@@ -20,7 +20,7 @@ ifeq (ia64,$(ARCH)) BOOT_IMG = all.img endif ifeq (x86_64,$(ARCH)) - BOOT_IMG = cdrom.img hd.img hdcdrom_usb.img network.img network_gigabit.img network_usb.img blank.img + BOOT_IMG = cdrom.img hd.img hdcdrom_usb.img network.img network_gigabit.img network_usb.img blank.img pcmcia.img endif FBOOT_IMG = $(BOOT_IMG:%=images/%) @@ -60,6 +60,7 @@ install_only: make -C tools/$(ARCH)/cd install ROOTDEST=$(ROOTDEST) endif cd $(ROOTDEST)/images; rm -rf alternatives + rm -f $(ROOTDEST)/images/*.img-cdcom* if [ `ls $(ROOTDEST)/images/*.img-* 2>/dev/null | wc -l` -gt 0 ]; then \ cd $(ROOTDEST)/images; mkdir alternatives; cd alternatives; mv ../*.img-* .; md5sum *.img-* > MD5SUM; \ fi diff --git a/kernel/list_modules.pm b/kernel/list_modules.pm index f64d308e2..02efadbec 100644 --- a/kernel/list_modules.pm +++ b/kernel/list_modules.pm @@ -74,7 +74,7 @@ our %l = ( if_(arch() =~ /^sparc/, qw(pluto)), if_(arch() !~ /alpha/ && arch() !~ /sparc/, qw(DAC960 dpt_i2o megaraid aacraid cciss cpqarray gdth i2o_block), - qw(cpqfc qla2200 qla2300 ataraid hptraid silraid pdcraid pdc-ultra), + qw(cpqfc qla2200 qla2300 ataraid hptraid silraid pdcraid pdc-ultra sata_promise sata_via), qw(ips ppa imm), ), ], @@ -92,7 +92,8 @@ our %l = ( usb => [ qw(usbcore usb-uhci usb-ohci ehci-hcd usbkbd keybdev input) ], firewire => [ qw(ohci1394 ieee1394) ], pcmcia => [ - if_(arch() !~ /^sparc/, qw(pcmcia_core tcic ds i82365 i82092 yenta_socket)), # cb_enabler + if_(arch() !~ /^x86_64|sparc/, qw(tcic i82365 i82092)), # doc says "older laptops" + if_(arch() !~ /^sparc/, qw(pcmcia_core ds yenta_socket)), # cb_enabler ], #serial_cs #ftl_cs 3c575_cb apa1480_cb epic_cb serial_cb tulip_cb iflash2+_mtd iflash2_mtd diff --git a/kernel/modules.pl b/kernel/modules.pl index 97231731d..c7154e4a5 100644 --- a/kernel/modules.pl +++ b/kernel/modules.pl @@ -25,24 +25,16 @@ my %modules_only_for_all_img = ( qw(3c501 3c503 3c505 3c507 3c515), # unused, hopefully? qw(eepro 82596 de620 depca ewrk3 cs89x0), - if_(arch() =~ /x86_64/, qw(orinoco_plx)), # don't support laptop for now - if_(arch() =~ /x86_64/, qw(hp100 epic100)), # old (nico) if_(arch() =~ /alpha|ppc/, qw(sb1000)), qw(iph5526), qw(ac3200 at1700 atp ni5010 ni52 ni65), #- unused from Jeff ], - 'bus/pcmcia' => [ - if_(arch() =~ /x86_64/, qw(pcmcia_core ds tcic yenta_socket)), # don't support laptop for now - if_(arch() =~ /x86_64/, qw(i82092 i82365)), # doco says "older laptops" - ], - 'disk/scsi' => [ # ISA cards: qw(NCR53c406a aha152x psi240i qlogicfas qlogicfc wd7000 sim710 t128 ultrastor), '53c7,8xx', qw(qla2x00 in2000 pas16 a100u2w seagate g_NCR5380), - if_(arch() =~ /x86_64/, qw(53c7,8xx nsp32 initio advansys atp870u)), #- old qw(AM53C974), # deprecated by tmscsim qw(u14-34f), #- duplicate from ultrastor.o #- still used, keeping them: qw(aha1542 sym53c416), @@ -53,7 +45,6 @@ my %modules_only_for_all_img = ( ], 'disk/hardware_raid' => [ - if_(arch() =~ /x86_64/, qw(ataraid)), #- old qw(i2o_block qla2200 qla2300 cpqfc DAC960 gdth pdc-ultra), ], ); diff --git a/make_boot_img b/make_boot_img index 4df3d2c45..f56baaba8 100755 --- a/make_boot_img +++ b/make_boot_img @@ -122,7 +122,7 @@ sub initrd { _ "$sudo mknod $mnt/dev/ttyp0 c 3 0"; } - if (member($type, qw(pcmcia all network)) && $arch !~ /ppc|ia64|x86_64/) { + if (member($type, qw(pcmcia all network)) && $arch !~ /ppc|ia64/) { _ "$sudo cp -a /etc/pcmcia $mnt/etc"; _ "cp $mnt/etc/pcmcia/config /tmp/pcmcia_config_tmp"; _ "tools/patch_pcmcia_config.pl /tmp/pcmcia_config_tmp kernel/all.modules/$main/modules.dep"; @@ -622,7 +622,7 @@ rescue-net: boots the rescue image from a network server sub isolinux { my ($main, @kernels) = @_; - @kernels = ($main, grep { $_ ne $main } @kernels); + @kernels = ($main, grep { $_ ne $main && $_ !~ /cdcom/ } @kernels); _ "rm -rf isolinux"; mkdir "isolinux", 0777; my $i = 0; foreach (@kernels) { @@ -637,7 +637,12 @@ sub isolinux { #- for old style pictures (9.1 and previous) # lilo-bmp2mdk mode:0x103 progress:425,173,16,7,64+21 clear:600,800,64+59 pos:0,0 <isolinux-graphic.bmp >isolinux/boot.msg #- for current 9.2 pictures. - _ "lilo-bmp2mdk mode:0x103 progress:371,144,4,8,64+60 clear:600,800,64+127 pos:0,0 <isolinux-graphic.bmp >isolinux/boot.msg"; + if ($arch eq "x86_64") { + _ "bunzip2 -c $instdir/init-data/boot-install-lilo-800-V64.msg.bz2 >isolinux/boot.msg"; + } + else { + _ "lilo-bmp2mdk mode:0x103 progress:371,144,4,8,64+60 clear:600,800,64+127 pos:0,0 <isolinux-graphic.bmp >isolinux/boot.msg"; + } } _ "cp /usr/lib/syslinux/isolinux.bin isolinux/isolinux.bin"; output "isolinux/isolinux.cfg", " diff --git a/mdk-stage1/Makefile b/mdk-stage1/Makefile index 60fcf0830..9551a3dcb 100644 --- a/mdk-stage1/Makefile +++ b/mdk-stage1/Makefile @@ -183,6 +183,9 @@ DIRS += mar pci-resource usb-resource bzlib $(INSMOD) slang newt ppp/pppd rp-ppp ifeq (i386, $(ARCH)) DIRS += pcmcia_ endif +ifeq (x86_64, $(ARCH)) +DIRS += pcmcia_ +endif ifeq (i386,$(ARCH)) @@ -190,6 +193,11 @@ PCMCIA_LIB = pcmcia_/libpcmcia.a PCMCIA_DEFS = -DENABLE_PCMCIA endif +ifeq (x86_64,$(ARCH)) +PCMCIA_LIB = pcmcia_/libpcmcia.a +PCMCIA_DEFS = -DENABLE_PCMCIA +endif + USB_DEFS_GEN = -DENABLE_USB USB_DEFS = -DENABLE_USB -DDISABLE_PCIADAPTERS diff --git a/mdk-stage1/dietlibc/include/sys/io.h b/mdk-stage1/dietlibc/include/sys/io.h index 5edf33a57..40a0d459b 100644 --- a/mdk-stage1/dietlibc/include/sys/io.h +++ b/mdk-stage1/dietlibc/include/sys/io.h @@ -8,7 +8,7 @@ extern int iopl(int level) __THROW; #ifndef __STRICT_ANSI__ /* anyone have a cleaner solution for this mess? */ -#ifdef __i386__ +#if defined(__i386__) || defined(__x86_64__) static inline unsigned char inb (unsigned short int port) { unsigned char _v; __asm__ __volatile__ ("inb %w1,%0":"=a" (_v):"Nd" (port)); diff --git a/mdk-stage1/init-data/boot-install-lilo-800-V64.msg.bz2 b/mdk-stage1/init-data/boot-install-lilo-800-V64.msg.bz2 Binary files differnew file mode 100644 index 000000000..ccc4f6d12 --- /dev/null +++ b/mdk-stage1/init-data/boot-install-lilo-800-V64.msg.bz2 diff --git a/mdk-stage1/pcmcia_/cardmgr.c b/mdk-stage1/pcmcia_/cardmgr.c index ea3ff127e..042aa9e5d 100644 --- a/mdk-stage1/pcmcia_/cardmgr.c +++ b/mdk-stage1/pcmcia_/cardmgr.c @@ -229,7 +229,7 @@ int open_sock(int sock, int mode) static int xlate_scsi_name(bind_info_t *bind) { int i, fd, mode, minor; - u_long arg[2], id1, id2; + u_int arg[2], id1, id2; id1 = strtol(bind->name+3, NULL, 16); if ((bind->major == SCSI_DISK0_MAJOR) || @@ -1259,9 +1259,9 @@ static void adjust_resources(void) if (ret != 0) { switch (al->adj.Resource) { case RES_MEMORY_RANGE: - sprintf(tmp, "memory %p-%p", - (char *)al->adj.resource.memory.Base, - (char *)al->adj.resource.memory.Base + + sprintf(tmp, "memory %#lx-%#lx", + al->adj.resource.memory.Base, + al->adj.resource.memory.Base + al->adj.resource.memory.Size - 1); break; case RES_IO_RANGE: diff --git a/mdk-stage1/pcmcia_/cirrus.h b/mdk-stage1/pcmcia_/cirrus.h index 49d7fa2de..78f73b26d 100644 --- a/mdk-stage1/pcmcia_/cirrus.h +++ b/mdk-stage1/pcmcia_/cirrus.h @@ -48,11 +48,6 @@ #define PD67_EXT_INDEX 0x2e /* Extension index */ #define PD67_EXT_DATA 0x2f /* Extension data */ -#define pd67_ext_get(s, r) \ - (i365_set(s, PD67_EXT_INDEX, r), i365_get(s, PD67_EXT_DATA)) -#define pd67_ext_set(s, r, v) \ - (i365_set(s, PD67_EXT_INDEX, r), i365_set(s, PD67_EXT_DATA, v)) - /* PD6722 extension registers -- indexed in PD67_EXT_INDEX */ #define PD67_DATA_MASK0 0x01 /* Data mask 0 */ #define PD67_DATA_MASK1 0x02 /* Data mask 1 */ @@ -125,10 +120,6 @@ #define PD67_EC1_INV_MGMT_IRQ 0x10 #define PD67_EC1_PULLUP_CTL 0x20 -/* Fields in PD67_EXTERN_DATA */ -#define PD67_EXD_VS1(s) (0x01 << ((s)<<1)) -#define PD67_EXD_VS2(s) (0x02 << ((s)<<1)) - /* Fields in PD67_MISC_CTL_3 */ #define PD67_MC3_IRQ_MASK 0x03 #define PD67_MC3_IRQ_PCPCI 0x00 @@ -163,20 +154,4 @@ /* Socket Number Register */ #define PD6832_SOCKET_NUMBER 0x004c /* 8 bit */ -/* Data structure for tracking vendor-specific state */ -typedef struct cirrus_state_t { - u_char misc1; /* PD67_MISC_CTL_1 */ - u_char misc2; /* PD67_MISC_CTL_2 */ - u_char ectl1; /* PD67_EXT_CTL_1 */ - u_char timer[6]; /* PD67_TIME_* */ -} cirrus_state_t; - -#define CIRRUS_PCIC_ID \ - IS_PD6729, IS_PD6730, IS_PD6832 - -#define CIRRUS_PCIC_INFO \ - { "Cirrus PD6729", IS_CIRRUS|IS_PCI, ID(CIRRUS, 6729) }, \ - { "Cirrus PD6730", IS_CIRRUS|IS_PCI, PCI_VENDOR_ID_CIRRUS, -1 }, \ - { "Cirrus PD6832", IS_CIRRUS|IS_CARDBUS, ID(CIRRUS, 6832) } - #endif /* _LINUX_CIRRUS_H */ diff --git a/mdk-stage1/pcmcia_/cs.h b/mdk-stage1/pcmcia_/cs.h index dea6937eb..9abeac216 100644 --- a/mdk-stage1/pcmcia_/cs.h +++ b/mdk-stage1/pcmcia_/cs.h @@ -49,8 +49,8 @@ typedef struct adjust_t { u_int Attributes; union { struct memory { - u_long Base; - u_long Size; + unsigned long Base; + unsigned long Size; } memory; struct io { ioaddr_t BasePort; @@ -267,7 +267,7 @@ typedef struct modwin_t { /* For RequestWindow */ typedef struct win_req_t { u_int Attributes; - u_long Base; + unsigned long Base; u_int Size; u_int AccessSpeed; } win_req_t; @@ -398,14 +398,6 @@ typedef struct mtd_bind_t { #ifdef __KERNEL__ /* - * Calls to set up low-level "Socket Services" drivers - */ - -typedef int (*ss_entry_t)(u_int sock, u_int cmd, void *arg); -extern int register_ss_entry(int nsock, ss_entry_t entry); -extern void unregister_ss_entry(ss_entry_t entry); - -/* * The main Card Services entry point */ @@ -436,30 +428,6 @@ extern int CardServices(int func, void *a1, void *a2, void *a3); extern int CardServices(int func, ...); #endif -#ifdef __BEOS__ -#define SS_MODULE_NAME(s) ("busses/pcmcia/" s "/v1") -#define MTD_MODULE_NAME(s) ("busses/pcmcia/" s "/v1") -#define CS_CLIENT_MODULE_NAME "bus_managers/pcmcia_cs/client/v1" -typedef struct cs_client_module_info { - bus_manager_info binfo; - int (*_CardServices)(int, ...); - int (*_MTDHelperEntry)(int, ...); - void (*_add_timer)(struct timer_list *); - void (*_del_timer)(struct timer_list *); -} cs_client_module_info; -#define CS_SOCKET_MODULE_NAME "bus_managers/pcmcia_cs/socket/v1" -typedef struct cs_socket_module_info { - bus_manager_info binfo; - int (*_register_ss_entry)(int, ss_entry_t); - void (*_unregister_ss_entry)(ss_entry_t); - void (*_add_timer)(struct timer_list *); - void (*_del_timer)(struct timer_list *); - int (*register_resource)(int, u_long, u_long); - int (*release_resource)(int, u_long, u_long); - int (*check_resource)(int, u_long, u_long); -} cs_socket_module_info; -#endif - #endif /* __KERNEL__ */ #endif /* _LINUX_CS_H */ diff --git a/mdk-stage1/pcmcia_/cs_types.h b/mdk-stage1/pcmcia_/cs_types.h index a6b56b6bf..4598d7f48 100644 --- a/mdk-stage1/pcmcia_/cs_types.h +++ b/mdk-stage1/pcmcia_/cs_types.h @@ -38,8 +38,13 @@ #endif #endif -typedef u_short socket_t; +#ifdef __arm__ +typedef u_int ioaddr_t; +#else typedef u_short ioaddr_t; +#endif + +typedef u_short socket_t; typedef u_int event_t; typedef u_char cisdata_t; typedef u_short page_t; diff --git a/mdk-stage1/pcmcia_/driver_ops.h b/mdk-stage1/pcmcia_/driver_ops.h index a7223e2c6..2f0a066d3 100644 --- a/mdk-stage1/pcmcia_/driver_ops.h +++ b/mdk-stage1/pcmcia_/driver_ops.h @@ -68,15 +68,6 @@ typedef struct driver_operations { int register_driver(struct driver_operations *ops); void unregister_driver(struct driver_operations *ops); -#ifdef __BEOS__ -#define CB_ENABLER_MODULE_NAME "bus_managers/cb_enabler/v1" -typedef struct cb_enabler_module_info { - bus_manager_info binfo; - int (*register_driver)(struct driver_operations *ops); - void (*unregister_driver)(struct driver_operations *ops); -} cb_enabler_module_info; -#endif /* __BEOS__ */ - #endif /* __KERNEL__ */ #endif /* _LINUX_DRIVER_OPS_H */ diff --git a/mdk-stage1/pcmcia_/ds.h b/mdk-stage1/pcmcia_/ds.h index d191b09d6..29db7b415 100644 --- a/mdk-stage1/pcmcia_/ds.h +++ b/mdk-stage1/pcmcia_/ds.h @@ -143,21 +143,6 @@ int unregister_pccard_driver(dev_info_t *dev_info); #define register_pcmcia_driver register_pccard_driver #define unregister_pcmcia_driver unregister_pccard_driver -#ifdef __BEOS__ -#define DS_MODULE_NAME "bus_managers/pcmcia_ds/v1" -typedef struct ds_module_info { - bus_manager_info binfo; - int (*_register_pccard_driver)(dev_info_t *, - dev_link_t *(*)(void), - void (*)(dev_link_t *)); - int (*_unregister_pccard_driver)(dev_info_t *); - struct driver_info_t **root_driver; - int *sockets; - struct socket_info_t **socket_table; - sem_id *list_sem; -} ds_module_info; -#endif /* __BEOS__ */ - #endif /* __KERNEL__ */ #endif /* _LINUX_DS_H */ diff --git a/mdk-stage1/pcmcia_/i82365.h b/mdk-stage1/pcmcia_/i82365.h index 27ee5837c..38ff167fb 100644 --- a/mdk-stage1/pcmcia_/i82365.h +++ b/mdk-stage1/pcmcia_/i82365.h @@ -97,7 +97,6 @@ #define I365_CSC_GPI 0x10 /* Flags for I365_ADDRWIN */ -#define I365_ADDR_MEMCS16 0x20 #define I365_ENA_IO(map) (0x40 << (map)) #define I365_ENA_MEM(map) (0x01 << (map)) @@ -131,24 +130,6 @@ #define I365_MEM_WRPROT 0x8000 /* In offset high byte */ #define I365_MEM_REG 0x4000 -#define I365_REG(slot, reg) (((slot) << 6) | (reg)) - -/* Default ISA interrupt mask */ -#define I365_ISA_IRQ_MASK 0xdeb8 /* irq's 3-5,7,9-12,14,15 */ - -/* Device ID's for PCI-to-PCMCIA bridges */ - -#ifndef PCI_VENDOR_ID_INTEL -#define PCI_VENDOR_ID_INTEL 0x8086 -#endif -#ifndef PCI_DEVICE_ID_INTEL_82092AA_0 -#define PCI_DEVICE_ID_INTEL_82092AA_0 0x1221 -#endif -#ifndef PCI_VENDOR_ID_OMEGA -#define PCI_VENDOR_ID_OMEGA 0x119b -#endif -#ifndef PCI_DEVICE_ID_OMEGA_82C092G -#define PCI_DEVICE_ID_OMEGA_82C092G 0x1221 -#endif +#define I365_REG(slot, reg) (((slot) << 6) + reg) #endif /* _LINUX_I82365_H */ diff --git a/mdk-stage1/pcmcia_/vg468.h b/mdk-stage1/pcmcia_/vg468.h index 93dc00b37..23890cd07 100644 --- a/mdk-stage1/pcmcia_/vg468.h +++ b/mdk-stage1/pcmcia_/vg468.h @@ -103,10 +103,4 @@ /* Flags for VG469_EXT_MODE_B */ #define VG469_MODE_B_3V 0x01 /* 3.3v for socket B */ -/* Data structure for tracking vendor-specific state */ -typedef struct vg46x_state_t { - u_char ctl; /* VG468_CTL */ - u_char ema; /* VG468_EXT_MODE_A */ -} vg46x_state_t; - #endif /* _LINUX_VG468_H */ diff --git a/mdk-stage1/pcmcia_/yacc_config.c b/mdk-stage1/pcmcia_/yacc_config.c index 79ec16eb5..2262d52f3 100644 --- a/mdk-stage1/pcmcia_/yacc_config.c +++ b/mdk-stage1/pcmcia_/yacc_config.c @@ -64,7 +64,7 @@ static int add_module(device_info_t *card, char *name); #line 65 "yacc_config.y" typedef union { char *str; - u_long num; + unsigned long num; struct device_info_t *device; struct card_info_t *card; struct mtd_ident_t *mtd; diff --git a/mdk-stage1/pcmcia_/yacc_config.h b/mdk-stage1/pcmcia_/yacc_config.h index b4902c8e6..f9b881def 100644 --- a/mdk-stage1/pcmcia_/yacc_config.h +++ b/mdk-stage1/pcmcia_/yacc_config.h @@ -28,7 +28,7 @@ #define NUMBER 284 typedef union { char *str; - u_long num; + unsigned long num; struct device_info_t *device; struct card_info_t *card; struct mtd_ident_t *mtd; diff --git a/mdk-stage1/rescue-gui.c b/mdk-stage1/rescue-gui.c index dbe12cb4a..b24018f2c 100644 --- a/mdk-stage1/rescue-gui.c +++ b/mdk-stage1/rescue-gui.c @@ -32,6 +32,10 @@ #include "frontend.h" #include "tools.h" +#if defined(__i386__) || defined(__x86_64__) +#define ENABLE_RESCUE_MS_BOOT 1 +#endif + char * env[] = { "PATH=/usr/bin:/bin:/sbin:/usr/sbin:/mnt/sbin:/mnt/usr/sbin:/mnt/bin:/mnt/usr/bin", "LD_LIBRARY_PATH=/lib:/usr/lib:/mnt/lib:/mnt/usr/lib:/usr/X11R6/lib:/mnt/usr/X11R6/lib" @@ -155,7 +159,7 @@ int main(int argc __attribute__ ((unused)), char **argv __attribute__ ((unused)) enum return_type results; char install_bootloader[] = "Re-install Boot Loader"; -#ifdef __i386__ +#if ENABLE_RESCUE_MS_BOOT char restore_ms_boot[] = "Restore Windows Boot Loader"; #endif char mount_parts[] = "Mount your partitions under /mnt"; @@ -164,7 +168,7 @@ int main(int argc __attribute__ ((unused)), char **argv __attribute__ ((unused)) char doc[] = "Doc: what's addressed by this Rescue?"; char * actions[] = { install_bootloader, -#ifdef __i386__ +#if ENABLE_RESCUE_MS_BOOT restore_ms_boot, #endif mount_parts, go_to_console, reboot_, doc, NULL }; @@ -182,7 +186,7 @@ int main(int argc __attribute__ ((unused)), char **argv __attribute__ ((unused)) if (ptr_begins_static_str(choice, install_bootloader)) { binary = "/usr/bin/install_bootloader"; } -#ifdef __i386__ +#if ENABLE_RESCUE_MS_BOOT if (ptr_begins_static_str(choice, restore_ms_boot)) { binary = "/usr/bin/restore_ms_boot"; } diff --git a/perl-install/Makefile b/perl-install/Makefile index d8b9d4d65..1d9e64e30 100644 --- a/perl-install/Makefile +++ b/perl-install/Makefile @@ -12,6 +12,14 @@ OTHERS = $(OTHERDIRS) $(OTHERFILES) OTHERDIRS = tools/ddcprobe tools/serial_probe OTHERFILES = tools/rpcinfo-flushed.c +USE_PCMCIA := n +ifeq ($(ARCH),i386) +USE_PCMCIA := y +endif +ifeq ($(ARCH),x86_64) +USE_PCMCIA := y +endif + .PHONY: all $(DIRS) install clean stage2 full_stage2 all: list_modules.pm TAGS $(DIRS) @@ -180,6 +188,7 @@ endif clean-rpmsrate $(ROOTDEST)/Mandrake/base/rpmsrate $(ROOTDEST)/Mandrake/RPMS* for i in ../kernel/modules.description ../kernel/all.modules/modules.cz*; do cp -f $$i $(DEST)/lib/; done + rm -f $(DEST)/lib/modules.cz-cdcom.* $(MAKE) -C share/po install NAME=libDrakX LOCALEDIR=$(DEST)/usr/share/locale_special @@ -190,7 +199,7 @@ endif # echo -e '#!/bin/sh\n\nexec "/usr/bin/sh"' > $(DEST)/usr/bin/runinstall2 # chmod a+x $(DEST)/usr/bin/runinstall2 -ifeq (i386,$(ARCH)) +ifeq (y,$(USE_PCMCIA)) cp -a /etc/pcmcia $(DEST)/etc ../tools/patch_pcmcia_config.pl $(DEST)/etc/pcmcia/config ../kernel/all.modules/`cat ../kernel/all.kernels/.main`/modules.dep endif diff --git a/perl-install/Xconfig/card.pm b/perl-install/Xconfig/card.pm index 3a5f9cd9b..652460a20 100644 --- a/perl-install/Xconfig/card.pm +++ b/perl-install/Xconfig/card.pm @@ -9,6 +9,7 @@ use common; use log; +my $lib = (arch() =~ /x86_64/) ? "lib64" : "lib"; my $force_xf4 = arch() =~ /ppc|ia64|x86_64/; @@ -117,7 +118,7 @@ sub to_raw_X { # This loads the NVIDIA GLX extension module. # IT IS IMPORTANT TO KEEP NAME AS FULL PATH TO libglx.so ELSE # IT WILL LOAD XFree86 glx module and the server will crash. - $raw_X->{xfree4}->set_load_module('/usr/X11R6/lib/modules/extensions/libglx.so', $card->{DRI_GLX_SPECIAL}); + $raw_X->{xfree4}->set_load_module("/usr/X11R6/$lib/modules/extensions/libglx.so", $card->{DRI_GLX_SPECIAL}); $raw_X->{xfree4}->remove_Section('DRI'); $raw_X->{xfree4}->add_Section('DRI', { Mode => { val => '0666' } }) if $card->{use_DRI_GLX}; @@ -352,15 +353,15 @@ sub install_server { #- make sure everything is correct at this point, packages have really been installed #- and driver and GLX extension is present. if ($card->{Driver2} eq 'nvidia' && - -e "$::prefix/usr/X11R6/lib/modules/drivers/nvidia_drv.o" && - -e "$::prefix/usr/X11R6/lib/modules/extensions/libglx.so") { + -e "$::prefix/usr/X11R6/$lib/modules/drivers/nvidia_drv.o" && + -e "$::prefix/usr/X11R6/$lib/modules/extensions/libglx.so") { log::l("Using specific NVIDIA driver and GLX extensions"); $card->{Driver} = 'nvidia'; $card->{DRI_GLX_SPECIAL} = 1; } if ($card->{Driver2} eq 'fglrx' && - -e "$::prefix/usr/X11R6/lib/modules/dri/fglrx_dri.so" && - -e "$::prefix/usr/X11R6/lib/modules/drivers/fglrx_drv.o") { + -e "$::prefix/usr/X11R6/$lib/modules/dri/fglrx_dri.so" && + -e "$::prefix/usr/X11R6/$lib/modules/drivers/fglrx_drv.o") { log::l("Using specific ATI fglrx and DRI drivers"); $card->{Driver} = 'fglrx'; } diff --git a/perl-install/Xconfig/monitor.pm b/perl-install/Xconfig/monitor.pm index 27475c0d1..eb6a7fc7e 100644 --- a/perl-install/Xconfig/monitor.pm +++ b/perl-install/Xconfig/monitor.pm @@ -156,8 +156,47 @@ sub configure_automatic { return $monitor->{HorizSync} && $monitor->{VertRefresh}; } +# Parse XFree86 log in case with got not valuable information from +# ddcxinfos. NOTE: this is only safe at install stage. +sub getinfoFromXFree() { + my $xf86log = "/var/log/XFree86.0.log"; + $::isInstall && -r $xf86log or return; + + my ($VideoRAM, $HorizSync, $VertRefresh, $VendorName, $EISA_ID, $size); + for (cat_($xf86log)) { + if (/(VideoRAM|Total Mem): (\d+) kB/) { + $VideoRAM = $2; + } + elsif (/hsync range of ([.\d]+-[.\d]+) kHz/) { + $HorizSync = $1; + } + elsif (/vrefresh range of ([.\d]+-[.\d]+) Hz/) { + $VertRefresh = $1; + } + elsif (/(Display dimensions|Image Size):\s+\(?(\d+)[,x\s]+(\d+)\)? mm/) { + my ($x, $y) = (($2+9)/10, ($3+9)/10); # round up + $size = sqrt($x*$x + $y*$y) / 2.54 * 1.08; + } + elsif (/Monitor name: (.+)/) { + $VendorName = $1; + } + elsif (/Manufacturer: (\w+)\s+Model: (\w+)/) { + $EISA_ID = "$1$2"; + } + } + + { + VideoRam_probed => $VideoRAM, + HorizSync => $HorizSync, + VertRefresh => $VertRefresh, + size => $size, + if_($EISA_ID, EISA_ID => lc($EISA_ID)), + VendorName => $VendorName || "Plug'n Play", + } +} + sub getinfoFromDDC() { - my ($VideoRam, @l) = any::ddcxinfos() or return; + my ($VideoRam, @l) = any::ddcxinfos() or return getinfoFromXFree(); my @Modes; local $_; @@ -168,6 +207,9 @@ sub getinfoFromDDC() { push @Modes, [ $x, $y, $depth ]; } + # last chance to get some useful information + return getinfoFromXFree() if ! @l; + my ($h, $v, $size, @_modes) = @l; { VideoRam_probed => to_int($VideoRam), diff --git a/perl-install/any.pm b/perl-install/any.pm index 525ced9f5..4c47a8c72 100644 --- a/perl-install/any.pm +++ b/perl-install/any.pm @@ -667,7 +667,7 @@ sub selectLanguage { if ($::isInstall) { my $langs = $langs_ || {}; - my $using_images = $in->isa('interactive::gtk') && listlength(cat_('/proc/fb')); + my $using_images = $in->isa('interactive::gtk') && !$in->{vga16}; #- to create the default value, use the first location for that value :/ $lang = first(lang::l2location($lang))."|$lang"; diff --git a/perl-install/bootloader.pm b/perl-install/bootloader.pm index d790bf480..c9f4dc903 100644 --- a/perl-install/bootloader.pm +++ b/perl-install/bootloader.pm @@ -371,7 +371,7 @@ sub set_append { my ($simple, $dict) = @_; if ($has_val) { @$dict = grep { $_->[0] ne $key || $key eq 'mem' && append__mem_is_memsize($_->[1]) != append__mem_is_memsize($val) } @$dict; - push @$dict, [ $key, $val ] if $val; + push @$dict, [ $key, $val ] if $val ne ''; } else { @$simple = grep { $_ ne $key } @$simple; push @$simple, $key; diff --git a/perl-install/c/smp.c b/perl-install/c/smp.c index 2438418bb..886321e06 100644 --- a/perl-install/c/smp.c +++ b/perl-install/c/smp.c @@ -152,6 +152,11 @@ typedef unsigned int vm_offset_t; #include <machine/types.h> #endif +typedef unsigned char u8; +typedef unsigned short u16; +typedef unsigned int u32; +typedef vm_offset_t addr_t; + /* EBDA is @ 40:0e in real-mode terms */ #define EBDA_POINTER 0x040e /* location of EBDA pointer */ @@ -172,43 +177,43 @@ typedef unsigned int vm_offset_t; /* MP Floating Pointer Structure */ typedef struct MPFPS { char signature[ 4 ]; - void* pap; - u_char length; - u_char spec_rev; - u_char checksum; - u_char mpfb1; - u_char mpfb2; - u_char mpfb3; - u_char mpfb4; - u_char mpfb5; + addr_t pap; + u8 length; + u8 spec_rev; + u8 checksum; + u8 mpfb1; + u8 mpfb2; + u8 mpfb3; + u8 mpfb4; + u8 mpfb5; } mpfps_t; /* MP Configuration Table Header */ typedef struct MPCTH { char signature[ 4 ]; - u_short base_table_length; - u_char spec_rev; - u_char checksum; - u_char oem_id[ 8 ]; - u_char product_id[ 12 ]; - void* oem_table_pointer; - u_short oem_table_size; - u_short entry_count; - void* apic_address; - u_short extended_table_length; - u_char extended_table_checksum; - u_char reserved; + u16 base_table_length; + u8 spec_rev; + u8 checksum; + u8 oem_id[ 8 ]; + u8 product_id[ 12 ]; + addr_t oem_table_pointer; + u16 oem_table_size; + u16 entry_count; + addr_t apic_address; + u16 extended_table_length; + u8 extended_table_checksum; + u8 reserved; } mpcth_t; typedef struct PROCENTRY { - u_char type; - u_char apicID; - u_char apicVersion; - u_char cpuFlags; - u_long cpuSignature; - u_long featureFlags; - u_long reserved1; - u_long reserved2; + u8 type; + u8 apicID; + u8 apicVersion; + u8 cpuFlags; + u32 cpuSignature; + u32 featureFlags; + u32 reserved1; + u32 reserved2; } ProcEntry; #define PROCENTRY_FLAG_EN 0x01 @@ -274,7 +279,7 @@ static int intelDetectSMP_mptable(void) mpcth_t cth; int count, i; - paddr = (vm_offset_t) mpfps.pap; + paddr = mpfps.pap; seekEntry( paddr ); readEntry( &cth, sizeof( cth ) ); /* if we don't have any entries, the kernel sure diff --git a/perl-install/crypto.pm b/perl-install/crypto.pm index 8fa979678..30cc02c5a 100644 --- a/perl-install/crypto.pm +++ b/perl-install/crypto.pm @@ -126,6 +126,13 @@ sub getPackages { $crypto::host = $mirror; + #- get pubkey file first as we cannot handle 2 files opened simultaneously. + my $pubkey; + eval { + my $fpubkey = getFile("base/pubkey", $mirror); + $pubkey = [ $packages->parse_armored_file($fpubkey) ]; + }; + #- check first if there is something to get... my $fhdlist = getFile("base/hdlist.cz", $mirror); unless ($fhdlist) { @@ -136,7 +143,7 @@ sub getPackages { #- extract hdlist of crypto, then depslist. require pkgs; my $update_medium = pkgs::psUsingHdlist($prefix, 'ftp', $packages, "hdlist-updates.cz", "1u", "RPMS", - "Updates for Mandrake Linux " . version(), 1, $fhdlist); + "Updates for Mandrake Linux " . version(), 1, $fhdlist, $pubkey); if ($update_medium) { log::l("read updates hdlist"); #- keep in mind where is the URL prefix used according to mirror (for install_any::install_urpmi). diff --git a/perl-install/drakxtools.spec b/perl-install/drakxtools.spec index 51ade7ab2..f391fdabc 100644 --- a/perl-install/drakxtools.spec +++ b/perl-install/drakxtools.spec @@ -1,7 +1,7 @@ Summary: The drakxtools (XFdrake, diskdrake, keyboarddrake, mousedrake...) Name: drakxtools Version: 9.2 -Release: 16mdk +Release: 18mdk Url: http://www.mandrakelinux.com/en/drakx.php3 Source0: %name-%version.tar.bz2 License: GPL @@ -315,6 +315,42 @@ file /etc/sysconfig/harddrake2/previous_hw | fgrep -q perl && %_datadir/harddrak %config(noreplace) %_sysconfdir/logrotate.d/drakxtools-http %changelog +* Mon Oct 27 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-18mdk +- drakconnect: + o do not blacklist anymore bcm4400 for network hotplugging + o support ISDN usb adapters +- drakperm: + o force user|group|other rights order in edit dialog + o one was able to alter system rules in memory wheareas this is not + supported since they're enforced by msec. + disable "ok" button for system rules to prevent confusion. +- haddrake service: workaround anthill bug #18 (do not overwrite sound + aliases when no hardware change occured) +- misc amd64 fixes (gwenole) +- net_monitor: + o fix connection status detection + o fix profile managment switch + +* Thu Oct 16 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-17mdk +- drakbackup: all users overrides individual selection in wizard + (#5916) (stew) +- drakconnect: + o fix #425, #1881: wireless adapters settings were lost when + altering network configuration when not from wizard mode + o when steping back in wizard, do not overwrite first card + parameters with last one's (#3276) + o fix expert mode (lost checkboxes states when "expert mode" option + is checked) + o blacklist bcm4400 for network hotplugging +- drakfont: + o fix ttf conversion (#5088) + o log more explanations +- draksec: fix unsaved security administrator setting (#6103) +- misc chinese fixes (arnaud, pablo) +- printerdrake: fix lpd call (pablo) +- translations updates (pablo) +- misc amd64 fixes (gwenole) + * Fri Sep 19 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-16mdk - drakconnect: fix #5825 (hostname set as ARRAY(0x...)) diff --git a/perl-install/install_gtk.pm b/perl-install/install_gtk.pm index b1cf13aeb..e8d2f7ac5 100644 --- a/perl-install/install_gtk.pm +++ b/perl-install/install_gtk.pm @@ -197,10 +197,12 @@ sub create_logo_window { } #------------------------------------------------------------------------------ -sub init_gtk() { +sub init_gtk { + my ($o) = @_; + symlink("/tmp/stage2/etc/$_", "/etc/$_") foreach qw(gtk-2.0 pango fonts); - if (!listlength(cat_('/proc/fb'))) { + if ($o->{vga16}) { #- inactivate antialias in VGA16 because it makes fonts look worse output('/tmp/fonts.conf', q(<fontconfig> @@ -241,7 +243,7 @@ if ($Driver) { output($file, sprintf(<<'END', $mouse_type, $Driver)); Section "Files" - FontPath "/usr/X11R6/lib/X11/fonts:unscaled" + FontPath "/usr/X11R6/lib/X11/fonts:unscaled" EndSection Section "InputDevice" @@ -261,8 +263,9 @@ EndSection Section "Monitor" Identifier "monitor" - HorizSync 31.5-35.5 - VertRefresh 50-70 +#- Let XFree86 autodetect those values +# HorizSync 31.5-35.5 +# VertRefresh 50-70 EndSection Section "Device" diff --git a/perl-install/install_steps.pm b/perl-install/install_steps.pm index 58a33b68d..47da4be32 100644 --- a/perl-install/install_steps.pm +++ b/perl-install/install_steps.pm @@ -805,7 +805,10 @@ sub setupBootloaderBefore { require bootloader; if (my @l = (grep { $_->{bus} eq 'ide' } detect_devices::burners(), detect_devices::raw_zips())) { - bootloader::set_append($o->{bootloader}, $_->{device}, 'ide-scsi') foreach @l; + foreach (@l) { + bootloader::set_append($o->{bootloader}, $_->{device}, 'ide-scsi'); + bootloader::set_append($o->{bootloader}, $_->{device}.'lun', 0); + } } if ($o->{miscellaneous}{HDPARM}) { bootloader::set_append($o->{bootloader}, $_, 'autotune') foreach grep { /ide/ } all("/proc/ide"); @@ -825,6 +828,9 @@ sub setupBootloaderBefore { if (cat_("/proc/cmdline") =~ /\bnoapic/) { bootloader::set_append($o->{bootloader}, 'noapic'); } + if (cat_("/proc/cmdline") =~ /\b(idle)=(\S+)/) { + bootloader::set_append($o->{bootloader}, $1, $2); + } my ($MemTotal) = cat_("/proc/meminfo") =~ /^MemTotal:\s*(\d+)/m; if (my ($biggest_swap) = sort { $b->{size} <=> $a->{size} } grep { isSwap($_) } @{$o->{fstab}}) { log::l("MemTotal: $MemTotal < ", $biggest_swap->{size} / 2); diff --git a/perl-install/install_steps_gtk.pm b/perl-install/install_steps_gtk.pm index 07b654c16..49b794b93 100644 --- a/perl-install/install_steps_gtk.pm +++ b/perl-install/install_steps_gtk.pm @@ -46,26 +46,29 @@ sub new($$) { install_gtk::createXconf($f, @{$o->{mouse}}{"XMOUSETYPE", "device"}, $o->{mouse}{wacom}[0], $Driver); mkdir '/var/log' if !-d '/var/log'; - local $SIG{CHLD} = sub { $ok = 0 if waitpid(-1, c::WNOHANG()) > 0 }; my @options = ( if_(arch() !~ /^sparc/ && arch() ne 'ppc' && $server ne 'Xnest', '-kb', '-allowMouseOpenFail', '-xf86config', $f), - ($wanted_DISPLAY, 'tty7', '-dpms', '-s', '240'), + ($wanted_DISPLAY, 'tty7', '-dpms', '-s', '240', '-dpi', '75'), ); push @options, $xpmac_opts !~ /ofonly/ ? ('-mode', '17', '-depth', '32') : '-mach64' if $server =~ /Xpmac/; push @options, '-fp', '/usr/X11R6/lib/X11/fonts:unscaled' if $server =~ /Xsun|Xpmac/; push @options, '-ac', '-geometry', $o->{vga16} ? '640x480' : '800x600' if $server eq 'Xnest'; - unless (fork()) { - exec $server, @options or exit 1; + if (!fork()) { + c::setsid(); + exec $server, @options or c::_exit(1); } + my $nb; foreach (1..60) { sleep 1; - log::l("Server died"), return 0 if !$ok; - if (c::Xtest($wanted_DISPLAY)) { + log::l("Server died"), return 0 if !fuzzy_pidofs(qr/\b$server\b/); + $nb++ if c::Xtest($wanted_DISPLAY); + if ($nb > 2) { #- one succeeded test is not enough :-( $ugtk2::force_focus = 1; + log::l("AFAIK X server is up"); return 1; } } @@ -121,7 +124,7 @@ sub new($$) { } OK: $ENV{DISPLAY} = $wanted_DISPLAY; - install_gtk::init_gtk(); + install_gtk::init_gtk($o); install_gtk::init_sizes(); install_gtk::install_theme($o); install_gtk::create_logo_window($o); diff --git a/perl-install/interactive/gtk.pm b/perl-install/interactive/gtk.pm index e348271f1..b588094f0 100644 --- a/perl-install/interactive/gtk.pm +++ b/perl-install/interactive/gtk.pm @@ -597,13 +597,15 @@ sub ask_fromW { ($advanced) = @_; $advanced ? $advanced_pack->show : $advanced_pack->hide; }; + my $first_time = 1; my $set_advanced = sub { ($advanced) = @_; $set_default_size->() if $advanced; - $update->($common->{callbacks}{advanced}) if $advanced; + $update->($common->{callbacks}{advanced}) if $advanced & !$first_time; $set_advanced_raw->($advanced); @widgets = (@widgets_always, if_($advanced, @widgets_advanced)); $mainw->sync; #- for $set_all below (mainly for the set of clist) + $first_time = 0 if $first_time; $set_all->(); #- must be done when showing advanced lists (to center selected value) }; my $advanced_button = [ $common->{advanced_label}, @@ -653,7 +655,7 @@ sub ask_fromW { my $message = $common->{interactive_help}->() or return; $o->ask_warn(N("Help"), $message); }, 1 ]); - if ($::isStandalone && $::expert) { + if ($::expert && @$l2) { $common->{advanced_state} = 1; $advanced_button->[0] = $common->{advanced_label_close}; } diff --git a/perl-install/lang.pm b/perl-install/lang.pm index a05706914..5068cbe83 100644 --- a/perl-install/lang.pm +++ b/perl-install/lang.pm @@ -628,7 +628,7 @@ sub get_kde_lang { #- get it using #- echo C $(rpm -qp --qf "%{name}\n" /RPMS/kde-i18n-* | sed 's/kde-i18n-//') - my @valid_kde_langs = qw(C af ar az bg bs ca cs da de el en_GB eo es et eu fa fi fr he hr hu is it ja ko lt lv mk mt nb nl nn pl pt pt_BR ro ru se sk sl sr sv ta th tr uk vi xh zh_CN.GB2312 zh_TW.Big5 zu); + my @valid_kde_langs = qw(C af ar az bg bs ca cs da de el en_GB eo es et eu fa fi fr he hr hu is it ja ko lt lv mk mt nb nl nn pl pt pt_BR ro ru se sk sl sr sv ta th tr uk vi xh zh_CN zh_TW zu); my %valid_kde_langs; @valid_kde_langs{@valid_kde_langs} = (); my $valid_lang = sub { @@ -637,7 +637,7 @@ sub get_kde_lang { my %fixlangs = (en => 'C', en_US => 'C', 'sr@Latn' => 'sr', st => 'nso', ve => 'ven', - zh_CN => 'zh_CN.GB2312', zh_SG => 'zh_CN.GB2312', zh_TW => 'zh_TW.Big5', zh_HK => 'zh_TW.Big5'); + zh_CN => 'zh_CN', zh_SG => 'zh_CN', zh_TW => 'zh_TW', zh_HK => 'zh_TW'); exists $fixlangs{$lang} ? $fixlangs{$lang} : exists $valid_kde_langs{$lang} ? $lang : exists $valid_kde_langs{substr($lang, 0, 2)} ? substr($lang, 0, 2) : ''; diff --git a/perl-install/network/ethernet.pm b/perl-install/network/ethernet.pm index 7eb54397e..8c3bb5b56 100644 --- a/perl-install/network/ethernet.pm +++ b/perl-install/network/ethernet.pm @@ -159,13 +159,14 @@ sub configureNetwork { configureNetwork_step_1: $netc ||= {}; - my $last; foreach (@all_cards) { + my ($last, %last); + foreach (@all_cards) { my $intf2 = findIntf($intf ||= {}, $_->[0]); - add2hash($intf2, $last); + add2hash($intf2, $last{$_->[0]}); add2hash($intf2, { NETMASK => '255.255.255.0' }); configureNetworkIntf($netc, $in, $intf2, $netc->{NET_DEVICE}, 0, $_->[1]) or return; - $last = $intf2; + $last = $last{$_->[0]} = $intf2; } $last or return; diff --git a/perl-install/network/isdn.pm b/perl-install/network/isdn.pm index 4605963cc..5d966d8a6 100644 --- a/perl-install/network/isdn.pm +++ b/perl-install/network/isdn.pm @@ -187,11 +187,13 @@ sub isdn_ask { isdn_ask_step_1: my $e = $in->ask_from_list_(N("ISDN Configuration"), $label . "\n" . N("What kind of card do you have?"), - [ N_("ISA / PCMCIA"), N_("PCI"), N_("I don't know") ] + [ N_("ISA / PCMCIA"), N_("PCI"), N_("USB"), N_("I don't know") ] ) or return; isdn_ask_step_1b: if ($e =~ /PCI/) { $isdn->{card_type} = 'pci'; + } elsif ($e =~ /USB/) { + $isdn->{card_type} = 'usb'; } else { $in->ask_from_list_(N("ISDN Configuration"), N(" @@ -206,7 +208,7 @@ If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your card. $e = $in->ask_from_listf(N("ISDN Configuration"), N("Which of the following is your ISDN card?"), sub { $_[0]{description} }, - [ grep { $_->{card} eq $isdn->{card_type} } @isdndata ]) or goto isdn_ask_step_1b; + [ grep { $_->{card} eq $isdn->{card_type} } @isdndata ]) or goto ($isdn->{card_type} =~ /usb|pci/ ? 'isdn_ask_step_1' : 'isdn_ask_step_1b'); $e->{$_} and $isdn->{$_} = $e->{$_} foreach qw(driver type mem io io0 io1 irq firmware); isdn_ask_step_3: @@ -247,7 +249,7 @@ sub isdn_detect_backend { if (my ($c) = modules::probe_category('network/isdn')) { $isdn->{$_} = $c->{$_} foreach qw(description vendor id driver options firmware); $isdn->{$_} = sprintf("%0x", $isdn->{$_}) foreach 'vendor', 'id'; - $isdn->{card_type} = 'pci'; + $isdn->{card_type} = $c->{bus} eq 'USB' ? 'usb' : 'pci'; ($isdn->{type}) = $isdn->{options} =~ /type=(\d+)/; # $c->{options} !~ /id=HiSax/ && $isdn->{driver} eq "hisax" and $c->{options} .= " id=HiSax"; if ($c->{options} !~ /protocol=/ && $isdn->{protocol} =~ /\d/) { diff --git a/perl-install/network/isdn_consts.pm b/perl-install/network/isdn_consts.pm index b6ce7e1e1..04ddf6e96 100644 --- a/perl-install/network/isdn_consts.pm +++ b/perl-install/network/isdn_consts.pm @@ -324,6 +324,16 @@ our @isdndata = type => '36', card => 'pci', }, + { description => "BeWAN R834 (USB)", + driver => 'hisax_st5481', + type => '99', + card => 'usb', + }, + { description => "Gazel 128 (USB)", + driver => 'hisax_st5481', + type => '99', + card => 'usb', + }, ); 1; diff --git a/perl-install/network/network.pm b/perl-install/network/network.pm index 958690635..8b14a2fae 100644 --- a/perl-install/network/network.pm +++ b/perl-install/network/network.pm @@ -10,6 +10,7 @@ use Socket; use common; use detect_devices; use run_program; +use network::tools; use any; use vars qw(@ISA @EXPORT); use log; @@ -152,7 +153,7 @@ sub write_resolv_conf { } sub write_interface_conf { - my ($file, $intf, $_netc, $prefix) = @_; + my ($file, $intf, $netc, $prefix) = @_; if ($intf->{HWADDR} && -e "$prefix/sbin/ip") { $intf->{HWADDR} = undef; @@ -173,7 +174,12 @@ sub write_interface_conf { $intf->{BOOTPROTO} =~ s/dhcp.*/dhcp/; - setVarsInSh($file, $intf, qw(DEVICE BOOTPROTO IPADDR NETMASK NETWORK BROADCAST ONBOOT HWADDR MII_NOT_SUPPORTED), if_($intf->{wireless_eth}, qw(WIRELESS_MODE WIRELESS_ESSID WIRELESS_NWID WIRELESS_FREQ WIRELESS_SENS WIRELESS_RATE WIRELESS_ENC_KEY WIRELESS_RTS WIRELESS_FRAG WIRELESS_IWCONFIG WIRELESS_IWSPY WIRELESS_IWPRIV)), if_($intf->{BOOTPROTO} eq "dhcp", qw(DHCP_HOSTNAME NEEDHOSTNAME))); + require network::ethernet; + my %cards = map { $_->[0] => $_->[1] } network::ethernet::conf_network_card_backend($netc, $intf); + setVarsInSh($file, $intf, qw(DEVICE BOOTPROTO IPADDR NETMASK NETWORK BROADCAST ONBOOT HWADDR MII_NOT_SUPPORTED), + if_(is_wireless_intf($cards{$intf->{DEVICE}}), qw(WIRELESS_MODE WIRELESS_ESSID WIRELESS_NWID WIRELESS_FREQ WIRELESS_SENS WIRELESS_RATE WIRELESS_ENC_KEY WIRELESS_RTS WIRELESS_FRAG WIRELESS_IWCONFIG WIRELESS_IWSPY WIRELESS_IWPRIV)), + if_($intf->{BOOTPROTO} eq "dhcp", qw(DHCP_HOSTNAME NEEDHOSTNAME)) + ); log::explanations("written $intf->{DEVICE} interface configuration in $file"); } @@ -307,18 +313,12 @@ sub gateway { my @masked = masked_ip($ip) =~ $ip_regexp; $masked[3] = 1; join(".", @masked); - } sub configureNetworkIntf { my ($netc, $in, $intf, $net_device, $skip, $module) = @_; my $text; - my @wireless_modules = qw(aironet_cs aironet4500_cs hermes airo orinoco_cs orinoco airo_cs netwave_cs ray_cs wavelan_cs wvlan_cs airport); - my $flag = 0; - foreach (@wireless_modules) { - $module =~ /$_/ and $flag = 1; - } - if ($flag) { + if (is_wireless_intf($module)) { $intf->{wireless_eth} = 1; $netc->{wireless_eth} = 1; $intf->{WIRELESS_MODE} = "Managed"; @@ -338,7 +338,10 @@ notation (for example, 1.2.3.4)."); my $auto_ip = $intf->{BOOTPROTO} !~ /static/; my $onboot = $intf->{ONBOOT} ? $intf->{ONBOOT} =~ /yes/ : bool2yesno(!member($intf->{DEVICE}, map { $_->{device} } detect_devices::pcmcia_probe())); my $needhostname = $intf->{NEEDHOSTNAME} !~ /no/; - my $hotplug = $::isStandalone && !$intf->{MII_NOT_SUPPORTED} || 1; + # blacklist: + #$intf->{MII_NOT_SUPPORTED} ||= bool2yesno(member($module, qw(bcm4400))); # 3c59x de4x5 e100 e1000 ne2k-pci + my $hotplug = text2bool($intf->{MII_NOT_SUPPORTED}); + invbool(\$hotplug); my $track_network_id = $::isStandalone && $intf->{HWADDR} || detect_devices::isLaptop(); delete $intf->{NETWORK}; delete $intf->{BROADCAST}; @@ -479,7 +482,7 @@ sub read_all_conf { add2hash($netc, read_resolv_conf()); add2hash($netc, read_tmdns_conf("$prefix/etc/tmdns.conf")) if -r "$prefix/etc/tmdns.conf"; foreach (all("$prefix/etc/sysconfig/network-scripts")) { - if (/ifcfg-(\w+)/ && $1 ne 'lo') { + if (/^ifcfg-(\w+)/ && $1 ne 'lo') { my $intf = findIntf($intf, $1); add2hash($intf, { getVarsFromSh("$prefix/etc/sysconfig/network-scripts/$_") }); } diff --git a/perl-install/network/tools.pm b/perl-install/network/tools.pm index 62b9a0fb5..59bd397ca 100644 --- a/perl-install/network/tools.pm +++ b/perl-install/network/tools.pm @@ -9,7 +9,7 @@ use MDK::Common::Globals "network", qw($in $prefix $disconnect_file $connect_pro use MDK::Common::System qw(getVarsFromSh); @ISA = qw(Exporter); -@EXPORT = qw(write_cnx_script write_secret_backend read_secret_backend passwd_by_login write_initscript ask_connect_now connect_backend disconnect_backend read_providers_backend ask_info2 type2interface connected connected_bg test_connected connected2 disconnected); +@EXPORT = qw(ask_connect_now ask_info2 connect_backend connected connected2 connected_bg disconnect_backend disconnected is_wireless_intf passwd_by_login read_providers_backend read_secret_backend test_connected type2interface write_cnx_script write_initscript write_secret_backend); @EXPORT_OK = qw($in); sub write_cnx_script { @@ -29,8 +29,10 @@ sub write_cnx_script { sub write_secret_backend { my ($a, $b) = @_; - foreach my $i ("pap-secrets", "chap-secrets") { - substInFile { s/^'$a'.*\n//; $_ .= "\n'$a' * '$b' * \n" if eof } "$prefix/etc/ppp/$i"; + foreach my $i ("$prefix/etc/ppp/pap-secrets", "$prefix/etc/ppp/chap-secrets") { + substInFile { s/^'$a'.*\n//; $_ .= "\n'$a' * '$b' * \n" if eof } $i; + #- restore access right to secrets file, just in case. + chmod 0600, $i; } } @@ -345,4 +347,9 @@ sub use_floppy { } +sub is_wireless_intf { + my ($module) = @_; + member($module, qw(airo aironet_cs aironet4500_cs airo_cs airport hermes orinoco_cs netwave_cs orinoco ray_cs wavelan_cs wvlan_cs)) +} + 1; diff --git a/perl-install/partition_table.pm b/perl-install/partition_table.pm index a4120d0bb..2d4645845 100644 --- a/perl-install/partition_table.pm +++ b/perl-install/partition_table.pm @@ -19,7 +19,7 @@ use log; @important_types = ('Linux native', 'Linux swap', if_(arch() =~ /i.86/, 'Journalised FS: ext3', 'Journalised FS: ReiserFS', 'Journalised FS: JFS', 'Journalised FS: XFS', 'DOS FAT16', 'FAT32'), if_(arch() =~ /ia64/, 'Journalised FS: ext3', 'Journalised FS: ReiserFS', 'Journalised FS: XFS', 'FAT32'), - if_(arch() =~ /x86_64/, 'Journalised FS: ext3', 'Journalised FS: ReiserFS', 'FAT32'), + if_(arch() =~ /x86_64/, 'Journalised FS: ext3', 'Journalised FS: ReiserFS', 'Journalised FS: XFS', 'FAT32'), if_(arch() =~ /ppc/, 'Journalised FS: ext3', 'Journalised FS: ReiserFS', 'Journalised FS: JFS', 'Journalised FS: XFS', 'Apple HFS Partition', 'Apple Bootstrap')); @important_types2 = ('Linux RAID', 'Linux Logical Volume Manager partition'); @@ -50,6 +50,7 @@ if_(arch() =~ /^ppc/, 0x483 => 'Journalised FS: ext3', ), if_(arch() =~ /^x86_64/, 0x183 => 'Journalised FS: ReiserFS', + 0x283 => 'Journalised FS: XFS', 0x483 => 'Journalised FS: ext3', ), if_(arch() =~ /^sparc/, 0x1 => 'SunOS boot', diff --git a/perl-install/pkgs.pm b/perl-install/pkgs.pm index 8037c9fa2..077c1f5a4 100644 --- a/perl-install/pkgs.pm +++ b/perl-install/pkgs.pm @@ -225,7 +225,10 @@ sub packageCallbackChoices { } else { my @l = grep { #- or if a kernel has to be chosen, chose the basic one. - $_->arch ne 'src' && $_->name =~ /kernel-\d/ and return $_; + if ($_->arch ne 'src') { + $_->name =~ /kernel-\d/ and return $_; + $_->name =~ /kernel-i686/ and return $_; + } #- or even if a package requires a specific locales which #- is already selected. @@ -362,7 +365,7 @@ sub psUsingHdlists { chomp; s/\s*#.*$//; /^\s*$/ and next; - m/^\s*(noauto:)?(hdlist\S*\.cz2?)\s+(\S+)\s*(.*)$/ or die "invalid hdlist description \"$_\" in hdlists file"; + m/^\s*(noauto:)?(hdlist\S*\.cz2?)\s+(\S+)\s*(.*)$/ or die qq(invalid hdlist description "$_" in hdlists file); #- make sure the first medium is always selected! #- by default select all image. @@ -378,7 +381,7 @@ sub psUsingHdlists { } sub psUsingHdlist { - my ($prefix, $method, $packages, $hdlist, $medium, $rpmsdir, $descr, $selected, $o_fhdlist) = @_; + my ($prefix, $method, $packages, $hdlist, $medium, $rpmsdir, $descr, $selected, $o_fhdlist, $o_pubkey) = @_; my $fakemedium = "$descr ($method$medium)"; my $urpmidir = -w "$prefix/var/lib/urpmi" ? "$prefix/var/lib/urpmi" : "/tmp"; log::l("trying to read $hdlist for medium $medium"); @@ -416,8 +419,13 @@ sub psUsingHdlist { #- get all keys corresponding in the right pubkey file, #- they will be added in rpmdb later if not found. - my $pubkey = install_any::getFile("Mandrake/base/pubkey" . ($hdlist =~ /hdlist(\S*)\.cz2?/ && $1)); - $m->{pubkey} = [ $packages->parse_armored_file($pubkey) ]; + if (!$o_fhdlist || $o_pubkey) { + $m->{pubkey} = $o_pubkey; + unless ($m->{pubkey}) { + my $pubkey = install_any::getFile("Mandrake/base/pubkey" . ($hdlist =~ /hdlist(\S*)\.cz2?/ && $1)); + $m->{pubkey} = [ $packages->parse_armored_file($pubkey) ]; + } + } #- integrate medium in media list, only here to avoid download error (update) to be propagated. $packages->{mediums}{$medium} = $m; @@ -530,10 +538,16 @@ sub read_rpmsrate { sub readCompssUsers { my ($meta_class) = @_; - my (%compssUsers, @sorted, $l); my $file = 'Mandrake/base/compssUsers'; my $f = $meta_class && install_any::getFile("$file.$meta_class") || install_any::getFile($file) or die "can't find $file"; + readCompssUsers_raw($f); +} + +sub readCompssUsers_raw { + my ($f) = @_; + my (%compssUsers, @sorted, $l); + local $_; while (<$f>) { /^\s*$/ || /^#/ and next; @@ -1077,7 +1091,7 @@ sub install($$$;$$) { difference2([ $$, hashtree2list(getppid(), \%ppids) ], [ hashtree2list($$, \%ppids) ]) ]); - if (@killpid) { + if (@killpid && $::isInstall) { foreach (@killpid) { my ($prog, @para) = split("\0", cat_("/proc/$_/cmdline")); log::l("ERROR: DrakX should not have to clean the packages shit. Killing $_: " . join(' ', $prog, @para) . ".") if $prog ne '/usr/lib/gconfd-2'; diff --git a/perl-install/printer/main.pm b/perl-install/printer/main.pm index 87b5b0c6f..0a3750b95 100644 --- a/perl-install/printer/main.pm +++ b/perl-install/printer/main.pm @@ -357,7 +357,7 @@ sub make_menuentry { } elsif ($connect =~ m!^file:(.+)$!) { $connection = N(", printing to %s", $1); } elsif ($connect =~ m!^lpd://([^/]+)/([^/]+)/?$!) { - $connection = N(" on LPD server \"%s\", printer \"%s\"", $2, $1); + $connection = N(" on LPD server \"%s\", printer \"%s\"", $1, $2); } elsif ($connect =~ m!^socket://([^/:]+):([^/:]+)/?$!) { $connection = N(", TCP/IP host \"%s\", port %s", $1, $2); } elsif ($connect =~ m!^smb://([^/\@]+)/([^/\@]+)/?$! || @@ -408,7 +408,7 @@ sub connectionstr { } elsif ($connect =~ m!^file:(.+)$!) { $connection = N("Prints into %s", $1); } elsif ($connect =~ m!^lpd://([^/]+)/([^/]+)/?$!) { - $connection = N("LPD server \"%s\", printer \"%s\"", $2, $1); + $connection = N("LPD server \"%s\", printer \"%s\"", $1, $2); } elsif ($connect =~ m!^socket://([^/:]+):([^/:]+)/?$!) { $connection = N("TCP/IP host \"%s\", port %s", $1, $2); } elsif ($connect =~ m!^smb://([^/\@]+)/([^/\@]+)/?$! || diff --git a/perl-install/security/msec.pm b/perl-install/security/msec.pm index 706daf5b7..3a705b89e 100644 --- a/perl-install/security/msec.pm +++ b/perl-install/security/msec.pm @@ -19,7 +19,7 @@ sub load_defaults { my ($opt, $val) = split /$separator/; chop $val; if_($opt ne 'set_security_conf', $opt => $val); - } cat_($msec->{$category}{defaults_file}); + } cat_($msec->{$category}{defaults_file}), if_($category eq "checks", 'MAIL_USER'); } @@ -76,9 +76,14 @@ sub get_check_value { # list_(functions|checks) - # return a list of functions|checks handled by level.local|security.conf +sub raw_checks_list { + my ($msec) = @_; + keys %{$msec->{checks}{default}}; +} + sub list_checks { my ($msec) = @_; - grep { !member($_, qw(MAIL_WARN MAIL_USER)) } keys %{$msec->{checks}{default}}; + grep { !member($_, qw(MAIL_WARN MAIL_USER)) } $msec->raw_checks_list; } sub list_functions { @@ -141,7 +146,7 @@ sub apply_functions { sub apply_checks { my ($msec) = @_; - my @list = sort $msec->list_checks; + my @list = sort $msec->raw_checks_list; substInFile { foreach my $check (@list) { s/^$check.*\n// } if (eof) { diff --git a/perl-install/share/list b/perl-install/share/list index 50c081ced..cbb59467e 100644 --- a/perl-install/share/list +++ b/perl-install/share/list @@ -59,6 +59,7 @@ /usr/LIB/gtk-2.0/*/loaders/libpixbufloader-png.so /etc/gtk-2.0/gtk.immodules /usr/LIB/gtk-2.0/*/engines/libgalaxy.so +/usr/LIB/gtk-2.0/*/immodules/im-cedilla.so /etc/pango/pango.modules /usr/LIB/pango/*/modules/pango-basic-xft.so /usr/LIB/pango/*/modules/pango-arabic-xft.so diff --git a/perl-install/share/list.x86_64 b/perl-install/share/list.x86_64 index 6c82c440f..6c311c501 100644 --- a/perl-install/share/list.x86_64 +++ b/perl-install/share/list.x86_64 @@ -123,3 +123,9 @@ /usr/X11R6/lib64/modules/linux/libdrm.a /usr/X11R6/lib64/modules/linux/libfbdevhw.a /usr/X11R6/lib64/modules/linux/libint10.a +/usr/X11R6/lib/X11/locale/lib64/common/ximcp.so.2 +/usr/X11R6/lib/X11/locale/lib64/common/xlcDef.so.2 +/usr/X11R6/lib/X11/locale/lib64/common/xlcUTF8Load.so.2 +/usr/X11R6/lib/X11/locale/lib64/common/xlibi18n.so.2 +/usr/X11R6/lib/X11/locale/lib64/common/xlocale.so.2 +/usr/X11R6/lib/X11/locale/lib64/common/xomGeneric.so.2 diff --git a/perl-install/share/po/zh_TW.po b/perl-install/share/po/zh_TW.po deleted file mode 100644 index faafd2dca..000000000 --- a/perl-install/share/po/zh_TW.po +++ /dev/null @@ -1,20056 +0,0 @@ -# drakbootdisk messages in Traditional Chinese -# Copyright (C) 2000 Free Software Foundation, Inc. -# Platin <platin@cle.linux.org.tw> , 2000 -# Danny Zeng <danny@zeng.com.cn>, 2000. -# Joe Man <trmetal@yahoo.com.hk>, 2001 -# Kenduest Lee <kenduest@i18n.linux.org.tw> , 2002 -# -msgid "" -msgstr "" -"Project-Id-Version: DrakX\n" -"POT-Creation-Date: 2003-09-16 13:45+0200\n" -"PO-Revision-Date: 2002-09-24 06:00+CST\n" -"Last-Translator: Kenduest Lee <kenduest@i18n.linux.org.tw>\n" -"Language-Team: Chinese <zh@li.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=big5\n" -"Content-Transfer-Encoding: 8bit\n" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Scanning partitions to find mount points" -msgstr "byΰϩݪJI" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, check additions/removals of suid root files." -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, " -"0/1 for Local Config...\n" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Configuration changed - restart clusternfs/dhcpd?" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\t\tErase=%s" -msgstr "\t\tR=%s" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Differential backups only save files that have changed or are new since the " -"original 'base' backup." -msgstr "" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "network printer port" -msgstr "AL \"%s\"As %s" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Please insert floppy disk:" -msgstr "дJ@iϤ" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "DrakTermServ" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "PCMCIA" -msgstr "PCMCIA" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"The backup partition table has not the same size\n" -"Still continue?" -msgstr "" -"ƥwФΪ@˪jp\n" -"٭n~ ?" - -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Which username" -msgstr "ӨϥΪ̱b" - -#: ../../any.pm:1 -#, c-format -msgid "Which type of entry do you want to add?" -msgstr "znsW@ ?" - -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Restore partition table" -msgstr "^swФΪ" - -#: ../../standalone/drakconnect:1 -#, fuzzy, c-format -msgid "Configure hostname..." -msgstr "]wƹ" - -#: ../../printer/cups.pm:1 -#, c-format -msgid "On CUPS server \"%s\"" -msgstr " CUPS A \"%s\"" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Post-install configuration" -msgstr "w˫᪺i@B]w" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "" -"The current security level is %s\n" -"Select permissions to see/edit" -msgstr "" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Use ``%s'' instead" -msgstr "Ρu%svN" - -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 -#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1 -#, c-format -msgid "Type" -msgstr "榡" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"Also printers configured with the PPD files provided by their manufacturers " -"or with native CUPS drivers cannot be transferred." -msgstr "" -"\n" -"LӤwgzLtөҴѪ PPD ɮפe]wnFCΪ̬O\n" -"ͩʪ CUPS Xʵ{LkQiഫʧ@C" - -#: ../../lang.pm:1 -#, c-format -msgid "Sri Lanka" -msgstr "Sri Lanka" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "" -"The following printer\n" -"\n" -"%s%s\n" -"are directly connected to your system" -msgstr "" -"\n" -"ثe@xLw˦bzWC" - -#: ../../lang.pm:1 -#, c-format -msgid "Central African Republic" -msgstr "Central African Republic" - -#: ../../network/network.pm:1 -#, c-format -msgid "Gateway device" -msgstr "hD˸m" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Advanced preferences" -msgstr "iﶵ" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Net Method:" -msgstr "覡G" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Ethernetcard" -msgstr "Etnernet d" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "If set, send the mail report to this email address else send it to root" -msgstr "" - -#: ../../modules/interactive.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Parameters" -msgstr "Ѽ" - -#: ../../standalone/draksec:1 -#, fuzzy, c-format -msgid "no" -msgstr "T" - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "Auto-detect" -msgstr "۰ʰ" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Interface:" -msgstr "G" - -#: ../../steps.pm:1 -#, c-format -msgid "Select installation class" -msgstr "ܦw˼Ҧ" - -#: ../../network/tools.pm:1 -#, c-format -msgid "" -"The system doesn't seem to be connected to the Internet.\n" -"Try to reconfigure your connection." -msgstr "" -"tΥثeݰ_ӦGèSsW InternetC\n" -"Эs]wzsu]wC" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Connect your printer to a Linux server and let your Windows machine(s) " -"connect to it as a client.\n" -"\n" -"Do you really want to continue setting up this printer as you are doing now?" -msgstr "" -"NzLw˦b Linux DWAMz Windows su LinuxDӨ" -"ΥC\n" -"\n" -"zTwn~iUhܡH" - -#: ../../lang.pm:1 -#, c-format -msgid "Belarus" -msgstr "Belarus" - -#: ../../partition_table.pm:1 -#, c-format -msgid "Error writing to file %s" -msgstr "gJɮ %s ɵoͿ~" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Report check result to syslog" -msgstr "" - -#: ../../services.pm:1 -#, c-format -msgid "" -"apmd is used for monitoring battery status and logging it via syslog.\n" -"It can also be used for shutting down the machine when the battery is low." -msgstr "" -"ѺʷqAAHΩIs syslog AC~A\n" -"qqɡA]i۰ʩIs{iʧ@C" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use tape to backup" -msgstr "ϥκϱaiƥ" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "The following packages are going to be installed" -msgstr "UCMN|QwˤW" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "CUPS configuration" -msgstr "CUPS պA" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Total progress" -msgstr "i" - -#: ../../lang.pm:1 -#, c-format -msgid "Hong Kong" -msgstr "" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Not enough free space to allocate new partitions" -msgstr "SŶiHإ߷sΰϤF" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Moving" -msgstr "b" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"Drakbackup activities via %s:\n" -"\n" -msgstr "" -"\n" -"Drakbackup ϥ %s 覡iBzG\n" -"\n" - -#: ../../standalone/draksec:1 -#, c-format -msgid "yes" -msgstr "O" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "(" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "" -"Welcome to The Network Configuration Wizard.\n" -"\n" -"We are about to configure your internet/network connection.\n" -"If you don't want to use the auto detection, deselect the checkbox.\n" -msgstr "" -"wӨ]wF\n" -"\n" -"ثedzƨӳ]wzsuC\n" -"\n" -"pGznʳ]wܡAШUءC\n" - -#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 -#, c-format -msgid ")" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Lebanon" -msgstr "Lebanon" - -#: ../../mouse.pm:1 -#, c-format -msgid "MM HitTablet" -msgstr "MM HitTablet" - -#: ../../services.pm:1 -#, c-format -msgid "Stop" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Edit selected host" -msgstr " %s " - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "No CD device defined!" -msgstr "| CD ˸mwqI" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "\tUse .backupignore files\n" -msgstr "ƥɮױҥγ̤jeqtC" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Bulgarian (phonetic)" -msgstr "O[Q (phonetic)" - -#: ../../standalone/drakpxe:1 -#, c-format -msgid "The DHCP start ip" -msgstr "DHCP _ld" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "256 kB" -msgstr "256 kB" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Don't rewind tape after backup" -msgstr "ϥκϱaiƥ" - -#: ../../any.pm:1 -#, c-format -msgid "Bootloader main options" -msgstr "}{Dnﶵ" - -#: ../../standalone.pm:1 -#, c-format -msgid "" -"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" -"usbtable] [--dynamic=dev]" -msgstr "" - -#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Tape" -msgstr "ϱa" - -#: ../../lang.pm:1 -#, c-format -msgid "Malaysia" -msgstr "Malaysia" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Scanning network..." -msgstr "y..." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"With this option you will be able to restore any version\n" -" of your /etc directory." -msgstr "ϥθӿﶵAzN٭ /etc ؿɮץؿ" - -#: ../../standalone/drakedm:1 -#, fuzzy, c-format -msgid "The change is done, do you want to restart the dm service ?" -msgstr "o %s MݭnwˤWAznw˸ӮMܡH" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Swiss (French layout)" -msgstr "h (kꦡtm)" - -# calendar/gui/goto-dialog.glade.h:2 -#: ../../standalone/drakbackup:1 -#, c-format -msgid "August" -msgstr "8" - -#: ../../raid.pm:1 -#, c-format -msgid "mkraid failed (maybe raidtools are missing?)" -msgstr "Is mkraid (]\O raidtools Sw˩ҾɭP)" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Webcam" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "size of the (second level) cpu cache" -msgstr "" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Soundcard" -msgstr "ĥd" - -# ui/evolution-calendar.xml.h:15 -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Month" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Search for files to restore" -msgstr "пnΨӦ^sƪ˸mӷ" - -#: ../../lang.pm:1 -#, c-format -msgid "Luxembourg" -msgstr "˳" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"To print a file from the command line (terminal window) use the command \"%s " -"<file>\".