sync with code

1 files changed, 265 insertions, 207 deletions

diff --git a/perl-install/share/po/de.po b/perl-install/share/po/de.po
index 977661ae9..277ad6fa7 100644
--- a/perl-install/share/po/de.po
+++ b/perl-install/share/po/de.po
@@ -4,7 +4,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: drakx_share\n"
-"POT-Creation-Date: 2012-12-14 15:17+0100\n"
+"POT-Creation-Date: 2013-04-06 03:21+0200\n"
 "PO-Revision-Date: 2013-01-09 09:58+0100\n"
 "Last-Translator: Oliver Burger <obgr_seneca@mageia.org>\n"
 "Language-Team: German <mageia-i18n@mageia.org>\n"
@@ -15,7 +15,7 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n != 1)\n"
 "X-Generator: Lokalize 1.4\n"
 
-#: any.pm:261 any.pm:971 diskdrake/interactive.pm:645
+#: any.pm:255 any.pm:964 diskdrake/interactive.pm:645
 #: diskdrake/interactive.pm:869 diskdrake/interactive.pm:931
 #: diskdrake/interactive.pm:1036 diskdrake/interactive.pm:1266
 #: diskdrake/interactive.pm:1324 do_pkgs.pm:242 do_pkgs.pm:287
@@ -24,12 +24,12 @@ msgstr ""
 msgid "Please wait"
 msgstr "Bitte warten"
 
-#: any.pm:261
+#: any.pm:255
 #, c-format
 msgid "Bootloader installation in progress"
 msgstr "Installation des Bootloaders ..."
 
-#: any.pm:272
+#: any.pm:266
 #, c-format
 msgid ""
 "LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
@@ -46,14 +46,14 @@ msgstr ""
 "\n"
 "Neue Datenträger-ID zuweisen?"
 
-#: any.pm:283
+#: any.pm:277
 #, c-format
 msgid "Installation of bootloader failed. The following error occurred:"
 msgstr ""
 "Die Installation des Betriebssytemstarters schlug fehl. Folgender Fehler "
 "trat auf:"
 
-#: any.pm:289
+#: any.pm:283
 #, c-format
 msgid ""
 "You may need to change your Open Firmware boot-device to\n"
@@ -71,7 +71,7 @@ msgstr ""
 "Tippen Sie dann: shut-down\n"
 "Beim darauffolgenden Neustart sollte Sie die Eingabeaufforderung sehen."
 
-#: any.pm:329
+#: any.pm:323
 #, c-format
 msgid ""
 "You decided to install the bootloader on a partition.\n"
@@ -87,268 +87,268 @@ msgstr ""
 "\n"
 "Von welchem Laufwerk booten Sie?"
 
-#: any.pm:340
+#: any.pm:334
 #, c-format
 msgid "Bootloader Installation"
 msgstr "Installation des Bootloaders"
 
-#: any.pm:344
+#: any.pm:338
 #, c-format
 msgid "Where do you want to install the bootloader?"
 msgstr "Wo soll der Bootloader installiert werden?"
 
-#: any.pm:368
+#: any.pm:362
 #, c-format
 msgid "First sector (MBR) of drive %s"
 msgstr "Erster Sektor der %s Platte (MBR)"
 
-#: any.pm:370
+#: any.pm:364
 #, c-format
 msgid "First sector of drive (MBR)"
 msgstr "Erster Sektor der Platte (MBR)"
 
-#: any.pm:372
+#: any.pm:366
 #, c-format
 msgid "First sector of the root partition"
 msgstr "Erster Sektor der Root-Partition"
 
-#: any.pm:374
+#: any.pm:368
 #, c-format
 msgid "On Floppy"
 msgstr "Auf Diskette"
 
-#: any.pm:376 pkgs.pm:283 ugtk2.pm:526
+#: any.pm:370 pkgs.pm:283 ugtk2.pm:526
 #, c-format
 msgid "Skip"
 msgstr "Überspringen"
 
-#: any.pm:411
+#: any.pm:405
 #, c-format
 msgid "Boot Style Configuration"
 msgstr "Konfiguration der Boot-Einstellungen"
 
-#: any.pm:427 any.pm:460 any.pm:461
+#: any.pm:420 any.pm:453 any.pm:454
 #, c-format
 msgid "Bootloader main options"
 msgstr "Haupt-Optionen des Bootloaders"
 
-#: any.pm:431
+#: any.pm:424
 #, c-format
 msgid "Bootloader"
 msgstr "Bootloader"
 
-#: any.pm:432 any.pm:464
+#: any.pm:425 any.pm:457
 #, c-format
 msgid "Bootloader to use"
 msgstr "Zu verwendender Bootloader"
 
-#: any.pm:435 any.pm:467
+#: any.pm:428 any.pm:460
 #, c-format
 msgid "Boot device"
 msgstr "Boot-Gerät"
 
-#: any.pm:438
+#: any.pm:431
 #, c-format
 msgid "Main options"
 msgstr "Haupt-Optionen"
 
-#: any.pm:439
+#: any.pm:432
 #, c-format
 msgid "Delay before booting default image"
 msgstr "Wartezeit vor dem Starten des Standard-Betriebssystems"
 
-#: any.pm:440
+#: any.pm:433
 #, c-format
 msgid "Enable ACPI"
 msgstr "ACPI aktivieren"
 
-#: any.pm:441
+#: any.pm:434
 #, c-format
 msgid "Enable SMP"
 msgstr "SMP aktivieren"
 
-#: any.pm:442
+#: any.pm:435
 #, c-format
 msgid "Enable APIC"
 msgstr "APIC aktivieren"
 
