# Turkish translation of DrakX # Copyright (C) 1999 MandrakeSof # Hakan Terzioglu , 1999 # AHMET SEZEN , 1999 # Görkem Çetin , 2000 # Nazmi Savga , 2000 # Ömer Fadıl USTA , 2001 # msgid "" msgstr "" "Project-Id-Version: DrakX 1.0\n" "POT-Creation-Date: 2001-04-17 16:58+0200\n" "PO-Revision-Date: 2000-10-28 03:04+0200\n" "Last-Translator: Ömer Fadıl USTA \n" "Language-Team: Turkish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=ISO-8859-9\n" "Content-Transfer-Encoding: 8bit\n" #: ../../Xconfigurator.pm_.c:232 msgid "Configure all heads independantly" msgstr "Tüm Kafalar tek tek ayarlanıyor" #: ../../Xconfigurator.pm_.c:233 msgid "Use Xinerama extension" msgstr "Xinerame uzantısını kullanın" #: ../../Xconfigurator.pm_.c:236 #, c-format msgid "Configure only card \"%s\" (%s)" msgstr "Sadecene \"%s\" (%s) kartını ayarla" #: ../../Xconfigurator.pm_.c:239 msgid "Multi-head configuration" msgstr "Çoklu-Kafa ayarlanıyor" #: ../../Xconfigurator.pm_.c:240 msgid "" "Your system support multiple head configuration.\n" "What do you want to do?" msgstr "" "Sisteminiz Çoklu-Kafa ayarlama desteğine sahip.\n" "Ne yapmamı istersiniz ?" #: ../../Xconfigurator.pm_.c:249 msgid "Graphic card" msgstr "Ekran kartı" #: ../../Xconfigurator.pm_.c:249 msgid "Select a graphic card" msgstr "Ekran kartınızı seçin" # #: ../../Xconfigurator.pm_.c:250 msgid "Choose a X server" msgstr "Bir X sunucusu seçin" #: ../../Xconfigurator.pm_.c:250 msgid "X server" msgstr "X sunucusu" #: ../../Xconfigurator.pm_.c:304 ../../Xconfigurator.pm_.c:311 #, c-format msgid "XFree %s" msgstr "XFree %s" #: ../../Xconfigurator.pm_.c:307 msgid "Which configuration of XFree do you want to have?" msgstr "Hangi XFree86 ayarına sahip olmak istiyorsunuz?" #: ../../Xconfigurator.pm_.c:320 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Ekran kartınız 3 boyutlu donanım hızlandırması desteğine sahip olabilir,\n" "fakat bu özellik sadece XFree %s'de geçerlidir. Kartınız 2 boyutta daha\n" "iyi destek vermekte olan XFree %s tarafından destekleniyor." #: ../../Xconfigurator.pm_.c:322 ../../Xconfigurator.pm_.c:355 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "" "Ekran kartınız XFree %s sunucusuyla çalıştırıldığında 3 boyutlu\n" "donanım hızlandırması desteğine sahip olabilir." #: ../../Xconfigurator.pm_.c:324 ../../Xconfigurator.pm_.c:357 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "XFree %s'le birlikte 3 boyutlu donanım hızlandırması" #: ../../Xconfigurator.pm_.c:332 ../../Xconfigurator.pm_.c:346 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "Ekran kartınız XFree %s sunucusuyla çalıştırıldığında 3 boyutlu\n" "donanım hızlandırması desteğine sahip olabilir, BU DENEYSEL BİR DESTEKTİR\n" "VE MAKİNANIZI KİLİTLEYEBİLİR." #: ../../Xconfigurator.pm_.c:334 ../../Xconfigurator.pm_.c:348 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "3 boyutlu donanım hızlandırması ile XFree %s" #: ../../Xconfigurator.pm_.c:343 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Ekran kartınız sadece XFree %s sunucusuyla çalıştırıldığında 3 boyutlu\n" "donanım hızlandırması desteğine sahip olabilir, BU DENEYSEL BİR DESTEKTİR\n" "VE MAKİNANIZI KİLİTLEYEBİLİR. Kartınıza XFree %s tarafından verilen 2 boyut\n" "desteği daha iyi durumdadır." #: ../../Xconfigurator.pm_.c:363 msgid "XFree configuration" msgstr "XFree ayarları" #: ../../Xconfigurator.pm_.c:396 msgid "Select the memory size of your graphic card" msgstr "Ekran kartınızın bellek boyutunu seçin" # #: ../../Xconfigurator.pm_.c:443 msgid "Choose options for server" msgstr "X sunucusu için seçenekleri belirtin" #: ../../Xconfigurator.pm_.c:460 msgid "Choose a monitor" msgstr "Monitörünüzü seçin" #: ../../Xconfigurator.pm_.c:460 msgid "Monitor" msgstr "Monitör" #: ../../Xconfigurator.pm_.c:463 msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "Buradaki iki önemli parametre dikey ve yatay tazeleme hızlarıdır.\n" "Seçiminizi yaparken monitörünüzün kapasitesinin üstünde bir seçim\n" "yapmamanız oldukça önemlidir, aksi takdirde monitör zarar görebilir.\n" "Seçerken bir ikileme düşerseniz, düşük çözünürlükte bir ayar seçin." #: ../../Xconfigurator.pm_.c:470 msgid "Horizontal refresh rate" msgstr "Yatay tazeleme hızı" #: ../../Xconfigurator.pm_.c:471 msgid "Vertical refresh rate" msgstr "Dikey tazeleme hızı" #: ../../Xconfigurator.pm_.c:508 msgid "Monitor not configured" msgstr "Monitor ayarlanmamış" #: ../../Xconfigurator.pm_.c:511 msgid "Graphic card not configured yet" msgstr "Ekran kartı henüz yapılandırılmadı" #: ../../Xconfigurator.pm_.c:514 msgid "Resolutions not chosen yet" msgstr "Çözünürlük henüz seçilmedi" #: ../../Xconfigurator.pm_.c:530 msgid "Do you want to test the configuration?" msgstr "Ayarları test etmek istiyor musunuz?" #: ../../Xconfigurator.pm_.c:534 msgid "Warning: testing this graphic card may freeze your computer" msgstr "Uyarı: Bu grafik kartıni test etmek bilgisayarınızı kilitleyebilir" #: ../../Xconfigurator.pm_.c:537 msgid "Test of the configuration" msgstr "Test ayarları" #: ../../Xconfigurator.pm_.c:576 msgid "" "\n" "try to change some parameters" msgstr "" "\n" "bazı parametreleri değiştirin" #: ../../Xconfigurator.pm_.c:576 msgid "An error has occurred:" msgstr "Bir hata oluştu:" #: ../../Xconfigurator.pm_.c:598 #, c-format msgid "Leaving in %d seconds" msgstr "%d saniye sonra çıkılıyor" #: ../../Xconfigurator.pm_.c:609 msgid "Is this the correct setting?" msgstr "Bu ayarlar doğru mu?" #: ../../Xconfigurator.pm_.c:617 msgid "An error has occurred, try to change some parameters" msgstr "Bir hata oluştu, parametreleri değiştirin" #: ../../Xconfigurator.pm_.c:663 ../../printerdrake.pm_.c:277 #: ../../services.pm_.c:125 msgid "Resolution" msgstr "Çözünürlük" #: ../../Xconfigurator.pm_.c:710 msgid "Choose the resolution and the color depth" msgstr "Çözünürlük ve renk derinliğini seçin" #: ../../Xconfigurator.pm_.c:712 #, c-format msgid "Graphic card: %s" msgstr "Ekran kartı: %s" #: ../../Xconfigurator.pm_.c:713 #, c-format msgid "XFree86 server: %s" msgstr "XFree86 sunucusu: %s" #: ../../Xconfigurator.pm_.c:729 ../../standalone/draknet_.c:280 #: ../../standalone/draknet_.c:283 msgid "Expert Mode" msgstr "Uzman kipi" #: ../../Xconfigurator.pm_.c:730 msgid "Show all" msgstr "Hepsini Göster" #: ../../Xconfigurator.pm_.c:773 msgid "Resolutions" msgstr "Çözünürlükler" #: ../../Xconfigurator.pm_.c:1299 #, c-format msgid "Keyboard layout: %s\n" msgstr "Klavye düzeni: %s\n" #: ../../Xconfigurator.pm_.c:1300 #, c-format msgid "Mouse type: %s\n" msgstr "Fare tipi: %s\n" #: ../../Xconfigurator.pm_.c:1301 #, c-format msgid "Mouse device: %s\n" msgstr "Fare aygıtı: %s\n" #: ../../Xconfigurator.pm_.c:1302 #, c-format msgid "Monitor: %s\n" msgstr "Monitör: %s\n" #: ../../Xconfigurator.pm_.c:1303 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Monitörün Yatay Taraması: %s\n" #: ../../Xconfigurator.pm_.c:1304 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Monitörün Dikey Tazelemesi: %s\n" #: ../../Xconfigurator.pm_.c:1305 #, c-format msgid "Graphic card: %s\n" msgstr "Ekran kartı: %s\n" #: ../../Xconfigurator.pm_.c:1306 #, c-format msgid "Graphic memory: %s kB\n" msgstr "Ekran kartı belleği: %s KB\n" #: ../../Xconfigurator.pm_.c:1308 #, c-format msgid "Color depth: %s\n" msgstr "Renk derinliği: %s\n" #: ../../Xconfigurator.pm_.c:1309 #, c-format msgid "Resolution: %s\n" msgstr "Çözünürlük: %s\n" #: ../../Xconfigurator.pm_.c:1311 #, c-format msgid "XFree86 server: %s\n" msgstr "XFree86 sunucusu: %s\n" #: ../../Xconfigurator.pm_.c:1312 #, c-format msgid "XFree86 driver: %s\n" msgstr "XFree86 sürücüsü: %s\n" #: ../../Xconfigurator.pm_.c:1331 msgid "Preparing X-Window configuration" msgstr "X-Window ayarlarına hazırlık yapılıyor" #: ../../Xconfigurator.pm_.c:1351 msgid "What do you want to do?" msgstr "Ne yapmak istiyorsunuz?" #: ../../Xconfigurator.pm_.c:1356 msgid "Change Monitor" msgstr "Monitörü Değiştir" #: ../../Xconfigurator.pm_.c:1357 msgid "Change Graphic card" msgstr "Ekran kartını değiştir" #: ../../Xconfigurator.pm_.c:1359 msgid "Change Server options" msgstr "Sunucu seçeneklerini değiştir" #: ../../Xconfigurator.pm_.c:1360 msgid "Change Resolution" msgstr "Çözünürlüğü değiştir" #: ../../Xconfigurator.pm_.c:1361 msgid "Show information" msgstr "Bilgileri göster" #: ../../Xconfigurator.pm_.c:1362 msgid "Test again" msgstr "Tekrar test et" #: ../../Xconfigurator.pm_.c:1363 ../../bootlook.pm_.c:220 msgid "Quit" msgstr "Çık" #: ../../Xconfigurator.pm_.c:1371 #, c-format msgid "" "Keep the changes?\n" "Current configuration is:\n" "\n" "%s" msgstr "" "Değişiklikler kaydedilsin mi?\n" "Şu andaki yapılandırma:\n" "\n" "%s" #: ../../Xconfigurator.pm_.c:1392 #, c-format msgid "Please relog into %s to activate the changes" msgstr "%s'e tekrar girin ve değişiklikleri etkin hale getirin" #: ../../Xconfigurator.pm_.c:1412 msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "Lütfen çıkın ve Ctrl-Alt-BackSpace tuşlarına basın" #: ../../Xconfigurator.pm_.c:1415 msgid "X at startup" msgstr "Açılışta X" #: ../../Xconfigurator.pm_.c:1416 msgid "" "I can set up your computer to automatically start X upon booting.\n" "Would you like X to start when you reboot?" msgstr "" "Bilgisayarınızı otomatik olarak X'le açılması için kurabilirim.\n" "Açılışta X Window ile başlamak istermisiniz?" #: ../../Xconfigurator_consts.pm_.c:6 msgid "256 colors (8 bits)" msgstr "256 renk (8 bit)" #: ../../Xconfigurator_consts.pm_.c:7 msgid "32 thousand colors (15 bits)" msgstr "32 bin renk (15 bit)" #: ../../Xconfigurator_consts.pm_.c:8 msgid "65 thousand colors (16 bits)" msgstr "65 bin renk (16 bit)" #: ../../Xconfigurator_consts.pm_.c:9 msgid "16 million colors (24 bits)" msgstr "16 milyon renk (24 bit)" #: ../../Xconfigurator_consts.pm_.c:10 msgid "4 billion colors (32 bits)" msgstr "4 milyar renk (32 bit)" #: ../../Xconfigurator_consts.pm_.c:106 msgid "256 kB" msgstr "256 kB" #: ../../Xconfigurator_consts.pm_.c:107 msgid "512 kB" msgstr "512 kB" #: ../../Xconfigurator_consts.pm_.c:108 msgid "1 MB" msgstr "1 MB" #: ../../Xconfigurator_consts.pm_.c:109 msgid "2 MB" msgstr "2 MB" #: ../../Xconfigurator_consts.pm_.c:110 msgid "4 MB" msgstr "4 MB" #: ../../Xconfigurator_consts.pm_.c:111 msgid "8 MB" msgstr "8 MB" #: ../../Xconfigurator_consts.pm_.c:112 msgid "16 MB or more" msgstr "16 MB veya daha fazla" #: ../../Xconfigurator_consts.pm_.c:120 msgid "Standard VGA, 640x480 at 60 Hz" msgstr "Standart VGA, 60 Hz'de 640x480 " #: ../../Xconfigurator_consts.pm_.c:121 msgid "Super VGA, 800x600 at 56 Hz" msgstr "Süper VGA, 56 Hz'de 800x600" #: ../../Xconfigurator_consts.pm_.c:122 msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)" msgstr "8514 Uyumlu, 87 Hz'de titreşimli 1024x768 (800x600 yok)" #: ../../Xconfigurator_consts.pm_.c:123 msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz" msgstr "Süper VGA, 87 Hz'de titreşimli 1024x768, 56 Hz'de 800x600" #: ../../Xconfigurator_consts.pm_.c:124 msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz" msgstr "Geliştirilmiş Süper VGA, 60 Hz'de 800x600, 72 Hz'de 640x480" #: ../../Xconfigurator_consts.pm_.c:125 msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz" msgstr "Titreşimsiz SVGA, 60 Hz'de 1024x768, 72 Hz'de 800x600" #: ../../Xconfigurator_consts.pm_.c:126 msgid "High Frequency SVGA, 1024x768 at 70 Hz" msgstr "Yüksek Frekanslı SVGA, 70 Hz'de 1024x768" #: ../../Xconfigurator_consts.pm_.c:127 msgid "Multi-frequency that can do 1280x1024 at 60 Hz" msgstr "Çoklu Frekans yapabilen 60 Hz'de 1280x1024" #: ../../Xconfigurator_consts.pm_.c:128 msgid "Multi-frequency that can do 1280x1024 at 74 Hz" msgstr "Çoklu Frekans yapabilen 74 Hz'de 1280x1024" #: ../../Xconfigurator_consts.pm_.c:129 msgid "Multi-frequency that can do 1280x1024 at 76 Hz" msgstr "Çoklu Frekans yapabilen 76 Hz'de 1280x1024" #: ../../Xconfigurator_consts.pm_.c:130 msgid "Monitor that can do 1600x1200 at 70 Hz" msgstr "70 Hz de 1600x1200 yapabilen Mönitor" #: ../../Xconfigurator_consts.pm_.c:131 msgid "Monitor that can do 1600x1200 at 76 Hz" msgstr "76 Hz de 1600x1200 yapabilen Monitör" #: ../../any.pm_.c:99 ../../any.pm_.c:124 msgid "First sector of boot partition" msgstr "Açılış bölümünün ilk sektörü" #: ../../any.pm_.c:99 ../../any.pm_.c:124 ../../any.pm_.c:196 msgid "First sector of drive (MBR)" msgstr "Diskin ilk sektörü (MBR)" #: ../../any.pm_.c:103 msgid "SILO Installation" msgstr "SILO Kurulumu" #: ../../any.pm_.c:104 ../../any.pm_.c:117 msgid "Where do you want to install the bootloader?" msgstr "Sistem yükleyiciyi nereye kurmak istiyorsunuz?" #: ../../any.pm_.c:116 msgid "LILO/grub Installation" msgstr "LILO/grub Kurulumu" #: ../../any.pm_.c:128 ../../any.pm_.c:142 msgid "SILO" msgstr "SILO" #: ../../any.pm_.c:130 msgid "LILO with text menu" msgstr "Metin tabanlı LILO" #: ../../any.pm_.c:131 ../../any.pm_.c:142 msgid "LILO with graphical menu" msgstr "Grafik tabanlı LILO" #: ../../any.pm_.c:134 msgid "Grub" msgstr "Grub" #: ../../any.pm_.c:138 msgid "Boot from DOS/Windows (loadlin)" msgstr "DOS/Windows dan boot et (loadlin)" #: ../../any.pm_.c:140 ../../any.pm_.c:142 msgid "Yaboot" msgstr "Yaboot" #: ../../any.pm_.c:148 ../../any.pm_.c:179 msgid "Bootloader main options" msgstr "Sistem yükleyici ana seçenekleri" #: ../../any.pm_.c:149 ../../any.pm_.c:180 msgid "Bootloader to use" msgstr "Bootloader" #: ../../any.pm_.c:151 msgid "Bootloader installation" msgstr "Açılış yükleyici kurulumu" #: ../../any.pm_.c:153 ../../any.pm_.c:182 msgid "Boot device" msgstr "Açılış aygıtı" #: ../../any.pm_.c:154 msgid "LBA (doesn't work on old BIOSes)" msgstr "LBA (eski BIOS'larda çalışmaz)" #: ../../any.pm_.c:155 msgid "Compact" msgstr "Basit" #: ../../any.pm_.c:155 msgid "compact" msgstr "basit" #: ../../any.pm_.c:156 ../../any.pm_.c:255 msgid "Video mode" msgstr "Ekran kipi" #: ../../any.pm_.c:158 msgid "Delay before booting default image" msgstr "Açılışta gecikme süresi" #: ../../any.pm_.c:160 ../../any.pm_.c:737 #: ../../install_steps_interactive.pm_.c:904 ../../netconnect.pm_.c:627 #: ../../printerdrake.pm_.c:98 ../../printerdrake.pm_.c:132 #: ../../standalone/draknet_.c:567 msgid "Password" msgstr "Parola" #: ../../any.pm_.c:161 ../../any.pm_.c:738 #: ../../install_steps_interactive.pm_.c:905 msgid "Password (again)" msgstr "Parola (tekrar)" #: ../../any.pm_.c:162 msgid "Restrict command line options" msgstr "Komut satırı seçeneklerini kısıtla" #: ../../any.pm_.c:162 msgid "restrict" msgstr "kısıtla" #: ../../any.pm_.c:164 msgid "Clean /tmp at each boot" msgstr "/tmp'yi her açılışta temizle" #: ../../any.pm_.c:165 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Toplam bellek miktarı (%d MB bulundu)" #: ../../any.pm_.c:167 msgid "Enable multi profiles" msgstr "Birden çok profile'a izin ver" #: ../../any.pm_.c:171 msgid "Give the ram size in MB" msgstr "Bellek boyutunu Mb cinsinden veriniz" #: ../../any.pm_.c:173 msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" "\"Komut satırı seçeneklerini kısıtla\" seçeneği parolasız bir işe yaramaz" #: ../../any.pm_.c:174 ../../any.pm_.c:714 #: ../../install_steps_interactive.pm_.c:899 msgid "Please try again" msgstr "Lütfen tekrar deneyin" #: ../../any.pm_.c:174 ../../any.pm_.c:714 #: ../../install_steps_interactive.pm_.c:899 msgid "The passwords do not match" msgstr "Parolalar uyuşmuyor" #: ../../any.pm_.c:181 msgid "Init Message" msgstr "Init Mesajları" #: ../../any.pm_.c:183 msgid "Open Firmware Delay" msgstr "Firmware hız aç" #: ../../any.pm_.c:184 msgid "Kernel Boot Timeout" msgstr "Çekirdek Boot zaman aşımı" #: ../../any.pm_.c:185 msgid "Enable CD Boot?" msgstr "Cd den bootu aktif ?" #: ../../any.pm_.c:186 msgid "Enable OF Boot?" msgstr "OF dan bootu aktif ?" #: ../../any.pm_.c:187 msgid "Default OS?" msgstr "Öntanımlı İşletim sistemi?" #: ../../any.pm_.c:209 msgid "" "Here are the different entries.\n" "You can add some more or change the existing ones." msgstr "" "Buradaki birbirinden farklı seçeneklere yenilerini ekleyebilir,\n" "ya da mevcut olanları değiştirebilirsiniz." #: ../../any.pm_.c:219 ../../printerdrake.pm_.c:356 msgid "Add" msgstr "Ekle" #: ../../any.pm_.c:219 ../../any.pm_.c:725 ../../diskdrake.pm_.c:46 #: ../../printerdrake.pm_.c:356 msgid "Done" msgstr "Bitti" #: ../../any.pm_.c:219 #, fuzzy msgid "Modify" msgstr "RAID'i değiştir" #: ../../any.pm_.c:227 msgid "Which type of entry do you want to add?" msgstr "Ne tür bir giriş yapmak istiyorsunuz?" #: ../../any.pm_.c:228 msgid "Linux" msgstr "Linux" #: ../../any.pm_.c:228 msgid "Other OS (SunOS...)" msgstr "Diğer işletim sistemleri (SunOS...)" #: ../../any.pm_.c:229 msgid "Other OS (MacOS...)" msgstr "Diğer işletim sistemleri (MacOS...)" #: ../../any.pm_.c:229 msgid "Other OS (windows...)" msgstr "Diğer işletim sistemleri (Windows...)" #: ../../any.pm_.c:249 ../../any.pm_.c:251 msgid "Image" msgstr "Görüntü" #: ../../any.pm_.c:252 ../../any.pm_.c:263 msgid "Root" msgstr "Kök" #: ../../any.pm_.c:253 ../../any.pm_.c:282 msgid "Append" msgstr "Sonuna ekle" #: ../../any.pm_.c:257 msgid "Initrd" msgstr "Initrd" #: ../../any.pm_.c:258 msgid "Read-write" msgstr "Oku-yaz" #: ../../any.pm_.c:265 msgid "Table" msgstr "Tablo" #: ../../any.pm_.c:266 msgid "Unsafe" msgstr "Güvensiz" #: ../../any.pm_.c:273 ../../any.pm_.c:278 ../../any.pm_.c:281 msgid "Label" msgstr "Etiket" #: ../../any.pm_.c:275 ../../any.pm_.c:286 msgid "Default" msgstr "Öntanımlı" #: ../../any.pm_.c:283 msgid "Initrd-size" msgstr "Initrd-size" #: ../../any.pm_.c:285 msgid "NoVideo" msgstr "" #: ../../any.pm_.c:293 msgid "Remove entry" msgstr "Girdiyi sil" #: ../../any.pm_.c:296 msgid "Empty label not allowed" msgstr "Boş etiket kabul edilemez" #: ../../any.pm_.c:297 msgid "This label is already used" msgstr "Bu etiket kullanımda" #: ../../any.pm_.c:316 msgid "What type of partitioning?" msgstr "Ne tip bir bölümleme istiyorsunuz?" #: ../../any.pm_.c:604 #, c-format msgid "Found %s %s interfaces" msgstr "%s %s arayüzü bulundu" #: ../../any.pm_.c:605 msgid "Do you have another one?" msgstr "Başka var mı?" #: ../../any.pm_.c:606 #, c-format msgid "Do you have any %s interfaces?" msgstr "Hiç %s arayüzü var mı?" #: ../../any.pm_.c:608 ../../interactive.pm_.c:100 ../../my_gtk.pm_.c:615 #: ../../printerdrake.pm_.c:237 msgid "No" msgstr "Hayır" #: ../../any.pm_.c:608 ../../interactive.pm_.c:100 ../../my_gtk.pm_.c:615 msgid "Yes" msgstr "Evet" #: ../../any.pm_.c:609 msgid "See hardware info" msgstr "Donanım bilgilerine bak" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../any.pm_.c:644 #, c-format msgid "Installing driver for %s card %s" msgstr "%s kartı (%s) için sürücü yükleniyor" #: ../../any.pm_.c:645 #, c-format msgid "(module %s)" msgstr "(modül %s)" #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../any.pm_.c:656 #, c-format msgid "Which %s driver should I try?" msgstr "Hangi %s sürücüsü denensin?" #: ../../any.pm_.c:664 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "Bazı durumlarda, %s sürücü düzgün çalışmak için fazladan bilgi isteyebilir.\n" "Sürücüler için fazladan bir özellik belirtmek mi istersiniz, yoksa\n" "sürücülerin gerekli bilgiler için donanımınızı tanımasını mı istersiniz? \n" "Bazen tanımlama makinanızı kilitleyebilir ama kilitlenmeden dolayı \n" "makinanıza herhangi bir zarar gelmez." #: ../../any.pm_.c:669 msgid "Autoprobe" msgstr "Otomatik Tara" #: ../../any.pm_.c:669 msgid "Specify options" msgstr "Seçenekleri belirt" #: ../../any.pm_.c:673 #, c-format msgid "You may now provide its options to module %s." msgstr "Şimdi %s modülüne parametreler girebilirsiniz." #: ../../any.pm_.c:679 #, c-format msgid "" "You may now provide its options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "İsterseniz şimdi %s modülünün parametrelerini belirtebilirsiniz.\n" "Parametreler``isim=değer isim2=değer2...'' şeklinde olmalıdır.\n" "Örneğin ``io=0x300 irq=7''" #: ../../any.pm_.c:682 msgid "Module options:" msgstr "Modül seçenekleri:" #: ../../any.pm_.c:693 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "%s modülünün yüklenmesi başarısız oldu.\n" "Tekrar başka bir parametre ile denemek ister misiniz?" #: ../../any.pm_.c:711 #, c-format msgid "(already added %s)" msgstr "(%s zaten ekli)" #: ../../any.pm_.c:715 msgid "This password is too simple" msgstr "Zayıf bir parola seçtiniz!" #: ../../any.pm_.c:716 msgid "Please give a user name" msgstr "Lütfen bir kullanıcı adı verin" #: ../../any.pm_.c:717 msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" "Kullanıcı adında sadece küçük harfler, sayılar, `-' ve `_' karakterlerib " "bulunabilir" #: ../../any.pm_.c:718 msgid "This user name is already added" msgstr "Bu kullanıcı adı daha önce eklenmiş" #: ../../any.pm_.c:722 msgid "Add user" msgstr "Kullanıcı ekle" #: ../../any.pm_.c:723 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Bir kullanıcı girin\n" "%s" #: ../../any.pm_.c:724 msgid "Accept user" msgstr "Kullanıcıyı etkinleştir" #: ../../any.pm_.c:735 msgid "Real name" msgstr "Gerçek adı" #: ../../any.pm_.c:736 ../../printerdrake.pm_.c:97 #: ../../printerdrake.pm_.c:131 msgid "User name" msgstr "Kullanıcı adı" #: ../../any.pm_.c:739 msgid "Shell" msgstr "Kabuk" #: ../../any.pm_.c:741 msgid "Icon" msgstr "İkon" #: ../../any.pm_.c:762 msgid "Autologin" msgstr "Otomatik login" #: ../../any.pm_.c:763 msgid "" "I can set up your computer to automatically log on one user.\n" "If you don't want to use this feature, click on the cancel button." msgstr "" "Bilgisayarınız açıldığında otomatik olarak bir kullanıcı girişi\n" "olmasını sağlayabilirim. Bu özelliği kullanmak istemiyorsanız\n" "vazgeç düğmesine basın." #: ../../any.pm_.c:765 msgid "Choose the default user:" msgstr "Varsayılan kullanıcıyı seçin:" #: ../../any.pm_.c:766 msgid "Choose the window manager to run:" msgstr "Çalıştırmak istediğiniz pencere yöneticisini seçin:" # NOTE: this message will be displayed at boot time; that is # only the ascii charset will be available on most machines # so use only 7bit for this message (and do transliteration or # leave it in English, as it is the best for your language) # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm_.c:262 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system in the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" "%s isletim sistemi secim programina hos geldiniz!\n" "\n" "Yukaridaki listedeki isletim sistemlerinden birini seçin\n" "ya da ontanimli olanın acilmasi icin %d saniye bekleyin.\n" "\n" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm_.c:795 msgid "Welcome to GRUB the operating system chooser!" msgstr "İsletim sistemi secici GRUB'a hos geldiniz!" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #: ../../bootloader.pm_.c:796 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "" "Bir secenegi isaretli duruma getirmek icin %c ve %c tuslarini kullanin." # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #: ../../bootloader.pm_.c:797 msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "Sistemi secili isletim sistemiyle acmak icin entere," # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #: ../../bootloader.pm_.c:798 msgid "commands before booting, or 'c' for a command-line." msgstr "" "acilistan once komutlari duzenlemek icin 'e', komutsatiri icin ise 'c' basin" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #: ../../bootloader.pm_.c:799 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "Isaretli secenek %d saniye icinde sistemi acacak." #: ../../bootloader.pm_.c:803 msgid "not enough room in /boot" msgstr "/boot içinde yeterli yer yok" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #: ../../bootloader.pm_.c:895 msgid "Desktop" msgstr "Masaüstü" #: ../../bootloader.pm_.c:895 msgid "Start Menu" msgstr "Başlat Menüsü" #: ../../bootlook.pm_.c:46 msgid "no help implemented yet.\n" msgstr "bu konuda yardım bulunmamaktadır.\n" #: ../../bootlook.pm_.c:62 msgid "Boot Style Configuration" msgstr "Boot stili ayarları" #: ../../bootlook.pm_.c:79 msgid "/_File" msgstr "/_Dosya" #: ../../bootlook.pm_.c:81 msgid "/File/_New" msgstr "/Dosya/_Yeni" #: ../../bootlook.pm_.c:82 msgid "N" msgstr "Y" #: ../../bootlook.pm_.c:84 msgid "/File/_Open" msgstr "/Dosya/_Aç" #: ../../bootlook.pm_.c:85 msgid "O" msgstr "A" #: ../../bootlook.pm_.c:87 msgid "/File/_Save" msgstr "/Dosya/_Kaydet" #: ../../bootlook.pm_.c:88 msgid "S" msgstr "K" #: ../../bootlook.pm_.c:90 msgid "/File/Save _As" msgstr "/Dosya/_Farklı Kaydet" #: ../../bootlook.pm_.c:91 msgid "/File/-" msgstr "/Dosya/-" #: ../../bootlook.pm_.c:93 msgid "/File/_Quit" msgstr "/Dosya/_Çıkış" #: ../../bootlook.pm_.c:94 msgid "Q" msgstr "Ç" #: ../../bootlook.pm_.c:96 msgid "/_Options" msgstr "/_Ayarlar" #: ../../bootlook.pm_.c:98 msgid "/Options/Test" msgstr "/Ayarlar/Test" #: ../../bootlook.pm_.c:99 msgid "/_Help" msgstr "/_Yardım" #: ../../bootlook.pm_.c:101 msgid "/Help/_About..." msgstr "/Yardım/_Hakkında...." #: ../../bootlook.pm_.c:111 ../../standalone/drakgw_.c:634 #: ../../standalone/draknet_.c:262 ../../standalone/tinyfirewall_.c:57 msgid "Configure" msgstr "Ayarla" #: ../../bootlook.pm_.c:114 #, fuzzy, c-format msgid "" "You are currently using %s as Boot Manager.\n" "Click on Configure to launch the setup wizard." msgstr "İnternet Bağlantısı Paylaşımı" #: ../../bootlook.pm_.c:121 #, fuzzy msgid "Lilo/grub mode" msgstr "Çevirme kipi" #: ../../bootlook.pm_.c:131 msgid "NewStyle Categorizing Monitor" msgstr "" #: ../../bootlook.pm_.c:134 #, fuzzy msgid "NewStyle Monitor" msgstr "Monitör" #: ../../bootlook.pm_.c:137 #, fuzzy msgid "Traditional Monitor" msgstr "Monitörü Değiştir" #: ../../bootlook.pm_.c:140 msgid "Traditional Gtk+ Monitor" msgstr "" #: ../../bootlook.pm_.c:144 msgid "Launch Aurora at boot time" msgstr "Aurora yı her boot'ta çalıştır" #: ../../bootlook.pm_.c:169 msgid "Boot mode" msgstr "Boot(Açılış) kipi" #: ../../bootlook.pm_.c:179 msgid "Launch the X-Window system at start" msgstr "X-Window sistemini her başlangıçta çalıştır" #: ../../bootlook.pm_.c:187 msgid "No, I don't want autologin" msgstr "Hayır, Otomatik giriş(login) istemiyorum" #: ../../bootlook.pm_.c:193 msgid "Yes, I want autologin with this (user, desktop)" msgstr "" "Evet, Ben Otomatik girişi bu özelliklerle istiyorum (kullanıcı,masaüstü" #: ../../bootlook.pm_.c:210 msgid "System mode" msgstr "Sistem Kipi" #: ../../bootlook.pm_.c:218 ../../standalone/draknet_.c:88 #: ../../standalone/draknet_.c:120 ../../standalone/draknet_.c:184 #: ../../standalone/draknet_.c:302 ../../standalone/draknet_.c:394 #: ../../standalone/draknet_.c:471 ../../standalone/draknet_.c:507 #: ../../standalone/draknet_.c:609 msgid "OK" msgstr "TAMAM" #: ../../bootlook.pm_.c:220 ../../install_steps_gtk.pm_.c:576 #: ../../interactive.pm_.c:110 ../../interactive.pm_.c:265 #: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:357 #: ../../my_gtk.pm_.c:360 ../../my_gtk.pm_.c:616 #: ../../standalone/drakgw_.c:639 ../../standalone/draknet_.c:95 #: ../../standalone/draknet_.c:127 ../../standalone/draknet_.c:295 #: ../../standalone/draknet_.c:483 ../../standalone/draknet_.c:623 #: ../../standalone/tinyfirewall_.c:63 msgid "Cancel" msgstr "İptal" #: ../../bootlook.pm_.c:297 msgid "can not open /etc/inittab for reading: $!" msgstr "\"/etc/inittab\" dosyası okumak için açılamadı : $!" #: ../../bootlook.pm_.c:351 msgid "can not open /etc/sysconfig/autologin for reading: $!" msgstr "\"/etc/sysconfig/autologin\" dosyası okumak için açılamadı : $!" #: ../../bootlook.pm_.c:416 ../../standalone/drakboot_.c:47 msgid "Installation of LILO failed. The following error occured:" msgstr "LILO kurulumu başarısız oldu. Oluşan hata:" #: ../../common.pm_.c:634 msgid "GB" msgstr "GB" #: ../../common.pm_.c:634 msgid "KB" msgstr "KB" #: ../../common.pm_.c:634 ../../diskdrake.pm_.c:660 #: ../../install_steps_graphical.pm_.c:287 #: ../../install_steps_graphical.pm_.c:334 msgid "MB" msgstr "MB" #: ../../common.pm_.c:642 msgid "TB" msgstr "TB" #: ../../common.pm_.c:655 #, c-format msgid "%d minutes" msgstr "%d dakika" #: ../../common.pm_.c:657 msgid "1 minute" msgstr "1 dakika" #: ../../common.pm_.c:659 #, c-format msgid "%d seconds" msgstr "%d saniye" #: ../../diskdrake.pm_.c:21 ../../diskdrake.pm_.c:462 msgid "Create" msgstr "Oluştur" #: ../../diskdrake.pm_.c:22 msgid "Unmount" msgstr "Ayır" #: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:464 msgid "Delete" msgstr "Sil" #: ../../diskdrake.pm_.c:23 msgid "Format" msgstr "Biçimle" #: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:653 msgid "Resize" msgstr "Yeniden Boyutlandır" #: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:462 #: ../../diskdrake.pm_.c:518 msgid "Type" msgstr "Tip" #: ../../diskdrake.pm_.c:24 ../../diskdrake.pm_.c:539 msgid "Mount point" msgstr "Bağlama noktası" #: ../../diskdrake.pm_.c:38 msgid "Write /etc/fstab" msgstr "/etc/fstab'a Yaz" #: ../../diskdrake.pm_.c:39 msgid "Toggle to expert mode" msgstr "Uzman kipine geç" #: ../../diskdrake.pm_.c:40 msgid "Toggle to normal mode" msgstr "Normal kipe geç" #: ../../diskdrake.pm_.c:41 msgid "Restore from file" msgstr "Dosyadan geri çağır" #: ../../diskdrake.pm_.c:42 msgid "Save in file" msgstr "Dosyaya kaydet" #: ../../diskdrake.pm_.c:43 msgid "Wizard" msgstr "Sihirbaz" #: ../../diskdrake.pm_.c:44 msgid "Restore from floppy" msgstr "Disketten geri çağır" #: ../../diskdrake.pm_.c:45 msgid "Save on floppy" msgstr "Diskete kaydet" #: ../../diskdrake.pm_.c:49 msgid "Clear all" msgstr "Hepsini temizle" #: ../../diskdrake.pm_.c:54 msgid "Format all" msgstr "Hepsini biçimlendir" #: ../../diskdrake.pm_.c:55 msgid "Auto allocate" msgstr "Otomatik ayır" #: ../../diskdrake.pm_.c:59 msgid "All primary partitions are used" msgstr "Tüm birincil bölümler kullanıldı" #: ../../diskdrake.pm_.c:59 msgid "I can't add any more partition" msgstr "Daha fazla bölüm eklenemez" #: ../../diskdrake.pm_.c:59 msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "Daha fazla bölüm oluşturmak için, bir bölümü silip mantıksal bölüm oluşturun" #: ../../diskdrake.pm_.c:61 msgid "Not enough space for auto-allocating" msgstr "Otomatik bölümleme için yeterli boş alan yok" #: ../../diskdrake.pm_.c:63 msgid "Undo" msgstr "Geri al" #: ../../diskdrake.pm_.c:64 msgid "Write partition table" msgstr "Bölüm tablosunu Yaz" #: ../../diskdrake.pm_.c:65 ../../install_steps_interactive.pm_.c:185 #, fuzzy msgid "More" msgstr "Taşı" #: ../../diskdrake.pm_.c:116 msgid "Ext2" msgstr "Ext2" #: ../../diskdrake.pm_.c:116 msgid "FAT" msgstr "FAT" #: ../../diskdrake.pm_.c:116 msgid "HFS" msgstr "HFS" #: ../../diskdrake.pm_.c:116 msgid "SunOS" msgstr "SunOS" #: ../../diskdrake.pm_.c:116 msgid "Swap" msgstr "Takas" #: ../../diskdrake.pm_.c:117 msgid "Empty" msgstr "Boş" #: ../../diskdrake.pm_.c:117 ../../install_steps_gtk.pm_.c:407 #: ../../mouse.pm_.c:145 msgid "Other" msgstr "Diğer" #: ../../diskdrake.pm_.c:123 msgid "Filesystem types:" msgstr "Dosya sistemi tipi:" #: ../../diskdrake.pm_.c:132 ../../install_steps_gtk.pm_.c:577 msgid "Details" msgstr "Ayrıntılar" #: ../../diskdrake.pm_.c:147 msgid "" "You have one big FAT partition\n" "(generally used by MicroSoft Dos/Windows).\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Tek bir büyük disk bölümünüz var\n" "(genellikle MS DOS/Windows tarafından kullanılır).\n" "Öncelikle bu disk bölümünün boyutunu değiştirmenizi\n" "öneriyoruz. Önce bölümün üzerine, sonra \"Yeniden\n" "Boyutlandır\" düğmesine tıklayınız" #: ../../diskdrake.pm_.c:152 msgid "Please make a backup of your data first" msgstr "Önce verinizin yedeğini alınız" #: ../../diskdrake.pm_.c:152 ../../diskdrake.pm_.c:170 #: ../../diskdrake.pm_.c:179 ../../diskdrake.pm_.c:570 #: ../../diskdrake.pm_.c:592 msgid "Read carefully!" msgstr "Dikkatli Okuyun!" #: ../../diskdrake.pm_.c:155 msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Aboot'u kullanmayı planlıyorsanız, boş disk alanı (2048 sektör yeterlidir.)