package network::connection::cellular_card; use base qw(network::connection::cellular); use strict; use common; my $wrong_pin_error = N_("Wrong PIN number format: it should be 4 digits."); sub get_type_name() { N("GPRS/Edge/3G") } sub _get_type_icon() { 'cellular' } sub get_devices() { require detect_devices; my @maybe_usbserial_modules = ('usbserial_generic', 'unknown'); my @serial = grep { $_->{description} =~ /GPRS|EDGE|3G|UMTS|H.DPA|CDMA/i } detect_devices::matching_driver('serial_cs', 'usbserial', @maybe_usbserial_modules); member($_->{driver}, @maybe_usbserial_modules) and $_->{driver} = 'usbserial' foreach @serial; #- cdc_acm can not be listed directly in network/cellular, it is already in network/isdn @serial, detect_devices::probe_category('network/cellular'), detect_devices::matching_driver('cdc_acm'); } sub get_metric { 40 } sub get_packages { 'comgt', 'ppp' } sub handles_ifcfg { my ($_class, $ifcfg) = @_; exists $ifcfg->{CELLULAR_CID}; } my @thirdparty_settings = ( { name => 'nozomi', description => 'Option GlobeTrotter 3G/EDGE and FUSION+', url => 'http://www.pharscape.org/', kernel_module => 1, }, { name => 'hso', description => 'Option High Speed Mobile Devices', url => 'http://www.pharscape.org/', kernel_module => 1, tools => { package => 'hso-rezero', test_file => '/usr/sbin/rezero', }, }, ); sub get_thirdparty_settings() { \@thirdparty_settings; } sub guess_hardware_settings { my ($self) = @_; $self->{hardware}{pin} ||= chomp_(cat_("/etc/sysconfig/network-scripts/pin-" . $self->get_interface)); } sub get_interface { my ($self) = @_; $self->get_driver eq "hso" ? "hso0" : "ppp0"; } sub get_tty_device { my ($self) = @_; $self->{device}{device} ? "/dev/" . $self->{device}{device} : $self->get_driver eq "nozomi" ? "/dev/noz0" : $self->get_driver eq "cdc_acm" ? "/dev/ttyACM0" : $self->get_driver eq "hso" ? "/dev/ttyHS0" : "/dev/ttyUSB0"; } sub get_control_device { my ($self) = @_; my $tty_device = $self->get_tty_device; if ($tty_device eq "/dev/ttyUSB0") { for my $id (2, 1) { my $usb_control_device = "/dev/ttyUSB" . $id; return $usb_control_device if -e $usb_control_device; } } $tty_device; } sub network_scan_is_slow() { 1 } sub check_hardware_is_slow() { 1 } sub has_unique_network() { 1 } sub get_networks { my ($self) = @_; my $cmd = 'comgt -d ' . $self->get_control_device; my ($network, $state) = `$cmd reg` =~ /^Registered on \w+ network: "(.*)",(\d+)$/m; my ($strength) = `$cmd sig` =~ /^Signal Quality:\s+(\d+),\d+$/; $self->probed_networks; $self->{networks} = $network && { $network => { name => $network, signal_strength => $strength * 5, current => $state == 2, } }; } sub get_hardware_settings { my ($self) = @_; [ { label => N("PIN number"), val => \$self->{hardware}{pin}, hidden => 1 } ]; } sub check_hardware_settings { my ($self) = @_; if ($self->{hardware}{pin} !~ /^[0-9]{4}$/) { $self->{hardware}{error} = translate($wrong_pin_error); return 0; } 1; } sub get_peer_default_options { my ($self) = @_; $self->SUPER::get_peer_default_options, "noccp", # disable CCP to avoid warning messages "debug"; } sub build_peer { my ($self) = @_; $self->SUPER::build_peer; #- don't run comgt for now, it hangs on ttyUSB0 devices when run from pppd #- $self->{access}{peer}->{init} = "comgt -d $dev < $pin_file" } sub set_ppp_settings { my ($self) = @_; $self->{access}{no_dial} = $self->get_driver eq "hso"; $self->{access}{cid} = 3; $self->{access}{at_commands} = [ "AT+CPIN?", # Set +CGEE to 2 "AT+CMEE=2", qq(AT+CGDCONT=$self->{access}{cid},"IP","$self->{access}{apn}"), # Setup +CGEQREG (QoS, don't set it for now) # qq(AT+CGEQREQ=3,3,64,384,0,0,2,0,"0E0","0E0",3,0,0), # Attached to network, will return 1 "AT+CGATT?", if_($self->get_driver eq "hso", ""), ]; $self->SUPER::set_ppp_settings; } sub write_settings { my ($self) = @_; my $interface = $self->get_interface; my $pin_file = "/etc/sysconfig/network-scripts/pin-$interface"; output_with_perm($pin_file, 0600, $self->{hardware}{pin} . "\n"); $self->SUPER::write_settings; } sub prepare_device { my ($self) = @_; my $driver = $self->get_driver; require modules; my $modules_conf = ref($::o) && $::o->{modules_conf} || modules::any_conf->read; modules::load_and_configure($modules_conf, $driver, if_($driver eq 'usbserial', join( ' ', "vendor=0x" . sprintf("%04x", $self->{device}{vendor}), "product=0x" . sprintf("%04x", $self->{device}{id})))); $modules_conf->write if !ref $::o; sleep 2 if $driver eq 'usbserial'; } sub check_device { my ($self) = @_; my $dev = $self->get_tty_device; if (! -e $dev) { $self->{device}{error} = N("Unable to open device %s", $dev); return; } 1; } sub check_hardware { my ($self) = @_; to_bool(run_program::rooted($::prefix, 'comgt', '>', '/dev/null', '-d', $self->get_control_device, 'PIN')); } sub configure_hardware { my ($self) = @_; my $device_ready = 0; require IPC::Open2; require IO::Select; require c; use POSIX qw(:errno_h); my $pid = IPC::Open2::open2(my $cmd_out, my $cmd_in, 'comgt', '-d', $self->get_control_device); common::nonblock($cmd_out); my $selector = IO::Select->new($cmd_out); my $already_entered_pin; while ($selector->can_read) { local $_; my $rv = sysread($cmd_out, $_, 512); $rv == 0 and $selector->remove($cmd_out); if (/^\s*\*\*\*SIM ERROR\*\*\*/m) { $self->{hardware}{error} = N("Please check that your SIM card is inserted."); last; } elsif (/^Enter PIN number:/m) { $self->{hardware}{pin} or last; if ($already_entered_pin) { $self->{hardware}{error} = translate($wrong_pin_error); last; } $already_entered_pin = 1; print $cmd_in $self->{hardware}{pin} . "\n"; } elsif (/^ERROR entering PIN/m) { $self->{hardware}{error} = N("You entered a wrong PIN code. Entering the wrong PIN code multiple times may lock your SIM card!"); last; } elsif (/^Waiting for Registration/m) { #- the card seems to be reset if comgt is killed right here, wait a bit sleep 1; #- don't wait the full scan $device_ready = 1; last; } } kill 'TERM', $pid; close($cmd_out); close($cmd_in); waitpid($pid, 0); $device_ready; } 1;