Upravljanje z naprednimi in navadnimi uporabniki

@@ -37,34 +43,87 @@

Mageia is distributed via ISO images. This page will help you to choose - which image match your needs. + which image best suits your needs.

There is two families of media:

There are three types of installation media:

-
Classical installer: After booting the media, it will follow a process - allowing to choose what to install and how to configure your target - system. This give you the maximal flexibility for a customized installation, - in particular to choose which Desktop Environment you will install. +
Classical installer: Booting with this + media provides you with the maximum flexibility when choosing what to + install, and for configuring your system. In particular, you have a choice + of which Desktop environment to install.

LIVE media: you can boot the media in a real Mageia system without - installing it, to see what you will get after installation. The - installation process is simpler, but you get lesser choices. +

LIVE media: This option allows you to try + out Mageia without having to actually install it, or make any changes to + your computer. However, the Live media also includes an Installer, which can + be started when booting the media, or after booting into the Live operating + system itself. +

+ +

+ + + + + + + + +


	+ + The Live Installer is simpler compared to the Classical Installer - but you + have fewer configuration options. + + +

+ +

+ + + + + + + + +


	+ + Live ISOs can only be used to create “clean” installations, + they cannot be used to upgrade previously installed Mageia releases. + + +

+ +

+ +
Net Install: These are minimal ISO's + containing no more than that which is needed to start the DrakX installer + and find DrakX-installer-stage2 and other packages that + are needed to continue and complete the install. These packages may be on + the PC hard disk, on a local drive, on a local network or on the Internet. +
+ +
These media are very light (less than 100 MB) and are convenient if + bandwidth is too low to download a full DVD, or if you have a PC without a + DVD drive or is unable to boot from a USB stick.

Details are given in the next sections.

More details are given in the next sections.

@@ -72,7 +131,7 @@

Vir +

Vir

@@ -83,7 +142,7 @@

Definicija +

Definicija

@@ -91,11 +150,11 @@

Here, a medium (plural: media) is an ISO image file that allows you to - install and/or update Mageia and by extension any physical support the ISO - file is copied to. + install and/or update Mageia and, by extension, any physical medium (DVD, + USB stick, ...) the ISO file is copied to.

Najdete jih tukaj. +

Slike odtisov diska lahko najdete tukaj.

@@ -104,7 +163,7 @@

Mediji za klasično namestitev +

Mediji za klasično namestitev

@@ -115,7 +174,7 @@

Skupne značilnosti +

Skupne značilnosti

@@ -126,52 +185,36 @@

-
These ISOs use the traditional installer called drakx.
+
These ISOs use the Classical installer called DrakX
-
They are able to make a clean install or an update from previous releases.
+
They are used for performing clean installs or to upgrade a previously + installed version of Mageia +

- -

DVD -

- - -

-
Different media for 32 or 64 bit architectures.
+
Different media for 32 and 64-bit architectures
-
Some tools are available in the Welcome screen: Rescue System, Memory Test, - Hardware Detection Tool. -
+
Some tools are available in the Installer “Welcome” screen: + Rescue System, Memory Test, and Hardware + Detection Tool
-
Each DVD contains many available desktop environments and languages.
+
Each DVD contains many available desktop environments and languages
-
You'll be given the choice during the installation to add non free software.
+
You'll be given the choice during the installation to add non-free software

@@ -181,11 +224,11 @@

Live media +

Živi medij

@@ -196,7 +239,7 @@

Skupne značilnosti +

Skupne značilnosti

@@ -207,31 +250,29 @@

-
Can be used to preview the distribution without installing it on a HDD, and - optionally install Mageia on to your HDD. +
Can be used to preview the Mageia operating system without having to install + it
-
Each ISO contains only one desktop environment (KDE, GNOME or Xfce).
+
The Live media also includes an Installer.
-
Different media for 32 or 64 bit architectures.
+
Each ISO contains only one desktop environment (Plasma, GNOME or Xfce)
-
Live ISOs can only be used to create clean - installations, they cannot be used to upgrade from previous - releases.
+
Different media for 32 and 64-bit architectures
-
Vsebuje lastniško programsko opremo.
+
They contain non-free software

@@ -239,11 +280,11 @@

Live DVD Plasma +

Živi Plasma DVD

@@ -254,17 +295,17 @@

-
Plasma desktop environment only.
+
Plasma desktop environment only
-
Prisotni so vsi jeziki.
+
All available languages are present
-
Different media for 32 or 64 bit architectures.
+
64-bit architecture only

@@ -272,11 +313,11 @@

Live DVD GNOME +

Živi GNOME DVD

@@ -287,17 +328,17 @@

-
GNOME desktop environment only.
+
GNOME desktop environment only
-
Prisotni so vsi jeziki.
+
All available languages are present
-
Different media for 32 or 64 bit architectures.
+
64-bit architecture only

@@ -305,11 +346,11 @@

Live DVD Xfce +

Živi Xfce DVD

@@ -320,17 +361,17 @@

-
Xfce desktop environment only.
+
Xfce desktop environment only
-
Prisotni so vsi jeziki.
+
All available languages are present
-
Different media for 32 or 64 bit architectures.
+
32 or 64-bit architectures

@@ -340,11 +381,11 @@

Boot-only CD media +

Net install media

@@ -355,7 +396,7 @@

Skupne značilnosti +

Skupne značilnosti

@@ -366,30 +407,12 @@

-
Each one is a small image that contains no more than that which is needed to - start the drakx installer and find drakx-installer-stage2 and other packages - that are needed to continue and complete the install. These packages may be - on the PC hard disk, on a local drive, on a local network or on the - Internet. -
- -
- -
These media are very light (less than 100 MB) and are convenient when - bandwidth is too low to download a full DVD, a PC without a DVD drive or a - PC that can't boot from a USB stick. -
- -
- -
Different media for 32 or 64 bit architectures.
+
Different media for 32 and 64-bit architectures
-
samo angleščina.
+
First steps are English language only

@@ -401,7 +424,7 @@

netinstall.iso +

netinstall.iso

@@ -412,8 +435,8 @@

-
Contains only free software, for those people who refuse to use non-free - software. +
Contains only free software, for those who prefer to not use non-free + software

netinstall-nonfree.iso +

netinstall-nonfree.iso

@@ -437,9 +460,7 @@

-
Contains non-free software (mostly drivers, codecs...) for people who need - it. -
+
Contains non-free software (mostly drivers, codecs...) for those who need it

@@ -455,7 +476,7 @@

Downloading and Checking Media +

Downloading and Checking Media

@@ -466,7 +487,7 @@

Prejemanje +

Prejemanje

@@ -474,93 +495,119 @@

Once you have chosen your ISO file, you can download it using either http or - BitTorrent. In both cases, a window gives you some information, such as the - mirror in use and the possibility to change if the bandwidth is to low. If - http is chosen, you may also see something like + BitTorrent. In both cases, you are provided with some information, such as + the mirror in use and an option to switch to an alternative if the bandwidth + is too low.

If http is chosen you will also see some information regarding checksums.

+ -

md5sum and sha1sum are tools to check the ISO integrity. Use only one of - them. Keep one of them for further - usage. Then this window appears: +

md5sum, sha1sum and + sha512sum (the most secure) are tools to check the ISO + integrity. Copy one of the checksums (string of alphanumeric characters) for + use in the next section.

+ + +

In the meantime, a window to download the actual ISO will open:

+ -

Check the radio button Save File.

