summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorFrancois Pons <fpons@mandriva.com>2000-07-11 18:04:41 +0000
committerFrancois Pons <fpons@mandriva.com>2000-07-11 18:04:41 +0000
commitb54d78676ac459c8fb94bc6b43caa29d5764e9bd (patch)
tree9d2fd1d49dcec4b27904ee46a9ee507104a71e91
parent4c2fb3914a389afd7a79bbabea1dde6968448505 (diff)
downloaddrakx-b54d78676ac459c8fb94bc6b43caa29d5764e9bd.tar
drakx-b54d78676ac459c8fb94bc6b43caa29d5764e9bd.tar.gz
drakx-b54d78676ac459c8fb94bc6b43caa29d5764e9bd.tar.bz2
drakx-b54d78676ac459c8fb94bc6b43caa29d5764e9bd.tar.xz
drakx-b54d78676ac459c8fb94bc6b43caa29d5764e9bd.zip
*** empty log message ***
-rw-r--r--perl-install/ChangeLog9
-rw-r--r--perl-install/any.pm48
-rw-r--r--perl-install/bootloader.pm683
-rw-r--r--perl-install/install_any.pm22
-rw-r--r--perl-install/install_steps.pm45
-rw-r--r--perl-install/install_steps_interactive.pm147
-rw-r--r--perl-install/share/compssList21
-rw-r--r--perl-install/share/compssUsers68
8 files changed, 848 insertions, 195 deletions
diff --git a/perl-install/ChangeLog b/perl-install/ChangeLog
index 50126ab57..2144330f6 100644
--- a/perl-install/ChangeLog
+++ b/perl-install/ChangeLog
@@ -1,3 +1,12 @@
+2000-07-11 Fran�ois Pons <fpons@mandrakesoft.com>
+
+ * bootloader.pm: merged lilo.pm and silo.pm inside bootloader.pm,
+ this include a configure_entry from silo.pm to build a initrd if
+ used.
+ * share/compssList: added kde2 packages.
+ * share/compssUsers: added kde2 group, renamed kde to kde1 group
+ specific.
+
2000-07-07 Fran�ois Pons <fpons@mandrakesoft.com>
* install2.pm (choosePackages): always execute setPackage to copy
diff --git a/perl-install/any.pm b/perl-install/any.pm
index 9737b264f..23313c5f6 100644
--- a/perl-install/any.pm
+++ b/perl-install/any.pm
@@ -60,17 +60,24 @@ sub setupBootloader {
my @l = (__("First sector of drive (MBR)"), __("First sector of boot partition"));
$in->set_help('setupBootloaderBeginner') unless $::isStandalone;
- my $boot = $hds->[0]{device};
- my $onmbr = "/dev/$boot" eq $b->{boot};
- $b->{boot} = "/dev/" . ($in->ask_from_list_(_("LILO/grub Installation"),
- _("Where do you want to install the bootloader?"),
- \@l, $l[!$onmbr]) eq $l[0]
- ? $boot : fsedit::get_root($fstab, 'boot')->{device});
+ if (arch() =~ /sparc/) {
+ $b->{use_partition} = $in->ask_from_list_(_("SILO Installation"),
+ _("Where do you want to install the bootloader?"),
+ \@l, $l[$b->{use_partition}]);
+ } else {
+ my $boot = $hds->[0]{device};
+ my $onmbr = "/dev/$boot" eq $b->{boot};
+ $b->{boot} = "/dev/" . ($in->ask_from_list_(_("LILO/grub Installation"),
+ _("Where do you want to install the bootloader?"),
+ \@l, $l[!$onmbr]) eq $l[0]
+ ? $boot : fsedit::get_root($fstab, 'boot')->{device});
+ }
} elsif ($more || !$::beginner) {
- $in->set_help("setupBootloaderGeneral") unless $::isStandalone;
+ $in->set_help(arch() =~ /sparc/ ? "setupSILOGeneral" : "setupBootloaderGeneral") unless $::isStandalone; #- TO MERGE ?
if ($::expert) {
- my $m = $in->ask_from_list_('', _("Which bootloader(s) do you want to use?"), [ keys(%{$b->{methods}}), __("None") ], 'grub') or return;
+ my $default = arch() =~ /sparc/ ? 'silo' : 'grub';
+ my $m = $in->ask_from_list_('', _("Which bootloader(s) do you want to use?"), [ keys(%{$b->{methods}}), __("None") ], $default) or return;
$b->{methods}{$_} = 0 foreach keys %{$b->{methods}};
$b->{methods}{$m} = 1 if $m ne "None";
}
@@ -80,19 +87,25 @@ sub setupBootloader {
#- put lilo if grub is chosen, so that /etc/lilo.conf is generated
exists $b->{methods}{lilo} and $b->{methods}{lilo} = 1 if $b->{methods}{grub};
+ my @silo_install_lang = (_("First sector of drive (MBR)"), _("First sector of boot partition"));
+ my $silo_install_lang = $silo_install_lang[$b->{use_partition}];
my @l = (
+arch() =~ /sparc/ ? (
+_("Bootloader installation") => { val => \$silo_install_lang, list => \@silo_install_lang, not_edit => 1 },
+) : (
_("Boot device") => { val => \$b->{boot}, list => [ map { "/dev/$_" } (map { $_->{device} } @$hds, @$fstab), detect_devices::floppies() ], not_edit => !$::expert },
_("LBA (doesn't work on old BIOSes)") => { val => \$b->{lba32}, type => "bool", text => "lba" },
_("Compact") => { val => \$b->{compact}, type => "bool", text => _("compact") },
+_("Video mode") => { val => \$b->{vga}, list => [ keys %bootloader::vga_modes ], not_edit => $::beginner },
+),
_("Delay before booting default image") => \$b->{timeout},
-_("Video mode") => { val => \$b->{vga}, list => [ keys %lilo::vga_modes ], not_edit => $::beginner },
$security < 4 ? () : (
_("Password") => { val => \$b->{password}, hidden => 1 },
_("Password (again)") => { val => \$b->{password2}, hidden => 1 },
_("Restrict command line options") => { val => \$b->{restricted}, type => "bool", text => _("restrict") },
)
);
- @l = @l[0..3] unless $::expert;
+ @l = @l[0..3] unless $::expert; #- take "bootloader installation" and "delay before ..." on SPARC.
$b->{vga} ||= 'Normal';
$in->ask_from_entries_refH('', _("Bootloader main options"), \@l,
@@ -103,11 +116,12 @@ _("Restrict command line options") => { val => \$b->{restricted}, type => "bool"
0;
}
) or return 0;
- $b->{vga} = $lilo::vga_modes{$b->{vga}} || $b->{vga};
+ $b->{use_partition} = $silo_install_lang eq _("First sector of drive (MBR)") ? 0 : 1;
+ $b->{vga} = $bootloader::vga_modes{$b->{vga}} || $b->{vga};
}
until ($::beginner && $more <= 1) {
- $in->set_help('setupBootloaderAddEntry') unless $::isStandalone;
+ $in->set_help(arch() =~ /sparc/ ? 'setupSILOAddEntry' : 'setupBootloaderAddEntry') unless $::isStandalone;
my $c = $in->ask_from_list_([''],
_("Here are the different entries.
