From 8f8a40e48c641cce7ecc9a096c6c838cbfd82536 Mon Sep 17 00:00:00 2001 From: Marja van Waes Date: Tue, 3 Feb 2015 22:31:04 +0100 Subject: New, partial, Slovenian translation --- sl/Select-and-use-ISOs.html | 825 ++++++++++++++++++++++++++++++++++++++++ sl/acceptLicense.html | 110 ++++++ sl/addUser.html | 271 +++++++++++++ sl/add_supplemental_media.html | 66 ++++ sl/ask_mntpoint_s.html | 131 +++++++ sl/chooseDesktop.html | 60 +++ sl/choosePackageGroups.html | 73 ++++ sl/choosePackagesTree.html | 47 +++ sl/configureServices.html | 61 +++ sl/configureTimezoneUTC.html | 66 ++++ sl/configureX_card_list.html | 96 +++++ sl/configureX_chooser.html | 113 ++++++ sl/configureX_monitor.html | 128 +++++++ sl/diskdrake.html | 98 +++++ sl/doPartitionDisks.html | 191 ++++++++++ sl/draft.png | Bin 0 -> 16150 bytes sl/exitInstall.html | 65 ++++ sl/formatPartitions.html | 81 ++++ sl/index.html | 221 +++++++++++ sl/installUpdates.html | 53 +++ sl/installer.html | 413 ++++++++++++++++++++ sl/media_selection.html | 76 ++++ sl/minimal-install.html | 52 +++ sl/misc-params.html | 353 +++++++++++++++++ sl/note.png | Bin 0 -> 2742 bytes sl/securityLevel.html | 49 +++ sl/selectCountry.html | 116 ++++++ sl/selectInstallClass.html | 135 +++++++ sl/selectKeyboard.html | 93 +++++ sl/selectLanguage.html | 103 +++++ sl/selectMouse.html | 55 +++ sl/setupBootloader.html | 193 ++++++++++ sl/setupBootloaderAddEntry.html | 92 +++++ sl/setupSCSI.html | 57 +++ sl/soundConfig.html | 84 ++++ sl/takeOverHdConfirm.html | 50 +++ sl/tip.png | Bin 0 -> 2925 bytes sl/uninstall-Mageia.html | 80 ++++ sl/warning.png | Bin 0 -> 3780 bytes 39 files changed, 4757 insertions(+) create mode 100644 sl/Select-and-use-ISOs.html create mode 100644 sl/acceptLicense.html create mode 100644 sl/addUser.html create mode 100644 sl/add_supplemental_media.html create mode 100644 sl/ask_mntpoint_s.html create mode 100644 sl/chooseDesktop.html create mode 100644 sl/choosePackageGroups.html create mode 100644 sl/choosePackagesTree.html create mode 100644 sl/configureServices.html create mode 100644 sl/configureTimezoneUTC.html create mode 100644 sl/configureX_card_list.html create mode 100644 sl/configureX_chooser.html create mode 100644 sl/configureX_monitor.html create mode 100644 sl/diskdrake.html create mode 100644 sl/doPartitionDisks.html create mode 100644 sl/draft.png create mode 100644 sl/exitInstall.html create mode 100644 sl/formatPartitions.html create mode 100644 sl/index.html create mode 100644 sl/installUpdates.html create mode 100644 sl/installer.html create mode 100644 sl/media_selection.html create mode 100644 sl/minimal-install.html create mode 100644 sl/misc-params.html create mode 100644 sl/note.png create mode 100644 sl/securityLevel.html create mode 100644 sl/selectCountry.html create mode 100644 sl/selectInstallClass.html create mode 100644 sl/selectKeyboard.html create mode 100644 sl/selectLanguage.html create mode 100644 sl/selectMouse.html create mode 100644 sl/setupBootloader.html create mode 100644 sl/setupBootloaderAddEntry.html create mode 100644 sl/setupSCSI.html create mode 100644 sl/soundConfig.html create mode 100644 sl/takeOverHdConfirm.html create mode 100644 sl/tip.png create mode 100644 sl/uninstall-Mageia.html create mode 100644 sl/warning.png (limited to 'sl') diff --git a/sl/Select-and-use-ISOs.html b/sl/Select-and-use-ISOs.html new file mode 100644 index 0000000..799c2f8 --- /dev/null +++ b/sl/Select-and-use-ISOs.html @@ -0,0 +1,825 @@ + + + + + Select and use ISOs + + + + + + +
+
+
+
+

Select and use ISOs +

+
+
+
+ + + + +
+
+
+
+

Media +

+
+
+
+ + + +
+
+
+
+

Definition +

+
+
+
+ + + +

Here, a medium (plural: media) is an ISO image file that allows you to + install and/or update Mageia and by extension any physical support the ISO + file is copied to. +

+ + +

You can find them here. +

+ +
+ + +
+
+
+
+

Classical installation media +

+
+
+
+ + + +
+
+
+
+
Common features +
+
+
+
+ + + +
+
    +
  • + +

    These ISOs use the traditional installer called drakx.

    + +
    • +
  • + +

    They are able to make a clean install or an update from previous releases.

    + +
    • +
+
+ +
+ + +
+
+
+
+
DVD +
+
+
+
+ + + +
+
    +
  • + +

    Different media for architecture 32 or 64 bits.

    + +
    • +
  • + +

    Some tools are available in the Welcome screen: Rescue System, Memory Test, + Hardware Detection Tool. +

    + +
    • +
  • + +

    Each DVD contains many available desktop environments and languages.

    + +
    • +
  • + +

    You'll be given the choice during the installation to add non free software.

    + +
    • +
+
+ +
+ + +
+
+
+
+
DVD dual arch +
+
+
+
+ + + +
+
    +
  • + +

    Both architectures are present on the same medium, the choice is made + automatically according to the detected CPU. +

    + +
    • +
  • + +

    Uses Xfce desktop only.

    + +
    • +
  • + +

    Not all languages are available. (be, bg, ca, de, en, es, fr, it, mk, pl, + pt, ru, sv, uk) TO BE CHECKED! +

    + +
    • +
  • + +

    It contains non free software.

    + +
    • +
+
+ +
+ +
+ + +
+
+
+
+

Live media +

+
+
+
+ + + +
+
+
+
+
Common features +
+
+
+
+ + + +
+
    +
  • + +

    Can be used to preview the distribution without installing it on a HDD, and + optionally install Mageia on to your HDD. + +

    + +
    • +
  • + +

    Each ISO contains only one desktop environment (KDE or GNOME).

    + +
    • +
  • + +

    Different media for 32 or 64 bit architectures.

    + +
    • +
  • + +

    Live ISOs can only be used to create clean + installations, they cannot be used to upgrade from previous + releases.

    + +
    • +
  • + +

    They contain non free software.

    + +
    • +
+
+ +
+ + +
+
+
+
+
Live CD KDE +
+
+
+
+ + + +
+
    +
  • + +

    KDE desktop environment only.

    + +
    • +
  • + +

    English language only.

    + +
    • +
  • + +

    32 bit only.

    + +
    • +
+
+ +
+ + +
+
+
+
+
Live CD GNOME +
+
+
+
+ + + +
+
    +
  • + +

    GNOME desktop environment only.

    + +
    • +
  • + +

    English language only.

    + +
    • +
  • + +

    32 bit only.

    + +
    • +
+
+ +
+ + +
+
+
+
+
Live DVD KDE +
+
+
+
+ + + +
+
    +
  • + +

    KDE desktop environment only.

    + +
    • +
  • + +

    All languages are present.

    + +
    • +
  • + +

    Different media for 32 or 64 bit architectures.

    + +
    • +
+
+ +
+ + +
+
+
+
+
Live DVD GNOME +
+
+
+
+ + + +
+
    +
  • + +

    GNOME desktop environment only.

    + +
    • +
  • + +

    All languages are present.

    + +
    • +
  • + +

    Different media for 32 or 64 bit architectures.

    + +
    • +
+
+ +
+ +
+ + +
+
+
+
+

Boot-only CD media +

+
+
+
+ + + +
+
+
+
+
Common features +
+
+
+
+ + + +
+
    +
  • + +

    Each one is a small image that contains no more than that which is needed to + start the drakx installer and find drakx-installer-stage2 and other packages + that are needed to continue and complete the install. These packages may be + on the PC hard disk, on a local drive, on a local network or on the + Internet. +

    + +
    • +
  • + +

    These media are very light (less than 100 MB) and are convenient when + bandwidth is too low to download a full DVD, a PC without a DVD drive or a + PC that can't boot from a USB stick. +

    + +
    • +
  • + +

    Different media for 32 or 64 bit architectures.

