# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR Free Software Foundation, Inc.
# Wachara Chinsettawong <wachara@yahoo.com>, 2001
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
"POT-Creation-Date: 2004-06-14 15:48+0200\n"
"PO-Revision-Date: 2001-09-10 14:24GMT+7\n"
"Last-Translator: Wachara Chinsettawong <wachara@yahoo.com>\n"
"Language-Team: Thai <th@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.9.5\n"

#: ../move/move.pm:402
#, c-format
msgid ""
"Your USB key doesn't have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""

#: ../move/move.pm:412
#, c-format
msgid ""
"We didn't detect any USB key on your system. If you\n"
"plug in an USB key now, Mandrake Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""

#: ../move/move.pm:423
#, c-format
msgid "Need a key to save your data"
msgstr ""

#: ../move/move.pm:425
#, c-format
msgid "Detect USB key again"
msgstr ""

#: ../move/move.pm:426 ../move/move.pm:456
#, c-format
msgid "Continue without USB key"
msgstr ""

#: ../move/move.pm:437 ../move/move.pm:451
#, c-format
msgid "Key isn't writable"
msgstr ""

#: ../move/move.pm:439
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can't safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandrake Move again."
msgstr ""

#: ../move/move.pm:445 help.pm:418 install_steps_interactive.pm:1306
#, c-format
msgid "Reboot"
msgstr ""

#: ../move/move.pm:453
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""

#: ../move/move.pm:455
#, fuzzy, c-format
msgid "Retry"
msgstr "เรียกคืนจากไฟล์"

#: ../move/move.pm:466
#, c-format
msgid "Setting up USB key"
msgstr ""

#: ../move/move.pm:466
#, fuzzy, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr "เลือกระดับระบบรักษาความปลอดภัย"

#: ../move/move.pm:488
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr ""

#: ../move/move.pm:498
#, fuzzy, c-format
msgid "Auto configuration"
msgstr "การคอนฟิก"

#: ../move/move.pm:498
#, fuzzy, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "เลือกระดับระบบรักษาความปลอดภัย"

#: ../move/move.pm:545 ../move/move.pm:601 ../move/move.pm:605
#: ../move/tree/mdk_totem:86 diskdrake/dav.pm:77 diskdrake/hd_gtk.pm:117
#: diskdrake/interactive.pm:220 diskdrake/interactive.pm:233
#: diskdrake/interactive.pm:374 diskdrake/interactive.pm:389
#: diskdrake/interactive.pm:510 diskdrake/interactive.pm:515
#: diskdrake/smbnfs_gtk.pm:42 fsedit.pm:262 install_steps.pm:82
#: install_steps_interactive.pm:40 interactive/http.pm:118
#: interactive/http.pm:119 network/netconnect.pm:936 network/netconnect.pm:939
#: network/netconnect.pm:984 network/netconnect.pm:988
#: network/netconnect.pm:1055 network/netconnect.pm:1105
#: network/netconnect.pm:1110 network/netconnect.pm:1125
#: network/netconnect.pm:1333 printer/printerdrake.pm:213
#: printer/printerdrake.pm:220 printer/printerdrake.pm:245
#: printer/printerdrake.pm:393 printer/printerdrake.pm:398
#: printer/printerdrake.pm:411 printer/printerdrake.pm:421
#: printer/printerdrake.pm:1067 printer/printerdrake.pm:1114
#: printer/printerdrake.pm:1151 printer/printerdrake.pm:1195
#: printer/printerdrake.pm:1199 printer/printerdrake.pm:1213
#: printer/printerdrake.pm:1303 printer/printerdrake.pm:1383
#: printer/printerdrake.pm:1387 printer/printerdrake.pm:1391
#: printer/printerdrake.pm:1440 printer/printerdrake.pm:1497
#: printer/printerdrake.pm:1501 printer/printerdrake.pm:1515
#: printer/printerdrake.pm:1625 printer/printerdrake.pm:1629
#: printer/printerdrake.pm:1666 printer/printerdrake.pm:1731
#: printer/printerdrake.pm:1749 printer/printerdrake.pm:1758
#: printer/printerdrake.pm:1767 printer/printerdrake.pm:1778
#: printer/printerdrake.pm:1840 printer/printerdrake.pm:2285
#: printer/printerdrake.pm:2551 printer/printerdrake.pm:2557
#: printer/printerdrake.pm:3010 printer/printerdrake.pm:3014
#: printer/printerdrake.pm:3018 printer/printerdrake.pm:3421
#: printer/printerdrake.pm:3664 printer/printerdrake.pm:3677
#: printer/printerdrake.pm:3817 printer/printerdrake.pm:3909
#: standalone/drakTermServ:404 standalone/drakTermServ:758
#: standalone/drakTermServ:765 standalone/drakTermServ:960
#: standalone/drakTermServ:1430 standalone/drakTermServ:1435
#: standalone/drakTermServ:1442 standalone/drakTermServ:1453
#: standalone/drakTermServ:1475 standalone/drakauth:36
#: standalone/drakbackup:511 standalone/drakbackup:625
#: standalone/drakbackup:1118 standalone/drakbackup:1151
#: standalone/drakbackup:1644 standalone/drakbackup:1807
#: standalone/drakbackup:2419 standalone/drakbackup:4084
#: standalone/drakbackup:4304 standalone/drakboot:255 standalone/drakbug:267
#: standalone/drakbug:286 standalone/drakbug:292 standalone/drakconnect:621
#: standalone/drakconnect:624 standalone/drakconnect:645
#: standalone/drakfloppy:302 standalone/drakfloppy:306
#: standalone/drakfloppy:312 standalone/drakfont:210 standalone/drakfont:223
#: standalone/drakfont:259 standalone/drakfont:600 standalone/draksplash:21
#: standalone/drakxtv:105 standalone/logdrake:170 standalone/logdrake:467
#: standalone/logdrake:472 standalone/scannerdrake:58
#: standalone/scannerdrake:200 standalone/scannerdrake:259
#: standalone/scannerdrake:688 standalone/scannerdrake:699
#: standalone/scannerdrake:838 standalone/scannerdrake:849
#: standalone/scannerdrake:919 wizards.pm:95 wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "ผิดพลาด"

#: ../move/move.pm:546 install_steps.pm:83
#, c-format
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"มีความผิดพลาดเกิดขึ้น แต่โปรแกรมไม่สามารถแก้ไขได้\n"
"หากทำงานต่ออาจเกิดความเสียหายได้"

#: ../move/move.pm:601 install_steps_interactive.pm:40
#, c-format
msgid "An error occurred"
msgstr "มีปัญหาเกิดขึ้น"

#: ../move/move.pm:607
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandrake Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""

#: ../move/move.pm:622
#, fuzzy, c-format
msgid "Remove system config files"
msgstr "ฟอร์แมต loopback file %s"

#: ../move/move.pm:623
#, c-format
msgid "Simply reboot"
msgstr ""

#: ../move/tree/mdk_totem:60
#, c-format
msgid "You can only run with no CDROM support"
msgstr ""

#: ../move/tree/mdk_totem:81
#, c-format
msgid "Kill those programs"
msgstr ""

#: ../move/tree/mdk_totem:82
#, c-format
msgid "No CDROM support"
msgstr ""

#: ../move/tree/mdk_totem:87
#, c-format
msgid ""
"You can't use another CDROM when the following programs are running: \n"
"%s"
msgstr ""

#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr ""

#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "256 kB"

#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "512 kB"

#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "1 MB"

#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "2 MB"

#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "4 MB"

#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "8 MB"

#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "16 MB"

#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "32 MB"

#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "64 MB หรือมากกว่า"

#: Xconfig/card.pm:151
#, c-format
msgid "X server"
msgstr "X เซิร์ฟเวอร์"

#: Xconfig/card.pm:152
#, fuzzy, c-format
msgid "Choose an X server"
msgstr "เลือก X เซิร์ฟเวอร์"

#: Xconfig/card.pm:184
#, c-format
msgid "Multi-head configuration"
msgstr "Multi-head configuration"

#: Xconfig/card.pm:185
#, fuzzy, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"เครื่องของคุณสนับสนุนการคอนฟิกแบบ multihead \n"
"คุณต้องการทำอะไร?"

#: Xconfig/card.pm:251
#, fuzzy, c-format
msgid "Can't install XFree package: %s"
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: Xconfig/card.pm:261
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "เลือกขนาดหน่วยความจำของกราฟฟิคการ์ด"

#: Xconfig/card.pm:332
#, c-format
msgid "XFree configuration"
msgstr "การคอนฟิก XFree"

#: Xconfig/card.pm:334
#, c-format
msgid "Which configuration of XFree do you want to have?"
msgstr "XFree ชนิดใหนที่คุณต้องการมี"

#: Xconfig/card.pm:367
#, c-format
msgid "Configure all heads independently"
msgstr "Configure all heads independently"

#: Xconfig/card.pm:368
#, c-format
msgid "Use Xinerama extension"
msgstr "Use Xinerama extension"

#: Xconfig/card.pm:373
#, fuzzy, c-format
msgid "Configure only card \"%s\"%s"
msgstr "คอนฟิกเฉพาะการ์ด \"%s\" (%s)"

#: Xconfig/card.pm:385 Xconfig/various.pm:23
#, c-format
msgid "XFree %s"
msgstr "XFree %s"

#: Xconfig/card.pm:392 Xconfig/various.pm:22
#, c-format
msgid "XFree %s with 3D hardware acceleration"
msgstr "XFree %s with 3D hardware acceleration"

#: Xconfig/card.pm:394
#, c-format
msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr "Your card can have 3D hardware acceleration support with XFree %s."

#: Xconfig/card.pm:400
#, c-format
msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "XFree %s with EXPERIMENTAL 3D hardware acceleration"

#: Xconfig/card.pm:402
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."

#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:112 any.pm:833
#, c-format
msgid "Custom"
msgstr "แบบปรับแก้ได้ (Customized) "

#: Xconfig/main.pm:115 diskdrake/dav.pm:28 help.pm:14
#: install_steps_interactive.pm:83 printer/printerdrake.pm:608
#: printer/printerdrake.pm:4076 standalone/draksplash:120
#: standalone/harddrake2:194 standalone/logdrake:175
#: standalone/scannerdrake:450
#, c-format
msgid "Quit"
msgstr "ออก"

#: Xconfig/main.pm:117
#, fuzzy, c-format
msgid "Graphic Card"
msgstr "กราฟฟิคการ์ด"

#: Xconfig/main.pm:120 Xconfig/monitor.pm:106
#, c-format
msgid "Monitor"
msgstr "จอภาพ"

#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:217
#, c-format
msgid "Resolution"
msgstr "ขนาดจอภาพ"

#: Xconfig/main.pm:128
#, c-format
msgid "Test"
msgstr ""

#: Xconfig/main.pm:133 diskdrake/dav.pm:67 diskdrake/interactive.pm:415
#: diskdrake/removable.pm:25 diskdrake/smbnfs_gtk.pm:80
#: standalone/drakfont:494 standalone/drakfont:554 standalone/harddrake2:191
#, fuzzy, c-format
msgid "Options"
msgstr "/Options/ทดลอง"

#: Xconfig/main.pm:177
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"เก็บการเปลี่ยนแปลง\n"
"การปรับแต่งปัจจุบัณคือ:\n"
"\n"
"%s"

#: Xconfig/monitor.pm:107
#, fuzzy, c-format
msgid "Choose a monitor for head #%d"
msgstr "เลือกจอภาพ"

#: Xconfig/monitor.pm:107
#, c-format
msgid "Choose a monitor"
msgstr "เลือกจอภาพ"

#: Xconfig/monitor.pm:113
#, c-format
msgid "Plug'n Play"
msgstr ""

#: Xconfig/monitor.pm:114 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "Generic"

#: Xconfig/monitor.pm:115 standalone/drakconnect:569 standalone/harddrake2:73
#: standalone/harddrake2:74
#, fuzzy, c-format
msgid "Vendor"
msgstr "ยกเลิก"

#: Xconfig/monitor.pm:125
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr ""

#: Xconfig/monitor.pm:130
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"ขั้นตอนต่อไปนี้จะต้องใส่พารามิเตอร์ที่มีความสำคัญสองตัว ได้แก่อัตราความถี่\n"
"ของการสแกนภาพตามแนวตั้ง (vertical refresh rate) ซึ่งเป็นความถี่ที่มีการ\n"
"รีเฟรชจอภาพทั้งจอ และการอัตราสแกนภาพตามแนวนอน ซึ่งเป็นอัตราของการวาดของ\n"
"เส้นกวาดสิ่งที่สำคัญมากก็คือ คุณจะต้องระบุชนิดของหน้าจอซึ่งอัตราความถี่ที่\n"
"ไม่เกินความสามารถของจอภาพ ไม่เช่นนั้นอาจเกิดความเสียหายกับจอภาพได้\n"
"หากไม่แน่ใจโปรดเลือกเซ็ตอัพแบบมาตรฐาน"

#: Xconfig/monitor.pm:137
#, c-format
msgid "Horizontal refresh rate"
msgstr "อัตราการรีเฟรชตามแนวนอน"

#: Xconfig/monitor.pm:138
#, c-format
msgid "Vertical refresh rate"
msgstr "อัตราการรีเฟรชตามแนวตั้ง"

#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 สี (8 บิต)"

#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "สามหมื่นสองพันสี (15 บิต)"

#: Xconfig/resolution_and_depth.pm:14
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "หกหมื่นห้าพันสี (16 บิต)"

#: Xconfig/resolution_and_depth.pm:15
#, c-format
msgid "16 million colors (24 bits)"
msgstr "สิบหกล้านสี (24 บิต)"

#: Xconfig/resolution_and_depth.pm:130
#, c-format
msgid "Resolutions"
msgstr "ความละเอียด"

#: Xconfig/resolution_and_depth.pm:264
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "เลือกขนาดจอภาพและความละเอียดสี"

#: Xconfig/resolution_and_depth.pm:265
#, c-format
msgid "Graphics card: %s"
msgstr "กราฟฟิคการ์ด: %s"

#: Xconfig/resolution_and_depth.pm:278 interactive.pm:403
#: interactive/gtk.pm:760 interactive/http.pm:103 interactive/http.pm:157
#: interactive/newt.pm:308 interactive/newt.pm:410 interactive/stdio.pm:39
#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
#: standalone/drakbackup:3941 standalone/drakbackup:4001
#: standalone/drakbackup:4045 standalone/drakconnect:165
#: standalone/drakconnect:799 standalone/drakconnect:886
#: standalone/drakconnect:985 standalone/drakups:194
#: standalone/net_monitor:307 ugtk2.pm:413 ugtk2.pm:510 ugtk2.pm:1084
#: ugtk2.pm:1107
#, c-format
msgid "Ok"
msgstr "ตกลง"

#: Xconfig/resolution_and_depth.pm:278 any.pm:883 diskdrake/smbnfs_gtk.pm:81
#: help.pm:197 help.pm:457 install_steps_gtk.pm:490
#: install_steps_interactive.pm:775 interactive.pm:404 interactive/gtk.pm:764
#: interactive/http.pm:104 interactive/http.pm:161 interactive/newt.pm:307
#: interactive/newt.pm:414 interactive/stdio.pm:39 interactive/stdio.pm:142
#: interactive/stdio.pm:176 printer/printerdrake.pm:3088
#: standalone/drakautoinst:217 standalone/drakbackup:3871
#: standalone/drakbackup:3929 standalone/drakconnect:164
#: standalone/drakconnect:884 standalone/drakconnect:984
#: standalone/drakfont:663 standalone/drakfont:740 standalone/drakups:201
#: standalone/logdrake:175 standalone/net_monitor:303 ugtk2.pm:407
#: ugtk2.pm:508 ugtk2.pm:517 ugtk2.pm:1084
#, c-format
msgid "Cancel"
msgstr "ยกเลิก"

#: Xconfig/resolution_and_depth.pm:278 diskdrake/hd_gtk.pm:154
#: install_steps_gtk.pm:269 install_steps_gtk.pm:670 interactive.pm:498
#: interactive/gtk.pm:624 interactive/gtk.pm:626 standalone/drakTermServ:304
#: standalone/drakbackup:3867 standalone/drakbug:157
#: standalone/drakconnect:160 standalone/drakconnect:239
#: standalone/drakfont:512 standalone/drakperm:134 standalone/draksec:296
#: standalone/harddrake2:190 ugtk2.pm:1197 ugtk2.pm:1198
#, c-format
msgid "Help"
msgstr "ความช่วยเหลือ"

#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "ทดสอบการคอนฟิก"

#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"

#: Xconfig/test.pm:31
#, fuzzy, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "ระวัง การทดสอบการ์ดแสดงผลอาจทำให้คอมพิวเตอร์หยุดการทำงาน"

#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""

#: Xconfig/test.pm:133
#, fuzzy, c-format
msgid "Leaving in %d seconds"
msgstr "%d วินาที"

#: Xconfig/test.pm:133
#, fuzzy, c-format
msgid "Is this the correct setting?"
msgstr "ถูกต้องหรือไม่?"

#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "เลือกชนิดของคีย์บอร์ด: %s\n"

#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "เลือกชนิดของเม้าส์: %s\n"

#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "ดีไวซ์ของเม้าส์: %s\n"

#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "จอภาพ: %s\n"

#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "อัตราความถี่กวาดตามแนวนอน: %s\n"

#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "อัตราความถี่กวาดตามแนวตั้ง: %s\n"

#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "กราฟฟิคการ์ด: %s\n"

#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "ขนาดหน่วยความจำของกราฟฟิคการ์ด: %s kB\n"

#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr "อความละเอียดสี: %s\n"

#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "ความละเอียดของภาพ %s\n"

#: Xconfig/various.pm:43
#, c-format
msgid "XFree86 driver: %s\n"
msgstr "ไดร์เวอร์ XFree86: %s\n"

#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "ให้เป็นกราฟฟิคเมื่อเริ่มต้น"

#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(XFree) upon booting.\n"
"Would you like XFree to start when you reboot?"
msgstr ""
"โปรแกรมจะกำหนดให้คอมพิวเตอร์ของคุณใช้งานแบบกราฟฟิคเมื่อเริ่มบูต\n"
"คุณต้องการจะให้ทำงานแบบกราฟฟิคเมื่อรีบูตหรือไม่?"

#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""

#: Xconfig/various.pm:99
#, fuzzy, c-format
msgid "What norm is your TV using?"
msgstr "การติดต่อแบบ ISDN ของคุณเป็นแบบใด"

#: any.pm:103 harddrake/sound.pm:150 interactive.pm:441 standalone/drakbug:259
#: standalone/drakconnect:167 standalone/draksec:56 standalone/drakups:90
#: standalone/drakxtv:90 standalone/harddrake2:140
#: standalone/service_harddrake:126
#, c-format
msgid "Please wait"
msgstr "โปรดรอสักครู่"

#: any.pm:103
#, fuzzy, c-format
msgid "Bootloader installation in progress"
msgstr "การติดตั้ง Bootloader"

#: any.pm:142
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""

#: any.pm:165 any.pm:197 help.pm:800
#, c-format
msgid "First sector of drive (MBR)"
msgstr "เซ็กเตอร์แรกของไดรว์ (MBR)"

#: any.pm:166
#, fuzzy, c-format
msgid "First sector of the root partition"
msgstr "เซ็กเตอร์แรกของบูตพาร์ติชั่น"

#: any.pm:168
#, fuzzy, c-format
msgid "On Floppy"
msgstr "บันทึกลงแผ่นฟล้อปปี้"

#: any.pm:170 help.pm:768 help.pm:800 printer/printerdrake.pm:3418
#, c-format
msgid "Skip"
msgstr "ข้ามไป"

#: any.pm:175
#, c-format
msgid "SILO Installation"
msgstr "การติดตั้ง SILO"

#: any.pm:175
#, c-format
msgid "LILO/grub Installation"
msgstr "การติดตั้ง LILO/grub"

#: any.pm:176
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "คุณจะติดตั้งบูตโหลดเดอร์ไว้ที่ไหน?"

#: any.pm:197
#, c-format
msgid "First sector of boot partition"
msgstr "เซ็กเตอร์แรกของบูตพาร์ติชั่น"

#: any.pm:209
#, c-format
msgid "Boot Style Configuration"
msgstr "Boot Style Configuration"

#: any.pm:211 any.pm:248
#, c-format
msgid "Bootloader main options"
msgstr "อ๊อปชั่นหลักของ Bootloader"

#: any.pm:215
#, c-format
msgid "Give the ram size in MB"
msgstr "ให้ป้อนข้อมูลของขนาดหน่วยความจำเป็น Mb"

#: any.pm:217
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr "อ็อปชั่น ``อ๊อปชั่นจำเพาะที่ใช้กับคอมมานด์ไลน์'' จะต้องใส่รหัสผ่านด้วย"

#: any.pm:218 any.pm:531 install_steps_interactive.pm:1150
#, c-format
msgid "The passwords do not match"
msgstr "รหัสผ่านไม่เหมือนกัน"

#: any.pm:218 any.pm:531 diskdrake/interactive.pm:1262
#: install_steps_interactive.pm:1150
#, c-format
msgid "Please try again"
msgstr "โปรดลองอีกครั้ง"

#: any.pm:223 any.pm:251 help.pm:768
#, c-format
msgid "Bootloader to use"
msgstr "Bootloader ที่จะใช้"

#: any.pm:225
#, c-format
msgid "Bootloader installation"
msgstr "การติดตั้ง Bootloader"

#: any.pm:227 any.pm:253 help.pm:768
#, c-format
msgid "Boot device"
msgstr "อุปกรณ์บูต"

#: any.pm:229
#, c-format
msgid "Delay before booting default image"
msgstr "หน่วงเวลาก่อนทำการบูตอิมเมจที่ใช้"

#: any.pm:230 help.pm:768
#, fuzzy, c-format
msgid "Enable ACPI"
msgstr "Enable CD Boot?"

#: any.pm:232 help.pm:768
#, c-format
msgid "Force no APIC"
msgstr ""

#: any.pm:234
#, c-format
msgid "Force No Local APIC"
msgstr ""

#: any.pm:236 any.pm:558 diskdrake/smbnfs_gtk.pm:180
#: install_steps_interactive.pm:1155 network/netconnect.pm:574
#: printer/printerdrake.pm:1374 printer/printerdrake.pm:1494
#: standalone/drakbackup:1626 standalone/drakbackup:3496
#: standalone/drakups:278
#, c-format
msgid "Password"
msgstr "รหัสผ่าน"

#: any.pm:237 any.pm:559 install_steps_interactive.pm:1156
#, c-format
msgid "Password (again)"
msgstr "รหัสผ่าน (ใส่อีกครั้ง)"

#: any.pm:238
#, c-format
msgid "Restrict command line options"
msgstr "อ็อปชั่นจำเพาะที่ใช้กับคอมมานด์ไลน์"

#: any.pm:238
#, c-format
msgid "restrict"
msgstr "จำเพาะ"

#: any.pm:240
#, c-format
msgid "Clean /tmp at each boot"
msgstr "ลบ /tmp ตอน boot ทุกครั้ง"

#: any.pm:241
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "กำหนดค่าหน่วยความจำ (RAM) ให้ถูกต้องถ้าต้องการ (ระบบพบ %d MB)"

#: any.pm:243
#, c-format
msgid "Enable multiple profiles"
msgstr "Enable multiple profiles"

#: any.pm:252
#, c-format
msgid "Init Message"
msgstr "ข้อความ init"

#: any.pm:254
#, c-format
msgid "Open Firmware Delay"
msgstr "Open Firmware Delay"

#: any.pm:255
#, c-format
msgid "Kernel Boot Timeout"
msgstr "Kernel Boot Timeout"

#: any.pm:256
#, c-format
msgid "Enable CD Boot?"
msgstr "Enable CD Boot?"

#: any.pm:257
#, c-format
msgid "Enable OF Boot?"
msgstr "Enable OF Boot?"

#: any.pm:258
#, c-format
msgid "Default OS?"
msgstr "Default OS?"

#: any.pm:302
#, c-format
msgid "Image"
msgstr "Image"

#: any.pm:303 any.pm:312
#, c-format
msgid "Root"
msgstr "Root"

#: any.pm:304 any.pm:325
#, c-format
msgid "Append"
msgstr "Append"

#: any.pm:306
#, c-format
msgid "Video mode"
msgstr "โหมดของการแสดงผล"

#: any.pm:308
#, c-format
msgid "Initrd"
msgstr "Initrd"

#: any.pm:317 any.pm:322 any.pm:324
#, c-format
msgid "Label"
msgstr "Label"

#: any.pm:319 any.pm:329 harddrake/v4l.pm:275 standalone/drakfloppy:89
#: standalone/drakfloppy:95
#, c-format
msgid "Default"
msgstr "Default"

#: any.pm:326
#, c-format
msgid "Initrd-size"
msgstr "Initrd-size"

#: any.pm:328
#, c-format
msgid "NoVideo"
msgstr "NoVideo"

#: any.pm:339
#, c-format
msgid "Empty label not allowed"
msgstr "ไม่อนุญาตให้มีหัวข้อว่าง"

#: any.pm:340
#, c-format
msgid "You must specify a kernel image"
msgstr ""

#: any.pm:340
#, fuzzy, c-format
msgid "You must specify a root partition"
msgstr "คุณจะต้องมีพาร์ติชั่นสวอป"

#: any.pm:341
#, c-format
msgid "This label is already used"
msgstr "หัวข้อนี้ถูกใช้ไปเรียบร้อยแล้ว"

#: any.pm:354
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "ข้อมูลประเภทใดที่คุณต้องการเพิ่ม"

#: any.pm:355
#, c-format
msgid "Linux"
msgstr "ลีนุกซ์"

#: any.pm:355
#, c-format
msgid "Other OS (SunOS...)"
msgstr "ระบบปฏิบัติการอื่นๆ (SunOS...)"

#: any.pm:356
#, c-format
msgid "Other OS (MacOS...)"
msgstr "ระบบปฏิบัติการอื่นๆ (Mac OS...)"

#: any.pm:356
#, c-format
msgid "Other OS (Windows...)"
msgstr "ระบบปฏิบัติการอื่นๆ (วินโดวส์...)"

#: any.pm:384
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"ต่อไปนี้เป็นข้อมูลต่างๆ\n"
"คุณสามารถเพิ่มข้อมูลหรือแก้ไขข้อมูลที่มีได้"

#: any.pm:516
#, c-format
msgid "access to X programs"
msgstr ""

#: any.pm:517
#, c-format
msgid "access to rpm tools"
msgstr ""

#: any.pm:518
#, c-format
msgid "allow \"su\""
msgstr ""

#: any.pm:519
#, c-format
msgid "access to administrative files"
msgstr ""

#: any.pm:520
#, c-format
msgid "access to network tools"
msgstr ""

#: any.pm:521
#, c-format
msgid "access to compilation tools"
msgstr ""

#: any.pm:527
#, c-format
msgid "(already added %s)"
msgstr "(เพิ่ม %s เรียบร้อยแล้ว)"

#: any.pm:532
#, c-format
msgid "This password is too simple"
msgstr "รหัสผ่านนี้ง่ายต่อการเดา"

#: any.pm:533
#, c-format
msgid "Please give a user name"
msgstr "โปรดป้อนชื่อผู้ใช้"

#: any.pm:534
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "ชื่อผู้ใช้จะสามารถมีได้เฉพาะตัวอักษรตัวเล็ก ตัวเลข '-' และ '_'"

#: any.pm:535
#, fuzzy, c-format
msgid "The user name is too long"
msgstr "ชื่อผู้ใช้นี้ได้ถูกเพิ่มลงไปในระบบเรียบร้อยแล้ว"

#: any.pm:536
#, c-format
msgid "This user name has already been added"
msgstr "ชื่อผู้ใช้นี้ได้ถูกเพิ่มลงไปในระบบเรียบร้อยแล้ว"

#: any.pm:540
#, c-format
msgid "Add user"
msgstr "เพิ่มผู้ใช้"

#: any.pm:541
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"ให้ใส่ผู้ใช้\n"
"%s"

#: any.pm:544 diskdrake/dav.pm:68 diskdrake/hd_gtk.pm:158
#: diskdrake/removable.pm:27 diskdrake/smbnfs_gtk.pm:82 help.pm:544
#: interactive/http.pm:152 printer/printerdrake.pm:165
#: printer/printerdrake.pm:352 printer/printerdrake.pm:4076
#: standalone/drakbackup:2708 standalone/scannerdrake:641
#: standalone/scannerdrake:791
#, c-format
msgid "Done"
msgstr "ทำเรียบร้อยแล้ว"

#: any.pm:545 help.pm:52
#, c-format
msgid "Accept user"
msgstr "ยอมรับผู้ใช้"

#: any.pm:556
#, c-format
msgid "Real name"
msgstr "ชื่อเต็ม"

#: any.pm:557 help.pm:52 printer/printerdrake.pm:1373
#: printer/printerdrake.pm:1493
#, c-format
msgid "User name"
msgstr "ชื่อผู้ใช้"

#: any.pm:560
#, c-format
msgid "Shell"
msgstr "เชลล์ที่ใช้"

#: any.pm:562
#, c-format
msgid "Icon"
msgstr "Icon"

#: any.pm:603 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "Autologin"

#: any.pm:604
#, fuzzy, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr ""
"ผมไม่สามารถทำให้ท่านเข้าทำงานโดยใช้ชื่อคนคนหนึ่งแบบอัตโนมัติ\n"
"ถ้าคุณไม่ต้องการใช้งานรูปแบบนี้กรุณากดปุ่มยกเลิก"

#: any.pm:605 help.pm:52
#, fuzzy, c-format
msgid "Do you want to use this feature?"
msgstr "คุณต้องการใช้ aboot หรือไม่"

#: any.pm:606
#, c-format
msgid "Choose the default user:"
msgstr "เลือกผู้ใช้ default"

#: any.pm:607
#, c-format
msgid "Choose the window manager to run:"
msgstr "เลือก window manager:"

#: any.pm:619
#, fuzzy, c-format
msgid "Please choose a language to use."
msgstr "กรุณาเลือกภาษาที่ต้องการใช้"

#: any.pm:640
#, c-format
msgid ""
"Mandrakelinux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr "คุณสามารถเลือกภาษาอื่นซึ่งจะสามารถใช้ได้หลังติดตั้ง"

#: any.pm:658 help.pm:660
#, c-format
msgid "Use Unicode by default"
msgstr ""

#: any.pm:659 help.pm:660
#, fuzzy, c-format
msgid "All languages"
msgstr "เลือกภาษาที่คุณใช้"

#: any.pm:698 help.pm:581 help.pm:991 install_steps_interactive.pm:895
#, fuzzy, c-format
msgid "Country / Region"
msgstr "ขนาดจอภาพ"

#: any.pm:699
#, fuzzy, c-format
msgid "Please choose your country."
msgstr "คุณมีเม้าส์ชนิดใด"

#: any.pm:701
#, fuzzy, c-format
msgid "Here is the full list of available countries"
msgstr "ต่อไปนี้คือ keyboard ที่ใช้ได้"

#: any.pm:702 diskdrake/interactive.pm:297 help.pm:544 help.pm:581 help.pm:621
#: help.pm:991 install_steps_interactive.pm:114
#, c-format
msgid "More"
msgstr "More"

#: any.pm:833
#, fuzzy, c-format
msgid "No sharing"
msgstr "ไม่มีเครื่องพิมพ์"

#: any.pm:833
#, fuzzy, c-format
msgid "Allow all users"
msgstr "เพิ่มผู้ใช้"

#: any.pm:837
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""

#: any.pm:849
#, c-format
msgid ""
"NFS: the traditional Unix file sharing system, with less support on Mac and "
"Windows."
msgstr ""

#: any.pm:852
#, c-format
msgid ""
"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
"systems."
msgstr ""

#: any.pm:860
#, c-format
msgid ""
"You can export using NFS or SMB. Please select which you would like to use."
msgstr ""

#: any.pm:883
#, c-format
msgid "Launch userdrake"
msgstr ""

#: any.pm:885
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""

#: authentication.pm:12
#, fuzzy, c-format
msgid "Local files"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: authentication.pm:12
#, c-format
msgid "LDAP"
msgstr ""

#: authentication.pm:12
#, fuzzy, c-format
msgid "NIS"
msgstr "ใช้ NIS"

#: authentication.pm:12 authentication.pm:72
#, fuzzy, c-format
msgid "Windows Domain"
msgstr "โดเมน NIS"

#: authentication.pm:12
#, c-format
msgid "Active Directory"
msgstr ""

#: authentication.pm:38
#, fuzzy, c-format
msgid "Authentication LDAP"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#: authentication.pm:39
#, c-format
msgid "LDAP Base dn"
msgstr ""

#: authentication.pm:40
#, fuzzy, c-format
msgid "LDAP Server"
msgstr "เซิร์ฟเวอร์ NIS"

#: authentication.pm:50
#, fuzzy, c-format
msgid "Authentication Active Directory"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#: authentication.pm:51 diskdrake/smbnfs_gtk.pm:181
#, fuzzy, c-format
msgid "Domain"
msgstr "โดเมน NIS"

#: authentication.pm:52 diskdrake/dav.pm:65 help.pm:137
#, c-format
msgid "Server"
msgstr "เซิร์ฟเวอร์"

#: authentication.pm:53
#, c-format
msgid "LDAP users database"
msgstr ""

#: authentication.pm:54
#, c-format
msgid "LDAP user allowed to browse the Active Directory"
msgstr ""

#: authentication.pm:55
#, fuzzy, c-format
msgid "Password for user"
msgstr "รหัสผ่าน"

#: authentication.pm:62
#, fuzzy, c-format
msgid "Authentication NIS"
msgstr "การตรวจสอบสิทธิ์การใช้งานของ NIS"

#: authentication.pm:63
#, c-format
msgid "NIS Domain"
msgstr "โดเมน NIS"

#: authentication.pm:64
#, c-format
msgid "NIS Server"
msgstr "เซิร์ฟเวอร์ NIS"

#: authentication.pm:69
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""

#: authentication.pm:71
#, fuzzy, c-format
msgid "Authentication Windows Domain"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#: authentication.pm:73
#, fuzzy, c-format
msgid "Domain Admin User Name"
msgstr "ชื่อโดเมน"

#: authentication.pm:74
#, c-format
msgid "Domain Admin Password"
msgstr ""

#: authentication.pm:149
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr ""

# NOTE: this message will be displayed at boot time; that is
# only the ascii charset will be available on most machines
# so use only 7bit for this message (and do transliteration or
# leave it in English, as it is the best for your language)
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:532
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""

#: bootloader.pm:663
#, c-format
msgid "SILO"
msgstr "SILO"

#: bootloader.pm:665 help.pm:768
#, c-format
msgid "LILO with graphical menu"
msgstr "LILO แบบ graphical menu"

#: bootloader.pm:666 help.pm:768
#, c-format
msgid "LILO with text menu"
msgstr "LILO แบบ text menu"

#: bootloader.pm:668
#, c-format
msgid "Grub"
msgstr "Grub"

#: bootloader.pm:670
#, c-format
msgid "Yaboot"
msgstr "Yaboot"

#: bootloader.pm:1142
#, c-format
msgid "not enough room in /boot"
msgstr "ไม่มีที่พอใน /boot"

#: bootloader.pm:1170
#, fuzzy, c-format
msgid "You can't install the bootloader on a %s partition\n"
msgstr "คุณจะติดตั้งบูตโหลดเดอร์ไว้ที่ไหน?"

#: bootloader.pm:1214
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr ""

#: bootloader.pm:1221
#, c-format
msgid ""
"The bootloader can't be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr ""

#: bootloader.pm:1222
#, fuzzy, c-format
msgid "Re-install Boot Loader"
msgstr "ติดตั้งบูตโหลดเดอร์"

#: common.pm:125
#, c-format
msgid "KB"
msgstr "KB"

#: common.pm:125
#, c-format
msgid "MB"
msgstr "MB"

#: common.pm:125
#, c-format
msgid "GB"
msgstr "GB"

#: common.pm:133
#, c-format
msgid "TB"
msgstr "TB"

#: common.pm:141
#, c-format
msgid "%d minutes"
msgstr "%d นาที"

#: common.pm:143
#, c-format
msgid "1 minute"
msgstr "1 นาที"

#: common.pm:145
#, c-format
msgid "%d seconds"
msgstr "%d วินาที"

#: common.pm:197
#, fuzzy, c-format
msgid "Can't make screenshots before partitioning"
msgstr "โปรแกรมไม่สามารถเพิ่มพาร์ติชั่นได้อีก"

#: common.pm:204
#, fuzzy, c-format
msgid "Screenshots will be available after install in %s"
msgstr "คุณสามารถเลือกภาษาอื่นซึ่งจะสามารถใช้ได้หลังติดตั้ง"

#: common.pm:269
#, c-format
msgid "kdesu missing"
msgstr "ไม่มี kdesu "

#: common.pm:272
#, c-format
msgid "consolehelper missing"
msgstr ""

#: crypto.pm:14 crypto.pm:28 lang.pm:240 network/adsl_consts.pm:44
#: network/adsl_consts.pm:55 network/adsl_consts.pm:65
#: network/adsl_consts.pm:75 network/adsl_consts.pm:86
#: network/adsl_consts.pm:97 network/adsl_consts.pm:107
#: network/adsl_consts.pm:117 network/adsl_consts.pm:264
#: network/netconnect.pm:46
#, fuzzy, c-format
msgid "France"
msgstr "ฝรั่งเศษ"

#: crypto.pm:15 lang.pm:216
#, c-format
msgid "Costa Rica"
msgstr "คอสตาริกา"

#: crypto.pm:16 crypto.pm:29 lang.pm:188 network/adsl_consts.pm:26
#: network/adsl_consts.pm:36 network/netconnect.pm:49
#, fuzzy, c-format
msgid "Belgium"
msgstr "เบลเยี่ยม"

#: crypto.pm:17 crypto.pm:30 lang.pm:221
#, c-format
msgid "Czech Republic"
msgstr "สาธารณรัฐเช็ค"

#: crypto.pm:18 crypto.pm:31 lang.pm:222 network/adsl_consts.pm:134
#: network/adsl_consts.pm:142
#, fuzzy, c-format
msgid "Germany"
msgstr "เยอรมัน"

#: crypto.pm:19 crypto.pm:32 lang.pm:253
#, fuzzy, c-format
msgid "Greece"
msgstr "กรีก"

#: crypto.pm:20 crypto.pm:33 lang.pm:326
#, fuzzy, c-format
msgid "Norway"
msgstr "นอร์เวย์"

#: crypto.pm:21 crypto.pm:34 lang.pm:355 network/adsl_consts.pm:240
#, fuzzy, c-format
msgid "Sweden"
msgstr "สวีเดน"

#: crypto.pm:22 crypto.pm:36 lang.pm:325 network/adsl_consts.pm:178
#: network/netconnect.pm:47
#, c-format
msgid "Netherlands"
msgstr "เนเธอร์แลนด์"

#: crypto.pm:23 crypto.pm:37 lang.pm:273 network/adsl_consts.pm:158
#: network/adsl_consts.pm:168 network/netconnect.pm:48 standalone/drakxtv:45
#, fuzzy, c-format
msgid "Italy"
msgstr "อิตาลี"

#: crypto.pm:24 crypto.pm:38 lang.pm:181 network/adsl_consts.pm:20
#, fuzzy, c-format
msgid "Austria"
msgstr "พอร์ตอนุกรม"

#: crypto.pm:35 crypto.pm:65 lang.pm:389 network/netconnect.pm:50
#, c-format
msgid "United States"
msgstr "สหรัฐอเมริกา"

#: diskdrake/dav.pm:19
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""

#: diskdrake/dav.pm:27
#, fuzzy, c-format
msgid "New"
msgstr "ใหม่"

#: diskdrake/dav.pm:63 diskdrake/interactive.pm:422 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Unmount"
msgstr "เลิกเม้าท์์ระบบไฟล์"

#: diskdrake/dav.pm:64 diskdrake/interactive.pm:419 diskdrake/smbnfs_gtk.pm:76
#, c-format
msgid "Mount"
msgstr "เม้าท์"

#: diskdrake/dav.pm:66 diskdrake/interactive.pm:413
#: diskdrake/interactive.pm:621 diskdrake/interactive.pm:640
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
#, c-format
msgid "Mount point"
msgstr "กำหนดจุดเม้าท์"

#: diskdrake/dav.pm:85
#, fuzzy, c-format
msgid "Please enter the WebDAV server URL"
msgstr "กรุณาทดสอบเม้าส์"

#: diskdrake/dav.pm:89
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr ""

#: diskdrake/dav.pm:111
#, fuzzy, c-format
msgid "Server: "
msgstr "เซิร์ฟเวอร์"

#: diskdrake/dav.pm:112 diskdrake/interactive.pm:474
#: diskdrake/interactive.pm:1154 diskdrake/interactive.pm:1232
#, c-format
msgid "Mount point: "
msgstr "จุดเม้าท์: "

#: diskdrake/dav.pm:113 diskdrake/interactive.pm:1240
#, fuzzy, c-format
msgid "Options: %s"
msgstr "พาร์ติชั่น %s"

#: diskdrake/hd_gtk.pm:96 diskdrake/interactive.pm:1000
#: diskdrake/interactive.pm:1010 diskdrake/interactive.pm:1070
#, c-format
msgid "Read carefully!"
msgstr "โปรดอ่านอย่างถี่ถ้วน!"

#: diskdrake/hd_gtk.pm:96
#, c-format
msgid "Please make a backup of your data first"
msgstr "กรุณาทำ backup ก่อน"

#: diskdrake/hd_gtk.pm:99
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"ถ้าคุณต้องการใช้ aboot ควรระวังว่าต้องมีที่ว่าง (2048 sectors) \n"
"ด้านหน้าของ disk"

#: diskdrake/hd_gtk.pm:156 help.pm:544
#, c-format
msgid "Wizard"
msgstr "Wizard"

#: diskdrake/hd_gtk.pm:189
#, c-format
msgid "Choose action"
msgstr "เลือกกิจกรรม"

#: diskdrake/hd_gtk.pm:193
#, fuzzy, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"ถ้าคุณมี พาร์ติชั่น FAT ที่ใหญ่ พาร์ติชั่น เดียว\n"
"(ซึ่งโดยปกติ Microsoft Dos/Windows ใข้)\n"
"ผมแนะนำให้คุณปรับขนาด พาร์ติชั่น เสียก่อน\n"
"(กดที่มันแล้วกด \"ปรับขนาด\")"

#: diskdrake/hd_gtk.pm:195
#, c-format
msgid "Please click on a partition"
msgstr "โปรดเลือกพาร์ติชั่น"

#: diskdrake/hd_gtk.pm:209 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:477
#: standalone/drakbackup:2942 standalone/drakbackup:3004
#, c-format
msgid "Details"
msgstr "รายละเอียด"

#: diskdrake/hd_gtk.pm:255
#, fuzzy, c-format
msgid "No hard drives found"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "Ext2"
msgstr "Ext2"

#: diskdrake/hd_gtk.pm:326
#, fuzzy, c-format
msgid "Journalised FS"
msgstr "การเม้าท์ล้มเหลว"

#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "Swap"
msgstr "สวอป"

#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "SunOS"
msgstr "SunOS"

#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "HFS"
msgstr "HFS"

#: diskdrake/hd_gtk.pm:326
#, fuzzy, c-format
msgid "Windows"
msgstr "โดเมน NIS"

#: diskdrake/hd_gtk.pm:327 install_steps_gtk.pm:329 mouse.pm:167
#: services.pm:164 standalone/drakbackup:1582 standalone/drakperm:254
#, c-format
msgid "Other"
msgstr "อื่นๆ"

#: diskdrake/hd_gtk.pm:327 diskdrake/interactive.pm:1172
#, c-format
msgid "Empty"
msgstr "ว่าง"

#: diskdrake/hd_gtk.pm:331
#, c-format
msgid "Filesystem types:"
msgstr "ประเภทของระบบไฟล์:"

#: diskdrake/hd_gtk.pm:348 diskdrake/hd_gtk.pm:350 diskdrake/hd_gtk.pm:353
#, c-format
msgid "Use ``%s'' instead"
msgstr "ใช้ ``%s'' แทน"

#: diskdrake/hd_gtk.pm:348 diskdrake/hd_gtk.pm:353
#: diskdrake/interactive.pm:414 diskdrake/interactive.pm:574
#: diskdrake/removable.pm:26 diskdrake/removable.pm:49
#: standalone/harddrake2:72
#, c-format
msgid "Type"
msgstr "ประเภท"

#: diskdrake/hd_gtk.pm:348 diskdrake/interactive.pm:436
#, c-format
msgid "Create"
msgstr "สร้าง"

#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: diskdrake/hd_gtk.pm:350 diskdrake/interactive.pm:423
#: standalone/drakperm:124 standalone/printerdrake:236
#, c-format
msgid "Delete"
msgstr "ลบ"

#: diskdrake/hd_gtk.pm:353
#, c-format
msgid "Use ``Unmount'' first"
msgstr "ใช้ ``Unmount'' ก่อน"

#: diskdrake/interactive.pm:184
#, fuzzy, c-format
msgid "Choose another partition"
msgstr "สร้างพาร์ติชั่นใหม่"

#: diskdrake/interactive.pm:184
#, fuzzy, c-format
msgid "Choose a partition"
msgstr "เลือกกิจกรรม"

#: diskdrake/interactive.pm:213
#, fuzzy, c-format
msgid "Exit"
msgstr "Ext2"

#: diskdrake/interactive.pm:246 help.pm:544
#, c-format
msgid "Undo"
msgstr "ยกเลิก"

#: diskdrake/interactive.pm:246
#, c-format
msgid "Toggle to normal mode"
msgstr "สำหรับผู้ชำนาญ > ปกติ"

#: diskdrake/interactive.pm:246
#, c-format
msgid "Toggle to expert mode"
msgstr "ปกติ > สำหรับผู้ชำนาญ"

#: diskdrake/interactive.pm:265
#, c-format
msgid "Continue anyway?"
msgstr "ทำงานต่อหรือไม่?"

#: diskdrake/interactive.pm:270
#, c-format
msgid "Quit without saving"
msgstr "ออกโดยไม่ต้องบันทึก"

#: diskdrake/interactive.pm:270
#, c-format
msgid "Quit without writing the partition table?"
msgstr "ออกโดยไม่ต้องเขียนตารางพาร์ติชั่น"

#: diskdrake/interactive.pm:275
#, fuzzy, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"

#: diskdrake/interactive.pm:282 install_steps_interactive.pm:301
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr "คุณต้องทำการรีบูตระบบให้เครื่องรับทราบการเปลี่ยนแปลงตารางพาร์ติชั่น"

#: diskdrake/interactive.pm:295 help.pm:544
#, c-format
msgid "Clear all"
msgstr "ล้างทั้งหมด"

#: diskdrake/interactive.pm:296 help.pm:544
#, c-format
msgid "Auto allocate"
msgstr "กำหนดแบบอัตโนมัติ"

#: diskdrake/interactive.pm:302
#, fuzzy, c-format
msgid "Hard drive information"
msgstr "การตรวจหาฮาร์ดไดรว์"

#: diskdrake/interactive.pm:334
#, c-format
msgid "All primary partitions are used"
msgstr "พาร์ติชั่นแบบ primary ถูกใช้ทั้งหมดแล้ว"

#: diskdrake/interactive.pm:335
#, c-format
msgid "I can't add any more partitions"
msgstr "โปรแกรมไม่สามารถเพิ่มพาร์ติชั่นได้อีก"

#: diskdrake/interactive.pm:336
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"หากต้องการเพิ่มพาร์ติชั่น โปรดลบพาร์ติชั่นทิ้งหนึ่งพาร์ติชั่นเพื่อสร้าง\n"
"พาร์ติชั่นแบบ extended ได้"

#: diskdrake/interactive.pm:347 help.pm:544
#, fuzzy, c-format
msgid "Save partition table"
msgstr "บันทึกตารางพาร์ติชั่น"

#: diskdrake/interactive.pm:348 help.pm:544
#, fuzzy, c-format
msgid "Restore partition table"
msgstr "กู้ตารางพาร์ติชั่น"

#: diskdrake/interactive.pm:349 help.pm:544
#, c-format
msgid "Rescue partition table"
msgstr "กู้ตารางพาร์ติชั่น"

#: diskdrake/interactive.pm:351 help.pm:544
#, fuzzy, c-format
msgid "Reload partition table"
msgstr "กู้ตารางพาร์ติชั่น"

#: diskdrake/interactive.pm:353
#, c-format
msgid "Removable media automounting"
msgstr ""

#: diskdrake/interactive.pm:362 diskdrake/interactive.pm:382
#, c-format
msgid "Select file"
msgstr "เลือกไฟล์"

#: diskdrake/interactive.pm:369
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"พาร์ติชั่นแบ็คอัพไม่มีขนาดเท่ากัน\n"
"ต้องการทำต่อหรือไม่?"

#: diskdrake/interactive.pm:383 harddrake/sound.pm:226 keyboard.pm:340
#: network/netconnect.pm:450 network/netconnect.pm:469
#: printer/printerdrake.pm:936 printer/printerdrake.pm:1891
#: printer/printerdrake.pm:1953 printer/printerdrake.pm:1987
#: printer/printerdrake.pm:2291 printer/printerdrake.pm:3149
#: printer/printerdrake.pm:3426 printer/printerdrake.pm:3545
#: printer/printerdrake.pm:4543 standalone/drakTermServ:340
#: standalone/drakTermServ:1072 standalone/drakTermServ:1128
#: standalone/drakTermServ:1801 standalone/drakbackup:510
#: standalone/drakbackup:609 standalone/drakboot:156 standalone/drakclock:214
#: standalone/drakconnect:921 standalone/drakfloppy:296 standalone/drakups:27
#: standalone/scannerdrake:50 standalone/scannerdrake:913
#, c-format
msgid "Warning"
msgstr "คำเตือน"

#: diskdrake/interactive.pm:384
#, c-format
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"กรุณาใส่แผ่นฟล้อปปี้ในไดรว์\n"
"ข้อมูลทั้งหมดบนแผ่นฟล้อปปี้จะถูกลบ"

#: diskdrake/interactive.pm:395
#, c-format
msgid "Trying to rescue partition table"
msgstr "กำลังพยายามกู้ตารางพาร์ติชั่นคืน"

#: diskdrake/interactive.pm:401
#, fuzzy, c-format
msgid "Detailed information"
msgstr "แสดงข้อมูล"

#: diskdrake/interactive.pm:416 diskdrake/interactive.pm:711
#, c-format
msgid "Resize"
msgstr "เปลี่ยนขนาด"

#: diskdrake/interactive.pm:417 diskdrake/interactive.pm:779
#, c-format
msgid "Move"
msgstr "ย้าย"

#: diskdrake/interactive.pm:418
#, c-format
msgid "Format"
msgstr "ฟอร์แมต"

#: diskdrake/interactive.pm:420
#, c-format
msgid "Add to RAID"
msgstr "เพิ่มให้ RAID"

#: diskdrake/interactive.pm:421
#, c-format
msgid "Add to LVM"
msgstr "เพิ่มให้ LVM"

#: diskdrake/interactive.pm:424
#, c-format
msgid "Remove from RAID"
msgstr "ลบออกจาก RAID"

#: diskdrake/interactive.pm:425
#, c-format
msgid "Remove from LVM"
msgstr "ลบออกจาก LVM"

#: diskdrake/interactive.pm:426
#, c-format
msgid "Modify RAID"
msgstr "แก้ไข RAID"

#: diskdrake/interactive.pm:427
#, c-format
msgid "Use for loopback"
msgstr "ใช้สำหรับ loopback"

#: diskdrake/interactive.pm:467
#, c-format
msgid "Create a new partition"
msgstr "สร้างพาร์ติชั่นใหม่"

#: diskdrake/interactive.pm:470
#, c-format
msgid "Start sector: "
msgstr "เริ่มเซ็กเตอร์: "

#: diskdrake/interactive.pm:472 diskdrake/interactive.pm:881
#, c-format
msgid "Size in MB: "
msgstr "ขนาดเป็น MB: "

#: diskdrake/interactive.pm:473 diskdrake/interactive.pm:882
#, c-format
msgid "Filesystem type: "
msgstr "ประเภทของระบบไฟล์: "

#: diskdrake/interactive.pm:478
#, c-format
msgid "Preference: "
msgstr "ข้อกำหนด: "

#: diskdrake/interactive.pm:481
#, fuzzy, c-format
msgid "Logical volume name "
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: diskdrake/interactive.pm:510
#, c-format
msgid ""
"You can't create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""

#: diskdrake/interactive.pm:540
#, fuzzy, c-format
msgid "Remove the loopback file?"
msgstr "ฟอร์แมต loopback file %s"

#: diskdrake/interactive.pm:559
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr "การเปลี่ยนชนิดพาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะถูกลบทิ้ง"

#: diskdrake/interactive.pm:570
#, c-format
msgid "Change partition type"
msgstr "เปลี่ยนประเภทพาร์ติชั่น"

#: diskdrake/interactive.pm:571 diskdrake/removable.pm:48
#, c-format
msgid "Which filesystem do you want?"
msgstr "คุณต้องการเลือก filesystem ใด"

#: diskdrake/interactive.pm:579
#, c-format
msgid "Switching from ext2 to ext3"
msgstr ""

#: diskdrake/interactive.pm:608
#, fuzzy, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "คุณต้องการเม้าท์ loopback file %s ไว้ที่ใด?"

#: diskdrake/interactive.pm:609
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "คุณต้องการเม้าท์อุปกรณ์ %s ไว้ที่ใด?"

#: diskdrake/interactive.pm:614
#, c-format
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"

#: diskdrake/interactive.pm:639
#, fuzzy, c-format
msgid "Where do you want to mount %s?"
msgstr "คุณต้องการเม้าท์อุปกรณ์ %s ไว้ที่ใด?"

#: diskdrake/interactive.pm:663 diskdrake/interactive.pm:743
#: install_interactive.pm:156 install_interactive.pm:186
#, c-format
msgid "Resizing"
msgstr "ปรับขนาด"

#: diskdrake/interactive.pm:663
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "คำนวณขอบเขตของระบบไฟล์"

#: diskdrake/interactive.pm:699
#, c-format
msgid "This partition is not resizeable"
msgstr "พาร์ติชั่นนี้ไม่สามารถเปลี่ยนขนาดได้"

#: diskdrake/interactive.pm:704
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "ข้อมูลทั้งหมดในพาร์ติชั่นนี้ควรจะทำการสำรองไว้"

#: diskdrake/interactive.pm:706
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "หลังจากเปลี่ยนขนาดพาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะหายไป"

#: diskdrake/interactive.pm:711
#, c-format
msgid "Choose the new size"
msgstr "เลือกขนาดใหม่"

#: diskdrake/interactive.pm:712
#, fuzzy, c-format
msgid "New size in MB: "
msgstr "ขนาดเป็น MB: "

#: diskdrake/interactive.pm:756 install_interactive.pm:194
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""

#: diskdrake/interactive.pm:780
#, c-format
msgid "Which disk do you want to move it to?"
msgstr "คุณต้องการจะย้ายไปดิสก์ไหน"

#: diskdrake/interactive.pm:781
#, c-format
msgid "Sector"
msgstr "เซ็กเตอร์"

#: diskdrake/interactive.pm:782
#, c-format
msgid "Which sector do you want to move it to?"
msgstr "คุณต้องการย้ายไปเซ็กเตอร์ไหน"

#: diskdrake/interactive.pm:785
#, c-format
msgid "Moving"
msgstr "ย้าย"

#: diskdrake/interactive.pm:785
#, c-format
msgid "Moving partition..."
msgstr "ย้ายพาร์ติชั่น..."

#: diskdrake/interactive.pm:807
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "เลือก RAID เพื่อเพิ่มเข้าไป"

#: diskdrake/interactive.pm:808 diskdrake/interactive.pm:825
#, c-format
msgid "new"
msgstr "ใหม่"

#: diskdrake/interactive.pm:823
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "เลือก LVM ที่มีอยู่เพื่อเพิ่มเข้าไป"

#: diskdrake/interactive.pm:829
#, c-format
msgid "LVM name?"
msgstr "ชื่อ LVM"

#: diskdrake/interactive.pm:866
#, c-format
msgid "This partition can't be used for loopback"
msgstr "พาร์ติชั่นนี้ไม่สามารถใช้กับ loopback"

#: diskdrake/interactive.pm:879
#, c-format
msgid "Loopback"
msgstr "Loopback"

#: diskdrake/interactive.pm:880
#, c-format
msgid "Loopback file name: "
msgstr "ชื่อ Loopback file: "

#: diskdrake/interactive.pm:885
#, fuzzy, c-format
msgid "Give a file name"
msgstr "ชื่อเต็ม"

#: diskdrake/interactive.pm:888
#, fuzzy, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "File already used by another loopback, choose another one"

#: diskdrake/interactive.pm:889
#, c-format
msgid "File already exists. Use it?"
msgstr "ไฟล์มีอยู่แล้ว ต้องการใช้?"

#: diskdrake/interactive.pm:912
#, fuzzy, c-format
msgid "Mount options"
msgstr "อ๊อปชั่นของโมดูล:"

#: diskdrake/interactive.pm:919
#, c-format
msgid "Various"
msgstr ""

#: diskdrake/interactive.pm:983
#, c-format
msgid "device"
msgstr "อุปกรณ์"

#: diskdrake/interactive.pm:984
#, c-format
msgid "level"
msgstr "ระดับ"

#: diskdrake/interactive.pm:985
#, c-format
msgid "chunk size"
msgstr "ขนาดของ chunk"

#: diskdrake/interactive.pm:1001
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "ระวัง การทำงานนี้อันตราย"

#: diskdrake/interactive.pm:1016
#, c-format
msgid "What type of partitioning?"
msgstr "การทำ partitioning ชนิดใด?"

#: diskdrake/interactive.pm:1032
#, fuzzy, c-format
msgid "The package %s is needed. Install it?"
msgstr ""
"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
"คุณแน่ใจว่าจะไม่เลือกมันหรือ"

#: diskdrake/interactive.pm:1061
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "คุณจะต้องทำการรีบูตระบบก่อนที่จะทำการแก้ไข"

#: diskdrake/interactive.pm:1070
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "ตารางพาร์ติชั่นของไดรฟ์ %s จะถูกบันทึกลงไปในดิสก์"

#: diskdrake/interactive.pm:1083
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "หลังจาก format พาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะถูกลบทิ้ง"

#: diskdrake/interactive.pm:1100
#, fuzzy, c-format
msgid "Move files to the new partition"
msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"

#: diskdrake/interactive.pm:1100
#, fuzzy, c-format
msgid "Hide files"
msgstr "mkraid failed"

#: diskdrake/interactive.pm:1101
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""

#: diskdrake/interactive.pm:1112
#, fuzzy, c-format
msgid "Moving files to the new partition"
msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"

#: diskdrake/interactive.pm:1116
#, c-format
msgid "Copying %s"
msgstr ""

#: diskdrake/interactive.pm:1120
#, fuzzy, c-format
msgid "Removing %s"
msgstr "ความละเอียดของภาพ %s\n"

#: diskdrake/interactive.pm:1134
#, c-format
msgid "partition %s is now known as %s"
msgstr ""

#: diskdrake/interactive.pm:1155 diskdrake/interactive.pm:1217
#, c-format
msgid "Device: "
msgstr "อุปกรณ์: "

#: diskdrake/interactive.pm:1156
#, fuzzy, c-format
msgid "Devfs name: "
msgstr "ชื่อโฮสต์:"

#: diskdrake/interactive.pm:1157
#, c-format
msgid "Volume label: "
msgstr ""

#: diskdrake/interactive.pm:1158
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "อักษรไดรว์แบบดอส: %s (เป็นการคาดเดา)\n"

#: diskdrake/interactive.pm:1162 diskdrake/interactive.pm:1170
#: diskdrake/interactive.pm:1236
#, c-format
msgid "Type: "
msgstr "ประเภท: "

#: diskdrake/interactive.pm:1166 install_steps_gtk.pm:341
#, c-format
msgid "Name: "
msgstr "ชื่อ: "

#: diskdrake/interactive.pm:1174
#, c-format
msgid "Start: sector %s\n"
msgstr "เริ่มต้น: เซ็กเตอร์ %s\n"

#: diskdrake/interactive.pm:1175
#, c-format
msgid "Size: %s"
msgstr "ขนาด: %s"

#: diskdrake/interactive.pm:1177
#, c-format
msgid ", %s sectors"
msgstr ", %s เซ็กเตอร์"

#: diskdrake/interactive.pm:1179
#, fuzzy, c-format
msgid "Cylinder %d to %d\n"
msgstr "ไซลินเดอร์ %d เป็น ไซลินเดอร์ %d\n"

#: diskdrake/interactive.pm:1180
#, c-format
msgid "Number of logical extents: %d"
msgstr ""

#: diskdrake/interactive.pm:1181
#, c-format
msgid "Formatted\n"
msgstr "ฟอร์แมต\n"

#: diskdrake/interactive.pm:1182
#, c-format
msgid "Not formatted\n"
msgstr "ยังไม่ได้ฟอร์แมต\n"

#: diskdrake/interactive.pm:1183
#, c-format
msgid "Mounted\n"
msgstr "เม้าท์\n"

#: diskdrake/interactive.pm:1184
#, c-format
msgid "RAID md%s\n"
msgstr "RAID md%s\n"

#: diskdrake/interactive.pm:1186
#, fuzzy, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr "Loopback file(s): %s\n"

#: diskdrake/interactive.pm:1187
#, c-format
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"พาร์ติชั่นที่กำหนดให้บูตซึ่งกำหนดไว้แล้ว\n"
"    (สำหรับบูตของ MS-DOS ไม่ใช่ lilo)\n"

#: diskdrake/interactive.pm:1189
#, c-format
msgid "Level %s\n"
msgstr "ระดับ %s\n"

#: diskdrake/interactive.pm:1190
#, c-format
msgid "Chunk size %s\n"
msgstr "ขนาดของ Chunk %s\n"

#: diskdrake/interactive.pm:1191
#, c-format
msgid "RAID-disks %s\n"
msgstr "ดิสก์แบบ RAID %s\n"

#: diskdrake/interactive.pm:1193
#, c-format
msgid "Loopback file name: %s"
msgstr "Loopback file name: %s"

#: diskdrake/interactive.pm:1196
#, fuzzy, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"มีความเป็นไปได้ที่พาร์ติชั่นนี้\n"
"เป็นพาร์ติชั่นของไดรเวอร์ คุณควรที่จะ\n"
"ปล่อยมันทิ้งไว้แบบนี้\n"

#: diskdrake/interactive.pm:1199
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"

#: diskdrake/interactive.pm:1218
#, c-format
msgid "Read-only"
msgstr ""

#: diskdrake/interactive.pm:1219
#, c-format
msgid "Size: %s\n"
msgstr "ขนาด: %s\n"

#: diskdrake/interactive.pm:1220
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "ข้อมูลทางกายภาพ: %s ไซลินเดอร์, %s หัวอ่าน, %s เซ้กเตอร์\n"

#: diskdrake/interactive.pm:1221
#, c-format
msgid "Info: "
msgstr "ข้อมูล: "

#: diskdrake/interactive.pm:1222
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-disks %s\n"

#: diskdrake/interactive.pm:1223
#, c-format
msgid "Partition table type: %s\n"
msgstr "ชนิดตารางพาร์ติชั่น: %s\n"

#: diskdrake/interactive.pm:1224
#, fuzzy, c-format
msgid "on channel %d id %d\n"
msgstr "บนบัส %d id %d\n"

#: diskdrake/interactive.pm:1257
#, fuzzy, c-format
msgid "Filesystem encryption key"
msgstr "ประเภทของระบบไฟล์: "

#: diskdrake/interactive.pm:1258
#, c-format
msgid "Choose your filesystem encryption key"
msgstr ""

#: diskdrake/interactive.pm:1261
#, fuzzy, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr "รหัสลับง่ายเกินไป (ต้องมีอย่างน้อย %d ตัวอักษร)"

#: diskdrake/interactive.pm:1262
#, fuzzy, c-format
msgid "The encryption keys do not match"
msgstr "รหัสผ่านไม่เหมือนกัน"

#: diskdrake/interactive.pm:1265 network/netconnect.pm:979
#: standalone/drakconnect:404
#, c-format
msgid "Encryption key"
msgstr ""

#: diskdrake/interactive.pm:1266
#, c-format
msgid "Encryption key (again)"
msgstr ""

#: diskdrake/removable.pm:47
#, fuzzy, c-format
msgid "Change type"
msgstr "เปลี่ยนประเภทพาร์ติชั่น"

#: diskdrake/smbnfs_gtk.pm:163
#, c-format
msgid "Can't login using username %s (bad password?)"
msgstr ""

#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
#, fuzzy, c-format
msgid "Domain Authentication Required"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#: diskdrake/smbnfs_gtk.pm:168
#, fuzzy, c-format
msgid "Which username"
msgstr "ชื่อผู้ใช้"

#: diskdrake/smbnfs_gtk.pm:168
#, fuzzy, c-format
msgid "Another one"
msgstr "เฎ?เฏ?เฎฃเฎฏเฎฎเฎ?"

