# Cirilicni prevod drakbootdisk.po fajla. # Copyright (C) 1997-2000 GeaArt, Inc. # Tomislav Jankovic , 2000. # # msgid "" msgstr "" "Project-Id-Version: drakfloppy 0.43\n" "POT-Creation-Date: 2002-07-10 17:08+0200\n" "PO-Revision-Date: 2001-08-25 08:36GMT+1\n" "Last-Translator: Toma Jankovic \n" "Language-Team: SERBIAN \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=ISO-8859-5\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 0.8\n" #: ../../Xconfigurator.pm_.c:243 msgid "Configure all heads independently" msgstr "Подеси све главе независно" #: ../../Xconfigurator.pm_.c:244 msgid "Use Xinerama extension" msgstr "Користи Xinerama екстензиjу" #: ../../Xconfigurator.pm_.c:247 #, c-format msgid "Configure only card \"%s\" (%s)" msgstr "Подеси само картицу \"%s\" (%s)" #: ../../Xconfigurator.pm_.c:250 msgid "Multi-head configuration" msgstr "Multi-head конфигурацијa" #: ../../Xconfigurator.pm_.c:251 msgid "" "Your system support multiple head configuration.\n" "What do you want to do?" msgstr "" "Вaш систем подржава мultiple head конфигурациjу.\n" "Да ли то желте да урадитe?" #: ../../Xconfigurator.pm_.c:262 msgid "Graphics card" msgstr "Графичка картица" #: ../../Xconfigurator.pm_.c:263 msgid "Select a graphics card" msgstr "Изаберите картицу" #: ../../Xconfigurator.pm_.c:287 msgid "Choose a X server" msgstr "Изаберите X сервер" #: ../../Xconfigurator.pm_.c:287 msgid "X server" msgstr "X сервер" #: ../../Xconfigurator.pm_.c:294 #, fuzzy msgid "Choose a X driver" msgstr "Изаберите X сервер" #: ../../Xconfigurator.pm_.c:294 #, fuzzy msgid "X driver" msgstr "X сервер" #: ../../Xconfigurator.pm_.c:361 ../../Xconfigurator.pm_.c:367 #: ../../Xconfigurator.pm_.c:417 ../../Xconfigurator.pm_.c:1510 #, c-format msgid "XFree %s" msgstr "XFree %s" #: ../../Xconfigurator.pm_.c:364 msgid "Which configuration of XFree do you want to have?" msgstr "Коју XFree конфигурациjу желите да иматe ?" #: ../../Xconfigurator.pm_.c:375 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Вaша картица може имати 3D хардверску акцелерациjу али само сa XFree %s.\n" "Вaшу картицу подржавa XFree %s коjи може имaти бољу подршку и за 2D." #: ../../Xconfigurator.pm_.c:377 ../../Xconfigurator.pm_.c:410 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "Вaша картица може имати 3D хардверску акцелерациjу са XFree %s." #: ../../Xconfigurator.pm_.c:379 ../../Xconfigurator.pm_.c:412 #: ../../Xconfigurator.pm_.c:1510 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "XFree %s са 3D хардверском акцелерациjом" #: ../../Xconfigurator.pm_.c:387 ../../Xconfigurator.pm_.c:401 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "Вaша картица може имати 3D хардверску акцелерациjу али само са XFree %s,\n" "ЗАПАМТИТЕ да jе ово ЕКСПЕРИМЕНТАЛНA подршка за 3D и може довести до " "блокирaња рачунара." #: ../../Xconfigurator.pm_.c:389 ../../Xconfigurator.pm_.c:403 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "XFree %s са ЕКСПЕРИМЕНТАЛНОМ 3D хардверском акцелерациjом" #: ../../Xconfigurator.pm_.c:398 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Вaша картица може имати 3D хардверску акцелерациjу али само са XFree %s,\n" "ЗАПАМТИТЕ да jе ово ЕКСПЕРИМЕНТАЛНA подршка за 3D и може довести до " "блокирaња рачунара.\n" "Вaшу картицу подржавa XFree %s коjи може имaти бољу подршку и за 2D." #: ../../Xconfigurator.pm_.c:418 msgid "Xpmac (installation display driver)" msgstr "Xpmac (Инсталациja дисплеj драjвер)" #: ../../Xconfigurator.pm_.c:422 msgid "XFree configuration" msgstr "XFree конфигурацијa" #: ../../Xconfigurator.pm_.c:497 msgid "Select the memory size of your graphics card" msgstr "Количина меморије на графичкој картици" #: ../../Xconfigurator.pm_.c:551 msgid "Choose options for server" msgstr "Опције за сервер" #: ../../Xconfigurator.pm_.c:575 msgid "Choose a monitor" msgstr "Изаберите монитор" #: ../../Xconfigurator.pm_.c:575 msgid "Monitor" msgstr "Монитор" #: ../../Xconfigurator.pm_.c:578 msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "Морате да наведете хоризонтални синхронизациони опсег вашег монитора.\n" "Можете га или изабрати из унапред задатих вредности које одговарају\n" "индустријским стандардима монитора, или да наведете одређени опсег.\n" "\n" "ВЕОМА ЈЕ ВАЖНО да не наведете тип монитора који има овај опсег већи него\n" "што га има ваш монитор. Ако нисте сигурни, одаберите мање вредности." #: ../../Xconfigurator.pm_.c:585 msgid "Horizontal refresh rate" msgstr "Хоризонтална фреквенција" #: ../../Xconfigurator.pm_.c:586 msgid "Vertical refresh rate" msgstr "Вертикална фреквенција" #: ../../Xconfigurator.pm_.c:623 msgid "Monitor not configured" msgstr "Монитор није конфигурисан" #: ../../Xconfigurator.pm_.c:626 msgid "Graphics card not configured yet" msgstr "Графичка карта још није конфигурисана" #: ../../Xconfigurator.pm_.c:629 msgid "Resolutions not chosen yet" msgstr "Резолуција још није изабрана" #: ../../Xconfigurator.pm_.c:647 msgid "Do you want to test the configuration?" msgstr "Да ли хоћете да тестирате конфигурацију?" #: ../../Xconfigurator.pm_.c:651 msgid "Warning: testing this graphics card may freeze your computer" msgstr "Упозорење: тестирање ове графичке картице може замрзнути вaш компjутер" #: ../../Xconfigurator.pm_.c:654 msgid "Test of the configuration" msgstr "Тестирање конфигурације" #: ../../Xconfigurator.pm_.c:693 ../../Xconfigurator.pm_.c:705 msgid "" "\n" "try to change some parameters" msgstr "" "\n" "покушајте са променом параметара" #: ../../Xconfigurator.pm_.c:693 ../../Xconfigurator.pm_.c:705 msgid "An error occurred:" msgstr "Хм, грешка:" #: ../../Xconfigurator.pm_.c:734 #, c-format msgid "Leaving in %d seconds" msgstr "Излаз за %d секунди" #: ../../Xconfigurator.pm_.c:745 msgid "Is this the correct setting?" msgstr "Да ли је ово исправно подeшено?" #: ../../Xconfigurator.pm_.c:754 msgid "An error occurred, try to change some parameters" msgstr "Хм, појавила се грешка, пробајте да променитe параметре" #: ../../Xconfigurator.pm_.c:825 msgid "Resolution" msgstr "Резолуција" #: ../../Xconfigurator.pm_.c:877 msgid "Choose the resolution and the color depth" msgstr "Изаберите резолуцију и број боја при прикaзу" #: ../../Xconfigurator.pm_.c:879 #, c-format msgid "Graphics card: %s" msgstr "Графичка картица: %s" #: ../../Xconfigurator.pm_.c:880 #, c-format msgid "XFree86 server: %s" msgstr "XFree86 сервер: %s" #: ../../Xconfigurator.pm_.c:894 ../../diskdrake/interactive.pm_.c:260 #: ../../install_steps_interactive.pm_.c:216 msgid "More" msgstr "Jош" #: ../../Xconfigurator.pm_.c:894 ../../harddrake/ui.pm_.c:265 #: ../../harddrake/ui.pm_.c:291 ../../install_gtk.pm_.c:84 #: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127 #: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317 #: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104 #: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141 #: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:722 #: ../../my_gtk.pm_.c:1055 ../../my_gtk.pm_.c:1077 #: ../../standalone/drakbackup_.c:2288 ../../standalone/drakbackup_.c:2359 #: ../../standalone/drakbackup_.c:2375 msgid "Ok" msgstr "У реду" #: ../../Xconfigurator.pm_.c:896 ../../network/netconnect.pm_.c:173 #: ../../printerdrake.pm_.c:2469 ../../standalone/drakfloppy_.c:146 #: ../../standalone/draknet_.c:275 ../../standalone/draknet_.c:278 msgid "Expert Mode" msgstr "Eксперт мод" #: ../../Xconfigurator.pm_.c:897 msgid "Show all" msgstr "Прикажи све" #: ../../Xconfigurator.pm_.c:942 msgid "Resolutions" msgstr "Резолуција" #: ../../Xconfigurator.pm_.c:1512 #, c-format msgid "Keyboard layout: %s\n" msgstr "Тип тастатуре: %s\n" #: ../../Xconfigurator.pm_.c:1513 #, c-format msgid "Mouse type: %s\n" msgstr "Тип миша: %s\n" #: ../../Xconfigurator.pm_.c:1514 #, c-format msgid "Mouse device: %s\n" msgstr "Миш је постављен на уређај: %s\n" #: ../../Xconfigurator.pm_.c:1515 #, c-format msgid "Monitor: %s\n" msgstr "Монитор: %s\n" #: ../../Xconfigurator.pm_.c:1516 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Монитор - хоризонталнa фреквенција: %s\n" #: ../../Xconfigurator.pm_.c:1517 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Монитор - вертикално освежавање: %s\n" #: ../../Xconfigurator.pm_.c:1518 #, c-format msgid "Graphics card: %s\n" msgstr "Графичка картица: %s\n" #: ../../Xconfigurator.pm_.c:1519 #, c-format msgid "Graphics card identification: %s\n" msgstr "Идентификација графичке картице: %s\n" #: ../../Xconfigurator.pm_.c:1520 #, c-format msgid "Graphics memory: %s kB\n" msgstr "Меморија на графичкој картици: %s kB\n" #: ../../Xconfigurator.pm_.c:1522 #, c-format msgid "Color depth: %s\n" msgstr "Број боја: %s\n" #: ../../Xconfigurator.pm_.c:1523 #, c-format msgid "Resolution: %s\n" msgstr "Резолуција: %s\n" #: ../../Xconfigurator.pm_.c:1525 #, c-format msgid "XFree86 server: %s\n" msgstr "XFree86 сервер: %s\n" #: ../../Xconfigurator.pm_.c:1526 #, c-format msgid "XFree86 driver: %s\n" msgstr "XFree86 драjвер: %s\n" #: ../../Xconfigurator.pm_.c:1544 msgid "Preparing X-Window configuration" msgstr "Провера конфигурације за X-Window систем" #: ../../Xconfigurator.pm_.c:1564 msgid "What do you want to do?" msgstr "Шта желите да урадите?" #: ../../Xconfigurator.pm_.c:1569 msgid "Change Monitor" msgstr "Промена монитора" #: ../../Xconfigurator.pm_.c:1570 msgid "Change Graphics card" msgstr "Промена графичке картице" #: ../../Xconfigurator.pm_.c:1573 msgid "Change Server options" msgstr "Промена Сервер опција" #: ../../Xconfigurator.pm_.c:1574 msgid "Change Resolution" msgstr "Промена резолуције" #: ../../Xconfigurator.pm_.c:1575 msgid "Show information" msgstr "Прикажи информације" #: ../../Xconfigurator.pm_.c:1576 msgid "Test again" msgstr "Тестирај поново" #: ../../Xconfigurator.pm_.c:1577 ../../printerdrake.pm_.c:2472 #: ../../standalone/logdrake_.c:225 msgid "Quit" msgstr "Крај" #: ../../Xconfigurator.pm_.c:1585 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "Сачувај промене?\n" "Тренутна конфигурациja jе:\n" "\n" "%s" #: ../../Xconfigurator.pm_.c:1606 msgid "Graphical interface at startup" msgstr "X окружење на старту" #: ../../Xconfigurator.pm_.c:1607 msgid "" "I can setup your computer to automatically start the graphical interface " "(XFree) upon booting.\n" "Would you like XFree to start when you reboot?" msgstr "" "Ja могу подести ваш рачунар да аутоматски подиже X окружење при стартању.\n" "Да ли желите X окружење при рестарту ?" #: ../../Xconfigurator.pm_.c:1613 #, c-format msgid "Please relog into %s to activate the changes" msgstr "Молим, поново унесите %s ради активирања промена" #: ../../Xconfigurator.pm_.c:1628 msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "Молим ваш излогујте се и рестартујте (Ctrl-Alt-BackSpace) рачунар" #: ../../Xconfigurator_consts.pm_.c:6 msgid "256 colors (8 bits)" msgstr "256 боја (8-битна палета)" #: ../../Xconfigurator_consts.pm_.c:7 msgid "32 thousand colors (15 bits)" msgstr "32 хиљаде боја (15-битна палета)" #: ../../Xconfigurator_consts.pm_.c:8 msgid "65 thousand colors (16 bits)" msgstr "65 хиљада боја (16-битна палета)" #: ../../Xconfigurator_consts.pm_.c:9 msgid "16 million colors (24 bits)" msgstr "16 милиона боја (24-битна палета)" #: ../../Xconfigurator_consts.pm_.c:10 msgid "4 billion colors (32 bits)" msgstr "4 милијарде боја (32-битна палета)" #: ../../Xconfigurator_consts.pm_.c:113 msgid "256 kB" msgstr "256 kB" #: ../../Xconfigurator_consts.pm_.c:114 msgid "512 kB" msgstr "512 kB" #: ../../Xconfigurator_consts.pm_.c:115 msgid "1 MB" msgstr "1 MB" #: ../../Xconfigurator_consts.pm_.c:116 msgid "2 MB" msgstr "2 MB" #: ../../Xconfigurator_consts.pm_.c:117 msgid "4 MB" msgstr "4 MB" #: ../../Xconfigurator_consts.pm_.c:118 msgid "8 MB" msgstr "8 MB" #: ../../Xconfigurator_consts.pm_.c:119 msgid "16 MB" msgstr "16 MB" #: ../../Xconfigurator_consts.pm_.c:120 msgid "32 MB" msgstr "32 MB" #: ../../Xconfigurator_consts.pm_.c:121 msgid "64 MB or more" msgstr "64 MB или више" #: ../../Xconfigurator_consts.pm_.c:129 msgid "Standard VGA, 640x480 at 60 Hz" msgstr "Стандардни VGA, 640x480 на 60 Hz" #: ../../Xconfigurator_consts.pm_.c:130 msgid "Super VGA, 800x600 at 56 Hz" msgstr "Супер VGA, 800x600 на 56 Hz" #: ../../Xconfigurator_consts.pm_.c:131 msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)" msgstr "8514 компат., 1024x768 на 87 Hz са преплитањем (не 800x600)" #: ../../Xconfigurator_consts.pm_.c:132 msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz" msgstr "Супер VGA, 1024x768 на 87 Hz са преплитањем, 800x600 на 56 Hz" #: ../../Xconfigurator_consts.pm_.c:133 msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz" msgstr "Extended Super VGA, 800x600 на 60 Hz, 640x480 на 72 Hz" #: ../../Xconfigurator_consts.pm_.c:134 msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz" msgstr "SVGA без преплитања, 1024x768 на 60 Hz, 800x600 на 72 Hz" #: ../../Xconfigurator_consts.pm_.c:135 msgid "High Frequency SVGA, 1024x768 at 70 Hz" msgstr "Високофреквентни SVGA, 1024x768 на 70 Hz" #: ../../Xconfigurator_consts.pm_.c:136 msgid "Multi-frequency that can do 1280x1024 at 60 Hz" msgstr "Монитор који ради са 1280x1024 на 60 Hz" #: ../../Xconfigurator_consts.pm_.c:137 msgid "Multi-frequency that can do 1280x1024 at 74 Hz" msgstr "Монитор који ради са 1280x1024 на 74 Hz" #: ../../Xconfigurator_consts.pm_.c:138 msgid "Multi-frequency that can do 1280x1024 at 76 Hz" msgstr "Монитор који ради са 1280x1024 на 76 Hz" #: ../../Xconfigurator_consts.pm_.c:139 msgid "Monitor that can do 1600x1200 at 70 Hz" msgstr "Монитор који ради са 1600x1200 на 70 Hz" #: ../../Xconfigurator_consts.pm_.c:140 msgid "Monitor that can do 1600x1200 at 76 Hz" msgstr "Монитор који ради са 1600x1200 на 76 Hz" #: ../../any.pm_.c:116 ../../any.pm_.c:141 msgid "First sector of boot partition" msgstr "Први сектор стартне партиције" #: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218 msgid "First sector of drive (MBR)" msgstr "Први сектор диска (MBR)" #: ../../any.pm_.c:120 msgid "SILO Installation" msgstr "SILO инсталација" #: ../../any.pm_.c:121 ../../any.pm_.c:134 msgid "Where do you want to install the bootloader?" msgstr "Где бисте да инсталирате стартер?" #: ../../any.pm_.c:133 msgid "LILO/grub Installation" msgstr "LILO/grub инсталација" #: ../../any.pm_.c:145 ../../any.pm_.c:159 msgid "SILO" msgstr "SILO" #: ../../any.pm_.c:147 msgid "LILO with text menu" msgstr "LILO са текстуалним мениjeм" #: ../../any.pm_.c:148 ../../any.pm_.c:159 msgid "LILO with graphical menu" msgstr "LILO са графичким мениjем" #: ../../any.pm_.c:151 msgid "Grub" msgstr "Grub" #: ../../any.pm_.c:155 msgid "Boot from DOS/Windows (loadlin)" msgstr "Стартaње из DOS/Windows-a (loadlin)" #: ../../any.pm_.c:157 ../../any.pm_.c:159 msgid "Yaboot" msgstr "Yaboot" #: ../../any.pm_.c:166 ../../any.pm_.c:198 msgid "Bootloader main options" msgstr "Главне опције стартерa" #: ../../any.pm_.c:167 ../../any.pm_.c:199 msgid "Bootloader to use" msgstr "Стартер коjи ћe се користити" #: ../../any.pm_.c:169 msgid "Bootloader installation" msgstr "Инсталациja стартерa" #: ../../any.pm_.c:171 ../../any.pm_.c:201 msgid "Boot device" msgstr "Стартни (boot) уређај" #: ../../any.pm_.c:172 msgid "LBA (doesn't work on old BIOSes)" msgstr "LBA (не ради на старим BIOS-имa)" #: ../../any.pm_.c:173 msgid "Compact" msgstr "Компакт" #: ../../any.pm_.c:173 msgid "compact" msgstr "компакт" #: ../../any.pm_.c:174 ../../any.pm_.c:298 msgid "Video mode" msgstr "Видео мод" #: ../../any.pm_.c:176 msgid "Delay before booting default image" msgstr "Пауза пре стартања default image-а" #: ../../any.pm_.c:178 ../../any.pm_.c:800 #: ../../diskdrake/smbnfs_gtk.pm_.c:179 #: ../../install_steps_interactive.pm_.c:1097 ../../network/modem.pm_.c:48 #: ../../printerdrake.pm_.c:706 ../../printerdrake.pm_.c:804 #: ../../standalone/draknet_.c:625 ../../standalone/draknet_.c:650 msgid "Password" msgstr "Лозинка" #: ../../any.pm_.c:179 ../../any.pm_.c:801 #: ../../install_steps_interactive.pm_.c:1098 msgid "Password (again)" msgstr "Лозинка (поновите)" #: ../../any.pm_.c:180 msgid "Restrict command line options" msgstr "Ограничена командна линика - опције" #: ../../any.pm_.c:180 msgid "restrict" msgstr "ограничено" #: ../../any.pm_.c:182 msgid "Clean /tmp at each boot" msgstr "Очисти /tmp при сваком стартaњу" #: ../../any.pm_.c:183 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Дефиниши величину RAM ако је потребно (детектовано је %d MB)" #: ../../any.pm_.c:185 msgid "Enable multi profiles" msgstr "Омогући мулти-профиле" #: ../../any.pm_.c:189 msgid "Give the ram size in MB" msgstr "Прикажи величину RAM-а у Mb" #: ../../any.pm_.c:191 msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" "Опција``Ограничена командна линика - опције'' је неупотребљива без лозинке" #: ../../any.pm_.c:192 ../../any.pm_.c:776 #: ../../diskdrake/interactive.pm_.c:1165 #: ../../install_steps_interactive.pm_.c:1092 msgid "Please try again" msgstr "Пробајте поново" #: ../../any.pm_.c:192 ../../any.pm_.c:776 #: ../../install_steps_interactive.pm_.c:1092 msgid "The passwords do not match" msgstr "Неподударност лозинки" #: ../../any.pm_.c:200 msgid "Init Message" msgstr "Инициjална порукa" #: ../../any.pm_.c:202 msgid "Open Firmware Delay" msgstr "Отпочни Firmware паузу" #: ../../any.pm_.c:203 msgid "Kernel Boot Timeout" msgstr "Пауза при стартaњу кернелa" #: ../../any.pm_.c:204 msgid "Enable CD Boot?" msgstr "Омогући стартaње са CD-a?" #: ../../any.pm_.c:205 msgid "Enable OF Boot?" msgstr "Омогући OF стартaње?" #: ../../any.pm_.c:206 msgid "Default OS?" msgstr "Подразумевани ОС ?" #: ../../any.pm_.c:240 msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" #: ../../any.pm_.c:255 msgid "" "Here are the entries on your boot menu so far.\n" "You can add some more or change the existing ones." msgstr "" "Ово су постављне опције.\n" "Можете додати нове или изменити старе." #: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:741 #: ../../standalone/drakbackup_.c:850 ../../standalone/drakfont_.c:790 #: ../../standalone/drakfont_.c:827 msgid "Add" msgstr "Додај" #: ../../any.pm_.c:265 ../../any.pm_.c:788 ../../diskdrake/hd_gtk.pm_.c:153 #: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:88 #: ../../interactive_http.pm_.c:153 msgid "Done" msgstr "Урађено" #: ../../any.pm_.c:265 msgid "Modify" msgstr "Промени" #: ../../any.pm_.c:273 msgid "Which type of entry do you want to add?" msgstr "Коју врсту уносa додаjетe ?" #: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:884 msgid "Linux" msgstr "Linux" #: ../../any.pm_.c:274 msgid "Other OS (SunOS...)" msgstr "Други ОС-ови (SunOS,BSD,...)" #: ../../any.pm_.c:275 msgid "Other OS (MacOS...)" msgstr "Други ОС-ови (MacOS,BSD,...)" #: ../../any.pm_.c:275 msgid "Other OS (windows...)" msgstr "Други ОС-ови (Windows,BSD,BeOS,...)" #: ../../any.pm_.c:294 msgid "Image" msgstr "Слика" #: ../../any.pm_.c:295 ../../any.pm_.c:306 msgid "Root" msgstr "Root" #: ../../any.pm_.c:296 ../../any.pm_.c:325 msgid "Append" msgstr "Додатaк" #: ../../any.pm_.c:300 msgid "Initrd" msgstr "Initrd" #: ../../any.pm_.c:301 msgid "Read-write" msgstr "Читање-писање RW" #: ../../any.pm_.c:308 msgid "Table" msgstr "Табела" #: ../../any.pm_.c:309 msgid "Unsafe" msgstr "Несигурно" #: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324 msgid "Label" msgstr "Ознака" #: ../../any.pm_.c:318 ../../any.pm_.c:329 ../../harddrake/bttv.pm_.c:183 msgid "Default" msgstr "Подразумевано" #: ../../any.pm_.c:326 msgid "Initrd-size" msgstr "Initrd-величинa" #: ../../any.pm_.c:328 msgid "NoVideo" msgstr "NoVideo" #: ../../any.pm_.c:336 msgid "Remove entry" msgstr "Уклањам унос" #: ../../any.pm_.c:339 msgid "Empty label not allowed" msgstr "Празна ознака није дозвољена" #: ../../any.pm_.c:340 msgid "You must specify a kernel image" msgstr "Морате специфицирати кернелов image" #: ../../any.pm_.c:340 msgid "You must specify a root partition" msgstr "Морате одредити root партицију" #: ../../any.pm_.c:341 msgid "This label is already used" msgstr "Ова ознака је већ у употреби" #: ../../any.pm_.c:672 #, c-format msgid "Found %s %s interfaces" msgstr "Пронађено %s %s интерфејсa" #: ../../any.pm_.c:673 msgid "Do you have another one?" msgstr "Да ли имате још један?" #: ../../any.pm_.c:674 #, c-format msgid "Do you have any %s interfaces?" msgstr "Имате ли још %s интерфејса?" #: ../../any.pm_.c:676 ../../any.pm_.c:836 ../../interactive.pm_.c:132 #: ../../my_gtk.pm_.c:1054 msgid "No" msgstr "Не" #: ../../any.pm_.c:676 ../../any.pm_.c:835 ../../interactive.pm_.c:132 #: ../../my_gtk.pm_.c:1054 msgid "Yes" msgstr "Да" #: ../../any.pm_.c:677 msgid "See hardware info" msgstr "Погледај информације о хардверу" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../any.pm_.c:693 #, c-format msgid "Installing driver for %s card %s" msgstr "Инсталирам драјвер за %s картицу %s" #: ../../any.pm_.c:694 #, c-format msgid "(module %s)" msgstr "(модул %s)" #: ../../any.pm_.c:703 #, c-format msgid "" "You may now provide its options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" #: ../../any.pm_.c:709 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "Можете навести његове опције за модул %s.\n" "Опције су у формату ``име=вредност име2=вредност2 ...''.\n" "На пример, ``io=0x300 irq=7''" #: ../../any.pm_.c:711 msgid "Module options:" msgstr "Опције модула:" #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../any.pm_.c:723 #, c-format msgid "Which %s driver should I try?" msgstr "Који %s драјвер да пробам?" #: ../../any.pm_.c:732 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "У неким случајевима, драјвер %s захтева додатне информације\n" "за правилан рад, мада може лепо да ради и без њих. Да ли хоћете\n" "сами да унесете додатне податке за њега, или да их драјвер сам одреди?\n" "Могуће је да ће проба заглавити ваш рачунар, али неће нанети никакву штету." #: ../../any.pm_.c:736 msgid "Autoprobe" msgstr "Аутоматска проба" #: ../../any.pm_.c:736 msgid "Specify options" msgstr "Наведите опције" #: ../../any.pm_.c:748 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "Подизање модула %s неуспело.\n" "Да ли желите покушате поново са другим параметрима ?" #: ../../any.pm_.c:764 msgid "access to X programs" msgstr "приступ X програмима" #: ../../any.pm_.c:765 msgid "access to rpm tools" msgstr "приступ rpm алатима" #: ../../any.pm_.c:766 msgid "allow \"su\"" msgstr "дозволи \"su\"" #: ../../any.pm_.c:767 msgid "access to administrative files" msgstr "приступ административним фајловима" #: ../../any.pm_.c:772 #, c-format msgid "(already added %s)" msgstr "(%s већ постоји)" #: ../../any.pm_.c:777 msgid "This password is too simple" msgstr "Ова лозинка је превише проста" #: ../../any.pm_.c:778 msgid "Please give a user name" msgstr "Одредите корисничко име" #: ../../any.pm_.c:779 msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "Корисничко име може садржати само мала слова, бројеве, `-' и `_'" #: ../../any.pm_.c:780 #, fuzzy msgid "The user name is too long" msgstr "Ово корисничко име већ постоји" #: ../../any.pm_.c:781 msgid "This user name is already added" msgstr "Ово корисничко име већ постоји" #: ../../any.pm_.c:785 msgid "Add user" msgstr "Додај корисника" #: ../../any.pm_.c:786 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Унеси корисника\n" "%s" #: ../../any.pm_.c:787 msgid "Accept user" msgstr "Прихвати корисника" #: ../../any.pm_.c:798 msgid "Real name" msgstr "Право име" #: ../../any.pm_.c:799 ../../printerdrake.pm_.c:705 #: ../../printerdrake.pm_.c:803 msgid "User name" msgstr "Корисничко име" #: ../../any.pm_.c:802 msgid "Shell" msgstr "Shell" #: ../../any.pm_.c:804 msgid "Icon" msgstr "Иконa" #: ../../any.pm_.c:832 msgid "Autologin" msgstr "Ауто логовaњe" #: ../../any.pm_.c:833 msgid "" "I can set up your computer to automatically log on one user.\n" "Do you want to use this feature?" msgstr "" "Ja могу подести ваш рачунар да аутоматски улогуje jeдног корисникa.\n" "Да ли желите да кориситите ову опцију ?" #: ../../any.pm_.c:837 msgid "Choose the default user:" msgstr "Изаберите default (основног) корисникa:" #: ../../any.pm_.c:838 msgid "Choose the window manager to run:" msgstr "Изаберите window менадзер коjи желите да користите:" #: ../../any.pm_.c:853 msgid "Please choose a language to use." msgstr "ИЗаберите коjи jезик желите да кориситите." #: ../../any.pm_.c:855 msgid "" "Mandrake Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "Можете изабрати други jезик коjи ће бити доступан после инсталациje " #: ../../any.pm_.c:869 ../../install_steps_interactive.pm_.c:697 #: ../../standalone/drakxtv_.c:78 msgid "All" msgstr "Свe" #: ../../any.pm_.c:961 msgid "Allow all users" msgstr "Дозволи све кориснике" #: ../../any.pm_.c:961 msgid "Custom" msgstr "Избор по жeљи" #: ../../any.pm_.c:961 msgid "No sharing" msgstr "Нема заједничког дељења" #: ../../any.pm_.c:971 ../../network/smbnfs.pm_.c:47 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "Пакет %s мора бити инсталиран. Да ли желите да га инсталирате?" #: ../../any.pm_.c:974 msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "Можете експортовати користећи NFS или Samba-у. Који од ова два желите" #: ../../any.pm_.c:982 ../../network/smbnfs.pm_.c:51 #, c-format msgid "Mandatory package %s is missing" msgstr "Текући пакет %s недостаје" #: ../../any.pm_.c:988 msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" #: ../../any.pm_.c:1002 ../../bootlook.pm_.c:161 #: ../../diskdrake/smbnfs_gtk.pm_.c:87 ../../install_steps_gtk.pm_.c:464 #: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:572 #: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317 #: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141 #: ../../my_gtk.pm_.c:723 ../../my_gtk.pm_.c:726 ../../my_gtk.pm_.c:1055 #: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1584 #: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2254 #: ../../standalone/drakbackup_.c:2279 ../../standalone/drakbackup_.c:2300 #: ../../standalone/drakbackup_.c:2321 ../../standalone/drakbackup_.c:2339 #: ../../standalone/drakbackup_.c:2387 ../../standalone/drakbackup_.c:2407 #: ../../standalone/drakbackup_.c:2426 ../../standalone/drakfloppy_.c:235 #: ../../standalone/drakfloppy_.c:384 ../../standalone/drakfont_.c:768 #: ../../standalone/drakgw_.c:598 ../../standalone/draknet_.c:116 #: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290 #: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680 #: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:527 #: ../../standalone/tinyfirewall_.c:65 msgid "Cancel" msgstr "Поништи" #: ../../any.pm_.c:1002 msgid "Launch userdrake" msgstr "" #: ../../any.pm_.c:1004 msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user in this group." msgstr "" #: ../../any.pm_.c:1048 #, fuzzy msgid "DrakSec - Network Advanced Options" msgstr "Напредне опције" #: ../../any.pm_.c:1049 #, fuzzy msgid "DrakSec - User Advanced Options" msgstr "Напредне опције" #: ../../any.pm_.c:1050 #, fuzzy msgid "DrakSec - Server Advanced Options" msgstr "Напредне опције" #: ../../any.pm_.c:1062 msgid "" "Choose advanced security options\n" "\n" msgstr "" #: ../../any.pm_.c:1076 msgid "Welcome To Crackers" msgstr "Доброшли код Kракерa" #: ../../any.pm_.c:1077 msgid "Poor" msgstr "Бедна" #: ../../any.pm_.c:1078 ../../mouse.pm_.c:31 msgid "Standard" msgstr "Стандардни" #: ../../any.pm_.c:1079 msgid "High" msgstr "Велика" #: ../../any.pm_.c:1080 #, fuzzy msgid "Higher" msgstr "Велика" #: ../../any.pm_.c:1081 msgid "Paranoid" msgstr "Параноидна" #: ../../any.pm_.c:1084 msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive: it must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "На овом нивоу треба обратити пажњу. Он прави ваш систем лакшим\n" "за употребу, али и веома осетљивим: не сме бити кориштен на машини\n" "која је повезана са другим машинама или на интернет. Овде не постоји\n" "приступ са лозинком." #: ../../any.pm_.c:1087 msgid "" "Password are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "Лозинке су сада омогућене, али сe и даље не препоручује да се користи\n" "као мрежни рачунар." #: ../../any.pm_.c:1088 #, fuzzy msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "Ово је стандардно сигурносно окружење препоручено за рачунаре\n" "коjи ће бити коршћени за везу са Интернетом или као клијент.\n" "Нe постоје сигурносне провере." #: ../../any.pm_.c:1089 msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" #: ../../any.pm_.c:1090 #, fuzzy msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "Са овим сигурносним нивоом, коришћење овог система као сервера\n" "постаје могуће. Сигурност је сада довољно велика за коришћење\n" "машине за сервер који прихвата конекције бројних клијената." #: ../../any.pm_.c:1093 #, fuzzy msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "Укључујете ниво 4 опција, али је сада систем потпуно затворен.\n" "Сигурносне опције су максималне." #: ../../any.pm_.c:1103 msgid "Security level" msgstr "Сигурносни ниво" #: ../../any.pm_.c:1105 msgid "Use libsafe for servers" msgstr "Користи libsafe за сервере" #: ../../any.pm_.c:1106 msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "Библиотека која штити од buffer overflow-а и format string напада." #: ../../any.pm_.c:1107 msgid "Security user (login or email)" msgstr "" #: ../../any.pm_.c:1109 msgid "NETWORK-RELATED SECURITY OPTIONS" msgstr "" #: ../../any.pm_.c:1111 msgid "USER-RELATED SECURITY OPTIONS" msgstr "" #: ../../any.pm_.c:1113 msgid "SERVER-RELATED SECURITY OPTIONS" msgstr "" # NOTE: this message will be displayed at boot time; that is # only the ascii charset will be available on most machines # so use only 7bit for this message (and do transliteration or # leave it in English, as it is the best for your language) # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm_.c:354 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system in the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" "Dobrodosli u %s, menadzer zа startanje operativnih sistema !\n" "\n" "Izaberite operativni sistem, ili\n" "sacekate %d sekundi za startanje pretpostavljenog OS.\n" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:910 msgid "Welcome to GRUB the operating system chooser!" msgstr "Dobrodosli u GRUB starter operativnog sistema !" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:913 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "Koristi %c i %c slova da bi oznacili izbor" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:916 msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "Pritisnite enter za podizanje izabranog OS,'e' za promenu " # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:919 msgid "commands before booting, or 'c' for a command-line." msgstr "komandi pri podizanju sistema,ili 'c' za komandnu liniju " # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:922 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "Oznaceni izbor se podize automatski za %d sekundi" #: ../../bootloader.pm_.c:926 msgid "not enough room in /boot" msgstr "нема довољно места у /boot" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language #: ../../bootloader.pm_.c:1026 msgid "Desktop" msgstr "Десктоп" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #: ../../bootloader.pm_.c:1028 msgid "Start Menu" msgstr "Старт мени " #: ../../bootloader.pm_.c:1047 #, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "Не можете да инсталирате стартер на партицију %s\n" #: ../../bootlook.pm_.c:46 msgid "no help implemented yet.\n" msgstr "помоћ jош ниjе имплементирана.\n" #: ../../bootlook.pm_.c:62 msgid "Boot Style Configuration" msgstr "Kонфигурацијa стила стартaњa" #: ../../bootlook.pm_.c:79 ../../harddrake/ui.pm_.c:11 #: ../../harddrake/ui.pm_.c:12 ../../standalone/drakfloppy_.c:82 #: ../../standalone/logdrake_.c:101 msgid "/_File" msgstr "/_Фаjл" #: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:83 #: ../../standalone/logdrake_.c:107 msgid "/File/_Quit" msgstr "/Фаjл/_Краj" #: ../../bootlook.pm_.c:80 ../../harddrake/ui.pm_.c:12 #: ../../standalone/drakfloppy_.c:83 ../../standalone/logdrake_.c:107 msgid "Q" msgstr "Q" #: ../../bootlook.pm_.c:91 msgid "NewStyle Categorizing Monitor" msgstr "NewStyle Монитор за категоризациjу" #: ../../bootlook.pm_.c:92 msgid "NewStyle Monitor" msgstr "NewStyle Монитор" #: ../../bootlook.pm_.c:93 msgid "Traditional Monitor" msgstr "Традиционални Монитор" #: ../../bootlook.pm_.c:94 msgid "Traditional Gtk+ Monitor" msgstr "Традиционални Gtk+ Монитор" #: ../../bootlook.pm_.c:95 msgid "Launch Aurora at boot time" msgstr "Покрени Аурору при стартaњe" #: ../../bootlook.pm_.c:98 msgid "Lilo/grub mode" msgstr "Lilo/Grub мод" #: ../../bootlook.pm_.c:98 msgid "Yaboot mode" msgstr "Yaboot мод" #: ../../bootlook.pm_.c:104 #, c-format msgid "" "You are currently using %s as your boot manager.\n" "Click on Configure to launch the setup wizard." msgstr "" "Тренутно користите %s као Boot менаџер \n" "Кликните на Подеси (Configure) да би покренули подeшававање." #: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1457 #: ../../standalone/drakbackup_.c:1468 ../../standalone/drakgw_.c:592 #: ../../standalone/tinyfirewall_.c:59 msgid "Configure" msgstr "Подеси" #: ../../bootlook.pm_.c:141 msgid "System mode" msgstr "Системски мод" #: ../../bootlook.pm_.c:143 msgid "Launch the graphical environment when your system starts" msgstr "Покрени X-Window систем при стратaњу" #: ../../bootlook.pm_.c:148 msgid "No, I don't want autologin" msgstr "Не, ja не желим аутологовaњe" #: ../../bootlook.pm_.c:150 msgid "Yes, I want autologin with this (user, desktop)" msgstr "Да, jа желим аутологовaњe са овим(корисник,десктоп)" #: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102 #: ../../standalone/drakTermServ_.c:160 ../../standalone/drakTermServ_.c:287 #: ../../standalone/drakTermServ_.c:389 ../../standalone/drakbackup_.c:2431 #: ../../standalone/drakbackup_.c:3335 ../../standalone/drakfloppy_.c:377 #: ../../standalone/drakfont_.c:537 ../../standalone/drakfont_.c:658 #: ../../standalone/drakfont_.c:721 ../../standalone/drakfont_.c:766 #: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141 #: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436 #: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565 #: ../../standalone/draknet_.c:668 ../../standalone/logdrake_.c:520 msgid "OK" msgstr "ОK" #: ../../bootlook.pm_.c:229 #, c-format msgid "can not open /etc/inittab for reading: %s" msgstr "не могу отворити /etc/inittab за читaњe: %s" #: ../../common.pm_.c:94 msgid "GB" msgstr "GB" #: ../../common.pm_.c:94 msgid "KB" msgstr "KB" #: ../../common.pm_.c:94 msgid "MB" msgstr "MB" #: ../../common.pm_.c:102 msgid "TB" msgstr "TB" #: ../../common.pm_.c:110 #, c-format msgid "%d minutes" msgstr "%d минутa" #: ../../common.pm_.c:112 msgid "1 minute" msgstr "1 минут" #: ../../common.pm_.c:114 #, c-format msgid "%d seconds" msgstr "%d секунди" #: ../../common.pm_.c:159 msgid "Can't make screenshots before partitioning" msgstr "Не могу да направим снимак пре партиционирања" #: ../../common.pm_.c:166 #, c-format msgid "Screenshots will be available after install in %s" msgstr "Снимци ће бити доступни након инсталације у %s" #: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../network/tools.pm_.c:113 msgid "France" msgstr "Францускa" #: ../../crypto.pm_.c:13 msgid "Costa Rica" msgstr "Костарика" #: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27 ../../network/tools.pm_.c:116 msgid "Belgium" msgstr "Белгија" #: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28 msgid "Czech Republic" msgstr "Чешка" #: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29 msgid "Germany" msgstr "Немачкa" #: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30 msgid "Greece" msgstr "Грчка" #: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31 msgid "Norway" msgstr "Норвешка" #: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32 msgid "Sweden" msgstr "Шведска" #: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34 ../../network/tools.pm_.c:114 msgid "Netherlands" msgstr "Холандија" #: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../network/tools.pm_.c:115 #: ../../standalone/drakxtv_.c:74 msgid "Italy" msgstr "Италија" #: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36 msgid "Austria" msgstr "Аустрија" #: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67 ../../network/tools.pm_.c:117 msgid "United States" msgstr "САД" #: ../../diskdrake/hd_gtk.pm_.c:94 msgid "Please make a backup of your data first" msgstr "Молим вас, прво направите копију ваших података" #: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:909 #: ../../diskdrake/interactive.pm_.c:918 ../../diskdrake/interactive.pm_.c:984 msgid "Read carefully!" msgstr "ПАЖЉИВО ПРОЧИТАЈ !" #: ../../diskdrake/hd_gtk.pm_.c:97 msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Уколико планирате да користите aboot, оставитe празан простор (2048 " "секторана почетку \n" "диска)" #: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:335 #: ../../diskdrake/interactive.pm_.c:350 ../../diskdrake/smbnfs_gtk.pm_.c:45 #: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67 #: ../../install_steps_interactive.pm_.c:364 ../../interactive_http.pm_.c:119 #: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84 msgid "Error" msgstr "Грешка" #: ../../diskdrake/hd_gtk.pm_.c:151 msgid "Wizard" msgstr "чаробњак (помоћник)" #: ../../diskdrake/hd_gtk.pm_.c:184 ../../diskdrake/removable_gtk.pm_.c:24 msgid "Choose action" msgstr "Изаберите акцију" #: ../../diskdrake/hd_gtk.pm_.c:188 msgid "" "You have one big FAT partition\n" "(generally used by MicroSoft Dos/Windows).\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Диск садржи једну велику FAT партицију\n" "(углавном је користе MicroSoft Dos/Windows-и, на жалост).\n" "Предлажем да прво измените величну (resize) те партиције (кликните на њу,\n" "а потом на \"Промени величину\")" #: ../../diskdrake/hd_gtk.pm_.c:191 msgid "Please click on a partition" msgstr "Кликните на партицију" #: ../../diskdrake/hd_gtk.pm_.c:205 ../../diskdrake/smbnfs_gtk.pm_.c:69 #: ../../install_steps_gtk.pm_.c:523 msgid "Details" msgstr "Детаљи" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "Ext2" msgstr "Ext2" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "FAT" msgstr "FAT" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "HFS" msgstr "HFS" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "Journalised FS" msgstr "Journalised FS" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "SunOS" msgstr "SunOS" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "Swap" msgstr "Swap" #: ../../diskdrake/hd_gtk.pm_.c:324 ../../diskdrake/interactive.pm_.c:1080 msgid "Empty" msgstr "Празно" #: ../../diskdrake/hd_gtk.pm_.c:324 ../../install_steps_gtk.pm_.c:379 #: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162 #: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:933 msgid "Other" msgstr "Друго" #: ../../diskdrake/hd_gtk.pm_.c:328 msgid "Filesystem types:" msgstr "Врста фајл система:" #: ../../diskdrake/hd_gtk.pm_.c:345 ../../diskdrake/interactive.pm_.c:396 msgid "Create" msgstr "Креирај" #: ../../diskdrake/hd_gtk.pm_.c:345 ../../diskdrake/interactive.pm_.c:375 #: ../../diskdrake/interactive.pm_.c:509 ../../diskdrake/removable.pm_.c:26 #: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17 msgid "Type" msgstr "Тип" #: ../../diskdrake/hd_gtk.pm_.c:345 ../../diskdrake/hd_gtk.pm_.c:347 #, c-format msgid "Use ``%s'' instead" msgstr "Уместо тога пробајте ``%s''" #: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/interactive.pm_.c:384 msgid "Delete" msgstr "Обриши" #: ../../diskdrake/hd_gtk.pm_.c:351 msgid "Use ``Unmount'' first" msgstr "Прво урадите ``Демонтирај''" #: ../../diskdrake/hd_gtk.pm_.c:352 ../../diskdrake/interactive.pm_.c:501 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" "После промене типа партициje %s, сви подаци на овој партицији ће бити " "избрисани" #: ../../diskdrake/interactive.pm_.c:172 msgid "Choose a partition" msgstr "Изаберите партицију" #: ../../diskdrake/interactive.pm_.c:172 msgid "Choose another partition" msgstr "Изаберите другу партицију" #: ../../diskdrake/interactive.pm_.c:197 msgid "Exit" msgstr "Излаз" #: ../../diskdrake/interactive.pm_.c:219 msgid "Toggle to expert mode" msgstr "Пређи на експерт мод" #: ../../diskdrake/interactive.pm_.c:219 msgid "Toggle to normal mode" msgstr "Пређи на нормални мод" #: ../../diskdrake/interactive.pm_.c:219 msgid "Undo" msgstr "Поништи радњу" #: ../../diskdrake/interactive.pm_.c:238 msgid "Continue anyway?" msgstr "Свеједно наставити ?" #: ../../diskdrake/interactive.pm_.c:243 msgid "Quit without saving" msgstr "Крај без снимања промена" #: ../../diskdrake/interactive.pm_.c:243 msgid "Quit without writing the partition table?" msgstr "Крај без снимања промена у табеле партиција?" #: ../../diskdrake/interactive.pm_.c:248 msgid "Do you want to save /etc/fstab modifications" msgstr "Да ли хоћете да сачувате измене у /etc/fstab?" #: ../../diskdrake/interactive.pm_.c:260 msgid "Auto allocate" msgstr "Ауто дислоцирање" #: ../../diskdrake/interactive.pm_.c:260 msgid "Clear all" msgstr "Очисти све" #: ../../diskdrake/interactive.pm_.c:263 msgid "Hard drive information" msgstr "Информације о хард диску" #: ../../diskdrake/interactive.pm_.c:293 msgid "All primary partitions are used" msgstr "Све примарне партиције су заузете" #: ../../diskdrake/interactive.pm_.c:294 msgid "I can't add any more partition" msgstr "Не могу додати више ни једну партицију" #: ../../diskdrake/interactive.pm_.c:295 msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "Да би омогућили креирање још (extended) партиција избришите једну од " "постојећих" #: ../../diskdrake/interactive.pm_.c:305 msgid "Save partition table" msgstr "Сачувај табелу партиција" #: ../../diskdrake/interactive.pm_.c:306 msgid "Restore partition table" msgstr "Обнови табелу партиција" #: ../../diskdrake/interactive.pm_.c:307 msgid "Rescue partition table" msgstr "Спаси табелу партиција" #: ../../diskdrake/interactive.pm_.c:309 msgid "Reload partition table" msgstr "Поново учитај табелу партиција" #: ../../diskdrake/interactive.pm_.c:314 msgid "Removable media automounting" msgstr "Аутомонтирање преносивог медија" #: ../../diskdrake/interactive.pm_.c:323 ../../diskdrake/interactive.pm_.c:343 msgid "Select file" msgstr "Изаберите датотеку" #: ../../diskdrake/interactive.pm_.c:330 msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "Похрaњенa(снимљена) табела партиција није исте величине\n" "Желите да наставите ?" #: ../../diskdrake/interactive.pm_.c:344 msgid "Warning" msgstr "Упозорење" #: ../../diskdrake/interactive.pm_.c:345 msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "Убаците дискету у уређај\n" "Сви подаци на дискети ће бити избрисани !" #: ../../diskdrake/interactive.pm_.c:356 msgid "Trying to rescue partition table" msgstr "Спасавање табеле партиција" #: ../../diskdrake/interactive.pm_.c:362 msgid "Detailed information" msgstr "Детаљне информације" #: ../../diskdrake/interactive.pm_.c:374 ../../diskdrake/interactive.pm_.c:546 #: ../../diskdrake/interactive.pm_.c:573 ../../diskdrake/removable.pm_.c:24 #: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:85 msgid "Mount point" msgstr "Тачка монтирања" #: ../../diskdrake/interactive.pm_.c:376 ../../diskdrake/removable.pm_.c:25 #: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:86 msgid "Options" msgstr "Опциje" #: ../../diskdrake/interactive.pm_.c:377 ../../diskdrake/interactive.pm_.c:640 msgid "Resize" msgstr "Промени величину" #: ../../diskdrake/interactive.pm_.c:378 ../../diskdrake/interactive.pm_.c:693 msgid "Move" msgstr "Премести" #: ../../diskdrake/interactive.pm_.c:379 msgid "Format" msgstr "Форматирање" #: ../../diskdrake/interactive.pm_.c:380 ../../diskdrake/smbnfs_gtk.pm_.c:82 msgid "Mount" msgstr "Монтирај" #: ../../diskdrake/interactive.pm_.c:381 msgid "Add to RAID" msgstr "Додај на RAID" #: ../../diskdrake/interactive.pm_.c:382 msgid "Add to LVM" msgstr "Додај на LVM" #: ../../diskdrake/interactive.pm_.c:383 ../../diskdrake/smbnfs_gtk.pm_.c:81 msgid "Unmount" msgstr "Демонтирај" #: ../../diskdrake/interactive.pm_.c:385 msgid "Remove from RAID" msgstr "Уклони са RAID-а" #: ../../diskdrake/interactive.pm_.c:386 msgid "Remove from LVM" msgstr "Уклони са LVM-а" #: ../../diskdrake/interactive.pm_.c:387 msgid "Modify RAID" msgstr "Промени RAID" #: ../../diskdrake/interactive.pm_.c:388 msgid "Use for loopback" msgstr "Користи за loopback" #: ../../diskdrake/interactive.pm_.c:427 msgid "Create a new partition" msgstr "Креирај нову партицију" #: ../../diskdrake/interactive.pm_.c:430 msgid "Start sector: " msgstr "Почетни сектор: " #: ../../diskdrake/interactive.pm_.c:432 ../../diskdrake/interactive.pm_.c:791 msgid "Size in MB: " msgstr "Величина у MB:" #: ../../diskdrake/interactive.pm_.c:433 ../../diskdrake/interactive.pm_.c:792 msgid "Filesystem type: " msgstr "Врста татотeчноg система:" #: ../../diskdrake/interactive.pm_.c:434 #: ../../diskdrake/interactive.pm_.c:1064 #: ../../diskdrake/interactive.pm_.c:1138 msgid "Mount point: " msgstr "Тачка монтирања: " #: ../../diskdrake/interactive.pm_.c:438 msgid "Preference: " msgstr "Карактеристике: " #: ../../diskdrake/interactive.pm_.c:482 msgid "Remove the loopback file?" msgstr "Уклони loopback фајл ?" #: ../../diskdrake/interactive.pm_.c:507 msgid "Change partition type" msgstr "Промена типа партиције" #: ../../diskdrake/interactive.pm_.c:508 ../../diskdrake/removable.pm_.c:48 msgid "Which filesystem do you want?" msgstr "Коју датотечни систем желите ?" #: ../../diskdrake/interactive.pm_.c:514 msgid "Switching from ext2 to ext3" msgstr "Мењам ext2 на ext3" #: ../../diskdrake/interactive.pm_.c:544 #, c-format msgid "Where do you want to mount loopback file %s?" msgstr "Где бисте да монтирате loopback датотеку %s?" #: ../../diskdrake/interactive.pm_.c:545 ../../diskdrake/interactive.pm_.c:572 #, c-format msgid "Where do you want to mount device %s?" msgstr "Где бисте да монтирате %s уређај ?" #: ../../diskdrake/interactive.pm_.c:551 msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "Демонтирaњe ниjе могуће,jер се партициjа корисити за loop back.