no_comment

5 files changed, 26 insertions, 10 deletions

diff --git a/Makefile b/Makefile
index 8a15e3227..fda9e0ac1 100644
--- a/Makefile
+++ b/Makefile
@@ -35,4 +35,15 @@ clean:
 	for i in $(DIRS); do make -C $$i clean; done
 	find . -name "*~" -o -name ".#*" | xargs rm -f
 
+upload: tar install
+	touch /tmp/mdkinst_done
+	rm ~/gi/*_ks.img
+	cd /export/Mandrake ; tar cfz mdkinst.tgz mdkinst
+
+#	lftp -c "open -u devel mandrakesoft.com; cd ~/cooker/cooker/images ; mput ~/gi/gi_*.img ;"
+	lftp -c "open -u devel mandrakesoft.com; cd ~/tmp ; put /export/Mandrake/mdkinst.tgz ; put /tmp/mdkinst_done ; cd ~/cooker/cooker/Mandrake/base ; put /export/Mandrake/base/mdkinst_stage2.gz ; put ~/gi/perl-install/compss ; put ~/gi/perl-install/compssList ; put ~/gi/perl-install/compssUsers "
+#	lftp -c "open -u devel mandrakesoft.com; cd ~/cooker/contrib/others/src ; put ~/gi.tar.bz2"
+	rm -f /export/Mandrake/mdkinst.tgz
+	rm -f /tmp/mdkinst_done
+
 # mkisofs -R -b images/gi_cdrom.img -c images/.catalog /tmp/r /mnt/disk/ | cdrecord -v -eject speed=6 dev=1,0 -
diff --git a/perl-install/install2.pm b/perl-install/install2.pm
index cbc7cc200..5226bbbab 100644
--- a/perl-install/install2.pm
+++ b/perl-install/install2.pm
@@ -533,7 +533,7 @@ sub main {
 	add2hash(network::findIntf($o->{intf} ||= [], $l->{DEVICE}), $l);
     }
 
-    eval { run_program::run("rmmod", "vfat") };
+    modules::unload($_) foreach qw(vfat msdos fat);
     modules::load_deps("/modules/modules.dep");
     modules::read_stage1_conf("/tmp/conf.modules");
     modules::read_already_loaded();
diff --git a/perl-install/install_any.pm b/perl-install/install_any.pm
index 78f3d51ca..8d0495323 100644
--- a/perl-install/install_any.pm
+++ b/perl-install/install_any.pm
@@ -21,6 +21,7 @@ use partition_table_raw;
 use devices;
 use fsedit;
 use network;
+use modules;
 use lilo;
 use detect_devices;
 use pkgs;
@@ -333,8 +334,10 @@ sub killCardServices {
 
 sub ejectCdrom() {
     cat_("/proc/mounts") =~ m|/tmp/(\S+)\s+/tmp/rhimage|;
-    my $f = eval { detect_devices::tryOpen($1) } or next;
-    ioctl $f, c::CDROM_LOCKDOOR(), 0;
+    my $f = eval { detect_devices::tryOpen($1) } or return;
+    getFile("XXX"); #- close still opened filehandle
+    eval { fs::umount("/tmp/rhimage") };
+    ioctl $f, c::CDROM_LOCKDOOR(), 0; #- in case the umount fails...
     ioctl $f, c::CDROMEJECT(), 1;
 }
 
@@ -406,7 +409,7 @@ sub loadO {
 	-e $f or $f .= ".pl";
 	$o = loadO($O, $f);
 	fs::umount("/mnt") unless $::testing;
-	eval { run_program::run("rmmod", "vfat") };
+	modules::unload($_) foreach qw(vfat fat);
     } else {
 	-e $f or $f .= ".pl";
 	{
@@ -414,10 +417,11 @@ sub loadO {
 	    open F, $f or die _("Error reading file $f");
 
 	    local $/ = "\0";
+	    no strict;
 	    eval <F>;
 	}
 	$@ and log::l _("Bad kickstart file %s (failed %s)", $f, $@);
-	add2hash_($o, $O);
+	add2hash_($o ||= {}, $O);
     }
     bless $o, ref $O;
 }
diff --git a/perl-install/install_steps_interactive.pm b/perl-install/install_steps_interactive.pm
index 81ba51710..5e8eb1c33 100644
--- a/perl-install/install_steps_interactive.pm
+++ b/perl-install/install_steps_interactive.pm
@@ -152,8 +152,8 @@ sub setupSCSI { setup_thiskind($_[0], 'scsi', $_[1], $_[2]) }
 sub ask_mntpoint_s {
     my ($o, $fstab) = @_;
     my @fstab = grep { isExt2($_) } @$fstab;
-    @fstab = grep { !isSwap($_) } @$fstab if @fstab == 0;
-    @fstab = @$fstab if @fstab == 0;
+    @fstab = grep { isSwap($_) } @$fstab if @fstab == 0;
+#    @fstab = @$fstab if @fstab == 0;
     die _("no available partitions") if @fstab == 0;
 
     my $msg = sub { "$_->{device} " . _("(%dMb)", $_->{size} / 1024 / 2) };
@@ -889,8 +889,6 @@ _("Some steps are not completed.
 
 Do you really want to quit now?"), 0);
 
-    $o->SUPER::exitInstall;
-
     $o->ask_warn('',
 _("Congratulations, installation is complete.
 Remove the boot media and press return to reboot.
@@ -900,6 +898,8 @@ consult the Errata available from http://www.linux-mandrake.com/.
 
 Information on configuring your system is available in the post
 install chapter of the Official Linux-Mandrake User's Guide.")) if $alldone && !$::g_auto_install;
+
+    $o->SUPER::exitInstall;
 }
 
 
diff --git a/perl-install/mouse.pm b/perl-install/mouse.pm
index 6303d3b1a..9dd539623 100644
--- a/perl-install/mouse.pm
+++ b/perl-install/mouse.pm
@@ -12,6 +12,7 @@ use pci_probing::main;
 use detect_devices;
 use run_program;
 use commands;
+use modules;
 use log;
 
 my @mouses_fields = qw(nbuttons device MOUSETYPE XMOUSETYPE FULLNAME);
@@ -91,7 +92,7 @@ sub detect() {
     my %l;
     eval { commands::modprobe("serial") };
     @l{qw(FULLNAME nbuttons MOUSETYPE XMOUSETYPE device)} = split("\n", `mouseconfig --nointeractive 2>/dev/null`) and return \%l;
-    eval { run_program::run("rmmod", "serial") };
+    modules::unload("serial");
 
     if (my ($c) = pci_probing::main::probe("SERIAL_USB")) {
 	eval { modules::load($c->[1], 'usbmouse') };