-#: any.pm:444
+#: any.pm:437
 #, c-format
 msgid "Enable Local APIC"
 msgstr "Lokales APIC aktivieren"
 
-#: any.pm:445 security/level.pm:63
+#: any.pm:438 security/level.pm:63
 #, c-format
 msgid "Security"
 msgstr "Sicherheit"
 
-#: any.pm:446 any.pm:906 any.pm:925 authentication.pm:249
+#: any.pm:439 any.pm:899 any.pm:918 authentication.pm:249
 #: diskdrake/smbnfs_gtk.pm:181
 #, c-format
 msgid "Password"
 msgstr "Passwort"
 
-#: any.pm:449 authentication.pm:260
+#: any.pm:442 authentication.pm:260
 #, c-format
 msgid "The passwords do not match"
 msgstr "Die Passwörter stimmen nicht überein"
 
-#: any.pm:449 authentication.pm:260 diskdrake/interactive.pm:1499
+#: any.pm:442 authentication.pm:260 diskdrake/interactive.pm:1499
 #, c-format
 msgid "Please try again"
 msgstr "Bitte versuchen Sie es erneut"
 
-#: any.pm:451
+#: any.pm:444
 #, c-format
 msgid "You cannot use a password with %s"
 msgstr "Sie können kein Passwort mit %s benutzen"
 
-#: any.pm:455 any.pm:909 any.pm:927 authentication.pm:250
+#: any.pm:448 any.pm:902 any.pm:920 authentication.pm:250
 #, c-format
 msgid "Password (again)"
 msgstr "Passwort (erneut)"
 
-#: any.pm:456
+#: any.pm:449
 #, c-format
 msgid "Clean /tmp at each boot"
 msgstr " „/tmp“ bei jedem Systemstart säubern"
 
-#: any.pm:466
+#: any.pm:459
 #, c-format
 msgid "Init Message"
 msgstr "Init-Nachricht"
 
-#: any.pm:468
+#: any.pm:461
 #, c-format
 msgid "Open Firmware Delay"
 msgstr "Open-Firmware-Verzögerung"
 
-#: any.pm:469
+#: any.pm:462
 #, c-format
 msgid "Kernel Boot Timeout"
 msgstr "Kernel-Start-Wartezeit"
 
-#: any.pm:470
+#: any.pm:463
 #, c-format
 msgid "Enable CD Boot?"
 msgstr "Booten von CD erlauben?"
 
-#: any.pm:471
+#: any.pm:464
 #, c-format
 msgid "Enable OF Boot?"
 msgstr "Open-Firmware-Start erlauben?"
 
-#: any.pm:472
+#: any.pm:465
 #, c-format
 msgid "Default OS?"
 msgstr "Standard-Betriebssystem?"
 
-#: any.pm:546
+#: any.pm:539
 #, c-format
 msgid "Image"
 msgstr "Abbild"
 
-#: any.pm:547 any.pm:561
+#: any.pm:540 any.pm:554
 #, c-format
 msgid "Root"
 msgstr "Root"
 
-#: any.pm:548 any.pm:574
+#: any.pm:541 any.pm:567
 #, c-format
 msgid "Append"
 msgstr "Hinzufügen / Erweitern"
 
-#: any.pm:550
+#: any.pm:543
 #, c-format
 msgid "Xen append"
 msgstr "Xen hinzufügen"
 
-#: any.pm:552
+#: any.pm:545
 #, c-format
 msgid "Requires password to boot"
 msgstr "Benötigt Passwort zum Booten"
 
-#: any.pm:554
+#: any.pm:547
 #, c-format
 msgid "Video mode"
 msgstr "Video-Modus"
 
-#: any.pm:556
+#: any.pm:549
 #, c-format
 msgid "Initrd"
 msgstr "Init-RamDisk"
 
-#: any.pm:557
+#: any.pm:550
 #, c-format
 msgid "Network profile"
 msgstr "Netzwerk Profil"
 
-#: any.pm:566 any.pm:571 any.pm:573 diskdrake/interactive.pm:411
+#: any.pm:559 any.pm:564 any.pm:566 diskdrake/interactive.pm:411
 #, c-format
 msgid "Label"
 msgstr "Bezeichnung"
 
-#: any.pm:568 any.pm:576 harddrake/v4l.pm:438
+#: any.pm:561 any.pm:569 harddrake/v4l.pm:438
 #, c-format
 msgid "Default"
 msgstr "Standard"
 
-#: any.pm:575
+#: any.pm:568
 #, c-format
 msgid "NoVideo"
 msgstr "NoVideo"
 
-#: any.pm:586
+#: any.pm:579
 #, c-format
 msgid "Empty label not allowed"
 msgstr "Leere Einträge sind nicht erlaubt"
 
-#: any.pm:587
+#: any.pm:580
 #, c-format
 msgid "You must specify a kernel image"
 msgstr "Sie müssen ein Kernel-Image angeben"
 
-#: any.pm:587
+#: any.pm:580
 #, c-format
 msgid "You must specify a root partition"
 msgstr "Sie müssen die Root-Partition festlegen"
 
-#: any.pm:588
+#: any.pm:581
 #, c-format
 msgid "This label is already used"
 msgstr "Dieser Eintrag existiert bereits"
 
-#: any.pm:606
+#: any.pm:599
 #, c-format
 msgid "Which type of entry do you want to add?"
 msgstr "Welche Art Eintrag wollen Sie hinzufügen?"
 
-#: any.pm:607
+#: any.pm:600
 #, c-format
 msgid "Linux"
 msgstr "Linux"
 
-#: any.pm:607
+#: any.pm:600
 #, c-format
 msgid "Other OS (SunOS...)"
 msgstr "Anderes OS (SunOS...)"
 
