diff options
author | Pascal Rigaux <pixel@mandriva.com> | 2005-05-06 02:43:04 +0000 |
---|---|---|
committer | Pascal Rigaux <pixel@mandriva.com> | 2005-05-06 02:43:04 +0000 |
commit | 4e506c9aefe5b89970ae6894d05ad53c81af0d83 (patch) | |
tree | 2fac98df209e72eaba773cad2d7b90c99d9d9249 /mdk-stage1/dietlibc/include/sys/mtio.h | |
parent | 793707b39bf2e9df40a6d2d60b83b3061088ae9e (diff) | |
download | drakx-4e506c9aefe5b89970ae6894d05ad53c81af0d83.tar drakx-4e506c9aefe5b89970ae6894d05ad53c81af0d83.tar.gz drakx-4e506c9aefe5b89970ae6894d05ad53c81af0d83.tar.bz2 drakx-4e506c9aefe5b89970ae6894d05ad53c81af0d83.tar.xz drakx-4e506c9aefe5b89970ae6894d05ad53c81af0d83.zip |
use installed dietlibc, not our forked cvs version
Diffstat (limited to 'mdk-stage1/dietlibc/include/sys/mtio.h')
-rw-r--r-- | mdk-stage1/dietlibc/include/sys/mtio.h | 340 |
1 files changed, 0 insertions, 340 deletions
diff --git a/mdk-stage1/dietlibc/include/sys/mtio.h b/mdk-stage1/dietlibc/include/sys/mtio.h deleted file mode 100644 index 08c735dcc..000000000 --- a/mdk-stage1/dietlibc/include/sys/mtio.h +++ /dev/null @@ -1,340 +0,0 @@ -#ifndef _SYS_MTIO_H -#define _SYS_MTIO_H - -#include <sys/ioctl.h> - -/* structure for MTIOCTOP - mag tape op command */ -struct mtop { - short int mt_op; /* operations defined below */ - int mt_count; /* how many of them */ -}; - -/* Magnetic Tape operations [Not all operations supported by all drivers]: */ -#define MTRESET 0 /* +reset drive in case of problems */ -#define MTFSF 1 /* forward space over FileMark, - * position at first record of next file - */ -#define MTBSF 2 /* backward space FileMark (position before FM) */ -#define MTFSR 3 /* forward space record */ -#define MTBSR 4 /* backward space record */ -#define MTWEOF 5 /* write an end-of-file record (mark) */ -#define MTREW 6 /* rewind */ -#define MTOFFL 7 /* rewind and put the drive offline (eject?) */ -#define MTNOP 8 /* no op, set status only (read with MTIOCGET) */ -#define MTRETEN 9 /* retension tape */ -#define MTBSFM 10 /* +backward space FileMark, position at FM */ -#define MTFSFM 11 /* +forward space FileMark, position at FM */ -#define MTEOM 12 /* goto end of recorded media (for appending files). - * MTEOM positions after the last FM, ready for - * appending another file. - */ -#define MTERASE 13 /* erase tape -- be careful! */ - -#define MTRAS1 14 /* run self test 1 (nondestructive) */ -#define MTRAS2 15 /* run self test 2 (destructive) */ -#define MTRAS3 16 /* reserved for self test 3 */ - -#define MTSETBLK 20 /* set block length (SCSI) */ -#define MTSETDENSITY 21 /* set tape density (SCSI) */ -#define MTSEEK 22 /* seek to block (Tandberg, etc.) */ -#define MTTELL 23 /* tell block (Tandberg, etc.) */ -#define MTSETDRVBUFFER 24 /* set the drive buffering according to SCSI-2 */ - /* ordinary buffered operation with code 1 */ -#define MTFSS 25 /* space forward over setmarks */ -#define MTBSS 26 /* space backward over setmarks */ -#define MTWSM 27 /* write setmarks */ - -#define MTLOCK 28 /* lock the drive door */ -#define MTUNLOCK 29 /* unlock the drive door */ -#define MTLOAD 30 /* execute the SCSI load command */ -#define MTUNLOAD 31 /* execute the SCSI unload command */ -#define MTCOMPRESSION 32/* control compression with SCSI mode page 15 */ -#define MTSETPART 33 /* Change the active tape partition */ -#define MTMKPART 34 /* Format the tape with one or two partitions */ - -/* structure for MTIOCGET - mag tape get status command */ - -typedef int daddr_t; - -struct mtget { - long int mt_type; /* type of magtape device */ - long