no_comment

16 files changed, 124 insertions, 130 deletions

diff --git a/Makefile b/Makefile
index 603b25d84..18e1a5970 100644
--- a/Makefile
+++ b/Makefile
@@ -3,7 +3,7 @@ ARCH := $(patsubst sparc%,sparc,$(ARCH))
 
 RELEASE_BOOT_IMG = hd.img cdrom.img network.img
 ifeq (i386,$(ARCH))
-RELEASE_BOOT_IMG += pcmcia.img blank.img
+RELEASE_BOOT_IMG += pcmcia.img blank.img all.img other.img
 endif
 ifeq (sparc,$(ARCH))
 BOOT_IMG = live.img tftp.img tftprd.img live64.img tftp64.img tftprd64.img
@@ -44,7 +44,7 @@ build: $(BOOT_IMG)
 autoboot:
 ifeq (i386,$(ARCH))
 	install -d $(ROOTDEST)/boot
-	cp -f vmlinuz {hd,cdrom,pcmcia,network}.rdz $(ROOTDEST)/boot
+	cp -f vmlinuz {hd,cdrom,pcmcia,network,all,other}.rdz $(ROOTDEST)/boot
 	/usr/sbin/rdev -v $(ROOTDEST)/boot/vmlinuz 788
 endif
 
diff --git a/make_boot_img b/make_boot_img
index e8392dfaf..981c8c6fa 100755
--- a/make_boot_img
+++ b/make_boot_img
@@ -1,6 +1,6 @@
 #!/usr/bin/perl
 
-@ARGV >= 2 or die "usage: $0 <image> cdrom|hd|network|blank|pcmcia|live|tftp|tftprd\n";
+@ARGV >= 2 or die "usage: $0 <image> all|other|cdrom|hd|network|blank|pcmcia|live|tftp|tftprd\n";
 
 use Config;
 Config->import;
@@ -25,6 +25,8 @@ _ "$sudo mkdir $mnt" unless -e $mnt;
 _ "$sudo mkdir ${mnt}2" unless -e "${mnt}2";
 
 $install = $ {{
+    all => "full-install",
+    other => "full-install",
     blank => "full-install",
     live => "full-install",
     tftp => "full-install",
@@ -53,7 +55,7 @@ sub initrd {
     my $tar = "$instdir/install1.tar.bz2";
 
     __ "$sudo umount $tmp $mnt 2>/dev/null";
-    _ "dd if=/dev/zero of=$tmp bs=1k count=2000";
+    _ "dd if=/dev/zero of=$tmp bs=1k count=" . ($type eq "all" ? 4000 : 2000);
     _ "$mke2fs $tmp";
     _ "$sudo mount -t ext2 $tmp $mnt -o loop";
 
