Grub2 on Legacy MBR/GPT systems

• GRUB2 (with or without graphical menu) will be used exclusively as the bootloader for a Legacy/MBR or Legacy/GPT system.

• By default, a new bootloader will be written into either the MBR (Master Boot Record) of your first hard drive or in the BIOS boot partition.

Grub2-efi na UEFI systémech

• GRUB2-efi or rEFInd may be used as the bootloader for a UEFI system.

• By default, a new bootloader (Grub2-efi) will be written into the ESP (EFI System Partition).

  If there are already UEFI-based operating systems installed on your computer (Windows 8 for example), the Mageia installer will detect the existing ESP created by Windows and add grub2-efi to it. If no ESP exists, then one will be created. Although it is possible to have several ESPs, only one is required, whatever the number of operating systems you have.

rEFInd na UEFI systémech

• rEFInd has a nice graphical set of options, and can auto-detect installed EFI bootloaders. See: http://www.rodsbooks.com/refind/

• Bootloader to use

  • GRUB2 (with either a graphical or a text menu), can be chosen for both Legacy MBR/BIOS systems and UEFI systems.

  • rEFInd (with a graphical menu) is an alternative option solely for use with UEFI systems.

• Boot device

  	Don't change this unless you really know what you are doing.

  	There is no option to write GRUB to the boot sector of a partition (e.g: sda1), as this method is considered unreliable.

  When using UEFI mode, then the Boot device will be listed as EFI System Partition.

• Prodleva před spuštěním výchozího obrazu

  This text box lets you set a delay, in seconds, before the default operating system is started up.

• Zabezpečení

  This allows you to set a password for the bootloader. This means a username and password will be required when booting in order to select a booting entry or change settings. This is optional, and most people are not likely to have a need for it. The username is root and the password is the one chosen hereafter.

• Heslo

  Choose a password for the bootloader (optional)

• Heslo (znovu)

  Retype the password and DrakX will check that it matches with the one set above

• Povolit ACPI

  ACPI (Advanced Configuration and Power Interface) is a standard for power management. It can save energy by stopping unused devices. Deselecting it could be useful if, for example, your computer does not support ACPI or if you think the ACPI implementation might cause some problems (for instance random reboots or system lockups).

• Povolit SMP

  This option enables/disables symmetric multiprocessing for multi-core processors

• Povolit APIC

  Enabling this gives the operating system access to the Advanced Programmable Interrupt Controller. APIC devices permit more complex priority models, and Advanced IRQ (Interrupt Request) management.

• Povolit lokální APIC

  Here you can set Local APIC, which manages all external interrupts for a specific processor in an SMP system

• Install or update rEFInd in the EFI system partition.

• Install in /EFI/BOOT.

  This option installs the bootloader in the /EFI/BOOT directory of the ESP (EFI System Partition). This can be useful when:

  (a) Installing onto a removable drive (e.g. a USB stick) that can be removed and plugged into a different machine. If the bootloader is stored in /EFI/BOOT, UEFI BIOS's will detect it and allow you to boot from that drive.

  (b) As a workaround where, due to a buggy UEFI BIOS, the newly written bootloader for Mageia will not be recognized at end of the installation.

• Výchozí

  Operační systém, který má startovat jako výchozí.

• Přidat

  This option lets you pass information to the kernel or tell the kernel to give you more information as it boots.

• Zkoušet cizí OS

  If you already have other operating systems installed, Mageia attempts to add them to your new Mageia boot menu. If you don't want this behaviour, then untick the Probe Foreign OS option.

• Install in /EFI/BOOT. (Note: this menu option only becomes available where the installer detects that a machine is in UEFI mode).

  This option installs the bootloader in the /EFI/BOOT directory of the ESP (EFI System Partition). This can be useful when:

  (a) Installing onto a removable drive (e.g. a USB stick) that can be removed and plugged into a different machine. If the bootloader is stored in /EFI/BOOT, UEFI BIOS's will detect it and allow you to boot from that drive.

  (b) As a workaround where, due to a buggy UEFI BIOS, the newly written bootloader for Mageia will not be recognized at end of the installation.

• Video režim

  This sets the screen size and colour depth to be used by the boot menu. If you click the down-triangle you will be offered other size and colour depth options.

• Neměnit ESP nebo MBR

  Select this option if you don't want a bootable Mageia, but would rather chain-load it from another OS. You will get a warning that the bootloader is missing. Click Ok only if you are sure you understand the implications, and wish to proceed.

  	Chain-loading via legacy bootloaders (GRUB Legacy and LiLo) is no longer supported by Mageia as it is likely to fail when attempting to boot this resulting installation of Mageia. If you use anything other than GRUB2 or rEFInd for this purpose, then you do so at your own risk!