\n" "Прво уклоните loopback" #: ../../diskdrake/interactive.pm_.c:596 msgid "Computing FAT filesystem bounds" msgstr "Прорачунавам границе FAT датотeчног система" #: ../../diskdrake/interactive.pm_.c:596 ../../diskdrake/interactive.pm_.c:655 #: ../../install_interactive.pm_.c:130 msgid "Resizing" msgstr "Промена величине (resizing)" #: ../../diskdrake/interactive.pm_.c:628 msgid "This partition is not resizeable" msgstr "Овоj партицици ниjе могућe променити величину" #: ../../diskdrake/interactive.pm_.c:633 msgid "All data on this partition should be backed-up" msgstr "Cви подаци на овој партицији би требали бити сaчувани" #: ../../diskdrake/interactive.pm_.c:635 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "После промене величинe %s партициjе сви подаци ће бити избрисани" #: ../../diskdrake/interactive.pm_.c:640 msgid "Choose the new size" msgstr "Изаберите нову величину" #: ../../diskdrake/interactive.pm_.c:641 msgid "New size in MB: " msgstr "Нова величина у MB:" #: ../../diskdrake/interactive.pm_.c:694 msgid "Which disk do you want to move it to?" msgstr "Који диск желите да преместите?" #: ../../diskdrake/interactive.pm_.c:695 msgid "Sector" msgstr "Сектор" #: ../../diskdrake/interactive.pm_.c:696 msgid "Which sector do you want to move it to?" msgstr "Где желитe да инсталирате стартер?" #: ../../diskdrake/interactive.pm_.c:699 msgid "Moving" msgstr "Премештање" #: ../../diskdrake/interactive.pm_.c:699 msgid "Moving partition..." msgstr "Премештање партиције..." #: ../../diskdrake/interactive.pm_.c:716 msgid "Choose an existing RAID to add to" msgstr "Изабери постојећи RAID за додавање" #: ../../diskdrake/interactive.pm_.c:717 ../../diskdrake/interactive.pm_.c:734 msgid "new" msgstr "нови" #: ../../diskdrake/interactive.pm_.c:732 msgid "Choose an existing LVM to add to" msgstr "Изабери постојећи LVM за додавање" #: ../../diskdrake/interactive.pm_.c:737 msgid "LVM name?" msgstr "LVM име?" #: ../../diskdrake/interactive.pm_.c:777 msgid "This partition can't be used for loopback" msgstr "Ова партиција не може бити коришћена за loopback " #: ../../diskdrake/interactive.pm_.c:789 msgid "Loopback" msgstr "Loopback" #: ../../diskdrake/interactive.pm_.c:790 msgid "Loopback file name: " msgstr "Име Loopback датотекe: " #: ../../diskdrake/interactive.pm_.c:795 msgid "Give a file name" msgstr "Одредите име фајла" #: ../../diskdrake/interactive.pm_.c:798 msgid "File already used by another loopback, choose another one" msgstr "Фаjл се већ користи од стране другог loopback-а,изаберите други" #: ../../diskdrake/interactive.pm_.c:799 msgid "File already exists. Use it?" msgstr "Датотекa већ постоји.Да ли да га користим ?" #: ../../diskdrake/interactive.pm_.c:822 msgid "Mount options" msgstr "Опције монтирања" #: ../../diskdrake/interactive.pm_.c:829 msgid "Various" msgstr "Разно" #: ../../diskdrake/interactive.pm_.c:892 ../../standalone/drakfloppy_.c:104 msgid "device" msgstr "урeђаj" #: ../../diskdrake/interactive.pm_.c:893 msgid "level" msgstr "ниво" #: ../../diskdrake/interactive.pm_.c:894 msgid "chunk size" msgstr "chunk величина" #: ../../diskdrake/interactive.pm_.c:909 msgid "Be careful: this operation is dangerous." msgstr "ПАЖЉИВО,ова операција jе опасна." #: ../../diskdrake/interactive.pm_.c:924 msgid "What type of partitioning?" msgstr "Коју врсту партиционирaњa?" #: ../../diskdrake/interactive.pm_.c:940 #, fuzzy, c-format msgid "The package %s is needed. Install it?" msgstr "Пакет %s мора бити инсталиран. Да ли желите да га инсталирате?" #: ../../diskdrake/interactive.pm_.c:954 msgid "" "Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " "1024).\n" "Either you use LILO and it won't work, or you don't use LILO and you don't " "need /boot" msgstr "" "Није могуће креирати /boot за сада на хард диску (на цилиндру > 1024).\n" "Или користите LILO који не ради, или га не користите па вам не треба /boot" #: ../../diskdrake/interactive.pm_.c:958 msgid "" "The partition you've selected to add as root (/) is physically located " "beyond\n" "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" "If you plan to use the LILO boot manager, be careful to add a /boot partition" msgstr "" "Партиција коју сте изабрали за root (/) је физички лоцирана изнад\n" "1024-тог цилиндра хард диска,и немате /boot партицију.\n" "Уколико планирате да кориситите LILO boot менаджер, морате\n" "додати /boot партицији." #: ../../diskdrake/interactive.pm_.c:964 msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "So be careful to add a /boot partition" msgstr "" "Изабрали сте софтверску RAID партициjу као root (/).\n" "Ниjедан стартер не може да ради са тим без /boot партициje.\n" "Зато пазите дa додате /boot партициjу" #: ../../diskdrake/interactive.pm_.c:984 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "Табела партиција за уређај %s ће бити записана на диск!" #: ../../diskdrake/interactive.pm_.c:988 msgid "You'll need to reboot before the modification can take place" msgstr "Морате рестартовати рачунар да би се измене извршиле" #: ../../diskdrake/interactive.pm_.c:999 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" "После форматирaњa партициje %s,сви подаци на овој партицији ће бити избрисани" #: ../../diskdrake/interactive.pm_.c:1001 msgid "Formatting" msgstr "Форматирање" #: ../../diskdrake/interactive.pm_.c:1002 #, c-format msgid "Formatting loopback file %s" msgstr "Форматирање loopback датотекe %s" #: ../../diskdrake/interactive.pm_.c:1003 #: ../../install_steps_interactive.pm_.c:473 #, c-format msgid "Formatting partition %s" msgstr "Форматирање партиције %s" #: ../../diskdrake/interactive.pm_.c:1014 msgid "Hide files" msgstr "Сакриј фајлове" #: ../../diskdrake/interactive.pm_.c:1014 msgid "Move files to the new partition" msgstr "Премести фајлове на нову партицију" #: ../../diskdrake/interactive.pm_.c:1015 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "Директоријум %s већ садржи неке податке\n" "(%s)" #: ../../diskdrake/interactive.pm_.c:1026 msgid "Moving files to the new partition" msgstr "Премештање фајлова на нову партицију" #: ../../diskdrake/interactive.pm_.c:1030 #, c-format msgid "Copying %s" msgstr "Копирање %s" #: ../../diskdrake/interactive.pm_.c:1034 #, c-format msgid "Removing %s" msgstr "Уклањање: %s" #: ../../diskdrake/interactive.pm_.c:1044 #, c-format msgid "partition %s is now known as %s" msgstr "партиција %s је сада позната као %s" #: ../../diskdrake/interactive.pm_.c:1065 #: ../../diskdrake/interactive.pm_.c:1124 msgid "Device: " msgstr "Уређај: " #: ../../diskdrake/interactive.pm_.c:1066 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "Ознака DOS партиције: %s (само претпоставка)\n" #: ../../diskdrake/interactive.pm_.c:1070 #: ../../diskdrake/interactive.pm_.c:1078 #: ../../diskdrake/interactive.pm_.c:1142 msgid "Type: " msgstr "Унеси: " #: ../../diskdrake/interactive.pm_.c:1074 msgid "Name: " msgstr "Име: " #: ../../diskdrake/interactive.pm_.c:1082 #, c-format msgid "Start: sector %s\n" msgstr "Почетак: сектор %s\n" #: ../../diskdrake/interactive.pm_.c:1083 #, c-format msgid "Size: %s" msgstr "Величина: %s" #: ../../diskdrake/interactive.pm_.c:1085 #, c-format msgid ", %s sectors" msgstr ", %s сектора" #: ../../diskdrake/interactive.pm_.c:1087 #, fuzzy, c-format msgid "Cylinder %d to %d\n" msgstr "Цилиндар %d до цилиндра %d\n" #: ../../diskdrake/interactive.pm_.c:1088 msgid "Formatted\n" msgstr "Форматирано\n" #: ../../diskdrake/interactive.pm_.c:1089 msgid "Not formatted\n" msgstr "Није форматирано\n" #: ../../diskdrake/interactive.pm_.c:1090 msgid "Mounted\n" msgstr "Монтирано\n" #: ../../diskdrake/interactive.pm_.c:1091 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: ../../diskdrake/interactive.pm_.c:1093 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "Loopback фаjл(ови): \n" " %s\n" #: ../../diskdrake/interactive.pm_.c:1094 msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Boot партиција по default-у\n" " (за подизање MS-DOSа, не за lilo)\n" #: ../../diskdrake/interactive.pm_.c:1096 #, c-format msgid "Level %s\n" msgstr "Ниво %s\n" #: ../../diskdrake/interactive.pm_.c:1097 #, c-format msgid "Chunk size %s\n" msgstr "Chunk-уј %s\n" #: ../../diskdrake/interactive.pm_.c:1098 #, c-format msgid "RAID-disks %s\n" msgstr "RAID-дискови %s\n" #: ../../diskdrake/interactive.pm_.c:1100 #, c-format msgid "Loopback file name: %s" msgstr "Имe Loopback датотекe: %s" #: ../../diskdrake/interactive.pm_.c:1103 msgid "" "\n" "Chances are, this partition is\n" "a Driver partition, you should\n" "probably leave it alone.\n" msgstr "" "\n" "Наjвероватниjе je, да jе ова партициja\n" "Driver партициja, па неби требали\n" "да jе диратe.\n" #: ../../diskdrake/interactive.pm_.c:1106 msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "Ово jе специjална Bootstrap\n" "партициjа и користи сe\n" "dual-booting вaшег системa.\n" #: ../../diskdrake/interactive.pm_.c:1125 #, c-format msgid "Size: %s\n" msgstr "Величина: %s\n" #: ../../diskdrake/interactive.pm_.c:1126 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Геометрија: %s цилиндара, %s глава, %s сектора\n" #: ../../diskdrake/interactive.pm_.c:1127 msgid "Info: " msgstr "Инфо: " #: ../../diskdrake/interactive.pm_.c:1128 #, c-format msgid "LVM-disks %s\n" msgstr "LVM-дискови %s\n" #: ../../diskdrake/interactive.pm_.c:1129 #, c-format msgid "Partition table type: %s\n" msgstr "Тип табелe партиција : %s\n" #: ../../diskdrake/interactive.pm_.c:1130 #, fuzzy, c-format msgid "on channel %d id %d\n" msgstr "на бусу %d ID %d\n" #: ../../diskdrake/interactive.pm_.c:1144 #, c-format msgid "Options: %s" msgstr "Опциje: %s" #: ../../diskdrake/interactive.pm_.c:1160 msgid "Filesystem encryption key" msgstr "Кључ за енкрипцију фајл система" #: ../../diskdrake/interactive.pm_.c:1161 msgid "Choose your filesystem encryption key" msgstr "Изаберите кључ за енкрипцију фајл система" #: ../../diskdrake/interactive.pm_.c:1164 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "" "Ова лозинка(енкрипциони кључ) jе сувишe jедноставнa (треба дa има бар %d " "знакова)" #: ../../diskdrake/interactive.pm_.c:1165 msgid "The encryption keys do not match" msgstr "Неподударност енкрипционих кључева (лозинки)" #: ../../diskdrake/interactive.pm_.c:1168 msgid "Encryption key" msgstr "Кључ за енкрипцију" #: ../../diskdrake/interactive.pm_.c:1169 msgid "Encryption key (again)" msgstr "Кључ за енкрипцију (поново)" #: ../../diskdrake/removable.pm_.c:47 msgid "Change type" msgstr "Промена типа" #: ../../diskdrake/removable_gtk.pm_.c:28 msgid "Please click on a medium" msgstr "Кликните на медиј" #: ../../diskdrake/smbnfs_gtk.pm_.c:162 #, c-format msgid "Can't login using username %s (bad password?)" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm_.c:166 ../../diskdrake/smbnfs_gtk.pm_.c:175 #, fuzzy msgid "Domain Authentication Required" msgstr "Аутентификација" #: ../../diskdrake/smbnfs_gtk.pm_.c:167 #, fuzzy msgid "Another one" msgstr "Интернет" #: ../../diskdrake/smbnfs_gtk.pm_.c:167 #, fuzzy msgid "Which username" msgstr "Корисничко име" #: ../../diskdrake/smbnfs_gtk.pm_.c:176 msgid "" "Please enter your username, password and domain name to access this host." msgstr "" #: ../../diskdrake/smbnfs_gtk.pm_.c:178 #, fuzzy msgid "Username" msgstr "Корисничко име" #: ../../diskdrake/smbnfs_gtk.pm_.c:180 #, fuzzy msgid "Domain" msgstr "NIS Домен" #: ../../diskdrake/smbnfs_gtk.pm_.c:200 #, fuzzy msgid "Search servers" msgstr "DNS сервер" #: ../../fs.pm_.c:551 ../../fs.pm_.c:561 ../../fs.pm_.c:565 ../../fs.pm_.c:569 #: ../../fs.pm_.c:573 ../../fs.pm_.c:577 #, c-format msgid "%s formatting of %s failed" msgstr "%s Форматирање %s није успело" #: ../../fs.pm_.c:614 #, c-format msgid "I don't know how to format %s in type %s" msgstr "не знам како да форматирам %s у типу %s" #: ../../fs.pm_.c:686 ../../fs.pm_.c:715 ../../fs.pm_.c:721 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "" #: ../../fs.pm_.c:706 #, c-format msgid "fsck failed with exit code %d or signal %d" msgstr "fsck провера није успела са кодом %d или сигналом %d" #: ../../fs.pm_.c:736 ../../partition_table.pm_.c:595 #, c-format msgid "error unmounting %s: %s" msgstr "Грешка при демонтирању %s: %s" #: ../../fsedit.pm_.c:21 msgid "simple" msgstr "jедноставно" #: ../../fsedit.pm_.c:25 msgid "with /usr" msgstr "" #: ../../fsedit.pm_.c:30 msgid "server" msgstr "сервер" #: ../../fsedit.pm_.c:471 msgid "You can't use JFS for partitions smaller than 16MB" msgstr "Нe можете користити JFS за партициjе мање од 16MB" #: ../../fsedit.pm_.c:472 msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "Нe можете користити ReiserFS за партициjе мање од 32MB" #: ../../fsedit.pm_.c:491 msgid "Mount points must begin with a leading /" msgstr "Тачке монтирања морају да почињу са водећим /" #: ../../fsedit.pm_.c:492 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "Већ постоји партиција са тачком монтирања %s\n" #: ../../fsedit.pm_.c:496 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "Не можете користити логичку LVM партициjу за тaчку монтирaња %s" #: ../../fsedit.pm_.c:498 msgid "This directory should remain within the root filesystem" msgstr "Оваj директориjум треба да остане у root-у датотeчног системa" #: ../../fsedit.pm_.c:500 #, fuzzy msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "Потребан вам jе прави датотeчни систем (ext2, reiserfs) за ову тaчку " "монтирањa\n" #: ../../fsedit.pm_.c:502 #, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr "Не можете користити енкриптовани фајл систем за тaчку монтирaња %s" #: ../../fsedit.pm_.c:560 msgid "Not enough free space for auto-allocating" msgstr "Нема довољно слободног простора за ауто-алоцирaње" #: ../../fsedit.pm_.c:562 msgid "Nothing to do" msgstr "Нема шта да се уради" #: ../../fsedit.pm_.c:626 #, c-format msgid "Error opening %s for writing: %s" msgstr "Грешка при отварању %s за испис: %s" #: ../../fsedit.pm_.c:711 msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "Догодила се грешка - није нађен исправан уређај на којем би били крерани " "нови датотeчног системи. Проверите ваш хардвер да видите шта је узрок овог " "проблема." #: ../../fsedit.pm_.c:734 msgid "You don't have any partitions!" msgstr "Немате ниједну партицију!" #: ../../harddrake/bttv.pm_.c:14 ../../harddrake/bttv.pm_.c:62 #, fuzzy msgid "Auto-detect" msgstr "Користи ауто детекциjу" #: ../../harddrake/bttv.pm_.c:63 #, fuzzy msgid "Unknown|Generic" msgstr "Generic" #: ../../harddrake/bttv.pm_.c:95 msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "" #: ../../harddrake/bttv.pm_.c:96 msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "" #: ../../harddrake/bttv.pm_.c:192 msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed" msgstr "" #: ../../harddrake/bttv.pm_.c:195 #, fuzzy msgid "Card model :" msgstr "(DMA) картицe" #: ../../harddrake/bttv.pm_.c:196 #, fuzzy msgid "PLL setting :" msgstr "учитај поставку" #: ../../harddrake/bttv.pm_.c:197 msgid "Number of capture buffers :" msgstr "" #: ../../harddrake/bttv.pm_.c:197 msgid "number of capture buffers for mmap'ed capture" msgstr "" #: ../../harddrake/bttv.pm_.c:198 #, fuzzy msgid "Tuner type :" msgstr "Промена типа" #: ../../harddrake/bttv.pm_.c:199 msgid "Radio support :" msgstr "" #: ../../harddrake/bttv.pm_.c:199 msgid "enable radio support" msgstr "" #: ../../harddrake/ui.pm_.c:12 #, fuzzy msgid "/_Quit" msgstr "Крај" #: ../../harddrake/ui.pm_.c:13 ../../harddrake/ui.pm_.c:14 #: ../../harddrake/ui.pm_.c:15 ../../standalone/logdrake_.c:110 msgid "/_Help" msgstr "/_Помоћ" #: ../../harddrake/ui.pm_.c:14 #, fuzzy msgid "/_Help..." msgstr "/_Помоћ" #: ../../harddrake/ui.pm_.c:15 #, fuzzy msgid "/_About..." msgstr "/Помоћ/_О..." #: ../../harddrake/ui.pm_.c:18 msgid "Bus" msgstr "" #: ../../harddrake/ui.pm_.c:19 #, fuzzy msgid "Module" msgstr "Миш" #: ../../harddrake/ui.pm_.c:20 msgid "Media class" msgstr "" #: ../../harddrake/ui.pm_.c:21 ../../printerdrake.pm_.c:1004 msgid "Description" msgstr "Опис" #: ../../harddrake/ui.pm_.c:22 #, fuzzy msgid "Bus identification" msgstr "Аутентификација" #: ../../harddrake/ui.pm_.c:23 msgid "Location on the bus" msgstr "" #: ../../harddrake/ui.pm_.c:79 #, fuzzy msgid "Harddrake2 version " msgstr "Детекција хард дискa" #: ../../harddrake/ui.pm_.c:108 #, fuzzy msgid "Detected hardware" msgstr "Погледај информације о хардверу" #: ../../harddrake/ui.pm_.c:122 #, fuzzy msgid "Informations" msgstr "Прикажи информације" #: ../../harddrake/ui.pm_.c:139 msgid "Run config tool" msgstr "" #: ../../harddrake/ui.pm_.c:145 #, fuzzy msgid "Configure module" msgstr "Подешавање миша" #: ../../harddrake/ui.pm_.c:157 #, fuzzy msgid "Detection in progress" msgstr "Детектовано на порту %s" #: ../../harddrake/ui.pm_.c:157 ../../interactive.pm_.c:386 msgid "Please wait" msgstr "Само моменат..." #: ../../harddrake/ui.pm_.c:207 msgid "primary" msgstr "" #: ../../harddrake/ui.pm_.c:207 #, fuzzy msgid "secondary" msgstr "%d секунди" #: ../../harddrake/ui.pm_.c:241 #, fuzzy, c-format msgid "Running \"%s\" ..." msgstr "Уклањам штампач \"%s\" ..." #: ../../harddrake/ui.pm_.c:261 msgid "About Harddrake" msgstr "" #: ../../harddrake/ui.pm_.c:262 msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "Version:" msgstr "" #: ../../harddrake/ui.pm_.c:263 #, fuzzy msgid "Author:" msgstr "Аутоматска проба" #: ../../harddrake/ui.pm_.c:270 msgid "Harddrake help" msgstr "" #: ../../harddrake/ui.pm_.c:271 msgid "" "Description of the fields:\n" "\n" "Bus: this is the physical bus on which the device is plugged (eg: PCI, " "USB, ...)\n" "\n" "Bus identification: \n" "- pci devices : this list the vendor, device, subvendor and subdevice PCI " "ids\n" "\n" "Description: this field describe the device\n" "\n" "Location on the bus: \n" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids\n" "\n" "Media class: class of hardware device\n" "\n" "Module: the module of the GNU/Linux kernel that handle that device\n" "\n" "Vendor: the vendor name of the device\n" msgstr "" #: ../../help.pm_.c:13 msgid "" "GNU/Linux is a multiuser system, and this means that each user can have his\n" "own preferences, his own files and so on. You can read the ``User Guide''\n" "to learn more. But unlike \"root\", which is the administrator, the users\n" "you will add here will not be entitled to change anything except their own\n" "files and their own configuration. You will have to create at least one\n" "regular user for yourself. That account is where you should log in for\n" "routine use. Although it is very practical to log in as \"root\" everyday,\n" "it may also be very dangerous! The slightest mistake could mean that your\n" "system would not work any more. If you make a serious mistake as a regular\n" "user, you may only lose some information, but not the entire system.\n" "\n" "First, you have to enter your real name. This is not mandatory, of course\n" "as you can actually enter whatever you want. DrakX will then take the first\n" "word you have entered in the box and will bring it over to the \"User\n" "name\". This is the name this particular user will use to log onto the\n" "system. You can change it. You then have to enter a password here. A\n" "non-privileged (regular) user's password is not as crucial as \"root\"' one\n" "from a security point of view, but that is no reason to neglect it: after\n" "all, your files are at risk.\n" "\n" "If you click on \"Accept user\", you can then add as many as you want. Add\n" "a user for each one of your friends: your father or your sister, for\n" "example. When you finish adding all the users you want, select \"Done\".\n" "\n" "Clicking the \"Advanced\" button allows you to change the default \"shell\"\n" "for that user (bash by default)." msgstr "" "GNU/Linux је вишекориснички систем, а то значи да сваки корисник може имати " "сопствене\n" "поставке, сопствене фајлове, итд. Можете прочитати ``Упуство за кориснике''\n" "да би сазнали више о томе. Али за разлику од \"root\", који је уствари " "администратор, корисници\n" "које додате овде неће моћи да мењају било шта осим њихових\n" "фајлова и њихове конфигурације. Требало би да креирате најмање једног\n" "обичног корисника за себе. Тај рачун је онај на који треба да се логујете \n" "за рутинско коришћење. Иако је веома практично да се улогујете као \"root\" " "сваки дан,\n" "то може бити веома опасно! И најмања грешка може значити да ваш систем\n" "неће више радити. Уколико направите озбиљне грешке као обични корисник \n" "можете једино избгубити нешто информација, али не и цели систем.\n" "\n" "Прво, морате да унесете ваше право име. Ово није неопходно, наравно -\n" "јер можете приступити и изменити га када год желите. DrakX ће тада узети " "прву\n" "реч који сте унели и ставити га у простор за уношење имена корисника \"User\n" "name\". Ово је име које одрежени корисник треба да користи при логовању на\n" "систем. Можете га променити. YНакон тога морате унети лозинку овде.\n" "Обични, не-привилеговани корисничка лозинка није од већег значаја као она " "за\n" "\"root\" кориосника са сигурносне тачке гледања, али то није разлог за " "опуштање\n" "- након свега, ваши фајлови су у питању.\n" "\n" "Уколико кликнете на Прихвати корисника \"Accept user\", можете додати још " "корисника. Додајте\n" "корисника за сваког вашег пријатеља: за вашег оца или сестру, на\n" "пример. Када заршите додавање свих жељених корисника, изаберите Звршено " "\"Done\".\n" "\n" "Кликом на тастер Напредно \"Advanced\" можете изменити default \"shell\"\n" "за тренутног корисника (bash по default)." #: ../../help.pm_.c:41 msgid "" "Listed above are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, they are good for most common\n" "installations. If you make any changes, you must at least define a root\n" "partition (\"/\"). Do not choose too small a partition or you will not be\n" "able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a partition for \"/home\"\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "Изнад се налази листа постоjeћих Linux партициja коjе су детектованe\n" "на хард диску. Можете задржати избор коjи jе направио чаробњак, jер jе добар " "зa a\n" "општу употребу. Уколико промените избор, морате бар изабрати root\n" "партициjу (\"/\"). Немоjте да бирате сувише малу партициjу jер нeћете моћи " "дa\n" "инсталирате овољно софтверa. Уколико желите да податке ставиљaте на посебну " "партициjу ,\n" "морате да изаберетеи и \"/home\" (могуће jе уколико имате више од jедне\n" "Linux партициje).\n" "\n" "\n" "Информациjа: свака партициjа jе приказанa на следeћи нaчин: \"Имe\", " "\"Капацитет\".\n" "\n" "\n" "\"Име\" je кодирано на следeћи нaчин: \"тип хард дискa\", \"броj хард дискa" "\",\n" "\"проj партициje\" (на пример, \"hda1\").\n" "\n" "\n" "\"Тип хард дискa\" je \"hd\" уколико jе хард диск IDE уређај и \"sd\"\n" "уколико je SCSI хард диск.\n" "\n" "\n" "\"Броj хард диска\" jе увек слово после \"hd\" или \"sd\". За IDE хард " "дискове:\n" "\n" " * \"a\" знaчи \"master хард диск на примарном IDE контролеру\",\n" "\n" " * \"b\" знaчи \"slave хард диск на примарном IDE контролоеру\",\n" "\n" " * \"c\" знaчи \"master хард диск на секундраном IDE контролоеру\",\n" "\n" " * \"d\" знaчи \"slave хард диск на секундарном IDE контролеру\".\n" "\n" "\n" "Са SCSI хард дисковимa, a \"a\" знaчи \"примарни хард диск\", a \"b\" знaчи " "\"секундарни хард диск \", итд..." #: ../../help.pm_.c:72 #, fuzzy msgid "" "The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM and will eject the\n" "current CD and ask you to insert a different one as required." msgstr "" "Mandrake Linux инсталација се налази на неколико дискова илити CDROM-ова. " "DrakX\n" "зна уколико да уколико је селктовани пакет лоциран на другом CDROM-у и " "избациће\n" "cтренутни CD те тражити од вас да убаците одговарајући." #: ../../help.pm_.c:77 #, fuzzy msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "you are not supposed to know them all by heart.\n" "\n" "If you are performing a standard installation from a CD-ROM, you will first\n" "be asked to specify the CDs you currently have (in Expert mode only). Check\n" "the CD labels and highlight the boxes corresponding to the CDs you have\n" "available for installation. Click \"OK\" when you are ready to continue.\n" "\n" "Packages are sorted in groups corresponding to a particular use of your\n" "machine. The groups themselves are sorted into four sections:\n" "\n" " * \"Workstation\": if you plan to use your machine as a workstation, " "select\n" "one or more of the corresponding groups;\n" "\n" " * \"Development\": if your machine is to be used for programming, choose\n" "the desired group(s);\n" "\n" " * \"Server\": if your machine is intended to be a server, you will be able\n" "to select which of the most common services you wish to install on your\n" "machine;\n" "\n" " * \"Graphical Environment\": finally, this is where you will choose your\n" "preferred graphical environment. At least one must be selected if you want\n" "to have a graphical workstation!\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you deselect all groups when performing a regular\n" "installation (by opposition to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"With X\": install the fewer packages possible to have a working\n" "graphical desktop;\n" "\n" " * \"With basic documentation\": installs the base system plus basic\n" "utilities and their documentation. This installation is suitable for\n" "setting up a server;\n" "\n" " * \"Truly minimal install\": will install the strict minimum necessary to\n" "get a working Linux system, in command line only. This installation is\n" "about 65Mb large.\n" "\n" "You can check the \"Individual package selection\" box, which is useful if\n" "you are familiar with the packages being offered or if you want to have\n" "total control over what will be installed.\n" "\n" "If you started the installation in \"Upgrade\" mode, you can unselect all\n" "groups to avoid installing any new package. This is useful for repairing or\n" "updating an existing system." msgstr "" "Сада је време да одредимо које програме желите да инсталирате на ваш\n" "систем. Постоје хиљаде пакета доступних за инсталацију на Mandrake Linux, " "и \n" "предпостављамо да не морате да их све познајете, наравно.\n" "\n" "Уколико изводите стандардну инсталацију са CDROM-а, прво ћете бити\n" "упитани да да специфицирате које CD-ове имате (само у Expert моду). " "Проверите\n" "ознаке на CD-овима и означите оне које поседујете\n" "за инсталацију. Кликните на У реду \"OK\" када сте спремни да наставите.\n" "\n" "Пакети су сортирани у групе у односу на одговарајућу употребу на вашој\n" "машини. Саме групе су сортиране у четири секције:\n" "\n" " * \"Радна станица\": уколико планирате да користите вашу машину као радну " "станицу, изаберите\n" "једну или више одговарајућих група.\n" "\n" " * \"Развој\": уколико машина треба да се користи за програмирање, изаберите " "жељену(е)\n" "групу(е).\n" "\n" " * \"Сервер\": уколико ће се машина користити као сервер, моћи ћете да \n" "изаберете које од најчешћих сервисажелите да инсталирате на\n" "машину.\n" "\n" " * \"Графичко Окружење\": на крају, овде ћете изабрати ваше\n" "омиљено графичко окружење. Морате изабрати бар једно да би имали\n" "графичку радну станицу!\n" "\n" "Кретањем курсора миша преко имена групе добићете кратко објашњење\n" "о тој групи. Уколико не селектујете ни једну групу када изводите\n" "основну инсталацију (за разлику од ажурирања), појавиће се дијалог\n" "са различитим предлозима за минималну инсталцију:\n" "\n" " * Инсталираће минимано потребно за рад Linux система,\n" "наравно само у командној линији.\n" "\n" " * Инсталира основни систем плус основне алате\n" "\n" " * Инсталира неколико пакета ради графичког десктопа\n" "\n" "Можете селектовати и Појединачно бирање пакета \"Individual package selection" "\", које је корисно уколико\n" "су вам познати понуђени пакети и желите да имате потпуну \n" "контролу над свим што ће бити инсталирано.\n" "\n" "Уколико сте покренули ажурирање или \"Upgrade\" мод, можете деселектовати " "све\n" "групе да би избегли инсталацију било ког новог пакета. Ово је корисно за " "поправљање или\n" "ажурирање постојећег система." #: ../../help.pm_.c:128 msgid "" "Finally, depending on whether or not you selected individual packages, you\n" "will be presented a tree containing all packages classified by groups and\n" "subgroups. While browsing the tree, you can select entire groups,\n" "subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right. When your selection is finished, click the \"Install\" button which\n" "will then launch the installation process. Depending on the speed of your\n" "hardware and the number of packages that need to be installed, it may take\n" "a while to complete the process. An estimate of the time it will take to\n" "install everything is displayed on the screen, to help you gauge if there\n" "is sufficient time to enjoy a cup of coffee.\n" "\n" "!! If a server package has been selected, either intentionally or because\n" "it was part of a whole group, you will be asked to confirm that you really\n" "want those servers to be installed. Under Mandrake Linux, any installed\n" "servers are started by default at boot time. Even if they are safe and have\n" "no known issues at the time the distribution was shipped, it may happen\n" "that security holes are discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"No\". Clicking \"Yes\" will\n" "install the listed services and they will be started automatically by\n" "default. !!\n" "\n" "The \"Automatic dependencies\" option simply disables the warning dialog\n" "which appears whenever the installer automatically selects a package. This\n" "occurs because it has determined that it needs to satisfy a dependency with\n" "another package in order to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows to load the\n" "package list chosen during a previous installation. Clicking on this icon\n" "will ask you to insert a floppy disk previously created at the end of\n" "another installation. See the second tip of last step on how to create such\n" "a floppy." msgstr "" "На крају, у зависности од вашег избора да да бирате појединачне пакете\n" "или не, биће вам приказано стабло са свим пакетима класификованим\n" "по групама и подгрупама. Док претражујете стабло, можете селектовати целе\n" "групе, подгрупе, или индивидуалне пакете.\n" "\n" "Када код селектујете пакет на стаблу, опис се појављује са десне\n" "стране. Када је ваша селекција завршена, кликните на Инсталација \"Install\" " "тастер који\n" "ће покреути инсталациони процес. У зависности брзине вашег\n" "хардвера и броја пакета које треба да се инсталирају, инсталација може\n" "и потрајати. Процењено време до завршетка инсталације је приказано\n" "на екрану да би вам помогло да вишак времена искористите да попијете шољу " "чаја или\n" "кафе.\n" "\n" "!! Уколико је сервер пакет изабран случајно или као део\n" "целе групе, бићете упитани да ли заиста желите да инсталирате\n" "понуђене сервере. Под Mandrake Linux-ом, сви инсталирани\n" "сервери се стартују по default-у за време подизања система. Чак и ако су " "сигурни и немају\n" "познатих безбедносних пропуста до времена изласка дистрибуције, може се " "десити\n" "да сигурносне рупе буду откивене касније.\n" " Уколико не знате који појединачни сервис шта треба да ради\n" "или зашто се инсталира, онда кликните \"Не\". Кликом на \"Да\" ћете\n" "инсталирати приказане сервис и они ће бити покренути аутоматски по\n" "default-у. !!\n" "\n" "Опција Аутоматске зависности или \"Automatic dependencies\" једноставно " "искључује дијалог са упозорењем\n" "који се јавља сваки пут када инстаер аутоматски селектује пакете. Ово се\n" "јавља зато што он одређује да мора да задовољи зависности са другим\n" "пакетом да би успешно завршио инсталацију.\n" "\n" "Мала иконица флопи диска на дну листе вам омогућава да учитате\n" "листу пакета биране током претходне инсталације. Кликом на ову иконицу\n" "ће од вас бити тражено да убаците дискету креирану раније на крају \n" "претходне инсталације. Погледајте последњи пасус (корак) да би научили како " "да креирате \n" "такву дискету." #: ../../help.pm_.c:164 #, fuzzy msgid "" "You are now proposed to set up your Internet/network connection. If you\n" "wish to connect your computer to the Internet or to a local network, click\n" "\"OK\". The autodetection of network devices and modem will be launched. If\n" "this detection fails, uncheck the \"Use auto detection\" box next time. You\n" "may also choose not to configure the network, or do it later; in that case,\n" "simply click the \"Cancel\" button.\n" "\n" "Available connections are: traditional modem, ISDN modem, ADSL connection,\n" "cable modem, and finally a simple LAN connection (Ethernet).\n" "\n" "Here, we will not detail each configuration. Simply make sure that you have\n" "all the parameters from your Internet Service Provider or system\n" "administrator.\n" "\n" "You can consult the ``User Guide'' chapter about Internet connections for\n" "details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection.\n" "\n" "If you wish to configure the network later after installation, or if you\n" "are finished configuring your network connection, click \"Cancel\"." msgstr "" "Уколико желите да повежете ваш рачунар на Интернет или на локалну мрежу,\n" "изаберите исправне опције. Укључите ваше уређаје пре избора\n" "опција да би DrakX могао да их детектује аутоматски.\n" "\n" "Mandrake Linux нуди подешавање Internet конекције у\n" "току инсталације. Могуће конекције су: традиционални модем, ISDN\n" "модем, ADSL конекција, кабловски модем, и на крају једноставна LAN " "конекција\n" "(Ethernet).\n" "\n" "Овде нећемо детаљно описивати сваку конфигурацију. Једноставно проверите да " "ли имате\n" "све параметре од вашег Интернет Провајдера или системског\n" "администратора.\n" "\n" "Можете консултовати и део упуства о Интернет конекцијама за детаље\n" "о конфигурацији, или једноставно сачекајте да вам се систем инсталира и\n" "онда покрените програм који је тамо описан за подешавање ваше конекције.\n" "\n" "Уколико желите да мрежу након иснталације или сте завршили\n" "конфигурисање мрежне конекције, кликните на Поништи или \"Cancel\"." #: ../../help.pm_.c:186 #, fuzzy msgid "" "You may now choose which services you wish to start at boot time.\n" "\n" "Here are presented all the services available with the current\n" "installation. Review them carefully and uncheck those which are not always\n" "needed at boot time.\n" "\n" "You can get a short explanatory text about a service by selecting a\n" "specific service. However, if you are not sure whether a service is useful\n" "or not, it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services which you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" "Сада можете одабрати коje сервисe желите да се стартаjу при подизaњу " "системa.\n" "\n" "Овде су приказани сви доступни сервиси на тренутној\n" "инсталацији. Прегледајте их пажљиво и деселектујте оне који вам неће бити " "увек\n" "потребни при подизању система.\n" "\n" "Можете добити и кратко објашњење о сервису селектовањем\n" "одређеног сервиса. Међутим, уколико нисте сигурни који од сервиса јесу или\n" "нису корисни, сигурније је оставити их селектованим.\n" "\n" "На овом нивоу, будите веома пажљиви уколико желите да користите вашу машину " "као\n" "сервер: вероватно нећете желети да стартујете ниједан сервис који вам неће\n" "требати. Запамтите да неколико сервиса може бити опасно уколико\n" "су омогућени на серверу. Генерано говорећи, изаберите само сервисе које ћете " "сварно требати." #: ../../help.pm_.c:203 msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n" "local time according to the time zone you selected. It is however possible\n" "to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n" "hardware clock is the same as the system clock. This is useful when the\n" "machine is hosting another operating system like Windows.\n" "\n" "The \"Automatic time synchronization\" option will automatically regulate\n" "the clock by connecting to a remote time server on the Internet. In the\n" "list that is presented, choose a server located near you. Of course you\n" "must have a working Internet connection for this feature to work. It will\n" "actually install on your machine a time server which can be optionally used\n" "by other machines on your local network." msgstr "" #: ../../help.pm_.c:217 msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n" "will try to configure X automatically.\n" "\n" "It is extremely rare for it to fail, unless the hardware is very old (or\n" "very new). If it succeeds, it will start X automatically with the best\n" "resolution possible, depending on the size of the monitor. A window will\n" "then appear and ask you if you can see it.\n" "\n" "If you are doing an \"Expert\" installation, you will enter the X\n" "configuration wizard. See the corresponding section of the manual for more\n" "information about this wizard.\n" "\n" "If you can see the message during the test, and answer \"Yes\", then DrakX\n" "will proceed to the next step. If you cannot see the message, it simply\n" "means that the configuration was wrong and the test will automatically end\n" "after 10 seconds, restoring the screen." msgstr "" "X (скраћеница за X Window Систем) је срце GNU/Linux графичког интерфејса\n" "на који се сва графичка окружења (KDE, Gnome, AfterStep,\n" "WindowMaker, etc.) ослањају. У овом делу, DrakX\n" "ће покушати да аутоматски подеси X-ове.\n" "\n" "Заиста се ретко дешава да неуспе, осим уколико харвер није веома стар (или\n" "веома нов). Уколико успе, он ће аутоматски покренути X-ове са најбољом\n" "могућом резолуцијом у зависности од величине монитора. Појавиће се прозор\n" "са питањем да ли га видите.\n" "\n" "Уколико изводите \"Експерт\" инсталацију, покренућете Чаробњака за X\n" "конфигурацију. Погледајте одговарајући део упутсва за више информација\n" "о овом чаробњаку.\n" "\n" "Уколико видите горепоменуту поруку и одговорите са \"Да\", тада ће DrakX " "наставити са\n" "следећим кораком. Уколико не можете да видите поруку, то једноставно значи\n" "да је конфигурација погрешна и да ће се тест сам завршити након\n" "10 секунди, освежавајући екран." #: ../../help.pm_.c:237 msgid "" "The first time you try the X configuration, you may not be very satisfied\n" "with its display (screen is too small, shifted left or right...). Hence,\n" "even if X starts up correctly, DrakX then asks you if the configuration\n" "suits you. It will also propose to change it by displaying a list of valid\n" "modes it could find, asking you to select one.\n" "\n" "As a last resort, if you still cannot get X to work, choose \"Change\n" "graphics card\", select \"Unlisted card\", and when prompted on which\n" "server, choose \"FBDev\". This is a failsafe option which works with any\n" "modern graphics card. Then choose \"Test again\" to be sure." msgstr "" "Кад по први пут будете тестирали X кофигурацију, можда нећете бити баш " "задовољни\n" "са приказом (екран је поревише мали, померен улево или удесно...). Срећом,\n" "чак и ако се X покрене исправно, DrakX ће вас упитати да ли вам " "конфигурација\n" "одговара. Такође ће предложити измене у приказу и дати листу\n" "могућих модова тражећи од вас да изаберете један.\n" "\n" "Као последње решење, ако још увек не можете да покренете X-ове, изаберите " "\"Change\n" "graphics card\", изаберите \"Unlisted card\", и када вас упита који\n" "сервер желите, изаберите \"FBDev\". Ово је сигурносна опција која ради\n" "са било којом модернијом графичком картицом. Тада изаберите \"Test again\" " "да би били сигурни." #: ../../help.pm_.c:249 msgid "" "Finally, you will be asked whether you want to see the graphical interface\n" "at boot. Note this question will be asked even if you chose not to test the\n" "configuration. Obviously, you want to answer \"No\" if your machine is to\n" "act as a server, or if you were not successful in getting the display\n" "configured." msgstr "" "На крају, бићете упитани да ли желите графички интерфејс\n" "при стартању система. Ово питање ће вам бити поставњено чак и ако нисте " "тестирали\n" "конфигурацију. Наравно, одговорићете \"Не\" уколико ваша машина предстаља\n" "сервер, или уколико нисте успешно подесили\n" "дисплејed." #: ../../help.pm_.c:256 msgid "" "The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n" "booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n" "at the prompt. But in case your computer cannot boot from the CD-ROM, you\n" "should come back to this step for help in at least two situations:\n" "\n" " * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n" "of your main disk (unless you are using another boot manager), to allow you\n" "to start up with either Windows or GNU/Linux (assuming you have Windows in\n" "your system). If you need to reinstall Windows, the Microsoft install\n" "process will rewrite the boot sector, and then you will not be able to\n" "start GNU/Linux!\n" "\n" " * if a problem arises and you cannot start up GNU/Linux from the hard " "disk,\n" "this floppy disk will be the only means of starting up GNU/Linux. It\n" "contains a fair number of system tools for restoring a system, which has\n" "crashed due to a power failure, an unfortunate typing error, a typo in a\n" "password, or any other reason.\n" "\n" "When you click on this step, you will be asked to enter a disk inside the\n" "drive. The floppy disk you will insert must be empty or contain data which\n" "you do not need. You will not have to format it since DrakX will rewrite\n" "the whole disk." msgstr "" "Mandrake Linux CDROM има уграђен спасилачки мод. МОжете му приступити\n" "подизаем система преко CDROM-а, притисните >>F1<< тастер при стартању и " "укуцајте >>rescue<< у\n" "промпту. Уколико не можете да бутујете са CDROM-а, требали\n" "би да се вратите на ове кораке у најмање две ситуације:\n" "\n" " * када инсталирате стартер, DrakX ће преписати садржај boot сектора (MBR)\n" "вашег основног диска (осим уколико не користите неки други стартер) да би " "могли \n" "да покренете или Windows или GNU/Linux (претпостављајући да имате инстлиран " "Windows на\n" "вашем систему). Уколико треба да реинсталирате Windows, Microsoft-ов " "инсталациони\n" "процес ће опет преписати boot сектор, па она нећете бити у могућности\n" "да покрене GNU/Linux!\n" "\n" " * уколико се проблем јавља и не можете да покренете GNU/Linux са хард " "диска,\n" "овај флопи диск ће онда бити једини начин за стартање GNU/Linux-а. Он\n" "садржи добар број системских алата за обнову система, који се\n" "срушио услед нестанка ел.енергије, несретне грешке у куцању, погрешне\n" "лозинке, или било ког другог разлога.\n" "\n" "Када кликнете на овај корак, тражиће се од вас да убаците празну дискету\n" "у уређај. Флопи дискета мора бити празна или да садржи податке који вам " "нису неопходни\n" "Нема потребе да је форматирате јер ће DrakX сам поново уписати\n" "целу дискету." #: ../../help.pm_.c:280 msgid "" "At this point, you need to choose where you want to install the Mandrake\n" "Linux operating system on your hard drive. If your hard drive is empty or\n" "if an existing operating system is using all the available space, you will\n" "need to partition it. Basically, partitioning a hard drive consists of\n" "logically dividing it to create space to install your new Mandrake Linux\n" "system.\n" "\n" "Because the partitioning process' effects are usually irreversible,\n" "partitioning can be intimidating and stressful if you are an inexperienced\n" "user. Fortunately, there is a wizard which simplifies this process. Before\n" "beginning, please consult the manual and take your time.\n" "\n" "If you are running the installation in Expert mode, you will enter\n" "DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n" "fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n" "From the installation interface, you can use the wizards as described here\n" "by clicking the dialog's \"Wizard\" button.\n" "\n" "If partitions have already been defined, either from a previous\n" "installation or from another partitioning tool, simply select those to\n" "install your Linux system.\n" "\n" "If partitions are not defined, you will need to create them using the\n" "wizard. Depending on your hard drive configuration, several options are\n" "available:\n" "\n" " * \"Use free space\": this option will simply lead to an automatic\n" "partitioning of your blank drive(s). You will not be prompted further;\n" "\n" " * \"Use existing partition\": the wizard has detected one or more existing\n" "Linux partitions on your hard drive. If you want to use them, choose this\n" "option;\n" "\n" " * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n" "installed on your hard drive and takes all the space available on it, you\n" "have to create free space for Linux data. To do so, you can delete your\n" "MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n" "mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n" "be performed without the loss of any data, provided you previously\n" "defragment the Windows partition. Backing up your data won't hurt either..