#: diskdrake/smbnfs_gtk.pm:177
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""

#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3495
#, fuzzy, c-format
msgid "Username"
msgstr "ชื่อผู้ใช้"

#: diskdrake/smbnfs_gtk.pm:205
#, fuzzy, c-format
msgid "Search servers"
msgstr "เซิร์ฟเวอร์ DNS"

#: diskdrake/smbnfs_gtk.pm:210
#, fuzzy, c-format
msgid "Search new servers"
msgstr "เซิร์ฟเวอร์ DNS"

#: do_pkgs.pm:21
#, fuzzy, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr ""
"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
"คุณแน่ใจว่าจะไม่เลือกมันหรือ"

#: do_pkgs.pm:26
#, c-format
msgid "Mandatory package %s is missing"
msgstr ""

#: do_pkgs.pm:143
#, fuzzy, c-format
msgid "Installing packages..."
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: do_pkgs.pm:217
#, fuzzy, c-format
msgid "Removing packages..."
msgstr "ความละเอียดของภาพ %s\n"

#: fs.pm:416
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""

#: fs.pm:419
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""

#: fs.pm:422
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr ""

#: fs.pm:424
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""

#: fs.pm:428
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""

#: fs.pm:432
#, c-format
msgid "Mount the file system read-only."
msgstr ""

#: fs.pm:434
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr ""

#: fs.pm:438
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the "
"file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""

#: fs.pm:446
#, c-format
msgid "Give write access to ordinary users"
msgstr ""

#: fs.pm:448
#, c-format
msgid "Give read-only access to ordinary users"
msgstr ""

#: fs.pm:588 fs.pm:598 fs.pm:602 fs.pm:606 fs.pm:610 fs.pm:614 swap.pm:12
#, c-format
msgid "%s formatting of %s failed"
msgstr "กำลังฟอร์แมต %s ของ %s ที่มีปัญหา"

#: fs.pm:655
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr "ไม่ทราบว่าจะฟอร์แมต %s เป็นชนิด %s ได้อย่างไร"

#: fs.pm:662 fs.pm:669
#, c-format
msgid "Formatting partition %s"
msgstr "ฟอร์แมตพาร์ติชั่น %s"

#: fs.pm:666
#, c-format
msgid "Creating and formatting file %s"
msgstr "กำลังสร้างและ format ไฟล์ %s"

#: fs.pm:726 fs.pm:775
#, fuzzy, c-format
msgid "Mounting partition %s"
msgstr "ฟอร์แมตพาร์ติชั่น %s"

#: fs.pm:727 fs.pm:776
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr ""

#: fs.pm:747 fs.pm:754
#, fuzzy, c-format
msgid "Checking %s"
msgstr "ความละเอียดของภาพ %s\n"

#: fs.pm:792 partition_table.pm:639
#, c-format
msgid "error unmounting %s: %s"
msgstr "ผิดพลาดยกเลิกการเม้าท์ %s: %s"

#: fs.pm:824
#, fuzzy, c-format
msgid "Enabling swap partition %s"
msgstr "ฟอร์แมตพาร์ติชั่น %s"

#: fsedit.pm:21
#, c-format
msgid "simple"
msgstr "ง่าย"

#: fsedit.pm:25
#, c-format
msgid "with /usr"
msgstr ""

#: fsedit.pm:30
#, c-format
msgid "server"
msgstr "เซิร์ฟเวอร์"

#: fsedit.pm:263
#, fuzzy, c-format
msgid ""
"I can't read the partition table of device %s, it's too corrupted for me :(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
"ผมไม่สามารถอ่านตารางพาร์ติชั่นได้ มันเสียหายมากเกินไป \n"
"ผมสามารถพยายามลบข้อมูลข้อมูลในพาร์ติชั่นที่เสียหาย\n"
"อีกทางเลือกคือไม่ให้ DrakX ทำการเปลี่ยนแปลงตาราง\n"
"ข้อความผิดพลาดคือ %s\n"
"\n"
"คุณแน่ใจว่าจะยอมให้พาร์ติชั่นทั้งหมดถูกลบไป\n"

#: fsedit.pm:524
#, c-format
msgid "You can't use JFS for partitions smaller than 16MB"
msgstr "คุณไม่สามารถใช้ JFS สำหรับพาร์ติชั่นที่น้อยกว่า 16MB ได้"

#: fsedit.pm:525
#, c-format
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr "คุณไม่สามารถใช้ ReiserFS สำหรับพาร์ติชั่นที่น้อยกว่า 32MB ได้"

#: fsedit.pm:544
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "จุดเม้าท์จะต้องเริ่มด้วย /"

#: fsedit.pm:545
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr ""

#: fsedit.pm:546
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "มีพาร์ติชั่นที่เป็นจุดเม้าท์ที่ %s เรียบร้อยแล้ว\n"

#: fsedit.pm:548
#, fuzzy, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"คุณได้เลือก Software RAID พาร์ติชั่น เป็น root (/) \n"
"bootloader ไม่สามารถทำงานโดยไม่มี /boot พาร์ติชั่น \n"
"เพราะฉนั้นจำเป็นต้องเพิ่ม /boot พาร์ติชั่น"

#: fsedit.pm:551
#, c-format
msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr "คุณไม่สามารถใช้ LVM Logical Volume สำหรับ %s"

#: fsedit.pm:553
#, fuzzy, c-format
msgid ""
"You've selected a LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"คุณได้เลือก Software RAID พาร์ติชั่น เป็น root (/) \n"
"bootloader ไม่สามารถทำงานโดยไม่มี /boot พาร์ติชั่น \n"
"เพราะฉนั้นจำเป็นต้องเพิ่ม /boot พาร์ติชั่น"

#: fsedit.pm:556
#, c-format
msgid ""
"You may not be able to install lilo (since lilo doesn't handle a LV on "
"multiple PVs)"
msgstr ""

#: fsedit.pm:559 fsedit.pm:561
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "This directory should remain within the root filesystem"

#: fsedit.pm:563 fsedit.pm:565
#, fuzzy, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr "You need a true filesystem (ext2, reiserfs) for this mount point\n"

#: fsedit.pm:567
#, fuzzy, c-format
msgid "You can't use an encrypted file system for mount point %s"
msgstr "คุณไม่สามารถใช้ LVM Logical Volume สำหรับ %s"

#: fsedit.pm:628
#, fuzzy, c-format
msgid "Not enough free space for auto-allocating"
msgstr "ไม่มีพื้นที่เพียงพอสำหรับการแบ่งสัดส่วนพาร์ติชั่นแบบออโต้"

#: fsedit.pm:630
#, c-format
msgid "Nothing to do"
msgstr ""

#: fsedit.pm:726
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "เกิดข้อผิดพลาดในการเปิด %s สำหรับการเขียน: %s"

#: harddrake/data.pm:55
#, fuzzy, c-format
msgid "Floppy"
msgstr "บันทึกลงแผ่นฟล้อปปี้"

#: harddrake/data.pm:65
#, c-format
msgid "Zip"
msgstr "ซิปไดร์ฟ"

#: harddrake/data.pm:75
#, fuzzy, c-format
msgid "Disk"
msgstr "เดนมาร์ก"

#: harddrake/data.pm:84
#, c-format
msgid "CDROM"
msgstr ""

#: harddrake/data.pm:94
#, c-format
msgid "CD/DVD burners"
msgstr ""

#: harddrake/data.pm:104
#, fuzzy, c-format
msgid "DVD-ROM"
msgstr "ซีดี-รอม"

#: harddrake/data.pm:114 standalone/drakbackup:2025
#, fuzzy, c-format
msgid "Tape"
msgstr "ประเภท"

#: harddrake/data.pm:123
#, fuzzy, c-format
msgid "Videocard"
msgstr "โหมดของการแสดงผล"

#: harddrake/data.pm:133
#, fuzzy, c-format
msgid "Tvcard"
msgstr "TV card"

#: harddrake/data.pm:142
#, fuzzy, c-format
msgid "Other MultiMedia devices"
msgstr "อื่นๆ"

#: harddrake/data.pm:151
#, fuzzy, c-format
msgid "Soundcard"
msgstr "Sound card"

#: harddrake/data.pm:160
#, c-format
msgid "Webcam"
msgstr ""

#: harddrake/data.pm:174
#, c-format
msgid "Processors"
msgstr ""

#: harddrake/data.pm:183
#, fuzzy, c-format
msgid "ISDN adapters"
msgstr "Internal ISDN card"

#: harddrake/data.pm:192
#, fuzzy, c-format
msgid "Ethernetcard"
msgstr "Ethernet Card"

#: harddrake/data.pm:208 network/netconnect.pm:464
#, fuzzy, c-format
msgid "Modem"
msgstr "Mouse"

#: harddrake/data.pm:217
#, c-format
msgid "ADSL adapters"
msgstr ""

#: harddrake/data.pm:230
#, c-format
msgid "AGP controllers"
msgstr ""

#: harddrake/data.pm:239
#, c-format
msgid "Bridges and system controllers"
msgstr ""

#: harddrake/data.pm:248 help.pm:203 help.pm:991
#: install_steps_interactive.pm:927 printer/printerdrake.pm:687
#: printer/printerdrake.pm:4175
#, c-format
msgid "Printer"
msgstr "เครื่องพิมพ์"

#: harddrake/data.pm:257 help.pm:991 install_steps_interactive.pm:920
#, c-format
msgid "Mouse"
msgstr "Mouse"

#: harddrake/data.pm:271
#, c-format
msgid "Joystick"
msgstr ""

#: harddrake/data.pm:281
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr ""

#: harddrake/data.pm:290
#, c-format
msgid "SATA controllers"
msgstr ""

#: harddrake/data.pm:299
#, c-format
msgid "Firewire controllers"
msgstr ""

#: harddrake/data.pm:308
#, c-format
msgid "SCSI controllers"
msgstr ""

#: harddrake/data.pm:317
#, c-format
msgid "USB controllers"
msgstr ""

#: harddrake/data.pm:326
#, fuzzy, c-format
msgid "USB ports"
msgstr "ไม่มีเครื่องพิมพ์"

#: harddrake/data.pm:335
#, c-format
msgid "SMBus controllers"
msgstr ""

#: harddrake/data.pm:344
#, fuzzy, c-format
msgid "Scanner"
msgstr "เลือกกราฟฟิคการ์ด"

#: harddrake/data.pm:354 standalone/harddrake2:336
#, fuzzy, c-format
msgid "Unknown/Others"
msgstr "Generic"

#: harddrake/data.pm:374
#, c-format
msgid "cpu # "
msgstr ""

#: harddrake/sound.pm:150 standalone/drakconnect:169
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "กรุณารอสักครู่ ..."

#: harddrake/sound.pm:186
#, c-format
msgid "No alternative driver"
msgstr ""

#: harddrake/sound.pm:187
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""

#: harddrake/sound.pm:193
#, fuzzy, c-format
msgid "Sound configuration"
msgstr "การปรับแต่ง LAN"

#: harddrake/sound.pm:195
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""

#: harddrake/sound.pm:197
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""

#: harddrake/sound.pm:199
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""

#: harddrake/sound.pm:213 harddrake/sound.pm:293 standalone/drakups:134
#, fuzzy, c-format
msgid "Driver:"
msgstr "Driver"

#: harddrake/sound.pm:218
#, c-format
msgid "Trouble shooting"
msgstr ""

#: harddrake/sound.pm:226
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""

#: harddrake/sound.pm:234
#, c-format
msgid "No open source driver"
msgstr ""

#: harddrake/sound.pm:235
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""

#: harddrake/sound.pm:238
#, c-format
msgid "No known driver"
msgstr ""

#: harddrake/sound.pm:239
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr ""

#: harddrake/sound.pm:243
#, c-format
msgid "Unknown driver"
msgstr ""

#: harddrake/sound.pm:244
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr ""

#: harddrake/sound.pm:257
#, c-format
msgid "Sound trouble shooting"
msgstr ""

#: harddrake/sound.pm:258
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""

#: harddrake/sound.pm:284
#, c-format
msgid "Let me pick any driver"
msgstr ""

#: harddrake/sound.pm:287
#, c-format
msgid "Choosing an arbitrary driver"
msgstr ""

#: harddrake/sound.pm:288
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""

#: harddrake/v4l.pm:14
#, fuzzy, c-format
msgid "Auto-detect"
msgstr "ใช้ auto detection"

#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
#, fuzzy, c-format
msgid "Unknown|Generic"
msgstr "Generic"

#: harddrake/v4l.pm:105
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr ""

#: harddrake/v4l.pm:106
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr ""

#: harddrake/v4l.pm:309
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""

#: harddrake/v4l.pm:312
#, fuzzy, c-format
msgid "Card model:"
msgstr "Card mem (DMA)"

#: harddrake/v4l.pm:313
#, fuzzy, c-format
msgid "Tuner type:"
msgstr "เปลี่ยนประเภทพาร์ติชั่น"

#: harddrake/v4l.pm:314
#, c-format
msgid "Number of capture buffers:"
msgstr ""

#: harddrake/v4l.pm:314
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr ""

#: harddrake/v4l.pm:316
#, fuzzy, c-format
msgid "PLL setting:"
msgstr "ฟอร์แมต"

#: harddrake/v4l.pm:317
#, c-format
msgid "Radio support:"
msgstr ""

#: harddrake/v4l.pm:317
#, c-format
msgid "enable radio support"
msgstr ""

#: help.pm:11
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandrakelinux distribution. If you do agree with all the\n"
"terms in it, check the \"%s\" box. If not, clicking on the \"%s\" button\n"
"will reboot your computer."
msgstr ""

#: help.pm:14 install_steps_gtk.pm:598 install_steps_interactive.pm:88
#: install_steps_interactive.pm:690 standalone/drakautoinst:216
#, c-format
msgid "Accept"
msgstr "ยอมรับ"

#: help.pm:17
#, c-format
msgid ""
"GNU/Linux is a multi-user system, meaning each user may have their own\n"
"preferences, their own files and so on. You can read the ``Starter Guide''\n"
"to learn more about multi-user systems. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be\n"
"authorized to change anything except their own files and their own\n"
"configurations, protecting the system from unintentional or malicious\n"
"changes that impact on the system as a whole. You will have to create at\n"
"least one regular user for yourself -- this is the account which you should\n"
"use for routine, day-to-day use. Although it is very easy to log in as\n"
"\"root\" to do anything and everything, it may also be very dangerous! A\n"
"very simple mistake could mean that your system will not work any more. If\n"
"you make a serious mistake as a regular user, the worst that will happen is\n"
"that you will lose some information, but not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you typed in this field and copy it to the \"%s\" field, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that is no reason to neglect\n"
"it by making it blank or too simple: after all, your files could be the\n"
"ones at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends: your father or your sister, for example. Click \"%s\" when\n"
"you have finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you have finished adding users, you will be asked to choose a user who\n"
"can automatically log into the system when the computer boots up. If you\n"
"are interested in that feature (and do not care much about local security),\n"
"choose the desired user and window manager, then click \"%s\". If you are\n"
"not interested in this feature, uncheck the \"%s\" box."
msgstr ""

#: help.pm:52 help.pm:197 help.pm:444 help.pm:691 help.pm:784 help.pm:1005
#: install_steps_gtk.pm:277 interactive.pm:403 interactive/newt.pm:308
#: network/netconnect.pm:271 network/tools.pm:166 printer/printerdrake.pm:3090
#: standalone/drakTermServ:397 standalone/drakbackup:3920
#: standalone/drakbackup:4014 standalone/drakbackup:4031
#: standalone/drakbackup:4049 ugtk2.pm:510
#, c-format
msgid "Next"
msgstr "Next"

#: help.pm:52 help.pm:418 help.pm:444 help.pm:660 help.pm:733 help.pm:768
#: interactive.pm:371
#, c-format
msgid "Advanced"
msgstr "Advanced"

#: help.pm:55
#, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""

#: help.pm:86
#, c-format
msgid ""
"The Mandrakelinux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the correct CD as required."
msgstr ""

#: help.pm:91
#, c-format
msgid ""
"It is now time to specify which programs you wish to install on your\n"
"system. There are thousands of packages available for Mandrakelinux, and\n"
"to make it simpler to manage the packages have been placed into groups of\n"
"similar applications.\n"
"\n"
"Packages are sorted into groups corresponding to a particular use of your\n"
"machine. Mandrakelinux sorts packages groups in four categories. You can\n"
"mix and match applications from the various categories, so a\n"
"``Workstation'' installation can still have applications from the\n"
"``Development'' category installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups that are in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group. If you unselect all groups when performing a regular\n"
"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
"different options for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command line interface. The total size of this installation is about 65\n"
"megabytes.\n"
"\n"
"You can check the \"%s\" box, which is useful if you are familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you started the installation in \"%s\" mode, you can unselect all groups\n"
"to avoid installing any new package. This is useful for repairing or\n"
"updating an existing system."
msgstr ""

#: help.pm:137
#, fuzzy, c-format
msgid "Workstation"
msgstr "Workstation ที่ทำงาน"

#: help.pm:137
#, c-format
msgid "Development"
msgstr "พัฒนาซอฟท์แวร์ (Development)"

#: help.pm:137
#, c-format
msgid "Graphical Environment"
msgstr "การทำงานแบบกราฟฟิก"

#: help.pm:137 install_steps_interactive.pm:552
#, c-format
msgid "With X"
msgstr ""

#: help.pm:137
#, fuzzy, c-format
msgid "With basic documentation"
msgstr "ตำแหน่ง"

#: help.pm:137
#, fuzzy, c-format
msgid "Truly minimal install"
msgstr "ออกจากการติดตั้ง"

#: help.pm:137 install_steps_gtk.pm:272 install_steps_interactive.pm:598
#, c-format
msgid "Individual package selection"
msgstr "Individual package selection"

#: help.pm:137 help.pm:602
#, fuzzy, c-format
msgid "Upgrade"
msgstr "Update"

#: help.pm:140
#, c-format
msgid ""
"If you told the installer that you wanted to individually select packages,\n"
"it will present a tree containing all packages classified by groups and\n"
"subgroups. While browsing the tree, you can select entire groups,\n"
"subgroups, or individual packages.\n"
"\n"
"Whenever you select a package on the tree, a description appears on the\n"
"right to let you know the purpose of the package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you will be asked to confirm that you really want those servers to be\n"
"installed. By default Mandrakelinux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that that\n"
"security holes were discovered after this version of Mandrakelinux was\n"
"finalized. If you do not know what a particular service is supposed to do\n"
"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
"install the listed services and they will be started automatically by\n"
"default during boot. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages have relationships between each them such\n"
"that installation of one package requires that some other program is also\n"
"required to be installed. The installer can determine which packages are\n"
"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert a floppy disk previously created at the\n"
"end of another installation. See the second tip of last step on how to\n"
"create such a floppy."
msgstr ""

#: help.pm:172 help.pm:301 help.pm:329 help.pm:457 install_any.pm:411
#: interactive.pm:149 modules/interactive.pm:71 standalone/harddrake2:225
#: ugtk2.pm:1083 wizards.pm:156
#, c-format
msgid "No"
msgstr "ไม่ต้อง"

#: help.pm:172 help.pm:301 help.pm:457 install_any.pm:411 interactive.pm:149
#: modules/interactive.pm:71 printer/printerdrake.pm:607 standalone/drakgw:288
#: standalone/drakgw:289 standalone/drakgw:297 standalone/drakgw:307
#: standalone/harddrake2:224 ugtk2.pm:1083 wizards.pm:156
#, c-format
msgid "Yes"
msgstr "ใช่"

#: help.pm:172
#, c-format
msgid "Automatic dependencies"
msgstr ""

#: help.pm:175
#, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
"connect your computer to the Internet or to a local network, click \"%s\".\n"
"Mandrakelinux will attempt to auto-detect network devices and modems. If\n"
"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
"configure the network, or to do it later, in which case clicking the \"%s\"\n"
"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"Normal modem connection, Winmodem connection, ISDN modem, ADSL connection,\n"
"cable modem, and finally a simple LAN connection (Ethernet).\n"
"\n"
"We will not detail each configuration option - just make sure that you have\n"
"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
"from your Internet Service Provider or system administrator.\n"
"\n"
"About Winmodem Connection. Winmodems are special integrated low-end modems\n"
"that require additional software to work compared to Normal modems. Some of\n"
"those modems actually work under Mandrakelinux, some others do not. You\n"
"can consult the list of supported modems at LinModems.\n"
"\n"
"You can consult the ``Starter Guide'' chapter about Internet connections\n"
"for details about the configuration, or simply wait until your system is\n"
"installed and use the program described there to configure your connection."
msgstr ""

#: help.pm:197
#, c-format
msgid "Use auto detection"
msgstr "ใช้ auto detection"

#: help.pm:200
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to setup a new printer. The interface presented there is\n"
"similar to the one used during installation."
msgstr ""

#: help.pm:203 help.pm:581 help.pm:991 install_steps_gtk.pm:648
#: standalone/drakbackup:2313 standalone/drakbackup:2321
#: standalone/drakbackup:2329 standalone/drakbackup:2337
#, c-format
msgid "Configure"
msgstr "การปรับแต่ง"

#: help.pm:206
#, c-format
msgid ""
"This dialog is used to choose which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all the services available on the current installation.\n"
"Review each one carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you are not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you will probably not want to start any services that you do not\n"
"need. Please remember that several services can be dangerous if they are\n"
"enabled on a server. In general, select only the services you really need.\n"
"!!"
msgstr ""

#: help.pm:224
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system like Windows.\n"
"\n"
"The \"%s\" option will automatically regulate the clock by connecting to a\n"
"remote time server on the Internet. For this feature to work, you must have\n"
"a working Internet connection. It is best to choose a time server located\n"
"near you. This option actually installs a time server that can be used by\n"
"other machines on your local network as well."
msgstr ""

#: help.pm:235 install_steps_interactive.pm:822
#, fuzzy, c-format
msgid "Hardware clock set to GMT"
msgstr "คุณต้องการให้เซ็ตนาฬิกาฮาร์ดแวร์เป็น GMT?"

#: help.pm:235
#, fuzzy, c-format
msgid "Automatic time synchronization"
msgstr "Boot Style Configuration"

#: help.pm:238
#, c-format
msgid ""
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If it is not the case, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you are asked to choose the server that\n"
"best suits your needs."
msgstr ""

#: help.pm:249
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandrakelinux rely upon.\n"
"\n"
"You will be presented with a list of different parameters to change to get\n"
"an optimal graphical display: Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If it is not the case, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you are asked to choose the server that\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"monitor connected to your machine. If it is incorrect, you can choose from\n"
"this list the monitor you actually have connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"hardware. Choose the one that best suits your needs (you will be able to\n"
"change that after installation though). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   Depending on your hardware, this entry might not appear.\n"
"\n"
"   the system will try to open a graphical screen at the desired\n"
"resolution. If you can see the message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you cannot see the message, it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds, bringing you back to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
"   Here you can choose whether you want to have your machine automatically\n"
"switch to a graphical interface at boot. Obviously, you want to check\n"
"\"%s\" if your machine is to act as a server, or if you were not successful\n"
"in getting the display configured."
msgstr ""

#: help.pm:304
#, c-format
msgid ""
"Monitor\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"monitor connected to your machine. If it is incorrect, you can choose from\n"
"this list the monitor you actually have connected to your computer."
msgstr ""

#: help.pm:311
#, c-format
msgid ""
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"hardware. Choose the one that best suits your needs (you will be able to\n"
"change that after installation though). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""

#: help.pm:319
#, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you are asked to choose the server that best\n"
"suits your needs."
msgstr ""

#: help.pm:324
#, c-format
msgid ""
"Options\n"
"\n"
"   Here you can choose whether you want to have your machine automatically\n"
"switch to a graphical interface at boot. Obviously, you want to check\n"
"\"%s\" if your machine is to act as a server, or if you were not successful\n"
"in getting the display configured."
msgstr ""

#: help.pm:332
#, c-format
msgid ""
"At this point, you need to decide where you want to install the Mandrake\n"
"Linux operating system on your hard drive. If your hard drive is empty or\n"
"if an existing operating system is using all the available space you will\n"
"have to partition the drive. Basically, partitioning a hard drive consists\n"
"of logically dividing it to create the space needed to install your new\n"
"Mandrakelinux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to lost data if there is an existing operating system already\n"
"installed on the drive, partitioning can be intimidating and stressful if\n"
"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
" * \"%s\": this option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you have previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended.. Using this option is\n"
"recommended if you want to use both Mandrakelinux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
" * \"%s\": if you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandrakelinux system,\n"
"choose this option. Be careful, because you will not be able to undo your\n"
"choice after you confirm.\n"
"\n"
"   !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\": choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""

#: help.pm:389 install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr "ใช้พื้นที่ที่ว่าง"

#: help.pm:389
#, fuzzy, c-format
msgid "Use existing partition"
msgstr "ใช้พาร์ติชั่นที่มีอยู่"

#: help.pm:389 install_interactive.pm:137
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "ใช้พื้นที่ที่ว่างใน Windows partition"

#: help.pm:389 install_interactive.pm:211
#, c-format
msgid "Erase entire disk"
msgstr "ลบ disk ทั้งหมด"

#: help.pm:389
#, fuzzy, c-format
msgid "Remove Windows"
msgstr "ลบ Windows(TM)"

#: help.pm:389 install_interactive.pm:226
#, c-format
msgid "Custom disk partitioning"
msgstr "กำลังพาร์ติชั่น Custom disk"

#: help.pm:392
#, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to use. Just click \"%s\" to reboot the system. Don't forget to\n"
"remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"bootloader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": to create an installation floppy disk that will automatically\n"
"perform a whole installation without the help of an operator, similar to\n"
"the installation you just configured.\n"
"\n"
"   Note that two different options are available after clicking the button:\n"
"\n"
"    * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
"    * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing a number of similar machines.\n"
"See the Auto install section on our web site for more information.\n"
"\n"
" * \"%s\": saves a list of the packages selected in this installation. To\n"
"use this selection with another installation, insert the floppy and start\n"
"the installation. At the prompt, press the [F1] key and type >>linux\n"
"defcfg=\"floppy\" <<."
msgstr ""

#: help.pm:418
#, fuzzy, c-format
msgid "Generate auto-install floppy"
msgstr "สร้างfloppyสำหรับการติดตั้งแบบออโตเมติก"

#: help.pm:418 install_steps_interactive.pm:1316
#, c-format
msgid "Replay"
msgstr "เรียกอีกครั้ง"

#: help.pm:418 install_steps_interactive.pm:1316
#, c-format
msgid "Automated"
msgstr "อัตโนมัติ"

#: help.pm:418 install_steps_interactive.pm:1319
#, c-format
msgid "Save packages selection"
msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"

#: help.pm:421
#, c-format
msgid ""
"Any partitions that have been newly defined must be formatted for use\n"
"(formatting means creating a file system).\n"
"\n"
"At this time, you may wish to reformat some already existing partitions to\n"
"erase any data they contain. If you wish to do that, please select those\n"
"partitions as well.\n"
"\n"
"Please note that it is not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
"reformat partitions containing data that you wish to keep (typically\n"
"\"/home\").\n"
"\n"
"Please be careful when selecting partitions. After formatting, all data on\n"
"the selected partitions will be deleted and you will not be able to recover\n"
"it.\n"
"\n"
"Click on \"%s\" when you are ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandrakelinux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions that will be checked for\n"
"bad blocks on the disk."
msgstr ""

#: help.pm:444 help.pm:1005 install_steps_gtk.pm:433 interactive.pm:404
#: interactive/newt.pm:307 printer/printerdrake.pm:3088
#: standalone/drakTermServ:376 standalone/drakbackup:3880
#: standalone/drakbackup:3919 standalone/drakbackup:4030
#: standalone/drakbackup:4045 ugtk2.pm:508
#, c-format
msgid "Previous"
msgstr "ก่อน"

#: help.pm:447
#, c-format
msgid ""
"At the time you are installing Mandrakelinux, it is likely that some\n"
"packages will have been updated since the initial release. Bugs may have\n"
"been fixed, security issues resolved. To allow you to benefit from these\n"
"updates, you are now able to download them from the Internet. Check \"%s\"\n"
"if you have a working Internet connection, or \"%s\" if you prefer to\n"
"install updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of places from which updates can be\n"
"retrieved. You should choose one near to you. A package-selection tree will\n"
"appear: review the selection, and press \"%s\" to retrieve and install the\n"
"selected package(s), or \"%s\" to abort."
msgstr ""

#: help.pm:457 help.pm:602 install_steps_gtk.pm:432
#: install_steps_interactive.pm:148 standalone/drakbackup:4077
#, c-format
msgid "Install"
msgstr "ติดตั้ง"

#: help.pm:460
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level desired\n"
"for the machine. As a rule of thumb, the security level should be set\n"
"higher if the machine will contain crucial data, or if it will be a machine\n"
"directly exposed to the Internet. The trade-off of a higher security level\n"
"is generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, stay with the default option. You will\n"
"be able to change that security level later with tool draksec from the\n"
"Mandrake Control Center.\n"
"\n"
"The \"%s\" field can inform the system of the user on this computer who\n"
"will be responsible for security. Security messages will be sent to that\n"
"address."
msgstr ""

#: help.pm:472
#, fuzzy, c-format
msgid "Security Administrator"
msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"

#: help.pm:475
#, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandrakelinux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it doesn't always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""

#: help.pm:544
#, c-format
msgid "Removable media auto-mounting"
msgstr ""

#: help.pm:544
#, fuzzy, c-format
msgid "Toggle between normal/expert mode"
msgstr "สำหรับผู้ชำนาญ > ปกติ"

#: help.pm:547
#, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandrakelinux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""

#: help.pm:578
#, c-format
msgid ""
"\"%s\": check the current country selection. If you are not in this\n"
"country, click on the \"%s\" button and choose another one. If your country\n"
"is not in the first list shown, click the \"%s\" button to get the complete\n"
"country list."
msgstr ""

#: help.pm:584
#, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new install or an upgrade\n"
"of an existing Mandrakelinux system:\n"
"\n"
" * \"%s\": For the most part, this completely wipes out the old system. If\n"
"you wish to change how your hard drives are partitioned, or change the file\n"
"system, you should use this option. However, depending on your partitioning\n"
"scheme, you can prevent some of your existing data from being over-written.\n"
"\n"
" * \"%s\": this installation class allows you to update the packages\n"
"currently installed on your Mandrakelinux system. Your current\n"
"partitioning scheme and user data is not altered. Most of other\n"
"configuration steps remain available, similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandrakelinux systems\n"
"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
"to Mandrakelinux version \"8.1\" is not recommended."
msgstr ""

#: help.pm:605
#, c-format
msgid ""
"Depending on the language you chose in section , DrakX will automatically\n"
"select a particular type of keyboard configuration. Check that the\n"
"selection suits you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard that corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard do not match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be presented with the complete list of\n"
"supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding that will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""

#: help.pm:624
#, c-format
msgid ""
"Your choice of preferred language will affect the language of the\n"
"documentation, the installer and the system in general. Select first the\n"
"region you are located in, and then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if you will\n"
"host users from Spain on your machine, select English as the default\n"
"language in the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. Though full support for it in GNU/Linux is\n"
"still under development. For that reason, Mandrakelinux will be using it\n"
"or not depending on the user choices:\n"
"\n"
" * If you choose a languages with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for the system at user request by\n"
"selecting option \"%s\" independently of which language(s) have been\n"
"chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several ones, or even install them all by selecting the \"%s\"\n"
"box. Selecting support for a language means translations, fonts, spell\n"
"checkers, etc. for that language will also be installed.\n"
"\n"
"To switch between the various languages installed on the system, you can\n"
"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
"language used by the entire system. Running the command as a regular user\n"
"will only change the language settings for that particular user."
msgstr ""

#: help.pm:660
#, c-format
msgid "Espanol"
msgstr ""

#: help.pm:663
#, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"In case you have a 3 buttons mouse without wheel, you can choose the mouse\n"
"that says \"%s\". DrakX will then configure your mouse so that you can\n"
"simulate the wheel with it: to do so, press the middle button and move your\n"
"mouse up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"If you choose a mouse other than the default, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and to\n"
"go back to the list of choices.\n"
"\n"
"Wheel mice are occasionally not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
"buttons and check that the mouse pointer moves on-screen as you move your\n"
"mouse."
msgstr ""

#: help.pm:691
#, fuzzy, c-format
msgid "with Wheel emulation"
msgstr "Logitech MouseMan"

#: help.pm:694
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""

#: help.pm:698
#, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you have to enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That is why you must choose a password that is difficult to\n"
"guess - DrakX will tell you if the password you chose is too easy. As you\n"
"can see, you are not forced to enter a password, but we strongly advise you\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise a system.\n"
"\n"
"One caveat -- do not make the password too long or complicated because you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it in. To reduce\n"
"the chance of a blind typing error you will need to enter the password\n"
"twice. If you do happen to make the same typing error twice, this\n"
"``incorrect'' password will be the one you will have use the first time you\n"
"connect.\n"
"\n"
"If you wish access to this computer to be controlled by an authentication\n"
"server, click the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you do not know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, if your computer\n"
"will never be connected to the Internet and you absolutely trust everybody\n"
"who uses your computer, you can choose to have \"%s\"."
msgstr ""

#: help.pm:733
#, fuzzy, c-format
msgid "authentication"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#. -PO: keep this short or else the buttons will not fit in the window
#: help.pm:733 install_steps_interactive.pm:1146
#, c-format
msgid "No password"
msgstr "ไม่มีรหัสผ่าน"

#: help.pm:736
#, c-format
msgid ""
"This dialog allows you to fine tune your bootloader:\n"
"\n"
" * \"%s\": there are three choices for your bootloader:\n"
"\n"
"    * \"%s\": if you prefer GRUB (text menu).\n"
"\n"
"    * \"%s\": if you prefer LILO with its text menu interface.\n"
"\n"
"    * \"%s\": if you prefer LILO with its graphical interface.\n"
"\n"
" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
"you prefer, the bootloader can be installed on the second hard drive\n"
"(\"%s\"), or even on a floppy disk (\"%s\");\n"
"\n"
" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
"given to the user at the console to select a boot entry other than the\n"
"default.\n"
"\n"
" * \"%s\": ACPI is a new standard (appeared during year 2002) for power\n"
"management, notably for laptops. If you know your hardware supports it and\n"
"you need it, check this box.\n"
"\n"
" * \"%s\": If you noticed hardware problems on your machine (IRQ conflicts,\n"
"instabilities, machine freeze, ...) you should try disabling APIC by\n"
"checking this box.\n"
"\n"
"!! Be aware that if you choose not to install a bootloader (by selecting\n"
"\"%s\"), you must ensure that you have a way to boot your Mandrakelinux\n"
"system! Be sure you know what you are doing before changing any of the\n"
"options. !!\n"
"\n"
"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
"are normally reserved for the expert user."
msgstr ""

#: help.pm:768
#, fuzzy, c-format
msgid "GRUB"
msgstr "GB"

#: help.pm:768
#, c-format
msgid "/dev/hda"
msgstr "/dev/hda"

#: help.pm:768
#, c-format
msgid "/dev/hdb"
msgstr "/dev/hdb"

#: help.pm:768
#, c-format
msgid "/dev/fd0"
msgstr "/dev/fd0"

#: help.pm:768
#, fuzzy, c-format
msgid "Delay before booting the default image"
msgstr "หน่วงเวลาก่อนทำการบูตอิมเมจที่ใช้"

#: help.pm:771
#, c-format
msgid ""
"After you have configured the general bootloader parameters, the list of\n"
"boot options that will be available at boot time will be displayed.\n"
"\n"
"If there are other operating systems installed on your machine they will\n"
"automatically be added to the boot menu. You can fine-tune the existing\n"
"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
"changes.\n"
"\n"
"You may also not want to give access to these other operating systems to\n"
"anyone who goes to the console and reboots the machine. You can delete the\n"
"corresponding entries for the operating systems to remove them from the\n"
"bootloader menu, but you will need a boot disk in order to boot those other\n"
"operating systems!"
msgstr ""

#: help.pm:784 interactive.pm:295 interactive/gtk.pm:480
#: standalone/drakbackup:1513 standalone/drakfont:589 standalone/drakfont:655
#: standalone/drakups:280 standalone/drakups:329 standalone/drakups:349
#: standalone/drakvpn:333 standalone/drakvpn:694
#, c-format
msgid "Add"
msgstr "เพิ่ม"

#: help.pm:784 interactive.pm:295 interactive/gtk.pm:480
#, fuzzy, c-format
msgid "Modify"
msgstr "แก้ไข RAID"

#: help.pm:784 interactive.pm:295 interactive/gtk.pm:480
#: standalone/drakups:282 standalone/drakups:331 standalone/drakups:351
#: standalone/drakvpn:333 standalone/drakvpn:694
#, fuzzy, c-format
msgid "Remove"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: help.pm:787
#, c-format
msgid ""
"LILO and GRUB are GNU/Linux bootloaders. Normally, this stage is totally\n"
"automated. DrakX will analyze the disk boot sector and act according to\n"
"what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
"boot sector. This way you will be able to load either GNU/Linux or any\n"
"other OS installed on your machine.\n"
"\n"
" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
"one.\n"
"\n"
"If it cannot make a determination, DrakX will ask you where to place the\n"
"bootloader. Generally, the \"%s\" is the safest place. Choosing \"%s\"\n"
"won't install any bootloader. Use it only if you know what you are doing."
msgstr ""

#: help.pm:803
#, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other OSs may\n"
"offer you one, but Mandrakelinux offers two. Each of the printing systems\n"
"is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
"experience with GNU/Linux.\n"
"\n"
" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
"printing to your local printer or to one halfway around the planet. It is\n"
"simple to configure and can act as a server or a client for the ancient\n"
"\"lpd \" printing system, so it is compatible with older operating systems\n"
"which may still need print services. While quite powerful, the basic setup\n"
"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
"front-ends for printing or choosing printer options and for managing the\n"
"printer.\n"
"\n"
"If you make a choice now, and later find that you don't like your printing\n"
"system you may change it by running PrinterDrake from the Mandrake Control\n"
"Center and clicking the expert button."
msgstr ""

#: help.pm:826
#, c-format
msgid "pdq"
msgstr ""

#: help.pm:826 printer/cups.pm:115 printer/data.pm:83
#, c-format
msgid "CUPS"
msgstr ""

#: help.pm:829
#, fuzzy, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
"DrakX จะพยายามหา PCI SCSI adapter(s)  ถ้า DrakX\n"
"หาเจอ SCSI adapter และรู้ว่าควรใช้ไดร์เวอร์อะไร มันก็จะ\n"
"ถูกติดตั้งโดยออโตเมติก\n"
"\n"
"\n"
"ถ้าคุณมี SCSI adapter ISA adapter หรือ PCI SCSI adapter ที่ DrakX\n"
"ไม่สามารถหาเจอ  คุณจะโดนถามว่ามี  SCSI adapter ในเครื่องของคุณ\n"
"หรือไม่  ถ้าไม่มีกรุณากดที่ \"ไม่\"  แต่ถ้าคุณกดลงที่  \"ไช่\" คุณจะต้องเลือก\n"
"ชนิดของ adapter ที่คุณมีอยู่\n"
"\n"
"\n"
"ถ้าคุณเป็นคนเลือก Adapter เอง DrakX จะถามว่าคุณจะป้อนข้อมูล\n"
"Option หรือไม่  ถึงตรงนี้คุณควรจะให้ DrakX ค้นหา option ที่เหมาะสม\n"
"ซึ่งโดยทั่วไปมันจะสามารถหาได้เองอย่างถูกต้อง\n"
"\n"
"\n"
"แต่ถ้าไม่สำเร็จคุณจำเป็นที่จะต้องให้ข้อมูล Option เอง  คุณควรหาข้อมูลเพิ่ม\n"
"เติมได้จากคู่มือ (บทที่ 3 ตอน Collective informations on your hardware ) หรือ \n"
"จาก Web Site ของผู้ผลิต หรือ จาก Microsoft Windows ถ้าคุณมีติดตั้ง"

#: help.pm:847
#, c-format
msgid ""
"You can add additional entries in yaboot for other operating systems,\n"
"alternate kernels, or for an emergency boot image.\n"
"\n"
"For other OSs, the entry consists only of a label and the \"root\"\n"
"partition.\n"
"\n"
"For Linux, there are a few possible options:\n"
"\n"
" * Label: this is the name you will have to type at the yaboot prompt to\n"
"select this boot option.\n"
"\n"
" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
"variation of vmlinux with an extension.\n"
"\n"
" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
"\n"
" * Append: on Apple hardware, the kernel append option is often used to\n"
"assist in initializing video hardware, or to enable keyboard mouse button\n"
"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
"The following are some examples:\n"
"\n"
"   \t      video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
"hda=autotune\n"
"\n"
"   \t      video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: this option can be used either to load initial modules before\n"
"the boot device is available, or to load a ramdisk image for an emergency\n"
"boot situation.\n"
"\n"
" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
"need to allocate a large ramdisk, this option can be used to specify a\n"
"ramdisk larger than the default.\n"
"\n"
" * Read-write: normally the \"root\" partition is initially mounted as\n"
"read-only, to allow a file system check before the system becomes ``live''.\n"
"You can override the default with this option.\n"
"\n"
" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
"problematic, you can select this option to boot in ``novideo'' mode, with\n"
"native frame buffer support.\n"
"\n"
" * Default: selects this entry as being the default Linux selection,\n"
"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
"highlighted with a ``*'' if you press [Tab] to see the boot selections."
msgstr ""

#: help.pm:894
#, c-format
msgid ""
"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
"detected and installed in the bootloader menu. If this is not the case, you\n"
"can add an entry by hand in this screen. Take care to choose the correct\n"
"parameters.\n"
"\n"
"Yaboot's main options are:\n"
"\n"
" * Init Message: a simple text message displayed before the boot prompt.\n"
"\n"
" * Boot Device: indicates where you want to place the information required\n"
"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
"to hold this information.\n"
"\n"
" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
"yaboot. The first delay is measured in seconds and at this point, you can\n"
"choose between CD, OF boot, MacOS or Linux;\n"
"\n"
" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
"After selecting Linux, you will have this delay in 0.1 second increments\n"
"before your default kernel description is selected;\n"
"\n"
" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
"at the first boot prompt.\n"
"\n"
" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
"Open Firmware at the first boot prompt.\n"
"\n"
" * Default OS: you can select which OS will boot by default when the Open\n"
"Firmware Delay expires."
msgstr ""

#: help.pm:926
#, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
"If you notice the sound card displayed is not the one that is actually\n"
"present on your system, you can click on the button and choose another\n"
"driver."
msgstr ""

#: help.pm:929 help.pm:991 install_steps_interactive.pm:954
#: install_steps_interactive.pm:971
#, c-format
msgid "Sound card"
msgstr "Sound card"

#: help.pm:932
#, c-format
msgid ""
"As a review, DrakX will present a summary of information it has about your\n"
"system. Depending on your installed hardware, you may have some or all of\n"
"the following entries. Each entry is made up of the configuration item to\n"
"be configured, followed by a quick summary of the current configuration.\n"
"Click on the corresponding \"%s\" button to change that.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change it if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you are not in this\n"
"country, click on the \"%s\" button and choose another one. If your country\n"
"is not in the first list shown, click the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": check the current mouse configuration and click on the button to\n"
"change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to setup a new printer. The interface\n"
"presented there is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it is displayed\n"
"here. If you notice the sound card displayed is not the one that is\n"
"actually present on your system, you can click on the button and choose\n"
"another driver.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
"configure it manually.\n"
"\n"
" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
"here. You can click on \"%s\" to change the parameters associated with the\n"
"card.\n"
"\n"
" * \"%s\": If you wish to configure your Internet or local network access\n"
"now.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click that\n"
"button. This should be reserved to advanced users.\n"
"\n"
" * \"%s\": here you'll be able to fine control which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""

#: help.pm:991 install_steps_interactive.pm:110
#: install_steps_interactive.pm:887 standalone/keyboarddrake:23
#, c-format
msgid "Keyboard"
msgstr "คีย์บอร์ด"

#: help.pm:991 install_steps_interactive.pm:913 standalone/drakclock:75
#, c-format
msgid "Timezone"
msgstr "โซนเวลา"

#: help.pm:991
#, fuzzy, c-format
msgid "Graphical Interface"
msgstr "ให้เป็นกราฟฟิคเมื่อเริ่มต้น"

#: help.pm:991 install_steps_interactive.pm:987
#, c-format
msgid "TV card"
msgstr "TV card"

#: help.pm:991
#, fuzzy, c-format
msgid "ISDN card"
msgstr "Internal ISDN card"

#: help.pm:991 install_steps_interactive.pm:1005 standalone/drakbackup:2010
#, fuzzy, c-format
msgid "Network"
msgstr "Network interface"

#: help.pm:991 install_steps_interactive.pm:1031
#, fuzzy, c-format
msgid "Security Level"
msgstr "เลือกระดับระบบรักษาความปลอดภัย"

#: help.pm:991 install_steps_interactive.pm:1045
#, c-format
msgid "Firewall"
msgstr ""

#: help.pm:991 install_steps_interactive.pm:1059
#, fuzzy, c-format
msgid "Bootloader"
msgstr "Bootloader ที่จะใช้"

#: help.pm:991 install_steps_interactive.pm:1069 services.pm:195
#, fuzzy, c-format
msgid "Services"
msgstr "อุปกรณ์"

#: help.pm:994
#, fuzzy, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandrakelinux partition. Be careful, all data on this drive will be lost\n"
"and will not be recoverable!"
msgstr ""
"เลือก harddisk ที่ต้องการลบและลง Mandrakelinux\n"
"ควรระวังเป็นอย่างมากดพราะว่าข้อมูลทุกอย่างจะถูกลบ\n"
"และจะไม่สามารถกู้คืนได้"

#: help.pm:999
#, fuzzy, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to quit this operation without losing data and partitions\n"
"present on this hard drive."
msgstr ""
"กด \"OK\" ถ้าคุณต้องการลบข้อมูลทั้งหมดบน harddisk นี้\n"
"นี่รวมถึง partitions ทั้งหมดซึ่งรวมถึง Windows ด้วย\n"
"\n"
"\n"
"กด \"ยกเลิก\" เพื่อยกเสิกการทำงานนี้"

#: install2.pm:119
#, c-format
msgid ""
"Can't access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""

#: install2.pm:169
#, c-format
msgid "You must also format %s"
msgstr ""

#: install_any.pm:402
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They don't have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""

#: install_any.pm:423
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""

#: install_any.pm:818
#, c-format
msgid "Insert a FAT formatted floppy in drive %s"
msgstr "ให้ใส่แผ่นฟล้อปปี้ที่ format แบบ FAT ลงในไดรว์ %s"

#: install_any.pm:822
#, c-format
msgid "This floppy is not FAT formatted"
msgstr "่แผ่นฟล้อปปี้นี้ ไม่ใช่ แบบFAT"

#: install_any.pm:834
#, c-format
msgid ""
"To use this saved packages selection, boot installation with ``linux "
"defcfg=floppy''"
msgstr ""
"To use this saved packages selection, boot installation with ``linux "
"defcfg=floppy''"

#: install_any.pm:862 partition_table.pm:848
#, c-format
msgid "Error reading file %s"
msgstr "มีปัญหากับการอ่านข้อมูลในไฟล์ %s"

#: install_any.pm:987
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"เกิดข้อผิดพลาดขึ้น - ไม่พบอุปกรณ์ที่ถูกต้องเพื่อจะสร้างระบบไฟล์ใหม่ "
"โปรดตรวจสอบฮาร์ดแวร์ของท่านเพื่อแก้ไขปัญหานี้"

#: install_gtk.pm:161
#, fuzzy, c-format
msgid "System installation"
msgstr "การติดตั้ง SILO"

#: install_gtk.pm:164
#, fuzzy, c-format
msgid "System configuration"
msgstr "การคอนฟิก"

#: install_interactive.pm:22
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"hardware บางชนิดต้องการ driver พิเศษ\n"
"คุณสามารถหาข้อมูลได้จาก: %s"

#: install_interactive.pm:62
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"คุณต้องมี root พาร์ติชั่น\n"
"เพราะฉนั้นคุณต้องสร้าง พาร์ติชั่น (หรือกดเลือกอันที่มีอยู่)\n"
"หลังจากนั้นเลือก ``Mount Point'' และจัดให้มันเป็น `/'"

#: install_interactive.pm:67
#, c-format
msgid ""
"You don't have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"คุณไม่มีสวอปพาร์ติชั่นเลย\n"
"\n"
"ต้องการจะทำต่อหรือไม่?"

#: install_interactive.pm:70 install_steps.pm:207
#, fuzzy, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "คุณจะต้องมีพาร์ติชั่นสวอป"

#: install_interactive.pm:97
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"

#: install_interactive.pm:105
#, c-format
msgid "Use existing partitions"
msgstr "ใช้พาร์ติชั่นที่มีอยู่"

#: install_interactive.pm:107
#, c-format
msgid "There is no existing partition to use"
msgstr "ไม่มีพาร์ติชั่นที่มีอยู่ที่ใช้งานได้"

#: install_interactive.pm:114
#, c-format
msgid "Use the Windows partition for loopback"
msgstr "ใช้ windows partion สำหรับการ Loopback"

#: install_interactive.pm:117
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "พาร์ติชั่นใหนที่ท่านต้องการใช้กับ Linux4Win"

#: install_interactive.pm:119
#, c-format
msgid "Choose the sizes"
msgstr "เลือกขนาด"

#: install_interactive.pm:120
#, c-format
msgid "Root partition size in MB: "
msgstr "ขนาดของพาร์ติชั่นรูท MB:"

#: install_interactive.pm:121
#, c-format
msgid "Swap partition size in MB: "
msgstr "ขนาดพาร์ติชั่น Swapเป็น MB: "

#: install_interactive.pm:130
#, fuzzy, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr "ไม่มี พาร์ติชั่น FAT เพื่อทำการเปี่ยนขนาดหรือให้ใช้เป็น loopback (พื้นที่ไม่พอ)"

#: install_interactive.pm:139
#, c-format
msgid "Which partition do you want to resize?"
msgstr "พาร์ติชั่นไหนที่คุณต้องการเปลี่ยนขนาด"

#: install_interactive.pm:153
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occured: %s"
msgstr ""
"ตัวเปลี่ยนขนาดไม่สามารถทำงานกับ partition ของคุณ\n"
"มีข้อผิดพลาดนี้เกิดขึ้น: %s"

#: install_interactive.pm:156
#, fuzzy, c-format
msgid "Computing the size of the Windows partition"
msgstr "ใช้พื้นที่ที่ว่างใน Windows partition"

#: install_interactive.pm:163
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandrakelinux "
"installation."
msgstr "Windows partition ของคุณกระจัดกระจายมากเกินไป กรุณา Defrag ก่อน"

#: install_interactive.pm:164
#, fuzzy, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this\n"
"operation is dangerous. If you have not already done so, you\n"
"first need to exit the installation, run \"chkdsk c:\" from a\n"
"Command Prompt under Windows (beware, running graphical program\n"
"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
"Command Prompt!), optionally run defrag, then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"ระวัง!\n"
"DrakX กำลังจะลดขนาดพาร์ติชั่นของ windows การทำงานนี้อันตลายมาก\n"
"ถ้าคุณยังไม่เคยทำมาก่อนคุณควรออกจากการทำงานนี้และรัน Scandisk บน\n"
"Windows (และ defrag) แล้วค่อยเริ่มทำงานนี้ใหม่  และคุณสมควรที่จะทำการ\n"
"Backup ข้อมูลสำคัญขึ้นมาก่อน\n"
"เมื่อคุณแน่ใจแล้ว กด OK"

#: install_interactive.pm:176
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "คุณต้องการเก็บ Windows ไว้ในขนาดใหน"

#: install_interactive.pm:177
#, c-format
msgid "partition %s"
msgstr "พาร์ติชั่น %s"

#: install_interactive.pm:186
#, c-format
msgid "Resizing Windows partition"
msgstr "คำนวณขอบเขตของระบบไฟล์ Windows"

#: install_interactive.pm:191
#, c-format
msgid "FAT resizing failed: %s"
msgstr "การกำหนดขนาด FAT เกิดการผิดพลาด: %s"

#: install_interactive.pm:206
#, fuzzy, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr "ไม่มี พาร์ติชั่น FAT เพื่อทำการเปี่ยนขนาดหรือให้ใช้เป็น loopback (พื้นที่ไม่พอ)"

#: install_interactive.pm:211
#, c-format
msgid "Remove Windows(TM)"
msgstr "ลบ Windows(TM)"

#: install_interactive.pm:213
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "คุณมี harddisk มากกว่า  1 ตัว  คุณต้องการลง linux บน harddisk ตัวใหน"

#: install_interactive.pm:217
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "ข้อมูลทั้งหมดในพาร์ติชั่นทั้งหมดจะสูญหายไป %s"

#: install_interactive.pm:230
#, c-format
msgid "Use fdisk"
msgstr "ใช้ fdisk"

#: install_interactive.pm:233
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, don't forget to save using `w'"
msgstr ""
"คุณสามารถพาร์ติชั่น %s เดี๋ยวนี้\n"
"เมื่อเสร็จแล้วอย่าลืมบันทึกโดยใช้ `w'"

#: install_interactive.pm:269
#, c-format
msgid "I can't find any room for installing"
msgstr "ผมไม่สามารถหาพื้นที่ว่างเพื่อทำการติดตั้ง"

#: install_interactive.pm:273
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "The DrakX Partitioning wizard เจอทางเลือกดังต่อไปนี้"

#: install_interactive.pm:279
#, c-format
msgid "Partitioning failed: %s"
msgstr "การทำพาร์ติชั่นล้มเหลว: %s"

#: install_interactive.pm:286
#, c-format
msgid "Bringing up the network"
msgstr "ระบบเน็ตเวิร์กกำลังจะทำงาน"

#: install_interactive.pm:291
#, c-format
msgid "Bringing down the network"
msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"

#: install_messages.pm:9
#, fuzzy, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the "
"Mandrakelinux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrakelinux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrakelinux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrakelinux\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"
msgstr ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandrake "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrakelinux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrakelinux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrakelinux\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"

#: install_messages.pm:89
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
"Software included may be covered by patents in your country. For example, "
"the\n"
"MP3 decoders included may require a licence for further usage (see\n"
"http://www.mp3licensing.com for more details). If you are unsure if a "
"patent\n"
"may be applicable to you, check your local laws."
msgstr ""

#: install_messages.pm:96
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""

#: install_messages.pm:128
#, fuzzy, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of "
"Mandrakelinux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandrakelinux User's Guide."
msgstr ""
"ขอแสดงความยินดี การติดตั้งเสร็จเรียบร้อย\n"
"ให้เอาสื่อที่ใช้บูตออกจากไดรว์ (แผ่นฟล้อปปี้หรือซีดี) กดปุ่ม reboot เพื่อรีบูต\n"
"\n"
"\n"
"สำหรับท่านที่ต้องการข้อมูลสำหรับการแก้ไขกับ ลีนุกซ์-แมนเดรก\n"
"โปรดอ่าน Errata ได้ที่ \n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"ข้อมูลสำหรับการคอนฟิกระบบของคุณ สามารถหาได้จากช่วง\n"
"บทหลังจากการติดตั้งของคู่มือแนะนำผู้ใช้งานลีนุกซ์-แมนเดรกฉบับเป็นทางการ"

#: install_messages.pm:141
#, c-format
msgid "http://www.mandrakelinux.com/en/100errata.php3"
msgstr "http://www.mandrakelinux.com/en/100errata.php3"

#: install_steps.pm:242
#, c-format
msgid "Duplicate mount point %s"
msgstr "ทำซ้ำจุดเม้าท์ %s"

#: install_steps.pm:407
#, c-format
msgid ""
"Some important packages didn't get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
"\"\n"
msgstr ""
"แพ็กเกจสำคัญบางอย่างไม่ได้ถูกติดตั้งอย่างเรียบร้อย\n"
"cdrom หรือ cdrom drive ของคุณอาจมีการเสียหาย\n"
"กรุณาตรวจสอบ cdrom ในเครื่องคอมพิวเตอร์ที่มีการติดตั้งแล้ว\n"
"โดยใช้ \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"

#: install_steps.pm:533
#, c-format
msgid "No floppy drive available"
msgstr "ไม่มีไดรว์ฟล้อปปี็เหลืออยู่"

#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
#, c-format
msgid "Entering step `%s'\n"
msgstr "เข้าสู่ขั้นตอน `%s'\n"

#: install_steps_gtk.pm:178
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandrakelinux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"เครื่องของคุณมีทรัพยากรค่อนข้างต่ำคุณอาจมีปัญหาติดตั้ง \n"
"Mandrakelinux  ถ้าเป็นเช่นนั้น กรุณาทดลองติดตั้งแบบ text \n"
"กรุณากด F1 ขณะ boot จาก cdrom แล้วพิมพ์ text"

#: install_steps_gtk.pm:232 install_steps_interactive.pm:580
#, c-format
msgid "Package Group Selection"
msgstr "เลือกกลุ่มแพ็คเก็จ"

#: install_steps_gtk.pm:294 install_steps_interactive.pm:519
#, c-format
msgid "Total size: %d / %d MB"
msgstr "ขนาดรวม: %d / %d MB "

#: install_steps_gtk.pm:340
#, c-format
msgid "Bad package"
msgstr "แพ็คเก็จชำรุด"

#: install_steps_gtk.pm:342
#, fuzzy, c-format
msgid "Version: "
msgstr "เวอร์ชั่น: %s\n"

#: install_steps_gtk.pm:343
#, fuzzy, c-format
msgid "Size: "
msgstr "ขนาด: %s"

#: install_steps_gtk.pm:343
#, fuzzy, c-format
msgid "%d KB\n"
msgstr "ขนาด: %d KB\n"

#: install_steps_gtk.pm:344
#, fuzzy, c-format
msgid "Importance: "
msgstr "ความสำคัญ: %s\n"

#: install_steps_gtk.pm:377
#, c-format
msgid "You can't select/unselect this package"
msgstr "คุณไม่สามารถเลือก/ไม่เลือกแพกเกจนี้"

#: install_steps_gtk.pm:381
#, fuzzy, c-format
msgid "due to missing %s"
msgstr "ไม่มี kdesu "

#: install_steps_gtk.pm:382
#, c-format
msgid "due to unsatisfied %s"
msgstr ""

#: install_steps_gtk.pm:383
#, c-format
msgid "trying to promote %s"
msgstr ""

#: install_steps_gtk.pm:384
#, c-format
msgid "in order to keep %s"
msgstr ""

#: install_steps_gtk.pm:389
#, c-format
msgid ""
"You can't select this package as there is not enough space left to install it"
msgstr "คุณไม่สามารถเลือก package นี้เนื่องจากคุณมีพื้นที่ไม่เพียงพอ"

#: install_steps_gtk.pm:392
#, c-format
msgid "The following packages are going to be installed"
msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกติดตั้ง"

#: install_steps_gtk.pm:393
#, c-format
msgid "The following packages are going to be removed"
msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกลบ"

#: install_steps_gtk.pm:417
#, c-format
msgid "This is a mandatory package, it can't be unselected"
msgstr "นี่คือแพกเกจที่ต้องติดตั้ง ไม่สามารถไม่เลือก"

#: install_steps_gtk.pm:419
#, c-format
msgid "You can't unselect this package. It is already installed"
msgstr "คุณไม่สามารถไม่เลือกแพกเกจนี้เพราะมันได้ถูกติดตั้งไปแล้ว"

#: install_steps_gtk.pm:422
#, c-format
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
"คุณแน่ใจว่าจะไม่เลือกมันหรือ"

#: install_steps_gtk.pm:425
#, c-format
msgid "You can't unselect this package. It must be upgraded"
msgstr "คุณไม่สามารถไม่เลือกแพกเกจนี้  มันจำเป็นที่จะต้องถูก upgrade"

#: install_steps_gtk.pm:430
#, c-format
msgid "Show automatically selected packages"
msgstr ""

#: install_steps_gtk.pm:435
#, fuzzy, c-format
msgid "Load/Save on floppy"
msgstr "บันทึกลงแผ่นฟล้อปปี้"

#: install_steps_gtk.pm:436
#, fuzzy, c-format
msgid "Updating package selection"
msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"

#: install_steps_gtk.pm:441
#, fuzzy, c-format
msgid "Minimal install"
msgstr "ออกจากการติดตั้ง"

#: install_steps_gtk.pm:455 install_steps_interactive.pm:427
#, c-format
msgid "Choose the packages you want to install"
msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง"

#: install_steps_gtk.pm:471 install_steps_interactive.pm:666
#, c-format
msgid "Installing"
msgstr "กำลังติดตั้ง"

#: install_steps_gtk.pm:477
#, fuzzy, c-format
msgid "No details"
msgstr "รายละเอียด"

#: install_steps_gtk.pm:478
#, c-format
msgid "Estimating"
msgstr "การประเมิน"

#: install_steps_gtk.pm:484
#, c-format
msgid "Time remaining "
msgstr "เวลาที่เหลือ "

#: install_steps_gtk.pm:496
#, c-format
msgid "Please wait, preparing installation..."
msgstr "กำลังเตรียมการติดตั้ง"

#: install_steps_gtk.pm:557
#, c-format
msgid "%d packages"
msgstr "แพ็คเก็จ %d ชุด"

#: install_steps_gtk.pm:562
#, c-format
msgid "Installing package %s"
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: install_steps_gtk.pm:598 install_steps_interactive.pm:88
#: install_steps_interactive.pm:690
#, c-format
msgid "Refuse"
msgstr "ไม่ยอมรับ"

#: install_steps_gtk.pm:599 install_steps_interactive.pm:691
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"เปลี่ยน  CD-ROM\n"
"\n"
"กรุณาใส่ CD-ROM \"%s\" และกด OK\n"
"ถ้่าคุณไม่มี กรุณากด ยกเลิก (cancel) เพื่อหลีกเลี่ยงการติดตั้งจาก CD-ROM นี้"

#: install_steps_gtk.pm:614 install_steps_interactive.pm:703
#, c-format
msgid "There was an error ordering packages:"
msgstr "มีปัญหาการลำดับของแพ็คเก็จ:"

#: install_steps_gtk.pm:614 install_steps_gtk.pm:618
#: install_steps_interactive.pm:703 install_steps_interactive.pm:707
#, c-format
msgid "Go on anyway?"
msgstr "ทำงานต่อหรือไม่?"

#: install_steps_gtk.pm:618 install_steps_interactive.pm:707
#, c-format
msgid "There was an error installing packages:"
msgstr "มีปัญหาการติดตั้งของแพ็คเก็จ:"

#: install_steps_gtk.pm:658 install_steps_interactive.pm:869
#: install_steps_interactive.pm:1021
#, fuzzy, c-format
msgid "not configured"
msgstr "คอนฟิกใหม่"

#: install_steps_interactive.pm:81
#, fuzzy, c-format
msgid "Do you want to recover your system?"
msgstr "คุณต้องการใช้ aboot หรือไม่"

#: install_steps_interactive.pm:82
#, c-format
msgid "License agreement"
msgstr "License agreement"

#: install_steps_interactive.pm:111
#, fuzzy, c-format
msgid "Please choose your keyboard layout."
msgstr "คุณต้องการเลือกคีย์บอร์ดเลย์เอ้าท์แบบใด "

#: install_steps_interactive.pm:113
#, fuzzy, c-format
msgid "Here is the full list of available keyboards"
msgstr "ต่อไปนี้คือ keyboard ที่ใช้ได้"

#: install_steps_interactive.pm:143
#, fuzzy, c-format
msgid "Install/Upgrade"
msgstr "ติดตั้ง/อัพเกรด "

#: install_steps_interactive.pm:144
#, fuzzy, c-format
msgid "Is this an install or an upgrade?"
msgstr "นี่เป็นการติดตั้งหรือการอัพเกรด"

#: install_steps_interactive.pm:150
#, fuzzy, c-format
msgid "Upgrade %s"
msgstr "Update"

#: install_steps_interactive.pm:160
#, fuzzy, c-format
msgid "Encryption key for %s"
msgstr "รหัสผ่านไม่เหมือนกัน"

#: install_steps_interactive.pm:177
#, fuzzy, c-format
msgid "Please choose your type of mouse."
msgstr "คุณมีเม้าส์ชนิดใด"

#: install_steps_interactive.pm:186 standalone/mousedrake:46
#, c-format
msgid "Mouse Port"
msgstr "พอร์ตของเม้าส์"

#: install_steps_interactive.pm:187 standalone/mousedrake:47
#, c-format
msgid "Please choose which serial port your mouse is connected to."
msgstr "เม้าส์ของคุณต่อเข้ากับพอร์ตอนุกรมใด"

#: install_steps_interactive.pm:197
#, c-format
msgid "Buttons emulation"
msgstr ""

#: install_steps_interactive.pm:199
#, c-format
msgid "Button 2 Emulation"
msgstr ""

#: install_steps_interactive.pm:200
#, c-format
msgid "Button 3 Emulation"
msgstr ""

#: install_steps_interactive.pm:221
#, c-format
msgid "PCMCIA"
msgstr "PCMCIA"

#: install_steps_interactive.pm:221
#, c-format
msgid "Configuring PCMCIA cards..."
msgstr "กำลังคอนฟิกการ์ด PCMCIA..."