    + +
    • +
  • + +

    English language only.

    + +
    • +
+
+ +
+ + +
+
+
+
+
boot.iso +
+
+
+
+ + + +
+
    +
  • + +

    Contains only free software, for those people who refuse to use non-free + software. +

    + +
    • +
+
+ +
+ + +
+
+
+
+
boot-nonfree.iso +
+
+
+
+ + + +
+
    +
  • + +

    Contains non-free software (mostly drivers, codecs...) for people who need + it. +

    + +
    • +
+
+ +
+ +
+ +
+ + +
+
+
+
+

Downloading and Checking Media +

+
+
+
+ + + +
+
+
+
+

Downloading +

+
+
+
+ + + +

Once you have chosen your ISO file, you can download it using either http or + BitTorrent. In both cases, a window gives you some information, such as the + mirror in use and the possibility to change if the bandwidth is to low. If + http is chosen, you may also see something like +

+ + + + +

md5sum and sha1sum are tools to check the ISO integrity. Use only one of + them. Both hexadecimal numbers have been calculated by an algorithm from the + file to be downloaded. When you ask these algorithms to recalculate this + number from your downloaded file, either you have the same number and your + downloaded file is correct, or the number is different and you have a + failure. A failure infers that you should retry the download.Then this + window appears: +

+ + + + +

Check the radio button Save File.

+ +
+ + +
+
+
+
+

Checking the downloaded media integrity +

+
+
+
+ + + +

Open a console, no need to be root, and:

+ + +

- To use md5sum, type: [sam@localhost]$ md5sum + path/to/the/image/file.iso. +

+ + +

- To use sha1sum, type: [sam@localhost]$ sha1sum + path/to/the/image/file.iso. +

+ + +

and compare the obtained number on your computer (you may have to wait for a + while) with the number given by Mageia. Example: +

+ + + + +

+ +
+ +
+ + +
+
+
+
+

Burn or dump the ISO +

+
+
+
+ + + +

The checked ISO can now be burned to a CD or DVD or dumped to a USB + stick. These operations are not a simple copy and aim to make a boot-able + medium. +

+ + +
+
+
+
+

Burning the ISO to a CD/DVD +

+
+
+
+ + + +

Use whatever burner you wish but ensure the burning device is set correctly + to burn an image, burn data or files is not + correct. There is more information in the Mageia + wiki. +

+ +
+ + +
+
+
+
+

Dump the ISO to a USB stick +

+
+
+
+ + + +

All Mageia ISOs are hybrids, which means you can 'dump' them to a USB stick + and then use it to boot and install the system. +

+ + +
+ + + + + + + + +
[Pozor]
+ +

"dumping" an image onto a flash device destroys any previous file-system on + the device; any other data will be lost and the partition capacity will be + reduced to the image size. +

+ +
+
+ + +

To recover the original capacity, you must re-format the USB stick.

+ + +
+
+
+
+
Using Mageia +
+
+
+
+ + + +

You can use a graphical tool like IsoDumper

+ + +

You can also use the dd tool in a console:

+ + +
+
    +
  1. + +

    Open a console

    + +
    2. +
  2. + +

    Become root with the command su - (don't forget the + final '-' ) +

    + + + +
    3. +
  3. + +

    Plug your USB stick (do not mount it, this also means do not open any + application or file manager that could access or read it) +

    + +
    4. +
  4. + +

    Enter the command fdisk -l

    + + + +
    5. +
  5. + +

    Find the device name for your USB stick (by its size), for example /dev/sdb + in the screenshot above, it is a 8Go USB stick. +

    + +
    6. +
  6. + +

    Enter the command: # dd if=path/to/the/ISO/file of=/dev/sdX + bs=1M

    + + +

    Where X=your device name eg: /dev/sdc

    + +

    Example: # dd if=/home/user/Downloads/Mageia-4-x86_64-DVD.iso + of=/dev/sdb bs=1M

    + +
    7. +
  7. + +

    Enter the command: # sync

    + +
    8. +
  8. + +

    Unplug your USB stick, it is done

    + +
    9. +
+
+ +
+ + +
+
+
+
+
Using Windows +
+
+
+
+ + + +

You could try:

+ + +

- Rufus

+ + +

- Win32 + Disk Imager

+ + +

+ +
+ +
+ +
+ + +
+
+
+
+

Mageia Installation +

+
+
+
+ + + +

This step is detailed in the + Mageia documentation. +

+ + +

More information is available in the Mageia + wiki. +

+ +
+ + +
+ + diff --git a/sl/acceptLicense.html b/sl/acceptLicense.html new file mode 100644 index 0000000..5b098c0 --- /dev/null +++ b/sl/acceptLicense.html @@ -0,0 +1,110 @@ + + + + + Licenčna pogodba in opombe ob izdaji + + + + + + +
+
+
+
+

Licenčna pogodba in opombe ob izdaji +

+
+
+
+ + + + + + + + + + + + + + + + + + + + + + + +
+
+
+
+

Licenčna pogodba +

+
+
+
+ + + +

Pred namestitvijo Mageje pozorno preberite + licenčne pogoje. +

+ + +

Ti licenčni pogoji se nanašajo na celotno distribucijo + Mageia. Pred nadaljevanjem jih je potrebno + sprejeti. +

+ + +

Za sprejem preprosto označite Sprejmem in kliknite + gumb Naprej. +

+ + +

Zahvaljujemo se za vaš ogled tudi če se odločite, da teh pogojev ne boste + sprejeli. S klikom na gumb Izhod se bo vaš računalnik + ponovno zagnal. +

+ + + + +
+ + +
+
+
+
+

Opombe ob izdaji +

+
+
+
+ + + + + + +

Za ogled novosti te izdaje Mageje kliknite gumb + Opombe ob izdaji. +

+ +
+ +
+ + diff --git a/sl/addUser.html b/sl/addUser.html new file mode 100644 index 0000000..1e7c323 --- /dev/null +++ b/sl/addUser.html @@ -0,0 +1,271 @@ + + + + + User and Superuser Management + + + + + + +
+
+
+
+

User and Superuser Management +

+
+
+
+ + + + + + + + + + + + + + + + + + + + +
+
+
+
+

Nastavite geslo skrbnika (uporabnika root): +

+
+
+
+ + + +

It is advisable for all Mageia installations to + set a superuser or administrator's password, usually called the + root password in Linux. As you type a password into the + top box the colour of its shield will change from red to yellow to green + depending on the strength of the password. A green shield shows you are + using a strong password. You need to repeat the same password in the box + just below the first password box, this checks that you have not mistyped + the first password by comparing them. +

+ + +
+ + + + + + + + +
[Opomba]
+ +

All passwords are case sensitive, it is best to use a mixture of letters + (upper and lower case), numbers and other characters in a password. +

+ +
+
+ +
+ + +
+
+
+
+

Dodajte uporabnika +

+
+
+
+ + + +

Add a user here. A user has fewer rights than the superuser (root), but + enough to surf the internet, use office applications or play games and + anything else the average user does with his computer +

+ + +
+
    +
  • + +

    Icon: if you click on this button it will change the + users icon. +

    + +
    • +
  • + +

    Real Name: Insert the users real name into this text + box. +

    + +
    • +
  • + +

    Login Name: Here you enter the user login name or let + drakx use a version of the users real name. The login name is case + sensitive.

