Upravljanje korisnikom i superkorisnikom

Mageia is distributed via ISO images. This page will help you to choose - which image match your needs. + which image best suits your needs.

Media +

Media

Definition +

Definition

Here, a medium (plural: media) is an ISO image file that allows you to - install and/or update Mageia and by extension any physical support the ISO - file is copied to. + install and/or update Mageia and, by extension, any physical medium (DVD, + USB stick, ...) the ISO file is copied to.

- -

You can find them here. +

You can find Mageia ISO's here.

Classical installation media +

Classical installation media

Common features -

- - - -

- -
These ISOs use the traditional installer called drakx.
- -
- -
They are able to make a clean install or an update from previous releases.
- -

- -

- - -

DVD +

Common features

-
Different media for architecture 32 or 64 bits.
+
These ISOs use the Classical installer called DrakX
-
Some tools are available in the Welcome screen: Rescue System, Memory Test, - Hardware Detection Tool. +
They are used for performing clean installs or to upgrade a previously + installed version of Mageia
-
Each DVD contains many available desktop environments and languages.
+
Different media for 32 and 64-bit architectures
-
You'll be given the choice during the installation to add non free software.
- -

- -

- - -

DVD dual arch -

- - - -

- -
Both architectures are present on the same medium, the choice is made - automatically according to the detected CPU. -
- -
- -
Uses Xfce desktop only.
+
Some tools are available in the Installer „Welcome“ screen: + Rescue System, Memory Test, and Hardware + Detection Tool
-
Not all languages are available. (be, bg, ca, de, en, es, fr, it, mk, pl, - pt, ru, sv, uk) TO BE CHECKED! -
+
Each DVD contains many available desktop environments and languages
-
It contains non free software.
+
You'll be given the choice during the installation to add non-free software

@@ -239,201 +223,155 @@

Live media +

Live media

Common features +

Common features

-
Can be used to preview the distribution without installing it on a HDD, and - optionally install Mageia on to your HDD. +
Can be used to preview the Mageia operating system without having to install + it
-
Each ISO contains only one desktop environment (KDE or GNOME).
+
The Live media also includes an Installer.
-
Different media for 32 or 64 bit architectures.
+
Each ISO contains only one desktop environment (Plasma, GNOME or Xfce)
-
Live ISOs can only be used to create clean - installations, they cannot be used to upgrade from previous - releases.
+
Different media for 32 and 64-bit architectures
-
They contain non free software.
+
They contain non-free software

- -

Live CD KDE +

Live DVD Plasma

-
KDE desktop environment only.
+
Plasma desktop environment only
-
English language only.
+
All available languages are present
-
32 bit only.
+
64-bit architecture only

- -

Live CD GNOME -

- - - -

- -
GNOME desktop environment only.
- -
- -
English language only.
- -
- -
32 bit only.
- -

- -

- - -

Live DVD KDE +

Live DVD GNOME

-
KDE desktop environment only.
+
GNOME desktop environment only
-
All languages are present.
+
All available languages are present
-
Different media for 32 or 64 bit architectures.
+
64-bit architecture only

- -

Live DVD GNOME +

Live DVD Xfce

-
GNOME desktop environment only.
+
Xfce desktop environment only
-
All languages are present.
+
All available languages are present
-
Different media for 32 or 64 bit architectures.
+
32 or 64-bit architectures

@@ -442,86 +380,63 @@

- -

Boot-only CD media +

Net install media

Common features +

Common features

-
Each one is a small image that contains no more than that which is needed to - start the drakx installer and find drakx-installer-stage2 and other packages - that are needed to continue and complete the install. These packages may be - on the PC hard disk, on a local drive, on a local network or on the - Internet. -
+
Different media for 32 and 64-bit architectures
-
These media are very light (less than 100 MB) and are convenient when - bandwidth is too low to download a full DVD, a PC without a DVD drive or a - PC that can't boot from a USB stick. -
- -
- -
Different media for 32 or 64 bit architectures.
- -
- -
English language only.
+
First steps are English language only

- -

boot.iso +

netinstall.iso

-
Contains only free software, for those people who refuse to use non-free - software. +
Contains only free software, for those who prefer to not use non-free + software

- -

boot-nonfree.iso +

netinstall-nonfree.iso

-
Contains non-free software (mostly drivers, codecs...) for people who need - it. -
+
Contains non-free software (mostly drivers, codecs...) for those who need it

@@ -560,118 +471,127 @@

Downloading and Checking Media +

Downloading and Checking Media

Downloading +

Downloading

Once you have chosen your ISO file, you can download it using either http or - BitTorrent. In both cases, a window gives you some information, such as the - mirror in use and the possibility to change if the bandwidth is to low. If - http is chosen, you may also see something like + BitTorrent. In both cases, you are provided with some information, such as + the mirror in use and an option to switch to an alternative if the bandwidth + is too low.

- +

If http is chosen you will also see some information regarding checksums.

md5sum and sha1sum are tools to check the ISO integrity. Use only one of - them. Keep one of them for further - usage. Then this window appears: +

md5sum, sha1sum and + sha512sum (the most secure) are tools to check the ISO + integrity. Copy one of the checksums (string of alphanumeric characters) for + use in the next section.

- -

Check the radio button Save File.

In the meantime, a window to download the actual ISO will open:

+ + +

Click on Save File, then click OK. +

- -

Checking the downloaded media integrity +

Checking the integrity of the downloaded media

- -

Both checksums are hexadecimal numbers calculated by an algorithm from the - file to be downloaded. When you ask these algorithms to recalculate this - number from your downloaded file, either you have the same number and your - downloaded file is correct, or the number is different and you have a - failure. A failure infers that you should retry the download. +

The checksums referred to earlier, are digital fingerprints generated by an + algorithm from the file to be downloaded. You may compare the checksum of + your downloaded ISO against that of the original source ISO. If the + checksums do not match, it means that the actual data on the ISO's do not + match, and if that is the case, then you should retry the download or + attempt a repair using BitTorrent.

- -

Open a console, no need to be root, and:

- - -

- To use md5sum, type: [sam@localhost]$ md5sum - path/to/the/image/file.iso. +

To generate the checksum for your downloaded ISO, open a console, (no need + to be root), and:

- -

- To use sha1sum, type: [sam@localhost]$ sha1sum - path/to/the/image/file.iso. -

- +

+ +
To use the md5sum, type: md5sum + path/to/the/image/file.iso
+ +
+ +
To use the sha1sum, type: sha1sum + path/to/the/image/file.iso
+ +
+ +
To use the sha512sum, type: sha512sum + path/to/the/image/file.iso
+ +

and compare the obtained number on your computer (you may have to wait for a - while) with the number given by Mageia. Example: -

- +

Example:

then compare the result (you may have to wait for a while) with the ISO + checksum provided by Mageia. +

Burn or dump the ISO +

Burn or dump the ISO

- -

The checked ISO can now be burned to a CD or DVD or dumped to a USB - stick. These operations are not a simple copy and aim to make a boot-able - medium. +

The verified ISO can now be burned to a CD/DVD or „dumped“ to a + USB stick. This is not a standard copy operation, as a bootable medium will + actually be created.

@@ -683,33 +603,29 @@

- -

Use whatever burner you wish but ensure the burning device is set correctly - to burn an image, burn data or files is not - correct. There is more information in the Mageia - wiki. +

Whichever software you use, ensure that the option to burn an + image is used. Burn data or + files is NOT correct. See the the Mageia + wiki for more information.