Click on Save File, then click OK. +

Checking the downloaded media integrity +

Checking the integrity of the downloaded media

Both checksums are hexadecimal numbers calculated by an algorithm from the - file to be downloaded. When you ask these algorithms to recalculate this - number from your downloaded file, either you have the same number and your - downloaded file is correct, or the number is different and you have a - failure. A failure infers that you should retry the download or attempt a - repair using BitTorrent. +

The checksums referred to earlier, are digital fingerprints generated by an + algorithm from the file to be downloaded. You may compare the checksum of + your downloaded ISO against that of the original source ISO. If the + checksums do not match, it means that the actual data on the ISO's do not + match, and if that is the case, then you should retry the download or + attempt a repair using BitTorrent.

Open a console, no need to be root, and:

- -

- To use md5sum, type: [sam@localhost]$ md5sum - path/to/the/image/file.iso. +

To generate the checksum for your downloaded ISO, open a console, (no need + to be root), and:

- To use sha1sum, type: [sam@localhost]$ sha1sum - path/to/the/image/file.iso. -

+ +
To use the md5sum, type: md5sum + path/to/the/image/file.iso
+ +
+ +
To use the sha1sum, type: sha1sum + path/to/the/image/file.iso
+ +
+ +
To use the sha512sum, type: sha512sum + path/to/the/image/file.iso
+ +

and compare the obtained number on your computer (you may have to wait for a - while) with the number given by Mageia. Example: -

Primer:

+ -

then compare the result (you may have to wait for a while) with the ISO + checksum provided by Mageia. +

Burn or dump the ISO +

Zapecite ali prenesite odtis diska

The checked ISO can now be burned to a CD or DVD or dumped to a USB - stick. These operations are not a simple copy and aim to make a bootable - medium. +

The verified ISO can now be burned to a CD/DVD or “dumped” to a + USB stick. This is not a standard copy operation, as a bootable medium will + actually be created.

Burning the ISO to a CD/DVD +

Burning the ISO to a CD/DVD

Use whatever burner you wish but ensure the burning device is set correctly - to burn an image, burn data or files is not - correct. There is more information in the Mageia - wiki. +

Whichever software you use, ensure that the option to burn an + image is used. Burn data or + files is NOT correct. See the the Mageia + wiki for more information.

@@ -569,15 +616,15 @@

Odlaganje odtisa nosilca za namestitev na ključek USB +

Odlaganje odtisa nosilca za namestitev na ključek USB

All Mageia ISOs are hybrids, which means you can 'dump' them to a USB stick - and then use it to boot and install the system. +

All Mageia ISOs are hybrids, which means you can dump them to a USB stick + and then use that to boot and install the system.

@@ -589,9 +636,8 @@ -

Odlaganje odtisa nosilca za namestitev na ključek USB izbriše vse njegove - datotečne sisteme. Navidezna velikost naprave bo omejena na velikost - odtisa. Izgubili boste vse podatke na njem. +

Dumping an image onto a flash device destroys any previous file-system on + the device and all existing data will be lost.

@@ -599,15 +645,35 @@

To recover the original capacity, you must redo partitioning and re-format - the USB stick. -

+ + + + + + + + +

+ +

Also, the only partition on the flash device will then just be the Mageia + ISO partition. +

+ +

So, if an ISO of about 4GB is written to an 8GB USB stick, the stick will + then only show up as 4GB. This is because the remaining 4GB is no longer + formatted - hence not currently available for use. To recover the original + capacity, you must reformat and repartition the USB stick. +

+ +

Using a graphical tool within Mageia +

Using a graphical tool within Mageia

@@ -622,7 +688,7 @@

Using a graphical tool within Windows +

Using a graphical tool within Windows

@@ -631,20 +697,31 @@

Lahko poskusite:

- Rufus z uporabo - možnosti "ISO image" "ISO slika" ; -

- -

- Win32 - Disk Imager

+ +
Rufus using the + "ISO image" option +
+ +
+ +
Win32 Disk + Imager
+ +

Using Command line within a GNU/Linux system +

Using the Command line within a GNU/Linux system

@@ -660,8 +737,8 @@ -

It is potentially *dangerous* to do this by hand. You risk to overwrite a - disc partition if you get the device-ID wrong. +

It is potentially *dangerous* to do this by hand. You risk overwriting + potentially valuable existing data if you specify the wrong target device.

@@ -669,8 +746,6 @@

You can also use the dd tool in a console:

@@ -680,27 +755,36 @@
-
Become root with the command su - (don't forget the - final '-' ) +
Become a root (Administrator) user with the command + su - (don't forget the - )
-
Plug in your USB stick (do not mount it, this also means do not open any - application or file manager that could access or read it) +
Plug in your USB stick - but do not mount it (this also means do not open + any application or file manager that could access or read it)
-
Enter the command fdisk -l
+
Enter the command fdisk -l
+ +
+ +
Find the device name for your USB stick (by its size), for example + /dev/sdb in the screenshot above, is an 8GB USB stick. +
-
Alternatively, you can get the device name with the command - dmesg: at end, you see the device name starting with - sd, and sdd in this case: +
Alternatively, you can find the device name with the command + dmesg. Towards the end of the following example, you can + see the device name starting with sd, and in this case, + sdd is the actual device. You can also see that its + size is 2GB:
```
[72594.604531] usb 1-1: new high-speed USB device number 27 using xhci_hcd
 [72594.770528] usb 1-1: New USB device found, idVendor=8564, idProduct=1000
@@ -723,30 +807,43 @@
                                      
```
-
Find the device name for your USB stick (by its size), for example - /dev/sdb in the screenshot above, it is a 8GB USB stick. -
- -

Enter the command: dd if=path/to/the/ISO/file + of=/dev/sdX bs=1M

Enter the command: # dd if=path/to/the/ISO/file of=/dev/sdX - bs=1M

Where X=your device name eg: + /dev/sdd

Where X=your device name eg: /dev/sdc

Example:dd if=/home/user/Downloads/Mageia-6-x86_64-DVD.iso + of=/dev/sdd bs=1M

Example: # dd if=/home/user/Downloads/Mageia-4-x86_64-DVD.iso - of=/dev/sdb bs=1M

+ + + + + + + + +


	+ + It might be helpful to know that if stands + for input file and of stands + for output file + + +

-
Enter the command: # sync
+
Enter the command: sync
-
Unplug your USB stick, it is done
+
This is the end of the process, and you may now unplug your USB stick.

diff --git a/sl/acceptLicense.html b/sl/acceptLicense.html index eba7072..3577202 100644 --- a/sl/acceptLicense.html +++ b/sl/acceptLicense.html @@ -38,6 +38,12 @@ + + + + + + @@ -57,25 +63,35 @@ -

Pred namestitvijo Mageje pozorno preberite - licenčne pogoje. -

- - -

Ti licenčni pogoji se nanašajo na celotno distribucijo - Mageia. Pred nadaljevanjem jih je potrebno - sprejeti. -

- - -

Za sprejem preprosto označite Sprejmem in kliknite - gumb Naprej. -

+ +
Before installing Mageia, please read the license terms and conditions + carefully. +
+ +
+ +
These terms and conditions apply to the entire Mageia distribution and must + be accepted before you can continue. +
+ +
+ +
To proceed, simply select Accept and then click on + Next
+ +

Zahvaljujemo se za vaš ogled tudi če se odločite, da teh pogojev ne boste - sprejeli. S klikom na gumb Izhod se bo vaš računalnik - ponovno zagnal. +

If you decide not to accept these conditions, then we thank you for your + interest in Mageia. Clicking Quit will reboot your + computer.

