# DrakX Japanese Translation.
# Copyright (c) 1999 MandrakeSoft
# Junichi Kimura <jun@kde.gr.jp>, 1999-2000
# YAMAGATA Hiroo <hiyori13@alum.mit.edu>, 1999-2000
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX VERSION\n"
"POT-Creation-Date: 2000-11-11 21:39+0100\n"
"PO-Revision-Date: 1999-12-10 16:27+0100\n"
"Last-Translator: YAMAGATA Hiroo <hiyori13@alum.mit.edu>\n"
"Language-Team: Japanese\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=euc-jp\n"
"Content-Transfer-Encoding: 8bit\n"

#: ../../Xconfigurator.pm_.c:179
msgid "Graphic card"
msgstr "グラフィックカード"

#: ../../Xconfigurator.pm_.c:179
msgid "Select a graphic card"
msgstr "グラフィックカードを選択して下さい"

#: ../../Xconfigurator.pm_.c:180
msgid "Choose a X server"
msgstr "X サーバを選んで下さい"

#: ../../Xconfigurator.pm_.c:180
msgid "X server"
msgstr "X サーバ"

#: ../../Xconfigurator.pm_.c:217 ../../Xconfigurator.pm_.c:223
#, c-format
msgid "XFree %s"
msgstr "XFree %s"

#: ../../Xconfigurator.pm_.c:220
msgid "Which configuration of XFree do you want to have?"
msgstr "どの構成のXFree にしますか"

#: ../../Xconfigurator.pm_.c:232
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"このカードはXFree %s でのみ3Dアクセラレーション可能です。\n"
"XFree %s でのこのカードのサポートは、2D のほうがすぐれています。"

#: ../../Xconfigurator.pm_.c:234 ../../Xconfigurator.pm_.c:257
#, c-format
msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr "このカードはXFree %s で3Dアクセラレーション可能です。"

#: ../../Xconfigurator.pm_.c:236 ../../Xconfigurator.pm_.c:259
#, c-format
msgid "XFree %s with 3D hardware acceleration"
msgstr "ハードウェア3DアクセラレーションつきのXFree %s"

#: ../../Xconfigurator.pm_.c:245
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"このカードはハード3Dアクセラレーションが可能ですが、XFree %sが必要です。\n"
"ただしあくまで、実験的なサポートで、マシンフリーズの可能性があります。\n"
"XFree %s でのこのカードのサポートは、2D のほうがすぐれています。"

#: ../../Xconfigurator.pm_.c:248
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"このカードはXFree %s で3Dアクセラレーション可能です。\n"
"ただしあくまで、実験的なサポートで、マシンフリーズの可能性があります。"

#: ../../Xconfigurator.pm_.c:250
#, c-format
msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "実験段階のハードウェア3DアクセラレーションつきのXFree %s"

#: ../../Xconfigurator.pm_.c:265
msgid "XFree configuration"
msgstr "XFreeの設定"

#: ../../Xconfigurator.pm_.c:303
msgid "Select the memory size of your graphic card"
msgstr "グラフィックカードのメモリサイズを選択して下さい"

#: ../../Xconfigurator.pm_.c:347
msgid "Choose options for server"
msgstr "サーバのオプションを選んで下さい"

#: ../../Xconfigurator.pm_.c:358
msgid "Choose a monitor"
msgstr "モニタを選んで下さい"

#: ../../Xconfigurator.pm_.c:358
msgid "Monitor"
msgstr "モニタ"

#: ../../Xconfigurator.pm_.c:361
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"大事なパラメータが2つあります。垂直リフレッシュレート(スクリーン全体\n"
"を再描画する周期)と水平リフレッシュレート(走査線の表示周期，もっとも\n"
"重要)です。\n"
"\n"
"*重要* モニタの許容範囲内の垂直，水平同期範囲を指定しないと，\n"
"モニタがダメージを受けるかも知れません。\n"
"分からない場合は, 低めの設定にして下さい。"

#: ../../Xconfigurator.pm_.c:368
msgid "Horizontal refresh rate"
msgstr "水平リフレッシュレート"

