍÏΦÔÏÒÁ: %s\n"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Path"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-#: ../../harddrake/sound.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
+"Printer %s\n"
+"What do you want to modify on this printer?"
msgstr ""
+"ðÒÉÎÔÅÒ %s: %s %s\n"
+"ýÏ ÐÏÔÒ¦ÂÎÏ ÚͦÎÉÔÉ ÄÌÑ ÃØÏÇÏ ÐÒÉÎÔÅÒÁ?"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Sound configuration"
-msgstr "ëÏÎƦ­ÕÒÁæÑ"
+msgid "Add host"
+msgstr "äÏÄÁÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "No alternative driver"
+msgid ""
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "enable radio support"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
msgstr ""
+"âÕÄØ ÌÁÓËÁ, ×ÉÂÅÒ¦ÔØ ÚÁÐÉÓ/ÚÁ×ÁÎÔÁÖÅÎÎÑ ×ÉÂÏÒÕ ÐÁËÅÔ¦× ÎÁ ÄÉÓËÅÔÕ.\n"
+"æÏÒÍÁÔ ÄÉÓÔÅÔÉ ÔÁËÉÊ-ÖÅ, ÑË ¦ ÄÉÓËÅÔÉ auto_install."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Radio support:"
+msgid "China (broadcast)"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "PLL setting:"
-msgstr "ÆÏÒÍÁÔÕ×ÁÎÎÑ"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr ""
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Number of capture buffers:"
-msgstr ""
+msgid "Use quota for backup files."
+msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Tuner type:"
-msgstr "úͦÎÉÔÉ ÔÉÐ"
+msgid "Configuring printer \"%s\"..."
+msgstr "îÁÓÔÒÏÀÀ ÐÒÉÎÔÅÒ \"%s\"..."
-#: ../../harddrake/v4l.pm:1
-#, fuzzy, c-format
-msgid "Card model:"
-msgstr "ðÁÍ'ÑÔØ ËÁÒÔËÉ (DMA)"
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Internet connection"
+msgstr "ú'¤ÄÎÁÎÎÑ Ú ÔÅÎÅÔÁÍÉ"
-#: ../../harddrake/v4l.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
+"úÁ×ÁÎÔÁÖÅÎÎÑ ÍÏÄÕÌÑ %s ÎÅÕÓЦÛÎÅ.\n"
+"èÏÞÅÔÅ ÓÐÒÏÂÕ×ÁÔÉ ¦ÎÛ¦ ÐÁÒÁÍÅÔÒÉ?"
-#: ../../harddrake/v4l.pm:1
-#, fuzzy, c-format
-msgid "Unknown|Generic"
-msgstr "úÁÇÁÌØÎÅ"
-
-#: ../../harddrake/v4l.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgid "Welcome to the Open Source world."
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr ""
+msgid "Bosnia and Herzegovina"
+msgstr "âÏÓÎ¦Ñ ÔÁ çÅÒÃÅÇÏ×ÉÎÁ"
-#: ../../harddrake/v4l.pm:1
+#: ../../fsedit.pm:1
#, fuzzy, c-format
-msgid "Auto-detect"
-msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
+msgid ""
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
+msgstr ""
+"äÌÑ Ã¦¤§ ÔÏÞËÉ ÍÏÎÔÕ×ÁÎÎÑ ÷ÁÍ ÐÏÔÒ¦ÂÎÁ ÓÐÒÁ×ÖÎÑ ÆÁÊÌÏ×Á ÓÉÓÔÅÍÁ (ext2,\n"
+"reiserfs)\n"
-#: ../../interactive/newt.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Do"
-msgstr "úÁ˦ÎÞÅÎÏ"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "÷ÉÐÒÏÂÕÊÔÅ ÍÉÛËÕ, ÂÕÄØ-ÌÁÓËÁ"
-#: ../../interactive/stdio.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "÷ÁÛ ×ɦÒ? (ÒÅËÏÍÅÎÄÏ×ÁÎÉÊ %s) "
+msgid "Netherlands"
+msgstr "çÏÌÁÎĦÑ"
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "îÅ×ÄÁÌÉÊ ×ɦÒ, ÓÐÒÏÂÕÊÔÅ ÝÅ ÒÁÚ\n"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "úÁÐÉÓÁÔÉ × ÆÁÊÌ"
-#: ../../interactive/stdio.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Re-submit"
-msgstr ""
+msgid "Internal ISDN card"
+msgstr "÷ÎÕÔÒ¦ÛÎÑ ÐÌÁÔÁ ISDN"
-#: ../../interactive/stdio.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"=> Notice, a label changed:\n"
-"%s"
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
msgstr ""
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Title"
+msgstr "ôÁÂÌÉÃÑ"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
+msgid "Install & convert Fonts"
msgstr ""
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "÷ÁÛ ×ɦÒ? (ÒÅËÏÍÅÎÄÏ×ÁÎÉÊ %s) "
-
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid " enter `void' for void entry"
+msgid "WARNING"
msgstr ""
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Do you want to click on this button?"
-msgstr "þÉ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ aboot?"
-
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "ðÁÒÁÍÅÔÒÉ: %s"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installing bootloader"
+msgstr "÷ÓÔÁÎÏ×ÌÀÀ ÂÌÏË ÚÁ×ÁÎÔÁÖÅÎÎÑ"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "÷ÁÛ ×ɦÒ? (ÒÅËÏÍÅÎÄÏ×ÁÎÉÊ %s) "
-
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
+msgid "replay"
+msgstr "ðÏ×ÔÏÒÉÔÉ"
-#: ../../modules/interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"úÁ×ÁÎÔÁÖÅÎÎÑ ÍÏÄÕÌÑ %s ÎÅÕÓЦÛÎÅ.\n"
-"èÏÞÅÔÅ ÓÐÒÏÂÕ×ÁÔÉ ¦ÎÛ¦ ÐÁÒÁÍÅÔÒÉ?"
+msgid "detected %s"
+msgstr "ÚÎÁÊÄÅÎÏ %s"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Specify options"
-msgstr "÷ËÁÖ¦ÔØ ÏÐæ§"
+msgid "Virgin Islands (U.S.)"
+msgstr "÷¦ÒǦÎÓØ˦ ÏÓÔÒÏ×É (óûá)"
-#: ../../modules/interactive.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "á×ÔÏÔÅÓÔ"
+msgid "Bad backup file"
+msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-#: ../../modules/interactive.pm:1
-#, c-format
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"÷ ÄÅÑËÉÈ ×ÉÐÁÄËÁÈ ÄÒÁÊ×ÅÒ %s ×ÉÍÁÇÁ¤ ÄÏÄÁÔËÏ×ϧ ¦ÎÆÏÒÍÁæ§ ÄÌÑ ÔÏÇÏ,\n"
-"ÝÏ צÒÎÏ ÐÒÁÃÀ×ÁÔÉ, ÈÏÞÁ Ú×ÉÞÁÊÎÏ ÐÒÁÃÀ¤ ÎÏÒÍÁÌØÎÏ ÂÅÚ Îŧ. þÉ ÎÅ\n"
-"ÈÏÔ¦ÌÉ Â ×É ×ËÁÚÁÔÉ ÄÏÄÁÔËÏצ ÏÐæ§ ÄÌÑ ÎØÏÇÏ ÞÉ ÄÏÚ×ÏÌÉÔÉ ÄÒÁÊ×ÅÒÕ\n"
-"×ÉÐÒÏÂÕ×ÁÔÉ ÷ÁÛÕ ÓÉÓÔÅÍÕ, ÝÏ ÚÎÁÊÔÉ ÐÏÔÒ¦ÂÎÕ ¦ÎÆÏÒÍÁæÀ? ¶ÎËÏÌÉ ÔÁËÅ\n"
-"×ÉÐÒÏÂÏ×Õ×ÁÎÎÑ ÍÏÖÅ ÐÒÉ×ÅÓÔÉ ÄÏ ÚÁ×ÉÓÁÎÎÑ ËÏÍÐ'ÀÔÅÒÁ, ÁÌÅ ÎÅ ÐÏ×ÉÎÎÏ\n"
-"ΦÑË ÚÁÛËÏÄÉÔÉ ÊÏÍÕ."
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "ñËÉÊ ÄÒÁÊ×ÅÒ %s ÍÅΦ ÓÐÒÏÂÕ×ÁÔÉ?"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Module options:"
-msgstr "ïÐæ§ ÍÏÄÕÌÑ:"
+"õÓÔÁÎÏ×ËÁ ÓЦÌØÎÏÇÏ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÖÅ\n"
+"ÚÒÏÂÌÅÎÁ. óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ × ÄÁÎÉÊ ÍÏÍÅÎÔ ×ÉÍËÎÅÎÅ.\n"
+"\n"
+"ýÏ ÷É ÂÁÖÁ¤ÔÅ ÚÒÏÂÉÔÉ?"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-"×É ÍÏÖÅÔÅ ÔÅÐÅÒ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÊÏÇÏ ÏÐæ§ × ÍÏÄÕ̦ %s.\n"
-"ïÐæ§ ÍÁÀÔØ ÆÏÒÍÁÔ ``ÎÁÚ×Á=×ÅÌÉÞÉÎÁ ÎÁÚ×Á2=×ÅÌÉÞÉÎÁ2 ...''.\n"
-"îÁÐÒÉËÌÁÄ, ``io=0x300 irq=7''"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Pipe into command"
+msgstr "ðÅÒÅÎÁÐÒÁ×ÉÔÉ ÒÏÂÏÔÕ ÐÏ ËÁÎÁÌÕ × ËÏÍÁÎÄÕ"
+
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
+"äÅÑ˦ Ú ÁÐÁÒÁÔÎÉÈ ÚÁÓÏÂ¦× ÎÁ ÷ÁÛÏÍÕ ËÏÍÐ'ÀÔÅÒ¦ ×ÉÍÁÇÁÀÔØ ÄÒÁÊ×ÅÒ¦×\n"
+"ƦÒÍ-×ÉÇÏÔÏ×ÌÀ×ÁÞ¦× ÄÌÑ ÔÏÇÏ, ÝÏ ÐÒÁÃÀ×ÁÔÉ ×¦ÒÎÏ. \n"
+"\n"
+"÷É ÍÏÖÅÔÅ ÚÎÁÊÔÉ ÐÏÔÒ¦ÂÎÕ ¦ÎÆÏÒÍÁæÀ ÐÒÏ ÎÉÈ ÎÁ: %s"
-#: ../../modules/interactive.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "(module %s)"
-msgstr "(ÍÏÄÕÌØ %s)"
+msgid "Detecting devices..."
+msgstr "÷ÉÚÎÁÞÁÀ ÐÒÉÓÔÒϧ..."
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "÷ÓÔÁÎÏ×ÌÀÀ ÄÒÁÊ×ÅÒ ÄÌÑ %s ÐÌÁÔÉ %s"
+msgid "Click here to launch the wizard ->"
+msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "See hardware info"
-msgstr "ðÅÒÅÇÌÑÎØÔÅ ¦ÎÆÏÒÍÁæÀ ÐÒÏ ÁÐÁÒÁÔÎÅ ÚÁÂÅÚÐÅÞÅÎÎÑ"
+msgid "Haiti"
+msgstr "çÁ¦Ô¦"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "þÉ ×É ÍÁ¤ÔÅ ÂÕÄØ-Ñ˦ %s ¦ÎÔÅÒÆÅÊÓÉ?"
+msgid ""
+"Description of the fields:\n"
+"\n"
+msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do you have another one?"
-msgstr "þÉ ×É ÍÁ¤ÔÅ ¦ÎÛ¦?"
+msgid "the name of the CPU"
+msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "úÎÁÊÄÅΦ ¦ÎÔÅÒÆÅÊÓÉ %s %s"
+msgid "Refreshing printer data..."
+msgstr "ðÏÎÏ×ÌÀÀ ÄÁΦ ÐÒÉÎÔÅÒ¦× ..."
-#: ../../modules/interactive.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
+msgid "You must also format %s"
msgstr ""
-#: ../../modules/parameters.pm:1
-#, fuzzy, c-format
-msgid "comma separated strings"
-msgstr "æÏÒÍÁÔÕ×ÁÔÉ Ð¦ÄÒÏÚĦÌÉ"
-
-#: ../../modules/parameters.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "comma separated numbers"
-msgstr ""
+msgid "Be careful: this operation is dangerous."
+msgstr "ïÂÅÒÅÖÎÏ: ÃÑ ÏÐÅÒÁÃ¦Ñ ÎÅÂÅÚÐÅÞÎÁ."
-#: ../../modules/parameters.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr ""
+msgid "Insert a floppy containing package selection"
+msgstr "÷ÓÔÁ×ÔÅ ÄÉÓËÅÔÕ, Ú ÚÁÐÉÓÁÎÉÍ ÓÐÉÓËÏÍ ÐÁËÅÔ¦×"
-#: ../../modules/parameters.pm:1
-#, c-format
-msgid "%d comma separated numbers"
-msgstr ""
+#: ../../diskdrake/dav.pm:1
+#, fuzzy, c-format
+msgid "Server: "
+msgstr "óÅÒ×ÅÒ"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "a number"
-msgstr "îÏÍÅÒ ÔÅÌÅÆÏÎÕ"
+msgid "Security Alerts:"
+msgstr "÷ÓÔÁÎÏ×ÌÅÎÎÑ Ò¦×ÎÑ ÂÅÚÐÅËÉ"
-#: ../../network/adsl.pm:1
-#, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Sweden"
+msgstr "äÉ×ÉÓØ"
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+msgid "Use Expect for SSH"
msgstr ""
-"îÁʦÌØÛ ÐÏÛÉÒÅÎÉÊ ÓÐÏӦ Ú'¤ÄÎÁÎÎÑ ÞÅÒÅÚ adsl - ÃÅ ÚÁ ÄÏÐÏÍÏÇÏÀ\n"
-"pppoe. ïÄÎÁË, ÄÅÑ˦ Ú'¤ÄÎÁÎÎÑ ËÏÒÉÓÔÕÀÔØÓÑ Ô¦ÌØËÉ pptp, ÎÅ×ÅÌÉËÁ\n"
-"˦ÌØ˦ÓÔØ ËÏÒÉÓÔÕ¤ÔØÓÑ dhcp. ñËÝÏ ÷É ÎÅ ÚÎÁ¤ÔÅ ÎÁÐÅ×ÎÅ ×ÉÂÅÒ¦ÔØ\n"
-"\"×ÖÉ×ÁÔÉ pppoe\"."
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connect to the Internet"
-msgstr "ú'¤ÄÎÁÔÉÓÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
+msgid "Poland"
+msgstr "ðÏÌØÝÁ"
-#: ../../network/adsl.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr ""
+msgid "Importance: %s\n"
+msgstr "÷ÁÖÌÉצÓÔØ: %s\n"
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "speedtouch usb"
-
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "use dhcp"
-msgstr "ËÏÒÉÓÔÕ×ÁÔÉÓÑ dhcp"
-
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "use pptp"
-msgstr "×ÖÉ×ÁÔÉ pptp"
-
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "use pppoe"
-msgstr "×ÖÉ×ÁÔÉ pppoe"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
msgid "Other ports"
msgstr "ôÅÓÔÕÀ ÐÏÒÔÉ"
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Everything (no firewall)"
-msgstr ""
-
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+msgid "number of capture buffers for mmap'ed capture"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+msgid "SMBus controllers"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr ""
+msgid "Connection timeout (in sec)"
+msgstr "úÁÔÒÉÍËÁ ÐÅÒÅÄ ÚÁËÒÉÔÔÑÓ Ú×'ÑÚËÕ (ÓÅË)"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"íÁÎÀÓ¦ÎØËÉÊ ÂÒÁÎÄÍÁÕÅÒ\n"
-"\n"
-"㦠ÕÓÔÁÎÏ×ËÉ ËÏÎƦ­ÕÒÕÀÔØ ÐÅÒÓÏÎÁÌØÎÉÊ ÂÒÁÎÄÍÁÕÅÒ (a.k.a. firewall) ÎÁ\n"
-"ÄÁÎ¦Ê ÍÁÛÉΦ Ú ì¦ÎÁËÓ íÁÎÄÒÅÊË. äÌÑ ÔÏÇÏ, ÝÏ ×ÓÔÁÎÏ×ÉÔÉ ÓÅÒÊÏÚÎÉÊ\n"
-"ÐÏÔÕÖÎÉÊ ÂÒÁÎÄÍÁÕÅÒ, Ú×ÅÒΦÔØÓÑ, ÂÕÄØ ÌÁÓËÁ, ÄÏ ÓÐÅæÁ̦ÚÏ×ÁÎÏÇÏ\n"
-"ÄÉÓÔÒÉÂÕÔÉ×Á MandrakeSecurity Firewall."
-
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "No network card"
-msgstr "ÎÅ ÚÎÁÊÄÅÎÁ ÐÌÁÔÁ ÍÅÒÅÖ¦"
-
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "POP and IMAP Server"
-msgstr "óÅÒ×ÅÒ LDAP"
-
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "Mail Server"
-msgstr "âÁÚÁ ÄÁÎÉÈ"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Croatian"
+msgstr "èÏÒ×ÁÔÓØËÁ"
-#: ../../network/drakfirewall.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Domain Name Server"
-msgstr "îÁÚ×Á ÄÏÍÅÎÕ"
+msgid "Use existing partition"
+msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ ¦ÓÎÕÀÞÉÍ Ð¦ÄÒÏÚĦÌÏÍ"
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Web Server"
-msgstr "óÅÒ×ÅÒ"
+msgid "Unable to contact mirror %s"
+msgstr "îÅÍÏÖÌÉ×Ï ×ÉËÏÎÁÔÉ fork: %s"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr ""
+msgid "/Help/_About..."
+msgstr "/ð¦ÄËÁÚËÁ/ðÒÏ..."
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Host name"
-msgstr "îÁÚ×Á ÈÏÓÔÁ"
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "îÁÚ×Á ÈÏÓÔÁ"
+msgid "Remove user directories before restore."
+msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Configuring network"
-msgstr "ëÏÎƦÇÕÒÕÀ ÍÅÒÅÖÕ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "úͦÎÉÔÉ ËÏÎƦÇÕÒÁæÀ ÐÒÉÎÔÅÒÁ"
-#: ../../network/ethernet.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
+msgid "could not find any font in your mounted partitions"
msgstr ""
-"÷ÉÂÅÒ¦ÔØ ÑËÕ ÐÌÁÔÕ ÍÅÒÅÖ¦ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÁÔÉ ÄÌÑ Ú'¤ÄÎÁÎÎÑ Ú\n"
-"¶ÎÔÅÒÎÅÔÏÍ"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose the network interface"
-msgstr "÷ÉÂÅÒ¦ÔØ ¦ÎÔÅÒÆÅÊÓ ÍÅÒÅÖ¦"
+msgid "F00f bug"
+msgstr ""
-#: ../../network/ethernet.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÓËÏÎƦ­ÕÒÏ×ÁÎÏÇÏ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦ ethernet. îÅ\n"
-"ÍÏÖÎÁ ×ÓÔÁÎÏ×ÉÔÉ Ú'¤ÄÎÁÎÎÑ ÃØÏÇÏ ÔÉÐÕ."
+msgid "XFree %s"
+msgstr "XFree86 %s"
#: ../../network/ethernet.pm:1
#, c-format
@@ -9199,1192 +8855,1355 @@ msgstr ""
"ñËÉÊ dhcp Ë̦¤ÎÔ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ?\n"
"óÔÁÎÄÁÒÔÎÉÊ Ë̦¤ÎÔ - dhcp-client"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "îÅ ÚÎÁÊÄÅÎÏ ÐÌÁÔÉ ISDN PCI. ÷ÉÂÅÒ¦ÔØ ÏÄÎÕ ¦Ú ÐÌÁÔ Õ ÎÁÓÔÕÐÎÏÍÕ ×¦ËΦ."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
-msgstr ""
-"úÎÁÊÄÅÎÁ ISDN PCI ÐÌÁÔÁ, ÁÌÅ ÎÅצÄÏÍÏÇÏ ÔÉÐÕ. ÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÏÄÎÕ Ú "
-"ÐÌÁÔ PCI ÎÁ ÎÁÓÔÕÐÎÏÍÕ ÅËÒÁΦ."
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Domain Name:"
+msgstr "îÁÚ×Á ÄÏÍÅÎÕ"
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "ñËÁ ÷ÁÛÁ ISDN ÐÌÁÔÁ?"
+msgid "On Floppy"
+msgstr "úÁÐÉÓÁÔÉ ÎÁ ÄÉÓËÅÔÕ"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "ISDN Configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ISDN"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore"
+msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÆÁÊÌÕ"
-#: ../../network/isdn.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Abort"
-msgstr "÷¦ÄͦÎÉÔÉ"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Continue"
-msgstr "ðÒÏÄÏ×ÖÕ×ÁÔÉ"
+msgid "Looking for available packages..."
+msgstr "ûÕËÁÀ ÎÁÑ×Φ ÐÁËÅÔÉ"
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"ñËÝÏ ÷É ÍÁ¤ÔÅ ÐÌÁÔÕ ISA, ÚÎÁÞÅÎÎÑ ÎÁ ÎÁÓÔÕÐÎÏÍÕ ÅËÒÁΦ ÍÁÀÔØ ÂÕÔÉ\n"
-"ËÏÒÅËÔÎÉÍÉ.\n"
-"\n"
-"ñËÝÏ ÷É ÍÁ¤ÔÅ ÐÌÁÔÕ PCMCIA, ÷É ÐÏ×ÉÎΦ ÚÎÁÔÉ IRQ ÔÁ IO ÷ÁÛϧ ÐÌÁÔÉ.\n"
+msgid "Init Message"
+msgstr "ðÏצÄÏÍÌÅÎÎÑ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "I don't know"
-msgstr "îÅ ÚÎÁÀ"
+msgid "Rescue partition table"
+msgstr "á×ÁÒ¦ÊÎÁ ÔÁÂÌÉÃÑ Ð¦ÄÒÏÚĦ̦×"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "PCI"
-msgstr "PCI"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection complete."
+msgstr "û×ÉÄ˦ÓÔØ Ú×'ÑÚËÕ"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Cyprus"
+msgstr "ë¦ÐÒ"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "ñËÉÊ ÔÉÐ ËÁÒÔËÉ ÷É ÍÁ¤ÔÅ"
+msgid "Remove from RAID"
+msgstr "÷ÉÄÁÌÉÔÉ Ú RAID"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
+"ãÅÊ ÐÁÒÏÌØ ÚÁÎÁÄÔÏ ÐÒÏÓÔÉÊ (צΠÐÏ×ÉÎÅÎ ÂÕÔÉ ÈÏÞÁ  %d ̦ÔÅÒ ÚÁ×ÄÏ×ÖËÉ)"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "ñËÉÊ ÐÒÏÔÏËÏÌ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ?"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Configuration Wizards"
+msgstr "ðÏͦÞÎÉË ËÏÎƦÇÕÒÁæ§ ÍÅÒÅÖ¦"
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "ðÒÏÔÏËÏÌ ÄÌÑ ×ÓØÏÇÏ ¦ÎÛÏÇÏ ÓצÔÕ"
+msgid "ISDN connection"
+msgstr "ú'¤ÄÎÁÎÎÑ ISDN"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+msgid "primary"
msgstr ""
-"ðÒÏÔÏËÏÌ ÄÌÑ ×ÓØÏÇÏ ¦ÎÛÏÇÏ ÓצÔÕ \n"
-" ÂÅÚ D-ËÁÎÁÌÕ (×ÉĦÌÅÎÉÈ Ì¦Î¦Ê)"
-
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "European protocol"
-msgstr "´×ÒÏÐÅÊÓØËÉÊ ÐÒÏÔÏËÏÌ"
-#: ../../network/isdn.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "´×ÒÏÐÅÊÓØËÉÊ ÐÒÏÔÏËÏÌØ (EDSS1)"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr ""
-#: ../../network/isdn.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
+"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
-"÷ÉÂÅÒ¦ÔØ Ó×ÏÇÏ ÐÒÏ×ÁÊÄÅÒÁ.\n"
-"ñËÝÏ ÊÏÇÏ ÎÅÍÁ¤ × ÓÐÉÓËÕ, ×ÉÂÅÒ¦ÔØ ¶ÎÛÉÊ"
+"÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ Ñ˦ ÓÅÒצÓÉ ÂÕÄÕÔØ ÚÁÐÕÓËÁÔÉÓÑ Á×ÔÏÍÁÔÉÞÎÏ ÐÒÉ\n"
+"ÓÔÁÒÔ¦ ÓÉÓÔÅÍÉ. \n"
+"\n"
+"ôÕÔ ÎÁÄÁ¤ÔØÓÑ ÓÐÉÓÏË ×Ó¦È ÓÌÕÖÂ, ÝÏ ÍÏÖÕÔØ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉÓÑ ÐÒÏÇÒÁÍÏÀ\n"
+"ÕÓÔÁÎÏ×ËÉ. ðÅÒÅÇÌÑÎØÔÅ Õ×ÁÖÎÏ Ã¦ ÓÌÕÖÂÉ ¦ צÄͦΦÔØ ×ÉÂ¦Ò ÔÉÈ, Ñ˦ ÎÅ\n"
+"ÐÏ×ÉÎΦ ÚÁÐÕÓËÁÔÉÓÑ ÐÒÉ ÓÔÁÒÔ¦ ÓÉÓÔÅÍÉ.\n"
+"\n"
+"ëÏÌÉ ÷ÁÛÁ ÍÉÛËÁ ÎÁÓÕ×Á¤ÔØÓÑ ÎÁ ÏÄÉÎ ¦Ú ÐÕÎËÔ¦×, ÎÅ×ÅÌÉÞËÁ ËÕÌØËÁ ¦Ú\n"
+"ЦÄÓËÁÚËÏÀ Ú'Ñ×ÉÔØÓÑ, ÑËÁ ÏÐÉÓÕ¤ ÆÕÎËæ§ ÄÁÎÏÇÏ ÓÅÒצÓÕ.\n"
+"\n"
+"âÕÄØÔÅ ÏÓÏÂÌÉ×Ï Õ×ÁÖÎÉÍÉ, ÑËÝÏ ×É ÚÂÉÒÁ¤ÔÅÓØ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÃÀ\n"
+"ÓÉÓÔÅÍÕ ÑË ÓÅÒ×ÅÒ: ÎÁÐÅ×ÎÅ ÎÅ ÐÏÔÒ¦ÂÎÏ ÓÔÁÒÔÕ×ÁÔÉ Î¦Ñ˦ ÓÅÒצÓÉ, Ñ˦\n"
+"ÎÅ ÂÕÄÕÔØ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ. ðÁÍ'ÑÔÁÊÔÅ, ÂÕÄØ-ÌÁÓËÁ, ÝÏ ÄÅÑ˦ ×ÍÉËÎÅΦ\n"
+"ÓÅÒצÓÉ ÍÏÖÕÔØ ÂÕÔÉ ÎÅÂÅÚÐÅÞÎÉÍÉ ÎÁ ÓÅÒ×ÅÒ¦.\n"
+"ñË ÚÁÇÁÌØÎÅ ÐÒÁ×ÉÌÏ, ×ÉÂÉÒÁÊÔÅ Ô¦ÌØËÉ Ô¦ ÓÅÒצÓÉ, Ñ˦ ÷ÁÍ ÓÐÒÁ×Ħ \n"
+"ÎÅÏÂȦÄΦ."
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "External ISDN modem"
-msgstr "úÏ×ΦÛÎ¦Ê ÍÏÄÅÍ ISDN"
+msgid "Skip"
+msgstr "ðÒÏÐÕÓÔÉÔÉ"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "÷ÎÕÔÒ¦ÛÎÑ ÐÌÁÔÁ ISDN"
+msgid "Niue"
+msgstr "î¦ÕÅ"
-#: ../../network/isdn.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "ñËÉÊ ÔÉÐ Ú'¤ÄÎÁÎÎÑ ISDN ÷É ÍÁ¤ÔÅ?"
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr ""
+"áËÔÉצÚÕ¤ ÔÁ ÄÅÁËÔÉצÚÕ¤ ×Ó¦ ¦ÎÔÅÒÆÅÊÓÉ ÍÅÒÅÖ¦, Ñ˦ ÎÁÓÔÒϤΦ\n"
+"ÓÔÁÒÔÕ×ÁÔÉ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ."
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "ðÏͦÞÎÉË ËÏÎƦÇÕÒÁæ§ ÍÅÒÅÖ¦"
+msgid ""
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "óÔÁÒÁ ËÏÎƦ­ÕÒÁÃ¦Ñ (isdn4net)"
+msgid "important"
+msgstr "×ÁÖÌÉ×ÉÊ"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "îÏ×Á ËÏÎƦ­ÕÒÁÃ¦Ñ (isdn-light)"
+msgid "Total Progress"
+msgstr ""
-#: ../../network/isdn.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
"\n"
-"We recommand the light configuration.\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
msgstr ""
-"ñËÕ ËÏÎƦ­ÕÒÁæÀ ISDN ÷É ÂÁÖÁ¤ÔÅ ×ÓÔÁÎÏ×ÉÔÉ?\n"
+"DrakX ÓÐÒÏÂÕ¤ צÄÛÕËÁÔÉ ×Ó¦ ÖÏÒÓÔ˦ ÄÉÓËÉ Õ ÓÉÓÔÅͦ ¦ ÏÄÎÏÞÁÓÎÏ\n"
+"צÄÛÕËÁÔÉ ÐÌÁÔÉ PCI SCSI. ñËÝÏ DrakX ÚÎÁÊÄÅ ÐÌÁÔÕ SCSI ¦ ÚÎÁ¤ ÑËÉÊ\n"
+"ÄÒÁÊ×ÅÒ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ Ú Ã¦¤À ÐÌÁÔÏÀ, צΠÁ×ÔÏÍÁÔÉÞÎÏ ×ÓÔÁÎÏ×ÉÔØ ÃÅÊ\n"
+"ÄÒÁÊ×ÅÒ (æ ÄÒÁÊ×ÅÒÉ).\n"
"\n"
-"* óÔÁÒÁ ËÏÎƦ­ÕÒÁÃ¦Ñ ×ÉËÏÒÉÓÔÕ×Õ¤ isdn4net. äÏÓÉÔØ ÐÏÔÕÖΦ ÚÁÓÏÂÉ\n"
-"×ÈÏÄÑÔØ ÄÏ ÓËÌÁÄÕ ÐÁËÅÔÕ, ÁÌÅ ÊÏÇÏ ÄÏÓÉÔØ ÓËÌÁÄÎÏ ÎÁÌÁÇÏÄÉÔÉ, ¦ צΠÎÅ\n"
-"¤ ÓÔÁÎÄÁÒÔÎÉÍ.\n"
+"÷ ÄÅÑËÉÈ ×ÉÐÁÄËÁÈ ÎÅ ×ÓÑ ÁÐÁÒÁÔÕÒÁ ÒÏÚЦÚÎÁ¤ÔØÓÑ ÐÏ×ΦÓÔÀ. ñËÝÏ ×É ÎÅ\n"
+"ÍÁ¤ÔÅ ÐÌÁÔÉ SCSI, ÍÁ¤ÔÅ ISA SCSI ÐÌÁÔÕ, ÁÂÏ PCI SCSI ÐÌÁÔÕ, ÑËÁ ÎÅ\n"
+"ÒÏÚЦÚÎÁ¤ÔØÓÑ DrakX, ÷ÁÍ ÂÕÄÅ ÚÁÄÁÎÅ ÚÁÐÉÔÁÎÎÑ, ÐÒÏ ÔÅ ÞÉ ¤ Õ ÷ÁÛ¦Ê\n"
+"ÓÉÓÔÅͦ SCSI ÐÌÁÔÁ. ñËÝÏ ÔÁËϧ ÐÌÁÔÉ Õ ÷ÁÓ ÎÅÍÁ¤, ÐÒÏÓÔÏ ËÌÁÃΦÔØ ÎÁ\n"
+"\"î¦\". ñËÝÏ ×É ËÌÁÃÎÅÔÅ ÎÁ \"ôÁË\", ÷ÁÍ ÂÕÄÅ ÎÁÄÁÎÏ ÓÐÉÓÏË ÄÒÁÊ×ÅÒ¦×, Ú\n"
+"ÑËÏÇÏ ÷ÁÍ ÔÒÅÂÁ ×ÉÂÒÁÔÉ ÐÏÔÒ¦ÂÎÉÊ.\n"
"\n"
-"* îÏ×Á ËÏÎƦ­ÕÒÁÃ¦Ñ ÐÒÏÓÔ¦ÛÁ ÄÌÑ ÒÏÚÕͦÎÎÑ, ¦ÌØÛ ÓÔÁÎÄÁÒÔÉÚÏ×ÁÎÁ, ÁÌÅ\n"
-"ÍÁ¤ ÍÅÎÛÅ ¦ÎÓÔÒÕÍÅÎÔÁÒ¦À.\n"
+"ñËÝÏ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ ×ÒÕÞÎÕ ×ÉÂÉÒÁÔÉ ÄÒÁÊ×ÅÒ, DrakX ÚÁÐÉÔÁ¤ Õ ÷ÁÓ,\n"
+"ÞÉ ×É ÈÏÞÅÔÅ ×ËÁÚÁÔÉ Ñ˦ÓØ ÐÅ×Φ ÏÐæ§ ÄÌÑ ÄÒÁÊ×ÅÒÁ. ëÒÁÝÅ, ÑËÝÏ ÷É\n"
+"ÄÏÚ×ÏÌÉÔÅ DrakX ×ÉÐÒÏÂÕ×ÁÔÉ ÐÌÁÔÕ, ÝÏ ×ÉÚÎÁÞÉÔÉ ÐÏÔÒ¦ÂΦ\n"
+"ÏÐæ§. ú×ÉÞÎÏ ÃÅ ÐÒÁÃÀ¤ ÎÏÒÍÁÌØÎÏ.\n"
"\n"
-"íÉ ÒÅËÏÍÅÎÄÕ¤ÍÏ ÐÒÏÓÔÕ ËÏÎƦ­ÕÒÁæÀ.\n"
-
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Do nothing"
-msgstr "ÁÌŠΊצÄÐÏצÄÁ¤"
+"ñËÝÏ ÃÅ ÎÅ ÓÐÒÁÃÀ¤, ÷ÁÍ ÓÌ¦Ä ×ËÁÚÁÔÉ ÐÏÔÒ¦ÂΦ ÏÐæ§ ÄÌÑ\n"
+"ÄÒÁÊ×ÅÒÁ. ðÅÒÅÇÌÑÎØÔÅ \"ðÏÓ¦ÂÎÉË ÐÏ ÕÓÔÁÎÏ×æ\" (òÏÚÄ¦Ì 3, ЦÄÒÏÚĦÌ\n"
+"\"úÎÁÈÏÄÖÅÎÎÑ ¦ÎÆÏÒÍÁæ§ ÐÒÏ ÷ÁÛÕ ÁÐÁÒÁÔÕÒÕ\"), Ú ÄÏËÕÍÅÎÔÁæ§ ÐÏ\n"
+"ÁÐÁÒÁÔÎÏÍÕ ÚÁÂÅÚÐÅÞÅÎÎÀ ÁÂÏ Ú ÄÏÍÁÛÎØϧ ÓÔÏÒ¦ÎËÉ ×ÉÒÏÂÎÉËÁ ÁÐÁÒÁÔÕÒÉ\n"
+"ÁÂÏ Ä¦ÚÎÁÊÔÅÓÑ ÐÏÔÒ¦ÂΦ ÐÁÒÁÍÅÔÒÉ Ú Windows (ÑËÝÏ ×É ÍÁ¤ÔÅ ÃÀ ÓÉÓÔÅÍÕ\n"
+"ÎÁ Ó×ϤÍÕ ËÏÍÐ'ÀÔÅÒ¦)."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Install rpm"
-msgstr "õÓÔÁÎÏ×ËÁ"
+msgid "Users"
+msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
-#: ../../network/modem.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
-msgstr ""
+msgid "Aruba"
+msgstr "áÒÕÂÁ"
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Title"
-msgstr "ôÁÂÌÉÃÑ"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Preparing bootloader..."
+msgstr "÷ÓÔÁÎÏ×ÌÀÀ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÉÊ ÂÌÏË"
-#: ../../network/modem.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+msgid "Gateway (e.g. %s)"
msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "äÒÕÇÉÊ ÓÅÒ×ÅÒ DNS(ÎÅÏÂÏ×'ÑÚËÏ×Ï)"
+msgid "The passwords do not match"
+msgstr "ðÁÒÏ̦ Ò¦ÚΦ"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "ðÅÒÛÉÊ ÓÅÒ×ÅÒ DNS (ÎÅÏÂÏ×'ÑÚËÏ×Ï)"
+msgid "Examples for correct IPs:\n"
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Domain name"
-msgstr "îÁÚ×Á ÄÏÍÅÎÕ"
+msgid "Frequency (MHz)"
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install_any.pm:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid ""
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
+msgstr ""
+"äÌÑ ÔÏÇÏ, ÝÏ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÚÁÐÉÓÁΦ ×ÉÂÒÁΦ ÐÁËÅÔÉ, ÚÁ×ÁÎÔÁÖÔÅ\n"
+"ÓÉÓÔÅÍÕ Ú ``linux defcfg=floppy''"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Script-based"
-msgstr "úÁ ÄÏÐÏÍÏÇÏÀ ÓËÒÉÐÔÁ"
+msgid "the number of the processor"
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "þÅÒÅÚ ÔÅÒͦÎÁÌ"
+msgid "Hardware clock set to GMT"
+msgstr "çÏÄÉÎÎÉË ×ÓÔÁÎÏ×ÌÅÎÏ × GMT (ÞÁÓ ÐÏ ½Ò¦ÎצÞÕ)?"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Give a file name"
+msgstr "äÁÊÔÅ ÎÁÚ×Õ ÆÁÊÌÕ"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the port that your printer is connected to."
+msgstr "÷ÉÂÅÒ¦ÔØ ÄÏ ÑËÏÇÏ ÐÏÓ̦ÄÏ×ÎÏÇÏ ÐÏÒÔÁ ЦÄËÌÀÞÅÎÉÊ ÷ÁÛ ÍÏÄÅÍ?"
+
+#: ../../standalone/livedrake:1
#, c-format
-msgid "Login ID"
-msgstr "ID ËÏÒÉÓÔÕ×ÁÞÁ"
+msgid "Change Cd-Rom"
+msgstr "úͦΦÔØ ËÏÍÐÁËÔ-ÄÉÓË"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Phone number"
-msgstr "îÏÍÅÒ ÔÅÌÅÆÏÎÕ"
+msgid "Paraguay"
+msgstr "ðÁÒÁÇ×ÁÊ"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Connection name"
-msgstr "îÁÚ×Á Ú×'ÑÚËÕ"
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr ""
-#: ../../network/modem.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Dialup options"
-msgstr "ðÁÒÁÍÅÔÒÉ Ú×'ÑÚËÕ ÐÏ ÍÏÄÅÍÕ"
+msgid "There's no known driver for your sound card (%s)"
+msgstr ""
-#: ../../network/modem.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "÷ÉÂÅÒ¦ÔØ ÄÏ ÑËÏÇÏ ÐÏÓ̦ÄÏ×ÎÏÇÏ ÐÏÒÔÁ ЦÄËÌÀÞÅÎÉÊ ÷ÁÛ ÍÏÄÅÍ?"
+msgid "force"
+msgstr "ÐÒÉÍÕÓÏ×Ï"
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
+msgid "Exit"
+msgstr "÷ÉȦÄ"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-"ð¦ÓÌÑ ÔÏÇÏ, ÑË ÃÅ ÚÁ˦ÎÞÅÎÏ, ÂÁÖÁÎÏ ÐÅÒÅ×ÁÎÔÁÖÉÔÉ X ÓÅÒ×ÅÒ ÄÌÑ ÔÏÇÏ,\n"
-"ÝÏ ÐÏÚÂÕÔÉÓÑ ÐÒÏÂÌÅÍÉ ¦Ú ÚͦÎÏÀ ÎÁÚ×É ÈÏÓÔÁ."
+"õ ×ÁÓ ÎÅÍÁ¤ ÖÏÄÎÏÇÏ ÓËÏÎƦ­ÕÒÏ×ÁÎÏÇÏ ¦ÎÔÅÒÆÅÊÓÁ.\n"
+"óËÏÎƦ­ÕÒÕÊÔÅ §È ÓÐÏÞÁÔËÕ, ËÌÁÃÎÕ×ÛÉ ÎÁ \"îÁÓÔÒϧÔÉ\""
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"÷¦ÔÁ¤ÍÏ, ËÏÎƦ­ÕÒÁÃ¦Ñ ÍÅÒÅÖ¦ ÚÁ˦ÎÞÅÎÁ.\n"
-"\n"
-"ôÅÐÅÒ ÃÑ ËÏÎƦ­ÕÒÁÃ¦Ñ ÂÕÄÅ ÚÁÓÔÏÓÏ×ÁÎÁ ÄÏ ×ÁÛϧ ÓÉÓÔÅÍÉ.\n"
+msgid "Estonian"
+msgstr "åÓÔÏÎÓØËÁ"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
-"ðÒÏÂÌÅÍÁ ÐÒÉ ÐÅÒÅÚÁÐÕÓËÕ ÍÅÒÅÖ¦:\n"
-"\n"
-"%s"
+"Apache - ÃÅ ÓÅÒ×ÅÒ ÄÌÑ World Wide Web. ÷¦Î ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÄÌÑ ÎÁÄÁÎÎÑ "
+"ÓÅÒצӦ×\n"
+"ÄÌÑ ÆÁÊÌ¦× HTML ÔÁ CGI."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "ñ˦ ÐÁËÅÔÉ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ?"
+msgid "Add/Del Clients"
+msgstr "ë̦¤ÎÔ DHCP"
-#: ../../network/netconnect.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Network configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
+msgid "Choose the network interface"
+msgstr "÷ÉÂÅÒ¦ÔØ ¦ÎÔÅÒÆÅÊÓ ÍÅÒÅÖ¦"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "þÉ ÷É ÈÏÞÅÔŠצÄËÒÉ×ÁÔÉ Ú'¤ÄÎÁÎÎÑ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ?"
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Unknown Model"
+msgstr "îÅצÄÏÍÁ ÍÏÄÅÌØ"
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Internet connection"
-msgstr "ú'¤ÄÎÁÎÎÑ Ú ÔÅÎÅÔÁÍÉ"
+msgid "CD/DVD burners"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
msgstr ""
-"÷É ÎÁÓÔÒϧÌÉ Ë¦ÌØËÁ ÓÐÏÓÏÂ¦× Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÆÏÒÍÁæÊÎÉÍÉ ÔÅÎÅÔÁÍÉ.\n"
-"÷ÉÂÅÒ¦ÔØ ÏÄÉÎ ¦Ú ÎÉÈ, ÑËÉÍ ÷É ÂÕÄÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓØ.\n"
-"\n"
+"ð¦ÄÒÏÚĦÌ, ÑËÉÊ ÂÕÄÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ\n"
+" (ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ äïóÕ, ÎÅ ÄÌÑ lilo)\n"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "÷ÉÂÅÒ¦ÔØ Ú'¤ÄÎÁÎÎÑ, ÑËÅ ÷É ÈÏÞÅÔÅ ÎÁÓÔÒϧÔÉ"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image"
+msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
-#: ../../network/netconnect.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "ÚÎÁÊÄÅÎÏ ÐÌÁÔÁ (É) Ethernet "
+msgid "Firewalling configuration detected!"
+msgstr "úÎÁÊÄÅÎÏ ËÏÎƦ­ÕÒÁæÀ firewall!"
-#: ../../network/netconnect.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "LAN connection"
-msgstr "ú'¤ÄÎÁÎÎÑ ÞÅÒÅÚ ÌÏËÁÌØÎÕ ÍÅÒÅÖÕ"
+msgid "Connection name"
+msgstr "îÁÚ×Á Ú×'ÑÚËÕ"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "cable connection detected"
-msgstr "úÎÁÊÄÅÎÏ ËÁÂÅÌØÎÅ Ú'¤ÄÎÁÎÎÑ"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "ëÁÂÅÌØÎÅ Ú'¤ÄÎÁÎÎÑ"
+msgid "Updating package selection"
+msgstr "úÂÅÒÅÇÔÉ ×ÉÂ¦Ò ÐÁËÅÔ¦×"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "detected"
-msgstr "ÚÎÁÊÄÅÎÏ %s"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "äÅ ×É ÈÏÞÅÔÅ ÚÍÏÎÔÕ×ÁÔÉ ÆÁÊÌ Ú×ÏÒÏÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ %s?"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "ADSL connection"
-msgstr "ú'¤ÄÎÁÎÎÑ ADSL"
+msgid ""
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
+msgstr ""
+"äÉÓËÅÔÁ ÓÔ×ÏÒÅÎÁ ÕÓЦÛÎÏ.\n"
+"÷É ÍÏÖÅÔÅ ÐÏ×ÔÏÒÉÔÉ ÕÓÔÁÎÏ×ËÕ."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the number of buttons the mouse has"
+msgstr "ä×ÏÈ ËÎÏÐÏÞÎÁ"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected %s"
-msgstr "ÚÎÁÊÄÅÎÏ %s"
+msgid ""
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "ú'¤ÄÎÁÎÎÑ ISDN"
+msgid "Replay"
+msgstr "ðÏ×ÔÏÒÉÔÉ"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Winmodem connection"
-msgstr "ú×ÉÞÁÊÎÅ Ú'¤ÄÎÁÎÎÑ ÐÏ ÍÏÄÅÍÕ"
+msgid "Backup other files"
+msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "ÚÎÁÊÄÅÎÏ ÎÁ ÐÏÒÔÕ %s"
+msgid "No floppy drive available"
+msgstr "îÅÍÁ¤ ÐÒÉ×ÏÄÁ ÄÉÓËÅÔÉ"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Normal modem connection"
-msgstr "ú×ÉÞÁÊÎÅ Ú'¤ÄÎÁÎÎÑ ÐÏ ÍÏÄÅÍÕ"
+msgid "Backup files are corrupted"
+msgstr ""
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Detecting devices..."
-msgstr "÷ÉÚÎÁÞÁÀ ÐÒÉÓÔÒϧ..."
+msgid "TV norm:"
+msgstr ""
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Expert Mode"
-msgstr "åËÓÐÅÒÔÎÉÊ ÒÅÖÉÍ"
+msgid "Cpuid family"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
+msgid "32 MB"
+msgstr "32 íÂ"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÒÏƦÌØ ÄÌÑ ËÏÎƦÇÕÒÁæ§:"
+msgid "Lithuanian AZERTY (new)"
+msgstr "ìÉÔÏ×ÓØËÁ AZERTY (ÎÏ×Á)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""
-"ìÁÓËÁ×Ï ÐÒÏÓÉÍÏ ÄÏ ÐÏͦÞÎÉËÁ ÕÓÔÁÎÏ×ËÉ ÍÅÒÅÖ¦.\n"
-"\n"
-"úÁÒÁÚ ×ÁÛÁ ÍÅÒÅÖÁ ÔÁ ¦ÎÔÅÒÎÅÔ Ú'¤ÄÎÁÎÎÑ ÂÕÄÕÔØ ÎÁÓÔÒϤΦ. ñËÝÏ ×É ÎÅ\n"
-"ÈÏÞÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓØ Á×ÔÏÍÁÔÉÞÎÉÍ ×ÉÚÎÁÞÅÎÎÑÍ, צÄͦΦÔØ ×ÉÂ¦Ò ÏÐæ§.\n"
-#: ../../network/netconnect.pm:1
-#, c-format
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
msgstr ""
-"þÅÒÅÚ ÔÅ, ÝÏ ×É ÒÏÂÉÔÅ ÕÓÔÁÎÏ×ËÕ ÐÏ ÍÅÒÅÖ¦, ×ÁÛÁ ÍÅÒÅÖÁ ×ÖÅ\n"
-"ÓËÏÎƦ­ÕÒÏ×ÁÎÁ. \n"
-"\n"
-"îÁÔÉÓΦÔØ ÎÁ çÁÒÁÚÄ ÝÏ ÚÂÅÒÅÇÔÉ ÕÓÔÁÎÏ×ËÉ ÍÅÒÅÖ¦, ÁÂÏ ÎÁ ÷¦ÄͦÎÉÔÉ\n"
-"ÄÌÑ ÔÏÇÏ, ÝÏ ÚͦÎÉÔÉ ÕÓÔÁÎÏ×ËÉ Ú'¤ÄÎÁÎÎÑ ¦ÎÔÅÒÎÅÔÁ ¦ ÍÅÒÅÖ¦.\n"
+"÷ ÑËÏÓÔ¦ ЦÄÒÏÚĦÌÁ ÄÌÑ root (/) ×É ×ÉÂÒÁÌÉ ÐÒÏÇÒÁÍÎÉÊ RAID.\n"
+"úÁ×ÁÎÔÁÖÕ×ÁÞ¦ ÎÅ ÍÖÏÕÔØ ÐÒÁÃÀ×ÁÔÉ Ú ÔÁËÉÍÉ Ð¦ÄÒÏÚĦÌÁÍÉ ÂÅÚ Ð¦ÄÒÏÚĦÌÕ\n"
+"/boot. ôÏÖ, ÂÕÄØ-ÌÁÓËÁ, ÎÅ ÚÁÂÕÄØÔÅ ÄÏÄÁÔÉ Ð¦ÄÒÏÚÄ¦Ì /boot."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Previous"
+msgstr "<- ðÏÐÅÒÅÄΦÊ"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (MacOS...)"
