# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR Free Software Foundation, Inc. # Gregor Pirnaver , 2002 # msgid "" msgstr "" "Project-Id-Version: DrakX\n" "POT-Creation-Date: 2003-03-07 03:05+0100\n" "PO-Revision-Date: 2002-01-21 11:03GMT\n" "Last-Translator: Gregor Pirnaver \n" "Language-Team: Slovenščina \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=iso-8859-2\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 0.9.5\n" #: ../../any.pm:1 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" #: ../../any.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../interactive.pm:1 #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 #: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1 #: ../../standalone/drakbackup:1 ../../standalone/drakboot:1 #: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 #: ../../standalone/drakfont:1 ../../standalone/drakgw:1 #: ../../standalone/draksec:1 ../../standalone/logdrake:1 #: ../../standalone/net_monitor:1 #, c-format msgid "Cancel" msgstr "Prekliči" #: ../../any.pm:1 #, c-format msgid "Launch userdrake" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, c-format msgid "Mandatory package %s is missing" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, fuzzy, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "Izberite pakete, ki jih želite namestiti" #: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, fuzzy, c-format msgid "Custom" msgstr "Prilagojeno" #: ../../any.pm:1 #, fuzzy, c-format msgid "Allow all users" msgstr "Dodaj uporabnika" #: ../../any.pm:1 #, fuzzy, c-format msgid "No sharing" msgstr "Zaganjam X" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "More" msgstr "Premakni" #: ../../any.pm:1 #, c-format msgid "Here is the full list of available countries" msgstr "" #: ../../any.pm:1 #, fuzzy, c-format msgid "Please choose your country." msgstr "Ali želite sedaj zagnati ,X -probeonly`?" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Country" msgstr "Država:" #: ../../any.pm:1 #, fuzzy, c-format msgid "All languages" msgstr "Izberite jezik" #: ../../any.pm:1 #, c-format msgid "Use Unicode by default" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Mandrake Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" #: ../../any.pm:1 #, fuzzy, c-format msgid "Please choose a language to use." msgstr "Ali želite sedaj zagnati ,X -probeonly`?" #: ../../any.pm:1 #, c-format msgid "Choose the window manager to run:" msgstr "Izberite okenskega upravitelja, ki naj bo pognan:" #: ../../any.pm:1 #, c-format msgid "Choose the default user:" msgstr "Izberite privzetega uporabnika:" #: ../../any.pm:1 #, fuzzy, c-format msgid "Do you want to use this feature?" msgstr "Ali želite zdaj zagnati ,X -probeonly`?" #: ../../any.pm:1 #, fuzzy, c-format msgid "I can set up your computer to automatically log on one user." msgstr "" "Računalnik lahko samodejno, po zagonu, v sistem prijavi uporabnika.\n" "Če tega ne želite, pritisnite gumb prekliči." #: ../../any.pm:1 #, c-format msgid "Autologin" msgstr "Samodejna prijava" #: ../../any.pm:1 #, c-format msgid "Icon" msgstr "Ikona" #: ../../any.pm:1 #, c-format msgid "Shell" msgstr "Lupina" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Password (again)" msgstr "Geslo (ponovno)" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakconnect:1 #, c-format msgid "Password" msgstr "Geslo" #: ../../any.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "User name" msgstr "Uporabniško ime" #: ../../any.pm:1 #, c-format msgid "Real name" msgstr "Pravo ime" #: ../../any.pm:1 #, c-format msgid "Accept user" msgstr "Sprejmi uporabnika" #: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1 #, c-format msgid "Done" msgstr "Končano" #: ../../any.pm:1 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Vnesite uporabnika\n" "%s" #: ../../any.pm:1 #, c-format msgid "Add user" msgstr "Dodaj uporabnika" #: ../../any.pm:1 #, c-format msgid "This user name has already been added" msgstr "To uporabniško ime je že dodano" #: ../../any.pm:1 #, fuzzy, c-format msgid "The user name is too long" msgstr "To uporabniško ime je že dodano" #: ../../any.pm:1 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "Uporabniško ime mora vsebovati samo male črke, številke, `-' in `_'" #: ../../any.pm:1 #, c-format msgid "Please give a user name" msgstr "Vnesite uporabniško ime" #: ../../any.pm:1 #, c-format msgid "This password is too simple" msgstr "Geslo je preveč preprosto" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Please try again" msgstr "Poskusite ponovno" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "The passwords do not match" msgstr "Gesla se ne ujemata" #: ../../any.pm:1 #, c-format msgid "(already added %s)" msgstr "(že dodano %s)" #: ../../any.pm:1 #, c-format msgid "access to compilation tools" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to network tools" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to administrative files" msgstr "" #: ../../any.pm:1 #, c-format msgid "allow \"su\"" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to rpm tools" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to X programs" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "Tukaj so različni vnosi.\n" "Lahko dodate še kakšnega ali spremenite obstoječega" #: ../../any.pm:1 #, c-format msgid "Other OS (windows...)" msgstr "Ostali OS (Okna...)" #: ../../any.pm:1 #, c-format msgid "Other OS (MacOS...)" msgstr "Ostali OS (MacOS...)" #: ../../any.pm:1 #, c-format msgid "Other OS (SunOS...)" msgstr "Ostali OS (SunOS...)" #: ../../any.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Linux" msgstr "Linux" #: ../../any.pm:1 #, c-format msgid "Which type of entry do you want to add?" msgstr "Kakšen tip vnosa želite dodati?" #: ../../any.pm:1 #, c-format msgid "This label is already used" msgstr "Ta labela je že uporabljena" #: ../../any.pm:1 #, fuzzy, c-format msgid "You must specify a root partition" msgstr "Potrebujete razdelek swap" #: ../../any.pm:1 #, c-format msgid "You must specify a kernel image" msgstr "" #: ../../any.pm:1 #, c-format msgid "Empty label not allowed" msgstr "Prazna labela ni dovoljena" #: ../../any.pm:1 ../../harddrake/v4l.pm:1 #, c-format msgid "Default" msgstr "Privzeto" #: ../../any.pm:1 #, c-format msgid "NoVideo" msgstr "" #: ../../any.pm:1 #, fuzzy, c-format msgid "Initrd-size" msgstr "Initrd" #: ../../any.pm:1 #, c-format msgid "Append" msgstr "Pripni" #: ../../any.pm:1 #, c-format msgid "Label" msgstr "Labela" #: ../../any.pm:1 #, c-format msgid "Unsafe" msgstr "Tvegano" #: ../../any.pm:1 #, c-format msgid "Table" msgstr "Tabela" #: ../../any.pm:1 #, c-format msgid "Root" msgstr "Korenski" #: ../../any.pm:1 #, c-format msgid "Read-write" msgstr "Branje-pisanje" #: ../../any.pm:1 #, c-format msgid "Initrd" msgstr "Initrd" #: ../../any.pm:1 #, c-format msgid "Video mode" msgstr "Grafični način" #: ../../any.pm:1 #, c-format msgid "Image" msgstr "Slika" #: ../../any.pm:1 #, fuzzy, c-format msgid "Default OS?" msgstr "Privzeto" #: ../../any.pm:1 #, c-format msgid "Enable OF Boot?" msgstr "" #: ../../any.pm:1 #, c-format msgid "Enable CD Boot?" msgstr "" #: ../../any.pm:1 #, c-format msgid "Kernel Boot Timeout" msgstr "" #: ../../any.pm:1 #, c-format msgid "Open Firmware Delay" msgstr "" #: ../../any.pm:1 #, c-format msgid "Boot device" msgstr "Zagonska naprava" #: ../../any.pm:1 #, c-format msgid "Init Message" msgstr "" #: ../../any.pm:1 #, fuzzy, c-format msgid "Bootloader to use" msgstr "Glavne možnosti zagonskega nalagalnika" #: ../../any.pm:1 #, c-format msgid "Bootloader main options" msgstr "Glavne možnosti zagonskega nalagalnika" #: ../../any.pm:1 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "Možnost ``Omejitev možnosti ukazne vrstice'' ni uporabna brez gesla" #: ../../any.pm:1 #, c-format msgid "Give the ram size in MB" msgstr "Podajte velikost pomnilnika v MB" #: ../../any.pm:1 #, c-format msgid "Enable multiple profiles" msgstr "Omogoči več profilov" #: ../../any.pm:1 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Natanšna velikost pomnilnika RAM, če je potrebno (najdenih %d MB)" #: ../../any.pm:1 #, c-format msgid "Clean /tmp at each boot" msgstr "Pri zagonu počisti /tmp" #: ../../any.pm:1 #, c-format msgid "Create a bootdisk" msgstr "Ustvarjanje zagonske diskete" #: ../../any.pm:1 #, c-format msgid "restrict" msgstr "omeji" #: ../../any.pm:1 #, c-format msgid "Restrict command line options" msgstr "Omejitev možnosti ukazne vrstice" #: ../../any.pm:1 #, c-format msgid "Force No APIC" msgstr "" #: ../../any.pm:1 #, c-format msgid "Enable ACPI" msgstr "" #: ../../any.pm:1 #, c-format msgid "Delay before booting default image" msgstr "Pavza pred zaganjanjem privzete slike" #: ../../any.pm:1 #, c-format msgid "compact" msgstr "kompaktno" #: ../../any.pm:1 #, c-format msgid "Compact" msgstr "Kompaktno" #: ../../any.pm:1 #, c-format msgid "Bootloader installation" msgstr "Namestitev zagonskega nalagalnika" #: ../../any.pm:1 #, c-format msgid "First sector of boot partition" msgstr "Prvi sektor zagonskega razdelka" #: ../../any.pm:1 #, c-format msgid "First sector of drive (MBR)" msgstr "Prvi sektor pogona (MBR)" #: ../../any.pm:1 #, c-format msgid "Where do you want to install the bootloader?" msgstr "Kam želite namestiti zagonski nalagalnik?" #: ../../any.pm:1 #, c-format msgid "LILO/grub Installation" msgstr "Namestitev LILO/grub" #: ../../any.pm:1 #, c-format msgid "SILO Installation" msgstr "Namestitev SILO" #: ../../any.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Skip" msgstr "Preskok" #: ../../any.pm:1 #, fuzzy, c-format msgid "On Floppy" msgstr "Shrani na disketo" #: ../../any.pm:1 #, fuzzy, c-format msgid "First sector of the root partition" msgstr "Prvi sektor zagonskega razdelka" #: ../../any.pm:1 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" #: ../../any.pm:1 #, c-format msgid "Creating bootdisk..." msgstr "" #: ../../any.pm:1 #, fuzzy, c-format msgid "Insert a floppy in %s" msgstr "Izberite strežnik" #: ../../any.pm:1 #, fuzzy, c-format msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "Ali želite zdaj zagnati ,X -probeonly`?" #: ../../any.pm:1 #, fuzzy, c-format msgid "Second floppy drive" msgstr "Izberite strežnik" #: ../../any.pm:1 #, fuzzy, c-format msgid "First floppy drive" msgstr "Izberite strežnik" #: ../../any.pm:1 #, fuzzy, c-format msgid "Sorry, no floppy drive available" msgstr "Izberite strežnik" #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?\n" "%s" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "\n" "\n" "(WARNING! You're using XFS for your root partition,\n" "creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" "because XFS needs a very large driver)." msgstr "" #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" #: ../../bootloader.pm:1 #, fuzzy, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "Kam želite namestiti zagonski nalagalnik?" #: ../../bootloader.pm:1 #, c-format msgid "not enough room in /boot" msgstr "premalo prostora v /boot" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "Izbran vnos bo zagnan samodejno cez %d sekund." #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "commands before booting, or 'c' for a command-line." msgstr "ukazov pred zagonom ali 'c' za ukazno vrstico." #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "Pritisnite enter za zagon izbranega OS, 'e' za urejevanje" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "Uporabite tipke %c in %c za izbiro vnosa" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Welcome to GRUB the operating system chooser!" msgstr "Pozdravljeni v izbiralcu operacijskega sistema GRUB!" #: ../../bootloader.pm:1 #, fuzzy, c-format msgid "Yaboot" msgstr "Korenski" #: ../../bootloader.pm:1 #, c-format msgid "Grub" msgstr "" #: ../../bootloader.pm:1 #, c-format msgid "LILO with text menu" msgstr "" #: ../../bootloader.pm:1 #, c-format msgid "LILO with graphical menu" msgstr "" #: ../../bootloader.pm:1 #, c-format msgid "SILO" msgstr "" # NOTE: this message will be displayed at boot time; that is # only the ascii charset will be available on most machines # so use only 7bit for this message (and do transliteration or # leave it in English, as it is the best for your language) # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm:1 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" "Pozdravljeni v izbiralcu operacijskega sistema %s!\n" "\n" "Izberite operacijski sistem iz zgornjega seznama ali\n" "pocakajte %d sekund za prevzet zagon.\n" "\n" #: ../../common.pm:1 #, c-format msgid "consolehelper missing" msgstr "" #: ../../common.pm:1 #, c-format msgid "kdesu missing" msgstr "" #: ../../common.pm:1 #, c-format msgid "Screenshots will be available after install in %s" msgstr "" #: ../../common.pm:1 #, fuzzy, c-format msgid "Can't make screenshots before partitioning" msgstr "Razdelkov ni več mogoče dodati" #: ../../common.pm:1 #, c-format msgid "%d seconds" msgstr "%d sekund" #: ../../common.pm:1 #, c-format msgid "1 minute" msgstr "1 minuta" #: ../../common.pm:1 #, c-format msgid "%d minutes" msgstr "%d minut" #: ../../common.pm:1 #, c-format msgid "TB" msgstr "TB" #: ../../common.pm:1 #, c-format msgid "GB" msgstr "GB" #: ../../common.pm:1 #, c-format msgid "MB" msgstr "MB" #: ../../common.pm:1 #, c-format msgid "KB" msgstr "KB" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "United States" msgstr "Združene države Amerike" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Austria" msgstr "Avstrija" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #: ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "Italy" msgstr "Namestiti" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "Netherlands" msgstr "Nizozemska" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Sweden" msgstr "Švedska" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Norway" msgstr "Norveška" #: ../../crypto.pm:1 ../../lang.pm:1 #, fuzzy, c-format msgid "Greece" msgstr "Splošno" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Germany" msgstr "Nemčija" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Czech Republic" msgstr "Češka" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "Belgium" msgstr "Belgija" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, fuzzy, c-format msgid "France" msgstr "Prekliči" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Costa Rica" msgstr "Kosta Rika" #: ../../fsedit.pm:1 #, c-format msgid "Error opening %s for writing: %s" msgstr "Napaka pri odpiranju %s za pisanje: %s" #: ../../fsedit.pm:1 #, c-format msgid "Nothing to do" msgstr "" #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "Not enough free space for auto-allocating" msgstr "Premalo razpoložljivega prostora za nov razdelek" #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr "" "Za to točko priklopa potrebujete pravi datotečni sistem(ext2, reiserfs)\n" #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "Za to točko priklopa potrebujete pravi datotečni sistem(ext2, reiserfs)\n" #: ../../fsedit.pm:1 #, c-format msgid "This directory should remain within the root filesystem" msgstr "Da imenik bi naj ostal na korenskem datotečnem sistemu" #: ../../fsedit.pm:1 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "" #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "Za korenski (/) razdelek ste izbrali programski RAID razdelek.\n" "Nobeden zagonski nalagalnik ne bo deloval brez /boot razdelka.\n" "Ne pozabite dodati /boot razdelka" #: ../../fsedit.pm:1 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "Razdelek s točko priklopa %s že obstaja\n" #: ../../fsedit.pm:1 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "Mount points must begin with a leading /" msgstr "Točke priklopa se morajo začeti z /" #: ../../fsedit.pm:1 #, c-format msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "ReiserFS ne morete uporabiti na razdelkih manjših od 32MB" #: ../../fsedit.pm:1 #, c-format msgid "You can't use JFS for partitions smaller than 16MB" msgstr "JFS ne morete uporabiti na razdelkih manjših od 16MB" #: ../../fsedit.pm:1 #, c-format msgid "" "I can't read the partition table of device %s, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to loose all the partitions?\n" msgstr "" #: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1 #: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 #: ../../standalone/drakboot:1 ../../standalone/draksplash:1 #, c-format msgid "Error" msgstr "Napaka" #: ../../fsedit.pm:1 #, c-format msgid "server" msgstr "strežnik" #: ../../fsedit.pm:1 #, c-format msgid "with /usr" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "simple" msgstr "preprosto" #: ../../fs.pm:1 #, fuzzy, c-format msgid "Enabling swap partition %s" msgstr "Formatiranje razdelka %s" #: ../../fs.pm:1 ../../partition_table.pm:1 #, c-format msgid "error unmounting %s: %s" msgstr "napaka pri odklopu %s: %s" #: ../../fs.pm:1 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "" #: ../../fs.pm:1 #, fuzzy, c-format msgid "Mounting partition %s" msgstr "Formatiranje razdelka %s" #: ../../fs.pm:1 #, fuzzy, c-format msgid "Checking %s" msgstr "Ločljivost: %s\n" #: ../../fs.pm:1 #, c-format msgid "Formatting partition %s" msgstr "Formatiranje razdelka %s" #: ../../fs.pm:1 #, c-format msgid "Creating and formatting file %s" msgstr "" #: ../../fs.pm:1 #, c-format msgid "I don't know how to format %s in type %s" msgstr "Formatiranje %s s tipom %s ni poznano" #: ../../fs.pm:1 #, c-format msgid "%s formatting of %s failed" msgstr "%s formatiranje %s neuspešno" #: ../../help.pm:1 #, c-format msgid "" "Click on \"Next ->\" if you want to delete all data and partitions present\n" "on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n" "be able to recover any data and partitions present on this hard drive,\n" "including any Windows data.\n" "\n" "Click on \"<- Previous\" to stop this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data present on it will be lost\n" "and will not be recoverable!" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "As a review, DrakX will present a summary of various information it has\n" "about your system. Depending on your installed hardware, you may have some\n" "or all of the following entries. Each entry is made up of the configuration\n" "item to be configured, followed by a quick summary of the current\n" "configuration. Click on the corresponding \"Configure\" button to change\n" "that.\n" "\n" " * \"Keyboard\": check the current keyboard map configuration and change\n" "that if necessary.\n" "\n" " * \"Country\": check the current country selection. If you are not in this\n" "country, click on the \"Configure\" button and choose another one. If your\n" "country is not in the first list shown, click the \"More\" button to get\n" "the complete country list.\n" "\n" " * \"Timezone\": By default, DrakX deduces your time zone based on the\n" "country you have chosen. You can click on the \"Configure\" button here if\n" "this is not correct.\n" "\n" " * \"Mouse\": check the current mouse configuration and click on the button\n" "to change it if necessary.\n" "\n" " * \"Printer\": clicking on the \"Configure\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used during installation.\n" "\n" " * \"Sound card\": if a sound card is detected on your system, it is\n" "displayed here. If you notice the sound card displayed is not the one that\n" "is actually present on your system, you can click on the button and choose\n" "another driver.\n" "\n" " * \"Graphical Interface\": by default, DrakX configures your graphical\n" "interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n" "you, click on \"Configure\" to reconfigure your graphical interface.\n" "\n" " * \"TV card\": if a TV card is detected on your system, it is displayed\n" "here. If you have a TV card and it is not detected, click on \"Configure\"\n" "to try to configure it manually.\n" "\n" " * \"ISDN card\": if an ISDN card is detected on your system, it will be\n" "displayed here. You can click on \"Configure\" to change the parameters\n" "associated with the card.\n" "\n" " * \"Network\": If you want to configure your Internet or local network\n" "access now.\n" "\n" " * \"Security Level\": this entry offers you to redefine the security level\n" "as set in a previous step ().\n" "\n" " * \"Firewall\": if you plan to connect your machine to the Internet, it's\n" "a good idea to protect you from intrusions by setting up a firewall.\n" "Consult the corresponding section of the ``Starter Guide'' for details\n" "about firewall settings.\n" "\n" " * \"Bootloader\": if you wish to change your bootloader configuration,\n" "click that button. This should be reserved to advanced users.\n" "\n" " * \"Services\": you'll be able here to control finely which services will\n" "be run on your machine. If you plan to use this machine as a server it's a\n" "good idea to review this setup." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "\"Sound card\": if a sound card is detected on your system, it is displayed\n" "here. If you notice the sound card displayed is not the one that is\n" "actually present on your system, you can click on the button and choose\n" "another driver." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n" "boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n" "detected and installed in the bootloader menu. If this is not the case, you\n" "can add an entry by hand in this screen. Be careful to choose the correct\n" "parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt.\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information.\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second before your\n" "default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt.\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt.\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "You can add additional entries in yaboot for other operating systems,\n" "alternate kernels, or for an emergency boot image.\n" "\n" "For other OSs, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is the name you will have to type at the yaboot prompt to\n" "select this boot option.\n" "\n" " * Image: this would be the name of the kernel to boot. Typically, vmlinux\n" "or a variation of vmlinux with an extension.\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation.\n" "\n" " * Append: on Apple hardware, the kernel append option is often used to\n" "assist in initializing video hardware, or to enable keyboard mouse button\n" "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n" "The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation.\n" "\n" " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n" "need to allocate a large ramdisk, this option can be used to specify a\n" "ramdisk larger than the default.\n" "\n" " * Read-write: normally the \"root\" partition is initially mounted as\n" "read-only, to allow a file system check before the system becomes ``live''.\n" "You can override the default with this option.\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support.\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by pressing ENTER at the yaboot prompt. This entry will also be\n" "highlighted with a ``*'' if you press [Tab] to see the boot selections." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, You'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" "DrakX bo sedaj poskušal poiskati PCI SCSI krmilnik(e). \n" "Če bo najden kakšen SCSI krmilnik in prepoznan gonilnik zanj, bo gonilnik\n" "samodejno nameščen.\n" "\n" "\n" "Če nimate SCSI krmilnikov ali imate ISA ali PCI SCSI krmilnik, ki ga DrakX\n" "ne prepozna, boste vprašani, če imate v sistemu kakšen SCSI krmilnik. Če v\n" "sistemu nimate SCSI krmilnikov pritisnite \"Ne\". Če boste pritisnili \"Da\" " "se\n" "vam bo odprl seznam gonilnikov, iz katerega lahko izberete krmilnik.\n" "\n" "\n" "Če boste ročno izbrali gonilnik, vas bo DrakX vprašal če želite določiti\n" "nastavitve zanj. Dovolite DrakX-u, da jih poskusi nastaviti samodejno.\n" "\n" "\n" "Če tega ne boste izbrali, boste morali nastavitve vnesti sami. Poglejte v\n" "uporabniški priročnik (poglavje 3, razdelek \"Collective informations on " "your hardware)\n" "za nasvete, kako pridobiti to informacijo iz dokumentacije strojne opreme,\n" "spletne strani proizvajalca (če imate dostop do internet-a) ali Microsoft " "Oken\n" "(če jih imate nameščena)." #: ../../help.pm:1 #, c-format msgid "" "Now, it's time to select a printing system for your computer. Other OSs may\n" "offer you one, but Mandrake Linux offers two. Each of the printing systems\n" "is best for a particular type of configuration.\n" "\n" " * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"pdq\n" "\" will handle only very simple network cases and is somewhat slow when\n" "used with networks.) It's recommended that you use \"pdq\" if this is your\n" "first experience with GNU/Linux.\n" "\n" " * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n" "printing to your local printer or to one halfway around the planet. It is\n" "simple to configure and can act as a server or a client for the ancient\n" "\"lpd \" printing system, so it compatible with older operating systems\n" "that may still need print services. While quite powerful, the basic setup\n" "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n" "sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n" "front-ends for printing or choosing printer options and for managing the\n" "printer.\n" "\n" "If you make a choice now, and later find that you don't like your printing\n" "system you may change it by running PrinterDrake from the Mandrake Control\n" "Center and clicking the expert button." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" "automated. DrakX will analyze the disk boot sector and act according to\n" "what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. This way you will be able to load either GNU/Linux or another\n" "OS.\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "If it cannot make a determination, DrakX will ask you where to place the\n" "bootloader.\n" "\n" "\"Boot device\": in most cases, you will not change the default (\"First\n" "sector of drive (MBR)\"), but if you prefer, the bootloader can be\n" "installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n" "(\"On Floppy\")." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "After you have configured the general bootloader parameters, the list of\n" "boot options that will be available at boot time will be displayed.\n" "\n" "If there are other operating systems installed on your machine they will\n" "automatically be added to the boot menu. You can fine-tune the existing\n" "options by clicking \"Add\" to create a new entry; selecting an entry and\n" "clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n" "your changes.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone who goes to the console and reboots the machine. You can delete the\n" "corresponding entries for the operating systems to remove them from the\n" "bootloader menu, but you will need a boot disk in order to boot those other\n" "operating systems!" msgstr "" "LILO (LInux LOader) in Grub sta zagonska nalagalnika. Omogočata zagon\n" "GNU/Linux-a ali kateregakoli drugega operacijskega sistema na vašem\n" "računalniku. Ponavadi so drugi operacijski sistemi pravilno prepoznani in\n" "nameščeni. V primeru, da ni tako, lahko tukaj ročno dodate vnos. Pazljivo\n" "izberite pravilne parametre." #: ../../help.pm:1 #, c-format msgid "" "This dialog allows to finely tune your bootloader:\n" "\n" " * \"Bootloader to use\": there are three choices for your bootloader:\n" "\n" " * \"GRUB\": if you prefer grub (text menu).\n" "\n" " * \"LILO with text menu\": if you prefer LILO with its text menu\n" "interface.\n" "\n" " * \"LILO with graphical menu\": if you prefer LILO with its graphical\n" "interface.\n" "\n" " * \"Boot device\": in most cases, you will not change the default\n" "(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n" "second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n" "\n" " * \"Delay before booting the default image\": after a boot or a reboot of\n" "the computer, this is the delay given to the user at the console to select\n" "a boot entry other than the default.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" "\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n" "system! Be sure you know what you do before changing any of the options. !!\n" "\n" "Clicking the \"Advanced\" button in this dialog will offer advanced options\n" "that are reserved for the expert user." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you have to enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only one authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That is why you must choose a password that is difficult to\n" "guess - DrakX will tell you if the password that you chose too easy. As you\n" "can see, you are not forced to enter a password, but we strongly advise you\n" "against. GNU/Linux is as prone to operator error as any other operating\n" "system. Since \"root\" can overcome all limitations and unintentionally\n" "erase all data on partitions by carelessly accessing the partitions\n" "themselves, it is important that it be difficult to become \"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it too\n" "easy to compromise a system.\n" "\n" "One caveat -- do not make the password too long or complicated because you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it in. To reduce\n" "the chance of a blind typing error you will need to enter the password\n" "twice. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will have to be used the first time you connect.\n" "\n" "If you wish access to this computer to be controlled by an authentication\n" "server, click the \"Advanced\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one as \"authentication\". If you do not\n" "know which to use, ask your network administrator.\n" "\n" "If you happen to have problems with reminding passwords, you can choose to\n" "have \"No password\", if your computer won't be connected to the Internet,\n" "and if you trust anybody having access to it." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "Izberite pravilna vrata. Npr: COM1 pod Okni so poimenovana ttyS0\n" "pod GNU/Linux-om." #: ../../help.pm:1 #, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be ``pressed'' by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the provided list.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and to\n" "go back to the list of choices.\n" "\n" "Wheel mice are occasionally not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n" "Scroll the mouse wheel to ensure that it is activated correctly. Once you\n" "see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n" "the buttons and check that the mouse pointer moves on-screen as you move\n" "your mouse." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Your choice of preferred language will affect the language of the\n" "documentation, the installer and the system in general. Select first the\n" "region you are located in, and then the language you speak.\n" "\n" "Clicking on the \"Advanced\" button will allow you to select other\n" "languages to be installed on your workstation, thereby installing the\n" "language-specific files for system documentation and applications. For\n" "example, if you will host users from Spain on your machine, select English\n" "as the default language in the tree view and \"Espanol\" in the Advanced\n" "section.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several ones, or even install them all by selecting the \"All\n" "languages\" box. Selecting support for a language means translations,\n" "fonts, spell checkers, etc. for that language will be installed.\n" "Additionally, the \"Use Unicode by default\" checkbox allows to force the\n" "system to use unicode (UTF-8). Note however that this is an experimental\n" "feature. If you select different languages requiring different encoding the\n" "unicode support will be installed anyway.\n" "\n" "To switch between the various languages installed on the system, you can\n" "launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n" "language used by the entire system. Running the command as a regular user\n" "will only change the language settings for that particular user." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Depending on the default language you chose in Section , DrakX will\n" "automatically select a particular type of keyboard configuration. However,\n" "you might not have a keyboard that corresponds exactly to your language:\n" "for example, if you are an English speaking Swiss person, you may have a\n" "Swiss keyboard. Or if you speak English but are located in Quebec, you may\n" "find yourself in the same situation where your native language and keyboard\n" "do not match. In either case, this installation step will allow you to\n" "select an appropriate keyboard from a list.\n" "\n" "Click on the \"More \" button to be presented with the complete list of\n" "supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding that will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "This step is activated only if an old GNU/Linux partition has been found on\n" "your machine.\n" "\n" "DrakX now needs to know if you want to perform a new install or an upgrade\n" "of an existing Mandrake Linux system:\n" "\n" " * \"Install\": For the most part, this completely wipes out the old\n" "system. If you wish to change how your hard drives are partitioned, or\n" "change the file system, you should use this option. However, depending on\n" "your partitioning scheme, you can prevent some of your existing data from\n" "being over- written.\n" "\n" " * \"Upgrade\": this installation class allows you to update the packages\n" "currently installed on your Mandrake Linux system. Your current\n" "partitioning scheme and user data is not altered. Most of other\n" "configuration steps remain available, similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n" "running version \"8.1\" or later. Performing an Upgrade on versions prior\n" "to Mandrake Linux version \"8.1\" is not recommended." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "\"Country\": check the current country selection. If you are not in this\n" "country, click on the \"Configure\" button and choose another one. If your\n" "country is not in the first list shown, click the \"More\" button to get\n" "the complete country list." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or from another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"Clear all\": this option deletes all partitions on the selected hard\n" "drive\n" "\n" " * \"Auto allocate\": this option enables you to automatically create ext3\n" "and swap partitions in free space of your hard drive\n" "\n" "\"More\": gives access to additional features:\n" "\n" " * \"Save partition table\": saves the partition table to a floppy. Useful\n" "for later partition-table recovery, if necessary. It is strongly\n" "recommended that you perform this step.