    + +
    • +
  • + +

    Password: In this text box you should type in the user + password. There is a shield at the end of the text box that indicates the + strength of the password. (See also Opomba) +

    + +
    • +
  • + +

    Password (again): Retype the user password into this + text box and drakx will check you have the same password in each of the user + password text boxes. +

    + +
    • +
+
+ + +
+ + + + + + + + +
[Opomba]
+ +

Any user you add while installing Mageia, will have a world readable (but + write protected) home directory. +

+ + +

However, while using your new install, any user you add in MCC - + System - Manage users on system will have a home directory that + is both read and write protected. +

+ + +

If you don't want a world readable home directory for anyone, it is advised + to only add a temporary user now and to add the real one(s) after reboot. +

+ + +

If you prefer world readable home directories, you might want to add all + extra needed users in the Configuration - Summary step + during the install. Choose User management. +

+ + +

Dovoljenje dostopa lahko spremenite tudi po namestitvi

+ +
+
+ + +
+ + +
+
+
+
+

Advanced User Management +

+
+
+
+ + + +

If the advanced button is clicked you are offered a + screen that allows you to edit the settings for the user you are + adding. Additionally, you can disable or enable a guest account. +

+ + +
+ + + + + + + + +
[Pozor]
+ +

Anything a guest with a default rbash guest account + saves to his /home directory will be erased when he logs out. The guest + should save his important files to a USB key. +

+ +
+
+ + +
+
    +
  • + +

    Enable guest account: Here you can enable or disable a + guest account. The guest account allows a guest to log into and use the PC, + but he has more restricted access than normal users. +

    + +
    • +
  • + +

    Shell: This drop down list allows you to change the + shell used by the user you are adding in the previous screen, options are + Bash, Dash and Sh +

    + +
    • +
  • + +

    User ID: Here you can set the user ID for the user you + are adding in the previous screen. This is a number. Leave it blank unless + you know what you are doing. +

    + +
    • +
  • + +

    Group ID: This lets you set the group ID. Also a + number, usually the same one as for the user. Leave it blank unless you know + what you are doing. +

    + +
    • +
+
+ +
+ +
+ + diff --git a/sl/add_supplemental_media.html b/sl/add_supplemental_media.html new file mode 100644 index 0000000..7eecfb4 --- /dev/null +++ b/sl/add_supplemental_media.html @@ -0,0 +1,66 @@ + + + + + Izbira virov (nastavitev dodatnih virov namestitve) + + + + + + +
+
+
+
+

Izbira virov (nastavitev dodatnih virov namestitve) +

+
+
+
+ + + + + + + + + +

This screen gives you the list of already recognized repositories. You can + add other sources for packages, like an optical disc or a remote source. The + source selection determines which packages will be available for selection + during the next steps. +

+ + +

For a network source, there are two steps to follow:

+ + +
+
    +
  1. + +

    Choosing and activation of the network, if not already up.

    + +
    2. +
  2. + +

    Selecting a mirror or specifying a URL (very first entry). By selecting a + mirror, you have access to the selection of all repositories managed by + Mageia, like the Nonfree , the Tainted repositories and the Updates. With + the URL, you can designate a specific repository or your own NFS + installation. +

    + +
    3. +
+
+ +
+ + diff --git a/sl/ask_mntpoint_s.html b/sl/ask_mntpoint_s.html new file mode 100644 index 0000000..2c774ac --- /dev/null +++ b/sl/ask_mntpoint_s.html @@ -0,0 +1,131 @@ + + + + + Izberite priklopne točke + + + + + + +
+
+
+
+

Izberite priklopne točke +

+
+
+
+ + + + + + + + + + + + + + + + +

Here you see the Linux partitions that have been found on your computer. If + you don't agree with the DrakX suggestions, you + can change the mount points. +

+ + +
+ + + + + + + + +
[Opomba]
+ +

If you change anything, make sure you still have a / + (root) partition. +

+ +
+
+ + +
+
    +
  • + +

    Every partition is shown as follows: "Device" ("Capacity", "Mount point", + "Type"). +

    + +
    • +
  • + +

    "Device", is made up of: "hard drive", ["hard drive number"(letter)], + "partition number" (for example, "sda5"). +

    + +
    • +
  • + +

    If you have many partitions, you can choose many different mount points from + the drop down menu, such as /, /home + and /var. You can even make your own mount points, for + instance /video for a partition where you want to store + your films, or /cauldron-home for the + /home partition of a cauldron install. +

    + +
    • +
  • + +

    For partitions you don't need to have access to, you can leave the mount + point field blank. +

    + +
    • +
+
+ + +
+ + + + + + + + +
[Pozor]
+ +

Choose Previous if you are not sure what to choose, + and then tick Custom disk partitioning. In the screen + that follows, you can click on a partition to see its type and size. +

+ +
+
+ + +

If you are sure the mount points are correct, click on + Next, and choose whether you only want to format the + partition(s) DrakX suggests, or more. +

+ +
+ + diff --git a/sl/chooseDesktop.html b/sl/chooseDesktop.html new file mode 100644 index 0000000..4efe52e --- /dev/null +++ b/sl/chooseDesktop.html @@ -0,0 +1,60 @@ + + + + + Izbira namizja + + + + + + +
+
+
+
+

Izbira namizja +

+
+
+
+ + + + + + + + + +

Depending on your selection here, you may be offered further screens to fine + tune your choice. +

+ + +

After the selection step(s), you will see a slide show during package + installation. The slide show can be disabled by pressing the + Details button +

+ + + + + + +

Choose whether you prefer to use the KDE or + Gnome desktop environment. Both come with a full + set of useful applications and tools. Tick Custom if + you want to use neither or both, or if you want something other than the + default software choices for these desktop environments. The + LXDE desktop is lighter than the previous two, + sporting less eye candy and fewer packages installed by default. +

+ +
+ + diff --git a/sl/choosePackageGroups.html b/sl/choosePackageGroups.html new file mode 100644 index 0000000..9d5e2a7 --- /dev/null +++ b/sl/choosePackageGroups.html @@ -0,0 +1,73 @@ + + + + + Izbira skupin paketov + + + + + + +
+
+
+
+

Izbira skupin paketov +

+
+
+
+ + + + + + + + +

Packages have been sorted into groups, to make choosing what you need on + your system a lot easier. The groups are fairly self explanatory, however + more information about the content of each is available in tool-tips which + become visible as the mouse is hovered over them. +

+ + +
+
    +
  • + +

    Delovna postaja.

    + +
    • +
  • + +

    Strežnik.

    + +
    • +
  • + +

    Grafično okolje.

    + +
    • +
  • + +

    Individual Package Selection: You can use this option to manually add or + remove packages. +

    + +
    • +
+
+ +

Read “Minimalna namestitev” for instructions on how to do a + minimal install. +

+ +
+ + diff --git a/sl/choosePackagesTree.html b/sl/choosePackagesTree.html new file mode 100644 index 0000000..f85d4b9 --- /dev/null +++ b/sl/choosePackagesTree.html @@ -0,0 +1,47 @@ + + + + + Izbira posamičnih paketov + + + + + + +
+
+
+
+

Izbira posamičnih paketov +

+
+
+
+ + + + + + + + +

Here you can add or remove any extra packages to customise your + installation. +

+ + +

After having made your choice, you can click on the floppy + icon at the bottom of the page to save your choice of packages + (saving to a USB key works, too). You can then use this file to install the + same packages on another system, by pressing the same button during install + and choosing to load it. +

+ +
+ + diff --git a/sl/configureServices.html b/sl/configureServices.html new file mode 100644 index 0000000..e740984 --- /dev/null +++ b/sl/configureServices.html @@ -0,0 +1,61 @@ + + + + + Nastavite vaše storitve + + + + + + +
+
+
+
+

Nastavite vaše storitve +

+
+
+
+ + + + + + + + + + + + +

Here you can set which services should (not) start when you boot your + system. +

+ + +

There are four groups, click on the triangle before a group to expand it and + see all services in it. +

+ + +

The setting DrakX chose are usually good. +

+ + +

If you highlight a service, some information about it is shown in the info + box below. +

+ + +

Only change things when you know very well what you are doing. +

+ +
+ + diff --git a/sl/configureTimezoneUTC.html b/sl/configureTimezoneUTC.html new file mode 100644 index 0000000..95e959c --- /dev/null +++ b/sl/configureTimezoneUTC.html @@ -0,0 +1,66 @@ + + + + + Nastavite vaš časovni pas + + + + + + +
+
+
+
+

Nastavite vaš časovni pas +

+
+
+
+ + + + + + + + + + + +

Choose your time zone by choosing your country or a city close to you in the + same time zone. +

+ + +

In next screen you can choose to set your hardware clock to local time or to + GMT, also known as UTC. +

+ + +
+ + + + + + + + +
[Opomba]
+ +

If you have more than one operating system on your computer, make sure they + are all set to local time, or all to UTC/GMT. +

+ +
+
+ +
+ + diff --git a/sl/configureX_card_list.html b/sl/configureX_card_list.html new file mode 100644 index 0000000..8a6d751 --- /dev/null +++ b/sl/configureX_card_list.html @@ -0,0 +1,96 @@ + + + + + Choose an X Server (Configure your Graphic Card) + + + + + + +
+
+
+
+

