# Translation file of Mandrake graphic install
# Copyright (C) 1999 Mandrakesoft
# Terje Bjerkelia <terje@bjerkelia.com>, 1999
#
msgid ""
msgstr ""
"Project-Id-Version: panoramix VERSION\n"
"POT-Creation-Date: 1999-09-19 15:47+0200\n"
"PO-Revision-Date: 1999-08-25 11:07+0200\n"
"Last-Translator: Terje Bjerkelia <terje@bjerkelia.com>\n"
"Language-Team: norwegian\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=iso-8859-1\n"
"Content-Transfer-Encoding: 8bit\n"

#: ../Xconfigurator.pm_.c:163
msgid "Choose a graphic card"
msgstr "Velg et grafikk-kort"

#: ../Xconfigurator.pm_.c:164
#, fuzzy
msgid "Choose a X server"
msgstr "Velg ny størrelse"

#: ../Xconfigurator.pm_.c:186
msgid "Select the memory size of your graphic card"
msgstr "Velg minnestørrelsen til grafikk-kortet ditt"

#: ../Xconfigurator.pm_.c:199
msgid "Choose a monitor"
msgstr "Velg en monitor"

#: ../Xconfigurator.pm_.c:209
msgid "Horizontal refresh rate"
msgstr ""

#: ../Xconfigurator.pm_.c:209
msgid "Vertical refresh rate"
msgstr ""

#: ../Xconfigurator.pm_.c:248
msgid "Monitor not configured"
msgstr "Monitor er ikke konfigurert"

#: ../Xconfigurator.pm_.c:251
msgid "Graphic card not configured yet"
msgstr "Grafikk-kort er ikke konfigurert ennå"

#: ../Xconfigurator.pm_.c:254
msgid "Resolutions not chosen yet"
msgstr "Oppløsninger er ikke valgt ennå"

#: ../Xconfigurator.pm_.c:261
msgid "Do you want to test the configuration?"
msgstr "Vil du teste konfigurasjonen?"

#: ../Xconfigurator.pm_.c:261
msgid "Test configuration"
msgstr "Test konfigurasjon"

#: ../Xconfigurator.pm_.c:295
#, c-format
msgid "(leaving in %d seconds)"
msgstr "(slutter om %d sekunder)"

#: ../Xconfigurator.pm_.c:299
msgid "Is this ok?"
msgstr "Er dette ok?"

#: ../Xconfigurator.pm_.c:307
msgid "An error occurred, try changing some parameters"
msgstr "En feil oppsto, prøv å endre noen parametere"

#: ../Xconfigurator.pm_.c:315 ../Xconfigurator.pm_.c:464
msgid "Automatic resolutions"
msgstr "Automatiske oppløsninger"

#: ../Xconfigurator.pm_.c:363 ../install_steps_interactive.pm_.c:393
#: ../install_steps_interactive.pm_.c:394
msgid "Resolution"
msgstr "Oppløsning"

#: ../Xconfigurator.pm_.c:397
msgid "Choose resolution and color depth"
msgstr "Velg oppløsning og fargedybde"

#: ../Xconfigurator.pm_.c:656
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Tastatur-layout: %s\n"

#: ../Xconfigurator.pm_.c:657
#, c-format
msgid "Mouse type: %s\n"
msgstr "Type mus: %s\n"

#: ../Xconfigurator.pm_.c:658
#, c-format
msgid "Mouse device: %s\n"
msgstr "Enhet mus: %s\n"

#: ../Xconfigurator.pm_.c:659
#, c-format
msgid "Monitor: %s\n"
msgstr "Monitor: %s\n"

#: ../Xconfigurator.pm_.c:660
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Monitor HorizSync: %s\n"

#: ../Xconfigurator.pm_.c:661
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Monitor VertRefresh: %s\n"

#: ../Xconfigurator.pm_.c:662
#, c-format
msgid "Graphic card: %s\n"
msgstr "Grafikk-kort: %s\n"

#: ../Xconfigurator.pm_.c:663
#, c-format
msgid "Graphic memory: %s KB\n"
msgstr "Minne grafikk: %s KB\n"

#: ../Xconfigurator.pm_.c:664
#, c-format
msgid "XFree86 server: %s\n"
msgstr "XFree86 tjener: %s\n"

#: ../Xconfigurator.pm_.c:689
msgid "Change Monitor"
msgstr "Endre monitor"

#: ../Xconfigurator.pm_.c:690
msgid "Change Graphic card"
msgstr "Endre grafikk-kort"

#: ../Xconfigurator.pm_.c:691
msgid "Change Resolution"
msgstr "Endre oppløsning"

#: ../Xconfigurator.pm_.c:692
msgid "Automatical resolutions search"
msgstr "Automatisk oppløsningssøk"

#: ../Xconfigurator.pm_.c:696
msgid "Show information"
msgstr "Vis informasjon"

#: ../Xconfigurator.pm_.c:697
msgid "Test again"
msgstr "Test igjen"

#: ../Xconfigurator.pm_.c:698
msgid "Quit"
msgstr "Slutt"

#: ../Xconfigurator.pm_.c:701
msgid "What do you want to do?"
msgstr "Hva vil du gjøre?"

#: ../Xconfigurator.pm_.c:706
msgid "X at startup"
msgstr "X ved oppstart"

#: ../Xconfigurator.pm_.c:712
msgid "X successfully configured"
msgstr "Konfigurasjon av X vellykket"

#: ../Xconfigurator_consts.pm_.c:4
msgid "256 colors"
msgstr "256 farger"

#: ../Xconfigurator_consts.pm_.c:5
msgid "32 thousand colors"
msgstr "32 tusen farger"

#: ../Xconfigurator_consts.pm_.c:6
msgid "65 thousand colors"
msgstr "65 tusen farger"

#: ../Xconfigurator_consts.pm_.c:7
msgid "16 million colors"
msgstr "16 millioner farger"

#: ../Xconfigurator_consts.pm_.c:8
msgid "4 billion colors"
msgstr "4 milliarder farger"

#: ../Xconfigurator_consts.pm_.c:39
msgid "256 kb"
msgstr "256 kb"

#: ../Xconfigurator_consts.pm_.c:40
msgid "512 kb"
msgstr "512 kb"

#: ../Xconfigurator_consts.pm_.c:41
msgid "1 mb"
msgstr "1 mb"

#: ../Xconfigurator_consts.pm_.c:42
msgid "2 mb"
msgstr "2 mb"

#: ../Xconfigurator_consts.pm_.c:43
msgid "4 mb"
msgstr "4 mb"

#: ../Xconfigurator_consts.pm_.c:44
msgid "8 mb"
msgstr "8 mb"

#: ../Xconfigurator_consts.pm_.c:45
msgid "16 mb or more"
msgstr "16 mb eller mer"

#: ../Xconfigurator_consts.pm_.c:49 ../Xconfigurator_consts.pm_.c:50
msgid "Standard VGA, 640x480 at 60 Hz"
msgstr "Standard VGA, 640x480 i 60 Hz"

#: ../Xconfigurator_consts.pm_.c:51
msgid "Super VGA, 800x600 at 56 Hz"
msgstr "Super VGA 800x600 i 56 Hz"

#: ../Xconfigurator_consts.pm_.c:52
msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
msgstr "8514 kompatibel, 1024x768 i 87 Hz interlaced (ikke 800x600)"

#: ../Xconfigurator_consts.pm_.c:53
msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
msgstr "Super VGA, 1024x768 i 87 Hz interlaced, 800x600 i 56 Hz"

#: ../Xconfigurator_consts.pm_.c:54
msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
msgstr "Utvidet Super VGA, 800x600 i 60 Hz, 640x480 i 72 Hz"

#: ../Xconfigurator_consts.pm_.c:55
msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
msgstr "Ikke-interlaced SVGA, 1024x768 i 60 Hz, 800x600 i 72 Hz"

#: ../Xconfigurator_consts.pm_.c:56
msgid "High Frequency SVGA, 1024x768 at 70 Hz"
msgstr "Høyfrekvens SVGA, 1024x768 i 70 Hz"

#: ../Xconfigurator_consts.pm_.c:57
msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
msgstr "Flerfrekvens som kan klare 1280x1024 i 60 Hz"

#: ../Xconfigurator_consts.pm_.c:58
msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
msgstr "Flerfrekvens som kan klare 1280x1024 i 74 Hz"

#: ../Xconfigurator_consts.pm_.c:59
msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
msgstr "Flerfrekvens som kan klare 1280x1024 i 76 Hz"

#: ../Xconfigurator_consts.pm_.c:60
msgid "Monitor that can do 1600x1200 at 70 Hz"
msgstr "Monitor som kan klare 1600x1200 i 70 Hz"