Dump the ISO to a USB stick +

Dump the ISO to a USB stick

- -

All Mageia ISOs are hybrids, which means you can 'dump' them to a USB stick - and then use it to boot and install the system. +

All Mageia ISOs are hybrids, which means you can dump them to a USB stick + and then use that to boot and install the system.

@@ -720,76 +636,97 @@

"dumping" an image onto a flash device destroys any previous file-system on - the device; any other data will be lost and the partition capacity will be - reduced to the image size. +

Dumping an image onto a flash device destroys any previous file-system on + the device and all existing data will be lost.

- -

To recover the original capacity, you must redo partitioning and re-format - the USB stick. -

- +

+ + + + + + + + +

+ +

Also, the only partition on the flash device will then just be the Mageia + ISO partition. +

+ +

So, if an ISO of about 4GB is written to an 8GB USB stick, the stick will + then only show up as 4GB. This is because the remaining 4GB is no longer + formatted - hence not currently available for use. To recover the original + capacity, you must reformat and repartition the USB stick. +

+ +

Using a graphical tool within Mageia +

Using a graphical tool within Mageia

You can use a graphical tool like IsoDumper

Using a graphical tool within Windows +

Using a graphical tool within Windows

You could try:

- -

- Rufus using the - "ISO image" option; -

- - -

- Win32 - Disk Imager

+ +
Rufus using the + "ISO image" option +
+ +
+ +
Win32 Disk + Imager
+ +

- -

Using Command line within a GNU/Linux system +

Using the Command line within a GNU/Linux system

@@ -800,18 +737,14 @@

It is potentially *dangerous* to do this by hand. You risk to overwrite a - disc partition if you get the device-ID wrong. +

It is potentially *dangerous* to do this by hand. You risk overwriting + potentially valuable existing data if you specify the wrong target device.

- - -

You can also use the dd tool in a console:

-
Become root with the command su - (don't forget the - final '-' ) +
Become a root (Administrator) user with the command + su - (don't forget the - )
-
-
Plug your USB stick (do not mount it, this also means do not open any - application or file manager that could access or read it) +
Plug in your USB stick - but do not mount it (this also means do not open + any application or file manager that could access or read it)
-
Enter the command fdisk -l
- +
Enter the command fdisk -l
- + +
-
Alternatively, you can get the device name with the command - dmesg: at end, you see the device name starting with - sd, and sdd in this case: +
Find the device name for your USB stick (by its size), for example + /dev/sdb in the screenshot above, is an 8GB USB stick. +
+ +
Alternatively, you can find the device name with the command + dmesg. Towards the end of the following example, you can + see the device name starting with sd, and in this case, + sdd is the actual device. You can also see that its + size is 2GB:
-
```
[72594.604531] usb 1-1: new high-speed USB device number 27 using xhci_hcd
 [72594.770528] usb 1-1: New USB device found, idVendor=8564, idProduct=1000
 [72594.770533] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
@@ -869,32 +807,43 @@
                                      
```
-
Find the device name for your USB stick (by its size), for example - /dev/sdb in the screenshot above, it is a 8GB USB stick. -
- -

Enter the command: dd if=path/to/the/ISO/file + of=/dev/sdX bs=1M

Enter the command: # dd if=path/to/the/ISO/file of=/dev/sdX - bs=1M

- +

Where X=your device name eg: + /dev/sdd

Where X=your device name eg: /dev/sdc

- +

Example:dd if=/home/user/Downloads/Mageia-6-x86_64-DVD.iso + of=/dev/sdd bs=1M

Example: # dd if=/home/user/Downloads/Mageia-4-x86_64-DVD.iso - of=/dev/sdb bs=1M

+ + + + + + + + +


	+ + It might be helpful to know that if stands + for input file and of stands + for output file + + +

-
Enter the command: # sync
+
Enter the command: sync
-
Unplug your USB stick, it is done
+
This is the end of the process, and you may now unplug your USB stick.

diff --git a/hr/acceptLicense.html b/hr/acceptLicense.html index 35e8085..be6b091 100644 --- a/hr/acceptLicense.html +++ b/hr/acceptLicense.html @@ -22,6 +22,12 @@

+ + + + + + @@ -57,24 +63,35 @@ -

Prijew instalacije Mageie, molim pročitajte - pažljivo uvjete licence. -

- - -

Ovi se uvjeti primjenjuju na cijelu Mageia - distribuciju i moraju biti prihvaćeni prije nego što nastavite. -

- - -

Za prihvaćanje jednostavno odaberite Prihvaćam i zatim - kliknite na Slijedeće. -

+ +
Before installing Mageia, please read the license terms and conditions + carefully. +
+ +
+ +
These terms and conditions apply to the entire Mageia distribution and must + be accepted before you can continue. +
+ +
+ +
To proceed, simply select Accept and then click on + Next
+ +

Ako odlučite ne prihvatiti ove uvjete, zahvaljujemo vam pto ste - pogledali. Klikom na Isključi ponovno ćete pokrenuti - vaše računalo. +

If you decide not to accept these conditions, then we thank you for your + interest in Mageia. Clicking Quit will reboot your + computer.

@@ -98,8 +115,8 @@ -

Da biste vidjeli što je novo u Mageii, kliknite - na Bilješka o izdanju dugme. +

Important information about this particular Mageia release can be viewed by + clicking on the Release Notes button.

diff --git a/hr/addUser.html b/hr/addUser.html index 74e20f3..8a1ba66 100644 --- a/hr/addUser.html +++ b/hr/addUser.html @@ -2,22 +2,22 @@ - Upravljanje korisnikom i superkorisnikom + User Management - - -

Upravljanje korisnikom i superkorisnikom +

User Management

@@ -36,12 +36,6 @@ - - - - - -

@@ -55,13 +49,13 @@ -

Preporučljivo je za sve Mageia instalacije - postavit isuperkorisničku ili administrativnu lozinku, koju obično nazivamo - root lozinka u linuxu. dok upisujete lozinku u gornje - polje boja štita će se mijenjati od crvene preko žute do zelene ovisno o - jačini lozinke. Zeleni štit pokazuje da koristite jaku lozinku. Morate - ponoviti lozinku u donjem polju, što provjerava da niste krivo napisali prvu - lozinku uspoređujući ih. +

It is advisable for all Mageia installations to set a + superuser (Administrator) password, usually called the + root password in Linux. As you type a password into the + top box a shield will change from red-to-yellow-to-green depending on the + strength of the password. A green shield shows you are using a strong + password. You need to repeat the same password in the box underneath, to + check that the first entry was not mistyped.

@@ -74,8 +68,8 @@ -

Sve su lozinke osjetljive n avelika i mala slova, pa je najbolje koristiti - mješavinu slova (velikih i malih), brojeva i ostalih znakova u lozinki. +

All passwords are case-sensitive. It is best to use a mixture of letters + (upper and lower case), numbers and other characters in a password.

@@ -98,9 +92,10 @@ -

Dodajte korisnika ovdje. korisnik ima manje ovlasti od superkorisnika - (root), ali dovoljno da koristi internet,uredske programe ili igra igre i - sve ostalo što prosječan korisnik radi sa svojim računalom. +

Add a User here. A regular user has fewer privileges than the + superuser (root), but enough to use the Internet, office + applications or play games and anything else the average user might use a + computer for.