\n" -msgstr "" -"nbݾROCҦCLɮתܡAziHoӫO:\n" -"\"%s <ɮ>\"C\n" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Level %s\n" -msgstr "RAID h %s\n" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Syriac (phonetic)" -msgstr "Ȭ (phonetic)" - -#: ../../lang.pm:1 -#, fuzzy, c-format -msgid "Iran" -msgstr "Iraq" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Bus" -msgstr "y" - -#: ../../lang.pm:1 -#, c-format -msgid "Iraq" -msgstr "Iraq" - -#: ../../standalone/drakbug:1 -#, fuzzy, c-format -msgid "connecting to %s ..." -msgstr "suεoGF ..." - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Potential LAN address conflict found in current config of %s!\n" -msgstr "Potential LAN }Pثeb %s 쪺]wĬ!\n" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Configuring..." -msgstr "]w..." - -#: ../../standalone/drakgw:1 -#, c-format -msgid "The setup has already been done, and it's currently enabled." -msgstr "oӳ]wewgFAثeOBz}ҥiΪA" - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "" -"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" -"detect the rights parameters.\n" -"If your card is misdetected, you can force the right tuner and card types " -"here. Just select your tv card parameters if needed." -msgstr "" -"ثe kernel ֤ߴѪ bttv Xʵ{TBzثej TV dC\n" -"YOAo{tεLkTXӪܡAziHboJwTƭȡC" - -#: ../../any.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Password (again)" -msgstr "KXT{" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Search installed fonts" -msgstr "Mww˦r" - -#: ../../standalone/drakboot:1 -#, fuzzy, c-format -msgid "Default desktop" -msgstr "w]}" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "" -"To submit a bug report, click on the button report.\n" -"This will open a web browser window on %s\n" -" where you'll find a form to fill in. The information displayed above will " -"be \n" -"transferred to that server." -msgstr "" -"n^ΰDAI^sC\n" -"tαN|}sósu %s\n" -" MЧAبÿJDTAHKNΰDeܥDqoiH" -"C" - -#: ../../lang.pm:1 -#, c-format -msgid "Venezuela" -msgstr "Venezuela" - -#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 -#: ../../standalone/drakconnect:1 -#, c-format -msgid "IP address" -msgstr "IP }" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Choose the sizes" -msgstr "jp" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"List of data corrupted:\n" -"\n" -msgstr "" -"lɮײM:\n" -"\n" - -#: ../../fs.pm:1 -#, c-format -msgid "" -"Can only be mounted explicitly (i.e.,\n" -"the -a option will not cause the file system to be mounted)." -msgstr "" - -#: ../../network/modem.pm:1 -#, c-format -msgid "" -"Your modem isn't supported by the system.\n" -"Take a look at http://www.linmodems.org" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Choose another partition" -msgstr "ܥt@Ӥΰ" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Current user" -msgstr "ϥΥثeɮץؿ֦" - -#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Username" -msgstr "ϥΪ̱b" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Left \"Windows\" key" -msgstr " \"Windows\" " - -#: ../../lang.pm:1 -#, c-format -msgid "Guyana" -msgstr "Guyana" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "dhcpd Server Configuration" -msgstr "dhcpd AȥD]w" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "" -"Used for directory:\n" -" only owner of directory or file in this directory can delete it" -msgstr "" -"ϥΩؿG\n" -" ӥؿɮץؿAuɮץؿ֦̤~iHR" - -#: ../../printer/main.pm:1 -#, c-format -msgid " on Novell server \"%s\", printer \"%s\"" -msgstr " Novell D \"%s\"AL \"%s\"" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Printer Name" -msgstr "CLCW" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Remove a module" -msgstr "Ҳ" - -#: ../../any.pm:1 ../../install_steps_interactive.pm:1 -#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1 -#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Password" -msgstr "KX" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Advanced Configuration" -msgstr "i]wҦ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Scanning on your HP multi-function device" -msgstr "Ah\˸m" - -#: ../../any.pm:1 -#, c-format -msgid "Root" -msgstr "/ ΰ" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Choose an existing RAID to add to" -msgstr "n[JϺа}C" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Turkish (modern \"Q\" model)" -msgstr "gը ({N \"Q\" )" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Lilo message not found" -msgstr "lilo Tɮ" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Automatic regeneration of kernel header in /boot for\n" -"/usr/include/linux/{autoconf,version}.h" -msgstr "" -"۰ʲ kernel header TAoɮרϥ:\n" -"/usr/include/linux/{autoconf,version}.h" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "if needed" -msgstr "ݭn" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore Failed..." -msgstr "^s..." - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "/Autodetect _jazz drives" -msgstr "۰ʰ" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Store the password for this system in drakbackup configuration." -msgstr "" - -#: ../../install_messages.pm:1 -#, c-format -msgid "" -"Introduction\n" -"\n" -"The operating system and the different components available in the Mandrake " -"Linux distribution \n" -"shall be called the \"Software Products\" hereafter. The Software Products " -"include, but are not \n" -"restricted to, the set of programs, methods, rules and documentation related " -"to the operating \n" -"system and the different components of the Mandrake Linux distribution.\n" -"\n" -"\n" -"1. License Agreement\n" -"\n" -"Please read this document carefully. This document is a license agreement " -"between you and \n" -"MandrakeSoft S.A. which applies to the Software Products.\n" -"By installing, duplicating or using the Software Products in any manner, you " -"explicitly \n" -"accept and fully agree to conform to the terms and conditions of this " -"License. \n" -"If you disagree with any portion of the License, you are not allowed to " -"install, duplicate or use \n" -"the Software Products. \n" -"Any attempt to install, duplicate or use the Software Products in a manner " -"which does not comply \n" -"with the terms and conditions of this License is void and will terminate " -"your rights under this \n" -"License. Upon termination of the License, you must immediately destroy all " -"copies of the \n" -"Software Products.\n" -"\n" -"\n" -"2. Limited Warranty\n" -"\n" -"The Software Products and attached documentation are provided \"as is\", " -"with no warranty, to the \n" -"extent permitted by law.\n" -"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " -"law, be liable for any special,\n" -"incidental, direct or indirect damages whatsoever (including without " -"limitation damages for loss of \n" -"business, interruption of business, financial loss, legal fees and penalties " -"resulting from a court \n" -"judgment, or any other consequential loss) arising out of the use or " -"inability to use the Software \n" -"Products, even if MandrakeSoft S.A. has been advised of the possibility or " -"occurence of such \n" -"damages.\n" -"\n" -"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " -"COUNTRIES\n" -"\n" -"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " -"in no circumstances, be \n" -"liable for any special, incidental, direct or indirect damages whatsoever " -"(including without \n" -"limitation damages for loss of business, interruption of business, financial " -"loss, legal fees \n" -"and penalties resulting from a court judgment, or any other consequential " -"loss) arising out \n" -"of the possession and use of software components or arising out of " -"downloading software components \n" -"from one of Mandrake Linux sites which are prohibited or restricted in some " -"countries by local laws.\n" -"This limited liability applies to, but is not restricted to, the strong " -"cryptography components \n" -"included in the Software Products.\n" -"\n" -"\n" -"3. The GPL License and Related Licenses\n" -"\n" -"The Software Products consist of components created by different persons or " -"entities. Most \n" -"of these components are governed under the terms and conditions of the GNU " -"General Public \n" -"Licence, hereafter called \"GPL\", or of similar licenses. Most of these " -"licenses allow you to use, \n" -"duplicate, adapt or redistribute the components which they cover. Please " -"read carefully the terms \n" -"and conditions of the license agreement for each component before using any " -"component. Any question \n" -"on a component license should be addressed to the component author and not " -"to MandrakeSoft.\n" -"The programs developed by MandrakeSoft S.A. are governed by the GPL License. " -"Documentation written \n" -"by MandrakeSoft S.A. is governed by a specific license. Please refer to the " -"documentation for \n" -"further details.\n" -"\n" -"\n" -"4. Intellectual Property Rights\n" -"\n" -"All rights to the components of the Software Products belong to their " -"respective authors and are \n" -"protected by intellectual property and copyright laws applicable to software " -"programs.\n" -"MandrakeSoft S.A. reserves its rights to modify or adapt the Software " -"Products, as a whole or in \n" -"parts, by all means and for all purposes.\n" -"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " -"MandrakeSoft S.A. \n" -"\n" -"\n" -"5. Governing Laws \n" -"\n" -"If any portion of this agreement is held void, illegal or inapplicable by a " -"court judgment, this \n" -"portion is excluded from this contract. You remain bound by the other " -"applicable sections of the \n" -"agreement.\n" -"The terms and conditions of this License are governed by the Laws of " -"France.\n" -"All disputes on the terms of this license will preferably be settled out of " -"court. As a last \n" -"resort, the dispute will be referred to the appropriate Courts of Law of " -"Paris - France.\n" -"For any question on this document, please contact MandrakeSoft S.A. \n" -msgstr "" - -#: ../../standalone/drakboot:1 -#, fuzzy, c-format -msgid "Default user" -msgstr "w]L" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "" -"the progress bar x coordinate\n" -"of its upper left corner" -msgstr " WiBar x b " - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Current interface configuration" -msgstr "ܥثeպA]w" - -#: ../../printer/data.pm:1 -#, c-format -msgid "LPD - Line Printer Daemon" -msgstr "LPD - Line Printer Daemon" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "" -"\n" -"If you have an ISA card, the values on the next screen should be right.\n" -"\n" -"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " -"card.\n" -msgstr "" -"\n" -"pGtΦw˪OuISA dvAU@ӿùܪƭ\n" -"OTC\n" -"\n" -"pGtΦw˪O uPCMCIAdvAzӭnDoid\n" -"uIO svP uIRQvC\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Do not print any test page" -msgstr "nCLխ" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Gurmukhi" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "%s already in use\n" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Force No APIC" -msgstr " No APIC" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "This password is too short (it must be at least %d characters long)" -msgstr "oӱKX²F (@wܤ֭n %d Ӧr~)" - -#: ../../standalone.pm:1 -#, c-format -msgid "[keyboard]" -msgstr "L" - -#: ../../network/network.pm:1 -#, c-format -msgid "FTP proxy" -msgstr "FTP NzA" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Install List" -msgstr "w˲M" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Change\n" -"Restore Path" -msgstr "" -"ܧ\n" -"^s|" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Show only for the selected day" -msgstr "ܩҿ" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\tLimit disk usage to %s MB\n" -msgstr "" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "512 kB" -msgstr "512 kB" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Logs" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "(Note: Parallel ports cannot be auto-detected)" -msgstr "" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "<control>N" -msgstr "<control>N" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "What kind of card do you have?" -msgstr "zdݩاΦ?" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "<control>O" -msgstr "<control>O" - -#: ../../install_steps_interactive.pm:1 ../../steps.pm:1 -#, c-format -msgid "Security" -msgstr "wʳ]w" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"You can also use the graphical interface \"xpdq\" for setting options and " -"handling printing jobs.\n" -"If you are using KDE as desktop environment you have a \"panic button\", an " -"icon on the desktop, labeled with \"STOP Printer!\", which stops all print " -"jobs immediately when you click it. This is for example useful for paper " -"jams.\n" -msgstr "" -"z]iHϥιϧΤz{ - \"xpdq\" ӳ]wѼƳ]wA\n" -"]tnCLu@ءC\n" -"pGzثeOϥ KDE ୱҪܡAbୱu@CWA\n" -"zӥiH@өRW \"L!\" ءCz\n" -"IӶثAثebCLu@|ߧYȰC\n" - -#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 -#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 -#: ../../standalone/printerdrake:1 -#, c-format -msgid "<control>Q" -msgstr "<control>Q" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Unable to find backups to restore...\n" -msgstr "пn^s...\n" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Unknown" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "This server is already in the list, it cannot be added again.\n" -msgstr "" - -#: ../../network/netconnect.pm:1 ../../network/tools.pm:1 -#, c-format -msgid "Network Configuration" -msgstr "]w" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "<control>S" -msgstr "<control>S" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "" -"Protocol for the rest of the world\n" -"No D-Channel (leased lines)" -msgstr "" -"LqTw \n" -"L D-Channel (leased lines)" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - /etc/xinetd.d/tftp:\n" -" \tdrakTermServ will configure this file to work in conjunction with " -"the images created\n" -" \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " -"the boot image to \n" -" \teach diskless client.\n" -"\n" -" \tA typical tftp configuration file looks like:\n" -" \t\t\n" -" \tservice tftp\n" -"\t\t\t{\n" -" disable = no\n" -" socket_type = dgram\n" -" protocol = udp\n" -" wait = yes\n" -" user = root\n" -" server = /usr/sbin/in.tftpd\n" -" server_args = -s /var/lib/tftpboot\n" -" \t}\n" -" \t\t\n" -" \tThe changes here from the default installation are changing the " -"disable flag to\n" -" \t'no' and changing the directory path to /var/lib/tftpboot, where " -"mkinitrd-net\n" -" \tputs its images." -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Option %s must be a number!" -msgstr "%s Ѽƻݭn" - -#: ../../standalone/drakboot:1 ../../standalone/draksplash:1 -#, c-format -msgid "Notice" -msgstr "`N" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "You have not configured X. Are you sure you really want this?" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"The configuration of the printer will work fully automatically. If your " -"printer was not correctly detected or if you prefer a customized printer " -"configuration, turn on \"Manual configuration\"." -msgstr "" -"UCXO۰ʰҧ쪺LCLպA]w\n" -"۰ʧӤݭnt~]wCYOUCXҧ쪺L\n" -"äOzҹwAΪ̬OAƱʤ覡]wAпܡyʳ]wzC" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "What type of partitioning?" -msgstr "Hؤ覡ΡH" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"file list sent by FTP: %s\n" -" " -msgstr "" -"zL FTP ǰeɮײM: %s\n" -" " - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Interface" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Multisession CD" -msgstr "hC饭x" - -#: ../../modules/parameters.pm:1 -#, c-format -msgid "comma separated strings" -msgstr "Φrjr" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "These are the machines from which the scanners should be used:" -msgstr "" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Messages" -msgstr "Messages (T)" - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "Unknown|CPH06X (bt878) [many vendors]" -msgstr "|CPH06X (bt878)" - -#: ../../network/drakfirewall.pm:1 -#, c-format T٫тqȡ)3 ` !2{ߓK0x\;bqfڴ r#@IWkEa9#2 p*H! /4*@r h" K,Yei%lĺs}4Y}$-dJDz=NbxJ_ fnej'ŝ?hJn>r0]ol ImZJq`B73_ ;52Xbٝ w'g٣s` ]Qȇr(QVqL-?4h]. %Ŏ;\%wcDxV9C
lՆlGlKs;K Aqْdij."DgS;Lpz.k>c, uOa|-x ذc?{k6<:1 "gw
rMuB *; `>24S|-uJge,]ʆKŌ|ƶ Z /V&?W n>-I%-6[EKlEP|֒2ײ(+OΠklj/+d'3
CR>~Cp/ |~Gw<| 'x0\GfI I}WrZ(}hI6ʅQ'W̅ނ ޜNoxgfR1 jy۞1a]
ͫԵ-%f?ҷC{X J"g)wύ";.SlD7hPdIU!\Lup\JJiEJ>1h9ҷپV d9s_'HrHcZ &-fr!7/ |qׯZI;rfFWN27c*W_^v+Gҗ#B*eB KU̕qΠKҤ_a8-(c gexQ@BD137p?tX P\Gktw?yO=c?E7"hsv\dPP'bOVj, 2#DTeq) E3EeCTHB
"5 :?Ui ;']iGDr<;[VٌN|P@[W aGQdSpe{(= V.$HF"h>-? G% ['ɪX} j)QC`Rk9y*G(-pVpDIimkh
tB7kP t2O}wh) 1ថX )۬@w;Ƭbh> v*`K~EY_bis(K
5 4wwh2b_CG.U:|as~/P>ҋ0}ofATMsпQGF[f y2rhNzbF&bN.$0F-ŕi"PGݴL^{;~>[ƞS|=z3>pQ{| hI -#: ../../standalone/draksplash:1 -#, c-format -msgid "the color of the progress bar" -msgstr " iBarm " - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Suppress Fonts Files" -msgstr "Rr" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Add to RAID" -msgstr "[JϺа}C" - -#: ../../help.pm:1 -#, c-format -msgid "" -"You can add additional entries in yaboot for other operating systems,\n" -"alternate kernels, or for an emergency boot image.\n" -"\n" -"For other OSs, the entry consists only of a label and the \"root\"\n" -"partition.\n" -"\n" -"For Linux, there are a few possible options:\n" -"\n" -" * Label: this is the name you will have to type at the yaboot prompt to\n" -"select this boot option.\n" -"\n" -" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n" -"variation of vmlinux with an extension.\n" -"\n" -" * Root: the \"root\" device or ``/'' for your Linux installation.\n" -"\n" -" * Append: on Apple hardware, the kernel append option is often used to\n" -"assist in initializing video hardware, or to enable keyboard mouse button\n" -"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n" -"The following are some examples:\n" -"\n" -" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" -"hda=autotune\n" -"\n" -" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" -"\n" -" * Initrd: this option can be used either to load initial modules before\n" -"the boot device is available, or to load a ramdisk image for an emergency\n" -"boot situation.\n" -"\n" -" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n" -"need to allocate a large ramdisk, this option can be used to specify a\n" -"ramdisk larger than the default.\n" -"\n" -" * Read-write: normally the \"root\" partition is initially mounted as\n" -"read-only, to allow a file system check before the system becomes ``live''.\n" -"You can override the default with this option.\n" -"\n" -" * NoVideo: should the Apple video hardware prove to be exceptionally\n" -"problematic, you can select this option to boot in ``novideo'' mode, with\n" -"native frame buffer support.\n" -"\n" -" * Default: selects this entry as being the default Linux selection,\n" -"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n" -"highlighted with a ``*'' if you press [Tab] to see the boot selections." -msgstr "" -"ziHb yaboot sWB~ءAOΨӱҰʨL@~tζءB֤߶ةΪ" -"Oĵ}֤ɮC\n" -"\n" -"wnsW@ӱҰʨL@~tζبӬݡAܤ֭n]t@ \"\" Pڤΰϩ" -"bmءC\n" -"\n" -"w Linux ӻAܤ֥]tO:\n" -"\n" -" * : NO LabelAoӶشNO@ӥiHzb}ܰTɿJӦW١AYi" -"ϥθӧ@~tζ}C\n" -"\n" -" * ֤: NO ImageAoӶجOVnϥθӮ֤ɮ}ɮצW١C@" -"ANOϥ vmlinuz Ϊ̬O vmlinuz-2.4.8 oW١C\n" -"\n" -" * / ΰ: V Linux tΩҦb / ڤΰϦmC\n" -"\n" -" * [Ѽ: oiHJ@B~nǵ֤ߪѼơCb Apple WGqwg" -"˸mWAo̥iHw@ǰѼƥHKlܥd˸mAΪ̬OҰʦbLWƹ" -"˸mCUO@ǥiΪѼƫwA蹳O:\n" -"\n" -" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 " -"hda=autotune\n" -"\n" -" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" -"\n" -" * Initrd: oӰѼƬOΨӯb֤߸JɡAwJiΪҲո˸mɮסAHK" -"bJt / ΰϮɴNwgs / Ҧb˸mC@ӻAztΦw˦b " -"RAIDBSCSI ˸mWɡAtλݭnb֤߸JɶKJXʳoǵw˸mXʵ{A" -"HKU~`soǸ˸mCϥθӶخɡAtη|}ɸJ@өҿת" -"initrd-image ɮiʧ@C\n" -"\n" -" * Initrd-size: znϥ initrd-image ɡAtη|wtm@ramdiskHK" -"J initrd-image ɮרӨϥΡCӶعw]ƭȬ4096 KBytesCYOzݭntm@ӫ" -"j ramdisk ϥΡAoiHʫwC\n" -"\n" -" * / iŪg: @ӻA֤߸JtΫAw]J / ڤΰϮɡAOϥread-" -"only ŪҦAHKiHb}ɰtεwбpAIs fsck {i˴" -"@CYOALݭnܡAA~ݭnoӶض}ҡAnMijzοoӶ" -"ءC\n" -"\n" -" * NoVideo: @O Apple ܥdw˸mѨM@ǰDϥΪCMziHo" -"ؿܩ \"novideo\" ҦAtΨϥέ쥻ܤ覡C\n" -"\n" -" * w]: ܥΨӹw]}ҶءC̷Ӧwˤ覡PA}ɱzi|ݨ" -"ҦAoɭԱziHΤVܧAnҰʪءCΪ̬OAݨ쪺Oª boot: " -"ܰTAɱziHU [Tab] iHoܿJ}ؼҡC" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." -msgstr "" -"oxL \"%s\" wg\sW Star Office/OpenOffice.org/GIMP C" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "No floppy drive available!" -msgstr "SiΪnо" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"To know about the options available for the current printer read either the " -"list shown below or click on the \"Print option list\" button.%s%s%s\n" -"\n" -msgstr "" -"noثeoxLiΪѼƿﶵAΪ̬OdݤUM\n" -"ܪءAIIyCLﶵMzsC%s%s%s\n" -"\n" - -#: ../../lang.pm:1 -#, c-format -msgid "Saudi Arabia" -msgstr "Saudi Arabia" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Continue anyway?" -msgstr "ަpn~ ?" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"If your printer is not listed, choose a compatible (see printer manual) or a " -"similar one." -msgstr "pGӦLåCXAпܬۮeΪ̬O۫HLC" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer" -msgstr "L" - -#: ../../services.pm:1 -#, c-format -msgid "Internet" -msgstr "Internet" - -#: ../../standalone/service_harddrake:1 -#, c-format -msgid "Some devices were added:\n" -msgstr "@Ǹ˸mؤwgsWFG\n" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Geometry: %s cylinders, %s heads, %s sectors\n" -msgstr "wиTG %s ϬW, %s ŪgY, %s ϰ\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printing on the printer \"%s\"" -msgstr "ϥΡu%svLiCL" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore From Tape" -msgstr "ϥκϱa^s" - -#: ../../standalone/drakbug:1 -#, fuzzy, c-format -msgid "" -"To submit a bug report, click the report button, which will open your " -"default browser\n" -"to Anthill where you will be able to upload the above information as a bug " -"report." -msgstr "" -"n^ΰDAI^sC\n" -"tαN|}sósu %s\n" -" MЧAبÿJDTAHKNΰDeܥDqoiH" -"C" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Choose the profile to configure" -msgstr "пn]w" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Password minimum length and number of digits and upcase letters" -msgstr "" - -#: ../../network/ethernet.pm:1 ../../network/network.pm:1 -#, c-format -msgid "" -"\n" -"\n" -"Enter a Zeroconf host name without any dot if you don't\n" -"want to use the default host name." -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup Now from configuration file" -msgstr "̾ڥثeպA]w}lƥ" - -#: ../../fsedit.pm:1 -#, fuzzy, c-format -msgid "Mount points should contain only alphanumerical characters" -msgstr "LWӥu]t^rBƦrPuor" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Restarting printing system..." -msgstr "bsҰʦCLtΪA ..." - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "See hardware info" -msgstr "˵wT" - -# ui/evolution-calendar.xml.h:7 -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Day" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "First sector of boot partition" -msgstr "}ΰϪĤ@Ӻϰ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer manufacturer, model" -msgstr "Lt," - -#: ../../printer/data.pm:1 -#, c-format -msgid "PDQ - Print, Don't Queue" -msgstr "PDQ - Print, Don't Queue" - -#: ../../standalone.pm:1 -#, c-format -msgid "" -"[OPTIONS]...\n" -"Mandrake Terminal Server Configurator\n" -"--enable : enable MTS\n" -"--disable : disable MTS\n" -"--start : start MTS\n" -"--stop : stop MTS\n" -"--adduser : add an existing system user to MTS (requires username)\n" -"--deluser : delete an existing system user from MTS (requires " -"username)\n" -"--addclient : add a client machine to MTS (requires MAC address, IP, " -"nbi image name)\n" -"--delclient : delete a client machine from MTS (requires MAC address, " -"IP, nbi image name)" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Subnet Mask:" -msgstr "" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Set password expiration and account inactivation delays" -msgstr "" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "" -"_: load here is a noun, the load of the system\n" -"Load" -msgstr "" - -#: ../../Xconfig/monitor.pm:1 -#, c-format -msgid "" -"The two critical parameters are the vertical refresh rate, which is the " -"rate\n" -"at which the whole screen is refreshed, and most importantly the horizontal\n" -"sync rate, which is the rate at which scanlines are displayed.\n" -"\n" -"It is VERY IMPORTANT that you do not specify a monitor type with a sync " -"range\n" -"that is beyond the capabilities of your monitor: you may damage your " -"monitor.\n" -" If in doubt, choose a conservative setting." -msgstr "" -"oӰѼƤDOzùsWvAHΫܭn\n" -"sWvAe̬OzӿùvsgA\n" -"̬OqljytvC\n" -"\n" -"zSO`NAn]wWLùWeܯO\n" -"ƭȡGLWviˮ`z_QùC\n" -"YzTwùW檺ܡAпܫOu@I]wȡC" - -#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 -#, c-format -msgid "Modify" -msgstr "ק" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"The \"%s\" and \"%s\" commands also allow to modify the option settings for " -"a particular printing job. Simply add the desired settings to the command " -"line, e. g. \"%s <file>\".\n" -msgstr "" -"\n" -"\"%s\" P \"%s\" OAzקYӳ]wCLu@\n" -"ѼƳ]wC²@I覡NObROC[WznJ]wȡA\n" -" \"%s <ɮ>\"C\n" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Need hostname, username and password!" -msgstr "ݭnwDW١BϥΪ̻PKXI" - -#: ../../network/tools.pm:1 -#, c-format -msgid "Insert floppy" -msgstr "дJ@iϤ" - -#: ../../diskdrake/dav.pm:1 -#, c-format -msgid "" -"WebDAV is a protocol that allows you to mount a web server's directory\n" -"locally, and treat it like a local filesystem (provided the web server is\n" -"configured as a WebDAV server). If you would like to add WebDAV mount\n" -"points, select \"New\"." -msgstr "" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "HardDrake" -msgstr "HardDrake w鰻]w" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "new" -msgstr "s" - -#: ../../security/help.pm:1 -#, c-format -msgid "Enable/Disable syslog reports to console 12" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "Would you like to try again?" -msgstr "zn]wLCLضܡH" - -#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Wizard" -msgstr "F" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Edit selected server" -msgstr " %s " - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Please choose where you want to backup" -msgstr "пznƥ" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "You need to reboot for the partition table modifications to take place" -msgstr "zns}HϥΧʹLwФΪ" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Do not include the browser cache" -msgstr "n]ts֨" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"Failed to check filesystem %s. Do you want to repair the errors? (beware, " -"you can lose data)" -msgstr "" -"Lkˬd %s ɮרtΡAzn״_ӿ~ܡH(Ъ`NA״_iɭP)" - -#: ../../standalone/keyboarddrake:1 -#, c-format -msgid "Please, choose your keyboard layout." -msgstr "пLƦC榡O@ءC" - -#: ../../mouse.pm:1 ../../security/level.pm:1 -#, c-format -msgid "Standard" -msgstr "з" - -#: ../../standalone/mousedrake:1 -#, c-format -msgid "Please choose your mouse type." -msgstr "пƹΦC" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Connect..." -msgstr "su..." - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Failed to configure printer \"%s\"!" -msgstr "b]wu%svL ..." - -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "not configured" -msgstr "s]w" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "ISA / PCMCIA" -msgstr "ISA / PCMCIA" - -#: ../../standalone/drakfont:1 -#, fuzzy, c-format -msgid "About" -msgstr "" - -#: ../../network/network.pm:1 -#, c-format -msgid "Proxies configuration" -msgstr "]wnϥΪNzA" - -#: ../../mouse.pm:1 -#, c-format -msgid "GlidePoint" -msgstr "GlidePoint" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Start: sector %s\n" -msgstr "}l: %s ϰ\n" - -#: ../../standalone/drakconnect:1 -#, fuzzy, c-format -msgid "No Mask" -msgstr "lM" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Network interface already configured" -msgstr "wg]w" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Couldn't access the floppy!" -msgstr "Lksn" - -#: ../../install_messages.pm:1 -#, c-format -msgid "" -"Warning: Free Software may not necessarily be patent free, and some Free\n" -"Software included may be covered by patents in your country. For example, " -"the\n" -"MP3 decoders included may require a licence for further usage (see\n" -"http://www.mp3licensing.com for more details). If you are unsure if a " -"patent\n" -"may be applicable to you, check your local laws." -msgstr "" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "Mail Server" -msgstr "Mail A" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Please click on a partition" -msgstr "I@Ӥΰ" - -#: ../../printer/main.pm:1 -#, c-format -msgid "Multi-function device on HP JetDirect" -msgstr "HP JetDirect Wh\˸m" - -#: ../../any.pm:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Linux" -msgstr "Linux" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Have a nice day!" -msgstr "n@ѡI" - -#: ../../help.pm:1 -#, c-format -msgid "/dev/fd0" -msgstr "/dev/fd0" - -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "Upgrade %s" -msgstr "ɯ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Select Printer Connection" -msgstr "ܦLsu" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Scanning for TV channels in progress ..." -msgstr "dzƶ}lyqWD" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Error during sending file via FTP.\n" -" Please correct your FTP configuration." -msgstr "" -"ϥ FTP WɮɵoͿ~C\n" -"˵z FTP ]wO_]wC" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "IP Range Start:" -msgstr "" - -#: ../../services.pm:1 -#, c-format -msgid "" -"The internet superserver daemon (commonly called inetd) starts a\n" -"variety of other internet services as needed. It is responsible for " -"starting\n" -"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " -"disables\n" -"all of the services it is responsible for." -msgstr "" -"internet superserver daemon (@٩I inetd)ANO telnetBftp,\n" -"rshBrlogin oAȪťAMᦳsuШDɡAbکIsѪAȪ\n" -"{iͷqʧ@CoӶءAoӪAȥNťҰʪ\n" -"رN|Lkϥ" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "the height of the progress bar" -msgstr " iBar " - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"- Save via %s on host: %s\n" -msgstr "" -"\n" -"- xs %s x - %s\n" - -#: ../../lang.pm:1 ../../standalone/drakxtv:1 -#, c-format -msgid "Argentina" -msgstr "ڧ" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "Domain Name Server" -msgstr "DNS A" - -#: ../../standalone/draksec:1 -#, c-format -msgid "Security Level:" -msgstr "w:" - -#: ../../fsedit.pm:1 -#, c-format -msgid "Mount points must begin with a leading /" -msgstr "wIݥH / }Y" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Choose your CD/DVD device" -msgstr "пz CD/DVD eqjp" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Postfix Mail Server" -msgstr "Postfix lA" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Quit without saving" -msgstr "xsN}" - -#: ../../lang.pm:1 -#, c-format -msgid "Yemen" -msgstr "Yemen" - -#: ../../share/advertising/11-mnf.pl:1 -#, c-format -msgid "This product is available on the MandrakeStore Web site." -msgstr "ziHzL MandrakeStore xohӲ~T" - -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "=> There are many things to choose from (%s).\n" -msgstr "%s WܦhإiѿܡC\n" - -#: ../../steps.pm:1 -#, c-format -msgid "Hard drive detection" -msgstr "wа" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"You haven't selected any group of packages.\n" -"Please choose the minimal installation you want:" -msgstr "" -"zåMs\n" -"пܱzһݭn̤pw" - -#: ../../network/adsl.pm:1 -#, c-format -msgid "" -"You need the Alcatel microcode.\n" -"You can provide it now via a floppy or your windows partition,\n" -"or skip and do it later." -msgstr "" - -#: ../../diskdrake/dav.pm:1 -#, c-format -msgid "Please enter the WebDAV server URL" -msgstr "пJ WevDAV D URL" - -#: ../../lang.pm:1 -#, c-format -msgid "Tajikistan" -msgstr "Tajikistan" - -#: ../../help.pm:1 ../../install_steps_gtk.pm:1 -#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 -#, c-format -msgid "Accept" -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Description" -msgstr "yz" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Please enter summary text." -msgstr "" - -#: ../../fsedit.pm:1 -#, c-format -msgid "Error opening %s for writing: %s" -msgstr "b} %s HgJɮɵoͿ~G %s" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Mouse type: %s\n" -msgstr "ƹG %s\n" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Your card can have 3D hardware acceleration support with XFree %s." -msgstr "zܥdft XFree %s 3D w[t\C" - -#: ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Choose a monitor" -msgstr "XAù" - -#: ../../any.pm:1 -#, c-format -msgid "Empty label not allowed" -msgstr "ҤiHť" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Maltese (UK)" -msgstr "Ly (UK)" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "I can't add any more partition" -msgstr "{LkAsWΰϤF" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Size in MB: " -msgstr "jp (MB)G " - -#: ../../printer/main.pm:1 -#, c-format -msgid "Remote printer" -msgstr "ݦL" - -#: ../../any.pm:1 -#, c-format -msgid "Please choose a language to use." -msgstr "пܭnϥΨӻytC" - -#: ../../network/network.pm:1 -#, c-format -msgid "" -"WARNING: this device has been previously configured to connect to the " -"Internet.\n" -"Simply accept to keep this device configured.\n" -"Modifying the fields below will override this configuration." -msgstr "" -"ĵi: oӸ˸mewgQ]w̬suInternetؤFC\n" -"YOznoӸ˸m]wAпܱC\n" -"YOzקUAN|V쥻]wC" - -#: ../../any.pm:1 -#, c-format -msgid "I can set up your computer to automatically log on one user." -msgstr "" -"{b]w}۰ʥHYӨϥΪ̨nJtΡC\n" -"znϥγoӥ\ܡH" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Floppy format" -msgstr "榡" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Generic Printers" -msgstr "@L" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Please choose the printer to which the print jobs should go or enter a " -"device name/file name in the input line" -msgstr "пܱzLsAΪ̬OJӸ˸mW" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "The scanners on this machine are available to other computers" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "First sector of the root partition" -msgstr "ڤjϪĤ@" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Alternative drivers" -msgstr "t~iѿܪXʵ{" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"Please check all options that you need.\n" -msgstr "" -"\n" -"˵zһݭnءC\n" - -#: ../../any.pm:1 -#, c-format -msgid "Initrd" -msgstr "Initrd" - -#: ../../lang.pm:1 -#, c-format -msgid "Cape Verde" -msgstr "Cape Verde" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "whether this cpu has the Cyrix 6x86 Coma bug" -msgstr "" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Loading printer configuration... Please wait" -msgstr "קL]w" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Guam" -msgstr "Guam" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Please choose the port that your printer is connected to or enter a device " -"name/file name in the input line" -msgstr "пܱzLsAΪ̬OJӸ˸mW" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "/Options/Test" -msgstr "/ﶵ/" - -#: ../../security/level.pm:1 -#, c-format -msgid "" -"This level is to be used with care. It makes your system more easy to use,\n" -"but very sensitive. It must not be used for a machine connected to others\n" -"or to the Internet. There is no password access." -msgstr "" -"w]wboӵŮɥnD`ԷVA\n" -"|ztΥΰ_ӧ[²KAiOo\n" -"}a: oӳ]wӳQΦbsuInternet\n" -"DA]Ҧsʧ@SαKX[H\n" -"C" - -#: ../../fs.pm:1 -#, fuzzy, c-format -msgid "Mounting partition %s" -msgstr "b榡Ƥΰ %s" - -#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "User name" -msgstr "ϥΪ̱b" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Userdrake" -msgstr "Userdrake ϥΪ̺z" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Which partition do you want to use for Linux4Win?" -msgstr "zƱnΨӤΰϵ Linux4Win ӨϥΩOH" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Test pages" -msgstr "CLխ" - -#: ../../diskdrake/interactive.pm:1 -#, fuzzy, c-format -msgid "Logical volume name " -msgstr "KX" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"List of data to restore:\n" -"\n" -msgstr "" -"n^sƲM:\n" -"\n" - -#: ../../fs.pm:1 -#, c-format -msgid "Checking %s" -msgstr "ˬd %s" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "TCP/Socket Printer Options" -msgstr "TCP/Socket Lﶵ" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Card mem (DMA)" -msgstr "d mem (DMA)" - -#: ../../standalone/net_monitor:1 -#, fuzzy, c-format -msgid "Disconnecting from Internet " -msgstr "su Internet" - -#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 -#, c-format -msgid "France" -msgstr "k" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "browse" -msgstr "s" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Checking installed software..." -msgstr "bˬdwgw˪n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remote printer name missing!" -msgstr "SwLW !" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Do you want to enable printing on printers in the local network?\n" -msgstr "zn}ҤLCLAȶܡH\n" - -#: ../../lang.pm:1 -#, c-format -msgid "Turkey" -msgstr "Turkey" - -#: ../../network/adsl.pm:1 -#, c-format -msgid "Alcatel speedtouch usb" -msgstr "Alcatel speedtouch USB" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Number of buttons" -msgstr "ӫ" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Vietnamese \"numeric row\" QWERTY" -msgstr "Vn \"numeric row\" QWERTY " - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Module" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"In addition, queues not created with this program or \"foomatic-configure\" " -"cannot be transferred." -msgstr "" -"~Aqueues LkzLӵ{إߡAΪ̬O \"foomatic-configure\"\n" -"LkiǿC" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Hardware" -msgstr "w" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Ctrl and Alt keys simultaneously" -msgstr "Ctrl P Alt զX" - -#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 -#, c-format -msgid "United States" -msgstr "" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "User umask" -msgstr "ϥΪ" - -#: ../../any.pm:1 -#, c-format -msgid "Default OS?" -msgstr "w] OS ?" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Swiss (German layout)" -msgstr "h (wꦡtm)" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Configure all heads independently" -msgstr "]wҦܥd" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "" -"Please choose the printer you want to set up. The configuration of the " -"printer will work fully automatically. If your printer was not correctly " -"detected or if you prefer a customized printer configuration, turn on " -"\"Manual configuration\"." -msgstr "" -"UCXO۰ʰҧ쪺LCLպA]w\n" -"۰ʧӤݭnt~]wCYOUCXҧ쪺L\n" -"äOzҹwAΪ̬OAƱʤ覡]wAпܡyʳ]wzC" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "NTP Server" -msgstr "NTP AD" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Sulogin(8) in single user level" -msgstr "" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Load/Save on floppy" -msgstr "ѳnиJ/xs" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "This theme does not yet have a bootsplash in %s !" -msgstr "%s |}Je" - -#: ../../pkgs.pm:1 -#, c-format -msgid "nice" -msgstr "nΪ" - -#: ../../Xconfig/test.pm:1 -#, fuzzy, c-format -msgid "Leaving in %d seconds" -msgstr "%d " - -#: ../../network/modem.pm:1 -#, c-format -msgid "Please choose which serial port your modem is connected to." -msgstr "пzƾھsǦCC" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Property" -msgstr "S" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Ghostscript" -msgstr "GhostScript" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "LAN Configuration" -msgstr "ϰ]w" - -#: ../../lang.pm:1 -#, c-format -msgid "Ghana" -msgstr "Ghana" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Path or Module required" -msgstr "ݭnJ|άOҲզW" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Advanced Options" -msgstr "iﶵ" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "View Configuration" -msgstr "պA]w" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Coma bug" -msgstr "" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"At this point, you need to choose which partition(s) will be used for the\n" -"installation of your Mandrake Linux system. If partitions have already been\n" -"defined, either from a previous installation of GNU/Linux or by another\n" -"partitioning tool, you can use existing partitions. Otherwise, hard drive\n" -"partitions must be defined.\n" -"\n" -"To create partitions, you must first select a hard drive. You can select\n" -"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" -"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" -"\n" -"To partition the selected hard drive, you can use these options:\n" -"\n" -" * \"%s\": this option deletes all partitions on the selected hard drive\n" -"\n" -" * \"%s\": this option enables you to automatically create ext3 and swap\n" -"partitions in the free space of your hard drive\n" -"\n" -"\"%s\": gives access to additional features:\n" -"\n" -" * \"%s\": saves the partition table to a floppy. Useful for later\n" -"partition-table recovery if necessary. It is strongly recommended that you\n" -"perform this step.\n" -"\n" -" * \"%s\": allows you to restore a previously saved partition table from a\n" -"floppy disk.\n" -"\n" -" * \"%s\": if your partition table is damaged, you can try to recover it\n" -"using this option. Please be careful and remember that it doesn't always\n" -"work.\n" -"\n" -" * \"%s\": discards all changes and reloads the partition table that was\n" -"originally on the hard drive.\n" -"\n" -" * \"%s\": unchecking this option will force users to manually mount and\n" -"unmount removable media such as floppies and CD-ROMs.\n" -"\n" -" * \"%s\": use this option if you wish to use a wizard to partition your\n" -"hard drive. This is recommended if you do not have a good understanding of\n" -"partitioning.\n" -"\n" -" * \"%s\": use this option to cancel your changes.\n" -"\n" -" * \"%s\": allows additional actions on partitions (type, options, format)\n" -"and gives more information about the hard drive.\n" -"\n" -" * \"%s\": when you are finished partitioning your hard drive, this will\n" -"save your changes back to disk.\n" -"\n" -"When defining the size of a partition, you can finely set the partition\n" -"size by using the Arrow keys of your keyboard.\n" -"\n" -"Note: you can reach any option using the keyboard. Navigate through the\n" -"partitions using [Tab] and the [Up/Down] arrows.\n" -"\n" -"When a partition is selected, you can use:\n" -"\n" -" * Ctrl-c to create a new partition (when an empty partition is selected)\n" -"\n" -" * Ctrl-d to delete a partition\n" -"\n" -" * Ctrl-m to set the mount point\n" -"\n" -"To get information about the different file system types available, please\n" -"read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." -msgstr "" -"boӶqAzݭnܭnΨӦwˡyMandrake-LinuxztΪΰϡCziHs" -"sΰϨӨϥΡAΪ̬Oϥέ쥻wgnNΰϡC\n" -"\n" -"nإ߷sΰϡAzݭnܤ@xwжiާ@CuhdavBuhdbvo " -"IDE wи˸mAΪ̬Ousdav.. SCSI wи˸mC\n" -"\n" -"iΪʧ@Abzn@xwи˸mAzoǶإiHϥ:\n" -"\n" -" *yMzGoӶرN|ҿwФWҦΰϳMC\n" -"\n" -" *y۰ʰtmzGoӶرN|۰ʧMҿwгѾliΪŶA۰ʹX" -"uExt2vPuswapvΰ϶iw˨ϥΡC\n" -"\n" -" *yhzGѶiﶵ]w:\n" -"\n" -" *yxsܺϤzGثeΪAxsϤAHKbYҤUiH" -"ӫϴ_CijAYOxϺйAiHhQγoӶءC\n" -"\n" -" *yJnФ]wȡzGoӶد^sexsbϤwЪΪ" -"A\n" -"\n" -" *yϴΰϡzGpGzΰϷlFA]\ziHϥγoӶضiϪ" -"@CLФpߨϥγoӶءAHקKͧhh~C\n" -"\n" -" *y_ΰϡzG誺ϺФΪާ@ܧC\n" -"\n" -" *yŪΰϡzGnϺХʧ@Aæ^̭쥻AA{s" -"Ūz̭쥻AC\n" -"\n" -" *yi˸m۰ʱzGYOzƱ۰ʪJϺФPФܡAп" -"ӶءC\n" -"\n" -" *yFzGpGzƱѵ{z۰ʤtϺФΪܡAiHϥθӶءC@" -"ijǪ̨ӨϥΡC\n" -"\n" -" *yܤ@/MaҦzGѧhB~ΰϸT (BﶵB榡) " -"C\n" -"\n" -" *yzGzϺйʧ@ɡAпܳoӶءAHKثeΪGg" -"JwЧsC\n" -"\n" -"Ъ`NGoziHhQ [Tab] P [Up/Down] өϺФεeާ@C\n" -"\n" -"n@ӤΰϮɡAziHϥ:\n" -"\n" -" * Ctrl-cGإߤ@ӷsΰ (ŪΰϳQɨϥ);\n" -"\n" -" * Ctrl-dGRӤΰ;\n" -"\n" -" * Ctrl-mG]wӤΰϪIC\n" -"\n" -"pGzOϥ PowerPC Azݭnij@Ӥj 1MB HFSΰϧ@yaboot}" -"{ϥΡAHK yaboot }{Ұ Linux tΡCMA@ڭ̫" -"ijAziHoOdΰϦj@IŶAOd@u20MvΰϡAz" -"NbӤΰϤWm\h}֤߬ɮרӨϥΡC" - -#: ../../help.pm:1 -#, c-format -msgid "" -"Graphic Card\n" -"\n" -" The installer will normally automatically detect and configure the\n" -"graphic card installed on your machine. If it is not the case, you can\n" -"choose from this list the card you actually have installed.\n" -"\n" -" In the case that different servers are available for your card, with or\n" -"without 3D acceleration, you are then asked to choose the server that best\n" -"suits your needs." -msgstr "" - -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "There was an error installing packages:" -msgstr "wˮMɵoͿ~G" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Lexmark inkjet configuration" -msgstr "Lexmark QL]w" - -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Undo" -msgstr "_" - -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Save partition table" -msgstr "gJwФΪ" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Finnish" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Macedonia" -msgstr "y" - -#: ../../any.pm:1 -#, c-format -msgid "" -"The per-user sharing uses the group \"fileshare\". \n" -"You can use userdrake to add a user to this group." -msgstr "" -"CӨϥΪ̪ɳOϥΡyfilesharezӸsժ]wC\n" -"ziHyuserdrakez{bӸsդ[JϥΪ̧YiC" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Slovenian" -msgstr "k" - -#: ../../security/help.pm:1 -#, c-format -msgid "" -"Authorize:\n" -"\n" -"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " -"set to \"ALL\",\n" -"\n" -"- only local ones if set to \"LOCAL\"\n" -"\n" -"- none if set to \"NONE\".\n" -"\n" -"To authorize the services you need, use /etc/hosts.allow (see hosts.allow" -"(5))." -msgstr "" - -#: ../../lang.pm:1 -#, fuzzy, c-format -msgid "Libya" -msgstr "QQ" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Configuring scripts, installing software, starting servers..." -msgstr "]w script, w˳nAҰʬ servers A" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Printer on parallel port #%s" -msgstr "LæC \\/*%s" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"- Burn to CD" -msgstr "" -"\n" -"- N CD " - -#: ../../any.pm:1 -#, c-format -msgid "Table" -msgstr "Ϊ" - -#: ../../fs.pm:1 -#, c-format -msgid "I don't know how to format %s in type %s" -msgstr "DnpN %s 榡Ƭ %s 榡" - -#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 -#, c-format -msgid "Model" -msgstr "" - -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "USB printer #%s" -msgstr "USB L \\/*%s" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Stop Server" -msgstr "A" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "" -"\n" -"Select the theme for\n" -"lilo and bootsplash,\n" -"you can choose\n" -"them separately" -msgstr "" -"\n" -"п lilo P}JeءA\n" -"ziH}" - -#: ../../harddrake/data.pm:1 -#, fuzzy, c-format -msgid "Modem" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Tuvalu" -msgstr "Tuvalu" - -#: ../../help.pm:1 ../../network/netconnect.pm:1 -#, c-format -msgid "Use auto detection" -msgstr "ϥΦ۰ʰ" - -#: ../../services.pm:1 -#, c-format -msgid "" -"GPM adds mouse support to text-based Linux applications such the\n" -"Midnight Commander. It also allows mouse-based console cut-and-paste " -"operations,\n" -"and includes support for pop-up menus on the console." -msgstr "" -"GPM tΦbrҦUXܥXƹСAb Midnight Commander\n" -"o{ҨϥΡCt~ٯ䴩brҦUùrŶKƻs\C" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Started on boot" -msgstr "}ɱҰ" - -#: ../../share/advertising/12-mdkexpert.pl:1 -#, c-format -msgid "" -"Join the MandrakeSoft support teams and the Linux Community online to share " -"your knowledge and help others by becoming a recognized Expert on the online " -"technical support website:" -msgstr "" -"[J MandrakeSoft Support AåBzLuWҤ\n" -"zgAzUѨMϥΪ̺ðݥ~AåB Linux MaC" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "No password aging for" -msgstr "SKX" - -#: ../../standalone/draksec:1 -#, c-format -msgid "" -"The following options can be set to customize your\n" -"system security. If you need an explanation, look at the help tooltip.\n" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Automatically find available printers on remote machines" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "East Timor" -msgstr "East Timor" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "On Tape Device" -msgstr "ϱa˸m" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"- Save to Tape on device: %s" -msgstr "" -"\n" -"- xsӺϱa˸mG%s" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Login name" -msgstr "W" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Report unowned files" -msgstr "" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Del profile..." -msgstr "R]wɤ..." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Installing Foomatic..." -msgstr "bw Foomatic M..." - -#: ../../standalone/XFdrake:1 -#, c-format -msgid "Please log out and then use Ctrl-Alt-BackSpace" -msgstr "еnXAM Ctrl-Alt-BackSpace sҰ X" - -#: ../../network/netconnect.pm:1 -#, fuzzy, c-format -msgid "detected" -msgstr " %s " - -#: ../../network/netconnect.pm:1 -#, fuzzy, c-format -msgid "The network needs to be restarted. Do you want to restart it ?" -msgstr "o %s MݭnwˤWAznw˸ӮMܡH" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Package: " -msgstr "MG " - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Can't write /etc/sysconfig/bootsplash." -msgstr "LkgJ /etc/sysconfig/bootsplashC" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "SECURITY WARNING!" -msgstr "wĵi" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "StarOffice" -msgstr "StarOffice" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "No, I don't want autologin" -msgstr "Aڤݭn۰ʵnJ (AutoLogin)" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Windows Migration tool" -msgstr "Windows Xu" - -#: ../../any.pm:1 ../../help.pm:1 -#, c-format -msgid "All languages" -msgstr "Ҧy" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Removing %s" -msgstr "b %s" - -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "%s not found...\n" -msgstr "%s S`^" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Testing your connection..." -msgstr "bպsu" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "Cache size" -msgstr "նjp" - -#: ../../security/level.pm:1 -#, c-format -msgid "" -"Passwords are now enabled, but use as a networked computer is still not " -"recommended." -msgstr "wҰʱKX{ҥ\AMijNtιB@WҡC" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Start sector: " -msgstr "}lϰϡG " - -#: ../../lang.pm:1 -#, c-format -msgid "Congo (Brazzaville)" -msgstr "" - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Read" -msgstr "" - -#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 -#, c-format -msgid "The package %s needs to be installed. Do you want to install it?" -msgstr "o %s MݭnwˤWAznw˸ӮMܡH" - -#: ../../lang.pm:1 -#, c-format -msgid "Seychelles" -msgstr "Seychelles" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Printerdrake has compared the model name resulting from the printer auto-" -"detection with the models listed in its printer database to find the best " -"match. This choice can be wrong, especially when your printer is not listed " -"at all in the database. So check whether the choice is correct and click " -"\"The model is correct\" if so and if not, click \"Select model manually\" " -"so that you can choose your printer model manually on the next screen.\n" -"\n" -"For your printer Printerdrake has found:\n" -"\n" -"%s" -msgstr "" -"PrinterDrake {wgF{ƮwHΦ۰ʰGAHKX̾A" -"ΪLCoӵGiDAרzLبèSnObثew" -"ƮwɡAҥH˵oӵGO_TAnɽпܡuʿܫvجD" -"XTءC\n" -"\n" -"ثe PrinterDrake {ҧ쪺LئpUG\n" -"\n" -"%s" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Bad password on %s" -msgstr "%s - ~KX" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"There is one unknown printer directly connected to your system" -msgstr "" -"\n" -"ثe@xLw˦bzWC" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Right Control key" -msgstr "k Alt " - -#: ../../network/tools.pm:1 -#, fuzzy, c-format -msgid "" -"Insert a FAT formatted floppy in drive %s with %s in root directory and " -"press %s" -msgstr "Цb %s Jwg榡(FAT榡)ϺФ" - -#: ../../lang.pm:1 -#, c-format -msgid "Zambia" -msgstr "Zambia" - -#: ../../security/level.pm:1 -#, c-format -msgid "Security Administrator (login or email)" -msgstr "wʺz (login άO email)" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Sorry, we support only 2.4 kernels." -msgstr "pAثeu䴩ϥ 2.4 ֤ߪC" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Romanian (qwerty)" -msgstr "ù (qwerty)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Under Devel ... please wait." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Egypt" -msgstr "Egypt" - -#: ../../crypto.pm:1 ../../lang.pm:1 -#, c-format -msgid "Czech Republic" -msgstr "J@M" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Sound card" -msgstr "ĥd" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Import Fonts" -msgstr "rפJ" - -#: ../../diskdrake/hd_gtk.pm:1 -#, fuzzy, c-format -msgid "" -"You have one big MicroSoft Windows partition.\n" -"I suggest you first resize that partition\n" -"(click on it, then click on \"Resize\")" -msgstr "" -"z@ӫܤj fat ΰ (MicroSoft \n" -"Dos/Windows @~tΥΪ榡)Aijz\n" -"]oӤΰϪjp (IoӤΰϡAM\n" -" \"ܤjp\" )" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Suppress Temporary Files" -msgstr "RȮɮ" - -#: ../../network/netconnect.pm:1 -#, fuzzy, c-format -msgid "" -"Congratulations, the network and Internet configuration is finished.\n" -"\n" -msgstr "" -" ! ]wպAwg]wFC\n" -"ztΤwgϥθӳ]wC\n" -"\n" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Change partition type" -msgstr "ܤΰϮ榡" - -#: ../../help.pm:1 -#, c-format -msgid "" -"Resolution\n" -"\n" -" Here you can choose the resolutions and color depths available for your\n" -"hardware. Choose the one that best suits your needs (you will be able to\n" -"change that after installation though). A sample of the chosen\n" -"configuration is shown in the monitor." -msgstr "" - -#: ../../standalone/draksec:1 -#, c-format -msgid "Network Options" -msgstr "ﶵ" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Enable msec hourly security check" -msgstr "" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "" -"Display theme\n" -"under console" -msgstr "" -"b console\n" -"ܧG" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Statistics" -msgstr "" - -#: ../../printer/cups.pm:1 -#, c-format -msgid "(on %s)" -msgstr "( %s)" - -#: ../../mouse.pm:1 -#, c-format -msgid "MM Series" -msgstr "MM Series" - -#: ../../security/level.pm:1 -#, c-format -msgid "" -"A library which defends against buffer overflow and format string attacks." -msgstr "mwİϷP榡Ʀro{wMC" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "average" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "New printer name" -msgstr "sLW" - -#: ../../fs.pm:1 -#, c-format -msgid "" -"Allow an ordinary user to mount the file system. The\n" -"name of the mounting user is written to mtab so that he can unmount the " -"file\n" -"system again. This option implies the options noexec, nosuid, and nodev\n" -"(unless overridden by subsequent options, as in the option line\n" -"user,exec,dev,suid )." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Equatorial Guinea" -msgstr "Equatorial Guinea" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup System" -msgstr "ƥtθ" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Build Backup" -msgstr "إ߳ƥ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"To print a file from the command line (terminal window) use the command \"%s " -"<file>\" or \"%s <file>\".\n" -msgstr "" -"nbݾROCҦCLɮתܡAziHoӫO: \"%s <ɮ>\" Ϊ̬O " -"\"%s <ɮ>\"C\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Currently, no alternative possibility is available" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Romanian (qwertz)" -msgstr "ù (qwertz)" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Write Config" -msgstr "gJ]w" - -#: ../../services.pm:1 -#, c-format -msgid "" -"The routed daemon allows for automatic IP router table updated via\n" -"the RIP protocol. While RIP is widely used on small networks, more complex\n" -"routing protocols are needed for complex networks." -msgstr "" -"routed Aȵ{\zL RIP qTwӧsѪTC\n" -"@ӻARIP Opγ~ϥΡC" - -#: ../../lang.pm:1 -#, c-format -msgid "Kiribati" -msgstr "Kiribati" - -#: ../../mouse.pm:1 -#, fuzzy, c-format -msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" -msgstr "Logitech Mouse (serial, old C7 type)" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Other (not drakbackup) keys in place already" -msgstr "" -"L (D drakbackup)\n" -"{Ҿɮפwgsb" - -#: ../../help.pm:1 -#, c-format -msgid "" -"X (for X Window System) is the heart of the GNU/Linux graphical interface\n" -"on which all the graphical environments (KDE, GNOME, AfterStep,\n" -"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n" -"\n" -"You will be presented with a list of different parameters to change to get\n" -"an optimal graphical display: Graphic Card\n" -"\n" -" The installer will normally automatically detect and configure the\n" -"graphic card installed on your machine. If it is not the case, you can\n" -"choose from this list the card you actually have installed.\n" -"\n" -" In the case that different servers are available for your card, with or\n" -"without 3D acceleration, you are then asked to choose the server that best\n" -"suits your needs.\n" -"\n" -"\n" -"\n" -"Monitor\n" -"\n" -" The installer will normally automatically detect and configure the\n" -"monitor connected to your machine. If it is incorrect, you can choose from\n" -"this list the monitor you actually have connected to your computer.