#: ../Xconfigurator_consts.pm_.c:61
msgid "Monitor that can do 1600x1200 at 76 Hz"
msgstr "Monitor som kan klare 1600x1200 i 76 Hz"

#: ../Xconfigurator_consts.pm_.c:92
msgid "No RAMDAC Setting (recommended)"
msgstr "Ingen RAMDAC innstilling (anbefalt)"

#: ../Xconfigurator_consts.pm_.c:93
msgid "AT&T 20C490 (S3 and AGX servers, ARK driver)"
msgstr "AT&T 20C490 (S3 og AGX tjenere, ARK driver)"

#: ../Xconfigurator_consts.pm_.c:94
msgid "AT&T 20C498/21C498/22C498 (S3, autodetected)"
msgstr "AT&T 20C498/21C498/22C498 (S3, oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:95
msgid "AT&T 20C409/20C499 (S3, autodetected)"
msgstr "AT&T 20C409/20C499 (S3, oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:96
msgid "AT&T 20C505 (S3)"
msgstr "AT&T 20C505 (S3)"

#: ../Xconfigurator_consts.pm_.c:97
msgid "BrookTree BT481 (AGX)"
msgstr "BrookTree BT481 (AGX)"

#: ../Xconfigurator_consts.pm_.c:98
msgid "BrookTree BT482 (AGX)"
msgstr "BrookTree BT482 (AGX)"

#: ../Xconfigurator_consts.pm_.c:99
msgid "BrookTree BT485/9485 (S3)"
msgstr "BrookTree BT485/9485 (S3)"

#: ../Xconfigurator_consts.pm_.c:100
msgid "Sierra SC15025 (S3, AGX)"
msgstr "Sierra SC15025 (S3, AGX)"

#: ../Xconfigurator_consts.pm_.c:101
msgid "S3 GenDAC (86C708) (autodetected)"
msgstr "S3 GenDAC (86C708) (oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:102
msgid "S3 SDAC (86C716) (autodetected)"
msgstr "S3 SDAC (86C716) (oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:103
msgid "STG-1700 (S3, autodetected)"
msgstr "STG-1700 (S3, oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:104
msgid "STG-1703 (S3, autodetected)"
msgstr "STG-1703 (S3, oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:105
msgid "TI 3020 (S3)"
msgstr "TI 3020 (S3)"

#: ../Xconfigurator_consts.pm_.c:106
msgid "TI 3025 (S3, autodetected)"
msgstr "TI 3025 (S3, oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:107
msgid "TI 3026 (S3, autodetected)"
msgstr "TI 3026 (S3, oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:108
msgid "IBM RGB 514 (S3, autodetected)"
msgstr "IBM RGB 514 (S3, oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:109
msgid "IBM RGB 524 (S3, autodetected)"
msgstr "IBM RGB 524 (S3, oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:110
msgid "IBM RGB 525 (S3, autodetected)"
msgstr "IBM RGB 525 (S3, oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:111
msgid "IBM RGB 526 (S3)"
msgstr "IBM RGB 526 (S3)"

#: ../Xconfigurator_consts.pm_.c:112
msgid "IBM RGB 528 (S3, autodetected)"
msgstr "IBM RGB 528 (S3, oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:113
msgid "ICS5342 (S3, ARK)"
msgstr "ICS5342 (S3, ARK)"

#: ../Xconfigurator_consts.pm_.c:114
msgid "ICS5341 (W32)"
msgstr "ICS5341 (W32)"

#: ../Xconfigurator_consts.pm_.c:115
msgid "IC Works w30C516 ZoomDac (ARK)"
msgstr "IC Works w30C516 ZoomDac (ARK)"

#: ../Xconfigurator_consts.pm_.c:116
msgid "Normal DAC"
msgstr "Normal DAC"

#: ../Xconfigurator_consts.pm_.c:120
msgid "No Clockchip Setting (recommended)"
msgstr "Ingen Clockchip innstilling (anbefalt)"

#: ../Xconfigurator_consts.pm_.c:121
msgid "Chrontel 8391"
msgstr "Chrontel 8391"

#: ../Xconfigurator_consts.pm_.c:122
msgid "ICD2061A and compatibles (ICS9161A => DCS2824)"
msgstr "ICD2061A og kompatible (ICS9161A => DCS2824)"

#: ../Xconfigurator_consts.pm_.c:123
msgid "ICS2595"
msgstr "ICS2595"

#: ../Xconfigurator_consts.pm_.c:124
msgid "ICS5342 (similar to SDAC, but not completely compatible)"
msgstr "ICS5342 (lik SDAC, men ikke helt kompatibel)"

#: ../Xconfigurator_consts.pm_.c:125
msgid "ICS5341"
msgstr "ICS5341"

#: ../Xconfigurator_consts.pm_.c:126
msgid "S3 GenDAC (86C708) and ICS5300 (autodetected)"
msgstr "S3 GenDAC (86C708) og ICS5300 (oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:127
msgid "S3 SDAC (86C716)"
msgstr "S3 SDAC (86C716)"

#: ../Xconfigurator_consts.pm_.c:128
msgid "STG 1703 (autodetected)"
msgstr "STG 1703 (oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:129
msgid "Sierra SC11412"
msgstr "Sierra SC11412"

#: ../Xconfigurator_consts.pm_.c:130
msgid "TI 3025 (autodetected)"
msgstr "TI 3025 (oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:131
msgid "TI 3026 (autodetected)"
msgstr "TI 3026 (oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:132
msgid "IBM RGB 51x/52x (autodetected)"
msgstr "IBM RGB 51x/52x (oppdaget automatisk)"

#: ../diskdrake.pm_.c:15
msgid "Create"
msgstr "Opprett"

#: ../diskdrake.pm_.c:16
msgid "Unmount"
msgstr "Demonter"

#: ../diskdrake.pm_.c:17
msgid "Delete"
msgstr "Slett"

#: ../diskdrake.pm_.c:17
msgid "Format"
msgstr "Formater"

#: ../diskdrake.pm_.c:17 ../diskdrake.pm_.c:374
msgid "Move"
msgstr "Flytt"

#: ../diskdrake.pm_.c:17 ../diskdrake.pm_.c:427
msgid "Resize"
msgstr "Endre størrelse"

#: ../diskdrake.pm_.c:17
msgid "Type"
msgstr "Type"

#: ../diskdrake.pm_.c:18
msgid "Mount_point"
msgstr "Monteringspunkt"

#: ../diskdrake.pm_.c:31
msgid "Write /etc/fstab"
msgstr "Skriv /etc/fstab"

#: ../diskdrake.pm_.c:32
msgid "Normal > Expert"
msgstr "Normal > Ekspert"

#: ../diskdrake.pm_.c:33
msgid "Expert > Normal"
msgstr "Ekspert > Normal"

#: ../diskdrake.pm_.c:34
msgid "Restore from file"
msgstr "Gjenopprett fra fil"

#: ../diskdrake.pm_.c:35
msgid "Save in file"
msgstr "Lagre i fil"

#: ../diskdrake.pm_.c:36
msgid "Restore from floppy"
msgstr "Gjenopprett fra diskett"

#: ../diskdrake.pm_.c:37
msgid "Save on floppy"
msgstr "Lagre på diskett"

#: ../diskdrake.pm_.c:38
msgid "Done"
msgstr "Ferdig"

#: ../diskdrake.pm_.c:41
msgid "Clear all"
msgstr "Fjern alle"

#: ../diskdrake.pm_.c:42
msgid "Format all"
msgstr "Formater alle"

#: ../diskdrake.pm_.c:43
msgid "Auto allocate"
msgstr "Automatisk allokering"

#: ../diskdrake.pm_.c:46
msgid "All primary partitions are used"
msgstr "Alle primære partisjoner er i bruk"

#: ../diskdrake.pm_.c:46
msgid "I can't add any more partition"
msgstr "Jeg kan ikke legge til flere partisjoner"

#: ../diskdrake.pm_.c:46
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"For å ha flere partisjoner vennligst slett en for å kunne opprette en "
"utvidet partisjon"

#: ../diskdrake.pm_.c:49
#, fuzzy
msgid "Rescue partition table"
msgstr "Skriv partisjonstabell"

#: ../diskdrake.pm_.c:50
msgid "Undo"
msgstr "Angre"

#: ../diskdrake.pm_.c:51
msgid "Write partition table"
msgstr "Skriv partisjonstabell"

#: ../diskdrake.pm_.c:119
#, c-format
msgid "After %s partition %s,"
msgstr "Etter %s partisjon %s,"

#: ../diskdrake.pm_.c:119 ../diskdrake.pm_.c:365 ../diskdrake.pm_.c:392
msgid "Read carefully!"
msgstr "Les nøye!"