@@ -108,38 +103,41 @@

-
Ikona: ako kliknete na ovo dugme promjeniti će ikonu - korisnika. -
+
Icon
+ + +
Click on this button if you want to change the user's icon
-
Pravo ime: Umetni korisničko pravo ime u ovo tekstualno - polje. -
+
Real Name
+ + +
Insert the user's real name into this text box
-
Ime prijave: Ovdje unesite korisnikovo ie prijave ili - dopustite da drakx koristi verziju korisničkih pravih imena. Ime - prijave je osjetljivo na mala i velika slova.
+
Login Name
+ + +
Enter the user login name or let DrakX use a version of the user's real + name. The login name is case-sensitive.
-
Lozinka: U tekstualno polje trebate uppisati korisničku - lozinku. Na kraju tekstualnog polja nalazi se štit koji pokazuje snagu - lozinke.(Također vidi Bilješka) +
Password
+ + +
Type in the user password. There is a shield at the end of the text box that + indicates the strength of the password. (See also Bilješka)
- -
+ -
Lozinka (ponovno): Ponovno upišite korisničku lozinku u - ovo tekstualno polje i drakx će provjeriti imate li istu lozinku u svakom - tekstualnom polju. +
Password (again): Retype the user + password. DrakX will check that you have not mistyped the password.

Svaki korisnik kojeg dodate tijekom instalacije Mageie, će imati čitljiv ( - ali zaštićen za pisanje) osobni direktorij. +

Any users added while installing Mageia, will have a home directory that is + both read and write protected (umask=0027)

However, while using your new install, any user you add in MCC - - System - Manage users on system will have a home directory that - is both read and write protected. -

If you don't want a world readable home directory for anyone, it is advised - to only add a temporary user now and to add the real one(s) after reboot. -

If you prefer world readable home directories, you might want to add all - extra needed users in the Configuration - Summary step - during the install. Choose User management. +

You can add any extra needed users in the Configuration - + Summary step during the install. Choose User + management.

Napredno korisničko upravljanje +

User Management (advanced)

@@ -200,65 +187,32 @@ -

Ako je kliknuto na napredno dugme nudi vam se zaslon - gdje možete urediti postavke korisnika kojega dodajete. +

The Advanced option allows you to edit further settings + for the user you are adding.

Dodatno, možete onemogućiti ili omogućiti račun gosta.

- - -

- - - - - - - - -


	- - Anything a guest with a default rbash guest account - saves to his /home directory will be erased when he logs out. The guest - should save his important files to a USB key. - - -

- -

-
Omogući račun gosta: Ovdje možete omogućiti ili - onemogućiti račun gosta. Račun gosta dopušta gostu prijavu i korištenje - PC-ja, ali ima ograničeniji pristup od normalnih korisnika. -
- -
- -
Shell: This drop down list allows you to change the - shell used by the user you are adding in the previous screen, options are - Bash, Dash and Sh -
+
Shell: This drop-down list allows you to change the + shell available to any user you added in the previous screen. Options are + Bash, Dash and Sh
-
User ID: Here you can set the user ID for the user you - are adding in the previous screen. This is a number. Leave it blank unless - you know what you are doing. +
User ID: Here you can set the user ID for any user you + added in the previous screen. If you are unsure what the purpose of this is, + then leave it blank.
-
Group ID: This lets you set the group ID. Also a - number, usually the same one as for the user. Leave it blank unless you know - what you are doing. +
Group ID: This lets you set the group ID. Again, if + unsure, leave it blank.

Partitioning +

+ + + + + + +

Suggested Partitioning +

+ + + + + + + + + + + + + + + + + +

In this screen you can see the content of your hard drive(s) along with the + DrakX partitioning proposals for where to install Mageia. +

+ + +

The actual options available from those shown below will vary according to + the layout and content of your particular hard drive(s). +

+ + + + +

Main Options

+ +
Use Existing Partitions
+ + +
If this option is available, then existing Linux compatible partitions have + been found and may be used for the installation. +
+ +
+ +
Use Free Space
+ + +
If you have unused space on your hard drive then this option will use it for + your new Mageia installation. +
+ +
+ +
Use Free Space on a Windows Partition
+ + +
If you have unused space on an existing Windows partition, the installer may + offer to use it. This can be a useful way of making room for your new Mageia + installation, but is a risky operation so you should make sure you have + backed up all important files! +
+ + +
With this option, the installer displays the remaining Windows partition in + light blue and the proposed Mageia partition in dark blue with their + intended sizes just underneath. You have the option to modify these sizes by + clicking and dragging the gap between both partitions. See the following + screenshot: +
+ +

+ +

Erase and use Entire Disk

+ + +

This option will allocate the entire drive for Mageia +

+ + +

+ + + + + + + + +


	+ + This will erase ALL data on the selected hard drive. Take care! If you + intend to use part of the disk for something else, or you already have data + on the drive that you are not prepared to lose, then do not use this option. + + +

+ + +

+ + + + + + + + +

+ +

Note that this involves shrinking the size of the Windows partition. The + partition must be "clean", meaning that Windows must have closed down + correctly the last time it was used. It must also have been defragmented, + although this is not a guarantee that all files in the partition have been + moved out of the area that is about to be used. It is highly recommended to + back up your personal files. +

+ +

+ +
Custom Disk Partitioning
+ + +
This gives you complete control over the placing of the installation on your + hard drive(s). +
+ +

+ + + + +

If you are not using the Custom disk partitioning + option, then the installer will allocate the available space according to + the following rules: +

+ + +

+ +
If the total available space is less than 50 GB, then only one partition is + created. This will be the / (root) partition. +
+ +
+ +
If the total available space is greater than 50 GB, then three partitions + are created +
+ + +
+
- + +
  6/19 of the total available place is allocated to / + with a maximum of 50 GB +
  + +
- + +
  1/19 is allocated to swap with a maximum of 4 GB +
  + +
- + +
  the rest (at least 12/19) is allocated to /home
  + +
+
+ +

+ + +

This means that from 160 GB or greater available space, the installer will + create three partitions: +

+ + +

+ +
50 GB for /
+ +
+ +
4 GB for swap
+ +
+ +
and the remainder for /home
+ +

+ + +

+ + + + + + + + +

+ +

If you are using a UEFI system, the ESP (EFI System Partition) will be + automatically detected - or created if it does not exist yet - and mounted + on /boot/EFI. The Custom disk + partitioning option is the only one that allows to check it has + been correctly done. +

+ + +

If you are using a Legacy (also known as BIOS) system with a GPT partitioned + disk, you need to create a BIOS boot partition if it doesn't already + exist. It should be about 1 MiB with no mount point. It can be created with + the Installer, under Custom disk partitioning, like any + other partition. Be sure to select „BIOS boot partition“ for + filesystem type. +

+ + +

See DiskDrake for information on how to proceed. +

+ +

+ + + + + + +

+ + + + + + + + +

+ +

Some newer drives are now using 4096 byte logical sectors, instead of the + previous standard of 512. Due to lack of available hardware, the + partitioning tool used in the installer has not been tested with such a + drive. +

+ + +

Some SSD devices now use an erase block size over 1 MB. If you have such a + device we suggest that you partition the drive in advance, using an + alternative partitioning tool like gparted, and to use the following + settings: +

+ + +

+ +
Align to = MiB +
+ +
+ +
Free space preceding (MiB) = 2 +
+ +

+ + +

Also make sure all partitions are created using an even number of megabytes.