@@ -67,7 +69,8 @@ sub initrd {
 	_ "$sudo cp -a /etc/pcmcia $mnt/etc";
 	_ "$sudo patch -p0 -d $mnt/etc < $instdir/pcmcia_config.patch";
     }
-    _ "$sudo cp -f install_${type}_modules/* $mnt/modules/" if -d "install_${type}_modules";
+    my $ftype = $type =~ /^(all)$/ ? "pcmcia" : $type;
+    _ "$sudo cp -f install_${ftype}_modules/* $mnt/modules/" if -d "install_${ftype}_modules";
     _ "$sudo cp -f modules$I/${ltype}_modules.cgz $mnt/modules/modules$I.cgz" if $type !~ /blank/;
     _ "$sudo cp -f modules$I/modules.dep $mnt/modules/";
     _ "$sudo umount $mnt";
@@ -86,13 +89,16 @@ sub boot_img_i386 {
     __ "$sudo umount $mnt 2>/dev/null";
     if ($type eq "hd") {
 	_ "bunzip2 -c $instdir/installinit/msgboot.img.bz2 > $img";
+    } elsif ($type eq "all") {
+	_ "bunzip2 -c $instdir/installinit/msgboot-graphicallogo-2880.img.bz2 > $img";
     } else {
 	_ "bunzip2 -c $instdir/installinit/msgboot-graphicallogo.img.bz2 > $img";
     }
     _ "$sudo mount -t msdos -o umask=0 $img $mnt -o loop";
     _ "cat vmlinuz > $mnt/vmlinuz" if $type !~ /blank/;
     -f "$type.rdz" ? _ "cp -f $type.rdz $mnt" : initrd("${mnt}2", "$mnt/$type.rdz");
-    
+
+    my $ftype = $type =~ /^(other|all)$/ ? "cdrom" : $type;
     my $timeout = 72;
     output("$mnt/syslinux.cfg", "
 default linux
@@ -103,34 +109,34 @@ F1 help.msg
 F2 boot.msg
 label linux
   kernel vmlinuz
-  append ramdisk_size=32000 initrd=$type.rdz $type vga=788
+  append ramdisk_size=32000 initrd=$type.rdz $ftype vga=788
 label vgalo
   kernel vmlinuz
-  append ramdisk_size=32000 initrd=$type.rdz $type vga=785
+  append ramdisk_size=32000 initrd=$type.rdz $ftype vga=785
 label vgahi
   kernel vmlinuz
-  append ramdisk_size=32000 initrd=$type.rdz $type vga=791
+  append ramdisk_size=32000 initrd=$type.rdz $ftype vga=791
 label vga16
   kernel vmlinuz
-  append ramdisk_size=32000 initrd=$type.rdz $type vga16
+  append ramdisk_size=32000 initrd=$type.rdz $ftype vga16
 label text
   kernel vmlinuz
-  append ramdisk_size=32000 initrd=$type.rdz $type text
+  append ramdisk_size=32000 initrd=$type.rdz $ftype text
 label patch
   kernel vmlinuz
-  append ramdisk_size=32000 initrd=$type.rdz $type patch vga=788
+  append ramdisk_size=32000 initrd=$type.rdz $ftype patch vga=788
 label expert
   kernel vmlinuz
-  append ramdisk_size=32000 initrd=$type.rdz $type expert vga=788
+  append ramdisk_size=32000 initrd=$type.rdz $ftype expert vga=788
 label rescue
   kernel vmlinuz
-  append ramdisk_size=32000 initrd=$type.rdz $type rescue rw
+  append ramdisk_size=32000 initrd=$type.rdz $ftype rescue rw
 label oem
   kernel vmlinuz
   append ramdisk_size=32000 initrd=cdrom.rdz cdrom rescue oem rw
 label auto
   kernel vmlinuz
-  append ramdisk_size=32000 initrd=$type.rdz $type auto_install=auto_inst.cfg.pl
+  append ramdisk_size=32000 initrd=$type.rdz $ftype auto_install=auto_inst.cfg.pl
 ");
     _ "sync";
     _ "df $mnt";
diff --git a/perl-install/fs.pm b/perl-install/fs.pm
index 0c07c9994..5b5876415 100644
--- a/perl-install/fs.pm
+++ b/perl-install/fs.pm
@@ -8,12 +8,10 @@ use log;
 use devices;
 use partition_table qw(:types);
 use run_program;
-use nfs;
 use swap;
 use detect_devices;
 use commands;
 use modules;
-use raid;
 use fsedit;
 use loopback;
 
@@ -136,7 +134,8 @@ sub real_format_part {
 }
 sub format_part {
     my ($raid, $part, $prefix) = @_;
-    if (raid::is($part)) {
+    if (isRAID($part)) {
+	require raid;
 	raid::format_part($raid, $part);
     } elsif (isLoopback($part)) {
 	loopback::format_part($part, $prefix);
@@ -187,7 +186,7 @@ sub mount($$$;$) {
 
     if ($fs eq 'nfs') {
 	log::l("calling nfs::mount($dev, $where)");
-	nfs::mount($dev, $where) or die _("nfs mount failed");
+#	nfs::mount($dev, $where) or die _("nfs mount failed");
     } elsif ($fs eq 'smb') {
 	die "no smb yet...";
     } else {
diff --git a/perl-install/fsedit.pm b/perl-install/fsedit.pm
index a868493f4..72a96cfd9 100644
--- a/perl-install/fsedit.pm
+++ b/perl-install/fsedit.pm
@@ -14,9 +14,8 @@ use Data::Dumper;
 use fsedit;
 use devices;
 use loopback;
-use raid;
-use fs;
 use log;
+use fs;
 
 #-#####################################################################################
 #- Globals
@@ -110,12 +109,6 @@ sub free_space {
     sum map { $_->{size} } map { partition_table::get_holes($_) } @_;
 }
 
-sub hasRAID {
-    my $b = 0;
-    map { $b ||= isRAID($_) } get_fstab(@_);
-    $b;
-}
-
 sub is_one_big_fat {
     my ($hds) = @_;
     @$hds == 1 or return;
@@ -261,7 +254,7 @@ sub check_mntpoint {
     };
     $check->($fake_part) unless $mntpoint eq '/' && $loopbackDevice; #- '/' is a special case, no loop check
 
-    die "raid / with no /boot" if $mntpoint eq "/" && raid::is($part) && !has_mntpoint("/boot", $hds);
+    die "raid / with no /boot" if $mntpoint eq "/" && isMDRAID($part) && !has_mntpoint("/boot", $hds);
     die _("You need a true filesystem (ext2, reiserfs) for this mount point\n") if !isTrueFS($part) && member($mntpoint, qw(/ /usr));
 #-    if ($part->{start} + $part->{size} > 1024 * $hd->cylinder_size() && arch() =~ /i386/) {
 #-	  die "/boot ending on cylinder > 1024" if $mntpoint eq "/boot";
diff --git a/perl-install/install2.pm b/perl-install/install2.pm
index 342255535..ff9a30c87 100644
--- a/perl-install/install2.pm
+++ b/perl-install/install2.pm
@@ -12,22 +12,19 @@ use vars qw($o $version);
 #-######################################################################################
 use common qw(:common :file :system :functional);
 use install_any qw(:all);
-use log;
+use install_steps;
 use commands;
-use network;
 use lang;
 use keyboard;
 use mouse;
-use fs;
-use raid;
 use fsedit;
 use devices;
 use partition_table qw(:types);
 use modules;
 use detect_devices;
 use run_program;
-
-use install_steps;
+use log;
+use fs;
 