\n" -"\n" -"\n" -"\n" -"Resolution\n" -"\n" -" Here you can choose the resolutions and color depths available for your\n" -"hardware. Choose the one that best suits your needs (you will be able to\n" -"change that after installation though). A sample of the chosen\n" -"configuration is shown in the monitor.\n" -"\n" -"\n" -"\n" -"Test\n" -"\n" -" the system will try to open a graphical screen at the desired\n" -"resolution. If you can see the message during the test and answer \"%s\",\n" -"then DrakX will proceed to the next step. If you cannot see the message, it\n" -"means that some part of the autodetected configuration was incorrect and\n" -"the test will automatically end after 12 seconds, bringing you back to the\n" -"menu. Change settings until you get a correct graphical display.\n" -"\n" -"\n" -"\n" -"Options\n" -"\n" -" Here you can choose whether you want to have your machine automatically\n" -"switch to a graphical interface at boot. Obviously, you want to check\n" -"\"%s\" if your machine is to act as a server, or if you were not successful\n" -"in getting the display configured." -msgstr "" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "Browse" -msgstr "s" - -#: ../../harddrake/data.pm:1 -#, fuzzy, c-format -msgid "CDROM" -msgstr " CDROM ˸m" - -#: ../../network/tools.pm:1 -#, c-format -msgid "Do you want to try to connect to the Internet now?" -msgstr "zQnյ۳su Internet W?" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Belgian" -msgstr "Q" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Do you have an ISA sound card?" -msgstr "ztΦ ISA ĥdܡH" - -#: ../../network/ethernet.pm:1 -#, c-format -msgid "" -"No ethernet network adapter has been detected on your system.\n" -"I cannot set up this connection type." -msgstr "tΰ즳dwˡCҥHLk]wsC" - -#: ../../diskdrake/hd_gtk.pm:1 -#, fuzzy, c-format -msgid "Windows" -msgstr "Windows " - -#: ../../common.pm:1 -#, c-format -msgid "Can't make screenshots before partitioning" -msgstr "b|iΫeLkѵe\" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Host Name" -msgstr "DW" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "/File/Save _As" -msgstr "/ɮ/tss (_A)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"To get access to printers on remote CUPS servers in your local network you " -"only need to turn on the \"Automatically find available printers on remote " -"machines\" option; the CUPS servers inform your machine automatically about " -"their printers. All printers currently known to your machine are listed in " -"the \"Remote printers\" section in the main window of Printerdrake. If your " -"CUPS server(s) is/are not in your local network, you have to enter the IP " -"address(es) and optionally the port number(s) here to get the printer " -"information from the server(s)." -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "%s is not in the scanner database, configure it manually?" -msgstr "byƮw䤣즹 - %sAznʳ]wܡH" - -#: ../../any.pm:1 -#, c-format -msgid "Delay before booting default image" -msgstr "bҰʧ@~tΫe𪺮ɶ" - -#: ../../any.pm:1 -#, c-format -msgid "Restrict command line options" -msgstr "b boot: OJѼ" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "East Europe" -msgstr "F" - -#: ../../help.pm:1 ../../install_interactive.pm:1 -#, c-format -msgid "Use free space" -msgstr "ϥΥΨ쪺Ŷ" - -#: ../../network/adsl.pm:1 -#, c-format -msgid "use dhcp" -msgstr "ϥ dhcp" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Mail alert" -msgstr "lĵ" - -#: ../../network/tools.pm:1 -#, c-format -msgid "Internet configuration" -msgstr "Internet ]w" - -#: ../../lang.pm:1 -#, c-format -msgid "Uzbekistan" -msgstr "Uzbekistan" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Detected %s" -msgstr " %s" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "/Autodetect _printers" -msgstr "۰ʰ" - -#: ../../interactive.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1 -#, c-format -msgid "Finish" -msgstr "" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Show automatically selected packages" -msgstr "ܦ۰ʿM" - -#: ../../lang.pm:1 -#, c-format -msgid "Togo" -msgstr "Togo" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "CPU flags reported by the kernel" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Something went wrong! - Is mkisofs installed?" -msgstr "s@ɵoͿ~AzT{Aw mkisofs {" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "16 MB" -msgstr "16 MB" - -#: ../../any.pm:1 ../../install_steps_interactive.pm:1 -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Please try again" -msgstr "ЦAդ@" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "The model is correct" -msgstr "ӫT" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "FAT resizing failed: %s" -msgstr "FAT wjpѡG %s" - -#: ../../help.pm:1 ../../install_steps_gtk.pm:1 -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Individual package selection" -msgstr "@M" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "This partition is not resizeable" -msgstr "oӤΰϵLkվjp" - -#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 -#, c-format -msgid "Location" -msgstr "m" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "USA (cable-hrc)" -msgstr " (cable-hrc)" - -#: ../../lang.pm:1 -#, c-format -msgid "Guatemala" -msgstr "Guatemala" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Journalised FS" -msgstr "Journalised FS" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Ethernet cards promiscuity check" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "This machine" -msgstr "(oӾW)" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "DOS drive letter: %s (just a guess)\n" -msgstr "DOS UϺХNG %s (qȡAȨѰѦ)\n" - -#: ../../lang.pm:1 -#, c-format -msgid "Bahrain" -msgstr "Bahrain" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Select the files or directories and click on 'OK'" -msgstr "ɮשΪ̬OؿAMI '[J'" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "omit scsi modules" -msgstr "ٲ scsi Ҳ" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "family of the cpu (eg: 6 for i686 class)" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "" -"Because you are doing a network installation, your network is already " -"configured.\n" -"Click on Ok to keep your configuration, or cancel to reconfigure your " -"Internet & Network connection.\n" -msgstr "" -"]zOzLwˡAҥHzպAwg]wLFC\n" -"ziHITwϥέ쥻]wպAAΪ̬O\n" -"ӭs]wsu覡C\n" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Run the daily security checks" -msgstr "" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Keyboard layout: %s\n" -msgstr "LΦG %s\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Here you can choose whether the printers connected to this machine should be " -"accessable by remote machines and by which remote machines." -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Maltese (US)" -msgstr "Ly (US)" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "The creation of the boot floppy has been successfully completed \n" -msgstr "" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Mounts and unmounts all Network File System (NFS), SMB (Lan\n" -"Manager/Windows), and NCP (NetWare) mount points." -msgstr "" -"PUҦɮרtΡA蹳O ɮרt(NFS), SMB, \n" -"NCP (NetWare) oC" - -#: ../../standalone/drakconnect:1 -#, fuzzy, c-format -msgid "Launch the wizard" -msgstr "Io̱Ұʳ]wF ->" - -#: ../../harddrake/data.pm:1 -#, fuzzy, c-format -msgid "Tvcard" -msgstr "qd" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "Toggle between normal/expert mode" -msgstr "@Ҧ" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Size" -msgstr "jp" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "GRUB" -msgstr "GB" - -#: ../../lang.pm:1 -#, c-format -msgid "Greenland" -msgstr "Greenland" - -#: ../../mouse.pm:1 -#, c-format -msgid "Logitech MouseMan+/FirstMouse+" -msgstr "Logitech MouseMan+/FirstMouse+" - -# calendar/gui/dialogs/cal-prefs-dialog.glade.h:47 -# calendar/gui/event-editor.c:478 -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Thursday" -msgstr "P|" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Not the correct tape label. Tape is labelled %s." -msgstr "TϱaҡAϱaҬ %sC" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"The setup of Internet Connection Sharing has already been done.\n" -"It's currently enabled.\n" -"\n" -"What would you like to do?" -msgstr "" -"ثe Internet suɪ]wwgF.. ثewgiΤF..\n" -"zثenOH" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Delete All NBIs" -msgstr "RҦ NBI" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"This dialog allows you to fine tune your bootloader:\n" -"\n" -" * \"%s\": there are three choices for your bootloader:\n" -"\n" -" * \"%s\": if you prefer grub (text menu).\n" -"\n" -" * \"%s\": if you prefer LILO with its text menu interface.\n" -"\n" -" * \"%s\": if you prefer LILO with its graphical interface.\n" -"\n" -" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n" -"you prefer, the bootloader can be installed on the second hard drive\n" -"(\"%s\"), or even on a floppy disk (\"%s\");\n" -"\n" -" * \"%s\": after a boot or a reboot of the computer, this is the delay\n" -"given to the user at the console to select a boot entry other than the\n" -"default.\n" -"\n" -"!! Beware that if you choose not to install a bootloader (by selecting\n" -"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n" -"system! Be sure you know what you are doing before changing any of the\n" -"options. !!\n" -"\n" -"Clicking the \"%s\" button in this dialog will offer advanced options which\n" -"are normally reserved for the expert user." -msgstr "" -"LILO P GRUB O GNU/Linux }Ұʵ{C@ӻAoӳ]wqO۰" -"CƹWADrakX |RtκϺж}ϰϤWeAӨMw@ǨƱ:\n" -"\n" -" * YO Windows }ϰϡA{N|ϥGRUB/LILO{[HNApAz" -"NiHϥ GRUB Ϊ̬O LILO }{ӱҰ Linux tΡAƦܬOiHҰʥt~@" -"@~t(蹳O Windows )C\n" -"\n" -" * pGb}ϰϤWwgF GRUB Ϊ̬O LILO }{A{N|ϥηs]w" -"л\ApGw˵{Lk۰ʳBzpA|ܥXUﶵC\n" -"\n" -" * \"nϥΨӶ}z{\": zTUإiH:\n" -"\n" -" * uGRUBv: pGzwϥ GRUB (oOrҦ})C\n" -"\n" -" * uϧο LILO v: pGzƱϥιϧΤƪ LILO }C\n" -"\n" -" * ur LILO v: pGzƱϥΤrҦ LILO }C\n" -"\n" -" * \"}˸m\" oӦaA@ӻiHΧA蹳O@\n" -"w˦bĤ@xw (/dev/hda) WAz]iHܧܡA蹳O\n" -"w˨ĤGxw (/dev/hdb)AƦܬOw˨n (/dev/fd0)\n" -"Oi檺C\n" -"\n" -" * \"bҰʧ@~tΫe𪺮ɶ\": ҰʹqɡA|Ȱ@|ɶMϥ" -"̿ܭnҰʨӶضi}C\n" -"\n" -"!! Ъ`NApGzyz⤣w˶}Ұʵ{ܡAzoTwzk" -"bUsҰʹqiJ Mandrake Linux tҡC]AAnܨo" -"Ӧw˶ثeAФT!!!\n" -"\n" -"ziHIyizsAzNhMaŨϥΪ̩ҨϥΪiﶵC\n" -"\n" -"Mandrake Linux w˵{N|}z{w˨tΤApzNzLoӶ}" -"z{Ұʱzq GNU/Linux ҡAƦܬOLwgw˩Ϊ@~t" -"ҡC\n" -"\n" -"w˵{ztΤwgwˤFL@~tΡAҰʸӧ@~tΪرN|۰" -"[J}椺Aå]tʷsW}ػPק}تe]wC\n" -"ziHbܥXiѿܶ}ؤWֳtI⦸ܧeƦܬORӱҰʶ;ϥ" -"ysWzӫإ߶}ؤe; MIyzHK~iUw˶ءC" - -#: ../../security/help.pm:1 -#, c-format -msgid "" -"if set, send the mail report to this email address else send it to root." -msgstr "" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Which configuration of XFree do you want to have?" -msgstr "znέ@ XFree ]w ?" - -#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "More" -msgstr "h" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"This uses the same syntax as the command line program 'cdrecord'. 'cdrecord -" -"scanbus' would also show you the device number." -msgstr "" - -#: ../../security/level.pm:1 -#, c-format -msgid "" -"With this security level, the use of this system as a server becomes " -"possible.\n" -"The security is now high enough to use the system as a server which can " -"accept\n" -"connections from many clients. Note: if your machine is only a client on the " -"Internet, you should choose a lower level." -msgstr "תwʬˬdP]wAAXѦb[]~AȪAϥΡC" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Server Name" -msgstr "AW١G" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Account Password" -msgstr "bKX" - -#: ../../standalone/drakhelp:1 -#, c-format -msgid "" -"%s cannot be displayed \n" -". No Help entry of this type\n" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "" -"You decided to install the bootloader on a partition.\n" -"This implies you already have a bootloader on the hard drive you boot (eg: " -"System Commander).\n" -"\n" -"On which drive are you booting?" -msgstr "" -"zTwnN}z{w˩ΰϤWC\n" -"oi|\쥻ΰϤW즳}z{\n" -"( System Commander)C\n" -"\n" -"zΨwж}OH" - -#: ../../install_interactive.pm:1 -#, fuzzy, c-format -msgid "" -"WARNING!\n" -"\n" -"DrakX will now resize your Windows partition. Be careful: this\n" -"operation is dangerous. If you have not already done so, you\n" -"first need to exit the installation, run \"chkdsk c:\" from a\n" -"Command Prompt under Windows (beware, running graphical program\n" -"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" -"Command Prompt!), optionally run defrag, then restart the\n" -"installation. You should also backup your data.\n" -"When sure, press Ok." -msgstr "" -"ĵi!\n" -"\n" -"DrakX {bnwz Windows ΰϪjpAФp!! \n" -"oӰʧ@OܦMIAХ}w˵{Ab Windows \n" -"U scandisk defrag HAӦw LinuxAӥB\n" -"̦nN Windows ΰϩUưnƥCTw\n" -"SDHA~yTwzsC" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Tajik keyboard" -msgstr "Tajik L" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"You can copy the printer configuration which you have done for the spooler %" -"s to %s, your current spooler. All the configuration data (printer name, " -"description, location, connection type, and default option settings) is " -"overtaken, but jobs will not be transferred.\n" -"Not all queues can be transferred due to the following reasons:\n" -msgstr "" -"YOzwg]wL %s spooler LتܡAziH²\n" -"NպA]weMε %s ءCMΪպAءA]tO\n" -"LW١ByzTBmBsuBw]ѼƵءA\n" -"L]tǰenCLu@إ\C\n" -"t~äOҦCLu@QǿLӡA]U]G\n" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Font List" -msgstr "rM" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"You may need to change your Open Firmware boot-device to\n" -" enable the bootloader. If you don't see the bootloader prompt at\n" -" reboot, hold down Command-Option-O-F at reboot and enter:\n" -" setenv boot-device %s,\\\\:tbxi\n" -" Then type: shut-down\n" -"At your next boot you should see the bootloader prompt." -msgstr "" -"z]\ݭnܱz Open Firmware W}˸m]wA\n" -"HK}Ҷ}Ұʵ{\CpGz}ɨèS}\n" -"}{TAs}ɫ Command-Option-O-FA\n" -"MJ: setenv boot-device %s,\\\\:tbxi\n" -"MAJ: shut-down\n" -"MAU@}ӴNiHݨ}Ұʵ{TFC" - -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "" -"You appear to have an OldWorld or Unknown\n" -" machine, the yaboot bootloader will not work for you.\n" -"The install will continue, but you'll\n" -" need to use BootX or some other means to boot your machine" -msgstr "" -"ztΦG OldWorld Ϊ̬OL{ѪءA\n" -"oN|ɭPyaboot }Ұʵ{Lk`B@C\n" -"w٬O|~UhALz]\ݭnϥ bootX \n" -"ӱҰʧAqC" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Select file" -msgstr "ɮ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Choose the network or host on which the local printers should be made " -"available:" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"These commands you can also use in the \"Printing command\" field of the " -"printing dialogs of many applications, but here do not supply the file name " -"because the file to print is provided by the application.\n" -msgstr "" -"oӫO\Az]iHb\hε{CLܤ \"CLRO\" ϥ" -"C\n" -"Oo䤣ѩҿתɮצW١A]ɮתCL\OѬε{ѡC\n" - -#: ../../lang.pm:1 -#, c-format -msgid "Japan" -msgstr "饻" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Print option list" -msgstr "CLﶵM" - -#: ../../standalone/localedrake:1 -#, c-format -msgid "The change is done, but to be effective you must logout" -msgstr "ܧwgALzݭnsnJ~ͮ" - -#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Country / Region" -msgstr "a/a" - -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Search servers" -msgstr "jMA" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "NCP queue name missing!" -msgstr "NCP CLCW٦W٨Sw" - -#: ../../standalone/net_monitor:1 -#, fuzzy, c-format -msgid "" -"Warning, another internet connection has been detected, maybe using your " -"network" -msgstr "ĵiAztΤwg{suA]\bszA" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Cd-Rom labeled \"%s\"" -msgstr "Ь \"%s\" Ф" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "CDRW media" -msgstr "" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Saves and restores system entropy pool for higher quality random\n" -"number generation." -msgstr "xsP^s~tζüƲ;" - -#: ../../share/advertising/07-server.pl:1 -#, c-format -msgid "Turn your computer into a reliable server" -msgstr "" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Check empty password in /etc/shadow" -msgstr "" - -#: ../../network/network.pm:1 -#, c-format -msgid " (driver %s)" -msgstr "(driver %s)" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"Loopback file(s):\n" -" %s\n" -msgstr "" -"¶^˸m (loopback) ɮ:\n" -" %s\n" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "I don't know" -msgstr "M" - -#: ../../services.pm:1 -#, c-format -msgid "Start when requested" -msgstr "" - -#: ../../printer/main.pm:1 -#, c-format -msgid ", TCP/IP host \"%s\", port %s" -msgstr "ATCP/IP D \"%s\"As %s" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "" -"You are about to configure an Auto Install floppy. This feature is somewhat " -"dangerous and must be used circumspectly.\n" -"\n" -"With that feature, you will be able to replay the installation you've " -"performed on this computer, being interactively prompted for some steps, in " -"order to change their values.\n" -"\n" -"For maximum safety, the partitioning and formatting will never be performed " -"automatically, whatever you chose during the install of this computer.\n" -"\n" -"Do you want to continue?" -msgstr "" -"ثedzƳ]w۰ʦw˺ϤCoӥ\IMIAϥΤWnܷVC\n" -"\n" -"oӥ\AzNܦ۰ʪbҭnw˪qW۰ʶiw˪\n" -"ʧ@AǨBJhUϥΪ̦ۤvʶi@Ǿާ@C\n" -"\n" -"F̦wҶqAҦΰϹHή榡ưʧ@N|۰ʶiC\n" -"\n" -"zƱ~ܡH" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Telugu" -msgstr "Tokelau" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "" -"\n" -"\n" -"Your card currently use the %s\"%s\" driver (default driver for your card is " -"\"%s\")" -msgstr "" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Post Uninstall" -msgstr "Ϧw˳]w" - -#: ../../standalone/net_monitor:1 -#, fuzzy, c-format -msgid "Connecting to Internet " -msgstr "su Internet" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid " (" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "Cpuid level" -msgstr "w" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "Novell server \"%s\", printer \"%s\"" -msgstr " Novell D \"%s\"AL \"%s\"" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Mongolian (cyrillic)" -msgstr "뺸 (cyrillic)" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Add a module" -msgstr "sWҲ" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Profile to delete:" -msgstr "nRӳ]wɡG" - -#: ../../standalone/net_monitor:1 -#, fuzzy, c-format -msgid "Local measure" -msgstr "KX" - -#: ../../network/network.pm:1 -#, c-format -msgid "Warning : IP address %s is usually reserved !" -msgstr "" - -#: ../../mouse.pm:1 -#, c-format -msgid "busmouse" -msgstr "busmouse" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Create Etherboot Enabled Boot Images:\n" -" \tTo boot a kernel via etherboot, a special kernel/initrd image must " -"be created.\n" -" \tmkinitrd-net does much of this work and drakTermServ is just a " -"graphical \n" -" \tinterface to help manage/customize these images. To create the " -"file \n" -" \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " -"include in \n" -" \tdhcpd.conf, you should create the etherboot images for at least " -"one full kernel." -msgstr "" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Account Login (user name)" -msgstr "nJb (ϥΪ̦W)" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Fdiv bug" -msgstr "" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "" -"drakfirewall configurator\n" -"\n" -"Make sure you have configured your Network/Internet access with\n" -"drakconnect before going any further." -msgstr "" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Accept broadcasted icmp echo" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Uruguay" -msgstr "Uruguay" - -#: ../../lang.pm:1 -#, c-format -msgid "Benin" -msgstr "Benin" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "SMB/Windows server \"%s\", share \"%s\"" -msgstr " Windows D \"%s\"AɦW \"%s\"" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Path selection" -msgstr "|" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Name/IP address of host:" -msgstr "" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Monitor: %s\n" -msgstr "ùG %s\n" - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Custom & system settings" -msgstr "ۭqϺФ" - -#: ../../partition_table/raw.pm:1 -#, fuzzy, c-format -msgid "" -"Something bad is happening on your drive. \n" -"A test to check the integrity of data has failed. \n" -"It means writing anything on the disk will end up with random, corrupted " -"data." -msgstr "" -"zwеoͤF@Y~A\n" -"wŪgJ˴ѤF...\n" -"oN۱zwЦ骺lDAsiೣ|oͿ~C" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer host name or IP missing!" -msgstr "SwLDW٩άOIP !" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Please check all users that you want to include in your backup." -msgstr "ˬdƱnƥҦϥΪ̶ءC" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "" -"The %s must be configured by printerdrake.\n" -"You can launch printerdrake from the Mandrake Control Center in Hardware " -"section." -msgstr "" -"ox %s yݭn printerdrake {i]wC\n" -"ziHzL Mandrake xw鶵ؤӵ{C" - -#: ../../lang.pm:1 -#, c-format -msgid "Bangladesh" -msgstr "Bangladesh" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Japan (cable)" -msgstr "饻 (cable)" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Initial tests" -msgstr "l" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "Continue" -msgstr "~" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Custom Restore" -msgstr "ۭq^s覡" - -# calendar/gui/dialogs/cal-prefs-dialog.glade.h:38 -# calendar/gui/event-editor.c:480 -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Saturday" -msgstr "P" - -#: ../../help.pm:1 -#, c-format -msgid "" -"\"%s\": if a sound card is detected on your system, it is displayed here.\n" -"If you notice the sound card displayed is not the one that is actually\n" -"present on your system, you can click on the button and choose another\n" -"driver." -msgstr "" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "Set the root umask." -msgstr "SKX" - -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Script-based" -msgstr "Script-based" - -#: ../../install_any.pm:1 ../../partition_table.pm:1 -#, c-format -msgid "Error reading file %s" -msgstr "Ūɮ %s ɵoͿ~" - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "PLL setting:" -msgstr "PLL ]wG" - -#: ../../install_interactive.pm:1 ../../install_steps.pm:1 -#, c-format -msgid "You must have a FAT partition mounted in /boot/efi" -msgstr "z@ӱ /boot/efi FAT ΰ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid " on " -msgstr "" - -#: ../../diskdrake/dav.pm:1 -#, c-format -msgid "The URL must begin with http:// or https://" -msgstr "URL 榡 http:// άO https:// " - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"You can specify directly the URI to access the printer. The URI must fulfill " -"either the CUPS or the Foomatic specifications. Note that not all URI types " -"are supported by all the spoolers." -msgstr "" -"ziHϥ URI 覡sӦLCURI J\n" -"CUPSAҦb}AΪ̬O Foomatic W覡JC\n" -"Ъ`NAäOҦ URI QҦ spooler 䴩C" - -#: ../../any.pm:1 -#, c-format -msgid "Other OS (SunOS...)" -msgstr "L@~t (SunOS...)" - -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "Install/Upgrade" -msgstr "w/ɯ" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "%d packages" -msgstr "%d ӮM" - -#: ../../crypto.pm:1 ../../lang.pm:1 -#, c-format -msgid "Costa Rica" -msgstr "j[" - -#: ../../standalone.pm:1 -#, c-format -msgid "" -"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" -"Backup and Restore application\n" -"\n" -"--default : save default directories.\n" -"--debug : show all debug messages.\n" -"--show-conf : list of files or directories to backup.\n" -"--config-info : explain configuration file options (for non-X " -"users).\n" -"--daemon : use daemon configuration. \n" -"--help : show this message.\n" -"--version : show version number.\n" -msgstr "" - -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Domain Authentication Required" -msgstr "ݭn Domain {" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -"\n" -"\n" -" Thanks:\n" -"\t- LTSP Project http://www.ltsp.org\n" -"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n" -"\n" -msgstr "" - -#: ../../security/level.pm:1 -#, c-format -msgid "Use libsafe for servers" -msgstr "ҥΡulibsafev@\" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Icelandic" -msgstr "Bq" - -#: ../../standalone.pm:1 -#, c-format -msgid "" -"\n" -"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" -"testing] [-v|--version] " -msgstr "" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "" -"Maximum size\n" -" allowed for Drakbackup (MB)" -msgstr "пJƥ\̤jjp" - -#: ../../loopback.pm:1 -#, c-format -msgid "Circular mounts %s\n" -msgstr "%s Q`\n" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Lilo/grub mode" -msgstr "Lilo/grub Ҧ" - -#: ../../lang.pm:1 -#, c-format -msgid "Martinique" -msgstr "Martinique" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "HardDrive / NFS" -msgstr "w / NFS" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Old user list:\n" -msgstr "" -"\n" -"- ϥΪɮ:\n" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Search Backups" -msgstr "" - -#: ../../modules/parameters.pm:1 -#, c-format -msgid "a number" -msgstr "@ӼƦr" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Swedish" -msgstr "" - -#. -PO: the %s is the driver type (scsi, network, sound,...) -#: ../../modules/interactive.pm:1 -#, c-format -msgid "Which %s driver should I try?" -msgstr "Ӹը %s Xʵ{OH" - -#: ../../standalone/logdrake:1 -#, fuzzy, c-format -msgid "" -"You will receive an alert if one of the selected services is no longer " -"running" -msgstr "YOzҿAȶحYOS檺ܡAzN|ĵܳq" - -# calendar/gui/dialogs/cal-prefs-dialog.glade.h:55 -# calendar/gui/event-editor.c:477 -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Weekday" -msgstr "PT" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Filesystem types:" -msgstr "ɮרtή榡G" - -#: ../../lang.pm:1 -#, c-format -msgid "Northern Mariana Islands" -msgstr "Northern Mariana Islands" - -#: ../../printer/main.pm:1 -#, c-format -msgid ", multi-function device on HP JetDirect" -msgstr "HP JetDirect Wh\˸m" - -#: ../../mouse.pm:1 -#, c-format -msgid "none" -msgstr "L" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "" -"Name of the profile to create (the new profile is created as a copy of the " -"current one) :" -msgstr "nإߪ]wɦW (s]wɷ|ѥثe]wɽƻseL)G" - -#: ../../harddrake/data.pm:1 -#, fuzzy, c-format -msgid "Floppy" -msgstr "}" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Ghostscript referencing" -msgstr "" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Bootloader" -msgstr "Ұʤ" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Authorize all services controlled by tcp_wrappers" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Move" -msgstr "" - -#: ../../any.pm:1 ../../help.pm:1 -#, c-format -msgid "Bootloader to use" -msgstr "nϥΨӶ}{" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "SMB server host" -msgstr "ڥDW١" - -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "Name Servers:" -msgstr "Samba A" - -# executive-summary/test-service/rdf-summary.c:806 -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Minute" -msgstr "" - -#: ../../install_messages.pm:1 -#, c-format -msgid "" -"\n" -"Warning\n" -"\n" -"Please read carefully the terms below. If you disagree with any\n" -"portion, you are not allowed to install the next CD media. Press 'Refuse' \n" -"to continue the installation without using these media.\n" -"\n" -"\n" -"Some components contained in the next CD media are not governed\n" -"by the GPL License or similar agreements. Each such component is then\n" -"governed by the terms and conditions of its own specific license. \n" -"Please read carefully and comply with such specific licenses before \n" -"you use or redistribute the said components. \n" -"Such licenses will in general prevent the transfer, duplication \n" -"(except for backup purposes), redistribution, reverse engineering, \n" -"de-assembly, de-compilation or modification of the component. \n" -"Any breach of agreement will immediately terminate your rights under \n" -"the specific license. Unless the specific license terms grant you such\n" -"rights, you usually cannot install the programs on more than one\n" -"system, or adapt it to be used on a network. In doubt, please contact \n" -"directly the distributor or editor of the component. \n" -"Transfer to third parties or copying of such components including the \n" -"documentation is usually forbidden.\n" -"\n" -"\n" -"All rights to the components of the next CD media belong to their \n" -"respective authors and are protected by intellectual property and \n" -"copyright laws applicable to software programs.\n" -msgstr "" -"\n" -"Warning\n" -"\n" -"Please read carefully the terms below. If you disagree with any\n" -"portion, you are not allowed to install the next CD media. Press 'Refuse' \n" -"to continue the installation without using these media.\n" -"\n" -"\n" -"Some components contained in the next CD media are not governed\n" -"by the GPL License or similar agreements. Each such component is then\n" -"governed by the terms and conditions of its own specific license. \n" -"Please read carefully and comply with such specific licenses before \n" -"you use or redistribute the said components. \n" -"Such licenses will in general prevent the transfer, duplication \n" -"(except for backup purposes), redistribution, reverse engineering, \n" -"de-assembly, de-compilation or modification of the component. \n" -"Any breach of agreement will immediately terminate your rights under \n" -"the specific license. Unless the specific license terms grant you such\n" -"rights, you usually cannot install the programs on more than one\n" -"system, or adapt it to be used on a network. In doubt, please contact \n" -"directly the distributor or editor of the component. \n" -"Transfer to third parties or copying of such components including the \n" -"documentation is usually forbidden.\n" -"\n" -"\n" -"All rights to the components of the next CD media belong to their \n" -"respective authors and are protected by intellectual property and \n" -"copyright laws applicable to software programs.\n" - -#: ../../standalone/printerdrake:1 -#, c-format -msgid "/_Expert mode" -msgstr "MaҦ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" -msgstr " Star Office/OpenOffice.org/GIMP L" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Linux Virtual Server, used to build a high-performance and highly\n" -"available server." -msgstr "Linux Virtual Server, ΨӬ[]@ӰįPIJv LVS AC" - -#: ../../lang.pm:1 -#, c-format -msgid "Micronesia" -msgstr "Micronesia" - -#: ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "4 billion colors (32 bits)" -msgstr "4 (32 줸)" - -#: ../../steps.pm:1 -#, c-format -msgid "License" -msgstr "v" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "This may take a moment to generate the keys." -msgstr ";ɮסAеy...C" - -#: ../../standalone/draksec:1 -#, c-format -msgid "" -"Here, you can setup the security level and administrator of your machine.\n" -"\n" -"\n" -"The Security Administrator is the one who will receive security alerts if " -"the\n" -"'Security Alerts' option is set. It can be a username or an email.\n" -"\n" -"\n" -"The Security Level menu allows you to select one of the six preconfigured " -"security levels\n" -"provided with msec. These levels range from poor security and ease of use, " -"to\n" -"paranoid config, suitable for very sensitive server applications:\n" -"\n" -"\n" -"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but " -"very\n" -"easy to use security level. It should only be used for machines not " -"connected to\n" -"any network and that are not accessible to everybody.\n" -"\n" -"\n" -"<span foreground=\"royalblue3\">Standard</span>: This is the standard " -"security\n" -"recommended for a computer that will be used to connect to the Internet as " -"a\n" -"client.\n" -"\n" -"\n" -"<span foreground=\"royalblue3\">High</span>: There are already some\n" -"restrictions, and more automatic checks are run every night.\n" -"\n" -"\n" -"<span foreground=\"royalblue3\">Higher</span>: The security is now high " -"enough\n" -"to use the system as a server which can accept connections from many " -"clients. If\n" -"your machine is only a client on the Internet, you should choose a lower " -"level.\n" -"\n" -"\n" -"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the " -"previous\n" -"level, but the system is entirely closed and security features are at their\n" -"maximum" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" -msgstr "L۰ʰ (BTCP/Socket P SMB L)" - -#: ../../network/adsl.pm:1 -#, c-format -msgid "Sagem (using pppoa) usb" -msgstr "" - -#: ../../install_any.pm:1 -#, c-format -msgid "" -"An error occurred - no valid devices were found on which to create new " -"filesystems. Please check your hardware for the cause of this problem" -msgstr "" -"oͤF@ӿ~ - 䤣iΪ˸miHΨӫإ߷sɮרtΡAˬdzw" -"pHXD" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Starting the printing system at boot time" -msgstr "}ɱҰʦCLAȨt" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Do you want to start the connection at boot?" -msgstr "znb}ɦ۰ʱҰʸӳsuܡH" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Processor ID" -msgstr "" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "Sound trouble shooting" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Polish (qwerty layout)" -msgstr "i (qwerty tm)" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "/_Add Printer" -msgstr "L" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"Drakbackup activities via CD:\n" -"\n" -msgstr "" -"\n" -"Drakbackup ϥ CD 覡iBzG\n" -"\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"You are about to install the printing system %s on a system running in the %" -"s security level.\n" -"\n" -"This printing system runs a daemon (background process) which waits for " -"print jobs and handles them. This daemon is also accessable by remote " -"machines through the network and so it is a possible point for attacks. " -"Therefore only a few selected daemons are started by default in this " -"security level.\n" -"\n" -"Do you really want to configure printing on this machine?" -msgstr "" -"zثedzƦbu%svwŪҦw˨Ӧwˡu%sz\n" -"oӦCLtζءC\n" -"\n" -"oӦCLAȶءA{N|bB@AHK\n" -"ѬL\C~ACLAȡA]gѺ\n" -"覡isAҥHYӼhӻoiQMIC\n" -"]AboӦwҤUANuֳAȵ{w]\n" -"|b}ɱҰʡC\n" -"\n" -"zTwn}l]woxWCLس]wܡH" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Host \"%s\", port %s" -msgstr "D \"%s\"As %s" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "This partition can't be used for loopback" -msgstr "oӤΰϤΨӧ@ loopback ˸m" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "File already exists. Use it?" -msgstr "ɮפwgsbFAnϥγoɮ?" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "received: " -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Right Alt key" -msgstr "k Alt " - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "the list of alternative drivers for this sound card" -msgstr "iѱzĥdB~iܪXʵ{M" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Gateway" -msgstr "hD" - -#: ../../lang.pm:1 -#, c-format -msgid "Tonga" -msgstr "Tonga" - -#: ../../lang.pm:1 -#, c-format -msgid "Tunisia" -msgstr "Tunisia" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Scanner sharing" -msgstr "ɮפ" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Profile: " -msgstr "]wɡG" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "" -"Click on a device in the left tree in order to display its information here." -msgstr "" - -#: ../../security/help.pm:1 -#, c-format -msgid "Allow/Forbid autologin." -msgstr "" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "XawTV isn't installed!" -msgstr "XawTV {åwˡI" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Do not include critical files (passwd, group, fstab)" -msgstr "n]tnɮ (passwdBgroupBfstab)" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "old static device name used in dev package" -msgstr "dev MҨϥΪ¦˸mW" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Enable the logging of IPv4 strange packets" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "This label is already used" -msgstr "oӼҤwgιLF" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"Welcome to the Printer Setup Wizard\n" -"\n" -"This wizard will help you to install your printer(s) connected to this " -"computer or connected directly to the network.\n" -"\n" -"If you have printer(s) connected to this machine, Please plug it/them in on " -"this computer and turn it/them on so that it/they can be auto-detected. Also " -"your network printer(s) must be connected and turned on.\n" -"\n" -"Note that auto-detecting printers on the network takes longer than the auto-" -"detection of only the printers connected to this machine. So turn off the " -"auto-detection of network printers when you don't need it.\n" -"\n" -" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " -"to set up your printer(s) now." -msgstr "" -"\n" -"wӨL]wF\n" -"\n" -"Uӳ]wFN|ɱzL]wA]tLHλݺL" -"C\n" -"YOzn]wLOw˦bAWAХT{AuwTAq" -"åBwg}ҡAHK۰ʰALCYOznϥΪOLA" -"нT{ӦLq]OB}ҪAAӥBPTsqC\n" -"\n" -"Ъ`NA۰ʰL\AΩLpAYOAnϥΪOL" -"Aq`Aݭn۰ʰ\C\n" -"\n" -"AT{SDOAIuU@BvAΪ̬OIuv]wC" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Greek (polytonic)" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "After formatting partition %s, all data on this partition will be lost" -msgstr "bΰ %s i榡ƪʧ@HAҦboӤΰϤWƳ|QM" - -#: ../../standalone/net_monitor:1 -#, fuzzy, c-format -msgid "Connection Time: " -msgstr "suءG " - -#: ../../standalone/livedrake:1 -#, c-format -msgid "" -"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" -"If you don't have it, press Cancel to avoid live upgrade." -msgstr "" -"ЩJw CD ФAMUyTwzs~wˡCpGzèSo\n" -"ФܡAЫUsHקKҰʽuWɯŪ{C" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Use group id for execution" -msgstr "ɥt~ƸӸsv" - -#: ../../any.pm:1 -#, c-format -msgid "Choose the default user:" -msgstr "пw]ϥΪ̡G" - -#: ../../lang.pm:1 -#, c-format -msgid "Gabon" -msgstr "Gabon" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "" -"\n" -"Printers on remote CUPS servers do not need to be configured here; these " -"printers will be automatically detected." -msgstr "" -"\n" -"z Printer CUPS AȥDWAҥHzoäݭn]wF\n" -"oǦLN۰ʰC" - -#: ../../any.pm:1 -#, c-format -msgid "" -"Mandrake Linux can support multiple languages. Select\n" -"the languages you would like to install. They will be available\n" -"when your installation is complete and you restart your system." -msgstr "ziHܦbw˧HϥΨLy" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Directory (or module) to put the backup on this host." -msgstr "пJnƥӥDҦbؿW" - -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Domain" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Precise RAM size if needed (found %d MB)" -msgstr "ݭnܡAJTOjp ( %d MB)" - -#: ../../help.pm:1 -#, c-format -msgid "" -"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" -"automated. DrakX will analyze the disk boot sector and act according to\n" -"what it finds there:\n" -"\n" -" * if a Windows boot sector is found, it will replace it with a grub/LILO\n" -"boot sector. This way you will be able to load either GNU/Linux or another\n" -"OS.\n" -"\n" -" * if a grub or LILO boot sector is found, it will replace it with a new\n" -"one.\n" -"\n" -"If it cannot make a determination, DrakX will ask you where to place the\n" -"bootloader." -msgstr "" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Provider dns 2 (optional)" -msgstr "ISP ĤGx dns (iοJ)" - -#: ../../any.pm:1 ../../help.pm:1 -#, c-format -msgid "Boot device" -msgstr "}˸m" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Which partition do you want to resize?" -msgstr "znqs]wӤΰϪjp ?" - -#: ../../lang.pm:1 -#, c-format -msgid "United States Minor Outlying Islands" -msgstr "United States Minor Outlying Islands" - -#: ../../lang.pm:1 -#, c-format -msgid "Djibouti" -msgstr "Djibouti" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "A tool to monitor your logs" -msgstr "ʹOɪu" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "detected on port %s" -msgstr " port %s " - -#: ../../printer/data.pm:1 -#, c-format -msgid "LPD" -msgstr "LPD" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Graphics card: %s\n" -msgstr "ܥdG %s\n" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "/Set as _Default" -msgstr " (w]})" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Accept icmp echo" -msgstr "" - -#: ../../bootloader.pm:1 -#, c-format -msgid "Yaboot" -msgstr "Yaboot" - -#: ../../mouse.pm:1 -#, fuzzy, c-format -msgid "Logitech CC Series with Wheel emulation" -msgstr "Logitech CC Series" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Splash selection" -msgstr "e" - -#: ../../partition_table.pm:1 -#, c-format -msgid "Extended partition not supported on this platform" -msgstr "oӥxä䴩ΰ" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "ISDN Configuration" -msgstr "ISDN ]w" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "high" -msgstr "" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Internet Connection Sharing" -msgstr "Internet su" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Choose file" -msgstr "ɮ" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Summary: " -msgstr "`" - -#: ../../network/shorewall.pm:1 -#, c-format -msgid "" -"Warning! An existing firewalling configuration has been detected. You may " -"need some manual fixes after installation." -msgstr "" -"ĵi ! {wgsbպA]wC\n" -"zӦbwˤʭץ@ǥn]wءC" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printing/Photo Card Access on \"%s\"" -msgstr "" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Daily security check" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Do you want to enable printing on the printers mentioned above or on " -"printers in the local network?\n" -msgstr "znҤWΦLCLAȡAΪ̬OϥΤLܡH\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer default settings" -msgstr "L" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "" -"the WP flag in the CR0 register of the cpu enforce write proctection at the " -"memory page level, thus enabling the processor to prevent unchecked kernel " -"accesses to user memory (aka this is a bug guard)" -msgstr "" - -#: ../../mouse.pm:1 -#, c-format -msgid "Generic PS2 Wheel Mouse" -msgstr "@ PS/2 Wheel ƹ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Removing old printer \"%s\"..." -msgstr "bR¦L \"%s\" ..." - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "Select a device !" -msgstr "zy" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Remove selected server" -msgstr "" - -#: ../../network/adsl.pm:1 -#, c-format -msgid "Sagem (using dhcp) usb" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "French Southern Territories" -msgstr "French Southern Territories" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "the vendor name of the processor" -msgstr "˸mtӦW" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Maintain %s:\n" -" \tFor users to be able to log into the system from a diskless " -"client, their entry in\n" -" \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" -" \thelps in this respect by adding or removing system users from this " -"file." -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "All data on this partition should be backed-up" -msgstr "ҦboӤΰϤWƳӥgLƥ" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Installing package %s" -msgstr "bw %s M" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Checking device and configuring HPOJ..." -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"To have more partitions, please delete one to be able to create an extended " -"partition" -msgstr "ݭnhΰϪܡAЧR@ӥDΰϥHإߩΰ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Your printer was configured automatically to give you access to the photo " -"card drives from your PC. Now you can access your photo cards using the " -"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " -"\"MTools File Manager\") or the command line utilities \"mtools\" (enter " -"\"man mtools\" on the command line for more info). You find the card's file " -"system under the drive letter \"p:\", or subsequent drive letters when you " -"have more than one HP printer with photo card drives. In \"MtoolsFM\" you " -"can switch between drive letters with the field at the upper-right corners " -"of the file lists." -msgstr "" - -#: ../../steps.pm:1 -#, c-format -msgid "Choose packages to install" -msgstr "{M" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "ALL existing partitions and their data will be lost on drive %s" -msgstr "Ҧb %s ϺФWΰϸƳ|QM" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"Your system does not have enough space left for installation or upgrade (%d " -"> %d)" -msgstr "ztΨSŶiHΨӦw˩ΤɯŤF (%d > %d)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Every printer needs a name (for example \"printer\"). The Description and " -"Location fields do not need to be filled in. They are comments for the users." -msgstr "" -"C@ӦLݭnw@ӦW (蹳O printer)C\n" -"ܩyzPmiHJA]oOѡC" - -#: ../../help.pm:1 -#, c-format -msgid "" -"\"%s\": clicking on the \"%s\" button will open the printer configuration\n" -"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" -"information on how to setup a new printer. The interface presented there is\n" -"similar to the one used during installation." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Bhutan" -msgstr "Bhutan" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Network interface" -msgstr "" - -#: ../../standalone/net_monitor:1 -#, fuzzy, c-format -msgid "Disconnection from Internet failed." -msgstr "su Internet" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Reading printer data..." -msgstr "ŪL ..." - -#: ../../keyboard.pm:1 -#, c-format -msgid "Korean keyboard" -msgstr "L" - -#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 -#, c-format -msgid "Not connected" -msgstr "|su" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Greek" -msgstr "þ" - -#: ../../lang.pm:1 -#, c-format -msgid "Saint Kitts and Nevis" -msgstr "Saint Kitts and Nevis" - -#: ../../mouse.pm:1 -#, c-format -msgid "Generic 3 Button Mouse with Wheel emulation" -msgstr "@몺T䦡ƹ" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Transfer successful\n" -"You may want to verify you can login to the server with:\n" -"\n" -"ssh -i %s %s\\@%s\n" -"\n" -"without being prompted for a password." -msgstr "" -"ǿwg\n" -"z]\ݭnT{zϥΤUOnJtΡG\n" -"\n" -"ssh -i %s %s\\@%s\n" -"\n" -"oӤݭnJKXNiHnJC" - -#: ../../any.pm:1 -#, c-format -msgid "Enable OF Boot?" -msgstr "\ OF } H" - -#: ../../fsedit.pm:1 -#, c-format -msgid "You can't use JFS for partitions smaller than 16MB" -msgstr "p 16MB ΰϤ] JFS 榡" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Erase your RW media (1st Session)" -msgstr "pGznMŪgC˸mW (1st Session)AпӶ" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Monitor VertRefresh: %s\n" -msgstr "ùsWvG %s\n" - -#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 -#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Mount point" -msgstr "I" - -#: ../../Xconfig/test.pm:1 -#, c-format -msgid "" -"An error occurred:\n" -"%s\n" -"Try to change some parameters" -msgstr "" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "TCP/IP host \"%s\", port %s" -msgstr "ATCP/IP D \"%s\"As %s" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "User :" -msgstr "ϥΪ̡G" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore system" -msgstr "^st" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "" -"These are the machines on which the locally connected scanner(s) should be " -"available:" -msgstr "" - -#: ../../standalone/drakpxe:1 -#, fuzzy, c-format -msgid "The DHCP end ip" -msgstr "DHCP d" - -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Another one" -msgstr "t~@" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Drakbackup" -msgstr "Drakbackup" - -#: ../../lang.pm:1 -#, c-format -msgid "Colombia" -msgstr "Colombia" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"Current configuration of `%s':\n" -"\n" -"Network: %s\n" -"IP address: %s\n" -"IP attribution: %s\n" -"Driver: %s" -msgstr "" -"ثe '%s' պA]w:\n" -"\n" -": %s\n" -"IP }G %s\n" -"IP ݩʡG%s\n" -"Xʵ{G %s" - -#: ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Plug'n Play" -msgstr "HY" - -#: ../../lang.pm:1 -#, c-format -msgid "Reunion" -msgstr "Reunion" - -#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Details" -msgstr "ԲӸT" - -#: ../../network/tools.pm:1 -#, c-format -msgid "For security reasons, it will be disconnected now." -msgstr "]w]ҶqA{bN|_suC" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Synchronization tool" -msgstr "PBu" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Checking your system..." -msgstr "bˬdzt..." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Print" -msgstr "CL" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Insert the tape with volume label %s\n" -" in the tape drive device %s" -msgstr "" -"иmJҦW٬ %s ϱa\n" -" %s ϱa" - -#: ../../lang.pm:1 -#, c-format -msgid "Mongolia" -msgstr "Mongolia" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Mounted\n" -msgstr "w\n" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Configure CUPS" -msgstr "]w X " - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "Graphical Interface" -msgstr "}ɱҰ X " - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore Users" -msgstr "^sϥΪɮ" - -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "Encryption key for %s" -msgstr "[K_" - -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "Do you want to recover your system?" -msgstr "znϥ aboot ?" - -#: ../../services.pm:1 -#, c-format -msgid "" -"The portmapper manages RPC connections, which are used by\n" -"protocols such as NFS and NIS. The portmap server must be running on " -"machines\n" -"which act as servers for protocols which make use of the RPC mechanism." -msgstr "" -"portmapper {zF RPC suA@Ω NFS P NIS qTwC\n" -"YOztέnϥΨ RPC AȡAzNҰʥC" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Detected hardware" -msgstr "ww" - -#: ../../lang.pm:1 -#, c-format -msgid "Mauritius" -msgstr "Mauritius" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Myanmar (Burmese)" -msgstr "Xjy (qly)" - -#: ../../fs.pm:1 -#, fuzzy, c-format -msgid "Enabling swap partition %s" -msgstr "b榡Ƥΰ %s" - -#: ../../install_interactive.pm:1 -#, fuzzy, c-format -msgid "There is no FAT partition to use as loopback (or not enough space left)" -msgstr "SiΪ FAT ΰϯվjpAΪ̬OӤΰϨSŶ" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Armenian (old)" -msgstr "Ȭ (old)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"A printer named \"%s\" already exists under %s. \n" -"Click \"Transfer\" to overwrite it.\n" -"You can also type a new name or skip this printer." -msgstr "" -"b %s wgsbF@ӦW٬ %s LW١C\n" -"Iyǰezл\eC\n" -"z]iHt~J@ӦW١AΪ̬OLoxLC" - -#: ../../share/advertising/12-mdkexpert.pl:1 -#, c-format -msgid "" -"Find the solutions of your problems via MandrakeSoft's online support " -"platform." -msgstr "" -"z Linux ðݡA]tѨMתݨDAiHzL\n" -"MandrakeSoft uW䴩xoi@B䴩C" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid ", host \"%s\", port %s" -msgstr "AD \"%s\"As %s" - -#: ../../lang.pm:1 -#, c-format -msgid "Monaco" -msgstr "Monaco" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Partitioning failed: %s" -msgstr "wФΥѡG %s" - -#: ../../fs.pm:1 ../../swap.pm:1 -#, c-format -msgid "%s formatting of %s failed" -msgstr "H %s 榡 %s " - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Canada (cable)" -msgstr "[j (cable)" - -#: ../../standalone/drakfloppy:1 -#, fuzzy, c-format -msgid "Floppy creation completed" -msgstr "sut" - -#: ../../help.pm:1 -#, c-format -msgid "Upgrade" -msgstr "ɯ" - -#: ../../help.pm:1 -#, c-format -msgid "Workstation" -msgstr "u@x" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"Installing package %s\n" -"%d%%" -msgstr "" -"bw %s M\n" -"%d%%" - -#: ../../lang.pm:1 -#, c-format -msgid "Kyrgyzstan" -msgstr "Kyrgyzstan" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "Multi-function device on USB" -msgstr "A USB h\˸m" - -#: ../../help.pm:1 -#, c-format -msgid "With basic documentation" -msgstr "]t (ij)" - -#: ../../services.pm:1 -#, c-format -msgid "Anacron is a periodic command scheduler." -msgstr "ѶgʪROƵ{{" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "" -"You must have a root partition.\n" -"For this, create a partition (or click on an existing one).\n" -"Then choose action ``Mount point'' and set it to `/'" -msgstr "" -"z@wonw@ӤΰϨөڥؿAnioӤu@\n" -"ܡAЫإߤ@Ӥΰ (ο@Ӥwgsbΰ)A\n" -"ۿ \"I\" oӾާ@AⱾI] `/'C" - -#: ../../lang.pm:1 -#, c-format -msgid "Western Sahara" -msgstr "Western Sahara" - -#: ../../network/network.pm:1 -#, c-format -msgid "Proxy should be http://..." -msgstr "NzA]w榡 http://..." - -#: ../../lang.pm:1 ../../standalone/drakxtv:1 -#, c-format -msgid "South Africa" -msgstr "nD" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Eject tape after the backup" -msgstr "ϥκϱaiƥ" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Etherboot Floppy/ISO" -msgstr "} Floppy/ISO" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Modify printer configuration" -msgstr "קL]w" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Choose a partition" -msgstr "ܤΰ" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Edit current rule" -msgstr "sثeWh" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "%s" -msgstr "" - -#: ../../mouse.pm:1 -#, c-format -msgid "Please test the mouse" -msgstr "дշƹ" - -#: ../../fs.pm:1 -#, c-format -msgid "" -"Do not update inode access times on this file system\n" -"(e.g, for faster access on the news spool to speed up news servers)." -msgstr "" - -#: ../../mouse.pm:1 -#, fuzzy, c-format -msgid "3 buttons with Wheel emulation" -msgstr "" - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Sticky-bit" -msgstr "Sticky-Bit" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Other Media" -msgstr "L˸m" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup system files" -msgstr "ƥtɮ" - -#: ../../mouse.pm:1 -#, c-format -msgid "Logitech MouseMan+" -msgstr "Logitech MouseMan+" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Sector" -msgstr "ϰ" - -#: ../../lang.pm:1 -#, c-format -msgid "Qatar" -msgstr "Qatar" - -#: ../../any.pm:1 -#, c-format -msgid "LDAP Base dn" -msgstr "LDAP dn " - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "" -"You can't select this package as there is not enough space left to install it" -msgstr "]wЪŶAziHoӮMC" - -#: ../../help.pm:1 -#, c-format -msgid "generate auto-install floppy" -msgstr "s@۰ʦw˺Ϥ" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Dialing mode" -msgstr "Ҧ" - -#: ../../services.pm:1 -#, c-format -msgid "File sharing" -msgstr "ɮפ" - -#: ../../any.pm:1 -#, c-format -msgid "Clean /tmp at each boot" -msgstr "C}ɦ۰ʲMz /tmp ؿȦs" - -#: ../../lang.pm:1 -#, c-format -msgid "Malawi" -msgstr "Malawi" - -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "local config: false" -msgstr "KX" - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "System settings" -msgstr "ۭqϺФ" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Please choose your type of mouse." -msgstr "пƹΦC" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "class of hardware device" -msgstr "w˸mO" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"These are the machines and networks on which the locally connected printer" -"(s) should be available:" -msgstr "" - -#: ../../lang.pm:1 ../../network/tools.pm:1 -#, c-format -msgid "United Kingdom" -msgstr "^" - -#: ../../services.pm:1 -#, c-format -msgid "running" -msgstr "椤" - -#: ../../lang.pm:1 -#, c-format -msgid "Indonesia" -msgstr "Lץ" - -#: ../../standalone/draksec:1 -#, c-format -msgid "default" -msgstr "w]" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "France [SECAM]" -msgstr "k [SECAM]" - -#: ../../any.pm:1 -#, c-format -msgid "restrict" -msgstr "Ѽ" - -#: ../../pkgs.pm:1 -#, c-format -msgid "must have" -msgstr "ƪ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"CUPS does not support printers on Novell servers or printers sending the " -"data into a free-formed command.\n" -msgstr "" -"CUPS ثeä䴩NovellDWLA]tϥfree-formed\n" -"ROǰeCLƪLC\n" - -#: ../../lang.pm:1 -#, c-format -msgid "Senegal" -msgstr "Senegal" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Command line" -msgstr "W" - -#: ../../share/advertising/08-store.pl:1 -#, c-format -msgid "" -"Our full range of Linux solutions, as well as special offers on products and " -"other \"goodies\", are available on our e-store:" -msgstr "" -"Mandrake ѤF㪺 Linux ѨMסAåB]tڭ̦Uӫ~A\n" -"ziHWsڭ̴ѪuWqlөìoi@BTC" - -# calendar/gui/goto-dialog.glade.h:10 -#: ../../standalone/drakbackup:1 -#, c-format -msgid "March" -msgstr "3" - -#: ../../any.pm:1 -#, c-format -msgid "access to administrative files" -msgstr "stέ]w" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Error during sendmail.\n" -" Your report mail was not sent.\n" -" Please configure sendmail" -msgstr "" -" sendmail {ɵoͿ~\n" -" ѩӿ~AƥɮױNLkeX\n" -" ˵ztΪ sendmail O_~C" - -#: ../../fs.pm:1 -#, c-format -msgid "" -"Do not allow set-user-identifier or set-group-identifier\n" -"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" -"have suidperl(1) installed.)" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Montserrat" -msgstr "Montserrat" - -#: ../../help.pm:1 -#, c-format -msgid "Automatic dependencies" -msgstr "" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Swap" -msgstr "Swap" - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Custom settings" -msgstr "ۭqϺФ" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore Other" -msgstr "^sLɮ" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "TV card" -msgstr "qd" - -#: ../../printer/main.pm:1 -#, c-format -msgid "Printer on SMB/Windows 95/98/NT server" -msgstr "SMB/Windows 95/98/NT AL" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "/_Configure CUPS" -msgstr "]w X " - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid ", " -msgstr ", " - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Submit lspci" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Remove selected host/network" -msgstr "" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Postfix is a Mail Transport Agent, which is the program that moves mail from " -"one machine to another." -msgstr "Postfix O@ӶlǰeNz{AΨӧ뻼H SMTP AȡC" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Uzbek (cyrillic)" -msgstr "뺸 (cyrillic)" - -#: ../../keyboard.pm:1 -#, c-format -msgid "" -"Here you can choose the key or key combination that will \n" -"allow switching between the different keyboard layouts\n" -"(eg: latin and non latin)" -msgstr "пܼAHKֳtPLtm" - -#: ../../network/network.pm:1 -#, fuzzy, c-format -msgid "Network Hotplugging" -msgstr "]w" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, reports check result to tty." -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore From CD" -msgstr "ϥΥФ^s" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"You are about to configure your computer to share its Internet connection.\n" -"With that feature, other computers on your local network will be able to use " -"this computer's Internet connection.\n" -"\n" -"Make sure you have configured your Network/Internet access using drakconnect " -"before going any further.\n" -"\n" -"Note: you need a dedicated Network Adapter to set up a Local Area Network " -"(LAN)." -msgstr "" -"ثeniInternetsuɪ]wAoӥ\\n" -"LϰqzLoxDWe\n" -"sW InternetCЪ`N: zݭnt~@idHK\n" -"ѰϰqsusɨϥΡC" - -#: ../../network/ethernet.pm:1 -#, c-format -msgid "" -"Please choose which network adapter you want to use to connect to Internet." -msgstr "пܱznΨӳsW Internet d" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Photo memory card access on your HP multi-function device" -msgstr "" - -#: ../../share/advertising/09-mdksecure.pl:1 -#, c-format -msgid "" -"Enhance your computer performance with the help of a selection of partners " -"offering professional solutions compatible with Mandrake Linux" -msgstr "" -"MandrakeSoft ѤFM~NHΧƪ~ѨMסA\n" -"wz[Jڭ̡Ct~ziHzLڭ̪ MandrakeStore\n" -"xoPڭ̦X@٦TC" - -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Authors: " -msgstr "" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Internet Connection Sharing is now disabled." -msgstr "Internet su@ɥثeFC" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, verify checksum of the suid/sgid files." -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Latin American" -msgstr "ԤBw" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Japanese text printing mode" -msgstr "ܧCLt" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Old device file" -msgstr "ª˸mɮ" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Info: " -msgstr "TG " - -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "Button `%s': %s" -msgstr "s `%s'G %s" - -#: ../../any.pm:1 ../../interactive.pm:1 ../../harddrake/sound.pm:1 -#: ../../standalone/drakbug:1 ../../standalone/drakconnect:1 -#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1 -#: ../../standalone/service_harddrake:1 -#, c-format -msgid "Please wait" -msgstr "еy" - -#: ../../mouse.pm:1 -#, c-format -msgid "Genius NetMouse" -msgstr "Genius NetMouse" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "None" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "The entered IP is not correct.\n" -msgstr "ӫT" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Please be sure that the cron daemon is included in your services." -msgstr "" -"нTwztΦw˨åBҥ cron Ƶ{Aȵ{C\n" -"\n" -"Ъ`NثeҦ '' C|ϥεwСC" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Ethernet Card" -msgstr "Etnernet d" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Delete selected printer" -msgstr "RҿWh" - -#: ../../services.pm:1 ../../ugtk2.pm:1 -#, c-format -msgid "Info" -msgstr "T" - -#: ../../help.pm:1 ../../install_steps_gtk.pm:1 -#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Install" -msgstr "w" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Click on \"%s\" if you want to delete all data and partitions present on\n" -"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" -"to recover any data and partitions present on this hard drive, including\n" -"any Windows data.\n" -"\n" -"Click on \"%s\" to stop this operation without losing any data and\n" -"partitions present on this hard drive." -msgstr "" -"pGzuTwnMoӵwФWҦΰϻPƪܡAIyTwzsC" -"zܳoӶثANuSkϦ^wФWƤFC\n" -"\n" -"ziHIyzsoӿܡC" - -#: ../../steps.pm:1 -#, c-format -msgid "Exit install" -msgstr "}w˵{" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"Everything has been configured.\n" -"You may now share Internet connection with other computers on your Local " -"Area Network, using automatic network configuration (DHCP)." -msgstr "" -"CӶسwg]wnFC\n" -"{bztΤwgzL DHCP ʺA IP t覡osu IPA\n" -"åB]wgzLLqWeɦs Internet AȡC" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Remote CUPS server" -msgstr " CUPS A" - -#: ../../mouse.pm:1 -#, c-format -msgid "Sun - Mouse" -msgstr "Sun - ƹ" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"There is only one configured network adapter on your system:\n" -"\n" -"%s\n" -"\n" -"I am about to setup your Local Area Network with that adapter." -msgstr "" -"ztΥثe@iwg]wnd:\n" -"\n" -"%s\n" -"\n" -"{bnioidPϰsuպA]wC" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Submit cpuinfo" -msgstr "" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Minimal install" -msgstr "̤pw" - -#: ../../lang.pm:1 -#, c-format -msgid "Ethiopia" -msgstr "Ethiopia" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "YES" -msgstr "" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Enable \"crontab\" and \"at\" for users" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Devanagari" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "" -"- pci devices: this gives the PCI slot, device and function of this card\n" -"- eide devices: the device is either a slave or a master device\n" -"- scsi devices: the scsi bus and the scsi device ids" -msgstr "" -"- PCI ˸m G]t PCI Ad˸m\\n" -"- EIDE ˸mG]t Master Ϊ̬O Slave ˸m\n" -"- SCSI ˸mG]t SCSI yƸ˸mP SCSI ˸m IDS" - -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Total size: %d / %d MB" -msgstr "`@jpG %d / %d MB" - -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "disabled" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Search for new scanners" -msgstr "iΪL" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Disabling servers..." -msgstr "bA..." - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Installation of %s failed. The following error occured:" -msgstr "w %s ѡAoͦpU~G" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." -msgstr "Lk mkinitrd -f /boot/initrd-%s.img %sC" - -#: ../../install_any.pm:1 -#, c-format -msgid "" -"You have selected the following server(s): %s\n" -"\n" -"\n" -"These servers are activated by default. They don't have any known security\n" -"issues, but some new ones could be found. In that case, you must make sure\n" -"to upgrade as soon as possible.\n" -"\n" -"\n" -"Do you really want to install these servers?\n" -msgstr "" -"zwgܦwˤFUM: %s\n" -"\n" -"\n" -"oǮMw˦nw]OҰʪA]oǮMYǼhӻOwAҥH" -"iLH|gѳoǮM|}M`ztΡC]ijAw˦ntΫA@wn" -"TwoǮMO_wgsAYOܽаOo\n" -"@wnsC\n" -"\n" -"\n" -"zTwunw˳oǮMضܡH\n" - -#: ../../printer/main.pm:1 -#, c-format -msgid "Network printer (TCP/Socket)" -msgstr "L (TCP/Socket)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup User files..." -msgstr "ƥϥΪɮ..." - -#: ../../steps.pm:1 -#, c-format -msgid "Install system" -msgstr "w˨t" - -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "First DNS Server (optional)" -msgstr "Ĥ@xDNSA (iJ)" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "" -"Alternatively, you can specify a device name/file name in the input line" -msgstr "пܱzLsAΪ̬OJӸ˸mW" - -#: ../../security/help.pm:1 -#, c-format -msgid "" -"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" -"is greater than 3 in /etc/security/msec/security.conf, creates the\n" -"symlink /etc/security/msec/server to point to\n" -"/etc/security/msec/server.<SERVER_LEVEL>.\n" -"\n" -"The /etc/security/msec/server is used by chkconfig --add to decide to\n" -"add a service if it is present in the file during the installation of\n" -"packages." -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Russian (Phonetic)" -msgstr "Xù ()" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "dhcpd Config..." -msgstr "dhcpd ]w..." - -#: ../../standalone/drakgw:1 -#, c-format -msgid "The setup has already been done, but it's currently disabled." -msgstr "oӳ]wewgFALثeOBzSҥΪA" - -#: ../../any.pm:1 -#, c-format -msgid "LILO/grub Installation" -msgstr "w LILO GRUB" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Israeli" -msgstr "HC" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer \"%s\" on server \"%s\"" -msgstr "L \"%s\"A \"%s\"" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Floppy can be removed now" -msgstr "в}nФϤ" - -#: ../../help.pm:1 -#, c-format -msgid "Truly minimal install" -msgstr "̤pw" - -#: ../../lang.pm:1 -#, c-format -msgid "Denmark" -msgstr "Denmark" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Moving partition..." -msgstr "bʤΰ..." - -#: ../../standalone/drakgw:1 -#, c-format -msgid "(This) DHCP Server IP" -msgstr " DHCP D IP" - -#: ../../Xconfig/test.pm:1 -#, c-format -msgid "Test of the configuration" -msgstr "ճ]w" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Installing %s ..." -msgstr "bwˮM %s..." - -#: ../../help.pm:1 -#, c-format -msgid "" -"If you told the installer that you wanted to individually select packages,\n" -"it will present a tree containing all packages classified by groups and\n" -"subgroups. While browsing the tree, you can select entire groups,\n" -"subgroups, or individual packages.\n" -"\n" -"Whenever you select a package on the tree, a description appears on the\n" -"right to let you know the purpose of the package.\n" -"\n" -"!! If a server package has been selected, either because you specifically\n" -"chose the individual package or because it was part of a group of packages,\n" -"you will be asked to confirm that you really want those servers to be\n" -"installed. By default Mandrake Linux will automatically start any installed\n" -"services at boot time. Even if they are safe and have no known issues at\n" -"the time the distribution was shipped, it is entirely possible that that\n" -"security holes were discovered after this version of Mandrake Linux was\n" -"finalized. If you do not know what a particular service is supposed to do\n" -"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n" -"install the listed services and they will be started automatically by\n" -"default during boot. !!\n" -"\n" -"The \"%s\" option is used to disable the warning dialog which appears\n" -"whenever the installer automatically selects a package to resolve a\n" -"dependency issue. Some packages have relationships between each other such\n" -"that installation of a package requires that some other program is also\n" -"rerquired to be installed. The installer can determine which packages are\n" -"required to satisfy a dependency to successfully complete the installation.\n" -"\n" -"The tiny floppy disk icon at the bottom of the list allows you to load a\n" -"package list created during a previous installation. This is useful if you\n" -"have a number of machines that you wish to configure identically. Clicking\n" -"on this icon will ask you to insert a floppy disk previously created at the\n" -"end of another installation. See the second tip of last step on how to\n" -"create such a floppy." -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Choose your filesystem encryption key" -msgstr "ܱzɮרtΩҨϥΪ[K_" - -#: ../../lang.pm:1 -#, c-format -msgid "Sierra Leone" -msgstr "Sierra Leone" - -#: ../../lang.pm:1 -#, c-format -msgid "Botswana" -msgstr "Botswana" - -#: ../../lang.pm:1 -#, c-format -msgid "Andorra" -msgstr "Andorra" - -#: ../../standalone/draksec:1 -#, fuzzy, c-format -msgid "(default value: %s)" -msgstr " (w]G%s)" - -#: ../../security/help.pm:1 -#, c-format -msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Alternative test page (Letter)" -msgstr "Letter ȱiCLխ" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"DHCP Server Configuration.\n" -"\n" -"Here you can select different options for the DHCP server configuration.\n" -"If you don't know the meaning of an option, simply leave it as it is.\n" -"\n" -msgstr "" -"DHCP A]wC\n" -"\n" -"ziHboܳ]w DHCP պA]wC\n" -"pGzMѼƪNAziHťդnJơC\n" -"\n" - -#: ../../Xconfig/card.pm:1 -#, fuzzy, c-format -msgid "Choose an X server" -msgstr "XA X A{" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Swap partition size in MB: " -msgstr "mΰϪjp (MB)G " - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "No changes to backup!" -msgstr "ƥSʡI" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Formatted\n" -msgstr "w榡\n" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Type of install" -msgstr "w" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer \"%s\" on SMB/Windows server \"%s\"" -msgstr "L \"%s\"A SMB/Windows A \"%s\"" - -#: ../../modules/parameters.pm:1 -#, c-format -msgid "%d comma separated numbers" -msgstr "%d ΤjƦr" - -#: ../../services.pm:1 -#, c-format -msgid "" -"The rusers protocol allows users on a network to identify who is\n" -"logged in on other responding machines." -msgstr "" -"rusers qTwAWϥΪ̱oǨϥΪ̵nJb\n" -"W" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "Automatic Steps Configuration" -msgstr "۰ʤƨBJ]w" - -#: ../../lang.pm:1 -#, c-format -msgid "Barbados" -msgstr "Barbados" - -#: ../../share/advertising/02-community.pl:1 -#, c-format -msgid "" -"Want to know more and to contribute to the Open Source community? Get " -"involved in the Free Software world!" -msgstr "nDh Open Source sƱH ѻPۥѳn@" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Please select data to backup..." -msgstr "пܥΨӳƥƪ˸m..." - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "" -"Connection failed.\n" -"Verify your configuration in the Mandrake Control Center." -msgstr "" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "received" -msgstr "" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Enable su only from the wheel group members or for any user" -msgstr "" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "/File/_New" -msgstr "/ɮ/sW (_N)" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "The DNS Server IP" -msgstr " DHCP D IP" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "IP Range End:" -msgstr "" - -#: ../../security/level.pm:1 -#, c-format -msgid "High" -msgstr "" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Add a new printer to the system" -msgstr "sWs" - -#: ../../any.pm:1 -#, c-format -msgid "NoVideo" -msgstr "NoVideo" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "this field describes the device" -msgstr "Ӹ˸myz" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Adding printer to Star Office/OpenOffice.org/GIMP" -msgstr "sWL Star Office/OpenOffice.org/GIMP " - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Local Printers" -msgstr "L" - -#: ../../standalone/drakpxe:1 -#, fuzzy, c-format -msgid "Installation image directory" -msgstr "Xpmac (ܥdXʵ{w)" - -#: ../../any.pm:1 -#, c-format -msgid "NIS Server" -msgstr "NIS AD" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Port: %s" -msgstr "s" - -#: ../../lang.pm:1 -#, c-format -msgid "Spain" -msgstr "Spain" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "local config: %s" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "This user name has already been added" -msgstr "oӨϥΪ̤wgsbF" - -#: ../../interactive.pm:1 -#, c-format -msgid "Choose a file" -msgstr "ɮ" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Apply" -msgstr "M" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Auto-detect available ports" -msgstr "۰ʰ" - -#: ../../lang.pm:1 -#, c-format -msgid "San Marino" -msgstr "San Marino" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Internet Connection Sharing currently disabled" -msgstr "Internet su@ɥثeFC" - -#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 -#, c-format -msgid "Belgium" -msgstr "Q" - -#: ../../lang.pm:1 -#, c-format -msgid "Kuwait" -msgstr "¯S" - -#: ../../any.pm:1 -#, c-format -msgid "Choose the window manager to run:" -msgstr "zQϥΪz{G" - -# calendar/gui/goto-dialog.glade.h:3 -#: ../../standalone/drakbackup:1 -#, c-format -msgid "December" -msgstr "12" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "sub generation of the cpu" -msgstr "" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "First Time Wizard" -msgstr "F" - -#: ../../install_steps.pm:1 -#, c-format -msgid "" -"An error occurred, but I don't know how to handle it nicely.\n" -"Continue at your own risk." -msgstr "" -"oͤF@ӵ{DӦpBm~A\n" -"n~wˤu@ܽФpߡC" - -#: ../../lang.pm:1 -#, c-format -msgid "Taiwan" -msgstr "xW" - -#: ../../lang.pm:1 -#, c-format -msgid "Pakistan" -msgstr "Pakistan" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "please wait, parsing file: %s" -msgstr "еyԡAbѪRɮסG%s" - -#: ../../install_steps_gtk.pm:1 -#, fuzzy, c-format -msgid "Importance: " -msgstr "nʡG %s\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"To be able to print with your Lexmark inkjet and this configuration, you " -"need the inkjet printer drivers provided by Lexmark (http://www.lexmark." -"com/). Click on the \"Drivers\" link. Then choose your model and afterwards " -"\"Linux\" as operating system. The drivers come as RPM packages or shell " -"scripts with interactive graphical installation. You do not need to do this " -"configuration by the graphical frontends. Cancel directly after the license " -"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " -"adjust the head alignment settings with this program." -msgstr "" -"YOƱϥγox Lexmark QLiCL\n" -"zݭn Lexmark (http://www.lexmark.com) W\n" -"MsAUoxLXʵ{CzsW\n" -"Lexmark AI \"Drivers\" sAܱz\n" -"ثeϥθӴڦLAýT{Oϥ \"Linux\"\n" -"C@ӻAzU^ӪɮסAiO RPM Mɮ\n" -"Ϊ̬OX shell script (ɮױN|Ұʦw˵{)C\n" -"@ӻAzäݭnzLϦƪeݤӶi\n" -"]wCMϥ \"lexmarkmaintain\" {بӦCLQY\n" -"եu@]wC" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Permissions" -msgstr "v" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Provider name (ex provider.net)" -msgstr "ISP W (Ѫ̦W)" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "" -"Your system is low on resources. You may have some problem installing\n" -"Mandrake Linux. If that occurs, you can try a text install instead. For " -"this,\n" -"press `F1' when booting on CDROM, then enter `text'." -msgstr "" -"ztθ귽GӧC (OӤֵ)A\n" -"oiɭPbw˹L{|oͤiw~\n" -"ɭPw˥ѡCijzAYOUӪTLk`\n" -"w˪ܡAЧΤrҦ覡w˸ΡC\n" -"]NO}ɥX{ boot: TɡAпJ text \n" -"irw˧YiC" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Use the Windows partition for loopback" -msgstr "ϥ Windows ΰϧ@ loopback" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Armenian (typewriter)" -msgstr "Ȭ (typewriter)" - -#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 -#, c-format -msgid "Connection type: " -msgstr "suءG " - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Graphical interface" -msgstr "ϧΤ" - -#: ../../lang.pm:1 -#, c-format -msgid "Chad" -msgstr "Chad" - -#: ../../lang.pm:1 -#, c-format -msgid "India" -msgstr "L" - -#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 -#, c-format -msgid "XFree %s with 3D hardware acceleration" -msgstr "XFree %s ]t 3D w[t\" - -#: ../../lang.pm:1 -#, c-format -msgid "Slovakia" -msgstr "Slovakia" - -#: ../../lang.pm:1 -#, c-format -msgid "Singapore" -msgstr "s[Y" - -#: ../../lang.pm:1 -#, c-format -msgid "Cambodia" -msgstr "Cambodia" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Monitor HorizSync: %s\n" -msgstr "ùsWvG %s\n" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Path" -msgstr "|" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "NOT FOUND" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Here you can specify any arbitrary command line into which the job should be " -"piped instead of being sent directly to a printer." -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"The printing system (%s) will not be started automatically when the machine " -"is booted.\n" -"\n" -"It is possible that the automatic starting was turned off by changing to a " -"higher security level, because the printing system is a potential point for " -"attacks.\n" -"\n" -"Do you want to have the automatic starting of the printing system turned on " -"again?" -msgstr "" -"CLAȨt (%s) N|btζ}ɸJC\n" -"\n" -"YOztγ]wOܤwŶتܡA\n" -"w]]O|ҰʦCLAȪتC\n" -"\n" -"zƱo]wb}ɯw]ҰʦCL\n" -"AȪضܡH" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Printer %s\n" -"What do you want to modify on this printer?" -msgstr "" -"L %s\n" -"znקoӦLӶءH" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Add host" -msgstr "sWϥΪ" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "" -"If you really think that you know which driver is the right one for your " -"card\n" -"you can pick one in the above list.\n" -"\n" -"The current driver for your \"%s\" sound card is \"%s\" " -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "" -"Would you like to allow users to share some of their directories?\n" -"Allowing this will permit users to simply click on \"Share\" in konqueror " -"and nautilus.\n" -"\n" -"\"Custom\" permit a per-user granularity.\n" -msgstr "" -"zn\ϥΪ̯}XL̦ۤvؿɮפɶܡH\n" -"YO}AzNiHb konqueror Ϊ̬O nautilus \n" -" \"Share\"oӤɶءC\n" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"Please choose load or save package selection on floppy.\n" -"The format is the same as auto_install generated floppies." -msgstr "" -"пܦbJΪ̬OxsҿܪMϤC\n" -"ӺϤ榡NO۰ʦwˮɩһs@ͪϤ榡C" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "China (broadcast)" -msgstr " (broadcast)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use quota for backup files." -msgstr "ƥɮױҥγ̤jeqtC" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Configuring printer \"%s\"..." -msgstr "b]wu%svL ..." - -#: ../../fs.pm:1 -#, c-format -msgid "" -"Do not allow execution of any binaries on the mounted\n" -"file system. This option might be useful for a server that has file systems\n" -"containing binaries for architectures other than its own." -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Internet connection" -msgstr "Internet su" - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "" -"Loading module %s failed.\n" -"Do you want to try again with other parameters?" -msgstr "" -"J %s ҲեѡA\n" -"znΨLѼƦAդ@?" - -#: ../../share/advertising/01-thanks.pl:1 -#, c-format -msgid "Welcome to the Open Source world." -msgstr "wӨ}X@ɡC" - -#: ../../lang.pm:1 -#, c-format -msgid "Bosnia and Herzegovina" -msgstr "Bosnia and Herzegovina" - -#: ../../fsedit.pm:1 -#, c-format -msgid "" -"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " -"point\n" -msgstr "" -"zݭn@ӯuΰ (ext2/ext3, reiserfs, xfs άO jfs) өoӱI\n" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "You must enter a host name or an IP address.\n" -msgstr "пJDW٩άO IP\n" - -#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 -#, c-format -msgid "Netherlands" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Sending files by FTP" -msgstr "beXɮ..." - -#: ../../network/isdn.pm:1 -#, c-format -msgid "Internal ISDN card" -msgstr " ISDN d" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "" -"There's no known OSS/ALSA alternative driver for your sound card (%s) which " -"currently uses \"%s\"" -msgstr "ثeOSS/ALSA Xʵ{䴩Aĥd (%s)AҲլ \"%s\"" - -#: ../../network/modem.pm:1 -#, fuzzy, c-format -msgid "Title" -msgstr "Ϊ" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Install & convert Fonts" -msgstr "w˻Pഫr" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "WARNING" -msgstr "ĵi" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Installing bootloader" -msgstr "bw˶}{" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "replay" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "detected %s" -msgstr " %s " - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Expect is an extension to the Tcl scripting language that allows interactive " -"sessions without user intervention." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Virgin Islands (U.S.)" -msgstr "Virgin Islands (U.S.)" - -#: ../../partition_table.pm:1 -#, c-format -msgid "Bad backup file" -msgstr "~ƥɮ" - -#: ../../standalone/drakgw:1 -#, fuzzy, c-format -msgid "" -"The setup of Internet connection sharing has already been done.\n" -"It's currently disabled.\n" -"\n" -"What would you like to do?" -msgstr "" -"Internet su@ɤwg]wFCثeOBϥΪAC\n" -"\n" -"zƱnBzӡH" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Enter IP address and port of the host whose printers you want to use." -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Pipe into command" -msgstr "ϥ Pipe u覡զCLu@" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "" -"Some hardware on your computer needs ``proprietary'' drivers to work.\n" -"You can find some information about them at: %s" -msgstr "" -"tάYǵwݭnB~Xʵ{HKXʤu@C\n" -"ziHbo̧@ǬT: %s" - -#: ../../lang.pm:1 -#, c-format -msgid "Haiti" -msgstr "Haiti" - -#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Detecting devices..." -msgstr "b˸m..." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Custom allows you to specify your own day and time. The other options use " -"run-parts in /etc/crontab." -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "" -"Description of the fields:\n" -"\n" -msgstr "" -"쪺yzTG\n" -"\n" - -#: ../../standalone/draksec:1 -#, fuzzy, c-format -msgid "Basic options" -msgstr "DrakSec Ѽƿﶵ" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "the name of the CPU" -msgstr "˸mtӦW" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Accept bogus IPv4 error messages" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Refreshing printer data..." -msgstr "bsL ..." - -#: ../../install2.pm:1 -#, c-format -msgid "You must also format %s" -msgstr "z]n榡 %s" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Be careful: this operation is dangerous." -msgstr "ФpߡAoӰʧ@D`MIC" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Insert a floppy containing package selection" -msgstr "дJ@i]tnMϤ" - -#: ../../diskdrake/dav.pm:1 -#, c-format -msgid "Server: " -msgstr "DG " - -#: ../../standalone/draksec:1 -#, c-format -msgid "Security Alerts:" -msgstr "wĵܡG" - -#: ../../crypto.pm:1 ../../lang.pm:1 -#, c-format -msgid "Sweden" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use Expect for SSH" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Poland" -msgstr "Poland" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "Other ports" -msgstr "ճs" - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "number of capture buffers for mmap'ed capture" -msgstr "" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "SMBus controllers" -msgstr "" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Connection timeout (in sec)" -msgstr "suO (H)" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "" -"Some of the early i486DX-100 chips cannot reliably return to operating mode " -"after the \"halt\" instruction is used" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Croatian" -msgstr "JùJ" - -#: ../../help.pm:1 -#, c-format -msgid "Use existing partition" -msgstr "ϥΤwgsbΰ" - -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "Unable to contact mirror %s" -msgstr "Lkإߥt@{G%s" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "/Help/_About..." -msgstr "// (_A)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Remove user directories before restore." -msgstr "b^sƮɥRϥΪ̪ؿ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"You are going to configure a remote printer. This needs working network " -"access, but your network is not configured yet. If you go on without network " -"configuration, you will not be able to use the printer which you are " -"configuring now. How do you want to proceed?" -msgstr "" -"zثen}l]wݦLCLءCni榹س]weAztλݭn" -"ƺ\HKisʧ@AOثe|]wCpGzⲤL]w" -"~iUBJܡA]wϥλݦL\رNLk]wCz" -"n@OH" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "CUPS printer configuration" -msgstr "OKI Windows L]w" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "could not find any font in your mounted partitions" -msgstr "bztΥHWΰϤ䤣rɮ" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "F00f bug" -msgstr "" - -#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 -#, c-format -msgid "XFree %s" -msgstr "XFree %s" - -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "Domain Name:" -msgstr "W" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Root umask" -msgstr "SKX" - -#: ../../any.pm:1 -#, c-format -msgid "On Floppy" -msgstr "bnо" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Reboot by the console user" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore" -msgstr "^s" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, check if the network devices are in promiscuous mode." -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Looking for available packages..." -msgstr "bjMiHw˪M" - -#: ../../any.pm:1 -#, c-format -msgid "Init Message" -msgstr "ҰʰT" - -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Rescue partition table" -msgstr "mϵwФΪ" - -#: ../../lang.pm:1 -#, c-format -msgid "Cyprus" -msgstr "Cyprus" - -#: ../../standalone/net_monitor:1 -#, fuzzy, c-format -msgid "Connection complete." -msgstr "sut" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Remove from RAID" -msgstr "ѺϺа}C" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "This encryption key is too simple (must be at least %d characters long)" -msgstr "oӱKX²F (@wܤ֭n %d Ӧr~)" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Configuration Wizards" -msgstr "]wF" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "ISDN connection" -msgstr "ISDN su" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "CD-R / DVD-R" -msgstr "CDROM / DVDROM" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "primary" -msgstr "" - -#: ../../printer/main.pm:1 -#, c-format -msgid " on SMB/Windows server \"%s\", share \"%s\"" -msgstr " Windows D \"%s\"AɦW \"%s\"" - -#: ../../help.pm:1 -#, c-format -msgid "" -"This dialog is used to choose which services you wish to start at boot\n" -"time.\n" -"\n" -"DrakX will list all the services available on the current installation.\n" -"Review each one carefully and uncheck those which are not needed at boot\n" -"time.\n" -"\n" -"A short explanatory text will be displayed about a service when it is\n" -"selected. However, if you are not sure whether a service is useful or not,\n" -"it is safer to leave the default behavior.\n" -"\n" -"!! At this stage, be very careful if you intend to use your machine as a\n" -"server: you will probably not want to start any services that you do not\n" -"need. Please remember that several services can be dangerous if they are\n" -"enabled on a server. In general, select only the services you really need.\n" -"!!" -msgstr "" -"UӱzݭnܧAҰʨtήɭnǪAȰB@C\n" -"\n" -"ҥX{ҦiܶءAOw˹L{Ҧw˶ihtΪAȮMCХJӸ" -"ӬdݨMwǪAȭn}ɯҰʡC\n" -"\n" -"AӶخɡAù|X{@²AiDzoӪAȶتγ~C" -"FAYOzӶعbTwO_nҥΪܡAw@kNOˤn" -"ʧ@YiC\n" -"\n" -"Ъ`N@UApGzoxOMn@InternetAѺWAȪܡA" -"ijzԲӫҨMwǪAȭn}A]YǪAȮMҰʫi|@Ǽb" -"wʭIDCijzAunA}AȶاYiC" - -#: ../../lang.pm:1 -#, c-format -msgid "Niue" -msgstr "Niue" - -#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Skip" -msgstr "L" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Activates/Deactivates all network interfaces configured to start\n" -"at boot time." -msgstr "btζ}ɡAܱҰʺ\AΪ̬OҰʸӪAȡC" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "" -"the CPU frequency in MHz (Megahertz which in first approximation may be " -"coarsely assimilated to number of instructions the cpu is able to execute " -"per second)" -msgstr "" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Mandrake Linux Printer Management Tool" -msgstr "Mandrake Linux w˵{ %s" - -#: ../../pkgs.pm:1 -#, c-format -msgid "important" -msgstr "n" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Total Progress" -msgstr "i" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"DrakX will first detect any IDE devices present in your computer. It will\n" -"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" -"found, DrakX will automatically install the appropriate driver.\n" -"\n" -"Because hardware detection is not foolproof, DrakX may fail in detecting\n" -"your hard drives. If so, you'll have to specify your hardware by hand.\n" -"\n" -"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" -"want to configure options for it. You should allow DrakX to probe the\n" -"hardware for the card-specific options which are needed to initialize the\n" -"adapter. Most of the time, DrakX will get through this step without any\n" -"issues.\n" -"\n" -"If DrakX is not able to probe for the options to automatically determine\n" -"which parameters need to be passed to the hardware, you'll need to manually\n" -"configure the driver." -msgstr "" -"DrakX {ثebztΤW IDE ˸mC~A]|KytΩҦw˪ " -"SCSI dC SCSI dɡADrakX {N|۰ʦw˾ASCSI Xʵ{X" -"ʸ SCSI ]ơC\n" -"\n" -"]w˵{]\LkXztάO_٦hw˸mAҥHDrakX{" -"|߰ݱztάO_uPCI SCSIvdsbCAܡyOzɭԱzNiH" -"ʿܱztΩҦw˪SCSIdءCYOSܡAܡy_zNiHFCYO" -"zbLkTwǵw鶵ئsbAziHy˵wTzIyTwz^" -"쥻eC\n" -"\n" -"zϥΤʤ覡wztΪdɡADrakX{|߰ݱzO_noXʵ{B" -"~JLѼơCzӭn\ DrakX ۰ʰӶg˸mAADuLk" -"ɤ~ʫwѼƶǹFXʵ{C\n" -"\n" -"Ъ`NOAYOznʫwǤJѼơAijzаѦҨϥΤUĤT " -"(\"Collecting Information on Your hardware\") HKohTC" - -#: ../../lang.pm:1 -#, c-format -msgid "Aruba" -msgstr "Aruba" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Users" -msgstr "ϥΪ" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Preparing bootloader..." -msgstr "bdzƶ}{" - -#: ../../network/network.pm:1 -#, c-format -msgid "Gateway (e.g. %s)" -msgstr "qTh ( %s)" - -#: ../../any.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "The passwords do not match" -msgstr "JKXŦX" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Examples for correct IPs:\n" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Please choose the media for backup." -msgstr "пܭnΨӳƥ˸m" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Frequency (MHz)" -msgstr "" - -#: ../../install_any.pm:1 -#, c-format -msgid "" -"To use this saved packages selection, boot installation with ``linux " -"defcfg=floppy''" -msgstr "" -"nϥΩxsMܡAb}w˱Ұ LILO {ɭԡA boot J:linux " -"defcfg=floopy YiC" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "the number of the processor" -msgstr " iBarm " - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Hardware clock set to GMT" -msgstr "w]w GMT ɶ" - -#: ../../network/isdn.pm:1 -#, fuzzy, c-format -msgid "Do you want to start a new configuration ?" -msgstr "zQnձz]wȶܡH" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Give a file name" -msgstr "JɮצW" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Please choose the port that your printer is connected to." -msgstr "пLҳssC" - -#: ../../standalone/livedrake:1 -#, c-format -msgid "Change Cd-Rom" -msgstr "Ф" - -#: ../../lang.pm:1 -#, c-format -msgid "Paraguay" -msgstr "Paraguay" - -#: ../../network/netconnect.pm:1 -#, fuzzy, c-format -msgid "Configuration is complete, do you want to apply settings ?" -msgstr "znέ@ XFree ]w ?" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Use Incremental/Differential Backups (do not replace old backups)" -msgstr "ϥλWƥ (|л\¦ƥ)" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Maintain /etc/dhcpd.conf:\n" -" \tTo net boot clients, each client needs a dhcpd.conf entry, " -"assigning an IP \n" -" \taddress and net boot images to the machine. drakTermServ helps " -"create/remove \n" -" \tthese entries.\n" -"\t\t\t\n" -" \t(PCI cards may omit the image - etherboot will request the correct " -"image. \n" -"\t\t\tYou should also consider that when etherboot looks for the images, it " -"expects \n" -"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" -"\t\t\t \n" -" \tA typical dhcpd.conf stanza to support a diskless client looks " -"like:" -msgstr "" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "There's no known driver for your sound card (%s)" -msgstr "|ѱzϥΪĥdXʵ{ (%s)" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "force" -msgstr "j" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Exit" -msgstr "}" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"NOTE: Depending on the printer model and the printing system up to %d MB of " -"additional software will be installed." -msgstr "" -"NOTEGݭnw˥nLXʵ{MɮסAj@ %d MB ŶC" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "" -"You don't have any configured interface.\n" -"Configure them first by clicking on 'Configure'" -msgstr "" -"z٨Swg]wnC\n" -"I]wӶi]wʧ@" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Estonian" -msgstr "RF" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Apache is a World Wide Web server. It is used to serve HTML files and CGI." -msgstr "Apache O@Ӵ Web AȪ{AѬ[] Web Server ϥΪsC" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "" -"Enter your CD Writer device name\n" -" ex: 0,1,0" -msgstr "" -"пJzN˸mW\n" -"蹳OG 0,1,0" - -#: ../../standalone/draksec:1 -#, c-format -msgid "ALL" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Add/Del Clients" -msgstr "sW/RΤ" - -#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1 -#: ../../standalone/drakpxe:1 -#, c-format -msgid "Choose the network interface" -msgstr "" - -#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Unknown Model" -msgstr "" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "CD/DVD burners" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"Partition booted by default\n" -" (for MS-DOS boot, not for lilo)\n" -msgstr "" -"w]}ΰ\n" -" ( MS-DOS }{Ϊ, lilo L)\n" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Enable \"%s\" to read the file" -msgstr "" - -#: ../../standalone/draksplash:1 -#, fuzzy, c-format -msgid "choose image" -msgstr "ܬMɮ " - -#: ../../network/shorewall.pm:1 -#, c-format -msgid "Firewalling configuration detected!" -msgstr "]wwgF!" - -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Connection name" -msgstr "suW" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "" -"x coordinate of text box\n" -"in number of characters" -msgstr " rr X b " - -#: ../../fsedit.pm:1 -#, c-format -msgid "" -"You may not be able to install lilo (since lilo doesn't handle a LV on " -"multiple PVs)" -msgstr "" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Updating package selection" -msgstr "bsM" - -#: ../../diskdrake/interactive.pm:1 -#, fuzzy, c-format -msgid "Where do you want to mount the loopback file %s?" -msgstr "zn loopback ɮ %s b ?" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "" -"The floppy has been successfully generated.\n" -"You may now replay your installation." -msgstr "" -"wg\إߦ۰ʦw˺ϤC\n" -"ziHϥγoiϤi۰ʦw˪{" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use CD-R/DVD-R to backup" -msgstr "ϥ CD/DVDROM ƥ" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "the number of buttons the mouse has" -msgstr " iBarm " - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Replay" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup other files" -msgstr "ƥLɮ" - -#: ../../install_steps.pm:1 -#, c-format -msgid "No floppy drive available" -msgstr "SiΪnо" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup files are corrupted" -msgstr "ƥɮפwgl" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "TV norm:" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Cpuid family" -msgstr "" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "32 MB" -msgstr "32 MB" - -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "type: thin" -msgstr "榡G " - -#: ../../keyboard.pm:1 -#, c-format -msgid "Lithuanian AZERTY (new)" -msgstr "߳{ (s AZERTY )" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "yes means the arithmetic coprocessor has an exception vector attached" -msgstr "" - -#: ../../fsedit.pm:1 -#, fuzzy, c-format -msgid "" -"You've selected a software RAID partition as root (/).\n" -"No bootloader is able to handle this without a /boot partition.\n" -"Please be sure to add a /boot partition" -msgstr "" -"AwgܤF@ software RAID ΰϷ@ ڤΰ (/) I\n" -"znt~@ӤOb software RAID ΰϧ@ /boot IϥΡA\n" -"p}z{~`ҰʱztΡC" - -#: ../../any.pm:1 -#, c-format -msgid "Other OS (MacOS...)" -msgstr "L@~t (MacOS...)" - -#: ../../mouse.pm:1 -#, c-format -msgid "To activate the mouse," -msgstr "Fzƹϥ" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Bringing up the network" -msgstr "Ұʺsu" - -#: ../../common.pm:1 -#, c-format -msgid "Screenshots will be available after install in %s" -msgstr "bw %s Nѵe\" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"More than one Microsoft partition has been detected on your hard drive.\n" -"Please choose which one you want to resize in order to install your new\n" -"Mandrake Linux operating system.\n" -"\n" -"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" -"\"Capacity\".\n" -"\n" -"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" -"\"partition number\" (for example, \"hda1\").\n" -"\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" -"\"sd\" if it is a SCSI hard drive.\n" -"\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" -"hard drives:\n" -"\n" -" * \"a\" means \"master hard drive on the primary IDE controller\";\n" -"\n" -" * \"b\" means \"slave hard drive on the primary IDE controller\";\n" -"\n" -" * \"c\" means \"master hard drive on the secondary IDE controller\";\n" -"\n" -" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" -"\n" -"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" -"\"second lowest SCSI ID\", etc.\n" -"\n" -"\"Windows name\" is the letter of your hard drive under Windows (the first\n" -"disk or partition is called \"C:\")." -msgstr "" -"ثezwФWh Windows ΰϡAпܱzƱnYpWindows" -"ϡAHKŶXӦwˡuMandrake Linuxv@~tΡC\n" -"\n" -"CӤΰϳCXFO:yLinux W١z,yWindows W١z,yeqzC\n" -"\n" -"yLinux W١zOcʪ:ywЫAz,ywнsz,yΰϽsz(蹳" -"O: hda )C\n" -"\n" -"ywЫAzNOAYzϥΪO IDE wСA|ܡuhdv, YOSCSIwЪܡANO" -"ܡusdvC\n" -"\n" -"ywнszNObuhdvΪ̬Ousdv᭱rCH IDE wи˸mӻNq" -":\n" -"\n" -" uavoOuprimary IDE controller WĤ@x (master) wСvA\n" -"\n" -" ubvoOuprimmary IDE controller WĤGx (slave) wСvA\n" -"\n" -" ucvoOusecondary IDE controller WĤ@x (master) wСvA\n" -"\n" -" udvoOusecondary IDE controller WĤGx (slave) wСvC\n" -"\n" -"H SCSI wШӻAuavNOuSCSI IDE s̤p@xv, ubvNO" -"uSCSI IDEvsG@xwСvAM̦Uh.....\n" -"\n" -"uWindows W١vNOb Windows UϺоNW١A蹳OuC:\\vC" - -#: ../../lang.pm:1 -#, c-format -msgid "Tanzania" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Computing FAT filesystem bounds" -msgstr "bp fat ΰϪ" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"Backup Sources: \n" -msgstr "" -"\n" -"ƥӷ: \n" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "custom" -msgstr "ۭq" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Content of the file" -msgstr "ɮתe" - -#: ../../any.pm:1 -#, c-format -msgid "Authentication LDAP" -msgstr "LDAP {" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "Let me pick any driver" -msgstr "ܥXʵ{" - -#: ../../standalone/net_monitor:1 -#, fuzzy, c-format -msgid "Profile " -msgstr "]wɡG" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "transmitted" -msgstr "" - -#: ../../lang.pm:1 -#, fuzzy, c-format -msgid "Palestine" -msgstr "|" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "RAID md%s\n" -msgstr "Ϻа}C (RAID) md%s\n" - -#: ../../modules/parameters.pm:1 -#, c-format -msgid "%d comma separated strings" -msgstr "%d Τjr" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid " isdn" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Here is the full list of keyboards available" -msgstr "UMOiѿܪLC" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "Theme name" -msgstr " GW " - -#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 -#: ../../standalone/printerdrake:1 -#, c-format -msgid "/_Help" -msgstr "/ (_H)" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "Choosing an arbitrary driver" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Cook Islands" -msgstr "Cook Islands" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "" -"Here you can choose whether the scanners connected to this machine should be " -"accessable by remote machines and by which remote machines." -msgstr "" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "the width of the progress bar" -msgstr " iBare " - -#: ../../fs.pm:1 -#, c-format -msgid "Formatting partition %s" -msgstr "b榡Ƥΰ %s" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Hostname required" -msgstr "ݭnJDW" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Unselect fonts installed" -msgstr "ϦVww˦r" - -#: ../../mouse.pm:1 -#, c-format -msgid "Wheel" -msgstr "u" - -#: ../../standalone/drakbug:1 -#, fuzzy, c-format -msgid "Submit kernel version" -msgstr "֤ߪ" - -#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 -#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1 -#: ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1 -#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/gtk.pm:1 -#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 -#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1 -#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1 -#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 -#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 -#: ../../standalone/drakgw:1 ../../standalone/drakperm:1 -#: ../../standalone/draksec:1 ../../standalone/logdrake:1 -#: ../../standalone/mousedrake:1 ../../standalone/net_monitor:1 -#, c-format -msgid "Cancel" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Searching for configured scanners ..." -msgstr "iΪL" - -#: ../../harddrake/data.pm:1 -#, fuzzy, c-format -msgid "Videocard" -msgstr "ܼҦ" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\tBackups use tar and bzip2\n" -msgstr "\tϥ tar P bzip2 iƥ\n" - -#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 -#, c-format -msgid "Remove Selected" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "/Autodetect _modems" -msgstr "۰ʰ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remove printer" -msgstr "RL" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "View Last Log" -msgstr "" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "Which services would you like to allow the Internet to connect to?" -msgstr "@تAȱzn}~suAȩOH" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Connection Type" -msgstr "sG" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "" -"Welcome to the mail configuration utility.\n" -"\n" -"Here, you'll be able to set up the alert system.\n" -msgstr "" -"wӨl]wuC\n" -"\n" -"bo̡Az]wzĵܳq覡C\n" - -#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1 -#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1 -#: ../../standalone/drakperm:1 -#, c-format -msgid "Other" -msgstr "L" - -#: ../../any.pm:1 ../../harddrake/v4l.pm:1 ../../standalone/drakfloppy:1 -#, c-format -msgid "Default" -msgstr "w]}" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Button 2 Emulation" -msgstr "" - -#: ../../standalone/drakbug:1 -#, fuzzy, c-format -msgid "Please enter a package name." -msgstr "пJϥΪ̱b" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Run chkrootkit checks" -msgstr "" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "type1inst building" -msgstr "" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Abiword" -msgstr "Abiword" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "choose image file" -msgstr "ܬMɮ " - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "X server" -msgstr "X A{" - -#: ../../any.pm:1 -#, c-format -msgid "Domain Admin User Name" -msgstr "zb" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "There was an error while scanning for TV channels" -msgstr "yqWDoͿ~" - -#: ../../keyboard.pm:1 -#, c-format -msgid "US keyboard (international)" -msgstr "L (ڳqΫ)" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Not installed" -msgstr "|w" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Both Alt keys simultaneously" -msgstr "Pɨ Shift " - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "LAN connection" -msgstr "ϰsu" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "/File/-" -msgstr "/ɮ/-" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Italian" -msgstr "qjQ" - -#: ../../interactive.pm:1 -#, c-format -msgid "Basic" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -"\n" -" Copyright (C) 2002 by MandrakeSoft \n" -"\tStew Benedict sbenedict\\@mandrakesoft.com\n" -"\n" -msgstr "" - -#: ../../install_messages.pm:1 -#, c-format -msgid "http://www.mandrakelinux.com/en/92errata.php3" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Honduras" -msgstr "Honduras" - -#: ../../help.pm:1 -#, c-format -msgid "pdq" -msgstr "" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Card IO" -msgstr "d IO" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "when checked, owner and group won't be changed" -msgstr "ӶؿɡANLkt~ܮMΪ֦̻Psն" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"\n" -"This special Bootstrap\n" -"partition is for\n" -"dual-booting your system.\n" -msgstr "" -"\n" -"oO@ӥΨӧ@h}\n" -"ϥΪSΰϡC\n" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "" -"Please choose for each step whether it will replay like your install, or it " -"will be manual" -msgstr "пܨC@Ӧw˪BJAoDZN|OzҾާ@w˹L{" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "" -"You can also decide here whether scanners on remote machines should be made " -"available on this machine." -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\t-Network by FTP.\n" -msgstr "\t- (zL FTP)\n" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Reports check result to tty" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "You must enter a device or file name!" -msgstr "zݭnܩοJӦLW٩θ˸m!" - -#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 -#, c-format -msgid "/_Quit" -msgstr "/ (_Q)" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Graphics memory: %s kB\n" -msgstr "øϰOG %s kB\n" - -#: ../../standalone.pm:1 -#, c-format -msgid "" -"This program is free software; you can redistribute it and/or modify\n" -"it under the terms of the GNU General Public License as published by\n" -"the Free Software Foundation; either version 2, or (at your option)\n" -"any later version.\n" -"\n" -"This program is distributed in the hope that it will be useful,\n" -"but WITHOUT ANY WARRANTY; without even the implied warranty of\n" -"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" -"GNU General Public License for more details.\n" -"\n" -"You should have received a copy of the GNU General Public License\n" -"along with this program; if not, write to the Free Software\n" -"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "access to compilation tools" -msgstr "sJu" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Please select data to restore..." -msgstr "пn^s..." - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "" -"If you plan to use aboot, be carefull to leave a free space (2048 sectors is " -"enough)\n" -"at the beginning of the disk" -msgstr "" -"pGAϥ aboot {ܡAЪ`NzܤֻݭnbϺг̫eݫOd@iΪ" -" (2048 ϰϴNF)C" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Standard test page" -msgstr "зǦCLխ" - -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Create" -msgstr "s" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "What" -msgstr "ƥس]w" - -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "There was an error ordering packages:" -msgstr "ƦCMɵoͿ~G" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Bulgarian (BDS)" -msgstr "O[Q" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Disable Server" -msgstr "A" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Filesystem encryption key" -msgstr "ɮרtΥ[K_" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Gujarati" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" While you can use a pool of IP addresses, rather than setup a " -"specific entry for\n" -" a client machine, using a fixed address scheme facilitates using the " -"functionality\n" -" of client-specific configuration files that ClusterNFS provides.\n" -"\t\t\t\n" -" Note: The '#type' entry is only used by drakTermServ. Clients can " -"either be 'thin'\n" -" or 'fat'. Thin clients run most software on the server via xdmcp, " -"while fat clients run \n" -" most software on the client machine. A special inittab, %s is\n" -" written for thin clients. System config files xdm-config, kdmrc, and " -"gdm.conf are \n" -" modified if thin clients are used, to enable xdmcp. Since there are " -"security issues in \n" -" using xdmcp, hosts.deny and hosts.allow are modified to limit access " -"to the local\n" -" subnet.\n" -"\t\t\t\n" -" Note: The '#hdw_config' entry is also only used by drakTermServ. " -"Clients can either \n" -" be 'true' or 'false'. 'true' enables root login at the client " -"machine and allows local \n" -" hardware configuration of sound, mouse, and X, using the 'drak' " -"tools. This is enabled \n" -" by creating separate config files associated with the client's IP " -"address and creating \n" -" read/write mount points to allow the client to alter the file. Once " -"you are satisfied \n" -" with the configuration, you can remove root login privileges from " -"the client.\n" -"\t\t\t\n" -" Note: You must stop/start the server after adding or changing " -"clients." -msgstr "" - -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "" -"Please choose the first number of the 10-range you wish to edit,\n" -"or just hit Enter to proceed.\n" -"Your choice? " -msgstr "" -"пzns誺e10ӶءAUEnter~C\n" -"zثeܬOH" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "Save theme" -msgstr "xsG" - -#: ../../lang.pm:1 -#, c-format -msgid "Brazil" -msgstr "Brazil" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "Auto Install" -msgstr "۰ʦw" - -#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1 -#, c-format -msgid "Network Configuration Wizard" -msgstr "]wF" - -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Removable media automounting" -msgstr "˸m۰ʱ" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Enter the directory to save:" -msgstr "пJznxsؿW١G" - -#: ../../services.pm:1 -#, c-format -msgid "Printing" -msgstr "CL" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"There are no printers found which are directly connected to your machine" -msgstr "ztΰ즳Lw" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Create a new partition" -msgstr "إ߷sΰ" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "Driver:" -msgstr "Xʵ{G" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "unknown" -msgstr "" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Use fdisk" -msgstr "ϥ fdisk {" - -#: ../../mouse.pm:1 -#, c-format -msgid "MOVE YOUR WHEEL!" -msgstr "ʱzu !" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "sent: " -msgstr "" - -#: ../../network/network.pm:1 -#, c-format -msgid "Automatic IP" -msgstr "۰ʤt IP" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"There you are. Installation is now complete and your GNU/Linux system is\n" -"ready to use. Just click \"%s\" to reboot the system. The first thing you\n" -"should see after your computer has finished doing its hardware tests is the\n" -"bootloader menu, giving you the choice of which operating system to start.\n" -"\n" -"The \"%s\" button shows two more buttons to:\n" -"\n" -" * \"%s\": to create an installation floppy disk that will automatically\n" -"perform a whole installation without the help of an operator, similar to\n" -"the installation you just configured.\n" -"\n" -" Note that two different options are available after clicking the button:\n" -"\n" -" * \"%s\". This is a partially automated installation. The partitioning\n" -"step is the only interactive procedure.\n" -"\n" -" * \"%s\". Fully automated installation: the hard disk is completely\n" -"rewritten, all data is lost.\n" -"\n" -" This feature is very handy when installing a number of similar machines.\n" -"See the Auto install section on our web site for more information.\n" -"\n" -" * \"%s\"(*): saves a list of the packages selected in this installation.\n" -"To use this selection with another installation, insert the floppy and\n" -"start the installation. At the prompt, press the [F1] key and type >>linux\n" -"defcfg=\"floppy\" <<.\n" -"\n" -"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" -"\"mformat a:\")" -msgstr "" -"Ӧw˨BJo̪ɭԡANNzwgFyGNU/LinuxztΪw˨BJA" -"ziHIyTwzsҰʹqC\n" -"\n" -"yizs(MaҦ~|X{)AN|ܨӥiΪz:\n" -"\n" -" yͦ۰ʦw˺ϤzGoN|إߤ@i۰ʦw˪ϤA\n" -"Ӧ۰ʤƦw˪BJAN|̷ӱzާ@L{ӶiC\n" -"\n" -" Ъ`NoAzIoӶثAiHݨ٦ӰѼƶإiѿ:\n" -"\n" -" yzGoOb۰ʦwˤ覡AϺФζرN|ʤ覡ާ@C\n" -"\n" -" y۰ʤơzGoO۰ʪwˤ覡A]tϺеMIʧ@|۰ʳBzC\n" -"\n" -" o̪\Azݭnjqw˫ܦhLinuxtΦb@jsWܨӻoO۷" -"UCo̬i@BơAziHѦҺW۰ʦw˳`C\n" -"\n" -" yxsMܡz(*)GoӶشNONzeާ@ܩҭnw˪MM涵س" -"_ӦsϤAHKziHbƫٻݭnwMandrake Linux ɡAiH" -"Jeҿܭnw˪MMAݭnA@sܤFC\n" -"YOznϥγoiϤMMiw˪ܡA}ɥX{yMandrake Logoz" -"ɡAU F1 AMJulinux defcfg=\"floppy\"v YiC\n" -"\n" -"() nϥΡyxsMܡz\Azݭn@iwgϥDOS/Windows榡Ʀn " -"FAT 榡ϤHKϥΡC(GNU/Linux ҤUAiH mformat a: s@@iťպ" -"C)" - -#: ../../lang.pm:1 -#, c-format -msgid "Moldova" -msgstr "Moldova" - -#: ../../mouse.pm:1 -#, c-format -msgid "Kensington Thinking Mouse" -msgstr "Kensington Thinking Mouse" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Configuration of a remote printer" -msgstr "]wݦL" - -#: ../../share/advertising/13-mdkexpert_corporate.pl:1 -#, c-format -msgid "An online platform to respond to enterprise support needs." -msgstr "" - -#: ../../network/network.pm:1 -#, c-format -msgid "URL should begin with 'ftp:' or 'http:'" -msgstr "A]w榡 http:// άO ftp://" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Oriya" -msgstr "Suriname" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Add a new rule at the end" -msgstr "sW@Wh" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "LiLo and Bootsplash themes installation successful" -msgstr "lilo P}ieGɮפwgw˦\" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"You can also decide here whether printers on remote machines should be " -"automatically made available on this machine." -msgstr "" - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "" -"You may now provide options to module %s.\n" -"Options are in format ``name=value name2=value2 ...''.\n" -"For instance, ``io=0x300 irq=7''" -msgstr "" -"z{biHJn %s ҲըϥΪѼơC\n" -"Ѽƪ榡 \"name=value name2=value2 ...