#: ../../Xconfigurator.pm_.c:368
msgid "Vertical refresh rate"
msgstr "垂直リフレッシュレート"

#: ../../Xconfigurator.pm_.c:407
msgid "Monitor not configured"
msgstr "モニタが設定されてません"

#: ../../Xconfigurator.pm_.c:410
msgid "Graphic card not configured yet"
msgstr "グラフィックカードが設定されてません"

#: ../../Xconfigurator.pm_.c:413
msgid "Resolutions not chosen yet"
msgstr "解像度が選択されてません"

#: ../../Xconfigurator.pm_.c:429
msgid "Do you want to test the configuration?"
msgstr "この設定で試してみますか？"

#: ../../Xconfigurator.pm_.c:433
msgid "Warning: testing this graphic card may freeze your computer"
msgstr ""
"警告：このグラフィックカードをテストするとマシンがフリーズするかもしれません"

#: ../../Xconfigurator.pm_.c:436
msgid "Test of the configuration"
msgstr "設定を試します"

#: ../../Xconfigurator.pm_.c:475
msgid ""
"\n"
"try to change some parameters"
msgstr ""
"\n"
"いくつかパラメータを変えてみてください"

#: ../../Xconfigurator.pm_.c:475
msgid "An error has occurred:"
msgstr "エラー発生"

#: ../../Xconfigurator.pm_.c:497
#, c-format
msgid "Leaving in %d seconds"
msgstr "あと %d 秒で戻ります"

#: ../../Xconfigurator.pm_.c:507
msgid "Is this the correct setting?"
msgstr "設定はこれでいいですか？"

#: ../../Xconfigurator.pm_.c:515
msgid "An error has occurred, try to change some parameters"
msgstr "エラー発生，いくつかのパラメータを変えてみてください"

#: ../../Xconfigurator.pm_.c:552 ../../printerdrake.pm_.c:276
msgid "Resolution"
msgstr "解像度"

#: ../../Xconfigurator.pm_.c:587
msgid "Choose the resolution and the color depth"
msgstr "解像度と色深度"

#: ../../Xconfigurator.pm_.c:589
#, c-format
msgid "Graphic card: %s"
msgstr "グラフィックカード: %s"

#: ../../Xconfigurator.pm_.c:590
#, c-format
msgid "XFree86 server: %s"
msgstr "XFree86 サーバ: %s"

#: ../../Xconfigurator.pm_.c:599
msgid "Show all"
msgstr "全てを表示"

#: ../../Xconfigurator.pm_.c:623
msgid "Resolutions"
msgstr "解像度"

#: ../../Xconfigurator.pm_.c:1021
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "キーボードレイアウト: %s\n"

#: ../../Xconfigurator.pm_.c:1022
#, c-format
msgid "Mouse type: %s\n"
msgstr "マウスの種類: %s\n"

#: ../../Xconfigurator.pm_.c:1023
#, c-format
msgid "Mouse device: %s\n"
msgstr "マウスデバイス: %s\n"

#: ../../Xconfigurator.pm_.c:1024
#, c-format
msgid "Monitor: %s\n"
msgstr "モニタ: %s\n"

#: ../../Xconfigurator.pm_.c:1025
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "モニタ水平同期: %s\n"

#: ../../Xconfigurator.pm_.c:1026
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "モニタ垂直リフレッシュ: %s\n"

#: ../../Xconfigurator.pm_.c:1027
#, c-format
msgid "Graphic card: %s\n"
msgstr "グラフィックカード: %s\n"

#: ../../Xconfigurator.pm_.c:1028
#, c-format
msgid "Graphic memory: %s kB\n"
msgstr "グラフィックメモリ: %s kB\n"

#: ../../Xconfigurator.pm_.c:1030
#, c-format
msgid "Color depth: %s\n"
msgstr "色深度: %s\n"

#: ../../Xconfigurator.pm_.c:1031
#, c-format
msgid "Resolution: %s\n"
msgstr "解像度: %s\n"

#: ../../Xconfigurator.pm_.c:1033
#, c-format
msgid "XFree86 server: %s\n"
msgstr "XFree86 サーバ: %s\n"