\n" "bırakmayı ihmal etmeyin." #: ../../diskdrake.pm_.c:170 msgid "Be careful: this operation is dangerous." msgstr "Dikkatlı olun: bu operasyon tehlikelidir." #: ../../diskdrake.pm_.c:214 ../../install_steps.pm_.c:72 #: ../../install_steps_interactive.pm_.c:37 #: ../../install_steps_interactive.pm_.c:322 ../../standalone/diskdrake_.c:66 msgid "Error" msgstr "Hata" #: ../../diskdrake.pm_.c:238 ../../diskdrake.pm_.c:748 msgid "Mount point: " msgstr "Bağlama noktası: " #: ../../diskdrake.pm_.c:239 ../../diskdrake.pm_.c:298 msgid "Device: " msgstr "Aygıt: " #: ../../diskdrake.pm_.c:240 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "DOS sürücü harfi: %s (sadece tahmin)\n" #: ../../diskdrake.pm_.c:244 ../../diskdrake.pm_.c:251 #: ../../diskdrake.pm_.c:301 msgid "Type: " msgstr "Tip: " #: ../../diskdrake.pm_.c:248 msgid "Name: " msgstr "İsim: " #: ../../diskdrake.pm_.c:253 #, c-format msgid "Start: sector %s\n" msgstr "Başlangıç: sektör %s\n" #: ../../diskdrake.pm_.c:254 #, c-format msgid "Size: %s" msgstr "Boyut: %s" #: ../../diskdrake.pm_.c:256 #, c-format msgid ", %s sectors" msgstr ", %s sektör" #: ../../diskdrake.pm_.c:258 #, c-format msgid "Cylinder %d to cylinder %d\n" msgstr "Silindir %d 'den silindir %d'ye\n" #: ../../diskdrake.pm_.c:259 msgid "Formatted\n" msgstr "Biçimlendirilmiş\n" #: ../../diskdrake.pm_.c:260 msgid "Not formatted\n" msgstr "Biçimlendirilmemiş\n" #: ../../diskdrake.pm_.c:261 msgid "Mounted\n" msgstr "Bağlı\n" #: ../../diskdrake.pm_.c:262 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: ../../diskdrake.pm_.c:264 #, c-format msgid "Loopback file(s): %s\n" msgstr "Loopback dosyası: %s\n" #: ../../diskdrake.pm_.c:265 msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Öntanımlı olarak açılacak bölüm\n" " (MS-DOS açılışı için)\n" #: ../../diskdrake.pm_.c:267 #, c-format msgid "Level %s\n" msgstr "Seviye %s\n" #: ../../diskdrake.pm_.c:268 #, c-format msgid "Chunk size %s\n" msgstr "Parça boyutu %s\n" #: ../../diskdrake.pm_.c:269 #, c-format msgid "RAID-disks %s\n" msgstr "RAID-diskleri %s\n" #: ../../diskdrake.pm_.c:271 #, c-format msgid "Loopback file name: %s" msgstr "Loopback dosyası ismi: %s" #: ../../diskdrake.pm_.c:274 msgid "" "\n" "Chances are, this partition is\n" "a Driver partition, you should\n" "probably leave it alone.\n" msgstr "" #: ../../diskdrake.pm_.c:277 msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" #: ../../diskdrake.pm_.c:294 msgid "Please click on a partition" msgstr "Lütfen bir bölüm üzerine tıklayın" #: ../../diskdrake.pm_.c:299 #, c-format msgid "Size: %s\n" msgstr "Boyut: %s\n" #: ../../diskdrake.pm_.c:300 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Geometri: %s silindir, %s kafa, %s sektör\n" #: ../../diskdrake.pm_.c:302 #, c-format msgid "LVM-disks %s\n" msgstr "LVM-diskleri %s\n" #: ../../diskdrake.pm_.c:303 #, c-format msgid "Partition table type: %s\n" msgstr "Bölüm tablosu tipi: %s\n" #: ../../diskdrake.pm_.c:304 #, c-format msgid "on bus %d id %d\n" msgstr "%d veriyolunda, %d no'lu\n" #: ../../diskdrake.pm_.c:320 msgid "Mount" msgstr "Bağla" #: ../../diskdrake.pm_.c:322 msgid "Active" msgstr "Etkin" #: ../../diskdrake.pm_.c:324 msgid "Add to RAID" msgstr "RAID'e ekle" #: ../../diskdrake.pm_.c:326 msgid "Remove from RAID" msgstr "RAID'den ayır" #: ../../diskdrake.pm_.c:328 msgid "Modify RAID" msgstr "RAID'i değiştir" #: ../../diskdrake.pm_.c:330 msgid "Add to LVM" msgstr "LVM'e ekle" #: ../../diskdrake.pm_.c:332 msgid "Remove from LVM" msgstr "LVM'den ayır" #: ../../diskdrake.pm_.c:334 msgid "Use for loopback" msgstr "Loopback için kullan" #: ../../diskdrake.pm_.c:341 msgid "Choose action" msgstr "Monitörünüzü seçin" #: ../../diskdrake.pm_.c:435 msgid "" "Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " "1024).\n" "Either you use LILO and it won't work, or you don't use LILO and you don't " "need /boot" msgstr "" "Üzgünüm, /boot bölümünü bu sürücünün üstünde oluşturamayacağım. \n" "Bu durumda ya LILO kullanmayacaksınız ve /boot bölümüne ihtiyacınız \n" "yok, veya LILO kullanmayı denersiniz ancak LILO çalışmayabilir." #: ../../diskdrake.pm_.c:439 msgid "" "The partition you've selected to add as root (/) is physically located " "beyond\n" "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" "If you plan to use the LILO boot manager, be careful to add a /boot partition" msgstr "" "Seçtiğiniz bölüm fiziksel alanın üstünde (1024. silindirin dışında) ve hiç \n" "/boot bölümünüz yok. Lilo açılış yöneticisini kullanmak istiyorsanız, \n" "/boot bölümünü eklerken dikkatli olmalısınız." #: ../../diskdrake.pm_.c:445 msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "So be careful to add a /boot partition" msgstr "" "Bir yazılımsal RAID bölümünü kök dizini (/) olarak atadınız.\n" "Böyle bir durumda hiçbir açılış yükleyici /boot bölümü olmadan çalışamaz.\n" "Bu nedenle bir /boot bölümü eklemeyi ihmal etmeyiniz." #: ../../diskdrake.pm_.c:462 ../../diskdrake.pm_.c:464 #, c-format msgid "Use ``%s'' instead" msgstr "Yerine ``%s'' kullan" #: ../../diskdrake.pm_.c:468 msgid "Use ``Unmount'' first" msgstr "Önce ``Ayır''ı kullan" #: ../../diskdrake.pm_.c:469 ../../diskdrake.pm_.c:513 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" "%s bölümünün tipini değiştirdikten sonra, bu bölümdeki tüm bilgiler " "silinecektir" #: ../../diskdrake.pm_.c:481 msgid "Continue anyway?" msgstr "Devam edilsin mi?" #: ../../diskdrake.pm_.c:486 msgid "Quit without saving" msgstr "Kaydetmeden Çık" #: ../../diskdrake.pm_.c:486 msgid "Quit without writing the partition table?" msgstr "Bölüm tablosunu kaydetmeden mi çıkıyorsunuz?" #: ../../diskdrake.pm_.c:516 msgid "Change partition type" msgstr "Bölüm tipini Değiştir" #: ../../diskdrake.pm_.c:517 msgid "Which filesystem do you want?" msgstr "Hangi dosya sistemini istiyorsunuz?" #: ../../diskdrake.pm_.c:520 ../../diskdrake.pm_.c:780 msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "32MB den küçük disk bölümlerinde ReiserFS kullanamazsınız" #: ../../diskdrake.pm_.c:537 #, c-format msgid "Where do you want to mount loopback file %s?" msgstr "%s loopback aygıtınnereye bağlamak istiyorsunuz?" #: ../../diskdrake.pm_.c:538 #, c-format msgid "Where do you want to mount device %s?" msgstr "%s aygıtını nereye bağlamak istiyorsunuz?" #: ../../diskdrake.pm_.c:542 msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "Bu disk bölümü loopback için kullanıldığından bağlanma noktasından " "vazgeçilemiyor.\n" "Önce loopback'i kaldırın." #: ../../diskdrake.pm_.c:561 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "%s bölümü formatlandıktan sonra bu bölümdeki tüm bilgiler silinecektir" #: ../../diskdrake.pm_.c:563 msgid "Formatting" msgstr "Biçimleniyor" #: ../../diskdrake.pm_.c:564 #, c-format msgid "Formatting loopback file %s" msgstr "Loopback dosyası biçimlendiriliyor: %s" #: ../../diskdrake.pm_.c:565 ../../install_steps_interactive.pm_.c:430 #, c-format msgid "Formatting partition %s" msgstr "Biçimlendirilen bölüm: %s" #: ../../diskdrake.pm_.c:570 msgid "After formatting all partitions," msgstr "Tüm bölümleri biçimledikten sonra, " #: ../../diskdrake.pm_.c:570 msgid "all data on these partitions will be lost" msgstr "bu bölümlerdeki tüm veriler kaybolacaktır" #: ../../diskdrake.pm_.c:576 msgid "Move" msgstr "Taşı" #: ../../diskdrake.pm_.c:577 msgid "Which disk do you want to move it to?" msgstr "Hangi diske taşımak istiyorsunuz?" #: ../../diskdrake.pm_.c:578 msgid "Sector" msgstr "Sektör" #: ../../diskdrake.pm_.c:579 msgid "Which sector do you want to move it to?" msgstr "Hangi sektöre taşımak istiyorsunuz?" #: ../../diskdrake.pm_.c:582 msgid "Moving" msgstr "Taşınıyor" #: ../../diskdrake.pm_.c:582 msgid "Moving partition..." msgstr "Bölüm taşınıyor..." #: ../../diskdrake.pm_.c:592 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "%s sürücüsünün bölüm tablosu diske yazılacak!" #: ../../diskdrake.pm_.c:594 msgid "You'll need to reboot before the modification can take place" msgstr "Yeni ayarların etkinleşmesi için sistemi yeniden başlatmanız gerekiyor" #: ../../diskdrake.pm_.c:615 msgid "Computing FAT filesystem bounds" msgstr "Fat dosya sistemi uçları hesaplanıyor" #: ../../diskdrake.pm_.c:615 ../../diskdrake.pm_.c:680 #: ../../install_interactive.pm_.c:107 msgid "Resizing" msgstr "Yeniden boyutlandırılıyor" #: ../../diskdrake.pm_.c:643 msgid "This partition is not resizeable" msgstr "Bu bölüm tekrar boyutlandırılabilir değil" #: ../../diskdrake.pm_.c:648 msgid "All data on this partition should be backed-up" msgstr "Bu bölümedeki tüm bilgiler yedeklenmelidir" #: ../../diskdrake.pm_.c:650 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" "%s bölümü yeniden boyutlandırıldıktan sonra bu bölümdeki tüm bilgiler " "silinecektir" #: ../../diskdrake.pm_.c:660 msgid "Choose the new size" msgstr "Yeni boyutu seçin" #: ../../diskdrake.pm_.c:714 msgid "Create a new partition" msgstr "Yeni bölüm oluştur" #: ../../diskdrake.pm_.c:740 msgid "Start sector: " msgstr "Başlangıç sektörü: " #: ../../diskdrake.pm_.c:744 ../../diskdrake.pm_.c:819 msgid "Size in MB: " msgstr "MB cinsinden boyut: " #: ../../diskdrake.pm_.c:747 ../../diskdrake.pm_.c:822 msgid "Filesystem type: " msgstr "Dosya sistemi tipi: " #: ../../diskdrake.pm_.c:750 msgid "Preference: " msgstr "Özellik: " #: ../../diskdrake.pm_.c:798 msgid "This partition can't be used for loopback" msgstr "Bu disk bölümü loopback için kullanılamaz" #: ../../diskdrake.pm_.c:808 msgid "Loopback" msgstr "Loopback" #: ../../diskdrake.pm_.c:818 msgid "Loopback file name: " msgstr "Loopback dosya ismi: " #: ../../diskdrake.pm_.c:844 msgid "File already used by another loopback, choose another one" msgstr "" "Dosya başka bir loopback tarafından kullanılıyor, başka\n" "bir tane seçin" #: ../../diskdrake.pm_.c:845 msgid "File already exists. Use it?" msgstr "Dosya zaten var. Kullanılsın mı?" #: ../../diskdrake.pm_.c:867 ../../diskdrake.pm_.c:883 msgid "Select file" msgstr "Dosya seç" #: ../../diskdrake.pm_.c:876 msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "Yedek bölüm tablosu aynı ölçüye sahip değil\n" "Devam etmek istiyor musunuz?" #: ../../diskdrake.pm_.c:884 msgid "Warning" msgstr "Uyarı" #: ../../diskdrake.pm_.c:885 msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "Dİsket sürücüye bir disket yerleştirin\n" "Bu disketteki tüm bilgiler yok olacaktır" #: ../../diskdrake.pm_.c:896 msgid "Trying to rescue partition table" msgstr "Bölüm tablosunu kurtarılmaya çalışılıyor" #: ../../diskdrake.pm_.c:905 msgid "device" msgstr "aygıt" #: ../../diskdrake.pm_.c:906 msgid "level" msgstr "seviye" #: ../../diskdrake.pm_.c:907 msgid "chunk size" msgstr "parça boyutu" #: ../../diskdrake.pm_.c:919 msgid "Choose an existing RAID to add to" msgstr "Eklemek için mevcut bir RAID seçin" #: ../../diskdrake.pm_.c:920 ../../diskdrake.pm_.c:946 msgid "new" msgstr "yeni" #: ../../diskdrake.pm_.c:944 msgid "Choose an existing LVM to add to" msgstr "Eklemek için mevcut bir LVM seçin" #: ../../diskdrake.pm_.c:949 msgid "LVM name?" msgstr "" #: ../../diskdrake.pm_.c:976 msgid "Removable media automounting" msgstr "Takılıp sökülebilir araçların otomatik bağlanması" #: ../../diskdrake.pm_.c:977 msgid "Rescue partition table" msgstr "Bölüm tablosunu kurtar" #: ../../diskdrake.pm_.c:979 msgid "Reload" msgstr "Tekrar yükle" #: ../../fs.pm_.c:88 ../../fs.pm_.c:95 ../../fs.pm_.c:101 ../../fs.pm_.c:107 #, c-format msgid "%s formatting of %s failed" msgstr "%s biçimlemesinde %s bölüm hatası" #: ../../fs.pm_.c:135 #, c-format msgid "I don't know how to format %s in type %s" msgstr "%s'i nasıl biçimlendireceğimi bilmiyorum (Tip: %s)" #: ../../fs.pm_.c:220 msgid "mount failed: " msgstr "bağlama başarısız: " #: ../../fs.pm_.c:232 #, c-format msgid "error unmounting %s: %s" msgstr "%s ayrılırken hata oluştu: %s" #: ../../fsedit.pm_.c:21 #, fuzzy msgid "simple" msgstr "Dosya" #: ../../fsedit.pm_.c:30 msgid "server" msgstr "sunucu" #: ../../fsedit.pm_.c:261 msgid "Mount points must begin with a leading /" msgstr "Bağlama noktaları / ile başlamalıdır" #: ../../fsedit.pm_.c:264 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "Zaten bağlama noktası %s olan bir bölüm bulunmakta\n" #: ../../fsedit.pm_.c:272 #, c-format msgid "Circular mounts %s\n" msgstr "Döngüsel bağlama %s\n" #: ../../fsedit.pm_.c:284 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "" #: ../../fsedit.pm_.c:285 msgid "This directory should remain within the root filesystem" msgstr "Bu dizin kök dosya sistemi içinde kalmalı" #: ../../fsedit.pm_.c:286 msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n" msgstr "" "Bu bağlama noktası için gerçek bir dosya sistemine (ext2, reisrfs)\n" "ihtiyaç var.\n" #: ../../fsedit.pm_.c:368 #, c-format msgid "Error opening %s for writing: %s" msgstr "Yazmak için açılan %s'de hata: %s" #: ../../fsedit.pm_.c:452 msgid "" "An error has occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "Bir hata oluştu. Yeni dosya sisteminin oluşturulacağı geçerli bir sürücü " "bulunamadı. Bu problemin kaynağı için donanımınızı kontrol edin" #: ../../fsedit.pm_.c:466 msgid "You don't have any partitions!" msgstr "Hiç disk bölümünüz yok!" #: ../../help.pm_.c:9 msgid "" "Please choose your preferred language for installation and system usage." msgstr "Kurulum ve sistem kullanımı için istediğiniz dili seçin." #: ../../help.pm_.c:12 msgid "" "You need to accept the terms of the above license to continue installation.\n" "\n" "\n" "Please click on \"Accept\" if you agree with its terms.\n" "\n" "\n" "Please click on \"Refuse\" if you disagree with its terms. Installation will " "end without modifying your current\n" "configuration." msgstr "" "Kuruluma devam etmek için yukarıdaki lisansın şartlarını kabul etmelisiniz.\n" "\n" "\n" "Eğer şartları kabul ediyorsanız lütfen \"Kabul et\" düğmesine basın.\n" "\n" "\n" "Şartları kabul etmiyorsanız lütfen \"Kabul etme\" düğmesine basın.\n" "Kurulum şu andaki ayarlarınızı değiştirmeden kapanacaktır." #: ../../help.pm_.c:22 msgid "Choose the layout corresponding to your keyboard from the list above" msgstr "Yukarıdaki listeden klavyenize uyan düzenini seçiniz" #: ../../help.pm_.c:25 msgid "" "If you wish other languages (than the one you choose at\n" "beginning of installation) will be available after installation, please " "chose\n" "them in list above. If you want select all, you just need to select \"All\"." msgstr "" "Diğer dillerin (kuruluma başladığınız sırada seçtiğinizden başka) " "kurulumdan\n" "sonra kullanılabilmesini istiyorsanız, lütfen o dilleri yukarıdaki listeden\n" "seçin. Tümünü seçmek isterseniz, sadece \"Tümü\" düğmesine " "klikleyebilirsiniz." #: ../../help.pm_.c:30 msgid "" "Please choose \"Install\" if there are no previous version of " "Linux-Mandrake\n" "installed or if you wish to use several operating systems.\n" "\n" "\n" "Please choose \"Update\" if you wish to update an already installed version " "of Linux-Mandrake.\n" "\n" "\n" "Depend of your knowledge in GNU/Linux, you can choose one of the following " "levels to install or update your\n" "Linux-Mandrake operating system:\n" "\n" "\t* Recommended: if you have never installed a GNU/Linux operating system " "choose this. Installation will be\n" "\t be very easy and you will be asked only on few questions.\n" "\n" "\n" "\t* Customized: if you are familiar enough with GNU/Linux, you may choose " "the primary usage (workstation, server,\n" "\t development) of your system. You will need to answer to more questions " "than in \"Recommended\" installation\n" "\t class, so you need to know how GNU/Linux works to choose this " "installation class.\n" "\n" "\n" "\t* Expert: if you have a good knowledge in GNU/Linux, you can choose this " "installation class. As in \"Customized\"\n" "\t installation class, you will be able to choose the primary usage " "(workstation, server, development). Be very\n" "\t careful before choose this installation class. You will be able to " "perform a higly customized installation.\n" "\t Answer to some questions can be very difficult if you haven't a good " "knowledge in GNU/Linux. So, don't choose\n" "\t this installation class unless you know what you are doing." msgstr "" "Eğer sisteminizde Linux-Mandrake'nin eski bir sürümü yoksa, ya da \n" "birden çok sistem kullanmak istiyorsanız lütfen\"Kurulum\"'a klikleyin\n" "\n" "\n" "Linux-Mandrake'nin eski bir sürümünü güncellemek istiyorsanız lütfen\n" "\"Güncelleme\"'ye klikleyin.\n" "\n" "\n" "Linux-Mandrake işletim sistemini kurmak ya da güncellemek için GNU/Linux\n" "hakkındaki deneyiminize bağlı olarak aşağıdaki düzeylerden birini\n" "seçebilirsiniz:\n" "\n" "\t* Tavsiye edilen: Daha önce hiçbir GNU/Linux işletim sistemi " "kurmadıysanız\n" "\t bunu seçin. Kurulum size çok az soru soracak ve çok kolay olacaktır.\n" "\n" "\n" "\t* Özel: GNU/Linux hakkında bir miktar bilginiz ve deneyiminiz varsa bunu\n" "\t seçebilirsiniz. Bu kurulum sırasında kullanacağınız sistemin türünü (iş\n" "\t istasyonu, sunucu, uygulama geliştirme ortamı) seçmeniz istenecektir.\n" "\t \"Tavsiye edilen\" kurulum sınıfında sorulan sorulardan daha fazlası\n" "\t karşınıza çıkacaktır.\n" "\n" "\n" "\t* Uzman: GNU/Linux hakkında yeterli bilgi ve deneyiminiz varsa bu sınıfı\n" "\t seçin. \"Özel\" kurulum sınıfında olduğu gibi burada da sistemi hangi\n" "\t amaçla (iş istasyonu, sunucu, uygulama geliştirme ortamı) " "kullanacağınız\n" "\t sorulacaktır. Bu sınıfı seçerken dikkatli olun. Oldukça özelleşmiş bir\n" "\t kurulum yapacaksınız ve sorulan bazı sorular GNU/Linux hakkında yeterli\n" "\t deneyiminiz yoksa hayli zor olacaktır. Ne yaptığınızdan emin değilseniz\n" "\t asla bu sınıfı seçmeyin." #: ../../help.pm_.c:56 msgid "" "Select:\n" "\n" " - Customized: If you are familiar enough with GNU/Linux, you may then " "choose\n" " the primary usage for your machine. See below for details.\n" "\n" "\n" " - Expert: This supposes that you are fluent with GNU/Linux and want to\n" " perform a highly customized installation. As for a \"Customized\"\n" " installation class, you will be able to select the usage for your " "system.\n" " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE " "DOING!" msgstr "" "Seçim:\n" "\n" " - Özel: Eğer Linux'a aşina iseniz ve ağırlıklı olarak yazılım\n" " geliştirme ile uğraşacaksanız bu seçeneğe tıklayın. Sistemi genel " "amaçlı\n" " kullanacaksanız \"Normal\", yazılım geliştirme amaçlı kullanacaksanız\n" " \"Geliştirme\" ve genel amaçlı sunucu olarak kullanacaksanız \"Sunucu\"\n" " seçeneklerinden birisini seçiniz\n" "\n" "\n" " - Uzman: Eğer GNU/Linux'u biliyorsanız ve tamamen özel bir kurulum\n" " istiyorsanız bu kurulum sınıfı sizin için." #: ../../help.pm_.c:68 msgid "" "You must now define your machine usage. Choices are:\n" "\n" "\t* Workstation: this the ideal choice if you intend to use your machine " "primarily for everyday use, at office or\n" "\t at home.\n" "\n" "\n" "\t* Development: if you intend to use your machine primarily for software " "development, it is the good choice. You\n" "\t will then have a complete collection of software installed in order to " "compile, debug and format source code,\n" "\t or create software packages.\n" "\n" "\n" "\t* Server: if you intend to use this machine as a server, it is the good " "choice. Either a file server (NFS or\n" "\t SMB), a print server (Unix style or Microsoft Windows style), an " "authentication server (NIS), a database\n" "\t server and so on. As such, do not expect any gimmicks (KDE, GNOME, etc.) " "to be installed." msgstr "" "Makinanızı kullanacağınız amaca göre yapabileceğiniz seçimler aşağıdadır: \n" " - İş istasyonu: makinanızı öncelikle günlük kullanım (ofis uygulamaları, " "grafik işleme \n" " ve benzeri işler) için kullanacaksanız bunu seçin.\n" "\n" " - Geliştirme: Adı üstünde. Makinanızı öncelikle yazılım geliştirmek için\n" " kullanacaksanız bunu seçin. Böylece kaynak kodlarını derlemek, debug ve " "\n" " düzenlemek, uygulama paketleri hazırlamak için gerekli her türlü " "uygulamadan\n" " oluşan bir koleksiyon makinanıza kurulacaktır.\n" "\n" " Sunucu: Makinanıza Linux-Mandrake'yi sunucu olarak çalıştırmak için " "kuracaksanız\n" " bunu seçin. Bir dosya sunucusu (NFS ya da SMB), \n" " yazıcı sunucusu (Unix'in lp protokolü ya da Windows tarzı SMB " "yazdırma),\n" " authantication sunucusu (NIS), veri tabanı sunucusu ve benzeri...\n" " Bu durumda KDE, GNOME gibi çekici şeylerin kurulmasını beklemeyin." #: ../../help.pm_.c:84 msgid "" "DrakX will attempt to look for PCI SCSI adapter(s). If DrakX\n" "finds an SCSI adapter and knows which driver to use, it will be " "automatically\n" "installed.\n" "\n" "\n" "If you have no SCSI adapter, an ISA SCSI adapter or a PCI SCSI adapter that\n" "DrakX doesn't recognize, you will be asked if a SCSI adapter is present in " "your\n" "system. If there is no adapter present, you can click on \"No\". If you " "click on\n" "\"Yes\", a list of drivers will be presented from which you can select your\n" "specific adapter.\n" "\n" "\n" "If you have to manually specify your adapter, DrakX will ask if you want to\n" "specify options for it. You should allow DrakX to probe the hardware for " "the\n" "options. This usually works well.\n" "\n" "\n" "If not, you will need to provide options to the driver. Please review the " "User\n" "Guide (chapter 3, section \"Collective informations on your hardware) for " "hints\n" "on retrieving this information from hardware documentation, from the\n" "manufacturer's Web site (if you have Internet access) or from Microsoft " "Windows\n" "(if you have it on your system)." msgstr "" "DrakX PCI SCSI arabirim(ler)inizi bulmaya çalışacak. Eğer bir SCSI\n" "arabirimi bulursa ve hangi sürücüyle çalıştığını da biliyorsa otomatik\n" "olarak bunu kuracaktır.\n" "\n" "\n" "Hiç SCSI arabiriminiz yoksa, bir ISA SCSI kartınız varsa, ya da\n" "DrakX'in tanımadığı bir PCI SCSI kartınız bulunuyorsa, sisteminizde bir " "SCSI\n" "kartınızın olup olmadığı sorulacaktır. Bir SCSI kartına sahip değilseniz " "\"Hayır\"\n" "düğmesine tıklayın. Eğer \"Evet\" düğmesine tıklarsanız, sürücüler " "listesinden\n" "kartınıza uygun bir sürücü seçebilirsiniz.\n" "\n" "\n" "Kartınızı elle tanıtmak zorundaysanız DrakX sizden kartınıza uygun " "opsiyonları\n" "belirlemenizi isteyecektir. Bu, genelde çalışır.\n" "\n" "\n" "Eğer çalışmazsa, sürücü opsiyonlarını öğrenmeniz gereklidir. İnternet\n" "bağlantınız bulunuyorsa, üreticinin veb sitesindeki donanım\n" "dokümanlarından ya da (eğer sisteminizde bulunuyorsa) Microsoft\n" "Windows'dan bu bilgileri bulabilme ipuçları \n" "için Kullanma Kılavuzu'nu (3. Kısım, \"Donanım Üzerine Bilgi Toplanması\"\n" "bölümünü) okuyun." #: ../../help.pm_.c:108 msgid "" "At this point, you need to choose where to install your\n" "Linux-Mandrake operating system on your hard drive. If it is empty or if an\n" "existing operating system uses all the space available on it, you need to\n" "partition it. Basically, partitioning a hard drive consists of logically\n" "dividing it to create space to install your new Linux-Mandrake system.\n" "\n" "\n" "Because the effects of the partitioning process are usually irreversible,\n" "partitioning can be intimidating and stressful if you are an inexperienced " "user.\n" "This wizard simplifies this process. Before beginning, please consult the " "manual\n" "and take your time.\n" "\n" "\n" "You need at least two partitions. One is for the operating system itself and " "the\n" "other is for the virtual memory (also called Swap).\n" "\n" "\n" "If partitions have been already defined (from a previous installation or " "from\n" "another partitioning tool), you just need choose those to use to install " "your\n" "Linux system.\n" "\n" "\n" "If partitions haven't been already defined, you need to create them. \n" "To do that, use the wizard available above. Depending of your hard drive\n" "configuration, several solutions can be available:\n" "\n" "\t* Use existing partition: the wizard has detected one or more existing " "Linux partitions on your hard drive. If\n" "\t you want to keep them, choose this option. \n" "\n" "\n" "\t* Erase entire disk: if you want delete all data and all partitions " "present on your hard drive and replace them by\n" "\t your new Linux-Mandrake system, you can choose this option. Be careful " "with this solution, you will not be\n" "\t able to revert your choice after confirmation.\n" "\n" "\n" "\t* Use the free space on the Windows partition: if Microsoft Windows is " "installed on your hard drive and takes\n" "\t all space available on it, you have to create free space for Linux data. " "To do that you can delete your\n" "\t Microsoft Windows partition and data (see \"Erase entire disk\" or " "\"Expert mode\" solutions) or resize your\n" "\t Microsoft Windows partition. Resizing can be performed without loss of " "any data. This solution is\n" "\t recommended if you want use both Linux-Mandrake and Microsoft Windows on " "same computer.\n" "\n" "\n" "\t Before choosing this solution, please understand that the size of your " "Microsoft\n" "\t Windows partition will be smaller than at present time. It means that " "you will have less free space under\n" "\t Microsoft Windows to store your data or install new software.\n" "\n" "\n" "\t* Expert mode: if you want to partition manually your hard drive, you can " "choose this option. Be careful before\n" "\t choosing this solution. It is powerful but it is very dangerous. You can " "lose all your data very easily. So,\n" "\t don't choose this solution unless you know what you are doing." msgstr "" "Bu noktada, Linux-Mandrake işletim sisteminizi sabit diskinizde\n" "nereye kuracağınızı seçmeniz gerekiyor. Diskiniz boşsa, ya da\n" "halihazırda bir işletim sistemi diskin tamamını kullanıyorsa\n" "diski bölümlendirmeniz gerekmektedir. Temel olarak, bir diski\n" "bölümlendirmek, Linux-Mandrake sistemini kurabilmek için onu\n" "mantıksal olarak bölmek ve böylece boş alan oluşturmak anlamına\n" "gelir.\n" "\n" "\n" "Bölümlendirme işleminin etkilerinin geri dönülmezliği yüzünden\n" "bu işlem, eğer tecrübesizseniz, korkutucu ve stresli bir iş olabilir.\n" "Bu sihirbaz bu işlemi basitleştirmektedir. Başlamadan önce lütfen kılavuza\n" "başvurun.\n" "\n" "\n" "En az iki bölüme ihtiyacınız var. Biri işletim sisteminin kendisi, diğeri " "de\n" "sanal hafıza (takas alanı) için.\n" "\n" "\n" "Bölümler halihazırda tanımlıysa (önceki bir kurulumdan ya da başka bir\n" "bölümlendirme aracından), Linux sisteminizi kurmak için sadece bunları\n" "seçmeniz yeterli olacaktır.\n" "\n" "\n" "Bölümler tanımlanmamışsa, onları oluşturmalısınız. Bunu gerçekleştirmek\n" "için yukarıdaki sihirbazı kullanın. Sabit diskinizin özelliklerine göre\n" "birçok çözüm bulunmaktadır:\n" "\n" "\t* Hazırdaki bölümleri kullan: Sihirbaz, sabit diskinizde hazırda bir\n" "\t ya da daha çok bölüm buldu. Bunları korumak istiyorsanız bunu seçin.\n" "\n" "\n" "\t* Tüm diski temizle: Diskinizdeki tüm veriyi ve bölümleri yok etmek\n" "\t ve bunların yerine Linux-Mandrake sistemini kurmak istiyorsanız bunu\n" "\t seçin. Bu çözümü kullanırken dikkatli olun, doğruladıktan sonra geri\n" "\t dönüşü olmayacaktır.\n" "\n" "\n" "\t* Windows bölümündeki boş alanı kullan: Sabit diskinizde Microsoft Windoz\n" "\t bulunyorsa ve eldeki tüm alanı o kullanıyorsa, Linux verileri için boş\n" "\t alan oluşturmanız gereklidir. Bunu yapabilmek için Windows bölümünüzü " "ve\n" "\t verilerini silebilir, (\"Tüm diski temizle\" ya da \"Uzman Kipi\" " "çözümlerine\n" "\t bakınız) ya da Windows bölümünün boyutunu değiştirebilirsiniz. Boyutun\n" "\t değiştirilmesi işlemi hiçbir veri kaybına neden olmadan yapılabilir.\n" "\t Bu çözüm, aynı makinada hem Linux-Mandrake, hem de Windows " "kullanılacaksa\n" "\t tavsiye edilmektedir.\n" "\n" "\n" "\t Bu çözümü seçmeden önce, lütfen Windows bölümünüzün eskisinden daha " "küçük\n" "\t kalacağını anlayın. Bu, windows'da verilerinizi saklamak ve yeni " "uygulamalar\n" "\t yüklemek için daha az boş alana sahip olacağınız anlamına gelmektedir.\n" "\n" "\n" "\t* Uzman Kipi: Sabit diskiniz kendiniz elle bölümlendirmek istiyorsanız " "bunu\n" "\t seçebilirsiniz. Bu çözümü seçmeden önce dikkatli olun. Güçlü bir çözüm\n" "\t olduğu kadar tehlikelidir de. Tüm verilerinizi kolayca " "kaybedebilirsiniz.\n" "\t Bu nedenle ne yaptığınızı tam olarak bilmediğiniz sürece bunu seçmeyin." #: ../../help.pm_.c:160 #, fuzzy msgid "" "At this point, you need to choose what\n" "partition(s) to use to install your new Linux-Mandrake system. If " "partitions\n" "have been already defined (from a previous installation of GNU/Linux or " "from\n" "another partitioning tool), you can use existing partitions. In other " "cases,\n" "hard drive partitions must be defined.\n" "\n" "\n" "To create partitions, you must first select a hard drive. You can select " "the\n" "disk for partitioning by clicking on \"hda\" for the first IDE drive, " "\"hdb\" for\n" "the second or \"sda\" for the first SCSI drive and so on.\n" "\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * Clear all: this option deletes all partitions available on the selected " "hard drive.\n" "\n" "\n" " * Auto allocate: this option allows you to automatically create Ext2 and " "swap partitions in free space of your\n" " hard drive.\n" "\n" "\n" " * Rescue partition table: if your partition table is damaged, you can try " "to recover it using this option. Please\n" " be careful and remember that it can fail.\n" "\n" "\n" " * Undo: you can use this option to cancel your changes.\n" "\n" "\n" " * Reload: you can use this option if you wish to undo all changes and " "load your initial partitions table\n" "\n" "\n" " * Wizard: If you wish to use a wizard to partition your hard drive, you " "can use this option. It is recommended if\n" " you do not have a good knowledge in partitioning.\n" "\n" "\n" " * Restore from floppy: if you have saved your partition table on a floppy " "during a previous installation, you can\n" " recover it using this option.\n" "\n" "\n" " * Save on floppy: if you wish to save your partition table on a floppy to " "be able to recover it, you can use this\n" " option. It is strongly recommended to use this option\n" "\n" "\n" " * Done: when you have finished partitioning your hard drive, use this " "option to save your changes.\n" "\n" "\n" "For information, you can reach any option using the keyboard: navigate " "trough the partitions using Tab and Up/Down arrows.\n" "\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when a empty partition is " "selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" " \n" "\n" " \n" "If you are installing on a PPC Machine, you will want to create a small HFS " "'bootstrap' partition of at least 1MB for use\n" "by the yaboot bootloader. If you opt to make the partition a bit larger, say " "50MB, you may find it a useful place to store \n" "a spare kernel and ramdisk image for emergency boot situations." msgstr "" "Bu noktada, Linux-Mandrake işletim sisteminizi sabit diskinizde\n" "nereye kuracağınızı seçmeniz gerekiyor.Bölümler önceki bir kurulum\n" "ya da bir başka bölümlendirme aracından dolayı önceden tanımlıysa\n" "eski bölümlerinizi kullanabilirsiniz. Diğer durumlarda, sabit disk\n" "bölümlerinin tanımlanması gerekir.\n" "\n" "\n" "Bölümleri oluşturmak için bir sabit disk seçmelisiniz. \"hda\"'ya " "klikleyerek\n" "ilk, \"hdb\"'ye klikleyerek ikinci IDE sürücüsünü, ya da \"sda\"'ya " "klikleyerek\n" "birinci SCSI sürücüsünü bölümlendirmek için seçebilirsiniz.\n" "\n" "\n" "Seçili sürücüyü bölümlendirmek için, aşağıdaki seçenekleri " "kullanabilirsiniz:\n" "\n" " * Tümünü temizle: Bu seçenek seçili sürücüdeki tüm bölümleri silecektir.\n" "\n" "\n" " * Otomatik bölümlendir: Bu seçenek sabit diskinizdeki boş alanda otomatik " "olarak\n" "ext2 ve takas bölümleri tanımlanmasını sağlayacaktır.\n" "\n" "\n" " * Bölümlendirme tablosunu kurtar: Bölümlendirme tablosu hasar gördüyse " "bu\n" "seçeneği kullanarak onu kurtarabilirsiniz. Lütfen dikkatli olun ve " "başarısız\n" "olma ihtimali olduğunu hatırlayın.