#!/usr/bin/perl # # author Guillaume Cottenceau (gc@mandrakesoft.com) # modified by Florin Grad (florin@mandrakesoft.com) # wizardified by Olivier Blin (oblin@mandriva.com) # # Copyright 2000-2006 Mandriva # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License version 2, as # published by the Free Software Foundation. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # use strict; use lib qw(/usr/lib/libDrakX); # i18n: IMPORTANT: to get correct namespace (drakx-net instead of libDrakX) BEGIN { unshift @::textdomains, 'drakx-net' } use standalone; #- warning, standalone must be loaded very first, for 'explanations' use common; use detect_devices; use interactive; use network::network; use network::connection::ethernet; use run_program; use log; use c; use network::shorewall; use network::dhcpd; use network::squid; use services; my $sysconf_network = "/etc/sysconfig/network"; my $masq_file = "$::prefix/etc/shorewall/masq"; my $cups_conf = "$::prefix/etc/cups/cupsd.conf"; my $in = 'interactive'->vnew('su'); my $net = {}; network::network::read_net_conf($net); my $modules_conf = modules::any_conf->read; my %eth_intf = map { $_->[0] => join(': ', $_->[0], $_->[2]) } network::connection::ethernet::get_eth_cards($modules_conf); my $shorewall = network::shorewall::read(); my $choice; my $gw_enabled; my ($lan_interface_name, $lan_intf, $internal_domain_name); my $use_dhcpd = 1; my $use_caching_dns = 1; my $use_caching_proxy = 1; my $resolv_conf = network::network::read_resolv_conf_raw(); my $squid_conf = network::squid::read_squid_conf(); my $dhcpd_conf = network::dhcpd::read_dhcpd_conf(); require wizards; my $wiz = wizards->new( { defaultimage => "drakgw", name => N("Internet Connection Sharing"), pages => { welcome => { name => N("You are about to configure your computer to share its Internet connection. With that feature, other computers on your local network will be able to use this computer's Internet connection. Make sure you have configured your Network/Internet access using drakconnect before going any further. Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN)."), post => sub { $gw_enabled = !$shorewall->{disabled} && grep { !/^#/ } cat_($masq_file); return $gw_enabled ? "ask_reconfigure" : "choose_net_interface"; }, }, ask_reconfigure => { name => sub { $gw_enabled ? N("The setup of Internet Connection Sharing has already been done. It's currently enabled. What would you like to do?") : N("The setup of Internet connection sharing has already been done. It's currently disabled. What would you like to do?"); #- FIXME : not used for now }, data => sub { [ { type => "list", val => \$choice, list => [ ($gw_enabled ? N_("Disable") : N_("Enable")), N_("Reconfigure") ], format => \&translate } ]; }, post => sub { if ($choice eq "Enable") { #- FIXME, not used for now #- gw_enable(); return "end_enabled"; } elsif ($choice eq "Disable") { gw_disable(); return "end_disabled"; } elsif ($choice eq "Reconfigure") { return "choose_net_interface"; } }, }, choose_net_interface => { pre => sub { $shorewall->{masq}{net_interface} = network::tools::get_default_gateway_interface($net); }, name => N("Please select the network interface directly connected to the internet."), data => [ { label => N("Net Device"), val => \$shorewall->{masq}{net_interface}, list => [ sort keys %{$net->{ifcfg}} ], format => sub { network::tools::get_interface_description($net, $_[0]) } } ], post => sub { network::shorewall::add_interface_to_net_zone($shorewall, $shorewall->{masq}{net_interface}); my $locals = @{$shorewall->{loc_zone}}; if ($locals == 0) { return "end_no_lan_interface"; } elsif ($locals == 1) { $lan_interface_name = $shorewall->{loc_zone}[0]; return "one_lan_interface"; } else { return "choose_lan_interface"; } }, }, one_lan_interface => { name => sub { N("There is only one configured network adapter on your system: %s I am about to setup your Local Area Network with that adapter.", format_interfaces($lan_interface_name)); }, next => "lan_configure", }, choose_lan_interface => { name => N("Please choose what network adapter will be connected to your Local Area Network."), data => sub { [ { type => "list", val => \$lan_interface_name, list => $shorewall->{loc_zone}, format => \&format_interfaces } ]; }, post => sub { log::explanations("Choosing network device: $lan_interface_name"); "lan_configure"; }, }, lan_configure => { pre => sub { $lan_intf = $net->{ifcfg}{$lan_interface_name} ||= {}; $lan_intf->{DEVICE} = $lan_interface_name; $lan_intf->{ONBOOT} = 'yes'; $lan_intf->{BOOTPROTO} = 'static'; $lan_intf->{IPADDR} ||= "192.168.1.1"; $lan_intf->{NETMASK} ||= "255.255.255.0"; $internal_domain_name = $resolv_conf->{search}[0] ||= "homeland.net"; }, name => N("Local Area Network settings"), data => sub { [ { label => N("Local IP address"), val => \$lan_intf->{IPADDR} }, { label => N("Netmask"), val => \$lan_intf->{NETMASK} }, { label => N("The internal domain name"), val => \$internal_domain_name }, ]; }, complete => sub { network::network::update_broadcast_and_network($lan_intf); if (my $conflict = find { $_->{NETWORK} eq $lan_intf->{NETWORK} } grep { $_->{DEVICE} ne $lan_intf->{DEVICE} } values %{$net->{ifcfg}}) { $in->ask_warn(N("Error"), N("Potential LAN address conflict found in current config of %s!\n", $conflict->{DEVICE})); return 1; } 0; }, post => sub { network::network::configure_network($net, $in, $modules_conf) unless $::testing; return "dns"; }, }, dns => { pre => sub { $dhcpd_conf->{domain_name_servers}[0] = $resolv_conf->{nameserver}[0] ||= $lan_intf->{IPADDR}; }, name => N("Domain Name Server (DNS) configuration"), data => sub { my @disable = (disabled => sub { $use_caching_dns }); [ { text => N("Use this gateway as domain name server"), val => \$use_caching_dns, type => 'bool' }, { label => N("The DNS Server IP"), val => \$dhcpd_conf->{domain_name_servers}[0], @disable }, ]; }, complete => sub { !$use_caching_dns || $::testing and return 0; #- install a caching name server if the specified DNS is the gateway !$in->do_pkgs->ensure_is_installed('bind', '/usr/sbin/named'); }, post => sub { services::set_status($_, $use_caching_dns) foreach qw(named); return "dhcpd"; }, }, dhcpd => { pre => sub { #- not editable $dhcpd_conf->{option_routers}[0] = $lan_intf->{IPADDR}; $dhcpd_conf->{subnet_mask}[0] = $lan_intf->{NETMASK}; $dhcpd_conf->{domain_name}[0] = $internal_domain_name; #- editable $dhcpd_conf->{dynamic_bootp}[0] ||= "16"; $dhcpd_conf->{dynamic_bootp}[1] ||= "253"; $dhcpd_conf->{default_lease_time}[0] ||= "21600"; $dhcpd_conf->{max_lease_time}[0] ||= "43200"; }, name => N("DHCP Server Configuration. Here you can select different options for the DHCP server configuration. If you do not know the meaning of an option, simply leave it as it is."), data => sub { my @advanced_disable = (advanced => 1, disabled => sub { !$use_dhcpd }); [ { text => N("Use automatic configuration (DHCP)"), val => \$use_dhcpd, type => 'bool' }, { label => N("The DHCP start range"), val => \$dhcpd_conf->{dynamic_bootp}[0], @advanced_disable }, { label => N("The DHCP end range"), val => \$dhcpd_conf->{dynamic_bootp}[1], @advanced_disable }, { label => N("The default lease (in seconds)"), val => \$dhcpd_conf->{default_lease_time}[0], @advanced_disable }, { label => N("The maximum lease (in seconds)"), val => \$dhcpd_conf->{max_lease_time}[0], @advanced_disable } ]; }, complete => sub { !