 $::VERSION = "7.1";
 #-$::corporate=1;
@@ -289,6 +286,7 @@ sub formatPartitions {
 	home mnt tmp var var/tmp var/lib var/lib/rpm var/lib/urpmi);
     mkdir "$o->{prefix}/$_", 0700 foreach qw(root);
 
+    require raid;
     raid::prepare_prefixed($o->{raid}, $o->{prefix});
 
     my $d = "/initrd/loopfs/lnx4win";
@@ -372,6 +370,7 @@ STORAGE=
 sub configureNetwork {
     $::live and return;
     #- get current configuration of network device.
+    require network;
     eval { network::read_all_conf($o->{prefix}, $o->{netc} ||= {}, $o->{intf} ||= {}) };
     $o->configureNetwork($_[1] == 1);
 }
@@ -642,12 +641,15 @@ sub main {
 
     $::o = $o = $o_;
 
-    #- get stage1 network configuration if any.
-    $o->{netc} ||= network::read_conf("/tmp/network");
-    if (my ($file) = glob_('/tmp/ifcfg-*')) {
-	log::l("found network config file $file");
-	my $l = network::read_interface_conf($file);
-	add2hash(network::findIntf($o->{intf} ||= {}, $l->{DEVICE}), $l);
+    if (-e "/tmp/network") {
+	require network;
+	#- get stage1 network configuration if any.
+	$o->{netc} ||= network::read_conf("/tmp/network");
+	if (my ($file) = glob_('/tmp/ifcfg-*')) {
+	    log::l("found network config file $file");
+	    my $l = network::read_interface_conf($file);
+	    add2hash(network::findIntf($o->{intf} ||= {}, $l->{DEVICE}), $l);
+	}
     }
 
     #-the main cycle
diff --git a/perl-install/install_any.pm b/perl-install/install_any.pm
index 49a31cf10..201efe590 100644
--- a/perl-install/install_any.pm
+++ b/perl-install/install_any.pm
@@ -15,18 +15,16 @@ use vars qw(@ISA %EXPORT_TAGS @EXPORT_OK @needToCopy);
 #- misc imports
 #-######################################################################################
 use common qw(:common :system :functional :file);
-use commands;
 use run_program;
 use partition_table qw(:types);
 use partition_table_raw;
 use devices;
 use fsedit;
-use network;
 use modules;
 use detect_devices;
-use fs;
 use any;
 use log;
+use fs;
 
 #- package that have to be copied for proper installation (just to avoid changing cdrom)
 #- here XFree86 is copied entirey if not already installed, maybe better to copy only server.
@@ -158,11 +156,12 @@ sub setup_postinstall_rpms($$) {
     $postinstall_rpms and return;
     $postinstall_rpms = "$prefix/usr/postinstall-rpm";
 
+    require pkgs;
+    require commands;
+
     log::l("postinstall rpms directory set to $postinstall_rpms");
     commands::mkdir_('-p', $postinstall_rpms);
 
-    require pkgs;
-
     #- compute closure of unselected package that may be copied,
     #- don't complain if package does not exists as it may happen
     #- for the various architecture taken into account (X servers).
@@ -182,6 +181,7 @@ sub setup_postinstall_rpms($$) {
     commands::cp((map { "/tmp/rhimage/" . relGetFile(pkgs::packageFile($_)) } @toCopy), $postinstall_rpms);
 }
 sub clean_postinstall_rpms() {
+    require commands;
     $postinstall_rpms and -d $postinstall_rpms and commands::rm('-rf', $postinstall_rpms);
 }
 
@@ -342,6 +342,7 @@ sub setAuthentication {
 	    $_ = "#~$_" unless /^#/;
 	    $_ .= "$t $nis\n" if eof;
 	} "$p/etc/yp.conf";
+	require network;
 	network::write_conf("$p/etc/sysconfig/network", $o->{netc});
     }
 }
@@ -599,6 +600,7 @@ sub generate_ks_cfg {
     if ($intf{BOOTPROTO} =~ /^(dhcp|bootp)$/) {
 	$ks .= "network --bootproto $intf{BOOTPROTO}\n";
     } else {
+	require network;
 	my %l = (ip => $intf{IPADDR}, netmask => $intf{NETMASK}, gateway => $o->{netc}{GATEWAY});
 	$ks .= "network " . join(" ", map_each { $::b && "--$::a $::b" } %l);
 	$ks .= " --nameserver $_" foreach network::dnsServers($o->{netc});
diff --git a/perl-install/install_interactive.pm b/perl-install/install_interactive.pm
index 641d9ad59..e51fa5a8b 100644
--- a/perl-install/install_interactive.pm
+++ b/perl-install/install_interactive.pm
@@ -6,15 +6,14 @@ use strict;
 use vars;
 