#: ../diskdrake.pm_.c:119
msgid "all data on this partition will be lost"
msgstr "alle data på denne partisjonen vil gå tapt"

#: ../diskdrake.pm_.c:137 ../install2.pm_.c:259 ../install_steps.pm_.c:65
#: ../install_steps_interactive.pm_.c:36
msgid "Error"
msgstr "Feil"

#: ../diskdrake.pm_.c:158 ../diskdrake.pm_.c:504
msgid "Mount point: "
msgstr "Monteringspunkt: "

#: ../diskdrake.pm_.c:159 ../diskdrake.pm_.c:181
msgid "Device: "
msgstr "Enhet: "

#: ../diskdrake.pm_.c:160
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS diskbokstav: %s (bare en gjetning)\n"

#: ../diskdrake.pm_.c:161 ../diskdrake.pm_.c:184
msgid "Type: "
msgstr "Type: "

#: ../diskdrake.pm_.c:162
#, c-format
msgid "Start: sector /*%s\n"
msgstr "Start: sektor /*%s\n"

#: ../diskdrake.pm_.c:163
msgid "Size: %s MB (%s%%)"
msgstr "Størrelse: %s MB (%s%%)"

#: ../diskdrake.pm_.c:164
#, c-format
msgid ", %s sectors"
msgstr ", %s sektorer"

#: ../diskdrake.pm_.c:166
#, c-format
msgid "Cylinder %d to cylinder %d\n"
msgstr "Sylinder %d til sylinder %d\n"

#: ../diskdrake.pm_.c:167
msgid "Formatted\n"
msgstr "Formatert\n"

#: ../diskdrake.pm_.c:168
msgid "Not formatted\n"
msgstr "Ikke formatert\n"

#: ../diskdrake.pm_.c:169
msgid "Mounted\n"
msgstr "Montert\n"

#: ../diskdrake.pm_.c:170
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Partisjon startet opp som standard\n"
"    (for MS-DOS oppstart, ikke for lilo)\n"

#: ../diskdrake.pm_.c:182
#, c-format
msgid "Size: %d MB\n"
msgstr "Størrelse: %d MB\n"

#: ../diskdrake.pm_.c:183
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Geometri: %s sylindere, %s hoder, %s sektorer\n"

#: ../diskdrake.pm_.c:185
#, c-format
msgid "on bus %d id %d\n"
msgstr "på buss %d id %d\n"

#: ../diskdrake.pm_.c:197
msgid "Mount"
msgstr "Monter"

#: ../diskdrake.pm_.c:199
msgid "Active"
msgstr "Aktiv"

#: ../diskdrake.pm_.c:305
msgid "Leave without saving"
msgstr "Avslutt uten å lagre"

#: ../diskdrake.pm_.c:305
msgid "Quit program without writing the partition table?"
msgstr "Avslutt programmet uten å skrive partisjonstabellen?"

#: ../diskdrake.pm_.c:320
msgid "changing type of"
msgstr "endrer type av"

#: ../diskdrake.pm_.c:322
msgid "Change partition type"
msgstr "Endre partisjonstype"

#: ../diskdrake.pm_.c:323
msgid "Which partition type do you want?"
msgstr "Hvilken partisjonstype ønsker du?"

#: ../diskdrake.pm_.c:338
msgid "Mount point"
msgstr "Monteringspunkt"

#: ../diskdrake.pm_.c:359
msgid "formatting"
msgstr "formatering"

#: ../diskdrake.pm_.c:365
msgid "After formatting all partitions,"
msgstr "Etter formatering av alle partisjonene"

#: ../diskdrake.pm_.c:365
msgid "all data on these partitions will be lost"
msgstr "alle data på disse partisjonene vil gå tapt"

#: ../diskdrake.pm_.c:375
msgid "Which disk do you want to move to?"
msgstr "Hvilken disk vil du flytte til?"

#: ../diskdrake.pm_.c:379
msgid "Sector"
msgstr "Sektor"

#: ../diskdrake.pm_.c:380
msgid "Which sector do you want to move to?"
msgstr "Hvilken sektor vil du flytte til?"

#: ../diskdrake.pm_.c:383
msgid "Moving"
msgstr "Flytter"

#: ../diskdrake.pm_.c:383
msgid "Moving partition..."
msgstr "Flytter partisjon..."

#: ../diskdrake.pm_.c:392
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "Partisjonstabellen på disk %s blir nå skrevet til disk!"

#: ../diskdrake.pm_.c:394
msgid "You'll need to reboot before the modification can take place"
msgstr "Du må starte maskinen på nytt for at modifiseringene skal tre i kraft"

#: ../diskdrake.pm_.c:413
msgid "Computing fat filesystem bounds"
msgstr "Beregner fat filsystemgrense"

#: ../diskdrake.pm_.c:413 ../diskdrake.pm_.c:455 ../interactive_gtk.pm_.c:201
msgid "Resizing"
msgstr "Endrer størrelse"

#: ../diskdrake.pm_.c:424
msgid "resizing"
msgstr "endrer størrelse"

#: ../diskdrake.pm_.c:434
msgid "Choose the new size"
msgstr "Velg ny størrelse"

#: ../diskdrake.pm_.c:434
msgid "MB"
msgstr "MB"

#: ../diskdrake.pm_.c:481
msgid "Create a new partition"
msgstr "Opprette en ny partisjon"

#: ../diskdrake.pm_.c:497
msgid "Start sector: "
msgstr "Start sektor: "

#: ../diskdrake.pm_.c:500
msgid "Size in MB: "
msgstr "Størrelse i MB: "

#: ../diskdrake.pm_.c:503
msgid "Filesystem type: "
msgstr "Filsystemtype: "

#: ../diskdrake.pm_.c:505
msgid "Preference: "
msgstr "Valg: "

#: ../diskdrake.pm_.c:547 ../diskdrake.pm_.c:563
msgid "Select file"
msgstr "Velg fil"

#: ../diskdrake.pm_.c:564
msgid "Warning"
msgstr "Advarsel"

#: ../diskdrake.pm_.c:579
#, fuzzy
msgid "Searching for your lost partition table"
msgstr "Skriv partisjonstabell"

#: ../fs.pm_.c:69 ../fs.pm_.c:75
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s formatering av %s mislykket"

#: ../fs.pm_.c:94
#, c-format
msgid "don't know how to format %s in type %s"
msgstr "Vet ikke hvordan formatere %s i type %s"

#: ../fs.pm_.c:107
msgid "nfs mount failed"
msgstr "nfs montering mislykket"

#: ../fs.pm_.c:124
msgid "mount failed: "
msgstr "montering mislykket: "

#: ../fs.pm_.c:134
#, c-format
msgid "error unmounting %s: %s"
msgstr "feil ved demontering av %s: %s"

#: ../fsedit.pm_.c:49
#, c-format
msgid "An error occurred while getting the geometry of block device %s: %s"
msgstr "En feil oppsto ved henting av geometrien til blokkenhet %s: %s"

#: ../fsedit.pm_.c:128
msgid "Mount points must begin with a leading /"
msgstr "Monteringspunkter må begynne med /"

#: ../fsedit.pm_.c:131
#, c-format
msgid "There is already a partition with mount point %s"
msgstr "Det finnes allerede en partisjon med monteringspunkt %s"

#: ../fsedit.pm_.c:255
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "Feil ved åpning av %s for skriving: %s"

#: ../help.pm_.c:7 ../help.pm_.c:145
msgid "Choose preferred language for install and system usage."
msgstr "Velg ønsket språk for installering og bruk på systemet."

#: ../help.pm_.c:10 ../help.pm_.c:148
msgid "Choose on the list of keyboards, the one corresponding to yours"
msgstr "Velg på listen over tastatur det som stemmer overens med ditt"

#: ../help.pm_.c:13 ../help.pm_.c:151
msgid ""
"Choose \"Installation\" if there are no previous versions of Linux\n"
"installed, or if you wish use to multiple distributions or versions.\n"
"\n"
"Choose \"Update\" if you wish to update a previous version of Mandrake\n"
"Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) or 6.0 (Venus)."
msgstr ""
"Velg \"Installasjon\" hvis det ikke er installert noen tidligere versjoner\n"
"av Linux, eller hvis du ønsker å bruke flere distribusjoner eller\n"
"versjoner.\n"
"\n"
"Velg \"Oppdater\" hvis du ønsker å oppdatere en tidligere versjon av\n"
"Mandrake Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) eller 6.0\n"
"(Venus)."