@@ -99,9 +115,8 @@ -

Za to izdajo distribucije Mageia so na voljo - pomembne informacije, dosegljive s klikom na gumb Opombe ob - izdaji. +

Important information about this particular Mageia release can be viewed by + clicking on the Release Notes button.

diff --git a/sl/addUser.html b/sl/addUser.html index 8abcb79..165a0f7 100644 --- a/sl/addUser.html +++ b/sl/addUser.html @@ -2,29 +2,40 @@ - Upravljanje z naprednimi in navadnimi uporabniki + User Management - - -

Upravljanje z naprednimi in navadnimi uporabniki +

User Management

+ + + + + + + + + + +

@@ -36,14 +47,17 @@

+ -

V vseh namestitvah Mageje je priporočljivo - nastaviti geslo skrbnika, v Linux-u znan kot geslo root - uporabnika. Med tipkanjem gesla v polje se bo barva ščita - spremenila glede na moč gesla od rdeče do rumene in pri močnem geslu - zelene. Zaradi preverjanja pravilnosti vnosa morate geslo ponoviti v polju - niže. +

It is advisable for all Mageia installations to set a + superuser (Administrator) password, usually called the + root password in Linux. As you type a password into the + top box a shield will change from red-to-yellow-to-green depending on the + strength of the password. A green shield shows you are using a strong + password. You need to repeat the same password in the box underneath, to + check that the first entry was not mistyped.

@@ -54,8 +68,8 @@ @@ -64,6 +78,7 @@ +

@@ -75,51 +90,60 @@

+ -

Tukaj dodajte uporabnika. Imel bo manj pravic kot skrbnik (root), a dovolj - za uporabo spleta, pisarniških programov, igranje iger in vse ostalo kar - običajni uporabnik počne z računalnikom. +

Add a User here. A regular user has fewer privileges than the + superuser (root), but enough to use the Internet, office + applications or play games and anything else the average user might use a + computer for.

-
Ikona: s klikom na ta gumb je možno spremeniti ikono - oz. sliko uporabnika. -
+
Icon
+ + +
Click on this button if you want to change the user's icon
-
Pravo ime: tukaj vnesite pravo ime uporabnika. -
+
Real Name
+ + +
Insert the user's real name into this text box
-
Prijavno ime: Tukaj vnesete prijavno ime uporabnika ali - pustite programu drakx uporabiti verzijo pravega imena - uporabnika. Prijavno ime razlikuje med velikostjo črk.
+
Login Name
+ + +
Enter the user login name or let DrakX use a version of the user's real + name. The login name is case-sensitive.
-
Geslo: Tukaj vnesite uporabniško geslo. Med tipkanjem - gesla v polje se bo barva ščita desno spremenila glede na moč gesla od rdeče - do rumene in pri močnem geslu zelene. (Glejte tudi Opomba) +
Password
+ + +
Type in the user password. There is a shield at the end of the text box that + indicates the strength of the password. (See also Opomba)
- -
+ -
Geslo (ponovno): Program drakx preverja pravilnost - vnosa, zato morate vnos gesla ponoviti. +
Password (again): Retype the user + password. DrakX will check that you have not mistyped the password.

Vsa gesla so občutljiva na velikost črk. Najbolje je v njem uporabiti - mešanico velikih ter malih črk, številk in posebnih znakov. +

All passwords are case-sensitive. It is best to use a mixture of letters + (upper and lower case), numbers and other characters in a password.

@@ -130,14 +154,16 @@ diff --git a/sl/securityLevel.html b/sl/securityLevel.html index 6d10fe2..46a4ef9 100644 --- a/sl/securityLevel.html +++ b/sl/securityLevel.html @@ -7,7 +7,7 @@ - -

Select mouse +

Izberite miško

+ - - - + + + + -

If you are not happy with how your mouse responds, you can select a different one here.

- -

Usually, Universal - Any PS/2 and USB - mice is a good choice. + +

Usually, Universal → Any PS/2 and + USB mice is a good choice.

Select Universal - Force evdev to - configure the buttons that do not work on a mouse with six or more buttons. +

Select Universal → Force + evdev to configure the buttons that do not work + on a mouse with six or more buttons.

diff --git a/sl/setupBootloader.html b/sl/setupBootloader.html index 0c074a6..bda55e1 100644 --- a/sl/setupBootloader.html +++ b/sl/setupBootloader.html @@ -2,26 +2,38 @@ - Glavne možnosti zagonskega nalagalnika + Bootloader - - -

Glavne možnosti zagonskega nalagalnika +

Bootloader

+ + + + + + + + + + + + @@ -29,11 +41,11 @@ -

Bootloader interface +

Grub2

@@ -41,145 +53,61 @@ -

By default, Mageia uses exclusively:

- - -

Grub2 on Legacy MBR/GPT systems

-
Grub2 (with or without graphical menu) for a Legacy/MBR or Legacy/GPT system
+
GRUB2 (with or without graphical menu) will be used exclusively as the + bootloader for a Legacy/MBR or Legacy/GPT system. +
-
Grub2-efi for a UEFI system.
+
By default, a new bootloader will be written into either the MBR (Master + Boot Record) of your first hard drive or in the BIOS boot partition. +

Vsak uporabnik, dodan med namestitvijo Mageje, bo imel domačo mapo zaščiteno - tako pred branjem kot tudi pisanjem (umask=0027) +

Any users added while installing Mageia, will have a home directory that is + both read and write protected (umask=0027)

Več uporabnikov je med namestitvijo možno dodati v koraku Nastavitve - povzetek. Izberite Upravljanje uporabnikov.

Dovoljenje dostopa lahko spremenite tudi po namestitvi

@@ -147,74 +173,46 @@ + -

Napredno upravljanje z uporabniki +

User Management (advanced)

+ -

S klikom na gumb Napredno lahko urejate nastavitev za - tega dodanega uporabnika. +

The Advanced option allows you to edit further settings + for the user you are adding.

- -

Dodatno lahko onemogočite ali omogočite prijavo gosta.

- -

- - - - - - - - -


	- - Anything a guest with a default rbash guest account - saves to his /home directory will be erased when he logs out. The guest - should save his important files to a USB key. - - -

-
Enable guest account: Here you can enable or disable a - guest account. The guest account allows a guest to log into and use the PC, - but he has more restricted access than normal users. -
- -
- -
Shell: This drop down list allows you to change the - shell used by the user you are adding in the previous screen, options are - Bash, Dash and Sh -
+
Shell: This drop-down list allows you to change the + shell available to any user you added in the previous screen. Options are + Bash, Dash and Sh
-
User ID: Here you can set the user ID for the user you - are adding in the previous screen. This is a number. Leave it blank unless - you know what you are doing. +
User ID: Here you can set the user ID for any user you + added in the previous screen. If you are unsure what the purpose of this is, + then leave it blank.
-
Group ID: This lets you set the group ID. Also a - number, usually the same one as for the user. Leave it blank unless you know - what you are doing. +
Group ID: This lets you set the group ID. Again, if + unsure, leave it blank.