 use common qw(:common :functional);
-use fs;
-use fsedit;
-use log;
 use partition_table qw(:types);
 use partition_table_raw;
 use detect_devices;
 use install_steps;
 use devices;
-use modules;
+use fsedit;
+use log;
+use fs;
 
 
 sub tellAboutProprietaryModules {
@@ -30,6 +29,7 @@ sub partition_with_diskdrake {
     my $ok; 
     do {
 	$ok = 1;
+	require diskdrake;
 	diskdrake::main($hds, $o->{raid}, interactive_gtk->new, $o->{partitions}, $nowizard);
 	delete $o->{wizard} and return partitionWizard($o, 'nodiskdrake');
 	my @fstab = fsedit::get_fstab(@$hds);
@@ -154,7 +154,6 @@ When sure, press Ok.")) or return;
     }
 
     if (!$readonly && ref($o) =~ /gtk/) { #- diskdrake only available in gtk for now
-	require diskdrake;
 	$solutions{diskdrake} = [ 0, ($::beginner ? _("Expert mode") : _("Use diskdrake")), sub { partition_with_diskdrake($o, $hds, 'nowizard') } ];
     }
 
diff --git a/perl-install/install_steps.pm b/perl-install/install_steps.pm
index 9de509b72..298189c21 100644
--- a/perl-install/install_steps.pm
+++ b/perl-install/install_steps.pm
@@ -15,14 +15,12 @@ use detect_devices;
 use modules;
 use run_program;
 use lang;
-use raid;
 use keyboard;
-use log;
 use fsedit;
 use loopback;
-use commands;
-use network;
+#use commands;
 use any;
+use log;
 use fs;
 
 @filesToSaveForUpgrade = qw(
@@ -291,6 +289,7 @@ sub beforeInstallPackages {
     $::live or fs::write($o->{prefix}, $o->{fstab}, $o->{manualFstab}, $o->{useSupermount});
 
     log::l("before install packages, after adding localhost in hosts");
+    require network;
     network::add2hosts("$o->{prefix}/etc/hosts", "localhost.localdomain", "127.0.0.1");
 
     log::l("before openning database");
@@ -502,6 +501,7 @@ sub selectMouse($) {
 #------------------------------------------------------------------------------
 sub configureNetwork {
     my ($o) = @_;
+    require network;
     network::configureNetwork2($o->{prefix}, $o->{netc}, $o->{intf});
 }
 
@@ -629,6 +629,7 @@ sub addUser($) {
 		chmod $mode, "$p$u->{home}";
 	    }
 	}
+	require commands;
 	eval { commands::chown_("-r", "$u->{uid}.$u->{gid}", "$p$u->{home}") }
 	    if $u->{uid} != $u->{oldu} || $u->{gid} != $u->{oldg};
     }
@@ -736,6 +737,7 @@ sub configureXBefore {
     my ($o) = @_;
     my $xkb = $o->{X}{keyboard}{xkb_keymap} || keyboard::keyboard2xkb($o->{keyboard});
     if (!-e "$o->{prefix}/usr/X11R6/lib/X11/xkb/symbols/$xkb" && (my $f = keyboard::xmodmap_file($o->{keyboard}))) {
+	require commands;
 	commands::cp("-f", $f, "$o->{prefix}/etc/X11/xinit/Xmodmap");	
 	$xkb = '';
     }
diff --git a/perl-install/install_steps_auto_install.pm b/perl-install/install_steps_auto_install.pm
index 6f22b2522..f6043bf75 100644
--- a/perl-install/install_steps_auto_install.pm
+++ b/perl-install/install_steps_auto_install.pm
@@ -2,7 +2,6 @@ package install_steps_auto_install;
 
 use diagnostics;
 use strict;
-use netconnect;
 use lang;
 use vars qw(@ISA);
 