#: ../../Xconfigurator.pm_.c:1034
#, c-format
msgid "XFree86 driver: %s\n"
msgstr "XFree86 ドライバ: %s\n"

#: ../../Xconfigurator.pm_.c:1053
msgid "Preparing X-Window configuration"
msgstr "X Window System の設定の準備"

#: ../../Xconfigurator.pm_.c:1067
msgid "Change Monitor"
msgstr "モニタの変更"

#: ../../Xconfigurator.pm_.c:1068
msgid "Change Graphic card"
msgstr "グラフィックカードの変更"

#: ../../Xconfigurator.pm_.c:1069
msgid "Change Server options"
msgstr "サーバオプションの変更"

#: ../../Xconfigurator.pm_.c:1070
msgid "Change Resolution"
msgstr "解像度の変更"

#: ../../Xconfigurator.pm_.c:1071
msgid "Show information"
msgstr "情報を表示"

#: ../../Xconfigurator.pm_.c:1072
msgid "Test again"
msgstr "もう一回テスト"

#: ../../Xconfigurator.pm_.c:1073 ../../standalone/rpmdrake_.c:46
msgid "Quit"
msgstr "終了"

#: ../../Xconfigurator.pm_.c:1077 ../../standalone/drakboot_.c:40
msgid "What do you want to do?"
msgstr "どうしますか？"

#: ../../Xconfigurator.pm_.c:1084
#, c-format
msgid ""
"Keep the changes?\n"
"Current configuration is:\n"
"\n"
"%s"
msgstr ""
"変更を保存しますか?\n"
"現在の設定は以下の通りです:\n"
"\n"
"%s"

#: ../../Xconfigurator.pm_.c:1105
#, c-format
msgid "Please relog into %s to activate the changes"
msgstr "変更を有効にするには %s にログインしなおして下さい"

#: ../../Xconfigurator.pm_.c:1125
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "ログアウトした上で Ctrl-Alt-BackSpace を押して下さい"

#: ../../Xconfigurator.pm_.c:1128
msgid "X at startup"
msgstr "X の起動"

#: ../../Xconfigurator.pm_.c:1129
msgid ""
"I can set up your computer to automatically start X upon booting.\n"
"Would you like X to start when you reboot?"
msgstr ""
"コンピュータをブートした時，自動的に X が立ち上がる設定にできます。\n"
"リブートした時 X を立ち上げますか？"

#: ../../Xconfigurator.pm_.c:1153
msgid "Autologin"
msgstr "自動ログイン"

#: ../../Xconfigurator.pm_.c:1154
msgid ""
"I can set up your computer to automatically log on one user.\n"
"If you don't want to use this feature, click on the cancel button."
msgstr ""
"自動的にユーザがログオンするようにコンピュータを設定できます。\n"
"この機能を望まない場合、キャンセルボタンを押してください。"

#: ../../Xconfigurator.pm_.c:1156
msgid "Choose the default user:"
msgstr "デフォルトユーザの選択:"

#: ../../Xconfigurator.pm_.c:1157
msgid "Choose the window manager to run:"
msgstr "使うウィンドウマネージャを選んで下さい："

#: ../../Xconfigurator_consts.pm_.c:6
msgid "256 colors (8 bits)"
msgstr "256 色(8 bits)"

#: ../../Xconfigurator_consts.pm_.c:7
msgid "32 thousand colors (15 bits)"
msgstr "3万2千色 (15 bits)"

#: ../../Xconfigurator_consts.pm_.c:8
msgid "65 thousand colors (16 bits)"
msgstr "6万5千色 (16 bits)"

#: ../../Xconfigurator_consts.pm_.c:9
msgid "16 million colors (24 bits)"
msgstr "1600万色 (24 bits)"

#: ../../Xconfigurator_consts.pm_.c:10
msgid "4 billion colors (32 bits)"
msgstr "40億色 (32 bits)"

#: ../../Xconfigurator_consts.pm_.c:106
msgid "256 kB"
msgstr "256 KB"

#: ../../Xconfigurator_consts.pm_.c:107
msgid "512 kB"
msgstr "512 KB"