\"\n" -"Ҧpuio=0x300 irq=7v" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Quit without writing the partition table?" -msgstr "gJwФΪN}H" - -#: ../../mouse.pm:1 -#, c-format -msgid "Genius NetScroll" -msgstr "Genius NetScroll" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "On Hard Drive" -msgstr "w" - -#: ../../standalone.pm:1 -#, c-format -msgid "Installing packages..." -msgstr "bwˮM..." - -#: ../../keyboard.pm:1 -#, c-format -msgid "Dutch" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Angola" -msgstr "Angola" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "The following packages need to be installed:\n" -msgstr "UCMN|QwˤW" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "service setting" -msgstr "Aȳ]w" - -#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Custom" -msgstr "ۭq" - -#: ../../lang.pm:1 -#, c-format -msgid "Latvia" -msgstr "Latvia" - -#: ../../diskdrake/interactive.pm:1 -#, fuzzy, c-format -msgid "File is already used by another loopback, choose another one" -msgstr "ɮפwQΨӧ@L loopbackAпܨLɮ" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Read-only" -msgstr "" - -#: ../../security/help.pm:1 -#, c-format -msgid "" -"Enable/Disable name resolution spoofing protection. If\n" -"\"alert\" is true, also reports to syslog." -msgstr "" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "No known driver" -msgstr "LwXʵ{" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "1 MB" -msgstr "1 MB" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "" -"If it is not the one you want to configure, enter a device name/file name in " -"the input line" -msgstr "" -"UҦCXOϥΦ۰ʰҧ쪺LCYO쪺\n" -"äOAҹwAФʿJ˸mW/ɮצW" - -#: ../../standalone/draksound:1 -#, c-format -msgid "" -"No Sound Card has been detected on your machine. Please verify that a Linux-" -"supported Sound Card is correctly plugged in.\n" -"\n" -"\n" -"You can visit our hardware database at:\n" -"\n" -"\n" -"http://www.linux-mandrake.com/en/hardware.php3" -msgstr "" -"ثeztΰĥd˸mAнT{zĥdwTC\n" -"\n" -"\n" -"t~гsWڭ̪xdݸƮwA˵zĥdO_wg䴩G\n" -"\n" -"\n" -"http://www.linux-mandrake.com/en/hardware.php3" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Configure Local Area Network..." -msgstr "]wϰ..." - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Verify checksum of the suid/sgid files" -msgstr "" - -#: ../../services.pm:1 -#, c-format -msgid "Launch the sound system on your machine" -msgstr "bztΤWҰʭĪAȨt" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Run some checks against the rpm database" -msgstr "" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Execute" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Preparing printer database..." -msgstr "bdzƦL" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Information" -msgstr "T" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "No network card" -msgstr "Ld" - -#: ../../mouse.pm:1 -#, c-format -msgid "3 buttons" -msgstr "Tӫ" - -#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 -#, c-format -msgid "Which filesystem do you want?" -msgstr "znΨ@ɮרtΡH" - -#: ../../lang.pm:1 -#, c-format -msgid "Malta" -msgstr "Malta" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Detailed information" -msgstr "ԲӸT" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Printer default settings\n" -"\n" -"You should make sure that the page size and the ink type/printing mode (if " -"available) and also the hardware configuration of laser printers (memory, " -"duplex unit, extra trays) are set correctly. Note that with a very high " -"printout quality/resolution printing can get substantially slower." -msgstr "" -"w]L]w\n" -"\n" -"zݭnTwȱijpP]wTL~C\n" -"Ъ`N@UAϥΰ~CLɩҪOɶ|V[C" - -#: ../../install_any.pm:1 -#, c-format -msgid "This floppy is not FAT formatted" -msgstr "oiäO FAT 榡ƪϺФ" - -#: ../../network/ethernet.pm:1 ../../network/network.pm:1 -#, c-format -msgid "Configuring network" -msgstr "]w" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"This option will save files that have changed. Exact behavior depends on " -"whether incremental or differential mode is used." -msgstr "" - -#: ../../Xconfig/main.pm:1 -#, c-format -msgid "Graphic Card" -msgstr "ܥd" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Resizing Windows partition" -msgstr "bp Windows ɮרtΪ" - -#: ../../lang.pm:1 -#, c-format -msgid "Cameroon" -msgstr "Cameroon" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Provider dns 1 (optional)" -msgstr "ISP Ĥ@x dns (iοJ)" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "" -"You can now partition %s.\n" -"When you are done, don't forget to save using `w'" -msgstr "" -"zثen %s ΰ϶i湺ʧ@C\n" -"zɡAOѤFJ 'w' gJzܧ" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Saami (swedish/finnish)" -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1 -#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 -#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1 -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Close" -msgstr "" - -#: ../../help.pm:1 -#, c-format -msgid "" -"\"%s\": check the current country selection. If you are not in this\n" -"country, click on the \"%s\" button and choose another one. If your country\n" -"is not in the first list shown, click the \"%s\" button to get the complete\n" -"country list." -msgstr "" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Calendar" -msgstr "ƾ" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Restore Selected\n" -"Catalog Entry" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"To use a remote lpd printer, you need to supply the hostname of the printer " -"server and the printer name on that server." -msgstr "" -"pnϥλݪ lpd LAznwΨӴ\n" -"LAȪݦCLADW١AHΤɥX\n" -"LW١C" - -#: ../../lang.pm:1 -#, c-format -msgid "Iceland" -msgstr "Iceland" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Network & Internet Configuration" -msgstr "]w" - -#: ../../common.pm:1 -#, c-format -msgid "consolehelper missing" -msgstr "consolehelper {" - -#: ../../services.pm:1 -#, c-format -msgid "stopped" -msgstr "Ұ" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Whether the FPU has an irq vector" -msgstr "" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Ext2" -msgstr "Ext2" - -#: ../../ugtk2.pm:1 -#, c-format -msgid "Expand Tree" -msgstr "i}𪬵c" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "" -"The old \"%s\" driver is blacklisted.\n" -"\n" -"It has been reported to oops the kernel on unloading.\n" -"\n" -"The new \"%s\" driver'll only be used on next bootstrap." -msgstr "" - -#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Expert Mode" -msgstr "MaҦ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer options" -msgstr "Lﶵ" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Local Network adress" -msgstr "IP}" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup your System files. (/etc directory)" -msgstr "ƥztɮסC(/etc ؿ)" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "Set the user umask." -msgstr "ϥΪ" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"You now have the opportunity to download updated packages. These packages\n" -"have been updated after the distribution was released. They may\n" -"contain security or bug fixes.\n" -"\n" -"To download these packages, you will need to have a working Internet \n" -"connection.\n" -"\n" -"Do you want to install the updates ?" -msgstr "" -"buLinux DistributionvCjo@qɶA\n" -"tӳ|XץMѨϥΪ̦w˧sC\n" -"\n" -"z{bNoثe̷sMץ\n" -"TALeNOzsu]wwgL~\n" -"iH`ϥΡC\n" -"\n" -"znw˧sMܡH" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Samba Server" -msgstr "Samba A" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Australian Optus cable TV" -msgstr "ڧ Optus cable TV" - -#: ../../install_steps_newt.pm:1 -#, c-format -msgid "" -" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen " -msgstr " <Tab>/<Alt-Tab> bض | <Space> | <F12> Uӿù" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Subnet:" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Zimbabwe" -msgstr "Zimbabwe" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "When" -msgstr "ƥɶ]w" - -#: ../../network/adsl.pm:1 -#, c-format -msgid "" -"You need the Alcatel microcode.\n" -"Download it at:\n" -"%s\n" -"and copy the mgmt.o in /usr/share/speedtouch" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Hour" -msgstr "" - -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Second DNS Server (optional)" -msgstr "ĤGxDNSA (iJ)" - -#: ../../lang.pm:1 -#, c-format -msgid "Finland" -msgstr "Finland" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Color depth: %s\n" -msgstr "C`סG %s\n" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "You can't unselect this package. It must be upgraded" -msgstr "oӮM@wns~AziHoӮM" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Loading from floppy" -msgstr "bJnФ]w" - -#: ../../security/help.pm:1 -#, c-format -msgid "Enable/Disable the logging of IPv4 strange packets." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Slovenia" -msgstr "Slovenia" - -#: ../../standalone/mousedrake:1 -#, fuzzy, c-format -msgid "Mouse test" -msgstr "Mouse Systems" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "" -"Drakperm is used to see files to use in order to fix permissions, owners, " -"and groups via msec.\n" -"You can also edit your own rules which will owerwrite the default rules." -msgstr "" -"Drakperm {ϥΪ˵HέקﭫnɮתvA]t̡֦B\n" -"sյTCt~z]iHۦsгyhݩۭqWhءC" - -#: ../../any.pm:1 -#, c-format -msgid "" -"Enter a user\n" -"%s" -msgstr "" -"J@ϥΪ̱b\n" -"%s" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "" -"- PCI and USB devices: this lists the vendor, device, subvendor and " -"subdevice PCI/USB ids" -msgstr "" -"- PCI P USB ˸mGoCXFtӦW١A˸mWٻPݼtӵ PCI/USB IDS T" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "ProgressBar color selection" -msgstr "iפڦm" - -#: ../../any.pm:1 -#, c-format -msgid "" -"Here are the entries on your boot menu so far.\n" -"You can create additional entries or change the existing ones." -msgstr "" -"U٦@ǨLﶵAziHܷsW\n" -"קJﶵC" - -#: ../../help.pm:1 -#, c-format -msgid "/dev/hda" -msgstr "/dev/hda" - -#: ../../help.pm:1 -#, c-format -msgid "/dev/hdb" -msgstr "/dev/hdb" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "" -"Application Name\n" -"or Full Path:" -msgstr "" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Runs commands scheduled by the at command at the time specified when\n" -"at was run, and runs batch commands when the load average is low enough." -msgstr "atd Aȵ{AzbbROCwYӮɶYӵ{C" - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "Radio support:" -msgstr "Radio 䴩G" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Installing SANE packages..." -msgstr "bwˮM..." - -#: ../../any.pm:1 -#, c-format -msgid "LDAP" -msgstr "ϥ LDAP" - -#: ../../bootloader.pm:1 -#, c-format -msgid "SILO" -msgstr "SLILO" - -#: ../../diskdrake/removable.pm:1 -#, c-format -msgid "Change type" -msgstr "ܤΰϮ榡" - -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid ", USB printer #%s" -msgstr "AUSB L \\/*%s" - -#: ../../any.pm:1 -#, c-format -msgid "SILO Installation" -msgstr "SILO w" - -#: ../../install_messages.pm:1 -#, c-format -msgid "" -"Congratulations, installation is complete.\n" -"Remove the boot media and press return to reboot.\n" -"\n" -"\n" -"For information on fixes which are available for this release of Mandrake " -"Linux,\n" -"consult the Errata available from:\n" -"\n" -"\n" -"%s\n" -"\n" -"\n" -"Information on configuring your system is available in the post\n" -"install chapter of the Official Mandrake Linux User's Guide." -msgstr "" -"!! tΤwgwˡAШX}ЩκϤA\n" -"۫ Enter 䭫s}C\n" -"\n" -"\n" -"no Mandrake Linux Tε{ץTܡA\n" -"аѦ Mandrake qHε{ɻ~: \n" -"\n" -"%s\n" -"\n" -"\n" -"]wtΪTAziHb Mandrake Linux ϥ\n" -"U (Official Mandrake Linux User's Guide) ̭C" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "paranoid" -msgstr "ƨgA" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Do not send mails when unneeded" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Your scanner(s) will not be available on the network." -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Send mail report after each backup to:" -msgstr "bCƥoelqӨϥΪ̡G" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"This command you can also use in the \"Printing command\" field of the " -"printing dialogs of many applications. But here do not supply the file name " -"because the file to print is provided by the application.\n" -msgstr "" -"oӫO\Az]iHb\hε{CLܤ\n" -"yCLROzϥΥC\n" -"Oo䤣ѩҿתɮצW١A]ɮתCL\O\n" -"ε{ѡC\n" - -#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "Resolution" -msgstr "ѪR" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"To print to a SMB printer, you need to provide the SMB host name (Note! It " -"may be different from its TCP/IP hostname!) and possibly the IP address of " -"the print server, as well as the share name for the printer you wish to " -"access and any applicable user name, password, and workgroup information." -msgstr "" -"pnϥκھFLAznѥDڦW \n" -"(`N! oӦWٻP TCP/IP DW٥iäۦP)A\n" -"٥wCLA IP }BɥXӪL\n" -"W١BAϥΪ̱bPKXAHΤu@sժTC" - -#: ../../security/help.pm:1 -#, c-format -msgid "" -" Enabling su only from members of the wheel group or allow su from any user." -msgstr "" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "reconfigure" -msgstr "s]w" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "" -"Your card can have 3D hardware acceleration support with XFree %s,\n" -"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." -msgstr "" -"zܥdft XFree %s ҥ 3D w[t\C\n" -"OЪ`NAoOʽ誺䴩ءAӥBWi|wpC" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Shell timeout" -msgstr "֤߱ҰʮɶOɮɶ" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Xinetd Service" -msgstr "Xinetd A" - -#: ../../any.pm:1 -#, c-format -msgid "access to network tools" -msgstr "su" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Firmware-Upload for HP LaserJet 1000" -msgstr "" - -#: ../../share/advertising/03-software.pl:1 -#, c-format -msgid "" -"And, of course, push multimedia to its limits with the very latest software " -"to play videos, audio files and to handle your images or photos." -msgstr "" -"Mandrake Linux ѤFzɱohC骺ݨDA\n" -"ϥΪ̯iϤsB֪B[ݹq" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Here is a list of all auto-detected printers. " -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"Error installing aboot, \n" -"try to force installation even if that destroys the first partition?" -msgstr "" -"w aboot ɵoͿ~A\n" -"An_ۥi෴lĤ@ӤΰϪjpjAw˶ܡH" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Restore Selected\n" -"Files" -msgstr "" -"^s\n" -"ɮ" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"%s exists, delete?\n" -"\n" -"Warning: If you've already done this process you'll probably\n" -" need to purge the entry from authorized_keys on the server." -msgstr "" -"%s wgsbFAznRӶضܡH\n" -"\n" -"ĵiGYOzwgӤu@iסA]\ziHRӥDW\n" -"{ҾɮסC" - -#: ../../network/tools.pm:1 -#, c-format -msgid "Please fill or check the field below" -msgstr "бzJåBˬdU" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Do you want to save /etc/fstab modifications" -msgstr "zQnxs /etc/fstab ɮתקܡH" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Boot Protocol" -msgstr "qTw" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "LVM-disks %s\n" -msgstr "LVM Ϻ %s\n" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "The package %s is needed. Install it?" -msgstr "o %s MݭnwˤWAznw˸ӮMܡH" - -#: ../../services.pm:1 -#, c-format -msgid "On boot" -msgstr "}۰ʸJ" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Bus identification" -msgstr "yƴyz" - -#: ../../lang.pm:1 -#, fuzzy, c-format -msgid "Vatican" -msgstr "Ԧ" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Please make a backup of your data first" -msgstr "бzƥz" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "You have more than one hard drive, which one do you install linux on?" -msgstr "AtΤWhwХiѦw Linux tΡAzndzƨ@Ѧw˨ϥΡH" - -#: ../../lang.pm:1 -#, c-format -msgid "Eritrea" -msgstr "Eritrea" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Boot ISO" -msgstr "}Mɮ" - -#: ../../network/adsl.pm:1 -#, fuzzy, c-format -msgid "Firmware needed" -msgstr "ݭn" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Remove List" -msgstr "M" - -#: ../../share/advertising/05-desktop.pl:1 -#, c-format -msgid "A customizable environment" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Inuktitut" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Some protocols, like rsync, may be configured at the server end. Rather " -"than using a directory path, you would use the 'module' name for the service " -"path." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Morocco" -msgstr "Morocco" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Which printer model do you have?" -msgstr "zLݩثH" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Add a new printer" -msgstr "sWL" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid " All of your selected data have been " -msgstr " zҿҦƤwg " - -#: ../../lang.pm:1 -#, c-format -msgid "Nepal" -msgstr "Nepal" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "<-- Delete" -msgstr "<-- R" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "cpu # " -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "chunk size" -msgstr "նjp" - -#: ../../security/help.pm:1 -#, c-format -msgid "" -"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" -"\n" -"If set to NONE, no issues are allowed.\n" -"\n" -"Else only /etc/issue is allowed." -msgstr "" - -#: ../../security/help.pm:1 -#, c-format -msgid " Enable/Disable sulogin(8) in single user level." -msgstr "" - -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm:1 -#, c-format -msgid "commands before booting, or 'c' for a command-line." -msgstr "commands before booting, or 'c' for a command-line." - -#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 -#, c-format -msgid "Problems installing package %s" -msgstr "w %s MoͿ~" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "You will receive an alert if the load is higher than this value" -msgstr "tέtWLӼƭȮɡAzN|ĵܳq" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Add a scanner manually" -msgstr "ʿϥΪ" - -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Refresh" -msgstr "" - -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Reload partition table" -msgstr "JwФΪ" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Yes, I want autologin with this (user, desktop)" -msgstr "OAڻݭnγo (ϥΪ̡Bୱ) Ӧ۰ʵnJ" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Restore Selected" -msgstr "" -"^s\n" -"ɮ" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Search for fonts in installed list" -msgstr "ww˲M椺jMr" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "The Local Network did not finish with `.0', bailing out." -msgstr "ӰϰäOH .0 A..." - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Boot" -msgstr "Ұ" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid " and the CD is in the drive" -msgstr "" - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "Tuner type:" -msgstr "Tuner G" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Now, it's time to select a printing system for your computer. Other OSs may\n" -"offer you one, but Mandrake Linux offers two. Each of the printing system\n" -"is best suited to particular types of configuration.\n" -"\n" -" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n" -"if you have a direct connection to your printer, you want to be able to\n" -"panic out of printer jams, and you do not have networked printers. (\"%s\"\n" -"will handle only very simple network cases and is somewhat slow when used\n" -"with networks.) It's recommended that you use \"pdq\" if this is your first\n" -"experience with GNU/Linux.\n" -"\n" -" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n" -"printing to your local printer or to one halfway around the planet. It is\n" -"simple to configure and can act as a server or a client for the ancient\n" -"\"lpd \" printing system, so it compatible with older operating systems\n" -"which may still need print services. While quite powerful, the basic setup\n" -"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n" -"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n" -"front-ends for printing or choosing printer options and for managing the\n" -"printer.\n" -"\n" -"If you make a choice now, and later find that you don't like your printing\n" -"system you may change it by running PrinterDrake from the Mandrake Control\n" -"Center and clicking the expert button." -msgstr "" -"o̱NnܩҭnϥΪCLAȨtζءAMandrake Linux o䴣ѤFTبѱz" -"ءC\n" -"\n" -" *y%sz- pdq NOuprint, don't queuevYgC@oӦCLAȵ{" -"bLOs쥻qWܧֳtCLAt~bp²AӥBtפ֪" -"WӨϥΤ]۷KQCoӶءA]tUiѿܪCLtΡAiHƫϥ " -"PrinterDrake {AMϥαMaҦNiHܧ]wC\n" -"\n" -" *y%sz - uCommon Unix Printing SystemvAoO@MӬ۷nCLAȨtΡA" -"suw˦bWAΪ̬O@ϥΤW۷CoӪAȵ{۷²" -"A]Ψϥ lpd Server ݩΪ̬O Client ݳۮeϥΡCoӵ{" -"\h\Aϥγ]wW]Oupdqv{²CpGzƱ CUPS " -"ulpdvAȵ{\ܡAzݭn}ҡucups-lpdvoӪAȵ{Ct~A" -"ѤFϧΪϥΪ̿ܭnCLLA]tCLѼƪվC" - -#: ../../keyboard.pm:1 -#, c-format -msgid "\"Menu\" key" -msgstr "\"\" " - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"\n" -"Please check whether Printerdrake did the auto-detection of your printer " -"model correctly. Find the correct model in the list when a wrong model or " -"\"Raw printer\" is highlighted." -msgstr "" -"\n" -"\n" -"˵ PrinterDrake {Ҧ۰ʰ쪺LO_TC\n" -"z]iHM˵ULMC" - -#: ../../standalone/draksec:1 -#, c-format -msgid "Security Administrator:" -msgstr "wʺz:" - -#: ../../security/help.pm:1 -#, c-format -msgid "Set the shell timeout. A value of zero means no timeout." -msgstr "" - -#: ../../network/tools.pm:1 -#, c-format -msgid "Firmware copy succeeded" -msgstr "" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, check permissions of files in the users' home." -msgstr "" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "" -"You don't have an Internet connection.\n" -"Create one first by clicking on 'Configure'" -msgstr "" -"z٨S Internet su]wCХI\n" -"]wsӫإߤ@ Internet su]we" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Fonts copy" -msgstr "rƻs" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Automated" -msgstr "۰ʤ" - -#: ../../Xconfig/test.pm:1 -#, c-format -msgid "Do you want to test the configuration?" -msgstr "zQnձz]wȶܡH" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" -"GIMP." -msgstr "wg\N Star Office/OpenOffice.org/GIMP L \"%s\" C" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Save packages selection" -msgstr "xsҿɮ" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "/_Actions" -msgstr "" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "Remove the last item" -msgstr "e" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "User list to restore (only the most recent date per user is important)" -msgstr "^sϥΪ̲M (u^s̪ϥΪ̭nɮ)" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "No net boot images created!" -msgstr "åإߺ}M" - -#: ../../network/adsl.pm:1 -#, c-format -msgid "use pptp" -msgstr "ϥ pptp" - -#: ../../services.pm:1 -#, c-format -msgid "Choose which services should be automatically started at boot time" -msgstr "ܧƱbU@}ɱҰʪAȵ{" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Check files/directories writable by everybody" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Learn how to use this printer" -msgstr "AѦpϥγoxL" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Configure the network now" -msgstr "ߧY]w" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Choose a mirror from which to get the packages" -msgstr "nΨӧ{Mɪ FTP Mgx" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "" -"The FAT resizer is unable to handle your partition, \n" -"the following error occured: %s" -msgstr "" -"Lkվ FAT ΰϪjpAoͤFU~:\n" -"%s" - -#: ../../install_steps_gtk.pm:1 -#, fuzzy, c-format -msgid "Size: " -msgstr "jpG %s" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Which sector do you want to move it to?" -msgstr "znʨ쨺ӺϰϡH" - -#: ../../lang.pm:1 -#, c-format -msgid "Bahamas" -msgstr "Bahamas" - -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "Do you want to click on this button?" -msgstr "znoӫsܡH" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Manual configuration" -msgstr "ʲպA]w" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "search" -msgstr "M" - -#: ../../services.pm:1 -#, c-format -msgid "" -"This package loads the selected keyboard map as set in\n" -"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" -"You should leave this enabled for most machines." -msgstr "" -"oӪAȶرN|J\n" -"/etc/sysconfig/keyboard\n" -"ɮתL]wպAC\n" -"ziHƫϥ kdbconfig {ӳ]wC\n" -"@ӻAثejäݭnoӶءC" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Xpmac (installation display driver)" -msgstr "Xpmac (ܥdXʵ{w)" - -#: ../../network/ethernet.pm:1 ../../network/network.pm:1 -#, c-format -msgid "Zeroconf host name must not contain a ." -msgstr "" - -#: ../../security/help.pm:1 -#, c-format -msgid " Accept/Refuse icmp echo." -msgstr "" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Syslog is the facility by which many daemons use to log messages\n" -"to various system log files. It is a good idea to always run syslog." -msgstr "" -"syslog Aȵ{tγ\hAȵ{άɮרӦ^t\n" -"ҵoͤ@ǨƱCijz@wnҰ syslog Aȵ{" - -#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1 -#, c-format -msgid "Unknown/Others" -msgstr "|@" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "No TV Card detected!" -msgstr "tΰqdI" - -#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1 -#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 -#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1 -#, c-format -msgid "Options" -msgstr "ﶵ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "The printer \"%s\" is set as the default printer now." -msgstr "oxL \"%s\" N|Q]ww]LC" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"You are configuring an OKI laser winprinter. These printers\n" -"use a very special communication protocol and therefore they work only when " -"connected to the first parallel port. When your printer is connected to " -"another port or to a print server box please connect the printer to the " -"first parallel port before you print a test page. Otherwise the printer will " -"not work. Your connection type setting will be ignored by the driver." -msgstr "" -"zثeO]wϥ OKI pgLءCoL\n" -"ϥΤ@ثܯSǿ鷾qwA]oL@wn\n" -"w˦bqĤ@ӳsmW~`u@C\n" -"ҥH{bбzTwzثeLwgTawmb\n" -"Ĥ@ӳsWAHK~bCLխeC\n" -"_hCL\N|Lk`u@C" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "generation of the cpu (eg: 8 for PentiumIII, ...)" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Auto-detected" -msgstr "۰ʰ" - -#: ../../standalone/drakpxe:1 -#, fuzzy, c-format -msgid "" -"You are about to configure your computer to install a PXE server as a DHCP " -"server\n" -"and a TFTP server to build an installation server.\n" -"With that feature, other computers on your local network will be installable " -"using this computer as source.\n" -"\n" -"Make sure you have configured your Network/Internet access using drakconnect " -"before going any further.\n" -"\n" -"Note: you need a dedicated Network Adapter to set up a Local Area Network " -"(LAN)." -msgstr "" -"ثeniInternetsuɪ]wAoӥ\\n" -"LϰqzLoxDWe\n" -"sW InternetCЪ`N: zݭnt~@idHK\n" -"ѰϰqsusɨϥΡC" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "" -"OSS (Open Sound System) was the first sound API. It's an OS independent " -"sound API (it's available on most UNIX(tm) systems) but it's a very basic " -"and limited API.\n" -"What's more, OSS drivers all reinvent the wheel.\n" -"\n" -"ALSA (Advanced Linux Sound Architecture) is a modularized architecture " -"which\n" -"supports quite a large range of ISA, USB and PCI cards.\n" -"\n" -"It also provides a much higher API than OSS.\n" -"\n" -"To use alsa, one can either use:\n" -"- the old compatibility OSS api\n" -"- the new ALSA api that provides many enhanced features but requires using " -"the ALSA library.\n" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"No free space for 1MB bootstrap! Install will continue, but to boot your " -"system, you'll need to create the bootstrap partition in DiskDrake" -msgstr "" -"SiΪŶw˶}z{! w٬O|~AOzݭnϥζ}~" -"TҰʨtΡC" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "" -"Please choose the printer you want to set up or enter a device name/file " -"name in the input line" -msgstr "пܱzLsAΪ̬OJӸ˸mW" - -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Refuse" -msgstr "ڵ" - -#: ../../standalone/draksec:1 -#, c-format -msgid "LOCAL" -msgstr "" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "HFS" -msgstr "HFS" - -#: ../../services.pm:1 -#, c-format -msgid "" -"HardDrake runs a hardware probe, and optionally configures\n" -"new/changed hardware." -msgstr "" -"HardDrake {|iw鰻ʧ@AHK]ws[JΪ̬OܧL\n" -"g˸mC" - -#: ../../fs.pm:1 -#, c-format -msgid "Creating and formatting file %s" -msgstr "إߨî榡ɮ %s" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, check additions/removals of sgid files." -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"The HP LaserJet 1000 needs its firmware to be uploaded after being turned " -"on. Download the Windows driver package from the HP web site (the firmware " -"on the printer's CD does not work) and extract the firmware file from it by " -"uncompresing the self-extracting '.exe' file with the 'unzip' utility and " -"searching for the 'sihp1000.img' file. Copy this file into the '/etc/" -"printer' directory. There it will be found by the automatic uploader script " -"and uploaded whenever the printer is connected and turned on.\n" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Choose an existing LVM to add to" -msgstr "n[JϺа}C" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "xfs restart" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"The printer \"%s\" already exists,\n" -"do you really want to overwrite its configuration?" -msgstr "" -"ox \"%s\" LwgsbFA\n" -"zTwnл\oxLպA]wܡH" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Use the scanners on hosts: " -msgstr "" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Unselected All" -msgstr "Ҧ" - -#: ../../install_steps_interactive.pm:1 ../../network/tools.pm:1 -#, c-format -msgid "No partition available" -msgstr "䤣iΪΰ" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Printer Management \n" -msgstr "sLW" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Domain Name Resolver" -msgstr "WٸѪR" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Encryption key (again)" -msgstr "AJ[K_" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Samba share name missing!" -msgstr "Samba ɪW٨Sw !" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "True Type install done" -msgstr "True Type rw˧" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Detection in progress" -msgstr "b" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Build Whole Kernel -->" -msgstr "إ߾Ӯ֤ -->" - -#: ../../network/netconnect.pm:1 -#, fuzzy, c-format -msgid "modem" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Welcome to %s" -msgstr "wӨ %s" - -#: ../../standalone/drakhelp:1 -#, c-format -msgid "" -" drakhelp 0.1\n" -"Copyright (C) 2003 MandrakeSoft.\n" -"This is free software and may be redistributed under the terms of the GNU " -"GPL.\n" -"\n" -"Usage: \n" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Please insert the Update Modules floppy in drive %s" -msgstr "Цb %s ϺоJ@i]tsҲոƪϺФ" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Bootsplash" -msgstr "}Ϥ" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "" -"The following printer\n" -"\n" -"%s%s\n" -"is directly connected to your system" -msgstr "" -"\n" -"ثe@xLw˦bzWC" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Printer sharing on hosts/networks: " -msgstr "ɮפ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"The \"%s\" command also allows to modify the option settings for a " -"particular printing job. Simply add the desired settings to the command " -"line, e. g. \"%s <file>\". " -msgstr "" -"\n" -"u%svOAzקYӳ]wCLu@تѼƳ]wC\n" -"²@I覡NObROC[WznJ]wȡAu%s <ɮ>vC " - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "" -"In some cases, the %s driver needs to have extra information to work\n" -"properly, although it normally works fine without them. Would you like to " -"specify\n" -"extra options for it or allow the driver to probe your machine for the\n" -"information it needs? Occasionally, probing will hang a computer, but it " -"should\n" -"not cause any damage." -msgstr "" -"MjɭԤݭnB~ѼơAiOǮɭ %s X\n" -"{ݭn[W@ǰѼƤ~ॿ`B@FznwB~ѼƵ\n" -"Xʵ{A٬O{ۦ氻w]wO? ɭԦ۰ʰ\n" -"|qALӤܩyˮ`~C" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Not the correct CD label. Disk is labelled %s." -msgstr "T CD ҡAϺмҦW٬ %sC" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"- Daemon, %s via:\n" -msgstr "" -"\n" -"- Daemon (%s) Aȵ{]t :\n" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"Welcome to the Internet Connection Sharing utility!\n" -"\n" -"%s\n" -"\n" -"Click on Configure to launch the setup wizard." -msgstr "" -"wӨ Internet suɳ]wuI\n" -"\n" -"%s\n" -"\n" -"I]wӱҰʳ]wFC" - -#: ../../lang.pm:1 -#, c-format -msgid "Cuba" -msgstr "Cuba" - -# calendar/gui/goto-dialog.glade.h:13 -#: ../../standalone/drakbackup:1 -#, c-format -msgid "October" -msgstr "10" - -#: ../../lang.pm:1 -#, c-format -msgid "Belize" -msgstr "Belize" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Searching for new printers..." -msgstr "iΪL" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid " (multi-session)" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Kernel Boot Timeout" -msgstr "֤߱ҰʮɶOɮɶ" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "" -"Your card can have 3D hardware acceleration support but only with XFree %s.\n" -"Your card is supported by XFree %s which may have a better support in 2D." -msgstr "" -"zܥd䴩 3D [t\AOutX XFree %s ~o@ΡC\n" -"zܥdtX XFree %s b 2D ܤW|nįC" - -#: ../../security/help.pm:1 -#, c-format -msgid " Activate/Disable daily security check." -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\t-CD-R.\n" -msgstr "\t-о\n" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Enable libsafe if libsafe is found on the system" -msgstr "" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "The DrakX Partitioning wizard found the following solutions:" -msgstr "DrakX κFFUiΪѨMסG" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Hungarian" -msgstr "IQ" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "" -"Select your provider.\n" -"If it isn't listed, choose Unlisted." -msgstr "" -"ܱz ISP tӡC\n" -"pGèS]tbM椺AпܥCbM椺" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Automatic time synchronization (using NTP)" -msgstr "۰ʳzL NTP AȮծ" - -#: ../../network/adsl.pm:1 -#, fuzzy, c-format -msgid "Use my Windows partition" -msgstr "bp Windows ɮרtΪ" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "8 MB" -msgstr "8 MB" - -#: ../../any.pm:1 -#, c-format -msgid "LDAP Server" -msgstr "LDAP AD" - -#: ../../services.pm:1 -#, c-format -msgid "" -"PCMCIA support is usually to support things like ethernet and\n" -"modems in laptops. It won't get started unless configured so it is safe to " -"have\n" -"it installed on machines that don't need it." -msgstr "" -"PCMCIA 䴩A@OΨOqdBModem Xʩҳ]pC\n" -"@ӻAnB~]wn PCMCIA ~|uҰ PCMCIA AȡA]\n" -"NOtΤݭnoӥ\AwҰʥL]|vTC" - -#: ../../network/tools.pm:1 -#, c-format -msgid "Choose your country" -msgstr "ܱzaΦa" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"- System Files:\n" -msgstr "" -"\n" -"- tɮ:\n" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Standalone Tools" -msgstr "@u" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Where" -msgstr "ƥxsm]w" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "but not matching" -msgstr "O۰t" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "" -"Here you can select an alternative driver (either OSS or ALSA) for your " -"sound card (%s)." -msgstr "ziHܨϥ OSS Ϊ ALSA ĥdXʵ{ؤuzĥdϥ (%s)" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Configuring PCMCIA cards..." -msgstr "b]w PCMCIA d..." - -#: ../../common.pm:1 -#, c-format -msgid "kdesu missing" -msgstr "kdesu {F" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "%s: %s requires a username...\n" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Encryption key" -msgstr "[K_" - -#: ../../mouse.pm:1 -#, c-format -msgid "Microsoft IntelliMouse" -msgstr "Microsoft IntelliMouse" - -#: ../../keyboard.pm:1 -#, c-format -msgid "" -"This setting will be activated after the installation.\n" -"During installation, you will need to use the Right Control\n" -"key to switch between the different keyboard layouts." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Christmas Island" -msgstr "Christmas Island" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Installation of bootloader failed. The following error occured:" -msgstr "}{w˥ѡAoͦpU~G" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "EIDE/SCSI channel" -msgstr "EIDE/SCSI qD" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Set this printer as the default" -msgstr "ϥγoxLw]L" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Verify that %s is the correct path" -msgstr "oˤlTܡH" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "partition %s" -msgstr "ΰ %s" - -#: ../../security/level.pm:1 -#, c-format -msgid "Paranoid" -msgstr "YK" - -#: ../../any.pm:1 -#, c-format -msgid "NIS" -msgstr "ϥ NIS" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "<-- Del User" -msgstr "<-- RϥΪ" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Location on the bus" -msgstr "yƤWm" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "No printer found!" -msgstr "䤣LI" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "the vendor name of the device" -msgstr "˸mtӦW" - -#: ../../help.pm:1 ../../install_interactive.pm:1 -#, c-format -msgid "Erase entire disk" -msgstr "RҦϺФe" - -#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid " (Default)" -msgstr " (w]})" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Automatic reconfiguration" -msgstr "۰ʭs]w" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Receiving Speed:" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Turks and Caicos Islands" -msgstr "Turks and Caicos Islands" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "No Ip" -msgstr "" - -#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 -#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 -#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 -#, c-format -msgid "<- Previous" -msgstr "<- W@B" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Transfer Now" -msgstr "" -" ǰe \n" -"{b" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Set root password and network authentication methods" -msgstr "" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Internet Connection Sharing configuration" -msgstr "Internet suɳ]w" - -#: ../../ugtk2.pm:1 -#, c-format -msgid "Toggle between flat and group sorted" -msgstr "O_̷Ӹsըӥ[HƧ" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Themes" -msgstr "G" - -#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Options: %s" -msgstr "ﶵG %s" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "" -"You are currently using %s as your boot manager.\n" -"Click on Configure to launch the setup wizard." -msgstr "" -"AثeO %s @zثe}z{C\n" -"ziHI]wӱҰʳ]wF" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "OKI winprinter configuration" -msgstr "OKI Windows L]w" - -#: ../../lang.pm:1 -#, c-format -msgid "Saint Helena" -msgstr "Saint Helena" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "Parallel port #%s" -msgstr "æCW \\/*%s" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Security Level" -msgstr "wh" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"Some steps are not completed.\n" -"\n" -"Do you really want to quit now?" -msgstr "" -"٦ǨBJSA\n" -"\n" -"zTwnw˵{H" - -#: ../../lang.pm:1 -#, c-format -msgid "Sudan" -msgstr "Sudan" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Polish (qwertz layout)" -msgstr "i (qwertz tm)" - -#: ../../lang.pm:1 -#, fuzzy, c-format -msgid "Syria" -msgstr "Suriname" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " -"LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), " -"an HP PhotoSmart or an HP LaserJet 2200?" -msgstr "" - -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#: ../../bootloader.pm:1 -#, c-format -msgid "" -"Welcome to %s the operating system chooser!\n" -"\n" -"Choose an operating system from the list above or\n" -"wait %d seconds for default boot.\n" -"\n" -msgstr "" -"Welcome to %s the operating system chooser!\n" -"\n" -"Choose an operating system from the list above or\n" -"wait %d seconds for default boot.\n" -"\n" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Portuguese" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Loopback file name: " -msgstr "Loopback ɮצW١G " - -#: ../../network/network.pm:1 -#, c-format -msgid "DNS server address should be in format 1.2.3.4" -msgstr "DNS IP }n 1.2.3.4 榡ӿJ" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Left Control key" -msgstr "ݦL" - -#: ../../lang.pm:1 -#, fuzzy, c-format -msgid "Serbia" -msgstr "ǦC" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Newzealand" -msgstr "" - -#: ../../fsedit.pm:1 -#, c-format -msgid "This directory should remain within the root filesystem" -msgstr "oӥؿөb / ɮרtΤ~" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Across Network" -msgstr "zL" - -#: ../../keyboard.pm:1 -#, c-format -msgid "CapsLock key" -msgstr "CapsLock " - -#: ../../steps.pm:1 -#, c-format -msgid "Install bootloader" -msgstr "w˶}{" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Select the memory size of your graphics card" -msgstr "]wܥdWøϰOjp" - -#: ../../security/help.pm:1 -#, c-format -msgid "" -"Enable/Disable crontab and at for users.\n" -"\n" -"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" -"and crontab(1))." -msgstr "" - -#: ../../standalone.pm:1 -#, c-format -msgid "" -"[OPTIONS]\n" -"Network & Internet connection and monitoring application\n" -"\n" -"--defaultintf interface : show this interface by default\n" -"--connect : connect to internet if not already connected\n" -"--disconnect : disconnect to internet if already connected\n" -"--force : used with (dis)connect : force (dis)connection.\n" -"--status : returns 1 if connected 0 otherwise, then exit.\n" -"--quiet : don't be interactive. To be used with (dis)connect." -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Dynamic IP Address Pool:" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "LVM name?" -msgstr "LVM W١H" - -#: ../../standalone/service_harddrake:1 -#, c-format -msgid "Some devices in the \"%s\" hardware class were removed:\n" -msgstr " \"%s\" wOؤwgG\n" - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "Found %s %s interfaces" -msgstr " %s %s " - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Post Install" -msgstr "w˳]w" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "The internal domain name" -msgstr "쪺W" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Card IRQ" -msgstr "d IRQ" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "logdrake" -msgstr "logdrake" - -#: ../../standalone.pm:1 -#, c-format -msgid "" -"Font Importation and monitoring " -"application \n" -"--windows_import : import from all available windows partitions.\n" -"--xls_fonts : show all fonts that already exist from xls\n" -"--strong : strong verification of font.\n" -"--install : accept any font file and any directry.\n" -"--uninstall : uninstall any font or any directory of font.\n" -"--replace : replace all font if already exist\n" -"--application : 0 none application.\n" -" : 1 all application available supported.\n" -" : name_of_application like so for staroffice \n" -" : and gs for ghostscript for only this one." -msgstr "" - -#: ../../standalone.pm:1 -#, c-format -msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Choose the floppy drive you want to use to make the bootdisk" -msgstr "ܭnΨӻs@}Ϥnо" - -#: ../../bootloader.pm:1 ../../help.pm:1 -#, c-format -msgid "LILO with text menu" -msgstr "r LILO {" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "Everything (no firewall)" -msgstr " (]t firewall)" - -#: ../../any.pm:1 -#, c-format -msgid "You must specify a kernel image" -msgstr "zݭnw@Ӯ֤߶}ɮ" - -#: ../../printer/main.pm:1 -#, c-format -msgid ", multi-function device on USB" -msgstr "A USB h\˸m" - -#: ../../interactive/newt.pm:1 -#, fuzzy, c-format -msgid "Do" -msgstr "VU" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Contacting the mirror to get the list of available packages..." -msgstr "V FTP MgxdߥiΪ{MC" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Lithuanian AZERTY (old)" -msgstr "߳{ ( AZERTY )" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Brazilian (ABNT-2)" -msgstr "ڦ (ABNT-2)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "IP address of host/network:" -msgstr "" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "" -"the progress bar y coordinate\n" -"of its upper left corner" -msgstr " WiBar y b " - -#: ../../install_gtk.pm:1 -#, c-format -msgid "System installation" -msgstr "tΦw" - -#: ../../lang.pm:1 -#, c-format -msgid "Saint Vincent and the Grenadines" -msgstr "Saint Vincent and the Grenadines" - -#: ../../security/help.pm:1 -#, c-format -msgid "Allow/Forbid reboot by the console user." -msgstr "" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "/File/_Open" -msgstr "/ɮ/} (_O)" - -#: ../../standalone/drakpxe:1 -#, fuzzy, c-format -msgid "Location of auto_install.cfg file" -msgstr "bs@۰ʦw˺Ϥ" - -#: ../../any.pm:1 -#, c-format -msgid "Open Firmware Delay" -msgstr "} Firmware Delay" - -#: ../../lang.pm:1 -#, c-format -msgid "Hungary" -msgstr "Hungary" - -#: ../../lang.pm:1 -#, c-format -msgid "New Zealand" -msgstr "New Zealand" - -#: ../../standalone/net_monitor:1 -#, fuzzy, c-format -msgid "Color configuration" -msgstr "ĵܳ]w" - -#: ../../security/level.pm:1 -#, c-format -msgid "" -"There are already some restrictions, and more automatic checks are run every " -"night." -msgstr "]tFsAHΨCwtν]ˬdʧ@C" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "please choose the date to restore" -msgstr "пn^s" - -#: ../../lang.pm:1 -#, c-format -msgid "Netherlands Antilles" -msgstr "Netherlands Antilles" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Switching from ext2 to ext3" -msgstr " ext2 b ext3" - -#: ../../printer/data.pm:1 -#, c-format -msgid "LPRng" -msgstr "LPRng" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Browse to new restore repository." -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"Welcome to the Printer Setup Wizard\n" -"\n" -"This wizard allows you to install local or remote printers to be used from " -"this machine and also from other machines in the network.\n" -"\n" -"It asks you for all necessary information to set up the printer and gives " -"you access to all available printer drivers, driver options, and printer " -"connection types." -msgstr "" -"\n" -"wӨL]wF\n" -"\n" -"]wFN|azaݥHλݦL]wC\n" -"\n" -"]wL{AШ̴ܿܬءA]tLB\n" -"B~ѼƵC" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "and %d unknown printers" -msgstr "" -"\n" -"P %d xL " - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "" -"Early Intel Pentium chips manufactured have a bug in their floating point " -"processor which did not achieve the required precision when performing a " -"Floating point DIVision (FDIV)" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Backup quota exceeded!\n" -"%d MB used vs %d MB allocated." -msgstr "" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "No ISDN PCI card found. Please select one on the next screen." -msgstr "䤣 ISDN PCI dAЦbU@ӿùʿܤ@iC" - -#: ../../common.pm:1 -#, c-format -msgid "GB" -msgstr "GB" - -#: ../../any.pm:1 -#, c-format -msgid "Please give a user name" -msgstr "пJϥΪ̱b" - -#: ../../any.pm:1 -#, c-format -msgid "Enable CD Boot?" -msgstr "\ CD }H" - -#: ../../interactive/stdio.pm:1 -#, c-format -msgid " enter `void' for void entry" -msgstr "JuvoidvܪŪ" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backups on unmountable media - Use Catalog to restore" -msgstr "" - -# calendar/gui/goto-dialog.glade.h:7 -#: ../../standalone/drakbackup:1 -#, c-format -msgid "January" -msgstr "1" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Password history length" -msgstr "JKX²F" - -#: ../../network/netconnect.pm:1 -#, fuzzy, c-format -msgid "Winmodem connection" -msgstr "@ modem su覡" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"Congratulations, your printer is now installed and configured!\n" -"\n" -"You can print using the \"Print\" command of your application (usually in " -"the \"File\" menu).\n" -"\n" -"If you want to add, remove, or rename a printer, or if you want to change " -"the default option settings (paper input tray, printout quality, ...), " -"select \"Printer\" in the \"Hardware\" section of the Mandrake Control " -"Center." -msgstr "" -"\n" -"ߡIL]wwgC\n" -"\n" -"YOzƫݭnsWBRBsRWL]wܡA\n" -"Цb Mandrake xܡywzAܡyLz\n" -"Yii]wʧ@C" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Now, you can run xawtv (under X Window!) !\n" -msgstr "Az{biHb X U xawtv {FI\n" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Not enough swap space to fulfill installation, please add some" -msgstr "SOiHΨӧw˧@~AмW[mŶ" - -#. -PO: example: lilo-graphic on /dev/hda1 -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "%s on %s" -msgstr "s" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "Allow/Forbid remote root login." -msgstr "(oӾW)" - -#: ../../help.pm:1 -#, c-format -msgid "" -"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" -"local time according to the time zone you selected. If the clock on your\n" -"motherboard is set to local time, you may deactivate this by unselecting\n" -"\"%s\", which will let GNU/Linux know that the system clock and the\n" -"hardware clock are in the same timezone. This is useful when the machine\n" -"also hosts another operating system like Windows.\n" -"\n" -"The \"%s\" option will automatically regulate the clock by connecting to a\n" -"remote time server on the Internet. For this feature to work, you must have\n" -"a working Internet connection. It is best to choose a time server located\n" -"near you. This option actually installs a time server that can used by\n" -"other machines on your local network as well." -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Which is your timezone?" -msgstr "zɰϬ ?" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Can't create log file!" -msgstr "Lkإ catalog T" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Use .backupignore files" -msgstr "ƥɮױҥγ̤jeqtC" - -#: ../../lang.pm:1 -#, c-format -msgid "Guinea" -msgstr "Guinea" - -#: ../../network/tools.pm:1 -#, fuzzy, c-format -msgid "The system is now connected to the Internet." -msgstr "tΥثewgsW Internet FC" - -#: ../../lang.pm:1 -#, fuzzy, c-format -msgid "South Georgia and the South Sandwich Islands" -msgstr "South Georgia and the South Sandwich Island" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Japan (broadcast)" -msgstr "饻 (broascast)" - -#: ../../help.pm:1 -#, c-format -msgid "" -"Monitor\n" -"\n" -" The installer will normally automatically detect and configure the\n" -"monitor connected to your machine. If it is incorrect, you can choose from\n" -"this list the monitor you actually have connected to your computer." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Mozambique" -msgstr "Mozambique" - -#: ../../any.pm:1 -#, c-format -msgid "Icon" -msgstr "ϥ" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Please choose what you want to backup" -msgstr "пznƥ" - -#: ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "256 colors (8 bits)" -msgstr "256 (8 줸)" - -#: ../../any.pm:1 -#, c-format -msgid "Read-write" -msgstr "/ iŪg" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Size: %s\n" -msgstr "jpG %s\n" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Hostname: " -msgstr "DW١G" - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Add a rule" -msgstr "sWWh" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Chunk size %s\n" -msgstr "նjp %s\n" - -#: ../../share/advertising/02-community.pl:1 -#, c-format -msgid "Build the future of Linux!" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Local Printer" -msgstr "L" - -#: ../../network/tools.pm:1 -#, fuzzy, c-format -msgid "Floppy access error, unable to mount device %s" -msgstr "znoӸ˸m %s b ?" - -#: ../../standalone.pm:1 -#, c-format -msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "ADSL connection" -msgstr "ADSL su" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "No configuration, please click Wizard or Advanced.\n" -msgstr "|]wպAءAIFΪ̬OiҦإߤC\n" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "Error!" -msgstr "~I" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "cable connection detected" -msgstr " cable su" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Permission denied transferring %s to %s" -msgstr " %s ǿ %s oͿ~Avڵ" - -#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 -#, c-format -msgid "/_Report Bug" -msgstr "/i~ (_R)" - -#: ../../lang.pm:1 -#, c-format -msgid "Dominica" -msgstr "Dominica" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Resize" -msgstr "ܧjp" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Resolution: %s\n" -msgstr "ѪRסG %s\n" - -#: ../../install2.pm:1 -#, c-format -msgid "" -"Can't access kernel modules corresponding to your kernel (file %s is " -"missing), this generally means your boot floppy in not in sync with the " -"Installation medium (please create a newer boot floppy)" -msgstr "" -"䤣ثez֤ߤYXʵ{Ҳɮ (%s)A]\AΨӶ}ѪϤ" -"DAOϥª Mandrake }MɮסAӤO MandrakeѪ}M" -"ɮסCЭss@HKiUʧ@)" - -#: ../../help.pm:1 -#, c-format -msgid "" -"Please select the correct port. For example, the \"COM1\" port under\n" -"Windows is named \"ttyS0\" under GNU/Linux." -msgstr "" -"пܥTsW١CAMS Windows Һ٩IuCOM1vA\n" -"b GNU/Linux ҬO٩IuttyS0vC" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "The following packages are going to be removed" -msgstr "UCMN|Q" - -#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1 -#, c-format -msgid "Connect to the Internet" -msgstr "su Internet" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Use existing partitions" -msgstr "ϥΤwgsbΰ" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Canadian (Quebec)" -msgstr "[j (_J)" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Mouse device: %s\n" -msgstr "ƹsmG %s\n" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Reselect correct fonts" -msgstr "sTr" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Options\n" -"\n" -" Here you can choose whether you want to have your machine automatically\n" -"switch to a graphical interface at boot. Obviously, you want to check\n" -"\"%s\" if your machine is to act as a server, or if you were not successful\n" -"in getting the display configured." -msgstr "" -"̫᪺ɭԡAAӷ|ݨ߰ݱzO_nb}\n" -"iJϧεnJC@ڭ̫ijAYOzq\n" -"OΨӷ@AϥΪܡAoӶإiHܡy_zA\n" -"]@ Server Aä] X ҰGUIϧ\n" -"n{C" - -#: ../../share/advertising/13-mdkexpert_corporate.pl:1 -#, c-format -msgid "MandrakeExpert Corporate" -msgstr "MandrakeExprt ´" - -#: ../../standalone.pm:1 -#, c-format -msgid "" -" [everything]\n" -" XFdrake [--noauto] monitor\n" -" XFdrake resolution" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "Write protection" -msgstr "L۰ʰ" - -#: ../../standalone/drakfont:1 -#, fuzzy, c-format -msgid "You've not selected any font" -msgstr "䤣rC\n" - -#: ../../steps.pm:1 -#, c-format -msgid "Language" -msgstr "ܻyt" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer model selection" -msgstr "L" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"After changing type of partition %s, all data on this partition will be lost" -msgstr "ܤΰ %s 榡HAҦboӤΰϤWƳ|QM" - -#: ../../common.pm:1 -#, c-format -msgid "%d seconds" -msgstr "%d " - -#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 -#, c-format -msgid "Insert a blank floppy in drive %s" -msgstr "Цb %s J@ťպϤ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "A valid URI must be entered!" -msgstr "J㪺 URI }I" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "Found \"%s\" interface do you want to use it ?" -msgstr "" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Re-configure interface and DHCP server" -msgstr "s]wӺP DHCP A" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "Sound configuration" -msgstr "IJպA" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Photo test page" -msgstr "ϧΦCLխ" - -#: ../../help.pm:1 ../../install_interactive.pm:1 -#, c-format -msgid "Custom disk partitioning" -msgstr "ۭqϺФ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Enter Printer Name and Comments" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "" -"The following printers\n" -"\n" -"%s%s\n" -"are directly connected to your system" -msgstr "" -"\n" -"ثe@xLw˦bzWC" - -#: ../../network/modem.pm:1 -#, c-format -msgid "You don't have any winmodem" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "type: %s" -msgstr "榡G " - -#: ../../keyboard.pm:1 -#, c-format -msgid "Slovakian (QWERTY)" -msgstr "kJ (QWERTY)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"This should be a comma-separated list of local users or email addresses that " -"you want the backup results sent to. You will need a functioning mail " -"transfer agent setup on your system." -msgstr "" - -#: ../../standalone/draksound:1 -#, c-format -msgid "No Sound Card detected!" -msgstr "tΦĸ˸mI" - -#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 -#, c-format -msgid "Mouse Port" -msgstr "ƹs" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Check for unsecured accounts" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -"Need to restart the Display Manager for full changes to take effect. \n" -"(service dm restart - at the console)" -msgstr "" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Ftp Server" -msgstr "FTP A" - -#: ../../lang.pm:1 -#, c-format -msgid "Uganda" -msgstr "Uganda" - -#: ../../standalone/drakfont:1 -#, fuzzy, c-format -msgid "%s fonts conversion" -msgstr "pfm rഫ" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "the type of bus on which the mouse is connected" -msgstr "пzƹsǦCC" - -#: ../../help.pm:1 -#, c-format -msgid "" -"As a review, DrakX will present a summary of information it has about your\n" -"system. Depending on your installed hardware, you may have some or all of\n" -"the following entries. Each entry is made up of the configuration item to\n" -"be configured, followed by a quick summary of the current configuration.\n" -"Click on the corresponding \"%s\" button to change that.\n" -"\n" -" * \"%s\": check the current keyboard map configuration and change that if\n" -"necessary.