summaryrefslogtreecommitdiffstats
path: root/perl-install/printer/main.pm
diff options
context:
space:
mode:
authorTill Kamppeter <tkamppeter@mandriva.com>2005-08-24 02:14:56 +0000
committerTill Kamppeter <tkamppeter@mandriva.com>2005-08-24 02:14:56 +0000
commit3e898408234f355d5263d91472e3e382e27cbcc6 (patch)
tree8ba10723921a34aa2d5374dfe1e4908282c97d9c /perl-install/printer/main.pm
parent397c69f76b8dc19be6347ea7885ab97e1c9c9d7c (diff)
downloaddrakx-3e898408234f355d5263d91472e3e382e27cbcc6.tar
drakx-3e898408234f355d5263d91472e3e382e27cbcc6.tar.gz
drakx-3e898408234f355d5263d91472e3e382e27cbcc6.tar.bz2
drakx-3e898408234f355d5263d91472e3e382e27cbcc6.tar.xz
drakx-3e898408234f355d5263d91472e3e382e27cbcc6.zip
- Added support for pre-built PPDs for non-PostScript drivers,
especially PCL-XL PPDs from Ricoh.
Diffstat (limited to 'perl-install/printer/main.pm')
-rw-r--r--perl-install/printer/main.pm124
1 files changed, 109 insertions, 15 deletions
diff --git a/perl-install/printer/main.pm b/perl-install/printer/main.pm
index 30da7852d..f5fc2c37d 100644
--- a/perl-install/printer/main.pm
+++ b/perl-install/printer/main.pm
@@ -38,6 +38,7 @@ our %printer_type = (
our %printer_type_inv = reverse %printer_type;
our %thedb;
+our %linkedppds;
our $hplipdevicesdb;
@@ -499,11 +500,18 @@ sub read_printer_db {
"foomatic-configure -O -q |") or
die "Could not run foomatic-configure";
+ %linkedppds = ();
my $entry = {};
+ @{$entry->{drivers}} = ();
my $inentry = 0;
my $indrivers = 0;
+ my $inppds = 0;
+ my $inppd = 0;
my $inautodetect = 0;
my $autodetecttype = "";
+ my $ppds = {};
+ my $ppddriver = "";
+ my $ppdfile = "";
local $_;
while (<$DBPATH>) {
chomp;
@@ -517,6 +525,31 @@ sub read_printer_db {
} elsif (m!^\s*<driver>(.+)</driver>\s*$!) {
push @{$entry->{drivers}}, $1;
}
+ } elsif ($inppds) {
+ # We are inside the ppds block of a printers entry
+ if ($inppd) {
+ # We are inside a PPD entry in the ppds block
+ if (m!^\s*</ppd>\s*$!) {
+ # End of ppds block
+ $inppd = 0;
+ if ($ppddriver && $ppdfile) {
+ $ppds->{$ppddriver} = $ppdfile;
+ }
+ $ppddriver = "";
+ $ppdfile = "";
+ } elsif (m!^\s*<driver>(.+)</driver>\s*$!) {
+ $ppddriver = $1;
+ } elsif (m!^\s*<ppdfile>(.+)</ppdfile>\s*$!) {
+ $ppdfile = $1;
+ }
+ } else {
+ if (m!^\s*</ppds>\s*$!) {
+ # End of ppds block
+ $inppds = 0;
+ } elsif (m!^\s*<ppd>\s*$!) {
+ $inppd = 1;
+ }
+ }
} elsif ($inautodetect) {
# We are inside the autodetect block of a printers entry
# All entries inside this block will be ignored
@@ -580,6 +613,13 @@ sub read_printer_db {
$entry->{ENTRY} =~
s/^KYOCERA[\s\-]*MITA/KYOCERA/i;
$entry->{driver} = $driver;
+ if (defined($ppds->{$driver})) {
+ $entry->{ppd} = $ppds->{$driver};
+ $ppds->{$driver} =~ m!([^/]+)$!;
+ $linkedppds{$1} = $entry->{ENTRY};
+ } else {
+ undef $entry->{ppd};
+ }
# Duplicate contents of $entry because it is multiply entered to the database
map { $thedb{$entry->{ENTRY}}{$_} = $entry->{$_} } keys %$entry;