#: ../help.pm_.c:20 ../help.pm_.c:158
msgid ""
"Select:\n"
"  - Beginner: If you have not installed Linux before, or wish to install\n"
"the distribution elected \"Product of the year\" for 1999, click here.\n"
"  - Developer: If you are familiar with Linux and will be using the\n"
"computer primarily for software development, you will find happiness\n"
"here.\n"
"  - Server: If you wish to install a general purpose server, or the\n"
"Linux distribution elected \"Distribution/Server\" for 1999, select\n"
"this.\n"
"  - Expert: If you know GNU/Linux and want to perform a highly\n"
"customized installation, this Install Class is for you."
msgstr ""
"Velg:\n"
"  - Nybegynner: Hvis du ikke har installert Linux før, eller ønsker\n"
"å installere distribusjonen valgt til \"Product of the year\" for 1999,\n"
"klikk her.\n"
"  - Utvikler: hvis du kjent med Linux og primært vil bruke datamaskinen\n"
"din til å utvikle programvare vil du finne lykken her.\n"
"  - Tjener: Hvis du ønsker å installere en tjener, eller Linux-\n"
"distribusjonen valgt til \"Distribution/Server\" for 1999, velg denne.\n"
"  - Ekspert: Hvis du allerede kjenner GNU/Linux og ønsker å gjøre en\n"
"egendefinert installasjon, så er dette installasjonsvalget for deg."

#: ../help.pm_.c:33 ../help.pm_.c:171
msgid ""
"The system did not detect a SCSI card. If you have one (or several)\n"
"click on \"Yes\" and choose the module(s) to be tested. Otherwise, \n"
"select \"No\".\n"
"\n"
"If you don't know if your computer has SCSI interfaces, consult the\n"
"original documentation delivered with the computer, or if you use\n"
"Microsoft Windows 95/98, inspect the information available via the "
"\"Control\n"
"panel\", \"System's icon, \"Device Manager\" tab."
msgstr ""
"Systemet fant ikke et SCSI-kort. Hvis du har ett (eller flere) klikk på\n"
"\"Ja\" og velg modul(er) som skal testes. Hvis ikke, velg \"Nei\".\n"
"\n"
"Hvis du ikke vet om maskinen din har SCSI grensesnitt, se i dokumentasjonen\n"
"levert med datamaskinen din, eller hvis du bruker Windows 95/98, sjekk\n"
"informasjonen tilgjengelig under \"Kontrollpanel\", \"System\", \"Enhets-\n"
"behandling\"."

#: ../help.pm_.c:43 ../help.pm_.c:181
msgid ""
"At this point, hard drive partitions must be defined. (Unless you\n"
"are overwriting a previous install of Linux and have already defined\n"
"your hard drives partitions as desired.) This operation consists of\n"
"logically dividing the computer's hard drive capacity into separate\n"
"areas for use. Two common partition are: \"root\" which is the point at\n"
"which the filesystem's directory structure starts, and \"boot\", which\n"
"contains those files necessary to start the operating system when the\n"
"computer is first turned on. Because the effects of this process are\n"
"usually irreversible, partitioning can be intimidating and stressful to\n"
"the inexperienced. DiskDrake simplifies the process so that it need not\n"
"be. Consult the documentation and take your time before proceeding."
msgstr ""
"På dette punktet må hard-disk partisjoner defineres. (Hvis du ikke\n"
"overskriver en tidligere installasjon av Linux og allerede har definert\n"
"hard-disk partisjonene dine som ønsket.) Denne operasjonen innebærer å\n"
"logisk dele maskinens hard-disk kapasitet i separate områder for bruk.\n"
"To vanlige partisjoner er: \"root\" som er punktet hvor filsystemets\n"
"katalogstruktur starter, og \"boot\", som inneholder de filer som er\n"
"nødvendige for å starte operativsystemet når datamaskinen blir slått\n"
"på. Fordi effekten av denne prosessen vanligvis er ugjenkallelig kan\n"
"partisjonering være både stressende og skremmende for uerfarne brukere.\n"
"DiskDrake forenkler prosessen så den ikke trenger å være det. Les\n"
"dokumentasjonen og ta deg god tid før du begynner."

#: ../help.pm_.c:56 ../help.pm_.c:194
msgid ""
"Any partitions that have been newly defined must be formatted for\n"
"use. At this time, you may wish to re-format some pre-existing\n"
"partitions to erase the data they contain. Note: it is not necessary to\n"
"re-format pre-existing partitions, particularly if they contain files or\n"
"data you wish to keep. Typically retained are: /home and /usr/local."
msgstr ""
"Alle partisjonene som har blitt definert må formateres for bruk.På dette\n"
"punktet ønsker du kanskje å formatere noen eksisterende partisjoner for\n"
"å slette de data disse inneholder. Merk: det er ikke nødvendig å formatere\n"
"eksisterende partisjoner, især hvis de inneholder filer eller data som du\n"
"ønsker å beholde. Typiske å beholde: /home og / usr/local."

#: ../help.pm_.c:63 ../help.pm_.c:201
msgid ""
"You may now select the packages you wish to install.\n"
"\n"
"Please note that some packages require the installation of others. These\n"
"are referred to as package dependencies. The packages you select, and\n"
"the packages they require will automatically be added to the\n"
"installation configuration. It is impossible to install a package\n"
"without installing all of its dependencies.\n"
"\n"
"Information on each category and specific package is available in the\n"
"area titled \"Info\". This is located above the buttons: [confirmation]\n"
"[selection] [unselection]."
msgstr ""
"Du kan nå velge de pakkene du ønsker å installere.\n"
"\n"
"Vennligst merk at noen pakker er avhengige av installasjon av andre pakker.\n"
"Disse blir referert til som pakkeavhengigheter. Pakkene du velger, og\n"
"pakkene disse trenger vil automatisk bli lagt til i installasjons-\n"
"konfigurasjonen. Det er umulig å installere en pakke uten å installere\n"
"alle dens avhengigheter.\n"
"\n"
"Informasjon om hver kategori og spesifikke pakker er tilgjengelig i området\n"
"kalt \"Info\" over knappene: [bekreftelse] [valg] [fjern valg]."

#: ../help.pm_.c:76 ../help.pm_.c:214
msgid ""
"The packages selected are now being installed. This operation\n"
"should only take a few minutes."
msgstr ""
"Pakkene som er valgt blir nå installert. Denne operasjonen bare ta\n"
"noen få minutter."

#: ../help.pm_.c:80 ../help.pm_.c:83 ../help.pm_.c:86 ../help.pm_.c:89
#: ../help.pm_.c:92 ../help.pm_.c:124 ../help.pm_.c:139 ../help.pm_.c:218
#: ../help.pm_.c:221 ../help.pm_.c:224 ../help.pm_.c:227 ../help.pm_.c:230
#: ../help.pm_.c:262 ../help.pm_.c:277 ../install2.pm_.c:63
msgid "Help"
msgstr "Hjelp"

#: ../help.pm_.c:95 ../help.pm_.c:233
msgid ""
"An administrator password for your Linux system must now be\n"
"assigned. The password must be entered twice to verify that both\n"
"password entries are identical.\n"
"\n"
"Choose this password carefully. Only persons with access to an\n"
"administrator account can maintain and administer the system.\n"
"Alternatively, unauthorized use of an administrator account can be\n"
"extremely dangerous to the integrity of the system, the data upon it,\n"
"and other systems with which it is interfaced. The password should be a\n"
"mixture of alphanumeric characters and a least 8 characters long. It\n"
"should never be written down. Do not make the password too long or\n"
"complicated that it will be difficult to remember.\n"
"\n"
"When you login as Administrator, at \"login\" type \"root\" and at\n"
"\"password\", type the password that was created here."
msgstr ""
"Et administrator-passord for Linux-systemet ditt må nå tildeles.\n"
"Passordet må skrives to ganger for å verifisere at begge passord-\n"
"inntastingene er identiske.\n"
"\n"
"Velg dette passordet med forsiktighet. Bare personer med tilgang til\n"
"en administrator-konto kan vedlikeholde og administrere systemet.\n"
"Alternativt, ikke-autorisert bruk av en administrator-konto kan være\n"
"ekstremt farlig for integriteten til systemet, dataene det inneholder,\n"
"og andre system som grenser til dette. Passordet bør være en miks av\n"
"alfanumeriske tegn og være minst åtte tegn langt. Passordet bør heller\n"
"ikke bli skrevet ned. Ikke lag passordet for langt eller for komplisert\n"
"da vil bli vanskelig å huske.\n"
"\n"
"Når du logger inn som administrator, ved \"login\" skriv \"root\" og ved\n"
"\"password\", skriv passordet som ble opprettet her."