@@ -36,7 +35,7 @@ sub new {
 sub configureNetwork {
     my ($o) = @_;
     modules::load_thiskind('net');
-    netconnect::main($o->{prefix}, $o->{netcnx} ||= {}, $o->{netc}, $o->{mouse}, $o, $o->{pcmcia}, $o->{intf}, 1);
+    goto &install_steps::configureNetwork;
 }
 
 sub enteringStep($$$) {
diff --git a/perl-install/install_steps_gtk.pm b/perl-install/install_steps_gtk.pm
index fb9bc4504..ed254b816 100644
--- a/perl-install/install_steps_gtk.pm
+++ b/perl-install/install_steps_gtk.pm
@@ -9,28 +9,17 @@ use vars qw(@ISA);
 #-######################################################################################
 #- misc imports
 #-######################################################################################
+use install_steps_interactive;
+use interactive_gtk;
 use common qw(:common :file :functional :system);
-use partition_table qw(:types);
 use my_gtk qw(:helpers :wrappers);
 use Gtk;
-#-use Gtk::XmHTML;
 use devices;
-use fsedit;
-use commands;
 use modules;
-use pkgs;
-use partition_table qw(:types);
-use partition_table_raw;
-use install_steps;
-use install_steps_interactive;
-use interactive_gtk;
 use install_gtk;
 use install_any;
-use diskdrake;
 use log;
 use mouse;
-use help;
-use lang;
 
 #-######################################################################################
 #- In/Out Steps Functions
@@ -189,9 +178,11 @@ sub selectMouse {
     $o->SUPER::selectMouse($force);
     $old{FULLNAME} eq $o->{mouse}{FULLNAME} && !$force and return;
 
+    local $my_gtk::grab = 1; #- unsure a crazy mouse don't go wild clicking everywhere
+
     while (1) {
 	log::l("telling X server to use another mouse");
-	eval { commands::modprobe("serial") } if $o->{mouse}{device} =~ /ttyS/;
+	eval { modules::load('serial') } if $o->{mouse}{device} =~ /ttyS/;
 
 	if (!$::testing) {
 	    symlinkf($o->{mouse}{device}, "/dev/mouse");
@@ -218,6 +209,7 @@ sub chooseSizeToInstall {
     my $spin = gtkset_usize(new Gtk::SpinButton($adj, 0, 0), 20, 0);
     my $val;
 
+    require pkgs;
     gtkadd($w->{window},
 	  gtkpack(new Gtk::VBox(0,20),
 		  _("The total size for the groups you have selected is approximately %d MB.\n", pkgs::correctSize($max_size_ / sqr(1024))) .
diff --git a/perl-install/install_steps_interactive.pm b/perl-install/install_steps_interactive.pm
index 7954d31cf..04a5ac94a 100644
--- a/perl-install/install_steps_interactive.pm
+++ b/perl-install/install_steps_interactive.pm
@@ -17,17 +17,13 @@ use install_steps;
 use install_interactive;
 use install_any;
 use detect_devices;
-use netconnect;
 use run_program;
-use commands;
 use devices;
 use fsedit;
-use network;
-use raid;
+use loopback;
 use mouse;
 use modules;
 use lang;
-use loopback;
 use keyboard;
 use any;
 use fs;
@@ -470,6 +466,7 @@ sub afterInstallPackages($) {
 #------------------------------------------------------------------------------
 sub configureNetwork {
     my ($o, $first_time) = @_;
+    require netconnect;
     netconnect::main($o->{prefix}, $o->{netcnx} ||= {}, $o->{netc}, $o->{mouse},  $o, $o->{pcmcia}, $o->{intf}, $first_time);
 }
 
@@ -872,16 +869,15 @@ sub configureX {
 #------------------------------------------------------------------------------
 sub generateAutoInstFloppy($) {
     my ($o) = @_;
-
     $::expert || $::g_auto_install or return;
 
     my ($floppy) = detect_devices::floppies();
-
     $o->ask_yesorno('', 
 _("Do you want to generate an auto install floppy for linux replication?"), $floppy) or return;
 
     $o->ask_warn('', _("Insert a blank floppy in drive %s", $floppy));
 
+    require commands;
     my $dev = devices::make($floppy);
 
     my $image = $o->{pcmcia} ? "pcmcia" :
diff --git a/perl-install/install_steps_stdio.pm b/perl-install/install_steps_stdio.pm
index 86d10cb48..974e21c23 100644
--- a/perl-install/install_steps_stdio.pm
+++ b/perl-install/install_steps_stdio.pm
@@ -7,12 +7,9 @@ use vars qw(@ISA);
 @ISA = qw(install_steps_interactive interactive_stdio);
 
 use common qw(:common);
-use devices;
-use run_program;
 use interactive_stdio;
 use install_steps_interactive;
-use install_any;
-use log;
+use lang;
 