Choose an X Server (Configure your Graphic Card) +

+
+
+
+ + + + + + + + + + + + + +

DrakX has a very comprehensive database of video cards and will usually + correctly identify your video device. +

+ + +

If the installer has not correctly detected your graphic card and you know + which one you have, you can select it from the tree by: +

+
+
    +
  • + +

    Proizvajalec

    + +
    • +
  • + +

    ime vaše kartice

    + +
    • +
  • + +

    and the type of card

    + +
    • +
+
+ + +

If you cannot find your card in the vendor lists (because it's not yet in + the database or it's an older card) you may find a suitable driver in the + Xorg category +

+ + +

The Xorg listing provides more than 40 generic and open source video card + drivers. If you still can't find a named driver for your card there is the + option of using the vesa driver which provides basic capabilities. +

+ + +

Be aware that if you select an incompatible driver you may only have access + to the Commandline Interface. +

+ + +

Some video card manufacturers provide proprietary drivers for Linux which + may only be available in the Nonfree repository and in some cases only from + the card manufacturers' websites. +

+ + +

The Nonfree repository needs to be explicitly enabled to access them. If + you didn't select it previously, you should do this after your first reboot. +

+ +
+ + diff --git a/sl/configureX_chooser.html b/sl/configureX_chooser.html new file mode 100644 index 0000000..bcac3f8 --- /dev/null +++ b/sl/configureX_chooser.html @@ -0,0 +1,113 @@ + + + + + Nastavitev grafične kartice in monitorja + + + + + + +
+
+
+
+

Nastavitev grafične kartice in monitorja +

+
+
+
+ + + + + + + + +

No matter which graphical environment (also known as desktop environment) + you chose for this install of Mageia, they are + all based on a graphical user interface system called X Window + System, or simply X. So in order for + KDE, Gnome, LXDE or + any other graphical environment to work well, the following + X settings need to be correct. Choose the correct + settings if you can see that DrakX didn't make a + choice, or if you think the choice is incorrect. +

+ + +
+
    +
  • + +

    Graphic card: Choose your card + from the list if needed. +

    + +
    • +
  • + +

    Monitor: You can choose + Plug'n Play when applicable, or choose your monitor + from the Vendor or Generic + list. Choose Custom if you prefer to manually set the + horizontal and vertical refresh rates of your monitor. +

    + + +
    + + + + + + + + +
    [Pozor]
    + +

    Napačna frekvenca osveževanja lahko poškoduje vaš monitor +

    + +
    +
    + +
    • +
  • + +

    Resolution: Set the desired + resolution and color depth of your monitor here. +

    + +
    • +
  • + +

    Test: The test button does not + always appear during install. If the button is there, you can control your + settings by pressing it. If you see a question asking you whether your + settings are correct, you can answer "yes", and the settings will be + kept. If you don't see anything, you'll return to the configuration screen + and be able to reconfigure everything until the test is good. Make + sure your settings are on the safe side if the test button isn't + available

    + +
    • +
  • + +

    Options: Here you can choose to + enable or disable various options. +

    + +
    • +
+
+ +
+ + diff --git a/sl/configureX_monitor.html b/sl/configureX_monitor.html new file mode 100644 index 0000000..87e4394 --- /dev/null +++ b/sl/configureX_monitor.html @@ -0,0 +1,128 @@ + + + + + Izberite vaš zaslon + + + + + + +
+
+
+
+

Izberite vaš zaslon +

+
+
+
+ + + + + + + + + + + +

DrakX has a very comprehensive database of monitors and will usually + correctly identify yours. +

+ + +
+ + + + + + + + +
[Pozor]
+ +

Selecting a monitor with different characteristics could damage + your monitor or video hardware. Please don't try something without knowing + what you are doing. If in doubt you should consult your monitor + documentation +

+ +
+
+ + + + +

Custom

+ + +

This option allows you to set two critical parameters, the vertical refresh + rate and the horizontal sync rate. Vertical refresh determines how often the + screen is refreshed and horizontal sync is the rate at which scan lines are + displayed. +

+ + +

It is VERY IMPORTANT that you do not specify a monitor + type with a sync range that is beyond the capabilities of your monitor: you + may damage your monitor. If in doubt, choose a conservative setting and + consult your monitor documentation. +

+ + +

Plug 'n Play

+ + +

This is the default option and tries to determine the monitor type from the + monitor database. +

+ + +

Vendor

+ + +

If the installer has not correctly detected your monitor and you know which + one you have, you can select it from the tree by selecting: +

+
+
    +
  • + +

    Proizvajalec

    + +
    • +
  • + +

    the monitor manufacturers name

    + +
    • +
  • + +

    the monitor description

    + +
    • +
+
+ + +

Generic

+ + +

selecting this group displays nearly 30 display configurations such as + 1024x768 @ 60Hz and includes Flat panel displays as used in laptops. This is + often a good monitor selection group if you need to use the Vesa card driver + when your video hardware cannot be determined automatically. Once again it + may be wise to be conservative in your selections. +

+ +
+ + diff --git a/sl/diskdrake.html b/sl/diskdrake.html new file mode 100644 index 0000000..56d7f3f --- /dev/null +++ b/sl/diskdrake.html @@ -0,0 +1,98 @@ + + + + + Razdeljevanje diska po meri s programom DiskDrake + + + + + + +
+
+
+
+

Razdeljevanje diska po meri s programom DiskDrake +

+
+
+
+ + + + + + + + + + + + + + + + + + + + + +
+ + + + + + + + +
[Pozor]
+ +

If you wish to use encryption on your / partition you + must ensure that you have a separate /boot partition. The + encryption option for the /boot partition must NOT be + set, otherwise your system will be unbootable. +

+ +
+
+ + +

Adjust the layout of your disk(s) here. You can remove or create partitions, + change the filesystem of a partition or change its size and even view what + is in them before you start. + +

+ + +

There is a tab for every detected hard disk or other storage device, like an + USB key. For example sda, sdb and sdc if there are three of them. + +

+ + +

Push Clear all to wipe all partitions on the selected + storage device +

+ + +

For all other actions: click on the desired partition first. Then view it, + or choose a filesystem and a mount point, resize it or wipe it. +

+ + +

Continue until you adjusted everything to your wishes. +

+ + +

Click Done when you're ready. +

+
+ + diff --git a/sl/doPartitionDisks.html b/sl/doPartitionDisks.html new file mode 100644 index 0000000..7a3c124 --- /dev/null +++ b/sl/doPartitionDisks.html @@ -0,0 +1,191 @@ + + + + + Razdelitev diska + + + + + + +
+
+
+
+

Razdelitev diska +

+
+
+
+ + + + + + + + + + + + + + + + + + + + + + + +

In this screen you can see the content of your hard drive(s) and see the + solutions the DrakX partitioning wizard found for where to install + Mageia. +

+ + +

The options available from the list below will vary depending on your + particular hard drive(s) layout and content. +

+ + + + +

+
+
    +
  • + +

    Uporabi obstoječe razdelke +

    + + +

    If this option is available, then existing Linux compatible partitions have + been found and may be used for the installation. +

    + +
    • +
  • + +

    Uporabi razpoložljivi prostor +

    + + +

    If you have unused space on your hard drive then this option will use it for + your new Mageia installation. +

    + +
    • +
  • + +

    Uporabi razpoložljivi prostor v razdelku za Windows +

    + + +

    If you have unused space on an existing Windows partition, the installer may + offer to use it. +

    + + +

    This can be a useful way of making room for your new Mageia installation, + but is a risky operation so you should make sure you have backed up all + important files! +

    + + +

    Note that this involves shrinking the size of the Windows partition. The + partition must be "clean", meaning that Windows must have closed down + correctly the last time it was used. It must also have been defragmented, + although this is not a guarantee that all files in the partition have been + moved out of the area that is about to be used. It is highly recommended to + back up your personal files. +

    + +
    • +
+
+

+
+
    +
  • + +

    Zbriši in uporabi celoten disk. +

    + + +

    This option will use the complete drive for Mageia. +

    + + +

    Note! This will erase ALL data on the selected hard drive. Take care! +

    + + +

    If you intend to use part of the disk for something else, or you already + have data on the drive that you are not prepared to lose, then do not use + this option. +

    + +
    • +
+
+

+
+
    +
  • + +

    Po meri +

    + + +

    This gives you complete control over the placing of the installation on your + hard drive(s). +

    + +
    • +
+
+ + +
+ + + + + + + + +
[Pozor]
+ +

Some newer drives are now using 4096 byte logical sectors, instead of the + previous standard of 512 byte logical sectors. Due to lack of available + hardware, the partitioning tool used in the installer has not been tested + with such a drive. Also some ssd drives now use an erase block size over 1 + MB. We suggest to pre-partition the drive, using an alternative partitioning + tool like gparted, if you own such a device, and to use the following + settings: +

+ + +

"Align to" "MiB"

+ + +

"Free space preceding (MiB)" "2"

+ + +

Also make sure all partitions are created with an even number of megabytes.