\n" -"\n" -" * \"%s\": check the current country selection. If you are not in this\n" -"country, click on the \"%s\" button and choose another one. If your country\n" -"is not in the first list shown, click the \"%s\" button to get the complete\n" -"country list.\n" -"\n" -" * \"%s\": By default, DrakX deduces your time zone based on the country\n" -"you have chosen. You can click on the \"%s\" button here if this is not\n" -"correct.\n" -"\n" -" * \"%s\": check the current mouse configuration and click on the button to\n" -"change it if necessary.\n" -"\n" -" * \"%s\": clicking on the \"%s\" button will open the printer\n" -"configuration wizard. Consult the corresponding chapter of the ``Starter\n" -"Guide'' for more information on how to setup a new printer. The interface\n" -"presented there is similar to the one used during installation.\n" -"\n" -" * \"%s\": if a sound card is detected on your system, it is displayed\n" -"here. If you notice the sound card displayed is not the one that is\n" -"actually present on your system, you can click on the button and choose\n" -"another driver.\n" -"\n" -" * \"%s\": by default, DrakX configures your graphical interface in\n" -"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" -"\"%s\" to reconfigure your graphical interface.\n" -"\n" -" * \"%s\": if a TV card is detected on your system, it is displayed here.\n" -"If you have a TV card and it is not detected, click on \"%s\" to try to\n" -"configure it manually.\n" -"\n" -" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n" -"here. You can click on \"%s\" to change the parameters associated with the\n" -"card.\n" -"\n" -" * \"%s\": If you want to configure your Internet or local network access\n" -"now.\n" -"\n" -" * \"%s\": this entry allows you to redefine the security level as set in a\n" -"previous step ().\n" -"\n" -" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" -"idea to protect yourself from intrusions by setting up a firewall. Consult\n" -"the corresponding section of the ``Starter Guide'' for details about\n" -"firewall settings.\n" -"\n" -" * \"%s\": if you wish to change your bootloader configuration, click that\n" -"button. This should be reserved to advanced users.\n" -"\n" -" * \"%s\": here you'll be able to fine control which services will be run\n" -"on your machine. If you plan to use this machine as a server it's a good\n" -"idea to review this setup." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Comoros" -msgstr "Comoros" - -# calendar/gui/goto-dialog.glade.h:11 -#: ../../standalone/drakbackup:1 -#, c-format -msgid "May" -msgstr "5" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Yaboot mode" -msgstr "Yaboot Ҧ" - -#: ../../mouse.pm:1 -#, c-format -msgid "Generic 3 Button Mouse" -msgstr "@몺T䦡ƹ" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "USA (cable)" -msgstr " (cable)" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "" -"Can't relaunch LiLo!\n" -"Launch \"lilo\" as root in command line to complete LiLo theme installation." -msgstr "" -"Lk lilo!\n" -"Шϥ root bROܦr \"lilo\" {AHK lilo Gw" -"ˡC" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Select another media to restore from" -msgstr "пnΨӦ^sƪ˸mӷ" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Software Manager" -msgstr "Mz{" - -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "Re-submit" -msgstr "seX" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "CD in place - continue." -msgstr "CD N - ~C" - -#: ../../common.pm:1 -#, c-format -msgid "KB" -msgstr "KB" - -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "Network & Internet" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Lithuanian \"phonetic\" QWERTY" -msgstr "߳{ (phonetic, QWERTY )" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Net Boot Images" -msgstr "}M" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Sharing of local scanners" -msgstr "iΪL" - -#: ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Plug'n Play probing failed. Please select the correct monitor" -msgstr "Plug'n Play ѡAпܹwù" - -#: ../../services.pm:1 -#, c-format -msgid "Services and deamons" -msgstr "Aȵ{" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remote host name missing!" -msgstr "SwݥDW !" - -#: ../../fsedit.pm:1 -#, c-format -msgid "with /usr" -msgstr "" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Network" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Auto-detect printers connected to machines running Microsoft Windows" -msgstr "۰ʰ Microsoft Windows L" - -#: ../../any.pm:1 -#, c-format -msgid "This password is too simple" -msgstr "JKX²F" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Chkconfig obey msec rules" -msgstr "]wtΪA" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Slovakian (QWERTZ)" -msgstr "kJ (QWERTZ)" - -#: ../../share/advertising/06-development.pl:1 -#, c-format -msgid "" -"To modify and to create in different languages such as Perl, Python, C and C+" -"+ has never been so easy thanks to GNU gcc 3 and the best Open Source " -"development environments." -msgstr "" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "No devices found" -msgstr "䤣LI" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Truly minimal install (especially no urpmi)" -msgstr "ṳpw (L urpmi { )" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use daemon" -msgstr "ϥαƵ{{" - -#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1 -#: ../../standalone/drakauth:1 ../../standalone/drakconnect:1 -#: ../../standalone/logdrake:1 -#, c-format -msgid "Authentication" -msgstr "{Ҥ覡" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Add this printer to Star Office/OpenOffice.org/GIMP" -msgstr "sWoxL Star Office/OpenOffice.org/GIMP " - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Additional CUPS servers: " -msgstr " CUPS A \"%s\"" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Choose one of the auto-detected printers from the list or enter the hostname " -"or IP and the optional port number (default is 9100) in the input fields." -msgstr "" -"ХѲM椺ܱzwLءAåBJDW١B\n" -"IPTAnɽпJӳs (w]ϥ port 9100)C" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Where do you want to mount %s?" -msgstr "znoӸ˸m %s b ?" - -#: ../../lang.pm:1 -#, c-format -msgid "Algeria" -msgstr "Algeria" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore Via Network" -msgstr "ϥκ^sɮ" - -#: ../../any.pm:1 -#, c-format -msgid "Initrd-size" -msgstr "Initrd jp" - -#: ../../help.pm:1 -#, c-format -msgid "" -"In the case that different servers are available for your card, with or\n" -"without 3D acceleration, you are then asked to choose the server that best\n" -"suits your needs." -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\tBackups use tar and gzip\n" -msgstr "\tϥ tar P gzip iƥ\n" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Set as default" -msgstr "w]" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "2 MB" -msgstr "2 MB" - -#: ../../printer/main.pm:1 ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Configured on this machine" -msgstr "(oӾW)" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Both Control keys simultaneously" -msgstr "Pɨ Shift " - -#: ../../standalone/drakhelp:1 -#, c-format -msgid " --help - display this help \n" -msgstr "" - -#: ../../standalone.pm:1 -#, c-format -msgid "" -"[OPTION]...\n" -" --no-confirmation don't ask first confirmation question in " -"MandrakeUpdate mode\n" -" --no-verify-rpm don't verify packages signatures\n" -" --changelog-first display changelog before filelist in the " -"description window\n" -" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Setting Default Printer..." -msgstr "w]L" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Interface %s (using module %s)" -msgstr " %s (ϥ %s Ҳ)" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "Generating preview ..." -msgstr "ͱsϥܤ..." - -#: ../../network/network.pm:1 -#, c-format -msgid "" -"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " -"frequency), or add enough '0' (zeroes)." -msgstr "" - -#: ../../standalone/draksec:1 -#, fuzzy, c-format -msgid "ignore" -msgstr "s[Y" - -#: ../../security/help.pm:1 -#, c-format -msgid "" -"Allow/Forbid X connections:\n" -"\n" -"- ALL (all connections are allowed),\n" -"\n" -"- LOCAL (only connection from local machine),\n" -"\n" -"- NONE (no connection)." -msgstr "" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid ", multi-function device on parallel port #%s" -msgstr "AæCh\˸m \\/*%s" - -#: ../../mouse.pm:1 -#, c-format -msgid "serial" -msgstr "ǦC" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "DVD-ROM" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Georgian (\"Latin\" layout)" -msgstr "v (\"ԤB\" tm)" - -#: ../../share/advertising/09-mdksecure.pl:1 -#, c-format -msgid "Get the best items with Mandrake Linux Strategic partners" -msgstr "" - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "" -"You may now provide options to module %s.\n" -"Note that any address should be entered with the prefix 0x like '0x123'" -msgstr "" -"zݭnӼҲ %s wѼƿﶵCЪ`N@UA\n" -"JOmԭzAӨϥ 0x }YA蹳Ou0x123v" - -#: ../../lang.pm:1 -#, c-format -msgid "Kenya" -msgstr "֨" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Use ``Unmount'' first" -msgstr "n ``Unmount''" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Installing mtools packages..." -msgstr "bwˮM..." - -#: ../../any.pm:1 -#, c-format -msgid "You must specify a root partition" -msgstr "zݭnw@ root ΰ" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "first step creation" -msgstr "Ĥ@إ" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Both Shift keys simultaneously" -msgstr "Pɨ Shift " - -#: ../../standalone/drakhelp:1 -#, c-format -msgid "" -" --id <id_label> - load the html help page which refers to id_label\n" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Select a scanner model" -msgstr "zy" - -#: ../../security/help.pm:1 -#, c-format -msgid "Accept/Refuse bogus IPv4 error messages." -msgstr "" - -#: ../../printer/data.pm:1 -#, c-format -msgid "LPRng - LPR New Generation" -msgstr "LPRng - LPR New Generation" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Drakbackup Configuration" -msgstr "Drakbackup պA" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Save as.." -msgstr "tss..." - -#: ../../lang.pm:1 -#, c-format -msgid "Korea (North)" -msgstr "" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "" -"This interface has not been configured yet.\n" -"Launch the configuration wizard in the main window" -msgstr "|]wAа]wF" - -#: ../../install_gtk.pm:1 -#, c-format -msgid "System configuration" -msgstr "tξX" - -#: ../../any.pm:1 ../../security/l10n.pm:1 -#, c-format -msgid "Autologin" -msgstr "۰ʵnJ" - -#: ../../any.pm:1 -#, c-format -msgid "Domain Admin Password" -msgstr "zKX" - -#: ../../share/advertising/05-desktop.pl:1 -#, fuzzy, c-format -msgid "" -"Perfectly adapt your computer to your needs thanks to the 11 available " -"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME " -"2.2, Window Maker, ..." -msgstr "" -"Mandrake Linux 9.2 ѤF 11 خୱz{A]tG\n" -"KDE3BGnome2BWindowMakerBICEWMBBlackBox .." - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Configuring printer ..." -msgstr "b]wu%svL ..." - -#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"To ensure data integrity after resizing the partition(s), \n" -"filesystem checks will be run on your next boot into Windows(TM)" -msgstr "" - -#: ../../common.pm:1 -#, c-format -msgid "MB" -msgstr "MB" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, run some checks against the rpm database." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Virgin Islands (British)" -msgstr "Virgin Islands (British)" - -#: ../../lang.pm:1 -#, c-format -msgid "Bermuda" -msgstr "Bermuda" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "click here if you are sure." -msgstr "TwܽIo" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"No configuration file found \n" -"please click Wizard or Advanced." -msgstr "" -"|ͲպA]wɮסAI\n" -"FΪ̬OiҦإߤC" - -#: ../../help.pm:1 -#, c-format -msgid "" -"Listed here are the existing Linux partitions detected on your hard drive.\n" -"You can keep the choices made by the wizard, since they are good for most\n" -"common installations. If you make any changes, you must at least define a\n" -"root partition (\"/\"). Do not choose too small a partition or you will not\n" -"be able to install enough software. If you want to store your data on a\n" -"separate partition, you will also need to create a \"/home\" partition\n" -"(only possible if you have more than one Linux partition available).\n" -"\n" -"Each partition is listed as follows: \"Name\", \"Capacity\".\n" -"\n" -"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" -"\"partition number\" (for example, \"hda1\").\n" -"\n" -"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" -"\"sd\" if it is a SCSI hard drive.\n" -"\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" -"hard drives:\n" -"\n" -" * \"a\" means \"master hard drive on the primary IDE controller\";\n" -"\n" -" * \"b\" means \"slave hard drive on the primary IDE controller\";\n" -"\n" -" * \"c\" means \"master hard drive on the secondary IDE controller\";\n" -"\n" -" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" -"\n" -"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" -"\"second lowest SCSI ID\", etc." -msgstr "" -"ثeҦCXӪO{ثeΰϪAC\n" -"ΰϨӨϥΡAziH²ܺFҦw˵{z\n" -"۰ʨMwA@ӻo줣t覡C\n" -"pGzʳBzΰϹܡAOozܤ֭nwqX@@ /\n" -"ΰϨӨϥΡC\n" -"ثezwФWh Windows ΰϡAпܱzƱnYp Windows\n" -"ΰϡAHKŶXӦw Mandrake Linux @~tΡC\n" -"\n" -"UCCӤΰϳCXF: \"W\", \"eq\"C\n" -"\n" -"\"W\" OΤ@RW覡: \"w\"A\"wнs\"A\n" -"\"ΰϽs\" (A\"hda1\")C\n" -"\n" -"\"w\" AIDE wШϥ \"hd\"ASCSI hO \"sd\"C\n" -"\"wнs\" AHb \"hd\" Ϊ̬O \"sd\" ᭱A\n" -"\n" -" * \"a\" oO \"primary IDE controller WĤ@x (master) w\",\n" -"\n" -" * \"b\" oO \"primmary IDE controller WĤGx (slave) w\",\n" -"\n" -" * \"c\" oO \"secondary IDE controller WĤ@x (master) w\",\n" -"\n" -" * \"d\" oO \"secondary IDE controller WĤGx (slave) w\"C\n" -"\n" -"H SCSI wШӻA\"a\" NO \"SCSI IDE s̤p@x\", \"b\"\n" -"NO \"SCSI IDE sG@xw\"AM̦Uh....." - -#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 -#, fuzzy, c-format -msgid "Remove" -msgstr "M" - -#: ../../lang.pm:1 -#, c-format -msgid "Lesotho" -msgstr "" - -#: ../../ugtk2.pm:1 -#, c-format -msgid "utopia 25" -msgstr "" - -#: ../../printer/main.pm:1 -#, c-format -msgid "Pipe job into a command" -msgstr "ϥ Pipe u覡զCLu@" - -#: ../../lang.pm:1 -#, c-format -msgid "Cote d'Ivoire" -msgstr "Cote d'Ivoire" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "new dynamic device name generated by core kernel devfs" -msgstr "Ѧs devfs ѲͪʺAs˸mW" - -#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 -#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1 -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Yes" -msgstr "O" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "Which protocol do you want to use?" -msgstr "znϥΨӳqTw ?" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore Progress" -msgstr "^si" - -#: ../../lang.pm:1 -#, c-format -msgid "Estonia" -msgstr "Estonia" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Choose the host on which the local scanners should be made available:" -msgstr "" - -#: ../../partition_table.pm:1 -#, c-format -msgid "" -"You have a hole in your partition table but I can't use it.\n" -"The only solution is to move your primary partitions to have the hole next " -"to the extended partitions." -msgstr "" -"zwФΪ{LkϥΪťպϰϡAߤ@ѨMkO\n" -"NDΰϪmhAoǪťպϰϻPΰϬ۾FC" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Channel" -msgstr "" - -#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 -#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 -#, c-format -msgid "Add" -msgstr "sW" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "No Internet Connection Sharing has ever been configured." -msgstr "Internet suɩ|]wC" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid " Error while sending mail. \n" -msgstr "loeɵoͿ~C\n" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#: ../../standalone/keyboarddrake:1 -#, c-format -msgid "Keyboard" -msgstr "L" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Insert the CD with volume label %s\n" -" in the CD drive under mount point /mnt/cdrom" -msgstr "" -"иmJҦW٬ %s CD о\n" -"(I /mnt/cdrom)" - -#: ../../network/network.pm:1 -#, c-format -msgid "" -"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " -"enough '0' (zeroes)." -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Choose the connection you want to configure" -msgstr "ܱzn]wsu" - -#: ../../standalone/draksec:1 -#, c-format -msgid "Please wait, setting security level..." -msgstr "еyA]wwŤ..." - -#: ../../network/network.pm:1 -#, c-format -msgid "Configuring network device %s" -msgstr "b]w˸m %s" - -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "activated" -msgstr "ߧYҰ" - -#: ../../standalone/drakpxe:1 -#, fuzzy, c-format -msgid "Please choose which network interface will be used for the dhcp server." -msgstr "пܱznΨӳsW Internet d" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Finding packages to upgrade..." -msgstr "bjMݭnɯŪM" - -#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Mount point: " -msgstr "IG " - -#: ../../standalone/drakfont:1 -#, c-format -msgid "parse all fonts" -msgstr "ѪRҦr" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "Allow/Forbid direct root login." -msgstr "(oӾW)" - -#: ../../security/help.pm:1 -#, c-format -msgid " Accept/Refuse broadcasted icmp echo." -msgstr "" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "With X" -msgstr "]t X " - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Multi-head configuration" -msgstr "hܥd]w" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "No browser available! Please install one" -msgstr "䤣iΪs{AХwˤWiΪs" - -#: ../../Xconfig/main.pm:1 -#, c-format -msgid "" -"Keep the changes?\n" -"The current configuration is:\n" -"\n" -"%s" -msgstr "" -"xsثeܧH\n" -"ثeպAOG\n" -"\n" -"%s" - -#: ../../fsedit.pm:1 -#, c-format -msgid "You can't use ReiserFS for partitions smaller than 32MB" -msgstr "p 32MB ΰϤ] ReiserFS 榡" - -#: ../../services.pm:1 -#, c-format -msgid "" -"The rwho protocol lets remote users get a list of all of the users\n" -"logged into a machine running the rwho daemon (similiar to finger)." -msgstr "" -"rwho qTwAݪϥΪoӾWҦnJbDW\n" -"ϥΧ ( finger)C" - -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Domain name" -msgstr "W" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Sharing of local printers" -msgstr "iΪL" - -#: ../../security/help.pm:1 -#, c-format -msgid "Enable/Disable libsafe if libsafe is found on the system." -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Available printers" -msgstr "iΪL" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "NO" -msgstr "T" - -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Empty" -msgstr "Empty" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "text width" -msgstr "re " - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Where do you want to mount device %s?" -msgstr "znoӸ˸m %s b ?" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "The default lease (in seconds)" -msgstr "w]ɶ ()" - -#: ../../network/netconnect.pm:1 -#, fuzzy, c-format -msgid "" -"We are now going to configure the %s connection.\n" -"\n" -"\n" -"Press \"%s\" to continue." -msgstr "" -"\n" -"\n" -"dzƳ]w %s suC\n" -"\n" -"\n" -"Tw~C" - -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Interface \"%s\"" -msgstr " %s" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "With basic documentation (recommended!)" -msgstr "]t (ij)" - -#: ../../mouse.pm:1 -#, c-format -msgid "1 button" -msgstr "@ӫ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"There are %d unknown printers directly connected to your system" -msgstr "" -"\n" -"ثe %d xLw˦bzWC" - -#: ../../Xconfig/main.pm:1 -#, c-format -msgid "Test" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Korea" -msgstr "" - -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "Your choice? (default `%s'%s) " -msgstr "z? (w] `%s'%s) " - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Raw printer" -msgstr "Raw L" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "official vendor name of the cpu" -msgstr "˸mtӦW" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Useless without Terminal Server" -msgstr "" - -#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1 -#, c-format -msgid "Vendor" -msgstr "t" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Interface %s" -msgstr " %s" - -#: ../../steps.pm:1 -#, c-format -msgid "Configure mouse" -msgstr "]wƹ" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Choose the mount points" -msgstr "I" - -#: ../../help.pm:1 ../../standalone/drakTermServ:1 ../../standalone/drakfont:1 -#, c-format -msgid "OK" -msgstr "Tw" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Yugoslavian (latin)" -msgstr "nԤ (ԤBtm)" - -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Installing" -msgstr "bw" - -#: ../../mouse.pm:1 -#, fuzzy, c-format -msgid "Logitech MouseMan with Wheel emulation" -msgstr "Logitech Bus Mouse" - -#: ../../any.pm:1 -#, c-format -msgid "Launch userdrake" -msgstr "Ұ userdrake" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Is this an install or an upgrade?" -msgstr "oOw˩άOɯ?" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "ISDN card" -msgstr " ISDN d" - -#: ../../share/advertising/02-community.pl:1 -#, c-format -msgid "" -"To share your own knowledge and help build Linux software, join our " -"discussion forums on our \"Community\" webpages." -msgstr "" -"noi@B}XsTP|覡A]tDzߡB\n" -"оǡBDUPѻPQסAаѦҧڭ̭W \"Community\" " - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\t-Hard drive.\n" -msgstr "\t-w\n" - -#: ../../help.pm:1 -#, c-format -msgid "" -"This step is activated only if an old GNU/Linux partition has been found on\n" -"your machine.\n" -"\n" -"DrakX now needs to know if you want to perform a new install or an upgrade\n" -"of an existing Mandrake Linux system:\n" -"\n" -" * \"%s\": For the most part, this completely wipes out the old system. If\n" -"you wish to change how your hard drives are partitioned, or change the file\n" -"system, you should use this option. However, depending on your partitioning\n" -"scheme, you can prevent some of your existing data from being over-written.\n" -"\n" -" * \"%s\": this installation class allows you to update the packages\n" -"currently installed on your Mandrake Linux system. Your current\n" -"partitioning scheme and user data is not altered. Most of other\n" -"configuration steps remain available, similar to a standard installation.\n" -"\n" -"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n" -"running version \"8.1\" or later. Performing an Upgrade on versions prior\n" -"to Mandrake Linux version \"8.1\" is not recommended." -msgstr "" - -#: ../../printer/main.pm:1 -#, c-format -msgid "Printer on remote CUPS server" -msgstr "ݪ CUPS AL" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." -msgstr "Lkb Star Office/OpenOffice.org/GIMP L \"%s\"C" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "here if no." -msgstr "TwIo" - -#: ../../network/network.pm:1 -#, fuzzy, c-format -msgid "DHCP host name" -msgstr "DW" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "The maximum lease (in seconds)" -msgstr "̤jɶ ()" - -#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 -#, c-format -msgid "Please choose which serial port your mouse is connected to." -msgstr "пzƹsǦCC" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Did it work properly?" -msgstr "CL`ܡH" - -#: ../../fs.pm:1 -#, c-format -msgid "Mount the file system read-only." -msgstr "" - -#: ../../security/level.pm:1 -#, c-format -msgid "Poor" -msgstr "t" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Report check result by mail" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Grenada" -msgstr "Grenada" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "The DHCP start range" -msgstr "DHCP _ld" - -#: ../../any.pm:1 -#, c-format -msgid "Unsafe" -msgstr "ѰϺˬd" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid ", %s sectors" -msgstr "A %s ϰ" - -#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 -#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 -#: ../../standalone/harddrake2:1 -#, c-format -msgid "No" -msgstr "_" - -#: ../../lang.pm:1 -#, c-format -msgid "Guadeloupe" -msgstr "Guadeloupe" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Kannada" -msgstr "Canada" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "could not find any font.\n" -msgstr "䤣rC\n" - -#: ../../standalone/keyboarddrake:1 -#, c-format -msgid "Do you want the BackSpace to return Delete in console?" -msgstr "zƱ BackSpace hb console U^ Delete 䪺\ܡH" - -#: ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Vertical refresh rate" -msgstr "sWv" - -#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1 -#, c-format -msgid "Entering step `%s'\n" -msgstr "iJBJ `%s'\n" - -#: ../../lang.pm:1 -#, c-format -msgid "Niger" -msgstr "Niger" - -#: ../../mouse.pm:1 -#, c-format -msgid "Logitech MouseMan" -msgstr "Logitech Bus Mouse" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Removing %s ..." -msgstr "b %s" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "No printer" -msgstr "LL" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "alert configuration" -msgstr "ĵܳ]w" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "NetWare Printer Options" -msgstr "NetWare Lﶵ" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "%s BootSplash (%s) preview" -msgstr "%s }ie (%s) s" - -# calendar/gui/goto-dialog.glade.h:4 -#: ../../standalone/drakbackup:1 -#, c-format -msgid "February" -msgstr "2" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "General" -msgstr "@" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "/etc/issue* exist" -msgstr "" - -#: ../../steps.pm:1 -#, c-format -msgid "Add a user" -msgstr "sWϥΪ" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Network configuration (%d adapters)" -msgstr "պA (%d d)" - -# calendar/gui/goto-dialog.glade.h:1 -#: ../../standalone/drakbackup:1 -#, c-format -msgid "April" -msgstr "4" - -#: ../../standalone/drakconnect:1 -#, fuzzy, c-format -msgid "Deactivate now" -msgstr "ߧY" - -#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 -#, c-format -msgid "Mandatory package %s is missing" -msgstr "~! %s Mw˩Ϊ̬O" - -#: ../../lang.pm:1 -#, c-format -msgid "Philippines" -msgstr "Philippines" - -#: ../../interactive.pm:1 ../../ugtk2.pm:1 -#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/gtk.pm:1 -#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 -#: ../../interactive/stdio.pm:1 ../../standalone/drakbackup:1 -#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 -#: ../../standalone/drakfloppy:1 ../../standalone/drakperm:1 -#: ../../standalone/draksec:1 ../../standalone/mousedrake:1 -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Ok" -msgstr "Tw" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "drakTermServ Overview" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Print Queue Name" -msgstr "CLCW" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Do you want to use aboot?" -msgstr "znϥ aboot ?" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Belarusian" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"PDQ only supports local printers, remote LPD printers, and Socket/TCP " -"printers.\n" -msgstr "" -"PDQ Ȥ䴩aݦLAΪ̬O LPD LAH\n" -"TCP/Socket LC\n" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Move files to the new partition" -msgstr "Nɮhsΰ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Add here the CUPS servers whose printers you want to use. You only need to " -"do this if the servers do not broadcast their printer information into the " -"local network." -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"Welcome to the Printer Setup Wizard\n" -"\n" -"This wizard will help you to install your printer(s) connected to this " -"computer.\n" -"\n" -"Please plug in and turn on all printers connected to this machine so that it/" -"they can be auto-detected.\n" -"\n" -" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " -"to set up your printer(s) now." -msgstr "" -"\n" -"wӨL]wF\n" -"\n" -"Uӳ]wFN|ɱzL]wA]tLC\n" -"YOzn]wLOw˦bAWAХT{AuwTAq" -"åBwg}ҡAHK۰ʰALC\n" -"\n" -"AT{SDɡAIuU@BvAΪ̬OIuv]wC" - -#: ../../lang.pm:1 -#, c-format -msgid "Pitcairn" -msgstr "Pitcairn" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore From Catalog" -msgstr "ϥΫ^s" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "IDE" -msgstr "IDE" - -#: ../../fs.pm:1 -#, c-format -msgid "mounting partition %s in directory %s failed" -msgstr "N %s ΰϱ %s ؿɵoͿ~" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Lilo screen" -msgstr "Lilo ù" - -#: ../../bootloader.pm:1 ../../help.pm:1 -#, c-format -msgid "LILO with graphical menu" -msgstr "ϧΤ LILO {" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Estimating" -msgstr "bp" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "You can't unselect this package. It is already installed" -msgstr "oӮMwgw˦btΤWFAziHoӮM" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid ", printer \"%s\" on SMB/Windows server \"%s\"" -msgstr "AL \"%s\"A SMB/Windows A \"%s\"" - -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Go on anyway?" -msgstr "Lצpn~ ?" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Looking for available packages and rebuilding rpm database..." -msgstr "bjMiHw˪MåBإ rpm Ʈw..." - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "" -"\n" -" DrakBackup Report \n" -msgstr "" -"\n" -" DrakBackup M \n" -"\n" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Does not appear to be recordable media!" -msgstr "GOiNC˸mI" - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "Specify options" -msgstr "wѼ" - -#: ../../lang.pm:1 -#, c-format -msgid "Vanuatu" -msgstr "Vanuatu" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "New user list:\n" -msgstr "" -"\n" -"- ϥΪɮ:\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Either the server name or the server's IP must be given!" -msgstr "ADW٩Ϊ̬O IP w" - -#: ../../any.pm:1 -#, c-format -msgid "" -"A custom bootdisk provides a way of booting into your Linux system without\n" -"depending on the normal bootloader. This is useful if you don't want to " -"install\n" -"SILO on your system, or another operating system removes SILO, or SILO " -"doesn't\n" -"work with your hardware configuration. A custom bootdisk can also be used " -"with\n" -"the Mandrake rescue image, making it much easier to recover from severe " -"system\n" -"failures.\n" -"\n" -"If you want to create a bootdisk for your system, insert a floppy in the " -"first\n" -"drive and press \"Ok\"." -msgstr "" -"s@@}iHz̾awФW}\n" -"{NiH}iJz Linux tΡAz\n" -"btΤWw SILO ɭԷ|ܦΡA\n" -"Ϊ̷L@~tλ\ SILOB SILO bzw\n" -"WLk`B@ɭԡA@}N|z\n" -"٨Ƥ֡A~Ao}٥iH Mandrake \n" -"ѪϴϤ (rescue disk) @_ϥΡAzbt\n" -"oͰDɥiH}ihi״_u@C\n" -"YzƱw˵{zs@@i}ϤܡAЦb\n" -"nо̭J@ϤÿyTwzC" - -#: ../../fsedit.pm:1 -#, c-format -msgid "You can't use an encrypted file system for mount point %s" -msgstr "zϥνsKLɮרtΨӳ̬ %s I" - -#: ../../security/help.pm:1 -#, c-format -msgid "Set the password history length to prevent password reuse." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Norfolk Island" -msgstr "Norfolk Island" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Theme installation failed!" -msgstr "Gw˥" - -#: ../../fsedit.pm:1 -#, c-format -msgid "Nothing to do" -msgstr "Sʧ@" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Use for loopback" -msgstr "@ loopback" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Mandrake Bug Report Tool" -msgstr "Mandrake γiu" - -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Apply filter" -msgstr "" - -#: ../../network/adsl.pm:1 -#, c-format -msgid "use pppoe" -msgstr "ϥ pppoe" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Moving files to the new partition" -msgstr "bNɮhsΰ" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" -msgstr "XFree %s ftʽ 3D w[t" - -#: ../../help.pm:1 ../../interactive.pm:1 -#, c-format -msgid "Advanced" -msgstr "i" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Transfer" -msgstr "ǰe" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Dvorak (Swedish)" -msgstr "Dvorak (Swedish)" - -#: ../../lang.pm:1 -#, c-format -msgid "Afghanistan" -msgstr "Afghanistan" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "More Options" -msgstr "hﶵ" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Delete Hard Drive tar files after backup to other media." -msgstr "ƥ\RwФW tar ɮ" - -#: ../../lang.pm:1 -#, c-format -msgid "Burundi" -msgstr "Burundi" - -#: ../../services.pm:1 -#, c-format -msgid "" -"cron is a standard UNIX program that runs user-specified programs\n" -"at periodic scheduled times. vixie cron adds a number of features to the " -"basic\n" -"UNIX cron, including better security and more powerful configuration options." -msgstr "" -"cron OӼз unix tε{AѨϥΪ̩wSw{C\n" -"vixie cron W[F\h\A\n" -"bwʻP]w譱uʦnΡC" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Add Client -->" -msgstr "sWΤ -->" - -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Read carefully!" -msgstr "иԲӾ\Ū!" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "RW" -msgstr "" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "" -"Please,\n" -"type in your tv norm and country" -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 -#, c-format -msgid "Port" -msgstr "s" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "No (experts only)" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "No kernel selected!" -msgstr "֤!" - -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm:1 -#, c-format -msgid "Press enter to boot the selected OS, 'e' to edit the" -msgstr "Press enter to boot the selected OS, 'e' to edit the" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Set-GID" -msgstr "Set-GID" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "The encryption keys do not match" -msgstr "J[K_ŦX" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"For a multisession CD, only the first session will erase the cdrw. Otherwise " -"the cdrw is erased before each backup." -msgstr "" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "USB printer" -msgstr "AUSB L" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Right \"Windows\" key" -msgstr "k \"Windows\" " - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, check empty password in /etc/shadow." -msgstr "" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Before continuing, you should carefully read the terms of the license. It\n" -"covers the entire Mandrake Linux distribution. If you do agree with all the\n" -"terms in it, check the \"%s\" box. If not, simply turn off your computer." -msgstr "" -"biUʧ@eAzwgJӪ\ŪUvڡC\n" -"o]tӡuMandrake-Linux-DistriubtionvveAӭYOzPNҴΪ" -"vګŧiAziHIyڵzsAw˵{N|ߧYCYOz" -"ܡAiHIyzsHK~iUwˡC " - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Here is a list of the available printing options for the current printer:\n" -"\n" -msgstr "" -"U]tFثeL䴩ﶵM:\n" -"\n" - -#: ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "Resolutions" -msgstr "ѪR" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "" -"drakfirewall configurator\n" -"\n" -"This configures a personal firewall for this Mandrake Linux machine.\n" -"For a powerful and dedicated firewall solution, please look to the\n" -"specialized MandrakeSecurity Firewall distribution." -msgstr "" -"wӨ컴q]w{\n" -"\n" -"oOΨӳ]wMandrake-LinuxWӤH𪺲պAA\n" -"Uz²]wC\n" -"\n" -"YOzݭnܧƱjjѨMסAziHѾ\\n" -"yMandrakeSecurity Firewall distributionz~TC" - -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "" -"Please enter your username, password and domain name to access this host." -msgstr "пJAϥΪ̦W١BKXHκW١AHKsusC" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Remove selected host" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Network configuration" -msgstr "]w" - -#: ../../any.pm:1 -#, c-format -msgid "No sharing" -msgstr "" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Move selected rule down one level" -msgstr "" - -#: ../../common.pm:1 -#, c-format -msgid "TB" -msgstr "TB" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "FATAL" -msgstr "~" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Refresh the list" -msgstr "ϥΪ̦C" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Per client %s:\n" -" \tThrough clusternfs, each diskless client can have its own unique " -"configuration files\n" -" \ton the root filesystem of the server. By allowing local client " -"hardware configuration, \n" -" \tdrakTermServ will help create these files." -msgstr "" - -#: ../../standalone/drakpxe:1 -#, c-format -msgid "" -"The DHCP server will allow other computer to boot using PXE in the given " -"range of address.\n" -"\n" -"The network address is %s using a netmask of %s.\n" -"\n" -msgstr "" - -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 -#: ../../standalone/drakperm:1 ../../standalone/printerdrake:1 -#, c-format -msgid "Delete" -msgstr "R" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "" -"I can setup your computer to automatically start the graphical interface " -"(XFree) upon booting.\n" -"Would you like XFree to start when you reboot?" -msgstr "" -"{iHz]wb}ɦ۰ʶiJ X ҡA\n" -"zƱbs}HN۰ʶiJ X Ҷ ?" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Build the disk" -msgstr "إ߶}Ϥ" - -#: ../../standalone/net_monitor:1 -#, fuzzy, c-format -msgid "Disconnect %s" -msgstr "_su" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Status:" -msgstr "AG" - -#: ../../network/network.pm:1 -#, c-format -msgid "HTTP proxy" -msgstr "HTTP NzA" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "SSH Server" -msgstr "NIS AD" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\t-Network by rsync.\n" -msgstr "\t- (zL rsync)\n" - -#: ../../network/isdn.pm:1 -#, fuzzy, c-format -msgid "European protocol" -msgstr "Europe qTw" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid ", printer \"%s\" on server \"%s\"" -msgstr "AL \"%s\"AD \"%s\"" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Note that currently all 'net' media also use the hard drive." -msgstr "" -"нTwztΦw˨åBҥ cron Ƶ{Aȵ{C\n" -"\n" -"Ъ`NثeҦ '' C|ϥεwСC" - -#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1 -#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1 -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 -#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 -#: ../../standalone/drakboot:1 ../../standalone/drakbug:1 -#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 -#: ../../standalone/draksplash:1 -#, c-format -msgid "Error" -msgstr "~" - -#: ../../any.pm:1 -#, c-format -msgid "allow \"su\"" -msgstr "\usuv" - -#: ../../lang.pm:1 ../../standalone/drakxtv:1 -#, c-format -msgid "Australia" -msgstr "DjQ" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "please wait during ttmkfdir..." -msgstr "еyA ttmkfdir {..." - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Configure only card \"%s\"%s" -msgstr "ȳ]woi \"%s\"%s d" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "Level" -msgstr "h" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Change the printing system" -msgstr "ܧCLt" - -#: ../../Xconfig/card.pm:1 -#, fuzzy, c-format -msgid "" -"Your system supports multiple head configuration.\n" -"What do you want to do?" -msgstr "" -"ztΤ䴩hܥdҡC\n" -"zOH" - -#: ../../steps.pm:1 -#, c-format -msgid "Configure services" -msgstr "]wtΪA" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Broadcast Address:" -msgstr "" - -#: ../../partition_table.pm:1 -#, c-format -msgid "mount failed: " -msgstr "ѡG" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "" -"the GNU/Linux kernel needs to run a calculation loop at boot time to " -"initialize a timer counter. Its result is stored as bogomips as a way to " -"\"benchmark\" the cpu." -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Image" -msgstr "֤" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." -msgstr "LksWL \"%s\" Star Office/OpenOffice.org/GIMP C" - -#: ../../services.pm:1 -#, c-format -msgid "Remote Administration" -msgstr "ݺz" - -#: ../../modules.pm:1 -#, c-format -msgid "" -"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." -msgstr "o䪺 PCMCIA A䴩 kernel 2.2 AijШϥ kernel 2.4C" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Selected All" -msgstr "Ҧ" - -#: ../../printer/data.pm:1 -#, c-format -msgid "CUPS - Common Unix Printing System" -msgstr "CUPS - Common Unix Printing System" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Webmin Service" -msgstr "Webmin A" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "device" -msgstr "˸m]" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Enter the directory to save to:" -msgstr "пJznxsؿW١G" - -#: ../../crypto.pm:1 ../../lang.pm:1 -#, c-format -msgid "Greece" -msgstr "þ" - -#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1 -#, c-format -msgid "All" -msgstr "Ҧ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Which printing system (spooler) do you want to use?" -msgstr "zΨ@MCLtΡH" - -# calendar/gui/goto-dialog.glade.h:8 -#: ../../standalone/drakbackup:1 -#, c-format -msgid "July" -msgstr "7" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "Prints into %s" -msgstr "ACL %s" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "An error occurred" -msgstr "oͤ@ӿ~" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "" -"This package must be upgraded.\n" -"Are you sure you want to deselect it?" -msgstr "" -"oӮM@wns~A\n" -"zTwzn復?" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Tamil (Typewriter-layout)" -msgstr "Ȭ (typewriter)" - -#: ../../security/help.pm:1 -#, c-format -msgid "Use password to authenticate users." -msgstr "" - -#: ../../security/help.pm:1 -#, c-format -msgid "" -"Allow/Forbid the list of users on the system on display managers (kdm and " -"gdm)." -msgstr "" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "manual" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Filename text to search for:" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer manufacturer, model, driver" -msgstr "Lt,,Xʵ{" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "" -"There is no medium or it is write-protected for device %s.\n" -"Please insert one." -msgstr "" -"b˸m %s 䤣ϺФAΪ̬OϤgC\n" -"ЩJ@iϺФC" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"Directory %s already contains data\n" -"(%s)" -msgstr "" -"%s ؿwg]tFƤF\n" -"(%s)" - -#: ../../printer/main.pm:1 -#, c-format -msgid "Printer on NetWare server" -msgstr "Netware AL" - -#: ../../any.pm:1 -#, c-format -msgid "Give the ram size in MB" -msgstr "JOjp (H MB )" - -# calendar/gui/dialogs/cal-prefs-dialog.glade.h:23 -# calendar/gui/event-editor.c:479 -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Friday" -msgstr "P" - -#: ../../standalone/net_monitor:1 -#, fuzzy, c-format -msgid "Disconnection from Internet complete." -msgstr "su Internet" - -#: ../../any.pm:1 -#, c-format -msgid "Real name" -msgstr "ϥΪ̦W" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "done" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Please uncheck or remove it on next time." -msgstr "U@ШΪ̬OӶءC" - -#: ../../security/level.pm:1 -#, c-format -msgid "Higher" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Choose the partitions you want to format" -msgstr "ܭn榡ƪΰ" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "" -"No TV Card has been detected on your machine. Please verify that a Linux-" -"supported Video/TV Card is correctly plugged in.\n" -"\n" -"\n" -"You can visit our hardware database at:\n" -"\n" -"\n" -"http://www.linux-mandrake.com/en/hardware.php3" -msgstr "" -"ثeztΰqdAнT{zqdwTC\n" -"\n" -"\n" -"t~гsWڭ̪xdݸƮwA˵zqdO_wg䴩G\n" -"\n" -"\n" -"http://www.linux-mandrake.com/en/hardware.php3" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Can't find %s on %s" -msgstr "Lk %s ( %s)" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Japanese 106 keys" -msgstr "饻 106 " - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Could not install the packages needed to share your scanner(s)." -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "This will take a few minutes." -msgstr "oӹL{N|ݭnO@ǮɶC" - -#: ../../lang.pm:1 -#, c-format -msgid "Burkina Faso" -msgstr "Burkina Faso" - -# calendar/gui/goto-dialog.glade.h:9 -#: ../../standalone/drakbackup:1 -#, c-format -msgid "June" -msgstr "6" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Use scanners on remote computers" -msgstr "" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Delete selected rule" -msgstr "RҿWh" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Accessing printers on remote CUPS servers" -msgstr "ݪ CUPS AL" - -#: ../../any.pm:1 -#, c-format -msgid "Insert a floppy in %s" -msgstr "Цb %s JϺФ" - -#: ../../lang.pm:1 -#, c-format -msgid "Maldives" -msgstr "Maldives" - -#: ../../any.pm:1 -#, c-format -msgid "compact" -msgstr "KҦ" - -#: ../../common.pm:1 -#, c-format -msgid "1 minute" -msgstr "1 " - -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "type: fat" -msgstr "榡G " - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "on channel %d id %d\n" -msgstr "bqD %d id %d\n" - -#: ../../printer/main.pm:1 -#, c-format -msgid ", multi-function device" -msgstr "Ah\˸m" - -# mail/message-list.c:685 -#: ../../lang.pm:1 -#, c-format -msgid "Laos" -msgstr "d" - -#: ../../share/advertising/04-configuration.pl:1 -#, c-format -msgid "" -"Mandrake Linux 9.2 provides you with the Mandrake Control Center, a powerful " -"tool to fully adapt your computer to the use you make of it. Configure and " -"customize elements such as the security level, the peripherals (screen, " -"mouse, keyboard...), the Internet connection and much more!" -msgstr "" - -#: ../../security/help.pm:1 -#, c-format -msgid "Activate/Disable ethernet cards promiscuity check." -msgstr "" - -#: ../../install_interactive.pm:1 -#, fuzzy, c-format -msgid "There is no FAT partition to resize (or not enough space left)" -msgstr "SiΪ FAT ΰϯվjpAΪ̬OӤΰϨSŶ" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Up" -msgstr "VW" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Firewall" -msgstr "" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Area:" -msgstr "ϰG" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "(E)IDE/ATA controllers" -msgstr "" - -#: ../../fs.pm:1 -#, c-format -msgid "All I/O to the file system should be done synchronously." -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer Server" -msgstr "CLAW" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Custom configuration" -msgstr "ĵܳ]w" - -#: ../../standalone/drakpxe:1 -#, c-format -msgid "" -"Please indicate where the installation image will be available.\n" -"\n" -"If you do not have an existing directory, please copy the CD or DVD " -"contents.\n" -"\n" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Saint Pierre and Miquelon" -msgstr "Saint Pierre and Miquelon" - -# calendar/gui/goto-dialog.glade.h:14 -#: ../../standalone/drakbackup:1 -#, c-format -msgid "September" -msgstr "9" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "saving Bootsplash theme..." -msgstr "xs}JϤG..." - -#: ../../lang.pm:1 -#, c-format -msgid "Portugal" -msgstr "Portugal" - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "Do you have another one?" -msgstr "z٦L?" - -#: ../../printer/main.pm:1 -#, c-format -msgid ", printing to %s" -msgstr "ACL %s" - -#: ../../network/network.pm:1 -#, fuzzy, c-format -msgid "Assign host name from DHCP address" -msgstr "пJDW٩άO IP" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Toggle to normal mode" -msgstr "@Ҧ" - -#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Generic" -msgstr "@" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Cylinder %d to %d\n" -msgstr " %d ϬW %d ϬW\n" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "YOUR TEXT HERE" -msgstr "" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "New profile..." -msgstr "s]w ..." - -#: ../../modules/interactive.pm:1 ../../standalone/draksec:1 -#, c-format -msgid "NONE" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Which disk do you want to move it to?" -msgstr "znʨ쨺ӺϺо ?" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "Display logo on Console" -msgstr "b Console logo" - -#: ../../any.pm:1 -#, c-format -msgid "Windows Domain" -msgstr "Windows " - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Saami (norwegian)" -msgstr "Dvorak (Norwegian)" - -#: ../../standalone/drakpxe:1 -#, fuzzy, c-format -msgid "Interface %s (on network %s)" -msgstr " %s (ϥ %s Ҳ)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "INFO" -msgstr "T" - -#: ../../lang.pm:1 -#, fuzzy, c-format -msgid "Wallis and Futuna" -msgstr "Wallis and Futuna Islands" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Need to create /etc/dhcpd.conf first!" -msgstr "ݭnإ /etc/dhcpd.conf ɮסI" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Is FPU present" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "There are no scanners found which are available on your system.\n" -msgstr "ztΰ즳Lw" - -#: ../../services.pm:1 -#, c-format -msgid "" -"No additional information\n" -"about this service, sorry." -msgstr "" -"p ! oӪAȶبèS\n" -"B~TC" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Build Single NIC -->" -msgstr "إ߳@d -->" - -#: ../../lang.pm:1 -#, c-format -msgid "Marshall Islands" -msgstr "Marshall Islands" - -#: ../../ugtk2.pm:1 -#, c-format -msgid "Is this correct?" -msgstr "oˤlTܡH" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Windows (FAT32)" -msgstr "Windows (FAT32)" - -#: ../../steps.pm:1 -#, c-format -msgid "Root password" -msgstr "Root KX" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Build All Kernels -->" -msgstr "إߩҦ֤ -->" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "DVDRAM device" -msgstr "˸m]" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, report unowned files." -msgstr "" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "" -"This is HardDrake, a Mandrake hardware configuration tool.\n" -"<span foreground=\"royalblue3\">Version:</span> %s\n" -"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud <tvignaud" -"\\@mandrakesoft.com>\n" -"\n" -msgstr "" -"oO HardDrake {AMandrake ҵoiw˵]wuC\n" -"G" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "" -"You don't have a swap partition.\n" -"\n" -"Continue anyway?" -msgstr "" -"zS]wmΰϡA\n" -"\n" -"ަpn~ ?" - -#: ../../install_steps_gtk.pm:1 -#, fuzzy, c-format -msgid "Version: " -msgstr "sG %s\n" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Server IP missing!" -msgstr "NCP AW٨Sw!" - -#: ../../lang.pm:1 -#, c-format -msgid "Suriname" -msgstr "Suriname" - -#: ../../network/adsl.pm:1 -#, fuzzy, c-format -msgid "Use a floppy" -msgstr "xs]wϤ" - -#: ../../any.pm:1 -#, c-format -msgid "Enable ACPI" -msgstr "ҥ ACPI" - -#: ../../fs.pm:1 -#, c-format -msgid "Give write access to ordinary users" -msgstr "" - -#: ../../help.pm:1 -#, c-format -msgid "Graphical Environment" -msgstr "ϧΤ" - -#: ../../lang.pm:1 -#, c-format -msgid "Gibraltar" -msgstr "Gibraltar" - -#: ../../network/modem.pm:1 -#, fuzzy, c-format -msgid "Do nothing" -msgstr "O۰t" - -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "Delete Client" -msgstr "<-- RΤ" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Filesystem type: " -msgstr "ɮרtή榡G " - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Starting network..." -msgstr "Ұʺ ..." - -#: ../../lang.pm:1 -#, fuzzy, c-format -msgid "Vietnam" -msgstr "Viet Nam" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "/_Fields description" -msgstr "yz" - -#: ../../share/advertising/10-security.pl:1 -#, c-format -msgid "Optimize your security by using Mandrake Linux" -msgstr "ztΧ[w" - -#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 -#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1 -#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1 -#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 -#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1 -#: ../../standalone/drakperm:1 ../../standalone/draksec:1 -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Help" -msgstr "DU" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Check if the network devices are in promiscuous mode" -msgstr "" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Your personal phone number" -msgstr "zӤHqܸX" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Which size do you want to keep for Windows on" -msgstr "znOdh֪Ŷ windows ϥ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Test page(s) have been sent to the printer.\n" -"It may take some time before the printer starts.\n" -msgstr "" -"խwgQeCLA{FAۥiݭn\n" -"@IɶAL~|GLXӡC\n" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Username required" -msgstr "ݭnJbW" - -#: ../../standalone/drakfloppy:1 -#, fuzzy, c-format -msgid "Device" -msgstr "˸mG " - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Depending on the default language you chose in Section , DrakX will\n" -"automatically select a particular type of keyboard configuration. However,\n" -"you may not have a keyboard that corresponds exactly to your language: for\n" -"example, if you are an English speaking Swiss person, you may have a Swiss\n" -"keyboard. Or if you speak English but are located in Quebec, you may find\n" -"yourself in the same situation where your native language and keyboard do\n" -"not match. In either case, this installation step will allow you to select\n" -"an appropriate keyboard from a list.\n" -"\n" -"Click on the \"%s\" button to be presented with the complete list of\n" -"supported keyboards.\n" -"\n" -"If you choose a keyboard layout based on a non-Latin alphabet, the next\n" -"dialog will allow you to choose the key binding that will switch the\n" -"keyboard between the Latin and non-Latin layouts." -msgstr "" -"`pӻAuDrakXvT̷ӱzܪytA۰ʰztΪL,ҥH" -"z||ݨoӨBJ]wCOAYOzSһݨDAoNz" -"ܡC\n" -"\n" -"IuhvsAHKܱzһݭnϥΪLءC" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "SMB (Windows 9x/NT) Printer Options" -msgstr "ھF (SMB, Windows 9x/NT) Lﶵ" - -#: ../../printer/main.pm:1 -#, c-format -msgid "URI: %s" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Valid user list changed, rewriting config file." -msgstr "" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "mkinitrd optional arguments" -msgstr "mkinitrd ﶵ" - -#: ../../share/advertising/03-software.pl:1 -#, c-format -msgid "" -"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or " -"Kmail, create your documents with OpenOffice.org." -msgstr "" -" Mozilla Konqueror bWĮA Evolution Kmail \ŪlA" -"OpenOffice.org ЫرzɡC" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "Protocol for the rest of the world" -msgstr "Lw" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Print test pages" -msgstr "CLխ..." - -#: ../../standalone/drakconnect:1 -#, fuzzy, c-format -msgid "Activate now" -msgstr "ߧYҰ" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "64 MB or more" -msgstr "16 MB Ϊ̧h" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Please select the test pages you want to print.\n" -"Note: the photo test page can take a rather long time to get printed and on " -"laser printers with too low memory it can even not come out. In most cases " -"it is enough to print the standard test page." -msgstr "" -"zAnCLխC\n" -"`N: ϧδխ|O[ɶӦCLA\n" -"YOӦLwiΰOܤ֪ܡACLɶ\n" -"|ݭnO[ɶC\n" -"@뱡pӻAܼзǪխNܨFC" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Please select the device where your %s is attached" -msgstr "" -"ScannerDrake {Lkz %s yC\n" -"пܱzثeyw˪˸m" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Not formatted\n" -msgstr "榡\n" - -#: ../../standalone/draksec:1 -#, c-format -msgid "Periodic Checks" -msgstr "gˬd" - -#: ../../standalone/drakpxe:1 -#, fuzzy, c-format -msgid "PXE Server Configuration" -msgstr "dhcpd AȥD]w" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup the system files before:" -msgstr "eҳƥtΪɮסG" - -#: ../../security/level.pm:1 -#, c-format -msgid "" -"This is the standard security recommended for a computer that will be used " -"to connect to the Internet as a client." -msgstr "зǪtΦwʳ]wAijΦb~suDWϥΡC" - -#: ../../any.pm:1 -#, c-format -msgid "First floppy drive" -msgstr "Ĥ@xn" - -#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 -#: ../../standalone/logdrake:1 -#, c-format -msgid "/File/_Quit" -msgstr "/ɮ/ (_Q)" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Dvorak" -msgstr "Dvorak" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Choose the new size" -msgstr "sjp" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Media class" -msgstr "CO" - -#: ../../standalone/XFdrake:1 -#, c-format -msgid "You need to log out and back in again for changes to take effect" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "The %s is not known by this version of Scannerdrake." -msgstr "Mandrake Linux ثe٤䴩 %s" - -#: ../../lang.pm:1 -#, c-format -msgid "Faroe Islands" -msgstr "Faroe Islands" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Restart XFS" -msgstr "sҰ XFS A" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Add host/network" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Scannerdrake will not be started now." -msgstr "" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "Model name" -msgstr "ҲզW" - -#: ../../lang.pm:1 -#, c-format -msgid "Albania" -msgstr "Albania" - -#: ../../lang.pm:1 -#, c-format -msgid "British Indian Ocean Territory" -msgstr "British Indian Ocean Territory" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Normal Mode" -msgstr "@Ҧ" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "No CD-R/DVD-R in drive!" -msgstr "J CDR/DVDRI" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer connection type" -msgstr "Lsu覡" - -#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 -#, c-format -msgid "No network adapter on your system!" -msgstr "ztΨèSdsb" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "Network %s" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Malayalam" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Option %s out of range!" -msgstr "%s ѼƶWX\d" - -#: ../../standalone/net_monitor:1 -#, fuzzy, c-format -msgid "Connect %s" -msgstr "su" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Restarting CUPS..." -msgstr "sҰ XFS A" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printing/Scanning/Photo Cards on \"%s\"" -msgstr "" - -#: ../../install_steps.pm:1 -#, c-format -msgid "Duplicate mount point %s" -msgstr "ƪI %s" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, run chkrootkit checks." -msgstr "" - -#: ../../network/tools.pm:1 -#, c-format -msgid "Connection Configuration" -msgstr "suպA" - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "Unknown|Generic" -msgstr "|@" - -#: ../../help.pm:1 -#, c-format -msgid "" -"At the time you are installing Mandrake Linux, it is likely that some\n" -"packages have been updated since the initial release. Bugs may have been\n" -"fixed, security issues resolved. To allow you to benefit from these\n" -"updates, you are now able to download them from the Internet. Check \"%s\"\n" -"if you have a working Internet connection, or \"%s\" if you prefer to\n" -"install updated packages later.