 sub new($$) {
     my ($type, $o) = @_;
diff --git a/perl-install/modules.pm b/perl-install/modules.pm
index f6be1262e..8fad8efba 100644
--- a/perl-install/modules.pm
+++ b/perl-install/modules.pm
@@ -30,7 +30,7 @@ arch() =~ /^sparc/ ? (
   "3c90x" => "3Com 3c90x (Cyclone/Hurricane/Tornado)",
   "at1700" => "Allied Telesis AT1700",
   "ac3200" => "Ansel Communication AC3200",
-#BIG  "acenic" => "AceNIC Gigabit Ethernet",
+  "acenic" => "AceNIC Gigabit Ethernet",
   "pcnet32" => "AMD PC/Net 32",
   "82596" => "Apricot 82596",
 #  "atp" => "ATP", # builtin the kernel
@@ -82,10 +82,10 @@ arch() =~ /^sparc/ ? (
   "sb1000" => "sb1000",
   "sbni" => "sbni",
   "sis900" => "sis900",
-#BIG  "sk98lin" => "Syskonnect (Schneider & Koch)|Gigabit Ethernet",
+  "sk98lin" => "Syskonnect (Schneider & Koch)|Gigabit Ethernet",
 ),
   "3c59x" => "3com 3c59x (Vortex)",
-#BIG  "de4x5" => "Digital 425,434,435,450,500",
+  "de4x5" => "Digital 425,434,435,450,500",
   "rtl8139" => "RealTek RTL8129/8139",
 }],
 [ 'net_raw', {
@@ -111,12 +111,12 @@ arch() =~ /^sparc/ ? (
   "advansys" => "AdvanSys Adapters",
   "in2000" => "Always IN2000",
   "AM53C974" => "AMD SCSI",
-#unsused  "BusLogic" => "BusLogic Adapters",
+  "BusLogic" => "BusLogic Adapters",
   "dtc" => "DTC 3180/3280",
-#unsused  "seagate" => "Future Domain TMC-885, TMC-950",
-#unsused  "fdomain" => "Future Domain TMC-16x0",
+  "seagate" => "Future Domain TMC-885, TMC-950",
+  "fdomain" => "Future Domain TMC-16x0",
   "initio" => "Initio",
-#unsused  "g_NCR5380" => "NCR 5380",
+  "g_NCR5380" => "NCR 5380",
   "NCR53c406a" => "NCR 53c406a",
   "53c7,8xx" => "NCR 53c7xx",
   "qlogicfas" => "Qlogic FAS",
@@ -128,12 +128,12 @@ arch() =~ /^sparc/ ? (
 
   "a100u2w" => "a100u2w",
   "atp870u" => "atp870u (Acard/Artop)",
-#unsused  "dc395x_trm" => "dc395x_trm",
+  "dc395x_trm" => "dc395x_trm",
   "psi240i" => "psi240i",
   "qlogicfc" => "qlogicfc",
   "sim710" => "sim710",
   "sym53c416" => "sym53c416",
-#unsused  "tmscsim" => "tmscsim",
+  "tmscsim" => "tmscsim",
 ),
   "aic7xxx" => "Adaptec 2740, 2840, 2940",
   "ncr53c8xx" => "NCR 53C8xx PCI",
@@ -144,8 +144,8 @@ arch() =~ /^sparc/ ? (
 [ 'scsi_raw', {
   "scsi_mod" => "scsi_mod",
   "sd_mod" => "sd_mod",
-  "ide-mod" => "ide-mod",
-  "ide-probe" => "ide-probe",
+#-  "ide-mod" => "ide-mod",
+#-  "ide-probe" => "ide-probe",
 #-  "ide-probe-mod" => "ide-probe-mod",
 }],
 [ 'disk', {
@@ -153,33 +153,33 @@ arch() =~ /^sparc/ ? (
   "pluto" => "Sun SparcSTORAGE Array SCSI", #- name it "fc4:soc:pluto" ?
 ) : arch() =~ /alpha/ ? () : (
   "DAC960" => "Mylex DAC960",
-#unused  "dpt_i2o" => "Distributed Tech SmartCache/Raid I-IV Controller", # not there anymore?
+  "dpt_i2o" => "Distributed Tech SmartCache/Raid I-IV Controller", # not there anymore?
   "megaraid" => "AMI MegaRAID",
   "aacraid" => "AACxxx Raid Controller",
   "cpqarray" => "Compaq Smart-2/P RAID Controller",
   "gdth" => "ICP Disk Array Controller",
   "ips" => "IBM ServeRAID controller",
-#unused	 "eata" => "EATA SCSI PM2x24/PM3224",
-#unused	 "eata_pio" => "EATA PIO Adapters",
-#unused	 "eata_dma" => "EATA DMA Adapters",
+  "eata" => "EATA SCSI PM2x24/PM3224",
+  "eata_pio" => "EATA PIO Adapters",
+  "eata_dma" => "EATA DMA Adapters",
   "ppa" => "Iomega PPA3 (parallel port Zip)",
   "imm" => "Iomega Zip (new driver)",
 ),
 }],
 [ 'disk_raw', {
-  "ide-disk" => "IDE disk",
+#-  "ide-disk" => "IDE disk",
 }],
 [ 'cdrom', {
 arch() !~ /^sparc|alpha/ ? (
   "sbpcd" => "SoundBlaster/Panasonic",
-#-  "aztcd" => "Aztech CD",
-#-  "gscd" => "Goldstar R420",
-#-  "isp16" => "ISP16/MAD16/Mozart",
-#-  "mcd" => "Mitsumi", #- removed for space
-#-  "mcdx" => "Mitsumi (alternate)",
-#-  "optcd" => "Optics Storage 8000",
-#-  "cm206" => "Phillips CM206/CM260",
-#-  "sjcd" => "Sanyo",
+  "aztcd" => "Aztech CD",
+  "gscd" => "Goldstar R420",
+  "isp16" => "ISP16/MAD16/Mozart",
+  "mcd" => "Mitsumi", #- removed for space
+  "mcdx" => "Mitsumi (alternate)",
+  "optcd" => "Optics Storage 8000",
+  "cm206" => "Phillips CM206/CM260",
+  "sjcd" => "Sanyo",
   "cdu31a" => "Sony CDU-31A",
   "sonycd535" => "Sony CDU-5xx",
 ) : (),
@@ -237,7 +237,7 @@ arch() !~ /^sparc/ ? (
   "3c589_cs" => "3c589_cs",
   "parport_cs" => "parport_cs", 
   "3c575_cb" => "3c575_cb",
-#unused  "apa1480_cb" => "apa1480_cb",
+  "apa1480_cb" => "apa1480_cb",
   "cb_enabler" => "cb_enabler",
   "epic_cb" => "epic_cb",
   "iflash2+_mtd" => "iflash2+_mtd",
@@ -327,9 +327,18 @@ my %type_aliases = (
   scsi => 'disk',
 );
 
