From c16de2d51dd989223f32f81a4c6923a56f695ebd Mon Sep 17 00:00:00 2001 From: Marja van Waes Date: Sun, 14 Jun 2015 22:38:11 +0200 Subject: update hr files --- hr/add_supplemental_media.html | 24 ++++++++++++++++ hr/choosePackageGroups.html | 4 +-- hr/diskdrake.html | 53 +++++++++++++++++++++++----------- hr/doPartitionDisks.html | 13 +++++++-- hr/index.html | 2 +- hr/installer.html | 63 +++++++++++++++++++++++------------------ hr/minimal-install.html | 34 ++++++++++++++++------ hr/setupBootloader.html | 19 +++++++++++++ hr/setupBootloaderAddEntry.html | 8 +++--- hr/uninstall-Mageia.html | 2 +- 10 files changed, 159 insertions(+), 63 deletions(-) (limited to 'hr') diff --git a/hr/add_supplemental_media.html b/hr/add_supplemental_media.html index 5d8e5a1..83b6be9 100644 --- a/hr/add_supplemental_media.html +++ b/hr/add_supplemental_media.html @@ -60,6 +60,30 @@ + +
+ + + + + + + + +
[Bilješka]
+ +

If you are updating a 64 bit installation which may contain some 32 bit + packages, it is advised to use this screen to add an online mirror by + ticking one of the Network protocols here. The 64 bit DVD iso only contains + 64 bit and noarch packages, it will not be able to update the 32 bit + packages. However, after adding an online mirror, installer will find the + needed 32 bit packages there. +

+ +
+
+ + diff --git a/hr/choosePackageGroups.html b/hr/choosePackageGroups.html index 40ecc3b..52895ee 100644 --- a/hr/choosePackageGroups.html +++ b/hr/choosePackageGroups.html @@ -64,8 +64,8 @@ -

Pročitaj the section called „Minimal Install“ za instrukcije kako - napraviti minimalnu instalaciju. +

Read the section called „Minimal Install“ for instructions on how to do a + minimal install (without or with X & IceWM).

diff --git a/hr/diskdrake.html b/hr/diskdrake.html index af5f851..7628b4e 100644 --- a/hr/diskdrake.html +++ b/hr/diskdrake.html @@ -29,11 +29,6 @@ - - - - - @@ -41,8 +36,11 @@ + + +
@@ -64,35 +62,56 @@ -

Adjust the layout of your disk(s) here. You can remove or create partitions, - change the filesystem of a partition or change its size and even view what - is in them before you start. - +

Adjust the layout of your disk(s) here. You can remove or create + partitions, change the filesystem of a partition or change its size and even + view what is in them before you start.

- +

There is a tab for every detected hard disk or other storage device, like an USB key. For example sda, sdb and sdc if there are three of them. -

- +

Push Clear all to wipe all partitions on the selected storage device

- +

For all other actions: click on the desired partition first. Then view it, or choose a filesystem and a mount point, resize it or wipe it.

+ - -

Continue until you adjusted everything to your wishes. +

Continue until you adjusted everything to your wishes.

- +

Click Done when you're ready. -

+

+ + +
+
+ + + + + + + +
[Bilješka]
+ +

If you are installing Mageia on an UEFI system, check that an ESP (EFI + System Partition) is present and correctly mounted on /boot/EFI (see above) +

+ + +

+ +
+
+ diff --git a/hr/doPartitionDisks.html b/hr/doPartitionDisks.html index 6ca6ce0..fdb010f 100644 --- a/hr/doPartitionDisks.html +++ b/hr/doPartitionDisks.html @@ -30,8 +30,6 @@ - - @@ -39,7 +37,9 @@ + + @@ -107,6 +107,15 @@ moved out of the area that is about to be used. It is highly recommended to back up your personal files.

+ + +

With this option, the installer displays the remaining Windows partition in + light blue and the future Mageia partition in dark blue with their intended + sizes just under. You have the possibility to adapt these sizes by clicking + and draging the gap between both partitions. See the screen-shot below. +

+ + diff --git a/hr/index.html b/hr/index.html index 028a914..be9639c 100644 --- a/hr/index.html +++ b/hr/index.html @@ -111,7 +111,7 @@
Uninstalling Mageia
-
Howto
+
Howto
diff --git a/hr/installer.html b/hr/installer.html index b277824..cea0c8b 100644 --- a/hr/installer.html +++ b/hr/installer.html @@ -53,6 +53,8 @@ + +

From this first screen, it is possible to set some personal preferences:

@@ -61,7 +63,7 @@

  • The language (for the installation only, may be different that the chosen - language for the system) by pressing the key F2 + language for the system) by pressing the key F2 (Legacy mode only)

    @@ -90,14 +92,17 @@
  • -

    Promjenite rezoluciju zaslona pritiskom na tipku F3.

    +

    Change the screen resolution by pressing the F3 key (Legacy mode only).

  • -

    Add some kernel options by pressing the F6 key.