#: install_steps_interactive.pm:228
#, c-format
msgid "IDE"
msgstr "IDE"

#: install_steps_interactive.pm:228
#, c-format
msgid "Configuring IDE"
msgstr "คอนฟิก IDE"

#: install_steps_interactive.pm:248 network/tools.pm:155
#, c-format
msgid "No partition available"
msgstr "ไม่มีพาร์ติชั่นเหลือ"

#: install_steps_interactive.pm:251
#, c-format
msgid "Scanning partitions to find mount points"
msgstr "Scanning partitions to find mount points"

#: install_steps_interactive.pm:258
#, c-format
msgid "Choose the mount points"
msgstr "เลือกจุดเม้าท์"

#: install_steps_interactive.pm:288
#, c-format
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""

#: install_steps_interactive.pm:325
#, c-format
msgid "Choose the partitions you want to format"
msgstr "เลือกพาร์ติชั่นที่คุณต้องการฟอร์แมต"

#: install_steps_interactive.pm:327
#, c-format
msgid "Check bad blocks?"
msgstr "ตรวจสอบ bad blocks"

#: install_steps_interactive.pm:359
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can lose data)"
msgstr ""

#: install_steps_interactive.pm:362
#, c-format
msgid "Not enough swap space to fulfill installation, please add some"
msgstr "ไม่มีพื้นที่สวอปเพียงพอกับการติดตั้ง โปรดเพิ่มเนื้อที่"

#: install_steps_interactive.pm:369
#, fuzzy, c-format
msgid "Looking for available packages and rebuilding rpm database..."
msgstr "กำลังหาแพ็คเก็จที่มีอยู่"

#: install_steps_interactive.pm:370 install_steps_interactive.pm:389
#, c-format
msgid "Looking for available packages..."
msgstr "กำลังหาแพ็คเก็จที่มีอยู่"

#: install_steps_interactive.pm:373
#, fuzzy, c-format
msgid "Looking at packages already installed..."
msgstr "คุณไม่สามารถไม่เลือกแพกเกจนี้เพราะมันได้ถูกติดตั้งไปแล้ว"

#: install_steps_interactive.pm:377
#, c-format
msgid "Finding packages to upgrade..."
msgstr "กำลังหาแพ็คเก็จที่จะทำการอัพเกรด"

#: install_steps_interactive.pm:398
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr "เครื่องของคุณไม่มีเนื้อที่เพียงพอในการติดตั้งหรือ upgrade (%d > %d)"

#: install_steps_interactive.pm:439
#, c-format
msgid ""
"Please choose load or save package selection on floppy.\n"
"The format is the same as auto_install generated floppies."
msgstr ""

#: install_steps_interactive.pm:441
#, fuzzy, c-format
msgid "Load from floppy"
msgstr "เรียกคืนจากแผ่นฟล้อปปี้"

#: install_steps_interactive.pm:441
#, c-format
msgid "Save on floppy"
msgstr "บันทึกลงแผ่นฟล้อปปี้"

#: install_steps_interactive.pm:445
#, fuzzy, c-format
msgid "Package selection"
msgstr "เลือกกลุ่มแพ็คเก็จ"

#: install_steps_interactive.pm:445
#, fuzzy, c-format
msgid "Loading from floppy"
msgstr "เรียกคืนจากแผ่นฟล้อปปี้"

#: install_steps_interactive.pm:450
#, fuzzy, c-format
msgid "Insert a floppy containing package selection"
msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"

#: install_steps_interactive.pm:533
#, c-format
msgid "Selected size is larger than available space"
msgstr ""

#: install_steps_interactive.pm:548
#, c-format
msgid "Type of install"
msgstr ""

#: install_steps_interactive.pm:549
#, c-format
msgid ""
"You haven't selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""

#: install_steps_interactive.pm:553
#, c-format
msgid "With basic documentation (recommended!)"
msgstr ""

#: install_steps_interactive.pm:554
#, c-format
msgid "Truly minimal install (especially no urpmi)"
msgstr ""

#: install_steps_interactive.pm:597 standalone/drakxtv:50
#, c-format
msgid "All"
msgstr "ทั้งหมด"

#: install_steps_interactive.pm:641
#, c-format
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"ถ้าคุณมี CD ทุกอย่าง กด OK\n"
"ถ้าไม่มีเลย กด ยกเลิก (cancel)\n"
"ถ้ามีแค่บางแผ่น เลือกเท่าที่มีแล้วกด OK"

#: install_steps_interactive.pm:646
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "Cd-Rom labeled \"%s\""

#: install_steps_interactive.pm:666
#, c-format
msgid "Preparing installation"
msgstr "กำลังเตรียมการติดตั้ง"

#: install_steps_interactive.pm:675
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"กำลังติดตั้งแพ็คเก็จ %s\n"
"%d%%"

#: install_steps_interactive.pm:721
#, c-format
msgid "Post-install configuration"
msgstr "การคอนฟิกหลังการติดตั้ง"

#: install_steps_interactive.pm:727
#, fuzzy, c-format
msgid "Please insert the Update Modules floppy in drive %s"
msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s "

#: install_steps_interactive.pm:748
#, c-format
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been updated after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates ?"
msgstr ""

#: install_steps_interactive.pm:769
#, fuzzy, c-format
msgid ""
"Contacting Mandrakelinux web site to get the list of available mirrors..."
msgstr "กำลังติดต่อกับมิลเรอร์ไซต์เพื่อหารายการของแพ็คเก็จที่มีให้"

#: install_steps_interactive.pm:774
#, c-format
msgid "Choose a mirror from which to get the packages"
msgstr "เลือกมิลเรอร์ไซต์ที่จะใช้ในการดาวน์โหลดแพ็คเก็จ"

#: install_steps_interactive.pm:788
#, c-format
msgid "Contacting the mirror to get the list of available packages..."
msgstr "กำลังติดต่อกับมิลเรอร์ไซต์เพื่อหารายการของแพ็คเก็จที่มีให้"

#: install_steps_interactive.pm:792
#, fuzzy, c-format
msgid "Unable to contact mirror %s"
msgstr "ไม่สามารถ forkได้.%s"

#: install_steps_interactive.pm:792
#, fuzzy, c-format
msgid "Would you like to try again?"
msgstr "คุณต้องการคอนฟิกเครื่องพิมพ์ด้วยหรือไม่"

#: install_steps_interactive.pm:818 standalone/drakclock:45
#, c-format
msgid "Which is your timezone?"
msgstr "คุณใช้ย่านเวลาใด? "

#: install_steps_interactive.pm:823
#, c-format
msgid "Automatic time synchronization (using NTP)"
msgstr ""

#: install_steps_interactive.pm:831
#, fuzzy, c-format
msgid "NTP Server"
msgstr "เซิร์ฟเวอร์ NIS"

#: install_steps_interactive.pm:873 steps.pm:30
#, c-format
msgid "Summary"
msgstr "รวมความ"

#: install_steps_interactive.pm:886 install_steps_interactive.pm:894
#: install_steps_interactive.pm:912 install_steps_interactive.pm:919
#: install_steps_interactive.pm:1068 services.pm:135
#: standalone/drakbackup:1572
#, fuzzy, c-format
msgid "System"
msgstr "System mode"

#: install_steps_interactive.pm:926 install_steps_interactive.pm:953
#: install_steps_interactive.pm:970 install_steps_interactive.pm:986
#: install_steps_interactive.pm:997
#, c-format
msgid "Hardware"
msgstr "ฮาร์ดแวร์"

#: install_steps_interactive.pm:932 install_steps_interactive.pm:941
#, c-format
msgid "Remote CUPS server"
msgstr "Remote CUPS server"

#: install_steps_interactive.pm:932
#, c-format
msgid "No printer"
msgstr "ไม่มีเครื่องพิมพ์"

#: install_steps_interactive.pm:974
#, fuzzy, c-format
msgid "Do you have an ISA sound card?"
msgstr "คุณมีอันอื่นๆอีกหรือไม่?"

#: install_steps_interactive.pm:976
#, c-format
msgid ""
"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
"card"
msgstr ""

#: install_steps_interactive.pm:978
#, c-format
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""

#: install_steps_interactive.pm:998
#, fuzzy, c-format
msgid "Graphical interface"
msgstr "ให้เป็นกราฟฟิคเมื่อเริ่มต้น"

#: install_steps_interactive.pm:1004 install_steps_interactive.pm:1019
#, fuzzy, c-format
msgid "Network & Internet"
msgstr "Network interface"

#: install_steps_interactive.pm:1020
#, fuzzy, c-format
msgid "Proxies"
msgstr "Profile: "

#: install_steps_interactive.pm:1021
#, fuzzy, c-format
msgid "configured"
msgstr "คอนฟิกใหม่"

#: install_steps_interactive.pm:1030 install_steps_interactive.pm:1044
#: steps.pm:20
#, c-format
msgid "Security"
msgstr "ระบบความป้องกัน"

#: install_steps_interactive.pm:1049
#, fuzzy, c-format
msgid "activated"
msgstr "แอ็คทีฟ"

#: install_steps_interactive.pm:1049
#, fuzzy, c-format
msgid "disabled"
msgstr "disable"

#: install_steps_interactive.pm:1058
#, fuzzy, c-format
msgid "Boot"
msgstr "Root"

#. -PO: example: lilo-graphic on /dev/hda1
#: install_steps_interactive.pm:1062
#, fuzzy, c-format
msgid "%s on %s"
msgstr "Port"

#: install_steps_interactive.pm:1073 services.pm:177
#, c-format
msgid "Services: %d activated for %d registered"
msgstr ""

#: install_steps_interactive.pm:1083
#, c-format
msgid "You have not configured X. Are you sure you really want this?"
msgstr ""

#: install_steps_interactive.pm:1141
#, c-format
msgid "Set root password and network authentication methods"
msgstr ""

#: install_steps_interactive.pm:1142
#, c-format
msgid "Set root password"
msgstr "เซ็ตรหัสผ่านรูท"

#: install_steps_interactive.pm:1152
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr "รหัสลับง่ายเกินไป (ต้องมีอย่างน้อย %d ตัวอักษร)"

#: install_steps_interactive.pm:1157 network/netconnect.pm:575
#: standalone/drakauth:26 standalone/drakconnect:461
#, c-format
msgid "Authentication"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#: install_steps_interactive.pm:1188
#, c-format
msgid "Preparing bootloader..."
msgstr "กำลังเตรียมบูตโหลดเดอร์"

#: install_steps_interactive.pm:1198
#, c-format
msgid ""
"You appear to have an OldWorld or Unknown\n"
" machine, the yaboot bootloader will not work for you.\n"
"The install will continue, but you'll\n"
" need to use BootX or some other means to boot your machine"
msgstr ""

#: install_steps_interactive.pm:1204
#, c-format
msgid "Do you want to use aboot?"
msgstr "คุณต้องการใช้ aboot หรือไม่"

#: install_steps_interactive.pm:1207
#, c-format
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"การติดตั้ง aboot ล้มเหลว\n"
"พยายามติดตั้งถึงแม้พาติชั่นแรกอาจจะเสียหาย?"

#: install_steps_interactive.pm:1218
#, fuzzy, c-format
msgid "Installing bootloader"
msgstr "ติดตั้งบูตโหลดเดอร์"

#: install_steps_interactive.pm:1225
#, c-format
msgid "Installation of bootloader failed. The following error occured:"
msgstr "การติดตั้ง bootloader ล้มเหลว ต่อไปนี้เป็นข้อผิดพลาดที่เกิดขึ้น"

#: install_steps_interactive.pm:1230
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you don't see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""

#: install_steps_interactive.pm:1243
#, c-format
msgid ""
"In this security level, access to the files in the Windows partition is "
"restricted to the administrator."
msgstr ""

#: install_steps_interactive.pm:1275 standalone/drakautoinst:76
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s "

#: install_steps_interactive.pm:1280
#, fuzzy, c-format
msgid "Please insert another floppy for drivers disk"
msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"

#: install_steps_interactive.pm:1282
#, c-format
msgid "Creating auto install floppy..."
msgstr "กำลังเตรียมการติดตั้งลงบน floppy"

#: install_steps_interactive.pm:1294
#, c-format
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"ขั้นตอนบางขั้นตอนไม่สมบูรณ์\n"
"\n"
"คุณต้องการออกจากการติดตั้งจริงๆหรือไม่?"

#: install_steps_interactive.pm:1309
#, c-format
msgid "Generate auto install floppy"
msgstr "สร้างfloppyสำหรับการติดตั้งแบบออโตเมติก"

#: install_steps_interactive.pm:1311
#, c-format
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
"การติดตั้งแบบออโตเมติกสามารถทำงานแบบเต็มรูปแบบหากต้องการ\n"
"ในกรณีนั้นมันจะใช้ harddisk  ทั้งหมด\n"
"(มันเหมาะกับการติดตั้งบนเครื่องอื่น)\n"
"คุณอาจอยากกลับไปเริ่มต้นติดตั้งใหม่\n"

#: install_steps_newt.pm:20
#, c-format
msgid "Mandrakelinux Installation %s"
msgstr "การติดตั้งลีนุกซ์-แมนเดรก %s"

#: install_steps_newt.pm:33
#, c-format
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr "  <Tab>/<Alt-Tab> ระหว่างตัวเลือก | <Space> เลือก | <F12> หน้าถัดไป "

#: interactive.pm:170
#, fuzzy, c-format
msgid "Choose a file"
msgstr "เลือกกิจกรรม"

#: interactive.pm:372
#, c-format
msgid "Basic"
msgstr ""

#: interactive.pm:403 interactive/newt.pm:308 ugtk2.pm:510
#, c-format
msgid "Finish"
msgstr "เสร็จแล้ว"

#: interactive/newt.pm:83
#, fuzzy, c-format
msgid "Do"
msgstr "ทำเรียบร้อยแล้ว"

#: interactive/stdio.pm:29 interactive/stdio.pm:148
#, c-format
msgid "Bad choice, try again\n"
msgstr "ตัวเลือกผิดพลาด โปรดทดลองอีกครั้ง\n"

#: interactive/stdio.pm:30 interactive/stdio.pm:149
#, c-format
msgid "Your choice? (default %s) "
msgstr "ตัวเลือกของคุณ? (ค่าตั้งต้น %s)"

#: interactive/stdio.pm:54
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""

#: interactive/stdio.pm:70
#, fuzzy, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr "ตัวเลือกของคุณ? (ค่าตั้งต้น %s)"

#: interactive/stdio.pm:94
#, fuzzy, c-format
msgid "Button `%s': %s"
msgstr "พาร์ติชั่น %s"

#: interactive/stdio.pm:95
#, fuzzy, c-format
msgid "Do you want to click on this button?"
msgstr "คุณต้องการใช้ aboot หรือไม่"

#: interactive/stdio.pm:104
#, fuzzy, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "ตัวเลือกของคุณ? (ค่าตั้งต้น %s)"

#: interactive/stdio.pm:104
#, c-format
msgid " enter `void' for void entry"
msgstr ""

#: interactive/stdio.pm:122
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr ""

#: interactive/stdio.pm:125
#, c-format
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""

#: interactive/stdio.pm:138
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""

#: interactive/stdio.pm:145
#, c-format
msgid "Re-submit"
msgstr ""

#: keyboard.pm:161 keyboard.pm:193
#, c-format
msgid "Czech (QWERTZ)"
msgstr "เชคโกสโลวาเกีย (QWERTZ)"

#: keyboard.pm:162 keyboard.pm:195
#, c-format
msgid "German"
msgstr "เยอรมัน"

#: keyboard.pm:163
#, c-format
msgid "Dvorak"
msgstr "Dvorak"

#: keyboard.pm:164 keyboard.pm:204
#, c-format
msgid "Spanish"
msgstr "สเปน"

#: keyboard.pm:165 keyboard.pm:205
#, c-format
msgid "Finnish"
msgstr "ฟินแลนด์"

#: keyboard.pm:166 keyboard.pm:206
#, c-format
msgid "French"
msgstr "ฝรั่งเศษ"

#: keyboard.pm:167 keyboard.pm:246
#, c-format
msgid "Norwegian"
msgstr "นอร์เวย์"

#: keyboard.pm:168
#, c-format
msgid "Polish"
msgstr "โปแลนด์"

#: keyboard.pm:169 keyboard.pm:255
#, c-format
msgid "Russian"
msgstr "รัสเซีย"

#: keyboard.pm:171 keyboard.pm:259
#, c-format
msgid "Swedish"
msgstr "สวีเดน"

#: keyboard.pm:172 keyboard.pm:278
#, c-format
msgid "UK keyboard"
msgstr "อังกฤษ"

#: keyboard.pm:173 keyboard.pm:279
#, c-format
msgid "US keyboard"
msgstr "อเมริกา"

#: keyboard.pm:175
#, fuzzy, c-format
msgid "Albanian"
msgstr "Iranian"

#: keyboard.pm:176
#, c-format
msgid "Armenian (old)"
msgstr "อาร์เมเนียน (เก่า)"

#: keyboard.pm:177
#, c-format
msgid "Armenian (typewriter)"
msgstr "อาร์เมเนียน (พิมพ์ดีด)"

#: keyboard.pm:178
#, c-format
msgid "Armenian (phonetic)"
msgstr "อาร์เมเนียน (โฟเนติค)"

#: keyboard.pm:179
#, c-format
msgid "Arabic"
msgstr ""

#: keyboard.pm:180
#, c-format
msgid "Azerbaidjani (latin)"
msgstr "Azerbaidjani (latin)"

#: keyboard.pm:182
#, c-format
msgid "Belgian"
msgstr "เบลเยี่ยม"

#: keyboard.pm:183
#, fuzzy, c-format
msgid "Bengali"
msgstr "enable"

#: keyboard.pm:184
#, fuzzy, c-format
msgid "Bulgarian (phonetic)"
msgstr "อาร์เมเนียน (โฟเนติค)"

#: keyboard.pm:185
#, fuzzy, c-format
msgid "Bulgarian (BDS)"
msgstr "บัลกาเรีย"

#: keyboard.pm:186
#, c-format
msgid "Brazilian (ABNT-2)"
msgstr "บราซิล"

#: keyboard.pm:189
#, fuzzy, c-format
msgid "Bosnian"
msgstr "Estonian"

#: keyboard.pm:190
#, c-format
msgid "Belarusian"
msgstr "Belarusian"

#: keyboard.pm:191
#, c-format
msgid "Swiss (German layout)"
msgstr "สวิส (เลย์เอ้าท์ตามเยอรมัน)"

#: keyboard.pm:192
#, c-format
msgid "Swiss (French layout)"
msgstr "สวิส (เลย์เอ้าท์ตามฝรั่งเศษ)"

#: keyboard.pm:194
#, c-format
msgid "Czech (QWERTY)"
msgstr "เชคโกสโลวาเกีย (QWERTY)"

#: keyboard.pm:196
#, c-format
msgid "German (no dead keys)"
msgstr "German (no dead keys)"

#: keyboard.pm:197
#, c-format
msgid "Devanagari"
msgstr ""

#: keyboard.pm:198
#, c-format
msgid "Danish"
msgstr "เดนมาร์ก"

#: keyboard.pm:199
#, c-format
msgid "Dvorak (US)"
msgstr "Dvorak (US)"

#: keyboard.pm:200
#, fuzzy, c-format
msgid "Dvorak (Esperanto)"
msgstr "Dvorak (Norwegian)"

#: keyboard.pm:201
#, c-format
msgid "Dvorak (Norwegian)"
msgstr "Dvorak (Norwegian)"

#: keyboard.pm:202
#, fuzzy, c-format
msgid "Dvorak (Swedish)"
msgstr "Dvorak (US)"

#: keyboard.pm:203
#, c-format
msgid "Estonian"
msgstr "Estonian"

#: keyboard.pm:207
#, c-format
msgid "Georgian (\"Russian\" layout)"
msgstr "จอร์เจีย (เลย์เอ้าท์แบบรัสเซีย)"

#: keyboard.pm:208
#, c-format
msgid "Georgian (\"Latin\" layout)"
msgstr "จอร์เจีย (เลย์เอ้าท์แบบละติน)"

#: keyboard.pm:209
#, c-format
msgid "Greek"
msgstr "กรีก"

#: keyboard.pm:210
#, c-format
msgid "Greek (polytonic)"
msgstr ""

#: keyboard.pm:211
#, c-format
msgid "Gujarati"
msgstr ""

#: keyboard.pm:212
#, c-format
msgid "Gurmukhi"
msgstr ""

#: keyboard.pm:213
#, c-format
msgid "Hungarian"
msgstr "อังการี"

#: keyboard.pm:214
#, c-format
msgid "Croatian"
msgstr "Croatian"

#: keyboard.pm:215
#, c-format
msgid "Irish"
msgstr ""

#: keyboard.pm:216
#, c-format
msgid "Israeli"
msgstr "อิสราเอล"

#: keyboard.pm:217
#, c-format
msgid "Israeli (Phonetic)"
msgstr "อิลราเอล (โฟเนติค)"

#: keyboard.pm:218
#, c-format
msgid "Iranian"
msgstr "Iranian"

#: keyboard.pm:219
#, c-format
msgid "Icelandic"
msgstr "ไอซ์แลนด์"

#: keyboard.pm:220
#, c-format
msgid "Italian"
msgstr "อิตาลี"

#: keyboard.pm:221
#, c-format
msgid "Inuktitut"
msgstr ""

#: keyboard.pm:225
#, c-format
msgid "Japanese 106 keys"
msgstr "Japanese 106 keys"

#: keyboard.pm:226
#, fuzzy, c-format
msgid "Kannada"
msgstr "ปฎิทิน"

#: keyboard.pm:229
#, c-format
msgid "Korean keyboard"
msgstr "Korean keyboard"

#: keyboard.pm:230
#, fuzzy, c-format
msgid "Kyrgyz keyboard"
msgstr "อังกฤษ"

#: keyboard.pm:231
#, c-format
msgid "Latin American"
msgstr "ละตินอเมริกา"

#: keyboard.pm:232
#, fuzzy, c-format
msgid "Laotian"
msgstr "ตำแหน่ง"

#: keyboard.pm:233
#, c-format
msgid "Lithuanian AZERTY (old)"
msgstr "Lithuanian AZERTY (old)"

#: keyboard.pm:235
#, c-format
msgid "Lithuanian AZERTY (new)"
msgstr "Lithuanian AZERTY (new)"

#: keyboard.pm:236
#, c-format
msgid "Lithuanian \"number row\" QWERTY"
msgstr "ลิธัวเนีย \"แถวตัวเลข\" QWERTY"

#: keyboard.pm:237
#, c-format
msgid "Lithuanian \"phonetic\" QWERTY"
msgstr "ลิธัวเนีย \"โฟเนติค\" QWERTY"

#: keyboard.pm:238
#, fuzzy, c-format
msgid "Latvian"
msgstr "ตำแหน่ง"

#: keyboard.pm:239
#, c-format
msgid "Malayalam"
msgstr ""

#: keyboard.pm:240
#, c-format
msgid "Macedonian"
msgstr "Macedonian"

#: keyboard.pm:241
#, c-format
msgid "Myanmar (Burmese)"
msgstr ""

#: keyboard.pm:242
#, fuzzy, c-format
msgid "Mongolian (cyrillic)"
msgstr "Azerbaidjani (cyrillic)"

#: keyboard.pm:243
#, c-format
msgid "Maltese (UK)"
msgstr ""

#: keyboard.pm:244
#, c-format
msgid "Maltese (US)"
msgstr ""

#: keyboard.pm:245
#, c-format
msgid "Dutch"
msgstr "ฮอลแลนด์"

#: keyboard.pm:247
#, c-format
msgid "Oriya"
msgstr ""

#: keyboard.pm:248
#, c-format
msgid "Polish (qwerty layout)"
msgstr "Polish (qwerty layout)"

#: keyboard.pm:249
#, c-format
msgid "Polish (qwertz layout)"
msgstr "Polish (qwertz layout)"

#: keyboard.pm:250
#, c-format
msgid "Portuguese"
msgstr "โปรตุเกส"

#: keyboard.pm:251
#, c-format
msgid "Canadian (Quebec)"
msgstr "คานาดา (ควิเบค)"

#: keyboard.pm:253
#, c-format
msgid "Romanian (qwertz)"
msgstr ""

#: keyboard.pm:254
#, c-format
msgid "Romanian (qwerty)"
msgstr ""

#: keyboard.pm:256
#, c-format
msgid "Russian (Phonetic)"
msgstr "รัสเซีย (โฟเนติค)"

#: keyboard.pm:257
#, fuzzy, c-format
msgid "Saami (norwegian)"
msgstr "Dvorak (Norwegian)"

#: keyboard.pm:258
#, c-format
msgid "Saami (swedish/finnish)"
msgstr ""

#: keyboard.pm:260
#, c-format
msgid "Slovenian"
msgstr "สโลวาเนีย"

#: keyboard.pm:261
#, c-format
msgid "Slovakian (QWERTZ)"
msgstr "สโลวาเกีย (QWERTZ)"

#: keyboard.pm:262
#, c-format
msgid "Slovakian (QWERTY)"
msgstr "สโลวาเกีย (QWERTY)"

#: keyboard.pm:264
#, fuzzy, c-format
msgid "Serbian (cyrillic)"
msgstr "Azerbaidjani (cyrillic)"

#: keyboard.pm:265
#, fuzzy, c-format
msgid "Syriac"
msgstr "พอร์ตอนุกรม"

#: keyboard.pm:266
#, fuzzy, c-format
msgid "Syriac (phonetic)"
msgstr "อาร์เมเนียน (โฟเนติค)"

#: keyboard.pm:267
#, fuzzy, c-format
msgid "Telugu"
msgstr "เบลเยี่ยม"

#: keyboard.pm:269
#, c-format
msgid "Tamil (ISCII-layout)"
msgstr ""

#: keyboard.pm:270
#, fuzzy, c-format
msgid "Tamil (Typewriter-layout)"
msgstr "อาร์เมเนียน (พิมพ์ดีด)"

#: keyboard.pm:271
#, c-format
msgid "Thai keyboard"
msgstr "ไทย"

#: keyboard.pm:273
#, fuzzy, c-format
msgid "Tajik keyboard"
msgstr "ไทย"

#: keyboard.pm:274
#, c-format
msgid "Turkish (traditional \"F\" model)"
msgstr "ตุรกี (โมเดลแบบแผน \"F\")"

#: keyboard.pm:275
#, c-format
msgid "Turkish (modern \"Q\" model)"
msgstr "ตุรกี (โมเดลสมัยใหม่ \"Q\")"

#: keyboard.pm:277
#, c-format
msgid "Ukrainian"
msgstr "ยูเครน"

#: keyboard.pm:280
#, c-format
msgid "US keyboard (international)"
msgstr "คีย์บอร์ดอเมริกัน (นานาชาติ)"

#: keyboard.pm:281
#, fuzzy, c-format
msgid "Uzbek (cyrillic)"
msgstr "Azerbaidjani (cyrillic)"

#: keyboard.pm:282
#, c-format
msgid "Vietnamese \"numeric row\" QWERTY"
msgstr "Vietnamese \"numeric row\" QWERTY"

#: keyboard.pm:283
#, fuzzy, c-format
msgid "Yugoslavian (latin)"
msgstr "ยูโกสลาเวีย (เลย์เอ้าท์แบบละติน)"

#: keyboard.pm:290
#, c-format
msgid "Right Alt key"
msgstr ""

#: keyboard.pm:291
#, c-format
msgid "Both Shift keys simultaneously"
msgstr ""

#: keyboard.pm:292
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr ""

#: keyboard.pm:293
#, c-format
msgid "CapsLock key"
msgstr ""

#: keyboard.pm:294
#, c-format
msgid "Ctrl and Alt keys simultaneously"
msgstr ""

#: keyboard.pm:295
#, c-format
msgid "Alt and Shift keys simultaneously"
msgstr ""

#: keyboard.pm:296
#, c-format
msgid "\"Menu\" key"
msgstr ""

#: keyboard.pm:297
#, c-format
msgid "Left \"Windows\" key"
msgstr ""

#: keyboard.pm:298
#, c-format
msgid "Right \"Windows\" key"
msgstr ""

#: keyboard.pm:299
#, c-format
msgid "Both Control keys simultaneously"
msgstr ""

#: keyboard.pm:300
#, c-format
msgid "Both Alt keys simultaneously"
msgstr ""

#: keyboard.pm:301
#, c-format
msgid "Left Shift key"
msgstr ""

#: keyboard.pm:302
#, c-format
msgid "Right Shift key"
msgstr ""

#: keyboard.pm:303
#, c-format
msgid "Left Alt key"
msgstr ""

#: keyboard.pm:304
#, fuzzy, c-format
msgid "Left Control key"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: keyboard.pm:305
#, fuzzy, c-format
msgid "Right Control key"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: keyboard.pm:336
#, c-format
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""

#: keyboard.pm:341
#, c-format
msgid ""
"This setting will be activated after the installation.\n"
"During installation, you will need to use the Right Control\n"
"key to switch between the different keyboard layouts."
msgstr ""

#: lang.pm:153
#, c-format
msgid "default:LTR"
msgstr "default:LTR"

#: lang.pm:169
#, fuzzy, c-format
msgid "Afghanistan"
msgstr "Iranian"

#: lang.pm:170
#, fuzzy, c-format
msgid "Andorra"
msgstr "ยกเลิก"

#: lang.pm:171
#, c-format
msgid "United Arab Emirates"
msgstr ""

#: lang.pm:172
#, c-format
msgid "Antigua and Barbuda"
msgstr ""

#: lang.pm:173
#, c-format
msgid "Anguilla"
msgstr ""

#: lang.pm:174
#, fuzzy, c-format
msgid "Albania"
msgstr "Iranian"

#: lang.pm:175
#, fuzzy, c-format
msgid "Armenia"
msgstr "อาร์เมเนียน (เก่า)"

#: lang.pm:176
#, c-format
msgid "Netherlands Antilles"
msgstr ""

#: lang.pm:177
#, c-format
msgid "Angola"
msgstr ""

#: lang.pm:178
#, c-format
msgid "Antarctica"
msgstr ""

#: lang.pm:179 standalone/drakxtv:48
#, c-format
msgid "Argentina"
msgstr ""

#: lang.pm:180
#, c-format
msgid "American Samoa"
msgstr ""

#: lang.pm:182 standalone/drakxtv:46
#, fuzzy, c-format
msgid "Australia"
msgstr "พอร์ตอนุกรม"

#: lang.pm:183
#, fuzzy, c-format
msgid "Aruba"
msgstr "Grub"

#: lang.pm:184
#, fuzzy, c-format
msgid "Azerbaijan"
msgstr "Iranian"

#: lang.pm:185
#, c-format
msgid "Bosnia and Herzegovina"
msgstr ""

#: lang.pm:186
#, c-format
msgid "Barbados"
msgstr ""

#: lang.pm:187
#, c-format
msgid "Bangladesh"
msgstr ""

#: lang.pm:189
#, c-format
msgid "Burkina Faso"
msgstr ""

#: lang.pm:190
#, fuzzy, c-format
msgid "Bulgaria"
msgstr "อังการี"

#: lang.pm:191
#, c-format
msgid "Bahrain"
msgstr ""

#: lang.pm:192
#, c-format
msgid "Burundi"
msgstr ""

#: lang.pm:193
#, fuzzy, c-format
msgid "Benin"
msgstr "เบลเยี่ยม"

#: lang.pm:194
#, fuzzy, c-format
msgid "Bermuda"
msgstr "เยอรมัน"

#: lang.pm:195
#, c-format
msgid "Brunei Darussalam"
msgstr ""

#: lang.pm:196
#, c-format
msgid "Bolivia"
msgstr ""

#: lang.pm:197
#, c-format
msgid "Brazil"
msgstr "บราซิล"

#: lang.pm:198
#, c-format
msgid "Bahamas"
msgstr ""

#: lang.pm:199
#, c-format
msgid "Bhutan"
msgstr ""

#: lang.pm:200
#, c-format
msgid "Bouvet Island"
msgstr ""

#: lang.pm:201
#, fuzzy, c-format
msgid "Botswana"
msgstr "Estonian"

#: lang.pm:202
#, fuzzy, c-format
msgid "Belarus"
msgstr "Belarusian"

#: lang.pm:203
#, fuzzy, c-format
msgid "Belize"
msgstr "เปลี่ยนขนาด"

#: lang.pm:204
#, fuzzy, c-format
msgid "Canada"
msgstr "ปฎิทิน"

#: lang.pm:205
#, c-format
msgid "Cocos (Keeling) Islands"
msgstr ""

#: lang.pm:206
#, c-format
msgid "Congo (Kinshasa)"
msgstr ""

#: lang.pm:207
#, c-format
msgid "Central African Republic"
msgstr ""

#: lang.pm:208
#, c-format
msgid "Congo (Brazzaville)"
msgstr ""

#: lang.pm:209
#, c-format
msgid "Switzerland"
msgstr ""

#: lang.pm:210
#, c-format
msgid "Cote d'Ivoire"
msgstr ""

#: lang.pm:211
#, c-format
msgid "Cook Islands"
msgstr ""

#: lang.pm:212
#, fuzzy, c-format
msgid "Chile"
msgstr "เลือก file"

#: lang.pm:213
#, c-format
msgid "Cameroon"
msgstr ""

#: lang.pm:214
#, c-format
msgid "China"
msgstr "จีน"

#: lang.pm:215
#, c-format
msgid "Colombia"
msgstr ""

#: lang.pm:217
#, c-format
msgid "Cuba"
msgstr ""

#: lang.pm:218
#, fuzzy, c-format
msgid "Cape Verde"
msgstr "ยุบ tree"

#: lang.pm:219
#, c-format
msgid "Christmas Island"
msgstr ""

#: lang.pm:220
#, c-format
msgid "Cyprus"
msgstr ""

#: lang.pm:223
#, fuzzy, c-format
msgid "Djibouti"
msgstr "เลิก"

#: lang.pm:224
#, c-format
msgid "Denmark"
msgstr ""

#: lang.pm:225
#, fuzzy, c-format
msgid "Dominica"
msgstr "โดเมน NIS"

#: lang.pm:226
#, c-format
msgid "Dominican Republic"
msgstr ""

#: lang.pm:227
#, fuzzy, c-format
msgid "Algeria"
msgstr "พอร์ตอนุกรม"

#: lang.pm:228
#, c-format
msgid "Ecuador"
msgstr ""

#: lang.pm:229
#, fuzzy, c-format
msgid "Estonia"
msgstr "Estonian"

#: lang.pm:230
#, fuzzy, c-format
msgid "Egypt"
msgstr "ว่าง"

#: lang.pm:231
#, c-format
msgid "Western Sahara"
msgstr ""

#: lang.pm:232
#, fuzzy, c-format
msgid "Eritrea"
msgstr "ส่วนของผู้เชี่ยวชาญ"

#: lang.pm:233 network/adsl_consts.pm:202 network/adsl_consts.pm:210
#: network/adsl_consts.pm:219 network/adsl_consts.pm:230
#, fuzzy, c-format
msgid "Spain"
msgstr "สเปน"

#: lang.pm:234
#, fuzzy, c-format
msgid "Ethiopia"
msgstr "Estonian"

#: lang.pm:235 network/adsl_consts.pm:127
#, c-format
msgid "Finland"
msgstr "ฟินแลนด์"

#: lang.pm:236
#, fuzzy, c-format
msgid "Fiji"
msgstr "ฟินแลนด์"

#: lang.pm:237
#, c-format
msgid "Falkland Islands (Malvinas)"
msgstr ""

#: lang.pm:238
#, fuzzy, c-format
msgid "Micronesia"
msgstr "Macedonian"

#: lang.pm:239
#, fuzzy, c-format
msgid "Faroe Islands"
msgstr "ไอซ์แลนด์"

#: lang.pm:241
#, c-format
msgid "Gabon"
msgstr ""

#: lang.pm:242 network/adsl_consts.pm:247 network/adsl_consts.pm:255
#: network/netconnect.pm:51
#, c-format
msgid "United Kingdom"
msgstr "อังกฤษ"

#: lang.pm:243
#, c-format
msgid "Grenada"
msgstr ""

#: lang.pm:244
#, fuzzy, c-format
msgid "Georgia"
msgstr "นอร์เวย์"

#: lang.pm:245
#, fuzzy, c-format
msgid "French Guiana"
msgstr "ฝรั่งเศษ"

#: lang.pm:246
#, c-format
msgid "Ghana"
msgstr ""

#: lang.pm:247
#, c-format
msgid "Gibraltar"
msgstr ""

#: lang.pm:248
#, fuzzy, c-format
msgid "Greenland"
msgstr "ไอซ์แลนด์"

#: lang.pm:249
#, c-format
msgid "Gambia"
msgstr ""

#: lang.pm:250
#, fuzzy, c-format
msgid "Guinea"
msgstr "ทั่วไป"

#: lang.pm:251
#, c-format
msgid "Guadeloupe"
msgstr ""

#: lang.pm:252
#, c-format
msgid "Equatorial Guinea"
msgstr ""

#: lang.pm:254
#, c-format
msgid "South Georgia and the South Sandwich Islands"
msgstr ""

#: lang.pm:255
#, fuzzy, c-format
msgid "Guatemala"
msgstr "เกตเวย์"

#: lang.pm:256
#, c-format
msgid "Guam"
msgstr ""

#: lang.pm:257
#, c-format
msgid "Guinea-Bissau"
msgstr ""

#: lang.pm:258
#, c-format
msgid "Guyana"
msgstr ""

#: lang.pm:259
#, c-format
msgid "China (Hong Kong)"
msgstr ""

#: lang.pm:260
#, c-format
msgid "Heard and McDonald Islands"
msgstr ""

#: lang.pm:261
#, c-format
msgid "Honduras"
msgstr ""

#: lang.pm:262
#, fuzzy, c-format
msgid "Croatia"
msgstr "Croatian"

#: lang.pm:263
#, c-format
msgid "Haiti"
msgstr ""

#: lang.pm:264 network/adsl_consts.pm:152
#, fuzzy, c-format
msgid "Hungary"
msgstr "อังการี"

#: lang.pm:265
#, fuzzy, c-format
msgid "Indonesia"
msgstr "ไม่มี"

#: lang.pm:266 standalone/drakxtv:45
#, fuzzy, c-format
msgid "Ireland"
msgstr "ไอซ์แลนด์"

#: lang.pm:267
#, fuzzy, c-format
msgid "Israel"
msgstr "อิสราเอล"

#: lang.pm:268
#, fuzzy, c-format
msgid "India"
msgstr "Iranian"

#: lang.pm:269
#, c-format
msgid "British Indian Ocean Territory"
msgstr ""

#: lang.pm:270
#, c-format
msgid "Iraq"
msgstr ""

#: lang.pm:271
#, fuzzy, c-format
msgid "Iran"
msgstr "Iranian"

#: lang.pm:272
#, fuzzy, c-format
msgid "Iceland"
msgstr "ไอซ์แลนด์"

#: lang.pm:274
#, c-format
msgid "Jamaica"
msgstr ""

#: lang.pm:275
#, fuzzy, c-format
msgid "Jordan"
msgstr "Iranian"

#: lang.pm:276
#, c-format
msgid "Japan"
msgstr "ญี่ปุ่น"

#: lang.pm:277
#, fuzzy, c-format
msgid "Kenya"
msgstr "คีย์บอร์ด"

#: lang.pm:278
#, c-format
msgid "Kyrgyzstan"
msgstr ""

#: lang.pm:279
#, c-format
msgid "Cambodia"
msgstr ""

#: lang.pm:280
#, c-format
msgid "Kiribati"
msgstr ""

#: lang.pm:281
#, c-format
msgid "Comoros"
msgstr ""

#: lang.pm:282
#, c-format
msgid "Saint Kitts and Nevis"
msgstr ""

#: lang.pm:283
#, c-format
msgid "Korea (North)"
msgstr ""

#: lang.pm:284
#, fuzzy, c-format
msgid "Korea"
msgstr "More"

#: lang.pm:285
#, fuzzy, c-format
msgid "Kuwait"
msgstr "ออก"

#: lang.pm:286
#, c-format
msgid "Cayman Islands"
msgstr ""

#: lang.pm:287
#, c-format
msgid "Kazakhstan"
msgstr ""

#: lang.pm:288
#, c-format
msgid "Laos"
msgstr ""

#: lang.pm:289
#, c-format
msgid "Lebanon"
msgstr ""

#: lang.pm:290
#, c-format
msgid "Saint Lucia"
msgstr ""

#: lang.pm:291
#, c-format
msgid "Liechtenstein"
msgstr ""

#: lang.pm:292
#, c-format
msgid "Sri Lanka"
msgstr ""

#: lang.pm:293
#, fuzzy, c-format
msgid "Liberia"
msgstr "พอร์ตอนุกรม"

#: lang.pm:294
#, c-format
msgid "Lesotho"
msgstr ""

#: lang.pm:295
#, c-format
msgid "Lithuania"
msgstr ""

#: lang.pm:296
#, c-format
msgid "Luxembourg"
msgstr ""

#: lang.pm:297
#, fuzzy, c-format
msgid "Latvia"
msgstr "ตำแหน่ง"

#: lang.pm:298
#, c-format
msgid "Libya"
msgstr ""

#: lang.pm:299
#, c-format
msgid "Morocco"
msgstr ""

#: lang.pm:300
#, fuzzy, c-format
msgid "Monaco"
msgstr "จอภาพ"

#: lang.pm:301
#, c-format
msgid "Moldova"
msgstr ""

#: lang.pm:302
#, c-format
msgid "Madagascar"
msgstr ""

#: lang.pm:303
#, c-format
msgid "Marshall Islands"
msgstr ""

#: lang.pm:304
#, fuzzy, c-format
msgid "Macedonia"
msgstr "Macedonian"

#: lang.pm:305
#, c-format
msgid "Mali"
msgstr ""

#: lang.pm:306
#, c-format
msgid "Myanmar"
msgstr ""

#: lang.pm:307
#, c-format
msgid "Mongolia"
msgstr ""

#: lang.pm:308
#, c-format
msgid "Northern Mariana Islands"
msgstr ""

#: lang.pm:309
#, c-format
msgid "Martinique"
msgstr ""

#: lang.pm:310
#, c-format
msgid "Mauritania"
msgstr ""

#: lang.pm:311
#, fuzzy, c-format
msgid "Montserrat"
msgstr "พอร์ตของเม้าส์"

#: lang.pm:312
#, c-format
msgid "Malta"
msgstr ""

#: lang.pm:313
#, c-format
msgid "Mauritius"
msgstr ""

#: lang.pm:314
#, c-format
msgid "Maldives"
msgstr ""

#: lang.pm:315
#, c-format
msgid "Malawi"
msgstr ""

#: lang.pm:316
#, fuzzy, c-format
msgid "Mexico"
msgstr "Mouse"

#: lang.pm:317
#, c-format
msgid "Malaysia"
msgstr ""

#: lang.pm:318
#, c-format
msgid "Mozambique"
msgstr ""

#: lang.pm:319
#, c-format
msgid "Namibia"
msgstr ""

#: lang.pm:320
#, fuzzy, c-format
msgid "New Caledonia"
msgstr "Macedonian"

#: lang.pm:321
#, fuzzy, c-format
msgid "Niger"
msgstr "สูง"

#: lang.pm:322
#, c-format
msgid "Norfolk Island"
msgstr ""

#: lang.pm:323
#, fuzzy, c-format
msgid "Nigeria"
msgstr "พอร์ตอนุกรม"

#: lang.pm:324
#, c-format
msgid "Nicaragua"
msgstr ""

#: lang.pm:327
#, c-format
msgid "Nepal"
msgstr ""

#: lang.pm:328
#, c-format
msgid "Nauru"
msgstr ""

#: lang.pm:329
#, fuzzy, c-format
msgid "Niue"
msgstr "NoVideo"

#: lang.pm:330
#, c-format
msgid "New Zealand"
msgstr ""

#: lang.pm:331
#, fuzzy, c-format
msgid "Oman"
msgstr "โดเมน NIS"

#: lang.pm:332
#, c-format
msgid "Panama"
msgstr ""

#: lang.pm:333
#, c-format
msgid "Peru"
msgstr ""

#: lang.pm:334
#, c-format
msgid "French Polynesia"
msgstr ""

#: lang.pm:335
#, c-format
msgid "Papua New Guinea"
msgstr ""

#: lang.pm:336
#, c-format
msgid "Philippines"
msgstr ""

#: lang.pm:337
#, c-format
msgid "Pakistan"
msgstr ""

#: lang.pm:338 network/adsl_consts.pm:186
#, fuzzy, c-format
msgid "Poland"
msgstr "ไอซ์แลนด์"

#: lang.pm:339
#, c-format
msgid "Saint Pierre and Miquelon"
msgstr ""

#: lang.pm:340
#, fuzzy, c-format
msgid "Pitcairn"
msgstr "เครื่องพิมพ์"

#: lang.pm:341
#, fuzzy, c-format
msgid "Puerto Rico"
msgstr "Protocol"

#: lang.pm:342
#, fuzzy, c-format
msgid "Palestine"
msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"

#: lang.pm:343 network/adsl_consts.pm:196
#, fuzzy, c-format
msgid "Portugal"
msgstr "Port"

#: lang.pm:344
#, c-format
msgid "Paraguay"
msgstr ""

#: lang.pm:345
#, c-format
msgid "Palau"
msgstr ""

#: lang.pm:346
#, fuzzy, c-format
msgid "Qatar"
msgstr "สถานะ:"

#: lang.pm:347
#, fuzzy, c-format
msgid "Reunion"
msgstr "ขนาดจอภาพ"

#: lang.pm:348
#, fuzzy, c-format
msgid "Romania"
msgstr "โดเมน NIS"

#: lang.pm:349
#, fuzzy, c-format
msgid "Russia"
msgstr "รัสเซีย"

#: lang.pm:350
#, c-format
msgid "Rwanda"
msgstr ""

#: lang.pm:351
#, c-format
msgid "Saudi Arabia"
msgstr ""

#: lang.pm:352
#, c-format
msgid "Solomon Islands"
msgstr ""

#: lang.pm:353
#, fuzzy, c-format
msgid "Seychelles"
msgstr "เชลล์ที่ใช้"

#: lang.pm:354
#, fuzzy, c-format
msgid "Sudan"
msgstr "SunOS"

#: lang.pm:356
#, c-format
msgid "Singapore"
msgstr ""

#: lang.pm:357
#, c-format
msgid "Saint Helena"
msgstr ""

#: lang.pm:358
#, fuzzy, c-format
msgid "Slovenia"
msgstr "สโลวาเนีย"

#: lang.pm:359
#, c-format
msgid "Svalbard and Jan Mayen Islands"
msgstr ""

#: lang.pm:360
#, fuzzy, c-format
msgid "Slovakia"
msgstr "สโลวาเนีย"

#: lang.pm:361
#, c-format
msgid "Sierra Leone"
msgstr ""

#: lang.pm:362
#, c-format
msgid "San Marino"
msgstr ""

#: lang.pm:363
#, fuzzy, c-format
msgid "Senegal"
msgstr "enable"

#: lang.pm:364
#, fuzzy, c-format
msgid "Somalia"
msgstr "โดเมน NIS"

#: lang.pm:365
#, fuzzy, c-format
msgid "Suriname"
msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"

#: lang.pm:366
#, c-format
msgid "Sao Tome and Principe"
msgstr ""

#: lang.pm:367
#, c-format
msgid "El Salvador"
msgstr ""

#: lang.pm:368
#, c-format
msgid "Syria"
msgstr ""

#: lang.pm:369
#, c-format
msgid "Swaziland"
msgstr ""

#: lang.pm:370
#, c-format
msgid "Turks and Caicos Islands"
msgstr ""

#: lang.pm:371
#, c-format
msgid "Chad"
msgstr ""

#: lang.pm:372
#, c-format
msgid "French Southern Territories"
msgstr ""

#: lang.pm:373
#, c-format
msgid "Togo"
msgstr ""

#: lang.pm:374
#, c-format
msgid "Thailand"
msgstr ""

#: lang.pm:375
#, c-format
msgid "Tajikistan"
msgstr ""

#: lang.pm:376
#, c-format
msgid "Tokelau"
msgstr ""

#: lang.pm:377
#, c-format
msgid "East Timor"
msgstr ""

#: lang.pm:378
#, c-format
msgid "Turkmenistan"
msgstr ""

#: lang.pm:379
#, c-format
msgid "Tunisia"
msgstr ""

#: lang.pm:380
#, c-format
msgid "Tonga"
msgstr ""

#: lang.pm:381
#, c-format
msgid "Turkey"
msgstr ""

#: lang.pm:382
#, c-format
msgid "Trinidad and Tobago"
msgstr ""

#: lang.pm:383
#, c-format
msgid "Tuvalu"
msgstr ""

#: lang.pm:384
#, fuzzy, c-format
msgid "Taiwan"
msgstr "ตำแหน่ง"

#: lang.pm:385
#, c-format
msgid "Tanzania"
msgstr ""

#: lang.pm:386
#, fuzzy, c-format
msgid "Ukraine"
msgstr "ยูเครน"

#: lang.pm:387
#, fuzzy, c-format
msgid "Uganda"
msgstr "Update"

#: lang.pm:388
#, c-format
msgid "United States Minor Outlying Islands"
msgstr ""

#: lang.pm:390
#, c-format
msgid "Uruguay"
msgstr ""

#: lang.pm:391
#, c-format
msgid "Uzbekistan"
msgstr ""

#: lang.pm:392
#, fuzzy, c-format
msgid "Vatican"
msgstr "ตำแหน่ง"

#: lang.pm:393
#, c-format
msgid "Saint Vincent and the Grenadines"
msgstr ""

#: lang.pm:394
#, c-format
msgid "Venezuela"
msgstr ""

#: lang.pm:395
#, c-format
msgid "Virgin Islands (British)"
msgstr ""

#: lang.pm:396
#, c-format
msgid "Virgin Islands (U.S.)"
msgstr ""

#: lang.pm:397
#, c-format
msgid "Vietnam"
msgstr ""

#: lang.pm:398
#, c-format
msgid "Vanuatu"
msgstr ""

#: lang.pm:399
#, c-format
msgid "Wallis and Futuna"
msgstr ""

#: lang.pm:400
#, c-format
msgid "Samoa"
msgstr ""

#: lang.pm:401
#, c-format
msgid "Yemen"
msgstr ""

#: lang.pm:402
#, c-format
msgid "Mayotte"
msgstr ""

#: lang.pm:403
#, c-format
msgid "Serbia & Montenegro"
msgstr ""

#: lang.pm:404 standalone/drakxtv:47
#, c-format
msgid "South Africa"
msgstr ""

#: lang.pm:405
#, c-format
msgid "Zambia"
msgstr ""

#: lang.pm:406
#, fuzzy, c-format
msgid "Zimbabwe"
msgstr "อาจจะ"

#: lang.pm:1004
#, c-format
msgid "Welcome to %s"
msgstr "ยินดีต้อนรับสู่ %s"

#: loopback.pm:32
#, c-format
msgid "Circular mounts %s\n"
msgstr "Circular mounts %s\n"

#: lvm.pm:115
#, c-format
msgid "Remove the logical volumes first\n"
msgstr "ลบ logical volume ก่อน\n"

#: modules/interactive.pm:21 standalone/drakconnect:982
#, c-format
msgid "Parameters"
msgstr "Parameters"

#: modules/interactive.pm:21 standalone/draksec:44
#, c-format
msgid "NONE"
msgstr ""

#: modules/interactive.pm:22
#, fuzzy, c-format
msgid "Module configuration"
msgstr "การคอนฟิก"

#: modules/interactive.pm:22
#, c-format
msgid "You can configure each parameter of the module here."
msgstr ""

#: modules/interactive.pm:63
#, c-format
msgid "Found %s %s interfaces"
msgstr "ตรวจพบ %s อินเทอร์เฟส %s"

#: modules/interactive.pm:64
#, c-format
msgid "Do you have another one?"
msgstr "คุณมีอันอื่นๆอีกหรือไม่?"

#: modules/interactive.pm:65
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "คุณมีอินเทอร์เฟส %s จำนวนเท่าไหร่?"

#: modules/interactive.pm:71
#, c-format
msgid "See hardware info"
msgstr "อ่านต่อข้อมูลของฮาร์ดแวร์"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: modules/interactive.pm:87
#, c-format
msgid "Installing driver for %s card %s"
msgstr "ติดตั้งไดรเวอร์สำหรับ %s การ์ด %s"

#: modules/interactive.pm:87
#, c-format
msgid "(module %s)"
msgstr "(โมดูล %s)"

#: modules/interactive.pm:98
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""

#: modules/interactive.pm:104
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"คุณสามารถป้อนข้อมูลอ๊อปชั่นให้กับโมดูล %s ได้แล้ว\n"
"อ๊อปชั่นจะอยู่ในรูปแบบ ``name=value name2=value2 ...''\n"
"ตัวอย่างเช่น, ``io=0x300 irq=7''"

#: modules/interactive.pm:106
#, c-format
msgid "Module options:"
msgstr "อ๊อปชั่นของโมดูล:"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: modules/interactive.pm:118
#, c-format
msgid "Which %s driver should I try?"
msgstr "ต้องการให้โปรแกรมทดลองใช้ไดรเวอร์ %s ชนิดใด?"

#: modules/interactive.pm:127
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without them. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"ในบางกรณี สำหรับไดรเวอร์ %s จะจำเป็นต้องใช้ข้อมูลเพิ่มเติมเพื่อ\n"
"ให้สามารถทำงานได้ถูกต้อง แม้ว่าไดรเวอร์อาจทำงานได้โดยปกติ โดยปราศจาก\n"
"ข้อมูลดังกล่าว   คุณต้องการจะระบุอ๊อปชั่นเพิ่มเติมพิเศษหรือให้โปรแกรมทำการ\n"
"ตรวจหาข้อมูลที่จำเป็นต้องใช้? ในบางกรณีการตรวจหาอาจทำให้คอมพิวเตอร์แฮงค์\n"
"แต่จะไม่เป็นอันตรายกับคอมพิวเตอร์"

#: modules/interactive.pm:131
#, c-format
msgid "Autoprobe"
msgstr "ตรวจหาอัตโนมัติ"

#: modules/interactive.pm:131
#, c-format
msgid "Specify options"
msgstr "ระบุอ๊อปชั่น"

#: modules/interactive.pm:143
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"การโหลดโมดูล %s ล้มเหลว\n"
"คุณต้องการให้ทดลองอีกครั้งด้วยพารามิเตอร์อื่นๆอีกหรือไม่?"

#: modules/parameters.pm:49
#, fuzzy, c-format
msgid "a number"
msgstr "หมายเลขโทรศัพท์"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated numbers"
msgstr ""

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated strings"
msgstr ""

#: modules/parameters.pm:53
#, c-format
msgid "comma separated numbers"
msgstr ""

#: modules/parameters.pm:53
#, fuzzy, c-format
msgid "comma separated strings"
msgstr "ฟอร์แมตพาร์ติชั่น"

#: mouse.pm:25
#, c-format
msgid "Sun - Mouse"
msgstr "Sun - Mouse"

#: mouse.pm:31 security/level.pm:12
#, c-format
msgid "Standard"
msgstr "Standard"

#: mouse.pm:32
#, c-format
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: mouse.pm:33
#, c-format
msgid "Generic PS2 Wheel Mouse"
msgstr "Generic PS2 Wheel Mouse"

#: mouse.pm:34
#, c-format
msgid "GlidePoint"
msgstr "GlidePoint"

#: mouse.pm:36 network/modem.pm:42 network/modem.pm:43 network/modem.pm:44
#: network/modem.pm:58 network/modem.pm:72 network/modem.pm:77
#: network/modem.pm:108 network/netconnect.pm:586 network/netconnect.pm:591
#: network/netconnect.pm:603 network/netconnect.pm:608
#: network/netconnect.pm:624 network/netconnect.pm:626
#, fuzzy, c-format
msgid "Automatic"
msgstr "กำหนดค่า IP แบบอัตโนมัติ"

#: mouse.pm:39 mouse.pm:73
#, c-format
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: mouse.pm:40 mouse.pm:68
#, c-format
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: mouse.pm:41
#, c-format
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: mouse.pm:42 mouse.pm:52
#, fuzzy, c-format
msgid "Microsoft Explorer"
msgstr "Microsoft IntelliMouse"

#: mouse.pm:47 mouse.pm:79
#, c-format
msgid "1 button"
msgstr "1 ปุ่ม"

#: mouse.pm:48 mouse.pm:57
#, c-format
msgid "Generic 2 Button Mouse"
msgstr "Generic 2 Button Mouse"

#: mouse.pm:50 mouse.pm:59
#, fuzzy, c-format
msgid "Generic 3 Button Mouse with Wheel emulation"
msgstr "เม้าส์แบบปกติที่ใช้งานสามปุ่ม"

#: mouse.pm:51
#, c-format
msgid "Wheel"
msgstr "Wheel"

#: mouse.pm:55
#, c-format
msgid "serial"
msgstr "พอร์ตอนุกรม"

#: mouse.pm:58
#, c-format
msgid "Generic 3 Button Mouse"
msgstr "เม้าส์แบบปกติที่ใช้งานสามปุ่ม"

#: mouse.pm:60
#, c-format
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: mouse.pm:61
#, c-format
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: mouse.pm:62
#, fuzzy, c-format
msgid "Logitech MouseMan with Wheel emulation"
msgstr "Logitech MouseMan"

#: mouse.pm:63
#, c-format
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: mouse.pm:65
#, c-format
msgid "Logitech CC Series"
msgstr "Logitech CC Series"

#: mouse.pm:66
#, fuzzy, c-format
msgid "Logitech CC Series with Wheel emulation"
msgstr "Logitech CC Series"

#: mouse.pm:67
#, c-format
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: mouse.pm:69
#, c-format
msgid "MM Series"
msgstr "MM Series"

#: mouse.pm:70
#, c-format
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: mouse.pm:71
#, c-format
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Logitech Mouse (พอร์ตอนุกรม, แบบเก่า C7)"

#: mouse.pm:72
#, fuzzy, c-format
msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
msgstr "Logitech Mouse (พอร์ตอนุกรม, แบบเก่า C7)"

#: mouse.pm:74
#, fuzzy, c-format
msgid "Kensington Thinking Mouse with Wheel emulation"
msgstr "Kensington Thinking Mouse"

#: mouse.pm:77
#, c-format
msgid "busmouse"
msgstr "busmouse"

#: mouse.pm:80
#, c-format
msgid "2 buttons"
msgstr "2 buttons"

#: mouse.pm:81
#, c-format
msgid "3 buttons"
msgstr "3 buttons"

#: mouse.pm:82
#, c-format
msgid "3 buttons with Wheel emulation"
msgstr ""

#: mouse.pm:86
#, fuzzy, c-format
msgid "Universal"
msgstr "ออกจากการติดตั้ง"

#: mouse.pm:88
#, c-format
msgid "Any PS/2 & USB mice"
msgstr ""

#: mouse.pm:92 standalone/drakvpn:1140
#, c-format
msgid "none"
msgstr "ไม่มี"

#: mouse.pm:94
#, c-format
msgid "No mouse"
msgstr "ไม่มีเม้าส์"

#: mouse.pm:514
#, c-format
msgid "Please test the mouse"
msgstr "กรุณาทดสอบเม้าส์"

#: mouse.pm:516
#, c-format
msgid "To activate the mouse,"
msgstr "เพื่อให้เม้าส์ทำงาน"

#: mouse.pm:517
#, c-format
msgid "MOVE YOUR WHEEL!"
msgstr "เลื่อนล้อของคุณ"

#: network/adsl.pm:19
#, c-format
msgid "use pppoe"
msgstr "ใช้ pppoe"

#: network/adsl.pm:20
#, c-format
msgid "use pptp"
msgstr "ใช้ pptp"

#: network/adsl.pm:21
#, c-format
msgid "use dhcp"
msgstr "ใช้ dhcp"

#: network/adsl.pm:22
#, c-format
msgid "Alcatel speedtouch usb"
msgstr ""

#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
#, fuzzy, c-format
msgid " - detected"
msgstr "ค้นพบ %s"

#: network/adsl.pm:23
#, c-format
msgid "Sagem (using pppoa) usb"
msgstr ""

#: network/adsl.pm:24
#, c-format
msgid "Sagem (using dhcp) usb"
msgstr ""

#: network/adsl.pm:35 network/netconnect.pm:761
#, c-format
msgid "Connect to the Internet"
msgstr "ต่อเข้า Internet "

#: network/adsl.pm:36 network/netconnect.pm:762
#, c-format
msgid ""
"The most common way to connect with adsl is pppoe.\n"
"Some connections use pptp, a few use dhcp.\n"
"If you don't know, choose 'use pppoe'"
msgstr ""
"การติดต่อโดยทั่วไปของ adsl คือ pppoe.\n"
"บางครั้งอาจใช้  pptp มีน้อยคนที่ใช้  dhcp.\n"
"ถ้าคุณไม่ทราบ เลือก 'use pppoe'"

#: network/adsl.pm:41 network/netconnect.pm:766
#, fuzzy, c-format
msgid "ADSL connection type :"
msgstr "LAN connection"

#: network/drakfirewall.pm:12
#, fuzzy, c-format
msgid "Web Server"
msgstr "เซิร์ฟเวอร์"

#: network/drakfirewall.pm:17
#, fuzzy, c-format
msgid "Domain Name Server"
msgstr "ชื่อโดเมน"

#: network/drakfirewall.pm:22
#, fuzzy, c-format
msgid "SSH server"
msgstr "เซิร์ฟเวอร์ NIS"

#: network/drakfirewall.pm:27
#, fuzzy, c-format
msgid "FTP server"
msgstr "เซิร์ฟเวอร์ NIS"

#: network/drakfirewall.pm:32
#, fuzzy, c-format
msgid "Mail Server"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: network/drakfirewall.pm:37
#, fuzzy, c-format
msgid "POP and IMAP Server"
msgstr "เซิร์ฟเวอร์ NIS"

#: network/drakfirewall.pm:42
#, fuzzy, c-format
msgid "Telnet server"
msgstr "X เซิร์ฟเวอร์"

#: network/drakfirewall.pm:48
#, fuzzy, c-format
msgid "Samba server"
msgstr "เซิร์ฟเวอร์ NIS"

#: network/drakfirewall.pm:54
#, fuzzy, c-format
msgid "CUPS server"
msgstr "เซิร์ฟเวอร์ DNS"

#: network/drakfirewall.pm:60
#, c-format
msgid "Echo request (ping)"
msgstr ""

#: network/drakfirewall.pm:65
#, c-format
msgid "BitTorrent"
msgstr ""

#: network/drakfirewall.pm:131
#, fuzzy, c-format
msgid "No network card"
msgstr "ไม่พบการ์ดเน็ตเวิร์ก"

#: network/drakfirewall.pm:152
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandrakelinux machine.\n"
"For a powerful and dedicated firewall solution, please look to the\n"
"specialized MandrakeSecurity Firewall distribution."
msgstr ""

#: network/drakfirewall.pm:158
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"Make sure you have configured your Network/Internet access with\n"
"drakconnect before going any further."
msgstr ""

#: network/drakfirewall.pm:175
#, c-format
msgid "Which services would you like to allow the Internet to connect to?"
msgstr ""

#: network/drakfirewall.pm:176
#, c-format
msgid ""
"You can enter miscellaneous ports. \n"
"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
"Have a look at /etc/services for information."
msgstr ""

#: network/drakfirewall.pm:182
#, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535.\n"
"\n"
"You can also give a range of ports (eg: 24300:24350/udp)"
msgstr ""

#: network/drakfirewall.pm:192
#, c-format
msgid "Everything (no firewall)"
msgstr ""

#: network/drakfirewall.pm:194
#, fuzzy, c-format
msgid "Other ports"
msgstr "กำลังตรวจสอบพอร์ต"

#: network/isdn.pm:109 network/netconnect.pm:436
#, c-format
msgid "Unlisted - edit manually"
msgstr ""

#: network/isdn.pm:151 network/netconnect.pm:385
#, c-format
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: network/isdn.pm:151 network/netconnect.pm:385
#, c-format
msgid "I don't know"
msgstr "ผมไม่ทราบ"

#: network/isdn.pm:152 network/netconnect.pm:385
#, c-format
msgid "PCI"
msgstr "PCI"

#: network/isdn.pm:153 network/netconnect.pm:385
#, c-format
msgid "USB"
msgstr ""

#: network/modem.pm:42 network/modem.pm:43 network/modem.pm:44
#: network/netconnect.pm:591 network/netconnect.pm:608
#: network/netconnect.pm:624
#, fuzzy, c-format
msgid "Manual"
msgstr "เลือกภาษาที่คุณใช้"

#: network/netconnect.pm:88 network/netconnect.pm:465
#: network/netconnect.pm:475
#, fuzzy, c-format
msgid "Manual choice"
msgstr "เลือกภาษาที่คุณใช้"

#: network/netconnect.pm:88
#, c-format
msgid "Internal ISDN card"
msgstr "Internal ISDN card"

#: network/netconnect.pm:97
#, c-format
msgid "Ad-hoc"
msgstr ""

#: network/netconnect.pm:98
#, fuzzy, c-format
msgid "Managed"
msgstr "เลือกภาษาที่คุณใช้"

#: network/netconnect.pm:99
#, fuzzy, c-format
msgid "Master"
msgstr "Mouse"

#: network/netconnect.pm:100
#, fuzzy, c-format
msgid "Repeater"
msgstr "เรียกคืนจากไฟล์"

#: network/netconnect.pm:101
#, fuzzy, c-format
msgid "Secondary"
msgstr "%d วินาที"

#: network/netconnect.pm:102
#, fuzzy, c-format
msgid "Auto"
msgstr "เลิก"

#: network/netconnect.pm:105 printer/printerdrake.pm:1133
#: standalone/drakups:64
#, fuzzy, c-format
msgid "Manual configuration"
msgstr "การคอนฟิก"

#: network/netconnect.pm:106
#, fuzzy, c-format
msgid "Automatic IP (BOOTP/DHCP)"
msgstr "กำหนดค่า IP แบบอัตโนมัติ"

#: network/netconnect.pm:108
#, c-format
msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
msgstr ""

#: network/netconnect.pm:111
#, fuzzy, c-format
msgid "Protocol for the rest of the world"
msgstr "Rest of the world"

#: network/netconnect.pm:113 standalone/drakconnect:541
#, fuzzy, c-format
msgid "European protocol (EDSS1)"
msgstr "ยุโรป (EDS11)"

#: network/netconnect.pm:114 standalone/drakconnect:542
#, fuzzy, c-format
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr ""
"Rest of the world \n"
"No D-Channel (leased lines)"

#: network/netconnect.pm:147
#, fuzzy, c-format
msgid "Alcatel speedtouch USB modem"
msgstr "กรุณาทดสอบเม้าส์"

#: network/netconnect.pm:148
#, fuzzy, c-format
msgid "Sagem USB modem"
msgstr "System mode"

#: network/netconnect.pm:149
#, c-format
msgid "Bewan modem"
msgstr ""

#: network/netconnect.pm:150
#, c-format
msgid "ECI Hi-Focus modem"
msgstr ""

#: network/netconnect.pm:154
#, c-format
msgid "Dynamic Host Configuration Protocol (DHCP)"
msgstr ""

#: network/netconnect.pm:155
#, fuzzy, c-format
msgid "Manual TCP/IP configuration"
msgstr "การคอนฟิก"

#: network/netconnect.pm:156
#, c-format
msgid "Point to Point Tunneling Protocol (PPTP)"
msgstr ""

#: network/netconnect.pm:157
#, c-format
msgid "PPP over Ethernet (PPPoE)"
msgstr ""

#: network/netconnect.pm:158
#, c-format
msgid "PPP over ATM (PPPoA)"
msgstr ""

#: network/netconnect.pm:162
#, fuzzy, c-format
msgid "Bridged Ethernet LLC"
msgstr "Ethernet Card"

#: network/netconnect.pm:163
#, fuzzy, c-format
msgid "Bridged Ethernet VC"
msgstr "Ethernet Card"

#: network/netconnect.pm:164
#, c-format
msgid "Routed IP LLC"
msgstr ""

#: network/netconnect.pm:165
#, c-format
msgid "Routed IP VC"
msgstr ""

#: network/netconnect.pm:166
#, c-format
msgid "PPPOA LLC"
msgstr ""

#: network/netconnect.pm:167
#, c-format
msgid "PPPOA VC"
msgstr ""

#: network/netconnect.pm:171 standalone/drakconnect:477
#, c-format
msgid "Script-based"
msgstr "รูปแบบสคริปต์"

#: network/netconnect.pm:172 standalone/drakconnect:477
#, c-format
msgid "PAP"
msgstr "PAP"

#: network/netconnect.pm:173 standalone/drakconnect:477
#, c-format
msgid "Terminal-based"
msgstr "รูปแบบเทอร์มินอล"

#: network/netconnect.pm:174 standalone/drakconnect:477
#, c-format
msgid "CHAP"
msgstr ""

#: network/netconnect.pm:175 standalone/drakconnect:477
#, c-format
msgid "PAP/CHAP"
msgstr ""

#: network/netconnect.pm:228 standalone/drakconnect:55
#, fuzzy, c-format
msgid "Network & Internet Configuration"
msgstr "การคอนฟิกระบบเน็ตเวิร์ก"

#: network/netconnect.pm:234
#, fuzzy, c-format
msgid "(detected on port %s)"
msgstr "ค้นหาเจอบน port %s"

#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
#: network/netconnect.pm:236
#, fuzzy, c-format
msgid "(detected %s)"
msgstr "ค้นพบ %s"

#: network/netconnect.pm:236
#, fuzzy, c-format
msgid "(detected)"
msgstr "ค้นพบ %s"

#: network/netconnect.pm:238
#, fuzzy, c-format
msgid "Modem connection"
msgstr "การติดต่อโดยใช้ Modem ธรรมดา"

#: network/netconnect.pm:239
#, c-format
msgid "ISDN connection"
msgstr "การติดต่อโดยใช้ ISDN"

#: network/netconnect.pm:240
#, fuzzy, c-format
msgid "ADSL connection"
msgstr "LAN connection"

#: network/netconnect.pm:241
#, c-format
msgid "Cable connection"
msgstr "cable connection"

#: network/netconnect.pm:242
#, c-format
msgid "LAN connection"
msgstr "LAN connection"

#: network/netconnect.pm:243 network/netconnect.pm:257
#, fuzzy, c-format
msgid "Wireless connection"
msgstr "cable connection"

#: network/netconnect.pm:253
#, fuzzy, c-format
msgid "Choose the connection you want to configure"
msgstr "เลือกเครื่องมือที่คุณต้องการใช้"

#: network/netconnect.pm:270
#, fuzzy, c-format
msgid ""
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press \"%s\" to continue."
msgstr ""
"\n"
"คุณสามารถเลิกติดต่อหรือทำการปรับแต่งการติดต่อของคุณใหม่"

#: network/netconnect.pm:278 network/netconnect.pm:788
#, c-format
msgid "Connection Configuration"
msgstr "การคอนฟิก Connection"

#: network/netconnect.pm:279 network/netconnect.pm:789
#, c-format
msgid "Please fill or check the field below"
msgstr "กรุณาเลือกช่องข้างล่างนี้"

#: network/netconnect.pm:286 standalone/drakconnect:532
#, c-format
msgid "Card IRQ"
msgstr "Card IRQ"

#: network/netconnect.pm:287 standalone/drakconnect:533
#, c-format
msgid "Card mem (DMA)"
msgstr "Card mem (DMA)"

#: network/netconnect.pm:288 standalone/drakconnect:534
#, c-format
msgid "Card IO"
msgstr "Card IO"

#: network/netconnect.pm:289 standalone/drakconnect:535
#, c-format
msgid "Card IO_0"
msgstr "Card IO_0"

#: network/netconnect.pm:290
#, c-format
msgid "Card IO_1"
msgstr "Card IO_1"

#: network/netconnect.pm:291
#, c-format
msgid "Your personal phone number"
msgstr "เบอร์โทรศัพท์ส่วนตัว"

#: network/netconnect.pm:292 network/netconnect.pm:792
#, c-format
msgid "Provider name (ex provider.net)"
msgstr "ชื่อผู้ให้บริการ (ex KSC)"

#: network/netconnect.pm:293 standalone/drakconnect:473
#, c-format
msgid "Provider phone number"
msgstr "หมายเลขโทรศัพท์"

#: network/netconnect.pm:294
#, fuzzy, c-format
msgid "Provider DNS 1 (optional)"
msgstr "ผู้ให้บริการ dns 1 (optional)"

#: network/netconnect.pm:295
#, fuzzy, c-format
msgid "Provider DNS 2 (optional)"
msgstr "ผู้ให้บริการ dns 2 (optional)"

#: network/netconnect.pm:296 standalone/drakconnect:429
#, c-format
msgid "Dialing mode"
msgstr "การหมุนโทรศัพท์ด้วยโมเด็ม"

#: network/netconnect.pm:297 standalone/drakconnect:434
#: standalone/drakconnect:495
#, fuzzy, c-format
msgid "Connection speed"
msgstr "ชนิดการเชื่อมต่อ"

#: network/netconnect.pm:298 standalone/drakconnect:439
#, fuzzy, c-format
msgid "Connection timeout (in sec)"
msgstr "ชนิดการเชื่อมต่อ"

#: network/netconnect.pm:301 network/netconnect.pm:795
#: standalone/drakconnect:471
#, c-format
msgid "Account Login (user name)"
msgstr "Account Login (user name)"

#: network/netconnect.pm:302 network/netconnect.pm:796
#: standalone/drakconnect:472
#, c-format
msgid "Account Password"
msgstr "รหัสผ่าน"

#: network/netconnect.pm:332 network/netconnect.pm:649
#: network/netconnect.pm:827
#, fuzzy, c-format
msgid "Select the network interface to configure:"
msgstr "เลือก network interface"

#: network/netconnect.pm:334 network/netconnect.pm:375
#: network/netconnect.pm:650 network/netconnect.pm:829 network/shorewall.pm:84
#: standalone/drakconnect:656 standalone/drakgw:225 standalone/drakvpn:221
#, fuzzy, c-format
msgid "Net Device"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: network/netconnect.pm:335 network/netconnect.pm:343
#, c-format
msgid "External ISDN modem"
msgstr "External ISDN modem"

#. -PO: Do not alter the <span ..> and </span> tags
#: network/netconnect.pm:374 standalone/harddrake2:121
#, fuzzy, c-format
msgid "Select a device !"
msgstr "เลือกกราฟฟิคการ์ด"

#: network/netconnect.pm:383 network/netconnect.pm:393
#: network/netconnect.pm:403 network/netconnect.pm:419
#: network/netconnect.pm:433
#, c-format
msgid "ISDN Configuration"
msgstr "การคอนฟิก ISDN"

#: network/netconnect.pm:384
#, c-format
msgid "What kind of card do you have?"
msgstr "คุณมีการ์ดชนิดใด?"