\n" "\n" " * \"Restore partition table\": allows you to restore a previously saved\n" "partition table from a floppy disk.\n" "\n" " * \"Rescue partition table\": if your partition table is damaged, you can\n" "try to recover it using this option. Please be careful and remember that it\n" "doesn't always work.\n" "\n" " * \"Reload partition table\": discards all changes and reloads the\n" "partition table that was originally on the hard drive.\n" "\n" " * \"Removable media automounting\": unchecking this option will force\n" "users to manually mount and unmount removable medias such as floppies and\n" "CD-ROMs.\n" "\n" " * \"Wizard\": use this option if you wish to use a wizard to partition\n" "your hard drive. This is recommended if you do not have a good\n" "understanding of partitioning.\n" "\n" " * \"Undo\": use this option to cancel your changes.\n" "\n" " * \"Toggle to normal/expert mode\": allows additional actions on\n" "partitions (type, options, format) and gives more information about the\n" "hard drive.\n" "\n" " * \"Done\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "At this point, DrakX will allow you to choose the security level desired\n" "for the machine. As a rule of thumb, the security level should be set\n" "higher if the machine will contain crucial data, or if it will be a machine\n" "directly exposed to the Internet. The trade-off of a higher security level\n" "is generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, keep the default option." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Bugs may have been\n" "fixed, security issues resolved. To allow you to benefit from these\n" "updates, you are now able to download them from the Internet. Check \"Yes\"\n" "if you have a working Internet connection, or \"No\" if you prefer to\n" "install updated packages later.\n" "\n" "Choosing \"Yes\" will display a list of places from which updates can be\n" "retrieved. Choose the one nearest you. A package-selection tree will\n" "appear: review the selection, and press \"Install\" to retrieve and install\n" "the selected package(s), or \"Cancel\" to abort." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a file system).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "it.\n" "\n" "Click on \"Next ->\" when you are ready to format partitions.\n" "\n" "Click on \"<- Previous\" if you want to choose another partition for your\n" "new Mandrake Linux operating system installation.\n" "\n" "Click on \"Advanced\" if you wish to select partitions that will be checked\n" "for bad blocks on the disk." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to use. Just click \"Next ->\" to reboot the system. The first thing\n" "you should see after your computer has finished doing its hardware tests is\n" "the bootloader menu, giving you the choice of which operating system to\n" "start.\n" "\n" "The \"Advanced\" button shows two more buttons to:\n" "\n" " * \"generate auto-install floppy\": to create an installation floppy disk\n" "that will automatically perform a whole installation without the help of an\n" "operator, similar to the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"Replay\". This is a partially automated installation. The\n" "partitioning step is the only interactive procedure.\n" "\n" " * \"Automated\". Fully automated installation: the hard disk is\n" "completely rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a number of similar machines.\n" "See the Auto install section on our web site for more information.\n" "\n" " * \"Save packages selection\"(*): saves a list of the package selected in\n" "this installation. To use this selection with another installation, insert\n" "the floppy and start the installation. At the prompt, press the [F1] key\n" "and type >>linux defcfg=\"floppy\" <<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "At this point, you need to decide where you want to install the Mandrake\n" "Linux operating system on your hard drive. If your hard drive is empty or\n" "if an existing operating system is using all the available space you will\n" "have to partition the drive. Basically, partitioning a hard drive consists\n" "of logically dividing it to create the space needed to install your new\n" "Mandrake Linux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to lost data if there is an existing operating system already\n" "installed on the drive, partitioning can be intimidating and stressful if\n" "you are an inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on your hard drive configuration, several options are available:\n" "\n" " * \"Use free space\": this option will perform an automatic partitioning\n" "of your blank drive(s). If you use this option there will be no further\n" "prompts.\n" "\n" " * \"Use existing partition\": the wizard has detected one or more existing\n" "Linux partitions on your hard drive. If you want to use them, choose this\n" "option. You will then be asked to choose the mount points associated with\n" "each of the partitions. The legacy mount points are selected by default,\n" "and for the most part it's a good idea to keep them.\n" "\n" " * \"Use the free space on the Windows partition\": if Microsoft Windows is\n" "installed on your hard drive and takes all the space available on it, you\n" "have to create free space for Linux data. To do so, you can delete your\n" "Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n" "or resize your Microsoft Windows FAT partition. Resizing can be performed\n" "without the loss of any data, provided you previously defragment the\n" "Windows partition and that it uses the FAT format. Backing up your data is\n" "strongly recommended.. Using this option is recommended if you want to use\n" "both Mandrake Linux and Microsoft Windows on the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "then when you started. You will have less free space under Microsoft\n" "Windows to store your data or to install new software.\n" "\n" " * \"Erase entire disk\": if you want to delete all data and all partitions\n" "present on your hard drive and replace them with your new Mandrake Linux\n" "system, choose this option. Be careful, because you will not be able to\n" "undo your choice after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"Remove Windows\": this will simply erase everything on the drive and\n" "begin fresh, partitioning everything from scratch. All data on your disk\n" "will be lost.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Custom disk partitioning\": choose this option if you want to manually\n" "partition your hard drive. Be careful -- it is a powerful but dangerous\n" "choice and you can very easily lose all your data. That's why this option\n" "is really only recommended if you have done something like this before and\n" "have some experience. For more instructions on how to use the DiskDrake\n" "utility, refer to the ``Managing Your Partitions '' section in the\n" "``Starter Guide''." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Finally, you will be asked whether you want to see the graphical interface\n" "at boot. Note this question will be asked even if you chose not to test the\n" "configuration. Obviously, you want to answer \"No\" if your machine is to\n" "act as a server, or if you were not successful in getting the display\n" "configured." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then proposed to choose the server that\n" "best suits your needs." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Resolution\n" "\n" " You can choose here resolutions and color depth between those available\n" "for your hardware. Choose the one that best suit your needs (you will be\n" "able to change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Monitor\n" "\n" " The installer can normally automatically detect and configure the\n" "monitor connected to your machine. If it is not the case, you can choose in\n" "this list the monitor you actually own." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n" "\n" "You will be presented the list of different parameters to change to get an\n" "optimal graphical display: Graphic Card\n" "\n" " The installer can normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose in this list the card you actually own.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then proposed to choose the server that\n" "best suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " The installer can normally automatically detect and configure the\n" "monitor connected to your machine. If it is not the case, you can choose in\n" "this list the monitor you actually own.\n" "\n" "\n" "\n" "Resolution\n" "\n" " You can choose here resolutions and color depth between those available\n" "for your hardware. Choose the one that best suit your needs (you will be\n" "able to change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor.\n" "\n" "\n" "\n" "Test\n" "\n" " the system will try to open a graphical screen at the desired\n" "resolution. If you can see the message during the test and answer \"Yes\",\n" "then DrakX will proceed to the next step. If you cannot see the message, it\n" "means that some part of the autodetected configuration was incorrect and\n" "the test will automatically end after 12 seconds, bringing you back to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " You can here choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"No\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Graphic Card\n" "\n" " The installer can normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose in this list the card you actually own.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then proposed to choose the server that\n" "best suits your needs." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n" "system clock and the hardware clock are in the same timezone. This is\n" "useful when the machine also hosts another operating system like Windows.\n" "\n" "The \"Automatic time synchronization \" option will automatically regulate\n" "the clock by connecting to a remote time server on the Internet. For this\n" "feature to work, you must have a working Internet connection. It is best to\n" "choose a time server located near you. This option actually installs a time\n" "server that can used by other machines on your local network." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "This dialog is used to choose which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all the services available on the current installation.\n" "Review each one carefully and uncheck those which are not always needed at\n" "boot time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you are not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services that you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" "Sedaj lahko izberete servise, ki se naj zaženejo pri zagonu. Ko boste z\n" "miško nad servisom, se vam bo prikazal balonček s pomočjo, ki opisuje\n" "vlogo posameznega servisa.\n" "\n" "Bodite posebej pozorni pri tem koraku, če boste računalnik uporabljali kot\n" "strežnik: verjetno ne boste želeli poganjati servisov, ki jih ne želite." #: ../../help.pm:1 #, c-format msgid "" "\"Printer\": clicking on the \"Configure\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used during installation." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "You will now set up your Internet/network connection. If you wish to\n" "connect your computer to the Internet or to a local network, click \"Next\n" "->\". Mandrake Linux will attempt to autodetect network devices and modems.\n" "If this detection fails, uncheck the \"Use auto detection\" box. You may\n" "also choose not to configure the network, or to do it later, in which case\n" "clicking the \"Cancel\" button will take you to the next step.\n" "\n" "When configuring your network, the available connections options are:\n" "traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n" "simple LAN connection (Ethernet).\n" "\n" "We will not detail each configuration option - just make sure that you have\n" "all the parameters, such as IP address, default gateway, DNS servers, etc.\n" "from your Internet Service Provider or system administrator.\n" "\n" "You can consult the ``Starter Guide'' chapter about Internet connections\n" "for details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "If you told the installer that you wanted to individually select packages,\n" "it will present a tree containing all packages classified by groups and\n" "subgroups. While browsing the tree, you can select entire groups,\n" "subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right to let you know the purpose of the package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you will be asked to confirm that you really want those servers to be\n" "installed. By default Mandrake Linux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that that\n" "security holes are discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"No\". Clicking \"Yes \" will\n" "install the listed services and they will be started automatically by\n" "default during boot. !!\n" "\n" "The \"Automatic dependencies\" option is used to disable the warning dialog\n" "which appears whenever the installer automatically selects a package to\n" "resolve a dependency issue. Some packages have relationships between each\n" "other such that installation of a package requires that some other program\n" "is already installed. The installer can determine which packages are\n" "required to satisfy a dependency to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert a floppy disk previously created at the\n" "end of another installation. See the second tip of last step on how to\n" "create such a floppy." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "to make it simpler to manage the packages have been placed into groups of\n" "similar applications.\n" "\n" "Packages are sorted into groups corresponding to a particular use of your\n" "machine. Mandrake Linux has four predefined installations available. You\n" "can think of these installation classes as containers for various packages.\n" "You can mix and match applications from the various containers, so a\n" "``Workstation'' installation can still have applications from the\n" "``Development'' container installed.\n" "\n" " * \"Workstation\": if you plan to use your machine as a workstation,\n" "select one or more of the applications that are in the workstation\n" "container.\n" "\n" " * \"Development\": if plan on using your machine for programming, choose\n" "the appropriate packages from the container.\n" "\n" " * \"Server\": if your machine is intended to be a server, select which of\n" "the more common services you wish to install on your machine.\n" "\n" " * \"Graphical Environment\": this is where you will choose your preferred\n" "graphical environment. At least one must be selected if you want to have a\n" "graphical interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you unselect all groups when performing a regular\n" "installation (as opposed to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"With X\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"With basic documentation\": installs the base system plus basic\n" "utilities and their documentation. This installation is suitable for\n" "setting up a server.\n" "\n" " * \"Truly minimal install\": will install the absolute minimum number of\n" "packages necessary to get a working Linux system. With this installation\n" "you will only have a command line interface. The total size of this\n" "installation is 65 megabytes.\n" "\n" "You can check the \"Individual package selection\" box, which is useful if\n" "you are familiar with the packages being offered or if you want to have\n" "total control over what will be installed.\n" "\n" "If you started the installation in \"Upgrade\" mode, you can unselect all\n" "groups to avoid installing any new package. This is useful for repairing or\n" "updating an existing system." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM so it will eject\n" "the current CD and ask you to insert the correct CD as required." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Here are Listed the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "GNU/Linux is a multi-user system, meaning each user can have their own\n" "preferences, their own files and so on. You can read the ``Starter Guide''\n" "to learn more about multi-user systems. But unlike \"root\", which is the\n" "system administrator, the users you add at this point will not be\n" "authorized to change anything except their own files and their own\n" "configuration, protecting the system from unintentional or malicious\n" "changes that impact the system as a whole. You will have to create at least\n" "one regular user for yourself -- this is the account which you should use\n" "for routine, day-to-day use. Although it is very easy to log in as \"root\"\n" "to do anything and everything, it may also be very dangerous! A mistake\n" "could mean that your system would not work any more. If you make a serious\n" "mistake as a regular user, the worst that will happen is that you will lose\n" "some information, but not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you typed in and copy it to the \"User name\" field, which is the name this\n" "user will enter to log onto the system. If you like, you may override the\n" "default and change the username. The next step is to enter a password. From\n" "a security point of view, a non-privileged (regular) user password is not\n" "as crucial as the \"root\" password, but that is no reason to neglect it by\n" "making it blank or too simple: after all, your files could be the ones at\n" "risk.\n" "\n" "Once you click on \"Accept user\", you can add other users. Add a user for\n" "each one of your friends: your father or your sister, for example. Click\n" "\"Next ->\" when you have finished adding users.\n" "\n" "Clicking the \"Advanced\" button allows you to change the default \"shell\"\n" "for that user (bash by default).\n" "\n" "When you are finished adding all users, you will be asked to choose a user\n" "that can automatically log into the system when the computer boots up. If\n" "you are interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click \"Next\n" "->\". If you are not interested in this feature, uncheck the \"Do you want\n" "to use this feature?\" box." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandrake Linux distribution. If you do agree with all the\n" "terms in it, check the \"Accept\" box. If not, simply turn off your\n" "computer." msgstr "" #: ../../install2.pm:1 #, c-format msgid "You must also format %s" msgstr "" #: ../../install2.pm:1 #, c-format msgid "" "Can't access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" #: ../../install_any.pm:1 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "Prišlo je do napake - ni veljavnih naprav na katerih bi se lahko ustvaril " "nov datotečni sistem. Preverite strojno opremo za možen vzrok problema" #: ../../install_any.pm:1 ../../partition_table.pm:1 #, c-format msgid "Error reading file %s" msgstr "" #: ../../install_any.pm:1 #, c-format msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" #: ../../install_any.pm:1 #, c-format msgid "This floppy is not FAT formatted" msgstr "" #: ../../install_any.pm:1 #, fuzzy, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "Izberite strežnik" #: ../../install_any.pm:1 #, c-format msgid "Can't use broadcast with no NIS domain" msgstr "" #: ../../install_any.pm:1 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" #: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1 #: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 #: ../../standalone/harddrake2:1 #, c-format msgid "No" msgstr "Ne" #: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1 #: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1 #: ../../standalone/harddrake2:1 #, c-format msgid "Yes" msgstr "Da" #: ../../install_any.pm:1 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" #: ../../install_gtk.pm:1 #, fuzzy, c-format msgid "System configuration" msgstr "Nastavitev zaslona" #: ../../install_gtk.pm:1 #, fuzzy, c-format msgid "System installation" msgstr "Namestitev SILO" #: ../../install_interactive.pm:1 #, c-format msgid "Bringing down the network" msgstr "Izklop omrežja" #: ../../install_interactive.pm:1 #, c-format msgid "Bringing up the network" msgstr "Vklop omrežja" #: ../../install_interactive.pm:1 #, c-format msgid "Partitioning failed: %s" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "DrakX-ov čarovnik za razdelke je najdel naslednje rešitve:" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "I can't find any room for installing" msgstr "Razdelkov ni več mogoče dodati" #: ../../install_interactive.pm:1 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "Sedej lahko ustvarjate/spreminjate razdelke na %s.\n" "Po končanem delu ne pozabite shraniti sprememb z ukazom `w'" #: ../../install_interactive.pm:1 #, c-format msgid "Use fdisk" msgstr "Uporabi fdisk" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "Custom disk partitioning" msgstr "Uporabi obstoječ razdelek" #: ../../install_interactive.pm:1 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "VSI razdelki in podatki na disku %s bodo izgubljeni" #: ../../install_interactive.pm:1 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "Imate več kot en trdi disk, na katerega želite namestiti Linux?" #: ../../install_interactive.pm:1 #, c-format msgid "Erase entire disk" msgstr "Brisanje celotnega diska" #: ../../install_interactive.pm:1 #, c-format msgid "Remove Windows(TM)" msgstr "Odstranjevanje Oken(TM)" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "" "Ni več razdelkov FAT za spremembo velikosti ali uporabo kot loopback\n" "(ali premalo prostora)" #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "FAT resizing failed: %s" msgstr "Spreminjanje velikosti FAT neuspešno: %s" #: ../../install_interactive.pm:1 #, c-format msgid "Resizing Windows partition" msgstr "Računanje mej datotečnega sistema Oken (Windows)" #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Resizing" msgstr "Spreminjanje velikosti" #: ../../install_interactive.pm:1 #, c-format msgid "partition %s" msgstr "razdelek %s" #: ../../install_interactive.pm:1 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful:\n" "this operation is dangerous. If you have not already done\n" "so, you should first exit the installation, run scandisk\n" "under Windows (and optionally run defrag), then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "OPOZORILO!\n" "\n" "DrakX bo sedaj spremenil velikost razdelku Oken (Windows). Bodite previdni:\n" "ta operacija je nevarna. Če tega še niste opravili, končajte namestitev in\n" "zaženite scandisk pod Okni (če želite poženite še defrag), nato ponovno\n" "zaženite namestitev. Naredite tudi varnostno kopijo podatkov.\n" "Če ste prepričani, pritisnite \"V redu\"." #: ../../install_interactive.pm:1 #, c-format msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrake Linux " "installation." msgstr "" "Vaš razdelek Oken (Windows) je preveč fragmentiran. Najprej poženite " "``defrag''" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "Computing the size of the Windows partition" msgstr "Uporabi razpoložljiv prostor v razdelku Oken (Windows)" #: ../../install_interactive.pm:1 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" "Spreminjalec velikosti FAT ne deluje na vašem razdelku, \n" "prišlo je do naslednje napake: %s" #: ../../install_interactive.pm:1 #, c-format msgid "Which partition do you want to resize?" msgstr "Kateremu razdeleku želite spremeniti velikost?" #: ../../install_interactive.pm:1 #, c-format msgid "Use the free space on the Windows partition" msgstr "Uporabi razpoložljiv prostor v razdelku Oken (Windows)" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "" "Ni več razdelkov FAT za spremembo velikosti ali uporabo kot loopback\n" "(ali premalo prostora)" #: ../../install_interactive.pm:1 #, c-format msgid "Swap partition size in MB: " msgstr "Velikost razdelka swap v MB: " #: ../../install_interactive.pm:1 #, c-format msgid "Root partition size in MB: " msgstr "Velikost korenskega razdelka v MB: " #: ../../install_interactive.pm:1 #, c-format msgid "Choose the sizes" msgstr "Izberite velikosti" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "Kateri razdelek želite uporabiti za Linux4Win?" #: ../../install_interactive.pm:1 #, c-format msgid "Use the Windows partition for loopback" msgstr "Uporabi razdelek Oken (Windows) za loopback" #: ../../install_interactive.pm:1 #, c-format msgid "There is no existing partition to use" msgstr "Na voljno ni nobenega obstoječega razdelka" #: ../../install_interactive.pm:1 #, c-format msgid "Use existing partitions" msgstr "Uporabi obstoječ razdelek" #: ../../install_interactive.pm:1 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "Premalo razpoložljivega prostora za nov razdelek" #: ../../install_interactive.pm:1 #, c-format msgid "Use free space" msgstr "Uporabi razpoložljiv prostor" #: ../../install_interactive.pm:1 ../../install_steps.pm:1 #, fuzzy, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "Potrebujete razdelek swap" #: ../../install_interactive.pm:1 #, c-format msgid "" "You don't have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "Nimate razdelka swap\n" "\n" "Naj vseeno nadaljujem?" #: ../../install_interactive.pm:1 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Potrebujete korenski razdelek.\n" "Ustvarite nov razdelek (ali izberite obstoječega).\n" "Nato izberite ``Točka priključitve'' in jo nastavite na `/'" #: ../../install_interactive.pm:1 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" #: ../../install_messages.pm:1 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandrake " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" #: ../../install_messages.pm:1 #, c-format msgid "http://www.mandrakelinux.com/en/91errata.php3" msgstr "" #: ../../install_messages.pm:1 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" #: ../../install_messages.pm:1 #, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" #: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1 #, c-format msgid "Entering step `%s'\n" msgstr "Vstop v korak `%s'\n" #: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 #: ../../standalone/harddrake2:1 #, c-format msgid "Help" msgstr "Pomoč" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "not configured" msgstr "Nastavitev X" #: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Configure" msgstr "Nastavitev X" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Go on anyway?" msgstr "Naj vseeno nadaljujem?" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error installing packages:" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error ordering packages:" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Refuse" msgstr "Spremeni velikost" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #: ../../standalone/drakautoinst:1 #, c-format msgid "Accept" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Installing package %s" msgstr "Nameščanje paketa %s" #: ../../install_steps_gtk.pm:1 #, c-format msgid "%d packages" msgstr "" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "No details" msgstr "Podrobnosti" #: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Details" msgstr "Podrobnosti" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "Please wait, preparing installation..." msgstr "Priprava namestitbe" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Time remaining " msgstr "Preostal čas " #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "Estimating" msgstr "Zaganjam X" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Installing" msgstr "Nameščanje" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the packages you want to install" msgstr "Izberite pakete, ki jih želite namestiti" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "Minimal install" msgstr "Izhod iz namestitve" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Updating package selection" msgstr "" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "Load/Save on floppy" msgstr "Shrani na disketo" #: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1 #: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 #, c-format msgid "<- Previous" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #: ../../standalone/drakbackup:1 #, c-format msgid "Install" msgstr "Namestiti" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Show automatically selected packages" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It must be upgraded" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It is already installed" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "This is a mandatory package, it can't be unselected" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't select/unselect this package" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "The following packages are going to be removed" msgstr "" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "The following packages are going to be installed" msgstr "Izberite kartico" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "You can't select this package as there is not enough space left to install it" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Importance: %s\n" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Size: %d KB\n" msgstr "Velikost: %d KB\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Version: %s\n" msgstr "Različica: %s\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Name: %s\n" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Bad package" msgstr "" #: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Other" msgstr "Drugo" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Total size: %d / %d MB" msgstr "" #: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1 #: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 #, c-format msgid "Next ->" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Individual package selection" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Package Group Selection" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Save packages selection" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Automated" msgstr "Prilagojeno" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Replay" msgstr "Naloži ponovno" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Generate auto install floppy" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Reboot" msgstr "Korenski" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Creating auto install floppy..." msgstr "" #: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Installation of bootloader failed. The following error occured:" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Installing bootloader" msgstr "Namestitev zagonskega nalagalnika" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Do you want to use aboot?" msgstr "Ali želite zdaj zagnati ,X -probeonly`?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX or some other means to boot your machine" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing bootloader..." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Domain Admin Password" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Domain Admin User Name" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Windows Domain" msgstr "Nastavitve modula:" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Authentication Windows Domain" msgstr "Nastavitve modula:" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "NIS Server" msgstr "Izberite strežnik" #: ../../install_steps_interactive.pm:1 #, c-format msgid "NIS Domain" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Authentication NIS" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "NIS" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "LDAP Server" msgstr "Izberite strežnik" #: ../../install_steps_interactive.pm:1 #, c-format msgid "LDAP Base dn" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Authentication LDAP" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "LDAP" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Local files" msgstr "Lokalno" #: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1 #: ../../standalone/drakconnect:1 ../../standalone/logdrake:1 #, c-format msgid "Authentication" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "" #. -PO: keep this short or else the buttons will not fit in the window #: ../../install_steps_interactive.pm:1 #, c-format msgid "No password" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Set root password" msgstr "Nastavitev gesla root" #: ../../install_steps_interactive.pm:1 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "" #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #, c-format msgid "Services: %d activated for %d registered" msgstr "" #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #, fuzzy, c-format msgid "Services" msgstr "naprava" #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "System" msgstr "Sistemski način" #. -PO: example: lilo-graphic on /dev/hda1 #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "%s on %s" msgstr "Formatiraj" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Bootloader" msgstr "Glavne možnosti zagonskega nalagalnika" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Boot" msgstr "Korenski" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "disabled" msgstr "Tabela" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "activated" msgstr "Aktivno" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Firewall" msgstr "" #: ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, c-format msgid "Security" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Security Level" msgstr "Privzeto" #: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Network" msgstr "Tabela" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Network & Internet" msgstr "Nastavitev zaslona" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Graphical interface" msgstr "X v zagonu" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Hardware" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "TV card" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Do you have an ISA sound card?" msgstr "Imate še kakšnega?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Sound card" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Remote CUPS server" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "No printer" msgstr "Odstrani vnos" #: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1 #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer" msgstr "Izberite strežnik" #: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Mouse" msgstr "Premakni" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Timezone" msgstr "" #: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1 #, c-format msgid "Keyboard" msgstr "" #: ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, c-format msgid "Summary" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "NTP Server" msgstr "Izberite strežnik" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Hardware clock set to GMT" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Which is your timezone?" msgstr "Kateri strežnik potrebujete?" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Would you like to try again?" msgstr "Xconfigurator bo zdaj zagnal X in preveril nastavitve." #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Unable to contact mirror %s" msgstr "Ne morem ustvariti novega procesa: %s" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates ?" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "Izberite strežnik" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "Izberite strežnik" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Post-install configuration" msgstr "Nastavitev zaslona" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing installation" msgstr "Priprava namestitbe" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" #: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "All" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "With basic documentation (recommended!)" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "With X" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Type of install" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Selected size is larger than available space" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Insert a floppy containing package selection" msgstr "Izberite strežnik" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Loading from floppy" msgstr "Obnovi z diskete" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Package selection" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Save on floppy" msgstr "Shrani na disketo" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Load from floppy" msgstr "Obnovi z diskete" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking for available packages..." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Finding packages to upgrade..." msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Looking at packages already installed..." msgstr "Izberite kartico" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can loose data)" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Check bad blocks?" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Choose the partitions you want to format" msgstr "Ali želite zdaj zagnati ,X -probeonly`?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Choose the mount points" msgstr "Ali želite sedaj zagnati ,X -probeonly`?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Scanning partitions to find mount points" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "No partition available" msgstr "Zaganjam X" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Configuring IDE" msgstr "Nastavitev zaslona" #: ../../install_steps_interactive.pm:1 #, c-format msgid "IDE" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Configuring PCMCIA cards..." msgstr "Nastavitev kartic PCMCIA..." #: ../../install_steps_interactive.pm:1 #, c-format msgid "PCMCIA" msgstr "PCMCIA" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 3 Emulation" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 2 Emulation" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Buttons emulation" msgstr "" #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, fuzzy, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "Kateri strežnik potrebujete?" #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format msgid "Mouse Port" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Please choose your type of mouse." msgstr "Ali želite sedaj zagnati ,X -probeonly`?" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Encryption key for %s" msgstr "Gesla se ne ujemata" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Upgrade %s" msgstr "razdelek %s" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Is this an install or an upgrade?" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Install/Upgrade" msgstr "Namestiti" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Here is the full list of keyboards available" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Please choose your keyboard layout." msgstr "Izberite kartico" #: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1 #: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakperm:1 ../../standalone/draksplash:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/scannerdrake:1 #, c-format msgid "Quit" msgstr "Izhod" #: ../../install_steps_interactive.pm:1 #, c-format msgid "License agreement" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "An error occurred" msgstr "" #: ../../install_steps_newt.pm:1 #, c-format msgid "" " / between elements | selects | next screen " msgstr "" #: ../../install_steps_newt.pm:1 #, c-format msgid "Mandrake Linux Installation %s" msgstr "" #: ../../install_steps.pm:1 #, c-format msgid "No floppy drive available" msgstr "Na voljno ni nobenega disketnega pogona" #: ../../install_steps.pm:1 #, c-format msgid "Welcome to %s" msgstr "Pozdravljeni v %s" #: ../../install_steps.pm:1 #, c-format msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" "Nekateri pomembni paketi niso bili ustrezno nameščeni.\n" "Verjetno imate povarjen CD medij ali pogon CD-ROM.\n" "Preverite medij na računlaniku z Linux-om z uporabo ukaza \"rpm -qpl " "Mandrake/RPMS/*.rpm\"\n" #: ../../install_steps.pm:1 #, c-format msgid "Duplicate mount point %s" msgstr "Podvojena točka priklopa %s" #: ../../install_steps.pm:1 #, c-format msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "Prišlo je do napake, ki je sistem ne zna obdelati na lep način.\n" "Nadaljujte na svojo odgovornost." #: ../../interactive.pm:1 ../../harddrake/sound.pm:1 #: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1 #: ../../standalone/service_harddrake:1 #, c-format msgid "Please wait" msgstr "" #: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1 #: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1 #: ../../standalone/drakbackup:1 ../../standalone/draksec:1 #, c-format msgid "Ok" msgstr "V redu" #: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1 #: ../../interactive/newt.pm:1 #, c-format msgid "Finish" msgstr "" #: ../../interactive.pm:1 ../../standalone/draksec:1 #, c-format msgid "Basic" msgstr "" #: ../../interactive.pm:1 #, c-format msgid "Advanced" msgstr "" #: ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, fuzzy, c-format msgid "Remove" msgstr "Odstrani vnos" #: ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, fuzzy, c-format msgid "Modify" msgstr "Spremeni RAID" #: ../../interactive.pm:1 ../../interactive/gtk.pm:1 #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "Add" msgstr "Dodaj" #: ../../interactive.pm:1 #, fuzzy, c-format msgid "Choose a file" msgstr "Izberite akcijo" #: ../../keyboard.pm:1 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Right \"Windows\" key" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Left \"Windows\" key" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "\"Menu\" key" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "CapsLock key" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Control and Shift keys simultaneously" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Both Shift keys simultaneously" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Right Alt key" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Yugoslavian (latin)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Vietnamese \"numeric row\" QWERTY" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "US keyboard (international)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "US keyboard" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "UK keyboard" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Ukrainian" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Turkish (modern \"Q\" model)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Turkish (traditional \"F\" model)" msgstr "" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Tajik keyboard" msgstr "Izberite tipkovnico" #: ../../keyboard.pm:1 #, c-format msgid "Thai keyboard" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Tamil (Typewriter-layout)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Tamil (ISCII-layout)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Serbian (cyrillic)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTY)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTZ)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Slovenian" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Swedish" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Russian (Yawerty)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Russian" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Romanian (qwerty)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Romanian (qwertz)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Canadian (Quebec)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Portuguese" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwertz layout)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwerty layout)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Norwegian" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Dutch" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Maltese (US)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Maltese (UK)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Mongolian (cyrillic)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Myanmar (Burmese)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Macedonian" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Malayalam" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Latvian" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"phonetic\" QWERTY" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"number row\" QWERTY" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (new)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (old)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Laotian" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Latin American" msgstr "" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Korean keyboard" msgstr "Izberite tipkovnico" #: ../../keyboard.pm:1 #, c-format msgid "Japanese 106 keys" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Inuktitut" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Italian" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Icelandic" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Iranian" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Israeli (Phonetic)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Israeli" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Croatian" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Hungarian" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Gurmukhi" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Gujarati" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Greek" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Latin\" layout)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Russian\" layout)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "French" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Finnish" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Spanish" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Estonian" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (Swedish)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (Norwegian)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (US)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Danish" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Devanagari" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "German (no dead keys)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "German" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTY)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTZ)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (French layout)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (German layout)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Belarusian" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Bosnian" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Brazilian (ABNT-2)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Bulgarian (BDS)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Bulgarian (phonetic)" msgstr "" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Bengali" msgstr "Tabela" #: ../../keyboard.pm:1 #, c-format msgid "Belgian" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Azerbaidjani (latin)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Arabic" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (phonetic)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (typewriter)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (old)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Albanian" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Polish" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Zimbabwe" msgstr "Zimbabwe" #: ../../lang.pm:1 #, c-format msgid "Zambia" msgstr "Zambija" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "South Africa" msgstr "Južna Afrika" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Serbia" msgstr "Azerbedžan" #: ../../lang.pm:1 #, c-format msgid "Mayotte" msgstr "Mayotte" #: ../../lang.pm:1 #, c-format msgid "Yemen" msgstr "Jemen" #: ../../lang.pm:1 #, c-format msgid "Samoa" msgstr "Samoa" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Wallis and Futuna" msgstr "Wallis and Futuna Otočje" #: ../../lang.pm:1 #, c-format msgid "Vanuatu" msgstr "Vanuatu" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Vietnam" msgstr "Viet Nam" #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (U.S.)" msgstr "Deviški otoki (Z.D.)" #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (British)" msgstr "Deviški otoki (Britanski)" #: ../../lang.pm:1 #, c-format msgid "Venezuela" msgstr "Venezuela" #: ../../lang.pm:1 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "Saint Vincent and the Grenadines" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Vatican" msgstr "Latvija" #: ../../lang.pm:1 #, c-format msgid "Uzbekistan" msgstr "Uzbekistan" #: ../../lang.pm:1 #, c-format msgid "Uruguay" msgstr "Urugvaj" #: ../../lang.pm:1 #, c-format msgid "United States Minor Outlying Islands" msgstr "Združene države Minor Outlying Otočje" #: ../../lang.pm:1 #, c-format msgid "Uganda" msgstr "Uganda" #: ../../lang.pm:1 #, c-format msgid "Ukraine" msgstr "Ukrajina" #: ../../lang.pm:1 #, c-format msgid "Tanzania" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Taiwan" msgstr "Tajska" #: ../../lang.pm:1 #, c-format msgid "Tuvalu" msgstr "Tuvalu" #: ../../lang.pm:1 #, c-format msgid "Trinidad and Tobago" msgstr "Trinidad in Tobago" #: ../../lang.pm:1 #, c-format msgid "Turkey" msgstr "Turčija" #: ../../lang.pm:1 #, c-format msgid "Tonga" msgstr "Tonga" #: ../../lang.pm:1 #, c-format msgid "Tunisia" msgstr "Tunizija" #: ../../lang.pm:1 #, c-format msgid "Turkmenistan" msgstr "Turkmenistan" #: ../../lang.pm:1 #, c-format msgid "East Timor" msgstr "Vzhodni Timor" #: ../../lang.pm:1 #, c-format msgid "Tokelau" msgstr "Tokelau" #: ../../lang.pm:1 #, c-format msgid "Tajikistan" msgstr "Tajikistan" #: ../../lang.pm:1 #, c-format msgid "Thailand" msgstr "Tajska" #: ../../lang.pm:1 #, c-format msgid "Togo" msgstr "Togo" #: ../../lang.pm:1 #, c-format msgid "French Southern Territories" msgstr "Francoski južni teritoriji" #: ../../lang.pm:1 #, c-format msgid "Chad" msgstr "Čad" #: ../../lang.pm:1 #, c-format msgid "Turks and Caicos Islands" msgstr "Turks and Caicos Otočje" #: ../../lang.pm:1 #, c-format msgid "Swaziland" msgstr "Swaziland" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Syria" msgstr "Suriname" #: ../../lang.pm:1 #, c-format msgid "El Salvador" msgstr "El Salvador" #: ../../lang.pm:1 #, c-format msgid "Sao Tome and Principe" msgstr "Sao Tome and Principe" #: ../../lang.pm:1 #, c-format msgid "Suriname" msgstr "Suriname" #: ../../lang.pm:1 #, c-format msgid "Somalia" msgstr "Somalija" #: ../../lang.pm:1 #, c-format msgid "Senegal" msgstr "Senegal" #: ../../lang.pm:1 #, c-format msgid "San Marino" msgstr "San Marino" #: ../../lang.pm:1 #, c-format msgid "Sierra Leone" msgstr "Sierra Leone" #: ../../lang.pm:1 #, c-format msgid "Slovakia" msgstr "Slovaška" #: ../../lang.pm:1 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "Svalbard and Jan Mayen Islands" #: ../../lang.pm:1 #, c-format msgid "Slovenia" msgstr "Slovenija" #: ../../lang.pm:1 #, c-format msgid "Saint Helena" msgstr "Sveta Helena" #: ../../lang.pm:1 #, c-format msgid "Singapore" msgstr "Singapur" #: ../../lang.pm:1 #, c-format msgid "Sudan" msgstr "Sudan" #: ../../lang.pm:1 #, c-format msgid "Seychelles" msgstr "Seychelles" #: ../../lang.pm:1 #, c-format msgid "Solomon Islands" msgstr "Solomon Otočje" #: ../../lang.pm:1 #, c-format msgid "Saudi Arabia" msgstr "Saudska Arabija" #: ../../lang.pm:1 #, c-format msgid "Rwanda" msgstr "Rwanda" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Russia" msgstr "Avstrija" #: ../../lang.pm:1 #, c-format msgid "Romania" msgstr "Rumunija" #: ../../lang.pm:1 #, c-format msgid "Reunion" msgstr "Reunion" #: ../../lang.pm:1 #, c-format msgid "Qatar" msgstr "Qatar" #: ../../lang.pm:1 #, c-format msgid "Palau" msgstr "Palau" #: ../../lang.pm:1 #, c-format msgid "Paraguay" msgstr "Paragvaj" #: ../../lang.pm:1 #, c-format msgid "Portugal" msgstr "Portugalska" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Palestine" msgstr "Izberite strežnik" #: ../../lang.pm:1 #, c-format msgid "Puerto Rico" msgstr "Puerto Riko" #: ../../lang.pm:1 #, c-format msgid "Pitcairn" msgstr "Pitcairn" #: ../../lang.pm:1 #, c-format msgid "Saint Pierre and Miquelon" msgstr "Saint Pierre and Miquelon" #: ../../lang.pm:1 #, c-format msgid "Poland" msgstr "Poljska" #: ../../lang.pm:1 #, c-format msgid "Pakistan" msgstr "Pakistan" #: ../../lang.pm:1 #, c-format msgid "Philippines" msgstr "Filipini" #: ../../lang.pm:1 #, c-format msgid "Papua New Guinea" msgstr "Papua Nova Gvineja" #: ../../lang.pm:1 #, c-format msgid "French Polynesia" msgstr "Francoska Polinezija" #: ../../lang.pm:1 #, c-format msgid "Peru" msgstr "Peru" #: ../../lang.pm:1 #, c-format msgid "Panama" msgstr "Panama" #: ../../lang.pm:1 #, c-format msgid "Oman" msgstr "Oman" #: ../../lang.pm:1 #, c-format msgid "New Zealand" msgstr "Nova Zelandija" #: ../../lang.pm:1 #, c-format msgid "Niue" msgstr "Niue" #: ../../lang.pm:1 #, c-format msgid "Nauru" msgstr "Nauru" #: ../../lang.pm:1 #, c-format msgid "Nepal" msgstr "Nepal" #: ../../lang.pm:1 #, c-format msgid "Nicaragua" msgstr "Nikaragva" #: ../../lang.pm:1 #, c-format msgid "Nigeria" msgstr "Nigerija" #: ../../lang.pm:1 #, c-format msgid "Norfolk Island" msgstr "Norfolk Otok" #: ../../lang.pm:1 #, c-format msgid "Niger" msgstr "Niger" #: ../../lang.pm:1 #, c-format msgid "New Caledonia" msgstr "Nova Kaledonija" #: ../../lang.pm:1 #, c-format msgid "Namibia" msgstr "Namibija" #: ../../lang.pm:1 #, c-format msgid "Mozambique" msgstr "Mozambik" #: ../../lang.pm:1 #, c-format msgid "Malaysia" msgstr "Malazija" #: ../../lang.pm:1 #, c-format msgid "Mexico" msgstr "Meksiko" #: ../../lang.pm:1 #, c-format msgid "Malawi" msgstr "Malawi" #: ../../lang.pm:1 #, c-format msgid "Maldives" msgstr "Maldivi" #: ../../lang.pm:1 #, c-format msgid "Mauritius" msgstr "Mauritius" #: ../../lang.pm:1 #, c-format msgid "Malta" msgstr "Malta" #: ../../lang.pm:1 #, c-format msgid "Montserrat" msgstr "Montserrat" #: ../../lang.pm:1 #, c-format msgid "Mauritania" msgstr "Mauritania" #: ../../lang.pm:1 #, c-format msgid "Martinique" msgstr "Martinique" #: ../../lang.pm:1 #, c-format msgid "Northern Mariana Islands" msgstr "Northern Mariana Otočje" #: ../../lang.pm:1 #, c-format msgid "Mongolia" msgstr "Mongolija" #: ../../lang.pm:1 #, c-format msgid "Myanmar" msgstr "Myanmar" #: ../../lang.pm:1 #, c-format msgid "Mali" msgstr "Mali" #: ../../lang.pm:1 #, c-format msgid "Macedonia" msgstr "Makedonija" #: ../../lang.pm:1 #, c-format msgid "Marshall Islands" msgstr "Marshallov otočje" #: ../../lang.pm:1 #, c-format msgid "Madagascar" msgstr "Madagaskar" #: ../../lang.pm:1 #, c-format msgid "Moldova" msgstr "Moldova" #: ../../lang.pm:1 #, c-format msgid "Monaco" msgstr "Monako" #: ../../lang.pm:1 #, c-format msgid "Morocco" msgstr "Moroko" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Libya" msgstr "Liberija" #: ../../lang.pm:1 #, c-format msgid "Latvia" msgstr "Latvija" #: ../../lang.pm:1 #, c-format msgid "Luxembourg" msgstr "Luksemburg" #: ../../lang.pm:1 #, c-format msgid "Lithuania" msgstr "Litva" #: ../../lang.pm:1 #, c-format msgid "Lesotho" msgstr "Lesotho" #: ../../lang.pm:1 #, c-format msgid "Liberia" msgstr "Liberija" #: ../../lang.pm:1 #, c-format msgid "Sri Lanka" msgstr "Sri Lanka" #: ../../lang.pm:1 #, c-format msgid "Liechtenstein" msgstr "Liechtenstein" #: ../../lang.pm:1 #, c-format msgid "Saint Lucia" msgstr "Sveta Lucija" #: ../../lang.pm:1 #, c-format msgid "Lebanon" msgstr "Lebanon" #: ../../lang.pm:1 #, c-format msgid "Laos" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Kazakhstan" msgstr "Kazakhstan" #: ../../lang.pm:1 #, c-format msgid "Cayman Islands" msgstr "Kajmansko otočje" #: ../../lang.pm:1 #, c-format msgid "Kuwait" msgstr "Kuvajt" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Korea" msgstr "Premakni" #: ../../lang.pm:1 #, c-format msgid "Korea (North)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Saint Kitts and Nevis" msgstr "Saint Kitts and Nevis" #: ../../lang.pm:1 #, c-format msgid "Comoros" msgstr "Comoros" #: ../../lang.pm:1 #, c-format msgid "Kiribati" msgstr "Kiribati" #: ../../lang.pm:1 #, c-format msgid "Cambodia" msgstr "Kambodža" #: ../../lang.pm:1 #, c-format msgid "Kyrgyzstan" msgstr "Kyrgyzstan" #: ../../lang.pm:1 #, c-format msgid "Kenya" msgstr "Kenija" #: ../../lang.pm:1 #, c-format msgid "Japan" msgstr "Japonska" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Jordan" msgstr "Jordanija" #: ../../lang.pm:1 #, c-format msgid "Jamaica" msgstr "Jamajka" #: ../../lang.pm:1 #, c-format msgid "Iceland" msgstr "Islandija" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Iran" msgstr "Irak" #: ../../lang.pm:1 #, c-format msgid "Iraq" msgstr "Irak" #: ../../lang.pm:1 #, c-format msgid "British Indian Ocean Territory" msgstr "Teritorij Britanskega Indijskega Oceana" #: ../../lang.pm:1 #, c-format msgid "India" msgstr "Indija" #: ../../lang.pm:1 #, c-format msgid "Israel" msgstr "Izrael" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "Ireland" msgstr "Naloži ponovno" #: ../../lang.pm:1 #, c-format msgid "Indonesia" msgstr "Indonezija" #: ../../lang.pm:1 #, c-format msgid "Hungary" msgstr "Madžarska" #: ../../lang.pm:1 #, c-format msgid "Haiti" msgstr "Haiti" #: ../../lang.pm:1 #, c-format msgid "Croatia" msgstr "Hrvaška" #: ../../lang.pm:1 #, c-format msgid "Honduras" msgstr "Honduras" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Heard and McDonald Islands" msgstr "Heard otok and McDonald otočje" #: ../../lang.pm:1 #, c-format msgid "Hong Kong" msgstr "Hong Kong" #: ../../lang.pm:1 #, c-format msgid "Guyana" msgstr "Guyana" #: ../../lang.pm:1 #, c-format msgid "Guinea-Bissau" msgstr "Gvineja-Bisau" #: ../../lang.pm:1 #, c-format msgid "Guam" msgstr "Guam" #: ../../lang.pm:1 #, c-format msgid "Guatemala" msgstr "Gvatemala" #: ../../lang.pm:1 #, fuzzy, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "South Georgia and the South Sandwich Otok" #: ../../lang.pm:1 #, c-format msgid "Equatorial Guinea" msgstr "Ekvatorijalna Gvineja" #: ../../lang.pm:1 #, c-format msgid "Guadeloupe" msgstr "Guadeloupe" #: ../../lang.pm:1 #, c-format msgid "Guinea" msgstr "Gvineja" #: ../../lang.pm:1 #, c-format msgid "Gambia" msgstr "Gambija" #: ../../lang.pm:1 #, c-format msgid "Greenland" msgstr "Greenland" #: ../../lang.pm:1 #, c-format msgid "Gibraltar" msgstr "Gibraltar" #: ../../lang.pm:1 #, c-format msgid "Ghana" msgstr "Gana" #: ../../lang.pm:1 #, c-format msgid "French Guiana" msgstr "Francoska Gvineja" #: ../../lang.pm:1 #, c-format msgid "Georgia" msgstr "Georgia" #: ../../lang.pm:1 #, c-format msgid "Grenada" msgstr "Grenada" #: ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "United Kingdom" msgstr "Združeno kraljestvo" #: ../../lang.pm:1 #, c-format msgid "Gabon" msgstr "Gabon" #: ../../lang.pm:1 #, c-format msgid "Faroe Islands" msgstr "Faroe Otočje" #: ../../lang.pm:1 #, c-format msgid "Micronesia" msgstr "Micronesia" #: ../../lang.pm:1 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "Falklandsko Otočje (Malvinas)" #: ../../lang.pm:1 #, c-format msgid "Fiji" msgstr "Fidži" #: ../../lang.pm:1 #, c-format msgid "Finland" msgstr "Finska" #: ../../lang.pm:1 #, c-format msgid "Ethiopia" msgstr "Etiopija" #: ../../lang.pm:1 #, c-format msgid "Spain" msgstr "Španija" #: ../../lang.pm:1 #, c-format msgid "Eritrea" msgstr "Eritreja" #: ../../lang.pm:1 #, c-format msgid "Western Sahara" msgstr "Zahodna Sahara" #: ../../lang.pm:1 #, c-format msgid "Egypt" msgstr "Egipt" #: ../../lang.pm:1 #, c-format msgid "Estonia" msgstr "Estonija" #: ../../lang.pm:1 #, c-format msgid "Ecuador" msgstr "Ekvador" #: ../../lang.pm:1 #, c-format msgid "Algeria" msgstr "Algerija" #: ../../lang.pm:1 #, c-format msgid "Dominican Republic" msgstr "Dominikanska Republika" #: ../../lang.pm:1 #, c-format msgid "Dominica" msgstr "Dominica" #: ../../lang.pm:1 #, c-format msgid "Denmark" msgstr "Danska" #: ../../lang.pm:1 #, c-format msgid "Djibouti" msgstr "Đibuti" #: ../../lang.pm:1 #, c-format msgid "Cyprus" msgstr "Ciper" #: ../../lang.pm:1 #, c-format msgid "Christmas Island" msgstr "Christmas Otok" #: ../../lang.pm:1 #, c-format msgid "Cape Verde" msgstr "Cape Verde" #: ../../lang.pm:1 #, c-format msgid "Cuba" msgstr "Kuba" #: ../../lang.pm:1 #, c-format msgid "Colombia" msgstr "Kolumbija" #: ../../lang.pm:1 #, c-format msgid "China" msgstr "Kitajska" #: ../../lang.pm:1 #, c-format msgid "Cameroon" msgstr "Kamerun" #: ../../lang.pm:1 #, c-format msgid "Chile" msgstr "Čile" #: ../../lang.pm:1 #, c-format msgid "Cook Islands" msgstr "Cook Otočje" #: ../../lang.pm:1 #, c-format msgid "Cote d'Ivoire" msgstr "Cote d'Ivoire" #: ../../lang.pm:1 #, c-format msgid "Switzerland" msgstr "Švica" #: ../../lang.pm:1 #, c-format msgid "Congo (Brazzaville)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Central African Republic" msgstr "Centralna Afriška Republika" #: ../../lang.pm:1 #, c-format msgid "Congo (Kinshasa)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Cocos (Keeling) Islands" msgstr "Cocos (Keeling) Otočje" #: ../../lang.pm:1 #, c-format msgid "Canada" msgstr "Kanada" #: ../../lang.pm:1 #, c-format msgid "Belize" msgstr "Belize" #: ../../lang.pm:1 #, c-format msgid "Belarus" msgstr "Belorusija" #: ../../lang.pm:1 #, c-format msgid "Botswana" msgstr "Bocvana" #: ../../lang.pm:1 #, c-format msgid "Bouvet Island" msgstr "Bouvet Otok" #: ../../lang.pm:1 #, c-format msgid "Bhutan" msgstr "Butan" #: ../../lang.pm:1 #, c-format msgid "Bahamas" msgstr "Bahami" #: ../../lang.pm:1 #, c-format msgid "Brazil" msgstr "Brazilija" #: ../../lang.pm:1 #, c-format msgid "Bolivia" msgstr "Bolivija" #: ../../lang.pm:1 #, c-format msgid "Brunei Darussalam" msgstr "Brunei Darussalam" #: ../../lang.pm:1 #, c-format msgid "Bermuda" msgstr "Bermudi" #: ../../lang.pm:1 #, c-format msgid "Benin" msgstr "Benin" #: ../../lang.pm:1 #, c-format msgid "Burundi" msgstr "Burundi" #: ../../lang.pm:1 #, c-format msgid "Bahrain" msgstr "Bahrain" #: ../../lang.pm:1 #, c-format msgid "Bulgaria" msgstr "Bolgarija" #: ../../lang.pm:1 #, c-format msgid "Burkina Faso" msgstr "Burkina Faso" #: ../../lang.pm:1 #, c-format msgid "Bangladesh" msgstr "Bangladeš" #: ../../lang.pm:1 #, c-format msgid "Barbados" msgstr "Barbados" #: ../../lang.pm:1 #, c-format msgid "Bosnia and Herzegovina" msgstr "Bosna in Hercegovina" #: ../../lang.pm:1 #, c-format msgid "Azerbaijan" msgstr "Azerbedžan" #: ../../lang.pm:1 #, c-format msgid "Aruba" msgstr "Aruba" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Australia" msgstr "Avstralija" #: ../../lang.pm:1 #, c-format msgid "American Samoa" msgstr "Ameriška Samoa" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Argentina" msgstr "Argentina" #: ../../lang.pm:1 #, c-format msgid "Antarctica" msgstr "Antartika" #: ../../lang.pm:1 #, c-format msgid "Angola" msgstr "Angola" #: ../../lang.pm:1 #, c-format msgid "Netherlands Antilles" msgstr "Nizozemski Antili" #: ../../lang.pm:1 #, c-format msgid "Armenia" msgstr "Armenija" #: ../../lang.pm:1 #, c-format msgid "Albania" msgstr "Albanija" #: ../../lang.pm:1 #, c-format msgid "Anguilla" msgstr "Anguilla" #: ../../lang.pm:1 #, c-format msgid "Antigua and Barbuda" msgstr "Antigua in Barbuda" #: ../../lang.pm:1 #, c-format msgid "United Arab Emirates" msgstr "Združeni Arabski Emirati" #: ../../lang.pm:1 #, c-format msgid "Andorra" msgstr "Andora" #: ../../lang.pm:1 #, c-format msgid "Afghanistan" msgstr "Afganistan" #: ../../lang.pm:1 #, c-format msgid "default:LTR" msgstr "default:LTR" #: ../../loopback.pm:1 #, c-format msgid "Circular mounts %s\n" msgstr "Krožni priklopi %s\n" #: ../../lvm.pm:1 #, c-format msgid "Remove the logical volumes first\n" msgstr "" #: ../../modules.pm:1 #, c-format msgid "" "PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." msgstr "" #: ../../mouse.pm:1 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "To activate the mouse," msgstr "Preizkusite miško" #: ../../mouse.pm:1 #, c-format msgid "Please test the mouse" msgstr "Preizkusite miško" #: ../../mouse.pm:1 #, c-format msgid "No mouse" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "none" msgstr "nič" #: ../../mouse.pm:1 #, c-format msgid "3 buttons" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "2 buttons" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "1 button" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "busmouse" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Kensington Thinking Mouse" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "MM HitTablet" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "MM Series" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Genius NetMouse" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Logitech CC Series" msgstr "" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Mouse Systems" msgstr "Tip miške: %s\n" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Microsoft IntelliMouse" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Generic 3 Button Mouse" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Generic 2 Button Mouse" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "serial" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Microsoft Explorer" msgstr "" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Wheel" msgstr "stopnja" #: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Generic" msgstr "Splošno" #: ../../mouse.pm:1 #, c-format msgid "Genius NetScroll" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "GlidePoint" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Generic PS2 Wheel Mouse" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+" msgstr "" #: ../../mouse.pm:1 ../../security/level.pm:1 #, c-format msgid "Standard" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Sun - Mouse" msgstr "" #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Toggle between flat and group sorted" msgstr "" #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Collapse Tree" msgstr "" #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Expand Tree" msgstr "" #: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Info" msgstr "Informacije" #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Is this correct?" msgstr "" #: ../../my_gtk.pm:1 #, c-format msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "Error writing to file %s" msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "Bad backup file" msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "Restoring from file %s failed: %s" msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "Extended partition not supported on this platform" msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "mount failed: " msgstr "priklop neuspešen: " #: ../../pkgs.pm:1 #, c-format msgid "maybe" msgstr "" #: ../../pkgs.pm:1 #, fuzzy, c-format msgid "nice" msgstr "Preklic" #: ../../pkgs.pm:1 #, c-format msgid "very nice" msgstr "" #: ../../pkgs.pm:1 #, c-format msgid "important" msgstr "" #: ../../pkgs.pm:1 #, c-format msgid "must have" msgstr "" #: ../../raid.pm:1 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "" #: ../../raid.pm:1 #, c-format msgid "mkraid failed" msgstr "" #: ../../raid.pm:1 #, c-format msgid "mkraid failed (maybe raidtools are missing?)" msgstr "" #: ../../raid.pm:1 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "" #: ../../services.pm:1 #, fuzzy, c-format msgid "Stop" msgstr "Sektor" #: ../../services.pm:1 #, fuzzy, c-format msgid "Start" msgstr "Meni Start" #: ../../services.pm:1 #, fuzzy, c-format msgid "On boot" msgstr "Korenski" #: ../../services.pm:1 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" #: ../../services.pm:1 #, c-format msgid "Services and deamons" msgstr "" #: ../../services.pm:1 #, fuzzy, c-format msgid "stopped" msgstr "Pripni" #: ../../services.pm:1 #, fuzzy, c-format msgid "running" msgstr "Opozorilo" #: ../../services.pm:1 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "" #: ../../services.pm:1 #, fuzzy, c-format msgid "Database Server" msgstr "Izberite strežnik" #: ../../services.pm:1 #, fuzzy, c-format msgid "Remote Administration" msgstr "Odstrani vnos" #: ../../services.pm:1 #, c-format msgid "File sharing" msgstr "" #: ../../services.pm:1 #, fuzzy, c-format msgid "Internet" msgstr "Nastavitev zaslona" #: ../../services.pm:1 #, fuzzy, c-format msgid "Printing" msgstr "Izberite strežnik" #: ../../services.pm:1 #, c-format msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "" #: ../../services.pm:1 #, c-format msgid "Load the drivers for your usb devices." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" #: ../../services.pm:1 #, fuzzy, c-format msgid "Launch the sound system on your machine" msgstr "Zagon sistema X-Windows pri zagonu sistema" #: ../../services.pm:1 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" #: ../../services.pm:1 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" #: ../../services.pm:1 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" #: ../../services.pm:1 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "" #: ../../services.pm:1 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "" #: ../../standalone.pm:1 #, fuzzy, c-format msgid "Installing packages..." msgstr "Nameščanje paketa %s" #: ../../standalone.pm:1 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation don't ask first confirmation question in " "MandrakeUpdate mode\n" " --no-verify-rpm don't verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" #: ../../standalone.pm:1 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : don't be interactive. To be used with (dis)connect." msgstr "" #: ../../standalone.pm:1 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "" #: ../../standalone.pm:1 #, fuzzy, c-format msgid "[keyboard]" msgstr "Izberite tipkovnico" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]...