-#: any.pm:608
+#: any.pm:601
 #, c-format
 msgid "Other OS (MacOS...)"
 msgstr "Anderes OS (MacOS ...)"
 
-#: any.pm:608
+#: any.pm:601
 #, c-format
 msgid "Other OS (Windows...)"
 msgstr "Anderes OS (Windows ...)"
 
-#: any.pm:655
+#: any.pm:648
 #, c-format
 msgid "Bootloader Configuration"
 msgstr "Konfiguration des Bootloaders"
 
-#: any.pm:656
+#: any.pm:649
 #, c-format
 msgid ""
 "Here are the entries on your boot menu so far.\n"
@@ -357,47 +357,47 @@ msgstr ""
 "Hier sind die verschiedenen Einträge.\n"
 "Sie können weitere hinzufügen oder existierende ändern."
 
-#: any.pm:867
+#: any.pm:860
 #, c-format
 msgid "access to X programs"
 msgstr "Zugriff auf X-Programme"
 
-#: any.pm:868
+#: any.pm:861
 #, c-format
 msgid "access to rpm tools"
 msgstr "Zugriff auf RPM-Werkzeuge"
 
-#: any.pm:869
+#: any.pm:862
 #, c-format
 msgid "allow \"su\""
 msgstr "„su“ erlauben"
 
-#: any.pm:870
+#: any.pm:863
 #, c-format
 msgid "access to administrative files"
 msgstr "Zugriff auf Verwaltungsdateien"
 
-#: any.pm:871
+#: any.pm:864
 #, c-format
 msgid "access to network tools"
 msgstr "Zugriff auf Netzwerk-Werkzeuge"
 
-#: any.pm:872
+#: any.pm:865
 #, c-format
 msgid "access to compilation tools"
 msgstr "Zugriff auf Kompilier-Werkzeuge"
 
-#: any.pm:878
+#: any.pm:871
 #, c-format
 msgid "(already added %s)"
 msgstr "(%s wurde bereits hinzugefügt)"
 
-#: any.pm:884
+#: any.pm:877
 #, c-format
 msgid "Please give a user name"
 msgstr "Bitte geben Sie einen Benutzernamen an"
 
-#: any.pm:885
+#: any.pm:878
 #, c-format
 msgid ""
 "The user name must start with a lower case letter followed by only lower "
@@ -406,149 +406,149 @@ msgstr ""
 "Der Benutzername muss mit einem Kleinbuchstaben beginnen und sollte nur aus "
 "Kleinbuchstaben, Ziffern, „-“ und „_“ bestehen."
 
-#: any.pm:886
+#: any.pm:879
 #, c-format
 msgid "The user name is too long"
 msgstr "Dieser Benutzername ist zu lang"
 
-#: any.pm:887
+#: any.pm:880
 #, c-format
 msgid "This user name has already been added"
 msgstr "Dieser Benutzername existiert bereits"
 
-#: any.pm:893 any.pm:929
+#: any.pm:886 any.pm:922
 #, c-format
 msgid "User ID"
 msgstr "Benutzer-ID"
 
-#: any.pm:893 any.pm:930
+#: any.pm:886 any.pm:923
 #, c-format
 msgid "Group ID"
 msgstr "Gruppen-ID"
 
-#: any.pm:894
+#: any.pm:887
 #, c-format
 msgid "%s must be a number"
 msgstr "%s muss eine Zahl sein"
 
-#: any.pm:895
+#: any.pm:888
 #, c-format
 msgid "%s should be above 500. Accept anyway?"
 msgstr "%s sollte größer als 500 sein. Trotzdem akzeptieren?"
 
-#: any.pm:899
+#: any.pm:892
 #, c-format
 msgid "User management"
 msgstr "Benutzerverwaltung"
 
-#: any.pm:904
+#: any.pm:897
 #, c-format
 msgid "Enable guest account"
 msgstr "Den Gastzugang aktivieren"
 
-#: any.pm:905 authentication.pm:236
+#: any.pm:898 authentication.pm:236
 #, c-format
 msgid "Set administrator (root) password"
 msgstr "Administratorpasswort setzen"
 
-#: any.pm:911
+#: any.pm:904
 #, c-format
 msgid "Enter a user"
 msgstr "Benutzer einrichten"
 
-#: any.pm:913
+#: any.pm:906
 #, c-format
 msgid "Icon"
 msgstr "Symbol"
 
-#: any.pm:916
+#: any.pm:909
 #, c-format
 msgid "Real name"
 msgstr "Vollständiger Name"
 
-#: any.pm:923
+#: any.pm:916
 #, c-format
 msgid "Login name"
 msgstr "Benutzername"
 
-#: any.pm:928
+#: any.pm:921
 #, c-format
 msgid "Shell"
 msgstr "Shell"
 
-#: any.pm:971
+#: any.pm:964
 #, c-format
 msgid "Please wait, adding media..."
 msgstr "Bitte warten, füge Medien hinzu ..."
 
-#: any.pm:1003 security/l10n.pm:14
+#: any.pm:996 security/l10n.pm:14
 #, c-format
 msgid "Autologin"
 msgstr "Automatisch anmelden"
 
-#: any.pm:1004
+#: any.pm:997
 #, c-format
 msgid "I can set up your computer to automatically log on one user."
 msgstr ""
 "Ich kann Ihren Computer so einrichten, dass ein Benutzer automatisch "
 "angemeldet wird."
 