#: network/netconnect.pm:394
#, c-format
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
"card.\n"
msgstr ""
"\n"
"ถ้าคุณมี การ์ด ISA ตัวเลขในหน้าต่อไปควรจะถูกต้องอยู่แล้ว\n"
"\n"
"ถ้าคุณมีการ์ด PCMCIA คุณต้องรู้ irq และ io ของการ์ดของคุณ\n"

#: network/netconnect.pm:398
#, c-format
msgid "Continue"
msgstr "ทำงานต่อหรือไม่?"

#: network/netconnect.pm:398
#, c-format
msgid "Abort"
msgstr "เลิก"

#: network/netconnect.pm:404
#, fuzzy, c-format
msgid "Which of the following is your ISDN card?"
msgstr "คุณใช้การ์ด ISDN ใด?"

#: network/netconnect.pm:419
#, c-format
msgid "Which protocol do you want to use?"
msgstr "Protocol ไหนที่คุณต้องการ"

#: network/netconnect.pm:421 standalone/drakconnect:116
#: standalone/drakconnect:318 standalone/drakconnect:540
#: standalone/drakvpn:1142
#, c-format
msgid "Protocol"
msgstr "Protocol"

#: network/netconnect.pm:433
#, c-format
msgid ""
"Select your provider.\n"
"If it isn't listed, choose Unlisted."
msgstr ""
"เลือกผู้ให้บริการ\n"
"ถ้าไม่มีเลือก ไม่มี (unlisted)"

#: network/netconnect.pm:435 network/netconnect.pm:541
#: network/netconnect.pm:683
#, fuzzy, c-format
msgid "Provider:"
msgstr "Profile: "

#: network/netconnect.pm:450
#, c-format
msgid ""
"Your modem isn't supported by the system.\n"
"Take a look at http://www.linmodems.org"
msgstr ""

#: network/netconnect.pm:462
#, fuzzy, c-format
msgid "Select the modem to configure:"
msgstr "เลือก network interface"

#: network/netconnect.pm:469 standalone/drakgw:113 standalone/drakvpn:51
#, c-format
msgid "Sorry, we support only 2.4 and above kernels."
msgstr ""

#: network/netconnect.pm:510
#, c-format
msgid "Please choose which serial port your modem is connected to."
msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"

#: network/netconnect.pm:539
#, fuzzy, c-format
msgid "Select your provider:"
msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"

#: network/netconnect.pm:568
#, fuzzy, c-format
msgid "Dialup: account options"
msgstr "อ็อปชั่นของการหมุนโทรศัพท์"

#: network/netconnect.pm:571
#, c-format
msgid "Connection name"
msgstr "ชื่อการเชื่อมต่อ"

#: network/netconnect.pm:572
#, c-format
msgid "Phone number"
msgstr "หมายเลขโทรศัพท์"

#: network/netconnect.pm:573
#, c-format
msgid "Login ID"
msgstr "หมายเลขประจำตัวการล็อกอิน"

#: network/netconnect.pm:588 network/netconnect.pm:621
#, fuzzy, c-format
msgid "Dialup: IP parameters"
msgstr "Parameters"

#: network/netconnect.pm:591
#, fuzzy, c-format
msgid "IP parameters"
msgstr "Parameters"

#: network/netconnect.pm:592 network/netconnect.pm:919
#: printer/printerdrake.pm:431 standalone/drakconnect:116
#: standalone/drakconnect:332 standalone/drakconnect:829
#: standalone/drakups:266
#, c-format
msgid "IP address"
msgstr "ค่า IP"

#: network/netconnect.pm:593
#, fuzzy, c-format
msgid "Subnet mask"
msgstr "เน็ตมาสก์"

#: network/netconnect.pm:605
#, c-format
msgid "Dialup: DNS parameters"
msgstr ""

#: network/netconnect.pm:608
#, fuzzy, c-format
msgid "DNS"
msgstr "ใช้ NIS"

#: network/netconnect.pm:609
#, c-format
msgid "Domain name"
msgstr "ชื่อโดเมน"

#: network/netconnect.pm:610 network/netconnect.pm:793
#: standalone/drakconnect:947
#, c-format
msgid "First DNS Server (optional)"
msgstr "เซิรฟ์เวอร์ DNS เครื่องแรก (optional)"

#: network/netconnect.pm:611 network/netconnect.pm:794
#: standalone/drakconnect:948
#, c-format
msgid "Second DNS Server (optional)"
msgstr "เซิรฟ์เวอร์ DNS เครื่องที่สอง (optional)"

#: network/netconnect.pm:612
#, fuzzy, c-format
msgid "Set hostname from IP"
msgstr "ชื่อของเครื่องพิมพ์"

#: network/netconnect.pm:624 standalone/drakconnect:343
#, c-format
msgid "Gateway"
msgstr "เกตเวย์"

#: network/netconnect.pm:625
#, fuzzy, c-format
msgid "Gateway IP address"
msgstr "ค่า IP"

#: network/netconnect.pm:649
#, fuzzy, c-format
msgid "ADSL configuration"
msgstr "การปรับแต่ง LAN"

#: network/netconnect.pm:681
#, fuzzy, c-format
msgid "Please choose your ADSL provider"
msgstr "คุณมีเม้าส์ชนิดใด"

#: network/netconnect.pm:699
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"You can provide it now via a floppy or your windows partition,\n"
"or skip and do it later."
msgstr ""

#: network/netconnect.pm:703 network/netconnect.pm:708
#, fuzzy, c-format
msgid "Use a floppy"
msgstr "บันทึกลงแผ่นฟล้อปปี้"

#: network/netconnect.pm:703 network/netconnect.pm:712
#, fuzzy, c-format
msgid "Use my Windows partition"
msgstr "คำนวณขอบเขตของระบบไฟล์ Windows"

#: network/netconnect.pm:703 network/netconnect.pm:715
#, c-format
msgid "Do it later"
msgstr ""

#: network/netconnect.pm:722
#, c-format
msgid "Firmware copy failed, file %s not found"
msgstr ""

#: network/netconnect.pm:729
#, c-format
msgid "Firmware copy succeeded"
msgstr ""

#: network/netconnect.pm:744
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"Download it at:\n"
"%s\n"
"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""

#: network/netconnect.pm:797
#, c-format
msgid "Virtual Path ID (VPI):"
msgstr ""

#: network/netconnect.pm:798
#, c-format
msgid "Virtual Circuit ID (VCI):"
msgstr ""

#: network/netconnect.pm:800
#, fuzzy, c-format
msgid "Encapsulation :"
msgstr "ขอแสดงความยินดี"

#: network/netconnect.pm:817
#, c-format
msgid ""
"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
"problem.\n"
"\n"
"You can find a driver on http://eciadsl.flashtux.org/"
msgstr ""

#: network/netconnect.pm:829
#, c-format
msgid "Manually load a driver"
msgstr ""

#: network/netconnect.pm:844
#, c-format
msgid ""
"WARNING: this device has been previously configured to connect to the "
"Internet.\n"
"Simply accept to keep this device configured.\n"
"Modifying the fields below will override this configuration."
msgstr ""
"คำเตือน: อุปกรณ์นี้ได้ถูกปรับแต่งให้ใช้ในการต่อเข้า internet\n"
"คุณสามารถยอมรับค่าต่างๆหรือทำการแก้ใขค่าต่างๆข้างล่างนี้\n"
" "

#: network/netconnect.pm:857 network/netconnect.pm:1228
#, fuzzy, c-format
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"\n"
msgstr ""
"การปรับแต่ง internet/network เรียบร้อยแล้ว\n"
"\n"
"ค่าต่างๆจะถูกนำไปใช้เดี๋ยวนี้\n"

#: network/netconnect.pm:871
#, fuzzy, c-format
msgid "Zeroconf hostname resolution"
msgstr "ชื่อโฮสต์:"

#: network/netconnect.pm:872 network/netconnect.pm:906
#, fuzzy, c-format
msgid "Configuring network device %s (driver %s)"
msgstr "กำลังคอนฟิกอุปกรณ์เน็ตเวิร์ก %s"

#: network/netconnect.pm:873
#, c-format
msgid ""
"The following protocols can be used to configure an ethernet connection. "
"Please choose the one you want to use"
msgstr ""

#: network/netconnect.pm:907
#, c-format
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"โปรดกรอกข้อมูลการคอนฟิกค่า IP สำหรับเครื่องนี้\n"
"ข้อมูลแต่ละอย่างสามารถใส่เข้าไปได้โดยใช้ค่า IP ในรูปแบบตัวเลขคั่นด้วยจุด\n"
"(dotted-decimal notation) ตัวอย่างเช่น 1.2.3.4"

#: network/netconnect.pm:914
#, fuzzy, c-format
msgid "Assign host name from DHCP address"
msgstr "กรุณาทดสอบเม้าส์"

#: network/netconnect.pm:915
#, fuzzy, c-format
msgid "DHCP host name"
msgstr "ชื่อโฮสต์:"

#: network/netconnect.pm:920 standalone/drakconnect:337
#: standalone/drakconnect:830 standalone/drakgw:321
#, c-format
msgid "Netmask"
msgstr "เน็ตมาสก์"

#: network/netconnect.pm:922 standalone/drakconnect:422
#, c-format
msgid "Track network card id (useful for laptops)"
msgstr ""

#: network/netconnect.pm:923 standalone/drakconnect:423
#, fuzzy, c-format
msgid "Network Hotplugging"
msgstr "การคอนฟิกระบบเน็ตเวิร์ก"

#: network/netconnect.pm:924 standalone/drakconnect:417
#, fuzzy, c-format
msgid "Start at boot"
msgstr "เริ่มทำงานตอน boot"

#: network/netconnect.pm:926 standalone/drakconnect:833
#, c-format
msgid "DHCP client"
msgstr "DHCP client"

#: network/netconnect.pm:936 printer/printerdrake.pm:1383
#: standalone/drakconnect:621
#, c-format
msgid "IP address should be in format 1.2.3.4"
msgstr "ค่าของ IP ควรอยู่ในรูปแบบ 1.2.3.4"

#: network/netconnect.pm:939
#, c-format
msgid "Warning : IP address %s is usually reserved !"
msgstr ""

#: network/netconnect.pm:969 network/netconnect.pm:998
#, c-format
msgid "Please enter the wireless parameters for this card:"
msgstr ""

#: network/netconnect.pm:972 standalone/drakconnect:389
#, fuzzy, c-format
msgid "Operating Mode"
msgstr "โหมดผู้เชี่ยวชาญ"

#: network/netconnect.pm:974 standalone/drakconnect:390
#, c-format
msgid "Network name (ESSID)"
msgstr ""

#: network/netconnect.pm:975 standalone/drakconnect:391
#, fuzzy, c-format
msgid "Network ID"
msgstr "Network interface"

#: network/netconnect.pm:976 standalone/drakconnect:392
#, c-format
msgid "Operating frequency"
msgstr ""

#: network/netconnect.pm:977 standalone/drakconnect:393
#, c-format
msgid "Sensitivity threshold"
msgstr ""

#: network/netconnect.pm:978 standalone/drakconnect:394
#, c-format
msgid "Bitrate (in b/s)"
msgstr ""

#: network/netconnect.pm:984
#, c-format
msgid ""
"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
"frequency), or add enough '0' (zeroes)."
msgstr ""

#: network/netconnect.pm:988
#, c-format
msgid ""
"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
"enough '0' (zeroes)."
msgstr ""

#: network/netconnect.pm:1001 standalone/drakconnect:405
#, c-format
msgid "RTS/CTS"
msgstr ""

#: network/netconnect.pm:1002
#, c-format
msgid ""
"RTS/CTS adds a handshake before each packet transmission to make sure that "
"the\n"
"channel is clear. This adds overhead, but increase performance in case of "
"hidden\n"
"nodes or large number of active nodes. This parameter sets the size of the\n"
"smallest packet for which the node sends RTS, a value equal to the maximum\n"
"packet size disable the scheme. You may also set this parameter to auto, "
"fixed\n"
"or off."
msgstr ""

#: network/netconnect.pm:1009 standalone/drakconnect:406
#, fuzzy, c-format
msgid "Fragmentation"
msgstr "Workstation ที่ทำงาน"

#: network/netconnect.pm:1010 standalone/drakconnect:407
#, c-format
msgid "Iwconfig command extra arguments"
msgstr ""

#: network/netconnect.pm:1011
#, c-format
msgid ""
"Here, one can configure some extra wireless parameters such as:\n"
"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
"as the hostname).\n"
"\n"
"See iwpconfig(8) man page for further information."
msgstr ""

#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
#: network/netconnect.pm:1018 standalone/drakconnect:408
#, c-format
msgid "Iwspy command extra arguments"
msgstr ""

#: network/netconnect.pm:1019
#, c-format
msgid ""
"Iwspy is used to set a list of addresses in a wireless network\n"
"interface and to read back quality of link information for each of those.\n"
"\n"
"This information is the same as the one available in /proc/net/wireless :\n"
"quality of the link, signal strength and noise level.\n"
"\n"
"See iwpspy(8) man page for further information."
msgstr ""

#: network/netconnect.pm:1027 standalone/drakconnect:409
#, c-format
msgid "Iwpriv command extra arguments"
msgstr ""

#: network/netconnect.pm:1028
#, c-format
msgid ""
"Iwpriv enable to set up optionals (private) parameters of a wireless "
"network\n"
"interface.\n"
"\n"
"Iwpriv deals with parameters and setting specific to each driver (as opposed "
"to\n"
"iwconfig which deals with generic ones).\n"
"\n"
"In theory, the documentation of each device driver should indicate how to "
"use\n"
"those interface specific commands and their effect.\n"
"\n"
"See iwpriv(8) man page for further information."
msgstr ""

#: network/netconnect.pm:1055
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system.\n"
"I cannot set up this connection type."
msgstr ""
"ไม่พบการ์ด ethernet \n"
"ผมไม่สามารถจัดทำการติดต่อชนิดนี้"

#: network/netconnect.pm:1059 standalone/drakgw:261 standalone/drakpxe:142
#, c-format
msgid "Choose the network interface"
msgstr "เลือก network interface"

#: network/netconnect.pm:1060
#, c-format
msgid ""
"Please choose which network adapter you want to use to connect to Internet."
msgstr "กรุณาเลือก Network Adaptor สำหรับการต่อเข้า Internet"

#: network/netconnect.pm:1081
#, c-format
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one."
msgstr ""
"โปรดใส่ชื่อของโฮสต์\n"
"ชื่อของโฮสต์ควรใส่เต็มรูปแบบ (รวมชื่อโดเมนด้วย)\n"
"ตัวอย่างเช่น ``mybox.mylab.yco.com''\n"
"คุณอาจจะใส่ค่า IP ของเกตเวย์ด้วยถ้าคุณมีเครื่องที่ทำหน้าที่เป็นเกตเวย์อยู่"

#: network/netconnect.pm:1085
#, c-format
msgid "Last but not least you can also type in your DNS server IP addresses."
msgstr ""

#: network/netconnect.pm:1087 standalone/drakconnect:946
#, fuzzy, c-format
msgid "Host name (optional)"
msgstr "การคอนฟิก"

#: network/netconnect.pm:1087
#, c-format
msgid "Host name"
msgstr "ชื่อโฮสต์:"

#: network/netconnect.pm:1089
#, fuzzy, c-format
msgid "DNS server 1"
msgstr "เซิร์ฟเวอร์ DNS"

#: network/netconnect.pm:1090
#, fuzzy, c-format
msgid "DNS server 2"
msgstr "เซิร์ฟเวอร์ DNS"

#: network/netconnect.pm:1091
#, fuzzy, c-format
msgid "DNS server 3"
msgstr "เซิร์ฟเวอร์ DNS"

#: network/netconnect.pm:1092
#, fuzzy, c-format
msgid "Search domain"
msgstr "โดเมน NIS"

#: network/netconnect.pm:1093
#, c-format
msgid "By default search domain will be set from the fully-qualified host name"
msgstr ""

#: network/netconnect.pm:1094
#, c-format
msgid "Gateway (e.g. %s)"
msgstr ""

#: network/netconnect.pm:1096
#, c-format
msgid "Gateway device"
msgstr "อุปกรณ์เกตเวย์"

#: network/netconnect.pm:1105
#, fuzzy, c-format
msgid "DNS server address should be in format 1.2.3.4"
msgstr "ค่าของ IP ควรอยู่ในรูปแบบ 1.2.3.4"

#: network/netconnect.pm:1110 standalone/drakconnect:624
#, fuzzy, c-format
msgid "Gateway address should be in format 1.2.3.4"
msgstr "ค่าของ IP ควรอยู่ในรูปแบบ 1.2.3.4"

#: network/netconnect.pm:1121
#, c-format
msgid ""
"Enter a Zeroconf host name which will be the one that your machine will get "
"back to other machines on the network:"
msgstr ""

#: network/netconnect.pm:1122
#, fuzzy, c-format
msgid "Zeroconf Host name"
msgstr "ชื่อโฮสต์:"

#: network/netconnect.pm:1125
#, c-format
msgid "Zeroconf host name must not contain a ."
msgstr ""

#: network/netconnect.pm:1135
#, c-format
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""

#: network/netconnect.pm:1137
#, fuzzy, c-format
msgid "Internet connection"
msgstr "การเชื่อมต่อกับ Internet แบบ sharing"

#: network/netconnect.pm:1145
#, fuzzy, c-format
msgid "Configuration is complete, do you want to apply settings ?"
msgstr "XFree ชนิดใหนที่คุณต้องการมี"

#: network/netconnect.pm:1155
#, c-format
msgid "Do you want to start the connection at boot?"
msgstr "คุณต้องการต่อตอน boot หรือไม่"

#: network/netconnect.pm:1172
#, fuzzy, c-format
msgid "The network needs to be restarted. Do you want to restart it ?"
msgstr ""
"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
"คุณแน่ใจว่าจะไม่เลือกมันหรือ"

#: network/netconnect.pm:1179 network/netconnect.pm:1244
#, c-format
msgid "Network Configuration"
msgstr "การคอนฟิกระบบเน็ตเวิร์ก"

#: network/netconnect.pm:1180
#, fuzzy, c-format
msgid ""
"A problem occured while restarting the network: \n"
"\n"
"%s"
msgstr "คุณต้องการเริ่มทำงาน Network ใหม่หรือไม่"

#: network/netconnect.pm:1188
#, c-format
msgid "Do you want to try to connect to the Internet now?"
msgstr "คุณต้องการทดสอบต่อเข้า Internet เดี๋ยวนี้หรือไม่"

#: network/netconnect.pm:1196 standalone/drakconnect:978
#, c-format
msgid "Testing your connection..."
msgstr "ทดสอบ connection..."

#: network/netconnect.pm:1212
#, fuzzy, c-format
msgid "The system is now connected to the Internet."
msgstr "ติดต่อเข้า Internet เรียบร้อย"

#: network/netconnect.pm:1213
#, fuzzy, c-format
msgid "For security reasons, it will be disconnected now."
msgstr "เพื่อความปลอดภัย มันจะหยุดการติดต่อเดี๋ยวนี้"

#: network/netconnect.pm:1214
#, fuzzy, c-format
msgid ""
"The system doesn't seem to be connected to the Internet.\n"
"Try to reconfigure your connection."
msgstr ""
"ไม่สามารถต่อเข้า Internet \n"
"ลองทำการคอนฟิกใหม่อีกครั้ง"

#: network/netconnect.pm:1231
#, c-format
msgid ""
"After this is done, we recommend that you restart your X environment to "
"avoid any hostname-related problems."
msgstr ""
"เมื่อทุกอย่างเสร็จสิ้น ผมแนะนำให้ท่านเริ่มทำงาน X windows ใหม่\n"
"เพื่อป้องกันปัญหา hostname ที่อาจเกิดขึ้นได้"

#: network/netconnect.pm:1232
#, c-format
msgid ""
"Problems occured during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection doesn't "
"work, you might want to relaunch the configuration."
msgstr ""

#: network/netconnect.pm:1245
#, c-format
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""
"เนื่องจากคุณใช้การติดตั้งแบบ network ระบบ network จึงใช้ได้อยู่แล้ว\n"
"กด OK เพื่อรักษาค่าคอนฟิกเดิมไว้ หรือเลือก ยกเลิกเพื่อปรับแต่งใหม่\n"

#: network/netconnect.pm:1333
#, c-format
msgid ""
"An unexpected error has happened:\n"
"%s"
msgstr ""

#: network/network.pm:315
#, c-format
msgid "Proxies configuration"
msgstr "การคอนฟิก Proxies"

#: network/network.pm:316
#, c-format
msgid "HTTP proxy"
msgstr "HTTP proxy"

#: network/network.pm:317
#, c-format
msgid "FTP proxy"
msgstr "FTP proxy"

#: network/network.pm:320
#, c-format
msgid "Proxy should be http://..."
msgstr "ค่าของ Proxy ควรจะเป็น http://..."

#: network/network.pm:321
#, fuzzy, c-format
msgid "URL should begin with 'ftp:' or 'http:'"
msgstr "ค่าของ Proxy ควรจะเป็น http://..."

#: network/shorewall.pm:28
#, c-format
msgid "Firewalling configuration detected!"
msgstr "ตรวจพบคอนฟิกของ Firewall"

#: network/shorewall.pm:29
#, c-format
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fixes after installation."
msgstr ""

#: network/shorewall.pm:77 standalone/drakgw:218 standalone/drakvpn:214
#, c-format
msgid ""
"Please enter the name of the interface connected to the internet.\n"
"\n"
"Examples:\n"
"\t\tppp+ for modem or DSL connections, \n"
"\t\teth0, or eth1 for cable connection, \n"
"\t\tippp+ for a isdn connection.\n"
msgstr ""

#: network/tools.pm:165
#, fuzzy, c-format
msgid "Insert floppy"
msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"

#: network/tools.pm:166
#, fuzzy, c-format
msgid ""
"Insert a FAT formatted floppy in drive %s with %s in root directory and "
"press %s"
msgstr "ให้ใส่แผ่นฟล้อปปี้ที่ format แบบ FAT ลงในไดรว์ %s"

#: network/tools.pm:167
#, fuzzy, c-format
msgid "Floppy access error, unable to mount device %s"
msgstr "คุณต้องการเม้าท์อุปกรณ์ %s ไว้ที่ใด?"

#: partition_table.pm:645
#, c-format
msgid "mount failed: "
msgstr "การเม้าท์ล้มเหลว: "

#: partition_table.pm:750
#, c-format
msgid "Extended partition not supported on this platform"
msgstr "Extended partition not supported on this platform"

#: partition_table.pm:768
#, c-format
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions."
msgstr ""
"คุณมีช่องว่างในตารางพาร์ติชั่น  แต่โปรแกรมจะไม่ใช้งานช่องว่างนั้น\n"
"การแก้ไขปัญหาสามารถทำได้โดยย้ายไพรมารีพาร์ติชั่น เพื่อให้ช่องว่าไปต่อท้ายพาร์ติชั่นแบบ extended"

#: partition_table.pm:855
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "การกู้คืนจากไฟล์ %s ล้มเหลว: %s"

#: partition_table.pm:857
#, c-format
msgid "Bad backup file"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: partition_table.pm:877
#, c-format
msgid "Error writing to file %s"
msgstr "ข้อผิดพลาดถูกบันทึกในไฟล์ %s"

#: partition_table/raw.pm:187
#, fuzzy, c-format
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random, corrupted "
"data."
msgstr ""
"มีสิ่งไม่ดีเกิดขึ้นกับ disk ของคุณซึ่งเราไม่สามารถตรวจ\n"
"สอบความถูกต้องของข้อมูลได้\n"
"นั่นหมายความว่าการเขียนข้อมูลลงไปอาจกลายเป็นขยะ"

#: pkgs.pm:24
#, c-format
msgid "must have"
msgstr "ต้องมี"

#: pkgs.pm:25
#, c-format
msgid "important"
msgstr "สำคัญ"

#: pkgs.pm:26
#, c-format
msgid "very nice"
msgstr "ดีมาก"

#: pkgs.pm:27
#, c-format
msgid "nice"
msgstr "ดี"

#: pkgs.pm:28
#, c-format
msgid "maybe"
msgstr "อาจจะ"

#: printer/cups.pm:103
#, fuzzy, c-format
msgid "(on %s)"
msgstr "(โมดูล %s)"

#: printer/cups.pm:103
#, c-format
msgid "(on this machine)"
msgstr ""

#: printer/cups.pm:115 standalone/printerdrake:197
#, fuzzy, c-format
msgid "Configured on other machines"
msgstr "ปรับแต่งการบริการต่างๆ"

#: printer/cups.pm:117
#, fuzzy, c-format
msgid "On CUPS server \"%s\""
msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"

#: printer/cups.pm:117 printer/printerdrake.pm:3989
#: printer/printerdrake.pm:3998 printer/printerdrake.pm:4139
#: printer/printerdrake.pm:4150 printer/printerdrake.pm:4362
#, c-format
msgid " (Default)"
msgstr " (Default)"

#: printer/data.pm:22
#, c-format
msgid "PDQ - Print, Don't Queue"
msgstr ""

#: printer/data.pm:23
#, c-format
msgid "PDQ"
msgstr ""

#: printer/data.pm:34
#, c-format
msgid "LPD - Line Printer Daemon"
msgstr ""

#: printer/data.pm:35
#, c-format
msgid "LPD"
msgstr ""

#: printer/data.pm:56
#, c-format
msgid "LPRng - LPR New Generation"
msgstr ""

#: printer/data.pm:57
#, c-format
msgid "LPRng"
msgstr ""

#: printer/data.pm:82
#, c-format
msgid "CUPS - Common Unix Printing System"
msgstr ""

#: printer/detect.pm:149 printer/detect.pm:227 printer/detect.pm:429
#: printer/detect.pm:466 printer/printerdrake.pm:686
#, c-format
msgid "Unknown Model"
msgstr ""

#: printer/main.pm:29
#, c-format
msgid "Local printer"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: printer/main.pm:30
#, c-format
msgid "Remote printer"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: printer/main.pm:31
#, fuzzy, c-format
msgid "Printer on remote CUPS server"
msgstr "Remote CUPS server"

#: printer/main.pm:32 printer/printerdrake.pm:1406
#, fuzzy, c-format
msgid "Printer on remote lpd server"
msgstr "รีโมต lpd"

#: printer/main.pm:33
#, c-format
msgid "Network printer (TCP/Socket)"
msgstr "เครื่องพิมพ์ในระบบ Network (TCP/Socket)"

#: printer/main.pm:34
#, fuzzy, c-format
msgid "Printer on SMB/Windows 95/98/NT server"
msgstr "SMB/วินโดวส์ 95/98/NT"

#: printer/main.pm:35
#, fuzzy, c-format
msgid "Printer on NetWare server"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: printer/main.pm:36 printer/printerdrake.pm:1410
#, fuzzy, c-format
msgid "Enter a printer device URI"
msgstr "อุปกรณ์เครื่องพิมพ์ URI"

#: printer/main.pm:37
#, c-format
msgid "Pipe job into a command"
msgstr ""

#: printer/main.pm:307 printer/main.pm:575 printer/main.pm:1545
#: printer/main.pm:2229 printer/main.pm:2240 printer/printerdrake.pm:1866
#: printer/printerdrake.pm:4396
#, c-format
msgid "Unknown model"
msgstr ""

#: printer/main.pm:332 standalone/printerdrake:196
#, fuzzy, c-format
msgid "Configured on this machine"
msgstr "คอนฟิกเม้าส์"

#: printer/main.pm:338 printer/printerdrake.pm:963
#, c-format
msgid " on parallel port #%s"
msgstr ""

#: printer/main.pm:341 printer/printerdrake.pm:965
#, c-format
msgid ", USB printer #%s"
msgstr ""

#: printer/main.pm:343
#, fuzzy, c-format
msgid ", USB printer"
msgstr "ไม่มีเครื่องพิมพ์"

#: printer/main.pm:348
#, c-format
msgid ", multi-function device on parallel port #%s"
msgstr ""

#: printer/main.pm:351
#, fuzzy, c-format
msgid ", multi-function device on a parallel port"
msgstr "ชื่อของเครื่องพิมพ์"

#: printer/main.pm:353
#, c-format
msgid ", multi-function device on USB"
msgstr ""

#: printer/main.pm:355
#, c-format
msgid ", multi-function device on HP JetDirect"
msgstr ""

#: printer/main.pm:357
#, c-format
msgid ", multi-function device"
msgstr ""

#: printer/main.pm:360
#, fuzzy, c-format
msgid ", printing to %s"
msgstr "ข้อผิดพลาดถูกบันทึกในไฟล์ %s"

#: printer/main.pm:362
#, c-format
msgid " on LPD server \"%s\", printer \"%s\""
msgstr ""

#: printer/main.pm:364
#, c-format
msgid ", TCP/IP host \"%s\", port %s"
msgstr ""

#: printer/main.pm:368
#, c-format
msgid " on SMB/Windows server \"%s\", share \"%s\""
msgstr ""

#: printer/main.pm:372
#, c-format
msgid " on Novell server \"%s\", printer \"%s\""
msgstr ""

#: printer/main.pm:374
#, c-format
msgid ", using command %s"
msgstr ""

#: printer/main.pm:389
#, fuzzy, c-format
msgid "Parallel port #%s"
msgstr "ชื่อของเครื่องพิมพ์"

#: printer/main.pm:392 printer/printerdrake.pm:979
#: printer/printerdrake.pm:1002 printer/printerdrake.pm:1020
#, fuzzy, c-format
msgid "USB printer #%s"
msgstr "ไม่มีเครื่องพิมพ์"

#: printer/main.pm:394
#, fuzzy, c-format
msgid "USB printer"
msgstr "ไม่มีเครื่องพิมพ์"

#: printer/main.pm:399
#, fuzzy, c-format
msgid "Multi-function device on parallel port #%s"
msgstr "ชื่อของเครื่องพิมพ์"

#: printer/main.pm:402
#, fuzzy, c-format
msgid "Multi-function device on a parallel port"
msgstr "ชื่อของเครื่องพิมพ์"

#: printer/main.pm:404
#, c-format
msgid "Multi-function device on USB"
msgstr ""

#: printer/main.pm:406
#, c-format
msgid "Multi-function device on HP JetDirect"
msgstr ""

#: printer/main.pm:408
#, c-format
msgid "Multi-function device"
msgstr ""

#: printer/main.pm:411
#, fuzzy, c-format
msgid "Prints into %s"
msgstr "ข้อผิดพลาดถูกบันทึกในไฟล์ %s"

#: printer/main.pm:413
#, fuzzy, c-format
msgid "LPD server \"%s\", printer \"%s\""
msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"

#: printer/main.pm:415
#, c-format
msgid "TCP/IP host \"%s\", port %s"
msgstr ""

#: printer/main.pm:419
#, fuzzy, c-format
msgid "SMB/Windows server \"%s\", share \"%s\""
msgstr "SMB/วินโดวส์ 95/98/NT"

#: printer/main.pm:423
#, fuzzy, c-format
msgid "Novell server \"%s\", printer \"%s\""
msgstr "เครื่องพิมพ์ในระบบ Network (TCP/Socket)"

#: printer/main.pm:425
#, fuzzy, c-format
msgid "Uses command %s"
msgstr "Port"

#: printer/main.pm:427
#, c-format
msgid "URI: %s"
msgstr ""

#: printer/main.pm:572 printer/printerdrake.pm:732
#: printer/printerdrake.pm:2463
#, c-format
msgid "Raw printer (No driver)"
msgstr ""

#: printer/main.pm:1086 printer/printerdrake.pm:179
#: printer/printerdrake.pm:191
#, fuzzy, c-format
msgid "Local network(s)"
msgstr "ไม่พบการ์ดเน็ตเวิร์ก"

#: printer/main.pm:1088 printer/printerdrake.pm:195
#, fuzzy, c-format
msgid "Interface \"%s\""
msgstr "Interface %s"

#: printer/main.pm:1090
#, fuzzy, c-format
msgid "Network %s"
msgstr "Network interface"

#: printer/main.pm:1092
#, fuzzy, c-format
msgid "Host %s"
msgstr "ชื่อโฮสต์:"

#: printer/main.pm:1121
#, fuzzy, c-format
msgid "%s (Port %s)"
msgstr "Port"

#: printer/printerdrake.pm:22
#, c-format
msgid ""
"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
"on. Download the Windows driver package from the HP web site (the firmware "
"on the printer's CD does not work) and extract the firmware file from it by "
"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
"printer' directory. There it will be found by the automatic uploader script "
"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""

#: printer/printerdrake.pm:62
#, fuzzy, c-format
msgid "CUPS printer configuration"
msgstr "การคอนฟิก Internet"

#: printer/printerdrake.pm:63
#, c-format
msgid ""
"Here you can choose whether the printers connected to this machine should be "
"accessible by remote machines and by which remote machines."
msgstr ""

#: printer/printerdrake.pm:64
#, c-format
msgid ""
"You can also decide here whether printers on remote machines should be "
"automatically made available on this machine."
msgstr ""

#: printer/printerdrake.pm:67
#, c-format
msgid "The printers on this machine are available to other computers"
msgstr ""

#: printer/printerdrake.pm:69
#, c-format
msgid "Automatically find available printers on remote machines"
msgstr ""

#: printer/printerdrake.pm:71
#, fuzzy, c-format
msgid "Printer sharing on hosts/networks: "
msgstr "เครื่องพิมพ์"

#: printer/printerdrake.pm:73
#, fuzzy, c-format
msgid "Custom configuration"
msgstr "การคอนฟิก"

#: printer/printerdrake.pm:78 standalone/scannerdrake:566
#: standalone/scannerdrake:583
#, fuzzy, c-format
msgid "No remote machines"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: printer/printerdrake.pm:88
#, fuzzy, c-format
msgid "Additional CUPS servers: "
msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"

#: printer/printerdrake.pm:93
#, fuzzy, c-format
msgid "None"
msgstr "ทำเรียบร้อยแล้ว"

#: printer/printerdrake.pm:95
#, c-format
msgid ""
"To get access to printers on remote CUPS servers in your local network you "
"only need to turn on the \"Automatically find available printers on remote "
"machines\" option; the CUPS servers inform your machine automatically about "
"their printers. All printers currently known to your machine are listed in "
"the \"Remote printers\" section in the main window of Printerdrake. If your "
"CUPS server(s) is/are not in your local network, you have to enter the IP "
"address(es) and optionally the port number(s) here to get the printer "
"information from the server(s)."
msgstr ""

#: printer/printerdrake.pm:100
#, fuzzy, c-format
msgid "Japanese text printing mode"
msgstr "คอนฟิกระบบเน็ตเวิร์ก"

#: printer/printerdrake.pm:101
#, c-format
msgid ""
"Turning on this allows to print plain text files in japanese language. Only "
"use this function if you really want to print text in japanese, if it is "
"activated you cannot print accentuated characters in latin fonts any more "
"and you will not be able to adjust the margins, the character size, etc. "
"This setting only affects printers defined on this machine. If you want to "
"print japanese text on a printer set up on a remote machine, you have to "
"activate this function on that remote machine."
msgstr ""

#: printer/printerdrake.pm:105
#, fuzzy, c-format
msgid "Automatic correction of CUPS configuration"
msgstr "Boot Style Configuration"

#: printer/printerdrake.pm:107
#, c-format
msgid ""
"When this option is turned on, on every startup of CUPS it is automatically "
"made sure that\n"
"\n"
"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
"- when printer information is broadcasted, it does not contain \"localhost\" "
"as the server name.\n"
"\n"
"If some of these measures lead to problems for you, turn this option off, "
"but then you have to take care of these points."
msgstr ""

#: printer/printerdrake.pm:129 printer/printerdrake.pm:205
#, fuzzy, c-format
msgid "Sharing of local printers"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: printer/printerdrake.pm:130
#, c-format
msgid ""
"These are the machines and networks on which the locally connected printer"
"(s) should be available:"
msgstr ""

#: printer/printerdrake.pm:141
#, c-format
msgid "Add host/network"
msgstr ""

#: printer/printerdrake.pm:147
#, c-format
msgid "Edit selected host/network"
msgstr ""

#: printer/printerdrake.pm:156
#, fuzzy, c-format
msgid "Remove selected host/network"
msgstr "ลบคิว"

#: printer/printerdrake.pm:187 printer/printerdrake.pm:197
#: printer/printerdrake.pm:210 printer/printerdrake.pm:217
#: printer/printerdrake.pm:248 printer/printerdrake.pm:266
#, c-format
msgid "IP address of host/network:"
msgstr ""

#: printer/printerdrake.pm:206
#, c-format
msgid ""
"Choose the network or host on which the local printers should be made "
"available:"
msgstr ""

#: printer/printerdrake.pm:213
#, c-format
msgid "Host/network IP address missing."
msgstr ""

#: printer/printerdrake.pm:221
#, c-format
msgid "The entered host/network IP is not correct.\n"
msgstr ""

#: printer/printerdrake.pm:222 printer/printerdrake.pm:400
#, c-format
msgid "Examples for correct IPs:\n"
msgstr ""

#: printer/printerdrake.pm:246
#, c-format
msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""

#: printer/printerdrake.pm:316 printer/printerdrake.pm:387
#, fuzzy, c-format
msgid "Accessing printers on remote CUPS servers"
msgstr "Remote CUPS server"

#: printer/printerdrake.pm:317
#, c-format
msgid ""
"Add here the CUPS servers whose printers you want to use. You only need to "
"do this if the servers do not broadcast their printer information into the "
"local network."
msgstr ""

#: printer/printerdrake.pm:328
#, fuzzy, c-format
msgid "Add server"
msgstr "เพิ่มผู้ใช้"

#: printer/printerdrake.pm:334
#, fuzzy, c-format
msgid "Edit selected server"
msgstr "ค้นพบ %s"

#: printer/printerdrake.pm:343
#, fuzzy, c-format
msgid "Remove selected server"
msgstr "ลบคิว"

#: printer/printerdrake.pm:388
#, c-format
msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""

#: printer/printerdrake.pm:389
#, c-format
msgid "If no port is given, 631 will be taken as default."
msgstr ""

#: printer/printerdrake.pm:393
#, fuzzy, c-format
msgid "Server IP missing!"
msgstr "ชื่อของเครื่องพิมพ์"

#: printer/printerdrake.pm:399
#, fuzzy, c-format
msgid "The entered IP is not correct.\n"
msgstr "ถูกต้องหรือไม่?"

#: printer/printerdrake.pm:411 printer/printerdrake.pm:1629
#, fuzzy, c-format
msgid "The port number should be an integer!"
msgstr "Port number ควรเป็นตัวเลข"

#: printer/printerdrake.pm:422
#, c-format
msgid "This server is already in the list, it cannot be added again.\n"
msgstr ""

#: printer/printerdrake.pm:433 printer/printerdrake.pm:1650
#: standalone/drakups:233 standalone/harddrake2:68
#, c-format
msgid "Port"
msgstr "Port"

#: printer/printerdrake.pm:478 printer/printerdrake.pm:545
#: printer/printerdrake.pm:610 printer/printerdrake.pm:628
#: printer/printerdrake.pm:711 printer/printerdrake.pm:768
#: printer/printerdrake.pm:794 printer/printerdrake.pm:1703
#: printer/printerdrake.pm:1886 printer/printerdrake.pm:1902
#: printer/printerdrake.pm:1945 printer/printerdrake.pm:1982
#: printer/printerdrake.pm:2024 printer/printerdrake.pm:2061
#: printer/printerdrake.pm:2071 printer/printerdrake.pm:2314
#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2458
#: printer/printerdrake.pm:2568 printer/printerdrake.pm:3069
#: printer/printerdrake.pm:3134 printer/printerdrake.pm:3177
#: printer/printerdrake.pm:3180 printer/printerdrake.pm:3299
#: printer/printerdrake.pm:3364 printer/printerdrake.pm:3436
#: printer/printerdrake.pm:3457 printer/printerdrake.pm:3466
#: printer/printerdrake.pm:3557 printer/printerdrake.pm:3655
#: printer/printerdrake.pm:3661 printer/printerdrake.pm:3674
#: printer/printerdrake.pm:3726 printer/printerdrake.pm:3766
#: printer/printerdrake.pm:3778 printer/printerdrake.pm:3789
#: printer/printerdrake.pm:3798 printer/printerdrake.pm:3811
#: printer/printerdrake.pm:3888 printer/printerdrake.pm:3945
#: printer/printerdrake.pm:4010 printer/printerdrake.pm:4270
#: printer/printerdrake.pm:4313 printer/printerdrake.pm:4459
#: printer/printerdrake.pm:4517 printer/printerdrake.pm:4546
#: standalone/printerdrake:65 standalone/printerdrake:85
#: standalone/printerdrake:522
#, fuzzy, c-format
msgid "Printerdrake"
msgstr "เครื่องพิมพ์"

#: printer/printerdrake.pm:479
#, fuzzy, c-format
msgid "Restarting CUPS..."
msgstr "จำเพาะ"

#: printer/printerdrake.pm:502
#, c-format
msgid "Select Printer Connection"
msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"

#: printer/printerdrake.pm:503
#, c-format
msgid "How is the printer connected?"
msgstr "เครื่องพิมพ์เชื่อมต่ออย่างไร?"

#: printer/printerdrake.pm:505
#, fuzzy, c-format
msgid ""
"\n"
"Printers on remote CUPS servers do not need to be configured here; these "
"printers will be automatically detected."
msgstr ""
"เวลาใช้ CUPS SERVER คุณไม่จำเป็นต้องปรับแต่งเครื่องพิมพ์\n"
"ในตอนนี้  เครื่องพิมพ์จะถูกค้นหาเอง\n"
"กรณีมีข้อสงสัย กรุณาเลือก \"Remote CUPS server\""

#: printer/printerdrake.pm:508 printer/printerdrake.pm:4012
#, c-format
msgid ""
"\n"
"WARNING: No local network connection active, remote printers can neither be "
"detected nor tested!"
msgstr ""

#: printer/printerdrake.pm:515
#, c-format
msgid ""
"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
msgstr ""

#: printer/printerdrake.pm:545
#, fuzzy, c-format
msgid "Checking your system..."
msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"

#: printer/printerdrake.pm:561
#, fuzzy, c-format
msgid "and one unknown printer"
msgstr "ไม่มีเครื่องพิมพ์"

#: printer/printerdrake.pm:563
#, fuzzy, c-format
msgid "and %d unknown printers"
msgstr "ไม่มีเครื่องพิมพ์"

#: printer/printerdrake.pm:567
#, fuzzy, c-format
msgid ""
"The following printers\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"

#: printer/printerdrake.pm:569
#, fuzzy, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"

#: printer/printerdrake.pm:570
#, fuzzy, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"is directly connected to your system"
msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"

#: printer/printerdrake.pm:574
#, c-format
msgid ""
"\n"
"There is one unknown printer directly connected to your system"
msgstr ""

#: printer/printerdrake.pm:575
#, c-format
msgid ""
"\n"
"There are %d unknown printers directly connected to your system"
msgstr ""

#: printer/printerdrake.pm:578
#, c-format
msgid ""
"There are no printers found which are directly connected to your machine"
msgstr ""

#: printer/printerdrake.pm:581
#, fuzzy, c-format
msgid " (Make sure that all your printers are connected and turned on).\n"
msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"

#: printer/printerdrake.pm:594
#, c-format
msgid ""
"Do you want to enable printing on the printers mentioned above or on "
"printers in the local network?\n"
msgstr ""

#: printer/printerdrake.pm:595
#, fuzzy, c-format
msgid "Do you want to enable printing on printers in the local network?\n"
msgstr "คุณต้องการพิมพ์ทดสอบหรือไม่?"

#: printer/printerdrake.pm:597
#, fuzzy, c-format
msgid "Do you want to enable printing on the printers mentioned above?\n"
msgstr "คุณต้องการต่อตอน boot หรือไม่"

#: printer/printerdrake.pm:598
#, c-format
msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr ""

#: printer/printerdrake.pm:599
#, c-format
msgid ""
"NOTE: Depending on the printer model and the printing system up to %d MB of "
"additional software will be installed."
msgstr ""

#: printer/printerdrake.pm:629
#, fuzzy, c-format
msgid "Searching for new printers..."
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: printer/printerdrake.pm:713
#, fuzzy, c-format
msgid "Configuring printer ..."
msgstr "การคอนฟิกเครื่องพิมพ์"

#: printer/printerdrake.pm:714 printer/printerdrake.pm:769
#: printer/printerdrake.pm:3790
#, fuzzy, c-format
msgid "Configuring printer \"%s\"..."
msgstr "การคอนฟิกเครื่องพิมพ์"

#: printer/printerdrake.pm:734
#, c-format
msgid "("
msgstr ""

#: printer/printerdrake.pm:735
#, c-format
msgid " on "
msgstr ""

#: printer/printerdrake.pm:736 standalone/scannerdrake:136
#, c-format
msgid ")"
msgstr ""

#: printer/printerdrake.pm:741 printer/printerdrake.pm:2470
#, fuzzy, c-format
msgid "Printer model selection"
msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"

#: printer/printerdrake.pm:742 printer/printerdrake.pm:2471
#, fuzzy, c-format
msgid "Which printer model do you have?"
msgstr "คุณมีเครื่องพิมพ์ชนิดใด?"

#: printer/printerdrake.pm:743
#, c-format
msgid ""
"\n"
"\n"
"Printerdrake could not determine which model your printer %s is. Please "
"choose the correct model from the list."
msgstr ""

#: printer/printerdrake.pm:746 printer/printerdrake.pm:2476
#, c-format
msgid ""
"If your printer is not listed, choose a compatible (see printer manual) or a "
"similar one."
msgstr ""

#: printer/printerdrake.pm:795 printer/printerdrake.pm:3779
#: printer/printerdrake.pm:3946 printer/printerdrake.pm:4271
#: printer/printerdrake.pm:4314 printer/printerdrake.pm:4518
#, fuzzy, c-format
msgid "Configuring applications..."
msgstr "การคอนฟิกเครื่องพิมพ์"

#: printer/printerdrake.pm:831 printer/printerdrake.pm:843
#: printer/printerdrake.pm:901 printer/printerdrake.pm:1872
#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4211
#, fuzzy, c-format
msgid "Add a new printer"
msgstr "ไม่มีเครื่องพิมพ์"

#: printer/printerdrake.pm:832
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard allows you to install local or remote printers to be used from "
"this machine and also from other machines in the network.\n"
"\n"
"It asks you for all necessary information to set up the printer and gives "
"you access to all available printer drivers, driver options, and printer "
"connection types."
msgstr ""

#: printer/printerdrake.pm:845
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer, connected directly to the network or to a remote Windows machine.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected. Also your network printer(s) and your Windows "
"machines must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network and/or Windows-hosted printers when you don't need "
"it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:854
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:862
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer or connected directly to the network.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network printers when you don't need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:871
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:880
#, fuzzy, c-format
msgid "Auto-detect printers connected to this machine"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: printer/printerdrake.pm:883
#, c-format
msgid "Auto-detect printers connected directly to the local network"
msgstr ""

#: printer/printerdrake.pm:886
#, c-format
msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""

#: printer/printerdrake.pm:902
#, c-format
msgid ""
"\n"
"Congratulations, your printer is now installed and configured!\n"
"\n"
"You can print using the \"Print\" command of your application (usually in "
"the \"File\" menu).\n"
"\n"
"If you want to add, remove, or rename a printer, or if you want to change "
"the default option settings (paper input tray, printout quality, ...), "
"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
msgstr ""

#: printer/printerdrake.pm:937 printer/printerdrake.pm:1152
#: printer/printerdrake.pm:1214 printer/printerdrake.pm:1304
#: printer/printerdrake.pm:1441 printer/printerdrake.pm:1516
#: printer/printerdrake.pm:1667 printer/printerdrake.pm:1750
#: printer/printerdrake.pm:1759 printer/printerdrake.pm:1768
#: printer/printerdrake.pm:1779 printer/printerdrake.pm:1892
#: printer/printerdrake.pm:1954 printer/printerdrake.pm:1988
#, fuzzy, c-format
msgid "Could not install the %s packages!"
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: printer/printerdrake.pm:939
#, c-format
msgid "Skipping Windows/SMB server auto-detection"
msgstr ""

#: printer/printerdrake.pm:945 printer/printerdrake.pm:1075
#: printer/printerdrake.pm:1310 printer/printerdrake.pm:1563
#, fuzzy, c-format
msgid "Printer auto-detection"
msgstr "ใช้ auto detection"

#: printer/printerdrake.pm:945
#, c-format
msgid "Detecting devices..."
msgstr "กำลังตรวจสอบอุปกรณ์..."

#: printer/printerdrake.pm:967
#, c-format
msgid ", network printer \"%s\", port %s"
msgstr ""

#: printer/printerdrake.pm:969
#, fuzzy, c-format
msgid ", printer \"%s\" on SMB/Windows server \"%s\""
msgstr "SMB/วินโดวส์ 95/98/NT"

#: printer/printerdrake.pm:973
#, fuzzy, c-format
msgid "Detected %s"
msgstr "ค้นพบ %s"

#: printer/printerdrake.pm:977 printer/printerdrake.pm:1000
#: printer/printerdrake.pm:1017
#, fuzzy, c-format
msgid "Printer on parallel port #%s"
msgstr "ชื่อของเครื่องพิมพ์"

#: printer/printerdrake.pm:981
#, fuzzy, c-format
msgid "Network printer \"%s\", port %s"
msgstr "เครื่องพิมพ์ในระบบ Network (TCP/Socket)"

#: printer/printerdrake.pm:983
#, fuzzy, c-format
msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr "SMB/วินโดวส์ 95/98/NT"

#: printer/printerdrake.pm:1062
#, fuzzy, c-format
msgid "Local Printer"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: printer/printerdrake.pm:1063
#, c-format
msgid ""
"No local printer found! To manually install a printer enter a device name/"
"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
"printer: /dev/usb/lp1, ...)."
msgstr ""

#: printer/printerdrake.pm:1067
#, fuzzy, c-format
msgid "You must enter a device or file name!"
msgstr "อุปกรณ์เครื่องพิมพ์ URI"

#: printer/printerdrake.pm:1076
#, fuzzy, c-format
msgid "No printer found!"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: printer/printerdrake.pm:1084
#, fuzzy, c-format
msgid "Local Printers"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: printer/printerdrake.pm:1085
#, fuzzy, c-format
msgid "Available printers"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: printer/printerdrake.pm:1089 printer/printerdrake.pm:1098
#, fuzzy, c-format
msgid "The following printer was auto-detected. "
msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกลบ"

#: printer/printerdrake.pm:1091
#, c-format
msgid ""
"If it is not the one you want to configure, enter a device name/file name in "
"the input line"
msgstr ""

#: printer/printerdrake.pm:1092
#, c-format
msgid ""
"Alternatively, you can specify a device name/file name in the input line"
msgstr ""

#: printer/printerdrake.pm:1093 printer/printerdrake.pm:1102
#, c-format
msgid "Here is a list of all auto-detected printers. "
msgstr ""

#: printer/printerdrake.pm:1095
#, c-format
msgid ""
"Please choose the printer you want to set up or enter a device name/file "
"name in the input line"
msgstr ""

#: printer/printerdrake.pm:1096
#, c-format
msgid ""
"Please choose the printer to which the print jobs should go or enter a "
"device name/file name in the input line"
msgstr ""

#: printer/printerdrake.pm:1100
#, c-format
msgid ""
"The configuration of the printer will work fully automatically. If your "
"printer was not correctly detected or if you prefer a customized printer "
"configuration, turn on \"Manual configuration\"."
msgstr ""

#: printer/printerdrake.pm:1101
#, c-format
msgid "Currently, no alternative possibility is available"
msgstr ""

#: printer/printerdrake.pm:1104
#, c-format
msgid ""
"Please choose the printer you want to set up. The configuration of the "
"printer will work fully automatically. If your printer was not correctly "
"detected or if you prefer a customized printer configuration, turn on "
"\"Manual configuration\"."
msgstr ""

#: printer/printerdrake.pm:1105
#, fuzzy, c-format
msgid "Please choose the printer to which the print jobs should go."
msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"

#: printer/printerdrake.pm:1107
#, c-format
msgid ""
"Please choose the port that your printer is connected to or enter a device "
"name/file name in the input line"
msgstr ""

#: printer/printerdrake.pm:1108
#, fuzzy, c-format
msgid "Please choose the port that your printer is connected to."
msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"

#: printer/printerdrake.pm:1110
#, c-format
msgid ""
" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""

#: printer/printerdrake.pm:1114
#, fuzzy, c-format
msgid "You must choose/enter a printer/device!"
msgstr "อุปกรณ์เครื่องพิมพ์ URI"

#: printer/printerdrake.pm:1154 printer/printerdrake.pm:1216
#: printer/printerdrake.pm:1306 printer/printerdrake.pm:1443
#: printer/printerdrake.pm:1518 printer/printerdrake.pm:1669
#: printer/printerdrake.pm:1752 printer/printerdrake.pm:1761
#: printer/printerdrake.pm:1770 printer/printerdrake.pm:1781
#, fuzzy, c-format
msgid "Aborting"
msgstr "เลิก"

#: printer/printerdrake.pm:1189
#, c-format
msgid "Remote lpd Printer Options"
msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"

#: printer/printerdrake.pm:1190
#, fuzzy, c-format
msgid ""
"To use a remote lpd printer, you need to supply the hostname of the printer "
"server and the printer name on that server."
msgstr ""
"หากคุณต้องการใช้คิวเครื่องพิมพ์แบบรีโมท คุณจะต้องป้อนข้อมูล\n"
"ของชื่อโฮสต์ที่ให้บริการเครื่องพิมพ์นั้น และชื่อคิวของเซิร์ฟเวอร์นั้น\n"
"ซึ่งเป็นที่ๆงานพิมพ์จะถูกเก็บไว้"

#: printer/printerdrake.pm:1191
#, fuzzy, c-format
msgid "Remote host name"
msgstr "ชื่อโฮสต์รีโมท"

#: printer/printerdrake.pm:1192
#, fuzzy, c-format
msgid "Remote printer name"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: printer/printerdrake.pm:1195
#, fuzzy, c-format
msgid "Remote host name missing!"
msgstr "ชื่อโฮสต์รีโมท"

#: printer/printerdrake.pm:1199
#, fuzzy, c-format
msgid "Remote printer name missing!"
msgstr "ชื่อโฮสต์รีโมท"

#: printer/printerdrake.pm:1228 printer/printerdrake.pm:1799
#: standalone/drakTermServ:454 standalone/drakTermServ:753
#: standalone/drakTermServ:769 standalone/drakTermServ:1432
#: standalone/drakTermServ:1440 standalone/drakTermServ:1451
#: standalone/drakbackup:512 standalone/drakbackup:618
#: standalone/drakbackup:653 standalone/drakbackup:771
#: standalone/harddrake2:166
#, fuzzy, c-format
msgid "Information"
msgstr "แสดงข้อมูล"

#: printer/printerdrake.pm:1228 printer/printerdrake.pm:1799
#, fuzzy, c-format
msgid "Detected model: %s %s"
msgstr "ค้นพบ %s"

#: printer/printerdrake.pm:1310 printer/printerdrake.pm:1563
#, fuzzy, c-format
msgid "Scanning network..."
msgstr "ทดสอบ connection..."

#: printer/printerdrake.pm:1321 printer/printerdrake.pm:1342
#, c-format
msgid ", printer \"%s\" on server \"%s\""
msgstr ""

#: printer/printerdrake.pm:1324 printer/printerdrake.pm:1345
#, fuzzy, c-format
msgid "Printer \"%s\" on server \"%s\""
msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"

#: printer/printerdrake.pm:1366
#, c-format
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบ SMB (เครื่องพิมพ์ในระบบวินโดวส์ 9x/NT)"

#: printer/printerdrake.pm:1367
#, fuzzy, c-format
msgid ""
"To print to a SMB printer, you need to provide the SMB host name (Note! It "
"may be different from its TCP/IP hostname!) and possibly the IP address of "
"the print server, as well as the share name for the printer you wish to "
"access and any applicable user name, password, and workgroup information."
msgstr ""
"เพื่อให้คุณสามารถใช้เครื่องพิมพ์ SMB ได้ คุณจะต้องใส่ข้อมูลของชื่อโฮสต์ที่\n"
"เป็น SMB (โปรดสังเกตุว่า ชื่อโฮสต์แบบ SMB อาจแตกต่างจากชื่อโฮสต์\n"
"แบบ TCP/IP) และข้อมูลค่า IP แอดเดรสของพรินต์เซิร์ฟเวอร์ รวมทั้ง\n"
"ชื่อของเครื่องพิมพ์ที่ต้องการใช้ (share name) และชื่อของผู้ใช้ (username)\n"
"รหัสผ่าน (password) และข้อมูลของเวิร์คกรุ๊ป (workgroup) ด้วย"

#: printer/printerdrake.pm:1368
#, c-format
msgid ""
" If the desired printer was auto-detected, simply choose it from the list "
"and then add user name, password, and/or workgroup if needed."
msgstr ""

#: printer/printerdrake.pm:1370
#, c-format
msgid "SMB server host"
msgstr "ชื่อโฮสต์ของ SMB server"

#: printer/printerdrake.pm:1371
#, c-format
msgid "SMB server IP"
msgstr "ค่า IP ของ SMB เซิร์ฟเวอร์"

#: printer/printerdrake.pm:1372
#, c-format
msgid "Share name"
msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"

#: printer/printerdrake.pm:1375
#, c-format
msgid "Workgroup"
msgstr "เวิร์กกรุ๊ป (workgroup)"

#: printer/printerdrake.pm:1377
#, fuzzy, c-format
msgid "Auto-detected"
msgstr "ใช้ auto detection"

#: printer/printerdrake.pm:1387
#, c-format
msgid "Either the server name or the server's IP must be given!"
msgstr ""

#: printer/printerdrake.pm:1391
#, c-format
msgid "Samba share name missing!"
msgstr ""

#: printer/printerdrake.pm:1397
#, c-format
msgid "SECURITY WARNING!"
msgstr ""

#: printer/printerdrake.pm:1398
#, c-format
msgid ""
"You are about to set up printing to a Windows account with password. Due to "
"a fault in the architecture of the Samba client software the password is put "
"in clear text into the command line of the Samba client used to transmit the "
"print job to the Windows server. So it is possible for every user on this "
"machine to display the password on the screen by issuing commands as \"ps "
"auxwww\".\n"
"\n"
"We recommend to make use of one of the following alternatives (in all cases "
"you have to make sure that only machines from your local network have access "
"to your Windows server, for example by means of a firewall):\n"
"\n"
"Use a password-less account on your Windows server, as the \"GUEST\" account "
"or a special account dedicated for printing. Do not remove the password "
"protection from a personal account or the administrator account.\n"
"\n"
"Set up your Windows server to make the printer available under the LPD "
"protocol. Then set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:1408
#, c-format
msgid ""
"Set up your Windows server to make the printer available under the IPP "
"protocol and set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:1411
#, c-format
msgid ""
"Connect your printer to a Linux server and let your Windows machine(s) "
"connect to it as a client.\n"
"\n"
"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""

#: printer/printerdrake.pm:1489
#, c-format
msgid "NetWare Printer Options"
msgstr "อ๊อปชั่นของเครื่องพิมพ์ในระบบเน็ตแวร์"

#: printer/printerdrake.pm:1490
#, fuzzy, c-format
msgid ""
"To print on a NetWare printer, you need to provide the NetWare print server "
"name (Note! it may be different from its TCP/IP hostname!) as well as the "
"print queue name for the printer you wish to access and any applicable user "
"name and password."
msgstr ""
"เพื่อให้คุณสามารถใช้เครื่องพิมพ์ในระบบเน็ตแวร์ คุณจะต้องป้อนข้อมูล\n"
"ของชื่อพรินต์เซิร์ฟเวอร์ในระบบเน็ตแวร์ (ชื่อที่ป้อนเข้าไปอาจไม่ใช่ชื่อของ\n"
"โฮสต์แบบ TCP/IP) และข้อมูลชื่อคิวของเครื่องพิมพ์ที่ต้องการใช้\n"
"รวมทั้งชื่อผู้ใช้และรหัสผ่านด้วย"

#: printer/printerdrake.pm:1491
#, c-format
msgid "Printer Server"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: printer/printerdrake.pm:1492
#, c-format
msgid "Print Queue Name"
msgstr "ชื่อพรินต์คิว"

#: printer/printerdrake.pm:1497
#, c-format
msgid "NCP server name missing!"
msgstr ""

#: printer/printerdrake.pm:1501
#, c-format
msgid "NCP queue name missing!"
msgstr ""

#: printer/printerdrake.pm:1574 printer/printerdrake.pm:1594
#, c-format
msgid ", host \"%s\", port %s"
msgstr ""

#: printer/printerdrake.pm:1577 printer/printerdrake.pm:1597
#, c-format
msgid "Host \"%s\", port %s"
msgstr ""

#: printer/printerdrake.pm:1618
#, fuzzy, c-format
msgid "TCP/Socket Printer Options"
msgstr "อ็อปชั่นของเครื่องพิมพ์โลคอล"

#: printer/printerdrake.pm:1620
#, c-format
msgid ""
"Choose one of the auto-detected printers from the list or enter the hostname "
"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""

#: printer/printerdrake.pm:1621
#, fuzzy, c-format
msgid ""
"To print to a TCP or socket printer, you need to provide the host name or IP "
"of the printer and optionally the port number (default is 9100). On HP "
"JetDirect servers the port number is usually 9100, on other servers it can "
"vary. See the manual of your hardware."
msgstr ""
"To print to a socket printer, you need to provide the\n"
"hostname of the printer and optionally the port number."