+ +

+ + +

Odaberite mjesta montiranja +

+ + + + + + + + + + + + + + + + + + + + + + + + + + + +

Here you see the Linux partitions that have been found on your computer. If + you don't agree with the DrakX suggestions, you can change the mount points + yourself. +

+ + +

+ +
To the left of the drop-down menus is a list of available partitions. For + example: sda is a hard drive - and + 5 is a partition number, followed + by the (capacity, mount point, filesystem type) of the + partition. +
+ +
+ +
If you have several partitions, you can choose various different + mount points from the drop down menu, such as + /, /home and + /var. You can even make your own mount points, for + instance /video for a partition where you want to store + your films, or perhaps /Data for all your data files. +
+ +
+ +
For any partitions that you don't need to make use of, you can leave the + mount point field blank. +
+ +

+ + +

+ + + + + + + + +


	+ + If you make any changes here, ensure you still have a `/` + (root) partition. + + +

+ + +

+ + + + + + + + +


	+ + If you are not sure what to choose, click Previous to + go back and then tick Custom disk partitioning, where + you can click on a partition to see its type and size. + + +

+ + +

If you are sure the mount points are correct, click on + Next, and choose whether you only want to format the + partition suggested by DrakX, or more. +

+ +

+ + +

Confirm hard disk to be formatted +

+ + + + + + + + + + + + + + + + + +

+ +
Click on Previous if you are at all unsure about your + choice. +
+ +
+ +
Click on Next to proceed if you are sure that it is OK + to erase every partition, every operating system and all + data that might be on that hard disk. +
+ +

+ +

+ + +

Custom Disk Partitioning with DiskDrake +

+ + + + + + + + + + + + + + + +

+ +
Modify the layout of your disk(s) here. You can remove or create partitions, + change the filesystem or size of a partition and even view their details + before you start. +
+ +
+ +
There is a tab at the top for every detected hard disk (or other storage + device, like a USB key). In the screenshot above there are two available + devices: sda and sdb. +
+ +
+ +
For all other actions: click on the desired partition first. Then view it, + or choose a filesystem and a mount point, resize it or wipe + it. Expert mode provides more options such as to label + (name) a partition, or to choose a partition type. +
+ +
+ +
Continue until you have adjusted everything to your satisfaction, then click + Done when you're ready. +
+ +

+ + +

+ + + + + + + + +


	+ + + + + + Take care with the Clear all option, use it only if you + are sure you want to wipe all partitions on the selected storage device. + + + + + + If you wish to use encryption on your `/` partition you + must ensure that you have a separate `/boot` + partition. The encryption option for the `/boot` + partition must NOT be set, otherwise your system will be unbootable. + + + + + + +

+ + +

+ + + + + + + + +


	+ + + + + + If you are installing Mageia on a UEFI system, check that an ESP (EFI System + Partition) is present and correctly mounted on + `/boot/EFI`. See Figure 1 below. + + + + + + If you are installing Mageia on a Legacy/GPT system, check that a BIOS boot + partition is present and of the correct type. See Figure 2 below. + + + + + + +

+ + + + + +

+ + +

Formatiram +

+ + + + + + + + + + + + + + + +

Here you can choose which partition(s) you wish to format. Any data on + partitions not marked for formatting will be preserved. +

+ + +

Usually, at least the partitions that DrakX selected need to be formatted. +

+ + +

Click on Advanced to choose the partitions you want to + check for so-called bad blocks

+ + +

+ + + + + + + + +


	+ + If you're not sure you have made the right choice, you can click on + Previous, again on Previous and + then on Custom to get back to the main screen, where + you can choose to view details of your partitions. + + +

+ + +

When you are confident about the selections, click on + Next to continue. +

+ +

+ - - - + + - -

Završili ste instaliranje i konfiguriranje Mageie - i sada je sigurno ukloniti instalcijski medij i napraviti reboot računala. +

You have finished installing and configuring Mageia and it is now safe to + remove the installation medium and reboot your computer.

After reboot, in the bootloader screen, you can choose between the operating - systems on your computer (if you have more than one). +

After rebooting, you can use the bootloader screen to choose which operating + system to start (if there are more than one on your computer).

If you didn't adjust the settings for the bootloader, your Mageia install - will be automatically selected and started. + will be automatically selected and started.

- +

Uživajte!

+ - -

Visit www.mageia.org if you have any questions or want to contribute to - Mageia +

Visit www.mageia.org/en/ + if you have any questions or want to contribute to Mageia

- -

diff --git a/hr/firewall.html b/hr/firewall.html new file mode 100644 index 0000000..9893549 --- /dev/null +++ b/hr/firewall.html @@ -0,0 +1,95 @@ + + + + + Vatrozid + + + + + + +

Vatrozid +

+ + + + + + + +

This section allows you to configure some simple firewall rules: they + determine which type of message from the Internet will be accepted by the + target system. This, in turn, allows the corresponding services on the + system to be accessible from the Internet. +

+ + +

In the default setting (no button is checked), no service of the system is + accessible from the network. The Everything (no + firewall) option enables access to all services of the machine - + an option that does not make much sense in the context of the installer + since it would create a totally unprotected system. Its veritable use is in + the context of the Mageia Control Center (which uses the same GUI layout) + for temporarily disabling the entire set of firewall rules for testing and + debugging purposes. +

+ + +

All other options are more or less self-explanatory. As an example, you will + enable the CUPS server if you want printers on your machine to be accessible + from the network. +

+ + +

Advanced

+ + +

The Advanced option opens a window where you can enable + a series of services by typing a list of „couples“ (blank + separated) +

+ + +

<port-number>/<protocol>

+ + + + + + + + + +

- <port-number> is the value of the port assigned to + the service you want to enable (e.g. 873 for the RSYNC service) as defined + in RFC-433; +

- <protocol> is one of TCP or + UDP - the internet protocol that is used by the + service. +

+ + +

For instance, the entry for enabling access to the RSYNC service therefore + is 873/tcp. +

+ + +

In case a service is implemented to use both protocols, you specify 2 + couples for the same port. +

+ +

+ + diff --git a/hr/graphicalConfiguration.html b/hr/graphicalConfiguration.html new file mode 100644 index 0000000..6ddbff6 --- /dev/null +++ b/hr/graphicalConfiguration.html @@ -0,0 +1,372 @@ + + + + + Graphical Configuration + + + + + + +

Graphical Configuration +

+ + + + + +

Konfiguracija grafičke kartice i monitora +

+ + + + + + + + + + + + + + + +

No matter which graphical environment (also known as desktop environment) + you chose for this install of Mageia, they are all based on a graphical user + interface system called X Window System, or simply + „X“. So in order for KDE Plasma, GNOME, LXDE or any other + graphical environment to work well, the following „X“ settings + need to be correct. +

+ + +

Choose the appropriate settings manually if you think the details are + incorrect, or if none are shown. +

+ + +

+ +
Graphic Card
+ + +
If you need to, you can select a specific card from this expandable + list. See the section called „Choose an X Server (Configure your Graphic Card)“. +
+ +
+ +
Monitor
+ + +
You can choose Plug 'n Play, if applicable, or choose your monitor from the + Vendor or Generic lists. Choose + Custom if you prefer to manually set the horizontal and + vertical refresh rates of your monitor. See the section called „Izaberite vaš monitor“. +
+ +
+ +
Resolution
+ + +
The resolution and color depth of your monitor can be set here.
+ +
+ +
Test
+ + +
The test button does not always appear during install. If the option is + there, and you test your settings, you should be asked to confirm that your + settings are correct. If you answer Yes, the settings + will be kept. If you don't see anything, you'll return to the configuration + screen and be able to reconfigure everything until the test result is + satisfactory. If the test option is not available, then make sure your + settings are on the safe side. +
+ +
+ +
Options
+ + +
Here you can choose to enable or disable various options.
+ +

+ + +

+ + + + + + + + +


	+ + There is a risk of damaging a monitor if you choose refresh rates that are + outside the frequency range of that monitor. This applies to older CRT + displays: modern monitors will reject an unsupported frequency and normally + enter standby mode. + + +