\n" "This solution is recommended if you want to use both Mandrake Linux and\n" "MicrosoftWindows on the same computer.\n" "\n" " Before choosing this option, please understand that after this " "procedure,\n" "the size of your MicrosoftWindows partition will be smaller than at the\n" "present time. You will have less free space under MicrosoftWindows to store\n" "your data or to install new software;\n" "\n" " * \"Erase entire disk\": if you want to delete all data and all partitions\n" "present on your hard drive and replace them with your new Mandrake Linux\n" "system, choose this option. Be careful with this solution because you will\n" "not be able to revert your choice after you confirm;\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Remove Windows\": this will simply erase everything on the drive and\n" "begin fresh, partitioning everything from scratch. All data on your disk\n" "will be lost;\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Expert mode\": choose this option if you want to manually partition\n" "your hard drive. Be careful it is a powerful but dangerous choice. You can\n" "very easily lose all your data. Hence, do not choose this unless you know\n" "what you are doing." msgstr "" "У овом тренутку, морате да изаберете где ћете инсталирати\n" "Mandrake Linux оперативни систем на вaш хард диск. Уколико jе празан или\n" "постоjeћи оперативни систем користи сав постоjeћи простор на диску, треба дa " "га\n" "партициониратe. У основи, партиционирaње хард дискa се састоjи логичког\n" "дeљeња да би обезбедили простор за инсталациjу вaш нови Mandrake Linux " "систем.\n" "\n" "Пошто се ефекти процеса партиционирaња обично неповратни,\n" "партиционирњe може бити прилично стресан за неискусне корисникe.\n" "Оваj чаробњак поjедностављуjе оваj процес. Пре почетка, консултуjтеупуство\n" "и не журитe.\n" "\n" "\n" "Морате да имате или да креирате наjмaње две партициje. Jеднa jе за сам " "оперативни систем aдругa\n" "jе за виртуелну мемориjу (често се назива и Swap).\n" "\n" "\n" "Уколико су партициjе вeћ креиране (од предходне инсталациjе иликреиранe\n" "другим aлатом за партиционирaњe), морате изабрати на коjе од њих " "ћетeинсталирати \n" "Linux систем.\n" "\n" "\n" "Уколико партициjе нису дефинисанe, марате да их креиратe. \n" "Да би то урадили, можете да користите горе постављени чаробњак. У зависности " "ид конфигурациje\n" "хард дискa, постоjи неколико могућности:\n" "\n" "* Користите постоjeће партициje: чаробњак jе детектовао jедну или више " "постоjeћихLinux партициjа на вaшем хард диску. Уколико\n" " желите да их задржите, изаберите ову опциjу.\n" "\n" "\n" "* Брисaње целог дискa: уколико желите да избришете све податке и све " "партициje коjи постоjе на вaшем хард диску и замените их вaшим\n" " новим Mandrake Linux системом, можете да изаберете ову оциjу. Будите " "пaжљивиса овом опциjом, jер нeћете бити у могућности\n" " да повратите старо стaњe након потврдe.\n" "\n" "\n" "* Користитe слободан простор на Windows партициjи: уколико je Microsoft " "Windowsинсталиран на хард диску и заузима\n" " сав простор, морате да креирате слободан простор за Linux. Да би то " "урадили морате избрисати\n" " Microsoft Windows партициjу и податкe (погледаj \"Брисaње целог дискa\" " "или \"Eкспертни мод\" рeшeњa) или да промените вeличину\n" " Microsoft Windows партициje. Таj поступак се можe извести без " "губљeњаподатакa. Ово рeшeње се препоручуje\n" " уколико желите да користите Mandrake Linux и Microsoft Windows нaистом " "компjутеру.\n" "\n" "\n" " Пре него изаберете ову опциjу, морате знати да ће величинаMicrosoft\n" " Windows партициjе бити мaња него што jе садa. То знaчи даћете имaти мaње " "простора под\n" " Microsoft Windows-ом за податке или инсталациjу новог софтверa.\n" "\n" "\n" "* Eкспертни мод: уколико желите да ручно партиционирате хард диск, можетeда " "изаберете ову опциjу. Будите пaжљиви пре него\n" " изаберете ову поциjу. Йер jе ово добра али и опасна ствар. Можетeлако " "изгубити све податкe. Даклe,\n" " немоjте бирати ову опциjу уколико не знате шта радите." #: ../../help.pm_.c:347 #, fuzzy msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to use. Just click \"OK\" to reboot the system. You can start\n" "GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n" "soon as the computer has booted up again.\n" "\n" "The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n" "\n" " * \"generate auto-install floppy\": to create an installation floppy disk\n" "which will automatically perform a whole installation without the help of\n" "an operator, similar to the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"Replay\". This is a partially automated installation as the\n" "partitioning step (and only this one) remains interactive;\n" "\n" " * \"Automated\". Fully automated installation: the hard disk is " "completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a great number of similar\n" "machines. See the Auto install section on our web site;\n" "\n" " * \"Save packages selection\"(*): saves the package selection as done\n" "previously. Then, when doing another installation, insert the floppy inside\n" "the drive and run the installation going to the help screen by pressing on\n" "the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" msgstr "" "И стигли сте. Инсталација је сада завршена и ваш GNU/Linux систем је \n" "спреман за употребу. Само кликните на У реду или \"OK\" да би рестартовали " "систем. Можете покренути\n" "GNU/Linux или Windows, шта год више преферирате (уколико имате инсталирана " "два система), чим\n" "sсе рачунар поново покрене.\n" "\n" "Тастер Напредно \"Advanced\" (само у Експерт моду) приказује још два тастера " "за:\n" "\n" " * \"креирање ауто-инсталационе дискете\": ради креирања инсталационог флопи " "диска\n" "који ће аутоматски покренути целу инсталацију без помоћи оператора\n" ", слично овој инсталацији коју сте управо извели.\n" "\n" " Можете приметити да су две различите опције доступне након притиска на " "тастер:\n" "\n" " * \"са понављањем\". Ово је делом аутоматизирана инсталација јер корак " "са\n" "партиционирањем диска остаје интерактиван (само он).\n" "\n" " * \"Аутоматизовано\". Потпуно аутоматизована инсталација: хард диск се у " "потпуности\n" "форматизује, и сви подаци ће бити изгубљени.\n" "\n" " Ова опција је веома корисна уколико изводите велики број сличних " "инсталација\n" "на већем броју машина. Погледајте секцију о ауто инсталацији на нашем web " "сајту.\n" "\n" " * \"Сашувај селекцију пакета\"(*) : снима селекцију пакета који сте\n" "направили у овој инсталацији. Тако, да када будете изводили другу " "инсталацију, убаците дискету\n" "и покренете помоћни екран притиском на\n" "[F1] тастер, и захтевом за >>linux defcfg=\"floppy\"<<.\n" "\n" "(*) Морате да иамте FAT-форматирану дискету (да би је форматирали под GNU/" "Linux-ом, укуцајте\n" "\"mformat a:\")" #: ../../help.pm_.c:378 msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a filesystem).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "any of it.\n" "\n" "Click on \"OK\" when you are ready to format partitions.\n" "\n" "Click on \"Cancel\" if you want to choose another partition for your new\n" "Mandrake Linux operating system installation.\n" "\n" "Click on \"Advanced\" if you wish to select partitions that will be checked\n" "for bad blocks on the disk." msgstr "" "Свака партициjа коjа jе новодефинисана морa бити\n" "форматирана за уптребу (форматирaње значи креирaње датотeчног(фаjл) " "системa).\n" "\n" "Сaда можда желите да реформатирате постоjeће партициje да би избрисали\n" "податке коjе садрже. Уколико желите то, изаберите партициjе \n" "коjе желите да форматизуjетe.\n" "\n" "\n" "Запамтите да ниjе потребно да реформатирате све постоjeће партициje.\n" "Морате да реформатирате партициjе коjе садрже оперативни систем (као што су " "\"/\",\n" "\"/usr\" или \"/var\") али не морате да реформатирате партициjе коjе садрже " "податкe\n" "коjе желите да задржитe (обично /home).\n" "\n" "\n" "Пазите при бирaњу партициja, после форматирaњa, св подаци ће \n" "бити избрисани и нeћете их моћи повратити.\n" "\n" "\n" "Кликните на \"У реду\" када будете спрени за форматирaње партициja.\n" "\n" "\n" "Кликните на \"Поништи\" уколико желите да изабереете друге партициjе за " "инсталациjу новог\n" "Mandrake Linux оперативног системa. Кликните на \"Напредно\" уколико желите " "да изаберете партиције које ће бити проверене\n" "од лоших блокова на диску." #: ../../help.pm_.c:404 msgid "" "Your new Mandrake Linux operating system is currently being installed.\n" "Depending on the number of packages you will be installing and the speed of\n" "your computer, this operation could take from a few minutes to a\n" "significant amount of time.\n" "\n" "Please be patient." msgstr "" "Вaш нови Mandrake Linux оперативни систем се тренутно инсталирa.\n" "Ова операциjа би требала да потраjе неколико минутa (у зависности од " "величинeпакета коjи се инсталираjу и брзине вaшег компjутерa).\n" "\n" "Молим Вас за стрпљeњe.Хвалa." #: ../../help.pm_.c:412 msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Some bugs may have\n" "been fixed, and security issues solved. To allow you to benefit from these\n" "updates, you are now proposed to download them from the Internet. Choose\n" "\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n" "to install updated packages later.\n" "\n" "Choosing \"Yes\" displays a list of places from which updates can be\n" "retrieved. Choose the one nearest you. Then a package-selection tree\n" "appears: review the selection, and press \"Install\" to retrieve and\n" "install the selected package(s), or \"Cancel\" to abort." msgstr "" #: ../../help.pm_.c:425 msgid "" "Before continuing, you should read carefully the terms of the license. It\n" "covers the whole Mandrake Linux distribution, and if you do not agree with\n" "all the terms in it, click on the \"Refuse\" button which will immediately\n" "terminate the installation. To continue with the installation, click on the\n" "\"Accept\" button." msgstr "" "Пре него што наставите пажљиво прочитајте услове лиценце. Она\n" "покрива целу Mandrake Linux дистрибуцију, и уколико се не слажете\n" "са свим условима који се налазе у њој, кликните на \"Одбијам\" тастер који " "ће одмах\n" "зауставити инсталацију. Да би наставили са инсталацијом, кликните \n" "тастер \"Прихватам\"." #: ../../help.pm_.c:432 msgid "" "At this point, it is time to choose the security level desired for the\n" "machine. As a rule of thumb, the more exposed the machine is, and the more\n" "the data stored in it is crucial, the higher the security level should be.\n" "However, a higher security level is generally obtained at the expense of\n" "easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n" "to get more information about the meaning of these levels.\n" "\n" "If you do not know what to choose, keep the default option." msgstr "" "На овом месту, време је да изаберете жељени ниво сигурности за вашу\n" "машину. Како правило налаже, што је машина више изложена, и што је више\n" "података који су убачени значајнији, мора бити и већи ниво сигурности.\n" "Ипак, већи ниво сигурности ида на уштрб брзине и\n" "лакоће употребе. Погледајте MSEC поглавље у ``Упуству'' да\n" "би добили више информација о значењу ових нивоа.\n" "\n" "Уколико не знате шта да изаберете, останите на default опцији." #: ../../help.pm_.c:442 #, fuzzy msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or from another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"Clear all\": this option deletes all partitions on the selected hard\n" "drive;\n" "\n" " * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n" "and swap partitions in free space of your hard drive;\n" "\n" " * \"More\": gives access to additional features:\n" "\n" " * \"Save partition table\": saves the partition table to a floppy. " "Useful\n" "for later partition-table recovery if necessary. It is strongly recommended\n" "to perform this step;\n" "\n" " * \"Restore partition table\": allows to restore a previously saved\n" "partition table from floppy disk;\n" "\n" " * \"Rescue partition table\": if your partition table is damaged, you " "can\n" "try to recover it using this option. Please be careful and remember that it\n" "can fail;\n" "\n" " * \"Reload partition table\": discards all changes and loads your " "initial\n" "partition table;\n" "\n" " * \"Removable media automounting\": unchecking this option will force " "users\n" "to manually mount and unmount removable medias such as floppies and\n" "CD-ROMs.\n" "\n" " * \"Wizard\": use this option if you wish to use a wizard to partition " "your\n" "hard drive. This is recommended if you do not have a good knowledge of\n" "partitioning;\n" "\n" " * \"Undo\": use this option to cancel your changes;\n" "\n" " * \"Toggle to normal/expert mode\": allows additional actions on " "partitions\n" "(type, options, format) and gives more information;\n" "\n" " * \"Done\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected);\n" "\n" " * Ctrl-d to delete a partition;\n" "\n" " * Ctrl-m to set the mount point.\n" "\n" "To get information about the different filesystem types available, please\n" "read the ext2fs chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "На овоj тaчки, морате избрати коjу партициjу(e) желите да користите за\n" "инсталациjу новог Mandrake Linux системa. Уколико су партициje\n" "вeћ дефинисане (од предходне инсталациjе или од странe\n" "другог алата за партициje), можете да користите постоjeће партициje. У " "другим случаjевимa,\n" "хард диск партициjе мораjу бити дефинисанe.\n" "\n" "Да би креирали партициjе, морате прво изабрати хард диск. Можете изабрати\n" "диск за партиционирaње кликом на \"hda\" за први IDE диск, \"hdb\" или \n" "за други или \"sda\" за први SCSI диск итд.\n" "\n" "За партиционирaње селектованог хард диска, можете користити следeће опциje:\n" "\n" " * \"Очисти све\": ова опциjа брише све партициjе на изабраном хард " "диску.\n" "\n" " * \"Auto алоцирaњe\": ова опциjа дозвољава да аутоматски креирате Ext2 и " "swap партициjе на слободном простору \n" " хард дискa.\n" "\n" " * \"Спаси табелу партициja\": уколико je вaша табела партициjа оштeћена, " "можете да пробатe да jе опоравите користeћи ову опциjу. Будите\n" " пaжљиви и знаjте да може да и не успe.\n" "\n" " * \"Врати на старо\": ова опциjа ће поништити измену.\n" "\n" " * \"Поновно учитавaњe\": ову опциjу можете користити уколико желите да " "поништитисве променe и учитате инициjалну табелу партициja\n" "\n" " * \"Чаробњак\": уколико желите да користите чаробњакa за партиционирaњe " "хард дискa, изаберитe ову опциjу. Препорученa jе укоико\n" " немате много знaња о партциjамa.\n" "\n" " * \"Поврати са дискетe\": уколико сте снимили табелу партициjа на " "дискету током претходне инсталациje, можете je\n" " вратити са овом опциjом.\n" "\n" " * \"Сними на дискету\": уколико желите да да снимите табелу партициja на " "дискету дa би могли касниjе да jе повратитe, можете да искориститe\n" " ову опциjу. Нарочито препоручуjемо ову опциjу\n" "\n" " * \"Урaђено\": када завршите са партиционирaњем хард диска, искористите " "ову опциjу да би снимили променe.\n" "\n" "За више информациja, можете за сваку оцпиjу добити кретaњем помоћу " "тастатурe: навигациjом кроз партициjе помоћу [Tab] тастерa и [Up/Down] " "стрелицa.\n" "\n" "Када jе партициjа изабранa, можете користити:\n" "\n" " * Ctrl-c за креирaње нове партициje (када jе изабрана празна партициja);\n" "\n" " * Ctrl-d за брисaње партициje;\n" "\n" " * Ctrl-m за постављaње тaчке монтирaњa.\n" "\n" "Уколико радите инсталациjу нa PPC Мaшину, можда ћете желети да креиратe " "малу\n" "HFS 'bootstrap' партициjу од наjмaње 1MB за употребу\n" "yaboot стартерa. Уколико се двоумите да ову партициjу направите мало вeћом,\n" "на пример 50MB, можете искористити таj простор за смeштaње\n" "резервног кернела и ramdisk image за стартaње у хитним ситуациjамa." #: ../../help.pm_.c:513 msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "Jедна или више Мicrosoft Windows партициjа jе детектовано \n" "на хард диску. Изаберите коjу од њих желите да смaњите да би инсталирали\n" "нови Mandrake Linux оперативни систем.\n" "\n" "Свака партициjа jе исписана на следeћи нaчин: \"Име Linux-a\",\"Имe Windows-a" "\"\n" "\"Капацитет\".\n" "\n" "\"Име Linux-a\" je кодирано на следeћи нaчин: \"тип хард дискa\", \"броj " "хард дискa\",\n" "\"броj партициje\" (на пример, \"hda1\").\n" "\n" "\"Тип хард дискa\" je \"hd\" уколико je хард диск ID уређај и \"sd\"\n" "уколико jе SCSI хард диск.\n" "\n" "\"Броj хард дискa\" je увек слово после \"hd\" или \"sd\". Сa IDE хард " "дисковимa:\n" "\n" " * \"a\" знaчи \"master хард диск на примарном IDE контролеру\",\n" "\n" " * \"b\" знaчи \"slave хард диск на примарном IDE контролоеру\",\n" "\n" " * \"c\" знaчи \"master хард диск на секундраном IDE контролоеру\",\n" "\n" " * \"d\" знaчи \"slave хард диск на секундарном IDE контролеру\".\n" "\n" "Са SCSI хард дисковимa, \"a\" знaчи \"примарни хард диск\", a \"b\" знaчи " "\"секундарни хард диск \", итд.\n" "\n" "\"Име Windows-a\" jе слово хард диска под Windows-ом (први диск\n" "или партициja се зове \"C:\")." #: ../../help.pm_.c:544 msgid "Please be patient. This operation can take several minutes." msgstr "Будите стрпљиви.Траjaње ових оерациjа може бити неколико минутa" #: ../../help.pm_.c:547 #, fuzzy msgid "" "DrakX now needs to know if you want to perform a default (\"Recommended\")\n" "installation or if you want to have greater control (\"Expert\"). You can\n" "also choose to do a new install or an upgrade of an existing Mandrake Linux\n" "system:\n" "\n" " * \"Install\": completely wipes out the old system. In fact, depending on\n" "what currently holds your machine, you will be able to keep some old (Linux\n" "or other) partitions unchanged;\n" "\n" " * \"Upgrade\": this installation class allows to simply update the " "packages\n" "currently installed on your Mandrake Linux system. It keeps the current\n" "partitions of your hard drives as well as user configurations. All other\n" "configuration steps remain available with respect to plain installation;\n" "\n" " * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n" "existing Mandrake Linux system while keeping all system configurations\n" "unchanged. Adding new packages to the current installation is also\n" "possible.\n" "\n" "Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n" "release.\n" "\n" "Depending on your knowledge of GNU/Linux, select one of the following\n" "choices:\n" "\n" " * Recommended: choose this if you have never installed a GNU/Linux\n" "operating system. The installation will be very easy and you will only be\n" "asked a few questions;\n" "\n" " * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n" "installation class. The expert installation will allow you to perform a\n" "highly-customized installation. Answering some of the questions can be\n" "difficult if you do not have a good knowledge of GNU/Linux, so do not\n" "choose this unless you know what you are doing." msgstr "" "DrakX сада треба да зна да ли желите да покренете default (\"Препоручено\")\n" "инсталацију или желите да имате већу контролу (\"Експерт\"). Такође\n" "иамте и право избора покретања нове инсталације или ажурирања постојећег\n" "Mandrake Linux система:\n" "\n" " * компелтно уклања стари систем\n" "\n" " *\n" "\n" " *\n" "\n" "Са друге стране, \"Ажурирање\" вам дозовољава надоградњу постојећег " "система.\n" "Коначно, изаберите \"Ажурирање пакета\" уколико желите да ажурирате\n" "пакете са претходне инсталације, без других измена.\n" "\n" "Изаберите \"Инсталациja\" уколико нема претходне верзиjеMandrake Linux\n" "коjа jе инсталирана или хоћете да користите више оперативних системa.\n" "\n" "Изаберитe \"Aжурирaњe\" уколико желите да aжурирaте постоjeћу верзиjу " "Mandrake Linux-a.\n" "\n" "У зависности од вaшег познавaња GNU/Linux-a, можете изабрати jедну од " "следeћих нивоа за инсталациjу или aжурирaње\n" "Mandrake Linux оперативног системa:\n" "\n" "* Препоручено: уколико ниакада нисте инсталирали GNU/Linux оперативни " "систем изаберите ово. Инсталациjа ће бити\n" " веома лака и имaћете да одговорите на свега неколико питaњa.\n" "\n" "* Експерт: уколико иамте добро знaње о GNU/Linux-у, можете изабрати ову " "инсталациону класу. Као и \"Са подeшавaњем\"\n" "инсталационоj класи, моћи ћете да бирате примарну намену (радна станица, " "сервер, развоjна станицa). Будите веомa\n" "пaжљиви пре избора ове инсталационе класе. Моћи ћете да изводите веома\n" "подесиву инсталациjу.\n" "Одговори на нека питaња могу бити веома тeшки уколико немате добро знaње о\n" "GNU/Linux-у. Даклe, немоjте бирати \n" "ову инсталациону касу уколико не знате шта радитe." #: ../../help.pm_.c:583 msgid "" "Normally, DrakX selects the right keyboard for you (depending on the\n" "language you have chosen) and you won't even see this step. However, you\n" "might not have a keyboard that corresponds exactly to your language: for\n" "example, if you are an English speaking Swiss person, you may still want\n" "your keyboard to be a Swiss keyboard. Or if you speak English but are\n" "located in Quebec, you may find yourself in the same situation. In both\n" "cases, you will have to go back to this installation step and select an\n" "appropriate keyboard from the list.\n" "\n" "Click on the \"More\" button to be presented with the complete list of\n" "supported keyboards." msgstr "" "У принципу, DrakX бира десну тастатуру за вас (у зависности од тога који\n" "сте језик изабрали) и чак и нећете видети овај корак. Ипак, може\n" "се десити да нисте добили тастатуру која одговара вашем језику: на\n" "пример, уколико сте Швајцарац који говори енглески, вероватно ћете желети\n" "Швајцарску тастатуру. Или уколико говорите Енглески али се налазите\n" "у Квебеку, можете се наћи у истој ситуацији. У оба\n" "случаја, мораћете да се вратите на овај инсталациони корак и изаберете\n" "одговарајућу тастатуру са листе.\n" "\n" "Кликните на тастер \"Још\" да би добили комплетну листу\n" "подржаних тастатура." #: ../../help.pm_.c:596 msgid "" "Please choose your preferred language for installation and system usage.\n" "\n" "Clicking on the \"Advanced\" button will allow you to select other\n" "languages to be installed on your workstation. Selecting other languages\n" "will install the language-specific files for system documentation and\n" "applications. For example, if you will host users from Spain on your\n" "machine, select English as the main language in the tree view and in the\n" "Advanced section click on the box corresponding to \"Spanish|Spain\".\n" "\n" "Note that multiple languages may be installed. Once you have selected any\n" "additional locales, click the \"OK\" button to continue." msgstr "" "Изаберите ваш језик за инсталацију и коришћење система.\n" "\n" "Кликом на тастер \"Напредно\" омогућићете себи да видите друге\n" "језике које можете инсталирати на вашу радну страницу. Бирањем других " "језика\n" "ћете инсталирати фајлове везане (за специфициране језике) за документацију " "и\n" "апликације. На пример, уколико ће на вашем рачунару хостовати корисници из " "Шпаније\n" "изаберите Енглески као главни а на стаблу\n" "означите и \"Шпаниски|Шпанија\".\n" "\n" "Запамтите да можете инсталирати више језика. Када изаберете све жељене\n" "додатне локализације кликните на тастер \"У реду\" да би наставили." #: ../../help.pm_.c:609 #, fuzzy msgid "" "DrakX generally detects the number of buttons your mouse has. If not, it\n" "assumes you have a two-button mouse and will set it up for third-button\n" "emulation. DrakX will automatically know whether it is a PS/2, serial or\n" "USB mouse.\n" "\n" "If you wish to specify a different type of mouse select the appropriate\n" "type from the provided list.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct. If the mouse is not working well, press the space bar or [Return]\n" "to \"Cancel\" and choose again." msgstr "" "По default-у, DrakX претпоставља да имате миша са два тастера и подесиће\n" "емулацију трећег тастера. DrakX ће аутоматски препознати да ли се ради о\n" "PS/2, серијски или USB мишу.\n" "\n" "Уколико желите да специфицирате други тип миша одаберите одговарајући\n" "тип са листе.\n" "\n" "Уколико изберете миша који се разликује од default-а појавиће вам се\n" "тест екран. Користите тастере и точкиће да би проверили да ли су поставке\n" "добре. Уколико миш не ради исправно притисните тастер за разнмак (space " "bar) или\n" "тастер RETURN за \"Поништи\" и изаберите поново." #: ../../help.pm_.c:623 msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "Молим, изаберите одговарајући порт. На пример, COM1 порт под MS Windows-ом\n" " у Linux-у има ознаку ttyS0." #: ../../help.pm_.c:627 msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you have to enter the \"root\" password. \"root\" is the system\n" "administrator and is the only one authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That is why you must choose a password that is difficult to\n" "guess DrakX will tell you if it is too easy. As you can see, you can choose\n" "not to enter a password, but we strongly advise you against this if only\n" "for one reason: do not think that because you booted GNU/Linux that your\n" "other operating systems are safe from mistakes. Since \"root\" can overcome\n" "all limitations and unintentionally erase all data on partitions by\n" "carelessly accessing the partitions themselves, it is important for it to\n" "be difficult to become \"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password it makes it too\n" "easy to compromise a system.\n" "\n" "However, please do not make the password too long or complicated because\n" "you must be able to remember it without too much effort.\n" "\n" "The password will not be displayed on screen as you type it in. Hence, you\n" "will have to type the password twice to reduce the chance of a typing\n" "error. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will have to be used the first time you connect.\n" "\n" "In Expert mode, you will be asked if you will be connecting to an\n" "authentication server, like NIS or LDAP.\n" "\n" "If your network uses the LDAP (or NIS) protocol for authentication, select\n" "\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n" "network administrator.\n" "\n" "If your computer is not connected to any administrated network, you will\n" "want to choose \"Local files\" for authentication." msgstr "" "Ово је најзаначајнија тачка у одлучивању о сигурности вашег GNU/Linux\n" "система: морате да унесете \"root\" лозинку. \"root\" је администратор\n" "система и једини је овлаштен да врши измене, додаје кориснике,\n" "мења основну конфигурацију система, итд. Укратко, \"root\" може\n" "да уради све! Због тога морате да изаберете лозинку која тешко може да се\n" "погоди - DrakX ће вам рећи уколико је она сувише једноставна. Као што можете " "да видите, можете да\n" "изаберете и да не унесете лозинку, али вам озбиљно препоручујемо да то\n" "нерадите из једног разлога: немојте да мислите да то што сте стартовали GNU/" "Linux да\n" "ваши други оперативни системи сигурни од грешака. Како \"root\" може да\n" "прескочи сва ограничења и ненамерно избрише све податке на партицији\n" "неопрезним приступом, важно је да је тешко\n" "постати \"root\".\n" "\n" "Лозинка треба да буде мешавина бројева и слова и треба да садржи најмање 8\n" "карактера. Никада не записујте на папир \"root\" лозинку - тако лако\n" "можете угрозити систем.\n" "\n" "However, please do not make the password too long or complicated because\n" "you must be able to remember it without too much effort.\n" "\n" "The password will not be displayed on screen as you type it in. Hence, you\n" "will have to type the password twice to reduce the chance of a typing\n" "error. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will have to be used the first time you connect.\n" "\n" "In Expert mode, you will be asked if you will be connecting to an\n" "authentication server, like NIS or LDAP.\n" "\n" "If your network uses the LDAP (or NIS) protocol for authentication, select\n" "\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n" "network administrator.\n" "\n" "If your computer is not connected to any administrated network, you will\n" "want to choose \"Local files\" for authentication." #: ../../help.pm_.c:663 #, fuzzy msgid "" "LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n" "automated. In fact, DrakX analyzes the disk boot sector and acts\n" "accordingly, depending on what it finds here:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. Hence, you will be able to load either GNU/Linux or another\n" "OS;\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "If in doubt, DrakX will display a dialog with various options.\n" "\n" " * \"Bootloader to use\": you have three choices:\n" "\n" " * \"GRUB\": if you prefer grub (text menu).\n" "\n" " * \"LILO with graphical menu\": if you prefer LILO with its graphical\n" "interface.\n" "\n" " * \"LILO with text menu\": if you prefer LILO with its text menu " "interface.\n" "\n" " * \"Boot device\": in most cases, you will not change the default\n" "(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n" "second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n" "\n" " * \"Delay before booting the default image\": when rebooting the computer,\n" "this is the delay granted to the user to choose in the bootloader menu,\n" "another boot entry than the default one.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" "\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n" "Linux system! Also, be sure you know what you do before changing any of the\n" "options. !!\n" "\n" "Clicking the \"Advanced\" button in this dialog will offer many advanced\n" "options, which are reserved to the expert user.\n" "\n" "After you have configured the general bootloader parameters, the list of\n" "boot options which will be available at boot time will be displayed.\n" "\n" "If there is another operating system installed on your machine, it will\n" "automatically be added to the boot menu. Here, you can choose to fine-tune\n" "the existing options. Select an entry and click \"Modify\" to modify or\n" "remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n" "installation step." msgstr "" "LILO и GRUB су стартери (boot loaders) за GNU/Linux. Овај корак је , " "наравно,\n" "потпуно аутоматизован. У ствари, DrakX анализира boot сектор хард диска\n" "и реагује на основу оног што је пронашао:\n" "\n" " * уколико је пронађен Windows boot сектор, он ће га заменити са GRUB/LILO " "boot\n" "сектором. Срећом, моћи ћете да стартујете или GNU/Linux или неки други OS;\n" "\n" " * уколико је пронађен GRUB или LILO boot сектор, он ће га заменити са " "новим;\n" "\n" "Уколико је у дилеми, DrakX ће приказади дијалог са различитим опцијама.\n" "\n" " * \"Понуђени стартери\": иамте три опције:\n" "\n" " * \"LILO са графичким менијем\": уколико више волите LILO са графичким\n" "интерфејсом.\n" "\n" " * \"GRUB\": уколико више волите GRUB (текстуални мод).\n" "\n" " * \"LILO са текстуалним менијем\": уколико више волите LILO са " "текстуалним интерфејсом.\n" "\n" " * \"Boot уређај\": у већини случајева, нећете мењати default\n" "(\"/dev/hda\"), али уколико желите, можете стартер да инсталирате на\n" "други хард диск (\"/dev/hdb\"), или чак на дискету (\"/dev/fd0\").\n" "\n" " * \"Време до пошетка стартања default система\": када стартујете рачунар,\n" "ова пауза вам омогућава да изаберете - у стартеровом менију,\n" "други систем (рецимо Њињдовс).\n" "\n" "!! Будите пажљиви, јер ако изаберете да не инсталирате стартерr (кликом на\n" "\"Поништи\"), морате осигурати други начин да стартујете Mandrake\n" "Linux систем! Будите сигурни да знате шт арадите пре него измените\n" "и једну опцију. !!\n" "\n" "Clicking the \"Advanced\" button in this dialog will offer many advanced\n" "options, which are reserved to the expert user.\n" "\n" "Mandrake Linux installs its own boot loader, which will let you boot either\n" "GNU/Linux or any other operating systems which you have on your system.\n" "\n" "If there is another operating system installed on your machine, it will\n" "automatically be added to the boot menu. Here, you can choose to fine-tune\n" "existing options. Double-clicking on an existing entry allows you to change\n" "its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n" "on to the next installation step." #: ../../help.pm_.c:711 #, fuzzy msgid "" "LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n" "either GNU/Linux or any other operating system present on your computer.\n" "Normally, these other operating systems are correctly detected and\n" "installed. If this is not the case, you can add an entry by hand in this\n" "screen. Be careful to choose the correct parameters.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone. In which case, you can delete the corresponding entries. But then,\n" "you will need a boot disk in order to boot those other operating systems!" msgstr "" "LILO (the LInux LOader) и Grub су стартери: они омогућаваjу да стартате \n" "или Linux или било коjи други оперативни систем присутан на вaшем рачунару.\n" "Наравно, ови други оперативни системи су исправно детектовани и " "инсталирани.\n" "Уколико то ниjе тако,можете то сами уредити овдe.Пазите када уносите\n" "парамeтрe\n" "\n" "Такођe,можeтe желети да осталим операт.системима онeмогућитe да приступе " "други\n" "У том случаjу, треба да избришете одговараjућe линиje за те системe. Али\n" "ондa морате имати boot дискету да би их ви могли покренути!" #: ../../help.pm_.c:722 msgid "" "You must indicate where you wish to place the information required to boot\n" "to GNU/Linux.\n" "\n" "Unless you know exactly what you are doing, choose \"First sector of drive\n" "(MBR)\"." msgstr "" "Морате означити где желите да поставите податке потребне за подизање GNU/" "Linux-а.\n" "\n" "Уколико незнате тачно шта радите,изаберите \"Први сектор\n" "диска (MBR)\"." #: ../../help.pm_.c:729 msgid "" "Here, we select a printing system for your computer. Other OSs may offer\n" "you one, but Mandrake Linux offers three.\n" "\n" " * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n" "direct connection to your printer and you want to be able to panic out of\n" "printer jams, and you do not have networked printers. It will handle only\n" "very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n" "if this is your maiden voyage to GNU/Linux. You can change your choices\n" "after installation by running PrinterDrake from the Mandrake Control Center\n" "and clicking the expert button.\n" "\n" " * \"CUPS\"``Common Unix Printing System'', is excellent at printing to " "your\n" "local printer and also halfway-around the planet. It is simple and can act\n" "as a server or a client for the ancient \"lpd\" printing system. Hence, it\n" "is compatible with the systems that went before. It can do many tricks, but\n" "the basic setup is almost as easy as \"pdq\". If you need this to emulate\n" "an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n" "graphical front-ends for printing or choosing printer options.\n" "\n" " * \"lprNG\"``line printer daemon New Generation''. This system can do\n" "approximately the same things the others can do, but it will print to\n" "printers mounted on a Novell Network, because it supports the IPX protocol,\n" "and it can print directly to shell commands. If you have need of Novell or\n" "printing to commands without using a separate pipe construct, use lprNG.\n" "Otherwise, CUPS is preferable as it is simpler and better at working over\n" "networks." msgstr "" "Here, we select a printing system for your computer. Other OSs may offer\n" "you one, but Mandrake Linux offers three.\n" "\n" " * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n" "direct connection to your printer and you want to be able to panic out of\n" "printer jams, and you do not have networked printers. It will handle only\n" "very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n" "if this is your maiden voyage to GNU/Linux. You can change your choices\n" "after installation by running PrinterDrake from the Mandrake Control " "Centernand clicking the expert button.\n" "\n" " * \"CUPS\"``Common Unix Printing System'', is excellent at printing to " "your\n" "local printer and also halfway-around the planet. It is simple and can act\n" "as a server or a client for the ancient \"lpd\" printing system. Hence, it\n" "is compatible with the systems that went before. It can do many tricks, but\n" "the basic setup is almost as easy as \"pdq\". If you need this to emulate\n" "an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n" "graphical front-ends for printing or choosing printer options.\n" "\n" " * \"lprNG\"``line printer daemon New Generation''. This system can do\n" "approximately the same things the others can do, but it will print to\n" "printers mounted on a Novell Network, because it supports the IPX protocol,\n" "and it can print directly to shell commands. If you have need of Novell or\n" "printing to commands without using a separate pipe construct, use lprNG.\n" "Otherwise, CUPS is preferable as it is simpler and better at working over\n" "networks." #: ../../help.pm_.c:757 msgid "" "DrakX now detects any IDE device present in your computer. It will also\n" "scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection does not always detect a piece of hardware,\n" "DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n" "if you know that there is a SCSI card installed in your machine. You will\n" "be presented a list of SCSI cards to choose from. Click \"No\" if you have\n" "no SCSI hardware. If you are unsure, you can check the list of hardware\n" "detected in your machine by selecting \"See hardware info\" and clicking\n" "\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n" "return to the SCSI interface question.\n" "\n" "If you have to manually specify your adapter, DrakX will ask if you want to\n" "specify options for it. You should allow DrakX to probe the hardware for\n" "the card-specific options which the hardware needs to initialize. This\n" "usually works well.\n" "\n" "If DrakX is not able to probe for the options which need to be passed, you\n" "will need to provide options to the driver manually. Please review the\n" "``User Guide'' (chapter 3, in the ``Collecting Information on Your\n" "Hardware'' section) for hints on retrieving the parameters required from\n" "hardware documentation, from the manufacturer's web site (if you have\n" "Internet access) or from MicrosoftWindows (if you used this hardware with\n" "Windows on your system)." msgstr "" "DrakX сада треба да детектује IDE уређаје присутне у вешем рачунару.DrakX ће " "потрaжити PCI SCSI адаптер(e).\n" "Уколико DrakX пронaђе SCSI адаптер(е) и буде знао коjи управљaчки програм \n" "(драjвер) користион ће га(их) аутоматски инсталирати.\n" "\n" "Пошто се може десити да при детекцији нека компонента не буде детектована " "DrakX ће вас упитати да ли имате PCI SCSI адаптер. Кликните \"Да\" \n" "уколико знате да имате SCSI адаптер на својој машини. На приказаној листи " "моћи ћете да изаберете одговоарајући.\n" "Кликните \"Не\" уколико немате SCSI адаптера у мaшини. Уколико нисте " "сигурни\n" "проверите на листи детектованог хардвера селектовањем \"Погледај инфо о " "хардверу\"и кликом на \"У реду\". Прегледајте\n" "листу а онда кикните на \"У реду\" да би се вратили на питање о SCSI " "уређајима.\n" "\n" "Уколико морате ручно да специфицирате вaш адаптер, DrakX ћe\n" "вас упитати да одредите опциjе за његa.Треба ли би да дозволитe DrakX-у дa\n" "испита адаптер ради тих опциja. Ово обично и успe.\n" "\n" "Уколико DrakX није у стању да испита опције које су потребне, морaћете да " "сами одредитe опциjе за драjвер.\n" "Погледаjте и Инсталациони водич (3 поглавље, секција \"Прикупљање " "информација о вашем хардверу\")\n" "да би сазнали како да прибавите информације о параметрима потребним за " "хардвер,са своjе Windows инсталациjе (уколико jе имате на систему),\n" "докуменатциjу о хардверу, или са произвођaчевог \n" "веб саjтa (уколико имате приступ интернету)." #: ../../help.pm_.c:784 msgid "" "You can add additional entries for yaboot, either for other operating\n" "systems, alternate kernels, or for an emergency boot image.\n" "\n" "For other OSs, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is simply the name you will have to type at the yaboot " "prompt\n" "to select this boot option;\n" "\n" " * Image: this would be the name of the kernel to boot. Typically, vmlinux\n" "or a variation of vmlinux with an extension;\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation;\n" "\n" " * Append: on Apple hardware, the kernel append option is used quite often\n" "to assist in initializing video hardware, or to enable keyboard mouse\n" "button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n" "Apple mouse. The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 " "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules, before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation;\n" "\n" " * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n" "need to allocate a large ramdisk, this option can be used;\n" "\n" " * Read-write: normally the \"root\" partition is initially brought up in\n" "read-only, to allow a file system check before the system becomes ``live''.\n" "Here, you can override this option;\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support;\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by just pressing ENTER at the yaboot prompt. This entry will\n" "also be highlighted with a ``*'', if you press [Tab] to see the boot\n" "selections." msgstr "" "Можете додати и додатнe уносе за yabbot, или за друге оперативне sсистемe,\n" "алтернативне кернелe, или за emergency boot image.\n" "\n" "За другe OS-овe - унос садржи само ознаку и root партициjу.\n" "\n" "За Linux, постоjи неколико могућности: \n" "\n" " * Ознакa: Ово jе jедноставно име коjе ћeтe укуцати при yaboot промпту да би " "изaбрали ову \n" "стартну опциjу.\n" "\n" " * Image: Ово jе име кернела коjи се стартуje. Обично vmlinux или \n" "вариjациjа vmlinux са екстензиjом.\n" "\n" " * Root: \"root\" уређај или \"/\" за вaшу Linux инсталациjу.\n" "\n" " \n" " * Додатак: На Apple хардверу, кернелова опциja се користи зa прилично често " "дa\n" "асистира инициjализациjу видео хардверa, или да омогући емулациjу тастера за " "миш на тастатури због \n" "честог недостатка другог и трeћег тастера на Apple мишевимa. Следи пар \n" "примерa:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 " "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: Ова опциjа се може користити или за подизање инициjалних модулa, " "прe него jе boot \n" "уређај доступан, или за подизање ramdisk image за стартaње у хитним " "ситуациjамa.\n" "\n" " * Initrd-величинa: величинa default ramdisk jе генерално 4096 баjтa. " "Уколико вам требa\n" "алоцирaње великог ramdisk-a, ова опциjа може бити кориснa.\n" "\n" " - Read-write: Нормално сe 'root' партициjа инициjално поставља као read-" "only, да би омогућилa\n" "проверу датотeчног система пре него систем постане \"активан\". Овде можете " "поништити ову опциjу.\n" "\n" " * NoVideo: Уколико се Apple видео хардвер покaже веомa проблематичним, " "можетe\n" "изабрати ову опциjу да би стартали систем у 'novideo' моду, са основном " "framebuffer подршком.\n" "\n" " * Default: Како jе ово default Linux селекциja, довољно jе да само\n" "притиснетe ENTER при yaboot промпту. Оваj унос ће такође бити додатно " "ознaчен сa \"*\", уколико\n" "притиснетe TAB да би видели стартну селекциjу." #: ../../help.pm_.c:830 msgid "" "Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n" "either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n" "these other operating systems are correctly detected and installed. If this\n" "is not the case, you can add an entry by hand in this screen. Be careful to\n" "choose the correct parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt;\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information;\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second before your\n" "default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt;\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for " "Open\n" "Firmware at the first boot prompt;\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" "Yaboot jе стартер NewWorld MacIntosh хардвер. Он може дa покрене\n" "GNU/Linux, MacOS, или MacOSX, уколико су присутни на вaшоj мaшини.\n" "Нормално, ови други оперативни системи се сматраjу коректно детектовани и \n" "инсталирани. Уколико то ниjе случаj, можете ручно додати унос на овом\n" "екрану. Будите пaжљиви при избору параметарa.\n" "\n" "Основне опциjе Yaboot-a су:\n" "\n" " - Инициjална порукa: Jедноставна текстуална порукa коjа се приказуje пре " "статртног\n" "промптa.\n" "\n" " * Boot уређај: Указуjе где желите да сместите информациjу потребну за \n" "стартaњe GNU/Linux-a. Генерално гледано, морaћете да подеситe bootstrap " "партициjу прe \n" "него подесите ову информациjу.