#: printer/printerdrake.pm:1625
#, fuzzy, c-format
msgid "Printer host name or IP missing!"
msgstr "ชื่อของเครื่องพิมพ์"

#: printer/printerdrake.pm:1648
#, fuzzy, c-format
msgid "Printer host name or IP"
msgstr "ชื่อของเครื่องพิมพ์"

#: printer/printerdrake.pm:1704
#, fuzzy, c-format
msgid "Refreshing Device URI list..."
msgstr "อ่าน CUPS drivers database..."

#: printer/printerdrake.pm:1707 printer/printerdrake.pm:1709
#, c-format
msgid "Printer Device URI"
msgstr "อุปกรณ์เครื่องพิมพ์ URI"

#: printer/printerdrake.pm:1708
#, c-format
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""

#: printer/printerdrake.pm:1731
#, c-format
msgid "A valid URI must be entered!"
msgstr ""

#: printer/printerdrake.pm:1834
#, c-format
msgid "Pipe into command"
msgstr ""

#: printer/printerdrake.pm:1835
#, c-format
msgid ""
"Here you can specify any arbitrary command line into which the job should be "
"piped instead of being sent directly to a printer."
msgstr ""

#: printer/printerdrake.pm:1836
#, fuzzy, c-format
msgid "Command line"
msgstr "ชื่อโดเมน"

#: printer/printerdrake.pm:1840
#, c-format
msgid "A command line must be entered!"
msgstr ""

#: printer/printerdrake.pm:1873
#, c-format
msgid ""
"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
"LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), "
"an HP PhotoSmart or an HP LaserJet 2200?"
msgstr ""

#: printer/printerdrake.pm:1887
#, fuzzy, c-format
msgid "Installing HPOJ package..."
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: printer/printerdrake.pm:1894
#, c-format
msgid "Only printing will be possible on the %s."
msgstr ""

#: printer/printerdrake.pm:1903 printer/printerdrake.pm:2025
#, c-format
msgid "Checking device and configuring HPOJ..."
msgstr ""

#: printer/printerdrake.pm:1946
#, fuzzy, c-format
msgid "Installing SANE packages..."
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: printer/printerdrake.pm:1956
#, c-format
msgid "Scanning on the %s will not be possible."
msgstr ""

#: printer/printerdrake.pm:1983
#, fuzzy, c-format
msgid "Installing mtools packages..."
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: printer/printerdrake.pm:1990
#, c-format
msgid "Photo memory card access on the %s will not be possible."
msgstr ""

#: printer/printerdrake.pm:2005
#, c-format
msgid "Scanning on your HP multi-function device"
msgstr ""

#: printer/printerdrake.pm:2013
#, c-format
msgid "Photo memory card access on your HP multi-function device"
msgstr ""

#: printer/printerdrake.pm:2062
#, c-format
msgid "Making printer port available for CUPS..."
msgstr ""

#: printer/printerdrake.pm:2071 printer/printerdrake.pm:2315
#: printer/printerdrake.pm:2459
#, fuzzy, c-format
msgid "Reading printer database..."
msgstr "อ่าน CUPS drivers database..."

#: printer/printerdrake.pm:2281
#, c-format
msgid "Enter Printer Name and Comments"
msgstr ""

#: printer/printerdrake.pm:2285 printer/printerdrake.pm:3421
#, c-format
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""

#: printer/printerdrake.pm:2291 printer/printerdrake.pm:3426
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""

#: printer/printerdrake.pm:2300
#, c-format
msgid ""
"Every printer needs a name (for example \"printer\"). The Description and "
"Location fields do not need to be filled in. They are comments for the users."
msgstr ""

#: printer/printerdrake.pm:2301
#, c-format
msgid "Name of printer"
msgstr "ชื่อเครื่องพิมพ์"

#: printer/printerdrake.pm:2302 standalone/drakconnect:570
#: standalone/harddrake2:41 standalone/printerdrake:212
#: standalone/printerdrake:219
#, c-format
msgid "Description"
msgstr "รายละเอียด"

#: printer/printerdrake.pm:2303 standalone/printerdrake:212
#: standalone/printerdrake:219
#, c-format
msgid "Location"
msgstr "ตำแหน่ง"

#: printer/printerdrake.pm:2320
#, fuzzy, c-format
msgid "Preparing printer database..."
msgstr "อ่าน CUPS drivers database..."

#: printer/printerdrake.pm:2438
#, fuzzy, c-format
msgid "Your printer model"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: printer/printerdrake.pm:2439
#, c-format
msgid ""
"Printerdrake has compared the model name resulting from the printer auto-"
"detection with the models listed in its printer database to find the best "
"match. This choice can be wrong, especially when your printer is not listed "
"at all in the database. So check whether the choice is correct and click "
"\"The model is correct\" if so and if not, click \"Select model manually\" "
"so that you can choose your printer model manually on the next screen.\n"
"\n"
"For your printer Printerdrake has found:\n"
"\n"
"%s"
msgstr ""

#: printer/printerdrake.pm:2444 printer/printerdrake.pm:2447
#, fuzzy, c-format
msgid "The model is correct"
msgstr "ถูกต้องหรือไม่?"

#: printer/printerdrake.pm:2445 printer/printerdrake.pm:2446
#: printer/printerdrake.pm:2449
#, fuzzy, c-format
msgid "Select model manually"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: printer/printerdrake.pm:2472
#, c-format
msgid ""
"\n"
"\n"
"Please check whether Printerdrake did the auto-detection of your printer "
"model correctly. Find the correct model in the list when a wrong model or "
"\"Raw printer\" is highlighted."
msgstr ""

#: printer/printerdrake.pm:2491
#, c-format
msgid "Install a manufacturer-supplied PPD file"
msgstr ""

#: printer/printerdrake.pm:2522
#, c-format
msgid ""
"Every PostScript printer is delivered with a PPD file which describes the "
"printer's options and features."
msgstr ""

#: printer/printerdrake.pm:2523
#, c-format
msgid ""
"This file is usually somewhere on the CD with the Windows and Mac drivers "
"delivered with the printer."
msgstr ""

#: printer/printerdrake.pm:2524
#, c-format
msgid "You can find the PPD files also on the manufacturer's web sites."
msgstr ""

#: printer/printerdrake.pm:2525
#, c-format
msgid ""
"If you have Windows installed on your machine, you can find the PPD file on "
"your Windows partition, too."
msgstr ""

#: printer/printerdrake.pm:2526
#, c-format
msgid ""
"Installing the printer's PPD file and using it when setting up the printer "
"makes all options of the printer available which are provided by the "
"printer's hardware"
msgstr ""

#: printer/printerdrake.pm:2527
#, c-format
msgid ""
"Here you can choose the PPD file to be installed on your machine, it will "
"then be used for the setup of your printer."
msgstr ""

#: printer/printerdrake.pm:2529
#, fuzzy, c-format
msgid "Install PPD file from"
msgstr "ติดตั้ง"

#: printer/printerdrake.pm:2531 printer/printerdrake.pm:2538
#: standalone/scannerdrake:180 standalone/scannerdrake:188
#: standalone/scannerdrake:239 standalone/scannerdrake:246
#, c-format
msgid "CD-ROM"
msgstr "ซีดี-รอม"

#: printer/printerdrake.pm:2532 printer/printerdrake.pm:2540
#: standalone/scannerdrake:181 standalone/scannerdrake:190
#: standalone/scannerdrake:240 standalone/scannerdrake:248
#, fuzzy, c-format
msgid "Floppy Disk"
msgstr "บันทึกลงแผ่นฟล้อปปี้"

#: printer/printerdrake.pm:2533 printer/printerdrake.pm:2542
#: standalone/scannerdrake:182 standalone/scannerdrake:192
#: standalone/scannerdrake:241 standalone/scannerdrake:250
#, fuzzy, c-format
msgid "Other place"
msgstr "กำลังตรวจสอบพอร์ต"

#: printer/printerdrake.pm:2548
#, fuzzy, c-format
msgid "Select PPD file"
msgstr "เลือกไฟล์"

#: printer/printerdrake.pm:2552
#, c-format
msgid "The PPD file %s does not exist or is unreadable!"
msgstr ""

#: printer/printerdrake.pm:2558
#, c-format
msgid "The PPD file %s does not conform with the PPD specifications!"
msgstr ""

#: printer/printerdrake.pm:2569
#, fuzzy, c-format
msgid "Installing PPD file..."
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: printer/printerdrake.pm:2682
#, fuzzy, c-format
msgid "OKI winprinter configuration"
msgstr "การคอนฟิก Internet"

#: printer/printerdrake.pm:2683
#, c-format
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they work only when "
"connected to the first parallel port. When your printer is connected to "
"another port or to a print server box please connect the printer to the "
"first parallel port before you print a test page. Otherwise the printer will "
"not work. Your connection type setting will be ignored by the driver."
msgstr ""

#: printer/printerdrake.pm:2707 printer/printerdrake.pm:2736
#, fuzzy, c-format
msgid "Lexmark inkjet configuration"
msgstr "การคอนฟิก Internet"

#: printer/printerdrake.pm:2708
#, c-format
msgid ""
"The inkjet printer drivers provided by Lexmark only support local printers, "
"no printers on remote machines or print server boxes. Please connect your "
"printer to a local port or configure it on the machine where it is connected "
"to."
msgstr ""

#: printer/printerdrake.pm:2737
#, c-format
msgid ""
"To be able to print with your Lexmark inkjet and this configuration, you "
"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
"\"Linux\" as operating system. The drivers come as RPM packages or shell "
"scripts with interactive graphical installation. You do not need to do this "
"configuration by the graphical frontends. Cancel directly after the license "
"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
"adjust the head alignment settings with this program."
msgstr ""

#: printer/printerdrake.pm:2746
#, fuzzy, c-format
msgid "Lexmark X125 configuration"
msgstr "การคอนฟิก Internet"

#: printer/printerdrake.pm:2747
#, c-format
msgid ""
"The driver for this printer only supports printers locally connected via "
"USB, no printers on remote machines or print server boxes. Please connect "
"your printer to a local USB port or configure it on the machine where it is "
"connected to."
msgstr ""

#: printer/printerdrake.pm:2765
#, c-format
msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""

#: printer/printerdrake.pm:2878
#, c-format
msgid ""
"Printer default settings\n"
"\n"
"You should make sure that the page size and the ink type/printing mode (if "
"available) and also the hardware configuration of laser printers (memory, "
"duplex unit, extra trays) are set correctly. Note that with a very high "
"printout quality/resolution printing can get substantially slower."
msgstr ""

#: printer/printerdrake.pm:3003
#, fuzzy, c-format
msgid "Printer default settings"
msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"

#: printer/printerdrake.pm:3010
#, c-format
msgid "Option %s must be an integer number!"
msgstr ""

#: printer/printerdrake.pm:3014
#, c-format
msgid "Option %s must be a number!"
msgstr ""

#: printer/printerdrake.pm:3018
#, c-format
msgid "Option %s out of range!"
msgstr ""

#: printer/printerdrake.pm:3069
#, fuzzy, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr "คุณต้องการพิมพ์ทดสอบหรือไม่?"

#: printer/printerdrake.pm:3084
#, fuzzy, c-format
msgid "Test pages"
msgstr "กำลังตรวจสอบพอร์ต"

#: printer/printerdrake.pm:3085
#, c-format
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed and on "
"laser printers with too low memory it can even not come out. In most cases "
"it is enough to print the standard test page."
msgstr ""

#: printer/printerdrake.pm:3089
#, fuzzy, c-format
msgid "No test pages"
msgstr "ใช้ ให้พิมพ์กระดาษทดสอบทั้งสองแบบ"

#: printer/printerdrake.pm:3090
#, fuzzy, c-format
msgid "Print"
msgstr "เครื่องพิมพ์"

#: printer/printerdrake.pm:3115
#, fuzzy, c-format
msgid "Standard test page"
msgstr "เครื่องมีอ Standard"

#: printer/printerdrake.pm:3118
#, c-format
msgid "Alternative test page (Letter)"
msgstr ""

#: printer/printerdrake.pm:3121
#, fuzzy, c-format
msgid "Alternative test page (A4)"
msgstr "กำลังพิมพ์กระดาษทดสอบ"

#: printer/printerdrake.pm:3123
#, fuzzy, c-format
msgid "Photo test page"
msgstr "กำลังพิมพ์กระดาษทดสอบ"

#: printer/printerdrake.pm:3127
#, fuzzy, c-format
msgid "Do not print any test page"
msgstr "กำลังพิมพ์กระดาษทดสอบ"

#: printer/printerdrake.pm:3135 printer/printerdrake.pm:3300
#, c-format
msgid "Printing test page(s)..."
msgstr "กำลังพิมพ์กระดาษทดสอบ"

#: printer/printerdrake.pm:3150
#, fuzzy, c-format
msgid "Could not install the %s package!"
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: printer/printerdrake.pm:3152
#, fuzzy, c-format
msgid "Skipping photo test page."
msgstr "กำลังพิมพ์กระดาษทดสอบ"

#: printer/printerdrake.pm:3169
#, fuzzy, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""
"แผ่นทดสอบการพิมพ์ได้ถูกส่งไปที่เครื่องพิมพ์แล้ว\n"
"กรุณารอสักครู่\n"
"สถานะการพิมพ์:\n"
"%s\n"
"\n"
"มันทำงานถูกต้องใหมครับ"

#: printer/printerdrake.pm:3173
#, fuzzy, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""
"แผ่นทดสอบการพิมพ์ได้ถูกส่งไปที่เครื่องพิมพ์แล้ว\n"
"กรุณารอสักครู่\n"
"มันทำงานถูกต้องใหมครับ"

#: printer/printerdrake.pm:3180
#, c-format
msgid "Did it work properly?"
msgstr ""

#: printer/printerdrake.pm:3201 printer/printerdrake.pm:4397
#, fuzzy, c-format
msgid "Raw printer"
msgstr "ไม่มีเครื่องพิมพ์"

#: printer/printerdrake.pm:3231
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""

#: printer/printerdrake.pm:3233
#, c-format
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: printer/printerdrake.pm:3236 printer/printerdrake.pm:3253
#: printer/printerdrake.pm:3263
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""

#: printer/printerdrake.pm:3239 printer/printerdrake.pm:3279
#, c-format
msgid ""
"To know about the options available for the current printer read either the "
"list shown below or click on the \"Print option list\" button.%s%s%s\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:3243
#, c-format
msgid ""
"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:3248 printer/printerdrake.pm:3258
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""

#: printer/printerdrake.pm:3250 printer/printerdrake.pm:3260
#: printer/printerdrake.pm:3270
#, c-format
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: printer/printerdrake.pm:3255 printer/printerdrake.pm:3265
#, c-format
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button."
msgstr ""

#: printer/printerdrake.pm:3268
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""

#: printer/printerdrake.pm:3272
#, c-format
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""

#: printer/printerdrake.pm:3276
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""

#: printer/printerdrake.pm:3286
#, fuzzy, c-format
msgid "Printing/Scanning/Photo Cards on \"%s\""
msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"

#: printer/printerdrake.pm:3287
#, fuzzy, c-format
msgid "Printing/Scanning on \"%s\""
msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"

#: printer/printerdrake.pm:3289
#, fuzzy, c-format
msgid "Printing/Photo Card Access on \"%s\""
msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"

#: printer/printerdrake.pm:3290
#, fuzzy, c-format
msgid "Printing on the printer \"%s\""
msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"

#: printer/printerdrake.pm:3293 printer/printerdrake.pm:3296
#: printer/printerdrake.pm:3297 printer/printerdrake.pm:3298
#: printer/printerdrake.pm:4384 standalone/drakTermServ:313
#: standalone/drakbackup:4063 standalone/drakbug:177 standalone/drakfont:500
#: standalone/drakfont:591 standalone/net_monitor:107
#: standalone/printerdrake:515
#, fuzzy, c-format
msgid "Close"
msgstr "Mouse"

#: printer/printerdrake.pm:3296
#, fuzzy, c-format
msgid "Print option list"
msgstr "อ๊อปชั่นของเครื่องพิมพ์"

#: printer/printerdrake.pm:3317
#, c-format
msgid ""
"Your multi-function device was configured automatically to be able to scan. "
"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
"scanner when you have more than one) from the command line or with the "
"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
"\" menu. Call also \"man scanimage\" on the command line to get more "
"information.\n"
"\n"
"Do not use \"scannerdrake\" for this device!"
msgstr ""

#: printer/printerdrake.pm:3343
#, c-format
msgid ""
"Your printer was configured automatically to give you access to the photo "
"card drives from your PC. Now you can access your photo cards using the "
"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
"\"man mtools\" on the command line for more info). You find the card's file "
"system under the drive letter \"p:\", or subsequent drive letters when you "
"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
"can switch between drive letters with the field at the upper-right corners "
"of the file lists."
msgstr ""

#: printer/printerdrake.pm:3365 printer/printerdrake.pm:3767
#, fuzzy, c-format
msgid "Reading printer data..."
msgstr "อ่าน CUPS drivers database..."

#: printer/printerdrake.pm:3385 printer/printerdrake.pm:3412
#: printer/printerdrake.pm:3447
#, fuzzy, c-format
msgid "Transfer printer configuration"
msgstr "การคอนฟิก Internet"

#: printer/printerdrake.pm:3386
#, c-format
msgid ""
"You can copy the printer configuration which you have done for the spooler %"
"s to %s, your current spooler. All the configuration data (printer name, "
"description, location, connection type, and default option settings) is "
"overtaken, but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following reasons:\n"
msgstr ""

#: printer/printerdrake.pm:3389
#, c-format
msgid ""
"CUPS does not support printers on Novell servers or printers sending the "
"data into a free-formed command.\n"
msgstr ""

#: printer/printerdrake.pm:3391
#, c-format
msgid ""
"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
"printers.\n"
msgstr ""

#: printer/printerdrake.pm:3393
#, c-format
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr ""

#: printer/printerdrake.pm:3395
#, c-format
msgid ""
"In addition, queues not created with this program or \"foomatic-configure\" "
"cannot be transferred."
msgstr ""

#: printer/printerdrake.pm:3396
#, c-format
msgid ""
"\n"
"Also printers configured with the PPD files provided by their manufacturers "
"or with native CUPS drivers cannot be transferred."
msgstr ""

#: printer/printerdrake.pm:3397
#, c-format
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""

#: printer/printerdrake.pm:3400
#, c-format
msgid "Do not transfer printers"
msgstr ""

#: printer/printerdrake.pm:3401 printer/printerdrake.pm:3417
#, c-format
msgid "Transfer"
msgstr ""

#: printer/printerdrake.pm:3413
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""

#: printer/printerdrake.pm:3434
#, fuzzy, c-format
msgid "New printer name"
msgstr "ไม่มีเครื่องพิมพ์"

#: printer/printerdrake.pm:3437
#, c-format
msgid "Transferring %s..."
msgstr ""

#: printer/printerdrake.pm:3448
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"), Should it be also "
"the default printer under the new printing system %s?"
msgstr ""

#: printer/printerdrake.pm:3458
#, fuzzy, c-format
msgid "Refreshing printer data..."
msgstr "อ่าน CUPS drivers database..."

#: printer/printerdrake.pm:3467
#, fuzzy, c-format
msgid "Starting network..."
msgstr "ทดสอบ connection..."

#: printer/printerdrake.pm:3508 printer/printerdrake.pm:3512
#: printer/printerdrake.pm:3514
#, fuzzy, c-format
msgid "Configure the network now"
msgstr "คอนฟิกระบบเน็ตเวิร์ก"

#: printer/printerdrake.pm:3509
#, fuzzy, c-format
msgid "Network functionality not configured"
msgstr "ไม่มีการคอนฟิกจอภาพ"

#: printer/printerdrake.pm:3510
#, c-format
msgid ""
"You are going to configure a remote printer. This needs working network "
"access, but your network is not configured yet. If you go on without network "
"configuration, you will not be able to use the printer which you are "
"configuring now. How do you want to proceed?"
msgstr ""

#: printer/printerdrake.pm:3513
#, fuzzy, c-format
msgid "Go on without configuring the network"
msgstr "กำลังคอนฟิกระบบเน็ตเวิร์ก"

#: printer/printerdrake.pm:3547
#, c-format
msgid ""
"The network configuration done during the installation cannot be started "
"now. Please check whether the network is accessible after booting your "
"system and correct the configuration using the %s Control Center, section "
"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
"also using the %s Control Center, section \"Hardware\"/\"Printer\""
msgstr ""

#: printer/printerdrake.pm:3548
#, c-format
msgid ""
"The network access was not running and could not be started. Please check "
"your configuration and your hardware. Then try to configure your remote "
"printer again."
msgstr ""

#: printer/printerdrake.pm:3558
#, fuzzy, c-format
msgid "Restarting printing system..."
msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"

#: printer/printerdrake.pm:3597
#, fuzzy, c-format
msgid "high"
msgstr "สูง"

#: printer/printerdrake.pm:3597
#, fuzzy, c-format
msgid "paranoid"
msgstr "Paranoid"

#: printer/printerdrake.pm:3598
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr ""

#: printer/printerdrake.pm:3599
#, c-format
msgid ""
"You are about to install the printing system %s on a system running in the %"
"s security level.\n"
"\n"
"This printing system runs a daemon (background process) which waits for "
"print jobs and handles them. This daemon is also accessible by remote "
"machines through the network and so it is a possible point for attacks. "
"Therefore only a few selected daemons are started by default in this "
"security level.\n"
"\n"
"Do you really want to configure printing on this machine?"
msgstr ""

#: printer/printerdrake.pm:3633
#, fuzzy, c-format
msgid "Starting the printing system at boot time"
msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"

#: printer/printerdrake.pm:3634
#, c-format
msgid ""
"The printing system (%s) will not be started automatically when the machine "
"is booted.\n"
"\n"
"It is possible that the automatic starting was turned off by changing to a "
"higher security level, because the printing system is a potential point for "
"attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing system turned on "
"again?"
msgstr ""

#: printer/printerdrake.pm:3655 printer/printerdrake.pm:3889
#, c-format
msgid "Checking installed software..."
msgstr ""

#: printer/printerdrake.pm:3661
#, fuzzy, c-format
msgid "Removing %s ..."
msgstr "ความละเอียดของภาพ %s\n"

#: printer/printerdrake.pm:3665
#, fuzzy, c-format
msgid "Could not remove the %s printing system!"
msgstr "คอนฟิกระบบเน็ตเวิร์ก"

#: printer/printerdrake.pm:3674
#, fuzzy, c-format
msgid "Installing %s ..."
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: printer/printerdrake.pm:3678
#, fuzzy, c-format
msgid "Could not install the %s printing system!"
msgstr "คอนฟิกระบบเน็ตเวิร์ก"

#: printer/printerdrake.pm:3727
#, fuzzy, c-format
msgid "Setting Default Printer..."
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: printer/printerdrake.pm:3747
#, fuzzy, c-format
msgid "Select Printer Spooler"
msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"

#: printer/printerdrake.pm:3748
#, fuzzy, c-format
msgid "Which printing system (spooler) do you want to use?"
msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"

#: printer/printerdrake.pm:3799
#, fuzzy, c-format
msgid "Failed to configure printer \"%s\"!"
msgstr "การคอนฟิกเครื่องพิมพ์"

#: printer/printerdrake.pm:3812
#, fuzzy, c-format
msgid "Installing Foomatic..."
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: printer/printerdrake.pm:3818
#, c-format
msgid "Could not install %s packages, %s cannot be started!"
msgstr ""

#: printer/printerdrake.pm:3910
#, c-format
msgid "Could not install necessary packages, %s cannot be started!"
msgstr ""

#: printer/printerdrake.pm:4011
#, fuzzy, c-format
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; or to view information about "
"it. "
msgstr ""
"ต่อไปนี้เป็นข้อมูลรอการพิมพ์\n"
"คุณสามารถเพิ่มข้อมูลหรือแก้ไขข้อมูลที่มีได้"

#: printer/printerdrake.pm:4039
#, c-format
msgid "Display all available remote CUPS printers"
msgstr ""

#: printer/printerdrake.pm:4040
#, c-format
msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr ""

#: printer/printerdrake.pm:4050
#, fuzzy, c-format
msgid "CUPS configuration"
msgstr "การปรับแต่ง LAN"

#: printer/printerdrake.pm:4062
#, fuzzy, c-format
msgid "Change the printing system"
msgstr "คอนฟิกระบบเน็ตเวิร์ก"

#: printer/printerdrake.pm:4071
#, c-format
msgid "Normal Mode"
msgstr "โหมดธรรมดา"

#: printer/printerdrake.pm:4072
#, c-format
msgid "Expert Mode"
msgstr "โหมดผู้เชี่ยวชาญ"

#: printer/printerdrake.pm:4343 printer/printerdrake.pm:4398
#: printer/printerdrake.pm:4479 printer/printerdrake.pm:4489
#, c-format
msgid "Printer options"
msgstr "อ๊อปชั่นของเครื่องพิมพ์"

#: printer/printerdrake.pm:4379
#, fuzzy, c-format
msgid "Modify printer configuration"
msgstr "การคอนฟิก Internet"

#: printer/printerdrake.pm:4381
#, fuzzy, c-format
msgid ""
"Printer %s\n"
"What do you want to modify on this printer?"
msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"

#: printer/printerdrake.pm:4385
#, c-format
msgid "Do it!"
msgstr ""

#: printer/printerdrake.pm:4390 printer/printerdrake.pm:4448
#, fuzzy, c-format
msgid "Printer connection type"
msgstr "การเชื่อมต่อกับ Internet แบบ sharing"

#: printer/printerdrake.pm:4391 printer/printerdrake.pm:4452
#, fuzzy, c-format
msgid "Printer name, description, location"
msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"

#: printer/printerdrake.pm:4393 printer/printerdrake.pm:4471
#, c-format
msgid "Printer manufacturer, model, driver"
msgstr ""

#: printer/printerdrake.pm:4394 printer/printerdrake.pm:4472
#, c-format
msgid "Printer manufacturer, model"
msgstr ""

#: printer/printerdrake.pm:4400 printer/printerdrake.pm:4483
#, c-format
msgid "Set this printer as the default"
msgstr ""

#: printer/printerdrake.pm:4402 printer/printerdrake.pm:4490
#, c-format
msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
msgstr ""

#: printer/printerdrake.pm:4403 printer/printerdrake.pm:4495
#, c-format
msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
msgstr ""

#: printer/printerdrake.pm:4404 printer/printerdrake.pm:4500
#, fuzzy, c-format
msgid "Print test pages"
msgstr "กำลังพิมพ์กระดาษทดสอบ"

#: printer/printerdrake.pm:4405 printer/printerdrake.pm:4502
#, fuzzy, c-format
msgid "Learn how to use this printer"
msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"

#: printer/printerdrake.pm:4406 printer/printerdrake.pm:4504
#, fuzzy, c-format
msgid "Remove printer"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: printer/printerdrake.pm:4460
#, fuzzy, c-format
msgid "Removing old printer \"%s\"..."
msgstr "อ่าน CUPS drivers database..."

#: printer/printerdrake.pm:4491
#, c-format
msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
msgstr ""

#: printer/printerdrake.pm:4493
#, c-format
msgid ""
"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
msgstr ""

#: printer/printerdrake.pm:4494
#, c-format
msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr ""

#: printer/printerdrake.pm:4496
#, c-format
msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr ""

#: printer/printerdrake.pm:4498
#, c-format
msgid ""
"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
"GIMP."
msgstr ""

#: printer/printerdrake.pm:4499
#, c-format
msgid ""
"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr ""

#: printer/printerdrake.pm:4543
#, fuzzy, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr "คุณต้องการเริ่มทำงาน Network ใหม่หรือไม่"

#: printer/printerdrake.pm:4547
#, fuzzy, c-format
msgid "Removing printer \"%s\"..."
msgstr "อ่าน CUPS drivers database..."

#: printer/printerdrake.pm:4571
#, fuzzy, c-format
msgid "Default printer"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: printer/printerdrake.pm:4572
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr ""

#: raid.pm:37
#, c-format
msgid "Can't add a partition to _formatted_ RAID md%d"
msgstr "ไม่สามารถเพิ่มพาร์ติชั่นเป็น _formatted_ RAID md%d"

#: raid.pm:139
#, c-format
msgid "mkraid failed (maybe raidtools are missing?)"
msgstr "mkraid failed (maybe raidtools are missing?)"

#: raid.pm:139
#, c-format
msgid "mkraid failed"
msgstr "mkraid failed"

#: raid.pm:155
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "ไม่มีพาร์ติชั่นพอสำหรับ RAID ระดับ %d\n"

#: scanner.pm:96
#, c-format
msgid "Could not create directory /usr/share/sane/firmware!"
msgstr ""

#: scanner.pm:107
#, c-format
msgid "Could not create link /usr/share/sane/%s!"
msgstr ""

#: scanner.pm:114
#, c-format
msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
msgstr ""

#: scanner.pm:121
#, c-format
msgid "Could not set permissions of firmware file %s!"
msgstr ""

#: scanner.pm:200 standalone/scannerdrake:65 standalone/scannerdrake:69
#: standalone/scannerdrake:77 standalone/scannerdrake:344
#: standalone/scannerdrake:419 standalone/scannerdrake:463
#: standalone/scannerdrake:467 standalone/scannerdrake:489
#: standalone/scannerdrake:554
#, fuzzy, c-format
msgid "Scannerdrake"
msgstr "เลือกกราฟฟิคการ์ด"

#: scanner.pm:201 standalone/scannerdrake:920
#, c-format
msgid "Could not install the packages needed to share your scanner(s)."
msgstr ""

#: scanner.pm:202
#, c-format
msgid "Your scanner(s) will not be available for non-root users."
msgstr ""

#: security/help.pm:11
#, c-format
msgid "Accept/Refuse bogus IPv4 error messages."
msgstr ""

#: security/help.pm:13
#, c-format
msgid " Accept/Refuse broadcasted icmp echo."
msgstr ""

#: security/help.pm:15
#, c-format
msgid " Accept/Refuse icmp echo."
msgstr ""

#: security/help.pm:17
#, c-format
msgid "Allow/Forbid autologin."
msgstr ""

#: security/help.pm:19
#, c-format
msgid ""
"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
"\n"
"If set to NONE, no issues are allowed.\n"
"\n"
"Else only /etc/issue is allowed."
msgstr ""

#: security/help.pm:25
#, c-format
msgid "Allow/Forbid reboot by the console user."
msgstr ""

#: security/help.pm:27
#, fuzzy, c-format
msgid "Allow/Forbid remote root login."
msgstr "เครื่องพิมพ์แบบรีโมท"

#: security/help.pm:29
#, fuzzy, c-format
msgid "Allow/Forbid direct root login."
msgstr "เครื่องพิมพ์แบบรีโมท"

#: security/help.pm:31
#, c-format
msgid ""
"Allow/Forbid the list of users on the system on display managers (kdm and "
"gdm)."
msgstr ""

#: security/help.pm:33
#, c-format
msgid ""
"Allow/Forbid X connections:\n"
"\n"
"- ALL (all connections are allowed),\n"
"\n"
"- LOCAL (only connection from local machine),\n"
"\n"
"- NONE (no connection)."
msgstr ""

#: security/help.pm:41
#, c-format
msgid ""
"The argument specifies if clients are authorized to connect\n"
"to the X server from the network on the tcp port 6000 or not."
msgstr ""

#: security/help.pm:44
#, c-format
msgid ""
"Authorize:\n"
"\n"
"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
"set to \"ALL\",\n"
"\n"
"- only local ones if set to \"LOCAL\"\n"
"\n"
"- none if set to \"NONE\".\n"
"\n"
"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
"(5))."
msgstr ""

#: security/help.pm:54
#, c-format
msgid ""
"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
"symlink /etc/security/msec/server to point to\n"
"/etc/security/msec/server.<SERVER_LEVEL>.\n"
"\n"
"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
"add a service if it is present in the file during the installation of\n"
"packages."
msgstr ""

#: security/help.pm:63
#, c-format
msgid ""
"Enable/Disable crontab and at for users.\n"
"\n"
"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
"and crontab(1))."
msgstr ""

#: security/help.pm:68
#, c-format
msgid "Enable/Disable syslog reports to console 12"
msgstr ""

#: security/help.pm:70
#, c-format
msgid ""
"Enable/Disable name resolution spoofing protection.  If\n"
"\"alert\" is true, also reports to syslog."
msgstr ""

#: security/help.pm:73
#, c-format
msgid "Enable/Disable IP spoofing protection."
msgstr ""

#: security/help.pm:75
#, c-format
msgid "Enable/Disable libsafe if libsafe is found on the system."
msgstr ""

#: security/help.pm:77
#, c-format
msgid "Enable/Disable the logging of IPv4 strange packets."
msgstr ""

#: security/help.pm:79
#, c-format
msgid "Enable/Disable msec hourly security check."
msgstr ""

#: security/help.pm:81
#, c-format
msgid ""
" Enabling su only from members of the wheel group or allow su from any user."
msgstr ""

#: security/help.pm:83
#, c-format
msgid "Use password to authenticate users."
msgstr ""

#: security/help.pm:85
#, c-format
msgid "Activate/Disable ethernet cards promiscuity check."
msgstr ""

#: security/help.pm:87
#, c-format
msgid " Activate/Disable daily security check."
msgstr ""

#: security/help.pm:89
#, c-format
msgid " Enable/Disable sulogin(8) in single user level."
msgstr ""

#: security/help.pm:91
#, c-format
msgid "Add the name as an exception to the handling of password aging by msec."
msgstr ""

#: security/help.pm:93
#, c-format
msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
msgstr ""

#: security/help.pm:95
#, c-format
msgid "Set the password history length to prevent password reuse."
msgstr ""

#: security/help.pm:97
#, c-format
msgid ""
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters."
msgstr ""

#: security/help.pm:99
#, fuzzy, c-format
msgid "Set the root umask."
msgstr "ไม่มีรหัสผ่าน"

#: security/help.pm:100
#, c-format
msgid "if set to yes, check open ports."
msgstr ""

#: security/help.pm:101
#, c-format
msgid ""
"if set to yes, check for :\n"
"\n"
"- empty passwords,\n"
"\n"
"- no password in /etc/shadow\n"
"\n"
"- for users with the 0 id other than root."
msgstr ""

#: security/help.pm:108
#, c-format
msgid "if set to yes, check permissions of files in the users' home."
msgstr ""

#: security/help.pm:109
#, c-format
msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""

#: security/help.pm:110
#, c-format
msgid "if set to yes, run the daily security checks."
msgstr ""

#: security/help.pm:111
#, c-format
msgid "if set to yes, check additions/removals of sgid files."
msgstr ""

#: security/help.pm:112
#, c-format
msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""

#: security/help.pm:113
#, c-format
msgid "if set to yes, verify checksum of the suid/sgid files."
msgstr ""

#: security/help.pm:114
#, c-format
msgid "if set to yes, check additions/removals of suid root files."
msgstr ""

#: security/help.pm:115
#, c-format
msgid "if set to yes, report unowned files."
msgstr ""

#: security/help.pm:116
#, c-format
msgid "if set to yes, check files/directories writable by everybody."
msgstr ""

#: security/help.pm:117
#, c-format
msgid "if set to yes, run chkrootkit checks."
msgstr ""

#: security/help.pm:118
#, c-format
msgid ""
"if set, send the mail report to this email address else send it to root."
msgstr ""

#: security/help.pm:119
#, c-format
msgid "if set to yes, report check result by mail."
msgstr ""

#: security/help.pm:120
#, c-format
msgid "Do not send mails if there's nothing to warn about"
msgstr ""

#: security/help.pm:121
#, c-format
msgid "if set to yes, run some checks against the rpm database."
msgstr ""

#: security/help.pm:122
#, c-format
msgid "if set to yes, report check result to syslog."
msgstr ""

#: security/help.pm:123
#, c-format
msgid "if set to yes, reports check result to tty."
msgstr ""

#: security/help.pm:125
#, c-format
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr ""

#: security/help.pm:127
#, c-format
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr ""

#: security/help.pm:127
#, c-format
msgid "Timeout unit is second"
msgstr ""

#: security/help.pm:129
#, fuzzy, c-format
msgid "Set the user umask."
msgstr "ชื่อผู้ใช้"

#: security/l10n.pm:11
#, c-format
msgid "Accept bogus IPv4 error messages"
msgstr ""

#: security/l10n.pm:12
#, c-format
msgid "Accept broadcasted icmp echo"
msgstr ""

#: security/l10n.pm:13
#, c-format
msgid "Accept icmp echo"
msgstr ""

#: security/l10n.pm:15
#, c-format
msgid "/etc/issue* exist"
msgstr ""

#: security/l10n.pm:16
#, c-format
msgid "Reboot by the console user"
msgstr ""

#: security/l10n.pm:17
#, fuzzy, c-format
msgid "Allow remote root login"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: security/l10n.pm:18
#, c-format
msgid "Direct root login"
msgstr ""

#: security/l10n.pm:19
#, c-format
msgid "List users on display managers (kdm and gdm)"
msgstr ""

#: security/l10n.pm:20
#, fuzzy, c-format
msgid "Allow X Window connections"
msgstr "การติดต่อโดยใช้ Modem ธรรมดา"

#: security/l10n.pm:21
#, c-format
msgid "Authorize TCP connections to X Window"
msgstr ""

#: security/l10n.pm:22
#, c-format
msgid "Authorize all services controlled by tcp_wrappers"
msgstr ""

#: security/l10n.pm:23
#, fuzzy, c-format
msgid "Chkconfig obey msec rules"
msgstr "ปรับแต่งการบริการต่างๆ"

#: security/l10n.pm:24
#, c-format
msgid "Enable \"crontab\" and \"at\" for users"
msgstr ""

#: security/l10n.pm:25
#, c-format
msgid "Syslog reports to console 12"
msgstr ""

#: security/l10n.pm:26
#, c-format
msgid "Name resolution spoofing protection"
msgstr ""

#: security/l10n.pm:27
#, c-format
msgid "Enable IP spoofing protection"
msgstr ""

#: security/l10n.pm:28
#, c-format
msgid "Enable libsafe if libsafe is found on the system"
msgstr ""

#: security/l10n.pm:29
#, c-format
msgid "Enable the logging of IPv4 strange packets"
msgstr ""

#: security/l10n.pm:30
#, c-format
msgid "Enable msec hourly security check"
msgstr ""

#: security/l10n.pm:31
#, c-format
msgid "Enable su only from the wheel group members or for any user"
msgstr ""

#: security/l10n.pm:32
#, c-format
msgid "Use password to authenticate users"
msgstr ""

#: security/l10n.pm:33
#, c-format
msgid "Ethernet cards promiscuity check"
msgstr ""

#: security/l10n.pm:34
#, c-format
msgid "Daily security check"
msgstr ""

#: security/l10n.pm:35
#, c-format
msgid "Sulogin(8) in single user level"
msgstr ""

#: security/l10n.pm:36
#, fuzzy, c-format
msgid "No password aging for"
msgstr "ไม่มีรหัสผ่าน"

#: security/l10n.pm:37
#, c-format
msgid "Set password expiration and account inactivation delays"
msgstr ""

#: security/l10n.pm:38
#, fuzzy, c-format
msgid "Password history length"
msgstr "รหัสผ่านนี้ง่ายต่อการเดา"

#: security/l10n.pm:39
#, c-format
msgid "Password minimum length and number of digits and upcase letters"
msgstr ""

#: security/l10n.pm:40
#, fuzzy, c-format
msgid "Root umask"
msgstr "ไม่มีรหัสผ่าน"

#: security/l10n.pm:41
#, c-format
msgid "Shell history size"
msgstr ""

#: security/l10n.pm:42
#, fuzzy, c-format
msgid "Shell timeout"
msgstr "Kernel Boot Timeout"

#: security/l10n.pm:43
#, fuzzy, c-format
msgid "User umask"
msgstr "ชื่อผู้ใช้"

#: security/l10n.pm:44
#, fuzzy, c-format
msgid "Check open ports"
msgstr "ค้นหาเจอบน port %s"

#: security/l10n.pm:45
#, c-format
msgid "Check for unsecured accounts"
msgstr ""

#: security/l10n.pm:46
#, c-format
msgid "Check permissions of files in the users' home"
msgstr ""

#: security/l10n.pm:47
#, c-format
msgid "Check if the network devices are in promiscuous mode"
msgstr ""

#: security/l10n.pm:48
#, c-format
msgid "Run the daily security checks"
msgstr ""

#: security/l10n.pm:49
#, c-format
msgid "Check additions/removals of sgid files"
msgstr ""

#: security/l10n.pm:50
#, c-format
msgid "Check empty password in /etc/shadow"
msgstr ""

#: security/l10n.pm:51
#, c-format
msgid "Verify checksum of the suid/sgid files"
msgstr ""

#: security/l10n.pm:52
#, c-format
msgid "Check additions/removals of suid root files"
msgstr ""

#: security/l10n.pm:53
#, c-format
msgid "Report unowned files"
msgstr ""

#: security/l10n.pm:54
#, c-format
msgid "Check files/directories writable by everybody"
msgstr ""

#: security/l10n.pm:55
#, c-format
msgid "Run chkrootkit checks"
msgstr ""

#: security/l10n.pm:56
#, c-format
msgid "Do not send mails when unneeded"
msgstr ""

#: security/l10n.pm:57
#, c-format
msgid "If set, send the mail report to this email address else send it to root"
msgstr ""

#: security/l10n.pm:58
#, c-format
msgid "Report check result by mail"
msgstr ""

#: security/l10n.pm:59
#, c-format
msgid "Run some checks against the rpm database"
msgstr ""

#: security/l10n.pm:60
#, c-format
msgid "Report check result to syslog"
msgstr ""

#: security/l10n.pm:61
#, c-format
msgid "Reports check result to tty"
msgstr ""

#: security/level.pm:10
#, c-format
msgid "Welcome To Crackers"
msgstr "Welcome To Crackers"

#: security/level.pm:11
#, c-format
msgid "Poor"
msgstr "ต่ำกว่ามาตรฐาน"

#: security/level.pm:13
#, c-format
msgid "High"
msgstr "สูง"

#: security/level.pm:14
#, fuzzy, c-format
msgid "Higher"
msgstr "สูง"

#: security/level.pm:15
#, c-format
msgid "Paranoid"
msgstr "Paranoid"

#: security/level.pm:41
#, c-format
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive. It must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""

#: security/level.pm:44
#, c-format
msgid ""
"Passwords are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""

#: security/level.pm:45
#, c-format
msgid ""
"This is the standard security recommended for a computer that will be used "
"to connect to the Internet as a client."
msgstr ""

#: security/level.pm:46
#, c-format
msgid ""
"There are already some restrictions, and more automatic checks are run every "
"night."
msgstr ""

#: security/level.pm:47
#, c-format
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which can "
"accept\n"
"connections from many clients. Note: if your machine is only a client on the "
"Internet, you should choose a lower level."
msgstr ""

#: security/level.pm:50
#, c-format
msgid ""
"This is similar to the previous level, but the system is entirely closed and "
"security features are at their maximum."
msgstr ""

#: security/level.pm:55
#, fuzzy, c-format
msgid "DrakSec Basic Options"
msgstr "/Options/ทดลอง"

#: security/level.pm:56
#, fuzzy, c-format
msgid "Please choose the desired security level"
msgstr "เลือกระดับระบบรักษาความปลอดภัย"

#: security/level.pm:60
#, fuzzy, c-format
msgid "Security level"
msgstr "เลือกระดับระบบรักษาความปลอดภัย"

#: security/level.pm:62
#, fuzzy, c-format
msgid "Use libsafe for servers"
msgstr "เลือกออปชั่นเพิ่มเติมสำหรับเซิร์ฟเวอร์"

#: security/level.pm:63
#, c-format
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr ""

#: security/level.pm:64
#, c-format
msgid "Security Administrator (login or email)"
msgstr ""

#: services.pm:19
#, c-format
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr ""

#: services.pm:20
#, c-format
msgid "Anacron is a periodic command scheduler."
msgstr "Anacron คือโปรแกรมสำหรับตั้งเวลาทำงาน"

#: services.pm:21
#, c-format
msgid ""
"apmd is used for monitoring battery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd คือโปรแกรมดูแลสถานะของ battery \n"
"มันสามารถจะปิดเครื่องเมื่อเวลา battery มีไฟน้อย"

#: services.pm:23
#, c-format
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""

#: services.pm:25
#, c-format
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"cron คือโปรแกรมมาตรฐานของ Unix ที่สั่งทำงานโปรแกรมในเวลาที่กำหนด\n"
"vixie cron เพิ่มความสามารถให้กับ UNIX cron ซึ่งรวมถึงเพิ่ม\n"
"ระบบความปลอดภัยและ option การปรับแต่งอื่นๆ"

#: services.pm:28
#, c-format
msgid ""
"FAM is a file monitoring daemon. It is used to get reports when files "
"change.\n"
"It is used by GNOME and KDE"
msgstr ""

#: services.pm:30
#, c-format
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM ทำให้สามารถใช้ mouse กับโปรแกรมที่รันใน text mode\n"
"มันยังช่วยทำให้สามารถใช้ cut-and-paste และ popup-menu \n"
"ด้วย"

#: services.pm:33
#, c-format
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""

#: services.pm:35
#, c-format
msgid ""
"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr "Apache คือ World Wide Web server"

#: services.pm:36
#, c-format
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"Internet superserver daemon (inetd) จะสั่งทำงานโปรแกรมหลายๆอย่าง\n"
"เมื่อมีความต้องการเกิดขึ้น  ตัวอย่างโปรแกรมที่มันรับผิดชอบคือ telnet\n"
"ftp rsh และ rlogin  การยกเลิก inetd จะทำให้โปรแกรมทั้งหมดที่มันรับ\n"
"ผิดชอบอยู่ไม่ทำงาน"

#: services.pm:40
#, c-format
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""

#: services.pm:42
#, c-format
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"แพกเกจนี้จะเรียกใช้ keyboard map ตามที่ระบุอยู่ใน \n"
"/etc/sysconfig/keyboard  ซึ่งสามรถเลือกได้โดยใช้ kbdconfig\n"
"คุณควรปล่อยให้มันทำงานในเครื่องทั่วไป"

#: services.pm:45
#, c-format
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""

#: services.pm:47
#, c-format
msgid "Automatic detection and configuration of hardware at boot."
msgstr ""

#: services.pm:48
#, c-format
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""

#: services.pm:50
#, c-format
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
"lpd คือ print daemon ที่จำเป็นต้องมีถ้าต้องการให้ lpr ทำงานถูกต้อง\n"
"ที่จริงแล้วมันคือ server ที่จัดการส่งงานพิมพ์ไปเครื่องพิมพ์"

#: services.pm:52
#, c-format
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""

#: services.pm:54
#, fuzzy, c-format
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
"names to IP addresses."
msgstr ""
"named (BIND) คือ Domain Name Server (DNS) ทำหน้าที่แปลงชื่อ\n"
"host names เป็น IP addresses."

#: services.pm:55
#, c-format
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."

#: services.pm:57
#, c-format
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"Activates/Deactivates network interfaces ทั้งหมด ที่ถูกตั้งให้\n"
"เริ่มทำงานตอน boot"

#: services.pm:59
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS คือ protocol ที่ใช้กันอย่างแหร่หลายสำหรับการแชร์ไฟล์บนTCP/IP networks.\n"
"มันให้การทำงานของNFS server ที่ระบุในไฟล์ /etc/exports"

#: services.pm:62
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS คือ protocol ที่ใช้กันอย่างแหร่หลายสำหรับการแชร์ไฟล์บนTCP/IP networks.\n"
"มันให้การทำงานของNFS server "

#: services.pm:64
#, c-format
msgid ""
"Automatically switch on numlock key locker under console\n"
"and XFree at boot."
msgstr ""

#: services.pm:66
#, c-format
msgid "Support the OKI 4w and compatible winprinters."
msgstr ""

#: services.pm:67
#, c-format
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It won't get started unless configured so it is safe to "
"have\n"
"it installed on machines that don't need it."
msgstr ""
"PCMCIA สนับสนุนการทำงานของอุปกรณ์หลายๆอย่างเช่น\n"
"ethernet หรือ modem ในคอมพิวเตอร์แบบพกพา"

#: services.pm:70
#, c-format
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"Portmapper บริหารการติดต่อของ RPC ซึ่งใช้กับ\n"
"protocols เช่น NFS และ NIS Portmap server ต้องทำงานบนเครื่อง\n"
"ที่ทำหน้าที่เป็น server ของ protocal ซึ่งเรียกใช้การทำงานแบบ RPC"

#: services.pm:73
#, fuzzy, c-format
msgid ""
"Postfix is a Mail Transport Agent, which is the program that moves mail from "
"one machine to another."
msgstr ""
"Postfix เป็นโปรแกรมทำหน้าที่ส่งจดหมายจากเครื่องหนึ่ง\n"
"ไปอีกเครื่องหนึ่ง"

#: services.pm:74
#, c-format
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""

#: services.pm:76
#, c-format
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""

#: services.pm:78
#, c-format
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""

#: services.pm:81
#, c-format
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""

#: services.pm:83
#, c-format
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""

#: services.pm:85
#, c-format
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""

#: services.pm:87
#, fuzzy, c-format
msgid "Launch the sound system on your machine"
msgstr "รัน X-Window เมื่อเริ่มทำงาน"

#: services.pm:88
#, c-format
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""

#: services.pm:90
#, c-format
msgid "Load the drivers for your usb devices."
msgstr ""

#: services.pm:91
#, fuzzy, c-format
msgid "Starts the X Font Server (this is mandatory for XFree to run)."
msgstr "เริ่มและหยุด X Font Server ตอน boot และ เลิก"

#: services.pm:117 services.pm:159
#, c-format
msgid "Choose which services should be automatically started at boot time"
msgstr "เลือกการบริการที่ต้องการให้เริ่มตั้งแต่การเริ่มทำงานของเครื่อง"

#: services.pm:129
#, fuzzy, c-format
msgid "Printing"
msgstr "เครื่องพิมพ์"

#: services.pm:130
#, c-format
msgid "Internet"
msgstr "เฎ?เฏ?เฎฃเฎฏเฎฎเฎ?"

#: services.pm:133
#, c-format
msgid "File sharing"
msgstr ""

#: services.pm:140
#, fuzzy, c-format
msgid "Remote Administration"
msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"

#: services.pm:148
#, fuzzy, c-format
msgid "Database Server"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: services.pm:211
#, c-format
msgid "running"
msgstr "กำลังทำงาน"

#: services.pm:211
#, c-format
msgid "stopped"
msgstr "หยุด"

#: services.pm:215
#, c-format
msgid "Services and deamons"
msgstr ""

#: services.pm:221
#, c-format
msgid ""
"No additional information\n"
"about this service, sorry."
msgstr ""
"ไม่มีข้อมูลเพิ่มเติม\n"
"สำหรับการบริการนี้ ขอโทษครับ"

#: services.pm:226 ugtk2.pm:1176
#, c-format
msgid "Info"
msgstr "ข้อมูล"

#: services.pm:229
#, c-format
msgid "Start when requested"
msgstr ""

#: services.pm:229
#, c-format
msgid "On boot"
msgstr "ขณะ boot"

#: services.pm:244
#, fuzzy, c-format
msgid "Start"
msgstr "สถานะ:"

#: services.pm:244
#, fuzzy, c-format
msgid "Stop"
msgstr "เซ็กเตอร์"

#: share/advertising/dis-01.pl:13 share/advertising/dwd-01.pl:13
#: share/advertising/ppp-01.pl:13 share/advertising/pwp-01.pl:13
#, c-format
msgid "<b>Congratulations for choosing Mandrakelinux!</b>"
msgstr ""

#: share/advertising/dis-01.pl:15 share/advertising/dwd-01.pl:15
#: share/advertising/ppp-01.pl:15 share/advertising/pwp-01.pl:15
#, fuzzy, c-format
msgid "Welcome to the Open Source world!"
msgstr "ทดสอบการคอนฟิก"

#: share/advertising/dis-01.pl:17
#, c-format
msgid ""
"Your new Mandrakelinux operating system and its many applications is the "
"result of collaborative efforts between MandrakeSoft developers and "
"Mandrakelinux contributors throughout the world."
msgstr ""

#: share/advertising/dis-01.pl:19 share/advertising/dwd-01.pl:19
#: share/advertising/ppp-01.pl:19
#, c-format
msgid ""
"We would like to thank everyone who participated in the development of this "
"latest release."
msgstr ""

#: share/advertising/dis-02.pl:13
#, fuzzy, c-format
msgid "<b>Discovery</b>"
msgstr "Driver"

#: share/advertising/dis-02.pl:15
#, c-format
msgid ""
"Discovery is the easiest and most user-friendly Linux distribution. It "
"includes a hand-picked selection of premium software for Office, Multimedia "
"and Internet activities."
msgstr ""

#: share/advertising/dis-02.pl:17
#, c-format
msgid "The menu is task-oriented, with a single selected application per task."
msgstr ""

#: share/advertising/dis-03.pl:13
#, c-format
msgid "<b>The KDE Choice</b>"
msgstr ""

#: share/advertising/dis-03.pl:15
#, c-format
msgid ""
"The powerful Open Source graphical desktop environment KDE is the desktop of "
"choice for the Discovery Pack."
msgstr ""

#: share/advertising/dis-04.pl:13
#, c-format
msgid "<b>OpenOffice.org</b>: The complete Linux office suite."
msgstr ""

#: share/advertising/dis-04.pl:15
#, c-format
msgid ""
"<b>WRITER</b> is a powerful word processor for creating all types of text "
"documents. Documents may include images, diagrams and tables."
msgstr ""

#: share/advertising/dis-04.pl:16
#, c-format
msgid ""
"<b>CALC</b> is a feature-packed spreadsheet which enables you to compute, "
"analyze and manage all of your data."
msgstr ""

#: share/advertising/dis-04.pl:17
#, c-format
msgid ""
"<b>IMPRESS</b> is the fastest, most powerful way to create effective "
"multimedia presentations."
msgstr ""

#: share/advertising/dis-04.pl:18
#, c-format
msgid ""
"<b>DRAW</b> will produce everything from simple diagrams to dynamic 3D "
"illustrations."
msgstr ""

#: share/advertising/dis-05.pl:13 share/advertising/dis-06.pl:13
#, fuzzy, c-format
msgid "<b>Surf The Internet</b>"
msgstr "เฎ?เฏ?เฎฃเฎฏเฎฎเฎ?"

#: share/advertising/dis-05.pl:15
#, c-format
msgid "Discover the new integrated personal information suite KDE Kontact."
msgstr ""

#: share/advertising/dis-05.pl:17
#, c-format
msgid ""
"More than just a full-featured email client, <b>Kontact</b> also includes an "
"address book, a calendar and scheduling program, plus a tool for taking "
"notes!"
msgstr ""

#: share/advertising/dis-06.pl:15
#, c-format
msgid "You can also:"
msgstr ""

#: share/advertising/dis-06.pl:16
#, c-format
msgid "\t- browse the Web"
msgstr ""

#: share/advertising/dis-06.pl:17
#, c-format
msgid "\t- chat"
msgstr ""

#: share/advertising/dis-06.pl:18
#, c-format
msgid "\t- organize a video-conference"
msgstr ""

#: share/advertising/dis-06.pl:19
#, c-format
msgid "\t- create your own Web site"
msgstr ""

#: share/advertising/dis-06.pl:20
#, c-format
msgid "\t- ..."
msgstr ""

#: share/advertising/dis-07.pl:13
#, c-format
msgid "<b>Multimedia</b>: Software for every need!"
msgstr ""

#: share/advertising/dis-07.pl:15
#, c-format
msgid "Listen to audio CDs with <b>KsCD</b>."
msgstr ""

#: share/advertising/dis-07.pl:17
#, c-format
msgid "Listen to music files and watch videos with <b>Totem</b>."
msgstr ""

#: share/advertising/dis-07.pl:19
#, c-format
msgid "View and edit images and photos with <b>GQview</b> and <b>The Gimp!</b>"
msgstr ""

#: share/advertising/dis-08.pl:13 share/advertising/ppp-08.pl:13
#: share/advertising/pwp-07.pl:13
#, fuzzy, c-format
msgid "<b>Mandrake Control Center</b>"
msgstr "Control Center"

#: share/advertising/dis-08.pl:15 share/advertising/ppp-08.pl:15
#: share/advertising/pwp-07.pl:15
#, c-format
msgid ""
"The Mandrake Control Center is an essential collection of Mandrake-specific "
"utilities for simplifying the configuration of your computer."
msgstr ""

#: share/advertising/dis-08.pl:17 share/advertising/ppp-08.pl:17
#: share/advertising/pwp-07.pl:17
#, c-format
msgid ""
"You will immediately appreciate this collection of handy utilities for "
"easily configuring hardware devices, defining mount points, setting up "
"Network and Internet, adjusting the security level of your computer, and "
"just about everything related to the system."
msgstr ""

#: share/advertising/dis-09.pl:13 share/advertising/dwd-06.pl:13
#: share/advertising/ppp-09.pl:13 share/advertising/pwp-08.pl:13
#, fuzzy, c-format
msgid "<b>MandrakeStore</b>"
msgstr "Control Center"

#: share/advertising/dis-09.pl:15 share/advertising/ppp-09.pl:15
#: share/advertising/pwp-08.pl:15
#, c-format
msgid ""
"Find all MandrakeSoft products and services at <b>MandrakeStore</b> -- our "
"full service e-commerce platform."
msgstr ""

#: share/advertising/dis-09.pl:17 share/advertising/dwd-06.pl:19
#: share/advertising/ppp-09.pl:17 share/advertising/pwp-08.pl:17
#, c-format
msgid "Stop by today at <b>www.mandrakestore.com</b>"
msgstr ""

#: share/advertising/dis-10.pl:13 share/advertising/ppp-10.pl:13
#: share/advertising/pwp-09.pl:13
#, fuzzy, c-format
msgid "Become a <b>MandrakeClub</b> member!"
msgstr "แบบผู้เชี่ยวชาญ (Expert)"

#: share/advertising/dis-10.pl:15 share/advertising/dwd-07.pl:15
#: share/advertising/ppp-10.pl:15 share/advertising/pwp-09.pl:15
#, c-format
msgid ""
"Take advantage of valuable benefits, products and services by joining "
"MandrakeClub, such as:"
msgstr ""

#: share/advertising/dis-10.pl:16 share/advertising/dwd-07.pl:16
#: share/advertising/ppp-10.pl:17 share/advertising/pwp-09.pl:16
#, c-format
msgid "\t- Full access to commercial applications"
msgstr ""

#: share/advertising/dis-10.pl:17 share/advertising/dwd-07.pl:17
#: share/advertising/ppp-10.pl:18 share/advertising/pwp-09.pl:17
#, c-format
msgid "\t- Special download mirror list exclusively for MandrakeClub Members"
msgstr ""

#: share/advertising/dis-10.pl:18 share/advertising/dwd-07.pl:18
#: share/advertising/ppp-10.pl:19 share/advertising/pwp-09.pl:18
#, c-format
msgid "\t- Voting for software to put in Mandrakelinux"
msgstr ""

#: share/advertising/dis-10.pl:19 share/advertising/dwd-07.pl:19
#: share/advertising/ppp-10.pl:20 share/advertising/pwp-09.pl:19
#, c-format
msgid "\t- Special discounts for products and services at MandrakeStore"
msgstr ""

#: share/advertising/dis-10.pl:20 share/advertising/dwd-07.pl:20
#: share/advertising/ppp-04.pl:21 share/advertising/ppp-06.pl:19
#: share/advertising/ppp-10.pl:21 share/advertising/pwp-04.pl:21
#: share/advertising/pwp-09.pl:20
#, c-format
msgid "\t- Plus much more"
msgstr ""

#: share/advertising/dis-10.pl:22 share/advertising/dwd-07.pl:22
#: share/advertising/ppp-10.pl:23 share/advertising/pwp-09.pl:22
#, c-format
msgid "For more information, please visit <b>www.mandrakeclub.com</b>"
msgstr ""

#: share/advertising/dis-11.pl:13
#, fuzzy, c-format
msgid "Do you require assistance?"
msgstr "คุณมีอินเทอร์เฟส %s จำนวนเท่าไหร่?"

#: share/advertising/dis-11.pl:15 share/advertising/dwd-08.pl:16
#: share/advertising/ppp-11.pl:15 share/advertising/pwp-10.pl:15
#, c-format
msgid "<b>MandrakeExpert</b> is the primary source for technical support."
msgstr ""

#: share/advertising/dis-11.pl:17 share/advertising/dwd-08.pl:18
#: share/advertising/ppp-11.pl:17 share/advertising/pwp-10.pl:17
#, c-format
msgid ""
"If you have Linux questions, subscribe to MandrakeExpert at <b>www."
"mandrakeexpert.com</b>"
msgstr ""

#: share/advertising/dwd-01.pl:17
#, c-format
msgid ""
"Mandrakelinux is committed to the Open Source Model and fully respects the "
"General Public License. This new release is the result of collaboration "
"between MandrakeSoft's team of developers and the worldwide community of "
"Mandrakelinux contributors."
msgstr ""

#: share/advertising/dwd-02.pl:13
#, c-format
msgid "<b>Join the Mandrakelinux community!</b>"
msgstr ""

#: share/advertising/dwd-02.pl:15
#, c-format
msgid ""
"If you would like to get involved, please subscribe to the \"Cooker\" "
"mailing list by visiting <b>mandrake-linux.com/cooker</b>"
msgstr ""

#: share/advertising/dwd-02.pl:17
#, c-format
msgid ""
"To learn more about our dynamic community, please visit <b>www.mandrake-"
"linux.com</b>!"
msgstr ""

#: share/advertising/dwd-03.pl:13
#, c-format
msgid "<b>What is Mandrakelinux?</b>"
msgstr ""

#: share/advertising/dwd-03.pl:15
#, c-format
msgid ""
"Mandrakelinux is an Open Source distribution created with thousands of the "
"choicest applications from the Free Software world. Mandrakelinux is one of "
"the most widely used Linux distributions worldwide!"
msgstr ""

#: share/advertising/dwd-03.pl:17
#, c-format
msgid ""
"Mandrakelinux includes the famous graphical desktops KDE and GNOME, plus the "
"latest versions of the most popular Open Source applications."
msgstr ""

#: share/advertising/dwd-04.pl:13
#, c-format
msgid ""
"Mandrakelinux is widely known as the most user-friendly and the easiest to "
"install and easy to use Linux distribution."
msgstr ""

#: share/advertising/dwd-04.pl:15
#, c-format
msgid "Find out about our <b>Personal Solutions</b>:"
msgstr ""

#: share/advertising/dwd-04.pl:16
#, c-format
msgid "\t- Find out Mandrakelinux on a bootable CD with <b>MandrakeMove</b>"
msgstr ""

#: share/advertising/dwd-04.pl:17
#, c-format
msgid ""
"\t- If you use Linux mostly for Office, Internet and Multimedia tasks, "
"<b>Discovery</b> perfectly meets your needs"
msgstr ""

#: share/advertising/dwd-04.pl:18
#, c-format
msgid ""
"\t- If you appreciate the largest selection of software including powerful "
"development tools, <b>PowerPack</b> is for you"
msgstr ""

#: share/advertising/dwd-04.pl:19
#, c-format
msgid ""
"\t- If you require a full-featured Linux solution customized for small to "
"medium-sized networks, choose <b>PowerPack+</b>"
msgstr ""

#: share/advertising/dwd-05.pl:13
#, c-format
msgid "Find out also our <b>Business Solutions</b>!"
msgstr ""

#: share/advertising/dwd-05.pl:15
#, c-format
msgid ""
"<b>Corporate Server</b>: the ideal solution for entreprises. It is a "
"complete \"all-in-one\" solution that includes everything needed to rapidly "
"deploy world-class Linux server applications."
msgstr ""

#: share/advertising/dwd-05.pl:17
#, c-format
msgid ""
"<b>Multi Network Firewall</b>: based on Linux 2.4 \"kernel secure\" to "
"provide multi-VPN as well as multi-DMZ functionalities. It is the perfect "
"high performance security solution."
msgstr ""

#: share/advertising/dwd-05.pl:19
#, c-format
msgid ""
"<b>MandrakeClustering</b>: the power and speed of a Linux cluster combined "
"with the stability and easy-of-use of the world-famous Mandrakelinux "
"distribution. A unique blend for incomparable HPC performance."
msgstr ""

#: share/advertising/dwd-06.pl:15
#, c-format
msgid ""
"Find all MandrakeSoft products at <b>MandrakeStore</b> -- our full service e-"
"commerce platform."
msgstr ""

#: share/advertising/dwd-06.pl:17
#, c-format
msgid ""
"Find out also support incidents if you have any problems, from standard to "
"professional support, from 1 to 50 incidents, take the one which meets "
"perfectly your needs!"
msgstr ""

#: share/advertising/dwd-07.pl:13
#, fuzzy, c-format
msgid "<b>Become a MandrakeClub member!</b>"
msgstr "แบบผู้เชี่ยวชาญ (Expert)"

#: share/advertising/dwd-08.pl:14 share/advertising/ppp-11.pl:13
#: share/advertising/pwp-10.pl:13
#, fuzzy, c-format
msgid "<b>Do you require assistance?</b>"
msgstr "คุณมีอินเทอร์เฟส %s จำนวนเท่าไหร่?"