You can add some more or change the existing ones."),
@@ -120,12 +134,14 @@ You can add some more or change the existing ones."),
if ($c eq "Add") {
my @labels = map { $_->{label} } @{$b->{entries}};
my $prefix;
- if ($in->ask_from_list_('', _("Which type of entry do you want to add?"), [ __("Linux"), __("Other OS (windows...)") ]) eq "Linux") {
+ if ($in->ask_from_list_('', _("Which type of entry do you want to add?"),
+ [ __("Linux"), arch() =~ /sparc/ ? __("Other OS (SunOS...)") : __("Other OS (windows...)") ]
+ ) eq "Linux") {
$e = { type => 'image' };
$prefix = "linux";
} else {
$e = { type => 'other' };
- $prefix = "windows";
+ $prefix = arch() =~ /sparc/ ? "sunos" : "windows";
}
$e->{label} = $prefix;
for (my $nb = 0; member($e->{label}, @labels); $nb++) { $e->{label} = "$prefix-$nb" }
@@ -149,8 +165,10 @@ _("Read-write") => { val => \$e->{'read-write'}, type => 'bool' }
} else {
@l = (
_("Root") => { val => \$e->{kernel_or_dev}, list => [ map { "/dev/$_->{device}" } @$fstab ], not_edit => !$::expert },
+arch() !~ /sparc/ ? (
_("Table") => { val => \$e->{table}, list => [ '', map { "/dev/$_->{device}" } @$hds ], not_edit => !$::expert },
_("Unsafe") => { val => \$e->{unsafe}, type => 'bool' }
+) : (),
);
@l = @l[0..1] unless $::expert;
}
@@ -168,6 +186,8 @@ _("Default") => { val => \$default, type => 'bool' },
0;
})) {
$b->{default} = $old_default || $default ? $default && $e->{label} : $b->{default};
+ require bootloader;
+ bootloader::configure_entry($prefix, $e); #- hack to make sure initrd file are built.
push @{$b->{entries}}, $e if $c eq "Add";
} else {
diff --git a/perl-install/bootloader.pm b/perl-install/bootloader.pm
new file mode 100644
index 000000000..11f9d2ae3
--- /dev/null
+++ b/perl-install/bootloader.pm
@@ -0,0 +1,683 @@
+package bootloader;
+
+use diagnostics;
+use strict;
+use vars qw(%vga_modes);
+
+#-######################################################################################
+#- misc imports
+#-######################################################################################
+use common qw(:common :file :functional :system);
+use partition_table qw(:types);
+use log;
+use fsedit;
+use loopback;
+use commands;
+use detect_devices;
+use partition_table_raw;
+use run_program;
+use modules;
+
+
+%vga_modes = (
+ "Ask at boot" => 'ask',
+ "Normal" => 'normal',
+ "80x50" => '0x0f01',
+ "80x43" => '0x0f02',
+ "80x28" => '0x0f03',
+ "80x30" => '0x0f04',
+ "80x34" => '0x0f05',
+ "80x60" => '0x0f06',
+ "100x30" => '0x0122',
+);
+
+my %vga_modes2nb = (
+ 'ask' => -3,
+ 'normal' => -1,
+#- other entries are identity
+);
+
+
+#-#####################################################################################
+#- Functions
+#-#####################################################################################
+
+sub get {
+ my ($kernel, $bootloader) = @_;
+ $_->{kernel_or_dev} && $_->{kernel_or_dev} eq $kernel and return $_ foreach @{$bootloader->{entries}};
+ undef;
+}
+sub get_label {
+ my ($label, $bootloader) = @_;
+ $_->{label} && $_->{label} eq $label and return $_ foreach @{$bootloader->{entries}};
+ undef;
+}
+
+sub mkinitrd($$$) {
+ my ($prefix, $kernelVersion, $initrdImage) = @_;
+
+ $::testing || -e "$prefix/$initrdImage" and return;
+
+ my $loop_boot = loopback::prepare_boot($prefix);
+
+ modules::load('loop');
+ run_program::rooted($prefix, "mkinitrd", "-f", $initrdImage, "--ifneeded", $kernelVersion) or unlink("$prefix/$initrdImage");
+
+ loopback::save_boot($loop_boot);
+
+ -e "$prefix/$initrdImage" or die "mkinitrd failed";
+}
+
+sub mkbootdisk($$$;$) {
+ my ($prefix, $kernelVersion, $dev, $append) = @_;
+
+ modules::load_multi(arch() =~ /sparc/ ? 'romfs' : (), 'loop');
+ my @l = qw(mkbootdisk --noprompt);
+ push @l, "--appendargs", $append if $append;
+ push @l, "--bios", 0, if $dev !~ /fd/;
+ run_program::rooted($prefix, @l, "--device", "/dev/$dev", $kernelVersion) or die "mkbootdisk failed";
+}
+
+sub read($$) {
+ my ($prefix, $file) = @_;
+ my $global = 1;
+ my ($e, $v, $f);
+ my %b;
+ foreach (cat_("$prefix$file")) {
+ ($_, $v) = /^\s*(.*?)\s*(?:=\s*(.*?))?\s*$/;
+
+ if (/^(image|other)$/) {
+ push @{$b{entries}}, $e = { type => $_, kernel_or_dev => $v };
+ $global = 0;
+ } elsif ($global) {
+ $b{$_} = $v || 1;
+ } else {
+ if ((/map-drive/ .. /to/) && /to/) {
+ $e->{mapdrive}{$e->{'map-drive'}} = $v;
+ } else {
+ $e->{$_} = $v || 1;
+ }
+ }
+ }
+ delete $b{timeout} unless $b{prompt};
+ $_->{append} =~ s/^\s*"?(.*?)"?\s*$/$1/ foreach \%b, @{$b{entries}};
+ $b{timeout} = $b{timeout} / 10 if $b{timeout};
+ $b{message} = cat_("$prefix$b{message}") if $b{message};
+ \%b;
+}
+
+sub suggest_onmbr($) {
+ my ($hds) = @_;
+
+ my $type = partition_table_raw::typeOfMBR($hds->[0]{device});
+ !$type || member($type, qw(dos dummy lilo grub empty)), !$type;
+}
+
+sub add_entry($$) {
+ my ($entries, $v) = @_;
+ my (%usedold, $freeold);
+
+ do { $usedold{$1 || 0} = 1 if $_->{label} =~ /^old ([^_]*)_/x } foreach @$entries;
+ foreach (0..scalar keys %usedold) { exists $usedold{$_} or $freeold = $_ || '', last }
+
+ do { $_->{label} = "old${freeold}_$_->{label}" if $_->{label} eq $v->{label} } foreach @$entries;
+ push @$entries, $v;
+}
+
+sub add_kernel($$$$$) {
+ my ($prefix, $lilo, $kernelVersion, $specific, $v) = @_;
+ my $ext = $specific && "-$specific";
+ my ($vmlinuz, $image, $initrdImage) = ("vmlinuz-$kernelVersion$specific", "/boot/vmlinuz$ext", "/boot/initrd$ext.img");
+ -e "$prefix/boot/$vmlinuz" or log::l("unable to find kernel image $prefix/boot/$vmlinuz"), return;
+ {
+ my $f = "initrd-$kernelVersion$specific.img";
+ eval { mkinitrd($prefix, "$kernelVersion$specific", "/boot/$f") };
+ undef $initrdImage if $@;
+ symlinkf $f, "$prefix$initrdImage" or $initrdImage = "/boot/$f"
+ if $initrdImage;
+ }
+ symlinkf "$vmlinuz", "$prefix/$image" or $image = "/boot/$vmlinuz";
+ add2hash($v,
+ {
+ type => 'image',
+ label => 'linux',
+ kernel_or_dev => $image,
+ initrd => $initrdImage,
+ append => $lilo->{perImageAppend},
+ });
+ add_entry($lilo->{entries}, $v);
+ $v;
+}
+
+sub configure_entry($$) {
+ my ($prefix, $entry) = @_;
+ if ($entry->{type} eq 'image') {
+ my $specific_version;
+ $entry->{kernel_or_dev} =~ /vmlinu.-(.*)/ and $specific_version = $1;
+ readlink("$prefix/$entry->{kernel_or_dev}") =~ /vmlinu.-(.*)/ and $specific_version = $1;
+
+ if ($specific_version) {
+ $entry->{initrd} or $entry->{initrd} = "/boot/initrd-$specific_version.img";
+ unless (-e "$prefix/$entry->{initrd}") {
+ eval { mkinitrd($prefix, $specific_version, "$entry->{initrd}") };
+ undef $entry->{initrd} if $@;
+ }
+ }
+ }
+ $entry;
+}
+
+sub dev2prompath { #- SPARC only
+ my ($dev) = @_;
+ my ($wd, $num) = $dev =~ /^(.*\D)(\d*)$/;
+ require c;
+ $dev = c::disk2PromPath($wd) and $dev = $dev =~ /^sd\(/ ? "$dev$num" : "$dev;$num";
+ $dev;
+}
+
+sub suggest($$$$$) {
+ my ($prefix, $lilo, $hds, $fstab, $kernelVersion) = @_;
+ my $root_part = fsedit::get_root($fstab);
+ my $root = isLoopback($root_part) ? "loop7" : $root_part->{device};
+ my $boot = fsedit::get_root($fstab, 'boot')->{device};
+
+ require c; c::initSilo() if arch() =~ /sparc/;
+
+ my ($onmbr, $unsafe) = $lilo->{crushMbr} ? (1, 0) : suggest_onmbr($hds);
+ add2hash_($lilo, arch() =~ /sparc/ ?