+msgstr "¶ÎÛ¦ ÓÉÓÔÅÍÉ (MacOS...)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "To activate the mouse,"
+msgstr "ýÏ ÁËÔÉצÚÕ×ÁÔÉ ÍÉÛËÕ, "
+
+#: ../../install_interactive.pm:1
#, c-format
+msgid "Bringing up the network"
+msgstr "÷ÍÉËÁÀ ÍÅÒÅÖÕ"
+
+#: ../../common.pm:1
+#, fuzzy, c-format
+msgid "Screenshots will be available after install in %s"
+msgstr ""
+"÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÔÁËÏÖ ¦ÎÛ¦ ÍÏ×É, Ñ˦ ÂÕÄÕÔØ ÄÏÓÔÕÐΦ × ÓÉÓÔÅͦ ЦÓÌÑ\n"
+"ÕÓÔÁÎÏ×ËÉ"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
"\n"
-"We are now going to configure the %s connection.\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
"\n"
-"Press OK to continue."
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
msgstr ""
+"îÁ ÷ÁÛÏÍÕ ÄÉÓËÕ ÚÎÁÊÄÅÎÏ Â¦ÌØÛÅ ÏÄÎÏÇÏ Ð¦ÄÒÏÚĦÌÁ, ÝÏ ÎÁÌÅÖÁÔØ\n"
+"ÏÐÅÒÁæÊÎ¦Ê ÓÉÓÔÅͦ ÷¦ÎÄÏ×Ó. ÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÏÄÉÎ Ú ÎÉÈ, ÒÏÚͦÒ\n"
+"ÑËÏÇÏ ÂÉ ×É ÈÏÔ¦ÌÉ ÚͦÎÉÔÉ, ÄÌÑ ÔÏÇÏ ÝÏ ×ÓÔÁÎÏ×ÉÔÉ ÏÐÅÒÁæÊÎÕ ÓÉÓÔÅÍÕ\n"
+"íÁÎÄÒÅÊË ì¦ÎÁËÓ.\n"
"\n"
+"ëÏÖÅΠЦÄÒÏÚÄ¦Ì ÐÏÄÁÎÏ × ÔÁËÏÍÕ ×ÉÇÌÑĦ: \"îÁÚ×Á × ì¦ÎÁËÓ¦\", \"îÁÚ×Á Õ\n"
+"÷¦ÎÄÏ×Ó\", \"òÏÚͦÒ\".\n"
"\n"
+"\"îÁÚ×Á × ì¦ÎÁËÓ¦\" ÚÁËÏÄÏ×ÁÎÁ ÔÁËÉÍ ÞÉÎÏÍ: \"ÔÉÐ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ\",\n"
+"\"ÎÏÍÅÒ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ\", \"ÎÏÍÅÒ Ð¦ÄÒÏÚĦÌÕ ÎÁ ÄÉÓËÕ\", (îÁÐÒÉËÌÁÄ:\n"
+"\"hda1\").\n"
"\n"
-"úÁÒÁÚ ÂÕÄÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ Ú'¤ÄÎÁÎÎÑ %s.\n"
+"ôÉÐ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ\" - ÃÅ \"hd\", ÑËÝÏ ×É ÍÁ¤ÔÅ ÄÉÓË ÔÉÐÕ IDE, ¦ \"sd\",\n"
+"ÑËÝÏ ×É ÍÁ¤ÔÅ ÖÏÒÓÔËÉÊ ÄÉÓË ÔÉÐÕ SCSI.\n"
"\n"
+"\"îÏÍÅÒ ÖÏÒÓËÏÇÏ ÄÉÓËÕ\" - ÃÅ ÚÁ×ÖÄÉ Ì¦ÔÅÒÁ ЦÓÌÑ \"hd\" ÞÉ \"sd\". äÌÑ\n"
+"ÄÉÓË¦× ÔÉÐÕ IDE ÃÅ:\n"
"\n"
-"îÁÔÉÓΦÔØ \"çÁÒÁÚÄ\" ÄÌÑ ÐÒÏÄÏ×ÄÖÅÎÎÑ"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "úÁÒÁÚ ÂÕÄÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ Ú'¤ÄÎÁÎÎÑ %s."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection & configuration"
-msgstr "ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ ¦ ËÏÎƦÇÕÒÁæÑ"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Configure the connection"
-msgstr "îÁÓÔÒϧÔÉ ÍÅÒÅÖÕ"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Disconnect"
-msgstr "÷¦Ä'¤ÄÎÁÔÉÓØ"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Connect"
-msgstr "ú'¤ÄÎÁÔÉÓØ"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
+" * \"a\" - ÇÏÌÏ×ÎÉÊ ÄÉÓË (master) ÎÁ ÐÅÒÛÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
"\n"
-"You can reconfigure your connection."
-msgstr ""
+" * \"b\" - ×ÔÏÒÉÎÎÉÊ (slave) ÄÉÓË ÎÁ ÐÅÒÛÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
+"\n"
+" * \"c\" - ÇÏÌÏ×ÎÉÊ ÄÉÓË ÎÁ ÄÒÕÇÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
+"\n"
+" * \"d\" - ×ÔÏÒÉÎÎÉÊ ÄÉÓË ÎÁ ÄÒÕÇÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE.\n"
+"\n"
+"äÌÑ SCSI ÄÉÓË¦× \"a\" ÏÚÎÁÞÁ¤ \"ÇÏÌÏ×ÎÉÊ ÄÉÓË\", \"b\" - ÄÒÕÇÏÒÑÄÎÉÊ ÄÉÓË, "
+"¦\n"
+"Ô.Ä. ...\n"
"\n"
-"÷É ÍÏÖÅÔÅ ÚͦÎÉÔÉ ÎÁÓÔÒÏÊËÉ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
+"\"îÁÚ×Á Õ ÷¦ÎÄÏ×Ó\" - Ê̦ÔÅÒÁ ÷ÁÛÏÇÏ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ, ÑË ×É §§ ÂÁÞÉÔÅ\n"
+"ÐÒÉ ÒÏÂÏÔ¦ Õ ÷¦ÎÄÏ×Ó (ÐÅÒÛÉÊ ÄÉÓË ÞÉ Ð¦ÄÒÏÚÄ¦Ì ÎÁÚÉ×Á¤ÔØÓÑ \"C:\")."
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+msgid "Tanzania"
msgstr ""
-"\n"
-"÷É ÚÁÒÁÚ Ú'¤ÄÎÁΦ Ú ¦ÎÔÅÒÎÅÔÏÍ."
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "÷É ÚÁÒÁÚ ÎÅ Ú'¤ÄÎÁΦ Ú ¦ÎÔÅÒÎÅÔÏÍ."
+msgid "Computing FAT filesystem bounds"
+msgstr "ïÂÞÉÓÌÀÀ ÍÅÖ¦ ЦÄÒÏÚĦÌÕ FAT"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
-"You can disconnect or reconfigure your connection."
+"Backup Sources: \n"
msgstr ""
-"\n"
-"÷É ÍÏÖÅÔŠצÄ'¤ÄÎÁÔÉÓØ ÁÂÏ ÚͦÎÉÔÉ ËÏÎƦ­ÕÒÁæÀ Ó×Ϥ§ ÍÅÒÅÖ¦."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÓÔÁÎÏ×ÌÅÎÏ."
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "÷ÉÇÌÑÄ URL ÍÁ¤ ÂÕÔÉ http:"
+msgid "Content of the file"
+msgstr "úͦÓÔ ÆÁÊÌÕ"
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "÷ÉÇÌÑÄ ÐÒÏËÓ¦ ÍÁ¤ ÂÕÔÉ http://..."
+msgid "Authentication LDAP"
+msgstr "á×ÔÅÎÔÉËÁÃ¦Ñ LDAP"
-#: ../../network/network.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "FTP proxy"
-msgstr "ðÒÏËÓ¦ FTP"
+msgid "Let me pick any driver"
+msgstr ""
-#: ../../network/network.pm:1
-#, c-format
-msgid "HTTP proxy"
-msgstr "ðÒÏËÓ¦ HTTP"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Profile "
+msgstr "ðÒÏƦÌØ: "
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Proxies configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÐÒÏËÓ¦"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "IP ÁÄÒÅÓÁ ÍÁ¤ ÂÕÔÉ Õ ÆÏÒÍÁÔ¦ 1.2.3.4"
+msgid "transmitted"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "IP ÁÄÒÅÓÁ ÍÁ¤ ÂÕÔÉ Õ ÆÏÒÍÁÔ¦ 1.2.3.4"
+msgid "Palestine"
+msgstr "úÂÅÒÅÇÔÉ ×ÉÂ¦Ò ÐÁËÅÔ¦×"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Gateway device"
-msgstr "ûÌÀÚÏ×ÉÊ ÐÒÉÓÔÒ¦Ê"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../network/network.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Gateway (e.g. %s)"
+msgid "%d comma separated strings"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "DNS server"
-msgstr "óÅÒ×ÅÒ DNS"
+msgid "Here is the full list of keyboards available"
+msgstr "ôÕÔ ÎÁ×ÅÄÅÎÏ ÐÏ×ÎÉÊ ÓÐÉÓÏË ÎÁÑ×ÎÉÈ ËÌÁצÁÔÕÒ"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Theme name"
+msgstr "îÁÚ×Á ÒÅÓÕÒÓÕ"
+
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"÷×ÅĦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁÚ×Õ ÷ÁÛÏÇÏ ÈÏÓÔÁ. îÁÚ×Á ÈÏÓÔÁ ÐÏ×ÉÎÎÁ ÂÕÔÉ\n"
-"ÐÏ×ΦÓÔÀ Ë×Á̦ƦËÏ×ÁÎÏÀ ÎÁÚ×ÏÀ ÈÏÓÔÁ, ÔÁËÏÀ, ÑË, ÎÁÐÒÉËÌÁÄ,\n"
-"``mybox.mylab.myco.com''.\n"
-"÷É ÔÁËÏÖ ÍÏÖÅÔÅ ××ÅÓÔÉ IP ÁÄÒÅÓÕ ÛÌÀÚÁ ÑËÝÏ ÷É ÔÁËÉÊ ÍÁ¤ÔÅ."
+msgid "/_Help"
+msgstr "/ð¦ÄËÁÚËÁ"
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+msgid "the width of the progress bar"
msgstr ""
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ÁÄÒÅÓÁ ÍÁ¤ ÂÕÔÉ Õ ÆÏÒÍÁÔ¦ 1.2.3.4"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Start at boot"
-msgstr "óÔÁÒÔÕ×ÁÔÉ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
+msgid "Cook Islands"
+msgstr "ëÕËÁ ÏÓÔÒÏ×É"
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "÷ÉÐÒÏÂÕÊÔÅ ÍÉÛËÕ, ÂÕÄØ-ÌÁÓËÁ"
+#: ../../fs.pm:1
+#, c-format
+msgid "Formatting partition %s"
+msgstr "æÏÒÍÁÔÕ×ÁÎÎÑ Ð¦ÄÒÏÚĦÌÕ %s"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
+msgid "Hostname required"
+msgstr "¶Í'Ñ ÈÏÓÔÁ:"
-#: ../../network/network.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Track network card id (useful for laptops)"
+msgid "Unselect fonts installed"
msgstr ""
-"úÁÐÉÓÁÔÉ id ÐÌÁÔÉ ÍÅÒÅÖ¦ (ÍÏÖÅ ÚÎÁÄÏÂÉÔØÓÑ ÐÒÉ ËÏÒÉÓÔÕ×ÁÎΦ ÍϦÌØÎÉÍ "
-"ËÏÍÐ'ÀÔÅÒÏÍ)"
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "îÁÚ×Á ÈÏÓÔÁ"
-
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Netmask"
-msgstr "íÁÓËÁ ÍÅÒÅÖ¦"
+msgid "Cancel"
+msgstr "÷¦ÄͦÎÉÔÉ"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Searching for configured scanners ..."
+msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
+
+#: ../../mouse.pm:1
#, c-format
-msgid "IP address"
-msgstr "IP-ÁÄÒÅÓÁ"
+msgid "Wheel"
+msgstr "ëÏ̦ÝÁÔËÏ"
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp)"
+msgid "Videocard"
+msgstr "÷¦ÄÅÏ ÒÅÖÉÍ"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Automatic IP"
-msgstr "á×ÔÏÍÁÔÉÞÎÁ ËÏÎƦÇÕÒÁÃ¦Ñ IP"
+msgid "\tBackups use tar and bzip2\n"
+msgstr ""
-#: ../../network/network.pm:1
-#, c-format
-msgid " (driver %s)"
-msgstr " (%s ÄÒÁÊ×ÅÒ)"
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove Selected"
+msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
-#: ../../network/network.pm:1
-#, c-format
-msgid "Configuring network device %s"
-msgstr "ëÏÎƦÇÕÒÕÀ ÐÒÉÓÔÒ¦Ê ÍÅÒÅÖ¦ %s"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _modems"
+msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"÷×ÅĦÔØ, ÂÕÄØ-ÌÁÓËÁ, ËÏÎƦÇÕÒÁæÀ IP ÄÌÑ Ã¦¤§ ÍÁÛÉÎÉ. ëÏÖÅÎ ÐÕÎËÔ\n"
-"ÔÒÅÂÁ ××ÏÄÉÔÉ ÑË IP ÁÄÒÅÓÕ × ÔÏÞËÏ×Ï-ÄÅÓÑÔËÏ×¦Ê ÎÏÔÁæ§ (ÑË,\n"
-"ÎÁÐÒÉËÌÁÄ, 1.2.3.4)"
+msgid "Remove printer"
+msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
-#: ../../network/network.pm:1
-#, c-format
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
msgstr ""
-"õ÷áçá: ãÅÊ ÐÒÉÓÔÒ¦Ê ÂÕÌÏ ÐÏÐÅÒÅÄÎØÏ ÎÁÓÔÒϤÎÏ ÄÌÑ Ú'¤ÄÎÁÎÎÑ Ú ¶ÎÔÅÒÎÅÔÏÍ.\n"
+"õ÷áçá!\n"
"\n"
-"ðÒÏÓÔÏ ÎÁÔÉÓΦÔØ \"çÁÒÁÚÄ\" ÝÏ ÚÂÅÒÅÇÔÉ ËÏÎƦ­ÕÒÁæÀ ÐÒÉÓÔÒÏÀ.\n"
-"úͦÎÁ ÐÏÌ¦× ÎÉÖÞÅ ÐÒÉ×ÅÄÅ ÄÏ ÚͦÎÉ ËÏÎƦ­ÕÒÁæ§ ÐÒÉÓÔÒÏÀ."
+"úÁÒÁÚ DrakX ÐÏÔÒ¦ÂÎÏ ÚͦÎÉÔÉ ÒÏÚÍ¦Ò Ð¦ÄÒÏÚĦÌÕ ¦Ú Windows. ïÂÅÒÅÖÎÏ:\n"
+"ÃÑ ÏÐÅÒÁÃ¦Ñ ÎÅÂÅÚÐÅÞÎÁ. ñËÝÏ ×É ÝÅ ÃØÏÇÏ ÎÅ ÚÒÏÂÉÌÉ, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ\n"
+"ÚÁÒÁÚ ÐÒÉÐÉÎÉÔÕ ÕÓÔÁÎÏ×ËÕ, ÓËÏÒÉÓÔÁÔÉÓÑ ÐÒÏÇÒÁÍÏÀ scandisk Ú Windows\n"
+"(Á ËÒ¦Í ÔÏÇÏ, ÍÏÖÌÉ×Ï, ÔÁËÏÖ ÄÅÆÒÁÇÍÅÎÔÕ×ÁÔÉ Ð¦ÄÒÏÚÄ¦Ì ÚÁ ÄÏÐÏÍÏÇÏÀ\n"
+"defrag) ÎÁ ÃØÏÍÕ Ð¦ÄÒÏÚĦ̦ ÔÁ ÚÒÏÂÉÔÉ ÒÅÚÅÒ×ÎÕ ËÏЦÀ ÷ÁÛÉÈ ÄÁÎÉÈ.\n"
+"ëÏÌÉ ×ÓÅ ÃÅ ÚÒÏÂÌÅÎÏ - ÎÁÔÉÓΦÔØ çÁÒÁÚÄ."
-#: ../../network/shorewall.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr ""
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
msgstr ""
-"õ×ÁÇÁ! úÎÁÊÄÅÎÁ ¦ÓÎÕÀÞÁ ËÏÎƦ­ÕÒÁÃ¦Ñ firewall. íÏÖÌÉ×Ï ÷ÁÍ ÐÏÔÒ¦ÂÎÏ\n"
-"ÂÕÄÅ ×ÉËÏÎÁÔÉ ÄÅÑ˦ ÚͦÎÉ Ð¦ÓÌÑ ÕÓÔÁÎÏ×ËÉ."
+"ìÁÓËÁ×Ï ÐÒÏÓÉÍÏ ÄÏ ËÏÎƦ­ÕÒÁæÊÎϧ ÐÒÏÇÒÁÍÉ ÄÌÑ ÐÒÏËÓ¦.\n"
+"\n"
+"ôÕÔ ÷É ÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÐÒÏËÓ¦ ÄÌÑ ÐÒÏÔÏËÏÌ¦× ftp ÔÁ http Ú ÐÁÒÏÌÅÍ\n"
+"ÞÉ ÂÅÚ. \n"
-#: ../../network/shorewall.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "úÎÁÊÄÅÎÏ ËÏÎƦ­ÕÒÁæÀ firewall!"
+msgid "Other"
+msgstr "¶ÎÛ¦"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "Account Password"
-msgstr "ðÁÒÏÌØ Õ ÐÒÏ×ÁÊÄÅÒÁ"
+msgid "Default"
+msgstr "ïÓÎÏ×ÎÁ"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "òÁÈÕÎÏË ËÏÒÉÓÔÕ×ÁÞÁ (¦Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ)"
+msgid "Button 2 Emulation"
+msgstr "åÍÕÌÑÃ¦Ñ 2 ËÌÁצÛ"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "úÁÔÒÉÍËÁ ÐÅÒÅÄ ÚÁËÒÉÔÔÑÓ Ú×'ÑÚËÕ (ÓÅË)"
+msgid "type1inst building"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Connection speed"
-msgstr "û×ÉÄ˦ÓÔØ Ú×'ÑÚËÕ"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Abiword"
+msgstr "÷¦ÄͦÎÉÔÉ"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image file"
+msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Dialing mode"
-msgstr "òÅÖÉÍ Ú×'ÑÚËÕ ÞÅÒÅÚ ÍÏÄÅÍ"
+msgid "X server"
+msgstr "X ÓÅÒ×ÅÒ"
-#: ../../network/tools.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Domain Admin User Name"
+msgstr "îÁÚ×Á ÄÏÍÅÎÕ"
+
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "There was an error while scanning for TV channels"
+msgstr "óÔÁÌÁÓÑ ÐÏÍÉÌËÁ Ð¦Ä ÞÁÓ ÕÓÔÁÎÏ×ËÉ ÐÁËÅÔ¦×: "
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose your country"
-msgstr "÷ÉÂÅÒ¦ÔØ ËÒÁ§ÎÕ"
+msgid "US keyboard (international)"
+msgstr "ëÌÁצÁÔÕÒÁ óûá (ͦÖÎÁÒÏÄÎÁ)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Not installed"
+msgstr "÷ÉÊÔÉ Ú ÕÓÔÁÎÏ×ËÉ"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "2Ê DNS ÐÒÏ×ÁÊÄÅÒÁ (ÎÅÏÂÏ×'ÑÚËÏ×Ï)"
+msgid "LAN connection"
+msgstr "ú'¤ÄÎÁÎÎÑ ÞÅÒÅÚ ÌÏËÁÌØÎÕ ÍÅÒÅÖÕ"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "1Ê DNS ÐÒÏ×ÁÊÄÅÒÁ (ÎÅÏÂÏ×'ÑÚËÏ×Ï)"
+msgid "/File/-"
+msgstr "/æÁÊÌ/-"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Provider phone number"
-msgstr "îÏÍÅÒ ÔÅÌÅÆÏÎÕ ÐÒÏ×ÁÊÄÅÒÁ"
+msgid "Italian"
+msgstr "¶ÔÁ̦ÊÓØËÁ"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "îÁÚ×Á ÐÒÏ×ÁÊÄÅÒÁ (ÔÏÂÔÏ provider.net)"
+msgid "Basic"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Your personal phone number"
-msgstr "÷ÁÛ ÏÓÏÂÉÓÔÉÊ ÎÏÍÅÒ ÔÅÌÅÆÏÎÕ"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Card IO_1"
-msgstr "÷/÷_1 ËÁÒÔËÉ"
+msgid "Honduras"
+msgstr "çÏÎÄÕÒÁÓ"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Card IO_0"
-msgstr "÷/÷_0 ËÁÒÔËÉ"
+msgid "pdq"
+msgstr ""
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO"
msgstr "÷/÷ ËÁÒÔËÉ"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "ðÁÍ'ÑÔØ ËÁÒÔËÉ (DMA)"
+msgid "when checked, owner and group won't be changed"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Card IRQ"
-msgstr "ðÅÒÅÐÉÎ ËÁÒÔËÉ"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"ãÅ ÓÐÅæÁÌØÎÉÊ Ð¦ÄÒÏÚÄ¦Ì ÄÌÑ \n"
+"ÍÏÖÌÉ×ÏÓÔ¦ ÐÏÄצÊÎÏÇÏ \n"
+"ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ.\n"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "âÕÄØ-ÌÁÓËÁ ÚÁÐÏ×ΦÔØ ÁÂÏ ×ÉÂÅÒ¦ÔØ ÐÏÌÅ ×ÎÉÚÕ"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
+"äÌÑ ËÏÖÎÏÇÏ ËÒÏËÕ, ÂÕÄØ ÌÁÓËÁ, ×ËÁÖ¦ÔØ ÞÉ ÐÒÉ ÐÏ×ÔÏÒÎ¦Ê ÕÓÔÁÎÏ×æ ÃÅÊ\n"
+"ËÒÏË ×ÉËÏÎÁ¤ÔØÓÑ Á×ÔÏÍÁÔÉÞÎÏ, ÞÉ ×ÒÕÞÎÕ."
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Connection Configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ Ú'¤ÄÎÁÎÎÑ"
-
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
msgstr ""
-"óÉÓÔÅÍÁ ÚÄÁ¤ÔØÓÑ ÎŠЦÄËÌÀÞÅÎÁ ÄÏ ¦ÎÔÅÒÎÅÔÕ.\n"
-"óÐÒÏÂÕÊÔÅ ÚͦÎÉÔÉ ËÏÎƦÇÕÒÁæÀ Ó×ÏÇÏ Ú'¤ÄÎÁÎÎÑ."
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Network by FTP.\n"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Russian (Yawerty)"
+msgstr "òÏÓ¦ÊÓØËÁ (ñ÷åòôé)"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "ú ÔÏÞËÉ ÚÏÒÕ ÂÅÚÐÅËÉ, ×É ÂÕÄÅÔÅ ÚÁÒÁÚ ×¦Ä'¤ÄÎÁΦ."
+msgid "You must enter a device or file name!"
+msgstr "÷×ÅĦÔØ URI ÐÒÉÓÔÒÏÀ ÐÒÉÎÔÅÒÁ"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "The system is now connected to the Internet."
-msgstr "óÉÓÔÅÍÁ Ú'¤ÄÎÁÎÁ Ú ¦ÎÔÅÒÎÅÔÏÍ."
+msgid "/_Quit"
+msgstr "÷ÉȦÄ"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "÷ÉÐÒÏÂÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑ..."
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
-#: ../../network/tools.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "þÉ ÷É ÈÏÞÅÔÅ ÓÐÒÏÂÕ×ÁÔÉ Ð¦ÄËÌÀÞÉÔÉÓÑ ÄÏ ¦ÎÔÅÒÎÅÔÕ ÚÁÒÁÚ?"
+msgid "Graphics memory: %s kB\n"
+msgstr "÷¦ÄÅÏ ÐÁÍ'ѦÔØ: %sËÂ\n"
-#: ../../network/tools.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Internet configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ¦ÎÔÅÒÎÅÔÕ"
-
-#: ../../partition_table/raw.pm:1
-#, fuzzy, c-format
msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
-"ýÏÓØ ÎÅÄÏÂÒŠצÄÂÕ×Á¤ÔØÓÑ ÎÁ ×ÁÛÏÍÕ ÄÉÓËÕ.\n"
-"ôÅÓÔÕ×ÁÎÎÑ Ã¦Ì¦ÓÎÏÓÔ¦ ÄÁÎÉÈ ÂÕÌÏ ÎÅ×ÄÁÌÉÍ.\n"
-"ãÅ ÏÚÎÁÞÁ¤, ÝÏ ÚÁÐÉÓ ÂÕÄØ-ÞÏÇÏ ÎÁ ÄÉÓË ÍÁÔÉÍÅ ÓÕÍÎÉÊ ÒÅÚÕÌØÔÁÔ."
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid " (Default)"
-msgstr " (ïÓÎÏ×ÎÁ)"
-
-#: ../../printer/cups.pm:1
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP ÁÄÒÅÓÁ CUPS ÓÅÒ×ÅÒÁ"
+msgid "access to compilation tools"
+msgstr ""
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Remote Printers"
-msgstr "÷¦ÄÄÁÌÅÎÉÊ ÐÒÉÎÔÅÒ"
+msgid "Please select data to restore..."
+msgstr "÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÍÏ×Õ."
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"ñËÝÏ ×É ÚÂÉÒÁ¤ÔÅÓØ ËÏÒÉÓÔÕ×ÁÔÉÓÑ aboot, ÎÅ ÚÁÂÕÄØÔÅ ÚÁÌÉÛÉÔÉ ×¦ÌØÎÉÊ\n"
+"ÒÏÚÄ¦Ì (ÄÏÓÔÁÔÎØÏ 2048 ÓÅËÔÏÒ¦×) ÎÁ ÐÏÞÁÔËÕ ÄÉÓËÕ"
-#: ../../printer/cups.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "(on this machine)"
-msgstr "(ÎÁ Ã¦Ê ÍÁÛÉΦ)"
+msgid "Standard test page"
+msgstr "óÔÁÎÄÁÒÔÎÁ ÔÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ"
-#: ../../printer/cups.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(on %s)"
-msgstr "(ÎÁ %s)"
+msgid "Create"
+msgstr "óÔ×ÏÒÉÔÉ"
-#: ../../printer/data.pm:1
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System (óЦÌØÎÁ ÓÉÓÔÅÍÁ ÄÒÕËÕ ÄÌÑ àΦËÓ)"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "What"
+msgstr "þÅËÁÊÔÅ"
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "There was an error ordering packages:"
+msgstr "óÔÁÌÁÓÑ ÐÏÍÉÌËÁ Ð¦Ä ÞÁÓ ÓÏÒÔÕ×ÁÎÎÑ ÐÁËÅÔ¦×: "
-#: ../../printer/data.pm:1
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation (ÎÏ×Å ÐÏËÏ̦ÎÎÑ)"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Bulgarian (BDS)"
+msgstr "âÏÌÇÁÒÓØËÁ"
-#: ../../printer/data.pm:1
-#, c-format
-msgid "LPD"
-msgstr "LPD"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Disable Server"
+msgstr "âÁÚÁ ÄÁÎÉÈ"
-#: ../../printer/data.pm:1
-#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Filesystem encryption key"
+msgstr "ôÉРЦÄÒÏÚĦÌÕ: "
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Gujarati"
+msgstr ""
-#: ../../printer/data.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Unknown Model"
-msgstr "îÅצÄÏÍÁ ÍÏÄÅÌØ"
+msgid "Save theme"
+msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "group"
+msgstr "òÏÂÏÞÁ ÇÒÕÐÁ"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Unknown model"
-msgstr "îÅצÄÏÍÁ ÍÏÄÅÌØ"
+msgid "Brazil"
+msgstr "âÒÁÚÉ̦Ñ"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "%s (Port %s)"
-msgstr "ðÏÒÔ"
+msgid "Auto Install"
+msgstr "õÓÔÁÎÏ×ËÁ"
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Host %s"
-msgstr "îÁÚ×Á ÈÏÓÔÁ"
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#, c-format
+msgid "Network Configuration Wizard"
+msgstr "ðÏͦÞÎÉË ËÏÎƦÇÕÒÁæ§ ÍÅÒÅÖ¦"
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Network %s"
-msgstr "íÅÒÅÖÁ:"
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Removable media automounting"
+msgstr "á×ÔÏÍÁÔÉÞÎÅ ÍÏÎÔÕ×ÁÎÎÑ ÚͦÎÎÉÈ ÎÏÓ¦§×"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Interface \"%s\""
-msgstr "¶ÎÔÅÒÆÅÊÓ %s"
+msgid "Printing"
+msgstr "äÒÕË"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, fuzzy, c-format
-msgid "Local network(s)"
-msgstr "ÎÅ ÚÎÁÊÄÅÎÁ ÐÌÁÔÁ ÍÅÒÅÖ¦"
+msgid "Unkown driver"
+msgstr "îÅצÄÏÍÁ ÍÏÄÅÌØ"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Raw printer (No driver)"
+msgid ""
+"There are no printers found which are directly connected to your machine"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", using command %s"
-msgstr ""
+msgid "Create a new partition"
+msgstr "óÔ×ÏÒÉÔÉ ÎÏ×ÉÊ ÒÏÚĦÌ"
-#: ../../printer/main.pm:1
-#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr ""
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Driver:"
+msgstr "äÒÁÊ×ÅÒ"
-#: ../../printer/main.pm:1
-#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "unknown"
+msgstr "îÅצÄÏÍÁ ÍÏÄÅÌØ"
-#: ../../printer/main.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
+msgid "Use fdisk"
+msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ fdisk"
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "ðÏÍÉÌËÁ ÐÒÉ ÚÁÐÉÓ¦ Õ ÆÁÊÌ %s"
+msgid "MOVE YOUR WHEEL!"
+msgstr "ðïóõîøôå ëïì¶ýáôëï!"
-#: ../../printer/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ", multi-function device"
+msgid "sent: "
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
+msgid "Automatic IP"
+msgstr "á×ÔÏÍÁÔÉÞÎÁ ËÏÎƦÇÕÒÁÃ¦Ñ IP"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ", multi-function device on USB"
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ""
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ", USB printer"
-msgstr "îÅÍÁ¤ ÐÒÉÎÔÅÒÁ"
+msgid "Configuration of a remote printer"
+msgstr "îÁÓÔÒϧÔÉ ÐÒÉÎÔÅÒ"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", USB printer \\#%s"
-msgstr ""
+msgid "Moldova"
+msgstr "íÏÌÄÁצÑ"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
+
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid " on parallel port \\#%s"
+msgid "An online platform to respond to enterprise support needs."
msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Local Printers"
-msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "÷ÉÇÌÑÄ URL ÍÁ¤ ÂÕÔÉ http:"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Add a new rule at the end"
+msgstr "äÏÄÁÔÉ ÐÒÉÎÔÅÒ"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "ðÅÒÅÎÁÐÒÁ×ÉÔÉ ÒÏÂÏÔÕ ÐÏ ËÁÎÁÌÕ × ËÏÍÁÎÄÕ"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
+msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "÷×ÅĦÔØ URI ÐÒÉÓÔÒÏÀ ÐÒÉÎÔÅÒÁ"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"×É ÍÏÖÅÔÅ ÔÅÐÅÒ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÊÏÇÏ ÏÐæ§ × ÍÏÄÕ̦ %s.\n"
+"ïÐæ§ ÍÁÀÔØ ÆÏÒÍÁÔ ``ÎÁÚ×Á=×ÅÌÉÞÉÎÁ ÎÁÚ×Á2=×ÅÌÉÞÉÎÁ2 ...''.\n"
+"îÁÐÒÉËÌÁÄ, ``io=0x300 irq=7''"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "ðÒÉÎÔÅÒ ÎÁ NetWare ÓÅÒ×ÅÒ¦"
+msgid "Quit without writing the partition table?"
+msgstr "÷ÉÊÔÉ ÂÅÚ ÚÁÐÉÓÕ ÔÁÂÌÉæ ЦÄÒÏÚĦ̦×?"
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "ðÒÉÎÔÅÒ ÎÁ ÓÅÒ×ÅÒ¦ SMB/Windows 95/98/NT "
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/main.pm:1
+#: ../../standalone.pm:1
#, fuzzy, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "ðÒÉÎÔÅÒ × ÍÅÒÅÖ¦ (ÓÏËÅÔ)"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer on remote lpd server"
-msgstr "ðÒÉÎÔÅÒ ÎÁ צÄÄÁÌÅÎÏÍÕ ÓÅÒ×ÅÒ¦ lpd"
+msgid "Installing packages..."
+msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÕ %s"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "ðÒÉÎÔÅÒ ÎÁ צÄÄÁÌÅÎÏÍÕ ÓÅÒ×ÅÒ¦ CUPS"
+msgid "Dutch"
+msgstr "äÁÔÓØËÁ"
-#: ../../printer/main.pm:1
-#, c-format
-msgid "Remote printer"
-msgstr "÷¦ÄÄÁÌÅÎÉÊ ÐÒÉÎÔÅÒ"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "The following packages need to be installed:\n"
+msgstr "㦠ÐÁËÅÔÉ ÂÕÄÕÔØ ×ÓÔÁÎÏ×ÌÅÎÉÍÉ"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Local printer"
-msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
+msgid "Angola"
+msgstr "áÎÇÏÌÁ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Configuring applications..."
-msgstr "îÁÓÔÒÏÀÀ ÐÒÉÎÔÅÒ \"%s\"..."
+msgid "service setting"
+msgstr "æËÁ×Ï"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "Printerdrake"
-msgstr "äÒÕËÁÒËÁ"
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Custom"
+msgstr "óÐÅæÁÌØÎÉÊ"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "óÔÉÒÁÀ ÐÒÉÎÔÅÒ \"%s\" ..."
+msgid "File is already used by another loopback, choose another one"
+msgstr ""
+"¶ÎÛÉÊ ÐÒÉÓÔÒ¦Ê Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ ×ÖÅ ËÏÒÉÓÔÕ¤ÔØÓÑ ÃÉÍ\n"
+"ÆÁÊÌÏÍ. ÷ÉÂÅÒ¦ÔØ ¦ÎÛÉÊ."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "þÉ ÷É ÈÏÞÅÔÅ ×ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ \"%s\"?"
+msgid "Read-only"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove printer"
-msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
+msgid "Latvia"
+msgstr "ìÁÔצÑ"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Learn how to use this printer"
-msgstr "þÉ ×É ÈÏÞÅÔÅ ×ÉÐÒÏÂÕ×ÁÔÉ ÎÏ×Õ ËÏÎƦ­ÕÒÁæÀ?"
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "No known driver"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "äÒÕË ÔÅÓÔÏ×ÉÈ ÓÔÏÒ¦ÎÏË"
+msgid "1 MB"
+msgstr "1 íÂ"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Configure Local Area Network..."
+msgstr "îÁÓÔÒϧÔÉ ÌÏËÁÌØÎÕ ÍÅÒÅÖÕ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Launch the sound system on your machine"
+msgstr "úÁÐÕÓË Ú×ÕËÏ×ϧ ÓÉÓÔÅÍÉ ÎÁ ×ÁÛ¦Ê ÍÁÛÉΦ"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+msgid "Preparing printer database..."
+msgstr "çÏÔÕÀÔØÓÑ ÄÁΦ ÐÒÉÎÔÅÒ¦× ..."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Information"
+msgstr "ðÏËÁÚ ¦ÎÆÏÒÍÁæ§"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "No network card"
+msgstr "ÎÅ ÚÎÁÊÄÅÎÁ ÐÌÁÔÁ ÍÅÒÅÖ¦"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Which filesystem do you want?"
+msgstr "ñËÕ ÆÁÊÌÏ×Õ ÓÉÓÔÅÍÕ ×É ×ÉÂÉÒÁ¤ÔÅ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "ðÒÉÎÔÅÒ \"%s\" ×ÓÔÁÎÏ×ÌÅÎÏ ÏÓÎÏ×ÎÉÍ"
+msgid "3 buttons"
+msgstr "ôÒØÏÈ ËÎÏÐÏÞÎÁ"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Default printer"
-msgstr "óÔÁÎÄÁÒÔÎÉÊ ÐÒÉÎÔÅÒ"
+msgid "Detailed information"
+msgstr "äÅÔÁÌØÎÁ ¦ÎÆÏÒÍÁæÑ"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÑË ÏÓÎÏ×ÎÉÊ ÐÒÉÎÔÅÒ"
+msgid "Malta"
+msgstr "íÁÌØÔÁ"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer options"
-msgstr "ïÐæ§ ÐÒÉÎÔÅÒÁ"
+#, fuzzy, c-format
+msgid ""
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
+msgstr ""
+"óÔÁÎÄÁÒÔΦ ÕÓÔÁÎÏ×ËÉ ÐÒÉÎÔÅÒÁ \n"
+"ðÅÒÅÓצÄÞ¦ÔØÓÑ, ÝÏ ÒÏÚÍ¦Ò ÓÔÏÒ¦ÎËÉ ÔÁ ÔÉÐ ÞÏÒÎÉÌ (ÑËÝÏ ÔÁËÁ ÕÓÔÁÎÏ×ËÁ\n"
+"ÐÒÉÓÕÔÎÑ) ×ÓÔÁÎÏ×ÌÅΦ צÒÎÏ. úÁÕ×ÁÖÔÅ, ÝÏ Ú Û×ÉÄ˦ÓÔØ ÄÒÕËÕ Ú\n"
+"ÎÁÄÚ×ÉÞÁÊÎÏ ×ÉÓÏËÏÀ Ñ˦ÓÔÀ ÍÏÖÅ ÂÕÔÉ ÚÎÁÞÎÏ ÐÏצÌØΦÛÁ."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "÷ÉÒÏÂÎÉË ÐÒÉÎÔÅÒÁ, ÍÏÄÅÌØ"
+msgid "This floppy is not FAT formatted"
+msgstr "ãÑ ÄÉÓËÅÔÁ ΊצÄÆÏÒÍÁÔÏ×ÁÎÁ ÑË FAT"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "÷ÉÒÏÂÎÉË ÐÒÉÎÔÅÒÁ, ÍÏÄÅÌØ, ÄÒÁÊ×ÅÒ"
+msgid "Configuring network"
+msgstr "ëÏÎƦÇÕÒÕÀ ÍÅÒÅÖÕ"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, fuzzy, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "óÔÉÒÁÀ ÄÁΦ ÓÔÁÒÏÇÏ ÐÒÉÎÔÅÒÁ \"%s\" ..."
+msgid "Graphic Card"
+msgstr "÷¦ÄÅÏ ÐÌÁÔÁ"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "îÁÚ×Á, ÏÐÉÓ, ÒÏÚÔÁÛÕ×ÁÎÎÑ ÐÒÉÎÔÅÒÁ"
+msgid "Resizing Windows partition"
+msgstr "ïÂÞÉÓÌÀÀ ÍÅÖ¦ ЦÄÒÏÚĦÌÕ Windows"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Printer connection type"
-msgstr "ôÉÐ Ú'¤ÄÎÁÎÎÑ ÐÒÉÎÔÅÒÁ"
+msgid "Provider dns 1 (optional)"
+msgstr "1Ê DNS ÐÒÏ×ÁÊÄÅÒÁ (ÎÅÏÂÏ×'ÑÚËÏ×Ï)"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Raw printer"
-msgstr "îÅÍÁ¤ ÐÒÉÎÔÅÒÁ"
+#: ../../lang.pm:1
+#, c-format
+msgid "Cameroon"
+msgstr "ëÁÍÅÒÕÎ"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do it!"
-msgstr "÷ÉËÏÎÁÔÉ!"
+msgid ""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
+msgstr ""
+"ôÅÐÅÒ ×É ÍÏÖÅÔÅ ÒÏÚÂÉÔÉ ÎÁ ЦÄÒÏÚĦÌÉ ÷ÁÛ ÄÉÓË %s.\n"
+"ð¦ÓÌÑ ÔÏÇÏ, ÑË ×É ÚÁ˦ÎÞÉÔÅ ÎÅ ÚÁÂÕÄØÔÅ ×ÉËÏÎÁÔÉ ËÏÍÁÎÄÕ `w'"
#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
@@ -10393,441 +10212,340 @@ msgstr "÷ÉËÏÎÁÔÉ!"
msgid "Close"
msgstr "úÁËÒÉÔÉ"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../help.pm:1
+#, c-format
msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"ðÒÉÎÔÅÒ %s: %s %s\n"
-"ýÏ ÐÏÔÒ¦ÂÎÏ ÚͦÎÉÔÉ ÄÌÑ ÃØÏÇÏ ÐÒÉÎÔÅÒÁ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Modify printer configuration"
-msgstr "úͦÎÉÔÉ ËÏÎƦÇÕÒÁæÀ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add a new printer"
-msgstr "äÏÄÁÔÉ ÐÒÉÎÔÅÒ"
+msgid "Calendar"
+msgstr "ëÁÌÅÎÄÁÒ"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Normal Mode"
-msgstr "ú×ÉÞÁÊÎÉÊ ÒÅÖÉÍ"
+msgid ""
+"Restore Selected\n"
+"Catalog Entry"
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Change the printing system"
-msgstr "îÁÓÔÒϧÔÉ ÍÅÒÅÖÕ"
+msgid ""
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
+msgstr ""
+"ýÏ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ×¦ÄÄÁÌÅÎÉÊ lpd ÐÒÉÎÔÅÒ, ÷É ÍÁ¤ÔÅ ×ËÁÚÁÔÉ ÎÁÚ×Õ\n"
+"ÈÏÓÔÁ ÐÒÉÎÔ-ÓÅÒ×ÅÒÁ ÔÁ ÎÁÚ×Õ ÐÒÉÎÔÅÒÁ ÎÁ ÃØÏÍÕ ÈÏÓÔ¦."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "CUPS configuration"
-msgstr "ëÏÎƦ­ÕÒÁæÑ"
+#: ../../lang.pm:1
+#, c-format
+msgid "Iceland"
+msgstr "¶ÓÌÁÎĦÑ"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgid "consolehelper missing"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr ""
+msgid "stopped"
+msgstr "ÚÕÐÉÎÅÎÏ"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Whether the FPU has an irq vector"
msgstr ""
-"ôÁ˦ ÐÒÉÎÔÅÒÉ ×ÖÅ ÓËÏÎƦ­ÕÒÏ×ÁΦ.\n"
-"÷É ÍÏÖÅÔÅ ÁÂÏ ÄÏÄÁÔÉ ÝÅ ÄÅÑ˦, ÁÂÏ ÚͦÎÉÔÉ Ô¦, ÝÏ ×ÖÅ ¦ÓÎÕÀÔØ."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "óÉÓÔÅÍÁ ÄÒÕËÕ: "
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "ðÅÒÅצÒËÁ ×ÓÔÁÎÏ×ÌÅÎÏÇÏ ÐÒÏÇÒÁÍÎÏÇÏ ÚÁÂÅÚÐÅÞÅÎÎÑ..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing Foomatic..."
-msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÕ %s"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "îÁÓÔÒÏÀÀ ÐÒÉÎÔÅÒ \"%s\"..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "îÁÓÔÒÏÀÀ ÐÒÉÎÔÅÒ \"%s\"..."
+msgid "Expand Tree"
+msgstr "òÏÚÛÉÒÉÔÉ ÄÅÒÅ×Ï"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "þÉÔÁÀ ÄÁΦ ÐÒÉÎÔÅÒ¦× ..."
+msgid ""
+"The old \"%s\" driver is blacklisted.\n"
+"\n"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "ñËÕ ÞÅÒÇÕ ÄÒÕËÕ (ÓÉÓÔÅÍÕ) ÷É ÈÏÞÅÔÅ ×ÖÉ×ÁÔÉ?"
+msgid "Expert Mode"
+msgstr "åËÓÐÅÒÔÎÉÊ ÒÅÖÉÍ"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "÷ÉÂÅÒ¦ÔØ ÞÅÒÇÕ ÄÒÕËÕ ÄÌÑ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "óÔÁÎÄÁÒÔÎÉÊ ÐÒÉÎÔÅÒ"
+msgid "Printer options"
+msgstr "ïÐæ§ ÐÒÉÎÔÅÒÁ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Installing %s ..."
-msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÕ %s"
+msgid "Local Network adress"
+msgstr "ÎÅ ÚÎÁÊÄÅÎÁ ÐÌÁÔÁ ÍÅÒÅÖ¦"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Removing %s ..."
-msgstr "÷ÉÄÁÌÅÎÎÑ LPD..."
+msgid "Backup your System files. (/etc directory)"
+msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+"Do you want to install the updates ?"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Starting the printing system at boot time"
-msgstr "ñËÕ ÓÉÓÔÅÍÕ ÄÒÕËÕ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ?"
+msgid "Samba Server"
+msgstr "óÅÒ×ÅÒ NIS"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Do you really want to configure printing on this machine?"
+"Enable/Disable IP spoofing protection."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Installing a printing system in the %s security level"
+msgid "Australian Optus cable TV"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "paranoid"
-msgstr "ðÁÒÁÎϦÄÁÌØÎÉÊ"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "high"
-msgstr "÷ÉÓÏËÉÊ"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting printing system..."
-msgstr "ñËÕ ÓÉÓÔÅÍÕ ÄÒÕËÕ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuration of a remote printer"
-msgstr "îÁÓÔÒϧÔÉ ÐÒÉÎÔÅÒ"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
+" <Tab>/<Alt-Tab> Í¦Ö ÅÌÅÍÅÎÔÁÍÉ | <Space> ×ÉÂ¦Ò | <F12> ÎÁÓÔÕÐÎÉÊ ÅËÒÁÎ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+msgid "Subnet:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configure the network now"
-msgstr "îÁÓÔÒϧÔÉ ÍÅÒÅÖÕ"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Go on without configuring the network"
-msgstr "ëÏÎƦÇÕÒÕÀ ÍÅÒÅÖÕ"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
+msgid "Zimbabwe"
+msgstr "ú¦ÍÂÁÂ×Å"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Network functionality not configured"
-msgstr "íÏΦÔÏÒ ÎÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÉÊ"
+msgid "Please enter the host name or IP."
+msgstr "÷ÉÐÒÏÂÕÊÔÅ ÍÉÛËÕ, ÂÕÄØ-ÌÁÓËÁ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Starting network..."
-msgstr "ðÏÞÉÎÁÀ Ú'¤ÄÎÁÎÎÑ..."
+msgid "When"
+msgstr "ëÏ̦ÝÁÔËÏ"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "ðÏÎÏ×ÌÀÀ ÄÁΦ ÐÒÉÎÔÅÒ¦× ..."
+msgid "Second DNS Server (optional)"
+msgstr "äÒÕÇÉÊ ÓÅÒ×ÅÒ DNS(ÎÅÏÂÏ×'ÑÚËÏ×Ï)"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "æ¦ÎÌÑÎĦÑ"
+
+#: ../../security/help.pm:1
+#, c-format
msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Arguments: (arg)\n"
+"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-"÷É ÐÅÒÅÎÅÓÌÉ ÷ÁÛ ËÏÌÉÛÎ¦Ê ÏÓÎÏ×ÎÉÊ ÐÒÉÎÔÅÒ (\"%s\"). úÒÏÂÉÔÉ ÔÁË, ÝÏÂ\n"
-"ÃÅÊ ÐÒÉÎÔÅÒ ÚÁÌÉÛÁ×ÓÑ ÏÓÎÏ×ÎÉÍ ¦ × ÎÏ×¦Ê ÓÉÓÔÅͦ ÄÒÕËÕ %s?"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "ðÅÒÅÎ¦Ó ËÏÎƦÇÕÒÁæ§ ÐÒÉÎÔÅÒ¦× "
+msgid "Color depth: %s\n"
+msgstr "çÌÉÂÉÎÁ ËÏÌØÏÒÕ: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Transferring %s..."
