#!/usr/bin/perl
use strict;
use lib qw(/usr/lib/libDrakX);
use standalone;
use common;
use ugtk2 qw(:create :dialogs :helpers :wrappers);
use interactive;
#- convenience variables for true and false
my $true = 1;
my $in = 'interactive'->vnew('su');
my $window = ugtk2->new('DrakSplash');
$window->{rwindow}->signal_connect(delete_event => \&CloseAppWindow);
#- verification of package image magik
unless ($in->do_pkgs->is_installed('ImageMagick')) {
$in->ask_okcancel(N("Error"), N("package 'ImageMagick' is required to be able to complete configuration.\nClick \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"))
&& $in->do_pkgs->install('ImageMagick')
or CloseAppWindow();
}
#- application vars
my $tmp_path = '/tmp/draksplash/';
mkdir($tmp_path) if !-d $tmp_path;
my $thm_path = '/usr/share/bootsplash/themes/';
my $boot_conf_path = '/etc/bootsplash/themes/';
my $cfg_path = "/cfg/";
my $img_file;
my $prev_window;
my %font_size = ('h' =>16, 'w' =>8);
my %theme = ('name' => 'new_theme',
'res' => {
'res' => '800x600',
'h' => '600',
'w' => '800',
},
'boot_conf' => {
'tx' => 0,
'ty' => 0,
'tw' => 0,
'th' => 0,
'px' => 0,
'py' => 0,
'pw' => 0,
'ph' => 0,
'pc' => '0x21459d',
},
'boot_img' => ''
);
my %scale_size = ('tx' => ($theme{res}{w} / $font_size{w}),
'ty' => ($theme{res}{h} / $font_size{h}),
'tw' => ($theme{res}{w} / $font_size{w}),
'th' => ($theme{res}{h} / $font_size{h}),
'px' => $theme{res}{w},
'py' => $theme{res}{h},
'pw' => $theme{res}{w},
'ph' => $theme{res}{h},
);
my %first = ('frame' => Gtk2::Frame->new(N("first step creation")),
'widget' => {
'label' => {
'res' => N("final resolution"),
'file' => N("choose image file"),
'name' => N("Theme name")
},
'button' => {
#'boot_conf' => N("Make bootsplash step 2"),
#'lilo_conf' => N("Go to lilosplash configuration"),
'file' => N("Browse"),
},
'combo' => {
'res' => ['800x600', '1024x768', '1280x1024'],
'name' => [ $theme{name}, giv_exist_thm() ]
},
extras => {
res => {
noneditable => 1,
},
},
},
'pos' => [ 'name', 'res', 'file', 'boot_conf', #'save', #'kill'
],
);
my %boot_conf_frame = ('frame' => Gtk2::Frame->new(N("Configure bootsplash picture")),
'widget' => {
'label' => {
'tx' => N("x coordinate of text box\nin number of characters"),
'ty' => N("y coordinate of text box\nin number of characters"),
'tw' => N("text width"),
'th' => N("text box height"),
'px' => N("the progress bar x coordinate\nof its upper left corner"),
'py' => N("the progress bar y coordinate\nof its upper left corner"),
'pw' => N("the width of the progress bar"),
'ph' => N("the height of the progress bar"),
'pc' => N("the color of the progress bar")
},
#- must set scale values to true to get them created by mk_frame
'scale' => {
'tx' => 1,
'ty' => 1,
'tw' => 1,
'th' => 1,
'px' => 1,
'py' => 1,
'pw' => 1,
'ph' => 1,
},
'button' => {
#'annul' => N("Go back"),
'prev' => N("Preview"),
'kill' => N("Quit"),
'save' => N("Save theme"),
'pc' => N("Choose color"),
},
'check' => {
'logo' => N("Display logo on Console"),
'quiet' => N("Make kernel message quiet by default"),
},
},
'pos' => [ 'tx',
'ty',
'tw',
'th',
'px',
'py',
'pw',
'ph',
'pc',
'logo',
'quiet',
# 'annul',
'prev',
'save',
'kill',
],
);
#- var action is used to hide/show the correct frame
$first{frame}->add(mk_frame(\%first));
my $first_vbox = Gtk2::VBox->new(0, 5);
#****************************- Signal event actions
#- change resolution
$first{widgets}{combo}{res}->entry->signal_connect(changed => sub {
$theme{res}{res} = $first{widgets}{combo}{res}->entry->get_text;
($theme{res}{w}, $theme{res}{h}) = $theme{res}{res} =~ /([^x]+)x([^x]+)/;
&set_scale_size;
$boot_conf_frame{frame}->destroy;
$boot_conf_frame{frame} = Gtk2::Frame->new(N("Configure bootsplash picture"));
&make_boot_frame;
$first_vbox->add($boot_conf_frame{frame});
member($theme{name}, giv_exist_thm()) && thm_in_this_res() && get_this_thm_res_conf() || $in->ask_warn(N("Notice"), N("This theme does not yet have a bootsplash in %s !", $theme{res}{res}));
});
#- go to bootsplash configuration step 2
#$first{widgets}{button}{boot_conf}->signal_connect(clicked => sub{show_act(\%boot_conf_frame) } );
#- image file selection for new theme
$first{widgets}{button}{file}->signal_connect(clicked => sub {
my $file_dialog = gtkset_modal(Gtk2::FileSelection->new(N("choose image")), 1);
$file_dialog->set_transient_for($window->{rwindow});
$file_dialog->set_filename($img_file || '~/');
$file_dialog->cancel_button->signal_connect(clicked => sub { $file_dialog->destroy });
$file_dialog->ok_button->signal_connect(clicked => sub { $img_file = $file_dialog->get_filename; $file_dialog->destroy });
$file_dialog->show;
});
#- changing theme name
$first{widgets}{combo}{name}->entry->signal_connect(changed => sub { get_this_thm_res_conf(); $theme{name} = $first{widgets}{combo}{name}->entry->get_text });
#**************************************************
$first_vbox->add($first{frame});
$first_vbox->add($boot_conf_frame{frame});
&make_boot_frame;
# set window attributes and show it
unless ($::isEmbedded) {
$window->{rwindow}->set_border_width(5);
$window->{window}->add($first_vbox);
$window->{rwindow}->set_position('center');
$window->{rwindow}->show_all;
#&show_act(\%first);
}
# Gtk event loop
$window->main;
# Should never get here
ugtk2->exit(0);
### Callback function to close the window
sub CloseAppWindow() {
ugtk2->exit(0);
}
#- ====## used funtions ##=====
#- Desc => write config file for boot theme and copy image in the right location
sub write_boot_thm {
my $_w = $in->wait_message('', N("saving Bootsplash theme..."));
&set_thm_values;
my $logo = $boot_conf_frame{widgets}{check}{logo}->get_active ? 'yes' : 'no';
my $quiet = $boot_conf_frame{widgets}{check}{quiet}->get_active ? 'yes' : 'no';
my $globalconf_file = $boot_conf_path.$theme{name}.'/global.config';
my $cfg_file = $boot_conf_path . $theme{name} . "$cfg_path/bootsplash-" . $theme{res}{res} . '.cfg';
#- verify all dir exists or create them
foreach my $dir ($boot_conf_path . $theme{name} . $cfg_path, $thm_path.$theme{name} . '/images/') {
mkdir_p($dir) if !-d $dir;
}
#- copy image to dest by convert
system('convert -scale '.$theme{res}{res} . ' ' . $img_file . ' ' . $thm_path.$theme{name} . '/images/bootsplash-' . $theme{res}{res} . '.jpg');
system('/usr/share/bootsplash/scripts/rewritejpeg '.$thm_path.$theme{name}.'/images/bootsplash-'.$theme{res}{res}.'.jpg');
#- write conf files
output($cfg_file, qq(# This is the configuration file for the $theme{res}{res} bootsplash picture
# this file is necessary to specify the coordinates of the text box on the
# splash screen.
# tx is the x coordinate of the text window in characters. default is 24
# multiply width font width for coordinate in pixels.
tx=$theme{boot_conf}{tx}
# ty is the y coordinate of the text window in characters. default is 14
ty=$theme{boot_conf}{ty}
# tw is the width of the text window in characters. default is 130
# note: this should at least be 80 as on the standard linux text console
tw=$theme{boot_conf}{tw}
# th is the height of the text window in characters. default is 44
# NOTE: this should at least be 25 as on the standard linux text console
th=$theme{boot_conf}{th}
# px is the progress bar x coordinate of its upper left corner
px=$theme{boot_conf}{px}
# py is the progress bar y coordinate of its upper left corner
py=$theme{boot_conf}{py}
# pw is the with of the progress bar
pw=$theme{boot_conf}{pw}
# ph is the height of the progress bar
ph=$theme{boot_conf}{ph}
# pc is the color of the progress bar
pc=$theme{boot_conf}{pc}));
output($globalconf_file, qq(# Display logo on console.
LOGO_CONSOLE=$logo
# Make kernel message quiet by default.
QUIET=$quiet));
}
#- Desc => read the current bootsplash theme configuration if exist
sub get_this_thm_res_conf() {
member($first{widgets}{combo}{name}->entry->get_text, giv_exist_thm())
and $theme{name} = $first{widgets}{combo}{name}->entry->get_text
and thm_in_this_res(1)
and read_boot_conf();
my $file = $thm_path.$theme{name}."/images/bootsplash-".$theme{res}{res}.".jpg";
$img_file = $file if -f $file;
return 1;
}
sub read_boot_conf {
chdir($boot_conf_path);
my $file = $theme{name} . "/$cfg_path/bootsplash-" . $theme{res}{res} . '.cfg';
if (-f $file) {
$theme{boot_conf} = { getVarsFromSh($file) };
&set_scale_values;
}
}
my %adj;
sub set_scale_values() {
foreach (keys %{$theme{boot_conf}}) {
$adj{$_} and $adj{$_}->set_value($theme{boot_conf}{$_});
}
}
#- Desc => check if this theme is available in the current resolution else
#- change the current resolution or display a ask_warn box
#- Args => ø
#- return=> (bool)
sub thm_in_this_res {
my ($check_res) = @_;
(-f $thm_path.$theme{name}."/images/bootsplash-".$theme{res}{res}.".jpg") ? return 1 : $check_res == 1 ? return which_res_exist() : return 0;
}
sub which_res_exist() {
chdir($thm_path.$theme{name}."/images/");
my $is_ok = 0;
foreach (@{$first{widget}{combo}{res}}) {
next if !-f "bootsplash-$_.jpg";
$is_ok = 1;
$first{widgets}{combo}{res}->entry->set_text($_);
last;
}
$is_ok == 1 or $in->ask_warn(N("Notice"), N("This theme does not yet have a bootsplash in %s !", $theme{res}{res})) and return 0;
return 1;
}
#- Desc => retrieve all installed theme
#- Args => ø
#- Return=> @arr of available theme
sub giv_exist_thm() {
chdir($thm_path);
my @thms_dirs;
foreach (glob("*")) {
-d $_ && m/^[^.]/
and push @thms_dirs, $_;
}
return @thms_dirs;
}
#- Desc => show only the right frame
#- Args => action(str)
#- Return=> (bool)
sub show_act {
# my ($action) = @_;
# foreach (@action_frame){
# if($_ == $action){
# $_->{frame}->show_all ;
# }else{
# $_->{frame}->hide;
# }
# }
}
#- Desc => just add tooltips
#- Args => name of widget(str) and frame to work on it (\%hash)
sub tool_tip {
my ($name, $ref) = @_;
foreach (keys %{$ref->{widget}}) {
$_ eq 'tooltip' and next;
if ($ref->{widget}{$_}{$name}) {
! $adj{$name.'_tip'} and $adj{$name.'_tip'} = Gtk2::Tooltips->new;
$adj{$name.'_tip'}->set_tip($ref->{widgets}{$_}{$name}, $ref->{widget}{tooltip}{$name}, '');
}
}
}
#- Desc => just prepare widgets for a fram hash
#- Args => $box(a Vbox widget to contain all widgets), \%frame (hash with complete definition of the frame)
#- Return=> all hash{widgets} are created and packed in $box
sub mk_frame {
my ($ref) = @_;
my @buttons;
my $u = create_packtable({ col_spacings => 10, row_spacings => 5 },
map {
my @widgets;
my $pos = $_;
#- look for label
if ($ref->{widget}{label}{$pos}) {
my $w = $ref->{widgets}{label}{$pos} = Gtk2::Label->new($ref->{widget}{label}{$pos});
push @widgets, $w;
}
#- look for scale
if ($ref->{widget}{scale}{$pos}) {
my $w = $ref->{widgets}{scale}{$pos} = Gtk2::HScale->new($adj{$pos} = Gtk2::Adjustment->new(0, 0, $scale_size{$pos}, 1, 10, 0));
$ref->{widgets}{scale}{$pos}->set_digits(0);
push @widgets, $w;
}
$adj{$pos} and $adj{$pos}->set_value($theme{boot_conf}{$pos});
#- look for combo
my @popdown;
if ($ref->{widget}{combo}{$pos}) {
@popdown = @{$ref->{widget}{combo}{$pos}};
my $w = $ref->{widgets}{combo}{$pos} = $ref->{widget}{extras}{$pos}{noneditable} ? Gtk2::ComboBox->new_text : Gtk2::Combo->new;
$w->set_popdown_strings(@popdown);
$w->set_active(0) if $w->isa('Gtk2::ComboBox');
push @widgets, $w;
}
#- look for checkbox
if ($ref->{widget}{check}{$pos}) {
my $w = $ref->{widgets}{check}{$pos} = Gtk2::CheckButton->new($ref->{widget}{check}{$pos});
$ref->{widgets}{check}{$pos}->set_active(1);
push @widgets, $w;
}
#- look for button
if ($ref->{widget}{button}{$pos}) {
my $w = $ref->{widgets}{button}{$pos} = Gtk2::Button->new($ref->{widget}{button}{$pos});
@widgets ?