+ {
+ default => "linux",
+ entries => [],
+ timeout => 5,
+ use_partition => 0, #- we should almost always have a whole disk partition.
+ root => "/dev/$root",
+ partition => $partition || 1,
+ boot => $root eq $boot && "/boot", #- this helps for getting default partition for silo.
+ } :
+ {
+ boot => "/dev/" . ($onmbr ? $hds->[0]{device} : fsedit::get_root($fstab, 'boot')->{device}),
+ bootUnsafe => $unsafe,
+ map => "/boot/map",
+ default => "linux",
+ lba32 => 1,
+ entries => [],
+ timeout => $onmbr && 5,
+ install => "/boot/boot.b",
+ });
+#- the following is not needed anymore with latest lilo
+#- $lilo->{disk} ||= "/dev/$hds->[0]{device} bios=0x80" if $hds->[0]{device} =~ /^hd[be]$/;
+
+ if (!$lilo->{message} || $lilo->{message} eq "1") {
+ $lilo->{message} = join('', cat_("$prefix/boot/message"));
+ if (!$lilo->{message}) {
+ my $msg_en =
+__("Welcome to %s the operating system chooser!
+
+To list the possible choices, press <TAB>.
+
+To load one of them, write its name and press <ENTER> or
+wait %d seconds for default boot.
+
+");
+ my $msg = translate($msg_en);
+ #- use the english version if more than 20% of 8bits chars
+ $msg = $msg_en if int(grep { $_ & 0x80 } unpack "c*", $msg) / length($msg) > 0.2;
+ $lilo->{message} = sprintf $msg, arch() =~ /sparc/ ? "SILO" : "LILO", $lilo->{timeout};
+ }
+ }
+
+ my $isSecure = -e "$prefix/boot/vmlinuz-${kernelVersion}secure";
+
+ my $isSMP = detect_devices::hasSMP();
+ if ($isSMP && !-e "$prefix/boot/vmlinuz-${kernelVersion}smp") {
+ log::l("SMP machine, but no SMP kernel found") unless $isSecure;
+ $isSMP = 0;
+ }
+ add_kernel($prefix, $lilo, $kernelVersion, $isSecure ? 'secure' : 'smp',
+ {
+ label => 'linux',
+ root => "/dev/$root",
+ }) if $isSecure || $isSMP;
+ add_kernel($prefix, $lilo, $kernelVersion, '',
+ {
+ label => $isSecure || $isSMP ? 'linux-up' : 'linux',
+ root => "/dev/$root",
+ });
+ add_kernel($prefix, $lilo, $kernelVersion, '',
+ {
+ label => 'failsafe',
+ root => "/dev/$root",
+ })->{append} .= " failsafe" unless $lilo->{password};
+
+ if (arch() =~ /sparc/) {
+ #- search for SunOS, it could be a really better approach to take into account
+ #- partition type for mounting point.
+ my $sunos = 0;
+ foreach (@$hds) {
+ foreach (@{$_->{primary}{normal}}) {
+ my $path = $_->{device} =~ m|^/| && $_->{device} !~ m|^/dev/| ? $_->{device} : dev2prompath($_->{device});
+ add_entry($lilo->{entries},
+ {
+ type => 'other',
+ kernel_or_dev => $path,
+ label => "sunos" . ($sunos++ ? $sunos : ''),
+ }) if $path && isSunOS($_) && type2name($_->{type}) =~ /root/i;
+ }
+ }
+ } else {
+ #- search for dos (or windows) boot partition. Don't look in extended partitions!
+ my ($dos, $win) = 0, 0;
+ foreach (@$hds) {
+ foreach (@{$_->{primary}{normal}}) {
+ add_entry($lilo->{entries},
+ {
+ type => 'other',
+ kernel_or_dev => "/dev/$_->{device}",
+ label => isDos($_) ? "dos" . ($dos++ ? $dos : '') : "windows" . ($win++ ? $win : '') ,
+ table => "/dev/$_->{rootDevice}",
+ }) if isFat($_) && isFat({ type => fsedit::typeOfPart($_->{device}) });
+ }
+ }
+ }
+ my %l = (
+ silo => bool(arch() =~ /sparc/),
+ lilo => bool(arch() !~ /sparc/) && !isLoopback(fsedit::get_root($fstab)),
+ grub => bool(arch() !~ /sparc/) && !$::o->{lnx4win}, #1,#!isReiserfs(fsedit::get_root($fstab, 'boot')),
+ loadlin => bool(arch() !~ /sparc/) && -e "/initrd/loopfs/lnx4win",
+ );
+ $lilo->{methods} ||= { map { $_ => 1 } grep { $l{$_} } keys %l };
+}
+
+sub suggest_floppy {
+ my ($bootloader) = @_;
+
+ add_entry($bootloader->{entries},
+ {
+ type => 'other',
+ kernel_or_dev => '/dev/fd0',
+ label => 'floppy',
+ unsafe => 1
+ });
+}
+
+sub keytable($$) {
+ my ($prefix, $f) = @_;
+ local $_ = $f;
+ if ($_ && !/\.klt$/) {
+ $f = "/boot/$_.klt";
+ run_program::rooted($prefix, "keytab-lilo.pl", ">", $f, $_) or undef $f;
+ }
+ $f && -r "$prefix/$f" && $f;
+}
+
+sub install_silo($$$) {
+ my ($prefix, $silo, $fstab) = @_;
+ my $boot = fsedit::get_root($fstab, 'boot')->{device};
+ my ($wd, $num) = $boot =~ /^(.*\D)(\d*)$/;
+
+ #- setup boot promvars for.
