# Korean translation of drakbootdisk. # Copyright (C) 2001 Free Software Foundation, Inc. # Jaegeum Choe , 2001. # # changes asked by HP people -- pablo 2003-01-23 # msgid "" msgstr "" "Project-Id-Version: DrakX\n" "POT-Creation-Date: 2003-09-16 13:45+0200\n" "PO-Revision-Date: 2002-09-09 09:08+0900\n" "Last-Translator: Jaegeum Cze \n" "Language-Team: Korean \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=euc-kr\n" "Content-Transfer-Encoding: 8bit\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Scanning partitions to find mount points" msgstr "마운트 위치를 찾기위해 파티션들을 검색 중" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, " "0/1 for Local Config...\n" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Configuration changed - restart clusternfs/dhcpd?" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t\tErase=%s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Differential backups only save files that have changed or are new since the " "original 'base' backup." msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "network printer port" msgstr "네트웍 프린터 (소켓)" #: ../../standalone/drakTermServ:1 #, c-format msgid "Please insert floppy disk:" msgstr "플로피를 넣어 주세요:" #: ../../standalone/drakTermServ:1 #, c-format msgid "DrakTermServ" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "PCMCIA" msgstr "PCMCIA" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "백업 파티션 테이블 크기가 같지 않습니다.\n" "계속 하시겠습니까?" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Which username" msgstr "사용할 아이디" #: ../../any.pm:1 #, c-format msgid "Which type of entry do you want to add?" msgstr "어떤 종류의 항목을 추가하시겠습니까?" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Restore partition table" msgstr "파티션 테이블 복구" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Configure hostname..." msgstr "마우스 설정" #: ../../printer/cups.pm:1 #, fuzzy, c-format msgid "On CUPS server \"%s\"" msgstr "CUPS 서버 IP" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Post-install configuration" msgstr "설치전 환경설정" #: ../../standalone/drakperm:1 #, c-format msgid "" "The current security level is %s\n" "Select permissions to see/edit" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``%s'' instead" msgstr "대신에 「%s」를 사용합니다" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Type" msgstr "유형" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" "\n" "또한 제조업체가 제공한 PPD 파일이나 CUPS 포함 드라이버로 설정된 프린터도 전송" "될 수 없습니다." #: ../../lang.pm:1 #, c-format msgid "Sri Lanka" msgstr "스리랑카" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "시스템 폰트 복사" #: ../../lang.pm:1 #, c-format msgid "Central African Republic" msgstr "중앙 아프리카 공화국" #: ../../network/network.pm:1 #, c-format msgid "Gateway device" msgstr "게이트웨이 장치" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "Advanced preferences" msgstr "고급 옵션" #: ../../standalone/drakbackup:1 #, c-format msgid "Net Method:" msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Ethernetcard" msgstr "이더넷 카드" #: ../../security/l10n.pm:1 #, c-format msgid "If set, send the mail report to this email address else send it to root" msgstr "" #: ../../modules/interactive.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Parameters" msgstr "인자" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "no" msgstr "정보" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Auto-detect" msgstr "자동 검색" #: ../../standalone/drakconnect:1 #, c-format msgid "Interface:" msgstr "인터페이스:" #: ../../steps.pm:1 #, c-format msgid "Select installation class" msgstr "설치 클래스 선택" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "" "The system doesn't seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" "시스템이 인터넷에 연결되지 않은 듯합니다.\n" "연결 설정을 다시해 보세요." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Belarus" msgstr "벨라루스" #: ../../partition_table.pm:1 #, c-format msgid "Error writing to file %s" msgstr "%s 파일에 쓰기 오류" #: ../../security/l10n.pm:1 #, c-format msgid "Report check result to syslog" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "apmd는 배터리 상태와 syslog를 거쳐서 로그 기록을 감시하는데 사용됩니다.\n" "또한 배터리량이 미약할때 자동으로 시스템을 셧다운 시켜주는 기능도 합니다." #: ../../standalone/drakbackup:1 #, c-format msgid "Use tape to backup" msgstr "테입을 사용한 백업" #: ../../install_steps_gtk.pm:1 #, c-format msgid "The following packages are going to be installed" msgstr "다음 팩키지들이 설치될 것입니다." #: ../../printer/printerdrake.pm:1 #, c-format msgid "CUPS configuration" msgstr "CUPS 설정" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Total progress" msgstr "전체 진행" #: ../../lang.pm:1 #, c-format msgid "Hong Kong" msgstr "홍콩" #: ../../install_interactive.pm:1 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "새로운 파티션을 만들 수 있는 공간이 부족합니다." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving" msgstr "이동 중" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "yes" msgstr "예" #: ../../printer/printerdrake.pm:1 #, c-format msgid "(" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Welcome to The Network Configuration Wizard.\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" "네트웍 설정 마법사에 잘 오셨습니다.\n" "\n" "지금 인터넷/네트웍 연결을 설정하려 합니다.\n" "자동 검색을 사용하고 싶지 않다면, 체크박스를 해제하세요.\n" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, c-format msgid ")" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Lebanon" msgstr "레바논" #: ../../mouse.pm:1 #, c-format msgid "MM HitTablet" msgstr "MM 히트타블렛" #: ../../services.pm:1 #, c-format msgid "Stop" msgstr "중지" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Edit selected host" msgstr "%s 발견" #: ../../standalone/drakbackup:1 #, c-format msgid "No CD device defined!" msgstr "CD 장치가 정의되지 않았습니다!" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "\tUse .backupignore files\n" msgstr "백업 파일에 쿼터 사용" #: ../../keyboard.pm:1 #, c-format msgid "Bulgarian (phonetic)" msgstr "불가리아 (음성학)" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP start ip" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "256 kB" msgstr "256 kB" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Don't rewind tape after backup" msgstr "테입을 사용한 백업" #: ../../any.pm:1 #, c-format msgid "Bootloader main options" msgstr "부트로더 주 옵션들" #: ../../standalone.pm:1 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" #: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Tape" msgstr "테입" #: ../../lang.pm:1 #, c-format msgid "Malaysia" msgstr "말레이시아" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Scanning network..." msgstr "네트웍 검색 중 ..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" #: ../../standalone/drakedm:1 #, fuzzy, c-format msgid "The change is done, do you want to restart the dm service ?" msgstr "팩키지 %s가 필요합니다. 설치하겠습니까?" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (French layout)" msgstr "스위스 (불어)" #: ../../standalone/drakbackup:1 #, c-format msgid "August" msgstr "팔월" #: ../../raid.pm:1 #, c-format msgid "mkraid failed (maybe raidtools are missing?)" msgstr "mkraid 실패 (raidtool이 설치되어 있지 않을 수 있습니다.)" #: ../../harddrake/data.pm:1 #, c-format msgid "Webcam" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "size of the (second level) cpu cache" msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Soundcard" msgstr "사운드 카드" #: ../../standalone/drakbackup:1 #, c-format msgid "Month" msgstr "한달씩" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Search for files to restore" msgstr "다른 복구 매체 선택" #: ../../lang.pm:1 #, c-format msgid "Luxembourg" msgstr "룩셈부르크" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" "명령행(터미널 윈도우)에서 파일을 인쇄하려면, 「%s <파일>」명령을 사용하세" "요.\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Level %s\n" msgstr "%s 등급\n" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Syriac (phonetic)" msgstr "미국 (음성학)" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Iran" msgstr "이라크" #: ../../standalone/harddrake2:1 #, c-format msgid "Bus" msgstr "버스" #: ../../lang.pm:1 #, c-format msgid "Iraq" msgstr "이라크" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "connecting to %s ..." msgstr "버질라 마법사에 연결 중 ..." #: ../../standalone/drakgw:1 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "현재 설정 %s에서 잠재적인 랜 주소 충돌이 발견됩니다!\n" #: ../../standalone/drakgw:1 #, c-format msgid "Configuring..." msgstr "설정 중..." #: ../../standalone/drakgw:1 #, c-format msgid "The setup has already been done, and it's currently enabled." msgstr "설정이 이미 완료되었으며, 현재 허용된 상태입니다." #: ../../harddrake/v4l.pm:1 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Password (again)" msgstr "암호 (확인)" #: ../../standalone/drakfont:1 #, c-format msgid "Search installed fonts" msgstr "설치된 폰트 검색" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Default desktop" msgstr "기본값" #: ../../standalone/drakbug:1 #, c-format msgid "" "To submit a bug report, click on the button report.\n" "This will open a web browser window on %s\n" " where you'll find a form to fill in. The information displayed above will " "be \n" "transferred to that server." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Venezuela" msgstr "베네수엘라" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakconnect:1 #, c-format msgid "IP address" msgstr "IP 주소" #: ../../install_interactive.pm:1 #, c-format msgid "Choose the sizes" msgstr "크기 선택" #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data corrupted:\n" "\n" msgstr "" #: ../../fs.pm:1 #, c-format msgid "" "Can only be mounted explicitly (i.e.,\n" "the -a option will not cause the file system to be mounted)." msgstr "" #: ../../network/modem.pm:1 #, c-format msgid "" "Your modem isn't supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose another partition" msgstr "추가 파티션 선택" #: ../../standalone/drakperm:1 #, c-format msgid "Current user" msgstr "현재 사용자" #: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Username" msgstr "사용자명" #: ../../keyboard.pm:1 #, c-format msgid "Left \"Windows\" key" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Guyana" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "dhcpd Server Configuration" msgstr "고급 설정" #: ../../standalone/drakperm:1 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Printer Name" msgstr "프린트 큐 이름" #: ../../standalone/drakfloppy:1 #, c-format msgid "Remove a module" msgstr "모듈 제거" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakconnect:1 #, c-format msgid "Password" msgstr "암호" #: ../../standalone/drakbackup:1 #, c-format msgid "Advanced Configuration" msgstr "고급 설정" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Scanning on your HP multi-function device" msgstr "" #: ../../any.pm:1 #, c-format msgid "Root" msgstr "루트" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose an existing RAID to add to" msgstr "추가할 기존 RAID를 선택하세요." #: ../../keyboard.pm:1 #, c-format msgid "Turkish (modern \"Q\" model)" msgstr "터키 (현대 「Q」모델" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo message not found" msgstr "릴로 메시지를 찾을 수 없습니다." #: ../../services.pm:1 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" "「/usr/include/linux/{autoconf,version}.h」에 대해\n" "「/boot」에 커널 헤더를 자동 생성." #: ../../standalone/drakfloppy:1 #, c-format msgid "if needed" msgstr "부팅시 적재 모듈이 있을 경우에만 이미지 생성" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Failed..." msgstr "복구 실패..." #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/Autodetect _jazz drives" msgstr "자동 검색됨" #: ../../standalone/drakbackup:1 #, c-format msgid "Store the password for this system in drakbackup configuration." msgstr "" #: ../../install_messages.pm:1 #, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Default user" msgstr "기본 프린터" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Current interface configuration" msgstr "현재 인터페이스 설정 보기" #: ../../printer/data.pm:1 #, c-format msgid "LPD - Line Printer Daemon" msgstr "LPD - Line Printer Daemon" #: ../../network/isdn.pm:1 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "만약 ISA 카드를 가지고 있다면, 다음 화면에서 설정값이 정확해야 합니다.\n" "\n" "만약 PCMCIA 카드를 가지고 있다면, IRQ와 IO 값을 알고 있어야 합니다.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do not print any test page" msgstr "시험 페이지 인쇄 안함" #: ../../keyboard.pm:1 #, c-format msgid "Gurmukhi" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s already in use\n" msgstr "" #: ../../any.pm:1 #, c-format msgid "Force No APIC" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "이 암호는 너무 단순합니다.( 적어도 %d 글자는 넘어야 합니다)" #: ../../standalone.pm:1 #, fuzzy, c-format msgid "[keyboard]" msgstr "키보드" #: ../../network/network.pm:1 #, c-format msgid "FTP proxy" msgstr "FTP 프락시" #: ../../standalone/drakfont:1 #, c-format msgid "Install List" msgstr "설치 목록" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Change\n" "Restore Path" msgstr "" "복구 경로\n" "수정" #: ../../standalone/logdrake:1 #, c-format msgid "Show only for the selected day" msgstr "선택된 날짜에 대해만 보이기" #: ../../standalone/drakbackup:1 #, c-format msgid "\tLimit disk usage to %s MB\n" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "512 kB" msgstr "512 kB" #: ../../standalone/net_monitor:1 #, c-format msgid "Logs" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "N" msgstr "N" #: ../../network/isdn.pm:1 #, c-format msgid "What kind of card do you have?" msgstr "어떤 종유의 카드를 가지고 있습니까?" #: ../../standalone/logdrake:1 #, c-format msgid "O" msgstr "O" #: ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, c-format msgid "Security" msgstr "보안" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "Q" msgstr "Q" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Unable to find backups to restore...\n" msgstr "복구할 데이터를 선택하세요..." #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Unknown" msgstr "알 수없는 모델" #: ../../printer/printerdrake.pm:1 #, c-format msgid "This server is already in the list, it cannot be added again.\n" msgstr "" #: ../../network/netconnect.pm:1 ../../network/tools.pm:1 #, c-format msgid "Network Configuration" msgstr "네트웍 환경 설정" #: ../../standalone/logdrake:1 #, c-format msgid "S" msgstr "S" #: ../../network/isdn.pm:1 #, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "다른 지역을 위한 프로토콜\n" " D채널 (leased lines) 아님" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - /etc/xinetd.d/tftp:\n" " \tdrakTermServ will configure this file to work in conjunction with " "the images created\n" " \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to \n" " \teach diskless client.\n" "\n" " \tA typical tftp configuration file looks like:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \tThe changes here from the default installation are changing the " "disable flag to\n" " \t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \tputs its images." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be a number!" msgstr "%s 옵션은 숫자이어야 합니다!" #: ../../standalone/drakboot:1 ../../standalone/draksplash:1 #, c-format msgid "Notice" msgstr "주의" #: ../../install_steps_interactive.pm:1 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The configuration of the printer will work fully automatically. If your " "printer was not correctly detected or if you prefer a customized printer " "configuration, turn on \"Manual configuration\"." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "What type of partitioning?" msgstr "어떤 유형의 파티션입니까?" #: ../../standalone/drakbackup:1 #, c-format msgid "" "file list sent by FTP: %s\n" " " msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Interface" msgstr "인터페이스" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Multisession CD" msgstr "멀티미디어 스테이션" #: ../../modules/parameters.pm:1 #, c-format msgid "comma separated strings" msgstr "쉼표 분리 문자열들" #: ../../standalone/scannerdrake:1 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Messages" msgstr "메시지" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "POP and IMAP Server" msgstr "POP and IMAP 서버" #: ../../lang.pm:1 #, c-format msgid "Mexico" msgstr "멕시코" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Model stepping" msgstr "설정 읽기" #: ../../lang.pm:1 #, c-format msgid "Rwanda" msgstr "르완다" #: ../../lang.pm:1 #, c-format msgid "Switzerland" msgstr "스위스" #: ../../lang.pm:1 #, c-format msgid "Brunei Darussalam" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have any %s interfaces?" msgstr "또 다른 %s 인터페이스가 설치되어 있습니까?" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "You must be root to read configuration file. \n" msgstr "지금 설정 파일로부터 백업" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote lpd Printer Options" msgstr "원격 LPD 프린터 옵션" #: ../../help.pm:1 #, c-format msgid "" "GNU/Linux is a multi-user system, meaning each user may have their own\n" "preferences, their own files and so on. You can read the ``Starter Guide''\n" "to learn more about multi-user systems. But unlike \"root\", who is the\n" "system administrator, the users you add at this point will not be\n" "authorized to change anything except their own files and their own\n" "configurations, protecting the system from unintentional or malicious\n" "changes that impact on the system as a whole. You will have to create at\n" "least one regular user for yourself -- this is the account which you should\n" "use for routine, day-to-day use. Although it is very easy to log in as\n" "\"root\" to do anything and everything, it may also be very dangerous! A\n" "very simple mistake could mean that your system will not work any more. If\n" "you make a serious mistake as a regular user, the worst that will happen is\n" "that you will lose some information, but not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you typed in this field and copy it to the \"%s\" field, which is the name\n" "this user will enter to log onto the system. If you like, you may override\n" "the default and change the username. The next step is to enter a password.\n" "From a security point of view, a non-privileged (regular) user password is\n" "not as crucial as the \"root\" password, but that is no reason to neglect\n" "it by making it blank or too simple: after all, your files could be the\n" "ones at risk.\n" "\n" "Once you click on \"%s\", you can add other users. Add a user for each one\n" "of your friends: your father or your sister, for example. Click \"%s\" when\n" "you have finished adding users.\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\" for\n" "that user (bash by default).\n" "\n" "When you have finished adding users, you will be asked to choose a user\n" "that can automatically log into the system when the computer boots up. If\n" "you are interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click \"%s\".\n" "If you are not interested in this feature, uncheck the \"%s\" box." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Configure Internet Access..." msgstr "인터넷 접근 설정..." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please choose the time interval between each backup" msgstr "" "백업간 시간 간격을\n" "선택하세요." #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Norway" msgstr "노르웨이" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Delete profile" msgstr "프로파일 지우기" #: ../../keyboard.pm:1 #, c-format msgid "Danish" msgstr "덴마크" #: ../../services.pm:1 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" "부팅시에 자동으로 콘솔과 X 환경에서\n" "숫자키 잠금 모드 사용." #: ../../network/network.pm:1 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "이 시스템을 위한 IP 설정을 입력해 주세요.\n" "각각의 항목은「.」으로 구분된 십진수 IP 주소로 입력해야 합니다.\n" "(예, 1.2.3.4)" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM so it will eject\n" "the current CD and ask you to insert the correct CD as required." msgstr "" "맨드레이크 리눅스 설치 시스템은 여러 장의 CD로 구성되어 있습니다.\n" "드레이크X는 선택된 각각의 팩키지가 어느 CD에 들어 있는지 이미 알고 있습니" "다.\n" "필요시 현재 CD를 자동으로 꺼내고 다른 CD의 삽입을 요청할 것입니다." #: ../../standalone/drakperm:1 #, c-format msgid "When checked, owner and group won't be changed" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Bulgaria" msgstr "불가리아" #: ../../standalone/drakbackup:1 #, c-format msgid "Tuesday" msgstr "화요일" #: ../../harddrake/data.pm:1 #, c-format msgid "Processors" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "No NIC selected!" msgstr "네트웍 카드가 선택 안됨!" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Problems occured during configuration.\n" "Test your connection via net_monitor or mcc. If your connection doesn't " "work, you might want to relaunch the configuration." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "partition %s is now known as %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Other files..." msgstr "다른 파일 백업..." #: ../../lang.pm:1 #, c-format msgid "Congo (Kinshasa)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB server IP" msgstr "SMB 서버 IP" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "%s 드라이브의 파티션 테이블을 저장합니다." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing HPOJ package..." msgstr "팩키지 설치 중..." #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?\n" "%s" msgstr "" "부트 디스크는 일반적인 부트로더를 사용하지 않고, 리눅스 시스템으로 부팅하는\n" "방법을 제공합니다. 만약 LILO(또는 Grub)를 사용하지 않거나, 다른 운영체제가\n" "LILO를 제거하거나 또는 LILO가 하드웨어 설정과 맞지 않을 때, 유용합니다.\n" "부트 디스크는 또한 맨드레이크 복구 이미지와 함께 사용되어 심각한\n" "시스템 문제를 쉽게 복구할 수 있습니다. 님의 시스템을 위한 부트 디스크를\n" "만드시겠습니까?\n" "%s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Latvian" msgstr "라트바아" #: ../../standalone/drakbackup:1 #, c-format msgid "monthly" msgstr "매월" #: ../../standalone/drakfloppy:1 #, c-format msgid "Module name" msgstr "모듈 이름" #: ../../network/network.pm:1 #, c-format msgid "Start at boot" msgstr "부팅시 시작" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Incremental Backups" msgstr "" #: ../../any.pm:1 #, c-format msgid "First sector of drive (MBR)" msgstr "드라이브의 첫번째 섹터(MBR)" #: ../../lang.pm:1 #, c-format msgid "El Salvador" msgstr "엘 살바도르" #: ../../harddrake/data.pm:1 #, c-format msgid "Joystick" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "DVD" msgstr "" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Use Unicode by default" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Trying to rescue partition table" msgstr "파티션 테이블 복구 시도 중..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be an integer number!" msgstr "%s 옵션은 정수 번호이어야 합니다!" #: ../../security/l10n.pm:1 #, c-format msgid "Use password to authenticate users" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "For backups to other media, files are still created on the hard drive, then " "moved to the other media. Enabling this option will remove the hard drive " "tar files after the backup." msgstr "" #: ../../standalone/livedrake:1 #, c-format msgid "Unable to start live upgrade !!!\n" msgstr "라이브 업그레이드를 시작할 수 없습니다!!! \n" #: ../../install_steps_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Name: " msgstr "이름:" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "16 million colors (24 bits)" msgstr "천6백만 색상 (24bits)" #: ../../any.pm:1 #, c-format msgid "Allow all users" msgstr "모든 사용자 허용" #: ../../share/advertising/08-store.pl:1 #, c-format msgid "The official MandrakeSoft Store" msgstr "" #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Resizing" msgstr "크기변경" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Enter the maximum size\n" " allowed for Drakbackup (MB)" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Cable connection" msgstr "캐이블 연결" #: ../../standalone/drakperm:1 ../../standalone/logdrake:1 #, c-format msgid "User" msgstr "사용자" #: ../../standalone/drakbackup:1 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Name" msgstr "이름:" #: ../../raid.pm:1 #, c-format msgid "mkraid failed" msgstr "mkraid 실패" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 3 Emulation" msgstr "버튼 3 에뮬레이션" #: ../../security/l10n.pm:1 #, c-format msgid "Check additions/removals of sgid files" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Sending files..." msgstr "파일 전송 중 ..." #: ../../keyboard.pm:1 #, c-format msgid "Israeli (Phonetic)" msgstr "이스라엘 (음성학)" #: ../../any.pm:1 #, c-format msgid "access to rpm tools" msgstr "RPM 도구 액세스" #: ../../printer/printerdrake.pm:1 #, c-format msgid "You must choose/enter a printer/device!" msgstr "프린터 또는 장치를 입력 또는 선택해야 합니다!" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission problem accessing CD." msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Phone number" msgstr "전화 번호" #: ../../harddrake/sound.pm:1 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer name, description, location" msgstr "프린터 이름, 설명, 위치" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (broadcast)" msgstr "미국 (공중파)" #: ../../Xconfig/card.pm:1 #, c-format msgid "Use Xinerama extension" msgstr "Xinerama 확장 사용" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback" msgstr "루프백" #: ../../standalone/drakxtv:1 #, c-format msgid "West Europe" msgstr "서유럽" #: ../../standalone/drakbackup:1 #, c-format msgid "On CD-R" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrake tools\n" " --incident - program should be one of mandrake tools" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Harddrake2 version %s" msgstr "하드 드레이크 2 버전 %s" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "Preferences" msgstr "사용자 정의" #: ../../lang.pm:1 #, c-format msgid "Swaziland" msgstr "스와질란드" #: ../../lang.pm:1 #, c-format msgid "Dominican Republic" msgstr "도미니카 공화국" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Copying %s" msgstr "%s 복사 중" #: ../../standalone/draksplash:1 #, c-format msgid "Choose color" msgstr "색상 선택" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Syriac" msgstr "수리남" #: ../../standalone/drakperm:1 #, c-format msgid "Set-UID" msgstr "UID 설정" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data present on this partition\n" "will be lost and will not be recoverable!" msgstr "" "맨드레이크 리눅스 파티션을 만들기 위해서 삭제할 하드디스클르 선택하세요.\n" "주의:\n" "디스크상의 모든 데이터는 손실되며, 영원히 복구가 불가능해 집니다!" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Generic 2 Button Mouse" msgstr "일반적인 2버튼 마우스" #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to execute the file" msgstr "" #: ../../lvm.pm:1 #, c-format msgid "Remove the logical volumes first\n" msgstr "논리 볼륨을 먼저 제거해 주세요.\n" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't write /etc/sysconfig/bootsplash\n" "File not found." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Internet access" msgstr "인터넷 액세스" #: ../../standalone/draksplash:1 #, c-format msgid "" "y coordinate of text box\n" "in number of characters" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" "현재 프린터에 사용할 수 있는 옵션 목록을 보려면, 「인쇄 옵션 목록」을 누르세" "요.\n" "\n" #: ../../standalone/drakgw:1 #, c-format msgid "Enabling servers..." msgstr "서버 허용 중" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing test page(s)..." msgstr "시험 페이지 인쇄 중..." #: ../../fsedit.pm:1 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "마운트 위치 %s가 이미 존재합니다.\n" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable msec hourly security check." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "At this point, you need to decide where you want to install the Mandrake\n" "Linux operating system on your hard drive. If your hard drive is empty or\n" "if an existing operating system is using all the available space you will\n" "have to partition the drive. Basically, partitioning a hard drive consists\n" "of logically dividing it to create the space needed to install your new\n" "Mandrake Linux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to lost data if there is an existing operating system already\n" "installed on the drive, partitioning can be intimidating and stressful if\n" "you are an inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on your hard drive configuration, several options are available:\n" "\n" " * \"%s\": this option will perform an automatic partitioning of your blank\n" "drive(s). If you use this option there will be no further prompts.\n" "\n" " * \"%s\": the wizard has detected one or more existing Linux partitions on\n" "your hard drive. If you want to use them, choose this option. You will then\n" "be asked to choose the mount points associated with each of the partitions.\n" "The legacy mount points are selected by default, and for the most part it's\n" "a good idea to keep them.\n" "\n" " * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n" "all the space available on it, you will have to create free space for\n" "Linux. To do so, you can delete your Microsoft Windows partition and data\n" "(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n" "partition. Resizing can be performed without the loss of any data, provided\n" "you have previously defragmented the Windows partition and that it uses the\n" "FAT format. Backing up your data is strongly recommended.. Using this\n" "option is recommended if you want to use both Mandrake Linux and Microsoft\n" "Windows on the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "then when you started. You will have less free space under Microsoft\n" "Windows to store your data or to install new software.\n" "\n" " * \"%s\": if you want to delete all data and all partitions present on\n" "your hard drive and replace them with your new Mandrake Linux system,\n" "choose this option. Be careful, because you will not be able to undo your\n" "choice after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"%s\": this will simply erase everything on the drive and begin fresh,\n" "partitioning everything from scratch. All data on your disk will be lost.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"%s\": choose this option if you want to manually partition your hard\n" "drive. Be careful -- it is a powerful but dangerous choice and you can very\n" "easily lose all your data. That's why this option is really only\n" "recommended if you have done something like this before and have some\n" "experience. For more instructions on how to use the DiskDrake utility,\n" "refer to the ``Managing Your Partitions '' section in the ``Starter\n" "Guide''." msgstr "" "이제 하드디스크의 어디에 리눅스 맨드레이크를 설치할지를\n" "선택해야 합니다. 만약 하드디스크가 완전히 비어 있거나 또는\n" "다른 운영체제가 하드디스크 전체를 점유하고 있다면, 파티션을\n" " 나누어야 합니다. 파티션을 나눈다함은 리눅스 맨드레이크가\n" "설치될 공간을 확보하기 위하여 디스크를 논리적으로 분할한다는 의미입니다.\n" "\n" "일반적으로 파티션 과정을 거쳐 버리면 기존 데이터의 복구가 불가능해지기\n" "때문에,초보자에게는 고민스럽고 걱정스러운 작업입니다. 하지만 마법사를\n" "사용하면 이 작업을 쉽게 할 수 있습니다. 시작하기 전에, 충분한 시간을 가지고\n" "사용자 설명서를 읽어 보세요.\n" "\n" "현재 전문가 모드로 설치를 진행 중이라면, 리눅스 맨드레이크의 파티션 분할 도구" "인\n" "디스크드레이크를 만나게 될 것입니다. 이 도구는 파티션드르이 세밀한 조정을 가" "능하게\n" "합니다. 설명서의 디스크드레이크 장을 보세요; 사용법이 동일합니다. 위에서 언급" "했듯이\n" "화면에 있는 「마법사」버튼을 눌러서, 파티션 분할 작업을 위한 마법사를\n" "실행할 수도 있습니다.\n" "\n" "만약 이전에 리눅스를 설치한 적이 있거나 다른 파티션 도구로 만들어 놓은 리눅스" "용\n" "파티션들이 이미 존재한다면, 리눅스 설치에 사용할 파티션들을\n" "선택만 하면 됩니다.\n" "\n" "만약 아직 리눅스용 파티션이 없다면, 새로 만들어야 합니다. 그러기 위해서는\n" "위에 있는 마법사를 사용하세요. 하드디스크의 설정에 따라 다음과 같은\n" "몇 가지의 방법이 있습니다:\n" "\n" " ○ 빈 공간 사용: 빈 디스크의 자동 파티션 분할 작업을 하게 됩니다.\n" "파티션 분할 작업에 대해 더 이상 신경쓸 필요가 없게 됩니다.\n" "\n" " ○ 기존 파티션 사용: 마법사가 기존의 리눅스 파티션을 발견한 경우입니다.\n" "기존의 파티션에다가 리눅스를 설치할려면, 이것을 선택하세요.\n" "\n" " ○ 윈도우즈 파티션의 빈 공간 사용: 만약 MS 윈도우즈가 설치되어 있고 모든 디" "스크 공간을 사용하고 있다면,\n" "리눅스용 공간을 새로 만들어야 합니다. 이렇게 하기위해서는, 윈도우즈 파티션을 " "지우거나(「전체 디스크 삭제」\n" "와 「전문가 모드」부분을 참조하세요.), 윈도우즈 파티션의 크기를 재조정하여 공" "간을 확보할 수 있습니다. 윈도우즈\n" "파티션의 재조정은 기존의 데이터를 파괴하지 않기 때문에, 윈도우즈와 리눅스 맨" "드레이크를 한 컴퓨터에서 함께\n" "사용하고자 한다면 이것이 권장되는 방법입니다.\n" "\n" "이 방법을 선택한다면, 윈도우즈 파티션의 크기가 현재보다 줄어들기 때문에 윈도" "우즈를\n" "사용할 때에는 소프트웨어를 설치하거나 데이터를 저장할 빈 공간이 그만큼 적어진" "다는\n" "것을 유념하세요.\n" "\n" " ○ 전체 디스크 삭제: 만약 디스크상의 모든 기존 파티션과 데이터를 삭제하고\n" "리눅스 맨드레이크를 위한 파티션으로 바꾸고 싶다면, 이것을 선택하세요.\n" "주의하세요: 일단 이렇게 하고나면 다시 되돌릴 수 없습니다.\n" "\n" " !! 이 옵션을 선택하게 되면, 디스크상의 모든 데이터가 손실됩니다. !!\n" "\n" " ○ 윈도우즈 제거: 디스크상의 모든 파티션을 삭제하고, 초기화된 디스크 상태에" "서\n" "파티션 작업을 다시 합니다. 디스크상의 모든 데이터는 손실됩니다.\n" "\n" " !! 이 옵션을 선택하게 되면, 디스크상의 모든 데이터가 손실됩니다. !!\n" "\n" " ○ 전문가 모드: 만약 수동으로 파티션 작업을 하고자 한다면, 이것을 선택하세" "요.\n" "이 방법은 대단히 강력하지만 또한 위험할 수 있다는 것을 명심하세요. 쉽게 데이" "터를\n" "잃어 버릴 수 있습니다. 전문적인 지식이 없다면, 이 방법은 절대 선택하지 마세" "요." #: ../../lang.pm:1 #, c-format msgid "Ukraine" msgstr "우크라이나" #: ../../standalone/drakbug:1 #, c-format msgid "Application:" msgstr "프로그램:" #: ../../network/isdn.pm:1 #, c-format msgid "External ISDN modem" msgstr "외장 ISDN 모뎀" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result by mail." msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (default %s) " msgstr "님의 선택은? (기본값 %s) " #: ../../harddrake/sound.pm:1 #, c-format msgid "Trouble shooting" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "시험 인쇄 페이지를 프린터로 보냈습니다.\n" "인쇄되기까지 약간의 시간이 걸릴 수 있습니다.\n" "인쇄 상황: \n" "%s\n" "\n" #: ../../standalone/drakbackup:1 #, c-format msgid "daily" msgstr "매일" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "and one unknown printer" msgstr "새 프린터 추가" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Ireland" msgstr "아일랜드" #: ../../standalone/drakbackup:1 #, c-format msgid " Restore Configuration " msgstr " 설정 복구 " #: ../../Xconfig/test.pm:1 #, fuzzy, c-format msgid "Is this the correct setting?" msgstr "이것이 맞습니까?" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "You will now set up your Internet/network connection. If you wish to\n" "connect your computer to the Internet or to a local network, click \"%s\".\n" "Mandrake Linux will attempt to autodetect network devices and modems. If\n" "this detection fails, uncheck the \"%s\" box. You may also choose not to\n" "configure the network, or to do it later, in which case clicking the \"%s\"\n" "button will take you to the next step.\n" "\n" "When configuring your network, the available connections options are:\n" "traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n" "simple LAN connection (Ethernet).\n" "\n" "We will not detail each configuration option - just make sure that you have\n" "all the parameters, such as IP address, default gateway, DNS servers, etc.\n" "from your Internet Service Provider or system administrator.\n" "\n" "You can consult the ``Starter Guide'' chapter about Internet connections\n" "for details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection." msgstr "" "이 컴퓨터를 인터넷이나 지역 네트워에 연결하고 싶다면, 올바른 옵션을\n" "선택하세요. 옵션을 선택하기 전에 네트웍 장치의 전원이 들어와있는지\n" "확인해서 드레이크X가 자동감지할 수 있도록 하세요.\n" "\n" "맨드레이크 리눅스에서는 설치시에 인터넷 설정을 하는 것이 여러 모로 좋습니" "다.\n" "유효한 연결 유형: 전통적 모뎀, ISDN 모뎀, ADSL 연결, 케이블 모뎀, LAN 연결(이" "더넷)\n" "\n" "자세한 설정 사항은 여기서 설명되지 않을 것입니다. 모든 인자들에 대한 정보는\n" "인터넷 서비스 공급자나 네트웍 관리자에게 문의해서 알아 보세요.\n" "\n" "사용자 설명서를 보면, 인터넷 연결에 대한 자세한 정보를 얻을 수 있습니다.\n" "또는 시스템이 다 설치될 때까지 기다린 후에, 설명서에 나와 있는 프로그램을 사" "용하여\n" "연결을 설정할 수도 있습니다.\n" "\n" "네트웍 설정을 설치가 끝난후에 하고 싶거나, 네트웍 설정을 끝마친 상태라면,\n" "「취소」를 눌러서 계속 진행하세요." #: ../../standalone/drakbackup:1 #, c-format msgid "Wizard Configuration" msgstr "마법사 설정" #: ../../modules/interactive.pm:1 #, c-format msgid "Autoprobe" msgstr "자동검색" #: ../../security/help.pm:1 #, c-format msgid "" "if set to yes, check for :\n" "\n" "- empty passwords,\n" "\n" "- no password in /etc/shadow\n" "\n" "- for users with the 0 id other than root." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup system files..." msgstr "시스템 파일 백업..." #: ../../any.pm:1 #, c-format msgid "Can't use broadcast with no NIS domain" msgstr "NIS 도메인 없이는 브로드케스트를 사용할 수 없습니다." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing printer \"%s\"..." msgstr "프린터 「%s」 제거 중 ..." #: ../../security/l10n.pm:1 #, c-format msgid "Shell history size" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "drakfloppy" msgstr "드레이크플로피" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the auto_install.cfg file is located.\n" "\n" "Leave it blank if you do not want to set up automatic installation mode.\n" "\n" msgstr "" #: ../../printer/cups.pm:1 ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Configured on other machines" msgstr "연결 설정" #: ../../standalone/harddrake2:1 #, c-format msgid "information level that can be obtained through the cpuid instruction" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Peru" msgstr "페루" #: ../../standalone/drakbackup:1 #, c-format msgid " on device: %s" msgstr "장치: %s" #: ../../install_interactive.pm:1 #, c-format msgid "Remove Windows(TM)" msgstr "윈도우즈(TM) 제거" #: ../../services.pm:1 #, c-format msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "X 폰트 서버 시작 (X 윈도우를 운영하기 위해서는 필수입니다)." #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "폰트 파일이나 디렉토리를 선택 후, '추가'를 누르세요." #: ../../lang.pm:1 #, c-format msgid "Madagascar" msgstr "마다가스카르" #: ../../standalone/drakbug:1 #, c-format msgid "Urpmi" msgstr "Urpmi" #: ../../standalone/drakbackup:1 #, c-format msgid "Cron not available yet as non-root" msgstr "" #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #: ../../standalone/drakbackup:1 #, c-format msgid "System" msgstr "시스템" #: ../../any.pm:1 ../../help.pm:1 #, fuzzy, c-format msgid "Do you want to use this feature?" msgstr "aboot를 사용하시겠습니까?" #: ../../keyboard.pm:1 #, c-format msgid "Arabic" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "" "\n" "- Options:\n" msgstr "옵션들" #: ../../standalone/drakbackup:1 #, c-format msgid "Password required" msgstr "암호가 필요합니다." #: ../../common.pm:1 #, c-format msgid "%d minutes" msgstr "%d 분" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Graphics card: %s" msgstr "그래픽 카드: %s" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV transfer failed!" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "XFree configuration" msgstr "XFree 설정" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Choose action" msgstr "행동을 선택하세요" #: ../../lang.pm:1 #, c-format msgid "French Polynesia" msgstr "프랑스령 폴리네시아" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be ``pressed'' by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the list provided.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and to\n" "go back to the list of choices.\n" "\n" "Wheel mice are occasionally not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n" "the mouse wheel to ensure that it is activated correctly. Once you see the\n" "on-screen scroll wheel moving as you scroll your mouse wheel, test the\n" "buttons and check that the mouse pointer moves on-screen as you move your\n" "mouse." msgstr "" "기본적으로 드레이크X는 님이 2버튼 마우스를 사용한다고 가정할 것이며,\n" "세 번째 버튼은 에뮬레이션할 것입니다. 마우스가 PS/2, 시리얼, 혹은 USB용인지" "는\n" "드레이크X가 자동으로 알아낼 수 있습니다.\n" "\n" "만약 다른 마우스 유형을 지정하고 싶다면, 제공되는 목록에서 적당한 것을\n" "선택하세요.\n" "\n" "만약 다른 마우스를 선택하게 되면, 마우스 테스트 화면을 보게될 것입니다.\n" "그러면, 마우스 버튼과 휠을 조작하여 설정이 정확하게 되었는지 확인하세요.\n" "만약 제대로 작동하기 않으면,「취소」버튼 위에서 스페이스 키나 엔터 키를\n" "누르고 다시 선택하시기 바랍니다." #: ../../services.pm:1 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "OKI 4w 및 호환 프린터 지원." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Files or wildcards listed in a .backupignore file at the top of a directory " "tree will not be backed up." msgstr "" #: ../../services.pm:1 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "ALSA (진보된 리눅스 사운드 아키텍처) 사운드 시스템 실행" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../modules/interactive.pm:1 #, c-format msgid "Installing driver for %s card %s" msgstr "%s카드 드라이버 %s 설치중" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" "이전 기본 프린터(「%s」)를 전송하였습니다. 새 프린팅 시스템 %s하에서 그것이 " "또한 기본 프린터가 되도록 하시겠습니까?" #: ../../standalone/drakTermServ:1 #, c-format msgid "Enable Server" msgstr "서버 사용" #: ../../keyboard.pm:1 #, c-format msgid "Ukrainian" msgstr "우크라이나" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" "네트웍 접근이 불가능했으며, 시작할 수도 없었습니다. 네트웍 설정과 하드웨어를 " "점검해 주세요. 그리고나서 원격 프린터 설정을 다시 시도해 보세요." #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to write the file" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "부팅 플로피를 %s 드라이브에 넣으세요" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Local network(s)" msgstr "C 클래스 지역 네트웍" #: ../../help.pm:1 #, fuzzy, c-format msgid "Remove Windows" msgstr "윈도우즈(TM) 제거" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" from Multimedia/Graphics in the " "applications menu." msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Firewire controllers" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "After you have configured the general bootloader parameters, the list of\n" "boot options that will be available at boot time will be displayed.\n" "\n" "If there are other operating systems installed on your machine they will\n" "automatically be added to the boot menu. You can fine-tune the existing\n" "options by clicking \"%s\" to create a new entry; selecting an entry and\n" "clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n" "changes.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone who goes to the console and reboots the machine. You can delete the\n" "corresponding entries for the operating systems to remove them from the\n" "bootloader menu, but you will need a boot disk in order to boot those other\n" "operating systems!" msgstr "" "LILO(리눅스 로더)와 GRUB은 부트 로더입니다: 이것들은 시스템상의\n" "GBU/리눅스 또는 다른 운영체제를 부팅시키는데 사용됩니다.\n" "일반적으로, 리눅스가 아닌 다른 운영체제도 자동으로 감지되어\n" "설정됩니다. 그러나 만약 그렇지 못한 경우, 여기서 직접 항목을\n" "추가할 수 있습니다. 정확한 인자값을 선택하도록 주의하세요.\n" "\n" "또한 다른 사람이 특정 운영체제를 부팅하는 것을 막고 싶을 수도\n" "있을 것입니다. 그런 경우, 해당 항목을 지우세요. 그러나 그렇게하면,\n" "그 운영체제를 부팅하기 위해서는 부팅 디스크가 있어야 합니다!" #: ../../standalone/drakboot:1 #, c-format msgid "System mode" msgstr "시스템 모드" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "넷웨어 프린터로 인쇄하려면, 넷웨어 서버의 호스트명 \n" "(주의! 그 서버의 TCP/IP 호스트명과는 이름이 다를 수 있습니다.)과 \n" "액세스하려는 프린터의 큐 이름, 정식 사용자명, 암호를 \n" "입력해야 합니다." #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Netmask:" msgstr "넷마스크" #: ../../network/adsl.pm:1 #, c-format msgid "Do it later" msgstr "" #: ../../any.pm:1 #, c-format msgid "Append" msgstr "추가" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "프린터 목록 갱신" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically " "made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" " "as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, " "but then you have to take care of these points." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "자동 설치는 원한다면 완벽한 자동화가 가능합니다.\n" "이럴 경우, 하드 드라이브를 점유해 버립니다!\n" "(이것은 또 다른 컴퓨터에 동일하게 설치할 때를 위한 것입니다.)\n" "\n" "일반적으로 직접 설치하는 것이 좋습니다.\n" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Network printer \"%s\", port %s" msgstr "네트웍 프린터 (소켓)" #: ../../standalone/drakgw:1 #, c-format msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "어느 네트웍 어댑터가 지역 네트웍으로 연결될 것인지 선택하세요." #: ../../standalone/drakbackup:1 #, c-format msgid "OK to restore the other files." msgstr "다른 파일들을 목구하려면, OK를 누르세요." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please choose your keyboard layout." msgstr "키보드 레이아웃 선택을 선택하세요." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer Device URI" msgstr "프린터 장치 URI" #: ../../standalone/drakbackup:1 #, c-format msgid "Not erasable media!" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Terminal-based" msgstr "터미날 기반" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable IP spoofing protection." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing a printing system in the %s security level" msgstr "보안 수준 %s로 인쇄 시스템 설치 중" #: ../../any.pm:1 #, c-format msgid "The user name is too long" msgstr "사용자 명이 너무 깁니다." #: ../../any.pm:1 #, c-format msgid "Other OS (windows...)" msgstr "기타 OS (windows...)" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV remote site already in sync!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Reading printer database..." msgstr "프린터 데이터베이스 읽는 중 ..." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Generate auto install floppy" msgstr "자동 설치 플로피 디스크 생성" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Somalia" msgstr "소말리아" #: ../../harddrake/sound.pm:1 #, c-format msgid "No open source driver" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Def." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "이전 등급과 비슷하지만, 시스템이 완전히 외부접근에서 격리됩니다. 최고 보안 수" "준입니다." #: ../../lang.pm:1 #, c-format msgid "Nicaragua" msgstr "니카라과" #: ../../lang.pm:1 #, c-format msgid "New Caledonia" msgstr "뉴 칼레도니아" #: ../../network/isdn.pm:1 #, c-format msgid "European protocol (EDSS1)" msgstr "유럽 프로토콜 (EDSS1)" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "/_Delete" msgstr "삭제" #: ../../any.pm:1 #, c-format msgid "Video mode" msgstr "비디오 모드" #: ../../lang.pm:1 #, c-format msgid "Oman" msgstr "오만" #: ../../standalone/logdrake:1 #, c-format msgid "Please enter your email address below " msgstr "아래에 이메일 주소를 입력하세요." #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Network Monitoring" msgstr "네트웍 환경 설정" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "SunOS" msgstr "SunOS" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "New size in MB: " msgstr "새로운 용량(MB):" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Partition table type: %s\n" msgstr "파티션 테이블 유형: %s\n" #: ../../any.pm:1 #, c-format msgid "Authentication Windows Domain" msgstr "인증 윈도우즈 도메인" #: ../../keyboard.pm:1 #, c-format msgid "US keyboard" msgstr "미국" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Buttons emulation" msgstr "버튼 에뮬레이션" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", network printer \"%s\", port %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Sending Speed:" msgstr "파일 전송 중 ..." #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Halt bug" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Mail alert configuration" msgstr "메일 경고 설정" #: ../../lang.pm:1 #, c-format msgid "Tokelau" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Matching" msgstr "찾을 문자열" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Bosnian" msgstr "에스토니아" #: ../../standalone/drakbug:1 #, c-format msgid "Release: " msgstr "릴리즈:" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection speed" msgstr "연결 속도" #: ../../lang.pm:1 #, c-format msgid "Namibia" msgstr "나미비아" #: ../../services.pm:1 #, c-format msgid "Database Server" msgstr "데이터베이스 서버" #: ../../standalone/harddrake2:1 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "" #: ../../raid.pm:1 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "포맷된 RAID md%d에 파티션을 추가할 수 없습니다." #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "님의 카드는 XFree %s로만 가능한 3D 하드웨어 가속기능이 지원됩니다.\n" "주의: 이것은 실험적인 지원이며 님의 컴퓨터를 멈추게 할 수 있습니다.\n" "님의 카드는 어쩌면 보다 향상된 2D 성능을 보일 수 있는 XFree %s을 지원합니다." #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Please wait, setting security options..." msgstr "설치 준비중입니다. 잠시 기다리세요." #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "시작할 때 X-Window 실행" #: ../../standalone/drakbackup:1 #, c-format msgid "hourly" msgstr "매시" #: ../../keyboard.pm:1 #, c-format msgid "Right Shift key" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid " Successfuly Restored on %s " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Making printer port available for CUPS..." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Antigua and Barbuda" msgstr "안티가 바부다" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Spanish" msgstr "스페인" #: ../../services.pm:1 #, c-format msgid "Start" msgstr "시작" #: ../../security/l10n.pm:1 #, c-format msgid "Direct root login" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuring applications..." msgstr "프로그램 설정 중 ..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected. Also your network printer(s) and your Windows " "machines must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you don't need " "it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Normal modem connection" msgstr "일반 모뎀 연결" #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "File Selection" msgstr "파일 선택" #: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1 #, c-format msgid "CUPS" msgstr "CUPS" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Erase tape before backup" msgstr "테입을 사용한 백업" #: ../../standalone/harddrake2:1 #, c-format msgid "Run config tool" msgstr "설정 도구 실행" #: ../../any.pm:1 #, c-format msgid "Bootloader installation" msgstr "부트로더 설치" #: ../../install_interactive.pm:1 #, c-format msgid "Root partition size in MB: " msgstr "루트 파티션 크기(MB): " #: ../../install_steps_gtk.pm:1 #, c-format msgid "This is a mandatory package, it can't be unselected" msgstr "이것은 필수적인 팩키지입니다. 반드시 선택되어야 합니다." #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Create etherboot floppies/CDs:\n" " \tThe diskless client machines need either ROM images on the NIC, or " "a boot floppy\n" " \tor CD to initate the boot sequence. drakTermServ will help " "generate these\n" " \timages, based on the NIC in the client machine.\n" " \t\t\n" " \tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \tcat /usr/lib/etherboot/boot1a.bin \\\n" " \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot ISO image is %s" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "NAMED(BIND)는 호스트 이름으로 IP 주소를 찾아내는데 사용되는\n" "도메인 네임 서버입니다." #: ../../lang.pm:1 #, c-format msgid "Saint Lucia" msgstr "세인트 루시아" #: ../../standalone/drakbackup:1 #, c-format msgid "November" msgstr "십일월" #: ../../standalone/drakconnect:1 #, c-format msgid "Disconnect..." msgstr "연결 끊기..." #: ../../standalone/drakbug:1 #, c-format msgid "Report" msgstr "보고" #: ../../lang.pm:1 #, c-format msgid "Palau" msgstr "팔라우" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "level" msgstr "레벨" #: ../../share/advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "" "All incidents will be followed up by a single qualified MandrakeSoft " "technical expert." msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Package Group Selection" msgstr "팩키지 그룹 선택" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "" "Allow local hardware\n" "configuration." msgstr "자동 재설정" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "You can configure each parameter of the module here." msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Choose the resolution and the color depth" msgstr "해상도와 색상을 선택하세요" #: ../../standalone/mousedrake:1 #, c-format msgid "Emulate third button?" msgstr "3버튼 에뮬레이트?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount" msgstr "마운트" #: ../../standalone/drakautoinst:1 #, c-format msgid "Creating auto install floppy" msgstr "자동 설치 플로피 생성" #: ../../steps.pm:1 #, fuzzy, c-format msgid "Install updates" msgstr "시스템 업데이트 설치" #: ../../standalone/draksplash:1 #, c-format msgid "text box height" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "State" msgstr "상태:" #: ../../standalone/drakfloppy:1 #, c-format msgid "Be sure a media is present for the device %s" msgstr "%s 장치에 매체가 들어있는지 확인하세요." #: ../../any.pm:1 #, c-format msgid "Enable multiple profiles" msgstr "다중 profiles 허용" #: ../../fs.pm:1 #, c-format msgid "Do not interpret character or block special devices on the file system." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Local printer" msgstr "로컬 프린터" #: ../../standalone/drakbackup:1 #, c-format msgid "Files Restored..." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Package selection" msgstr "팩키지 선택" #: ../../lang.pm:1 #, c-format msgid "Mauritania" msgstr "모리타니아" #: ../../standalone/drakgw:1 #, c-format msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\t\t \n" "Otherwise, I can reconfigure your interface and (re)configure a DHCP server " "for you.\n" "\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All primary partitions are used" msgstr "모든 주파티션이 사용중입니다." #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "LPD server \"%s\", printer \"%s\"" msgstr "프린터「%s」상에서 인쇄 중" #: ../../network/netconnect.pm:1 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "완료된 후에, X를 다시 시작하여 호스트명 변경에 따른\n" "문제 발생을 피하시기 바랍니다." #: ../../services.pm:1 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "부팅시에 자동 하드웨어 검색 및 설정." #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Installation Server Configuration" msgstr "고급 설정" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Configuring IDE" msgstr "IDE 설정중" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Network functionality not configured" msgstr "네트웍 기능이 설정되지 않았습니다." #: ../../standalone/harddrake2:1 #, c-format msgid "Configure module" msgstr "모듈 설정" #: ../../lang.pm:1 #, c-format msgid "Cocos (Keeling) Islands" msgstr "코코스 (킬링) 제도" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "변경된것을 적용하기 위해선 리부팅이 필요합니다." #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider phone number" msgstr "공급자 전화번호" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Host %s" msgstr "호스트명:" #: ../../lang.pm:1 #, c-format msgid "Fiji" msgstr "피지" #: ../../lang.pm:1 #, c-format msgid "Armenia" msgstr "아르메니아" #: ../../any.pm:1 #, c-format msgid "Second floppy drive" msgstr "두번째 플로피 드라이브" #: ../../standalone/harddrake2:1 #, c-format msgid "About Harddrake" msgstr "하드 드레이크 정보" #: ../../security/l10n.pm:1 #, c-format msgid "Authorize TCP connections to X Window" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Drive capacity" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "플로피 디스크를 드라이브에 넣으세요\n" "플로피 디스크의 모든 자료를 잃게 됩니다." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size: %s" msgstr "크기: %s" #: ../../keyboard.pm:1 #, c-format msgid "Control and Shift keys simultaneously" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "secondary" msgstr "두번째" #: ../../standalone/drakbackup:1 #, c-format msgid "View Backup Configuration." msgstr "백업 설정 보기" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result to syslog." msgstr "" #. -PO: keep this short or else the buttons will not fit in the window #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "No password" msgstr "암호 없음" #: ../../lang.pm:1 #, c-format msgid "Nigeria" msgstr "나이지리아" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s: %s requires hostname...\n" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "There is no existing partition to use" msgstr "사용할 기존의 파티션이 없습니다." #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "시스템 폰트 복사" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Multi-function device on parallel port #%s" msgstr "프린터 호스트명 또는 IP" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" "소켓 프린터로 인쇄하기 위해서는, 프린터의 호스트명과 \n" "포트 번호(옵션)를 지정해야 합니다. HP JetDirect 서버상에서는\n" "일반적으로 9100 포트를 사용하지만, 다른 서버상에서는 각기\n" "다를 수 있습니다. 하드웨어 설명서를 참조하세요." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Hard drive information" msgstr "하드 디스크 정보" #: ../../keyboard.pm:1 #, c-format msgid "Russian" msgstr "러시아" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Jordan" msgstr "요르단" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Hide files" msgstr "파일 숨기기" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Auto-detect printers connected to this machine" msgstr "프린터 자동검색" #: ../../any.pm:1 #, c-format msgid "Sorry, no floppy drive available" msgstr "죄송합니다. 사용가능한 플로피 드라이브가 없습니다." #: ../../lang.pm:1 #, c-format msgid "Bolivia" msgstr "볼리비아" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Bad package" msgstr "잘못된 팩키지" #: ../../share/advertising/07-server.pl:1 #, c-format msgid "" "Transform your computer into a powerful Linux server: Web server, mail, " "firewall, router, file and print server (etc.) are just a few clicks away!" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "DrakSec Basic Options" msgstr "DrakSec 기본 옵션" #: ../../standalone/draksound:1 #, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the sndconfig " "program. Just type \"sndconfig\" in a console." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Romania" msgstr "루마니아" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Group" msgstr "그룹" #: ../../lang.pm:1 #, c-format msgid "Canada" msgstr "캐나다" #: ../../standalone/scannerdrake:1 #, c-format msgid "choose device" msgstr "장치 선택" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove from LVM" msgstr "LVM으로부터 제거" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Timezone" msgstr "시간대" #: ../../keyboard.pm:1 #, c-format msgid "German" msgstr "독일" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Next ->" msgstr "다음 ->" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Turning on this allows to print plain text files in japanese language. Only " "use this function if you really want to print text in japanese, if it is " "activated you cannot print accentuated characters in latin fonts any more " "and you will not be able to adjust the margins, the character size, etc. " "This setting only affects printers defined on this machine. If you want to " "print japanese text on a printer set up on a remote machine, you have to " "activate this function on that remote machine." msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" "\n" "이 파티션은 드라이버 파티션입니다.\n" "그냥 두는 것이 좋습니다.\n" #: ../../lang.pm:1 #, c-format msgid "Guinea-Bissau" msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Horizontal refresh rate" msgstr "수평 주파수" #: ../../standalone/drakperm:1 ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Edit" msgstr "종료" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "이 파티션은 loopback으로 설정되어 있으므로 마운트 포인트를 변경할수 없습니" "다.\n" "loopback을 먼저 제거하세요." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network is accessable after booting your " "system and correct the configuration using the Mandrake Control Center, " "section \"Network & Internet\"/\"Connection\", and afterwards set up the " "printer, also using the Mandrake Control Center, section \"Hardware\"/" "\"Printer\"" msgstr "" "설치과정에서 설정한 네트웍을 시작할 수 없습니다. 시스템이 부팅될 때, 네트웍" "이 자동 실행되도록 되어 있는지 확인하고, 맨드레이크 제어 센터(「네트웍과 인터" "넷」/「연결」)를 이용하여 올바르게 설정하세요.그리고나서 다시 맨드레이크 제" "어 센터(「하드웨어」/「프린터」)를 이용하여, 프린터 설정을 다시 해 보세요." #: ../../harddrake/data.pm:1 #, c-format msgid "USB controllers" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "What norm is your TV using?" msgstr "TV 카드가 어떤 놈을 사용합니까?" #: ../../standalone/drakconnect:1 #, c-format msgid "Type:" msgstr "유형: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Share name" msgstr "공유 이름" #: ../../standalone/drakgw:1 #, c-format msgid "enable" msgstr "허용" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "유효한 미러 목록을 받기 위해 맨드레이크 리눅스 웹사이트에 접속 중..." #: ../../network/netconnect.pm:1 #, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "" "네트웍을 다시 시작하는 도중에 문제가 발생했습니다:\n" "\n" "%s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove the loopback file?" msgstr "루프백 파일을 제거합니까?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Selected size is larger than available space" msgstr "선택된 용량이 사용할 수 있는 공간보다 큽니다." #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP server name missing!" msgstr "NCP 서버 이름을 찾을 수 없음!" #: ../../any.pm:1 #, fuzzy, c-format msgid "Please choose your country." msgstr "어떤 종류의 마우스를 사용하십니까?" #: ../../standalone/drakbackup:1 #, c-format msgid "Hard Disk Backup files..." msgstr "하드 디스크 백업 파일들" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Laotian" msgstr "라트바아" #: ../../lang.pm:1 #, c-format msgid "Samoa" msgstr "사모아" #: ../../services.pm:1 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "rstat 프로토콜은 네트웍상의 사용자가 구 네트워상에 있는 \n" "모든 컴퓨터에 대하여 수행능력 메트릭스를 알아 볼 수 있게 합니다." #: ../../standalone/scannerdrake:1 #, c-format msgid "Re-generating list of configured scanners ..." msgstr "" #: ../../modules/interactive.pm:1 #, fuzzy, c-format msgid "Module configuration" msgstr "수동 설정" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Scanner" msgstr "스캐너 선택" #: ../../Xconfig/test.pm:1 #, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "사용자명은 영문 소문자나 숫자, '-' 그리고 '_' 만 포함될수 있습니다." #: ../../standalone/drakbug:1 #, c-format msgid "Menudrake" msgstr "메뉴 드레이크" #: ../../security/level.pm:1 #, c-format msgid "Welcome To Crackers" msgstr "보안에 신경안씀" #: ../../modules/interactive.pm:1 #, c-format msgid "Module options:" msgstr "모듈 옵션들:" #: ../../share/advertising/11-mnf.pl:1 #, c-format msgid "Secure your networks with the Multi Network Firewall" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Go on without configuring the network" msgstr "네트웍 설정 없이 계속" #: ../../network/isdn.pm:1 #, c-format msgid "Abort" msgstr "중지" #: ../../standalone/drakbackup:1 #, c-format msgid "No password prompt on %s at port %s" msgstr "" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Kensington Thinking Mouse with Wheel emulation" msgstr "켄싱턴 씽킹 마우스" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Usage of remote scanners" msgstr "빈 공간 사용" #: ../../install_interactive.pm:1 #, c-format msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrake Linux " "installation." msgstr "" "윈도우즈 파티션이 심하게 조각나 있습니다. 먼저 ``디스크 조각 모음''을 하세요." #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (Norwegian)" msgstr "드보락(노르웨이)" #: ../../standalone/drakbackup:1 #, c-format msgid "Hard Disk Backup Progress..." msgstr "" #: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 #, c-format msgid "Unable to fork: %s" msgstr "분기할 수 없습니다: %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Type: " msgstr "유형: " #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "<-- Edit Client" msgstr "<-- 클라이언트 삭제" #: ../../standalone/drakfont:1 #, c-format msgid "no fonts found" msgstr "폰트를 찾을 수 없습니다." #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../harddrake/data.pm:1 #, c-format msgid "Mouse" msgstr "마우스" #: ../../bootloader.pm:1 #, c-format msgid "not enough room in /boot" msgstr "/boot에 공간이 부족합니다." #: ../../lang.pm:1 #, c-format msgid "Liechtenstein" msgstr "리히텐슈타인" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Host name" msgstr "호스트명:" #: ../../standalone/draksplash:1 #, c-format msgid "the color of the progress bar" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Suppress Fonts Files" msgstr "폰트 파일들 은폐" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Add to RAID" msgstr "RAID에 추가" #: ../../help.pm:1 #, c-format msgid "" "You can add additional entries in yaboot for other operating systems,\n" "alternate kernels, or for an emergency boot image.\n" "\n" "For other OSs, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is the name you will have to type at the yaboot prompt to\n" "select this boot option.\n" "\n" " * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n" "variation of vmlinux with an extension.\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation.\n" "\n" " * Append: on Apple hardware, the kernel append option is often used to\n" "assist in initializing video hardware, or to enable keyboard mouse button\n" "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n" "The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation.\n" "\n" " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n" "need to allocate a large ramdisk, this option can be used to specify a\n" "ramdisk larger than the default.\n" "\n" " * Read-write: normally the \"root\" partition is initially mounted as\n" "read-only, to allow a file system check before the system becomes ``live''.\n" "You can override the default with this option.\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support.\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by pressing ENTER at the yaboot prompt. This entry will also be\n" "highlighted with a ``*'' if you press [Tab] to see the boot selections." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "No floppy drive available!" msgstr "유효한 프로피 드라이브를 찾을 수 없습니다!" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s%s\n" "\n" msgstr "" "현재 프린터에 사용할 수 있는 옵션 목록을 보려면, 「인쇄 옵션 목록」을 누르세" "요.\n" "\n" #: ../../lang.pm:1 #, c-format msgid "Saudi Arabia" msgstr "사우디아라비아" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Continue anyway?" msgstr "계속하시겠습니까?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer" msgstr "프린터" #: ../../services.pm:1 #, c-format msgid "Internet" msgstr "인터넷" #: ../../standalone/service_harddrake:1 #, c-format msgid "Some devices were added:\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "위치: %s 실린터, %s 헤드, %s 섹터\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing on the printer \"%s\"" msgstr "프린터「%s」상에서 인쇄 중" #: ../../standalone/drakTermServ:1 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From Tape" msgstr "테입으로부터 복구" #: ../../standalone/drakbug:1 #, c-format msgid "" "To submit a bug report, click the report button, which will open your " "default browser\n" "to Anthill where you will be able to upload the above information as a bug " "report." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Choose the profile to configure" msgstr "설정할 프로파일을 선택하세요." #: ../../security/l10n.pm:1 #, c-format msgid "Password minimum length and number of digits and upcase letters" msgstr "" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "" "\n" "\n" "Enter a Zeroconf host name without any dot if you don't\n" "want to use the default host name." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Now from configuration file" msgstr "지금 설정 파일로부터 백업" #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "프린터 이름에는 문자, 숫자 그리고 밑줄(Underscore)만 있어야 합니다." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Restarting printing system..." msgstr "인쇄 시스템 재실행 중 ..." #: ../../modules/interactive.pm:1 #, c-format msgid "See hardware info" msgstr "하드웨어 정보 보기" #: ../../standalone/drakbackup:1 #, c-format msgid "Day" msgstr "하루씩" #: ../../any.pm:1 #, c-format msgid "First sector of boot partition" msgstr "부트 파티션의 첫번째 섹터" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model" msgstr "프린터 제조업체, 모델" #: ../../printer/data.pm:1 #, c-format msgid "PDQ - Print, Don't Queue" msgstr "PDQ - Print, Don't Queue" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]...\n" "Mandrake Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet Mask:" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Set password expiration and account inactivation delays" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "" "_: load here is a noun, the load of the system\n" "Load" msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "수직 그리고 더욱 중요한 수평 주파수라는 두 개의 중요한 인자가 있습니다. 수직 " "주파수는 \n" "전체화면이 갱신되는 주기이며, 수평 주파수는 스캔라인들이 갱신되는 주기입니" "다.\n" "\n" "매우 중요: 님의 실제 모니터의 능력치를 넘어서는 모델을 선택하지 마세요: \n" "님의 모니터가 훼손될 수 있습니다.\n" "잘 모르겠다면, 안전하게 낮은 설정값을 선택하세요" #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, c-format msgid "Modify" msgstr "변경" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" "\n" "「%s」와「%s」명령은 또한 특정 인쇄 작업을 위한 옵션 설정을 수정할 수 있게 합" "니다. 명령행에 원하는 설정값을 추가하세요, 예: 「%s <파일>」.\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Need hostname, username and password!" msgstr "" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "Insert floppy" msgstr "%s에 프로피를 넣으세요." #: ../../diskdrake/dav.pm:1 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "HardDrake" msgstr "하드 드레이크" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "new" msgstr "새로 만들기" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable syslog reports to console 12" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Would you like to try again?" msgstr "인쇄 설정을 하시겠습니까?" #: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Wizard" msgstr "마법사" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Edit selected server" msgstr "%s 발견" #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose where you want to backup" msgstr "백업할 곳을 선택하세요." #: ../../install_steps_interactive.pm:1 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "파티션 테이블 변경사항을 적용하려면 리부팅을 해야 합니다." #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include the browser cache" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can lose data)" msgstr "" #: ../../standalone/keyboarddrake:1 #, c-format msgid "Please, choose your keyboard layout." msgstr "키보드 레이아웃 선택" #: ../../mouse.pm:1 ../../security/level.pm:1 #, c-format msgid "Standard" msgstr "표준" #: ../../standalone/mousedrake:1 #, c-format msgid "Please choose your mouse type." msgstr "어떤 종류의 마우스를 사용하십니까?" #: ../../standalone/drakconnect:1 #, c-format msgid "Connect..." msgstr "연결..." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Failed to configure printer \"%s\"!" msgstr "프린터 「%s」 설정 중 ..." #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "not configured" msgstr "재설정" #: ../../network/isdn.pm:1 #, c-format msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "About" msgstr "중지" #: ../../network/network.pm:1 #, c-format msgid "Proxies configuration" msgstr "프락시 설정" #: ../../mouse.pm:1 #, c-format msgid "GlidePoint" msgstr "ALPS 글라이드포인트" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Start: sector %s\n" msgstr "시작: 섹터 %s\n" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "No Mask" msgstr "잘못된 팩키지" #: ../../standalone/drakgw:1 #, c-format msgid "Network interface already configured" msgstr "네트웍 인터페이스는 이미 설정되어 있습니다." #: ../../standalone/drakTermServ:1 #, c-format msgid "Couldn't access the floppy!" msgstr "" #: ../../install_messages.pm:1 #, c-format msgid "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, " "the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a " "patent\n" "may be applicable to you, check your local laws." msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Mail Server" msgstr "메일 서버" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please click on a partition" msgstr "파티션을 클릭하세요" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on HP JetDirect" msgstr "" #: ../../any.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Linux" msgstr "리눅스" #: ../../standalone/drakxtv:1 #, c-format msgid "Have a nice day!" msgstr "즐거운 하루를!" #: ../../help.pm:1 #, c-format msgid "/dev/fd0" msgstr "/dev/fd0" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Upgrade %s" msgstr "업그레이드" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select Printer Connection" msgstr "프린터 연결방법을 선택하세요." #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels in progress ..." msgstr "TV 채널 검색 진행 중..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sending file via FTP.\n" " Please correct your FTP configuration." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range Start:" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "(통상적으로 inetd라고 하는) 인터넷 수퍼 대몬은 다양한 인터넷 서버를\n" "필요한 때 실행 시킵니다. 텔넷, FTP, RSH, RLOGIN 등과 같은 많은 \n" "서비스를 관리합니다. 이것이 실행되어 있지 않으면, 또한 이것이 관리하는\n" "여러 서비스도 또한 불가능하게 됩니다." #: ../../standalone/draksplash:1 #, c-format msgid "the height of the progress bar" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Argentina" msgstr "아르헨티나" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Domain Name Server" msgstr "도메인 네임 서버" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Security Level:" msgstr "보안 수준" #: ../../fsedit.pm:1 #, c-format msgid "Mount points must begin with a leading /" msgstr "마운트 위치는 반드시 「/」로 시작하여야 합니다." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Choose your CD/DVD device" msgstr "CD/DVD 용량을 선택하세요." #: ../../standalone/logdrake:1 #, c-format msgid "Postfix Mail Server" msgstr "포스트픽스 메일 서버" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without saving" msgstr "저장하지 않고 종료하시겠습니까?" #: ../../lang.pm:1 #, c-format msgid "Yemen" msgstr "예멘" #: ../../share/advertising/11-mnf.pl:1 #, c-format msgid "This product is available on the MandrakeStore Web site." msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Hard drive detection" msgstr "하드 디스크 선택" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "" "You need the Alcatel microcode.\n" "You can provide it now via a floppy or your windows partition,\n" "or skip and do it later." msgstr "" #: ../../diskdrake/dav.pm:1 #, c-format msgid "Please enter the WebDAV server URL" msgstr "WebDAV 서버 URL을 입력하세요." #: ../../lang.pm:1 #, c-format msgid "Tajikistan" msgstr "타지키스탄" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 #, c-format msgid "Accept" msgstr "동의" #: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #: ../../standalone/printerdrake:1 #, c-format msgid "Description" msgstr "설명" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Please enter summary text." msgstr "아이디를 입력하세요." #: ../../fsedit.pm:1 #, c-format msgid "Error opening %s for writing: %s" msgstr "%s를 쓰기위해 여는중 오류발생: %s" #: ../../Xconfig/various.pm:1 #, c-format msgid "Mouse type: %s\n" msgstr "마우스 종류: %s\n" #: ../../Xconfig/card.pm:1 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "님의 카드는 XFree %s로 3D 하드웨어 가속기능을 지원합니다." #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Choose a monitor" msgstr "모니터를 선택하세요" #: ../../any.pm:1 #, c-format msgid "Empty label not allowed" msgstr "빈 항목명은 허용되지 않습니다." #: ../../keyboard.pm:1 #, c-format msgid "Maltese (UK)" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "I can't add any more partition" msgstr "더이상 파티션을 추가할 수 없습니다." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size in MB: " msgstr "크기(MB) :" #: ../../printer/main.pm:1 #, c-format msgid "Remote printer" msgstr "원격 프린터" #: ../../any.pm:1 #, c-format msgid "Please choose a language to use." msgstr "사용할 언어를 선택해 주세요." #: ../../network/network.pm:1 #, c-format msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" "경고: 이 장치는 이미 인터넷 연결용으로 설정되어 있습니다.\n" "그냥 현재 설정을 유지하세요.\n" "아래 입력란을 변경하면 현재 설정을 덮어쓰게 됩니다." #: ../../any.pm:1 #, fuzzy, c-format msgid "I can set up your computer to automatically log on one user." msgstr "" "자동으로 특정 사용자로서 로그인되도록 할 수 있습니다.\n" "이런 특성을 원하세요?" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Floppy format" msgstr "포맷" #: ../../standalone/drakfont:1 #, c-format msgid "Generic Printers" msgstr "일반 프린터" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer to which the print jobs should go or enter a " "device name/file name in the input line" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "" #: ../../any.pm:1 #, fuzzy, c-format msgid "First sector of the root partition" msgstr "부트 파티션의 첫번째 섹터" #: ../../standalone/harddrake2:1 #, c-format msgid "Alternative drivers" msgstr "대체 드라이버들" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Please check all options that you need.\n" msgstr "" #: ../../any.pm:1 #, c-format msgid "Initrd" msgstr "초기화 램디스크" #: ../../lang.pm:1 #, c-format msgid "Cape Verde" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "whether this cpu has the Cyrix 6x86 Coma bug" msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Loading printer configuration... Please wait" msgstr "인터넷 설정 변경" #: ../../standalone/harddrake2:1 #, c-format msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Guam" msgstr "괌" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the port that your printer is connected to or enter a device " "name/file name in the input line" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "/Options/Test" msgstr "옵션(O)/테스트" #: ../../security/level.pm:1 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "이 등급을 사용할려면 매우 주의하여야 합니다. 시스템을 사용하기에는 \n" "용이하겠지만 매우 민감하게 작동합니다: 인터넷이나 네트웍에 연결된 시스템용\n" "으로는 사용하지 마세요. 암호기능이 없습니다." #: ../../fs.pm:1 #, fuzzy, c-format msgid "Mounting partition %s" msgstr "%s 파티션 포맷중" #: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "User name" msgstr "사용자명" #: ../../standalone/drakbug:1 #, c-format msgid "Userdrake" msgstr "사용자 드레이크" #: ../../install_interactive.pm:1 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "어느 파티션을 Linux4Win용으로 사용하겠습니까?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Test pages" msgstr "시험 페이지" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Logical volume name " msgstr "지역 파일들" #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data to restore:\n" "\n" msgstr "" #: ../../fs.pm:1 #, fuzzy, c-format msgid "Checking %s" msgstr "%s 복사 중" #: ../../printer/printerdrake.pm:1 #, c-format msgid "TCP/Socket Printer Options" msgstr "TCP/소켓 프린터 옵션" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card mem (DMA)" msgstr "카드 메모리 (DMA)" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Disconnecting from Internet " msgstr "인터넷에 연결" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "France" msgstr "프랑스" #: ../../standalone/drakperm:1 #, c-format msgid "browse" msgstr "찾아보기" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking installed software..." msgstr "설치된 소프트웨어 확인 중 ..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote printer name missing!" msgstr "원격 프린터명이 빠졌습니다!!" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Do you want to enable printing on printers in the local network?\n" msgstr "" "이 프린터(%s)를\n" "기본 프린터로 하시겠습니까?" #: ../../lang.pm:1 #, c-format msgid "Turkey" msgstr "터키" #: ../../network/adsl.pm:1 #, c-format msgid "Alcatel speedtouch usb" msgstr "알카텔 스피드터치 USB" #: ../../standalone/harddrake2:1 #, c-format msgid "Number of buttons" msgstr "버튼 수" #: ../../keyboard.pm:1 #, c-format msgid "Vietnamese \"numeric row\" QWERTY" msgstr "베트남 (숫자열 QWERTY)" #: ../../standalone/harddrake2:1 #, c-format msgid "Module" msgstr "모듈" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" "그리고 또한, 이 프로그램이나 「Foomatic 설정」으로 생성되지 않은 큐는 전송될 " "수 없습니다." #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Hardware" msgstr "하드 드레이크" #: ../../keyboard.pm:1 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "United States" msgstr "미국" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "User umask" msgstr "사용자들" #: ../../any.pm:1 #, c-format msgid "Default OS?" msgstr "기본 OS?" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (German layout)" msgstr "스위스 (독어)" #: ../../Xconfig/card.pm:1 #, c-format msgid "Configure all heads independently" msgstr "모든 헤드를 독립적으로 설정" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer you want to set up. The configuration of the " "printer will work fully automatically. If your printer was not correctly " "detected or if you prefer a customized printer configuration, turn on " "\"Manual configuration\"." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "NTP Server" msgstr "NTP 서버" #: ../../security/l10n.pm:1 #, c-format msgid "Sulogin(8) in single user level" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Load/Save on floppy" msgstr "플로피에 저장/적재" #: ../../standalone/draksplash:1 #, c-format msgid "This theme does not yet have a bootsplash in %s !" msgstr "" #: ../../pkgs.pm:1 #, c-format msgid "nice" msgstr "좋은 팩키지" #: ../../Xconfig/test.pm:1 #, fuzzy, c-format msgid "Leaving in %d seconds" msgstr "%d 초" #: ../../network/modem.pm:1 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "어떤 시리얼 포트에 마우스가 연결되어 있나요?" #: ../../standalone/drakperm:1 #, c-format msgid "Property" msgstr "속성" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript" msgstr "고스트스크립트" #: ../../standalone/drakconnect:1 #, c-format msgid "LAN Configuration" msgstr "LAN 설정" #: ../../lang.pm:1 #, c-format msgid "Ghana" msgstr "가나" #: ../../standalone/drakbackup:1 #, c-format msgid "Path or Module required" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Advanced Options" msgstr "고급 옵션" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "View Configuration" msgstr "설정" #: ../../standalone/harddrake2:1 #, c-format msgid "Coma bug" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or by another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"%s\": this option deletes all partitions on the selected hard drive\n" "\n" " * \"%s\": this option enables you to automatically create ext3 and swap\n" "partitions in the free space of your hard drive\n" "\n" "\"%s\": gives access to additional features:\n" "\n" " * \"%s\": saves the partition table to a floppy. Useful for later\n" "partition-table recovery if necessary. It is strongly recommended that you\n" "perform this step.\n" "\n" " * \"%s\": allows you to restore a previously saved partition table from a\n" "floppy disk.\n" "\n" " * \"%s\": if your partition table is damaged, you can try to recover it\n" "using this option. Please be careful and remember that it doesn't always\n" "work.\n" "\n" " * \"%s\": discards all changes and reloads the partition table that was\n" "originally on the hard drive.\n" "\n" " * \"%s\": unchecking this option will force users to manually mount and\n" "unmount removable media such as floppies and CD-ROMs.\n" "\n" " * \"%s\": use this option if you wish to use a wizard to partition your\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": use this option to cancel your changes.\n" "\n" " * \"%s\": allows additional actions on partitions (type, options, format)\n" "and gives more information about the hard drive.\n" "\n" " * \"%s\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "이제 어느 파티션이 맨드레이크 리눅스의 설치용으로 사용되어야 할지를\n" "선택해야 합니다. 이전에 다른 GNU/리눅스를 설치한 적이 있거나, 다른 파티션\n" "도구를 사용하여 이미 파티션들이 정의되어 있다면, 기존 파티션을 그대로 사용\n" "할 수 있습니다. 그렇지 않다면 하드디스크의 파티션들을 지금 만들어야 합니다.\n" "\n" "파티션을 만들려면, 먼저 하드디스크를 선택하세요. 파티션을 만들여는 하드디스크" "가\n" "첫 번째 IDE 디스크라면 「hda」, 두 번째 IDE 디스크라면 「hdb」와 같은 식이" "며,\n" "첫 번째 SCSI 디스크라면 「sda」와 같은 식입니다.\n" "\n" "파티션을 나눌 때, 다음 옵션을 사용할 수 있습니다:\n" "\n" " ○ 「모두 삭제」: 선택된 디스크의 모든 기존 파티션을 삭제합니다.\n" "\n" " ○ 「자동 할당」: 선택된 디스크의 빈 공간에 자동으로 EXT2와 스왑 파티션을\n" "할당합니다.\n" "\n" " ○ 「파티션 테이블 복구」: 파티션 테이블이 손상되어 있을 경우, 이 옵션으" "로\n" "손산된 테이블을 복구합니다. !!주의!! 복구시도가 실패할 수도 있다는 것을\n" "명심하세요.\n" "\n" " ○ 「되돌리기」: 변경 사항을 취소합니다.\n" "\n" " ○ 「다시 읽기」: 모든 변경 사항을 취소하고, 초기 파티션 테이블을 다시 읽습" "니다.\n" "\n" " ○ 「마법사」: 마법사를 실행하여 파티션을 나눕니다. 파티션 나누기에 대한 지" "식이\n" "부족하다면, 이 옵션을 사용하세요.\n" "\n" " ○ 「플로피로부터 복구」: 이전에 플로피에 저장해둔 파티션 정보을 사용하여\n" "파티션 테이블을 복구합니다.\n" "\n" " ○ 「플로피에 저장」: 파티션 정보를 플로피에 저장합니다. 다음에 파티션 테이" "블을 복구할\n" "일이 생길 때 사용됩니다. 이 과정을 수행할 것을 권장하는 바입니다.\n" "\n" " ○ 「완료」: 파티션 나누기 작업을 끝마치면, 이 옵션으로 변경 사항을 저장합" "니다.\n" "\n" "정보: 키보드로 옵션을 선택할 수도 있습니다. 파티션들간의 이동은 [Tab]키와\n" "[Up/Down]키를 사용하세요.\n" "\n" "파티션을 선택하고 난 후에는 다음 키를 사용할 수 있습니다:\n" "\n" " ○ 「Ctrl + c」: (빈 파티션이 선택된 경우,) 새 파티션 만들기.\n" "\n" " ○ 「Ctrl + d」: 파티션 삭제하기.\n" "\n" " ○ 「Ctrl + m」: 마운트 위치 지정하기.\n" "\n" "만약 PPC 컴퓨터에서 설치하고 있는 중이라면, YABOOT 부트로더가 사용할 최소 " "1MB\n" "의 HFS 「부트스트랩」파티션을 만들 필요가 있습니다. 만약 그 파티션을 보다 크" "게\n" "(가령, 50MB) 만들면, 응급 상황시에 사용할 여분의 커널과 램디스크 이미지를\n" "저장할 수 있는 유용한 장소가 될 것입니다." #: ../../help.pm:1 #, c-format msgid "" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs." msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error installing packages:" msgstr "다음 팩키지를 설치중 오류가 발생했습니다: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Lexmark inkjet configuration" msgstr "렉스마크 잉크젯 설정" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Undo" msgstr "되돌리기" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Save partition table" msgstr "파티션 테이블 저장" #: ../../keyboard.pm:1 #, c-format msgid "Finnish" msgstr "핀란드" #: ../../lang.pm:1 #, c-format msgid "Macedonia" msgstr "마케도니아" #: ../../any.pm:1 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Slovenian" msgstr "슬로베니아" #: ../../security/help.pm:1 #, c-format msgid "" "Authorize:\n" "\n" "- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " "set to \"ALL\",\n" "\n" "- only local ones if set to \"LOCAL\"\n" "\n" "- none if set to \"NONE\".\n" "\n" "To authorize the services you need, use /etc/hosts.allow (see hosts.allow" "(5))." msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Libya" msgstr "라이베리아" #: ../../standalone/drakgw:1 #, c-format msgid "Configuring scripts, installing software, starting servers..." msgstr "스크립트 설정 중, 소프트웨어 설치 중, 서버 시작 중..." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer on parallel port #%s" msgstr "프린터 호스트명 또는 IP" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" #: ../../any.pm:1 #, c-format msgid "Table" msgstr "테이블" #: ../../fs.pm:1 #, c-format msgid "I don't know how to format %s in type %s" msgstr "%s는 %s 유형이므로 포맷할수 없습니다." #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "Model" msgstr "모델" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "USB printer #%s" msgstr "프린터 없음" #: ../../standalone/drakTermServ:1 #, c-format msgid "Stop Server" msgstr "서버 중지" #: ../../standalone/drakboot:1 #, c-format msgid "" "\n" "Select the theme for\n" "lilo and bootsplash,\n" "you can choose\n" "them separately" msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Modem" msgstr "모델" #: ../../lang.pm:1 #, c-format msgid "Tuvalu" msgstr "투발루" #: ../../help.pm:1 ../../network/netconnect.pm:1 #, c-format msgid "Use auto detection" msgstr "자동검색 사용" #: ../../services.pm:1 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM은 텍스트 기반 프로그램들에게 마우스 기능을 지원합니다.\n" "또한 콘솔 화면에서 잘라서 붙이기와 팝업 메뉴 기능을 \n" "지원합니다." #: ../../standalone/drakconnect:1 #, c-format msgid "Started on boot" msgstr "부팅시 시작됨" #: ../../share/advertising/12-mdkexpert.pl:1 #, c-format msgid "" "Join the MandrakeSoft support teams and the Linux Community online to share " "your knowledge and help others by becoming a recognized Expert on the online " "technical support website:" msgstr "" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "No password aging for" msgstr "암호 없음" #: ../../standalone/draksec:1 #, c-format msgid "" "The following options can be set to customize your\n" "system security. If you need an explanation, look at the help tooltip.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Automatically find available printers on remote machines" msgstr "" #: ../../lang.pm:1 #, c-format msgid "East Timor" msgstr "동티모르" #: ../../standalone/drakbackup:1 #, c-format msgid "On Tape Device" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Login name" msgstr "도메인 이름" #: ../../security/l10n.pm:1 #, c-format msgid "Report unowned files" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Del profile..." msgstr "프로파일 지우기" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing Foomatic..." msgstr "Foomatic 설치 중..." #: ../../standalone/XFdrake:1 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "로그아웃하고 Crtl-Alt-BackSpace키를 누르세요." #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "detected" msgstr "%s 발견" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "The network needs to be restarted. Do you want to restart it ?" msgstr "팩키지 %s가 필요합니다. 설치하겠습니까?" #: ../../standalone/drakbug:1 #, c-format msgid "Package: " msgstr "팩키지:" #: ../../standalone/drakboot:1 #, c-format msgid "Can't write /etc/sysconfig/bootsplash." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SECURITY WARNING!" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "StarOffice" msgstr "스타 오피스" #: ../../standalone/drakboot:1 #, c-format msgid "No, I don't want autologin" msgstr "아니오, 자동로그인을 사용하지 않습니다." #: ../../standalone/drakbug:1 #, c-format msgid "Windows Migration tool" msgstr "윈도우즈 이주 도구" #: ../../any.pm:1 ../../help.pm:1 #, fuzzy, c-format msgid "All languages" msgstr "언어 선택" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Removing %s" msgstr "%s 제거 중" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "%s not found...\n" msgstr "폰트를 찾을 수 없습니다." #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Testing your connection..." msgstr "연결 테스트 중..." #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Cache size" msgstr "크기" #: ../../security/level.pm:1 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "암호기능이 적용되지만, 네트웍에 연결된 컴퓨터로 사용하기에는 아직 적절하지 않" "습니다." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Start sector: " msgstr "시작 섹터: " #: ../../lang.pm:1 #, c-format msgid "Congo (Brazzaville)" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Read" msgstr "재시도" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "팩키지 %s가 필요합니다. 설치하겠습니까?" #: ../../lang.pm:1 #, c-format msgid "Seychelles" msgstr "세이셸" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Bad password on %s" msgstr "암호 없음" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Right Control key" msgstr "원격 제어" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "" "Insert a FAT formatted floppy in drive %s with %s in root directory and " "press %s" msgstr "플로피 디스크를 %s 드라이브에 넣으세요" #: ../../lang.pm:1 #, c-format msgid "Zambia" msgstr "잠비아" #: ../../security/level.pm:1 #, c-format msgid "Security Administrator (login or email)" msgstr "보안 관리자 (로그인 또는 이메일)" #: ../../standalone/drakgw:1 #, c-format msgid "Sorry, we support only 2.4 kernels." msgstr "죄송합니다. 2.4 커널만 지원됩니다." #: ../../keyboard.pm:1 #, c-format msgid "Romanian (qwerty)" msgstr "로만 (QWERTY)" #: ../../standalone/drakbackup:1 #, c-format msgid "Under Devel ... please wait." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Egypt" msgstr "이집트" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Czech Republic" msgstr "체코 공화국" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Sound card" msgstr "사운드 카드" #: ../../standalone/drakfont:1 #, c-format msgid "Import Fonts" msgstr "폰트 수입" #: ../../diskdrake/hd_gtk.pm:1 #, fuzzy, c-format msgid "" "You have one big MicroSoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "하나의 큰 도스 파티션을 가지고 있습니다.\n" "(일반적으로 마이크로소프트의 도스/윈도우즈에서 사용).\n" "먼저 그 파티션의 크기를 조정할 것을 권장합니다.\n" "(그것을 클릭한후, \"크기조정\"을 클릭하세요.)" #: ../../standalone/drakfont:1 #, c-format msgid "Suppress Temporary Files" msgstr "임시 파일 은폐" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "\n" msgstr "" "축하합니다. 네트웍/인터넷 설정이 완료되었습니다.\n" "\n" "이제 설정이 시스템에 적용될 것입니다.\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Change partition type" msgstr "파티션 유형 변경" #: ../../help.pm:1 #, c-format msgid "" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "hardware. Choose the one that best suits your needs (you will be able to\n" "change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor." msgstr "" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Network Options" msgstr "추가 옵션" #: ../../security/l10n.pm:1 #, c-format msgid "Enable msec hourly security check" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "" "Display theme\n" "under console" msgstr "" "콘솔하에서\n" "테마 보이기" #: ../../standalone/net_monitor:1 #, c-format msgid "Statistics" msgstr "" #: ../../printer/cups.pm:1 #, c-format msgid "(on %s)" msgstr "(%s에)" #: ../../mouse.pm:1 #, c-format msgid "MM Series" msgstr "MM 시리즈" #: ../../security/level.pm:1 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "버퍼 넘침이나 형식화 문자열 공격을 막는 라이브러리." #: ../../standalone/net_monitor:1 #, c-format msgid "average" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "New printer name" msgstr "새 프린터 이름" #: ../../fs.pm:1 #, c-format msgid "" "Allow an ordinary user to mount the file system. The\n" "name of the mounting user is written to mtab so that he can unmount the " "file\n" "system again. This option implies the options noexec, nosuid, and nodev\n" "(unless overridden by subsequent options, as in the option line\n" "user,exec,dev,suid )." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Equatorial Guinea" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup System" msgstr "백업 시스템" #: ../../standalone/drakbackup:1 #, c-format msgid "Build Backup" msgstr "백업 빌드" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" "명령행(터미널 윈도우)에서 파일을 인쇄하려면, 「%s <파일>」 또는 「%s <파일>」" "명령을 사용하세요.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Currently, no alternative possibility is available" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Romanian (qwertz)" msgstr "로만 (QWERTZ)" #: ../../standalone/drakTermServ:1 #, c-format msgid "Write Config" msgstr "설정 기록" #: ../../services.pm:1 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "Routed 데몬은 RIP 프로토콜을 통해 자동으로 IP 라우터 테이블이 갱신되도록 합니" "다.\n" "RIP는 소규모 네트웍을 위한 것이기 때문에, 대규모 네트웍을 위해서는 보다 복잡" "한\n" "라우팅 프로토콜이 필요합니다." #: ../../lang.pm:1 #, c-format msgid "Kiribati" msgstr "키리바시" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" msgstr "로지텍 마우스 (시리얼, 오래된 C7 형태)" #: ../../standalone/drakbackup:1 #, c-format msgid "Other (not drakbackup) keys in place already" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n" "\n" "You will be presented with a list of different parameters to change to get\n" "an optimal graphical display: Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " The installer will normally automatically detect and configure the\n" "monitor connected to your machine. If it is incorrect, you can choose from\n" "this list the monitor you actually have connected to your computer.\n" "\n" "\n" "\n" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "hardware. Choose the one that best suits your needs (you will be able to\n" "change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor.\n" "\n" "\n" "\n" "Test\n" "\n" " the system will try to open a graphical screen at the desired\n" "resolution. If you can see the message during the test and answer \"%s\",\n" "then DrakX will proceed to the next step. If you cannot see the message, it\n" "means that some part of the autodetected configuration was incorrect and\n" "the test will automatically end after 12 seconds, bringing you back to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " Here you can choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"%s\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Browse" msgstr "찾아보기" #: ../../harddrake/data.pm:1 #, c-format msgid "CDROM" msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "지금 인터넷 연결을 시도해 보시겠습니까?" #: ../../keyboard.pm:1 #, c-format msgid "Belgian" msgstr "벨기에" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Do you have an ISA sound card?" msgstr "ISA 사운드 카드가 있습니까?" #: ../../network/ethernet.pm:1 #, c-format msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" "어떠한 네트웍 어댑터도 감지되지 않았습니다.\n" "연결 설정을 할 수 없습니다." #: ../../diskdrake/hd_gtk.pm:1 #, fuzzy, c-format msgid "Windows" msgstr "윈도우즈 도메인" #: ../../common.pm:1 #, c-format msgid "Can't make screenshots before partitioning" msgstr "파티션을 나누기 전에는 스크린샷을 만들 수 없습니다." #: ../../standalone/drakbackup:1 #, c-format msgid "Host Name" msgstr "호스트명" #: ../../standalone/logdrake:1 #, c-format msgid "/File/Save _As" msgstr "/파일(F)/다른 이름으로 저장(_A)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To get access to printers on remote CUPS servers in your local network you " "only need to turn on the \"Automatically find available printers on remote " "machines\" option; the CUPS servers inform your machine automatically about " "their printers. All printers currently known to your machine are listed in " "the \"Remote printers\" section in the main window of Printerdrake. If your " "CUPS server(s) is/are not in your local network, you have to enter the IP " "address(es) and optionally the port number(s) here to get the printer " "information from the server(s)." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "" #: ../../any.pm:1 #, c-format msgid "Delay before booting default image" msgstr "기본 이미지로 부팅될 때까지 지연시간" #: ../../any.pm:1 #, c-format msgid "Restrict command line options" msgstr "명령행 옵션을 제한합니다." #: ../../standalone/drakxtv:1 #, c-format msgid "East Europe" msgstr "동유럽" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Use free space" msgstr "빈 공간 사용" #: ../../network/adsl.pm:1 #, c-format msgid "use dhcp" msgstr "DHCP 사용" #: ../../standalone/logdrake:1 #, c-format msgid "Mail alert" msgstr "메일 경고" #: ../../network/tools.pm:1 #, c-format msgid "Internet configuration" msgstr "인터넷 설정" #: ../../lang.pm:1 #, c-format msgid "Uzbekistan" msgstr "우즈베키스탄" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Detected %s" msgstr "%s 발견" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/Autodetect _printers" msgstr "자동 검색됨" #: ../../interactive.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #, c-format msgid "Finish" msgstr "종료" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Show automatically selected packages" msgstr "자동으로 선택된 팩키지들 보이기" #: ../../lang.pm:1 #, c-format msgid "Togo" msgstr "통고" #: ../../standalone/harddrake2:1 #, c-format msgid "CPU flags reported by the kernel" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "16 MB" msgstr "16 MB" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Please try again" msgstr "다시 시도하세요." #: ../../printer/printerdrake.pm:1 #, c-format msgid "The model is correct" msgstr "모델이 정확합니다." #: ../../install_interactive.pm:1 #, c-format msgid "FAT resizing failed: %s" msgstr "FAT크기조정 실패: %s" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 #, c-format msgid "Individual package selection" msgstr "개별 팩키지 선택" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This partition is not resizeable" msgstr "이 파티션은 크기변경이 허용되지 않습니다." #: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 #, c-format msgid "Location" msgstr "위치" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable-hrc)" msgstr "미국 (케이블-HRC)" #: ../../lang.pm:1 #, c-format msgid "Guatemala" msgstr "과테말라" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Journalised FS" msgstr "저널화 FS" #: ../../security/l10n.pm:1 #, c-format msgid "Ethernet cards promiscuity check" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "This machine" msgstr "(이 서버상의)" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "DOS 드라이브 문자: %s (단지 추측일 뿐임)\n" #: ../../lang.pm:1 #, c-format msgid "Bahrain" msgstr "바레인" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Select the files or directories and click on 'OK'" msgstr "폰트 파일이나 디렉토리를 선택 후, '추가'를 누르세요." #: ../../standalone/drakfloppy:1 #, c-format msgid "omit scsi modules" msgstr "SCSI 모듈 생략" #: ../../standalone/harddrake2:1 #, c-format msgid "family of the cpu (eg: 6 for i686 class)" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "지금 네트웍을 사용하여 설치하고 있는 중이므로, 네트웍 설정은 이미 되어 있습니" "다.\n" "「확인」을 눌러 현재 설정을 유지하거나, 「취소」를 눌러 인터넷/네트웍 연결을 " "다시 설정하세요.\n" #: ../../security/l10n.pm:1 #, c-format msgid "Run the daily security checks" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "Keyboard layout: %s\n" msgstr "키보드 형태: %s\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here you can choose whether the printers connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Maltese (US)" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "The creation of the boot floppy has been successfully completed \n" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "네트웍 파일 시스템(NFS), 삼바(SMB/랜 관리자/윈도우즈), 그리고\n" "NCP(넷웨어)를 마운트하고 언마운트합니다." #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Launch the wizard" msgstr "마법사를 실행하려면 여기를 누르세요. ->" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Tvcard" msgstr "TV 카드" #: ../../help.pm:1 #, fuzzy, c-format msgid "Toggle between normal/expert mode" msgstr "일반 모드로 전환" #: ../../standalone/drakfloppy:1 #, c-format msgid "Size" msgstr "크기" #: ../../help.pm:1 #, fuzzy, c-format msgid "GRUB" msgstr "GB" #: ../../lang.pm:1 #, c-format msgid "Greenland" msgstr "그린랜드" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "로지텍 마우스맨+/퍼스트마우스+" #: ../../standalone/drakbackup:1 #, c-format msgid "Thursday" msgstr "목요일" #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "인터넷 연결공유 설정은 이미 완료되었습니다.\n" "현재 가능한 상태입니다.\n" "\n" "무슨 작업을 하시겠습니까?" #: ../../standalone/drakTermServ:1 #, c-format msgid "Delete All NBIs" msgstr "모든 NBI 삭제" #: ../../help.pm:1 #, c-format msgid "" "This dialog allows you to fine tune your bootloader:\n" "\n" " * \"%s\": there are three choices for your bootloader:\n" "\n" " * \"%s\": if you prefer grub (text menu).\n" "\n" " * \"%s\": if you prefer LILO with its text menu interface.\n" "\n" " * \"%s\": if you prefer LILO with its graphical interface.\n" "\n" " * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n" "you prefer, the bootloader can be installed on the second hard drive\n" "(\"%s\"), or even on a floppy disk (\"%s\");\n" "\n" " * \"%s\": after a boot or a reboot of the computer, this is the delay\n" "given to the user at the console to select a boot entry other than the\n" "default.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" "\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n" "system! Be sure you know what you are doing before changing any of the\n" "options. !!\n" "\n" "Clicking the \"%s\" button in this dialog will offer advanced options which\n" "are normally reserved for the expert user." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Which configuration of XFree do you want to have?" msgstr "어느 XFree 설정을 선택하시겠습니까?" #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/interactive.pm:1 #, c-format msgid "More" msgstr "추가 옵션" #: ../../standalone/drakbackup:1 #, c-format msgid "" "This uses the same syntax as the command line program 'cdrecord'. 'cdrecord -" "scanbus' would also show you the device number." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "이 보안등급으로 이 시스템을 서버로 운용할 수 있게 됩니다.\n" "이 보안등급은 외부의 클라이언트들의 접속을 받아들이는데 있어서 \n" "충분히 높은 보안등급입니다. 주의: 인터넷 클라이언트로 컴퓨터를 사용한다면, " "더 낮은 등급을 선택하세요." #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Server Name" msgstr "서버 이름:" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Password" msgstr "계정 암호" #: ../../standalone/drakhelp:1 #, c-format msgid "" "%s cannot be displayed \n" ". No Help entry of this type\n" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this\n" "operation is dangerous. If you have not already done so, you\n" "first need to exit the installation, run \"chkdsk c:\" from a\n" "Command Prompt under Windows (beware, running graphical program\n" "\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" "Command Prompt!), optionally run defrag, then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "경고!\n" "\n" "드레이크X가 이제 윈도우즈 파티션의 크기를 조정할 것입니다. 이 작동은 \n" "위험합니다. 아직 시작하지 않았다면, 설치를 중단하고 윈도우즈에서\n" "디스크검사」(가능하다면 또한 「디스크 조각모음」)를 실행한 후에,\n" "설치를 다시 시작하세요. 또한 데이터도 백업해 두세요.\n" "준비됐으면, 「확인」을 누르세요." #: ../../keyboard.pm:1 #, c-format msgid "Tajik keyboard" msgstr "타지크 키보드" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" "스풀러 %s를 위해 사용한 프린터 설정을 현재 스풀러인 %s로 복사할 수 있습니다. " "모든 설정 데이터(프린터명, 설명, 위치, 연결 유형, 그리고 기본 옵션값들)가 넘" "겨질 것입니다. 그러나 작업들은 전송되지 않습니다.\n" "다음과 같은 이유로인하여 모든 큐가 전송될 수는 없습니다:\n" #: ../../standalone/drakfont:1 #, c-format msgid "Font List" msgstr "폰트 목록" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "부트로더가 제대로 작동하기 위해서는 공개 펌웨어 부트 장치를 변경할 필요성이\n" "있을 수도 있습니다. 만약 재부팅후에 부트로더 프롬프트가 나타나지 않는다면,\n" "재부팅시에 명령-옵션-O-F를 계속 누르고 있다가 다음과 같이 입력하세요:\n" "setenv boot-device %s,\\\\:tbxi\n" "shut-down\n" "그러고나면 다음부터는 부트로더 프롬프트를 볼 수 있을 것입니다." #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX or some other means to boot your machine" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Select file" msgstr "파일을 선택하세요." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Choose the network or host on which the local printers should be made " "available:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Japan" msgstr "일본" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print option list" msgstr "프린터 옵션 목록" #: ../../standalone/localedrake:1 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "변경이 완료 되었지만, 적용되기 위해서는 재로그인해야 합니다." #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Country / Region" msgstr "국가" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Search servers" msgstr "서버 검색" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP queue name missing!" msgstr "NCP 큐 이름을 찾을 수 없음!" #: ../../standalone/net_monitor:1 #, c-format msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "「%s」라고 표시된 CDROM" #: ../../standalone/drakbackup:1 #, c-format msgid "CDRW media" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "고품질의 난수 생성을 위해 시스템 엔트로피 풀을 저장하고 \n" "복구합니다." #: ../../share/advertising/07-server.pl:1 #, c-format msgid "Turn your computer into a reliable server" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Check empty password in /etc/shadow" msgstr "" #: ../../network/network.pm:1 #, c-format msgid " (driver %s)" msgstr " (%s 드라이버)" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "루프백 파일(들):\n" " %s\n" #: ../../network/isdn.pm:1 #, c-format msgid "I don't know" msgstr "모르겠음" #: ../../services.pm:1 #, c-format msgid "Start when requested" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Do you want to continue?" msgstr "" "이제 자동 설치 플로피를 만들 것입니다. 이것은 다소 위험한 작업이 될 수 있으" "며, 신중하게 사용되어져야 합니다.\n" "\n" "이것의 특징은, 일부 값을 변경하기 위하여 일부 과정에서 대화모드가 나타나기는 " "하지만, 기본적으로 이 컴퓨터에서 수행한 설치작업을 자동반복하게 합니다.\n" "\n" "안전상의 이유로, 이 컴퓨터상에서의 설치과정과는 상관없이, 파티션 나누기와 포" "맷하기는 자동으로 이루어지지 않습니다.\n" "\n" "계속 진행합니까?" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Telugu" msgstr "벨기에" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Post Uninstall" msgstr "후반 설치제거" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connecting to Internet " msgstr "인터넷에 연결" #: ../../standalone/scannerdrake:1 #, c-format msgid " (" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Cpuid level" msgstr "보안 수준" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Novell server \"%s\", printer \"%s\"" msgstr "네트웍 프린터 (소켓)" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Mongolian (cyrillic)" msgstr "세르비아 (시릴)" #: ../../standalone/drakfloppy:1 #, c-format msgid "Add a module" msgstr "모듈 추가" #: ../../standalone/drakconnect:1 #, c-format msgid "Profile to delete:" msgstr "지울 프로파일" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Local measure" msgstr "지역 파일들" #: ../../network/network.pm:1 #, c-format msgid "Warning : IP address %s is usually reserved !" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "busmouse" msgstr "버스마우스" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Create Etherboot Enabled Boot Images:\n" " \tTo boot a kernel via etherboot, a special kernel/initrd image must " "be created.\n" " \tmkinitrd-net does much of this work and drakTermServ is just a " "graphical \n" " \tinterface to help manage/customize these images. To create the " "file \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " "include in \n" " \tdhcpd.conf, you should create the etherboot images for at least " "one full kernel." msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Login (user name)" msgstr "로그인 계정(사용자명)" #: ../../standalone/harddrake2:1 #, c-format msgid "Fdiv bug" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Accept broadcasted icmp echo" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Uruguay" msgstr "우루과이" #: ../../lang.pm:1 #, c-format msgid "Benin" msgstr "베닌" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "SMB/Windows server \"%s\", share \"%s\"" msgstr "삼바/윈도우즈 95/98/NT상의 프린터" #: ../../standalone/drakperm:1 #, c-format msgid "Path selection" msgstr "경로 선택" #: ../../standalone/scannerdrake:1 #, c-format msgid "Name/IP address of host:" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor: %s\n" msgstr "모니터: %s\n" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Custom & system settings" msgstr "사용자 정의 파티션 나누기" #: ../../partition_table/raw.pm:1 #, fuzzy, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" "하드드스크에 이상이 발생했습니다. \n" "데이터 무결성 검사가 실패했습니다. \n" "이것은 디스크에 기록되는 데이터를 잃어 버린다는 것을 의미합니다." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer host name or IP missing!" msgstr "프린터 호스트명 또는 IP가 지정되지 않았습니다!" #: ../../standalone/drakbackup:1 #, c-format msgid "Please check all users that you want to include in your backup." msgstr "백업에 포함할 모든 사용자를 확인하세요." #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the Mandrake Control Center in Hardware " "section." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Bangladesh" msgstr "방글라데시" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (cable)" msgstr "일본 (케이블)" #: ../../standalone/drakfont:1 #, c-format msgid "Initial tests" msgstr "초기화 테스트" #: ../../network/isdn.pm:1 #, c-format msgid "Continue" msgstr "계속" #: ../../standalone/drakbackup:1 #, c-format msgid "Custom Restore" msgstr "사용자 정의 복구" #: ../../standalone/drakbackup:1 #, c-format msgid "Saturday" msgstr "토요일" #: ../../help.pm:1 #, c-format msgid "" "\"%s\": if a sound card is detected on your system, it is displayed here.\n" "If you notice the sound card displayed is not the one that is actually\n" "present on your system, you can click on the button and choose another\n" "driver." msgstr "" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Set the root umask." msgstr "암호 없음" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Script-based" msgstr "스크립트 기반" #: ../../install_any.pm:1 ../../partition_table.pm:1 #, c-format msgid "Error reading file %s" msgstr "%s 파일을 읽는중 오류가 발생했습니다." #: ../../harddrake/v4l.pm:1 #, c-format msgid "PLL setting:" msgstr "PLL 설정:" #: ../../install_interactive.pm:1 ../../install_steps.pm:1 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "「/boot/efi」에 마운트된 FAT 파티션이 있어야만 합니다." #: ../../printer/printerdrake.pm:1 #, c-format msgid " on " msgstr "" #: ../../diskdrake/dav.pm:1 #, c-format msgid "The URL must begin with http:// or https://" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" "프린터 액세스 주소를 직접 지정할 수 있습니다. 주소는 CUPS 또는 Foomatic 규정" "을 준수해야 합니다. 그렇지 않은 주소는 모든 스풀러가 지원하지 않습니다." #: ../../any.pm:1 #, c-format msgid "Other OS (SunOS...)" msgstr "기타 OS (SunOS...)" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Install/Upgrade" msgstr "설치/업데이트" #: ../../install_steps_gtk.pm:1 #, c-format msgid "%d packages" msgstr "%d 팩키지" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Costa Rica" msgstr "코스타리카" #: ../../standalone.pm:1 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Domain Authentication Required" msgstr "도메인 인증이 필요합니다." #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" "\n" " Thanks:\n" "\t- LTSP Project http://www.ltsp.org\n" "\t- Michael Brown \n" "\n" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Use libsafe for servers" msgstr "서버에 대해 libsafe 사용" #: ../../keyboard.pm:1 #, c-format msgid "Icelandic" msgstr "아이슬랜드" #: ../../standalone.pm:1 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Maximum size\n" " allowed for Drakbackup (MB)" msgstr "" #: ../../loopback.pm:1 #, c-format msgid "Circular mounts %s\n" msgstr "순환 마운트 %s\n" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo/grub mode" msgstr "LILO/Grub 모드" #: ../../lang.pm:1 #, c-format msgid "Martinique" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "HardDrive / NFS" msgstr "하드 디스크 / NFS" #: ../../standalone/drakbackup:1 #, c-format msgid "Old user list:\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Search Backups" msgstr "" #: ../../modules/parameters.pm:1 #, c-format msgid "a number" msgstr "번호" #: ../../keyboard.pm:1 #, c-format msgid "Swedish" msgstr "스웨덴" #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../modules/interactive.pm:1 #, c-format msgid "Which %s driver should I try?" msgstr "어떤 %s 드라이버를 시도해 봅니까?" #: ../../standalone/logdrake:1 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Weekday" msgstr "수요일" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Filesystem types:" msgstr "파일시스템 유형:" #: ../../lang.pm:1 #, c-format msgid "Northern Mariana Islands" msgstr "북 마리아나 제도" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on HP JetDirect" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "none" msgstr "없음" #: ../../standalone/drakconnect:1 #, c-format msgid "" "Name of the profile to create (the new profile is created as a copy of the " "current one) :" msgstr "" "만들 프로파일 이름 (새 프로파일은 현재 프로파일의 사본으로서 만들어 집니다.):" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Floppy" msgstr "부트 플로피" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript referencing" msgstr "고스트스크립트 참조" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Bootloader" msgstr "사용할 부트로더" #: ../../security/l10n.pm:1 #, c-format msgid "Authorize all services controlled by tcp_wrappers" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Move" msgstr "이동" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Bootloader to use" msgstr "사용할 부트로더" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB server host" msgstr "SMB 서버 호스트" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Name Servers:" msgstr "삼바 서비스" #: ../../standalone/drakbackup:1 #, c-format msgid "Minute" msgstr "분" #: ../../install_messages.pm:1 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "/_Expert mode" msgstr "전문가 모드" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" "리눅스 가상 서버, 고성능 서버 구축에\n" "사용됩니다." #: ../../lang.pm:1 #, c-format msgid "Micronesia" msgstr "미크로네시아" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "4 billion colors (32 bits)" msgstr "40억 색상 (32 bits)" #: ../../steps.pm:1 #, c-format msgid "License" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to generate the keys." msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "" "Here, you can setup the security level and administrator of your machine.\n" "\n" "\n" "The Security Administrator is the one who will receive security alerts if " "the\n" "'Security Alerts' option is set. It can be a username or an email.\n" "\n" "\n" "The Security Level menu allows you to select one of the six preconfigured " "security levels\n" "provided with msec. These levels range from poor security and ease of use, " "to\n" "paranoid config, suitable for very sensitive server applications:\n" "\n" "\n" "Poor: This is a totally unsafe but " "very\n" "easy to use security level. It should only be used for machines not " "connected to\n" "any network and that are not accessible to everybody.\n" "\n" "\n" "Standard: This is the standard " "security\n" "recommended for a computer that will be used to connect to the Internet as " "a\n" "client.\n" "\n" "\n" "High: There are already some\n" "restrictions, and more automatic checks are run every night.\n" "\n" "\n" "Higher: The security is now high " "enough\n" "to use the system as a server which can accept connections from many " "clients. If\n" "your machine is only a client on the Internet, you should choose a lower " "level.\n" "\n" "\n" "Paranoid: This is similar to the " "previous\n" "level, but the system is entirely closed and security features are at their\n" "maximum" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "Sagem (using pppoa) usb" msgstr "" #: ../../install_any.pm:1 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "오류 발생 - 새로운 파일 시스템을 만들 어떤 올바른 장치도 찾을 수 없습니다.이 " "문제를 해결하시려면, 하드웨어를 점검해 보시기 바랍니다." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Starting the printing system at boot time" msgstr "부팅시 인쇄 시스템 자동실행" #: ../../network/netconnect.pm:1 #, c-format msgid "Do you want to start the connection at boot?" msgstr "부팅시에 연결하도록 하겠습니까?" #: ../../standalone/harddrake2:1 #, c-format msgid "Processor ID" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Sound trouble shooting" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwerty layout)" msgstr "폴란드 (QwertY)" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "/_Add Printer" msgstr "프린터" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessable by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" "지금 님은 보안수준 %2$s로 운용되는 시스템에\n" "인쇄 시스템 %1$s을 설치하려고 합니다.\n" "\n" "인쇄 시스템은 인쇄작업을 기다렸다가 처리하는\n" "대몬(백그라운드 프로세스)를 실행시킵니다.\n" "원격 시스템에서 네트웍으로 이 대몬에 접근할 수도\n" "있기 때문에, 크래커들의 사냥감이 되기도 합니다.\n" "따라서 현재 보안 수준에서는 단지 몇몇의 매몬들만\n" "실행되도록 선택되는 것이 기본입니다.\n" "\n" "정말로 이 컴퓨터상의 인쇄 설정을\n" "원하십니까? " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Host \"%s\", port %s" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This partition can't be used for loopback" msgstr "이 파티션은 loopback으로 사용될 수 없습니다." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "File already exists. Use it?" msgstr "파일이 이미 존재합니다. 그것을 사용합니까?" #: ../../standalone/net_monitor:1 #, c-format msgid "received: " msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Right Alt key" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Gateway" msgstr "게이트웨이" #: ../../lang.pm:1 #, c-format msgid "Tonga" msgstr "통가" #: ../../lang.pm:1 #, c-format msgid "Tunisia" msgstr "튀니지" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Scanner sharing" msgstr "파일 공유" #: ../../standalone/drakconnect:1 #, c-format msgid "Profile: " msgstr "프로파일: " #: ../../standalone/harddrake2:1 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid autologin." msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "XawTV isn't installed!" msgstr "XawTV가 설치되지 않았습니다!" #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "old static device name used in dev package" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Enable the logging of IPv4 strange packets" msgstr "" #: ../../any.pm:1 #, c-format msgid "This label is already used" msgstr "이 항목명은 이미 사용되고 있습니다." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you don't need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Greek (polytonic)" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "%s 파티션을 포맷하면, 모든 데이타를 잃게 됩니다." #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connection Time: " msgstr "연결 유형: " #: ../../standalone/livedrake:1 #, c-format msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" "설치 CD-ROM을 넣은 후에 「확인」을 누르세요.\n" "CD-ROM이 없다면, 「취소」를 라이브 업그레이드를 취소하세요." #: ../../standalone/drakperm:1 #, c-format msgid "Use group id for execution" msgstr "실행시 그룹 아이디 사용" #: ../../any.pm:1 #, c-format msgid "Choose the default user:" msgstr "기본 사용자를 선택하세요:" #: ../../lang.pm:1 #, c-format msgid "Gabon" msgstr "가봉" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these " "printers will be automatically detected." msgstr "" "\n" "원격 CUPS 서버의 프린터는 여기서 설정할 필요가 \n" "없습니다; 이런 프린터는 자동으로 감지되어 집니다. 이와 같은 경우\n" "「원격 CUPS 서버의 프린터」를 선택하세요." #: ../../any.pm:1 #, c-format msgid "" "Mandrake Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "설치후 다른 다른 언어를 선택할수 있습니다." #: ../../standalone/drakbackup:1 #, c-format msgid "Directory (or module) to put the backup on this host." msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Domain" msgstr "도메인" #: ../../any.pm:1 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "옵션: 정확한 메모리 용량 (%d MB 발견)" #: ../../help.pm:1 #, c-format msgid "" "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" "automated. DrakX will analyze the disk boot sector and act according to\n" "what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. This way you will be able to load either GNU/Linux or another\n" "OS.\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "If it cannot make a determination, DrakX will ask you where to place the\n" "bootloader." msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider dns 2 (optional)" msgstr "공급자 DNS 2 (옵션)" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Boot device" msgstr "부트 장치" #: ../../install_interactive.pm:1 #, c-format msgid "Which partition do you want to resize?" msgstr "어떤 파티션의 크기를 조정하시겠습니까?" #: ../../lang.pm:1 #, c-format msgid "United States Minor Outlying Islands" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Djibouti" msgstr "지부티" #: ../../standalone/logdrake:1 #, c-format msgid "A tool to monitor your logs" msgstr "로그 분석 도구" #: ../../network/netconnect.pm:1 #, c-format msgid "detected on port %s" msgstr "%s 포트에서 발견" #: ../../printer/data.pm:1 #, c-format msgid "LPD" msgstr "LPD" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphics card: %s\n" msgstr "그래픽 카드: %s\n" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "/Set as _Default" msgstr " (기본값)" #: ../../security/l10n.pm:1 #, c-format msgid "Accept icmp echo" msgstr "" #: ../../bootloader.pm:1 #, c-format msgid "Yaboot" msgstr "Yaboot" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Logitech CC Series with Wheel emulation" msgstr "로지텍 CC 시리즈" #: ../../standalone/drakboot:1 #, c-format msgid "Splash selection" msgstr "스플래쉬 선택" #: ../../partition_table.pm:1 #, c-format msgid "Extended partition not supported on this platform" msgstr "이 시스템에서는 확장파티션이 지원되지 않습니다." #: ../../network/isdn.pm:1 #, c-format msgid "ISDN Configuration" msgstr "ISDN 설정" #: ../../printer/printerdrake.pm:1 #, c-format msgid "high" msgstr "높음" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing" msgstr "인터넷 연결 공유" #: ../../standalone/logdrake:1 #, c-format msgid "Choose file" msgstr "파일 선택" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Summary: " msgstr "요약설명" #: ../../network/shorewall.pm:1 #, c-format msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fixes after installation." msgstr "" "경고! 기존의 방화벽 설정이 감지되었습니다. 설치가 끝난 후에 직접 수정할 필요" "가 있습니다." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "프린터「%s」상에서 인쇄 중" #: ../../security/l10n.pm:1 #, c-format msgid "Daily security check" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer default settings" msgstr "프린터 모델 선택" #: ../../standalone/harddrake2:1 #, c-format msgid "" "the WP flag in the CR0 register of the cpu enforce write proctection at the " "memory page level, thus enabling the processor to prevent unchecked kernel " "accesses to user memory (aka this is a bug guard)" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Generic PS2 Wheel Mouse" msgstr "일반적인 PS2 휠 마우스" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing old printer \"%s\"..." msgstr "기존 프린터 「%s」 제거 중 ..." #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Select a device !" msgstr "스캐너 선택" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remove selected server" msgstr "선택 항목 제거" #: ../../network/adsl.pm:1 #, c-format msgid "Sagem (using dhcp) usb" msgstr "" #: ../../lang.pm:1 #, c-format msgid "French Southern Territories" msgstr "프랑스령 남 자치구역" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the processor" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain %s:\n" " \tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" " \thelps in this respect by adding or removing system users from this " "file." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All data on this partition should be backed-up" msgstr "이 파티션의 모든 데이타를 백업하여야 합니다." #: ../../install_steps_gtk.pm:1 #, c-format msgid "Installing package %s" msgstr "%s 팩키지 설치중" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking device and configuring HPOJ..." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "더 많은 파티션을 만드실려면, 확장 파티션을 만들수 있도록 주파티션 하나를 지우" "세요." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" #: ../../steps.pm:1 #, c-format msgid "Choose packages to install" msgstr "설치 팩키지 선택" #: ../../install_interactive.pm:1 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "%s 드라이브 상의 모든 기존 파티션과 데이터가 손실될 것입니다." #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "설치 또는 업그레이드를 위한 디스크 공간이 부족합니다. (%d > %d)" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" "모든 프린터는 이름이 있어야 합니다.(예, lp)\n" "설명과 위치 부분을 입력할 필요는 없습니다.\n" "그것들은 단지 사용자들을 위한 부연설명일 뿐입니다." #: ../../help.pm:1 #, c-format msgid "" "\"%s\": clicking on the \"%s\" button will open the printer configuration\n" "wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" "information on how to setup a new printer. The interface presented there is\n" "similar to the one used during installation." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Bhutan" msgstr "부탄" #: ../../standalone/drakgw:1 #, c-format msgid "Network interface" msgstr "네트웍 인터페이스" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Disconnection from Internet failed." msgstr "인터넷에 연결" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Reading printer data..." msgstr "프린터 데이터 읽는 중 ..." #: ../../keyboard.pm:1 #, c-format msgid "Korean keyboard" msgstr "한글 키보드" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Not connected" msgstr "연결 안됨" #: ../../keyboard.pm:1 #, c-format msgid "Greek" msgstr "그리스" #: ../../lang.pm:1 #, c-format msgid "Saint Kitts and Nevis" msgstr "" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Generic 3 Button Mouse with Wheel emulation" msgstr "일반적인 3버튼 마우스" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s\\@%s\n" "\n" "without being prompted for a password." msgstr "" #: ../../any.pm:1 #, c-format msgid "Enable OF Boot?" msgstr "OF 부팅 허용?" #: ../../fsedit.pm:1 #, c-format msgid "You can't use JFS for partitions smaller than 16MB" msgstr "16MB 미만의 파티션에는 JFS 파일 시스템을 사용할 수 없습니다." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Erase your RW media (1st Session)" msgstr "CDRW 매체를 사용하고 있는지 확인하세요." #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "모니터 수직주파수: %s\n" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount point" msgstr "마운트 위치" #: ../../Xconfig/test.pm:1 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "TCP/IP host \"%s\", port %s" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "User :" msgstr "사용자:" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore system" msgstr "시스템 복구" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP end ip" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Another one" msgstr "또 다른 것" #: ../../standalone/drakbackup:1 #, c-format msgid "Drakbackup" msgstr "드레이크 백업" #: ../../lang.pm:1 #, c-format msgid "Colombia" msgstr "콜롬비아" #: ../../standalone/drakgw:1 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play" msgstr "플러그앤플레이" #: ../../lang.pm:1 #, c-format msgid "Reunion" msgstr "" #: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Details" msgstr "상세설명" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "For security reasons, it will be disconnected now." msgstr "보안상의 이유로 이제 연결을 끊을 것입니다." #: ../../standalone/drakbug:1 #, c-format msgid "Synchronization tool" msgstr "동기화 도구" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking your system..." msgstr "시스템 검사 중..