int mt_resid; /* residual count: (not sure) - * number of bytes ignored, or - * number of files not skipped, or - * number of records not skipped. - */ - /* the following registers are device dependent */ - long int mt_dsreg; /* status register */ - long int mt_gstat; /* generic (device independent) status */ - long int mt_erreg; /* error register */ - /* The next two fields are not always used */ - daddr_t mt_fileno; /* number of current file on tape */ - daddr_t mt_blkno; /* current block number */ -}; - -/* - * Constants for mt_type. Not all of these are supported, - * and these are not all of the ones that are supported. - */ -#define MT_ISUNKNOWN 0x01 -#define MT_ISQIC02 0x02 /* Generic QIC-02 tape streamer */ -#define MT_ISWT5150 0x03 /* Wangtek 5150EQ, QIC-150, QIC-02 */ -#define MT_ISARCHIVE_5945L2 0x04 /* Archive 5945L-2, QIC-24, QIC-02? */ -#define MT_ISCMSJ500 0x05 /* CMS Jumbo 500 (QIC-02?) */ -#define MT_ISTDC3610 0x06 /* Tandberg 6310, QIC-24 */ -#define MT_ISARCHIVE_VP60I 0x07 /* Archive VP60i, QIC-02 */ -#define MT_ISARCHIVE_2150L 0x08 /* Archive Viper 2150L */ -#define MT_ISARCHIVE_2060L 0x09 /* Archive Viper 2060L */ -#define MT_ISARCHIVESC499 0x0A /* Archive SC-499 QIC-36 controller */ -#define MT_ISQIC02_ALL_FEATURES 0x0F /* Generic QIC-02 with all features */ -#define MT_ISWT5099EEN24 0x11 /* Wangtek 5099-een24, 60MB, QIC-24 */ -#define MT_ISTEAC_MT2ST 0x12 /* Teac MT-2ST 155mb drive, Teac DC-1 card (Wangtek type) */ -#define MT_ISEVEREX_FT40A 0x32 /* Everex FT40A (QIC-40) */ -#define MT_ISDDS1 0x51 /* DDS device without partitions */ -#define MT_ISDDS2 0x52 /* DDS device with partitions */ -#define MT_ISONSTREAM_SC 0x61 /* OnStream SCSI tape drives (SC-x0) - and SCSI emulated (DI, DP, USB) */ -#define MT_ISSCSI1 0x71 /* Generic ANSI SCSI-1 tape unit */ -#define MT_ISSCSI2 0x72 /* Generic ANSI SCSI-2 tape unit */ - -/* QIC-40/80/3010/3020 ftape supported drives. - * 20bit vendor ID + 0x800000 (see ftape-vendors.h) - */ -#define MT_ISFTAPE_UNKNOWN 0x800000 /* obsolete */ -#define MT_ISFTAPE_FLAG 0x800000 - -struct mt_tape_info { - long int t_type; /* device type id (mt_type) */ - char* t_name; /* descriptive name */ -}; - -#define MT_TAPE_INFO { \ - {MT_ISUNKNOWN, "Unknown type of tape device"}, \ - {MT_ISQIC02, "Generic QIC-02 tape streamer"}, \ - {MT_ISWT5150, "Wangtek 5150, QIC-150"}, \ - {MT_ISARCHIVE_5945L2, "Archive 5945L-2"}, \ - {MT_ISCMSJ500, "CMS Jumbo 500"}, \ - {MT_ISTDC3610, "Tandberg TDC 3610, QIC-24"}, \ - {MT_ISARCHIVE_VP60I, "Archive VP60i, QIC-02"}, \ - {MT_ISARCHIVE_2150L, "Archive Viper 2150L"}, \ - {MT_ISARCHIVE_2060L, "Archive Viper 2060L"}, \ - {MT_ISARCHIVESC499, "Archive SC-499 QIC-36 controller"}, \ - {MT_ISQIC02_ALL_FEATURES, "Generic QIC-02 tape, all features"}, \ - {MT_ISWT5099EEN24, "Wangtek 5099-een24, 60MB"}, \ - {MT_ISTEAC_MT2ST, "Teac MT-2ST 155mb data cassette drive"}, \ - {MT_ISEVEREX_FT40A, "Everex FT40A, QIC-40"}, \ - {MT_ISONSTREAM_SC, "OnStream SC-, DI-, DP-, or USB tape drive"}, \ - {MT_ISSCSI1, "Generic SCSI-1 tape"}, \ - {MT_ISSCSI2, "Generic SCSI-2 tape"}, \ - {0, NULL} \ -} - - -/* structure for MTIOCPOS - mag tape get position command */ - -struct mtpos { - long int mt_blkno; /* current block number */ -}; - - -/* structure for MTIOCGETCONFIG/MTIOCSETCONFIG primarily intended - * as an interim solution for QIC-02 until DDI is fully implemented. - */ -struct mtconfiginfo { - long int mt_type; /* drive type */ - long int ifc_type; /* interface card type */ - unsigned short int irqnr; /* IRQ number to use */ - unsigned short