push @widgets, $w
: push @buttons, $w;
}
#- look for tooltips
$ref->{widget}{tooltip}{$pos} and tool_tip($pos, \%$ref);
if_(@widgets, \@widgets);
} @{$ref->{pos}}
);
gtkpack__(Gtk2::VBox->new,
gtkset_border_width($u, 3),
@buttons);
}
#- Desc => take a decimal value between 0 to 255 and return the corresponding hexadecimal value
sub dec2hex {
my ($dec) = @_;
my @dec_hex = (0..9, 'A', 'B', 'C', 'D', 'E', 'F');
my $int;
my $float;
$dec = $dec/16;
$int = int($dec);
$float = $dec_hex[int(($dec-$int)*16)];
$int = $dec_hex[$int];
return "$int$float";
}
#- Desc => prepare and set all signal_connect for boot_frame widget
sub make_boot_frame() {
$boot_conf_frame{frame}->add(mk_frame(\%boot_conf_frame));
#- open a color choose box
$boot_conf_frame{widgets}{button}{pc}->signal_connect(clicked => sub {
my $color = gtkshow(Gtk2::ColorSelectionDialog->new(N("ProgressBar color selection")));
my @rgb = map { hex($_)/255 } ($1, $2, $3) if $theme{boot_conf}{pc} =~ m/0x(.{2})(.{2})(.{2})/;
$color->colorsel->set_current_color(gtkcolor(@rgb));
$color->cancel_button->signal_connect(clicked => sub { $color->destroy });
$color->ok_button->signal_connect(clicked => sub {
my $colour = $color->colorsel->get_current_color;
@rgb = map { dec2hex($_*255) } ($colour->red, $colour->green, $colour->blue);
$theme{boot_conf}{pc} = "0x$rgb[0]$rgb[1]$rgb[2]";
$color->destroy;
});
});
#- quit button
$boot_conf_frame{widgets}{button}{kill}->signal_connect(clicked => \&CloseAppWindow);
$boot_conf_frame{widgets}{button}{save}->signal_connect(clicked => \&write_boot_thm);
#- return to first screen
#$boot_conf_frame{widgets}{button}{annul}->signal_connect(clicked => sub { show_act( \%first ) } );
#- made a preview
$boot_conf_frame{widgets}{button}{prev}->signal_connect(clicked => sub {
unless (-f $img_file) {
$in->ask_warn(N("Notice"), N("You must choose an image file first!"));
return 0;
}
#- calculation of the 2 angle of text box and progress bar
set_thm_values();
my $_w = $in->wait_message('', N("Generating preview ..."));
my $txt_tl_xx = $theme{boot_conf}{tx}*$font_size{w};
my $txt_tl_yy = $theme{boot_conf}{ty}*$font_size{h};
my $txt_width = $theme{boot_conf}{tw}*$font_size{w};
my $txt_height = $theme{boot_conf}{th}*$font_size{h};
my $prog_tl_xx = $theme{boot_conf}{px};
my $prog_tl_yy = $theme{boot_conf}{py};
my $prog_width = $theme{boot_conf}{pw};
my $prog_height = $theme{boot_conf}{ph};
show_prev($txt_tl_xx, $txt_tl_yy, $txt_width, $txt_height, $prog_tl_xx, $prog_tl_yy, $prog_width, $prog_height);
});
$boot_conf_frame{frame}->show_all;
# - check scales values are possibly correct
#&set_scale_values;
foreach my $k (keys %{$theme{boot_conf}}) {
$k =~ m/[tp][hwyx]/
and $adj{$k}->signal_connect(value_changed => \&check_boot_scales);
}
}
#- Desc => set theme values from user entry (scales widgets)
sub set_thm_values() {
foreach (keys %{$theme{boot_conf}}) {
m/[tp][hwyx]/
and $theme{boot_conf}{$_} = int($adj{$_}->get_value);
}
}
#- Desc => destroy properly all widget of preview window
#- Desc => create a new window with a preview of splash screen
#- Args => $img_file (str) full path to preview file
sub show_prev {
my ($txt_tl_xx, $txt_tl_yy, $txt_width, $txt_height, $prog_tl_xx, $prog_tl_yy, $prog_width, $prog_height) = @_;
$prev_window ||= Gtk2::Window->new('toplevel');
$prev_window->set_title(
#-PO: First %s is theme name, second %s (in parenthesis) is resolution
N("%s BootSplash (%s) preview", $theme{name}, $theme{res}{res}));
my $prev_pic;
eval { $prev_pic = gtkcreate_pixbuf($img_file) };
if (my $err = $@) {
err_dialog(N("Error"),
#-PO: Do not alter the and tags
N("The image \"%s\" cannot be load due to the following issue:\n\n%s", $img_file, $err),
{ use_markup => 1 }
);
return;
}
$prev_pic->scale_simple($theme{res}{w}, $theme{res}{h}, 'hyper');
$prev_window->add(Gtk2::Image->new_from_pixbuf($prev_pic));
$prev_window->signal_connect(delete_event => sub {
$prev_window->destroy; undef($prev_window);
undef($prev_pic);
});
$prev_window->show_all;
}
#- Desc => define the max size of boot's scales
sub set_scale_size() {
%scale_size = ('tx' => ($theme{res}{w} / $font_size{w}),
'ty' => ($theme{res}{h} / $font_size{h}),
'tw' => ($theme{res}{w} / $font_size{w}),
'th' => ($theme{res}{h} / $font_size{h}),
'px' => $theme{res}{w},
'py' => $theme{res}{h},
'pw' => $theme{res}{w},
'ph' => $theme{res}{h},
);
}
#- Desc => verify that boot's scales widgets are correctly set
#- Args => $obj (str) is the scale to check value
sub check_boot_scales {
my ($obj) = @_;
my $tw = $adj{tw}->get_value;
my $tx = $adj{tx}->get_value;
my $th = $adj{th}->get_value;
my $ty = $adj{ty}->get_value;
my $pw = $adj{pw}->get_value;
my $ph = $adj{ph}->get_value;
my $px = $adj{px}->get_value;
my $py = $adj{py}->get_value;
my $max_xx = $scale_size{tw};
my $max_yy = $scale_size{th};
my $max_xres = $theme{res}{w};
my $max_yres = $theme{res}{h};
$obj eq 'tw' and $max_xx < $tw + $tx and $adj{tx}->set_value($max_xx - $tw);
$obj eq 'tx' and $max_xx < $tw + $tx and $adj{tw}->set_value($max_xx - $tx);
$obj eq 'th' and $max_yy < $th + $ty and $adj{ty}->set_value($max_yy - $th);
$obj eq 'ty' and $max_yy < $th + $ty and $adj{th}->set_value($max_yy - $ty);
$obj eq 'pw' and $max_xres < $pw + $px and $adj{px}->set_value($max_xres - $pw);
$obj eq 'px' and $max_xres < $pw + $px and $adj{pw}->set_value($max_xres - $px);
$obj eq 'ph' and $max_yres < $ph + $py and $adj{py}->set_value($max_yres - $ph);
$obj eq 'py' and $max_yres < $ph + $py and $adj{ph}->set_value($max_yres - $py);
}
f='#n479'>479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
2266
2267
2268
2269
2270
2271
2272
2273
2274
2275
2276
2277
2278
2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
2291
2292
2293
2294
2295
2296
2297
2298
2299
2300
2301
2302
2303
2304
2305
2306
2307
2308
2309
2310
2311
2312
2313
2314
2315
2316
2317
2318
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328
2329
2330
2331
2332
2333
2334
2335
2336
2337
2338
2339
2340
2341
2342
2343
2344
2345
2346
2347
2348
2349
2350
2351
2352
2353
2354
2355
2356
2357
2358
2359
2360
2361
2362
2363
2364
2365
2366
2367
2368
2369
2370
2371
2372
2373
2374
2375
2376
2377
2378
2379
2380
2381
2382
2383
2384
2385
2386
2387
2388
2389
2390
2391
2392
2393
2394
2395
2396
2397
2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
2418
2419
2420
2421
2422
2423
2424
2425
2426
2427
2428
2429
2430
2431
2432
2433
2434
2435
2436
2437
2438
2439
2440
2441
2442
2443
2444
2445
2446
2447
2448
2449
2450
2451
2452
2453
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
2468
2469
2470
2471
2472
2473
2474
2475
2476
2477
2478
2479
2480
2481
2482
2483
2484
2485
2486
2487
2488
2489
2490
2491
2492
2493
2494
2495
2496
2497
2498
2499
2500
2501
2502
2503
package printerdrake;
# $Id$
use diagnostics;
use strict;
use common;
use detect_devices;
use modules;
use network;
use log;
use printer;
1;
sub choose_printer_type {
my ($printer, $in) = @_;
$in->set_help('configurePrinterConnected') if $::isInstall;
my $queue = $printer->{OLD_QUEUE};
$printer->{str_type} = $printer::printer_type_inv{$printer->{TYPE}};
$printer->{str_type} =
$in->ask_from_list_(_("Select Printer Connection"),
_("How is the printer connected?") .
($printer->{SPOOLER} eq "cups" ?
_("
Printers on remote CUPS servers you do not have to configure here; these printers will be automatically detected.") : ()),
[ printer::printer_type($printer) ],
$printer->{str_type},
) or return 0;
$printer->{TYPE} = $printer::printer_type{$printer->{str_type}};
1;
}
sub setup_remote_cups_server {
my ($printer, $in) = @_;
# Check whether the network functionality is configured and
# running
if (!check_network($printer, $in)) {return 0};
$in->set_help('configureRemoteCUPSServer') if $::isInstall;
my $queue = $printer->{OLD_QUEUE};
#- hack to handle cups remote server printing,
#- first read /etc/cups/cupsd.conf for variable BrowsePoll address:port
my ($server, $port, $default, $autoconf);
# Return value: 0 when nothing was changed ("Apply" never pressed), 1
# when "Apply" was at least pressed once.
my $retvalue = 0;
while (1) {
# Read CUPS config file
my @cupsd_conf = printer::read_cupsd_conf();
foreach (@cupsd_conf) {
/^\s*BrowsePoll\s+(\S+)/ and $server = $1, last;
}
$server =~ /([^:]*):(.*)/ and ($server, $port) = ($1, $2);
# Read printer list
my @queuelist = printer::read_cups_printer_list($printer);
if ($#queuelist >=0) {
if ($printer->{DEFAULT} eq '') {
$default = printer::get_default_printer($printer);
if ($default) {
# If a CUPS system has only remote printers and no default
# printer defined, it defines the first printer whose
# broadcast signal appeared after the start of the CUPS
# daemon, so on every start another printer gets the
# default printer. To avoid this, make sure that the
# default printer is defined.
$printer->{DEFAULT} = $default;
printer::set_default_printer($printer);
}
} else {
$default = $printer->{DEFAULT};
}
my $queue;
for $queue (@queuelist) {
if ($queue =~ /^\s*$default/) {
$default = $queue;
}
}
# The default printer setting should not be "None" when there
# are printers
if ($default eq _("None")) {
$default = _("Choose a default printer!");
}
} else {
push(@queuelist, _("None"));
$default = _("None");
}
#- Did we have automatic or manual configuration mode for CUPS
$autoconf = printer::get_cups_autoconf();
#- Remember the server/port/autoconf settings to check whether the user
#- has changed them.
my $oldserver = $server;
my $oldport = $port;
my $oldautoconf = $autoconf;
#- then ask user for this combination and rewrite /etc/cups/cupsd.conf
#- according to new settings. There are no other point where such
#- information is written in this file.
if ($in->ask_from_
({ title => _("Remote CUPS server"),
messages => _("With remote CUPS servers, you do not have to configure any printer here; CUPS servers inform your machine automatically about their printers. All printers known to your machine currently are listed in the \"Default printer\" field. Choose the default printer for your machine there and click the \"Apply/Re-read printers\" button. Click the same button to refresh the list (it can take up to 30 seconds after the start of CUPS until all remote printers are visible). When your CUPS server is in a different network, you have to give the CUPS server IP address and optionally the port number to get the printer information from the server, otherwise leave these fields blank.") .
($::expert ? _("
Normally, CUPS is automatically configured according to your network environment, so that you can access the printers on the CUPS servers in your local network. If this does not work correctly, turn off \"Automatic CUPS configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not forget to restart CUPS afterwards (command: \"service cups restart\").") : ()),
cancel => _("Close"),
ok => _("Apply/Re-read printers"),
callbacks => { complete => sub {
unless (!$server || network::is_ip($server)) {
$in->ask_warn('',
_("The IP address should look like 192.168.1.20"));
return (1,0);
}
if ($port !~ /^\d*$/) {
$in->ask_warn('',
_("The port number should be an integer!"));
return (1,1);
}
return 0;
} }
},
[
{ label => _("Default printer"), val => \$default,
not_edit => 0, list => \@queuelist},
#{ label => _("Default printer") },
#{ val => \$default,
# format => \&translate, not_edit => 0, list => \@queuelist},
{ label => _("CUPS server IP"), val => \$server },
{ label => _("Port"), val => \$port },
($::expert ?
{ text => _("Automatic CUPS configuration"), type => 'bool',
val => \$autoconf } : ()),
]
)) {
# We have clicked "Apply/Re-read"
$retvalue = 1;
# Set default printer
if ($default =~ /^\s*([^\s\(\)]+)\s*\(/) {
$default = $1;
}
if (($default ne _("None")) &&
($default ne _("Choose a default printer!"))) {
$printer->{DEFAULT} = $default;
printer::set_default_printer($printer);
}
# Set BrowsePoll line
if (($server ne $oldserver) || ($port ne $oldport)) {
$server && $port and $server = "$server:$port";
if ($server) {
@cupsd_conf =
map { $server and
s/^\s*BrowsePoll\s+(\S+)/BrowsePoll $server/ and
$server = '';
$_ } @cupsd_conf;
$server and push @cupsd_conf, "\nBrowsePoll $server\n";
} else {
@cupsd_conf =
map { s/^\s*BrowsePoll\s+(\S+)/\#BrowsePoll $1/;
$_ } @cupsd_conf;
}
printer::write_cupsd_conf(@cupsd_conf);
}
# Set auto-configuration state
if ($autoconf != $oldautoconf) {
printer::set_cups_autoconf($autoconf);
}
} else {
last;
}
}
# Save user settings for auto-install
$printer->{BROWSEPOLLADDR} = $server;
$printer->{BROWSEPOLLPORT} = $port;
$printer->{MANUALCUPSCONFIG} = 1 - $autoconf;
return $retvalue;
}
sub setup_printer_connection {
my ($printer, $in) = @_;
# Choose the appropriate connection config dialog
my $done = 1;
for ($printer->{TYPE}) {
/LOCAL/ and setup_local ($printer, $in) and last;
/LPD/ and setup_lpd ($printer, $in) and last;
/SOCKET/ and setup_socket ($printer, $in) and last;
/SMB/ and setup_smb ($printer, $in) and last;
/NCP/ and setup_ncp ($printer, $in) and last;
/URI/ and setup_uri ($printer, $in) and last;
/POSTPIPE/ and setup_postpipe ($printer, $in) and last;
$done = 0; last;
}
return $done;
}
sub auto_detect {
my ($in) = @_;
{
my $w = $in->wait_message(_("Test ports"), _("Detecting devices ..."));
modules::get_alias("usb-interface") and eval { modules::load("printer"); sleep(2); };
foreach (qw(lp parport_pc parport_probe parport)) {
eval { modules::unload($_); }; #- on kernel 2.4 parport has to be unloaded to probe again
}
foreach (qw(parport_pc lp parport_probe)) {
eval { modules::load($_); }; #- take care as not available on 2.4 kernel (silent error).