+ require c;
+ if ($boot =~ /^md/) {
+ #- get all mbr devices according to /boot are listed,
+ #- then join all zero based partition translated to prom with ';'.
+ #- keep bootdev with the first of above.
+ log::l("/boot is present on raid partition which is not currently supported for promvars");
+ } else {
+ if (!$silo->{use_partition}) {
+ foreach (@$fstab) {
+ if (!$_->{start} && $_->{device} =~ /$wd/) {
+ $boot = $_->{device};
+ log::l("found a zero based partition in $wd as $boot");
+ last;
+ }
+ }
+ }
+ $silo->{bootalias} = c::disk2PromPath($boot);
+ $silo->{bootdev} = $silo->{bootalias};
+ log::l("preparing promvars for device=$boot");
+ }
+ c::hasAliases() or log::l("clearing promvars alias as non supported"), $silo->{bootalias} = '';
+
+ if ($silo->{message}) {
+ local *F;
+ open F, ">$prefix/boot/message" and print F $silo->{message} or $silo->{message} = 0;
+ }
+ {
+ local *F;
+ local $\ = "\n";
+ my $f = "$prefix/boot/silo.conf"; #- always write the silo.conf file in /boot ...
+ symlinkf "../boot/silo.conf", "$prefix/etc/silo.conf"; #- ... and make a symlink from /etc.
+ open F, ">$f" or die "cannot create silo config file: $f";
+ log::l("writing silo config to $f");
+
+ $silo->{$_} and print F "$_=$silo->{$_}" foreach qw(partition root default append);
+ $silo->{$_} and print F $_ foreach qw(restricted);
+ #- print F "password=", $silo->{password} if $silo->{restricted} && $silo->{password}; #- done by msec
+ print F "timeout=", round(10 * $silo->{timeout}) if $silo->{timeout};
+ print F "message=$silo->{boot}/message" if $silo->{message};
+
+ foreach (@{$silo->{entries}}) {#my ($v, $e) = each %{$silo->{entries}}) {
+ my $type = "$_->{type}=$_->{kernel_or_dev}"; $type =~ s|/boot|$silo->{boot}|;
+ print F $type;
+ print F "\tlabel=$_->{label}";
+
+ if ($_->{type} eq "image") {
+ my $initrd = $_->{initrd}; $initrd =~ s|/boot|$silo->{boot}|;
+ print F "\tpartition=$_->{partition}" if $_->{partition};
+ print F "\troot=$_->{root}" if $_->{root};
+ print F "\tinitrd=$initrd" if $_->{initrd};
+ print F "\tappend=\"$1\"" if $_->{append} =~ /^\s*"?(.*?)"?\s*$/;
+ print F "\tread-write" if $_->{'read-write'};
+ print F "\tread-only" if !$_->{'read-write'};
+ }
+ }
+ }
+ log::l("Installing boot loader...");
+ $::testing and return;
+ run_program::rooted($prefix, "silo", "2>", "/tmp/.error", $silo->{use_partition} ? ("-t") : ()) or
+ run_program::rooted($prefix, "silo", "2>", "/tmp/.error", "-p", "2", $silo->{use_partition} ? ("-t") : ()) or
+ die "silo failed";
+ unlink "$prefix/tmp/.error";
+
+ #- try writing in the prom.
+ log::l("setting promvars alias=$silo->{bootalias} bootdev=$silo->{bootdev}");
+ require c;
+ c::setPromVars($silo->{bootalias}, $silo->{bootdev});
+}
+
+sub install_lilo($$) {
+ my ($prefix, $lilo) = @_;
+ $lilo->{prompt} = $lilo->{timeout};
+
+ if ($lilo->{message}) {
+ local *F;
+ open F, ">$prefix/boot/message" and print F $lilo->{message} or $lilo->{message} = 0;
+ }
+ {
+ local *F;
+ local $\ = "\n";
+ my $f = "$prefix/etc/lilo.conf";
+ open F, ">$f" or die "cannot create lilo config file: $f";
+ log::l("writing lilo config to $f");
+
+ $lilo->{$_} and print F "$_=$lilo->{$_}" foreach qw(boot map install vga default append keytable disk);
+ $lilo->{$_} and print F $_ foreach qw(linear lba32 compact prompt restricted);
+ #- print F "password=", $lilo->{password} if $lilo->{restricted} && $lilo->{password}; #- done by msec
+ print F "timeout=", round(10 * $lilo->{timeout}) if $lilo->{timeout};
+ print F "message=/boot/message" if $lilo->{message};
+
+ foreach (@{$lilo->{entries}}) {
+ print F "$_->{type}=$_->{kernel_or_dev}";
+ print F "\tlabel=", substr($_->{label}, 0, 15); #- lilo doesn't handle more than 15 char long labels
+
+ if ($_->{type} eq "image") {
+ print F "\troot=$_->{root}";
+ print F "\tinitrd=$_->{initrd}" if $_->{initrd};
+ print F "\tappend=\"$_->{append}\"" if $_->{append};
+ print F "\tvga=$_->{vga}" if $_->{vga};
+ print F "\tread-write" if $_->{'read-write'};
+ print F "\tread-only" if !$_->{'read-write'};
+ } else {
+ print F "\ttable=$_->{table}" if $_->{table};
+ print F "\tunsafe" if $_->{unsafe} && !$_->{table};
+
+ #- boot off the second drive, so reverse the BIOS maps
+ $_->{mapdrive} ||= { '0x80' => '0x81', '0x81' => '0x80' }
+ if $_->{table} && $lilo->{boot} !~ /$_->{table}/;
+
+ while (my ($from, $to) = each %{$_->{mapdrive} || {}}) {
+ print F "\tmap-drive=$from";
+ print F "\t to=$to";
+ }
+ }
+ }
+ }
+ log::l("Installing boot loader...");
+ $::testing and return;
+ run_program::rooted($prefix, "lilo", "2>", "/tmp/.error") or die "lilo failed";
+ unlink "$prefix/tmp/.error";
+}
+
+sub dev2bios {
+ my ($hds, $where) = @_;
+ my @dev = map { $_->{device} } @$hds;
+ member($where, @dev) or ($where) = @dev; #- if not on mbr,
+
+ s/h(d[e-g])/x$1/ foreach $where, @dev; #- emulates ultra66 as xd_
+
+ my $start = substr($where, 0, 2);
+
+ my $translate = sub {
+ $_ eq $where ? "aaa" : #- if exact match, value it first
+ /^$start(.*)/ ? "ad$1" : #- if same class (ide/scsi/ultra66), value it before other classes
+ $_;
+ };
+ @dev = map { $_->[0] }
+ sort { $a->[1] cmp $b->[1] }
+ map { [ $_, &$translate ] } @dev;
+
+ s/x(d.)/h$1/ foreach @dev; #- switch back;
+
+ (map_index { $_ => "fd$::i" } detect_devices::floppies()),
+ (map_index { $_ => "hd$::i" } @dev);
+}
+
+sub dev2grub {
+ my ($dev, $dev2bios) = @_;
+ $dev =~ m|^(/dev/)?(...)(.*)$| or die "dev2grub";
+ my $grub = $dev2bios->{$2} or die "dev2grub ($2)";
+ "($grub" . ($3 && "," . ($3 - 1)) . ")";
+}
+
+sub install_grub {
+ my ($prefix, $lilo, $fstab, $hds) = @_;
+ my %dev2bios = dev2bios($hds, $lilo->{boot});
+
+ {
+ my %bios2dev = reverse %dev2bios;
+ output "$prefix/boot/grub/device.map",
+ join '', map { "($_) /dev/$bios2dev{$_}\n" } sort keys %bios2dev;
+ }
+ my $file2grub = sub {
+ my $file = expand_symlinks "$prefix$_[0]";
+ if (!isReiserfs(fsedit::get_root($fstab, 'boot'))) { #- grub in reiserfs doesn't handle symlinks.