Partitioning +

+ + + + + + +

Suggested Partitioning +

+ + + + + + + + + + + + + + + + + +

In this screen you can see the content of your hard drive(s) along with the + DrakX partitioning proposals for where to install Mageia. +

+ + +

The actual options available from those shown below will vary according to + the layout and content of your particular hard drive(s). +

+ + + + +

Main Options

+ +
Use Existing Partitions
+ + +
If this option is available, then existing Linux compatible partitions have + been found and may be used for the installation. +
+ +
+ +
Use Free Space
+ + +
If you have unused space on your hard drive then this option will use it for + your new Mageia installation. +
+ +
+ +
Use Free Space on a Windows Partition
+ + +
If you have unused space on an existing Windows partition, the installer may + offer to use it. This can be a useful way of making room for your new Mageia + installation, but is a risky operation so you should make sure you have + backed up all important files! +
+ + +
With this option, the installer displays the remaining Windows partition in + light blue and the proposed Mageia partition in dark blue with their + intended sizes just underneath. You have the option to modify these sizes by + clicking and dragging the gap between both partitions. See the following + screenshot: +
+ +

+ +

Erase and use Entire Disk

+ + +

This option will allocate the entire drive for Mageia +

+ + +

+ + + + + + + + +


	+ + This will erase ALL data on the selected hard drive. Take care! If you + intend to use part of the disk for something else, or you already have data + on the drive that you are not prepared to lose, then do not use this option. + + +

+ + +

+ + + + + + + + +

+ +

Note that this involves shrinking the size of the Windows partition. The + partition must be "clean", meaning that Windows must have closed down + correctly the last time it was used. It must also have been defragmented, + although this is not a guarantee that all files in the partition have been + moved out of the area that is about to be used. It is highly recommended to + back up your personal files. +

+ +

+ +
Custom Disk Partitioning
+ + +
S tem imate popoln nadzor nad namestitvijo na (enem ali več) vaših diskov. +
+ +

+ + + + +

If you are not using the Custom disk partitioning + option, then the installer will allocate the available space according to + the following rules: +

+ + +

+ +
If the total available space is less than 50 GB, then only one partition is + created. This will be the / (root) partition. +
+ +
+ +
Če je vsega razpoložljivega prostora na voljo več kot 50 GB, bodo ustvarjeni + trije razdelki +
+ + +
+
- + +
  6/19 of the total available place is allocated to / + with a maximum of 50 GB +
  + +
- + +
  1/19 is allocated to swap with a maximum of 4 GB +
  + +
- + +
  the rest (at least 12/19) is allocated to /home
  + +
+
+ +

+ + +

This means that from 160 GB or greater available space, the installer will + create three partitions: +

+ + +

+ +
50 GB for /
+ +
+ +
4 GB for swap
+ +
+ +
and the remainder for /home
+ +

+ + +

+ + + + + + + + +

+ +

If you are using a UEFI system, the ESP (EFI System Partition) will be + automatically detected - or created if it does not exist yet - and mounted + on /boot/EFI. The Custom disk + partitioning option is the only one that allows to check it has + been correctly done. +

+ + +

If you are using a Legacy (also known as BIOS) system with a GPT partitioned + disk, you need to create a BIOS boot partition if it doesn't already + exist. It should be about 1 MiB with no mount point. It can be created with + the Installer, under Custom disk partitioning, like any + other partition. Be sure to select “BIOS boot partition” for + filesystem type. +

+ + +

See DiskDrake for information on how to proceed. +

+ +

+ + + + + + +

+ + + + + + + + +

+ +

Some newer drives are now using 4096 byte logical sectors, instead of the + previous standard of 512. Due to lack of available hardware, the + partitioning tool used in the installer has not been tested with such a + drive. +

+ + +

Some SSD devices now use an erase block size over 1 MB. If you have such a + device we suggest that you partition the drive in advance, using an + alternative partitioning tool like gparted, and to use the following + settings: +

+ + +

+ +
Align to = MiB +
+ +
+ +
Free space preceding (MiB) = 2 +
+ +

+ + +

Also make sure all partitions are created using an even number of megabytes.

+ +

+ + +

Izberite priklopne točke +

+ + + + + + + + + + + + + + + + + + + + + + + + + + + +

Here you see the Linux partitions that have been found on your computer. If + you don't agree with the DrakX suggestions, you can change the mount points + yourself. +

+ + +

+ +
To the left of the drop-down menus is a list of available partitions. For + example: sda is a hard drive - and + 5 is a partition number, followed + by the (capacity, mount point, filesystem type) of the + partition. +
+ +
+ +
If you have several partitions, you can choose various different + mount points from the drop down menu, such as + /, /home and + /var. You can even make your own mount points, for + instance /video for a partition where you want to store + your films, or perhaps /Data for all your data files. +
+ +
+ +
For any partitions that you don't need to make use of, you can leave the + mount point field blank. +
+ +

+ + +

+ + + + + + + + +


	+ + If you make any changes here, ensure you still have a `/` + (root) partition. + + +

+ + +

+ + + + + + + + +


	+ + If you are not sure what to choose, click Previous to + go back and then tick Custom disk partitioning, where + you can click on a partition to see its type and size. + + +

+ + +

If you are sure the mount points are correct, click on + Next, and choose whether you only want to format the + partition suggested by DrakX, or more. +

+ +

+ + +

Potrdi formatiranje trdega diska +

+ + + + + + + + + + + + + + + + + +

+ +
Click on Previous if you are at all unsure about your + choice. +
+ +
+ +
Click on Next to proceed if you are sure that it is OK + to erase every partition, every operating system and all + data that might be on that hard disk. +
+ +

+ +

+ + +

Custom Disk Partitioning with DiskDrake +

+ + + + + + + + + + + + + + + +

+ +
Modify the layout of your disk(s) here. You can remove or create partitions, + change the filesystem or size of a partition and even view their details + before you start. +
+ +
+ +
There is a tab at the top for every detected hard disk (or other storage + device, like a USB key). In the screenshot above there are two available + devices: sda and sdb. +
+ +
+ +
For all other actions: click on the desired partition first. Then view it, + or choose a filesystem and a mount point, resize it or wipe + it. Expert mode provides more options such as to label + (name) a partition, or to choose a partition type. +
+ +
+ +
Continue until you have adjusted everything to your satisfaction, then click + Done when you're ready. +
+ +

+ + +

+ + + + + + + + +


	+ + + + + + Take care with the Clear all option, use it only if you + are sure you want to wipe all partitions on the selected storage device. + + + + + + If you wish to use encryption on your `/` partition you + must ensure that you have a separate `/boot` + partition. The encryption option for the `/boot` + partition must NOT be set, otherwise your system will be unbootable. + + + + + + +

+ + +

+ + + + + + + + +


	+ + + + + + If you are installing Mageia on a UEFI system, check that an ESP (EFI System + Partition) is present and correctly mounted on + `/boot/EFI`. See Figure 1 below. + + + + + + If you are installing Mageia on a Legacy/GPT system, check that a BIOS boot + partition is present and of the correct type. See Figure 2 below. + + + + + + +

+ + + + + +

+ + +

Formatiranje +

+ + + + + + + + + + + + + + + +

Here you can choose which partition(s) you wish to format. Any data on + partitions not marked for formatting will be preserved. +

+ + +

Usually, at least the partitions that DrakX selected need to be formatted. +

+ + +

Click on Advanced to choose the partitions you want to + check for so-called bad blocks

+ + +

+ + + + + + + + +


	+ + If you're not sure you have made the right choice, you can click on + Previous, again on Previous and + then on Custom to get back to the main screen, where + you can choose to view details of your partitions. + + +

+ + +

When you are confident about the selections, click on + Next to continue. +

+ +

+ + + + @@ -29,14 +33,13 @@ -

You have finished installing and configuring - Mageia and it is now safe to remove the - installation medium and reboot your computer. +

You have finished installing and configuring Mageia and it is now safe to + remove the installation medium and reboot your computer.

After reboot, in the bootloader screen, you can choose between the operating - systems on your computer (if you have more than one). +

After rebooting, you can use the bootloader screen to choose which operating + system to start (if there are more than one on your computer).