$use_dhcpd || $::testing and return 0; $in->do_pkgs->ensure_is_installed('dhcp-server', '/usr/sbin/dhcpd') or return 1; 0; }, post => sub { network::dhcpd::write_dhcpd_conf($dhcpd_conf, $lan_intf->{DEVICE}) if $use_dhcpd; services::set_status("dhcpd", $use_dhcpd); return "proxy"; } }, proxy => { pre => sub { $squid_conf->{http_port}[0] ||= "3128"; $squid_conf->{cache_size}[1] ||= "100"; $squid_conf->{admin_mail}[0] ||= 'admin@mydomain.com'; $squid_conf->{visible_hostname}[0] ||= 'myfirewall@mydomain.com'; }, name => N("Proxy caching server (SQUID)"), data => sub { my @disable = (advanced => 1, disabled => sub { !$use_caching_proxy }); [ { text => N("Use this gateway as proxy caching server"), val => \$use_caching_proxy, type => 'bool' }, { label => N("Admin mail"), val => \$squid_conf->{admin_mail}[0], @disable }, { label => N("Visible hostname"), val => \$squid_conf->{visible_hostname}[0], @disable }, { label => N("Proxy port"), val => \$squid_conf->{http_port}[0], advanced => 1, @disable }, { label => N("Cache size (MB)"), val => \$squid_conf->{cache_size}[1], advanced => 1, @disable }, ]; }, complete => sub { !$use_caching_proxy || $::testing and return 0; $in->do_pkgs->ensure_is_installed('squid', '/usr/sbin/squid') or return 1; 0; }, post => sub { network::squid::write_squid_conf($squid_conf, $lan_intf, $internal_domain_name) if $use_caching_proxy; services::set_status("squid", $use_caching_proxy); if ($use_caching_proxy) { set_proxy_port($squid_conf->{http_port}[0]); } else { delete_proxy_ports(); } -f $cups_conf ? "cups" : end_step(); }, }, cups => { name => N("Broadcast printer information"), type => "yesorno", default => "yes", post => sub { update_cups() unless $::testing; end_step(); }, }, end_no_lan_interface => { name => N("No ethernet network adapter has been detected on your system. Please run the hardware configuration tool."), end => 1, }, end_enabled => { name => N("Internet Connection Sharing is now enabled."), end => 1, }, end_disabled => { name => N("Internet Connection Sharing is now disabled."), end => 1, }, end => { name => N("Everything has been configured. You may now share Internet connection with other computers on your Local Area Network, using automatic network configuration (DHCP) and a Transparent Proxy Cache server (SQUID)."), end => 1, }, }, }); $wiz->safe_process($in); sub format_interfaces { my ($interface) = @_; $eth_intf{$interface} || $interface; } sub end_step() { gw_configure(); log::l("[drakgw] Installation complete, exiting"); "end"; } sub delete_proxy_ports() { my $r = $shorewall->{redirects}{tcp}; my @ports = grep { $r->{$_} eq 'www' } keys %$r; delete $r->{$_} foreach @ports; } sub set_proxy_port { my ($port) = @_; $shorewall->{redirects}{tcp}{$port} = 'www'; } sub gw_disable() { my $_wait_disabl = $in->wait_message(N("Please wait"), N("Disabling servers...")); return if $::testing; services::set_status($_, 0) foreach qw(dhcpd squid named); delete_proxy_ports(); network::shorewall::write($shorewall); foreach ($network::dhcpd::dhcpd_conf_file, $network::squid::squid_conf_file, $masq_file) { if (-f $_) { rename($_, "$_.drakgwdisable") or die "Could not rename $_ to $_.drakgwdisable" } } services::restart("shorewall"); } sub gw_configure() { #- test for potential conflict with previous firewall config