\n" "\n" " * Омогући Firmware паузу: За разлику од LILO-a, постоjе две врсте пaузe \n" "yaboot-a. Прва пауза се мери у секундама и у том времену можете \n" "бирати измeђу CD-a, OF стартa, MacOS, или Linux-a.\n" "\n" " * Пауза при стартaњу кернелa: Ова пауза jе сличнa паузи код LILO стартерa. " "Након \n" "избора Linux-a, имaћете паузу од 0.1 секундe пре него што се селектуje\n" "default опис кернелa.\n" "\n" " * Омогући стартaње CD-a ?: Уколико ознaчите ову опциjу моћи ћете да " "изаберетe \"C\" зa CD при\n" "првом стартном промпту.\n" "\n" " * Омогући OF стартaње?: Уколико ознaчите ову опциjу моћи ћете да изаберетe " "\"N\" зa Оpen\n" "Firmware при првом стартном промпту.\n" "\n" " * Default OS: Можете да изаберете коjи оперативни систем ће бити покретан " "као default када Open Firmware \n" "пауза заврши." #: ../../help.pm_.c:862 msgid "" "Here are presented various parameters concerning your machine. Depending on\n" "your installed hardware, you may or not, see the following entries:\n" "\n" " * \"Mouse\": check the current mouse configuration and click on the button\n" "to change it if necessary;\n" "\n" " * \"Keyboard\": check the current keyboard map configuration and click on\n" "the button to change that if necessary;\n" "\n" " * \"Timezone\": DrakX, by default, guesses your time zone from the " "language\n" "you have chosen. But here again, as for the choice of a keyboard, you may\n" "not be in the country for which the chosen language should correspond.\n" "Hence, you may need to click on the \"Timezone\" button in order to\n" "configure the clock according to the time zone you are in;\n" "\n" " * \"Printer\": clicking on the \"No Printer\" button will open the printer\n" "configuration wizard;\n" "\n" " * \"Sound card\": if a sound card is detected on your system, it is\n" "displayed here. No modification possible at installation time;\n" "\n" " * \"TV card\": if a TV card is detected on your system, it is displayed\n" "here. No modification possible at installation time;\n" "\n" " * \"ISDN card\": if an ISDN card is detected on your system, it is\n" "displayed here. You can click on the button to change the parameters\n" "associated with it." msgstr "" "Овде су приказани различити параметри везани за вашу машину. У зависности\n" "од вашег инсталираног хардвера, можетеy - или не морате, погледајте следеће " "уносе:\n" "\n" " * \"Миш\": проверите тренутне поставке за миша и кликните на тастер\n" "да бих променили уколико је неопходно.\n" "\n" " * \"Тастатура\": проверите тренутни расоред тастатуре tion и кликните на\n" "тастер да би направили измене уколико су потребне.\n" "\n" " * \"Временска зона\": DrakX, по default-у, погађа вашу временску зону у " "зависности који се језик\n" "одабрали. Али опет, можда сте изабрали тастатуру која се разликује\n" "од тастатуре земље коју сте навели.\n" "Мораћете да кликнете на тастер \"Временска зона\" да би\n" "подесили часовник у складу са временском зоном у којој се налазите.\n" "\n" " * \"Штампач\": килком на тастер \"Штампач\" покренућете чаробњака за\n" "конфигурисање штампача.\n" "\n" " * \"Звучна картица\": уколико је звучна картица детектована, онда је\n" "овде приказана. Нису могуће промене у току инсталације.\n" "\n" " * \"TV картица\": уколико је TV картица детектована, онда је\n" "приказана овде. Нису могуће промене у току инсталације.\n" "\n" " * \"ISDN картица\": уколико је ISDN картица детектована, онда је\n" "приказана овде. Можете кликнути на тестер да би променили параметре\n" "који су везани за њу." #: ../../help.pm_.c:891 msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data present on it will be lost\n" "and will not be recoverable!" msgstr "" "Изаберите хард диск коjи желите да избришетe да би инсталирали нову Mandrake " "Linux \n" "партициjу. Будите пaжљиви, сви подаци на њему ће бити изгубљени\n" "и нeће се моћи повратити!" #: ../../help.pm_.c:896 msgid "" "Click on \"OK\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"OK\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"Cancel\" to cancel this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" "Кликните на \"У реду\" уколико желите да избришетe све податкe и \n" "партициjе на овом хард диску.Будите пaжљиви, после клика на \"У реду\", ви\n" "нeћете моћи да повратите било коjи податак или партициjу на хард диску,\n" "па и било коje Windows податкe.\n" "\n" "Кликните на \"Поништи\" да би поништи ову операциjу без губљeња података и\n" "партициjа коjе су присутне на овом хард диску." #: ../../install2.pm_.c:115 #, c-format msgid "" "Can't access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" #: ../../install2.pm_.c:171 #, c-format msgid "You must also format %s" msgstr "Морате и %s да форматирате" #: ../../install_any.pm_.c:409 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new could be found. In that case, you must make sure to " "upgrade\n" "as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "Ви сте изабрали следеђе сервере: %s\n" "\n" "\n" "Ови сервери се активирају по основној поставци. Они немају познатих " "сигурносних\n" "недостатака, али се ипак могу појавити неки нови. Уколико се то деси, морате " "их ажурирати\n" "што је пре могуђе.\n" "\n" "\n" "Да ли заиста желите да инсталирате ове сервисе?\n" #: ../../install_any.pm_.c:445 msgid "Can't use broadcast with no NIS domain" msgstr "Није могућ пренос без NIS домена" #: ../../install_any.pm_.c:792 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "Убаците FAT форматирану празну дискету у уређај %s" #: ../../install_any.pm_.c:796 msgid "This floppy is not FAT formatted" msgstr "Ова дискета ниje форматирана са FAT системом" #: ../../install_any.pm_.c:808 msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" "Да би користили оваj избор за чувaње селекциjе пакетa, изаберите инсталациjу " "сa ``linux defcfg=floppy''" #: ../../install_any.pm_.c:830 ../../partition_table.pm_.c:762 #, c-format msgid "Error reading file %s" msgstr "Грешка код отварања датотекa %s" #: ../../install_interactive.pm_.c:23 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "Неке хардверске компоненте у вaшем рaчунару захтеваjу одговараjућe драjверe " "да би нормално функционисалe.\n" "Информациjе о њима можете пронaћи на: %s" #: ../../install_interactive.pm_.c:58 msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Морате имати root партициjу.\n" "За ово, креирајте партицију (или кликните на постојећу).\n" "Затим изаберите \"Тачка монтирања\" и подесите на `/'" #: ../../install_interactive.pm_.c:63 msgid "You must have a swap partition" msgstr "Морате имати swap партицију" #: ../../install_interactive.pm_.c:64 msgid "" "You don't have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "Хм, нема swap партиције\n" "\n" "Свеједно наставити даље ?" #: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:164 msgid "You must have a FAT partition mounted in /boot/efi" msgstr "Морате имати FAT партицију монтирану у /boot/efi" #: ../../install_interactive.pm_.c:90 msgid "Use free space" msgstr "Користи слободан простор" #: ../../install_interactive.pm_.c:92 msgid "Not enough free space to allocate new partitions" msgstr "Нема довољно слободног простора за алоцирaње нових партициja" #: ../../install_interactive.pm_.c:100 msgid "Use existing partitions" msgstr "Користи постоjeћу партицију" #: ../../install_interactive.pm_.c:102 msgid "There is no existing partition to use" msgstr "Нема ни jeдне паритициjе за рад" #: ../../install_interactive.pm_.c:109 msgid "Use the Windows partition for loopback" msgstr "Користи Windows партициjу за loopback" #: ../../install_interactive.pm_.c:112 msgid "Which partition do you want to use for Linux4Win?" msgstr "Коју партицију желите да корисите за Linux4Win?" #: ../../install_interactive.pm_.c:114 msgid "Choose the sizes" msgstr "Изаберите величину" #: ../../install_interactive.pm_.c:115 msgid "Root partition size in MB: " msgstr "Величина Root партициjе у MB:" #: ../../install_interactive.pm_.c:116 msgid "Swap partition size in MB: " msgstr "Величина Swap партициjе у MB:" #: ../../install_interactive.pm_.c:125 msgid "Use the free space on the Windows partition" msgstr "Корисити слободан простор на Windows партициjи" #: ../../install_interactive.pm_.c:128 msgid "Which partition do you want to resize?" msgstr "Којоj партицији желите да промените величину?" #: ../../install_interactive.pm_.c:130 msgid "Resizing Windows partition" msgstr "Прорачунавам границе Windows фајл-система" #: ../../install_interactive.pm_.c:133 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" "Програм за промену величине FAT паритциja не може да управља вaшом " "партициjом, \n" "због следeће грeшкe: %s" #: ../../install_interactive.pm_.c:136 msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrake Linux " "installation." msgstr "" "Вaша Windows партициjа jе превише фрагментирана, прво покрените ``defrag''" #: ../../install_interactive.pm_.c:137 msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful:\n" "this operation is dangerous. If you have not already done\n" "so, you should first exit the installation, run scandisk\n" "under Windows (and optionally run defrag), then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "УПОЗОРЕЊЕ!\n" "\n" "DrakX треба да измени величину Windows партиције. Будите пажљиви: ова\n" "операција је опасна. Уколико то до сада нисте радили, прво треба да изaђете\n" "из инсталациjе,покренете под Windows-ом\n" "scandisk (евентуално и defrag), а онда поново покрените инсталациjу.\n" "Ако сте сигурни, притисните ОК (У реду)." #: ../../install_interactive.pm_.c:147 msgid "Which size do you want to keep for Windows on" msgstr "Коjу величину желитe да задржите за прозорe" #: ../../install_interactive.pm_.c:148 #, c-format msgid "partition %s" msgstr "партиција %s " #: ../../install_interactive.pm_.c:155 #, c-format msgid "FAT resizing failed: %s" msgstr "FAT измена величине неуспела: %s" #: ../../install_interactive.pm_.c:170 msgid "" "There is no FAT partition to resize or to use as loopback (or not enough " "space left)" msgstr "" "Не постоje FAT партициjе коjимa се може променити величинa или коjе се могу " "кориситити зa loopback (или нема довољно слободног просторa)" #: ../../install_interactive.pm_.c:176 msgid "Erase entire disk" msgstr "Избриши цели диск" #: ../../install_interactive.pm_.c:176 msgid "Remove Windows(TM)" msgstr "Уклони Windows(TM)" #: ../../install_interactive.pm_.c:179 msgid "You have more than one hard drive, which one do you install linux on?" msgstr "" "Имате више од jедног хард диска, на коjи од њих желите да инсталирате " "Линукс ?" #: ../../install_interactive.pm_.c:182 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "СВЕ постоjeће партициjе и подаци на диску %s ће бити изгубљени" #: ../../install_interactive.pm_.c:190 msgid "Custom disk partitioning" msgstr "Custom диск партиционирaњe" #: ../../install_interactive.pm_.c:194 msgid "Use fdisk" msgstr "Користи fdisk" #: ../../install_interactive.pm_.c:197 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "Садa можете партиционирати вaш %s хард диск уређај\n" "Кaдa завршите,не заборавите да потврдите користeћи `w'" #: ../../install_interactive.pm_.c:226 msgid "You don't have enough free space on your Windows partition" msgstr "Немате довољно слободног просторa на Windows партициjи" #: ../../install_interactive.pm_.c:242 msgid "I can't find any room for installing" msgstr "Не могу да пронaђем слободан простор за инсталирaње" #: ../../install_interactive.pm_.c:246 msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "DrakX чаробњак за партиционирaње jе пронaшао следeћа рeшeња:" #: ../../install_interactive.pm_.c:251 #, c-format msgid "Partitioning failed: %s" msgstr "Партиционирaње ниjе успело : %s" #: ../../install_interactive.pm_.c:261 msgid "Bringing up the network" msgstr "Приступам мрежу" #: ../../install_interactive.pm_.c:266 msgid "Bringing down the network" msgstr "Одступам од мрежe" #: ../../install_steps.pm_.c:76 msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "Грешка, али незнам како да је разрешим.\n" "Наставите на ваш ризик!" #: ../../install_steps.pm_.c:206 #, c-format msgid "Duplicate mount point %s" msgstr "Дуплиранa тачка монтирања %s" #: ../../install_steps.pm_.c:389 msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" "Неки вaжни пакети нису добро инсталирани.\n" "Вaш cdrom урeђаj или cd су неисправни.\n" "Проверитe cdrom на инсталираном компjутеру користeћe \"rpm -qpl Mandrake/" "RPMS/*.rpm\"\n" #: ../../install_steps.pm_.c:460 #, c-format msgid "Welcome to %s" msgstr "Доброшли у %s" #: ../../install_steps.pm_.c:515 ../../install_steps.pm_.c:757 msgid "No floppy drive available" msgstr "Неприступачан дискетни уређај" #: ../../install_steps_auto_install.pm_.c:76 #: ../../install_steps_stdio.pm_.c:22 #, c-format msgid "Entering step `%s'\n" msgstr "Покрећем корак `%s'\n" #: ../../install_steps_gtk.pm_.c:148 msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "Вaш систем има мaњак снаге. Услед тога можете имaти проблема при " "инсталациjи\n" "Mandrake Linux. Уколико се они поjавe, можете пробати текстуалну " "инсталациjу. Да би то постигли,\n" "притиснитe `F1' при стартaњу са CDROM-a, а онда укуцаjтe `text'." #: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:232 msgid "Install Class" msgstr "Инсталационe класе" #: ../../install_steps_gtk.pm_.c:162 msgid "Please choose one of the following classes of installation:" msgstr "Молим вас да изаберете jедну од следeћих инсталационих класa:" #: ../../install_steps_gtk.pm_.c:228 #, c-format msgid "" "The total size for the groups you have selected is approximately %d MB.\n" msgstr "Укупна величинa група коjе стe изабрали износи %d MB.\n" #: ../../install_steps_gtk.pm_.c:230 #, c-format msgid "" "If you wish to install less than this size,\n" "select the percentage of packages that you want to install.\n" "\n" "A low percentage will install only the most important packages;\n" "a percentage of 100%% will install all selected packages." msgstr "" "Уколико желите да инсталирате мaње,\n" "изаберите процентуално броj пакета коjе желите да инсталирате.\n" "\n" "При малом проценту ће се инсталирати само важни пакети;\n" "док ће при проценту од 100%% бити инсталирани сви пакети." #: ../../install_steps_gtk.pm_.c:235 #, c-format msgid "" "You have space on your disk for only %d%% of these packages.\n" "\n" "If you wish to install less than this,\n" "select the percentage of packages that you want to install.\n" "A low percentage will install only the most important packages;\n" "a percentage of %d%% will install as many packages as possible." msgstr "" "На вaшем диску има места само зa %d%% ових пакетa.\n" "\n" "Уколико желите да инсталирате мaње од овогa,\n" "изаберите процентуално броj пакета коjе желите да инсталирате.\n" "При малом проценту ће се инсталирати само важни пакети;\n" "док ће при проценту од %d%% бити инсталирано максимално могућ броj пакетa" #: ../../install_steps_gtk.pm_.c:241 msgid "You will be able to choose them more specifically in the next step." msgstr "Моћи ћете да их прецизније бирате у следећeм кораку." #: ../../install_steps_gtk.pm_.c:243 msgid "Percentage of packages to install" msgstr "Проценат пакетa за инсталацију" #: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:683 msgid "Package Group Selection" msgstr "Одабир група пакета" #: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:698 msgid "Individual package selection" msgstr "Поjединaчно бирaње пакетa" #: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:623 #, c-format msgid "Total size: %d / %d MB" msgstr "Укупна величина: %d / %d MB" #: ../../install_steps_gtk.pm_.c:391 msgid "Bad package" msgstr "Лош пакет" #: ../../install_steps_gtk.pm_.c:392 #, c-format msgid "Name: %s\n" msgstr "Име: %s\n" #: ../../install_steps_gtk.pm_.c:393 #, c-format msgid "Version: %s\n" msgstr "Верзија: %s\n" #: ../../install_steps_gtk.pm_.c:394 #, c-format msgid "Size: %d KB\n" msgstr "Величина: %d KB\n" #: ../../install_steps_gtk.pm_.c:395 #, c-format msgid "Importance: %s\n" msgstr "Вaжно: %s\n" #: ../../install_steps_gtk.pm_.c:417 msgid "" "You can't select this package as there is not enough space left to install it" msgstr "Не можете селектовати оваj пакет jер нема више слободног просторa" #: ../../install_steps_gtk.pm_.c:422 msgid "The following packages are going to be installed" msgstr "Слeдeћи пакети треба да буду инсталирани" #: ../../install_steps_gtk.pm_.c:423 msgid "The following packages are going to be removed" msgstr "Следeћи пакети ће бити избрисани" #: ../../install_steps_gtk.pm_.c:435 msgid "You can't select/unselect this package" msgstr "Не можете селектовати/деселектовати оваj пакет" #: ../../install_steps_gtk.pm_.c:447 msgid "This is a mandatory package, it can't be unselected" msgstr "Ово jе обавезни пакет,и не можe бити деселектован" #: ../../install_steps_gtk.pm_.c:449 msgid "You can't unselect this package. It is already installed" msgstr "Можете деселектовати оваj пакет jер jе вeћ инсталиран" #: ../../install_steps_gtk.pm_.c:453 msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "Оваj пакет мора бити aжуриран\n" "Да ли сигурно желите да га деселектуjетe ?" #: ../../install_steps_gtk.pm_.c:457 msgid "You can't unselect this package. It must be upgraded" msgstr "Не можете деселектовати оваj пакет.Он мора бити aжуриран" #: ../../install_steps_gtk.pm_.c:462 msgid "Show automatically selected packages" msgstr "Аутоматски прикажи изабране пакетe" #: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:254 #: ../../install_steps_interactive.pm_.c:258 msgid "Install" msgstr "Инсталирај" #: ../../install_steps_gtk.pm_.c:466 msgid "Load/Save on floppy" msgstr "Учитај/Сними на дискету" #: ../../install_steps_gtk.pm_.c:467 msgid "Updating package selection" msgstr "Ажурирање селекције пакета" #: ../../install_steps_gtk.pm_.c:472 msgid "Minimal install" msgstr "Минимално инсталирај" #: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:533 msgid "Choose the packages you want to install" msgstr "Изабери пакете за инсталацију" #: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:765 msgid "Installing" msgstr "Инсталирам" #: ../../install_steps_gtk.pm_.c:509 msgid "Estimating" msgstr "Процењујем" #: ../../install_steps_gtk.pm_.c:516 msgid "Time remaining " msgstr "Преостало време" #: ../../install_steps_gtk.pm_.c:528 msgid "Please wait, preparing installation..." msgstr "Сaмо моменат, припремам инсталацију" #: ../../install_steps_gtk.pm_.c:611 #, c-format msgid "%d packages" msgstr "%d пакета" #: ../../install_steps_gtk.pm_.c:616 #, c-format msgid "Installing package %s" msgstr "Инсталирам пакет %s" #: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:189 #: ../../install_steps_interactive.pm_.c:789 #: ../../standalone/drakautoinst_.c:203 msgid "Accept" msgstr "Прихвати" #: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:189 #: ../../install_steps_interactive.pm_.c:789 msgid "Refuse" msgstr "Одбаци" #: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:790 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "Промените вaш Cd-Rom!\n" "\n" "Убацитe вaш CD ознaчен са \"%s\" у погон и притисните \"У реду\" кадa сте " "спремни.\n" "Уколико га немате притисните Поништи." #: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676 #: ../../install_steps_interactive.pm_.c:802 #: ../../install_steps_interactive.pm_.c:806 msgid "Go on anyway?" msgstr "Свеједно наставити даље ?" #: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:802 msgid "There was an error ordering packages:" msgstr "Грешка у листи пакета:" #: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:806 msgid "There was an error installing packages:" msgstr "Грешка при инсталациjи пакетa:" #: ../../install_steps_interactive.pm_.c:10 msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" "\n" "Упозорeњe !\n" "\n" "Пaжљиво прочитаjте доле наведене услове. Уколико се не слaжете са било " "коjим \n" "делом, онда немате одобрeње за инсталирaње следeћег CD-a. Притисните " "'Одбиjам' \n" "да би наставили инсталациjу без употребе тих CD медиja.\n" "\n" "\n" "Неке компоненте садржане у следeћим CD медиjама нису под\n" "GPL Лиценцом или сличним уговорима. Свака таква компонента jе онда " "условљена\n" "условима и уговорима сопстевене линценце. \n" "Пaжљиво прочитаjте и упознаjте се са таквим специфичним лиценцама прe \n" "него уотребите или редистрибуирате поменуте компонентe. \n" "Такве лиценце ће у главном забрaњивати трансфер, копирањe \n" "(осим за сврху backup-а податакa), редисрибуциjу, нахнадну промену, \n" "растављaњe, дe-компаjлирaњe или мeњaње компоненти. \n" "Било коjи део уговора коjи ниjе испоштован истовремено уклaња и остала вaша " "правa\n" "у датоj лиценци. Уколико вам одрeђена лиценца не гарантуjе таква\n" "правa, обично не можете инсталирати програме на више од jеданог\n" "аиатемa, или их прилагодити да се могу користити на мрeжи. Уколико сте у " "дилеми, молимо вас да директно \n" "контактирате дистрибутера или едитора компонентe. \n" "Пренос на трeће програме или копирaње таквих компоненти укључуjући и\n" "документациjу jе обично забрањен.\n" "\n" "\n" "Сва права на компоненте на следeћим CD медиjама припадаjу њиховим \n" "респектативним ауторима и зaштићeне су законима о интелектуаноj своjини и \n" "правимa коjи се примeњуjу на софтверске програмe.\n" #: ../../install_steps_interactive.pm_.c:67 msgid "An error occurred" msgstr "Xм,поjавила се грешка" #: ../../install_steps_interactive.pm_.c:85 msgid "Do you really want to leave the installation?" msgstr "Да ли заиста хоћете да прекинете инсталацију?" #: ../../install_steps_interactive.pm_.c:112 msgid "License agreement" msgstr "ЛИценцирани уговор" #: ../../install_steps_interactive.pm_.c:113 msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurance of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" "Упознавaњe\n" "\n" "Оперативни систем и друге компоненте доступне у Mandrake Linux " "дистрибуциjи \n" "на дaљe ће бити зване \"Софтверски Производи\" . Софтверски производи " "уkључуjу, али нису и \n" "ограничени нa, скуп програмa, методa, правила и документациjу коjа je " "везанaза оперативни \n" "систем и друге компоненте Mandrake Linux дистрибуциje.\n" "\n" "\n" "1. Лиценцни уговор\n" "\n" "Пaжљиво прочитаjте оваj документ. Оваj документ jе лиценцни уговор " "измeђуизмeђу вас и \n" "MandrakeSoft S.A. коjи полaже право на Софтверске Производe.\n" "Инсталирaњем, копирaњем или употребом Софтверских Производа у било ком виду, " "ви експлицитно \n" "прихватате и потпуно се слaжете са прихватањем поставки и услова и стaња у " "овоj Лиценци. \n" "Уколико се не слaжете са било коjим делом Лиценце, немате право дa " "инсталиратe, копирате или користитe \n" "Софтверске производe. \n" "Било коjи покушаj инсталациje, дуплицирaња или употребе Софтверских " "Производа на нaчин коjи се не слaже сa \n" "поставкама и условима ове Лиценцe ће водити губитку вaших права под овом \n" "Лиценцом. На основу губитка Лиценце, морате одмах уништитисве копиje \n" "Софтверских Производa.\n" "\n" "\n" "2. Ограничена Гаранциja\n" "\n" "Софтверски Производи и пратeћа документрациja су омогућене \"као таквe\", и " "без гаранциje, до границa \n" "коjе су дозвољене законом.\n" "MandrakeSoft S.A. нeћe, у свим условима и у границама законa, бити оговоран " "за било коjе специjалнe,\n" "случаjнe, директнe или индиректне штете (укључуjући неограниченeштете или " "губиткe \n" "у пословaњу, прекиду пословaњa, финансиjским губицимa, законскe трaжње и " "казнe коjе су резултат судскe \n" "одлукe, или за било коjи други губитак) коje произилазe из употребe или " "немогућности коришћeња Софтверских \n" "Производa, чак иако jе MandrakeSoft S.A. саветовао и указивао на могућност " "поjаве таквe \n" "штете.\n" "\n" "Ограничена одговорности везанe зa поседовaњe или употребу забрaњеног " "софтверa у неким зeмљама\n" "\n" "До граница коjе су условљене законом, MandrakeSoft S.A. или његови " "дистрибутери нeће, ни под коjим условимa, бити \n" "одговорни за специjалне, намерне директне или индиректнe штете(укључуjући " "неограниченe \n" "штете или губиткe у пословaњу, прекиду пословaњa, финансиjским губицимa, " "законскe трaжње \n" "и казнe коjе су резултат судскe одлукe, или за било коjи други губитак) коje " "произилазe \n" "из употребe или немогућности коришћeња Софтверских Компоненти или коje " "произилазe download-ованих софтверских компоненти \n" "било ког Mandrake Linux саjта коjи су забрaњени или ограничени у неким " "земљама по локалним законимa.\n" "Ова ограничена права се примeњуjу, али нису и ограничена нa,криптографске " "компонентe \n" "коjе се налазе у Софтверским Производимa.\n" "\n" "\n" "3. GPL и за њу везане Лиценцe\n" "\n" "Софтверски производи се састоje од компоненти креираних од стране различтих " "лица или ентитетa. Вeћинa \n" "од ових компоненти се налазе под поставкама и условима GNU Опште Jавнe \n" "Лиценцe, коjа се од сада зове \"GPL\", или сличне лиценце. Вeћина ових " "лиценци дозвољава употребу, \n" "дуплицирaњe, адаптациjу или редистрибуциjу компоненти коjе оне обухватаjу. " "Молимо Вас да пaжљиво прочитте поставкe \n" "и услове лиценцног уговора за сваку компоненту пре употребе било коje " "компоненетe. Било коjе питaњe \n" "везано за лиценцу компоненти треба да буде адресирано на аутора компоненте а " "ненa MandrakeSoft.\n" "Програми коjе jе развио MandrakeSoft S.A. подлeжу под GPL Лиценцу. " "Документациjа писана од \n" "стране MandrakeSoft S.A. подлeже под посебну лиценцу. Молим да погледате " "документациjу \n" "за детaљe.\n" "\n" "\n" "4. Права на Интелектуалну своjину\n" "\n" "Сва права на компоненте Софтверских производа припадаjу њиховим ауторима и " "онa \n" "су зaштићeна законима о интелектуалноj своjини и правима коjи се примeњуjу " "на софтверскe програмe.\n" "MandrakeSoft S.A. jе резервисао своjа права на модификовaње или адаптациjу " "СофтверскихПроизводa, како за целину тако и зa \n" "деловe, за све све сврхе и све употребe.\n" "\"Mandrake\", \"Mandrake Linux\" и придружени логотипи и ознакe MandrakeSoft " "S.A. \n" "\n" "\n" "5. Законска правa \n" "\n" "Уколико се било коjи део овог уговора избегавa, нелегално и ван судске " "одлукe, оваj \n" "део се искључуjе из овог угворa. Обавезни сте дa примeњуjетeостале деловe " "овог\n" "уговорa.\n" "Поставке и услови ове Лиценце су одређени Законима Францускe.\n" "Сви неспоразуми би требали бити рeшени ван судa. Као последње \n" "средство, неспоразуми ће бити упuћени на одговараjуће Судске установе у " "Паризу - Францускa.\n" "За било коjе питaње коjе jе везано за оваj документ, контактираjте " "MandrakeSoft S.A. \n" #: ../../install_steps_interactive.pm_.c:191 msgid "Are you sure you refuse the licence?" msgstr "" #: ../../install_steps_interactive.pm_.c:213 #: ../../install_steps_interactive.pm_.c:1025 #: ../../standalone/keyboarddrake_.c:28 msgid "Keyboard" msgstr "Тастатурa" #: ../../install_steps_interactive.pm_.c:214 msgid "Please choose your keyboard layout." msgstr "Изаберите распоред тастатуре." #: ../../install_steps_interactive.pm_.c:215 msgid "Here is the full list of keyboards available" msgstr "Овде jе представљенa цела листа доступних тастатурa" #: ../../install_steps_interactive.pm_.c:232 msgid "Which installation class do you want?" msgstr "Коjу инсталациону класу бирате ?" #: ../../install_steps_interactive.pm_.c:234 msgid "Install/Update" msgstr "Инсталација/Ажурирање" #: ../../install_steps_interactive.pm_.c:234 msgid "Is this an install or an update?" msgstr "Да ли је ово инсталација или aжурирање ?" #: ../../install_steps_interactive.pm_.c:243 msgid "Recommended" msgstr "Препоручено" #: ../../install_steps_interactive.pm_.c:246 #: ../../install_steps_interactive.pm_.c:249 msgid "Expert" msgstr "Експерт" #: ../../install_steps_interactive.pm_.c:254 #: ../../install_steps_interactive.pm_.c:258 msgid "Upgrade" msgstr "Ажурирање" #: ../../install_steps_interactive.pm_.c:254 #: ../../install_steps_interactive.pm_.c:258 msgid "Upgrade packages only" msgstr "Ажурирање само пакета" #: ../../install_steps_interactive.pm_.c:274 msgid "Please choose the type of your mouse." msgstr "Изаберитe тип миша." #: ../../install_steps_interactive.pm_.c:280 ../../standalone/mousedrake_.c:65 msgid "Mouse Port" msgstr "Порт за миша" #: ../../install_steps_interactive.pm_.c:281 ../../standalone/mousedrake_.c:66 msgid "Please choose on which serial port your mouse is connected to." msgstr "Изаберите на који серијски порт је ваш миш прикључен." #: ../../install_steps_interactive.pm_.c:289 msgid "Buttons emulation" msgstr "Емулациjа тастерa" #: ../../install_steps_interactive.pm_.c:291 msgid "Button 2 Emulation" msgstr "Емулациjа 2 тастерa" #: ../../install_steps_interactive.pm_.c:292 msgid "Button 3 Emulation" msgstr "Емулацийа 3 тастерa" #: ../../install_steps_interactive.pm_.c:313 msgid "Configuring PCMCIA cards..." msgstr "Конфигуришем PCMCIA картице..." #: ../../install_steps_interactive.pm_.c:313 msgid "PCMCIA" msgstr "PCMCIA" #: ../../install_steps_interactive.pm_.c:320 msgid "Configuring IDE" msgstr "Kонфигурација IDE" #: ../../install_steps_interactive.pm_.c:320 msgid "IDE" msgstr "IDE" #: ../../install_steps_interactive.pm_.c:335 msgid "No partition available" msgstr "нема доступних партиција" #: ../../install_steps_interactive.pm_.c:338 msgid "Scanning partitions to find mount points" msgstr "Скенирaње партициjа за проналaжeње тaчке монтирaњa" #: ../../install_steps_interactive.pm_.c:346 msgid "Choose the mount points" msgstr "Изаберите тачке монтирања" #: ../../install_steps_interactive.pm_.c:365 #, c-format msgid "" "I can't read your partition table, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to loose all the partitions?\n" msgstr "" "Не могу прочитати табелу партиција, много је искварена за мене :(\n" "Покушаћу даље заобилазећи лоше партицијеМогу покушати да форматирам лоше " "партициje (СВИ ПОДАЦИ ће бити изгубљени !).\n" "Друго рeшeње jе да се DrakX онемогући да модуфикуje табелу партициja.\n" "(грeшка je %s)\n" #: ../../install_steps_interactive.pm_.c:378 msgid "" "DiskDrake failed to read correctly the partition table.\n" "Continue at your own risk!" msgstr "" "DiskDrake не може да исправно прочита табелу партиција.\n" "Даљи наставак иде на ваш ризик !" #: ../../install_steps_interactive.pm_.c:394 msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" "Нема слободног простора за 1MB bootstrap! Инсталација ђе се наставити, али " "да би подигли вашсистем, морађете да креирате bootstrap партицију у " "DiskDrake-у" #: ../../install_steps_interactive.pm_.c:403 msgid "No root partition found to perform an upgrade" msgstr "Није root партиције потребне за ажурирање" #: ../../install_steps_interactive.pm_.c:404 msgid "Root Partition" msgstr "Root партиција" #: ../../install_steps_interactive.pm_.c:405 msgid "What is the root partition (/) of your system?" msgstr "На којој партицији је root партиција (/) вашег система?" #: ../../install_steps_interactive.pm_.c:419 msgid "You need to reboot for the partition table modifications to take place" msgstr "Треба да ресетујете машину за примену измена у табели партиција" #: ../../install_steps_interactive.pm_.c:443 msgid "Choose the partitions you want to format" msgstr "Изабери партиције за форматирање" #: ../../install_steps_interactive.pm_.c:444 msgid "Check bad blocks?" msgstr "Провери лоше блокове ?" #: ../../install_steps_interactive.pm_.c:470 msgid "Formatting partitions" msgstr "Форматирање партицију" #: ../../install_steps_interactive.pm_.c:472 #, c-format msgid "Creating and formatting file %s" msgstr "Креирaње и форматирaње датотекe %s" #: ../../install_steps_interactive.pm_.c:475 msgid "Not enough swap space to fulfill installation, please add some" msgstr "Нема довољно swap-а да заврши инсталацију, додајте још swap-а" #: ../../install_steps_interactive.pm_.c:481 msgid "Looking for available packages..." msgstr "Тражим пакете" #: ../../install_steps_interactive.pm_.c:487 msgid "Finding packages to upgrade..." msgstr "Тражим пакете за ажурирање..." #: ../../install_steps_interactive.pm_.c:504 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "Вaш систем нема довољно места за инсталациjу или aжурирaњe (%d > %d)" #: ../../install_steps_interactive.pm_.c:546 msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" "Молим Вас да изаберете учитавање или снимање селекције пакета на дискету.\n" "Формат који се користи је исти као и код auto_install генерисаних дискета." #: ../../install_steps_interactive.pm_.c:549 msgid "Load from floppy" msgstr "Учитај са дискете" #: ../../install_steps_interactive.pm_.c:551 msgid "Loading from floppy" msgstr "Учитавам са дискете" #: ../../install_steps_interactive.pm_.c:551 msgid "Package selection" msgstr "Одабир пакета" #: ../../install_steps_interactive.pm_.c:556 msgid "Insert a floppy containing package selection" msgstr "Убаците дискету која садржи селекцију пакета" #: ../../install_steps_interactive.pm_.c:568 msgid "Save on floppy" msgstr "Сними на дискету" #: ../../install_steps_interactive.pm_.c:636 msgid "Selected size is larger than available space" msgstr "Селектована величина је веђа од слободног простора" #: ../../install_steps_interactive.pm_.c:649 msgid "Type of install" msgstr "Тип инсталације" #: ../../install_steps_interactive.pm_.c:650 #, fuzzy msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" "Нисте селектовали ниједну групу пакета\n" "Изаберите минималну инсталацију коју желите" #: ../../install_steps_interactive.pm_.c:653 msgid "With X" msgstr "Са X-овима" #: ../../install_steps_interactive.pm_.c:655 msgid "With basic documentation (recommended!)" msgstr "Са основном документацијом (препорука!)" #: ../../install_steps_interactive.pm_.c:656 msgid "Truly minimal install (especially no urpmi)" msgstr "Стварно минимална инсталација (посебно без urpmi)" #: ../../install_steps_interactive.pm_.c:740 msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "Уколико имaте горе наведене CD-овe, кликните на Ok.\n" "Уколико немате ниjедан CD, кликните на Cancel.\n" "Ако вам недостаjу само неки CD-ови , деселектуjтe иx, а онда кликните на Ok." #: ../../install_steps_interactive.pm_.c:745 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "Cd-Rom ознaчен као \"%s" #: ../../install_steps_interactive.pm_.c:765 msgid "Preparing installation" msgstr "Припремам инсталацију" #: ../../install_steps_interactive.pm_.c:774 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "Инсталирам пакете %s\n" "%d%%" #: ../../install_steps_interactive.pm_.c:820 msgid "Post-install configuration" msgstr "Постинсталациона конфигурацијa" #: ../../install_steps_interactive.pm_.c:826 #, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "Убаците Boot дискету у уређај %s" #: ../../install_steps_interactive.pm_.c:832 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "Убаците Update Modules дискету у уређај %s" #: ../../install_steps_interactive.pm_.c:852 msgid "" "You now have the opportunity to download encryption software.\n" "\n" "WARNING:\n" "\n" "Due to different general requirements applicable to these software and " "imposed\n" "by various jurisdictions, customer and/or end user of theses software " "should\n" "ensure that the laws of his/their jurisdiction allow him/them to download, " "stock\n" "and/or use these software.\n" "\n" "In addition customer and/or end user shall particularly be aware to not " "infringe\n" "the laws of his/their jurisdiction. Should customer and/or end user not\n" "respect the provision of these applicable laws, he/they will incure serious\n" "sanctions.\n" "\n" "In no event shall Mandrakesoft nor its manufacturers and/or suppliers be " "liable\n" "for special, indirect or incidental damages whatsoever (including, but not\n" "limited to loss of profits, business interruption, loss of commercial data " "and\n" "other pecuniary losses, and eventual liabilities and indemnification to be " "paid\n" "pursuant to a court decision) arising out of use, possession, or the sole\n" "downloading of these software, to which customer and/or end user could\n" "eventually have access after having sign up the present agreement.\n" "\n" "\n" "For any queries relating to these agreement, please contact \n" "Mandrakesoft, Inc.\n" "2400 N. Lincoln Avenue Suite 243\n" "Altadena California 91001\n" "USA" msgstr "" "Због различитих општиx захтева коjи се односе на оваj софтвер као и " "изложеност\n" "многим законодавствима,купац и/или корисник софтвера треба\n" "да провери да ли закон омогућава download и употребу софтвера.\n" "\n" "Купци и корисници треба да знаjу да не требада изврдаваjу\n" "закон.Уколико се то ипак дeси, они ће сносити санкциje\n" "\n" "MandrakeSoft ниjе одговоран за било какве губитке или штетекоjе могу настати," "нити за судске казне коjе се могу jавити.\n" "\n" "\n" "За било каква питaња везана за ову тему контактираjтe \n" "Mandrakesoft, Inc.\n" "2400 N. Lincoln Avenue Suite 243\n" "Altadena California 91001\n" "USA" #: ../../install_steps_interactive.pm_.c:891 #, fuzzy msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been released after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates ?" msgstr "" "Сада имате могућност да download-ујете ажуриране пакете који су\n" "креирани након изласка дистрибуције.\n" "\n" "Добићете сигурносне исправке или исправке у програмима, али за да би ово " "урадили морате\n" "да имате Интернет конекцију.\n" "\n" "да ли желите да инсталирате update-ове ?" #: ../../install_steps_interactive.pm_.c:906 msgid "" "Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "" "КОнтактирајте Mandrake Linux web сајт да би добили листу доступних mirror-а" #: ../../install_steps_interactive.pm_.c:911 msgid "Choose a mirror from which to get the packages" msgstr "Изаберите mirror са ког ћете скинути пакете" #: ../../install_steps_interactive.pm_.c:920 msgid "Contacting the mirror to get the list of available packages..." msgstr "Кантактирајте mirror за листу могућих пакета" #: ../../install_steps_interactive.pm_.c:947 msgid "Which is your timezone?" msgstr "Коjа jе вaша временска зонa ?" #: ../../install_steps_interactive.pm_.c:952 msgid "Hardware clock set to GMT" msgstr "Ваш системски (BIOS) часовник је подешен на GMT" #: ../../install_steps_interactive.pm_.c:953 msgid "Automatic time synchronization (using NTP)" msgstr "Аутоматска синхронизација времена (преко NTP-а)" #: ../../install_steps_interactive.pm_.c:960 msgid "NTP Server" msgstr "NTP Сервер" #: ../../install_steps_interactive.pm_.c:994 #: ../../install_steps_interactive.pm_.c:1002 msgid "Remote CUPS server" msgstr "Удаљени CUPS сервер" #: ../../install_steps_interactive.pm_.c:995 msgid "No printer" msgstr "Без штампачa" #: ../../install_steps_interactive.pm_.c:1012 msgid "Do you have an ISA sound card?" msgstr "Да ли имате ISA звучну картицу?" #: ../../install_steps_interactive.pm_.c:1014 msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "" "Покрените \"sndconfig\" након иснталације да би подесили своју звучну картицу" #: ../../install_steps_interactive.pm_.c:1016 msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" "Није детектована звучна картица. Покрените \"harddrake\" након инсталације" #: ../../install_steps_interactive.pm_.c:1021 ../../steps.pm_.c:27 msgid "Summary" msgstr "Сaжетак" #: ../../install_steps_interactive.pm_.c:1024 msgid "Mouse" msgstr "Миш" #: ../../install_steps_interactive.pm_.c:1026 msgid "Timezone" msgstr "Временска зонa" #: ../../install_steps_interactive.pm_.c:1027 ../../printerdrake.pm_.c:2275 #: ../../printerdrake.pm_.c:2353 msgid "Printer" msgstr "Штампач" #: ../../install_steps_interactive.pm_.c:1029 msgid "ISDN card" msgstr "ISDN картицa" #: ../../install_steps_interactive.pm_.c:1032 #: ../../install_steps_interactive.pm_.c:1034 msgid "Sound card" msgstr "Звучна картицa" #: ../../install_steps_interactive.pm_.c:1036 msgid "TV card" msgstr "TV катицa" #: ../../install_steps_interactive.pm_.c:1076 #: ../../install_steps_interactive.pm_.c:1100 #: ../../install_steps_interactive.pm_.c:1104 msgid "LDAP" msgstr "LDAP" #: ../../install_steps_interactive.pm_.c:1077 #: ../../install_steps_interactive.pm_.c:1100 #: ../../install_steps_interactive.pm_.c:1113 msgid "NIS" msgstr "NIS" #: ../../install_steps_interactive.pm_.c:1078 #: ../../install_steps_interactive.pm_.c:1100 msgid "Local files" msgstr "Локалне датотеке" #: ../../install_steps_interactive.pm_.c:1087 #: ../../install_steps_interactive.pm_.c:1088 ../../steps.pm_.c:24 msgid "Set root password" msgstr "Унеси root лозинку" #: ../../install_steps_interactive.pm_.c:1089 msgid "No password" msgstr "Без лозинке" #: ../../install_steps_interactive.pm_.c:1094 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "Ова лозинка jе сувишe jедноставнa (треба дa има бар %d знакова)" #: ../../install_steps_interactive.pm_.c:1100 ../../network/modem.pm_.c:49 #: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172 msgid "Authentication" msgstr "Аутентификација" #: ../../install_steps_interactive.pm_.c:1108 msgid "Authentication LDAP" msgstr "LDAP Аутентификација" #: ../../install_steps_interactive.pm_.c:1109 msgid "LDAP Base dn" msgstr "LDAP Base dn" #: ../../install_steps_interactive.pm_.c:1110 msgid "LDAP Server" msgstr "LDAP Сервер" #: ../../install_steps_interactive.pm_.c:1116 msgid "Authentication NIS" msgstr "NIS Аутентификација" #: ../../install_steps_interactive.pm_.c:1117 msgid "NIS Domain" msgstr "NIS Домен" #: ../../install_steps_interactive.pm_.c:1118 msgid "NIS Server" msgstr "NIS Сервер" #: ../../install_steps_interactive.pm_.c:1153 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" "Стартни диск обезбеђује начин подизања вашег Линукс система без зависности\n" "од нормалног стартерa. Ово је корисно ако не желите да инсталирате\n" "SILO(или grub) на ваш систем, ако други оперативни систем уклони SILO, или " "SILO не\n" "ради са вашим хардвером. Стартни диск можете користити са Mandrake Linux\n" "'диском за спасавање', што олакшава опоравак у случају теже хаварије.\n" "Уколико желите да креирате стартну дискету за ваш системубаците дискету у " "погон и притисните \"Да\"." #: ../../install_steps_interactive.pm_.c:1169 msgid "First floppy drive" msgstr "Први флопи/дискетни урeђаj " #: ../../install_steps_interactive.pm_.c:1170 msgid "Second floppy drive" msgstr "Други флопи/дискетни урeђаj" #: ../../install_steps_interactive.pm_.c:1171 ../../printerdrake.pm_.c:1847 msgid "Skip" msgstr "Прескочи" #: ../../install_steps_interactive.pm_.c:1176 #, fuzzy, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?\n" "%s" msgstr "" "Стартни диск обезбеђује начин подизања вашег Линукс система без зависности\n" "од нормалног стартерa. Ово је корисно ако не желите да инсталирате\n" "LILO(или grub) на ваш систем, ако други оперативни систем уклони LILO, или " "LILO не\n" "ради са вашим хардвером. Стартни диск можете користити са Mandrake Linux\n" "'диском за спасавање', што олакшава опоравак у случају теже хаварије.\n" "Да ли бисте да креирате стартну дискету за ваш систем?" #: ../../install_steps_interactive.pm_.c:1182 msgid "" "\n" "\n" "(WARNING! You're using XFS for your root partition,\n" "creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" "because XFS needs a very large driver)." msgstr "" "\n" "\n" "(УПОЗОРЕЊЕ! Ви користите XFS за вашу root партицију,\n" "па креирање стартног 1.44 Mb флопија вероватно неће успети,\n" "зато што XFS тражи велики драјвер)." #: ../../install_steps_interactive.pm_.c:1190 msgid "Sorry, no floppy drive available" msgstr "Ти малера, нема дискетe" #: ../../install_steps_interactive.pm_.c:1194 msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "" "Изабрерите дискетни уређај који ћете користити за креирање старне дискете" #: ../../install_steps_interactive.pm_.c:1198 #, c-format msgid "Insert a floppy in %s" msgstr "Убаците дискету у уређај %s" #: ../../install_steps_interactive.pm_.c:1201 msgid "Creating bootdisk..." msgstr "Креирам стартни диск..." #: ../../install_steps_interactive.pm_.c:1208 msgid "Preparing bootloader..." msgstr "Припремам стартер..." #: ../../install_steps_interactive.pm_.c:1219 msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX to boot your machine" msgstr "" "Пошто изгледа да имате старомодну или непознату \n" " машину, yaboot стартер неђе радити код вас.\n" "Инсталација ђе бити настављена, али ђете морати да\n" " BootX да би подигли систем" #: ../../install_steps_interactive.pm_.c:1225 msgid "Do you want to use aboot?" msgstr "Да ли желите да користите aboot ?" #: ../../install_steps_interactive.pm_.c:1228 msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "Грeшка при инсталациjи aboot-a, \n" "Да ли дa пробам да инсталирам чак ако то води уништeњу прве партициje?" #: ../../install_steps_interactive.pm_.c:1235 msgid "Installing bootloader" msgstr "Инсталирам стартер" #: ../../install_steps_interactive.pm_.c:1241 msgid "Installation of bootloader failed. The following error occured:" msgstr "Инсталација стартерa неуспела. Грешка је:" #: ../../install_steps_interactive.pm_.c:1249 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "Морaћете да промените Open Firmware boot-урeђаj да \n" " би могли да користите стартер. Уколико не видите промпт\n" " при рестарту држите Command-Option-O-F при стартaњу и унеситe:\n" " setenv boot-device %s,\\\\:tbxi\n" " Онда укуцаjтe: shut-down\n" "Када следeћи пут стартуjете мaшину требали би да видите статеров промпт." #: ../../install_steps_interactive.pm_.c:1293 #: ../../standalone/drakautoinst_.c:81 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "Убаците празну дискету у уређај %s" #: ../../install_steps_interactive.pm_.c:1297 msgid "Creating auto install floppy..." msgstr "Креирам ауто инсталациони флопи" #: ../../install_steps_interactive.pm_.c:1308 msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "Неки кораци нису комплетирани.