+ if (my $l = readlink "$prefix$_[0]") {
+ $l =~ m|/| or $file =~ s/\Q$l/basename $_[0]/e; #- keep simple end symlinks
+ }
+ }
+ unless ($file =~ s/^$prefix//) {
+ my ($fs) = grep { loopback::carryRootLoopback($_) } @$fstab or die;
+ log::l("found $fs->{mntpoint}");
+ $file =~ s|/initrd/loopfs|$fs->{mntpoint}|;
+ }
+ my ($fs);
+ foreach (@$fstab) {
+ my $m = $_->{mntpoint};
+ $fs = $_ if
+ $file =~ /^$m/ &&
+ (!$fs || length $fs->{mntpoint} < length $m);
+ }
+ $fs or die "file2grub not found $file";
+ $file =~ s|$fs->{mntpoint}/?|/|;
+ dev2grub($fs->{device}, \%dev2bios) . $file;
+ };
+ {
+ local *F;
+ local $\ = "\n";
+ my $f = "$prefix/boot/grub/menu.lst";
+ open F, ">$f" or die "cannot create grub config file: $f";
+ log::l("writing grub config to $f");
+
+ $lilo->{$_} and print F "$_ $lilo->{$_}" foreach qw(timeout);
+
+ print F "color black/cyan yellow/cyan";
+ print F "i18n ", $file2grub->("/boot/grub/messages");
+ print F "keytable ", $file2grub->($lilo->{keytable}) if $lilo->{keytable};
+
+ map_index {
+ print F "default $::i" if $_->{label} eq $lilo->{default};
+ } @{$lilo->{entries}};
+
+ foreach (@{$lilo->{entries}}) {
+ print F "\ntitle $_->{label}";
+
+ if ($_->{type} eq "image") {
+ my $vga = $_->{vga} || $lilo->{vga};
+ printf F "kernel %s root=%s %s%s%s\n",
+ $file2grub->($_->{kernel_or_dev}),
+ $_->{root} =~ /loop7/ ? "707" : $_->{root}, #- special to workaround bug in kernel (see #ifdef CONFIG_BLK_DEV_LOOP)
+ $_->{append},
+ $_->{'read-write'} && " rw",
+ $vga && $vga ne "normal" && " vga=$vga";
+ print F "initrd ", $file2grub->($_->{initrd}) if $_->{initrd};
+ } else {
+ print F "root ", dev2grub($_->{kernel_or_dev}, \%dev2bios);
+ if ($_->{kernel_or_dev} !~ /fd/) {
+ #- boot off the second drive, so reverse the BIOS maps
+ $_->{mapdrive} ||= { '0x80' => '0x81', '0x81' => '0x80' }
+ if $_->{table} && $lilo->{boot} !~ /$_->{table}/;
+
+ map_each { print F "map ($::b) ($::a)" } %{$_->{mapdrive} || {}};
+
+ print F "makeactive";
+ }
+ print F "chainloader +1";
+ }
+ }
+ }
+ my $fd = first(detect_devices::floppies());
+ my $hd = fsedit::get_root($fstab, 'boot')->{rootDevice};
+
+ my $dev = dev2grub($lilo->{boot}, \%dev2bios);
+ my ($s1, $s2, $m) = map { $file2grub->("/boot/grub/$_") } qw(stage1 stage2 menu.lst);
+ my $f = "/boot/grub/install.sh";
+ output "$prefix$f",
+"grub --device-map=/boot/grub/device.map --batch <<EOF
+install $s1 d $dev $s2 p $m
+quit
+EOF
+";
+
+ output "$prefix/boot/grub/messages", map { translate($_) . "\n" } (
+__("Welcome to GRUB the operating system chooser!"),
+__("Use the %c and %c keys for selecting which entry is highlighted."),
+__("Press enter to boot the selected OS, \'e\' to edit the"),
+__("commands before booting, or \'c\' for a command-line."),
+__("The highlighted entry will be booted automatically in %d seconds."),
+);
+
+ my $e = "$prefix/boot/.enough_space";
+ output $e, 1; -s $e or die _("not enough room in /boot");
+ unlink $e;
+
+ log::l("Installing boot loader...");
+ $::testing and return;
+ symlink "$prefix/boot", "/boot";
+ run_program::run("sh", $f) or die "grub installation failed";
+ unlink "$prefix/tmp/.error.grub", "/boot";
+}
+
+sub lnx4win_file {
+ my $lilo = shift;
+ map { local $_ = $_; s,/,\\,g; "$lilo->{boot_drive}:\\lnx4win$_" } @_;
+}
+
+sub loadlin_cmd {
+ my ($prefix, $lilo) = @_;
+ my $e = get_label("linux", $lilo) || first(grep { $_->{type} eq "image" } @{$lilo->{entries}});
+
+ commands::cp("$prefix$e->{kernel_or_dev}", "$prefix/boot/vmlinuz") unless -e "$prefix/boot/vmlinuz";
+ commands::cp("$prefix$e->{initrd}", "$prefix/boot/initrd.img") unless -e "$prefix/boot/initrd.img";
+
+ $e->{label}, sprintf"%s %s initrd=%s root=%s $e->{append}",
+ lnx4win_file($lilo, "/loadlin.exe", "/boot/vmlinuz", "/boot/initrd.img"),
+ $e->{root} =~ /loop7/ ? "0707" : $e->{root}; #- special to workaround bug in kernel (see #ifdef CONFIG_BLK_DEV_LOOP)
+}
+
+sub install_loadlin {
+ my ($prefix, $lilo, $fstab) = @_;
+
+ my $boot;
+ ($boot) = grep { $lilo->{boot} eq "/dev/$_->{device}" } @$fstab;
+ ($boot) = grep { loopback::carryRootLoopback($_) } @$fstab unless $boot && $boot->{device_windobe};
+ ($boot) = grep { isFat($_) } @$fstab unless $boot && $boot->{device_windobe};
+ log::l("loadlin device is $boot->{device} (windobe $boot->{device_windobe})");
+ $lilo->{boot_drive} = $boot->{device_windobe};
+
+ my ($winpart) = grep { $_->{device_windobe} eq 'C' } @$fstab;
+ log::l("winpart is $winpart->{device}");
+ my $winhandle = loopback::inspect($winpart, $prefix, 'rw');
+ my $windrive = $winhandle->{dir};
+ log::l("windrive is $windrive");
+
+ my $config_sys = "$windrive/config.sys";
+ local $_ = cat_($config_sys);
+ output "$windrive/config.mdk", $_ if $_;
+
+ my $timeout = $lilo->{timeout} || 1;
+ my ($label, $cmd) = loadlin_cmd($prefix, $lilo);
+
+ $_ = "
+[Menu]
+menuitem=Windows
+menudefault=Windows,$timeout
+
+[Windows]
+" . $_ if !/^\Q[Menu]/m;
+
+ #- remove existing entry
+ s/^menuitem=$label\s*//mi;
+ s/\n\[$label\].*?(\n\[|$)/$1/si;
+
+ #- add entry
+ s/(.*\nmenuitem=[^\n]*)/$1\nmenuitem=$label/s;
+
+ $_ .= "
+[$label]
+shell=$cmd
+";
+ output $config_sys, unix2dos($_);
+ output "/initrd/loopfs/lnx4win/linux.bat", unix2dos(
+'@echo off
+echo Linux Mandrake
+smartdrv /C
+' . "$cmd\n");
+
+ my $windir = lc(cat_("$windrive/msdos.sys") =~ /^WinDir=.:\\(\S+)/m ? $1 : "windows");
+
+#-PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
+ foreach (__("Desktop"), __("Start Menu")) {
+ my $d = "$windrive/$windir/" . translate($_);
+ -d $d or $d = "$windrive/$windir/$_";
+ -d $d or log::l("can't find windows $d directory"), next;
+ output "$d/Linux4Win.url", unix2dos(sprintf
+q([InternetShortcut]
+URL=file:\lnx4win\lnx4win.exe
+WorkingDirectory=%s
+IconFile=%s
+IconIndex=0
+), lnx4win_file($lilo, "/", "/lnx4win.ico"));
+ }
+
+}
+
+sub install {
+ my ($prefix, $lilo, $fstab, $hds) = @_;
+
+ $lilo->{keytable} = keytable($prefix, $lilo->{keytable});
+
+ my %l = grep_each { $::b } %{$lilo->{methods}};
+ my @rcs = map {
+ my $f = $bootloader::{"install_$_"} or die "unknown bootloader method $_";
+ eval { $f->(@_) };
+ $@;
+ } reverse sort keys %l; #- reverse sort for having grub installed after lilo if both are there.