#: ../help.pm_.c:112 ../help.pm_.c:250
msgid ""
"You can now authorize one or more people to use your Linux\n"
"system. Each user account will have their own customizable environment.\n"
"\n"
"It is very important that you create a regular user account, even if \n"
"there will only be one principle user of the system. The administrative\n"
"\"root\" account should not be used for day to day operation of the\n"
"computer.  It is a security risk.  The use of a regular user account\n"
"protects you and the system from yourself. The root account should only\n"
"be used for administrative and maintenance tasks that can not be\n"
"accomplished from a regular user account."
msgstr ""
"Du kan nå autorisere en eller flere personer som kan bruke Linux-\n"
"systemet ditt. Hver brukerkonto vil ha sitt eget egendefinerbare miljø.\n"
"\n"
"Det er veldig viktig at du oppretter en vanlig brukerkonto, selv om det\n"
"bare vil være en bruker av systemet. Den administrative kontoen \"root\"\n"
"bør ikke brukes til vanlig bruk av maskinen. Dette er en sikkerhets-\n"
"risiko. Bruken av en vanlig brukerkonto vil beskytte både deg og systemet\n"
"mot deg selv. Root-kontoen bør kun brukes til administrering og vedlikehold\n"
"som ikke kan utføres fra en vanlig brukerkonto."

#: ../help.pm_.c:127 ../help.pm_.c:265
msgid ""
"You need to indicate where you wish\n"
"to place the information required to boot to Linux.\n"
"\n"
"Unless you know exactly what you are doing, choose \"First sector of\n"
"drive\"."
msgstr ""
"Du må indikere hvor du ønsker å\n"
"plassere informasjonen som behøves for oppstart av Linux.\n"
"\n"
"Med mindre du vet akkurat hva du gjør, velg \"Første sektor av\n"
"disken\"."

#: ../help.pm_.c:134 ../help.pm_.c:272
msgid ""
"It is now time to configure the video card and monitor\n"
"configuration for the X Window Graphic User Interface (GUI). First\n"
"select your monitor. Next, you may test the configuration and change\n"
"your selections if necessary."
msgstr ""
"Det er nå tid for å konfigurere skjermkort- og monitor-konfigurasjonen\n"
"for X Window Graphic User Interface (GUI). Velg først monitoren din.\n"
"Deretter kan du teste konfigurasjonen og endre dine valg hvis det er\n"
"nødvendig."

#: ../install2.pm_.c:37
msgid "Choose your language"
msgstr "Velg språk"

#: ../install2.pm_.c:38
msgid "Choose install or upgrade"
msgstr "Velg installering eller oppgradering"

#: ../install2.pm_.c:39
msgid "Select installation class"
msgstr "Velg installasjonsklasse"

#: ../install2.pm_.c:40
msgid "Configure mouse"
msgstr "Konfigurer mus"

#: ../install2.pm_.c:41
msgid "Choose your keyboard"
msgstr "Velg tastatur"

#: ../install2.pm_.c:42
msgid "Setup SCSI"
msgstr "Oppsett SCSI"

#: ../install2.pm_.c:43
msgid "Setup filesystems"
msgstr "Oppsett filsystemer"

#: ../install2.pm_.c:44
msgid "Format partitions"
msgstr "Formater partisjoner"

#: ../install2.pm_.c:45
msgid "Choose packages to install"
msgstr "Velg pakker for installering"

#: ../install2.pm_.c:46
msgid "Install system"
msgstr "Installer systemet"

#: ../install2.pm_.c:47
msgid "Configure networking"
msgstr "Konfigurer nettverk"

#: ../install2.pm_.c:48
msgid "Configure timezone"
msgstr "Konfigurer tidssone"

#: ../install2.pm_.c:50
msgid "Configure printer"
msgstr "Konfigurer skriver"

#: ../install2.pm_.c:51 ../install_steps_interactive.pm_.c:451
#: ../install_steps_interactive.pm_.c:452
msgid "Set root password"
msgstr "Sett root passord"

#: ../install2.pm_.c:52
msgid "Add a user"
msgstr "Legg til en bruker"

#: ../install2.pm_.c:53
msgid "Create bootdisk"
msgstr "Opprett oppstartdiskett"

#: ../install2.pm_.c:54
msgid "Install bootloader"
msgstr "Installer oppstartslaster"

#: ../install2.pm_.c:55
msgid "Configure X"
msgstr "Konfigurer X"

#: ../install2.pm_.c:56
msgid "Exit install"
msgstr "Gå ut av installering"

#: ../install2.pm_.c:75
msgid "beginner"
msgstr "nybegynner"

#: ../install2.pm_.c:75
msgid "developer"
msgstr "utvikler"

#: ../install2.pm_.c:75
msgid "expert"
msgstr "ekspert"

#: ../install2.pm_.c:75
msgid "server"
msgstr "tjener"

#: ../install2.pm_.c:270
msgid ""
"An error has occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"En feil har oppstått - ingen gyldige enheter ble funnet for å opprette nye "
"filsystemer. Vennligst sjekk maskinvaren din for årsaken til dette problemet"

#: ../install2.pm_.c:285
msgid "partitioning failed: no root filesystem"
msgstr "partisjonering feilet: intet root filsystem"

#: ../install2.pm_.c:420
msgid "Error reading file $f"
msgstr "Feil ved lesing av fil $f"

#: ../install2.pm_.c:425
#, c-format
msgid "Bad kickstart file %s (failed %s)"
msgstr "Dårlig kickstart fil %s (mislykket %s)"

#: ../install_steps.pm_.c:266
msgid "no floppy available"
msgstr "ingen diskett tilgjengelig"

#: ../install_steps_graphical.pm_.c:285
msgid "Hide"
msgstr "Gjem"

#: ../install_steps_graphical.pm_.c:285
msgid "Show All"
msgstr "Vis alle"

#: ../install_steps_graphical.pm_.c:289
msgid "Select All"
msgstr "Velg alle"

#: ../install_steps_graphical.pm_.c:289
msgid "Unselect All"
msgstr "Fjern alle"

#: ../install_steps_graphical.pm_.c:356
msgid "Choose the packages you want to install"
msgstr "Velg pakkene du ønsker å installere"

#: ../install_steps_graphical.pm_.c:367
msgid " Mb"
msgstr "Mb"

#: ../install_steps_graphical.pm_.c:367
msgid "Total size: "
msgstr "Total størrelse: "

#: ../install_steps_graphical.pm_.c:368
msgid "Info"
msgstr "Info"

#: ../install_steps_graphical.pm_.c:394
msgid "Installing"
msgstr "Installerer"

#: ../install_steps_graphical.pm_.c:400
msgid "Please wait, "
msgstr "Vennligst vent, "

#: ../install_steps_graphical.pm_.c:402
msgid "Time remaining "
msgstr "Tid som gjenstår "

#: ../install_steps_graphical.pm_.c:403
msgid "Total time "
msgstr "Total tid "

#: ../install_steps_graphical.pm_.c:408
msgid "preparing installation"
msgstr "forbereder installasjon"

#: ../install_steps_graphical.pm_.c:429
#, c-format
msgid "installing package %s"
msgstr "installerer pakke %s"

#: ../install_steps_graphical.pm_.c:542 ../interactive.pm_.c:47
#: ../interactive.pm_.c:57 ../my_gtk.pm_.c:183 ../my_gtk.pm_.c:328
#: ../my_gtk.pm_.c:412
msgid "Ok"
msgstr "Ok"

#: ../install_steps_interactive.pm_.c:36
msgid "An error occurred"
msgstr "En feil oppsto"

#: ../install_steps_interactive.pm_.c:52
msgid "Which language do you want?"
msgstr "Hvilket språk ønsker du?"

#: ../install_steps_interactive.pm_.c:63
msgid "Which keyboard do you have?"
msgstr "Hvilket tastatur har du?"

#: ../install_steps_interactive.pm_.c:73
msgid "Install/Upgrade"
msgstr "Installer/Oppgrader"

#: ../install_steps_interactive.pm_.c:74
msgid "Is this an install or an upgrade?"
msgstr "Er dette en installasjon eller en oppgradering?"

#: ../install_steps_interactive.pm_.c:75
msgid "Install"
msgstr "Installer"

#: ../install_steps_interactive.pm_.c:75
msgid "Upgrade"
msgstr "Oppgrader"

#: ../install_steps_interactive.pm_.c:84
msgid "Install Class"
msgstr "Installeringsklasse"

#: ../install_steps_interactive.pm_.c:85
msgid "What type of user will you have?"
msgstr "Hva slags brukertype vil du ha?"

#: ../install_steps_interactive.pm_.c:96
msgid "Which mouse do you have"
msgstr "Hvilket mus har du?"

