In this screen you can see the content of your hard drive(s) along with the DrakX partitioning proposals for where to install Mageia.
The actual options available from those shown below will vary according to the layout and content of your particular hard drive(s).
Hlavní možnosti
-
Pokud je dostupná tato volba, potom byly nalezeny stávající s Linuxem kompatibilní oddíly a tyto mohou být použity pro instalaci.
-
Pokud máte nevyužité místo na vašem pevném disku, potom ho tato volba využije pro novou instalaci Mageii.
-
Použít volné místo na oddílu s Windows
If you have unused space on an existing Windows partition, the installer may offer to use it. This can be a useful way of making room for your new Mageia installation but see the warning below.
With this option, the installer displays the remaining Windows partition in light blue and the proposed Mageia partition in dark blue with their intended sizes just underneath. You have the option to modify these sizes by clicking and dragging the gap between both partitions. See the following screenshot:
![[Varování]](warning.png)
This involves shrinking the size of the Windows partition, and therefore is a risky operation, so you should make sure you have backed up all important files before proceeding.
-
Toto vám dává úplnou kontrolu nad umístěním instalace na vašem pevném disku (resp. discích).
If you are not using the Custom disk partitioning option, then the installer will allocate the available space according to the following rules:
-
If the total available space is less than 50 GB, then only one partition is created. This will be the
/(root) partition. -
If the total available space is greater than 50 GB, then three partitions are created
-
6/19 of the total available place is allocated to
/with a maximum of 50 GB -
1/19 is allocated to
swapwith a maximum of 4 GB -
the rest (at least 12/19) is allocated to
/home
-
This means that from 160 GB or greater available space, the installer will create three partitions:
-
50 GB pro
/ -
4 GB pro
swap -
a zbytek pro
/home
![[Poznámka]](note.png) |
|
|
If you are using a UEFI system, the ESP (EFI System Partition) will be
automatically detected - or created if it does not exist yet - and mounted
on If you are using a Legacy (also known as BIOS) system with a GPT partitioned disk, you need to create a BIOS boot partition if it doesn't already exist. It should be about 1 MiB with no mount point. It can be created with the Installer, under Custom disk partitioning, like any other partition. Be sure to select „BIOS boot partition“ for filesystem type. See DiskDrake for information on how to proceed. |
![[Důležité]](important.png) |
|
|
Some newer drives are now using 4096 byte logical sectors, instead of the previous standard of 512. Due to lack of available hardware, the partitioning tool used in the installer has not been tested with such a drive. Some SSD devices now use an erase block size over 1 MB. If you have such a device we suggest that you partition the drive in advance, using an alternative partitioning tool like gparted, and to use the following settings:
Also make sure all partitions are created using an even number of megabytes. |