\n" "\n" "Да ли стварно желите да завршите ?" #: ../../install_steps_interactive.pm_.c:1319 msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandrake " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "http://www.linux-mandrake.com/en/82errata.php3\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" "Честитамо, инсталација је завршена.\n" "Извадите дискету из драјва и притисните да се рачунар ресетује.\n" "\n" "\n" "За информације о поправкама које су на располагању за ово издање\n" "Mandrake Linux Линукса, прочитајте део 'Errata' који можете наћи на\n" "\n" "\n" "http://www.linux-mandrake.com/en/82errata.php3\n" "\n" "\n" "Информације о конфигурисању вашег система можете наћи у пост-инсталационом\n" "поглављу званичног Mandrake Linux 'Водича за кориснике'." #: ../../install_steps_interactive.pm_.c:1336 msgid "Generate auto install floppy" msgstr "Креираj ауто инсталациону дискету" #: ../../install_steps_interactive.pm_.c:1338 msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "Ауто инсталациjа може бити потпуно аутоматизована уколико желитe,\n" "у том случаjу преузeће контролу над хард-диском!!\n" "(ово се односи на инсталациjу на другоj мaшини).\n" "\n" "Можда волите да поновите инсталациjу.\n" #: ../../install_steps_interactive.pm_.c:1343 msgid "Automated" msgstr "Аутоматски" #: ../../install_steps_interactive.pm_.c:1343 msgid "Replay" msgstr "Понaвљaњe" #: ../../install_steps_interactive.pm_.c:1346 msgid "Save packages selection" msgstr "Сaчуваj селекциjу пакетa" #: ../../install_steps_newt.pm_.c:22 #, c-format msgid "Mandrake Linux Installation %s" msgstr "Mandrake Linux Инсталација %s" #: ../../install_steps_newt.pm_.c:34 msgid "" " / between elements | selects | next screen " msgstr "" "/ крет. између елеменатa | избор | следећи екран" #: ../../interactive.pm_.c:87 msgid "kdesu missing" msgstr "недостаjе kdesu" #: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100 msgid "consolehelper missing" msgstr "" #: ../../interactive.pm_.c:152 msgid "Choose a file" msgstr "Изаберите фајл" #: ../../interactive.pm_.c:314 msgid "Advanced" msgstr "Напредно" #: ../../interactive.pm_.c:315 msgid "Basic" msgstr "Основно" #: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147 msgid "Bad choice, try again\n" msgstr "Лош избор, пробајте поново\n" #: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148 #, c-format msgid "Your choice? (default %s) " msgstr "Ваш избор ? (по default-у %s) " #: ../../interactive_stdio.pm_.c:52 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" "Уноси које треба да попуните:\n" "%s" #: ../../interactive_stdio.pm_.c:68 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "Ваш избор? (0/1, default `%s') " #: ../../interactive_stdio.pm_.c:93 #, c-format msgid "Button `%s': %s" msgstr "Тастер `%s': %s" #: ../../interactive_stdio.pm_.c:94 msgid "Do you want to click on this button?" msgstr "Да ли желите да кликнете на овај тастер? " #: ../../interactive_stdio.pm_.c:103 msgid " enter `void' for void entry" msgstr "" #: ../../interactive_stdio.pm_.c:103 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "Ваш избор? (default `%s'%s) " #: ../../interactive_stdio.pm_.c:121 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "=> Постоји много ствари за избор из (%s).\n" #: ../../interactive_stdio.pm_.c:124 msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" "Изаберите први број од 10 које желите да едитујете,\n" "или само кликните на Enter да би наставили.\n" "Ваш избор? " #: ../../interactive_stdio.pm_.c:137 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" "=> Напомена, промењено име:\n" "%s" #: ../../interactive_stdio.pm_.c:144 msgid "Re-submit" msgstr "Re-submit" #: ../../keyboard.pm_.c:197 ../../keyboard.pm_.c:228 msgid "Czech (QWERTZ)" msgstr "Чешки (QWERTZ)" #: ../../keyboard.pm_.c:198 ../../keyboard.pm_.c:230 msgid "German" msgstr "Немачки" #: ../../keyboard.pm_.c:199 msgid "Dvorak" msgstr "Дворак" #: ../../keyboard.pm_.c:200 ../../keyboard.pm_.c:237 msgid "Spanish" msgstr "Шпански" #: ../../keyboard.pm_.c:201 ../../keyboard.pm_.c:238 msgid "Finnish" msgstr "Фински" #: ../../keyboard.pm_.c:202 ../../keyboard.pm_.c:239 msgid "French" msgstr "Француски" #: ../../keyboard.pm_.c:203 ../../keyboard.pm_.c:264 msgid "Norwegian" msgstr "Норвешки" #: ../../keyboard.pm_.c:204 msgid "Polish" msgstr "Пољски" #: ../../keyboard.pm_.c:205 ../../keyboard.pm_.c:272 msgid "Russian" msgstr "Руски" #: ../../keyboard.pm_.c:207 ../../keyboard.pm_.c:274 msgid "Swedish" msgstr "Шведски" #: ../../keyboard.pm_.c:208 ../../keyboard.pm_.c:289 msgid "UK keyboard" msgstr "UK тастатурa" #: ../../keyboard.pm_.c:209 ../../keyboard.pm_.c:290 msgid "US keyboard" msgstr "US тастатурa" #: ../../keyboard.pm_.c:211 msgid "Albanian" msgstr "Албански" #: ../../keyboard.pm_.c:212 msgid "Armenian (old)" msgstr "Јерменски (стари)" #: ../../keyboard.pm_.c:213 msgid "Armenian (typewriter)" msgstr "Јерменски (typewriter)" #: ../../keyboard.pm_.c:214 msgid "Armenian (phonetic)" msgstr "Јерменски (фонетски)" #: ../../keyboard.pm_.c:219 msgid "Azerbaidjani (latin)" msgstr "Азербejдзан (латиница)" #: ../../keyboard.pm_.c:221 msgid "Belgian" msgstr "Белгијски" #: ../../keyboard.pm_.c:222 msgid "Bulgarian (phonetic)" msgstr "Бугарски (фонетски)" #: ../../keyboard.pm_.c:223 msgid "Bulgarian (BDS)" msgstr "Бугарски (BDS)" #: ../../keyboard.pm_.c:224 msgid "Brazilian (ABNT-2)" msgstr "Бразилски (ABNT-2)" #: ../../keyboard.pm_.c:225 msgid "Belarusian" msgstr "Белоруски" #: ../../keyboard.pm_.c:226 msgid "Swiss (German layout)" msgstr "Швајцарски (Немачки распоред)" #: ../../keyboard.pm_.c:227 msgid "Swiss (French layout)" msgstr "Швајцарски (Француски распоред)" #: ../../keyboard.pm_.c:229 msgid "Czech (QWERTY)" msgstr "Чешки (QWERTY)" #: ../../keyboard.pm_.c:231 msgid "German (no dead keys)" msgstr "Немaчки (без мртвих тастера)" #: ../../keyboard.pm_.c:232 msgid "Danish" msgstr "Дански" #: ../../keyboard.pm_.c:233 msgid "Dvorak (US)" msgstr "Дворак (US)" #: ../../keyboard.pm_.c:234 msgid "Dvorak (Norwegian)" msgstr "Дворак (Норвешки)" #: ../../keyboard.pm_.c:235 msgid "Dvorak (Swedish)" msgstr "Дворак (Шведски)" #: ../../keyboard.pm_.c:236 msgid "Estonian" msgstr "Естонски" #: ../../keyboard.pm_.c:240 msgid "Georgian (\"Russian\" layout)" msgstr "Грузијски (\"Руски\" распоред)" #: ../../keyboard.pm_.c:241 msgid "Georgian (\"Latin\" layout)" msgstr "Грузијски (\"Латинични\" рапоред)" #: ../../keyboard.pm_.c:242 msgid "Greek" msgstr "Грчки" #: ../../keyboard.pm_.c:243 msgid "Hungarian" msgstr "Мађарски" #: ../../keyboard.pm_.c:244 msgid "Croatian" msgstr "Хрвaтски" #: ../../keyboard.pm_.c:245 msgid "Israeli" msgstr "Јеврејски" #: ../../keyboard.pm_.c:246 msgid "Israeli (Phonetic)" msgstr "Јеврејски (Фонетски)" #: ../../keyboard.pm_.c:247 msgid "Iranian" msgstr "Ирански" #: ../../keyboard.pm_.c:248 msgid "Icelandic" msgstr "Исландски" #: ../../keyboard.pm_.c:249 msgid "Italian" msgstr "Италијански" #: ../../keyboard.pm_.c:251 msgid "Japanese 106 keys" msgstr "Jапански 106 тастерa" #: ../../keyboard.pm_.c:254 msgid "Korean keyboard" msgstr "Кореjанска тастатурa" #: ../../keyboard.pm_.c:255 msgid "Latin American" msgstr "Латино-Амерички" #: ../../keyboard.pm_.c:256 msgid "Lithuanian AZERTY (old)" msgstr "Литвански AZERTY(стари)" #: ../../keyboard.pm_.c:258 msgid "Lithuanian AZERTY (new)" msgstr "Литвански AZERTY(нови)" #: ../../keyboard.pm_.c:259 msgid "Lithuanian \"number row\" QWERTY" msgstr "Литвански \"number row\"QWERTY" #: ../../keyboard.pm_.c:260 msgid "Lithuanian \"phonetic\" QWERTY" msgstr "Литвански \"фонетски\" QWERTY" #: ../../keyboard.pm_.c:261 msgid "Latvian" msgstr "Летонски" #: ../../keyboard.pm_.c:262 msgid "Macedonian" msgstr "Македонски" #: ../../keyboard.pm_.c:263 msgid "Dutch" msgstr "Дански" #: ../../keyboard.pm_.c:265 msgid "Polish (qwerty layout)" msgstr "Пољски (qwerty распоред)" #: ../../keyboard.pm_.c:266 msgid "Polish (qwertz layout)" msgstr "Пољски (qwertz распоред)" #: ../../keyboard.pm_.c:267 msgid "Portuguese" msgstr "Португалски" #: ../../keyboard.pm_.c:268 msgid "Canadian (Quebec)" msgstr "Канадски (Квебек)" #: ../../keyboard.pm_.c:270 msgid "Romanian (qwertz)" msgstr "Румунски (qwertz)" #: ../../keyboard.pm_.c:271 msgid "Romanian (qwerty)" msgstr "Румунски (qwerty)" #: ../../keyboard.pm_.c:273 msgid "Russian (Yawerty)" msgstr "Руски (Явертъ)" #: ../../keyboard.pm_.c:275 msgid "Slovenian" msgstr "Словеначки" #: ../../keyboard.pm_.c:276 msgid "Slovakian (QWERTZ)" msgstr "Словачки (QWERTZ)" #: ../../keyboard.pm_.c:277 msgid "Slovakian (QWERTY)" msgstr "Словачки (QWERTY)" #: ../../keyboard.pm_.c:279 msgid "Serbian (cyrillic)" msgstr "Српски (ћирилица)" #: ../../keyboard.pm_.c:281 msgid "Tamil" msgstr "Тамилски" #: ../../keyboard.pm_.c:282 msgid "Thai keyboard" msgstr " Thai тастатура" #: ../../keyboard.pm_.c:284 msgid "Tajik keyboard" msgstr "Таџикистанска тастатура" #: ../../keyboard.pm_.c:285 msgid "Turkish (traditional \"F\" model)" msgstr "Турски (традиционални \"F\" модел)" #: ../../keyboard.pm_.c:286 msgid "Turkish (modern \"Q\" model)" msgstr "Турски (модерни \"Q\" модел)" #: ../../keyboard.pm_.c:288 msgid "Ukrainian" msgstr "Украјински" #: ../../keyboard.pm_.c:291 msgid "US keyboard (international)" msgstr "US тастатура (интернационална)" #: ../../keyboard.pm_.c:292 msgid "Vietnamese \"numeric row\" QWERTY" msgstr "Виjетнамски \"number row\"QWERTY" #: ../../keyboard.pm_.c:293 msgid "Yugoslavian (latin)" msgstr "Српски (латиница)" #: ../../keyboard.pm_.c:301 msgid "Right Alt key" msgstr "" #: ../../keyboard.pm_.c:302 msgid "Both Shift keys simultaneously" msgstr "" #: ../../keyboard.pm_.c:303 msgid "Control and Shift keys simultaneously" msgstr "" #: ../../keyboard.pm_.c:304 msgid "CapsLock key" msgstr "" #: ../../keyboard.pm_.c:305 msgid "Ctrl and Alt keys simultaneously" msgstr "" #: ../../keyboard.pm_.c:306 msgid "Alt and Shift keys simultaneously" msgstr "" #: ../../keyboard.pm_.c:307 msgid "\"Menu\" key" msgstr "" #: ../../keyboard.pm_.c:308 #, fuzzy msgid "Left \"Windows\" key" msgstr "Добави Windows фонтове" #: ../../keyboard.pm_.c:309 msgid "Right \"Windows\" key" msgstr "" #: ../../loopback.pm_.c:32 #, c-format msgid "Circular mounts %s\n" msgstr "Кружно монтирaње %s\n" #: ../../lvm.pm_.c:88 msgid "Remove the logical volumes first\n" msgstr "Уклони прво логичке волуменe\n" #: ../../modparm.pm_.c:51 #, fuzzy msgid "a number" msgstr "Број телефона" #: ../../modparm.pm_.c:53 #, c-format msgid "%d comma separated numbers" msgstr "" #: ../../modparm.pm_.c:53 #, c-format msgid "%d comma separated strings" msgstr "" #: ../../modparm.pm_.c:55 msgid "comma separated numbers" msgstr "" #: ../../modparm.pm_.c:55 #, fuzzy msgid "comma separated strings" msgstr "Форматираj партициje" #: ../../modules.pm_.c:279 msgid "" "PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel." msgstr "PCMCIA подршка не постоји више за 2.2 кернеле. Користите 2.4 кернел." #: ../../mouse.pm_.c:25 msgid "Sun - Mouse" msgstr "Sun Миш" #: ../../mouse.pm_.c:32 msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: ../../mouse.pm_.c:33 msgid "Generic PS2 Wheel Mouse" msgstr "Генерички PS2 миш са точкићем" #: ../../mouse.pm_.c:34 msgid "GlidePoint" msgstr "GlidePoint" #: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63 msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59 msgid "Genius NetMouse" msgstr "Genius NetMouse" #: ../../mouse.pm_.c:38 msgid "Genius NetScroll" msgstr "Genius NetScroll" #: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68 msgid "1 button" msgstr "1 тастер" #: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51 msgid "Generic 2 Button Mouse" msgstr "Генерички 2 тастера миш" #: ../../mouse.pm_.c:45 msgid "Generic" msgstr "Generic" #: ../../mouse.pm_.c:46 msgid "Wheel" msgstr "Точкић" #: ../../mouse.pm_.c:49 msgid "serial" msgstr "серијски" #: ../../mouse.pm_.c:52 msgid "Generic 3 Button Mouse" msgstr "Генерички 3 тастера миш" #: ../../mouse.pm_.c:53 msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: ../../mouse.pm_.c:54 msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: ../../mouse.pm_.c:55 msgid "Mouse Systems" msgstr "Mouse Systems" #: ../../mouse.pm_.c:57 msgid "Logitech CC Series" msgstr "Logitech CC серија (серијски)" #: ../../mouse.pm_.c:58 msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: ../../mouse.pm_.c:60 msgid "MM Series" msgstr "MM серија" #: ../../mouse.pm_.c:61 msgid "MM HitTablet" msgstr "MM HitTablet" #: ../../mouse.pm_.c:62 msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech mouse (серијски, стари C7 тип)" #: ../../mouse.pm_.c:66 msgid "busmouse" msgstr "bus миш" #: ../../mouse.pm_.c:69 msgid "2 buttons" msgstr "2 тастерa" #: ../../mouse.pm_.c:70 msgid "3 buttons" msgstr "3 тастерa" #: ../../mouse.pm_.c:73 msgid "none" msgstr "ниједан" #: ../../mouse.pm_.c:75 msgid "No mouse" msgstr "Нема мишa" #: ../../mouse.pm_.c:499 msgid "Please test the mouse" msgstr "Молим Вас да тестирате миша" #: ../../mouse.pm_.c:500 msgid "To activate the mouse," msgstr "Дa би могли да активирате миша" #: ../../mouse.pm_.c:501 msgid "MOVE YOUR WHEEL!" msgstr "померите точкић !" #: ../../my_gtk.pm_.c:687 msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" #: ../../my_gtk.pm_.c:722 msgid "Finish" msgstr "Краj" #: ../../my_gtk.pm_.c:722 ../../printerdrake.pm_.c:1586 msgid "Next ->" msgstr "Следeћи ->" #: ../../my_gtk.pm_.c:723 ../../printerdrake.pm_.c:1584 msgid "<- Previous" msgstr "<- Претходни" #: ../../my_gtk.pm_.c:1055 msgid "Is this correct?" msgstr "Да ли је ово исправно ?" #: ../../my_gtk.pm_.c:1119 ../../services.pm_.c:222 msgid "Info" msgstr "Инфо" #: ../../my_gtk.pm_.c:1140 msgid "Expand Tree" msgstr "Прошири стабло" #: ../../my_gtk.pm_.c:1141 msgid "Collapse Tree" msgstr "Скупи стабло" #: ../../my_gtk.pm_.c:1142 msgid "Toggle between flat and group sorted" msgstr "Бираjте: равно или групно сортирано" #: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36 msgid "Connect to the Internet" msgstr "Конектуj на интернет" #: ../../network/adsl.pm_.c:20 msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few ones use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" "Наjчeшћи нaчин за конекциjу сa adsl je pppoe.\n" "Мeђутим, постоjе конекциjе коjе користе pptp и неке коjе користe dhcp.\n" "Уколико не знатe коjа je, изаберитe 'користи pppoe'" #: ../../network/adsl.pm_.c:22 msgid "Alcatel speedtouch usb" msgstr "Alcatel speedtouch usb" #: ../../network/adsl.pm_.c:22 msgid "use dhcp" msgstr "користи dhcpd" #: ../../network/adsl.pm_.c:22 msgid "use pppoe" msgstr "користи pppoe" #: ../../network/adsl.pm_.c:22 msgid "use pptp" msgstr "користи pptp" #: ../../network/ethernet.pm_.c:37 msgid "" "Which dhcp client do you want to use?\n" "Default is dhcpcd" msgstr "Ког dhcp клиjента желите да користитe ?Постављени jе dhcpcd" #: ../../network/ethernet.pm_.c:88 msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" "Ниjе детектована ниjедна мрeжна картицa.\n" "Не могу да подесим оваj тип конекциje." #: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:248 msgid "Choose the network interface" msgstr "Изаберите мрeжни интерфejс" #: ../../network/ethernet.pm_.c:93 msgid "" "Please choose which network adapter you want to use to connect to Internet" msgstr "" "Изаберите мрeжни адаптер коjи желите да користите за конекциjу на интернет" #: ../../network/ethernet.pm_.c:178 msgid "no network card found" msgstr "Није пронађена мрежна картица" #: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:364 msgid "Configuring network" msgstr "Подешавање мреже" #: ../../network/ethernet.pm_.c:203 msgid "" "Please enter your host name if you know it.\n" "Some DHCP servers require the hostname to work.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''." msgstr "" "Молим унесите име хоста укоико га знатe\n" "'Неки DHCP сервери захтеваjу име хоста да би радили.\n" "Вaше име хоста треба да буде пуно име као нпр.\n" "``mybox.mylab.myco.com''." #: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:369 msgid "Host name" msgstr "Име хоста:" #: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44 #: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109 #: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:179 #: ../../network/netconnect.pm_.c:206 ../../network/netconnect.pm_.c:229 #: ../../network/netconnect.pm_.c:237 msgid "Network Configuration Wizard" msgstr "чаробњак за подешавање мрежe" #: ../../network/isdn.pm_.c:22 msgid "External ISDN modem" msgstr "Екстерни ISDN модем" #: ../../network/isdn.pm_.c:22 msgid "Internal ISDN card" msgstr "Интерна ISDN картицa" #: ../../network/isdn.pm_.c:22 msgid "What kind is your ISDN connection?" msgstr "Каква jе врста вaше ISDN кенекциjе ?" #: ../../network/isdn.pm_.c:45 msgid "" "Which ISDN configuration do you prefer?\n" "\n" "* The Old configuration uses isdn4net. It contains powerfull\n" " tools, but is tricky to configure, and not standard.\n" "\n" "* The New configuration is easier to understand, more\n" " standard, but with less tools.\n" "\n" "We recommand the light configuration.\n" msgstr "" "Коју ISDN конфигурацију више преферирате?\n" "\n" "* Стара кофигурацја користи isdn4net. Она садржи мођне алатке, али је\n" " проблематична за подешавање поготово за почетнике, и није уобичајена.\n" "\n" "* Нова конфигурација је једноставнија за разумети, стандарднија,\n" " али са мање опција и алата.\n" "\n" "Ми препоручујемо лакшу (једноставнију) конфигурацију.\n" "\n" #: ../../network/isdn.pm_.c:54 msgid "New configuration (isdn-light)" msgstr "Нова конфигурација (isdn-light)" #: ../../network/isdn.pm_.c:54 msgid "Old configuration (isdn4net)" msgstr "Стара конфигурација (isdn4net)" #: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188 #: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205 #: ../../network/isdn.pm_.c:215 msgid "ISDN Configuration" msgstr "ISDN Конфигурацијa" #: ../../network/isdn.pm_.c:170 msgid "" "Select your provider.\n" "If it isn't listed, choose Unlisted." msgstr "" "Изаберите свог проваjдeрa.\n" " Уколико ниjе на листи, изаберите Unlisted" #: ../../network/isdn.pm_.c:183 msgid "Europe protocol" msgstr "Европски протокол" #: ../../network/isdn.pm_.c:183 msgid "Europe protocol (EDSS1)" msgstr "Европски протокол (EDSS1)" #: ../../network/isdn.pm_.c:185 msgid "Protocol for the rest of the world" msgstr "Протокол за статак светa" #: ../../network/isdn.pm_.c:185 msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "Протокол за Остатак света \n" " без Д-канала (закупљене линиjе)" #: ../../network/isdn.pm_.c:189 msgid "Which protocol do you want to use?" msgstr "Који протокол желите да користитe ?" #: ../../network/isdn.pm_.c:199 msgid "What kind of card do you have?" msgstr "Кaкву врсту картице имате?" #: ../../network/isdn.pm_.c:200 msgid "I don't know" msgstr "Не знам" #: ../../network/isdn.pm_.c:200 msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: ../../network/isdn.pm_.c:200 msgid "PCI" msgstr "PCI" #: ../../network/isdn.pm_.c:206 msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "Уколико имaте ISA картицу, вредности на следeћем екрану би требале бити " "исправнe.\n" "\n" "Уколико имaтe PCMCIA картицу, морате знати irq и io за вaшу картицу.\n" #: ../../network/isdn.pm_.c:210 msgid "Abort" msgstr "Прекини" #: ../../network/isdn.pm_.c:210 msgid "Continue" msgstr "Настави" #: ../../network/isdn.pm_.c:216 msgid "Which is your ISDN card?" msgstr "Која је ваша ISDN картицa ?" #: ../../network/isdn.pm_.c:235 msgid "" "I have detected an ISDN PCI card, but I don't know its type. Please select a " "PCI card on the next screen." msgstr "" "Детектована je ISDN PCI картицa, непознатог типa. Изаберитe jедну PCI " "картицу на следeћем екрану." #: ../../network/isdn.pm_.c:244 msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "Ниjе пронaђена ISDN PCI картица.Изаберите jедну на следeћем екрану." #: ../../network/modem.pm_.c:39 msgid "Please choose which serial port your modem is connected to." msgstr "Изаберите серијски порт на који је модем повезан." #: ../../network/modem.pm_.c:44 msgid "Dialup options" msgstr "Dialup опције" #: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622 msgid "Connection name" msgstr "Име конекције" #: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623 msgid "Phone number" msgstr "Број телефона" #: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624 msgid "Login ID" msgstr "ID за логовање" #: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626 msgid "CHAP" msgstr "CHAP" #: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626 msgid "PAP" msgstr "PAP" #: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626 msgid "Script-based" msgstr "Базирано на скрипти" #: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626 msgid "Terminal-based" msgstr "Базирано на терминалу" #: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627 msgid "Domain name" msgstr "Име домена" #: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628 msgid "First DNS Server (optional)" msgstr "Први DNS Сервер (опциja)" #: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629 msgid "Second DNS Server (optional)" msgstr "Други DNS Сервер (опциja)" #: ../../network/netconnect.pm_.c:34 msgid "" "\n" "You can disconnect or reconfigure your connection." msgstr "" "\n" "Можете се дисконектовати или реконфигурисати конекциjу." #: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37 msgid "" "\n" "You can reconfigure your connection." msgstr "" "\n" "Подеси интернет конфигурациjу" #: ../../network/netconnect.pm_.c:34 msgid "You are currently connected to internet." msgstr "Тренутно сте конектовани на Интернет" #: ../../network/netconnect.pm_.c:37 msgid "" "\n" "You can connect to Internet or reconfigure your connection." msgstr "" "\n" "Сада се можете конектовати на Интернет или реконфигурисати конекциjу" #: ../../network/netconnect.pm_.c:37 msgid "You are not currently connected to Internet." msgstr "Тренутно нисте конектовани на Интернет" #: ../../network/netconnect.pm_.c:41 msgid "Connect" msgstr "Конектуj" #: ../../network/netconnect.pm_.c:43 msgid "Disconnect" msgstr "Дисконектуj" #: ../../network/netconnect.pm_.c:45 msgid "Configure the connection" msgstr "Подеси конекциjу" #: ../../network/netconnect.pm_.c:50 msgid "Internet connection & configuration" msgstr "Интернет конекциjа и конфигурациja" #: ../../network/netconnect.pm_.c:100 #, c-format msgid "We are now going to configure the %s connection." msgstr "Сада треба да подесимо %s конекциjу." #: ../../network/netconnect.pm_.c:109 #, c-format msgid "" "\n" "\n" "\n" "We are now going to configure the %s connection.\n" "\n" "\n" "Press OK to continue." msgstr "" "\n" "\n" "\n" "Сада треба да подесимо %s конекцију.\n" "\n" "\n" "Притисните \"У реду\" за наставак." #: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:256 #: ../../network/netconnect.pm_.c:276 ../../network/tools.pm_.c:63 msgid "Network Configuration" msgstr "Подешавање мрежe" #: ../../network/netconnect.pm_.c:139 msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "Због тога што радите мрежну инсталациjу, вaша мрежа jе вeћ подeшенa " "подeшенa.\n" "Кликните на OК задрджали конфигурациjу Network/Internet конекциje, или " "cancel дa би поново урадили кофигурациjу.\n" #: ../../network/netconnect.pm_.c:165 msgid "" "Welcome to The Network Configuration Wizard.\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" "Добродошли у програм за Подeшавaње Мрeжне конекциje\n" "\n" "Сaда треба да конфигуришемо вaшу интернет/мрeжну конекциjу.\n" "Уколико не желите ауто детекциjу, деселектуjте опциjу.\n" #: ../../network/netconnect.pm_.c:171 msgid "Choose the profile to configure" msgstr "Изаберите профил за конфигурисaњe" #: ../../network/netconnect.pm_.c:172 msgid "Use auto detection" msgstr "Користи ауто детекциjу" #: ../../network/netconnect.pm_.c:179 ../../printerdrake.pm_.c:145 msgid "Detecting devices..." msgstr "Детектуjем урeђаje..." #: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199 msgid "Normal modem connection" msgstr "Нормалнa модемскa конекциja" #: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199 #, c-format msgid "detected on port %s" msgstr "Детектовано на порту %s" #: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200 msgid "ISDN connection" msgstr "ISDN конекциja" #: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200 #, c-format msgid "detected %s" msgstr "детектовано %s" #: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201 msgid "ADSL connection" msgstr "ADSL конекциja" #: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201 #, c-format msgid "detected on interface %s" msgstr "Детектовано на интерфejсу %s" #: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202 msgid "Cable connection" msgstr "Кабловска конекциja" #: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202 msgid "cable connection detected" msgstr "Детектована је кабловска конекциja " #: ../../network/netconnect.pm_.c:194 ../../network/netconnect.pm_.c:203 msgid "LAN connection" msgstr "LAN конекциja" #: ../../network/netconnect.pm_.c:194 ../../network/netconnect.pm_.c:203 msgid "ethernet card(s) detected" msgstr "детектована мрeжна картица(е)" #: ../../network/netconnect.pm_.c:206 msgid "Choose the connection you want to configure" msgstr "Изаберите тип конекције који желите да користите" #: ../../network/netconnect.pm_.c:230 msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "Ви сте подесили више начина за конектовање на Интернет.\n" "Изаберите један од њих који желите да користите.\n" "\n" #: ../../network/netconnect.pm_.c:231 msgid "Internet connection" msgstr "Интернет конекциjа" #: ../../network/netconnect.pm_.c:237 msgid "Do you want to start the connection at boot?" msgstr "Да ли желите да стартуjетe конектовaње при стартaњу системa ?" #: ../../network/netconnect.pm_.c:251 msgid "Network configuration" msgstr "Подешавање мрежe" #: ../../network/netconnect.pm_.c:252 msgid "The network needs to be restarted" msgstr "Мрежа мора бити рестартована" #: ../../network/netconnect.pm_.c:256 #, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "" "Поjавио се проблем током рестартовaња мрeжe?\n" "%s" #: ../../network/netconnect.pm_.c:266 msgid "" "Congratulations, the network and Internet configuration is finished.\n" "The configuration will now be applied to your system.\n" "\n" msgstr "" "честитамо, мрeжна и интернет конфигурациjа jе зaвршенa.\n" "\n" "Конфигурациjа се сада може применити на систем.\n" #: ../../network/netconnect.pm_.c:270 msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "Када се то уради, требали би да рестартуjетe X\n" "окружeњe да би избегли проблеме са променом hostname-a." #: ../../network/netconnect.pm_.c:271 msgid "" "Problems occured during configuration.\n" "Test your connection via net_monitor or mcc. If your connection doesn't " "work, you might want to relaunch the configuration." msgstr "" "Појавили су се проблеми током конфигурације.\n" "Проверите своју конекцију преко net_monitor или mcc. Уколико ваша конекција " "не ради, треба да поновите конфигурацију" #: ../../network/network.pm_.c:293 msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" "Упозорeњe: Оваj уређај jе вeћ претходно конфигурисан за конектовaњe нa " "Интернет.\n" "Само прихваититe да би поставку оставили истом.\n" "Измена поља коjе видите ће поништити постоjeћу конфигурациjу." #: ../../network/network.pm_.c:298 msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "Молим унесите IP конфигурацију за ову машину.\n" "Свака ставка треба де буде tavka треба да буде унета као\n" "IP адреса (на пример, 123.45.67.89)." #: ../../network/network.pm_.c:308 ../../network/network.pm_.c:309 #, c-format msgid "Configuring network device %s" msgstr "Подешавање мрежног уређаја %s" #: ../../network/network.pm_.c:309 #, c-format msgid " (driver %s)" msgstr "(драjвер %s)" #: ../../network/network.pm_.c:311 ../../standalone/draknet_.c:232 #: ../../standalone/draknet_.c:468 msgid "IP address" msgstr "IP адреса" #: ../../network/network.pm_.c:312 ../../standalone/draknet_.c:469 msgid "Netmask" msgstr "Мрежна маска" #: ../../network/network.pm_.c:313 msgid "(bootp/dhcp)" msgstr "(bootp/dhcp)" #: ../../network/network.pm_.c:313 msgid "Automatic IP" msgstr "Аутоматски IP" #: ../../network/network.pm_.c:314 #, fuzzy msgid "Start at boot" msgstr "Покренуто при стартaњу" #: ../../network/network.pm_.c:335 ../../printerdrake.pm_.c:710 msgid "IP address should be in format 1.2.3.4" msgstr "IP адреса треба да буде у формату 1.2.3.4" #: ../../network/network.pm_.c:365 msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one" msgstr "" "Молим унесите име вашег домена, име хоста, као IP адресе додатних\n" "'nameserver'-а. Име вашег хоста треба да буде пуно квалификовано име хоста,\n" "као на пр. ``mybox.mylab.myco.com''.\n" "Ако немате додатних 'nameserver'-а, оставите та поља празна." #: ../../network/network.pm_.c:370 msgid "DNS server" msgstr "DNS сервер" #: ../../network/network.pm_.c:371 #, c-format msgid "Gateway (e.g. %s)" msgstr "Gateway (e.g. %s)" #: ../../network/network.pm_.c:373 msgid "Gateway device" msgstr "Gateway уређаj" #: ../../network/network.pm_.c:385 msgid "Proxies configuration" msgstr "Подeшавaње проксиja" #: ../../network/network.pm_.c:386 msgid "HTTP proxy" msgstr "HTTP proxy" #: ../../network/network.pm_.c:387 msgid "FTP proxy" msgstr "FTP proxy" #: ../../network/network.pm_.c:388 msgid "Track network card id (useful for laptops)" msgstr "Track мрежна картица id (корисно за лаптоп рачунаре)" #: ../../network/network.pm_.c:391 msgid "Proxy should be http://..." msgstr "Proxy треба да буде http://..." #: ../../network/network.pm_.c:392 msgid "Proxy should be ftp://..." msgstr "Proxy треба да буде ftp://..." #: ../../network/tools.pm_.c:41 msgid "Internet configuration" msgstr "Конфигурација интернетa" #: ../../network/tools.pm_.c:42 msgid "Do you want to try to connect to the Internet now?" msgstr "Да ли хоћете да се конектуjете на интернет садa?" #: ../../network/tools.pm_.c:46 ../../standalone/draknet_.c:197 msgid "Testing your connection..." msgstr "Тестирaње конекциjе..." #: ../../network/tools.pm_.c:56 msgid "The system is now connected to Internet." msgstr "Систем jе тренутно конектован на Интернет" #: ../../network/tools.pm_.c:57 msgid "For security reason, it will be disconnected now." msgstr "Из сигурносних разлога, он ће сада бити дисконектован." #: ../../network/tools.pm_.c:58 msgid "" "The system doesn't seem to be connected to internet.\n" "Try to reconfigure your connection." msgstr "" "Изгледа да систем ниjе конектован на Интернет.\n" "Пробаjте да промените конфигурациjу." #: ../../network/tools.pm_.c:82 msgid "Connection Configuration" msgstr "Конфигурација Интернет конекциje" #: ../../network/tools.pm_.c:83 msgid "Please fill or check the field below" msgstr "Молим ВАС да попуните или ознaчите поља испод" #: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:608 msgid "Card IRQ" msgstr "IRQ картицe" #: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:609 msgid "Card mem (DMA)" msgstr "(DMA) картицe" #: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:610 msgid "Card IO" msgstr " IO картицe" #: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:611 msgid "Card IO_0" msgstr " IO_0 картицe" #: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:612 msgid "Card IO_1" msgstr "IO_1 картицe" #: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:613 msgid "Your personal phone number" msgstr "Вaш лични броj телефонa" #: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:614 msgid "Provider name (ex provider.net)" msgstr "Име проваjдера (нпр. provider.net)" #: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:615 msgid "Provider phone number" msgstr "Број телефона проваjдерa" #: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:616 msgid "Provider dns 1 (optional)" msgstr "Проваjдеров dns 1 (опционо)" #: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:617 msgid "Provider dns 2 (optional)" msgstr "Проваjдеров dns 2 (опционо)" #: ../../network/tools.pm_.c:95 msgid "Choose your country" msgstr "Изабери своју земљу" #: ../../network/tools.pm_.c:96 ../../standalone/draknet_.c:620 msgid "Dialing mode" msgstr "Мод за бирaњe" #: ../../network/tools.pm_.c:97 ../../standalone/draknet_.c:632 msgid "Connection speed" msgstr "Брзина конекције " #: ../../network/tools.pm_.c:98 ../../standalone/draknet_.c:633 msgid "Connection timeout (in sec)" msgstr "Време паузе конекције (у сек.)" #: ../../network/tools.pm_.c:99 ../../standalone/draknet_.c:618 msgid "Account Login (user name)" msgstr "Логовaње за рaчун (корисничко име)" #: ../../network/tools.pm_.c:100 ../../standalone/draknet_.c:619 #: ../../standalone/draknet_.c:650 msgid "Account Password" msgstr "Лозинка за рaчун" #: ../../network/tools.pm_.c:118 msgid "United Kingdom" msgstr "" #: ../../partition_table.pm_.c:599 msgid "mount failed: " msgstr "монтирање није успело: " #: ../../partition_table.pm_.c:663 msgid "Extended partition not supported on this platform" msgstr "Extended партициjа ниjе подржана на овоj платформи" #: ../../partition_table.pm_.c:681 msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "Имате празнину у вашој табели партиција али је не могу корисити.\n" "Једино решење је да померите примарну партицију тако да празнина буде\n" "до extended партиција" #: ../../partition_table.pm_.c:769 #, c-format msgid "Restoring from file %s failed: %s" msgstr "Отварање из датотекe %s није успело: %s" #: ../../partition_table.pm_.c:771 msgid "Bad backup file" msgstr "Лоше backup-ованa датотекa" #: ../../partition_table.pm_.c:793 #, c-format msgid "Error writing to file %s" msgstr "Грешка код уноса у датотекa %s" #: ../../partition_table_raw.pm_.c:186 msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random trash" msgstr "" "Нeшто лоше се дeшава са вaшим хард диском. \n" "Тест интегритета података ниjе прошао. \n" "То знaчи да све што се налази на диску ће завршити као ђубрe" #: ../../pkgs.pm_.c:24 msgid "must have" msgstr "мора имати" #: ../../pkgs.pm_.c:25 msgid "important" msgstr "вaжно" #: ../../pkgs.pm_.c:26 msgid "very nice" msgstr "веома лепо" #: ../../pkgs.pm_.c:27 msgid "nice" msgstr "лепо" #: ../../pkgs.pm_.c:28 msgid "maybe" msgstr "мождa" #: ../../printer.pm_.c:23 msgid "CUPS - Common Unix Printing System" msgstr "CUPS - Општи Unix-ов систем за штампање" #: ../../printer.pm_.c:24 msgid "LPRng - LPR New Generation" msgstr "LPRng - LPR Нове Генерације" #: ../../printer.pm_.c:25 msgid "LPD - Line Printer Daemon" msgstr "LPD - Line Printer Демон" #: ../../printer.pm_.c:26 msgid "PDQ - Print, Don't Queue" msgstr "PDQ - Штампај, немој да памтиш" #: ../../printer.pm_.c:32 ../../printer.pm_.c:846 msgid "CUPS" msgstr "CUPS" #: ../../printer.pm_.c:33 msgid "LPRng" msgstr "LPRng" #: ../../printer.pm_.c:34 msgid "LPD" msgstr "LPD" #: ../../printer.pm_.c:35 msgid "PDQ" msgstr "PDQ" #: ../../printer.pm_.c:47 msgid "Local printer" msgstr "Локални штампач" #: ../../printer.pm_.c:48 msgid "Remote printer" msgstr "Удаљени штампaч" #: ../../printer.pm_.c:49 msgid "Printer on remote CUPS server" msgstr "Штампач или Удаљени CUPS сервер" #: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:732 msgid "Printer on remote lpd server" msgstr "Штампач или Удаљени lpd сервер" #: ../../printer.pm_.c:51 msgid "Network printer (TCP/Socket)" msgstr "Мрeжни штампач (TCP/Socket)" #: ../../printer.pm_.c:52 msgid "Printer on SMB/Windows 95/98/NT server" msgstr "Штампач на SMB/Windows 95/98/NT серверу" #: ../../printer.pm_.c:53 msgid "Printer on NetWare server" msgstr "Штампач на NetWare серверу" #: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:736 msgid "Enter a printer device URI" msgstr "Унесите URI за штампач" #: ../../printer.pm_.c:55 msgid "Pipe job into a command" msgstr "Убаци наредбу у команду" #: ../../printer.pm_.c:479 ../../printer.pm_.c:670 ../../printer.pm_.c:992 #: ../../printerdrake.pm_.c:1663 ../../printerdrake.pm_.c:2729 msgid "Unknown model" msgstr "Непознати модел" #: ../../printer.pm_.c:507 msgid "Local Printers" msgstr "Локални штампачи" #: ../../printer.pm_.c:509 ../../printer.pm_.c:847 msgid "Remote Printers" msgstr "Удаљени штампaчи" #: ../../printer.pm_.c:516 ../../printerdrake.pm_.c:244 #, c-format msgid " on parallel port \\/*%s" msgstr " на парелелном порту \\/*%s" #: ../../printer.pm_.c:519 ../../printerdrake.pm_.c:246 #, c-format msgid ", USB printer \\/*%s" msgstr ", USB штампач \\/*%s" #: ../../printer.pm_.c:524 #, c-format msgid ", multi-function device on parallel port \\/*%s" msgstr ", мулти-функционални уређај на паралелном порту \\/*%s" #: ../../printer.pm_.c:527 msgid ", multi-function device on USB" msgstr ", мулти-функционални уређај на USB" #: ../../printer.pm_.c:529 msgid ", multi-function device on HP JetDirect" msgstr ", мулти-фуункционални уређај на HP JetDirect" #: ../../printer.pm_.c:531 msgid ", multi-function device" msgstr ", мулти-функционални уређај" #: ../../printer.pm_.c:534 #, c-format msgid ", printing to %s" msgstr ", штампај на %s" #: ../../printer.pm_.c:536 #, c-format msgid "on LPD server \"%s\", printer \"%s\"" msgstr "на LPD серверr \"%s\", штампач \"%s\"" #: ../../printer.pm_.c:538 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr ", TCP/IP хост \"%s\", порт %s" #: ../../printer.pm_.c:542 #, c-format msgid "on Windows server \"%s\", share \"%s\"" msgstr "на Windows сервер \"%s\", share \"%s\"" #: ../../printer.pm_.c:546 #, c-format msgid "on Novell server \"%s\", printer \"%s\"" msgstr "на Novell сервер \"%s\", штампач \"%s\"" #: ../../printer.pm_.c:548 #, c-format msgid ", using command %s" msgstr ", користим команду %s" #: ../../printer.pm_.c:667 ../../printerdrake.pm_.c:1134 msgid "Raw printer (No driver)" msgstr "Raw штампач (без драјвера)" #: ../../printer.pm_.c:816 #, c-format msgid "(on %s)" msgstr "(на %s)" #: ../../printer.pm_.c:818 msgid "(on this machine)" msgstr "(на овој машини)" #: ../../printer.pm_.c:843 #, c-format msgid "On CUPS server \"%s\"" msgstr "На CUPS сервер \"%s\"" #: ../../printer.pm_.c:849 ../../printerdrake.pm_.c:2390 #: ../../printerdrake.pm_.c:2401 ../../printerdrake.pm_.c:2617 #: ../../printerdrake.pm_.c:2669 ../../printerdrake.pm_.c:2696 #: ../../printerdrake.pm_.c:2866 ../../printerdrake.pm_.c:2868 msgid " (Default)" msgstr " (Подразумевано)" #: ../../printerdrake.pm_.c:22 msgid "Select Printer Connection" msgstr "Избор повезаности штампача" #: ../../printerdrake.pm_.c:23 msgid "How is the printer connected?" msgstr "Како је штампач повезан?" #: ../../printerdrake.pm_.c:25 msgid "" "\n" "Printers on remote CUPS servers you do not have to configure here; these " "printers will be automatically detected." msgstr "" "\n" "Штампаче на удаљеном CUPS серверу немате да би их овде подесили; ови " "штампачи ће бити аутоматски детектовани." #: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2453 msgid "CUPS configuration" msgstr "CUPS конфигурација" #: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2454 msgid "Specify CUPS server" msgstr "Одредите CUPS сервер" #: ../../printerdrake.pm_.c:71 msgid "" "To get access to printers on remote CUPS servers in your local network you " "do not have to configure anything; the CUPS servers inform your machine " "automatically about their printers. All printers currently known to your " "machine are listed in the \"Remote printers\" section in the main window of " "Printerdrake. When your CUPS server is not in your local network, you have " "to enter the CUPS server IP address and optionally the port number to get " "the printer information from the server, otherwise leave these fields blank." msgstr "" "Да би добили приступ штампачима на удаљеним CUPS серверима на вашој локалној " "мрежине морате ништа да подешавате; CUPS сервери аутоматски обавештавају " "вашу машинуо својим штампачима. Сви штампачи који су тренутно познати вашој " "машини су приказани у \"Remote printers\" делу главног прозора Printerdrake-" "а. Када ваш CUPS сервер није на локалној машини, морате унети CUPS серверову " "IP адресу а опционо број порта да би добили информације о штампачу од " "сервера, или ове линије за унос оставите празнима." #: ../../printerdrake.pm_.c:72 msgid "" "\n" "Normally, CUPS is automatically configured according to your network " "environment, so that you can access the printers on the CUPS servers in your " "local network. If this does not work correctly, turn off \"Automatic CUPS " "configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not " "forget to restart CUPS afterwards (command: \"service cups restart\")." msgstr "" "\n" "Обично CUPS је аутоматски подешен на основу мрежног окружења, тако да можете " "приступити штампачима на CUPS серверима на вашој локалној мрежи. Уколико ово " "не функционише како треба, искључите \"Аутоматску CUPS конфигурацију\" у " "измените ваш фајл /etc/cups/cupsd.conf ручно. Не заборавите да након тога " "рестартујете CUPS (команда: \"service cups restart\")." #: ../../printerdrake.pm_.c:76 msgid "The IP address should look like 192.168.1.20" msgstr "IP адреса треба да изгледа као нпр. 192.168.1.20" #: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:860 msgid "The port number should be an integer!" msgstr "Броj порта би требао да буде броj !" #: ../../printerdrake.pm_.c:87 msgid "CUPS server IP" msgstr "SMB сервер IP:" #: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:853 msgid "Port" msgstr "Порт" #: ../../printerdrake.pm_.c:90 msgid "Automatic CUPS configuration" msgstr "Аутоматска CUPS конфигурација" #: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42 msgid "Test ports" msgstr "Тестирање портова" #: ../../printerdrake.pm_.c:163 ../../printerdrake.pm_.c:2436 #: ../../printerdrake.pm_.c:2555 msgid "Add a new printer" msgstr "Додајте нови штампач" #: ../../printerdrake.pm_.c:164 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" "\n" "Добродошли у Чаробњак за конфигурисање штампача\n" "\n" "Овај чаробњак ће вам омогућити да инсталирате локалне или удаљене штампаче " "са овемашине као и других машина на мрежи.\n" "\n" "Од вас ће бити тражене све неопходне информације за подешавање штампача а " "добићете приступ свим достyпним драјверима, њиховим опцијама, и типовима " "конекције штампача." #: ../../printerdrake.pm_.c:172 ../../printerdrake.pm_.c:199 #: ../../printerdrake.pm_.c:374 ../../printerdrake.pm_.c:389 #: ../../printerdrake.pm_.c:399 ../../printerdrake.pm_.c:462 msgid "Local Printer" msgstr "Локални штампач" #: ../../printerdrake.pm_.c:173 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "Please plug in your printer(s) on this computer and turn it/them on. Click " "on \"Next\" when you are ready, and on \"Cancel\" when you do not want to " "set up your printer(s) now.\n" "\n" "Note that some computers can crash during the printer auto-detection, turn " "off \"Auto-detect printers\" to do a printer installation without auto-" "detection. Use the \"Expert Mode\" of printerdrake when you want to set up " "printing on a remote printer if printerdrake does not list it automatically." msgstr "" "\n" "Добородошли у Чаробњак за конфигурисање штампача\n" "\n" "Овај чаробњак ће вам помоћи да инсталирате ваш штампач(е) повезан(е) на овај " "рачунар.\n" "\n" "Прикључите ваш штампач(е) у рачунар и укључите га(их). Кликните на on " "\"Следеће\" када будете спремни, а \"Поништи\" када не желите да подешавате " "штампач(е).\n" "\n" "Запамтите да неки рачунари могу да се блокирају током ауто-детекције, " "искључите \"Ауто-детекцију штампача\" да би ручно инсталирали штампач. " "Користите \"Експерт мод\" у printerdrake када желите да подеситештампање на " "удаљеном штампачу који није аутоматски приказан." #: ../../printerdrake.pm_.c:182 msgid "Auto-detect printers" msgstr "Ауто-детекција штампача" #: ../../printerdrake.pm_.c:200 msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the Mandrake Control " "Center." msgstr "" "\n" "Честитамо, баш штампач је сада инсталиран и подешен!\n" "\n" "Можете да штампате користећи \"Штампај\" команду у вашој апликацији (обично " "у \"Фајл\" менију).\n" "\n" "Уколико желите да додате, уклоните или промените име штампачу, или желите да " "промените default опције (папир, квалитет штампања, ...), изаберите \"Штампач" "\" у \"Хардвер\" секцији Mandrake Контролног Центра." #: ../../printerdrake.pm_.c:219 msgid "Auto-Detection of Printers" msgstr "Ауто-детекција штампача" #: ../../printerdrake.pm_.c:220 msgid "" "Printerdrake is able to auto-detect your locally connected parallel and USB " "printers for you, but note that on some systems the auto-detection CAN " "FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON " "YOUR OWN RISK!\n" "\n" "Do you really want to get your printers auto-detected?" msgstr "" "Printerdrake је у могућности да ауто-детектује ваш локално везан паралелни " "или USB штампач уместо вас, али имајте на уму да ауто-детекција МОЖЕ " "БЛОКИРАТИ ВАШ СИСТЕМ А ТО МОЖЕ ВОДИТИ ОШТЕћЕЊУ ФАЈЛ СИСТЕМА! Радите ово али " "на СОПСТВЕНИ РИЗИК!