\n" "\n" "\n" " * Geri al: Bu seçeneği kullanarak, daha önce yaptığınız değişikliklerden\n" "vazgeçebilirsiniz.\n" "\n" "\n" " * Tekrar yükle: Bu seçeneği kullanarak, yaptığınız tüm değişiklikleri " "geri\n" "alıp eski bölümlendirme tablosunu yükleyebilirsiniz.\n" "\n" "\n" " * Sihirbaz: Sabit diskinizi bölümlendirme işlemi için sihirbazı " "kullanmak\n" "isterseniz, bu seçeneği kullanabilirsiniz. Bölümlendirme hakkında fazla bir\n" "bilgiye sahip değilseniz bu seçeneği kullanmanızı öneririz.\n" "\n" "\n" " * Disketten geri çağır: Önceki bir kurulumda bölümlendirme tablonuzu bir\n" "diskete kaydettiyseniz, bu seçeneği kullanarak onu geri çağırabilirsiniz.\n" "\n" "\n" " * Diskete kaydet: Bölümlendirme tablonuzu diskete kaydetmek isterseniz " "bu\n" "seçeneği kullanın. İleride geri çağırmak isteme ihtimaliniz nedeniyle bu " "seçeneği\n" "şiddetle öneririz.\n" "\n" "\n" " * Bitti: Sabit diskinizi bölümlendirme işlemi bittiğinde " "değişikliklerinizin\n" "kaydedilebilmesi için bu seçeneği kullanın.\n" "\n" "\n" "Klavyeyi kullanarak herhangi bir seçeneğe gidebilirsiniz: Bölümler\n" "arasında gezinmek için Tab ve Yukarı/Aşağı ok tuşlarını kullanabilirsiniz.\n" "\n" "\n" "Bir bölüm seçildiğinde, aşağıdaki tuşları kullanabilirsiniz:\n" "\n" " * yeni bir bölüm oluşturmak için (boş bir bölüm seçildiğinde) " "Ctrl-c,\n" "\n" " * bir bölümü silmek için Ctrl-d,\n" "\n" " * ekleme noktasını atamak için Ctrl-m" #: ../../help.pm_.c:224 msgid "" "Above are listed the existing Linux partitions detected on\n" "your hard drive. You can keep choices make by the wizard, they are good for " "a\n" "common usage. If you change these choices, you must at least define a root\n" "partition (\"/\"). Don't choose a too little partition or you will not be " "able\n" "to install enough software. If you want store your data on a separate " "partition,\n" "you need also to choose a \"/home\" (only possible if you have more than " "one\n" "Linux partition available).\n" "\n" "\n" "For information, each partition is listed as follows: \"Name\", " "\"Capacity\".\n" "\n" "\n" "\"Name\" is coded as follow: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and " "\"sd\"\n" "if it is an SCSI hard drive.\n" "\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE " "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\",\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\",\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\",\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "\n" "With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means " "\"secondary hard drive\", etc..." msgstr "" "Yukarıdakiler, sabit diskinizde bulunan Linux bölümleridir. Genel kullanım " "için\n" "sihirbazın sunduğu seçenekleri değiştirmeden bırakabilirsiniz. Seçenekleri \n" "değiştirirseniz, en azından bir kök dizini (\"/\") tanımlamak zorundasınız.\n" "Lütfen çok küçük bir bölüm seçmeyin, istediğiniz tüm uygulamaları " "kurabilmek\n" "için yeterli yer bulamayabilirsiniz. Verilerinizi ayrı bir bölümde saklamak\n" "isterseniz, ayrıca bir \"/home\" bölümü tanımlamanız gerekecektir. (Birden\n" "fazla Linux bölümü tanımlıysa bu işlem gerçekleşebilir.)\n" "\n" "\n" "Her bir bölüm şöyle listelenmiştir: \"İsim\", \"Sığa\".\n" "\n" "\n" "\"İsim\" şöyle kodlanmıştır: \"sabit disk türü\", \"sabit disk numarası\"\n" "\"bölüm numarası\" (örneğin \"hda1\").\n" "\n" "\n" "\"Sabit disk türü\", diskiniz bir IDE sürücüsüyse \"hd\", bir SCSI " "sürücüsüyse\n" "\"sd\"'dir.\n" "\n" "\n" "\"Sabit disk numarası\" her zaman \"hd\" ya da \"sd\"'den sonra gelir. IDE\n" "sürücüleri için:\n" "\n" " * \"a\" \"birincil IDE denetleyicisindeki master sabit disk \",\n" "\n" " * \"b\" means \"birincil IDE denetleyicisindeki slave sabit disk \",\n" "\n" " * \"c\" means \"ikincil IDE denetleyicisindeki master sabit disk \",\n" "\n" " * \"d\" means \"ikincil IDE denetleyicisindeki slave sabit disk \",\n" "\n" "\n" "SCSI sürücüleri için \"a\" \"birincil sabit disk\", \"b\" \"ikincil sabit \n" "disk\" ... anlamına gelir." #: ../../help.pm_.c:258 msgid "" "Choose the hard drive you want to erase to install your\n" "new Linux-Mandrake partition. Be careful, all data present on it will be " "lost\n" "and will not be recoverable." msgstr "" "Lütfen yeni Linux-Mandrake disk bölümünüzü kurmak için silmek istediğiniz\n" "sabit diski seçin. Dikkatli olun, üzerindeki tüm veriler yok olacaktır ve\n" "geriye dönüş mümkün olmayacaktır." #: ../../help.pm_.c:263 msgid "" "Click on \"OK\" if you want to delete all data and\n" "partitions present on this hard drive. Be careful, after clicking on \"OK\", " "you\n" "will not be able to recover any data and partitions present on this hard " "drive,\n" "including any Windows data.\n" "\n" "\n" "Click on \"Cancel\" to cancel this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" "Bu sabit disk üzerindeki tüm verinin ve bölümlerin silinmesini istiyorsanız\n" "\"Tamam\"'a tıklayın. Dikkatli olun, tıkladıktan sonra Windows verileri de\n" "dahil hiçbir veri kurtarılamayacaktır.\n" "\n" "Sabit diskinizdeki hiçbir veriyi ya da bölümü silmeden bu işlemden " "vazgeçmek\n" "istiyorsanız lütfen \"Vazgeç\"'i klikleyin." #: ../../help.pm_.c:273 msgid "" "More than one Microsoft Windows partition have been\n" "detected on your hard drive. Please choose the one you want resize to " "install\n" "your new Linux-Mandrake operating system.\n" "\n" "\n" "For information, each partition is listed as follow; \"Linux name\", " "\"Windows\n" "name\" \"Capacity\".\n" "\n" "\"Linux name\" is coded as follow: \"hard drive type\", \"hard drive " "number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and " "\"sd\"\n" "if it is an SCSI hard drive.\n" "\n" "\n" "\"Hard drive number\" is always a letter putted after \"hd\" or \"sd\". With " "IDE hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\",\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\",\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\",\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means " "\"secondary hard drive\", etc.\n" "\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first " "disk\n" "or partition is called \"C:\")." msgstr "" "Sabit diskinizde birden fazla Windows bölümü bulundu. Yeni Linux-Mandrake\n" "işletim sisteminizi kurmak için hangi bölümün boyutunu değiştirmek " "istiyorsunuz?\n" "\n" "\n" "Her bir bölüm şöyle listelenmiştir; \"Linux adı\", \"Windows adı\", " "\"Sığa\".\n" "\n" "\"Linux adı\" şöyle kodlanır: \"sabit disk türü\", \"sabit disk numarası\", " "\n" "\"bölüm numarası\" (örneğin \"hda1\").\n" "\n" "\n" "\"Sabit disk türü\", diskiniz bir IDE sürücüsüyse \"hd\", bir SCSI " "sürücüsüyse\n" "\"sd\"'dir.\n" "\n" "\n" "\"Sabit disk numarası\" her zaman \"hd\" ya da \"sd\"'den sonra gelir. IDE\n" "sürücüleri için:\n" "\n" " * \"a\" \"birincil IDE denetleyicisindeki master sabit disk \",\n" "\n" " * \"b\" means \"birincil IDE denetleyicisindeki slave sabit disk \",\n" "\n" " * \"c\" means \"ikincil IDE denetleyicisindeki master sabit disk \",\n" "\n" " * \"d\" means \"ikincil IDE denetleyicisindeki slave sabit disk \",\n" "\n" "\n" "SCSI sürücüleri için \"a\" \"birincil sabit disk\", \"b\" \"ikincil sabit \n" "disk\" ... anlamına gelir.\n" "\n" "\"Windows adı\" ise diskinizin windows altındayken kullandığı sürücü " "harfidir.\n" "(Örneğin ilk disk ya da bölüm \"C:\"'dir." #: ../../help.pm_.c:306 msgid "Please be patient. This operation can take several minutes." msgstr "Lütfen bekleyin. Bu işlem birkaç dakika sürecektir." #: ../../help.pm_.c:309 msgid "" "Any partitions that have been newly defined must be\n" "formatted for use (formatting meaning creating a filesystem).\n" "\n" "\n" "At this time, you may wish to reformat some already existing partitions to " "erase\n" "the data they contain. If you wish do that, please also select the " "partitions\n" "you want to format.\n" "\n" "\n" "Please note that it is not necessary to reformat all pre-existing " "partitions.\n" "You must reformat the partitions containing the operating system (such as " "\"/\",\n" "\"/usr\" or \"/var\") but do you no have to reformat partitions containing " "data\n" "that you wish to keep (typically /home).\n" "\n" "\n" "Please be careful selecting partitions, after formatting, all data will be\n" "deleted and you will not be able to recover any of them.\n" "\n" "\n" "Click on \"OK\" when you are ready to format partitions.\n" "\n" "\n" "Click on \"Cancel\" if you want to choose other partitions to install your " "new\n" "Linux-Mandrake operating system." msgstr "" "Yeni tanımlanmış her bölüm, kullanım için biçimlendirilmelidir. " "(Biçimlendirmek\n" "bir dosya sistemi oluşturmak anlamına gelir.)\n" "\n" "\n" "Şimdi, halihazırda bulunan bölümlerinizdeki verileri silmek için onları " "tekrar\n" "biçimlendirmek isteyebilirsiniz. Bunu istiyorsanız, biçimlendirmek " "istediğiniz\n" "bu bölümleri de ayrıca seçili duruma getirin.\n" "\n" "\n" "Eskiden kalma tüm bölümlerin biçimlendirilmesi gerekmediğini lütfen " "unutmayın.\n" "İşletim sistemi içeren (örneğin \"/\", \"/usr\" ya da \"/var\" gibi) " "bölümlendirmeniz\n" "gereklidir, ama sadece verilerinizin bulunduğu bölümleri " "biçimlendirmeyebilirsiniz.\n" "(örneğin \"/home\".)\n" "\n" "\n" "Biçimlendireceğiniz bölümleri seçerken dikkatli olun, içlerindeki tüm veri " "yok\n" "olacaktır ve biçimlendirildikten sonra geri dönülmesi mümkün değildir.\n" "\n" "\n" "Bölümleri biçimlendirmeye hazır olduğunuzda \"Tamam\"'a tıklayın.\n" "\n" "\n" "Linux-Mandrake sisteminizi kurmak isteyeceğiniz başka bölümler de seçmek " "isterseniz\n" "\"Vazgeç\"'e basın." #: ../../help.pm_.c:335 msgid "" "You may now select the group of packages you wish to\n" "install or upgrade.\n" "\n" "\n" "DrakX will then check whether you have enough room to install them all. If " "not,\n" "it will warn you about it. If you want to go on anyway, it will proceed onto " "the\n" "installation of all selected groups but will drop some packages of lesser\n" "interest. At the bottom of the list you can select the option \n" "\"Individual package selection\"; in this case you will have to browse " "through\n" "more than 1000 packages..." msgstr "" "Şimdi kurmak ya da güncellemek istediğiniz paketler grubunu\n" "seçebilirsiniz.\n" "\n" "\n" "Sonra DrakX seçtiklerinizi kurmak ya da güncellemek için yeterli \n" "boş yerinizin olup olmadığını kontrol edecek. Eğer yoksa, size bunu \n" "söyleyecek. Ne olursa olsun devam etmek isterseniz, seçili grupların\n" "kurulumuna başlayacak, fakat bazı önemsiz paketleri atlayacak. En \n" "aşağıdaki \"Tek tek paket seçimi\" seçeneğini işaretleyebilirsiniz; bu\n" "durumda 1000'e yakın paket arasından seçim yapmanız gerekecektir..." #: ../../help.pm_.c:347 msgid "" "You can now choose individually all the packages you\n" "wish to install.\n" "\n" "\n" "You can expand or collapse the tree by clicking on options in the left " "corner of\n" "the packages window.\n" "\n" "\n" "If you prefer to see packages sorted in alphabetic order, click on the icon\n" "\"Toggle flat and group sorted\".\n" "\n" "\n" "If you want not to be warned on dependencies, click on \"Automatic\n" "dependencies\". If you do this, note that unselecting one package may " "silently\n" "unselect several other packages which depend on it." msgstr "" "Kurmak istediğiniz paketleri tek tek seçebilirsiniz.\n" "\n" "\n" "Paketler penceresinin sol köşesindeki seçeneklere tıklayarak ağacı açıp\n" "kapatabilirsiniz.\n" "\n" "\n" "Paketlerin alfabetik olarak sıralanmasını isterseniz, \"Düzgün bağla ve " "sıralı\n" "grupla\" simgesine tıklamalısınız.\n" "\n" "\n" "Bağımlılıklarda uyarılmak istemiyorsanız, \"Otomatik bağımlılık\"'a " "tıklayın.\n" "Bunu yaparsanız, bir paketi bırakmak, o pakete bağımlı birçok başka paketten " "de\n" "sessizce vazgeçilmesine neden olabilir." #: ../../help.pm_.c:364 msgid "" "If you have all the CDs in the list above, click Ok. If you have\n" "none of those CDs, click Cancel. If only some CDs are missing, unselect " "them,\n" "then click Ok." msgstr "" "Yukarıdaki listedeki tüm CD'lere sahipseniz, Tamam'ı tıklayın.\n" "Bu CD'lerin hiçbirine sahip değilseniz, Vazgeç'i tıklayın.\n" "CD'lerden sadece bazıları eksikse, bunları listeden çıkarıp\n" "Tamam'ı tıklayın." #: ../../help.pm_.c:369 msgid "" "Your new Linux-Mandrake operating system is currently being\n" "installed. This operation should take a few minutes (it depends on size you\n" "choose to install and the speed of your computer).\n" "\n" "\n" "Please be patient." msgstr "" "Yeni Linux-Mandrake işletim sisteminiz şu anda kuruluyor. Bu işlem\n" "birkaç dakika sürecektir. (Bu süre, seçtiğiniz kurulumun büyüklüğüne\n" "ve bilgisayarınızın hızına bağlıdır.)\n" "\n" "\n" "Lütfen bekleyin." #: ../../help.pm_.c:377 msgid "" "You can now test your mouse. Use buttons and wheel to verify\n" "if settings are good. If not, you can click on \"Cancel\" to choose another\n" "driver." msgstr "" "Şimdi farenizi deneyebilirsiniz. Ayarların düzgün olup olmadığını anlamak\n" "için lütfen düğmeleri ve tekeri kullanın. Ayarlar düzgün değilse " "\"Vazgeç\"'e\n" "basarak başka bir sürücü seçin." #: ../../help.pm_.c:382 msgid "" "Please select the correct port. For example, the COM1\n" "port under MS Windows is named ttyS0 under GNU/Linux." msgstr "" "Lütfen doğru kapıyı seçiniz. Örneğin, MS Windows'taki\n" "COM1'in karşılığı GNU/Linux'ta ttyS0'dır." #: ../../help.pm_.c:386 msgid "" "If you wish to connect your computer to the Internet or\n" "to a local network please choose the correct option. Please turn on your " "device\n" "before choosing the correct option to let DrakX detect it automatically.\n" "\n" "\n" "If you do not have any connection to the Internet or a local network, " "choose\n" "\"Disable networking\".\n" "\n" "\n" "If you wish to configure the network later after installation or if you " "have\n" "finished to configure your network connection, choose \"Done\"." msgstr "" "Bilgisayarınızı internete ya da yerel bir ağa bağlamak istiyorsanız lütfen\n" "uygun bir seçeneği işaretleyin. Seçeneği işaretlemeden önce DrakX'in " "bağlanmanıza\n" "yarayacak aygıtı otomatik olarak bulmasını sağlamak için o aygıtı açmayı " "unutmayın.\n" "\n" "\n" "İnternete ya da yerel bir ağa bağlanmak istemiyorsanız lütfen \"Ağı iptal " "et\"'i\n" "seçin.\n" "\n" "\n" "Ağınızı kurulumdan sonra ayarlamak istiyorsanız, ya da ağ bağlantısı " "ayarlarını\n" "bitirdiyseniz lütfen \"Bitti\"'ye basın." #: ../../help.pm_.c:399 msgid "" "No modem has been detected. Please select the serial port on which it is " "plugged.\n" "\n" "\n" "For information, the first serial port (called \"COM1\" under Microsoft\n" "Windows) is called \"ttyS0\" under Linux." msgstr "" "Modem bulunamadı. Lütfen modemin bağlı bulunduğu kapıyı seçin.\n" "\n" "\n" "İlk seri kapı (Windows altında \"COM1\") Linux altında \"ttyS0\"'dır." #: ../../help.pm_.c:406 msgid "" "You may now enter dialup options. If you don't know\n" "or are not sure what to enter, the correct informations can be obtained " "from\n" "your Internet Service Provider. If you do not enter the DNS (name server)\n" "information here, this information will be obtained from your Internet " "Service\n" "Provider at connection time." msgstr "" "Çevirmeli ağ seçeneklerini girebilirsiniz. Bu seçenekleri bilmiyorsanız,\n" "ya da emin değilseniz, doğru bilgileri İnternet servis sağlayıcınızdan\n" "edinebilirsiniz. DNS (alan adı sunucusu) bilgilerini şu anda girmezseniz,\n" "bu bilgiler bağlantı sırasında servis sağlayıcınızdan alınacaktır." #: ../../help.pm_.c:413 msgid "" "If your modem is an external modem, please turn on it now to let DrakX " "detect it automatically." msgstr "" "Modeminiz dışsal bir modem, DrakX'in onu otomatik olarak bulması için lütfen " "açın." #: ../../help.pm_.c:416 msgid "Please turn on your modem and choose the correct one." msgstr "Lütfen modeminizi açın ve doğru olan seçeneğe klikleyin." #: ../../help.pm_.c:419 msgid "" "If you are not sure if informations above are\n" "correct or if you don't know or are not sure what to enter, the correct\n" "informations can be obtained from your Internet Service Provider. If you do " "not\n" "enter the DNS (name server) information here, this information will be " "obtained\n" "from your Internet Service Provider at connection time." msgstr "" "Yukarıdaki bilgilerin doğruluğundan emin değilseniz, ya da gireceğiniz " "bilgileri\n" "bilmiyorsanız, doğru bilgileri internet servis sağlayıcınızdan " "edinebilirsiniz.\n" "DNS (alan adı sunucusu) bilgilerini şimdi girmezseniz, bağlantı sırasında " "bunlar\n" "servis sağlayıcınızdan alınacaktır." #: ../../help.pm_.c:426 msgid "" "You may now enter your host name if needed. If you\n" "don't know or are not sure what to enter, the correct informations can be\n" "obtained from your Internet Service Provider." msgstr "" "Gerekli olduğu takdirde sunucu ismini girebilirsiniz. Eğer gireceğiniz " "isimden emin\n" "değilseniz internet servis sağlayıcınıza başvurarak doğru bilgileri " "alabilirsiniz." #: ../../help.pm_.c:431 msgid "" "You may now configure your network device.\n" "\n" " * IP address: if you don't know or are not sure what to enter, ask your " "network administrator.\n" " You should not enter an IP address if you select the option \"Automatic " "IP\" below.\n" "\n" " * Netmask: \"255.255.255.0\" is generally a good choice. If you don't " "know or are not sure what to enter,\n" " ask your network administrator.\n" "\n" " * Automatic IP: if your network uses BOOTP or DHCP protocol, select this " "option. If selected, no value is needed in\n" " \"IP address\". If you don't know or are not sure if you need to select " "this option, ask your network administrator." msgstr "" "Şimdi ağ kartınızı yapılandırabilirsiniz:\n" "\n" " * IP adresi: Eğer IP adresinizi bilmiyorsanız ya da emin değilseniz,\n" " ağ yöneticinize danışın. \"Otomatik IP\" seçeneğini işaretlerseniz bir\n" " IP adresi girmemeniz gerekmektedir.\n" "\n" " * Ağ maskesi: Genellikle \"255.255.255.0\" iyi bir seçimdir. Eğer emin \n" "değilseniz, yine ağ yöneticinize ya da servis sağlayıcınıza sorun.\n" "\n" "\n" " * Otomatik IP : Eğer ağınız BOOTP ya da DHCP protokollerinden bir " "tanesini kullanıyorsa bu seçeneği işaretleyin. Bu seçenek işaretlenirse " "\"IP adresi\"\n" " için bir değer gerekmeyecektir. Emin değilseniz ağ yöneticinize " "başvurun." #: ../../help.pm_.c:443 msgid "" "You may now enter your host name if needed. If you\n" "don't know or are not sure what to enter, ask your network administrator." msgstr "" "Şimdi sunucu isminizi girebilirsiniz. Eğer gireceğiniz isim hakkında bir\n" "şüpheniz varsa ağ yöneticinizden bilgi alın." #: ../../help.pm_.c:447 msgid "" "You may now enter your host name if needed. If you\n" "don't know or are not sure what to enter, leave blank." msgstr "" "Eğer gerekliyse şimdi sunucu adını girebilirsiniz. Bilmiyor,\n" "ya da emin değilseniz boş bırakın." #: ../../help.pm_.c:451 msgid "" "You may now enter dialup options. If you're not sure what to enter, the\n" "correct information can be obtained from your ISP." msgstr "" "Şimdi çevirmeli ağ seçeneklerini girebilirsiniz. Eğer ne yazılması " "gerektiğini\n" "bilmiyorsanız İnternet servis sağlayıcınızdan gerekli bilgileri edinin." #: ../../help.pm_.c:455 msgid "" "If you will use proxies, please configure them now. If you don't know if\n" "you should use proxies, ask your network administrator or your ISP." msgstr "Eğer vekil (proxy) sunucu kullanılacaksa bunları girin." #: ../../help.pm_.c:459 msgid "" "You can install cryptographic package if your internet connection has been\n" "set up correctly. First choose a mirror where you wish to download packages " "and\n" "after that select the packages to install.\n" "\n" "\n" "Note you have to select mirror and cryptographic packages according\n" "to your legislation." msgstr "" "Eğer İnternet bağlantınız doğru şekilde ayarlanmışsa kriptografik paketi \n" "kurabilirsiniz. Önce paketleri indireceğiniz bir yansı adresi seçin,\n" "ve\n" "daha sonra kurulacak paketleri seçin.\n" "\n" "\n" "Unutmayın ki, ülkenizdeki kanunlara göre bir yansı ve kriptografik paketler " "kümesi\n" "seçmelisiniz." #: ../../help.pm_.c:468 msgid "You can now select your timezone according to where you live." msgstr "Şimdi, yaşadığınız yerin zaman dilimi ayarını seçebilirsiniz." #: ../../help.pm_.c:471 msgid "" "GNU/Linux manages time in GMT (Greenwich Manage\n" "Time) and translates it in local time according to the time zone you have\n" "selected.\n" "\n" "\n" "If you use Microsoft Windows on this computer, choose \"No\"." msgstr "" "GNU/Linux zamanı GMT'ye (Greenwich Mean Time) göre ayarlar ve bulunduğunuz \n" "bölgedeki zamana göre gerekli değişiklikleri yapar.\n" "\n" "Bu bilgisayarda Microsoft Windows kullanıyorsanız \"Hayır\"'ı seçin." #: ../../help.pm_.c:479 msgid "" "You may now choose which services you want to start at boot time.\n" "\n" "\n" "When your mouse comes over an item, a small balloon help will popup which\n" "describes the role of the service.\n" "\n" "\n" "Be very careful in this step if you intend to use your machine as a server: " "you\n" "will probably want not to start any services that you don't need. Please\n" "remember that several services can be dangerous if they are enable on a " "server.\n" "In general, select only the services that you really need." msgstr "" "Şimdi, açılış sırasında otomatik olarak başlamasını istediğiniz servisleri\n" "seçebilirsiniz.\n" "\n" "\n" "Fare bir maddenin üzerine geldiğinde o servisin rolünü açıklayan küçük bir\n" "baloncuk ortaya çıkacaktır.\n" "\n" "\n" "Eğer makinanızı bir sunucu olarak kullanacaksanız bu adımda dikkatli " "olmalısınız:\n" "Muhtemelen kullanmak istemediğiniz hiçbir servisi başlatmak istemezsiniz. " "Lütfen\n" "bir sunucuda açık duruma getirilen servislerin tehlikeli olabileceğini " "unutmayınız.\n" "Genel olarak, sadece ihtiyacınız olan servisleri seçmeye dikkat edin." #: ../../help.pm_.c:492 msgid "" "You can configure a local printer (connected to your computer) or remote\n" "printer (accessible via a Unix, Netware or Microsoft Windows network)." msgstr "" "Yerel bir yazıcı (bilgisayarınıza bağlı) ya da uzak bir yazıcı (bir Unix,\n" "Netware ya da Microsoft Windows ağıyla erişilebilen) ayarlayabilirsiniz." #: ../../help.pm_.c:496 msgid "" "If you wish to be able to print, please choose one printing system between\n" "CUPS and LPR.\n" "\n" "\n" "CUPS is a new, powerful and flexible printing system for Unix systems (CUPS\n" "means \"Common Unix Printing System\"). It is the default printing system " "in\n" "Linux-Mandrake.\n" "\n" "\n" "LPR is the old printing system used in previous Linux-Mandrake " "distributions.\n" "\n" "\n" "If you don't have printer, click on \"None\"." msgstr "" "Yazıcınızdan çıktı alabilmek için CUPS ve LPR adlı yazdırma sistemlerinden\n" "birini seçmeniz gerekiyor.\n" "\n" "\n" "CUPS, UNIX sistemler için, güçlü ve esnek olan yeni bir yazdırma " "sistemidir.\n" "(CUPS \"Ortak Unix Yazdırma Sistemi\" anlamına gelmektedir.) " "Linux-Mandrake'de\n" "öntanımlı olarak gelir.\n" "\n" "\n" "LPR ise eski Linux-Mandrake dağıtımlarında kullanınan eski yazdırma " "sistemidir.\n" "\n" "\n" "Bir yazıcınız yoksa lütfen \"Hiçbiri\"'ni tıklayın." #: ../../help.pm_.c:511 msgid "" "GNU/Linux can deal with many types of printer. Each of these types requires\n" "a different setup.\n" "\n" "\n" "If your printer is physically connected to your computer, select \"Local\n" "printer\".\n" "\n" "\n" "If you want to access a printer located on a remote Unix machine, select\n" "\"Remote printer\".\n" "\n" "\n" "If you want to access a printer located on a remote Microsoft Windows " "machine\n" "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"." msgstr "" "GNU/Linux çok çeşitli yazıcı türlerini çalıştırabilir. Bu türlerin her biri\n" "ayrı ayarlar gerektirir.\n" "\n" "\n" "Yazıcınız fiziksel olarak bilgisarınıza doğrudan bağlıysa \"Yerel " "yazıcı\"'yı\n" "seçin.\n" "\n" "\n" "Uzaktaki bir Unix makinasına bağlı bir yazıcıya erişmek için, \"Uzak " "yazıcı\"'yı\n" "seçin.\n" "\n" "\n" "Eğer uzaktaki bir Windows makinasına bağlı bir yazıcıya erişim sağlamak\n" "istiyorsanız (ya da SMB protokolünü kullanan bir Unix makinaya bağlı),\n" "lütfen \"SMB/Windows 95/98/NT\"'ye tıklayın." #: ../../help.pm_.c:527 msgid "" "Please turn on your printer before continuing to let DrakX detect it.\n" "\n" "You have to enter some informations here.\n" "\n" "\n" " * Name of printer: the print spooler uses \"lp\" as default printer name. " "So, you must have a printer named \"lp\".\n" " If you have only one printer, you can use several names for it. You " "just need to separate them by a pipe\n" " character (a \"|\"). So, if you prefer a more meaningful name, you have " "to put it first, eg: \"My printer|lp\".\n" " The printer having \"lp\" in its name(s) will be the default printer.\n" "\n" "\n" " * Description: this is optional but can be useful if several printers are " "connected to your computer or if you allow\n" " other computers to access to this printer.\n" "\n" "\n" " * Location: if you want to put some information on your\n" " printer location, put it here (you are free to write what\n" " you want, for example \"2nd floor\").\n" msgstr "" "Lütfen DrakX onu tanımaya çalışmadan önce yazıcınızı açın.\n" "\n" "Buraya bazı bilgiler girmeniz gerekiyor.\n" "\n" "\n" " * Yazıcının adı: Yazdırma sıralayıcısı öntanımlı yazıcı adı olarak\n" "\"lp\"'yi kullanır. Sadece bir tane yazıcıya sahip olsanız bile ona birçok " "isim\n" "verebilirsiniz. Ancak verdiğiniz isimleri \"|\" (boru) ile ayırmalısınız.\n" "Anlamlı bir isim seçerseniz onu önce yazın. Örneğin; \"Yazicim|lp\" gibi. " "İsimleri\n" "arasında \"lp\" adı olan yazıcı öntanımlı yazıcı olacktır.\n" "\n" "\n" " * Açıklama: Bu, seçenek isteğe bağlıdır. Ancak makinanıza birden çok " "yazıcı bağlıysa\n" "ya da başka bilgisayarın ağ üzerinden bu yazıcıya erişim yapabilmesine izin " "verecekseniz\n" "kullanışlı olabilir.\n" "\n" "\n" " * Konum: Yazıcınızın konumu hakkında bilgi girmek istiyorsanız, " "istediğiniz türde\n" "bilgiyi buraya yazabilirsiniz. Örneğin \"İkinci katta\" gibi.\n" #: ../../help.pm_.c:548 msgid "" "You need to enter some informations here.\n" "\n" "\n" " * Name of queue: the print spooler uses \"lp\" as default printer name. " "So, you need have a printer named \"lp\".\n" " If you have only one printer, you can use several names for it. You just " "need to separate them by a pipe\n" " character (a \"|\"). So, if you prefer to have a more meaningful name, " "you have to put it first, eg: \"My printer|lp\".\n" " The printer having \"lp\" in its name(s) will be the default printer.\n" "\n" " \n" " * Spool directory: it is in this directory that printing jobs are stored. " "Keep the default choice\n" " if you don't know what to use\n" "\n" "\n" " * Printer Connection: If your printer is physically connected to your " "computer, select \"Local printer\".\n" " If you want to access a printer located on a remote Unix machine, " "select \"Remote lpd printer\".\n" "\n" "\n" " If you want to access a printer located on a remote Microsoft Windows " "machine (or on Unix machine using SMB\n" " protocol), select \"SMB/Windows 95/98/NT\".\n" "\n" "\n" " If you want to acces a printer located on NetWare network, select " "\"NetWare\".\n" msgstr "" "Buraya bazı bilgiler girmeniz gerekiyor.\n" "\n" "\n" " * Kuyruğun ismi: yazıcı kuyruğu öntanımlı yazıcı adı olarak \"lp\"yi \n" "kullanır. Bu nedenle \"lp\" adında bir yazıcınız olmalıdır.\n" " Sadece bir yazıcıya sahipseniz, ona birden fazla isim de verebilirsiniz.\n" "Kullandığınız bu isimleri boru karakteri (\"|\") ile birbirinden ayırın.\n" "Daha anlamlı isiml tercih etmişseniz onu önce yazın: örneğin, " "\"Yazicim|lp\".\n" " \"lp\" adını alan yazıcı varsayılan yazıcı olarak kullanılacaktır.\n" "\n" "\n" " * Kuyruk dizini: yazdırma işleri bu dizinde saklanacaktır. Nereyi " "kullanacağınızı\n" "bilmiyorsanız öntanımlı seçeneği kullanın.\n" "\n" "\n" " * Yazıcı Bağlantısı: Bilgisayarınıza fiziksel olarak bağlanmış bir " "yazıcıya\n" "sahipseniz \"Yerel yazıcı\"yı seçin.\n" " Uzaktaki bir Unix makinesi üzerindeki bir yazıcıya erişim sağlamak için " "\"Uzaktaki\n" "lpd yazıcısı\"nı seçin.\n" "\n" "\n" " Uzaktaki bir Microsoft Windows makinasında (ya da SMB protokolünü " "kullanan bir\n" "Unix makinasında) bulunan bir yazıcıya erişmek için ise \"SMB/Windows " "95/98/NT\"yi\n" "seçin.\n" "\n" "\n" " Eğer bir Novell (NetWare) ağında bulunan bir yazıcıya erişmek " "istiyorsanız,\n" "\"NetWare\"i seçin.\n" #: ../../help.pm_.c:573 msgid "" "Your printer has not been detected. Please enter the name of the device on\n" "which it is connected.\n" "\n" "\n" "For information, most printers are connected on the first parallel port. " "This\n" "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft " "Windows." msgstr "" "Yazıcınız bulunamadı. Lütfen makinanıza bağlı aygıtın adını girin.\n" "\n" "\n" "Çoğu yazıcı, birinci paralel kapıya bağlıdır. Bu kapı GNU/Linux altında\n" "\"/dev/lp0\", ve Windows altında \"LPT1\"'dir." #: ../../help.pm_.c:581 msgid "You must now select your printer in the above list." msgstr "Şimdi yukarıdaki listeden yazıcınızı seçin." #: ../../help.pm_.c:584 msgid "" "Please select the right options according to your printer.\n" "Please see its documentation if you don't know what choose here.\n" "\n" "\n" "You will be able to test your configuration in next step and you will be " "able to modify it if it doesn't work as you want." msgstr "" "Lütfen yazıcınıza uygun seçenekleri işaretleyin.\n" "İşaretleyeceğiniz seçenekleri bilmiyorsanız lütfen yazıcınızın " "dokümanlarına\n" "başvurun.\n" "\n" "\n" "Bir sonraki adımda ayarlarınızı test edebilecek ve istediğiniz sonuçları\n" "alamazsanız yeniden düzenleyebilirsiniz." #: ../../help.pm_.c:591 msgid "" "You can now enter the root password for your Linux-Mandrake system.\n" "The password must be entered twice to verify that both password entries are " "identical.\n" "\n" "\n" "Root is the system's administrator and is the only user allowed to modify " "the\n" "system configuration. Therefore, choose this password carefully. \n" "Unauthorized use of the root account can be extemely dangerous to the " "integrity\n" "of the system, its data and other system connected to it.\n" "\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. It should never be written down.\n" "\n" "\n" "Do not make the password too long or complicated, though: you must be able " "to\n" "remember it without too much effort." msgstr "" "Linux sisteminiz için bir yönetici parolası verilmelidir. Bu parola\n" "yazım hatalarına meydan vermemesi ve emin olunması açısından iki kere\n" "girilmelidir.\n" "\n" "\n" "Bu parolayı dikkatli seçmelisiniz. Sadece yönetici parolasını bilen\n" "kişiler sistemi yönetebilir ve değişiklik yapabilir. Ayrıca yönetici\n" "parolası ile sisteme giren bir kişi tüm verileri silip, sisteme zarar\n" "verebilir. Seçtiğiniz parola alfanumerik karakterler içerip en az 8 karakter " "uzunluğunda olmalıdır. Herhangi bir kağıda, deftere not\n" "alınmamalıdır. Çok uzun bir parola veya çok karmaşık bir parola " "kullanılırsa\n" "parolanın hatırlanması zorlaşır.\n" "\n" "\n" "Yönetici olarak sisteme gireceğiniz zaman, giriş sırasında \"login\"\n" "yazan kısma \"root\" ve \"password\" yazan kısma yönetici parolasını\n" "yazmalısınız." #: ../../help.pm_.c:609 msgid "" "To enable a more secure system, you should select \"Use shadow file\" and\n" "\"Use MD5 passwords\"." msgstr "" "Daha güvenli bir sistem için \"Gölge parola kullan\" ve \"MD5 şifreleme \n" "kullan\" seçeneklerini işaretleyin." #: ../../help.pm_.c:613 msgid "" "If your network uses NIS, select \"Use NIS\". If you don't know, ask your\n" "network administrator." msgstr "" "Eğer ağda NIS kullanılıyorsa, \"NIS kullan\" seçeneğini işaretleyin. Eğer \n" "bilmiyorsanız sistem yöneticinize danışın." #: ../../help.pm_.c:617 msgid "" "You may now create one or more \"regular\" user account(s), as\n" "opposed to the \"privileged\" user account, root. You can create\n" "one or more account(s) for each person you want to allow to use\n" "the computer. Note that each user account will have its own\n" "preferences (graphical environment, program settings, etc.)