+ +

+ + +

Choose an X Server (Configure your Graphic Card) +

+ + + + + + + + + + + + + + + + + + + +

DrakX has a very comprehensive database of video cards and will usually + correctly identify your video device. +

+ + +

If the installer has not correctly detected your graphic card and you know + which one you have, you can select it from the tree by: +

+ +
Vendor
+ +
+ +
then the make of your card
+ +
+ +
and the model of card
+ +

+ + +

If you cannot find your card in the vendor lists (because it's not yet in + the database or it's an older card) you may find a suitable driver in the + Xorg category, which provides more than 40 generic and + open source video card drivers. If you still can't find a specific driver + for your card there is the option of using the VESA driver which provides + basic capabilities. +

+ + +

+ + + + + + + + +


	+ + Be aware that if you select an incompatible driver you may only have access + to the Command Line Interface + +

+ + +

Some video card manufacturers provide proprietary drivers for Linux which + may only be available in the Nonfree repository and in + some cases only from the card manufacturers' websites. The + Nonfree repository needs to be explicitly enabled to + access them. If you didn't enable it previously, you should do this after + your first reboot. +

+ +

+ + +

Izaberite vaš monitor +

+ + + + + + + + + + + + + + + +

DrakX ima vrlo opsežnu bazu podataka monitora i obično će točno + identificirati vaš. +

+ + +

+ + + + + + + + +


	+ + Selecting a monitor with different characteristics + could damage your monitor or video hardware. Please don't try something + without knowing what you are doing. If in doubt you should + consult your monitor documentation. + + +

+ + + + +

Custom

+ +

This option allows you to set two critical parameters: the vertical refresh + rate and the horizontal sync rate. Vertical refresh determines how often the + screen is refreshed and horizontal sync is the rate at which scan lines are + displayed. +

+ + +

It is VERY IMPORTANT that you do not specify a monitor + type with a sync range that is beyond the capabilities of your monitor: you + may damage your monitor. If in doubt, choose a conservative setting and + consult your monitor documentation. +

+ +

Plug'n Play

+ +

This is the default option and automatically tries to determine the monitor + type from the monitor database. +

+ +

Vendor

+ +

If the installer has not correctly detected your monitor and you know which + one you have, you can select it from the tree by selecting: +

+ +

+ + +

+ +
Manufacturer
+ +
+ +
Monitor model
+ +

+ + +

Generic: + +
Selecting this group will list nearly 30 display configurations such as + 1024x768 @ 60Hz and includes flat-panel displays as used in laptops. This is + often a good monitor selection group if you need to use the VESA card driver + when your video hardware cannot be determined automatically. Once again it + may be wise to be conservative in your selections. +
+ +

+ +

+ + diff --git a/hr/index.html b/hr/index.html index 4039181..94d5f35 100644 --- a/hr/index.html +++ b/hr/index.html @@ -27,16 +27,17 @@

Uvod
Media
Downloading and Checking Media
Burn or dump the ISO
Media
Downloading and Checking Media
Burn or dump the ISO

DrakX, Mageia instalacijski program

The installation steps
Installation Problems and Possible Solutions
The installation steps
Instalacijski zaslon dobrodošlice
Installation Problems and Possible Solutions

Molim izaberite jezik koji želite koristiti

@@ -50,43 +51,51 @@

Odaberite mjesta montiranja

Confirm hard disk to be formatted

Custom disk partitioning with DiskDrake

Formatiram

Odabir Medija (Konfiguracija dopunskog instalacijskog medija)

Media Selection (Nonfree)

Odabir radnog okruženja

Odabir grupe paketa

Minimal Install

Izaberi pojedinačne pakete

Upravljanje korisnikom i superkorisnikom

Partitioning

Suggested Partitioning
Odaberite mjesta montiranja
Confirm hard disk to be formatted
Custom Disk Partitioning with DiskDrake
Formatiram

Software

Media Selection
Odabir radnog okruženja
Odabir grupe paketa
Minimal Install
Izaberi pojedinačne pakete

User Management

Poostavi administratorsku (root) lozinku:
Unesite korisnika
Napredno korisničko upravljanje
User Management (advanced)

Konfiguracija grafičke kartice i monitora

Choose an X Server (Configure your Graphic Card)

Izaberite vaš monitor

Glavne postavke bootloadera

Graphical Configuration

With a Bios system
With an UEFI system
Konfiguracija grafičke kartice i monitora
Choose an X Server (Configure your Graphic Card)
Izaberite vaš monitor

Add or Modify a Boot Menu Entry

Bootloader

With a Bios system
With an UEFI system
Grub2
Bootloader Setup
Other Options

Summary of miscellaneous parameters

Configuration Summary

System parameters
Sigurnost

Konfigurirajte vremensku zonu

Select your Country / Region

Locale

Input method
Konfigurirajte vremensku zonu
Select your Country / Region

Konfigurirajte vaše servise

@@ -111,33 +120,16 @@

Howto

- - - - - - - - - - - - - @@ -155,29 +147,37 @@ - - - + + + + + + + + + + + @@ -190,7 +190,6 @@ - @@ -200,17 +199,20 @@ - - - + + + + + + diff --git a/hr/installUpdates.html b/hr/installUpdates.html index 22456d3..b7f76e4 100644 --- a/hr/installUpdates.html +++ b/hr/installUpdates.html @@ -6,7 +6,7 @@ - + + +

Locale +

+ + + +

Konfigurirajte vremensku zonu +

+ + + + + + + + + + + + + +

+ +
Choose your timezone by choosing your country, or a city close to you in the + same timezone. +
+ +

+ + +

In the next screen you can choose to set your hardware clock to local time + or to GMT, also known as UTC. +

+ + +

+ + + + + + + + +


	+ + Ako imate više operativinih sustava na vašem računalu, budite sigurni da su + svi postavljeni na lokalno vrijeme ili na + + +

+ +

+ + +

Select your Country / Region +

+ + + + + + + + + + + +

+ +
Select your country or region. This is important for all kinds of settings, + like the currency and wireless regulatory domain. Setting the wrong country + can lead to being unable to use a Wireless network. +
+ +
+ +
If your country isn't in the list, click the Other + Countries option and choose your country / region there. +
+ +

+ + +

+ + + + + + + + +


	+ + If your country is only in the Other Countries list, + after clicking OK it may seem that a country from the + main list was chosen. Despite this, DrakX will actually apply your choice. + + +

+ + +

Input method +

+ + + +

In the Other Countries screen you can also select an + input method (at the bottom of the list). Input methods allow users to input + multilingual characters (Chinese, Japanese, Korean, etc). IBus is the + default input method, so users should not need to configure it + manually. Other input methods (SCIM, GCIN, HIME, etc) also provide similar + functions and can be installed if you added HTTP/FTP media before package + selection. +

+ + +

+ + + + + + + + +


	+ + If you missed the input method setup during installation, you can access it + post-install via Configure your Computer → System, or by running + localedrake as root. + + +

+ +

+ + diff --git a/hr/misc-params.html b/hr/misc-params.html index ade0227..ecc3644 100644 --- a/hr/misc-params.html +++ b/hr/misc-params.html @@ -2,22 +2,22 @@ - Summary of miscellaneous parameters + Configuration Summary - - -

Summary of miscellaneous parameters +

Configuration Summary

@@ -39,23 +39,49 @@ +

DrakX presents a proposal for the configuration of your system depending on + the choices you made and on the hardware detected. You can check the + settings here and change them if you want by pressing + Configure. +