-#: any.pm:1005
+#: any.pm:998
 #, c-format
 msgid "Use this feature"
 msgstr "Diese Möglichkeit nutzen"
 
-#: any.pm:1006
+#: any.pm:999
 #, c-format
 msgid "Choose the default user:"
 msgstr "Wählen Sie den Standard-Nutzer:"
 
-#: any.pm:1007
+#: any.pm:1000
 #, c-format
 msgid "Choose the window manager to run:"
 msgstr "Wählen Sie den Window-Manager, den Sie verwenden wollen:"
 
-#: any.pm:1018 any.pm:1032 any.pm:1100
+#: any.pm:1011 any.pm:1025 any.pm:1093
 #, c-format
 msgid "Release Notes"
 msgstr "Versionshinweise"
 
-#: any.pm:1039 any.pm:1389 interactive/gtk.pm:817
+#: any.pm:1032 any.pm:1382 interactive/gtk.pm:821
 #, c-format
 msgid "Close"
 msgstr "Schließen"
 
-#: any.pm:1086
+#: any.pm:1079
 #, c-format
 msgid "License agreement"
 msgstr "Lizenzvereinbarung"
 
-#: any.pm:1088 diskdrake/dav.pm:26
+#: any.pm:1081 diskdrake/dav.pm:26 mygtk2.pm:1222
 #, c-format
 msgid "Quit"
 msgstr "Verlassen"
 
-#: any.pm:1095
+#: any.pm:1088
 #, c-format
 msgid "Do you accept this license ?"
 msgstr "Akzeptieren Sie diese Lizenz?"
 
-#: any.pm:1096
+#: any.pm:1089
 #, c-format
 msgid "Accept"
 msgstr "Akzeptieren"
 
-#: any.pm:1096
+#: any.pm:1089
 #, c-format
 msgid "Refuse"
 msgstr "Ablehnen"
 
-#: any.pm:1122 any.pm:1185
+#: any.pm:1115 any.pm:1178
 #, c-format
 msgid "Please choose a language to use"
 msgstr "Bitte wählen Sie die zu verwendende Sprache"
 
-#: any.pm:1150
+#: any.pm:1143
 #, c-format
 msgid ""
 "%s can support multiple languages. Select\n"
@@ -560,87 +560,87 @@ msgstr ""
 "sein,\n"
 "wenn Ihre Installation beendet ist und Sie das System neu starten."
 
-#: any.pm:1152 fs/partitioning_wizard.pm:174
+#: any.pm:1145 fs/partitioning_wizard.pm:174
 #, c-format
 msgid "Mageia"
 msgstr "Mageia"
 
-#: any.pm:1153
+#: any.pm:1146
 #, c-format
 msgid "Multiple languages"
 msgstr "Mehrere Sprachen"
 
-#: any.pm:1154
+#: any.pm:1147
 #, c-format
 msgid "Select Additional Languages"
 msgstr "Wählen Sie zusätzliche Sprachen aus"
 
-#: any.pm:1163 any.pm:1194
+#: any.pm:1156 any.pm:1187
 #, c-format
 msgid "Old compatibility (non UTF-8) encoding"
 msgstr "Alte (nicht UTF-8) Kodierung"
 
-#: any.pm:1164
+#: any.pm:1157
 #, c-format
 msgid "All languages"
 msgstr "Alle Sprachen"
 
-#: any.pm:1186
+#: any.pm:1179
 #, c-format
 msgid "Language choice"
 msgstr "Sprachauswahl"
 
-#: any.pm:1240
+#: any.pm:1233
 #, c-format
 msgid "Country / Region"
 msgstr "Staat / Region"
 
-#: any.pm:1241
+#: any.pm:1234
 #, c-format
 msgid "Please choose your country"
 msgstr "Bitte wählen Sie Ihr Land"
 
-#: any.pm:1243
+#: any.pm:1236
 #, c-format
 msgid "Here is the full list of available countries"
 msgstr "Hier ist die komplette Liste aller Länder"
 
-#: any.pm:1244
+#: any.pm:1237
 #, c-format
 msgid "Other Countries"
 msgstr "Andere Länder"
 
-#: any.pm:1244 interactive.pm:489 interactive/gtk.pm:445
+#: any.pm:1237 interactive.pm:489 interactive/gtk.pm:445
 #, c-format
 msgid "Advanced"
 msgstr "Fortgeschritten"
 
-#: any.pm:1250
+#: any.pm:1243
 #, c-format
 msgid "Input method:"
 msgstr "Eingabe-Methode:"
 
-#: any.pm:1253
+#: any.pm:1246
 #, c-format
 msgid "None"
 msgstr "Keine"
 
-#: any.pm:1334
+#: any.pm:1327
 #, c-format
 msgid "No sharing"
 msgstr "Keine Freigaben"
 
-#: any.pm:1334
+#: any.pm:1327
 #, c-format
 msgid "Allow all users"
 msgstr "Allen Benutzern erlauben"
 
-#: any.pm:1334
+#: any.pm:1327
 #, c-format
 msgid "Custom"
 msgstr "Benutzerdefiniert"
 
-#: any.pm:1338
+#: any.pm:1331
 #, c-format
 msgid ""
 "Would you like to allow users to share some of their directories?\n"
@@ -655,7 +655,7 @@ msgstr ""
 "\n"
 "Mit „Benutzerdefiniert“ können Sie eine Einstellung pro Benutzer vornehmen.\n"
 
-#: any.pm:1350
+#: any.pm:1343
 #, c-format
 msgid ""
 "NFS: the traditional Unix file sharing system, with less support on Mac and "
@@ -664,7 +664,7 @@ msgstr ""
 "NFS: das traditionelle Unix-Dateisystem für Freigaben im Netz, mit weniger "
 "Unterstützung für Mac und Windows."
 