\n" "and its own \"home directory\", in which these preferences are\n" "stored.\n" "\n" "\n" "First of all, create an account for yourself! Even if you will be the only " "user\n" "of the machine, you may NOT connect as root for daily use of the system: " "it's a\n" "very high security risk. Making the system unusable is very often a typo " "away.\n" "\n" "\n" "Therefore, you should connect to the system using the user account\n" "you will have created here, and login as root only for administration\n" "and maintenance purposes." msgstr "" "Şimdi bir ya da daha çok kişinin Linux sisteminizi kullanmasına izin\n" "verebilirsiniz. Her kullanıcı hesabı için yapılan değişiklikler sadece\n" "o kullanıcı ve kullanıcının \"kullanıcı dizini\" için geçerli olur.\n" "\n" "\n" "Sistemi sadece siz kullanacaksanız bile ayrı bir kullanıcı hesabı açarak\n" "normal işlemler için bu hesabı kullanmalısınız. Yönetici \"root\" hesabı\n" "günlük işlemlerde kullanılmamalıdır. Bu bir güvenlik riski teşkil eder.\n" "Normal bir kullanıcı hesabı ile çalışmak sizi ve sistemi size karşı\n" "korur. Yönetici hesabı olan \"root\" sadece, normal bir kullanıcı hesabı\n" "ile yapamayacağınız yönetim ve bakım işleri için kullanılmalıdır." #: ../../help.pm_.c:636 msgid "" "Creating a boot disk is strongly recommended. If you can't\n" "boot your computer, it's the only way to rescue your system without\n" "reinstalling it." msgstr "" "Bir açılış disketi oluşturmanız şiddetle önerilir. Sisteminiz açılmazsa\n" "bu disket sisteminizi tekrar kurmadan kurtarmanız için tek seçenektir." #: ../../help.pm_.c:641 msgid "" "You need to indicate where you wish\n" "to place the information required to boot to GNU/Linux.\n" "\n" "\n" "Unless you know exactly what you are doing, choose \"First sector of\n" "drive (MBR)\"." msgstr "" "GNU/Linux'u açmak için gereken bilgilerin nerde tutulacağını belirlemeniz\n" "gerekiyor.\n" "\n" "\n" "Ne yaptığınızdan emin değilseniz, \"Diskin ilk sektörü (MBR)\" seçin." #: ../../help.pm_.c:649 msgid "" "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n" " (primary master IDE disk) or \"/dev/sda\" (first SCSI disk)." msgstr "" "Başka bir şekilde belirtilmezse, genellikle bu seçim \"/dev/hda\" \n" "(Birincil master IDE disk) ya da \"/dev/sda\" (birinci SCSI disk)\n" "olacaktır." #: ../../help.pm_.c:653 msgid "" "LILO (the LInux LOader) and Grub are bootloaders: they are able to boot\n" "either GNU/Linux or any other operating system present on your computer.\n" "Normally, these other operating systems are correctly detected and\n" "installed. If this is not the case, you can add an entry by hand in this\n" "screen. Be careful as to choose the correct parameters.\n" "\n" "\n" "You may also want not to give access to these other operating systems to\n" "anyone, in which case you can delete the corresponding entries. But\n" "in this case, you will need a boot disk in order to boot them!" msgstr "" "LILO (Linux Yükleyici) ve Grub açılış yükleyicileridir: sistemi GNU/Linux\n" "ya da makinanızda bulunan başka bir işletim sistemiyle açabilirler.\n" "Normalde bu diğer işletim sistemleri doğru bir şekilde tespit edilip " "açılışa\n" "kurulabilirler. Eğer bir aksilik olursa, buradan elle eklenebilirler.\n" "Parametreler konusunda dikkatli olun." #: ../../help.pm_.c:665 #, fuzzy msgid "" "LILO and grub main options are:\n" " - Boot device: Sets the name of the device (e.g. a hard disk\n" "partition) that contains the boot sector. Unless you know specifically\n" "otherwise, choose \"/dev/hda\".\n" "\n" "\n" " - Delay before booting default image: Specifies the number in tenths\n" "of a second the boot loader should wait before booting the first image.\n" "This is useful on systems that immediately boot from the hard disk after\n" "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n" "omitted or is set to zero.\n" "\n" "\n" " - Video mode: This specifies the VGA text mode that should be selected\n" "when booting. The following values are available: \n" "\n" " * normal: select normal 80x25 text mode.\n" "\n" " * : use the corresponding text mode.\n" "\n" "\n" " - Clean \"/tmp\" at each boot: if you want delete all files and " "directories\n" "stored in \"/tmp\" when you boot your system, select this option.\n" "\n" "\n" " - Precise RAM if needed: unfortunately, there is no standard method to ask " "the\n" "BIOS about the amount of RAM present in your computer. As consequence, Linux " "may\n" "fail to detect your amount of RAM correctly. If this is the case, you can\n" "specify the correct amount or RAM here. Please note that a difference of 2 " "or 4\n" "MB between detected memory and memory present in your system is normal." msgstr "" "LILO ve grub ana seçenekleri şunlardır: \n" " - Açılış aygıtı: Açılış sektörünü bulunduğu sabit disk bölmesini içeren " "aygıtın\n" "adını tayin eder. Eğer hiçbir şey bilmiyorsanız \"/dev/hda\"yı seçin.\n" "\n" "\n" " - Varsayılan görüntüyle açmadan önce geçen süre: Açılış yükleyicisinin ilk " "\n" "görüntüyü açmadan önce bekleyeceği sürenin, saniyenin onda biri cinsinden\n" "miktarıdır. Bu, klavyenin etkinleşmesinden hemen sonra sabit diskten açılan\n" "sistemler için yararlıdır. Eğer \"bekleme süresi\" atlanırsa ya da sıfır\n" "değeri alırsa açılış yükleyicisi sistemi açmak için beklemez\n" "\n" "\n" " - Ekran kipi: Bu, açılışta kullanılacak VGA metin ekran kipini belirler.\n" "Aşağıdaki değerleri alabilir:\n" "\n" " * normal: 80x25 metin ekran kipi açılır.\n" " * : Karşılık gelen metin modunu kullanın." #: ../../help.pm_.c:697 msgid "" "Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able\n" "to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.\n" "Normally, these other operating systems are correctly detected and\n" "installed. If this is not the case, you can add an entry by hand in this\n" "screen. Be careful as to choose the correct parameters.\n" "\n" "\n" "Yaboot main options are:\n" "\n" "\n" " - Init Message: A simple text message that is displayed before the boot\n" "prompt.\n" "\n" "\n" " - Boot Device: Indicate where you want to place the information required " "to \n" "boot to GNU/Linux. Generally, you will have setup a bootstrap partition " "earlier \n" "to hold this information.\n" "\n" "\n" " - Open Firmware Delay: Unlike LILO, there are two delays available with \n" "yaboot. The first delay is measured in seconds and at this point you can \n" "choose between CD, OF boot, MacOS, or Linux.\n" "\n" "\n" " - Kernel Boot Timeout: This timeout is similar to the LILO boot delay. " "After \n" "selecting Linux, you will have this delay in 0.1 seconds before your " "default\n" "kernel description is selected.\n" "\n" "\n" " - Enable CD Boot?: Checking this option will allow you to choose 'C' for " "CD at\n" "the first boot prompt.\n" "\n" "\n" " - Enable OF Boot?: Checking this option will allow you to choose 'N' for " "Open\n" "Firmware at the first boot prompt.\n" "\n" "\n" " - Default OS: You can select which OS will boot by default when the Open " "Firmware \n" "Delay expires." msgstr "" #: ../../help.pm_.c:738 msgid "" "You can add additional entries for yaboot, either for other operating " "systems,\n" "alternate kernels, or for an emergency boot image.\n" "\n" "\n" "For other OS's - the entry consists only of a label and the root partition.\n" "\n" "\n" "For Linux, there are a few possible options: \n" "\n" "\n" " - Label: This is simply the name will type at the yaboot prompt to select " "this \n" "boot option.\n" "\n" "\n" " - Image: This would be the name of the kernel to boot. Typically vmlinux " "or\n" "a variation of vmlinux with an extension.\n" "\n" "\n" " - Root: The root device or '/' for your Linux installation.\n" "\n" "\n" " \n" " - Append: On Apple hardware, the kernel append option is used quite often " "to\n" "assist in initializing video hardware, or to enable keyboard mouse button " "emulation\n" "for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse. The " "following \n" "are some examples:\n" "\n" "\n" "\t\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 " "hda=autotune\n" "\n" "\t\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n" "\n" "\n" " \n" " - Initrd: This option can be used either to load initial modules, before " "the boot \n" "device is available, or to load a ramdisk image for an emergency boot " "situation.\n" "\n" "\n" " - Initrd-size: The default ramdisk size is generally 4096 bytes. If you " "should need\n" "to allocate a large ramdisk, this option can be used.\n" "\n" "\n" " - Read-write: Normally the 'root' partition is initially brought up " "read-only, to allow\n" "a filesystem check before the system becomes 'live'. You can override this " "option here.\n" "\n" "\n" " - NoVideo: Should the Apple video hardware prove to be exceptionally " "problematic, you can\n" "select this option to boot in 'novideo' mode, with native framebuffer " "support.\n" "\n" "\n" " - Default: Selects this entry as being the default Linux selection, " "selectable by just\n" "pressing ENTER at the yaboot prompt. This entry will also be highlighted " "with a '*', if you\n" "press TAB to see the boot selections." msgstr "" #: ../../help.pm_.c:793 msgid "" "SILO is a bootloader for SPARC: it is able to boot\n" "either GNU/Linux or any other operating system present on your computer.\n" "Normally, these other operating systems are correctly detected and\n" "installed. If this is not the case, you can add an entry by hand in this\n" "screen. Be careful as to choose the correct parameters.\n" "\n" "\n" "You may also want not to give access to these other operating systems to\n" "anyone, in which case you can delete the corresponding entries. But\n" "in this case, you will need a boot disk in order to boot them!" msgstr "" "SILO, SPARC'lar için bir açılış yükleyicidir: sistemi GNU/Linux'la ya da\n" "ya da makinanızda bulunan başka bir işletimiyle açabilir. Normalde bu diğer\n" "işletim sistemleri doğru bir şekilde tespit edilip açılışa kurulabilirler.\n" "Eğer bir aksilik olursa, buradan elle eklenebilirler.\n" "Parametreler konusunda dikkatli olun.\n" "Bu diğer işletim sistemlerini başkalarının kullanmasını istemeyebilirsiniz.\n" "Böyle bir durumda onlara karşılık gelen haneleri silebilirsiniz. Fakat o " "zaman\n" "makinanızı bu işletim sistemleriyle açabilmek için birer açma disketine\n" "ihtiyacınız olacaktır." #: ../../help.pm_.c:805 msgid "" "SILO main options are:\n" " - Bootloader installation: Indicate where you want to place the\n" "information required to boot to GNU/Linux. Unless you know exactly\n" "what you are doing, choose \"First sector of drive (MBR)\".\n" "\n" "\n" " - Delay before booting default image: Specifies the number in tenths\n" "of a second the boot loader should wait before booting the first image.\n" "This is useful on systems that immediately boot from the hard disk after\n" "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n" "omitted or is set to zero." msgstr "" "SILO ana seçenekleri şunlardır: \n" " - Açılışyükleyicisi kurulumu: GNU/Linux'u açmak için gerekli bilgiyi " "nerede\n" "tutmak istediğinizi gösterir. Ne yaptığınızı tam olarak bilmiyorsanız\n" "\"Sürücünün ilk sektörünu (MBR)\" seçin.\n" "\n" "\n" " - Varsayılan çekirdek görüntüsünün açılmasından önceki bekleme: Saniyenin\n" "onda biri olarak, açılış yükleyicisin ilk çekirdek görüntüsünü yüklemeden\n" "önce bekleyeceği süreyi belirler. klavyenin etkinleşmesinden hemen sonra " "sabit\n" "diskten açılan sistemler için yararlıdır. Eğer \"bekleme\" geçilir ya da " "sıfır\n" "değeri alırsa sistem yükleyicisi hiç beklemez.\n" "\n" "- Çizgisel: Bazı SCSI disklerde (nadiren) kullanılır.\n" "\n" "\n" " - Basit: Bir disketten açılış yaparken kullanılır, sistemin daha hızlı \n" "açılmasını sağlayabilir.\n" "\n" " - Açılışta gecikme süresi: Saniyenin onda biri olarak belirtilir ve LILO " "okunduktan\n" "sonra herhangi bir tuşa basılmadığı zaman öntanımlı açılacak olan sistemin\n" "bekleme süresini tayin eder.\n" "\n" " - Ekran kipi: Açılışta bir kaç metin ekran kipi seçilebilir:\n" " * normal: 80x25 metin ekran açılır.\n" " * : Belirtilen sayılara göre metin ekran çözünürlüğü ayarlanır." #: ../../help.pm_.c:818 msgid "" "Now it's time to configure the X Window System, which is the\n" "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n" "you must configure your video card and monitor. Most of these\n" "steps are automated, though, therefore your work may only consist\n" "of verifying what has been done and accept the settings :)\n" "\n" "\n" "When the configuration is over, X will be started (unless you\n" "ask DrakX not to) so that you can check and see if the\n" "settings suit you. If they don't, you can come back and\n" "change them, as many times as necessary." msgstr "" "Bu aşamadan itibaren, Linux GUI (Grafiksel Kullanıcı Arabirimi) çekirdeğini\n" "oluşturan X Window sistemini düzenleyeceğiz. Bu nedenle ekran kartınızı\n" "ve monitorünüzü ayarlamalısınız. Bu adımların çoğu zaten otomatik olarak\n" "yapılacak ve size sadece yapılanları incelemek ve ayarları kabul etmek\n" "düşecek. :-)\n" "\n" "\n" "Düzenlemeler bittiği anda eğer DrakX'e aksini belirtmediyseniz X Window \n" "başlayacaktır. Böylece yapılan ayarların isteklerinize uygun olup " "olmadığını\n" "kontrol edebileceksiniz. Eğer uygun değillerse istediğiniz kadar geri dönüp\n" "ayarları değiştirin." #: ../../help.pm_.c:831 msgid "" "If something is wrong in X configuration, use these options to correctly\n" "configure the X Window System." msgstr "X ayarlarında sorun yaşarsanız aşağıdaki seçenekleri kullanın." #: ../../help.pm_.c:835 msgid "" "If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n" "\"No\"." msgstr "" "Eğer sisteme giriş yaparken grafik arayüzünün gelmesini istiyorsanız " "\"Evet\",aksi halde \"Hayır\" tuşuna basın." #: ../../help.pm_.c:839 msgid "" "You can choose a security level for your system. Please refer to the manual " "for complete\n" " information. Basically, if you don't know what to choose, keep the default " "option.\n" msgstr "" #: ../../help.pm_.c:844 msgid "" "Your system is going to reboot.\n" "\n" "After rebooting, your new Linux Mandrake system will load automatically.\n" "If you want to boot into another existing operating system, please read\n" "the additional instructions." msgstr "" "Şimdi sistem tekrar açılacaktır.\n" "\n" "Açıldıktan sonra Linux Mandrake otomatik olarak yüklenecektir. Eğer başka \n" "bir işletim sistemi çalıştıracaksanız ek uyarıları okuyun." #: ../../install2.pm_.c:39 msgid "Choose your language" msgstr "Kullanacağınız dili seçin" #: ../../install2.pm_.c:40 msgid "Select installation class" msgstr "Kurulum sınıfını seçin" #: ../../install2.pm_.c:41 msgid "Hard drive detection" msgstr "Sabit disk seçimi" #: ../../install2.pm_.c:42 msgid "Configure mouse" msgstr "Fare ayarları" #: ../../install2.pm_.c:43 msgid "Choose your keyboard" msgstr "Klavyenizi seçin" #: ../../install2.pm_.c:44 #, fuzzy msgid "Security" msgstr "bukle" #: ../../install2.pm_.c:45 msgid "Setup filesystems" msgstr "Dosya sistemleri Ayarları" #: ../../install2.pm_.c:46 msgid "Format partitions" msgstr "Bölümleri biçimlendirme" #: ../../install2.pm_.c:47 msgid "Choose packages to install" msgstr "Kurulacak paketleri seçin" #: ../../install2.pm_.c:48 msgid "Install system" msgstr "Sistem kurulumu" #: ../../install2.pm_.c:49 ../../install_steps_interactive.pm_.c:894 #: ../../install_steps_interactive.pm_.c:895 msgid "Set root password" msgstr "Root parolasını düzenle" #: ../../install2.pm_.c:50 msgid "Add a user" msgstr "Kullanıcı ekle" #: ../../install2.pm_.c:51 msgid "Configure networking" msgstr "Ağ ayarları" #: ../../install2.pm_.c:53 ../../install_steps_interactive.pm_.c:818 msgid "Summary" msgstr "" #: ../../install2.pm_.c:54 msgid "Configure services" msgstr "Servis ayarları" #: ../../install2.pm_.c:56 msgid "Create a bootdisk" msgstr "Açılış disketi oluşturma" #: ../../install2.pm_.c:58 msgid "Install bootloader" msgstr "Sistem yükleyiciyi Kur" #: ../../install2.pm_.c:59 msgid "Configure X" msgstr "X'i Ayarla" #: ../../install2.pm_.c:60 msgid "Exit install" msgstr "Kurulumdan Çık" #: ../../install_any.pm_.c:373 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new could be found. In that case, you must make sure to " "upgrade\n" "as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" #: ../../install_any.pm_.c:404 msgid "Can't use broadcast with no NIS domain" msgstr "NIS alanı olmadan broadcast kullanamazsınız" #: ../../install_any.pm_.c:647 #, fuzzy, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "%s sürücüsüne bir disket takın" #: ../../install_any.pm_.c:651 msgid "This floppy is not FAT formatted" msgstr "" #: ../../install_any.pm_.c:661 msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" #: ../../install_any.pm_.c:683 msgid "Error reading file $f" msgstr "$f dosyası okunurken hata " #: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:310 #: ../../interactive.pm_.c:95 ../../interactive.pm_.c:110 #: ../../interactive.pm_.c:265 ../../interactive_newt.pm_.c:166 #: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:356 #: ../../my_gtk.pm_.c:616 ../../my_gtk.pm_.c:639 msgid "Ok" msgstr "Tamam" #: ../../install_gtk.pm_.c:423 msgid "Please test the mouse" msgstr "Lütfen farenizi test edin" #: ../../install_gtk.pm_.c:424 msgid "To activate the mouse," msgstr "Fareyi aktif hale getirmek için" #: ../../install_gtk.pm_.c:425 msgid "MOVE YOUR WHEEL!" msgstr "FARENİZİN TEKERİNİ HAREKET ETTİRİN!" #: ../../install_interactive.pm_.c:23 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "Bilgisayarınızdaki bazı donanımlar çalışmak için \"özgün\" sürücüler\n" "gerektiriyor. Bunlar hakkında bazı bilgiler bulabileceğiniz yer: %s" #: ../../install_interactive.pm_.c:41 msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Bir root disk bölümüne ihtiyacınız var.\n" "Bunun için ister mevcut bir disk bölümü üzerine tıklayın, \n" "isterseniz yeni bir tanesini baştan oluşturun. Daha sonra \"Bağlama \n" "Noktası\"na gelin ve burayı '/' olarak değiştirin." #: ../../install_interactive.pm_.c:46 ../../install_steps_graphical.pm_.c:259 msgid "You must have a swap partition" msgstr "Bir takas alanına ihtiyacınız var" #: ../../install_interactive.pm_.c:47 ../../install_steps_graphical.pm_.c:261 msgid "" "You don't have a swap partition\n" "\n" "Continue anyway?" msgstr "" "Bir takas alanınız yok\n" "Devam edeyim mi?" #: ../../install_interactive.pm_.c:68 msgid "Use free space" msgstr "Boş alanı kullan" #: ../../install_interactive.pm_.c:70 msgid "Not enough free space to allocate new partitions" msgstr "Yeni bölümler açmak için yeterli boş alan yok" #: ../../install_interactive.pm_.c:78 msgid "Use existing partition" msgstr "Hazırdaki bölümleri kullan" #: ../../install_interactive.pm_.c:80 msgid "There is no existing partition to use" msgstr "Hazırda bölüm bulunamadı" #: ../../install_interactive.pm_.c:87 msgid "Use the Windows partition for loopback" msgstr "Loopback için Windows bölümünü kullan" #: ../../install_interactive.pm_.c:90 msgid "Which partition do you want to use for Linux4Win?" msgstr "Linux4Win için hangi disk bölümünü kullanmak istiyorsunuz?" #: ../../install_interactive.pm_.c:92 msgid "Choose the sizes" msgstr "Boyutları seçin" #: ../../install_interactive.pm_.c:93 msgid "Root partition size in MB: " msgstr "Kök (root) bölümü boyutu (Mb): " #: ../../install_interactive.pm_.c:94 msgid "Swap partition size in MB: " msgstr "Takas alanı boyutu (Mb): " #: ../../install_interactive.pm_.c:102 msgid "Use the free space on the Windows partition" msgstr "Windows bölümündeki boş alanı kullan" #: ../../install_interactive.pm_.c:105 msgid "Which partition do you want to resize?" msgstr "Hangi bölümü yeniden boyutlandırmak istiyorsunuz?" #: ../../install_interactive.pm_.c:107 msgid "Computing Windows filesystem bounds" msgstr "Windows dosya sistemi sınırları hesaplanıyor" #: ../../install_interactive.pm_.c:110 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" "FAT yeniden boyutlandırıcısı bölümü boyutlandıramıyor,\n" "şu hata oluştu: %s" #: ../../install_interactive.pm_.c:113 msgid "Your Windows partition is too fragmented, please run ``defrag'' first" msgstr "" "Windows bölümünüz çok dağınık, lütfen önce \"disk birleştirme\" aracını " "kullanın" #: ../../install_interactive.pm_.c:114 msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this operation is\n" "dangerous. If you have not already done so, you should first exit the\n" "installation, run scandisk under Windows (and optionally run defrag), then\n" "restart the installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "UYARI!\n" "DrakX Windows disk bölümünüzü yeniden boyutlandıracaktır. Bu işlem\n" "tehlikeli olabilir. Daha önce yapmamışsanız kurulumdan çıkın ve Windows\n" "altında Scandisk (ve seçimli olarak defrag) programını çalıştırın. Ardından\n" "kuruluma tekrar devam edin. Verilerinizin yedeğini almayı da unutmayın!\n" "Emin olduğunuzda Tamam'a basın." #: ../../install_interactive.pm_.c:123 msgid "Which size do you want to keep for windows on" msgstr "Windows için ne kadar yer bırakmak istiyorsunuz?" #: ../../install_interactive.pm_.c:124 #, c-format msgid "partition %s" msgstr "(%s bölümünde)" #: ../../install_interactive.pm_.c:130 #, c-format msgid "FAT resizing failed: %s" msgstr "FAT yeniden boyutlandırması başarısız: %s" #: ../../install_interactive.pm_.c:145 msgid "" "There is no FAT partitions to resize or to use as loopback (or not enough " "space left)" msgstr "" "Yeniden boyutlandırılacak ya da loopback olarak kullanılacak \n" "hiç FAT bölümü yok (ya da boş alan kalmamış)" #: ../../install_interactive.pm_.c:151 msgid "Erase entire disk" msgstr "Tüm diski temizle" #: ../../install_interactive.pm_.c:151 msgid "Remove Windows(TM)" msgstr "Windows'u Sil" #: ../../install_interactive.pm_.c:154 msgid "You have more than one hard drive, which one do you install linux on?" msgstr "Birden çok sabit diskiniz var, hangisine linux kurmak istiyorsunuz?" #: ../../install_interactive.pm_.c:157 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "%s sürücüsü üzerindeki TÜM bölümler ve veriler silinecektir" #: ../../install_interactive.pm_.c:165 #, fuzzy msgid "Custom disk partitioning" msgstr "Hazırdaki bölümleri kullan" #: ../../install_interactive.pm_.c:169 msgid "Use fdisk" msgstr "Fdisk'i kullan" #: ../../install_interactive.pm_.c:172 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "Şimdi %s'i bölümlendirebilirsiniz.\n" "İşiniz bittiğinde `w'yi kullanarak değişiklikleri saklamayı unutmayın." #: ../../install_interactive.pm_.c:201 msgid "You don't have enough free space on your Windows partition" msgstr "Windows bölümünüzde yeterli boş yeriniz yok" #: ../../install_interactive.pm_.c:217 msgid "I can't find any room for installing" msgstr "Kurulum için boş yer bulamıyorum" #: ../../install_interactive.pm_.c:221 msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "DrakX Bölümlendirme sihirbazı şu çözümleri buldu:" #: ../../install_interactive.pm_.c:226 #, c-format msgid "Partitioning failed: %s" msgstr "Bölümlendirme başarısız: %s" #: ../../install_interactive.pm_.c:232 msgid "Bringing up the network" msgstr "Ağ ayarları etkinleştiriliyor" #: ../../install_interactive.pm_.c:237 msgid "Bringing down the network" msgstr "Ağ kapatılıyor" #: ../../install_steps.pm_.c:73 msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "Bir hata oluştu, fakat tam olarak nasıl düzeltileceğini bilmiyorum.\n" "Devam edebilirsiniz, risk size ait!" #: ../../install_steps.pm_.c:203 #, c-format msgid "Duplicate mount point %s" msgstr "%s bağlama noktasını çoğalt" #: ../../install_steps.pm_.c:385 msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl " "Mandrake/RPMS/*.rpm\"\n" msgstr "" "Bazı paketler doğru olarak kurulumu tamamlamadı.\n" "cdrom sürücünüz ya da cdromunuz düzgün çalışamaz durumda.\n" "Önceden Linux kurulu bir sistemde \"rpm -qpl Mandrake/RPMS/*.rpm\"'yi\n" "kullanarak Cd-Rom'u kontrol edin.\n" #: ../../install_steps.pm_.c:451 #, c-format msgid "Welcome to %s" msgstr "%s'e Hoş Geldiniz" #: ../../install_steps.pm_.c:634 msgid "No floppy drive available" msgstr "Disket sürücü yok" #: ../../install_steps_auto_install.pm_.c:51 #: ../../install_steps_stdio.pm_.c:23 #, c-format msgid "Entering step `%s'\n" msgstr "Başlangıç adımı `%s'\n" #: ../../install_steps_graphical.pm_.c:287 msgid "Choose the size you want to install" msgstr "Kurmak istediğiniz paketleri seçin" #: ../../install_steps_graphical.pm_.c:334 msgid "Total size: " msgstr "Toplam boyut: " #: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:437 #, c-format msgid "Version: %s\n" msgstr "Sürüm: %s\n" #: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:438 #, c-format msgid "Size: %d KB\n" msgstr "Boyut: %d KB\n" #: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:337 #: ../../install_steps_interactive.pm_.c:520 msgid "Choose the packages you want to install" msgstr "Kurmak istediğiniz paketleri seçin" #: ../../install_steps_graphical.pm_.c:465 ../../install_steps_gtk.pm_.c:340 msgid "Info" msgstr "Bilgi" #: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:345 #: ../../install_steps_interactive.pm_.c:226 msgid "Install" msgstr "Kurulum" #: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:558 #: ../../install_steps_interactive.pm_.c:675 msgid "Installing" msgstr "Kuruluyor" #: ../../install_steps_graphical.pm_.c:499 msgid "Please wait, " msgstr "Lütfen bekleyin, " #: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:570 msgid "Time remaining " msgstr "Kalan süre" #: ../../install_steps_graphical.pm_.c:502 msgid "Total time " msgstr "Toplam süre" #: ../../install_steps_graphical.pm_.c:507 #: ../../install_steps_interactive.pm_.c:675 msgid "Preparing installation" msgstr "Kurulum hazırlanıyor" #: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:618 #, c-format msgid "Installing package %s" msgstr "%s paketi kuruluyor" #: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:695 #: ../../install_steps_gtk.pm_.c:699 msgid "Go on anyway?" msgstr "Yine de devam edelim mi?" #: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:695 msgid "There was an error ordering packages:" msgstr "Paketleri düzenlerken bir hata oluştu:" #: ../../install_steps_graphical.pm_.c:577 msgid "Use existing configuration for X11?" msgstr "X11 ayarları için mevcut ayarları kullanalım mı?" #: ../../install_steps_gtk.pm_.c:142 msgid "" "Your system is low on resource. You may have some problem installing\n" "Linux-Mandrake. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "Sistem kaynaklarınız kısıtlı. Linux-Mandrake'yi kurarken sorunlarınız\n" "olabilir. Bu durum oluşursa, metin tabanlı kurulumu deneyebilirsiniz.\n" "Bunun için CDROM'dan açtıktan sonra `F1'e basın, ve komut satırına\n" "`text' yazın." #: ../../install_steps_gtk.pm_.c:156 msgid "Please, choose one of the following classes of installation:" msgstr "Lütfen aşağıdaki kurulum sınıflarından birisini seçiniz:" #: ../../install_steps_gtk.pm_.c:222 #, c-format msgid "" "The total size for the groups you have selected is approximately %d MB.\n" msgstr "Seçtiğiniz paket gruplarının toplam boyu aşağı yukarı %d MB.\n" #: ../../install_steps_gtk.pm_.c:224 msgid "" "If you wish to install less than this size,\n" "select the percentage of packages that you want to install.\n" "\n" "A low percentage will install only the most important packages;\n" "a percentage of 100%% will install all selected packages." msgstr "" "Bu boyuttan daha azını yüklemek isterseniz,\n" "kurmak istediğiniz paket yüzdesini seçin.\n" "100%%'ü seçerseniz bütün paketler kurulacaktır." #: ../../install_steps_gtk.pm_.c:229 msgid "" "You have space on your disk for only %d%% of these packages.\n" "\n" "If you wish to install less than this,\n" "select the percentage of packages that you want to install.\n" "A low percentage will install only the most important packages;\n" "a percentage of %d%% will install as many packages as possible." msgstr "" "Sabit diskinizde bu paketlerin sadece %d%%'sini kuracak kadar yer var.\n" "Bundan daha azını kurmak isterseniz,\n" "daha az bir yüzde sadece en önemli paketleri paketleri;\n" "%d%% ise kurulabilecek tüm paketleri kuracaktır." #: ../../install_steps_gtk.pm_.c:235 msgid "You will be able to choose them more specifically in the next step." msgstr "Sonraki adımda daha ayrıntılı bir seçim karşınıza gelecektir." #: ../../install_steps_gtk.pm_.c:237 msgid "Percentage of packages to install" msgstr "Kurulacak paketlerin yüzdesi" #: ../../install_steps_gtk.pm_.c:285 ../../install_steps_interactive.pm_.c:599 msgid "Package Group Selection" msgstr "Paket Grubu Seçimi" #: ../../install_steps_gtk.pm_.c:305 ../../install_steps_interactive.pm_.c:614 msgid "Individual package selection" msgstr "Tek tek paket seçimi" #: ../../install_steps_gtk.pm_.c:349 msgid "Show automatically selected packages" msgstr "" #: ../../install_steps_gtk.pm_.c:416 msgid "Expand Tree" msgstr "Ağacı Aç" #: ../../install_steps_gtk.pm_.c:417 msgid "Collapse Tree" msgstr "Ağacı Kapat" #: ../../install_steps_gtk.pm_.c:418 msgid "Toggle between flat and group sorted" msgstr "Birbirine bağla ve sıralı grupla" #: ../../install_steps_gtk.pm_.c:435 msgid "Bad package" msgstr "Hatalı paket" #: ../../install_steps_gtk.pm_.c:436 #, c-format msgid "Name: %s\n" msgstr "İsim: %s\n" #: ../../install_steps_gtk.pm_.c:439 #, c-format msgid "Importance: %s\n" msgstr "Önem seviyesi: %s\n" #: ../../install_steps_gtk.pm_.c:448 ../../install_steps_interactive.pm_.c:578 #, c-format msgid "Total size: %d / %d MB" msgstr "Toplam boyut: %d / %d Mb" #: ../../install_steps_gtk.pm_.c:467 msgid "" "You can't select this package as there is not enough space left to install it" msgstr "Bu paketi seçemezsiniz çünkü kurmak için yeterli yeriniz yok." #: ../../install_steps_gtk.pm_.c:471 msgid "The following packages are going to be installed" msgstr "Aşağıdaki paketler kurulacaktır" #: ../../install_steps_gtk.pm_.c:472 msgid "The following packages are going to be removed" msgstr "Aşağıdaki paketler sistemden silinecekler" #: ../../install_steps_gtk.pm_.c:482 msgid "You can't select/unselect this package" msgstr "Bu paketi seçemezsiniz/sistemden çıkaramazsınız" #: ../../install_steps_gtk.pm_.c:501 msgid "This is a mandatory package, it can't be unselected" msgstr "Bu gerekli bir pakettir, sistemden çıkarılamaz" #: ../../install_steps_gtk.pm_.c:503 msgid "You can't unselect this package. It is already installed" msgstr "Bu paketi sistemden çıkaramazsınız. Kurulu durumda." #: ../../install_steps_gtk.pm_.c:507 msgid "" "This package must be upgraded\n" "Are you sure you want to deselect it?" msgstr "" "Bu paket yenilenmek zorunda\n" "Sistemden çıkarmak için emin misiniz?" #: ../../install_steps_gtk.pm_.c:510 msgid "You can't unselect this package. It must be upgraded" msgstr "Bu paketi sistemden çıkaramazsınız. Yenilenmek zorunda" #: ../../install_steps_gtk.pm_.c:563 msgid "Estimating" msgstr "Tahmin ediliyor" #: ../../install_steps_gtk.pm_.c:582 #, fuzzy msgid "Please wait, preparing installation" msgstr "Kurulum hazırlanıyor" #: ../../install_steps_gtk.pm_.c:613 #, c-format msgid "%d packages" msgstr "%d paket" #: ../../install_steps_gtk.pm_.c:652 msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" "\n" "Uyarı\n" "Aşağıdaki maddeleri lütfen dikkatle okuyun. Herhangi birine\n" "katılmıyorsanız, bir sonraki CD ortamından kurulum yapmanız mümkün\n" "değildir. Bu ortamdan kurulum yapmadan devam edebilmek için 'Reddet'e\n" "basınız.