+ +
+
+ +
+ + diff --git a/sl/draft.png b/sl/draft.png new file mode 100644 index 0000000..59673fe Binary files /dev/null and b/sl/draft.png differ diff --git a/sl/exitInstall.html b/sl/exitInstall.html new file mode 100644 index 0000000..30dcf25 --- /dev/null +++ b/sl/exitInstall.html @@ -0,0 +1,65 @@ + + + + + Čestitke + + + + + + +
+
+
+
+

Čestitke +

+
+
+
+ + + + + + + + + + + + +

You have finished installing and configuring + Mageia and it is now safe to remove the + installation medium and reboot your computer. +

+ + +

After reboot, in the bootloader screen, you can choose between the operating + systems on your computer (if you have more than one). +

+ + +

If you didn't adjust the settings for the bootloader, your Mageia install + will be automatically selected and started. +

+ + +

Uživajte +

+ + +

Visit www.mageia.org if you have any questions or want to contribute to + Mageia +

+ + + +
+ + diff --git a/sl/formatPartitions.html b/sl/formatPartitions.html new file mode 100644 index 0000000..32d5a1a --- /dev/null +++ b/sl/formatPartitions.html @@ -0,0 +1,81 @@ + + + + + Formatiranje + + + + + + +
+
+
+
+

Formatiranje +

+
+
+
+ + + + + + + + + + + + + + + + +

Here you can choose which partition(s) you wish to format. Any data on + partitions not marked for formatting will be saved. +

+ + +

Usually at least the partitions DrakX selected, need to be formatted +

+ + +

Click on Advanced to choose partitions you want to + check for so called bad blocks

+ + +
+ + + + + + + + +
[Namig]
+ +

If you're not sure you have made the right choice, you can click on + Previous, again on Previous + and then on Custom to get back to the main screen. + In that screen you can choose to view what is in your partitions. +

+ +
+
+ + +

When you are confident about the selection, click on + Next to continue. +

+ +
+ + diff --git a/sl/index.html b/sl/index.html new file mode 100644 index 0000000..979562f --- /dev/null +++ b/sl/index.html @@ -0,0 +1,221 @@ + + + + + Namestitev s programom DrakX + + + + +
+
+
+
+

Namestitev s programom DrakX +

+
+
+
+
+
+
+
Select and use ISOs
+
+
+
Media
+
Downloading and Checking Media
+
Burn or dump the ISO
+
Mageia Installation
+
+
+
DrakX, the Mageia Installer
+
+
+
Namestitveni koraki
+
+
+
+
Izberite jezik namestitve
+
Licenčna pogodba in opombe ob izdaji
+
+
+
Licenčna pogodba
+
Opombe ob izdaji
+
+
+
Setup SCSI
+
Namestitev ali nadgradnja
+
Tipkovnica
+
Razdelitev diska
+
Izberite priklopne točke
+
Confirm hard disk to be formatted
+
Razdeljevanje diska po meri s programom DiskDrake
+
Formatiranje
+
Izbira virov (nastavitev dodatnih virov namestitve)
+
Media Selection (Nonfree)
+
Izbira namizja
+
Izbira skupin paketov
+
Minimalna namestitev
+
Izbira posamičnih paketov
+
User and Superuser Management
+
+
+
Nastavite geslo skrbnika (uporabnika root):
+
Dodajte uporabnika
+
Advanced User Management
+
+
+
Nastavitev grafične kartice in monitorja
+
Choose an X Server (Configure your Graphic Card)
+
Izberite vaš zaslon
+
Glavne možnosti zagonskega nalagalnika
+
+
+
Using a Mageia bootloader
+
Using an existing bootloader
+
Napredne možnosti zagonskega nalagalnika
+
+
+
Add or Modify a Boot Menu Entry
+
Summary of miscellaneous parameters
+
+
+
System parameters
+
Hardware parameters
+
Network and Internet parameters
+
Varnost
+
+
+
Nastavite vaš časovni pas
+
Select your Country / Region
+
+
+
Način vnosa
+
+
+
Nastavite vaše storitve
+
Select mouse
+
Nastavitve zvoka
+
+
+
Napredno
+
+
+
Stopnja varnosti
+
Posodobitve
+
Čestitke
+
Uninstalling Mageia
+
+
+
Howto
+
+
+
+
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
+ + diff --git a/sl/installUpdates.html b/sl/installUpdates.html new file mode 100644 index 0000000..040051a --- /dev/null +++ b/sl/installUpdates.html @@ -0,0 +1,53 @@ + + + + + Posodobitve + + + + + + +
+
+
+
+

Posodobitve +

+
+
+
+ + + + + + + + + + + +

Since this version of Mageia was released, some + packages will have been updated or improved. +

+ + +

Choose yes if you wish to download and install them, + select no if you don't want to do this now, or if you + aren't connected to the Internet +

+ + +

Then press Next to continue +

+ + +
+ + diff --git a/sl/installer.html b/sl/installer.html new file mode 100644 index 0000000..c384265 --- /dev/null +++ b/sl/installer.html @@ -0,0 +1,413 @@ + + + + + DrakX, the Mageia Installer + + + + + + +
+
+
+
+

DrakX, the Mageia Installer +

+
+
+
+ + + + + + + + + + + + + + + +

Whether you are new to GNU-Linux or an experienced user, the Mageia + Installer is designed to help make your installation or upgrade as easy as + possible. +

+ + + + + +

The initial menu screen has various options, however the default one will + start the installer, which will normally be all that you will need. +

+ + + + +

From this first screen, it is possible to set some personal preferences:

+ + +
+
    +
  • + +

    The language (for the installation only, may be different that the chosen + language for the system) by pressing the key F2 +

    + + +

    + + + + +

    Use the arrow keys to select the language and press the key Enter.

    + + +

    Here is for example, the French welcome screen when using a Live + DVD/CD. Note that the Live DVD/CD menu does not propose: Rescue + System, Memory test and Hardware + Detection Tool. +

    + + +

    + + + + +

    + +
    • +
  • + +

    Change the screen resolution by pressing the F3 key.

    + + + +
    • +
  • + +

    Add some kernel options by pressing the F6 key.

    + + +

    If the installation fails, then it may be necessary to try again using one + of the extra options. The menu called by F6 displays a new line called + Boot options and propose four entries: +

    + + +

    - Default, it doesn't alter anything in the default options.

    + + +

    - Safe Settings, priority is given to the safer options to the detriment of + performances. +

    + + +

    - No ACPI (Advanced Configuration and Power Interface), power management + isn't taken into account. +

    + + +

    - No Local APIC (Local Advanced Programmable Interrupt Controller), it is + about CPU interruptions, select this option if you are asked for. +

    + + +

    When you select one of these entries, it modifies the default options + displayed in the Boot Options line. +

    + + +
    + + + + + + + + +
    [Opomba]
    + +

    In some Mageia releases, it may happen that the entries selected with the + key F6 does not appear in the Boot Options line, + however, they are really taken into account. +

    + +
    +
    + + + +
    • +
  • + +

    Add more kernel options by pressing the key F1

    + + +

    Pressing F1 opens a new window with more available options. Select one with + the arrow keys and press Enter to have more details or press the Esc key to + go back to the welcome screen. +

    + + +

    + + + + +

    + + +

    The detailed view about the option splash. Press Esc or select + Return to Boot Options to go back to the options + list. These options can by added by hand in the Boot + options line. +

    + + + + +

    + + +
    + + + + + + + + +
    [Opomba]
    + +

    The help is translated in the chosen language with the F2 key.