\n" -"\n" -"Choosing \"%s\" will display a list of places from which updates can be\n" -"retrieved. You should choose one nearer to you. A package-selection tree\n" -"will appear: review the selection, and press \"%s\" to retrieve and install\n" -"the selected package(s), or \"%s\" to abort." -msgstr "" -"oɭԱzwgMandrake-LinuxwˤFAUӦw˵{N|wƱziM" -"swˡCC@ Linux wˮMoAYOJ즳MwʰD" -"Ϊ̬OήɡALinux tӳ|oGwiXsMѵϥΪ̦w" -"sCFTOztΪwAw˵{zbw˦ntΫA{bNߧYz" -"LsuosMiwˡCYOznw˧sMܡAпܡu%svA" -"ܽпܡu%svC\n" -"\n" -"Aܡu%svɡAtαN|ܥiѧsxMTzܡAбzܤ@" -"zaxCUӦw˵{|suӯx^sTAɭԽп" -"AnsءAIu%svonw˧sMAΪ̬Oܡu%svM" -"sC" - -#: ../../lang.pm:1 -#, c-format -msgid "Myanmar" -msgstr "Myanmar" - -#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1 -#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1 -#: ../../standalone/draksplash:1 ../../standalone/harddrake2:1 -#: ../../standalone/logdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "Quit" -msgstr "" - -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Auto allocate" -msgstr "۰ʤt" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Check bad blocks?" -msgstr "ˬdaϰ?" - -#: ../../harddrake/data.pm:1 -#, fuzzy, c-format -msgid "Other MultiMedia devices" -msgstr "L˸m" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "burner" -msgstr "L" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Bug Description/System Information" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid " (Default is all users)" -msgstr "w]L" - -#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "No remote machines" -msgstr "(oӾW)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"Welcome to the Printer Setup Wizard\n" -"\n" -"This wizard will help you to install your printer(s) connected to this " -"computer.\n" -"\n" -"If you have printer(s) connected to this machine, Please plug it/them in on " -"this computer and turn it/them on so that it/they can be auto-detected.\n" -"\n" -" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " -"to set up your printer(s) now." -msgstr "" -"\n" -"wӨL]wF\n" -"\n" -"Uӳ]wFN|ɱzL]wA]tLC\n" -"YOzn]wLOw˦bAWAХT{AuwTAq" -"åBwg}ҡAHK۰ʰALC\n" -"\n" -"AT{SDɡAIuU@BvAΪ̬OIuv]wC" - -#: ../../any.pm:1 -#, c-format -msgid "Authentication NIS" -msgstr "NIS {" - -#: ../../any.pm:1 -#, c-format -msgid "" -"Option ``Restrict command line options'' is of no use without a password" -msgstr "ﶵuOѼơvbS]wKXpU|" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Internet Connection Sharing currently enabled" -msgstr "Internet suɥثeBiΪA" - -#: ../../lang.pm:1 -#, c-format -msgid "United Arab Emirates" -msgstr "United Arab Emirates" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Card IO_0" -msgstr "d IO_0" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Disable Local Config" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Thailand" -msgstr "" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Card IO_1" -msgstr "d IO_1" - -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Search:" -msgstr "M:" - -#: ../../lang.pm:1 -#, c-format -msgid "Kazakhstan" -msgstr "Kazakhstan" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Routers:" -msgstr "" - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Write" -msgstr "gJ %s" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Display all available remote CUPS printers" -msgstr "sLM (sM价ݥiΪҦ CUPS L)" - -#: ../../install_steps_newt.pm:1 -#, c-format -msgid "Mandrake Linux Installation %s" -msgstr "Mandrake Linux w˵{ %s" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "Unknown driver" -msgstr "Xʵ{" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Thai keyboard" -msgstr "L" - -#: ../../lang.pm:1 -#, c-format -msgid "Bouvet Island" -msgstr "Bouvet Island" - -#: ../../network/modem.pm:1 -#, c-format -msgid "Dialup options" -msgstr "ﶵ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "If no port is given, 631 will be taken as default." -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Per client system configuration files:\n" -" \tThrough clusternfs, each diskless client can have its own unique " -"configuration files\n" -" \ton the root filesystem of the server. By allowing local client " -"hardware configuration, \n" -" \tclients can customize files such as /etc/modules.conf, /etc/" -"sysconfig/mouse, \n" -" \t/etc/sysconfig/keyboard on a per-client basis.\n" -"\n" -" Note: Enabling local client hardware configuration does enable root " -"login to the terminal \n" -" server on each client machine that has this feature enabled. Local " -"configuration can be\n" -" turned back off, retaining the configuration files, once the client " -"machine is configured." -msgstr "" - -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"Change your Cd-Rom!\n" -"\n" -"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " -"done.\n" -"If you don't have it, press Cancel to avoid installation from this Cd-Rom." -msgstr "" -"F!\n" -"\n" -"ЧRW \"%s\" wˤAMUTw~C\n" -"YOzèSoiwˤAILo@w˪ʧ@C" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Polish" -msgstr "i" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Mandrake Online" -msgstr "Mandrake Online uWA" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\t-Network by webdav.\n" -msgstr "\t- (zL webdav)\n" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid ", multi-function device on a parallel port" -msgstr "AæCh\˸m \\/*%s" - -#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 -#, c-format -msgid "" -"No ethernet network adapter has been detected on your system. Please run the " -"hardware configuration tool." -msgstr "ztΰ즳dsbAЭsw]wuC" - -#: ../../network/network.pm:1 ../../standalone/drakconnect:1 -#: ../../standalone/drakgw:1 -#, c-format -msgid "Netmask" -msgstr "Bn" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "No hard drives found" -msgstr "䤣wи˸m" - -#: ../../mouse.pm:1 -#, c-format -msgid "2 buttons" -msgstr "ӫ" - -#: ../../mouse.pm:1 -#, c-format -msgid "Logitech CC Series" -msgstr "Logitech CC Series" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "What kind is your ISDN connection?" -msgstr "z ISDN su ?" - -#: ../../any.pm:1 -#, c-format -msgid "Label" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Save on floppy" -msgstr "xs]wϤ" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Check open ports" -msgstr " port %s " - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Edit selected printer" -msgstr " %s " - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer auto-detection" -msgstr "L۰ʰ" - -#: ../../network/isdn.pm:1 -#, fuzzy, c-format -msgid "Which of the following is your ISDN card?" -msgstr "z ISDN d ?" - -#: ../../services.pm:1 -#, c-format -msgid "" -"NFS is a popular protocol for file sharing across TCP/IP networks.\n" -"This service provides NFS server functionality, which is configured via the\n" -"/etc/exports file." -msgstr "" -"NFS O@ӱ`ΪqTwAѸɨLDɮרtΡC\n" -"oӪAȶط|̷ӨtΪ /etc/exports ɮ׳]wӱҰ NFS ɥ\C" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Msec" -msgstr "Msec w]w" - -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "" -"=> Notice, a label changed:\n" -"%s" -msgstr "" -"=> Ъ`NAӶؤwgܧF:\n" -"%s" - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "Number of capture buffers:" -msgstr "^wĪƶqG" - -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "Your choice? (0/1, default `%s') " -msgstr "z? (0/1Aw] `%s') " - -#: ../../help.pm:1 -#, c-format -msgid "" -"Any partitions that have been newly defined must be formatted for use\n" -"(formatting means creating a file system).\n" -"\n" -"At this time, you may wish to reformat some already existing partitions to\n" -"erase any data they contain. If you wish to do that, please select those\n" -"partitions as well.\n" -"\n" -"Please note that it is not necessary to reformat all pre-existing\n" -"partitions. You must reformat the partitions containing the operating\n" -"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" -"reformat partitions containing data that you wish to keep (typically\n" -"\"/home\").\n" -"\n" -"Please be careful when selecting partitions. After formatting, all data on\n" -"the selected partitions will be deleted and you will not be able to recover\n" -"it.\n" -"\n" -"Click on \"%s\" when you are ready to format partitions.\n" -"\n" -"Click on \"%s\" if you want to choose another partition for your new\n" -"Mandrake Linux operating system installation.\n" -"\n" -"Click on \"%s\" if you wish to select partitions that will be checked for\n" -"bad blocks on the disk." -msgstr "" -"sإߪΰϳ榡ƫ~ӨϥΡC(榡ƥ]tإɮרt)C\n" -"\n" -"MAoɭԱz]iHܮ榡ƳoǤwgsbΰϡA쥻̭ƳN|" -"CYOnϥΦءAпܭn榡ƪΰϡCЪ`N@UAäOҦewg" -"sbΰϳos榡ơAq`z]\|NtιX\hΰϷ@P" -"~A u\\vBuusrvBu/varvPu/homevW߹@ӤΰϨϥΡCo" -"pAϥΪ̡u/homevΰϤWs\hơAzNܤݭns榡ơC\n" -"\n" -"znܭn榡ƪΰϮɡAФp߿ܡA]ܡAzƱN|@hL" -"^AA]LkϦ^ӤFA]znSOp߿ܡC\n" -"\n" -"zܦnAIy%szAw˵{|i榡ƪʧ@C\n" -"\n" -"YOzIFy%szAN||eާ@BJA~ܭnw˪ΰϡA]z" -"IFy%szثAN|ѬO_niayyʧ@ﶵC" - -#: ../../keyboard.pm:1 -#, c-format -msgid "French" -msgstr "k" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Czech (QWERTY)" -msgstr "J (QWERTY)" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Allow X Window connections" -msgstr "@ modem su覡" - -#: ../../standalone/service_harddrake:1 -#, fuzzy, c-format -msgid "Hardware probing in progress" -msgstr "b" - -#: ../../standalone/drakgw:1 -#, fuzzy, c-format -msgid "Net Device" -msgstr "Xinetd A" - -#: ../../install_steps_interactive.pm:1 ../../steps.pm:1 -#, c-format -msgid "Summary" -msgstr "`" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " -"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." -msgstr "" -" (æCG/dev/lp0A/dev/lp1A...... ۷ LPT1:ALPT2:....\n" -"Ĥ@x USB LOG/dev/usb/lp0AĤGxG/dev/usb/lp1)C" - -#: ../../network/netconnect.pm:1 ../../network/tools.pm:1 -#, c-format -msgid "Next" -msgstr "U@B" - -#: ../../bootloader.pm:1 -#, c-format -msgid "You can't install the bootloader on a %s partition\n" -msgstr "z}z{w˦b %s ΰϤW\n" - -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "CHAP" -msgstr "CHAP" - -#: ../../lang.pm:1 -#, c-format -msgid "Puerto Rico" -msgstr "Puerto Rico" - -#: ../../network/network.pm:1 -#, fuzzy, c-format -msgid "(bootp/dhcp/zeroconf)" -msgstr "(bootp/dhcp)" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "" -"\n" -"Welcome.\n" -"\n" -"The parameters of the auto-install are available in the sections on the left" -msgstr "" -"\n" -"w!\n" -"\n" -"۰ʦwˤiΪѼƶسb䪺Ϭq" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "" -"package 'ImageMagick' is required to be able to complete configuration.\n" -"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" -msgstr "" -"tλݭnwˤW ImageMagick M~i]wC\n" -"I \"Tw\" w˸ӮMAΪ̬OI \"\" w" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Lithuanian \"number row\" QWERTY" -msgstr "߳{ (number row, QWERTY )" - -#: ../../install_any.pm:1 -#, c-format -msgid "" -"The following packages will be removed to allow upgrading your system: %s\n" -"\n" -"\n" -"Do you really want to remove these packages?\n" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Anguilla" -msgstr "Anguilla" - -#: ../../any.pm:1 -#, c-format -msgid "NIS Domain" -msgstr "NIS W" - -#: ../../lang.pm:1 -#, c-format -msgid "Antarctica" -msgstr "Antarctica" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"- User Files:\n" -msgstr "" -"\n" -"- ϥΪɮ:\n" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Mount options" -msgstr "Ѽ" - -#: ../../lang.pm:1 -#, c-format -msgid "Jamaica" -msgstr "R[" - -#: ../../services.pm:1 -#, fuzzy, c-format -msgid "" -"Assign raw devices to block devices (such as hard drive\n" -"partitions), for the use of applications such as Oracle or DVD players" -msgstr "" -" block o϶˸m raw ˸m (NOwЪΰ)A\n" -"@O oracle oS{ϥΡC" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Please wait, preparing installation..." -msgstr "bdzƦwˤu@..." - -#: ../../keyboard.pm:1 -#, c-format -msgid "Czech (QWERTZ)" -msgstr "J (QWERTZ)" - -#: ../../network/network.pm:1 -#, c-format -msgid "Track network card id (useful for laptops)" -msgstr "d ID (Oq۷)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "The port number should be an integer!" -msgstr "Port ӬƦr" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "You must choose an image file first!" -msgstr "zݭnܬMɮסI" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore from Hard Disk." -msgstr "ѵwЦ^sC" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Add to LVM" -msgstr "[JϺа}C" - -#: ../../network/network.pm:1 -#, c-format -msgid "DNS server" -msgstr "DNS A" - -#: ../../lang.pm:1 -#, c-format -msgid "Trinidad and Tobago" -msgstr "Trinidad and Tobago" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "LPD and LPRng do not support IPP printers.\n" -msgstr "PD P LPRng 䴩 IPP LC\n" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Host name or IP." -msgstr "DW" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "/_Edit" -msgstr "s" - -#: ../../fsedit.pm:1 -#, c-format -msgid "simple" -msgstr "" - -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Clear all" -msgstr "M" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "No test pages" -msgstr "CLխ" - -#: ../../lang.pm:1 -#, c-format -msgid "Falkland Islands (Malvinas)" -msgstr "Falkland Islands (Malvinas)" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Adapter %s: %s" -msgstr "d %sG %s" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Boot disk creation" -msgstr "s@}Ϥ" - -# calendar/gui/dialogs/cal-prefs-dialog.glade.h:30 -# calendar/gui/event-editor.c:475 -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Monday" -msgstr "P@" - -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Unknown model" -msgstr "" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, check files/directories writable by everybody." -msgstr "" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "authentication" -msgstr "{Ҥ覡" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup Now" -msgstr "ߧYƥ" - -#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 -#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 -#: ../../standalone/printerdrake:1 -#, c-format -msgid "/_File" -msgstr "/ɮ (_F)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Removing printer from Star Office/OpenOffice.org/GIMP" -msgstr " Star Office/OpenOffice.org/GIMP L" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Launch packet filtering for Linux kernel 2.2 series, to set\n" -"up a firewall to protect your machine from network attacks." -msgstr "" -"Ұ Linux Kernel 2.2 tCAΨӫO@z|D\n" -"~ӪC" - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Editable" -msgstr "" - -#: ../../network/ethernet.pm:1 -#, fuzzy, c-format -msgid "Which dhcp client do you want to use ? (default is dhcp-client)" -msgstr "" -"znϥέ@ dhcp ϥκݵ{?\n" -"w]O dhcp-client" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Tamil (ISCII-layout)" -msgstr "Z̺ (TSCII)" - -#: ../../lang.pm:1 -#, c-format -msgid "Mayotte" -msgstr "Mayotte" - -#: ../../security/help.pm:1 -#, c-format -msgid "Set shell commands history size. A value of -1 means unlimited." -msgstr "" - -#: ../../install_steps_gtk.pm:1 -#, fuzzy, c-format -msgid "%d KB\n" -msgstr "jpG %d KB\n" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Creating auto install floppy..." -msgstr "bs@۰ʦw˺Ϥ" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Searching for scanners ..." -msgstr "iΪL" - -#: ../../lang.pm:1 -#, fuzzy, c-format -msgid "Russia" -msgstr "Xù" - -#: ../../steps.pm:1 -#, c-format -msgid "Partitioning" -msgstr "j" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "ethernet card(s) detected" -msgstr " ethernet d" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Syslog" -msgstr "Syslog (tΰO)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Can't create catalog!" -msgstr "Lkإ catalog T" - -#: ../../share/advertising/11-mnf.pl:1 -#, c-format -msgid "" -"Complete your security setup with this very easy-to-use software which " -"combines high performance components such as a firewall, a virtual private " -"network (VPN) server and client, an intrusion detection system and a traffic " -"manager." -msgstr "" - -#: ../../fsedit.pm:1 -#, c-format -msgid "Not enough free space for auto-allocating" -msgstr "SŶ۰ʰtm" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Set root password" -msgstr "]w root KX" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Enable IP spoofing protection" -msgstr "" - -#: ../../harddrake/sound.pm:1 -#, fuzzy, c-format -msgid "" -"There's no free driver for your sound card (%s), but there's a proprietary " -"driver at \"%s\"." -msgstr "ثeOSS/ALSA Xʵ{䴩Aĥd (%s)AҲլ \"%s\"" - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Group :" -msgstr "sաG" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "After resizing partition %s, all data on this partition will be lost" -msgstr "bܤΰ %s jpHAҦboӤΰϤWƳ|QM" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Internet connection configuration" -msgstr "Internet su]w" - -#: ../../security/help.pm:1 -#, c-format -msgid "Add the name as an exception to the handling of password aging by msec." -msgstr "" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Scanning for TV channels" -msgstr "byqWD" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Kernel:" -msgstr "֤ߡG" - -#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 -#, c-format -msgid "/_About..." -msgstr "/ (_A)" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Bengali" -msgstr "s[" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Preference: " -msgstr "]wȡG " - -#: ../../install_steps_interactive.pm:1 ../../services.pm:1 -#, c-format -msgid "Services: %d activated for %d registered" -msgstr "Aȵ{G %d wgҰʡA@ %d U" - -#: ../../any.pm:1 -#, c-format -msgid "Create a bootdisk" -msgstr "s@}Ϥ" - -#: ../../lang.pm:1 -#, c-format -msgid "Solomon Islands" -msgstr "Solomon Islands" - -#: ../../standalone/mousedrake:1 -#, fuzzy, c-format -msgid "Please test your mouse:" -msgstr "дշƹ" - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "(module %s)" -msgstr "(Ҳ %s)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Workgroup" -msgstr "u@s" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer host name or IP" -msgstr "LDW٩άOIP" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Host Path or Module" -msgstr "D|άOҲզW" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Name of printer should contain only letters, numbers and the underscore" -msgstr "LWӥu]t^rBƦrPuor" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Show current interface configuration" -msgstr "ܥثeպA]w" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Add Printer" -msgstr "L" - -#: ../../security/help.pm:1 -#, c-format -msgid "" -"The argument specifies if clients are authorized to connect\n" -"to the X server from the network on the tcp port 6000 or not." -msgstr "" - -#: ../../help.pm:1 -#, c-format -msgid "Development" -msgstr "{}ox" - -#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1 -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1 -#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 -#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Done" -msgstr "" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "Web Server" -msgstr "Web A" - -#: ../../lang.pm:1 -#, c-format -msgid "Chile" -msgstr "Chile" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\tDo not include System Files\n" -msgstr "\tn]ttɮ\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"The inkjet printer drivers provided by Lexmark only support local printers, " -"no printers on remote machines or print server boxes. Please connect your " -"printer to a local port or configure it on the machine where it is connected " -"to." -msgstr "" -"Lexmark ҴѪQLXʵ{u䴩L\n" -"CL\ANLkϥγoݦLCнT{zثe\n" -"LwgTszaݹqWA]wӦL\n" -"smC" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Your multi-function device was configured automatically to be able to scan. " -"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " -"scanner when you have more than one) from the command line or with the " -"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " -"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" -"\" menu. Call also \"man scanimage\" on the command line to get more " -"information.\n" -"\n" -"Do not use \"scannerdrake\" for this device!" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "(already added %s)" -msgstr "( %s wg[J)" - -#: ../../any.pm:1 -#, fuzzy, c-format -msgid "Bootloader installation in progress" -msgstr "w˶}{" - -#: ../../printer/main.pm:1 -#, c-format -msgid ", using command %s" -msgstr "AϥΩRO %s" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Alt and Shift keys simultaneously" -msgstr "Alt P Shift զX" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Flags" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Add/Del Users" -msgstr "sW/RϥΪ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Host/network IP address missing." -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "weekly" -msgstr "Cg" - -#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1 -#, c-format -msgid "Settings" -msgstr "]w" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "The entered host/network IP is not correct.\n" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Create/Transfer backup keys for SSH" -msgstr "" -"إ/ǰe\n" -"ƥ SSH ɮ" - -#: ../../any.pm:1 -#, fuzzy, c-format -msgid "Here is the full list of available countries" -msgstr "UMOiѿܪLC" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Alternative test page (A4)" -msgstr "A4 ȱiCLխ" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"If you have all the CDs in the list below, click Ok.\n" -"If you have none of those CDs, click Cancel.\n" -"If only some CDs are missing, unselect them, then click Ok." -msgstr "" -"pGzUM椺ҦCX CD ФAпܽTwC\n" -"pGSܡAпܨC\n" -"pG@ǶرzèSܡAӶبAMUTw~C" - -#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 -#, c-format -msgid "Wait please" -msgstr "еy" - -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "PAP" -msgstr "PAP" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup user files" -msgstr "ƥϥΪɮ" - -# ui/evolution-calendar.xml.h:40 -# ui/evolution-event-editor.xml.h:66 -# ui/evolution-task-editor-dialog.xml.h:79 -# ui/evolution.xml.h:58 -#: ../../diskdrake/dav.pm:1 -#, c-format -msgid "New" -msgstr "sW" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"This is the most crucial decision point for the security of your GNU/Linux\n" -"system: you have to enter the \"root\" password. \"Root\" is the system\n" -"administrator and is the only user authorized to make updates, add users,\n" -"change the overall system configuration, and so on. In short, \"root\" can\n" -"do everything! That is why you must choose a password that is difficult to\n" -"guess - DrakX will tell you if the password that you chose too easy. As you\n" -"can see, you are not forced to enter a password, but we strongly advise you\n" -"against this. GNU/Linux is just as prone to operator error as any other\n" -"operating system. Since \"root\" can overcome all limitations and\n" -"unintentionally erase all data on partitions by carelessly accessing the\n" -"partitions themselves, it is important that it be difficult to become\n" -"\"root\".\n" -"\n" -"The password should be a mixture of alphanumeric characters and at least 8\n" -"characters long. Never write down the \"root\" password -- it makes it far\n" -"too easy to compromise a system.\n" -"\n" -"One caveat -- do not make the password too long or complicated because you\n" -"must be able to remember it!\n" -"\n" -"The password will not be displayed on screen as you type it in. To reduce\n" -"the chance of a blind typing error you will need to enter the password\n" -"twice. If you do happen to make the same typing error twice, this\n" -"``incorrect'' password will be the one you will have use the first time you\n" -"connect.\n" -"\n" -"If you wish access to this computer to be controlled by an authentication\n" -"server, click the \"%s\" button.\n" -"\n" -"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" -"services, select the appropriate one for \"%s\". If you do not know which\n" -"one to use, you should ask your network administrator.\n" -"\n" -"If you happen to have problems with remembering passwords, if your computer\n" -"will never be connected to the internet or that you absolutely trust\n" -"everybody who uses your computer, you can choose to have \"%s\"." -msgstr "" -"oO GNU/Linux tΦw]w: Aݭn]wtκzrootKXCroot Ot" -"Ϊz̡A̰tvAƦvHA]wtΪҦB" -"@C蹳Oإ߱bAstήMAzɮרtεC\n" -"ijz]w root tκz̪KXɡAӱKXnL²AHKeDLHV" -"XӫcN}aztΡCo]wKXɡAYOKXL²Ϊ̬OWhʪܡA" -"{N|ĵizݭnsAJ@MC\n" -"\n" -"KXiH]t@i^rrA]t^rrBťաBƦrAi]tj" -"pgVXJC~AKXijܤ֦8ӦrΪ̧hCAӴNOntκ" -"zKXgbȤWΪ̬OqWA]iQѨBspo͡C\n" -"\n" -"MAKX]ΨӪA]ӪieѰOAƦܬOJɮe~C\n" -"\n" -"zbJKXɡAùW|ܥXAںVJeCt~NOzݭnJ⦸HK" -"TwҿJKXSC\n" -"\n" -"bMaҦw˪ҡAzU٥iHܬO_nϥ NISBLDAPAs@" -"b{Ҫ覡C\n" -"\n" -" LDAPBNIS {Ҫ覡AYOADzҦbϥγo{Ҥ覡ܡAz]\" -"n\"ݭnVz̸߰ݬTHK]wϥΡC\n" -"\n" -"YO{Ҥ覡NO¸ӹqWb覡AܨϥΥaݱKXɮاYiC" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Name resolution spoofing protection" -msgstr "" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"At this point, DrakX will allow you to choose the security level desired\n" -"for the machine. As a rule of thumb, the security level should be set\n" -"higher if the machine will contain crucial data, or if it will be a machine\n" -"directly exposed to the Internet. The trade-off of a higher security level\n" -"is generally obtained at the expense of ease of use.\n" -"\n" -"If you do not know what to choose, stay with the default option." -msgstr "" -"UӡAdzƿܨtΦwŪءC@ӻAYOҶVSҤUA" -"xsƴNwʪDҶqC۹ӻAtΩҨϥΪw˵Ť]N" -"ӶVAHKƫOs|wCо\ŪѦҤU MSEC `eAHK" -"oho譱TC\n" -"YOzDӦpܪܡAϥιw]ȴNiHFC" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Load from floppy" -msgstr "JnФ]w" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "The following printer was auto-detected. " -msgstr "" -"UCL\n" -"\n" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "Uses command %s" -msgstr "AϥΩRO %s" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Boot Floppy" -msgstr "}" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Norwegian" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Searching for new scanners ..." -msgstr "iΪL" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Apache World Wide Web Server" -msgstr "Apache WWW A" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "stepping of the cpu (sub model (generation) number)" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "select path to restore (instead of /)" -msgstr "ܭn^s|W (Nw] /)" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "Configure bootsplash picture" -msgstr "Lkإ߶}Jes" - -#: ../../lang.pm:1 -#, c-format -msgid "Georgia" -msgstr "Georgia" - -#: ../../lang.pm:1 -#, c-format -msgid "China" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid " (Make sure that all your printers are connected and turned on).\n" -msgstr " (нT{LwgsܹqTAåB}qF)C\n" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Reading data of installed printers..." -msgstr "iΪL" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid " Erase Now " -msgstr " R " - -#: ../../fsedit.pm:1 -#, c-format -msgid "server" -msgstr "" - -#: ../../install_any.pm:1 -#, c-format -msgid "Insert a FAT formatted floppy in drive %s" -msgstr "Цb %s Jwg榡(FAT榡)ϺФ" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "yes means the processor has an arithmetic coprocessor" -msgstr "" - -#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Please Wait... Applying the configuration" -msgstr "еy... bMθӳ]w" - -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm:1 -#, c-format -msgid "Welcome to GRUB the operating system chooser!" -msgstr "Welcome to GRUB the operating system chooser!" - -#: ../../bootloader.pm:1 -#, c-format -msgid "Grub" -msgstr "Grub }{" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "SCSI controllers" -msgstr "" - -#: ../../printer/main.pm:1 -#, c-format -msgid " on LPD server \"%s\", printer \"%s\"" -msgstr " LPD D \"%s\"AL \"%s\"" - -#: ../../standalone/drakedm:1 -#, c-format -msgid "Choosing a display manager" -msgstr "" - -#: ../../network/ethernet.pm:1 ../../network/network.pm:1 -#, fuzzy, c-format -msgid "Zeroconf Host name" -msgstr "DW" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Custom setup/crontab entry:" -msgstr "" - -#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "IP address should be in format 1.2.3.4" -msgstr "IP }n 1.2.3.4 榡ӿJ" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Configure CUPS printing system" -msgstr "ܧCLt" - -#: ../../lang.pm:1 -#, c-format -msgid "Ecuador" -msgstr "Ecuador" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "Add an item" -msgstr "sW" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "The printers on this machine are available to other computers" -msgstr "" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "I can't find needed image file `%s'." -msgstr "ڧ䤣oӭnɮ %s C" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "No sound card detected. Try \"harddrake\" after installation" -msgstr "SĥdCЦbw˫ \"harddrake\" i]w" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "" -"Invalid port given: %s.\n" -"The proper format is \"port/tcp\" or \"port/udp\", \n" -"where port is between 1 and 65535." -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Shell" -msgstr "Shell {" - -#: ../../lang.pm:1 -#, c-format -msgid "Sao Tome and Principe" -msgstr "Sao Tome and Principe" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "PCI" -msgstr "PCI" - -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Can't login using username %s (bad password?)" -msgstr "Lkϥ %s bnJt (KX~H)" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Azerbaidjani (latin)" -msgstr "Ĭp@M (latin)" - -#: ../../standalone/drakbug:1 -#, fuzzy, c-format -msgid "Package not installed" -msgstr "|w" - -#: ../../lang.pm:1 -#, c-format -msgid "American Samoa" -msgstr "American Samoa" - -#: ../../share/advertising/12-mdkexpert.pl:1 -#, c-format -msgid "Become a MandrakeExpert" -msgstr " MandrakeExpert Ma" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Protocol" -msgstr "qTw" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Copy fonts on your system" -msgstr "ƻsrܨt" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Harddrake help" -msgstr "Harddrake " - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Bogomips" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Mandrake Terminal Server Configuration" -msgstr "Mandrake Terminal Server ]w" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -" DrakBackup Report Details\n" -"\n" -"\n" -msgstr "" -"\n" -" DrakBackup Ƴƥӥ\n" -"\n" -"\n" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore all backups" -msgstr "^sҦƥ" - -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid " on parallel port #%s" -msgstr "æCW \\/*%s" - -#: ../../security/help.pm:1 -#, c-format -msgid "" -"Set the password minimum length and minimum number of digit and minimum " -"number of capitalized letters." -msgstr "" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, check open ports." -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "This may take a moment to erase the media." -msgstr "RӴC˸mݭnO@ǮɶC" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "You can't select/unselect this package" -msgstr "ziHoӮMA" - -#: ../../keyboard.pm:1 ../../diskdrake/interactive.pm:1 -#: ../../harddrake/sound.pm:1 ../../network/modem.pm:1 -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Warning" -msgstr "ĵi" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"- Other Files:\n" -msgstr "" -"\n" -"- Lɮ:\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remote host name" -msgstr "ݥDW" - -#: ../../any.pm:1 -#, c-format -msgid "access to X programs" -msgstr "s X oͿ~" - -#: ../../install_interactive.pm:1 -#, fuzzy, c-format -msgid "Computing the size of the Windows partition" -msgstr "ϥ Windows ΰϩҳѾliΪŶ" - -#: ../../standalone/printerdrake:1 -#, c-format -msgid "/_Refresh" -msgstr "" - -#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Italy" -msgstr "qjQ" - -#: ../../lang.pm:1 -#, c-format -msgid "Cayman Islands" -msgstr "Cayman Islands" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Name of printer" -msgstr "LW" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "disable" -msgstr "" - -#: ../../fs.pm:1 ../../partition_table.pm:1 -#, c-format -msgid "error unmounting %s: %s" -msgstr "U %s ɵoͿ~G %s" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Do it!" -msgstr "a !" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "%s not responding" -msgstr "%s S`^" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Select model manually" -msgstr "ʿܫ" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Format" -msgstr "榡" - -#: ../../network/adsl.pm:1 -#, c-format -msgid "" -"The most common way to connect with adsl is pppoe.\n" -"Some connections use pptp, a few use dhcp.\n" -"If you don't know, choose 'use pppoe'" -msgstr "" -"` ADSL NOϥ pppoe {\n" -"dzsuOϥ pptp {AƦܦOϥ\n" -"dhcpCYOzMܡAпܨϥ pppoe" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Various" -msgstr "" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Zip" -msgstr "" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Left Alt key" -msgstr "k Alt " - -#: ../../standalone/logdrake:1 -#, fuzzy, c-format -msgid "Load setting" -msgstr "J]w" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"\n" -"Printerdrake could not determine which model your printer %s is. Please " -"choose the correct model from the list." -msgstr "" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Set selected printer as the default printer" -msgstr "ϥγoxLw]L" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"Mark the printers which you want to transfer and click \n" -"\"Transfer\"." -msgstr "" -"\n" -"IаOznǰeLءAMI \"ǰe\" YiC" - -#: ../../printer/data.pm:1 -#, c-format -msgid "PDQ" -msgstr "PDQ" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Albanian" -msgstr "ڥ" - -#: ../../lang.pm:1 -#, c-format -msgid "Lithuania" -msgstr "߳{" - -#: ../../any.pm:1 -#, c-format -msgid "Compact" -msgstr "KҦ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Detected model: %s %s" -msgstr "쪺G%s %s" - -#: ../../share/advertising/03-software.pl:1 -#, c-format -msgid "MandrakeSoft has selected the best software for you" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Local files" -msgstr "KX" - -#: ../../pkgs.pm:1 -#, c-format -msgid "maybe" -msgstr "iH@" - -#: ../../lang.pm:1 -#, c-format -msgid "Panama" -msgstr "Panama" - -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "Can't open %s!" -msgstr "Lk %s ( %s)" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "" -"Your graphic card seems to have a TV-OUT connector.\n" -"It can be configured to work using frame-buffer.\n" -"\n" -"For this you have to plug your graphic card to your TV before booting your " -"computer.\n" -"Then choose the \"TVout\" entry in the bootloader\n" -"\n" -"Do you have this feature?" -msgstr "" -"zܥdG䴩 TV-OUT s˸mA\n" -"ҥHoiܥdb frame-buffer ҦUu@C\n" -"\n" -"YOnϥΪܡAzݭnbAs}eJAܥdA\n" -"M \"TVout\" oӶض}\n" -"znϥγo\ܡH" - -#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Monitor" -msgstr "ù" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"You are about to set up printing to a Windows account with password. Due to " -"a fault in the architecture of the Samba client software the password is put " -"in clear text into the command line of the Samba client used to transmit the " -"print job to the Windows server. So it is possible for every user on this " -"machine to display the password on the screen by issuing commands as \"ps " -"auxwww\".\n" -"\n" -"We recommend to make use of one of the following alternatives (in all cases " -"you have to make sure that only machines from your local network have access " -"to your Windows server, for example by means of a firewall):\n" -"\n" -"Use a password-less account on your Windows server, as the \"GUEST\" account " -"or a special account dedicated for printing. Do not remove the password " -"protection from a personal account or the administrator account.\n" -"\n" -"Set up your Windows server to make the printer available under the LPD " -"protocol. Then set up printing from this machine with the \"%s\" connection " -"type in Printerdrake.\n" -"\n" -msgstr "" -"zثeϥΤ@ձbPKXHKs Windows DӶiCLu@CL" -"zݭn`NOA]tάOIs Samba {nsu Windows DAҥH" -"{ɷ|bROC[Wzҳ]wJbKXCoi|@ǦwʰDA観" -"ϥΪ̥iH ps auxOӬdݱzbKXeC\n" -"\n" -"ҥHijziHϥΤU覡G\n" -"\n" -"b Windows D]mݭnKXbAuGUESTvAMu}ӱbƦC" -"L\CЪ`NAdUn administrator b]wݭnKXAM᪽" -"ϥθ administrator nJA]oOܦMIC\n" -"\n" -"Ϊ̬OziH]wz Windows LP LPD wtXApzNiHb " -"Printerdrake {ϥΡu%svsui]wPCLC\n" -"\n" - -#: ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "65 thousand colors (16 bits)" -msgstr "6 U 5 d (16 줸)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"- Save on Hard drive on path: %s\n" -msgstr "" -"\n" -"- xswЪ|: %s\n" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Remove fonts on your system" -msgstr "ѱztβӦrɮ" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"Warning, the network adapter (%s) is already configured.\n" -"\n" -"Do you want an automatic re-configuration?\n" -"\n" -"You can do it manually but you need to know what you're doing." -msgstr "" -"ĵiAtκd (%s) wg]wLFC\n" -"\n" -"zTwn۰ʭs]wLH\n" -"\n" -"pGzSݨDAiHܤʤ覡]wC" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Graphical interface at startup" -msgstr "}ɱҰ X " - -#: ../../network/netconnect.pm:1 -#, c-format -msgid " adsl" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "format of floppies supported by the drive" -msgstr "" - -#: ../../network/tools.pm:1 -#, c-format -msgid "Firmware copy failed, file %s not found" -msgstr "" - -#: ../../raid.pm:1 -#, c-format -msgid "Not enough partitions for RAID level %d\n" -msgstr "ΰϼƥؤHΨӳ]wh %d Ϻа}C\n" - -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "local config: true" -msgstr "s]w" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"The following printers are configured. Double-click on a printer to change " -"its settings; to make it the default printer; or to view information about " -"it." -msgstr "" -"UCLwg]wLFAziHI䤤@ӶءA\n" -"iHdݤeTΪ̬Oק鷺e]wA]t]ww]LC" - -#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 -#, c-format -msgid "Connected" -msgstr "wsu" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Macedonian" -msgstr "y" - -#: ../../lang.pm:1 -#, c-format -msgid "Mali" -msgstr "Mali" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Bridges and system controllers" -msgstr "" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "/File/_Save" -msgstr "/ɮ/xs (_S)" - -#: ../../install_steps_gtk.pm:1 -#, fuzzy, c-format -msgid "No details" -msgstr "ԲӸT" - -#: ../../pkgs.pm:1 -#, c-format -msgid "very nice" -msgstr "n" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "Preview" -msgstr "s" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Remote Control" -msgstr "ݦL" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Please select media for backup..." -msgstr "пnƥϥΪ˸m..." - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Wrong email" -msgstr "" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "XFree86 server: %s\n" -msgstr "XFree86 A{G %s\n" - -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "Allow Thin Clients" -msgstr "sW/RΤ" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Georgian (\"Russian\" layout)" -msgstr "v (\"Xꦡ\" tm)" - -#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 -#: ../../standalone/printerdrake:1 -#, c-format -msgid "/_Options" -msgstr "/ﶵ (_O)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Your printer model" -msgstr "zL" - -#: ../../any.pm:1 -#, c-format -msgid "" -"\n" -"\n" -"(WARNING! You're using XFS for your root partition,\n" -"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" -"because XFS needs a very large driver)." -msgstr "" -"\n" -"\n" -"(ĵiIz root ΰϥثeOϥ XFS ɮרtΡA\n" -"ѩ XFS Xʵ{ӤjFAҥHs@}ɱNLk\n" -"TN XFS ҲXʵ{ɮשJ)C" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"- Delete hard drive tar files after backup.\n" -msgstr "" -"\n" -"- ƥRwФeƥ tar ɮסC\n" - -#: ../../standalone/drakpxe:1 -#, c-format -msgid "" -"No CD or DVD image found, please copy the installation program and rpm files." -msgstr "" - -#: ../../share/advertising/04-configuration.pl:1 -#, fuzzy, c-format -msgid "Mandrake's multipurpose configuration tool" -msgstr "Mandrake Terminal Server ]w" - -#: ../../standalone/drakbackup:1 ../../standalone/logdrake:1 -#, c-format -msgid "Save" -msgstr "xs" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "The %s is unsupported" -msgstr "ثe٤䴩o %s y" - -#: ../../services.pm:1 -#, c-format -msgid "Load the drivers for your usb devices." -msgstr "J usb ˸mһݭnXʵ{" - -#: ../../harddrake/data.pm:1 -#, fuzzy, c-format -msgid "Disk" -msgstr "" - -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Enter a printer device URI" -msgstr "JLҦb URI }" - -#: ../../share/advertising/01-thanks.pl:1 -#, c-format -msgid "" -"The success of MandrakeSoft is based upon the principle of Free Software. " -"Your new operating system is the result of collaborative work of the " -"worldwide Linux Community." -msgstr "" -"MandrakeSoft \AӦ۩ۥѳn骺oiǫhCMandrake Linux\n" -"\hs\PAOӦ۩@ Linux sVO@PGC" - -#: ../../lang.pm:1 -#, c-format -msgid "Israel" -msgstr "HC" - -#: ../../lang.pm:1 -#, c-format -msgid "French Guiana" -msgstr "French Guiana" - -#: ../../lang.pm:1 -#, c-format -msgid "default:LTR" -msgstr "default:LTR" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "A command line must be entered!" -msgstr "J㪺 URI }I" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Select user manually" -msgstr "ʿϥΪ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Transfer printer configuration" -msgstr "Lǰe]w" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Do you want to enable printing on the printers mentioned above?\n" -msgstr "zn}ҤWΪLCLAȶܡH\n" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Check additions/removals of suid root files" -msgstr "" - -#: ../../any.pm:1 -#, fuzzy, c-format -msgid "" -"For this to work for a W2K PDC, you will probably need to have the admin " -"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" -"add and reboot the server.\n" -"You will also need the username/password of a Domain Admin to join the " -"machine to the Windows(TM) domain.\n" -"If networking is not yet enabled, Drakx will attempt to join the domain " -"after the network setup step.\n" -"Should this setup fail for some reason and domain authentication is not " -"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " -"Domain, and Admin Username/Password, after system boot.\n" -"The command 'wbinfo -t' will test whether your authentication secrets are " -"good." -msgstr "" -"nb W2K PDC U`ϥΡAzݭnϥκz̥{b Windows Dܦr" -"U C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\"everyone /" -"allAM᭫sҰʧA W2K DC\n" -"zt~ٻݭnẕbKXAHK[J Windows(TM) 줺C\n" -"n}l[JeAХT{ATҰʡAnM DrakX {ݭn᭱" -"]wT~ioǨBJC\n" -"YOAo{w˵{]wnAA}o{Lk`ϥκ{ҪܡAШƫ" -" 'smbpasswd -j DOMAIN -U USER%PASSWORD' OA䤤 DOMAIN AWindows " -"W١AUSER P PASSWORD z̪bPKXC\n" -"̫ϥ 'wbinfo -t' սT{{ҥ\O_iH`u@C" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "%s (Port %s)" -msgstr "s" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use network connection to backup" -msgstr "ϥ FTP suƥ" - -#: ../../standalone/drakfloppy:1 -#, fuzzy, c-format -msgid "Kernel version" -msgstr "֤ߪ" - -#: ../../help.pm:1 -#, c-format -msgid "" -"It is now time to specify which programs you wish to install on your\n" -"system. There are thousands of packages available for Mandrake Linux, and\n" -"to make it simpler to manage the packages have been placed into groups of\n" -"similar applications.\n" -"\n" -"Packages are sorted into groups corresponding to a particular use of your\n" -"machine. Mandrake Linux has four predefined installations available. You\n" -"can think of these installation classes as containers for various packages.\n" -"You can mix and match applications from the various groups, so a\n" -"``Workstation'' installation can still have applications from the\n" -"``Development'' group installed.\n" -"\n" -" * \"%s\": if you plan to use your machine as a workstation, select one or\n" -"more of the applications that are in the workstation group.\n" -"\n" -" * \"%s\": if plan on using your machine for programming, choose the\n" -"appropriate packages from that group.\n" -"\n" -" * \"%s\": if your machine is intended to be a server, select which of the\n" -"more common services you wish to install on your machine.\n" -"\n" -" * \"%s\": this is where you will choose your preferred graphical\n" -"environment. At least one must be selected if you want to have a graphical\n" -"interface available.\n" -"\n" -"Moving the mouse cursor over a group name will display a short explanatory\n" -"text about that group. If you unselect all groups when performing a regular\n" -"installation (as opposed to an upgrade), a dialog will pop up proposing\n" -"different options for a minimal installation:\n" -"\n" -" * \"%s\": install the minimum number of packages possible to have a\n" -"working graphical desktop.\n" -"\n" -" * \"%s\": installs the base system plus basic utilities and their\n" -"documentation. This installation is suitable for setting up a server.\n" -"\n" -" * \"%s\": will install the absolute minimum number of packages necessary\n" -"to get a working Linux system. With this installation you will only have a\n" -"command line interface. The total size of this installation is about 65\n" -"megabytes.\n" -"\n" -"You can check the \"%s\" box, which is useful if you are familiar with the\n" -"packages being offered or if you want to have total control over what will\n" -"be installed.\n" -"\n" -"If you started the installation in \"%s\" mode, you can unselect all groups\n" -"to avoid installing any new package. This is useful for repairing or\n" -"updating an existing system." -msgstr "" - -#: ../../any.pm:1 ../../help.pm:1 -#, c-format -msgid "Accept user" -msgstr "ϥΪ" - -#: ../../help.pm:1 ../../diskdrake/dav.pm:1 -#, c-format -msgid "Server" -msgstr "Ax" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Left Shift key" -msgstr " \"Windows\" " - -#: ../../network/netconnect.pm:1 -#, fuzzy, c-format -msgid " local network" -msgstr "IP}" - -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "Bad choice, try again\n" -msgstr "aܡAЦAդ@M\n" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Syslog reports to console 12" -msgstr "" - -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, fuzzy, c-format -msgid "Search new servers" -msgstr "jMA" - -#: ../../lang.pm:1 -#, fuzzy, c-format -msgid "Heard and McDonald Islands" -msgstr "Heard Island and McDonald Islands" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "No alternative driver" -msgstr "ϥΥt~iѿܪXʵ{" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Toggle to expert mode" -msgstr "MaҦ" - -#: ../../printer/cups.pm:1 -#, c-format -msgid "(on this machine)" -msgstr "(oӾW)" - -#: ../../network/network.pm:1 -#, c-format -msgid "Gateway address should be in format 1.2.3.4" -msgstr "Gateway IP }n 1.2.3.4 榡ӿJ" - -#: ../../network/modem.pm:1 -#, c-format -msgid "" -"\"%s\" based winmodem detected, do you want to install needed software ?" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Looking at packages already installed..." -msgstr "bjMwgw˹LM..." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use Differential Backups" -msgstr "" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Driver" -msgstr "Xʵ{" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Linuxconf will sometimes arrange to perform various tasks\n" -"at boot-time to maintain the system configuration." -msgstr "Linuxconf {|b}ɰ@ǶءAվ@tΤ@DzպA]wC" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "DVD-R device" -msgstr "˸m]" - -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer on remote lpd server" -msgstr "ݪ lpd AL" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "" -"Before installing any fonts, be sure that you have the right to use and " -"install them on your system.\n" -"\n" -"-You can install the fonts the normal way. In rare cases, bogus fonts may " -"hang up your X Server." -msgstr "" -"iw˦reAаȥT{zAvsϥΡA\n" -"䤤]toǦrOTS~CnMAݱpUA\n" -"z X Ai|]TrɮצӤwC" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n" -"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n" -"detected and installed in the bootloader menu. If this is not the case, you\n" -"can add an entry by hand in this screen. Be careful to choose the correct\n" -"parameters.\n" -"\n" -"Yaboot's main options are:\n" -"\n" -" * Init Message: a simple text message displayed before the boot prompt.\n" -"\n" -" * Boot Device: indicates where you want to place the information required\n" -"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" -"to hold this information.\n" -"\n" -" * Open Firmware Delay: unlike LILO, there are two delays available with\n" -"yaboot. The first delay is measured in seconds and at this point, you can\n" -"choose between CD, OF boot, MacOS or Linux;\n" -"\n" -" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" -"After selecting Linux, you will have this delay in 0.1 second increments\n" -"before your default kernel description is selected;\n" -"\n" -" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" -"at the first boot prompt.\n" -"\n" -" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" -"Open Firmware at the first boot prompt.\n" -"\n" -" * Default OS: you can select which OS will boot by default when the Open\n" -"Firmware Delay expires." -msgstr "" -"Yaboot OMΨӵ NewWorld MacIntosh wqϥΪ}{CΨӱ" -" GNU/Linux, MacOS Ϊ̬O MacOSX oǧ@~tΡC@ӻA{N|tΥ" -"ewˤFǧ@~tΡAMzNiHܤKϥ Yaboot {ӱҰʩһݭnϥΪ" -"@~tҡCYoèSzثetΦw˪@~tҡAziHbo" -"ùWϥΤʤ覡sWһݭnءCЪ`N@UzUҿܨϥΪѼơC\n" -"\n" -"Yaboot DnѼƥ]t:\n" -"\n" -" * Init Messages: ΩX{}ܦrɡAwܪ@qreC\n" -"\n" -" * Boot Device: wznΨөmΨӱҰ GNU/Linux һݭn}˸mC\n" -"\n" -" * Open Firemare Delay: P LILO PaNOAYaboot ӥiΪdelayѼ" -"iHϥΡCĤ@ delay ѼƴNOΨӫwziHbh֮ɶ()ܨϥ " -"CD, OF boot, MacOS Ϊ̬O Linux Ӷi}ʧ@C\n" -"\n" -" * Kernel Boot Timeout: o timeout LILO delay ѼơA]NO" -"F@ӶثAnh[ɶ~uiU}ʧ@C@w]ɶO0.1 C\n" -"\n" -" * Enable CD Boot?: ]wӶءAӶ}_\ \"C\" إ CD }C\n" -"\n" -" * Enable OF Boot?: ]wӶءAӶ}_\ \"N\" } Open Firemare " -"Delay \C\n" -" * Default OS: @w]}ܶءC" - -# calendar/gui/dialogs/cal-prefs-dialog.glade.h:55 -# calendar/gui/event-editor.c:477 -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Wednesday" -msgstr "PT" - -#: ../../crypto.pm:1 ../../lang.pm:1 -#, c-format -msgid "Germany" -msgstr "w" - -#: ../../crypto.pm:1 ../../lang.pm:1 -#, c-format -msgid "Austria" -msgstr "Dw" - -#: ../../mouse.pm:1 -#, c-format -msgid "No mouse" -msgstr "Lƹ" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Choose your CD/DVD media size (MB)" -msgstr "пz CD/DVD eqjp" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Check permissions of files in the users' home" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Run \"sndconfig\" after installation to configure your sound card" -msgstr "Цbw˧A \"sndconfig\" ӳ]wĥd" - -#: ../../ugtk2.pm:1 -#, c-format -msgid "Collapse Tree" -msgstr "Y|𪬵c" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "Auto Install Configurator" -msgstr "۰ʦw˳]w{" - -#: ../../steps.pm:1 -#, c-format -msgid "Configure networking" -msgstr "]wsu" - -#: ../../any.pm:1 -#, c-format -msgid "Where do you want to install the bootloader?" -msgstr "znN}{w˦bӦm ?" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Your choice of preferred language will affect the language of the\n" -"documentation, the installer and the system in general. Select first the\n" -"region you are located in, and then the language you speak.\n" -"\n" -"Clicking on the \"%s\" button will allow you to select other languages to\n" -"be installed on your workstation, thereby installing the language-specific\n" -"files for system documentation and applications. For example, if you will\n" -"host users from Spain on your machine, select English as the default\n" -"language in the tree view and \"%s\" in the Advanced section.\n" -"\n" -"Note that you're not limited to choosing a single additional language. You\n" -"may choose several ones, or even install them all by selecting the \"%s\"\n" -"box. Selecting support for a language means translations, fonts, spell\n" -"checkers, etc. for that language will be installed. Additionally, the\n" -"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n" -"however that this is an experimental feature. If you select different\n" -"languages requiring different encoding the unicode support will be\n" -"installed anyway.\n" -"\n" -"To switch between the various languages installed on the system, you can\n" -"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n" -"language used by the entire system. Running the command as a regular user\n" -"will only change the language settings for that particular user." -msgstr "" -"пzw˹L{ҭnϥΪytCIyizsiHz\n" -"LytAӿytN|@Pw˨tΤC\n" -"Aܦw˩һݭnytثAtαN|wˤWtΤB\n" -"ε{ҨϥΪytơAoN۷zӻytҮɡA\n" -"NϥθӻytwqҡBܡBJi@tξާ@ϥΡC\n" -"\n" -"zܦnFAIyTwzs~C" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "The %s is not supported by this version of Mandrake Linux." -msgstr "Mandrake Linux ثe٤䴩 %s" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "tape" -msgstr "ϱa" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "DHCP client" -msgstr "DHCP Τ" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "List users on display managers (kdm and gdm)" -msgstr "" - -#: ../../mouse.pm:1 -#, c-format -msgid "Logitech Mouse (serial, old C7 type)" -msgstr "Logitech Mouse (serial, old C7 type)" - -#: ../../partition_table.pm:1 -#, c-format -msgid "Restoring from file %s failed: %s" -msgstr "չϱqɮ %s _ɵoͿ~G %s" - -#: ../../fsedit.pm:1 -#, c-format -msgid "" -"I can't read the partition table of device %s, it's too corrupted for me :(\n" -"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" -"The other solution is to not allow DrakX to modify the partition table.\n" -"(the error is %s)\n" -"\n" -"Do you agree to lose all the partitions?\n" -msgstr "" - -#: ../../standalone/drakbug:1 -#, fuzzy, c-format -msgid "Find Package" -msgstr "%d ӮM" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Are you sure that you want to set up printing on this machine?\n" -msgstr "zn]woxWCLAȶضܡH\n" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "New devfs device" -msgstr "s devfs ˸m" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "ERROR: Cannot spawn %s." -msgstr "~ALk %sC" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Boot Style Configuration" -msgstr "}˦պA]w" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "Automatic time synchronization" -msgstr "۰ʳzL NTP AȮծ" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup files not found at %s." -msgstr "ƥɮק䤣 - %sC" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Armenian (phonetic)" -msgstr "Ȭ (phonetic)" - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "Card model:" -msgstr "dҲաG" - -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "Thin Client" -msgstr "DHCP Τ" - -#: ../../share/advertising/01-thanks.pl:1 -#, c-format -msgid "Thank you for choosing Mandrake Linux 9.2" -msgstr "P±z Mandrake Linux 9.2" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Start Server" -msgstr "ҰʪA" - -#: ../../lang.pm:1 -#, c-format -msgid "Turkmenistan" -msgstr "Turkmenistan" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "All remote machines" -msgstr "(oӾW)" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Install themes" -msgstr "w˧G" - -#: ../../help.pm:1 -#, c-format -msgid "Espanol" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Preparing installation" -msgstr "bdzƦwˤu@" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Edit selected host/network" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Add User -->" -msgstr "sWϥΪ -->" - -#: ../../lang.pm:1 -#, c-format -msgid "Nauru" -msgstr "Nauru" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "True Type fonts installation" -msgstr "True Type rɦw" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Auto-detect printers connected directly to the local network" -msgstr "۰ʰϰL" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "LAN configuration" -msgstr "ϰ]w" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "hard disk model" -msgstr "wЫ" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Maintain /etc/exports:\n" -" \tClusternfs allows export of the root filesystem to diskless " -"clients. drakTermServ\n" -" \tsets up the correct entry to allow anonymous access to the root " -"filesystem from\n" -" \tdiskless clients.