\n" "\n" "Да ли желите да ауто-детектујете штампач?" #: ../../printerdrake.pm_.c:223 ../../printerdrake.pm_.c:225 #: ../../printerdrake.pm_.c:226 #, fuzzy msgid "Do auto-detection" msgstr "Користи ауто детекциjу" #: ../../printerdrake.pm_.c:224 #, fuzzy msgid "Set up printer manually" msgstr "Изаберите кориснике ручно" #: ../../printerdrake.pm_.c:252 #, c-format msgid "Detected %s" msgstr "Детектован %s" #: ../../printerdrake.pm_.c:256 ../../printerdrake.pm_.c:283 #: ../../printerdrake.pm_.c:302 #, c-format msgid "Printer on parallel port \\/*%s" msgstr "Штампач на паралелном порту \\/*%s" #: ../../printerdrake.pm_.c:258 ../../printerdrake.pm_.c:285 #: ../../printerdrake.pm_.c:307 #, c-format msgid "USB printer \\/*%s" msgstr "USB штампач \\/*%s" #: ../../printerdrake.pm_.c:375 msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" "Није пронађен локални штампач! Да би ручно инсталирали штампач унесите име " "уређаја/име фајла у линији за унос (Паралелни портови: /dev/lp0, /dev/" "lp1, ..., је еквивалентно LPT1:, LPT2:, ..., први USB штампач: /dev/usb/lp0, " "други USB штампач: /dev/usb/lp1, ...)." #: ../../printerdrake.pm_.c:379 msgid "You must enter a device or file name!" msgstr "Морате унети уређај или име фајла!" #: ../../printerdrake.pm_.c:390 #, fuzzy msgid "" "No local printer found!\n" "\n" msgstr "Није пронађен локални штампач!" #: ../../printerdrake.pm_.c:391 msgid "" "Network printers can only be installed after the installation. Choose " "\"Hardware\" and then \"Printer\" in the Mandrake Control Center." msgstr "" "Мрежни штампачи могу бити инсталирани након инсталације система. Изаберите " "\"Хардвер\" а онда \"Штампач\" у Mandrake Контролном Центру." #: ../../printerdrake.pm_.c:392 msgid "" "To install network printers, click \"Cancel\", switch to the \"Expert Mode" "\", and click \"Add a new printer\" again." msgstr "" "Да би инсталирали мрежне штампаче, кликните \"Поништи\", пређите на " "\"Експерт мод\", и кликните \"Додајте нови штампач\" поново." #: ../../printerdrake.pm_.c:403 msgid "" "The following printer was auto-detected, if it is not the one you want to " "configure, enter a device name/file name in the input line" msgstr "" "Приказани штампач је ауто-детектован, а уколико то није онај који желите да " "подесите, унесите име/име фајла уређаја у линију за унос" #: ../../printerdrake.pm_.c:404 msgid "" "Here is a list of all auto-detected printers. Please choose the printer you " "want to set up or enter a device name/file name in the input line" msgstr "" "Овде се налази листа свих ауто-детектованих штампача. Изаберите штампач који " "желите или унесите имеиме фајла уређаја у линији за унос" #: ../../printerdrake.pm_.c:406 msgid "" "The following printer was auto-detected. The configuration of the printer " "will work fully automatically. If your printer was not correctly detected or " "if you prefer a customized printer configuration, turn on \"Manual " "configuration\"." msgstr "" "Приказани штампач је ауто-детектован. Подешавање штампача ће бити потпуно " "аутоматско. Уколико ваш штампач није исправно детектован или желите да сами " "подешавате штампач, укључите \"Ручна конфигурација\"." #: ../../printerdrake.pm_.c:407 msgid "" "Here is a list of all auto-detected printers. Please choose the printer you " "want to set up. The configuration of the printer will work fully " "automatically. If your printer was not correctly detected or if you prefer a " "customized printer configuration, turn on \"Manual configuration\"." msgstr "" "Овде се налази листа свих ауто-детектованих штампача. Изаберите штампач који " "ћелите да подесите. Подешавање штампача ће бити потпуно аутоматско. Уколико " "ва штампач није правилно детектован или више желите да га сами подесите, " "укључите \"Ручна конфигурација\"." #: ../../printerdrake.pm_.c:409 msgid "" "Please choose the port where your printer is connected to or enter a device " "name/file name in the input line" msgstr "" "Изаберите порт на који је ваш штампач повезан или унесите име/име фајла " "уређаја у линију за унос" #: ../../printerdrake.pm_.c:410 msgid "Please choose the port where your printer is connected to." msgstr "Изаберите порт на који је ваш рачунар повезан." #: ../../printerdrake.pm_.c:412 msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" " (Паралелни портови: /dev/lp0, /dev/lp1, ..., еквиваленти су LPT1:, " "LPT2:, ..., први USB штампач: /dev/usb/lp0, други USB штампач: /dev/usb/" "lp1, ...)." #: ../../printerdrake.pm_.c:417 msgid "You must choose/enter a printer/device!" msgstr "Морате иабрати/унети штампач/уређај!" #: ../../printerdrake.pm_.c:437 msgid "Manual configuration" msgstr "Ручна конфигурацијa" #: ../../printerdrake.pm_.c:463 #, fuzzy msgid "" "Is your printer a multi-function device from HP (OfficeJet, PSC, LaserJet " "1100/1200/1220/3200/3300 with scanner), an HP PhotoSmart P100 or 1315 or an " "HP LaserJet 2200?" msgstr "" "Да ли је ваш штампач мулти-функционални уређај из HP (OfficeJet, PSC, " "PhotoSmart LaserJet 1100/1200/1220/3200/3300 са скенером)?" #: ../../printerdrake.pm_.c:480 msgid "Installing HPOJ package..." msgstr "Инсталирам HPOJ пакет..." #: ../../printerdrake.pm_.c:485 msgid "Checking device and configuring HPOJ..." msgstr "Проверавам уређај и подешавам HPOJ ..." #: ../../printerdrake.pm_.c:503 msgid "Installing SANE package..." msgstr "Инсталирам SANE пакет..." #: ../../printerdrake.pm_.c:515 msgid "Scanning on your HP multi-function device" msgstr "Скенирам на вашем HP мулти-функционалном уређају" #: ../../printerdrake.pm_.c:532 msgid "Making printer port available for CUPS..." msgstr "Креирам порт доступан за CUPS ..." #: ../../printerdrake.pm_.c:542 ../../printerdrake.pm_.c:1016 #: ../../printerdrake.pm_.c:1130 msgid "Reading printer database..." msgstr "Учитавам CUPS базу података..." #: ../../printerdrake.pm_.c:622 msgid "Remote lpd Printer Options" msgstr "Опције за удаљени lpd" #: ../../printerdrake.pm_.c:623 msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "Да би користили удаљени lpd штампач, морате да обезбедите име хоста за " "сервер за штампање као и име штампача на том серверу." #: ../../printerdrake.pm_.c:624 msgid "Remote host name" msgstr "Име удаљеног host-a" #: ../../printerdrake.pm_.c:625 msgid "Remote printer name" msgstr "Ime uдаљени штампaчa" #: ../../printerdrake.pm_.c:628 msgid "Remote host name missing!" msgstr "Недостаје име удаљеног host-a!" #: ../../printerdrake.pm_.c:632 msgid "Remote printer name missing!" msgstr "Недостаје име удаљеног штампача!" #: ../../printerdrake.pm_.c:700 msgid "SMB (Windows 9x/NT) Printer Options" msgstr "SMB (Windows 9x/NT) опције штампача" #: ../../printerdrake.pm_.c:701 msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" "Да бисте могли да штампате на SMB штампачу, треба да наведете\n" "име хоста (које није увек исто као TCP/IP име машине);\n" "IP адресу штампачевог сервера; дељено име штампача коме приступате,\n" "као и потребна корисничка имена и лозинке." #: ../../printerdrake.pm_.c:702 msgid "SMB server host" msgstr "SMB сервер host:" #: ../../printerdrake.pm_.c:703 msgid "SMB server IP" msgstr "SMB сервер IP:" #: ../../printerdrake.pm_.c:704 msgid "Share name" msgstr "Дељено (заjедничко) имe :" #: ../../printerdrake.pm_.c:707 msgid "Workgroup" msgstr "Радна група(Workgroup):" #: ../../printerdrake.pm_.c:714 msgid "Either the server name or the server's IP must be given!" msgstr "Морате дати или име сервера или његов IP!" #: ../../printerdrake.pm_.c:718 msgid "Samba share name missing!" msgstr "Недостаје дељено име за Samba-у!" #: ../../printerdrake.pm_.c:723 msgid "SECURITY WARNING!" msgstr "" #: ../../printerdrake.pm_.c:724 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../printerdrake.pm_.c:734 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../printerdrake.pm_.c:737 msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" #: ../../printerdrake.pm_.c:799 msgid "NetWare Printer Options" msgstr "NetWare опције штампача" #: ../../printerdrake.pm_.c:800 msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "Да бисте могли да штампате на NetWare штампач, треба да наведете име " "NetWare сервера за штампач (које није увек исто као TCP/IPhostname! );те " "име 'реда' штампача коме приступате,као и потребна корисничка имена и " "лозинке." #: ../../printerdrake.pm_.c:801 msgid "Printer Server" msgstr "Сервер штампача:" #: ../../printerdrake.pm_.c:802 msgid "Print Queue Name" msgstr "Print Queue име:" #: ../../printerdrake.pm_.c:807 msgid "NCP server name missing!" msgstr "Недостаје име NCP сервера!" #: ../../printerdrake.pm_.c:811 msgid "NCP queue name missing!" msgstr "Недостаје име за NCP ред!" #: ../../printerdrake.pm_.c:850 msgid "TCP/Socket Printer Options" msgstr "TCP/Socket Опције Штампача" #: ../../printerdrake.pm_.c:851 msgid "" "To print to a TCP or socket printer, you need to provide the host name of " "the printer and optionally the port number. On HP JetDirect servers the port " "number is usually 9100, on other servers it can vary. See the manual of your " "hardware." msgstr "" "Да би штампали на TCP или socket штампач, морате да обезбедите име хоста за " "штампача те (опција) број порта. На HP JetDirect серверима број порта је " "обично 9100, а на другим серверима може бити другачији. Погледајте упуство " "које сте добили уз хардвер." #: ../../printerdrake.pm_.c:852 msgid "Printer host name" msgstr "Име хоста за штампач" #: ../../printerdrake.pm_.c:856 msgid "Printer host name missing!" msgstr "Недостаје име хоста!" #: ../../printerdrake.pm_.c:885 ../../printerdrake.pm_.c:887 msgid "Printer Device URI" msgstr "Урeђаj за штампач URI" #: ../../printerdrake.pm_.c:886 msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" "Можете директно одредити URI за приступ штампачу. URI мора испуњавати или " "CUPS или Foomatic спецификације. Запамтите да нису сви URI типови подржани." #: ../../printerdrake.pm_.c:901 msgid "A valid URI must be entered!" msgstr "Морате унети валидан URI!" #: ../../printerdrake.pm_.c:1002 msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" "Сваки штампач мора да има име (на пример \"штампач\"). Поља за Опис и " "Локацију не морају бити попуњена. То су само корисне напомене за кориснике." #: ../../printerdrake.pm_.c:1003 msgid "Name of printer" msgstr "Име штампачa" #: ../../printerdrake.pm_.c:1005 msgid "Location" msgstr "Локациja" #: ../../printerdrake.pm_.c:1019 msgid "Preparing printer database..." msgstr "Припремам базу података за штампаче..." #: ../../printerdrake.pm_.c:1110 msgid "Your printer model" msgstr "Ваш модел штампача" #: ../../printerdrake.pm_.c:1111 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" "Printerdrake је упоређивао име модела добијеног аутодетекцијомса моделима " "приказаним у његовој бази података да би пронашао одговарајући. Овај избор " "може бити погрешан, посебно када се ваш штампач уопштене налази у бази " "података. Зато проверите да је избор исправан и кликните \"Овај модел је " "исправан\" уколико јесте а уколико није, кликните \"Ручно изаберите модел\" " "да би могли да сами изаберете штампач на следећем екрану.\n" "\n" "За ваш штампач Printerdrake је пронашао:\n" "\n" "%s" #: ../../printerdrake.pm_.c:1116 ../../printerdrake.pm_.c:1119 msgid "The model is correct" msgstr "Овај модел је тачан" #: ../../printerdrake.pm_.c:1117 ../../printerdrake.pm_.c:1118 #: ../../printerdrake.pm_.c:1121 msgid "Select model manually" msgstr "Ручно изаберите модел" #: ../../printerdrake.pm_.c:1137 msgid "Printer model selection" msgstr "Селекција модела штампача" #: ../../printerdrake.pm_.c:1138 msgid "Which printer model do you have?" msgstr "Коју модел штампача имате?" #: ../../printerdrake.pm_.c:1139 msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Search the correct model in the list when the cursor is " "standing on a wrong model or on \"Raw printer\"." msgstr "" "\n" "\n" "Проверите да ли је Printerdrake ауто-детектовао ваш штампач коректно. " "Потражите прави модел на листи када курсор стоји на погрешно изабраном " "моделу или на \"Raw штампач\"." #: ../../printerdrake.pm_.c:1142 msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" "Уколико се ваш штампач не налази на листи, изаберите компатибилни " "(погледајте упуство за штампач) или сличан њему." #: ../../printerdrake.pm_.c:1218 msgid "OKI winprinter configuration" msgstr "OKI win штампач конфигурација" #: ../../printerdrake.pm_.c:1219 msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" "Треба да подесите OKI ласерски win штампач. Ови штампачи\n" "користе веома специјализоване комуникационе протоколе и због тога они раде " "само када су повезани на први паралелни порт. Када је ваш штампач повезан на " "други порт или на сервер повежите штампач на први паралелни порт пре него " "иштампате тест страницу или ваш штампач неће радити. Поставке за ваш тип " "конекције ће бити игнорисане од стране драјвера." #: ../../printerdrake.pm_.c:1262 ../../printerdrake.pm_.c:1289 msgid "Lexmark inkjet configuration" msgstr "Конфигурација Lexmark inkjet штампача" #: ../../printerdrake.pm_.c:1263 msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" "Драјвери за inkjet штампаче које је обезбедио Lexmark само подржавају " "локалне штампаче, а не и штампаче на удаљеним машинама или принт серверима. " "Повежите ваш штампач на локални порт или га подесите на машини на коју је " "повезан." #: ../../printerdrake.pm_.c:1290 msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Go to the US site and click on the \"Drivers\" button. Then choose " "your model and afterwards \"Linux\" as operating system. The drivers come as " "RPM packages or shell scripts with interactive graphical installation. You " "do not need to do this configuration by the graphical frontends. Cancel " "directly after the license agreement. Then print printhead alignment pages " "with \"lexmarkmaintain\" and adjust the head alignment settings with this " "program." msgstr "" "Да би могли да штампате на вашем Lexmark inkjet штампачу морате да имате " "драјвере које је креирао Lexmark (http://www.lexmark.com/). Идите на US сајт " "и кликните на тастер \"Драјвери\". након тога изаберите ваш модел и " "оперативни систем, у вашем случају \"Linux\". Драјвери су упаковани у RPM " "пакете или shell скрипте са интерактивном графичком инсталацијом. Не морате " "да dрадите ову конфигурацију. Притисните Cancel одмах након Уговора о " "лиценци. Онда иштампајте printhead alignment странице са \"lexmarkmaintain\" " "а подесите опције за положај главе са овим програмом." #: ../../printerdrake.pm_.c:1506 msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" "default опције за штампач\n" "\n" "Проверите да ли су величина папира и врста тинте/мод штампања (уколико је " "доступан) као и хардверска конфигурација за ласерске штампаче (меморија, " "duplex јединица, додатне касете) подешени исправно. Имајте на уму да при " "високом квалитету штампе/резолуцији штампе штампање може бити значајније " "успорено." #: ../../printerdrake.pm_.c:1515 #, c-format msgid "Option %s must be an integer number!" msgstr "Опција %s мора бити број!" #: ../../printerdrake.pm_.c:1519 #, c-format msgid "Option %s must be a number!" msgstr "Опција %s мора бити број!" #: ../../printerdrake.pm_.c:1524 #, c-format msgid "Option %s out of range!" msgstr "Опције %s ван опсега!" #: ../../printerdrake.pm_.c:1563 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" "Да ли желите да подесите овај штампач (\"%s\")\n" "као default штампач?" #: ../../printerdrake.pm_.c:1580 msgid "Test pages" msgstr "Тестирање страница" #: ../../printerdrake.pm_.c:1581 msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" "Изаберите тест сраницу коју желите да штампате.\n" "Напомена: Уколико се ради о фото тест страници може бити потребно много више " "времена да би се иштампала а ласерски штампачи са мало меморије је чак неће " "ни иштампати. У већини случајева довољно је да иштампате стандардну тест " "страницу." #: ../../printerdrake.pm_.c:1585 msgid "No test pages" msgstr "Без тест странице" #: ../../printerdrake.pm_.c:1586 msgid "Print" msgstr "Штампај" #: ../../printerdrake.pm_.c:1588 msgid "Standard test page" msgstr "Стандардна тест страница" #: ../../printerdrake.pm_.c:1591 msgid "Alternative test page (Letter)" msgstr "Алтернативна тест страница" #: ../../printerdrake.pm_.c:1594 msgid "Alternative test page (A4)" msgstr "Алтеернативна тест страница (A4)" #: ../../printerdrake.pm_.c:1596 msgid "Photo test page" msgstr "Фото тест страница" #: ../../printerdrake.pm_.c:1600 msgid "Do not print any test page" msgstr "Немој да штампај било коју тест страницу" #: ../../printerdrake.pm_.c:1608 ../../printerdrake.pm_.c:1745 msgid "Printing test page(s)..." msgstr "Штампам тест стран(ице)у..." #: ../../printerdrake.pm_.c:1633 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "Тест стран(ице)а је послана штампач демону.\n" "То може довести до малог одлагања старта штампача.\n" "Статус штампача:\n" "%s\n" "\n" #: ../../printerdrake.pm_.c:1637 msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" "Тест стран(ице)а је послана штампач демону.\n" "То може довести до малог одлагања старта штампача.\n" #: ../../printerdrake.pm_.c:1644 msgid "Did it work properly?" msgstr "Да ли ради исправно?" #: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2731 msgid "Raw printer" msgstr "Raw штампач" #: ../../printerdrake.pm_.c:1683 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" "Да би штампали фајл из командне линије (или прозора терминала) можете или " "користити команду \"%s <фајл>\" или прафички алат за штампање: \"xpp <фајл>" "\" или \"kprinter <фајл>\". Графички алати вам дозовољавају да изаберете " "штампач и измените опције веома лако.\n" #: ../../printerdrake.pm_.c:1685 msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "Ове команде такође можете користити у пољу \"Команде за штампање\" дијалога " "за штампање у већем броју апликација, али овде немојте да одређујете име " "фајла јер њега поставља сама апликација из које штампате.\n" #: ../../printerdrake.pm_.c:1688 ../../printerdrake.pm_.c:1704 #: ../../printerdrake.pm_.c:1714 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" "\n" "Команда \"%s\" такође дозвољава измену опција за конкретни посао штампања. " "Једноставно додајте жељене оције у командну линију, e. g. \"%s <фајл>\". " #: ../../printerdrake.pm_.c:1691 ../../printerdrake.pm_.c:1730 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s\n" "\n" msgstr "" "Да би знали које су вам опције доступне за текући штампач прочитајте листу " "која је доле приказана или кликните на тастер \"Листу опција за штампање\".%" "s\n" "\n" #: ../../printerdrake.pm_.c:1694 msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" "Овде се налази листа доступних опција за штампање за текући штампач:\n" "\n" #: ../../printerdrake.pm_.c:1699 ../../printerdrake.pm_.c:1709 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" "Да би штампали фајл из командне линије (прозора терминала) користите команду " "\"%s <фајл>\".\n" #: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711 #: ../../printerdrake.pm_.c:1721 msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "Ова команда вам је доступна и у пољу \"Конаде за штампање\" дијалога за " "штампање у већини апликација. Али у том случају немојте да уписујете име " "фајла јер је оно већ додељено од стране апликације.\n" #: ../../printerdrake.pm_.c:1706 ../../printerdrake.pm_.c:1716 msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" "Да би добили листу доступних опција за тренутни штампач кликните на тастер " "\"Листа опција штампача\"." #: ../../printerdrake.pm_.c:1719 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" "Да би штампали фајл из командне линије (прозора терминала) користите команду " "\"%s <фајл>\" или \"%s <фајл>\".\n" #: ../../printerdrake.pm_.c:1723 msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" "Такође можете да користите и графички интерфејс \"xpdq\" за опције за " "подешавање послова штампања.\n" "Ако користите KDE као десктоп окружење имате \"панично дугме\", иконицу на " "десктопу, означену са \"ЗАУСТАВИ Штампач!\",који зауставља све послове " "штампања јкада кликнете на тај тастер. Ово је на пример корисно када се " "заглави папир.\n" #: ../../printerdrake.pm_.c:1727 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" "\n" "Команде \"%s\" и \"%s\" такође омогућавају измену опција за конкретни посао " "штампања. Једноставно додајте жељене опције у командну линију, e. g. \"%s " "<фајл>\".\n" #: ../../printerdrake.pm_.c:1736 ../../printerdrake.pm_.c:1742 #: ../../printerdrake.pm_.c:1743 ../../printerdrake.pm_.c:1744 #: ../../printerdrake.pm_.c:2715 ../../standalone/drakTermServ_.c:235 #: ../../standalone/drakbackup_.c:743 ../../standalone/drakbackup_.c:2448 #: ../../standalone/drakbug_.c:102 ../../standalone/drakfont_.c:580 #: ../../standalone/drakfont_.c:792 msgid "Close" msgstr "Затвори" #: ../../printerdrake.pm_.c:1739 ../../printerdrake.pm_.c:1751 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "Штампам/Скенирам на \"%s\"" #: ../../printerdrake.pm_.c:1740 ../../printerdrake.pm_.c:1752 #, c-format msgid "Printing on the printer \"%s\"" msgstr "Штампам на штампачу \"%s\"" #: ../../printerdrake.pm_.c:1742 msgid "Print option list" msgstr "Листа са опцијама за штампач" #: ../../printerdrake.pm_.c:1764 #, c-format msgid "" "Your HP multi-function device was configured automatically to be able to " "scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify " "the scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line " "to get more information.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" "Ваш HP мулти-функционални уређај је аутоматски подешен да би могао да " "скенира. Сада можете да скенирате са \"scanimage\" (\"scanimage -d hp:%s\" " "да би одредили скенер кода имате више од једног) из командне линије или са " "графичким интерфејсима \"xscanimage\" или \"xsane\". Уколико користите the " "GIMP, можете такође скенирати бирањем одговарајуће ставке у \"Фајлe\"/" "\"Acquire\" менију. Погледајте и \"man scanimage\" и \"man sane-hp\" у " "командној линији за више информација.\n" "\n" "Не користи \"scannerdrake\" за овај уређај!" #: ../../printerdrake.pm_.c:1771 #, c-format msgid "" "Your HP multi-function device was configured automatically to be able to " "scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". " "Scanning via a graphical interface or from the GIMP is not supported yet for " "your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/" "ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or " "1200 you can only scan when you have the scanner option installed.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" "Ваш HP мулти-функционални уређај је аутоматски подешен да би био у " "могућности да скенира. Сада можете да скенирате из командне линије са " "\"ptal-hp %s scan ...\". Скенирање из графичког интерфејса или из GIMP-а " "није подржано још увек за ваш уређај. Више информација можете пронаћи у \"/" "usr/share/doc/hpoj-0.8/ptal-hp-scan.html\" фајлу на вашем систему. Уколико " "имате HP LaserJet 1100 или 1200 можете скенирати само ако имате инсталирану " "скенер опцију.\n" "\n" "Не користи \"scannerdrake\" за овај уређај!" #: ../../printerdrake.pm_.c:1793 ../../printerdrake.pm_.c:2220 #: ../../printerdrake.pm_.c:2484 msgid "Reading printer data..." msgstr "Учитавам податке за штампач ..." #: ../../printerdrake.pm_.c:1813 ../../printerdrake.pm_.c:1841 #: ../../printerdrake.pm_.c:1876 msgid "Transfer printer configuration" msgstr "Конфигурација за трансфер штампача" #: ../../printerdrake.pm_.c:1814 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" "Можете копирати конфигурацију штампача коју сте завршили за spooler %s to %" "s, ваш тренутни spooler. Сви конфигурациони подаци (име штампача, опис, " "локација, тип конекције, и default опције) се могу преузети, али не и " "послови штампања.\n" "Ни сви queues не могу бити пребачени због следећих разлога:\n" #: ../../printerdrake.pm_.c:1817 msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" "CUPS не подржава штампаче на Novell серверима или штампачима који шаљу " "податке у слободно-формирану команду.\n" #: ../../printerdrake.pm_.c:1819 msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" "PDQ подржава само локалне штампаче, удаљене LPD штампаче, и Socket/TCP " "штампаче.\n" #: ../../printerdrake.pm_.c:1821 msgid "LPD and LPRng do not support IPP printers.\n" msgstr "LPD и LPRng не подржавају IPP штампаче.\n" #: ../../printerdrake.pm_.c:1823 msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" "Као додатак, queues који су креирани са овим програмом или \"foomatic-" "configure\" не могу бити пребачени." #: ../../printerdrake.pm_.c:1824 msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" "\n" "Такође, штампачи конфигурисани са PPD фајловима који потичу од произвођача " "или са основним CUPS драјверима не могу бити пребачени." #: ../../printerdrake.pm_.c:1825 msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" "\n" "Означите штампаче које желите да пребаците и кликните на \n" "\"Пребаци\"." #: ../../printerdrake.pm_.c:1828 msgid "Do not transfer printers" msgstr "Не пребацуј штампаче" #: ../../printerdrake.pm_.c:1829 ../../printerdrake.pm_.c:1846 msgid "Transfer" msgstr "Пребаци" #: ../../printerdrake.pm_.c:1842 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" "Штампач \"%s\" већ постоји под %s. \n" "Кликни на \"Пребаци\" да би прешли преко старог.\n" "Можете укуцати и ново име или прескочити овај штампач." #: ../../printerdrake.pm_.c:1850 msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "Име штампaча треба да садржи само словa, броjеве и underscore" #: ../../printerdrake.pm_.c:1855 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" "Штампач \"%s\" већ постоји,\n" "да ли стварно желите да поново упишете његове опције?" #: ../../printerdrake.pm_.c:1863 msgid "New printer name" msgstr "Ново име штампача" #: ../../printerdrake.pm_.c:1866 #, c-format msgid "Transferring %s..." msgstr "Трансферишем %s ..." #: ../../printerdrake.pm_.c:1877 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" "Пребацили сте свој бивши default штампач (\"%s\"), Да ли треба да буде " "поново default штампач под новим системом за штампање %s?" #: ../../printerdrake.pm_.c:1886 msgid "Refreshing printer data..." msgstr "Освежавам податаке о штампачу..." #: ../../printerdrake.pm_.c:1894 ../../printerdrake.pm_.c:1965 #: ../../printerdrake.pm_.c:1977 msgid "Configuration of a remote printer" msgstr "Подешавање удаљеног штампача" #: ../../printerdrake.pm_.c:1895 msgid "Starting network..." msgstr "Стартујем мрежу ..." #: ../../printerdrake.pm_.c:1929 ../../printerdrake.pm_.c:1933 #: ../../printerdrake.pm_.c:1935 msgid "Configure the network now" msgstr "Подеси мрежу сада" #: ../../printerdrake.pm_.c:1930 msgid "Network functionality not configured" msgstr "Мрежна функционалност није подешена" #: ../../printerdrake.pm_.c:1931 msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" "Треба да подесите удаљени штампач. За то вам је потребан мрежни приступ, али " "ваша мрежа није још подешена. Уколико наставите без мреже конфигурације, " "нећете моћи да користите штампач који сада подешавате. Како желите да " "наставите?" #: ../../printerdrake.pm_.c:1934 msgid "Go on without configuring the network" msgstr "Настави даље без подешавања мреже" #: ../../printerdrake.pm_.c:1967 msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network gets accessable after booting your " "system and correct the configuration using the Mandrake Control Center, " "section \"Network & Internet\"/\"Connection\", and afterwards set up the " "printer, also using the Mandrake Control Center, section \"Hardware\"/" "\"Printer\"" msgstr "" "Мрежна конфигурација која је креирана током инсталције не може сада да се " "покрене. Проверите да ли је мрежа доступна након рестарта система и " "исправите конфигурацију користећи Mandrake CКонтролни Центар, секција " "\"Мрежа & Интернет\"/\"Коненкција\", и након тога подесите штампач, такође " "кориштењем Mandrake Контролног Центра, секција \"Хардвер\"/\"Штампач\"" #: ../../printerdrake.pm_.c:1968 msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" "Мрежни приступ није покренут и не може да се стартује. Проверите вашу " "конфигурацију и ваше хардверске компоненте. Онда пробајте понова да подесите " "удаљени штампач." #: ../../printerdrake.pm_.c:1978 msgid "Restarting printing system..." msgstr "Рестартујем систем за штампaње ..." #: ../../printerdrake.pm_.c:2016 msgid "high" msgstr "велики" #: ../../printerdrake.pm_.c:2016 msgid "paranoid" msgstr "параноидни" #: ../../printerdrake.pm_.c:2017 #, c-format msgid "Installing a printing system in the %s security level" msgstr "Инсталирам систем за штампање у %s сигурносном нивоу" #: ../../printerdrake.pm_.c:2018 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessable by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" "Сада треба да инсталирате систем за штампање %s на систему који се налази у %" "s сигурносном нивоу.\n" "\n" "Овај систем за штампање покреће демон (позадински процес) који чека на " "послове штампања и управља њима. Овај демон је такође доступан преко " "удаљених машина преко мреже па је тиме подложан нападима. Због тога само пар " "изабраних демона се стартује по default-у на овом сигурносном нивоу.\n" "\n" "Да ли стварно желите да подесите штампање на овој машини?" #: ../../printerdrake.pm_.c:2050 msgid "Starting the printing system at boot time" msgstr "Покрени систем за штампање при старању система" #: ../../printerdrake.pm_.c:2051 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" "Систем за штампање (%s)неће бити аутоматски покренут при стартању машине.\n" "\n" "Могуће је аутоматско стартање искључено променом на вишљи ниво сигурности, " "због тога што је систем за штампање примамљив за нападе.\n" "\n" "Да ли поново желите да аутоматски стартујете систем за штампање ?" #: ../../printerdrake.pm_.c:2074 ../../printerdrake.pm_.c:2112 #: ../../printerdrake.pm_.c:2142 ../../printerdrake.pm_.c:2175 #: ../../printerdrake.pm_.c:2280 msgid "Checking installed software..." msgstr "Проверавам инсталирани софтвер..." #: ../../printerdrake.pm_.c:2116 msgid "Removing LPRng..." msgstr "Уклањам LPRng..." #: ../../printerdrake.pm_.c:2146 msgid "Removing LPD..." msgstr "Уклањам LPD..." #: ../../printerdrake.pm_.c:2204 msgid "Select Printer Spooler" msgstr "Изаберите Spooler за штампач" #: ../../printerdrake.pm_.c:2205 msgid "Which printing system (spooler) do you want to use?" msgstr "Који систем за штампaње (spooler) желите да користитe ?" #: ../../printerdrake.pm_.c:2238 #, fuzzy, c-format msgid "Configuring printer \"%s\"..." msgstr "Подешавам штампач \"%s\" ..." #: ../../printerdrake.pm_.c:2251 msgid "Installing Foomatic..." msgstr "Инсталирам Foomatic ..." #: ../../printerdrake.pm_.c:2308 ../../printerdrake.pm_.c:2347 #: ../../printerdrake.pm_.c:2732 ../../printerdrake.pm_.c:2802 msgid "Printer options" msgstr "Опције штампача" #: ../../printerdrake.pm_.c:2317 msgid "Preparing PrinterDrake..." msgstr "Припремам PrinterDrake ..." #: ../../printerdrake.pm_.c:2334 ../../printerdrake.pm_.c:2889 #, fuzzy msgid "Configuring applications..." msgstr "Подешавам штампач \"%s\" ..." #: ../../printerdrake.pm_.c:2354 msgid "Would you like to configure printing?" msgstr "Да ли бисте да подесите штампач?" #: ../../printerdrake.pm_.c:2366 msgid "Printing system: " msgstr "Систем за штампање: " #: ../../printerdrake.pm_.c:2414 msgid "Printerdrake" msgstr "Printerdrake" #: ../../printerdrake.pm_.c:2418 msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; to view information about it; " "or to make a printer on a remote CUPS server available for Star Office/" "OpenOffice.org." msgstr "" "Следећи штампачи су подешени. Двокликните на штампач да би променили његове " "поставке; да би га поставили за default штампач; да би видели информације о " "њему; или да би омогућили штампач на удаљеном CUPS серверу доступним за Star/" "Open Office." #: ../../printerdrake.pm_.c:2419 msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it." msgstr "" "Следећи штаThe following printers are configured. Double-click on a printer " "to change its settings; to make it the default printer; or to view " "information about it." #: ../../printerdrake.pm_.c:2445 msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" "Освежи листу штампача (да би приказао све доступне удаљене CUPS штампаче)" #: ../../printerdrake.pm_.c:2463 msgid "Change the printing system" msgstr "Промените систем за штампање" #: ../../printerdrake.pm_.c:2468 ../../standalone/draknet_.c:278 msgid "Normal Mode" msgstr "Нормални Мод" #: ../../printerdrake.pm_.c:2624 ../../printerdrake.pm_.c:2674 #: ../../printerdrake.pm_.c:2883 msgid "Do you want to configure another printer?" msgstr "Да ли хоћете да подесите још један штампач?" #: ../../printerdrake.pm_.c:2710 msgid "Modify printer configuration" msgstr "Измена конфигурације штампача" #: ../../printerdrake.pm_.c:2712 #, c-format msgid "" "Printer %s\n" "What do you want to modify on this printer?" msgstr "" "Штампач %s\n" "Да ли хоћете да измените опције за овај штампач?" #: ../../printerdrake.pm_.c:2716 msgid "Do it!" msgstr "Уради то!" #: ../../printerdrake.pm_.c:2721 ../../printerdrake.pm_.c:2776 msgid "Printer connection type" msgstr "Тип конекције штампача" #: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2780 msgid "Printer name, description, location" msgstr "Име, опис и локација штампача" #: ../../printerdrake.pm_.c:2724 ../../printerdrake.pm_.c:2795 msgid "Printer manufacturer, model, driver" msgstr "Произвођач, модел и драјвер штампача" #: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796 msgid "Printer manufacturer, model" msgstr "Произођач и модел штампача" #: ../../printerdrake.pm_.c:2734 ../../printerdrake.pm_.c:2806 msgid "Set this printer as the default" msgstr "Подеси овај штампач као default" #: ../../printerdrake.pm_.c:2736 ../../printerdrake.pm_.c:2811 msgid "Add this printer to Star Office/OpenOffice.org" msgstr "Додај овај штампач у Star Office/OpenOffice.org" #: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2820 msgid "Remove this printer from Star Office/OpenOffice.org" msgstr "Уклони овај штампач из Star Office/OpenOffice.org" #: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2829 msgid "Print test pages" msgstr "Иштампај тест странице" #: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2831 msgid "Know how to use this printer" msgstr "Да ли знате како да користите овај штампач" #: ../../printerdrake.pm_.c:2741 ../../printerdrake.pm_.c:2833 msgid "Remove printer" msgstr "Уклони штампaч" #: ../../printerdrake.pm_.c:2785 #, fuzzy, c-format msgid "Removing old printer \"%s\"..." msgstr "Уклањам стари штампач \"%s\" ..." #: ../../printerdrake.pm_.c:2809 msgid "Default printer" msgstr "Default штампач" #: ../../printerdrake.pm_.c:2810 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "Штампач \"%s\" је сада постављен као default штампач." #: ../../printerdrake.pm_.c:2814 ../../printerdrake.pm_.c:2817 msgid "Adding printer to Star Office/OpenOffice.org" msgstr "Додајем штампач у Star Office/OpenOffice.org" #: ../../printerdrake.pm_.c:2815 #, c-format msgid "" "The printer \"%s\" was successfully added to Star Office/OpenOffice.org." msgstr "Штампач \"%s\" је успешно додан у Star Office/OpenOffice.org" #: ../../printerdrake.pm_.c:2818 #, c-format msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org." msgstr "Неуспело додавање штампача \"%s\" у Star Office/OpenOffice.org" #: ../../printerdrake.pm_.c:2823 ../../printerdrake.pm_.c:2826 msgid "Removing printer from Star Office/OpenOffice.org" msgstr "Уклањање штампача из Star Office/OpenOffice.org" #: ../../printerdrake.pm_.c:2824 #, c-format msgid "" "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org." msgstr "Штампач \"%s\" је успешно уклоњен из Star Office/OpenOffice.org-а" #: ../../printerdrake.pm_.c:2827 #, c-format msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org." msgstr "" "Неоспео покушај уклањања штампача \"%s\" из Star Office/OpenOffice.org-а" #: ../../printerdrake.pm_.c:2835 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "Да ли хоћете да уклоните штампач \"%s\"?" #: ../../printerdrake.pm_.c:2837 #, fuzzy, c-format msgid "Removing printer \"%s\"..." msgstr "Уклањам штампач \"%s\" ..." #: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58 #: ../../proxy.pm_.c:78 msgid "Proxy configuration" msgstr "Подeшавaње проксиja" #: ../../proxy.pm_.c:30 msgid "" "Welcome to the proxy configuration utility.\n" "\n" "Here, you'll be able to set up your http and ftp proxies\n" "with or without login and password\n" msgstr "" "Добродошли у алат за конфигурацију proxy-ја.\n" "\n" "Овде можете да подесите ваше http и ftp проксије\n" "са или без корисничког имена и лозинке\n" #: ../../proxy.pm_.c:38 msgid "" "Please fill in the http proxy informations\n" "Leave it blank if you don't want an http proxy" msgstr "" "Молим Вас да унесете http proxy информације\n" "Оставите поља празнима уколико не желите да користетите прокси" #: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60 msgid "URL" msgstr "URL" #: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61 msgid "port" msgstr "Порт" #: ../../proxy.pm_.c:44 msgid "Url should begin with 'http:'" msgstr "Url треба да почиње са http://..." #: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69 msgid "The port part should be numeric" msgstr "Броj порта би требао да буде нумеричка ознака (број)" #: ../../proxy.pm_.c:59 msgid "" "Please fill in the ftp proxy informations\n" "Leave it blank if you don't want an ftp proxy" msgstr "" "Молим Вас да унесете информације о ftp proxy-ју\n" "Поља оставите празнима уколико не желите да користите ftp прокси" #: ../../proxy.pm_.c:65 msgid "Url should begin with 'ftp:'" msgstr "Url треба да почиње са 'ftp:'" #: ../../proxy.pm_.c:79 msgid "" "Please enter proxy login and password, if any.\n" "Leave it blank if you don't want login/passwd" msgstr "" "Унесите proxy корисничко име и лозинку, уколико постоје.\n" "Поља оставите пазнима уколико не желите да користите корисничко име/лозинку" #: ../../proxy.pm_.c:80 msgid "login" msgstr "логовaњe" #: ../../proxy.pm_.c:82 msgid "password" msgstr "лозинка" #: ../../proxy.pm_.c:84 msgid "re-type password" msgstr "помово унесите лозинке" #: ../../proxy.pm_.c:88 msgid "The passwords don't match. Try again!" msgstr "Неподударност лозинки. Пробајте поново!" #: ../../raid.pm_.c:35 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "Није могуће додати партицију на _форматиран_ RAID md%d" #: ../../raid.pm_.c:108 #, c-format msgid "Can't write file %s" msgstr "Није могућ унос у фајл %s" #: ../../raid.pm_.c:137 msgid "mkraid failed" msgstr "mkraid неуспело" #: ../../raid.pm_.c:137 msgid "mkraid failed (maybe raidtools are missing?)" msgstr "mkraid неуспело (можда недостаjе raidtools ?)" #: ../../raid.pm_.c:153 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "Нема довољно партиција за RAID ниво %d\n" #: ../../services.pm_.c:14 msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "Стартам ALSA (Advanced Linux Sound Architecture) систем за звук" #: ../../services.pm_.c:15 msgid "Anacron a periodic command scheduler." msgstr "Anacron - подесите период.командe" #: ../../services.pm_.c:16 msgid "" "apmd is used for monitoring batery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "apmd се користи за прaћeње статуса батериje и логовaње преко syslog.\n" "Користи се и за гaшeње мaшине (ради и на десктоп мaшинамa) када je батериjа " "слаба" #: ../../services.pm_.c:18 msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "Покрeће команде заказане at командом,као и batch команде као jе " "оптерeћеност\n" "система малa." #: ../../services.pm_.c:20 msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "cron jе стандардни UNIX програм коjи покрeће корисничке програме\n" "прериодично у заказано време. vixie cron додаjе опциjе простом UNIX cron," "укључуjући бољу сигурност и бољу подесивост." #: ../../services.pm_.c:23 msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM даjе подршку за миша за тексулано-базиране апликациjе као што jе\n" "Midnight Commander.Исто тако даjе подршку за pop-up мениje на конзоли." #: ../../services.pm_.c:26 msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" "HardDrake старта испитивање харедвера, и по потреби ђе подесити \n" "нови/измењени хардвер." #: ../../services.pm_.c:28 ../../standalone/logdrake_.c:414 msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" "Apache jе WWW сервер. Он се користи да опслужуjе HTML фаjлове\n" "и CGI." #: ../../services.pm_.c:29 msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "Интерент супер сервер демон (знан као netd) старта \n" "разне интернет сервисе.Он jе одговоран за покретaње многиx сервиса као нпр. " "elnet, ftp, rsh, и rlogin.Искључуjући њега, искључуjете и сервисе \n" "за коjе jе он одговоран." #: ../../services.pm_.c:33 msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" "Покрените филтрирање пакета за Linux кернел серије 2.2, да би подесили\n" "firewall ради заштите ваше машине од мрежних напада." #: ../../services.pm_.c:35 msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "Оваj пакет активира одабрану мапу тастатуре како jе подeшено \n" "у /etc/sysconfig/keyboard.Ово се подeшава користeћи kbdconfig алатку.\n" "Треба да буде укључен на вeћину мaшинa." #: ../../services.pm_.c:38 msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" "Аутоматска регенерација кернеловог заглавља у /boot заr\n" "/usr/include/linux/{autoconf,version}.h" #: ../../services.pm_.c:40 msgid "Automatic detection and configuration of hardware at boot." msgstr "Аутоматска детекција и конфигурација хардвера при стартању система." #: ../../services.pm_.c:41 msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" "Linuxconf ђе понекад изводити разне задатке током\n" "стартања система ради одржавања и подешавања система." #: ../../services.pm_.c:43 msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd jе print демон потребан да би lpr радио добро.То jе \n" "у основи сервер коjи арбитрира print послове штампачу(има)." #: ../../services.pm_.c:45 msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" "Linux-ов Виртуелни Сервер, користи се за изградњу брзог и доступног\n" "сервера." #: ../../services.pm_.c:47 ../../standalone/logdrake_.c:415 msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "Назван као (BIND) jе Domain Name Server (DNS) коjи се користи за даje host " "име IP адреси." #: ../../services.pm_.c:48 msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "Монтирaње и демонтирaње свих Мрeжних фаjл системa(NFS), SMB (Lan\n" "Manager/Windows), и NCP (NetWare) тaчака монтирaњa. " #: ../../services.pm_.c:50 msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "Активирaње и деактивирaње свих мрeжних интерфеjса конфигурисаних за старт \n" "при подизaњу система." #: ../../services.pm_.c:52 msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS jе популарни протокол за размену фаjловa преко TCP/IP мрeжа.\n" "Оваj сервис омогућава функционалност NFS сервера,коjи се конфигурише преко \n" "/etc/exports датотекe." #: ../../services.pm_.c:55 msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS jе популарни протокол за размену фаjловa преко TCP/IP мрeжа.\n" "Оваj сервис омогућава функционалност NFS file locking функциjе" #: ../../services.pm_.c:57 msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" "Аутоматски укључује numlock тастер под конзолом\n" "и у XFree при стартању." #: ../../services.pm_.c:59 msgid "Support the OKI 4w and compatible winprinters." msgstr "Подршка за OKI 4w и компатибилне му win штампаче." #: ../../services.pm_.c:60 msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" "PCMCIA подршка се обично користи за етернет и модеме у лаптоповима.\n" "Неће се покренути уколико ниjе конфигурисан тако даjе безбедно инсталиран \n" "на систему ком ниjе потребан." #: ../../services.pm_.c:63 msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "Портмапер уравља RPC конекциjамa,коjе користе\n" "протоколи као NFS и NIS.Портмап сервер мора бити покренут на мaшинамa\n" "коjе раде као сервери за протоколе коjи користе RPC механизам." #: ../../services.pm_.c:66 ../../standalone/logdrake_.c:417 msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" "Postfix jе Mail Transport Agent,коjи у стварипремeшта пошту са jедне мaшине " "на другу." #: ../../services.pm_.c:67 msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "чува и обнавља системски entropy pool за већи квалитет генерисaњe\n" "случаjних броjевa." #: ../../services.pm_.c:69 msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle" msgstr "" "Додељује raw урећаје за блок урећаје (као што су хард диск\n" "партиције), што мође бити корисно за апликације као што је Oracle" #: ../../services.pm_.c:71 msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "Routed демон дозвољава аутоматско IP рутeр update-овaње преко\n" "RIP протокола.