    + +
    +
    + +
    • +
+
+ + +

Here is the default welcome screen when using a Wired Network-based + Installation CD (Boot.iso or Boot-Nonfree.iso images): +

+ + +

It does not allow to change the language, the available options are + described in the screen. For more information about using a Wired + Network-based Installation CD, see the Mageia + Wiki

+ + +
+ + + + + + + + +
[Pozor]
+ +

Postavitev tipkovnice je sedaj Ameriška

+ +
+
+ + + + +
+
+
+
+

Namestitveni koraki +

+
+
+
+ + + +

The install process is divided into a number of steps, which can be followed + on the side panel of the screen. +

+ + +

Each step has one or more screens which may also have + Advanced buttons with extra, less commonly required, + options. +

+ + +

Most screens have Help buttons which give further + explanations about the current step. +

+ + +
+ + + + + + + + +
[Opomba]
+ +

If somewhere during install you decide to stop the installation, it is + possible to reboot, but please think twice before you do this. Once a + partition has been formatted or updates have started to be installed, your + computer is no longer in the same state and rebooting it could very well + leave you with an unusable system. If in spite of this you are very sure + rebooting is what you want, go to a text terminal by pressing the three keys + Alt Ctrl F2 at the same time. After that, press + Alt Ctrl Delete simultaneously to reboot. +

+ +
+
+ +
+ + +
+
+ +
+
+
+
+

Installation Problems and Possible Solutions +

+
+
+
+ + + +
+
+
+
+
No Graphical Interface +
+
+
+
+ + + +
+
    +
  • + +

    After the initial screen you did not reach the language selection + screen. This can happen with some graphic cards and older systems. Try using + low resolution by typing vgalo at the prompt. +

    + +
    • +
  • + +

    If the hardware is very old, a graphical installation may not be + possible. In this case it is worth trying a text mode installation. To use + this hit ESC at the first welcome screen and confirm with ENTER. You will be + presented with a black screen with the word "boot:". Type "text" and hit + ENTER. Now continue with the installation in text mode. +

    + +
    • +
+
+ +
+ + +
+
+
+
+
The Install Freezes +
+
+
+
+ + + +

If the system appeared to freeze during the installation, this may be a + problem with hardware detection. In this case the automatic detection of + hardware may be bypassed and dealt with later. To try this, type + noauto at the prompt. This option may also be combined with + other options as necessary. +

+ +
+ + +
+
+
+
+
RAM problem +
+
+
+
+ + + +

These will rarely be needed, but in some cases the hardware may report the + available RAM incorrectly. To specify this manually, you can use the + mem=xxxM parameter, where xxx is the correct amount of + RAM. e.g. mem=256M would specify 256MB of RAM. +

+ +
+ + +
+
+
+
+
Dynamic partitions +
+
+
+
+ + + +

If you converted your hard disk from "basic" format to "dynamic" format on + Microsoft Windows, you must know that it is impossible to install Mageia on + this disc. To go back to a basic disk, see the Microsoft documentation: + http://msdn.microsoft.com/en-us/library/cc776315.aspx. +

+ +
+ +
+ +
+ +
+ + diff --git a/sl/media_selection.html b/sl/media_selection.html new file mode 100644 index 0000000..4b985fd --- /dev/null +++ b/sl/media_selection.html @@ -0,0 +1,76 @@ + + + + + Media Selection (Nonfree) + + + + + + +
+
+
+
+

Media Selection (Nonfree) +

+
+
+
+ + + + + + + + + + +

Here you have the list of available repositories. Not all repositories are + available, according to which media you use for installing. The repositories + selection determines which packages will be available for selection during + the next steps. +

+ + +
+
    +
  • + +

    The Core repository cannot be disabled as it contains + the base of the distribution. +

    + +
    • +
  • + +

    The Nonfree repository includes packages that are + free-of-charge, i.e. Mageia may redistribute them, but they contain + closed-source software (hence the name - Nonfree). For example this + repository includes nVidia and ATI graphics card proprietary drivers, + firmware for various WiFi cards, etc. +

    + +
    • +
  • + +

    The Tainted repository includes packages released under + a free license. The main criteria for placing packages in this repository is + that they may infringe patents and copyright laws in some countries, + e.g. Multimedia codecs needed to play various audio/video files; packages + needed to play commercial video DVD, etc. +

    + +
    • +
+
+ +
+ + diff --git a/sl/minimal-install.html b/sl/minimal-install.html new file mode 100644 index 0000000..e260abb --- /dev/null +++ b/sl/minimal-install.html @@ -0,0 +1,52 @@ + + + + + Minimalna namestitev + + + + + + +
+
+
+
+

Minimalna namestitev +

+
+
+
+ + + + + + + + +

You can choose a Minimal Installation by de-selecting everything in the + Package Group Selection screen, see “Izbira skupin paketov”. +

+ +

Minimal Installation is intended for those with specific uses in mind for + their Mageia, such as a server or a specialised + workstation. You will probably use this option combined with Manual Package + Selection, see “Izbira posamičnih paketov”. +

+ +

If you choose this installation class, then the related screen will offer + you a few useful extras to install, such as documentation and X. +

+ + + + +
+ + diff --git a/sl/misc-params.html b/sl/misc-params.html new file mode 100644 index 0000000..c7fbf12 --- /dev/null +++ b/sl/misc-params.html @@ -0,0 +1,353 @@ + + + + + Summary of miscellaneous parameters + + + + + + +
+
+
+
+

Summary of miscellaneous parameters +

+
+
+
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

DrakX made smart choices for the configuration of your system depending on + the choices you made and on the hardware DrakX detected. You can check the + settings here and change them if you want after pressing + Configure. +

+ + +
+
+
+
+

System parameters +

+
+
+
+ + + +
+
    +
  • + +

    Časovni pas

    + + +

    DrakX selected a time zone for you, depending on your preferred + language. You can change it if needed. See also “Nastavite vaš časovni pas”

    + +
    • +
  • + +

    Država

    + + +

    If you are not in the selected country, it is very important that you + correct the setting. See “Select your Country / Region”

    + +
    • +
  • + +

    Zagonski nalagalnik

    + + +

    DrakX has made good choices for the bootloader setting. +

    + + +

    Do not change anything, unless you know how to configure Grub and/or Lilo +

    + + +

    For more information, see “Glavne možnosti zagonskega nalagalnika”

    + +
    • +
  • + +

    User management

    + + +

    You can add extra users here. They will each get their own + /home directories. +

    + +
    • +
  • + +

    Services: +

    + + +

    System services refer to those small programs which run the background + (daemons). This tool allows you to enable or disable certain tasks. +

    + + +

    You should check carefully before changing anything here - a mistake may + prevent your computer from operating correctly. +

    + + +

    For more information, see “Nastavite vaše storitve”

    + +
    • +
+
+ +
+ + +
+
+
+
+

Hardware parameters +

+
+
+
+ + + +
+
    +
  • + +

    Tipkovnica: +

    + + +

    This is where you setup or change your keyboard layout which will depend on + your location, language or type of keyboard. +

    + +
    • +
  • + +

    Mouse: +

    + + +

    Here you can add or configure other pointing devices, tablets, trackballs + etc. +

    + +
    • +
  • + +

    Sound card: +

    + + +

    The installer uses the default driver, if there is a default one. The option + to select a different driver is only given when there is more than one + driver for your card, but none of them is the default one. +

    + +
    • +
  • + +

    Graphical interface: +

    + + +

    This section allows you to configure your graphic card(s) and displays. +

    + + +

    For more information, see “Nastavitev grafične kartice in monitorja”. +

    + +
    • +
+
+ + + +
+ + +
+
+
+
+

Network and Internet parameters +

+
+
+
+ + + +
+
    +
  • + +

    Network: +

    + + +

    You can configure your network here, but for network cards with non-free + drivers it is better to do that after reboot, in the Mageia + Control Center, if you have not yet enabled the Nonfree media + repositories. +

    + + +
    + + + + + + + + +
    [Pozor]
    + +

    When you add a network card, do not forget to set your firewall to watch + that interface as well. +

    + +
    +
    + +
    • +
  • + +

    Proxies: +

    + + +

    A Proxy Server acts as an intermediary between your computer and the wider + internet. This section allows you to configure your computer to utilize a + proxy service. +

    + + +

    You may need to consult your systems administrator to get the parameters you + need to enter here +

    + +
    • +
+
+ +
+ + +
+
+
+
+

Varnost +

+
+
+
+ + + +
+
    +
  • + +

    Security Level: +

    + + +

    Here you set the Security level for your computer, in most cases the default + setting (Standard) is adequate for general use. +