@@ -49,8 +52,8 @@

Visit www.mageia.org if you have any questions or want to contribute to - Mageia +

Visit www.mageia.org/en/ + if you have any questions or want to contribute to Mageia

diff --git a/sl/firewall.html b/sl/firewall.html new file mode 100644 index 0000000..36196ef --- /dev/null +++ b/sl/firewall.html @@ -0,0 +1,95 @@ + + + + + Požarni zid + + + + + + +

Požarni zid +

+ + + + + + + +

This section allows you to configure some simple firewall rules: they + determine which type of message from the Internet will be accepted by the + target system. This, in turn, allows the corresponding services on the + system to be accessible from the Internet. +

+ + +

In the default setting (no button is checked), no service of the system is + accessible from the network. The Everything (no + firewall) option enables access to all services of the machine - + an option that does not make much sense in the context of the installer + since it would create a totally unprotected system. Its veritable use is in + the context of the Mageia Control Center (which uses the same GUI layout) + for temporarily disabling the entire set of firewall rules for testing and + debugging purposes. +

+ + +

All other options are more or less self-explanatory. As an example, you will + enable the CUPS server if you want printers on your machine to be accessible + from the network. +

+ + +

Napredno

+ + +

The Advanced option opens a window where you can enable + a series of services by typing a list of “couples” (blank + separated) +

+ + +

<številka-vrat>/<protokol>

+ + + + + + + + + +

- <port-number> is the value of the port assigned to + the service you want to enable (e.g. 873 for the RSYNC service) as defined + in RFC-433; +

- <protocol> is one of TCP or + UDP - the internet protocol that is used by the + service. +

+ + +

For instance, the entry for enabling access to the RSYNC service therefore + is 873/tcp. +

+ + +

In case a service is implemented to use both protocols, you specify 2 + couples for the same port. +

+ +

+ + diff --git a/sl/graphicalConfiguration.html b/sl/graphicalConfiguration.html new file mode 100644 index 0000000..7b7df0b --- /dev/null +++ b/sl/graphicalConfiguration.html @@ -0,0 +1,372 @@ + + + + + Graphical Configuration + + + + + + +

Graphical Configuration +

+ + + + + +

Nastavitev grafične kartice in monitorja +

+ + + + + + + + + + + + + + + +

No matter which graphical environment (also known as desktop environment) + you chose for this install of Mageia, they are all based on a graphical user + interface system called X Window System, or simply + “X”. So in order for KDE Plasma, GNOME, LXDE or any other + graphical environment to work well, the following “X” settings + need to be correct. +

+ + +

Choose the appropriate settings manually if you think the details are + incorrect, or if none are shown. +

+ + +

+ +
Graphic Card
+ + +
If you need to, you can select a specific card from this expandable + list. See “Izberite strežnik X ()nastavite grafično kartico”. +
+ +
+ +
Monitor
+ + +
You can choose Plug 'n Play, if applicable, or choose your monitor from the + Vendor or Generic lists. Choose + Custom if you prefer to manually set the horizontal and + vertical refresh rates of your monitor. See “Izberite vaš zaslon”. +
+ +
+ +
Resolution
+ + +
The resolution and color depth of your monitor can be set here.
+ +
+ +
Test
+ + +
The test button does not always appear during install. If the option is + there, and you test your settings, you should be asked to confirm that your + settings are correct. If you answer Yes, the settings + will be kept. If you don't see anything, you'll return to the configuration + screen and be able to reconfigure everything until the test result is + satisfactory. If the test option is not available, then make sure your + settings are on the safe side. +
+ +
+ +
Options
+ + +
Here you can choose to enable or disable various options.
+ +

+ + +

+ + + + + + + + +


	+ + There is a risk of damaging a monitor if you choose refresh rates that are + outside the frequency range of that monitor. This applies to older CRT + displays: modern monitors will reject an unsupported frequency and normally + enter standby mode. + + +

+ +

+ + +

Izberite strežnik X ()nastavite grafično kartico +

+ + + + + + + + + + + + + + + + + + + +

DrakX has a very comprehensive database of video cards and will usually + correctly identify your video device. +

+ + +

If the installer has not correctly detected your graphic card and you know + which one you have, you can select it from the tree by: +

+ +
Vendor
+ +
+ +
then the make of your card
+ +
+ +
and the model of card
+ +

+ + +

If you cannot find your card in the vendor lists (because it's not yet in + the database or it's an older card) you may find a suitable driver in the + Xorg category, which provides more than 40 generic and + open source video card drivers. If you still can't find a specific driver + for your card there is the option of using the VESA driver which provides + basic capabilities. +

+ + +

+ + + + + + + + +


	+ + Be aware that if you select an incompatible driver you may only have access + to the Command Line Interface + +

+ + +

Some video card manufacturers provide proprietary drivers for Linux which + may only be available in the Nonfree repository and in + some cases only from the card manufacturers' websites. The + Nonfree repository needs to be explicitly enabled to + access them. If you didn't enable it previously, you should do this after + your first reboot. +

+ +

+ + +

Izberite vaš zaslon +

+ + + + + + + + + + + + + + + +

DrakX has a very comprehensive database of monitors and will usually + correctly identify yours. +

+ + +

+ + + + + + + + +


	+ + Selecting a monitor with different characteristics + could damage your monitor or video hardware. Please don't try something + without knowing what you are doing. If in doubt you should + consult your monitor documentation. + + +

+ + + + +

Custom

+ +

This option allows you to set two critical parameters: the vertical refresh + rate and the horizontal sync rate. Vertical refresh determines how often the + screen is refreshed and horizontal sync is the rate at which scan lines are + displayed. +

+ + +

It is VERY IMPORTANT that you do not specify a monitor + type with a sync range that is beyond the capabilities of your monitor: you + may damage your monitor. If in doubt, choose a conservative setting and + consult your monitor documentation. +

+ +

Plug'n Play

+ +

This is the default option and automatically tries to determine the monitor + type from the monitor database. +

+ +

Vendor

+ +

If the installer has not correctly detected your monitor and you know which + one you have, you can select it from the tree by selecting: +

+ +

+ + +

+ +
Manufacturer
+ +
+ +
Monitor model
+ +

+ + +

Generic: + +
Selecting this group will list nearly 30 display configurations such as + 1024x768 @ 60Hz and includes flat-panel displays as used in laptops. This is + often a good monitor selection group if you need to use the VESA card driver + when your video hardware cannot be determined automatically. Once again it + may be wise to be conservative in your selections. +
+ +

+ +

+ + diff --git a/sl/index.html b/sl/index.html index 64411ff..bd34f62 100644 --- a/sl/index.html +++ b/sl/index.html @@ -27,16 +27,17 @@

Predstavitev
Vir
Downloading and Checking Media
Burn or dump the ISO
Vir
Downloading and Checking Media
Zapecite ali prenesite odtis diska

DrakX, namestitveni program Mageje

Namestitveni koraki
Težave z namestitvijo in možne rešitve
Namestitveni koraki
Prikaz dobrodošlice namestitve
Težave z namestitvijo in možne rešitve

Izberite jezik namestitve

@@ -50,40 +51,51 @@

Nastavitev naprav SCSI

Namestitev ali nadgradnja

Tipkovnica

Razdelitev diska

Izberite priklopne točke

Confirm hard disk to be formatted

Razdeljevanje diska po meri s programom DiskDrake

Formatiranje

Izbira virov (nastavitev dodatnih virov namestitve)

Izbira virov z lastniško programsko opremo (Nonfree)

Izbira namizja

Izbira skupin paketov

Minimalna namestitev

Izbira posamičnih paketov

Upravljanje z naprednimi in navadnimi uporabniki

Partitioning

Suggested Partitioning
Izberite priklopne točke
Potrdi formatiranje trdega diska
Custom Disk Partitioning with DiskDrake
Formatiranje