+
+ return if grep { !$_ } @rcs; #- at least one worked?
+ die first(map { $_ } @rcs);
+}
+
+#-######################################################################################
+#- Wonderful perl :(
+#-######################################################################################
+1; #
diff --git a/perl-install/install_any.pm b/perl-install/install_any.pm
index 5909636f7..73680fb12 100644
--- a/perl-install/install_any.pm
+++ b/perl-install/install_any.pm
@@ -533,30 +533,30 @@ sub setupFB {
$vga ||= 785; #- assume at least 640x480x16.
- require lilo;
- #- update lilo entries with a new fb label. a bit hack unless
+ require bootloader;
+ #- update bootloader entries with a new fb label. a bit hack unless
#- a frame buffer kernel is used, in such case we use it instead
#- with the right mode, nothing more to do.
foreach (qw(secure smp)) {
- if (my $e = lilo::get("/boot/vmlinuz-$_", $o->{bootloader})) {
+ if (my $e = bootloader::get("/boot/vmlinuz-$_", $o->{bootloader})) {
if ($_ eq 'secure') {
log::l("warning: kernel-secure is not fb, using a kernel-fb instead");
#- nothing done, fall through linux-fb.
} else {
$e->{vga} = $vga;
- lilo::install($o->{prefix}, $o->{bootloader}, $o->{fstab}, $o->{hds});
+ bootloader::install($o->{prefix}, $o->{bootloader}, $o->{fstab}, $o->{hds});
return 1;
}
}
}
- if (lilo::add_kernel($o->{prefix}, $o->{bootloader}, kernelVersion($o), 'fb',
- {
- label => 'linux-fb',
- root => lilo::get("/boot/vmlinuz", $o->{bootloader})->{root},
- vga => $vga,
- })) {
+ if (bootloader::add_kernel($o->{prefix}, $o->{bootloader}, kernelVersion($o), 'fb',
+ {
+ label => 'linux-fb',
+ root => bootloader::get("/boot/vmlinuz", $o->{bootloader})->{root},
+ vga => $vga,
+ })) {
$o->{bootloader}{default} = 'linux-fb';
- lilo::install($o->{prefix}, $o->{bootloader}, $o->{fstab}, $o->{hds});
+ bootloader::install($o->{prefix}, $o->{bootloader}, $o->{fstab}, $o->{hds});
} else {
log::l("unable to install kernel with frame buffer support, disabling");
return 0;
diff --git a/perl-install/install_steps.pm b/perl-install/install_steps.pm
index 99d338c89..6e1d2f28f 100644
--- a/perl-install/install_steps.pm
+++ b/perl-install/install_steps.pm
@@ -749,13 +749,8 @@ sub createBootdisk($) {
return if $::testing;
- if (arch() =~ /^sparc/) {
- require silo;
- silo::mkbootdisk($o->{prefix}, install_any::kernelVersion($o), $dev, $o->{bootloader}{perImageAppend});
- } else {
- require lilo;
- lilo::mkbootdisk($o->{prefix}, install_any::kernelVersion($o), $dev, $o->{bootloader}{perImageAppend});
- }
+ require bootloader;
+ bootloader::mkbootdisk($o->{prefix}, install_any::kernelVersion($o), $dev, $o->{bootloader}{perImageAppend});
$o->{mkbootdisk} = $dev;
}
@@ -764,13 +759,8 @@ sub readBootloaderConfigBeforeInstall {
my ($o) = @_;
my ($image, $v);
- if (arch() =~ /^sparc/) {
- require silo;
- add2hash($o->{bootloader} ||= {}, silo::read($o->{prefix}, "/etc/silo.conf"));
- } else {
- require lilo;
- add2hash($o->{bootloader} ||= {}, lilo::read($o->{prefix}, "/etc/lilo.conf"));
- }
+ require bootloader;
+ add2hash($o->{bootloader} ||= {}, bootloader::read($o->{prefix}, arch() =~ /sparc/ ? "/etc/silo.conf" : "/etc/lilo.conf"));
#- since kernel or kernel-smp may not be upgraded, it should be checked
#- if there is a need to update existing lilo.conf entries by using that
@@ -788,13 +778,8 @@ sub readBootloaderConfigBeforeInstall {
if (-e "$o->{prefix}$v") {
my $e;
- if (arch() =~ /sparc/) {
- require silo;
- $e = silo::get("/boot/$image", $o->{bootloader});
- } else {
- require lilo;
- $e = lilo::get("/boot/$image", $o->{bootloader});
- }
+ require bootloader;
+ $e = bootloader::get("/boot/$image", $o->{bootloader});
$e or next;
$e->{kernel_or_dev} = $v;
@@ -812,19 +797,15 @@ sub setupBootloaderBefore {
$o->{bootloader}{root} ||= "/dev/$dev->{device}";
$o->{bootloader}{part_nb} ||= first($dev->{device} =~ /(\d+)/);
}
- } elsif (arch() =~ /^sparc/) {
- require silo;
- silo::init();
- silo::suggest($o->{prefix}, $o->{bootloader}, $o->{hds}, $o->{fstab}, install_any::kernelVersion($o));
} else {
- require lilo;
- lilo::suggest($o->{prefix}, $o->{bootloader}, $o->{hds}, $o->{fstab}, install_any::kernelVersion($o));
+ require bootloader;
+ bootloader::suggest($o->{prefix}, $o->{bootloader}, $o->{hds}, $o->{fstab}, install_any::kernelVersion($o));
if ($o->{miscellaneous}{profiles}) {
- my $e = lilo::get_label("linux", $o->{bootloader});
+ my $e = bootloader::get_label("linux", $o->{bootloader});
push @{$o->{bootloader}{entries}}, { %$e, label => "office", append => "$e->{append} prof=Office" };
$e->{append} .= " prof=Home";
}
- lilo::suggest_floppy($o->{bootloader}) if $o->{security} <= 3;
+ bootloader::suggest_floppy($o->{bootloader}) if $o->{security} <= 3;
$o->{bootloader}{keytable} ||= keyboard::keyboard2kmap($o->{keyboard});
}
}
@@ -856,11 +837,9 @@ sub setupBootloader($) {
# output "$o->{prefix}/etc/aboot.conf",
# map_index { "$::i:$b->{part_nb}$_ root=$b->{root} $b->{perImageAppend}\n" }
# map { /$o->{prefix}(.*)/ } eval { glob_("$o->{prefix}/boot/vmlinux*") };
- } elsif (arch() =~ /^sparc/) {
- silo::set_promvars($o->{fstab}, $o->{bootloader});