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print" msgstr "인쇄" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Mongolia" msgstr "몽골라" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Mounted\n" msgstr "마운트 되었음\n" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Configure CUPS" msgstr "X 설정" #: ../../help.pm:1 #, fuzzy, c-format msgid "Graphical Interface" msgstr "시작시 바로 X 실행" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Users" msgstr "사용자들 복구" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Encryption key for %s" msgstr "암호화 키" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Do you want to recover your system?" msgstr "aboot를 사용하시겠습니까?" #: ../../services.pm:1 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "포트맵퍼(portmapper)는 NFS와 NIS 같은 프로토콜에 의해 사용되는\n" "RPC 연결을 관리합니다. 포트맵 서버는 RPC 메커니즘을 이용하는 프로토콜용 서버" "로\n" "사용되고 있는 컴퓨터에는 반드시 실행되고 있어야 합니다." #: ../../standalone/harddrake2:1 #, c-format msgid "Detected hardware" msgstr "검색된 하드웨어" #: ../../lang.pm:1 #, c-format msgid "Mauritius" msgstr "모리셔스" #: ../../keyboard.pm:1 #, c-format msgid "Myanmar (Burmese)" msgstr "" #: ../../fs.pm:1 #, fuzzy, c-format msgid "Enabling swap partition %s" msgstr "%s 파티션 포맷중" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "" "loopback로 사용하거나 크기를 조정할 FAT 파티션이 없습니다. (또는 디스크 공간" "이 부족합니다.)" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (old)" msgstr "미국 (구버전)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" "프린터 「%s」가 이미 %s하에 존재함니다.\n" "덮어 쓸려면 「전송」을 누르세요.\n" "새 이름을 입력하거나 이 프린터를 지나칠 수도 있습니다." #: ../../share/advertising/12-mdkexpert.pl:1 #, c-format msgid "" "Find the solutions of your problems via MandrakeSoft's online support " "platform." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", host \"%s\", port %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Monaco" msgstr "모나코" #: ../../install_interactive.pm:1 #, c-format msgid "Partitioning failed: %s" msgstr "파티션 나누기 실패: %s" #: ../../fs.pm:1 ../../swap.pm:1 #, c-format msgid "%s formatting of %s failed" msgstr "%s 포맷 실패(드라이브 %s)" #: ../../standalone/drakxtv:1 #, c-format msgid "Canada (cable)" msgstr "캐나다 (케이블)" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "Floppy creation completed" msgstr "연결 속도" #: ../../help.pm:1 #, c-format msgid "Upgrade" msgstr "업그레이드" #: ../../help.pm:1 #, c-format msgid "Workstation" msgstr "워크스테이션" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" " %s 팩키지 설치 중... \n" "%d%%" #: ../../lang.pm:1 #, c-format msgid "Kyrgyzstan" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on USB" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "With basic documentation" msgstr "문서" #: ../../services.pm:1 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "Anancron은 주기적인 명령 스케쥴러 입니다." #: ../../install_interactive.pm:1 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "루트 파티션이 반드시 필요합니다.\n" "이를 위해서, 파티션을 생성하세요. (이미 있는 파티션을 클릭하거나).\n" "그리고 나서, ``마운트 위치''를 클릭한후 '/'으로 설정하세요." #: ../../lang.pm:1 #, c-format msgid "Western Sahara" msgstr "서부 사하라" #: ../../network/network.pm:1 #, c-format msgid "Proxy should be http://..." msgstr "프락시 이름은 httP://... 이어야 합니다." #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "South Africa" msgstr "남아프리카" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Eject tape after the backup" msgstr "테입을 사용한 백업" #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot Floppy/ISO" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Modify printer configuration" msgstr "인터넷 설정 변경" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose a partition" msgstr "파티션 선택" #: ../../standalone/drakperm:1 #, c-format msgid "Edit current rule" msgstr "현재 규칙 편집" #: ../../standalone/drakbackup:1 #, c-format msgid "%s" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Please test the mouse" msgstr "마우스를 테스트하세요." #: ../../fs.pm:1 #, c-format msgid "" "Do not update inode access times on this file system\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "3 buttons with Wheel emulation" msgstr "버튼 에뮬레이션" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Sticky-bit" msgstr "스티키 비트" #: ../../standalone/drakbackup:1 #, c-format msgid "Other Media" msgstr "다른 매체" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup system files" msgstr "시스템 파일 백업" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+" msgstr "로지텍 마우스맨/퍼스트마우스 (시리얼)" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Sector" msgstr "섹터" #: ../../lang.pm:1 #, c-format msgid "Qatar" msgstr "카타르" #: ../../any.pm:1 #, c-format msgid "LDAP Base dn" msgstr "LDAP 기반 DN" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "You can't select this package as there is not enough space left to install it" msgstr "디스크 공간이 부족하기 때문에 이 팩키지를 선택할 수 없습니다." #: ../../help.pm:1 #, fuzzy, c-format msgid "generate auto-install floppy" msgstr "자동 설치 플로피 디스크 생성" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Dialing mode" msgstr "다이얼링 모드" #: ../../services.pm:1 #, c-format msgid "File sharing" msgstr "파일 공유" #: ../../any.pm:1 #, c-format msgid "Clean /tmp at each boot" msgstr "부팅시 /tmp 디렉토리 자동 청소" #: ../../lang.pm:1 #, c-format msgid "Malawi" msgstr "말라위" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "local config: false" msgstr "지역 파일들" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "System settings" msgstr "사용자 정의 파티션 나누기" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please choose your type of mouse." msgstr "마우스 종류를 선택하세요." #: ../../standalone/harddrake2:1 #, c-format msgid "class of hardware device" msgstr "하드웨어 장치 범주" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "These are the machines and networks on which the locally connected printer" "(s) should be available:" msgstr "" #: ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "United Kingdom" msgstr "영국" #: ../../services.pm:1 #, c-format msgid "running" msgstr "실행중" #: ../../lang.pm:1 #, c-format msgid "Indonesia" msgstr "인도네시아" #: ../../standalone/draksec:1 #, c-format msgid "default" msgstr "기본값" #: ../../standalone/drakxtv:1 #, c-format msgid "France [SECAM]" msgstr "프랑스 [SECAM]" #: ../../any.pm:1 #, c-format msgid "restrict" msgstr "제한" #: ../../pkgs.pm:1 #, c-format msgid "must have" msgstr "필수 팩키지" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" "CUPS는 노벨 서버상의 프린터나 자유형식 명령어로 데이터를 보내는 프린터는 지원" "하지 않습니다.\n" #: ../../lang.pm:1 #, c-format msgid "Senegal" msgstr "세네갈" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Command line" msgstr "도메인 이름" #: ../../share/advertising/08-store.pl:1 #, c-format msgid "" "Our full range of Linux solutions, as well as special offers on products and " "other \"goodies\", are available on our e-store:" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "March" msgstr "삼월" #: ../../any.pm:1 #, c-format msgid "access to administrative files" msgstr "시스템 관리파일 액세스" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sendmail.\n" " Your report mail was not sent.\n" " Please configure sendmail" msgstr "" #: ../../fs.pm:1 #, c-format msgid "" "Do not allow set-user-identifier or set-group-identifier\n" "bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" "have suidperl(1) installed.)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Montserrat" msgstr "" #: ../../help.pm:1 #, c-format msgid "Automatic dependencies" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Swap" msgstr "스왑" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Custom settings" msgstr "사용자 정의 파티션 나누기" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Other" msgstr "다른 것들 복구" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "TV card" msgstr "TV 카드" #: ../../printer/main.pm:1 #, c-format msgid "Printer on SMB/Windows 95/98/NT server" msgstr "삼바/윈도우즈 95/98/NT상의 프린터" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "/_Configure CUPS" msgstr "X 설정" #: ../../standalone/scannerdrake:1 #, c-format msgid ", " msgstr ", " #: ../../standalone/drakbug:1 #, c-format msgid "Submit lspci" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remove selected host/network" msgstr "선택 항목 제거" #: ../../services.pm:1 #, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" "포스트픽스(Postfix)는 컴퓨터들간에 메일을 주고받는 \n" "메일 전송 에이전트 프로그램입니다." #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Uzbek (cyrillic)" msgstr "세르비아 (시릴)" #: ../../keyboard.pm:1 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "Network Hotplugging" msgstr "네트웍 환경 설정" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, reports check result to tty." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From CD" msgstr "CD로부터 복구" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "이제 인터넷 연결 공유를 위해서 님의 컴퓨터를 설정하려고 합니다.\n" "이로인해, 지역 네트웍의 다른 컴퓨터들도 이 컴퓨터의 인터넷 연결을 사용할 수 " "있게 됩니다.\n" "\n" "주의: 지역 네트웍(랜)을 목적으로 설치된 네트웍 어댑터가 있어야 합니다." #: ../../network/ethernet.pm:1 #, c-format msgid "" "Please choose which network adapter you want to use to connect to Internet." msgstr "어떤 어댑터로 인터넷에 연결할 것인지 선택하세요." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "" #: ../../share/advertising/09-mdksecure.pl:1 #, c-format msgid "" "Enhance your computer performance with the help of a selection of partners " "offering professional solutions compatible with Mandrake Linux" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Authors: " msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing is now disabled." msgstr "이제 인터넷 연결 공유가 금지되었습니다." #: ../../security/help.pm:1 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Latin American" msgstr "라틴 아메리카" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Japanese text printing mode" msgstr "인쇄시스템 변경" #: ../../standalone/harddrake2:1 #, c-format msgid "Old device file" msgstr "오래된 장치 파일" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Info: " msgstr "정보: " #: ../../interactive/stdio.pm:1 #, c-format msgid "Button `%s': %s" msgstr "버튼 「%s」: %s" #: ../../any.pm:1 ../../interactive.pm:1 ../../harddrake/sound.pm:1 #: ../../standalone/drakbug:1 ../../standalone/drakconnect:1 #: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1 #: ../../standalone/service_harddrake:1 #, c-format msgid "Please wait" msgstr "기다려 주세요" #: ../../mouse.pm:1 #, c-format msgid "Genius NetMouse" msgstr "지니어스 넷마우스" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "None" msgstr "완료" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "The entered IP is not correct.\n" msgstr "모델이 정확합니다." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please be sure that the cron daemon is included in your services." msgstr "백업에 포함할 모든 사용자를 확인하세요." #: ../../standalone/drakconnect:1 #, c-format msgid "Ethernet Card" msgstr "이더넷 카드" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Delete selected printer" msgstr "선택된 규칙 삭제" #: ../../services.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Info" msgstr "정보" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Install" msgstr "설치" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Click on \"%s\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"%s\" to stop this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" "이 하드디스크상의 모든 데이터와 파티션을 삭제하려면, 「확인」을 누르세요.\n" "!!주의하세요!!일단 「확인」을 누르게 되면, MS 윈도우즈 데이털르 포함하여 이 " "디스트상의 모든\n" "데이터와 파티션은 복구가 불가능해 집니다.\n" "\n" "이 작업을 취소하려면, 지금 「취소」를 누르세요. 어떠한 데이터와 파티션도\n" "손상되지 않을 것입니다." #: ../../steps.pm:1 #, c-format msgid "Exit install" msgstr "설치 종료" #: ../../standalone/drakgw:1 #, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" "모든 것이 설정되었습니다.\n" "이제 자동 네트웍 설정기능(DHCP)으로 지역 네트워상의 다른 컴퓨터와 인터넷 연" "결 공유를 할 수 있습니다." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Remote CUPS server" msgstr "원격 CUPS 서버" #: ../../mouse.pm:1 #, c-format msgid "Sun - Mouse" msgstr "Sun - 마우스" #: ../../standalone/drakgw:1 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "시스템에 오직 하나의 설정된 네트웍 어댑터가 있습니다:\n" "\n" "%s\n" "\n" "그 어댑터로 지역 네트웍을 설정할 것입니다." #: ../../standalone/drakbug:1 #, c-format msgid "Submit cpuinfo" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Minimal install" msgstr "최소 설치" #: ../../lang.pm:1 #, c-format msgid "Ethiopia" msgstr "에티오피아" #: ../../standalone/drakbackup:1 #, c-format msgid "YES" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Enable \"crontab\" and \"at\" for users" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Devanagari" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Total size: %d / %d MB" msgstr "전체 크기: %d / %d MB" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "disabled" msgstr "해제" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Search for new scanners" msgstr "유효한 프린터들" #: ../../standalone/drakgw:1 #, c-format msgid "Disabling servers..." msgstr "서버 중지 중..." #: ../../standalone/drakboot:1 #, c-format msgid "Installation of %s failed. The following error occured:" msgstr "%s 설치 실패. 다음과 같은 오류가 발생했습니다:" #: ../../standalone/drakboot:1 #, c-format msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "" #: ../../install_any.pm:1 #, fuzzy, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "다음과 같은 서버들이 선택되었습니다: %s\n" "\n" "\n" "이 서버들은 기본적으로 활성화됩니다. 비록 아직까지 알려진 보안 문제는 없지" "만,\n" "새로운 문제점이 발견될 수도 있습니다. 그럴 경우에는 가능한 한 신속하게\n" "업그레이드해야 합니다.\n" "\n" "\n" "정말로 이 서버들을 설치합니까?\n" #: ../../printer/main.pm:1 #, c-format msgid "Network printer (TCP/Socket)" msgstr "네트웍 프린터 (TCP/소켓)" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup User files..." msgstr "사요자 파일 백업..." #: ../../steps.pm:1 #, c-format msgid "Install system" msgstr "시스템 설치" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "First DNS Server (optional)" msgstr "첫번째 DNS 서버 (옵션)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Alternatively, you can specify a device name/file name in the input line" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" "is greater than 3 in /etc/security/msec/security.conf, creates the\n" "symlink /etc/security/msec/server to point to\n" "/etc/security/msec/server..\n" "\n" "The /etc/security/msec/server is used by chkconfig --add to decide to\n" "add a service if it is present in the file during the installation of\n" "packages." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Russian (Phonetic)" msgstr "러시아 (음성학)" #: ../../standalone/drakTermServ:1 #, c-format msgid "dhcpd Config..." msgstr "DHCPD 설정 중..." #: ../../standalone/drakgw:1 #, c-format msgid "The setup has already been done, but it's currently disabled." msgstr "설정은 이미 완료되었지만, 현재 해제된 상태입니다." #: ../../any.pm:1 #, c-format msgid "LILO/grub Installation" msgstr "LILO/GRUB 설치" #: ../../keyboard.pm:1 #, c-format msgid "Israeli" msgstr "이스라엘" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "프린터「%s」상에서 인쇄 중" #: ../../standalone/drakTermServ:1 #, c-format msgid "Floppy can be removed now" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "Truly minimal install" msgstr "최소 설치" #: ../../lang.pm:1 #, c-format msgid "Denmark" msgstr "덴마크" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving partition..." msgstr "파티션 이동 중..." #: ../../standalone/drakgw:1 #, c-format msgid "(This) DHCP Server IP" msgstr "DHCP 서버 IP" #: ../../Xconfig/test.pm:1 #, c-format msgid "Test of the configuration" msgstr "설정 테스트" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing %s ..." msgstr "팩키지 설치 중..." #: ../../help.pm:1 #, c-format msgid "" "If you told the installer that you wanted to individually select packages,\n" "it will present a tree containing all packages classified by groups and\n" "subgroups. While browsing the tree, you can select entire groups,\n" "subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right to let you know the purpose of the package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you will be asked to confirm that you really want those servers to be\n" "installed. By default Mandrake Linux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that that\n" "security holes were discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"%s\". Clicking \"%s\" will\n" "install the listed services and they will be started automatically by\n" "default during boot. !!\n" "\n" "The \"%s\" option is used to disable the warning dialog which appears\n" "whenever the installer automatically selects a package to resolve a\n" "dependency issue. Some packages have relationships between each other such\n" "that installation of a package requires that some other program is also\n" "rerquired to be installed. The installer can determine which packages are\n" "required to satisfy a dependency to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert a floppy disk previously created at the\n" "end of another installation. See the second tip of last step on how to\n" "create such a floppy." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose your filesystem encryption key" msgstr "파일 시스템 암호화 키 선택" #: ../../lang.pm:1 #, c-format msgid "Sierra Leone" msgstr "시에라리온" #: ../../lang.pm:1 #, c-format msgid "Botswana" msgstr "보츠와나" #: ../../lang.pm:1 #, c-format msgid "Andorra" msgstr "안도라" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "(default value: %s)" msgstr " (기본값)" #: ../../security/help.pm:1 #, c-format msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Alternative test page (Letter)" msgstr "다른 시험 페이지 (Letter)" #: ../../standalone/drakgw:1 #, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you don't know the meaning of an option, simply leave it as it is.\n" "\n" msgstr "" #: ../../Xconfig/card.pm:1 #, fuzzy, c-format msgid "Choose an X server" msgstr "X 서버 선택" #: ../../install_interactive.pm:1 #, c-format msgid "Swap partition size in MB: " msgstr "스왑 파티션 크기(MB): " #: ../../standalone/drakbackup:1 #, c-format msgid "No changes to backup!" msgstr "백업할 변경사항이 없습니다!" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Formatted\n" msgstr "포맷되었음\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Type of install" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "삼바/윈도우즈 95/98/NT상의 프린터" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated numbers" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "rusers 프로토콜은 네트웍상의 사용자들이 다른 컴퓨터상에 로그인한 \n" "사용자들의 신원을 알 수 있게 합니다." #: ../../standalone/drakautoinst:1 #, c-format msgid "Automatic Steps Configuration" msgstr "자동 과정 설정기" #: ../../lang.pm:1 #, c-format msgid "Barbados" msgstr "바르바도스" #: ../../share/advertising/02-community.pl:1 #, c-format msgid "" "Want to know more and to contribute to the Open Source community? Get " "involved in the Free Software world!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select data to backup..." msgstr "백업할 데이터를 선택하세요..." #: ../../standalone/net_monitor:1 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandrake Control Center." msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "received" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Enable su only from the wheel group members or for any user" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_New" msgstr "/파일(F)/새로 만들기(_N)" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "The DNS Server IP" msgstr "DHCP 서버 IP" #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range End:" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "High" msgstr "높음" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Add a new printer to the system" msgstr "그룹 추가" #: ../../any.pm:1 #, c-format msgid "NoVideo" msgstr "비디오 없음" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "this field describes the device" msgstr "이 필드는 장치를 설명합니다." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Adding printer to Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Local Printers" msgstr "로컬 프린터" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Installation image directory" msgstr "Xpmac (설치 표시 드라이버)" #: ../../any.pm:1 #, c-format msgid "NIS Server" msgstr "NIS 서버" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Port: %s" msgstr "포트" #: ../../lang.pm:1 #, c-format msgid "Spain" msgstr "스페인" #: ../../standalone/drakTermServ:1 #, c-format msgid "local config: %s" msgstr "" #: ../../any.pm:1 #, c-format msgid "This user name has already been added" msgstr "이 사용자명은 이미 추가되어 있습니다." #: ../../interactive.pm:1 #, c-format msgid "Choose a file" msgstr "파일 선택" #: ../../standalone/drakconnect:1 #, c-format msgid "Apply" msgstr "적용" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Auto-detect available ports" msgstr "자동 검색됨" #: ../../lang.pm:1 #, c-format msgid "San Marino" msgstr "산마리노" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently disabled" msgstr "현재 인터넷 연결 공유가 불가능한 상태입니다." #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "Belgium" msgstr "벨기에" #: ../../lang.pm:1 #, c-format msgid "Kuwait" msgstr "쿠웨이트" #: ../../any.pm:1 #, c-format msgid "Choose the window manager to run:" msgstr "사용할 윈도우 매니저를 선택하세요:" #: ../../standalone/drakbackup:1 #, c-format msgid "December" msgstr "십이월" #: ../../standalone/harddrake2:1 #, c-format msgid "sub generation of the cpu" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "First Time Wizard" msgstr "첫 실행 마법사" #: ../../install_steps.pm:1 #, c-format msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "오류가 발생했습니다. 그러나 적절히 처리할 수 없습니다.\n" "위헝을 감수할려면 계속하세요." #: ../../lang.pm:1 #, fuzzy, c-format msgid "Taiwan" msgstr "태국" #: ../../lang.pm:1 #, c-format msgid "Pakistan" msgstr "파키스탄" #: ../../standalone/logdrake:1 #, c-format msgid "please wait, parsing file: %s" msgstr "기다려 주세요. 파일 분석 중: %s" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "Importance: " msgstr "중요성: %s\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Permissions" msgstr "허가권" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider name (ex provider.net)" msgstr "공급자 이름 (예 provider.net)" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "시스템의 자원이 부족합니다. 리눅스 맨드레이크를 설치하는데 일부 문제가 발생" "할\n" "수도 있습니다. 만약 문제가 발생하면, 택스트 모드로 설치를 시도해 보세요.\n" "텍스트 모드로 설치하려면, CDROM으로 부팅후 「F1」을 누르고 「text」라고 입력" "하세요." #: ../../install_interactive.pm:1 #, c-format msgid "Use the Windows partition for loopback" msgstr "윈도우즈 파티션을 루프백으로 사용" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (typewriter)" msgstr "미국 (타자기)" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Connection type: " msgstr "연결 유형: " #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Graphical interface" msgstr "시작시 바로 X 실행" #: ../../lang.pm:1 #, c-format msgid "Chad" msgstr "챠드" #: ../../lang.pm:1 #, c-format msgid "India" msgstr "인도" #: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "XFree %s를 사용한 3D 하드웨어 가속" #: ../../lang.pm:1 #, c-format msgid "Slovakia" msgstr "슬로바키아" #: ../../lang.pm:1 #, c-format msgid "Singapore" msgstr "싱가포르" #: ../../lang.pm:1 #, c-format msgid "Cambodia" msgstr "캄보디아" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "모니터 수평주파수: %s\n" #: ../../standalone/drakperm:1 #, c-format msgid "Path" msgstr "경로" #: ../../standalone/drakbug:1 #, c-format msgid "NOT FOUND" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here you can specify any arbitrary command line into which the job should be " "piped instead of being sent directly to a printer." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" "인쇄 시스템(%s)는 컴퓨터가 부팅할 때 자동으로 실행되지\n" "않을 것입니다.\n" "\n" "인쇄 시스템은 크래커들의 잠재적인 공격목표이기 때문에,\n" "보안 수준을 높게 하였을 시에는 자동실행 기능이 해제될\n" "수도 있도록 되어 있습니다.\n" "\n" "다시 인쇄 시스템의 자동실행 기능이 활성화되도록\n" "하시겠습니까?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "Printer %s\n" "What do you want to modify on this printer?" msgstr "" "프린터 %s: %s: %s\n" "이 프린터에 대해서 무엇을 수정하시겠습니까?" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Add host" msgstr "사용자 추가" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" "플로피에 팩키지 선택목록을 적재 또는 저장할지를 선택하세요.\n" "형식(포맷)은 자동설치 생성 플로피와 동일합니다." #: ../../standalone/drakxtv:1 #, c-format msgid "China (broadcast)" msgstr "중국 (공중파)" #: ../../standalone/drakbackup:1 #, c-format msgid "Use quota for backup files." msgstr "백업 파일에 쿼터 사용" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuring printer \"%s\"..." msgstr "프린터 「%s」 설정 중 ..." #: ../../fs.pm:1 #, c-format msgid "" "Do not allow execution of any binaries on the mounted\n" "file system. This option might be useful for a server that has file systems\n" "containing binaries for architectures other than its own." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Internet connection" msgstr "인터넷 연결" #: ../../modules/interactive.pm:1 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "%s 모듈을 읽어들이는데 실패했습니다.\n" "다른 값으로 다시 시도해 보시겠습니까?" #: ../../share/advertising/01-thanks.pl:1 #, c-format msgid "Welcome to the Open Source world." msgstr "공개 소스 세계에 오신 것을 환영합니다." #: ../../lang.pm:1 #, c-format msgid "Bosnia and Herzegovina" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "이 마운트 위치에는 트루 파일시스템 (ext2, reiserfs, xfs, jfs)이 필요합니다.\n" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "You must enter a host name or an IP address.\n" msgstr "호스트 이름 또는 IP를 입력하세요." #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "Netherlands" msgstr "네덜란드" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Sending files by FTP" msgstr "파일 전송 중 ..." #: ../../network/isdn.pm:1 #, c-format msgid "Internal ISDN card" msgstr "내장 ISDN 카드" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" #: ../../network/modem.pm:1 #, fuzzy, c-format msgid "Title" msgstr "테이블" #: ../../standalone/drakfont:1 #, c-format msgid "Install & convert Fonts" msgstr "폰트 설치 및 변환" #: ../../standalone/drakbackup:1 #, c-format msgid "WARNING" msgstr "경고" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Installing bootloader" msgstr "부트로더 설치 중" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "replay" msgstr "재시도" #: ../../network/netconnect.pm:1 #, c-format msgid "detected %s" msgstr "%s 발견" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Expect is an extension to the Tcl scripting language that allows interactive " "sessions without user intervention." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (U.S.)" msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "Bad backup file" msgstr "잘못된 백업 파일" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "인터넷 연결공유 설정은 이미 완료되었습니다.\n" "현재 불가능한 상태입니다.\n" "\n" "무슨 작업을 하시겠습니까?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Pipe into command" msgstr "작업을 명령으로 파이프 연결" #: ../../install_interactive.pm:1 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "「상업용」드라이버를 필요로하는 일부 하드웨어가 시스템상에 있습니다.\n" "자세한 정보는 다음을 참조하세요: %s" #: ../../lang.pm:1 #, c-format msgid "Haiti" msgstr "하이티" #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Detecting devices..." msgstr "장치를 검색하고 있습니다..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Custom allows you to specify your own day and time. The other options use " "run-parts in /etc/crontab." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Description of the fields:\n" "\n" msgstr "" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Basic options" msgstr "DrakSec 기본 옵션" #: ../../standalone/harddrake2:1 #, c-format msgid "the name of the CPU" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Accept bogus IPv4 error messages" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Refreshing printer data..." msgstr "프린터 데이터 갱신 중 ..." #: ../../install2.pm:1 #, c-format msgid "You must also format %s" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Be careful: this operation is dangerous." msgstr "주의 : 이 조작은 위험합니다." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Insert a floppy containing package selection" msgstr "팩키지 선택목록 플로피 디스크를 넣으세요." #: ../../diskdrake/dav.pm:1 #, c-format msgid "Server: " msgstr "서버:" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Security Alerts:" msgstr "보안 수준" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Sweden" msgstr "스웨덴" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Expect for SSH" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Poland" msgstr "폴란드" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Other ports" msgstr "기타 포트" #: ../../harddrake/v4l.pm:1 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "SMBus controllers" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection timeout (in sec)" msgstr "연결 시간초과 (초)" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Croatian" msgstr "크로아티아" #: ../../help.pm:1 #, fuzzy, c-format msgid "Use existing partition" msgstr "기존의 파티션 사용" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Unable to contact mirror %s" msgstr "분기할 수 없습니다: %s" #: ../../standalone/logdrake:1 #, c-format msgid "/Help/_About..." msgstr "/도움말(H)/이 프로그램은(_A)..." #: ../../standalone/drakbackup:1 #, c-format msgid "Remove user directories before restore." msgstr "복구하기 전에 사용자 디랙토리들을 제거" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" "원격 프린터를 설정하려 합니다. 그러기 위해서는 네트웍이 동작하고 있어야 하는" "데, 아직 네트웍 설정이 되어 있지 않습니다. 네트웍 설정없이 계속 진행하면, 지" "금 설정하고 있는 프린터를 사용할 수 없습니다. 어떻게 하시겠습니까?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "CUPS printer configuration" msgstr "OKI 윈프린터 설정" #: ../../standalone/drakfont:1 #, c-format msgid "could not find any font in your mounted partitions" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "F00f bug" msgstr "" #: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s" msgstr "XFree %s" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Domain Name:" msgstr "도메인 이름" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Root umask" msgstr "암호 없음" #: ../../any.pm:1 #, fuzzy, c-format msgid "On Floppy" msgstr "부트 플로피" #: ../../security/l10n.pm:1 #, c-format msgid "Reboot by the console user" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore" msgstr "복구" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking for available packages..." msgstr "유효한 팩키지를 찾고 있습니다." #: ../../any.pm:1 #, c-format msgid "Init Message" msgstr "초기화 메시지" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Rescue partition table" msgstr "파티션 테이블 응급처치" #: ../../lang.pm:1 #, c-format msgid "Cyprus" msgstr "사이프러스" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connection complete." msgstr "연결 속도" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove from RAID" msgstr "RAID로부터 제거" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "이 암호화 키는 너무 단순합니다.( 적어도 %d 글자는 넘어야 합니다)" #: ../../standalone/drakbug:1 #, c-format msgid "Configuration Wizards" msgstr "설정 마법사" #: ../../network/netconnect.pm:1 #, c-format msgid "ISDN connection" msgstr "ISDN 연결" #: ../../standalone/drakbackup:1 #, c-format msgid "CD-R / DVD-R" msgstr "CDROM / DVDROM" #: ../../standalone/harddrake2:1 #, c-format msgid "primary" msgstr "주" #: ../../printer/main.pm:1 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "This dialog is used to choose which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all the services available on the current installation.\n" "Review each one carefully and uncheck those which are not needed at boot\n" "time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you are not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services that you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" "이제 부팅시에 어떤 서비스를 자동으로 시작하게 할지를 선택해야 합니다.\n" "\n" "현재 설치된 모든 서비스들이 여기에서 보여지고 있습니다.\n" "신중하게 검토해서 부팅시에 항상 필요로하는 것이 아니라면 선택을 해제하세요.\n" "\n" "마우스를 서비스 이름들 위로 올리면, 각 서비스에 대한 간단한 설명을 보여 줄 것" "입니다.\n" "만약 어떤 서비스가 필요한 것인지 아닌지를 잘 모르겠다면,\n" "기본값으로 그냥 두는 것이 안전한 선택입니다.\n" "\n" "이 컴퓨터를 서버용으로 사용하려 한다면, 이 단계에서 매우 주의해야 합니다.\n" "필요하지 않은 서비스가 시작되는 것은 바람직하지 않습니다. 일부 서비스는 \n" "서버상에서 실핸된다면 위험할 수도 있다는 것을 명심하세요. 원칙적으로 \n" "꼭 필요한 서비스들만 선택하세요." #: ../../lang.pm:1 #, c-format msgid "Niue" msgstr "" #: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Skip" msgstr "건너뛰기" #: ../../services.pm:1 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "부팅시에 시작하도록 설정된 모든 네트웍 인테페이스를 \n" "활성화/비활성화 합니다." #: ../../standalone/harddrake2:1 #, c-format msgid "" "the CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Mandrake Linux Printer Management Tool" msgstr "리눅스-맨드레이크 설치 %s" #: ../../pkgs.pm:1 #, c-format msgid "important" msgstr "중요한 팩키지" #: ../../standalone/drakbackup:1 #, c-format msgid "Total Progress" msgstr "전체 진행" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, you'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" "드레이크X가 시스템상에 있는 모든 하드 디스크를 검색하고\n" "또한 PCI SCSI 어댑터 탐지를 시도할 것입니다.\n" "만약 드레이크X가 장치를 발견하게 되면 자동으로\n" "올바른 드라이버를 설치할 것입니다.\n" "\n" "드레이크X의 장치 검색이 실패하더라도, 님께 SCSI 장치의 유무를 질문하게 됩니" "다.\n" "목록에서 장치를 직접 선택하려면 「예」를, SCSI 장치가 없다면 「아니오」를 선" "택하세요.\n" "잘 모르겠다면, 「하드웨어 정보 보기」를 선택한 후 「확인」을 눌러서\n" "시스템상에 존재하는 하드웨어들을 살펴볼 수도 있습니다.\n" "하드웨어에 대한 검토가 끝나면 다시 「확인」버튼을 눌러서 SCSI 인터페이스 질" "문 화면\n" "으로 돌아 올 수 있습니다.\n" "\n" "직접 어댑터를 지정해야 할 때에는, 드레이크X가 옵션을 지정할 것인지를 물어\n" "볼 것입니다. 이 때는 드레이크X가 필요한 옵션을 탐지하도록 하는 것이 좋습니" "다.\n" "일반적으로 이 방법은 잘 작동합니다.\n" "\n" "\n" "만약 그렇지 않다면, 직접 드라이버 옵션을 지정해야 합니다. 사용자 설명서(3" "장, \n" "「하드웨어에 대한 종합정보」색션)를 참조하여, 하드웨어 설명서, \n" "(인터넷에 연결할 수 있다면) 제조업체 웹 사이트, \n" "또는 (윈도우즈가 설치되어 있다면) MS 윈도우즈에서 어떻게 여기에 필요한 \n" "정보를 알아 낼 수 있는지 찾아 보세요." #: ../../lang.pm:1 #, c-format msgid "Aruba" msgstr "아루바" #: ../../standalone/drakbackup:1 #, c-format msgid "Users" msgstr "사용자들" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing bootloader..." msgstr "부트 로더 준비중" #: ../../network/network.pm:1 #, c-format msgid "Gateway (e.g. %s)" msgstr "rpdlxmdnpdl (예. %s)" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "The passwords do not match" msgstr "암호가 일치하지 않습니다." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Examples for correct IPs:\n" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please choose the media for backup." msgstr "" "백업용 매체를\n" "선택하세요." #: ../../standalone/harddrake2:1 #, c-format msgid "Frequency (MHz)" msgstr "" #: ../../install_any.pm:1 #, c-format msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" "이 저장된 팩키지 선택목록을 사용할려면, ``linux defcfg=floppy''라고 입력하여 " "설치을 시작하세요." #: ../../standalone/harddrake2:1 #, c-format msgid "the number of the processor" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Hardware clock set to GMT" msgstr "하드웨어 시계 GMT 설정" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "Do you want to start a new configuration ?" msgstr "이 설정을 테스트해 보시겠습니까?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Give a file name" msgstr "파일 이름을 입력하세요." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Please choose the port that your printer is connected to." msgstr "프린터가 연결된 포트를 선택하세요." #: ../../standalone/livedrake:1 #, c-format msgid "Change Cd-Rom" msgstr "CDROM 바꾸기" #: ../../lang.pm:1 #, c-format msgid "Paraguay" msgstr "파라과이" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Configuration is complete, do you want to apply settings ?" msgstr "어느 XFree 설정을 선택하시겠습니까?" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain /etc/dhcpd.conf:\n" " \tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP \n" " \taddress and net boot images to the machine. drakTermServ helps " "create/remove \n" " \tthese entries.\n" "\t\t\t\n" " \t(PCI cards may omit the image - etherboot will request the correct " "image. \n" "\t\t\tYou should also consider that when etherboot looks for the images, it " "expects \n" "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \tA typical dhcpd.conf stanza to support a diskless client looks " "like:" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "force" msgstr "강제 추진" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Exit" msgstr "종료" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "설정된 인터페이스가 없습니다.\n" "「설정」을 눌러 인터페이스를 먼저 설정하세요." #: ../../keyboard.pm:1 #, c-format msgid "Estonian" msgstr "에스토니아" #: ../../services.pm:1 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" "아파치(Apache)는 웹 서버입니다. 이것은 HTML이나 CGI 파일 서비스를\n" "하는데 사용됩니다." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Enter your CD Writer device name\n" " ex: 0,1,0" msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "ALL" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add/Del Clients" msgstr "클라이언트 추가/제거" #: ../../network/ethernet.pm:1 ../../standalone/drakgw:1 #: ../../standalone/drakpxe:1 #, c-format msgid "Choose the network interface" msgstr "네트웍 인터페이스를 선택하세요." #: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Unknown Model" msgstr "알 수 없는 모델" #: ../../harddrake/data.pm:1 #, c-format msgid "CD/DVD burners" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "기본적으로 부팅되는 파티션\n" " (lilo를 위한것이 아니라 MS-DOS boot를 위한것임)\n" #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to read the file" msgstr "" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "choose image" msgstr "이미지 파일 선택" #: ../../network/shorewall.pm:1 #, c-format msgid "Firewalling configuration detected!" msgstr "방화벽 설정이 감지되었습니다!" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection name" msgstr "연결 이름" #: ../../standalone/draksplash:1 #, c-format msgid "" "x coordinate of text box\n" "in number of characters" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "" "You may not be able to install lilo (since lilo doesn't handle a LV on " "multiple PVs)" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Updating package selection" msgstr "선택된 팩키지 목록 업데이트 중" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "%s파일을 어디에 루프백으로 마운트 하시겠습니까?" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" "플로피가 성공적으로 생성되었습니다.\n" "이젠 설치과정를 반복할 수 있습니다." #: ../../standalone/drakbackup:1 #, c-format msgid "Use CD-R/DVD-R to backup" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "the number of buttons the mouse has" msgstr "버튼 수" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Replay" msgstr "재시도" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup other files" msgstr "다른 파일 백업" #: ../../install_steps.pm:1 #, c-format msgid "No floppy drive available" msgstr "플로피 드라이브를 사용할 수 없습니다." #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files are corrupted" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "TV norm:" msgstr "TV 놈 :" #: ../../standalone/harddrake2:1 #, c-format msgid "Cpuid family" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "32 MB" msgstr "32 MB" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "type: thin" msgstr "유형: " #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (new)" msgstr "리투아니아 AZERTY (신형)" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "소프트웨어 RAID 파티션을 루트(/)로 지정했습니다.\n" "어떠한 부트로더도 /boot 파티션 없이는 이것을 처리하지 못합니다.\n" "그러므로 /boot 파티션을 추가하는 것을 잊지 마세요." #: ../../any.pm:1 #, c-format msgid "Other OS (MacOS...)" msgstr "기타 OS (MacOS...)" #: ../../mouse.pm:1 #, c-format msgid "To activate the mouse," msgstr "마우스를 활성화하려면" #: ../../install_interactive.pm:1 #, c-format msgid "Bringing up the network" msgstr "네트웍 활성화 중..." #: ../../common.pm:1 #, c-format msgid "Screenshots will be available after install in %s" msgstr "스크린샷은 설치후에 %s에 있습니다." #: ../../help.pm:1 #, fuzzy, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose which one you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "둘 이상의 MS 윈도우즈 파티션이 디스크상에서 발견되었습니다.\n" "맨드레이크 리눅스 운영체제를 설치하기 위해 크기를 조정할\n" "파티션을 선택하세요.\n" "\n" "각 파티션은 다음과 같이 열거됩니다: 「리눅스 이름」,「윈도우즈 이름」,\n" "「용량」.\n" "\n" "「리눅스 이름」영역의 구조: 「하드디스크 유형」,「하드디스크 번호」,\n" "「파티션 번호」(가령, 「hda1」).\n" "\n" "「하드디스크 유형」은, IDE 디스크일 경우에는 「hd」이며,\n" "SCSI 디스크일 경우에는 「sd」입니다.\n" "\n" "「하드디스크 번호」는 항상 「hd」또는 「sd」뒤에 오는 문자입니다.\n" "IDE 하드디스크의 경우:\n" "\n" " ○ 「a」는 「주 IDE 제어기상의 주 디스크」를 의미합니다.\n" "\n" " ○ 「b」는 「주 IDE 제어기상의 보조 디스크」를 의미합니다.\n" "\n" " ○ 「c」는 「보조 IDE 제어기상의 주 디스크」를 의미합니다.\n" "\n" " ○ 「d」는 「보조 IDE 제어기상의 보조 디스크」를 의미합니다.\n" "\n" "SCSI 하드디스크의 경우, 「a」는 「최소 SCSI ID」, 「b」는 「다음 최소 SCSI " "ID」\n" "와 같은 식으로 의미를 가집니다.\n" "「윈도우즈 이름」은 MS 윈도우즈하에서의 이름입니다.\n" "(가령, 첫 번째 디스크 또는 파티션은 「C:」입니다.)" #: ../../lang.pm:1 #, c-format msgid "Tanzania" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Computing FAT filesystem bounds" msgstr "도스 파일시스템의 범위 계산중" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Backup Sources: \n" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "custom" msgstr "사용자 정의" #: ../../standalone/logdrake:1 #, c-format msgid "Content of the file" msgstr "파일 내용" #: ../../any.pm:1 #, c-format msgid "Authentication LDAP" msgstr "인증 LDAP" #: ../../harddrake/sound.pm:1 #, c-format msgid "Let me pick any driver" msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Profile " msgstr "프로파일: " #: ../../standalone/net_monitor:1 #, c-format msgid "transmitted" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Palestine" msgstr "경로 선택" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "RAID md%s\n" msgstr "레이드 장치 %s\n" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated strings" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid " isdn" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Here is the full list of keyboards available" msgstr "지원되는 키보드 목록이 여기에 있습니다." #: ../../standalone/draksplash:1 #, c-format msgid "Theme name" msgstr "테마 이름" #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "/_Help" msgstr "/도움말(_H)" #: ../../harddrake/sound.pm:1 #, c-format msgid "Choosing an arbitrary driver" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Cook Islands" msgstr "쿡 제도" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "the width of the progress bar" msgstr "" #: ../../fs.pm:1 #, c-format msgid "Formatting partition %s" msgstr "%s 파티션 포맷중" #: ../../standalone/drakbackup:1 #, c-format msgid "Hostname required" msgstr "호스트명이 필요합니다." #: ../../standalone/drakfont:1 #, c-format msgid "Unselect fonts installed" msgstr "설치된 폰트 선택 해제" #: ../../mouse.pm:1 #, c-format msgid "Wheel" msgstr "휠 마우스" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Submit kernel version" msgstr "커널 버전" #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/gtk.pm:1 #: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 #: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 #: ../../standalone/drakgw:1 ../../standalone/drakperm:1 #: ../../standalone/draksec:1 ../../standalone/logdrake:1 #: ../../standalone/mousedrake:1 ../../standalone/net_monitor:1 #, c-format msgid "Cancel" msgstr "취소" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Searching for configured scanners ..." msgstr "유효한 프린터들" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Videocard" msgstr "비디오 모드" #: ../../standalone/drakbackup:1 #, c-format msgid "\tBackups use tar and bzip2\n" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "Remove Selected" msgstr "선택 항목 제거" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/Autodetect _modems" msgstr "자동 검색됨" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove printer" msgstr "프린터 제거" #: ../../standalone/drakbackup:1 #, c-format msgid "View Last Log" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Connection Type" msgstr "접속 유형:" #: ../../standalone/logdrake:1 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" "메일 설정 도구에 잘 오셨습니다.