Select your Country / Region

Can be used to preview the distribution without installing it on a HDD, and optionally install Mageia on to your HDD. -

Dump the ISO to a USB stick +

Zapsat ISO na USB flash

@@ -725,7 +725,7 @@

Enter the command fdisk -l

Použijte příkaz fdisk -l

@@ -744,8 +744,9 @@

Where X=your device name eg: /dev/sdc

+ -

Example: # dd if=/home/user/Downloads/Mageia-4-x86_64-DVD.iso +

Example: # dd if=/home/user/Downloads/Mageia-4-x86_64-DVD.iso of=/dev/sdb bs=1M

@@ -777,7 +778,7 @@ - You could try: + Můžete vyzkoušet: - Rufus @@ -819,7 +820,6 @@

-

diff --git a/cs/add_supplemental_media.html b/cs/add_supplemental_media.html index ef4a541..735b04e 100644 --- a/cs/add_supplemental_media.html +++ b/cs/add_supplemental_media.html @@ -6,7 +6,7 @@ - + - + - Formatting + Formátování @@ -30,7 +30,7 @@ - + diff --git a/cs/index.html b/cs/index.html index eec6383..2e25521 100644 --- a/cs/index.html +++ b/cs/index.html @@ -36,7 +36,7 @@ Instalační kroky - + Problémy při instalaci a možné řešení Prosím zvolte si jazyk, který chcete používat @@ -54,7 +54,7 @@ Zvolte si přípojné body Confirm hard disk to be formatted Vlastní rozdělení disku pomocí DiskDrake - Formatting + Formátování Výběr zdroje (Nastavení doplňkových instalačních zdojů) Výběr zdrojů (Nonfree) Výběr pracovního prostředí @@ -91,7 +91,7 @@ Nastavení časového pásma - Select your Country / Region + Vyberte zemi Vstupní metoda @@ -111,7 +111,7 @@ Uninstalling Mageia - Howto + Howto diff --git a/cs/installer.html b/cs/installer.html index 4f758f6..c07b713 100644 --- a/cs/installer.html +++ b/cs/installer.html @@ -90,7 +90,7 @@ - Change the screen resolution by pressing the F3 key. + Změnit rozlišení obrazovky klávesou F3 @@ -287,125 +287,120 @@ - - - - - + + + + + + Problémy při instalaci a možné řešení + + + + + + + + - Problémy při instalaci a možné řešení + Bez grafického rozhraní - + + + + + + + After the initial screen you did not reach the language selection + screen. This can happen with some graphic cards and older systems. Try using + low resolution by typing vgalo at the prompt. + + + + + + If the hardware is very old, a graphical installation may not be + possible. In this case it is worth trying a text mode installation. To use + this hit ESC at the first welcome screen and confirm with ENTER. You will be + presented with a black screen with the word "boot:". Type "text" and hit + ENTER. Now continue with the installation in text mode. + + + + + - - + + + + + + - - No Graphical Interface - - + Instalace zamrzne + - - - - - - - - After the initial screen you did not reach the language selection - screen. This can happen with some graphic cards and older systems. Try using - low resolution by typing vgalo at the prompt. - - - - - - If the hardware is very old, a graphical installation may not be - possible. In this case it is worth trying a text mode installation. To use - this hit ESC at the first welcome screen and confirm with ENTER. You will be - presented with a black screen with the word "boot:". Type "text" and hit - ENTER. Now continue with the installation in text mode. - - - - - - + + + If the system appeared to freeze during the installation, this may be a + problem with hardware detection. In this case the automatic detection of + hardware may be bypassed and dealt with later. To try this, type + noauto at the prompt. This option may also be combined with + other options as necessary. + - - + + + + + + - - Instalace zamrzne - - + problém paměti RAM + - - - - If the system appeared to freeze during the installation, this may be a - problem with hardware detection. In this case the automatic detection of - hardware may be bypassed and dealt with later. To try this, type - noauto at the prompt. This option may also be combined with - other options as necessary. - - + + + These will rarely be needed, but in some cases the hardware may report the + available RAM incorrectly. To specify this manually, you can use the + mem=xxxM parameter, where xxx is the correct amount of + RAM. e.g. mem=256M would specify 256MB of RAM. + - - + + + + + + - - problém paměti RAM - - + Dynamic partitions + - - - - These will rarely be needed, but in some cases the hardware may report the - available RAM incorrectly. To specify this manually, you can use the - mem=xxxM parameter, where xxx is the correct amount of - RAM. e.g. mem=256M would specify 256MB of RAM. - - + + + If you converted your hard disk from "basic" format to "dynamic" format on + Microsoft Windows, you must know that it is impossible to install Mageia on + this disc. To go back to a basic disk, see the Microsoft documentation: + http://msdn.microsoft.com/en-us/library/cc776315.aspx. + - - - - - Dynamic partitions - - - - - - - - If you converted your hard disk from "basic" format to "dynamic" format on - Microsoft Windows, you must know that it is impossible to install Mageia on - this disc. To go back to a basic disk, see the Microsoft documentation: - http://msdn.microsoft.com/en-us/library/cc776315.aspx. - - - - - + diff --git a/cs/misc-params.html b/cs/misc-params.html index 18bb8c8..9be7d6b 100644 --- a/cs/misc-params.html +++ b/cs/misc-params.html @@ -87,7 +87,7 @@ If you are not in the selected country, it is very important that you - correct the setting. See „Select your Country / Region“ + correct the setting. See „Vyberte zemi“ diff --git a/cs/selectCountry.html b/cs/selectCountry.html index a00a55b..8e2d029 100644 --- a/cs/selectCountry.html +++ b/cs/selectCountry.html @@ -2,7 +2,7 @@ - Select your Country / Region + Vyberte zemi @@ -13,11 +13,11 @@ table { font-family: sans-serif; font-size: 13px } --> - + - Select your Country / Region + Vyberte zemi diff --git a/cs/uninstall-Mageia.html b/cs/uninstall-Mageia.html index b32db8b..77e1295 100644 --- a/cs/uninstall-Mageia.html +++ b/cs/uninstall-Mageia.html @@ -31,7 +31,7 @@ - Howto + Howto -- cgit v1.2.1