}
}
my $b = before_leaving { eval { modules::unload("parport_probe") } };
detect_devices::whatPrinter();
}
sub wizard_welcome {
my ($in) = @_;
if ($in) {
$in->ask_okcancel(_("Local Printer"),
_("
Welcome to the Printer Setup Wizard
This wizard will help you to install your printer(s) connected to this computer.
Please plug in your printer(s) on this computer and turn it/them on. Click on \"Next\" when you are ready, and on \"Cancel\" when you do not want to set up your printer(s) now.
Note that some computers can crash during the printer auto-detection, use the \"Expert Mode\" of printerdrake to do a printer installation without auto-detection. You also need the \"Expert Mode\" when you want to set up printing on a remote printer when printerdrake does not list it automatically.")),
}
}
sub wizard_congratulations {
my ($in) = @_;
if ($in) {
$in->ask_okcancel(_("Local Printer"),
_("
Congratulations, your printer is now installed and configured!
You can print using the \"Print\" command of your application (usually in the \"File\" menu).
If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select \"Printer\" in the \"Hardware\" section of the Mandrake Control Center."))
}
}
sub setup_local {
my ($printer, $in) = @_;
my (@port, @str, $device);
my $queue = $printer->{OLD_QUEUE};
my $do_auto_detect = ((!$::expert) or
$in->ask_yesorno(_("Auto-Detection of Printers"),
_("Printerdrake is able to auto-detect your locally connected parallel and USB printers for you, but note that on some systems the auto-detection CAN FREEZE YOUR SYSTEM AND EVEN CORRUPT YOUR FILE SYSTEMS! So do it ON YOUR OWN RISK!
For local printers auto-detection is not really necessary, because they are external devices where you can easily see on their labels which models you have, but if you really want to auto-detect them, connect them and turn them on now and click \"Yes\", otherwise click \"No\"."),0));
my @parport;
my $menuentries;
$in->set_help('setupLocal') if $::isInstall;
if ($do_auto_detect) {
@parport = auto_detect($in);
for my $p (@parport) {
if ($p->{val}{DESCRIPTION}) {
my $menustr = $p->{val}{DESCRIPTION};
if ($p->{port} =~ m!^/dev/lp(\d+)$!) {
$menustr .= _(" on parallel port \#%s", $1);
} elsif ($p->{port} =~ m!^/dev/usb/lp(\d+)$!) {
$menustr .= _(", USB printer \#%s", $1);
}
if ($::expert) {
$menustr .= " ($p->{port})";
}
$menuentries->{$menustr} = $p->{port};
push @str, _("Detected %s", $menustr);
} else {
my $menustr;
if ($p->{port} =~ m!^/dev/lp(\d+)$!) {
$menustr = _("Printer on parallel port \#%s", $1);
} elsif ($p->{port} =~ m!^/dev/usb/lp(\d+)$!) {
$menustr = _("USB printer \#%s", $1);
}
if ($::expert) {
$menustr .= " ($p->{port})";
}
$menuentries->{$menustr} = $p->{port};
}
}
if ($::expert) {
@port = detect_devices::whatPrinterPort();
for my $q (@port) {
if (@str) {
my $alreadyfound = 0;
for my $p (@parport) {
if ($p->{port} eq $q) {
$alreadyfound = 1;
last;
}
}
if ($alreadyfound) {
next;
}
}
my $menustr;
if ($q =~ m!^/dev/lp(\d+)$!) {
$menustr = _("Printer on parallel port \#%s", $1);
} elsif ($q =~ m!^/dev/usb/lp(\d+)$!) {
$menustr = _("USB printer \#%s", $1);
}
if ($::expert) {
$menustr .= " ($q)";
}
$menuentries->{$menustr} = $q;
}
}
} else {
my $m;
for ($m = 0; $m <= 2; $m++) {
my $menustr = _("Printer on parallel port \#%s", $m);
if ($::expert) {
$menustr .= " (/dev/lp$m)";
}
$menuentries->{$menustr} = "/dev/lp$m";
$menustr = _("USB printer \#%s", $m);
if ($::expert) {
$menustr .= " (/dev/usb/lp$m)";
}
$menuentries->{$menustr} = "/dev/usb/lp$m";
}
}
my @menuentrieslist = sort { $menuentries->{$a} cmp $menuentries->{$b} }
keys(%{$menuentries});
my $menuchoice = "";
my $oldmenuchoice = "";
if (($printer->{configured}{$queue}) &&
($printer->{currentqueue}{'connect'} =~ m/^file:/)) {
$device = $printer->{currentqueue}{'connect'};
$device =~ s/^file://;
for my $p (keys %{$menuentries}) {
if ($device eq $menuentries->{$p}) {
$menuchoice = $p;
last;
}
}
} else {
$device = "";
}
if (($menuchoice eq "") && (@menuentrieslist > -1)) {
$menuchoice = $menuentrieslist[0];
$oldmenuchoice = $menuchoice;
if ($device eq "") {
$device = $menuentries->{$menuchoice};
}
}
if ($in) {
$::expert or $in->set_help('configurePrinterDev') if $::isInstall;
if ($#menuentrieslist < 0) { # No menu entry
if ($::expert) {
$device = $in->ask_from_entry
(_("Local Printer"),
_("No local printer found! To manually install a printer enter a device name/file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."),
{
complete => sub {
unless ($menuchoice ne "") {
$in->ask_warn('', _("You must enter a device or file name!"));
return (1,0);
}
return 0;
}
});
if ($device eq "") {
return 0;
}
} else {
$in->ask_warn(_("Local Printer"), _("No local printer found!"));
return 0;
}
} elsif (($#menuentrieslist == 0) && (!$::expert)) { # only one menu
# entry
return if !$in->ask_yesorno(_("Local Printer"),
_("Detected %s, do you want to set it up?", $menuentrieslist[0]), 1);
} else {
return if !$in->ask_from_(
{title => _("Local Printer"),
messages => (($do_auto_detect ?
($::expert ?
(@str ?
_("Here is a list of all auto-detected printers. ") : ()) .
_("Please choose the printer you want to set up or enter a device name/file name in the input line") :
(@str ?
_("Here is a list of all auto-detected printers. ") : ()) .
_("Please choose the printer you want to set up.")) :
($::expert ?
_("Please choose the port where your printer is connected to or enter a device name/file name in the input line") :
_("Please choose the port where your printer is connected to."))) .
($::expert ?
_(" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...).") :
())),
callbacks => {
complete => sub {
unless ($menuchoice ne "") {
$in->ask_warn('', _("You must choose/enter a printer/device!"));
return (1,0);
}
return 0;
},
changed => sub {
if ($oldmenuchoice ne $menuchoice) {
$device = $menuentries->{$menuchoice};
$oldmenuchoice = $menuchoice;
}
return 0;
}
}},
[
($::expert ?
{ val => \$device } : ()),
{ val => \$menuchoice, list => \@menuentrieslist,
not_edit => !$::expert, format => \&translate,
allow_empty_list => $::expert }
]
);
}
}
#- if CUPS is the spooler, make sure that CUPS knows the device
if ($printer->{SPOOLER} eq "cups") {
my $w = $in->wait_message
('', _("Making printer port available for CUPS ..."));
printer::assure_device_is_available_for_cups($device);
}
#- make the DeviceURI from $device.
$printer->{currentqueue}{'connect'} = "file:" . $device;
#- Read the printer driver database if necessary
if ((keys %printer::thedb) == 0) {
my $w = $in->wait_message('', _("Reading printer database ..."));
printer::read_printer_db($printer->{SPOOLER});
}
#- Search the database entry which matches the detected printer best
foreach (@parport) {
$device eq $_->{port} or next;
my $descr = $_->{val}{DESCRIPTION};
# Clean up the description from noise which makes the best match
# difficult
$descr =~ s/\s+Inc\.//;
$descr =~ s/\s+Corp\.//;
$descr =~ s/\s+SA\.//;
$descr =~ s/\s+S\.\s*A\.//;
$descr =~ s/\s+Ltd\.//;
$descr =~ s/\s+International//;
$descr =~ s/\s+Int\.//;
$descr =~ s/\s+\(?[Pp]rinter\)?$//;
$printer->{DBENTRY} =
bestMatchSentence ($descr, keys %printer::thedb);
# If the manufacturer was not guessed correctly, discard the
# guess.
$printer->{DBENTRY} =~ /^([^\|]+)\|/;
my $guessedmake = lc($1);
if (($descr !~ /$guessedmake/i) &&
(($guessedmake ne "hp") ||
($descr !~ /Hewlett[\s-]+Packard/i)))
{$printer->{DBENTRY} = ""};
}
1;
}
sub setup_lpd {
my ($printer, $in) = @_;
# Check whether the network functionality is configured and
# running
if (!check_network($printer, $in)) {return 0};
$in->set_help('setupLPD') if $::isInstall;
my ($uri, $remotehost, $remotequeue);
my $queue = $printer->{OLD_QUEUE};
if (($printer->{configured}{$queue}) &&
($printer->{currentqueue}{'connect'} =~ m/^lpd:/)) {
$uri = $printer->{currentqueue}{'connect'};
$uri =~ m!^\s*lpd://([^/]+)/([^/]+)/?\s*$!;
$remotehost = $1;
$remotequeue = $2;
} else {
$remotehost = "";
$remotequeue = "lp";
}
return if !$in->ask_from(_("Remote lpd Printer Options"),
_("To use a remote lpd printer, you need to supply the hostname of the printer server and the printer name on that server."), [
{ label => _("Remote host name"), val => \$remotehost },
{ label => _("Remote printer name"), val => \$remotequeue } ],
complete => sub {
unless ($remotehost ne "") {
$in->ask_warn('', _("Remote host name missing!"));
return (1,0);
}
unless ($remotequeue ne "") {
$in->ask_warn('', _("Remote printer name missing!"));
return (1,1);
}
return 0;
}
);
#- make the DeviceURI from user input.
$printer->{currentqueue}{'connect'} =
"lpd://$remotehost/$remotequeue";
#- LPD does not support filtered queues to a remote LPD server by itself
#- It needs an additional program as "rlpr"
if (($printer->{SPOOLER} eq 'lpd') && (!$::testing) &&
(!printer::files_exist((qw(/usr/bin/rlpr))))) {
$in->do_pkgs->install('rlpr');
}
1;
}
sub setup_smb {
my ($printer, $in) = @_;
# Check whether the network functionality is configured and
# running
if (!check_network($printer, $in)) {return 0};
$in->set_help('setupSMB') if $::isInstall;
my ($uri, $smbuser, $smbpassword, $workgroup, $smbserver, $smbserverip, $smbshare);
my $queue = $printer->{OLD_QUEUE};
if (($printer->{configured}{$queue}) &&
($printer->{currentqueue}{'connect'} =~ m/^smb:/)) {
$uri = $printer->{currentqueue}{'connect'};
$uri =~ m!^\s*smb://(.*)$!;
my $parameters = $1;
# Get the user's login and password from the URI
if ($parameters =~ m!([^@]*)@([^@]+)!) {
my $login = $1;
$parameters = $2;
if ($login =~ m!([^:]*):([^:]*)!) {
$smbuser = $1;
$smbpassword = $2;
} else {
$smbuser = $login;
$smbpassword = "";
}
} else {
$smbuser = "";
$smbpassword = "";
}
# Get the workgroup, server, and share name
if ($parameters =~ m!([^/]*)/([^/]+)/([^/]+)$!) {
$workgroup = $1;
$smbserver = $2;
$smbshare = $3;
} elsif ($parameters =~ m!([^/]+)/([^/]+)$!) {
$workgroup = "";
$smbserver = $1;
$smbshare = $2;
} else {
die "The \"smb://\" URI must at least contain the server name and the share name!\n";
}
if (network::is_ip($smbserver)) {
$smbserverip = $smbserver;
$smbserver = "";
}
}
return if !$in->ask_from(_("SMB (Windows 9x/NT) Printer Options"),
_("To print to a SMB printer, you need to provide the SMB host name (Note! It may be different from its TCP/IP hostname!) and possibly the IP address of the print server, as well as the share name for the printer you wish to access and any applicable user name, password, and workgroup information."), [
{ label => _("SMB server host"), val => \$smbserver },
{ label => _("SMB server IP"), val => \$smbserverip },
{ label => _("Share name"), val => \$smbshare },
{ label => _("User name"), val => \$smbuser },
{ label => _("Password"), val => \$smbpassword, hidden => 1 },
{ label => _("Workgroup"), val => \$workgroup }, ],
complete => sub {
unless ((network::is_ip($smbserverip)) || ($smbserverip eq "")) {
$in->ask_warn('', _("IP address should be in format 1.2.3.4"));
return (1,1);
}
unless (($smbserver ne "") || ($smbserverip ne "")) {
$in->ask_warn('', _("Either the server name or the server's IP must be given!"));
return (1,0);
}
unless ($smbshare ne "") {
$in->ask_warn('', _("Samba share name missing!"));
return (1,2);
}
return 0;
}
);
#- make the DeviceURI from, try to probe for available variable to
#- build a suitable URI.
$printer->{currentqueue}{'connect'} =
join '', ("smb://", ($smbuser && ($smbuser .