    + + +

    Check the option which best suits your usage. +

    + +
    • +
  • + +

    Firewall: +

    + + +

    A firewall is intended to be a barrier between your important data and the + rascals out there on the internet who would compromise or steal it. +

    + + +

    Select the services that you wish to have access to your system. Your + selections will depend on what you use your computer for. +

    + + +
    + + + + + + + + +
    [Pozor]
    + +

    Bear in mind that allowing everything (no firewall) may be very risky. +

    + +
    +
    + +
    • +
+
+ +
+ +
+ + diff --git a/sl/note.png b/sl/note.png new file mode 100644 index 0000000..8f3a936 Binary files /dev/null and b/sl/note.png differ diff --git a/sl/securityLevel.html b/sl/securityLevel.html new file mode 100644 index 0000000..2da4508 --- /dev/null +++ b/sl/securityLevel.html @@ -0,0 +1,49 @@ + + + + + Stopnja varnosti + + + + + + +
+
+
+
+

Stopnja varnosti +

+
+
+
+ + + + + + + + + + +

You can adjust your security level here. +

+ + +

Leave the default settings as they are, if you don't know what to choose. +

+ + +

After install, it will always be possible to adjust your security settings + in the Security part of the Mageia Control Center. +

+ +
+ + diff --git a/sl/selectCountry.html b/sl/selectCountry.html new file mode 100644 index 0000000..e91329b --- /dev/null +++ b/sl/selectCountry.html @@ -0,0 +1,116 @@ + + + + + Select your Country / Region + + + + + + +
+
+
+
+

Select your Country / Region +

+
+
+
+ + + + + + + + + + + + +

Select your country or region. This is important for all kinds of settings, + like the currency and wireless regulatory domain. Setting the wrong country + can lead to not being able to use a Wireless network. +

+ + +

If your country isn't in the list, click the Other + Countries button and choose your country / region there. +

+ + +
+ + + + + + + + +
[Opomba]
+ +

If your country is only in the Other Countries list, + after clicking OK it may seem a country from the + first list was chosen. Please ignore this, DrakX will follow your real + choice. +

+ +
+
+ + +
+
+
+
+

Način vnosa +

+
+
+
+ + + + +

In the Other Countries screen you can also select an + input method (at the bottom of the list). Input methods allow users to input + multilingual characters (Chinese, Japanese, Korean, etc). IBus is the + default input method in Mageia DVDs, Africa/India and Asia/no-India + Live-CDs. For Asian and African locales, IBus will be set as default input + method so users should not need to configure it manually. Other input + methods(SCIM, GCIN, HIME, etc) also provide similar functions and can be + installed if you added HTTP/FTP media before package selection. +

+ + +
+ + + + + + + + +
[Opomba]
+ +

If you missed the input method setup during installation, you can access it + after you boot your installed system via "Configure your Computer" -> + "System", or by running localedrake as root. +

+ +
+
+ +
+ +
+ + diff --git a/sl/selectInstallClass.html b/sl/selectInstallClass.html new file mode 100644 index 0000000..9186a42 --- /dev/null +++ b/sl/selectInstallClass.html @@ -0,0 +1,135 @@ + + + + + Namestitev ali nadgradnja + + + + + + +
+
+
+
+

Namestitev ali nadgradnja +

+
+
+
+ + + + + + + + + + + + + + + +
+
    +
  • + +

    Namesti

    + + +

    Use this option for a fresh Mageia installation. +

    + +
    • +
  • + +

    Nadgradnja

    + + +

    If you have one or more Mageia installations on + your system, the installer will allow you to upgrade one of them to the + latest release. +

    + + +
    + + + + + + + + +
    [Pozor]
    + +

    Only upgrading from a previous Mageia version that was still + supported when this installer's version was released, has been + thoroughly tested. If you want to upgrade a Mageia version that had already + reached its End Of Life when this one was released, then it is better to do + a clean install while preserving your /home partition. +

    + +
    +
    + +
    • +
+
+ + +
+ + + + + + + + +
[Opomba]
+ +

If during install you decide to stop the installation, it is possible to + reboot, but please think twice before you do this. Once a partition has been + formatted or updates have started to be installed, your computer isn't in + the same state anymore and rebooting it could very well leave you with an + unusable system. If in spite of that you are very sure rebooting is what you + want, go to a text terminal by pressing the three keys Alt Ctrl + F2 at the same time. After that, press Alt Ctrl + Delete simultaneously to reboot. +

+ +
+
+ + +
+ + + + + + + + +
[Namig]
+ +

If you have discovered that you forgot to select an additional language, you + can return from the "Install or Upgrade" screen to the language choice + screen by pressing Alt Ctrl Home. Do + not do this later in the install. +

+ +
+
+ +
+ + diff --git a/sl/selectKeyboard.html b/sl/selectKeyboard.html new file mode 100644 index 0000000..bae5482 --- /dev/null +++ b/sl/selectKeyboard.html @@ -0,0 +1,93 @@ + + + + + Tipkovnica + + + + + + +
+
+
+
+

Tipkovnica +

+
+
+
+ + + + + + + +

DrakX selects an appropriate keyboard for your language. If no suitable + keyboard is found it will default to a US keyboard layout. +

+ + + + +
+
    +
  • + +

    Make sure that the selection is correct or choose another keyboard + layout. If you don't know which layout your keyboard has, look in the + specifications that came with your system, or ask the computer vendor. There + may even be a label on the keyboard that identifies the layout. You can also + look here: en.wikipedia.org/wiki/Keyboard_layout

    + +
    • +
  • + +

    If your keyboard isn't in the list shown, click on + More to get a full list, and select your keyboard + there. +

    + + +
    + + + + + + + + +
    [Pozor]
    + +

    After choosing a keyboard from the More dialog, + you'll return to the first keyboard choice dialog and it will seem as though + a keyboard from that screen was chosen. You can safely ignore this anomaly + and continue the installation: Your keyboard is the one you chose from the + full list. +

    + +
    +
    + +
    • +
  • + +

    If you choose a keyboard based on non-Latin characters, you will see an + extra dialog screen asking how you would prefer to switch between the Latin + and non-Latin keyboard layouts +

    + +
    • +
+
+ +
+ + diff --git a/sl/selectLanguage.html b/sl/selectLanguage.html new file mode 100644 index 0000000..9e8c7a3 --- /dev/null +++ b/sl/selectLanguage.html @@ -0,0 +1,103 @@ + + + + + Izberite jezik namestitve + + + + + + +
+
+
+
+

Izberite jezik namestitve +

+
+
+
+ + + + + + + + + + + + + + +

Select your preferred language, by first expanding the list for your + continent. Mageia will use this selection during + the installation and for your installed system. +

+ + +

If it is likely that you will require several languages installed on your + system, for yourself or other users, then you should use the + Multiple languages button to add them now. It will be + difficult to add extra language support after installation. +

+ + + + +
+ + + + + + + + +
[Pozor]
+ +

Even if you choose more than one language, you must first choose one of them + as your preferred language in the first language screen. It will also be + marked as chosen in the multiple languages screen . +

+ +
+
+ + +
+
    +
  • + +

    If your keyboard language is not the same as your preferred language, then + it is advisable to install the language of your keyboard as well. +

    + +
    • +
  • + +

    Mageia uses UTF-8 (Unicode) support by default. This may be disabled in the + "multiple languages" screen if you know that it is inappropriate for your + language. Disabling UTF-8 applies to all installed languages. +

    + +
    • +
  • + +

    You can change the language of your system after installation in the Mageia + Control Center -> System -> Manage localization for your system. +

    + +
    • +
+
+ +
+ + diff --git a/sl/selectMouse.html b/sl/selectMouse.html new file mode 100644 index 0000000..2e56d01 --- /dev/null +++ b/sl/selectMouse.html @@ -0,0 +1,55 @@ + + + + + Select mouse + + + + + + +
+
+
+
+

Select mouse +

+
+
+
+ + + + + + + + + + + + + + +

If you are not happy with how your mouse responds, you can select a + different one here. +

+ + +

Usually, Universal - Any PS/2 and USB + mice is a good choice. +

+ + +

Select Universal - Force evdev to + configure the buttons that do not work on a mouse with six or more buttons. +