\n" -"\n" -" \tA typical exports entry for clusternfs is:\n" -" \t\t\n" -" \t/\t\t\t\t\t(ro,all_squash)\n" -" \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" -"\t\t\t\n" -" \tWith SUBNET/MASK being defined for your network." -msgstr "" - -#: ../../fsedit.pm:1 -#, c-format -msgid "You can't use a LVM Logical Volume for mount point %s" -msgstr "zϥ LVM Logical Volume ӳ̬ %s I" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Get Windows Fonts" -msgstr "wWindowsr" - -#: ../../mouse.pm:1 -#, c-format -msgid "Mouse Systems" -msgstr "Mouse Systems" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Iranian" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Croatia" -msgstr "Croatia" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Gateway:" -msgstr "hDG" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Add server" -msgstr "sWϥΪ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remote printer name" -msgstr "ݦLW" - -#: ../../share/advertising/10-security.pl:1 -#, c-format -msgid "" -"MandrakeSoft has designed exclusive tools to create the most secured Linux " -"version ever: Draksec, a system security management tool, and a strong " -"firewall are teamed up together in order to highly reduce hacking risks." -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Device: " -msgstr "˸mG " - -#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 -#, c-format -msgid "Printerdrake" -msgstr "PrinterDrake" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "License agreement" -msgstr "vij" - -#: ../../standalone/draksec:1 -#, c-format -msgid "System Options" -msgstr "tοﶵ" - -#: ../../security/level.pm:1 -#, c-format -msgid "Please choose the desired security level" -msgstr "пܱzƱ檺w" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "This host is already in the list, it cannot be added again.\n" -msgstr "" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid ", USB printer" -msgstr "AUSB L \\/*%s" - -#: ../../standalone/drakfloppy:1 -#, fuzzy, c-format -msgid "" -"Unable to properly close mkbootdisk:\n" -"\n" -"<span foreground=\"Red\"><tt>%s</tt></span>" -msgstr "" -"Lk` mkbootdiskG\n" -" %s\n" -" %s" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Incremental backups only save files that have changed or are new since the " -"last backup." -msgstr "" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Choose the applications that will support the fonts:" -msgstr "ܯϥθӦr骺ε{G" - -#: ../../steps.pm:1 -#, c-format -msgid "Configure X" -msgstr "]w X " - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "hd" -msgstr "Chad" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Turkish (traditional \"F\" model)" -msgstr "gը (DzΦ \"F\" )" - -#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1 -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Congratulations!" -msgstr "!!" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Use owner id for execution" -msgstr "ɥt~ƸӾ֦v" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Allow remote root login" -msgstr "(oӾW)" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Down" -msgstr "VU" - -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Raw printer (No driver)" -msgstr "Raw L (LXʵ{)" - -#: ../../network/modem.pm:1 -#, fuzzy, c-format -msgid "Install rpm" -msgstr "w" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"To print a file from the command line (terminal window) you can either use " -"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or " -"\"kprinter <file>\". The graphical tools allow you to choose the printer and " -"to modify the option settings easily.\n" -msgstr "" -"nbݾROCҦCLɮתܡAziHoӫO: \n" -"\"%s <ɮצW>\"\n" -"Ϊ̬Oϥιϫ{:\n" -"\"xpp <ɮצW>\"\n" -"Ϊ̬O\n" -"\"kprinter <ɮצW>\"\n" -"YiCziHzLϫ{²檺ܦLءA\n" -"]tקCLﶵC\n" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Time remaining " -msgstr "Ѿlɶ" - -#: ../../keyboard.pm:1 -#, c-format -msgid "UK keyboard" -msgstr "^L" - -#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Unmount" -msgstr "" - -#: ../../mouse.pm:1 -#, c-format -msgid "Microsoft Explorer" -msgstr "Microsoft Explorer" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Uninstall Fonts" -msgstr "r" - -#: ../../keyboard.pm:1 -#, c-format -msgid "German (no dead keys)" -msgstr "w (no dead keys)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\tSend mail to %s\n" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Transferring %s..." -msgstr "bǰe %s ..." - -#: ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "32 thousand colors (15 bits)" -msgstr "3 U 2 d (15 줸)" - -#: ../../any.pm:1 -#, c-format -msgid "" -"You can export using NFS or Samba. Please select which you'd like to use." -msgstr "zɥX NFS Ϊ̬O Samba 귽CzΨ" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "Reboot" -msgstr "/ ΰ" - -#: ../../lang.pm:1 -#, c-format -msgid "Gambia" -msgstr "Gambia" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Mandrake Control Center" -msgstr "Mandrake " - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "Multi-function device" -msgstr "Ah\˸m" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "" -"You can enter miscellaneous ports. \n" -"Valid examples are: 139/tcp 139/udp.\n" -"Have a look at /etc/services for information." -msgstr "" -"ziHJ port TC\n" -"蹳OG139/tcp 139/udpC\n" -"DiHdݨt /etc/services ɮפeC" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\t-Tape \n" -msgstr "\t-ϱa\n" - -#: ../../standalone/drakhelp:1 -#, c-format -msgid "" -"No browser is installed on your system, Please install one if you want to " -"browse the help system" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Remember this password" -msgstr "OӱKX" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Internet Connection Sharing is now enabled." -msgstr "Internet suuQثe}ҤFC" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\t-Network by SSH.\n" -msgstr "\t (zL SSH)\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -" If the desired printer was auto-detected, simply choose it from the list " -"and then add user name, password, and/or workgroup if needed." -msgstr "" -"pGXӪLOzһݭnAAiHܸӶءAÿJsϥΪ̦W١B" -"KXAnɨÿJsզW١C" - -#: ../../network/netconnect.pm:1 -#, fuzzy, c-format -msgid " cable" -msgstr "Ϊ" - -#: ../../help.pm:1 ../../install_interactive.pm:1 -#, c-format -msgid "Use the free space on the Windows partition" -msgstr "ϥ Windows ΰϩҳѾliΪŶ" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "%s found on %s, configure it automatically?" -msgstr "F %s ˸m ( %s)A{bn]wܡH" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "XFree86 driver: %s\n" -msgstr "XFree86 Xʵ{G %s\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "This host/network is already in the list, it cannot be added again.\n" -msgstr "" - -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Choose the packages you want to install" -msgstr "ܱzQnw˪M" - -#: ../../lang.pm:1 -#, c-format -msgid "Papua New Guinea" -msgstr "Papua New Guinea" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "Multi-function device on a parallel port" -msgstr "AæCh\˸m \\/*%s" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Serbian (cyrillic)" -msgstr "뺸 (cyrillic)" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Enter the directory where backups are stored" -msgstr "пJƥƩҭn^sؿ" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "Make kernel message quiet by default" -msgstr "]w}ɤܮ֤߰TT" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Do you want to set this printer (\"%s\")\n" -"as the default printer?" -msgstr "znϥγoxL (\"%s\") w]LܡH" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "The DHCP end range" -msgstr "DHCP d" - -#: ../../any.pm:1 -#, c-format -msgid "Creating bootdisk..." -msgstr "bs@}Ϥ" - -#: ../../standalone/net_monitor:1 -#, fuzzy, c-format -msgid "Wait please, testing your connection..." -msgstr "bպsu" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Bringing down the network" -msgstr "su" - -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Login ID" -msgstr "nJbW" - -#: ../../services.pm:1 -#, c-format -msgid "" -"NFS is a popular protocol for file sharing across TCP/IP\n" -"networks. This service provides NFS file locking functionality." -msgstr "" -"NFS O@ӱ`ΪqTwAѸɨLDɮרtΡC\n" -"oӪAȴ NFS ɮפɮɪwC" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "DHCP Client" -msgstr "DHCP Τ" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "dismiss" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printing/Scanning on \"%s\"" -msgstr "" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "omit raid modules" -msgstr "ٲ raid Ҳ" - -#: ../../services.pm:1 -#, c-format -msgid "" -"lpd is the print daemon required for lpr to work properly. It is\n" -"basically a server that arbitrates print jobs to printer(s)." -msgstr "" -"lpd Aȵ{O lpr {B@Wiʪ{CYOn[]CLAȦA\n" -"ܡAlpd Oܱ`ܡC" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Irish" -msgstr "" - -# calendar/gui/dialogs/cal-prefs-dialog.glade.h:44 -# calendar/gui/event-editor.c:481 -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Sunday" -msgstr "P" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Internet Connection Configuration" -msgstr "Internet su]w" - -#: ../../modules/parameters.pm:1 -#, c-format -msgid "comma separated numbers" -msgstr "γrjƦr" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "" -"Once you've selected a device, you'll be able to see the device information " -"in fields displayed on the right frame (\"Information\")" -msgstr "" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Move selected rule up one level" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "" -"The following scanner\n" -"\n" -"%s\n" -"is available on your system.\n" -msgstr "" -"\n" -"ثe@xLw˦bzWC" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Do you really want to remove the printer \"%s\"?" -msgstr "zTwnR \"%s\" LܡH" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "I can't find any room for installing" -msgstr "䤣iΪw˪Ŷ" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Default printer" -msgstr "w]L" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "" -"You have configured multiple ways to connect to the Internet.\n" -"Choose the one you want to use.\n" -"\n" -msgstr "" -"zwgܳ]whӯsu Internet 覡C\n" -"бzܨ䤤@ӭnϥΪءC\n" -"\n" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Modify RAID" -msgstr "ܧϺа}C]w" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "" -"I have detected an ISDN PCI card, but I don't know its type. Please select a " -"PCI card on the next screen." -msgstr "" -" ISDN PCI dAOMOCЦbU@ӿùܳoidC" - -#: ../../any.pm:1 -#, c-format -msgid "Add user" -msgstr "sWϥΪ" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "RAID-disks %s\n" -msgstr "RAID Ϻ %s\n" - -#: ../../lang.pm:1 -#, c-format -msgid "Liberia" -msgstr "QQ" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "" -"Could not install the packages needed to set up a scanner with Scannerdrake." -msgstr "" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"Please enter the name of the interface connected to the internet.\n" -"\n" -"Examples:\n" -"\t\tppp+ for modem or DSL connections, \n" -"\t\teth0, or eth1 for cable connection, \n" -"\t\tippp+ for a isdn connection.\n" -msgstr "" - -#: ../../steps.pm:1 -#, c-format -msgid "Choose your keyboard" -msgstr "LΦ" - -#: ../../steps.pm:1 -#, c-format -msgid "Format partitions" -msgstr "wЮ榡" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Automatic correction of CUPS configuration" -msgstr "CPUS ۰ʤƳ]w" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Running \"%s\" ..." -msgstr " \"%s\" ..." - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "enable radio support" -msgstr "} radio 䴩" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Scanner sharing to hosts: " -msgstr "ɮפ" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Loopback file name: %s" -msgstr "Loopback ɮצW١G %s" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Please choose the printer to which the print jobs should go." -msgstr "пLҳssC" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Do not transfer printers" -msgstr "ǰeL" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "Delay before booting the default image" -msgstr "bҰʧ@~tΫe𪺮ɶ" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "" -"\n" -" Copyright (C) 2001-2002 by MandrakeSoft \n" -" DUPONT Sebastien (original version)\n" -" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n" -"\n" -" This program is free software; you can redistribute it and/or modify\n" -" it under the terms of the GNU General Public License as published by\n" -" the Free Software Foundation; either version 2, or (at your option)\n" -" any later version.\n" -"\n" -" This program is distributed in the hope that it will be useful,\n" -" but WITHOUT ANY WARRANTY; without even the implied warranty of\n" -" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" -" GNU General Public License for more details.\n" -"\n" -" You should have received a copy of the GNU General Public License\n" -" along with this program; if not, write to the Free Software\n" -" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" -"\n" -" Thanks:\n" -" - pfm2afm: \n" -"\t by Ken Borgendale:\n" -"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" -" - type1inst:\n" -"\t by James Macnicol: \n" -"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" -" - ttf2pt1: \n" -"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" -" Convert ttf font files to afm and pfb fonts\n" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use Hard Disk to backup" -msgstr "ϥεwжiƥ" - -#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1 -#: ../../standalone/drakboot:1 ../../standalone/drakgw:1 -#, c-format -msgid "Configure" -msgstr "]w" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Scannerdrake" -msgstr "zy" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "" -"Warning, another Internet connection has been detected, maybe using your " -"network" -msgstr "ĵiAztΤwg{suA]\bszA" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup Users" -msgstr "ƥϥΪ̸" - -#: ../../network/network.pm:1 -#, c-format -msgid "" -"Please enter your host name.\n" -"Your host name should be a fully-qualified host name,\n" -"such as ``mybox.mylab.myco.com''.\n" -"You may also enter the IP address of the gateway if you have one." -msgstr "" -"пJzDW١A\n" -"zDWӬO@ӦX檺DW (FQDN)A\n" -" ``mybox.mylab.myco.com'' 榡Fpz\n" -"ϥιhDܡA]ЦboJhD IP }C" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Select Printer Spooler" -msgstr "ܦLCLt" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Create new theme" -msgstr "إ߷sG" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Mandrake Tools Explanation" -msgstr "Mandrake uѪR" - -#: ../../standalone/drakpxe:1 -#, fuzzy, c-format -msgid "No image found" -msgstr "䤣LI" - -#: ../../install_steps.pm:1 -#, c-format -msgid "" -"Some important packages didn't get installed properly.\n" -"Either your cdrom drive or your cdrom is defective.\n" -"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" -"\"\n" -msgstr "" -"@nMLkw˨tΡC\n" -"iOz cdrom w馳DAΪ̬O CD wˤlF\n" - -#: ../../share/advertising/06-development.pl:1 -#, c-format -msgid "Mandrake Linux 9.2: the ultimate development platform" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Detected model: %s" -msgstr "쪺G%s %s" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "\"%s\" is not a valid email!" -msgstr "" - -#: ../../standalone/drakedm:1 -#, c-format -msgid "" -"X11 Display Manager allows you to graphically log\n" -"into your system with the X Window System running and supports running\n" -"several different X sessions on your local machine at the same time." -msgstr "" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, run the daily security checks." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Azerbaijan" -msgstr "Azerbaijan" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Device name to use for backup" -msgstr "пJznΨӳƥϥΪ˸mW" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "No tape in %s!" -msgstr "%s JϱaI" - -#: ../../standalone/drakhelp:1 -#, c-format -msgid "" -" --doc <link> - link to another web page ( for WM welcome " -"frontend)\n" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Dvorak (US)" -msgstr "Dvorak (US)" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "" -"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" -msgstr "Ӹ˸mثewWFh֭ӹ bug ˸m (GPCIBUSB ...)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "How is the printer connected?" -msgstr "Lsu覡?" - -#: ../../security/level.pm:1 -#, c-format -msgid "Security level" -msgstr "w" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "final resolution" -msgstr " ѪR " - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1 -#, c-format -msgid "Services" -msgstr "Server {" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "4 MB" -msgstr "4 MB" - -#: ../../share/compssUsers:999 -msgid "Office Workstation" -msgstr "줽n饭x" - -#: ../../share/compssUsers:999 -msgid "" -"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " -"gnumeric), pdf viewers, etc" -msgstr "" -"줽nG ѳBzn (kwordBabiword), պ (kspreadBgnumeric), pdf \" -"Ū{" - -#: ../../share/compssUsers:999 -msgid "Game station" -msgstr "Cx" - -#: ../../share/compssUsers:999 -msgid "Amusement programs: arcade, boards, strategy, etc" -msgstr "T֪@ǵ{G ȵPBqBʧ@B " - -#: ../../share/compssUsers:999 -msgid "Multimedia station" -msgstr "hC饭x" - -#: ../../share/compssUsers:999 -msgid "Sound and video playing/editing programs" -msgstr "ĥHμvs{" - -#: ../../share/compssUsers:999 -msgid "Internet station" -msgstr "Internet x" - -#: ../../share/compssUsers:999 -msgid "" -"Set of tools to read and send mail and news (pine, mutt, tin..) and to " -"browse the Web" -msgstr "" -"]tŪHBgHHξ\Ūªu (pineBmuttBtin ..) P web su" - -#: ../../share/compssUsers:999 -msgid "Network Computer (client)" -msgstr "Τݺ" - -#: ../../share/compssUsers:999 -msgid "Clients for different protocols including ssh" -msgstr "]t ssh LPqTwΤݵ{" - -#: ../../share/compssUsers:999 -msgid "Configuration" -msgstr "պA]w" - -#: ../../share/compssUsers:999 -msgid "Tools to ease the configuration of your computer" -msgstr "zK]wztΪu" - -#: ../../share/compssUsers:999 -msgid "Scientific Workstation" -msgstr "ǭp⥭x" - -#: ../../share/compssUsers:999 -msgid "Scientific applications such as gnuplot" -msgstr "" - -#: ../../share/compssUsers:999 -msgid "Console Tools" -msgstr "Console u" - -#: ../../share/compssUsers:999 -msgid "Editors, shells, file tools, terminals" -msgstr "s边, shell, ɮפu, ݾ" - -#: ../../share/compssUsers:999 -msgid "KDE Workstation" -msgstr "KDE " - -#: ../../share/compssUsers:999 -msgid "" -"The K Desktop Environment, the basic graphical environment with a collection " -"of accompanying tools" -msgstr "KDE ϧήୱҡA]t\hnΪϫu{" - -#: ../../share/compssUsers:999 -msgid "Gnome Workstation" -msgstr "Gnome " - -#: ../../share/compssUsers:999 -msgid "" -"A graphical environment with user-friendly set of applications and desktop " -"tools" -msgstr "]t͵ε{Bୱn骺ϫƨϥ" - -#: ../../share/compssUsers:999 -msgid "Other Graphical Desktops" -msgstr "Lϫୱn" - -#: ../../share/compssUsers:999 -msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" -msgstr "Icewm, Window Maker, Enlightenment, Fvwm, z{" - -#: ../../share/compssUsers:999 -msgid "C and C++ development libraries, programs and include files" -msgstr "C/C++ oiҡA]tsĶB{wPΤ@ǤޤJɮ" - -#: ../../share/compssUsers:999 -msgid "Documentation" -msgstr "ɮ" - -#: ../../share/compssUsers:999 -msgid "Books and Howto's on Linux and Free Software" -msgstr "Linux tλP@ǧKOn骺yBHOWTO " - -#: ../../share/compssUsers:999 -msgid "LSB" -msgstr "LSB" - -#: ../../share/compssUsers:999 -msgid "Linux Standard Base. Third party applications support" -msgstr "LSB 䴩A]tĤTOtӳn䴩" - -#: ../../share/compssUsers:999 -msgid "Web/FTP" -msgstr "Web/FTP" - -#: ../../share/compssUsers:999 -msgid "Apache, Pro-ftpd" -msgstr "ApacheBProFTPD" - -#: ../../share/compssUsers:999 -#, fuzzy -msgid "Mail" -msgstr "Mali" - -#: ../../share/compssUsers:999 -#, fuzzy -msgid "Postfix mail server" -msgstr "Postfix lA" - -#: ../../share/compssUsers:999 -msgid "Database" -msgstr "Ʈwn" - -#: ../../share/compssUsers:999 -msgid "PostgreSQL or MySQL database server" -msgstr "PostgreSQLBMySQL Ʈw" - -#: ../../share/compssUsers:999 -msgid "Firewall/Router" -msgstr "/Ѿ" - -#: ../../share/compssUsers:999 -msgid "Internet gateway" -msgstr "Internet hD" - -#: ../../share/compssUsers:999 -msgid "DNS/NIS " -msgstr "DNS/NIS A" - -#: ../../share/compssUsers:999 -msgid "Domain Name and Network Information Server" -msgstr "DNS P NIS A" - -#: ../../share/compssUsers:999 -msgid "Network Computer server" -msgstr "A" - -#: ../../share/compssUsers:999 -msgid "NFS server, SMB server, Proxy server, ssh server" -msgstr "NFS serverBSMB serverBProxy serverBSsh server" - -#: ../../share/compssUsers:999 -#, fuzzy -msgid "Set of tools to read and send mail and news and to browse the Web" -msgstr "" -"]tŪHBgHHξ\Ūªu (pineBmuttBtin ..) P web su" - -#~ msgid "\t-CDROM.\n" -#~ msgstr "\t-о\n" - -#~ msgid "" -#~ "\n" -#~ "\n" -#~ "\n" -#~ "We are now going to configure the %s connection.\n" -#~ "\n" -#~ "\n" -#~ "Press OK to continue." -#~ msgstr "" -#~ "\n" -#~ "\n" -#~ "dzƳ]w %s suC\n" -#~ "\n" -#~ "\n" -#~ "Tw~C" - -#~ msgid "" -#~ "\n" -#~ "\n" -#~ "To submit a bug report, click on the button report.\n" -#~ "This will open a web browser window on https://drakbug.mandrakesoft." -#~ "com\n" -#~ " where you'll find a form to fill in.The information displayed above will " -#~ "be \n" -#~ "transferred to that server\n" -#~ "\n" -#~ msgstr "" -#~ "\n" -#~ "\n" -#~ "n^ΰDAI^sC\n" -#~ "tαN|}sósu https://drakbug.mandrakesoft.com\n" -#~ " MЧAبÿJDTAHKNΰDeܥDqoi" -#~ "HC\n" -#~ "\n" - -#~ msgid "" -#~ "\n" -#~ " DrakBackup Daemon Report\n" -#~ "\n" -#~ "\n" -#~ msgstr "" -#~ "\n" -#~ " DrakBackup Ƶ{ƥM\n" -#~ "\n" -#~ "\n" - -#~ msgid "" -#~ "\n" -#~ " DrakBackup Report \n" -#~ "\n" -#~ msgstr "" -#~ "\n" -#~ " DrakBackup M \n" -#~ "\n" - -#~ msgid "" -#~ "\n" -#~ " Some errors during sendmail are caused by \n" -#~ " a bad configuration of postfix. To solve it you have to\n" -#~ " set myhostname or mydomain in /etc/postfix/main.cf\n" -#~ "\n" -#~ msgstr "" -#~ "\n" -#~ "ѩT]wάO{~AɭPHLk`oe\n" -#~ "XhC˵z postfix Ϊ̬O sendmail ]wպAC\n" - -#~ msgid "" -#~ "\n" -#~ "- Daemon (%s) include:\n" -#~ msgstr "" -#~ "\n" -#~ "- Daemon (%s) Aȵ{]t :\n" - -#~ msgid "" -#~ "\n" -#~ "Restore Backup Problems:\n" -#~ "\n" -#~ "During the restore step, Drakbackup will verify all your\n" -#~ "backup files before restoring them.\n" -#~ "Before the restore, Drakbackup will remove \n" -#~ "your original directory, and you will loose all your \n" -#~ "data. It is important to be careful and not modify the \n" -#~ "backup data files by hand.\n" -#~ msgstr "" -#~ "\n" -#~ "^sƥoͿ~:\n" -#~ "\n" -#~ "b^sƹL{ADrakBackup {|˵ƥɮO_\n" -#~ "aAHKT{^sɮץTL~C\n" -#~ "b^seADrakBackup {|n^s|\n" -#~ "ҦɮץؿCЪ`No@IA]níקƥɡC\n" - -#~ msgid "" -#~ "\n" -#~ "You can connect to the Internet or reconfigure your connection." -#~ msgstr "" -#~ "\n" -#~ "ziHsu Internet Ϊ̬Os]wzsuC" - -#~ msgid "" -#~ "\n" -#~ "You can disconnect or reconfigure your connection." -#~ msgstr "" -#~ "\n" -#~ "ziH_suΪ̬Os]wzsuC" - -#~ msgid "" -#~ "\n" -#~ "You can reconfigure your connection." -#~ msgstr "" -#~ "\n" -#~ "ziHs]wzsuC" - -#~ msgid "" -#~ " Transfer \n" -#~ "Now" -#~ msgstr "" -#~ " ǰe \n" -#~ "{b" - -#~ msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" -#~ msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" - -#~ msgid "Author:" -#~ msgstr "@̡G" - -#~ msgid "Backup %s to %s.old" -#~ msgstr "N %s ɮ׳ƥ %s.old" - -#~ msgid "Backup system" -#~ msgstr "ƥtθ" - -#~ msgid "CDROM / DVDROM" -#~ msgstr "CDROM / DVDROM" - -#~ msgid "China (Hong Kong)" -#~ msgstr "()" - -#~ msgid "" -#~ "Choose the hard drive you want to erase in order to install your new\n" -#~ "Mandrake Linux partition. Be careful, all data present on it will be " -#~ "lost\n" -#~ "and will not be recoverable!" -#~ msgstr "" -#~ "ܱzƱΨӦw Mandrake Linux tΪwСCAܦnAwФW" -#~ "ƱN|QMӵLkϡAФp߾ާ@oӶءC" - -#~ msgid "Choose your country/region" -#~ msgstr "ܱzaΦa" - -#~ msgid "Click here to launch the wizard ->" -#~ msgstr "Io̱Ұʳ]wF ->" - -#~ msgid "Configure the connection" -#~ msgstr "su]w" - -#~ msgid "" -#~ "Congratulations, the network and Internet configuration is finished.\n" -#~ "The configuration will now be applied to your system.\n" -#~ "\n" -#~ msgstr "" -#~ " ! ]wպAwg]wFC\n" -#~ "ztΤwgϥθӳ]wC\n" -#~ "\n" - -#~ msgid "Connect" -#~ msgstr "su" - -#~ msgid "Copy %s to %s" -#~ msgstr "bƻs %s %s" - -#~ msgid "Country" -#~ msgstr "a" - -#~ msgid "" -#~ "Create/Transfer\n" -#~ "backup keys for SSH" -#~ msgstr "" -#~ "إ/ǰe\n" -#~ "ƥ SSH ɮ" - -#~ msgid "Disconnect" -#~ msgstr "_su" - -#~ msgid "Expert Area" -#~ msgstr "Maϰ" - -#~ msgid "" -#~ "Failed to check filesystem %s. Do you want to repair the errors? (beware, " -#~ "you can loose data)" -#~ msgstr "" -#~ "Lkˬd %s ɮרtΡAzn״_ӿ~ܡH(Ъ`NA״_iɭP)" - -#~ msgid "" -#~ "Finally, you will be asked whether you want to see the graphical " -#~ "interface\n" -#~ "at boot. Note this question will be asked even if you chose not to test " -#~ "the\n" -#~ "configuration. Obviously, you want to answer \"No\" if your machine is " -#~ "to\n" -#~ "act as a server, or if you were not successful in getting the display\n" -#~ "configured." -#~ msgstr "" -#~ "̫᪺ɭԡAAӷ|ݨ߰ݱzO_nb}\n" -#~ "iJϧεnJC@ڭ̫ijAYOzq\n" -#~ "OΨӷ@AϥΪܡAoӶإiHܡy_zA\n" -#~ "]@ Server Aä] X ҰGUIϧ\n" -#~ "n{C" - -#~ msgid "Fonts conversion" -#~ msgstr "rഫ" - -#~ msgid "Harddrake2 version " -#~ msgstr "Harddrake2 " - -#~ msgid "Importance: %s\n" -#~ msgstr "nʡG %s\n" - -#~ msgid "Internet connection & configuration" -#~ msgstr "Intenet suP]w" - -#~ msgid "LiLo and Bootsplash themes installation successfull" -#~ msgstr "lilo P}ieGɮפwgw˦\" - -#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'." -#~ msgstr " 'kinird -f /boot/initrd-%s.img %s'C" - -#~ msgid "" -#~ "More than one Microsoft partition has been detected on your hard drive.\n" -#~ "Please choose the one you want to resize in order to install your new\n" -#~ "Mandrake Linux operating system.\n" -#~ "\n" -#~ "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" -#~ "\"Capacity\".\n" -#~ "\n" -#~ "\"Linux name\" is structured: \"hard drive type\", \"hard drive number" -#~ "\",\n" -#~ "\"partition number\" (for example, \"hda1\").\n" -#~ "\n" -#~ "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" -#~ "\"sd\" if it is a SCSI hard drive.\n" -#~ "\n" -#~ "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With " -#~ "IDE\n" -#~ "hard drives:\n" -#~ "\n" -#~ " * \"a\" means \"master hard drive on the primary IDE controller\";\n" -#~ "\n" -#~ " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" -#~ "\n" -#~ " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" -#~ "\n" -#~ " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" -#~ "\n" -#~ "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" -#~ "\"second lowest SCSI ID\", etc.\n" -#~ "\n" -#~ "\"Windows name\" is the letter of your hard drive under Windows (the " -#~ "first\n" -#~ "disk or partition is called \"C:\")." -#~ msgstr "" -#~ "ثezwФWh Windows ΰϡAпܱzƱnYpWindows" -#~ "ϡAHKŶXӦwˡuMandrake Linuxv@~tΡC\n" -#~ "\n" -#~ "CӤΰϳCXFO:yLinux W١z,yWindows W١z,yeqzC\n" -#~ "\n" -#~ "yLinux W١zOcʪ:ywЫAz,ywнsz,yΰϽsz(蹳" -#~ "O: hda )C\n" -#~ "\n" -#~ "ywЫAzNOAYzϥΪO IDE wСA|ܡuhdv, YOSCSIwЪܡA" -#~ "NOܡusdvC\n" -#~ "\n" -#~ "ywнszNObuhdvΪ̬Ousdv᭱rCH IDE wи˸mӻNq" -#~ ":\n" -#~ "\n" -#~ " uavoOuprimary IDE controller WĤ@x (master) wСvA\n" -#~ "\n" -#~ " ubvoOuprimmary IDE controller WĤGx (slave) wСvA\n" -#~ "\n" -#~ " ucvoOusecondary IDE controller WĤ@x (master) wСvA\n" -#~ "\n" -#~ " udvoOusecondary IDE controller WĤGx (slave) wСvC\n" -#~ "\n" -#~ "H SCSI wШӻAuavNOuSCSI IDE s̤p@xv, ubvNO" -#~ "uSCSI IDEvsG@xwСvAM̦Uh.....\n" -#~ "\n" -#~ "uWindows W١vNOb Windows UϺоNW١A蹳OuC:\\vC" - -#~ msgid "Name: %s\n" -#~ msgstr "W١G %s\n" - -#~ msgid "New configuration (isdn-light)" -#~ msgstr "sպA]w (isdn-light)" - -#~ msgid "No CDR/DVDR in drive!" -#~ msgstr "J CDR/DVDRI" - -#~ msgid "Old configuration (isdn4net)" -#~ msgstr "ªպA]w (isdn4net)" - -#~ msgid "" -#~ "Other (not drakbackup)\n" -#~ "keys in place already" -#~ msgstr "" -#~ "L (D drakbackup)\n" -#~ "{Ҿɮפwgsb" - -#~ msgid "Output" -#~ msgstr "X" - -#~ msgid "" -#~ "Please be sure that the cron daemon is included in your services. \n" -#~ "\n" -#~ "Note that currently all 'net' medias also use the hard drive." -#~ msgstr "" -#~ "нTwztΦw˨åBҥ cron Ƶ{Aȵ{C\n" -#~ "\n" -#~ "Ъ`NثeҦ '' C|ϥεwСC" - -#~ msgid "Please check for multisession CD" -#~ msgstr "pGzϥΪOhϬq CD AпӶ" - -#~ msgid "Please check if you are using CDRW media" -#~ msgstr "pGzϥΪO CDRW ˸mAпӶ" - -#~ msgid "Please check if you are using a DVDR device" -#~ msgstr "pGzϥΪO DVDR ˸mAпӶ" - -#~ msgid "Please check if you are using a DVDRAM device" -#~ msgstr "pGzϥΪO DVDRAM ˸mAпӶ" - -#~ msgid "Please check if you want to eject your tape after the backup." -#~ msgstr "pGzƱƥ۰ʰhAпӶءC" - -#~ msgid "Please check if you want to erase your RW media (1st Session)" -#~ msgstr "pGznMŪgC˸mW (1st Session)AпӶ" - -#~ msgid "Please check if you want to erase your tape before the backup." -#~ msgstr "pGznMϱa즳ơAпӶءC" - -#~ msgid "Please check if you want to use the non-rewinding device." -#~ msgstr "pGznϥ non-rewinding ˸mAпӶءC" - -#~ msgid "" -#~ "Please choose the\n" -#~ "media for backup." -#~ msgstr "пܭnΨӳƥ˸m" - -#~ msgid "" -#~ "Please choose the time \n" -#~ "interval between each backup" -#~ msgstr "" -#~ "пJC@ƥ\n" -#~ "jɶ" - -#~ msgid "" -#~ "Please choose your CD/DVD device\n" -#~ "(Press Enter to propogate settings to other fields.\n" -#~ "This field isn't necessary, only a tool to fill in the form.)" -#~ msgstr "" -#~ "пܱznϥΪ CD/DVD ˸m\n" -#~ "(t~ziHt~JLB~ݭnѼA\n" -#~ "YOݭnwAiHݭnJƭȡC)" - -#~ msgid "Please choose your CD/DVD media size (Mb)" -#~ msgstr "пz CD/DVD eqjp" - -#~ msgid "Please enter the device name to use for backup" -#~ msgstr "пJznΨӳƥϥΪ˸mW" - -#~ msgid "" -#~ "Please enter the directory (or module) to\n" -#~ " put the backup on this host." -#~ msgstr "пJnƥӥDҦbؿW" - -#~ msgid "Please enter the directory to save to:" -#~ msgstr "пJznxsؿW١G" - -#~ msgid "Please enter the directory to save:" -#~ msgstr "пJznxsؿW١G" - -#~ msgid "Please enter the directory where backups are stored" -#~ msgstr "пJƥƩҭn^sؿ" - -#~ msgid "Please enter the host name or IP." -#~ msgstr "пJDW٩άO IP" - -#~ msgid "" -#~ "Please enter the maximum size\n" -#~ " allowed for Drakbackup" -#~ msgstr "пJƥ\̤jjp" - -#~ msgid "" -#~ "Please enter your CD Writer device name\n" -#~ " ex: 0,1,0" -#~ msgstr "" -#~ "пJzN˸mW\n" -#~ "蹳OG 0,1,0" - -#~ msgid "Please enter your login" -#~ msgstr "пJnJb" - -#~ msgid "Please enter your password" -#~ msgstr "пJnJKX" - -#~ msgid "Please relog into %s to activate the changes" -#~ msgstr "ЭsnJ %s nܧͮ" - -#~ msgid "Previous" -#~ msgstr "W@B" - -#~ msgid "Printing system: " -#~ msgstr "CLtΡG" - -#~ msgid "Region" -#~ msgstr "ϰ" - -#~ msgid "Relaunch 'lilo'" -#~ msgstr " 'lilo'" - -#~ msgid "Remote Printers" -#~ msgstr "ݦL" - -#~ msgid "Russian (Yawerty)" -#~ msgstr "Xù (Yawerty)" - -#~ msgid "Select the files or directories and click on 'Add'" -#~ msgstr "ɮשΪ̬OؿAMI '[J'" - -#~ msgid "Size: %d KB\n" -#~ msgstr "jpG %d KB\n" - -#~ msgid "Thank you for choosing Mandrake Linux 9.1" -#~ msgstr "P±z Mandrake Linux 9.1" - -#~ msgid "" -#~ "This is HardDrake, a Mandrake hardware configuration tool.\n" -#~ "Version:" -#~ msgstr "" -#~ "oO HardDrake {AMandrake ҵoiw˵]wuC\n" -#~ "G" - -#~ msgid "Total progess" -#~ msgstr "i" - -#~ msgid "" -#~ "Unable to properly close mkbootdisk: \n" -#~ " %s \n" -#~ " %s" -#~ msgstr "" -#~ "Lk` mkbootdiskG\n" -#~ " %s\n" -#~ " %s" - -#~ msgid "Unkown driver" -#~ msgstr "Xʵ{" - -#~ msgid "Use CD/DVDROM to backup" -#~ msgstr "ϥ CD/DVDROM ƥ" - -#~ msgid "Use Incremental Backups (do not replace old backups)" -#~ msgstr "ϥλWƥ (|л\¦ƥ)" - -#~ msgid "Use incremental backup (do not replace old backups)" -#~ msgstr "ϥλWƥ (nл\¦ƥ)" - -#~ msgid "Version: %s\n" -#~ msgstr "sG %s\n" - -#~ msgid "" -#~ "WARNING!\n" -#~ "\n" -#~ "DrakX will now resize your Windows partition. Be careful:\n" -#~ "this operation is dangerous. If you have not already done\n" -#~ "so, you should first exit the installation, run scandisk\n" -#~ "under Windows (and optionally run defrag), then restart the\n" -#~ "installation. You should also backup your data.\n" -#~ "When sure, press Ok." -#~ msgstr "" -#~ "ĵi!\n" -#~ "\n" -#~ "DrakX {bnwz Windows ΰϪjpAФp!! \n" -#~ "oӰʧ@OܦMIAХ}w˵{Ab Windows \n" -#~ "U scandisk defrag HAӦw LinuxAӥB\n" -#~ "̦nN Windows ΰϩUưnƥCTw\n" -#~ "SDHA~yTwzsC" - -#~ msgid "We are now going to configure the %s connection." -#~ msgstr "dzƳ]w %s suC" - -#~ msgid "" -#~ "Which ISDN configuration do you prefer?\n" -#~ "\n" -#~ "* The Old configuration uses isdn4net. It contains powerful\n" -#~ " tools, but is tricky to configure, and not standard.\n" -#~ "\n" -#~ "* The New configuration is easier to understand, more\n" -#~ " standard, but with less tools.\n" -#~ "\n" -#~ "We recommand the light configuration.\n" -#~ msgstr "" -#~ "znϥΨ@ ISDN պAH\n" -#~ "\n" -#~ "* ªպA]wOϥ isdn4netA]t\hܦnΪuAO\n" -#~ " Ooӵ{]wA]OܼзǡC\n" -#~ "\n" -#~ "* sպA]weFѡA]зǡAuLiΪu|֤@IC\n" -#~ "\n" -#~ "ijzϥ light պA]wΡC\n" - -#~ msgid "" -#~ "Which dhcp client do you want to use?\n" -#~ "Default is dhcp-client." -#~ msgstr "" -#~ "znϥέ@ dhcp ϥκݵ{?\n" -#~ "w]O dhcp-client" - -#~ msgid "Wizard..." -#~ msgstr "F..." - -#~ msgid "Write %s" -#~ msgstr "gJ %s" - -#~ msgid "" -#~ "XawTV isn't installed!\n" -#~ "\n" -#~ "\n" -#~ "If you do have a TV card but DrakX has neither detected it (no bttv nor " -#~ "saa7134\n" -#~ "module in \"/etc/modules\") nor installed xawtv, please send the\n" -#~ "results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n" -#~ "with subject \"undetected TV card\".\n" -#~ "\n" -#~ "\n" -#~ "You can install it by typing \"urpmi xawtv\" as root, in a console." -#~ msgstr "" -#~ "ztΨåw XawTV {MI\n" -#~ "\n" -#~ "\n" -#~ "pGztΦwˤWqdAO DrakX å쪺\n" -#~ "(@iH/etc/modules ɮפO_]t bttv άO\n" -#~ "saa7134 اPw)Aа\"lspcidrake -v -f\"\n" -#~ "MN浲GHD \"Undeleted TV card\" HH\n" -#~ "\"install\\@mandrakesoft.com\"\n" -#~ "C\n" -#~ "\n" -#~ "z{biH}Ҥ@Ӳݾ{AΪ̬ObrUA\n" -#~ " root v \"urpmi xawtv\" NӮMwˤWC" - -#~ msgid "You are currently connected to the Internet." -#~ msgstr "zثesu InternetC" - -#~ msgid "You are not currently connected to the Internet." -#~ msgstr "zثe|su InternetC" - -#~ msgid "across Network" -#~ msgstr "zL" - -#~ msgid "activate now" -#~ msgstr "ߧYҰ" - -#~ msgid "add a rule" -#~ msgstr "sWWh" - -#~ msgid "boot disk creation" -#~ msgstr "s@}Ϥ" - -#~ msgid "connecting to Bugzilla wizard ..." -#~ msgstr "suεoGF ..." - -#~ msgid "deactivate now" -#~ msgstr "ߧY" - -#~ msgid "delete" -#~ msgstr "R" - -#~ msgid "edit" -#~ msgstr "s" - -#~ msgid "files sending by FTP" -#~ msgstr "zL FTP eXɮפ" - -#~ msgid "group" -#~ msgstr "s" - -#~ msgid "group :" -#~ msgstr "sաG" - -#~ msgid "kernel version" -#~ msgstr "֤ߪ" - -#~ msgid "load setting" -#~ msgstr "J]w" - -#~ msgid "matching" -#~ msgstr "۰t" - -#~ msgid "on CDROM" -#~ msgstr " CDROM ˸m" - -#~ msgid "on Hard Drive" -#~ msgstr "w" - -#~ msgid "on Tape Device" -#~ msgstr "ϱa˸m" - -#~ msgid "path" -#~ msgstr "|" - -#~ msgid "permissions" -#~ msgstr "v" - -#~ msgid "pfm fonts conversion" -#~ msgstr "pfm rഫ" - -#~ msgid "select perm file to see/edit" -#~ msgstr "ndݽs誺ɮ" - -#~ msgid "sticky-bit" -#~ msgstr "Sticky-Bit" - -#~ msgid "ttf fonts conversion" -#~ msgstr "ttf rഫ" - -#~ msgid "user" -#~ msgstr "ϥΪ" - -#~ msgid "user :" -#~ msgstr "ϥΪ̡G" diff --git a/perl-install/share/rpmsrate b/perl-install/share/rpmsrate index a0c68a945..d037dc56d 100644 --- a/perl-install/share/rpmsrate +++ b/perl-install/share/rpmsrate @@ -17,11 +17,11 @@ GNOME 2 bug-buddy KDE - 5 kdebase-progs kdebase-nsplugins kdebase-kdm galaxy-kde galaxy-kde-kwin mandrake-galaxy krozat kdeartwork-kde-classic + 5 kdebase-progs kdebase-nsplugins mdkkdm galaxy-kde galaxy-kde-kwin mandrake-galaxy krozat kdeartwork-kde-classic 5 kde-i18n-af kde-i18n-ar kde-i18n-az kde-i18n-bg kde-i18n-bs kde-i18n-ca kde-i18n-cs kde-i18n-da kde-i18n-de kde-i18n-el kde-i18n-en_GB kde-i18n-eo kde-i18n-es kde-i18n-et kde-i18n-eu kde-i18n-fa kde-i18n-fi kde-i18n-fr kde-i18n-he kde-i18n-hr kde-i18n-hu kde-i18n-is kde-i18n-it kde-i18n-ja kde-i18n-ko kde-i18n-lt kde-i18n-lv kde-i18n-mk kde-i18n-nb kde-i18n-nl kde-i18n-nn kde-i18n-pl kde-i18n-pt kde-i18n-pt_BR kde-i18n-ro kde-i18n-ru kde-i18n-se kde-i18n-sk kde-i18n-sl kde-i18n-sr kde-i18n-sv kde-i18n-ta kde-i18n-th kde-i18n-tr kde-i18n-uk kde-i18n-vi kde-i18n-zh_CN.GB2312 kde-i18n-zh_TW.Big5 kde-i18n-zu 5 kdebase-servicemenu zip 5 kdeutils kdeutils-kcharselect - 3 mdkkdm + 3 kdebase-kdm VIDEO 5 RealPlayer @@ -41,6 +41,7 @@ OFFICE 5 gnucash gnucash-hbci gnucash-ofx 5 mrproject 4 acroread acroread-nppdf + 4 cxoffice 3 gnumeric 3 gaddr xpdf 3 wv ical diff --git a/perl-install/standalone/drakconnect b/perl-install/standalone/drakconnect index 1d34360dd..dc7811200 100755 --- a/perl-install/standalone/drakconnect +++ b/perl-install/standalone/drakconnect @@ -186,7 +186,7 @@ $window1->{window}->add( 0, $profile_combo, 0, $button_del, 0, gtksignal_connect(Gtk2::Button->new(N("New profile...")), clicked => sub { - my $dialog = _create_dialog("New profile...", { small => 1 }); + my $dialog = _create_dialog(N("New profile..."), { small => 1 }); my $entry_dialog = Gtk2::Entry->new; gtkpack($dialog->vbox, Gtk2::Label->new(N("Name of the profile to create (the new profile is created as a copy of the current one) :")), @@ -263,7 +263,7 @@ $window1->{window}->add( !$wizard_pid and do { exec("drakconnect") or POSIX::_exit(1) }; sensitive_buttons(0); } else { - err_dialog(N("Unable to fork: %s", "$!")); + err_dialog(N("Error"), N("Unable to fork: %s", "$!")); } }), ), diff --git a/perl-install/standalone/drakfont b/perl-install/standalone/drakfont index ca7fe9a9e..3dd3010c6 100755 --- a/perl-install/standalone/drakfont +++ b/perl-install/standalone/drakfont @@ -319,10 +319,15 @@ sub convert_fonts { sub convert_ttf_fonts { my ($fonts, $o_generate_pfb) = @_; - convert_fonts($fonts, $o_generate_pfb, "TTF", $ttf2pt1); + convert_fonts($fonts, $ttf2pt1, "TTF", $o_generate_pfb); } +sub move_fonts { + my ($src_dir, $dest_dir, @extensions) = @_; + my @fonts = map { s!.*/!!; $_ } map { glob("$src_dir/*.$_") } @extensions; + system("cd $src_dir && mv @fonts $dest_dir") if @fonts; +} sub put_font_dir() { -e "/usr/share/ghostscript" or do { $gs = 0; print "ghostscript is not installed on your system...\n" }; @@ -334,8 +339,11 @@ sub put_font_dir() { } interactive_progress($pbar1, 0.01, N("done")); interactive_progress($pbar2, 0.10, N("True Type fonts installation")); - glob("$drakfont_dir/tmp/tmp/*.TTF") - and system('cd ' . $drakfont_dir . '/tmp/tmp ; for foo in *.TTF; do mv $foo `basename $foo .TTF`.ttf; done'); + foreach my $font (glob("$drakfont_dir/tmp/tmp/*.TTF")) { + my $newfont = $font; + $newfont =~ s/\.TTF$/.ttf/; + rename($font, $newfont); + } system('cd ' . $drakfont_dir . '/tmp/tmp && cp *.ttf ../../ttf; chmod 644 ../../ttf/*ttf'); interactive_progress($pbar2, 0.20, N("please wait during ttmkfdir...")); @@ -346,16 +354,16 @@ sub put_font_dir() { if ($gs) { convert_ttf_fonts([ glob("$drakfont_dir/tmp/tmp/*.ttf") ], 1); - system(join('', "cd $drakfont_dir/tmp/tmp && mv *.gsf *.pfb *.pfm", if_($so, "*.afm"), " ../Type1")); + move_fonts("$drakfont_dir/tmp/tmp", "../Type1", qw(afm gsf pfb pfm)); system("cd $drakfont_dir/tmp/Type1 && $type1inst"); interactive_progress($pbar2, 0.1, N("type1inst building")); if ($so) { -e "$drakfont_dir/tmp/Type1/Fontmap" and system("cd $drakfont_dir/tmp/Type1 && cat Fontmap >> `rpm -ql ghostscript | grep Fontmap.GS` "); - system("cd $drakfont_dir/tmp/Type1 && mv *.pfm *.gsf *.afm *.pfb ../../Type1 "); + move_fonts("$drakfont_dir/tmp/Type1", "../../Type1", qw(afm gsf pfb pfm)); } else { system("cd $drakfont_dir/tmp/Type1 && cat Fontmap >> `rpm -ql ghostscript | grep Fontmap.GS` "); - system("cd $drakfont_dir/tmp/Type1 && mv *.pfm *.afm *.gsf *.pfb ../../Type1 "); + move_fonts("$drakfont_dir/tmp/Type1", "../../Type1", qw(afm gsf pfb pfm)); } my $type1dir = $drakfont_dir . "/Type1"; system("cd $type1dir && $fccache && $type1inst"); @@ -364,8 +372,8 @@ sub put_font_dir() { } elsif ($so) { convert_ttf_fonts([ glob("$drakfont_dir/tmp/tmp/*.ttf") ]); convert_fonts([ glob("$drakfont_dir/tmp/tmp/*.pfm") ], $pfm2afm, "PFM"); - system("cd $drakfont_dir/tmp/tmp && mv *.afm ../Type1"); - system("cd $drakfont_dir/tmp/Type1 && mv *.afm ../../Type1 "); + move_fonts("$drakfont_dir/tmp/tmp", "../Type1", qw(afm)); + move_fonts("$drakfont_dir/tmp/Type1", "../../Type1", qw(afm)); my $type1dir = $drakfont_dir . "/Type1"; system("cd $type1dir && $fccache && $type1inst"); interactive_progress($pbar2, 0.14, N("type1inst building")); diff --git a/perl-install/standalone/drakperm b/perl-install/standalone/drakperm index 7a19992d3..559462c99 100755 --- a/perl-install/standalone/drakperm +++ b/perl-install/standalone/drakperm @@ -283,6 +283,7 @@ sub row_setting_dialog { $suid->set_active($s_right{read}); $file->set_text($model->get($iter, 1)) if $iter; + $ok->set_sensitive(!$model->get($iter, 0)) if $iter; my $users = Gtk2::OptionMenu->new; $users->set_popdown_strings(&get_user_or_group('users')); @@ -382,7 +383,7 @@ sub row_setting_dialog { ); $vbox; - } keys %rights), + } qw(user group other)), gtkpack(Gtk2::VBox->new(0,5), Gtk2::Label->new(' '), $suid, diff --git a/perl-install/standalone/net_monitor b/perl-install/standalone/net_monitor index 68ca5a9a2..40310fa1a 100755 --- a/perl-install/standalone/net_monitor +++ b/perl-install/standalone/net_monitor @@ -132,7 +132,8 @@ gtkadd($window1->{window}, $window1->{rwindow}->show_all; $window1->{rwindow}->realize; $combo1->entry->signal_connect(changed => sub { - network::netconnect::set_profile($netcnx, $combo1->entry->get_text); + $netcnx->{PROFILE} = $combo1->entry->get_text; + network::netconnect::set_profile($netcnx); network::netconnect::load_conf($netcnx, $netc, $intf); network::netconnect::read_net_conf('', $netcnx, $netc); }); @@ -561,5 +562,6 @@ sub draw_monitor { sub test_connected { - $::testing || network::tools::test_connected; + my ($arg) = @_; + $::testing || network::tools::test_connected($arg); } diff --git a/perl-install/standalone/service_harddrake b/perl-install/standalone/service_harddrake index f59c3c668..f8028b762 100755 --- a/perl-install/standalone/service_harddrake +++ b/perl-install/standalone/service_harddrake @@ -66,6 +66,11 @@ foreach (@harddrake::data::tree) { } else { @configurator_pool = $configurator; } + # automatic sound slots configuration + if ($Ident eq "AUDIO") { + harddrake::sound::configure_sound_slots(); + } + next unless -x first(split /\s+/, $configurator_pool[0]); foreach my $configurator (@configurator_pool) { my ($pid, $no); @@ -94,7 +99,5 @@ foreach (@harddrake::data::tree) { log::explanations("created file $last_boot_config"); Storable::store(\%config, $last_boot_config); -# automatic sound slots configuration -harddrake::sound::configure_sound_slots(); $in->exit(0) if $in; diff --git a/perl-install/timezone.pm b/perl-install/timezone.pm index f09bbdf1b..d6dc774ce 100644 --- a/perl-install/timezone.pm +++ b/perl-install/timezone.pm @@ -11,7 +11,7 @@ sub getTimeZones { my ($prefix) = @_; $::testing and $prefix = ''; open(my $F, "cd $prefix/usr/share/zoneinfo && find [A-Z]* -type f |"); - my @l = chomp_(<$F>); + my @l = difference2([ chomp_(<$F>) ], [ 'ROC', 'PRC'] ); close $F or die "cannot list the available zoneinfos"; sort @l; } diff --git a/rescue/list.x86_64 b/rescue/list.x86_64 index 9cef38a4f..21970eff9 100644 --- a/rescue/list.x86_64 +++ b/rescue/list.x86_64 @@ -2,9 +2,12 @@ /sbin/resize2fs /sbin/resize_reiserfs /sbin/rescuept +/usr/sbin/grub +/usr/sbin/grub-install /sbin/mkreiserfs /sbin/reiserfsck /sbin/fsck.xfs /sbin/xfs_repair /sbin/sfdisk +/boot/grub/stage[12] /usr/lib/perl5/PERL_VERSION/x86_64-linux-thread-multi/CORE/libperl.so diff --git a/tools/ddcprobe/Makefile b/tools/ddcprobe/Makefile index bcbf1464d..83f3e3df5 100644 --- a/tools/ddcprobe/Makefile +++ b/tools/ddcprobe/Makefile @@ -6,24 +6,17 @@ ARCH := $(patsubst i%86,i386,$(shell uname -m)) ARCH := $(patsubst sparc%,sparc,$(ARCH)) ifeq (i386,$(ARCH)) - -ddcxinfos: lrmi.o vesamode.o vbe.o ddcxinfos.o - -libvbe.a: lrmi.o vesamode.o vbe.o - $(AR) cru $@ $^ - -#install: $(DESTDIR)/usr/include/vbe.h $(DESTDIR)/usr/lib/libvbe.a - -$(DESTDIR)/usr/include/vbe.h: - install -m 644 vbe.h $(DESTDIR)/usr/include/vbe.h - -$(DESTDIR)/usr/lib/libvbe.a: - install -m 644 libvbe.a $(DESTDIR)/usr/lib/libvbe.a - -else -ddcxinfos: not_handled.c - gcc -o $@ $< +OBJS = ddcxinfos.o vesamode.o vbe.o lrmi.o +endif +ifeq (x86_64,$(ARCH)) +OBJS = ddcxinfos.o vesamode.o vbe.o endif +ifeq (,$(OBJS)) +OBJS = not_handled.o +endif + +ddcxinfos: $(OBJS) + $(CC) -o $@ $(OBJS) $(CFLAGS) $(LDFLAGS) clean: $(RM) $(TARGETS) *.o core diff --git a/tools/ddcprobe/ddcxinfos.c b/tools/ddcprobe/ddcxinfos.c index 22ed653b8..c13d803c4 100644 --- a/tools/ddcprobe/ddcxinfos.c +++ b/tools/ddcprobe/ddcxinfos.c @@ -2,28 +2,55 @@ #include <stdlib.h> #include <string.h> #include <math.h> +#include <sys/mman.h> +#include <unistd.h> +#include <fcntl.h> +#include <errno.h> #include "vbe.h" #include "vesamode.h" #ident "$Id$" #define SQR(x) ((x) * (x)) -int main(int argc, char **argv) +int main(void) { int i, j; - u_int16_t *mode_list; + u_int16_t *mode_list, *mode_list_end; unsigned char hmin, hmax, vmin, vmax; struct vbe_info *vbe_info; struct vbe_edid1_info *edid; struct vbe_modeline *modelines; - +#if KERNEL_BOOT_INFO + u_int32_t page_size; + int dev_mem_fd; + char *mem; +#endif if ((vbe_info = vbe_get_vbe_info()) == NULL) return 1; - printf("%dKB of video ram\n", vbe_info->memory_size * 64); +#if KERNEL_BOOT_INFO + /* Open /dev/mem for extra information from VGA BIOS. */ + if ((dev_mem_fd = open("/dev/mem", O_RDONLY)) < 0) { + perror("open /dev/mem"); + return 1; + } + page_size = getpagesize(); + mem = malloc(page_size); + if (lseek(dev_mem_fd, vbe_info->mode_list.base, SEEK_SET) != vbe_info->mode_list.base) + return 1; + if (read(dev_mem_fd, mem, page_size) != page_size) + return 1; + mode_list = (u_int16_t *)mem; + mode_list_end = (u_int16_t *)(mem + page_size); +#endif +#if defined(__i386__) + mode_list = (u_int16_t *)vbe_info->mode_list.ptr; + mode_list_end = (u_int16_t *)-2; /* this will always succeed */ +#endif + /* List supported standard modes. */ - for (mode_list = vbe_info->mode_list.list; *mode_list != 0xffff; mode_list++) + while (mode_list < mode_list_end && *mode_list != 0xffff) { for (i = 0; known_vesa_modes[i].x; i++) if (known_vesa_modes[i].number == *mode_list) printf("%d %d %d\n", @@ -31,8 +58,15 @@ int main(int argc, char **argv) known_vesa_modes[i].x, known_vesa_modes[i].y ); + mode_list++; + } printf("\n"); +#if KERNEL_BOOT_INFO + free(mem); + close(dev_mem_fd); +#endif + if ((edid = vbe_get_edid_info()) == NULL) return 0; if (edid->version == 255 && edid->revision == 255) return 0; diff --git a/tools/ddcprobe/vbe.c b/tools/ddcprobe/vbe.c index a67e56d0b..7a5633c7e 100644 --- a/tools/ddcprobe/vbe.c +++ b/tools/ddcprobe/vbe.c @@ -8,69 +8,23 @@ #include <assert.h> #include <limits.h> #include <ctype.h> +#include <fcntl.h> +#include <unistd.h> +#if defined(__i386__) #include "lrmi.h" +#endif #include "vesamode.h" #include "vbe.h" -#ident "$Id$" -/* Return information about a particular video mode. */ -struct vbe_mode_info *vbe_get_mode_info(u_int16_t mode) +/* Get VBE info. */ +static void normalize_addr(vbe_addr_t *paddr) { - struct LRMI_regs regs; - char *mem; - struct vbe_mode_info *ret = NULL; - - /* Initialize LRMI. */ - if(LRMI_init() == 0) { - return NULL; - } - - /* Allocate a chunk of memory. */ - mem = LRMI_alloc_real(sizeof(struct vbe_mode_info)); - if(mem == NULL) { - return NULL; - } - memset(mem, 0, sizeof(struct vbe_mode_info)); - - memset(®s, 0, sizeof(regs)); - regs.eax = 0x4f01; - regs.ecx = mode; - regs.es = ((u_int32_t)mem) >> 4; - regs.edi = ((u_int32_t)mem) & 0x0f; - - /* Do it. */ - iopl(3); - ioperm(0, 0x400, 1); - - if(LRMI_int(0x10, ®s) == 0) { - LRMI_free_real(mem); - return NULL; - } - - /* Check for successful return. */ - if((regs.eax & 0xffff) != 0x004f) { - LRMI_free_real(mem); - return NULL; - } - - /* Get memory for return. */ - ret = malloc(sizeof(struct vbe_mode_info)); - if(ret == NULL) { - LRMI_free_real(mem); - return NULL; - } - - /* Copy the buffer for return. */ - memcpy(ret, mem, sizeof(struct vbe_mode_info)); - - /* Clean up and return. */ - LRMI_free_real(mem); - return ret; + paddr->base = (paddr->addr.seg << 4) + paddr->addr.ofs; } -/* Get VBE info. */ struct vbe_info *vbe_get_vbe_info() { +#if defined(__i386__) struct LRMI_regs regs; unsigned char *mem; struct vbe_info *ret = NULL; @@ -119,101 +73,93 @@ struct vbe_info *vbe_get_vbe_info() memcpy(ret, mem, sizeof(struct vbe_info)); /* Set up pointers to usable memory. */ - ret->mode_list.list = (u_int16_t*) ((ret->mode_list.addr.seg << 4) + - (ret->mode_list.addr.ofs)); - ret->oem_name.string = (char*) ((ret->oem_name.addr.seg << 4) + - (ret->oem_name.addr.ofs)); + ret->mode_list.ptr = (u_int16_t*) ((ret->mode_list.addr.seg << 4) + + (ret->mode_list.addr.ofs)); + ret->oem_name.ptr = (char*) ((ret->oem_name.addr.seg << 4) + + (ret->oem_name.addr.ofs)); /* Snip, snip. */ - mem = strdup(ret->oem_name.string); /* leak */ + mem = strdup(ret->oem_name.ptr); /* leak */ while(((i = strlen(mem)) > 0) && isspace(mem[i - 1])) { mem[i - 1] = '\0'; } - ret->oem_name.string = mem; + ret->oem_name.ptr = mem; /* Set up pointers for VESA 3.0+ strings. */ if(ret->version[1] >= 3) { /* Vendor name. */ - ret->vendor_name.string = (char*) + ret->vendor_name.ptr = (char*) ((ret->vendor_name.addr.seg << 4) + (ret->vendor_name.addr.ofs)); - mem = strdup(ret->vendor_name.string); /* leak */ + mem = strdup(ret->vendor_name.ptr); /* leak */ while(((i = strlen(mem)) > 0) && isspace(mem[i - 1])) { mem[i - 1] = '\0'; } - ret->vendor_name.string = mem; + ret->vendor_name.ptr = mem; /* Product name. */ - ret->product_name.string = (char*) + ret->product_name.ptr = (char*) ((ret->product_name.addr.seg << 4) + (ret->product_name.addr.ofs)); - mem = strdup(ret->product_name.string); /* leak */ + mem = strdup(ret->product_name.ptr); /* leak */ while(((i = strlen(mem)) > 0) && isspace(mem[i - 1])) { mem[i - 1] = '\0'; } - ret->product_name.string = mem; + ret->product_name.ptr = mem; /* Product revision. */ - ret->product_revision.string = (char*) + ret->product_revision.ptr = (char*) ((ret->product_revision.addr.seg << 4) + (ret->product_revision.addr.ofs)); - mem = strdup(ret->product_revision.string); /* leak */ + mem = strdup(ret->product_revision.ptr); /* leak */ while(((i = strlen(mem)) > 0) && isspace(mem[i - 1])) { mem[i - 1] = '\0'; } - ret->product_revision.string = mem; + ret->product_revision.ptr = mem; } /* Cleanup. */ LRMI_free_real(mem); return ret; -} - -/* Check if EDID queries are suorted. */ -int vbe_get_edid_supported() -{ - struct LRMI_regs regs; - int ret = 0; +#endif +#if KERNEL_BOOT_INFO + int vbe_fd; - /* Initialize LRMI. */ - if(LRMI_init() == 0) { - return 0; - } + struct vbe_info *ret = NULL; + ret = malloc(sizeof(struct vbe_info)); + if (ret == NULL) + return NULL; - memset(®s, 0, sizeof(regs)); - regs.eax = 0x4f15; - regs.ebx = 0x0000; - regs.es = 0x3000; - regs.edi = 0x3000; + if ((vbe_fd = open(BOOT_VBE_INFO, O_RDONLY)) < 0) + return NULL; - /* Do it. */ - iopl(3); - ioperm(0, 0x400, 1); + if (read(vbe_fd, ret, VBE_BLOCK_SIZE) != VBE_BLOCK_SIZE) + return NULL; - if(LRMI_int(0x10, ®s) == 0) { - return 0; - } + close(vbe_fd); - /* Check for successful return. */ - if((regs.eax & 0xff) == 0x4f) { - /* Supported. */ - ret = 1; - } else { - /* Not supported. */ - ret = 0; + /* Set up pointers to usable memory. */ + normalize_addr(&ret->mode_list); + normalize_addr(&ret->oem_name); + if (ret->version[1] >= 3) { + normalize_addr(&ret->vendor_name); + normalize_addr(&ret->product_name); + normalize_addr(&ret->product_revision); } - /* Clean up and return. */ return ret; +#endif + return NULL; } /* Get EDID info. */ struct vbe_edid1_info *vbe_get_edid_info() { +#if defined(__i386__) struct LRMI_regs regs; unsigned char *mem; struct vbe_edid1_info *ret = NULL; @@ -276,62 +222,33 @@ struct vbe_edid1_info *vbe_get_edid_info() LRMI_free_real(mem); return ret; -} - -/* Figure out what the current video mode is. */ -int32_t vbe_get_mode() -{ - struct LRMI_regs regs; - int32_t ret = -1; +#endif +#if KERNEL_BOOT_INFO + int i, invalid, edid_fd; - /* Initialize LRMI. */ - if(LRMI_init() == 0) { - return -1; - } + struct vbe_edid1_info *ret = NULL; + ret = malloc(sizeof(struct vbe_edid1_info)); + if (ret == NULL) + return NULL; - memset(®s, 0, sizeof(regs)); - regs.eax = 0x4f03; + if ((edid_fd = open(BOOT_EDID_INFO, O_RDONLY)) < 0) + return NULL; - /* Do it. */ - iopl(3); - ioperm(0, 0x400, 1); + if (read(edid_fd, ret, EDID_BLOCK_SIZE) != EDID_BLOCK_SIZE) + return NULL; - if(LRMI_int(0x10, ®s) == 0) { - return -1; - } + close(edid_fd); - /* Save the returned value. */ - if((regs.eax & 0xffff) == 0x004f) { - ret = regs.ebx & 0xffff; - } else { - ret = -1; - } + /* Check that kernel could actually get something useful. */ + invalid = 1; + for (i = 0; invalid && i < 8; i++) + invalid = invalid && (ret->header[i] == EDID_INVALID); + if (invalid) + return NULL; - /* Clean up and return. */ return ret; -} - -/* Set the video mode. */ -void vbe_set_mode(u_int16_t mode) -{ - struct LRMI_regs regs; - - /* Initialize LRMI. */ - if(LRMI_init() == 0) { - return; - } - - memset(®s, 0, sizeof(regs)); - regs.eax = 0x4f02; - regs.ebx = mode; - - /* Do it. */ - iopl(3); - ioperm(0, 0x400, 1); - LRMI_int(0x10, ®s); - - /* Return. */ - return; +#endif + return NULL; } /* Just read ranges from the EDID. */ @@ -567,143 +484,3 @@ struct vbe_modeline *vbe_get_edid_modelines() return ret; } - -const void *vbe_save_svga_state() -{ - struct LRMI_regs regs; - unsigned char *mem; - u_int16_t block_size; - void *data; - - /* Initialize LRMI. */ - if(LRMI_init() == 0) { - return NULL; - } - - memset(®s, 0, sizeof(regs)); - regs.eax = 0x4f04; - regs.ecx = 0xffff; - regs.edx = 0; - - iopl(3); - ioperm(0, 0x400, 1); - - if(LRMI_int(0x10, ®s) == 0) { - return NULL; - } - - if((regs.eax & 0xff) != 0x4f) { - fprintf(stderr, "Get SuperVGA Video State not supported.\n"); - return NULL; - } - - if((regs.eax & 0xffff) != 0x004f) { - fprintf(stderr, "Get SuperVGA Video State Info failed.\n"); - return NULL; - } - - block_size = 64 * (regs.ebx & 0xffff); - - /* Allocate a chunk of memory. */ - mem = LRMI_alloc_real(block_size); - if(mem == NULL) { - return NULL; - } - memset(mem, 0, sizeof(block_size)); - - memset(®s, 0, sizeof(regs)); - regs.eax = 0x4f04; - regs.ecx = 0x000f; - regs.edx = 0x0001; - regs.es = ((u_int32_t)mem) >> 4; - regs.ebx = ((u_int32_t)mem) & 0x0f; - memset(mem, 0, block_size); - iopl(3); - ioperm(0, 0x400, 1); - - if(LRMI_int(0x10, ®s) == 0) { - LRMI_free_real(mem); - return NULL; - } - - if((regs.eax & 0xffff) != 0x004f) { - fprintf(stderr, "Get SuperVGA Video State Save failed.\n"); - return NULL; - } - - data = malloc(block_size); - if(data == NULL) { - LRMI_free_real(mem); - return NULL; - } - - /* Clean up and return. */ - memcpy(data, mem, block_size); - LRMI_free_real(mem); - return data; -} - -void vbe_restore_svga_state(const void *state) -{ - struct LRMI_regs regs; - unsigned char *mem; - u_int16_t block_size; - - /* Initialize LRMI. */ - if(LRMI_init() == 0) { - return; - } - - memset(®s, 0, sizeof(regs)); - regs.eax = 0x4f04; - regs.ecx = 0x000f; - regs.edx = 0; - - /* Find out how much memory we need. */ - iopl(3); - ioperm(0, 0x400, 1); - - if(LRMI_int(0x10, ®s) == 0) { - return; - } - - if((regs.eax & 0xff) != 0x4f) { - fprintf(stderr, "Get SuperVGA Video State not supported.\n"); - return; - } - - if((regs.eax & 0xffff) != 0x004f) { - fprintf(stderr, "Get SuperVGA Video State Info failed.\n"); - return; - } - - block_size = 64 * (regs.ebx & 0xffff); - - /* Allocate a chunk of memory. */ - mem = LRMI_alloc_real(block_size); - if(mem == NULL) { - return; - } - memset(mem, 0, sizeof(block_size)); - - memset(®s, 0, sizeof(regs)); - regs.eax = 0x4f04; - regs.ecx = 0x000f; - regs.edx = 0x0002; - regs.es = 0x2000; - regs.ebx = 0x0000; - memcpy(mem, state, block_size); - - iopl(3); - ioperm(0, 0x400, 1); - - if(LRMI_int(0x10, ®s) == 0) { - LRMI_free_real(mem); - return; - } - - if((regs.eax & 0xffff) != 0x004f) { - fprintf(stderr, "Get SuperVGA Video State Restore failed.\n"); - return; - } -} diff --git a/tools/ddcprobe/vbe.h b/tools/ddcprobe/vbe.h index 338d3bd88..32ccc7902 100644 --- a/tools/ddcprobe/vbe.h +++ b/tools/ddcprobe/vbe.h @@ -3,49 +3,41 @@ #ident "$Id$" #include <sys/types.h> +#if defined(__x86_64__) +#define KERNEL_BOOT_INFO 1 +#endif +#define BOOT_VBE_INFO "/proc/BOOT/vbe" +#define BOOT_EDID_INFO "/proc/BOOT/edid" +#define EDID_INVALID 0x13 +#define EDID_BLOCK_SIZE 128 +#define VBE_BLOCK_SIZE 512 + +union vbe_addr { + struct { + u_int16_t ofs; + u_int16_t seg; + } addr; + u_int32_t base; +#if defined(__i386__) + char *ptr; +#endif +}; + +typedef union vbe_addr vbe_addr_t; + /* Record returned by int 0x10, function 0x4f, subfunction 0x00. */ struct vbe_info { unsigned char signature[4]; unsigned char version[2]; - union { - struct { - u_int16_t ofs; - u_int16_t seg; - } addr; - const char *string; - } oem_name; + vbe_addr_t oem_name; u_int32_t capabilities; - union { - struct { - u_int16_t ofs; - u_int16_t seg; - } addr; - u_int16_t *list; - } mode_list; + vbe_addr_t mode_list; u_int16_t memory_size; /* VESA 3.0+ */ u_int16_t vbe_revision; - union { - struct { - u_int16_t ofs; - u_int16_t seg; - } addr; - const char *string; - } vendor_name; - union { - struct { - u_int16_t ofs; - u_int16_t seg; - } addr; - const char *string; - } product_name; - union { - struct { - u_int16_t ofs; - u_int16_t seg; - } addr; - const char *string; - } product_revision; + vbe_addr_t vendor_name; + vbe_addr_t product_name; + vbe_addr_t product_revision; char reserved1[222]; char reserved2[256]; } __attribute__ ((packed)); @@ -284,23 +276,9 @@ struct vbe_edid1_info { /* Get VESA information. */ struct vbe_info *vbe_get_vbe_info(); -/* Get information about a particular video mode, bitwise or with - VBE_LINEAR_FRAMEBUFFER to check if LFB version is supported. */ -struct vbe_mode_info *vbe_get_mode_info(u_int16_t mode); - /* Check if EDID reads are supported, and do them. */ -int vbe_get_edid_supported(); struct vbe_edid1_info *vbe_get_edid_info(); -/* Get the current video mode, -1 on error. */ -int32_t vbe_get_mode(); -/* Set a new video mode, bitwise or with VBE_LINEAR_FRAMEBUFFER. */ -void vbe_set_mode(u_int16_t mode); - -/* Save/restore the SVGA state. Call free() on the state record when done. */ -const void *vbe_save_svga_state(); -void vbe_restore_svga_state(const void *state); - /* Get the ranges of values suitable for the attached monitor. */ void vbe_get_edid_ranges(struct vbe_edid1_info *edid, unsigned char *hmin, unsigned char *hmax, |