-#: any.pm:1353
+#: any.pm:1346
 #, c-format
 msgid ""
 "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
@@ -673,7 +673,7 @@ msgstr ""
 "SMB: ein Dateisystem für Freigaben im Netz von Windows, Mac OS X und vielen "
 "modernen Linux-Systemen verwendet"
 
-#: any.pm:1361
+#: any.pm:1354
 #, c-format
 msgid ""
 "You can export using NFS or SMB. Please select which you would like to use."
@@ -681,12 +681,12 @@ msgstr ""
 "Sie können die Dateien mittels SMB oder NFS anbieten. Welche Variante wollen "
 "Sie verwenden?"
 
-#: any.pm:1389
+#: any.pm:1382
 #, c-format
 msgid "Launch userdrake"
 msgstr "UserDrake starten"
 
-#: any.pm:1391
+#: any.pm:1384
 #, c-format
 msgid ""
 "The per-user sharing uses the group \"fileshare\". \n"
@@ -695,7 +695,7 @@ msgstr ""
 "Die Freigaben zwischen Benutzern regelt die Gruppe „fileshare“. \n"
 "Sie können UserDrake verwenden, um Benutzer in diese Gruppe aufzunehmen."
 
-#: any.pm:1498
+#: any.pm:1491
 #, c-format
 msgid ""
 "You need to logout and back in again for changes to take effect. Press OK to "
@@ -704,49 +704,49 @@ msgstr ""
 "Sie müssen sich abmelden und wieder anmelden, damit die Änderungen wirksam "
 "werden. Klicken Sie auf OK, um sich nun abzumelden."
 
-#: any.pm:1502
+#: any.pm:1495
 #, c-format
 msgid "You need to log out and back in again for changes to take effect"
 msgstr ""
 "Sie müssen sich abmelden und wieder anmelden, damit die Änderungen wirksam "
 "werden"
 
-#: any.pm:1537
+#: any.pm:1530
 #, c-format
 msgid "Timezone"
 msgstr "Zeitzone"
 
-#: any.pm:1537
+#: any.pm:1530
 #, c-format
 msgid "Which is your timezone?"
 msgstr "Wählen Sie Ihre Zeitzone"
 
-#: any.pm:1560 any.pm:1562
+#: any.pm:1553 any.pm:1555
 #, c-format
 msgid "Date, Clock & Time Zone Settings"
 msgstr "Datum, Zeit und Zeitzonen Einstellungen"
 
-#: any.pm:1563
+#: any.pm:1556
 #, c-format
 msgid "What is the best time?"
 msgstr "Welches ist die beste Zeit?"
 
-#: any.pm:1567
+#: any.pm:1560
 #, c-format
 msgid "%s (hardware clock set to UTC)"
 msgstr "%s (Hardware Uhr gestellt auf GMT)"
 
-#: any.pm:1568
+#: any.pm:1561
 #, c-format
 msgid "%s (hardware clock set to local time)"
 msgstr "%s (Hardware Uhr gestellt auf Ortszeit)"
 
-#: any.pm:1570
+#: any.pm:1563
 #, c-format
 msgid "NTP Server"
 msgstr "NTP-Server"
 
-#: any.pm:1571
+#: any.pm:1564
 #, c-format
 msgid "Automatic time synchronization (using NTP)"
 msgstr "Automatische Zeit-Synchronisation (durch NTP)"
@@ -1089,7 +1089,7 @@ msgid "Domain Admin Password"
 msgstr "Passwort des Domänen-Administrators"
 
 #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:998
+#: bootloader.pm:1014
 #, c-format
 msgid ""
 "Welcome to the operating system chooser!\n"
@@ -1104,47 +1104,47 @@ msgstr ""
 "oder warten Sie auf das Starten des Standard-Betriebssystems.\n"
 "\n"
 
-#: bootloader.pm:1190
+#: bootloader.pm:1206
 #, c-format
 msgid "LILO with text menu"
 msgstr "LILO mit Textmenü"
 
-#: bootloader.pm:1191
+#: bootloader.pm:1207
 #, c-format
 msgid "GRUB2 with graphical menu"
 msgstr "GRUB2 mit grafischem Menü"
 
-#: bootloader.pm:1192
+#: bootloader.pm:1208
 #, c-format
 msgid "GRUB with graphical menu"
 msgstr "GRUB mit grafischem Menü"
 
-#: bootloader.pm:1193
+#: bootloader.pm:1209
 #, c-format
 msgid "GRUB with text menu"
 msgstr "GRUB mit Textmenü"
 
-#: bootloader.pm:1194
+#: bootloader.pm:1210
 #, c-format
 msgid "Yaboot"
 msgstr "Yaboot"
 
-#: bootloader.pm:1195
+#: bootloader.pm:1211
 #, c-format
 msgid "SILO"
 msgstr "SILO"
 
-#: bootloader.pm:1281
+#: bootloader.pm:1297
 #, c-format
 msgid "not enough room in /boot"
 msgstr "Sie haben nicht genug Platz in /boot"
 
-#: bootloader.pm:2030
+#: bootloader.pm:2079
 #, c-format
 msgid "You cannot install the bootloader on a %s partition\n"
 msgstr "Sie können den Bootloader nicht auf einer %s-Partition installieren.\n"
 
-#: bootloader.pm:2197
+#: bootloader.pm:2248
 #, c-format
 msgid ""
 "Your bootloader configuration must be updated because partition has been "
@@ -1153,7 +1153,7 @@ msgstr ""
 "Ihre Bootloaderkonfiguration muss geändert werden, da sich Ihre "
 "Partitionsnummerierung geändert hat"
 