\n" "Mandrake Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "Font Importation and monitoring " "application \n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--strong : strong verification of font.\n" "--install : accept any font file and any directry.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrake tools\n" " --incident - program should be one of mandrake tools" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Exit install" msgstr "Izhod iz namestitve" #: ../../steps.pm:1 #, fuzzy, c-format msgid "Install updates" msgstr "Namestitev sistema" #: ../../steps.pm:1 #, c-format msgid "Configure services" msgstr "Nastavitev servisov" #: ../../steps.pm:1 #, c-format msgid "Configure X" msgstr "Nastavitev X" #: ../../steps.pm:1 #, c-format msgid "Install bootloader" msgstr "Namestitev zagonskega nalagalnika" #: ../../steps.pm:1 #, c-format msgid "Configure networking" msgstr "Nastavitev omrežja" #: ../../steps.pm:1 #, c-format msgid "Add a user" msgstr "Dodaj uporabnika" #: ../../steps.pm:1 #, fuzzy, c-format msgid "Root password" msgstr "Nastavitev gesla root" #: ../../steps.pm:1 #, c-format msgid "Install system" msgstr "Namestitev sistema" #: ../../steps.pm:1 #, c-format msgid "Choose packages to install" msgstr "Izberite pakete za namestitev" #: ../../steps.pm:1 #, c-format msgid "Format partitions" msgstr "Formatiranje razdelkov" #: ../../steps.pm:1 #, fuzzy, c-format msgid "Partitioning" msgstr "Izberite strežnik" #: ../../steps.pm:1 #, c-format msgid "Choose your keyboard" msgstr "Izberite tipkovnico" #: ../../steps.pm:1 #, c-format msgid "Select installation class" msgstr "Izberite razred namestitve" #: ../../steps.pm:1 #, c-format msgid "Hard drive detection" msgstr "Prepoznavanje trdega diska" #: ../../steps.pm:1 #, c-format msgid "Configure mouse" msgstr "Nastavitev miške" #: ../../steps.pm:1 #, c-format msgid "License" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Language" msgstr "Izberite jezik" #: ../../ugtk2.pm:1 #, c-format msgid "utopia 25" msgstr "" #: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1 #: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfont:1 ../../standalone/net_monitor:1 #, c-format msgid "OK" msgstr "Potrdi" #: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1 #, fuzzy, c-format msgid "logdrake" msgstr "logdrake" #: ../../ugtk.pm:1 #, c-format msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" #: ../../Xconfig/card.pm:1 #, c-format msgid "Xpmac (installation display driver)" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "Vaša kartica lahko uporablja strojno 3D pospeševanje z XFree %s,\n" "PODPORA JE ŠE V RAZVOJU, RAČUNALNIK SE LAHKO PRENEHA ODZIVATI." #: ../../Xconfig/card.pm:1 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "XFree %s z RAZVOJNO strojno 3D pospešitvijo" #: ../../Xconfig/card.pm:1 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "Vaša kartica lahko uporablja strojno 3D pospeševanje z XFree %s." #: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "XFree %s s strojnim 3D pospeševanjem" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Vaša kartica lahko uporablja strojno 3D pospeševanje, ampak samo z XFree %" "s,\n" "PODPORA JE ŠE V RAZVOJU, RAČUNALNIK SE LAHKO PRENEHA ODZIVATI.Vaša kartica " "je podprta s strani XFree %s, kjer je lahko boljša 2D podpora." #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Vaša kartica lahko uporablja strojno 3D pospeševanje, ampak samo z XFree %" "s.\n" "Vaša kartica je podprta s strani XFree %s, kjer je lahko boljša 2D podpora." #: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s" msgstr "XFree %s" #: ../../Xconfig/card.pm:1 #, fuzzy, c-format msgid "Configure only card \"%s\"%s" msgstr "Nastavitev zaslona" #: ../../Xconfig/card.pm:1 #, c-format msgid "Use Xinerama extension" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Configure all heads independently" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Which configuration of XFree do you want to have?" msgstr "Katero nastavitev strežnika XFree želite?" #: ../../Xconfig/card.pm:1 #, c-format msgid "XFree configuration" msgstr "Nastavitev XFree" #: ../../Xconfig/card.pm:1 #, c-format msgid "Select the memory size of your graphics card" msgstr "Izberite velikost pomnilnika grafične kartice" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" #: ../../Xconfig/card.pm:1 #, fuzzy, c-format msgid "Multi-head configuration" msgstr "Nastavitev zaslona" #: ../../Xconfig/card.pm:1 #, fuzzy, c-format msgid "Choose an X server" msgstr "Izberite strežnik X" #: ../../Xconfig/card.pm:1 #, c-format msgid "X server" msgstr "Strežnik X" #: ../../Xconfig/card.pm:1 #, c-format msgid "64 MB or more" msgstr "64 MB ali več" #: ../../Xconfig/card.pm:1 #, c-format msgid "32 MB" msgstr "32 MB" #: ../../Xconfig/card.pm:1 #, c-format msgid "16 MB" msgstr "16 MB" #: ../../Xconfig/card.pm:1 #, c-format msgid "8 MB" msgstr "8 MB" #: ../../Xconfig/card.pm:1 #, c-format msgid "4 MB" msgstr "4 MB" #: ../../Xconfig/card.pm:1 #, c-format msgid "2 MB" msgstr "2 MB" #: ../../Xconfig/card.pm:1 #, c-format msgid "1 MB" msgstr "1 MB" #: ../../Xconfig/card.pm:1 #, c-format msgid "512 kB" msgstr "512 kB" #: ../../Xconfig/card.pm:1 #, c-format msgid "256 kB" msgstr "256 kB" #: ../../Xconfig/main.pm:1 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "Ohrani spremembe?\n" "Trenutna nastavitev:\n" "\n" "%s" #: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Options" msgstr "Možnosti" #: ../../Xconfig/main.pm:1 #, c-format msgid "Test" msgstr "" #: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolution" msgstr "Ločljivost" #: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Monitor" msgstr "Monitor" #: ../../Xconfig/main.pm:1 #, fuzzy, c-format msgid "Graphic Card" msgstr "Grafična kartica" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Vertical refresh rate" msgstr "Vertikalna sinhronizacija" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Horizontal refresh rate" msgstr "Horizontalna sinhronizacija" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "Kritična parametra sta: vertikalna osvežitev (to je hitrost s katero je " "osvežen celoten zaslon) in najbolj pomembna horizontalna osvežitev (to je " "hitrost s katero so osvežene vrstice).\n" "\n" "ZELO POMEMBNO je, da ne izberete monitorja z osvežitvami, ki so izven " "sposobnosti vašega monitorja. S tem lahko poškodujete monitor!\n" "Če ste v dvomih, izberite konservativno nastavitev." #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "" #: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Vendor" msgstr "Razveljavi" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play" msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Choose a monitor" msgstr "Izberite monitor" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Graphics card: %s" msgstr "Grafična kartica: %s" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Choose the resolution and the color depth" msgstr "Izberite ločljivost in barvno globino" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolutions" msgstr "Ločljivosti" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "4 billion colors (32 bits)" msgstr "4 milijarde barv (32 bitov)" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "16 million colors (24 bits)" msgstr "16 milijonov barv (24 bitov)" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "65 thousand colors (16 bits)" msgstr "65 tisoč barv (16 bitov)" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "32 thousand colors (15 bits)" msgstr "32 tisoč barv (15 bitov)" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "256 colors (8 bits)" msgstr "256 barv (8 bitov)" #: ../../Xconfig/test.pm:1 #, c-format msgid "Is this the correct setting?" msgstr "" #: ../../Xconfig/test.pm:1 #, fuzzy, c-format msgid "Leaving in %d seconds" msgstr "%d sekund" #: ../../Xconfig/test.pm:1 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" #: ../../Xconfig/test.pm:1 #, fuzzy, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "" "Pozor: testiranje te grafične kartice lahko povzroči neodzivanje računalnika" #: ../../Xconfig/test.pm:1 #, c-format msgid "Do you want to test the configuration?" msgstr "Želite preizkusiti nastavitev?" #: ../../Xconfig/test.pm:1 #, c-format msgid "Test of the configuration" msgstr "Preizkus nastavitev" #: ../../Xconfig/various.pm:1 #, fuzzy, c-format msgid "What norm is your TV using?" msgstr "Kateri strežnik potrebujete?" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface " "(XFree) upon booting.\n" "Would you like XFree to start when you reboot?" msgstr "" "Računalnik lahko samodejno pri zagonu sistema zažene strežnik X.\n" "Želite zagnati strežnik X pri zagonu?" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphical interface at startup" msgstr "X v zagonu" #: ../../Xconfig/various.pm:1 #, c-format msgid "XFree86 driver: %s\n" msgstr "Gonilnik XFree86: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "XFree86 server: %s\n" msgstr "Strežnik XFree86: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Resolution: %s\n" msgstr "Ločljivost: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Color depth: %s\n" msgstr "Barvna globina: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphics memory: %s kB\n" msgstr "Grafični pomnilnik: %s kB\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphics card: %s\n" msgstr "Grafična kartica: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Vertikalna frekvenca monitorja: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Horizontalna frekvenca monitorja: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor: %s\n" msgstr "Monitor: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Mouse device: %s\n" msgstr "Naprava miške: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Mouse type: %s\n" msgstr "Tip miške: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Keyboard layout: %s\n" msgstr "Razpored tipkovnice: %s\n" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Options: %s" msgstr "Možnosti: %s" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Mount point: " msgstr "Točka priklopa:" #: ../../diskdrake/dav.pm:1 #, fuzzy, c-format msgid "Server: " msgstr "strežnik" #: ../../diskdrake/dav.pm:1 #, c-format msgid "The URL must begin with http:// or https://" msgstr "" #: ../../diskdrake/dav.pm:1 #, fuzzy, c-format msgid "Please enter the WebDAV server URL" msgstr "Preizkusite miško" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount point" msgstr "Točka priklopa" #: ../../diskdrake/dav.pm:1 #, fuzzy, c-format msgid "Server" msgstr "strežnik" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount" msgstr "Priklopljeno" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Unmount" msgstr "Odklopi" #: ../../diskdrake/dav.pm:1 #, fuzzy, c-format msgid "New" msgstr "nov" #: ../../diskdrake/dav.pm:1 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``%s'' instead" msgstr "Namesto tega uporabite ``%s''" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Type" msgstr "Tip" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``Unmount'' first" msgstr "Najprej uporabite ``Odklopi''" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Delete" msgstr "Izbriši" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Create" msgstr "Ustvari" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Filesystem types:" msgstr "Tipi datotečnih sistemov:" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Empty" msgstr "Prazno" #: ../../diskdrake/hd_gtk.pm:1 #, fuzzy, c-format msgid "Windows" msgstr "Nastavitve modula:" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "HFS" msgstr "HFS" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "SunOS" msgstr "SunOS" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Swap" msgstr "Swap" #: ../../diskdrake/hd_gtk.pm:1 #, fuzzy, c-format msgid "Journalised FS" msgstr "priklop neuspešen" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Ext2" msgstr "Ext2" #: ../../diskdrake/hd_gtk.pm:1 #, fuzzy, c-format msgid "No hard drives found" msgstr "Tiskalnik" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please click on a partition" msgstr "Kliknite na razdelek" #: ../../diskdrake/hd_gtk.pm:1 #, fuzzy, c-format msgid "" "You have one big MicroSoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Imate velik FAT razdelek (ponavadi v uporabi\n" "DOS-a/Oken). Predlagamo vam, da najprej \n" "spremenite velikost tega razdelka (pritisnite\n" "nanj, nato pa pritisnite \"Spremeni velikost\")" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Choose action" msgstr "Izberite akcijo" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Wizard" msgstr "Čarovnik" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Če nameravate uporabiti aboot, pustite dovolj prostega prostora (2048 " "sektorjev je dovolj)\n" "na začetku diska" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please make a backup of your data first" msgstr "Najprej naredite varnostno kopijo podatkov" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Read carefully!" msgstr "Pazljivo preberite!" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key (again)" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key" msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "The encryption keys do not match" msgstr "Gesla se ne ujemata" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose your filesystem encryption key" msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Filesystem encryption key" msgstr "Tip datotečnega sistema: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Type: " msgstr "Tip:" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "on channel %d id %d\n" msgstr "na vodilu %d id %d\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Partition table type: %s\n" msgstr "Tip razdelitvene tabele: %s\n" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "LVM-disks %s\n" msgstr "RAID-diski %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Info: " msgstr "Informacije: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Geometrija: %s cilindrov, %s glav, %s sektorjev\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size: %s\n" msgstr "Velikost: %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Read-only" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Device: " msgstr "Naprava:" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: %s" msgstr "Datoteka loopback: %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "RAID-disks %s\n" msgstr "RAID-diski %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Chunk size %s\n" msgstr "Velikost kosa %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Level %s\n" msgstr "Stopnja %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Prevzet zagonski razdelek\n" " (za zagon MS-DOS, ne za lilo)\n" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "Datoteka(e) loopback: %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "RAID md%s\n" msgstr "RAID ms%s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Mounted\n" msgstr "Priklopljeno\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Not formatted\n" msgstr "Neformatirano\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Formatted\n" msgstr "Formatirano\n" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Cylinder %d to %d\n" msgstr "Cilinder %d do cilinder %d\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid ", %s sectors" msgstr ", %s sektorjev" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size: %s" msgstr "Velikost: %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Start: sector %s\n" msgstr "Začetek: sektor %s\n" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Name: " msgstr "Izberite strežnik" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "Črka DOS pogona: %s (ugibanje)\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "partition %s is now known as %s" msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Removing %s" msgstr "Ločljivost: %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Copying %s" msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Moving files to the new partition" msgstr "Premalo razpoložljivega prostora za nov razdelek" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Hide files" msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Move files to the new partition" msgstr "Premalo razpoložljivega prostora za nov razdelek" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" "Po formatiranju razdelka %s bodo vsi podatki na tem razdelku izgubljeni" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "Preden bodo obveljale spremembe morate ponovno zagnati računalnik" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "Razdelitvena tabela pogona %s bo zapisana na disk!" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "The package %s is needed. Install it?" msgstr "Izberite pakete, ki jih želite namestiti" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "What type of partitioning?" msgstr "Kateri tip razdelitve?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Be careful: this operation is dangerous." msgstr "Bodite previdni: Ta operacija je nevarna." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "chunk size" msgstr "velikost kosa" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "level" msgstr "stopnja" #: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1 #, c-format msgid "device" msgstr "naprava" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Various" msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Mount options" msgstr "Nastavitve modula:" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "File already exists. Use it?" msgstr "Datoteka že obstaja. Jo uporabim?" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "File is already used by another loopback, choose another one" msgstr "Datoteko že uporablja drug loopback, izberite drugo" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Give a file name" msgstr "Pravo ime" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Filesystem type: " msgstr "Tip datotečnega sistema: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size in MB: " msgstr "Velikost v MB: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: " msgstr "Ime loopback datoteke: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback" msgstr "Loopback" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This partition can't be used for loopback" msgstr "Ta razdelek ne more biti uporabljen za loopback" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "LVM name?" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "new" msgstr "nov" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Choose an existing LVM to add to" msgstr "Izberite obstoječ RAID za dodajanje" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose an existing RAID to add to" msgstr "Izberite obstoječ RAID za dodajanje" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving partition..." msgstr "Premikanje razdelka..." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving" msgstr "Premikanje" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which sector do you want to move it to?" msgstr "Na kateri sektor želite premakniti?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Sector" msgstr "Sektor" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which disk do you want to move it to?" msgstr "Na kateri disk želite premakniti?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Move" msgstr "Premakni" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "New size in MB: " msgstr "Velikost v MB: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose the new size" msgstr "Izberite novo velikost" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Resize" msgstr "Spremeni velikost" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" "Po spremembi velikosti razdelka %s bodo vsi podatki na tem razdelku " "izgubljeni" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All data on this partition should be backed-up" msgstr "Podatki na tem razdelku naj bodo arhivirani" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "This partition is not resizeable" msgstr "Kateremu razdeleku želite spremeniti velikost?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Computing FAT filesystem bounds" msgstr "Računanje mej FAT datotečnega sistema" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Where do you want to mount %s?" msgstr "Kam želite priklopiti napravo %s?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "Ne morem izklopiti točke priklopa, ker je ta razdelek uporabljen za " "loopback.\n" "Najprej odstranite loopback" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount device %s?" msgstr "Kam želite priklopiti napravo %s?" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "Kam želite priklopiti loopback datoteko %s?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Switching from ext2 to ext3" msgstr "" #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #, c-format msgid "Which filesystem do you want?" msgstr "Kateri datotečni sistem želite?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Change partition type" msgstr "Spremeni tip razdelka" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" "Po spremembi tipa razdelka %s, bodo vsi podatki na tem razdelku izgubljeni" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Remove the loopback file?" msgstr "Formatiranje loopback datoteko %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Preference: " msgstr "Lastnosti:" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Start sector: " msgstr "Začetni sektor: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Create a new partition" msgstr "Ustvarjanje novega razdelka" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Use for loopback" msgstr "Uporabi za loopback" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Modify RAID" msgstr "Spremeni RAID" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Remove from LVM" msgstr "Odstrani iz RAID" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove from RAID" msgstr "Odstrani iz RAID" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Add to LVM" msgstr "Dodaj k RAID" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Add to RAID" msgstr "Dodaj k RAID" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Format" msgstr "Formatiraj" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Detailed information" msgstr "Pokaži informacije" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Trying to rescue partition table" msgstr "Reševanje razdelitvene tabele" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "Vstavite disketo v disketni pogon\n" "Vsi podatki na tej disketi bodo uničeni" #: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1 #: ../../network/modem.pm:1 #, c-format msgid "Warning" msgstr "Opozorilo" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Select file" msgstr "Izberite datoteko" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "Velikost varnostne kopije zagonske tabele nima enake velikosti\n" "Naj nadaljujem?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Removable media automounting" msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Reload partition table" msgstr "Reševanje razdelitvene tabele" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Rescue partition table" msgstr "Reševanje razdelitvene tabele" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Restore partition table" msgstr "Reševanje razdelitvene tabele" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Save partition table" msgstr "Zapiši razdelitveno tabelo" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "Če želite imeti več razdelkov, enega izbrišite, tako da bo možno ustvariti " "razširjen razdelek" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "I can't add any more partition" msgstr "Razdelkov ni več mogoče dodati" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All primary partitions are used" msgstr "Vsi primarni razdelki so uporabljeni" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Hard drive information" msgstr "Prepoznavanje trdega diska" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Auto allocate" msgstr "Samodejno dodeljevanje" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Clear all" msgstr "Izbriši vse" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "Želite preizkusiti nastavitev?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without writing the partition table?" msgstr "Zapri brez zapisovanja razdelitvene tabele?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without saving" msgstr "Zapri brez zapisovanja sprememb" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Continue anyway?" msgstr "Naj nadaljujem?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to expert mode" msgstr "Spremeni v napredni način" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to normal mode" msgstr "Spremeni v normalen način" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Undo" msgstr "Razveljavi" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Exit" msgstr "Ext2" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Choose a partition" msgstr "Izberite akcijo" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Choose another partition" msgstr "Ustvarjanje novega razdelka" #: ../../diskdrake/removable.pm:1 #, fuzzy, c-format msgid "Change type" msgstr "Spremeni tip razdelka" #: ../../diskdrake/smbnfs_gtk.pm:1 #, fuzzy, c-format msgid "Search servers" msgstr "Izberite strežnik" #: ../../diskdrake/smbnfs_gtk.pm:1 #, fuzzy, c-format msgid "Domain" msgstr "Nastavitve modula:" #: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Username" msgstr "Uporabniško ime" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Domain Authentication Required" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, fuzzy, c-format msgid "Another one" msgstr "Nastavitev zaslona" #: ../../diskdrake/smbnfs_gtk.pm:1 #, fuzzy, c-format msgid "Which username" msgstr "Uporabniško ime" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Can't login using username %s (bad password?)" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "cpu # " msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "SMBus controllers" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "USB controllers" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "SCSI controllers" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Firewire controllers" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "(E)IDE/ATA controllers" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Joystick" msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Scanner" msgstr "Izberite grafično kartico" #: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Unknown/Others" msgstr "Splošno" #: ../../harddrake/data.pm:1 #, c-format msgid "Bridges and system controllers" msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Modem" msgstr "Premakni" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Ethernetcard" msgstr "Nastavitev zaslona" #: ../../harddrake/data.pm:1 #, c-format msgid "Processors" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Webcam" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Soundcard" msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Other MultiMedia devices" msgstr "Drugo" #: ../../harddrake/data.pm:1 #, c-format msgid "Tvcard" msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Videocard" msgstr "Grafični način" #: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Tape" msgstr "Tip" #: ../../harddrake/data.pm:1 #, c-format msgid "DVD-ROM" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "CD/DVD burners" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "CDROM" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Disk" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Zip" msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Floppy" msgstr "Shrani na disketo" #: ../../harddrake/sound.pm:1 #, c-format msgid "Let me pick any driver" msgstr "" #: ../../harddrake/sound.pm:1 #, fuzzy, c-format msgid "Driver:" msgstr "Izberite strežnik" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Choosing an arbitratry driver" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Sound trouble shooting" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Unkown driver" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "No known driver" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "No open source driver" msgstr "" #: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Please Wait... Applying the configuration" msgstr "Preizkus nastavitev" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver'll only be used on next bootstrap." msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Trouble shooting" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independant " "sound API (it's available on most unices systems) but it's a very basic and " "limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" #: ../../harddrake/sound.pm:1 #, fuzzy, c-format msgid "Sound configuration" msgstr "Nastavitev zaslona" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "No alternative driver" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "enable radio support" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Radio support:" msgstr "" #: ../../harddrake/v4l.pm:1 #, fuzzy, c-format msgid "PLL setting:" msgstr "Formatiranje" #: ../../harddrake/v4l.pm:1 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Number of capture buffers:" msgstr "" #: ../../harddrake/v4l.pm:1 #, fuzzy, c-format msgid "Tuner type:" msgstr "Spremeni tip razdelka" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Card model:" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" #: ../../harddrake/v4l.pm:1 #, fuzzy, c-format msgid "Unknown|Generic" msgstr "Splošno" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "" #: ../../harddrake/v4l.pm:1 #, fuzzy, c-format msgid "Auto-detect" msgstr "Odstrani vnos" #: ../../interactive/newt.pm:1 #, fuzzy, c-format msgid "Do" msgstr "Končano" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (default %s) " msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "Bad choice, try again\n" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "Re-submit" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid " enter `void' for void entry" msgstr "" #: ../../interactive/stdio.pm:1 #, fuzzy, c-format msgid "Do you want to click on this button?" msgstr "Ali želite zdaj zagnati ,X -probeonly`?" #: ../../interactive/stdio.pm:1 #, fuzzy, c-format msgid "Button `%s': %s" msgstr "Možnosti: %s" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "Nalaganje modula %s je bilo neuspešno.\n" "Želite poskusiti znova z drugimi parametri?" #: ../../modules/interactive.pm:1 #, c-format msgid "Specify options" msgstr "Navedite nastavitve" #: ../../modules/interactive.pm:1 #, c-format msgid "Autoprobe" msgstr "Samodejna zaznava" #: ../../modules/interactive.pm:1 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "V nekaterih primerih potrebuje gonilnik %s za pravilno delovanje dodatne\n" " informacije. Lahko se zgodi, da deluje normalno tudi brez. Želite navesti\n" "dodatne nastavitve zanj ali dovolite gonilniku da poskusi pridobiti " "potrebne\n" "informacije samodejno? Lahko se zgodi, da se računalnik nepredvidoma " "ustavi,\n" "kar pa naj ne bi povzročilo nobene škode." #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../modules/interactive.pm:1 #, c-format msgid "Which %s driver should I try?" msgstr "Kateri %s gonilnik naj poizkusim?" #: ../../modules/interactive.pm:1 #, c-format msgid "Module options:" msgstr "Nastavitve modula:" #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "Sedaj lahko posredujete nastavitve za modul %s.\n" "Nastavitve so oblike ``ime=vrednost ime2=vrednost2 ...''.\n" "Na primer: ``io=0x300 irq=7''" #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "(module %s)" msgstr "(modul %s)" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../modules/interactive.pm:1 #, c-format msgid "Installing driver for %s card %s" msgstr "Namestitev gonilnika za %s kartico %s" #: ../../modules/interactive.pm:1 #, c-format msgid "See hardware info" msgstr "Glejte informacije o strojni opremi" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have any %s interfaces?" msgstr "Imate vmesnike %s?" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have another one?" msgstr "Imate še kakšnega?" #: ../../modules/interactive.pm:1 #, c-format msgid "Found %s %s interfaces" msgstr "Najdenih %s %s vmesnikov" #: ../../modules/interactive.pm:1 #, c-format msgid "You can configure each parameter of the module here." msgstr "" #: ../../modules/parameters.pm:1 #, fuzzy, c-format msgid "comma separated strings" msgstr "Formatiranje razdelkov" #: ../../modules/parameters.pm:1 #, c-format msgid "comma separated numbers" msgstr "" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated strings" msgstr "" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated numbers" msgstr "" #: ../../modules/parameters.pm:1 #, c-format msgid "a number" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "" "You need the alcatel microcode.\n" "Download it at\n" "http://www.speedtouchdsl.com/dvrreg_lx.htm\n" "and copy the mgmt.o in /usr/share/speedtouch" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" #: ../../network/adsl.pm:1 ../../network/ethernet.pm:1 #, fuzzy, c-format msgid "Connect to the Internet" msgstr "Kateri frekvenčni čip (ang. clockchip) imate?" #: ../../network/adsl.pm:1 #, c-format msgid "Sagem (using pppoa) usb" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "Alcatel speedtouch usb" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "use dhcp" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "use pptp" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "use pppoe" msgstr "" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Other ports" msgstr "Drugo" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Everything (no firewall)" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535." msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp.\n" "Have a look at /etc/services for information." msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrake Linux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "No network card" msgstr "Tabela" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "POP and IMAP Server" msgstr "Izberite strežnik" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Mail Server" msgstr "Izberite strežnik" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Domain Name Server" msgstr "Izberite strežnik" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Web Server" msgstr "strežnik" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Host name" msgstr "" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, fuzzy, c-format msgid "Zeroconf Host name" msgstr "Izberite strežnik" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "" "\n" "\n" "Enter a Zeroconf host name without any dot if you don't\n" "want to use the default host name." msgstr "" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, fuzzy, c-format msgid "Configuring network" msgstr "Nastavitev zaslona" #: ../../network/ethernet.pm:1 #, fuzzy, c-format msgid "" "Please choose which network adapter you want to use to connect to Internet." msgstr "Kateri strežnik potrebujete?" #: ../../network/ethernet.pm:1 ../../standalone/drakgw:1 #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Choose the network interface" msgstr "Izberite kartico" #: ../../network/ethernet.pm:1 #, c-format msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" #: ../../network/ethernet.pm:1 #, fuzzy, c-format msgid "" "Which dhcp client do you want to use?