- silo::install($o->{prefix}, $o->{bootloader});
} else {
- lilo::install($o->{prefix}, $o->{bootloader}, $o->{fstab}, $o->{hds});
+ require bootloader;
+ bootloader::install($o->{prefix}, $o->{bootloader}, $o->{fstab}, $o->{hds});
}
}
diff --git a/perl-install/install_steps_interactive.pm b/perl-install/install_steps_interactive.pm
index 4e288b1ba..1307ae8b6 100644
--- a/perl-install/install_steps_interactive.pm
+++ b/perl-install/install_steps_interactive.pm
@@ -804,138 +804,6 @@ failures. Would you like to create a bootdisk for your system?"),
}
#------------------------------------------------------------------------------
-sub setupLILO {
- my ($o, $more) = @_;
- $o->{lnx4win} or any::setupBootloader($o, $o->{bootloader}, $o->{hds}, $o->{fstab}, $o->{security}, $o->{prefix}, $more) or return;
-
- eval { $o->SUPER::setupBootloader };
- if ($@) {
- $o->ask_warn('',
- [ _("Installation of LILO failed. The following error occured:"),
- grep { !/^Warning:/ } cat_("$o->{prefix}/tmp/.error") ]);
- unlink "$o->{prefix}/tmp/.error";
- die "already displayed";
- }
-}
-
-#------------------------------------------------------------------------------
-sub setupSILO {
- my ($o, $more) = @_;
- my $b = $o->{bootloader};
-
- if ($::beginner && $more >= 1) {
- my @silo_install = (__("First sector of drive (MBR)"), __("First sector of boot partition"));
- $o->set_help('setupBootloaderBeginner') unless $::isStandalone; #- no problem of translation for this one.
- $b->{use_partition} = $o->ask_from_list_(_("SILO Installation"),
- _("Where do you want to install the bootloader?"),
- \@silo_install, $silo_install[$b->{use_partition}]);
- } elsif ($more || !$::beginner) {
- $o->set_help("setupSILOGeneral");
-
- $::expert and $o->ask_yesorno('', _("Do you want to use SILO?"), 1) || return;
-
- my @silo_install_lang = (_("First sector of drive (MBR)"), _("First sector of boot partition"));
- my $silo_install_lang = $silo_install_lang[$b->{use_partition}];
- my @l = (
-_("Bootloader installation") => { val => \$silo_install_lang, list => \@silo_install_lang, not_edit => 1 },
-_("Delay before booting default image") => \$b->{timeout},
-$o->{security} < 4 ? () : (
-_("Password") => { val => \$b->{password}, hidden => 1 },
-_("Password (again)") => { val => \$b->{password2}, hidden => 1 },
-_("Restrict command line options") => { val => \$b->{restricted}, type => "bool", text => _("restrict") },
-)
- );
-
- $o->ask_from_entries_refH('', _("SILO main options"), \@l,
- complete => sub {
-#- $o->{security} > 4 && length($b->{password}) < 6 and $o->ask_warn('', _("At this level of security, a password (and a good one) in silo is requested")), return 1;
- $b->{restricted} && !$b->{password} and $o->ask_warn('', _("Option ``Restrict command line options'' is of no use without a password")), return 1;
- $b->{password} eq $b->{password2} or !$b->{restricted} or $o->ask_warn('', [ _("The passwords do not match"), _("Please try again") ]), return 1;
- 0;
- }
- ) or return;
- $b->{use_partition} = $silo_install_lang eq _("First sector of drive (MBR)") ? 0 : 1;
- }
-
- until ($::beginner && $more <= 1) {
- $o->set_help('setupSILOAddEntry');
- my $c = $o->ask_from_list_([''],
-_("Here are the following entries in SILO.
-You can add some more or change the existing ones."),
- [ (sort @{[map { "$_->{label} ($_->{kernel_or_dev})" . ($b->{default} eq $_->{label} && " *") } @{$b->{entries}}]}), __("Add"), __("Done") ],
- );
- $c eq "Done" and last;
-
- my ($e);
-
- if ($c eq "Add") {
- my @labels = map { $_->{label} } @{$b->{entries}};
- my $prefix;
- if ($o->ask_from_list_('', _("Which type of entry do you want to add?"), [ __("Linux"), __("Other OS (SunOS...)") ]) eq "Linux") {
- $e = { type => 'image' };
- $prefix = "linux";
- } else {
- $e = { type => 'other' };
- $prefix = "sunos";
- }
-
- $e->{label} = $prefix;
- for (my $nb = 0; member($e->{label}, @labels); $nb++) { $e->{label} = "$prefix-$nb" }
- } else {
- $c =~ /(\S+)/;
- ($e) = grep { $_->{label} eq $1 } @{$b->{entries}};
- }
- my %old_e = %$e;
- my $default = my $old_default = $e->{label} eq $b->{default};
-
- my @l;
- if ($e->{type} eq "image") {
- @l = (
-_("Image") => { val => \$e->{kernel_or_dev}, list => [ eval { map { s/$o->{prefix}//; $_ } glob_("$o->{prefix}/boot/vmlinuz*") } ] },
-_("Partition") => { val => \$e->{partition}, list => [ map { ("$o->{prefix}/dev/$_->{device}" =~ /\D*(\d*)/)[0] || 1} @{$o->{fstab}} ], not_edit => !$::expert },
-_("Root") => { val => \$e->{root}, list => [ map { "/dev/$_->{device}" } @{$o->{fstab}} ], not_edit => !$::expert },
-_("Append") => \$e->{append},
-_("Initrd") => { val => \$e->{initrd}, list => [ eval { map { s/$o->{prefix}//; $_ } glob_("$o->{prefix}/boot/initrd*") } ] },
-_("Read-write") => { val => \$e->{'read-write'}, type => 'bool' }
- );
- @l = @l[0..7] unless $::expert;
- } else {
- @l = (
-_("Root") => { val => \$e->{kernel_or_dev}, list => [ map { "/dev/$_->{device}" } @{$o->{fstab}} ], not_edit => !$::expert },
- );
- }
- @l = (
-_("Label") => \$e->{label},
-@l,
-_("Default") => { val => \$default, type => 'bool' },
- );
-