if (network::shorewall::check_iptables()) { $in->ask_warn(N("Firewalling configuration detected!"), N("Warning! An existing firewalling configuration has been detected. You may need some manual fixes after installation.")); } $in->do_pkgs->ensure_is_installed('shorewall', '/sbin/shorewall') or $in->exit(-1); my $_wait_configuring = $in->wait_message(N("Configuring..."), N("Configuring firewall...")); $shorewall->{disabled} = 0; $shorewall->{masq}{subnet} = "$lan_intf->{NETWORK}/$lan_intf->{NETMASK}"; network::shorewall::write($shorewall); #- be sure that FORWARD_IPV4 is enabled in /etc/sysconfig/network log::explanations("Enabling IPV4 forwarding"); substInFile { s/^FORWARD_IPV4.*\n//; $_ .= "FORWARD_IPV4=true\n" if eof } $sysconf_network if !$::testing; services::restart("network"); } sub update_cups() { #- Set up /etc/cups/cupsd.conf to make the broadcasting of the printer info #- working correctly: #- #- 1. ServerName <server's IP address> # because clients do necessarily #- # know the server's name #- #- 2. BrowseAddress <server's Broadcast IP> # broadcast printer info into #- # the local network. #- #- 3. BrowseOrder Deny,Allow #- BrowseDeny All #- BrowseAllow <IP mask for local net> # Only accept broadcast signals #- # coming from local network #- #- 4. <Location /> #- Order Deny,Allow #- Deny From All #- Allow From <IP mask for local net> # Allow only machines of local #- </Location> # network to access the server #- #- These steps are only done when the CUPS package is installed. #- Modify the root location block in /etc/cups/cupsd.conf log::explanations("Updating CUPS configuration accordingly"); substInFile { s/^ServerName[^:].*\n//; $_ .= "ServerName $lan_intf->{IPADDR}\n" if eof; s/^BrowseAddress.*\n//; $_ .= "BrowseAddress $lan_intf->{BROADCAST}\n" if eof; s/^BrowseOrder.*\n//; $_ .= "BrowseOrder Deny,Allow\n" if eof; s/^BrowseDeny.*\n//; $_ .= "BrowseDeny All\n" if eof; s/^BrowseAllow.*\n//; $_ .= "BrowseAllow \@IF($lan_interface_name)\n" if eof; } $cups_conf; my @cups_conf_content = cat_($cups_conf); my @root_location; my $root_location_start; my $root_location_end; # Cut out the root location block so that it can be treated seperately # without affecting the rest of the file if (any { m|^\s*<Location\s+/\s*>| } @cups_conf_content) { $root_location_start = -1; $root_location_end = -1; # Go through all the lines, bail out when start and end line found for (my $i = 0; $i < @cups_conf_content && $root_location_end == -1; $i++) { if ($cups_conf_content[$i] =~ m|^\s*<\s*Location\s+/\s*>|) { $root_location_start = $i; } elsif ($cups_conf_content[$i] =~ m|^\s*<\s*/Location\s*>| && $root_location_start != -1) { $root_location_end = $i; } } # Rip out the block and store it seperately @root_location = splice(@cups_conf_content, $root_location_start, $root_location_end - $root_location_start + 1); } else { # If there is no root location block, create one $root_location_start = @cups_conf_content; @root_location = ("<Location />\n", "</Location>\n"); } # Delete all former "Order", "Allow", and "Deny" lines from the root location block s/^\s*Order.*//, s/^\s*Allow.*//, s/^\s*Deny.*// foreach @root_location; # Add the new "Order" and "Deny" lines, add an "Allow" line for the local network splice(@root_location, -1, 0, $_) foreach "Order Deny,Allow\n", "Deny From All\n", "Allow From 127.0.0.1\n", "Allow From \@IF($lan_interface_name)\n"; # Put the changed root location block back into the file splice(@cups_conf_content, $root_location_start, 0, @root_location); output $cups_conf, @cups_conf_content; }