\n" "Default is dhcp-client." msgstr "Kateri strežnik potrebujete?" #: ../../network/isdn.pm:1 #, c-format msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "" "I have detected an ISDN PCI card, but I don't know its type. Please select a " "PCI card on the next screen." msgstr "" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "Which of the following is your ISDN card?" msgstr "Kateri strežnik potrebujete?" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "ISDN Configuration" msgstr "Nastavitev zaslona" #: ../../network/isdn.pm:1 #, c-format msgid "Abort" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "Continue" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "I don't know" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "PCI" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "ISA / PCMCIA" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "What kind of card do you have?" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "Found \"%s\" interface do you want to use it ?" msgstr "" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "Which protocol do you want to use?" msgstr "Kateri strežnik potrebujete?" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "Protocol for the rest of the world" msgstr "Preizkus nastavitev" #: ../../network/isdn.pm:1 #, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "European protocol" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "European protocol (EDSS1)" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "" "Select your provider.\n" "If it isn't listed, choose Unlisted." msgstr "" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "External ISDN modem" msgstr "Napredni način" #: ../../network/isdn.pm:1 #, c-format msgid "Internal ISDN card" msgstr "" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "What kind is your ISDN connection?" msgstr "Kateri strežnik potrebujete?" #: ../../network/isdn.pm:1 ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Network Configuration Wizard" msgstr "Nastavitev zaslona" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "Old configuration (isdn4net)" msgstr "Nastavitev zaslona" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "New configuration (isdn-light)" msgstr "Nastavitev zaslona" #: ../../network/isdn.pm:1 #, c-format msgid "" "Which ISDN configuration do you prefer?\n" "\n" "* The Old configuration uses isdn4net. It contains powerful\n" " tools, but is tricky to configure, and not standard.\n" "\n" "* The New configuration is easier to understand, more\n" " standard, but with less tools.\n" "\n" "We recommand the light configuration.\n" msgstr "" #: ../../network/modem.pm:1 #, fuzzy, c-format msgid "Do nothing" msgstr "neujemanje" #: ../../network/modem.pm:1 #, fuzzy, c-format msgid "Install rpm" msgstr "Namestiti" #: ../../network/modem.pm:1 #, c-format msgid "" "\"%s\" based winmodem detected, do you want to install needed software ?" msgstr "" #: ../../network/modem.pm:1 #, fuzzy, c-format msgid "Title" msgstr "Tabela" #: ../../network/modem.pm:1 #, c-format msgid "" "Your modem isn't supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Second DNS Server (optional)" msgstr "Izberite strežnik" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "First DNS Server (optional)" msgstr "Izberite strežnik" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Domain name" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "CHAP" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Script-based" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Terminal-based" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "PAP" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Login ID" msgstr "Nastavitev zaslona" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Phone number" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Connection name" msgstr "Nastavitev zaslona" #: ../../network/modem.pm:1 #, fuzzy, c-format msgid "Dialup options" msgstr "Izberite strežnik" #: ../../network/modem.pm:1 #, fuzzy, c-format msgid "Please choose which serial port your modem is connected to." msgstr "Kateri strežnik potrebujete?" #: ../../network/netconnect.pm:1 ../../network/tools.pm:1 #, fuzzy, c-format msgid "Network Configuration" msgstr "Nastavitev zaslona" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Problems occured during configuration.\n" "Test your connection via net_monitor or mcc. If your connection doesn't " "work, you might want to relaunch the configuration." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "The configuration will now be applied to your system.\n" "\n" msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "Želite preizkusiti nastavitev?" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "The network needs to be restarted. Do you want to restart it ?" msgstr "Izberite pakete, ki jih želite namestiti" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Network configuration" msgstr "Nastavitev zaslona" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Do you want to start the connection at boot?" msgstr "Ali želite zdaj zagnati ,X -probeonly`?" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Internet connection" msgstr "Izberite strežnik" #: ../../network/netconnect.pm:1 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Choose the connection you want to configure" msgstr "Ali želite zdaj zagnati ,X -probeonly`?" #: ../../network/netconnect.pm:1 #, c-format msgid "ethernet card(s) detected" msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "LAN connection" msgstr "Izberite strežnik" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "cable connection detected" msgstr "Izberite strežnik" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Cable connection" msgstr "Izberite strežnik" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "detected" msgstr "Odstrani vnos" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "ADSL connection" msgstr "Izberite strežnik" #: ../../network/netconnect.pm:1 #, c-format msgid "detected %s" msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "ISDN connection" msgstr "Izberite strežnik" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Winmodem connection" msgstr "Nastavitev RAMDAC" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "detected on port %s" msgstr "Podvojena točka priklopa %s" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Normal modem connection" msgstr "Nastavitev RAMDAC" #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Detecting devices..." msgstr "" #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 #, c-format msgid "Expert Mode" msgstr "Napredni način" #: ../../network/netconnect.pm:1 #, c-format msgid "Use auto detection" msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Choose the profile to configure" msgstr "Izberite privzetega uporabnika:" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Welcome to The Network Configuration Wizard.\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "" "\n" "\n" "\n" "We are now going to configure the %s connection.\n" "\n" "\n" "Press OK to continue." msgstr "Nastavitev RAMDAC" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "We are now going to configure the %s connection." msgstr "Nastavitev RAMDAC" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Internet connection & configuration" msgstr "Izberite strežnik" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Configure the connection" msgstr "Nastavitev omrežja" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Disconnect" msgstr "Izberite strežnik" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Connect" msgstr "Nastavitev zaslona" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "" "\n" "You can reconfigure your connection." msgstr "Nastavitev RAMDAC" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "" "\n" "You can connect to the Internet or reconfigure your connection." msgstr "Nastavitev zaslona" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "You are not currently connected to the Internet." msgstr "Kateri frekvenčni čip (ang. clockchip) imate?" #: ../../network/netconnect.pm:1 #, c-format msgid "" "\n" "You can disconnect or reconfigure your connection." msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "You are currently connected to the Internet." msgstr "Kateri frekvenčni čip (ang. clockchip) imate?" #: ../../network/network.pm:1 #, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Proxy should be http://..." msgstr "" #: ../../network/network.pm:1 #, c-format msgid "FTP proxy" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "HTTP proxy" msgstr "" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "Proxies configuration" msgstr "Nastavitev zaslona" #: ../../network/network.pm:1 #, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "Gateway device" msgstr "Zagonska naprava" #: ../../network/network.pm:1 #, c-format msgid "Gateway (e.g. %s)" msgstr "" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "DNS server" msgstr "Izberite strežnik" #: ../../network/network.pm:1 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" #: ../../network/network.pm:1 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" #: ../../network/network.pm:1 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "Start at boot" msgstr "Ustvarjanje zagonske diskete" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "Assign host name from DHCP address" msgstr "Preizkusite miško" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "Network Hotplugging" msgstr "Nastavitev zaslona" #: ../../network/network.pm:1 #, c-format msgid "Track network card id (useful for laptops)" msgstr "" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "DHCP host name" msgstr "Izberite strežnik" #: ../../network/network.pm:1 ../../standalone/drakconnect:1 #: ../../standalone/drakgw:1 #, c-format msgid "Netmask" msgstr "" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakconnect:1 #, c-format msgid "IP address" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "(bootp/dhcp/zeroconf)" msgstr "" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "Automatic IP" msgstr "Prilagojeno" #: ../../network/network.pm:1 #, fuzzy, c-format msgid " (driver %s)" msgstr "Gonilnik XFree86: %s\n" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "Configuring network device %s" msgstr "Nastavitev RAMDAC" #: ../../network/network.pm:1 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" #: ../../network/network.pm:1 #, c-format msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" #: ../../network/shorewall.pm:1 #, c-format msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fixes after installation." msgstr "" #: ../../network/shorewall.pm:1 #, fuzzy, c-format msgid "Firewalling configuration detected!" msgstr "Nastavitev zaslona" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Password" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Login (user name)" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Connection timeout (in sec)" msgstr "Nastavitev zaslona" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Connection speed" msgstr "Nastavitev zaslona" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Dialing mode" msgstr "" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "Choose your country" msgstr "Izberite tipkovnico" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Provider dns 2 (optional)" msgstr "Izberite strežnik" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Provider dns 1 (optional)" msgstr "Izberite strežnik" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider phone number" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider name (ex provider.net)" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Your personal phone number" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_1" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_0" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card mem (DMA)" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IRQ" msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Please fill or check the field below" msgstr "" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "Connection Configuration" msgstr "Nastavitev zaslona" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "" "The system doesn't seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "Nastavitev zaslona" #: ../../network/tools.pm:1 #, c-format msgid "For security reasons, it will be disconnected now." msgstr "" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "The system is now connected to the Internet." msgstr "Kateri frekvenčni čip (ang. clockchip) imate?" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Testing your connection..." msgstr "Nastavitev RAMDAC" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "Xconfigurator bo zdaj zagnal X in preveril nastavitve." #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "Internet configuration" msgstr "Nastavitev zaslona" #: ../../partition_table/raw.pm:1 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" #: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " (Default)" msgstr " (Privzeto)" #: ../../printer/cups.pm:1 #, fuzzy, c-format msgid "On CUPS server \"%s\"" msgstr "Izberite strežnik" #: ../../printer/cups.pm:1 ../../printer/main.pm:1 #, fuzzy, c-format msgid "Remote Printers" msgstr "Odstrani vnos" #: ../../printer/cups.pm:1 ../../printer/data.pm:1 #, c-format msgid "CUPS" msgstr "" #: ../../printer/cups.pm:1 #, c-format msgid "(on this machine)" msgstr "" #: ../../printer/cups.pm:1 #, fuzzy, c-format msgid "(on %s)" msgstr "(modul %s)" #: ../../printer/data.pm:1 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "LPRng" msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "LPRng - LPR New Generation" msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "LPD" msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "LPD - Line Printer Daemon" msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "PDQ" msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "PDQ - Print, Don't Queue" msgstr "" #: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Unknown Model" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Unknown model" msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "%s (Port %s)" msgstr "Formatiraj" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Host %s" msgstr "Izberite strežnik" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Network %s" msgstr "Tabela" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Interface \"%s\"" msgstr "Nastavitev zaslona" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Local network(s)" msgstr "Tabela" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Raw printer (No driver)" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", using command %s" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid ", printing to %s" msgstr "razdelek %s" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on HP JetDirect" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on USB" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on parallel port \\#%s" msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid ", USB printer" msgstr "Odstrani vnos" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid ", USB printer \\#%s" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " on parallel port \\#%s" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Local Printers" msgstr "Tiskalnik" #: ../../printer/main.pm:1 #, c-format msgid "Pipe job into a command" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Enter a printer device URI" msgstr "Izberite strežnik" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Printer on NetWare server" msgstr "Izberite strežnik" #: ../../printer/main.pm:1 #, c-format msgid "Printer on SMB/Windows 95/98/NT server" msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Network printer (TCP/Socket)" msgstr "Izberite strežnik" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer on remote lpd server" msgstr "Izberite strežnik" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Printer on remote CUPS server" msgstr "Izberite strežnik" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Remote printer" msgstr "Odstrani vnos" #: ../../printer/main.pm:1 #, c-format msgid "Local printer" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Configuring applications..." msgstr "Nastavitev tiskalnika" #: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Printerdrake" msgstr "Tiskalnik" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Removing printer \"%s\"..." msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "Želite preizkusiti nastavitev?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remove printer" msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Learn how to use this printer" msgstr "Želite preizkusiti nastavitev?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Print test pages" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" "GIMP." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing printer from Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Adding printer to Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add this printer to Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Default printer" msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Set this printer as the default" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer options" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model, driver" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Removing old printer \"%s\"..." msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer name, description, location" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer connection type" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Raw printer" msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do it!" msgstr "" #: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 #: ../../standalone/drakfont:1 ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Close" msgstr "Premakni" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "Printer %s\n" "What do you want to modify on this printer?" msgstr "Želite preizkusiti nastavitev?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Modify printer configuration" msgstr "Nastavitev zaslona" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Add a new printer" msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "Normal Mode" msgstr "Običajni DAC" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Change the printing system" msgstr "Nastavitev omrežja" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer sharing" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "CUPS configuration" msgstr "Nastavitev zaslona" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Display all available remote CUPS printers" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it." msgstr "" "Tukaj so različni vnosi.\n" "Lahko dodate še kakšnega ali spremenite obstoječega" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing system: " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking installed software..." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing Foomatic..." msgstr "Nameščanje paketa %s" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Failed to configure printer \"%s\"!" msgstr "Nastavitev tiskalnika" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Configuring printer \"%s\"..." msgstr "Nastavitev tiskalnika" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Reading printer data..." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "Kateri strežnik potrebujete?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Select Printer Spooler" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Setting Default Printer..." msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing %s ..." msgstr "Nameščanje paketa %s" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Removing %s ..." msgstr "Ločljivost: %s\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Starting the printing system at boot time" msgstr "Kateri strežnik potrebujete?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessable by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing a printing system in the %s security level" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "paranoid" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "high" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Restarting printing system..." msgstr "Kateri strežnik potrebujete?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuration of a remote printer" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network is accessable after booting your " "system and correct the configuration using the Mandrake Control Center, " "section \"Network & Internet\"/\"Connection\", and afterwards set up the " "printer, also using the Mandrake Control Center, section \"Hardware\"/" "\"Printer\"" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Configure the network now" msgstr "Nastavitev omrežja" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Go on without configuring the network" msgstr "Nastavitev zaslona" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Network functionality not configured" msgstr "Monitor ni nastavljen" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Starting network..." msgstr "Nastavitev RAMDAC" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Refreshing printer data..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Transfer printer configuration" msgstr "Nastavitev zaslona" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transferring %s..." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "New printer name" msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transfer" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do not transfer printers" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "LPD and LPRng do not support IPP printers.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing test page(s)..." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Print option list" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printing on the printer \"%s\"" msgstr "Izklop omrežja" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "Izklop omrežja" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printing/Scanning on \"%s\"" msgstr "Izklop omrežja" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "Izklop omrežja" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s\n" "\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Did it work properly?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Do not print any test page" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Photo test page" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Alternative test page (A4)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Alternative test page (Letter)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Standard test page" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Print" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "No test pages" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Test pages" msgstr "Testiraj ponovno" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "Xconfigurator bo zdaj zagnal X in preveril nastavitve." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s out of range!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be a number!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be an integer number!" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer default settings" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your printer belongs to the group of GDI laser printers (winprinters) sold " "by different manufacturers which uses the Zenographics ZJ-stream raster " "format for the data sent to the printer. The driver for these printers is " "still in a very early development stage and so it will perhaps not always " "work properly. Especially it is possible that the printer only works when " "you choose the A4 paper size.\n" "\n" "Some of these printers, as the HP LaserJet 1000, for which this driver was " "originally created, need their firmware to be uploaded to them after they " "are turned on. In the case of the HP LaserJet 1000 you have to search the " "printer's Windows driver CD or your Windows partition for the file " "\"sihp1000.img\" and upload the file to the printer with one of the " "following commands:\n" "\n" " lpr -o raw sihp1000.img\n" " cat sihp1000.img > /dev/usb/lp0\n" "\n" "The first command can be given by any normal user, the second must be given " "as root. After having done so you can print normally.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Lexmark inkjet configuration" msgstr "Nastavitev zaslona" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "OKI winprinter configuration" msgstr "Nastavitev zaslona" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Find the correct model in the list when a wrong model or " "\"Raw printer\" is highlighted." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Which printer model do you have?" msgstr "Kateri tip razdelka želite?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer model selection" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Reading printer database..." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Select model manually" msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The model is correct" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Your printer model" msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Preparing printer database..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Location" msgstr "" #: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Description" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter Printer Name and Comments" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Making printer port available for CUPS..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Scanning on your HP multi-function device" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing mtools packages..." msgstr "Nameščanje paketa %s" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing SANE packages..." msgstr "Nameščanje paketa %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking device and configuring HPOJ..." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing HPOJ package..." msgstr "Nameščanje paketa %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP " "PhotoSmart or an HP LaserJet 2200?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "A command line must be entered!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Command line" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here you can specify any arbitrary command line into which the job should be " "piped instead of being sent directly to a printer." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Pipe into command" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Detected model: %s %s" msgstr "Podvojena točka priklopa %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "A valid URI must be entered!" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer Device URI" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" #: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Port" msgstr "Formatiraj" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer host name or IP" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The port number should be an integer!" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer host name or IP missing!" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) in the input fields." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "TCP/Socket Printer Options" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Host \"%s\", port %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", host \"%s\", port %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Scanning network..." msgstr "Nastavitev RAMDAC" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer auto-detection" msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP queue name missing!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP server name missing!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print Queue Name" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer Server" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NetWare Printer Options" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SECURITY WARNING!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Samba share name missing!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Auto-detected" msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Workgroup" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Share name" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "SMB server IP" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "SMB server host" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "Izklop omrežja" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remote printer name missing!" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote host name missing!" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remote printer name" msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remote host name" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote lpd Printer Options" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Manual configuration" msgstr "Nastavitev zaslona" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "You must choose/enter a printer/device!" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Please choose the port that your printer is connected to." msgstr "Kateri strežnik potrebujete?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the port that your printer is connected to or enter a device " "name/file name in the input line" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "Kateri strežnik potrebujete?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer you want to set up. The configuration of the " "printer will work fully automatically. If your printer was not correctly " "detected or if you prefer a customized printer configuration, turn on " "\"Manual configuration\"." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Currently, no alternative possibility is available" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The configuration of the printer will work fully automatically. If your " "printer was not correctly detected or if you prefer a customized printer " "configuration, turn on \"Manual configuration\"." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "The following printer was auto-detected. " msgstr "Kateri frekvenčni čip (ang. clockchip) imate?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer to which the print jobs should go or enter a " "device name/file name in the input line" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer you want to set up or enter a device name/file " "name in the input line" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Alternatively, you can specify a device name/file name in the input line" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "If it is not the one you want to configure, enter a device name/file name in " "the input line" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Available printers" msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "No printer found!" msgstr "Tiskalnik" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "You must enter a device or file name!" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Local Printer" msgstr "Tiskalnik" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "USB printer \\#%s" msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer on parallel port \\#%s" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Network printer \"%s\", port %s" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Detected %s" msgstr "Podvojena točka priklopa %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", network printer \"%s\", port %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the Mandrake Control " "Center." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Auto-detect printers connected to this machine" msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you don't need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) and your Windows machines must be connected and " "turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you don't need " "it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please " "choose the correct model from the list." msgstr "" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, c-format msgid ")" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid " on " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "(" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Configuring printer ..." msgstr "Nastavitev tiskalnika" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Searching for new printers..." msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "Ali želite zdaj zagnati ,X -probeonly`?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Do you want to enable printing on printers in the local network?\n" msgstr "Xconfigurator bo zdaj zagnal X in preveril nastavitve." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid " (Make sure that all your printers are connected and turned on).\n" msgstr "Kateri strežnik potrebujete?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "There are no printers found which are directly connected to your machine" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "Kateri frekvenčni čip (ang. clockchip) imate?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "Kateri frekvenčni čip (ang. clockchip) imate?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "Kateri frekvenčni čip (ang. clockchip) imate?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "and %d unknown printers" msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "and one unknown printer" msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Checking your system..." msgstr "Kateri strežnik potrebujete?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Restarting CUPS..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "This server is already in the list, it cannot be added again.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Examples for correct IPs:\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The entered IP is not correct.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Server IP missing!" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Accessing printers on remote CUPS servers" msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remove selected server" msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Edit selected server" msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Add server" msgstr "Dodaj uporabnika" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Add here the CUPS servers whose printers you want to use. You only need to " "do this if the servers do not broadcast their printer information into the " "local network." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "IP address of host/network:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The entered host/network IP is not correct.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Host/network IP address missing." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Choose the network or host on which the local printers should be made " "available:" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Sharing of local printers" msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remove selected host/network" msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Edit selected host/network" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add host/network" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "These are the machines and networks on which the locally connected printer" "(s) should be available:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically " "made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" " "as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, " "but then you have to take care of these points." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Automatic correction of CUPS configuration" msgstr "Nastavitev zagonskega stila" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To get access to printers on remote CUPS servers in your local network you " "only need to turn on the \"Automatically find available printers on remote " "machines\" option; the CUPS servers inform your machine automatically about " "their printers. All printers currently known to your machine are listed in " "the \"Remote printers\" section in the main window of Printerdrake. If your " "CUPS server(s) is/are not in your local network, you have to enter the IP " "address(es) and optionally the port number(s) here to get the printer " "information from the server(s)." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "None" msgstr "Končano" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Additional CUPS servers: " msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "No remote machines" msgstr "Odstrani vnos" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Custom configuration" msgstr "Nastavitev zaslona" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer sharing on hosts/networks: " msgstr "Izberite strežnik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Automatically find available printers on remote machines" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printers on this machine are available to other computers" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can also decide here whether printers on remote machines should be " "automatically made available on this machine." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here you can choose whether the printers connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "CUPS printer sharing configuration" msgstr "Nastavitev zaslona" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these " "printers will be automatically detected." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "How is the printer connected?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select Printer Connection" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (umask)\n" "\n" "Set the user umask." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (val)\n" "\n" "Set the shell timeout. A value of zero means no timeout." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (size)\n" "\n" "Set shell commands history size. A value of -1 means unlimited." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check open ports." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result by mail." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, reports check result to tty." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result to syslog." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "if set to yes, check for empty passwords, for no password in /etc/shadow and " "for users with the 0 id other than root." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run the daily security checks." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report unowned files." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (umask)\n" "\n" "Set the root umask." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (length, ndigits=0, nupper=0)\n" "\n" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Set the password history length to prevent password reuse." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (max, inactive=-1)\n" "\n" "Set password aging to \\fImax\\fP days and delay to change to \\fIinactive" "\\fP." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (name)\n" "\n" "Add the name as an exception to the handling of password aging by msec." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" " Enable/Disable sulogin(8) in single user level." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" " Activate/Disable daily security check." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Activate/Disable ethernet cards promiscuity check." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Use password to authenticate users." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" " Enabling su only from members of the wheel group or allow su from any user." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Enable/Disable msec hourly security check." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Enable/Disable the logging of IPv4 strange packets." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Enable/Disable libsafe if libsafe is found on the system." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg, alert=1)\n" "\n" "Enable/Disable IP spoofing protection." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg, alert=1)\n" "\n" "Enable/Disable name resolution spoofing protection. If\n" "\\fIalert\\fP is true, also reports to syslog." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg, expr='*.*', dev='tty12')\n" "\n" "Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n" "expression describing what to log (see syslog.conf(5) for more details) and\n" "dev the device to report the log." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Enable/Disable crontab and at for users. Put allowed users in /etc/cron." "allow and /etc/at.allow\n" "(see man at(1) and crontab(1))." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: ()\n" "\n" "If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n" "in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/" "server\n" "to point to /etc/security/msec/server.. The /etc/security/msec/" "server\n" "is used by chkconfig --add to decide to add a service if it is present in " "the file\n" "during the installation of packages." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if " "\\fIarg\\fP = ALL. Only local ones\n" "if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the " "services you need, use /etc/hosts.allow\n" "(see hosts.allow(5))." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "The argument specifies if clients are authorized to connect\n" "to the X server on the tcp port 6000 or not." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg, listen_tcp=None)\n" "\n" "Allow/Forbid X connections. First arg specifies what is done\n" "on the client side: ALL (all connections are allowed), LOCAL (only\n" "local connection) and NONE (no connection)." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Allow/Forbid direct root login." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Allow/Forbid remote root login." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Allow/Forbid reboot by the console user." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg" "\\fP = NONE no issues are\n" "allowed else only /etc/issue is allowed." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Allow/Forbid autologin." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" " Accept/Refuse icmp echo." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" " Accept/Refuse broadcasted icmp echo." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Accept/Refuse bogus IPv4 error messages." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Security Administrator (login or email)" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "Use libsafe for servers" msgstr "Izberite nastavitve strežnika" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "Security level" msgstr "Privzeto" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "Please choose the desired security level" msgstr "Ali želite sedaj zagnati ,X -probeonly`?" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "DrakSec Basic Options" msgstr "Možnosti" #: ../../security/level.pm:1 #, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Paranoid" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Higher" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "High" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Poor" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Welcome To Crackers" msgstr "" #: ../../share/advertising/01-thanks.pl:1 #, c-format msgid "" "The success of MandrakeSoft is based upon the principle of Free Software. " "Your new operating system is the result of collaborative work of the " "worldwide Linux Community." msgstr "" #: ../../share/advertising/01-thanks.pl:1 #, c-format msgid "Welcome to the Open Source world." msgstr "" #: ../../share/advertising/01-thanks.pl:1 #, c-format msgid "Thank you for choosing Mandrake Linux 9.1" msgstr "" #: ../../share/advertising/02-community.pl:1 #, c-format msgid "" "To share your own knowledge and help build Linux software, join our " "discussion forums on our \"Community\" webpages." msgstr "" #: ../../share/advertising/02-community.pl:1 #, c-format msgid "" "Want to know more and to contribute to the Open Source community? Get " "involved in the Free Software world!" msgstr "" #: ../../share/advertising/02-community.pl:1 #, c-format msgid "Build the future of Linux!" msgstr "" #: ../../share/advertising/03-software.pl:1 #, c-format msgid "" "And, of course, push multimedia to its limits with the very latest software " "to play videos, audio files and to handle your images or photos." msgstr "" #: ../../share/advertising/03-software.pl:1 #, c-format msgid "" "Surf the Web with Mozilla or Konqueror, read your mail with Evolution or " "Kmail, create your documents with OpenOffice.org." msgstr "" #: ../../share/advertising/03-software.pl:1 #, c-format msgid "MandrakeSoft has selected the best software for you" msgstr "" #: ../../share/advertising/04-configuration.pl:1 #, c-format msgid "" "Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful " "tool to fully adapt your computer to the use you make of it. Configure and " "customize elements such as the security level, the peripherals (screen, " "mouse, keyboard...), the Internet connection and much more!" msgstr "" #: ../../share/advertising/04-configuration.pl:1 #, fuzzy, c-format msgid "Mandrake's multipurpose configuration tool" msgstr "Nastavitev zaslona" #: ../../share/advertising/05-desktop.pl:1 #, c-format msgid "" "Perfectly adapt your computer to your needs thanks to the 11 available " "Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME " "2.2, Window Maker, ..." msgstr "" #: ../../share/advertising/05-desktop.pl:1 #, c-format msgid "A customizable environment" msgstr "" #: ../../share/advertising/06-development.pl:1 #, c-format msgid "" "To modify and to create in different languages such as Perl, Python, C and C+" "+ has never been so easy thanks to GNU gcc 3 and the best Open Source " "development environments." msgstr "" #: ../../share/advertising/06-development.pl:1 #, c-format msgid "Mandrake Linux 9.1: the ultimate development platform" msgstr "" #: ../../share/advertising/07-server.pl:1 #, c-format msgid "" "Transform your computer into a powerful Linux server: Web server, mail, " "firewall, router, file and print server (etc.) are just a few clicks away!" msgstr "" #: ../../share/advertising/07-server.pl:1 #, c-format msgid "Turn your computer into a reliable server" msgstr "" #: ../../share/advertising/08-store.pl:1 #, c-format msgid "" "Our full range of Linux solutions, as well as special offers on products and " "other \"goodies\", are available on our e-store:" msgstr "" #: ../../share/advertising/08-store.pl:1 #, c-format msgid "The official MandrakeSoft Store" msgstr "" #: ../../share/advertising/09-mdksecure.pl:1 #, c-format msgid "" "Enhance your computer performance with the help of a selection of partners " "offering professional solutions compatible with Mandrake Linux" msgstr "" #: ../../share/advertising/09-mdksecure.pl:1 #, c-format msgid "Get the best items with Mandrake Linux Strategic partners" msgstr "" #: ../../share/advertising/10-security.pl:1 #, c-format msgid "" "MandrakeSoft has designed exclusive tools to create the most secured Linux " "version ever: Draksec, a system security management tool, and a strong " "firewall are teamed up together in order to highly reduce hacking risks." msgstr "" #: ../../share/advertising/10-security.pl:1 #, c-format msgid "Optimize your security by using Mandrake Linux" msgstr "" #: ../../share/advertising/11-mnf.pl:1 #, c-format msgid "This product is available on the MandrakeStore Web site." msgstr "" #: ../../share/advertising/11-mnf.pl:1 #, c-format msgid "" "Complete your security setup with this very easy-to-use software which " "combines high performance components such as a firewall, a virtual private " "network (VPN) server and client, an intrusion detection system and a traffic " "manager." msgstr "" #: ../../share/advertising/11-mnf.pl:1 #, c-format msgid "Secure your networks with the Multi Network Firewall" msgstr "" #: ../../share/advertising/12-mdkexpert.pl:1 #, c-format msgid "" "Join the MandrakeSoft support teams and the Linux Community online to share " "your knowledge and help others by becoming a recognized Expert on the online " "technical support website:" msgstr "" #: ../../share/advertising/12-mdkexpert.pl:1 #, c-format msgid "" "Find the solutions of your problems via MandrakeSoft's online support " "platform." msgstr "" #: ../../share/advertising/12-mdkexpert.pl:1 #, fuzzy, c-format msgid "Become a MandrakeExpert" msgstr "Napredno" #: ../../share/advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "" "All incidents will be followed up by a single qualified MandrakeSoft " "technical expert." msgstr "" #: ../../share/advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "An online platform to respond to enterprise support needs." msgstr "" #: ../../share/advertising/13-mdkexpert_corporate.pl:1 #, fuzzy, c-format msgid "MandrakeExpert Corporate" msgstr "Napredno" #: ../../standalone/XFdrake:1 #, c-format msgid "Please relog into %s to activate the changes" msgstr "Za uveljavitev sprememb, se ponovno prijavite v %s" #: ../../standalone/XFdrake:1 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "Odjavite se in nato pritisnite Ctrl-Alt-BackSpace" #: ../../standalone/drakTermServ:1 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot ISO image is %s" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "No floppy drive available!" msgstr "Na voljno ni nobenega disketnega pogona" #: ../../standalone/drakTermServ:1 #, c-format msgid "Floppy can be removed now" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Couldn't access the floppy!" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Please insert floppy disk:" msgstr "Izberite strežnik" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Write Config" msgstr "Nastavitev X" #: ../../standalone/drakTermServ:1 #, c-format msgid "Dynamic IP Address Pool:" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "dhcpd Server Configuration" msgstr "Nastavitev zaslona" #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range End:" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range Start:" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Name Servers:" msgstr "Izberite strežnik" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Domain Name:" msgstr "Izberite strežnik" #: ../../standalone/drakTermServ:1 #, c-format msgid "Broadcast Address:" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet Mask:" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Routers:" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Netmask:" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet:" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "dhcpd Config..." msgstr "Nastavitev zaslona" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Delete Client" msgstr "Izbriši" #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Edit Client" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add Client -->" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Allow Thin Clients" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Thin Client" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "No net boot images created!" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "type: %s" msgstr "Tip:" #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Del User" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Add User -->" msgstr "Dodaj uporabnika" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Delete All NBIs" msgstr "Izberite datoteko" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "<-- Delete" msgstr "Izbriši" #: ../../standalone/drakTermServ:1 #, c-format msgid "This will take a few minutes." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build All Kernels -->" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "No NIC selected!" msgstr "Izberite strežnik" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Single NIC -->" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "No kernel selected!" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Whole Kernel -->" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot ISO" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot Floppy" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "drakTermServ Overview\n" "\t\t\t \n" " - Create Etherboot Enabled Boot Images:\n" " \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image " "must be created.\n" " \t\tmkinitrd-net does much of this work and drakTermServ is just a " "graphical interface\n" " \t\tto help manage/customize these images.\n" "\n" " - Maintain /etc/dhcpd.conf:\n" " \t\tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP address\n" " \t\tand net boot images to the machine. drakTermServ helps create/" "remove these entries.\n" "\t\t\t\n" " \t\t(PCI cards may omit the image - etherboot will request the " "correct image. You should\n" " \t\talso consider that when etherboot looks for the images, it " "expects names like\n" " \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \t\tA typical dhcpd.conf stanza to support a diskless client looks " "like:\n" " \t\t\n" "\t\t\t\thost curly {\n" "\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n" "\t\t\t\t\tfixed-address 192.168.192.3;\n" "\t\t\t\t\t#type fat;\n" "\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk." "nbi\";\n" "\t\t\t\t}\n" "\t\t\t\n" "\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific " "entry for\n" "\t\t\ta client machine, using a fixed address scheme facilitates using the " "functionality\n" "\t\t\tof client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" "\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can " "either be \"thin\"\n" "\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, " "while fat clients run most\n" "\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\" "$IP=client_ip\\$\\$ is\n" "\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are modified\n" "\t\t\tif thin clients are used, to enable xdmcp. Since there are security " "issues in using xdmcp,\n" "\t\t\thosts.deny and hosts.allow are modified to limit access to the local " "subnet.\n" "\t\t\t\n" "\t\t\tNote: You must stop/start the server after adding or changing " "clients.\n" "\t\t\t\n" " - Maintain /etc/exports:\n" " \t\tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \t\tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \t\tdiskless clients.\n" "\n" " \t\tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t\t/ (ro,all_squash)\n" " \t\t/home SUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" "\t\t\tWith SUBNET/MASK being defined for your network.\n" " \t\t\n" " - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n" " \t\tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$" "\\$. drakTermServ helps\n" " \t\tin this respect by adding or removing system users from this " "file.\n" "\n" " - Per client /etc/X11XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n" " \t\tThrough clusternfs, each diskless client can have it's own " "unique configuration files\n" " \t\ton the root filesystem of the server. In the future drakTermServ " "will help create these\n" " \t\tfiles.\n" "\n" " - Per client system configuration files:\n" " \t\tThrough clusternfs, each diskless client can have it's own " "unique configuration files\n" " \t\ton the root filesystem of the server. In the future, " "drakTermServ can help create files\n" " \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/" "keyboard on a per-client\n" " \t\tbasis.\n" "\n" " - /etc/xinetd.d/tftp:\n" " \t\tdrakTermServ will configure this file to work in conjunction " "with the images created by\n" " \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to each\n" " \t\tdiskless client.\n" "\n" " \t\tA typical tftp configuration file looks like:\n" " \t\t\n" " \t\tservice tftp\n" " \t\t(\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t\t}\n" " \t\t\n" " \t\tThe changes here from the default installation are changing the " "disable flag to\n" " \t\t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \t\tputs it's images.\n" "\n" " - Create etherboot floppies/CDs:\n" " \t\tThe diskless client machines need either ROM images on the NIC, " "or a boot floppy\n" " \t\tor CD to initate the boot sequence. drakTermServ will help " "generate these images,\n" " \t\tbased on the NIC in the client machine.\n" " \t\t\n" " \t\tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \t\tcat /usr/lib/etherboot/boot1a.bin \\\n" " \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n" " \n" "\n" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" "\n" " Thanks:\n" "\t- LTSP Project http://www.ltsp.org\n" "\t- Michael Brown \n" "\n" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" " Copyright (C) 2002 by MandrakeSoft \n" "\tStew Benedict sbenedict\\@mandrakesoft.com\n" "\n" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add/Del Clients" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Add/Del Users" msgstr "Dodaj uporabnika" #: ../../standalone/drakTermServ:1 #, c-format msgid "Net Boot Images" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot Floppy/ISO" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Stop Server" msgstr "Izberite strežnik" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Start Server" msgstr "Izberite strežnik" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Disable Server" msgstr "Izberite strežnik" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Enable Server" msgstr "Izberite strežnik" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Mandrake Terminal Server Configuration" msgstr "Nastavitev zaslona" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Remove the last item" msgstr "Formatiranje loopback datoteko %s" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Add an item" msgstr "Dodaj uporabnika" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Auto Install" msgstr "Namestiti" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" #: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1 #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Congratulations!" msgstr "Nastavitev zaslona" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Creating auto install floppy" msgstr "Priprava namestitbe" #: ../../standalone/drakautoinst:1 #, c-format msgid "manual" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Automatic Steps Configuration" msgstr "Nastavitev zagonskega stila" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "replay" msgstr "Naloži ponovno" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Do you want to continue?" msgstr "" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Auto Install Configurator" msgstr "Nastavitev zaslona" #: ../../standalone/drakautoinst:1 #, c-format msgid "I can't find needed image file `%s'." msgstr "" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Error!" msgstr "Napaka" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Restore Backup Problems:\n" "\n" "During the restore step, Drakbackup will verify all your\n" "backup files before restoring them.\n" "Before the restore, Drakbackup will remove \n" "your original directory, and you will loose all your \n" "data. It is important to be careful and not modify the \n" "backup data files by hand.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "options description:\n" "\n" "Please be careful when you are using ftp backup, because only \n" "backups that are already built are sent to the server.\n" "So at the moment, you need to build the backup on your hard \n" "drive before sending it to the server.\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Description:\n" "\n" " Drakbackup is used to backup your system.\n" " During the configuration you can select: \n" "\t- System files, \n" "\t- Users files, \n" "\t- Other files.\n" "\tor All your system ... and Other (like Windows Partitions)\n" "\n" " Drakbackup allows you to backup your system on:\n" "\t- Harddrive.\n" "\t- NFS.\n" "\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" "\t- FTP.\n" "\t- Rsync.\n" "\t- Webdav.\n" "\t- Tape.\n" "\n" " Drakbackup allows you to restore your system to\n" " a user selected directory.\n" "\n" " Per default all backups will be stored on your\n" " /var/lib/drakbackup directory\n" "\n" " Configuration file:\n" "\t/etc/drakconf/drakbackup/drakbackup.conf\n" "\n" "Restore Step:\n" " \n" " During the restore step, DrakBackup will remove \n" " your original directory and verify that all \n" " backup files are not corrupted. It is recommended \n" " you do a last backup before restoring.\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" " updates 2002 MandrakeSoft by Stew Benedict " msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" " Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien " msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "restore description:\n" " \n" "Only the most recent date will be used, because with incremental \n" "backups it is necessary to restore one by one each older backup.\n" "\n" "So if you don't want to restore a user please unselect all their\n" "check boxes.\n" "\n" "Otherwise, you are able to select only one of these.\n" "\n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful \n" "\toption to use. This option allows you to \n" "\tbackup all of your data the first time, and \n" "\tonly the changed data after.\n" "\tSo you will be able, during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this option all\n" "\told backups are deleted before each backup. \n" "\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "options description:\n" "\n" " - Backup system files:\n" " \n" "\tThis option allows you to backup your /etc directory,\n" "\twhich contains all configuration files. Please be\n" "\tcareful during the restore step to not overwrite:\n" "\t\t/etc/passwd \n" "\t\t/etc/group \n" "\t\t/etc/fstab\n" "\n" " - Backup User files: \n" "\n" "\tThis option allows you select all users that you want \n" "\tto backup.\n" "\tTo preserve disk space, it is recommended that you \n" "\tdo not include the web browser's cache.\n" "\n" " - Backup Other files: \n" "\n" "\tThis option allows you to add more data to save.\n" "\tWith the other backup it's not possible at the \n" "\tmoment to select incremental backup.\t\t\n" " \n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful \n" "\toption for backup. This option allows you \n" "\tto backup all your data the first time, and \n" "\tonly the changed data afterward.\n" "\tThen you will be able, during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this option all\n" "\told backups are deleted before each backup. \n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " Some errors during sendmail are caused by \n" " a bad configuration of postfix. To solve it you have to\n" " set myhostname or mydomain in /etc/postfix/main.cf\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "options description:\n" "\n" " In this step Drakbackup allow you to change:\n" "\n" " - The compression mode:\n" " \n" " If you check bzip2 compression, you will compress\n" " your data better than gzip (about 2-10 %%).\n" " This option is not checked by default because\n" " this compression mode needs more time (about 1000%% more).\n" " \n" " - The update mode:\n" "\n" " This option will update your backup, but this\n" " option is not really useful because you need to\n" " decompress your backup before you can update it.\n" " \n" " - the .backupignore mode:\n" "\n" " Like with cvs, Drakbackup will ignore all references\n" " included in .backupignore files in each directories.\n" " ex: \n" " #> cat .backupignore\n" " *.o\n" " *~\n" " ...\n" " \n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Drakbackup" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore" msgstr "Obnovi iz datoteke" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup Now" msgstr "Nastavitev datotečnega sistema" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Advanced Configuration" msgstr "Nastavitev zaslona" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Wizard Configuration" msgstr "Nastavitev zaslona" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "View Backup Configuration." msgstr "Nastavitev zaslona" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup Now from configuration file" msgstr "Nastavitev zaslona" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Drakbackup Configuration" msgstr "Nastavitev zaslona" #: ../../standalone/drakbackup:1 #, c-format msgid "Total Progress" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Sending files..." msgstr "Shrani v datoteko" #: ../../standalone/drakbackup:1 #, c-format msgid "files sending by FTP" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup other files" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup user files" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup system files" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Under Devel ... please wait." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "%s" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please select data to backup..." msgstr "Ali želite sedaj zagnati ,X -probeonly`?" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please select media for backup..." msgstr "Ali želite sedaj zagnati ,X -probeonly`?" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please select data to restore..." msgstr "Ali želite sedaj zagnati ,X -probeonly`?" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "The following packages need to be installed:\n" msgstr "Izberite kartico" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sending file via FTP.\n" " Please correct your FTP configuration." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sendmail.\n" " Your report mail was not sent.\n" " Please configure sendmail" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Next" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Previous" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakperm:1 #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Save" msgstr "Meni Start" #: ../../standalone/drakbackup:1 #, c-format msgid "Build Backup" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Progress" msgstr "Obnovi iz datoteke" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore From Catalog" msgstr "Reševanje razdelitvene tabele" #: ../../standalone/drakbackup:1 #, c-format msgid "Browse to new restore repository." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "CD in place - continue." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Custom Restore" msgstr "Prilagojeno" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore all backups" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Failed..." msgstr "Obnovi iz datoteke" #: ../../standalone/drakbackup:1 #, c-format msgid "Files Restored..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Path or Module required" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Hostname required" msgstr "Izberite strežnik" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Username required" msgstr "Uporabniško ime" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Password required" msgstr "Geslo" #: ../../standalone/drakbackup:1 #, c-format msgid "Host Path or Module" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Host Name" msgstr "Izberite strežnik" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Via Network" msgstr "Obnovi iz datoteke" #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore From Tape" msgstr "Reševanje razdelitvene tabele" #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore From CD" msgstr "Obnovi z diskete" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files not found at %s." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "" "Change\n" "Restore Path" msgstr "Obnovi iz datoteke" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "" "Restore Selected\n" "Files" msgstr "Odstrani vnos" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Remove user directories before restore." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "select path to restore (instead of /)" msgstr "Ali želite sedaj zagnati ,X -probeonly`?" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Other" msgstr "Obnovi iz datoteke" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Users" msgstr "Obnovi iz datoteke" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore system" msgstr "Namestitev sistema" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Other Media" msgstr "Drugo" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Select another media to restore from" msgstr "Ali želite sedaj zagnati ,X -probeonly`?" #: ../../standalone/drakbackup:1 #, c-format msgid "Please enter the directory where backups are stored" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore from Hard Disk." msgstr "Obnovi z diskete" #: ../../standalone/drakbackup:1 #, c-format msgid "Use quota for backup files." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Please enter the maximum size\n" " allowed for Drakbackup" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please enter the directory to save:" msgstr "Preizkusite miško" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Hard Disk to backup" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "please choose the date to restore" msgstr "Ali želite sedaj zagnati ,X -probeonly`?" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup the system files before:" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "OK to restore the other files." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid " Restore Configuration " msgstr "Nastavitev zaslona" #: ../../standalone/drakbackup:1 #, c-format msgid " Successfuly Restored on %s " msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid " All of your selected data have been " msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files are corrupted" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please uncheck or remove it on next time." msgstr "Kateri strežnik potrebujete?" #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data corrupted:\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data to restore:\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No configuration, please click Wizard or Advanced.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by webdav.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by rsync.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by SSH.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by FTP.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Tape \n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-CDROM.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Hard drive.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Daemon (%s) include:\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\tBackups use tar and gzip\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\tBackups use tar and bzip2\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\tDo not include System Files\n" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "" "\n" "- Options:\n" msgstr "Možnosti" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t\tErase=%s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid " (multi-session)" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid " on device: %s" msgstr "Naprava miške: %s\n" #: ../../standalone/drakbackup:1 #, c-format msgid "RW" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Other Files:\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- User Files:\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- System Files:\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Backup Sources: \n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Select user manually" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Users" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup system" msgstr "Nastavitev datotečnega sistema" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please choose what you want to backup" msgstr "Izberite kartico" #: ../../standalone/drakbackup:1 #, c-format msgid "on Tape Device" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "on CDROM" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "across Network" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "on Hard Drive" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please choose where you want to backup" msgstr "Izberite kartico" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "More Options" msgstr "Nastavitve modula:" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "When" msgstr "stopnja" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Where" msgstr "stopnja" #: ../../standalone/drakbackup:1 #, c-format msgid "What" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Send mail report after each backup to:" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Please be sure that the cron daemon is included in your services. \n" "\n" "Note that currently all 'net' medias also use the hard drive." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "" "Please choose the\n" "media for backup." msgstr "Ali želite sedaj zagnati ,X -probeonly`?" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "" "Please choose the time \n" "interval between each backup" msgstr "Izberite kartico" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Use daemon" msgstr "Uporabniško ime" #: ../../standalone/drakbackup:1 #, c-format msgid "monthly" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "weekly" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "daily" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "hourly" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "HardDrive / NFS" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "CDROM / DVDROM" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please enter the directory to save to:" msgstr "Preizkusite miško" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check if you want to eject your tape after the backup." msgstr "Izberite kartico" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check if you want to erase your tape before the backup." msgstr "Izberite kartico" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check if you want to use the non-rewinding device." msgstr "Izberite kartico" #: ../../standalone/drakbackup:1 #, c-format msgid "Please enter the device name to use for backup" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use tape to backup" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "No CD device defined!" msgstr "Izberite datoteko" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Please enter your CD Writer device name\n" " ex: 0,1,0" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check if you are using a DVDRAM device" msgstr "Kliknite na razdelek" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check if you are using a DVDR device" msgstr "Kliknite na razdelek" #: ../../standalone/drakbackup:1 #, c-format msgid " Erase Now " msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check if you want to erase your RW media (1st Session)" msgstr "Kliknite na razdelek" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check if you are using CDRW media" msgstr "Kliknite na razdelek" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check for multisession CD" msgstr "Kliknite na razdelek" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please choose your CD/DVD media size (Mb)" msgstr "Izberite kartico" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Please choose your CD/DVD device\n" "(Press Enter to propogate settings to other fields.\n" "This field isn't necessary, only a tool to fill in the form.)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use CD/DVDROM to backup" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Need hostname, username and password!" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Remember this password" msgstr "Nastavitev gesla root" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please enter your password" msgstr "Poskusite ponovno" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please enter your login" msgstr "Poskusite ponovno" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Please enter the directory (or module) to\n" " put the backup on this host." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please enter the host name or IP." msgstr "Preizkusite miško" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Other (not drakbackup)\n" "keys in place already" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" " Transfer \n" "Now" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Create/Transfer\n" "backup keys for SSH" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Expect for SSH" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Net Method:" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Use network connection to backup" msgstr "Izberite strežnik" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Users" msgstr "Uporabniško ime" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Windows (FAT32)" msgstr "Odstranjevanje Oken(TM)" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Incremental Backups (do not replace old backups)" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Remove Selected" msgstr "Odstrani vnos" #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include the browser cache" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check all users that you want to include in your backup." msgstr "Izberite kartico" #: ../../standalone/drakbackup:1 #, c-format msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use incremental backup (do not replace old backups)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup your System files. (/etc directory)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Please check all options that you need.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Select the files or directories and click on 'Add'" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, fuzzy, c-format msgid "File Selection" msgstr "Izberite strežnik" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't create catalog!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid " Error while sending mail. \n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "file list sent by FTP: %s\n" " " msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No changes to backup!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Hard Disk Backup files..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Other files..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Hard Disk Backup Progress..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup User files..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup system files..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No tape in %s!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission problem accessing CD." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to erase the media." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Not erasable media!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Does not appear to be recordable media!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No CDR/DVDR in drive!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV transfer failed!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV remote site already in sync!" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Total progess" msgstr "Testiraj ponovno" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s\\@%s\n" "\n" "without being prompted for a password." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "%s not responding" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Can't find %s on %s" msgstr "Napaka pri odpiranju %s za pisanje: %s" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission denied transferring %s to %s" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Bad password on %s" msgstr "Geslo" #: ../../standalone/drakbackup:1 #, c-format msgid "No password prompt on %s at port %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "ERROR: Cannot spawn %s." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to generate the keys." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "%s exists, delete?\n" "\n" "Warning: If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Report \n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "INFO" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "FATAL" msgstr "FAT" #: ../../standalone/drakbackup:1 #, c-format msgid "WARNING" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Cron not available yet as non-root" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Installation of %s failed. The following error occured:" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "No, I don't want autologin" msgstr "Ne, ne želim samodejne prijave" #: ../../standalone/drakboot:1 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "Da, želim samodejno prijavo s tem uporabnikom" #: ../../standalone/drakboot:1 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "Zagon sistema X-Windows pri zagonu sistema" #: ../../standalone/drakboot:1 #, c-format msgid "System mode" msgstr "Sistemski način" #: ../../standalone/drakboot:1 #, c-format msgid "Bootsplash" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo screen" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "" "\n" "Select the theme for\n" "lilo and bootsplash,\n" "you can choose\n" "them separately" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Themes" msgstr "Teme" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Splash selection" msgstr "Izberite strežnik" #: ../../standalone/drakboot:1 #, c-format msgid "" "You are currently using %s as your boot manager.\n" "Click on Configure to launch the setup wizard." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "LiLo and Bootsplash themes installation successfull" msgstr "" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Theme installation failed!" msgstr "Izberite razred namestitve" #: ../../standalone/drakboot:1 ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Notice" msgstr "Preklic" #: ../../standalone/drakboot:1 #, c-format msgid "Relaunch 'lilo'" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't relaunch LiLo!\n" "Launch \"lilo\" as root in command line to complete LiLo theme installation." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't write /etc/sysconfig/bootsplash\n" "File not found." msgstr "" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Write %s" msgstr "XFree %s" #: ../../standalone/drakboot:1 #, c-format msgid "Can't write /etc/sysconfig/bootsplash." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo message not found" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Copy %s to %s" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Backup %s to %s.old" msgstr "" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Create new theme" msgstr "Ustvarjanje novega razdelka" #: ../../standalone/drakboot:1 #, c-format msgid "" "Display theme\n" "under console" msgstr "" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Install themes" msgstr "Namestitev sistema" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo/grub mode" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Yaboot mode" msgstr "" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #, c-format msgid "Q" msgstr "Q" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Quit" msgstr "/Datoteka/_Končaj" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #, c-format msgid "/_File" msgstr "/_Datoteka" #: ../../standalone/drakboot:1 #, c-format msgid "Boot Style Configuration" msgstr "Nastavitev zagonskega stila" #: ../../standalone/drakbug:1 #, c-format msgid "No browser available! Please install one" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "connecting to Bugzilla wizard ..." msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Package not installed" msgstr "Izhod iz namestitve" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Not installed" msgstr "Izhod iz namestitve" #: ../../standalone/drakbug:1 #, c-format msgid "Standalone Tools" msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Report" msgstr "Formatiraj" #: ../../standalone/drakbug:1 #, c-format msgid "" "\n" "\n" "To submit a bug report, click on the button report.\n" "This will open a web browser window on https://drakbug.mandrakesoft.com\n" " where you'll find a form to fill in.The information displayed above will " "be \n" "transferred to that server\n" "\n" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Release: " msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Kernel:" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Package: " msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Application:" msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Configuration Wizards" msgstr "Nastavitev zaslona" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Userdrake" msgstr "Tiskalnik" #: ../../standalone/drakbug:1 #, c-format msgid "Windows Migration tool" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Urpmi" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Software Manager" msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Remote Control" msgstr "Odstrani vnos" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Msec" msgstr "Premakni" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Menudrake" msgstr "Napredno" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Mandrake Online" msgstr "Kateri frekvenčni čip (ang. clockchip) imate?" #: ../../standalone/drakbug:1 #, c-format msgid "HardDrake" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Synchronization tool" msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "First Time Wizard" msgstr "Dobrodošli v Čarovnika za prvikrat" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Mandrake Control Center" msgstr "Kateri frekvenčni čip (ang. clockchip) imate?" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Bug Report Tool" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Parameters" msgstr "" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Internet Connection Configuration" msgstr "Izberite strežnik" #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP Client" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Ethernet Card" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Gateway" msgstr "" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connection type: " msgstr "Nastavitev zaslona" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Profile: " msgstr "priklop neuspešen: " #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Internet connection configuration" msgstr "Izberite strežnik" #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have an Internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "" "This interface has not been configured yet.\n" "Launch the configuration wizard in the main window" msgstr "" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "activate now" msgstr "Aktivno" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "deactivate now" msgstr "Aktivno" #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP client" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Started on boot" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Boot Protocol" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Adapter %s: %s" msgstr "" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "LAN Configuration" msgstr "Nastavitev zaslona" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "LAN configuration" msgstr "Nastavitev zaslona" #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Connect..." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Disconnect..." msgstr "" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Not connected" msgstr "Izberite strežnik" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connected" msgstr "Nastavitev zaslona" #: ../../standalone/drakconnect:1 #, c-format msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Interface:" msgstr "" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Gateway:" msgstr "Zagonska naprava" #: ../../standalone/drakconnect:1 #, c-format msgid "Apply" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Click here to launch the wizard ->" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Wizard..." msgstr "Čarovnik..." #: ../../standalone/drakconnect:1 #, c-format msgid "Status:" msgstr "" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Type:" msgstr "Tip:" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Internet access" msgstr "Nastavitev zaslona" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Hostname: " msgstr "Izberite strežnik" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Configure Local Area Network..." msgstr "Nastavitev zaslona" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "State" msgstr "Meni Start" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Driver" msgstr "Izberite strežnik" #: ../../standalone/drakconnect:1 #, c-format msgid "Protocol" msgstr "" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Interface" msgstr "Nastavitev zaslona" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Configure Internet Access..." msgstr "Nastavitev servisov" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Wait please" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "" "Name of the profile to create (the new profile is created as a copy of the " "current one) :" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "New profile..." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Profile to delete:" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Del profile..." msgstr "" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Network configuration (%d adapters)" msgstr "Nastavitev zaslona" #: ../../standalone/drakedm:1 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" #: ../../standalone/drakedm:1 #, c-format msgid "Choosing a display manager" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "" "Unable to properly close mkbootdisk: \n" " %s \n" " %s" msgstr "" "Ne morem pravilno zapreti mkbootdisk-a: \n" " %s \n" " %s" #: ../../standalone/drakfloppy:1 #, c-format msgid "Unable to fork: %s" msgstr "Ne morem ustvariti novega procesa: %s" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" "Diskete ni v disketniku %s.\n" "Prosim vstavi jo." #: ../../standalone/drakfloppy:1 #, c-format msgid "Be sure a media is present for the device %s" msgstr "Prepričaj se, da je disketa v disketniku %s" #: ../../standalone/drakfloppy:1 #, c-format msgid "Build the disk" msgstr "Naredi disketo" #: ../../standalone/drakfloppy:1 #, c-format msgid "Output" msgstr "Izpis" #: ../../standalone/drakfloppy:1 #, c-format msgid "Remove a module" msgstr "Odstrani modul" #: ../../standalone/drakfloppy:1 #, c-format msgid "Add a module" msgstr "Dodaj modul" #: ../../standalone/drakfloppy:1 #, c-format msgid "omit scsi modules" msgstr "spusti scsi module" #: ../../standalone/drakfloppy:1 #, c-format msgid "if needed" msgstr "če je potrebno" #: ../../standalone/drakfloppy:1 #, c-format msgid "omit raid modules" msgstr "spusti raid module" #: ../../standalone/drakfloppy:1 #, c-format msgid "force" msgstr "prisilno" #: ../../standalone/drakfloppy:1 #, c-format msgid "mkinitrd optional arguments" msgstr "mkinitrd dodatni argumenti" #: ../../standalone/drakfloppy:1 #, c-format msgid "Expert Area" msgstr "Za strokovnjake" #: ../../standalone/drakfloppy:1 #, c-format msgid "kernel version" msgstr "verzija jedra" #: ../../standalone/drakfloppy:1 #, c-format msgid "default" msgstr "privzeto" #: ../../standalone/drakfloppy:1 #, c-format msgid "General" msgstr "Splošno" #: ../../standalone/drakfloppy:1 #, c-format msgid "boot disk creation" msgstr "ustvarjanje zagonske diskete" #: ../../standalone/drakfloppy:1 #, c-format msgid "drakfloppy" msgstr "drakfloppy" #: ../../standalone/drakfloppy:1 #, c-format msgid "Size" msgstr "Velikost" #: ../../standalone/drakfloppy:1 #, c-format msgid "Module name" msgstr "Ime modula" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Post Uninstall" msgstr "Izhod iz namestitve" #: ../../standalone/drakfont:1 #, c-format msgid "Remove fonts on your system" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Initial tests" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Post Install" msgstr "Namestiti" #: ../../standalone/drakfont:1 #, c-format msgid "Install & convert Fonts" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Copy fonts on your system" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Remove List" msgstr "Odstrani vnos" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Selected All" msgstr "Izberite datoteko" #: ../../standalone/drakfont:1 #, c-format msgid "Unselected All" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "here if no." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "click here if you are sure." msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Install List" msgstr "Namestitev sistema" #: ../../standalone/drakfont:1 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Generic Printers" msgstr "Izberite strežnik" #: ../../standalone/drakfont:1 #, c-format msgid "Abiword" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "StarOffice" msgstr "Preklic" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Choose the applications that will support the fonts:" msgstr "Ali želite zdaj zagnati ,X -probeonly`?" #: ../../standalone/drakfont:1 #, c-format msgid "" "\n" " Copyright (C) 2001-2002 by MandrakeSoft \n" "\tDUPONT Sebastien (original version)\n" " CHAUMETTE Damien \n" "\n" " This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" "\n" " Thanks:\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "About" msgstr "/Pomoč/_O kfloppy..." #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Font List" msgstr "Točka priklopa" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Advanced Options" msgstr "Nastavitev zaslona" #: ../../standalone/drakfont:1 #, c-format msgid "Uninstall Fonts" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Get Windows Fonts" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Import Fonts" msgstr "Formatiranje razdelkov" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "done" msgstr "Končano" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "xfs restart" msgstr "omeji" #: ../../standalone/drakfont:1 #, c-format msgid "Suppress Fonts Files" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Restart XFS" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Suppress Temporary Files" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "type1inst building" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "pfm fonts conversion" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "ttf fonts conversion" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript referencing" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Fonts conversion" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "True Type install done" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "please wait during ttmkfdir..." msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "True Type fonts installation" msgstr "Priprava namestitbe" #: ../../standalone/drakfont:1 #, c-format msgid "Fonts copy" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Search for fonts in installed list" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "could not find any font.\n" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Reselect correct fonts" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "could not find any font in your mounted partitions" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "no fonts found" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "parse all fonts" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Unselect fonts installed" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Search installed fonts" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Welcome to the Internet Connection Sharing utility!\n" "\n" "%s\n" "\n" "Click on Configure to launch the setup wizard." msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Internet Connection Sharing configuration" msgstr "Izberite strežnik" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "No Internet Connection Sharing has ever been configured." msgstr "Izberite strežnik" #: ../../standalone/drakgw:1 #, c-format msgid "The setup has already been done, and it's currently enabled." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The setup has already been done, but it's currently disabled." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Problems installing package %s" msgstr "Nameščanje paketa %s" #: ../../standalone/drakgw:1 #, c-format msgid "Configuring scripts, installing software, starting servers..." msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Configuring..." msgstr "Nastavitev zaslona" #: ../../standalone/drakgw:1 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The Local Network did not finish with `.0', bailing out." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Re-configure interface and DHCP server" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The maximum lease (in seconds)" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The default lease (in seconds)" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP end range" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP start range" msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "The internal domain name" msgstr "Odstrani vnos" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "The DNS Server IP" msgstr "Izberite strežnik" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "(This) DHCP Server IP" msgstr "Izberite strežnik" #: ../../standalone/drakgw:1 #, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you don't know the meaning of an option, simply leave it as it is.\n" "\n" msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Local Network adress" msgstr "Tabela" #: ../../standalone/drakgw:1 #, c-format msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\t\t \n" "Otherwise, I can reconfigure your interface and (re)configure a DHCP server " "for you.\n" "\n" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Current interface configuration" msgstr "Nastavitev zaslona" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Show current interface configuration" msgstr "Nastavitev zaslona" #: ../../standalone/drakgw:1 #, c-format msgid "No (experts only)" msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Automatic reconfiguration" msgstr "Nastavitev zagonskega stila" #: ../../standalone/drakgw:1 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Network interface already configured" msgstr "Monitor ni nastavljen" #: ../../standalone/drakgw:1 #, c-format msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Network interface" msgstr "" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "No network adapter on your system!" msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Interface %s" msgstr "Nastavitev zaslona" #: ../../standalone/drakgw:1 #, c-format msgid "Interface %s (using module %s)" msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Net Device" msgstr "Izberite strežnik" #: ../../standalone/drakgw:1 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Internet Connection Sharing" msgstr "Izberite strežnik" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Internet Connection Sharing is now enabled." msgstr "Izberite strežnik" #: ../../standalone/drakgw:1 #, c-format msgid "Enabling servers..." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "dismiss" msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "reconfigure" msgstr "Nastavitev X" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "enable" msgstr "Tabela" #: ../../standalone/drakgw:1 #, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently disabled" msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Internet Connection Sharing is now disabled." msgstr "Izberite strežnik" #: ../../standalone/drakgw:1 #, c-format msgid "Disabling servers..." msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "disable" msgstr "Tabela" #: ../../standalone/drakgw:1 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently enabled" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Sorry, we support only 2.4 kernels." msgstr "" #: ../../standalone/drakhelp:1 #, c-format msgid "" "No browser is installed on your system, Please install one if you want to " "browse the help system" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Path" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "group :" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "user :" msgstr "Uporabniško ime" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Path selection" msgstr "Izberite strežnik" #: ../../standalone/drakperm:1 #, c-format msgid "when checked, owner and group won't be changed" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Use group id for execution" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Use owner id for execution" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Set-GID" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Set-UID" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "sticky-bit" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Property" msgstr "Formatiraj" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Permissions" msgstr "Različica: %s\n" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Current user" msgstr "Sprejmi uporabnika" #: ../../standalone/drakperm:1 #, c-format msgid "browse" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Edit current rule" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "edit" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Delete selected rule" msgstr "Odstrani vnos" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "delete" msgstr "Izbriši" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Add a new rule at the end" msgstr "Odstrani vnos" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "add a rule" msgstr "Dodaj modul" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule down one level" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Down" msgstr "Končano" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule up one level" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Up" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "select perm file to see/edit" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "" "Drakperm is used to see files to use in order to fix permissions, owners, " "and groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "permissions" msgstr "razdelek %s" #: ../../standalone/drakperm:1 #, c-format msgid "group" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "user" msgstr "Uporabniško ime" #: ../../standalone/drakperm:1 #, c-format msgid "path" msgstr "" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Location of auto_install.cfg file" msgstr "Priprava namestitbe" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the auto_install.cfg file is located.\n" "\n" "Leave it blank if you do not want to set up automatic installation mode.\n" "\n" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "" "No CD or DVD image found, please copy the installation program and rpm files." msgstr "" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "No image found" msgstr "Tiskalnik" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Installation image directory" msgstr "Nastavitev zaslona" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the installation image will be available.\n" "\n" "If you do not have an existing directory, please copy the CD or DVD " "contents.\n" "\n" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP end ip" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP start ip" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "" "The DHCP server will allow other computer to boot using PXE in the given " "range of address.\n" "\n" "The network address is %s using a netmask of %s.