- if ($o->ask_from_entries_refH($c eq "Add" ? '' : ['', _("Ok"), _("Remove entry")],
- '', \@l,
- complete => sub {
- $e->{label} or $o->ask_warn('', _("Empty label not allowed")), return 1;
- member($e->{label}, map { $_->{label} } grep { $_ != $e } @{$b->{entries}}) and $o->ask_warn('', _("This label is already in use")), return 1;
- 0;
- })) {
- $b->{default} = $old_default || $default ? $default && $e->{label} : $b->{default};
- require silo;
- silo::configure_entry($o->{prefix}, $e);
- $c eq 'Add' and push @{$b->{entries}}, $e;
- } else {
- @{$b->{entries}} = grep { $_ != $e } @{$b->{entries}};
- }
- }
- eval { $o->SUPER::setupBootloader };
- if ($@) {
- $o->ask_warn('',
- [ _("Installation of SILO failed. The following error occured:"),
- grep { !/^Warning:/ } cat_("$o->{prefix}/tmp/.error") ]);
- unlink "$o->{prefix}/tmp/.error";
- die "already displayed";
- }
-}
-
-#------------------------------------------------------------------------------
sub setupBootloaderBefore {
my ($o) = @_;
my $w = $o->wait_message('', _("Preparing bootloader"));
@@ -944,7 +812,7 @@ sub setupBootloaderBefore {
#------------------------------------------------------------------------------
sub setupBootloader {
- my ($o) = @_;
+ my ($o, $more) = @_;
if (arch() =~ /^alpha/) {
$o->ask_yesorno('', _("Do you want to use aboot?"), 1) or return;
catch_cdie { $o->SUPER::setupBootloader } sub {
@@ -952,10 +820,17 @@ sub setupBootloader {
_("Error installing aboot,
try to force installation even if that destroys the first partition?"));
};
- } elsif (arch() =~ /^sparc/) {
- &setupSILO;
} else {
- &setupLILO;
+ $o->{lnx4win} or any::setupBootloader($o, $o->{bootloader}, $o->{hds}, $o->{fstab}, $o->{security}, $o->{prefix}, $more) or return;
+
+ eval { $o->SUPER::setupBootloader };
+ if ($@) {
+ $o->ask_warn('',
+ [ _("Installation of bootloader failed. The following error occured:"),
+ grep { !/^Warning:/ } cat_("$o->{prefix}/tmp/.error") ]);
+ unlink "$o->{prefix}/tmp/.error";
+ die "already displayed";
+ }
}
}
diff --git a/perl-install/share/compssList b/perl-install/share/compssList
index 06f898ef4..d7f8b5ece 100644
--- a/perl-install/share/compssList
+++ b/perl-install/share/compssList
@@ -520,25 +520,43 @@ kcmclock 0 0 0
kcmkdesu 80 0 70
kcmlaptop 32 0 20
kdbg 15 0 27
+kde2and1scripts 79 40 68
kde-doc-translation-fr -12 -20 -16
kde-themes 72 0 60
kde-themes-extra 24 0 24
kdeadmin 72 0 60
+kdeadmin2 72 0 60
kdebase 79 40 68
+kdebase2 79 40 68
kdegames 71 0 59
+kdegames2 71 0 59
kdegraphics 77 40 66
+kdegraphics2 77 40 66
kdelibs 0 0 0
+kdelibs2 0 0 0
kdelibs-devel 1 1 60
+kdelibs2-devel 1 1 60
+kdelibs2-sound 77 40 66
+kdelibs2-sound-devel 1 1 60
kdemultimedia 77 0 66
+kdemultimedia2 77 0 66
kdenetwork 72 0 60
+kdenetwork2 72 0 60
+kdepim2 72 0 60
+kdesdk2 72 0 60
kdesu 72 0 60
kdesupport 0 0 0
+kdesupport2 0 0 0
kdesupport-devel 0 0 15
+kdesupport2-devel 0 0 15
kdetoys 70 0 65
+kdetoys2 70 0 65
kdeutils 78 0 67
+kdeutils2 78 0 67
kdevelop 16 0 27
kdiff 72 0 60
kdiskcat 72 0 60
+kdoc2 72 0 60
kdpms 72 0 60
kernel 99 99 99
kernel-doc 5 50 65
@@ -567,6 +585,7 @@ kjumpingcube 70 0 65
kless 72 0 60
klilo 72 0 60
klyx 50 0 58
+klyx2 50 0 58
kmag 72 0 60
kmemmon 72 0 60
kmodbox 72 0 60
@@ -576,6 +595,7 @@ kmp3te 72 0 60
kmpg 72 0 60
knetload 72 0 60
knewmail 72 0 60
+koffice2 50 0 58
kon2 -12 -60 -15
korganizer 72 0 60
kover 72 0 60
@@ -599,6 +619,7 @@ kudzu 97 0 97
kudzu-devel 0 0 80
kuickshow 71 0 59
kvideogen 73 0 56
+kvirc2 72 0 56
kvoice 73 0 56
kvoicecontrol 73 0 56
kweather 72 0 59
diff --git a/perl-install/share/compssUsers b/perl-install/share/compssUsers
index 8688a34b6..ed516b534 100644
--- a/perl-install/share/compssUsers
+++ b/perl-install/share/compssUsers
@@ -1,12 +1,78 @@
Graphics Manipulation
Graphics
-KDE
+KDE 1
Graphical desktop/KDE
+XFree86
+XFree86-75dpi-fonts
+fonts-ttf-west_european
+KDE 2
+ +kde2and1scripts
+ +kdeadmin2
+ +kdebase2
+ +kdebase2-crypto
+ +kdegames2
+ +kdegraphics2
+ +kde-i18n2-Afrikaans
+ +kde-i18n2-Basque
+ +kde-i18n2-Brazil
+ +kde-i18n2-Breton
+ +kde-i18n2-British
+ +kde-i18n2-Bulgarian
+ +kde-i18n2-Catalan
+ +kde-i18n2-Chinese
+ +kde-i18n2-Croatian
+ +kde-i18n2-Czech
+ +kde-i18n2-Danish
+ +kde-i18n2-Dutch
+ +kde-i18n2-Esperanto
+ +kde-i18n2-Finnish
+ +kde-i18n2-French
+ +kde-i18n2-German
+ +kde-i18n2-Greek
+ +kde-i18n2-Hebrew
+ +kde-i18n2-Hungarian
+ +kde-i18n2-Italian
+ +kde-i18n2-Japanese
+ +kde-i18n2-Korean
+ +kde-i18n2-Lithuanian
+ +kde-i18n2-Macedonian
+ +kde-i18n2-Maori
+ +kde-i18n2-Norwegian
+ +kde-i18n2-Norwegian-Nynorsk
+ +kde-i18n2-Polish
+ +kde-i18n2-Portuguese
+ +kde-i18n2-Romanian
+ +kde-i18n2-Russian
+ +kde-i18n2-Serbian
+ +kde-i18n2-Slovak
+ +kde-i18n2-Slovenian
+ +kde-i18n2-Spanish
+ +kde-i18n2-Swedish
+ +kde-i18n2-Tamil
+ +kde-i18n2-Thai
+ +kde-i18n2-Turkish
+ +kde-i18n2-Ukrainian
+ +kde-i18n2-Walloon
+ +kdelibs2
+ +kdelibs2-crypto
+ +kdelibs2-devel
+ +kdelibs2-sound
+ +kdelibs2-sound-devel
+ +kdemultimedia2
+ +kdenetwork2
+ +kdepim2
+ +kdesdk2
+ +kdesupport2
+ +kdesupport2-devel
+ +kdetoys2
+ +kdeutils2
+ +kdoc2
+ +klyx2
+ +koffice2
+ +kvirc2
+
Gnome
Graphical desktop/GNOME
Graphical desktop/Sawmill