Software

Media Selection
Izbira namizja
Izbira skupin paketov
Minimalna namestitev
Izbira posamičnih paketov

User Management

Nastavite geslo skrbnika (uporabnika root):
Dodajte uporabnika
Napredno upravljanje z uporabniki
User Management (advanced)

Graphical Configuration

Nastavitev grafične kartice in monitorja
Izberite strežnik X ()nastavite grafično kartico
Izberite vaš zaslon

Nastavitev grafične kartice in monitorja

Choose an X Server (Configure your Graphic Card)

Izberite vaš zaslon

Glavne možnosti zagonskega nalagalnika

Bootloader

Bootloader interface
Using a Mageia bootloader
Using an existing bootloader
Using chain loading
Možnosti
Grub2
Bootloader Setup
Other Options

Add or Modify a Boot Menu Entry

Povzetek raznih nastavitev

Configuration Summary

Sistemske nastavitve
Varnost

Nastavite vaš časovni pas

Izbor države/regije

Locale

Način vnosa
Nastavite vaš časovni pas
Izbor države/regije

Nastavite vaše storitve

Select mouse

Izberite miško

Nastavitve zvoka

@@ -108,33 +120,16 @@

Howto

- - - - - - - - - - - - - @@ -152,29 +147,37 @@ - - - + + + + + + + + + + + @@ -187,7 +190,6 @@ - @@ -197,17 +199,20 @@ - - - + + + + + + diff --git a/sl/installUpdates.html b/sl/installUpdates.html index 2fd7dd0..9cd73d2 100644 --- a/sl/installUpdates.html +++ b/sl/installUpdates.html @@ -6,7 +6,7 @@ - + + +

Locale +

+ + + +

Nastavite vaš časovni pas +

+ + + + + + + + + + + + + +

+ +
Choose your timezone by choosing your country, or a city close to you in the + same timezone. +
+ +

+ + +

In the next screen you can choose to set your hardware clock to local time + or to GMT, also known as UTC. +

+ + +

+ + + + + + + + +


	+ + If you have more than one operating system on your computer, make sure they + are all set to local time, or all to UTC/GMT. + + +

+ +

+ + +

Izbor države/regije +

+ + + + + + + + + + + +

+ +
Select your country or region. This is important for all kinds of settings, + like the currency and wireless regulatory domain. Setting the wrong country + can lead to being unable to use a Wireless network. +
+ +
+ +
If your country isn't in the list, click the Other + Countries option and choose your country / region there. +
+ +

+ + +

+ + + + + + + + +


	+ + If your country is only in the Other Countries list, + after clicking OK it may seem that a country from the + main list was chosen. Despite this, DrakX will actually apply your choice. + + +

+ + +

Način vnosa +

+ + + +

In the Other Countries screen you can also select an + input method (at the bottom of the list). Input methods allow users to input + multilingual characters (Chinese, Japanese, Korean, etc). IBus is the + default input method, so users should not need to configure it + manually. Other input methods (SCIM, GCIN, HIME, etc) also provide similar + functions and can be installed if you added HTTP/FTP media before package + selection. +

+ + +

+ + + + + + + + +


	+ + If you missed the input method setup during installation, you can access it + post-install via Configure your Computer → System, or by running + localedrake as root. + + +

+ +

+ + diff --git a/sl/misc-params.html b/sl/misc-params.html index 520c03f..8a3d579 100644 --- a/sl/misc-params.html +++ b/sl/misc-params.html @@ -2,22 +2,22 @@ - Povzetek raznih nastavitev + Configuration Summary - - -

Povzetek raznih nastavitev +

Configuration Summary

@@ -29,10 +29,20 @@ -

DrakX made smart choices for the configuration of your system depending on - the choices you made and on the hardware DrakX detected. You can check the - settings here and change them if you want after pressing - Configure. + + + + + + + + + + +

DrakX presents a proposal for the configuration of your system depending on + the choices you made and on the hardware detected. You can check the + settings here and change them if you want by pressing + Configure.

@@ -45,24 +55,24 @@

As a general rule, default settings are recommended and you can keep them - with 3 exceptions: +

Splošno pravilo je, da je najbolje sprejeti privzete vrednosti, razen v + primerih:

-
there are known issues with a default setting
+
s privzetimi vrednostmi je nekaj že znanih težav,
-
the default setting has already been tried and it fails
+
privzete vrednosti niso dale želenega rezultata ali
-
something else is said in the detailed sections below
+
some other factor mentioned in the detailed sections below is an issue

@@ -90,65 +100,61 @@

-
Časovni pas
+
Timezone
-
DrakX selected a time zone for you, depending on your preferred - language. You can change it if needed. See also “Nastavite vaš časovni pas”
+
DrakX selects a timezone for you, depending on your preferred language. You + can change it if needed. See also Configure Timezone
-
Država
+
Country / Region
-
If you are not in the selected country, it is very important that you - correct the setting. See “Izbor države/regije”
+
If the selected country is wrong, it is very important that you correct the + setting. See Select Country
-
Zagonski nalagalnik
+
Bootloader
-
DrakX has made good choices for the bootloader setting. +
DrakX proposal for the bootloader setting
-
Do not change anything, unless you know how to configure Grub2 -
+
Do not change anything, unless you know how to configure GRUB2. For more + information, see Bootloader
-
Za več informacij poglejte “Glavne možnosti zagonskega nalagalnika”
+
-
Upravljanje z uporabniki
+
User management
-
You can add extra users here. They will each get their own - /home directories. +
You can add extra users here. They will each be allocated their own + /home directories.
-
Storitve: -
+
Services
-
System services refer to those small programs which run the background - (daemons). This tool allows you to enable or disable certain tasks. +
System services refer to those small programs which run in the background + (daemons). This tool allows you to enable or disable certain processes.

You should check carefully before changing anything here - a mistake may - prevent your computer from operating correctly. -
- - -
Za več informacij poglejte “Nastavite vaše storitve”
+ prevent your computer from operating correctly. For more information, see + Configure Services

@@ -173,12 +179,11 @@

-
Tipkovnica: -
+
Keyboard
-
This is where you setup or change your keyboard layout which will depend on - your location, language or type of keyboard. +
Configure your keyboard layout according to your location, language and type + of keyboard.
@@ -203,8 +208,7 @@
-
Miška: -
+
Mouse

Here you can add or configure other pointing devices, tablets, trackballs @@ -214,29 +218,31 @@
-
Zvočna kartica: +
Sound card
+ + +
The installer will use the default driver if one is available.
-
The installer uses the default driver, if there is a default one. The option - to select a different driver is only given when there is more than one - driver for your card, but none of them is the default one. +
If there is no actual default driver for your sound card, there may be other + possible alternative drivers available to choose from. If this is the case, + but you think the installer has not made the most appropriate choice, you + can click on Advanced to manually specify a driver.
-
Grafični vmesnik: -
+
Graphical interface
-
V tem delu lahko nastavljate (eno ali več) grafičnih kartic in zaslonov. -
+
This section allows you to configure your graphics card(s) and displays. For + more information, see “Nastavitev grafične kartice in monitorja”
-
Za več informacij poglejte “Nastavitev grafične kartice in monitorja”. -
+

@@ -262,13 +268,12 @@

-
Omrežje: -
+
Network

You can configure your network here, but for network cards with non-free - drivers it is better to do that after reboot, in the Mageia - Control Center, if you have not yet enabled the Nonfree media + drivers it is better to do that after reboot, using the Mageia Control + Center, if you have not yet enabled the Nonfree media repositories.
@@ -282,7 +287,7 @@

When you add a network card, do not forget to set your firewall to watch +

When you add a network card, do not forget to set your firewall to monitor that interface as well.