int dmanr; /* DMA channel to use */ - unsigned short int port; /* IO port base address */ - - unsigned long int debug; /* debugging flags */ - - unsigned int have_dens:1; - unsigned int have_bsf:1; - unsigned int have_fsr:1; - unsigned int have_bsr:1; - unsigned int have_eod:1; - unsigned int have_seek:1; - unsigned int have_tell:1; - unsigned int have_ras1:1; - unsigned int have_ras2:1; - unsigned int have_ras3:1; - unsigned int have_qfa:1; - - unsigned int pad1:5; - char reserved[10]; -}; - -/* structure for MTIOCVOLINFO, query information about the volume - * currently positioned at (zftape) - */ -struct mtvolinfo { - unsigned int mt_volno; /* vol-number */ - unsigned int mt_blksz; /* blocksize used when recording */ - unsigned int mt_rawsize; /* raw tape space consumed, in kb */ - unsigned int mt_size; /* volume size after decompression, in kb */ - unsigned int mt_cmpr:1; /* this volume has been compressed */ -}; - -/* raw access to a floppy drive, read and write an arbitrary segment. - * For ftape/zftape to support formatting etc. - */ -#define MT_FT_RD_SINGLE 0 -#define MT_FT_RD_AHEAD 1 -#define MT_FT_WR_ASYNC 0 /* start tape only when all buffers are full */ -#define MT_FT_WR_MULTI 1 /* start tape, continue until buffers are empty */ -#define MT_FT_WR_SINGLE 2 /* write a single segment and stop afterwards */ -#define MT_FT_WR_DELETE 3 /* write deleted data marks, one segment at time */ - -struct mtftseg { - unsigned int mt_segno; /* the segment to read or write */ - unsigned int mt_mode; /* modes for read/write (sync/async etc.) */ - int mt_result; /* result of r/w request, not of the ioctl */ - void *mt_data; /* User space buffer: must be 29kb */ -}; - -/* get tape capacity (ftape/zftape) - */ -struct mttapesize { - unsigned long mt_capacity; /* entire, uncompressed capacity of a cartridge */ - unsigned long mt_used; /* what has been used so far, raw uncompressed amount */ -}; - -/* possible values of the ftfmt_op field - */ -#define FTFMT_SET_PARMS 1 /* set software parms */ -#define FTFMT_GET_PARMS 2 /* get software parms */ -#define FTFMT_FORMAT_TRACK 3 /* start formatting a tape track */ -#define FTFMT_STATUS 4 /* monitor formatting a tape track */ -#define FTFMT_VERIFY 5 /* verify the given segment */ - -struct ftfmtparms { - unsigned char ft_qicstd; /* QIC-40/QIC-80/QIC-3010/QIC-3020 */ - unsigned char ft_fmtcode; /* Refer to the QIC specs */ - unsigned char ft_fhm; /* floppy head max */ - unsigned char ft_ftm; /* floppy track max */ - unsigned short ft_spt; /* segments per track */ - unsigned short ft_tpc; /* tracks per cartridge */ -}; - -struct ftfmttrack { - unsigned int ft_track; /* track to format */ - unsigned char ft_gap3; /* size of gap3, for FORMAT_TRK */ -}; - -struct ftfmtstatus { - unsigned int ft_segment; /* segment currently being formatted */ -}; - -struct ftfmtverify { - unsigned int ft_segment; /* segment to verify */ - unsigned long ft_bsm; /* bsm as result of VERIFY cmd */ -}; - -struct mtftformat { - unsigned int fmt_op; /* operation to perform */ - union fmt_arg { - struct ftfmtparms fmt_parms; /* format parameters */ - struct ftfmttrack fmt_track; /* ctrl while formatting */ - struct ftfmtstatus fmt_status; - struct ftfmtverify fmt_verify; /* for verifying */ - } fmt_arg; -}; - -/* mag tape io control commands */ -#define MTIOCTOP _IOW('m', 1, struct mtop) /* do a mag tape op */ -#define MTIOCGET _IOR('m', 2, struct mtget) /* get tape status */ -#define MTIOCPOS _IOR('m', 3, struct mtpos) /* get tape position */ - -/* The next two are used by the QIC-02 