-msgstr "ðÅÒÅÎÏÛÕ %s ..."
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "÷ÉÂ¦Ò ÃØÏÇÏ ÐÁËÅÔÕ ÎÅÍÏÖÌÉ×Ï ×¦ÄͦÎÉÔÉ. ÷¦Î ÐÏ×ÉÎÅÎ ÂÕÔÉ ÐÏÎÏ×ÌÅÎÉÊ."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "New printer name"
-msgstr "îÏ×Á ÎÁÚ×Á ÐÒÉÎÔÅÒÁ"
+msgid "Loading from floppy"
+msgstr "÷¦ÄÎÏ×ÌÀÀ Ú ÄÉÓËÅÔÉ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"ðÒÉÎÔÅÒ Ú ÎÁÚ×ÏÀ \"%s\" ×ÖÅ ¦ÓÎÕ¤.\n"
-"÷É Ä¦ÊÓÎÏ ÂÁÖÁ¤ÔÅ ÐÅÒÅÐÉÓÁÔÉ ÊÏÇÏ ËÏÎƦ­ÕÒÁæÀ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"îÁÚ×Á ÐÒÉÎÔÅÒÁ ÍÁ¤ ÓËÌÁÄÁÔÉÓÑ Ô¦ÌØËÉ Ú Ì¦ÔÅÒ, ÃÉÆÒ ÔÁ ÓÉÍ×ÏÌÁ ЦÄËÒÅÓÌÅÎÎÑ."
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Transfer"
-msgstr "ðÅÒÅÎÅÓÔÉ"
+msgid "Slovenia"
+msgstr "óÌÏ×ÅΦÑ"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"Enter a user\n"
+"%s"
msgstr ""
-"ðÒÉÎÔÅÒ Ú ÎÁÚ×ÏÀ \"%s\" ×ÖÅ ¦ÓÎÕ¤ × \"%s\". îÁÔÉÓΦÔØ \"ðÅÒÅÎÅÓÔÉ\" ÝÏÂ\n"
-"ÐÅÒÅÐÉÓÁÔÉ ÊÏÇÏ ×ÉÚÎÁÞÅÎÎÑ. ÷É ÍÏÖÅÔÅ ÔÁËÏÖ ÎÁÄÒÕËÕ×ÁÔÉ ÎÏ×Õ ÎÁÚ×Õ ÞÉ\n"
-"ÐÒÏÐÕÓÔÉÔÉ ÃÅÊ ÐÒÉÎÔÅÒ."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do not transfer printers"
-msgstr "îÅ ÐÅÒÅÎÏÓÉÔÉ ÐÒÉÎÔÅÒÉ"
+"÷×ÅĦÔØ ËÏÒÉÓÔÕ×ÁÞÁ\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
msgstr ""
-"\n"
-"ðÏÚÎÁÞÔÅ ÐÒÉÎÔÅÒÉ ÄÌÑ ÐÅÒÅÎÏÓÕ ¦ ÎÁÔÉÓΦÔØ ÎÁ \"ðÅÒÅÎÅÓÔÉ\"."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"ëÒ¦Í ÔÏÇÏ, ÐÒÉÎÔÅÒÉ ÓËÏÎƦ­ÕÒÏ×ÁΦ ÚÁ ÄÏÐÏÍÏÇÏÀ ÎÁÄÁÎÉÈ ×ÉÒÏÂÎÉËÁÍÉ\n"
-"ÆÁÊÌ¦× PPD ÞÉ ÐÒÉÎÔÅÒÉ, ÝÏ ÍÁÀÔØ Ò¦ÄΦ ÄÒÁÊ×ÅÒÉ CUPS ÎÅ ÍÏÖÕÔØ ÂÕÔÉ\n"
-"ÐÅÒÅÎÅÓÅÎÉÍÉ."
+msgid "ProgressBar color selection"
+msgstr "÷ÉÂ¦Ò ÍÏÄÅ̦ ÐÒÉÎÔÅÒÁ"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../any.pm:1
+#, c-format
msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
msgstr ""
-"äÏÄÁÔËÏ×Ï, ÞÅÒÇÉ ÎÅ ÐÅÒÅÎÏÓÑÔØÓÑ Ã¦¤À ËÏÍÁÎÄÏÀ ¦ ËÏÎƦ­ÕÒÁæÑ\n"
-"\"foomatic-configure\" ÎÅ ÍÏÖÅ ÂÕÔÉ ÐÅÒÅÎÅÓÅÎÁ ÔÁËÏÖ."
+"ôÕÔ ÎÁ×ÅÄÅΦ Ò¦ÚÎÏÍÁΦÔΦ ÐÕÎËÔÉ.\n"
+"×É ÍÏÖÅÔÅ ÁÂÏ ÄÏÄÁÔÉ ÝÅ ÄÅÑ˦, ÁÂÏ ÚͦÎÉÔÉ Ô¦, ÝÏ ×ÖÅ ¦ÓÎÕÀÔØ."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD ÔÁ LPRng ΊЦÄÔÒÉÍÕÀÔØ ÐÒÉÎÔÅÒÉ IPP.\n"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../help.pm:1
+#, c-format
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
+
+#: ../../services.pm:1
+#, c-format
msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-"PDQ ЦÄÔÒÉÍÕ¤ Ô¦ÌØËÉ ÌÏËÁÌØΦ ÐÒÉÎÔÅÒÉ, צÄÄÁÌÅΦ ÐÒÉÎÔÅÒÉ LDP ¦\n"
-"ÐÒÉÎÔÅÒÉ, ÝÏ ÐÒÁÃÀÀÔØ ÞÅÒÅÚ Socket/TCP.\n"
+"÷ÉËÏÎÕ¤ ËÏÍÁÎÄÉ, ÚÁÐÌÁÎÏ×ÁΦ ËÏÍÁÎÄÏÀ at Ð¦Ä ÞÁÓ ×ÉËÏÎÁÎÎÑ ËÏÍÁÎÄÉ at\n"
+"¦ ×ÉËÏÎÕ¤ ÐÁËÅÔΦ ËÏÍÁÎÄÉ, ËÏÌÉ ÓÉÓÔÅÍÎÅ ÎÁ×ÁÎÔÁÖÅÎÎÑ ÄÏÓÔÁÔÎØÏ\n"
+"ÎÉÚØËÅ. "
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Radio support:"
msgstr ""
-"CUPS ΊЦÄÔÒÉÍÕ¤ ÄÒÕË ÎÁ ÐÒÉÎÔÅÒÁÈ ÓÅÒ×ÅÒ¦× Novell ÞÉ ÐÒÉÎÔÅÒ¦×, ÝÏ\n"
-"ÐÅÒÅÄÁÀÔØ ÄÁΦ ÎÁ ÄÒÕË Õ ×ÉÇÌÑĦ ËÏÍÁÎÄ Ú ÄÏצÌØÎÉÍ ÓÉÎÔÁËÓÉÓÏÍ.\n"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"ëÏÎƦ­ÕÒÁæÀ, ÝÏ ÂÕÌÁ ЦÄÇÏÔÏ×ÁÎÁ ÄÌÑ ÞÅÒÇÉ %s ÷É ÍÏÖÅÔÅ ÓËÏЦÀ×ÁÔÉ\n"
-"äÌÑ ÄÁÎϧ ÕÓÔÁÎÏ×ËÉ ÞÅÒÇÉ ÄÒÕËÕ (%s). ÷Ó¦ ÕÓÔÁÎÏ×ÏÞΦ ÄÁΦ (ÎÁÚ×Á\n"
-"ÐÒÉÎÔÅÒÁ, ÏÐÉÓ, ÒÏÚÔÁÛÕ×ÁÎÎÑ, ÔÉÐ Ú'¤ÄÎÁÎÎÑ ¦ ÓÔÁÎÄÁÒÔΦ ÕÓÔÁÎÏ×ËÉ)\n"
-"ÂÕÄÕÔØ ÐÅÒÅÎÅÓÅΦ ÎÁ ÎÏ×Õ ËÏÎƦ­ÕÒÁæÀ. áÌÅ ÒÏÂÏÔÉ Ú ÞÅÒÇÉ ÐÅÒÅÎÅÓÅÎÏ\n"
-"ÎÅ ÂÕÄÅ. îÅ ×Ó¦ ÞÅÒÇÉ ÍÏÖÕÔØ ÂÕÔÉ ÐÅÒÅÎÅÓÅÎÉÍÉ Ú ÔÁËÉÈ ÐÒÉÞÉÎ: \n"
+msgid "Installing SANE packages..."
+msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÕ %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
+msgid "boot disk creation"
+msgstr "ÓÔ×ÏÒÅÎÎÑ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÏÇÏ ÄÉÓËÕ"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "äÒÕËÕÀ ÔÅÓÔÏ×Õ ÓÔÏÒ¦ÎËÕ(ÓÔÏÒ¦ÎËÉ)..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Print option list"
-msgstr "ïÐæ§ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "÷ÉÍÉËÁÀ ÍÅÒÅÖÕ"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "÷ÉÍÉËÁÀ ÍÅÒÅÖÕ"
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "÷ÉÍÉËÁÀ ÍÅÒÅÖÕ"
+#: ../../diskdrake/removable.pm:1
+#, c-format
+msgid "Change type"
+msgstr "úͦÎÉÔÉ ÔÉÐ"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "÷ÉÍÉËÁÀ ÍÅÒÅÖÕ"
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "õÓÔÁÎÏ×ËÁ SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
+msgid "Use CD/DVDROM to backup"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_messages.pm:1
#, c-format
msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
+"÷¦ÔÁÎÎÑ, ÕÓÔÁÎÏ×ËÁ ÚÁ˦ÎÞÅÎÁ. ÷ÉÊͦÔØ Ú ÄÉÓËÏ×ÏÄ¦× ÚÁ×ÁÎÔÁÖÕ×ÁÌØΦ\n"
+"ÎÏÓ¦§ ¦ ÐÏÔ¦Í ÎÁÔÉÓΦÔØ Return ÄÌÑ ÐÅÒÅ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ.\n"
+"\n"
+"\n"
+"äÌÑ ¦ÎÆÏÒÍÁæ§ ÐÒÏ ×ÉÐÒÁ×ÌÅΦ ÐÏÍÉÌËÉ ÚÎÁÊÄÅΦ × ÃÍÊ ×ÅÒÓ¦§\n"
+"Mandrake Linux Ú×ÅÒΦÔØÓÑ ÄÏ ÒÏÚĦÌÕ Errata ÎÁ ÓÅÒ×ÅÒ¦\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"äÏצÄËÉ ÐÒÏ ËÏÎƦÇÕÒÁæÀ ÷ÁÛϧ ÓÉÓÔÅÍÉ ÐÒÉ×ÅÄÅΦ × ÐÏÓÔ-ÕÓÔÁÎÏ×ÏÞÎÏÍÕ\n"
+"ÒÏÚĦ̦ ïƦæÊÎÏÇÏ ëÅÒ¦×ÎÉÃÔ×Á ëÏÒÉÓÔÕ×ÁÞÁ Mandrake Linux."
#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "paranoid"
+msgstr "ðÁÒÁÎϦÄÁÌØÎÉÊ"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
+msgid "Send mail report after each backup to:"
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -10838,253 +10556,211 @@ msgid ""
"because the file to print is provided by the application.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
+msgid "Resolution"
+msgstr "òÏÚĦÌØÎÁ ÚÄÁÔΦÓÔØ"
#: ../../printer/printerdrake.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
+"ýÏ ÄÒÕËÕ×ÁÔÉ ÎÁ SMB ÐÒÉÎÔÅÒ¦ ÷É ÍÁ¤ÔÅ ×ËÁÚÁÔÉ ÎÁÚ×Õ SMB ÈÏÓÔÁ\n"
+"(÷¦ÄͦÔØÔÅ: ÷ÏÎÁ ÍÏÖŠצÄÒ¦ÚÎÑÔÉÓÑ ×¦Ä ÊÏÇÏ TCP/IP ÎÁÚ×É!) ¦ ÍÏÖÌÉ×Ï\n"
+"ÔÁËÏÖ IP ÁÄÒÅÓÕ ÐÒÉÎÔ ÓÅÒ×ÅÒÁ ÒÁÚÏÍ Ú ¦ÍÅÎÅÍ ÓÅÒצÓÁ ÔÁ ÂÕÄØ-ÑËÉÍ\n"
+"¦ÍÅÎÅÍ ËÏÒÉÓÔÕ×ÁÞÁ ÒÁÚÏÍ Ú ÐÁÒÏÌÅÍ, ÔÁ ÒÏÂÏÞÏÀ ÇÒÕÐÏÀ."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+" Accept/Refuse icmp echo."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "reconfigure"
+msgstr "ÐÅÒÅÎÁÓÔÒϧÔÉ"
+
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
+"ãÑ ×¦ÄÅÏÐÌÁÔÁ ÍÁ¤ ЦÄÔÒÉÍËÕ ÁÐÁÒÁÔÎÏÇÏ ÐÒÉÓËÏÒÅÎÎÑ ÔÒØÏÈ×ÉͦÒÎϧ\n"
+"ÇÒÁƦËÉ, ÁÌÅ Ô¦ÌØËÉ ÄÌÑ XFree %s, ÷¶äí¶ôøôå, ýï ãå åëóðåòéíåîôáìøîéê\n"
+"òåöéí, ñëéê íïöå ðòé÷åóôé äï úá÷éóáîîñ ÷áûïçï ëïíð'àôåòá."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Xinetd Service"
+msgstr "ðÒÉÎÔÅÒ ÓÅÒ×ÅÒ"
+
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
+msgid "access to network tools"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
+msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "óÐÒÁÃÀ×ÁÌÏ ÎÏÒÍÁÌØÎÏ?"
+msgid "Here is a list of all auto-detected printers. "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
msgstr ""
-"ôÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ ÐÅÒÅÄÁÎÁ ÐÒÏÇÒÁͦ ÄÒÕËÕ.\n"
-"ðÅÒÅÄ ÔÉÍ, ÑË ÐÒÉÎÔÅÒ ÐÏÞÎÅ ÄÒÕËÕ×ÁÔÉ, ÍÏÖÌÉ×Ï ÐÒÏÊÄÅ\n"
-"ÄÅÑËÉÊ ÞÁÓ. þÉ ×¦Î ÐÒÁÃÀ¤ ËÏÒÅËÔÎÏ?\n"
+"ðÏÍÉÌËÁ ÐÒÉ ×ÓÔÁÎÏ×ÌÅÎΦ aboot,\n"
+"ÐÏÐÒÏÂÕ×ÁÔÉ ×ÓÔÁÎÏ×ÉÔÉ ÓÉÌÏÀ, ÎÁצÔØ ÑËÝÏ ÃÅ ÒÏÚÒÕÛÉÔØ ÐÅÒÛÉÊ Ð¦ÄÒÏÚĦÌ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
+"Options Description:\n"
"\n"
-msgstr ""
-"ôÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ ÐÅÒÅÄÁÎÁ ÐÒÏÇÒÁͦ ÄÒÕËÕ.\n"
-"ðÅÒÅÄ ÔÉÍ, ÑË ÐÒÉÎÔÅÒ ÐÏÞÎÅ ÄÒÕËÕ×ÁÔÉ, ÍÏÖÌÉ×Ï ÐÒÏÊÄÅ \n"
-"ÄÅÑËÉÊ ÞÁÓ.\n"
-"óÔÁÔÕÓ ÄÒÕËÕ:\n"
-"%s\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Do not print any test page"
-msgstr "äÒÕË ÔÅÓÔÏ×ÉÈ ÓÔÏÒ¦ÎÏË"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Photo test page"
-msgstr "ôÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ ÆÏÔÏÇÒÁƦÞÎϧ ÑËÏÓÔ¦"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Alternative test page (A4)"
-msgstr "äÏÄÁÔËÏ×Á ÔÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ (A4)"
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "äÏÄÁÔËÏ×Á ÔÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ (Letter)"
+msgid "Please fill or check the field below"
+msgstr "âÕÄØ-ÌÁÓËÁ ÚÁÐÏ×ΦÔØ ÁÂÏ ×ÉÂÅÒ¦ÔØ ÐÏÌÅ ×ÎÉÚÕ"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Standard test page"
-msgstr "óÔÁÎÄÁÒÔÎÁ ÔÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "þÉ ×É ÈÏÞÅÔÅ ÚÁÐÉÓÁÔÉ ËÏÎƦ­ÕÒÁæÀ /etc/fstab?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Print"
-msgstr "äÒÕË"
+msgid "Boot Protocol"
+msgstr "ðÒÏÔÏËÏÌ ÚÁ×ÁÎÔÁÖÅÎÎÑ"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No test pages"
-msgstr "îÅÍÁ¤ ÔÅÓÔÏ×ÉÈ ÓÔÏÒ¦ÎÏË"
+msgid "LVM-disks %s\n"
+msgstr "äÉÓËÉ LVM %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"÷ÉÂÅÒ¦ÔØ, ÂÕÄØ ÌÁÓËÁ, ÓÔÏÒ¦ÎËÉ ÄÌÑ ÄÒÕËÕ\n"
-"úÁÕ×ÁÖÔÅ: ÄÒÕË ÆÏÔÏÇÒÁƦÞÎÉÈ ÔÅÓÔÏ×ÉÈ ÓÔÏÒ¦ÎÏË ÍÏÖÅ ÂÕÔÉ ÄÏ×ÇÉÍ ¦\n"
-"ÌÁÚÅÒΦ ÐÒÉÎÔÅÒÉ Ú ÎÅ×ÅÌÉËÉÍ ÏÂ'¤ÍÏÍ ÐÁÍ'ÑÔ¦ ÍÏÖÕÔØ ÎÁצÔØ ÚÏ×Ó¦Í ÎÅ\n"
-"ÎÁÄÒÕËÕ×ÁÔÉ ÔÁËÕ ÓÔÏÒ¦ÎËÕ. õ ¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦Ä ÄÏÓÔÁÔÎØÏ ÎÁÄÒÕËÕ×ÁÔÉ\n"
-"ÓÔÁÎÄÁÒÔÎÕ ÐÒÏÂÎÕ ÓÔÏÒ¦ÎËÕ."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Test pages"
-msgstr "ôÅÓÔÕÀ ÓÔÏÒ¦ÎËÉ"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"÷ÓÔÁÎÏ×ÉÔÉ ÐÒÉÎÔÅÒ \"%s\"\n"
-"ÑË ÓÔÁÎÄÁÒÔÎÉÊ?"
+msgid "The package %s is needed. Install it?"
+msgstr "ñ˦ ÐÁËÅÔÉ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "ðÁÒÁÍÅÔÒ %s ×ÉÈÏÄÉÔØ ÚÁ ÒÁÍËÉ ÄÏÚ×ÏÌÅÎÉÈ ÍÅÖ!"
+msgid "On boot"
+msgstr "ðÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "ðÁÒÁÍÅÔÒ %s ÍÁ¤ ÂÕÔÉ ÞÉÓÌÏÍ!"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Bus identification"
+msgstr "á×ÔÅÎÔÉËÁæÑ"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "ðÁÒÁÍÅÔÒ %s ÍÁ¤ ÂÕÔÉ Ã¦ÌÉÍ ÞÉÓÌÏÍ!"
+msgid "Please make a backup of your data first"
+msgstr "âÕÄØ-ÌÁÓËÁ, ÓÔ×ÏÒ¦ÔØ ÓÐÏÞÁÔËÕ ÒÅÚÅÒÎÕ ËÏЦÀ ÷ÁÛÉÈ ÄÁÎÉÈ"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "÷ÉÂ¦Ò ÍÏÄÅ̦ ÐÒÉÎÔÅÒÁ"
+msgid "Vatican"
+msgstr "ìÁÔצÊÓØËÁ"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"óÔÁÎÄÁÒÔΦ ÕÓÔÁÎÏ×ËÉ ÐÒÉÎÔÅÒÁ \n"
-"ðÅÒÅÓצÄÞ¦ÔØÓÑ, ÝÏ ÒÏÚÍ¦Ò ÓÔÏÒ¦ÎËÉ ÔÁ ÔÉÐ ÞÏÒÎÉÌ (ÑËÝÏ ÔÁËÁ ÕÓÔÁÎÏ×ËÁ\n"
-"ÐÒÉÓÕÔÎÑ) ×ÓÔÁÎÏ×ÌÅΦ צÒÎÏ. úÁÕ×ÁÖÔÅ, ÝÏ Ú Û×ÉÄ˦ÓÔØ ÄÒÕËÕ Ú\n"
-"ÎÁÄÚ×ÉÞÁÊÎÏ ×ÉÓÏËÏÀ Ñ˦ÓÔÀ ÍÏÖÅ ÂÕÔÉ ÚÎÁÞÎÏ ÐÏצÌØΦÛÁ."
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "õ ÷ÁÓ Â¦ÌØÛÅ ÏÄÎÏÇÏ ÄÉÓËÕ. îÁ ÑËÉÊ Ú ÎÉÈ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ì¦ÎÁËÓ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
+msgid "Boot ISO"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr ""
+msgid "Eritrea"
+msgstr "åÒ¦ÔÒÅÁ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ¦ÎÔÅÒÎÅÔÕ"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
+msgid "Remove List"
+msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+msgid "A customizable environment"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "OKI winprinter configuration"
-msgstr "úͦÎÉÔÉ ËÏÎƦÇÕÒÁæÀ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+msgid "Inuktitut"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
+msgid "Morocco"
+msgstr "íÁÒÏËÏ"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -11092,1447 +10768,1298 @@ msgid "Which printer model do you have?"
msgstr "ñËÕ ÍÏÄÅÌØ ÐÒÉÎÔÅÒÁ ÷É ÍÁ¤ÔÅ"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer model selection"
-msgstr "÷ÉÂ¦Ò ÍÏÄÅ̦ ÐÒÉÎÔÅÒÁ"
+#, fuzzy, c-format
+msgid "Add a new printer"
+msgstr "äÏÄÁÔÉ ÐÒÉÎÔÅÒ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Reading printer database..."
-msgstr "þÉÔÁÀ ÄÁΦ ÐÒÉÎÔÅÒ¦× ..."
+msgid " All of your selected data have been "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Select model manually"
-msgstr "îÁÚ×Á צÄÄÁÌÅÎÏÇÏ ÐÒÉÎÔÅÒ"
+msgid "<-- Delete"
+msgstr "óÔÅÒÔÉ"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The model is correct"
-msgstr "÷ÓŠצÒÎÏ?"
+#: ../../lang.pm:1
+#, c-format
+msgid "Nepal"
+msgstr "îÅÐÁÌ"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
+msgid "cpu # "
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Your printer model"
-msgstr "îÁÚ×Á צÄÄÁÌÅÎÏÇÏ ÐÒÉÎÔÅÒ"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "çÏÔÕÀÔØÓÑ ÄÁΦ ÐÒÉÎÔÅÒ¦× ..."
+msgid "chunk size"
+msgstr "ÒÏÚÍ¦Ò Ä¦ÌÑÎËÉ"
-#: ../../printer/printerdrake.pm:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is then suggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Location"
-msgstr "òÏÚÔÁÛÕ×ÁÎÎÑ"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr ""
+"komandy pered zavantazhennjam, ta 'c' dlja perehodu v komandnyj rezhim."
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Description"
-msgstr "ïÐÉÓ"
+msgid "Problems installing package %s"
+msgstr "ðÏÍÉÌËÉ ÐÒÉ ÕÓÔÁÎÏ×æ ÐÁËÅÔÕ %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Name of printer"
-msgstr "îÁÚ×Á ÐÒÉÎÔÅÒÁ"
+msgid "You will receive an alert if the load is higher than this value"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakbug:1
+#, c-format
msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-"ëÏÖÎÏÍÕ ÐÒÉÎÔÅÒÕ ÐÏ×ÉÎÎÁ צÄÐÏצÄÁÔÉ ÎÁÚ×Á (ÎÁÐÒÉËÌÁÄ lp).\n"
-"ðÏÌÑ ïÐÉÓ ÔÁ òÏÚÔÁÛÕ×ÁÎÎÑ ÚÁÐÏ×ÎÀ×ÁÔÉ ÎÅÏÂÏ×'ÑÚËÏ×Ï. ÷ÏÎÉ ¤\n"
-"ÌÉÛ ËÏÍÅÎÔÁÒÑÍÉ ÄÌÑ ËÏÒÉÓÔÕ×ÁÞ¦×."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Enter Printer Name and Comments"
+msgid "Add a scanner manually"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr ""
+msgid "Reload partition table"
+msgstr "ðÒÏÞÉÔÁÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
+msgid "Yes, I want autologin with this (user, desktop)"
msgstr ""
+"ôÁË, Ñ ÈÏÞÕ Á×ÔÏÍÁÔÉÞÎÏ ÒŤÓÔÒÕ×ÁÔÉÓÑ × ÓÉÓÔÅͦ Ú ÃÉÍ (¦ÍÅÎÅÍ, ÓÅÒÅÄÏ×ÉÝÅÍ)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid "Search for fonts in installed list"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Scanning on your HP multi-function device"
+msgid "The Local Network did not finish with `.0', bailing out."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing mtools packages..."
-msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÕ %s"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Installing SANE packages..."
-msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÕ %s"
+msgid "Boot"
+msgstr "Root"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid "Installing HPOJ package..."
-msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÕ %s"
+msgid "Tuner type:"
+msgstr "úͦÎÉÔÉ ÔÉÐ"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "A command line must be entered!"
-msgstr "ðÏÔÒ¦ÂÎÏ ××ÅÓÔÉ ËÏÒÅËÔÎÉÊ URI!"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Command line"
-msgstr "îÁÚ×Á ÄÏÍÅÎÕ"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "\"Menu\" key"
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Pipe into command"
-msgstr "ðÅÒÅÎÁÐÒÁ×ÉÔÉ ÒÏÂÏÔÕ ÐÏ ËÁÎÁÌÕ × ËÏÍÁÎÄÕ"
+msgid "Security Administrator:"
+msgstr "ïÐæ§ צÄÄÁÌÅÎÏÇÏ ÐÒÉÎÔÅÒÁ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Detected model: %s %s"
-msgstr "ÚÎÁÊÄÅÎÏ %s"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr "ðÏÔÒ¦ÂÎÏ ××ÅÓÔÉ ËÏÒÅËÔÎÉÊ URI!"
+msgid "Please enter your login"
+msgstr "âÕÄØ-ÌÁÓËÁ, ÓÐÒÏÂÕÊÔÅ ÝÅ ÒÁÚ"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Printer Device URI"
-msgstr "URI ÐÒÉÓÔÒÏÀ ÐÒÉÎÔÅÒÁ"
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-"íÏÖÎÁ ×ËÁÚÁÔÉ ÂÅÚÐÏÓÅÒÅÄÎØÏ URI ÄÌÑ ÄÏÓÔÕÐÕ ÄÏ ÐÒÉÎÔÅÒÁ. URI ÍÁ¤\n"
-"צÄÐÏצÄÁÔÉ ÓÐÅÃÉƦËÁæÑÍ ÁÂÏ CUPS ÁÂÏ Foomatic. úÁÕ×ÁÖÔÅ, ÏÄÎÁË, ÝÏ\n"
-"ÎÅ ×Ó¦ ÔÉÐÉ URI ЦÄÔÒÉÍÕÀÔØÓÑ ÚÁÓÏÂÁÍÉ ËÅÒÕ×ÁÎÎÑ ÞÅÒÇ ÄÒÕËÕ."
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Port"
-msgstr "ðÏÒÔ"
+"÷É ÎÅ ÍÁ¤ÔÅ ÖÏÄÎÏÇÏ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ.\n"
+"óÔ×ÏÒ¦ÔØ ÔÁËÅ Ú'¤ÄÎÁÎÎÑ ËÌÁÃÎÕ×ÛÉ ÎÁ \"îÁÓÔÒϧÔÉ\""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Printer host name or IP"
-msgstr "îÁÚ×Á ÈÏÓÔÁ ÐÒÉÎÔÅÒÁ"
+msgid "Fonts copy"
+msgstr "æÏÒÍÁÔÕ×ÁÔÉ ÄÉÓËÅÔÕ"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "îÏÍÅÒ ÐÏÒÔÁ ÍÁ¤ ÂÕÔÉ Ã¦ÌÉÍ ÞÉÓÌÏÍ!"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer host name or IP missing!"
-msgstr "îÅÍÁ¤ ÎÁÚ×É ÈÏÓÔÁ ÐÒÉÎÔÅÒÁ!"
+msgid "Automated"
+msgstr "á×ÔÏÍÁÔÉÚÏ×ÁÎÁ"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"ýÏ ÄÒÕËÕ×ÁÔÉ ÎÁ ÐÒÉÎÔÅÒ¦ × ÍÅÒÅÖ¦, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÎÁÄÁÔÉ ÎÁÚ×Õ ÈÏÓÔÁ\n"
-"ÐÒÉÎÔÅÒÁ, ÔÁ ÍÏÖÌÉ×Ï ÎÏÍÅÒ ÐÏÒÔÁ. îÁ ÓÅÒ×ÅÒÁÈ HP JetDirect ÎÏÍÅÒ ÐÏÒÔÁ\n"
-"Õ Â¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦× 9100, ÎÁ ¦ÎÛÉÈ ÍÏÖÅ\n"
-"צÄÒ¦ÚÎÑÔÉÓØ. ðÒÏËÏÎÓÕÌØÔÕÊÔÅÓØ Ú ¦ÎÓÔÒÕËæ¤À ÄÏ ÁÐÁÒÁÔÎÏÇÏ\n"
-"ÚÁÂÅÚÐÅÞÅÎÎÑ."
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "þÉ ×É ÈÏÞÅÔÅ ×ÉÐÒÏÂÕ×ÁÔÉ ÎÏ×Õ ËÏÎƦ­ÕÒÁæÀ?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "ðÁÒÁÍÅÔÒÉ ÐÒÉÎÔÅÒÁ × ÍÅÒÅÖ¦"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Host \"%s\", port %s"
+msgid ""
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
+"\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
+"\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
+"\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
+"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Scanning network..."
-msgstr "ðÏÞÉÎÁÀ Ú'¤ÄÎÁÎÎÑ..."
+msgid "Save packages selection"
+msgstr "úÂÅÒÅÇÔÉ ×ÉÂ¦Ò ÐÁËÅÔ¦×"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Printer auto-detection"
-msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
+msgid "Remove the last item"
+msgstr "óÔÅÒÔÉÆÁÊÌÕ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "îÅÍÁ¤ ÎÁÚ×É ÞÅÒÇÉ NCP!"
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "îÅÍÁ¤ ÎÁÚ×É ÓÅÒ×ÅÒÁ NCP!"
+msgid "No net boot images created!"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Print Queue Name"
-msgstr "îÁÚ×Á ÐÒÉÎÔÅÒÁ"
+msgid "use pptp"
+msgstr "×ÖÉ×ÁÔÉ pptp"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Printer Server"
-msgstr "ðÒÉÎÔÅÒ ÓÅÒ×ÅÒ"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+msgid "Choose which services should be automatically started at boot time"
msgstr ""
-"äÌÑ ÔÏÇÏ, ÝÏ ÄÒÕËÕ×ÁÔÉ ÎÁ NetWare ÐÒÉÎÔ-ÓÅÒ×ÅÒ¦, ÷É ÐÏ×ÉÎΦ\n"
-"×ËÁÚÁÔÉ ÎÁÚ×Õ ÐÒÉÎÔ-ÓÅÒ×ÅÒÁ (úÁÕ×ÁÖÔÅ! ×ÏÎÁ ÍÏÖŠצÄÒ¦ÚÎÑÔÉÓÑ ×¦Ä\n"
-"TCP/IP ¦ÍÅΦ ÈÏÓÔÁ!) ÒÁÚÏÍ Ú ÎÁÚ×ÏÀ ÐÒÉÎÔÅÒÁ, ÑËÉÍ ÷É ÈÏÞÅÔÅ\n"
-"ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÔÁ צÄÐÏצÄÎÉÍ ¦ÍÅÎÅÍ ËÏÒÉÓÔÕ×ÁÞÁ Ú ÐÁÒÏÌÅÍ."
+"÷ÉÂÅÒ¦ÔØ, Ñ˦ ÓÅÒצÓÉ ÍÁÀÔØ ÓÔÁÒÔÕ×ÁÔÉ Á×ÔÏÍÁÔÉÞÎÏ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "NetWare Printer Options"
-msgstr "ïÐæ§ ÐÒÉÎÔÅÒÁ NetWare"
+#, fuzzy, c-format
+msgid "Learn how to use this printer"
+msgstr "þÉ ×É ÈÏÞÅÔÅ ×ÉÐÒÏÂÕ×ÁÔÉ ÎÏ×Õ ËÏÎƦ­ÕÒÁæÀ?"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
+#, fuzzy, c-format
+msgid "Configure the network now"
+msgstr "îÁÓÔÒϧÔÉ ÍÅÒÅÖÕ"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
+msgid "Choose a mirror from which to get the packages"
+msgstr "÷ÉÂÅÒ¦ÔØ ÓÅÒ×ÅÒ, Ú ÑËÏÇÏ Ú×ÁÎÔÁÖÉÔÉ ÐÁËÅÔÉ"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
+"ðÒÏÇÒÁÍÁ ÚͦÎÉ ÒÏÚͦÒÕ Ð¦ÄÒÏÚĦÌÕ FAT ÎÅ ÍÏÖÅ ÐÒÁÃÀ×ÁÔÉ Ú ÷ÁÛÉÍ\n"
+"ЦÄÒÏÚĦÌÏÍ, ÐÒÉ ÒÏÂÏÔ¦ ÓÔÁÌÁÓÑ ÔÁËÁ ÐÏÍÉÌËÁ: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr ""
+msgid "Which sector do you want to move it to?"
+msgstr "îÁ ÑËÉÊ ÓÅËÔÏÒ ÐÅÒÅͦÓÔÉÔÉÓÑ?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Samba share name missing!"
-msgstr "îÅÍÁ¤ ÎÁÚ×É ÒÅÓÕÒÓÕ samba!"
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Do you want to click on this button?"
+msgstr "þÉ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ aboot?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "íÁÀÔØ ÂÕÔÉ ×ËÁÚÁÎÉÍÉ ÁÂÏ ÎÁÚ×Á ÓÅÒ×ÅÒÁ, ÁÂÏ ÊÏÇÏ IP ÁÄÒÅÓÁ!"
+msgid "Bahamas"
+msgstr "âÁÇÁÍÉ"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Auto-detected"
-msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Workgroup"
-msgstr "òÏÂÏÞÁ ÇÒÕÐÁ"
+msgid "Manual configuration"
+msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ¦ÎÔÅÒÎÅÔÕ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Share name"
-msgstr "îÁÚ×Á ÒÅÓÕÒÓÕ"
+msgid "search"
+msgstr "ÐÏÛÕË"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "IP ÁÄÒÅÓÁ SMB ÓÅÒ×ÅÒÁ"
+msgid ""
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
+msgstr ""
+"ãÅÊ ÐÁËÅÔ ÚÁ×ÁÎÔÁÖÕ¤ ×ÉÂÒÁÎÕ ÒÏÚËÌÁÄËÕ ËÌÁצÁÔÕÒÉ, ÑËÁ ×ÓÔÁÎÏ×ÌÀ¤ÔØÓÑ\n"
+"× /etc/sysconfig/keyboard. ãÑ ËÌÁצÁÔÕÒÁ ÍÏÖÅ ÂÕÔÉ ×ÉÂÒÁÎÁ ÚÁ\n"
+"ÄÏÐÏÍÏÇÏÀ ÐÒÏÇÒÁÍÉ kbdconfig. ëÒÁÝÅ ÚÁÌÉÛÉÔÉ ÃÅÊ ÐÁËÅÔ ÐÒÁÃÀÀÞÉÍ ÎÁ\n"
+"¦ÌØÛÏÓÔ¦ ÓÉÓÔÅÍ."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "îÁÚ×Á ÈÏÓÔÁ SMB ÓÅÒ×ÅÒÁ"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (ÄÒÁÊ×ÅÒ ÄÉÓÐÌÅÑ ÄÌÑ ÕÓÔÁÎÏ×ËÉ)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
+msgid "Zeroconf host name must not contain a ."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-"ýÏ ÄÒÕËÕ×ÁÔÉ ÎÁ SMB ÐÒÉÎÔÅÒ¦ ÷É ÍÁ¤ÔÅ ×ËÁÚÁÔÉ ÎÁÚ×Õ SMB ÈÏÓÔÁ\n"
-"(÷¦ÄͦÔØÔÅ: ÷ÏÎÁ ÍÏÖŠצÄÒ¦ÚÎÑÔÉÓÑ ×¦Ä ÊÏÇÏ TCP/IP ÎÁÚ×É!) ¦ ÍÏÖÌÉ×Ï\n"
-"ÔÁËÏÖ IP ÁÄÒÅÓÕ ÐÒÉÎÔ ÓÅÒ×ÅÒÁ ÒÁÚÏÍ Ú ¦ÍÅÎÅÍ ÓÅÒצÓÁ ÔÁ ÂÕÄØ-ÑËÉÍ\n"
-"¦ÍÅÎÅÍ ËÏÒÉÓÔÕ×ÁÞÁ ÒÁÚÏÍ Ú ÐÁÒÏÌÅÍ, ÔÁ ÒÏÂÏÞÏÀ ÇÒÕÐÏÀ."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "ïÐæ§ SMB (Windows 9x/NT) ÐÒÉÎÔÅÒÁ"
+"syslog - ÃÅ ÓÅÒ×¦Ó × ÓÉÓÔÅͦ, ÚÁ ÄÏÐÏÍÏÇÏÀ ÑËÏÇÏ ÄÅÍÏÎÉ ÚÁÐÉÓÕÀÔØ\n"
+"ÓÉÓÔÅÍΦ ÐÏצÄÏÍÌÅÎÎÑ Õ Ò¦ÚΦ ÓÉÓÔÅÍΦ ÆÁÊÌÉ ÒŤÓÔÒÁæ§ ÐÏצÄÏÍÌÅÎØ. ÷\n"
+"ÂÕÄØ-ÑË¦Ê ÓÉÓÔÅͦ ÎÅÐÏÇÁÎÏ ÍÁÔÉ syslog."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "÷ÉÍÉËÁÀ ÍÅÒÅÖÕ"
+msgid "Unknown/Others"
+msgstr "úÁÇÁÌØÎÅ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
+msgid "No TV Card detected!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote printer name missing!"
-msgstr "÷¦ÄÓÕÔÎÑ ÎÁÚ×Á ÐÒÉÎÔÅÒÁ!"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "îÅÍÁ¤ ÎÁÚ×É ×¦ÄÄÁÌÅÎÏÇÏ ÈÏÓÔÁ!"
+msgid "Options"
+msgstr "ðÁÒÁÍÅÔÒÉ"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "îÁÚ×Á צÄÄÁÌÅÎÏÇÏ ÐÒÉÎÔÅÒ"
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "ðÒÉÎÔÅÒ \"%s\" ×ÓÔÁÎÏ×ÌÅÎÏ ÏÓÎÏ×ÎÉÍ"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote host name"
-msgstr "îÁÚ×Á צÄÄÁÌÅÎÏÇÏ ÈÏÓÔÁ"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"ýÏ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ×¦ÄÄÁÌÅÎÉÊ lpd ÐÒÉÎÔÅÒ, ÷É ÍÁ¤ÔÅ ×ËÁÚÁÔÉ ÎÁÚ×Õ\n"
-"ÈÏÓÔÁ ÐÒÉÎÔ-ÓÅÒ×ÅÒÁ ÔÁ ÎÁÚ×Õ ÐÒÉÎÔÅÒÁ ÎÁ ÃØÏÍÕ ÈÏÓÔ¦."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "ïÐæ§ צÄÄÁÌÅÎÏÇÏ ÐÒÉÎÔÅÒÁ"
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Manual configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ¦ÎÔÅÒÎÅÔÕ"
+msgid "Auto-detected"
+msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "÷×ÅĦÔØ URI ÐÒÉÓÔÒÏÀ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
+"ôÅÐÅÒ Ð¦ÓÌÑ ÔÏÇÏ, ÑË ÐÁÒÁÍÅÔÒÉ ÷ÁÛÏÇÏ Ú'¤ÄÎÁÎÎÑ Ú ¶ÎÔÅÒÎÅÔÏÍ\n"
+"×ÓÔÁÎÏ×ÌÅΦ, ÷É ÍÏÖÅÔÅ ÓËÏƦ­ÕÒÕ×ÁÔÉ Ó×¦Ê ËÏÍÐ'ÀÔÅÒ ÔÁËÉÍ ÞÉÎÏÍ, ÝÏÂ\n"
+"צΠÄÏÚ×ÏÌÑ× ÓЦÌØÎÅ ×ÉËÏÒÉÓÔÁÎÎÑ Ó×ÏÇÏ Ú'¤ÄÎÁÎÎÑ ÄÏ\n"
+"¶ÎÔÅÒÎÅÔÕ. \n"
+"\n"
+"ðÒÉͦÔËÁ: ÷ÁÍ ÄÌÑ ÃØÏÇÏ ÐÏÔÒ¦ÂÎÏ ÍÁÔÉ ÐÌÁÔÕ ÍÅÒÅÖ¦, ÝÏ ÎÁÓÔÒϧÔÉ\n"
+"ÌÏËÁÌØÎÕ ÍÅÒÅÖÕ (LAN)."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "÷ÉÂÅÒ¦ÔØ ÄÏ ÑËÏÇÏ ÐÏÓ̦ÄÏ×ÎÏÇÏ ÐÏÒÔÁ ЦÄËÌÀÞÅÎÉÊ ÷ÁÛ ÍÏÄÅÍ?"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "÷ÉÂÅÒ¦ÔØ ÄÏ ÑËÏÇÏ ÐÏÓ̦ÄÏ×ÎÏÇÏ ÐÏÒÔÁ ЦÄËÌÀÞÅÎÉÊ ÷ÁÛ ÍÏÄÅÍ?"
+"îÅ ×ÉÓÔÁÞÁ¤ צÌØÎÏÇÏ Í¦ÓÃÑ ÄÌÑ 1íâ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÏÇÏ ÂÌÏËÕ! õÓÔÁÎÏ×ËÁ\n"
+"ÂÕÄÅ ÐÒÏÄÏ×ÖÕ×ÁÔÉÓØ, ÁÌÅ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ Ó×Ϥ§ ÓÉÓÔÅÍÉ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ\n"
+"ÂÕÄÅ ÓÔ×ÏÒÉÔÉ DiskDrake'ÏÍ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÉÊ Ð¦ÄÒÏÚÄ¦Ì "
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"Please choose the printer you want to set up or enter a device name/file "
+"name in the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr ""
+msgid "Refuse"
+msgstr "÷¦ÄËÉÎÕÔÉ"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr ""
+msgid "HFS"
+msgstr "HFS"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
+"HardDrake ×ÉËÏÎÕ¤ ÔÅÓÔÕ×ÁÎÎÑ ÁÐÁÒÁÔÎÏÇÏ ÚÁÂÅÚÐÅÞÅÎÎÑ ¦ ÑËÝÏ ÐÏÔÒ¦ÂÎÏ\n"
+"ËÏÎƦ­ÕÒÕ¤ ÎÏ×Å ÁÂÏ ÚͦÎÅÎÅ ÁÐÁÒÁÔÎÅ ÚÁÂÅÚÐÅÞÅÎÎÑ."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "The following printer was auto-detected. "
-msgstr "㦠ÐÁËÅÔÉ ÂÕÄÕÔØ ÄŦÎÓÔÁÌØÏ×ÁÎÉÍÉ"
+msgid "Remote Printers"
+msgstr "÷¦ÄÄÁÌÅÎÉÊ ÐÒÉÎÔÅÒ"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
+msgid "Creating and formatting file %s"
+msgstr "óÔ×ÏÒÀÀ ÔÁ ÆÏÒÍÁÔÕÀ ÆÁÊÌ %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
+msgid "if set to yes, check additions/removals of sgid files."
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Available printers"
-msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No printer found!"
-msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
+msgid "Choose an existing LVM to add to"
+msgstr "÷ÉÂÅÒ¦ÔØ ¦ÓÎÕÀÞÉÊ LVM, ÄÏ ÑËÏÇÏ ÄÏÄÁÔÉ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "You must enter a device or file name!"
-msgstr "÷×ÅĦÔØ URI ÐÒÉÓÔÒÏÀ ÐÒÉÎÔÅÒÁ"
+msgid "xfs restart"
+msgstr "ÏÂÍÅÖÉÔÉ"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
msgstr ""
+"ðÒÉÎÔÅÒ Ú ÎÁÚ×ÏÀ \"%s\" ×ÖÅ ¦ÓÎÕ¤.\n"
+"÷É Ä¦ÊÓÎÏ ÂÁÖÁ¤ÔÅ ÐÅÒÅÐÉÓÁÔÉ ÊÏÇÏ ËÏÎƦ­ÕÒÁæÀ?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local Printer"
-msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No partition available"
+msgstr "ÎÅÍÁ¤ ЦÄÒÏÚĦ̦×"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "USB printer \\#%s"
-msgstr "îÅÍÁ¤ ÐÒÉÎÔÅÒÁ"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Use the scanners on hosts: "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "îÁÚ×Á ÈÏÓÔÁ ÐÒÉÎÔÅÒÁ"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselected All"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "ðÒÉÎÔÅÒ ÎÁ ÓÅÒ×ÅÒ¦ SMB/Windows 95/98/NT "
+msgid "Domain Name Resolver"
+msgstr "îÁÚ×Á ÄÏÍÅÎÕ"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "ðÒÉÎÔÅÒ × ÍÅÒÅÖ¦ (ÓÏËÅÔ)"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Encryption key (again)"
+msgstr ""
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "ÚÎÁÊÄÅÎÏ %s"
+#, c-format
+msgid "Samba share name missing!"
+msgstr "îÅÍÁ¤ ÎÁÚ×É ÒÅÓÕÒÓÕ samba!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "True Type install done"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "ðÒÉÎÔÅÒ ÎÁ ÓÅÒ×ÅÒ¦ SMB/Windows 95/98/NT "
+msgid "Detection in progress"
+msgstr "ÚÎÁÊÄÅÎÏ ÎÁ ÐÏÒÔÕ %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ", network printer \"%s\", port %s"
+msgid "Build Whole Kernel -->"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
+msgid "Welcome to %s"
+msgstr "ìÁÓËÁ×Ï ÐÒÏÓÉÍÏ ÄÏ %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "÷ÓÔÁ×ÔÅ ÄÉÓËÅÔÕ ðÏÎÏ×ÌÅÎÎÑ íÏÄÕÌ¦× × ÄÉÓËÏ×¦Ä %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
+msgid "Bootsplash"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "÷¦ÄÄÁÌÅÎÉÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+"%s%s\n"
+"is directly connected to your system"
+msgstr "õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦!"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer sharing on hosts/networks: "
+msgstr "äÒÕË"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
+"÷ ÄÅÑËÉÈ ×ÉÐÁÄËÁÈ ÄÒÁÊ×ÅÒ %s ×ÉÍÁÇÁ¤ ÄÏÄÁÔËÏ×ϧ ¦ÎÆÏÒÍÁæ§ ÄÌÑ ÔÏÇÏ,\n"
+"ÝÏ צÒÎÏ ÐÒÁÃÀ×ÁÔÉ, ÈÏÞÁ Ú×ÉÞÁÊÎÏ ÐÒÁÃÀ¤ ÎÏÒÍÁÌØÎÏ ÂÅÚ Îŧ. þÉ ÎÅ\n"
+"ÈÏÔ¦ÌÉ Â ×É ×ËÁÚÁÔÉ ÄÏÄÁÔËÏצ ÏÐæ§ ÄÌÑ ÎØÏÇÏ ÞÉ ÄÏÚ×ÏÌÉÔÉ ÄÒÁÊ×ÅÒÕ\n"
+"×ÉÐÒÏÂÕ×ÁÔÉ ÷ÁÛÕ ÓÉÓÔÅÍÕ, ÝÏ ÚÎÁÊÔÉ ÐÏÔÒ¦ÂÎÕ ¦ÎÆÏÒÍÁæÀ? ¶ÎËÏÌÉ ÔÁËÅ\n"
+"×ÉÐÒÏÂÏ×Õ×ÁÎÎÑ ÍÏÖÅ ÐÒÉ×ÅÓÔÉ ÄÏ ÚÁ×ÉÓÁÎÎÑ ËÏÍÐ'ÀÔÅÒÁ, ÁÌÅ ÎÅ ÐÏ×ÉÎÎÏ\n"
+"ΦÑË ÚÁÛËÏÄÉÔÉ ÊÏÍÕ."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+msgid "Not the correct CD label. Disk is labelled %s."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"Click on Configure to launch the setup wizard."
msgstr ""
+"ìÁÓËÁ×Ï ÐÒÏÓÉÍÏ ÄÏ ÐÒÏÇÒÁÍÉ ËÏÎƦ­ÕÒÁæ§ ÓЦÌØÎÏÇÏ ËÏÒÉÓÔÕ×ÁÎÎÑ\n"
+"Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ\n"
+"\n"
+"%s\n"
+"\n"
+"ëÌÁÃΦÔØ ÎÁ \"îÁÓÔÒϧÔÉ\" ÝÏ ÚÁÐÕÓÔÉÔÉ ËÏÎƦ­ÕÒÁÔÏÒ."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid ")"
-msgstr ""
+msgid "Cuba"
+msgstr "ëÕÂÁ"
#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Searching for new printers..."
+msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
+
+#: ../../lang.pm:1
#, c-format
-msgid " on "
-msgstr ""
+msgid "Belize"
+msgstr "âÅ̦Ú"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "("
+msgid " (multi-session)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "îÁÓÔÒÏÀÀ ÐÒÉÎÔÅÒ \"%s\"..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Searching for new printers..."
-msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
+#: ../../any.pm:1
+#, c-format
+msgid "Kernel Boot Timeout"
+msgstr "úÁÔÒÉÍËÁ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÑÄÒÁ"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
+"÷ÁÛÁ צÄÅÏÐÌÁÔÁ ÍÏÖÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÁÐÁÒÁÔÎÉÍ ÐÒÉÓËÏÒÅÎÎÑÍ\n"
+"ÔÒØÏÈ×ÉͦÒÎϧ ÇÒÁƦËÉ ÁÌÅ Ô¦ÌØËÉ Ú ÓÅÒ×ÅÒÏÍ XFree %s. ÷ÁÛÁ צÄÅÏÐÌÁÔÁ\n"
+"ЦÄÔÒÉÍÕ¤ÔØÓÑ ÓÅÒ×ÅÒÏÍ XFree %s, Õ ÑËÏÍÕ ×É ÍÏÖÌÉ×Ï ÍÁÔÉÍÅÔÅ ËÒÁÝÉÊ\n"
+"ÓÕÐÒÏ×¦Ä ÄÌÑ Ä×ÏÈ×ÉͦÒÎϧ ÇÒÁƦËÉ."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "þÉ ÷É ÈÏÞÅÔŠצÄËÒÉ×ÁÔÉ Ú'¤ÄÎÁÎÎÑ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ?"
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "ðÏͦÞÎÉË ÒÏÚÂÉ×ËÉ ÎÁ ЦÄÒÏÚĦÌÉ DrakX ÚÎÁÊÛÏ× ÔÁ˦ ÍÏÖÌÉצ Ò¦ÛÅÎÎÑ:"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr ""
-"÷ÓÔÁÎÏ×ÉÔÉ ÐÒÉÎÔÅÒ \"%s\"\n"
-"ÑË ÓÔÁÎÄÁÒÔÎÉÊ?"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Hungarian"
+msgstr "õÇÏÒÓØËÁ"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
+"÷ÉÂÅÒ¦ÔØ Ó×ÏÇÏ ÐÒÏ×ÁÊÄÅÒÁ.\n"
+"ñËÝÏ ÊÏÇÏ ÎÅÍÁ¤ × ÓÐÉÓËÕ, ×ÉÂÅÒ¦ÔØ ¶ÎÛÉÊ"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "÷ÉÂÅÒ¦ÔØ ÄÏ ÑËÏÇÏ ÐÏÓ̦ÄÏ×ÎÏÇÏ ÐÏÒÔÁ ЦÄËÌÀÞÅÎÉÊ ÷ÁÛ ÍÏÄÅÍ?"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Automatic time synchronization (using NTP)"
+msgstr "á×ÔÏÍÁÔÉÞÎÁ ÓÉÎÈÒÏΦÚÁÃ¦Ñ ÞÁÓÕ (¦Ú ÚÁÓÔÏÓÕ×ÁÎÎÑÍ NTP)"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
+msgid "8 MB"
+msgstr "8 íÂ"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
+msgid "LDAP Server"
+msgstr "óÅÒ×ÅÒ LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
+"PCMCIA ЦÄÔÒÉÍËÁ ÐÏÔÒ¦ÂÎÁ × ÏÓÎÏ×ÎÏÍÕ ÄÌÑ ÚÁÂÅÚÐÅÞÅÎÎÑ ÒÏÂÏÔÉ ÔÁËÉÈ\n"
+"ÒÅÞÅÊ, ÑË ethernet ÔÁ ÍÏÄÅÍ × ÐÅÒÅÎÏÓÎÉÈ ËÏÍÐ'ÀÔÅÒÁÈ. ðÁËÅÔ ÎÅ ÐÏÞÎÅ\n"
+"ÐÒÁÃÀ×ÁÔÉ, ÑËÝÏ ÊÏÇÏ ÎÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ. ïÔÖÅ, ÊÏÇÏ ÂÅÚÐÅÞÎÏ\n"
+"×ÓÔÁÎÏ×ÌÀ×ÁÔÉ ÎÁ ËÏÍÐ'ÀÔÅÒÁÈ, ÎÁצÔØ ÑËÝÏ ×¦Î ÎÅ ÂÕÄÅ\n"
+"×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr "õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦!"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦!"
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Choose your country"
+msgstr "÷ÉÂÅÒ¦ÔØ ËÒÁ§ÎÕ"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakbackup:1
+#, c-format
msgid ""
-"The following printers\n"
"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦!"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and %d unknown printers"
-msgstr "äÏÄÁÔÉ ÐÒÉÎÔÅÒ"
+"- System Files:\n"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "and one unknown printer"
-msgstr "äÏÄÁÔÉ ÐÒÉÎÔÅÒ"
+msgid "Standalone Tools"
+msgstr "úÁÓÏÂÉ ÄÌÑ ËÏÎÓÏ̦"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Checking your system..."
-msgstr "ñËÕ ÓÉÓÔÅÍÕ ÄÒÕËÕ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ?"
+msgid "Where"
+msgstr "ëÏ̦ÝÁÔËÏ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Restarting CUPS..."
-msgstr ""
+msgid "but not matching"
+msgstr "ÁÌŠΊצÄÐÏצÄÁ¤"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "÷ÓŠצÒÎÏ?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "îÅÍÁ¤ ÎÁÚ×É ÓÅÒ×ÅÒÁ NCP!"
+msgid "Configuring PCMCIA cards..."
+msgstr "ëÏÎƦÇÕÒÕÀ ËÁÒÔËÉ PCMCIA..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
+msgid "kdesu missing"
+msgstr "ÎÅÍÁ¤ kdesu"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
+msgid "Encryption key"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "ðÒÉÎÔÅÒ ÎÁ צÄÄÁÌÅÎÏÍÕ ÓÅÒ×ÅÒ¦ CUPS"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "ÚÎÁÊÄÅÎÏ %s"
+#: ../../lang.pm:1
+#, c-format
+msgid "Christmas Island"
+msgstr "ò¦ÚÄ×Á ÏÓÔÒ¦×"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "äÏÄÁÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "õÓÔÁÎÏ×ËÁ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ ÎÅÕÓЦÛÎÁ. óÔÁÌÁÓÑ ÐÏÍÉÌËÁ:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
+msgid "EIDE/SCSI channel"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr ""
+msgid "Set this printer as the default"
+msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÑË ÏÓÎÏ×ÎÉÊ ÐÒÉÎÔÅÒ"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "partition %s"
+msgstr "ЦÄÒÏÚÄ¦Ì %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
+msgid "Paranoid"
+msgstr "ðÁÒÁÎϦÄÁÌØÎÉÊ"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
+msgid "NIS"
+msgstr "NIS"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "<-- Del User"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
+msgid "Location on the bus"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Sharing of local printers"
+msgid "No printer found!"
msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected host/network"
-msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
+msgid "the vendor name of the device"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr ""
+msgid "Erase entire disk"
+msgstr "óÔÅÒÔÉ ×ÅÓØ ÄÉÓË"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
+msgid " (Default)"
+msgstr " (ïÓÎÏ×ÎÁ)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
+msgid "Automatic reconfiguration"
msgstr "á×ÔÏÍÁÔÉÞÎÁ ËÏÎƦ­ÕÒÁÃ¦Ñ CUPS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
+msgid "Receiving Speed:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "îÁÓÔÒϧÔÉ ÍÅÒÅÖÕ"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "None"
-msgstr "úÁ˦ÎÞÅÎÏ"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "IP ÁÄÒÅÓÁ CUPS ÓÅÒ×ÅÒÁ"
+msgid "Turks and Caicos Islands"
+msgstr "ïÓÔÒÏ×É ôÕÒËÓ ¦ ëÁÊËÏÓ"
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "No remote machines"
-msgstr "(ÎÁ Ã¦Ê ÍÁÛÉΦ)"
+msgid "permissions"
+msgstr "ЦÄÒÏÚÄ¦Ì %s"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ¦ÎÔÅÒÎÅÔÕ"
+#, c-format
+msgid "<- Previous"
+msgstr "<- ðÏÐÅÒÅÄΦÊ"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "äÒÕË"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing configuration"
+msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÓЦÌØÎÏÇÏ ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ."
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
+msgid "Toggle between flat and group sorted"
+msgstr "ðÅÒÅÍÉËÎÕÔÉ Í¦Ö ÐÏËÁÚÏÍ ÐÏ ÇÒÕÐÁÍ ¦ Ú×ÉÞÁÊÎÉÍ ÓÐÉÓËÏÍ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
+msgid "Themes"
+msgstr "ôÅÍÉ"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
+msgid "Options: %s"
+msgstr "ðÁÒÁÍÅÔÒÉ: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
+"×É ËÏÒÉÓÔÕ¤ÔÅÓØ ÚÁ×ÁÎÔÁÖÕ×ÁÞÅÍ ÓÉÓÔÅÍ %s.\n"
+"ëÌÁÃΦÔØ ÎÁ \"îÁÓÔÒϧÔÉ\" ÝÏ ÓÔÁÒÔÕ×ÁÔÉ ÐÏͦÞÎÉË ÕÓÔÁÎÏ×ËÉ."
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "CUPS printer configuration"
+msgid "OKI winprinter configuration"
msgstr "úͦÎÉÔÉ ËÏÎƦÇÕÒÁæÀ ÐÒÉÎÔÅÒÁ"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr ""
+msgid "Saint Helena"
+msgstr "ó×ÑÔÁ åÌÅÎÁ"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
+msgid "Security Level"
+msgstr "÷ÓÔÁÎÏ×ÌÅÎÎÑ Ò¦×ÎÑ ÂÅÚÐÅËÉ"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"äÅÑ˦ ËÒÏËÉ ÎÅ ÚÁ×ÅÒÛÅΦ.\n"
"\n"
-"äÌÑ ×¦ÄÄÁÌÅÎÏÇÏ ÓÅÒ×ÅÒÁ CUPS ÷ÁÍ ÎÅ ÐÏÔÒ¦ÂÎÏ ËÏÎƦ­ÕÒÕ×ÁÔÉ ÐÒÉÎÔÅÒ¦×,\n"
-"×Ó¦ ÐÒÉÎÔÅÒÉ ÂÕÄÕÔØ Á×ÔÏÍÁÔÉÞÎÏ ×ÉÚÎÁÞÅΦ. ñËÝÏ ÷É ÓÕÍΦ×Á¤ÔÅÓØ,\n"
-"×ÉÂÅÒ¦ÔØ \"÷¦ÄÄÁÌÅÎÉÊ ÓÅÒ×ÅÒ CUPS\"."
+"÷É Ä¦ÊÓÎÏ ÈÏÞÅÔÅ ÐÒÉÐÉÎÉÔÉ ÚÁÒÁÚ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "ñË ÐÒÉÎÔÅÒ Ú'¤ÄÎÁÎÉÊ"
+msgid "Sudan"
+msgstr "óÕÄÁÎ"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "÷ÉÂÅÒ¦ÔØ Ú'¤ÄÎÁÎÎÑ ÐÒÉÎÔÅÒÁ"
+msgid "Polish (qwertz layout)"
+msgstr "ðÏÌØÓØËÁ (ÒÏÚËÌÁÄËÁ qwertz)"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Syria"
+msgstr "óÕÒ¦ÎÁÍ"
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
+"\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the user umask."
msgstr ""
+"Laskavo prosymo do %s - peremykacha operaciynih system!\n"
+"\n"
+"Vyberit' odnu z operaciynikh system v spysku abo pochekajte %d sekund\n"
+"poki pochne vantazhytysja persha z inh.\n"
+"\n"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (val)\n"
-"\n"
-"Set the shell timeout. A value of zero means no timeout."
-msgstr ""
+msgid "Portuguese"
+msgstr "ðÏÒÔÕÇÁÌØÓØËÁ"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (size)\n"
-"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
+msgid "Loopback file name: "
+msgstr "îÁÚ×Á ÆÁÊÌÕ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ: "
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "IP ÁÄÒÅÓÁ ÍÁ¤ ÂÕÔÉ Õ ÆÏÒÍÁÔ¦ 1.2.3.4"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Serbia"
+msgstr "ÐÏÓ̦ÄÏ×ÎÉÊ"
+
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
+msgid "Newzealand"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
+msgid "This directory should remain within the root filesystem"
+msgstr "ãÅÊ ËÁÔÁÌÏÇ ÍÁ¤ ÚÎÁÈÏÄÉÔÉÓØ ÎÁ ËÏÒÅÎÅ×¦Ê ÆÁÊÌÏ×¦Ê ÓÉÓÔÅͦ"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
+msgid "CapsLock key"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
+msgid "Install bootloader"
+msgstr "âÌÏË ÚÁ×ÁÎÔÁÖÅÎÎÑ"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "÷ÉÂÅÒ¦ÔØ ÒÏÚÍ¦Ò ÐÁÍ'ÑÔ¦ ÷ÁÛϧ ÇÒÁƦÞÎϧ ÐÌÁÔÉ"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
+msgid "Dynamic IP Address Pool:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "LVM name?"
+msgstr "îÁÚ×Á LVM?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "úÎÁÊÄÅΦ ¦ÎÔÅÒÆÅÊÓÉ %s %s"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
+msgid "sticky-bit"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Install"
+msgstr "õÓÔÁÎÏ×ËÁ"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The internal domain name"
+msgstr "îÏ×Á ÎÁÚ×Á ÐÒÉÎÔÅÒÁ"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
+msgid "Card IRQ"
+msgstr "ðÅÒÅÐÉÎ ËÁÒÔËÉ"
#: ../../security/help.pm:1
#, c-format
msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+"Arguments: (umask)\n"
+"\n"
+"Set the user umask."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
+msgid ""
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "if set to yes, report unowned files."
+msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr ""
+"÷ÉÂÅÒ¦ÔØ ÐÒÉ×¦Ä ÄÉÓËÅÔÉ, ÑËÉÊ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÄÌÑ ÓÔ×ÏÒÅÎÎÑ\n"
+"Á×ÁÒ¦ÊÎϧ ÄÉÓËÅÔÉ"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
+msgid "LILO with text menu"
+msgstr "LILO Ú ÔÅËÓÔÏ×ÉÍ ÍÅÎÀ"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+msgid "Everything (no firewall)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
+msgid "You must specify a kernel image"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+msgid ", multi-function device on USB"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
+#, fuzzy, c-format
+msgid "Do"
+msgstr "úÁ˦ÎÞÅÎÏ"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "ú×'ÑÚÕÀÓØ Ú ÓÅÒ×ÅÒÏÍ ÝÏ ÐÒÏÞÉÔÁÔÉ ÓÐÉÓÏË ÎÁÑ×ÎÉÈ ÐÁËÅÔ¦×"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
+msgid "Lithuanian AZERTY (old)"
+msgstr "ìÉÔÏ×ÓØËÁ AZERTY (ÓÔÁÒÁ)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "âÒÁڦ̦ÊÓØËÁ (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
+msgid "IP address of host/network:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System installation"
+msgstr "õÓÔÁÎÏ×ËÁ SILO"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
+msgid "Saint Vincent and the Grenadines"
+msgstr "ó×. ÷¦ÎÓÅÎÔ ¦ çÒÅÎÁĦÎÚ"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
+msgid "/File/_Open"
+msgstr "/æÁÊÌ/_÷¦ÄËÒÉÔÉ"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
-"Enable/Disable the logging of IPv4 strange packets."
+"The argument specifies if clients are authorized to connect\n"
+"to the X server on the tcp port 6000 or not."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Location of auto_install.cfg file"
+msgstr "óÔ×ÏÒÅÎÎÑ Á×ÔÏÕÓÔÁÎÏ×ÏÞÎϧ ÄÉÓËÅÔÉ"
+
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
+msgid "Open Firmware Delay"
+msgstr "úÁÔÒÉÍËÁ Open Firmware"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
+msgid "Hungary"
+msgstr "õÇÏÒÝÉÎÁ"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Total progess"
+msgstr "ôÅÓÔÕÀ ÓÔÏÒ¦ÎËÉ"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Color configuration"
+msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ¦ÎÔÅÒÎÅÔÕ"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
+msgid "New Zealand"
+msgstr "îÏ×Á úÅÌÁÎĦÑ"
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "please choose the date to restore"
+msgstr "ñËÉÊ ÔÉÐ ÍÉÛ¦ ×É ÍÁ¤ÔÅ?"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
+msgid "Switching from ext2 to ext3"
+msgstr "ðÅÒÅÍÉËÁÀÓØ Ú ext2 ÎÁ ext3"
-#: ../../security/help.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
+msgid "LPRng"
+msgstr "LPRng"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
+msgid "Netherlands Antilles"
+msgstr "çÏÌÁÎÄÓØ˦ áÎÔÉÌØÓØ˦ ÏÓÔÒÏ×É"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"The argument specifies if clients are authorized to connect\n"
-"to the X server on the tcp port 6000 or not."
+msgid "Browse to new restore repository."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and %d unknown printers"
+msgstr "äÏÄÁÔÉ ÐÒÉÎÔÅÒ"
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "îÅ ÚÎÁÊÄÅÎÏ ÐÌÁÔÉ ISDN PCI. ÷ÉÂÅÒ¦ÔØ ÏÄÎÕ ¦Ú ÐÌÁÔ Õ ÎÁÓÔÕÐÎÏÍÕ ×¦ËΦ."
-#: ../../security/help.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
+msgid "GB"
+msgstr "½Â"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
+msgid "Please give a user name"
+msgstr "äÁÊÔÅ, ÂÕÄØ-ÌÁÓËÁ, ¦Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
+msgid "Enable CD Boot?"
+msgstr "äÏÚ×ÏÌÉÔÉ ÚÁ×ÁÎÔÁÖÅÎÎÑ Ú ËÏÍÐÁËÔ-ÄÉÓËÕ?"
-#: ../../security/help.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+msgid " enter `void' for void entry"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
+msgid "on Hard Drive"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Winmodem connection"
+msgstr "ú×ÉÞÁÊÎÅ Ú'¤ÄÎÁÎÎÑ ÐÏ ÍÏÄÅÍÕ"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
"\n"
-" Accept/Refuse broadcasted icmp echo."
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
#: ../../security/help.pm:1
@@ -12540,759 +12067,549 @@ msgstr ""
msgid ""
"Arguments: (arg)\n"
"\n"
-"Accept/Refuse bogus IPv4 error messages."
+"Set the password history length to prevent password reuse."
msgstr ""
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Security Administrator (login or email)"
+msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr ""
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
+msgid "Not enough swap space to fulfill installation, please add some"
msgstr ""
+"îÅ ×ÉÓÔÁÞÁ¤ Ó×ÏÐ-ÐÁÍ'ÑÔ¦ ÝÏ ÚÁ˦ÎÞÉÔÉ ÕÓÔÁÎÏ×ËÕ. ú¦ÌØÛ¦ÔØ\n"
+"§§. ÂÕÄØ-ÌÁÓËÁ."
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Use libsafe for servers"
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁÒÁÍÅÔÒÉ ÄÌÑ ÓÅÒ×ÅÒÁ"
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Security level"
-msgstr "÷ÓÔÁÎÏ×ÌÅÎÎÑ Ò¦×ÎÑ ÂÅÚÐÅËÉ"
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Please choose the desired security level"
-msgstr "÷ÉÂÅÒ¦ÔØ Ò¦×ÅÎØ ÚÁÈÉÓÔÕ"
-
-#: ../../security/level.pm:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "DrakSec Basic Options"
-msgstr "ðÁÒÁÍÅÔÒÉ"
+msgid "%s on %s"
+msgstr "ðÏÒÔ"
-#: ../../security/level.pm:1
-#, fuzzy, c-format
+#: ../../help.pm:1
+#, c-format
msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
msgstr ""
-"íÉ ×ÍÉËÁ¤ÍÏ 4 Ò¦×ÅÎØ ÂÅÚÐÅËÉ, ÁÌÅ ÔÅÐÅÒ ÓÉÓÔÅÍÁ ¤ ÐÏ×ΦÓÔÀ ÚÁËÒÉÔÏÀ.\n"
-"÷Ó¦ ÒÅÖÉÍÉ ÂÅÚÐÅËÉ ÔÅÐÅÒ ÎÁ ÎÁÊ×ÉÝÏÍÕ Ò¦×Φ."
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"îÁ ÃØÏÍÕ Ò¦×Φ ÂÅÚÐÅËÉ ÓÉÓÔÅÍÕ ÍÏÖÎÁ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ × ÑËÏÓÔ¦ ÓÅÒ×ÅÒÁ.\n"
-"ò¦×ÅÎØ ÂÅÚÐÅËÉ ÄÌÑ Ã¦¤§ ÓÉÓÔÅÍÉ ÔÅÐÅÒ ÄÏÓÔÁÔÎ¦Ê ÄÌÑ ÔÏÇÏ, ÝÏÂ\n"
-"×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ §§ ÑË ÓÅÒ×ÅÒ, ÝÏ ÄÏÐÕÓËÁ¤ ЦÄ'¤ÄÎÁÎÎÑ ÄÏ ÎØÏÇÏ\n"
-"ÂÁÇÁÔØÏÈ Ë̦¤ÎÔ¦×."
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Which is your timezone?"
+msgstr "÷ ÑË¦Ê ÞÁÓÏ×¦Ê ÓÍÕÚ¦ ÷É ÚÎÁÈÏÄÉÔÅÓØ?"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
+msgid "Guinea"
+msgstr "½×¦ÎÅÑ"
-#: ../../security/level.pm:1
+#: ../../network/tools.pm:1
#, fuzzy, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"ãÅ - ÓÔÁÎÄÁÒÔÎÉÊ Ò¦×ÅÎØ ÂÅÚÐÅËÉ, ÑËÉÊ ÒÅËÏÍÅÎÄÕ¤ÔØÓÑ ÍÁÔÉ ÎÁ\n"
-"ËÏÍÐ'ÀÔÅÒ¦, ЦÄËÌÀÞÅÎÏÍÕ ÄÏ ¦ÎÔÅÒÎÅÔÕ × ÑËÏÓÔ¦ Ë̦¤ÎÔÁ. ðÅÒÅצÒËÉ\n"
-"ÂÅÚÐÅËÉ ÔÅÐÅÒ ×ÍÉËÎÅΦ."
+msgid "The system is now connected to the Internet."
+msgstr "óÉÓÔÅÍÁ Ú'¤ÄÎÁÎÁ Ú ¦ÎÔÅÒÎÅÔÏÍ."
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "ð¦×ÄÅÎÁ äÖÏÒÄÖ¦Ñ ¦ ð¦×ÄÅΦ óÁÎÄצÞÓØ˦ ÏÓÔÒÏ×É"
+
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+msgid "Japan (broadcast)"
msgstr ""
-"ðÁÒÏ̦ ÔÅÐÅÒ ×ÍÉËÎÅΦ, ÁÌÅ ×ÓÅ ÏÄÎÏ ÎÅ ÒÅËÏÍÅÎÄÕ¤ÔØÓÑ ËÏÒÉÓÔÕ×ÁÔÉÓÑ\n"
-"ÃÉÍ ËÏÍÐ'ÀÔÅÒÏÍ × ÍÅÒÅÖ¦."
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"ãÅÊ Ò¦×ÅÎØ ÐÏÔÒ¦ÂÎÏ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ Ú ÏÂÅÒÅÖΦÓÔÀ. ÷¦Î ÄÏÚ×ÏÌѤ ¦ÌØÛ\n"
-"ÐÒÏÓÔÅ ËÏÒÉÓÔÕ×ÁÎÎÑ ÷ÁÛÏÀ ÓÉÓÔÅÍÏÀ, ÁÌÅ ¤ ÎÁÄÚ×ÉÞÁÊÎÏ ÎÅÎÁĦÊÎÉÍ. îÅ\n"
-"ÍÏÖÎÁ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÔÁËÏÀ ÓÉÓÔÅÍÏÀ, ËÏÌÉ ×ÏÎÁ ЦÄ'¤ÄÎÁÎÁ ÍÅÒÅÖÅÀ ÄÏ\n"
-"¦ÎÛÉÈ ÓÉÓÔÅÍ, ÁÂÏ ÄÏ ¦ÎÔÅÒÎÅÔÕ. ðÁÒÏ̦ ÎÅ ×ÉËÏÒÉÓÔÏ×ÕÀÔØÓÑ × Ã¦Ê\n"
-"ÓÉÓÔÅͦ."
+msgid "Mozambique"
+msgstr "íÏÚÁͦË"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "ðÁÒÁÎϦÄÁÌØÎÉÊ"
+msgid "Icon"
+msgstr "ð¦ËÔÏÇÒÁÍÁ"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Higher"
-msgstr "÷ÉÓÏËÉÊ"
+msgid "Please choose what you want to backup"
+msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
-#: ../../security/level.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "High"
-msgstr "÷ÉÓÏËÉÊ"
+msgid "256 colors (8 bits)"
+msgstr "265 ËÏÌØÏÒ¦× (8 ¦Ô)"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Poor"
-msgstr "äÕÖÅ ÎÉÚØËÉÊ"
+msgid "Read-write"
+msgstr "úÁÐÉÓ/ÞÉÔÁÎÎÑ"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "úÌÏÍÝÉËÉ! ìÁÓËÁ×Ï ÐÒÏÓÉÍÏ!"
+msgid "Size: %s\n"
+msgstr "òÏÚͦÒ: %s\n"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "úÁÒŤÓÔÒÕÊÔÅÓÑ, ÂÕÄØ-ÌÁÓËÁ, ÝÅ ÒÁÚ Õ %s ÝÏ ÐÒÉ×ÅÓÔÉ Õ Ä¦À ÚͦÎÉ"
+msgid "Hostname: "
+msgstr "¶Í'Ñ ÈÏÓÔÁ:"
-#: ../../standalone/XFdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-"âÕÄØ-ÌÁÓËÁ, ×ÉÊĦÔØ ¦Ú ÓÉÓÔÅÍÉ ¦ ÐÏÔ¦Í ÓËÏÒÉÓÔÕÊÔÅÓÑ Ctrl-Alt-BackSpace"
+msgid "Chunk size %s\n"
+msgstr "òÏÚÍ¦Ò Ä¦ÌÑÎËÉ %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid "Build the future of Linux!"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local Printer"
+msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
+msgid ""
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "No floppy drive available!"
-msgstr "îÅÍÁ¤ ÐÒÉ×ÏÄÁ ÄÉÓËÅÔÉ"
-
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Floppy can be removed now"
-msgstr ""
+msgid "ADSL connection"
+msgstr "ú'¤ÄÎÁÎÎÑ ADSL"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Couldn't access the floppy!"
+msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Please insert floppy disk:"
-msgstr "÷ÓÔÁ×ÔÅ ÓÉÓÔÅÍÎÕ ÄÉÓËÅÔÕ, ÑËÁ ×ÖÉ×ÁÌÁÓÑ × ÄÉÓËÏ×ÏĦ %s"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Write Config"
-msgstr "ÐÅÒÅÎÁÓÔÒϧÔÉ"
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr ""
+msgid "Error!"
+msgstr "ðÏÍÉÌËÁ!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Server Configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦"
+msgid "cable connection detected"
+msgstr "úÎÁÊÄÅÎÏ ËÁÂÅÌØÎÅ Ú'¤ÄÎÁÎÎÑ"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP Range End:"
+msgid "Permission denied transferring %s to %s"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "IP Range Start:"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "óÅÒ×ÅÒ NIS"
+msgid "/_Report Bug"
+msgstr "/_R ðÏצÄÏÍÉÔÉ ÐÒÏ ÐÏÍÉÌËÕ"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "îÁÚ×Á ÄÏÍÅÎÕ"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resize"
+msgstr "úͦÎÉÔÉ ÒÏÚͦÒ"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr ""
+msgid "Dominica"
+msgstr "äÏͦΦËÁ"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Subnet Mask:"
+msgid "Please enter the device name to use for backup"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Routers:"
-msgstr ""
+msgid "Resolution: %s\n"
+msgstr "òÏÚĦÌØÎÁ ÚÄÁÔΦÓÔØ: %s\n"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Netmask:"
-msgstr "íÁÓËÁ ÍÅÒÅÖ¦"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "matching"
+msgstr "צÄÐÏצÄÁ¤"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "Subnet:"
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
+"âÕÄØ-ÌÁÓËÁ, ×ÉÂÅÒ¦ÔØ ×¦ÒÎÉÊ ÐÏÒÔ. îÁÐÒÉËÌÁÄ, ÐÏÒÔ Ð¦Ä ÎÁÚ×ÏÀ COM1 Õ MS\n"
+"Windows ÎÏÓÉÔØ ÎÁÚ×Õ ttyS0 Õ GNU/ì¦ÎÁËÓ¦."
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Config..."
-msgstr "ëÏÎƦÇÕÒÁæÑ..."
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "ë̦¤ÎÔ DHCP"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "The following packages are going to be removed"
+msgstr "㦠ÐÁËÅÔÉ ÂÕÄÕÔØ ÄŦÎÓÔÁÌØÏ×ÁÎÉÍÉ"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "<-- Edit Client"
-msgstr "ë̦¤ÎÔ DHCP"
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#, c-format
+msgid "Connect to the Internet"
+msgstr "ú'¤ÄÎÁÔÉÓÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Add Client -->"
-msgstr ""
+msgid "Use existing partitions"
+msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ ¦ÓÎÕÀÞÉÍ Ð¦ÄÒÏÚĦÌÏÍ"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Allow Thin Clients"
-msgstr "ë̦¤ÎÔ DHCP"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Canadian (Quebec)"
+msgstr "ëÁÎÁÄÓØËÁ (ë×ÅÂÅË)"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Thin Client"
-msgstr "ë̦¤ÎÔ DHCP"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Mouse device: %s\n"
+msgstr "óÐÅæÁÌØÎÉÊ ÐÒÉÓÔÒ¦Ê ÍÉÛ¦: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "No net boot images created!"
+msgid "Reselect correct fonts"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "type: %s"
-msgstr "ôÉÐ: "
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<-- Del User"
+msgid ""
+"Options Description:\n"
+"\n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Add User -->"
-msgstr "äÏÄÁÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"ð¦ÓÌÑ ÃØÏÇÏ ÷ÁÍ ÂÕÄÅ ÚÁÄÁÎÅ ÚÁÐÉÔÁÎÎÑ, ÞÉ ÈÏÔ¦ÌÉ Â ÷É, ÝÏ ÇÒÁƦÞÎÉÊ\n"
+"¦ÎÔÅÒÆÅÊÓ ×ÍÉËÁ×ÓÑ Á×ÔÏÍÁÔÉÞÎÏ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ. úÁÕ×ÁÖÔÅ, ÝÏ\n"
+"ÃÅ ÚÁÐÉÔÁÎÎÑ ÂÕÄÅ ÚÁÄÁÎÅ ÎÁצÔØ ÑËÝÏ ÷É ×¦ÄÍÏ×ÉÔÅÓØ ×¦Ä ×ÉÐÒÏÂÏ×Õ×ÁÎÎÑ\n"
+"ËÏÎƦ­ÕÒÁæ§. ú×ÉÞÁÊÎÏ Ö, ÑËÝÏ ÷ÁÛÁ ÍÁÛÉÎÁ ÂÕÄÅ ÐÒÁÃÀ×ÁÔÉ ÓÅÒ×ÅÒÏÍ,\n"
+"ÁÂÏ ÑËÝÏ ÷É ÎÅ ÚÍÏÇÌÉ ×¦ÒÎÏ ÎÁÓÔÒϧÔÉ X, ÔÕÔ ËÒÁÝŠצÄÐÏצÓÔÉ \"î¦\"."
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete All NBIs"
-msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "We are now going to configure the %s connection."
+msgstr "úÁÒÁÚ ÂÕÄÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ Ú'¤ÄÎÁÎÎÑ %s."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, fuzzy, c-format
-msgid "<-- Delete"
-msgstr "óÔÅÒÔÉ"
+msgid "MandrakeExpert Corporate"
+msgstr "ÅËÓÐÅÒÔ"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "This will take a few minutes."
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Build All Kernels -->"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "îÅÍÁ¤ Ú'¤ÄÎÁÎÎÑ"
+msgid "You've not selected any font"
+msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
-#: ../../standalone/drakTermServ:1
+#: ../../steps.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr ""
+msgid "Language"
+msgstr "÷ÉÂÅÒ¦ÔØ ÍÏ×Õ"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr ""
+msgid "Printer model selection"
+msgstr "÷ÉÂ¦Ò ÍÏÄÅ̦ ÐÒÉÎÔÅÒÁ"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
+"ð¦ÓÌÑ ÚͦÎÉ ÔÉÐÕ Ð¦ÄÒÏÚĦÌÕ ÄÉÓËÕ %s, ×Ó¦ ÄÁΦ ÎÁ ÃØÏÍÕ Ð¦ÄÒÏÚĦ̦ \n"
+"ÂÕÄÕÔØ ×ÔÒÁÞÅΦ"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr ""
+msgid "%d seconds"
+msgstr "%d ÓÅËÕÎÄ"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Boot Floppy"
-msgstr ""
+msgid "Insert a blank floppy in drive %s"
+msgstr "÷ÓÔÁ×ÔÅ ÞÉÓÔÕ ÄÉÓËÅÔÕ × ÄÉÓËÏ×¦Ä %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
-msgstr ""
+msgid "A valid URI must be entered!"
+msgstr "ðÏÔÒ¦ÂÎÏ ××ÅÓÔÉ ËÏÒÅËÔÎÉÊ URI!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+msgid "Found \"%s\" interface do you want to use it ?"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+msgid "Re-configure interface and DHCP server"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../harddrake/sound.pm:1
#, fuzzy, c-format
-msgid "Add/Del Clients"
-msgstr "ë̦¤ÎÔ DHCP"
+msgid "Sound configuration"
+msgstr "ëÏÎƦ­ÕÒÁæÑ"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Add/Del Users"
-msgstr "äÏÄÁÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Photo test page"
+msgstr "ôÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ ÆÏÔÏÇÒÁƦÞÎϧ ÑËÏÓÔ¦"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr ""
+msgid "Custom disk partitioning"
+msgstr "óÐÅæÁÌØÎÉÊ ÒÏÚÐÏÄ¦Ì ÄÉÓËÕ"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
+msgid "Enter Printer Name and Comments"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Stop Server"
-msgstr "óÅÒ×ÅÒ NIS"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Start Server"
-msgstr "óÅÒ×ÅÒ NIS"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Disable Server"
-msgstr "âÁÚÁ ÄÁÎÉÈ"
-
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Enable Server"
-msgstr "âÁÚÁ ÄÁÎÉÈ"
+msgid ""
+"The following printers\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦!"
#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "ðÅÒÅÎ¦Ó ËÏÎƦÇÕÒÁæ§ ÐÒÉÎÔÅÒ¦× "
+msgid "type: %s"
+msgstr "ôÉÐ: "
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Remove the last item"
-msgstr "óÔÅÒÔÉÆÁÊÌÕ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ?"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTY)"
+msgstr "óÌÏ×ÁÃØËÁ (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, fuzzy, c-format
-msgid "Add an item"
-msgstr "äÏÄÁÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
+msgid "No Sound Card detected!"
+msgstr "îÅÍÁ¤ Ú'¤ÄÎÁÎÎÑ"
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Auto Install"
-msgstr "õÓÔÁÎÏ×ËÁ"
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#, c-format
+msgid "Mouse Port"
+msgstr "ðÏÒÔ ÍÉÛ¦"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-"äÉÓËÅÔÁ ÓÔ×ÏÒÅÎÁ ÕÓЦÛÎÏ.\n"
-"÷É ÍÏÖÅÔÅ ÐÏ×ÔÏÒÉÔÉ ÕÓÔÁÎÏ×ËÕ."
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "Congratulations!"
-msgstr "÷¦ÔÁÎÎÑ!"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Ftp Server"
+msgstr "óÅÒ×ÅÒ NIS"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"Enable/Disable msec hourly security check."
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "%s fonts conversion"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Creating auto install floppy"
-msgstr "óÔ×ÏÒÅÎÎÑ Á×ÔÏÕÓÔÁÎÏ×ÏÞÎϧ ÄÉÓËÅÔÉ"
+msgid "the type of bus on which the mouse is connected"
+msgstr "÷ÉÂÅÒ¦ÔØ ÄÏ ÑËÏÇÏ ÐÏÓ̦ÄÏ×ÎÏÇÏ ÐÏÒÔÕ ÐÒɤÄÎÁÎÏ ÍÉÛÕ?"
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "manual"
-msgstr ""
+msgid "Uganda"
+msgstr "õÇÁÎÄÁ"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+"Arguments: (size)\n"
+"\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-"äÌÑ ËÏÖÎÏÇÏ ËÒÏËÕ, ÂÕÄØ ÌÁÓËÁ, ×ËÁÖ¦ÔØ ÞÉ ÐÒÉ ÐÏ×ÔÏÒÎ¦Ê ÕÓÔÁÎÏ×æ ÃÅÊ\n"
-"ËÒÏË ×ÉËÏÎÁ¤ÔØÓÑ Á×ÔÏÍÁÔÉÞÎÏ, ÞÉ ×ÒÕÞÎÕ."
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ËÒÏË¦× ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "replay"
-msgstr "ðÏ×ÔÏÒÉÔÉ"
-
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"Do you want to continue?"
-msgstr ""
-"÷É ÍÏÖÅÔÅ ÚÁÒÁÚ ÎÁÓÔÒϧÔÉ ÄÉÓËÅÔÕ ÄÌÑ Á×ÔÏÍÁÔÉÚÏ×ÁÎϧ ÕÓÔÁÎÏËÉ. ãÅÊ\n"
-"ÒÅÖÉÍ ÕÓÔÁÎÏ×ËÉ ÄÅÝÏ ÎÅÂÅÚÐÅÞÎÉÊ ¦ ÎÉÍ ÔÒÅÂÁ ËÏÒÉÓÔÕ×ÁÔÉÓÑ\n"
-"ÐÏͦÒËÏ×ÁÎÏ.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-"ëÏÒÉÓÔÕÀÞÉÓØ ÃÉÍ ÒÅÖÉÍÏÍ ÷É ÍÏÖÅÔÅ ÐÏ×ÔÏÒÉÔÉ ÕÓÔÁÎÏ×ËÕ, ÝÏ ÷É\n"
-"Ô¦ÌØËÉ-ÝÏ ×ÉËÏÎÁÌÉ ÎÁ ÄÁÎ¦Ê ÓÉÓÔÅͦ. îÁ ÄÅÑËÉÈ ÅÔÁÐÁÈ ÷ÁÍ ÂÕÄÕÔØ\n"
-"ÚÁÄÁΦ ÚÁÐÉÔÁÎÎÑ, ÝÏ ÚͦÎÉÔÉ ÚÎÁÞÅÎÎÑ Ë¦ÌØËÏÈ ÚͦÎÎÉÈ.\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-"äÌÑ ÷ÁÛϧ ÂÅÚÐÅËÉ, ÐÏÄ¦Ì ÄÉÓËÕ ÎÁ ЦÄÒÏÚĦÌÉ ¦ ÆÏÒÍÁÔÕ×ÁÎÎÑ Î¦ËÏÌÉ ÎÅ\n"
-"ÂÕÄÅ ×ÉËÏÎÕ×ÁÔÉÓØ Á×ÔÏÍÁÔÉÞÎÏ ÎÅÚÁÌÅÖÎÏ ×¦Ä ÔÏÇÏ, ÝÏ ×ÉÂÒÁÎÏ ÐÒÉ\n"
-"ÕÓÔÁÎÏ×æ.\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-"èÏÞÅÔÅ ÐÒÏÄÏ×ÖÕ×ÁÔÉ? "
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ Á×ÔÏÍÁÔÉÞÎϧ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "îÅ ÍÏÖÕ ÚÎÁÊÔÉ ÐÏÔÒ¦ÂÎÉÊ ÆÁÊÌ ¦Ú ÚÏÂÒÁÖÅÎÎÑÍ `%s'"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Error!"
-msgstr "ðÏÍÉÌËÁ!"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
-"Restore Backup Problems:\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
+"\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "ëÏÍÏÒÓØ˦ ÏÓÔÒÏ×É"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Description:\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+"We are now going to configure the %s connection.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"Press OK to continue."
+msgstr ""
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
"\n"
"\n"
-msgstr ""
+"úÁÒÁÚ ÂÕÄÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ Ú'¤ÄÎÁÎÎÑ %s.\n"
+"\n"
+"\n"
+"îÁÔÉÓΦÔØ \"çÁÒÁÚÄ\" ÄÌÑ ÐÒÏÄÏ×ÄÖÅÎÎÑ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgid "Yaboot mode"
+msgstr "òÅÖÉÍ Yaboot"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "ú×ÉÞÁÊÎÁ 3È ËÎÏÐÏÞÎÁ ÍÉÛËÁ"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select another media to restore from"
+msgstr "ñËÉÊ ÔÉÐ ÍÉÛ¦ ×É ÍÁ¤ÔÅ?"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Software Manager"
+msgstr "îÁÚ×Á ÒÅÓÕÒÓÕ"
+
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -13304,4620 +12621,5341 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
+" - Differential Backups:\n"
" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
+msgid "Re-submit"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr ""
+msgid "KB"
+msgstr "ËÂ"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Restore"
-msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÆÁÊÌÕ"
+msgid "Network & Internet"
+msgstr "¶ÎÔÅÒÆÅÊÓ ÍÅÒÅÖ¦"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now"
-msgstr "õÓÔÁÎÏ×ËÁ ÆÁÊÌ. ÓÉÓÔÅÍ"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "ìÉÔÏ×ÓØËÁ \"ÆÏÎÅÔÉÞÎÁ\" QWERTY"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Advanced Configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Net Boot Images"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Wizard Configuration"
-msgstr "ëÏÎƦ­ÕÒÁæÑ"
+msgid "Sharing of local scanners"
+msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "View Backup Configuration."
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now from configuration file"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
+#: ../../services.pm:1
+#, c-format
+msgid "Services and deamons"
+msgstr "óÅÒצÓÉ ÔÁ ÄÅÍÏÎÉ"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Drakbackup Configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Remote host name missing!"
+msgstr "îÅÍÁ¤ ÎÁÚ×É ×¦ÄÄÁÌÅÎÏÇÏ ÈÏÓÔÁ!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
+msgid "with /usr"
msgstr ""
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Sending files..."
-msgstr "úÁÐÉÓÁÔÉ × ÆÁÊÌ"
+msgid "Network"
+msgstr "íÅÒÅÖÁ:"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup other files"
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
+#: ../../any.pm:1
+#, c-format
+msgid "This password is too simple"
+msgstr "ðÁÒÏÌØ ÚÁÎÁÄÔÏ ÐÒÏÓÔÉÊ"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTZ)"
+msgstr "óÌÏ×ÁÃØËÁ (QWERTZ)"
+
+#: ../../share/advertising/06-development.pl:1
+#, c-format
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Truly minimal install (especially no urpmi)"
+msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Backup user files"
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
+msgid ""
+" Transfer \n"
+"Now"
+msgstr "ðÅÒÅÎÅÓÔÉ"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Backup system files"
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
+msgid "Use daemon"
+msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Under Devel ... please wait."
+msgid "Authentication"
+msgstr "á×ÔÅÎÔÉËÁæÑ"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Additional CUPS servers: "
+msgstr "IP ÁÄÒÅÓÁ CUPS ÓÅÒ×ÅÒÁ"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Please select data to backup..."
-msgstr "÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÍÏ×Õ."
+msgid "Where do you want to mount %s?"
+msgstr "äÅ ×É ÈÏÞÅÔÅ ÚÍÏÎÔÕ×ÁÔÉ ÐÒÉÓÔÒ¦Ê %s?"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please select media for backup..."
-msgstr "÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÍÏ×Õ."
+msgid "Restore Via Network"
+msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÆÁÊÌÕ"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please select data to restore..."
-msgstr "÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÍÏ×Õ."
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "áÌÇÅÒ¦Ñ"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "㦠ÐÁËÅÔÉ ÂÕÄÕÔØ ×ÓÔÁÎÏ×ÌÅÎÉÍÉ"
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "òÏÚÍ¦Ò Initrd"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+msgid "\tBackups use tar and gzip\n"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Next"
-msgstr "ôÅËÓÔ"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "2 MB"
+msgstr "2 íÂ"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Previous"
-msgstr "<- ðÏÐÅÒÅÄΦÊ"
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Save"
-msgstr "óÔÁÔÕÓ"
+msgid "Setting Default Printer..."
+msgstr "óÔÁÎÄÁÒÔÎÉÊ ÐÒÉÎÔÅÒ"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Build Backup"
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Interface %s (using module %s)"
+msgstr "¶ÎÔÅÒÆÅÊÓ %s (Ú ×ÉËÏÒÉÓÔÁÎÎÑÍ ÍÏÄÕÌÑ %s)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Progress"
-msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÆÁÊÌÕ"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Name: %s\n"
+msgstr "îÁÚ×Á: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Restore From Catalog"
-msgstr "÷¦ÄÎÏ×ÉÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×"
+msgid "Generating preview ..."
+msgstr "÷ÉÚÎÁÞÁÀ ÐÒÉÓÔÒϧ..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Browse to new restore repository."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "CD in place - continue."
+msgid "serial"
+msgstr "ÐÏÓ̦ÄÏ×ÎÉÊ"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "DVD-ROM"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Custom Restore"
-msgstr "óÐÅæÁÌØÎÉÊ"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Georgian (\"Latin\" layout)"
+msgstr "çÒÕÚÉÎÓØËÁ (ÌÁÔÉÎÓØËÁ ÒÏÚËÌÁÄËÁ)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Restore all backups"
+msgid "Get the best items with Mandrake Linux Strategic partners"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Failed..."
-msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÆÁÊÌÕ"
-
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Files Restored..."
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Path or Module required"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Kenya"
+msgstr "ëÅΦÑ"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``Unmount'' first"
+msgstr "óÐÏÞÁÔËÕ ÓËÏÒÉÓÔÕÊÔÅÓÑ ``òÏÚÍÏÎÔÕ×ÁÔÉ''"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Hostname required"
-msgstr "¶Í'Ñ ÈÏÓÔÁ:"
+msgid "Installing mtools packages..."
+msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÕ %s"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Username required"
-msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
+msgid "You must specify a root partition"
+msgstr "÷É ÐÏ×ÉÎΦ ÍÁÔÉ Ð¦ÄÒÏÚÄ¦Ì ÄÌÑ Ó×ÏÐ "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Password required"
-msgstr "ðÁÒÏÌØ"
+msgid "first step creation"
+msgstr "ÓÔ×ÏÒÅÎÎÑ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÏÇÏ ÄÉÓËÕ"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Host Path or Module"
+msgid "Both Shift keys simultaneously"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Host Name"
-msgstr "îÁÚ×Á ÈÏÓÔÁ"
+msgid "Select a scanner model"
+msgstr "÷ÉÂÅÒ¦ÔØ ÇÒÁƦÞÎÕ ÐÌÁÔÕ"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr ""
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR New Generation (ÎÏ×Å ÐÏËÏ̦ÎÎÑ)"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Restore Via Network"
-msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÆÁÊÌÕ"
+msgid "Drakbackup Configuration"
+msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
+msgid "Save as.."
