DrakX, l'assistente all'installazione di Mageia

Che tu sia un nuovo utente GNU-Linux o un esperto, l'installer di Mageia è studiato per rendere la tua installazione o aggiornamento il più semplice possibile.

The initial menu screen has various options, however the default one will start the installer, which will normally be all that you will need.

Per la prima schermata è possibile impostare qualche preferenza personale:

Questo è la schermata di benvenuto di default quando si usa un'installazione CD Wired Network-based (immagini Boot.iso o Boot-Nonfree.iso:

It does not allow to change the language, the available options are described in the screen. For more information about using a Wired Network-based Installation CD, see the Mageia Wiki

[Avvertimento]

La mappatura della tastiera è quella americana.

I passi dell'installazione

The install process is divided into a number of steps, which can be followed on the side panel of the screen.

Each step has one or more screens which may also have Advanced buttons with extra, less commonly required, options.

Molte schermate hanno un bottone di Aiuto per darti ulteriori spiegazioni riguardo lo step corrente.

[Nota]

If somewhere during install you decide to stop the installation, it is possible to reboot, but please think twice before you do this. Once a partition has been formatted or updates have started to be installed, your computer is no longer in the same state and rebooting it could very well leave you with an unusable system. If in spite of this you are very sure rebooting is what you want, go to a text terminal by pressing the three keys Alt Ctrl F2 at the same time. After that, press Alt Ctrl Delete simultaneously to reboot.

Problemi relativi all'installazione e soluzioni possibili

Nessuna interfaccia grafica

  • After the initial screen you did not reach the language selection screen. This can happen with some graphic cards and older systems. Try using low resolution by typing vgalo at the prompt.

  • If the hardware is very old, a graphical installation may not be possible. In this case it is worth trying a text mode installation. To use this hit ESC at the first welcome screen and confirm with ENTER. You will be presented with a black screen with the word "boot:". Type "text" and hit ENTER. Now continue with the installation in text mode.

L'installazione si blocca

If the system appeared to freeze during the installation, this may be a problem with hardware detection. In this case the automatic detection of hardware may be bypassed and dealt with later. To try this, type noauto at the prompt. This option may also be combined with other options as necessary.

Problema relativo alla RAM

These will rarely be needed, but in some cases the hardware may report the available RAM incorrectly. To specify this manually, you can use the mem=xxxM parameter, where xxx is the correct amount of RAM. e.g. mem=256M would specify 256MB of RAM.

Partizioni dinamiche

If you converted your hard disk from "basic" format to "dynamic" format on Microsoft Windows, you must know that it is impossible to install Mageia on this disc. To go back to a basic disk, see the Microsoft documentation: http://msdn.microsoft.com/en-us/library/cc776315.aspx.