\n" "\n" msgstr "" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Interface %s (on network %s)" msgstr "Nastavitev zaslona" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Please choose which network interface will be used for the dhcp server." msgstr "Kateri strežnik potrebujete?" #: ../../standalone/drakpxe:1 #, c-format msgid "" "You are about to configure your computer to install a PXE server as a DHCP " "server\n" "and a TFTP server to build an installation server.\n" "With that feature, other computers on your local network will be installable " "using this computer as source.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Installation Server Configuration" msgstr "Nastavitev zaslona" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "PXE Server Configuration" msgstr "Nastavitev zaslona" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Please wait, setting security options..." msgstr "Priprava namestitbe" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Please wait, setting security level..." msgstr "Ali želite sedaj zagnati ,X -probeonly`?" #: ../../standalone/draksec:1 #, c-format msgid "Periodic Checks" msgstr "" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "System Options" msgstr "Nastavitve modula:" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Network Options" msgstr "Nastavitve modula:" #: ../../standalone/draksec:1 #, c-format msgid "" "The following options can be set to customize your\n" "system security. If you need an explanation, look at the help tooltip.\n" msgstr "" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Security Administrator:" msgstr "Odstrani vnos" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Security Alerts:" msgstr "Privzeto" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Security Level:" msgstr "Privzeto" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "(default value: %s)" msgstr " (Privzeto)" #: ../../standalone/draksec:1 #, c-format msgid "" "Standard: This is the standard security recommended for a computer that will " "be used to connect\n" " to the Internet as a client.\n" "\n" "High: There are already some restrictions, and more automatic checks " "are run every night.\n" "\n" "Higher: The security is now high enough to use the system as a server " "which can accept\n" " connections from many clients. If your machine is only a " "client on the Internet, you\n" " should choose a lower level.\n" "\n" "Paranoid: This is similar to the previous level, but the system is entirely " "closed and security\n" " features are at their maximum\n" "\n" "Security Administrator:\n" " If the 'Security Alerts' option is set, security alerts will " "be sent to this user (username or\n" " email)" msgstr "" #: ../../standalone/draksound:1 #, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the sndconfig " "program. Just type \"sndconfig\" in a console." msgstr "" #: ../../standalone/draksound:1 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/draksound:1 #, fuzzy, c-format msgid "No Sound Card detected!" msgstr "Izberite strežnik" #: ../../standalone/draksplash:1 #, c-format msgid "%s BootSplash (%s) preview" msgstr "" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Generating preview ..." msgstr "Odstrani vnos" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "You must choose an image file first!" msgstr "Izberite strežnik" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "ProgressBar color selection" msgstr "Izberite strežnik" #: ../../standalone/draksplash:1 #, c-format msgid "This theme does not yet have a bootsplash in %s !" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "saving Bootsplash theme..." msgstr "" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "choose image file" msgstr "Izberite akcijo" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "choose image" msgstr "Izberite akcijo" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Configure bootsplash picture" msgstr "Nastavitev servisov" #: ../../standalone/draksplash:1 #, c-format msgid "Make kernel message quiet by default" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Display logo on Console" msgstr "" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Choose color" msgstr "Izberite monitor" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Save theme" msgstr "Namestitev sistema" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Preview" msgstr "naprava" #: ../../standalone/draksplash:1 #, c-format msgid "the color of the progress bar" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "the height of the progress bar" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "the width of the progress bar" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "text box height" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "text width" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "y coordinate of text box\n" "in number of characters" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "x coordinate of text box\n" "in number of characters" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Browse" msgstr "" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Theme name" msgstr "Uporabniško ime" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "final resolution" msgstr "Ločljivost" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "first step creation" msgstr "ustvarjanje zagonske diskete" #: ../../standalone/draksplash:1 #, c-format msgid "" "package 'ImageMagick' is required to be able to complete configuration.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "No TV Card detected!" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Have a nice day!" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "XawTV isn't installed!" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "There was an error while scanning for TV channels" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels in progress ..." msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Area:" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "TV norm:" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Australian Optus cable TV" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Newzealand" msgstr "" #: ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "France [SECAM]" msgstr "Prekliči" #: ../../standalone/drakxtv:1 #, c-format msgid "East Europe" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "West Europe" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "China (broadcast)" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (cable)" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (broadcast)" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Canada (cable)" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable-hrc)" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable)" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (broadcast)" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "" "XawTV isn't installed!\n" "\n" "\n" "If you do have a TV card but DrakX has neither detected it (no bttv nor " "saa7134\n" "module in \"/etc/modules\") nor installed xawtv, please send the\n" "results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n" "with subject \"undetected TV card\".\n" "\n" "\n" "You can install it by typing \"urpmi xawtv\" as root, in a console." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "primary" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "secondary" msgstr "%d sekund" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Unknown" msgstr "Splošno" #: ../../standalone/harddrake2:1 #, c-format msgid "unknown" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Running \"%s\" ..." msgstr "Odstrani vnos" #: ../../standalone/harddrake2:1 #, c-format msgid "Run config tool" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Configure module" msgstr "Nastavitev miške" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Information" msgstr "Pokaži informacije" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Detected hardware" msgstr "Glejte informacije o strojni opremi" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Harddrake2 version " msgstr "Prepoznavanje trdega diska" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Detection in progress" msgstr "Podvojena točka priklopa %s" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Author:" msgstr "Samodejna zaznava" #: ../../standalone/harddrake2:1 #, c-format msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "Version:" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "About Harddrake" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/_About..." msgstr "/Pomoč/_O kfloppy..." #: ../../standalone/harddrake2:1 #, c-format msgid "/_Report Bug" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Select a device !" msgstr "Izberite grafično kartico" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Description of the fields:\n" "\n" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Harddrake help" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/_Fields description" msgstr "Izberite strežnik" #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #, c-format msgid "/_Help" msgstr "/_Pomoč" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/_Quit" msgstr "Izhod" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/Autodetect _jazz drives" msgstr "Odstrani vnos" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/Autodetect _modems" msgstr "Odstrani vnos" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/Autodetect _printers" msgstr "Odstrani vnos" #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #, c-format msgid "/_Options" msgstr "/_Nastavitve" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the processor" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the device" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "The type of bus on which the mouse is connected" msgstr "Kateri strežnik potrebujete?" #: ../../standalone/harddrake2:1 #, c-format msgid "Stepping of the cpu (sub model (generation) number)" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Model stepping" msgstr "Formatiranje" #: ../../standalone/harddrake2:1 #, c-format msgid "the number of the processor" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Processor ID" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "network printer port" msgstr "Izberite strežnik" #: ../../standalone/harddrake2:1 #, c-format msgid "the name of the CPU" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Name" msgstr "Izberite strežnik" #: ../../standalone/harddrake2:1 #, c-format msgid "the number of buttons the mouse has" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Number of buttons" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Official vendor name of the cpu" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Model name" msgstr "Ime modula" #: ../../standalone/harddrake2:1 #, c-format msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Model" msgstr "Premakni" #: ../../standalone/harddrake2:1 #, c-format msgid "hard disk model" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "class of hardware device" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Media class" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Sub generation of the cpu" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Level" msgstr "stopnja" #: ../../standalone/harddrake2:1 #, c-format msgid "Format of floppies supported by the drive" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Floppy format" msgstr "Formatiraj" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Halt bug" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "F00f bug" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Whether the FPU has an irq vector" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Is FPU present" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Fdiv bug" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "CPU flags reported by the kernel" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Flags" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Module" msgstr "Premakni" #: ../../standalone/harddrake2:1 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "New devfs device" msgstr "Zagonska naprava" #: ../../standalone/harddrake2:1 #, c-format msgid "old static device name used in dev package" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Old device file" msgstr "Izberite datoteko" #: ../../standalone/harddrake2:1 #, c-format msgid "This field describes the device" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "The CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Frequency (MHz)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Information level that can be obtained through the cpuid instruction" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Cpuid level" msgstr "Privzeto" #: ../../standalone/harddrake2:1 #, c-format msgid "Family of the cpu (eg: 6 for i686 class)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Cpuid family" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Whether this cpu has the Cyrix 6x86 Coma bug" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Coma bug" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Drive capacity" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Size of the (second level) cpu cache" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Cache size" msgstr "velikost kosa" #: ../../standalone/harddrake2:1 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Location on the bus" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Bus identification" msgstr "Nastavitev zaslona" #: ../../standalone/harddrake2:1 #, c-format msgid "" "The GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Bogomips" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "EIDE/SCSI channel" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Channel" msgstr "Prekliči" #: ../../standalone/harddrake2:1 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Bus" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Alternative drivers" msgstr "" #: ../../standalone/keyboarddrake:1 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "" #: ../../standalone/keyboarddrake:1 #, fuzzy, c-format msgid "Please, choose your keyboard layout." msgstr "Izberite kartico" #: ../../standalone/livedrake:1 #, c-format msgid "Unable to start live upgrade !!!\n" msgstr "" #: ../../standalone/livedrake:1 #, c-format msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" #: ../../standalone/livedrake:1 #, fuzzy, c-format msgid "Change Cd-Rom" msgstr "Spremeni ločljivost" #: ../../standalone/localedrake:1 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Save as.." msgstr "Shrani kot..." #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Please enter your email address below " msgstr "Poskusite ponovno" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "alert configuration" msgstr "Nastavitev zaslona" #: ../../standalone/logdrake:1 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "load setting" msgstr "Formatiranje" #: ../../standalone/logdrake:1 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "service setting" msgstr "naprava" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Xinetd Service" msgstr "Izberite strežnik" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Webmin Service" msgstr "naprava" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "SSH Server" msgstr "Izberite strežnik" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Samba Server" msgstr "Izberite strežnik" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Postfix Mail Server" msgstr "Izberite strežnik" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Ftp Server" msgstr "Izberite strežnik" #: ../../standalone/logdrake:1 #, c-format msgid "Domain Name Resolver" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Apache World Wide Web Server" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Mail alert configuration" msgstr "Nastavitev zaslona" #: ../../standalone/logdrake:1 #, c-format msgid "Mail alert" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "please wait, parsing file: %s" msgstr "prosim počakaj, analiziram datoteko: %s" #: ../../standalone/logdrake:1 #, c-format msgid "Content of the file" msgstr "Vsebina datoteke" #: ../../standalone/logdrake:1 #, c-format msgid "Calendar" msgstr "Koledar" #: ../../standalone/logdrake:1 #, c-format msgid "Choose file" msgstr "Izberi datoteko" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "but not matching" msgstr "neujemanje" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "matching" msgstr "ujemanje" #: ../../standalone/logdrake:1 ../../standalone/net_monitor:1 #, c-format msgid "Settings" msgstr "Nastavitve" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "A tool to monitor your logs" msgstr "Orodje za nadziranje log-ov" #: ../../standalone/logdrake:1 #, c-format msgid "search" msgstr "išči" #: ../../standalone/logdrake:1 #, c-format msgid "Mandrake Tools Explanation" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Syslog" msgstr "syslog" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Messages" msgstr "sporočilo" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "User" msgstr "Uporabniško ime" #: ../../standalone/logdrake:1 #, c-format msgid "/Help/_About..." msgstr "/Pomoč/_O kfloppy..." #: ../../standalone/logdrake:1 #, c-format msgid "/Options/Test" msgstr "/Nastavitve/Test" #: ../../standalone/logdrake:1 #, c-format msgid "/File/-" msgstr "/Datoteka/-" #: ../../standalone/logdrake:1 #, c-format msgid "/File/Save _As" msgstr "/Datoteka/Shrani_kot" #: ../../standalone/logdrake:1 #, c-format msgid "S" msgstr "S" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Save" msgstr "/Datoteka/_Shrani" #: ../../standalone/logdrake:1 #, c-format msgid "O" msgstr "O" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Open" msgstr "/Datoteka/_Odpri" #: ../../standalone/logdrake:1 #, c-format msgid "N" msgstr "N" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_New" msgstr "/Datoteka/_Nova" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Show only for the selected day" msgstr "Prikaži samo za ta dan" #: ../../standalone/mousedrake:1 #, c-format msgid "Emulate third button?" msgstr "" #: ../../standalone/mousedrake:1 #, fuzzy, c-format msgid "Please choose your mouse type." msgstr "Ali želite sedaj zagnati ,X -probeonly`?" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connect %s" msgstr "Nastavitev zaslona" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Disconnect %s" msgstr "Izberite strežnik" #: ../../standalone/net_monitor:1 #, c-format msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "received" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "transmitted" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "received: " msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "sent: " msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Local measure" msgstr "Tiskalnik" #: ../../standalone/net_monitor:1 #, c-format msgid "average" msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Color configuration" msgstr "Nastavitev zaslona" #: ../../standalone/net_monitor:1 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandrake Control Center." msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connection complete." msgstr "Nastavitev zaslona" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnection from the Internet complete." msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnection from the Internet failed." msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connecting to the Internet " msgstr "Kateri frekvenčni čip (ang. clockchip) imate?" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Disconnecting from the Internet " msgstr "Kateri frekvenčni čip (ang. clockchip) imate?" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Wait please, testing your connection..." msgstr "Nastavitev RAMDAC" #: ../../standalone/net_monitor:1 #, c-format msgid "Logs" msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connection Time: " msgstr "Nastavitev zaslona" #: ../../standalone/net_monitor:1 #, c-format msgid "Receiving Speed:" msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Sending Speed:" msgstr "Shrani v datoteko" #: ../../standalone/net_monitor:1 #, c-format msgid "Statistics" msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Profile " msgstr "priklop neuspešen: " #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Network Monitoring" msgstr "Nastavitev zaslona" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Reading data of installed printers..." msgstr "Odstrani vnos" #: ../../standalone/scannerdrake:1 #, c-format msgid "Name/IP address of host:" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Scannerdrake" msgstr "Izberite grafično kartico" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "You must enter a host name or an IP address.\n" msgstr "Preizkusite miško" #: ../../standalone/scannerdrake:1 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Sharing of local scanners" msgstr "Odstrani vnos" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "This machine" msgstr "ujemanje" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Remove selected host" msgstr "Odstrani vnos" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Edit selected host" msgstr "Odstrani vnos" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Add host" msgstr "Dodaj uporabnika" #: ../../standalone/scannerdrake:1 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Usage of remote scanners" msgstr "Uporabi razpoložljiv prostor" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "All remote machines" msgstr "Odstrani vnos" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use the scanners on hosts: " msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use scanners on remote computers" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Scanner sharing to hosts: " msgstr "Izberite strežnik" #: ../../standalone/scannerdrake:1 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Re-generating list of configured scanners ..." msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Searching for new scanners ..." msgstr "Odstrani vnos" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Searching for configured scanners ..." msgstr "Odstrani vnos" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Scanner sharing" msgstr "Izberite strežnik" #: ../../standalone/scannerdrake:1 #, c-format msgid "Add a scanner manually" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Search for new scanners" msgstr "Odstrani vnos" #: ../../standalone/scannerdrake:1 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "Kateri frekvenčni čip (ang. clockchip) imate?" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "Kateri frekvenčni čip (ang. clockchip) imate?" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" from Multimedia/Graphics in the " "applications menu." msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "choose device" msgstr "Zagonska naprava" #: ../../standalone/scannerdrake:1 #, c-format msgid "Please select the device where your %s is attached" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Searching for scanners ..." msgstr "Odstrani vnos" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Auto-detect available ports" msgstr "Odstrani vnos" #: ../../standalone/scannerdrake:1 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the Mandrake Control Center in Hardware " "section." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is unsupported" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not known by this version of Scannerdrake." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not supported by this version of Mandrake Linux." msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Port: %s" msgstr "Formatiraj" #: ../../standalone/scannerdrake:1 #, c-format msgid ", " msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Detected model: %s" msgstr "Podvojena točka priklopa %s" #: ../../standalone/scannerdrake:1 #, c-format msgid " (" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Select a scanner model" msgstr "Izberite grafično kartico" #: ../../standalone/scannerdrake:1 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "%s found on %s, configure it automatically?" msgstr "Xconfigurator bo zdaj zagnal X in preveril nastavitve." #: ../../standalone/service_harddrake:1 #, fuzzy, c-format msgid "Hardware probing in progress" msgstr "Podvojena točka priklopa %s" #: ../../standalone/service_harddrake:1 #, c-format msgid "Some devices were added:\n" msgstr "" #: ../../standalone/service_harddrake:1 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Office Workstation" msgstr "Nastavitev zaslona" #: ../../share/compssUsers:999 msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Workstation" msgstr "Nastavitev zaslona" #: ../../share/compssUsers:999 #, fuzzy msgid "Game station" msgstr "Nastavitev zaslona" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Multimedia station" msgstr "Večpredstavnost" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Internet station" msgstr "Nastavitev zaslona" #: ../../share/compssUsers:999 msgid "" "Set of tools to read and send mail and news (pine, mutt, tin..) and to " "browse the Web" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Network Computer (client)" msgstr "Izberite strežnik" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Configuration" msgstr "Nastavitev zaslona" #: ../../share/compssUsers:999 #, fuzzy msgid "Tools to ease the configuration of your computer" msgstr "Želite preizkusiti nastavitev?" #: ../../share/compssUsers:999 #, fuzzy msgid "Scientific Workstation" msgstr "Nastavitev zaslona" #: ../../share/compssUsers:999 msgid "Scientific applications such as gnuplot" msgstr "" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "KDE Workstation" msgstr "Nastavitev zaslona" #: ../../share/compssUsers:999 msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "" #: ../../share/compssUsers:999 msgid "Graphical Environment" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Gnome Workstation" msgstr "Nastavitev zaslona" #: ../../share/compssUsers:999 msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "" #: ../../share/compssUsers:999 msgid "Development" msgstr "" #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Documentation" msgstr "Nastavitve modula:" #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "" #: ../../share/compssUsers:999 msgid "LSB" msgstr "" #: ../../share/compssUsers:999 msgid "Linux Standard Base. Third party applications support" msgstr "" #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Mail" msgstr "Mali" #: ../../share/compssUsers:999 #, fuzzy msgid "Postfix mail server" msgstr "Izberite strežnik" #: ../../share/compssUsers:999 msgid "Database" msgstr "" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "" #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Internet gateway" msgstr "Nastavitev zaslona" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "" #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Network Computer server" msgstr "Izberite strežnik" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Office" msgstr "Preklic" #: ../../share/compssUsers:999 msgid "Set of tools for mail, news, web, file transfer, and chat" msgstr "" #: ../../share/compssUsers:999 msgid "Games" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Multimedia - Graphics" msgstr "Večpredstavnost" #: ../../share/compssUsers:999 msgid "Graphics programs such as The Gimp" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Multimedia - Sound" msgstr "Večpredstavnost" #: ../../share/compssUsers:999 msgid "Audio-related tools: mp3 or midi players, mixers, etc" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Multimedia - Video" msgstr "Večpredstavnost" #: ../../share/compssUsers:999 msgid "Video players and editors" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Multimedia - CD Burning" msgstr "Večpredstavnost" #: ../../share/compssUsers:999 msgid "Tools to create and burn CD's" msgstr "" #: ../../share/compssUsers:999 msgid "More Graphical Desktops (Gnome, IceWM)" msgstr "" #: ../../share/compssUsers:999 msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "" #: ../../share/compssUsers:999 msgid "Personal Information Management" msgstr "" #: ../../share/compssUsers:999 msgid "Tools for your Palm Pilot or your Visor" msgstr "" #: ../../share/compssUsers:999 msgid "Personal Finance" msgstr "" #: ../../share/compssUsers:999 msgid "Programs to manage your finances, such as gnucash" msgstr "" #, fuzzy #~ msgid "Get involved in the Free Software world" #~ msgstr "Preizkus nastavitev" #, fuzzy #~ msgid "Get the most from the Internet" #~ msgstr "Kateri frekvenčni čip (ang. clockchip) imate?" #, fuzzy #~ msgid "User interfaces" #~ msgstr "Nastavitev zaslona" #, fuzzy #~ msgid "" #~ "The following printers are configured. Double-click on a printer to " #~ "change its settings; to make it the default printer; to view information " #~ "about it; or to make a printer on a remote CUPS server available for Star " #~ "Office/OpenOffice.org/GIMP." #~ msgstr "" #~ "Tukaj so različni vnosi.\n" #~ "Lahko dodate še kakšnega ali spremenite obstoječega" #~ msgid "DrakFloppy Error: %s" #~ msgstr "DrakFloppy napaka: %s" #~ msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*" #~ msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*" #~ msgid "Launch Aurora at boot time" #~ msgstr "Zagon Aurore pri nalaganju sistema" #, fuzzy #~ msgid "Traditional Monitor" #~ msgstr "Spremeni monitor" #, fuzzy #~ msgid "NewStyle Monitor" #~ msgstr "Monitor" #, fuzzy #~ msgid "Secure Connection" #~ msgstr "Izberite strežnik" #, fuzzy #~ msgid "FTP Connection" #~ msgstr "Izberite strežnik" #~ msgid "/Options" #~ msgstr "/Nastavitve" #, fuzzy #~ msgid "/Autodetect jazz drives" #~ msgstr "Odstrani vnos" #, fuzzy #~ msgid "/Autodetect modems" #~ msgstr "Odstrani vnos" #, fuzzy #~ msgid "/Autodetect printers" #~ msgstr "Odstrani vnos" #~ msgid "" #~ "The partition you've selected to add as root (/) is physically located " #~ "beyond\n" #~ "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" #~ "If you plan to use the LILO boot manager, be careful to add a /boot " #~ "partition" #~ msgstr "" #~ "Razdelek, ki ste ga izbrali kot korenskega (/), se fizično nahaja za\n" #~ "1024-im cilindrom trdega diska in tudi razdelka /boot nimate.\n" #~ "Če nameravate uporabljati LILO, ne pozabite dodati /boot razdelka" #~ msgid "" #~ "Sorry I won't accept to create /boot so far onto the drive (on a cylinder " #~ "> 1024).\n" #~ "Either you use LILO and it won't work, or you don't use LILO and you " #~ "don't need /boot" #~ msgstr "" #~ "Oprostite, vendar /boot ne morete ustvariti tako daleč na pogonu (na " #~ "cilinder > 1024).\n" #~ "Ali boste uporabljali LILO, ki ne bo deloval ali pa ne boste uporabljali " #~ "LILO, tako da /boot ne potrebujete" #, fuzzy #~ msgid "Do you want to configure another printer?" #~ msgstr "Želite preizkusiti nastavitev?" #, fuzzy #~ msgid "Know how to use this printer" #~ msgstr "Želite preizkusiti nastavitev?" #, fuzzy #~ msgid "Preparing Printerdrake..." #~ msgstr "Odstrani vnos" #, fuzzy #~ msgid "Reading printer data ..." #~ msgstr "Odstrani vnos" #, fuzzy #~ msgid "" #~ "You must indicate where you wish to place the information required to " #~ "boot\n" #~ "GNU/Linux.\n" #~ "\n" #~ "Unless you know exactly what you are doing, choose \"First sector of " #~ "drive\n" #~ "(MBR)\"." #~ msgstr "" #~ "Izberite kam želite zapisati\n" #~ "informacije potrebne za zagon GNU/Linux-a.\n" #~ "\n" #~ "\n" #~ "Razen, če natančno veste kaj delate, izberite \"Prvi sektor pogona (MBR)" #~ "\"." #, fuzzy #~ msgid "" #~ "DrakX now needs to know if you want to perform a default (\"Recommended" #~ "\")\n" #~ "installation or if you want to have greater control (\"Expert\") over " #~ "your\n" #~ "installation. You can also choose to do a new installation or upgrade " #~ "your\n" #~ "existing Mandrake Linux system:\n" #~ "\n" #~ " * \"Install\": completely wipes out the old system. However, depending " #~ "on\n" #~ "what is currently installed on your machine, you may be able to keep " #~ "some\n" #~ "old partitions (Linux or otherwise) unchanged;\n" #~ "\n" #~ " * \"Upgrade\": this installation class allows to simply update the\n" #~ "packages currently installed on your Mandrake Linux system. It keeps " #~ "your\n" #~ "hard drives' current partitions as well as user configurations. All " #~ "other\n" #~ "configuration steps remain available, similar to a normal installation;\n" #~ "\n" #~ " * \"Upgrade Packages Only\": this new installation class allows you to\n" #~ "upgrade an existing Mandrake Linux system while keeping all system\n" #~ "configurations unchanged. Adding new packages to the current " #~ "installation\n" #~ "is also possible.\n" #~ "\n" #~ "Upgrades should work fine on Mandrake Linux systems using version \"8.1" #~ "\"\n" #~ "or later.\n" #~ "\n" #~ "Depending on your GNU/Linux knowledge, select one of the following " #~ "choices:\n" #~ "\n" #~ " * Recommended: choose this if you have never installed a GNU/Linux\n" #~ "operating system. The installation will be very easy and you will only " #~ "be\n" #~ "asked a few questions;\n" #~ "\n" #~ " * Expert: if you have a good GNU/Linux understanding, you may wish to\n" #~ "perform a highly customized installation. Some of the decisions you will\n" #~ "have to make may be difficult if you do not have good GNU/Linux " #~ "knowledge,\n" #~ "so it is not recommended that those without a fair amount of experience\n" #~ "select this installation class." #~ msgstr "" #~ "Izberite \"Namestitev\", če nimate nameščene še nobene različice Mandrake " #~ "Linux\n" #~ "ali če želite uporabljati več operacijskih sistemov.\n" #~ "\n" #~ "\n" #~ "Izberite \"Nadgradnja\", če želite nadgraditi že obstoječo različico " #~ "Mandrake Linux.\n" #~ "\n" #~ "\n" #~ "Glede na vaše znanje o sistemu GNU/Linux, lahko izbirate med naslednjimi " #~ "razredi namestitve ali nadgradnje\n" #~ "operacijskega sistema Mandrake Linux:\n" #~ "\n" #~ "\t* Priporočeno: če niste še nikdar nameščali operacijskega sistema GNU/" #~ "Linux izberite to možnost. Namestitev bo preprosta,\n" #~ "\t odgovoriti boste morali samo na nekaj vprašanj.\n" #~ "\n" #~ "\n" #~ "\t* Prilagojeno: če poznate operacijski sistem GNU/Linux, lahko izberete " #~ "primarni namen uporabe (delovna postaja,\n" #~ "\t strežnik, razvoj) vašega sistema. Odgovoriti boste morali na več " #~ "vprašanj kot pri namestitvi \"Priporočeno\",\n" #~ "\t tako da morate za izbiro te namestitvene možnosti poznati operacijski " #~ "sistem GNU/Linux.\n" #~ " \n" #~ "\n" #~ "\t* Napredno: če zelo dobro poznate operacijski sistem GNU/Linux, lahko " #~ "izberete to možnost. Kot pri namestitvi \n" #~ "\t \"Prilagojeno\", boste lahko tudi tukaj izbrali primarni namen uporabe " #~ "(delovna postaja, strežnik, razvoj). \n" #~ "\t Bodite pazljivi pri izbiri te namestitve. Namestili boste posebej " #~ "visoko prilagojeno namestitev.\n" #~ "\t Odgovori na nekatera vprašanja so lahko težavni, če nimate dovolj " #~ "znanja o sistemu GNU/Linux. Ne izberite\n" #~ "\t tega razreda, razen če veste kaj počnete." #, fuzzy #~ msgid "quit" #~ msgstr "Izhod" #, fuzzy #~ msgid "save" #~ msgstr "Meni Start"