- - - - - - - - - - -

DrakX made smart choices for the configuration of your system depending on - the choices you made and on the hardware DrakX detected. You can check the - settings here and change them if you want after pressing - Configure. -

+ + + + + + + + +


	+ + As a general rule, it is recommended that you accept the default settings + unless: + + + + + + there are known issues with a default setting + + + + + the default setting has already been tried and it fails + + + + + some other factor mentioned in the detailed sections below is an issue + + + + + +

@@ -74,65 +100,61 @@

-
Timezone
+
Timezone
-
DrakX selected a time zone for you, depending on your preferred - language. You can change it if needed. See also the section called „Konfigurirajte vremensku zonu“
+
DrakX selects a timezone for you, depending on your preferred language. You + can change it if needed. See also Configure Timezone
-
Country / Region
+
Country / Region
-
If you are not in the selected country, it is very important that you - correct the setting. See the section called „Select your Country / Region“
+
If the selected country is wrong, it is very important that you correct the + setting. See Select Country
-
Bootloader
+
Bootloader
-
DrakX has made good choices for the bootloader setting. +
DrakX proposal for the bootloader setting
-
Do not change anything, unless you know how to configure Grub and/or Lilo -
+
Do not change anything, unless you know how to configure GRUB2. For more + information, see Bootloader
-
For more information, see the section called „Glavne postavke bootloadera“
+
-
User management
+
User management
-
You can add extra users here. They will each get their own - /home directories. +
You can add extra users here. They will each be allocated their own + /home directories.
-
Services: -
+
Services
-
System services refer to those small programs which run the background - (daemons). This tool allows you to enable or disable certain tasks. +
System services refer to those small programs which run in the background + (daemons). This tool allows you to enable or disable certain processes.

You should check carefully before changing anything here - a mistake may - prevent your computer from operating correctly. -
- - -
For more information, see the section called „Konfigurirajte vaše servise“
+ prevent your computer from operating correctly. For more information, see + Configure Services

@@ -157,19 +179,36 @@

Keyboard: -

Keyboard

This is where you setup or change your keyboard layout which will depend on - your location, language or type of keyboard. +

Configure your keyboard layout according to your location, language and type + of keyboard.

+ + +

+ + + + + + + + +


	+ + If you notice a wrong keyboard layout and want to change it, keep in mind + that your passwords are going to change too. + + +

-
Mouse: -
+
Mouse

Here you can add or configure other pointing devices, tablets, trackballs @@ -179,29 +218,31 @@
-
Sound card: +
Sound card
+ + +
The installer will use the default driver if one is available.
- -
The installer uses the default driver, if there is a default one. The option - to select a different driver is only given when there is more than one - driver for your card, but none of them is the default one. + +
If there is no actual default driver for your sound card, there may be other + possible alternative drivers available to choose from. If this is the case, + but you think the installer has not made the most appropriate choice, you + can click on Advanced to manually specify a driver.
-
Graphical interface: -
+
Graphical interface
-
This section allows you to configure your graphic card(s) and displays. -
+
This section allows you to configure your graphics card(s) and displays. For + more information, see the section called „Konfiguracija grafičke kartice i monitora“
-
For more information, see the section called „Konfiguracija grafičke kartice i monitora“. -
+

@@ -227,13 +268,12 @@

-
Network: -
+
Network

You can configure your network here, but for network cards with non-free - drivers it is better to do that after reboot, in the Mageia - Control Center, if you have not yet enabled the Nonfree media + drivers it is better to do that after reboot, using the Mageia Control + Center, if you have not yet enabled the Nonfree media repositories.
@@ -247,7 +287,7 @@ -
When you add a network card, do not forget to set your firewall to watch +
When you add a network card, do not forget to set your firewall to monitor that interface as well.
@@ -259,18 +299,17 @@
-
Proxies: -
+
Proxies

A Proxy Server acts as an intermediary between your computer and the wider - internet. This section allows you to configure your computer to utilize a + Internet. This section allows you to configure your computer to utilize a proxy service.
-
You may need to consult your systems administrator to get the parameters you - need to enter here +
You may need to consult your systems administrator to obtain the parameters + you need to enter here.

-
Security Level: -
- - -
Here you set the Security level for your computer, in most cases the default - setting (Standard) is adequate for general use. -
+
Security Level
-
Check the option which best suits your usage. +
The Security level for your computer, in most cases the default setting + (Standard) is adequate for general use. Select the option which best suits + your usage.

Firewall: +

Firewall

+ + +

The firewall allows you to manage which network connections are allowed on + your computer. The safe and secure default is to allow ZERO inbound + connections. This does not stop you connecting outbound and using your + computer normally.

A firewall is intended to be a barrier between your important data and the - rascals out there on the internet who would compromise or steal it. +

Please be aware that the Internet is a high risk network where there are + continuous attempts to probe and attack systems. Even seemingly + „safe“ connections such as ICMP (for ping) have been used as + covert data channels for exfiltrating data by malicious persons.

Select the services that you wish to have access to your system. Your - selections will depend on what you use your computer for. +

For more information, see Firewall.

@@ -334,7 +376,8 @@ -

Bear in mind that allowing everything (no firewall) may be very risky. +

Bear in mind that allowing everything (no firewall) may + be very risky.

diff --git a/hr/securityLevel.html b/hr/securityLevel.html index 43ee553..bcef169 100644 --- a/hr/securityLevel.html +++ b/hr/securityLevel.html @@ -7,7 +7,7 @@ - -

Glavne postavke bootloadera +

Bootloader

+ + + + + + + + + + @@ -31,11 +41,11 @@ -

With a Bios system +

Grub2

@@ -43,39 +53,73 @@ -

If you prefer different bootloader settings to those chosen automatically by - the installer, you can change them here. -

- - -

You may already have another operating system on your machine, in which case - you need to decide whether to add Mageia to your existing bootloader, or - allow Mageia to create a new one. -

Grub2 on Legacy MBR/GPT systems

+ +
GRUB2 (with or without graphical menu) will be used exclusively as the + bootloader for a Legacy/MBR or Legacy/GPT system. +
+ +
+ +
By default, a new bootloader will be written into either the MBR (Master + Boot Record) of your first hard drive or in the BIOS boot partition. +
+ +

- - - - - - - - -


	- - The Mageia graphical menus are nice : - -

Grub2-efi on UEFI systems

+ +
GRUB2-efi will be used exclusively as the bootloader for a UEFI system.
+ +
+ +
By default, a new bootloader (Grub2-efi) will be written into the ESP (EFI + System Partition). +
+ + +
If there are already UEFI-based operating systems installed on your computer + (Windows 8 for example), the Mageia installer will detect the existing ESP + created by Windows and add grub2-efi to it. If no ESP exists, then one will + be created. Although it is possible to have several ESPs, only one is + required, whatever the number of operating systems you have. +
+ +

+ +

+ + +

Bootloader Setup +

+ -

Using a Mageia bootloader +

Glavne postavke bootloadera

@@ -83,50 +127,133 @@ -

By default, Mageia writes a new GRUB (legacy) bootloader into the MBR - (Master Boot Record) of your first hard drive. If you already have other - operating systems installed, Mageia attempts to add them to your new Mageia - boot menu. -

Mageia now also offers GRUB2 as an optional bootloader in addition to GRUB - legacy and Lilo. -