($smbpassword && ":$smbpassword") . "@")), ($workgroup && ("$workgroup/")),
($smbserver || $smbserverip), "/$smbshare");
if ((!$::testing) &&
(!printer::files_exist((qw(/usr/bin/smbclient))))) {
$in->do_pkgs->install('samba-client');
}
$printer->{SPOOLER} eq 'cups' and printer::restart_queue($printer);
1;
}
sub setup_ncp {
my ($printer, $in) = @_;
# Check whether the network functionality is configured and
# running
if (!check_network($printer, $in)) {return 0};
$in->set_help('setupNCP') if $::isInstall;
my ($uri, $ncpuser, $ncppassword, $ncpserver, $ncpqueue);
my $queue = $printer->{OLD_QUEUE};
if (($printer->{configured}{$queue}) &&
($printer->{currentqueue}{'connect'} =~ m/^ncp:/)) {
$uri = $printer->{currentqueue}{'connect'};
my $parameters = $uri =~ m!^\s*ncp://(.*)$!;
# Get the user's login and password from the URI
if ($parameters =~ m!([^@]*)@([^@]+)!) {
my $login = $1;
$parameters = $2;
if ($login =~ m!([^:]*):([^:]*)!) {
$ncpuser = $1;
$ncppassword = $2;
} else {
$ncpuser = $login;
$ncppassword = "";
}
} else {
$ncpuser = "";
$ncppassword = "";
}
# Get the workgroup, server, and share name
if ($parameters =~ m!([^/]+)/([^/]+)$!) {
$ncpserver = $1;
$ncpqueue = $2;
} else {
die "The \"ncp://\" URI must at least contain the server name and the share name!\n";
}
}
return if !$in->ask_from(_("NetWare Printer Options"),
_("To print on a NetWare printer, you need to provide the NetWare print server name (Note! it may be different from its TCP/IP hostname!) as well as the print queue name for the printer you wish to access and any applicable user name and password."), [
{ label => _("Printer Server"), val => \$ncpserver },
{ label => _("Print Queue Name"), val => \$ncpqueue },
{ label => _("User name"), val => \$ncpuser },
{ label => _("Password"), val => \$ncppassword, hidden => 1 } ],
complete => sub {
unless ($ncpserver ne "") {
$in->ask_warn('', _("NCP server name missing!"));
return (1,0);
}
unless ($ncpqueue ne "") {
$in->ask_warn('', _("NCP queue name missing!"));
return (1,1);
}
return 0;
}
);
# Generate the Foomatic URI
$printer->{currentqueue}{'connect'} =
join '', ("ncp://", ($ncpuser && ($ncpuser .
($ncppassword && ":$ncppassword") . "@")),
"$ncpserver/$ncpqueue");
if ((!$::testing) &&
(!printer::files_exist((qw(/usr/bin/nprint))))) {
$in->do_pkgs->install('ncpfs');
}
1;
}
sub setup_socket {
my ($printer, $in) = @_;
# Check whether the network functionality is configured and
# running
if (!check_network($printer, $in)) {return 0};
$in->set_help('setupSocket') if $::isInstall;
my ($hostname, $port, $uri, $remotehost,$remoteport);
my $queue = $printer->{OLD_QUEUE};
if (($printer->{configured}{$queue}) &&
($printer->{currentqueue}{'connect'} =~ m/^socket:/)) {
$uri = $printer->{currentqueue}{'connect'};
($remotehost, $remoteport) = $uri =~ m!^\s*socket://([^/:]+):([0-9]+)/?\s*$!;
} else {
$remotehost = "";
$remoteport = "9100";
}
return if !$in->ask_from(_("TCP/Socket Printer Options"),
_("To print to a TCP or socket printer, you need to provide the host name of the printer and optionally the port number. On HP JetDirect servers the port number is usually 9100, on other servers it can vary. See the manual of your hardware."), [
{ label => _("Printer host name"), val => \$remotehost },
{ label => _("Port"), val => \$remoteport } ],
complete => sub {
unless ($remotehost ne "") {
$in->ask_warn('', _("Printer host name missing!"));
return (1,0);
}
unless ($remoteport =~ /^[0-9]+$/) {
$in->ask_warn('', _("The port number should be an integer!"));
return (1,1);
}
return 0;
}
);
#- make the Foomatic URI
$printer->{currentqueue}{'connect'} =
join '', ("socket://$remotehost", $remoteport ? (":$remoteport") : ());
#- LPD and LPRng need netcat ('nc') to access to socket printers
if ((($printer->{SPOOLER} eq 'lpd') || ($printer->{SPOOLER} eq 'lprng'))&&
(!$::testing) &&
(!printer::files_exist((qw(/usr/bin/nc))))) {
$in->do_pkgs->install('nc');
}
1;
}
sub setup_uri {
my ($printer, $in) = @_;
$in->set_help('setupURI') if $::isInstall;
return if !$in->ask_from(_("Printer Device URI"),
_("You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers."), [
{ label => _("Printer Device URI"),
val => \$printer->{currentqueue}{'connect'},
list => [ $printer->{currentqueue}{'connect'},
"file:/",
"http://",
"ipp://",
"lpd://",
"smb://",
"ncp://",
"socket://",
"postpipe:\"\"",
], not_edit => 0 }, ],
complete => sub {
unless ($printer->{currentqueue}{'connect'} =~ /[^:]+:.+/) {
$in->ask_warn('', _("A valid URI must be entered!"));
return (1,0);
}
return 0;
}
);
# Non-local printer, check network and abort if no network available
if (($printer->{currentqueue}{'connect'} !~ m!^file:/!) &&
(!check_network($printer, $in))) {return 0};
# If the chosen protocol needs additional software, install it.
# LPD does not support filtered queues to a remote LPD server by itself
# It needs an additional program as "rlpr"
if (($printer->{currentqueue}{'connect'} =~ /^lpd:/) &&
($printer->{SPOOLER} eq 'lpd') && (!$::testing) &&
(!printer::files_exist((qw(/usr/bin/rlpr))))) {
$in->do_pkgs->install('rlpr');
}
if (($printer->{currentqueue}{'connect'} =~ /^smb:/) &&
(!$::testing) &&
(!printer::files_exist((qw(/usr/bin/smbclient))))) {
$in->do_pkgs->install('samba-client');
}
if (($printer->{currentqueue}{'connect'} =~ /^ncp:/) &&
(!$::testing) &&
(!printer::files_exist((qw(/usr/bin/nprint))))) {
$in->do_pkgs->install('ncpfs');
}
#- LPD and LPRng need netcat ('nc') to access to socket printers
if (($printer->{currentqueue}{'connect'} =~ /^socket:/) &&
(($printer->{SPOOLER} eq 'lpd') || ($printer->{SPOOLER} eq 'lprng')) &&
(!$::testing) &&
(!printer::files_exist((qw(/usr/bin/nc))))) {
$in->do_pkgs->install('nc');
}
1;
}
sub setup_postpipe {
my ($printer, $in) = @_;
$in->set_help('setupPostpipe') if $::isInstall;
my $uri;
my $commandline;
my $queue = $printer->{OLD_QUEUE};
if (($printer->{configured}{$queue}) &&
($printer->{currentqueue}{'connect'} =~ m/^postpipe:/)) {
$uri = $printer->{currentqueue}{'connect'};
$uri =~ m!^\s*postpipe:\"(.*)\"$!;
$commandline = $1;
} else {
$commandline = "";
}
return if !$in->ask_from(_("Pipe into command"),
_("Here you can specify any arbitrary command line into which the job should be piped instead of being sent directly to a printer."), [
{ label => _("Command line"),
val => \$commandline }, ],
complete => sub {
unless ($commandline ne "") {
$in->ask_warn('', _("A command line must be entered!"));
return (1,0);
}
return 0;
}
);
#- make the Foomatic URI
$printer->{currentqueue}{'connect'} = "postpipe:$commandline";
1;
}
sub choose_printer_name {
my ($printer, $in) = @_;
# Name, description, location
$in->set_help('setupPrinterName') if $::isInstall;
my $default = $printer->{currentqueue}{'queue'};
$in->ask_from_
(
{ title => _("Enter Printer Name and Comments"),
#cancel => !$printer->{configured}{$queue} ? '' : _("Remove queue"),
callbacks => { complete => sub {
unless ($printer->{currentqueue}{'queue'} =~ /^\w+$/) {
$in->ask_warn('', _("Name of printer should contain only letters, numbers and the underscore"));
return (1,0);
}
if (($printer->{configured}{$printer->{currentqueue}{'queue'}})
&& ($printer->{currentqueue}{'queue'} ne $default) &&
(!$in->ask_yesorno('', _("The printer \"%s\" already exists,\ndo you really want to overwrite its configuration?",
$printer->{currentqueue}{'queue'}),
0))) {
return (1,0); # Let the user correct the name
}
return 0;
},
},
messages =>
_("Every printer needs a name (for example \"printer\"). The Description and Location fields do not need to be filled in. They are comments for the users.") },
[ { label => _("Name of printer"), val => \$printer->{currentqueue}{'queue'} },
{ label => _("Description"), val => \$printer->{currentqueue}{'desc'} },
{ label => _("Location"), val => \$printer->{currentqueue}{'loc'} },
]) or return 0;
$printer->{QUEUE} = $printer->{currentqueue}{'queue'};
1;
}
sub get_db_entry {
my ($printer, $in) = @_;
#- Read the printer driver database if necessary
if ((keys %printer::thedb) == 0) {
my $w = $in->wait_message('', _("Reading printer database ..."));
printer::read_printer_db($printer->{SPOOLER});
}
my $w = $in->wait_message('', _("Preparing printer database ..."));
my $queue = $printer->{OLD_QUEUE};
if ($printer->{configured}{$queue}) {
# The queue was already configured
if ($printer->{configured}{$queue}{'queuedata'}{'foomatic'}) {
# The queue was configured with Foomatic
my $driverstr;
if ($printer->{configured}{$queue}{'queuedata'}{'driver'} eq "Postscript") {
$driverstr = "PostScript";
} else {
$driverstr = "GhostScript + $printer->{configured}{$queue}{'queuedata'}{'driver'}";
}
my $make = uc($printer->{configured}{$queue}{'queuedata'}{'make'});
my $model = $printer->{configured}{$queue}{'queuedata'}{'model'};
if ($::expert) {
$printer->{DBENTRY} = "$make|$model|$driverstr";
# database key contains the "(recommended)" for the
# recommended driver, so add it if necessary
if (!($printer::thedb{$printer->{DBENTRY}}{printer})) {
$printer->{DBENTRY} .= " (recommended)";
}
} else {
$printer->{DBENTRY} = "$make|$model";
}
$printer->{OLD_CHOICE} = $printer->{DBENTRY};
} elsif (($printer->{SPOOLER} eq "cups") && ($::expert) &&
($printer->{configured}{$queue}{'queuedata'}{'ppd'})) {
# Do we have a native CUPS driver or a PostScript PPD file?
$printer->{DBENTRY} = printer::get_descr_from_ppd($printer) || $printer->{DBENTRY};
$printer->{OLD_CHOICE} = $printer->{DBENTRY};
} else {
# Point the list cursor at least to manufacturer and model of the
# printer
$printer->{DBENTRY} = "";
my $make = uc($printer->{configured}{$queue}{'queuedata'}{'make'});
my $model = $printer->{configured}{$queue}{'queuedata'}{'model'};
my $key;
for $key (keys %printer::thedb) {
if ((($::expert) && ($key =~ /^$make\|$model\|.*\(recommended\)$/)) ||
((!$::expert) && ($key =~ /^$make\|$model$/))) {
$printer->{DBENTRY} = $key;
}
}
if ($printer->{DBENTRY} eq "") {
# Exact match of make and model did not work, try to clean
# up the model name
$model =~ s/PS//;
$model =~ s/PostScript//;
$model =~ s/Series//;
for $key (keys %printer::thedb) {
if ((($::expert) && ($key =~ /^$make\|$model\|.*\(recommended\)$/)) ||
((!$::expert) && ($key =~ /^$make\|$model$/))) {
$printer->{DBENTRY} = $key;
}
}
}
if (($printer->{DBENTRY} eq "") && ($make ne "")) {
# Exact match with cleaned-up model did not work, try a best match
my $matchstr = "$make|$model";
$printer->{DBENTRY} = bestMatchSentence($matchstr, keys %printer::thedb);
# If the manufacturer was not guessed correctly, discard the
# guess.
$printer->{DBENTRY} =~ /^([^\|]+)\|/;
my $guessedmake = lc($1);
if (($matchstr !~ /$guessedmake/i) &&
(($guessedmake ne "hp") ||
($matchstr !~ /Hewlett[\s-]+Packard/i)))
{$printer->{DBENTRY} = ""};
}
# Set the OLD_CHOICE to a non-existing value
$printer->{OLD_CHOICE} = "XXX";
}
} else {
if (($::expert) && ($printer->{DBENTRY} !~ /(recommended)/)) {
my ($make, $model) = $printer->{DBENTRY} =~ /^([^\|]+)\|([^\|]+)\|/;
for my $key (keys %printer::thedb) {
if ($key =~ /^$make\|$model\|.*\(recommended\)$/) {
$printer->{DBENTRY} = $key;
}
}
}
$printer->{OLD_CHOICE} = $printer->{DBENTRY};
}
}
sub choose_model {
my ($printer, $in) = @_;
$in->set_help('chooseModel') if $::isInstall;
#- Read the printer driver database if necessary
if ((keys %printer::thedb) == 0) {
my $w = $in->wait_message('', _("Reading printer database ..."));
printer::read_printer_db($printer->{SPOOLER});
}
if (!$printer::thedb{$printer->{DBENTRY}}) {
$printer->{DBENTRY} = _("Raw printer (No driver)");
}
# Choose the printer/driver from the list
return ($printer->{DBENTRY} = $in->ask_from_treelist(_("Printer model selection"),
_("Which printer model do you have?") .
_("
Please check whether Printerdrake did the auto-detection of your printer model correctly. Search the correct model in the list when the cursor is standing on a wrong model or on \"Raw printer\"."), '|',
[ keys %printer::thedb ], $printer->{DBENTRY}));
}
sub get_printer_info {
my ($printer, $in) = @_;
#- Read the printer driver database if necessary
#if ((keys %printer::thedb) == 0) {
# my $w = $in->wait_message('', _("Reading printer database ..."));
# printer::read_printer_db($printer->{SPOOLER});
#}
my $queue = $printer->{OLD_QUEUE};
my $oldchoice = $printer->{OLD_CHOICE};
my $newdriver = 0;
if ((!$printer->{configured}{$queue}) || # New queue or
(($oldchoice) && ($printer->{DBENTRY}) && # make/model/driver changed
(($oldchoice ne $printer->{DBENTRY}) ||
($printer->{currentqueue}{'driver'} ne
$printer::thedb{$printer->{DBENTRY}}{'driver'})))) {
delete($printer->{currentqueue}{printer});
delete($printer->{currentqueue}{ppd});
$printer->{currentqueue}{foomatic} = 0;
# Read info from printer database
foreach (qw(printer ppd driver make model)) { #- copy some parameter, shorter that way...