#: ../install_steps_interactive.pm_.c:100
msgid "Emulate third button"
msgstr ""

#: ../install_steps_interactive.pm_.c:103
msgid "Mouse Port"
msgstr ""

#: ../install_steps_interactive.pm_.c:104
msgid "Which serial port is your mouse connected to?"
msgstr ""

#: ../install_steps_interactive.pm_.c:114
msgid "You need to reboot for the partition table modifications to take place"
msgstr ""
"Du må starte maskinen på nytt for at modifiseringene av partisjonstabellen "
"skal tre i kraft"

#: ../install_steps_interactive.pm_.c:124
msgid "Choose the partitions you want to format"
msgstr "Velg de partisjonene du ønsker å formatere"

#: ../install_steps_interactive.pm_.c:135
#, c-format
msgid "Formatting partition %s"
msgstr "Formaterer partisjon %s"

#: ../install_steps_interactive.pm_.c:143
msgid "Searching for available packages"
msgstr ""

#: ../install_steps_interactive.pm_.c:154
msgid "Keep the current IP configuration"
msgstr "Behold nåværende IP-konfigurasjon"

#: ../install_steps_interactive.pm_.c:155
msgid "Reconfigure network now"
msgstr "Rekonfigurer nettverket nå"

#: ../install_steps_interactive.pm_.c:156
msgid "Don't set up networking"
msgstr "Ikke sett opp nettverk"

#: ../install_steps_interactive.pm_.c:158
#: ../install_steps_interactive.pm_.c:164
msgid "Network Configuration"
msgstr "Nettverks-konfigurasjon"

#: ../install_steps_interactive.pm_.c:159
msgid "LAN networking has already been configured. Do you want to:"
msgstr "LAN-nettverket har allerede blitt konfigurert. Vil du:"

#: ../install_steps_interactive.pm_.c:165
msgid ""
"Do you want to configure LAN (not dialup) networking for your installed "
"system?"
msgstr ""
"Vil du konfigurere LAN (ikke oppringt) nettverk for ditt installerte system?"

#: ../install_steps_interactive.pm_.c:270
msgid "Standard Printer Options"
msgstr "Standard skriveropsjoner"

#: ../install_steps_interactive.pm_.c:271
msgid ""
"Every print queue (which print jobs are directed to) needs a \n"
"name (often lp) and a spool directory associated with it. What \n"
"name and directory should be used for this queue?"
msgstr ""
"Hver skriverkø (som skrivejobber sendes til) trenger et navn \n"
"(ofte lp) og en spolingskatalog assosiert til denne. Hvilket \n"
"navn og katalog skal brukes for denne køen?"

#: ../install_steps_interactive.pm_.c:274
msgid "Name of queue:"
msgstr "Køens navn:"

#: ../install_steps_interactive.pm_.c:274
msgid "Spool directory:"
msgstr "Spolingskatalog:"

#: ../install_steps_interactive.pm_.c:285
msgid "Select Printer Connection"
msgstr "Velg skrivertilkobling"

#: ../install_steps_interactive.pm_.c:286
msgid "How is the printer connected?"
msgstr "Hvordan er skriveren tilkoblet?"

#: ../install_steps_interactive.pm_.c:294
msgid "Detecting devices..."
msgstr "Finner enheter..."

#: ../install_steps_interactive.pm_.c:294
msgid "Test ports"
msgstr "Test porter"

#: ../install_steps_interactive.pm_.c:307
#, c-format
msgid "I have detected a %s on "
msgstr ""

#: ../install_steps_interactive.pm_.c:314
msgid "Local Printer Device"
msgstr "Lokal skriverenhet"

#: ../install_steps_interactive.pm_.c:315
msgid ""
"What device is your printer connected to  \n"
"(note that /dev/lp0 is equivalent to LPT1:)?\n"
msgstr ""
"Hvilken enhet er skriveren din koblet til  \n"
"(merk at /dev/lp0 er det samme som LPT1:)?\n"

#: ../install_steps_interactive.pm_.c:316
msgid "Printer Device:"
msgstr "Skriverenhet:"

#: ../install_steps_interactive.pm_.c:322
msgid "Remote lpd Printer Options"
msgstr "Fjern-lpd skriveropsjoner"

#: ../install_steps_interactive.pm_.c:323
msgid ""
"To use a remote lpd print queue, you need to supply \n"
"the hostname of the printer server and the queue name \n"
"on that server which jobs should be placed in."
msgstr ""
"For å bruke fjern-lpd skriverkø, må du oppgi vertsnavnet \n"
"til skrivertjeneren og kønavnet til den tjeneren \n"
"som jobbene skal plasseres i."

#: ../install_steps_interactive.pm_.c:326
msgid "Remote hostname:"
msgstr "Fjern-brukernavn"

#: ../install_steps_interactive.pm_.c:326
msgid "Remote queue:"
msgstr "Fjern-kø"

#: ../install_steps_interactive.pm_.c:332
msgid "SMB/Windows 95/NT Printer Options"
msgstr "SMB/Windows 95/NT skriveropsjoner"

#: ../install_steps_interactive.pm_.c:333
msgid ""
"To print to a SMB printer, you need to provide the \n"
"SMB host name (this is not always the same as the machines \n"
"TCP/IP hostname) and possibly the IP address of the print server, as \n"
"well as the share name for the printer you wish to access and any \n"
"applicable user name, password, and workgroup information."
msgstr ""
"For å skrive til en SMB skriver, må du oppgi SMB vertsnavnet \n"
"(dette er ikke alltid det samme som maskinens TCP/IP vertsnavn) \n"
"og muligens IP-adressen til skrivertjeneren, så vel som det delte \n"
"navnet til skriveren du ønsker tilgang til og anvendelige brukernavn, \n"
"passord, og arbeidsgruppeinformasjon."

#: ../install_steps_interactive.pm_.c:338
msgid "SMB server IP:"
msgstr "SMB-tjener IP:"

#: ../install_steps_interactive.pm_.c:338
msgid "SMB server host:"
msgstr "SMB-tjener vert:"

#: ../install_steps_interactive.pm_.c:339
#: ../install_steps_interactive.pm_.c:361
msgid "Password:"
msgstr "Passord:"

#: ../install_steps_interactive.pm_.c:339
msgid "Share name:"
msgstr "Delt navn:"

#: ../install_steps_interactive.pm_.c:339
#: ../install_steps_interactive.pm_.c:361
msgid "User name:"
msgstr "Brukernavn:"

#: ../install_steps_interactive.pm_.c:340
msgid "Workgroup:"
msgstr "Arbeidsgruppe:"

#: ../install_steps_interactive.pm_.c:347
msgid "IP address should be in format 1.2.3.4"
msgstr "IP-adresse bør være i format 1.2.3.4"

#: ../install_steps_interactive.pm_.c:355
msgid "NetWare Printer Options"
msgstr "NetWare skriveropsjoner"

#: ../install_steps_interactive.pm_.c:356
msgid ""
"To print to a NetWare printer, you need to provide the \n"
"NetWare print server name (this is not always the same as the machines \n"
"TCP/IP hostname) as well as the print queue name for the printer you \n"
"wish to access and any applicable user name and password."
msgstr ""
"For å skrive til en NetWare skriver, må du oppgi navnet til NetWare \n"
"skrivertjeneren (dette er ikke alltid det samme som maskinens TCP/IP \n"
"vertsnavn) så vel som navnet på skriverkøen til skriveren du ønsker \n"
"adgang til og anvendelige brukernavn og passord."

#: ../install_steps_interactive.pm_.c:360
msgid "Print Queue Name:"
msgstr "Skriverkø navn:"

#: ../install_steps_interactive.pm_.c:360
msgid "Printer Server:"
msgstr "Skrivertjener:"

#: ../install_steps_interactive.pm_.c:371
msgid "Configure Printer"
msgstr "Konfigurer skriver"

#: ../install_steps_interactive.pm_.c:372
msgid "What type of printer do you have?"
msgstr "Hva slags type skriver har du?"

#: ../install_steps_interactive.pm_.c:383
#: ../install_steps_interactive.pm_.c:384
msgid "Paper Size"
msgstr "Papirstørrelse"

#: ../install_steps_interactive.pm_.c:403
msgid "CRLF"
msgstr "CRLF"

#: ../install_steps_interactive.pm_.c:404
msgid "Fix stair-stepping of text?"
msgstr "Fiks trappesteging av tekst?"

#: ../install_steps_interactive.pm_.c:420
msgid "Configure Uniprint Driver"
msgstr "Konfigurer Uniprint-driver"

#: ../install_steps_interactive.pm_.c:421
msgid "You may now configure the uniprint options for this printer."
msgstr "Du kan nå konfigurere uniprint-opsjonene for denne skriveren."

#: ../install_steps_interactive.pm_.c:429
msgid "Configure Color Depth"
msgstr "Konfigurer fargedybde"

#: ../install_steps_interactive.pm_.c:430
msgid "You may now configure the color options for this printer."
msgstr "Du kan nå konfigurere fargeopsjonene for denne skriveren."