#: ../../Xconfigurator_consts.pm_.c:108
msgid "1 MB"
msgstr "1 MB"

#: ../../Xconfigurator_consts.pm_.c:109
msgid "2 MB"
msgstr "2 MB"

#: ../../Xconfigurator_consts.pm_.c:110
msgid "4 MB"
msgstr "4 MB"

#: ../../Xconfigurator_consts.pm_.c:111
msgid "8 MB"
msgstr "8 MB"

#: ../../Xconfigurator_consts.pm_.c:112
msgid "16 MB or more"
msgstr "16 MB 以上"

#: ../../Xconfigurator_consts.pm_.c:117 ../../Xconfigurator_consts.pm_.c:118
msgid "Standard VGA, 640x480 at 60 Hz"
msgstr "スタンダード VGA, 640x480 at 60Hz"

#: ../../Xconfigurator_consts.pm_.c:119
msgid "Super VGA, 800x600 at 56 Hz"
msgstr "スーパー VGA, 800x600 at 56 Hz"

#: ../../Xconfigurator_consts.pm_.c:120
msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
msgstr "8514 互換, 1024x768 at 87 Hz interlaced (no 800x600)"

#: ../../Xconfigurator_consts.pm_.c:121
msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
msgstr "スーパー VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"

#: ../../Xconfigurator_consts.pm_.c:122
msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
msgstr "拡張 スーパー VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"

#: ../../Xconfigurator_consts.pm_.c:123
msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
msgstr "1024x768 at 60 Hz, 800x600 at 72 HzのノンインターレスSVGA"

#: ../../Xconfigurator_consts.pm_.c:124
msgid "High Frequency SVGA, 1024x768 at 70 Hz"
msgstr "1280x1024 at 70 HzのHigh Frequency SVGA"

#: ../../Xconfigurator_consts.pm_.c:125
msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
msgstr "1280x1024 at 60 Hzが可能なマルチスキャンモニタ"

#: ../../Xconfigurator_consts.pm_.c:126
msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
msgstr "1280x1024 at 74 Hzが可能なマルチスキャンモニタ"

#: ../../Xconfigurator_consts.pm_.c:127
msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
msgstr "1280x1024 at 76 Hzが可能なマルチスキャンモニタ"

#: ../../Xconfigurator_consts.pm_.c:128
msgid "Monitor that can do 1600x1200 at 70 Hz"
msgstr "1600x1200 at 70 Hz が可能なモニタ"

#: ../../Xconfigurator_consts.pm_.c:129
msgid "Monitor that can do 1600x1200 at 76 Hz"
msgstr "1600x1200 at 76 Hz が可能なモニタ"

#: ../../any.pm_.c:91 ../../any.pm_.c:121 ../../any_new.pm_.c:91
#: ../../any_new.pm_.c:121
msgid "First sector of boot partition"
msgstr "ブートパーティションの最初のセクタ"

#: ../../any.pm_.c:91 ../../any.pm_.c:121 ../../any.pm_.c:150
#: ../../any_new.pm_.c:91 ../../any_new.pm_.c:121 ../../any_new.pm_.c:150
msgid "First sector of drive (MBR)"
msgstr "ドライブの最初のセクタ (MBR)"

#: ../../any.pm_.c:95 ../../any_new.pm_.c:95
msgid "SILO Installation"
msgstr "SILO のインストール"

#: ../../any.pm_.c:96 ../../any.pm_.c:102 ../../any_new.pm_.c:96
#: ../../any_new.pm_.c:102
msgid "Where do you want to install the bootloader?"
msgstr "ブートローダをどこにインストールしますか？"

#: ../../any.pm_.c:101 ../../any_new.pm_.c:101
msgid "LILO/grub Installation"
msgstr "LILO/grub のインストール"

#: ../../any.pm_.c:111 ../../any_new.pm_.c:111
#: ../../install_steps_interactive.pm_.c:736
msgid "None"
msgstr "なし"

#: ../../any.pm_.c:111 ../../any_new.pm_.c:111
msgid "Which bootloader(s) do you want to use?"
msgstr "どのブートローダを使いますか"