$printer->{currentqueue}{$_} = $printer::thedb{$printer->{DBENTRY}}{$_};
}
$newdriver = 1;
}
# Use the "printer" and not the "foomatic" field to identify a Foomatic
# queue because in a new queue "foomatic" is not set yet.
if (($printer->{currentqueue}{'printer'}) || # We have a Foomatic queue
($printer->{currentqueue}{'ppd'})) { # We have a CUPS+PPD queue
if ($printer->{currentqueue}{'printer'}) { # Foomatic queue?
# In case of a new queue "foomatic" was not set yet
$printer->{currentqueue}{'foomatic'} = 1;
# Now get the options for this printer/driver combo
if (($printer->{configured}{$queue}) && ($printer->{configured}{$queue}{'queuedata'}{'foomatic'})) {
# The queue was already configured with Foomatic ...
if (!$newdriver) {
# ... and the user didn't change the printer/driver
$printer->{ARGS} = $printer->{configured}{$queue}{'args'};
} else {
# ... and the user has chosen another printer/driver
$printer->{ARGS} = printer::read_foomatic_options($printer);
}
} else {
# The queue was not configured with Foomatic before
# Set some special options
$printer->{SPECIAL_OPTIONS} = '';
# Default page size depending on the country/language
# (US/Canada -> Letter, Others -> A4)
my $pagesize;
if ($printer->{PAPERSIZE}) {
$printer->{SPECIAL_OPTIONS} .=
" -o PageSize=$printer->{PAPERSIZE}";
} elsif (($in->{lang}) ||
($pagesize = $ENV{'LC_PAPER'}) ||
($pagesize = $ENV{'LANG'}) ||
($pagesize = $ENV{'LANGUAGE'}) ||
($pagesize = $ENV{'LC_ALL'})) {
if (($pagesize eq 'en') || ($pagesize eq 'en_US')) {
$pagesize = "Letter";
} else {
$pagesize = "A4";
}
$printer->{SPECIAL_OPTIONS} .=
" -o PageSize=$pagesize";
}
# oki4w driver -> OKI winprinter which needs the
# oki4daemon to work
if ($printer->{currentqueue}{'driver'} eq 'oki4w') {
if ($printer->{currentqueue}{'connect'} ne
'file:/dev/lp0') {
$in->ask_warn(_("OKI winprinter configuration"),
_("You are configuring an OKI laser winprinter. These printers\nuse a very special communication protocol and therefore they work only when connected to the first parallel port. When your printer is connected to another port or to a print server box please connect the printer to the first parallel port before you print a test page. Otherwise the printer will not work. Your connection type setting will be ignored by the driver."));
}
$printer->{currentqueue}{'connect'} = 'file:/dev/null';
# Start the oki4daemon
printer::start_service_on_boot('oki4daemon');
printer::start_service('oki4daemon');
# Set permissions
if ($printer->{SPOOLER} eq 'cups') {
printer::set_permissions('/dev/oki4drv', '660', 'lp',
'sys');
} elsif ($printer->{SPOOLER} eq 'pdq') {
printer::set_permissions('/dev/oki4drv', '666');
} else {
printer::set_permissions('/dev/oki4drv', '660', 'lp',
'lp');
}
} elsif ($printer->{currentqueue}{'driver'} eq 'lexmarkinkjet') {
# Set "Port" option
if ($printer->{currentqueue}{'connect'} eq
'file:/dev/lp0') {
$printer->{SPECIAL_OPTIONS} .=
" -o Port=ParPort1";
} elsif ($printer->{currentqueue}{'connect'} eq
'file:/dev/lp1') {
$printer->{SPECIAL_OPTIONS} .=
" -o Port=ParPort2";
} elsif ($printer->{currentqueue}{'connect'} eq
'file:/dev/lp2') {
$printer->{SPECIAL_OPTIONS} .=
" -o Port=ParPort3";
} elsif ($printer->{currentqueue}{'connect'} eq
'file:/dev/usb/lp0') {
$printer->{SPECIAL_OPTIONS} .=
" -o Port=USB1";
} elsif ($printer->{currentqueue}{'connect'} eq
'file:/dev/usb/lp1') {
$printer->{SPECIAL_OPTIONS} .=
" -o Port=USB2";
} elsif ($printer->{currentqueue}{'connect'} eq
'file:/dev/usb/lp2') {
$printer->{SPECIAL_OPTIONS} .=
" -o Port=USB3";
} else {
$in->ask_warn(_("Lexmark inkjet configuration"),
_("The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to."));
return 0;
}
# Set device permissions
$printer->{currentqueue}{'connect'} =~ /^\s*file:(\S*)\s*$/;
if ($printer->{SPOOLER} eq 'cups') {
printer::set_permissions($1, '660', 'lp', 'sys');
} elsif ($printer->{SPOOLER} eq 'pdq') {
printer::set_permissions($1, '666');
} else {
printer::set_permissions($1, '660', 'lp', 'lp');
}
# This is needed to have the device not blocked by the
# spooler backend.
$printer->{currentqueue}{'connect'} = 'file:/dev/null';
#install packages
my $drivertype = $printer->{currentqueue}{'model'};
if ($drivertype eq 'Z22') {$drivertype = 'Z32';}
if ($drivertype eq 'Z23') {$drivertype = 'Z33';}
$drivertype = lc($drivertype);
if (!printer::files_exist("/usr/local/lexmark/$drivertype/$drivertype")) {
eval { $in->do_pkgs->install("lexmark-drivers-$drivertype") };
}
if (!printer::files_exist("/usr/local/lexmark/$drivertype/$drivertype")) {
# Driver installation failed, probably we do not have
# the commercial CDs
$in->ask_warn(_("Lexmark inkjet configuration"),
_("To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Go to the US site and click on the \"Drivers\" button. Then choose your model and afterwards \"Linux\" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and adjust the head alignment settings with this program."));
}
}
$printer->{ARGS} = printer::read_foomatic_options($printer);
delete($printer->{SPECIAL_OPTIONS});
}
} elsif ($printer->{currentqueue}{'ppd'}) { # CUPS+PPD queue?
# If we had a Foomatic queue before, unmark the flag and initialize
# the "printer" and "driver" fields
$printer->{currentqueue}{'foomatic'} = 0;
$printer->{currentqueue}{'printer'} = undef;
$printer->{currentqueue}{'driver'} = "CUPS/PPD";
# Now get the options from this PPD file
if ($printer->{configured}{$queue}) {
# The queue was already configured
if ((!$printer->{DBENTRY}) || (!$oldchoice) ||
($printer->{DBENTRY} eq $oldchoice)) {
# ... and the user didn't change the printer/driver
$printer->{ARGS} = printer::read_cups_options($queue);
} else {
# ... and the user has chosen another printer/driver
$printer->{ARGS} = printer::read_cups_options("/usr/share/cups/model/$printer->{currentqueue}{ppd}");
}
} else {
# The queue was not configured before
$printer->{ARGS} = printer::read_cups_options("/usr/share/cups/model/$printer->{currentqueue}{ppd}");
}
}
}
1;
}
sub setup_options {
my ($printer, $in) = @_;
my @simple_options =
("PageSize", # Media properties
"MediaType",
"Form",
"InputSlot", # Trays
"Tray",
"OutBin",
"OutputBin",
"FaceUp",
"FaceDown",
"Collate",
"Manual",
"ManualFeed",
"Manualfeed",
"ManualFeeder",
"Feeder",
"Duplex", # Double-sided printing
"Binding",
"Tumble",
"DoubleSided",
"Resolution", # Resolution/Quality
"GSResolution",
"JCLResolution",
"Quality",
"PrintQuality",
"PrintoutQuality",
"QualityType",
"ImageType",
"InkType", # Colour/Gray/BW, 4-ink/6-ink
"Mode",
"OutputMode",
"OutputType",
"ColorMode",
"PrintingMode",
"Monochrome",
"BlackOnly",
"Grayscale",
"GrayScale",
"Colour",
"Color",
"Gamma", # Lighter/Darker
"GammaCorrection",
"GammaGeneral",
"MasterGamma",
"StpGamma",
"EconoMode", # Ink/Toner saving
"Economode",
"TonerSaving",
"JCLEconomode",
"HPNup", # Other useful options
"InstalledMemory", # Laser printer hardware config
"Option1",
"Option2",
"Option3",
"Option4",
"Option5",
"Option6",
"Option7",
"Option8",
"Option9",
"Option10",
"Option11",
"Option12",
"Option13",
"Option14",
"Option15",
"Option16",
"Option17",
"Option18",
"Option19",
"Option20",
"Option21",
"Option22",
"Option23",
"Option24",
"Option25",
"Option26",
"Option27",
"Option28",
"Option29",
"Option30"
);
$in->set_help('setupOptions') if $::isInstall;
if (($printer->{currentqueue}{'printer'}) || # We have a Foomatic queue
($printer->{currentqueue}{'ppd'})) { # We have a CUPS+PPD queue
# Set up the widgets for the option dialog
my @widgets;
my @userinputs;
my @choicelists;
my @shortchoicelists;
my $i;
for ($i = 0; $i <= $#{$printer->{ARGS}}; $i++) {
my $optshortdefault = $printer->{ARGS}[$i]{'default'};
if ($printer->{ARGS}[$i]{'type'} eq 'enum') {
# enumerated option
push(@choicelists, []);
push(@shortchoicelists, []);
my $choice;
for $choice (@{$printer->{ARGS}[$i]{'vals'}}) {
push(@{$choicelists[$i]}, $choice->{'comment'});
push(@{$shortchoicelists[$i]}, $choice->{'value'});
if ($choice->{'value'} eq $optshortdefault) {
push(@userinputs, $choice->{'comment'});
}
}
push(@widgets,
{ label => $printer->{ARGS}[$i]{'comment'},
val => \$userinputs[$i],
not_edit => 1,
list => \@{$choicelists[$i]},
advanced => !member($printer->{ARGS}[$i]{'name'},
@simple_options) });
} elsif ($printer->{ARGS}[$i]{'type'} eq 'bool') {
# boolean option
push(@choicelists, [$printer->{ARGS}[$i]{'name'},
$printer->{ARGS}[$i]{'name_false'}]);
push(@shortchoicelists, []);
push(@userinputs, $choicelists[$i][1-$optshortdefault]);
push(@widgets,
{ label => $printer->{ARGS}[$i]{'comment'},
val => \$userinputs[$i],
not_edit => 1,
list => \@{$choicelists[$i]},
advanced => !member($printer->{ARGS}[$i]{'name'},
@simple_options) });
} else {
# numerical option
push(@choicelists, []);
push(@shortchoicelists, []);
push(@userinputs, $optshortdefault);
push(@widgets,
{ label => $printer->{ARGS}[$i]{'comment'} .
" ($printer->{ARGS}[$i]{'min'} ... " .
"$printer->{ARGS}[$i]{'max'})",
#type => 'range',
#min => $printer->{ARGS}[$i]{'min'},
#max => $printer->{ARGS}[$i]{'max'},
val => \$userinputs[$i],
advanced => !member($printer->{ARGS}[$i]{'name'},
@simple_options) });
}
}
# Show the options dialog. The call-back function does a
# range check of the numerical options.
my $windowtitle = "$printer->{currentqueue}{'make'} $printer->{currentqueue}{'model'}";
if ($::expert) {
my $driver = undef;
if ($driver = $printer->{currentqueue}{driver}) {
if ($printer->{currentqueue}{foomatic}) {
if ($driver eq 'Postscript') {
$driver = "PostScript";
} else {
$driver = "GhostScript + $driver";
}
} elsif ($printer->{currentqueue}{ppd}) {
if ($printer->{DBENTRY}) {
$printer->{DBENTRY} =~ /^[^\|]*\|[^\|]*\|(.*)$/;
$driver = $1;
} else {
$driver = printer::get_descr_from_ppd($printer);
if ($driver =~ /^[^\|]*\|[^\|]*$/) { # No driver info
$driver = "CUPS/PPD";
} else {
$driver =~ /^[^\|]*\|[^\|]*\|(.*)$/;
$driver = $1;
}
}
}
}
if ($driver) {
$windowtitle .= ", $driver";
}
}
return 0 if !$in->ask_from
($windowtitle,
_("Printer default settings
You should make sure that the page size and the ink type/printing mode (if available) and also the hardware configuration of laser printers (memory, duplex unit, extra trays) are set correctly. Note that with a very high printout quality/resolution printing can get substantially slower."),
\@widgets,
complete => sub {
my $i;
for ($i = 0; $i <= $#{$printer->{ARGS}}; $i++) {
if (($printer->{ARGS}[$i]{'type'} eq 'int') || ($printer->{ARGS}[$i]{'type'} eq 'float')) {
unless (($printer->{ARGS}[$i]{'type'} ne 'int') || ($userinputs[$i] =~ /^[\-\+]?[0-9]+$/)) {
$in->ask_warn('', _("Option %s must be an integer number!", $printer->{ARGS}[$i]{'comment'}));
return (1, $i);
}
unless (($printer->{ARGS}[$i]{'type'} ne 'float') || ($userinputs[$i] =~ /^[\-\+]?[0-9\.]+$/)) {
$in->ask_warn('', _("Option %s must be a number!", $printer->{ARGS}[$i]{'comment'}));
return (1, $i);
}
unless (($userinputs[$i] >= $printer->{ARGS}[$i]{'min'}) &&
($userinputs[$i] <= $printer->{ARGS}[$i]{'max'})) {
$in->ask_warn('', _("Option %s out of range!", $printer->{ARGS}[$i]{'comment'}));
return (1, $i);
}
}
}
return (0);
} );
# Read out the user's choices
@{$printer->{currentqueue}{options}} = ();
for ($i = 0; $i <= $#{$printer->{ARGS}}; $i++) {
push(@{$printer->{currentqueue}{options}}, "-o");
if ($printer->{ARGS}[$i]{'type'} eq 'enum') {
# enumerated option
my $j;
for ($j = 0; $j <= $#{$choicelists[$i]}; $j++) {
if ($choicelists[$i][$j] eq $userinputs[$i]) {
push(@{$printer->{currentqueue}{options}}, $printer->{ARGS}[$i]{'name'} . "=". $shortchoicelists[$i][$j]);
}
}
} elsif ($printer->{ARGS}[$i]{'type'} eq 'bool') {
# boolean option
push(@{$printer->{currentqueue}{options}}, $printer->{ARGS}[$i]{'name'} . "=".