-my @skip_modules_on_stage1 =
-  arch() =~ /alpha/ ? qw(sb1000) :
-  ();
+my @skip_big_modules_on_stage1 = 
+qw(
+acenic sk98lin de4x5
+BusLogic seagate fdomain g_NCR5380 dc395x_trm tmscsim
+dpt_i2o eata eata_pio eata_dma
+apa1480_cb
+aztcd gscd isp16 mcd mcdx optcd cm206 sjcd 
+);
+
+my @skip_modules_on_stage1 = (
+  arch() =~ /alpha/ ? qw(sb1000) : (),
+);
 
 
 my @drivers_fields = qw(text type);
@@ -347,8 +356,11 @@ while (my ($k, $v) = each %drivers) {
 sub module_of_type__4update_kernel {
     my ($type) = @_;
     $type = join "|", map { $_, $_ . "_raw" } split ' ', $type;
-    my %skip; @skip{@skip_modules_on_stage1} = ();
-    grep { !exists $skip{$_} } grep { $drivers{$_}{type} =~ /^($type)$/ } keys %drivers;
+    my %skip; 
+    @skip{@skip_modules_on_stage1} = ();
+    @skip{@skip_big_modules_on_stage1} = () if $type !~ /big/;
+    "big" =~ /^($type)$/ ? @skip_big_modules_on_stage1 : (),
+      grep { !exists $skip{$_} } grep { $drivers{$_}{type} =~ /^($type)$/ } keys %drivers;
 }
 sub module_of_type {
     my ($type) = @_;
diff --git a/perl-install/partition_table.pm b/perl-install/partition_table.pm
index 249416ba3..95bbe7da8 100644
--- a/perl-install/partition_table.pm
+++ b/perl-install/partition_table.pm
@@ -1,24 +1,19 @@
 package partition_table;
 
-use diagnostics;
-use strict;
-use vars qw(@ISA %EXPORT_TAGS @EXPORT_OK @important_types @important_types2 @fields2save);
+#use diagnostics;
+#use strict;
+#use vars qw(@ISA %EXPORT_TAGS @EXPORT_OK @important_types @important_types2 @fields2save);
 use Data::Dumper;
 
 @ISA = qw(Exporter);
 %EXPORT_TAGS = (
-    types => [ qw(type2name type2fs name2type fs2type isExtended isExt2 isReiserfs isTrueFS isSwap isDos isWin isFat isSunOS isOtherAvailableFS isPrimary isNfs isSupermount isRAID isHFS isNT isMountableRW isApplePartMap isLoopback) ],
+    types => [ qw(type2name type2fs name2type fs2type isExtended isExt2 isReiserfs isTrueFS isSwap isDos isWin isFat isSunOS isOtherAvailableFS isPrimary isNfs isSupermount isRAID isMDRAID isHFS isNT isMountableRW isApplePartMap isLoopback) ],
 );
 @EXPORT_OK = map { @$_ } values %EXPORT_TAGS;
 
 
 use common qw(:common :system :functional);
-use partition_table_empty;
 use partition_table_raw;
-use partition_table_dos;
-use partition_table_bsd;
-use partition_table_sun;
-use partition_table_mac;
 use log;
 