}
@@ -592,11 +632,21 @@ sub read_printer_db {
$entry->{ENTRY} =~
s/^KYOCERA[\s\-]*MITA/KYOCERA/i;
if ($entry->{defaultdriver}) {
- $entry->{driver} = $entry->{defaultdriver};
+ my $driver = $entry->{defaultdriver};
+ $entry->{driver} = $driver;
+ if (defined($ppds->{$driver})) {
+ $entry->{ppd} = $ppds->{$driver};
+ $ppds->{$driver} =~ m!([^/]+)$!;
+ $linkedppds{$1} = $entry->{ENTRY};
+ } else {
+ undef $entry->{ppd};
+ }
map { $thedb{$entry->{ENTRY}}{$_} = $entry->{$_} } keys %$entry;
}
}
$entry = {};
+ @{$entry->{drivers}} = ();
+ $ppds = {};
} elsif (m!^\s*<id>\s*([^\s<>]+)\s*</id>\s*$!) {
# Foomatic printer ID
$entry->{printer} = $1;
@@ -612,7 +662,9 @@ sub read_printer_db {
} elsif (m!^\s*<drivers>\s*$!) {
# Drivers block
$indrivers = 1;
- @{$entry->{drivers}} = ();
+ } elsif (m!^\s*<ppds>\s*$!) {
+ # PPDs block
+ $inppds = 1;
} elsif (m!^\s*<autodetect>\s*$!) {
# Autodetect block
$inautodetect = 1;
@@ -1632,7 +1684,7 @@ sub ppd_entry_str {
$descr =~ s/CUPS\+Gimp-Print/CUPS + Gimp-Print/i;
} elsif ($descr =~ /Series CUPS/i) {
$descr =~ s/Series CUPS/Series, CUPS/i;
- } elsif ($descr !~ /(PostScript|GhostScript|CUPS|Foomatic)/i) {
+ } elsif ($descr !~ /(PostScript|GhostScript|CUPS|Foomatic|PCL|PXL)/i) {
$descr .= ", PostScript";
}
# Split model and driver
@@ -1642,20 +1694,26 @@ sub ppd_entry_str {
/^\s*(Generic\s*PostScript\s*Printer)\s*,?\s*(.*)$/i ||
$descr =~
/^\s*(PostScript\s*Printer)\s*,?\s*(.*)$/i ||
- $descr =~ /^([^,]+[^,\s])\s*,?\s*(Foomatic.*)$/i ||
- $descr =~ /^([^,]+[^,\s])\s*,?\s*(GhostScript.*)$/i ||
- $descr =~ /^([^,]+[^,\s])\s*,?\s*(CUPS.*)$/i ||
- $descr =~ /^([^,]+[^,\s])\s*,?\s+(PS.*)$/i ||
+ $descr =~ /^([^,]+?)\s*,?\s*(Foomatic.*)$/i ||
+ $descr =~ /^([^,]+?)\s*,?\s*(GhostScript.*)$/i ||
+ $descr =~ /^([^,]+?)\s*,?\s*(CUPS.*)$/i ||
+ $descr =~ /^([^,]+?)\s*,\s+(PS.*)$/i ||
+ $descr =~ /^([^,]+?)\s*,\s+(PXL.*)$/i ||
+ $descr =~ /^([^,]+?)\s*,\s+(PCL.*)$/i ||
$descr =~
- /^([^,]+[^,\s])\s*,?\s*(\(v?\.?\s*\d\d\d\d\.\d\d\d\).*)$/i ||
- $descr =~ /^([^,]+[^,\s])\s*,?\s*(v\d+\.\d+.*)$/i ||
- $descr =~ /^([^,]+[^,\s])\s*,?\s*(PostScript.*)$/i ||
- $descr =~ /^([^,]+)\s*,?\s*(.+)$/) {
+ /^([^,]+?)\s*,?\s*(\(v?\.?\s*\d\d\d\d\.\d\d\d\).*)$/i ||
+ $descr =~ /^([^,]+?)\s*,?\s*(v?\.?\s*\d+\.\d+.*)$/i ||
+ $descr =~ /^([^,]+?)\s*,?\s*(PostScript.*)$/i ||
+ $descr =~ /^([^,]+?)\s*,\s*(.+?)$/) {
$model = $1;
$driver = $2;
$model =~ s/[\-\s,]+$//;
$driver =~ s/\b(PS|PostScript\b)/PostScript/gi;
$driver =~ s/(PostScript)(.*)(PostScript)/$1$2/i;
+ $driver =~ s/\b(PXL|PCL[\s\-]*(6|XL)\b)/PCL-XL/gi;
+ $driver =~ s/(PCL-XL)(.*)(PCL-XL)/$1$2/i;
+ $driver =~ s/\b(PCL[\s\-]*(|4|5|5c|5e)\b)/PCL/gi;
+ $driver =~ s/(PCL)(.*)(PCL)/$1$2/i;
$driver =~
s/^\s*(\(?v?\.?\s*\d\d\d\d\.\d\d\d\)?|v\d+\.\d+)([,\s]*)(.*?)\s*$/$3$2$1/i;
$driver =~ s/,\s*\(/ (/g;