\n" "\n" "여기서 경고 시스템을 설정할 수 있습니다.\n" #: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakperm:1 #, c-format msgid "Other" msgstr "기타" #: ../../any.pm:1 ../../harddrake/v4l.pm:1 ../../standalone/drakfloppy:1 #, c-format msgid "Default" msgstr "기본값" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 2 Emulation" msgstr "버튼 2 에뮬레이션" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Please enter a package name." msgstr "사용자명을 입력해 주세요" #: ../../security/l10n.pm:1 #, c-format msgid "Run chkrootkit checks" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "type1inst building" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Abiword" msgstr "아비워드" #: ../../standalone/draksplash:1 #, c-format msgid "choose image file" msgstr "이미지 파일 선택" #: ../../Xconfig/card.pm:1 #, c-format msgid "X server" msgstr "X 서버" #: ../../any.pm:1 #, c-format msgid "Domain Admin User Name" msgstr "도메인 관리자 사용자명" #: ../../standalone/drakxtv:1 #, c-format msgid "There was an error while scanning for TV channels" msgstr "TV 채널을 찾는 과정에서 오류가 있었습니다." #: ../../keyboard.pm:1 #, c-format msgid "US keyboard (international)" msgstr "US 키보드 (국제)" #: ../../standalone/drakbug:1 #, c-format msgid "Not installed" msgstr "설치되지 않았습니다." #: ../../keyboard.pm:1 #, c-format msgid "Both Alt keys simultaneously" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "LAN connection" msgstr "LAN 연결" #: ../../standalone/logdrake:1 #, c-format msgid "/File/-" msgstr "/파일(F)/-" #: ../../keyboard.pm:1 #, c-format msgid "Italian" msgstr "이탈리아" #: ../../interactive.pm:1 #, c-format msgid "Basic" msgstr "기본" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" " Copyright (C) 2002 by MandrakeSoft \n" "\tStew Benedict sbenedict\\@mandrakesoft.com\n" "\n" msgstr "" #: ../../install_messages.pm:1 #, fuzzy, c-format msgid "http://www.mandrakelinux.com/en/92errata.php3" msgstr "http://www.mandrakelinux.com/en/90errata.php3" #: ../../lang.pm:1 #, c-format msgid "Honduras" msgstr "혼두라스" #: ../../help.pm:1 #, c-format msgid "pdq" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO" msgstr "카드 IO" #: ../../standalone/drakperm:1 #, c-format msgid "when checked, owner and group won't be changed" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "이 특별한 부트스트랩\n" "파티션은 시스템을 \n" "듀얼 부팅하기 위한 것입니다.\n" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "각 과정에 대하여 수동설치와 자동반복설치를 선택하세요." #: ../../standalone/scannerdrake:1 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by FTP.\n" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Reports check result to tty" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "You must enter a device or file name!" msgstr "장치 또는 파일 이름을 입력해야 합니다!" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "/_Quit" msgstr "/종료(_Q)" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphics memory: %s kB\n" msgstr "비디오 메모리: %s kB\n" #: ../../standalone.pm:1 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to compilation tools" msgstr "컴파일 도구 액세스" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select data to restore..." msgstr "복구할 데이터를 선택하세요..." #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "만약 aboot를 사용할 계획이라면, 디스크의 시작부분에 충분한 공간 (2048 섹터 " "면 충분함)\n" "을 남기도록 주의하세요." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Standard test page" msgstr "표준 시험 페이지" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Create" msgstr "생성" #: ../../standalone/drakbackup:1 #, c-format msgid "What" msgstr "대상" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error ordering packages:" msgstr "팩키지를 정렬하는 중 오류발생:" #: ../../keyboard.pm:1 #, c-format msgid "Bulgarian (BDS)" msgstr "불가리아 (BDS)" #: ../../standalone/drakTermServ:1 #, c-format msgid "Disable Server" msgstr "서버 사용 해제" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Filesystem encryption key" msgstr "파일시스템 암호화 키" #: ../../keyboard.pm:1 #, c-format msgid "Gujarati" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " While you can use a pool of IP addresses, rather than setup a " "specific entry for\n" " a client machine, using a fixed address scheme facilitates using the " "functionality\n" " of client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" " Note: The '#type' entry is only used by drakTermServ. Clients can " "either be 'thin'\n" " or 'fat'. Thin clients run most software on the server via xdmcp, " "while fat clients run \n" " most software on the client machine. A special inittab, %s is\n" " written for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are \n" " modified if thin clients are used, to enable xdmcp. Since there are " "security issues in \n" " using xdmcp, hosts.deny and hosts.allow are modified to limit access " "to the local\n" " subnet.\n" "\t\t\t\n" " Note: The '#hdw_config' entry is also only used by drakTermServ. " "Clients can either \n" " be 'true' or 'false'. 'true' enables root login at the client " "machine and allows local \n" " hardware configuration of sound, mouse, and X, using the 'drak' " "tools. This is enabled \n" " by creating separate config files associated with the client's IP " "address and creating \n" " read/write mount points to allow the client to alter the file. Once " "you are satisfied \n" " with the configuration, you can remove root login privileges from " "the client.\n" "\t\t\t\n" " Note: You must stop/start the server after adding or changing " "clients." msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Save theme" msgstr "테마 저장" #: ../../lang.pm:1 #, c-format msgid "Brazil" msgstr "브라질" #: ../../standalone/drakautoinst:1 #, c-format msgid "Auto Install" msgstr "자동 설치" #: ../../network/isdn.pm:1 ../../network/netconnect.pm:1 #, c-format msgid "Network Configuration Wizard" msgstr "네트웍 설정 마법사" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Removable media automounting" msgstr "탈착식 미디어 자동 마운트" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Enter the directory to save:" msgstr "저장할 디렉토리를 선택하세요:" #: ../../services.pm:1 #, c-format msgid "Printing" msgstr "인쇄" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "There are no printers found which are directly connected to your machine" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Create a new partition" msgstr "새 파티션 만들기" #: ../../harddrake/sound.pm:1 #, c-format msgid "Driver:" msgstr "드라이버:" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "unknown" msgstr "알 수없는 모델" #: ../../install_interactive.pm:1 #, c-format msgid "Use fdisk" msgstr "fdisk 사용" #: ../../mouse.pm:1 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "마우스휠을 움직여 보세요." #: ../../standalone/net_monitor:1 #, c-format msgid "sent: " msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Automatic IP" msgstr "IP 자동할당" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to use. Just click \"%s\" to reboot the system. The first thing you\n" "should see after your computer has finished doing its hardware tests is the\n" "bootloader menu, giving you the choice of which operating system to start.\n" "\n" "The \"%s\" button shows two more buttons to:\n" "\n" " * \"%s\": to create an installation floppy disk that will automatically\n" "perform a whole installation without the help of an operator, similar to\n" "the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"%s\". This is a partially automated installation. The partitioning\n" "step is the only interactive procedure.\n" "\n" " * \"%s\". Fully automated installation: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a number of similar machines.\n" "See the Auto install section on our web site for more information.\n" "\n" " * \"%s\"(*): saves a list of the packages selected in this installation.\n" "To use this selection with another installation, insert the floppy and\n" "start the installation. At the prompt, press the [F1] key and type >>linux\n" "defcfg=\"floppy\" <<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" msgstr "" "설치를 완료하였습니다. 님의 GNU/리눅스 시스템은 이제 사용할 준비가\n" "되었습니다. 시스템을 다시 부팅하려면 「확인」을 누르세요.\n" "컴퓨터가 다시 부팅되면, (다중 부팅이 설정되었을 경우에) 님이 선호하는\n" "운영체제를 시작할 수 있습니다.\n" "\n" "「고급」버튼(점문가 모드에만 있음)을 누르면 두 개의 추가 버튼이 나타넙니다:\n" "\n" " ○ 「자동 설치 플로피 생성」: 님이 지금까지 설치한 내용을 관리자의 별다른\n" "도움없이 자동으로 전체 설치를 수행하게 하는\n" "자동 설치 플로피 디스크를 만듭니다.\n" "\n" " 주의: 버튼을 누르면 두 개의 개별적인 옵션이 나타납니다:\n" "\n" " ○ 「재생」: 파티션 나누기 작업만 제외하고, 나머지 과정은 자동설치로\n" "수행하는 자동설치 플로피를 만듭니다.\n" "\n" " ○ 「자동화」: 디스크상의 모든 데이터를 삭제하고 모든 파티션이 다시\n" "만들어지는 완벽한 자동 설치를 수행하는 플로피를 만듭니다.\n" "\n" " 이 기능을 사용하면, 많은 수의 비슷한 컴퓨터에 설치작업을 할 때 편리합니" "다.\n" " 자세한 정보는 저희 윕사이트의 자동설치관련 부분을 참조하세요.\n" "\n" " ○ 「팩키지 선택사항 저장」(*): 앞 단계에서 선택한 팩키지 목록을 저장합니" "다.\n" "또 다른 설치를 수행할 때, 플로피를 드라이브에 넣고, [F1]키를 눌러서\n" "설치 화면이 도움말 화면으로 들어가게 한후, 「linux defcfg=\"floppy\"」라고\n" "입력하세요.\n" "\n" "(*) 님은 FAT으로 포맷된 플로피 하나를 가지고 있어야 합니다.\n" " (리눅스에서 포맷하려면, 「mformat a:」명령을 사용하세요.)" #: ../../lang.pm:1 #, c-format msgid "Moldova" msgstr "몰도바" #: ../../mouse.pm:1 #, c-format msgid "Kensington Thinking Mouse" msgstr "켄싱턴 씽킹 마우스" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuration of a remote printer" msgstr "원격 프린터 설정" #: ../../share/advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "An online platform to respond to enterprise support needs." msgstr "" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "주소는 「http:」로 시작해야 합니다." #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Oriya" msgstr "수리남" #: ../../standalone/drakperm:1 #, c-format msgid "Add a new rule at the end" msgstr "새 규칙 끝에 추가" #: ../../standalone/drakboot:1 #, c-format msgid "LiLo and Bootsplash themes installation successful" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can also decide here whether printers on remote machines should be " "automatically made available on this machine." msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "이제 %s 드라이버에 옵션을 지정할 수 있습니다.\n" "옵션은 ``이름=값 이름2=값2 ...''형식으로 지정합니다..\n" "가령, ``io=0x300 irq=7''" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without writing the partition table?" msgstr "파티션을 기록하지 않고 종료하시겠습니까?" #: ../../mouse.pm:1 #, c-format msgid "Genius NetScroll" msgstr "지니어스 넷스크롤" #: ../../standalone/drakbackup:1 #, c-format msgid "On Hard Drive" msgstr "하드 드라이브" #: ../../standalone.pm:1 #, c-format msgid "Installing packages..." msgstr "팩키지 설치 중..." #: ../../keyboard.pm:1 #, c-format msgid "Dutch" msgstr "네델란드" #: ../../lang.pm:1 #, c-format msgid "Angola" msgstr "앙골라" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "The following packages need to be installed:\n" msgstr "다음 팩키지들이 설치될 것입니다." #: ../../standalone/logdrake:1 #, c-format msgid "service setting" msgstr "서비스 설정" #: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Custom" msgstr "사용자 정의" #: ../../lang.pm:1 #, c-format msgid "Latvia" msgstr "라트비아" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "File is already used by another loopback, choose another one" msgstr "다른 루프백이 이 파일을 사용하고 있습니다, 다른 것을 선택해 주세요." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Read-only" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Enable/Disable name resolution spoofing protection. If\n" "\"alert\" is true, also reports to syslog." msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "No known driver" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "1 MB" msgstr "1 MB" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "If it is not the one you want to configure, enter a device name/file name in " "the input line" msgstr "" #: ../../standalone/draksound:1 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Configure Local Area Network..." msgstr "지역 네트웍 설정..." #: ../../security/l10n.pm:1 #, c-format msgid "Verify checksum of the suid/sgid files" msgstr "" #: ../../services.pm:1 #, c-format msgid "Launch the sound system on your machine" msgstr "이 컴퓨터에서 사운드 시스템 실행" #: ../../security/l10n.pm:1 #, c-format msgid "Run some checks against the rpm database" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Execute" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Preparing printer database..." msgstr "프린터 데이터베이스 준비 중 ..." #: ../../standalone/harddrake2:1 #, c-format msgid "Information" msgstr "정보" #: ../../network/drakfirewall.pm:1 #, c-format msgid "No network card" msgstr "네트웍 카드 없음" #: ../../mouse.pm:1 #, c-format msgid "3 buttons" msgstr "3 버튼" #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #, c-format msgid "Which filesystem do you want?" msgstr "어떤 파일 시스템을 원하세요?" #: ../../lang.pm:1 #, c-format msgid "Malta" msgstr "마르타" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Detailed information" msgstr "자세한 정보" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" "프린터 기본값 설정\n" "페이지 크기와 (만약 유효하다면) 잉크 유형이 올바른지\n" "잘 확인하세요. 고품질 인쇄물을 얻기위해서는 인쇄 속도가\n" "그 만큼 느려진다는 것을 알고 계세요." #: ../../install_any.pm:1 #, c-format msgid "This floppy is not FAT formatted" msgstr "이 플로피 디스크는 FAT 포맷이 아닙니다." #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Configuring network" msgstr "네트웍 설정" #: ../../standalone/drakbackup:1 #, c-format msgid "" "This option will save files that have changed. Exact behavior depends on " "whether incremental or differential mode is used." msgstr "" #: ../../Xconfig/main.pm:1 #, c-format msgid "Graphic Card" msgstr "그래픽 카드" #: ../../install_interactive.pm:1 #, c-format msgid "Resizing Windows partition" msgstr "윈도우즈 파일 시스템의 범위 계산중" #: ../../lang.pm:1 #, c-format msgid "Cameroon" msgstr "카메룬" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider dns 1 (optional)" msgstr "공급자 DNS 1 (옵션)" #: ../../install_interactive.pm:1 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "이제 %s의 파티션 작업을 할 수 있습니다.\n" "마친 후, 'w'를 눌러 저장하는것을 잊지마세요." #: ../../keyboard.pm:1 #, c-format msgid "Saami (swedish/finnish)" msgstr "" #: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 #: ../../standalone/drakfont:1 ../../standalone/net_monitor:1 #: ../../standalone/printerdrake:1 #, c-format msgid "Close" msgstr "닫기" #: ../../help.pm:1 #, c-format msgid "" "\"%s\": check the current country selection. If you are not in this\n" "country, click on the \"%s\" button and choose another one. If your country\n" "is not in the first list shown, click the \"%s\" button to get the complete\n" "country list." msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Calendar" msgstr "달력" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "원격 LPD 프린터를 사용하기 위해서는\n" "그 프린터 서버의 호스트명과 그 서버상의 프린터 이름을\n" "입력해야 합니다." #: ../../lang.pm:1 #, c-format msgid "Iceland" msgstr "아이스랜드" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Network & Internet Configuration" msgstr "네트웍 환경 설정" #: ../../common.pm:1 #, c-format msgid "consolehelper missing" msgstr "" #: ../../services.pm:1 #, c-format msgid "stopped" msgstr "정지됨" #: ../../standalone/harddrake2:1 #, c-format msgid "Whether the FPU has an irq vector" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Ext2" msgstr "Ext2" #: ../../ugtk2.pm:1 #, c-format msgid "Expand Tree" msgstr "트리 확장" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver'll only be used on next bootstrap." msgstr "" #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Expert Mode" msgstr "전문가 모드" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer options" msgstr "프린터 옵션" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Local Network adress" msgstr "C 클래스 지역 네트웍" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup your System files. (/etc directory)" msgstr "시스템 파일 먼저 백업:" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Set the user umask." msgstr "사용자들" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates ?" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Samba Server" msgstr "삼바 서비스" #: ../../standalone/drakxtv:1 #, c-format msgid "Australian Optus cable TV" msgstr "" #: ../../install_steps_newt.pm:1 #, c-format msgid "" " / between elements | selects | next screen " msgstr "" " / 항목간 이동 | 선택 | 다음 화면" #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet:" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Zimbabwe" msgstr "짐바브웨" #: ../../standalone/drakbackup:1 #, c-format msgid "When" msgstr "시간" #: ../../network/adsl.pm:1 #, c-format msgid "" "You need the Alcatel microcode.\n" "Download it at:\n" "%s\n" "and copy the mgmt.o in /usr/share/speedtouch" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Hour" msgstr "시" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Second DNS Server (optional)" msgstr "두번째 DNS 서버 (옵션)" #: ../../lang.pm:1 #, c-format msgid "Finland" msgstr "핀란드" #: ../../Xconfig/various.pm:1 #, c-format msgid "Color depth: %s\n" msgstr "색상 심도: %s\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It must be upgraded" msgstr "이 팩키지를 선택해제할수 없습니다. 반드시 업그레이드되어야 합니다." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Loading from floppy" msgstr "플로피에서 읽는 중" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable the logging of IPv4 strange packets." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Slovenia" msgstr "슬로베니아" #: ../../standalone/mousedrake:1 #, fuzzy, c-format msgid "Mouse test" msgstr "마우스 시스템" #: ../../standalone/drakperm:1 #, c-format msgid "" "Drakperm is used to see files to use in order to fix permissions, owners, " "and groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "사용자 입력\n" "%s" #: ../../standalone/harddrake2:1 #, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "ProgressBar color selection" msgstr "진행막대 색상 선택" #: ../../any.pm:1 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "몇 가지 항목이 여기에 표시되고 있습니다.\n" "더 추가하거나, 기존의 것들을 수정할수 있습니다." #: ../../help.pm:1 #, c-format msgid "/dev/hda" msgstr "/dev/hda" #: ../../help.pm:1 #, c-format msgid "/dev/hdb" msgstr "/dev/hdb" #: ../../standalone/drakbug:1 #, c-format msgid "" "Application Name\n" "or Full Path:" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "정해준 시간에 한번에 하나씩 실행시킵니다. at는 batch 명령들을 시스템\n" "로드율이 낮을때 수행시킵니다." #: ../../harddrake/v4l.pm:1 #, c-format msgid "Radio support:" msgstr "라디오 지원:" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing SANE packages..." msgstr "팩키지 설치 중..." #: ../../any.pm:1 #, c-format msgid "LDAP" msgstr "LDAP" #: ../../bootloader.pm:1 #, c-format msgid "SILO" msgstr "SILO" #: ../../diskdrake/removable.pm:1 #, c-format msgid "Change type" msgstr "유형 변경" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid ", USB printer #%s" msgstr "" #: ../../any.pm:1 #, c-format msgid "SILO Installation" msgstr "SILO 설치" #: ../../install_messages.pm:1 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandrake " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" "축하합니다. 설치가 성공적으로 끝났습니다.\n" "부트 미디어를 제거하고 리턴을 눌러서 리부팅 하세요.\n" "\n" "\n" "이 버전의 맨드레이크 리눅스의 버그수정 정보는\n" "%s\n" "에서 얻으실 수 있습니다.\n" "\n" "\n" "설치후 시스템 설정에 대한 정보는 공식 맨드레이크 리눅스 유저 가이드를\n" "참고하시기 바랍니다." #: ../../printer/printerdrake.pm:1 #, c-format msgid "paranoid" msgstr "최고" #: ../../security/l10n.pm:1 #, c-format msgid "Do not send mails when unneeded" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Your scanner(s) will not be available on the network." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Send mail report after each backup to:" msgstr "백업 후 보고 메일 보내기:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolution" msgstr "해상도" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" "삼바 프린터로 인쇄하려면, 삼바 서버의 호스트명 \n" "(주의! 그 서버의 TCP/IP 호스트명과는 이름이 다를 수 있습니다.)과, \n" "가능하다면, 그 서버의 IP 주소 그리고 액세스하려는 프린터의 \n" "공유 이름, 정식 사용자명, 암호, 작업그룹명을 \n" "입력해야 합니다." #: ../../security/help.pm:1 #, c-format msgid "" " Enabling su only from members of the wheel group or allow su from any user." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "reconfigure" msgstr "재설정" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "님의 카드는 XFree %s로만 가능한 3D 하드웨어 가속기능이 지원됩니다.\n" "주의: 이것은 실험적인 지원이며 님의 컴퓨터를 멈추게 할 수 있습니다." #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Shell timeout" msgstr "커널 부트 제한시간" #: ../../standalone/logdrake:1 #, c-format msgid "Xinetd Service" msgstr "Xinetd 서비스" #: ../../any.pm:1 #, c-format msgid "access to network tools" msgstr "네트웍 도구 액세스" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Firmware-Upload for HP LaserJet 1000" msgstr "" #: ../../share/advertising/03-software.pl:1 #, c-format msgid "" "And, of course, push multimedia to its limits with the very latest software " "to play videos, audio files and to handle your images or photos." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "aboot 설치 실패. \n" "첫번째 파티션을 훼손할지라도 강제 설치할까요?" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Restore Selected\n" "Files" msgstr "" "선택된 파일\n" "복구" #: ../../standalone/drakbackup:1 #, c-format msgid "" "%s exists, delete?\n" "\n" "Warning: If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Please fill or check the field below" msgstr "아래 양식을 채워 주세요." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "「/etc/fstab」의 변경사항을 저장하시겠습니까?" #: ../../standalone/drakconnect:1 #, c-format msgid "Boot Protocol" msgstr "부트 프로토콜" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "LVM-disks %s\n" msgstr "LVM-디스크 %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "The package %s is needed. Install it?" msgstr "팩키지 %s가 필요합니다. 설치하겠습니까?" #: ../../services.pm:1 #, c-format msgid "On boot" msgstr "자동실행" #: ../../standalone/harddrake2:1 #, c-format msgid "Bus identification" msgstr "버스 아이디" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Vatican" msgstr "라트바아" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please make a backup of your data first" msgstr "먼저 데이터를 백업하세요." #: ../../install_interactive.pm:1 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "" "하드 드라이브가 하나 이상 있습니다. 어느 것에 리눅스를 설치하시겠습니까?" #: ../../lang.pm:1 #, c-format msgid "Eritrea" msgstr "에리트리아" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot ISO" msgstr "부트 ISO" #: ../../network/adsl.pm:1 #, fuzzy, c-format msgid "Firmware needed" msgstr "부팅시 적재 모듈이 있을 경우에만 이미지 생성" #: ../../standalone/drakfont:1 #, c-format msgid "Remove List" msgstr "제거 목록" #: ../../share/advertising/05-desktop.pl:1 #, c-format msgid "A customizable environment" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Inuktitut" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Some protocols, like rsync, may be configured at the server end. Rather " "than using a directory path, you would use the 'module' name for the service " "path." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Morocco" msgstr "모로코" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Which printer model do you have?" msgstr "어떤 프린터를 가지고 있습니까?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add a new printer" msgstr "새 프린터 추가" #: ../../standalone/drakbackup:1 #, c-format msgid " All of your selected data have been " msgstr "" #: ../../lang.pm:1 #, c-format msgid "Nepal" msgstr "네팔" #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Delete" msgstr "<-- 삭제" #: ../../harddrake/data.pm:1 #, c-format msgid "cpu # " msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "chunk size" msgstr "크기" #: ../../security/help.pm:1 #, c-format msgid "" "If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" "If set to NONE, no issues are allowed.\n" "\n" "Else only /etc/issue is allowed." msgstr "" #: ../../security/help.pm:1 #, c-format msgid " Enable/Disable sulogin(8) in single user level." msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "commands before booting, or 'c' for a command-line." msgstr "" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "Problems installing package %s" msgstr "팩키지 설치중 문제 발생 %s" #: ../../standalone/logdrake:1 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Add a scanner manually" msgstr "수동으로 사용자 선택" #: ../../standalone/printerdrake:1 #, c-format msgid "Refresh" msgstr "" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Reload partition table" msgstr "파티션 테이블 다시 읽기" #: ../../standalone/drakboot:1 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "예, 자동로그인을 사용합니다." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Selected" msgstr "" "선택된 파일\n" "복구" #: ../../standalone/drakfont:1 #, c-format msgid "Search for fonts in installed list" msgstr "설치된 목록에서 폰트 검색" #: ../../standalone/drakgw:1 #, c-format msgid "The Local Network did not finish with `.0', bailing out." msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Boot" msgstr "루트" #: ../../standalone/drakbackup:1 #, c-format msgid " and the CD is in the drive" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Tuner type:" msgstr "튜너 유형:" #: ../../help.pm:1 #, c-format msgid "" "Now, it's time to select a printing system for your computer. Other OSs may\n" "offer you one, but Mandrake Linux offers two. Each of the printing system\n" "is best suited to particular types of configuration.\n" "\n" " * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"%s\"\n" "will handle only very simple network cases and is somewhat slow when used\n" "with networks.) It's recommended that you use \"pdq\" if this is your first\n" "experience with GNU/Linux.\n" "\n" " * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n" "printing to your local printer or to one halfway around the planet. It is\n" "simple to configure and can act as a server or a client for the ancient\n" "\"lpd \" printing system, so it compatible with older operating systems\n" "which may still need print services. While quite powerful, the basic setup\n" "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n" "sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n" "front-ends for printing or choosing printer options and for managing the\n" "printer.\n" "\n" "If you make a choice now, and later find that you don't like your printing\n" "system you may change it by running PrinterDrake from the Mandrake Control\n" "Center and clicking the expert button." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "\"Menu\" key" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Find the correct model in the list when a wrong model or " "\"Raw printer\" is highlighted." msgstr "" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Security Administrator:" msgstr "보안 관리자 (로그인 또는 이메일)" #: ../../security/help.pm:1 #, c-format msgid "Set the shell timeout. A value of zero means no timeout." msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Firmware copy succeeded" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have an Internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" "인터넷 연결이 없습니다.\n" "「설정」을 눌러 먼저 연결을 설정하세요." #: ../../standalone/drakfont:1 #, c-format msgid "Fonts copy" msgstr "폰트 복사" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Automated" msgstr "자동" #: ../../Xconfig/test.pm:1 #, c-format msgid "Do you want to test the configuration?" msgstr "이 설정을 테스트해 보시겠습니까?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" "GIMP." msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Save packages selection" msgstr "선택된 팩키지 목록 저장" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "/_Actions" msgstr "동작" #: ../../standalone/drakautoinst:1 #, c-format msgid "Remove the last item" msgstr "마지막 항목 삭제" #: ../../standalone/drakbackup:1 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "No net boot images created!" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "use pptp" msgstr "PPTP 사용" #: ../../services.pm:1 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "어떤 서비스가 부팅시에 자동 실행되어야 할지 선택하세요." #: ../../security/l10n.pm:1 #, c-format msgid "Check files/directories writable by everybody" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Learn how to use this printer" msgstr "이 프린터의 사용법 알아보기" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configure the network now" msgstr "지금 네트웍 설정" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "팩키지를 받을 미러 사이트를 선택해 주세요." #: ../../install_interactive.pm:1 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" "FAT 크기 조정기가 님의 파티션을 처리할 수 없습니다.\n" "다음의 오류가 발생했습니다: %s" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "Size: " msgstr "크기: %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which sector do you want to move it to?" msgstr "어떤 섹터를 이동하고 싶으십니까?" #: ../../lang.pm:1 #, c-format msgid "Bahamas" msgstr "바하마" #: ../../interactive/stdio.pm:1 #, c-format msgid "Do you want to click on this button?" msgstr "이 버튼을 누르시겠습니까?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Manual configuration" msgstr "수동 설정" #: ../../standalone/logdrake:1 #, c-format msgid "search" msgstr "검색" #: ../../services.pm:1 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "이 팩키지는 「/etc/sysconfig/keyboard」에 설정되어 있는 \n" "키보드 맵을 적재합니다. 키보드는 「kbdconfig」명령으로 선택할 수 있습니다.\n" "대부분의 시스템에서 필요한 것입니다." #: ../../Xconfig/card.pm:1 #, c-format msgid "Xpmac (installation display driver)" msgstr "Xpmac (설치 표시 드라이버)" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "" #: ../../security/help.pm:1 #, c-format msgid " Accept/Refuse icmp echo." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "Syslog는 여러 데몬들의 로그 메세지를 여러 종류의 시스템 로그 파일로\n" "남기는데 유용합니다. 항상 Syslog를 실행시키는것이 좋습니다." #: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Unknown/Others" msgstr "알 수 없음|일반" #: ../../standalone/drakxtv:1 #, c-format msgid "No TV Card detected!" msgstr "TV 카드를 찾을 수 없습니다!" #: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Options" msgstr "옵션들" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "「%s」프린터가 기본 프린터로 설정되었습니다." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "generation of the cpu (eg: 8 for PentiumIII, ...)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detected" msgstr "자동 검색됨" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "" "You are about to configure your computer to install a PXE server as a DHCP " "server\n" "and a TFTP server to build an installation server.\n" "With that feature, other computers on your local network will be installable " "using this computer as source.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "이제 인터넷 연결 공유를 위해서 님의 컴퓨터를 설정하려고 합니다.\n" "이로인해, 지역 네트웍의 다른 컴퓨터들도 이 컴퓨터의 인터넷 연결을 사용할 수 " "있게 됩니다.\n" "\n" "주의: 지역 네트웍(랜)을 목적으로 설치된 네트웍 어댑터가 있어야 합니다." #: ../../harddrake/sound.pm:1 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent " "sound API (it's available on most UNIX(tm) systems) but it's a very basic " "and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" "1MB 부트스트랩 공간 부족! 설치는 계속할 수 있지만, 시스템을 부팅하기 위해서" "는 디스크드레이크에서 부트스트랩 파티션을 만들어야 합니다." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer you want to set up or enter a device name/file " "name in the input line" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Refuse" msgstr "거부" #: ../../standalone/draksec:1 #, c-format msgid "LOCAL" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "HFS" msgstr "HFS" #: ../../services.pm:1 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" "하드드레이크는 하드웨어 검색을 수행하며, 필요하다면\n" "새/변경된 하드웨어를 설정합니다." #: ../../fs.pm:1 #, c-format msgid "Creating and formatting file %s" msgstr "%s 파일를 생성하고 포맷" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned " "on. Download the Windows driver package from the HP web site (the firmware " "on the printer's CD does not work) and extract the firmware file from it by " "uncompresing the self-extracting '.exe' file with the 'unzip' utility and " "searching for the 'sihp1000.img' file. Copy this file into the '/etc/" "printer' directory. There it will be found by the automatic uploader script " "and uploaded whenever the printer is connected and turned on.\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose an existing LVM to add to" msgstr "추가할 LVM를 선택하세요" #: ../../standalone/drakfont:1 #, c-format msgid "xfs restart" msgstr "XFS 재시작" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" "프린터 「%s」가 이미 존재합니다.\n" "정말로 기존 설정을 덮어 쓸까요?" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use the scanners on hosts: " msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Unselected All" msgstr "모든 선택 해제" #: ../../install_steps_interactive.pm:1 ../../network/tools.pm:1 #, c-format msgid "No partition available" msgstr "사용가능한 파티션이 없습니다." #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Printer Management \n" msgstr "새 프린터 이름" #: ../../standalone/logdrake:1 #, c-format msgid "Domain Name Resolver" msgstr "도메인 네임 해결사" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key (again)" msgstr "암호화 키 (확인)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Samba share name missing!" msgstr "삼바 공유 이름을 찾을 수 없음!" #: ../../standalone/drakfont:1 #, c-format msgid "True Type install done" msgstr "트루타입 설치 완료" #: ../../standalone/harddrake2:1 #, c-format msgid "Detection in progress" msgstr "검색 진행 중" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Whole Kernel -->" msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "modem" msgstr "모델" #: ../../lang.pm:1 #, c-format msgid "Welcome to %s" msgstr "%s에 오신것을 환영합니다." #: ../../standalone/drakhelp:1 #, c-format msgid "" " drakhelp 0.1\n" "Copyright (C) 2003 MandrakeSoft.\n" "This is free software and may be redistributed under the terms of the GNU " "GPL.\n" "\n" "Usage: \n" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "업데이트 모듈 플로피를 %s 드라이브에 넣으세요" #: ../../standalone/drakboot:1 #, c-format msgid "Bootsplash" msgstr "부트스플레쉬" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "시스템 폰트 복사" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer sharing on hosts/networks: " msgstr "파일 공유" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "일반적으로 %s 드라이버는 추가 정보 없이도 잘 작동하지만, 어떤 경우에는 \n" "추가 정보를 필요로 하기도 합니다. 추가 옵션을 지정하시겠습니까, 아니면 \n" "필요한 정보를 자동검색하게 하겠습니까?\n" "자동검색은 어쩌다가 컴퓨터를 멈추게 할 수도 있습니다.하지만,\n" "장치를 훼손하지는 않습니다." #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Daemon, %s via:\n" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Welcome to the Internet Connection Sharing utility!\n" "\n" "%s\n" "\n" "Click on Configure to launch the setup wizard." msgstr "" "인터넷 연결공유 유틸리티에 잘 오셨습니다!\n" "\n" "%s\n" "\n" "마법사를 실행하려면 「설정」을 누르세요." #: ../../lang.pm:1 #, c-format msgid "Cuba" msgstr "쿠바" #: ../../standalone/drakbackup:1 #, c-format msgid "October" msgstr "시월" #: ../../lang.pm:1 #, c-format msgid "Belize" msgstr "벨리즈" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Searching for new printers..." msgstr "유효한 프린터들" #: ../../standalone/drakbackup:1 #, c-format msgid " (multi-session)" msgstr "" #: ../../any.pm:1 #, c-format msgid "Kernel Boot Timeout" msgstr "커널 부트 제한시간" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "님의 카드는 XFree %s로만 가능한 3D 하드웨어 가속기능이 지원됩니다.\n" "님의 카드는 어쩌면 보다 향상된 2D 성능을 보일 수 있는 XFree %s을 지원합니다." #: ../../security/help.pm:1 #, c-format msgid " Activate/Disable daily security check." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-CD-R.\n" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Enable libsafe if libsafe is found on the system" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "드레이크X 파티션 마법사가 다음의 솔루션을 발견했습니다:" #: ../../keyboard.pm:1 #, c-format msgid "Hungarian" msgstr "헝가리" #: ../../network/isdn.pm:1 #, c-format msgid "" "Select your provider.\n" "If it isn't listed, choose Unlisted." msgstr "" "공급자를 선택하세요.\n" "목록에 없으면, 「목록에 없음」을 선택하세요." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "자동 시간 동기화 (NTP 사용)" #: ../../network/adsl.pm:1 #, fuzzy, c-format msgid "Use my Windows partition" msgstr "윈도우즈 파일 시스템의 범위 계산중" #: ../../Xconfig/card.pm:1 #, c-format msgid "8 MB" msgstr "8 MB" #: ../../any.pm:1 #, c-format msgid "LDAP Server" msgstr "LDAP 서버" #: ../../services.pm:1 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" "PCMCIA는 보통 랩탑(노트북)에 있는 이더넷 카드와 모뎀같은 장치\n" "들을 지원하기 위한 것입니다. 추가 설정이 없으면 시작되지 않기 때문에,\n" "이러한 장치가 없는 컴퓨터에 설치되어 있어도 안전합니다." #: ../../network/tools.pm:1 #, c-format msgid "Choose your country" msgstr "국가 선택" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- System Files:\n" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Standalone Tools" msgstr "개별 도구" #: ../../standalone/drakbackup:1 #, c-format msgid "Where" msgstr "장소" #: ../../standalone/logdrake:1 #, c-format msgid "but not matching" msgstr "제외할 문자열" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Configuring PCMCIA cards..." msgstr "PCMCIS 카드 환경설정중..." #: ../../common.pm:1 #, c-format msgid "kdesu missing" msgstr "kdesu가 없음" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s: %s requires a username...\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key" msgstr "암호화 키" #: ../../mouse.pm:1 #, c-format msgid "Microsoft IntelliMouse" msgstr "마이크로소프트 인텔리마우스" #: ../../keyboard.pm:1 #, c-format msgid "" "This setting will be activated after the installation.\n" "During installation, you will need to use the Right Control\n" "key to switch between the different keyboard layouts." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Christmas Island" msgstr "크리스마스 섬" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Installation of bootloader failed. The following error occured:" msgstr "부트로더 설치가 실패했습니다. 다음과 같은 오류가 발생했습니다:" #: ../../standalone/harddrake2:1 #, c-format msgid "EIDE/SCSI channel" msgstr "EIDE/SCSI 채널" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Set this printer as the default" msgstr "이 프린터를 기본으로 설정" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Verify that %s is the correct path" msgstr "이것이 맞습니까?" #: ../../install_interactive.pm:1 #, c-format msgid "partition %s" msgstr "파티션 %s" #: ../../security/level.pm:1 #, c-format msgid "Paranoid" msgstr "최고" #: ../../any.pm:1 #, c-format msgid "NIS" msgstr "NIS" #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Del User" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Location on the bus" msgstr "버스상의 위치" #: ../../printer/printerdrake.pm:1 #, c-format msgid "No printer found!" msgstr "프린터를 찾을 수 없습니다!" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the device" msgstr "" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Erase entire disk" msgstr "전체 디스크 삭제" #: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " (Default)" msgstr " (기본값)" #: ../../standalone/drakgw:1 #, c-format msgid "Automatic reconfiguration" msgstr "자동 재설정" #: ../../standalone/net_monitor:1 #, c-format msgid "Receiving Speed:" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Turks and Caicos Islands" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "No Ip" msgstr "" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "<- Previous" msgstr "<- 이전" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Transfer Now" msgstr "" " 지금 \n" "전송" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Set root password and network authentication methods" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing configuration" msgstr "인터넷 연결공유 설정" #: ../../ugtk2.pm:1 #, c-format msgid "Toggle between flat and group sorted" msgstr "그룹별/팩키지별 정렬 전환" #: ../../standalone/drakboot:1 #, c-format msgid "Themes" msgstr "테마" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Options: %s" msgstr "옵션들: %s" #: ../../standalone/drakboot:1 #, c-format msgid "" "You are currently using %s as your boot manager.\n" "Click on Configure to launch the setup wizard." msgstr "" "현재 부트 관리자로 %s를 사용하고 있습니다.\n" "설정 마법사를 실행하려면 「설정」을 누르세요." #: ../../printer/printerdrake.pm:1 #, c-format msgid "OKI winprinter configuration" msgstr "OKI 윈프린터 설정" #: ../../lang.pm:1 #, c-format msgid "Saint Helena" msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Parallel port #%s" msgstr "프린터 호스트명 또는 IP" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Security Level" msgstr "보안 수준" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "몇몇 단계가 완전히 끝나지 않았습니다.\n" "\n" "정말 지금 종료 하시겠습니까?" #: ../../lang.pm:1 #, c-format msgid "Sudan" msgstr "수단" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwertz layout)" msgstr "폴란드 (QwertZ)" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Syria" msgstr "수리남" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), " "an HP PhotoSmart or an HP LaserJet 2200?" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm:1 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Portuguese" msgstr "포루투칼" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: " msgstr "루프백 파일 이름: " #: ../../network/network.pm:1 #, fuzzy, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "IP 주소는 1.2.3.4과 같은 형식이어야 합니다." #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Left Control key" msgstr "원격 제어" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Serbia" msgstr "시리얼 마우스" #: ../../standalone/drakxtv:1 #, c-format msgid "Newzealand" msgstr "뉴질랜드" #: ../../fsedit.pm:1 #, c-format msgid "This directory should remain within the root filesystem" msgstr "이 디렉토리는 루트 파일시스템 안에 있어야 합니다." #: ../../standalone/drakbackup:1 #, c-format msgid "Across Network" msgstr "네트웍 경유" #: ../../keyboard.pm:1 #, c-format msgid "CapsLock key" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Install bootloader" msgstr "부트로더 설치" #: ../../Xconfig/card.pm:1 #, c-format msgid "Select the memory size of your graphics card" msgstr "그래픽 카드의 메모리 용량을 선택하세요" #: ../../security/help.pm:1 #, c-format msgid "" "Enable/Disable crontab and at for users.