+ +
+ + diff --git a/sl/setupBootloader.html b/sl/setupBootloader.html new file mode 100644 index 0000000..a0512b1 --- /dev/null +++ b/sl/setupBootloader.html @@ -0,0 +1,193 @@ + + + + + Glavne možnosti zagonskega nalagalnika + + + + + + +
+
+
+
+

Glavne možnosti zagonskega nalagalnika +

+
+
+
+ + + + + + + +

If you prefer different bootloader settings to those chosen automatically by + the installer, you can change them here. +

+ + +

You may already have another operating system on your machine, in which case + you need to decide whether to add Mageia to your existing bootloader, or + allow Mageia to create a new one. +

+ + +
+ + + + + + + + +
[Namig]
+ +

The Mageia graphical menus are nice :) +

+ +
+
+ + +
+
+
+
+

Using a Mageia bootloader +

+
+
+
+ + + +

By default, Mageia writes a new GRUB (legacy) bootloader into the MBR + (Master Boot Record) of your first hard drive. If you already have other + operating systems installed, Mageia attempts to add them to your new Mageia + boot menu. +

+ + +

Mageia now also offers GRUB2 as an optional bootloader in addition to GRUB + legacy and Lilo. +

+ + +
+ + + + + + + + +
[Pozor]
+ +

Linux systems which use the GRUB2 bootloader are not currently supported by + GRUB (legacy) and will not be recognised if the default GRUB bootloader is + used. +

+ + +

The best solution here is to use the GRUB2 bootloader which is available at + the Summary page during installation. +

+ +
+
+ +
+ + +
+
+
+
+

Using an existing bootloader +

+
+
+
+ + + +

If you decide to use an existing bootloader then you will need to remember + to STOP at the summary page during the installation and click the Bootloader + Configure button, which will allow you to change the + bootloader install location. +

+ + +

Do not select a device e.g."sda", or you will overwrite your existing + MBR. You must select the root partition that you chose during the + partitioning phase earlier, e.g. sda7. +

+ + +

To be clear, sda is a device, sda7 is a partition on that device. +

+ + +
+ + + + + + + + +
[Namig]
+ +

Go to tty2 with Ctrl+Alt+F2 and type df to check where + your / (root) partition is. Ctrl+Alt+F7 takes you back to + the installer screen. +

+ +
+
+ + +

The exact procedure for adding your Mageia system to an existing bootloader + is beyond the scope of this help, however in most cases it will involve + running the relevant bootloader installation program which should detect and + add it automatically. See the documentation for the operating system in + question. +

+ +
+ + +
+
+
+
+

Napredne možnosti zagonskega nalagalnika +

+
+
+
+ + + +

If you have very limited disk space for the / partition + that contains /tmp, click on + Advanced and check the box for Clean /tmp + at each boot. This helps to maintain some free space. +

+ +
+ +
+ + diff --git a/sl/setupBootloaderAddEntry.html b/sl/setupBootloaderAddEntry.html new file mode 100644 index 0000000..05081d7 --- /dev/null +++ b/sl/setupBootloaderAddEntry.html @@ -0,0 +1,92 @@ + + + + + Add or Modify a Boot Menu Entry + + + + + + +
+
+
+
+

Add or Modify a Boot Menu Entry +

+
+
+
+ + + + + +

You can add an entry or modify the one you select first, by pressing the + relevant button in the Bootloader Configuration screen + and editing the screen that pops up on top of it. +

+ + +
+ + + + + + + + +
[Opomba]
+ +

If you have chosen Grub 2 as your bootloader, you cannot use + this tool to edit entries at this step, press 'Next'. You need to manually + edit /boot/grub2/custom.cfg or use grub-customizer + instead. +

+ +
+
+ + + + +

Some things that can be done without any risk, are changing the label of an + entry and ticking the box to make an entry the default one. +

+ + +

You can add the proper version number of an entry, or rename it completely.

+ + +

The default entry is the one the systems boots into if you don't make a + choice while booting up. +

+ + +
+ + + + + + + + +
[Pozor]
+ +

Editing other things can leave you with an unbootable system. Please don't + just try something without knowing what you are doing. +

+ +
+
+ +
+ + diff --git a/sl/setupSCSI.html b/sl/setupSCSI.html new file mode 100644 index 0000000..179edcb --- /dev/null +++ b/sl/setupSCSI.html @@ -0,0 +1,57 @@ + + + + + Setup SCSI + + + + + + +
+
+
+
+

Setup SCSI +

+
+
+
+ + + + + + + + + + + + + + + + +

DrakX usually detects hard disks correctly. With some older SCSI controllers + it may be unable to determine the correct drivers to use and subsequently + fail to recognise the drive. +

+ + +

If this happens, you will need to manually tell Drakx which SCSI drive(s) + you have. +

+ + +

DrakX should then be able to configure the drive(s) correctly. +

+ +
+ + diff --git a/sl/soundConfig.html b/sl/soundConfig.html new file mode 100644 index 0000000..0abff26 --- /dev/null +++ b/sl/soundConfig.html @@ -0,0 +1,84 @@ + + + + + Nastavitve zvoka + + + + + + +
+
+
+
+

Nastavitve zvoka +

+
+
+
+ + + + + + + + +

In this screen the name of the driver that the installer chose for your + sound card is given, which will be the default driver if we have a default + one. + +

+ +

The default driver should work without problems. However, if after install + you do encounter problems, then run draksound or start + this tool via MCC (Mageia Control Center), by choosing the + Hardware tab and clicking on Sound + Configuration at the top right of the screen. + +

+ +

Then, in the draksound or "Sound Configuration" tool screen, click on + Advanced and then on + Troubleshooting to find very useful advice about how + to solve the problem. + +

+ + +
+
+
+
+

Napredno +

+
+
+
+ + + +

Clicking Advanced in this screen, during install, is + useful if there is no default driver and there are several drivers + available, but you think the installer selected the wrong one. + +

+ + +

In that case you can select a different driver after clicking on + Let me pick any driver. + +

+ + +
+ +
+ + diff --git a/sl/takeOverHdConfirm.html b/sl/takeOverHdConfirm.html new file mode 100644 index 0000000..a50d549 --- /dev/null +++ b/sl/takeOverHdConfirm.html @@ -0,0 +1,50 @@ + + + + + Confirm hard disk to be formatted + + + + + + +
+
+
+
+

Confirm hard disk to be formatted +

+
+
+
+ + + + + + + + + + + + + + +

Click on Previous if you are not sure about your + choice. +

+ + +

Click on Next if you are sure and want to erase every + partition, every operating system and all data on that hard disk. +

+ +
+ + diff --git a/sl/tip.png b/sl/tip.png new file mode 100644 index 0000000..fac7493 Binary files /dev/null and b/sl/tip.png differ diff --git a/sl/uninstall-Mageia.html b/sl/uninstall-Mageia.html new file mode 100644 index 0000000..756602d --- /dev/null +++ b/sl/uninstall-Mageia.html @@ -0,0 +1,80 @@ + + + + + Uninstalling Mageia + + + + + +
+
+
+
+

Uninstalling Mageia +

+
+
+
+ + + + + + +
+
+
+
+

Howto +

+
+
+
+ + + +

If Mageia didn't convince you or you can't install it correctly, in short + you want get rid of it. That is your right and Mageia also gives you the + possibility to uninstall. This is not true for every operating system. +

+ + +

After your data backup, reboot your installation Mageia DVD and select + Rescue system, then, Restore Windows boot loader. At the next boot, you will + only have Windows with no option to choose your operating system. +

+ + +

To recover the space used by Mageia partitions on Windows, click on + Start -> Control Panel -> Administrative Tools -> Computer Management + -> Storage -> Disk Management to access to the partition + management. You will recognize the Mageia partition because they are labeled + Unknown, and also by their size and place in the + disk. Right click on each of these partitions and select + Delete. The space will be freed. +

+ + +

If you are using Windows XP, you can create a new partition and format it + (FAT32 or NTFS). It will get a partition letter. +

+ + +

If you have Vista or 7, you have one more possibility, you can extend the + existing partition that is at the left of the freed space. There are other + partitioning tools that can be used, such as gparted, available for both + windows and linux. As always, when changing partitions, be very careful, and + make sure all important things have been backed up. +

+ +
+ +
+ + diff --git a/sl/warning.png b/sl/warning.png new file mode 100644 index 0000000..be0546f Binary files /dev/null and b/sl/warning.png differ -- cgit v1.2.1