+msgstr "úÂÅÒÅÇÔÉ ÑË.."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore From Tape"
-msgstr "÷¦ÄÎÏ×ÉÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×"
-
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
+msgid "Korea (North)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
+msgid "Autologin"
+msgstr "á×ÔÏÒŤÓÔÒÁæÑ"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, fuzzy, c-format
-msgid "Restore From CD"
-msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÄÉÓËÅÔÉ"
+msgid "System configuration"
+msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ¦ÎÔÅÒÎÅÔÕ"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Backup files not found at %s."
+msgid "Domain Admin Password"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../share/advertising/05-desktop.pl:1
+#, c-format
msgid ""
-"Change\n"
-"Restore Path"
-msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÆÁÊÌÕ"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
+msgid "Configuring printer ..."
+msgstr "îÁÓÔÒÏÀÀ ÐÒÉÎÔÅÒ \"%s\"..."
-#: ../../standalone/drakbackup:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr ""
+msgid "MB"
+msgstr "íÂ"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "if set to yes, run some checks against the rpm database."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "select path to restore (instead of /)"
-msgstr "ñËÉÊ ÔÉÐ ÍÉÛ¦ ×É ÍÁ¤ÔÅ?"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Other"
-msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÆÁÊÌÕ"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Users"
-msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÆÁÊÌÕ"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore system"
-msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Other Media"
-msgstr "¶ÎÛ¦"
+#: ../../lang.pm:1
+#, c-format
+msgid "Virgin Islands (British)"
+msgstr "÷¦ÒǦÎÓØ˦ ÏÓÔÒÏ×É (âÒÉÔÁΦÑ)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Select another media to restore from"
-msgstr "ñËÉÊ ÔÉÐ ÍÉÛ¦ ×É ÍÁ¤ÔÅ?"
+#: ../../lang.pm:1
+#, c-format
+msgid "Bermuda"
+msgstr "âÅÒÍÕÄÉ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please enter the directory where backups are stored"
+msgid "click here if you are sure."
msgstr ""
#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore from Hard Disk."
-msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÄÉÓËÅÔÉ"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use quota for backup files."
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-
-#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
+"No configuration file found \n"
+"please click Wizard or Advanced."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save:"
-msgstr "÷ÉÐÒÏÂÕÊÔÅ ÍÉÛËÕ, ÂÕÄØ-ÌÁÓËÁ"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use Hard Disk to backup"
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "please choose the date to restore"
-msgstr "ñËÉÊ ÔÉÐ ÍÉÛ¦ ×É ÍÁ¤ÔÅ?"
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"÷ÉÝÅ ÐÅÒÅ̦ÞÅΦ ×ÖÅ ¦ÓÎÕÀÞ¦ ЦÄÒÏÚĦÌÉ, ÚÎÁÊÄÅΦ ÎÁ ÷ÁÛÏÍÕ ÖÏÒÓÔËÏÍÕ\n"
+"ÄÉÓËÕ. ÷É ÍÏÖÅÔÅ ÐÒÉÔÒÉÍÕ×ÁÔÉÓØ ËÏÎƦ­ÕÒÁæ§, ×ÓÔÁÎÏ×ÌÅÎϧ\n"
+"ÐÏͦÞÎÉËÏÍ. ãÑ ËÏÎƦ­ÕÒÁÃ¦Ñ Ð¦ÄÈÏÄÉÔØ ÄÌÑ Â¦ÌØÛÏÓÔ¦ ×ÉÐÁÄ˦×\n"
+"×ÉËÏÒÉÓÔÁÎÎÑ ÓÉÓÔÅÍÉ. ñËÝÏ ×É ×ÉÒ¦ÛÉÔÅ ÚͦÎÉÔÉ ÃÀ ËÏÎƦ­ÕÒÁæÀ, ÑË\n"
+"ͦΦÍÕÍ ÷É ÍÁ¤ÔÅ ×ÉÚÎÁÞÉÔÉ ËÏÒÅÎÅ×Õ ÆÁÊÌÏ×Õ ÓÉÓÔÅÍÕ (/). îÅ ×ÉĦÌÑÊÔÅ\n"
+"ÄÌÑ ÃØÏÇÏ ÚÁÎÁÄÔÏ ÍÁÌÉÊ Ð¦ÄÒÏÚĦÌ, ÂÏ ¦ÎÁËÛÅ ×É ÎÅ ÚÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ\n"
+"×ÓÅ ÐÏÔÒ¦ÂÎÅ ÐÒÏÇÒÁÍÎÅ ÚÁÂÅÚÐÅÞÅÎÎÑ. ñËÝÏ ×É ÂÁÖÁ¤ÔÅ ÚÂÅÒÅÇÔÉ ×Ó¦ Ó×ϧ\n"
+"ÄÁΦ ÎÁ ÏËÒÅÍÏÍÕ Ð¦ÄÒÏÚĦ̦, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ ÔÁËÏÖ ×ÉÂÒÁÔÉ Ð¦ÄÒÏÚĦÌ\n"
+"ÄÌÑ \"/home\" (Ô¦ÌØËÉ × ÔÏÍÕ ×ÉÐÁÄËÕ, ÑËÝÏ ×É ÍÁ¤ÔŠ¦ÌØÛÅ ÏÄÎÏÇÏ\n"
+"ЦÄÒÏÚĦÌÁ ÄÌÑ ì¦ÎÁËÓÁ). \n"
+"\n"
+"ëÏÖÅΠЦÄÒÏÚÄ¦Ì ÐÏÄÁÎÉÊ × ÔÁËÏÍÕ ×ÉÇÌÑĦ: \"îÁÚ×Á\", \"ïÂ'¤Í\".\n"
+"\n"
+"îÁÚ×Á ÒÏÚÛÉÆÒÏ×Õ¤ÔØÓÑ ÔÁË: \"ÔÉÐ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ\", \"ÎÏÍÅÒ ÖÏÒÓÔËÏÇÏ\n"
+"ÄÉÓËÕ\", \"ÎÏÍÅÒ Ð¦ÄÒÏÚĦÌÕ ÎÁ ÄÉÓËÕ\", (îÁÐÒÉËÌÁÄ: \"hda1\").\n"
+"\n"
+"\"ôÉÐ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ\" - ÃÅ \"hd\", ÑËÝÏ ×É ÍÁ¤ÔÅ ÄÉÓË ÔÉÐÕ IDE, ¦ \"sd\",\n"
+"ÑËÝÏ ×É ÍÁ¤ÔÅ ÖÏÒÓÔËÉÊ ÄÉÓË ÔÉÐÕ SCSI.\n"
+"\n"
+"\"îÏÍÅÒ ÖÏÒÓËÏÇÏ ÄÉÓËÕ\" - ÃÅ ÚÁ×ÖÄÉ Ì¦ÔÅÒÁ ЦÓÌÑ \"hd\" ÞÉ \"sd\". äÌÑ\n"
+"ÄÉÓË¦× ÔÉÐÕ IDE ÃÅ:\n"
+"\n"
+" * \"a\" - ÇÏÌÏ×ÎÉÊ ÄÉÓË (master) ÎÁ ÐÅÒÛÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
+"\n"
+" * \"b\" - ×ÔÏÒÉÎÎÉÊ (slave) ÄÉÓË ÎÁ ÐÅÒÛÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
+"\n"
+" * \"c\" - ÇÏÌÏ×ÎÉÊ ÄÉÓË ÎÁ ÄÒÕÇÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
+"\n"
+" * \"d\" - ×ÔÏÒÉÎÎÉÊ ÄÉÓË ÎÁ ÄÒÕÇÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE.\n"
+"\n"
+"äÌÑ SCSI ÄÉÓË¦× \"a\" ÏÚÎÁÞÁ¤ \"ÇÏÌÏ×ÎÉÊ ÄÉÓË\", \"b\" - ÄÒÕÇÏÒÑÄÎÉÊ ÄÉÓË, "
+"¦\n"
+"Ô.Ä. ..."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, fuzzy, c-format
-msgid "Backup the system files before:"
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
+msgid "Remove"
+msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
+msgid "Lesotho"
+msgstr "ìÅÓÏÔÏ"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "OK to restore the other files."
+msgid "utopia 25"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " Restore Configuration "
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Pipe job into a command"
+msgstr "ðÅÒÅÎÁÐÒÁ×ÉÔÉ ÒÏÂÏÔÕ ÐÏ ËÁÎÁÌÕ × ËÏÍÁÎÄÕ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Successfuly Restored on %s "
+msgid "new dynamic device name generated by core kernel devfs"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid " All of your selected data have been "
-msgstr ""
+msgid "Yes"
+msgstr "ôÁË"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr ""
+msgid "Cote d'Ivoire"
+msgstr "ëÏÉ Ä'¶×ÕÁÒ"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Which protocol do you want to use?"
+msgstr "ñËÉÊ ÐÒÏÔÏËÏÌ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ?"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "÷ÉÂÅÒ¦ÔØ ÄÏ ÑËÏÇÏ ÐÏÓ̦ÄÏ×ÎÏÇÏ ÐÏÒÔÁ ЦÄËÌÀÞÅÎÉÊ ÷ÁÛ ÍÏÄÅÍ?"
+msgid "Restore Progress"
+msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÆÁÊÌÕ"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
+msgid "Estonia"
+msgstr "åÓÔÏΦÑ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"List of data to restore:\n"
-"\n"
+msgid "Choose the host on which the local scanners should be made available:"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
msgstr ""
+"õ ÷ÁÓ ¤ ÐÒÏͦÖÏË × ÔÁÂÌÉæ ÒÏÚĦ̦×, ÁÌÅ Ñ ÎÅ ÍÏÖÕ ÎÉÍ ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ.\n"
+"´ÄÉÎÉÍ Ò¦ÛÅÎÎÑÍ ÍÏÖÅ ÂÕÔÉ ÐÅÒÅÓÕÎÕÔÉ ÷ÁÛ¦ ÏÓÎÏ×Φ ЦÄÒÏÚĦÌÉ ÔÁË, ÝÏÂ\n"
+"ÐÒÏͦÖÏË ÂÕ× ÐÏÒÕÞ Ú ÒÏÚÛÉÒÅÎÉÍÉ Ð¦ÄÒÏÚĦÌÁÍÉ."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Channel"
+msgstr "÷¦ÄͦÎÉÔÉ"
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr ""
+msgid "Add"
+msgstr "äÏÄÁÔÉ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr ""
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ÓËÏÎƦÇÕÒÏ×ÁÎÏ"
#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " Error while sending mail. \n"
+msgstr "ðÏÍÉÌËÁ ÐÒÉ ÞÉÔÁÎΦ ÆÁÊÌÁ %s"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr ""
+msgid "Keyboard"
+msgstr "ëÌÁצÁÔÕÒÁ"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "\t-Network by FTP.\n"
+msgid ""
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Tape \n"
+msgid ""
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr ""
+msgid "Choose the connection you want to configure"
+msgstr "÷ÉÂÅÒ¦ÔØ Ú'¤ÄÎÁÎÎÑ, ÑËÅ ÷É ÈÏÞÅÔÅ ÎÁÓÔÒϧÔÉ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Please wait, setting security level..."
+msgstr "÷ÓÔÁÎÏ×ÌÅÎÎÑ Ò¦×ÎÑ ÂÅÚÐÅËÉ"
+
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Hard drive.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
+msgid "Configuring network device %s"
+msgstr "ëÏÎƦÇÕÒÕÀ ÐÒÉÓÔÒ¦Ê ÍÅÒÅÖ¦ %s"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "activated"
+msgstr "ÁËÔÉצÚÕ×ÁÔÉ ÚÁÒÁÚ"
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Please choose which network interface will be used for the dhcp server."
msgstr ""
+"÷ÉÂÅÒ¦ÔØ ÑËÕ ÐÌÁÔÕ ÍÅÒÅÖ¦ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÁÔÉ ÄÌÑ Ú'¤ÄÎÁÎÎÑ Ú\n"
+"¶ÎÔÅÒÎÅÔÏÍ"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
+msgid "Finding packages to upgrade..."
+msgstr "ûÕËÁÀ ÐÁËÅÔÉ ÄÌÑ ÐÏÎÏ×ÌÅÎÎÑ"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
+msgid "Mount point: "
+msgstr "ôÏÞËÁ ÍÏÎÔÕ×ÁÎÎÑ: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "\tDo not include System Files\n"
+msgid "parse all fonts"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "ðÁÒÁÍÅÔÒÉ"
+msgid "With X"
+msgstr "þÅËÁÊÔÅ"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
+msgid "Multi-head configuration"
+msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ Ú Ë¦ÌØËÏÍÁ ÍÏΦÔÏÒÁÍÉ"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "No browser available! Please install one"
msgstr ""
+"÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÔÁËÏÖ ¦ÎÛ¦ ÍÏ×É, Ñ˦ ÂÕÄÕÔØ ÄÏÓÔÕÐΦ × ÓÉÓÔÅͦ ЦÓÌÑ\n"
+"ÕÓÔÁÎÏ×ËÉ"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Save via %s on host: %s\n"
+"%s"
msgstr ""
+"úÂÅÒÅÇÔÉ ÚͦÎÉ?\n"
+"¶ÓÎÕÀÞÁ ËÏÎƦÇÕÒÁæÑ:\n"
+"\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr ""
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "ReiserFS ÎÅ ÍÏÖÎÁ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÎÁ ЦÄÒÏÚĦÌÁÈ ÒÏÚͦÒÏÍ ÍÅÎÛÅ 32íÂ."
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save to Tape on device: %s"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
+"ðÒÏÔÏËÏÌ rwho ×ÉÄÁ¤ ËÏÒÉÓÔÕ×ÁÞÁÍ ÎÁ צÄÄÁÌÅÎÉÈ ÓÉÓÔÅÍÁÈ ¦ÎÆÏÒÍÁæÀ ÐÒÏ\n"
+"×Ó¦È ËÏÒÉÓÔÕ×ÁÞ¦× ÚÁÒŤÓÔÒÏ×ÁÎÉÈ × ÓÉÓÔÅͦ, ÑËÁ ÍÁ¤ ÄÅÍÏÎ rwho\n"
+"(ÐÏĦÂÎÉÊ ÄÏ ÄÅÍÏÎÁ finger)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid " (multi-session)"
-msgstr ""
+msgid "Domain name"
+msgstr "îÁÚ×Á ÄÏÍÅÎÕ"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid " on device: %s"
-msgstr "óÐÅæÁÌØÎÉÊ ÐÒÉÓÔÒ¦Ê ÍÉÛ¦: %s\n"
+msgid "Sharing of local printers"
+msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "RW"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Available printers"
+msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
+msgid "Empty"
+msgstr "ðÕÓÔÏ"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
+msgid "text width"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
+msgid "Where do you want to mount device %s?"
+msgstr "äÅ ×É ÈÏÞÅÔÅ ÚÍÏÎÔÕ×ÁÔÉ ÐÒÉÓÔÒ¦Ê %s?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
+msgid "The default lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Interface \"%s\""
+msgstr "¶ÎÔÅÒÆÅÊÓ %s"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
+msgid "With basic documentation (recommended!)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "ïÄÎÏ ËÎÏÐÏÞÎÁ"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Backup Sources: \n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid "Select user manually"
+msgid "Test"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Backup Users"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid direct root login."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Backup system"
-msgstr "õÓÔÁÎÏ×ËÁ ÆÁÊÌ. ÓÉÓÔÅÍ"
+msgid "Korea"
+msgstr "ýÅ"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, fuzzy, c-format
-msgid "Please choose what you want to backup"
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
+msgid "Your choice? (default `%s'%s) "
+msgstr "÷ÁÛ ×ɦÒ? (ÒÅËÏÍÅÎÄÏ×ÁÎÉÊ %s) "
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "on Tape Device"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Raw printer"
+msgstr "îÅÍÁ¤ ÐÒÉÎÔÅÒÁ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "on CDROM"
+msgid "official vendor name of the cpu"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "across Network"
-msgstr "íÅÒÅÖÁ:"
+msgid "Vendor"
+msgstr "îÁÚÁÄ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on Hard Drive"
-msgstr ""
+msgid "Interface %s"
+msgstr "¶ÎÔÅÒÆÅÊÓ %s"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please choose where you want to backup"
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
+#: ../../steps.pm:1
+#, c-format
+msgid "Configure mouse"
+msgstr "óËÏÎƦÇÕÒÕÊÔÅ ÍÉÛÕ"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "More Options"
-msgstr "ïÐæ§ ÍÏÄÕÌÑ:"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the mount points"
+msgstr "÷ÉÂÅÒ¦ÔØ ÔÏÞËÉ ÍÏÎÔÕ×ÁÎÎÑ"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "When"
-msgstr "ëÏ̦ÝÁÔËÏ"
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "OK"
+msgstr "çÁÒÁÚÄ"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Yugoslavian (latin)"
+msgstr "àÇÏÓÌÁ×ÓØËÁ (ÌÁÔÉÎÓØËÁ)"
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installing"
+msgstr "÷ÓÔÁÎÏ×ÌÀÀ"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Launch userdrake"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Where"
-msgstr "ëÏ̦ÝÁÔËÏ"
+msgid "Is this an install or an upgrade?"
+msgstr "ãÅ ÕÓÔÁÎÏ×ËÁ ÞÉ ÐÏÎÏ×ÌÅÎÎÑ?"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "What"
-msgstr "þÅËÁÊÔÅ"
+msgid "ISDN card"
+msgstr "÷ÎÕÔÒ¦ÛÎÑ ÐÌÁÔÁ ISDN"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Send mail report after each backup to:"
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
+"\n"
msgstr ""
+"÷¦ÔÁ¤ÍÏ, ËÏÎƦ­ÕÒÁÃ¦Ñ ÍÅÒÅÖ¦ ÚÁ˦ÎÞÅÎÁ.\n"
+"\n"
+"ôÅÐÅÒ ÃÑ ËÏÎƦ­ÕÒÁÃ¦Ñ ÂÕÄÅ ÚÁÓÔÏÓÏ×ÁÎÁ ÄÏ ×ÁÛϧ ÓÉÓÔÅÍÉ.\n"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "\t-Hard drive.\n"
+msgstr ""
+
+#: ../../help.pm:1
+#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÍÏ×Õ."
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Printer on remote CUPS server"
+msgstr "ðÒÉÎÔÅÒ ÎÁ צÄÄÁÌÅÎÏÍÕ ÓÅÒ×ÅÒ¦ CUPS"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Use daemon"
-msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
+msgid "delete"
+msgstr "óÔÅÒÔÉ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "monthly"
+msgid "here if no."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DHCP host name"
+msgstr "îÁÚ×Á ÈÏÓÔÁ"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "weekly"
+msgid "The maximum lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "daily"
-msgstr ""
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "÷ÉÂÅÒ¦ÔØ ÄÏ ÑËÏÇÏ ÐÏÓ̦ÄÏ×ÎÏÇÏ ÐÏÒÔÕ ÐÒɤÄÎÁÎÏ ÍÉÛÕ?"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "hourly"
-msgstr ""
+msgid "Did it work properly?"
+msgstr "óÐÒÁÃÀ×ÁÌÏ ÎÏÒÍÁÌØÎÏ?"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr ""
+msgid "Poor"
+msgstr "äÕÖÅ ÎÉÚØËÉÊ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "CDROM / DVDROM"
+msgid "The DHCP start range"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save to:"
-msgstr "÷ÉÐÒÏÂÕÊÔÅ ÍÉÛËÕ, ÂÕÄØ-ÌÁÓËÁ"
+#: ../../lang.pm:1
+#, c-format
+msgid "Grenada"
+msgstr "½ÒÅÎÁÄÁ"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
+#: ../../any.pm:1
+#, c-format
+msgid "Unsafe"
+msgstr "îÅÂÅÚÐÅÞÎÏ"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ", %s sectors"
+msgstr ", %s ÓÅËÔÏÒ¦×"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "No"
+msgstr "î¦"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use tape to backup"
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "No CD device defined!"
-msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
+#: ../../lang.pm:1
+#, c-format
+msgid "Guadeloupe"
+msgstr "½×ÁÄÅÌÕÐÁ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
+msgid "could not find any font.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "ëÌÁÃΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁ ЦÄÒÏÚĦ̦"
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "÷É ÈÏÞÅÔÅ ÝÏ BackSpace ÄÁ×Á× Delete ÎÁ ËÏÎÓÏ̦?"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "ëÌÁÃΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁ ЦÄÒÏÚĦ̦"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Vertical refresh rate"
+msgstr "þÁÓÔÏÔÁ ×ÅÒÔÉËÁÌØÎϧ ÒÏÚÇÏÒÔËÉ"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " Erase Now "
-msgstr "ðÅÒÅÎÅÓÔÉ"
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#, c-format
+msgid "Entering step `%s'\n"
+msgstr "ðÏÞÉÎÁ¤ÔØÓÑ ËÒÏË `%s'\n"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "ëÌÁÃΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁ ЦÄÒÏÚĦ̦"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "ëÌÁÃΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁ ЦÄÒÏÚĦ̦"
+msgid "Removing %s ..."
+msgstr "÷ÉÄÁÌÅÎÎÑ LPD..."
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check for multisession CD"
-msgstr "ëÌÁÃΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁ ЦÄÒÏÚĦ̦"
+#: ../../lang.pm:1
+#, c-format
+msgid "Niger"
+msgstr "î¦ÇÅÒ"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No printer"
+msgstr "îÅÍÁ¤ ÐÒÉÎÔÅÒÁ"
+
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "ñËÁ Õ ÷ÁÓ ÒÏÚËÌÁÄËÁ ËÌÁצÁÔÕÒÉ?"
+msgid "alert configuration"
+msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ¦ÎÔÅÒÎÅÔÕ"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
+msgid "NetWare Printer Options"
+msgstr "ïÐæ§ ÐÒÉÎÔÅÒÁ NetWare"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Use CD/DVDROM to backup"
+msgid "%s BootSplash (%s) preview"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Need hostname, username and password!"
+msgid "General"
+msgstr "úÁÇÁÌØΦ"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing system: "
+msgstr "óÉÓÔÅÍÁ ÄÒÕËÕ: "
+
+#: ../../steps.pm:1
+#, c-format
+msgid "Add a user"
+msgstr "äÏÄÁÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Network configuration (%d adapters)"
+msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦ (%d ÐÌÁÔ)"
+
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#, c-format
+msgid "Mandatory package %s is missing"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Remember this password"
-msgstr "ÝÅ ÒÁÚ ÐÁÒÏÌØ"
+#: ../../lang.pm:1
+#, c-format
+msgid "Philippines"
+msgstr "æ¦Ì¦Ð¦ÎÉ"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your password"
-msgstr "âÕÄØ-ÌÁÓËÁ, ÓÐÒÏÂÕÊÔÅ ÝÅ ÒÁÚ"
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#, c-format
+msgid "Ok"
+msgstr "çÁÒÁÚÄ"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your login"
-msgstr "âÕÄØ-ÌÁÓËÁ, ÓÐÒÏÂÕÊÔÅ ÝÅ ÒÁÚ"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "îÁÚ×Á ÐÒÉÎÔÅÒÁ"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "þÉ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ aboot?"
+
+#: ../../keyboard.pm:1
#, c-format
+msgid "Belarusian"
+msgstr "â¦ÌÏÒÕÓØËÁ"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
+"PDQ ЦÄÔÒÉÍÕ¤ Ô¦ÌØËÉ ÌÏËÁÌØΦ ÐÒÉÎÔÅÒÉ, צÄÄÁÌÅΦ ÐÒÉÎÔÅÒÉ LDP ¦\n"
+"ÐÒÉÎÔÅÒÉ, ÝÏ ÐÒÁÃÀÀÔØ ÞÅÒÅÚ Socket/TCP.\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Please enter the host name or IP."
-msgstr "÷ÉÐÒÏÂÕÊÔÅ ÍÉÛËÕ, ÂÕÄØ-ÌÁÓËÁ"
+msgid "Move files to the new partition"
+msgstr "îÅÄÏÓÔÁÔÎØÏ ×¦ÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ ÄÌÑ ÎÏ×ÉÈ Ð¦ÄÒÏÚĦ̦×"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ""
-" Transfer \n"
-"Now"
-msgstr "ðÅÒÅÎÅÓÔÉ"
+msgid "Restore From Catalog"
+msgstr "÷¦ÄÎÏ×ÉÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
-msgstr ""
+msgid "Pitcairn"
+msgstr "ð¦ÔËÁÒÎ"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr ""
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "group :"
+msgstr "òÏÂÏÞÁ ÇÒÕÐÁ"
+
+#: ../../fs.pm:1
#, c-format
-msgid "Net Method:"
+msgid "mounting partition %s in directory %s failed"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use network connection to backup"
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Lilo screen"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Users"
-msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
+#: ../../bootloader.pm:1 ../../help.pm:1
+#, c-format
+msgid "LILO with graphical menu"
+msgstr "LILO Ú ÇÒÁƦÞÎÉÍ ÍÅÎÀ"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Windows (FAT32)"
-msgstr "óÔÅÒÔÉ Windows(TM)"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Estimating"
+msgstr "îÁÂÌÉÖÅÎÅ ÏÂÞÉÓÌÅÎÎÑ"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
+msgid "You can't unselect this package. It is already installed"
+msgstr "÷ÉÂ¦Ò ÃØÏÇÏ ÐÁËÅÔÕ ÎÅÍÏÖÌÉ×Ï ×¦ÄͦÎÉÔÉ. êÏÇÏ ×ÖÅ ×ÓÔÁÎÏ×ÌÅÎÏ."
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remove Selected"
-msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "ðÒÉÎÔÅÒ ÎÁ ÓÅÒ×ÅÒ¦ SMB/Windows 95/98/NT "
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr ""
+msgid "Go on anyway?"
+msgstr "÷ÓÅ-ÔÁËÉ ÐÒÏÄÏ×ÖÕ×ÁÔÉ?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "ûÕËÁÀ ÎÁÑ×Φ ÐÁËÅÔÉ"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
+msgid "Does not appear to be recordable media!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
+msgid "Specify options"
+msgstr "÷ËÁÖ¦ÔØ ÏÐæ§"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
+msgid "Vanuatu"
+msgstr "÷ÁÎÕÁÔÕ"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
+msgid "Either the server name or the server's IP must be given!"
+msgstr "íÁÀÔØ ÂÕÔÉ ×ËÁÚÁÎÉÍÉ ÁÂÏ ÎÁÚ×Á ÓÅÒ×ÅÒÁ, ÁÂÏ ÊÏÇÏ IP ÁÄÒÅÓÁ!"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Select the files or directories and click on 'Add'"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"óÐÅæÁÌØÎÏ ÓÔ×ÏÒÅÎÉÊ ÄÉÓË ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÚÁÂÅÚÐÅÞÉÔØ ÷ÁÍ ÍÏÖÌÉצÓÔØ\n"
+"ÚÁÐÕÓËÕ ÓÉÓÔÅÍÉ ÎÅÚÁÌÅÖÎÏ ×¦Ä Ú×ÉÞÁÊÎÏÇÏ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ. ãÅ ÍÏÖÅ\n"
+"ÚÎÁÄÏÂÉÔÉÓÑ Õ ÔÉÈ ×ÉÐÁÄËÁÈ, ËÏÌÉ ÷É ÎÅ ÂÁÖÁ¤ÔÅ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ SILO ×\n"
+"Ó×Ï§Ê ÓÉÓÔÅͦ, ÁÂÏ ËÏÌÉ ¦ÎÛÁ ÏÐÅÒÁæÊÎÁ ÓÉÓÔÅÍÁ \"ÐÅÒÅÔÉÒÁ¤\" SILO, ÁÂÏ\n"
+"ËÏÌÉ SILO ÎÅ ÐÒÁÃÀ¤ Ú ÎÏ×ÏÀ ËÏÎƦÇÕÒÁæ¤À ÁÐÁÒÁÔÎÉÈ ÚÁÓϦ×. á×ÁÒ¦ÊÎÉÊ\n"
+"ÄÉÓË ÍÏÖÅ ÔÁËÏÖ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ ÒÁÚÏÍ Ú Mandrake Á×ÁÒ¦ÊÎÉÍ ÄÉÓËÏÍ,\n"
+"ÝÏ ÒÏÂÉÔØ ×¦ÄÎÏ×ÌÅÎÎÑ ×¦Ä ÓÅÒÊÏÚÎÉÈ ÓÉÓÔÅÍÎÉÈ ËÒÁÈ¦× ÎÁÂÁÇÁÔÏ\n"
+"ÐÒÏÓÔ¦ÛÉÍ. \n"
+"\n"
+"ñËÝÏ ÷É ÂÁÖÁ¤ÔÅ ÓÔ×ÏÒÉÔÉ Á×ÁÒ¦ÊÎÉÊ ÄÉÓË ÄÌÑ Ó×Ϥ§ ÓÉÓÔÅÍÉ ×ÓÔÁ×ÔÅ\n"
+"ÄÉÓËÅÔÕ × ÐÅÒÛÉÊ ÄÉÓËÏ×¦Ä ¦ ÎÁÔÉÓΦÔØ \"çÁÒÁÚÄ\"."
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../fsedit.pm:1
#, fuzzy, c-format
-msgid "File Selection"
-msgstr "÷ÉÂ¦Ò ÐÁËÅÔ¦×"
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "äÌÑ ÔÏÞËÉ ÍÏÎÔÕ×ÁÎÎÑ %s ÎÅ ÍÏÖÎÁ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÌÏǦÞÎÉÍ ÔÏÍÏÍ LVM"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Can't create catalog!"
-msgstr ""
+msgid "Norfolk Island"
+msgstr "îÏÒÆÏÌËÓØ˦ ÏÓÔÒÏ×É"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, fuzzy, c-format
-msgid " Error while sending mail. \n"
-msgstr "ðÏÍÉÌËÁ ÐÒÉ ÞÉÔÁÎΦ ÆÁÊÌÁ %s"
+msgid "Theme installation failed!"
+msgstr "÷ÉÂÅÒ¦ÔØ ÔÉÐ ÕÓÔÁÎÏ×ËÉ"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
+msgid "Nothing to do"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
+msgid "Use for loopback"
+msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÄÌÑ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
+msgid "use pppoe"
+msgstr "×ÖÉ×ÁÔÉ pppoe"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Moving files to the new partition"
+msgstr "îÅÄÏÓÔÁÔÎØÏ ×¦ÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ ÄÌÑ ÎÏ×ÉÈ Ð¦ÄÒÏÚĦ̦×"
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
msgstr ""
+"XFree %s Ú åëóðåòéíåîôáìøîïà ЦÄÔÒÉÍËÏÀ ÁÐÁÒÁÔÎÏÇÏ ÐÒÉÓËÏÒÅÎÎÑ ÔÒØÏÈ×ÉͦÒÎϧ "
+"ÇÒÁƦËÉ"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "No changes to backup!"
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "äÏÓצÄÞÅÎÉÊ"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "ðÅÒÅÎÅÓÔÉ"
+
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Hard Disk Backup files..."
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
+msgid "Dvorak (Swedish)"
+msgstr "ä×ÏÒÁËÁ (óûá)"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Backup Other files..."
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
+msgid "More Options"
+msgstr "ïÐæ§ ÍÏÄÕÌÑ:"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup User files..."
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
+msgid "Afghanistan"
+msgstr "áÆÇÁΦÓÔÁÎ"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup system files..."
+msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "No tape in %s!"
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
+"cron - ÃÅ ÓÔÁÎÄÁÒÔÎÁ ÐÒÏÇÒÁÍÁ UNIX, ÑËÁ ×ÉËÏÎÕ¤ ×ÉÂÒÁΦ ËÏÒÉÓÔÕ×ÁÞÅÍ\n"
+"ÐÒÏÇÒÁÍÉ ÐÅÒ¦ÏÄÉÞÎÏ Õ ×ÉÂÒÁÎÉÊ ÞÁÓ. vixie cron ÄÏÄÁ¤ ÄÏ ÓÔÁÎÄÁÒÔÎÏÇÏ\n"
+"UNIX cron ˦ÌØËÁ ÎÏ×ÉÈ ÍÏÖÌÉ×ÏÓÔÅÊ, ×ËÌÀÞÁÀÞÉ Ð¦Ä×ÉÝÅÎÕ ÂÅÚÐÅËÕ ÔÁ\n"
+"¦ÌØÛ ÐÏÔÕÖΦ ËÏÎƦÇÕÒÁæÊΦ ÏÐæ§."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr ""
+msgid "Burundi"
+msgstr "âÕÒÕÎĦ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "This may take a moment to erase the media."
+msgid "Add Client -->"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Not erasable media!"
-msgstr ""
+msgid "Read carefully!"
+msgstr "þÉÔÁÊÔÅ Õ×ÁÖÎÏ!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Does not appear to be recordable media!"
+msgid "RW"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "No CDR/DVDR in drive!"
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "WebDAV transfer failed!"
-msgstr ""
+msgid "Port"
+msgstr "ðÏÒÔ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "WebDAV remote site already in sync!"
+msgid "No (experts only)"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Total progess"
-msgstr "ôÅÓÔÕÀ ÓÔÏÒ¦ÎËÉ"
-
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
-"\n"
-"without being prompted for a password."
+msgid "No kernel selected!"
msgstr ""
-#: ../../standalone/drakbackup:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is then suggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "%s not responding"
+msgid "Press enter to boot the selected OS, 'e' to edit the"
msgstr ""
+"Natysnit' enter shchob zavantazhyty vibranu systemu, 'e' shchob redaguvaty"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Can't find %s on %s"
-msgstr "îÅ ÍÏÖÕ ×¦ÄËÒÉÔÉ %s: %s\n"
-
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
+msgid "Set-GID"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Bad password on %s"
-msgstr "âÅÚ ÐÁÒÏÌÀ"
+msgid "The encryption keys do not match"
+msgstr "ðÁÒÏ̦ Ò¦ÚΦ"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No password prompt on %s at port %s"
+msgid "Right \"Windows\" key"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
+msgid "CDROM / DVDROM"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "This may take a moment to generate the keys."
+msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
msgstr ""
+"ðÅÒÛ, Î¦Ö ¦ÔÉ ÄÁ̦, ÷É ÍÁ¤ÔÅ ÐÒÏÞÉÔÁÔÉ Õ×ÁÖÎÏ ÕÍÏ×É Ì¦ÃÅÎÚ¦§. ÷ÏÎÁ\n"
+"ÓÔÏÓÕ¤ÔØÓÑ ×ÓØÏÇÏ ÄÉÓÔÒÕÂÕÔÉ×Õ íÁÎÄÒÅÊË ì¦ÎÁËÓ, ¦, ÑËÝÏ ÷É ÎÅ\n"
+"ÐÏÇÏÄÖÕ¤ÔÅÓØ Ú ÕÍÏ×ÁÍÉ Ì¦ÃÅÎÚ¦§, ÎÁÔÉÓΦÔØ ËÎÏÐËÕ ÷¦ÄÍÏ×ÉÔÉÓØ. ãÅ ÔÏÇÏ\n"
+"Ö ÞÁÓÕ ×¦ÄͦÎÉÔØ ÕÓÔÁÎÏ×ËÕ ÓÉÓÔÅÍÉ. äÌÑ ÐÒÏÄÏ×ÖÅÎÎÑ ÕÓÔÁÎÏ×ËÉ\n"
+"ÎÁÔÉÓΦÔØ ËÎÏÐËÕ ðÏÇÏÄÉÔÉÓØ."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
+msgid "Resolutions"
+msgstr "òÏÚĦÌØΦ ÚÄÁÔÎÏÓÔ¦"
+
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
msgid ""
+"drakfirewall configurator\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
msgstr ""
+"íÁÎÀÓ¦ÎØËÉÊ ÂÒÁÎÄÍÁÕÅÒ\n"
+"\n"
+"㦠ÕÓÔÁÎÏ×ËÉ ËÏÎƦ­ÕÒÕÀÔØ ÐÅÒÓÏÎÁÌØÎÉÊ ÂÒÁÎÄÍÁÕÅÒ (a.k.a. firewall) ÎÁ\n"
+"ÄÁÎ¦Ê ÍÁÛÉΦ Ú ì¦ÎÁËÓ íÁÎÄÒÅÊË. äÌÑ ÔÏÇÏ, ÝÏ ×ÓÔÁÎÏ×ÉÔÉ ÓÅÒÊÏÚÎÉÊ\n"
+"ÐÏÔÕÖÎÉÊ ÂÒÁÎÄÍÁÕÅÒ, Ú×ÅÒΦÔØÓÑ, ÂÕÄØ ÌÁÓËÁ, ÄÏ ÓÐÅæÁ̦ÚÏ×ÁÎÏÇÏ\n"
+"ÄÉÓÔÒÉÂÕÔÉ×Á MandrakeSecurity Firewall."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"Please enter your username, password and domain name to access this host."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "INFO"
+msgid "Network configuration"
+msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "No sharing"
+msgstr "óÔÁÒÔÕ¤ CUPS"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule down one level"
msgstr ""
+#: ../../common.pm:1
+#, c-format
+msgid "TB"
+msgstr "ôÂ"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using a DVDR device"
+msgstr "ëÌÁÃΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁ ЦÄÒÏÚĦ̦"
+
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "FATAL"
msgstr "FAT"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "WARNING"
+msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
+"\n"
+"The network address is %s using a netmask of %s.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr ""
+msgid "Delete"
+msgstr "óÔÅÒÔÉ"
-#: ../../standalone/drakboot:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "õÓÔÁÎÏ×ËÁ %s ÎÅÕÓЦÛÎÁ. óÔÁÌÁÓÑ ÐÏÍÉÌËÁ:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid reboot by the console user."
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "î¦, ÍÅΦ ÎÅ ÐÏÔÒ¦ÂÎÁ Á×ÔÏÍÁÔÉÞÎÁ ÒŤÓÔÒÁæÑ"
+msgid ""
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
+msgstr ""
+"ñ ÍÏÖÕ ÎÁÓÔÒϧÔÉ ÷ÁÛÕ ÓÉÓÔÅÍÕ ÔÁË, ÝÏ X ÂÕÄÅ ÓÔÁÒÔÕ×ÁÔÉ Á×ÔÏÍÁÔÉÞÎÏ\n"
+"ЦÓÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ.\n"
+"þÉ ×É ÈÏÞÅÔÅ, ÝÏ X ÓÔÁÒÔÕ×Á× Á×ÔÏÍÁÔÉÞÎÏ?"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-"ôÁË, Ñ ÈÏÞÕ Á×ÔÏÍÁÔÉÞÎÏ ÒŤÓÔÒÕ×ÁÔÉÓÑ × ÓÉÓÔÅͦ Ú ÃÉÍ (¦ÍÅÎÅÍ, ÓÅÒÅÄÏ×ÉÝÅÍ)"
+msgid "Build the disk"
+msgstr "ðÏÂÕÄÕ×ÁÔÉ ÄÉÓË"
-#: ../../standalone/drakboot:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnect %s"
+msgstr "÷¦Ä'¤ÄÎÁÔÉÓØ"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "úÁÐÕÓËÁÔÉ ×¦ËÎÏ X-Window ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
+msgid "Status:"
+msgstr "óÔÁÔÕÓ:"
-#: ../../standalone/drakboot:1
+#: ../../network/network.pm:1
#, c-format
-msgid "System mode"
-msgstr "óÉÓÔÅÍÎÉÊ ÒÅÖÉÍ"
+msgid "HTTP proxy"
+msgstr "ðÒÏËÓ¦ HTTP"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "SSH Server"
+msgstr "óÅÒ×ÅÒ NIS"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootsplash"
+msgid "\t-Network by rsync.\n"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol"
+msgstr "´×ÒÏÐÅÊÓØËÉÊ ÐÒÏÔÏËÏÌ"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lilo screen"
+msgid ", printer \"%s\" on server \"%s\""
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
+msgid "Error"
+msgstr "ðÏÍÉÌËÁ"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Themes"
-msgstr "ôÅÍÉ"
+msgid "allow \"su\""
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "Splash selection"
-msgstr "úÂÅÒÅÇÔÉ ×ÉÂ¦Ò ÐÁËÅÔ¦×"
+msgid "Australia"
+msgstr "ÐÏÓ̦ÄÏ×ÎÉÊ"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
+msgid "please wait during ttmkfdir..."
msgstr ""
-"×É ËÏÒÉÓÔÕ¤ÔÅÓØ ÚÁ×ÁÎÔÁÖÕ×ÁÞÅÍ ÓÉÓÔÅÍ %s.\n"
-"ëÌÁÃΦÔØ ÎÁ \"îÁÓÔÒϧÔÉ\" ÝÏ ÓÔÁÒÔÕ×ÁÔÉ ÐÏͦÞÎÉË ÕÓÔÁÎÏ×ËÉ."
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr ""
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Configure only card \"%s\"%s"
+msgstr "îÁÓÔÒϧÔÉ Ô¦ÌØËÉ ÐÌÁÔÕ \"%s\" (%s)"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Theme installation failed!"
-msgstr "÷ÉÂÅÒ¦ÔØ ÔÉÐ ÕÓÔÁÎÏ×ËÉ"
+msgid "Level"
+msgstr "Ò¦×ÅÎØ"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Notice"
-msgstr "âÅÚ÷¦ÄÅÏ"
+msgid "Change the printing system"
+msgstr "îÁÓÔÒϧÔÉ ÍÅÒÅÖÕ"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
+msgstr ""
+"÷ÁÛÁ ÓÉÓÔÅÍÁ ÍÏÖÅ ÐÒÁÃÀ×ÁÔÉ Ú Ë¦ÌØËÏÍÁ ÍÏΦÔÏÒÁÍÉ.\n"
+"ýÏ ×É ÈÏÞÅÔÅ ÎÁÓÔÒϧÔÉ?"
+
+#: ../../steps.pm:1
+#, c-format
+msgid "Configure services"
+msgstr "îÁÓÔÒϧÔÉ ÓÅÒצÓÉ"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Relaunch 'lilo'"
+msgid "Broadcast Address:"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
+#, c-format
+msgid "mount failed: "
+msgstr "ÐÏÍÉÌËÁ ÍÏÎÔÕ×ÁÎÎÑ: "
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr ""
+msgid "Image"
+msgstr "ïÂÒÁÚ"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Remote Administration"
+msgstr "ïÐæ§ צÄÄÁÌÅÎÏÇÏ ÐÒÉÎÔÅÒÁ"
+
+#: ../../modules.pm:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Write %s"
-msgstr "XFree86 %s"
+msgid "Selected All"
+msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr ""
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Common Unix Printing System (óЦÌØÎÁ ÓÉÓÔÅÍÁ ÄÒÕËÕ ÄÌÑ àΦËÓ)"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Webmin Service"
+msgstr "óÅÒ×ÅÒ"
+
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Lilo message not found"
-msgstr ""
+msgid "device"
+msgstr "ÐÒÉÓÔÒ¦Ê"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Copy %s to %s"
-msgstr ""
+msgid "All"
+msgstr "÷ÓÅ"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr ""
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "ñËÕ ÞÅÒÇÕ ÄÒÕËÕ (ÓÉÓÔÅÍÕ) ÷É ÈÏÞÅÔÅ ×ÖÉ×ÁÔÉ?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "Create new theme"
-msgstr "óÔ×ÏÒÉÔÉ ÎÏ×ÉÊ ÒÏÚĦÌ"
+msgid "Greece"
+msgstr "çÒÅÃØËÁ"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "An error occurred"
+msgstr "óÔÁÌÁÓÑ ÐÏÍÉÌËÁ"
+
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"Display theme\n"
-"under console"
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
msgstr ""
+"ãÅÊ ÐÁËÅÔ ÐÏ×ÉÎÅÎ ÂÕÔÉ ÐÏÎÏ×ÌÅÎÉÊ\n"
+"÷É ÓÐÒÁ×Ħ ÈÏÞÅÔŠצÄͦÎÉÔÉ ÊÏÇÏ ×ɦÒ?"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Install themes"
-msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ"
+msgid "Tamil (Typewriter-layout)"
+msgstr "÷¦ÒÍÅÎÓØËÁ (ÄÒÕËÁÒÓØËÁ ÍÁÛÉÎËÁ)"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "òÅÖÉÍ Lilo/grub"
+msgid "manual"
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Yaboot mode"
-msgstr "òÅÖÉÍ Yaboot"
+msgid "Printer manufacturer, model, driver"
+msgstr "÷ÉÒÏÂÎÉË ÐÒÉÎÔÅÒÁ, ÍÏÄÅÌØ, ÄÒÁÊ×ÅÒ"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"îÅÍÁ¤ ÎÏÓ¦Ñ × ÐÒÉÓÔÒϧ %s.\n"
+"âÕÄØ ÌÁÓËÁ, ×ÓÔÁ×ÔÅ ÊÏÇÏ."
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/æÁÊÌ/÷_ÉȦÄ"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "/_File"
-msgstr "/æÁÊÌ"
+msgid "Printer on NetWare server"
+msgstr "ðÒÉÎÔÅÒ ÎÁ NetWare ÓÅÒ×ÅÒ¦"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÓÔÉÌÀ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "No browser available! Please install one"
-msgstr ""
-"÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÔÁËÏÖ ¦ÎÛ¦ ÍÏ×É, Ñ˦ ÂÕÄÕÔØ ÄÏÓÔÕÐΦ × ÓÉÓÔÅͦ ЦÓÌÑ\n"
-"ÕÓÔÁÎÏ×ËÉ"
+msgid "Give the ram size in MB"
+msgstr "äÁ×ÁÔÉ ÒÏÚÍ¦Ò ÐÁÍ'ÑÔ¦ × íÂ"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr ""
+msgid "Real name"
+msgstr "ðÏ×ÎÅ ¦Í'Ñ"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Package not installed"
-msgstr "÷ÉÊÔÉ Ú ÕÓÔÁÎÏ×ËÉ"
+msgid "done"
+msgstr "úÁ˦ÎÞÅÎÏ"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Not installed"
-msgstr "÷ÉÊÔÉ Ú ÕÓÔÁÎÏ×ËÉ"
+msgid "Please uncheck or remove it on next time."
+msgstr "÷ÉÂÅÒ¦ÔØ ÄÏ ÑËÏÇÏ ÐÏÓ̦ÄÏ×ÎÏÇÏ ÐÏÒÔÁ ЦÄËÌÀÞÅÎÉÊ ÷ÁÛ ÍÏÄÅÍ?"
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Standalone Tools"
-msgstr "úÁÓÏÂÉ ÄÌÑ ËÏÎÓÏ̦"
+msgid "Higher"
+msgstr "÷ÉÓÏËÉÊ"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Report"
-msgstr "ÐÏÒÔ"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "÷ÉÂÅÒ¦ÔØ Ð¦ÄÒÏÚĦÌÉ, Ñ˦ ÷É ÈÏÞÅÔŠצÄÆÏÒÍÁÔÕ×ÁÔÉ"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Release: "
-msgstr "úÁÞÅËÁÊÔÅ, ÂÕÄØ-ÌÁÓËÁ"
+msgid "Can't find %s on %s"
+msgstr "îÅ ÍÏÖÕ ×¦ÄËÒÉÔÉ %s: %s\n"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr ""
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package: "
-msgstr "÷ÉÂ¦Ò ÐÁËÅÔ¦×"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Application:"
-msgstr "á×ÔÅÎÔÉËÁæÑ"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Configuration Wizards"
-msgstr "ðÏͦÞÎÉË ËÏÎƦÇÕÒÁæ§ ÍÅÒÅÖ¦"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Userdrake"
-msgstr "äÒÕËÁÒËÁ"
+msgid "Japanese 106 keys"
+msgstr "ñÐÏÎÓØËÁ 106 ËÌÁצÛ"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Windows Migration tool"
+msgid "This will take a few minutes."