\n" "\n" "Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" "and crontab(1))." msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : don't be interactive. To be used with (dis)connect." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Dynamic IP Address Pool:" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "LVM name?" msgstr "LVM 이름?" #: ../../standalone/service_harddrake:1 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "Found %s %s interfaces" msgstr "%s %s 인터페이스가 감지되었습니다." #: ../../standalone/drakfont:1 #, c-format msgid "Post Install" msgstr "후반 설치" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "The internal domain name" msgstr "새 프린터 이름" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IRQ" msgstr "카드 IRQ" #: ../../standalone/logdrake:1 #, c-format msgid "logdrake" msgstr "로그드레이크" #: ../../standalone.pm:1 #, c-format msgid "" "Font Importation and monitoring " "application \n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--strong : strong verification of font.\n" "--install : accept any font file and any directry.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" #: ../../standalone.pm:1 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr "" #: ../../any.pm:1 #, c-format msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "부트 디스크를 만들때 사용할 플로피 드라이브를 선택해 주세요" #: ../../bootloader.pm:1 ../../help.pm:1 #, c-format msgid "LILO with text menu" msgstr "텍스트 메뉴 LILO" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Everything (no firewall)" msgstr "" #: ../../any.pm:1 #, c-format msgid "You must specify a kernel image" msgstr "커널 이미지를 지정해 주세요." #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on USB" msgstr "" #: ../../interactive/newt.pm:1 #, fuzzy, c-format msgid "Do" msgstr "아래로" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "사용가능한 팩키지의 리스트를 미러 사이트에 접속해서 받습니다." #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (old)" msgstr "리투아니아 AZERTY (구형)" #: ../../keyboard.pm:1 #, c-format msgid "Brazilian (ABNT-2)" msgstr "브라질 (ABNT-2)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "IP address of host/network:" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" #: ../../install_gtk.pm:1 #, fuzzy, c-format msgid "System installation" msgstr "SILO 설치" #: ../../lang.pm:1 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid reboot by the console user." msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Open" msgstr "/파일(F)/열기(_O)" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Location of auto_install.cfg file" msgstr "자동 설치 플로피 생성" #: ../../any.pm:1 #, c-format msgid "Open Firmware Delay" msgstr "펌웨어 열기 지연" #: ../../lang.pm:1 #, c-format msgid "Hungary" msgstr "헝가리" #: ../../lang.pm:1 #, c-format msgid "New Zealand" msgstr "뉴질랜드" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Color configuration" msgstr "경고 설정" #: ../../security/level.pm:1 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "please choose the date to restore" msgstr "복구할 날짜를 선택하세요." #: ../../lang.pm:1 #, c-format msgid "Netherlands Antilles" msgstr "네델란드령 앤틸레스 열도" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Switching from ext2 to ext3" msgstr "EXT2에서 EXT3로 변경" #: ../../printer/data.pm:1 #, c-format msgid "LPRng" msgstr "LPRng" #: ../../standalone/drakbackup:1 #, c-format msgid "Browse to new restore repository." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "and %d unknown printers" msgstr "새 프린터 추가" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Backup quota exceeded!\n" "%d MB used vs %d MB allocated." msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "ISDN PCI 카드 검색 실패. 다음 화면에서 직접 선택해 주세요." #: ../../common.pm:1 #, c-format msgid "GB" msgstr "GB" #: ../../any.pm:1 #, c-format msgid "Please give a user name" msgstr "사용자명을 입력해 주세요" #: ../../any.pm:1 #, c-format msgid "Enable CD Boot?" msgstr "CD 부팅 허용?" #: ../../interactive/stdio.pm:1 #, c-format msgid " enter `void' for void entry" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backups on unmountable media - Use Catalog to restore" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "January" msgstr "일월" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Password history length" msgstr "이 암호는 너무 단순합니다." #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Winmodem connection" msgstr "일반 모뎀 연결" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the Mandrake Control " "Center." msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "이제 [xawtv]를 (X윈도우 하에서) 사용할 수 있습니다!\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "스왑 메모리가 부족합니다. 좀 더 추가하세요." #. -PO: example: lilo-graphic on /dev/hda1 #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "%s on %s" msgstr "포트" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Allow/Forbid remote root login." msgstr "(이 서버상의)" #: ../../help.pm:1 #, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"%s\", which will let GNU/Linux know that the system clock and the\n" "hardware clock are in the same timezone. This is useful when the machine\n" "also hosts another operating system like Windows.\n" "\n" "The \"%s\" option will automatically regulate the clock by connecting to a\n" "remote time server on the Internet. For this feature to work, you must have\n" "a working Internet connection. It is best to choose a time server located\n" "near you. This option actually installs a time server that can used by\n" "other machines on your local network as well." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Which is your timezone?" msgstr "님의 시간대는 어디입니까?" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't create log file!" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Use .backupignore files" msgstr "백업 파일에 쿼터 사용" #: ../../lang.pm:1 #, c-format msgid "Guinea" msgstr "기니" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "The system is now connected to the Internet." msgstr "지금 시스템이 인터넷에 연결되었습니다." #: ../../lang.pm:1 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (broadcast)" msgstr "일본 (공중파)" #: ../../help.pm:1 #, c-format msgid "" "Monitor\n" "\n" " The installer will normally automatically detect and configure the\n" "monitor connected to your machine. If it is incorrect, you can choose from\n" "this list the monitor you actually have connected to your computer." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Mozambique" msgstr "모잠비크" #: ../../any.pm:1 #, c-format msgid "Icon" msgstr "아이콘" #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose what you want to backup" msgstr "백업할 대상을 선택하세요." #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "256 colors (8 bits)" msgstr "256 색상 (8 bits)" #: ../../any.pm:1 #, c-format msgid "Read-write" msgstr "읽기-쓰기" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size: %s\n" msgstr "크기: %s\n" #: ../../standalone/drakconnect:1 #, c-format msgid "Hostname: " msgstr "호스트명:" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Add a rule" msgstr "규칙 추가" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Chunk size %s\n" msgstr "크기 %s\n" #: ../../share/advertising/02-community.pl:1 #, c-format msgid "Build the future of Linux!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Local Printer" msgstr "지역 프린터" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "Floppy access error, unable to mount device %s" msgstr "장치 %s를 어디에 마운트 하시겠습니까?" #: ../../standalone.pm:1 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "ADSL connection" msgstr "ADSL 연결" #: ../../standalone/drakbackup:1 #, c-format msgid "No configuration, please click Wizard or Advanced.\n" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "Error!" msgstr "오류!" #: ../../network/netconnect.pm:1 #, c-format msgid "cable connection detected" msgstr "캐이블 연결 발견" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission denied transferring %s to %s" msgstr "" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "/_Report Bug" msgstr "/버그 보고(_R)" #: ../../lang.pm:1 #, c-format msgid "Dominica" msgstr "도미니카" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Resize" msgstr "크기조정" #: ../../Xconfig/various.pm:1 #, c-format msgid "Resolution: %s\n" msgstr "해상도: %s\n" #: ../../install2.pm:1 #, c-format msgid "" "Can't access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "정확한 포트를 선택하세요. 예를 들어, MS 윈도우즈에서 COM1은\n" "리눅스에서는 ttyS0로 명명됩니다." #: ../../install_steps_gtk.pm:1 #, c-format msgid "The following packages are going to be removed" msgstr "다음 팩키지들이 제거될 것입니다." #: ../../network/adsl.pm:1 ../../network/ethernet.pm:1 #, c-format msgid "Connect to the Internet" msgstr "인터넷에 연결" #: ../../install_interactive.pm:1 #, c-format msgid "Use existing partitions" msgstr "기존의 파티션 사용" #: ../../keyboard.pm:1 #, c-format msgid "Canadian (Quebec)" msgstr "캐나다 (퀘벡)" #: ../../Xconfig/various.pm:1 #, c-format msgid "Mouse device: %s\n" msgstr "마우스 장치: %s\n" #: ../../standalone/drakfont:1 #, c-format msgid "Reselect correct fonts" msgstr "올바른 폰트 재선택" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Options\n" "\n" " Here you can choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"%s\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" "마지막으로, 부팅시에 자동으로 그래픽 환경을 사용할 것인지를 질문할 것입니" "다.\n" "주의: 이 질문은 설정을 테스트하지 않았을지라도 나타나게 될 것입니다.\n" "시스템을 확실히 서버용으로 사용할 것이거나, 화면 설정에 성공하지 못한 경우라" "면\n" "「아니오」를 누르세요." #: ../../share/advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "MandrakeExpert Corporate" msgstr "맨드레이크 전문가 법인" #: ../../standalone.pm:1 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Write protection" msgstr "프린터 자동 검색" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "You've not selected any font" msgstr "폰트를 찾을 수 없었습니다.\n" #: ../../steps.pm:1 #, c-format msgid "Language" msgstr "언어 선택" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer model selection" msgstr "프린터 모델 선택" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "%s의 파티션 유형을 변경후 이 파티션내의 모든 자료를 잃게 됩니다." #: ../../common.pm:1 #, c-format msgid "%d seconds" msgstr "%d 초" #: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "%s 드라이브에 빈 플로피 디스크를 넣으세요" #: ../../printer/printerdrake.pm:1 #, c-format msgid "A valid URI must be entered!" msgstr "유효한 주소를 입력하세요!" #: ../../network/isdn.pm:1 #, c-format msgid "Found \"%s\" interface do you want to use it ?" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Re-configure interface and DHCP server" msgstr "인터페이스와 DHCP 서버 재설정" #: ../../harddrake/sound.pm:1 #, c-format msgid "Sound configuration" msgstr "사운드 설정" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Photo test page" msgstr "사진 시험 페이지" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Custom disk partitioning" msgstr "사용자 정의 파티션 나누기" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter Printer Name and Comments" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "시스템 폰트 복사" #: ../../network/modem.pm:1 #, c-format msgid "You don't have any winmodem" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "type: %s" msgstr "유형: " #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTY)" msgstr "슬로바키아 (QWERTY)" #: ../../standalone/drakbackup:1 #, c-format msgid "" "This should be a comma-separated list of local users or email addresses that " "you want the backup results sent to. You will need a functioning mail " "transfer agent setup on your system." msgstr "" #: ../../standalone/draksound:1 #, c-format msgid "No Sound Card detected!" msgstr "사운드카드를 찾을 수 없습니다!" #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format msgid "Mouse Port" msgstr "마우스 포트" #: ../../security/l10n.pm:1 #, c-format msgid "Check for unsecured accounts" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Ftp Server" msgstr "FTP 서버" #: ../../lang.pm:1 #, c-format msgid "Uganda" msgstr "우간다" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "%s fonts conversion" msgstr "pfm 폰트 변환" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "the type of bus on which the mouse is connected" msgstr "어떤 시리얼 포트에 마우스가 연결되어 있나요?" #: ../../help.pm:1 #, c-format msgid "" "As a review, DrakX will present a summary of information it has about your\n" "system. Depending on your installed hardware, you may have some or all of\n" "the following entries. Each entry is made up of the configuration item to\n" "be configured, followed by a quick summary of the current configuration.\n" "Click on the corresponding \"%s\" button to change that.\n" "\n" " * \"%s\": check the current keyboard map configuration and change that if\n" "necessary.\n" "\n" " * \"%s\": check the current country selection. If you are not in this\n" "country, click on the \"%s\" button and choose another one. If your country\n" "is not in the first list shown, click the \"%s\" button to get the complete\n" "country list.\n" "\n" " * \"%s\": By default, DrakX deduces your time zone based on the country\n" "you have chosen. You can click on the \"%s\" button here if this is not\n" "correct.\n" "\n" " * \"%s\": check the current mouse configuration and click on the button to\n" "change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it is displayed\n" "here. If you notice the sound card displayed is not the one that is\n" "actually present on your system, you can click on the button and choose\n" "another driver.\n" "\n" " * \"%s\": by default, DrakX configures your graphical interface in\n" "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" "\"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": if a TV card is detected on your system, it is displayed here.\n" "If you have a TV card and it is not detected, click on \"%s\" to try to\n" "configure it manually.\n" "\n" " * \"%s\": if an ISDN card is detected on your system, it will be displayed\n" "here. You can click on \"%s\" to change the parameters associated with the\n" "card.\n" "\n" " * \"%s\": If you want to configure your Internet or local network access\n" "now.\n" "\n" " * \"%s\": this entry allows you to redefine the security level as set in a\n" "previous step ().\n" "\n" " * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" "idea to protect yourself from intrusions by setting up a firewall. Consult\n" "the corresponding section of the ``Starter Guide'' for details about\n" "firewall settings.\n" "\n" " * \"%s\": if you wish to change your bootloader configuration, click that\n" "button. This should be reserved to advanced users.\n" "\n" " * \"%s\": here you'll be able to fine control which services will be run\n" "on your machine. If you plan to use this machine as a server it's a good\n" "idea to review this setup." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Comoros" msgstr "코모로스" #: ../../standalone/drakbackup:1 #, c-format msgid "May" msgstr "오월" #: ../../standalone/drakboot:1 #, c-format msgid "Yaboot mode" msgstr "Yaboot 모드" #: ../../mouse.pm:1 #, c-format msgid "Generic 3 Button Mouse" msgstr "일반적인 3버튼 마우스" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable)" msgstr "미국 (케이블)" #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't relaunch LiLo!\n" "Launch \"lilo\" as root in command line to complete LiLo theme installation." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Select another media to restore from" msgstr "다른 복구 매체 선택" #: ../../standalone/drakbug:1 #, c-format msgid "Software Manager" msgstr "소프트웨어 관리자" #: ../../interactive/stdio.pm:1 #, c-format msgid "Re-submit" msgstr "재전송" #: ../../standalone/drakbackup:1 #, c-format msgid "CD in place - continue." msgstr "" #: ../../common.pm:1 #, c-format msgid "KB" msgstr "KB" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Network & Internet" msgstr "네트웍 인터페이스" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"phonetic\" QWERTY" msgstr "리투아니아 (음성학 QWERTY)" #: ../../standalone/drakTermServ:1 #, c-format msgid "Net Boot Images" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Sharing of local scanners" msgstr "유효한 프린터들" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "" #: ../../services.pm:1 #, c-format msgid "Services and deamons" msgstr "서비스와 대몬" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote host name missing!" msgstr "원격 호스트명을 찾을 수 없음!" #: ../../fsedit.pm:1 #, c-format msgid "with /usr" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../standalone/drakbackup:1 #, c-format msgid "Network" msgstr "네트웍" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" #: ../../any.pm:1 #, c-format msgid "This password is too simple" msgstr "이 암호는 너무 단순합니다." #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Chkconfig obey msec rules" msgstr "서비스 설정" #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTZ)" msgstr "슬로바키아 (QWERTZ)" #: ../../share/advertising/06-development.pl:1 #, c-format msgid "" "To modify and to create in different languages such as Perl, Python, C and C+" "+ has never been so easy thanks to GNU gcc 3 and the best Open Source " "development environments." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "No devices found" msgstr "프린터를 찾을 수 없습니다!" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use daemon" msgstr "대몬 사용" #: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1 #: ../../standalone/drakauth:1 ../../standalone/drakconnect:1 #: ../../standalone/logdrake:1 #, c-format msgid "Authentication" msgstr "사용자 인증" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add this printer to Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Additional CUPS servers: " msgstr "CUPS 서버 IP" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) in the input fields." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount %s?" msgstr "%s를 어디에 마운트 하시겠습니까?" #: ../../lang.pm:1 #, c-format msgid "Algeria" msgstr "알제리" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Via Network" msgstr "네트웍을 통한 복구" #: ../../any.pm:1 #, c-format msgid "Initrd-size" msgstr "램디스크 용량" #: ../../help.pm:1 #, c-format msgid "" "In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\tBackups use tar and gzip\n" msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Set as default" msgstr "기본값" #: ../../Xconfig/card.pm:1 #, c-format msgid "2 MB" msgstr "2 MB" #: ../../printer/main.pm:1 ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Configured on this machine" msgstr "(이 서버상의)" #: ../../keyboard.pm:1 #, c-format msgid "Both Control keys simultaneously" msgstr "" #: ../../standalone/drakhelp:1 #, c-format msgid " --help - display this help \n" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation don't ask first confirmation question in " "MandrakeUpdate mode\n" " --no-verify-rpm don't verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Setting Default Printer..." msgstr "기본 프린터" #: ../../standalone/drakgw:1 #, c-format msgid "Interface %s (using module %s)" msgstr "인터페이스 %s (%s 모듈 사용)" #: ../../standalone/draksplash:1 #, c-format msgid "Generating preview ..." msgstr "미리보기 생성 중 ..." #: ../../network/network.pm:1 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "ignore" msgstr "싱가포르" #: ../../security/help.pm:1 #, c-format msgid "" "Allow/Forbid X connections:\n" "\n" "- ALL (all connections are allowed),\n" "\n" "- LOCAL (only connection from local machine),\n" "\n" "- NONE (no connection)." msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on parallel port #%s" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "serial" msgstr "시리얼 마우스" #: ../../harddrake/data.pm:1 #, c-format msgid "DVD-ROM" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Latin\" layout)" msgstr "그루지아 (라틴)" #: ../../share/advertising/09-mdksecure.pl:1 #, c-format msgid "Get the best items with Mandrake Linux Strategic partners" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Kenya" msgstr "케냐" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``Unmount'' first" msgstr "「언마운트」를 먼저 사용하세요" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing mtools packages..." msgstr "팩키지 설치 중..." #: ../../any.pm:1 #, c-format msgid "You must specify a root partition" msgstr "루트 파티션은 반드시 지정되어야 합니다." #: ../../standalone/draksplash:1 #, c-format msgid "first step creation" msgstr "첫 단계 생성" #: ../../keyboard.pm:1 #, c-format msgid "Both Shift keys simultaneously" msgstr "" #: ../../standalone/drakhelp:1 #, c-format msgid "" " --id - load the html help page which refers to id_label\n" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Select a scanner model" msgstr "스캐너 선택" #: ../../security/help.pm:1 #, c-format msgid "Accept/Refuse bogus IPv4 error messages." msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "LPRng - LPR New Generation" msgstr "LPRng - LPR New Generation" #: ../../standalone/drakbackup:1 #, c-format msgid "Drakbackup Configuration" msgstr "드레이크 백업 설정" #: ../../standalone/logdrake:1 #, c-format msgid "Save as.." msgstr "새 이름으로 저장" #: ../../lang.pm:1 #, c-format msgid "Korea (North)" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "" "This interface has not been configured yet.\n" "Launch the configuration wizard in the main window" msgstr "" #: ../../install_gtk.pm:1 #, fuzzy, c-format msgid "System configuration" msgstr "경고 설정" #: ../../any.pm:1 ../../security/l10n.pm:1 #, c-format msgid "Autologin" msgstr "자동로그인" #: ../../any.pm:1 #, c-format msgid "Domain Admin Password" msgstr "" #: ../../share/advertising/05-desktop.pl:1 #, c-format msgid "" "Perfectly adapt your computer to your needs thanks to the 11 available " "Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME " "2.2, Window Maker, ..." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Configuring printer ..." msgstr "프린터 「%s」 설정 중 ..." #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" #: ../../common.pm:1 #, c-format msgid "MB" msgstr "MB" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (British)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Bermuda" msgstr "버뮤다" #: ../../standalone/drakfont:1 #, c-format msgid "click here if you are sure." msgstr "이상이 없으면 여기를 누르세요." #: ../../standalone/drakbackup:1 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Listed here are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "선택된 하드디스크상의 기존 리눅스 파티션이 위에 열거되어 있습니다.\n" "마법사에 의해 이미 설정된 사항을 보존할 수도 있으며, 이는 대부분의 일반\n" "설치에 적절한 설정입니다. 만약 직접 변경하시겠다면, 최소한 루트 파티션" "(「/」)\n" "은 반드시 지정해야 합니다. 너무 작은 파티션을 선택하지는 마세요. 충분한 소프" "트웨어\n" "를 설치하지 못하는 수가 있습니다. 만약 개인 데이터가 별도의 파티션에 저장되도" "록\n" "하고 싶다면, 「/home」파티션을 별도로 만드세요.(오직 리눅스 파티션이 둘 이상" "일\n" "경우에만 가능합니다.)\n" "\n" "각 파티션은 다음과 같이 열거됩니다: 「이름」,「용량」.\n" "\n" "「이름」영역의 구조: 「하드디스크 유형」,「하드디스크 번호」,\n" "「파티션 번호」(가령, 「hda1」).\n" "\n" "「하드디스크 유형」은, IDE 디스크일 경우에는 「hd」이며,\n" "SCSI 디스크일 경우에는 「sd」입니다.\n" "\n" "「하드디스크 번호」는 항상 「hd」또는 「sd」뒤에 오는 문자입니다.\n" "IDE 하드디스크의 경우:\n" "\n" " ○ 「a」는 「주 IDE 제어기상의 주 디스크」를 의미합니다.\n" "\n" " ○ 「b」는 「주 IDE 제어기상의 보조 디스크」를 의미합니다.\n" "\n" " ○ 「c」는 「보조 IDE 제어기상의 주 디스크」를 의미합니다.\n" "\n" " ○ 「d」는 「보조 IDE 제어기상의 보조 디스크」를 의미합니다.\n" "\n" "SCSI 하드디스크의 경우, 「a」는 「최소 SCSI ID」, 「b」는 「다음 최소 SCSI " "ID」\n" "와 같은 식으로 의미를 가집니다." #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, fuzzy, c-format msgid "Remove" msgstr "제거 목록" #: ../../lang.pm:1 #, c-format msgid "Lesotho" msgstr "레소토" #: ../../ugtk2.pm:1 #, c-format msgid "utopia 25" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Pipe job into a command" msgstr "작업을 명령으로 파이프 연결" #: ../../lang.pm:1 #, c-format msgid "Cote d'Ivoire" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "" #: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1 #: ../../standalone/harddrake2:1 #, c-format msgid "Yes" msgstr "예" #: ../../network/isdn.pm:1 #, c-format msgid "Which protocol do you want to use?" msgstr "어떤 프로토콜을 사용하시겠습니까?" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Progress" msgstr "복구 진행" #: ../../lang.pm:1 #, c-format msgid "Estonia" msgstr "에스토니아" #: ../../standalone/scannerdrake:1 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "파티션 테이블에서 빈 공간이 있지만 사용할 수 없습니다.\n" "유일한 해결책은 주 파티션들이 확장 파티션들의 뒤에 있는 빈 공간을 차지하도록 " "옴기는 것입니다." #: ../../standalone/harddrake2:1 #, c-format msgid "Channel" msgstr "채널" #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "Add" msgstr "추가" #: ../../standalone/drakgw:1 #, c-format msgid "No Internet Connection Sharing has ever been configured." msgstr "어떠한 인터넷 연결 공유도 설정된 적이 없습니다." #: ../../standalone/drakbackup:1 #, c-format msgid " Error while sending mail. \n" msgstr "메일 전송 중 오류.\n" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../standalone/keyboarddrake:1 #, c-format msgid "Keyboard" msgstr "키보드" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Choose the connection you want to configure" msgstr "설정할 연결을 선택하세요." #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Please wait, setting security level..." msgstr "희망하는 보안 단계를 선택해 주세요." #: ../../network/network.pm:1 #, c-format msgid "Configuring network device %s" msgstr "%s 네트웍 카드 설정중" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "activated" msgstr "지금 활성화" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Please choose which network interface will be used for the dhcp server." msgstr "어떤 어댑터로 인터넷에 연결할 것인지 선택하세요." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Finding packages to upgrade..." msgstr "업그레이드할 팩키지를 검색중입니다." #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Mount point: " msgstr "마운트 위치: " #: ../../standalone/drakfont:1 #, c-format msgid "parse all fonts" msgstr "모든 폰트 분석" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Allow/Forbid direct root login." msgstr "(이 서버상의)" #: ../../security/help.pm:1 #, c-format msgid " Accept/Refuse broadcasted icmp echo." msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "With X" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Multi-head configuration" msgstr "다중 헤드 설정" #: ../../standalone/drakbug:1 #, c-format msgid "No browser available! Please install one" msgstr "브라우저를 찾을 수 없습니다! 설치해 주세요." #: ../../Xconfig/main.pm:1 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "변경사항을 저장할까요?\n" "현재 설정:\n" "\n" "%s" #: ../../fsedit.pm:1 #, c-format msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "32MB 미만의 파티션에는 ReiserFS 파일 시스템을 사용할 수 없습니다." #: ../../services.pm:1 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" "rwho 프로토콜은 (finger와 비슷하게) rwho 대몬이 실행되고\n" "있는 컴퓨터에 로그인한 사용자 목록을 원격 사용자가 볼 수 있게 합니다." #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Domain name" msgstr "도메인 이름" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Sharing of local printers" msgstr "유효한 프린터들" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable libsafe if libsafe is found on the system." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Available printers" msgstr "유효한 프린터들" #: ../../standalone/drakbackup:1 #, c-format msgid "NO" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Empty" msgstr "빈공간" #: ../../standalone/draksplash:1 #, c-format msgid "text width" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount device %s?" msgstr "장치 %s를 어디에 마운트 하시겠습니까?" #: ../../standalone/drakgw:1 #, c-format msgid "The default lease (in seconds)" msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "" "We are now going to configure the %s connection.\n" "\n" "\n" "Press \"%s\" to continue." msgstr "" "\n" "\n" "\n" "이제 「%s」연결을 설정할 것입니다.\n" "\n" "\n" "시작하려면 「확인」을 누르세요." #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Interface \"%s\"" msgstr "인터페이스 %s" #: ../../install_steps_interactive.pm:1 #, c-format msgid "With basic documentation (recommended!)" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "1 button" msgstr "1 버튼" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" #: ../../Xconfig/main.pm:1 #, c-format msgid "Test" msgstr "테스트" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Korea" msgstr "추가 옵션" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "님의 선택은? (기본값 「%s」%s) " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Raw printer" msgstr "날(RAW) 프린터" #: ../../standalone/harddrake2:1 #, c-format msgid "official vendor name of the cpu" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Useless without Terminal Server" msgstr "" #: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Vendor" msgstr "상표" #: ../../standalone/drakgw:1 #, c-format msgid "Interface %s" msgstr "인터페이스 %s" #: ../../steps.pm:1 #, c-format msgid "Configure mouse" msgstr "마우스 설정" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the mount points" msgstr "마운트 위치를 선택해 주세요." #: ../../help.pm:1 ../../standalone/drakTermServ:1 ../../standalone/drakfont:1 #, c-format msgid "OK" msgstr "확인" #: ../../keyboard.pm:1 #, c-format msgid "Yugoslavian (latin)" msgstr "유고슬라비아 (라틴)" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Installing" msgstr "설치중" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Logitech MouseMan with Wheel emulation" msgstr "로지텍 마우스맨" #: ../../any.pm:1 #, c-format msgid "Launch userdrake" msgstr "사용자드레이크 실행" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Is this an install or an upgrade?" msgstr "설치합니까 아니면 업데이트 합니까?" #: ../../help.pm:1 #, fuzzy, c-format msgid "ISDN card" msgstr "내장 ISDN 카드" #: ../../share/advertising/02-community.pl:1 #, c-format msgid "" "To share your own knowledge and help build Linux software, join our " "discussion forums on our \"Community\" webpages." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Hard drive.\n" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "This step is activated only if an old GNU/Linux partition has been found on\n" "your machine.\n" "\n" "DrakX now needs to know if you want to perform a new install or an upgrade\n" "of an existing Mandrake Linux system:\n" "\n" " * \"%s\": For the most part, this completely wipes out the old system. If\n" "you wish to change how your hard drives are partitioned, or change the file\n" "system, you should use this option. However, depending on your partitioning\n" "scheme, you can prevent some of your existing data from being over-written.\n" "\n" " * \"%s\": this installation class allows you to update the packages\n" "currently installed on your Mandrake Linux system. Your current\n" "partitioning scheme and user data is not altered. Most of other\n" "configuration steps remain available, similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n" "running version \"8.1\" or later. Performing an Upgrade on versions prior\n" "to Mandrake Linux version \"8.1\" is not recommended." msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Printer on remote CUPS server" msgstr "원격 CUPS 서버의 프린터" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "here if no." msgstr "그렇지 않다면, 여기를 누르세요." #: ../../network/network.pm:1 #, fuzzy, c-format msgid "DHCP host name" msgstr "호스트명:" #: ../../standalone/drakgw:1 #, c-format msgid "The maximum lease (in seconds)" msgstr "" #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "어떤 시리얼 포트에 마우스가 연결되어 있나요?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Did it work properly?" msgstr "올바르게 작동했습니까?" #: ../../fs.pm:1 #, c-format msgid "Mount the file system read-only." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Poor" msgstr "최저" #: ../../security/l10n.pm:1 #, c-format msgid "Report check result by mail" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Grenada" msgstr "그레나다" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP start range" msgstr "" #: ../../any.pm:1 #, c-format msgid "Unsafe" msgstr "위험" #: ../../diskdrake/interactive.pm:1 #, c-format msgid ", %s sectors" msgstr ", %s 섹터" #: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 #: ../../standalone/harddrake2:1 #, c-format msgid "No" msgstr "아니오" #: ../../lang.pm:1 #, c-format msgid "Guadeloupe" msgstr "" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Kannada" msgstr "캐나다" #: ../../standalone/drakfont:1 #, c-format msgid "could not find any font.\n" msgstr "폰트를 찾을 수 없었습니다.\n" #: ../../standalone/keyboarddrake:1 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "콘솔에서 백스페이스 키가 지우기를 하도록 하시겠습니까?" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Vertical refresh rate" msgstr "수직 주파수" #: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1 #, c-format msgid "Entering step `%s'\n" msgstr "%s 단계로 넘어갑니다.\n" #: ../../lang.pm:1 #, c-format msgid "Niger" msgstr "니제르" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan" msgstr "로지텍 마우스맨" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Removing %s ..." msgstr "%s 제거 중" #: ../../install_steps_interactive.pm:1 #, c-format msgid "No printer" msgstr "프린터 없음" #: ../../standalone/logdrake:1 #, c-format msgid "alert configuration" msgstr "경고 설정" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NetWare Printer Options" msgstr "넷웨어 프린터 옵션" #: ../../standalone/draksplash:1 #, c-format msgid "%s BootSplash (%s) preview" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "February" msgstr "이월" #: ../../standalone/drakfloppy:1 #, c-format msgid "General" msgstr "일반 영역" #: ../../security/l10n.pm:1 #, c-format msgid "/etc/issue* exist" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Add a user" msgstr "사용자 추가" #: ../../standalone/drakconnect:1 #, c-format msgid "Network configuration (%d adapters)" msgstr "네트웍 설정 (%d 어뎁터)" #: ../../standalone/drakbackup:1 #, c-format msgid "April" msgstr "사월" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Deactivate now" msgstr "지금 비활성화" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, c-format msgid "Mandatory package %s is missing" msgstr "필수 팩키지 %s가 없습니다." #: ../../lang.pm:1 #, c-format msgid "Philippines" msgstr "필리핀" #: ../../interactive.pm:1 ../../ugtk2.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/gtk.pm:1 #: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 #: ../../interactive/stdio.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 ../../standalone/drakperm:1 #: ../../standalone/draksec:1 ../../standalone/mousedrake:1 #: ../../standalone/net_monitor:1 #, c-format msgid "Ok" msgstr "확인" #: ../../standalone/drakTermServ:1 #, c-format msgid "drakTermServ Overview" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print Queue Name" msgstr "프린트 큐 이름" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Do you want to use aboot?" msgstr "aboot를 사용하시겠습니까?" #: ../../keyboard.pm:1 #, c-format msgid "Belarusian" msgstr "벨라루시아" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" "LPQ는 단지 지역 프린터, 원격 LPD 프린터 그리고 소켓/TCP 프린터만을 지원합니" "다.\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Move files to the new partition" msgstr "새 파티션으로 파일 옴기기" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Add here the CUPS servers whose printers you want to use. You only need to " "do this if the servers do not broadcast their printer information into the " "local network." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Pitcairn" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From Catalog" msgstr "카탈로그로부터 복구" #: ../../install_steps_interactive.pm:1 #, c-format msgid "IDE" msgstr "IDE" #: ../../fs.pm:1 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo screen" msgstr "릴로 스크린" #: ../../bootloader.pm:1 ../../help.pm:1 #, c-format msgid "LILO with graphical menu" msgstr "그래픽 메뉴 LILO" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Estimating" msgstr "계산 중" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It is already installed" msgstr "이 팩키지를 선택해제할 수 없습니다. 이미 설치 되었습니다." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr "삼바/윈도우즈 95/98/NT상의 프린터" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Go on anyway?" msgstr "계속 진행합니까?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "유효한 팩키지 검색 및 RPM 데이터베이스 재조합 중..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Report \n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Does not appear to be recordable media!" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "Specify options" msgstr "옵션 지정" #: ../../lang.pm:1 #, c-format msgid "Vanuatu" msgstr "바누아투" #: ../../standalone/drakbackup:1 #, c-format msgid "New user list:\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "서버 이름 또는 서버 IP를 입력해야 합니다!" #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr " %s 마운트 위치에는 암호화 파일시스템을 사용할 수 없습니다. " #: ../../security/help.pm:1 #, c-format msgid "Set the password history length to prevent password reuse." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Norfolk Island" msgstr "노퍽 섬" #: ../../standalone/drakboot:1 #, c-format msgid "Theme installation failed!" msgstr "테마 설치 실패!" #: ../../fsedit.pm:1 #, c-format msgid "Nothing to do" msgstr "할 일 없음." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Use for loopback" msgstr "루프백으로 사용" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Bug Report Tool" msgstr "맨드레이크 버그 보고 도구" #: ../../standalone/printerdrake:1 #, c-format msgid "Apply filter" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "use pppoe" msgstr "PPPOE 사용" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving files to the new partition" msgstr "새 파티션으로 파일 옴기는 중" #: ../../Xconfig/card.pm:1 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "XFree %s를 사용한 실험적 3D 하드웨어 가속" #: ../../help.pm:1 ../../interactive.pm:1 #, c-format msgid "Advanced" msgstr "고급" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transfer" msgstr "전송" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (Swedish)" msgstr "드보락(스웨덴)" #: ../../lang.pm:1 #, c-format msgid "Afghanistan" msgstr "아프가니스탄" #: ../../standalone/drakbackup:1 #, c-format msgid "More Options" msgstr "추가 옵션" #: ../../standalone/drakbackup:1 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Burundi" msgstr "부룬디" #: ../../services.pm:1 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "cron은 사용자가 지정한 프로그램을 주기적으로 특정 시간에 실행시키는 \n" "표준 UNIX 프로그램입니다. vixie cron은 이 기본 UNIX Cron에 향상된 보안과 \n" "더 강력한 설정옵션 등의 많은 특징을 추가합니다." #: ../../standalone/drakTermServ:1 #, c-format msgid "Add Client -->" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Read carefully!" msgstr "주의깊게 읽으세요!" #: ../../standalone/drakbackup:1 #, c-format msgid "RW" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" "TV 노옴과 국가를\n" "입력하세요." #: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Port" msgstr "포트" #: ../../standalone/drakgw:1 #, c-format msgid "No (experts only)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "No kernel selected!" msgstr "커널이 선택되지 않았습니다!" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Set-GID" msgstr "GID 설정" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "The encryption keys do not match" msgstr "암호화 키가 일치하지 않습니다." #: ../../standalone/drakbackup:1 #, c-format msgid "" "For a multisession CD, only the first session will erase the cdrw. Otherwise " "the cdrw is erased before each backup." msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "USB printer" msgstr "프린터 없음" #: ../../keyboard.pm:1 #, c-format msgid "Right \"Windows\" key" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandrake Linux distribution. If you do agree with all the\n" "terms in it, check the \"%s\" box. If not, simply turn off your computer." msgstr "" "더 진행하기 전에 사용자 계약서를 자세하게 읽어 보세요.\n" "사용자 계약서는 전체 맨드레이크 리눅스 배포본을 포괄하는 내용이며,\n" "만약 동의하지 않으신다면 「거부」버튼을 누르세요. 거부 버튼은 현재 설치를\n" "즉각 종료하게 합니다. 설치를 계속하고 싶다면 「동의」버튼을 누르세요." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolutions" msgstr "해상도" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrake Linux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" "드레이크 방화벽 관리자\n" "\n" "이것은 맨드레이크 리눅스 시스템의 개인 방화벽을 설정합니다.\n" "강력한 전문 방화벽을 사용하고 싶다면, 맨드레이크 보안 방화벽\n" "배포판을 구하시기 바랍니다." #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Remove selected host" msgstr "선택 항목 제거" #: ../../network/netconnect.pm:1 #, c-format msgid "Network configuration" msgstr "네트웍 설정" #: ../../any.pm:1 #, c-format msgid "No sharing" msgstr "비공유" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule down one level" msgstr "선택된 규칙 한 단계 아래로" #: ../../common.pm:1 #, c-format msgid "TB" msgstr "TB" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "FATAL" msgstr "FAT" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Refresh the list" msgstr "사용자 목록" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Per client %s:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tdrakTermServ will help create these files." msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "" "The DHCP server will allow other computer to boot using PXE in the given " "range of address.\n" "\n" "The network address is %s using a netmask of %s.\n" "\n" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../standalone/drakperm:1 ../../standalone/printerdrake:1 #, c-format msgid "Delete" msgstr "삭제" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface " "(XFree) upon booting.\n" "Would you like XFree to start when you reboot?" msgstr "" "부팅시에 자동으로 X윈도우가 시작되도록 할수 있습니다.\n" "다시 부팅했을때 자동으로 X윈도가 시작되길 원하세요?" #: ../../standalone/drakfloppy:1 #, c-format msgid "Build the disk" msgstr "디스크 생성" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Disconnect %s" msgstr "연결 끊기" #: ../../standalone/drakconnect:1 #, c-format msgid "Status:" msgstr "상태:" #: ../../network/network.pm:1 #, c-format msgid "HTTP proxy" msgstr "웹 프락시" #: ../../standalone/logdrake:1 #, c-format msgid "SSH Server" msgstr "SSH 서비스" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by rsync.