#: share/advertising/dwd-09.pl:16
#, c-format
msgid "<b>Note</b>"
msgstr ""

#: share/advertising/dwd-09.pl:18
#, c-format
msgid "This is the Mandrakelinux <b>Download version</b>."
msgstr ""

#: share/advertising/dwd-09.pl:20
#, c-format
msgid ""
"The free download version does not include commercial software, and "
"therefore may not work with certain modems (such as some ADSL and RTC) and "
"video cards (such as ATI® and NVIDIA®)."
msgstr ""

#: share/advertising/ppp-01.pl:17
#, c-format
msgid ""
"Your new Mandrakelinux distribution and its many applications are the result "
"of collaborative efforts between MandrakeSoft developers and Mandrakelinux "
"contributors throughout the world."
msgstr ""

#: share/advertising/ppp-02.pl:13
#, c-format
msgid "<b>PowerPack+</b>"
msgstr ""

#: share/advertising/ppp-02.pl:15
#, c-format
msgid ""
"PowerPack+ is a full-featured Linux solution for small to medium-sized "
"networks. PowerPack+ increases the value of the standard PowerPack by adding "
"a comprehensive selection of world-class server applications."
msgstr ""

#: share/advertising/ppp-02.pl:17
#, c-format
msgid ""
"It is the only Mandrakelinux product that includes the groupware solution."
msgstr ""

#: share/advertising/ppp-03.pl:13 share/advertising/pwp-03.pl:13
#, fuzzy, c-format
msgid "<b>Choose your graphical Desktop environment!</b>"
msgstr "Graphical Desktops อื่นๆ"

#: share/advertising/ppp-03.pl:15 share/advertising/pwp-03.pl:15
#, c-format
msgid ""
"When you log into your Mandrakelinux system for the first time, you can "
"choose between several popular graphical desktops environments, including: "
"KDE, GNOME, WindowMaker, IceWM, and others."
msgstr ""

#: share/advertising/ppp-04.pl:13
#, c-format
msgid ""
"In the Mandrakelinux menu you will find easy-to-use applications for all "
"tasks:"
msgstr ""

#: share/advertising/ppp-04.pl:15 share/advertising/pwp-04.pl:15
#, c-format
msgid "\t- Create, edit and share office documents with <b>OpenOffice.org</b>"
msgstr ""

#: share/advertising/ppp-04.pl:16
#, c-format
msgid ""
"\t- Take charge of your personal data with the integrated personal "
"information suites: <b>Kontact</b> and <b>Evolution</b>"
msgstr ""

#: share/advertising/ppp-04.pl:17
#, c-format
msgid "\t- Browse the Web with <b>Mozilla and Konqueror</b>"
msgstr ""

#: share/advertising/ppp-04.pl:18 share/advertising/pwp-04.pl:18
#, c-format
msgid "\t- Participate in online chat with <b>Kopete</b>"
msgstr ""

#: share/advertising/ppp-04.pl:19
#, c-format
msgid ""
"\t- Listen to audio CDs and music files with <b>KsCD</b> and <b>Totem</b>"
msgstr ""

#: share/advertising/ppp-04.pl:20 share/advertising/pwp-04.pl:20
#, c-format
msgid "\t- Edit images and photos with <b>The Gimp</b>"
msgstr ""

#: share/advertising/ppp-05.pl:13
#, c-format
msgid ""
"PowerPack+ includes everything needed for developing and creating your own "
"software, including:"
msgstr ""

#: share/advertising/ppp-05.pl:15 share/advertising/pwp-05.pl:16
#, c-format
msgid ""
"\t- <b>Kdevelop</b>: a full featured, easy to use Integrated Development "
"Environment for C++ programming"
msgstr ""

#: share/advertising/ppp-05.pl:16 share/advertising/pwp-05.pl:17
#, c-format
msgid "\t- <b>GCC</b>: the GNU Compiler Collection"
msgstr ""

#: share/advertising/ppp-05.pl:17 share/advertising/pwp-05.pl:18
#, c-format
msgid "\t- <b>GDB</b>: the GNU Project debugger"
msgstr ""

#: share/advertising/ppp-05.pl:18 share/advertising/pwp-06.pl:16
#, c-format
msgid "\t- <b>Emacs</b>: a customizable and real time display editor"
msgstr ""

#: share/advertising/ppp-05.pl:19
#, c-format
msgid ""
"\t- <b>Xemacs</b>: open source text editor and application development system"
msgstr ""

#: share/advertising/ppp-05.pl:20
#, c-format
msgid ""
"\t- <b>Vim</b>: advanced text editor with more features than standard Vi"
msgstr ""

#: share/advertising/ppp-06.pl:13
#, c-format
msgid "<b>Discover the full-featured groupware solution!</b>"
msgstr ""

#: share/advertising/ppp-06.pl:15
#, c-format
msgid "It includes both server and client features for:"
msgstr ""

#: share/advertising/ppp-06.pl:16
#, c-format
msgid "\t- Sending and receiving emails"
msgstr ""

#: share/advertising/ppp-06.pl:17
#, c-format
msgid ""
"\t- Calendar, Task List, Memos, Contacts, Meeting Request (sending and "
"receiving), Task Requests (sending and receiving)"
msgstr ""

#: share/advertising/ppp-06.pl:18
#, c-format
msgid "\t- Address Book (server and client)"
msgstr ""

#: share/advertising/ppp-07.pl:13
#, c-format
msgid ""
"Empower your business network with <b>premier server solutions</b> including:"
msgstr ""

#: share/advertising/ppp-07.pl:15
#, c-format
msgid "\t- <b>Samba</b>: File and print services for MS-Windows clients"
msgstr ""

#: share/advertising/ppp-07.pl:16
#, c-format
msgid "\t- <b>Apache</b>: The most widely used Web server"
msgstr ""

#: share/advertising/ppp-07.pl:17
#, c-format
msgid "\t- <b>MySQL</b>: The world's most popular Open Source database"
msgstr ""

#: share/advertising/ppp-07.pl:18
#, c-format
msgid ""
"\t- <b>CVS</b>: Concurrent Versions System, the dominant open-source network-"
"transparent version control system"
msgstr ""

#: share/advertising/ppp-07.pl:19
#, c-format
msgid ""
"\t- <b>ProFTPD</b>: the highly configurable GPL-licensed FTP server software"
msgstr ""

#: share/advertising/ppp-07.pl:20
#, c-format
msgid "\t- And others"
msgstr ""

#: share/advertising/pwp-01.pl:17
#, c-format
msgid ""
"Your new Mandrakelinux distribution is the result of collaborative efforts "
"between MandrakeSoft developers and Mandrakelinux contributors throughout "
"the world."
msgstr ""

#: share/advertising/pwp-01.pl:19
#, c-format
msgid ""
"We would like to thank everyone who participated in the development of our "
"latest release."
msgstr ""

#: share/advertising/pwp-02.pl:13
#, c-format
msgid "<b>PowerPack</b>"
msgstr ""

#: share/advertising/pwp-02.pl:15
#, c-format
msgid ""
"PowerPack is MandrakeSoft's premier Linux desktop product. In addition to "
"being the easiest and the most user-friendly Linux distribution, PowerPack "
"includes thousands of applications - everything from the most popular to the "
"most technical."
msgstr ""

#: share/advertising/pwp-04.pl:13
#, c-format
msgid ""
"In the Mandrakelinux menu you will find easy-to-use applications for all of "
"your tasks:"
msgstr ""

#: share/advertising/pwp-04.pl:16
#, c-format
msgid ""
"\t- Take charge of your personal data with the integrated personal "
"information suites <b>Kontact</b> and <b>Evolution</b>"
msgstr ""

#: share/advertising/pwp-04.pl:17
#, c-format
msgid "\t- Browse the Web with <b>Mozilla</b> and <b>Konqueror</b>"
msgstr ""

#: share/advertising/pwp-04.pl:19
#, c-format
msgid "\t- Listen to audio CDs and music files with KsCD and <b>Totem</b>"
msgstr ""

#: share/advertising/pwp-05.pl:13 share/advertising/pwp-06.pl:13
#, fuzzy, c-format
msgid "<b>Development tools</b>"
msgstr "พัฒนาซอฟท์แวร์ (Development)"

#: share/advertising/pwp-05.pl:15
#, c-format
msgid ""
"PowerPack includes everything needed for developing and creating your own "
"software, including:"
msgstr ""

#: share/advertising/pwp-06.pl:15
#, c-format
msgid "And of course the editors!"
msgstr ""

#: share/advertising/pwp-06.pl:17
#, c-format
msgid ""
"\t- <b>Xemacs</b>: another open source text editor and application "
"development system"
msgstr ""

#: share/advertising/pwp-06.pl:18
#, c-format
msgid ""
"\t- <b>Vim</b>: an advanced text editor with more features than standard Vi"
msgstr ""

#: standalone.pm:21
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2, or (at your option)\n"
"any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""

#: standalone.pm:40
#, c-format
msgid ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Backup and Restore application\n"
"\n"
"--default             : save default directories.\n"
"--debug               : show all debug messages.\n"
"--show-conf           : list of files or directories to backup.\n"
"--config-info         : explain configuration file options (for non-X "
"users).\n"
"--daemon              : use daemon configuration. \n"
"--help                : show this message.\n"
"--version             : show version number.\n"
msgstr ""

#: standalone.pm:52
#, c-format
msgid ""
"[--boot] [--splash]\n"
"OPTIONS:\n"
"  --boot            - enable to configure boot loader\n"
"  --splash          - enable to configure boot theme\n"
"default mode: offer to configure autologin feature"
msgstr ""

#: standalone.pm:57
#, c-format
msgid ""
"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPTIONS:\n"
"  --help            - print this help message.\n"
"  --report          - program should be one of mandrake tools\n"
"  --incident        - program should be one of mandrake tools"
msgstr ""

#: standalone.pm:63
#, c-format
msgid ""
"[--add]\n"
"  --add             - \"add a network interface\" wizard\n"
"  --del             - \"delete a network interface\" wizard\n"
"  --skip-wizard     - manage connections\n"
"  --internet        - configure internet\n"
"  --wizard          - like --add"
msgstr ""

#: standalone.pm:69
#, c-format
msgid ""
"\n"
"Font Importation and monitoring application\n"
"\n"
"OPTIONS:\n"
"--windows_import : import from all available windows partitions.\n"
"--xls_fonts      : show all fonts that already exist from xls\n"
"--install        : accept any font file and any directry.\n"
"--uninstall      : uninstall any font or any directory of font.\n"
"--replace        : replace all font if already exist\n"
"--application    : 0 none application.\n"
"                 : 1 all application available supported.\n"
"                 : name_of_application like  so for staroffice \n"
"                 : and gs for ghostscript for only this one."
msgstr ""

#: standalone.pm:84
#, c-format
msgid ""
"[OPTIONS]...\n"
"Mandrake Terminal Server Configurator\n"
"--enable         : enable MTS\n"
"--disable        : disable MTS\n"
"--start          : start MTS\n"
"--stop           : stop MTS\n"
"--adduser        : add an existing system user to MTS (requires username)\n"
"--deluser        : delete an existing system user from MTS (requires "
"username)\n"
"--addclient      : add a client machine to MTS (requires MAC address, IP, "
"nbi image name)\n"
"--delclient      : delete a client machine from MTS (requires MAC address, "
"IP, nbi image name)"
msgstr ""

#: standalone.pm:96
#, fuzzy, c-format
msgid "[keyboard]"
msgstr "คีย์บอร์ด"

#: standalone.pm:97
#, c-format
msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""

#: standalone.pm:98
#, c-format
msgid ""
"[OPTIONS]\n"
"Network & Internet connection and monitoring application\n"
"\n"
"--defaultintf interface : show this interface by default\n"
"--connect : connect to internet if not already connected\n"
"--disconnect : disconnect to internet if already connected\n"
"--force : used with (dis)connect : force (dis)connection.\n"
"--status : returns 1 if connected 0 otherwise, then exit.\n"
"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""

#: standalone.pm:107
#, c-format
msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""

#: standalone.pm:108
#, c-format
msgid ""
"[OPTION]...\n"
"  --no-confirmation      don't ask first confirmation question in "
"MandrakeUpdate mode\n"
"  --no-verify-rpm        don't verify packages signatures\n"
"  --changelog-first      display changelog before filelist in the "
"description window\n"
"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
msgstr ""

#: standalone.pm:113
#, c-format
msgid ""
"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=dev]"
msgstr ""

#: standalone.pm:114
#, c-format
msgid ""
" [everything]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake resolution"
msgstr ""

#: standalone.pm:128
#, c-format
msgid ""
"\n"
"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "
msgstr ""

#: standalone/XFdrake:87
#, c-format
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "กรุณาออกไปและใช้ Ctrl-Alt-BackSpace"

#: standalone/XFdrake:91
#, c-format
msgid "You need to log out and back in again for changes to take effect"
msgstr ""

#: standalone/drakTermServ:79
#, c-format
msgid "Useless without Terminal Server"
msgstr ""

#: standalone/drakTermServ:116 standalone/drakTermServ:123
#, c-format
msgid "%s: %s requires a username...\n"
msgstr ""

#: standalone/drakTermServ:136
#, c-format
msgid ""
"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
"0/1 for Local Config...\n"
msgstr ""

#: standalone/drakTermServ:143
#, c-format
msgid "%s: %s requires hostname...\n"
msgstr ""

#: standalone/drakTermServ:226 standalone/drakTermServ:500
#: standalone/drakfont:575
#, c-format
msgid "OK"
msgstr "OK"

#: standalone/drakTermServ:237 standalone/drakTermServ:240
#, fuzzy, c-format
msgid "Terminal Server Configuration"
msgstr "การคอนฟิก Internet"

#: standalone/drakTermServ:255
#, fuzzy, c-format
msgid "Enable Server"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: standalone/drakTermServ:261
#, fuzzy, c-format
msgid "Disable Server"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: standalone/drakTermServ:269
#, fuzzy, c-format
msgid "Start Server"
msgstr "เซิร์ฟเวอร์ NIS"

#: standalone/drakTermServ:275
#, fuzzy, c-format
msgid "Stop Server"
msgstr "เซิร์ฟเวอร์ NIS"

#: standalone/drakTermServ:283
#, c-format
msgid "Etherboot Floppy/ISO"
msgstr ""

#: standalone/drakTermServ:287
#, c-format
msgid "Net Boot Images"
msgstr ""

#: standalone/drakTermServ:293
#, fuzzy, c-format
msgid "Add/Del Users"
msgstr "เพิ่มผู้ใช้"

#: standalone/drakTermServ:297
#, fuzzy, c-format
msgid "Add/Del Clients"
msgstr "DHCP Client"

#: standalone/drakTermServ:308 standalone/drakbug:54
#, c-format
msgid "First Time Wizard"
msgstr ""

#: standalone/drakTermServ:340 standalone/drakTermServ:341
#, c-format
msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
msgstr ""

#: standalone/drakTermServ:347
#, c-format
msgid ""
"\n"
" This wizard routine will:\n"
" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
"\t2) Setup dhcp.\n"
"\t\n"
"After doing these steps, the wizard will:\n"
"\t\n"
"    a) Make all "
"nbis.                                                                \n"
"    b) Activate the "
"server.                                                          \n"
"    c) Start the "
"server.                                                     \n"
"    d) Synchronize the shadow files so that all users, including root, \n"
"       are added to the shadow$$CLIENT$$ "
"file.                                              \n"
"    e) Ask you to make a boot floppy.\n"
"    f) If it's thin clients, ask if you want to restart KDM.\n"
msgstr ""

#: standalone/drakTermServ:392
#, fuzzy, c-format
msgid "Cancel Wizard"
msgstr "Wizard"

#: standalone/drakTermServ:404
#, c-format
msgid "Please save dhcpd config!"
msgstr ""

#: standalone/drakTermServ:432
#, fuzzy, c-format
msgid "Use thin clients."
msgstr "DHCP Client"

#: standalone/drakTermServ:434
#, c-format
msgid ""
"Please select default client type.\n"
"    'Thin' clients run everything off the server's CPU/RAM, using the client "
"display.\n"
"    'Fat' clients use their own CPU/RAM but the server's filesystem."
msgstr ""

#: standalone/drakTermServ:446 standalone/drakTermServ:1061
#, c-format
msgid "Sync client X keyboard settings with server."
msgstr ""

#: standalone/drakTermServ:453
#, c-format
msgid "Creating net boot images for all kernels"
msgstr ""

#: standalone/drakTermServ:454 standalone/drakTermServ:753
#: standalone/drakTermServ:769
#, c-format
msgid "This will take a few minutes."
msgstr ""

#: standalone/drakTermServ:458 standalone/drakTermServ:478
#, fuzzy, c-format
msgid "Done!"
msgstr "ทำเรียบร้อยแล้ว"

#: standalone/drakTermServ:464
#, c-format
msgid "Syncing server user list with client list, including root."
msgstr ""

#: standalone/drakTermServ:484
#, c-format
msgid ""
"In order to enable changes made for thin clients, the display manager must "
"be restarted. Restart now?"
msgstr ""

#: standalone/drakTermServ:519
#, fuzzy, c-format
msgid "Terminal Server Overview"
msgstr "การคอนฟิก Internet"

#: standalone/drakTermServ:520
#, c-format
msgid ""
"        - Create Etherboot Enabled Boot Images:\n"
"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
"be created.\n"
"        \tmkinitrd-net does much of this work and drakTermServ is just a "
"graphical \n"
"        \tinterface to help manage/customize these images. To create the "
"file \n"
"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
"include in \n"
"        \tdhcpd.conf, you should create the etherboot images for at least "
"one full kernel."
msgstr ""

#: standalone/drakTermServ:526
#, c-format
msgid ""
"        - Maintain /etc/dhcpd.conf:\n"
"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
"assigning an IP \n"
"        \taddress and net boot images to the machine. drakTermServ helps "
"create/remove \n"
"        \tthese entries.\n"
"\t\t\t\n"
"        \t(PCI cards may omit the image - etherboot will request the correct "
"image. \n"
"\t\t\tYou should also consider that when etherboot looks for the images, it "
"expects \n"
"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
"\t\t\t \n"
"        \tA typical dhcpd.conf stanza to support a diskless client looks "
"like:"
msgstr ""

#: standalone/drakTermServ:544
#, c-format
msgid ""
"        While you can use a pool of IP addresses, rather than setup a "
"specific entry for\n"
"        a client machine, using a fixed address scheme facilitates using the "
"functionality\n"
"        of client-specific configuration files that ClusterNFS provides.\n"
"\t\t\t\n"
"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
"either be 'thin'\n"
"        or 'fat'.  Thin clients run most software on the server via xdmcp, "
"while fat clients run \n"
"        most software on the client machine. A special inittab, %s is\n"
"        written for thin clients. System config files xdm-config, kdmrc, and "
"gdm.conf are \n"
"        modified if thin clients are used, to enable xdmcp. Since there are "
"security issues in \n"
"        using xdmcp, hosts.deny and hosts.allow are modified to limit access "
"to the local\n"
"        subnet.\n"
"\t\t\t\n"
"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
"Clients can either \n"
"        be 'true' or 'false'.  'true' enables root login at the client "
"machine and allows local \n"
"        hardware configuration of sound, mouse, and X, using the 'drak' "
"tools. This is enabled \n"
"        by creating separate config files associated with the client's IP "
"address and creating \n"
"        read/write mount points to allow the client to alter the file. Once "
"you are satisfied \n"
"        with the configuration, you can remove root login privileges from "
"the client.\n"
"\t\t\t\n"
"        Note: You must stop/start the server after adding or changing "
"clients."
msgstr ""

#: standalone/drakTermServ:564
#, c-format
msgid ""
"        - Maintain /etc/exports:\n"
"        \tClusternfs allows export of the root filesystem to diskless "
"clients. drakTermServ\n"
"        \tsets up the correct entry to allow anonymous access to the root "
"filesystem from\n"
"        \tdiskless clients.\n"
"\n"
"        \tA typical exports entry for clusternfs is:\n"
"        \t\t\n"
"        \t/\t\t\t\t\t(ro,all_squash)\n"
"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
"\t\t\t\n"
"        \tWith SUBNET/MASK being defined for your network."
msgstr ""

#: standalone/drakTermServ:576
#, c-format
msgid ""
"        - Maintain %s:\n"
"        \tFor users to be able to log into the system from a diskless "
"client, their entry in\n"
"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
"        \thelps in this respect by adding or removing system users from this "
"file."
msgstr ""

#: standalone/drakTermServ:580
#, c-format
msgid ""
"        - Per client %s:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tdrakTermServ will help create these files."
msgstr ""

#: standalone/drakTermServ:585
#, c-format
msgid ""
"        - Per client system configuration files:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tclients can customize files such as /etc/modules.conf, /etc/"
"sysconfig/mouse, \n"
"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
"\n"
"        Note: Enabling local client hardware configuration does enable root "
"login to the terminal \n"
"        server on each client machine that has this feature enabled.  Local "
"configuration can be\n"
"        turned back off, retaining the configuration files, once the client "
"machine is configured."
msgstr ""

#: standalone/drakTermServ:594
#, c-format
msgid ""
"        - /etc/xinetd.d/tftp:\n"
"        \tdrakTermServ will configure this file to work in conjunction with "
"the images created\n"
"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
"the boot image to \n"
"        \teach diskless client.\n"
"\n"
"        \tA typical tftp configuration file looks like:\n"
"        \t\t\n"
"        \tservice tftp\n"
"\t\t\t{\n"
"                        disable         = no\n"
"                        socket_type  = dgram\n"
"                        protocol        = udp\n"
"                        wait             = yes\n"
"                        user             = root\n"
"                        server          = /usr/sbin/in.tftpd\n"
"                        server_args  = -s /var/lib/tftpboot\n"
"        \t}\n"
"        \t\t\n"
"        \tThe changes here from the default installation are changing the "
"disable flag to\n"
"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
"mkinitrd-net\n"
"        \tputs its images."
msgstr ""

#: standalone/drakTermServ:615
#, c-format
msgid ""
"        - Create etherboot floppies/CDs:\n"
"        \tThe diskless client machines need either ROM images on the NIC, or "
"a boot floppy\n"
"        \tor CD to initate the boot sequence.  drakTermServ will help "
"generate these\n"
"        \timages, based on the NIC in the client machine.\n"
"        \t\t\n"
"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
"manually:\n"
"        \t\t\n"
"        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
"        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
"        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
msgstr ""

#: standalone/drakTermServ:650
#, c-format
msgid "Boot Floppy"
msgstr ""

#: standalone/drakTermServ:652
#, c-format
msgid "Boot ISO"
msgstr ""

#: standalone/drakTermServ:654
#, fuzzy, c-format
msgid "PXE Image"
msgstr "Image"

#: standalone/drakTermServ:723
#, fuzzy, c-format
msgid "Default kernel version"
msgstr "kernel version"

#: standalone/drakTermServ:751
#, c-format
msgid "Build Whole Kernel -->"
msgstr ""

#: standalone/drakTermServ:758
#, c-format
msgid "No kernel selected!"
msgstr ""

#: standalone/drakTermServ:761
#, c-format
msgid "Build Single NIC -->"
msgstr ""

#: standalone/drakTermServ:765
#, fuzzy, c-format
msgid "No NIC selected!"
msgstr "ไม่เชื่อมต่อ"

#: standalone/drakTermServ:768
#, c-format
msgid "Build All Kernels -->"
msgstr ""

#: standalone/drakTermServ:776
#, fuzzy, c-format
msgid "<-- Delete"
msgstr "ลบ"

#: standalone/drakTermServ:783
#, fuzzy, c-format
msgid "Delete All NBIs"
msgstr "เลือกไฟล์"

#: standalone/drakTermServ:870
#, c-format
msgid ""
"!!! Indicates the password in the system database is different than\n"
" the one in the Terminal Server database.\n"
"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""

#: standalone/drakTermServ:875
#, fuzzy, c-format
msgid "Add User -->"
msgstr "เพิ่มผู้ใช้"

#: standalone/drakTermServ:881
#, c-format
msgid "<-- Del User"
msgstr ""

#: standalone/drakTermServ:917
#, fuzzy, c-format
msgid "type: %s"
msgstr "ประเภท: "

#: standalone/drakTermServ:921
#, c-format
msgid "local config: %s"
msgstr ""

#: standalone/drakTermServ:951
#, fuzzy, c-format
msgid ""
"Allow local hardware\n"
"configuration."
msgstr "Boot Style Configuration"

#: standalone/drakTermServ:960
#, c-format
msgid "No net boot images created!"
msgstr ""

#: standalone/drakTermServ:978
#, fuzzy, c-format
msgid "Thin Client"
msgstr "DHCP Client"

#: standalone/drakTermServ:982
#, fuzzy, c-format
msgid "Allow Thin Clients"
msgstr "DHCP Client"

#: standalone/drakTermServ:983
#, c-format
msgid "Add Client -->"
msgstr ""

#: standalone/drakTermServ:997
#, fuzzy, c-format
msgid "type: fat"
msgstr "ประเภท: "

#: standalone/drakTermServ:998
#, fuzzy, c-format
msgid "type: thin"
msgstr "ประเภท: "

#: standalone/drakTermServ:1005
#, fuzzy, c-format
msgid "local config: false"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/drakTermServ:1006
#, fuzzy, c-format
msgid "local config: true"
msgstr "คอนฟิกใหม่"

#: standalone/drakTermServ:1014
#, fuzzy, c-format
msgid "<-- Edit Client"
msgstr "DHCP Client"

#: standalone/drakTermServ:1040
#, c-format
msgid "Disable Local Config"
msgstr ""

#: standalone/drakTermServ:1047
#, fuzzy, c-format
msgid "Delete Client"
msgstr "DHCP Client"

#: standalone/drakTermServ:1056
#, fuzzy, c-format
msgid "dhcpd Config..."
msgstr "กำลังทำการคอนฟิก"

#: standalone/drakTermServ:1072
#, c-format
msgid ""
"Need to restart the Display Manager for full changes to take effect. \n"
"(service dm restart - at the console)"
msgstr ""

#: standalone/drakTermServ:1112
#, c-format
msgid "Thin clients won't work with autologin. Disable autologin?"
msgstr ""

#: standalone/drakTermServ:1128
#, c-format
msgid "All clients will use %s"
msgstr ""

#: standalone/drakTermServ:1160
#, c-format
msgid "Subnet:"
msgstr ""

#: standalone/drakTermServ:1167
#, fuzzy, c-format
msgid "Netmask:"
msgstr "เน็ตมาสก์"

#: standalone/drakTermServ:1174
#, c-format
msgid "Routers:"
msgstr ""

#: standalone/drakTermServ:1181
#, c-format
msgid "Subnet Mask:"
msgstr ""

#: standalone/drakTermServ:1188
#, c-format
msgid "Broadcast Address:"
msgstr ""

#: standalone/drakTermServ:1195
#, fuzzy, c-format
msgid "Domain Name:"
msgstr "ชื่อโดเมน"

#: standalone/drakTermServ:1203
#, fuzzy, c-format
msgid "Name Servers:"
msgstr "เซิร์ฟเวอร์ NIS"

#: standalone/drakTermServ:1214
#, c-format
msgid "IP Range Start:"
msgstr ""

#: standalone/drakTermServ:1215
#, c-format
msgid "IP Range End:"
msgstr ""

#: standalone/drakTermServ:1257
#, c-format
msgid "Append TS Includes To Existing Config"
msgstr ""

#: standalone/drakTermServ:1259
#, fuzzy, c-format
msgid "Write Config"
msgstr "คอนฟิกใหม่"

#: standalone/drakTermServ:1275
#, fuzzy, c-format
msgid "dhcpd Server Configuration"
msgstr "การปรับแต่ง LAN"

#: standalone/drakTermServ:1276
#, c-format
msgid ""
"Most of these values were extracted\n"
"from your running system.\n"
"You can modify as needed."
msgstr ""

#: standalone/drakTermServ:1279
#, c-format
msgid "Dynamic IP Address Pool:"
msgstr ""

#: standalone/drakTermServ:1426
#, fuzzy, c-format
msgid "Please insert floppy disk:"
msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"

#: standalone/drakTermServ:1430
#, c-format
msgid "Couldn't access the floppy!"
msgstr ""

#: standalone/drakTermServ:1432
#, c-format
msgid "Floppy can be removed now"
msgstr ""

#: standalone/drakTermServ:1435
#, fuzzy, c-format
msgid "No floppy drive available!"
msgstr "ไม่มีไดรว์ฟล้อปปี็เหลืออยู่"

#: standalone/drakTermServ:1440
#, c-format
msgid "PXE image is %s/%s"
msgstr ""

#: standalone/drakTermServ:1442
#, fuzzy, c-format
msgid "Error writing %s/%s"
msgstr "ข้อผิดพลาดถูกบันทึกในไฟล์ %s"

#: standalone/drakTermServ:1451
#, c-format
msgid "Etherboot ISO image is %s"
msgstr ""

#: standalone/drakTermServ:1453
#, c-format
msgid "Something went wrong! - Is mkisofs installed?"
msgstr ""

#: standalone/drakTermServ:1475
#, c-format
msgid "Need to create /etc/dhcpd.conf first!"
msgstr ""

#: standalone/drakTermServ:1634
#, c-format
msgid "%s passwd bad in Terminal Server - rewriting...\n"
msgstr ""

#: standalone/drakTermServ:1647
#, fuzzy, c-format
msgid "%s is not a user..\n"
msgstr "ไม่พบการ์ดเน็ตเวิร์ก"

#: standalone/drakTermServ:1648
#, c-format
msgid "%s is already a Terminal Server user\n"
msgstr ""

#: standalone/drakTermServ:1650
#, c-format
msgid "Addition of %s to Terminal Server failed!\n"
msgstr ""

#: standalone/drakTermServ:1652
#, c-format
msgid "%s added to Terminal Server\n"
msgstr ""

#: standalone/drakTermServ:1698
#, fuzzy, c-format
msgid "Deleted %s...\n"
msgstr "ค้นพบ %s"

#: standalone/drakTermServ:1700 standalone/drakTermServ:1773
#, fuzzy, c-format
msgid "%s not found...\n"
msgstr "ไม่พบการ์ดเน็ตเวิร์ก"

#: standalone/drakTermServ:1722 standalone/drakTermServ:1723
#: standalone/drakTermServ:1724
#, c-format
msgid "%s already in use\n"
msgstr ""

#: standalone/drakTermServ:1801
#, c-format
msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr ""

#: standalone/drakTermServ:1953
#, c-format
msgid "Configuration changed - restart clusternfs/dhcpd?"
msgstr ""

#: standalone/drakautoinst:38
#, fuzzy, c-format
msgid "Error!"
msgstr "ผิดพลาด"

#: standalone/drakautoinst:39
#, c-format
msgid "I can't find needed image file `%s'."
msgstr ""

#: standalone/drakautoinst:41
#, fuzzy, c-format
msgid "Auto Install Configurator"
msgstr "การคอนฟิกหลังการติดตั้ง"

#: standalone/drakautoinst:42
#, c-format
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Press ok to continue."
msgstr ""

#: standalone/drakautoinst:60
#, fuzzy, c-format
msgid "replay"
msgstr "เรียกอีกครั้ง"

#: standalone/drakautoinst:60 standalone/drakautoinst:69
#, c-format
msgid "manual"
msgstr ""

#: standalone/drakautoinst:64
#, fuzzy, c-format
msgid "Automatic Steps Configuration"
msgstr "Boot Style Configuration"

#: standalone/drakautoinst:65
#, c-format
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr ""

#: standalone/drakautoinst:77 standalone/drakautoinst:78
#: standalone/drakautoinst:92
#, fuzzy, c-format
msgid "Creating auto install floppy"
msgstr "กำลังเตรียมการติดตั้งลงบน floppy"

#: standalone/drakautoinst:90
#, fuzzy, c-format
msgid "Insert another blank floppy in drive %s (for drivers disk)"
msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s "

#: standalone/drakautoinst:91
#, fuzzy, c-format
msgid "Creating auto install floppy (drivers disk)"
msgstr "กำลังเตรียมการติดตั้งลงบน floppy"

#: standalone/drakautoinst:158
#, c-format
msgid ""
"\n"
"Welcome.\n"
"\n"
"The parameters of the auto-install are available in the sections on the left"
msgstr ""

#: standalone/drakautoinst:252 standalone/drakgw:598 standalone/drakvpn:902
#: standalone/scannerdrake:379
#, c-format
msgid "Congratulations!"
msgstr "ขอแสดงความยินดี"

#: standalone/drakautoinst:253
#, c-format
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""

#: standalone/drakautoinst:289
#, fuzzy, c-format
msgid "Auto Install"
msgstr "ติดตั้ง"

#: standalone/drakautoinst:358
#, fuzzy, c-format
msgid "Add an item"
msgstr "เพิ่มผู้ใช้"

#: standalone/drakautoinst:365
#, fuzzy, c-format
msgid "Remove the last item"
msgstr "ฟอร์แมต loopback file %s"

#: standalone/drakbackup:88
#, c-format
msgid "hd"
msgstr ""

#: standalone/drakbackup:88
#, fuzzy, c-format
msgid "tape"
msgstr "ประเภท"

#: standalone/drakbackup:112
#, fuzzy, c-format
msgid "No devices found"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/drakbackup:152
#, c-format
msgid ""
"Expect is an extension to the Tcl scripting language that allows interactive "
"sessions without user intervention."
msgstr ""

#: standalone/drakbackup:153
#, c-format
msgid "Store the password for this system in drakbackup configuration."
msgstr ""

#: standalone/drakbackup:154
#, c-format
msgid ""
"For a multisession CD, only the first session will erase the cdrw. Otherwise "
"the cdrw is erased before each backup."
msgstr ""

#: standalone/drakbackup:155
#, c-format
msgid ""
"This option will save files that have changed.  Exact behavior depends on "
"whether incremental or differential mode is used."
msgstr ""

#: standalone/drakbackup:156
#, c-format
msgid ""
"Incremental backups only save files that have changed or are new since the "
"last backup."
msgstr ""

#: standalone/drakbackup:157
#, c-format
msgid ""
"Differential backups only save files that have changed or are new since the "
"original 'base' backup."
msgstr ""

#: standalone/drakbackup:158
#, c-format
msgid ""
"This should be a local user or email addresse that you want the backup "
"results sent to. You will need to define a functioning mail server."
msgstr ""

#: standalone/drakbackup:159
#, c-format
msgid ""
"Files or wildcards listed in a .backupignore file at the top of a directory "
"tree will not be backed up."
msgstr ""

#: standalone/drakbackup:160
#, c-format
msgid ""
"For backups to other media, files are still created on the hard drive, then "
"moved to the other media.  Enabling this option will remove the hard drive "
"tar files after the backup."
msgstr ""

#: standalone/drakbackup:161
#, c-format
msgid ""
"Some protocols, like rsync, may be configured at the server end.  Rather "
"than using a directory path, you would use the 'module' name for the service "
"path."
msgstr ""

#: standalone/drakbackup:162
#, c-format
msgid ""
"Custom allows you to specify your own day and time.  The other options use "
"run-parts in /etc/crontab."
msgstr ""

#: standalone/drakbackup:326
#, c-format
msgid "No media selected for cron operation."
msgstr ""

#: standalone/drakbackup:330
#, c-format
msgid "No interval selected for cron operation."
msgstr ""

#: standalone/drakbackup:377
#, c-format
msgid "Interval cron not available as non-root"
msgstr ""

#: standalone/drakbackup:462 standalone/logdrake:467
#, c-format
msgid "\"%s\" neither is a valid email nor is an existing local user!"
msgstr ""

#: standalone/drakbackup:466 standalone/logdrake:472
#, c-format
msgid ""
"\"%s\" is a local user, but you did not select a local smtp, so you must use "
"a complete email address!"
msgstr ""

#: standalone/drakbackup:475
#, c-format
msgid "Valid user list changed, rewriting config file."
msgstr ""

#: standalone/drakbackup:477
#, c-format
msgid "Old user list:\n"
msgstr ""

#: standalone/drakbackup:479
#, c-format
msgid "New user list:\n"
msgstr ""

#: standalone/drakbackup:524
#, c-format
msgid ""
"\n"
"                      DrakBackup Report \n"
msgstr ""

#: standalone/drakbackup:525
#, c-format
msgid ""
"\n"
"                      DrakBackup Daemon Report\n"
msgstr ""

#: standalone/drakbackup:531
#, c-format
msgid ""
"\n"
"                    DrakBackup Report Details\n"
"\n"
"\n"
msgstr ""

#: standalone/drakbackup:556 standalone/drakbackup:627
#: standalone/drakbackup:683
#, fuzzy, c-format
msgid "Total progress"
msgstr "กำลังตรวจสอบพอร์ต"

#: standalone/drakbackup:609
#, c-format
msgid ""
"%s exists, delete?\n"
"\n"
"If you've already done this process you'll probably\n"
" need to purge the entry from authorized_keys on the server."
msgstr ""

#: standalone/drakbackup:618
#, c-format
msgid "This may take a moment to generate the keys."
msgstr ""

#: standalone/drakbackup:625
#, fuzzy, c-format
msgid "Cannot spawn %s."
msgstr "Adapter %s: %s"

#: standalone/drakbackup:642
#, c-format
msgid "No password prompt on %s at port %s"
msgstr ""

#: standalone/drakbackup:643
#, fuzzy, c-format
msgid "Bad password on %s"
msgstr "ไม่มีรหัสผ่าน"

#: standalone/drakbackup:644
#, c-format
msgid "Permission denied transferring %s to %s"
msgstr ""

#: standalone/drakbackup:645
#, fuzzy, c-format
msgid "Can't find %s on %s"
msgstr "Adapter %s: %s"

#: standalone/drakbackup:649
#, c-format
msgid "%s not responding"
msgstr ""

#: standalone/drakbackup:653
#, c-format
msgid ""
"Transfer successful\n"
"You may want to verify you can login to the server with:\n"
"\n"
"ssh -i %s %s@%s\n"
"\n"
"without being prompted for a password."
msgstr ""

#: standalone/drakbackup:697
#, c-format
msgid "WebDAV remote site already in sync!"
msgstr ""

#: standalone/drakbackup:701
#, c-format
msgid "WebDAV transfer failed!"
msgstr ""

#: standalone/drakbackup:722
#, c-format
msgid "No CD-R/DVD-R in drive!"
msgstr ""

#: standalone/drakbackup:726
#, c-format
msgid "Does not appear to be recordable media!"
msgstr ""

#: standalone/drakbackup:730
#, c-format
msgid "Not erasable media!"
msgstr ""

#: standalone/drakbackup:771
#, c-format
msgid "This may take a moment to erase the media."
msgstr ""

#: standalone/drakbackup:829
#, c-format
msgid "Permission problem accessing CD."
msgstr ""

#: standalone/drakbackup:856
#, c-format
msgid "No tape in %s!"
msgstr ""

#: standalone/drakbackup:956
#, c-format
msgid ""
"Backup quota exceeded!\n"
"%d MB used vs %d MB allocated."
msgstr ""

#: standalone/drakbackup:975 standalone/drakbackup:1008
#, c-format
msgid "Backup system files..."
msgstr ""

#: standalone/drakbackup:1009 standalone/drakbackup:1050
#, fuzzy, c-format
msgid "Hard Disk Backup files..."
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:1049
#, fuzzy, c-format
msgid "Backup User files..."
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:1084
#, fuzzy, c-format
msgid "Backup Other files..."
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:1085
#, c-format
msgid "Hard Disk Backup Progress..."
msgstr ""

#: standalone/drakbackup:1090
#, fuzzy, c-format
msgid "No changes to backup!"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:1108 standalone/drakbackup:1132
#, c-format
msgid ""
"\n"
"Drakbackup activities via %s:\n"
"\n"
msgstr ""

#: standalone/drakbackup:1117
#, c-format
msgid ""
"\n"
" FTP connection problem: It was not possible to send your backup files by "
"FTP.\n"
msgstr ""

#: standalone/drakbackup:1118
#, c-format
msgid ""
"Error during sending file via FTP. Please correct your FTP configuration."
msgstr ""

#: standalone/drakbackup:1120
#, c-format
msgid "file list sent by FTP: %s\n"
msgstr ""

#: standalone/drakbackup:1137
#, c-format
msgid ""
"\n"
"Drakbackup activities via CD:\n"
"\n"
msgstr ""

#: standalone/drakbackup:1142
#, c-format
msgid ""
"\n"
"Drakbackup activities via tape:\n"
"\n"
msgstr ""

#: standalone/drakbackup:1151
#, c-format
msgid "Error sending mail. Your report mail was not sent."
msgstr ""

#: standalone/drakbackup:1152
#, fuzzy, c-format
msgid " Error while sending mail. \n"
msgstr "มีปัญหากับการอ่านข้อมูลในไฟล์ %s"

#: standalone/drakbackup:1180
#, c-format
msgid "Can't create catalog!"
msgstr ""

#: standalone/drakbackup:1393
#, c-format
msgid ""
"\n"
"Please check all options that you need.\n"
msgstr ""

#: standalone/drakbackup:1394
#, c-format
msgid ""
"These options can backup and restore all files in your /etc directory.\n"
msgstr ""

#: standalone/drakbackup:1395
#, fuzzy, c-format
msgid "Backup your System files. (/etc directory)"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:1396 standalone/drakbackup:1460
#: standalone/drakbackup:1526
#, c-format
msgid "Use Incremental/Differential Backups  (do not replace old backups)"
msgstr ""

#: standalone/drakbackup:1398 standalone/drakbackup:1462
#: standalone/drakbackup:1528
#, c-format
msgid "Use Incremental Backups"
msgstr ""

#: standalone/drakbackup:1398 standalone/drakbackup:1462
#: standalone/drakbackup:1528
#, c-format
msgid "Use Differential Backups"
msgstr ""

#: standalone/drakbackup:1400
#, c-format
msgid "Do not include critical files (passwd, group, fstab)"
msgstr ""

#: standalone/drakbackup:1401
#, c-format
msgid ""
"With this option you will be able to restore any version\n"
" of your /etc directory."
msgstr ""

#: standalone/drakbackup:1432
#, fuzzy, c-format
msgid "Please check all users that you want to include in your backup."
msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "

#: standalone/drakbackup:1459
#, c-format
msgid "Do not include the browser cache"
msgstr ""

#: standalone/drakbackup:1513
#, c-format
msgid "Select the files or directories and click on 'OK'"
msgstr ""

#: standalone/drakbackup:1514 standalone/drakfont:656
#, fuzzy, c-format
msgid "Remove Selected"
msgstr "ลบคิว"

#: standalone/drakbackup:1577
#, fuzzy, c-format
msgid "Users"
msgstr "ชื่อผู้ใช้"

#: standalone/drakbackup:1597
#, fuzzy, c-format
msgid "Use network connection to backup"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:1599
#, c-format
msgid "Net Method:"
msgstr ""

#: standalone/drakbackup:1603
#, c-format
msgid "Use Expect for SSH"
msgstr ""

#: standalone/drakbackup:1604
#, c-format
msgid "Create/Transfer backup keys for SSH"
msgstr ""

#: standalone/drakbackup:1606
#, c-format
msgid "Transfer Now"
msgstr ""

#: standalone/drakbackup:1608
#, c-format
msgid "Other (not drakbackup) keys in place already"
msgstr ""

#: standalone/drakbackup:1611
#, fuzzy, c-format
msgid "Host name or IP."
msgstr "ชื่อโฮสต์:"

#: standalone/drakbackup:1616
#, c-format
msgid "Directory (or module) to put the backup on this host."
msgstr ""

#: standalone/drakbackup:1621
#, fuzzy, c-format
msgid "Login name"
msgstr "ชื่อโดเมน"

#: standalone/drakbackup:1628
#, fuzzy, c-format
msgid "Remember this password"
msgstr "ไม่มีรหัสผ่าน"

#: standalone/drakbackup:1644
#, c-format
msgid "Need hostname, username and password!"
msgstr ""

#: standalone/drakbackup:1742
#, c-format
msgid "Use CD-R/DVD-R to backup"
msgstr ""

#: standalone/drakbackup:1745
#, fuzzy, c-format
msgid "Choose your CD/DVD device"
msgstr "คุณต้องการเลือกคีย์บอร์ดเลย์เอ้าท์แบบใด "

#: standalone/drakbackup:1750
#, fuzzy, c-format
msgid "Choose your CD/DVD media size"
msgstr "คุณต้องการเลือกคีย์บอร์ดเลย์เอ้าท์แบบใด "

#: standalone/drakbackup:1757
#, fuzzy, c-format
msgid "Multisession CD"
msgstr "Multimedia - เขียน CD "

#: standalone/drakbackup:1759
#, c-format
msgid "CDRW media"
msgstr ""

#: standalone/drakbackup:1765
#, fuzzy, c-format
msgid "Erase your RW media (1st Session)"
msgstr "โปรดเลือกพาร์ติชั่น"

#: standalone/drakbackup:1766
#, c-format
msgid " Erase Now "
msgstr ""

#: standalone/drakbackup:1772
#, c-format
msgid "DVD+RW media"
msgstr ""

#: standalone/drakbackup:1774
#, fuzzy, c-format
msgid "DVD-R media"
msgstr "อุปกรณ์"

#: standalone/drakbackup:1776
#, fuzzy, c-format
msgid "DVDRAM device"
msgstr "อุปกรณ์"

#: standalone/drakbackup:1807
#, fuzzy, c-format
msgid "No CD device defined!"
msgstr "เลือกไฟล์"

#: standalone/drakbackup:1854
#, fuzzy, c-format
msgid "Use tape to backup"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:1857
#, c-format
msgid "Device name to use for backup"
msgstr ""

#: standalone/drakbackup:1863
#, fuzzy, c-format
msgid "Don't rewind tape after backup"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:1869
#, fuzzy, c-format
msgid "Erase tape before backup"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:1875
#, fuzzy, c-format
msgid "Eject tape after the backup"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:1942
#, fuzzy, c-format
msgid "Enter the directory to save to:"
msgstr "กรุณาทดสอบเม้าส์"

#: standalone/drakbackup:1946
#, fuzzy, c-format
msgid "Directory to save to"
msgstr "กรุณาทดสอบเม้าส์"

#: standalone/drakbackup:1951
#, c-format
msgid ""
"Maximum size\n"
" allowed for Drakbackup (MB)"
msgstr ""

#: standalone/drakbackup:2015
#, c-format
msgid "CD-R / DVD-R"
msgstr ""

#: standalone/drakbackup:2020
#, c-format
msgid "HardDrive / NFS"
msgstr ""

#: standalone/drakbackup:2036 standalone/drakbackup:2041
#: standalone/drakbackup:2046
#, c-format
msgid "hourly"
msgstr ""

#: standalone/drakbackup:2037 standalone/drakbackup:2042
#: standalone/drakbackup:2046
#, c-format
msgid "daily"
msgstr ""

#: standalone/drakbackup:2038 standalone/drakbackup:2043
#: standalone/drakbackup:2046
#, c-format
msgid "weekly"
msgstr ""

#: standalone/drakbackup:2039 standalone/drakbackup:2044
#: standalone/drakbackup:2046
#, c-format
msgid "monthly"
msgstr ""

#: standalone/drakbackup:2040 standalone/drakbackup:2045
#: standalone/drakbackup:2046
#, fuzzy, c-format
msgid "custom"
msgstr "แบบปรับแก้ได้ (Customized) "

#: standalone/drakbackup:2051
#, c-format
msgid "January"
msgstr "มกราคม"

#: standalone/drakbackup:2051
#, c-format
msgid "February"
msgstr "กุมภาพันธ์"

#: standalone/drakbackup:2051
#, c-format
msgid "March"
msgstr "มีนาคม"

#: standalone/drakbackup:2052
#, c-format
msgid "April"
msgstr "เมษายน"

#: standalone/drakbackup:2052
#, c-format
msgid "May"
msgstr "พฤษภาคม"

#: standalone/drakbackup:2052
#, c-format
msgid "June"
msgstr "มิถุนายน"

#: standalone/drakbackup:2052
#, c-format
msgid "July"
msgstr "กรกฎาคม"

#: standalone/drakbackup:2052
#, c-format
msgid "August"
msgstr "สิงหาคม"

#: standalone/drakbackup:2052
#, c-format
msgid "September"
msgstr "กันยายน"

#: standalone/drakbackup:2053
#, c-format
msgid "October"
msgstr "ตุลาคม"

#: standalone/drakbackup:2053
#, c-format
msgid "November"
msgstr "พฤศจิกายน"

#: standalone/drakbackup:2053
#, c-format
msgid "December"
msgstr "ธันวาคม"

#: standalone/drakbackup:2058
#, c-format
msgid "Sunday"
msgstr "อาทิตย์"

#: standalone/drakbackup:2058
#, c-format
msgid "Monday"
msgstr "จันทร์"

#: standalone/drakbackup:2058
#, c-format
msgid "Tuesday"
msgstr "อังคาร"

#: standalone/drakbackup:2059
#, c-format
msgid "Wednesday"
msgstr "พุธ"

#: standalone/drakbackup:2059
#, c-format
msgid "Thursday"
msgstr "พฤหัสบดี"

#: standalone/drakbackup:2059
#, c-format
msgid "Friday"
msgstr "ศุกร์"

#: standalone/drakbackup:2059
#, c-format
msgid "Saturday"
msgstr "เสาร์"

#: standalone/drakbackup:2094
#, fuzzy, c-format
msgid "Use daemon"
msgstr "ชื่อผู้ใช้"

#: standalone/drakbackup:2099
#, fuzzy, c-format
msgid "Please choose the time interval between each backup"
msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "

#: standalone/drakbackup:2105
#, c-format
msgid "Custom setup/crontab entry:"
msgstr ""

#: standalone/drakbackup:2110
#, fuzzy, c-format
msgid "Minute"
msgstr "1 นาที"

#: standalone/drakbackup:2114
#, c-format
msgid "Hour"
msgstr ""

#: standalone/drakbackup:2118
#, fuzzy, c-format
msgid "Day"
msgstr "พฤษภาคม"

#: standalone/drakbackup:2122
#, fuzzy, c-format
msgid "Month"
msgstr "เม้าท์"

#: standalone/drakbackup:2126
#, fuzzy, c-format
msgid "Weekday"
msgstr "พุธ"

#: standalone/drakbackup:2132
#, fuzzy, c-format
msgid "Please choose the media for backup."
msgstr "กรุณาเลือกภาษาที่ต้องการใช้"

#: standalone/drakbackup:2139
#, fuzzy, c-format
msgid "Please be sure that the cron daemon is included in your services."
msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "

#: standalone/drakbackup:2140
#, c-format
msgid "Note that currently all 'net' media also use the hard drive."
msgstr ""

#: standalone/drakbackup:2190
#, fuzzy, c-format
msgid "Please choose the compression type"
msgstr "คุณมีเม้าส์ชนิดใด"

#: standalone/drakbackup:2194
#, fuzzy, c-format
msgid "Use .backupignore files"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:2196
#, c-format
msgid "Send mail report after each backup to:"
msgstr ""

#: standalone/drakbackup:2202
#, fuzzy, c-format
msgid "SMTP server for mail:"
msgstr "ชื่อโฮสต์ของ SMB server"

#: standalone/drakbackup:2207
#, c-format
msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""

#: standalone/drakbackup:2247
#, c-format
msgid "What"
msgstr ""

#: standalone/drakbackup:2252
#, fuzzy, c-format
msgid "Where"
msgstr "Wheel"

#: standalone/drakbackup:2257
#, fuzzy, c-format
msgid "When"
msgstr "Wheel"

#: standalone/drakbackup:2262
#, fuzzy, c-format
msgid "More Options"
msgstr "อ๊อปชั่นของโมดูล:"

#: standalone/drakbackup:2275
#, fuzzy, c-format
msgid "Backup destination not configured..."
msgstr "ไม่มีการคอนฟิกจอภาพ"

#: standalone/drakbackup:2293 standalone/drakbackup:4208
#, fuzzy, c-format
msgid "Drakbackup Configuration"
msgstr "การคอนฟิกระบบเน็ตเวิร์ก"

#: standalone/drakbackup:2309
#, fuzzy, c-format
msgid "Please choose where you want to backup"
msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "

#: standalone/drakbackup:2311
#, c-format
msgid "Hard Drive used to prepare backups for all media"
msgstr ""

#: standalone/drakbackup:2319
#, c-format
msgid "Across Network"
msgstr ""

#: standalone/drakbackup:2327
#, c-format
msgid "On CD-R"
msgstr ""

#: standalone/drakbackup:2335
#, c-format
msgid "On Tape Device"
msgstr ""

#: standalone/drakbackup:2374
#, c-format
msgid "Backup Users"
msgstr ""

#: standalone/drakbackup:2375
#, fuzzy, c-format
msgid " (Default is all users)"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/drakbackup:2387
#, fuzzy, c-format
msgid "Please choose what you want to backup"
msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "

#: standalone/drakbackup:2388
#, fuzzy, c-format
msgid "Backup System"
msgstr "เซ็ตอัพระบบไฟล์"

#: standalone/drakbackup:2390
#, c-format
msgid "Select user manually"
msgstr ""

#: standalone/drakbackup:2419
#, fuzzy, c-format
msgid "Please select data to backup..."
msgstr "กรุณาเลือกภาษาที่ต้องการใช้"

#: standalone/drakbackup:2491
#, c-format
msgid ""
"\n"
"Backup Sources: \n"
msgstr ""

#: standalone/drakbackup:2492
#, c-format
msgid ""
"\n"
"- System Files:\n"
msgstr ""

#: standalone/drakbackup:2494
#, c-format
msgid ""
"\n"
"- User Files:\n"
msgstr ""

#: standalone/drakbackup:2496
#, c-format
msgid ""
"\n"
"- Other Files:\n"
msgstr ""

#: standalone/drakbackup:2498
#, c-format
msgid ""
"\n"
"- Save on Hard drive on path: %s\n"
msgstr ""

#: standalone/drakbackup:2499
#, c-format
msgid "\tLimit disk usage to %s MB\n"
msgstr ""

#: standalone/drakbackup:2502
#, c-format
msgid ""
"\n"
"- Delete hard drive tar files after backup.\n"
msgstr ""

#: standalone/drakbackup:2506
#, c-format
msgid "NO"
msgstr ""

#: standalone/drakbackup:2507
#, c-format
msgid "YES"
msgstr ""

#: standalone/drakbackup:2508
#, c-format
msgid ""
"\n"
"- Burn to CD"
msgstr ""

#: standalone/drakbackup:2509
#, c-format
msgid "RW"
msgstr ""

#: standalone/drakbackup:2510
#, fuzzy, c-format
msgid " on device: %s"
msgstr "ดีไวซ์ของเม้าส์: %s\n"

#: standalone/drakbackup:2511
#, c-format
msgid " (multi-session)"
msgstr ""

#: standalone/drakbackup:2512
#, c-format
msgid ""
"\n"
"- Save to Tape on device: %s"
msgstr ""

#: standalone/drakbackup:2513
#, c-format
msgid "\t\tErase=%s"
msgstr ""

#: standalone/drakbackup:2516
#, c-format
msgid ""
"\n"
"- Save via %s on host: %s\n"
msgstr ""

#: standalone/drakbackup:2517
#, c-format
msgid ""
"\t\t user name: %s\n"
"\t\t on path: %s \n"
msgstr ""

#: standalone/drakbackup:2518
#, fuzzy, c-format
msgid ""
"\n"
"- Options:\n"
msgstr "/Options/ทดลอง"

#: standalone/drakbackup:2519
#, c-format
msgid "\tDo not include System Files\n"
msgstr ""

#: standalone/drakbackup:2521
#, c-format
msgid "\tBackups use tar and bzip2\n"
msgstr ""

#: standalone/drakbackup:2522
#, c-format
msgid "\tBackups use tar and gzip\n"
msgstr ""

#: standalone/drakbackup:2523
#, fuzzy, c-format
msgid "\tBackups use tar only\n"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:2525
#, fuzzy, c-format
msgid "\tUse .backupignore files\n"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:2526
#, c-format
msgid "\tSend mail to %s\n"
msgstr ""

#: standalone/drakbackup:2527
#, fuzzy, c-format
msgid "\tUsing SMTP server %s\n"
msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"

#: standalone/drakbackup:2529
#, c-format
msgid ""
"\n"
"- Daemon, %s via:\n"
msgstr ""

#: standalone/drakbackup:2530
#, c-format
msgid "\t-Hard drive.\n"
msgstr ""

#: standalone/drakbackup:2531
#, c-format
msgid "\t-CD-R.\n"
msgstr ""

#: standalone/drakbackup:2532
#, c-format
msgid "\t-Tape \n"
msgstr ""

#: standalone/drakbackup:2533
#, c-format
msgid "\t-Network by FTP.\n"
msgstr ""

#: standalone/drakbackup:2534
#, c-format
msgid "\t-Network by SSH.\n"
msgstr ""

#: standalone/drakbackup:2535
#, c-format
msgid "\t-Network by rsync.\n"
msgstr ""

#: standalone/drakbackup:2536
#, c-format
msgid "\t-Network by webdav.\n"
msgstr ""

#: standalone/drakbackup:2538
#, c-format
msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""

#: standalone/drakbackup:2543
#, c-format
msgid ""
"List of data to restore:\n"
"\n"
msgstr ""

#: standalone/drakbackup:2545
#, fuzzy, c-format
msgid "- Restore System Files.\n"
msgstr "ลบคิว"

#: standalone/drakbackup:2547 standalone/drakbackup:2557
#, c-format
msgid "   - from date: %s %s\n"
msgstr ""

#: standalone/drakbackup:2550
#, fuzzy, c-format
msgid "- Restore User Files: \n"
msgstr "เรียกคืนจากไฟล์"

#: standalone/drakbackup:2555
#, fuzzy, c-format
msgid "- Restore Other Files: \n"
msgstr "เรียกคืนจากไฟล์"

#: standalone/drakbackup:2736
#, c-format
msgid ""
"List of data corrupted:\n"
"\n"
msgstr ""

#: standalone/drakbackup:2738
#, fuzzy, c-format
msgid "Please uncheck or remove it on next time."
msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"

#: standalone/drakbackup:2748
#, c-format
msgid "Backup files are corrupted"
msgstr ""

#: standalone/drakbackup:2769
#, c-format
msgid "          All of your selected data have been          "
msgstr ""

#: standalone/drakbackup:2770
#, c-format
msgid "          Successfuly Restored on %s       "
msgstr ""

#: standalone/drakbackup:2889
#, fuzzy, c-format
msgid "         Restore Configuration       "
msgstr "การคอนฟิกระบบเน็ตเวิร์ก"

#: standalone/drakbackup:2917
#, c-format
msgid "OK to restore the other files."
msgstr ""

#: standalone/drakbackup:2933
#, c-format
msgid "User list to restore (only the most recent date per user is important)"
msgstr ""

#: standalone/drakbackup:3000
#, fuzzy, c-format
msgid "Please choose the date to restore:"
msgstr "คุณมีเม้าส์ชนิดใด"

#: standalone/drakbackup:3037
#, fuzzy, c-format
msgid "Restore from Hard Disk."
msgstr "เรียกคืนจากแผ่นฟล้อปปี้"

#: standalone/drakbackup:3039
#, fuzzy, c-format
msgid "Enter the directory where backups are stored"
msgstr "กรุณาทดสอบเม้าส์"

#: standalone/drakbackup:3043
#, c-format
msgid "Directory with backups"
msgstr ""

#: standalone/drakbackup:3097
#, fuzzy, c-format
msgid "Select another media to restore from"
msgstr "คุณมีเม้าส์ชนิดใด"

#: standalone/drakbackup:3099
#, fuzzy, c-format
msgid "Other Media"
msgstr "อื่นๆ"

#: standalone/drakbackup:3104
#, fuzzy, c-format
msgid "Restore system"
msgstr "ติดตั้งระบบ"

#: standalone/drakbackup:3105
#, fuzzy, c-format
msgid "Restore Users"
msgstr "เรียกคืนจากไฟล์"

#: standalone/drakbackup:3106
#, fuzzy, c-format
msgid "Restore Other"
msgstr "เรียกคืนจากไฟล์"

#: standalone/drakbackup:3108
#, fuzzy, c-format
msgid "Select path to restore (instead of /)"
msgstr "คุณมีเม้าส์ชนิดใด"

#: standalone/drakbackup:3112 standalone/drakbackup:3394
#, fuzzy, c-format
msgid "Path To Restore To"
msgstr "แบบปรับแก้ได้ (Customized) "

#: standalone/drakbackup:3115
#, c-format
msgid "Do new backup before restore (only for incremental backups.)"
msgstr ""

#: standalone/drakbackup:3117
#, c-format
msgid "Remove user directories before restore."
msgstr ""

#: standalone/drakbackup:3201
#, c-format
msgid "Filename text substring to search for (empty string matches all):"
msgstr ""

#: standalone/drakbackup:3204
#, c-format
msgid "Search Backups"
msgstr ""

#: standalone/drakbackup:3223
#, fuzzy, c-format
msgid "No matches found..."
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/drakbackup:3227
#, fuzzy, c-format
msgid "Restore Selected"
msgstr "ลบคิว"

#: standalone/drakbackup:3362
#, c-format
msgid ""
"Click date/time to see backup files.\n"
"Ctrl-Click files to select multiple files."
msgstr ""

#: standalone/drakbackup:3368
#, c-format
msgid ""
"Restore Selected\n"
"Catalog Entry"
msgstr ""

#: standalone/drakbackup:3377
#, fuzzy, c-format
msgid ""
"Restore Selected\n"
"Files"
msgstr "ลบคิว"

#: standalone/drakbackup:3454
#, c-format
msgid "Backup files not found at %s."
msgstr ""

#: standalone/drakbackup:3467
#, fuzzy, c-format
msgid "Restore From CD"
msgstr "เรียกคืนจากแผ่นฟล้อปปี้"

#: standalone/drakbackup:3467
#, c-format
msgid ""
"Insert the CD with volume label %s\n"
" in the CD drive under mount point /mnt/cdrom"
msgstr ""

#: standalone/drakbackup:3469
#, c-format
msgid "Not the correct CD label. Disk is labelled %s."
msgstr ""

#: standalone/drakbackup:3479
#, fuzzy, c-format
msgid "Restore From Tape"
msgstr "กู้ตารางพาร์ติชั่น"

#: standalone/drakbackup:3479
#, c-format
msgid ""
"Insert the tape with volume label %s\n"
" in the tape drive device %s"
msgstr ""

#: standalone/drakbackup:3481
#, c-format
msgid "Not the correct tape label. Tape is labelled %s."
msgstr ""

#: standalone/drakbackup:3492
#, fuzzy, c-format
msgid "Restore Via Network"
msgstr "เรียกคืนจากไฟล์"

#: standalone/drakbackup:3492
#, c-format
msgid "Restore Via Network Protocol: %s"
msgstr ""

#: standalone/drakbackup:3493
#, fuzzy, c-format
msgid "Host Name"
msgstr "ชื่อโฮสต์:"

#: standalone/drakbackup:3494
#, c-format
msgid "Host Path or Module"
msgstr ""

#: standalone/drakbackup:3501
#, fuzzy, c-format
msgid "Password required"
msgstr "รหัสผ่าน"

#: standalone/drakbackup:3507
#, fuzzy, c-format
msgid "Username required"
msgstr "ชื่อผู้ใช้"

#: standalone/drakbackup:3510
#, fuzzy, c-format
msgid "Hostname required"
msgstr "ชื่อโฮสต์:"

#: standalone/drakbackup:3515
#, c-format
msgid "Path or Module required"
msgstr ""

#: standalone/drakbackup:3528
#, c-format
msgid "Files Restored..."
msgstr ""

#: standalone/drakbackup:3531
#, fuzzy, c-format
msgid "Restore Failed..."
msgstr "เรียกคืนจากไฟล์"

#: standalone/drakbackup:3549
#, fuzzy, c-format
msgid "%s not retrieved..."
msgstr "ไม่พบการ์ดเน็ตเวิร์ก"

#: standalone/drakbackup:3748 standalone/drakbackup:3817
#, fuzzy, c-format
msgid "Search for files to restore"
msgstr "คุณมีเม้าส์ชนิดใด"

#: standalone/drakbackup:3752
#, c-format
msgid "Restore all backups"
msgstr ""

#: standalone/drakbackup:3760
#, fuzzy, c-format
msgid "Custom Restore"
msgstr "แบบปรับแก้ได้ (Customized) "

#: standalone/drakbackup:3764 standalone/drakbackup:3813
#, fuzzy, c-format
msgid "Restore From Catalog"
msgstr "กู้ตารางพาร์ติชั่น"

#: standalone/drakbackup:3785
#, fuzzy, c-format
msgid "Unable to find backups to restore...\n"
msgstr "กรุณาเลือกภาษาที่ต้องการใช้"

#: standalone/drakbackup:3786
#, fuzzy, c-format
msgid "Verify that %s is the correct path"
msgstr "ถูกต้องหรือไม่?"