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Urpmi"
+msgid "Burkina Faso"
+msgstr "âÕÒ˦ÎÁ æÁÓÏ"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Use scanners on remote computers"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Software Manager"
-msgstr "îÁÚ×Á ÒÅÓÕÒÓÕ"
+msgid "Delete selected rule"
+msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remote Control"
-msgstr "÷¦ÄÄÁÌÅÎÉÊ ÐÒÉÎÔÅÒ"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "ðÒÉÎÔÅÒ ÎÁ צÄÄÁÌÅÎÏÍÕ ÓÅÒ×ÅÒ¦ CUPS"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Msec"
-msgstr "íÉÛÁ"
+msgid "Insert a floppy in %s"
+msgstr "÷ÓÔÁ×ÔÅ ÄÉÓËÅÔÕ × ÄÉÓËÏ×¦Ä %s"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Menudrake"
-msgstr "×ÉÚÎÁÞÁÌØÎÉÊ"
+#: ../../lang.pm:1
+#, c-format
+msgid "Maldives"
+msgstr "íÁÌØĦ×É"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
+#, c-format
+msgid "compact"
+msgstr "ËÏÍÐÁËÔÎÉÊ"
+
+#: ../../common.pm:1
+#, c-format
+msgid "1 minute"
+msgstr "1 È×ÉÌÉÎÁ"
+
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Mandrake Online"
-msgstr "ãÅÎÔÒ ËÅÒÕ×ÁÎÎÑ"
+msgid "on channel %d id %d\n"
+msgstr "ÎÁ ÛÉΦ %d id %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "HardDrake"
+msgid ", multi-function device"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Synchronization tool"
+msgid "Laos"
msgstr ""
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "First Time Wizard"
-msgstr "ìÁÓËÁ×Ï ÐÒÏÓÉÍÏ ÄÏ ÐÅÒÛÏÇÏ ÚÁÐÕÓËÕ ðÏͦÞÎÉËÁ"
-
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "Mandrake Control Center"
-msgstr "ãÅÎÔÒ ËÅÒÕ×ÁÎÎÑ"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"îÅÍÁ¤ ЦÄÒÏÚĦÌÕ FAT ÄÌÑ ÚͦÎÉ ÒÏÚͦÒÕ ÁÂÏ ÄÌÑ ×ÉËÏÒÉÓÔÁÎÎÑ ÑË ÐÒÉÓÔÒ¦Ê "
+"Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ (ÁÂÏ ÎÅ ×ÉÓÔÁÞÁ¤ צÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Mandrake Bug Report Tool"
+msgid "Up"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Parameters"
-msgstr "ðÁÒÁÍÅÔÒÉ"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Firewall"
+msgstr "Firewall/íÁÒÛÒÕÔÉÚÁÔÏÒ"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
+msgid "Area:"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "DHCP Client"
-msgstr "ë̦¤ÎÔ DHCP"
+msgid "(E)IDE/ATA controllers"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "ðÌÁÔÁ Ethernet"
+msgid "Printer Server"
+msgstr "ðÒÉÎÔÅÒ ÓÅÒ×ÅÒ"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Gateway"
-msgstr "ûÌÀÚ"
+msgid "Disconnection from the Internet complete."
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "Connection type: "
-msgstr "ôÉÐ Ú×'ÑÚËÕ:"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Custom configuration"
+msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ¦ÎÔÅÒÎÅÔÕ"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Profile: "
-msgstr "ðÒÏƦÌØ: "
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
+msgid "Saint Pierre and Miquelon"
+msgstr "ó×. ð'¤Ò ¦ í¦ËÅÌÏÎ"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
msgstr ""
-"÷É ÎÅ ÍÁ¤ÔÅ ÖÏÄÎÏÇÏ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ.\n"
-"óÔ×ÏÒ¦ÔØ ÔÁËÅ Ú'¤ÄÎÁÎÎÑ ËÌÁÃÎÕ×ÛÉ ÎÁ \"îÁÓÔÒϧÔÉ\""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
+msgid "saving Bootsplash theme..."
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "activate now"
-msgstr "ÁËÔÉצÚÕ×ÁÔÉ ÚÁÒÁÚ"
+msgid "Portugal"
+msgstr "ðÏÒÔÕÇÁ̦Ñ"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "ÄÅÁËÔÉצÚÕ×ÁÔÉ ÚÁÒÁÚ"
+msgid "Do you have another one?"
+msgstr "þÉ ×É ÍÁ¤ÔÅ ¦ÎÛ¦?"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "DHCP client"
-msgstr "Ë̦¤ÎÔ DHCP"
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid ", printing to %s"
+msgstr "ðÏÍÉÌËÁ ÐÒÉ ÚÁÐÉÓ¦ Õ ÆÁÊÌ %s"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Started on boot"
-msgstr "óÔÁÒÔÕ×ÁÔÉ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Assign host name from DHCP address"
+msgstr "÷ÉÐÒÏÂÕÊÔÅ ÍÉÛËÕ, ÂÕÄØ-ÌÁÓËÁ"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "ðÒÏÔÏËÏÌ ÚÁ×ÁÎÔÁÖÅÎÎÑ"
+msgid "Toggle to normal mode"
+msgstr "åËÓÐÅÒÔ > ú×ÉÞÁÊÎÉÊ"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "ðÌÁÔÁ %s: %s"
+msgid "Generic"
+msgstr "úÁÇÁÌØÎÅ"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Cylinder %d to %d\n"
+msgstr "÷¦Ä ÃÉ̦ÎÄÒÕ %d ÄÏ ÃÉ̦ÎÄÒÕ %d \n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "LAN Configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦"
+msgid "New profile..."
+msgstr "îÏ×ÉÊ ÐÒÏƦÌØ..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
+msgid "Which disk do you want to move it to?"
+msgstr "îÁ ÑËÉÊ ÄÉÓË ×É ÈÏÞÅÔÅ ÐÅÒÅͦÓÔÉÔÉÓÑ?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
+msgid "Display logo on Console"
msgstr ""
-"õ ×ÁÓ ÎÅÍÁ¤ ÖÏÄÎÏÇÏ ÓËÏÎƦ­ÕÒÏ×ÁÎÏÇÏ ¦ÎÔÅÒÆÅÊÓÁ.\n"
-"óËÏÎƦ­ÕÒÕÊÔÅ §È ÓÐÏÞÁÔËÕ, ËÌÁÃÎÕ×ÛÉ ÎÁ \"îÁÓÔÒϧÔÉ\""
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Windows Domain"
+msgstr "äÏÍÅÎ NIS"
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Interface %s (on network %s)"
+msgstr "¶ÎÔÅÒÆÅÊÓ %s (Ú ×ÉËÏÒÉÓÔÁÎÎÑÍ ÍÏÄÕÌÑ %s)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Connect..."
-msgstr "ú'¤ÄÎÁÎÎÑ..."
+msgid "INFO"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Wallis and Futuna"
+msgstr "÷ÁÌ¦Ó ¦ æÕÔÕÎÓØ˦ ÏÓÔÒÏ×É"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Disconnect..."
-msgstr "÷¦ÄËÌÀÞÅÎÎÑ..."
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Not connected"
-msgstr "îÅÍÁ¤ Ú'¤ÄÎÁÎÎÑ"
+msgid "Is FPU present"
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Connected"
-msgstr "ú'¤ÄÎÁÎÏ"
+msgid "There are no scanners found which are available on your system.\n"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+"No additional information\n"
+"about this service, sorry."
msgstr ""
+"÷ÉÂÁÞÔÅ, ÎÅÍÁ¤ ÄÏÄÁÔËÏ×ϧ \n"
+"¦ÎÆÏÒÍÁæ§ ÐÒÏ ÃÅÊ ÓÅÒצÓ."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Interface:"
-msgstr "¶ÎÔÅÒÆÅÊÓ:"
+msgid "Build Single NIC -->"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "ûÌÀÚ:"
+msgid "Is this correct?"
+msgstr "÷ÓŠצÒÎÏ?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Apply"
-msgstr "úÁÓÔÏÓÕ×ÁÔÉ"
+msgid "Marshall Islands"
+msgstr "íÁÒÛÁÌÏצ ÏÓÔÒÏ×É"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Windows (FAT32)"
+msgstr "óÔÅÒÔÉ Windows(TM)"
+
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Root password"
+msgstr "âÅÚ ÐÁÒÏÌÀ"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Click here to launch the wizard ->"
+msgid "Build All Kernels -->"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "ðÏͦÞÎÉË..."
+msgid "if set to yes, report unowned files."
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Status:"
-msgstr "óÔÁÔÕÓ:"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"÷É ÎÅ ÍÁ¤ÔŠЦÄÒÏÚĦÌÕ ÄÌÑ Ó×ÏЦÎÇÕ\n"
+"\n"
+"÷ÓÅ-ÔÁËÉ ÐÒÏÄÏ×ÖÕ×ÁÔÉ? "
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Type:"
-msgstr "ôÉÐ:"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Server IP missing!"
+msgstr "îÅÍÁ¤ ÎÁÚ×É ÓÅÒ×ÅÒÁ NCP!"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet access"
-msgstr "äÏÓÔÕÐ ÄÏ ¦ÎÔÅÒÎÅÔÕ"
+msgid "Suriname"
+msgstr "óÕÒ¦ÎÁÍ"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Hostname: "
-msgstr "¶Í'Ñ ÈÏÓÔÁ:"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Enable ACPI"
+msgstr "äÏÚ×ÏÌÉÔÉ ÚÁ×ÁÎÔÁÖÅÎÎÑ Ú ËÏÍÐÁËÔ-ÄÉÓËÕ?"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "îÁÓÔÒϧÔÉ ÌÏËÁÌØÎÕ ÍÅÒÅÖÕ..."
+msgid "Graphical Environment"
+msgstr "çÒÁƦÞÎÅ ÓÅÒÅÄÏ×ÉÝÅ"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "State"
-msgstr "óÔÁÔÕÓ"
+msgid "Gibraltar"
+msgstr "½¦ÂÒÁÌÔÁÒ"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Driver"
-msgstr "äÒÁÊ×ÅÒ"
+msgid "on Tape Device"
+msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Protocol"
-msgstr "ðÒÏÔÏËÏÌ"
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Do nothing"
+msgstr "ÁÌŠΊצÄÐÏצÄÁ¤"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Interface"
-msgstr "¶ÎÔÅÒÆÅÊÓ"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete Client"
+msgstr "ë̦¤ÎÔ DHCP"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "îÁÓÔÒϧÔÉ ÄÏÓÔÕÐ ÄÏ ¦ÎÔÅÒÎÅÔÕ..."
+msgid "Filesystem type: "
+msgstr "ôÉРЦÄÒÏÚĦÌÕ: "
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "Wait please"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Starting network..."
+msgstr "ðÏÞÉÎÁÀ Ú'¤ÄÎÁÎÎÑ..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Vietnam"
+msgstr "÷'¤ÔÎÁÍ"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_Fields description"
+msgstr "ïÐÉÓ"
+
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
+msgid "Optimize your security by using Mandrake Linux"
msgstr ""
-"îÁÚ×Á ÐÒÏƦÌÀ ÄÌÑ ÓÔ×ÏÒÅÎÎÑ (ÎÏ×ÉÊ ÐÒÏƦÌØ ÓÔ×ÏÒÀ¤ÔØÓÑ ÑË ËÏÐ¦Ñ ×ÖÅ "
-"¦ÓÎÕÀÞÏÇÏ):"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "New profile..."
-msgstr "îÏ×ÉÊ ÐÒÏƦÌØ..."
+msgid "Help"
+msgstr "äÏצÄËÁ"
-#: ../../standalone/drakconnect:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Profile to delete:"
-msgstr "ðÒÏƦÌØ ÄÌÑ ÓÔÉÒÁÎÎÑ:"
+msgid "Your personal phone number"
+msgstr "÷ÁÛ ÏÓÏÂÉÓÔÉÊ ÎÏÍÅÒ ÔÅÌÅÆÏÎÕ"
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Del profile..."
-msgstr "óÔÅÒÔÉ ÐÒÏƦÌØ..."
+msgid "Which size do you want to keep for Windows on"
+msgstr "ñËÉÊ ÒÏÚÍ¦Ò ×É ÈÏÞÅÔÅ ÚÁÌÉÛÉÔÉ ÄÌÑ Windows?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦ (%d ÐÌÁÔ)"
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+msgstr ""
+"ôÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ ÐÅÒÅÄÁÎÁ ÐÒÏÇÒÁͦ ÄÒÕËÕ.\n"
+"ðÅÒÅÄ ÔÉÍ, ÑË ÐÒÉÎÔÅÒ ÐÏÞÎÅ ÄÒÕËÕ×ÁÔÉ, ÍÏÖÌÉ×Ï ÐÒÏÊÄÅ\n"
+"ÄÅÑËÉÊ ÞÁÓ. þÉ ×¦Î ÐÒÁÃÀ¤ ËÏÒÅËÔÎÏ?\n"
-#: ../../standalone/drakedm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username required"
+msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
msgstr ""
+"ú×ÉÞÎÏ drakX ×ÉÂÉÒÁ¤ צÒÎÕ ËÌÁצÁÔÕÒÕ (× ÚÁÌÅÖÎÏÓÔ¦ ×¦Ä ÍÏ×É, ÑËÏÀ ÷É\n"
+"ËÏÒÉÓÔÕ¤ÔÅÓØ) ¦ ÷É ÎÅ ÐÏÂÁÞÉÔÅ ÃØÏÇÏ ËÒÏËÕ. ïÄÎÁË, ÍÏÖÌÉ×Ï, ÷É ÎÅ\n"
+"ÍÁ¤ÔÅ ËÌÁצÁÔÕÒÉ, ÝÏ ÔÏÞÎÏ ×¦ÄÐÏצÄÁ¤ ÷ÁÛ¦Ê ÍÏצ: ÎÁÐÒÉËÌÁÄ, ÑËÝÏ ÷É\n"
+"ÁÇÌÏÍÏ×ÎÉÊ Û×ÅÄ, ÷É ×ÓÅ-ÏÄÎÏ ÍÏÖÅÔÅ ÚÁÂÁÖÁÔÉ ËÏÒÉÓÔÕ×ÁÔÉÓØ Û×ÅÄÓØËÏÀ\n"
+"ËÌÁצÁÔÕÒÏÀ. áÂÏ, ÑËÝÏ ÷É ÇÏ×ÏÒÉÔÅ ÁÎÇ̦ÊÓØËÏÀ, ÁÌÅ ÖÉ×ÅÔÅ × ë×ÅÂÅËÕ,\n"
+"÷É ÐÏÔÒÁÐÌѤÔÅ × ÁÎÁÌÏ­¦ÞÎÕ ÓÉÔÕÁæÀ. ÷ ÏÂÏÈ ×ÉÐÁÄËÁÈ, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ\n"
+"ÐÏ×ÅÒÎÕÔÉÓØ ÄÏ ÃØÏÇÏ ÅÔÁÐÕ ÕÓÔÁÎÏ×ËÉ ¦ ×ÉÂÒÁÔÉ ×¦ÄÐÏצÄÎÕ ËÌÁצÁÔÕÒÕ Ú\n"
+"ÎÁÄÁÎÏÇÏ ÓÐÉÓËÕ. ÷ÓÅ, ÝÏ ÐÏÔÒ¦ÂÎÏ, ÃÅ ×ÉÂÒÁÔÉ ÐÏÔÒ¦ÂÎÕ ËÌÁצÁÔÕÒÕ ¦Ú\n"
+"ÓÐÉÓËÕ, ÝÏ Ú'Ñ×ÌѤÔØÓÑ ÐÅÒÅÄ ÷ÁÍÉ.\n"
+"\n"
+"îÁÔÉÓΦÔØ ËÎÏÐËÕ äÏÄÁÔËÏ×Ï ¦ ÷É ÐÏÂÁÞÉÔÅ ÐÏ×ÎÉÊ ÓÐÉÓÏË ÒÏÚËÌÁÄÏË\n"
+"ËÌÁצÁÔÕÒ."
-#: ../../standalone/drakedm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choosing a display manager"
-msgstr ""
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "ïÐæ§ SMB (Windows 9x/NT) ÐÒÉÎÔÅÒÁ"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
msgstr ""
-"îÅ ÍÏÖÕ ËÏÒÅËÔÎÏ ÚÁ×ÅÒÛÉÔÉ mkbootdisk: \n"
-"%s\n"
-"%s"
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "îÅÍÏÖÌÉ×Ï ×ÉËÏÎÁÔÉ fork: %s"
+msgid "mkinitrd optional arguments"
+msgstr "ÄÏÄÁÔËÏצ ÁÒ­ÕÍÅÎÔÉ ÄÌÑ mkinitrd"
-#: ../../standalone/drakfloppy:1
-#, fuzzy, c-format
+#: ../../share/advertising/03-software.pl:1
+#, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
msgstr ""
-"îÅÍÁ¤ ÎÏÓ¦Ñ × ÐÒÉÓÔÒϧ %s.\n"
-"âÕÄØ ÌÁÓËÁ, ×ÓÔÁ×ÔÅ ÊÏÇÏ."
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "ðÅÒÅÓצÄÞ¦ÔØÓÑ, ÝÏ ÎÏÓ¦Ê ×ÓÔÁ×ÌÅÎÉÊ × ÐÒÉ×¦Ä %s"
+msgid "Protocol for the rest of the world"
+msgstr "ðÒÏÔÏËÏÌ ÄÌÑ ×ÓØÏÇÏ ¦ÎÛÏÇÏ ÓצÔÕ"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build the disk"
-msgstr "ðÏÂÕÄÕ×ÁÔÉ ÄÉÓË"
+msgid "Print test pages"
+msgstr "äÒÕË ÔÅÓÔÏ×ÉÈ ÓÔÏÒ¦ÎÏË"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Output"
-msgstr "÷ÉȦÄ"
+msgid "64 MB or more"
+msgstr "64 í ÞÉ Â¦ÌØÛÅ"
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Remove a module"
-msgstr "úÁÂÒÁÔÉ ÍÏÄÕÌØ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"÷ÉÂÅÒ¦ÔØ, ÂÕÄØ ÌÁÓËÁ, ÓÔÏÒ¦ÎËÉ ÄÌÑ ÄÒÕËÕ\n"
+"úÁÕ×ÁÖÔÅ: ÄÒÕË ÆÏÔÏÇÒÁƦÞÎÉÈ ÔÅÓÔÏ×ÉÈ ÓÔÏÒ¦ÎÏË ÍÏÖÅ ÂÕÔÉ ÄÏ×ÇÉÍ ¦\n"
+"ÌÁÚÅÒΦ ÐÒÉÎÔÅÒÉ Ú ÎÅ×ÅÌÉËÉÍ ÏÂ'¤ÍÏÍ ÐÁÍ'ÑÔ¦ ÍÏÖÕÔØ ÎÁצÔØ ÚÏ×Ó¦Í ÎÅ\n"
+"ÎÁÄÒÕËÕ×ÁÔÉ ÔÁËÕ ÓÔÏÒ¦ÎËÕ. õ ¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦Ä ÄÏÓÔÁÔÎØÏ ÎÁÄÒÕËÕ×ÁÔÉ\n"
+"ÓÔÁÎÄÁÒÔÎÕ ÐÒÏÂÎÕ ÓÔÏÒ¦ÎËÕ."
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Add a module"
-msgstr "äÏÄÁÔÉ ÍÏÄÕÌØ"
+msgid "Please select the device where your %s is attached"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr "ÐÒÏÐÕÓËÁÔÉ ÍÏÄÕ̦ scsi"
+msgid "Not formatted\n"
+msgstr "îÅ ÆÏÒÍÁÔÏ×ÁÎÉÊ\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "if needed"
-msgstr "ÑËÝÏ ÐÏÔÒ¦ÂÎÏ"
+msgid "Periodic Checks"
+msgstr ""
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "omit raid modules"
-msgstr "ÐÒÏÐÕÓËÁÔÉ ÍÏÄÕ̦ raid"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "PXE Server Configuration"
+msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦"
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "force"
-msgstr "ÐÒÉÍÕÓÏ×Ï"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup the system files before:"
+msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"ãÅ - ÓÔÁÎÄÁÒÔÎÉÊ Ò¦×ÅÎØ ÂÅÚÐÅËÉ, ÑËÉÊ ÒÅËÏÍÅÎÄÕ¤ÔØÓÑ ÍÁÔÉ ÎÁ\n"
+"ËÏÍÐ'ÀÔÅÒ¦, ЦÄËÌÀÞÅÎÏÍÕ ÄÏ ¦ÎÔÅÒÎÅÔÕ × ÑËÏÓÔ¦ Ë̦¤ÎÔÁ. ðÅÒÅצÒËÉ\n"
+"ÂÅÚÐÅËÉ ÔÅÐÅÒ ×ÍÉËÎÅΦ."
+
+#: ../../any.pm:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "ÄÏÄÁÔËÏצ ÁÒ­ÕÍÅÎÔÉ ÄÌÑ mkinitrd"
+msgid "First floppy drive"
+msgstr "ðÅÒÛÁ ÄÉÓËÅÔÁ"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Expert Area"
-msgstr "ä¦ÌÑÎËÁ ÄÌÑ ÅËÓÐÅÒÔ¦×"
+msgid "/File/_Quit"
+msgstr "/æÁÊÌ/÷_ÉȦÄ"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "kernel version"
-msgstr "×ÅÒÓ¦Ñ ÑÄÒÁ"
+msgid "Dvorak"
+msgstr "ä×ÏÒÁËÁ"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "default"
-msgstr "ÓÔÁÎÄÁÒÔÎÉÊ"
+msgid "Choose the new size"
+msgstr "÷ÉÂÅÒ¦ÔØ ÎÏ×ÉÊ ÒÏÚͦÒ"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "General"
-msgstr "úÁÇÁÌØΦ"
+msgid "Media class"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "boot disk creation"
-msgstr "ÓÔ×ÏÒÅÎÎÑ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÏÇÏ ÄÉÓËÕ"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../lang.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "Faroe Islands"
+msgstr "æÁÒÅÒÓØ˦ ÏÓÔÒÏ×É"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Size"
-msgstr "òÏÚͦÒ"
+msgid "Restart XFS"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Module name"
-msgstr "îÁÚ×Á ÍÏÄÕÌÑ"
+msgid "Add host/network"
+msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Uninstall"
-msgstr "÷ÉÊÔÉ Ú ÕÓÔÁÎÏ×ËÉ"
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Remove fonts on your system"
-msgstr "õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦!"
+msgid "Please enter the directory to save to:"
+msgstr "÷ÉÐÒÏÂÕÊÔÅ ÍÉÛËÕ, ÂÕÄØ-ÌÁÓËÁ"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Initial tests"
-msgstr "ðÏצÄÏÍÌÅÎÎÑ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
+msgid "Model name"
+msgstr "îÁÚ×Á ÍÏÄÕÌÑ"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Install"
-msgstr "õÓÔÁÎÏ×ËÁ"
+#: ../../lang.pm:1
+#, c-format
+msgid "Albania"
+msgstr "áÌÂÁΦÑ"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install & convert Fonts"
+msgid "No CDR/DVDR in drive!"
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Copy fonts on your system"
-msgstr "õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦!"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Remove List"
-msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
+#: ../../lang.pm:1
+#, c-format
+msgid "British Indian Ocean Territory"
+msgstr "âÒÉÔÁÎÓØËÁ ÔÅÒÉÔÏÒ¦Ñ × ¶ÎĦÊÓØËÏÍÕ ÏËÅÁΦ"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Selected All"
-msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Normal Mode"
+msgstr "ú×ÉÞÁÊÎÉÊ ÒÅÖÉÍ"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unselected All"
+msgid ""
+"Please be sure that the cron daemon is included in your services. \n"
+"\n"
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "here if no."
-msgstr ""
+msgid "Printer connection type"
+msgstr "ôÉÐ Ú'¤ÄÎÁÎÎÑ ÐÒÉÎÔÅÒÁ"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "click here if you are sure."
-msgstr ""
+msgid "No network adapter on your system!"
+msgstr "õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Install List"
-msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ"
+msgid "Network %s"
+msgstr "íÅÒÅÖÁ:"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
+msgid "Malayalam"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
+msgid "Option %s out of range!"
+msgstr "ðÁÒÁÍÅÔÒ %s ×ÉÈÏÄÉÔØ ÚÁ ÒÁÍËÉ ÄÏÚ×ÏÌÅÎÉÈ ÍÅÖ!"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Generic Printers"
-msgstr "ðÒÉÎÔÅÒ"
+msgid "Connect %s"
+msgstr "ú'¤ÄÎÁÔÉÓØ"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Abiword"
-msgstr "÷¦ÄͦÎÉÔÉ"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Restarting CUPS..."
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "StarOffice"
-msgstr "ïƦÓÎÁ ÓÔÁÎæÑ"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "÷ÉÍÉËÁÀ ÍÅÒÅÖÕ"
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Ghostscript"
+msgid "Duplicate mount point %s"
+msgstr "ðÏÄצÊΦ ÔÏÞËÉ ÍÏÎÔÕ×ÁÎÎÑ %s"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, run chkrootkit checks."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Connection Configuration"
+msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ Ú'¤ÄÎÁÎÎÑ"
+
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "÷ÉÂÅÒ¦ÔØ Ð¦ÄÒÏÚĦÌÉ, Ñ˦ ÷É ÈÏÞÅÔŠצÄÆÏÒÍÁÔÕ×ÁÔÉ"
+msgid "Unknown|Generic"
+msgstr "úÁÇÁÌØÎÅ"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "About"
-msgstr "÷¦ÄͦÎÉÔÉ"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Font List"
-msgstr "ôÏÞËÁ ÍÏÎÔÕ×ÁÎÎÑ"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Advanced Options"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦"
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Quit"
+msgstr "÷ÉȦÄ"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Uninstall Fonts"
-msgstr "äŦÎÓÔÁÌÀÀ RPM'É"
+#: ../../lang.pm:1
+#, c-format
+msgid "Myanmar"
+msgstr "íØÑÎÍÁÒ"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr ""
+msgid "Auto allocate"
+msgstr "á×ÔÏÍÁÔÉÞÎÏ ÒÏÚÐÏĦÌÉÔÉ"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Import Fonts"
-msgstr "æÏÒÍÁÔÕ×ÁÔÉ Ð¦ÄÒÏÚĦÌÉ"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Check bad blocks?"
+msgstr "ðÅÒÅצÒÑÔÉ Ú¦ÊΦ ÂÌÏËÉ?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "done"
-msgstr "úÁ˦ÎÞÅÎÏ"
+msgid "Other MultiMedia devices"
+msgstr "¶ÎÛ¦"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "xfs restart"
-msgstr "ÏÂÍÅÖÉÔÉ"
-
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Suppress Fonts Files"
-msgstr ""
+msgid "No remote machines"
+msgstr "(ÎÁ Ã¦Ê ÍÁÛÉΦ)"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Restart XFS"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr ""
+msgid "Authentication NIS"
+msgstr "NIS Á×ÔÅÎÔÉËÁæÑ"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "type1inst building"
-msgstr ""
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr "ïÐÃ¦Ñ ``ïÂÍÅÖÉÔÉ ÏÐæ§ ËÏÍÁÎÄÎÏÇÏ ÒÑÄËÁ'' ÎÅ ÍÁ¤ ÓÅÎÓÕ ÂÅÚ ÐÁÒÏÌÑ"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr ""
+msgid "Internet Connection Sharing currently enabled"
+msgstr "óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÍÉËÎÅÎÅ"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "ttf fonts conversion"
-msgstr ""
+msgid "Card IO_0"
+msgstr "÷/÷_0 ËÁÒÔËÉ"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr ""
+msgid "United Arab Emirates"
+msgstr "ïÂ'¤ÄÎÁΦ áÒÁÂÓØ˦ åͦÒÁÔÉ"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Fonts conversion"
-msgstr ""
+msgid "Card IO_1"
+msgstr "÷/÷_1 ËÁÒÔËÉ"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "True Type install done"
-msgstr ""
+msgid "Thailand"
+msgstr "ôÁÊÌÁÎÄ"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "please wait during ttmkfdir..."
+msgid "Routers:"
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "True Type fonts installation"
-msgstr "ð¦ÄÇÏÔÏ×ËÁ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Fonts copy"
-msgstr "æÏÒÍÁÔÕ×ÁÔÉ ÄÉÓËÅÔÕ"
-
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr ""
+msgid "Kazakhstan"
+msgstr "ëÁÚÁÈÓÔÁÎ"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "could not find any font.\n"
+msgid "Display all available remote CUPS printers"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr ""
+msgid "Mandrake Linux Installation %s"
+msgstr "õÓÔÁÎÏ×ËÁ Mandrake Linux %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "no fonts found"
-msgstr "îÅ ÚÎÁÊÄÅÎÏ %s."
+msgid "Thai keyboard"
+msgstr "ôÁÊÓØËÁ ËÌÁצÁÔÕÒÁ"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr ""
+msgid "Dialup options"
+msgstr "ðÁÒÁÍÅÔÒÉ Ú×'ÑÚËÕ ÐÏ ÍÏÄÅÍÕ"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr ""
+msgid "Bouvet Island"
+msgstr "âÕ×Å"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search installed fonts"
+msgid "If no port is given, 631 will be taken as default."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"ìÁÓËÁ×Ï ÐÒÏÓÉÍÏ ÄÏ ÐÒÏÇÒÁÍÉ ËÏÎƦ­ÕÒÁæ§ ÓЦÌØÎÏÇÏ ËÏÒÉÓÔÕ×ÁÎÎÑ\n"
-"Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ\n"
+"úͦΦÔØ ËÏÍÐÁËÔ-ÄÉÓË!\n"
"\n"
-"%s\n"
+"âÕÄØ-ÌÁÓËÁ, ×ÓÔÁ×ÔÅ ËÏÍÐÁËÔ-ÄÉÓË, ÐÏÚÎÁÞÅÎÉÊ \"%s\" Õ ÐÒÉÓÔÒ¦Ê ¦\n"
+"ÎÁÔÉÓΦÔØ çÁÒÁÚÄ Ð¦ÓÌÑ ÃØÏÇÏ.\n"
"\n"
-"ëÌÁÃΦÔØ ÎÁ \"îÁÓÔÒϧÔÉ\" ÝÏ ÚÁÐÕÓÔÉÔÉ ËÏÎƦ­ÕÒÁÔÏÒ."
+"ñËÝÏ ×É ÎÅ ÍÁ¤ÔÅ ÔÁËÏÇÏ ÄÉÓËÕ, ÎÁÔÉÓΦÔØ ÷¦ÄͦÎÉÔÉ, ÝÏ ÎÅ\n"
+"×ÓÔÁÎÏ×ÌÀ×ÁÔÉ Ú ÃØÏÇÏ ÄÉÓËÕ."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÓЦÌØÎÏÇÏ ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ."
+msgid "Polish"
+msgstr "ðÏÌØÓØËÁ"
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ÓËÏÎƦÇÕÒÏ×ÁÎÏ"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Mandrake Online"
+msgstr "ãÅÎÔÒ ËÅÒÕ×ÁÎÎÑ"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
+msgid "\t-Network by webdav.\n"
msgstr ""
-"õÓÔÁÎÏ×ËÁ ÓЦÌØÎÏÇÏ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÖÅ ÚÒÏÂÌÅÎÁ,\n"
-"ÎÁ ÄÁÎÉÊ ÞÁÓ ×ÏÎÏ ÄÏÚ×ÏÌÅÎÏ."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
-"õÓÔÁÎÏ×ËÁ ÓЦÌØÎÏÇÏ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÖÅ ÚÒÏÂÌÅÎÁ,\n"
-"ÁÌÅ ÎÁ ÄÁÎÉÊ ÍÏÍÅÎÔ ×ÏÎÏ ×¦ÄËÌÀÞÅÎÏ."
+"õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÓËÏÎƦ­ÕÒÏ×ÁÎÏÇÏ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦\n"
+"ethernet. óËÏÒÉÓÔÁÊÔÅÓØ, ÂÕÄØ-ÌÁÓËÁ, ÐÒÏÇÒÁÍÏÀ ÄÌÑ ËÏÎƦÇÕÒÁæ§\n"
+"ÁÐÁÒÁÔÎÉÈ ÚÁÓϦ×."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"÷ÓÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ. \n"
-"\n"
-"÷É ÍÏÖÅÔÅ ÓЦÌØÎÏ ËÏÒÉÓÔÕ×ÁÔÉÓÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ÒÁÚÏÍ Ú ¦ÎÛÉÍÉ\n"
-"ËÏÍÐ'ÀÔÅÒÁÍÉ × ×ÁÛ¦Ê ÌÏËÁÌØÎ¦Ê ÍÅÒÅÖ¦, Ú ×ÉËÏÒÉÓÔÁÎÎÑÍ Á×ÔÏÍÁÔÉÞÎÏÇÏ\n"
-"ËÏÎƦ­ÕÒÕ×ÁÎÎÑ ÍÅÒÅÖ¦ (DHCP)."
+msgid "Netmask"
+msgstr "íÁÓËÁ ÍÅÒÅÖ¦"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
-#, c-format
-msgid "Problems installing package %s"
-msgstr "ðÏÍÉÌËÉ ÐÒÉ ÕÓÔÁÎÏ×æ ÐÁËÅÔÕ %s"
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "No hard drives found"
+msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÓËÒÉÐÔ¦×, ÕÓÔÁÎÏ×ËÁ ÐÒÏÇÒÁÍ, ÓÔÁÒÔÕ×ÁÎÎÑ ÓÅÒ×ÅÒ¦×..."
+msgid "Logitech CC Series"
+msgstr "ôÉÐÕ Logitech CC"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "ëÏÎƦÇÕÒÁæÑ..."
+msgid "2 buttons"
+msgstr "ä×ÏÈ ËÎÏÐÏÞÎÁ"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "÷ ÄÁÎ¦Ê ËÏÎƦÇÕÒÁæ§ %s ÚÎÁÊÄÅÎÏ ÐÏÔÅÎæÊÎÉÊ ËÏÎÆ̦ËÔ ÁÄÒÅÓÉ ÍÅÒÅÖ¦!\n"
+msgid "What kind is your ISDN connection?"
+msgstr "ñËÉÊ ÔÉÐ Ú'¤ÄÎÁÎÎÑ ISDN ÷É ÍÁ¤ÔÅ?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
+msgid "Label"
+msgstr "åÔÉËÅÔËÁ"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr ""
+msgid "Save on floppy"
+msgstr "úÁÐÉÓÁÔÉ ÎÁ ÄÉÓËÅÔÕ"
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer auto-detection"
+msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "Which of the following is your ISDN card?"
+msgstr "ñËÁ ÷ÁÛÁ ISDN ÐÌÁÔÁ?"
+
+#: ../../services.pm:1
#, c-format
-msgid "The default lease (in seconds)"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
msgstr ""
+"NFS - ÃÅ ÄÕÖÅ ÐÏÐÕÌÑÒÎÉÊ ÐÒÏÔÏËÏÌ ÄÌÑ ÓЦÌØÎÏÇÏ ×ÉËÏÒÉÓÔÁÎÎÑ ÆÁÊÌ¦× ÎÁ\n"
+"ËÏÍÐ'ÀÔÅÒÁÈ, Ú'¤ÄÎÁÎÉÈ ÍÅÒÅÖÅÀ TCP/IP. ãÅÊ ÓÅÒ×¦Ó ÚÁÂÅÚÐÅÞÕ¤ NFS\n"
+"ÓÅÒ×ÅÒ, ÑËÉÊ ËÏÎƦ­ÕÒÕ¤ÔØÓÑ ÚÁ ÄÏÐÏÍÏÇÏÀ ÆÁÊÌÁ /etc/exports."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Msec"
+msgstr "íÉÛÁ"
+
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The DHCP end range"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "The DHCP start range"
+msgid "Number of capture buffers:"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The internal domain name"
-msgstr "îÏ×Á ÎÁÚ×Á ÐÒÉÎÔÅÒÁ"
-
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, fuzzy, c-format
-msgid "The DNS Server IP"
-msgstr "IP ÁÄÒÅÓÁ CUPS ÓÅÒ×ÅÒÁ"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "÷ÁÛ ×ɦÒ? (ÒÅËÏÍÅÎÄÏ×ÁÎÉÊ %s) "
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "(This) DHCP Server IP"
-msgstr "IP ÁÄÒÅÓÁ CUPS ÓÅÒ×ÅÒÁ"
-
-#: ../../standalone/drakgw:1
-#, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
+"âÕÄØ-ÑËÉÊ Ú ÎÏ×ÉÈ ×ÉÚÎÁÞÅÎÉÈ Ð¦ÄÒÏÚÄ¦Ì¦× ÍÁ¤ ÂÕÔÉ ×¦ÄÆÏÒÍÁÔÏ×ÁÎÉÊ ÄÌÑ\n"
+"×ÉËÏÒÉÓÔÁÎÎÑ (ÆÏÒÍÁÔÕ×ÁÎÎÑ ÏÚÎÁÞÁ¤ ÓÔ×ÏÒÅÎÎÑ ÆÁÊÌÏ×ϧ ÓÉÓÔÅÍÉ).\n"
+"\n"
+"úÁÒÁÚ ÷É, ÍÏÖÌÉ×Ï, ÚÁÈÏÞÅÔŠצÄÆÏÒÍÁÔÕ×ÁÔÉ ÄÅÑ˦ Ú ÕÖÅ ¦ÓÎÕÀÞÉÈ\n"
+"ЦÄÒÏÚÄ¦Ì¦× ÄÌÑ ÔÏÇÏ, ÝÏ ÓÔÅÒÔÉ ÄÁΦ, Ñ˦ ÎÁ ÎÉÈ ÚÁÐÉÓÁΦ. ñËÝÏ ÷É\n"
+"ÈÏÞÅÔÅ ÃÅ ÚÒÏÂÉÔÉ, ×ÉÂÅÒ¦ÔØ ÔÁËÏÖ Ð¦ÄÒÏÚĦÌÉ, Ñ˦ ×É ÈÏÞÅÔÅ\n"
+"צÄÆÏÒÍÁÔÕ×ÁÔÉ.\n"
+"\n"
+"úÁÕ×ÁÖÔÅ, ÏÄÎÁË, ÝÏ ÎÅ ÏÂÏ×'ÑÚËÏ×Ï ÆÏÒÍÁÔÕ×ÁÔÉ ×Ó¦ ЦÄÒÏÚĦÌÉ, Ñ˦\n"
+"¦ÓÎÕ×ÁÌÉ ÒÁΦÛÅ. ÷É ÍÁ¤ÔŠצÄÆÏÒÍÁÔÕ×ÁÔÉ Ð¦ÄÒÏÚĦÌÉ, Ñ˦ ͦÓÔÑÔØ\n"
+"ÏÐÅÒÁæÊÎÕ ÓÉÓÔÅÍÕ (ÔÁ˦, ÑË \"/\", \"/usr\" ÞÉ \"/var\"), ÁÌÅ ×É ÎÅ ÍÁ¤ÔÅ\n"
+"ÆÏÒÍÁÔÕ×ÁÔÉ Ô¦ ÒÏÚĦÌÉ, Ñ˦ ͦÓÔÑÔØ ÄÁΦ, Ñ˦ ×É Â ÈÏÔ¦ÌÉ ÚÂÅÒÅÇÔÉ\n"
+"(ÔÉÐÏ×Ï ÃŠЦÄÒÏÚÄ¦Ì \"/home\").\n"
+"\n"
+"âÕÄØÔÅ Õ×ÁÖΦ Ú ×ÉÂÏÒÏÍ Ð¦ÄÒÏÚĦ̦×. ð¦ÓÌÑ ÆÏÒÍÁÔÕ×ÁÎÎÑ ×Ó¦ ÄÁΦ ÎÁ\n"
+"ЦÄÒÏÚĦÌÁÈ ÂÕÄÕÔØ ÓÔÅÒÔ¦ ¦ ×É ÎÅ ÚÍÏÖÅÔŠצÄÎÏ×ÉÔÉ Î¦ÞÏÇÏ Ú ÎÉÈ.\n"
+"\n"
+"ëÌÁÃΦÔØ ÎÁ \"çÁÒÁÚÄ\" ËÏÌÉ ×É ÇÏÔÏצ ÐÒÉÓÔÕÐÉÔÉ ÄÏ ÆÏÒÍÁÔÕ×ÁÎÎÑ\n"
+"ЦÄÒÏÚĦ̦×.\n"
+"\n"
+"ëÌÁÃΦÔØ ÎÁ \"÷¦ÄͦÎÉÔÉ\", ÑËÝÏ ×É ÈÏÞÅÔÅ ×ÉÂÒÁÔÉ ¦ÎÛ¦ ЦÄÒÏÚĦÌÉ ÄÌÑ\n"
+"ÔÏÇÏ, ÝÏ ×ÓÔÁÎÏ×ÉÔÉ ÎÏ×Õ ÓÉÓÔÅÍÕ íÁÎÄÒÅÊË ì¦ÎÁËÓ.\n"
+"\n"
+"îÁÔÉÓΦÔØ ÎÁ äÏÄÁÔËÏ×Ï, ÑËÝÏ ÷É ÈÏÞÅÔÅ ×ÉÂÒÁÔÉ Ð¦ÄÒÏÚĦÌÉ ÄÌÑ §ÈÎØϧ\n"
+"ÐÅÒÅצÒËÉ ÎÁ ¦ÓÎÕ×ÁÎÎÑ Ú¦ÊÎÉÈ ÂÌÏ˦×."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "æÒÁÎÃÕÚØËÁ"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "þÅÓØËÁ (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
#, fuzzy, c-format
-msgid "Local Network adress"
-msgstr "ÎÅ ÚÎÁÊÄÅÎÁ ÐÌÁÔÁ ÍÅÒÅÖ¦"
+msgid "Hardware probing in progress"
+msgstr "ÚÎÁÊÄÅÎÏ ÎÁ ÐÏÒÔÕ %s"
#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Net Device"
+msgstr "ðÒÉÎÔÅÒ ÓÅÒ×ÅÒ"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
+msgid "Summary"
+msgstr "úÁÇÁÌÏÍ"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "úͦÎÉÔÉ ËÏÎƦÇÕÒÁæÀ ÐÒÉÎÔÅÒÁ"
+msgid "Next"
+msgstr "ôÅËÓÔ"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, fuzzy, c-format
-msgid "Show current interface configuration"
-msgstr "úͦÎÉÔÉ ËÏÎƦÇÕÒÁæÀ ÐÒÉÎÔÅÒÁ"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "äÅ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÓÔÁÒÔÏ×ÉÊ ÂÌÏË?"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr ""
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Automatic reconfiguration"
-msgstr "á×ÔÏÍÁÔÉÞÎÁ ËÏÎƦ­ÕÒÁÃ¦Ñ CUPS"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Network interface already configured"
-msgstr "íÏΦÔÏÒ ÎÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÉÊ"
+#: ../../lang.pm:1
+#, c-format
+msgid "Puerto Rico"
+msgstr "ðÕÅÒÔÏò¦ËÏ"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-"÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÑËÉÊ ÁÄÁÐÔÅÒ ÍÅÒÅÖ¦ ÂÕÄŠЦÄËÌÀÞÅÎÏ ÄÏ ÌÏËÁÌØÎϧ\n"
-"ÍÅÒÅÖ¦."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "ìÉÔÏ×ÓØËÁ \"ÃÉÆÒÏ×ÉÊ ÒÑÄ\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÐÒÉÓÕÔÎ¦Ê Ô¦ÌØËÉ ÏÄÉÎ ÁÄÁÐÔÅÒ ÍÅÒÅÖ¦:\n"
-"\n"
-"%s\n"
-"\n"
-"úÁÒÁÚ ÂÕÄÅ ×ÓÔÁÎÏ×ÌÅÎÁ ÌÏËÁÌØÎÁ ÍÅÒÅÖÁ Ú ÃÉÍ ÁÄÁÐÔÅÒÏÍ."
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "¶ÎÔÅÒÆÅÊÓ ÍÅÒÅÖ¦"
+msgid "Anguilla"
+msgstr "áÎǦÌØÑ"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS Domain"
+msgstr "äÏÍÅÎ NIS"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
+"\n"
+"- User Files:\n"
msgstr ""
-"õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÓËÏÎƦ­ÕÒÏ×ÁÎÏÇÏ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦\n"
-"ethernet. óËÏÒÉÓÔÁÊÔÅÓØ, ÂÕÄØ-ÌÁÓËÁ, ÐÒÏÇÒÁÍÏÀ ÄÌÑ ËÏÎƦÇÕÒÁæ§\n"
-"ÁÐÁÒÁÔÎÉÈ ÚÁÓϦ×."
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦!"
+msgid "Antarctica"
+msgstr "áÎÔÁÒËÔÉËÁ"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "¶ÎÔÅÒÆÅÊÓ %s"
+msgid "Mount options"
+msgstr "ðÁÒÁÍÅÔÒÉ ÍÏÎÔÕ×ÁÎÎÑ:"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "¶ÎÔÅÒÆÅÊÓ %s (Ú ×ÉËÏÒÉÓÔÁÎÎÑÍ ÍÏÄÕÌÑ %s)"
+msgid "Jamaica"
+msgstr "ñÍÁÊËÁ"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Net Device"
-msgstr "ðÒÉÎÔÅÒ ÓÅÒ×ÅÒ"
-
-#: ../../standalone/drakgw:1
-#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
+"ðÏÓÔÁ×ÉÔÉ \"ÓÉÒ¦\" ÆÁÊÌÉ ÓÐÅæÁÌØÎÉÈ ÐÒÉÓÔÒÏ§× Õ ×¦ÄÐÏצÄΦÓÔØ ÄÏ\n"
+"ÂÌÏÞÎÉÈ ÐÒÉÓÔÒÏ§× (ÑË, ÎÁÐÒÉËÌÁÄ, ЦÄÒÏÚĦÌÉ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ) ÄÌÑ\n"
+"×ÉËÏÒÉÓÔÁÎÎÑ × ÐÒÏÇÒÁÍÁÈ ÐÏĦÂÎÉÈ ÄÏ Oracle."
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
+#: ../../security/help.pm:1
+#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"ôÅÐÅÒ Ð¦ÓÌÑ ÔÏÇÏ, ÑË ÐÁÒÁÍÅÔÒÉ ÷ÁÛÏÇÏ Ú'¤ÄÎÁÎÎÑ Ú ¶ÎÔÅÒÎÅÔÏÍ\n"
-"×ÓÔÁÎÏ×ÌÅΦ, ÷É ÍÏÖÅÔÅ ÓËÏƦ­ÕÒÕ×ÁÔÉ Ó×¦Ê ËÏÍÐ'ÀÔÅÒ ÔÁËÉÍ ÞÉÎÏÍ, ÝÏÂ\n"
-"צΠÄÏÚ×ÏÌÑ× ÓЦÌØÎÅ ×ÉËÏÒÉÓÔÁÎÎÑ Ó×ÏÇÏ Ú'¤ÄÎÁÎÎÑ ÄÏ\n"
-"¶ÎÔÅÒÎÅÔÕ. \n"
-"\n"
-"ðÒÉͦÔËÁ: ÷ÁÍ ÄÌÑ ÃØÏÇÏ ÐÏÔÒ¦ÂÎÏ ÍÁÔÉ ÐÌÁÔÕ ÍÅÒÅÖ¦, ÝÏ ÎÁÓÔÒϧÔÉ\n"
-"ÌÏËÁÌØÎÕ ÍÅÒÅÖÕ (LAN)."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "óЦÌØÎÅ ×ÉËÏÒÉÓÔÁÎÎ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
+msgid "Please wait, preparing installation..."
+msgstr "úÁÞÅËÁÊÔÅ, ¦ÄŠЦÄÇÏÔÏ×ËÁ ÕÓÔÁÎÏ×ËÉ"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÍÉËÎÅÎÅ"
+msgid "Czech (QWERTZ)"
+msgstr "þÅÓØËÁ (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "÷ÍÉËÁÀ ÓÅÒ×ÅÒÉ..."
+msgid "Track network card id (useful for laptops)"
+msgstr ""
+"úÁÐÉÓÁÔÉ id ÐÌÁÔÉ ÍÅÒÅÖ¦ (ÍÏÖÅ ÚÎÁÄÏÂÉÔØÓÑ ÐÒÉ ËÏÒÉÓÔÕ×ÁÎΦ ÍϦÌØÎÉÍ "
+"ËÏÍÐ'ÀÔÅÒÏÍ)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "dismiss"
-msgstr "ÐÒÉÂÒÁÔÉ"
+msgid "The port number should be an integer!"
+msgstr "îÏÍÅÒ ÐÏÒÔÁ ÍÁ¤ ÂÕÔÉ Ã¦ÌÉÍ ÞÉÓÌÏÍ!"
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "reconfigure"
-msgstr "ÐÅÒÅÎÁÓÔÒϧÔÉ"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "You must choose an image file first!"
+msgstr "÷×ÅĦÔØ URI ÐÒÉÓÔÒÏÀ ÐÒÉÎÔÅÒÁ"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore from Hard Disk."
+msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÄÉÓËÅÔÉ"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "enable"
-msgstr "ÄÏÚ×ÏÌÉÔÉ"
+msgid "Add to LVM"
+msgstr "äÏÄÁÔÉ ÄÏ LVM"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"õÓÔÁÎÏ×ËÁ ÓЦÌØÎÏÇÏ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÖÅ\n"
-"ÚÒÏÂÌÅÎÁ. óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ × ÄÁÎÉÊ ÍÏÍÅÎÔ ×ÉÍËÎÅÎÅ.\n"
-"\n"
-"ýÏ ÷É ÂÁÖÁ¤ÔÅ ÚÒÏÂÉÔÉ?"
+#: ../../network/network.pm:1
+#, c-format
+msgid "DNS server"
+msgstr "óÅÒ×ÅÒ DNS"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÉÍËÎÅÎÅ"
+msgid "Trinidad and Tobago"
+msgstr "ôҦΦÄÁÄ ÔÁ ôÏÂÁÇÏ"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÉÍËÎÅÎÅ"
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD ÔÁ LPRng ΊЦÄÔÒÉÍÕÀÔØ ÐÒÉÎÔÅÒÉ IPP.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "úÁÂÏÒÏÎÁ ÓÅÒ×ÅÒ¦×..."
+msgid "simple"
+msgstr "ÐÒÏÓÔÉÊ"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "disable"
-msgstr "ÚÁÂÏÒÏÎÉÔÉ"
+msgid "Clear all"
+msgstr "ïÞÉÓÔÉÔÉ ×ÓÅ"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"õÓÔÁÎÏ×ËÁ ÓЦÌØÎÏÇÏ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÖÅ\n"
-"ÚÒÏÂÌÅÎÁ. óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ × ÄÁÎÉÊ ÍÏÍÅÎÔ ÄÏÚ×ÏÌÅÎÅ.\n"
-"\n"
-"ýÏ ÷É ÂÁÖÁ¤ÔÅ ÚÒÏÂÉÔÉ?"
+msgid "No test pages"
+msgstr "îÅÍÁ¤ ÔÅÓÔÏ×ÉÈ ÓÔÏÒ¦ÎÏË"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÍÉËÎÅÎÅ"
+msgid "Adapter %s: %s"
+msgstr "ðÌÁÔÁ %s: %s"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr ""
+msgid "Falkland Islands (Malvinas)"
+msgstr "æÏÌËÌÅÎÄÓØ˦ ÏÓÔÒÏ×É (íÁÌØצÎÓØ˦)"
-#: ../../standalone/drakhelp:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr ""
+msgid "Unknown model"
+msgstr "îÅצÄÏÍÁ ÍÏÄÅÌØ"
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Path"
+msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "group :"
-msgstr "òÏÂÏÞÁ ÇÒÕÐÁ"
+msgid "authentication"
+msgstr "á×ÔÅÎÔÉËÁæÑ"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "user :"
-msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
+msgid "Backup Now"
+msgstr "õÓÔÁÎÏ×ËÁ ÆÁÊÌ. ÓÉÓÔÅÍ"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Path selection"
-msgstr "úÂÅÒÅÇÔÉ ×ÉÂ¦Ò ÐÁËÅÔ¦×"
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "/_File"
+msgstr "/æÁÊÌ"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Use group id for execution"
-msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Use owner id for execution"
-msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
-
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
msgstr ""
+"úÁÐÕÓËÁ¤ ÍÅÈÁΦÚÍ Æ¦ÌØÔÒÕ×ÁÎÎÑ ÐÁËÅÔ¦× ÄÌÑ ÑÄÒÁ 2.2 ì¦ÎÁËÓÁ, ÄÌÑ ÔÏÇÏ\n"
+"ÝÏ ÍÁÔÉ ÚÁÈÉÓÔ ÔÉÐÕ firewall ÎÁ ×ÁÛ¦Ê ÓÉÓÔÅͦ."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Set-GID"
+msgid "Tamil (ISCII-layout)"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set-UID"
-msgstr ""
+msgid "Mayotte"
+msgstr "íÁÊÏÔÔ"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr ""
+msgid "Creating auto install floppy..."
+msgstr "óÔ×ÏÒÅÎÎÑ Á×ÔÏÕÓÔÁÎÏ×ÏÞÎϧ ÄÉÓËÅÔÉ"
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Property"
-msgstr "ðÏÒÔ"
+msgid "Searching for scanners ..."
+msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, fuzzy, c-format
-msgid "Permissions"
-msgstr "÷ÅÒÓ¦Ñ: %s\n"
+msgid "Partitioning"
+msgstr "äÒÕË"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Current user"
-msgstr "ðÒÉÊÎÑÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
+msgid "Russia"
+msgstr "òÏÓ¦ÊÓØËÁ"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "browse"
-msgstr ""
+msgid "ethernet card(s) detected"
+msgstr "ÚÎÁÊÄÅÎÏ ÐÌÁÔÁ (É) Ethernet "
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Syslog"
+msgstr "syslog"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Edit current rule"
+msgid "Can't create catalog!"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "edit"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Delete selected rule"
-msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "delete"
-msgstr "óÔÅÒÔÉ"
-
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, fuzzy, c-format
-msgid "Add a new rule at the end"
-msgstr "äÏÄÁÔÉ ÐÒÉÎÔÅÒ"
+msgid "Not enough free space for auto-allocating"
+msgstr "îÅÄÏÓÔÁÔÎØÏ ×¦ÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ ÄÌÑ Á×ÔÏÍÁÔÉÞÎÏÇÏ ÐÏĦÌÕ"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "add a rule"
-msgstr "äÏÄÁÔÉ ÍÏÄÕÌØ"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Set root password"
+msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÐÁÒÏÌØ root'Á"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Move selected rule down one level"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Down"
-msgstr "úÁ˦ÎÞÅÎÏ"
-
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move selected rule up one level"
+msgid "After resizing partition %s, all data on this partition will be lost"
msgstr ""
+"ð¦ÓÌÑ ÚͦÎÉ ÒÏÚͦÒÕ Ð¦ÄÒÏÚĦÌÕ %s, ×Ó¦ ÄÁΦ ÎÁ ÃØÏÍÕ Ð¦ÄÒÏÚĦ̦ ÂÕÄÕÔØ\n"
+"×ÔÒÁÞÅΦ"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Up"
-msgstr ""
+msgid "Internet connection configuration"
+msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "select perm file to see/edit"
+msgid "Scanning for TV channels"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
+msgid "Kernel:"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "permissions"
-msgstr "ЦÄÒÏÚÄ¦Ì %s"
+msgid "/_About..."
+msgstr "/ð¦ÄËÁÚËÁ/ðÒÏ..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "group"
-msgstr "òÏÂÏÞÁ ÇÒÕÐÁ"
+msgid "Bengali"
+msgstr "ÄÏÚ×ÏÌÉÔÉ"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "user"
-msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Preference: "
+msgstr "õÓÔÁÎÏ×ËÉ: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "path"
+msgid "Wizard..."
+msgstr "ðÏͦÞÎÉË..."
+
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#, c-format
+msgid "Services: %d activated for %d registered"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
+#, c-format
+msgid "Create a bootdisk"
+msgstr "óÔ×ÏÒÉÔÉ Á×ÁÒ¦ÊÎÕ ÄÉÓËÅÔÕ"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Solomon Islands"
+msgstr "óÏÌÏÍÏÎÏצ ÏÓÔÒÏ×É"
+
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "(module %s)"
+msgstr "(ÍÏÄÕÌØ %s)"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Workgroup"
+msgstr "òÏÂÏÞÁ ÇÒÕÐÁ"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "óÔ×ÏÒÅÎÎÑ Á×ÔÏÕÓÔÁÎÏ×ÏÞÎϧ ÄÉÓËÅÔÉ"
+msgid "Printer host name or IP"
+msgstr "îÁÚ×Á ÈÏÓÔÁ ÐÒÉÎÔÅÒÁ"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
+msgid "Host Path or Module"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
+msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""
+"îÁÚ×Á ÐÒÉÎÔÅÒÁ ÍÁ¤ ÓËÌÁÄÁÔÉÓÑ Ô¦ÌØËÉ Ú Ì¦ÔÅÒ, ÃÉÆÒ ÔÁ ÓÉÍ×ÏÌÁ ЦÄËÒÅÓÌÅÎÎÑ."
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "No image found"
-msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
+msgid "Show current interface configuration"
+msgstr "úͦÎÉÔÉ ËÏÎƦÇÕÒÁæÀ ÐÒÉÎÔÅÒÁ"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
+#, c-format
+msgid "Development"
+msgstr "òÏÚÒÏÂÎÉË"
+
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Done"
+msgstr "úÁ˦ÎÞÅÎÏ"
+
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "Xpmac (ÄÒÁÊ×ÅÒ ÄÉÓÐÌÅÑ ÄÌÑ ÕÓÔÁÎÏ×ËÉ)"
+msgid "Web Server"
+msgstr "óÅÒ×ÅÒ"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
+msgid "\tDo not include System Files\n"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "The DHCP end ip"
-msgstr ""
+msgid "Chile"
+msgstr "þ¦Ì¦"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The DHCP start ip"
+msgid ""
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "¶ÎÔÅÒÆÅÊÓ %s (Ú ×ÉËÏÒÉÓÔÁÎÎÑÍ ÍÏÄÕÌÑ %s)"
+#: ../../any.pm:1
+#, c-format
+msgid "(already added %s)"
+msgstr "(×ÖÅ ÓÔ×ÏÒÅÎÉÊ %s)"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", using command %s"
msgstr ""
-"÷ÉÂÅÒ¦ÔØ ÑËÕ ÐÌÁÔÕ ÍÅÒÅÖ¦ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÁÔÉ ÄÌÑ Ú'¤ÄÎÁÎÎÑ Ú\n"
-"¶ÎÔÅÒÎÅÔÏÍ"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Alt and Shift keys simultaneously"
msgstr ""
-"ôÅÐÅÒ Ð¦ÓÌÑ ÔÏÇÏ, ÑË ÐÁÒÁÍÅÔÒÉ ÷ÁÛÏÇÏ Ú'¤ÄÎÁÎÎÑ Ú ¶ÎÔÅÒÎÅÔÏÍ\n"
-"×ÓÔÁÎÏ×ÌÅΦ, ÷É ÍÏÖÅÔÅ ÓËÏƦ­ÕÒÕ×ÁÔÉ Ó×¦Ê ËÏÍÐ'ÀÔÅÒ ÔÁËÉÍ ÞÉÎÏÍ, ÝÏÂ\n"
-"צΠÄÏÚ×ÏÌÑ× ÓЦÌØÎÅ ×ÉËÏÒÉÓÔÁÎÎÑ Ó×ÏÇÏ Ú'¤ÄÎÁÎÎÑ ÄÏ\n"
-"¶ÎÔÅÒÎÅÔÕ. \n"
-"\n"
-"ðÒÉͦÔËÁ: ÷ÁÍ ÄÌÑ ÃØÏÇÏ ÐÏÔÒ¦ÂÎÏ ÍÁÔÉ ÐÌÁÔÕ ÍÅÒÅÖ¦, ÝÏ ÎÁÓÔÒϧÔÉ\n"
-"ÌÏËÁÌØÎÕ ÍÅÒÅÖÕ (LAN)."
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Flags"
+msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦"
+msgid "Add/Del Users"
+msgstr "äÏÄÁÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security options..."
-msgstr "úÁÞÅËÁÊÔÅ, ¦ÄŠЦÄÇÏÔÏ×ËÁ ÕÓÔÁÎÏ×ËÉ"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Host/network IP address missing."
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security level..."
-msgstr "÷ÓÔÁÎÏ×ÌÅÎÎÑ Ò¦×ÎÑ ÂÅÚÐÅËÉ"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "weekly"
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Periodic Checks"
+msgid "Settings"
+msgstr "ðÁÒÁÍÅÔÒÉ"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The entered host/network IP is not correct.\n"
msgstr ""
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "System Options"
-msgstr "ïÐæ§ ÍÏÄÕÌÑ:"
+msgid "Here is the full list of available countries"
+msgstr "ôÕÔ ÎÁ×ÅÄÅÎÏ ÐÏ×ÎÉÊ ÓÐÉÓÏË ÎÁÑ×ÎÉÈ ËÌÁצÁÔÕÒ"
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Network Options"
-msgstr "ïÐæ§ ÍÏÄÕÌÑ:"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "äÏÄÁÔËÏ×Á ÔÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ (A4)"
-#: ../../standalone/draksec:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
+"ñËÝÏ ÷É ÍÁ¤ÔÅ ×Ó¦ ËÏÍÐÁËÔ-ÄÉÓËÉ Ú ÐÏÄÁÎÉÈ ×ÉÝÅ, ÎÁÔÉÓΦÔØ ÎÁ \"çÁÒÁÚÄ\".\n"
+"ñËÝÏ ÷É ÎÅ ÍÁ¤ÔÅ ÖÏÄÎÏÇÏ Ú ÐÏÄÁÎÉÈ ×ÉÝÅ, ÎÁÔÉÓΦÔØ ÎÁ \"÷¦ÄͦÎÉÔÉ\".\n"
+"ñËÝÏ Ô¦ÌØËÉ ÄÅÑËÉÈ ËÏÍÐÁËÔ-ÄÉÓË¦× ÎÅ ×ÉÓÔÁÞÁ¤, צÄͦΦÔØ §È ×ɦÒ, ¦\n"
+"ÎÁÔÉÓΦÔØ \"çÁÒÁÚÄ\" ЦÓÌÑ ÃØÏÇÏ.\" "
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Administrator:"
-msgstr "ïÐæ§ צÄÄÁÌÅÎÏÇÏ ÐÒÉÎÔÅÒÁ"
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Wait please"
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Alerts:"
-msgstr "÷ÓÔÁÎÏ×ÌÅÎÎÑ Ò¦×ÎÑ ÂÅÚÐÅËÉ"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Security Level:"
-msgstr "÷ÓÔÁÎÏ×ÌÅÎÎÑ Ò¦×ÎÑ ÂÅÚÐÅËÉ"
+msgid "Backup user files"
+msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr " (ïÓÎÏ×ÎÁ)"
+msgid "New"
+msgstr "ÎÏ×ÉÊ"
-#: ../../standalone/draksec:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
+"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
+"\n"
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"îÁÓÔÕÐÎÅ - ÎÁʦÌØÛ ×ÁÛÌÉ×ÉÊ ËÒÏË Ú ÔÏÞËÉ ÚÏÒÕ ÂÅÚÐÅËÉ ÷ÁÛϧ ÓÉÓÔÅÍÉ\n"
+"GNU/Linux: ×ÉÂ¦Ò ÐÁÒÏÌÑ ÄÌÑ ËÏÒÉÓÔÕ×ÁÞÁ Root. Root - ÃÅ ÓÉÓÔÅÍÎÉÊ\n"
+"ÁÄͦΦÓÔÒÁÔÏÒ ¦ ¤ÄÉÎÁ ÏÓÏÂÁ, ÑË¦Ê ÄÏÚ×ÏÌÅÎÏ ÒÏÂÉÔÉ ÐÏÎÏ×ÌÅÎÎÑ ÓÉÓÔÅÍÉ,\n"
+"ÄÏÄÁ×ÁÔÉ ËÏÒÉÓÔÕ×ÁÞ¦×, ÚͦÎÀ×ÁÔÉ ÚÁÇÁÌØÎÕ ËÏÎƦ­ÕÒÁæÀ ÓÉÓÔÅÍÉ, ÔÁËÅ\n"
+"¦ÎÛÅ. ëÏÒÏÔÛÅ - Root ÍÏÖÅ ×ÓÅ! ïÓØ ÞÏÍÕ ÷ÁÍ ÓÌ¦Ä ×ÉÂÉÒÁÔÉ ÐÁÒÏÌØ, ÑËÉÊ\n"
+"×ÁÖËÏ ×ÇÁÄÁÔÉ, drakX ÓËÁÖÅ ÷ÁÍ, ÑËÝÏ ÐÁÒÏÌØ ÚÁÎÁÄÔÏ ÌÅÇËÉÊ. ñË\n"
+"ÐÏËÁÚÁÎÏ, ÷ÁÍ ÎÅÏÂÏ×'ÑÚËÏ×Ï ××ÏÄÉÔÉ ÐÁÒÏÌØ, ÁÌÅ ÍÉ ÎÁÓÔ¦ÊÌÉ×Ï\n"
+"ÒÅËÏÍÅÎÄÕ¤ÍÏ ÷ÁÍ ×ÓÅ-ÔÁËÉ ×ÉÂÒÁÔÉ ÐÁÒÏÌØ, ÈÏÞÁ Â Ú ÏÄΦ¤§-¤ÖÉÎϧ\n"
+"ÐÒÉÞÉÎÉ: ÎÅ ÄÕÍÁÊÔÅ, ÝÏ ÞÅÒÅÚ ÔÅ, ÝÏ ÷É ÚÁ×ÁÎÔÁÖÉÌÉ GNU/Linux, ÷ÁÛÁ\n"
+"ÓÉÓÔÅÍÁ צÌØÎÁ ×¦Ä ÐÏÍÉÌÏË. ãÅ ÎÅ ÔÁË, ÏÓ˦ÌØËÉ Root ÍÏÖÅ ÐÅÒÅ×ÁÖÉÔÉ\n"
+"×Ó¦ ÚÁÂÏÒÏÎÉ ¦ ÎÅÎÁÒÏËÏÍ ÓÔÅÒÔÉ ×Ó¦ ÄÁΦ ÎÁ ×ÓÉÈ Ð¦ÄÒÏÚĦÌÁÈ\n"
+"Ú×ÅÒÔÁÀÞÉÓØ ÂÅÚÐÏÓÅÒÅÄÎØÏ ÄÏ Ð¦ÄÒÏÚĦ̦×! ôÏÍÕ, ÄÏÓÔÕÐ ÄÏ ÒÁÈÕÎËÕ root\n"
+"ÍÁ¤ ÂÕÔÉ ÚÁÈÉÝÅÎÉÍ.\n"
"\n"
+"ðÁÒÏÌØ ÍÁ¤ ÂÕÔÉ ÓÕͦÛÛÀ ÁÌÆÁצÔÎÏ-ÃÉÆÒÏ×ÉÈ ÓÉÍ×ÏÌ¦× ¦ ÂÕÔÉ ÚÁ×ÄÏ×ÖËÉ\n"
+"ÈÏÞÁ- 8 ÓÉÍ×Ï̦×. î¦ËÏÌÉ ÎÅ ÚÁÐÉÓÕÊÔÅ ÐÁÒÏÌØ!\n"
"\n"
+"îÅ ×ÉÂÉÒÁÊÔÅ ÚÁÎÁÄÔÏ ÄÏ×ÇÉÊ ÞÉ ÓËÌÁÄÎÉÊ ÐÁÒÏÌØ. ÷ÁÍ ÊÏÇÏ\n"
+"ÚÁÐÁÍ'ÑÔÏ×Õ×ÁÔÉ.\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
-msgstr ""
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
+"ëÏÌÉ ÷É ÂÕÄÅÔÅ ÄÒÕËÕ×ÁÔÉ ÐÁÒÏÌØ ÎÁ ÅËÒÁΦ, ÊÏÇÏ ÎÅ ÂÕÄÅ ×ÉÄÎÏ. ïÓØ\n"
+"ÞÏÍÕ ÐÒÉ ×ÉÂÏÒ¦ ÐÁÒÏÌÑ, ÷ÁÍ ÚÁÐÒÏÐÏÎÕ¤ÔØÓÑ ××ÅÓÔÉ ÊÏÇÏ Äצަ, ÏÓ˦ÌØËÉ\n"
+"ÐÏÍÉÌËÁ ÐÒÉ ÐÅÒÛÏÍÕ ××ÅÄÅÎΦ ÐÁÒÏÌÑ, ÍÏÖÅ ÂÕÔÉ ÐÒÏÂÌÅÍÏÀ: ÐÒÉ\n"
+"ÒŤÓÔÒÁæ§ × ÓÉÓÔÅͦ ÷ÁÍ ÔÒÅÂÁ ÂÕÄÅ ËÏÒÉÓÔÕ×ÁÔÉÓØ \"ÎÅצÒÎÉÍ\" ÐÁÒÏÌÅÍ.\n"
"\n"
+"÷ ÅËÓÐÅÒÔÎÏÍÕ ÒÅÖÉͦ, Õ ÷ÁÓ ÂÕÄÅ ÍÏÖÌÉצÓÔØ ×ËÁÚÁÔÉ, ÞÉ ÷É ÂÕÄÅÔÅ\n"
+"ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÑËÉÍ-ÎÅÂÕÄØ ÓÅÒ×ÅÒÏÍ Á×ÔÅÎÔÉËÁæ§: NIS ÞÉ LDAP.\n"
"\n"
-"You can visit our hardware database at:\n"
+"ñËÝÏ ÷É ËÏÒÉÓÔÕ¤ÔÅÓØ NIS'ÏÍ (ÞÉ LDAP) ×ÉÂÅÒ¦ÔØ ÏÐæÀ \"ëÏÒÉÓÔÕ×ÁÔÉÓØ\n"
+"NIS'ÏÍ\" (\"LDAP\"). ñËÝÏ ÷É ÎÅ ÚÎÁ¤ÔÅ ÃØÏÇÏ, ÚÁÐÉÔÁÊÔÅ × Ó×ÏÇÏ\n"
+"ÓÉÓÔÅÍÎÏÇÏ ÁÄͦΦÓÔÒÁÔÏÒÁ.\n"
"\n"
+"ñËÝÏ ËÏÍÐ'ÀÔÅÒ ÎŠЦÄËÌÀÞÅÎÉÊ ÄÏ ÍÅÒÅÖ¦, ×ÉÂÅÒ¦ÔØ ìÏËÁÌØΦ ÆÁÊÌÉ ÄÌÉ\n"
+"Á×ÔÅÎÔÉËÁæ§.."
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
+"ôÅÐÅÒ ÞÁÓ ×ÉÂÒÁÔÉ Ò¦×ÅÎØ ÄÏÓÔÕÐÕ (ÂÅÚÐÅËÉ) ÄÌÑ ÷ÁÛϧ ÓÉÓÔÅÍÉ. úÏÌÏÔÅ\n"
+"ÐÒÁ×ÉÌÏ: ÞÉÍ ÛÉÒÛÅ ËÏÌÏ ÄÏÓÔÕÐÕ ÍÁ¤ ÍÁÛÉÎÁ, ¦ ÞÉÍ ×ÁÖÌÉצۦ ÄÁΦ, ÝÏ ×\n"
+"Î¦Ê ÚÂÅÒ¦ÇÁÀÔØÓÑ, ÔÉÍ ×ÉÝÉÍ ÍÁ¤ ÂÕÔÉ Ò¦×ÅÎØ ÂÅÚÐÅËÉ ÓÉÓÔÅÍÉ. áÌÅ ×\n"
+"¦ÌØÛÏÓÔ¦ ×ÉÐÁÄ˦×, ×ÉÝÉÊ Ò¦×ÅÎØ ÂÅÚÐÅËÉ ÄÏÓÑÇÁ¤ÔØÓÑ ÚÁ ÒÁÈÕÎÏË\n"
+"ÄÏÄÁÔËÏ×ÉÈ ÎÅÚÒÕÞÎÏÓÔÅÊ × ËÏÒÉÓÔÕ×ÁÎΦ. äÏÄÁÔËÏ×Õ ¦ÎÆÏÒÍÁæÀ Ú ÃØÏÇÏ\n"
+"ÐÉÔÁÎÎÑ ÍÏÖÎÁ ÏÔÒÉÍÁÔÉ Ú ÓÅËæ§ MSEC × äÏצÄËÏ×ÏÍÕ ðÏÓ¦ÂÎÉËÕ.\n"
+"\n"
+"ñËÝÏ ÷É ÎÅ ÚÎÁ¤ÔÅ, ÎÁ ÞÏÍÕ ÚÕÐÉÎÉÔÉÓØ, ÚÁÌÉÛÔÅ ×ÓÅ ÑË ¤."
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Load from floppy"
+msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÄÉÓËÅÔÉ"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "No Sound Card detected!"
-msgstr "îÅÍÁ¤ Ú'¤ÄÎÁÎÎÑ"
+msgid "The following printer was auto-detected. "
+msgstr "㦠ÐÁËÅÔÉ ÂÕÄÕÔØ ÄŦÎÓÔÁÌØÏ×ÁÎÉÍÉ"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "%s BootSplash (%s) preview"
+msgid "Boot Floppy"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Generating preview ..."
-msgstr "÷ÉÚÎÁÞÁÀ ÐÒÉÓÔÒϧ..."
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "You must choose an image file first!"
-msgstr "÷×ÅĦÔØ URI ÐÒÉÓÔÒÏÀ ÐÒÉÎÔÅÒÁ"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Norwegian"
+msgstr "îÏÒ×ÅÚØËÁ"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "ProgressBar color selection"
-msgstr "÷ÉÂ¦Ò ÍÏÄÅ̦ ÐÒÉÎÔÅÒÁ"
+msgid "Searching for new scanners ..."
+msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
+msgid "Apache World Wide Web Server"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "saving Bootsplash theme..."
+msgid "stepping of the cpu (sub model (generation) number)"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image file"
-msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
-
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "choose image"
-msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
+msgid "select path to restore (instead of /)"
+msgstr "ñËÉÊ ÔÉÐ ÍÉÛ¦ ×É ÍÁ¤ÔÅ?"
#: ../../standalone/draksplash:1
#, fuzzy, c-format
msgid "Configure bootsplash picture"
msgstr "îÁÓÔÒϧÔÉ ÓÅÒצÓÉ"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Make kernel message quiet by default"
-msgstr ""
+msgid "China"
+msgstr "ëÉÔÁÊ"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr "÷ÉÂÅÒ¦ÔØ ÄÏ ÑËÏÇÏ ÐÏÓ̦ÄÏ×ÎÏÇÏ ÐÏÒÔÁ ЦÄËÌÀÞÅÎÉÊ ÷ÁÛ ÍÏÄÅÍ?"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Display logo on Console"
-msgstr ""
+msgid "Georgia"
+msgstr "çÒÕÚ¦Ñ"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, fuzzy, c-format
-msgid "Choose color"
-msgstr "÷ÉÂÅÒ¦ÔØ ÔÉÐ ÍÏΦÔÏÒÕ"
+msgid "Reading data of installed printers..."
+msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Save theme"
-msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ"
+msgid " Erase Now "
+msgstr "ðÅÒÅÎÅÓÔÉ"
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Preview"
-msgstr "ÐÒÉÓÔÒ¦Ê"
+#: ../../fsedit.pm:1
+#, c-format
+msgid "server"
+msgstr "ÓÅÒ×ÅÒ"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "the color of the progress bar"
-msgstr ""
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "÷ÓÔÁ×ÔÅ ÄÉÓËÅÔÕ ×¦ÄÆÏÒÍÁÔÏ×ÁÎÕ Õ FAT × ÄÉÓËÏ×¦Ä %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "the height of the progress bar"
+msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "the width of the progress bar"
-msgstr ""
+msgid "Please Wait... Applying the configuration"
+msgstr "úÁÞÅËÁÊÔÅ, ÂÕÄØ ÌÁÓËÁ. ôÅÓÔÕ×ÁÎÎÑ ËÏÎƦ­ÕÒÁæ§"
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Laskavo prosymo do prohramy vyboru operacijnoyi systemy GRUB!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "text box height"
+msgid "SCSI controllers"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "text width"
+msgid " on LPD server \"%s\", printer \"%s\""
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
+msgid "Choosing a display manager"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Zeroconf Host name"
+msgstr "îÁÚ×Á ÈÏÓÔÁ"
+
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP ÁÄÒÅÓÁ ÍÁ¤ ÂÕÔÉ Õ ÆÏÒÍÁÔ¦ 1.2.3.4"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Browse"
-msgstr ""
+msgid "Ecuador"
+msgstr "åË×ÁÄÏÒ"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Theme name"
-msgstr "îÁÚ×Á ÒÅÓÕÒÓÕ"
+msgid "Add an item"
+msgstr "äÏÄÁÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "final resolution"
-msgstr "òÏÚĦÌØÎÁ ÚÄÁÔΦÓÔØ"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The printers on this machine are available to other computers"
+msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "first step creation"
-msgstr "ÓÔ×ÏÒÅÎÎÑ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÏÇÏ ÄÉÓËÕ"
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "I can't find needed image file `%s'."
+msgstr "îÅ ÍÏÖÕ ÚÎÁÊÔÉ ÐÏÔÒ¦ÂÎÉÊ ÆÁÊÌ ¦Ú ÚÏÂÒÁÖÅÎÎÑÍ `%s'"
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "No TV Card detected!"
-msgstr ""
+msgid "Shell"
+msgstr "ëÏÍÁÎÄÎÁ ÏÂÏÌÏÎËÁ"
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
+msgid "PCI"
+msgstr "PCI"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Sao Tome and Principe"
+msgstr "óÁÎ-ôÏÍÅ ¦ ðÒ¦ÎӦЦ"
+
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Can't login using username %s (bad password?)"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Have a nice day!"
+msgid "Azerbaidjani (latin)"
+msgstr "áÚÅÒÂÁÊÄÖÁÎÓØËÁ (ÌÁÔÉÎÁ)"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Package not installed"
+msgstr "÷ÉÊÔÉ Ú ÕÓÔÁÎÏ×ËÉ"
+
+#: ../../share/advertising/12-mdkexpert.pl:1
+#, fuzzy, c-format
+msgid "Become a MandrakeExpert"
+msgstr "ÅËÓÐÅÒÔ"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "American Samoa"
+msgstr "áÍÅÒÉËÁÎÓØËÁ óÁÍÏÁ"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Protocol"
+msgstr "ðÒÏÔÏËÏÌ"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Copy fonts on your system"
+msgstr "õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦!"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Harddrake help"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "XawTV isn't installed!"
+msgid "Bogomips"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "óÔÁÌÁÓÑ ÐÏÍÉÌËÁ Ð¦Ä ÞÁÓ ÕÓÔÁÎÏ×ËÉ ÐÁËÅÔ¦×: "
+msgid "Mandrake Terminal Server Configuration"
+msgstr "ðÅÒÅÎ¦Ó ËÏÎƦÇÕÒÁæ§ ÐÒÉÎÔÅÒ¦× "
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Scanning for TV channels"
+msgid ""
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
+msgid "Restore all backups"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Area:"
+msgid "if set to yes, check open ports."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "TV norm:"
+msgid "This may take a moment to erase the media."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "You can't select/unselect this package"
+msgstr "îÅ ÍÏÖÎÁ ×ÉÂÒÁÔÉ ÁÂÏ ×¦ÄͦÎÉÔÉ ×ÉÂ¦Ò ÃØÏÇÏ ÐÁËÅÔÕ."
+
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
+#, c-format
+msgid "Warning"
+msgstr "ðÏÐÅÒÅÄÖÅÎÎÑ"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please,\n"
-"type in your tv norm and country"
+"\n"
+"- Other Files:\n"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Australian Optus cable TV"
-msgstr ""
+msgid "Remote host name"
+msgstr "îÁÚ×Á צÄÄÁÌÅÎÏÇÏ ÈÏÓÔÁ"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Newzealand"
+msgid "deactivate now"
+msgstr "ÄÅÁËÔÉצÚÕ×ÁÔÉ ÚÁÒÁÚ"
+
+#: ../../any.pm:1
+#, c-format
+msgid "access to X programs"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "France [SECAM]"
-msgstr "æÒÁÎæÑ"
+msgid "Computing the size of the Windows partition"
+msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ×¦ÌØÎÉÊ ÐÒÏÓÔ¦Ò ÎÁ ЦÄÒÏÚĦ̦ Windows"
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "East Europe"
-msgstr "´×ÒÏÐÁ"
+msgid "Italy"
+msgstr "¶ÔÁ̦ÊÓØËÁ"
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "West Europe"
-msgstr "´×ÒÏÐÁ"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Name of printer"
+msgstr "îÁÚ×Á ÐÒÉÎÔÅÒÁ"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "China (broadcast)"
-msgstr ""
+msgid "disable"
+msgstr "ÚÁÂÏÒÏÎÉÔÉ"
-#: ../../standalone/drakxtv:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Japan (cable)"
-msgstr ""
+msgid "error unmounting %s: %s"
+msgstr "ÐÏÍÉÌËÁ ÒÏÚÍÏÎÔÕ×ÁÎÎÑ %s: %s"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Japan (broadcast)"
+msgid "Do it!"
+msgstr "÷ÉËÏÎÁÔÉ!"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Cayman Islands"
+msgstr "ëÁÊÍÁÎÓØ˦ ÏÓÔÒÏ×É"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "%s not responding"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Canada (cable)"
-msgstr "ëÁÎÁÄÓØËÁ (ë×ÅÂÅË)"
+msgid "Select model manually"
+msgstr "îÁÚ×Á צÄÄÁÌÅÎÏÇÏ ÐÒÉÎÔÅÒ"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr ""
+msgid "Format"
+msgstr "æÏÒÍÁÔÕ×ÁÔÉ"
-#: ../../standalone/drakxtv:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "USA (cable)"
+msgid ""
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
+"îÁʦÌØÛ ÐÏÛÉÒÅÎÉÊ ÓÐÏӦ Ú'¤ÄÎÁÎÎÑ ÞÅÒÅÚ adsl - ÃÅ ÚÁ ÄÏÐÏÍÏÇÏÀ\n"
+"pppoe. ïÄÎÁË, ÄÅÑ˦ Ú'¤ÄÎÁÎÎÑ ËÏÒÉÓÔÕÀÔØÓÑ Ô¦ÌØËÉ pptp, ÎÅ×ÅÌÉËÁ\n"
+"˦ÌØ˦ÓÔØ ËÏÒÉÓÔÕ¤ÔØÓÑ dhcp. ñËÝÏ ÷É ÎÅ ÚÎÁ¤ÔÅ ÎÁÐÅ×ÎÅ ×ÉÂÅÒ¦ÔØ\n"
+"\"×ÖÉ×ÁÔÉ pppoe\"."
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "USA (broadcast)"
+msgid "Various"
+msgstr "ò¦ÚÎÏÍÁΦÔÎÅ"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Zip"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
"\n"
"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "primary"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
+"\n"
+"ðÏÚÎÁÞÔÅ ÐÒÉÎÔÅÒÉ ÄÌÑ ÐÅÒÅÎÏÓÕ ¦ ÎÁÔÉÓΦÔØ ÎÁ \"ðÅÒÅÎÅÓÔÉ\"."
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "secondary"
-msgstr "%d ÓÅËÕÎÄ"
+#: ../../printer/data.pm:1
+#, c-format
+msgid "PDQ"
+msgstr "PDQ"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr ""
+msgid "Albanian"
+msgstr "áÌÂÁÎÓØËÁ"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown"
-msgstr "îÅצÄÏÍÁ ÍÏÄÅÌØ"
+#: ../../lang.pm:1
+#, c-format
+msgid "Lithuania"
+msgstr "ìÉÔ×Á"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "unknown"
-msgstr "îÅצÄÏÍÁ ÍÏÄÅÌØ"
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "ëÏÍÐÁËÔÎÉÊ"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Running \"%s\" ..."
-msgstr "óÔÉÒÁÀ ÐÒÉÎÔÅÒ \"%s\" ..."
+msgid "Detected model: %s %s"
+msgstr "ÚÎÁÊÄÅÎÏ %s"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Run config tool"
+msgid "MandrakeSoft has selected the best software for you"
msgstr ""
#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Configure module"
-msgstr "óËÏÎƦÇÕÒÕÊÔÅ ÍÉÛÕ"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Information"
-msgstr "ðÏËÁÚ ¦ÎÆÏÒÍÁæ§"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Detected hardware"
-msgstr "ðÅÒÅÇÌÑÎØÔÅ ¦ÎÆÏÒÍÁæÀ ÐÒÏ ÁÐÁÒÁÔÎÅ ÚÁÂÅÚÐÅÞÅÎÎÑ"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Harddrake2 version "
-msgstr "÷ÉÚÎÁÞÅÎÎÑ ÔÉÐÕ ÄÉÓËÕ"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Detection in progress"
-msgstr "ÚÎÁÊÄÅÎÏ ÎÁ ÐÏÒÔÕ %s"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Author:"
-msgstr "á×ÔÏÔÅÓÔ"
-
-#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr ""
+msgid "Local files"
+msgstr "ìÏËÁÌØΦ ÆÁÊÌÉ"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_About..."
-msgstr "/ð¦ÄËÁÚËÁ/ðÒÏ..."
+#: ../../pkgs.pm:1
+#, c-format
+msgid "maybe"
+msgstr "ÍÏÖÌÉ×Ï"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_R ðÏצÄÏÍÉÔÉ ÐÒÏ ÐÏÍÉÌËÕ"
+msgid "Panama"
+msgstr "ðÁÎÁÍÁ"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Select a device !"
-msgstr "÷ÉÂÅÒ¦ÔØ ÇÒÁƦÞÎÕ ÐÌÁÔÕ"
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Monitor"
+msgstr "íÏΦÔÏÒ"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Harddrake help"
-msgstr ""
+msgid "65 thousand colors (16 bits)"
+msgstr "65 ÔÉÓÑÞ ËÏÌØÏÒ¦× (16 ¦Ô)"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "ïÐÉÓ"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "/_Help"
-msgstr "/ð¦ÄËÁÚËÁ"
+msgid "Size: %d KB\n"
+msgstr "òÏÚͦÒ: %d ëâ\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "/_Quit"
-msgstr "÷ÉȦÄ"
+msgid "Remove fonts on your system"
+msgstr "õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦!"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _modems"
-msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Graphical interface at startup"
+msgstr "óÔÁÒÔÕ×ÁÔÉ X Á×ÔÏÍÁÔÉÞÎÏ"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
-
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "/_Options"
-msgstr "/ðÁÒÁÍÅÔÒÉ"
+msgid "Please enter the directory to save:"
+msgstr "÷ÉÐÒÏÂÕÊÔÅ ÍÉÛËÕ, ÂÕÄØ-ÌÁÓËÁ"
#: ../../standalone/harddrake2:1
#, c-format
-msgid "the vendor name of the processor"
+msgid "format of floppies supported by the drive"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
#, c-format
-msgid "the vendor name of the device"
-msgstr ""
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "îÅÄÏÓÔÁÔÎØÏ Ð¦ÄÒÏÚÄ¦Ì¦× ÄÌÑ RAID Ò¦×ÎÑ %d\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "÷ÉÂÅÒ¦ÔØ ÄÏ ÑËÏÇÏ ÐÏÓ̦ÄÏ×ÎÏÇÏ ÐÏÒÔÕ ÐÒɤÄÎÁÎÏ ÍÉÛÕ?"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"ôÁ˦ ÐÒÉÎÔÅÒÉ ×ÖÅ ÓËÏÎƦ­ÕÒÏ×ÁΦ.\n"
+"÷É ÍÏÖÅÔÅ ÁÂÏ ÄÏÄÁÔÉ ÝÅ ÄÅÑ˦, ÁÂÏ ÚͦÎÉÔÉ Ô¦, ÝÏ ×ÖÅ ¦ÓÎÕÀÔØ."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr ""
+msgid "Connected"
+msgstr "ú'¤ÄÎÁÎÏ"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "ÆÏÒÍÁÔÕ×ÁÎÎÑ"
+msgid "USB printer \\#%s"
+msgstr "îÅÍÁ¤ ÐÒÉÎÔÅÒÁ"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "the number of the processor"
-msgstr ""
+msgid "Macedonian"
+msgstr "íÁËÅÄÏÎÓØËÁ"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Processor ID"
+msgid "Bridges and system controllers"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Save"
+msgstr "/æÁÊÌ/úÁ_ÐÉÓÁÔÉ"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Mali"
+msgstr "íÁ̦"
+
+#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
-msgid "network printer port"
-msgstr "ðÒÉÎÔÅÒ × ÍÅÒÅÖ¦ (ÓÏËÅÔ)"
+msgid "No details"
+msgstr "ðÏÄÒÏÂÉæ"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "the name of the CPU"
-msgstr ""
+msgid "very nice"
+msgstr "ÄÕÖÅ ÇÁÒÎÉÊ"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Name"
-msgstr "îÁÚ×Á: "
+msgid "Preview"
+msgstr "ÐÒÉÓÔÒ¦Ê"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "ä×ÏÈ ËÎÏÐÏÞÎÁ"
+msgid "Remote Control"
+msgstr "÷¦ÄÄÁÌÅÎÉÊ ÐÒÉÎÔÅÒ"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Number of buttons"
-msgstr "ä×ÏÈ ËÎÏÐÏÞÎÁ"
+msgid "Please select media for backup..."
+msgstr "÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÍÏ×Õ."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr ""
+msgid "XFree86 server: %s\n"
+msgstr "X ÓÅÒ×ÅÒ: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Model name"
-msgstr "îÁÚ×Á ÍÏÄÕÌÑ"
+msgid "Allow Thin Clients"
+msgstr "ë̦¤ÎÔ DHCP"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr ""
+msgid "Georgian (\"Russian\" layout)"
+msgstr "çÒÕÚÉÎÓØËÁ (ÒÏÓ¦ÊÓØËÁ ÒÏÚËÌÁÄËÁ)"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model"
-msgstr "íÏÄÕÌØ"
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "/_Options"
+msgstr "/ðÁÒÁÍÅÔÒÉ"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "hard disk model"
-msgstr "ðÁÍ'ÑÔØ ËÁÒÔËÉ (DMA)"
+msgid "Your printer model"
+msgstr "îÁÚ×Á צÄÄÁÌÅÎÏÇÏ ÐÒÉÎÔÅÒ"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "class of hardware device"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Media class"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Sub generation of the cpu"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/04-configuration.pl:1
#, fuzzy, c-format
-msgid "Level"
-msgstr "Ò¦×ÅÎØ"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr ""
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "ðÅÒÅÎ¦Ó ËÏÎƦÇÕÒÁæ§ ÐÒÉÎÔÅÒ¦× "
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Floppy format"
-msgstr "æÏÒÍÁÔÕ×ÁÔÉ"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
+msgid "Save"
+msgstr "óÔÁÔÕÓ"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Halt bug"
+msgid "The %s is unsupported"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
+msgid "Load the drivers for your usb devices."
+msgstr "úÁ×ÁÎÔÁÖÉÔÉ ÄÒÁÊ×ÅÒÉ ÄÌÑ ÐÒÉÓÔÒÏ§× usb."
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "F00f bug"
-msgstr ""
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Disk"
+msgstr "äÁÔÓØËÁ"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
+msgid "Enter a printer device URI"
+msgstr "÷×ÅĦÔØ URI ÐÒÉÓÔÒÏÀ ÐÒÉÎÔÅÒÁ"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Whether the FPU has an irq vector"
+msgid ""
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
+msgid "Israel"
+msgstr "¶ÚÒÁ¦ÌØ"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr ""
+msgid "French Guiana"
+msgstr "æÒÁÎÃÕÚØËÁ ½ÁÑÎÁ"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Fdiv bug"
-msgstr ""
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "add a rule"
+msgstr "äÏÄÁÔÉ ÍÏÄÕÌØ"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "A command line must be entered!"
+msgstr "ðÏÔÒ¦ÂÎÏ ××ÅÓÔÉ ËÏÒÅËÔÎÉÊ URI!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Flags"
+msgid "Select user manually"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr ""
+msgid "Transfer printer configuration"
+msgstr "ðÅÒÅÎ¦Ó ËÏÎƦÇÕÒÁæ§ ÐÒÉÎÔÅÒ¦× "
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Module"
-msgstr "íÏÄÕÌØ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "þÉ ÷É ÈÏÞÅÔŠצÄËÒÉ×ÁÔÉ Ú'¤ÄÎÁÎÎÑ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ?"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "New devfs device"
-msgstr "ûÌÀÚÏ×ÉÊ ÐÒÉÓÔÒ¦Ê"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "old static device name used in dev package"
-msgstr ""
+msgid "%s (Port %s)"
+msgstr "ðÏÒÔ"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Old device file"
-msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
+msgid "Use network connection to backup"
+msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
#, c-format
-msgid "This field describes the device"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
msgstr ""
+"ôÅÐÅÒ ÞÁÓ ×ÉÂÒÁÔÉ, Ñ˦ ÐÒÏÇÒÁÍÉ ÷É ÈÏÞÅÔÅ ÍÁÔÉ × Ó×ϧÊ\n"
+"ÓÉÓÔÅͦ. íÁÎÄÒÅÊË ì¦ÎÁËÓ ÍÁ¤ ÔÉÓÑÞ¦ ÐÒÏÇÒÁÍÎÉÈ ÐÁËÅÔ¦×, ¦ ÷ÁÍ ÎÅÍÁ¤\n"
+"ÎÅÏÂȦÄÎÏÓÔ¦ ÚÎÁÔÉ §È ×Ó¦. \n"
+"\n"
+"ñËÝÏ ÷É ×ÓÔÁÎÏ×ÌÀ¤ÔÅ ÓÉÓÔÅÍÕ ¦Ú ÓÔÁÎÄÁÒÔÎÏÇÏ ËÏÍÐÁËÔ-ÄÉÓËÕ, ÷ÁÍ\n"
+"ÓÐÏÞÁÔËÕ ÂÕÄÅ ÚÁÄÁÎÅ ÚÁÐÉÔÁÎÎÑ, Ñ˦ ÄÉÓËÉ ÷É ÍÁ¤ÔÅ. ðÅÒÅצÒÔÅ Ó×ϧ\n"
+"ËÏÍÐÁËÔ-ÄÉÓËÉ, צÄͦÔØÔŠצÄÐÏצÄΦ ÐÕÎËÔÉ ÎÁ ÅËÒÁΦ ¦ ÎÁÔÉÓΦÔØ\n"
+"çÁÒÁÚÄ.\n"
+"\n"
+"ðÁËÅÔÉ Ú¦ÂÒÁΦ Õ ÇÒÕÐÉ ÐÁËÅÔ¦×, צÄÐÏצÄÎÏ ÄÏ ËÏÎËÒÅÔÎÏÇÏ ×ÖÉÔËÕ ÄÌÑ\n"
+"ÍÁÛÉÎÉ.\n"
+"\n"
+"çÒÕÐÉ ÐÁËÅÔ¦× ÒÏÚĦÌÅΦ ÎÁ ÞÏÔÉÒÉ ×ÅÌÉ˦ ÒÏÚĦÌÉ:\n"
+"\n"
+"* òÏÂÏÞÁ ÓÔÁÎæÑ: ÑËÝÏ ÷ÁÛÁ ÍÁÛÉÎÁ ÂÕÄÅ ×ÖÉ×ÁÔÉÓÑ ÑË ÒÏÂÏÞÁ ÓÔÁÎæÑ,\n"
+"×ÉÂÅÒ¦ÔØ ÏÄÎÕ ÞÉ Ë¦ÌØËÁ צÄÐÏצÄÎÉÈ ÇÒÕÐ.\n"
+"\n"
+"* çÒÁƦÞΦ ÓÅÒÅÄÏ×ÉÝÁ: ÷ÉÂÅÒ¦ÔØ ÇÒÁƦÞÎÅ ÓÅÒÅÄÏ×ÉÝÅ ÓϦ ÄÏ\n"
+"×ÐÏÄÏÂÉ. ÷ÉÂÅÒ¦ÔØ ÈÏÞÁ  ÏÄÎÅ, ÑËÝÏ ÷É ÈÏÞÅÔÅ ×ÖÉ×ÁÔÉ ÍÁÛÉÎÕ ÑË ÒÏÂÏÞÕ\n"
+"ÓÔÁÎæÀ.\n"
+"\n"
+"* òÏÚÒÏÂËÁ: ×ÉÂÅÒ¦ÔØ ×¦ÄÐÏצÄΦ ÇÒÕÐÉ, ÑËÝÏ ÃÑ ÍÁÛÉÎÁ ÂÕÄÅ ×ÖÉ×ÁÔÉÓÑ\n"
+"ÄÌÑ ÐÒÏÇÒÁÍÕ×ÁÎÎÑ.\n"
+"\n"
+"* óÅÒ×ÅÒ: ÎÁÒÅÛÔ¦, ÑËÝÏ ÍÁÛÉÎÁ ÂÕÄÕ¤ÔØÓÑ ÄÌÑ ×ÉËÏÒÉÓÔÁÎÎÑ × ÑËÏÓÔ¦\n"
+"ÓÅÒ×ÅÒÁ, ÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÎÁʦÌØÛ ÒÏÚÐÏ×ÓÀÄÖÅΦ ÓÅÒצÓÉ, Ñ˦ ÷É\n"
+"ÈÏÞÅÔÅ ÂÁÞÉÔÉ ÎÁ Ó×Ï§Ê ÍÁÛÉΦ.\n"
+"\n"
+"ðÅÒÅÓÕ×ÁÎÎÑ ËÕÒÓÏÒÁ ¦ ËÏÒÏÔËÁ ÚÕÐÉÎËÁ ÎÁÄ ÐÅ×ÎÉÍ ÐÕÎËÔÏÍ ÂÕÄÅ\n"
+"×ÉÓצÞÕ×ÁÔÉ Ð¦ÄËÁÚËÕ ÐÏ ÄÁÎ¦Ê ÇÒÕЦ.\n"
+"\n"
+"ñËÝÏ ÷É ÎÁÔÉÓÎÅÔÅ ÎÁ ËÎÏÐËÕ äÏÄÁÔËÏ×Ï, ÷É ÂÕÄÅÔÅ ÍÁÔÉ ÍÏÖÌÉצÓÔØ\n"
+"×ÉÂÒÁÔÉ ÏËÒÅͦ ÐÁËÅÔÉ ÏÄÉÎ ÐÏ ÏÄÎÏÍÕ. ãÅ ÚÒÕÞÎÏ, ÑËÝÏ ÷É ÄÏÂÒÅ ÚÎÁ¤ÔÅ,\n"
+"Ñ˦ ÐÁËÅÔÉ ×ÓÔÁÎÏ×ÌÀÀÔØÓÑ, ÁÂÏ ÑËÝÏ ÷É ÈÏÞÅÔÅ ÍÁÔÉ ÐÏ×ÎÉÊ ËÏÎÔÒÏÌØ ÎÁÄ\n"
+"ÔÉÍ, ÝÏ ×ÓÔÁÎÏ×ÌÀ¤ÔØÓÑ × ÓÉÓÔÅͦ. \n"
+"\n"
+"ñËÝÏ ÷É ÐÏÞÁÌÉ ÕÓÔÁÎÏ×ËÕ × ÒÅÖÉͦ \"ðÏÎÏ×ÌÅÎÎÑ\", ÷É ÍÏÖÅÔŠצÄͦÎÉÔÉ\n"
+"×ÉÂ¦Ò ×Ó¦È ÇÒÕÐ ÝÏÂ Õ ÓÉÓÔÅͦ ÎÅ ×ÓÔÁÎÏ×ÌÀ×ÁÌÉÓØ Î¦Ñ˦ ÎÏצ ÐÁËÅÔÉ ¦\n"
+"Ô¦ÌØËÉ ÓÉÓÔÅÍÁ ÐÏÎÏ×ÉÌÁÓØ. "
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr ""
+msgid "Accept user"
+msgstr "ðÒÉÊÎÑÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr ""
+msgid "Server"
+msgstr "óÅÒ×ÅÒ"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Bad choice, try again\n"
+msgstr "îÅ×ÄÁÌÉÊ ×ɦÒ, ÓÐÒÏÂÕÊÔÅ ÝÅ ÒÁÚ\n"
+
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "÷ÓÔÁÎÏ×ÌÅÎÎÑ Ò¦×ÎÑ ÂÅÚÐÅËÉ"
+msgid "Heard and McDonald Islands"
+msgstr "èÅÒÄÓØ˦ ¦ íÁËäÏÎÁÌØÄÓØ˦ ÏÓÔÒÏ×É"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
+msgid "No alternative driver"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr ""
+msgid "Toggle to expert mode"
+msgstr "ú×ÉÞÁÊÎÉÊ > åËÓÐÅÒÔ"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr ""
+msgid "(on this machine)"
+msgstr "(ÎÁ Ã¦Ê ÍÁÛÉΦ)"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Coma bug"
-msgstr ""
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "IP ÁÄÒÅÓÁ ÍÁ¤ ÂÕÔÉ Õ ÆÏÒÍÁÔ¦ 1.2.3.4"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
+msgid ""
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Drive capacity"
-msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Looking at packages already installed..."