\n" "\n" "\n" "Bir sonraki CD'deki bazı uygulamalar GPL Lisansı'na ya da benzer " "anlaşmalara\n" "tabi değildir. Her parça kendine ait bir lisansın şartları ve durumları\n" "tarafından yönlendirilir. Lütfen ilgili lisansı dikkatle okuyup kabul " "etmeden\n" "bu parçaların dağıtımını yapmayınız.\n" "Genel olarak bu tür lisanslar ilgili uygulamanın transferi, kopyalanması " "(yedekleme\n" "amacı dışında nedenlerle), dağıtımı, kodlarının incelenmesi ve " "değiştirilmesini\n" "engeller. Herhangi bir anlaşmazlık, ilgili lisans tarafından verilen " "haklarınızı yok\n" "eder. Özel bir lisans anlaşmasıyla hak sahibi olmadıysanız, ilgili parçaları " "birden\n" "fazla sisteme kuramaz, ağ ortamında çalışmaya adapte edemezsiniz. Herhangi " "bir\n" "şüphe durumunda doğrudan dağıtıcı, ya da uygulamanın yazarıyla iletişim " "kurunuz.\n" "Üçüncü şahıslara transfer ya da dokümanlar da dahil herhangi bir " "kopyalanması\n" "genel olarak mümkün değildir.\n" "\n" "\n" "Bir sonraki CD ortamındaki parçaların tüm hakları her bir uygulamanın kendi " "yazarına\n" "aittir, ve entellektüel özgünlük yasaları tarafından korunmaktadır.\n" #: ../../install_steps_gtk.pm_.c:680 ../../install_steps_interactive.pm_.c:163 msgid "Accept" msgstr "Kabul et" #: ../../install_steps_gtk.pm_.c:680 ../../install_steps_interactive.pm_.c:163 msgid "Refuse" msgstr "Reddet" #: ../../install_steps_gtk.pm_.c:681 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "Cd-Rom'u değiştirin!\n" "\n" "\"%s\" etiketli Cd-Rom'u sürücünüze takın ve TAMAM'a basın.\n" "Eğer Cd-Rom elinizde yoksa bu Cd-Rom'dan kurmamak için VAZGEÇ'e basın." #: ../../install_steps_gtk.pm_.c:699 msgid "There was an error installing packages:" msgstr "Paketler kurulurken bir hata oluştu:" #: ../../install_steps_interactive.pm_.c:37 msgid "An error occurred" msgstr "Bir hata oluştu" #: ../../install_steps_interactive.pm_.c:55 msgid "Please, choose a language to use." msgstr "Lütfen kullanmak üzere bir dil seçin." #: ../../install_steps_interactive.pm_.c:56 msgid "You can choose other languages that will be available after install" msgstr "Kurulumdan sonra kullanabileceğiniz başka diller seçebilirsiniz" #: ../../install_steps_interactive.pm_.c:68 #: ../../install_steps_interactive.pm_.c:613 msgid "All" msgstr "Tümü" #: ../../install_steps_interactive.pm_.c:86 msgid "License agreement" msgstr "Lisans anlaşması" #: ../../install_steps_interactive.pm_.c:87 msgid "" "Introduction\n" "\n" "The operating system and the different components available in the " "Linux-Mandrake distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Linux-Mandrake distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read carefully this document. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurance of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Linux-Mandrake sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Linux-Mandrake\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" "Giriş\n" "\n" "İşletim sistemi, ve Linux-Mandrake dağıtımında bulunan farklı parçalar " "buradan\n" "itibaren \"Yazılım Ürünleri\" olarak adlandırılacaktır. Yazılım ürünleri; " "işletim\n" "sistemiyle ilgili program kümeleri, yötemleri, kuralları ve dokümanları, " "Linux-\n" "Mandrake'nin farklı parçalarını içermektedir, fakat bunlarla " "sınırlandırılmamaktadır.\n" "\n" "\n" "1. Lisans Anlaşması\n" "\n" "Lütfen bu dokümanı dikkatle okuyun. Bu doküman yazılım ürünlerini uygulayan\n" "MandrakeSoft S.A. ile sizin aranızdaki lisans anlaşmasıdır. Yazılım " "ürünlerini,\n" "kurulum yaparak, çoğaltarak, ya da herhangi bir amaçla kullanarak bu " "Lisans'ın\n" "şartlarına uyacağınızı açık ve tam olarak kabul etmiş bulunuyorsunuz. Eğer " "bu\n" "Lisans'ın şartlarını kabul etmiyorsanız, yazılım ürünlerini kurma, çoğaltma " "ve\n" "kullanma hakkınız yoktur. Yazılım ürünlerini lisansın şartlarına uymayacak\n" "herhangi bir şekilde kurma, çoğaltma ya da kullanma teşebbüsü, bu lisans " "altındaki\n" "haklarınızı yok edecektir. Lisansın anlaşmasının bozulması durumunda, " "yazılım\n" "ürünlerinin tüm kopyalarını derhal yok etmeniz gerekmektedir.\n" "\n" "\n" "2. Sınırlı Garanti\n" "\n" "Yazılım Ürünleri ve yanlarında gelen dokümanlar \"oldukları gibi\"dirler, ve " "kanunların izin verdiği\n" "açılımda garantisizdirler. MandrakeSoft S.A., kullanıcının yazılım " "ürünlerini kullanmak konusunda yetkin\n" "olmaması nedeniyle oluşan (iş kaybı, işin aksaması, maddi kayıp, hukuki " "cezalara çarptırılma\n" "vb. neden olacak) doğrudan ya da dolaylı (MandrakeSoft S.A. bu tür " "zararların oluşabileceğini duyursa bile)\n" "hiçbir zarar nedeniyle sorumluluk taşımaz.\n" "\n" "BAZI ÜLKELERDE YASAKLANMIŞ YAZILIMA SAHİP OLMAYA YA DA ONU KULLANMAYA BAĞLI " "SINIRLI SORUMLULUK\n" "\n" "Kanunların verdiği yetkilere göre, MandrakeSoft S.A. ya da dağıtımcıları " "kullanıcının, bulunduğu ülkede yasak olduğu halde, yazılım " "ürünlerinikullanması, onlara sahip olması, onları Linux-Mandrake " "sitelerinden indirmesi\n" "nedeniyle oluşan (iş kaybı, işin aksaması, maddi kayıp, hukuki cezalara " "çarptırılma\n" "vb. neden olacak) doğrudan ya da dolaylı (MandrakeSoft S.A. bu tür " "zararların oluşabileceğini duyursa bile)\n" "hiçbir zarar nedeniyle sorumluluk taşımaz. Bu sınırlı sorumluluk, yazılım " "ürünleri içindeki güçlü kriptografi araçlarını kapsar, fakat\n" "bunlarla sınırlı değildir.\n" "\n" "\n" "3. GPL Lisansı ve İlgili Lisanslar\n" "\n" "Yazılım ürünleri farklı birçok kişi tarafından oluşturulmuş parçalardan " "oluşmaktadır. Bu parçaların\n" "çoğu GNU Genel Kamu Lisansı (GPL) ya da benzer lisanslara tabidirler. Bu " "lisansların çoğu, parçaların\n" "kullanımına, çoğaltılmasına, değiştirilmesine ya da tekrar dağıtımının " "yapılmasına izin vermektedir.\n" "Lütfen kullanımdan önce her bir yazılım ürünü için, onu ilgilendiren " "lisans(lar)ın tüm şartlarını\n" "okuyunuz. Bir yazılım ürünü hakkındaki herhangi bir soru, MandrakeSoft'a " "değil, o ürünün geliştiricisine\n" "yöneltilmelidir. MandrakeSoft tarafından geliştirilmiş yazılımlar GPL " "lisansıyla korunmaktadır. MandrakeSoft\n" "tarafından hazırlanan dokümanlar da özel bir lisansa tabidir. Daha fazla " "bilgi için lütfen dokümanlara\n" "göz atınız.\n" "\n" "\n" "4. Entellektüel Özellik Hakları\n" "\n" "Yazılım ürünleri üzerindeki tüm haklar bu yazılımın geliştiricisine aittir; " "yazılıma uygulanan entellektüel özellik ve kopyalama\n" "kanunlarıyla korunmaktadırlar. MandrakeSoft, yazılım ürünlerinin, bütün " "olarak ya da parça parça, herhangi bir amaç için\n" "değiştirilme ya da adapte edilme haklarını saklamaktadır. \"Mandrake\", ve " "\"Linux-Mandrake\" ve ilgili logolar MandrakeSoft S.A.'ya\n" "ait tescilli markalardır.\n" "\n" "\n" "5. Yönetim Kanunları\n" "\n" "Bu lisansın herhangi bir kısmı, bir mahkeme tarafından kanunsuz ya da " "uygunsuz bulunursa, o kısım bu kontrata dahil edilmemiş olacaktır.\n" "Diğer kısımların sınırlamaları devam edecektir. Bu lisansın şartları Fransa " "Kanunları altındadır. Bu lisansın şartlarına her türlü itiraz\n" "Paris Mahkemesi tarafından görüşülecektir. Bu doküman hakkında herhangi bir " "soru için lütfen MandrakeSoft S.A'ya başvurun.\n" #: ../../install_steps_interactive.pm_.c:182 #: ../../install_steps_interactive.pm_.c:822 #: ../../standalone/keyboarddrake_.c:28 msgid "Keyboard" msgstr "Klavye" #: ../../install_steps_interactive.pm_.c:183 #: ../../standalone/keyboarddrake_.c:29 msgid "Please, choose your keyboard layout." msgstr "Klavye düzenini seçiniz." #: ../../install_steps_interactive.pm_.c:184 msgid "Here is the full list of keyboards available" msgstr "" #: ../../install_steps_interactive.pm_.c:201 msgid "Install Class" msgstr "Kurulum Sınıfı" #: ../../install_steps_interactive.pm_.c:201 msgid "Which installation class do you want?" msgstr "Hangi kurulum sınıfını istiyorsunuz?" #: ../../install_steps_interactive.pm_.c:203 msgid "Install/Update" msgstr "Kurulum/Güncelleme" #: ../../install_steps_interactive.pm_.c:203 msgid "Is this an install or an update?" msgstr "Bu bir kurulum mu, yoksa bir güncelleme mi?" #: ../../install_steps_interactive.pm_.c:212 msgid "Recommended" msgstr "Önerilen" #: ../../install_steps_interactive.pm_.c:215 #: ../../install_steps_interactive.pm_.c:218 msgid "Expert" msgstr "Uzman" #: ../../install_steps_interactive.pm_.c:226 msgid "Update" msgstr "Güncelleme" #: ../../install_steps_interactive.pm_.c:238 ../../standalone/mousedrake_.c:31 msgid "Please, choose the type of your mouse." msgstr "Lütfen farenizin türünü seçin." #: ../../install_steps_interactive.pm_.c:244 ../../standalone/mousedrake_.c:46 msgid "Mouse Port" msgstr "Fare Kapısı" #: ../../install_steps_interactive.pm_.c:245 ../../standalone/mousedrake_.c:47 msgid "Please choose on which serial port your mouse is connected to." msgstr "Farenizin bağlı olduğu seri portu seçiniz." #: ../../install_steps_interactive.pm_.c:253 msgid "Buttons emulation" msgstr "" #: ../../install_steps_interactive.pm_.c:255 msgid "Button 2 Emulation" msgstr "" #: ../../install_steps_interactive.pm_.c:256 msgid "Button 3 Emulation" msgstr "" #: ../../install_steps_interactive.pm_.c:275 msgid "Configuring PCMCIA cards..." msgstr "PCMCIA kartlar yapılandırılıyor..." #: ../../install_steps_interactive.pm_.c:275 msgid "PCMCIA" msgstr "PCMCIA" #: ../../install_steps_interactive.pm_.c:280 msgid "Configuring IDE" msgstr "IDE yapılandırılıyor" #: ../../install_steps_interactive.pm_.c:280 msgid "IDE" msgstr "IDE" #: ../../install_steps_interactive.pm_.c:295 msgid "no available partitions" msgstr "hiç bölüm bulunamadı" #: ../../install_steps_interactive.pm_.c:298 msgid "Scanning partitions to find mount points" msgstr "Bağlama noktalarını bulmak için bölümler taranıyor" #: ../../install_steps_interactive.pm_.c:306 msgid "Choose the mount points" msgstr "Bağlama noktalarını seçin" #: ../../install_steps_interactive.pm_.c:323 #, c-format msgid "" "I can't read your partition table, it's too corrupted for me :(\n" "I can try to go on blanking bad partitions (ALL DATA will be lost!).\n" "The other solution is to disallow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to loose all the partitions?\n" msgstr "" "Bölümlendirme tablonuzu okuyamıyorum, sanırım biraz bozulmuş :-(\n" "Bozulmuş bölümleri düzeltmeye çalışabilirim (TÜM VERİLERİNİZ yok olacak!)\n" "Diğer bir çözüm de DrakX'in bölümlendirme tablosunu değiştirmesine izin\n" "vermemektir. (hata: %s)\n" "\n" "Tüm bölümleri kaybetmeye razı mısınız?\n" #: ../../install_steps_interactive.pm_.c:336 msgid "" "DiskDrake failed to read correctly the partition table.\n" "Continue at your own risk!" msgstr "" "DiskDrake bölüm tablosunu okumakta başarısız oldu.\n" "Kendiniz devam edebilirsiniz." #: ../../install_steps_interactive.pm_.c:361 msgid "Root Partition" msgstr "Kök (root) Bölümü" #: ../../install_steps_interactive.pm_.c:362 msgid "What is the root partition (/) of your system?" msgstr "Sisteminizin kök (/) bölümü hangisidir?" #: ../../install_steps_interactive.pm_.c:376 msgid "You need to reboot for the partition table modifications to take place" msgstr "" "Bölüm tablosundaki değişikliklerin geçerli olması için bilgisayarınızı " "yeniden başlatmalısınız." #: ../../install_steps_interactive.pm_.c:403 msgid "Choose the partitions you want to format" msgstr "Biçimlendirilecek disk bölümlerini seçin" #: ../../install_steps_interactive.pm_.c:404 msgid "Check bad blocks?" msgstr "Hatalı bloklar sınansın mı?" #: ../../install_steps_interactive.pm_.c:427 msgid "Formatting partitions" msgstr "Bölümler biçimlendiriliyor" #: ../../install_steps_interactive.pm_.c:429 #, c-format msgid "Creating and formatting file %s" msgstr "%s dosyası oluşturuluyor ve biçimlendiriliyor" #: ../../install_steps_interactive.pm_.c:432 msgid "Not enough swap to fulfill installation, please add some" msgstr "Kurulumu tamamlamak için yeterli alan yok, lütfen ekleme yapın" #: ../../install_steps_interactive.pm_.c:438 msgid "Looking for available packages" msgstr "Mevcut paketler taranıyor." #: ../../install_steps_interactive.pm_.c:444 msgid "Finding packages to upgrade" msgstr "Güncellenecek paketler bulunuyor" #: ../../install_steps_interactive.pm_.c:461 #, c-format msgid "" "Your system has not enough space left for installation or upgrade (%d > %d)" msgstr "" "Sisteminizde kurulum ya da güncelleme için yeterli boş yer yok (%d > %d)" #: ../../install_steps_interactive.pm_.c:480 #, c-format msgid "Complete (%dMB)" msgstr "Tamamlanan (%dMB)" #: ../../install_steps_interactive.pm_.c:480 #, c-format msgid "Minimum (%dMB)" msgstr "Minimum (%dMB)" #: ../../install_steps_interactive.pm_.c:480 #, c-format msgid "Recommended (%dMB)" msgstr "Önerilen (%dMB)" #: ../../install_steps_interactive.pm_.c:486 msgid "Custom" msgstr "Özel" #: ../../install_steps_interactive.pm_.c:585 msgid "Selected size is larger than available space" msgstr "" #: ../../install_steps_interactive.pm_.c:650 msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "Aşağıdaki listedeki tüm CD'lere sahipseniz TAMAM'a basın.\n" "CD'lerin hiçbirine sahip değiseniz VAZGEÇ'e v,basın.\n" "CD'lerden birkaçı eksikse onları seçili durumdan çıkarıp TAMAM'a basın." #: ../../install_steps_interactive.pm_.c:655 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "\"%s\" etiketli Cd-Rom" #: ../../install_steps_interactive.pm_.c:684 msgid "" "Installing package %s\n" "%d%%" msgstr "" "%s paketi kuruluyor\n" "%d%%" #: ../../install_steps_interactive.pm_.c:693 msgid "Post-install configuration" msgstr "Kurulum sonrası ayarlar" #: ../../install_steps_interactive.pm_.c:718 msgid "" "You have now the possibility to download software aimed for encryption.\n" "\n" "WARNING:\n" "\n" "Due to different general requirements applicable to these software and " "imposed\n" "by various jurisdictions, customer and/or end user of theses software " "should\n" "ensure that the laws of his/their jurisdiction allow him/them to download, " "stock\n" "and/or use these software.\n" "\n" "In addition customer and/or end user shall particularly be aware to not " "infringe\n" "the laws of his/their jurisdiction. Should customer and/or end user not\n" "respect the provision of these applicable laws, he/they will incure serious\n" "sanctions.\n" "\n" "In no event shall Mandrakesoft nor its manufacturers and/or suppliers be " "liable\n" "for special, indirect or incidental damages whatsoever (including, but not\n" "limited to loss of profits, business interruption, loss of commercial data " "and\n" "other pecuniary losses, and eventual liabilities and indemnification to be " "paid\n" "pursuant to a court decision) arising out of use, possession, or the sole\n" "downloading of these software, to which customer and/or end user could\n" "eventually have access after having sign up the present agreement.\n" "\n" "\n" "For any queries relating to these agreement, please contact \n" "Mandrakesoft, Inc.\n" "2400 N. Lincoln Avenue Suite 243\n" "Altadena California 91001\n" "USA" msgstr "" "Şimdi şifreleme için kullanılacak yazılımı indirebilirsiniz.\n" "UYARI:\n" "\n" "Bu yazılıma uygulanabilir farklı genel gereksinimler nedeniyle ve çeşitli\n" "yargı haklarından dolayı, bu yazılımın son kullanıcısı, kanunların ona bu\n" "yazılımı internetten indirme ve saklama hakkını verdiğinden emin olmalıdır.\n" "\n" "Buna ek olarak, müşteri ve/veya son kullanıcı özellikle, bulunduğu yargı " "bölgesinin\n" "yasalarını çiğnemediğinden emin olmalıdır. Müşteri ve/veya son kullanıcı \n" "kanunların uyguladığı yasal koşullara saygı göstermediğinde ciddi " "yaptırımlara\n" "maruz kalacaktır.\n" "\n" "Özel ya da dolaylı zararlara (kar azalması, işin sekteye uğraması, ticari " "bilgi\n" "kaybı ve diğer maddi kayıplar) yol açan hiçbir olayda ne Mandrakesoft, ne de " "\n" "üreticileri ve/veya kaynak sağlayanları sorumlu tutulamaz. Bu yazılımı\n" "internetten indirirken son kullanıcı işbu sözleşmeyi kabul ettiğini \n" "beyan etmiş sayılır.\n" "\n" "\n" "Bu sözleşmeyle ilgili her türlü soru için lütfen\n" "Mandrakesoft, Inc.\n" "2400 N. Lincoln Avenue Suite 243\n" "Altadena California 91001\n" "USAadresine yazınız." #: ../../install_steps_interactive.pm_.c:750 msgid "Choose a mirror from which to get the packages" msgstr "Paketleri almak için bir yansı adresi seçin" #: ../../install_steps_interactive.pm_.c:761 msgid "Contacting the mirror to get the list of available packages" msgstr "Yansı adresine bağlantı kuruluyor" #: ../../install_steps_interactive.pm_.c:764 msgid "Please choose the packages you want to install." msgstr "Lütfen kurmak istediğiniz paketleri seçin." #: ../../install_steps_interactive.pm_.c:776 msgid "Which is your timezone?" msgstr "Bulunduğunuz zaman dilimi hangisi?" #: ../../install_steps_interactive.pm_.c:778 msgid "Is your hardware clock set to GMT?" msgstr "Donanım saatiniz GMT'ye göre ayarlı mı?" #: ../../install_steps_interactive.pm_.c:806 ../../printer.pm_.c:22 #: ../../printerdrake.pm_.c:415 msgid "Remote CUPS server" msgstr "Uzaktaki CUPS sunucusu" #: ../../install_steps_interactive.pm_.c:807 #, fuzzy msgid "No printer" msgstr "Yazıcının adı" #: ../../install_steps_interactive.pm_.c:821 #, fuzzy msgid "Mouse" msgstr "USB Fare" #: ../../install_steps_interactive.pm_.c:823 msgid "Timezone" msgstr "" #: ../../install_steps_interactive.pm_.c:824 ../../printerdrake.pm_.c:344 msgid "Printer" msgstr "Yazıcı" #: ../../install_steps_interactive.pm_.c:826 #, fuzzy msgid "ISDN card" msgstr "İçsel ISDN kartı" #: ../../install_steps_interactive.pm_.c:829 #, fuzzy msgid "Sound card" msgstr "Standart" #: ../../install_steps_interactive.pm_.c:832 msgid "TV card" msgstr "" #: ../../install_steps_interactive.pm_.c:862 msgid "Which printing system do you want to use?" msgstr "Hangi yazdırma sistemini kullanmak istiyorsunuz?" #: ../../install_steps_interactive.pm_.c:896 msgid "No password" msgstr "Parola yok" #: ../../install_steps_interactive.pm_.c:901 #, c-format msgid "This password is too simple (must be at least %d characters long)" msgstr "Bu parola çok basit (en az %d karakter boyunda olmalıdı)" #: ../../install_steps_interactive.pm_.c:907 msgid "Use NIS" msgstr "NIS kullan" #: ../../install_steps_interactive.pm_.c:907 msgid "yellow pages" msgstr "sarı sayfalar" #: ../../install_steps_interactive.pm_.c:912 msgid "Authentification NIS" msgstr "NIS" #: ../../install_steps_interactive.pm_.c:913 msgid "NIS Domain" msgstr "NIS alanı" #: ../../install_steps_interactive.pm_.c:914 msgid "NIS Server" msgstr "NIS sunucu " #: ../../install_steps_interactive.pm_.c:948 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" "Özel bir açılış disketi, Linux sisteminizin normal bir sistem yükleyiciye " "gerek\n" "kalmadan açılmasını sağlar. Eğer sisteminize SILO kurmayacaksanız,\n" "ya da başka bir işletim sistemi SILO'yu silerse ya da SILO donanımınızla " "çalışmazsa\n" "bu disket size yardımcı olacaktır. Sonradan Mandrake kurtarma disketi " "görüntüsünü\n" "kullanarak da bu disket oluşturulabilir.\n" "Açılış disketi oluşturmak istiyorsanız, lütfen sürücüye boş bir disket " "yerleştirip \"Tamam\"'a basın.?" #: ../../install_steps_interactive.pm_.c:964 msgid "First floppy drive" msgstr "İlk disket sürücü" #: ../../install_steps_interactive.pm_.c:965 msgid "Second floppy drive" msgstr "İkinci disket sürücü" #: ../../install_steps_interactive.pm_.c:966 msgid "Skip" msgstr "Atla" #: ../../install_steps_interactive.pm_.c:971 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?" msgstr "" "Özel bir açılış disketi, Linux sisteminizin normal bir sistem yükleyiciye " "gerek\n" "kalmadan açılmasını sağlar. Eğer sisteminize lilo (ya da grub) " "kurmayacaksanız,\n" "ya da başka bir işletim sistemi lilo'yu silerse ya da lilo donanımınızla " "çalışmazsa\n" "bu disket size yardımcı olacaktır. Sonradan Mandrake kurtarma disketi " "görüntüsünü\n" "kullanarak da bu disket oluşturulabilir.\n" "Açılış disketi oluşturmak istiyor musunuz?" #: ../../install_steps_interactive.pm_.c:980 msgid "Sorry, no floppy drive available" msgstr "Disket sürücü yok" #: ../../install_steps_interactive.pm_.c:984 msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "Açılış disketi yapmak için kullanılacak disket sürücüyü seçin" #: ../../install_steps_interactive.pm_.c:988 #, c-format msgid "Insert a floppy in drive %s" msgstr "%s sürücüsüne bir disket takın" #: ../../install_steps_interactive.pm_.c:991 msgid "Creating bootdisk" msgstr "Açılış disketi oluşturuluyor" #: ../../install_steps_interactive.pm_.c:998 msgid "Preparing bootloader" msgstr "Açılış yükleyici hazırlanıyor" #: ../../install_steps_interactive.pm_.c:1007 msgid "Do you want to use aboot?" msgstr "aboot'u kullanmak istiyor musunuz?" #: ../../install_steps_interactive.pm_.c:1010 msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "aboot kurulumunda hata, \n" "ilk disk bölmesini yok etse bile ille de kurulmasını istiyor musunuz?" #: ../../install_steps_interactive.pm_.c:1019 msgid "Installation of bootloader failed. The following error occured:" msgstr "Açılış yükleyicisi kurulumu başarısız. Oluşan hata:" #: ../../install_steps_interactive.pm_.c:1027 msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device $of_boot,\\\\tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" #: ../../install_steps_interactive.pm_.c:1035 ../../standalone/draksec_.c:23 msgid "Low" msgstr "Düşük" #: ../../install_steps_interactive.pm_.c:1036 ../../standalone/draksec_.c:24 msgid "Medium" msgstr "Orta" #: ../../install_steps_interactive.pm_.c:1037 ../../standalone/draksec_.c:25 msgid "High" msgstr "Yüksek" #: ../../install_steps_interactive.pm_.c:1041 ../../standalone/draksec_.c:49 msgid "Choose security level" msgstr "Güvenlik seviyesini seçin" #: ../../install_steps_interactive.pm_.c:1074 msgid "Do you want to generate an auto install floppy for linux replication?" msgstr "" "Linux kopyalaması için bir tane otomatik kurulum disketi oluşturmak ister " "misiniz?" #: ../../install_steps_interactive.pm_.c:1076 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "%s sürücüsüne boş bir disket yerleştirin" #: ../../install_steps_interactive.pm_.c:1090 #: ../../install_steps_interactive.pm_.c:1122 msgid "Creating auto install floppy" msgstr "Otomatik kurulum disketi hazırlanıyor" #: ../../install_steps_interactive.pm_.c:1150 msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "Bazı bölümler tamamlanmadı.\n" "\n" "Gerçekten çıkmak istiyormusunuz?" #: ../../install_steps_interactive.pm_.c:1161 msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "For information on fixes which are available for this release of " "Linux-Mandrake,\n" "consult the Errata available from http://www.linux-mandrake.com/.\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Linux-Mandrake User's Guide." msgstr "" "Tebrikler, kurulum tamamlandı.\n" "Cdrom ve disketi çıkarttıktan sonra Enter'a basarak bilgisayarınızı \n" "yeniden başlatın. Linux Mandrake'nin bu sürümündeki yamalar hakkında \n" "bilgi almak için http://www.linux-mandrake.com adresinden Errata'ya " "bakınız.\n" "Sisteminizin ayarları hakkında daha geniş bilgiyi Linux Mandrake \n" "Kullanıcı Kitapçığı'nda bulabilirsiniz." #: ../../install_steps_interactive.pm_.c:1173 #, fuzzy msgid "Generate auto install floppy" msgstr "Otomatik kurulum disketi hazırlanıyor" #: ../../install_steps_interactive.pm_.c:1175 msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" #: ../../install_steps_interactive.pm_.c:1180 msgid "Automated" msgstr "Otomatik" #: ../../install_steps_interactive.pm_.c:1180 #, fuzzy msgid "Replay" msgstr "Tekrar yükle" #: ../../install_steps_interactive.pm_.c:1183 #, fuzzy msgid "Save packages selection" msgstr "Tek tek paket seçimi" #: ../../install_steps_newt.pm_.c:22 #, c-format msgid "Linux-Mandrake Installation %s" msgstr "Linux-Mandrake Kurulum %s" #: ../../install_steps_newt.pm_.c:33 msgid "" " / between elements | selects | next screen " msgstr "" " / ileri/geri | işaretle | sonraki ekran" #: ../../interactive.pm_.c:65 #, fuzzy msgid "kdesu missing" msgstr "vazgeç" #: ../../interactive.pm_.c:263 msgid "Advanced" msgstr "" #: ../../interactive.pm_.c:286 msgid "Please wait" msgstr "Lütfen bekleyin" #: ../../interactive_stdio.pm_.c:35 #, c-format msgid "Ambiguity (%s), be more precise\n" msgstr "Karışıklık (%s), daha açık yazın\n" #: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51 #: ../../interactive_stdio.pm_.c:71 msgid "Bad choice, try again\n" msgstr "Hatalı tercih, tekrar deneyin\n" #: ../../interactive_stdio.pm_.c:39 #, c-format msgid " ? (default %s) " msgstr " ? (öntanımlı %s) " #: ../../interactive_stdio.pm_.c:52 #, c-format msgid "Your choice? (default %s) " msgstr "Seçiminiz? (öntanımlı %s) " #: ../../interactive_stdio.pm_.c:72 #, c-format msgid "Your choice? (default %s enter `none' for none) " msgstr "Seçiminiz (öntanımlı %s, yoksa `none' yazın) " #: ../../keyboard.pm_.c:124 ../../keyboard.pm_.c:154 msgid "Czech (QWERTZ)" msgstr "Çek dili (QWERTZ)" #: ../../keyboard.pm_.c:125 ../../keyboard.pm_.c:138 ../../keyboard.pm_.c:157 msgid "German" msgstr "Almanca" #: ../../keyboard.pm_.c:126 msgid "Dvorak" msgstr "Dvorak dili" #: ../../keyboard.pm_.c:127 ../../keyboard.pm_.c:163 msgid "Spanish" msgstr "İspanyolca" #: ../../keyboard.pm_.c:128 ../../keyboard.pm_.c:164 msgid "Finnish" msgstr "Fince" #: ../../keyboard.pm_.c:129 ../../keyboard.pm_.c:139 ../../keyboard.pm_.c:165 msgid "French" msgstr "Fransızca" #: ../../keyboard.pm_.c:130 ../../keyboard.pm_.c:186 msgid "Norwegian" msgstr "Norveççe" #: ../../keyboard.pm_.c:131 msgid "Polish" msgstr "Polonya dili" #: ../../keyboard.pm_.c:132 ../../keyboard.pm_.c:191 msgid "Russian" msgstr "Rusça" #: ../../keyboard.pm_.c:133 ../../keyboard.pm_.c:202 msgid "UK keyboard" msgstr "İngiliz (UK) klavye" #: ../../keyboard.pm_.c:134 ../../keyboard.pm_.c:137 ../../keyboard.pm_.c:203 msgid "US keyboard" msgstr "Amerikan (US) klavye" #: ../../keyboard.pm_.c:141 msgid "Armenian (old)" msgstr "Ermenice (eski) " #: ../../keyboard.pm_.c:142 msgid "Armenian (typewriter)" msgstr "Ermenice (daktilo)" #: ../../keyboard.pm_.c:143 msgid "Armenian (phonetic)" msgstr "Ermenice (fonetik)" #: ../../keyboard.pm_.c:146 msgid "Azerbaidjani (latin)" msgstr "Azerice (latin)" #: ../../keyboard.pm_.c:147 msgid "Azerbaidjani (cyrillic)" msgstr "Azerice (kril alfabesi)" #: ../../keyboard.pm_.c:148 msgid "Belgian" msgstr "Belçika dili" #: ../../keyboard.pm_.c:149 msgid "Bulgarian" msgstr "Bulgarca" #: ../../keyboard.pm_.c:150 msgid "Brazilian (ABNT-2)" msgstr "Brezilya dili" #: ../../keyboard.pm_.c:151 msgid "Belarusian" msgstr "Belarusça" #: ../../keyboard.pm_.c:152 msgid "Swiss (German layout)" msgstr "İsveççe (Alman düzeni)" #: ../../keyboard.pm_.c:153 msgid "Swiss (French layout)" msgstr "İsveççe (Fransız düzeni)" #: ../../keyboard.pm_.c:155 msgid "Czech (QWERTY)" msgstr "Çek dili (QWERTY)" #: ../../keyboard.pm_.c:156 msgid "Czech (Programmers)" msgstr "" #: ../../keyboard.pm_.c:158 msgid "German (no dead keys)" msgstr "Almanca (ölü tuşlar yok" #: ../../keyboard.pm_.c:159 msgid "Danish" msgstr "Danimarka dili" #: ../../keyboard.pm_.c:160 msgid "Dvorak (US)" msgstr "Dvorak dili (US)" #: ../../keyboard.pm_.c:161 msgid "Dvorak (Norwegian)" msgstr "Dvorak (Norveççe)" #: ../../keyboard.pm_.c:162 msgid "Estonian" msgstr "Estonya dili" #: ../../keyboard.pm_.c:166 msgid "Georgian (\"Russian\" layout)" msgstr "Gürcü dili (Rus düzeni)" #: ../../keyboard.pm_.c:167 msgid "Georgian (\"Latin\" layout)" msgstr "Gürcü dili (Latin düzen)" #: ../../keyboard.pm_.c:168 msgid "Greek" msgstr "Yunanca" #: ../../keyboard.pm_.c:169 msgid "Hungarian" msgstr "Macarca" #: ../../keyboard.pm_.c:170 msgid "Croatian" msgstr "Croatian" #: ../../keyboard.pm_.c:171 msgid "Israeli" msgstr "İbranice" #: ../../keyboard.pm_.c:172 msgid "Israeli (Phonetic)" msgstr "İbranice (Fonetik)" #: ../../keyboard.pm_.c:173 msgid "Iranian" msgstr "Farsça" #: ../../keyboard.pm_.c:174 msgid "Icelandic" msgstr "İzlanda dili" #: ../../keyboard.pm_.c:175 msgid "Italian" msgstr "İtalyanca" #: ../../keyboard.pm_.c:176 msgid "Japanese 106 keys" msgstr "Japonca 106 tuş" #: ../../keyboard.pm_.c:177 #, fuzzy msgid "Korean keyboard" msgstr "İngiliz (UK) klavye" #: ../../keyboard.pm_.c:178 msgid "Latin American" msgstr "Latin Amerika dili" #: ../../keyboard.pm_.c:179 msgid "Macedonian" msgstr "" #: ../../keyboard.pm_.c:180 msgid "Dutch" msgstr "Hollanda dili" #: ../../keyboard.pm_.c:181 msgid "Lithuanian AZERTY (old)" msgstr "Litvanya dili AZERTY (eski)" #: ../../keyboard.pm_.c:183 msgid "Lithuanian AZERTY (new)" msgstr "Litvanya dili AZERTY" #: ../../keyboard.pm_.c:184 msgid "Lithuanian \"number row\" QWERTY" msgstr "Litvanya dili QWERTY" #: ../../keyboard.pm_.c:185 msgid "Lithuanian \"phonetic\" QWERTY" msgstr "Litvanya dili \"Fonetik\" QWERTY" #: ../../keyboard.pm_.c:187 msgid "Polish (qwerty layout)" msgstr "Lehçe (QWERTY düzeni)" #: ../../keyboard.pm_.c:188 msgid "Polish (qwertz layout)" msgstr "Lehçe (QWERTZ düzeni)" #: ../../keyboard.pm_.c:189 msgid "Portuguese" msgstr "Portekizce" #: ../../keyboard.pm_.c:190 msgid "Canadian (Quebec)" msgstr "Fransızca (Kanada/Quebec)" #: ../../keyboard.pm_.c:192 msgid "Russian (Yawerty)" msgstr "Rusça (Yawerty)" #: ../../keyboard.pm_.c:193 msgid "Swedish" msgstr "İsveççe" #: ../../keyboard.pm_.c:194 msgid "Slovenian" msgstr "Slovence" #: ../../keyboard.pm_.c:195 msgid "Slovakian (QWERTZ)" msgstr "Slovakça (QWERTZ)" #: ../../keyboard.pm_.c:196 msgid "Slovakian (QWERTY)" msgstr "Slovakça (QWERTY)" #: ../../keyboard.pm_.c:197 msgid "Slovakian (Programmers)" msgstr "" #: ../../keyboard.pm_.c:198 msgid "Thai keyboard" msgstr "Thai klavye" #: ../../keyboard.pm_.c:199 msgid "Turkish (traditional \"F\" model)" msgstr "Türkçe (geleneksel \"F\" klavye)" #: ../../keyboard.pm_.c:200 msgid "Turkish (modern \"Q\" model)" msgstr "Türkçe (modern \"Q\" klavye)" #: ../../keyboard.pm_.c:201 msgid "Ukrainian" msgstr "Ukrayna dili" #: ../../keyboard.pm_.c:204 msgid "US keyboard (international)" msgstr "Amerikan (US) klavye (uluslararası)" #: ../../keyboard.pm_.c:205 msgid "Vietnamese \"numeric row\" QWERTY" msgstr "Vietnamca \"numerik satır\" QWERTY" #: ../../keyboard.pm_.c:206 #, fuzzy msgid "Yugoslavian (latin/cyrillic)" msgstr "Yugoslavca (latin düzeni)" #: ../../lvm.pm_.c:70 msgid "Remove the logical volumes first\n" msgstr "" #: ../../mouse.pm_.c:25 msgid "Sun - Mouse" msgstr "Sun - Fare" #: ../../mouse.pm_.c:31 msgid "Standard" msgstr "Standart" #: ../../mouse.pm_.c:32 msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: ../../mouse.pm_.c:33 #, fuzzy msgid "Generic PS2 Wheel Mouse" msgstr "Sıradan Fare" #: ../../mouse.pm_.c:34 msgid "GlidePoint" msgstr "GlidePoint" #: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62 msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58 msgid "Genius NetMouse" msgstr "Genius NetMouse" #: ../../mouse.pm_.c:38 msgid "Genius NetScroll" msgstr "Genius NetScroll" #: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67 #, fuzzy msgid "1 button" msgstr "2 tuşlu" #: ../../mouse.pm_.c:44 msgid "Generic" msgstr "Genel" #: ../../mouse.pm_.c:45 msgid "Wheel" msgstr "Tekerli" #: ../../mouse.pm_.c:48 msgid "serial" msgstr "seri" #: ../../mouse.pm_.c:50 msgid "Generic 2 Button Mouse" msgstr "Sıradan 2 Tuşlu Fare" #: ../../mouse.pm_.c:51 msgid "Generic 3 Button Mouse" msgstr "Sıradan 3 Tuşlu Fare" #: ../../mouse.pm_.c:52 msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: ../../mouse.pm_.c:53 msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: ../../mouse.pm_.c:54 msgid "Mouse Systems" msgstr "Mouse Systems" #: ../../mouse.pm_.c:56 msgid "Logitech CC Series" msgstr "Logitech CC Series" #: ../../mouse.pm_.c:57 msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: ../../mouse.pm_.c:59 msgid "MM Series" msgstr "MM Series" #: ../../mouse.pm_.c:60 msgid "MM HitTablet" msgstr "MM HitTablet" #: ../../mouse.pm_.c:61 msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech mouse (seri ya da eski C7 tipi)" #: ../../mouse.pm_.c:65 msgid "busmouse" msgstr "bus fare" #: ../../mouse.pm_.c:68 msgid "2 buttons" msgstr "2 tuşlu" #: ../../mouse.pm_.c:69 msgid "3 buttons" msgstr "3 tuşlu" #: ../../mouse.pm_.c:72 msgid "none" msgstr "hiçbiri" #: ../../mouse.pm_.c:74 msgid "No mouse" msgstr "Fare yok" #: ../../my_gtk.pm_.c:356 #, fuzzy msgid "Finish" msgstr "Fince" #: ../../my_gtk.pm_.c:356 msgid "Next ->" msgstr "Sonraki ->" #: ../../my_gtk.pm_.c:357 msgid "<- Previous" msgstr "" #: ../../my_gtk.pm_.c:616 msgid "Is this correct?" msgstr "Kabul ediyor musunuz?" #: ../../netconnect.pm_.c:141 msgid "Internet configuration" msgstr "İnternet ayarları" #: ../../netconnect.pm_.c:142 msgid "Do you want to try to connect to the Internet now?" msgstr "İnternet bağlantısını şimdi denemek ister misiniz?" #: ../../netconnect.pm_.c:146 msgid "Testing your connection..." msgstr "Bağlantınız test ediliyor..." #: ../../netconnect.pm_.c:152 ../../standalone/draknet_.c:196 msgid "The system is now connected to Internet." msgstr "Sistem şu anda internete bağlı." #: ../../netconnect.pm_.c:153 msgid "For Security reason, it will be disconnected now." msgstr "" #: ../../netconnect.pm_.c:154 ../../standalone/draknet_.c:196 msgid "" "The system doesn't seem to be connected to internet.