#: ../../any.pm_.c:125 ../../any_new.pm_.c:125
msgid "Bootloader installation"
msgstr "ブートローダのインストール"

#: ../../any.pm_.c:127 ../../any_new.pm_.c:127
msgid "Boot device"
msgstr "ブートデバイス"

#: ../../any.pm_.c:128 ../../any_new.pm_.c:128
msgid "LBA (doesn't work on old BIOSes)"
msgstr "LBA (古い BIOS では動かない)"

#: ../../any.pm_.c:129 ../../any_new.pm_.c:129
msgid "Compact"
msgstr "コンパクト"

#: ../../any.pm_.c:129 ../../any_new.pm_.c:129
msgid "compact"
msgstr "コンパクト"

#: ../../any.pm_.c:130 ../../any.pm_.c:199 ../../any_new.pm_.c:130
#: ../../any_new.pm_.c:199
msgid "Video mode"
msgstr "ビデオモード"

#: ../../any.pm_.c:132 ../../any_new.pm_.c:132
msgid "Delay before booting default image"
msgstr "デフォルトイメージ起動の待ち時間"

#: ../../any.pm_.c:134 ../../any_new.pm_.c:134
#: ../../install_steps_interactive.pm_.c:764
#: ../../install_steps_interactive.pm_.c:815 ../../netconnect.pm_.c:560
#: ../../netconnect_new.pm_.c:686 ../../printerdrake.pm_.c:94
#: ../../printerdrake.pm_.c:128 ../../standalone/adduserdrake_.c:42
msgid "Password"
msgstr "パスワード"

#: ../../any.pm_.c:135 ../../any_new.pm_.c:135
#: ../../install_steps_interactive.pm_.c:765
#: ../../install_steps_interactive.pm_.c:816
#: ../../standalone/adduserdrake_.c:43
msgid "Password (again)"
msgstr "パスワード (もう一度)"

#: ../../any.pm_.c:136 ../../any_new.pm_.c:136
msgid "Restrict command line options"
msgstr "コマンドラインオプションの制限"

#: ../../any.pm_.c:136 ../../any_new.pm_.c:136
msgid "restrict"
msgstr "制限"

#: ../../any.pm_.c:142 ../../any_new.pm_.c:142
msgid "Bootloader main options"
msgstr "ブートローダのメインオプション"

#: ../../any.pm_.c:145 ../../any_new.pm_.c:145
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"``コマンドラインオプションの制限''オプションはパスワードがないと\n"
"役にたちません。"

#: ../../any.pm_.c:146 ../../any_new.pm_.c:146
#: ../../install_steps_interactive.pm_.c:774
#: ../../install_steps_interactive.pm_.c:829
#: ../../standalone/adduserdrake_.c:56
msgid "Please try again"
msgstr "もう一度試して下さい"

#: ../../any.pm_.c:146 ../../any_new.pm_.c:146
#: ../../install_steps_interactive.pm_.c:774
#: ../../install_steps_interactive.pm_.c:829
#: ../../standalone/adduserdrake_.c:56
msgid "The passwords do not match"
msgstr "パスワードが一致しません"

#: ../../any.pm_.c:157 ../../any_new.pm_.c:157
msgid ""
"Here are the different entries.\n"
"You can add some more or change the existing ones."
msgstr ""
"エントリは以下のとおりです。\n"
"追加・変更できます。"

#: ../../any.pm_.c:165 ../../any_new.pm_.c:165 ../../printerdrake.pm_.c:352
#: ../../standalone/rpmdrake_.c:302
msgid "Add"
msgstr "加える"

#: ../../any.pm_.c:165 ../../any_new.pm_.c:165 ../../diskdrake.pm_.c:46
#: ../../install_steps_interactive.pm_.c:809 ../../netconnect.pm_.c:842
#: ../../netconnect_new.pm_.c:984 ../../printerdrake.pm_.c:352
#: ../../standalone/adduserdrake_.c:36
msgid "Done"
msgstr "終了"

#: ../../any.pm_.c:174 ../../any_new.pm_.c:174
msgid "Which type of entry do you want to add?"
msgstr "どのタイプを追加しますか"

#: ../../any.pm_.c:175 ../../any_new.pm_.c:175
msgid "Linux"
msgstr "Linux"

#: ../../any.pm_.c:175 ../../any_new.pm_.c:175
msgid "Other OS (SunOS...)"
msgstr "他の OS (SunOSなど...)"