 
@@ -214,6 +209,7 @@ sub name2type($) {
 sub isWholedisk($) { arch() =~ /^sparc/ && $_[0]{type} == 5 }
 sub isExtended($) { arch() !~ /^sparc/ && ($_[0]{type} == 5 || $_[0]{type} == 0xf || $_[0]{type} == 0x85) }
 sub isRAID($) { $_[0]{type} == 0xfd }
+sub isMDRAID { $_[0]{device} =~ /^md/ }
 sub isSwap($) { $type2fs{$_[0]{type}} eq 'swap' }
 sub isExt2($) { $type2fs{$_[0]{type}} eq 'ext2' }
 sub isReiserfs($) { $type2fs{$_[0]{type}} eq 'reiserfs' }
@@ -378,6 +374,7 @@ sub read_one($$) {
 	foreach ('empty', @parttype) {
 	    /unknown/ and die "unknown partition table format";
 	    eval {
+		require("partition_table_$_.pm");
 		bless $hd, "partition_table_$_";
 		($pt, $info) = $hd->read($sector);
 		log::l("found a $_ partition table on $hd->{file} at sector $sector");
diff --git a/perl-install/raid.pm b/perl-install/raid.pm
index 585f2565e..8bc4d858e 100644
--- a/perl-install/raid.pm
+++ b/perl-install/raid.pm
@@ -7,6 +7,7 @@ use strict;
 #- misc imports
 #-######################################################################################
 use common qw(:common :functional);
+use partition_table qw(:types);
 use run_program;
 use devices;
 use commands;
@@ -17,11 +18,6 @@ sub nb($) {
     first((ref $nb ? $nb->{device} : $nb) =~ /(\d+)/);
 }
 
-sub is($) {
-    my ($part) = @_;
-    $part->{device} =~ /^md/;
-}
-
 sub new($$) {
     my ($raid, $part) = @_;
     my $nb = @$raid; 
@@ -122,7 +118,7 @@ EOF
 
 sub make {
     my ($raid, $part) = @_;
-    is($_) and make($raid, $_) foreach @{$part->{disks}};
+    isMDRAID($_) and make($raid, $_) foreach @{$part->{disks}};
     my $dev = devices::make($part->{device});
     eval { commands::modprobe(module($part)) };
     run_program::run("raidstop", $dev);
diff --git a/update_kernel b/update_kernel
index 7d2057e29..11871d717 100755
--- a/update_kernel
+++ b/update_kernel
@@ -12,15 +12,16 @@ f "scsi disk" ; SCSI_DRIVERS=$v
 f "net" ; NETWORK_DRIVERS=$v
 f "scsi cdrom" ; CD_DRIVERS=$v
 f "pcmcia net_raw cdrom_raw scsi_raw disk_raw" ; PCMCIA_DRIVERS=$v
-f "pcmcia net cdrom scsi disk" ; ALL_DRIVERS=$v
-
+f "big net_raw cdrom_raw scsi_raw disk_raw" ; BIG_DRIVERS=$v
+f "pcmcia net cdrom scsi disk keepbig" ; ALL_DRIVERS=$v
 [ $ARCH == "i386" ] && FSMODULES="vfat.o fat.o"
 
 NETWORK_MODULES="$FSMODULES $NETWORK_DRIVERS"
 CDROM_MODULES="  $FSMODULES $CD_DRIVERS"
 HD_MODULES="     $FSMODULES $SCSI_DRIVERS loop.o isofs.o"
 PCMCIA_MODULES=" $FSMODULES $PCMCIA_DRIVERS"
-ALL_MODULES="    $FSMODULES $ALL_DRIVERS"
+BIG_MODULES="    $FSMODULES $BIG_DRIVERS"
+ALL_MODULES="    $FSMODULES $ALL_DRIVERS reiserfs.o"
 NOT_USEFULL_IN_STAGE1="nls_*.o parport_probe.o raid*.o serial.o smbfs.o usb-*.o"
 
 PCMCIA_INSTALLMODULES="pcmcia_core.o tcic.o ds.o i82365.o"
@@ -47,9 +48,10 @@ rm -rf modules ; install -d modules
     ls $CDROM_MODULES   | cpio --quiet -H crc -o | gzip -9 > cdrom_modules.cgz	
     ls $HD_MODULES      | cpio --quiet -H crc -o | gzip -9 > hd_modules.cgz     
     ls $PCMCIA_MODULES  | cpio --quiet -H crc -o | gzip -9 > pcmcia_modules.cgz
+    ls $BIG_MODULES     | cpio --quiet -H crc -o | gzip -9 > other_modules.cgz
     ls $ALL_MODULES     | cpio --quiet -H crc -o | gzip -9 > all_modules.cgz
 [ "$ARCH" == "i386" ] && {
     cp $PCMCIA_INSTALLMODULES ../install_pcmcia_modules/
 }
-    rm -f $NETWORK_MODULES $CDROM_MODULES $HD_MODULES $PCMCIA_MODULES $PCMCIA_INSTALLMODULES $NOT_USEFULL_IN_STAGE1 # leave in the directory non-install1 used modules
+    rm -f $ALL_MODULES $PCMCIA_INSTALLMODULES $NOT_USEFULL_IN_STAGE1 # leave in the directory non-install1 used modules
 )