(($choicelists[$i][0] eq $userinputs[$i]) ? "1" : "0"));
} else {
# numerical option
push(@{$printer->{currentqueue}{options}}, $printer->{ARGS}[$i]{'name'} . "=" . $userinputs[$i]);
}
}
}
1;
}
sub setasdefault {
my ($printer, $in) = @_;
$in->set_help('setupAsDefault') if $::isInstall;
if (($printer->{DEFAULT} eq '') || # We have no default printer,
# so set the current one as default
($in->ask_yesorno('', _("Do you want to set this printer (\"%s\")\nas the default printer?", $printer->{QUEUE}), 1))) { # Ask the user
$printer->{DEFAULT} = $printer->{QUEUE};
printer::set_default_printer($printer);
}
}
sub print_testpages {
my ($printer, $in, $upNetwork) = @_;
$in->set_help('printTestPages') if $::isInstall;
# print test pages
my $standard = 1;
my $altletter = 0;
my $alta4 = 0;
my $photo = 0;
my $ascii = 0;
if ($in->ask_from_
({ title => _("Test pages"),
messages => _("Please select the test pages you want to print.
Note: the photo test page can take a rather long time to get printed and on laser printers with too low memory it can even not come out. In most cases it is enough to print the standard test page."),
cancel => ((!$printer->{NEW}) ?
_("Cancel") : _("No test pages")),
ok => _("Print")},
[
{ text => _("Standard test page"), type => 'bool',
val => \$standard },
($::expert ?
{ text => _("Alternative test page (Letter)"), type => 'bool',
val => \$altletter } : ()),
($::expert ?
{ text => _("Alternative test page (A4)"), type => 'bool',
val => \$alta4 } : ()),
{ text => _("Photo test page"), type => 'bool', val => \$photo }
#{ text => _("Plain text test page"), type => 'bool',
# val => \$ascii }
])) {
my @lpq_output;
{
my $w = $in->wait_message('', _("Printing test page(s)..."));
$upNetwork and do { &$upNetwork(); undef $upNetwork; sleep(1) };
my $stdtestpage = "/usr/share/printer-testpages/testprint.ps";
my $altlttestpage = "/usr/share/printer-testpages/testpage.ps";
my $alta4testpage = "/usr/share/printer-testpages/testpage-a4.ps";
my $phototestpage = "/usr/share/printer-testpages/photo-testpage.jpg";
my $asciitestpage = "/usr/share/printer-testpages/testpage.asc";
my @testpages;
# Install the filter to convert the photo test page to PS
if (($photo) && (!$::testing) &&
(!printer::files_exist((qw(/usr/bin/convert))))) {
$in->do_pkgs->install('ImageMagick');
}
# set up list of pages to print
$standard && push (@testpages, $stdtestpage);
$altletter && push (@testpages, $altlttestpage);
$alta4 && push (@testpages, $alta4testpage);
$photo && push (@testpages, $phototestpage);
$ascii && push (@testpages, $asciitestpage);
# print the stuff
@lpq_output = printer::print_pages($printer, @testpages);
}
my $dialogtext;
if (@lpq_output) {
$dialogtext = _("Test page(s) have been sent to the printer.
It may take some time before the printer starts.
Printing status:\n%s\n\n", @lpq_output);
} else {
$dialogtext = _("Test page(s) have been sent to the printer.
It may take some time before the printer starts.\n");
}
if ($printer->{NEW} == 0) {
$in->ask_warn('',$dialogtext);
return 1;
} else {
$in->ask_yesorno('',$dialogtext . _("Did it work properly?"), 1)
and return 1;
}
} else {
return 1;
}
return 0;
}
sub printer_help {
my ($printer, $in) = @_;
my $spooler = $printer->{SPOOLER};
my $queue = $printer->{QUEUE};
my $default = $printer->{DEFAULT};
my $raw = 0;
my $cupsremote = 0;
if ($printer->{configured}{$queue}) {
if (($printer->{configured}{$queue}{'queuedata'}{'model'} eq
_("Unknown model")) ||
($printer->{configured}{$queue}{'queuedata'}{'model'} eq
_("Raw printer"))) {
$raw = 1;
}
} else {
$cupsremote = 1;
}
#my $foomatic = $printer->{configured}{$queue}{queuedata}{foomatic};
#my $ppd = $printer->{configured}{$queue}{queuedata}{ppd};
my $dialogtext;
if ($spooler eq "cups") {
$dialogtext =
_("To print a file from the command line (terminal window) you can either use the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or \"qtcups <file>\". The graphical tools allow you to choose the printer and to modify the option settings easily.
", ($queue ne $default ? "lpr -P $queue" : "lpr")) .
_("These commands you can also use in the \"Printing command\" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.
") .
(!$raw ?
_("
The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". ", "lpr", ($queue ne $default ? "lpr -P $queue -o option=setting -o switch" : "lpr -o option=setting -o switch")) .
(!$cupsremote ?
_("To get a list of the options available for the current printer read either the list shown below or click on the \"Print option list\" button.
") . printer::lphelp_output($printer) :
_("Here is a list of the available options for the current printer:
") . printer::lphelp_output($printer)) : "");
} elsif ($spooler eq "lprng") {
$dialogtext =
_("To print a file from the command line (terminal window) use the command \"%s <file>\".
", ($queue ne $default ? "lpr -P $queue" : "lpr")) .
_("This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
") .
(!$raw ?
_("
The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". ", "lpr", ($queue ne $default ? "lpr -P $queue -Z option=setting -Z switch" : "lpr -Z option=setting -Z switch")) .
_("To get a list of the options available for the current printer click on the \"Print option list\" button.
") : "");
} elsif ($spooler eq "lpd") {
$dialogtext =
_("To print a file from the command line (terminal window) use the command \"%s <file>\".
", ($queue ne $default ? "lpr -P $queue" : "lpr")) .
_("This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
") .
(!$raw ?
_("
The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". ", "lpr", ($queue ne $default ? "lpr -P $queue -o option=setting -o switch" : "lpr -o option=setting -o switch")) .
_("To get a list of the options available for the current printer click on the \"Print option list\" button.
") : "");
} elsif ($spooler eq "pdq") {
$dialogtext =
_("To print a file from the command line (terminal window) use the command \"%s <file>\" or \"%s <file>\".
", ($queue ne $default ? "pdq -P $queue" : "pdq"), ($queue ne $default ? "lpr -P $queue" : "lpr")) .
_("This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
") .
_("You can also use the graphical interface \"xpdq\" for setting options and handling printing jobs.
If you are using KDE as desktop environment you have a \"panic button\", an icon on the desktop, labeled with \"STOP Printer!\", which stops all print jobs immediately when you click it. This is for example useful for paper jams.
") .
(!$raw ?
_("
The \"%s\" and \"%s\" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\".
", "pdq", "lpr", ($queue ne $default ? "pdq -P $queue -aoption=setting -oswitch" : "pdq -aoption=setting -oswitch")) .
_("To get a list of the options available for the current printer read either the list shown below or click on the \"Print option list\" button.
") . printer::pdqhelp_output($printer) : "");
}
if (!$raw && !$cupsremote) {
my $choice;
while ($choice ne _("Close")) {
$choice = $in->ask_from_list_
(_("Printing on the printer \"%s\"", $queue),
$dialogtext,
[ _("Print option list"), _("Close") ],
_("Close"));
if ($choice ne _("Close")) {
my $w = $in->wait_message('', _("Printing test page(s)..."));
printer::print_optionlist($printer);
}
}
} else {
$in->ask_warn(_("Printing on the printer \"%s\"", $queue),
$dialogtext);
}
}
sub copy_queues_from {
my ($printer, $in, $oldspooler) = @_;
$in->set_help('copyQueues') if $::isInstall;
my $newspooler = $printer->{SPOOLER};
my @oldqueues;
my @queueentries;
my @queuesselected;
my $newspoolerstr;
my $oldspoolerstr;
my $noninteractive = 0;
{
my $w = $in->wait_message('', _("Reading printer data ..."));
@oldqueues = printer::get_copiable_queues($oldspooler, $newspooler);
@oldqueues = sort(@oldqueues);
$newspoolerstr = $printer::shortspooler_inv{$newspooler};
$oldspoolerstr = $printer::shortspooler_inv{$oldspooler};
for (@oldqueues) {
push (@queuesselected, 1);
push (@queueentries, { text => $_, type => 'bool',
val => \$queuesselected[$#queuesselected] });
}
# LPRng and LPD use the same config files, therefore one sees the
# queues of LPD when one uses LPRng and vice versa, but these queues
# do not work. So automatically transfer all queues when switching
# between LPD and LPRng.
if (($oldspooler =~ /^lp/) && ($newspooler =~ /^lp/)) {
$noninteractive = 1;
}
}
if ($noninteractive ||
$in->ask_from_
({ title => _("Transfer printer configuration"),
messages => _("You can copy the printer configuration which you have done for the spooler %s to %s, your current spooler. All the configuration data (printer name, description, location, connection type, and default option settings) is overtaken, but jobs will not be transferred.
Not all queues can be transferred due to the following reasons:
", $oldspoolerstr, $newspoolerstr) .
($newspooler eq "cups" ? _("CUPS does not support printers on Novell servers or printers sending the data into a free-formed command.
") :
($newspooler eq "pdq" ? _("PDQ only supports local printers, remote LPD printers, and Socket/TCP printers.
") :
_("LPD and LPRng do not support IPP printers.
"))) .
_("In addition, queues not created with this program or \"foomatic-configure\" cannot be transferred.") .
($oldspooler eq "cups" ? _("
Also printers configured with the PPD files provided by their manufacturers or with native CUPS drivers cannot be transferred.") : ()) . _("
Mark the printers which you want to transfer and click
\"Transfer\"."),
cancel => _("Do not transfer printers"),
ok => _("Transfer")
},
\@queueentries
)) {
my $queuecopied = 0;
for (@oldqueues) {
if (shift(@queuesselected)) {
my $oldqueue = $_;
my $newqueue = $_;
if ((!$printer->{configured}{$newqueue}) ||
($noninteractive) ||
($in->ask_from_
({ title => _("Transfer printer configuration"),
messages => _("A printer named \"%s\" already exists under %s.
Click \"Transfer\" to overwrite it.
You can also type a new name or skip this printer.",
$newqueue, $newspoolerstr),
ok => _("Transfer"),
cancel => _("Skip"),
callbacks => { complete => sub {
unless ($newqueue =~ /^\w+$/) {
$in->ask_warn('', _("Name of printer should contain only letters, numbers and the underscore"));
return (1,0);
}
if (($printer->{configured}{$newqueue})
&& ($newqueue ne $oldqueue) &&
(!$in->ask_yesorno('', _("The printer \"%s\" already exists,\ndo you really want to overwrite its configuration?",
$newqueue),
0))) {
return (1,0); # Let the user correct the name
}
return 0;
}}
},
[{label => _("New printer name"),val => \$newqueue}]))) {
{
my $w = $in->wait_message('',
_("Transferring %s ...", $oldqueue));
printer::copy_foomatic_queue($printer, $oldqueue,
$oldspooler, $newqueue) and
$queuecopied = 1;
}
if ($oldqueue eq $printer->{DEFAULT}) {
# Make the former default printer the new default
# printer if the user does not reject
if (($noninteractive) ||
($in->ask_yesorno
(_("Transfer printer configuration"),
_("You have transferred your former default printer (\"%s\"), Should it be also the default printer under the new printing system %s?", $oldqueue, $newspoolerstr), 1))) {
$printer->{DEFAULT} = $newqueue;
printer::set_default_printer($printer);
}
}
}
}
}
if ($queuecopied) {
my $w = $in->wait_message('', _("Refreshing printer data ..."));
printer::read_configured_queues($printer);
}
}
}
sub start_network {
my $in = $_[0];
my $w = $in->wait_message(_("Configuration of a remote printer"),
_("Starting network ..."));
return printer::start_service("network");
}
sub check_network {
# This routine is called whenever the user tries to configure a remote
# printer. It checks the state of the network functionality to assure
# that the network is up and running so that the remote printer is
# reachable.
my ($printer, $in) = @_;
$in->set_help('checkNetwork') if $::isInstall;
# First check: Does /etc/sysconfig/network-scripts/draknet_conf exist
# (otherwise the network is not configured yet and draknet has to be
# started)
if (!printer::files_exist("/etc/sysconfig/network-scripts/draknet_conf")) {
my $go_on = 0;
while (!$go_on) {
my $choice = _("Configure the network now");
if ($in->ask_from(_("Network functionality not configured"),
_("You are going to configure a remote printer. This needs working network access, but your network is not configured yet. If you go on without network configuration, you will not be able to use the printer which you are configuring now. How do you want to proceed?"),
[ { val => \$choice, type => 'list',
list => [ _("Configure the network now"),
_("Go on without configuring the network") ]} ] )) {
if ($choice eq _("Configure the network now")){
if ($::isInstall) {
require network::netconnect;
network::netconnect::main
($in->{prefix}, $in->{netcnx} ||= {},
$in->{netc}, $in->{mouse}, $in,
$in->{intf}, 0,
$in->{lang} eq "fr_FR" &&
$in->{keyboard} eq "fr", 0);
} else {
system("/usr/sbin/draknet");
}
if (printer::files_exist("/etc/sysconfig/network-scripts/draknet_conf")) {
$go_on = 1;
}
} else {
return 1;
}
} else {
return 0;
}
}
}
# Second check: Is the network running?
if (printer::network_running()) {return 1;}
# The network is configured now, start it.
if (!start_network($in)) {
$in->ask_warn(_("Configuration of a remote printer"),
($::isInstall ?