#: ../install_steps_interactive.pm_.c:453
#: ../install_steps_interactive.pm_.c:478
msgid "Password"
msgstr "Passord"

#: ../install_steps_interactive.pm_.c:453
#: ../install_steps_interactive.pm_.c:478
msgid "Password (again)"
msgstr "Passord (igjen)"

#: ../install_steps_interactive.pm_.c:457
#: ../install_steps_interactive.pm_.c:489
msgid "Please try again"
msgstr "Vennligst prøv igjen"

#: ../install_steps_interactive.pm_.c:457
#: ../install_steps_interactive.pm_.c:489
msgid "You must enter the same password"
msgstr "Du må skrive inn det samme passordet"

#: ../install_steps_interactive.pm_.c:458
msgid "This password is too simple"
msgstr "Dette passordet er for enkelt"

#: ../install_steps_interactive.pm_.c:476
msgid "Add user"
msgstr "Legg til bruker"

#: ../install_steps_interactive.pm_.c:477
msgid "Enter a user"
msgstr "Entre en bruker"

#: ../install_steps_interactive.pm_.c:478
msgid "Real name"
msgstr "Virkelig navn"

#: ../install_steps_interactive.pm_.c:478
msgid "Shell"
msgstr "Skall"

#: ../install_steps_interactive.pm_.c:478
msgid "User name"
msgstr "Brukernavn"

#: ../install_steps_interactive.pm_.c:491
msgid "Please give a user name"
msgstr "Vennligst oppgi et brukernavn"

#: ../install_steps_interactive.pm_.c:492
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "Brukernavnet kan kun inneholde små bokstaver, tall, `-' og `_'"

#: ../install_steps_interactive.pm_.c:511
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"lilo on your system, or another operating system removes lilo, or lilo "
"doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures. Would you like to create a bootdisk for your system?"
msgstr ""
"En egendefinert oppstartsdiskett er en måte å starte Linux-systemet på uten\n"
"å være avhengig av den vanlige oppstartslasteren. Dette er nyttig hvis du\n"
"ikke ønsker å installere lilo på systemet ditt, eller et annet \n"
"operativsystem fjerner lilo, eller at lilo ikke virker med din \n"
"maskinvarekonfigurasjon. En egendefinert oppstartsdiskett kan også brukes\n"
"sammen med Mandrake's redningsbilde, som gjør det mye lettere gjenopprette\n"
"etter systemsvikt. Ønsker du å opprette en oppstartsdiskett for\n"
"systemet ditt?"

#: ../install_steps_interactive.pm_.c:519
msgid "Sorry, no floppy drive available"
msgstr "Beklager, ingen diskettstasjon tilgjengelig"

#: ../install_steps_interactive.pm_.c:522
msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr "Velg diskettstasjonen du ønsker å bruke for å lage oppstartsdisketten"

#: ../install_steps_interactive.pm_.c:527
#, c-format
msgid "Insert a floppy in drive %s"
msgstr "Sett inn en diskett i stasjon %s"

#: ../install_steps_interactive.pm_.c:528
msgid "Creating bootdisk"
msgstr "Oppretter oppstartdiskett"

#: ../install_steps_interactive.pm_.c:535
msgid "First sector of boot partition"
msgstr "Første sektor av oppstartspartisjon"

#: ../install_steps_interactive.pm_.c:535
msgid "First sector of drive"
msgstr "Første sektor av disk"

#: ../install_steps_interactive.pm_.c:538
msgid "Lilo Installation"
msgstr "Lilo-installasjon"

#: ../install_steps_interactive.pm_.c:539
msgid "Where do you want to install the bootloader?"
msgstr "Hvor vil du installere oppstartslasteren?"

#: ../install_steps_interactive.pm_.c:566
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"For information on fixes which are available for this release of Linux "
"Mandrake,\n"
"consult the Errata available from http://www.linux-mandrake.com/.\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Linux Mandrake User's Guide."
msgstr ""
"Gratulerer, installasjonen er fullført.\n"
"Fjern oppstartsmediet og press return for å starte på nytt.\n"
"For informasjon om fiks som er tilgjengelig for denne utgaven av Linux "
"Mandrake,\n"
"sjekk Errataen tilgjengelig fra http://www.linux-mandrake.com/.\n"
"Informasjon om konfigurering av systemet ditt finnes i post\n"
"install-kapittelet i Official Linux Mandrake User's Guide."

#: ../install_steps_interactive.pm_.c:583
#, c-format
msgid "What %s card have you?"
msgstr "Hvilket %s kort har du?"

#: ../install_steps_interactive.pm_.c:595
msgid "Autoprobe"
msgstr "Automatisk sondering"

#: ../install_steps_interactive.pm_.c:595
msgid "Specify options"
msgstr "Spesifiser opsjoner"

#: ../install_steps_interactive.pm_.c:608
msgid "Module options:"
msgstr "Modulopsjoner:"

#: ../install_steps_interactive.pm_.c:628
#, c-format
msgid "Installing driver for %s card %s"
msgstr "Installerer driver for %s kort %s"

#: ../install_steps_interactive.pm_.c:629
#, c-format
msgid "(module %s)"
msgstr "(modul %s)"

#: ../install_steps_interactive.pm_.c:641
#, c-format
msgid "Found %s %s interfaces"
msgstr "Fant %s %s grensesnitt"

#: ../install_steps_interactive.pm_.c:642
msgid "Do you have another one?"
msgstr "Har du enda ett?"

#: ../install_steps_interactive.pm_.c:643
#, c-format
msgid "Do you have an %s interface?"
msgstr "Har du et %s grensesnitt"

#: ../install_steps_interactive.pm_.c:645 ../interactive.pm_.c:52
#: ../my_gtk.pm_.c:327
msgid "No"
msgstr "Nei"

#: ../install_steps_interactive.pm_.c:645 ../interactive.pm_.c:52
#: ../my_gtk.pm_.c:327
msgid "Yes"
msgstr "Ja"

#: ../install_steps_interactive.pm_.c:646
msgid "See hardware info"
msgstr "Se maskinvareinfo"

#: ../install_steps_stdio.pm_.c:21
#, c-format
msgid "Starting step `%s'\n"
msgstr "Starter steg `%s'\n"

#: ../interactive.pm_.c:57 ../my_gtk.pm_.c:184 ../my_gtk.pm_.c:328
msgid "Cancel"
msgstr "Avbryt"

#: ../interactive.pm_.c:147
msgid "Please wait"
msgstr "Vennligst vent"

#: ../interactive_stdio.pm_.c:34
#, c-format
msgid "Ambiguity (%s), be more precise\n"
msgstr "Tvetydig (%s), vær mere presis\n"

#: ../interactive_stdio.pm_.c:35 ../interactive_stdio.pm_.c:50
#: ../interactive_stdio.pm_.c:69
msgid "Bad choice, try again\n"
msgstr "Dårlig valg, prøv igjen\n"

#: ../interactive_stdio.pm_.c:38
#, c-format
msgid " ? (default %s) "
msgstr " ? (standard %s) "

#: ../interactive_stdio.pm_.c:51
#, c-format
msgid "Your choice? (default %s) "
msgstr "Ditt valg? (standard %s) "

#: ../interactive_stdio.pm_.c:70
#, c-format
msgid "Your choice? (default %s  enter `none' for none) "
msgstr "Ditt valg? (standard %s  trykk `none' for ingen) "

#: ../keyboard.pm_.c:31
msgid "Belgian"
msgstr "Belgisk"

#: ../keyboard.pm_.c:32
msgid "Bulgarian"
msgstr "Bulgarisk"

#: ../keyboard.pm_.c:33
msgid "Czech"
msgstr "Tsjekkisk"

#: ../keyboard.pm_.c:34
msgid "German"
msgstr "Tysk"

#: ../keyboard.pm_.c:35
msgid "Danish"
msgstr "Dansk"

#: ../keyboard.pm_.c:36
msgid "Dvorak"
msgstr "Dvorak"

#: ../keyboard.pm_.c:37
msgid "Finnish"
msgstr "Finsk"

#: ../keyboard.pm_.c:38
msgid "French"
msgstr "Fransk"

#: ../keyboard.pm_.c:42
msgid "Greek"
msgstr "Gresk"

#: ../keyboard.pm_.c:43
msgid "Hungarian"
msgstr "Ungarsk"

#: ../keyboard.pm_.c:44
msgid "Israelian"
msgstr "Israelsk"

#: ../keyboard.pm_.c:45
msgid "Icelandic"
msgstr "Islansk"

#: ../keyboard.pm_.c:46
msgid "Italian"
msgstr "Italiensk"

#: ../keyboard.pm_.c:47
msgid "Latin American"
msgstr "Latinamerikansk"

#: ../keyboard.pm_.c:48
msgid "Dutch"
msgstr "Hollansk"