@@ -294,18 +299,17 @@

Posredniški strežniki: -

Proxies

A Proxy Server acts as an intermediary between your computer and the wider - internet. This section allows you to configure your computer to utilize a + Internet. This section allows you to configure your computer to utilize a proxy service.

You may need to consult your systems administrator to get the parameters you - need to enter here +

You may need to consult your systems administrator to obtain the parameters + you need to enter here.

@@ -331,33 +335,35 @@

-
Stopnja varnosti: -
- - -
Here you set the Security level for your computer, in most cases the default - setting (Standard) is adequate for general use. -
+
Security Level
-
Check the option which best suits your usage. +
The Security level for your computer, in most cases the default setting + (Standard) is adequate for general use. Select the option which best suits + your usage.
-
Požarni zid: +
Firewall
+ + +
The firewall allows you to manage which network connections are allowed on + your computer. The safe and secure default is to allow ZERO inbound + connections. This does not stop you connecting outbound and using your + computer normally.
-
A firewall is intended to be a barrier between your important data and the - rascals out there on the internet who would compromise or steal it. +
Please be aware that the Internet is a high risk network where there are + continuous attempts to probe and attack systems. Even seemingly + “safe” connections such as ICMP (for ping) have been used as + covert data channels for exfiltrating data by malicious persons.
-
Select the services that you wish to have access to your system. Your - selections will depend on what you use your computer for. For more - information, see ???. +
For more information, see Firewall.
@@ -370,7 +376,8 @@

Bear in mind that allowing everything (no firewall) may be very risky. +

Bear in mind that allowing everything (no firewall) may + be very risky.

- - - - - - - -


	- - The Mageia graphical menus are nice : - -

- - -

Grub2 on Legacy/MBR and Legacy/GPT systems -

- - - - - -

Don't modify the "Boot Device" unless you really know what you are doing.

- -

- - -

Grub2-efi on UEFI systems -

- - - -

With an UEFI system, the user interface is slightly different as you cannot - choose between with or without graphical menu -

- - - - -

If Mageia is the only system installed on your computer, the installer - created an ESP (EFI System Partition) to receive the bootloader - (Grub2-efi). If there are already UEFI operating systems installed on your - computer (Windows 8 for example), the Mageia installer detects the existing - ESP created by Windows and adds grub2-efi. Although it is possible to have - several ESPs, only one is advised and enough whatever the number of - operating systems you have. -

- - -

Don't modify the "Boot Device" unless you really know what you are doing.

- -

- - -

Using a Mageia bootloader -

- - - -

By default, according to your system, Mageia writes a new:

- - -

Grub2-efi on UEFI systems

-
GRUB2 bootloader either into the MBR (Master Boot Record) of your first hard - drive or in the BIOS boot partition. -
+
GRUB2-efi will be used exclusively as the bootloader for a UEFI system.
-
Grub2-efi bootloader into the ESP
+
By default, a new bootloader (Grub2-efi) will be written into the ESP (EFI + System Partition). +
+ + +
If there are already UEFI-based operating systems installed on your computer + (Windows 8 for example), the Mageia installer will detect the existing ESP + created by Windows and add grub2-efi to it. If no ESP exists, then one will + be created. Although it is possible to have several ESPs, only one is + required, whatever the number of operating systems you have. +

- - -

If you already have other operating systems installed, Mageia attempts to - add them to your new Mageia boot menu. If you don't want this behaviour, - click on Next and then uncheck the box - Probe Foreign OS

- -

Using an existing bootloader +

Bootloader Setup

@@ -187,63 +115,11 @@ -

The exact procedure for adding your Mageia system to an existing bootloader - is beyond the scope of this help, however in most cases it will involve - running the relevant bootloader installation program which should detect and - add it automatically. See the documentation for the operating system in - question. -

- -

- - -

Using chain loading -

- - - -

If you don't want a bootable Mageia, but to chain load it from another OS, - click on Next, then on - Advanced and Check the box Do not touch ESP - or MBR. -

- - - - -

You will get a warning that the bootloader is missing, ignore it by clicking - OK. -

- - - -

- - -

Možnosti -

- - - -

First page +

Glavne možnosti zagonskega nalagalnika

@@ -251,82 +127,121 @@ + +

- -
Delay before booting the default image: This text box - lets you set a delay in seconds before the default operating system is - started up. + +
Bootloader to use
+ + +
This feature is only available to Legacy MBR/BIOS systems. Users of UEFI + systems will not see this option here.
+ +
+ +
Boot device
+ +
Don't change this unless you really know what you are doing
+
- -
Security: This allows you to set a password for the - bootloader. This means other people can not enter single user mode or change - settings at the boot time. + +
Delay before booting the default image
+ + +
This text box lets you set a delay, in seconds, before the default operating + system is started up.
+ +
+
Security
+ + +
This allows you to set a password for the bootloader. This means a username + and password will be required when booting in order to select a booting + entry or change settings. This is optional, and most people are not likely + to have a need for it. The username is root and the + password is the one chosen hereafter. +
+
- -
Password: This text box is where you actually put the - password + +
Password
+ + +
Choose a password for the bootloader (optional)
+ +
+ +
Password (again)
+ + +
Retype the password and DrakX will check that it matches with the one set + above
+ +

+ + +

Advanced

+ + +

+ +
Enable ACPI
+ +
ACPI (Advanced Configuration and Power Interface) is a standard for power + management. It can save energy by stopping unused devices. Deselecting it + could be useful if, for example, your computer does not support ACPI or if + you think the ACPI implementation might cause some problems (for instance + random reboots or system lockups). +
+
- -
Password (again): Retype the password and Drakx will - check that it matches with the one set above. + +
Enable SMP
+ + +
This option enables/disables symmetric multiprocessing for multi-core + processors
+ +
+ +
Enable APIC
+ +
Enabling this gives the operating system access to the Advanced Programmable + Interrupt Controller. APIC devices permit more complex priority models, and + Advanced IRQ (Interrupt Request) management. +
+
- -
Advanced
+ +
Enable Local APIC
- -
-
- - -
  Enable ACPI: ACPI (Advanced Configuration and Power - Interface) is a standard for the power management. It can save energy by - stopping unused devices, this was the method used before APM. Unchecking it - could be useful if, for example, your computer does not support ACPI or if - you think the ACPI implementation might cause some problems (for instance - random reboots or system lockups). -
  - -
- - -
  Enable SMP: This option enables / disables symmetric - multiprocessing for multi core processors. -
  - -
- - -
  Enable APIC: Enabling or disabling this gives the - operating system access to the Advanced Programmable Interrupt - Controller. APIC devices permit more complex priority models, and Advanced - IRQ (Interrupt Request) management. -
  - -
- - -
  Enable Local APIC: Here you can set local APIC, which - manages all external interrupts for a specific processor in an SMP system. -
  - -
-
+
Here you can set Local APIC, which manages all external interrupts for a + specific processor in an SMP system +
+

@@ -334,11 +249,11 @@

Next page +

Bootloader Configuration

@@ -346,52 +261,175 @@ + +

-
Default: Operating system started up by default +
Default
+ + +
The operating system to be started up by default.
+ +
+ +
Append
+ + +
This option lets you pass information to the kernel or tell the kernel to + give you more information as it boots.
-
Append: This option lets you pass the kernel - information or tell the kernel to give you more information as it boots. +
Probe foreign OS
+ + +
If you already have other operating systems installed, Mageia attempts to + add them to your new Mageia boot menu. If you don't want this behaviour, + then untick the Probe Foreign OS option.