+ +
Bootloader to use
+ + +
This feature is only available to Legacy MBR/BIOS systems. Users of UEFI + systems will not see this option here. +
+ +
+ +
Boot device
+ + +
Don't change this unless you really know what you are doing
+ +
+ +
Delay before booting the default image
+ + +
This text box lets you set a delay, in seconds, before the default operating + system is started up. +
+ +
+ +
Security
+ + +
This allows you to set a password for the bootloader. This means a username + and password will be required when booting in order to select a booting + entry or change settings. This is optional, and most people are not likely + to have a need for it. The username is root and the + password is the one chosen hereafter. +
+ +
+ +
Password
+ + +
Choose a password for the bootloader (optional)
+ +
+ +
Password (again)
+ + +
Retype the password and DrakX will check that it matches with the one set + above +
+ +

- - - - - - - - -

- -

Linux systems which use the GRUB2 bootloader are not currently supported by - GRUB (legacy) and will not be recognized if the default GRUB bootloader is - used. -

- - -

The best solution here is to use the GRUB2 bootloader which is available at - the Summary page during installation. -

- -

Advanced

+ + +

+ +
Enable ACPI
+ + +
ACPI (Advanced Configuration and Power Interface) is a standard for power + management. It can save energy by stopping unused devices. Deselecting it + could be useful if, for example, your computer does not support ACPI or if + you think the ACPI implementation might cause some problems (for instance + random reboots or system lockups). +
+ +
+ +
Enable SMP
+ + +
This option enables/disables symmetric multiprocessing for multi-core + processors +
+ +
+ +
Enable APIC
+ + +
Enabling this gives the operating system access to the Advanced Programmable + Interrupt Controller. APIC devices permit more complex priority models, and + Advanced IRQ (Interrupt Request) management. +
+ +
+ +
Enable Local APIC
+ + +
Here you can set Local APIC, which manages all external interrupts for a + specific processor in an SMP system +
+ +

Using an existing bootloader +

Bootloader Configuration

@@ -134,58 +261,100 @@ -

If you decide to use an existing bootloader then you will need to remember - to STOP at the summary page during the installation and click the Bootloader - Configure button, which will allow you to change the - bootloader install location. -

Do not select a device e.g."sda", or you will overwrite your existing - MBR. You must select the root partition that you chose during the - partitioning phase earlier, e.g. sda7. -

+ +
Default
+ + +
The operating system to be started up by default.
+ +
+ +
Append
+ + +
This option lets you pass information to the kernel or tell the kernel to + give you more information as it boots. +
+ +
+ +
Probe foreign OS
+ + +
If you already have other operating systems installed, Mageia attempts to + add them to your new Mageia boot menu. If you don't want this behaviour, + then untick the Probe Foreign OS option. +
+ +

To be clear, sda is a device, sda7 is a partition on that device. -

Advanced

- - - - - - - - -


	- - Go to tty2 with Ctrl+Alt+F2 and type `df` to check where - your `/` (root) partition is. Ctrl+Alt+F7 takes you back to - the installer screen. - - -

+ + +

+ +
Video mode
+ + +
This sets the screen size and colour depth to be used by the boot menu. If + you click the down-triangle you will be offered other size and colour depth + options. +
+ +
+ +
Do not touch ESP or MBR
+ + +
Select this option if you don't want a bootable Mageia, but would rather + chain-load it from another OS. You will get a warning that the bootloader is + missing. Click Ok if you are sure you understand the + implications, and wish to proceed. +
+ +

The exact procedure for adding your Mageia system to an existing bootloader - is beyond the scope of this help, however in most cases it will involve - running the relevant bootloader installation program which should detect and - add it automatically. See the documentation for the operating system in - question. -

+ +

+ + +

Other Options +

+ -

Bootloader advanced option +

Using an existing bootloader

@@ -193,47 +362,74 @@ -

If you have very limited disk space for the / partition - that contains /tmp, click on - Advanced and check the box for Clean /tmp - at each boot. This helps to maintain some free space. +

The exact procedure for adding Mageia to an existing bootloader is beyond + the scope of this documentation. However in most cases it will involve + running the relevant bootloader installation program, which should detect + Mageia and automatically add an entry for it in the bootloader menu. See the + documentation for the relevant operating system.

- -

- - -

+ + +

With an UEFI system -

Installing Without a Bootloader +

+ + + +

While you can opt to install Mageia without a bootloader (see section 2.1 + Advanced), this is not recommended unless you absolutely know what you are + doing, as without some form of bootloader your operating system will be + unable to start. +

- - - -

With an UEFI system, the user interface is slightly different as you cannot - choose the boot loader since only Grub2-efi is available. -

- - - - -

If Mageia is the first system installed on your computer, the installer - created an ESP (EFI System Partition) to receive the bootloader - (Grub2-efi). If there was already UEFI operating systems previously - installed on your computer (Windows 8 for example), the Mageia installer - detected the existing ESP created by Windows and added grub2-efi. Although - it is possible to have several ESPs, only one is advised and enough whatever - the number of operating systems you have. -

Don't modify the "Boot Device" unless really knowing what you do.

Add or Modify a Boot Menu Entry +

+ + + + + +

To do this you need to manually edit /boot/grub2/custom.cfg or use the + software grub-customizer tool instead + (available in the Mageia repositories). +

+ + +

+ + + + + + + + +


	+ + For more information, see: https://wiki.mageia.org/en/Grub2-efi_and_Mageia + +

+ +

diff --git a/hr/setupSCSI.html b/hr/setupSCSI.html index a1117a9..6f80ee6 100644 --- a/hr/setupSCSI.html +++ b/hr/setupSCSI.html @@ -31,25 +31,29 @@ + + + + + + + - - -

DrakX usually detects hard disks correctly. With some older SCSI controllers - it may be unable to determine the correct drivers to use and subsequently - fail to recognise the drive. -

If this happens, you will need to manually tell Drakx which SCSI drive(s) - you have. +

DrakX will normally detect hard disks correctly. However, with some older + SCSI controllers it may be unable to determine the correct drivers to use + and subsequently fail to recognise the drive.

DrakX should then be able to configure the drive(s) correctly. +

If your device is not recognised, you will need to manually tell DrakX which + SCSI drive(s) you have. DrakX should then be able to configure the drive(s) + correctly.

diff --git a/hr/software.html b/hr/software.html new file mode 100644 index 0000000..96c39f1 --- /dev/null +++ b/hr/software.html @@ -0,0 +1,427 @@ + + + + + Software + + + + + + +

Software +

+ + + + + + +

Media Selection +

+ + + +

Supplemental Installation Media +

+ + + + + + + + + + + + + + + +

This screen shows you the list of already recognised repositories. You can + add other sources for packages, like an optical-disc or a remote source. + The source selection determines which packages will be available during the + subsequent steps. +

+ + +

Za mrežni izvor, postoje dva koraka koja trba slijediti:

+ + +

+ +
Choosing and activating the network, if not already up.
+ +
+ +
Selecting a mirror or specifying a URL (very first entry). By selecting a + mirror, you have access to the selection of all repositories managed by + Mageia, like the Nonfree, the + Tainted repositories and the + Updates. With the URL, you can designate a specific + repository or your own NFS installation. +
+ +

+ + +

+ + + + + + + + +

+ +

If you are updating a 64-bit installation which may contain some 32-bit + packages, it is advised to use this screen to add an online mirror by + selecting one of the Network protocols here. The 64-bit DVD ISO only + contains 64-bit and noarch packages, it will not be + able to update the 32-bit packages. However, after adding an online mirror, + the installer will find the needed 32-bit packages there. +

+ +

+ + +

Available Media +

+ + + + + + + + + + + + + + + + + +

Aquí teniu una llista de tots els dipòsits disponibles. No tots els dipòsits + estan disponibles, depenent del mitjà que feu servir per a la + instal·lació. La selecció dels dipòsits determina quins paquets es + proposaran per a seleccionar durant els següents passos. +

+ + +

+ +
No es pot inhabilitar el dipòsit core, ja que conté la + base de la instal·lació. +
+ +
+ +
The Nonfree repository includes packages that are + free-of-charge, i.e. Mageia may redistribute them, but they contain + closed-source software (hence the name - Nonfree). For example this + repository includes nVidia and AMD graphics card proprietary drivers, + firmware for various WiFi cards, etc. +
+ +
+ +
The Tainted repository includes packages released under + a free license. The main criteria for placing packages in this repository is + that they may infringe patents and copyright laws in some countries, + e.g. multimedia codecs needed to play various audio/video files; packages + needed to play commercial video DVD's, etc. +
+ +

+ +

+ + +

Odabir radnog okruženja +

+ + + + + + + + + + + + + + + +

Some choices made here will open other screens with related options.