-#: bootloader.pm:2210
+#: bootloader.pm:2261
 #, c-format
 msgid ""
 "The bootloader cannot be installed correctly. You have to boot rescue and "
@@ -1162,7 +1162,7 @@ msgstr ""
 "Der Bootloader kann nicht richtig installiert werden. Sie müssen ins "
 "Rettungssystem booten und „%s“ wählen"
 
-#: bootloader.pm:2211
+#: bootloader.pm:2262
 #, c-format
 msgid "Re-install Boot Loader"
 msgstr "Bootloader neu installieren"
@@ -1261,7 +1261,7 @@ msgstr "Einhängepunkt"
 msgid "Options"
 msgstr "Optionen"
 
-#: diskdrake/dav.pm:68 interactive.pm:388 interactive/gtk.pm:453
+#: diskdrake/dav.pm:68 interactive.pm:388 interactive/gtk.pm:457
 #, c-format
 msgid "Remove"
 msgstr "Entfernen"
@@ -1369,7 +1369,7 @@ msgid "Continue"
 msgstr "Fortfahren"
 
 #: diskdrake/hd_gtk.pm:188 fs/partitioning_wizard.pm:555 interactive.pm:654
-#: interactive/gtk.pm:809 interactive/gtk.pm:827 interactive/gtk.pm:848
+#: interactive/gtk.pm:813 interactive/gtk.pm:831 interactive/gtk.pm:862
 #: ugtk2.pm:936
 #, c-format
 msgid "Help"
@@ -1491,7 +1491,7 @@ msgid "More"
 msgstr "Mehr"
 
 #: diskdrake/interactive.pm:281 diskdrake/interactive.pm:294
-#: diskdrake/interactive.pm:1293
+#: diskdrake/interactive.pm:1293 mygtk2.pm:1221
 #, c-format
 msgid "Confirmation"
 msgstr "Bestätigung"
@@ -2305,8 +2305,8 @@ msgstr "Typ ändern"
 
 #: diskdrake/smbnfs_gtk.pm:81 interactive.pm:130 interactive.pm:551
 #: interactive/curses.pm:267 interactive/http.pm:104 interactive/http.pm:160
-#: interactive/stdio.pm:39 interactive/stdio.pm:148 mygtk2.pm:846 ugtk2.pm:415
-#: ugtk2.pm:517 ugtk2.pm:526 ugtk2.pm:812
+#: interactive/stdio.pm:39 interactive/stdio.pm:148 mygtk2.pm:846
+#: mygtk2.pm:1222 ugtk2.pm:415 ugtk2.pm:517 ugtk2.pm:526 ugtk2.pm:812
 #, c-format
 msgid "Cancel"
 msgstr "Abbrechen"
@@ -2843,13 +2843,13 @@ msgstr "Hier sehen Sie den Inhalt ihres Festplattenlaufwerkes "
 msgid "Partitioning failed: %s"
 msgstr "Partitionierunsgfehler: %s"
 
-#: fs/type.pm:389
+#: fs/type.pm:390
 #, c-format
 msgid "You cannot use JFS for partitions smaller than 16MB"
 msgstr ""
 "Sie können JFS nicht für Partitionen nutzen, die kleiner als 16 MB sind."
 
-#: fs/type.pm:390
+#: fs/type.pm:391
 #, c-format
 msgid "You cannot use ReiserFS for partitions smaller than 32MB"
 msgstr ""
@@ -3304,7 +3304,7 @@ msgstr ""
 "Hier können Sie einen alternativen Treiber (entweder OSS oder ALSA) für Ihre "
 "Soundkarte (%s) auswählen"
 
-#. -PO: here the first %s is either "OSS" or "ALSA",
+#. -PO: here the first %s is either "OSS" or "ALSA", 
 #. -PO: the second %s is the name of the current driver
 #. -PO: and the third %s is the name of the default driver
 #: harddrake/sound.pm:369
@@ -3354,7 +3354,7 @@ msgstr ""
 "- die alte OSS-Kompatibilitäts-API - die neue ALSA-API, die viele erweiterte "
 "Funktionen bietet, aber die Benutzung der ALSA-Bibliothek erfordert.\n"
 