_("The network configuration done during the installation cannot be started now. Please check whether the network gets accessable after booting your system and correct the configuration using the Mandrake Control Center, section \"Network & Internet\"/\"Connection\", and afterwards set up the printer, also using the Mandrake Control Center, section \"Hardware\"/\"Printer\"") :
_("The network access was not running and could not be started. Please check your configuration and your hardware. Then try to configure your remote printer again.")));
return 0;
}
# Give a SIGHUP to the daemon and in case of CUPS do also the
# automatic configuration of broadcasting/access permissions
# The daemon is not really restarted but only SIGHUPped to not
# interrupt print jobs.
my $w = $in->wait_message(_("Configuration of a remote printer"),
_("Restarting printing system ..."));
return printer::SIGHUP_daemon($printer->{SPOOLER});
}
sub security_check {
# Check the security mode and when in "high" or "paranoid" mode ask the
# user whether he really wants to configure printing.
my ($printer, $in, $spooler) = @_;
$in->set_help('securityCheck') if $::isInstall;
# Get security level
my $security = undef;
if ($::isInstall) {
$security = $in->{'security'};
} else {
$security = printer::get_security_level();
}
# Exit silently if the spooler is PDQ
if ($spooler eq "pdq") {return 1;}
# Exit silently in medium or lower security levels
if ((!$security) || ($security < 4)) {return 1;}
# Exit silently if the current spooler is already activated for the current
# security level
if (printer::spooler_in_security_level($spooler, $security)) {return 1;}
# Tell user in which security mode he is and ask him whether he really
# wants to activate the spooler in the given security mode. Stop the
# operation of installing the spooler if he disagrees.
my $securitystr = ($security == 4 ? _("high") : _("paranoid"));
if ($in->ask_yesorno(_("Installing a printing system in the %s security level", $securitystr),
_("You are about to install the printing system %s on a system running in the %s security level.
This printing system runs a daemon (background process) which waits for print jobs and handles them. This daemon is also accessable by remote machines through the network and so it is a possible point for attacks. Therefore only a few selected daemons are started by default in this security level.
Do you really want to configure printing on this machine?",
$printer::shortspooler_inv{$spooler},
$securitystr))) {
printer::add_spooler_to_security_level($spooler, $security);
my $service;
if (($spooler eq "lpr") || ($spooler eq "lprng")) {
$service = "lpd";
} else {
$service = $spooler;
}
printer::start_service_on_boot($service);
return 1;
} else {
return 0;
}
}
sub start_spooler_on_boot {
# Checks whether the spooler will be started at boot time and if not,
# ask the user whether he wants to start the spooler at boot time.
my ($printer, $in, $service) = @_;
$in->set_help('startSpoolerOnBoot') if $::isInstall;
if (!printer::service_starts_on_boot($service)) {
if ($in->ask_yesorno(_("Starting the printing system at boot time"),
_("The printing system (%s) will not be started automatically when the machine is booted.
It is possible that the automatic starting was turned off by changing to a higher security level, because the printing system is a potential point for attacks.
Do you want to have the automatic starting of the printing system turned on again?",
$printer::shortspooler_inv{$printer->{SPOOLER}}))) {
printer::start_service_on_boot($service);
}
}
1;
}
sub install_spooler {
# installs the default spooler and start its daemon
my ($printer, $in) = @_;
if (!$::testing) {
# If the user refuses to install the spooler in high or paranoid
# security level, exit.
if (!security_check($printer, $in, $printer->{SPOOLER})) {
return 0;
}
if ($printer->{SPOOLER} eq "cups") {
{
my $w = $in->wait_message('', _("Checking installed software..."));
if ((!$::testing) &&
(!printer::files_exist((qw(/usr/lib/cups/cgi-bin/printers.cgi
/sbin/ifconfig
/usr/bin/xpp
/usr/bin/qtcups),
(printer::files_exist("/usr/bin/kwin")?
"/usr/bin/kups" : ()),
($::expert ?
"/usr/share/cups/model/postscript.ppd.gz" : ())
)))) {
$in->do_pkgs->install(('cups', 'net-tools', 'xpp', 'qtcups',
if_($in->do_pkgs->is_installed('kdebase'), 'kups'),
($::expert ? 'cups-drivers' : ())));
}
# Start daemon
printer::start_service("cups");
# Set the CUPS tools as defaults for "lpr", "lpq", "lprm", ...
printer::set_alternative("lpr","/usr/bin/lpr-cups");
printer::set_alternative("lpq","/usr/bin/lpq-cups");
printer::set_alternative("lprm","/usr/bin/lprm-cups");
printer::set_alternative("lp","/usr/bin/lp-cups");
printer::set_alternative("cancel","/usr/bin/cancel-cups");
printer::set_alternative("lpstat","/usr/bin/lpstat-cups");
printer::set_alternative("lpc","/usr/sbin/lpc-cups");
# Remove PDQ panic buttons from the user's KDE Desktops
printer::pdq_panic_button("remove");
}
# Should it be started at boot time?
start_spooler_on_boot($printer, $in, "cups");
} elsif ($printer->{SPOOLER} eq "lpd") {
{
my $w = $in->wait_message('', _("Checking installed software..."));
# "lpr" conflicts with "LPRng", remove "LPRng"
if ((!$::testing) &&
(printer::files_exist((qw(/usr/lib/filters/lpf))))) {
my $w = $in->wait_message('', _("Removing LPRng..."));
$in->do_pkgs->remove_nodeps('LPRng');
}
if ((!$::testing) &&
(!printer::files_exist((qw(/usr/sbin/lpf
/usr/sbin/lpd
/sbin/ifconfig))))) {
$in->do_pkgs->install(('lpr', 'net-tools'));
}
# Start daemon
printer::restart_service("lpd");
# Set the LPD tools as defaults for "lpr", "lpq", "lprm", ...
printer::set_alternative("lpr","/usr/bin/lpr-lpd");
printer::set_alternative("lpq","/usr/bin/lpq-lpd");
printer::set_alternative("lprm","/usr/bin/lprm-lpd");
printer::set_alternative("lpc","/usr/sbin/lpc-lpd");
# Remove PDQ panic buttons from the user's KDE Desktops
printer::pdq_panic_button("remove");
}
# Should it be started at boot time?
start_spooler_on_boot($printer, $in, "lpd");
} elsif ($printer->{SPOOLER} eq "lprng") {
{
my $w = $in->wait_message('', _("Checking installed software..."));
# "LPRng" conflicts with "lpr", remove "lpr"
if ((!$::testing) &&
(printer::files_exist((qw(/usr/sbin/lpf))))) {
my $w = $in->wait_message('', _("Removing LPD..."));
$in->do_pkgs->remove_nodeps('lpr');
}
if ((!$::testing) &&
(!printer::files_exist((qw(/usr/lib/filters/lpf
/usr/sbin/lpd
/sbin/ifconfig))))) {
$in->do_pkgs->install('LPRng', 'net-tools');
}
# Start daemon
printer::restart_service("lpd");
# Set the LPRng tools as defaults for "lpr", "lpq", "lprm", ...
printer::set_alternative("lpr","/usr/bin/lpr-lpd");
printer::set_alternative("lpq","/usr/bin/lpq-lpd");
printer::set_alternative("lprm","/usr/bin/lprm-lpd");
printer::set_alternative("lp","/usr/bin/lp-lpd");
printer::set_alternative("cancel","/usr/bin/cancel-lpd");
printer::set_alternative("lpstat","/usr/bin/lpstat-lpd");
printer::set_alternative("lpc","/usr/sbin/lpc-lpd");
# Remove PDQ panic buttons from the user's KDE Desktops
printer::pdq_panic_button("remove");
}
# Should it be started at boot time?
start_spooler_on_boot($printer, $in, "lpd");
} elsif ($printer->{SPOOLER} eq "pdq") {
{
my $w = $in->wait_message('', _("Checking installed software..."));
if ((!$::testing) &&
(!printer::files_exist((qw(/usr/bin/pdq
/usr/X11R6/bin/xpdq))))) {
$in->do_pkgs->install('pdq');
}
# PDQ has no daemon, so nothing needs to be started
# Set the PDQ tools as defaults for "lpr", "lpq", "lprm", ...
printer::set_alternative("lpr","/usr/bin/lpr-pdq");
printer::set_alternative("lpq","/usr/bin/lpq-foomatic");
printer::set_alternative("lprm","/usr/bin/lprm-foomatic");
# Add PDQ panic buttons to the user's KDE Desktops
printer::pdq_panic_button("add");
}
}
# Give a SIGHUP to the devfsd daemon to correct the permissions
# for the /dev/... files according to the spooler
printer::SIGHUP_daemon("devfs");
}
1;
}
sub setup_default_spooler {
my ($printer, $in) = @_;
$in->set_help('setupDefaultSpooler') if $::isInstall;
$printer->{SPOOLER} ||= 'cups';
my $oldspooler = $printer->{SPOOLER};
my $str_spooler =
$in->ask_from_list_(_("Select Printer Spooler"),
_("Which printing system (spooler) do you want to use?"),
[ printer::spooler() ],
$printer::spooler_inv{$printer->{SPOOLER}},
) or return;
$printer->{SPOOLER} = $printer::spooler{$str_spooler};
# Install the spooler if not done yet
if (!install_spooler($printer, $in)) {
$printer->{SPOOLER} = $oldspooler;
return;
}
if ($printer->{SPOOLER} ne $oldspooler) {
# Get the queues of this spooler
{
my $w = $in->wait_message('', _("Reading printer data ..."));
printer::read_configured_queues($printer);
}
# Copy queues from former spooler
copy_queues_from($printer, $in, $oldspooler);
# Re-read the printer database (CUPS has additional drivers, PDQ
# has no raw queue)
%printer::thedb = ();
#my $w = $in->wait_message('', _("Reading printer database ..."));
#printer::read_printer_db($printer->{SPOOLER});
}
# Save spooler choice
printer::set_default_spooler($printer);
return $printer->{SPOOLER};
}
sub configure_queue {
my ($printer, $in) = @_;
my $w = $in->wait_message('', _("Configuring printer \"%s\" ...",
$printer->{currentqueue}{queue}));
$printer->{complete} = 1;
printer::configure_queue($printer);
$printer->{complete} = 0;
}
#- Program entry point for configuration of the printing system.
sub main {
my ($printer, $in, $ask_multiple_printer, $upNetwork) = @_;
# Default printer name, we do not use "lp" so that one can switch the
# default printer under LPD without needing to rename another printer.
# Under LPD the alias "lp" will be given to the default printer.
my $defaultprname = _("Printer");
# printerdrake does not work without foomatic, and for more convenience
# we install some more stuff
{
my $w = $in->wait_message('', _("Checking installed software..."));
if ((!$::testing) &&
(!printer::files_exist((qw(/usr/bin/foomatic-configure
/usr/lib/perl5/site_perl/5.6.1/Foomatic/DB.pm
/usr/bin/escputil
/usr/share/printer-testpages/testprint.ps
),
(printer::files_exist("/usr/bin/gimp") ?
"/usr/lib/gimp/1.2/plug-ins/print" : ())
)))) {
$in->do_pkgs->install('foomatic','printer-utils','printer-testpages',
if_($in->do_pkgs->is_installed('gimp'), 'gimpprint'));
}
# only experts should be asked for the spooler
!$::expert and $printer->{SPOOLER} ||= 'cups';
}
# If we have chosen a spooler, install it and mark it as default spooler
if (($printer->{SPOOLER}) && ($printer->{SPOOLER} ne '')) {
if (!install_spooler($printer, $in)) {return;}
printer::set_default_spooler($printer);
}
# Control variables for the main loop
my ($menuchoice, $cursorpos, $queue, $continue, $newqueue, $editqueue, $expertswitch, $menushown) = ('', '::', $defaultprname, 1, 0, 0, 0, 0);
# Cursor position in queue modification window
my $modify = _("Printer options");
while ($continue) {
$newqueue = 0;
# When the queue list is not shown, cancelling the printer type
# dialog should leave the program
$continue = 0;
# Get the default printer
if (defined($printer->{SPOOLER}) && ($printer->{SPOOLER} ne '') &&
((!defined($printer->{DEFAULT})) || ($printer->{DEFAULT} eq ''))) {
my $w = $in->wait_message('', _("Preparing PrinterDrake ..."));
$printer->{DEFAULT} = printer::get_default_printer($printer);
if ($printer->{DEFAULT}) {
# If a CUPS system has only remote printers and no default
# printer defined, it defines the first printer whose
# broadcast signal appeared after the start of the CUPS
# daemon, so on every start another printer gets the default
# printer. To avoid this, make sure that the default printer
# is defined.
printer::set_default_printer($printer);
} else {
$printer->{DEFAULT} = '';
}
}
if ($editqueue) {
# The user was either in the printer modification dialog and did
# not close it or he had set up a new queue and said that the test
# page didn't come out correctly, so let the user edit the queue.
$newqueue = 0;
$continue = 1;
$editqueue = 0;
} else {
# Reset modification window cursor when one leaves the window
$modify = _("Printer options");
if (!$ask_multiple_printer &&
%{$printer->{configured} || {}} == ()) {
$in->set_help('doYouWantToPrint') if $::isInstall;
$newqueue = 1;
$menuchoice = $printer->{want} ||
$in->ask_yesorno(_("Printer"),
_("Would you like to configure printing?"),
0) ? "\@addprinter" : "\@quit";
if ($menuchoice ne "\@quit") {
$printer->{SPOOLER} ||=
setup_default_spooler ($printer, $in) ||
return;
}
} else {
# Ask for a spooler when none is defined
$printer->{SPOOLER} ||= setup_default_spooler ($printer, $in) || return;
# This entry and the check for this entry have to use
# the same translation to work properly
my $spoolerentry = _("Printing system: ");
# Show a queue list window when there is at least one queue,
# when we are in expert mode, or when we are not in the
# installation.
unless ((%{$printer->{configured} || {}} == ()) &&
(!$::expert) && ($::isInstall)) {
$in->set_help('mainMenu') if $::isInstall;
# Cancelling the printer type dialog should leed to this
# dialog
$continue = 1;
# This is for the "Recommended" installation. When one has
# no printer queue printerdrake starts directly adding
# a printer and in the end it asks whether one wants to
# install another printer. If the user says "Yes", he
# arrives in the main menu of printerdrake. From now
# on the question is not asked any more but the menu
# is shown directly after having done an operation.
$menushown = 1;
# Initialize the cursor position
if (($cursorpos eq "::") &&
($printer->{DEFAULT}) &&
($printer->{DEFAULT} ne "")) {
if ($printer->{configured}{$printer->{DEFAULT}}) {
$cursorpos =
$printer->{configured}{$printer->{DEFAULT}}{'queuedata'}{'menuentry'} . _(" (Default)");
} elsif ($printer->{SPOOLER} eq "cups") {
($cursorpos) =
grep { $_ =~ /!$printer->{DEFAULT}:[^!]*$/ }
printer::get_cups_remote_queues($printer);
}
}
# Generate the list of available printers
my @printerlist =
( (sort((map {$printer->{configured}{$_}{'queuedata'}{'menuentry'}
. ($_ eq $printer->{DEFAULT} ?