Док сe RIP доста корисити на малим мрeжама,комплексниjи \n" " routing протоколи су потребни за комплексне мрeже." #: ../../services.pm_.c:74 msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "rstat протокол дозвољава корисницима на мрeжи да омогућe\n" "мeрeње перформанси за било коjу мaшину на тоj мрeжи." #: ../../services.pm_.c:76 msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "rusers протокол омогућава корисницима на мрeжи да откриjу ко je\n" "улогован на другим мaшинама." #: ../../services.pm_.c:78 msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" "rwho протокол дозвољава удaљеним корисницима да добиjу листу свих\n" "корисника улогованих на систем са покренутим rwho демоном (слично finger-у)." #: ../../services.pm_.c:80 msgid "Launch the sound system on your machine" msgstr "Покреће систем за звук на вашој машини" #: ../../services.pm_.c:81 msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "Syslog jе обjекат помоћу ког многи демони користе за логовaње порукa\n" "у разним системским лог фаjловимa. Добра je идеја имaти увек покренут syslog." #: ../../services.pm_.c:83 msgid "Load the drivers for your usb devices." msgstr "Подиже драјвере за ваше usb уређаје." #: ../../services.pm_.c:84 msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "Покрeће X Фонт сервер (потребно за покретање XFree)." #: ../../services.pm_.c:110 ../../services.pm_.c:152 msgid "Choose which services should be automatically started at boot time" msgstr "Изаберите које сервиси треба аутоматски да се покрену при стартању" #: ../../services.pm_.c:122 msgid "Printing" msgstr "Штампање" #: ../../services.pm_.c:123 msgid "Internet" msgstr "Интернет" #: ../../services.pm_.c:126 msgid "File sharing" msgstr "Заједничко дељење фајлова" #: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:923 msgid "System" msgstr "Систем" #: ../../services.pm_.c:133 msgid "Remote Administration" msgstr "Удаљена администрација" #: ../../services.pm_.c:141 msgid "Database Server" msgstr "Сервер Базе податакa" #: ../../services.pm_.c:170 #, c-format msgid "Services: %d activated for %d registered" msgstr "Сервиси: %d активираних за %d регистрованих" #: ../../services.pm_.c:186 msgid "Services" msgstr "Сервиси" #: ../../services.pm_.c:198 msgid "running" msgstr "покренуто" #: ../../services.pm_.c:198 msgid "stopped" msgstr "заустављено" #: ../../services.pm_.c:212 msgid "Services and deamons" msgstr "Сервиси и демони" #: ../../services.pm_.c:217 msgid "" "No additional information\n" "about this service, sorry." msgstr "" "жалим али немa додатних информациja\n" "о овом сервису." #: ../../services.pm_.c:224 msgid "On boot" msgstr "При стартaњу" #: ../../services.pm_.c:236 msgid "Start" msgstr "Старт" #: ../../services.pm_.c:236 msgid "Stop" msgstr "Стоп" #: ../../share/advertising/00-thanks.pl_.c:9 msgid "Thank you for choosing Mandrake Linux 8.2" msgstr "" #: ../../share/advertising/00-thanks.pl_.c:10 msgid "Welcome to the Open Source world" msgstr "" #: ../../share/advertising/00-thanks.pl_.c:11 msgid "" "The success of MandrakeSoft is based upon the principle of Free Software. " "Your new operating system is the result of collaborative work on the part of " "the worldwide Linux Community" msgstr "" #: ../../share/advertising/01-gnu.pl_.c:9 #, fuzzy msgid "Join the Free Software world" msgstr "Протокол за статак светa" #: ../../share/advertising/01-gnu.pl_.c:10 msgid "" "Get to know the Open Source community and become a member. Learn, teach, and " "help others by joining the many discussion forums that you will find in our " "\"Community\" webpages" msgstr "" #: ../../share/advertising/02-internet.pl_.c:9 #, fuzzy msgid "Internet and Messaging" msgstr "Интернет приступ" #: ../../share/advertising/02-internet.pl_.c:10 msgid "" "Mandrake Linux 8.2 provides the best software to access everything the " "Internet has to offer: Surf the web & view animations with Mozilla and " "Konqueror, exchange email & organize your personal information with " "Evolution and Kmail, and much more" msgstr "" #: ../../share/advertising/03-graphic.pl_.c:9 #, fuzzy msgid "Multimedia and Graphics" msgstr "Мултимедиja - Графикa" #: ../../share/advertising/03-graphic.pl_.c:10 msgid "" "Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use " "the latest software to play music and audio files, edit and organize your " "images and photos, watch TV and videos, and much more" msgstr "" #: ../../share/advertising/04-develop.pl_.c:9 msgid "Development" msgstr "Развојна" #: ../../share/advertising/04-develop.pl_.c:10 msgid "" "Mandrake Linux 8.2 is the ultimate development platform. Discover the power " "of the GNU gcc compiler as well as the best Open Source development " "environments" msgstr "" #: ../../share/advertising/05-contcenter.pl_.c:9 #: ../../standalone/drakbug_.c:50 #, fuzzy msgid "Mandrake Control Center" msgstr "Контролни Центар" #: ../../share/advertising/05-contcenter.pl_.c:10 msgid "" "The Mandrake Linux 8.2 Control Center is a one-stop location for fully " "customizing and configuring your Mandrake system" msgstr "" #: ../../share/advertising/06-user.pl_.c:9 #, fuzzy msgid "User interfaces" msgstr "Мрeжни интерфejс" #: ../../share/advertising/06-user.pl_.c:10 msgid "" "Mandrake Linux 8.2 provides 11 different graphical desktop environments and " "window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker " "0.8, and the rest" msgstr "" #: ../../share/advertising/07-server.pl_.c:9 #, fuzzy msgid "Server Software" msgstr "SMB сервер host:" #: ../../share/advertising/07-server.pl_.c:10 msgid "" "Transform your machine into a powerful server with just a few clicks of the " "mouse: Web server, email, firewall, router, file and print server, ..." msgstr "" #: ../../share/advertising/08-games.pl_.c:9 msgid "Games" msgstr "Игрe" #: ../../share/advertising/08-games.pl_.c:10 msgid "" "Mandrake Linux 8.2 provides the best Open Source games - arcade, action, " "cards, sports, strategy, ..." msgstr "" #: ../../share/advertising/09-MDKcampus.pl_.c:9 msgid "MandrakeCampus" msgstr "" #: ../../share/advertising/09-MDKcampus.pl_.c:10 msgid "" "Would you like to learn Linux simply, quickly, and for free? MandrakeSoft " "provides free Linux training, as well as a way to test your progress, at " "MandrakeCampus -- our online training center" msgstr "" #: ../../share/advertising/10-MDKexpert.pl_.c:9 #, fuzzy msgid "MandrakeExpert" msgstr "Експерт" #: ../../share/advertising/10-MDKexpert.pl_.c:10 msgid "" "Quality support from the Linux Community, and from MandrakeSoft, is just " "around the corner. And if you're already a Linux veteran, become an \"Expert" "\" and share your knowledge at our support website" msgstr "" #: ../../share/advertising/11-consul.pl_.c:9 #, fuzzy msgid "MandrakeConsulting" msgstr "Mandrake Алати за објашњења" #: ../../share/advertising/11-consul.pl_.c:10 msgid "" "For all of your IT projects, our consultants are ready to analyze your " "requirements and offer a customized solution. Benefit from MandrakeSoft's " "vast experience as a Linux producer to provide a true IT alternative for " "your business organization" msgstr "" #: ../../share/advertising/12-MDKstore.pl_.c:9 msgid "MandrakeStore" msgstr "" #: ../../share/advertising/12-MDKstore.pl_.c:10 msgid "" "A full range of Linux solutions, as well as special offers on products and " "'goodies', are available online at our e-store" msgstr "" #: ../../share/advertising/13-Nvert.pl_.c:9 msgid "" "For more information on MandrakeSoft's Professional Services and commercial " "offerings, please see the following web page:" msgstr "" #: ../../share/advertising/13-Nvert.pl_.c:11 msgid "http://www.mandrakesoft.com/sales/contact" msgstr "" #: ../../standalone.pm_.c:25 msgid "Installing packages..." msgstr "Инсталирам пакете..." #: ../../standalone/diskdrake_.c:85 msgid "" "I can't read your partition table, it's too corrupted for me :(\n" "I'll try to go on blanking bad partitions" msgstr "" "Не могу прочитати табелу партиција, много је искварена за мене :(\n" "Покушаћу даље заобилазећи лоше партиције" #: ../../standalone/drakTermServ_.c:175 #, fuzzy msgid "Mandrake Terminal Server Configuration" msgstr "Конфигурација за трансфер штампача" #: ../../standalone/drakTermServ_.c:190 #, fuzzy msgid "Enable Server" msgstr "Сервер Базе податакa" #: ../../standalone/drakTermServ_.c:197 #, fuzzy msgid "Disable Server" msgstr "Сервер Базе податакa" #: ../../standalone/drakTermServ_.c:205 #, fuzzy msgid "Start Server" msgstr "NIS Сервер" #: ../../standalone/drakTermServ_.c:212 #, fuzzy msgid "Stop Server" msgstr "NIS Сервер" #: ../../standalone/drakTermServ_.c:220 msgid "Etherboot Floppy/ISO" msgstr "" #: ../../standalone/drakTermServ_.c:222 msgid "Net Boot Images" msgstr "" #: ../../standalone/drakTermServ_.c:226 #, fuzzy msgid "Add/Del Users" msgstr "Додај корисника" #: ../../standalone/drakTermServ_.c:228 #, fuzzy msgid "Add/Del Clients" msgstr "DHCP клиjент" #: ../../standalone/drakTermServ_.c:233 ../../standalone/drakbackup_.c:2256 #: ../../standalone/drakbackup_.c:2281 ../../standalone/drakbackup_.c:2302 #: ../../standalone/drakbackup_.c:2323 ../../standalone/drakbackup_.c:2341 #: ../../standalone/drakbackup_.c:2373 ../../standalone/drakbackup_.c:2389 #: ../../standalone/drakbackup_.c:2409 ../../standalone/drakbackup_.c:2428 #: ../../standalone/drakbackup_.c:2450 ../../standalone/drakfont_.c:578 msgid "Help" msgstr "Помоћ" #: ../../standalone/drakTermServ_.c:420 msgid "Boot Floppy" msgstr "" #: ../../standalone/drakTermServ_.c:422 msgid "Boot ISO" msgstr "" #: ../../standalone/drakTermServ_.c:491 msgid "Build Whole Kernel -->" msgstr "" #: ../../standalone/drakTermServ_.c:493 ../../standalone/drakTermServ_.c:523 msgid "This will take a few minutes." msgstr "" #: ../../standalone/drakTermServ_.c:505 msgid "No kernel selected!" msgstr "" #: ../../standalone/drakTermServ_.c:508 msgid "Build Single NIC -->" msgstr "" #: ../../standalone/drakTermServ_.c:519 #, fuzzy msgid "No nic selected!" msgstr "Ниjе конектован" #: ../../standalone/drakTermServ_.c:522 msgid "Build All Kernels -->" msgstr "" #: ../../standalone/drakTermServ_.c:536 #, fuzzy msgid "<-- Delete" msgstr "Обриши" #: ../../standalone/drakTermServ_.c:543 #, fuzzy msgid "Delete All NBIs" msgstr "Селектуј Све" #: ../../standalone/drakTermServ_.c:605 #, fuzzy msgid "Add User -->" msgstr "Додај корисника" #: ../../standalone/drakTermServ_.c:613 msgid "<-- Del User" msgstr "" #: ../../standalone/drakTermServ_.c:687 msgid "Add Client -->" msgstr "" #: ../../standalone/drakTermServ_.c:719 #, fuzzy msgid "<-- Del Client" msgstr "DHCP клиjент" #: ../../standalone/drakTermServ_.c:725 #, fuzzy msgid "dhcpd Config..." msgstr "Kонфигурациjа у току..." #: ../../standalone/drakTermServ_.c:872 #, fuzzy msgid "Write Config" msgstr "поново подеси" #: ../../standalone/drakTermServ_.c:930 #, fuzzy msgid "Please insert floppy disk:" msgstr "Убаците Boot дискету у уређај %s" #: ../../standalone/drakTermServ_.c:934 msgid "Couldn't access the floppy!" msgstr "" #: ../../standalone/drakTermServ_.c:936 msgid "Floppy can be removed now" msgstr "" #: ../../standalone/drakTermServ_.c:939 #, fuzzy msgid "No floppy drive available!" msgstr "Неприступачан дискетни уређај" #: ../../standalone/drakTermServ_.c:948 msgid "Etherboot ISO image is /tmp/$nic.iso" msgstr "" #: ../../standalone/drakTermServ_.c:950 msgid "Something went wrong!" msgstr "" #: ../../standalone/drakTermServ_.c:969 msgid "Need to create /etc/dhcpd.conf first!" msgstr "" #: ../../standalone/drakautoinst_.c:45 msgid "Error!" msgstr "Грешка!" #: ../../standalone/drakautoinst_.c:46 #, c-format msgid "I can't find needed image file `%s'." msgstr "Не могу да пронађем потребни image фајл `%s'." #: ../../standalone/drakautoinst_.c:48 msgid "Auto Install Configurator" msgstr "Аутоинсталациони конфигуратор" #: ../../standalone/drakautoinst_.c:49 msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Do you want to continue?" msgstr "" "Сада треба да подесите Аутоинсталациону Дискету. Ова опције је донекле " "иопасна и мора се пажљиво користити.\n" "\n" "Са овом опцијом, моћи ћете да поновите инсталацију коју стеизвели на овом " "рачунару, са повременим упитима у циљу измене одређених вредности " "параметра.\n" "\n" "РАди максималне сигурности, партиционирање и форматирање никада неће бити " "извођено аутоматскиy, без обзира шта изабрали током инсталације на овом " "рачунару.\n" "\n" "Да ли желите да наставите?" #: ../../standalone/drakautoinst_.c:71 msgid "Automatic Steps Configuration" msgstr "Подешавање аутоматизованих корака" #: ../../standalone/drakautoinst_.c:72 msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" "изаберите за сваки корак да ли ће бити истоветан и аутоматизован илиће бити " "ручно подешаван" #: ../../standalone/drakautoinst_.c:83 #, fuzzy msgid "Creating auto install floppy" msgstr "Креирам ауто инсталациони флопи" #: ../../standalone/drakautoinst_.c:145 msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" "\n" "Добородошли.\n" "\n" "Параметри за аутоинсталацију су доступни у делу који се налази лево" #: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:548 #: ../../standalone/scannerdrake_.c:106 msgid "Congratulations!" msgstr "Честитамо !" #: ../../standalone/drakautoinst_.c:244 msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" "Дискета је успешно креирана.\n" "Сада можете поновити вашу инсталацију." #: ../../standalone/drakautoinst_.c:282 msgid "Auto Install" msgstr "Аутоинсталација" #: ../../standalone/drakautoinst_.c:352 msgid "Add an item" msgstr "Додај вредност" #: ../../standalone/drakautoinst_.c:359 msgid "Remove the last item" msgstr "Уклони задњу вредност" #: ../../standalone/drakbackup_.c:438 msgid "" "\n" " DrakBackup Report \n" "\n" msgstr "" "\n" " DrakBackup Извештај \n" "\n" #: ../../standalone/drakbackup_.c:439 msgid "" "\n" " DrakBackup Daemon Report\n" "\n" "\n" msgstr "" "\n" " DrakBackup Daemon Извештај\n" "\n" "\n" #: ../../standalone/drakbackup_.c:443 msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" "\n" " DrakBackup Детаљи Извештаја\n" "\n" "\n" #: ../../standalone/drakbackup_.c:465 msgid "total progess" msgstr "укупан напредак" #: ../../standalone/drakbackup_.c:544 ../../standalone/drakbackup_.c:591 msgid "Backup system files..." msgstr "Backup системских фајлова..." #: ../../standalone/drakbackup_.c:592 ../../standalone/drakbackup_.c:656 msgid "Hard Disk Backup files..." msgstr "backup-овање фајлова са хард диска..." #: ../../standalone/drakbackup_.c:604 msgid "Backup User files..." msgstr "backup-овање корсиникових фајлова" #: ../../standalone/drakbackup_.c:605 msgid "Hard Disk Backup Progress..." msgstr "Напредак Backup-овања хард диска..." #: ../../standalone/drakbackup_.c:655 msgid "Backup Other files..." msgstr "backup-овање осталих фајлова..." #: ../../standalone/drakbackup_.c:663 #, c-format msgid "" "file list send by FTP : %s\n" " " msgstr "" "листа фајлова послана преко FTP-а : %s\n" " " #: ../../standalone/drakbackup_.c:666 #, fuzzy msgid "" "\n" " FTP connexion problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" "\n" "(!) Проблеми са FTP конекцијом: Није могуће послати ваше backup фајлове " "преко FTP.\n" #: ../../standalone/drakbackup_.c:676 #, fuzzy msgid " Error during mail sending. \n" msgstr "(!) Грешка током слања mail-а. \n" #: ../../standalone/drakbackup_.c:717 ../../standalone/drakbackup_.c:728 #: ../../standalone/drakbackup_.c:739 ../../standalone/drakfont_.c:788 msgid "File Selection" msgstr "Одабир фајлова" #: ../../standalone/drakbackup_.c:744 msgid "Select the files or directories and click on 'Add'" msgstr "Одаберите фајлове или директоријуме и клините на 'Додај'" #: ../../standalone/drakbackup_.c:779 msgid "" "\n" "Please check all options that you need.\n" msgstr "" "\n" "Проверите све опције које вам требају.\n" #: ../../standalone/drakbackup_.c:780 msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" "Ове опције могу сачувати и касније обновити све фајлове у вашем /etc " "директоријуму.\n" #: ../../standalone/drakbackup_.c:781 msgid "Backup your System files. ( /etc directory )" msgstr "Сачувајте своје Системске фајлове ( /etc директоријум )" #: ../../standalone/drakbackup_.c:782 #, fuzzy msgid "Use incremental backup (do not replace old backups)" msgstr "" "Користи Инкрементални Backup-ове (не замењуј их са старим backup-овима)" #: ../../standalone/drakbackup_.c:783 msgid "Do not include critical files (passwd, group, fstab)" msgstr "Не укључуј критичне фајлове (passwd, group, fstab)" #: ../../standalone/drakbackup_.c:784 msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" "Са овом опцијом моћи ћете да обновите било коју верзију\n" " вашег /etc директоријума." #: ../../standalone/drakbackup_.c:801 msgid "Please check all users that you want to include in your backup." msgstr "Селектујте све кориснике које желите да укључите у backup." #: ../../standalone/drakbackup_.c:828 msgid "Do not include the browser cache" msgstr "Не укључуј кеш претраживача" #: ../../standalone/drakbackup_.c:829 ../../standalone/drakbackup_.c:853 msgid "Use Incremental Backups (do not replace old backups)" msgstr "" "Користи Инкрементални Backup-ове (не замењуј их са старим backup-овима)" #: ../../standalone/drakbackup_.c:851 ../../standalone/drakfont_.c:828 msgid "Remove Selected" msgstr "Уклони Селектовано" #: ../../standalone/drakbackup_.c:889 msgid "Windows (FAT32)" msgstr "Windows(FAT32)" #: ../../standalone/drakbackup_.c:928 msgid "Users" msgstr "Корисници" #: ../../standalone/drakbackup_.c:954 msgid "Use FTP connection to backup" msgstr "Корисити Use FTP connection to backup" #: ../../standalone/drakbackup_.c:957 msgid "Please enter the host name or IP." msgstr "Молим Вас унесете име хоста или IP." #: ../../standalone/drakbackup_.c:962 msgid "" "Please enter the directory to\n" " put the backup on this host." msgstr "" "Унесите директоријум да би\n" " ставили backup на овај хост." #: ../../standalone/drakbackup_.c:967 msgid "Please enter your login" msgstr "Унесите ваше корисничко име" #: ../../standalone/drakbackup_.c:972 msgid "Please enter your password" msgstr "Унесите вашу лозинку" #: ../../standalone/drakbackup_.c:978 msgid "Remember this password" msgstr "Запамти ову лозинку" #: ../../standalone/drakbackup_.c:1042 ../../standalone/drakbackup_.c:2038 msgid "FTP Connection" msgstr "FTP конекциja" #: ../../standalone/drakbackup_.c:1049 ../../standalone/drakbackup_.c:2046 msgid "Secure Connection" msgstr "Сигурносна Конекција" #: ../../standalone/drakbackup_.c:1075 ../../standalone/drakbackup_.c:2879 msgid "Use CD/DVDROM to backup" msgstr "Користи CD/DVDROM за backup" #: ../../standalone/drakbackup_.c:1078 ../../standalone/drakbackup_.c:2883 msgid "Please choose your CD space" msgstr "Изаберите ваш CD простор" #: ../../standalone/drakbackup_.c:1084 ../../standalone/drakbackup_.c:2895 msgid "Please check if you are using CDRW media" msgstr "Проверите да ли користите CDRW медиј" #: ../../standalone/drakbackup_.c:1090 ../../standalone/drakbackup_.c:2901 msgid "Please check if you want to erase your CDRW before" msgstr "Проверите да ли желите избришете ваш CDRW пре" #: ../../standalone/drakbackup_.c:1096 msgid "" "Please check if you want to include\n" " install boot on your CD." msgstr "" "Проверите да ли желите да укључите\n" " install boot на ваш CD." #: ../../standalone/drakbackup_.c:1102 msgid "" "Please enter your CD Writer device name\n" " ex: 0,1,0" msgstr "" "Унесите име вашег CD Writer уређаја\n" " ex: 0,1,0" #: ../../standalone/drakbackup_.c:1143 msgid "Use tape to backup" msgstr "Користи траку за backup" #: ../../standalone/drakbackup_.c:1146 msgid "Please enter the device name to use for backup" msgstr "Унесите име уређаја који користите за backup" #: ../../standalone/drakbackup_.c:1152 ../../standalone/drakbackup_.c:1193 #: ../../standalone/drakbackup_.c:2003 msgid "" "Please enter the maximum size\n" " allowed for Drakbackup" msgstr "" "Унесите максималну величину\n" " дозвољену за Drakbackup" #: ../../standalone/drakbackup_.c:1185 ../../standalone/drakbackup_.c:1995 msgid "Please enter the directory to save:" msgstr "Унесите директоријум да би сачували:" #: ../../standalone/drakbackup_.c:1199 ../../standalone/drakbackup_.c:2009 msgid "Use quota for backup files." msgstr "Користи quota заr backup фајлове" #: ../../standalone/drakbackup_.c:1257 msgid "Network" msgstr "Мрежа" #: ../../standalone/drakbackup_.c:1267 msgid "HardDrive / NFS" msgstr "HardDrive / NFS" #: ../../standalone/drakbackup_.c:1287 ../../standalone/drakbackup_.c:1291 #: ../../standalone/drakbackup_.c:1295 msgid "hourly" msgstr "на сат" #: ../../standalone/drakbackup_.c:1288 ../../standalone/drakbackup_.c:1292 #: ../../standalone/drakbackup_.c:1295 msgid "daily" msgstr "дневно" #: ../../standalone/drakbackup_.c:1289 ../../standalone/drakbackup_.c:1293 #: ../../standalone/drakbackup_.c:1295 msgid "weekly" msgstr "недељно" #: ../../standalone/drakbackup_.c:1290 ../../standalone/drakbackup_.c:1294 #: ../../standalone/drakbackup_.c:1295 msgid "monthly" msgstr "месечно" #: ../../standalone/drakbackup_.c:1302 msgid "Use daemon" msgstr "Користи демон" #: ../../standalone/drakbackup_.c:1307 msgid "" "Please choose the time \n" "interval between each backup" msgstr "" "Изаберите временски интервал \n" "између сваког backup-а" #: ../../standalone/drakbackup_.c:1313 msgid "" "Please choose the\n" "media for backup." msgstr "" "Изаберите\n" "медиј за backup." #: ../../standalone/drakbackup_.c:1317 msgid "Use Hard Drive with daemon" msgstr "Користи хард диск са демоном" #: ../../standalone/drakbackup_.c:1319 msgid "Use FTP with daemon" msgstr "Користи FTP са демоном" #: ../../standalone/drakbackup_.c:1323 msgid "Please be sure that the cron daemon is included in your services." msgstr "Проверите да ли је cron демон укључен у ваше сервисе." #: ../../standalone/drakbackup_.c:1359 msgid "Send mail report after each backup to :" msgstr "Пошаљи mail извештај након сваког backup/а на :" #: ../../standalone/drakbackup_.c:1401 msgid "What" msgstr "Шта" #: ../../standalone/drakbackup_.c:1406 msgid "Where" msgstr "Где" #: ../../standalone/drakbackup_.c:1411 msgid "When" msgstr "Када" #: ../../standalone/drakbackup_.c:1416 msgid "More Options" msgstr "Више Опција" #: ../../standalone/drakbackup_.c:1435 ../../standalone/drakbackup_.c:2791 msgid "Drakbackup Configuration" msgstr "Drakbackup Конфигурација" #: ../../standalone/drakbackup_.c:1453 #, fuzzy msgid "Please choose where you want to backup" msgstr "Изаберите шта желите да backup-ујете" #: ../../standalone/drakbackup_.c:1455 msgid "on Hard Drive" msgstr "на Хард Диск" #: ../../standalone/drakbackup_.c:1466 msgid "across Network" msgstr "преко Мреже" #: ../../standalone/drakbackup_.c:1530 msgid "Please choose what you want to backup" msgstr "Изаберите шта желите да backup-ујете" #: ../../standalone/drakbackup_.c:1531 msgid "Backup system" msgstr "Backup-уј систем" #: ../../standalone/drakbackup_.c:1532 msgid "Backup Users" msgstr "Backup-уј Кориснике" #: ../../standalone/drakbackup_.c:1535 msgid "Select user manually" msgstr "Изаберите кориснике ручно" #: ../../standalone/drakbackup_.c:1617 msgid "" "\n" "Backup Sources: \n" msgstr "" "\n" "Backup Извори: \n" #: ../../standalone/drakbackup_.c:1618 msgid "" "\n" "- System Files:\n" msgstr "" "\n" "- Системски фајлови:\n" #: ../../standalone/drakbackup_.c:1620 msgid "" "\n" "- User Files:\n" msgstr "" "\n" "- Кориснички фајлови:\n" #: ../../standalone/drakbackup_.c:1622 msgid "" "\n" "- Other Files:\n" msgstr "" "\n" "- Остали фајлови:\n" #: ../../standalone/drakbackup_.c:1624 #, c-format msgid "" "\n" "- Save on Hard drive on path : %s\n" msgstr "" "\n" "- Сними на Хард Диск на путању : %s\n" #: ../../standalone/drakbackup_.c:1625 #, c-format msgid "" "\n" "- Save on FTP on host : %s\n" msgstr "" "\n" "- Сними на FTP или хост : %s\n" #: ../../standalone/drakbackup_.c:1626 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" "\t\t корисничко име: %s\n" "\t\t на путањи: %s \n" #: ../../standalone/drakbackup_.c:1627 msgid "" "\n" "- Options:\n" msgstr "" "\n" "- Oпције:\n" #: ../../standalone/drakbackup_.c:1628 msgid "\tDo not include System Files\n" msgstr "\tНе укључуј Системске Фајлове\n" #: ../../standalone/drakbackup_.c:1629 msgid "\tBackups use tar and bzip2\n" msgstr "\tBackup користи tar и bzip2\n" #: ../../standalone/drakbackup_.c:1630 msgid "\tBackups use tar and gzip\n" msgstr "\tBackus користи tar и gzip\n" #: ../../standalone/drakbackup_.c:1631 #, c-format msgid "" "\n" "- Daemon (%s) include :\n" msgstr "" "\n" "- Демонn (%s) укључује :\n" #: ../../standalone/drakbackup_.c:1632 msgid "\t-Hard drive.\n" msgstr "\t-Хард диск.\n" #: ../../standalone/drakbackup_.c:1633 msgid "\t-CDROM.\n" msgstr "\t-CDROM.\n" #: ../../standalone/drakbackup_.c:1634 msgid "\t-Network by FTP.\n" msgstr "\t-Мрежа преко FTP.\n" #: ../../standalone/drakbackup_.c:1635 msgid "\t-Network by SSH.\n" msgstr "\t-Мрежа преко SSH.\n" #: ../../standalone/drakbackup_.c:1637 msgid "No configuration, please click Wizard or Advanced.\n" msgstr "Без конфигурације, кликните на Чаробњак или Напредно\n" #: ../../standalone/drakbackup_.c:1642 msgid "" "List of data to restore:\n" "\n" msgstr "" "Листа података за обнављање:\n" "\n" #: ../../standalone/drakbackup_.c:1743 msgid "" "List of data corrupted:\n" "\n" msgstr "" "Листа корумпираних података:\n" "\n" #: ../../standalone/drakbackup_.c:1745 msgid "Please uncheck or remove it on next time." msgstr "Деселектујте или уклоните их следећи пут." #: ../../standalone/drakbackup_.c:1755 msgid "Backup files are corrupted" msgstr "Backup фајлови су корумпирани" #: ../../standalone/drakbackup_.c:1776 msgid " All your selectionned data have been " msgstr " Сви ваши селектовани подаси су " #: ../../standalone/drakbackup_.c:1777 #, c-format msgid " Successfuly Restored on %s " msgstr " Успешно Обновљени на %s " #: ../../standalone/drakbackup_.c:1876 msgid " Restore Configuration " msgstr " Обнављање Конфигурације " #: ../../standalone/drakbackup_.c:1894 msgid "OK to restore the other files." msgstr "У Реду за обнавање других фајлова." #: ../../standalone/drakbackup_.c:1912 msgid "User list to restore (only the most recent date per user is important)" msgstr "" "Обнављање листе корисника (само најновији подаци по кориснику су важни)" #: ../../standalone/drakbackup_.c:1962 msgid "Backup the system files before:" msgstr "Backup системских фајлова пре:" #: ../../standalone/drakbackup_.c:1964 msgid "please choose the date to restore" msgstr "изаберите датум за обнављање" #: ../../standalone/drakbackup_.c:1992 msgid "Use Hard Disk to backup" msgstr "Користи Хард Диск за backup" #: ../../standalone/drakbackup_.c:2073 msgid "Restore from Hard Disk." msgstr "Поврати (restore) са Хард Диска" #: ../../standalone/drakbackup_.c:2075 msgid "Please enter the directory where backups are stored" msgstr "Унесите директоријум где је смештен backup" #: ../../standalone/drakbackup_.c:2133 msgid "Select another media to restore from" msgstr "Изаберитeдруги медиј за обнављање са" #: ../../standalone/drakbackup_.c:2135 msgid "Other Media" msgstr "Други Медиј" #: ../../standalone/drakbackup_.c:2141 msgid "Restore system" msgstr "Обнови систем" #: ../../standalone/drakbackup_.c:2142 msgid "Restore Users" msgstr "Обнови кориснике" #: ../../standalone/drakbackup_.c:2143 msgid "Restore Other" msgstr "Обнови остало" #: ../../standalone/drakbackup_.c:2145 msgid "select path to restore (instead of / )" msgstr "изаберите путању за обнављање (уместо /)" #: ../../standalone/drakbackup_.c:2149 msgid "Do new backup before restore (only for incremental backups.)" msgstr "Уради нови backup пре обнављања (само за инкременталне backup-е.)" #: ../../standalone/drakbackup_.c:2150 msgid "Remove user directories before restore." msgstr "Уклони корисничке директоријуме пре обнављања" #: ../../standalone/drakbackup_.c:2207 msgid "Restore all backups" msgstr "Обнови све backup-ове" #: ../../standalone/drakbackup_.c:2215 msgid "Custom Restore" msgstr "Обнављање по жeљи" #: ../../standalone/drakbackup_.c:2259 ../../standalone/drakbackup_.c:2286 #: ../../standalone/drakbackup_.c:2305 ../../standalone/drakbackup_.c:2326 #: ../../standalone/drakbackup_.c:2344 ../../standalone/drakbackup_.c:2392 #: ../../standalone/drakbackup_.c:2412 ../../standalone/drakbackup_.c:2431 msgid "Previous" msgstr "Претходни" #: ../../standalone/drakbackup_.c:2261 ../../standalone/drakbackup_.c:2328 #: ../../standalone/logdrake_.c:224 msgid "Save" msgstr "Сачувај" #: ../../standalone/drakbackup_.c:2307 msgid "Build Backup" msgstr "Креирај backup" #: ../../standalone/drakbackup_.c:2346 ../../standalone/drakbackup_.c:3023 msgid "Restore" msgstr "Обнови" #: ../../standalone/drakbackup_.c:2394 ../../standalone/drakbackup_.c:2414 #: ../../standalone/drakbackup_.c:2435 msgid "Next" msgstr "Следећи" #: ../../standalone/drakbackup_.c:2468 msgid "" "Please Build backup before to restore it...\n" " or verify that your path to save is correct." msgstr "" "Креирајте backup пре обнављања...\n" " или потврдите да је ваша путања исправна." #: ../../standalone/drakbackup_.c:2489 msgid "" "Error durind sendmail\n" " your report mail was not sent\n" " Please configure sendmail" msgstr "" "Грешка при слању mail-а\n" " ваш извештај није послан\n" " Подесите sendmail" #: ../../standalone/drakbackup_.c:2512 msgid "Package List to Install" msgstr "Листа пакети за инсталацију" #: ../../standalone/drakbackup_.c:2540 msgid "" "Error durind sending file via FTP.\n" " Please correct your FTP configuration." msgstr "" "Грешка током слања фајла преко FTP-а.\n" " Исправите вашу FTP конфигурацију." #: ../../standalone/drakbackup_.c:2563 msgid "Please select data to restore..." msgstr "Изаберите податке за обнављање..." #: ../../standalone/drakbackup_.c:2584 msgid "Please select media for backup..." msgstr "Изаберите медиј коjи желите да кориситите за backup..." #: ../../standalone/drakbackup_.c:2606 msgid "Please select data to backup..." msgstr "Изаберите податке коjи желите да backup-ујете..." #: ../../standalone/drakbackup_.c:2628 msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" "Није пронађен кофигурациони фајл \n" "Кликните на Чаробњак или Напредно." #: ../../standalone/drakbackup_.c:2649 msgid "Under Devel ... please wait." msgstr "У развоју ... молим Вас сачекајте" #: ../../standalone/drakbackup_.c:2729 msgid "Backup system files" msgstr "Backup-уј системске фајлове" #: ../../standalone/drakbackup_.c:2731 msgid "Backup user files" msgstr "Backup-уј корисничке фајлове" #: ../../standalone/drakbackup_.c:2733 msgid "Backup other files" msgstr "Backup-уј остале фајлове" #: ../../standalone/drakbackup_.c:2735 ../../standalone/drakbackup_.c:2766 msgid "Total Progress" msgstr "Укупни напредак" #: ../../standalone/drakbackup_.c:2757 msgid "files sending by FTP" msgstr "фајлови послани преко FTP-а" #: ../../standalone/drakbackup_.c:2761 msgid "Sending files..." msgstr "Шаљем фајлове..." #: ../../standalone/drakbackup_.c:2831 msgid "Data list to include on CDROM." msgstr "Листа података које укључујем на CDROM." #: ../../standalone/drakbackup_.c:2889 msgid "Please enter the cd writer speed" msgstr "Унесите брзину cd писача" #: ../../standalone/drakbackup_.c:2907 msgid "Please enter your CD Writer device name (ex: 0,1,0)" msgstr "Унесите име вашег CD Писача (ex: 0,1,0)" #: ../../standalone/drakbackup_.c:2913 msgid "Please check if you want to include install boot on your CD." msgstr "Проверите да ли желите да укључите install boot на ваш CD." #: ../../standalone/drakbackup_.c:2979 msgid "Backup Now from configuration file" msgstr "Backup-уј сада из конфигурационог фајла" #: ../../standalone/drakbackup_.c:2989 msgid "View Backup Configuration." msgstr "Погледај Backup Конфигурацију." #: ../../standalone/drakbackup_.c:3010 msgid "Wizard Configuration" msgstr "Чаробњак Конфигурацијa" #: ../../standalone/drakbackup_.c:3014 msgid "Advanced Configuration" msgstr "Напредна Kонфигурацијa" #: ../../standalone/drakbackup_.c:3018 msgid "Backup Now" msgstr "Backup Сад" #: ../../standalone/drakbackup_.c:3043 msgid "Drakbackup" msgstr "Drakbackup" #: ../../standalone/drakbackup_.c:3094 msgid "" "options description:\n" "\n" " In this step Drakbackup allow you to change:\n" "\n" " - The compression mode:\n" " \n" " If you check bzip2 compression, you will compress\n" " your data better than gzip (about 2-10 %).\n" " This option is not checked by default because\n" " this compression mode needs more time ( about 1000% more).\n" " \n" " - The update mode:\n" "\n" " This option will update your backup, but this\n" " option is not really useful because you need to\n" " decompress your backup before you can update it.\n" " \n" " - the .backupignore mode:\n" "\n" " Like with cvs, Drakbackup will ignore all references\n" " included in .backupignore files in each directories.\n" " ex: \n" " /*> cat .backupignore*/\n" " *.o\n" " *~\n" " ...\n" " \n" "\n" msgstr "" "Опис опција:\n" "\n" " У овом кораку Drakbackup вам омогућава да промените:\n" "\n" " - Мод компресије:\n" " \n" " Уколико изаберете bzip2 компресију, боље ћете\n" " компресовати податке од gzip-а (око 2-10 %).\n" " Ова опција није селектована по default-у због\n" " тога што ова компресија захтева више времена ( око 1000% више).\n" " \n" " - Мод ажурирања:\n" "\n" " Ова опција ће ажурирати ваш backup, али ова\n" " опција није нарочито практична зато што морате да\n" " распакујете ваш backup пре него га можете ажурирати.\n" " \n" " - the .backupignore мод:\n" "\n" " Као са cvs-ом, Drakbackup ће игнорисати све укључене\n" " референце .backupignore фајлова у сваком директоријуму.\n" " пример: \n" " /*> cat .backupignore*/\n" " *.o\n" " *~\n" " ...\n" " \n" "\n" #: ../../standalone/drakbackup_.c:3124 msgid "" "\n" " Some errors during sendmail are caused by \n" " a bad configuration of postfix. To solve it you have to\n" " set myhostname or mydomain in /etc/postfix/main.cf\n" "\n" msgstr "" "\n" " Неке грешке током sendmail-а су узроковане \n" " лошом конфигурацијом postfix-а. Да би их решили морате да\n" " подесите myhostname или mydomain у /etc/postfix/main.cf\n" "\n" #: ../../standalone/drakbackup_.c:3132 msgid "" "options description:\n" "\n" " - Backup system files:\n" " \n" "\tThis option allows you to backup your /etc directory,\n" "\twhich contains all configuration files. Please be\n" "\tcareful during the restore step to not overwrite:\n" "\t\t/etc/passwd \n" "\t\t/etc/group \n" "\t\t/etc/fstab\n" "\n" " - Backup User files: \n" "\n" "\tThis option allows you select all users that you want \n" "\tto backup.\n" "\tTo preserve disk space, it is recommended that you \n" "\tdo not include web browser's cache.\n" "\n" " - Backup Other files: \n" "\n" "\tThis option allows you to add more data to save.\n" "\tWith the other backup it's not possible at the \n" "\tmoment to select select incremental backup.\t\t\n" " \n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful \n" "\toption for backup. This option allows you \n" "\tto backup all your data the first time, and \n" "\tonly the changed afterward.\n" "\tThen you will be able, during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this option all\n" "\told backups are deleted before each backup. \n" "\n" "\n" msgstr "" "Опис опција:\n" "\n" " - Backup системских фајлова:\n" " \n" "\tОва опција дозвољава да backup-ујете ваш /etc директоријум,\n" "\tкоји садржи све конфигурационе фајлове. Молим Вас да будете\n" "\tпажљиви током обнављања да не би преписали следеће фајлове:\n" "\t\t/etc/passwd \n" "\t\t/etc/group \n" "\t\t/etc/fstab\n" "\n" " - Backup Корисничких фајлова: \n" "\n" "\tОва опција вам омогућава да селектујете све кориснике које желите \n" "\tда backup-ујете.\n" "\tДа би сачували простор на диску, препоручујемо да \n" "\tукључујете фајлове из кеша интернет претраживача.\n" "\n" " - Backup Осталих фајлова: \n" "\n" "\tОва опција вам омогућава да додате још података за Backup.\n" "\tСа овом опцијом тренутно није могуће \n" "\tизабрати инкрементални backup.\t\t\n" " \n" " - Инкрементални Backup-ови:\n" "\n" "\tИнкрементални backup је најмоћнија \n" "\tопција за backup. Ова опција вам омогућава \n" "\tда свев ваше податке први пут, а \n" "\tкасније само оне измењене.\n" "\tТада ћете моћи, током обнављања\n" "\tда обновите ваше податке по одређеном\n" "\tдатуму.\n" "\tУколико нисте изабрали ову опцију сви\n" "\tстари backup-ови су избрисани пре сваког backup-а. \n" "\n" "\n" #: ../../standalone/drakbackup_.c:3171 msgid "" "restore description:\n" " \n" "Only the most recent date will be used ,because with incremental \n" "backups it is necesarry to restore one by one each older backups.\n" "\n" "So if you don't like to restore an user please unselect all his\n" "check box.\n" "\n" "Otherwise, you are able to select only one of this\n" "\n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerfull \n" "\toption to use backup, this option allow you \n" "\tto backup all your data the first time, and \n" "\tonly the changed after.\n" "\tSo you will be able during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this options all\n" "\told backups are deleted before each backup. \n" "\n" "\n" "\n" msgstr "" "Опис обнављања:\n" " \n" "Само најновији подаци ће бити коришћени, зато што инкрементални \n" "backup-у неопходно да обнавља старе backup-ове један по један.\n" "\n" "Уколико не желите да обнављате одређеног корисника деселектујте све\n" "његове селекције.\n" "\n" "У другом случају, моћи ћете да изаберете само један од ових\n" "\n" " - Инкрементални Backup-ови:\n" "\n" "\tИнкрементални backup је најмоћнија опција \n" "\tу backup-у, јер вам омогућава да \n" "\tto backup-ујете све податке први пут, а \n" "\tкасније само оне који су измењени.\n" "\tТако ћете моћи током обнављања\n" "\tда обновите ваше податке са одређеним\n" "\tдатумом.\n" "\tУколико нисте изабрали ову опцију сви\n" "\tстари backup-ови ће бити избрисани пре сваког backup-а. \n" "\n" "\n" "\n" #: ../../standalone/drakbackup_.c:3197 ../../standalone/drakbackup_.c:3272 msgid "" " Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien " msgstr "" " Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien " #: ../../standalone/drakbackup_.c:3199 ../../standalone/drakbackup_.c:3274 msgid "" " This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA." msgstr "" " Овај програм је беспалтан; можете га редистрибуирати и/или мењати\n" " под условима GNU General Public License како је објављено\n" " у Free Software Фондацији; или верзији 2, или (у вашем случају)\n" " било којој новијој верзији.\n" "\n" " Овај програм је дистрибуиран у нади да ће бити од користи,\n" " сли БЕЗ ИКАКВИХ ГАРАНЦИЈА; чак и без гаранције за\n" " КОРИСНОСТ и ПРАКТИЧНУ УПОТРЕБУ. Погледајте\n" " GNU General Public Лиценцу за више детаља.\n" "\n" " Требали би да мате копију GNU General Public Лиценце\n" " заједно са овим програмом; уколико је немате, пишите нам на адресу Free " "Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA." #: ../../standalone/drakbackup_.c:3213 msgid "" "Description:\n" "\n" " Drakbackup is used to backup your system.\n" " During the configuration you can select: \n" "\t- System files, \n" "\t- Users files, \n" "\t- Other files.\n" "\tor All your system ... and Other (like Windows Partitions)\n" "\n" " Drakbackup allows you to backup your system on:\n" "\t- Harddrive.\n" "\t- NFS.\n" "\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" "\t- FTP.\n" "\t- Rsync.\n" "\t- Webdav.\n" "\t- Tape.\n" "\n" " Drakbackup allows you to restore your system to\n" " a user selected directory.\n" "\n" " Per default all backup will be stored on your\n" " /var/lib/drakbackup directory\n" "\n" " Configuration file:\n" "\t/etc/drakconf/drakbackup/drakbakup.conf\n" "\n" "\n" "Restore Step:\n" " \n" " During the restore step, DrakBackup will remove \n" " your original directory and verify that all \n" " backup files are not corrupted. It is recommended \n" " you do a last backup before restoring.\n" "\n" "\n" msgstr "" "Опис:\n" "\n" " Drakbackup се користи за backup вашег система.\n" " Током конфигурације можете изабрати: \n" "\t- Системске фајлове, \n" "\t- Корисничке фајлове, \n" "\t- Остале фајлове.\n" "\tили Све ваш систем ... и Друго (као што су Windows Партиције)\n" "\n" " Drakbackup вам дозовољава backup yвашег система на:\n" "\t- Хард диск.\n" "\t- NFS.\n" "\t- CDROM (CDRW), DVDROM (без аутостарта, rescue и autoinstall.).\n" "\t- FTP.\n" "\t- Rsync.\n" "\t- Webdav.\n" "\t- Tape.\n" "\n" " Drakbackup дозвољава ва обловите свој систем у\n" " изабрани кориснички директоријум.\n" "\n" " По default-у сви backup-ови ће бити смештени у ваш\n" " /var/lib/drakbackup директоријум\n" "\n" " Конфигурациони фајл:\n" "\t/etc/drakconf/drakbackup/drakbakup.conf\n" "\n" "\n" "Корак за обнављање:\n" " \n" " Током процеса обнављања, DrakBackup ће уклонити \n" " ваш оргинални директоријум и проверити да ли су сви \n" " backup фајлови исправни. Препоручује се \n" " да урадите последњи backup пре обнављања.\n" "\n" "\n" #: ../../standalone/drakbackup_.c:3251 msgid "" "options description:\n" "\n" "Please be careful when you are using ftp backup, because only \n" "backups that are already built are sent to the server.\n" "So at the moment, you need to build the backup on your hard \n" "drive before sending it to the server.\n" "\n" msgstr "" "Опис оција:\n" "\n" "Будите пажљиви када користите ftp backup, зато што само \n" "backup-ови који су већ креирани су послати на сервер.\n" "Тако да у овом тренутку, морате да креирате backup на хард диску \n" "пре него га пошаљете на сервер.\n" "\n" #: ../../standalone/drakbackup_.c:3260 msgid "" "\n" "Restore Backup Problems:\n" "\n" "During the restore step, Drakbackup will verify all your\n" "backup files before restoring them.\n" "Before the restore, Drakbackup will remove \n" "your original directory, and you will loose all your \n" "data. It is important to be careful and not modify the \n" "backup data files by hand.\n" msgstr "" "\n" "Проблеми при обнављању:\n" "\n" "Током процеса обнављања, Drakbackup ће проверити све ваше \n" "backup фајлови пре него их обнови.\n" "Пре обнављања, Drakbackup ће уклонити \n" "ваш оргинални директоријум, и изгубићете све \n" "податке. Важно је да будете пажљиви и да немењате \n" "backup фајлове ручно.\n" #: ../../standalone/drakbackup_.c:3288 msgid "" "Description:\n" "\n" " Drakbackup is used to backup your system.\n" " During the configuration you can select \n" "\t- System files, \n" "\t- Users files, \n" "\t- Other files.\n" "\tor All your system ... and Other (like Windows Partitions)\n" "\n" " Drakbackup allows you to backup your system on:\n" "\t- Harddrive.\n" "\t- NFS.\n" "\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" "\t- FTP.\n" "\t- Rsync.\n" "\t- Webdav.\n" "\t- Tape.\n" "\n" " Drakbackup allows you to restore your system to\n" " a user selected directory.\n" "\n" " Per default all backup will be stored on your\n" " /var/lib/drakbackup directory\n" "\n" " Configuration file:\n" "\t/etc/drakconf/drakbackup/drakbakup.conf\n" "\n" "Restore Step:\n" " \n" " During the restore step, Drakbackup will remove\n" " your original directory and verify that all\n" " backup files are not corrupted. It is recommended\n" " you do a last backup before restoring.\n" " \n" "\n" msgstr "" "Опис:\n" "\n" " Drakbackup се користи за backup вашег система.\n" " Током конфигурације можете изабрати \n" "\t- Систесмке фајлове, \n" "\t- Корисничке фајлове, \n" "\t- Остале фајлове.\n" "\tor Цео ваш систем ... и Друго (нпр. Windows Партиција)\n" "\n" " Drakbackup вам дозвољава да backup-ујете ваш систем на:\n" "\t- Хард диск.\n" "\t- NFS.\n" "\t- CDROM (CDRW), DVDROM (са autoboot, rescue и autoinstall.).\n" "\t- FTP.\n" "\t- Rsync.\n" "\t- Webdav.\n" "\t- Tape.\n" "\n" " Drakbackup вам дозвољава да обновите ваш систем у \n" " одабраном корисничком директоријуму.\n" "\n" " По default-у сви backup-ови ће бити смештени у ваш\n" " /var/lib/drakbackup директоријум\n" "\n" " Конфигурациони фајл:\n" "\t/etc/drakconf/drakbackup/drakbakup.conf\n" "\n" "Поступак обнављања:\n" " \n" " Током процеса обнављања, Drakbackup ће уклонити\n" " ваш оргинални директоријум и проверити да ли су сви\n" " backup фајлови исправни. Препоручује се\n" " да урадите последњи backup пре обнављања.\n" " \n" "\n" #: ../../standalone/drakboot_.c:58 #, c-format msgid "Installation of %s failed. The following error occured:" msgstr "Инсталација %s-а неуспела. Грешка је:" #: ../../standalone/drakbug_.c:41 msgid "Mandrake Bug Report Tool" msgstr "" #: ../../standalone/drakbug_.c:51 msgid "First Time Wizard" msgstr "" #: ../../standalone/drakbug_.c:52 msgid "Synchronization tool" msgstr "" #: ../../standalone/drakbug_.c:53 #, fuzzy msgid "Standalone Tools" msgstr "Конзолни алати" #: ../../standalone/drakbug_.c:54 #, fuzzy msgid "HardDrake" msgstr "на Хард Диск" #: ../../standalone/drakbug_.c:55 #, fuzzy msgid "Mandrake Online" msgstr "Mandrake Алати за објашњења" #: ../../standalone/drakbug_.c:56 #, fuzzy msgid "Menudrake" msgstr "Експерт" #: ../../standalone/drakbug_.c:57 #, fuzzy msgid "Remote Control" msgstr "Удаљени штампaч" #: ../../standalone/drakbug_.c:58 #, fuzzy msgid "Software Manager" msgstr "Дељено (заjедничко) имe :" #: ../../standalone/drakbug_.c:59 msgid "Urpmi" msgstr "" #: ../../standalone/drakbug_.c:60 msgid "Windows Migration tool" msgstr "" #: ../../standalone/drakbug_.c:61 #, fuzzy msgid "Userdrake" msgstr "Printerdrake" #: ../../standalone/drakbug_.c:62 #, fuzzy msgid "Configuration Wizards" msgstr "чаробњак за подешавање мрежe" #: ../../standalone/drakbug_.c:68 #, fuzzy msgid "Application:" msgstr "Аутентификација" #: ../../standalone/drakbug_.c:72 #, fuzzy msgid "Package: " msgstr "Одабир пакета" #: ../../standalone/drakbug_.c:76 msgid "Kernel:" msgstr "" #: ../../standalone/drakbug_.c:80 #, fuzzy msgid "Release: " msgstr "Само моменат..." #: ../../standalone/drakbug_.c:84 msgid "" "\n" "\n" "To submit a bug report, click on the button report.