#: ../../any.pm_.c:175 ../../any_new.pm_.c:175
msgid "Other OS (windows...)"
msgstr "他の OS (ウィンドウズなど...)"

#: ../../any.pm_.c:196 ../../any_new.pm_.c:196
msgid "Image"
msgstr "イメージ"

#: ../../any.pm_.c:197 ../../any.pm_.c:206 ../../any_new.pm_.c:197
#: ../../any_new.pm_.c:206
msgid "Root"
msgstr "ルート"

#: ../../any.pm_.c:198 ../../any_new.pm_.c:198
msgid "Append"
msgstr "追加"

#: ../../any.pm_.c:200 ../../any_new.pm_.c:200
msgid "Initrd"
msgstr "Initrd"

#: ../../any.pm_.c:201 ../../any_new.pm_.c:201
msgid "Read-write"
msgstr "読み書き"

#: ../../any.pm_.c:208 ../../any_new.pm_.c:208
msgid "Table"
msgstr "テーブル"

#: ../../any.pm_.c:209 ../../any_new.pm_.c:209
msgid "Unsafe"
msgstr "危険"

#: ../../any.pm_.c:215 ../../any_new.pm_.c:215
msgid "Label"
msgstr "ラベル"

#: ../../any.pm_.c:217 ../../any_new.pm_.c:217
msgid "Default"
msgstr "デフォルト"

#: ../../any.pm_.c:220 ../../any_new.pm_.c:220 ../../install_gtk.pm_.c:82
#: ../../install_steps_interactive.pm_.c:762 ../../interactive.pm_.c:76
#: ../../interactive.pm_.c:86 ../../interactive.pm_.c:250
#: ../../interactive_newt.pm_.c:51 ../../interactive_newt.pm_.c:99
#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:243
#: ../../my_gtk.pm_.c:486 ../../my_gtk.pm_.c:661 ../../printerdrake.pm_.c:444
#: ../../printerdrake.pm_.c:464
msgid "Ok"
msgstr "OK"

#: ../../any.pm_.c:220 ../../any_new.pm_.c:220
msgid "Remove entry"
msgstr "エントリを消す"

#: ../../any.pm_.c:223 ../../any_new.pm_.c:223
msgid "Empty label not allowed"
msgstr "空白のラベルは許されていません"

#: ../../any.pm_.c:224 ../../any_new.pm_.c:224
msgid "This label is already used"
msgstr "このラベルはすでに使われています"

#: ../../any.pm_.c:500 ../../any_new.pm_.c:492
#, c-format
msgid "Found %s %s interfaces"
msgstr "%s %s インターフェースが見つかりました"

#: ../../any.pm_.c:501 ../../any_new.pm_.c:493
msgid "Do you have another one?"
msgstr "別のものはありますか？"

#: ../../any.pm_.c:502 ../../any_new.pm_.c:494
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "%s インターフェースはありますか？"

#: ../../any.pm_.c:504 ../../any_new.pm_.c:496 ../../interactive.pm_.c:81
#: ../../my_gtk.pm_.c:485 ../../netconnect.pm_.c:90 ../../netconnect.pm_.c:470
#: ../../netconnect_new.pm_.c:148 ../../netconnect_new.pm_.c:509
#: ../../printerdrake.pm_.c:233
msgid "No"
msgstr "いいえ"

#: ../../any.pm_.c:504 ../../any_new.pm_.c:496 ../../interactive.pm_.c:81
#: ../../my_gtk.pm_.c:485 ../../netconnect.pm_.c:88 ../../netconnect.pm_.c:468
#: ../../netconnect_new.pm_.c:146 ../../netconnect_new.pm_.c:507
msgid "Yes"
msgstr "はい"