-#: harddrake/sound.pm:385 harddrake/sound.pm:468
+#: harddrake/sound.pm:385 harddrake/sound.pm:487
 #, c-format
 msgid "Driver:"
 msgstr "Treiber:"
@@ -3407,62 +3407,74 @@ msgstr "Soundprobleme beheben"
 #: harddrake/sound.pm:430
 #, c-format
 msgid ""
-"The classic bug sound tester is to run the following commands:\n"
+"Below are some basic tips to help debug audio problems, but for accurate and "
+"up-to-date tips and tricks, please see:\n"
 "\n"
+"https://wiki.mageia.org/en/Support:DebuggingSoundProblems\n"
 "\n"
-"- \"lspcidrake -v | fgrep -i AUDIO\" will tell you which driver your card "
-"uses\n"
-"by default\n"
 "\n"
-"- \"grep sound-slot /etc/modprobe.conf\" will tell you what driver it\n"
-"currently uses\n"
 "\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"- General Recommendation: Enable PulseAudio. If you have opted to not to use "
+"PulseAudio, we would strongly advise you enable it. For the vast majority of "
+"desktop use cases, PulseAudio is the recommended and best supported option.\n"
 "\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services are configured to be run on\n"
-"initlevel 3\n"
 "\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
 "\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
-"Der klassische Test, um Fehler im Sound-System zu finden:\n"
+"- \"kmix\" (KDE), \"gnome-control-center sound\" (GNOME) and \"pauvucontrol"
+"\" (generic) will launch graphical applications to allow you to view your "
+"sound devices and adjust volume levels\n"
+"\n"
+"\n"
+"- \"ps aux | grep pulseaudio\" will check that PulseAudio is running.\n"
+"\n"
+"\n"
+"- \"pactl stat\" will check that you can connect to the PulseAudio daemon "
+"correctly.\n"
+"\n"
 "\n"
+"- \"pactl list sink-inputs\" will tell you which programs are currently "
+"playing sound via PulseAudio.\n"
 "\n"
-"- „lspcidrake -v | fgrep -i AUDIO“ verrät Ihnen, welcher Treiber Ihre "
-"Soundkarte \n"
-"  standardmäßig verwendet.\n"
 "\n"
-"- \"grep sound-slot /etc/modprobe.conf\" sagt Ihnen, welchen Treiber Ihre "
-"Soundkarte momentan benutzt. \n"
+"- \"systemctl status osspd.service\" will tell you the current state of the "
+"OSS Proxy Daemon. This is used to enable sound from legacy applications "
+"which use the OSS sound API. You should install the \"ossp\" package if you "
+"need this functionality.\n"
 "\n"
-"- \"/sbin/lsmod\" erlaubt es Ihnen zu überprüfen, ob das entsprechende Modul "
-"(Treiber) geladen ist. \n"
 "\n"
-"- „/sbin/chkconfig --list sound“ und „/sbin/chkconfig --list alsa“ verraten\n"
-"  Ihnen, ob die Sound- und ALSA-Dienste konfiguriert sind, um im\n"
-"  Initlevel 3 zu laufen.\n"
+"- \"pacmd ls\" will give you a LOT of debug information about the current "
+"state of your audio.\n"
 "\n"
-"- \"aumix -q\" sagt Ihnen, ob die Sound-Ausgabe stummgeschaltet wurde oder "
-"nicht. \n"
 "\n"
-"- „/sbin/fuser -v /dev/dsp“ verrät das Programm, das die Soundkarte "
-"benutzt.\n"
+"- \"lspcidrake -v | grep -i audio\" will tell you which low-level driver "
+"your card uses by default.\n"
+"\n"
+"\n"
+"- \"/usr/sbin/lsmod | grep snd\" will enable you to check which sound "
+"related kernel modules (drivers) are loaded.\n"
+"\n"
+"\n"
+"- \"alsamixer -c 0\" will give you a text-based mixer to the low level ALSA "
+"mixer controls for first sound card\n"
+"\n"
+"\n"
+"- \"/usr/sbin/fuser -v /dev/snd/pcm* /dev/dsp\" will tell which programs are "
+"currently using the sound card directly (normally this should only show "
+"PulseAudio)\n"
+msgstr ""
 
-#: harddrake/sound.pm:457
+#: harddrake/sound.pm:476
 #, c-format
 msgid "Let me pick any driver"
 msgstr "Soll irgendeinen Treiber ausgewählt werden?"
 
-#: harddrake/sound.pm:460
+#: harddrake/sound.pm:479
 #, c-format
 msgid "Choosing an arbitrary driver"
 msgstr "Einen willkürlicher Treiber wird gewählt"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:463
+#: harddrake/sound.pm:482
 #, c-format
 msgid ""
 "If you really think that you know which driver is the right one for your "
@@ -3543,12 +3555,12 @@ msgstr "Nein"
 msgid "Choose a file"
 msgstr "Wählen Sie eine Datei"
 
-#: interactive.pm:388 interactive/gtk.pm:453
+#: interactive.pm:388 interactive/gtk.pm:457
 #, c-format
 msgid "Add"
 msgstr "Hinzufügen"
 
-#: interactive.pm:388 interactive/gtk.pm:453
+#: interactive.pm:388 interactive/gtk.pm:457
 #, c-format
 msgid "Modify"
 msgstr "Ändern"
@@ -3583,7 +3595,7 @@ msgstr "Das Verzeichnis existiert nicht"
 msgid "No such file"
 msgstr "Die Datei existiert nicht"
 
-#: interactive/gtk.pm:592
+#: interactive/gtk.pm:596
 #, c-format
 msgid "Beware, Caps Lock is enabled"
 msgstr "Achtung, die „Feststelltaste“ ist aktiviert"
@@ -4871,17 +4883,17 @@ msgstr ""
 "Das Verschieben der verwendeten physischen Erweiterungen auf andere "
 "physische Datenträger ist fehlgeschlagen"
 
-#: lvm.pm:149
+#: lvm.pm:152
 #, c-format
 msgid "Physical volume %s is still in use"
 msgstr "Der physische Datenträger %s wird noch verwendet"
 
-#: lvm.pm:159
+#: lvm.pm:162
 #, c-format
 msgid "Remove the logical volumes first\n"
 msgstr "Entfernen Sie erst die logischen Geräte\n"
 
-#: lvm.pm:202
+#: lvm.pm:205
 #, c-format
 msgid "The bootloader can't handle /boot on multiple physical volumes"
 msgstr ""
@@ -5074,11 +5086,9 @@ msgstr ""
 "Die meisten der Lizenzen erlauben es, die Komponenten, die diesen Lizenzen "
 "unterliegen, zu benutzen, zu duplizieren, anzupassen, und weiterzugeben. "
 "Bitte lesen sie sorgfältig die Bedingungen der Lizenzabkommen jeder "
-"Komponente, "
-"bevor Sie sie benutzen.\n"
+"Komponente, bevor Sie sie benutzen.\n"
 "Jegliche Frage zur Lizenz einer Komponente ist an den Lizenzgeber oder "
-"Vertreiber "
-"der Komponente und nicht an Mageia zu richten.\n"
+"Vertreiber der Komponente und nicht an Mageia zu richten.\n"
 "Die von Mageia erstellten Programme unterliegen der GPL.\n"
 "Von Mageia geschriebene Dokumentation unterliegt einer \"%s\" Lizenz."
 