\n" "Try to reconfigure your connection." msgstr "" "Sistem internete bağlı gibi görünmüyor.\n" "Bağlantıyı tekrar ayarlamayı deneyin." #: ../../netconnect.pm_.c:159 ../../netconnect.pm_.c:901 #: ../../netconnect.pm_.c:930 ../../netconnect.pm_.c:1008 msgid "Network Configuration" msgstr "Ağ Yapılandırması" #: ../../netconnect.pm_.c:220 ../../netconnect.pm_.c:264 #: ../../netconnect.pm_.c:274 ../../netconnect.pm_.c:281 #: ../../netconnect.pm_.c:291 msgid "ISDN Configuration" msgstr "ISDN Yapılandırması" #: ../../netconnect.pm_.c:220 msgid "" "Select your provider.\n" " If it's not in the list, choose Unlisted" msgstr "" "Servis sağlayıcınızı seçin.\n" " Eğer listede yoksa, Listelenmemiş'i seçin." #: ../../netconnect.pm_.c:234 msgid "Connection Configuration" msgstr "Bağlantı Ayarları" #: ../../netconnect.pm_.c:235 msgid "Please fill or check the field below" msgstr "Lütfen aşağıdaki alanı doldurun ya da kontrol edin." #: ../../netconnect.pm_.c:237 ../../standalone/draknet_.c:550 msgid "Card IRQ" msgstr "Kartın IRQ değeri" #: ../../netconnect.pm_.c:238 ../../standalone/draknet_.c:551 msgid "Card mem (DMA)" msgstr "Kartın DMA değeri" #: ../../netconnect.pm_.c:239 ../../standalone/draknet_.c:552 msgid "Card IO" msgstr "Kartın IO değeri" #: ../../netconnect.pm_.c:240 ../../standalone/draknet_.c:553 msgid "Card IO_0" msgstr "Kartın IO_0 değeri" #: ../../netconnect.pm_.c:241 ../../standalone/draknet_.c:554 msgid "Card IO_1" msgstr "Kartın IO_1 değeri" #: ../../netconnect.pm_.c:242 ../../standalone/draknet_.c:555 msgid "Your personal phone number" msgstr "Kişisel telefon numaranız" #: ../../netconnect.pm_.c:243 ../../standalone/draknet_.c:556 msgid "Provider name (ex provider.net)" msgstr "Servis sağlayıcı adı" #: ../../netconnect.pm_.c:244 ../../standalone/draknet_.c:557 msgid "Provider phone number" msgstr "Servis sağlayıcının telefon numarası" #: ../../netconnect.pm_.c:245 msgid "Provider dns 1" msgstr "1. Alan adı sunucusu" #: ../../netconnect.pm_.c:246 msgid "Provider dns 2" msgstr "2. Alan adı sunucusu" #: ../../netconnect.pm_.c:247 ../../standalone/draknet_.c:562 msgid "Dialing mode" msgstr "Çevirme kipi" #: ../../netconnect.pm_.c:248 ../../standalone/draknet_.c:560 msgid "Account Login (user name)" msgstr "Kullanıcı Adı" #: ../../netconnect.pm_.c:249 ../../standalone/draknet_.c:561 msgid "Account Password" msgstr "Şifre" #: ../../netconnect.pm_.c:259 msgid "Europe" msgstr "Avrupa" #: ../../netconnect.pm_.c:259 msgid "Europe (EDSS1)" msgstr "Avrupa (EDSS1)" #: ../../netconnect.pm_.c:261 msgid "Rest of the world" msgstr "Dünyanın diğer kısımları" #: ../../netconnect.pm_.c:261 msgid "" "Rest of the world \n" " no D-Channel (leased lines)" msgstr "" "Dünyanın diğer kısımları \n" " D-Kanalı yok (kiralık hat)" #: ../../netconnect.pm_.c:265 msgid "Which protocol do you want to use ?" msgstr "Hangi protokolü kullanmak istiyorsunuz?" #: ../../netconnect.pm_.c:275 msgid "What kind of card do you have?" msgstr "Ne tür bir kartınız var?" #: ../../netconnect.pm_.c:276 msgid "I don't know" msgstr "Bilmiyorum" #: ../../netconnect.pm_.c:276 msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: ../../netconnect.pm_.c:276 msgid "PCI" msgstr "PCI" #: ../../netconnect.pm_.c:282 msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the irq and io of your card.\n" msgstr "" "\n" "Bir ISA karta sahipseniz bir sonraki ekrandaki değerler doğru olacaktır.\n" "\n" "Bir PCMCIA karta sahipseniz, kartınızın irq ve io değerlerini bilmek " "sorundasınız.\n" #: ../../netconnect.pm_.c:286 msgid "Abort" msgstr "Vazgeç" #: ../../netconnect.pm_.c:286 msgid "Continue" msgstr "Devam" #: ../../netconnect.pm_.c:292 msgid "Which is your ISDN card ?" msgstr "Hangisi sizin ISDN kartınız?" #: ../../netconnect.pm_.c:312 msgid "" "I have detected an ISDN PCI Card, but I don't know the type. Please select " "one PCI card on the next screen." msgstr "" "Bir PCI ISDN kartı buldum, fakat türünü bilmiyorum. Lütfen bir sonraki " "ekrandan bir PCI kart seçin." #: ../../netconnect.pm_.c:321 msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "PCI ISDN kart bulunamadı. Lütfen bir sonraki ekrandan bir tane seçin." #: ../../netconnect.pm_.c:369 msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" "Sisteminize bağlı bir ethernet kartı bulunamadı. Bu bağlantı\n" "türünü ayarlayamayacağım." #: ../../netconnect.pm_.c:373 ../../standalone/drakgw_.c:232 msgid "Choose the network interface" msgstr "Ağ bağdaştırıcısını seçin" #: ../../netconnect.pm_.c:374 msgid "" "Please choose which network adapter you want to use to connect to Internet" msgstr "" "Lütfen internete bağlanmak için kullanacağınız ağ bağdaştırıcısını seçin" #: ../../netconnect.pm_.c:383 ../../netconnect.pm_.c:697 #: ../../netconnect.pm_.c:842 ../../standalone/drakgw_.c:223 msgid "Network interface" msgstr "Ağ arabirimi" #: ../../netconnect.pm_.c:384 msgid "" "\n" "Do you agree?" msgstr "" "\n" "Kabul ediyor musunuz?" #: ../../netconnect.pm_.c:384 msgid "I'm about to restart the network device:\n" msgstr "Ağ aygıtını kapatıp açmak üzereyim:\n" #: ../../netconnect.pm_.c:482 msgid "ADSL configuration" msgstr "ADSL ayarları" #: ../../netconnect.pm_.c:483 msgid "Do you want to start your connection at boot?" msgstr "Bağlantınızın açılışta başlatılmasını ister misiniz?" #: ../../netconnect.pm_.c:618 msgid "Please choose which serial port your modem is connected to." msgstr "Modeminizin hangi seri porta bağlı olduğunu seçiniz" #: ../../netconnect.pm_.c:623 msgid "Dialup options" msgstr "Çevirmeli ağ seçenekleri" #: ../../netconnect.pm_.c:624 ../../standalone/draknet_.c:564 msgid "Connection name" msgstr "Bağlantı adı" #: ../../netconnect.pm_.c:625 ../../standalone/draknet_.c:565 msgid "Phone number" msgstr "Telefon numarası" #: ../../netconnect.pm_.c:626 ../../standalone/draknet_.c:566 msgid "Login ID" msgstr "Giriş adı" #: ../../netconnect.pm_.c:628 ../../standalone/draknet_.c:568 msgid "Authentication" msgstr "Kimlik tanıma" #: ../../netconnect.pm_.c:628 ../../standalone/draknet_.c:568 msgid "PAP" msgstr "PAP" #: ../../netconnect.pm_.c:628 ../../standalone/draknet_.c:568 msgid "Script-based" msgstr "Betik tabanlı" #: ../../netconnect.pm_.c:628 ../../standalone/draknet_.c:568 msgid "Terminal-based" msgstr "Terminal tabanlı" #: ../../netconnect.pm_.c:629 ../../standalone/draknet_.c:569 msgid "Domain name" msgstr "Alan adı" #: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570 #, fuzzy msgid "First DNS Server (optional)" msgstr "Birincil DNS Sunucu" #: ../../netconnect.pm_.c:631 ../../standalone/draknet_.c:571 #, fuzzy msgid "Second DNS Server (optional)" msgstr "İkincil DNS Sunucu" #: ../../netconnect.pm_.c:698 msgid "" "I'm about to restart the network device $netc->{NET_DEVICE}. Do you agree?" msgstr "$netc->{NET_DEVICE} Ağ aygıtını kapatıp açacağım. İstiyor musunuz?" #: ../../netconnect.pm_.c:742 msgid "" "\n" "You can disconnect or reconfigure your connection." msgstr "" "\n" "Bağlantıyı kesebilir ya da yeniden ayarlayabilirsiniz." #: ../../netconnect.pm_.c:742 ../../netconnect.pm_.c:745 msgid "" "\n" "You can reconfigure your connection." msgstr "" "\n" "Bağlantınızı yeniden ayarlayabilirsiniz." #: ../../netconnect.pm_.c:742 msgid "You are currently connected to internet." msgstr "Şu anda internete bağlısınız." #: ../../netconnect.pm_.c:745 msgid "" "\n" "You can connect to Internet or reconfigure your connection." msgstr "" "\n" "İnternete bağlanabilir ya da bağlantınızı yeniden ayarlayabilirsiniz." #: ../../netconnect.pm_.c:745 msgid "You are not currently connected to Internet." msgstr "Şu anda internete bağlı değilsiniz." #: ../../netconnect.pm_.c:749 ../../standalone/net_monitor_.c:81 msgid "Connect to Internet" msgstr "İnternete Bağlan" #: ../../netconnect.pm_.c:751 msgid "Disconnect from Internet" msgstr "İnternetten Çık" #: ../../netconnect.pm_.c:753 msgid "Configure network connection (LAN or Internet)" msgstr "Ağ bağlantısını yapılandır (Yerel ağ ya da İnternet)" #: ../../netconnect.pm_.c:756 msgid "Internet connection & configuration" msgstr "İnternet bağlantısı & ayarları" #: ../../netconnect.pm_.c:808 ../../netconnect.pm_.c:957 #: ../../netconnect.pm_.c:967 ../../netconnect.pm_.c:982 #, fuzzy msgid "Network Configuration Wizard" msgstr "Ağ Yapılandırması" #: ../../netconnect.pm_.c:809 msgid "External ISDN modem" msgstr "Dışsal ISDN modem" #: ../../netconnect.pm_.c:809 msgid "Internal ISDN card" msgstr "İçsel ISDN kartı" #: ../../netconnect.pm_.c:809 msgid "What kind is your ISDN connection?" msgstr "ISDN bağlantınız hangi türde?" #: ../../netconnect.pm_.c:830 ../../netconnect.pm_.c:879 msgid "Connect to the Internet" msgstr "İnternete bağlan" #: ../../netconnect.pm_.c:831 #, fuzzy msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few ones use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" "Adsl ile bağlanmanın en sık başvurulan yolu dhcp + pppoe'dir.\n" "Fakat bazı bağlantılar sadece dhcp'yi kullanır.\n" "Emin değilseniz lütfen pppoe'yi seçin" #: ../../netconnect.pm_.c:833 msgid "use dhcp" msgstr "" #: ../../netconnect.pm_.c:833 msgid "use pppoe" msgstr "pppoe'yi kullan" #: ../../netconnect.pm_.c:833 msgid "use pptp" msgstr "pptp'yi kullan" #: ../../netconnect.pm_.c:843 #, c-format msgid "I'm about to restart the network device %s. Do you agree?" msgstr "%s Ağ aygıtını kapatıp açacağım. İstiyor musunuz?" #: ../../netconnect.pm_.c:880 msgid "" "Which dhcp client do you want to use?\n" "Default is dhcpcd" msgstr "" "Hangi dhcp işlemcisini kullanmak istiyorsunuz?Öntanımlı olan dhcpcd'dir" #: ../../netconnect.pm_.c:897 msgid "Network configuration" msgstr "Ağ Yapılandırması" #: ../../netconnect.pm_.c:898 msgid "Do you want to restart the network" msgstr "Ağınızı yeniden başlatmak istiyor musunuz?" #: ../../netconnect.pm_.c:901 #, fuzzy, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "Ağınızı yeniden başlatmak istiyor musunuz?" #: ../../netconnect.pm_.c:931 msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" #: ../../netconnect.pm_.c:958 msgid "" "Welcome to The Network Configuration Wizard\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" #: ../../netconnect.pm_.c:960 #, fuzzy msgid "Choose the profile to configure" msgstr "Varsayılan kullanıcıyı seçin:" #: ../../netconnect.pm_.c:961 msgid "Use auto detection" msgstr "" #: ../../netconnect.pm_.c:967 ../../printerdrake.pm_.c:19 msgid "Detecting devices..." msgstr "Aygıtlar taranıyor..." #: ../../netconnect.pm_.c:974 #, fuzzy msgid "Normal modem connection" msgstr "Normal bir modem bağlantısı yapılandır" #: ../../netconnect.pm_.c:974 #, fuzzy, c-format msgid "detected on port %s" msgstr "%s bağlama noktasını çoğalt" #: ../../netconnect.pm_.c:975 #, fuzzy msgid "ISDN connection" msgstr "Bir ISDN bağlantısı yapılandır" #: ../../netconnect.pm_.c:975 #, c-format msgid "detected %s" msgstr "" #: ../../netconnect.pm_.c:976 #, fuzzy msgid "DSL (or ADSL) connection" msgstr "Bir DSL (ya da ADSL) bağlantısı ayarla" #: ../../netconnect.pm_.c:976 #, fuzzy, c-format msgid "detected on interface %s" msgstr "Ağ arabirimi" #: ../../netconnect.pm_.c:977 #, fuzzy msgid "Cable connection" msgstr "Bir kablo bağlantısı yapılandır" #: ../../netconnect.pm_.c:978 #, fuzzy msgid "LAN connection" msgstr "ADSL ayarları" #: ../../netconnect.pm_.c:978 msgid "ethernet card(s) detected" msgstr "" #: ../../netconnect.pm_.c:983 msgid "How do you want to connect to the Internet?" msgstr "İnternete hangi yolla bağlanmak istiyorsunuz?" #: ../../netconnect.pm_.c:1000 msgid "" "Congratulation, The network and internet configuration is finished.\n" "\n" "The configuration will now be applied to your system." msgstr "" #: ../../netconnect.pm_.c:1003 msgid "" "After that is done, we recommend you to restart your X\n" "environnement to avoid hostname changing problem." msgstr "" #: ../../network.pm_.c:253 msgid "no network card found" msgstr "ağ kartı bulunamadı" #: ../../network.pm_.c:277 ../../network.pm_.c:387 msgid "Configuring network" msgstr "Ağ Ayarları" #: ../../network.pm_.c:278 msgid "" "Please enter your host name if you know it.\n" "Some DHCP servers require the hostname to work.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''." msgstr "" "Eğer biliyorsanız lütfen makinanızın ismini girin.\n" "Bazı DHCP sunucuları çalışabilmek için sunucu ismi gerektirirler.\n" "Sunucu isminiz, sunucu adı kurallarına tam olarak uygun olmalıdır,\n" "Örneğin ``bilgisayarım.alanadı.com'' gibi." #: ../../network.pm_.c:282 ../../network.pm_.c:392 msgid "Host name" msgstr "Sunucu ismi:" #: ../../network.pm_.c:319 #, fuzzy msgid "" "WARNING: This device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" "UYARI: Bu aygıt daha önce internet bağlantısı için yapılandırılmış.\n" "Bu yapılanmayı değiştirmemek istiyorsanız sadece Tamam'a basın.\n" "Aşağıdaki alanlardaki bilgileri değiştirmek ayarları da değiştirecektir." #: ../../network.pm_.c:324 msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "Lütfen bu makina için gerekli IP değerlerini girin." #: ../../network.pm_.c:333 ../../network.pm_.c:334 #, c-format msgid "Configuring network device %s" msgstr "%s ağ aygıtı ayarlanıyor" #: ../../network.pm_.c:334 msgid " (driver $module)" msgstr "" #: ../../network.pm_.c:336 ../../standalone/draknet_.c:231 #: ../../standalone/draknet_.c:425 msgid "IP address" msgstr "IP adresi:" #: ../../network.pm_.c:337 ../../standalone/draknet_.c:426 msgid "Netmask" msgstr "Ağ maskesi:" #: ../../network.pm_.c:338 msgid "(bootp/dhcp)" msgstr "(bootp/dhcp)" #: ../../network.pm_.c:338 msgid "Automatic IP" msgstr "Otomatik IP" #: ../../network.pm_.c:359 ../../printerdrake.pm_.c:102 #: ../../printerdrake.pm_.c:425 msgid "IP address should be in format 1.2.3.4" msgstr "IP adresi 1.2.3.4 biçimide olmalıdır" #: ../../network.pm_.c:388 msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one" msgstr "" "Lütfen makinanızın ismini girin.\n" "Örneğin ``makinaismi.alanadı.com''.\n" "Eğer ağ geçiti kullanıyorsanız bunun da IP numarasını girmelisiniz." #: ../../network.pm_.c:393 msgid "DNS server" msgstr "DNS sunucusu" #: ../../network.pm_.c:394 ../../standalone/draknet_.c:563 msgid "Gateway" msgstr "Ağ geçiti" #: ../../network.pm_.c:396 msgid "Gateway device" msgstr "Ağ geçiti aygıtı" #: ../../network.pm_.c:407 msgid "Proxies configuration" msgstr "Vekil sunucu ayarları" #: ../../network.pm_.c:408 msgid "HTTP proxy" msgstr "HTTP vekil sunucu" #: ../../network.pm_.c:409 msgid "FTP proxy" msgstr "FTP vekil sunucu" #: ../../network.pm_.c:412 msgid "Proxy should be http://..." msgstr "Vekil sunucu http://... şeklinde olmalı." #: ../../network.pm_.c:413 msgid "Proxy should be ftp://..." msgstr "Vekil sunucu ftp://... olmalı." #: ../../partition_table.pm_.c:560 msgid "Extended partition not supported on this platform" msgstr "Genişletilmiş bölüm bu platform tarafından desteklenmiyor" #: ../../partition_table.pm_.c:578 msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions" msgstr "" "Bölüm tablonuzda bir boşluk var ama kullanılamaz durumda.\n" "Bu boşluğu, birinci bölümünüzü en yakınındaki uzatılmış bölüme taşıyarak\n" "sorunu çözebilirsiniz." #: ../../partition_table.pm_.c:672 #, c-format msgid "Error reading file %s" msgstr "%s dosyası okunurken hata oluştu" #: ../../partition_table.pm_.c:679 #, c-format msgid "Restoring from file %s failed: %s" msgstr "%s dosyasından kurtarılmasında hata: %s" #: ../../partition_table.pm_.c:681 msgid "Bad backup file" msgstr "Hatalı yedekleme dosyası" #: ../../partition_table.pm_.c:703 #, c-format msgid "Error writing to file %s" msgstr "%s dosyasına yazarken hata oluştu" #: ../../partition_table_raw.pm_.c:161 msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random trash" msgstr "" #: ../../pkgs.pm_.c:24 msgid "must have" msgstr "alınmalı" #: ../../pkgs.pm_.c:25 msgid "important" msgstr "önemli" #: ../../pkgs.pm_.c:26 msgid "very nice" msgstr "çok hoş" #: ../../pkgs.pm_.c:27 msgid "nice" msgstr "güzel" #: ../../pkgs.pm_.c:28 msgid "maybe" msgstr "belki" #: ../../printer.pm_.c:20 msgid "Local printer" msgstr "Yerel Yazıcı" #: ../../printer.pm_.c:21 msgid "Remote printer" msgstr "Uzaktaki Yazıcı" #: ../../printer.pm_.c:23 msgid "Remote lpd server" msgstr "Uzaktaki lpd sunucusu" #: ../../printer.pm_.c:24 msgid "Network printer (socket)" msgstr "Ağ Yazıcısı (socket)" #: ../../printer.pm_.c:25 msgid "SMB/Windows 95/98/NT" msgstr "SMB/Windows 95/98/NT" #: ../../printer.pm_.c:26 msgid "NetWare" msgstr "NetWare" #: ../../printer.pm_.c:27 ../../printerdrake.pm_.c:158 #: ../../printerdrake.pm_.c:160 msgid "Printer Device URI" msgstr "Yazıcı Aygıtı URI'si" #: ../../printerdrake.pm_.c:19 msgid "Test ports" msgstr "Portları test et" #: ../../printerdrake.pm_.c:40 #, c-format msgid "A printer, model \"%s\", has been detected on " msgstr "\"%s\" modelinde bir yazıcı bulundu:" #: ../../printerdrake.pm_.c:52 msgid "Local Printer Device" msgstr "Yerel Yazıcı Aygıtı" #: ../../printerdrake.pm_.c:53 msgid "" "What device is your printer connected to \n" "(note that /dev/lp0 is equivalent to LPT1:)?\n" msgstr "" "Yazıcınız hengi aygıta bağlı? \n" "(/dev/lp0, LPT1'e karşılık gelir)\n" #: ../../printerdrake.pm_.c:55 msgid "Printer Device" msgstr "Yazıcı Aygıtı" #: ../../printerdrake.pm_.c:74 msgid "Remote lpd Printer Options" msgstr "Uzak Yazıcı (lpd) Seçenekleri" #: ../../printerdrake.pm_.c:75 msgid "" "To use a remote lpd print queue, you need to supply\n" "the hostname of the printer server and the queue name\n" "on that server which jobs should be placed in." msgstr "" "Uzaktaki bir lpd yazıcı kuyruğunu kullanmak için, \n" "yazıcının bağlı olduğu yazıcı sunucusunun adını ve kuyruk \n" "ismini vermeniz gerekmektedir." #: ../../printerdrake.pm_.c:78 msgid "Remote hostname" msgstr "Uzaktaki makina adı" #: ../../printerdrake.pm_.c:79 msgid "Remote queue" msgstr "Uzaktaki kuyruk adı" #: ../../printerdrake.pm_.c:88 msgid "SMB (Windows 9x/NT) Printer Options" msgstr "SMB (Windows 9x/NT) Yazıcı Seçenekleri" #: ../../printerdrake.pm_.c:89 msgid "" "To print to a SMB printer, you need to provide the\n" "SMB host name (Note! It may be different from its\n" "TCP/IP hostname!) and possibly the IP address of the print server, as\n" "well as the share name for the printer you wish to access and any\n" "applicable user name, password, and workgroup information." msgstr "" "Bir SMB yazıcıdan çıktı almak için, SMB makina adı, yazıcı sunucunun \n" "IP adresi, yazıcının paylaşım adı, çalışma grubu, kullanıcı adı ve \n" "parola verilmelidir." #: ../../printerdrake.pm_.c:94 msgid "SMB server host" msgstr "SMB sunucu adı" #: ../../printerdrake.pm_.c:95 msgid "SMB server IP" msgstr "SMB sunucu IP" #: ../../printerdrake.pm_.c:96 msgid "Share name" msgstr "Paylaşım adı" #: ../../printerdrake.pm_.c:99 msgid "Workgroup" msgstr "Çalışma grubu" #: ../../printerdrake.pm_.c:124 msgid "NetWare Printer Options" msgstr "NetWare Yazıcı Ayarları" #: ../../printerdrake.pm_.c:125 msgid "" "To print to a NetWare printer, you need to provide the\n" "NetWare print server name (Note! it may be different from its\n" "TCP/IP hostname!) as well as the print queue name for the printer you\n" "wish to access and any applicable user name and password." msgstr "" "NetWare yazıcıdan çıktı almak için, NetWare sunucunun adı ve yazıcı \n" "kuyruğu adı ile kullanıcı adı ve parolası verilmelidir." #: ../../printerdrake.pm_.c:129 msgid "Printer Server" msgstr "Yazıcı Sunucusu" #: ../../printerdrake.pm_.c:130 msgid "Print Queue Name" msgstr "Yazıcı Kuyruk Adı" #: ../../printerdrake.pm_.c:142 msgid "Socket Printer Options" msgstr "Socket Yazıcısı Ayarları" #: ../../printerdrake.pm_.c:143 msgid "" "To print to a socket printer, you need to provide the\n" "hostname of the printer and optionally the port number." msgstr "" "Bir socket yazıcısından çıktı alabilmek için, yazıcının sunucu-adını\n" "ve seçimlik olarak kapı numarasını vermeniz gereklidir." #: ../../printerdrake.pm_.c:145 msgid "Printer Hostname" msgstr "Yazıcının Adı" #: ../../printerdrake.pm_.c:146 ../../printerdrake.pm_.c:422 msgid "Port" msgstr "Kapı" #: ../../printerdrake.pm_.c:159 msgid "You can specify directly the URI to access the printer with CUPS." msgstr "CUPS ile yazıcınıza erişebilmek için doğrudan URI'yi belirlemelisiniz." #: ../../printerdrake.pm_.c:192 ../../printerdrake.pm_.c:244 msgid "What type of printer do you have?" msgstr "Ne tip bir yazıcınız var?" #: ../../printerdrake.pm_.c:204 ../../printerdrake.pm_.c:305 msgid "Do you want to test printing?" msgstr "Yazıcıyı denemek istiyor musunuz?" #: ../../printerdrake.pm_.c:207 ../../printerdrake.pm_.c:316 msgid "Printing test page(s)..." msgstr "Deneme sayfası basılıyor..." #: ../../printerdrake.pm_.c:214 ../../printerdrake.pm_.c:324 #, c-format msgid "" "Test page(s) have been sent to the printer daemon.\n" "This may take a little time before printer start.\n" "Printing status:\n" "%s\n" "\n" "Does it work properly?" msgstr "" "Test sayfası yazıcı daemonuna gönderildi.\n" "Yazıcının çalışması için az bir zaman geçebilir.\n" "Yazdırma statüsü:\n" "%s\n" "\n" "Düzgün olarak çalışıyor mu?" #: ../../printerdrake.pm_.c:218 ../../printerdrake.pm_.c:328 msgid "" "Test page(s) have been sent to the printer daemon.\n" "This may take a little time before printer start.\n" "Does it work properly?" msgstr "" "Test sayfası yazıcı daemonuna gönderildi.\n" "Yazıcının çalışması için az bir zaman geçebilir.\n" "Düzgün olarak çalışıyor mu?" #: ../../printerdrake.pm_.c:234 msgid "Yes, print ASCII test page" msgstr "Evet, ASCII deneme sayfası bastır" #: ../../printerdrake.pm_.c:235 msgid "Yes, print PostScript test page" msgstr "Eve, Postscript deneme sayfası bastır" #: ../../printerdrake.pm_.c:236 msgid "Yes, print both test pages" msgstr "Evet, her iki deneme sayfasını da bastır" #: ../../printerdrake.pm_.c:243 msgid "Configure Printer" msgstr "Yazıcı Ayarları" #: ../../printerdrake.pm_.c:273 msgid "Printer options" msgstr "Yazıcı seçenekleri" #: ../../printerdrake.pm_.c:274 msgid "Paper Size" msgstr "Kağıt boyutu" #: ../../printerdrake.pm_.c:275 msgid "Eject page after job?" msgstr "İş bittikten sonra sayfa atılsın mı?" #: ../../printerdrake.pm_.c:280 msgid "Uniprint driver options" msgstr "Uniprint sürücü seçenekleri" #: ../../printerdrake.pm_.c:281 msgid "Color depth options" msgstr "Renk derinlik seçenekleri" #: ../../printerdrake.pm_.c:283 msgid "Print text as PostScript?" msgstr "Metni PostScript olarak yazdırsın mı?" #: ../../printerdrake.pm_.c:285 msgid "Fix stair-stepping text?" msgstr "Metin basamak etkisi düzeltilsin mi?" #: ../../printerdrake.pm_.c:287 msgid "Number of pages per output pages" msgstr "Çıktı sayfası sayısı" #: ../../printerdrake.pm_.c:288 msgid "Right/Left margins in points (1/72 of inch)" msgstr "Sağ/Sol boşluklar nokta halinde (inch'in 1/72'si" #: ../../printerdrake.pm_.c:289 msgid "Top/Bottom margins in points (1/72 of inch)" msgstr "Üst/Alt boşluklar nokta halinde (inch'in 1/72'si" #: ../../printerdrake.pm_.c:291 msgid "Extra GhostScript options" msgstr "Fazladan GhostScript seçenekleri" #: ../../printerdrake.pm_.c:293 msgid "Extra Text options" msgstr "Ekstra metin seçenekleri" #: ../../printerdrake.pm_.c:295 msgid "Reverse page order" msgstr "Ters sayfa sıralaması" #: ../../printerdrake.pm_.c:345 msgid "Would you like to configure a printer?" msgstr "Bir yazıcı ayarlamak istiyor musunuz?" #: ../../printerdrake.pm_.c:351 msgid "" "Here are the following print queues.\n" "You can add some more or change the existing ones." msgstr "" "Aşağıda yazıcı kuyrukları verilmiştir.\n" "Yenilerini ekleyebilir, veya mevcut olanları değiştirebilirsiniz." #: ../../printerdrake.pm_.c:370 msgid "CUPS starting" msgstr "CUPS çalıştırılıyor" #: ../../printerdrake.pm_.c:370 msgid "Reading CUPS drivers database..." msgstr "CUPS sürücü veri tabanı okunuyor..." #: ../../printerdrake.pm_.c:384 ../../printerdrake.pm_.c:450 #: ../../printerdrake.pm_.c:471 ../../printerdrake.pm_.c:479 msgid "Select Printer Connection" msgstr "Yazıcı Bağlantısı Seçin" #: ../../printerdrake.pm_.c:385 ../../printerdrake.pm_.c:472 msgid "How is the printer connected?" msgstr "Yazıcınız ne şekilde bağlı?" #: ../../printerdrake.pm_.c:392 msgid "Select Remote Printer Connection" msgstr "Uzaktaki Yazıcı Bağlantısını Seçin" #: ../../printerdrake.pm_.c:393 msgid "" "With a remote CUPS server, you do not have to configure\n" "any printer here; printers will be automatically detected.\n" "In case of doubt, select \"Remote CUPS server\"." msgstr "" "Uzak bir CUPS sunucusuyla, hiçbir yazıcıyı yapılandırmanız\n" "gerekmemekte; her türlü yazıcı otomatik olarak bulunacaktır.\n" "Emin değilseniz \"Uzak CUPS sunucusu\"'nu seçin." #: ../../printerdrake.pm_.c:416 #, fuzzy msgid "" "With a remote CUPS server, you do not have to configure\n" "any printer here; printers will be automatically detected\n" "unless you have a server on a different network; in the\n" "latter case, you have to give the CUPS server IP address\n" "and optionally the port number." msgstr "" "Uzak bir CUPS sunucusuyla, hiçbir yazıcıyı yapılandırmanız\n" "gerekmemekte; her türlü yazıcı otomatik olarak bulunacaktır.\n" "Emin değilseniz \"Uzak CUPS sunucusu\"'nu seçin." #: ../../printerdrake.pm_.c:421 #, fuzzy msgid "CUPS server IP" msgstr "SMB sunucu IP" #: ../../printerdrake.pm_.c:429 msgid "Port number should be numeric" msgstr "" #: ../../printerdrake.pm_.c:451 ../../printerdrake.pm_.c:480 msgid "Remove queue" msgstr "Kuyruğu sil" #: ../../printerdrake.pm_.c:454 msgid "" "Name of printer should contains only letters, numbers and the underscore" msgstr "" #: ../../printerdrake.pm_.c:461 msgid "" "Every printer need a name (for example lp).\n" "Other parameters such as the description of the printer or its location\n" "can be defined. What name should be used for this printer and\n" "how is the printer connected?" msgstr "" "Her yazıcı için bir isim gereklidir (örneğin lp).\n" "Yazıcının tanımı ya da konumu gibi diğer parametreler de belirtilebilir.\n" "Bu yazıcı için hangi adı kullanmak istiyorsunuz ve bu yazıcı makinanıza\n" "hangi yolla bağlanmış durumda?" #: ../../printerdrake.pm_.c:465 msgid "Name of printer" msgstr "Yazıcının adı" #: ../../printerdrake.pm_.c:466 msgid "Description" msgstr "Tanım" #: ../../printerdrake.pm_.c:467 msgid "Location" msgstr "Konum" #: ../../printerdrake.pm_.c:482 msgid "" "Every print queue (which print jobs are directed to) needs a\n" "name (often lp) and a spool directory associated with it. What\n" "name and directory should be used for this queue and how is the printer " "connected?" msgstr "" "Her yazıcı kuyruğu (yazdırma işlerinin yollandığı yer) bir isme \n" "(genelde lp) ve bekleme dizinine ihtiyaç duyar. Bu kuyruk için \n" "hangi isim ve dizin kullanılsın, ve yazıcı makinanıza hangi yolla\n" "bağlanmış?" #: ../../printerdrake.pm_.c:489 msgid "Name of queue" msgstr "Kuyruğun ismi" #: ../../printerdrake.pm_.c:490 msgid "Spool directory" msgstr "Bekleme dizini" #: ../../printerdrake.pm_.c:491 msgid "Printer Connection" msgstr "Yazıcı Bağlantısı" #: ../../raid.pm_.c:33 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "Biçimlendirilmiş RAID md%d'ye disk bölümü eklenemedi" #: ../../raid.pm_.c:103 msgid "Can't write file $file" msgstr "$file dosyasına yazılamadı" #: ../../raid.pm_.c:128 msgid "mkraid failed" msgstr "mkraid başarısız" #: ../../raid.pm_.c:128 msgid "mkraid failed (maybe raidtools are missing?)" msgstr "mkraid başarısız (raidtools eksik olabilir mi?" #: ../../raid.pm_.c:144 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "%d seviye RAID için yetersiz sayıda disk bölümü\n" #: ../../services.pm_.c:16 msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "" #: ../../services.pm_.c:17 msgid "Anacron a periodic command scheduler." msgstr "Anacron, periyodik komut zamanlayıcısı" #: ../../services.pm_.c:18 msgid "" "apmd is used for monitoring batery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "apmd pil durumunu izlemek için ve syslog aracılığıyla bunun kaydını tutmak " "için kullanılır.\n" "Ayrıca pil azaldığında sistemi kapatmak için de kullanılır." #: ../../services.pm_.c:20 msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "at komutu, zamanlanan komutları çalışmaları gereken zamanlarda çalıştırır.\n" "Sistem yükü yeterince düşük olduğunda yığın komutları çalıştırır." #: ../../services.pm_.c:22 msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "cron, kullanıcılara özel komutları peritodik zamanlamalarla çalıştırabilen\n" "standart bir UNIX programıdır. vixie cron, standart cron'a eklenmiş birçok\n" "yeni özellik içerir." #: ../../services.pm_.c:25 msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM, Midnight Commander gibi metin tabanlı uygulamalara fare desteği ekler.\n" "Ayrıca konsolda fareyle kesme ve yapıştırma işlemlerine izin verir.\n" "Konsolda pop-up menü desteği sağlar." #: ../../services.pm_.c:28 msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" #: ../../services.pm_.c:30 msgid "" "Apache is a World Wide Web server. It is used to serve HTML files\n" "and CGI." msgstr "" "Apache bir World Wide Web sunucusudur. HTML dosyaları ve CGI sunumu için " "kullanılır." #: ../../services.pm_.c:32 msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "Internet superserver daemon (çoğunlukla inetd olarak adlandırılır) birçok \n" "başka internet servisini gerektiğinde çalıştırır. İçinde telnet, ftp, rsh ve " "rlogin gibi pekçok programın bulunduğu servisleri çalıştırmakla yükümlüdür.\n" "inetd'yi sistemden çıkarmak, onun çalıştırmakla yükümlü olduğu bütün " "servisleri \n" "kaldırmak anlamına gelir." #: ../../services.pm_.c:36 msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" #: ../../services.pm_.c:38 msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "Bu paket /etc/sysconfig/keyboard'daki seçili klavye düzenini yükler.\n" "Hangi klavye düzeninin kullanılıcağı kbdconfig ile ayarlanabilir.\n" "Bu, mandrake kurulan birçok makinede etkin olarak bırakılmalıdır." #: ../../services.pm_.c:41 msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" #: ../../services.pm_.c:43 msgid "Automatic detection and configuration of hardware at boot." msgstr "" #: ../../services.pm_.c:44 msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" #: ../../services.pm_.c:46 msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd, lpr'nin düzgün olarak çalışması için gerekli yazıcı daemonudur.