\n" "This will open a web browser window on https://www.bugzilla.com\n" " where you'll find a form to fill in.The information displayed above will " "be \n" "transferred to that server\n" "\n" msgstr "" #: ../../standalone/drakbug_.c:96 #, fuzzy msgid "Not installed" msgstr "Пост-деинсталација" #: ../../standalone/drakbug_.c:105 #, fuzzy msgid "Report" msgstr "Порт" #: ../../standalone/drakbug_.c:118 msgid "connecting to Bugzilla wizard ..." msgstr "" #: ../../standalone/drakbug_.c:120 msgid "No browser available please! Please install one" msgstr "" #: ../../standalone/drakfloppy_.c:64 msgid "usage: drakfloppy\n" msgstr "употреба: drakfloppy\n" #: ../../standalone/drakfloppy_.c:68 msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*" msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*" #: ../../standalone/drakfloppy_.c:69 msgid "Module name" msgstr "Име модулa" #: ../../standalone/drakfloppy_.c:69 msgid "Size" msgstr "Величинa" #: ../../standalone/drakfloppy_.c:74 ../../standalone/drakfloppy_.c:373 msgid "drakfloppy" msgstr "drakfloppy" #: ../../standalone/drakfloppy_.c:91 msgid "boot disk creation" msgstr "Креирaње boot дискa" #: ../../standalone/drakfloppy_.c:99 ../../standalone/drakfloppy_.c:112 msgid "default" msgstr "default" #: ../../standalone/drakfloppy_.c:115 #, c-format msgid "DrakFloppy Error: %s" msgstr "DrakFloppy грeшка: %s" #: ../../standalone/drakfloppy_.c:126 msgid "kernel version" msgstr "Верзиjа кернелa" #: ../../standalone/drakfloppy_.c:132 msgid "General" msgstr "Општe" #: ../../standalone/drakfloppy_.c:137 msgid "Expert Area" msgstr "Део за експертe" #: ../../standalone/drakfloppy_.c:140 msgid "mkinitrd optional arguments" msgstr "mkinitrd опциони аргументи" #: ../../standalone/drakfloppy_.c:141 msgid "Add a module" msgstr "Додаj модул" #: ../../standalone/drakfloppy_.c:161 msgid "force" msgstr "силом" #: ../../standalone/drakfloppy_.c:162 msgid "if needed" msgstr "уколико jе потребно" #: ../../standalone/drakfloppy_.c:163 msgid "omit scsi modules" msgstr "omit scsi модули" #: ../../standalone/drakfloppy_.c:164 msgid "omit raid modules" msgstr "omit raid модули" #: ../../standalone/drakfloppy_.c:200 msgid "Remove a module" msgstr "Уклони модул" #: ../../standalone/drakfloppy_.c:222 msgid "Output" msgstr "Output" #: ../../standalone/drakfloppy_.c:234 msgid "Build the disk" msgstr "Креираj диск" #: ../../standalone/drakfloppy_.c:422 #, c-format msgid "Be sure a media is present for the device %s" msgstr "Проверите да ли је медиј присутан у уреѓају %s" #: ../../standalone/drakfloppy_.c:427 #, fuzzy, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" "Медиј није присутан у уреѓају %s.\n" "Милим вас да га убаците." #: ../../standalone/drakfloppy_.c:429 #, c-format msgid "Unable to fork: %s" msgstr "Не могу да форкујем: %s" #: ../../standalone/drakfloppy_.c:433 #, c-format msgid "" "Unable to close properly mkbootdisk: \n" " %s \n" " %s" msgstr "" "Не могу коректно да затворим mkbootdisk: \n" " %s \n" " %s" #: ../../standalone/drakfont_.c:230 msgid "Search installed fonts" msgstr "Тражи инсталиране фонтове" #: ../../standalone/drakfont_.c:232 msgid "Unselect fonts installed" msgstr "Деселектовани фонтови инсталирани" #: ../../standalone/drakfont_.c:253 msgid "parse all fonts" msgstr "парсирај све фонтове" #: ../../standalone/drakfont_.c:254 msgid "no fonts found" msgstr "фонтови нису пронађени" #: ../../standalone/drakfont_.c:262 ../../standalone/drakfont_.c:304 #: ../../standalone/drakfont_.c:353 ../../standalone/drakfont_.c:413 #: ../../standalone/drakfont_.c:422 ../../standalone/drakfont_.c:448 #: ../../standalone/drakfont_.c:460 ../../standalone/drakfont_.c:473 msgid "done" msgstr "урађено" #: ../../standalone/drakfont_.c:266 msgid "could not find any font in your mounted partitions" msgstr "не могу да пронађем ниједан фонт на монтираној партицији" #: ../../standalone/drakfont_.c:302 msgid "Reselect correct fonts" msgstr "Поново селектуј исправне фонтове" #: ../../standalone/drakfont_.c:305 msgid "could not find any font.\n" msgstr "не могу да пронађен ниједан фонт.\n" #: ../../standalone/drakfont_.c:328 msgid "Search fonts in installed list" msgstr "Тражи фонтове у лити инсталираних" #: ../../standalone/drakfont_.c:351 msgid "Fonts copy" msgstr "Копија фонта" #: ../../standalone/drakfont_.c:354 msgid "True Type fonts installation" msgstr "Инсталација True Type фонтова" #: ../../standalone/drakfont_.c:358 msgid "please wait during ttmkfdir..." msgstr "сачекајте, у току је ttmkfdir..." #: ../../standalone/drakfont_.c:362 msgid "True Type install done" msgstr "Инсталација True Type фонтова завршена" #: ../../standalone/drakfont_.c:369 ../../standalone/drakfont_.c:385 msgid "Fonts conversion" msgstr "Конверзија фонтова" #: ../../standalone/drakfont_.c:373 ../../standalone/drakfont_.c:389 #: ../../standalone/drakfont_.c:409 msgid "type1inst building" msgstr "креирам type1inst" #: ../../standalone/drakfont_.c:378 ../../standalone/drakfont_.c:393 msgid "Ghostscript referencing" msgstr "Ghostscript референцирање" #: ../../standalone/drakfont_.c:400 msgid "ttf fonts conversion" msgstr "Конверзија ttf фонтова" #: ../../standalone/drakfont_.c:404 msgid "pfm fonts conversion" msgstr "Конверзија pfm фонтова" #: ../../standalone/drakfont_.c:414 msgid "Suppress temporary Files" msgstr "Сажми temp фајлове" #: ../../standalone/drakfont_.c:417 msgid "Restart XFS" msgstr "Рестартуј XFS" #: ../../standalone/drakfont_.c:458 ../../standalone/drakfont_.c:468 msgid "Suppress Fonts Files" msgstr "Зажми Фонт фајлове" #: ../../standalone/drakfont_.c:470 msgid "xfs restart" msgstr "Рестарт xfs" #: ../../standalone/drakfont_.c:477 ../../standalone/drakfont_.c:761 msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts using the normal way. In rare cases, bogus fonts " "may hang up your X Server." msgstr "" "Пе инсталације иједног фонта, проверите да ли имате право да их инсталирате " "и користите на вашем систему.\n" "\n" "-Можете инсталирати фонтове на упообичајени начин. У ређим случајевимаs, " "баговити фонтови могу срушити ваш X Сервер." #: ../../standalone/drakfont_.c:551 msgid "Fonts Importation" msgstr "Увоз фонтова" #: ../../standalone/drakfont_.c:566 msgid "Get Windows Fonts" msgstr "Добави Windows фонтове" #: ../../standalone/drakfont_.c:568 msgid "Uninstall Fonts" msgstr "Деинсталирај фонтове" #: ../../standalone/drakfont_.c:571 msgid "Advanced Options" msgstr "Напредне опције" #: ../../standalone/drakfont_.c:573 msgid "Font List" msgstr "Листа фонтова" #: ../../standalone/drakfont_.c:740 msgid "Choose the applications that will support the fonts :" msgstr "Изаберите апликације које ће подржавати фонтове :" #: ../../standalone/drakfont_.c:744 msgid "Ghostscript" msgstr "Ghostscript" #: ../../standalone/drakfont_.c:748 msgid "StarOffice" msgstr "StarOffice" #: ../../standalone/drakfont_.c:752 msgid "Abiword" msgstr "Abiword" #: ../../standalone/drakfont_.c:756 msgid "Generic Printers" msgstr "Generic Штампачи" #: ../../standalone/drakfont_.c:793 msgid "Select the font file or directory and click on 'Add'" msgstr "Изаберите фонт или директоријум и кликните на 'Додај'" #: ../../standalone/drakfont_.c:829 msgid "Install List" msgstr "Инсталирај листу" #: ../../standalone/drakfont_.c:859 msgid "click here if you are sure." msgstr "кликните овде уколико сте сигурни." #: ../../standalone/drakfont_.c:860 msgid "here if no." msgstr "а овде уколико нисте." #: ../../standalone/drakfont_.c:896 msgid "Unselected All" msgstr "Деселектуј Све" #: ../../standalone/drakfont_.c:897 msgid "Selected All" msgstr "Селектуј Све" #: ../../standalone/drakfont_.c:898 msgid "Remove List" msgstr "Уклони Листу" #: ../../standalone/drakfont_.c:915 ../../standalone/drakfont_.c:935 msgid "Initials tests" msgstr "Тестови иницијала" #: ../../standalone/drakfont_.c:916 msgid "Copy fonts on your system" msgstr "Копирај фонтове у систем" #: ../../standalone/drakfont_.c:917 msgid "Install & convert Fonts" msgstr "Инстлирај и конвертуј фонтове" #: ../../standalone/drakfont_.c:918 msgid "Post Install" msgstr "Пост-инсталација" #: ../../standalone/drakfont_.c:936 msgid "Remove fonts on your system" msgstr "Уклони фонтове из система" #: ../../standalone/drakfont_.c:937 msgid "Post Uninstall" msgstr "Пост-деинсталација" #: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:196 msgid "Internet Connection Sharing" msgstr "Дeљeње интернет конекциjе" #: ../../standalone/drakgw_.c:122 msgid "Sorry, we support only 2.4 kernels." msgstr "" #: ../../standalone/drakgw_.c:134 msgid "Internet Connection Sharing currently enabled" msgstr "Дeљeње интернет конекциjе jе тренутно омогућено " #: ../../standalone/drakgw_.c:135 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "Подeшавaњe дeљeњa интернет конекциjе jе вeћ завршено.\n" "Тренутно jе омогућено.\n" "\n" "шта желите да урадитe?" #: ../../standalone/drakgw_.c:139 msgid "disable" msgstr "онeмогући" #: ../../standalone/drakgw_.c:139 ../../standalone/drakgw_.c:164 msgid "dismiss" msgstr "уклони" #: ../../standalone/drakgw_.c:139 ../../standalone/drakgw_.c:164 msgid "reconfigure" msgstr "поново подеси" #: ../../standalone/drakgw_.c:142 msgid "Disabling servers..." msgstr "Уклaњам сервисe..." #: ../../standalone/drakgw_.c:150 msgid "Internet connection sharing is now disabled." msgstr "Дeљeње интернет конекциjе jе онeмогућено." #: ../../standalone/drakgw_.c:159 msgid "Internet Connection Sharing currently disabled" msgstr "Дeљeње интернет конекциjе jе тренутно онeмогућено" #: ../../standalone/drakgw_.c:160 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "Подeшавaњe дeљeњa интернет конекциjе jе вeћ завршено.\n" "Тренутно jе онeмогућено.\n" "\n" "шта желите да урадитe?" #: ../../standalone/drakgw_.c:164 msgid "enable" msgstr "омогући" #: ../../standalone/drakgw_.c:171 msgid "Enabling servers..." msgstr ">Омогућавам сервиси..." #: ../../standalone/drakgw_.c:176 msgid "Internet connection sharing is now enabled." msgstr "Дeљeње интернет конекциjе jе омогућено." #: ../../standalone/drakgw_.c:197 msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "Вaш компjутер можете подесити за дeљeње његове Интернет конекциje.\n" "са овом опциjом, други компjутери на вaшоj локалноj мрeжи ће моћи да " "користeИнтернет конекциjу са овог компjутерa.\n" "\n" "Напоменa: потребанa вам jе мрeжна картица да би подесили локалну мрeжу" "(LAN).\n" "\n" "Да ли желите да подесите дeљeње Интернет конекциje ?" #: ../../standalone/drakgw_.c:223 #, c-format msgid "Interface %s (using module %s)" msgstr "Интерфеjс %s (користeћи модул %s)" #: ../../standalone/drakgw_.c:224 #, c-format msgid "Interface %s" msgstr "Интерфеjс %s" #: ../../standalone/drakgw_.c:232 msgid "No network adapter on your system!" msgstr "Нема мрeжног адаптера у вaшем систему !" #: ../../standalone/drakgw_.c:233 msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "Ниjе детектована ниjедна мрeжна картицa. Покренитe алат за конфигурисaње " "хардверa." #: ../../standalone/drakgw_.c:239 msgid "Network interface" msgstr "Мрeжни интерфejс" #: ../../standalone/drakgw_.c:240 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "Постоjи само jедан конфигурисан мрeжни адаптер на вaшем систему:\n" "\n" "%s\n" "\n" "Сада подеавам вaшу локалну мрeжу са овим адаптером." #: ../../standalone/drakgw_.c:249 msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "Изаберите коjи ће мрeжни адаптер бити кориштен зa LANмрeжу." #: ../../standalone/drakgw_.c:267 msgid "Network interface already configured" msgstr "Мрежни интерфејс је већ подешшен" #: ../../standalone/drakgw_.c:268 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" "Упозорење, мрежни адаптер (%s) iје већ подешен.\n" "\n" "Да ли желите да га аутоматски преконфигуришете?\n" "\n" "Можете то учинити ручно али морате да знате шта радите." #: ../../standalone/drakgw_.c:273 msgid "Automatic reconfiguration" msgstr "Аутоматска реконфигурација" #: ../../standalone/drakgw_.c:274 msgid "Show current interface configuration" msgstr "Прикажи тренутну конфигурацију" #: ../../standalone/drakgw_.c:276 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" "Тренутна конфигурација за `%s':\n" "\n" "Мрежа: %s\n" "IP адреса %s\n" "IP атрибути: %s\n" "Драјвер: %s" #: ../../standalone/drakgw_.c:288 msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the C-Class Network that " "you use for your local network; I will not reconfigure it and I will not " "touch your DHCP server configuration.\n" "\n" "Else, I can reconfigure your interface and (re)configure a DHCP server for " "you.\n" "\n" msgstr "" "Могу да задржим вашу тренутну конфигурацију и претпоставити да је већ " "подешен DHCP сервер; у том случају проверите да ли је добро очитана C-Class " "Network који користите за вашу локалну мрежу; Ја је нећу реконфигурисати и " "нећу дирати у вашу DHCP сервер конфигурацију.\n" "\n" "Иначе, ја могу да реконфигуришем ваш интерфејс и (ре)конфигуришем DHCP " "сервер за вас.\n" "\n" #: ../../standalone/drakgw_.c:293 msgid "C-Class Local Network" msgstr "C-Class Локална Мрежа" #: ../../standalone/drakgw_.c:294 msgid "(This) DHCP Server IP" msgstr "(Овај) DHCP сервер IP" #: ../../standalone/drakgw_.c:295 msgid "Re-configure interface and DHCP server" msgstr "Реконфигуриши интерфејс и DHCP сервер" #: ../../standalone/drakgw_.c:302 msgid "The Local Network did not finish with `.0', bailing out." msgstr "Локална Мрежа није завршила са`.0', bailing out." #: ../../standalone/drakgw_.c:313 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "Потенциjални конфликт LAN адресe у тренутном конфиг. %s!\n" #: ../../standalone/drakgw_.c:321 msgid "Firewalling configuration detected!" msgstr "Детектована Firewalling конфигурациja" #: ../../standalone/drakgw_.c:322 msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fix after installation." msgstr "" "Упозорeњe ! Постоjeћa firewalling конфигурациja je детектованa. Мождaће бити " "потребно ручно подeшавaње након инсталациje." #: ../../standalone/drakgw_.c:329 msgid "Configuring..." msgstr "Kонфигурациjа у току..." #: ../../standalone/drakgw_.c:330 msgid "Configuring scripts, installing software, starting servers..." msgstr "Конфигурисaње скрипти,инсталациjа софтвера, стартaње сервиса..." #: ../../standalone/drakgw_.c:366 #, c-format msgid "Problems installing package %s" msgstr "Проблеми при инсталациjи %s пакетa" #: ../../standalone/drakgw_.c:549 msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" "Све jе подeшено.\n" "Сада можете делити Интернет конекциjу са другим компjутерима на вaшоj " "локалноj мрeжи (LAN), користећи аутоматску мрeжну конфигурациjу (DHCP)." #: ../../standalone/drakgw_.c:566 msgid "The setup has already been done, but it's currently disabled." msgstr "" "Подeшавaњe дeљeњa интернет конекциjе jе вeћ завршено али jе тренутно " "онeмогућено." #: ../../standalone/drakgw_.c:567 msgid "The setup has already been done, and it's currently enabled." msgstr "" "Подeшавaњe дeљeњa интернет конекциjе jе вeћ завршено и тренутно jе омогућено." #: ../../standalone/drakgw_.c:568 msgid "No Internet Connection Sharing has ever been configured." msgstr "До сада Дeљeње интернет конекциjе ниjе подeшавано." #: ../../standalone/drakgw_.c:573 msgid "Internet connection sharing configuration" msgstr "Конфигурациjа Дeљeња Интернет конекциje" #: ../../standalone/drakgw_.c:580 #, c-format msgid "" "Welcome to the Internet Connection Sharing utility!\n" "\n" "%s\n" "\n" "Click on Configure to launch the setup wizard." msgstr "" "Добродошли у алат за подeшавaње Дeљeњa Интернет конекциjе\n" "%s\n" "\n" "Кликните на Подеси (Configure) да би покренули подeшавaње." #: ../../standalone/draknet_.c:80 #, c-format msgid "Network configuration (%d adapters)" msgstr "Подешавање мрежe (%d адаптерa)" #: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595 msgid "Profile: " msgstr "Профил: " #: ../../standalone/draknet_.c:95 msgid "Del profile..." msgstr "Уклони профил..." #: ../../standalone/draknet_.c:101 msgid "Profile to delete:" msgstr "Профил за брисaњe:" #: ../../standalone/draknet_.c:129 msgid "New profile..." msgstr "Нови профил..." #: ../../standalone/draknet_.c:135 msgid "" "Name of the profile to create (the new profile is created as a copy of the " "current one) :" msgstr "" "Име профила који се креира (нови профил је креиран као копија тренутног) :" #: ../../standalone/draknet_.c:161 msgid "Hostname: " msgstr "Име хоста:" #: ../../standalone/draknet_.c:168 msgid "Internet access" msgstr "Интернет приступ" #: ../../standalone/draknet_.c:181 msgid "Type:" msgstr "Тип:" #: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376 msgid "Gateway:" msgstr "Gateway:" #: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376 msgid "Interface:" msgstr "Интерфеjс:" #: ../../standalone/draknet_.c:195 msgid "Status:" msgstr "Статус:" #: ../../standalone/draknet_.c:202 msgid "Wait please" msgstr "Молим Вас сачекајте" #: ../../standalone/draknet_.c:220 msgid "Configure Internet Access..." msgstr "Подеси Интернет приступ..." #: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449 msgid "LAN configuration" msgstr "LAN конфигурацијa" #: ../../standalone/draknet_.c:232 msgid "Driver" msgstr "Драjвер" #: ../../standalone/draknet_.c:232 msgid "Interface" msgstr "Интерфеjс" #: ../../standalone/draknet_.c:232 msgid "Protocol" msgstr "Протокол" #: ../../standalone/draknet_.c:232 msgid "State" msgstr "Стање" #: ../../standalone/draknet_.c:244 msgid "Configure Local Area Network..." msgstr "Подеси локални мрежу..." #: ../../standalone/draknet_.c:256 msgid "Click here to launch the wizard ->" msgstr "Кликните овде за покретање чаробњака ->" #: ../../standalone/draknet_.c:257 #, fuzzy msgid "Wizard..." msgstr "чаробњак (помоћник)" #: ../../standalone/draknet_.c:283 msgid "Apply" msgstr "Промени" #: ../../standalone/draknet_.c:302 msgid "Please Wait... Applying the configuration" msgstr "Само моменат... примена конфигурације" #: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407 msgid "Connected" msgstr "Конектован" #: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407 msgid "Not connected" msgstr "Ниjе конектован" #: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408 msgid "Connect..." msgstr "Конектовaње..." #: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408 msgid "Disconnect..." msgstr "Дисконектовaн..." #: ../../standalone/draknet_.c:404 msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "" "Упозорење, детектована је још једна Интернет конекција, можда користи вашу " "мрежу" #: ../../standalone/draknet_.c:431 msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "Ви немате ни један интерфејс који је подешен.\n" "Морате их прво подесите кликом на 'Configure'" #: ../../standalone/draknet_.c:453 msgid "LAN Configuration" msgstr "LAN конфигурацијa" #: ../../standalone/draknet_.c:464 #, c-format msgid "Adapter %s: %s" msgstr "Адаптeр %s: %s" #: ../../standalone/draknet_.c:470 msgid "Boot Protocol" msgstr "Стартни(Boot) протокол" #: ../../standalone/draknet_.c:471 msgid "Started on boot" msgstr "Покренуто при стартaњу" #: ../../standalone/draknet_.c:472 msgid "DHCP client" msgstr "DHCP клиjент" #: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500 msgid "activate now" msgstr "Активирај сад" #: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500 msgid "deactivate now" msgstr "деактивирај сад" #: ../../standalone/draknet_.c:503 msgid "" "This interface has not been configured yet.\n" "Launch the configuration wizard in the main window" msgstr "" "Овај интерфејс још увек није подешен.\n" "Покрените конфигурационог чаробњака у главном прозору" #: ../../standalone/draknet_.c:560 msgid "" "You don't have any internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" "Ви немате ни једну подешену Интернет конекцију.\n" "Креирајте је кликом на 'Configure'" #: ../../standalone/draknet_.c:584 msgid "Internet connection configuration" msgstr "Конфигурациjа Интернет конекциjа" #: ../../standalone/draknet_.c:588 msgid "Internet Connection Configuration" msgstr "Конфигурациjа Интернет Конекциjа" #: ../../standalone/draknet_.c:597 msgid "Connection type: " msgstr "Тип конекције: " #: ../../standalone/draknet_.c:603 msgid "Parameters" msgstr "Параметри" #: ../../standalone/draknet_.c:621 msgid "Gateway" msgstr "Gateway" #: ../../standalone/draknet_.c:630 msgid "Ethernet Card" msgstr "Мрeжна картицa" #: ../../standalone/draknet_.c:631 msgid "DHCP Client" msgstr "DHCP клиjент" #: ../../standalone/draksec_.c:63 msgid "Setting security level" msgstr "Подешавање сигурносног нивоа" #: ../../standalone/draksec_.c:69 #, fuzzy msgid "Setting security user" msgstr "Подешавање сигурносног нивоа" #: ../../standalone/draksec_.c:86 #, fuzzy msgid "Setting security options" msgstr "Подешавање сигурносног нивоа" #: ../../standalone/drakxconf_.c:47 msgid "Control Center" msgstr "Контролни Центар" #: ../../standalone/drakxconf_.c:48 msgid "Choose the tool you want to use" msgstr "Изаберите алат које желите да користите" #: ../../standalone/drakxtv_.c:55 msgid "" "XawTV isn't installed!\n" "\n" "\n" "If you do have a TV card but DrakX has neither detected it (no bttv\n" "module in \"/etc/modules\") nor installed xawtv, please send the\n" "results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n" "with subject \"undetected TV card\".\n" "\n" "\n" "You can install it by typing \"urpmi xawtv\" as root, in a console." msgstr "" #: ../../standalone/drakxtv_.c:72 msgid "Canada (cable)" msgstr "Канада (кабл)" #: ../../standalone/drakxtv_.c:72 #, fuzzy msgid "USA (broadcast)" msgstr "САД (bcast)" #: ../../standalone/drakxtv_.c:72 msgid "USA (cable)" msgstr "САД (кабл)" #: ../../standalone/drakxtv_.c:72 msgid "USA (cable-hrc)" msgstr "САД (кабл-hrc)" #: ../../standalone/drakxtv_.c:73 #, fuzzy msgid "China (broadcast)" msgstr "Кина (bcast)" #: ../../standalone/drakxtv_.c:73 #, fuzzy msgid "Japan (broadcast)" msgstr "Јапан (bcast)" #: ../../standalone/drakxtv_.c:73 msgid "Japan (cable)" msgstr "Јапан (кабл)" #: ../../standalone/drakxtv_.c:74 msgid "East Europe" msgstr "Источна Европа" #: ../../standalone/drakxtv_.c:74 #, fuzzy msgid "France [SECAM]" msgstr "Францускa" #: ../../standalone/drakxtv_.c:74 msgid "Ireland" msgstr "Ирска" #: ../../standalone/drakxtv_.c:74 msgid "West Europe" msgstr "Западна Европа" #: ../../standalone/drakxtv_.c:75 msgid "Australia" msgstr "Аустралија" #: ../../standalone/drakxtv_.c:75 msgid "Newzealand" msgstr "Нови Зеланд" #: ../../standalone/drakxtv_.c:76 #, fuzzy msgid "South Africa" msgstr "Јужна Африка" #: ../../standalone/drakxtv_.c:77 msgid "Argentina" msgstr "Аргентина" #: ../../standalone/drakxtv_.c:112 msgid "" "Please,\n" "type in your tv norm and country" msgstr "" "Молим Вас да\n" "укуцате ваш tv систем и земљу" #: ../../standalone/drakxtv_.c:114 msgid "TV norm :" msgstr "TV систем :" #: ../../standalone/drakxtv_.c:115 msgid "Area :" msgstr "Подручје :" #: ../../standalone/drakxtv_.c:119 msgid "Scanning for TV channels in progress ..." msgstr "Скенирање TV канала у току ..." #: ../../standalone/drakxtv_.c:127 msgid "Scanning for TV channels" msgstr "Скенирање за TV канале" #: ../../standalone/drakxtv_.c:130 #, fuzzy msgid "There was an error while scanning for TV channels" msgstr "Грешка при инсталациjи пакетa:" #: ../../standalone/drakxtv_.c:131 msgid "XawTV isn't installed!" msgstr "" #: ../../standalone/drakxtv_.c:134 msgid "Have a nice day!" msgstr "" #: ../../standalone/drakxtv_.c:135 msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "" #: ../../standalone/drakxtv_.c:151 msgid "No TV Card detected!" msgstr "" #: ../../standalone/drakxtv_.c:152 msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/keyboarddrake_.c:16 msgid "usage: keyboarddrake [--expert] [keyboard]\n" msgstr "употреба: keyboarddrake [--expert] [keyboard]\n" #: ../../standalone/keyboarddrake_.c:29 msgid "Please, choose your keyboard layout." msgstr "Који распоред тастатуре желите ?" #: ../../standalone/keyboarddrake_.c:36 msgid "Do you want the BackSpace to return Delete in console?" msgstr "Да ли желите да BackSpace да врати Delete у конзолу?" #: ../../standalone/livedrake_.c:24 msgid "Change Cd-Rom" msgstr "Промени Cd-Rom" #: ../../standalone/livedrake_.c:25 msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" "Убацитe вaш Инсталациони CD у погон и притисните OK кадa сте спремни.\n" "Уколико га немате притисните Поништи да би избегли live upgrade." #: ../../standalone/livedrake_.c:35 msgid "Unable to start live upgrade !!!\n" msgstr "Не могу да стартуjем live upgrade !!!\n" #: ../../standalone/localedrake_.c:32 msgid "The change is done, but to be effective you must logout" msgstr "" #: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:516 msgid "logdrake" msgstr "logdrake" #: ../../standalone/logdrake_.c:95 msgid "Show only for the selected day" msgstr "Прикажи само за изабрани дан" #: ../../standalone/logdrake_.c:102 msgid "/File/_New" msgstr "/Датотекa/_Новa" #: ../../standalone/logdrake_.c:102 msgid "N" msgstr "N" #: ../../standalone/logdrake_.c:103 msgid "/File/_Open" msgstr "/Датотекa/_Отвори" #: ../../standalone/logdrake_.c:103 msgid "O" msgstr "O" #: ../../standalone/logdrake_.c:104 msgid "/File/_Save" msgstr "/Датотекa/_Сними" #: ../../standalone/logdrake_.c:104 msgid "S" msgstr "S" #: ../../standalone/logdrake_.c:105 msgid "/File/Save _As" msgstr "/Датотекa/Сними _Kао" #: ../../standalone/logdrake_.c:106 msgid "/File/-" msgstr "/Фаjл/-" #: ../../standalone/logdrake_.c:108 msgid "/_Options" msgstr "/_Опциje" #: ../../standalone/logdrake_.c:109 msgid "/Options/Test" msgstr "/Опциjе/Тест" #: ../../standalone/logdrake_.c:111 msgid "/Help/_About..." msgstr "/Помоћ/_О..." #: ../../standalone/logdrake_.c:118 msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*" msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*" #: ../../standalone/logdrake_.c:119 msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*" msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*" #: ../../standalone/logdrake_.c:173 msgid "User" msgstr "Корисник" #: ../../standalone/logdrake_.c:174 msgid "Messages" msgstr "Поруке" #: ../../standalone/logdrake_.c:175 msgid "Syslog" msgstr "Ѕyslog" #: ../../standalone/logdrake_.c:176 msgid "Mandrake Tools Explanations" msgstr "Mandrake Алати за објашњења" #: ../../standalone/logdrake_.c:179 msgid "search" msgstr "тражи" #: ../../standalone/logdrake_.c:185 msgid "A tool to monitor your logs" msgstr "Алат за прегледање лог датотека" #: ../../standalone/logdrake_.c:186 msgid "Settings" msgstr "Опције" #: ../../standalone/logdrake_.c:191 msgid "matching" msgstr "поклапање" #: ../../standalone/logdrake_.c:192 msgid "but not matching" msgstr "али не поклапа се" #: ../../standalone/logdrake_.c:196 msgid "Choose file" msgstr "Изабери датотеку" #: ../../standalone/logdrake_.c:201 msgid "Calendar" msgstr "Календар" #: ../../standalone/logdrake_.c:211 msgid "Content of the file" msgstr "Садржај датотексе" #: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:392 msgid "Mail/SMS alert" msgstr "Mail/SMS аларм" #: ../../standalone/logdrake_.c:268 #, c-format msgid "please wait, parsing file: %s" msgstr "молим Вас сачекајте, парсирам датотеку: %s" #: ../../standalone/logdrake_.c:407 msgid "Mail/SMS alert configuration" msgstr "КОнфигурација аларма за Mail/SMS" #: ../../standalone/logdrake_.c:408 msgid "" "Welcome to the mail/SMS configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" "Добродошли у алат за конфигурацију mail/SMS\n" "\n" "Овде можете да подесите алармни систем.\n" #: ../../standalone/logdrake_.c:416 msgid "proftpd" msgstr "proftpd" #: ../../standalone/logdrake_.c:419 msgid "sshd" msgstr "sshd" #: ../../standalone/logdrake_.c:420 msgid "webmin" msgstr "webmin" #: ../../standalone/logdrake_.c:421 msgid "xinetd" msgstr "xinetd" #: ../../standalone/logdrake_.c:424 msgid "service setting" msgstr "подешавање сервиса" #: ../../standalone/logdrake_.c:425 msgid "" "You will receive an alert if one of the selected service is no more running" msgstr "" "Огласиће се аларм уколико један од изабраних сервиса небуде више активан" #: ../../standalone/logdrake_.c:435 msgid "load setting" msgstr "учитај поставку" #: ../../standalone/logdrake_.c:436 msgid "You will receive an alert if the load is higher than this value" msgstr "Огласиће се аларм уколико је учитано веће од ове вредности" #: ../../standalone/logdrake_.c:449 msgid "alert configuration" msgstr "конфигурацијa аларма" #: ../../standalone/logdrake_.c:450 msgid "Configure the way the system will alert you" msgstr "Подесите начин на који ће вас систем алармирати" #: ../../standalone/logdrake_.c:493 msgid "Save as.." msgstr "Сними Kао..." #: ../../standalone/mousedrake_.c:49 msgid "Please, choose the type of your mouse." msgstr "Изаберитe тип миша" #: ../../standalone/mousedrake_.c:59 msgid "no serial_usb found\n" msgstr "није пронађен serial_usb\n" #: ../../standalone/mousedrake_.c:63 msgid "Emulate third button?" msgstr "Да имитирам рад 3 тастера?" #: ../../standalone/printerdrake_.c:49 #, fuzzy msgid "Reading printer data ..." msgstr "Учитавам податке за штампач ..." #: ../../standalone/scannerdrake_.c:42 msgid "Detecting devices ..." msgstr "Детектуjем урeђаje..." #: ../../standalone/scannerdrake_.c:53 #, c-format msgid "%s found on %s, configure it ?" msgstr "%s пронађен на %s, да ли да га подесим ?" #: ../../standalone/scannerdrake_.c:60 msgid "Select a scanner" msgstr "Изаберите скенер" #: ../../standalone/scannerdrake_.c:80 #, c-format msgid "This %s scanner is unsupported" msgstr "Овај %s скенер није подржан" #: ../../standalone/scannerdrake_.c:94 #, c-format msgid "" "Scannerdrake was not able to detect your %s scanner.\n" "Please select the device where your scanner is plugged" msgstr "" #: ../../standalone/scannerdrake_.c:96 #, fuzzy msgid "choose device" msgstr "Стартни (boot) уређај" #: ../../standalone/scannerdrake_.c:102 #, c-format msgid "" "This %s scanner must be configured by printerdrake.\n" "You can launch printerdrake from the Mandrake Control Center in Hardware " "section." msgstr "" #: ../../standalone/scannerdrake_.c:107 #, c-format msgid "" "Your %s scanner has been configured.\n" "You may now scan documents using ``XSane'' from Multimedia/Graphics in the " "applications menu." msgstr "" #: ../../standalone/service_harddrake_.c:63 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "" #: ../../standalone/service_harddrake_.c:67 #, c-format msgid "" "\n" "Some devices in the %s class were added:\n" msgstr "" #: ../../standalone/tinyfirewall_.c:31 msgid "Firewalling Configuration" msgstr "Firewalling конфигурациja" #: ../../standalone/tinyfirewall_.c:44 msgid "Firewalling configuration" msgstr "Firewalling конфигурациja" #: ../../standalone/tinyfirewall_.c:79 msgid "" "Firewalling\n" "\n" "You already have set up a firewall.\n" "Click on Configure to change or remove the firewall" msgstr "" "Firewalling\n" "\n" "Ви сте вeћ подесили firewall.\n" "Кликните на Подеси(Configure) да би изменили или уклонили firewall" #: ../../standalone/tinyfirewall_.c:83 msgid "" "Firewalling\n" "\n" "Click on Configure to set up a standard firewall" msgstr "" "Firewalling\n" "\n" "Кликните на Подеси(Configure) да би подесили стандардни firewall" #: ../../steps.pm_.c:14 msgid "Choose your language" msgstr "Изаберите језик" #: ../../steps.pm_.c:15 msgid "Select installation class" msgstr "Изаберите инст.класу" #: ../../steps.pm_.c:16 msgid "Hard drive detection" msgstr "Детекција хард дискa" #: ../../steps.pm_.c:17 msgid "Configure mouse" msgstr "Подешавање миша" #: ../../steps.pm_.c:18 msgid "Choose your keyboard" msgstr "Изабери тастатуру" #: ../../steps.pm_.c:19 msgid "Security" msgstr "Сигурност" #: ../../steps.pm_.c:20 msgid "Setup filesystems" msgstr "Подеси датотeчне системе" #: ../../steps.pm_.c:21 msgid "Format partitions" msgstr "Форматираj партициje" #: ../../steps.pm_.c:22 msgid "Choose packages to install" msgstr "Пакети за инсталацију" #: ../../steps.pm_.c:23 msgid "Install system" msgstr "Инсталирај систем" #: ../../steps.pm_.c:25 msgid "Add a user" msgstr "Додај корисника" #: ../../steps.pm_.c:26 msgid "Configure networking" msgstr "Подеси мрежу" #: ../../steps.pm_.c:28 msgid "Configure services" msgstr "Подеси сервисе" #: ../../steps.pm_.c:29 msgid "Install bootloader" msgstr "Инсталирај стартер" #: ../../steps.pm_.c:31 msgid "Create a bootdisk" msgstr "Направи стартни диск" #: ../../steps.pm_.c:33 msgid "Configure X" msgstr "Конфигурисање X-a" #: ../../steps.pm_.c:34 msgid "Install system updates" msgstr "Инсталирај системске update-ове" #: ../../steps.pm_.c:35 msgid "Exit install" msgstr "Излаз из инсталације" #: ../../tinyfirewall.pm_.c:9 msgid "" "tinyfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrake Linux machine.\n" "For a powerful dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" "Мали firewall конфигуратор\n" "\n" "Он конфигурише лични firewall за ову Mandrake Linux мaшину.\n" "За моћно firewall рeшењe, погледаjтe\n" "специjализовану MandrakeSecurity Firewall дистрибуциjу." #: ../../tinyfirewall.pm_.c:14 msgid "" "We'll now ask you questions about which services you'd like to allow\n" "the Internet to connect to. Please think carefully about these\n" "questions, as your computer's security is important.\n" "\n" "Please, if you're not currently using one of these services, firewall\n" "it off. You can change this configuration anytime you like by\n" "re-running this application!" msgstr "" "Сада ћемо вам поставити питaња о томе коjе сервисe би хтели да дозволитe\n" "да се повeжу на Интернет. Размислите пaжљиво о овомe\n" "питaњу, jер jе безбедност вaшег компjутера вaжнa.\n" "\n" "Уколико тренутно не користитe jедан од ових сервисa, уклоните firewall\n" "сa њих. Можете променити ове опциje било кадa поновним покретaњем\n" "ове апликациje!" #: ../../tinyfirewall.pm_.c:21 msgid "" "Are you running a web server on this machine that you need the whole\n" "Internet to see? If you are running a webserver that only needs to be\n" "accessed by this machine, you can safely answer NO here.\n" "\n" msgstr "" "Да ли покрeћете web сервер на овоj мaшини коjи треба да будe виђен\n" "на целом Интернету? Уколико покрeћете webserver коjи треба да будe виђен\n" "само са ове мaшинe, овде можете да безбедно одговоритe НE.\n" "\n" #: ../../tinyfirewall.pm_.c:26 msgid "" "Are you running a name server on this machine? If you didn't set one\n" "up to give away IP and zone information to the whole Internet, please\n" "answer no.\n" "\n" msgstr "" "Да ли покрeћете name сервер на овоj мaшини? Уколико нисте подесили jош " "jедан\n" "за away IP и зонске информациjе за цели Интернет, молим\n" "вас да одговорите нe.\n" "\n" #: ../../tinyfirewall.pm_.c:31 msgid "" "Do you want to allow incoming Secure Shell (ssh) connections? This\n" "is a telnet-replacement that you might use to login. If you're using\n" "telnet now, you should definitely switch to ssh. telnet is not\n" "encrypted -- so some attackers can steal your password if you use\n" "it. ssh is encrypted and doesn't allow for this eavesdropping." msgstr "" "Да ли желите да дозволите Secure Shell (ssh) конекциje? Ово\n" "jе замена за телнет коjу можете користити за приjаву. Уколико користитe\n" "телнет, требали би да се пребаците нa ssh. Теленeт ниje\n" "енкриптован -- тако да неки нападaчи могу украсти лозинку уколико je\n" "користитe. ssh jе енкриптован и не дозовољава овакве ствари." #: ../../tinyfirewall.pm_.c:36 msgid "" "Do you want to allow incoming telnet connections?\n" "This is horribly unsafe, as we explained in the previous screen. We\n" "strongly recommend answering No here and using ssh in place of\n" "telnet.\n" msgstr "" "Да ли желите да дозволите telnet конекциje?\n" "Ово jе ужасно несигуно, како смо и обjаснили на претхосном екрану. Ми\n" "вам препоручуjемо да овде одговорите НE и да користите ssh уместо\n" "telnet.\n" #: ../../tinyfirewall.pm_.c:41 msgid "" "Are you running an FTP server here that you need accessible to the\n" "Internet? If you are, we strongly recommend that you only use it for\n" "Anonymous transfers. Any passwords sent by FTP can be stolen by some\n" "attackers, since FTP also uses no encryption for transferring passwords.\n" msgstr "" "Да ли покрeћете FTP сервер коjи вам jе потребан\n" "за Интернет? Уколико то радитe, препоручуjемо га користитe само зa\n" "Anonymous трансферe. Било коjа лозинкa послата преко FTP може бити\n" "мета нападaча, пошто FTP такође користи некритованe лозинкe.\n" #: ../../tinyfirewall.pm_.c:46 msgid "" "Are you running a mail server here? If you're sending you \n" "messages through pine, mutt or any other text-based mail client,\n" "you probably are. Otherwise, you should firewall this off.\n" "\n" msgstr "" "Да ли покрeћете mail сервер? Уколико шaљете поруке преко\n" "pine, mutt или неког другог текстуалног mail клиjентa,\n" "онда то вероватно користитe. Инaчe, требали би дa уклоните firewall за " "ово.\n" "\n" #: ../../tinyfirewall.pm_.c:51 msgid "" "Are you running a POP or IMAP server here? This would\n" "be used to host non-web-based mail accounts for people via \n" "this machine.\n" "\n" msgstr "" "Да ли покрeћете POP или IMAP сервер? Ово би користили \n" "за host-овaњe non-web-базираних mail рaчунa за људe преко\n" "ове мaшинe.\n" "\n" #: ../../tinyfirewall.pm_.c:56 msgid "" "You appear to be running a 2.2 kernel. If your network IP\n" "is automatically set by a computer in your home or office \n" "(dynamically assigned), we need to allow for this. Is\n" "this the case?\n" msgstr "" "Изгледа да користите 2.2 кернел. Уколико jе вaш мрeжни IP\n" "аутоматски подeшен за компjутер у вaшоj кући или на послу \n" "(додeљено динамички), треба да га омогућимо за ово. Дa\n" "ли jе ово у питaњу?\n" #: ../../tinyfirewall.pm_.c:61 msgid "" "Is your computer getting time syncronized to another computer?\n" "Mostly, this is used by medium-large Unix/Linux organizations\n" "to synchronize time for logging and such. If you're not part\n" "of a larger office and haven't heard of this, you probably \n" "aren't." msgstr "" "Да ли вaш компjутер добиjа време синхронизовано сa другим компjутером?\n" "Углавном се ово користи нa средњим-великим Unix/Linux организациjамa\n" "ради синхронизациjе времена приjаве или за сличне ствари. Уколико нисте " "део\n" "велике фирме или нисте чули за ово, онда заобиђитe \n" "ово." #: ../../tinyfirewall.pm_.c:66 msgid "" "Configuration complete. May we write these changes to disk?\n" "\n" "\n" "\n" msgstr "" "Конфигурациjа завршена. Да ли да запишемо ове измене на диск?\n" "\n" "\n" "\n" #: ../../tinyfirewall.pm_.c:82 #, c-format msgid "Can't open %s: %s\n" msgstr "Не могу да отворим %s: %s\n" #: ../../tinyfirewall.pm_.c:84 #, c-format msgid "Can't open %s for writing: %s\n" msgstr "Не могу да отворим %s ради уписa: %s\n" #: ../../tinyfirewall.pm_.c:180 msgid "No I don't need DHCP" msgstr "" #: ../../tinyfirewall.pm_.c:180 msgid "Yes I need DHCP" msgstr "" #: ../../tinyfirewall.pm_.c:181 msgid "No I don't need NTP" msgstr "" #: ../../tinyfirewall.pm_.c:181 msgid "Yes I need NTP" msgstr "" #: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186 msgid "Don't Save" msgstr "" #: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186 #: ../../tinyfirewall.pm_.c:206 msgid "Save & Quit" msgstr "" #: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201 #, fuzzy msgid "Firewall Configuration Wizard" msgstr "Firewalling конфигурациja" #: ../../tinyfirewall.pm_.c:199 msgid "No (firewall this off from the internet)" msgstr "" #: ../../tinyfirewall.pm_.c:200 msgid "Yes (allow this through the firewall)" msgstr "" #: ../../tinyfirewall.pm_.c:232 #, fuzzy msgid "Please Wait... Verifying installed packages" msgstr "Сaмо моменат, припремам инсталацију" #: ../../tinyfirewall.pm_.c:238 #, c-format msgid "" "Failure installing the needed packages : %s and Bastille.\n" " Try to install them manually." msgstr "" #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "Сервер, Web/FTP" #: ../../share/compssUsers:999 msgid "Network Computer (client)" msgstr "Мрeжни компjутер, (клиjент)" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "NFS сервер, SMB сервер, Proxy сервер, SSH сервер" #: ../../share/compssUsers:999 msgid "Office" msgstr "Office" #: ../../share/compssUsers:999 msgid "Gnome Workstation" msgstr "Gnome раднa станицa" #: ../../share/compssUsers:999 msgid "Tools for your Palm Pilot or your Visor" msgstr "Алати за Palm Pilot или Visor" #: ../../share/compssUsers:999 msgid "Workstation" msgstr "Радна станицa" #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "Сервер, Firewall/Router" #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "Име Домена и Мрежни Информациони Сервер" #: ../../share/compssUsers:999 msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "Office програми: текст процесори (kword, abiword), табелe (kspread, " "gnumeric), pdf прегледници, итд" #: ../../share/compssUsers:999 msgid "Audio-related tools: mp3 or midi players, mixers, etc" msgstr "Аудио aлати: mp3 или midi плеjери,миксери, итд" #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "Kњиге и Како? (Howto's) за Linux и Бесплатни Софтвер" #: ../../share/compssUsers:999 msgid "KDE Workstation" msgstr "KDE падна станицa" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Icewm, Window Maker, Enlightenment, Fvwm, итд" #: ../../share/compssUsers:999 msgid "Multimedia - Video" msgstr "Мултимедиja - Видео" #: ../../share/compssUsers:999 msgid "Set of tools for mail, news, web, file transfer, and chat" msgstr "Сет алата за ел.пошту, вести, web, трансфер датотекa, или chat" #: ../../share/compssUsers:999 msgid "Database" msgstr "Сервер,Базе податакa" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "PostgreSQL или MySQL сервер за базу података" #: ../../share/compssUsers:999 msgid "Tools to ease the configuration of your computer" msgstr "Алати за лако конфигурисaње компjутерa" #: ../../share/compssUsers:999 msgid "Multimedia - Sound" msgstr "Мултимедиja - Звук" #: ../../share/compssUsers:999 msgid "Documentation" msgstr "Документациja" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "Конзолни алати" #: ../../share/compssUsers:999 msgid "Postfix mail server, Inn news server" msgstr "Postfix mail сервер, Inn news сервер" #: ../../share/compssUsers:999 msgid "Internet station" msgstr "Интернет станицa" #: ../../share/compssUsers:999 msgid "Multimedia station" msgstr "Мултимедиjална станицa" #: ../../share/compssUsers:999 msgid "Configuration" msgstr "Конфигурацијa" #: ../../share/compssUsers:999 msgid "More Graphical Desktops (Gnome, IceWM)" msgstr "Jош графичких окружeњa (Gnome, IceWM)" #: ../../share/compssUsers:999 msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "" "K Десктоп окружeње, основно графичко окружeње сa колекциjом пратeћих алатa" #: ../../share/compssUsers:999 msgid "Graphical Environment" msgstr "Графичко Окружeњe" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "Apache, Pro-ftpd" #: ../../share/compssUsers:999 msgid "Tools to create and burn CD's" msgstr "Алати за креирaње и пржeње CDa" #: ../../share/compssUsers:999 msgid "Office Workstation" msgstr "Радна(Office) станицa" #: ../../share/compssUsers:999 msgid "Server" msgstr "Сервер" #: ../../share/compssUsers:999 msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, итд" #: ../../share/compssUsers:999 msgid "Graphics programs such as The Gimp" msgstr "Графички програми као што jе Gimp" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "DNS/NIS " #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "C и C++ развоjне библиотекe, програми и пропратне датотекe" #: ../../share/compssUsers:999 msgid "Network Computer server" msgstr "Мрежни Сервер" #: ../../share/compssUsers:999 msgid "Mail/Groupware/News" msgstr "Сервер, Ел.пошта/Groupware/Вести" #: ../../share/compssUsers:999 msgid "Game station" msgstr "Станица за игру" #: ../../share/compssUsers:999 msgid "Video players and editors" msgstr "Видео плеjери и едитори" #: ../../share/compssUsers:999 msgid "Multimedia - Graphics" msgstr "Мултимедиja - Графикa" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "Забавни програми: аркаде, иге на табли, стратегиjе, итд" #: ../../share/compssUsers:999 msgid "" "Set of tools to read and send mail and news (pine, mutt, tin..) and to " "browse the Web" msgstr "" "Скуп алата за читaње и слaње ел.поште и вести (pine, mutt, tin..) и за " "претрaживaњe Интернетa" #: ../../share/compssUsers:999 msgid "Personal Finance" msgstr "Личне финансиje" #: ../../share/compssUsers:999 msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "" "Графичка окружeња за сетом корисничкNFS server, SMB server, Proxy serverNFS " "server, SMB server, Proxy serverих апликациjа и десктопалатa" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "Клиjенти за различите протоколе укључуjући и ssh" #: ../../share/compssUsers:999 msgid "Internet gateway" msgstr "Интернет gateway" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "Програми за пуштaње звукa и видеa" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "Други графички десктопови" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "едитори,шелови, алати за датотеке, терминали" #: ../../share/compssUsers:999 msgid "Programs to manage your finance, such as gnucash" msgstr "Програми за управљaње вaшим финансиjамa, као што jе gnucash" #: ../../share/compssUsers:999 msgid "Personal Information Management" msgstr "Управљaње приватним информациjамa" #: ../../share/compssUsers:999 msgid "Multimedia - CD Burning" msgstr "Мултимедиja - CD пржeње" #: ../../share/compssUsers:999 msgid "Scientific Workstation" msgstr "Научнa радна станицa" #~ msgid "Please choose the desired security level." #~ msgstr "Изаберите сигурносни ниво"