    +

    Add some kernel options by pressing the F6 + key for the legacy mode or the e key for + the UEFI mode. +

    If the installation fails, then it may be necessary to try again using one @@ -153,7 +158,7 @@

  • -

    Add more kernel options by pressing the key F1

    +

    Add more kernel options by pressing the key F1 (Legacy mode only).

    Pressing F1 opens a new window with more available options. Select one with @@ -203,6 +208,10 @@ +

    For more information about kernel options on legacy and UEFI systems, see: + https://wiki.mageia.org/en/How_to_set_up_kernel_options

    + +

    Here is the default welcome screen when using a Wired Network-based Installation CD (Boot.iso or Boot-Nonfree.iso images):

    @@ -287,7 +296,7 @@ - +
    @@ -297,9 +306,9 @@
    - + - +
    @@ -309,35 +318,35 @@
    - + - +
    • - +

      After the initial screen you did not reach the language selection screen. This can happen with some graphic cards and older systems. Try using low resolution by typing vgalo at the prompt.

      - +
    • - +

      If the hardware is very old, a graphical installation may not be possible. In this case it is worth trying a text mode installation. To use this hit ESC at the first welcome screen and confirm with ENTER. You will be presented with a black screen with the word "boot:". Type "text" and hit ENTER. Now continue with the installation in text mode.

      - +
    - + - +
    @@ -347,19 +356,19 @@
    - + - +

    If the system appeared to freeze during the installation, this may be a problem with hardware detection. In this case the automatic detection of hardware may be bypassed and dealt with later. To try this, type noauto at the prompt. This option may also be combined with other options as necessary.

    - + - +
    @@ -369,18 +378,18 @@
    - + - +

    These will rarely be needed, but in some cases the hardware may report the available RAM incorrectly. To specify this manually, you can use the mem=xxxM parameter, where xxx is the correct amount of RAM. e.g. mem=256M would specify 256MB of RAM.

    - + - +
    @@ -390,17 +399,17 @@
    - + - +

    If you converted your hard disk from "basic" format to "dynamic" format on Microsoft Windows, you must know that it is impossible to install Mageia on this disc. To go back to a basic disk, see the Microsoft documentation: http://msdn.microsoft.com/en-us/library/cc776315.aspx.

    - + - + diff --git a/hr/minimal-install.html b/hr/minimal-install.html index b628013..4cbfe17 100644 --- a/hr/minimal-install.html +++ b/hr/minimal-install.html @@ -22,29 +22,45 @@ - + + - - + + - +

    You can choose a Minimal Installation by de-selecting everything in the Package Group Selection screen, see the section called „Odabir grupe paketa“.

    - + +

    If desired, you can additionally tick the "Individual package selection" + option in the same screen. +

    +

    Minimal Installation is intended for those with specific uses in mind for their Mageia, such as a server or a specialised - workstation. You will probably use this option combined with Manual Package - Selection, see the section called „Izaberi pojedinačne pakete“. + workstation. You will probably use this option combined with the "Individual + package selection" option mentioned above, to fine-tune your installation, + see the section called „Izaberi pojedinačne pakete“.

    - +

    If you choose this installation class, then the related screen will offer you a few useful extras to install, such as documentation and X.

    + +

    If selected, "With X" will also include IceWM as lightweight desktop + environment. +

    + +

    The basic documentation is provided in the form of man and info pages. It + contains the man pages from the Linux Documentation + Project and the GNU + coreutils info pages. +

    - + diff --git a/hr/setupBootloader.html b/hr/setupBootloader.html index 799f2c2..636e0b3 100644 --- a/hr/setupBootloader.html +++ b/hr/setupBootloader.html @@ -29,6 +29,25 @@ +
    + + + + + + + + +
    [Bilješka]
    + +

    With an UEFI system, the user interface is slightly different as you cannot + choose the boot loader (first drop down list) since only one is available +

    + +
    +
    + +

    If you prefer different bootloader settings to those chosen automatically by the installer, you can change them here.

    diff --git a/hr/setupBootloaderAddEntry.html b/hr/setupBootloaderAddEntry.html index d6b63c2..59616c7 100644 --- a/hr/setupBootloaderAddEntry.html +++ b/hr/setupBootloaderAddEntry.html @@ -42,10 +42,10 @@ -

    If you have chosen Grub 2 as your bootloader, you cannot use - this tool to edit entries at this step, press 'Next'. You need to manually - edit /boot/grub2/custom.cfg or use grub-customizer - instead. +

    If you have chosen Grub 2 as your bootloader, or Grub2-efi for + UEFI systems, you cannot use this tool to edit entries at this step, press + 'Next'. You need to manually edit /boot/grub2/custom.cfg or use + grub-customizer instead.

    diff --git a/hr/uninstall-Mageia.html b/hr/uninstall-Mageia.html index 3432f27..88d1120 100644 --- a/hr/uninstall-Mageia.html +++ b/hr/uninstall-Mageia.html @@ -31,7 +31,7 @@
    -

    Howto +

    Howto

    -- cgit v1.2.1