\n" "lpd temel olarak, yazdırma görevlerini yöneten ve onları yazıcıya gönderen " "sunucudur." #: ../../services.pm_.c:48 msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" #: ../../services.pm_.c:50 msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve\n" "host names to IP addresses." msgstr "" "named (BIND) sunucu isimlerini IP adreslerine dönüştüren \n" "Alan Adı Sunucusudur (DNS)." #: ../../services.pm_.c:52 msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "Bütün Ağ Dosya Sistemlerini (NFS), SMB (Lan Manager/Windows), ve \n" "NCP (NetWare) bağlama noktalarını bağlar ve ayırır." #: ../../services.pm_.c:54 msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "Açılış sırasında başlamak için ayarlanmış bütün ağ arayüzlerini aktive " "eder/kapatır." #: ../../services.pm_.c:56 msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS TCP/IP ağlarda dosya paylaşımı için kullanılan popüler bir protokoldür.\n" "Bu servis, /etc/exports dosyasında ayarları bulunan NFS sunucusunun \n" "kullanımını sağlar." #: ../../services.pm_.c:59 msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS TCP/IP ağlarda dosya paylaşımı için kullanılan popüler bir \n" "protokoldür. Bu servis NFS dosya kilidi kullanımını sağlar." #: ../../services.pm_.c:61 msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" #: ../../services.pm_.c:63 msgid "Support the OKI 4w and compatible winprinters." msgstr "" #: ../../services.pm_.c:64 msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" "PCMCIA desteği, laptoplarda ethernet ve modem gibi aygıtların " "desteklernmesini\n" "sağlar. Ayarlanmadığı sürece açılışta çalışmayacaktır, çalışmasına ihtiyaç " "duyulmayan \n" "makinalarda kurulu olması sorun oluşturmayacaktır." #: ../../services.pm_.c:67 msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "portmapper, NFS ve NIS gibi protokoller tarafından kullanılan RPC \n" "bağlantılarını düzenler. Portmap sunucusu RPC mekanizmasını kullanan\n" "protokollerle servis yapan makinelerde kurulu ve çalışıyor durumda olmalıdır." #: ../../services.pm_.c:70 msgid "" "Postfix is a Mail Transport Agent, which is the program that\n" "moves mail from one machine to another." msgstr "" "Posfiz, elektronik postaları bir makinadan diğerine yollayan \n" "Elektronik Posta Aktarma Görevlisidir." #: ../../services.pm_.c:72 msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "Yüksek kalite rastgele sayı üretimi için sistem entropi havuzunun \n" "saklanması ve yeniden eski haline getirilmesini sağlar." #: ../../services.pm_.c:74 msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle" msgstr "" #: ../../services.pm_.c:76 msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "routed daemonu otomatik IP router tablosunun RIP protokolü tarafından\n" "yenilenmesine izin verir. RIP genelde küşük ağlarda kullanılır, daha büyük\n" "ağlarda daha karmaşık routing protokollerine ihtiyaç vardır." #: ../../services.pm_.c:79 msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "rstat protokolü bir ağdaki kullanıcıların o ağdaki herhangi bir\n" "makina hakkında performans ölçüleri alabilmelerini sağlar." #: ../../services.pm_.c:81 msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "rusers protokolü bir ağdaki kullanıcıların o ağda bulunan makinalarda\n" "çalışan kullanıcıları görmenizi sağlar." #: ../../services.pm_.c:83 msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" "rwho protokolü, uzak kullanıcıların, rwho daemonu çalıştıran bir makinada\n" "bulunan tüm kullanıcıları görmelerine izin verir." #: ../../services.pm_.c:85 #, fuzzy msgid "Launch the sound system on your machine" msgstr "X-Window sistemini her başlangıçta çalıştır" #: ../../services.pm_.c:86 msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "Syslog, birçok daemonun mesajlarını çeşitli sistem kayıt dosyalarında\n" "tutmalarına izin verir. Syslog'un her zaman çalışır durumda olması\n" "akıllıca bir davranıştır." #: ../../services.pm_.c:88 msgid "Load the drivers for your usb devices." msgstr "" #: ../../services.pm_.c:89 #, fuzzy msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "X Font Sunucusu'nu açılışta çalıştırır ve makina kapanırken durdurur." #: ../../services.pm_.c:118 msgid "Choose which services should be automatically started at boot time" msgstr "Açılış sırasında otomatik olarak başlayacak servisleri seçin" #: ../../services.pm_.c:137 #, fuzzy msgid "running" msgstr "Uyarı" #: ../../services.pm_.c:137 #, fuzzy msgid "stopped" msgstr "Sonuna ekle" #: ../../services.pm_.c:151 msgid "Services and deamons" msgstr "" #: ../../services.pm_.c:156 msgid "" "No additionnal information\n" "about this service, sorry." msgstr "" #: ../../services.pm_.c:163 #, fuzzy msgid "On boot" msgstr "Kök" #: ../../standalone/diskdrake_.c:67 msgid "" "I can't read your partition table, it's too corrupted for me :(\n" "I'll try to go on blanking bad partitions" msgstr "" "Bölüm tablonuzu okuyamıyorum, galiba biraz bozulmuş :-(\n" "Bozulmuş bolümleri düzeltmeye çalışacağım" #: ../../standalone/drakgw_.c:37 ../../standalone/drakgw_.c:180 msgid "Internet Connection Sharing" msgstr "İnternet Bağlantısı Paylaşımı" #: ../../standalone/drakgw_.c:118 msgid "Internet Connection Sharing currently enabled" msgstr "İnternet Bağlantısı Paylaşımı şu anda etkin" #: ../../standalone/drakgw_.c:119 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "İnternet bağlantısı paylaşımı ayarları zaten yapılmış durumda.\n" "Paylaşım şu anda etkin.\n" "\n" "Ne yapmak istersiniz?" #: ../../standalone/drakgw_.c:123 msgid "disable" msgstr "iptal et" #: ../../standalone/drakgw_.c:123 ../../standalone/drakgw_.c:148 msgid "dismiss" msgstr "vazgeç" #: ../../standalone/drakgw_.c:123 ../../standalone/drakgw_.c:148 msgid "reconfigure" msgstr "yeniden ayarla" #: ../../standalone/drakgw_.c:126 #, fuzzy msgid "Disabling servers..." msgstr "Aygıtlar taranıyor..." #: ../../standalone/drakgw_.c:134 #, fuzzy msgid "Internet connection sharing is now disabled." msgstr "İnternet bağlantısı paylaşımı şu anda etkin değil" #: ../../standalone/drakgw_.c:143 msgid "Internet Connection Sharing currently disabled" msgstr "İnternet bağlantısı paylaşımı şu anda etkin değil" #: ../../standalone/drakgw_.c:144 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "İnternet bağlantısı paylaşımı ayarları zaten yapılmış durumda.\n" "Paylaşım şu anda etkin değil.\n" "\n" "Ne yapmak istersiniz?" #: ../../standalone/drakgw_.c:148 msgid "enable" msgstr "etkinleştir" #: ../../standalone/drakgw_.c:155 msgid "Enabling servers..." msgstr "" #: ../../standalone/drakgw_.c:160 #, fuzzy msgid "Internet connection sharing is now enabled." msgstr "İnternet Bağlantısı Paylaşımı şu anda etkin" #: ../../standalone/drakgw_.c:168 msgid "Config file content could not be interpreted." msgstr "Ayar dosyasının içeriği yorumlanamadı." #: ../../standalone/drakgw_.c:168 msgid "Unrecognized config file" msgstr "" #: ../../standalone/drakgw_.c:181 #, fuzzy msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "Bilgisayarınız internet bağlantısını paylaşmak için ayarlanabilir.\n" "\n" "Not: Yerel ağınızı ayarlamak için bir ağ bağdaştırıcısına ihtiyacınız var.\n" "\n" "İnternet bağlantısı paylaşımını yapılandırmak ister misiniz?" #: ../../standalone/drakgw_.c:207 #, c-format msgid "Interface %s (using module %s)" msgstr "" #: ../../standalone/drakgw_.c:208 #, fuzzy, c-format msgid "Interface %s" msgstr "İnternet" #: ../../standalone/drakgw_.c:216 msgid "No network adapter on your system!" msgstr "Sisteminizde ağ bağdaştırıcısı bulunamadı!" #: ../../standalone/drakgw_.c:217 msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "Sisteminizde ethernet ağ bağdaştırıcısı bulunamadı. Lütfen donanım ayar " "aracını çalıştırın." #: ../../standalone/drakgw_.c:224 #, fuzzy, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "Sisteminizde sadece bir ağ bağdaştırıcısı bulunuyor:\n" "\n" "$interface\n" "\n" "Yerel ağınızı bu bağdaştırıcıyla yapılandırmak ister misiniz?" #: ../../standalone/drakgw_.c:233 msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "Lütfen hangi ağ bağdaştırıcısının yerel ağınıza bağlanacağını seçin." #: ../../standalone/drakgw_.c:242 #, fuzzy msgid "" "Warning, the network adapter is already configured. I will reconfigure it." msgstr "" "Uyarı, ağ bağdaştırıcısı zaten yapılandırılmış.\n" "Tekrar yapılandırmak ister misiniz?" #: ../../standalone/drakgw_.c:253 msgid "Potential LAN address conflict found in current config of $_!\n" msgstr "$_! ayarlarında muhtemel bir yerel ağ adresi çakışması bulundu\n" #: ../../standalone/drakgw_.c:261 ../../standalone/drakgw_.c:267 msgid "Firewalling configuration detected!" msgstr "Bir ateş duvarı yapılandırılması bulundu!" #: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268 msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fix after installation." msgstr "" "Uyarı! Hazır bir ateş duvarı yapılandırması bulundu. Kurulumdan sonra birkaç " "düzeltmeye ihtiyaç duyabilir." #: ../../standalone/drakgw_.c:276 msgid "Configuring..." msgstr "Yapılandırılıyor..." #: ../../standalone/drakgw_.c:277 msgid "Configuring scripts, installing software, starting servers..." msgstr "Betikler ayarlanıyor, yazılım kuruluyor, sunucular başlatılıyor..." #: ../../standalone/drakgw_.c:307 msgid "Problems installing package $_" msgstr "$_ paketi kurulumunda problem" #: ../../standalone/drakgw_.c:590 msgid "Congratulations!" msgstr "Tebrikler!" #: ../../standalone/drakgw_.c:591 msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" "Tüm ayarlar tamam.\n" "Şimdi internet bağlantısını otomatik ağ yapılandırılması (DHCP) ile yerel " "ağınızdaki başka bilgisayarlara paylaştırabilirsiniz." #: ../../standalone/drakgw_.c:608 #, fuzzy msgid "The setup has already been done, but it's currently disabled." msgstr "" "İnternet bağlantısı paylaşımı ayarları zaten yapılmış durumda.\n" "Paylaşım şu anda etkin değil.\n" "\n" "Ne yapmak istersiniz?" #: ../../standalone/drakgw_.c:609 #, fuzzy msgid "The setup has already been done, and it's currently enabled." msgstr "" "İnternet bağlantısı paylaşımı ayarları zaten yapılmış durumda.\n" "Paylaşım şu anda etkin.\n" "\n" "Ne yapmak istersiniz?" #: ../../standalone/drakgw_.c:610 #, fuzzy msgid "No Internet Connection Sharing has ever been configured." msgstr "İnternet Bağlantısı Paylaşımı şu anda etkin" #: ../../standalone/drakgw_.c:615 #, fuzzy msgid "Internet connection sharing configuration" msgstr "İnternet bağlantısı & ayarları" #: ../../standalone/drakgw_.c:622 #, fuzzy, c-format msgid "" "Welcome to the Internet Connection Sharing utility!\n" "\n" "%s\n" "\n" "Click on Configure to launch the setup wizard." msgstr "İnternet Bağlantısı Paylaşımı" #: ../../standalone/draknet_.c:59 #, fuzzy, c-format msgid "Network configuration (%d adapters)" msgstr "Ağ Yapılandırması" #: ../../standalone/draknet_.c:66 ../../standalone/draknet_.c:537 #, fuzzy msgid "Profile: " msgstr "bağlama başarısız: " #: ../../standalone/draknet_.c:74 msgid "Del profile..." msgstr "" #: ../../standalone/draknet_.c:80 msgid "Profile to delete:" msgstr "" #: ../../standalone/draknet_.c:108 msgid "New profile..." msgstr "" #: ../../standalone/draknet_.c:114 msgid "Name of the profile to create:" msgstr "" #: ../../standalone/draknet_.c:140 #, fuzzy msgid "Hostname: " msgstr "Makina adı:" #: ../../standalone/draknet_.c:147 #, fuzzy msgid "Internet access" msgstr "İnternet" #: ../../standalone/draknet_.c:160 #, fuzzy msgid "Type:" msgstr "Tip: " #: ../../standalone/draknet_.c:163 ../../standalone/draknet_.c:354 msgid "Gateway:" msgstr "Ağ geçiti:" #: ../../standalone/draknet_.c:163 ../../standalone/draknet_.c:354 #, fuzzy msgid "Interface:" msgstr "İnternet" #: ../../standalone/draknet_.c:168 msgid "Status:" msgstr "" #: ../../standalone/draknet_.c:170 ../../standalone/draknet_.c:357 #: ../../standalone/net_monitor_.c:122 ../../standalone/net_monitor_.c:224 #, fuzzy msgid "Connected" msgstr "Bağlantı adı" #: ../../standalone/draknet_.c:170 ../../standalone/draknet_.c:357 #: ../../standalone/net_monitor_.c:83 ../../standalone/net_monitor_.c:122 #: ../../standalone/net_monitor_.c:224 #, fuzzy msgid "Not connected" msgstr "ADSL ayarları" #: ../../standalone/draknet_.c:173 ../../standalone/draknet_.c:358 msgid "Connect..." msgstr "" #: ../../standalone/draknet_.c:173 ../../standalone/draknet_.c:358 msgid "Disconnect..." msgstr "" #: ../../standalone/draknet_.c:191 #, fuzzy msgid "Starting your connection..." msgstr "Bağlantınız test ediliyor..." #: ../../standalone/draknet_.c:199 #, fuzzy msgid "Closing your connection..." msgstr "Bağlantınız test ediliyor..." #: ../../standalone/draknet_.c:204 msgid "" "The connection is not closed.\n" "Try to do it manually by running\n" "/etc/sysconfig/network-scripts/net_cnx_down\n" "in root." msgstr "" #: ../../standalone/draknet_.c:207 #, fuzzy msgid "The system is now disconnected." msgstr "Sistem şu anda internete bağlı." #: ../../standalone/draknet_.c:219 #, fuzzy msgid "Configure Internet Access..." msgstr "Servis ayarları" #: ../../standalone/draknet_.c:226 ../../standalone/draknet_.c:409 #, fuzzy msgid "LAN configuration" msgstr "ADSL ayarları" #: ../../standalone/draknet_.c:231 #, fuzzy msgid "Adapter" msgstr "Güncelleme" #: ../../standalone/draknet_.c:231 #, fuzzy msgid "Driver" msgstr "Sunucu" #: ../../standalone/draknet_.c:231 #, fuzzy msgid "Interface" msgstr "İnternet" #: ../../standalone/draknet_.c:231 #, fuzzy msgid "Protocol" msgstr "Boot Protokolü" #: ../../standalone/draknet_.c:250 msgid "Configure Local Area Network..." msgstr "Yerel ağı yapılandır.." #: ../../standalone/draknet_.c:283 msgid "Normal Mode" msgstr "Normal Kip" #: ../../standalone/draknet_.c:288 msgid "Apply" msgstr "" #: ../../standalone/draknet_.c:307 msgid "Please Wait... Applying the configuration" msgstr "Lütfen Bekleyiniz... Yapılandırmalar aktifleştiriliyor" #: ../../standalone/draknet_.c:389 msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" #: ../../standalone/draknet_.c:413 msgid "LAN Configuration" msgstr "LAN ayarları" #: ../../standalone/draknet_.c:421 #, c-format msgid "Adapter %s: %s" msgstr "Adaptör %s: %s" #: ../../standalone/draknet_.c:427 msgid "Boot Protocol" msgstr "Boot Protokolü" #: ../../standalone/draknet_.c:428 msgid "Started on boot" msgstr "Boot edilince başlatılan" #: ../../standalone/draknet_.c:429 msgid "DHCP client" msgstr "DHCP Clent" #: ../../standalone/draknet_.c:464 ../../standalone/draknet_.c:468 msgid "Disable" msgstr "Iptal et" #: ../../standalone/draknet_.c:464 ../../standalone/draknet_.c:468 msgid "Enable" msgstr "Etkinleştir" #: ../../standalone/draknet_.c:502 msgid "" "You don't have any internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" #: ../../standalone/draknet_.c:526 msgid "Internet connection configuration" msgstr "İnternet bağlantısı ayarları" #: ../../standalone/draknet_.c:530 msgid "Internet Connection Configuration" msgstr "İnternet bağlantısı ayarları" #: ../../standalone/draknet_.c:539 msgid "Connection type: " msgstr "Bağlantı türü: " #: ../../standalone/draknet_.c:545 msgid "Parameters" msgstr "Paremetreler" #: ../../standalone/draknet_.c:558 msgid "Provider dns 1 (optional)" msgstr "1. Alan adı sunucusu" #: ../../standalone/draknet_.c:559 msgid "Provider dns 2 (optional)" msgstr "2. Alan adı sunucusu" #: ../../standalone/draknet_.c:572 msgid "Ethernet Card" msgstr "" #: ../../standalone/draknet_.c:573 msgid "DHCP Client" msgstr "" #: ../../standalone/draksec_.c:21 msgid "Welcome To Crackers" msgstr "Crackerlar hoşgeldiniz" #: ../../standalone/draksec_.c:22 msgid "Poor" msgstr "Zayıf" #: ../../standalone/draksec_.c:26 msgid "Paranoid" msgstr "Paranoyak" #: ../../standalone/draksec_.c:29 msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive: it must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "Bu seviye RAID'i dikkatli kullanmanızı öneririz. Sisteminiz daha kolay \n" "kullanılacak, ancak hatalara karşı da duyarlılığı artacaktır. İnternet'e \n" "bağlıysanız bu seçimi yapmanızı önermiyoruz. Parola erişimi bulunmamaktadır." #: ../../standalone/draksec_.c:32 msgid "" "Password are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "Parolalar etkinleştirildi, yine de bir ağ üzerinde kullanmamanız tavsiye " "edilir." #: ../../standalone/draksec_.c:33 msgid "" "Few improvements for this security level, the main one is that there are\n" "more security warnings and checks." msgstr "" "Bu güvenlik seviyesi için ek olarak daha fazla güvenlik uyarısı ve \n" "denetlemesi bulunur." #: ../../standalone/draksec_.c:35 msgid "" "This is the standard security recommended for a computer that will be used\n" "to connect to the Internet as a client. There are now security checks. " msgstr "" "İnternet'e bağlı bir makina için standart ve önerilen bir güvenlik " "seviyesidir." #: ../../standalone/draksec_.c:37 msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which accept\n" "connections from many clients. " msgstr "" "Bu güvenlik seviyesiyle sistemin bir sunucu olarak kullanımı mümkündür. \n" "Güvenlik, birden fazla istemcinin bağlanmasına izin verecek şekilde " "artırılmıştır. " #: ../../standalone/draksec_.c:40 msgid "" "We take level 4 features, but now the system is entirely closed.\n" "Security features are at their maximum." msgstr "Sistem dışarıdan gelecek bağlantılara karşı tamamen kapalıdır." #: ../../standalone/draksec_.c:52 msgid "Setting security level" msgstr "Güvenlik seviyesinin ayarlanması" #: ../../standalone/drakxconf_.c:44 msgid "Control Center" msgstr "Denetim Merkezi" #: ../../standalone/drakxconf_.c:45 msgid "Choose the tool you want to use" msgstr "Kullanmak istediğiniz araçları seçin" #: ../../standalone/keyboarddrake_.c:16 msgid "usage: keyboarddrake [--expert] [keyboard]\n" msgstr "kullanım: keyboarddrake [--expert] [klavye]\n" #: ../../standalone/keyboarddrake_.c:36 msgid "Do you want the BackSpace to return Delete in console?" msgstr "Konsolda BackSpace duşunun Silme işlemi yapmasını ister misiniz?" #: ../../standalone/livedrake_.c:23 msgid "Change Cd-Rom" msgstr "Cd-rom'u değiştir" #: ../../standalone/livedrake_.c:24 msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" "Lütfen kurulum CD'sini sürücünüze yerleştirin ve sonra Tamam'a basın.\n" "Eğer elinizde yoksa, canlı güncellemeden vazgeçmek için Vazgeç'e basın." #: ../../standalone/livedrake_.c:34 msgid "Unable to start live upgrade !!!\n" msgstr "Canlı güncelleme başlatılamıyor !!!\n" #: ../../standalone/mousedrake_.c:39 msgid "no serial_usb found\n" msgstr "bir seri_usb aygıtı bulunamadı\n" #: ../../standalone/mousedrake_.c:43 msgid "Emulate third button?" msgstr "3 tuş öykünümü?" #: ../../standalone/net_monitor_.c:40 ../../standalone/net_monitor_.c:52 #, fuzzy msgid "Network Monitoring" msgstr "Ağ Yapılandırması" #: ../../standalone/net_monitor_.c:56 msgid "Statistics" msgstr "" #: ../../standalone/net_monitor_.c:59 msgid "Sending Speed: " msgstr "" #: ../../standalone/net_monitor_.c:61 msgid "Receiving Speed: " msgstr "" #: ../../standalone/net_monitor_.c:66 #, fuzzy msgid "Close" msgstr "USB Fare" #: ../../standalone/net_monitor_.c:100 ../../standalone/net_monitor_.c:104 #, fuzzy msgid "Connecting to Internet " msgstr "İnternete Bağlan" #: ../../standalone/net_monitor_.c:100 ../../standalone/net_monitor_.c:104 #, fuzzy msgid "Disconnecting from Internet " msgstr "İnternetten Çık" #: ../../standalone/net_monitor_.c:114 #, fuzzy msgid "Disconnection from Internet failed." msgstr "İnternetten Çık" #: ../../standalone/net_monitor_.c:115 #, fuzzy msgid "Disconnection from Internet complete." msgstr "İnternetten Çık" #: ../../standalone/net_monitor_.c:117 #, fuzzy msgid "Connection complete." msgstr "Bağlantı adı" #: ../../standalone/net_monitor_.c:118 msgid "" "Connection failed.\n" "Verify your configuration in the Mandrake Control Center." msgstr "" #: ../../standalone/net_monitor_.c:188 msgid "sent: " msgstr "" #: ../../standalone/net_monitor_.c:191 msgid "received: " msgstr "" #: ../../standalone/net_monitor_.c:222 #, fuzzy msgid "Connect" msgstr "Bağlantı adı" #: ../../standalone/net_monitor_.c:222 #, fuzzy msgid "Disconnect" msgstr "Bir ISDN bağlantısı yapılandır" #: ../../standalone/tinyfirewall_.c:29 msgid "Firewalling Configuration" msgstr "Ateşten Duvar Ayarları" #: ../../standalone/tinyfirewall_.c:42 msgid "Firewalling configuration" msgstr "Ateşten Duvar Ayarları" #: ../../standalone/tinyfirewall_.c:77 msgid "" "Firewalling\n" "\n" "You already have set up a firewall.\n" "Click on Configure to change or remove the firewall" msgstr "" #: ../../standalone/tinyfirewall_.c:81 msgid "" "Firewalling\n" "\n" "Click on Configure to set up a standard firewall" msgstr "" "Ateş Duvarı Kuruluyor\n" "Ayarlara tıklayın ve standart bir ateş duvarı olacağını ayarlayın" #: ../../tinyfirewall.pm_.c:10 msgid "" "tinyfirewall configurator\n" "\n" "This configures a personal firewall for this Linux Mandrake machine.\n" "For a powerful dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" #: ../../tinyfirewall.pm_.c:15 msgid "" "We'll now ask you questions about which services you'd like to allow\n" "the Internet to connect to. Please think carefully about these\n" "questions, as your computer's security is important.\n" "\n" "Please, if you're not currently using one of these services, firewall\n" "it off. You can change this configuration anytime you like by\n" "re-running this application!" msgstr "" #: ../../tinyfirewall.pm_.c:22 msgid "" "Are you running a web server on this machine that you need the whole\n" "Internet to see? If you are running a webserver that only needs to be\n" "accessed by this machine, you can safely answer NO here.\n" "\n" msgstr "" #: ../../tinyfirewall.pm_.c:27 msgid "" "Are you running a name server on this machine? If you didn't set one\n" "up to give away IP and zone information to the whole Internet, please\n" "answer no.\n" "\n" msgstr "" #: ../../tinyfirewall.pm_.c:32 msgid "" "Do you want to allow incoming Secure Shell (ssh) connections? This\n" "is a telnet-replacement that you might use to login. If you're using\n" "telnet now, you should definitely switch to ssh. telnet is not\n" "encrypted -- so some attackers can steal your password if you use\n" "it. ssh is encrypted and doesn't allow for this eavesdropping." msgstr "" #: ../../tinyfirewall.pm_.c:37 msgid "" "Do you want to allow incoming telnet connections?\n" "This is horribly unsafe, as we explained in the previous screen. We\n" "strongly recommend answering No here and using ssh in place of\n" "telnet.\n" msgstr "" #: ../../tinyfirewall.pm_.c:42 msgid "" "Are you running an FTP server here that you need accessible to the\n" "Internet? If you are, we strongly recommend that you only use it for\n" "Anonymous transfers. Any passwords sent by FTP can be stolen by some\n" "attackers, since FTP also uses no encryption for transferring passwords.\n" msgstr "" #: ../../tinyfirewall.pm_.c:47 msgid "" "Are you running a mail server here? If you're sending you \n" "messages through pine, mutt or any other text-based mail client,\n" "you probably are. Otherwise, you should firewall this off.\n" "\n" msgstr "" #: ../../tinyfirewall.pm_.c:52 msgid "" "Are you running a POP or IMAP server here? This would\n" "be used to host non-web-based mail accounts for people via \n" "this machine.\n" "\n" msgstr "" #: ../../tinyfirewall.pm_.c:57 msgid "" "You appear to be running a 2.2 kernel. If your network IP\n" "is automatically set by a computer in your home or office \n" "(dynamically assigned), we need to allow for this. Is\n" "this the case?\n" msgstr "" #: ../../tinyfirewall.pm_.c:62 msgid "" "Is your computer getting time syncronized to another computer?\n" "Mostly, this is used by medium-large Unix/Linux organizations\n" "to synchronize time for logging and such. If you're not part\n" "of a larger office and haven't heard of this, you probably \n" "aren't." msgstr "" #: ../../tinyfirewall.pm_.c:67 msgid "" "Configuration complete. May we write these changes to disk?\n" "\n" "\n" "\n" msgstr "" "Ayarlama Tamamlandı.Şimdi bu ayarlaı disk üzerine saklamamı istermisiniz ?\n" "\n" "\n" "\n" #: ../../tinyfirewall.pm_.c:83 #, fuzzy, c-format msgid "Can't open %s: %s\n" msgstr "Adaptör %s: %s" #: ../../tinyfirewall.pm_.c:85 #, fuzzy, c-format msgid "Can't open %s for writing: %s\n" msgstr "Yazmak için açılan %s'de hata: %s" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "ssh içeren diğer ağ öğeleri için protokoller" #: ../../share/compssUsers:999 msgid "Development" msgstr "Geliştirme" #: ../../share/compssUsers:999 msgid "Workstation" msgstr "İş istasyonu" #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "Ateş Duvarı/Router" #: ../../share/compssUsers:999 msgid "Personal Information Management" msgstr "Kişisel Bilgi Yönetimi" #: ../../share/compssUsers:999 msgid "Multimedia - Graphics" msgstr "Çoklu ortam - Grafik" #: ../../share/compssUsers:999 msgid "Internet" msgstr "İnternet" #: ../../share/compssUsers:999 msgid "Network Computer (client)" msgstr "Ağ Öğesi (client)" #: ../../share/compssUsers:999 msgid "Audio-related tools: mp3 or midi players, mixers, etc" msgstr "Sesle ilgili araçlar: mp3 ya da midi çalıcılar, karıştırıcılar, vb.." #: ../../share/compssUsers:999 msgid "Internet station" msgstr "İnternet" #: ../../share/compssUsers:999 msgid "Office" msgstr "Ofis" #: ../../share/compssUsers:999 msgid "Multimedia station" msgstr "Çoklu ortam" #: ../../share/compssUsers:999 msgid "" "Set of tools to read and send mail and news (pine, mutt, tin..) and to " "browse the Web" msgstr "" "E-posta alışverişi ve haber grubu istemci programları (pine, mutt, tin..) ve " "web istemcileri " #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "C ve C++ geliştirme kütüphaneleri, programlar ve include dosyaları" #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "" #: ../../share/compssUsers:999 msgid "Programs to manage your finance, such as gnucash" msgstr "Gnucash gibi finans programları" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "" #: ../../share/compssUsers:999 msgid "Documentation" msgstr "Belgeler" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc" #: ../../share/compssUsers:999 msgid "Utilities" msgstr "Gereçler" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "" #: ../../share/compssUsers:999 msgid "Graphical Environment" msgstr "" #: ../../share/compssUsers:999 msgid "Multimedia - Sound" msgstr "Çoklu ortam - Ses" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "Eğlence programları: arcade, strateji, vb.." #: ../../share/compssUsers:999 msgid "Video players and editors" msgstr "Video göstericiler ve düzenleyiciler" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "Konsol Araçları" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "Ses ve video çalma/düzenleme ugulamaları" #: ../../share/compssUsers:999 msgid "Scientific Workstation" msgstr "Bilimsel İş istasyonu" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "Editörler, kabuklar, dosya araçları, terminaller" #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "Serbest Yazılım ve Linux üzerine Kitaplar ve Nasıl dokümanları" #: ../../share/compssUsers:999 msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "" "Kullanıcı dostu uygulamalar ve masaüstü araçlarına sahip görsel bir ortam " #: ../../share/compssUsers:999 msgid "Postfix mail server, Inn news server" msgstr "" #: ../../share/compssUsers:999 msgid "Games" msgstr "Oyunlar" #: ../../share/compssUsers:999 msgid "Multimedia - Video" msgstr "Çoklu ortam - Video" #: ../../share/compssUsers:999 #, fuzzy msgid "Network Computer server" msgstr "Ağ dosya sunucusu" #: ../../share/compssUsers:999 msgid "Graphics programs such as The Gimp" msgstr "Gimp gibi grafik programları" #: ../../share/compssUsers:999 msgid "Office Workstation" msgstr "Ofis iş istasyonu" #: ../../share/compssUsers:999 msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "KDE Masaüstü Ortamı, temel grafik ortamla birlikte birleşik araçlar" #: ../../share/compssUsers:999 msgid "More Graphical Desktops (Gnome, IceWM)" msgstr "Diğer Grafiksel Masaüstleri (Gnome, IceWM)" #: ../../share/compssUsers:999 msgid "Tools to create and burn CD's" msgstr "CD-R ve CD-RW yazmaya yarayan araçlar" #: ../../share/compssUsers:999 msgid "Multimedia - CD Burning" msgstr "Çoklu ortam - CD Yazma" #: ../../share/compssUsers:999 msgid "Archiving, emulators, monitoring" msgstr "Arşivleme, emülatörler, izleme" #: ../../share/compssUsers:999 msgid "Database" msgstr "Veritabanı" #: ../../share/compssUsers:999 msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "Ofis programları: kelime işlemciler (kword, abiword), kspread, gnumeric, pdf " "göstericiler, vb.." #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "Web/FTP" #: ../../share/compssUsers:999 #, fuzzy msgid "Server" msgstr "sunucu" #: ../../share/compssUsers:999 msgid "Personal Finance" msgstr "Kişisel Finans" #: ../../share/compssUsers:999 msgid "Configuration" msgstr "Yapılandırma" #: ../../share/compssUsers:999 msgid "KDE Workstation" msgstr "KDE İş istasyonu" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "Diğer Görsel Masaüstleri" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "Apache ve Pro-ftpd" #: ../../share/compssUsers:999 msgid "Mail/Groupware/News" msgstr "Posta/Groupware/Haberler(News)" #: ../../share/compssUsers:999 msgid "Gnome Workstation" msgstr "Gnome İş istasyonu" #: ../../share/compssUsers:999 #, fuzzy msgid "Internet gateway" msgstr "İnternet" #: ../../share/compssUsers:999 msgid "Tools for your Palm Pilot or your Visor" msgstr "Palm Pilot ya da Visor'unuz için araçlar" #: ../../share/compssUsers:999 msgid "Game station" msgstr "Oyun Konsolu" #: ../../share/compssUsers:999 msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, vb.." #: ../../share/compssUsers:999 msgid "Tools to ease the configuration of your computer" msgstr "Sisteminizin ayarlarını düzenleyecek uygulama" #: ../../share/compssUsers:999 msgid "Set of tools for mail, news, web, file transfer, and chat" msgstr "E-posta, haber grubu, web, dosya transferi ve sohbet araçları" #, fuzzy #~ msgid "Lilo/Grub configuration" #~ msgstr "ADSL ayarları" #, fuzzy #~ msgid "Selected size %d%s" #~ msgstr "Dosya seç" #, fuzzy #~ msgid "Opening your connection..." #~ msgstr "Bağlantınız test ediliyor..." #~ msgid "Configure..." #~ msgstr "Yapılandırılıyor..." #~ msgid "Standard tools" #~ msgstr "Standart uygulamalar" #, fuzzy #~ msgid "Configuration de Lilo/Grub" #~ msgstr "Yapılandırma: Yer Ekle" #~ msgid "This startup script try to load your modules for your usb mouse." #~ msgstr "" #~ "Bu açılış betiği usb fareniz için gerekli modüllerin yüklenmesini sağlar." #~ msgid "Boot style configuration" #~ msgstr "Boot Stil ayarları" #~ msgid "" #~ "Now that your Internet connection is configured,\n" #~ "your computer can be configured to share its Internet connection.\n" #~ "Note: you need a dedicated Network Adapter to set up a Local Area Network " #~ "(LAN).\n" #~ "\n" #~ "Would you like to setup the Internet Connection Sharing?\n" #~ msgstr "" #~ "Şu anda Internet bağlantınız ayarlandı,\n" #~ "bilgisayarınız internet bağlantısını paylaşmak için yapılandırılabilir.\n" #~ "Not: Yer Ağ (LAN)'ı ayarlamak için bir ethernet kartına ihtiyacınız " #~ "olacaktır.\n" #~ "\n" #~ "İnternet bağlantınızı paylaştırmak istiyor musunuz?\n" #~ msgid "Automatic dependencies" #~ msgstr "Otomatik bağımlılık denetimi" #~ msgid "Configure LILO/GRUB" #~ msgstr "LILO/GRUB'u Ayarla" #~ msgid "Create a boot floppy" #~ msgstr "Açılış disketi oluştur" #~ msgid "Format floppy" #~ msgstr "Disketi biçimlendir" #~ msgid "Choice" #~ msgstr "Seçim" #~ msgid "horizontal nice looking aurora" #~ msgstr "Yatay güzel görünüş ayarları" #~ msgid "vertical traditional aurora" #~ msgstr "Dikey tarama ayarları" #~ msgid "gMonitor" #~ msgstr "gMonitor" #~ msgid "" #~ "You can now select some miscellaneous options for your system.\n" #~ "\n" #~ "* Use hard drive optimizations: this option can improve hard disk " #~ "performance but is only for advanced users. Some buggy\n" #~ " chipsets can ruin your data, so beware. Note that the kernel has a builtin " #~ "blacklist of drives and chipsets, but if\n" #~ " you want to avoid bad surprises, leave this option unset.