#: standalone/drakbackup:3787
#, c-format
msgid " and the CD is in the drive"
msgstr ""

#: standalone/drakbackup:3789
#, c-format
msgid "Backups on unmountable media - Use Catalog to restore"
msgstr ""

#: standalone/drakbackup:3805
#, c-format
msgid "CD in place - continue."
msgstr ""

#: standalone/drakbackup:3810
#, c-format
msgid "Browse to new restore repository."
msgstr ""

#: standalone/drakbackup:3811
#, fuzzy, c-format
msgid "Directory To Restore From"
msgstr "เรียกคืนจากแผ่นฟล้อปปี้"

#: standalone/drakbackup:3847
#, fuzzy, c-format
msgid "Restore Progress"
msgstr "เรียกคืนจากไฟล์"

#: standalone/drakbackup:3898 standalone/drakbackup:3971
#: standalone/logdrake:174
#, fuzzy, c-format
msgid "Save"
msgstr "สถานะ:"

#: standalone/drakbackup:3954
#, fuzzy, c-format
msgid "Build Backup"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:3987 standalone/drakbackup:4307
#, fuzzy, c-format
msgid "Restore"
msgstr "เรียกคืนจากไฟล์"

#: standalone/drakbackup:4075
#, fuzzy, c-format
msgid "The following packages need to be installed:\n"
msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกติดตั้ง"

#: standalone/drakbackup:4102
#, fuzzy, c-format
msgid "Please select data to restore..."
msgstr "กรุณาเลือกภาษาที่ต้องการใช้"

#: standalone/drakbackup:4142
#, fuzzy, c-format
msgid "Backup system files"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:4145
#, fuzzy, c-format
msgid "Backup user files"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:4148
#, fuzzy, c-format
msgid "Backup other files"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:4151 standalone/drakbackup:4185
#, c-format
msgid "Total Progress"
msgstr ""

#: standalone/drakbackup:4177
#, fuzzy, c-format
msgid "Sending files by FTP"
msgstr "บันทึกลงไฟล์"

#: standalone/drakbackup:4180
#, fuzzy, c-format
msgid "Sending files..."
msgstr "บันทึกลงไฟล์"

#: standalone/drakbackup:4250
#, fuzzy, c-format
msgid "Backup Now from configuration file"
msgstr "การคอนฟิกระบบเน็ตเวิร์ก"

#: standalone/drakbackup:4255
#, fuzzy, c-format
msgid "View Backup Configuration."
msgstr "การคอนฟิกระบบเน็ตเวิร์ก"

#: standalone/drakbackup:4281
#, fuzzy, c-format
msgid "Wizard Configuration"
msgstr "การปรับแต่ง LAN"

#: standalone/drakbackup:4286
#, fuzzy, c-format
msgid "Advanced Configuration"
msgstr "การปรับแต่ง LAN"

#: standalone/drakbackup:4291
#, fuzzy, c-format
msgid "View Configuration"
msgstr "การปรับแต่ง LAN"

#: standalone/drakbackup:4295
#, c-format
msgid "View Last Log"
msgstr ""

#: standalone/drakbackup:4300
#, fuzzy, c-format
msgid "Backup Now"
msgstr "เซ็ตอัพระบบไฟล์"

#: standalone/drakbackup:4304
#, c-format
msgid ""
"No configuration file found \n"
"please click Wizard or Advanced."
msgstr ""

#: standalone/drakbackup:4324 standalone/drakbackup:4327
#, c-format
msgid "Drakbackup"
msgstr ""

#: standalone/drakboot:58
#, fuzzy, c-format
msgid "Graphical boot theme selection"
msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"

#: standalone/drakboot:58
#, c-format
msgid "System mode"
msgstr "System mode"

#: standalone/drakboot:68 standalone/drakfloppy:46 standalone/harddrake2:103
#: standalone/harddrake2:104 standalone/logdrake:71
#: standalone/printerdrake:150 standalone/printerdrake:151
#: standalone/printerdrake:152
#, c-format
msgid "/_File"
msgstr "/_ไฟล์"

#: standalone/drakboot:69 standalone/drakfloppy:47 standalone/logdrake:77
#, c-format
msgid "/File/_Quit"
msgstr "/ไฟล์/_เลิก"

#: standalone/drakboot:69 standalone/drakfloppy:47 standalone/harddrake2:104
#: standalone/logdrake:77 standalone/printerdrake:152
#, c-format
msgid "<control>Q"
msgstr "<control>Q"

#: standalone/drakboot:139
#, fuzzy, c-format
msgid "Install themes"
msgstr "ติดตั้งระบบ"

#: standalone/drakboot:140
#, fuzzy, c-format
msgid "Create new theme"
msgstr "สร้างพาร์ติชั่นใหม่"

#: standalone/drakboot:152
#, c-format
msgid "Use graphical boot"
msgstr ""

#: standalone/drakboot:157
#, c-format
msgid ""
"Your system bootloader is not in framebuffer mode. To activate graphical "
"boot, select a graphic video mode from the bootloader configuration tool."
msgstr ""

#: standalone/drakboot:164
#, fuzzy, c-format
msgid "Theme"
msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"

#: standalone/drakboot:167
#, c-format
msgid ""
"Display theme\n"
"under console"
msgstr ""

#: standalone/drakboot:176
#, c-format
msgid "Launch the graphical environment when your system starts"
msgstr "รัน X-Window เมื่อเริ่มทำงาน"

#: standalone/drakboot:184
#, c-format
msgid "No, I don't want autologin"
msgstr "ไม่ต้องการ autologin"

#: standalone/drakboot:185
#, c-format
msgid "Yes, I want autologin with this (user, desktop)"
msgstr "ใช่แล้ว ผมต้องการ autologin สำหรับผู้ใช้รายนี้"

#: standalone/drakboot:191
#, fuzzy, c-format
msgid "Default user"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/drakboot:192
#, fuzzy, c-format
msgid "Default desktop"
msgstr "Default"

#: standalone/drakboot:256
#, c-format
msgid "Installation of %s failed. The following error occured:"
msgstr "การติดตั้ง %s ล้มเหลว ต่อไปนี้เป็นข้อผิดพลาดที่เกิดขึ้น"

#: standalone/drakbug:40
#, c-format
msgid ""
"To submit a bug report, click on the button report.\n"
"This will open  a web browser window on %s\n"
" where you'll find a form to fill in.  The information displayed above will "
"be \n"
"transferred to that server."
msgstr ""

#: standalone/drakbug:48
#, c-format
msgid "Mandrake Bug Report Tool"
msgstr ""

#: standalone/drakbug:53
#, fuzzy, c-format
msgid "Mandrake Control Center"
msgstr "Control Center"

#: standalone/drakbug:55
#, c-format
msgid "Synchronization tool"
msgstr ""

#: standalone/drakbug:56 standalone/drakbug:70 standalone/drakbug:204
#: standalone/drakbug:206 standalone/drakbug:210
#, c-format
msgid "Standalone Tools"
msgstr ""

#: standalone/drakbug:57
#, c-format
msgid "HardDrake"
msgstr ""

#: standalone/drakbug:58
#, fuzzy, c-format
msgid "Mandrake Online"
msgstr "Control Center"

#: standalone/drakbug:59
#, fuzzy, c-format
msgid "Menudrake"
msgstr "แบบผู้เชี่ยวชาญ (Expert)"

#: standalone/drakbug:60
#, fuzzy, c-format
msgid "Msec"
msgstr "Mouse"

#: standalone/drakbug:61
#, fuzzy, c-format
msgid "Remote Control"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: standalone/drakbug:62
#, fuzzy, c-format
msgid "Software Manager"
msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"

#: standalone/drakbug:63
#, c-format
msgid "Urpmi"
msgstr ""

#: standalone/drakbug:64
#, c-format
msgid "Windows Migration tool"
msgstr ""

#: standalone/drakbug:65
#, fuzzy, c-format
msgid "Userdrake"
msgstr "เครื่องพิมพ์"

#: standalone/drakbug:66
#, fuzzy, c-format
msgid "Configuration Wizards"
msgstr "Network Configuration Wizard"

#: standalone/drakbug:84
#, c-format
msgid ""
"To submit a bug report, click the report button, which will open your "
"default browser\n"
"to Anthill where you will be able to upload the above information as a bug "
"report."
msgstr ""

#: standalone/drakbug:102
#, fuzzy, c-format
msgid "Application:"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#: standalone/drakbug:103 standalone/drakbug:115
#, fuzzy, c-format
msgid "Package: "
msgstr "เลือกกลุ่มแพ็คเก็จ"

#: standalone/drakbug:104
#, c-format
msgid "Kernel:"
msgstr ""

#: standalone/drakbug:105 standalone/drakbug:116
#, fuzzy, c-format
msgid "Release: "
msgstr "โปรดรอสักครู่"

#: standalone/drakbug:110
#, c-format
msgid ""
"Application Name\n"
"or Full Path:"
msgstr ""

#: standalone/drakbug:113
#, fuzzy, c-format
msgid "Find Package"
msgstr "แพ็คเก็จ %d ชุด"

#: standalone/drakbug:117
#, fuzzy, c-format
msgid "Summary: "
msgstr "รวมความ"

#: standalone/drakbug:129
#, c-format
msgid "YOUR TEXT HERE"
msgstr ""

#: standalone/drakbug:132
#, c-format
msgid "Bug Description/System Information"
msgstr ""

#: standalone/drakbug:136
#, fuzzy, c-format
msgid "Submit kernel version"
msgstr "kernel version"

#: standalone/drakbug:137
#, c-format
msgid "Submit cpuinfo"
msgstr ""

#: standalone/drakbug:138
#, c-format
msgid "Submit lspci"
msgstr ""

#: standalone/drakbug:159
#, fuzzy, c-format
msgid "Report"
msgstr "Port"

#: standalone/drakbug:219
#, fuzzy, c-format
msgid "Not installed"
msgstr "ออกจากการติดตั้ง"

#: standalone/drakbug:231
#, fuzzy, c-format
msgid "Package not installed"
msgstr "ออกจากการติดตั้ง"

#: standalone/drakbug:248
#, c-format
msgid "NOT FOUND"
msgstr ""

#: standalone/drakbug:259
#, fuzzy, c-format
msgid "connecting to %s ..."
msgstr "อ่าน CUPS drivers database..."

#: standalone/drakbug:267
#, fuzzy, c-format
msgid "No browser available! Please install one"
msgstr "คุณสามารถเลือกภาษาอื่นซึ่งจะสามารถใช้ได้หลังติดตั้ง"

#: standalone/drakbug:286
#, fuzzy, c-format
msgid "Please enter a package name."
msgstr "โปรดป้อนชื่อผู้ใช้"

#: standalone/drakbug:292
#, c-format
msgid "Please enter summary text."
msgstr ""

#: standalone/drakclock:29
#, c-format
msgid "DrakClock"
msgstr "DrakClock"

#: standalone/drakclock:39
#, fuzzy, c-format
msgid "not defined"
msgstr "คอนฟิกใหม่"

#: standalone/drakclock:41
#, fuzzy, c-format
msgid "Change Time Zone"
msgstr "โซนเวลา"

#: standalone/drakclock:45
#, c-format
msgid "Timezone - DrakClock"
msgstr "ช่วงเวลา-DrakClock"

#: standalone/drakclock:47
#, c-format
msgid "GMT - DrakClock"
msgstr "GMT-DrakClock"

#: standalone/drakclock:47
#, fuzzy, c-format
msgid "Is your hardware clock set to GMT?"
msgstr "คุณต้องการให้เซ็ตนาฬิกาฮาร์ดแวร์เป็น GMT?"

#: standalone/drakclock:79
#, fuzzy, c-format
msgid "Network Time Protocol"
msgstr "Network interface"

#: standalone/drakclock:81
#, c-format
msgid ""
"Your computer can synchronize its clock\n"
" with a remote time server using NTP"
msgstr ""

#: standalone/drakclock:82
#, c-format
msgid "Enable Network Time Protocol"
msgstr ""

#: standalone/drakclock:90
#, fuzzy, c-format
msgid "Server:"
msgstr "เซิร์ฟเวอร์"

#: standalone/drakclock:137 standalone/drakclock:149
#, fuzzy, c-format
msgid "Reset"
msgstr "ไม่ยอมรับ"

#: standalone/drakclock:214
#, c-format
msgid ""
"We need to install ntp package\n"
" to enable Network Time Protocol\n"
"\n"
"Do you want to install ntp ?"
msgstr ""

#: standalone/drakconnect:81
#, c-format
msgid "Network configuration (%d adapters)"
msgstr "การคอนฟิกระบบเน็ตเวิร์ก (%d adapters)"

#: standalone/drakconnect:92 standalone/drakconnect:751
#, c-format
msgid "Gateway:"
msgstr "เกตเวย์:"

#: standalone/drakconnect:92 standalone/drakconnect:751
#, c-format
msgid "Interface:"
msgstr "Interface:"

#: standalone/drakconnect:96 standalone/net_monitor:106
#, c-format
msgid "Wait please"
msgstr ""

#: standalone/drakconnect:116
#, c-format
msgid "Interface"
msgstr "Interface"

#: standalone/drakconnect:116 standalone/drakups:233
#, c-format
msgid "Driver"
msgstr "Driver"

#: standalone/drakconnect:116
#, fuzzy, c-format
msgid "State"
msgstr "สถานะ:"

#: standalone/drakconnect:133
#, c-format
msgid "Hostname: "
msgstr "ชื่อโฮสต์:"

#: standalone/drakconnect:135
#, fuzzy, c-format
msgid "Configure hostname..."
msgstr "คอนฟิกเม้าส์"

#: standalone/drakconnect:149 standalone/drakconnect:792
#, c-format
msgid "LAN configuration"
msgstr "การปรับแต่ง LAN"

#: standalone/drakconnect:154
#, c-format
msgid "Configure Local Area Network..."
msgstr "ปรับแต่งระบบเน็ตเวิร์กภายใน..."

#: standalone/drakconnect:162 standalone/drakconnect:240
#: standalone/drakconnect:244
#, c-format
msgid "Apply"
msgstr "มีผลทันที"

#: standalone/drakconnect:197
#, fuzzy, c-format
msgid "Manage connections"
msgstr "cable connection"

#: standalone/drakconnect:218
#, fuzzy, c-format
msgid "Device selected"
msgstr "ลบคิว"

#: standalone/drakconnect:314
#, fuzzy, c-format
msgid "IP configuration"
msgstr "การปรับแต่ง LAN"

#: standalone/drakconnect:351
#, fuzzy, c-format
msgid "DNS servers"
msgstr "เซิร์ฟเวอร์ DNS"

#: standalone/drakconnect:359
#, fuzzy, c-format
msgid "Search Domain"
msgstr "โดเมน NIS"

#: standalone/drakconnect:367
#, fuzzy, c-format
msgid "static"
msgstr "กำหนดค่า IP แบบอัตโนมัติ"

#: standalone/drakconnect:367
#, c-format
msgid "DHCP"
msgstr ""

#: standalone/drakconnect:493
#, fuzzy, c-format
msgid "Flow control"
msgstr "<control>S"

#: standalone/drakconnect:494
#, fuzzy, c-format
msgid "Line termination"
msgstr "การเชื่อมต่อกับ Internet แบบ sharing"

#: standalone/drakconnect:505
#, fuzzy, c-format
msgid "Modem timeout"
msgstr "Kernel Boot Timeout"

#: standalone/drakconnect:509
#, fuzzy, c-format
msgid "Use lock file"
msgstr "เลือกไฟล์"

#: standalone/drakconnect:511
#, c-format
msgid "Wait for dialup tone before dialing"
msgstr ""

#: standalone/drakconnect:514
#, fuzzy, c-format
msgid "Busy wait"
msgstr "ออก"

#: standalone/drakconnect:519
#, fuzzy, c-format
msgid "Modem sound"
msgstr "Mouse"

#: standalone/drakconnect:520
#, fuzzy, c-format
msgid "Enable"
msgstr "enable"

#: standalone/drakconnect:520
#, fuzzy, c-format
msgid "Disable"
msgstr "disable"

#: standalone/drakconnect:571 standalone/harddrake2:62
#, c-format
msgid "Media class"
msgstr ""

#: standalone/drakconnect:572 standalone/drakfloppy:141
#, c-format
msgid "Module name"
msgstr "ชี่อ module"

#: standalone/drakconnect:573
#, fuzzy, c-format
msgid "Mac Address"
msgstr "ค่า IP"

#: standalone/drakconnect:574 standalone/harddrake2:21
#, c-format
msgid "Bus"
msgstr ""

#: standalone/drakconnect:575 standalone/harddrake2:29
#, c-format
msgid "Location on the bus"
msgstr ""

#: standalone/drakconnect:645 standalone/drakgw:248 standalone/drakpxe:138
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr "ไม่สามารถตรวจพบ network adapter บนเครื่องนี้ กรุณารันโปรแกรมปรับแต่ง hardware"

#: standalone/drakconnect:651
#, fuzzy, c-format
msgid "Remove a network interface"
msgstr "เลือก network interface"

#: standalone/drakconnect:655
#, fuzzy, c-format
msgid "Select the network interface to remove:"
msgstr "เลือก network interface"

#: standalone/drakconnect:679
#, fuzzy, c-format
msgid ""
"An error occured while deleting the \"%s\" network interface:\n"
"\n"
"%s"
msgstr "คุณต้องการเริ่มทำงาน Network ใหม่หรือไม่"

#: standalone/drakconnect:681
#, c-format
msgid ""
"Congratulations, the \"%s\" network interface has been succesfully deleted"
msgstr ""

#: standalone/drakconnect:698
#, c-format
msgid "No Ip"
msgstr ""

#: standalone/drakconnect:699
#, fuzzy, c-format
msgid "No Mask"
msgstr "แพ็คเก็จชำรุด"

#: standalone/drakconnect:700 standalone/drakconnect:863
#, c-format
msgid "up"
msgstr ""

#: standalone/drakconnect:700 standalone/drakconnect:863
#, fuzzy, c-format
msgid "down"
msgstr "ทำเรียบร้อยแล้ว"

#: standalone/drakconnect:741 standalone/net_monitor:419
#, c-format
msgid "Connected"
msgstr "เชื่อมต่ออยู่"

#: standalone/drakconnect:741 standalone/net_monitor:419
#, c-format
msgid "Not connected"
msgstr "ไม่เชื่อมต่อ"

#: standalone/drakconnect:743
#, c-format
msgid "Disconnect..."
msgstr "ยกเลิกติดต่อ..."

#: standalone/drakconnect:743
#, c-format
msgid "Connect..."
msgstr "ติดต่อ"

#: standalone/drakconnect:772
#, c-format
msgid ""
"Warning, another Internet connection has been detected, maybe using your "
"network"
msgstr ""

#: standalone/drakconnect:788
#, fuzzy, c-format
msgid "Deactivate now"
msgstr "แอ็คทีฟ"

#: standalone/drakconnect:788
#, fuzzy, c-format
msgid "Activate now"
msgstr "แอ็คทีฟ"

#: standalone/drakconnect:796
#, c-format
msgid ""
"You don't have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""

#: standalone/drakconnect:810
#, c-format
msgid "LAN Configuration"
msgstr "การปรับแต่ง LAN"

#: standalone/drakconnect:822
#, c-format
msgid "Adapter %s: %s"
msgstr "Adapter %s: %s"

#: standalone/drakconnect:831
#, c-format
msgid "Boot Protocol"
msgstr "Boot Protocol"

#: standalone/drakconnect:832
#, c-format
msgid "Started on boot"
msgstr "เริ่มทำงานตอน boot"

#: standalone/drakconnect:868
#, c-format
msgid ""
"This interface has not been configured yet.\n"
"Run the \"Add an interface\" assistant from the Mandrake Control Center"
msgstr ""

#. -PO: here "Internet access" should be translated the same was as in control-center
#: standalone/drakconnect:923
#, c-format
msgid ""
"You don't have any configured Internet connection.\n"
"Please run \"Internet access\" in control center."
msgstr ""

#: standalone/drakconnect:931
#, c-format
msgid "Internet connection configuration"
msgstr "การปรับแต่งการติดต่อเข้า internet"

#: standalone/drakconnect:949
#, fuzzy, c-format
msgid "Third DNS server (optional)"
msgstr "เซิรฟ์เวอร์ DNS เครื่องแรก (optional)"

#: standalone/drakconnect:971
#, c-format
msgid "Internet Connection Configuration"
msgstr "การปรับแต่งการติดต่อเข้า internet"

#: standalone/drakconnect:972
#, c-format
msgid "Internet access"
msgstr "การติดต่อ internet"

#: standalone/drakconnect:974 standalone/net_monitor:88
#, c-format
msgid "Connection type: "
msgstr "ชนิดการเชื่อมต่อ"

#: standalone/drakconnect:977
#, c-format
msgid "Status:"
msgstr "สถานะ:"

#: standalone/drakedm:53
#, c-format
msgid "Choosing a display manager"
msgstr ""

#: standalone/drakedm:54
#, c-format
msgid ""
"X11 Display Manager allows you to graphically log\n"
"into your system with the X Window System running and supports running\n"
"several different X sessions on your local machine at the same time."
msgstr ""

#: standalone/drakedm:77
#, fuzzy, c-format
msgid "The change is done, do you want to restart the dm service ?"
msgstr ""
"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
"คุณแน่ใจว่าจะไม่เลือกมันหรือ"

#: standalone/drakfloppy:40
#, c-format
msgid "drakfloppy"
msgstr "drakfloppy"

#: standalone/drakfloppy:83
#, fuzzy, c-format
msgid "Boot disk creation"
msgstr "สร้าง boot disk"

#: standalone/drakfloppy:84
#, c-format
msgid "General"
msgstr "ทั่วไป"

#: standalone/drakfloppy:87
#, fuzzy, c-format
msgid "Device"
msgstr "อุปกรณ์: "

#: standalone/drakfloppy:93
#, fuzzy, c-format
msgid "Kernel version"
msgstr "kernel version"

#: standalone/drakfloppy:108
#, fuzzy, c-format
msgid "Preferences"
msgstr "ข้อกำหนด: "

#: standalone/drakfloppy:122
#, fuzzy, c-format
msgid "Advanced preferences"
msgstr "การปรับแต่ง LAN"

#: standalone/drakfloppy:141
#, c-format
msgid "Size"
msgstr "ขนาด"

#: standalone/drakfloppy:144
#, fuzzy, c-format
msgid "Mkinitrd optional arguments"
msgstr "mkinitrd optional arguments"

#: standalone/drakfloppy:146
#, c-format
msgid "force"
msgstr "บังคับ"

#: standalone/drakfloppy:147
#, c-format
msgid "omit raid modules"
msgstr "ยกเว้น raid modules"

#: standalone/drakfloppy:148
#, c-format
msgid "if needed"
msgstr "ถ้าต้องการ"

#: standalone/drakfloppy:149
#, c-format
msgid "omit scsi modules"
msgstr "ยกเว้น scsi modules"

#: standalone/drakfloppy:152
#, c-format
msgid "Add a module"
msgstr "เพิ่ม 1 module"

#: standalone/drakfloppy:161
#, c-format
msgid "Remove a module"
msgstr "ลบทิ้ง 1 module"

#: standalone/drakfloppy:296
#, c-format
msgid "Be sure a media is present for the device %s"
msgstr "ตรวจให้แน่ใจว่ามีอุปกรณ์อยู่ใน%s"

#: standalone/drakfloppy:302
#, fuzzy, c-format
msgid ""
"There is no medium or it is write-protected for device %s.\n"
"Please insert one."
msgstr ""
"ยังไม่มีอุปกรณ์ใน %s \n"
"กรุณาใส่อุปกรณ์ด้วย"

#: standalone/drakfloppy:306
#, c-format
msgid "Unable to fork: %s"
msgstr "ไม่สามารถ forkได้.%s"

#: standalone/drakfloppy:309
#, fuzzy, c-format
msgid "Floppy creation completed"
msgstr "ชนิดการเชื่อมต่อ"

#: standalone/drakfloppy:309
#, c-format
msgid "The creation of the boot floppy has been successfully completed \n"
msgstr ""

#: standalone/drakfloppy:312
#, fuzzy, c-format
msgid ""
"Unable to properly close mkbootdisk:\n"
"\n"
"<span foreground=\"Red\"><tt>%s</tt></span>"
msgstr ""
"ไม่สามารถปิด mkbootdisk ได้อย่างสมบูรณ์: \n"
"%s \n"
"%s"

#: standalone/drakfont:183
#, c-format
msgid "Search installed fonts"
msgstr ""

#: standalone/drakfont:185
#, c-format
msgid "Unselect fonts installed"
msgstr ""

#: standalone/drakfont:208
#, c-format
msgid "parse all fonts"
msgstr ""

#: standalone/drakfont:210
#, fuzzy, c-format
msgid "No fonts found"
msgstr "ไม่พบการ์ดเน็ตเวิร์ก"

#: standalone/drakfont:218 standalone/drakfont:258 standalone/drakfont:325
#: standalone/drakfont:358 standalone/drakfont:366 standalone/drakfont:392
#: standalone/drakfont:410 standalone/drakfont:424
#, fuzzy, c-format
msgid "done"
msgstr "ทำเรียบร้อยแล้ว"

#: standalone/drakfont:223
#, c-format
msgid "Could not find any font in your mounted partitions"
msgstr ""

#: standalone/drakfont:256
#, c-format
msgid "Reselect correct fonts"
msgstr ""

#: standalone/drakfont:259
#, fuzzy, c-format
msgid "Could not find any font.\n"
msgstr "ลบคิว"

#: standalone/drakfont:269
#, c-format
msgid "Search for fonts in installed list"
msgstr ""

#: standalone/drakfont:294
#, c-format
msgid "%s fonts conversion"
msgstr ""

#: standalone/drakfont:323
#, fuzzy, c-format
msgid "Fonts copy"
msgstr "ฟอร์แมต Floppy"

#: standalone/drakfont:326
#, fuzzy, c-format
msgid "True Type fonts installation"
msgstr "กำลังเตรียมการติดตั้ง"

#: standalone/drakfont:333
#, c-format
msgid "please wait during ttmkfdir..."
msgstr ""

#: standalone/drakfont:334
#, c-format
msgid "True Type install done"
msgstr ""

#: standalone/drakfont:340 standalone/drakfont:355
#, c-format
msgid "type1inst building"
msgstr ""

#: standalone/drakfont:349
#, c-format
msgid "Ghostscript referencing"
msgstr ""

#: standalone/drakfont:359
#, c-format
msgid "Suppress Temporary Files"
msgstr ""

#: standalone/drakfont:362
#, fuzzy, c-format
msgid "Restart XFS"
msgstr "จำเพาะ"

#: standalone/drakfont:408 standalone/drakfont:418
#, c-format
msgid "Suppress Fonts Files"
msgstr ""

#: standalone/drakfont:420
#, fuzzy, c-format
msgid "xfs restart"
msgstr "จำเพาะ"

#: standalone/drakfont:428
#, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"-You can install the fonts the normal way. In rare cases, bogus fonts may "
"hang up your X Server."
msgstr ""

#: standalone/drakfont:477 standalone/drakfont:486
#, c-format
msgid "DrakFont"
msgstr ""

#: standalone/drakfont:487
#, fuzzy, c-format
msgid "Font List"
msgstr "กำหนดจุดเม้าท์"

#: standalone/drakfont:493
#, fuzzy, c-format
msgid "About"
msgstr "เลิก"

#: standalone/drakfont:495 standalone/drakfont:687 standalone/drakfont:725
#, fuzzy, c-format
msgid "Uninstall"
msgstr "ออกจากการติดตั้ง"

#: standalone/drakfont:496
#, fuzzy, c-format
msgid "Import"
msgstr "ฟอร์แมตพาร์ติชั่น"

#: standalone/drakfont:512
#, c-format
msgid ""
"Copyright (C) 2001-2002 by MandrakeSoft \n"
"\n"
"\n"
"       DUPONT Sebastien (original version)\n"
"\n"
"       CHAUMETTE Damien <dchaumette@mandrakesoft.com>\n"
"\n"
"       VIGNAUD Thierry <tvignaud@mandrakesoft.com>"
msgstr ""

#: standalone/drakfont:521
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
" it under the terms of the GNU General Public License as published by\n"
" the Free Software Foundation; either version 2, or (at your option)\n"
" any later version.\n"
"\n"
"\n"
" This program is distributed in the hope that it will be useful,\n"
" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
" GNU General Public License for more details.\n"
"\n"
"\n"
" You should have received a copy of the GNU General Public License\n"
" along with this program; if not, write to the Free Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
msgstr ""

#: standalone/drakfont:537
#, c-format
msgid ""
"Thanks:\n"
"\n"
"    -  pfm2afm:   \n"
"\t by Ken Borgendale:\n"
"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
"\n"
"    -  type1inst:\n"
"\t by James Macnicol: \n"
"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
"\n"
"    -  ttf2pt1:   \n"
"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
"             Convert ttf font files to afm and pfb fonts\n"
msgstr ""

#: standalone/drakfont:556
#, fuzzy, c-format
msgid "Choose the applications that will support the fonts:"
msgstr "เลือกพาร์ติชั่นที่คุณต้องการฟอร์แมต"

#: standalone/drakfont:557
#, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"You can install the fonts the normal way. In rare cases, bogus fonts may "
"hang up your X Server."
msgstr ""

#: standalone/drakfont:567
#, c-format
msgid "Ghostscript"
msgstr ""

#: standalone/drakfont:568
#, fuzzy, c-format
msgid "StarOffice"
msgstr "ดี"

#: standalone/drakfont:569
#, fuzzy, c-format
msgid "Abiword"
msgstr "เลิก"

#: standalone/drakfont:570
#, fuzzy, c-format
msgid "Generic Printers"
msgstr "เครื่องพิมพ์"

#: standalone/drakfont:586
#, c-format
msgid "Select the font file or directory and click on 'Add'"
msgstr ""

#: standalone/drakfont:587
#, fuzzy, c-format
msgid "File Selection"
msgstr "เลือกกลุ่มแพ็คเก็จ"

#: standalone/drakfont:600
#, fuzzy, c-format
msgid "You've not selected any font"
msgstr "ลบคิว"

#: standalone/drakfont:652
#, fuzzy, c-format
msgid "Import fonts"
msgstr "ฟอร์แมตพาร์ติชั่น"

#: standalone/drakfont:657
#, fuzzy, c-format
msgid "Install fonts"
msgstr "ติดตั้งระบบ"

#: standalone/drakfont:692
#, c-format
msgid "click here if you are sure."
msgstr ""

#: standalone/drakfont:694
#, c-format
msgid "here if no."
msgstr ""

#: standalone/drakfont:733
#, c-format
msgid "Unselected All"
msgstr ""

#: standalone/drakfont:736
#, fuzzy, c-format
msgid "Selected All"
msgstr "เลือกไฟล์"

#: standalone/drakfont:739
#, fuzzy, c-format
msgid "Remove List"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: standalone/drakfont:750 standalone/drakfont:769
#, fuzzy, c-format
msgid "Importing fonts"
msgstr "ฟอร์แมตพาร์ติชั่น"

#: standalone/drakfont:754 standalone/drakfont:774
#, fuzzy, c-format
msgid "Initial tests"
msgstr "ข้อความ init"

#: standalone/drakfont:755
#, fuzzy, c-format
msgid "Copy fonts on your system"
msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"

#: standalone/drakfont:756
#, c-format
msgid "Install & convert Fonts"
msgstr ""

#: standalone/drakfont:757
#, fuzzy, c-format
msgid "Post Install"
msgstr "ติดตั้ง"

#: standalone/drakfont:775
#, fuzzy, c-format
msgid "Remove fonts on your system"
msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"

#: standalone/drakfont:776
#, fuzzy, c-format
msgid "Post Uninstall"
msgstr "ออกจากการติดตั้ง"

#: standalone/drakgw:58 standalone/drakgw:193
#, c-format
msgid "Internet Connection Sharing"
msgstr "การเชื่อมต่อกับ Internet แบบ sharing"

#: standalone/drakgw:124
#, c-format
msgid "Internet Connection Sharing currently disabled"
msgstr "การติดต่อ internet แบบ share ถูกยกเลิกแล้ว"

#: standalone/drakgw:125
#, c-format
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""

#: standalone/drakgw:129 standalone/drakvpn:127
#, c-format
msgid "enable"
msgstr "enable"

#: standalone/drakgw:129 standalone/drakgw:156 standalone/drakvpn:101
#: standalone/drakvpn:127
#, c-format
msgid "reconfigure"
msgstr "คอนฟิกใหม่"

#: standalone/drakgw:129 standalone/drakgw:156 standalone/drakvpn:101
#: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735
#, c-format
msgid "dismiss"
msgstr "เลิก"

#: standalone/drakgw:136
#, c-format
msgid "Enabling servers..."
msgstr "เริ่มทำงาน server"

#: standalone/drakgw:148
#, c-format
msgid "Internet Connection Sharing is now enabled."
msgstr "การเชื่อมต่อกับ Internet แบบ sharing เริ่มทำงานแล้ว"

#: standalone/drakgw:151
#, c-format
msgid "Internet Connection Sharing currently enabled"
msgstr "การเชื่อมต่อ internet แบบ share ได้ทำงานแล้ว"

#: standalone/drakgw:152
#, c-format
msgid ""
"The setup of Internet Connection Sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""

#: standalone/drakgw:156 standalone/drakvpn:101
#, c-format
msgid "disable"
msgstr "disable"

#: standalone/drakgw:159
#, c-format
msgid "Disabling servers..."
msgstr "ยกเลิกการทำงานของ server"

#: standalone/drakgw:174
#, c-format
msgid "Internet Connection Sharing is now disabled."
msgstr "การเชื่อมต่อกับ Internet แบบ sharing ถูกยกเลิกแล้ว"

#: standalone/drakgw:194
#, fuzzy, c-format
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
"this computer's Internet connection.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"ขณะนี้การต่อเข้า internet ได้ทำการปรับแต่งเรียบร้อยแล้ว\n"
"คุณสามารถทำให้ผู้ใช้อื่นๆไช้ internet ร่วมกับคุณได้\n"
"(แต่คุณจำเป็นต้องมี Network Adapter เพื่อการต่อระบบ LAN )\n"
"\n"
"คุณต้องการให้ผู้อื่นใช้ internet ร่วมด้วยหรือไม่\n"

#: standalone/drakgw:237
#, c-format
msgid "Interface %s (using module %s)"
msgstr "Interface %s (using module %s)"

#: standalone/drakgw:238
#, c-format
msgid "Interface %s"
msgstr "Interface %s"

#: standalone/drakgw:247 standalone/drakpxe:137
#, c-format
msgid "No network adapter on your system!"
msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"

#: standalone/drakgw:254
#, c-format
msgid "Network interface"
msgstr "Network interface"

#: standalone/drakgw:255
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""
"ในเครื่องของคุณมี network adapter อันเดียวที่ได้รับการปรับแต่งแล้ว\n"
"\n"
"%s\n"
"\n"
"ผมกำลังจะใช้ adapter นี้กับระบบ LAN"

#: standalone/drakgw:262
#, c-format
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr "กรุณาเลือก network adapter ที่จะใช้กับระบบ LAN"

#: standalone/drakgw:291
#, fuzzy, c-format
msgid "Network interface already configured"
msgstr "ไม่มีการคอนฟิกจอภาพ"

#: standalone/drakgw:292
#, c-format
msgid ""
"Warning, the network adapter (%s) is already configured.\n"
"\n"
"Do you want an automatic re-configuration?\n"
"\n"
"You can do it manually but you need to know what you're doing."
msgstr ""

#: standalone/drakgw:297
#, fuzzy, c-format
msgid "Automatic reconfiguration"
msgstr "Boot Style Configuration"

#: standalone/drakgw:297
#, c-format
msgid "No (experts only)"
msgstr ""

#: standalone/drakgw:298
#, fuzzy, c-format
msgid "Show current interface configuration"
msgstr "การคอนฟิก Internet"

#: standalone/drakgw:299
#, fuzzy, c-format
msgid "Current interface configuration"
msgstr "การคอนฟิก Internet"

#: standalone/drakgw:300
#, c-format
msgid ""
"Current configuration of `%s':\n"
"\n"
"Network: %s\n"
"IP address: %s\n"
"IP attribution: %s\n"
"Driver: %s"
msgstr ""

#: standalone/drakgw:313
#, c-format
msgid ""
"I can keep your current configuration and assume you already set up a DHCP "
"server; in that case please verify I correctly read the Network that you use "
"for your local network; I will not reconfigure it and I will not touch your "
"DHCP server configuration.\n"
"\n"
"The default DNS entry is the Caching Nameserver configured on the firewall. "
"You can replace that with your ISP DNS IP, for example.\n"
"\t\t      \n"
"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
"for you.\n"
"\n"
msgstr ""

#: standalone/drakgw:320
#, fuzzy, c-format
msgid "Local Network adress"
msgstr "ไม่พบการ์ดเน็ตเวิร์ก"

#: standalone/drakgw:324
#, c-format
msgid ""
"DHCP Server Configuration.\n"
"\n"
"Here you can select different options for the DHCP server configuration.\n"
"If you don't know the meaning of an option, simply leave it as it is."
msgstr ""

#: standalone/drakgw:328
#, fuzzy, c-format
msgid "(This) DHCP Server IP"
msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"

#: standalone/drakgw:329
#, fuzzy, c-format
msgid "The DNS Server IP"
msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"

#: standalone/drakgw:330
#, fuzzy, c-format
msgid "The internal domain name"
msgstr "ไม่มีเครื่องพิมพ์"

#: standalone/drakgw:331
#, c-format
msgid "The DHCP start range"
msgstr ""

#: standalone/drakgw:332
#, c-format
msgid "The DHCP end range"
msgstr ""

#: standalone/drakgw:333
#, c-format
msgid "The default lease (in seconds)"
msgstr ""

#: standalone/drakgw:334
#, c-format
msgid "The maximum lease (in seconds)"
msgstr ""

#: standalone/drakgw:335
#, c-format
msgid "Re-configure interface and DHCP server"
msgstr ""

#: standalone/drakgw:342
#, c-format
msgid "The Local Network did not finish with `.0', bailing out."
msgstr ""

#: standalone/drakgw:352
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr "มีความขัดแย้งของ LAN address ซึ่งเจอในคอนฟิกปัจจุบันใน %s!\n"

#: standalone/drakgw:362
#, c-format
msgid "Configuring..."
msgstr "กำลังทำการคอนฟิก"

#: standalone/drakgw:363
#, c-format
msgid "Configuring scripts, installing software, starting servers..."
msgstr "กำลังปรับแต่ง scripts ติดตั้งโปรแกรม และเริ่มทำงาน servers..."

#: standalone/drakgw:403 standalone/drakpxe:231 standalone/drakvpn:278
#, c-format
msgid "Problems installing package %s"
msgstr "ปัญหาการติดตั้งแพ็คเก็จ %s"

#: standalone/drakgw:599
#, fuzzy, c-format
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP) and\n"
" a Transparent Proxy Cache server (SQUID)."
msgstr ""
"ทุกอย่างได้ถูกทำการปรับแต่งเรียบร้อยแล้ว\n"
"คุณสามารถใช้อินเตอร์เนตบนคอมพิวเตอร์อื่นๆใน LAN โดยใช้ (DHCP)"

#: standalone/drakhelp:17
#, c-format
msgid ""
" drakhelp 0.1\n"
"Copyright (C) 2003-2004 MandrakeSoft.\n"
"This is free software and may be redistributed under the terms of the GNU "
"GPL.\n"
"\n"
"Usage: \n"
msgstr ""

#: standalone/drakhelp:22
#, c-format
msgid " --help                - display this help     \n"
msgstr ""

#: standalone/drakhelp:23
#, c-format
msgid ""
" --id <id_label>       - load the html help page which refers to id_label\n"
msgstr ""

#: standalone/drakhelp:24
#, c-format
msgid ""
" --doc <link>          - link to another web page ( for WM welcome "
"frontend)\n"
msgstr ""

#: standalone/drakhelp:35
#, c-format
msgid ""
"%s cannot be displayed \n"
". No Help entry of this type\n"
msgstr ""

#: standalone/drakhelp:41
#, c-format
msgid ""
"No browser is installed on your system, Please install one if you want to "
"browse the help system"
msgstr ""

#: standalone/drakperm:21
#, fuzzy, c-format
msgid "System settings"
msgstr "กำลังพาร์ติชั่น Custom disk"

#: standalone/drakperm:22
#, fuzzy, c-format
msgid "Custom settings"
msgstr "กำลังพาร์ติชั่น Custom disk"

#: standalone/drakperm:23
#, fuzzy, c-format
msgid "Custom & system settings"
msgstr "กำลังพาร์ติชั่น Custom disk"

#: standalone/drakperm:43
#, fuzzy, c-format
msgid "Editable"
msgstr "disable"

#: standalone/drakperm:48 standalone/drakperm:318
#, c-format
msgid "Path"
msgstr ""

#: standalone/drakperm:48 standalone/drakperm:254
#, fuzzy, c-format
msgid "User"
msgstr "ชื่อผู้ใช้"

#: standalone/drakperm:48 standalone/drakperm:254
#, fuzzy, c-format
msgid "Group"
msgstr "เวิร์กกรุ๊ป (workgroup)"

#: standalone/drakperm:48 standalone/drakperm:330
#, fuzzy, c-format
msgid "Permissions"
msgstr "เวอร์ชั่น: %s\n"

#: standalone/drakperm:107
#, c-format
msgid ""
"Here you can see files to use in order to fix permissions, owners, and "
"groups via msec.\n"
"You can also edit your own rules which will owerwrite the default rules."
msgstr ""

#: standalone/drakperm:110
#, c-format
msgid ""
"The current security level is %s.\n"
"Select permissions to see/edit"
msgstr ""

#: standalone/drakperm:121
#, c-format
msgid "Up"
msgstr ""

#: standalone/drakperm:121
#, c-format
msgid "Move selected rule up one level"
msgstr ""

#: standalone/drakperm:122
#, fuzzy, c-format
msgid "Down"
msgstr "ทำเรียบร้อยแล้ว"

#: standalone/drakperm:122
#, c-format
msgid "Move selected rule down one level"
msgstr ""

#: standalone/drakperm:123
#, fuzzy, c-format
msgid "Add a rule"
msgstr "เพิ่ม 1 module"

#: standalone/drakperm:123
#, fuzzy, c-format
msgid "Add a new rule at the end"
msgstr "ไม่มีเครื่องพิมพ์"

#: standalone/drakperm:124
#, fuzzy, c-format
msgid "Delete selected rule"
msgstr "ลบคิว"

#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/drakperm:125 standalone/drakups:281 standalone/drakups:330
#: standalone/drakups:350 standalone/drakvpn:333 standalone/drakvpn:694
#: standalone/printerdrake:233
#, fuzzy, c-format
msgid "Edit"
msgstr "Ext2"

#: standalone/drakperm:125
#, c-format
msgid "Edit current rule"
msgstr ""

#: standalone/drakperm:246
#, c-format
msgid "browse"
msgstr ""

#: standalone/drakperm:256
#, fuzzy, c-format
msgid "Read"
msgstr "เรียกอีกครั้ง"

#: standalone/drakperm:257
#, c-format
msgid "Enable \"%s\" to read the file"
msgstr ""

#: standalone/drakperm:260
#, fuzzy, c-format
msgid "Write"
msgstr "XFree %s"

#: standalone/drakperm:261
#, c-format
msgid "Enable \"%s\" to write the file"
msgstr ""

#: standalone/drakperm:264
#, c-format
msgid "Execute"
msgstr ""

#: standalone/drakperm:265
#, c-format
msgid "Enable \"%s\" to execute the file"
msgstr ""

#: standalone/drakperm:267
#, c-format
msgid "Sticky-bit"
msgstr ""

#: standalone/drakperm:267
#, c-format
msgid ""
"Used for directory:\n"
" only owner of directory or file in this directory can delete it"
msgstr ""

#: standalone/drakperm:268
#, c-format
msgid "Set-UID"
msgstr ""

#: standalone/drakperm:268
#, fuzzy, c-format
msgid "Use owner id for execution"
msgstr "ใช้ auto detection"

#: standalone/drakperm:269
#, c-format
msgid "Set-GID"
msgstr ""

#: standalone/drakperm:269
#, fuzzy, c-format
msgid "Use group id for execution"
msgstr "ใช้ auto detection"

#: standalone/drakperm:287 standalone/drakxtv:87
#, fuzzy, c-format
msgid "User :"
msgstr "ชื่อผู้ใช้"

#: standalone/drakperm:289
#, fuzzy, c-format
msgid "Group :"
msgstr "เวิร์กกรุ๊ป (workgroup)"

#: standalone/drakperm:293
#, fuzzy, c-format
msgid "Current user"
msgstr "ยอมรับผู้ใช้"

#: standalone/drakperm:294
#, c-format
msgid "When checked, owner and group won't be changed"
msgstr ""

#: standalone/drakperm:304
#, fuzzy, c-format
msgid "Path selection"
msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"

#: standalone/drakperm:324
#, fuzzy, c-format
msgid "Property"
msgstr "Port"

#: standalone/drakpxe:55
#, fuzzy, c-format
msgid "PXE Server Configuration"
msgstr "การปรับแต่ง LAN"

#: standalone/drakpxe:111
#, fuzzy, c-format
msgid "Installation Server Configuration"
msgstr "การปรับแต่ง LAN"

#: standalone/drakpxe:112
#, fuzzy, c-format
msgid ""
"You are about to configure your computer to install a PXE server as a DHCP "
"server\n"
"and a TFTP server to build an installation server.\n"
"With that feature, other computers on your local network will be installable "
"using this computer as source.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"ขณะนี้การต่อเข้า internet ได้ทำการปรับแต่งเรียบร้อยแล้ว\n"
"คุณสามารถทำให้ผู้ใช้อื่นๆไช้ internet ร่วมกับคุณได้\n"
"(แต่คุณจำเป็นต้องมี Network Adapter เพื่อการต่อระบบ LAN )\n"
"\n"
"คุณต้องการให้ผู้อื่นใช้ internet ร่วมด้วยหรือไม่\n"

#: standalone/drakpxe:143
#, fuzzy, c-format
msgid "Please choose which network interface will be used for the dhcp server."
msgstr "กรุณาเลือก Network Adaptor สำหรับการต่อเข้า Internet"

#: standalone/drakpxe:144
#, fuzzy, c-format
msgid "Interface %s (on network %s)"
msgstr "Interface %s (using module %s)"

#: standalone/drakpxe:169
#, c-format
msgid ""
"The DHCP server will allow other computer to boot using PXE in the given "
"range of address.\n"
"\n"
"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""

#: standalone/drakpxe:173
#, c-format
msgid "The DHCP start ip"
msgstr ""

#: standalone/drakpxe:174
#, c-format
msgid "The DHCP end ip"
msgstr ""

#: standalone/drakpxe:187
#, c-format
msgid ""
"Please indicate where the installation image will be available.\n"
"\n"
"If you do not have an existing directory, please copy the CD or DVD "
"contents.\n"
"\n"
msgstr ""

#: standalone/drakpxe:192
#, fuzzy, c-format
msgid "Installation image directory"
msgstr "การปรับแต่ง LAN"

#: standalone/drakpxe:196
#, fuzzy, c-format
msgid "No image found"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/drakpxe:197
#, c-format
msgid ""
"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""

#: standalone/drakpxe:210
#, c-format
msgid ""
"Please indicate where the auto_install.cfg file is located.\n"
"\n"
"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
msgstr ""

#: standalone/drakpxe:215
#, fuzzy, c-format
msgid "Location of auto_install.cfg file"
msgstr "กำลังเตรียมการติดตั้งลงบน floppy"

#: standalone/draksec:44
#, c-format
msgid "ALL"
msgstr ""

#: standalone/draksec:44
#, c-format
msgid "LOCAL"
msgstr ""

#: standalone/draksec:44 standalone/drakvpn:1146
#, c-format
msgid "default"
msgstr "default"

#: standalone/draksec:44
#, fuzzy, c-format
msgid "ignore"
msgstr "ไม่มี"

#: standalone/draksec:44
#, fuzzy, c-format
msgid "no"
msgstr "ข้อมูล"

#: standalone/draksec:44
#, fuzzy, c-format
msgid "yes"
msgstr "ใช่"

#. -PO: Do not alter the <span ..> and </span> tags
#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words
#: standalone/draksec:81
#, c-format
msgid ""
"Here, you can setup the security level and administrator of your machine.\n"
"\n"
"\n"
"The Security Administrator is the one who will receive security alerts if "
"the\n"
"'Security Alerts' option is set. It can be a username or an email.\n"
"\n"
"\n"
"The Security Level menu allows you to select one of the six preconfigured "
"security levels\n"
"provided with msec. These levels range from poor security and ease of use, "
"to\n"
"paranoid config, suitable for very sensitive server applications:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
"very\n"
"easy to use security level. It should only be used for machines not "
"connected to\n"
"any network and that are not accessible to everybody.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
"security\n"
"recommended for a computer that will be used to connect to the Internet as "
"a\n"
"client.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">High</span>: There are already some\n"
"restrictions, and more automatic checks are run every night.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
"enough\n"
"to use the system as a server which can accept connections from many "
"clients. If\n"
"your machine is only a client on the Internet, you should choose a lower "
"level.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
"previous\n"
"level, but the system is entirely closed and security features are at their\n"
"maximum"
msgstr ""

#: standalone/draksec:129
#, fuzzy, c-format
msgid "(default value: %s)"
msgstr " (Default)"

#: standalone/draksec:170
#, fuzzy, c-format
msgid "Security Level:"
msgstr "เลือกระดับระบบรักษาความปลอดภัย"

#: standalone/draksec:173
#, fuzzy, c-format
msgid "Security Alerts:"
msgstr "เลือกระดับระบบรักษาความปลอดภัย"

#: standalone/draksec:177
#, fuzzy, c-format
msgid "Security Administrator:"
msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"

#: standalone/draksec:179
#, fuzzy, c-format
msgid "Basic options"
msgstr "/Options/ทดลอง"

#: standalone/draksec:192
#, c-format
msgid ""
"The following options can be set to customize your\n"
"system security. If you need an explanation, look at the help tooltip.\n"
msgstr ""

#: standalone/draksec:194
#, fuzzy, c-format
msgid "Network Options"
msgstr "อ๊อปชั่นของโมดูล:"

#: standalone/draksec:194
#, fuzzy, c-format
msgid "System Options"
msgstr "อ๊อปชั่นของโมดูล:"

#: standalone/draksec:240
#, c-format
msgid "Periodic Checks"
msgstr ""

#: standalone/draksec:258
#, fuzzy, c-format
msgid "Please wait, setting security level..."
msgstr "เลือกระดับระบบรักษาความปลอดภัย"

#: standalone/draksec:264
#, fuzzy, c-format
msgid "Please wait, setting security options..."
msgstr "กำลังเตรียมการติดตั้ง"

#: standalone/draksound:47
#, fuzzy, c-format
msgid "No Sound Card detected!"
msgstr "ไม่เชื่อมต่อ"

#: standalone/draksound:48
#, c-format
msgid ""
"No Sound Card has been detected on your machine. Please verify that a Linux-"
"supported Sound Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""

#: standalone/draksound:55
#, c-format
msgid ""
"\n"
"\n"
"\n"
"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
msgstr ""

#: standalone/draksplash:21
#, c-format
msgid ""
"package 'ImageMagick' is required to be able to complete configuration.\n"
"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""

#: standalone/draksplash:68
#, fuzzy, c-format
msgid "first step creation"
msgstr "สร้าง boot disk"

#: standalone/draksplash:71
#, fuzzy, c-format
msgid "final resolution"
msgstr "ขนาดจอภาพ"

#: standalone/draksplash:72
#, fuzzy, c-format
msgid "choose image file"
msgstr "เลือกกิจกรรม"

#: standalone/draksplash:73
#, fuzzy, c-format
msgid "Theme name"
msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"

#: standalone/draksplash:78
#, c-format
msgid "Browse"
msgstr "ค้นหา"

#: standalone/draksplash:93 standalone/draksplash:158
#, fuzzy, c-format
msgid "Configure bootsplash picture"
msgstr "ปรับแต่งการบริการต่างๆ"

#: standalone/draksplash:96
#, c-format
msgid ""
"x coordinate of text box\n"
"in number of characters"
msgstr ""

#: standalone/draksplash:97
#, c-format
msgid ""
"y coordinate of text box\n"
"in number of characters"
msgstr ""

#: standalone/draksplash:98
#, c-format
msgid "text width"
msgstr ""

#: standalone/draksplash:99
#, c-format
msgid "text box height"
msgstr ""

#: standalone/draksplash:100
#, c-format
msgid ""
"the progress bar x coordinate\n"
"of its upper left corner"
msgstr ""

#: standalone/draksplash:101
#, c-format
msgid ""
"the progress bar y coordinate\n"
"of its upper left corner"
msgstr ""

#: standalone/draksplash:102
#, c-format
msgid "the width of the progress bar"
msgstr ""

#: standalone/draksplash:103
#, c-format
msgid "the height of the progress bar"
msgstr ""

#: standalone/draksplash:104
#, c-format
msgid "the color of the progress bar"
msgstr ""

#: standalone/draksplash:119
#, fuzzy, c-format
msgid "Preview"
msgstr "อุปกรณ์"

#: standalone/draksplash:121
#, fuzzy, c-format
msgid "Save theme"
msgstr "ติดตั้งระบบ"

#: standalone/draksplash:122
#, fuzzy, c-format
msgid "Choose color"
msgstr "เลือกจอภาพ"

#: standalone/draksplash:125
#, c-format
msgid "Display logo on Console"
msgstr ""

#: standalone/draksplash:126
#, c-format
msgid "Make kernel message quiet by default"
msgstr ""

#: standalone/draksplash:161 standalone/draksplash:319
#: standalone/draksplash:464
#, fuzzy, c-format
msgid "Notice"
msgstr "NoVideo"

#: standalone/draksplash:161 standalone/draksplash:319
#, c-format
msgid "This theme does not yet have a bootsplash in %s !"
msgstr ""

#: standalone/draksplash:167
#, fuzzy, c-format
msgid "choose image"
msgstr "เลือกกิจกรรม"

#: standalone/draksplash:209
#, c-format
msgid "saving Bootsplash theme..."
msgstr ""

#: standalone/draksplash:445
#, fuzzy, c-format
msgid "ProgressBar color selection"
msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"

#: standalone/draksplash:464
#, fuzzy, c-format
msgid "You must choose an image file first!"
msgstr "อุปกรณ์เครื่องพิมพ์ URI"

#: standalone/draksplash:469
#, fuzzy, c-format
msgid "Generating preview ..."
msgstr "กำลังตรวจสอบอุปกรณ์..."

#. -PO:  First %s is theme name, second %s (in parenthesis) is resolution
#: standalone/draksplash:515
#, c-format
msgid "%s BootSplash (%s) preview"
msgstr ""

#: standalone/drakups:63
#, c-format
msgid "Connected through a serial port or an usb cable"
msgstr ""

#: standalone/drakups:69
#, fuzzy, c-format
msgid "Add an UPS device"
msgstr "เพิ่มผู้ใช้"

#: standalone/drakups:72
#, c-format
msgid ""
"Welcome to the UPS configuration utility.\n"
"\n"
"Here, you'll be add a new UPS to your system.\n"
msgstr ""

#: standalone/drakups:79
#, c-format
msgid ""
"We're going to add an UPS device.\n"
"\n"
"Do you prefer autodetect UPS devices connected to this machine or  ?"
msgstr ""

#: standalone/drakups:82
#, fuzzy, c-format
msgid "Autodetection"
msgstr "ใช้ auto detection"

#: standalone/drakups:90 standalone/harddrake2:140
#, fuzzy, c-format
msgid "Detection in progress"
msgstr "ค้นหาเจอบน port %s"

#: standalone/drakups:108 standalone/drakups:144 standalone/logdrake:479
#: standalone/logdrake:485
#, fuzzy, c-format
msgid "Congratulations"
msgstr "ขอแสดงความยินดี"

#: standalone/drakups:109
#, c-format
msgid "The wizard successfully added the following UPS devices:"
msgstr ""

#: standalone/drakups:111
#, fuzzy, c-format
msgid "No new UPS devices was found"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/drakups:116 standalone/drakups:128
#, fuzzy, c-format
msgid "UPS driver configuration"
msgstr "การคอนฟิก Internet"

#: standalone/drakups:116
#, fuzzy, c-format
msgid "Please select your UPS model."
msgstr "กรุณาทดสอบเม้าส์"

#: standalone/drakups:117
#, c-format
msgid "Manufacturer / Model:"
msgstr ""

#: standalone/drakups:128
#, c-format
msgid ""
"We are configuring the \"%s\" UPS from \"%s\".\n"
"Please fill in its name, its driver and its port."
msgstr ""

#: standalone/drakups:133
#, c-format
msgid "Name:"
msgstr "ชื่อ:"

#: standalone/drakups:133
#, c-format
msgid "The name of your ups"
msgstr ""

#: standalone/drakups:134
#, c-format
msgid "The driver that manage your ups"
msgstr ""

#: standalone/drakups:135
#, fuzzy, c-format
msgid "Port:"
msgstr "Port"

#: standalone/drakups:137
#, fuzzy, c-format
msgid "The port on which is connected your ups"
msgstr "เม้าส์ของคุณต่อเข้ากับพอร์ตอนุกรมใด"

#: standalone/drakups:144
#, c-format
msgid "The wizard successfully configured the new \"%s\" UPS device."
msgstr ""

#: standalone/drakups:232
#, fuzzy, c-format
msgid "UPS devices"
msgstr "อุปกรณ์"

#: standalone/drakups:233 standalone/drakups:251 standalone/drakups:266
#: standalone/harddrake2:67
#, c-format
msgid "Name"
msgstr "ชื่อ"

#: standalone/drakups:250
#, fuzzy, c-format
msgid "UPS users"
msgstr "ชื่อผู้ใช้"

#: standalone/drakups:265
#, c-format
msgid "Access Control Lists"
msgstr ""

#: standalone/drakups:266
#, c-format
msgid "IP mask"
msgstr ""

#: standalone/drakups:277
#, fuzzy, c-format
msgid "Rules"
msgstr "ไม่ยอมรับ"

#: standalone/drakups:278
#, fuzzy, c-format
msgid "Action"
msgstr "/_Options"

#: standalone/drakups:278 standalone/drakvpn:1146 standalone/harddrake2:61
#, fuzzy, c-format
msgid "Level"
msgstr "ระดับ"

#: standalone/drakups:278
#, fuzzy, c-format
msgid "ACL name"
msgstr "ชื่อ LVM"

#: standalone/drakups:297 standalone/drakups:301 standalone/drakups:310
#, fuzzy, c-format
msgid "DrakUPS"
msgstr "Dvorak (US)"

#: standalone/drakups:307
#, fuzzy, c-format
msgid "Welcome to the UPS configuration tools"
msgstr "ทดสอบการคอนฟิก"

#: standalone/drakvpn:73
#, fuzzy, c-format
msgid "DrakVPN"
msgstr "Dvorak (US)"

#: standalone/drakvpn:95
#, fuzzy, c-format
msgid "The VPN connection is enabled."
msgstr "การเชื่อมต่อกับ Internet แบบ sharing เริ่มทำงานแล้ว"

#: standalone/drakvpn:96
#, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently enabled.\n"
"\n"
"What would you like to do ?"
msgstr ""

#: standalone/drakvpn:105
#, fuzzy, c-format
msgid "Disabling VPN..."
msgstr "ยกเลิกการทำงานของ server"

#: standalone/drakvpn:114
#, fuzzy, c-format
msgid "The VPN connection is now disabled."
msgstr "การเชื่อมต่อกับ Internet แบบ sharing ถูกยกเลิกแล้ว"

#: standalone/drakvpn:121
#, fuzzy, c-format
msgid "VPN connection currently disabled"
msgstr "การติดต่อ internet แบบ share ถูกยกเลิกแล้ว"

#: standalone/drakvpn:122
#, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently disabled.\n"
"\n"
"What would you like to do ?"
msgstr ""

#: standalone/drakvpn:135
#, fuzzy, c-format
msgid "Enabling VPN..."
msgstr "เริ่มทำงาน server"

#: standalone/drakvpn:141
#, fuzzy, c-format
msgid "The VPN connection is now enabled."
msgstr "การเชื่อมต่อกับ Internet แบบ sharing เริ่มทำงานแล้ว"

#: standalone/drakvpn:155 standalone/drakvpn:183
#, c-format
msgid "Simple VPN setup."
msgstr ""

#: standalone/drakvpn:156
#, c-format
msgid ""
"You are about to configure your computer to use a VPN connection.\n"
"\n"
"With this feature, computers on your local private network and computers\n"
"on some other remote private networks, can share resources, through\n"
"their respective firewalls, over the Internet, in a secure manner. \n"
"\n"
"The communication over the Internet is encrypted. The local and remote\n"
"computers look as if they were on the same network.\n"
"\n"
"Make sure you have configured your Network/Internet access using\n"
"drakconnect before going any further."
msgstr ""

#: standalone/drakvpn:184
#, c-format
msgid ""
"VPN connection.\n"
"\n"
"This program is based on the following projects:\n"
" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
" - the docs and man pages coming with the %s package\n"
"\n"
"Please read AT LEAST the ipsec-howto docs\n"
"before going any further."
msgstr ""

#: standalone/drakvpn:196
#, fuzzy, c-format
msgid "Kernel module."
msgstr "ลบทิ้ง 1 module"

#: standalone/drakvpn:197
#, c-format
msgid ""
"The kernel need to have ipsec support.\n"
"\n"
"You're running a %s kernel version.\n"
"\n"
"This kernel has '%s' support."
msgstr ""

#: standalone/drakvpn:292
#, fuzzy, c-format
msgid "Security Policies"
msgstr "เลือกระดับระบบรักษาความปลอดภัย"

#: standalone/drakvpn:292
#, c-format
msgid "IKE daemon racoon"
msgstr ""

#: standalone/drakvpn:295 standalone/drakvpn:306
#, fuzzy, c-format
msgid "Configuration file"
msgstr "การปรับแต่ง LAN"

#: standalone/drakvpn:296
#, c-format
msgid ""
"Configuration step !\n"
"\n"
"You need to define the Security Policies and then to \n"
"configure the automatic key exchange (IKE) daemon. \n"
"The KAME IKE daemon we're using is called 'racoon'.\n"
"\n"
"What would you like to configure ?\n"
msgstr ""

#: standalone/drakvpn:307
#, c-format
msgid ""
"Next, we will configure the %s file.\n"
"\n"
"\n"
"Simply click on Next.\n"
msgstr ""

#: standalone/drakvpn:325 standalone/drakvpn:685
#, fuzzy, c-format
msgid "%s entries"
msgstr ", %s เซ็กเตอร์"

#: standalone/drakvpn:326
#, c-format
msgid ""
"The %s file contents\n"
"is divided into sections.\n"
"\n"
"You can now :\n"
"\n"
"  - display, add, edit, or remove sections, then\n"
"  - commit the changes\n"
"\n"
"What would you like to do ?\n"
msgstr ""

#: standalone/drakvpn:333 standalone/drakvpn:694
#, fuzzy, c-format
msgid ""
"_:display here is a verb\n"
"Display"
msgstr "เรียกอีกครั้ง"

#: standalone/drakvpn:333 standalone/drakvpn:694
#, fuzzy, c-format
msgid "Commit"
msgstr "แบบอัด (compact)"

#: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709
#: standalone/drakvpn:713
#, fuzzy, c-format
msgid ""
"_:display here is a verb\n"
"Display configuration"
msgstr "การปรับแต่ง LAN"

#: standalone/drakvpn:352
#, c-format
msgid ""
"The %s file does not exist.\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose 'add'.\n"
msgstr ""

#: standalone/drakvpn:368
#, c-format
msgid "ipsec.conf entries"
msgstr ""

#: standalone/drakvpn:369
#, c-format
msgid ""
"The %s file contains different sections.\n"
"\n"
"Here is its skeleton :\t'config setup' \n"
"\t\t\t\t\t'conn default' \n"
"\t\t\t\t\t'normal1'\n"
"\t\t\t\t\t'normal2' \n"
"\n"
"You can now add one of these sections.\n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""

#: standalone/drakvpn:376
#, fuzzy, c-format
msgid "config setup"
msgstr "คอนฟิกใหม่"

#: standalone/drakvpn:376
#, fuzzy, c-format
msgid "conn %default"
msgstr "default"

#: standalone/drakvpn:376
#, fuzzy, c-format
msgid "normal conn"
msgstr "โหมดธรรมดา"

#: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510
#, fuzzy, c-format
msgid "Exists !"
msgstr "Ext2"