#: ../../any.pm_.c:505 ../../any_new.pm_.c:497
msgid "See hardware info"
msgstr "ハードウェアの情報を見て下さい"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: ../../any.pm_.c:522 ../../any_new.pm_.c:533
#, c-format
msgid "Installing driver for %s card %s"
msgstr "%s カード %s のドライバインストール中"

#: ../../any.pm_.c:523 ../../any_new.pm_.c:534
#, c-format
msgid "(module %s)"
msgstr "(モジュール %s)"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: ../../any.pm_.c:534 ../../any_new.pm_.c:545
#, c-format
msgid "Which %s driver should I try?"
msgstr "どの %s ドライバを試しましょうか？"

#: ../../any.pm_.c:542 ../../any_new.pm_.c:553
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"%s ドライバは、正しく動作するのに特別な情報が要る場合があります。ただし\n"
"ふつうは、なにもなしで正常に動く場合がほとんどです。特別なオプションを\n"
"指定しますか？　それともドライバにマシンをプローブさせて必要情報を取得\n"
"させてみますか？　プローブ中にコンピュータが停止するかも知れませんが，\n"
"マシンがこわれたりすることはありません。"

#: ../../any.pm_.c:547 ../../any_new.pm_.c:558
msgid "Autoprobe"
msgstr "オートプローブ"

#: ../../any.pm_.c:547 ../../any_new.pm_.c:558
msgid "Specify options"
msgstr "オプション指定"

#: ../../any.pm_.c:551 ../../any_new.pm_.c:562
#, c-format
msgid "You may now provide its options to module %s."
msgstr "モジュール %s のオプションを指定してください。"

#: ../../any.pm_.c:557 ../../any_new.pm_.c:568
#, c-format
msgid ""
"You may now provide its options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"モジュール %s へのオプションの指定。\n"
"オプションのフォーマットは ``名前=値 名前2=値2 ...'' です。\n"
"例: ``io=0x300 irq=7''"

#: ../../any.pm_.c:560 ../../any_new.pm_.c:571
msgid "Module options:"
msgstr "モジュールのオプション"

#: ../../any.pm_.c:570 ../../any_new.pm_.c:581
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"モジュール %s のロードができませんでした。\n"
"パラメータを変えてやりなおしてみますか？"

# NOTE: this message will be displayed by SILO at boot time; that is
# only the ascii charset will be available
# so use only 7bit for this message
#
#: ../../bootloader.pm_.c:234
#, c-format
msgid ""
"Welcome to %s the operating system chooser!\n"
"\n"
"Choose an operating system in the list above or\n"
"wait %d seconds for default boot.\n"
"\n"
msgstr ""
"%s operating system chooser-he youkosou!\n"
"\n"
"Ichiran kara erande <ENTER> wo oshimasu. %d byou de Default ni narimasu.\n"
"\n"

# NOTE: this message will be displayed by grub at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
# The lines must fit on screen, aka length < 80
# and only one line per string for the GRUB messages
#
#: ../../bootloader.pm_.c:596
msgid "Welcome to GRUB the operating system chooser!"
msgstr "GRUB operating system chooser-he youkosou!"

#: ../../bootloader.pm_.c:597
#, c-format
msgid "Use the %c and %c keys for selecting which entry is highlighted."
msgstr "%c, %c key wo tukatte entry wo shitei shite kudasai."

#: ../../bootloader.pm_.c:598
msgid "Press enter to boot the selected OS, 'e' to edit the"
msgstr "Kono OS wo kidou suru nara Enter, Kidou mae no jikkou command"

#: ../../bootloader.pm_.c:599
msgid "commands before booting, or 'c' for a command-line."
msgstr "no henshuu niha 'e', command line nara 'c' wo oshi masu."

#: ../../bootloader.pm_.c:600
#, c-format
msgid "The highlighted entry will be booted automatically in %d seconds."
msgstr "Sentaku shita OS ga %d byou de jidoutekini kidou shimasu."