_(" (Default)") : ())}
keys(%{$printer->{configured}
|| {}})),
($printer->{SPOOLER} eq "cups" ?
printer::get_cups_remote_queues($printer)
: ())))
);
my $noprinters = ($#printerlist < 0);
# Position the cursor where it were before (in case
# a button was pressed).
$menuchoice = $cursorpos;
# Show the main dialog
$in->ask_from_(
{title => _("Printerdrake"),
messages =>
($noprinters ? "" :
_("The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it.")),
cancel => (""),
ok => (""),
},
# List the queues
[ ($noprinters ? () :
{ val => \$menuchoice, format => \&translate,
sort => 0, separator => "!",tree_expanded => 1,
quit_if_double_click => 1,allow_empty_list =>1,
list => \@printerlist }),
{ clicked_may_quit =>
sub {
# Save the cursor position
$cursorpos = $menuchoice;
$menuchoice = "\@addprinter";
1;
},
val => _("Add a new printer") },
( $printer->{SPOOLER} eq "cups" ?
{ clicked_may_quit =>
sub {
# Save the cursor position
$cursorpos = $menuchoice;
$menuchoice = "\@refresh";
1;
},
val => _("Refresh printer list (to display all available remote CUPS printers)") } : ()),
( $::expert ?
{ clicked_may_quit =>
sub {
# Save the cursor position
$cursorpos = $menuchoice;
$menuchoice = "\@spooler";
1;
},
val => _("Configure printing system") } :
()),
( !$::isInstall ?
{ clicked_may_quit =>
sub { $menuchoice = "\@usermode"; 1; },
val => ($::expert ? _("Normal Mode") :
_("Expert Mode")) } : ()),
{ clicked_may_quit =>
sub { $menuchoice = "\@quit"; 1; },
val => _("Quit") },
]
);
# Toggle expert mode and standard mode
if ($menuchoice eq "\@usermode") {
$::expert = !$::expert;
# Read printer database for the new user mode
%printer::thedb = ();
#my $w = $in->wait_message('', _("Reading printer database ..."));
#printer::read_printer_db($printer->{SPOOLER});
# Re-read printer queues to switch the tree
# structure between expert/normal mode.
my $w = $in->wait_message('', _("Reading printer data ..."));
printer::read_configured_queues($printer);
$cursorpos = "::";
next;
}
} else {
#- as there are no printer already configured, Add one
#- automatically.
$menuchoice = "\@addprinter";
}
# Refresh printer list
if ($menuchoice eq "\@refresh") {
next;
}
# Determine a default name for a new printer queue
if ($menuchoice eq "\@addprinter") {
$newqueue = 1;
my %queues;
@queues{map { split '\|', $_ } keys %{$printer->{configured}}} = ();
my $i = ''; while ($i < 150) { last unless exists $queues{"$defaultprname$i"}; ++$i; }
$queue = "$defaultprname$i";
}
# Function to switch to another spooler chosen
if ($menuchoice eq "\@spooler") {
$printer->{SPOOLER} = setup_default_spooler ($printer, $in) || $printer->{SPOOLER};
next;
}
# Rip the queue name out of the chosen menu entry
if ($menuchoice =~ /!([^\s!:]+):[^!]*$/) {
$queue = $1;
# Save the cursor position
$cursorpos = $menuchoice;
}
}
# Save the default spooler
printer::set_default_spooler($printer);
#- Close printerdrake
$menuchoice eq "\@quit" and last;
}
if ($newqueue) {
$printer->{NEW} = 1;
#- Set default values for a new queue
$printer::printer_type_inv{$printer->{TYPE}} or
$printer->{TYPE} = printer::default_printer_type($printer);
$printer->{currentqueue} = { queue => $queue,
foomatic => 0,
desc => "",
loc => "",
make => "",
model => "",
printer => "",
driver => "",
connect => "",
spooler => $printer->{SPOOLER},
};
#- Set OLD_QUEUE field so that the subroutines for the
#- configuration work correctly.
$printer->{OLD_QUEUE} = $printer->{QUEUE} = $queue;
my $window;
#- Do all the configuration steps for a new queue
if (0 && (!$::expert) && (!$::isEmbedded) && (!$::isInstall) &&
($in->isa('interactive_gtk'))) {
$window = 'interactive'->vnew(0, 'printer');
# Enter wizard mode
$::Wizard_pix_up = "wiz_printerdrake.png";
$::Wizard_title = _("Add a new printer");
$::isWizard = 1;
# Wizard welcome screen
$::Wizard_no_previous = 1;
undef $::Wizard_finished;
wizard_welcome($window);
undef $::Wizard_no_previous;
} else {
$window = $in;
}
$printer->{TYPE} = "LOCAL";
!$::expert or choose_printer_type($printer, $in) or next;
if ($printer->{TYPE} eq 'CUPS') {
setup_remote_cups_server($printer, $in);
$continue = ($::expert || !$::isInstall || $menushown ||
$in->ask_yesorno('',_("Do you want to configure another printer?")));
next;
}
#- Cancelling one of the following dialogs should restart
#- printerdrake
$continue = 1;
setup_printer_connection($printer, $window) or next;
!$::expert or choose_printer_name($printer, $in) or next;
get_db_entry($printer, $window);
!$::expert or choose_model($printer, $in) or next;
get_printer_info($printer, $window) or next;
!$::expert or setup_options($printer, $in) or next;
configure_queue($printer, $window);
!$::expert or setasdefault($printer, $in);
$cursorpos =
$printer->{configured}{$printer->{QUEUE}}{'queuedata'}{'menuentry'} .
($printer->{QUEUE} eq $printer->{DEFAULT} ?
_(" (Default)") : ());
if (print_testpages($printer, $window, $printer->{TYPE} !~ /LOCAL/ && $upNetwork)) {
if ($::isWizard) {
# Leave wizard mode with congratulations screen
$::Wizard_no_previous = 1;
$::Wizard_finished = 1;
wizard_congratulations($window);
undef $::isWizard;
}
$continue = ($::expert || !$::isInstall || $menushown ||
$in->ask_yesorno('',_("Do you want to configure another printer?")));
} else {
if ($::isWizard) {
# Leave wizard mode without congratulations screen
$::Wizard_finished = 1;
undef $::isWizard;
}
$editqueue = 1;
$queue = $printer->{QUEUE};
}
} else {
$printer->{NEW} = 0;
# Modify a queue, ask which part should be modified
$in->set_help('modifyPrinterMenu') if $::isInstall;
# Get some info to display
my $infoline;
if ($printer->{configured}{$queue}) {
# Here we must regenerate the menu entry, because the
# parameters can be changed.
printer::make_menuentry($printer,$queue);
$printer->{configured}{$queue}{'queuedata'}{menuentry} =~
/!([^!]+)$/;
$infoline = $1 .
($queue eq $printer->{DEFAULT} ? _(" (Default)") : ()) .
($printer->{configured}{$queue}{'queuedata'}{'desc'} ?
", Descr.: $printer->{configured}{$queue}{'queuedata'}{'desc'}" : ()) .
($printer->{configured}{$queue}{'queuedata'}{'loc'} ?
", Loc.: $printer->{configured}{$queue}{'queuedata'}{'loc'}" : ()) .
($::expert ?
", Driver: $printer->{configured}{$queue}{'queuedata'}{'driver'}" : ());
} else {
# The parameters of a remote CUPS queue cannot be changed,
# so we can simply take the menu entry.
$cursorpos =~ /!([^!]+)$/;
$infoline = $1;
}
if ($in->ask_from_
({ title => _("Modify printer configuration"),
messages =>
_("Printer %s
What do you want to modify on this printer?",
$infoline),
cancel => _("Close"),
ok => _("Do it!")
},
[ { val => \$modify, format => \&translate,
list => [ ($printer->{configured}{$queue} ?
(_("Printer connection type"),
_("Printer name, description, location"),
($::expert ?
_("Printer manufacturer, model, driver") :
_("Printer manufacturer, model")),
(($printer->{configured}{$queue}{'queuedata'}{'make'} ne
"") &&
(($printer->{configured}{$queue}{'queuedata'}{'model'} ne
_("Unknown model")) &&
($printer->{configured}{$queue}{'queuedata'}{'model'} ne
_("Raw printer"))) ?
_("Printer options") : ())) : ()),
(($queue ne $printer->{DEFAULT}) ?
_("Set this printer as the default") : ()),
_("Print test pages"),
_("Know how to print with this printer"),
($printer->{configured}{$queue} ?
_("Remove printer") : ()) ] } ] ) ) {
# Stay in the queue edit window until the user clicks "Close"
# or deletes the queue
$editqueue = 1;
#- Copy the queue data and work on the copy
$printer->{currentqueue} = {};
my $driver;
if ($printer->{configured}{$queue}) {
printer::copy_printer_params($printer->{configured}{$queue}{'queuedata'}, $printer->{currentqueue});
#- Keep in mind the printer driver which was used, so it
#- can be determined whether the driver is only
#- available in expert and so for setting the options
#- for the driver in recommended mode a special
#- treatment has to be applied.
$driver = $printer->{currentqueue}{driver};
}
#- keep in mind old name of queue (in case of changing)
$printer->{OLD_QUEUE} = $printer->{QUEUE} = $queue;
#- Reset some variables
$printer->{OLD_CHOICE} = undef;
$printer->{DBENTRY} = undef;
#- Which printer type did we have before (check beginning of
#- URI)
my $type;
if ($printer->{configured}{$queue}) {
for $type (qw(file lpd socket smb ncp postpipe)) {
if ($printer->{currentqueue}{'connect'}
=~ /^$type:/) {
$printer->{TYPE} =
($type eq 'file' ? 'LOCAL' : uc($type));
last;
}
}
}
# Do the chosen task
if ($modify eq _("Printer connection type")) {
choose_printer_type($printer, $in) &&
setup_printer_connection($printer, $in) &&
configure_queue($printer, $in);
} elsif ($modify eq _("Printer name, description, location")) {
choose_printer_name($printer, $in) &&
configure_queue($printer, $in);
# Delete old queue when it was renamed
if (lc($printer->{QUEUE}) ne lc($printer->{OLD_QUEUE})) {
my $w = $in->wait_message('', _("Removing old printer \"%s\" ...", $printer->{OLD_QUEUE}));
printer::remove_queue($printer, $printer->{OLD_QUEUE});
# If the default printer was renamed, correct the
# the default printer setting of the spooler
if ($queue eq $printer->{DEFAULT}) {
$printer->{DEFAULT} = $printer->{QUEUE};
printer::set_default_printer($printer);
}
$queue = $printer->{QUEUE};
}
} elsif (($modify eq _("Printer manufacturer, model, driver")) ||
($modify eq _("Printer manufacturer, model"))) {
get_db_entry($printer, $in);
choose_model($printer, $in) &&
get_printer_info($printer, $in) &&
setup_options($printer, $in) &&
configure_queue($printer, $in);
} elsif ($modify eq _("Printer options")) {
get_printer_info($printer, $in) &&
setup_options($printer, $in) &&
configure_queue($printer, $in);
} elsif ($modify eq _("Set this printer as the default")) {
$printer->{DEFAULT} = $queue;
printer::set_default_printer($printer);
$in->ask_warn(_("Default printer"),
_("The printer \"%s\" is set as the default printer now.", $queue));
} elsif ($modify eq _("Print test pages")) {
print_testpages($printer, $in, $upNetwork);
} elsif ($modify eq _("Know how to print with this printer")) {
printer_help($printer, $in);
} elsif ($modify eq _("Remove printer")) {
if ($in->ask_yesorno('',
_("Do you really want to remove the printer \"%s\"?", $queue), 1)) {
{
my $w = $in->wait_message('', _("Removing printer \"%s\" ...", $queue));
if (printer::remove_queue($printer, $queue)) {
$editqueue = 0;
# Define a new default printer if we have
# removed the default one
if ($queue eq $printer->{DEFAULT}) {
my @k = sort(keys(%{$printer->{configured}}));
if (@k) {
$printer->{DEFAULT} = $k[0];
printer::set_default_printer($printer);
} else {
$printer->{DEFAULT} = "";
}
}
# Let the main menu cursor go to the default
# position
$cursorpos = "::";
}
}
}
}
# Make sure that the cursor is still at the same position
# in the main menu when one has modified something on the
# current printer
if (($printer->{QUEUE}) && ($printer->{QUEUE} ne "")) {
if ($printer->{configured}{$printer->{QUEUE}}) {
$cursorpos =
$printer->{configured}{$printer->{QUEUE}}{'queuedata'}{'menuentry'} .
($printer->{QUEUE} eq $printer->{DEFAULT} ?
_(" (Default)") : ());
} else {
my $s1 = _(" (Default)");
my $s2 = $s1;
$s2 =~ s/\(/\\\(/;
$s2 =~ s/\)/\\\)/;
if (($printer->{QUEUE} eq $printer->{DEFAULT}) &&
($cursorpos !~ /$s2/)) {
$cursorpos .= $s1;
}
}
}
} else {
$editqueue = 0;
}
$continue = ($editqueue || $::expert || !$::isInstall ||
$menushown ||
$in->ask_yesorno('',_("Do you want to configure another printer?")));
}
# Delete some variables
$printer->{OLD_QUEUE} = "";
$printer->{QUEUE} = "";
$printer->{TYPE} = "";
$printer->{str_type} = "";
$printer->{currentqueue} = {};
$printer->{DBENTRY} = "";
$printer->{ARGS} = "";
$printer->{complete} = 0;
$printer->{OLD_CHOICE} = "";
}
# Clean up the $printer data structure for auto-install log
for my $queue (keys %{$printer->{configured}}) {
for my $item (keys %{$printer->{configured}{$queue}}) {
if ($item ne "queuedata") {
delete($printer->{configured}{$queue}{$item});
}
}
if ($printer->{configured}{$queue}{'queuedata'}{'menuentry'}) {
delete($printer->{configured}{$queue}{'queuedata'}{'menuentry'});
}
}
delete($printer->{OLD_QUEUE});
delete($printer->{QUEUE});
delete($printer->{TYPE});
delete($printer->{str_type});
delete($printer->{currentqueue});
delete($printer->{DBENTRY});
delete($printer->{ARGS});
delete($printer->{complete});
delete($printer->{OLD_CHOICE});
delete($printer->{NEW});
#use Data::Dumper;
#print "###############################################################################\n", Dumper($printer);
}
|