#: standalone/drakvpn:383 standalone/drakvpn:424
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change its name.\n"
msgstr ""

#: standalone/drakvpn:400
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow this config\n"
"setup section.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:405
#, fuzzy, c-format
msgid "interfaces"
msgstr "Interface"

#: standalone/drakvpn:406
#, c-format
msgid "klipsdebug"
msgstr ""

#: standalone/drakvpn:407
#, c-format
msgid "plutodebug"
msgstr ""

#: standalone/drakvpn:408
#, c-format
msgid "plutoload"
msgstr ""

#: standalone/drakvpn:409
#, c-format
msgid "plutostart"
msgstr ""

#: standalone/drakvpn:410
#, c-format
msgid "uniqueids"
msgstr ""

#: standalone/drakvpn:444
#, c-format
msgid ""
"This is the first section after the config\n"
"setup one.\n"
"\n"
"Here you define the default settings. \n"
"All the other sections will follow this one.\n"
"The left settings are optional. If don't define\n"
"them here, globally, you can define them in each\n"
"section.\n"
msgstr ""

#: standalone/drakvpn:451
#, fuzzy, c-format
msgid "PFS"
msgstr "HFS"

#: standalone/drakvpn:452
#, c-format
msgid "keyingtries"
msgstr ""

#: standalone/drakvpn:453
#, c-format
msgid "compress"
msgstr ""

#: standalone/drakvpn:454
#, c-format
msgid "disablearrivalcheck"
msgstr ""

#: standalone/drakvpn:455 standalone/drakvpn:494
#, fuzzy, c-format
msgid "left"
msgstr "ลบ"

#: standalone/drakvpn:456 standalone/drakvpn:495
#, c-format
msgid "leftcert"
msgstr ""

#: standalone/drakvpn:457 standalone/drakvpn:496
#, c-format
msgid "leftrsasigkey"
msgstr ""

#: standalone/drakvpn:458 standalone/drakvpn:497
#, c-format
msgid "leftsubnet"
msgstr ""

#: standalone/drakvpn:459 standalone/drakvpn:498
#, c-format
msgid "leftnexthop"
msgstr ""

#: standalone/drakvpn:488
#, c-format
msgid ""
"Your %s file has several sections, or connections.\n"
"\n"
"You can now add a new section.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:491
#, fuzzy, c-format
msgid "section name"
msgstr "ชื่อการเชื่อมต่อ"

#: standalone/drakvpn:492
#, c-format
msgid "authby"
msgstr ""

#: standalone/drakvpn:493
#, fuzzy, c-format
msgid "auto"
msgstr "เลิก"

#: standalone/drakvpn:499
#, fuzzy, c-format
msgid "right"
msgstr "สูง"

#: standalone/drakvpn:500
#, fuzzy, c-format
msgid "rightcert"
msgstr "สูง"

#: standalone/drakvpn:501
#, c-format
msgid "rightrsasigkey"
msgstr ""

#: standalone/drakvpn:502
#, c-format
msgid "rightsubnet"
msgstr ""

#: standalone/drakvpn:503
#, c-format
msgid "rightnexthop"
msgstr ""

#: standalone/drakvpn:511
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change the name of the section.\n"
msgstr ""

#: standalone/drakvpn:543
#, c-format
msgid ""
"Add a Security Policy.\n"
"\n"
"You can now add a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:576 standalone/drakvpn:826
#, fuzzy, c-format
msgid "Edit section"
msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"

#: standalone/drakvpn:577
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to edit \n"
"and then click on next.\n"
msgstr ""

#: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831
#: standalone/drakvpn:877
#, fuzzy, c-format
msgid "Section names"
msgstr "ชื่อการเชื่อมต่อ"

#: standalone/drakvpn:590
#, fuzzy, c-format
msgid "Can't edit !"
msgstr "Adapter %s: %s"

#: standalone/drakvpn:591
#, c-format
msgid ""
"You cannot edit this section.\n"
"\n"
"This section is mandatory for Freswan 2.X.\n"
"One has to specify version 2.0 on the top\n"
"of the %s file, and eventually, disable or\n"
"enable the oportunistic encryption.\n"
msgstr ""

#: standalone/drakvpn:600
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the config setup section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:611
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the default section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:624
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the normal section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:645
#, c-format
msgid ""
"Edit a Security Policy.\n"
"\n"
"You can now add a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:656 standalone/drakvpn:873
#, fuzzy, c-format
msgid "Remove section"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: standalone/drakvpn:657 standalone/drakvpn:874
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to remove\n"
"and then click on next.\n"
msgstr ""

#: standalone/drakvpn:686
#, c-format
msgid ""
"The racoon.conf file configuration.\n"
"\n"
"The contents of this file is divided into sections.\n"
"You can now :\n"
"  - display \t\t (display the file contents)\n"
"  - add\t\t\t (add one section)\n"
"  - edit \t\t\t (modify parameters of an existing section)\n"
"  - remove \t\t (remove an existing section)\n"
"  - commit \t\t (writes the changes to the real file)"
msgstr ""

#: standalone/drakvpn:714
#, c-format
msgid ""
"The %s file does not exist\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose configure.\n"
msgstr ""

#: standalone/drakvpn:728
#, c-format
msgid "racoonf.conf entries"
msgstr ""

#: standalone/drakvpn:729
#, c-format
msgid ""
"The 'add' sections step.\n"
"\n"
"Here below is the racoon.conf file skeleton :\n"
"\t'path'\n"
"\t'remote'\n"
"\t'sainfo' \n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""

#: standalone/drakvpn:735
#, c-format
msgid "path"
msgstr ""

#: standalone/drakvpn:735
#, fuzzy, c-format
msgid "remote"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: standalone/drakvpn:735
#, fuzzy, c-format
msgid "sainfo"
msgstr "ข้อมูล"

#: standalone/drakvpn:743
#, c-format
msgid ""
"The 'add path' section step.\n"
"\n"
"The path sections have to be on top of your racoon.conf file.\n"
"\n"
"Put your mouse over the certificate entry to obtain online help."
msgstr ""

#: standalone/drakvpn:746
#, fuzzy, c-format
msgid "path type"
msgstr "เปลี่ยนประเภทพาร์ติชั่น"

#: standalone/drakvpn:750
#, c-format
msgid ""
"path include path : specifies a path to include\n"
"a file. See File Inclusion.\n"
"\tExample: path include '/etc/racoon'\n"
"\n"
"path pre_shared_key file : specifies a file containing\n"
"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
"\n"
"path certificate path : racoon(8) will search this directory\n"
"if a certificate or certificate request is received.\n"
"\tExample: path certificate '/etc/cert' ;\n"
"\n"
"File Inclusion : include file \n"
"other configuration files can be included.\n"
"\tExample: include \"remote.conf\" ;\n"
"\n"
"Pre-shared key File : Pre-shared key file defines a pair\n"
"of the identifier and the shared secret key which are used at\n"
"Pre-shared key authentication method in phase 1."
msgstr ""

#: standalone/drakvpn:770 standalone/drakvpn:863
#, fuzzy, c-format
msgid "real file"
msgstr "เลือกไฟล์"

#: standalone/drakvpn:793
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your racoon.conf file.\n"
"\n"
"You can now choose the remote settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:810
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your %s file.\n"
"\n"
"You can now choose the sainfo settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:827
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here in the list below the one you want\n"
"to edit and then click on next.\n"
msgstr ""

#: standalone/drakvpn:838
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"\n"
"You can now edit the remote section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:847
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the sainfo section entries.\n"
"\n"
"Choose continue when you are done to write the data."
msgstr ""

#: standalone/drakvpn:855
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow these path\n"
"sections.\n"
"\n"
"You can now edit the path entries.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:862
#, c-format
msgid "path_type"
msgstr ""

#: standalone/drakvpn:903
#, c-format
msgid ""
"Everything has been configured.\n"
"\n"
"You may now share resources through the Internet,\n"
"in a secure way, using a VPN connection.\n"
"\n"
"You should make sure that that the tunnels shorewall\n"
"section is configured."
msgstr ""

#: standalone/drakvpn:923
#, c-format
msgid "Sainfo source address"
msgstr ""

#: standalone/drakvpn:924
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples : \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.209 is the source address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.1.0/24 is the source address"
msgstr ""

#: standalone/drakvpn:941
#, fuzzy, c-format
msgid "Sainfo source protocol"
msgstr "Boot Protocol"

#: standalone/drakvpn:942
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples : \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe first 'any' allows any protocol for the source"
msgstr ""

#: standalone/drakvpn:956
#, c-format
msgid "Sainfo destination address"
msgstr ""

#: standalone/drakvpn:957
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples : \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.218 is the destination address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.2.0/24 is the destination address"
msgstr ""

#: standalone/drakvpn:974
#, c-format
msgid "Sainfo destination protocol"
msgstr ""

#: standalone/drakvpn:975
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples : \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe last 'any' allows any protocol for the destination"
msgstr ""

#: standalone/drakvpn:989
#, c-format
msgid "PFS group"
msgstr ""

#: standalone/drakvpn:991
#, c-format
msgid ""
"define the group of Diffie-Hellman exponentiations.\n"
"If you do not require PFS then you can omit this directive.\n"
"Any proposal will be accepted if you do not specify one.\n"
"group is one of following: modp768, modp1024, modp1536.\n"
"Or you can define 1, 2, or 5 as the DH group number."
msgstr ""

#: standalone/drakvpn:996
#, fuzzy, c-format
msgid "Lifetime number"
msgstr "หมายเลขโทรศัพท์"

#: standalone/drakvpn:997
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will be not proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples : \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour;\n"
"\n"
"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
msgstr ""

#: standalone/drakvpn:1013
#, c-format
msgid "Lifetime unit"
msgstr ""

#: standalone/drakvpn:1015
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will be not proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples : \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour ;\n"
"\n"
"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
"'hour'.\n"
msgstr ""

#: standalone/drakvpn:1031 standalone/drakvpn:1116
#, fuzzy, c-format
msgid "Encryption algorithm"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#: standalone/drakvpn:1033
#, fuzzy, c-format
msgid "Authentication algorithm"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#: standalone/drakvpn:1035
#, c-format
msgid "Compression algorithm"
msgstr ""

#: standalone/drakvpn:1036
#, fuzzy, c-format
msgid "deflate"
msgstr "default"

#: standalone/drakvpn:1043
#, fuzzy, c-format
msgid "Remote"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: standalone/drakvpn:1044
#, c-format
msgid ""
"remote (address | anonymous) [[port]] { statements }\n"
"specifies the parameters for IKE phase 1 for each remote node.\n"
"The default port is 500.  If anonymous is specified, the state-\n"
"ments apply to all peers which do not match any other remote\n"
"directive.\n"
"\n"
"Examples : \n"
"\n"
"remote anonymous\n"
"remote ::1 [8000]"
msgstr ""

#: standalone/drakvpn:1052
#, fuzzy, c-format
msgid "Exchange mode"
msgstr "การหมุนโทรศัพท์ด้วยโมเด็ม"

#: standalone/drakvpn:1054
#, c-format
msgid ""
"defines the exchange mode for phase 1 when racoon is the\n"
"initiator. Also it means the acceptable exchange mode\n"
"when racoon is responder. More than one mode can be\n"
"specified by separating them with a comma. All of the\n"
"modes are acceptable. The first exchange mode is what\n"
"racoon uses when it is the initiator.\n"
msgstr ""

#: standalone/drakvpn:1060
#, fuzzy, c-format
msgid "Generate policy"
msgstr "ระบบความป้องกัน"

#: standalone/drakvpn:1061 standalone/drakvpn:1077 standalone/drakvpn:1090
#, c-format
msgid "off"
msgstr ""

#: standalone/drakvpn:1061 standalone/drakvpn:1077 standalone/drakvpn:1090
#, fuzzy, c-format
msgid "on"
msgstr "ทำเรียบร้อยแล้ว"

#: standalone/drakvpn:1062
#, c-format
msgid ""
"This directive is for the responder.  Therefore you\n"
"should set passive on in order that racoon(8) only\n"
"becomes a responder.  If the responder does not have any\n"
"policy in SPD during phase 2 negotiation, and the direc-\n"
"tive is set on, then racoon(8) will choice the first pro-\n"
"posal in the SA payload from the initiator, and generate\n"
"policy entries from the proposal.  It is useful to nego-\n"
"tiate with the client which is allocated IP address\n"
"dynamically.  Note that inappropriate policy might be\n"
"installed into the responder's SPD by the initiator.  So\n"
"that other communication might fail if such policies\n"
"installed due to some policy mismatches between the ini-\n"
"tiator and the responder.  This directive is ignored in\n"
"the initiator case.  The default value is off."
msgstr ""

#: standalone/drakvpn:1076
#, fuzzy, c-format
msgid "Passive"
msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"

#: standalone/drakvpn:1078
#, c-format
msgid ""
"If you do not want to initiate the negotiation, set this\n"
"to on.  The default value is off.  It is useful for a\n"
"server."
msgstr ""

#: standalone/drakvpn:1081
#, c-format
msgid "Certificate type"
msgstr ""

#: standalone/drakvpn:1083
#, fuzzy, c-format
msgid "My certfile"
msgstr "เลือกไฟล์"

#: standalone/drakvpn:1084
#, fuzzy, c-format
msgid "Name of the certificate"
msgstr "ชื่อเครื่องพิมพ์"

#: standalone/drakvpn:1085
#, c-format
msgid "My private key"
msgstr ""

#: standalone/drakvpn:1086
#, fuzzy, c-format
msgid "Name of the private key"
msgstr "ชื่อเครื่องพิมพ์"

#: standalone/drakvpn:1087
#, fuzzy, c-format
msgid "Peers certfile"
msgstr "เลือกไฟล์"

#: standalone/drakvpn:1088
#, c-format
msgid "Name of the peers certificate"
msgstr ""

#: standalone/drakvpn:1089
#, fuzzy, c-format
msgid "Verify cert"
msgstr "ดีมาก"

#: standalone/drakvpn:1091
#, c-format
msgid ""
"If you do not want to verify the peer's certificate for\n"
"some reason, set this to off.  The default is on."
msgstr ""

#: standalone/drakvpn:1093
#, c-format
msgid "My identifier"
msgstr ""

#: standalone/drakvpn:1094
#, c-format
msgid ""
"specifies the identifier sent to the remote host and the\n"
"type to use in the phase 1 negotiation.  address, fqdn,\n"
"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
"they are used like:\n"
"\tmy_identifier address [address];\n"
"\t\tthe type is the IP address.  This is the default\n"
"\t\ttype if you do not specify an identifier to use.\n"
"\tmy_identifier user_fqdn string;\n"
"\t\tthe type is a USER_FQDN (user fully-qualified\n"
"\t\tdomain name).\n"
"\tmy_identifier fqdn string;\n"
"\t\tthe type is a FQDN (fully-qualified domain name).\n"
"\tmy_identifier keyid file;\n"
"\t\tthe type is a KEY_ID.\n"
"\tmy_identifier asn1dn [string];\n"
"\t\tthe type is an ASN.1 distinguished name.  If\n"
"\t\tstring is omitted, racoon(8) will get DN from\n"
"\t\tSubject field in the certificate.\n"
"\n"
"Examples : \n"
"\n"
"my_identifier user_fqdn \"myemail@mydomain.com\""
msgstr ""

#: standalone/drakvpn:1114
#, fuzzy, c-format
msgid "Peers identifier"
msgstr "เครื่องพิมพ์"

#: standalone/drakvpn:1115
#, fuzzy, c-format
msgid "Proposal"
msgstr "Protocol"

#: standalone/drakvpn:1117
#, c-format
msgid ""
"specify the encryption algorithm used for the\n"
"phase 1 negotiation. This directive must be defined. \n"
"algorithm is one of following: \n"
"\n"
"des, 3des, blowfish, cast128 for oakley.\n"
"\n"
"For other transforms, this statement should not be used."
msgstr ""

#: standalone/drakvpn:1124
#, c-format
msgid "Hash algorithm"
msgstr ""

#: standalone/drakvpn:1125
#, fuzzy, c-format
msgid "Authentication method"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#: standalone/drakvpn:1126
#, fuzzy, c-format
msgid "DH group"
msgstr "เวิร์กกรุ๊ป (workgroup)"

#: standalone/drakvpn:1133
#, fuzzy, c-format
msgid "Command"
msgstr "ชื่อโดเมน"

#: standalone/drakvpn:1134
#, c-format
msgid "Source IP range"
msgstr ""

#: standalone/drakvpn:1135
#, c-format
msgid "Destination IP range"
msgstr ""

#: standalone/drakvpn:1136
#, fuzzy, c-format
msgid "Upper-layer protocol"
msgstr "Boot Protocol"

#: standalone/drakvpn:1136 standalone/drakvpn:1143
#, fuzzy, c-format
msgid "any"
msgstr "พฤษภาคม"

#: standalone/drakvpn:1138
#, c-format
msgid "Flag"
msgstr ""

#: standalone/drakvpn:1139
#, fuzzy, c-format
msgid "Direction"
msgstr "รายละเอียด"

#: standalone/drakvpn:1140
#, c-format
msgid "IPsec policy"
msgstr ""

#: standalone/drakvpn:1140
#, fuzzy, c-format
msgid "ipsec"
msgstr "Mouse"

#: standalone/drakvpn:1140
#, fuzzy, c-format
msgid "discard"
msgstr "disable"

#: standalone/drakvpn:1143
#, fuzzy, c-format
msgid "Mode"
msgstr "Mouse"

#: standalone/drakvpn:1143
#, fuzzy, c-format
msgid "tunnel"
msgstr "ยกเลิก"

#: standalone/drakvpn:1143
#, fuzzy, c-format
msgid "transport"
msgstr "กำลังตรวจสอบพอร์ต"

#: standalone/drakvpn:1145
#, fuzzy, c-format
msgid "Source/destination"
msgstr "Workstation ที่ทำงาน"

#: standalone/drakvpn:1146
#, c-format
msgid "require"
msgstr ""

#: standalone/drakvpn:1146
#, fuzzy, c-format
msgid "use"
msgstr "Mouse"

#: standalone/drakvpn:1146
#, fuzzy, c-format
msgid "unique"
msgstr "มิถุนายน"

#: standalone/drakxtv:43
#, c-format
msgid "USA (broadcast)"
msgstr ""

#: standalone/drakxtv:43
#, c-format
msgid "USA (cable)"
msgstr ""

#: standalone/drakxtv:43
#, c-format
msgid "USA (cable-hrc)"
msgstr ""

#: standalone/drakxtv:43
#, fuzzy, c-format
msgid "Canada (cable)"
msgstr "คานาดา (ควิเบค)"

#: standalone/drakxtv:44
#, c-format
msgid "Japan (broadcast)"
msgstr ""

#: standalone/drakxtv:44
#, c-format
msgid "Japan (cable)"
msgstr ""

#: standalone/drakxtv:44
#, c-format
msgid "China (broadcast)"
msgstr ""

#: standalone/drakxtv:45
#, fuzzy, c-format
msgid "West Europe"
msgstr "ยุโรป"

#: standalone/drakxtv:45
#, fuzzy, c-format
msgid "East Europe"
msgstr "ยุโรป"

#: standalone/drakxtv:45
#, fuzzy, c-format
msgid "France [SECAM]"
msgstr "ฝรั่งเศษ"

#: standalone/drakxtv:46
#, c-format
msgid "Newzealand"
msgstr ""

#: standalone/drakxtv:49
#, c-format
msgid "Australian Optus cable TV"
msgstr ""

#: standalone/drakxtv:83
#, c-format
msgid ""
"Please,\n"
"type in your tv norm and country"
msgstr ""

#: standalone/drakxtv:85
#, c-format
msgid "TV norm:"
msgstr ""

#: standalone/drakxtv:86
#, c-format
msgid "Area:"
msgstr ""

#: standalone/drakxtv:91
#, c-format
msgid "Scanning for TV channels in progress ..."
msgstr ""

#: standalone/drakxtv:101
#, c-format
msgid "Scanning for TV channels"
msgstr ""

#: standalone/drakxtv:105
#, fuzzy, c-format
msgid "There was an error while scanning for TV channels"
msgstr "มีปัญหาการติดตั้งของแพ็คเก็จ:"

#: standalone/drakxtv:108
#, c-format
msgid "Have a nice day!"
msgstr ""

#: standalone/drakxtv:109
#, c-format
msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr ""

#: standalone/drakxtv:132
#, c-format
msgid "No TV Card detected!"
msgstr ""

#: standalone/drakxtv:133
#, c-format
msgid ""
"No TV Card has been detected on your machine. Please verify that a Linux-"
"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""

#: standalone/harddrake2:18
#, fuzzy, c-format
msgid "Alternative drivers"
msgstr "กำลังพิมพ์กระดาษทดสอบ"

#: standalone/harddrake2:19
#, c-format
msgid "the list of alternative drivers for this sound card"
msgstr ""

#: standalone/harddrake2:22
#, c-format
msgid ""
"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""

#: standalone/harddrake2:23
#, fuzzy, c-format
msgid "Channel"
msgstr "ยกเลิก"

#: standalone/harddrake2:23
#, c-format
msgid "EIDE/SCSI channel"
msgstr ""

#: standalone/harddrake2:24
#, c-format
msgid "Bogomips"
msgstr ""

#: standalone/harddrake2:24
#, c-format
msgid ""
"the GNU/Linux kernel needs to run a calculation loop at boot time to "
"initialize a timer counter.  Its result is stored as bogomips as a way to "
"\"benchmark\" the cpu."
msgstr ""

#: standalone/harddrake2:26
#, fuzzy, c-format
msgid "Bus identification"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#: standalone/harddrake2:27
#, c-format
msgid ""
"- PCI and USB devices: this lists the vendor, device, subvendor and "
"subdevice PCI/USB ids"
msgstr ""

#: standalone/harddrake2:30
#, c-format
msgid ""
"- pci devices: this gives the PCI slot, device and function of this card\n"
"- eide devices: the device is either a slave or a master device\n"
"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""

#: standalone/harddrake2:33
#, fuzzy, c-format
msgid "Cache size"
msgstr "ขนาดของ chunk"

#: standalone/harddrake2:33
#, c-format
msgid "size of the (second level) cpu cache"
msgstr ""

#: standalone/harddrake2:34
#, c-format
msgid "Drive capacity"
msgstr ""

#: standalone/harddrake2:34
#, c-format
msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr ""

#. -PO: here "comas" is the medical coma, not the lexical coma!!
#: standalone/harddrake2:37
#, c-format
msgid "Coma bug"
msgstr ""

#: standalone/harddrake2:37
#, c-format
msgid "whether this cpu has the Cyrix 6x86 Coma bug"
msgstr ""

#: standalone/harddrake2:38
#, c-format
msgid "Cpuid family"
msgstr ""

#: standalone/harddrake2:38
#, c-format
msgid "family of the cpu (eg: 6 for i686 class)"
msgstr ""

#: standalone/harddrake2:39
#, fuzzy, c-format
msgid "Cpuid level"
msgstr "เลือกระดับระบบรักษาความปลอดภัย"

#: standalone/harddrake2:39
#, c-format
msgid "information level that can be obtained through the cpuid instruction"
msgstr ""

#: standalone/harddrake2:40
#, c-format
msgid "Frequency (MHz)"
msgstr ""

#: standalone/harddrake2:40
#, c-format
msgid ""
"the CPU frequency in MHz (Megahertz which in first approximation may be "
"coarsely assimilated to number of instructions the cpu is able to execute "
"per second)"
msgstr ""

#: standalone/harddrake2:41
#, c-format
msgid "this field describes the device"
msgstr ""

#: standalone/harddrake2:42
#, fuzzy, c-format
msgid "Old device file"
msgstr "เลือกไฟล์"

#: standalone/harddrake2:43
#, c-format
msgid "old static device name used in dev package"
msgstr ""

#: standalone/harddrake2:44
#, fuzzy, c-format
msgid "New devfs device"
msgstr "อุปกรณ์เกตเวย์"

#: standalone/harddrake2:45
#, c-format
msgid "new dynamic device name generated by core kernel devfs"
msgstr ""

#. -PO: here "module" is the "jargon term" for a kernel driver
#: standalone/harddrake2:48
#, fuzzy, c-format
msgid "Module"
msgstr "Mouse"

#: standalone/harddrake2:48
#, c-format
msgid "the module of the GNU/Linux kernel that handles the device"
msgstr ""

#: standalone/harddrake2:49
#, fuzzy, c-format
msgid "Extended partitions"
msgstr "สร้างพาร์ติชั่นใหม่"

#: standalone/harddrake2:49
#, fuzzy, c-format
msgid "the number of extended partitions"
msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"

#: standalone/harddrake2:50
#, c-format
msgid "Flags"
msgstr ""

#: standalone/harddrake2:50
#, c-format
msgid "CPU flags reported by the kernel"
msgstr ""

#: standalone/harddrake2:51
#, c-format
msgid "Fdiv bug"
msgstr ""

#: standalone/harddrake2:52
#, c-format
msgid ""
"Early Intel Pentium chips manufactured have a bug in their floating point "
"processor which did not achieve the required precision when performing a "
"Floating point DIVision (FDIV)"
msgstr ""

#: standalone/harddrake2:53
#, c-format
msgid "Is FPU present"
msgstr ""

#: standalone/harddrake2:53
#, c-format
msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""

#: standalone/harddrake2:54
#, c-format
msgid "Whether the FPU has an irq vector"
msgstr ""

#: standalone/harddrake2:54
#, c-format
msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""

#: standalone/harddrake2:55
#, c-format
msgid "F00f bug"
msgstr ""

#: standalone/harddrake2:55
#, c-format
msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr ""

#: standalone/harddrake2:56
#, fuzzy, c-format
msgid "Geometry"
msgstr "เรียกคืนจากไฟล์"

#: standalone/harddrake2:56
#, c-format
msgid "Cylinder/head/sectors geometry of the disk"
msgstr ""

#: standalone/harddrake2:57
#, c-format
msgid "Halt bug"
msgstr ""

#: standalone/harddrake2:58
#, c-format
msgid ""
"Some of the early i486DX-100 chips cannot reliably return to operating mode "
"after the \"halt\" instruction is used"
msgstr ""

#: standalone/harddrake2:60
#, fuzzy, c-format
msgid "Floppy format"
msgstr "ฟอร์แมต"

#: standalone/harddrake2:60
#, c-format
msgid "format of floppies supported by the drive"
msgstr ""

#: standalone/harddrake2:61
#, c-format
msgid "sub generation of the cpu"
msgstr ""

#: standalone/harddrake2:62
#, c-format
msgid "class of hardware device"
msgstr ""

#: standalone/harddrake2:63 standalone/harddrake2:64
#: standalone/printerdrake:212
#, fuzzy, c-format
msgid "Model"
msgstr "Mouse"

#: standalone/harddrake2:63
#, fuzzy, c-format
msgid "hard disk model"
msgstr "Card mem (DMA)"

#: standalone/harddrake2:64
#, c-format
msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
msgstr ""

#: standalone/harddrake2:65
#, fuzzy, c-format
msgid "Model name"
msgstr "ชี่อ module"

#: standalone/harddrake2:65
#, c-format
msgid "official vendor name of the cpu"
msgstr ""

#: standalone/harddrake2:66
#, fuzzy, c-format
msgid "Number of buttons"
msgstr "2 buttons"

#: standalone/harddrake2:66
#, fuzzy, c-format
msgid "the number of buttons the mouse has"
msgstr "2 buttons"

#: standalone/harddrake2:67
#, c-format
msgid "the name of the CPU"
msgstr ""

#: standalone/harddrake2:68
#, fuzzy, c-format
msgid "network printer port"
msgstr "เครื่องพิมพ์ในระบบ Network (TCP/Socket)"

#: standalone/harddrake2:69
#, c-format
msgid "Processor ID"
msgstr ""

#: standalone/harddrake2:69
#, c-format
msgid "the number of the processor"
msgstr ""

#: standalone/harddrake2:70
#, fuzzy, c-format
msgid "Primary partitions"
msgstr "ฟอร์แมตพาร์ติชั่น"

#: standalone/harddrake2:70
#, fuzzy, c-format
msgid "the number of the primary partitions"
msgstr "เซ็กเตอร์แรกของบูตพาร์ติชั่น"

#: standalone/harddrake2:71
#, fuzzy, c-format
msgid "Model stepping"
msgstr "ฟอร์แมต"

#: standalone/harddrake2:71
#, c-format
msgid "stepping of the cpu (sub model (generation) number)"
msgstr ""

#: standalone/harddrake2:72
#, fuzzy, c-format
msgid "the type of bus on which the mouse is connected"
msgstr "เม้าส์ของคุณต่อเข้ากับพอร์ตอนุกรมใด"

#: standalone/harddrake2:73
#, c-format
msgid "the vendor name of the device"
msgstr ""

#: standalone/harddrake2:74
#, c-format
msgid "the vendor name of the processor"
msgstr ""

#: standalone/harddrake2:75
#, fuzzy, c-format
msgid "Write protection"
msgstr "ใช้ auto detection"

#: standalone/harddrake2:75
#, c-format
msgid ""
"the WP flag in the CR0 register of the cpu enforce write proctection at the "
"memory page level, thus enabling the processor to prevent unchecked kernel "
"accesses to user memory (aka this is a bug guard)"
msgstr ""

#. -PO: please keep all "/" charaters !!!
#: standalone/harddrake2:90 standalone/logdrake:78 standalone/printerdrake:146
#: standalone/printerdrake:159
#, c-format
msgid "/_Options"
msgstr "/_Options"

#: standalone/harddrake2:91 standalone/harddrake2:112 standalone/logdrake:80
#: standalone/printerdrake:171 standalone/printerdrake:172
#: standalone/printerdrake:173 standalone/printerdrake:174
#, c-format
msgid "/_Help"
msgstr "/_ช่วยเหลือ"

#: standalone/harddrake2:95
#, fuzzy, c-format
msgid "/Autodetect _printers"
msgstr "ใช้ auto detection"

#: standalone/harddrake2:96
#, fuzzy, c-format
msgid "/Autodetect _modems"
msgstr "ใช้ auto detection"

#: standalone/harddrake2:97
#, fuzzy, c-format
msgid "/Autodetect _jaz drives"
msgstr "ใช้ auto detection"

#: standalone/harddrake2:104 standalone/printerdrake:152
#, fuzzy, c-format
msgid "/_Quit"
msgstr "ออก"

#: standalone/harddrake2:113
#, fuzzy, c-format
msgid "/_Fields description"
msgstr "รายละเอียด"

#: standalone/harddrake2:115
#, c-format
msgid "Harddrake help"
msgstr ""

#: standalone/harddrake2:116
#, c-format
msgid ""
"Description of the fields:\n"
"\n"
msgstr ""

#: standalone/harddrake2:121
#, c-format
msgid ""
"Once you've selected a device, you'll be able to see the device information "
"in fields displayed on the right frame (\"Information\")"
msgstr ""

#: standalone/harddrake2:126 standalone/printerdrake:173
#, c-format
msgid "/_Report Bug"
msgstr "/_แจ้ง Bug"

#: standalone/harddrake2:127 standalone/printerdrake:174
#, fuzzy, c-format
msgid "/_About..."
msgstr "/ช่วยเหลือ/_เกี่ยวกับ..."

#: standalone/harddrake2:128
#, c-format
msgid "About Harddrake"
msgstr ""

#. -PO: Do not alter the <span ..> and </span> tags
#: standalone/harddrake2:130
#, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
"<span foreground=\"royalblue3\">Version:</span> %s\n"
"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
"tvignaud@mandrakesoft.com&gt;\n"
"\n"
msgstr ""

#: standalone/harddrake2:147
#, fuzzy, c-format
msgid "Harddrake2 version %s"
msgstr "การตรวจหาฮาร์ดไดรว์"

#: standalone/harddrake2:163
#, fuzzy, c-format
msgid "Detected hardware"
msgstr "อ่านต่อข้อมูลของฮาร์ดแวร์"

#: standalone/harddrake2:168
#, fuzzy, c-format
msgid "Configure module"
msgstr "คอนฟิกเม้าส์"

#: standalone/harddrake2:175
#, c-format
msgid "Run config tool"
msgstr ""

#: standalone/harddrake2:222
#, c-format
msgid "unknown"
msgstr ""

#: standalone/harddrake2:223
#, fuzzy, c-format
msgid "Unknown"
msgstr "Generic"

#: standalone/harddrake2:241
#, c-format
msgid ""
"Click on a device in the left tree in order to display its information here."
msgstr ""

#: standalone/harddrake2:295
#, fuzzy, c-format
msgid "secondary"
msgstr "%d วินาที"

#: standalone/harddrake2:295
#, c-format
msgid "primary"
msgstr ""

#: standalone/harddrake2:303
#, fuzzy, c-format
msgid "burner"
msgstr "เครื่องพิมพ์"

#: standalone/harddrake2:303
#, c-format
msgid "DVD"
msgstr "ดีวีดี"

#: standalone/keyboarddrake:24
#, c-format
msgid "Please, choose your keyboard layout."
msgstr "คุณต้องการเลือกคีย์บอร์ดเลย์เอ้าท์แบบใด "

#: standalone/keyboarddrake:33
#, c-format
msgid "Do you want the BackSpace to return Delete in console?"
msgstr ""

#: standalone/localedrake:60
#, c-format
msgid "The change is done, but to be effective you must logout"
msgstr ""

#: standalone/logdrake:51
#, fuzzy, c-format
msgid "Mandrake Tools Logs"
msgstr "Control Center"

#: standalone/logdrake:52
#, fuzzy, c-format
msgid "Logdrake"
msgstr "logdrake"

#: standalone/logdrake:65
#, c-format
msgid "Show only for the selected day"
msgstr ""

#: standalone/logdrake:72
#, c-format
msgid "/File/_New"
msgstr "/ไฟล์/_ใหม่"

#: standalone/logdrake:72
#, c-format
msgid "<control>N"
msgstr "<control>N"

#: standalone/logdrake:73
#, c-format
msgid "/File/_Open"
msgstr "/ไฟล์/_เปิด"

#: standalone/logdrake:73
#, c-format
msgid "<control>O"
msgstr "<control>O"

#: standalone/logdrake:74
#, c-format
msgid "/File/_Save"
msgstr "/ไฟล์/_บันทึก"

#: standalone/logdrake:74
#, c-format
msgid "<control>S"
msgstr "<control>S"

#: standalone/logdrake:75
#, c-format
msgid "/File/Save _As"
msgstr "/ไฟล์/บันทึก_เป็น"

#: standalone/logdrake:76
#, c-format
msgid "/File/-"
msgstr "/ไฟล์/-"

#: standalone/logdrake:79
#, c-format
msgid "/Options/Test"
msgstr "/Options/ทดลอง"

#: standalone/logdrake:81
#, c-format
msgid "/Help/_About..."
msgstr "/ช่วยเหลือ/_เกี่ยวกับ..."

#: standalone/logdrake:110
#, c-format
msgid ""
"_:this is the auth.log log file\n"
"Authentication"
msgstr ""

#: standalone/logdrake:111
#, c-format
msgid ""
"_:this is the user.log log file\n"
"User"
msgstr ""

#: standalone/logdrake:112
#, c-format
msgid ""
"_:this is the /var/log/messages log file\n"
"Messages"
msgstr ""

#: standalone/logdrake:113
#, c-format
msgid ""
"_:this is the /var/log/syslog log file\n"
"Syslog"
msgstr ""

#: standalone/logdrake:117
#, c-format
msgid "search"
msgstr "ค้นหา"

#: standalone/logdrake:129
#, c-format
msgid "A tool to monitor your logs"
msgstr "อุปกรณ์ตรวจสอบ logs"

#: standalone/logdrake:130 standalone/net_monitor:86
#, c-format
msgid "Settings"
msgstr "ค่าติดตั้ง"

#: standalone/logdrake:135
#, fuzzy, c-format
msgid "Matching"
msgstr "matching"

#: standalone/logdrake:136
#, c-format
msgid "but not matching"
msgstr "but not matching"

#: standalone/logdrake:140
#, c-format
msgid "Choose file"
msgstr "เลือก file"

#: standalone/logdrake:149
#, c-format
msgid "Calendar"
msgstr "ปฎิทิน"

#: standalone/logdrake:159
#, c-format
msgid "Content of the file"
msgstr "ข้อความของ file"

#: standalone/logdrake:163 standalone/logdrake:429
#, c-format
msgid "Mail alert"
msgstr ""

#: standalone/logdrake:170
#, c-format
msgid "The alert wizard had unexpectly failled:"
msgstr ""

#: standalone/logdrake:221
#, c-format
msgid "please wait, parsing file: %s"
msgstr "โปรดกรุณารอ,parsing file:%s"

#: standalone/logdrake:406
#, c-format
msgid "Apache World Wide Web Server"
msgstr ""

#: standalone/logdrake:407
#, fuzzy, c-format
msgid "Domain Name Resolver"
msgstr "ชื่อโดเมน"

#: standalone/logdrake:408
#, fuzzy, c-format
msgid "Ftp Server"
msgstr "เซิร์ฟเวอร์ NIS"

#: standalone/logdrake:409
#, fuzzy, c-format
msgid "Postfix Mail Server"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: standalone/logdrake:410
#, fuzzy, c-format
msgid "Samba Server"
msgstr "เซิร์ฟเวอร์ NIS"

#: standalone/logdrake:411
#, fuzzy, c-format
msgid "SSH Server"
msgstr "เซิร์ฟเวอร์ NIS"

#: standalone/logdrake:412
#, fuzzy, c-format
msgid "Webmin Service"
msgstr "อุปกรณ์"

#: standalone/logdrake:413
#, fuzzy, c-format
msgid "Xinetd Service"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: standalone/logdrake:424
#, fuzzy, c-format
msgid "Configure the mail alert system"
msgstr "คอนฟิกระบบเน็ตเวิร์ก"

#: standalone/logdrake:425
#, c-format
msgid "Stop the mail alert system"
msgstr ""

#: standalone/logdrake:432
#, fuzzy, c-format
msgid "Mail alert configuration"
msgstr "การปรับแต่ง LAN"

#: standalone/logdrake:433
#, c-format
msgid ""
"Welcome to the mail configuration utility.\n"
"\n"
"Here, you'll be able to set up the alert system.\n"
msgstr ""

#: standalone/logdrake:436
#, fuzzy, c-format
msgid "What do you want to do?"
msgstr "คุณต้องการเม้าท์อุปกรณ์ %s ไว้ที่ใด?"

#: standalone/logdrake:443
#, fuzzy, c-format
msgid "Services settings"
msgstr "อุปกรณ์"

#: standalone/logdrake:444
#, c-format
msgid ""
"You will receive an alert if one of the selected services is no longer "
"running"
msgstr ""

#: standalone/logdrake:451
#, fuzzy, c-format
msgid "Load setting"
msgstr "ฟอร์แมต"

#: standalone/logdrake:452
#, c-format
msgid "You will receive an alert if the load is higher than this value"
msgstr ""

#: standalone/logdrake:453
#, c-format
msgid ""
"_: load here is a noun, the load of the system\n"
"Load"
msgstr ""

#: standalone/logdrake:458
#, fuzzy, c-format
msgid "Alert configuration"
msgstr "การคอนฟิก"

#: standalone/logdrake:459
#, fuzzy, c-format
msgid "Please enter your email address below "
msgstr "โปรดลองอีกครั้ง"

#: standalone/logdrake:460
#, c-format
msgid "and enter the name (or the IP) of the SMTP server you whish to use"
msgstr ""

#: standalone/logdrake:479
#, c-format
msgid "The wizard successfully configured the mail alert."
msgstr ""

#: standalone/logdrake:485
#, c-format
msgid "The wizard successfully disabled the mail alert."
msgstr ""

#: standalone/logdrake:544
#, c-format
msgid "Save as.."
msgstr "บันทึกแฟ้มเป็น"

#: standalone/mousedrake:31
#, c-format
msgid "Please choose your mouse type."
msgstr "คุณมีเม้าส์ชนิดใด"

#: standalone/mousedrake:44
#, c-format
msgid "Emulate third button?"
msgstr "ต้องการจำลองเม้าส์ปุ่มที่สามด้วยหรือไม่?"

#: standalone/mousedrake:61
#, fuzzy, c-format
msgid "Mouse test"
msgstr "Mouse Systems"

#: standalone/mousedrake:64
#, fuzzy, c-format
msgid "Please test your mouse:"
msgstr "กรุณาทดสอบเม้าส์"

#: standalone/net_monitor:52 standalone/net_monitor:57
#, fuzzy, c-format
msgid "Network Monitoring"
msgstr "การคอนฟิกระบบเน็ตเวิร์ก"

#: standalone/net_monitor:92
#, c-format
msgid "Global statistics"
msgstr ""

#: standalone/net_monitor:95
#, c-format
msgid "Instantaneous"
msgstr ""

#: standalone/net_monitor:95
#, c-format
msgid "Average"
msgstr ""

#: standalone/net_monitor:96
#, fuzzy, c-format
msgid ""
"Sending\n"
"speed:"
msgstr "บันทึกลงไฟล์"

#: standalone/net_monitor:97
#, fuzzy, c-format
msgid ""
"Receiving\n"
"speed:"
msgstr "บันทึกลงไฟล์"

#: standalone/net_monitor:100
#, fuzzy, c-format
msgid ""
"Connection\n"
"time: "
msgstr "ชนิดการเชื่อมต่อ"

#: standalone/net_monitor:122
#, fuzzy, c-format
msgid "Wait please, testing your connection..."
msgstr "ทดสอบ connection..."

#: standalone/net_monitor:150 standalone/net_monitor:163
#, fuzzy, c-format
msgid "Disconnecting from Internet "
msgstr "ต่อเข้า Internet "

#: standalone/net_monitor:150 standalone/net_monitor:163
#, fuzzy, c-format
msgid "Connecting to Internet "
msgstr "ต่อเข้า Internet "

#: standalone/net_monitor:194
#, fuzzy, c-format
msgid "Disconnection from Internet failed."
msgstr "ต่อเข้า Internet "

#: standalone/net_monitor:195
#, fuzzy, c-format
msgid "Disconnection from Internet complete."
msgstr "ต่อเข้า Internet "

#: standalone/net_monitor:197
#, fuzzy, c-format
msgid "Connection complete."
msgstr "ชนิดการเชื่อมต่อ"

#: standalone/net_monitor:198
#, c-format
msgid ""
"Connection failed.\n"
"Verify your configuration in the Mandrake Control Center."
msgstr ""

#: standalone/net_monitor:299
#, fuzzy, c-format
msgid "Color configuration"
msgstr "การคอนฟิก"

#: standalone/net_monitor:347 standalone/net_monitor:367
#, c-format
msgid "sent: "
msgstr ""

#: standalone/net_monitor:354 standalone/net_monitor:371
#, c-format
msgid "received: "
msgstr ""

#: standalone/net_monitor:361
#, c-format
msgid "average"
msgstr ""

#: standalone/net_monitor:364
#, fuzzy, c-format
msgid "Local measure"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/net_monitor:396
#, c-format
msgid "transmitted"
msgstr ""

#: standalone/net_monitor:397
#, c-format
msgid "received"
msgstr ""

#: standalone/net_monitor:415
#, c-format
msgid ""
"Warning, another internet connection has been detected, maybe using your "
"network"
msgstr ""

#: standalone/net_monitor:421
#, fuzzy, c-format
msgid "Disconnect %s"
msgstr "ยกเลิกติดต่อ..."

#: standalone/net_monitor:421
#, fuzzy, c-format
msgid "Connect %s"
msgstr "เชื่อมต่ออยู่"

#: standalone/net_monitor:426
#, fuzzy, c-format
msgid "No internet connection configured"
msgstr "การปรับแต่งการติดต่อเข้า internet"

#: standalone/printerdrake:70
#, fuzzy, c-format
msgid "Loading printer configuration... Please wait"
msgstr "การคอนฟิก Internet"

#: standalone/printerdrake:86
#, fuzzy, c-format
msgid "Reading data of installed printers..."
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/printerdrake:129
#, fuzzy, c-format
msgid "%s Printer Management Tool"
msgstr "ไม่มีเครื่องพิมพ์"

#: standalone/printerdrake:143 standalone/printerdrake:144
#: standalone/printerdrake:145 standalone/printerdrake:153
#: standalone/printerdrake:154 standalone/printerdrake:158
#, fuzzy, c-format
msgid "/_Actions"
msgstr "/_Options"

#: standalone/printerdrake:143
#, fuzzy, c-format
msgid "/Set as _Default"
msgstr " (Default)"

#: standalone/printerdrake:144
#, fuzzy, c-format
msgid "/_Edit"
msgstr "Ext2"

#: standalone/printerdrake:145
#, fuzzy, c-format
msgid "/_Delete"
msgstr "ลบ"

#: standalone/printerdrake:146
#, fuzzy, c-format
msgid "/_Expert mode"
msgstr "โหมดผู้เชี่ยวชาญ"

#: standalone/printerdrake:151
#, c-format
msgid "/_Refresh"
msgstr ""

#: standalone/printerdrake:154
#, fuzzy, c-format
msgid "/_Add Printer"
msgstr "เครื่องพิมพ์"

#: standalone/printerdrake:158
#, fuzzy, c-format
msgid "/_Configure CUPS"
msgstr "คอนฟิกระบบ X"

#: standalone/printerdrake:191
#, fuzzy, c-format
msgid "Search:"
msgstr "ค้นหา"

#: standalone/printerdrake:194
#, c-format
msgid "Apply filter"
msgstr ""

#: standalone/printerdrake:212 standalone/printerdrake:219
#, c-format
msgid "Def."
msgstr ""

#: standalone/printerdrake:212 standalone/printerdrake:219
#, fuzzy, c-format
msgid "Printer Name"
msgstr "ชื่อพรินต์คิว"

#: standalone/printerdrake:212
#, fuzzy, c-format
msgid "Connection Type"
msgstr "ชนิดการเชื่อมต่อ"

#: standalone/printerdrake:219
#, fuzzy, c-format
msgid "Server Name"
msgstr "เซิร์ฟเวอร์"

#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:227
#, fuzzy, c-format
msgid "Add Printer"
msgstr "เครื่องพิมพ์"

#: standalone/printerdrake:227
#, fuzzy, c-format
msgid "Add a new printer to the system"
msgstr "ไม่มีเครื่องพิมพ์"

#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:230
#, fuzzy, c-format
msgid "Set as default"
msgstr "default"

#: standalone/printerdrake:230
#, fuzzy, c-format
msgid "Set selected printer as the default printer"
msgstr "คุณต้องการพิมพ์ทดสอบหรือไม่?"

#: standalone/printerdrake:233
#, fuzzy, c-format
msgid "Edit selected printer"
msgstr "ค้นพบ %s"

#: standalone/printerdrake:236
#, fuzzy, c-format
msgid "Delete selected printer"
msgstr "ลบคิว"

#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:239
#, fuzzy, c-format
msgid "Refresh"
msgstr "ไม่ยอมรับ"

#: standalone/printerdrake:239
#, fuzzy, c-format
msgid "Refresh the list"
msgstr "ฟอร์แมต loopback file %s"

#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:242
#, fuzzy, c-format
msgid "Configure CUPS"
msgstr "คอนฟิกระบบ X"

#: standalone/printerdrake:242
#, fuzzy, c-format
msgid "Configure CUPS printing system"
msgstr "คอนฟิกระบบเน็ตเวิร์ก"

#: standalone/printerdrake:528
#, c-format
msgid "Authors: "
msgstr "ผู้แต่ง:  "

#: standalone/printerdrake:534
#, fuzzy, c-format
msgid "Printer Management \n"
msgstr "ไม่มีเครื่องพิมพ์"

#: standalone/scannerdrake:50
#, fuzzy, c-format
msgid ""
"SANE packages need to be installed to use scanners.\n"
"\n"
"Do you want to install the SANE packages?"
msgstr ""
"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
"คุณแน่ใจว่าจะไม่เลือกมันหรือ"

#: standalone/scannerdrake:54
#, fuzzy, c-format
msgid "Aborting Scannerdrake."
msgstr "เลือกกราฟฟิคการ์ด"

#: standalone/scannerdrake:59
#, c-format
msgid ""
"Could not install the packages needed to set up a scanner with Scannerdrake."
msgstr ""

#: standalone/scannerdrake:60
#, c-format
msgid "Scannerdrake will not be started now."
msgstr ""

#: standalone/scannerdrake:66 standalone/scannerdrake:464
#, fuzzy, c-format
msgid "Searching for configured scanners ..."
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/scannerdrake:70 standalone/scannerdrake:468
#, fuzzy, c-format
msgid "Searching for new scanners ..."
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/scannerdrake:78 standalone/scannerdrake:490
#, c-format
msgid "Re-generating list of configured scanners ..."
msgstr ""

#: standalone/scannerdrake:100 standalone/scannerdrake:141
#: standalone/scannerdrake:155
#, c-format
msgid "The %s is not supported by this version of %s."
msgstr ""

#: standalone/scannerdrake:103
#, fuzzy, c-format
msgid "%s found on %s, configure it automatically?"
msgstr "คุณต้องการคอนฟิกเครื่องพิมพ์ด้วยหรือไม่"

#: standalone/scannerdrake:115
#, c-format
msgid "%s is not in the scanner database, configure it manually?"
msgstr ""

#: standalone/scannerdrake:130
#, fuzzy, c-format
msgid "Select a scanner model"
msgstr "เลือกกราฟฟิคการ์ด"

#: standalone/scannerdrake:131
#, c-format
msgid " ("
msgstr ""

#: standalone/scannerdrake:132
#, fuzzy, c-format
msgid "Detected model: %s"
msgstr "ค้นพบ %s"

#: standalone/scannerdrake:134
#, c-format
msgid ", "
msgstr ""

#: standalone/scannerdrake:135
#, fuzzy, c-format
msgid "Port: %s"
msgstr "Port"

#: standalone/scannerdrake:161
#, c-format
msgid "The %s is not known by this version of Scannerdrake."
msgstr ""

#: standalone/scannerdrake:169 standalone/scannerdrake:183
#, c-format
msgid "Do not install firmware file"
msgstr ""

#: standalone/scannerdrake:173 standalone/scannerdrake:225
#, c-format
msgid ""
"It is possible that your %s needs its firmware to be uploaded everytime when "
"it is turned on."
msgstr ""

#: standalone/scannerdrake:174 standalone/scannerdrake:226
#, c-format
msgid "If this is the case, you can make this be done automatically."
msgstr ""

#: standalone/scannerdrake:175 standalone/scannerdrake:229
#, c-format
msgid ""
"To do so, you need to supply the firmware file for your scanner so that it "
"can be installed."
msgstr ""

#: standalone/scannerdrake:176 standalone/scannerdrake:230
#, c-format
msgid ""
"You find the file on the CD or floppy coming with the scanner, on the "
"manufacturer's home page, or on your Windows partition."
msgstr ""

#: standalone/scannerdrake:178 standalone/scannerdrake:237
#, c-format
msgid "Install firmware file from"
msgstr ""

#: standalone/scannerdrake:198
#, fuzzy, c-format
msgid "Select firmware file"
msgstr "เลือกไฟล์"

#: standalone/scannerdrake:201 standalone/scannerdrake:260
#, c-format
msgid "The firmware file %s does not exist or is unreadable!"
msgstr ""

#: standalone/scannerdrake:224
#, c-format
msgid ""
"It is possible that your scanners need their firmware to be uploaded "
"everytime when they are turned on."
msgstr ""

#: standalone/scannerdrake:228
#, c-format
msgid ""
"To do so, you need to supply the firmware files for your scanners so that it "
"can be installed."
msgstr ""

#: standalone/scannerdrake:231
#, c-format
msgid ""
"If you have already installed your scanner's firmware you can update the "
"firmware here by supplying the new firmware file."
msgstr ""

#: standalone/scannerdrake:233
#, c-format
msgid "Install firmware for the"
msgstr ""

#: standalone/scannerdrake:256
#, fuzzy, c-format
msgid "Select firmware file for the %s"
msgstr "เลือกไฟล์"

#: standalone/scannerdrake:274
#, fuzzy, c-format
msgid "Could not install the firmware file for the %s!"
msgstr "เลือกไฟล์"

#: standalone/scannerdrake:287
#, c-format
msgid "The firmware file for your %s was successfully installed."
msgstr ""

#: standalone/scannerdrake:297
#, c-format
msgid "The %s is unsupported"
msgstr ""

#: standalone/scannerdrake:302
#, c-format
msgid ""
"The %s must be configured by printerdrake.\n"
"You can launch printerdrake from the %s Control Center in Hardware section."
msgstr ""

#: standalone/scannerdrake:306 standalone/scannerdrake:313
#: standalone/scannerdrake:343
#, fuzzy, c-format
msgid "Auto-detect available ports"
msgstr "ใช้ auto detection"

#: standalone/scannerdrake:308 standalone/scannerdrake:354
#, c-format
msgid "Please select the device where your %s is attached"
msgstr ""

#: standalone/scannerdrake:309
#, c-format
msgid "(Note: Parallel ports cannot be auto-detected)"
msgstr ""

#: standalone/scannerdrake:311 standalone/scannerdrake:356
#, fuzzy, c-format
msgid "choose device"
msgstr "อุปกรณ์บูต"

#: standalone/scannerdrake:345
#, fuzzy, c-format
msgid "Searching for scanners ..."
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/scannerdrake:380
#, c-format
msgid ""
"Your %s has been configured.\n"
"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
"Graphics in the applications menu."
msgstr ""

#: standalone/scannerdrake:404
#, fuzzy, c-format
msgid ""
"The following scanners\n"
"\n"
"%s\n"
"are available on your system.\n"
msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"

#: standalone/scannerdrake:405
#, fuzzy, c-format
msgid ""
"The following scanner\n"
"\n"
"%s\n"
"is available on your system.\n"
msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"

#: standalone/scannerdrake:408 standalone/scannerdrake:411
#, c-format
msgid "There are no scanners found which are available on your system.\n"
msgstr ""

#: standalone/scannerdrake:425
#, fuzzy, c-format
msgid "Search for new scanners"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/scannerdrake:431
#, c-format
msgid "Add a scanner manually"
msgstr ""

#: standalone/scannerdrake:438
#, fuzzy, c-format
msgid "Install/Update firmware files"
msgstr "เลือกไฟล์"

#: standalone/scannerdrake:444
#, fuzzy, c-format
msgid "Scanner sharing"
msgstr "เครื่องพิมพ์"

#: standalone/scannerdrake:503 standalone/scannerdrake:668
#, fuzzy, c-format
msgid "All remote machines"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: standalone/scannerdrake:515 standalone/scannerdrake:818
#, fuzzy, c-format
msgid "This machine"
msgstr "matching"

#: standalone/scannerdrake:555
#, c-format
msgid ""
"Here you can choose whether the scanners connected to this machine should be "
"accessible by remote machines and by which remote machines."
msgstr ""

#: standalone/scannerdrake:556
#, c-format
msgid ""
"You can also decide here whether scanners on remote machines should be made "
"available on this machine."
msgstr ""

#: standalone/scannerdrake:559
#, c-format
msgid "The scanners on this machine are available to other computers"
msgstr ""

#: standalone/scannerdrake:561
#, fuzzy, c-format
msgid "Scanner sharing to hosts: "
msgstr "เครื่องพิมพ์"

#: standalone/scannerdrake:575
#, c-format
msgid "Use scanners on remote computers"
msgstr ""

#: standalone/scannerdrake:578
#, c-format
msgid "Use the scanners on hosts: "
msgstr ""

#: standalone/scannerdrake:605 standalone/scannerdrake:677
#: standalone/scannerdrake:827
#, fuzzy, c-format
msgid "Sharing of local scanners"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/scannerdrake:606
#, c-format
msgid ""
"These are the machines on which the locally connected scanner(s) should be "
"available:"
msgstr ""

#: standalone/scannerdrake:617 standalone/scannerdrake:767
#, fuzzy, c-format
msgid "Add host"
msgstr "เพิ่มผู้ใช้"

#: standalone/scannerdrake:623 standalone/scannerdrake:773
#, fuzzy, c-format
msgid "Edit selected host"
msgstr "ค้นพบ %s"

#: standalone/scannerdrake:632 standalone/scannerdrake:782
#, fuzzy, c-format
msgid "Remove selected host"
msgstr "ลบคิว"

#: standalone/scannerdrake:656 standalone/scannerdrake:664
#: standalone/scannerdrake:669 standalone/scannerdrake:715
#: standalone/scannerdrake:806 standalone/scannerdrake:814
#: standalone/scannerdrake:819 standalone/scannerdrake:865
#, c-format
msgid "Name/IP address of host:"
msgstr ""

#: standalone/scannerdrake:678 standalone/scannerdrake:828
#, c-format
msgid "Choose the host on which the local scanners should be made available:"
msgstr ""

#: standalone/scannerdrake:689 standalone/scannerdrake:839
#, fuzzy, c-format
msgid "You must enter a host name or an IP address.\n"
msgstr "กรุณาทดสอบเม้าส์"

#: standalone/scannerdrake:700 standalone/scannerdrake:850
#, c-format
msgid "This host is already in the list, it cannot be added again.\n"
msgstr ""

#: standalone/scannerdrake:755
#, fuzzy, c-format
msgid "Usage of remote scanners"
msgstr "ใช้พื้นที่ที่ว่าง"

#: standalone/scannerdrake:756
#, c-format
msgid "These are the machines from which the scanners should be used:"
msgstr ""

#: standalone/scannerdrake:913
#, fuzzy, c-format
msgid ""
"saned needs to be installed to share the local scanner(s).\n"
"\n"
"Do you want to install the saned package?"
msgstr ""
"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
"คุณแน่ใจว่าจะไม่เลือกมันหรือ"

#: standalone/scannerdrake:917 standalone/scannerdrake:921
#, c-format
msgid "Your scanner(s) will not be available on the network."
msgstr ""

#: standalone/service_harddrake:62
#, c-format
msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr ""

#: standalone/service_harddrake:63
#, c-format
msgid "- %s was removed\n"
msgstr ""

#: standalone/service_harddrake:66
#, fuzzy, c-format
msgid "Some devices were added: %s\n"
msgstr "ดีไวซ์ของเม้าส์: %s\n"

#: standalone/service_harddrake:67
#, c-format
msgid "- %s was added\n"
msgstr ""

#: standalone/service_harddrake:126
#, fuzzy, c-format
msgid "Hardware probing in progress"
msgstr "ค้นหาเจอบน port %s"

#: standalone/service_harddrake_confirm:7
#, c-format
msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
msgstr ""

#: standalone/service_harddrake_confirm:8
#, fuzzy, c-format
msgid "Do you want to run the appropriate config tool ?"
msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"

#: steps.pm:14
#, c-format
msgid "Language"
msgstr "เลือกภาษาที่คุณใช้"

#: steps.pm:15
#, c-format
msgid "License"
msgstr ""

#: steps.pm:16
#, c-format
msgid "Configure mouse"
msgstr "คอนฟิกเม้าส์"

#: steps.pm:17
#, c-format
msgid "Hard drive detection"
msgstr "การตรวจหาฮาร์ดไดรว์"

#: steps.pm:18
#, c-format
msgid "Select installation class"
msgstr "เลือกชุดการติดตั้ง"

#: steps.pm:19
#, c-format
msgid "Choose your keyboard"
msgstr "เลือกคีย์บอร์ด"

#: steps.pm:21
#, fuzzy, c-format
msgid "Partitioning"
msgstr "เครื่องพิมพ์"

#: steps.pm:22
#, c-format
msgid "Format partitions"
msgstr "ฟอร์แมตพาร์ติชั่น"

#: steps.pm:23
#, c-format
msgid "Choose packages to install"
msgstr "เลือกแพ็คเก็จ"

#: steps.pm:24
#, c-format
msgid "Install system"
msgstr "ติดตั้งระบบ"

#: steps.pm:25
#, fuzzy, c-format
msgid "Root password"
msgstr "ไม่มีรหัสผ่าน"

#: steps.pm:26
#, c-format
msgid "Add a user"
msgstr "เพิ่มผู้ใช้"

#: steps.pm:27
#, c-format
msgid "Configure networking"
msgstr "คอนฟิกระบบเน็ตเวิร์ก"

#: steps.pm:28
#, c-format
msgid "Install bootloader"
msgstr "ติดตั้งบูตโหลดเดอร์"

#: steps.pm:29
#, c-format
msgid "Configure X"
msgstr "คอนฟิกระบบ X"

#: steps.pm:31
#, c-format
msgid "Configure services"
msgstr "ปรับแต่งการบริการต่างๆ"

#: steps.pm:32
#, fuzzy, c-format
msgid "Install updates"
msgstr "ติดตั้งระบบ"

#: steps.pm:33
#, c-format
msgid "Exit install"
msgstr "ออกจากการติดตั้ง"

#: ugtk2.pm:1084
#, c-format
msgid "Is this correct?"
msgstr "ถูกต้องหรือไม่?"

#: ugtk2.pm:1212
#, c-format
msgid "Expand Tree"
msgstr "ขยาย tree"

#: ugtk2.pm:1213
#, c-format
msgid "Collapse Tree"
msgstr "ยุบ tree"

#: ugtk2.pm:1214
#, c-format
msgid "Toggle between flat and group sorted"
msgstr "เปลี่ยนไปมาระหว่างการจัดเรียงแบบ flat หรือ group"

#: wizards.pm:95
#, c-format
msgid ""
"%s is not installed\n"
"Click \"Next\" to install or \"Cancel\" to quit"
msgstr ""

#: wizards.pm:99
#, fuzzy, c-format
msgid "Installation failed"
msgstr "เลือกชุดการติดตั้ง"

#: ../../share/compssUsers:999
msgid "Office Workstation"
msgstr "Workstation ที่ทำงาน"

#: ../../share/compssUsers:999
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "Game station"
msgstr "Workstation ที่ทำงาน"

#: ../../share/compssUsers:999
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "Multimedia station"
msgstr "Multimedia - เขียน CD "

#: ../../share/compssUsers:999
msgid "Sound and video playing/editing programs"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "Internet station"
msgstr "การเชื่อมต่อกับ Internet แบบ sharing"

#: ../../share/compssUsers:999
#, fuzzy
msgid ""
"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
"Web"
msgstr "เครื่องมือในการอ่านและส่ง mail และ news (pine, mutt, tin..) และท่องอินเตอร์เน็ต"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Network Computer (client)"
msgstr "เครื่องพิมพ์ในระบบ Network (Socket)"

#: ../../share/compssUsers:999
msgid "Clients for different protocols including ssh"
msgstr "Clients for different protocols including ssh"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Configuration"
msgstr "การปรับแต่ง LAN"

#: ../../share/compssUsers:999
msgid "Tools to ease the configuration of your computer"
msgstr "เครืองมือที่ช่วยในการปรับแต่งเครื่องชองคุณให้ง่ายขึ้น"

#: ../../share/compssUsers:999
msgid "Console Tools"
msgstr ""

#: ../../share/compssUsers:999
msgid "Editors, shells, file tools, terminals"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "KDE Workstation"
msgstr "Workstation ที่ทำงาน"

#: ../../share/compssUsers:999
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "GNOME Workstation"
msgstr "Workstation ที่ทำงาน"

#: ../../share/compssUsers:999
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr ""

#: ../../share/compssUsers:999
msgid "Other Graphical Desktops"
msgstr "Graphical Desktops อื่นๆ"

#: ../../share/compssUsers:999
msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr ""

#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "Documentation"
msgstr "ตำแหน่ง"

#: ../../share/compssUsers:999
msgid "Books and Howto's on Linux and Free Software"
msgstr ""

#: ../../share/compssUsers:999
msgid "LSB"
msgstr ""

#: ../../share/compssUsers:999
msgid "Linux Standard Base. Third party applications support"
msgstr ""

#: ../../share/compssUsers:999
msgid "Web/FTP"
msgstr ""

#: ../../share/compssUsers:999
msgid "Apache, Pro-ftpd"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "Mail"
msgstr "เลือกภาษาที่คุณใช้"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Postfix mail server"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Database"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: ../../share/compssUsers:999
msgid "PostgreSQL or MySQL database server"
msgstr ""

#: ../../share/compssUsers:999
msgid "Firewall/Router"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "Internet gateway"
msgstr "การติดต่อ internet"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Network Computer server"
msgstr "เครื่องพิมพ์ในระบบ Network (Socket)"

#: ../../share/compssUsers:999
msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "Set of tools to read and send mail and news and to browse the Web"
msgstr "เครื่องมือในการอ่านและส่ง mail และ news (pine, mutt, tin..) และท่องอินเตอร์เน็ต"

#~ msgid "4 billion colors (32 bits)"
#~ msgstr "สี่พันล้านสี (32 บิต)"

#~ msgid "XFree86 server: %s\n"
#~ msgstr "เซิร์ฟเวอร์ XFree86: %s\n"

#~ msgid "Here is the full list of keyboards available"
#~ msgstr "ต่อไปนี้คือ keyboard ที่ใช้ได้"

#~ msgid "Provider dns 1 (optional)"
#~ msgstr "ผู้ให้บริการ dns 1 (optional)"

#~ msgid "Provider dns 2 (optional)"
#~ msgstr "ผู้ให้บริการ dns 2 (optional)"

#~ msgid "What kind is your ISDN connection?"
#~ msgstr "การติดต่อแบบ ISDN ของคุณเป็นแบบใด"

#~ msgid ""
#~ "I have detected an ISDN PCI card, but I don't know its type. Please "
#~ "select a PCI card on the next screen."
#~ msgstr ""
#~ "ผมเจอการ์ด ISDN แบบ PCI แต่ผมไม่ทราบชนิด กรุณาเลือกหนื่งในการ์ด PCI ในหน้าต่อไป"

#~ msgid "No ISDN PCI card found. Please select one on the next screen."
#~ msgstr "ไม่พบการ์ด ISDN PCI  กรุณาเลือกจากหน้าต่อไป"

#~ msgid "Scientific Workstation"
#~ msgstr "Workstation ทางวิทยาศาสตร์"

#~ msgid "Compact"
#~ msgstr "แบบอัด (Compact)"