@@ -1669,7 +1727,13 @@ sub ppd_entry_str {
} else {
# Some PPDs do not have the ", <driver>" part.
$model = $descr;
- $driver = "PostScript";
+ if ($model =~ /\b(PXL|PCL[\s\-]*(6|XL))\b/i) {
+ $driver = "PCL-XL";
+ } elsif ($model =~ /\b(PCL[\s\-]*(|4|5|5c|5e)\b)/i) {
+ $driver = "PCL";
+ } else {
+ $driver = "PostScript";
+ }
}
}
# Remove manufacturer's name from the beginning of the model
@@ -1695,7 +1759,7 @@ sub ppd_entry_str {
$model =~ s/Oki\s+//i;
}
# Try again to remove manufacturer's name from the beginning of the
- # model name, this with the cleaned manufacturer name
+ # model name, this time with the cleaned manufacturer name
$model =~ s/^$mf[\s\-]+//i
if $mf && $mf !~ m![\\/\(\)\[\]\|\.\$\@\%\*\?]!;
# Translate "(recommended)" in the driver string
@@ -1814,10 +1878,34 @@ sub poll_ppd_base {
$key = $keynolang;
}
my ($devidmake, $devidmodel, $deviddesc, $devidcmdset);
- if (!$printer->{expert}) {
+ # Replace an existing printer entry if it has linked
+ # to the current PPD file.
+ my ($filename, $ppdkey);
+ $ppd =~ m!([^/]+\.ppd)(\.gz|\.bz2|)$!;
+ if (($filename = $1) &&
+ ($ppdkey = $linkedppds{$filename}) &&
+ (defined($thedb{$ppdkey}))) {
+ # Save the autodetection data
+ $devidmake = $thedb{$ppdkey}{devidmake};
+ $devidmodel = $thedb{$ppdkey}{devidmodel};
+ $deviddesc = $thedb{$ppdkey}{deviddesc};
+ $devidcmdset = $thedb{$ppdkey}{devidcmdset};
+ # Remove the old entry
+ delete $thedb{$ppdkey};
+ if (!$printer->{expert}) {
+ # Remove driver part in recommended mode
+ $key =~ s/^([^\|]+\|[^\|]+)\|.*$/$1/;
+ } else {
+ # If the Foomatic entry is "recommended" let
+ # the new PPD entry be "recommended"
+ $key =~ s/\s*$sprecstr//g;
+ $key .= " $precstr" if $ppdkey =~ m!$precstr!;
+ }
+ } elsif (!$printer->{expert}) {
# Remove driver from printer list entry when in
# recommended mode
$key =~ s/^([^\|]+\|[^\|]+)\|.*$/$1/;
+
# Only replace an existing printer entry if
# - its driver is not the same as the driver of the
# new one
@@ -1901,7 +1989,7 @@ sub poll_ppd_base {
} keys %thedb)) {
# Expert mode: Foomatic driver other than "Foomatic +
# Postscript" is recommended and there was a PostScript
- # PPD which was recommended? Make The Foomatic driver
+ # PPD which was recommended? Make the Foomatic driver
# the recommended one
foreach my $sourcekey (@foundkeys) {
# Remove the "recommended" tag
@@ -1913,6 +2001,12 @@ sub poll_ppd_base {
delete $thedb{$sourcekey};
}
}
+
+ # Remove duplicate "recommended" tags and have the
+ # "recommended" tag at the end
+ $key =~ s/(\s*$sprecstr)(.*?)(\s*$sprecstr)/$2$3/;
+ $key =~ s/(\s*$sprecstr)(.+)$/$2$1/;
+ # Create the new entry
$thedb{$key}{ppd} = $ppd;
$thedb{$key}{make} = $mf;
$thedb{$key}{model} = $model;