+ + +

Advanced

+ + + + +

-
Probe foreign OS: see above Using a Mageia bootloader
+
Video mode
+ + +
This sets the screen size and colour depth to be used by the boot menu. If + you click the down-triangle you will be offered other size and colour depth + options. +
-
Advanced
-
-
- - -
  Video mode: This sets the screen size and colour depth - the boot menu will use. If you click the down triangle you will be offered - other size and colour depth options. -
  - -
- - -
  Do not touch ESP or MBR: see above Using the chain loading
  - -
-
+
Do not touch ESP or MBR
+ + +
Select this option if you don't want a bootable Mageia, but would rather + chain-load it from another OS. You will get a warning that the bootloader is + missing. Click Ok if you are sure you understand the + implications, and wish to proceed. +

+ + + +

+ +

+ + +

Other Options +

+ + + +

Uporaba obstoječega zagonskega nalagalnika +

+ + + +

The exact procedure for adding Mageia to an existing bootloader is beyond + the scope of this documentation. However in most cases it will involve + running the relevant bootloader installation program, which should detect + Mageia and automatically add an entry for it in the bootloader menu. See the + documentation for the relevant operating system. +

+ + +

Installing Without a Bootloader +

+ + + +

While you can opt to install Mageia without a bootloader (see section 2.1 + Advanced), this is not recommended unless you absolutely know what you are + doing, as without some form of bootloader your operating system will be + unable to start. +

+ +

+ + +

Add or Modify a Boot Menu Entry +

+ + + + + +

To do this you need to manually edit /boot/grub2/custom.cfg or use the + software grub-customizer tool instead + (available in the Mageia repositories). +

+ + +

+ + + + + + + + +


	+ + For more information, see: https://wiki.mageia.org/en/Grub2-efi_and_Mageia + +

+ +

diff --git a/sl/setupSCSI.html b/sl/setupSCSI.html index b18d078..bfb2d1a 100644 --- a/sl/setupSCSI.html +++ b/sl/setupSCSI.html @@ -23,33 +23,37 @@

- + + + - + + + + + - -

DrakX usually detects hard disks correctly. With some older SCSI controllers - it may be unable to determine the correct drivers to use and subsequently - fail to recognise the drive. -

If this happens, you will need to manually tell Drakx which SCSI drive(s) - you have. +

DrakX will normally detect hard disks correctly. However, with some older + SCSI controllers it may be unable to determine the correct drivers to use + and subsequently fail to recognise the drive.

DrakX should then be able to configure the drive(s) correctly. +

If your device is not recognised, you will need to manually tell DrakX which + SCSI drive(s) you have. DrakX should then be able to configure the drive(s) + correctly.

diff --git a/sl/software.html b/sl/software.html new file mode 100644 index 0000000..cbc3908 --- /dev/null +++ b/sl/software.html @@ -0,0 +1,427 @@ + + + + + Software + + + + + + +

Software +

+ + + + + + +

Media Selection +

+ + + +

Supplemental Installation Media +

+ + + + + + + + + + + + + + + +

This screen shows you the list of already recognised repositories. You can + add other sources for packages, like an optical-disc or a remote source. + The source selection determines which packages will be available during the + subsequent steps. +

+ + +

Za omrežni vir je potrebno slediti dvema korakoma:

+ + +

+ +
Choosing and activating the network, if not already up.
+ +
+ +
Selecting a mirror or specifying a URL (very first entry). By selecting a + mirror, you have access to the selection of all repositories managed by + Mageia, like the Nonfree, the + Tainted repositories and the + Updates. With the URL, you can designate a specific + repository or your own NFS installation. +
+ +

+ + +

+ + + + + + + + +

+ +

If you are updating a 64-bit installation which may contain some 32-bit + packages, it is advised to use this screen to add an online mirror by + selecting one of the Network protocols here. The 64-bit DVD ISO only + contains 64-bit and noarch packages, it will not be + able to update the 32-bit packages. However, after adding an online mirror, + the installer will find the needed 32-bit packages there. +

+ +

+ + +

Available Media +

+ + + + + + + + + + + + + + + + + +

Here you have the list of available repositories. Not all repositories are + available, according to which media you use for installing. The repositories + selection determines which packages will be available for selection during + the next steps. +

+ + +

+ +
The Core repository cannot be disabled as it contains + the base of the distribution. +
+ +
+ +
The Nonfree repository includes packages that are + free-of-charge, i.e. Mageia may redistribute them, but they contain + closed-source software (hence the name - Nonfree). For example this + repository includes nVidia and AMD graphics card proprietary drivers, + firmware for various WiFi cards, etc. +
+ +
+ +
The Tainted repository includes packages released under + a free license. The main criteria for placing packages in this repository is + that they may infringe patents and copyright laws in some countries, + e.g. multimedia codecs needed to play various audio/video files; packages + needed to play commercial video DVD's, etc. +
+ +

+ +

+ + +

Izbira namizja +

+ + + + + + + + + + + + + + + +

Some choices made here will open other screens with related options.

+ + +

After the selection step(s), you will see a slideshow during the + installation of required packages. The slideshow can be disabled by pressing + the Details button. +

+ + + + +

+ +
Choose whether you prefer to use the KDE Plasma or GNOME desktop + environment. Both come with a full set of useful applications and tools. +
+ +
+ +
Select Custom if you do not wish to use either (or, + actually use both) of these, or if you want to modify the default software + choices for these desktop environments. The LXDE desktop, for instance, is + lighter than the previous two, sporting less eye candy and having fewer + packages installed by default. +
+ +

+ +

+ + +

Izbira skupin paketov +

+ + + + + + + + + +

Packages are arranged into common groups, to make choosing what you need on + your system a lot easier. The groups are fairly self explanatory, however + more information about the content of each is available in tool-tips which + become visible as the mouse is hovered over them. +

+ + +

+ +
Delovna postaja
+ +
+ +
Strežnik
+ +
+ +
Grafično okolje
+ +
+ +
Individual Package Selection: you can use + this option to manually add or remove packages +
+ +

+ + +

See Minimal Install for instructions on how to do a + minimal install (without or with X & IceWM). +

+ +

+ + +

Minimalna namestitev +

+ + + + + + + + + + + + + + + + + + +

Minimal Installation is intended for those with specific uses in mind for + Mageia, such as a server or a specialised workstation. You will probably use + this option combined with the Individual package + selection option to fine-tune your installation. See Choose Packages Tree. +

+ + +

+ +
You can choose a Minimal Installation by de-selecting + everything in the Package Group Selection screen, see + Choose Package Groups. +
+ + +
If desired, you can additionally tick the Individual package + selection option in the same screen. +
+ +
+ +
If you choose this installation method, then the relevant screen (see + screenshot below) will offer you a few useful extras to install, such as + documentation and “X”. +
+ + +
If the With X option is selected, then IceWM (a + lightweight desktop environment) will also be included. +
+ +

+ + +

The basic documentation is provided in the form of “man” and + “info” pages. It contains the man pages from the Linux Documentation + Project and the GNU + coreutils info pages. +

+ + + +

+ + +

Izbira posamičnih paketov +

+ + + + + + + + + + + +

Here you can add or remove any extra packages to customize your + installation. +

+ + +

After having made your choice, you can click on the + floppy icon at the bottom of the page to save your + choice of packages (saving to a USB key works, too). You can then use this + file to install the same packages on another system, by pressing the same + button during install and choosing to load it. +

+ +

+ + diff --git a/sl/soundConfig.html b/sl/soundConfig.html index c674eb0..a16093e 100644 --- a/sl/soundConfig.html +++ b/sl/soundConfig.html @@ -6,7 +6,7 @@ - +