@@ -5334,12 +5344,12 @@ msgstr "Sind Sie sicher, dass Sie beenden möchten?"
 msgid "Password is trivial to guess"
 msgstr "Das Passwort ist zu einfach zu erraten"
 
-#: mygtk2.pm:1542
+#: mygtk2.pm:1565
 #, c-format
 msgid "Password should be resistant to basic attacks"
 msgstr "Passwörter sollten grundlegenden Angriffen widerstehen können"
 
-#: mygtk2.pm:1543 mygtk2.pm:1544
+#: mygtk2.pm:1566 mygtk2.pm:1567
 #, c-format
 msgid "Password seems secure"
 msgstr "Das Passwort scheint sicher zu sein"
@@ -5581,8 +5591,8 @@ msgid ""
 "\n"
 "- none if set to \"None\".\n"
 "\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
-"(5))."
+"To authorize the services you need, use /etc/hosts.allow (see hosts."
+"allow(5))."
 msgstr ""
 "Autorisieren:\n"
 "\n"
@@ -6792,7 +6802,7 @@ msgstr "Fernwartung"
 msgid "Database Server"
 msgstr "Datenbankserver"
 
-#: services.pm:188 services.pm:227
+#: services.pm:188 services.pm:225
 #, c-format
 msgid "Services"
 msgstr "Dienste"
@@ -6809,22 +6819,22 @@ msgstr ""
 msgid "%d activated for %d registered"
 msgstr "%d aktiviert von %d registrierten"
 
-#: services.pm:243
+#: services.pm:241
 #, c-format
 msgid "running"
 msgstr "aktiv"
 
-#: services.pm:243
+#: services.pm:241
 #, c-format
 msgid "stopped"
 msgstr "gestoppt"
 
-#: services.pm:248
+#: services.pm:246
 #, c-format
 msgid "Services and daemons"
 msgstr "Dienste und Dämonen"
 
-#: services.pm:254
+#: services.pm:252
 #, c-format
 msgid ""
 "No additional information\n"
@@ -6834,27 +6844,27 @@ msgstr ""
 "weiteren Informationen zu\n"
 "diesem Dienst."
 
-#: services.pm:259 ugtk2.pm:924
+#: services.pm:257 ugtk2.pm:924
 #, c-format
 msgid "Info"
 msgstr "Info"
 
-#: services.pm:262
+#: services.pm:260
 #, c-format
 msgid "Start when requested"
 msgstr "Starten wenn verlangt"
 
-#: services.pm:262
+#: services.pm:260
 #, c-format
 msgid "On boot"
 msgstr "Beim Systemstart"
 
-#: services.pm:280
+#: services.pm:278
 #, c-format
 msgid "Start"
 msgstr "Start"
 
-#: services.pm:280
+#: services.pm:278
 #, c-format
 msgid "Stop"
 msgstr "Stopp"
@@ -7195,6 +7205,54 @@ msgid "Installation failed"
 msgstr "Die Installation schlug fehl"
 
 #~ msgid ""
+#~ "The classic bug sound tester is to run the following commands:\n"
+#~ "\n"
+#~ "\n"
+#~ "- \"lspcidrake -v | fgrep -i AUDIO\" will tell you which driver your card "
+#~ "uses\n"
+#~ "by default\n"
+#~ "\n"
+#~ "- \"grep sound-slot /etc/modprobe.conf\" will tell you what driver it\n"
+#~ "currently uses\n"
+#~ "\n"
+#~ "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+#~ "loaded or not\n"
+#~ "\n"
+#~ "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" "
+#~ "will\n"
+#~ "tell you if sound and alsa services are configured to be run on\n"
+#~ "initlevel 3\n"
+#~ "\n"
+#~ "- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+#~ "\n"
+#~ "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound "
+#~ "card.\n"
+#~ msgstr ""
+#~ "Der klassische Test, um Fehler im Sound-System zu finden:\n"
+#~ "\n"
+#~ "\n"
+#~ "- „lspcidrake -v | fgrep -i AUDIO“ verrät Ihnen, welcher Treiber Ihre "
+#~ "Soundkarte \n"
+#~ "  standardmäßig verwendet.\n"
+#~ "\n"
+#~ "- \"grep sound-slot /etc/modprobe.conf\" sagt Ihnen, welchen Treiber Ihre "
+#~ "Soundkarte momentan benutzt. \n"
+#~ "\n"
+#~ "- \"/sbin/lsmod\" erlaubt es Ihnen zu überprüfen, ob das entsprechende "
+#~ "Modul (Treiber) geladen ist. \n"
+#~ "\n"
+#~ "- „/sbin/chkconfig --list sound“ und „/sbin/chkconfig --list alsa“ "
+#~ "verraten\n"
+#~ "  Ihnen, ob die Sound- und ALSA-Dienste konfiguriert sind, um im\n"
+#~ "  Initlevel 3 zu laufen.\n"
+#~ "\n"
+#~ "- \"aumix -q\" sagt Ihnen, ob die Sound-Ausgabe stummgeschaltet wurde "
+#~ "oder nicht. \n"
+#~ "\n"
+#~ "- „/sbin/fuser -v /dev/dsp“ verrät das Programm, das die Soundkarte "
+#~ "benutzt.\n"
+
+#~ msgid ""
 #~ "Launch packet filtering for Linux kernel 2.2 series, to set\n"
 #~ "up a firewall to protect your machine from network attacks."
 #~ msgstr ""