+ + +

After the selection step(s), you will see a slideshow during the + installation of required packages. The slideshow can be disabled by pressing + the Details button. +

+ + + + +

+ +
Choose whether you prefer to use the KDE Plasma or GNOME desktop + environment. Both come with a full set of useful applications and tools. +
+ +
+ +
Select Custom if you do not wish to use either (or, + actually use both) of these, or if you want to modify the default software + choices for these desktop environments. The LXDE desktop, for instance, is + lighter than the previous two, sporting less eye candy and having fewer + packages installed by default. +
+ +

+ +

+ + +

Odabir grupe paketa +

+ + + + + + + + + +

Packages are arranged into common groups, to make choosing what you need on + your system a lot easier. The groups are fairly self explanatory, however + more information about the content of each is available in tool-tips which + become visible as the mouse is hovered over them. +

+ + +

+ +
Workstation
+ +
+ +
Server
+ +
+ +
Graphical Environment
+ +
+ +
Individual Package Selection: you can use + this option to manually add or remove packages +
+ +

+ + +

See Minimal Install for instructions on how to do a + minimal install (without or with X & IceWM). +

+ +

+ + +

Minimal Install +

+ + + + + + + + + + + + + + + + + + +

Minimal Installation is intended for those with specific uses in mind for + Mageia, such as a server or a specialised workstation. You will probably use + this option combined with the Individual package + selection option to fine-tune your installation. See Choose Packages Tree. +

+ + +

+ +
You can choose a Minimal Installation by de-selecting + everything in the Package Group Selection screen, see + Choose Package Groups. +
+ + +
If desired, you can additionally tick the Individual package + selection option in the same screen. +
+ +
+ +
If you choose this installation method, then the relevant screen (see + screenshot below) will offer you a few useful extras to install, such as + documentation and „X“. +
+ + +
If the With X option is selected, then IceWM (a + lightweight desktop environment) will also be included. +
+ +

+ + +

The basic documentation is provided in the form of „man“ and + „info“ pages. It contains the man pages from the Linux Documentation + Project and the GNU + coreutils info pages. +

+ + + +

+ + +

Izaberi pojedinačne pakete +

+ + + + + + + + + + + +

Here you can add or remove any extra packages to customize your + installation. +

+ + +

After having made your choice, you can click on the + floppy icon at the bottom of the page to save your + choice of packages (saving to a USB key works, too). You can then use this + file to install the same packages on another system, by pressing the same + button during install and choosing to load it. +

+ +

+ + diff --git a/hr/soundConfig.html b/hr/soundConfig.html index 52d39c6..04a6daa 100644 --- a/hr/soundConfig.html +++ b/hr/soundConfig.html @@ -22,6 +22,7 @@

+ @@ -30,25 +31,18 @@ -

In this screen the name of the driver that the installer chose for your - sound card is given, which will be the default driver if we have a default - one. - -

+ -

The default driver should work without problems. However, if after install - you do encounter problems, then run draksound or start - this tool via MCC (Mageia Control Center), by choosing the - Hardware tab and clicking on Sound - Configuration at the top right of the screen. - +

This screen shows the details of the sound card driver chosen for you by the + installer, and this driver should work without problems.

+ -

Then, in the draksound or "Sound Configuration" tool screen, click on - Advanced and then on - Troubleshooting to find very useful advice about how - to solve the problem. - +

However, if you encounter any issues post-install, then run + draksound or start this tool via Mageia Control Center → Hardware → Sound Configuration. Then, in the + draksound or Sound Configuration + screen, click on Troubleshooting to find useful advice + about how to solve the problem.

@@ -64,18 +58,11 @@ -

Clicking Advanced in this screen, during install, is - useful if there is no default driver and there are several drivers - available, but you think the installer selected the wrong one. - +

If there is no actual default driver for your sound card, there may be other + possible alternative drivers available to choose from. If this is the case, + but you think the installer has not made the most appropriate choice, you + can click on Advanced to manually specify a driver.

- - -

In that case you can select a different driver after clicking on - Let me pick any driver. - -

diff --git a/hr/uninstall-Mageia.html b/hr/uninstall-Mageia.html index a0bdeba..cda497d 100644 --- a/hr/uninstall-Mageia.html +++ b/hr/uninstall-Mageia.html @@ -24,56 +24,46 @@ + -

Howto -

- - - -

If Mageia didn't convince you or you can't install it correctly, in short - you want get rid of it. That is your right and Mageia also gives you the - possibility to uninstall. This is not true for every operating system. -

- - -

After your data backup, reboot your installation Mageia DVD and select - Rescue system, then, Restore Windows boot loader. At the next boot, you will - only have Windows with no option to choose your operating system. -

- - -

To recover the space used by Mageia partitions on Windows, click on - Start -> Control Panel -> Administrative Tools -> Computer Management - -> Storage -> Disk Management to access to the partition - management. You will recognize the Mageia partition because they are labeled - Unknown, and also by their size and place in the - disk. Right click on each of these partitions and select - Delete. The space will be freed. -

- - -

If you are using Windows XP, you can create a new partition and format it - (FAT32 or NTFS). It will get a partition letter. -

- - -

If you have Vista or 7, you have one more possibility, you can extend the - existing partition that is at the left of the freed space. There are other - partitioning tools that can be used, such as gparted, available for both - windows and linux. As always, when changing partitions, be very careful, and - make sure all important things have been backed up. -

- -

+ + +

If Mageia didn't convince you or you can't install it correctly - in short + you want get rid of it - that is your right and Mageia also gives you the + possibility to uninstall. This is not true for every operating system. +

+ + +

After backing up your data, reboot your Mageia installation DVD and select + Rescue system, then Restore Windows boot + loader. At the next boot, you will only have Windows, with no + option to choose your Mageia operating system. +

+ + +

In Windows, to recover the space used by Mageia partitions: click on + Start → Control + Panel → Administrative Tools → Computer Management → Storage → Disk + Management. You will recognise a Mageia + partition because they are labeled Unknown, and also by + their size and place on the disk. Right-click on each of these partitions + and select Delete to free up the space. +

+ + +

If you are using Windows XP, you can create a new partition and format it + (FAT32 or NTFS). It will then get a partition letter. +

+ + +

If you have Vista or 7, you have one more possibility, you can extend the + existing partition that is at the left of the freed space. There are other + partitioning tools that can be used, such as gparted, available for both Windows and Linux. As + always, when changing partitions, be very careful to back up anything + important to you. +

-- cgit v1.2.1


	+ + The Live Installer is simpler compared to the Classical Installer - but you + have fewer configuration options. + + +


	+ + Live ISOs can only be used to create „clean“ installations, + they cannot be used to upgrade previously installed Mageia releases. + + +