\n" #~ "\n" #~ "\n" #~ "* Choose security level: you can choose a security level for your system. " #~ "Please refer to the manual for complete\n" #~ " information. Basically, if you don't know what to choose, keep the default " #~ "option.\n" #~ "\n" #~ "\n" #~ "* Precise RAM if needed: unfortunately, there is no standard method to ask " #~ "the BIOS about the amount of RAM present in\n" #~ " your computer. As consequence, Linux may fail to detect your amount of RAM " #~ "correctly. If this is the case, you can\n" #~ " specify the correct amount or RAM here. Please note that a difference of 2 " #~ "or 4 MB between detected memory and memory\n" #~ " present in your system is normal.\n" #~ "\n" #~ "\n" #~ "* Removable media automounting: if you would prefer not to manually mount " #~ "removable media (CD-Rom, floppy, Zip, etc.) by\n" #~ " typing \"mount\" and \"umount\", select this option.\n" #~ "\n" #~ "\n" #~ "* Clean \"/tmp\" at each boot: if you want delete all files and directories " #~ "stored in \"/tmp\" when you boot your system,\n" #~ " select this option.\n" #~ "\n" #~ "\n" #~ "* Enable num lock at startup: if you want NumLock key enabled after booting, " #~ "select this option. Please note that you\n" #~ " should not enable this option on laptops and that NumLock may or may not " #~ "work under X." #~ msgstr "" #~ "Şimdi sisteminizde çeşitli ayarlamalar yapabilirsiniz.\n" #~ "\n" #~ " - Sabit disk optimizasyonu: Sabit diskin performansını artırmak \n" #~ "için kullanılabilir, fakat sadece deneyimli kullanıcılar için önerilir: \n" #~ "bazı hatalı chipsetler datalarınızın bozulmasına neden olabilir, bu \n" #~ "yüzden dikkatli olun. Dikkat edilmelidir, çekirdekle birlikte\n" #~ "sürücüler ve chipsetler için bir kara liste gelmektedir. İsterseniz\n" #~ "kötü sürprizlerle karşılaşmamak için bu seçeneği boş bırakabilirsiniz.\n" #~ "\n" #~ " - Güvenlik seviyesi: Sisteminiz için bir güvenlik seviyesi " #~ "seçebilirsiniz.\n" #~ "Tam bir bilgi için gerekli man sayfalarına bakabilirsiniz. Temel olarak:\n" #~ "bilmiyorsanız \"orta\"'yıseçin; eğer gerçekten güvenli bir makinaya sahip \n" #~ "olmak istiyorsanız, \"paranoyak\"'ı seçin. Fakat unutmayın ki, BU SEVİYEDE \n" #~ "SİSTEME KONSOLDAN ROOT OLARAK GİRMENİZE İZİN YOKTUR: Sıradan bir kullanıcı \n" #~ "olarak girip, sonra \"su\" komutu yardımıyla root olabilirsiniz. Daha genel " #~ "\n" #~ "olarak makinenizi sunucu olarak kullanmak dışında başka bir alanda " #~ "kullanmayı \n" #~ "beklemeyin. Uyarıldınız.\n" #~ "\n" #~ " - Toplam bellek miktarı: Günümüz PC dünyasında BIOS'a bilgisayarınızdaki \n" #~ "toplam bellek miktarını soracak belirli bir yöntem bulunmamaktadır. Sonuç \n" #~ "olarak Linux gerçek RAM miktarını bulmakta yanılabilir. Böyle bir durumda\n" #~ "doğru RAM miktarını buraya girebilirsiniz. 2 ya da 4 MB'lik bir fark normal\n" #~ "sayılabilir.\n" #~ "\n" #~ " - Takılıp sökülebilen araçların otomatik bağlanması: \"mount\" ve " #~ "\"umount\"\n" #~ "komutları yardımıyla elle disk, CD sürücü gibi araçları bağlamak " #~ "istemiyorsanız \n" #~ "bu seçeneği işaretleyin.\n" #~ "\n" #~ " - Açılışta Num Lock ışığını yak: Açılışta Num Lock ışığının yanmasını \n" #~ "isterseniz bu seçeneği işaretleyin. Bu seçeneği dizüstü bilgisayarlarda\n" #~ "kullanmamalısınız ve X altında çalışmayabilir." #~ msgid "Internet/Network access" #~ msgstr "İnternet/Ağ hesapları" #~ msgid "Mail information" #~ msgstr "Posta Bilgileri" #~ msgid "Firewall Configuration Wizard" #~ msgstr "Ayeş Duvarı Yapılandırma sihirbazı" #~ msgid "Miscellaneous" #~ msgstr "Çeşitli" #~ msgid "Miscellaneous questions" #~ msgstr "Çeşitli sorular" #~ msgid "Can't use supermount in high security level" #~ msgstr "Yüksek güvenlik seviyesinde supermount kullanılamaz" #~ msgid "" #~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n" #~ "If you want to be root, you have to login as a user and then use \"su\".\n" #~ "More generally, do not expect to use your machine for anything but as a " #~ "server.\n" #~ "You have been warned." #~ msgstr "" #~ "dikkat: BU GÜVENLİK DÜZEYİNDE, KONSOLDAN ROOT KULLANICISI GİRİŞİNE İZİN\n" #~ "VERİLMEMEKTEDİR. Eğer root olmak istiyorsanız, sıradan bir kullanıcı olarak\n" #~ "sisteme girip \"su\" komutunu kullanın. Daha da genel olarak, makinenizi " #~ "bir\n" #~ "sunucu olarak kullanmak dışında bir beklentiniz olmasın.\n" #~ "Uyarıldınız." #~ msgid "" #~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n" #~ "give digits instead of normal letters (eg: pressing `p' gives `6')" #~ msgstr "" #~ "Dikkatli olun, numlock'ı etkinleştirmek birçok tuşun ekrana normal harfler\n" #~ "yerine sayı yazmasına neden olabilir. (örneğin `p'ye basınca `6' yazabilir.)" #~ msgid "Actions" #~ msgstr "Hareketler" #~ msgid "Scientific applications" #~ msgstr "Bilimsel uygulamalar" #~ msgid "toot" #~ msgstr "toot" #~ msgid "First DNS Server" #~ msgstr "Birincil DNS Sunucu" #~ msgid "Second DNS Server" #~ msgstr "İkincil DNS Sunucu" #~ msgid "using module" #~ msgstr "modül kullanılıyor" #~ msgid "Development, Database" #~ msgstr "Geliştirme, Veritabanı" #~ msgid "Development, Standard tools" #~ msgstr "Geliştirme uygulamaları, Standart uygulamalar" #~ msgid "loopback" #~ msgstr "loopback" #~ msgid "None" #~ msgstr "Hiçbiri" #~ msgid "Which bootloader(s) do you want to use?" #~ msgstr "Hangi açılış yükleyicilerini kullanmak istiyorsunuz?" #~ msgid "Auto install floppy" #~ msgstr "Otomatik kurulum disketi" #~ msgid "Try to find a modem?" #~ msgstr "Bir modem arayayım mı?" #~ msgid "Disable Internet Connection" #~ msgstr "İnternet Bağlantısını İptal Et" #~ msgid "Configure local network" #~ msgstr "Yerel ağı yapılandır" #~ msgid "Disable networking" #~ msgstr "Ağı iptal et" #~ msgid "Configure the Internet connection / Configure local Network" #~ msgstr "İnternet bağlantısını Yapılandır / Yerel Ağı Yapılandır" #~ msgid "" #~ "Local networking has already been configured.\n" #~ "Do you want to:" #~ msgstr "" #~ "Yerel ağ ayarları zaten yapılandırıldı.\n" #~ "Tekrar yapılandırmak istiyor musunuz?" #~ msgid "Reconfigure using wizard..." #~ msgstr "Sihirbaz Yardımı ile tekrar Yapılandırılıyor..." #~ msgid "Graphics Manipulation" #~ msgstr "Grafik İşleme Uygulamaları" #~ msgid "Multimedia" #~ msgstr "Çoklu ortam" #~ msgid "Sciences" #~ msgstr "Bilim" #~ msgid "" #~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and file " #~ "transfer tools" #~ msgstr "Xchat, licq, gaim gibi sohbet (IRC, vb..) programları" #~ msgid "Communication facilities" #~ msgstr "İletişim araçları" #~ msgid "KDE" #~ msgstr "KDE" #~ msgid "Gnome" #~ msgstr "Gnome" #~ msgid "Internet Tools" #~ msgstr "İnternet Araçları" #~ msgid "Databases clients and servers (mysql and postgresql)" #~ msgstr "Veri tabanı istemci ve sunucuları (mysql and postgresql)" #~ msgid "Development C/C++" #~ msgstr "Geliştirme C/C++" #~ msgid "Configure timezone" #~ msgstr "Zaman dilimi ayarları" #~ msgid "Configure printer" #~ msgstr "Yazıcı ayarları" #~ msgid "Network adaptater 1 (eth0):" #~ msgstr "Ethernet adaptörü 1 (eth0)" #~ msgid "(may cause data corruption)" #~ msgstr "(veri kaybına neden olabilir)" #~ msgid "Use hard drive optimisations?" #~ msgstr "Sabit disk optimizasyonu" #~ msgid "Enable num lock at startup" #~ msgstr "Açılışta Num Lock ışığını yak" #~ msgid "Confirm Password" #~ msgstr "Şifreyi Tekrarla" #~ msgid "default" #~ msgstr "öntanımlı" #~ msgid "What is your system used for?" #~ msgstr "Sisteminiz hangi amaçla kullanılacak?" #~ msgid "Select the size you want to install" #~ msgstr "İstediğiniz kurulum boyutunu seçin" #~ msgid "Use diskdrake" #~ msgstr "Diskdrake'i kullan" #~ msgid "Customized" #~ msgstr "Özel" #~ msgid "" #~ "Are you sure you are an expert? \n" #~ "You will be allowed to make powerful but dangerous things here.\n" #~ "\n" #~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n" #~ "are you ready to answer that kind of questions?" #~ msgstr "" #~ "Bir uzman olduğunuzdan emin misiniz? \n" #~ "Burada güçlü fakat tehlikeli olabilecek işlemler yapmanıza izin " #~ "verilecektir.\n" #~ "\n" #~ "Şu tarz sorularla karşılaşacaksınız: \"Şifreler için gölge dosyasını " #~ "kullan?\"\n" #~ "Bu tür sorulara hazır mısınız?" #~ msgid "Use shadow file" #~ msgstr "Gölge dosyası kullan" #~ msgid "shadow" #~ msgstr "gölge" #~ msgid "MD5" #~ msgstr "MD5" #~ msgid "Use MD5 passwords" #~ msgstr "MD5 şifreleme kullan" #~ msgid "Search" #~ msgstr "Ara" #~ msgid "Package" #~ msgstr "Paket" #~ msgid "Text" #~ msgstr "Metin" #~ msgid "Tree" #~ msgstr "Ağaç" #~ msgid "Sort by" #~ msgstr "Sıralama" #~ msgid "Category" #~ msgstr "Kategori" #~ msgid "See" #~ msgstr "Bak" #~ msgid "Installed packages" #~ msgstr "Kurulan paketler" #~ msgid "Available packages" #~ msgstr "Mevcut paketler" #~ msgid "Show only leaves" #~ msgstr "Sadece uçları göster" #~ msgid "Expand all" #~ msgstr "Hepsini aç" #~ msgid "Collapse all" #~ msgstr "Hepsini kapat" #~ msgid "Add location of packages" #~ msgstr "Paketlerin yerini ekle" #~ msgid "Update location" #~ msgstr "Yerleri güncelle" #~ msgid "Remove" #~ msgstr "Ayır" #~ msgid "Find Package" #~ msgstr "Paket Ara" #~ msgid "Find Package containing file" #~ msgstr "Dosyayı içeren paketi ara" #~ msgid "Toggle between Installed and Available" #~ msgstr "Kurulmuş ve Mevcut paketler arasında seçim yap" #~ msgid "Uninstall" #~ msgstr "Sil" #~ msgid "Choose package to install" #~ msgstr "Kurulacak paketi seçin" #~ msgid "Checking dependencies" #~ msgstr "Bağımlılıklar kontrol ediliyor" #~ msgid "Wait" #~ msgstr "Bekleyin" #~ msgid "The following packages are going to be uninstalled" #~ msgstr "Aşağıdaki paketler sistemden silinecekler" #~ msgid "Uninstalling the RPMs" #~ msgstr "RPM paketleri siliniyor" #~ msgid "Regexp" #~ msgstr "Düzgün deyim" #~ msgid "Which package are looking for" #~ msgstr "Hangi paketi arıyorsunuz?" #~ msgid "%s not found" #~ msgstr "%s bulunamadı" #~ msgid "No match" #~ msgstr "Eşleme yapılamadı" #~ msgid "No more match" #~ msgstr "Daha fazla eşleme yok" #~ msgid "" #~ "rpmdrake is currently in ``low memory'' mode.\n" #~ "I'm going to relaunch rpmdrake to allow searching files" #~ msgstr "" #~ "Şu anda rpmdrake ''düşük bellek'' kipinde çalışıyor.\n" #~ "Dosyaları tarayabilmesi için rpmdrake tekrar çalıştırılacak." #~ msgid "Which file are you looking for?" #~ msgstr "Hangi dosyalara bakıyorsunuz?" #~ msgid "What are looking for?" #~ msgstr "Neyi arıyorsunuz?" #~ msgid "Give a name (eg: `extra', `commercial')" #~ msgstr "Bir isim verin (örn: 'extra' ya da 'commercial')" #~ msgid "Directory" #~ msgstr "Dizin" #~ msgid "No cdrom available (nothing in /mnt/cdrom)" #~ msgstr "CD-ROM bulunamadı (/mnt/cdrom dizini boş)" #~ msgid "URL of the directory containing the RPMs" #~ msgstr "RPM içeren dizinin URL adresi" #~ msgid "" #~ "For FTP and HTTP, you need to give the location for hdlist\n" #~ "It must be relative to the URL above" #~ msgstr "FTP ve HTTP için hdlist dosyasının bulunduğu yeri vermelisiniz" #~ msgid "Please submit the following information" #~ msgstr "Lütfen aşağıdaki bilgileri girin" #~ msgid "%s is already in use" #~ msgstr "%s zaten kullanımda" #~ msgid "Updating the RPMs base" #~ msgstr "RPM veritabanı güncelleniyor" #~ msgid "Going to remove entry %s" #~ msgstr "%s girdisi silinecek" #~ msgid "Finding leaves" #~ msgstr "Uçlar bulunuyor" #~ msgid "Finding leaves takes some time" #~ msgstr "Uçların bulunması zaman alabilir" #~ msgid "I have found an ISDN Card:\n" #~ msgstr "Bir ISDN kartı buldum:\n" #~ msgid "France" #~ msgstr "Fransa" #~ msgid "Other countries" #~ msgstr "Diğer ülkeler" #~ msgid "In which country are you located ?" #~ msgstr "Hangi ülkede bulunuyorsunuz?" #~ msgid "Alcatel modem" #~ msgstr "Alcatel modem" #~ msgid "ECI modem" #~ msgstr "ECI modem" #~ msgid "" #~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI." #~ msgstr "Adsl modeminiz Alcatel türündeyse Alcatel'i, değilse ECI'yi seçin." #~ msgid "don't use pppoe" #~ msgstr "pppoe'yi kullanma" #~ msgid "mandatory" #~ msgstr "şart" #~ msgid "interesting" #~ msgstr "ilginç" #~ msgid "i18n (important)" #~ msgstr "i18n (önemli)" #~ msgid "i18n (very nice)" #~ msgstr "i18n (çok hoş)" #~ msgid "i18n (nice)" #~ msgstr "i18n (güzel)" #~ msgid "KDE, QT, Gnome, GTK+" #~ msgstr "KDE, QT, Gnome, GTK+" #~ msgid "Python, Perl, libraries, tools" #~ msgstr "Python, Perl, kütüphaneler, araçlar" #~ msgid "Which serial port is your mouse connected to?" #~ msgstr "Fareniz hangi seri porta bağlı?" #~ msgid "Czech" #~ msgstr "Çek dili" #~ msgid "Slovakian" #~ msgstr "Slovakça" #~ msgid "Could not install ipchains RPM with urpmi." #~ msgstr "ipchains RPM paketi urpmi ile kurulamadı." #~ msgid "Could not install dhcp RPM with urpmi." #~ msgstr "dhcp RPM paketi urpmi ile kurulamadı ." #~ msgid "Could not install linuxconf RPM with urpmi." #~ msgstr "linuxconf RPM paketi urpmi ile kurulamadı." #~ msgid "Could not install caching-nameserver RPM with urpmi." #~ msgstr "caching-nameserver RPM paketi urpmi ile kurulamadı." #~ msgid "Reconfigure local network" #~ msgstr "Yerel ağ yapılandırmasını yeniden yap" #~ msgid "Connect to Internet with a normal modem" #~ msgstr "Normal bir modemle internete bağlan" #~ msgid "Connect to Internet using ISDN" #~ msgstr "ISDN kullanarak internete bağlan" #~ msgid "Connect to Internet using DSL (or ADSL)" #~ msgstr "DSL (ya da ADSL) kullanarak internete bağlan" #~ msgid "Connect to Internet using Cable" #~ msgstr "Kablo kullanarak internete bağlan" #~ msgid "Germany" #~ msgstr "Almanya" #~ msgid "Germany (1TR6)" #~ msgstr "Almanya (1TR6)" #~ msgid "Which partition type do you want?" #~ msgstr "Hangi bölüm tipini istiyorsunuz?" #~ msgid "" #~ "Any partitions that have been newly defined must be formatted for\n" #~ "use (formatting meaning creating a filesystem). At this time, you may\n" #~ "wish to re-format some already existing partitions to erase the data\n" #~ "they contain. Note: it is not necessary to re-format pre-existing\n" #~ "partitions, particularly if they contain files or data you wish to keep.\n" #~ "Typically retained are /home and /usr/local." #~ msgstr "" #~ "Yeni oluşturulan her disk bölümü mutlaka biçimlendirilmelidir. Bu aşamada,\n" #~ "mevcut bölümlerinizi yeniden biçimlendirmek ya da üzerlerindeki veriyi\n" #~ "silmek isteyebilirsiniz. NOT: Mevcut bölümleri tekrar biçimlendirmek\n" #~ "şart değildir. Bu bölümlerdeki verileri saklamak isteyebilirsiniz.\n" #~ "Örnek olarak bu bölümler bağlama noktası olarak /home ve /usr/local olabilir." #~ msgid "" #~ "The packages selected are now being installed. This operation\n" #~ "should take a few minutes unless you have chosen to upgrade an\n" #~ "existing system, in that case it can take more time even before\n" #~ "upgrade starts." #~ msgstr "" #~ "Şimdi seçilen paketler sisteme kurulacaktır. Bu işlem, güncelleme seçimi\n" #~ "yapmadıysanız bir kaç dakika sürecektir. Güncelleme seçimi yaptıysanız,\n" #~ "güncelleme işlemi başlamadan önce bile biraz daha uzun süre geçecekcektir." #~ msgid "" #~ "This section is dedicated to configuring a local area\n" #~ "network (LAN) or a modem.\n" #~ "\n" #~ "Choose \"Local LAN\" and DrakX will\n" #~ "try to find an Ethernet adapter on your machine. PCI adapters\n" #~ "should be found and initialized automatically.\n" #~ "However, if your peripheral is ISA, autodetection will not work,\n" #~ "and you will have to choose a driver from the list that will appear then.\n" #~ "\n" #~ "\n" #~ "As for SCSI adapters, you can let the driver probe for the adapter\n" #~ "in the first time, otherwise you will have to specify the options\n" #~ "to the driver that you will have fetched from documentation of your\n" #~ "hardware.\n" #~ "\n" #~ "\n" #~ "If you install a Linux-Mandrake system on a machine which is part\n" #~ "of an already existing network, the network administrator will\n" #~ "have given you all necessary information (IP address, network\n" #~ "submask or netmask for short, and hostname). If you're setting\n" #~ "up a private network at home for example, you should choose\n" #~ "addresses.\n" #~ "\n" #~ "\n" #~ "Choose \"Dialup with modem\" and the Internet connection with\n" #~ "a modem will be configured. DrakX will try to find your modem,\n" #~ "if it fails you will have to select the right serial port where\n" #~ "your modem is connected to." #~ msgstr "" #~ "Bu bölüm yerel ağ alanı (LAN) ayarlarınızı yapmanız için ayrılmıştır.\n" #~ "\n" #~ "\n" #~ "\"Yerel Ağ\" seçeneğine tıklayın. Mandrake sistemdeki ethernet kartlarını \n" #~ "tarayacaktır. PCI kartlar otomatik olarak bulunup gerekli ayarlar yapılarak " #~ "\n" #~ "hazır duruma getirilebilir. Fakat bir ISA kart kullanıyorsanız belirecek \n" #~ "listeden sürücülerinizi seçmelisiniz.\n" #~ "\n" #~ "\n" #~ "SCSI adaptörlerde olduğu gibi, burada da sürücülerin donanımı tanımasını \n" #~ "bekleyin. Eğer tarama başarısız olursa, donanımınızla ilgili özellikleri \n" #~ "sürücünüzü ayarlarken belirtin.\n" #~ "\n" #~ "\n" #~ "Eğer Linux Mandrake'yi kurduğunuz makina zaten mevcut bir ağın parçası \n" #~ "ise gerekli bilgileri (IP adresi, alt ağ maskesi, ağ maskesi vb.) \n" #~ "ağ yöneticinizden edinebilirsiniz.\n" #~ "\n" #~ "\"Modem ile bağlantı\" seçeneğini işaretlemeniz halinde sistem modeminizi \n" #~ "bulmayı deneyecektir. Modem bulunamazsa el yardımıyla gerekli düzenlemeyi \n" #~ "(seri port) yapmalısınız." #~ msgid "What is the type of your mouse?" #~ msgstr "Ne tip bir fare kullanıyorsunuz?" #~ msgid "Automatic resolutions" #~ msgstr "Otomatik çözünürlükler" #~ msgid "" #~ "To find the available resolutions I will try different ones.\n" #~ "Your screen will blink...\n" #~ "You can switch if off if you want, you'll hear a beep when it's over" #~ msgstr "" #~ "Geçerli bir çözünürlük bulmak için başka birini deneyeceğim.\n" #~ "Ekranınız kapanıp açılacaktır...\n" #~ "Tamamlandığı zaman bip sesi duyacaksınız" #~ msgid "" #~ "I can try to find the available resolutions (eg: 800x600).\n" #~ "Sometimes, though, it may hang the machine.\n" #~ "Do you want to try?" #~ msgstr "" #~ "Kullanılabilinir çözünürlülükleri bulmayı deneyebilirim (ör: 800x600).\n" #~ "Ancak nadiren de görülse, makinanın kilitlenme ihtimali vardır.\n" #~ "Denemek ister misiniz?" #~ msgid "" #~ "No valid modes found\n" #~ "Try with another video card or monitor" #~ msgstr "" #~ "Geçerli bir kip bulunamadı\n" #~ "Başka bir ekran kartı veya monitör deneyin" #~ msgid "Automatical resolutions search" #~ msgstr "Otomatik çözünürlük araması" #~ msgid "Apple ADB Mouse" #~ msgstr "Apple ADB Fare" #~ msgid "Apple ADB Mouse (2 Buttons)" #~ msgstr "Apple ADB Fare (2 Düğmeli)" #~ msgid "Apple ADB Mouse (3+ Buttons)" #~ msgstr "Apple ADB Fare (3 ya da daha çok düğmeli)" #~ msgid "Apple USB Mouse" #~ msgstr "Apple USB Fare" #~ msgid "Apple USB Mouse (2 Buttons)" #~ msgstr "Apple USB Fare (2 Düğmeli)" #~ msgid "Apple USB Mouse (3+ Buttons)" #~ msgstr "Apple USB Fare (3 ya da daha çok düğmeli)" #~ msgid "ASCII MieMouse" #~ msgstr "ASCII MieMouse" #~ msgid "Genius NetMouse Pro" #~ msgstr "Genius NetMouse Pro" #~ msgid "ATI Bus Mouse" #~ msgstr "ATI Bus Mouse" #~ msgid "Microsoft Bus Mouse" #~ msgstr "Microsoft Bus Mouse" #~ msgid "Logitech Bus Mouse" #~ msgstr "Logitech Bus Mouse" #~ msgid "USB Mouse (3 buttons or more)" #~ msgstr "USB Fare (3 ya da daha çok düğmeli)" #~ msgid "Microsoft Rev 2.1A or higher (serial)" #~ msgstr "Microsoft Sürüm 2.1A ya da yenisi (seri)" #~ msgid "Logitech MouseMan+/FirstMouse+ (serial)" #~ msgstr "Logitech MouseMan+/FirstMouse+ (seri)" #~ msgid "ASCII MieMouse (serial)" #~ msgstr "ASCII MieMouse (seri)" #~ msgid "Genius NetMouse (serial)" #~ msgstr "Genius NetMouse (seri)" #~ msgid "Generic Mouse (serial)" #~ msgstr "Sıradan Fare (seri)" #~ msgid "Microsoft compatible (serial)" #~ msgstr "Microsoft uyumlu (seri)" #~ msgid "Generic 3 Button Mouse (serial)" #~ msgstr "Sıradan 3 Tuşlu Fare (seri)" #~ msgid "nfs mount failed" #~ msgstr "nfs bağlama başarısız" #~ msgid "CHAP" #~ msgstr "CHAP" #~ msgid "Cryptographic" #~ msgstr "Kriptografi" #~ msgid "Do you want to configure a local network for your system?" #~ msgstr "Sisteminizde yerel ağ ayarlarını yapmak istiyor musunuz?" #~ msgid "Show less" #~ msgstr "Daha azını göster" #~ msgid "Show more" #~ msgstr "Daha fazlasını göster" #~ msgid "tie" #~ msgstr "bağ" #~ msgid "brunette" #~ msgstr "sarışın" #~ msgid "girl" #~ msgstr "kız" #~ msgid "woman-blond" #~ msgstr "sarışın kadın" #~ msgid "automagic" #~ msgstr "otomatik" #~ msgid "What is your keyboard layout?" #~ msgstr "Klavye düzeniniz nedir?" #~ msgid "Try to find PCMCIA cards?" #~ msgstr "PCMCIA kartlar bulunsun mu?" #~ msgid "Try to find %s devices?" #~ msgstr "%s aygıtlar taransın mı?" #~ msgid "Modem Configuration" #~ msgstr "Modem Yapılandırması" #~ msgid "" #~ "Do you want to configure a dialup connection with modem for your system?" #~ msgstr "Sisteminizdeki modemin ayarlarını yapmak istiyor musunuz?" #~ msgid "Try to find PCI devices?" #~ msgstr "PCI aygıtlar taransın mı?" #~ msgid "Searching root partition." #~ msgstr "root bölümü (/) aranıyor." #~ msgid "%s: This is not a root partition, please select another one." #~ msgstr "%s: Bu kök bölüm değil, lütfen başka birini seçin." #~ msgid "No root partition found" #~ msgstr "Hiç root disk bölümü bulunamadı" #~ msgid "Please choose a partition to use as your root partition." #~ msgstr "Kök bölümü olarak kullanacağınız disk bölümünü seçin" #~ msgid "You don't have any enough room for Lnx4win" #~ msgstr "Lnx4win için yeterli yeriniz yok" #~ msgid ", %U MB" #~ msgstr ", %U MB" # NOTE: this message will be displayed by lilo at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is then suggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # When possible cp437 accentuated letters can be used too. # # '\207' is 'ç' (ccedilla) in cp437 encoding # '\224' is 'ö' (odiaeresis) in cp437 encoding. # There are no g( (gbreve), nor s, (scedilla) nor i. (dotlessi) in cp437 # #~ msgid "" #~ "Welcome to LILO the operating system chooser!\n" #~ "\n" #~ "To list the possible choices, press .\n" #~ "\n" #~ "To load one of them, write its name and press or wait %d seconds for " #~ "default boot.\n" #~ "\n" #~ msgstr "" #~ "LILO isletim sistemi secim programina hos geldiniz!\n" #~ "\n" #~ "Yapabileceginiz secimleri gorebilmek icin tusuna basin.\n" #~ "\n" #~ "Iclerinden birini acmak icin ismini yazin ve \n" #~ "tusuna basin veya ontanimli acilis icin %d saniye bekleyin.\n" #~ "\n" # NOTE: this message will be displayed by SILO at boot time; that is # only the ascii charset will be available # so use only 7bit for this message # #~ msgid "" #~ "Welcome to SILO the operating system chooser!\n" #~ "\n" #~ "To list the possible choices, press .\n" #~ "\n" #~ "To load one of them, write its name and press or\n" #~ "wait %d seconds for default boot.\n" #~ "\n" #~ msgstr "" #~ "SILO isletim sistemi secim programina hos geldiniz!\n" #~ "\n" #~ "Yapabileceginiz secimleri gorebilmek icin tusuna basin.\n" #~ "\n" #~ "Iclerinden birini acmak icin ismini yazin ve \n" #~ "tusuna basin veya ontanimli acilis icin %d saniye bekleyin.\n" #~ "\n" #~ msgid "SILO main options" #~ msgstr "SiLo ana seçenekleri" #~ msgid "" #~ "Here are the following entries in SILO.\n" #~ "You can add some more or change the existing ones." #~ msgstr "" #~ "Burada SiLo'nun kullanacağı ayarlamalar verilmiştir.\n" #~ "Yenilerini ekleyebilir, veya mevcut olanları değiştirebilirsiniz." #~ msgid "This label is already in use" #~ msgstr "Bu etiket kullanımda" #~ msgid "Installation of SILO failed. The following error occured:" #~ msgstr "SILO kurulumu başarısız oldu. Oluşan hata:" #~ msgid "" #~ "DrakX will attempt at first to look for one or more PCI\n" #~ "SCSI adapter(s). If it finds it (or them) and knows which driver(s)\n" #~ "to use, it will insert it (them) automatically.\n" #~ "\n" #~ "\n" #~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n" #~ "doesn't know which driver to use for this card, or if you have no\n" #~ "SCSI adapters at all, you will then be prompted on whether you have\n" #~ "one or not. If you have none, answer \"No\". If you have one or more,\n" #~ "answer \"Yes\". A list of drivers will then pop up, from which you\n" #~ "will have to select one.\n" #~ "\n" #~ "\n" #~ "After you have selected the driver, DrakX will ask if you\n" #~ "want to specify options for it. First, try and let the driver\n" #~ "probe for the hardware: it usually works fine.\n" #~ "\n" #~ "\n" #~ "If not, do not forget the information on your hardware that you\n" #~ "could get from your documentation or from Windows (if you have it\n" #~ "on your system), as suggested by the installation guide. These\n" #~ "are the options you will need to provide to the driver." #~ msgstr "" #~ "DrakX ilk olarak bir veya birden fazla PCI/SCSI adaptör(ler)e bakacak\n" #~ "Eğer adaptör(leri) ve uyan sürücü(leri) bulursa otomatik yükleyecek.\n" #~ "\n" #~ "\n" #~ "Eger SCSI adaptörünüz bir ISA kart ise veya PCI kart ise, ancak DrakX hangi " #~ "\n" #~ "sürücülerin bunlara uygun olduğunu bulamaz ise, ya da SCSI adaptörünüz \n" #~ "yoksa size bir seçim sunulacak. Eğer sistemde bu tipte bir kart " #~ "bulunmuyorsa\n" #~ "\"hayır\", eğer bir veya birden fazla kartınız varsa \"evet\" diyerek \n" #~ "cevaplayın. Ardından seçilen sürücülerin bulunduğu bir menü belirecektir.\n" #~ "\n" #~ "\n" #~ "Sürücüyü seçtikten sonra, DrakX sürücü için bir özellik belirtmek isteyip\n" #~ "istemediğinizi soracaktır. İlk önce sürücüler donanımı tanımayı denesin.\n" #~ "\n" #~ "\n" #~ "Eğer çalışmazsa, yükleme esnasında istenen bilgileri donanımınızın\n" #~ "dökümanlarından veya Windows(TM) (Eğer sisteminizde varsa) edinebilirsiniz." #~ msgid "Shutting down" #~ msgstr "Kapatılıyor" #~ msgid "useless" #~ msgstr "gereksiz" #~ msgid "garbage" #~ msgstr "çöplük" #~ msgid "" #~ "Choose \"Install\" if there are no previous versions of Linux\n" #~ "installed, or if you wish to use multiple distributions or versions.\n" #~ "\n" #~ "\n" #~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake " #~ "Linux:\n" #~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold " #~ "2000\n" #~ "or 7.0 (Air)." #~ msgstr "" #~ "Eğer sisteminizde Linux yoksa, ya da birden fazla Linux dağıtımı ve\n" #~ "sürümü kullanmak istiyorsanız \"Kurulum\" u seçin.\n" #~ "\n" #~ "\n" #~ "Eğer sisteminizde bulunan Linux Mandrake'yi güncellemek istiyorsanız\n" #~ "\"Güncelleme\" yi seçin: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen)\n" #~ "6.0 (Venus), 6.1 (Helios), Gold 2000 ya da 7.0 (Air)." #~ msgid "Do you want to use LILO?" #~ msgstr "LiLo'yu kullanmak istiyor musunuz?" #~ msgid "" #~ "You may now select the packages you wish to install.\n" #~ "\n" #~ "\n" #~ "First you can select group of package to install or upgrade. After that\n" #~ "you can select more packages according to the total size you wish to\n" #~ "select.\n" #~ "\n" #~ "\n" #~ "If you are in expert mode, you can select packages individually.\n" #~ "Please note that some packages require the installation of others.\n" #~ "These are referred to as package dependencies. The packages you select,\n" #~ "and the packages they require will be automatically selected for\n" #~ "install. It is impossible to install a package without installing all\n" #~ "of its dependencies." #~ msgstr "" #~ "Şimdi kurmak istediğiniz paketleri seçebilirsiniz.\n" #~ "\n" #~ "\n" #~ "Unutmayın ki bazı paketlerin kurulması için başka paketlerin de kurulması\n" #~ "gerekir. Bu durum paket bağımlılığı olarak adlandırılır. Seçtiğiniz " #~ "paketler\n" #~ "ve bağımlılıkları otomatik olarak kurulum listesine eklenecektir. Ancak\n" #~ "paketin bağımlı olduğu diğer paketi(leri) kurmamak da mümkündür." #~ msgid "" #~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n" #~ "Normally they are correctly detected during installation. If you don't\n" #~ "see yours detected, you can add one or more now.\n" #~ "\n" #~ "\n" #~ "If you don't want that everybody could access at one of them, you can " #~ "remove\n" #~ "it now (a boot disk will be needed to boot it)." #~ msgstr "" #~ "LILO (LInux LOader) hem Linux, hem de diğer işletim sistemlerini açabilir." #~ msgid "" #~ "Now that you've selected desired groups, please choose \n" #~ "how many packages you want, ranging from minimal to full \n" #~ "installation of each selected groups." #~ msgstr "" #~ "Şimdi gerekli grupları seçtiğinize göre, her seçilen grup \n" #~ "için kaç adet paket istediğinizi söyleyin" #~ msgid "" #~ "Select:\n" #~ "\n" #~ " - Recommended: If you have never installed Linux before.\n" #~ "\n" #~ "\n" #~ " - Customized: If you are familiar with Linux, you will be able to \n" #~ "select the usage for the installed system between normal, development or\n" #~ "server. Choose \"Normal\" for a general purpose installation of your\n" #~ "computer. You may choose \"Development\" if you will be using the computer\n" #~ "primarily for software development, or choose \"Server\" if you wish to\n" #~ "install a general purpose server (for mail, printing...).\n" #~ "\n" #~ "\n" #~ " - Expert: If you are fluent with GNU/Linux and want to perform\n" #~ "a highly customized installation, this Install Class is for you. You will\n" #~ "be able to select the usage of your installed system as for \"Customized\"." #~ msgstr "" #~ "Seçim:\n" #~ "\n" #~ "\n" #~ " - Önerilen: Eğer daha önce Linux kurmadıysanız ya da 1999'da\n" #~ "\"Yılın Ürünü\" ödülünü alan dağıtımı kurmak istiyorsanız\n" #~ "bu seçeneğe tıklayın.\n" #~ "\n" #~ "\n" #~ " - Özel: Eğer Linux'a aşina iseniz ve ağırlıklı olarak yazılım\n" #~ "geliştirme ile uğraşacaksanız bu seçeneğe tıklayın. Sistemi genel amaçlı \n" #~ "kullanacaksanız \"Normal\", yazılım geliştirme amaçlı kullanacaksanız \n" #~ "\"Geliştirme\" ve genel amaçlı sunucu olarak kullanacaksanız \"Sunucu\" \n" #~ "seçeneklerinden birisini seçiniz\n" #~ "\n" #~ "\n" #~ " - Expert: Eğer GNU/Linux'u biliyorsanız ve tamamen özel bir kurulum\n" #~ "istiyorsanız bu kurulum sınıfı sizin için." #~ msgid "Downloading cryptographic packages" #~ msgstr "Kriptografik paketler alınıyor" #~ msgid "Setup SCSI" #~ msgstr "SCSI Ayarları" #~ msgid "Which packages do you want to install" #~ msgstr "Hangi paketleri kurmak istiyorsunuz?" #~ msgid "Local LAN" #~ msgstr "Yerel Ağ" #~ msgid "expert" #~ msgstr "uzman" #~ msgid "developer" #~ msgstr "geliştirici" #~ msgid "beginner" #~ msgstr "acemi" #~ msgid "Linear (needed for some SCSI drives)" #~ msgstr "Çizgisel (bazı SCSI sürücüler için gerekli)" #~ msgid "linear" #~ msgstr "çizgisel" #~ msgid "After %s partition %s," #~ msgstr "%s bölümünden sonra %s," #~ msgid "changing type of" #~ msgstr "tipi değiştirilecek" #~ msgid "formatting" #~ msgstr "biçimleniyor" #~ msgid "resizing" #~ msgstr "yeniden boyutlandırılıyor" #~ msgid "Size: %s MB" #~ msgstr "Boyut: %s MB" #~ msgid "Bad kickstart file %s (failed %s)" #~ msgstr "Hatalı kickstart dosyası %s (başarısız %s)" #~ msgid "Password:" #~ msgstr "Parola:" #~ msgid "User name:" #~ msgstr "Kullanıcı adı:" #~ msgid "" #~ "Failed to create an HTP boot floppy.\n" #~ "You may have to restart installation and give ``%s'' at the prompt" #~ msgstr "" #~ "HTP açılış disketi oluşturulamadı.\n" #~ "Kuruluma yeniden başlayın ve açılışta komut satırından ''%s'' girin." #~ msgid "It is necessary to restart installation with the new parameters" #~ msgstr "Kuruluma yeni parametreler girerek tekrar başlamalısınız" #~ msgid "It is necessary to restart installation booting on the floppy" #~ msgstr "Kuruluma disketi yerine takarak tekrar başlamalısınız" #~ msgid "" #~ "Enter a floppy to create an HTP enabled boot\n" #~ "(all data on floppy will be lost)" #~ msgstr "" #~ "Disket sürücüye HTP destekli bir disket oluşturmak için\n" #~ "boş bir disket yerleştirin.\n" #~ "Bu disketteki tüm bilgiler yok olacaktır" #~ msgid "A entry %s already exists" #~ msgstr "%s girdisi zaten mevcut" #~ msgid "Choose install or upgrade" #~ msgstr "Kurulum ya da güncelleme seçimi" #~ msgid "What usage do you want?" #~ msgstr "Hangi kullanımı istiyorsunuz?"