\n" msgstr "" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "European protocol" msgstr "유럽 프로토콜" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Note that currently all 'net' media also use the hard drive." msgstr "" #: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1 #: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 #: ../../standalone/drakboot:1 ../../standalone/drakbug:1 #: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 #: ../../standalone/draksplash:1 #, c-format msgid "Error" msgstr "오류" #: ../../any.pm:1 #, c-format msgid "allow \"su\"" msgstr "「su」허용" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Australia" msgstr "오스트레일리아" #: ../../standalone/drakfont:1 #, c-format msgid "please wait during ttmkfdir..." msgstr "기다려 주세요. ttmkfdir 실행 중..." #: ../../Xconfig/card.pm:1 #, c-format msgid "Configure only card \"%s\"%s" msgstr "「%s」%s 카드만 설정" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Level" msgstr "레벨" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Change the printing system" msgstr "인쇄시스템 변경" #: ../../Xconfig/card.pm:1 #, fuzzy, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" "님의 시스템은 다중 헤드 설정을 지원합니다.\n" "어떻게 하시겠습니까?" #: ../../steps.pm:1 #, c-format msgid "Configure services" msgstr "서비스 설정" #: ../../standalone/drakTermServ:1 #, c-format msgid "Broadcast Address:" msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "mount failed: " msgstr "마운트 실패: " #: ../../standalone/harddrake2:1 #, c-format msgid "" "the GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" #: ../../any.pm:1 #, c-format msgid "Image" msgstr "이미지" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../services.pm:1 #, c-format msgid "Remote Administration" msgstr "원격 관리" #: ../../modules.pm:1 #, c-format msgid "" "PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Selected All" msgstr "모두 선택" #: ../../printer/data.pm:1 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "CUPS - Common Unix Printing System" #: ../../standalone/logdrake:1 #, c-format msgid "Webmin Service" msgstr "웹민 서비스" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "device" msgstr "장치" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Enter the directory to save to:" msgstr "저장할 디렉토리를 선택하세요." #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Greece" msgstr "그리스" #: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "All" msgstr "모두" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "어떤 인쇄 시스템(스풀러)을 사용하시겠습니까?" #: ../../standalone/drakbackup:1 #, c-format msgid "July" msgstr "칠월" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Prints into %s" msgstr ", %s에 인쇄" #: ../../install_steps_interactive.pm:1 #, c-format msgid "An error occurred" msgstr "오류 발생" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "이 팩키지는 반드시 업그레이드되어야 합니다.\n" "정말로 선택을 해제하시겠습니까?" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Tamil (Typewriter-layout)" msgstr "미국 (타자기)" #: ../../security/help.pm:1 #, c-format msgid "Use password to authenticate users." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "manual" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Filename text to search for:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model, driver" msgstr "프린터 제조업체, 모델, 드라이버" #: ../../standalone/drakfloppy:1 #, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" "%s 장치에 매체가 없거나, 쓰기금지되어 있습니다.\n" "매체를 넣어 주세요." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "디렉토리 %s에는 이미 데이터가 있습니다.\n" "(%s)" #: ../../printer/main.pm:1 #, c-format msgid "Printer on NetWare server" msgstr "네트웨어 서버상의 프린터" #: ../../any.pm:1 #, c-format msgid "Give the ram size in MB" msgstr "메모리 용량를 MB로 입력하세요" #: ../../standalone/drakbackup:1 #, c-format msgid "Friday" msgstr "금요일" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Disconnection from Internet complete." msgstr "인터넷에 연결" #: ../../any.pm:1 #, c-format msgid "Real name" msgstr "실제 이름" #: ../../standalone/drakfont:1 #, c-format msgid "done" msgstr "완료" #: ../../standalone/drakbackup:1 #, c-format msgid "Please uncheck or remove it on next time." msgstr "다음 번에는 그것을 선택 해제 또는 제거하세요." #: ../../security/level.pm:1 #, c-format msgid "Higher" msgstr "더 높음" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the partitions you want to format" msgstr "포맷할 파티션을 선택하세요" #: ../../standalone/drakxtv:1 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Can't find %s on %s" msgstr "%s를 열 수 없습니다: %s\n" #: ../../keyboard.pm:1 #, c-format msgid "Japanese 106 keys" msgstr "일본 106키" #: ../../standalone/scannerdrake:1 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "This will take a few minutes." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Burkina Faso" msgstr "부르키나 파소" #: ../../standalone/drakbackup:1 #, c-format msgid "June" msgstr "유월" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use scanners on remote computers" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Delete selected rule" msgstr "선택된 규칙 삭제" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Accessing printers on remote CUPS servers" msgstr "원격 CUPS 서버의 프린터" #: ../../any.pm:1 #, c-format msgid "Insert a floppy in %s" msgstr "%s에 프로피를 넣으세요." #: ../../lang.pm:1 #, c-format msgid "Maldives" msgstr "몰디브" #: ../../any.pm:1 #, c-format msgid "compact" msgstr "콤팩트 모드" #: ../../common.pm:1 #, c-format msgid "1 minute" msgstr "1 분" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "type: fat" msgstr "유형: " #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "on channel %d id %d\n" msgstr "%d 버스상에서 ID %d\n" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Laos" msgstr "라오스" #: ../../share/advertising/04-configuration.pl:1 #, c-format msgid "" "Mandrake Linux 9.2 provides you with the Mandrake Control Center, a powerful " "tool to fully adapt your computer to the use you make of it. Configure and " "customize elements such as the security level, the peripherals (screen, " "mouse, keyboard...), the Internet connection and much more!" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Activate/Disable ethernet cards promiscuity check." msgstr "" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "" "loopback로 사용하거나 크기를 조정할 FAT 파티션이 없습니다. (또는 디스크 공간" "이 부족합니다.)" #: ../../standalone/drakperm:1 #, c-format msgid "Up" msgstr "위로" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Firewall" msgstr "방화벽/라우터" #: ../../standalone/drakxtv:1 #, c-format msgid "Area:" msgstr "지역 :" #: ../../harddrake/data.pm:1 #, c-format msgid "(E)IDE/ATA controllers" msgstr "" #: ../../fs.pm:1 #, c-format msgid "All I/O to the file system should be done synchronously." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer Server" msgstr "프린터 서버" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Custom configuration" msgstr "경고 설정" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the installation image will be available.\n" "\n" "If you do not have an existing directory, please copy the CD or DVD " "contents.\n" "\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Saint Pierre and Miquelon" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "September" msgstr "구월" #: ../../standalone/draksplash:1 #, c-format msgid "saving Bootsplash theme..." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Portugal" msgstr "포르투갈" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have another one?" msgstr "또 다른것이 설치되어 있습니까?" #: ../../printer/main.pm:1 #, c-format msgid ", printing to %s" msgstr ", %s에 인쇄" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "Assign host name from DHCP address" msgstr "호스트 이름 또는 IP를 입력하세요." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to normal mode" msgstr "일반 모드로 전환" #: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Generic" msgstr "일반 마우스" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Cylinder %d to %d\n" msgstr "실린더 %d에서 %d까지\n" #: ../../standalone/drakbug:1 #, c-format msgid "YOUR TEXT HERE" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "New profile..." msgstr "새 프로파일..." #: ../../modules/interactive.pm:1 ../../standalone/draksec:1 #, c-format msgid "NONE" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which disk do you want to move it to?" msgstr "어떤 디스크를 이동하고 싶으십니까?" #: ../../standalone/draksplash:1 #, c-format msgid "Display logo on Console" msgstr "콘솔하상에 로고 보이기" #: ../../any.pm:1 #, c-format msgid "Windows Domain" msgstr "윈도우즈 도메인" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Saami (norwegian)" msgstr "드보락(노르웨이)" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Interface %s (on network %s)" msgstr "인터페이스 %s (%s 모듈 사용)" #: ../../standalone/drakbackup:1 #, c-format msgid "INFO" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Wallis and Futuna" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Is FPU present" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" "죄송합니다.\n" "이 서비스에 대한 추가정보가 없습니다." #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Single NIC -->" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Marshall Islands" msgstr "마샬 제도" #: ../../ugtk2.pm:1 #, c-format msgid "Is this correct?" msgstr "이것이 맞습니까?" #: ../../standalone/drakbackup:1 #, c-format msgid "Windows (FAT32)" msgstr "윈도우즈(FAT32)" #: ../../steps.pm:1 #, fuzzy, c-format msgid "Root password" msgstr "암호 없음" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build All Kernels -->" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "DVDRAM device" msgstr "장치" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report unowned files." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "Version: %s\n" "Author: Thierry Vignaud <tvignaud" "\\@mandrakesoft.com>\n" "\n" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "" "You don't have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "스왑 파티션이 없습니다.\n" "\n" "계속 진행합니까?" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "Version: " msgstr "버젼: %s\n" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Server IP missing!" msgstr "NCP 서버 이름을 찾을 수 없음!" #: ../../lang.pm:1 #, c-format msgid "Suriname" msgstr "수리남" #: ../../network/adsl.pm:1 #, fuzzy, c-format msgid "Use a floppy" msgstr "플로피에 저장" #: ../../any.pm:1 #, fuzzy, c-format msgid "Enable ACPI" msgstr "CD 부팅 허용?" #: ../../fs.pm:1 #, c-format msgid "Give write access to ordinary users" msgstr "" #: ../../help.pm:1 #, c-format msgid "Graphical Environment" msgstr "그래픽 환경" #: ../../lang.pm:1 #, c-format msgid "Gibraltar" msgstr "지브롤터" #: ../../network/modem.pm:1 #, fuzzy, c-format msgid "Do nothing" msgstr "제외할 문자열" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Delete Client" msgstr "<-- 클라이언트 삭제" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Filesystem type: " msgstr "파일시스템 유형: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Starting network..." msgstr "네트웍 연결 중..." #: ../../lang.pm:1 #, fuzzy, c-format msgid "Vietnam" msgstr "베트남" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/_Fields description" msgstr "설명" #: ../../share/advertising/10-security.pl:1 #, c-format msgid "Optimize your security by using Mandrake Linux" msgstr "보안 최적화" #: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 #: ../../standalone/drakconnect:1 ../../standalone/drakfont:1 #: ../../standalone/drakperm:1 ../../standalone/draksec:1 #: ../../standalone/harddrake2:1 #, c-format msgid "Help" msgstr "도움말" #: ../../security/l10n.pm:1 #, c-format msgid "Check if the network devices are in promiscuous mode" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Your personal phone number" msgstr "님의 개인 전화 번호" #: ../../install_interactive.pm:1 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "윈도우즈용으로 어느 용량을 유지하시겠습니까?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" "시험 인쇄 페이지를 프린터로 보냈습니다.\n" "인쇄되기까지 약간의 시간이 걸릴 수 있습니다.\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Username required" msgstr "사용자명이 필요합니다." #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "Device" msgstr "장치: " #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Depending on the default language you chose in Section , DrakX will\n" "automatically select a particular type of keyboard configuration. However,\n" "you may not have a keyboard that corresponds exactly to your language: for\n" "example, if you are an English speaking Swiss person, you may have a Swiss\n" "keyboard. Or if you speak English but are located in Quebec, you may find\n" "yourself in the same situation where your native language and keyboard do\n" "not match. In either case, this installation step will allow you to select\n" "an appropriate keyboard from a list.\n" "\n" "Click on the \"%s\" button to be presented with the complete list of\n" "supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding that will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" "일반적으로, 드레이크X는 (선택한 언어에 기반하여) 올바른 키보드를\n" "자동으로 선택합니다. 그러나 사용하는 언어에 정확히 일치하는 키보드를\n" "가지고 있지 않은 경우도 있을 수 있습니다: 가령, 영어를 사용하는 스위스인은\n" "여전히 스위스 키보드를 원할 수도 있습니다. 또한 영어를 사용하지만, 캐나다 퀘" "벡주에\n" "살고 있다면 또한 이러한 경우가 될 것입니다. 이와 같은 경우라면, 이 단계에서\n" "적당한 키보드를 목록에서 선택해야 합니다.\n" "\n" "지원되는 모든 키보드 목록을 보려면, 「추가정보」를\n" "누르세요." #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "SMB (Windows 9x/NT) 프린터 옵션" #: ../../printer/main.pm:1 #, c-format msgid "URI: %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Valid user list changed, rewriting config file." msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "mkinitrd optional arguments" msgstr "mkinitrd의 기타 인자" #: ../../share/advertising/03-software.pl:1 #, c-format msgid "" "Surf the Web with Mozilla or Konqueror, read your mail with Evolution or " "Kmail, create your documents with OpenOffice.org." msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "Protocol for the rest of the world" msgstr "다른 지역을 위한 프로토콜" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print test pages" msgstr "시험 페이지 인쇄" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Activate now" msgstr "지금 활성화" #: ../../Xconfig/card.pm:1 #, c-format msgid "64 MB or more" msgstr "16 MB 이상" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" "인쇄할 시험 페이지를 선택하세요.\n" "주의: 사진 시험 페이지를 인쇄하기 위해서는 다소 시간이 걸릴 수 있습니다.\n" "그리고 저용량의 메모리를 가진 레이저 프린터에서는\n" "페이지가 나오지 않을 수도 있습니다.\n" "표준 시험 페이지는 대개 잘 인쇄됩니다." #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Please select the device where your %s is attached" msgstr "백업 파일들이 저장될 디렉토리를 입력하세요." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Not formatted\n" msgstr "포맷 안되었음\n" #: ../../standalone/draksec:1 #, c-format msgid "Periodic Checks" msgstr "" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "PXE Server Configuration" msgstr "고급 설정" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup the system files before:" msgstr "시스템 파일 먼저 백업:" #: ../../security/level.pm:1 #, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "이 등급은 클라이언트로서 인터넷에 접속하는데 적당한 표준 보안등급입니다." #: ../../any.pm:1 #, c-format msgid "First floppy drive" msgstr "첫번째 플로피 드라이브" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Quit" msgstr "/파일(F)/종료(_Q)" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak" msgstr "드보락" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose the new size" msgstr "새로운 크기를 선택해 주세요" #: ../../standalone/harddrake2:1 #, c-format msgid "Media class" msgstr "매체 범주" #: ../../standalone/XFdrake:1 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not known by this version of Scannerdrake." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Faroe Islands" msgstr "패로 제도" #: ../../standalone/drakfont:1 #, c-format msgid "Restart XFS" msgstr "XFS 재시작" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add host/network" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scannerdrake will not be started now." msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Model name" msgstr "모듈 이름" #: ../../lang.pm:1 #, c-format msgid "Albania" msgstr "알바니아" #: ../../lang.pm:1 #, c-format msgid "British Indian Ocean Territory" msgstr "영국령 인도양 자치구역" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Normal Mode" msgstr "일반 모드" #: ../../standalone/drakbackup:1 #, c-format msgid "No CD-R/DVD-R in drive!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer connection type" msgstr "인터넷 연결 유형" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "No network adapter on your system!" msgstr "네트웍 어댑터를 찾을 수 없습니다!" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Network %s" msgstr "네트웍" #: ../../keyboard.pm:1 #, c-format msgid "Malayalam" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s out of range!" msgstr "%s 옵션 범위 초과!" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connect %s" msgstr "연결" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Restarting CUPS..." msgstr "XFS 재시작" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "프린터「%s」상에서 인쇄 중" #: ../../install_steps.pm:1 #, c-format msgid "Duplicate mount point %s" msgstr "마운트 포인트 중복 %s" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Connection Configuration" msgstr "연결 설정" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|Generic" msgstr "알 수 없음|일반" #: ../../help.pm:1 #, c-format msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Bugs may have been\n" "fixed, security issues resolved. To allow you to benefit from these\n" "updates, you are now able to download them from the Internet. Check \"%s\"\n" "if you have a working Internet connection, or \"%s\" if you prefer to\n" "install updated packages later.\n" "\n" "Choosing \"%s\" will display a list of places from which updates can be\n" "retrieved. You should choose one nearer to you. A package-selection tree\n" "will appear: review the selection, and press \"%s\" to retrieve and install\n" "the selected package(s), or \"%s\" to abort." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Myanmar" msgstr "미얀마" #: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1 #: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/draksplash:1 ../../standalone/harddrake2:1 #: ../../standalone/logdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "Quit" msgstr "종료" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Auto allocate" msgstr "자동 할당" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Check bad blocks?" msgstr "배드 블럭 검사를 합니까?" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Other MultiMedia devices" msgstr "다른 매체" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "burner" msgstr "프린터" #: ../../standalone/drakbug:1 #, c-format msgid "Bug Description/System Information" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid " (Default is all users)" msgstr "기본 프린터" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "No remote machines" msgstr "(이 서버상의)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: ../../any.pm:1 #, c-format msgid "Authentication NIS" msgstr "인증 NIS" #: ../../any.pm:1 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "옵션: 「명령행 옵션제한」은 암호없이 사용될수 없습니다." #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently enabled" msgstr "현재 인터넷 연결 공유가 가능한 상태입니다." #: ../../lang.pm:1 #, c-format msgid "United Arab Emirates" msgstr "아랍 에미리트 연합" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_0" msgstr "카드 IO_0" #: ../../standalone/drakTermServ:1 #, c-format msgid "Disable Local Config" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Thailand" msgstr "태국" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_1" msgstr "카드 IO_1" #: ../../standalone/printerdrake:1 #, c-format msgid "Search:" msgstr "검색:" #: ../../lang.pm:1 #, c-format msgid "Kazakhstan" msgstr "카자흐스탄" #: ../../standalone/drakTermServ:1 #, c-format msgid "Routers:" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Write" msgstr "%s 기록" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Display all available remote CUPS printers" msgstr "프린터 목록 갱신" #: ../../install_steps_newt.pm:1 #, c-format msgid "Mandrake Linux Installation %s" msgstr "리눅스-맨드레이크 설치 %s" #: ../../harddrake/sound.pm:1 #, c-format msgid "Unknown driver" msgstr "알 수 없는 드라이버" #: ../../keyboard.pm:1 #, c-format msgid "Thai keyboard" msgstr "태국" #: ../../lang.pm:1 #, c-format msgid "Bouvet Island" msgstr "" #: ../../network/modem.pm:1 #, c-format msgid "Dialup options" msgstr "다이얼업 옵션" #: ../../printer/printerdrake.pm:1 #, c-format msgid "If no port is given, 631 will be taken as default." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Per client system configuration files:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tclients can customize files such as /etc/modules.conf, /etc/" "sysconfig/mouse, \n" " \t/etc/sysconfig/keyboard on a per-client basis.\n" "\n" " Note: Enabling local client hardware configuration does enable root " "login to the terminal \n" " server on each client machine that has this feature enabled. Local " "configuration can be\n" " turned back off, retaining the configuration files, once the client " "machine is configured." msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "CDROM을 바꿔 주세요!\n" "\n" "「%s」라고 쓰여진 CDROM을 드라이브에 넣은 후, 「확인」을 눌러 주세요.\n" "만약 CDROM을 가지고 있지 않다면, 「취소」를 눌러 추가 설치를 취소하세요." #: ../../keyboard.pm:1 #, c-format msgid "Polish" msgstr "폴란드" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Online" msgstr "맨드레이크 온라인" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by webdav.\n" msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid ", multi-function device on a parallel port" msgstr "프린터 호스트명 또는 IP" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "어떠한 네트웍 어댑터도 발견되지 않습니다. 하드웨어 설정 도구를 실행해 보세요." #: ../../network/network.pm:1 ../../standalone/drakconnect:1 #: ../../standalone/drakgw:1 #, c-format msgid "Netmask" msgstr "넷마스크" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "No hard drives found" msgstr "하드 디스크를 찾을 수 없습니다." #: ../../mouse.pm:1 #, c-format msgid "2 buttons" msgstr "2 버튼" #: ../../mouse.pm:1 #, c-format msgid "Logitech CC Series" msgstr "로지텍 CC 시리즈" #: ../../network/isdn.pm:1 #, c-format msgid "What kind is your ISDN connection?" msgstr "어떤 종류의 ISDN 연결을 사용합니까?" #: ../../any.pm:1 #, c-format msgid "Label" msgstr "항목명" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Save on floppy" msgstr "플로피에 저장" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Check open ports" msgstr "%s 포트에서 발견" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Edit selected printer" msgstr "%s 발견" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer auto-detection" msgstr "프린터 자동 검색" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "Which of the following is your ISDN card?" msgstr "어느 것이 님의 ISDN 카드입니까?" #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS는 TCP/IP 네트웍으로 파일을 공유하는 인기있는 프로토콜입니다.\n" "이 서비스는 /etc/export 파일을 설정함으로써 NFS 서버의 기능을 가능하게\n" "합니다." #: ../../standalone/drakbug:1 #, c-format msgid "Msec" msgstr "기타" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Number of capture buffers:" msgstr "캡쳐 버퍼 수:" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "님의 선택은? (0/1 기본값 「%s」) " #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a file system).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "it.\n" "\n" "Click on \"%s\" when you are ready to format partitions.\n" "\n" "Click on \"%s\" if you want to choose another partition for your new\n" "Mandrake Linux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions that will be checked for\n" "bad blocks on the disk." msgstr "" "새로 만들어진 파티션들은 포맷되어져야 합니다.\n" "(포맷이라 함은 파일 시스템을 만든다는 의미입니다.)\n" "\n" "지금 기존의 데이터를 삭제하기 위해서 기존 파티션들을\n" "다시 포맷할 수도 있습니다. 그렇게 하고 싶다면, 해당 파티션들도\n" "선택하세요.\n" "\n" "주의: 모든 기존 파티션들을 다시 포맷할 필요는 없습니다.\n" "(「/」,「/usr」,「/var」와 같은) 운영체제를 담고 있는 파티션들은\n" "다시 포맷하더라도, (「/home」과 같은) 데이터를 단고 있는 파티션들은\n" ", 기존 데이터를 보존하고 싶을 경우, 다시 포맷할 필요가 없습니다.\n" "\n" "파티션들을 선택할 때 주의하세요. 일단 포팩이 되고나면,\n" "선택됐던 파티션상에 존재했던 모든 데이터는 삭제되며,\n" "복구가 불가능해 집니다.\n" "\n" "포맷할 준비가 되었으면, 「확인」을 누르세요.\n" "\n" "맨드레이크 리눅스 설치용 파티션을 다시 선택하고 싶다면,\n" "「취소」를 누르세요.\n" "\n" "디스크상의 손상된 블럭을 체크하며 포맷하고 싶다면,\n" "「고급」을 누르세요." #: ../../keyboard.pm:1 #, c-format msgid "French" msgstr "프랑스" #: ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTY)" msgstr "체코 (QWERTY)" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Allow X Window connections" msgstr "일반 모뎀 연결" #: ../../standalone/service_harddrake:1 #, fuzzy, c-format msgid "Hardware probing in progress" msgstr "검색 진행 중" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Net Device" msgstr "Xinetd 서비스" #: ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, c-format msgid "Summary" msgstr "요약설명" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" #: ../../network/netconnect.pm:1 ../../network/tools.pm:1 #, c-format msgid "Next" msgstr "다음" #: ../../bootloader.pm:1 #, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "「%s」파티션에 부트로더를 설치할 수 없습니다.\n" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "CHAP" msgstr "CHAP" #: ../../lang.pm:1 #, c-format msgid "Puerto Rico" msgstr "푸에르토리코" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "(bootp/dhcp/zeroconf)" msgstr "(BOOTP/DHCP)" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "package 'ImageMagick' is required to be able to complete configuration.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"number row\" QWERTY" msgstr "리투아니아 (숫자열 QWERTY)" #: ../../install_any.pm:1 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Anguilla" msgstr "" #: ../../any.pm:1 #, c-format msgid "NIS Domain" msgstr "NIS 도메인" #: ../../lang.pm:1 #, c-format msgid "Antarctica" msgstr "남극" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- User Files:\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Mount options" msgstr "마운트 옵션들:" #: ../../lang.pm:1 #, c-format msgid "Jamaica" msgstr "자메이카" #: ../../services.pm:1 #, fuzzy, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" "오라클 같은 프로그램을 사용하기 위해 날(RAW) 장치를\n" "(하드디스크 파티션 같은) 블록 장치로 할당." #: ../../install_steps_gtk.pm:1 #, c-format msgid "Please wait, preparing installation..." msgstr "설치 준비중입니다. 잠시 기다리세요." #: ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTZ)" msgstr "체코 (QWERTZ)" #: ../../network/network.pm:1 #, c-format msgid "Track network card id (useful for laptops)" msgstr "네트웍카드 ID 추적 (랩탑에 유용함)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The port number should be an integer!" msgstr "포트 번호는 정수이어야 합니다!" #: ../../standalone/draksplash:1 #, c-format msgid "You must choose an image file first!" msgstr "먼저 이미지 파일을 선택해야 합니다!" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore from Hard Disk." msgstr "하드 디스크에서 복구" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Add to LVM" msgstr "LVM에 추가" #: ../../network/network.pm:1 #, c-format msgid "DNS server" msgstr "DNS 서버" #: ../../lang.pm:1 #, c-format msgid "Trinidad and Tobago" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "LPD and LPRng do not support IPP printers.\n" msgstr "LPD와 LPRng는 IPP 프린터를 지원하지 않습니다.\n" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Host name or IP." msgstr "호스트명:" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "/_Edit" msgstr "편집" #: ../../fsedit.pm:1 #, c-format msgid "simple" msgstr "단순화" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Clear all" msgstr "모두 삭제" #: ../../printer/printerdrake.pm:1 #, c-format msgid "No test pages" msgstr "시험 페이지 없음" #: ../../lang.pm:1 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Adapter %s: %s" msgstr "어댑터 %s: %s" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "Boot disk creation" msgstr "부트 디스크 생성" #: ../../standalone/drakbackup:1 #, c-format msgid "Monday" msgstr "월요일" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Unknown model" msgstr "알 수없는 모델" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "authentication" msgstr "사용자 인증" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Now" msgstr "지금 백업" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "/_File" msgstr "/파일(_F)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing printer from Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" "2.2 커널 시리즈용 패킷 필터를 실행, 네트웍 공격으로부터\n" "컴퓨터를 보호하는 방화벽을 구축합니다." #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Editable" msgstr "해제" #: ../../network/ethernet.pm:1 #, fuzzy, c-format msgid "Which dhcp client do you want to use ? (default is dhcp-client)" msgstr "" "어떤 dhcp 클라이언트를 사용하겠습니까?\n" "dhcp-client가 기본값입니다." #: ../../keyboard.pm:1 #, c-format msgid "Tamil (ISCII-layout)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Mayotte" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "%d KB\n" msgstr "크기: %d KB\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Creating auto install floppy..." msgstr "자동 설치 플로피 디스크 생성 중" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Searching for scanners ..." msgstr "유효한 프린터들" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Russia" msgstr "러시아" #: ../../steps.pm:1 #, fuzzy, c-format msgid "Partitioning" msgstr "인쇄" #: ../../network/netconnect.pm:1 #, c-format msgid "ethernet card(s) detected" msgstr "이더넷 카드 발견" #: ../../standalone/logdrake:1 #, c-format msgid "Syslog" msgstr "시스템 로그" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't create catalog!" msgstr "" #: ../../share/advertising/11-mnf.pl:1 #, c-format msgid "" "Complete your security setup with this very easy-to-use software which " "combines high performance components such as a firewall, a virtual private " "network (VPN) server and client, an intrusion detection system and a traffic " "manager." msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "Not enough free space for auto-allocating" msgstr "자동할당하기에는 공간이 합니다." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Set root password" msgstr "root 암호 설정" #: ../../security/l10n.pm:1 #, c-format msgid "Enable IP spoofing protection" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Group :" msgstr "그룹:" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "%s 파티션의 크기를 변경하면, 모든 데이타를 잃게됩니다." #: ../../standalone/drakconnect:1 #, c-format msgid "Internet connection configuration" msgstr "인터넷 연결 설정" #: ../../security/help.pm:1 #, c-format msgid "Add the name as an exception to the handling of password aging by msec." msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels" msgstr "TV 채널 검색 중..." #: ../../standalone/drakbug:1 #, c-format msgid "Kernel:" msgstr "커널:" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "/_About..." msgstr "/정보(_A)..." #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Bengali" msgstr "허용" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Preference: " msgstr "사용자 정의" # #msgid "Services: %d activated for %d registered" # #msgstr "서비스: 등록된 %2$d 중 %1$d 활성화됨" #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #, fuzzy, c-format msgid "Services: %d activated for %d registered" msgstr "서비스: 등록된 %2$d 중 %1$d 활성화됨" #: ../../any.pm:1 #, c-format msgid "Create a bootdisk" msgstr "부트디스크 제작" #: ../../lang.pm:1 #, c-format msgid "Solomon Islands" msgstr "솔로몬 제도" #: ../../standalone/mousedrake:1 #, fuzzy, c-format msgid "Please test your mouse:" msgstr "마우스를 테스트하세요." #: ../../modules/interactive.pm:1 #, c-format msgid "(module %s)" msgstr "(%s 모듈 사용)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Workgroup" msgstr "작업 그룹" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer host name or IP" msgstr "프린터 호스트명 또는 IP" #: ../../standalone/drakbackup:1 #, c-format msgid "Host Path or Module" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "프린터 이름에는 문자, 숫자 그리고 밑줄(Underscore)만 있어야 합니다." #: ../../standalone/drakgw:1 #, c-format msgid "Show current interface configuration" msgstr "현재 인터페이스 설정 보기" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Add Printer" msgstr "프린터" #: ../../security/help.pm:1 #, c-format msgid "" "The argument specifies if clients are authorized to connect\n" "to the X server from the network on the tcp port 6000 or not." msgstr "" #: ../../help.pm:1 #, c-format msgid "Development" msgstr "개발" #: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/scannerdrake:1 #, c-format msgid "Done" msgstr "완료" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Web Server" msgstr "웹 서버" #: ../../lang.pm:1 #, c-format msgid "Chile" msgstr "칠레" #: ../../standalone/drakbackup:1 #, c-format msgid "\tDo not include System Files\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" #: ../../any.pm:1 #, c-format msgid "(already added %s)" msgstr "(이미 %s는(은) 추가되었습니다.)" #: ../../any.pm:1 #, fuzzy, c-format msgid "Bootloader installation in progress" msgstr "부트로더 설치" #: ../../printer/main.pm:1 #, c-format msgid ", using command %s" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Flags" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add/Del Users" msgstr "사용자 추가/제거" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Host/network IP address missing." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "weekly" msgstr "매주" #: ../../standalone/logdrake:1 ../../standalone/net_monitor:1 #, c-format msgid "Settings" msgstr "설정값" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The entered host/network IP is not correct.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Create/Transfer backup keys for SSH" msgstr "" #: ../../any.pm:1 #, fuzzy, c-format msgid "Here is the full list of available countries" msgstr "지원되는 키보드 목록이 여기에 있습니다." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Alternative test page (A4)" msgstr "시험 페이지 활성화 (A4)" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "만약 아래에 열거된 모든 CD를 가지고 있다면, 「확인」을, \n" "전혀 가지고 있지 않다면, 「취소」를, \n" "일부만 가지고 있다면, 없는 CD를 선택해제한 후에 「확인」을 누르세요." #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Wait please" msgstr "기다려 주세요." #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "PAP" msgstr "PAP" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup user files" msgstr "사용자 파일 백업" #: ../../diskdrake/dav.pm:1 #, c-format msgid "New" msgstr "새로 만들기" #: ../../help.pm:1 #, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you have to enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only user authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That is why you must choose a password that is difficult to\n" "guess - DrakX will tell you if the password that you chose too easy. As you\n" "can see, you are not forced to enter a password, but we strongly advise you\n" "against this. GNU/Linux is just as prone to operator error as any other\n" "operating system. Since \"root\" can overcome all limitations and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves, it is important that it be difficult to become\n" "\"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it far\n" "too easy to compromise a system.\n" "\n" "One caveat -- do not make the password too long or complicated because you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it in. To reduce\n" "the chance of a blind typing error you will need to enter the password\n" "twice. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will be the one you will have use the first time you\n" "connect.\n" "\n" "If you wish access to this computer to be controlled by an authentication\n" "server, click the \"%s\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one for \"%s\". If you do not know which\n" "one to use, you should ask your network administrator.\n" "\n" "If you happen to have problems with remembering passwords, if your computer\n" "will never be connected to the internet or that you absolutely trust\n" "everybody who uses your computer, you can choose to have \"%s\"." msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Name resolution spoofing protection" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "At this point, DrakX will allow you to choose the security level desired\n" "for the machine. As a rule of thumb, the security level should be set\n" "higher if the machine will contain crucial data, or if it will be a machine\n" "directly exposed to the Internet. The trade-off of a higher security level\n" "is generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, stay with the default option." msgstr "" "이제 컴퓨터의 보안 수준을 선택할 단계입니다.\n" "자유로운 사용을 위해서는 컴퓨터가 보다 더 많이 개방되어져야 하며,\n" "저장된 데이터의 중요성이 크면 클수록, 더 높은 보안 수준이 유지되어야 합니" "다.\n" "그러나 일반적으로 보다 높은 보안 수준은 보다 많은 사용상의 불편함을 감수해야" "만\n" "이루어질 수 있음을 유념하세요. 각 보안 수준이 의미하는 바에 대한 자세한 정보" "를\n" "알고 싶다면 「사용자 지침서」의 MSEC 장을 참조하세요.\n" "\n" "어느 것을 선택해야 할지 잘 모르겠다면, 기본값을 유지하세요." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Load from floppy" msgstr "플로피에서 읽기" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "The following printer was auto-detected. " msgstr "다음 팩키지들이 제거될 것입니다." #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Uses command %s" msgstr "포트" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot Floppy" msgstr "부트 플로피" #: ../../keyboard.pm:1 #, c-format msgid "Norwegian" msgstr "노르웨이" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Searching for new scanners ..." msgstr "유효한 프린터들" #: ../../standalone/logdrake:1 #, c-format msgid "Apache World Wide Web Server" msgstr "아파치 월드와이드웹 서버" #: ../../standalone/harddrake2:1 #, c-format msgid "stepping of the cpu (sub model (generation) number)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "select path to restore (instead of /)" msgstr "([/] 대신에) 복구 경로 선택" #: ../../standalone/draksplash:1 #, c-format msgid "Configure bootsplash picture" msgstr "부트스플래쉬 그림 설정" #: ../../lang.pm:1 #, c-format msgid "Georgia" msgstr "조지아" #: ../../lang.pm:1 #, c-format msgid "China" msgstr "중국" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid " (Make sure that all your printers are connected and turned on).\n" msgstr "프린터가 연결된 포트를 선택하세요." #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Reading data of installed printers..." msgstr "유효한 프린터들" #: ../../standalone/drakbackup:1 #, c-format msgid " Erase Now " msgstr " 지금 삭제" #: ../../fsedit.pm:1 #, c-format msgid "server" msgstr "서버" #: ../../install_any.pm:1 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "플로피 디스크를 %s 드라이브에 넣으세요" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "" #: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Please Wait... Applying the configuration" msgstr "기다려 주세요... 설정을 적용하고 있습니다." # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Welcome to GRUB the operating system chooser!" msgstr "반갑습니다. 운영체제 선택기, 그럽입니다." #: ../../bootloader.pm:1 #, c-format msgid "Grub" msgstr "Grub" #: ../../harddrake/data.pm:1 #, c-format msgid "SCSI controllers" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr "" #: ../../standalone/drakedm:1 #, c-format msgid "Choosing a display manager" msgstr "" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, fuzzy, c-format msgid "Zeroconf Host name" msgstr "호스트명:" #: ../../standalone/drakbackup:1 #, c-format msgid "Custom setup/crontab entry:" msgstr "" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "IP 주소는 1.2.3.4과 같은 형식이어야 합니다." #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Configure CUPS printing system" msgstr "인쇄시스템 변경" #: ../../lang.pm:1 #, c-format msgid "Ecuador" msgstr "에콰도르" #: ../../standalone/drakautoinst:1 #, c-format msgid "Add an item" msgstr "항목 추가" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printers on this machine are available to other computers" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "I can't find needed image file `%s'." msgstr "필요한 이미지 파일 %s를 찾을 수 없습니다." #: ../../install_steps_interactive.pm:1 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535." msgstr "" #: ../../any.pm:1 #, c-format msgid "Shell" msgstr "명령 해석기" #: ../../lang.pm:1 #, c-format msgid "Sao Tome and Principe" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "PCI" msgstr "PCI" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Can't login using username %s (bad password?)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Azerbaidjani (latin)" msgstr "Azerbaidjani (라틴)" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Package not installed" msgstr "설치되지 않았습니다." #: ../../lang.pm:1 #, c-format msgid "American Samoa" msgstr "미국령 사모아" #: ../../share/advertising/12-mdkexpert.pl:1 #, c-format msgid "Become a MandrakeExpert" msgstr "맨드레이크 전문가가 되세요." #: ../../standalone/drakconnect:1 #, c-format msgid "Protocol" msgstr "프로토콜" #: ../../standalone/drakfont:1 #, c-format msgid "Copy fonts on your system" msgstr "시스템 폰트 복사" #: ../../standalone/harddrake2:1 #, c-format msgid "Harddrake help" msgstr "하드 드레이크 도움말" #: ../../standalone/harddrake2:1 #, c-format msgid "Bogomips" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Mandrake Terminal Server Configuration" msgstr "맨드레이크 터미널 서버 설정" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore all backups" msgstr "모든 백업 복구" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " on parallel port #%s" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check open ports." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to erase the media." msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't select/unselect this package" msgstr "이 팩키지를 선택/버림 할수 없습니다." #: ../../keyboard.pm:1 ../../diskdrake/interactive.pm:1 #: ../../harddrake/sound.pm:1 ../../network/modem.pm:1 #: ../../standalone/drakfloppy:1 #, c-format msgid "Warning" msgstr "경고" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Other Files:\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote host name" msgstr "원격 호스트명" #: ../../any.pm:1 #, c-format msgid "access to X programs" msgstr "X 프로그램 액세스" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "Computing the size of the Windows partition" msgstr "윈도우즈 파티션의 빈 공간 사용하세요." #: ../../standalone/printerdrake:1 #, c-format msgid "/_Refresh" msgstr "" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #: ../../standalone/drakxtv:1 #, c-format msgid "Italy" msgstr "이탈리아" #: ../../lang.pm:1 #, c-format msgid "Cayman Islands" msgstr "케이만 제도" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer" msgstr "프린터 이름" #: ../../standalone/drakgw:1 #, c-format msgid "disable" msgstr "해제" #: ../../fs.pm:1 ../../partition_table.pm:1 #, c-format msgid "error unmounting %s: %s" msgstr "%s를 언마운트중 오류발생: %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do it!" msgstr "실행" #: ../../standalone/drakbackup:1 #, c-format msgid "%s not responding" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select model manually" msgstr "직접 모델 선택" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Format" msgstr "포맷" #: ../../network/adsl.pm:1 #, c-format msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" "ADSL 연결은 대개 PPPOE를 사용합니다. \n" "하지만, 어떤 경우에는 PPTP나, 극히 드물게는 DHCP도 사용됩니다.\n" "잘 모르겠다면, 「PPPOE 사용」을 선택하세요." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Various" msgstr "다양한" #: ../../harddrake/data.pm:1 #, c-format msgid "Zip" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Left Alt key" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Load setting" msgstr "설정 읽기" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please " "choose the correct model from the list." msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Set selected printer as the default printer" msgstr "이 프린터를 기본으로 설정" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" "\n" "전송하려는 프린터들을 선택한 후에 「전송」을 누르세요." #: ../../printer/data.pm:1 #, c-format msgid "PDQ" msgstr "PDQ" #: ../../keyboard.pm:1 #, c-format msgid "Albanian" msgstr "알바니아" #: ../../lang.pm:1 #, c-format msgid "Lithuania" msgstr "리투아니아" #: ../../any.pm:1 #, c-format msgid "Compact" msgstr "콤팩드 모드" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Detected model: %s %s" msgstr "검색된 모델: %s %s" #: ../../share/advertising/03-software.pl:1 #, c-format msgid "MandrakeSoft has selected the best software for you" msgstr "" #: ../../any.pm:1 #, c-format msgid "Local files" msgstr "지역 파일들" #: ../../pkgs.pm:1 #, c-format msgid "maybe" msgstr "괜찮은 팩키지" #: ../../lang.pm:1 #, c-format msgid "Panama" msgstr "파나마" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Can't open %s!" msgstr "%s를 열 수 없습니다: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" #: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Monitor" msgstr "모니터" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "65 thousand colors (16 bits)" msgstr "6만5천 색상 (16 bits)" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Remove fonts on your system" msgstr "시스템 폰트 제거" #: ../../standalone/drakgw:1 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphical interface at startup" msgstr "시작시 바로 X 실행" #: ../../network/netconnect.pm:1 #, c-format msgid " adsl" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "format of floppies supported by the drive" msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Firmware copy failed, file %s not found" msgstr "" #: ../../raid.pm:1 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "RAID 레벨 %d를 위한 파티션들이 충분하지 않습니다.\n" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "local config: true" msgstr "재설정" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it." msgstr "" "다음 프린터들이 설정되었습니다.\n" "수정하고 싶거나,\n" "정보를 보고 싶다면 프린터를 클릭하세요.\n" "새 프린터를 추가하고 싶다면 「프린터 추가」를 누르세요." #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Connected" msgstr "연결됨" #: ../../keyboard.pm:1 #, c-format msgid "Macedonian" msgstr "마케도니아" #: ../../lang.pm:1 #, c-format msgid "Mali" msgstr "말리" #: ../../harddrake/data.pm:1 #, c-format msgid "Bridges and system controllers" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Save" msgstr "/파일(F)/저장(_S)" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "No details" msgstr "상세설명" #: ../../pkgs.pm:1 #, c-format msgid "very nice" msgstr "훌륭한 팩키지" #: ../../standalone/draksplash:1 #, c-format msgid "Preview" msgstr "미리보기" #: ../../standalone/drakbug:1 #, c-format msgid "Remote Control" msgstr "원격 제어" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select media for backup..." msgstr "백업용 매체를 선택하세요..." #: ../../standalone/logdrake:1 #, c-format msgid "Wrong email" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "XFree86 server: %s\n" msgstr "XFree86 서버: %s\n" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Allow Thin Clients" msgstr "클라이언트 추가/제거" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Russian\" layout)" msgstr "그루지아(러시아어)" #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "/_Options" msgstr "/옵션(_O)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Your printer model" msgstr "프린터 모델" #: ../../any.pm:1 #, c-format msgid "" "\n" "\n" "(WARNING! You're using XFS for your root partition,\n" "creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" "because XFS needs a very large driver)." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "" "No CD or DVD image found, please copy the installation program and rpm files." msgstr "" #: ../../share/advertising/04-configuration.pl:1 #, fuzzy, c-format msgid "Mandrake's multipurpose configuration tool" msgstr "맨드레이크 터미널 서버 설정" #: ../../standalone/drakbackup:1 ../../standalone/logdrake:1 #, c-format msgid "Save" msgstr "저장" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "The %s is unsupported" msgstr "이 스캐너 [%s]는 지원되지 않습니다." #: ../../services.pm:1 #, c-format msgid "Load the drivers for your usb devices." msgstr "USB 장치용 드라이버 적재." #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Disk" msgstr "덴마크" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Enter a printer device URI" msgstr "프린터 장치 URI을 입력하세요." #: ../../share/advertising/01-thanks.pl:1 #, c-format msgid "" "The success of MandrakeSoft is based upon the principle of Free Software. " "Your new operating system is the result of collaborative work of the " "worldwide Linux Community." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Israel" msgstr "이스라엘" #: ../../lang.pm:1 #, c-format msgid "French Guiana" msgstr "프랑스령 기아나" #: ../../lang.pm:1 #, c-format msgid "default:LTR" msgstr "default:LTR" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "A command line must be entered!" msgstr "유효한 주소를 입력하세요!" #: ../../standalone/drakbackup:1 #, c-format msgid "Select user manually" msgstr "수동으로 사용자 선택" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transfer printer configuration" msgstr "프린터 설정 전송" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "부팅시에 연결하도록 하겠습니까?" #: ../../security/l10n.pm:1 #, c-format msgid "Check additions/removals of suid root files" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "%s (Port %s)" msgstr "포트" #: ../../standalone/drakbackup:1 #, c-format msgid "Use network connection to backup" msgstr "네트웍을 사용해 백업" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "Kernel version" msgstr "커널 버전" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "to make it simpler to manage the packages have been placed into groups of\n" "similar applications.\n" "\n" "Packages are sorted into groups corresponding to a particular use of your\n" "machine. Mandrake Linux has four predefined installations available. You\n" "can think of these installation classes as containers for various packages.\n" "You can mix and match applications from the various groups, so a\n" "``Workstation'' installation can still have applications from the\n" "``Development'' group installed.\n" "\n" " * \"%s\": if you plan to use your machine as a workstation, select one or\n" "more of the applications that are in the workstation group.\n" "\n" " * \"%s\": if plan on using your machine for programming, choose the\n" "appropriate packages from that group.\n" "\n" " * \"%s\": if your machine is intended to be a server, select which of the\n" "more common services you wish to install on your machine.\n" "\n" " * \"%s\": this is where you will choose your preferred graphical\n" "environment. At least one must be selected if you want to have a graphical\n" "interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you unselect all groups when performing a regular\n" "installation (as opposed to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"%s\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"%s\": installs the base system plus basic utilities and their\n" "documentation. This installation is suitable for setting up a server.\n" "\n" " * \"%s\": will install the absolute minimum number of packages necessary\n" "to get a working Linux system. With this installation you will only have a\n" "command line interface. The total size of this installation is about 65\n" "megabytes.\n" "\n" "You can check the \"%s\" box, which is useful if you are familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" "\n" "If you started the installation in \"%s\" mode, you can unselect all groups\n" "to avoid installing any new package. This is useful for repairing or\n" "updating an existing system." msgstr "" "이제 시스템상에 설치할 프로그램들을 지정할 차례입니다.\n" "맨드레이크 리눅스에는 설치할 수 있는 수천 개의 프로그램들이 있기 때문에\n" "사용자가 그것들을 모두 다 알지는 못할 것입니다.\n" "\n" "만약 표준 CD 설치를 수행하고 있는 중이라면, 현재 가지고 있는 CD들에 대해\n" "질문할 것입니다. 가지고 있는 CD들의 라벨을 확인하고 현재 님의 상황에 맞는\n" "선택 상자를 지정하세요. 계속할 준비가 되었으면, 「확인」을 누르세요.\n" "\n" "팩키지들은 용도에 따라 그룹으로 나열되어 있습니다.\n" "그룹들 자체는 또다시 네 개의 영역으로 나열되어 있습니다:\n" "\n" " ○ 「워크스테이션」: 시스템을 워크스테이션으로 사용할 계획이라면,\n" "하나 이상의 해당 그룹을 선택하세요.\n" "\n" " ○ 「개발」: 시스템을 프로그래밍의 용도로 사용하려 한다면, 원하는 그룹들" "을\n" "선택하세요.\n" "\n" " ○ 「서버」: 끝으로, 시스템이 서버되기를 원한다면, 여기서 대부분의 일반 서" "비스들이\n" "설치되도록 선택할 수 있습니다.\n" "\n" " ○ 「그래픽 환경」: 여기는 님이 선호하는 그래픽 환경을 선택하는 곳입니다.\n" "그래픽 환경 워크스테이션을 원한다면, 최소한 하나는 선택해야 합니다!\n" "\n" "마우스 포인터를 그룹 이름들 위로 올리면, 해당 그룹에 대한 작은 풍선 도움말" "을\n" "보여 줄 것입니다.\n" "\n" "「개별 팩키지 선택」옵션을 선택할 수도 있습니다.\n" "이 옵션은 님이 제공되어지는 팩키지들에 대해 잘 알고 있거나, 설치되는 팩키지들" "에 대한\n" "총체적인 제어를 원할 경우에 유용할 것입니다.\n" "\n" "만약 님이 「업데이트」모드로 설치를 시작했다면, 기존에 설치되지 않은 팩키지들" "이\n" "설치되는 것을 막기위해 모든 그룹을 선택해제할 수 있습니다. 이렇게 하는 것은\n" "기존 시스템을 업데이트하거나 고치기 위한 좋은 방법입니다." #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Accept user" msgstr "사용자 허가" #: ../../help.pm:1 ../../diskdrake/dav.pm:1 #, c-format msgid "Server" msgstr "서버" #: ../../keyboard.pm:1 #, c-format msgid "Left Shift key" msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid " local network" msgstr "C 클래스 지역 네트웍" #: ../../interactive/stdio.pm:1 #, c-format msgid "Bad choice, try again\n" msgstr "잘못된 선택입니다, 다시 하세요\n" #: ../../security/l10n.pm:1 #, c-format msgid "Syslog reports to console 12" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, fuzzy, c-format msgid "Search new servers" msgstr "서버 검색" #: ../../lang.pm:1 #, c-format msgid "Heard and McDonald Islands" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "No alternative driver" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to expert mode" msgstr "전문가 모드로 전환" #: ../../printer/cups.pm:1 #, c-format msgid "(on this machine)" msgstr "(이 서버상의)" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "IP 주소는 1.2.3.4과 같은 형식이어야 합니다." #: ../../network/modem.pm:1 #, c-format msgid "" "\"%s\" based winmodem detected, do you want to install needed software ?" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking at packages already installed..." msgstr "이미 설치된 팩키지 찾는 중..." #: ../../standalone/drakbackup:1 #, c-format msgid "Use Differential Backups" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Driver" msgstr "드라이버" #: ../../services.pm:1 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" "리눅스 설정(Linuxconf)은 시스템 설정을 유지하기 위하여\n" "부팅시에 다양한 작업 수행을 준비합니다." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "DVD-R device" msgstr "장치" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer on remote lpd server" msgstr "원격 LPD 서버의 프린터" #: ../../standalone/drakfont:1 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n" "boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n" "detected and installed in the bootloader menu. If this is not the case, you\n" "can add an entry by hand in this screen. Be careful to choose the correct\n" "parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt.\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information.\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second increments\n" "before your default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt.\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt.\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Wednesday" msgstr "수요일" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Germany" msgstr "독일" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Austria" msgstr "오스트리아" #: ../../mouse.pm:1 #, c-format msgid "No mouse" msgstr "마우스 없음" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Choose your CD/DVD media size (MB)" msgstr "CD/DVD 용량을 선택하세요." #: ../../security/l10n.pm:1 #, c-format msgid "Check permissions of files in the users' home" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "" #: ../../ugtk2.pm:1 #, c-format msgid "Collapse Tree" msgstr "트리 접기" #: ../../standalone/drakautoinst:1 #, c-format msgid "Auto Install Configurator" msgstr "자동 설치 설정기" #: ../../steps.pm:1 #, c-format msgid "Configure networking" msgstr "네트웍 설정" #: ../../any.pm:1 #, c-format msgid "Where do you want to install the bootloader?" msgstr "부트로더를 어디에 설치하고 싶으세요?" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Your choice of preferred language will affect the language of the\n" "documentation, the installer and the system in general. Select first the\n" "region you are located in, and then the language you speak.\n" "\n" "Clicking on the \"%s\" button will allow you to select other languages to\n" "be installed on your workstation, thereby installing the language-specific\n" "files for system documentation and applications. For example, if you will\n" "host users from Spain on your machine, select English as the default\n" "language in the tree view and \"%s\" in the Advanced section.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several ones, or even install them all by selecting the \"%s\"\n" "box. Selecting support for a language means translations, fonts, spell\n" "checkers, etc. for that language will be installed. Additionally, the\n" "\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n" "however that this is an experimental feature. If you select different\n" "languages requiring different encoding the unicode support will be\n" "installed anyway.\n" "\n" "To switch between the various languages installed on the system, you can\n" "launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n" "language used by the entire system. Running the command as a regular user\n" "will only change the language settings for that particular user." msgstr "" "설치시 그리고 시스템용으로 사용할 언어를 선택하세요.\n" "\n" "「고급」을 누르면, 다른 언어도 추가로 선택할 수 있습니다.\n" "다른 언어도 선택하게 되면, 그 언어와 관련된 시스템 문서 및 프로그램 파일들" "도\n" "설치하게 됩니다. 가령, 님의 시스템을 일본인도 사용할 수 있도록 하고 싶다면,\n" "목록에서 주 언어로 「한국어」를 선택하고, 「고급」에서 「일본어」에 해당하" "는\n" "회색 별표를 선택하세요.\n" "\n" "여러개의 추가 언어를 선택할 수도 있습니다. 언어 선택을 끝마쳤으면,\n" "「확인」을 눌러서 계속 진행하세요." #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not supported by this version of Mandrake Linux." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "tape" msgstr "테입" #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP client" msgstr "DHCP 클라이언트" #: ../../security/l10n.pm:1 #, c-format msgid "List users on display managers (kdm and gdm)" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "로지텍 마우스 (시리얼, 오래된 C7 형태)" #: ../../partition_table.pm:1 #, c-format msgid "Restoring from file %s failed: %s" msgstr "%s 파일로부터의 복구 실패: %s" #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "" "I can't read the partition table of device %s, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to lose all the partitions?\n" msgstr "" "하드 디스크의 파티션 테이블을 읽을수 없습니다. 너무 손상되어 있습니다:(\n" "문제있는 파티션을 비우기위한 시도를 할 수 있습니다.(모든 데이터가 손실됩니" "다!)\n" "다른 해결책은 DrakX가 파티션 테이블을 변경하지 못하게 하는 것입니다.\n" "(오류는 %s 입니다.)\n" "\n" "파티션들을 잃어도 좋습니까?\n" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Find Package" msgstr "%d 팩키지" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "New devfs device" msgstr "새로운 devfs 장치" #: ../../standalone/drakbackup:1 #, c-format msgid "ERROR: Cannot spawn %s." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Boot Style Configuration" msgstr "부팅 스타일 설정" #: ../../help.pm:1 #, fuzzy, c-format msgid "Automatic time synchronization" msgstr "자동 시간 동기화 (NTP 사용)" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files not found at %s." msgstr "%s에서 백업 파일을 찾을 수 없습니다." #: ../../keyboard.pm:1 #, c-format msgid "Armenian (phonetic)" msgstr "미국 (음성학)" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Card model:" msgstr "카드 모델:" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Thin Client" msgstr "DHCP 클라이언트" #: ../../share/advertising/01-thanks.pl:1 #, c-format msgid "Thank you for choosing Mandrake Linux 9.2" msgstr "맨드레이크 리눅스 9.2를 선택해 주셔서 감사합니다." #: ../../standalone/drakTermServ:1 #, c-format msgid "Start Server" msgstr "서버 시작" #: ../../lang.pm:1 #, c-format msgid "Turkmenistan" msgstr "투르크멘" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "All remote machines" msgstr "(이 서버상의)" #: ../../standalone/drakboot:1 #, c-format msgid "Install themes" msgstr "테마 설치" #: ../../help.pm:1 #, c-format msgid "Espanol" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing installation" msgstr "설치 준비중입니다" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Edit selected host/network" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add User -->" msgstr "사용자 추가 -->" #: ../../lang.pm:1 #, c-format msgid "Nauru" msgstr "나우루" #: ../../standalone/drakfont:1 #, c-format msgid "True Type fonts installation" msgstr "트루타입 폰트 설치" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "LAN configuration" msgstr "LAN 설정" #: ../../standalone/harddrake2:1 #, c-format msgid "hard disk model" msgstr "하드 디스크 모델" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain /etc/exports:\n" " \tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \tdiskless clients.\n" "\n" " \tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" " \tWith SUBNET/MASK being defined for your network." msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr " %s 마운트 포인트로 LVM 논리볼륨을 사용할 수는 없습니다. " #: ../../standalone/drakfont:1 #, c-format msgid "Get Windows Fonts" msgstr "윈도우즈 폰트 가져오기" #: ../../mouse.pm:1 #, c-format msgid "Mouse Systems" msgstr "마우스 시스템" #: ../../keyboard.pm:1 #, c-format msgid "Iranian" msgstr "이란" #: ../../lang.pm:1 #, c-format msgid "Croatia" msgstr "크로아티아" #: ../../standalone/drakconnect:1 #, c-format msgid "Gateway:" msgstr "게이트웨이:" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Add server" msgstr "사용자 추가" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote printer name" msgstr "원격 프린터명" #: ../../share/advertising/10-security.pl:1 #, c-format msgid "" "MandrakeSoft has designed exclusive tools to create the most secured Linux " "version ever: Draksec, a system security management tool, and a strong " "firewall are teamed up together in order to highly reduce hacking risks." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Device: " msgstr "장치: " #: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 #, c-format msgid "Printerdrake" msgstr "프린터드레이크" #: ../../install_steps_interactive.pm:1 #, c-format msgid "License agreement" msgstr "사용 동의서" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "System Options" msgstr "추가 옵션" #: ../../security/level.pm:1 #, c-format msgid "Please choose the desired security level" msgstr "희망하는 보안 단계를 선택해 주세요." #: ../../standalone/scannerdrake:1 #, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid ", USB printer" msgstr "프린터 없음" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "" "Unable to properly close mkbootdisk:\n" "\n" "%s" msgstr "" "mkbootdisk를 올바르게 종료할 수 없습니다: \n" " %s \n" " %s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Incremental backups only save files that have changed or are new since the " "last backup." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Choose the applications that will support the fonts:" msgstr "이 폰트를 지원할 프로그램들을 선택하세요" #: ../../steps.pm:1 #, c-format msgid "Configure X" msgstr "X 설정" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "hd" msgstr "챠드" #: ../../keyboard.pm:1 #, c-format msgid "Turkish (traditional \"F\" model)" msgstr "터기 (전통 「F」모델" #: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1 #: ../../standalone/scannerdrake:1 #, c-format msgid "Congratulations!" msgstr "축하합니다!" #: ../../standalone/drakperm:1 #, c-format msgid "Use owner id for execution" msgstr "실행시 소유자 아이디 사용" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Allow remote root login" msgstr "(이 서버상의)" #: ../../standalone/drakperm:1 #, c-format msgid "Down" msgstr "아래로" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Raw printer (No driver)" msgstr "날(RAW) 프린터 (드라이버 사용안함)" #: ../../network/modem.pm:1 #, fuzzy, c-format msgid "Install rpm" msgstr "설치" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Time remaining " msgstr "남은 시간 " #: ../../keyboard.pm:1 #, c-format msgid "UK keyboard" msgstr "영국" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Unmount" msgstr "언마운트" #: ../../mouse.pm:1 #, c-format msgid "Microsoft Explorer" msgstr "마이크로소프트 익스플로러" #: ../../standalone/drakfont:1 #, c-format msgid "Uninstall Fonts" msgstr "폰트 제거" #: ../../keyboard.pm:1 #, c-format msgid "German (no dead keys)" msgstr "독일 (dead 키 없음)" #: ../../standalone/drakbackup:1 #, c-format msgid "\tSend mail to %s\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transferring %s..." msgstr "%s 전송 중 ..." #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "32 thousand colors (15 bits)" msgstr "3만2천 색상 (15 bits)" #: ../../any.pm:1 #, c-format msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "NFS와 삼바 중, 어느 것을 이용하시겠습니까?" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Reboot" msgstr "루트" #: ../../lang.pm:1 #, c-format msgid "Gambia" msgstr "잠비아" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Control Center" msgstr "맨드레이크 제어 센터" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp.\n" "Have a look at /etc/services for information." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Tape \n" msgstr "" #: ../../standalone/drakhelp:1 #, c-format msgid "" "No browser is installed on your system, Please install one if you want to " "browse the help system" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Remember this password" msgstr "비밀번호 기억" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing is now enabled." msgstr "이제 인터넷 연결 공유가 허용되었습니다." #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by SSH.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid " cable" msgstr "테이블" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Use the free space on the Windows partition" msgstr "윈도우즈 파티션의 빈 공간 사용하세요." #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "%s found on %s, configure it automatically?" msgstr "%s이 %s에서 발견되었습니다. 설정하시겠습니까?" #: ../../Xconfig/various.pm:1 #, c-format msgid "XFree86 driver: %s\n" msgstr "XFree86 드라이버: %s\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the packages you want to install" msgstr "설치하고자 하는 팩키지를 선택하세요." #: ../../lang.pm:1 #, c-format msgid "Papua New Guinea" msgstr "파푸아뉴기니" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Multi-function device on a parallel port" msgstr "프린터 호스트명 또는 IP" #: ../../keyboard.pm:1 #, c-format msgid "Serbian (cyrillic)" msgstr "세르비아 (시릴)" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Enter the directory where backups are stored" msgstr "백업 파일들이 저장될 디렉토리를 입력하세요." #: ../../standalone/draksplash:1 #, c-format msgid "Make kernel message quiet by default" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" "이 프린터(%s)를\n" "기본 프린터로 하시겠습니까?" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP end range" msgstr "" #: ../../any.pm:1 #, c-format msgid "Creating bootdisk..." msgstr "부트 디스크 생성중" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Wait please, testing your connection..." msgstr "연결 테스트 중..." #: ../../install_interactive.pm:1 #, c-format msgid "Bringing down the network" msgstr "네트웍 해제 중..." #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Login ID" msgstr "로그인 ID" #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS는 TCP/IP 네트웍으로 파일을 공유하는 인기있는 프로토콜입니다.\n" "이 서비스는 NFS 파일 잠금 기능을 제공합니다." #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP Client" msgstr "DHCP 클라이언트" #: ../../standalone/drakgw:1 #, c-format msgid "dismiss" msgstr "취소" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printing/Scanning on \"%s\"" msgstr "프린터「%s」상에서 인쇄 중" #: ../../standalone/drakfloppy:1 #, c-format msgid "omit raid modules" msgstr "RAID 모듈 생략" #: ../../services.pm:1 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "LPD는 lpr 명령이 올바르게 작동하기 위해 필요한 인쇄 대몬입니다.\n" "근본적으로 인쇄 작업들을 프린터로 중재해 주는 서버입니다." #: ../../keyboard.pm:1 #, c-format msgid "Irish" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Sunday" msgstr "일요일" #: ../../standalone/drakconnect:1 #, c-format msgid "Internet Connection Configuration" msgstr "인터넷 연결 설정" #: ../../modules/parameters.pm:1 #, c-format msgid "comma separated numbers" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule up one level" msgstr "선택된 규칙 한 단계 위로" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "시스템 폰트 복사" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "정말로 「%s」프린터를 제거합니까?" #: ../../install_interactive.pm:1 #, c-format msgid "I can't find any room for installing" msgstr "설치에 필요한 공간을 찾을 수 없습니다." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Default printer" msgstr "기본 프린터" #: ../../network/netconnect.pm:1 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "인터넷 접속방식을 여러개 설정했습니다.\n" "연결에 사용할 방식을 선택하세요.\n" "\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Modify RAID" msgstr "RAID 수정" #: ../../network/isdn.pm:1 #, c-format msgid "" "I have detected an ISDN PCI card, but I don't know its type. Please select a " "PCI card on the next screen." msgstr "" "ISDN PCI 카드가 감지되었지만, 그 유형을 알 수 없습니다. 다음 화면에서 PCI 카" "드를 선택해 주세요." #: ../../any.pm:1 #, c-format msgid "Add user" msgstr "사용자 추가" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "RAID-disks %s\n" msgstr "레이드-디스크 %s\n" #: ../../lang.pm:1 #, c-format msgid "Liberia" msgstr "라이베리아" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Could not install the packages needed to set up a scanner with Scannerdrake." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Choose your keyboard" msgstr "키보드 선택" #: ../../steps.pm:1 #, c-format msgid "Format partitions" msgstr "파티션 포맷" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Automatic correction of CUPS configuration" msgstr "자동 CUPS 설정" #: ../../standalone/harddrake2:1 #, c-format msgid "Running \"%s\" ..." msgstr "「%s」 실행 중..." #: ../../harddrake/v4l.pm:1 #, c-format msgid "enable radio support" msgstr "라디오 지원" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Scanner sharing to hosts: " msgstr "파일 공유" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: %s" msgstr "루프백 파일 이름: %s" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "프린터가 연결된 포트를 선택하세요." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do not transfer printers" msgstr "프린터 전송 하지않음" #: ../../help.pm:1 #, fuzzy, c-format msgid "Delay before booting the default image" msgstr "기본 이미지로 부팅될 때까지 지연시간" #: ../../standalone/drakfont:1 #, c-format msgid "" "\n" " Copyright (C) 2001-2002 by MandrakeSoft \n" " DUPONT Sebastien (original version)\n" " CHAUMETTE Damien \n" "\n" " This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" "\n" " Thanks:\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Hard Disk to backup" msgstr "하드 디스크로 백업" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakgw:1 #, c-format msgid "Configure" msgstr "설정" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Scannerdrake" msgstr "스캐너 선택" #: ../../standalone/drakconnect:1 #, c-format msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Users" msgstr "사용자 백업" #: ../../network/network.pm:1 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" "호스트 이름을 입력해 주세요.\n" "호스트 이름은 ``mybox.mylab.myco.com''과 같이 완전한 호스트 \n" "이름이어야 합니다. \n" "게이트 웨이가 있다면 그 IP 주소도 입력해야 합니다." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select Printer Spooler" msgstr "프린터 스풀러을 선택하세요." #: ../../standalone/drakboot:1 #, c-format msgid "Create new theme" msgstr "새 테마 만들기" #: ../../standalone/logdrake:1 #, c-format msgid "Mandrake Tools Explanation" msgstr "맨드레이크 도구 설명" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "No image found" msgstr "프린터를 찾을 수 없습니다!" #: ../../install_steps.pm:1 #, c-format msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" "일부 중요한 팩키지들이 올바르게 설치되지 않았습니다.\n" "CDROM 드라이브 또는 미디어가 손상되었습니다.\n" "이미 설치가 완료된 컴퓨터에서 「rpm -qpl Mandrake/RPMS/*.rpm」명령으로 점검" "해 보세요.\n" #: ../../share/advertising/06-development.pl:1 #, c-format msgid "Mandrake Linux 9.2: the ultimate development platform" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Detected model: %s" msgstr "검색된 모델: %s %s" #: ../../standalone/logdrake:1 #, c-format msgid "\"%s\" is not a valid email!" msgstr "" #: ../../standalone/drakedm:1 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run the daily security checks." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Azerbaijan" msgstr "아제르바이잔" #: ../../standalone/drakbackup:1 #, c-format msgid "Device name to use for backup" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No tape in %s!" msgstr "" #: ../../standalone/drakhelp:1 #, c-format msgid "" " --doc - link to another web page ( for WM welcome " "frontend)\n" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (US)" msgstr "드보락(US)" #: ../../standalone/harddrake2:1 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "How is the printer connected?" msgstr "프린터가 어떻게 연결되어 있습니까?" #: ../../security/level.pm:1 #, c-format msgid "Security level" msgstr "보안 수준" #: ../../standalone/draksplash:1 #, c-format msgid "final resolution" msgstr "최종 해상도" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1 #, c-format msgid "Services" msgstr "서비스" #: ../../Xconfig/card.pm:1 #, c-format msgid "4 MB" msgstr "4 MB" #: ../../share/compssUsers:999 msgid "Office Workstation" msgstr "오피스 워크스테이션" #: ../../share/compssUsers:999 msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "오피스 프로그램들: 워드프로세서 (kword, abiword), 스프레드쉬트 (kspread," "gnumeric), pdf 뷰어, 등등" #: ../../share/compssUsers:999 msgid "Game station" msgstr "게임 스테이션" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "장난감 프로그램: arcade, boards, strategy, 등등" #: ../../share/compssUsers:999 msgid "Multimedia station" msgstr "멀티미디어 스테이션" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "사운드 및 비디오 연주/편집 프로그램" #: ../../share/compssUsers:999 msgid "Internet station" msgstr "인터넷 스테이션" #: ../../share/compssUsers:999 msgid "" "Set of tools to read and send mail and news (pine, mutt, tin..) and to " "browse the Web" msgstr "메일/뉴스를 일고 보내며 웹검색을 위한 도구모음(pine, mutt, tin...)" #: ../../share/compssUsers:999 msgid "Network Computer (client)" msgstr "네트웍 컴퓨터 (클라이언트)" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "SSH 및 다른 프로토콜의 클라이언트" #: ../../share/compssUsers:999 msgid "Configuration" msgstr "설정" #: ../../share/compssUsers:999 msgid "Tools to ease the configuration of your computer" msgstr "쉬운 컴퓨터 설정을 위한 도구" #: ../../share/compssUsers:999 msgid "Scientific Workstation" msgstr "과학 워크스테이션" #: ../../share/compssUsers:999 msgid "Scientific applications such as gnuplot" msgstr "" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "콘솔 도구" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "에디터, 쉘, 파일도구, 터미널" #: ../../share/compssUsers:999 msgid "KDE Workstation" msgstr "KDE 워크스테이션" #: ../../share/compssUsers:999 msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "K Desktop 환경, 여러가지 도구를 수반한 기본 그래픽 환경" #: ../../share/compssUsers:999 msgid "Gnome Workstation" msgstr "GNOME 워크스테이션" #: ../../share/compssUsers:999 msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "사용자 친화적 프로그램과 데스크탑 도구를 가진 그래픽 환경" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "기타 그래픽 데스크탑" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Icewm, 윈도우 메이커, 인라이튼먼트, Fvwm, 등등" #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "C/C++ 개발 라이브러리, 프로그램 및 헤더파일" #: ../../share/compssUsers:999 msgid "Documentation" msgstr "문서" #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "리눅스 및 자유 소프트웨어에 대한 서적과 Howto문서" #: ../../share/compssUsers:999 msgid "LSB" msgstr "LSB" #: ../../share/compssUsers:999 msgid "Linux Standard Base. Third party applications support" msgstr "리눅스 표준 기반. 외부 애플리케이션 지원" #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "웹/FTP" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "아파치와 프로FTPD" #: ../../share/compssUsers:999 #, fuzzy msgid "Mail" msgstr "말리" #: ../../share/compssUsers:999 #, fuzzy msgid "Postfix mail server" msgstr "포스트픽스 메일 서버" #: ../../share/compssUsers:999 msgid "Database" msgstr "데이터베이스" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "PostgreSQL 또는 MySQL 데이터베이스 서버" #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "방화벽/라우터" #: ../../share/compssUsers:999 msgid "Internet gateway" msgstr "인터넷 게이트웨이" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "DNS/NIS" #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "도메인 네임 및 네트웍 정보 서버" #: ../../share/compssUsers:999 msgid "Network Computer server" msgstr "네트웍 컴퓨터 서버" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "NFS 서버, 삼바 서버, 프락시 서버, SSH 서버" #: ../../share/compssUsers:999 #, fuzzy msgid "Set of tools to read and send mail and news and to browse the Web" msgstr "메일/뉴스를 일고 보내며 웹검색을 위한 도구모음(pine, mutt, tin...)" #~ msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" #~ msgstr "" #~ "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-1,-*-gulim-bold-r-" #~ "normal--25-*-*-*-c-*-ksc5601.1987-0,*-r-*" #~ msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" #~ msgstr "" #~ "-adobe-helvetica-bold-r-normal--16-*-75-75-p-*-iso8859-1,-*-gulim-bold-r-" #~ "normal--16-*-75-75-*-*-ksc5601.1987-0,*-r-*" #~ msgid "Remote Printers" #~ msgstr "원격 프린터" #~ msgid "Printing system: " #~ msgstr "인쇄 시스템:" #~ msgid "Load" #~ msgstr "읽음" #~ msgid "Output" #~ msgstr "출력" #~ msgid "Please relog into %s to activate the changes" #~ msgstr "변경사항을 적용하려면 %s로 재로그인 하세요." #~ msgid "Please enter your password" #~ msgstr "비밀번호를 입력하세요." #~ msgid "Please check if you want to erase your tape before the backup." #~ msgstr "백업하기 전에 테입을 지울지 확인하세요." #~ msgid "Please enter the host name or IP." #~ msgstr "호스트 이름 또는 IP를 입력하세요." #~ msgid "edit" #~ msgstr "편집" #~ msgid "path" #~ msgstr "경로" #~ msgid "permissions" #~ msgstr "허가권" #~ msgid "delete" #~ msgstr "삭제" #~ msgid "user" #~ msgstr "사용자" #~ msgid "Expert Area" #~ msgstr "전문가 영역" #~ msgid "Wizard..." #~ msgstr "마법사..." #~ msgid "Previous" #~ msgstr "이전" #~ msgid "Please check if you are using CDRW media" #~ msgstr "CDRW 매체를 사용하고 있는지 확인하세요." #~ msgid "We are now going to configure the %s connection." #~ msgstr "이제 「%s」연결을 설정할 것입니다." #~ msgid "Name: %s\n" #~ msgstr "이름: %s\n" #~ msgid "" #~ "Which ISDN configuration do you prefer?\n" #~ "\n" #~ "* The Old configuration uses isdn4net. It contains powerful\n" #~ " tools, but is tricky to configure, and not standard.\n" #~ "\n" #~ "* The New configuration is easier to understand, more\n" #~ " standard, but with less tools.\n" #~ "\n" #~ "We recommand the light configuration.\n" #~ msgstr "" #~ "어떤 ISDN 설정 방식을 선호하십니까?\n" #~ "\n" #~ "* 기존의 설정은 ISDN4NET을 사용합니다. 강력하지만 초보자에겐\n" #~ " 어렵고 또한 표준이 아닙니다.\n" #~ "\n" #~ "* 새로운 설정은 쉽고 보다 표준적이지만, 강력한 도구는 디소\n" #~ " 부족합니다.\n" #~ "\n" #~ "「ISDN-LIGHT」를 추천합니다.\n" #~ "\n" #~ msgid "New configuration (isdn-light)" #~ msgstr "새로운 설정 (ISDN-LIGHT)" #~ msgid "Old configuration (isdn4net)" #~ msgstr "기존의 설정 (ISDN4NET)" #~ msgid "Internet connection & configuration" #~ msgstr "인터넷 연결 & 설정" #~ msgid "Disconnect" #~ msgstr "연결 끊기" #~ msgid "Connect" #~ msgstr "연결" #~ msgid "" #~ "\n" #~ "You can reconfigure your connection." #~ msgstr "" #~ "\n" #~ "연결을 다시 설정할 수 있습니다." #~ msgid "" #~ "\n" #~ "You can connect to the Internet or reconfigure your connection." #~ msgstr "" #~ "\n" #~ "인터넷에 연결하거나 연결을 재설정할 수 있습니다." #~ msgid "You are not currently connected to the Internet." #~ msgstr "현재 인터넷에 연결되어 있지 않습니다." #~ msgid "" #~ "\n" #~ "You can disconnect or reconfigure your connection." #~ msgstr "" #~ "\n" #~ "연결을 해제하거나 다시 설정할 수 있습니다." #~ msgid "You are currently connected to the Internet." #~ msgstr "현재 인터넷에 연결되어 있습니다." #~ msgid "files sending by FTP" #~ msgstr "FTP로 파일 전송" #~ msgid "Relaunch 'lilo'" #~ msgstr "릴로 재실행" #~ msgid "Copy %s to %s" #~ msgstr "%s를 %s로 복사" #~ msgid "Backup %s to %s.old" #~ msgstr "%s를 %s.old로 백업" #~ msgid "ttf fonts conversion" #~ msgstr "ttf 폰트 변환" #~ msgid "Fonts conversion" #~ msgstr "폰트 변환" #~ msgid "Author:" #~ msgstr "제작자:" #~ msgid "Office" #~ msgstr "오피스" #~ msgid "Set of tools for mail, news, web, file transfer, and chat" #~ msgstr "메일, 뉴스, 웹, 파일전송, 채팅용 도구모음" #~ msgid "Games" #~ msgstr "게임" #~ msgid "Multimedia - Graphics" #~ msgstr "멀티미디어 - 그래픽" #~ msgid "Multimedia - Sound" #~ msgstr "멀티미디어 - 사운드" #~ msgid "Audio-related tools: mp3 or midi players, mixers, etc" #~ msgstr "오디오 관련 도구; mp3/midi 플레이어, 믹서, 등등" #~ msgid "Multimedia - Video" #~ msgstr "멀티미디어 - 비디오" #~ msgid "Video players and editors" #~ msgstr "비디오 플레이어 및 에디터" #~ msgid "Multimedia - CD Burning" #~ msgstr "멀티미디어 - CD 굽기" #~ msgid "Tools to create and burn CD's" #~ msgstr "CD 제작 및 굽기 도구" #~ msgid "More Graphical Desktops (Gnome, IceWM)" #~ msgstr "추가 그래픽 데스크탑 (Gnome, IceWM)" #~ msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc" #~ msgstr "그놈, Icewm, 윈도우 메이커, 인라이튼먼트, Fvwm, 등등" #~ msgid "Personal Information Management" #~ msgstr "개인 정보관리" #~ msgid "Tools for your Palm Pilot or your Visor" #~ msgstr "Palm pilot 또는 Visor용 도구들" #~ msgid "Personal Finance" #~ msgstr "개인 금융" #~ msgid "Programs to manage your finances, such as gnucash" #~ msgstr "gnucash 같은 자금관리 프로그램" #~ msgid "no network card found" #~ msgstr "네트웍 카드를 찾을수 없습니다" #~ msgid "Get involved in the Free Software world" #~ msgstr "자유 소프트웨어 세계에 참여하세요." #~ msgid "Get the most from the Internet" #~ msgstr "인터넷에서 마음껏 구해 보세요." #~ msgid "User interfaces" #~ msgstr "사용자 인터페이스" #~ msgid "Development simplified" #~ msgstr "간편한 개발" #~ msgid "" #~ "Please enter your host name if you know it.\n" #~ "Some DHCP servers require the hostname to work.\n" #~ "Your host name should be a fully-qualified host name,\n" #~ "such as ``mybox.mylab.myco.com''." #~ msgstr "" #~ "호스트명을 알고 있다면 입력하세요.\n" #~ "일부 DHCP 서버는 호스트명을 요구할 수 있습니다.\n" #~ "호스트명은 완벽한 정규형이어야 합니다.\n" #~ "예)「mybox.mylab.myco.com」" #~ msgid "DrakFloppy Error: %s" #~ msgstr "플로피드레이크 오류: %s" #~ msgid "Launch Aurora at boot time" #~ msgstr "부팅시 오로라 실행" #~ msgid "Traditional Gtk+ Monitor" #~ msgstr "전통적 GTK+ 모니터" #~ msgid "Traditional Monitor" #~ msgstr "전통적 모니터" #~ msgid "NewStyle Monitor" #~ msgstr "새 스타일 모니터" #~ msgid "NewStyle Categorizing Monitor" #~ msgstr "새 스타일 범주화 모니터" #~ msgid "Secure Connection" #~ msgstr "보안 연결" #~ msgid "FTP Connection" #~ msgstr "FTP 연결" #~ msgid "Mail/Groupware/News" #~ msgstr "메일/그룹웨어/뉴스" #~ msgid "Postfix mail server, Inn news server" #~ msgstr "postfix 메일 서버, Inn 뉴스 서버" #~ msgid "/Options" #~ msgstr "/옵션(O)" #~ msgid "" #~ "The partition you've selected to add as root (/) is physically located " #~ "beyond\n" #~ "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" #~ "If you plan to use the LILO boot manager, be careful to add a /boot " #~ "partition" #~ msgstr "" #~ "선택한 root(/)가 물리적으로 1024실린더 뒤에 있습니다.\n" #~ "따라서 /boot 파티션을 가질수 없습니다.\n" #~ "LILO 부트 매니저를 사용하려 한다면, 주의해서 /boot 파티션을 추가하세요." #~ msgid "" #~ "Sorry I won't accept to create /boot so far onto the drive (on a cylinder " #~ "> 1024).\n" #~ "Either you use LILO and it won't work, or you don't use LILO and you " #~ "don't need /boot" #~ msgstr "" #~ "죄송합니다. /boot 디렉토리가 드라이브상에서 허용범위를 넘어서 있어 생성할" #~ "수 없습니다. ( 1024 실린더 이하에서만 가능합니다.\n" #~ "LILO를 사용한다고 하더라도 동작하지 않고, LILO 자체를 사용할수도 없습니다." #~ msgid "Do you want to configure another printer?" #~ msgstr "또다른 프린터를 설정하시겠습니까?" #~ msgid "Know how to use this printer" #~ msgstr "이 프린터의 사용법 알아보기" #~ msgid "Preparing Printerdrake..." #~ msgstr "프린터 드레이크 준비 중 ..." #~ msgid "Reading printer data ..." #~ msgstr "프린터 데이터 읽는 중 ..." #~ msgid "" #~ "You must indicate where you wish to place the information required to " #~ "boot\n" #~ "GNU/Linux.\n" #~ "\n" #~ "Unless you know exactly what you are doing, choose \"First sector of " #~ "drive\n" #~ "(MBR)\"." #~ msgstr "" #~ "GNU/리눅스를 부팅하는데 필요한 정보를 어디에 위치시킬 것인지\n" #~ "지정해 주세요.\n" #~ "\n" #~ "지금 무엇을 묻고 있는지 조차 모르겠다면,\n" #~ "「디스크의 첫 섹터(MBR)」를 선택하세요." #~ msgid "Please be patient. This operation can take several minutes." #~ msgstr "기다려 주세요. 이 작업은 몇 분의 시간이 걸립니다." #~ msgid "" #~ "Your new Mandrake Linux operating system is currently being installed.\n" #~ "Depending on the number of packages you will be installing and the speed " #~ "of\n" #~ "your computer, this operation could take from a few minutes to a\n" #~ "significant amount of time.\n" #~ "\n" #~ "Please be patient." #~ msgstr "" #~ "지금 새 리눅스 맨드레이크 운영체제를 설치하고 있습니다.\n" #~ "이 작업을 끝내기 위해서는 시간이 좀 걸립니다.\n" #~ "총소요 시간은 선택한 팩키지의 양과 컴퓨터 성능에 따라 크게 달라질 수 있습" #~ "니다.\n" #~ "\n" #~ "인내심을 가지세요." #~ msgid "Detecting devices ..." #~ msgstr "장치 검색 중 ..." #~ msgid "Test ports" #~ msgstr "포트 검사"