+msgstr "÷ÉÂ¦Ò ÃØÏÇÏ ÐÁËÅÔÕ ÎÅÍÏÖÌÉ×Ï ×¦ÄͦÎÉÔÉ. êÏÇÏ ×ÖÅ ×ÓÔÁÎÏ×ÌÅÎÏ."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Size of the (second level) cpu cache"
+msgid "Use Differential Backups"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Cache size"
-msgstr "ÒÏÚÍ¦Ò Ä¦ÌÑÎËÉ"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Driver"
+msgstr "äÒÁÊ×ÅÒ"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
+"Linuxconf Õ ÄÅÑËÉÈ ×ÉÐÁÄËÁÈ ÂÕÄÅ ×ÉËÏÎÕ×ÁÔÉ ÐÅ×Φ ÐÒÏÃÅÄÕÒÉ Ð¦Ä ÞÁÓ\n"
+"ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ ÝÏ ÚÁÂÅÚÐÅÞÉÔÉ Ð¦ÄÔÒÉÍÁÎÎÑ Ã¦Ì¦ÓÎÏÓÔ¦\n"
+"ËÏÎƦ­ÕÒÁæ§ ÓÉÓÔÅÍÉ."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Location on the bus"
-msgstr ""
+msgid "Printer on remote lpd server"
+msgstr "ðÒÉÎÔÅÒ ÎÁ צÄÄÁÌÅÎÏÍÕ ÓÅÒ×ÅÒ¦ lpd"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Bus identification"
-msgstr "á×ÔÅÎÔÉËÁæÑ"
-
-#: ../../standalone/harddrake2:1
-#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
msgstr ""
+"Yaboot - ÃÅ ÚÁ×ÁÎÔÁÖÕ×ÁÞ ÓÉÓÔÅÍÉ ÄÌÑ íÁ˦ÎÔÏÛ¦× îÏ×ÏÇÏ ÔÉÐÕ. ÷¦Î ÍÏÖÅ\n"
+"ÚÁ×ÁÎÔÁÖÕ×ÁÔÉ ÂÕÄØ-ÑËÕ ¦Ú ÓÉÓÔÅÍ: GNU/Linux, MacOS, MacOSX, ÑËÝÏ ×¦Î\n"
+"×ÓÔÁÎÏ×ÌÅÎÉÊ × ÓÉÓÔÅͦ. ÷ ¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦× Ã¦ ÓÉÓÔÅÍÉ ×¦ÒÎÏ\n"
+"×ÉÚÎÁÞÁÀÔØÓÑ ¦ ×ÓÔÁÎÏ×ÌÀÀÔØÓÑ. ñËÝÏ ÃÅ ÎÅ ÔÁË - ÍÏÖÅÔÅ ÄÏÄÁÔÉ ÐÕÎËÔ\n"
+"×ÒÕÞÎÕ ÎÁ ÃØÏÍÕ ÅËÒÁΦ. âÕÄØÔÅ Õ×ÁÖΦ ÐÒÉ ×ÉÂÏÒ¦ ËÏÒÅËÔÎÉÊ\n"
+"ÐÁÒÁÍÅÔÒ¦×. \n"
+"\n"
+"ïÓÎÏ×Φ ÐÁÒÁÍÅÔÒÉ Yaboot:\n"
+"\n"
+" * ðÏצÄÏÍÌÅÎÎÑ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ: ÐÒÏÓÔÅ ÔÅËÓÔÏ×Å ÐÏצÄÏÍÌÅÎÎÑ, ÑËÅ\n"
+"ÄÅÍÏÎÓÔÒÕ¤ÔØÓÑ ÐÅÒÅÄ ÚÁ×ÁÎÔÁÖÅÎÎÑÍ.\n"
+"\n"
+" * ðÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÅÎÎÑ: ×ËÁÚÕ¤ ÎÁ ÔÅ, ÄÅ ÓÁÍÅ ÚÁÐÉÓÕ¤ÔØÓÑ\n"
+"¦ÎÆÏÒÍÁÃ¦Ñ ÐÏÔÒ¦ÂÎÁ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ GNU/Linux. úÁÇÁÌÏÍ, ×ÁÍ ÐÏÔÒ¦ÂÎÏ\n"
+"ÎÁÚÎÁÞÉÔÉ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÉÊ Ð¦ÄÒÏÚÄ¦Ì ÄÌÑ ÔÏÇÏ, ÝÏ ÚÂÅÒ¦ÇÁÔÉ ÃÀ\n"
+"¦ÎÆÏÒÍÁæÀ. \n"
+"\n"
+" * úÁÔÒÉÍËÁ Open Firmware: ÎÁ צÄͦÎÕ ×¦Ä Lilo, ÔÕÔ ¤ Äצ Ò¦ÚÎÉÈ\n"
+"ÐÅÒ¦ÏÄÉ ÚÁÔÒÉÍËÉ × Yaboot. ðÅÒÛÉÊ ÐÅÒ¦ÏÄ ÚÁÔÒÉÍËÉ ×ÉͦÒÀ¤ÔØÓÑ ×\n"
+"ÓÅËÕÎÄÁÈ. ð¦Ä ÞÁÓ ÃØÏÇÏ ÐÅÒ¦ÏÄÕ ÚÁÔÒÉÍËÉ ×É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÚצÄËÉ\n"
+"ÚÁ×ÁÎÔÁÖÕ×ÁÔÉÓÑ: Ú ËÏÍÐÁËÔ-ÄÉÓËÕ, OF, MacOS ÞÉ ì¦ÎÁËÓ.\n"
+"\n"
+" * ðÅÒ¦ÏÄ ÚÁÔÒÉÍËÉ ÐÅÒÅÄ ÚÁ×ÁÎÔÁÖÅÎÎÑÍ ÑÄÒÁ: ÃÅÊ ÐÅÒ¦ÏÄ ÐÏĦÂÎÉÊ ÄÏ\n"
+"ÚÁÔÒÉÍËÉ Lilo. ð¦ÓÌÑ ×ÉÂÏÒÕ ì¦ÎÁËÓÁ, ÚÁÔÒÉÍËÁ ÏÂÞÉÓÌÀ¤ÔØÓÑ × ÄÅÓÑÔÉÈ\n"
+"ÓÅËÕÎÄÉ ÐÅÒÛ, Î¦Ö ÐÏÞÎÅ ÚÁ×ÁÎÔÁÖÕ×ÁÔÉÓÑ ÓÔÁÎÄÁÒÔÎÅ ÑÄÒÏ.\n"
+"\n"
+" * äÏÚ×ÏÌÉÔÉ ÚÁ×ÁÎÔÁÖÅÎÎÑ Ú ËÏÍÐÁËÔ-ÄÉÓËÕ?: ÑËÝÏ ÃÅÊ ÐÁÒÁÍÅÔÒ\n"
+"×ÉÂÒÁÎÏ, ×É ÍÏÖÅÔÅ ÎÁÔÉÓÎÕÔÉ 'C' ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ Ð¦Ä ÞÁÓ ÐÅÒÛÏÇÏ\n"
+"ÐÅÒ¦ÏÄÕ ÚÁÔÒÉÍËÉ.\n"
+"\n"
+" * äÏÚ×ÏÌÉÔÉ ÚÁ×ÁÎÔÁÖÅÎÎÑ OF: ÑËÝÏ ×É ×ÉÂÅÒÅÔÅ ÃÅÊ ÐÁÒÁÍÅÔÒ, ×É\n"
+"ÚÍÏÖÅÔÅ ÎÁÔÉÓÎÕÔÉ 'N' Ð¦Ä ÞÁÓ ÐÅÒÛÏÇÏ ÐÅÒ¦ÏÄÕ ÚÁÔÒÉÍËÉ ÄÌÑ\n"
+"ÚÁ×ÁÎÔÁÖÅÎÎÑ Ú Open Firmware.\n"
+"\n"
+" * óÔÁÎÄÁÒÔÎÁ ïó: ÃÉÍ ×É ÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÓÔÁÎÄÁÒÔÎÕ ÓÉÓÔÅÍÕ, ÑËÁ\n"
+"ÚÁ×ÁÎÔÁÖÉÔØÓÑ Ð¦ÓÌÑ ÔÏÇÏ, ÑË ÚÁ˦ÎÞÉÔØÓÑ ÚÁÔÒÉÍËÁ Open Firmware."
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Bogomips"
-msgstr ""
+msgid "No mouse"
+msgstr "âÅÚ ÍÉÛËÉ"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr ""
+msgid "Germany"
+msgstr "î¦ÍÅÞÞÉÎÁ"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "Channel"
-msgstr "÷¦ÄͦÎÉÔÉ"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
+msgid "Austria"
+msgstr "ÐÏÓ̦ÄÏ×ÎÉÊ"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bus"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Alternative drivers"
-msgstr "äÏÄÁÔËÏ×Á ÔÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ (A4)"
+msgid "Collapse Tree"
+msgstr "óÔÉÓÎÕÔÉ ÄÅÒÅ×Ï"
-#: ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "÷É ÈÏÞÅÔÅ ÝÏ BackSpace ÄÁ×Á× Delete ÎÁ ËÏÎÓÏ̦?"
+msgid "Auto Install Configurator"
+msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ Á×ÔÏÍÁÔÉÞÎϧ ÕÓÔÁÎÏ×ËÉ"
-#: ../../standalone/keyboarddrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "ñËÁ Õ ÷ÁÓ ÒÏÚËÌÁÄËÁ ËÌÁצÁÔÕÒÉ?"
+msgid "Configure networking"
+msgstr "îÁÓÔÒϧÔÉ ÍÅÒÅÖÕ"
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "îÅ ÍÏÖÕ ÓÔÁÒÔÕ×ÁÔÉ \"ÖÉ×Å ÐÏÎÏ×ÌÅÎÎÑ\"!!!\n"
+msgid "Where do you want to install the bootloader?"
+msgstr "äÅ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÓÔÁÒÔÏ×ÉÊ ÂÌÏË?"
-#: ../../standalone/livedrake:1
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-"âÕÄØ-ÌÁÓËÁ, ×ÓÔÁ×ÔÅ ËÏÍÐÁËÔ-ÄÉÓË, ÐÏÚÎÁÞÅÎÉÊ \"%s\" Õ ÐÒÉÓÔÒ¦Ê ¦\n"
-"ÎÁÔÉÓΦÔØ çÁÒÁÚÄ Ð¦ÓÌÑ ÃØÏÇÏ.\n"
+"âÕÄØ ÌÁÓËÁ, ×ÉÂÅÒ¦ÔØ ÍÏ×Õ ÄÌÑ ÕÓÔÁÎÏ×ËÕ ÓÉÓÔÅÍÉ ÔÁ ËÏÒÉÓÔÕ×ÁÎÎÑ Ð¦ÓÌÑ\n"
+"ÕÓÔÁÎÏ×ËÉ. \n"
"\n"
-"ñËÝÏ ÷É ÎÅ ÍÁ¤ÔÅ ÔÁËÏÇÏ ÄÉÓËÕ, ÎÁÔÉÓΦÔØ ÷¦ÄͦÎÉÔÉ, ÝÏ ÎÅ\n"
-"×ÓÔÁÎÏ×ÌÀ×ÁÔÉ Ú ÃØÏÇÏ ÄÉÓËÕ."
+"ðÒÉÓÕÔÎÑ ÔÁËÏÖ ËÎÏÐËÁ \"äÏÄÁÔËÏ×Ï\", ÑËÁ ÄÏÚ×ÏÌѤ ÷ÁÍ ×ÉÂÒÁÔÉ ¦ÎÛ¦ ÍÏ×É,\n"
+"Ñ˦ ÍÏÖÕÔØ ÂÕÔÉ ÔÁËÏÖ ÕÓÔÁÎÏ×ÌÅÎÉÍÉ × ÓÉÓÔÅͦ. ÷É ÚÍÏÖÅÔÅ\n"
+"ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÃÉÍÉ ÍÏ×ÁÍÉ Ð¦ÓÌÑ ÕÓÔÁÎÏ×ËÉ. ñËÝÏ, ÎÁÐÒÉËÌÁÄ, ÎÁ ÷ÁÛ¦Ê\n"
+"ÍÁÛÉΦ (Õ ÑËϧ ÁÎÇ̦ÊÓØËÁ ×ÓÔÁÎÏ×ÌÅÎÁ ÏÓÎÏ×ÎÏÀ ÍÏ×ÏÀ) ÂÕÄÕÔØ ÐÒÁÃÀ×ÁÔÉ\n"
+"¦ÓÐÁÎæ, ×ÉÂÅÒ¦ÔØ × ÄÏÄÁÔËÏ×ÉÈ ÍÏ×ÁÈ ¶ÓÐÁÎÓØËÁ|¶ÓÐÁΦÑ.\n"
+"\n"
+"ð¦ÓÌÑ ×ÉÂÏÒÕ ÍÏ×É ¦ ЦÄÔ×ÅÒÄÖÅÎÎÑ, ÷É Á×ÔÏÍÁÔÉÞÎÏ ÐÅÒÅÈÏÄÉÔÅ ÄÏ\n"
+"ÎÁÓÔÕÐÎÏÇÏ ËÒÏËÕ."
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "úͦΦÔØ ËÏÍÐÁËÔ-ÄÉÓË"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr ""
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
+msgid "DHCP client"
+msgstr "Ë̦¤ÎÔ DHCP"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Save as.."
-msgstr "úÂÅÒÅÇÔÉ ÑË.."
+msgid "Restoring from file %s failed: %s"
+msgstr "÷¦ÄÎÏ×ÌÅÎÎÑ Ú ÆÁÊÌÕ %s ÎÅ ÓÐÒÁÃÀ×ÁÌÏ: %s"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Please enter your email address below "
-msgstr "âÕÄØ-ÌÁÓËÁ, ÓÐÒÏÂÕÊÔÅ ÝÅ ÒÁÚ"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (serial, ÔÉÐ C7)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "alert configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ¦ÎÔÅÒÎÅÔÕ"
+msgid "New devfs device"
+msgstr "ûÌÀÚÏ×ÉÊ ÐÒÉÓÔÒ¦Ê"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
+msgid "ERROR: Cannot spawn %s."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Boot Style Configuration"
+msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÓÔÉÌÀ ÕÓÔÁÎÏ×ËÉ"
+
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "load setting"
-msgstr "ÆÏÒÍÁÔÕ×ÁÎÎÑ"
+msgid "Automatic time synchronization"
+msgstr "á×ÔÏÍÁÔÉÞÎÁ ÓÉÎÈÒÏΦÚÁÃ¦Ñ ÞÁÓÕ (¦Ú ÚÁÓÔÏÓÕ×ÁÎÎÑÍ NTP)"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
+msgid "Backup files not found at %s."
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "service setting"
-msgstr "æËÁ×Ï"
+#: ../../share/advertising/01-thanks.pl:1
+#, c-format
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Xinetd Service"
-msgstr "ðÒÉÎÔÅÒ ÓÅÒ×ÅÒ"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (phonetic)"
+msgstr "÷¦ÒÍÅÎÓØËÁ (ÆÏÎÅÔÉÞÎÁ)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid "Webmin Service"
-msgstr "óÅÒ×ÅÒ"
+msgid "Card model:"
+msgstr "ðÁÍ'ÑÔØ ËÁÒÔËÉ (DMA)"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "SSH Server"
-msgstr "óÅÒ×ÅÒ NIS"
+msgid "Thin Client"
+msgstr "ë̦¤ÎÔ DHCP"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Samba Server"
+msgid "Start Server"
msgstr "óÅÒ×ÅÒ NIS"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Postfix Mail Server"
-msgstr "ðÏÛÔÏ×ÉÊ ÓÅÒ×ÅÒ postfix, ÓÅÒ×ÅÒ ÎÏ×ÉÎ inn"
+#: ../../lang.pm:1
+#, c-format
+msgid "Turkmenistan"
+msgstr "ôÕÒËÍÅΦÓÔÁÎ"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Ftp Server"
-msgstr "óÅÒ×ÅÒ NIS"
+msgid "All remote machines"
+msgstr "(ÎÁ Ã¦Ê ÍÁÛÉΦ)"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "îÁÚ×Á ÄÏÍÅÎÕ"
+msgid "Install themes"
+msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr ""
-
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-"ìÁÓËÁ×Ï ÐÒÏÓÉÍÏ ÄÏ ËÏÎƦ­ÕÒÁæÊÎϧ ÐÒÏÇÒÁÍÉ ÄÌÑ ÐÒÏËÓ¦.\n"
-"\n"
-"ôÕÔ ÷É ÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÐÒÏËÓ¦ ÄÌÑ ÐÒÏÔÏËÏÌ¦× ftp ÔÁ http Ú ÐÁÒÏÌÅÍ\n"
-"ÞÉ ÂÅÚ. \n"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Mail alert configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ¦ÎÔÅÒÎÅÔÕ"
-
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert"
+msgid "Espanol"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "ÂÕÄØ ÌÁÓËÁ ÚÁÖĦÔØ, ÐÒÏÈÏÄÖÅÎÎÑ ÆÁÊÌÕ: %s"
+msgid "Preparing installation"
+msgstr "ð¦ÄÇÏÔÏ×ËÁ ÕÓÔÁÎÏ×ËÉ"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Content of the file"
-msgstr "úͦÓÔ ÆÁÊÌÕ"
+msgid "Edit selected host/network"
+msgstr ""
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "Calendar"
-msgstr "ëÁÌÅÎÄÁÒ"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Add User -->"
+msgstr "äÏÄÁÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose file"
-msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
+msgid "Nauru"
+msgstr "îÁÕÒÕ"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "but not matching"
-msgstr "ÁÌŠΊצÄÐÏצÄÁ¤"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "True Type fonts installation"
+msgstr "ð¦ÄÇÏÔÏ×ËÁ ÕÓÔÁÎÏ×ËÉ"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "matching"
-msgstr "צÄÐÏצÄÁ¤"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr ""
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Settings"
-msgstr "ðÁÒÁÍÅÔÒÉ"
+msgid "LAN configuration"
+msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "A tool to monitor your logs"
-msgstr "úÁӦ ÄÏÇÌÑÄÁÎÎÑ ÷ÁÛÉÈ ÖÕÒÎÁÌØÎÉÈ ÆÁÊ̦×"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "hard disk model"
+msgstr "ðÁÍ'ÑÔØ ËÁÒÔËÉ (DMA)"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "search"
-msgstr "ÐÏÛÕË"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "äÌÑ ÔÏÞËÉ ÍÏÎÔÕ×ÁÎÎÑ %s ÎÅ ÍÏÖÎÁ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÌÏǦÞÎÉÍ ÔÏÍÏÍ LVM"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Mandrake Tools Explanation"
+msgid "Get Windows Fonts"
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Syslog"
-msgstr "syslog"
-
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Messages"
-msgstr "ÐÏצÄÏÍÌÅÎÎÑ"
-
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "User"
-msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
-
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/ð¦ÄËÁÚËÁ/ðÒÏ..."
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/ðÁÒÁÍÅÔÒÉ/ôÅÓÔ"
+msgid "Iranian"
+msgstr "¶ÒÁÎÓØËÁ"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "/File/-"
-msgstr "/æÁÊÌ/-"
+msgid "Croatia"
+msgstr "èÏÒ×ÁÔ¦Ñ"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/æÁÊÌ/úͦÎÉÔÉ _ÎÁÚ×Õ"
+msgid "Gateway:"
+msgstr "ûÌÀÚ:"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Add server"
+msgstr "äÏÄÁÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "/æÁÊÌ/úÁ_ÐÉÓÁÔÉ"
+msgid "Remote printer name"
+msgstr "îÁÚ×Á צÄÄÁÌÅÎÏÇÏ ÐÒÉÎÔÅÒ"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/File/_Open"
-msgstr "/æÁÊÌ/_÷¦ÄËÒÉÔÉ"
+msgid "Device: "
+msgstr "ðÒÉÓÔÒ¦Ê: "
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Printerdrake"
+msgstr "äÒÕËÁÒËÁ"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/File/_New"
-msgstr "/æÁÊÌ/îÏ×ÉÊ"
+msgid "License agreement"
+msgstr "ì¦ÃÅÎÚ¦ÊÎÁ ÕÍÏ×Á"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Show only for the selected day"
-msgstr "ðÏËÁÚÕ×ÁÔÉ ÌÉÛÅ ÄÌÑ ÃØÏÇÏ ÄÎÑ"
+msgid "System Options"
+msgstr "ïÐæ§ ÍÏÄÕÌÑ:"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Emulate third button?"
-msgstr "¶Í¦ÔÕ×Á×ÁÔÉ ÔÒÉ ËÎÏÐËÉ?"
+msgid "Please enter the directory where backups are stored"
+msgstr ""
-#: ../../standalone/mousedrake:1
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Please choose the desired security level"
+msgstr "÷ÉÂÅÒ¦ÔØ Ò¦×ÅÎØ ÚÁÈÉÓÔÕ"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "ñËÉÊ ÔÉÐ ÍÉÛ¦ ×É ÍÁ¤ÔÅ?"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Connect %s"
-msgstr "ú'¤ÄÎÁÔÉÓØ"
+msgid ", USB printer"
+msgstr "îÅÍÁ¤ ÐÒÉÎÔÅÒÁ"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Disconnect %s"
-msgstr "÷¦Ä'¤ÄÎÁÔÉÓØ"
-
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
+msgid "Choose the applications that will support the fonts:"
+msgstr "÷ÉÂÅÒ¦ÔØ Ð¦ÄÒÏÚĦÌÉ, Ñ˦ ÷É ÈÏÞÅÔŠצÄÆÏÒÍÁÔÕ×ÁÔÉ"
-#: ../../standalone/net_monitor:1
+#: ../../steps.pm:1
#, c-format
-msgid "received"
-msgstr ""
+msgid "Configure X"
+msgstr "îÁÓÔÒϧÔÉ X"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "transmitted"
-msgstr ""
+msgid "Turkish (traditional \"F\" model)"
+msgstr "ôÕÒÅÃØËÁ (ÔÒÁÄÉæÊÎÁ \"F\" ÍÏÄÅÌØ)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "received: "
-msgstr ""
+msgid "Congratulations!"
+msgstr "÷¦ÔÁÎÎÑ!"
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "sent: "
-msgstr ""
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Use owner id for execution"
+msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Local measure"
-msgstr "ìÏËÁÌØΦ ÆÁÊÌÉ"
+msgid "Down"
+msgstr "úÁ˦ÎÞÅÎÏ"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "average"
+msgid "Raw printer (No driver)"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, fuzzy, c-format
-msgid "Color configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ¦ÎÔÅÒÎÅÔÕ"
+msgid "Install rpm"
+msgstr "õÓÔÁÎÏ×ËÁ"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection complete."
-msgstr "û×ÉÄ˦ÓÔØ Ú×'ÑÚËÕ"
-
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr ""
+msgid "Time remaining "
+msgstr "úÁÌÉÛÏË ÞÁÓÕ "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr ""
+msgid "UK keyboard"
+msgstr "âÒÉÔÁÎÓØËÁ ËÌÁצÁÔÕÒÁ"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connecting to the Internet "
-msgstr "ú'¤ÄÎÁÔÉÓÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Unmount"
+msgstr "òÏÚÍÏÎÔÕ×ÁÔÉ"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Disconnecting from the Internet "
-msgstr "ú'¤ÄÎÁÔÉÓÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
+msgid "Uninstall Fonts"
+msgstr "äŦÎÓÔÁÌÀÀ RPM'É"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, fuzzy, c-format
-msgid "Wait please, testing your connection..."
-msgstr "÷ÉÐÒÏÂÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑ..."
+msgid "Microsoft Explorer"
+msgstr "Microsoft IntelliMouse"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Logs"
-msgstr ""
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection Time: "
-msgstr "ôÉÐ Ú×'ÑÚËÕ:"
+msgid "German (no dead keys)"
+msgstr "î¦ÍÅÃØËÁ (ÂÅÚ ÍÅÒÔ×ÉÈ ËÌÁצÛ)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Receiving Speed:"
-msgstr ""
+msgid "Transferring %s..."
+msgstr "ðÅÒÅÎÏÛÕ %s ..."
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Sending Speed:"
-msgstr "úÁÐÉÓÁÔÉ × ÆÁÊÌ"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "32 thousand colors (15 bits)"
+msgstr "32 ÔÉÓÑÞ¦ ËÏÌØÏÒ¦× (15 ¦Ô)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Statistics"
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Profile "
-msgstr "ðÒÏƦÌØ: "
+msgid "Reboot"
+msgstr "Root"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
+#: ../../lang.pm:1
+#, c-format
+msgid "Gambia"
+msgstr "½ÁͦÑ"
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
+msgid "Mandrake Control Center"
+msgstr "ãÅÎÔÒ ËÅÒÕ×ÁÎÎÑ"
-#: ../../standalone/scannerdrake:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Name/IP address of host:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "÷ÉÂÅÒ¦ÔØ ÇÒÁƦÞÎÕ ÐÌÁÔÕ"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "÷ÉÐÒÏÂÕÊÔÅ ÍÉÛËÕ, ÂÕÄØ-ÌÁÓËÁ"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid "\t-Tape \n"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "This machine"
-msgstr "(ÎÁ Ã¦Ê ÍÁÛÉΦ)"
+#: ../../standalone/drakhelp:1
+#, c-format
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
+msgid "Remember this password"
+msgstr "ÝÅ ÒÁÚ ÐÁÒÏÌØ"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "ÚÎÁÊÄÅÎÏ %s"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing is now enabled."
+msgstr "óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÍÉËÎÅÎÅ"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Add host"
-msgstr "äÏÄÁÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Network by SSH.\n"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ×¦ÌØÎÉÊ ÐÒÏÓÔ¦Ò"
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, c-format
+msgid "Use the free space on the Windows partition"
+msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ×¦ÌØÎÉÊ ÐÒÏÓÔ¦Ò ÎÁ ЦÄÒÏÚĦ̦ Windows"
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "All remote machines"
-msgstr "(ÎÁ Ã¦Ê ÍÁÛÉΦ)"
+msgid "%s found on %s, configure it automatically?"
+msgstr "þÉ ÔÒÅÂÁ ÷ÁÍ ÎÁÓÔÒϧÔÉ ÄÒÕË?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Use the scanners on hosts: "
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86 ÄÒÁÊ×ÅÒ: %s\n"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use scanners on remote computers"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "äÒÕË"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the packages you want to install"
+msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
+msgid "Papua New Guinea"
+msgstr "ðÁÐÕÁ îÏ×Á çצÎÅÑ"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
+msgid "Serbian (cyrillic)"
+msgstr "óÅÒÂÓØËÁ (ËÉÒÉÌÉÃÑ)"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Make kernel message quiet by default"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
+"÷ÓÔÁÎÏ×ÉÔÉ ÐÒÉÎÔÅÒ \"%s\"\n"
+"ÑË ÓÔÁÎÄÁÒÔÎÉÊ?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
+msgid "The DHCP end range"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "äÒÕË"
-
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr ""
+msgid "Creating bootdisk..."
+msgstr "óÔ×ÏÒÀÀ ÄÉÓËÅÔÕ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
+msgid "Wait please, testing your connection..."
+msgstr "÷ÉÐÒÏÂÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑ..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr "õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦!"
+msgid "Bringing down the network"
+msgstr "÷ÉÍÉËÁÀ ÍÅÒÅÖÕ"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr "õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦!"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Login ID"
+msgstr "ID ËÏÒÉÓÔÕ×ÁÞÁ"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
+"NFS - ÃÅ ÄÕÖÅ ÐÏÐÕÌÑÒÎÉÊ ÐÒÏÔÏËÏÌ ÄÌÑ ÓЦÌØÎÏÇÏ ×ÉËÏÒÉÓÔÁÎÎÑ ÆÁÊÌ¦× ÎÁ\n"
+"ËÏÍÐ'ÀÔÅÒÁÈ, Ú'¤ÄÎÁÎÉÈ ÍÅÒÅÖÅÀ TCP/IP. ãÅÊ ÓÅÒ×¦Ó ÚÁÂÅÚÐÅÞÕ¤\n"
+"ÍÏÖÌÉצÓÔØ ËÏÒÉÓÔÕ×ÁÎÎÑ ÚÁÍÉËÁÎÎÑÍ ÆÁÊ̦×."
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "choose device"
-msgstr "ðÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÅÎÎÑ"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr ""
+msgid "DHCP Client"
+msgstr "ë̦¤ÎÔ DHCP"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "dismiss"
+msgstr "ÐÒÉÂÒÁÔÉ"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
+msgid "Printing/Scanning on \"%s\""
+msgstr "÷ÉÍÉËÁÀ ÍÅÒÅÖÕ"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
+msgid "omit raid modules"
+msgstr "ÐÒÏÐÕÓËÁÔÉ ÍÏÄÕ̦ raid"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
+"lpd - ÃÅ ÄÅÍÏÎ ÄÒÕËÕ, ÑËÉÊ ÚÁÂÅÚÐÅÞÕ¤ ÒÏÂÏÔÕ lpr. æÁËÔÉÞÎÏ ×¦Î ¤\n"
+"ÓÅÒ×ÅÒÏÍ, ÑËÉÊ ÎÁÄÓÉÌÁ¤ ÒÏÂÏÔÕ ÄÌÑ ÄÒÕËÕ×ÁÎÎÑ ÎÁ ÐÒÉÎÔÅÒ¦."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The %s is unsupported"
-msgstr ""
+msgid "Internet Connection Configuration"
+msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
+msgid "comma separated numbers"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Port: %s"
-msgstr "ðÏÒÔ"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ", "
+msgid "Move selected rule up one level"
msgstr ""
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "ÚÎÁÊÄÅÎÏ %s"
+msgid ""
+"The following scanner\n"
+"\n"
+"%s\n"
+"is available on your system.\n"
+msgstr "õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦!"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " ("
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "÷ÉÂÅÒ¦ÔØ ÇÒÁƦÞÎÕ ÐÌÁÔÕ"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "þÉ ÷É ÈÏÞÅÔÅ ×ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ \"%s\"?"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "þÉ ÔÒÅÂÁ ÷ÁÍ ÎÁÓÔÒϧÔÉ ÄÒÕË?"
+msgid "I can't find any room for installing"
+msgstr "îÅ ÍÏÖÕ ÚÎÁÊÔÉ ×¦ÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ ÄÌÑ ÕÓÔÁÎÏ×ËÉ"
-#: ../../standalone/service_harddrake:1
-#, fuzzy, c-format
-msgid "Hardware probing in progress"
-msgstr "ÚÎÁÊÄÅÎÏ ÎÁ ÐÏÒÔÕ %s"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Default printer"
+msgstr "óÔÁÎÄÁÒÔÎÉÊ ÐÒÉÎÔÅÒ"
-#: ../../standalone/service_harddrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Some devices were added:\n"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
msgstr ""
+"÷É ÎÁÓÔÒϧÌÉ Ë¦ÌØËÁ ÓÐÏÓÏÂ¦× Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÆÏÒÍÁæÊÎÉÍÉ ÔÅÎÅÔÁÍÉ.\n"
+"÷ÉÂÅÒ¦ÔØ ÏÄÉÎ ¦Ú ÎÉÈ, ÑËÉÍ ÷É ÂÕÄÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓØ.\n"
+"\n"
-#: ../../standalone/service_harddrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
+msgid "Modify RAID"
+msgstr "úͦÎÉÔÉ RAID"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
+"úÎÁÊÄÅÎÁ ISDN PCI ÐÌÁÔÁ, ÁÌÅ ÎÅצÄÏÍÏÇÏ ÔÉÐÕ. ÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÏÄÎÕ Ú "
+"ÐÌÁÔ PCI ÎÁ ÎÁÓÔÕÐÎÏÍÕ ÅËÒÁΦ."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../any.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr ""
+msgid "Add user"
+msgstr "äÏÄÁÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr ""
+msgid "RAID-disks %s\n"
+msgstr "äÉÓËÉ RAID %s\n"
-#: ../../share/advertising/02-community.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
+msgid "Liberia"
+msgstr "ì¦ÂÅÒ¦Ñ"
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
msgstr ""
-#: ../../share/advertising/02-community.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+msgid "Choose your keyboard"
+msgstr "÷ÉÂÅÒ¦ÔØ ÔÉÐ ËÌÁצÁÔÕÒÉ"
-#: ../../share/advertising/03-software.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
+msgid "Format partitions"
+msgstr "æÏÒÍÁÔÕ×ÁÔÉ Ð¦ÄÒÏÚĦÌÉ"
-#: ../../share/advertising/03-software.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Automatic correction of CUPS configuration"
+msgstr "á×ÔÏÍÁÔÉÞÎÁ ËÏÎƦ­ÕÒÁÃ¦Ñ CUPS"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Running \"%s\" ..."
+msgstr "óÔÉÒÁÀ ÐÒÉÎÔÅÒ \"%s\" ..."
+
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
+msgid "enable radio support"
msgstr ""
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing to hosts: "
+msgstr "äÒÕË"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Loopback file name: %s"
+msgstr "îÁÚ×É ÆÁÊÌ¦× Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ: %s"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "÷ÉÂÅÒ¦ÔØ ÄÏ ÑËÏÇÏ ÐÏÓ̦ÄÏ×ÎÏÇÏ ÐÏÒÔÁ ЦÄËÌÀÞÅÎÉÊ ÷ÁÛ ÍÏÄÅÍ?"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
+msgid "Do not transfer printers"
+msgstr "îÅ ÐÅÒÅÎÏÓÉÔÉ ÐÒÉÎÔÅÒÉ"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "ðÅÒÅÎ¦Ó ËÏÎƦÇÕÒÁæ§ ÐÒÉÎÔÅÒ¦× "
+msgid "Delay before booting the default image"
+msgstr "ðÁÕÚÁ ÐÅÒÅÄ ÚÁ×ÁÎÔÁÖÅÎÎÑÍ ÏÓÎÏ×Îϧ ÓÉÓÔÅÍÉ"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check for multisession CD"
+msgstr "ëÌÁÃΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁ ЦÄÒÏÚĦ̦"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user"
+msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Hard Disk to backup"
+msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid "A customizable environment"
-msgstr ""
+msgid "Configure"
+msgstr "îÁÓÔÒϧÔÉ"
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scannerdrake"
+msgstr "÷ÉÂÅÒ¦ÔØ ÇÒÁƦÞÎÕ ÐÌÁÔÕ"
+
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgid "Backup Users"
msgstr ""
-#: ../../share/advertising/07-server.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
+"÷×ÅĦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁÚ×Õ ÷ÁÛÏÇÏ ÈÏÓÔÁ. îÁÚ×Á ÈÏÓÔÁ ÐÏ×ÉÎÎÁ ÂÕÔÉ\n"
+"ÐÏ×ΦÓÔÀ Ë×Á̦ƦËÏ×ÁÎÏÀ ÎÁÚ×ÏÀ ÈÏÓÔÁ, ÔÁËÏÀ, ÑË, ÎÁÐÒÉËÌÁÄ,\n"
+"``mybox.mylab.myco.com''.\n"
+"÷É ÔÁËÏÖ ÍÏÖÅÔÅ ××ÅÓÔÉ IP ÁÄÒÅÓÕ ÛÌÀÚÁ ÑËÝÏ ÷É ÔÁËÉÊ ÍÁ¤ÔÅ."
-#: ../../share/advertising/07-server.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr ""
+msgid "Select Printer Spooler"
+msgstr "÷ÉÂÅÒ¦ÔØ ÞÅÒÇÕ ÄÒÕËÕ ÄÌÑ ÐÒÉÎÔÅÒÁ"
-#: ../../share/advertising/08-store.pl:1
-#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Create new theme"
+msgstr "óÔ×ÏÒÉÔÉ ÎÏ×ÉÊ ÒÏÚĦÌ"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The official MandrakeSoft Store"
+msgid "Mandrake Tools Explanation"
msgstr ""
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "No image found"
+msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
+
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
+"äÅÑ˦ ×ÁÖÌÉצ ÐÁËÅÔÉ ÎÅ ÚÍÏÇÌÉ ×¦ÒÎÏ ×ÓÔÁÎÏ×ÉÔÉÓÑ. áÂÏ ÷ÁÛ\n"
+"ËÏÍÐÁËÔ-ÄÉÓË ÁÂÏ ÐÒÉ×¦Ä ÄÅÆÅËÔΦ. ðÅÒÅצÒÔÅ ËÏÍÐÁËÔ ÄÉÓË ÎÁ\n"
+"×ÓÔÁÎÏ×ÌÅÎÏÍÕ ËÏÍÐ'ÀÔÅÒ¦ ËÏÍÁÎÄÏÀ \"rpm -qpl \" \"Mandrake/RPMS/*.rpm\" \n"
-#: ../../share/advertising/09-mdksecure.pl:1
-#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Detected model: %s"
+msgstr "ÚÎÁÊÄÅÎÏ %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
+msgid "if set to yes, run the daily security checks."
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr ""
+msgid "Azerbaijan"
+msgstr "áÚÅÊÂÁÒÖÁÎ"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
+msgid "No tape in %s!"
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "ä×ÏÒÁËÁ (óûá)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
+msgid "How is the printer connected?"
+msgstr "ñË ÐÒÉÎÔÅÒ Ú'¤ÄÎÁÎÉÊ"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Become a MandrakeExpert"
-msgstr "ÅËÓÐÅÒÔ"
-
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
+msgid "Security level"
+msgstr "÷ÓÔÁÎÏ×ÌÅÎÎÑ Ò¦×ÎÑ ÂÅÚÐÅËÉ"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "final resolution"
+msgstr "òÏÚĦÌØÎÁ ÚÄÁÔΦÓÔØ"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, fuzzy, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "ÅËÓÐÅÒÔ"
+msgid "Services"
+msgstr "óÅÒ×ÅÒ"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "4 MB"
+msgstr "4 íÂ"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -17932,10 +17970,6 @@ msgstr ""
"ÔÁÂÌÉæ (kspread, gnumeric), ÐÅÒÅÇÌÑÄÁÞ¦ ÆÁÊÌ¦× pdf, ÔÏÝÏ"
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "òÏÂÏÞÁ ÓÔÁÎæÑ"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "¶ÇÒÏ×Á ÓÔÁÎæÑ"
@@ -18008,10 +18042,6 @@ msgstr ""
"ÄÏÐÏͦÖÎÉÈ ÚÁÓϦ×"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "çÒÁƦÞÎÅ ÓÅÒÅÄÏ×ÉÝÅ"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "òÏÂÏÞÁ ÓÔÁÎÃ¦Ñ Gnome"
@@ -18032,10 +18062,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ÔÏÝÏ"
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "òÏÚÒÏÂÎÉË"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "â¦Â̦ÏÔÅËÉ ÄÌÑ ÐÒÏÇÒÁÍÕ×ÁÎÎÑ × C, C++ ÐÒÏÇÒÁÍÉ ÔÁ ÆÁÊÌÉ ÚÁÇÏÌÏ×˦×"
@@ -18107,40 +18133,82 @@ msgstr "óÅÒ×ÅÒ NFS, ÓÅÒ×ÅÒ SMB, ÐÒÏËÓ¦-ÓÅÒ×ÅÒ, ÓÅÒ×ÅÒ ssh"
#: ../../share/compssUsers:999
#, fuzzy
-msgid "Audio station"
-msgstr "íÕÌØÔÉÍÅĦÊÎÁ ÓÔÁÎæÑ"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"îÁÂ¦Ò ÚÁÓÏÂ¦× ÄÌÑ ÐÒÏÞÉÔÁÎÎÑ ÔÁ ÐÅÒÅÄÁÞ¦ ÅÌÅËÔÒÏÎÎϧ ÐÏÛÔÉ ÔÁ ÇÒÕÐ\n"
+"ÎÏ×ÉÎ (pine, mutt, tin..) ÔÁ ÄÌÑ ÐÅÒÅÇÌÑÄÕ ¦ÎÆÏÒÍÁæÊÎÉÈ ÔÅÎÅÔ"
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ ¦ ËÏÎƦÇÕÒÁæÑ"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "ú×ÕËÏצ ÔÁ צÄÅÏ ÐÒÏÇÒ×ÁÞ¦ ÔÁ ÒÅÄÁËÔÏÒÉ"
+#~ msgid "Configure the connection"
+#~ msgstr "îÁÓÔÒϧÔÉ ÍÅÒÅÖÕ"
+
+#~ msgid "Disconnect"
+#~ msgstr "÷¦Ä'¤ÄÎÁÔÉÓØ"
+
+#~ msgid "Connect"
+#~ msgstr "ú'¤ÄÎÁÔÉÓØ"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "÷É ÍÏÖÅÔÅ ÚͦÎÉÔÉ ÎÁÓÔÒÏÊËÉ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "÷É ÚÁÒÁÚ Ú'¤ÄÎÁΦ Ú ¦ÎÔÅÒÎÅÔÏÍ."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "÷É ÚÁÒÁÚ ÎÅ Ú'¤ÄÎÁΦ Ú ¦ÎÔÅÒÎÅÔÏÍ."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "÷É ÍÏÖÅÔŠצÄ'¤ÄÎÁÔÉÓØ ÁÂÏ ÚͦÎÉÔÉ ËÏÎƦ­ÕÒÁæÀ Ó×Ϥ§ ÍÅÒÅÖ¦."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÓÔÁÎÏ×ÌÅÎÏ."
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video station"
-msgstr "¶ÇÒÏ×Á ÓÔÁÎæÑ"
+#~ msgid "Write %s"
+#~ msgstr "XFree86 %s"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video playing programs"
-msgstr "ú×ÕËÏצ ÔÁ צÄÅÏ ÐÒÏÇÒ×ÁÞ¦ ÔÁ ÒÅÄÁËÔÏÒÉ"
+#~ msgid "Author:"
+#~ msgstr "á×ÔÏÔÅÓÔ"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphic station"
-msgstr "¶ÇÒÏ×Á ÓÔÁÎæÑ"
+#~ msgid "Audio station"
+#~ msgstr "íÕÌØÔÉÍÅĦÊÎÁ ÓÔÁÎæÑ"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphics programs"
-msgstr "çÒÁƦÞΦ ÐÒÏÇÒÁÍÉ - ÔÁ˦ ÑË The Gimp"
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "ú×ÕËÏצ ÔÁ צÄÅÏ ÐÒÏÇÒ×ÁÞ¦ ÔÁ ÒÅÄÁËÔÏÒÉ"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"îÁÂ¦Ò ÚÁÓÏÂ¦× ÄÌÑ ÐÒÏÞÉÔÁÎÎÑ ÔÁ ÐÅÒÅÄÁÞ¦ ÅÌÅËÔÒÏÎÎϧ ÐÏÛÔÉ ÔÁ ÇÒÕÐ\n"
-"ÎÏ×ÉÎ (pine, mutt, tin..) ÔÁ ÄÌÑ ÐÅÒÅÇÌÑÄÕ ¦ÎÆÏÒÍÁæÊÎÉÈ ÔÅÎÅÔ"
+#~ msgid "Video station"
+#~ msgstr "¶ÇÒÏ×Á ÓÔÁÎæÑ"
+
+#, fuzzy
+#~ msgid "Video playing programs"
+#~ msgstr "ú×ÕËÏצ ÔÁ צÄÅÏ ÐÒÏÇÒ×ÁÞ¦ ÔÁ ÒÅÄÁËÔÏÒÉ"
+
+#, fuzzy
+#~ msgid "Graphic station"
+#~ msgstr "¶ÇÒÏ×Á ÓÔÁÎæÑ"
+
+#, fuzzy
+#~ msgid "Graphics programs"
+#~ msgstr "çÒÁƦÞΦ ÐÒÏÇÒÁÍÉ - ÔÁ˦ ÑË The Gimp"
#, fuzzy
#~ msgid "Printer sharing"
@@ -18305,10 +18373,6 @@ msgstr ""
#~ "ÂÕÄÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ LILO, ÔÏĦ ÷ÁÍ ÎÅ ÐÏÔÒ¦ÂÎÁ ÄÉÒÅËÔÏÒ¦Ñ /boot"
#, fuzzy
-#~ msgid "Upgrade"
-#~ msgstr "ðÏÎÏ×ÌÅÎÎÑ"
-
-#, fuzzy
#~ msgid "Do you want to configure another printer?"
#~ msgstr "þÉ ×É ÈÏÞÅÔÅ ×ÉÐÒÏÂÕ×ÁÔÉ ÎÏ×Õ ËÏÎƦ­ÕÒÁæÀ?"
generated by cgit v1.2.1 (git 2.21.0) at 2025-01-23 23:02:12 +0000