#: ../keyboard.pm_.c:49
msgid "Norwegian"
msgstr "Norsk"

#: ../keyboard.pm_.c:50
msgid "Polish"
msgstr "Polsk"

#: ../keyboard.pm_.c:51
msgid "Portuguese"
msgstr "Portugisisk"

#: ../keyboard.pm_.c:52
msgid "Canadian (Quebec)"
msgstr "Canadisk (Quebec)"

#: ../keyboard.pm_.c:53
msgid "Russian"
msgstr "Russisk"

#: ../keyboard.pm_.c:54
msgid "Swedish"
msgstr "Svensk"

#: ../keyboard.pm_.c:55
msgid "Swiss (french layout)"
msgstr "Sveisisk (fransk layout)"

#: ../keyboard.pm_.c:56
msgid "Swiss (german layout)"
msgstr "Sveisisk (tysk layout)"

#: ../keyboard.pm_.c:57
msgid "Slovenian"
msgstr "Slovensk"

#: ../keyboard.pm_.c:58
msgid "Slovakian"
msgstr "Slovakisk"

#: ../keyboard.pm_.c:61
msgid "Turkish (traditional \"F\" model)"
msgstr "Tyrkist (tradisjonell \"F\" modell)"

#: ../keyboard.pm_.c:62
msgid "Turkish (modern \"Q\" model)"
msgstr "Tyrkisk (moderne \"Q\" modell)"

#: ../keyboard.pm_.c:63
msgid "UK keyboard"
msgstr "UK tastatur"

#: ../keyboard.pm_.c:64
msgid "US keyboard"
msgstr "US tastatur"

#: ../keyboard.pm_.c:65
msgid "Yugoslavian (latin layout)"
msgstr "Jugoslavisk (latin layout)"

#: ../my_gtk.pm_.c:328
msgid "Is it ok?"
msgstr "Er det ok?"

#: ../partition_table.pm_.c:458
#, c-format
msgid "Error reading file %s"
msgstr "Feil ved lesing av fil %s"

#: ../partition_table.pm_.c:465
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Gjenoppretting fra fil %s mislykket: %s"

#: ../partition_table.pm_.c:467
msgid "Bad backup file"
msgstr "Dårlig backup-fil"

#: ../partition_table.pm_.c:487
#, c-format
msgid "Error writing to file %s"
msgstr "Feil ved skriving til fil %s"

#~ msgid ""
#~ "It is now time to configure the graphic server. First of all, choose your "
#~ "monitor. You have then\n"
#~ "the possibility of testing your configuration and of reconsidering your "
#~ "choices if the latter are not\n"
#~ "appropriate to you."
#~ msgstr ""
#~ "Det er nå tid for å konfigurere grafikk-tjeneren. Først, velg monitor. Du "
#~ "har så muligheten\n"
#~ "til å teste konfigurasjonen din og endre dine valg hvis disse valgene ikke "
#~ "passet for deg."

#~ msgid ""
#~ "You can now authorize one or more people to be connected on your Linux "
#~ "system. Each one of\n"
#~ "them will profit from his own environment will be able to configure.\n"
#~ "\n"
#~ "It is very important that you create at least one user even if you are the "
#~ "only person who will connect\n"
#~ "herself on this machine. Indeed, if runnig the system as \"root\" is "
#~ "attractive, that \n"
#~ "is a very bad idea. This last having all the rights it is certain that at "
#~ "one time you will broke all.\n"
#~ "This is highly preferable you connect as simple user and that you use the "
#~ "account \"root\" only when\n"
#~ "that is essential."
#~ msgstr ""
#~ "Du kan nå gi autorisasjon til å la en eller brukere logge seg på Linux- "
#~ "systemet ditt. Være av dem\n"
#~ "vil være i stand til å konfigurere sitt eget miljø.\n"
#~ "\n"
#~ "Det er veldig viktig at du oppretter minst en bruker selv om du er den "
#~ "eneste personen som vil\n"
#~ "bruke denne maskinen. Selv om det å kjøre systemet som \"root\" er "
#~ "attraktivt, så er det en \n"
#~ "veldig dårlig ide. Da denne har alle rettigheter er det sikkert at før eller "
#~ "senere vil du ødelegge alt.\n"
#~ "Det her høyt anbefalt at du logger deg på som vanlig bruker og kun bruker "
#~ "kontoen \"root\" når det er nødvendig."

#~ msgid ""
#~ "The system now requires an administrator password for your Linux system.\n"
#~ "This passwd is required of you by twice in order to being certain of its "
#~ "spelling.\n"
#~ "\n"
#~ "Choose it carefully because it mainly conditions the good functioning of "
#~ "your system.\n"
#~ "Indeed, only the administrator (also named \"root\") is able to configure "
#~ "the computer.\n"
#~ "The password should not be too simple so that whoever cannot be connected "
#~ "under this account.\n"
#~ "It should not be either too sophisticated under penalty of being difficult "
#~ "to retain and, finally, forgotten.\n"
#~ "\n"
#~ "When you wish to connect yourselves on your Linux system as an "
#~ "administrator, the \"login\" \n"
#~ "is \"root\" and the \"password\", this one which you now will indicate."
#~ msgstr ""
#~ "Systemet krever nå et administrator-passord for Linux-systemet ditt.\n"
#~ "Passordet må oppgis to ganger for å bekrefte at stavingen er riktig.\n"
#~ "\n"
#~ "Velg det med omhu fordi det i hovedsak bestemmer for godt systemet vil "
#~ "fungere.\n"
#~ "Også fordi bare administratoren (også kalt \"root\") er i stand til å "
#~ "konfigurere datamaskinen din.\n"
#~ "Passordet burde ikke være for enkelt så andre ikke kan logge seg på denne "
#~ "kontoen.\n"
#~ "Det burde heller ikke være for innviklet så det er vanskelig å huske, eller "
#~ "i verste fall bli glemt.\n"
#~ "\n"
#~ "Ønsker du å logge deg på Linux-systemet ditt som administrator, så er \"logg "
#~ "inn\" \n"
#~ "\"root\" og \"passord\", som du nå vil opprette."

#~ msgid ""
#~ "In this stage, you will must partion your hard disk. It consists in cutting "
#~ "your disk in several zones\n"
#~ "(which are not equal). This operation, for spectacular and intimidating that "
#~ "it is,\n"
#~ " is not hardly if you be carrefull so that you do. \n"
#~ "Also, take your time, are sure you before click on \"Finishing\" and READ "
#~ "the handbook of DiskDrake\n"
#~ "before use them."
#~ msgstr ""
#~ "På dette punktet må du partisjonere hard-disken din. Det består av å dele "
#~ "opp disken din i flere soner\n"
#~ "(som ikke er like). Denne operasjonen, uansett hvor spektakulært og "
#~ "skremmende det måtte være,\n"
#~ "så er det ikke vanskelig hvis du er forsiktig med det du gjør. \n"
#~ "Ta deg god tid, og vær sikker før du klikker på \"Ferdig\" og LES "
#~ "DiskDrake-håndboken\n"
#~ "før du begynner."

#~ msgid ""
#~ "Choose the language which you approved. This one govern the language's "
#~ "system."
#~ msgstr "Velg språket som du godkjente. Dette bestemmer språket på systemet."

#~ msgid "Configure services"
#~ msgstr "Konfigurer tjenester"

#~ msgid ""
#~ "You're adding a root partition far on the drive (on a cylinder > 1024),\n"
#~ "and you have no /boot partition. So if you plan to use lilo (the boot "
#~ "manager),\n"
#~ "be careful to add a /boot partition"
#~ msgstr ""
#~ "Du er i ferd med å legge til en rotpartisjon langt ute på disken (på en\n"
#~ "sylinder > 1024), og du har ingen /boot partisjon. Så hvis du planlegger å "
#~ "bruke lilo (oppstartshåndtereren), så være forsiktig når du legger til\n"
#~ "en /boot partisjon."

#~ msgid "Give your graphic card memory size"
#~ msgstr "Oppgi hvor mye minne grafikk-kortet ditt har"

#~ msgid "Found "
#~ msgstr "Funnet "

#~ msgid "Printer"
#~ msgstr "Skriver"

#~ msgid "DNS server:"
#~ msgstr "DNS-tjener:"

#~ msgid "Host name:"
#~ msgstr "Vertsnavn:"

#~ msgid "Configuring network"
#~ msgstr "Konfigurerer nettverk"

#~ msgid "Netmask:"
#~ msgstr "Nettmaske:"

#~ msgid "IP address:"
#~ msgstr "IP-adresse:"

#~ msgid "Configuring network device %s"
#~ msgstr "Konfigurerer nettverks-enhet %s"

#~ msgid "Where do you want to mount device %s?"
#~ msgstr "Hvor vil du montere %s enheten?"