driver for runtime reconfiguration. - * See tpqic02.h for struct mtconfiginfo. - */ -#define MTIOCGETCONFIG _IOR('m', 4, struct mtconfiginfo) /* get tape config */ -#define MTIOCSETCONFIG _IOW('m', 5, struct mtconfiginfo) /* set tape config */ - -/* the next six are used by the floppy ftape drivers and its frontends - * sorry, but MTIOCTOP commands are write only. - */ -#define MTIOCRDFTSEG _IOWR('m', 6, struct mtftseg) /* read a segment */ -#define MTIOCWRFTSEG _IOWR('m', 7, struct mtftseg) /* write a segment */ -#define MTIOCVOLINFO _IOR('m', 8, struct mtvolinfo) /* info about volume */ -#define MTIOCGETSIZE _IOR('m', 9, struct mttapesize)/* get cartridge size*/ -#define MTIOCFTFORMAT _IOWR('m', 10, struct mtftformat) /* format ftape */ -#define MTIOCFTCMD _IOWR('m', 11, struct mtftcmd) /* send QIC-117 cmd */ - -/* Generic Mag Tape (device independent) status macros for examining - * mt_gstat -- HP-UX compatible. - * There is room for more generic status bits here, but I don't - * know which of them are reserved. At least three or so should - * be added to make this really useful. - */ -#define GMT_EOF(x) ((x) & 0x80000000) -#define GMT_BOT(x) ((x) & 0x40000000) -#define GMT_EOT(x) ((x) & 0x20000000) -#define GMT_SM(x) ((x) & 0x10000000) /* DDS setmark */ -#define GMT_EOD(x) ((x) & 0x08000000) /* DDS EOD */ -#define GMT_WR_PROT(x) ((x) & 0x04000000) -/* #define GMT_ ? ((x) & 0x02000000) */ -#define GMT_ONLINE(x) ((x) & 0x01000000) -#define GMT_D_6250(x) ((x) & 0x00800000) -#define GMT_D_1600(x) ((x) & 0x00400000) -#define GMT_D_800(x) ((x) & 0x00200000) -/* #define GMT_ ? ((x) & 0x00100000) */ -/* #define GMT_ ? ((x) & 0x00080000) */ -#define GMT_DR_OPEN(x) ((x) & 0x00040000) /* door open (no tape) */ -/* #define GMT_ ? ((x) & 0x00020000) */ -#define GMT_IM_REP_EN(x) ((x) & 0x00010000) /* immediate report mode */ -/* 16 generic status bits unused */ - - -/* SCSI-tape specific definitions */ -/* Bitfield shifts in the status */ -#define MT_ST_BLKSIZE_SHIFT 0 -#define MT_ST_BLKSIZE_MASK 0xffffff -#define MT_ST_DENSITY_SHIFT 24 -#define MT_ST_DENSITY_MASK 0xff000000 - -#define MT_ST_SOFTERR_SHIFT 0 -#define MT_ST_SOFTERR_MASK 0xffff - -/* Bitfields for the MTSETDRVBUFFER ioctl */ -#define MT_ST_OPTIONS 0xf0000000 -#define MT_ST_BOOLEANS 0x10000000 -#define MT_ST_SETBOOLEANS 0x30000000 -#define MT_ST_CLEARBOOLEANS 0x40000000 -#define MT_ST_WRITE_THRESHOLD 0x20000000 -#define MT_ST_DEF_BLKSIZE 0x50000000 -#define MT_ST_DEF_OPTIONS 0x60000000 -#define MT_ST_TIMEOUTS 0x70000000 -#define MT_ST_SET_TIMEOUT (MT_ST_TIMEOUTS | 0x000000) -#define MT_ST_SET_LONG_TIMEOUT (MT_ST_TIMEOUTS | 0x100000) - -#define MT_ST_BUFFER_WRITES 0x1 -#define MT_ST_ASYNC_WRITES 0x2 -#define MT_ST_READ_AHEAD 0x4 -#define MT_ST_DEBUGGING 0x8 -#define MT_ST_TWO_FM 0x10 -#define MT_ST_FAST_MTEOM 0x20 -#define MT_ST_AUTO_LOCK 0x40 -#define MT_ST_DEF_WRITES 0x80 -#define MT_ST_CAN_BSR 0x100 -#define MT_ST_NO_BLKLIMS 0x200 -#define MT_ST_CAN_PARTITIONS 0x400 -#define MT_ST_SCSI2LOGICAL 0x800 -#define MT_ST_SYSV 0x1000 - -/* The mode parameters to be controlled. Parameter chosen with bits 20-28 */ -#define MT_ST_CLEAR_DEFAULT 0xfffff -#define MT_ST_DEF_DENSITY (MT_ST_DEF_OPTIONS | 0x100000) -#define MT_ST_DEF_COMPRESSION (MT_ST_DEF_OPTIONS | 0x200000) -#define MT_ST_DEF_DRVBUFFER (MT_ST_DEF_OPTIONS | 0x300000) - -/* The offset for the arguments for the special HP changer load command. */ -#define MT_ST_HPLOADER_OFFSET 10000 - -/* Specify default tape device. */ -#ifndef DEFTAPE -#define DEFTAPE "/dev/tape/0" -#endif - -#endif |