#: ../../bootloader.pm_.c:604
msgid "not enough room in /boot"
msgstr "/boot の容量不足です"

#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
#: ../../bootloader.pm_.c:696
msgid "Desktop"
msgstr "デスクトップ"

#: ../../bootloader.pm_.c:696
msgid "Start Menu"
msgstr "スタートメニュー"

#: ../../common.pm_.c:610
#, c-format
msgid "%d minutes"
msgstr "あと %d 分"

#: ../../common.pm_.c:612
msgid "1 minute"
msgstr "あと 1 分"

#: ../../common.pm_.c:614
#, c-format
msgid "%d seconds"
msgstr "あと %d 秒"

#: ../../diskdrake.pm_.c:21 ../../diskdrake.pm_.c:427
msgid "Create"
msgstr "作成"

#: ../../diskdrake.pm_.c:22
msgid "Unmount"
msgstr "アンマウント"

#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:429
msgid "Delete"
msgstr "削除"

#: ../../diskdrake.pm_.c:23
msgid "Format"
msgstr "フォーマット"

#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:610
msgid "Resize"
msgstr "リサイズ"

#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:427
#: ../../diskdrake.pm_.c:480
msgid "Type"
msgstr "タイプ"

#: ../../diskdrake.pm_.c:24 ../../diskdrake.pm_.c:500
msgid "Mount point"
msgstr "マウントポイント"

#: ../../diskdrake.pm_.c:38
msgid "Write /etc/fstab"
msgstr "/etc/fstab を更新"

#: ../../diskdrake.pm_.c:39
msgid "Toggle to expert mode"
msgstr "エキスパートモードに移る"

#: ../../diskdrake.pm_.c:40
msgid "Toggle to normal mode"
msgstr "ノーマルモードに移る"

#: ../../diskdrake.pm_.c:41
msgid "Restore from file"
msgstr "ファイルからリストアする"

#: ../../diskdrake.pm_.c:42
msgid "Save in file"
msgstr "ファイルにセーブする"

#: ../../diskdrake.pm_.c:43
msgid "Wizard"
msgstr "ウィザード"

#: ../../diskdrake.pm_.c:44
msgid "Restore from floppy"
msgstr "フロッピーからリストアする"

#: ../../diskdrake.pm_.c:45
msgid "Save on floppy"
msgstr "フロッピーにセーブする"

#: ../../diskdrake.pm_.c:49
msgid "Clear all"
msgstr "全てをクリア"

#: ../../diskdrake.pm_.c:50
msgid "Format all"
msgstr "全てをフォーマット"

#: ../../diskdrake.pm_.c:51
msgid "Auto allocate"
msgstr "自動割り当て"

#: ../../diskdrake.pm_.c:54
msgid "All primary partitions are used"
msgstr "全てのプライマリパーティションが使われています"

#: ../../diskdrake.pm_.c:54
msgid "I can't add any more partition"
msgstr "これ以上のパーティションは追加できません"

#: ../../diskdrake.pm_.c:54
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"パーティションを増やしたいなら，拡張パーティションが\n"
"作れるようにどこかのパーティションを消して下さい。"

#: ../../diskdrake.pm_.c:57
msgid "Rescue partition table"
msgstr "パーティションテーブルを残す"

#: ../../diskdrake.pm_.c:58
msgid "Undo"
msgstr "もとに戻す"

#: ../../diskdrake.pm_.c:59
msgid "Write partition table"
msgstr "パーティションテーブルを更新"

#: ../../diskdrake.pm_.c:60
msgid "Reload"
msgstr "リロード"

#: ../../diskdrake.pm_.c:101
msgid "loopback"
msgstr "ループバック"

#: ../../diskdrake.pm_.c:114
msgid "Ext2"
msgstr "Ext2"

#: ../../diskdrake.pm_.c:114
msgid "FAT"
msgstr "FAT"

#: ../../diskdrake.pm_.c:114
msgid "HFS"
msgstr "HFS"

#: ../../diskdrake.pm_.c:114
msgid "SunOS"
msgstr "SunOS"

#: ../../diskdrake.pm_.c:114
msgid "Swap"
msgstr "スワップ"

#: ../../diskdrake.pm_.c:115
msgid "Empty"
msgstr "空"

#: ../../diskdrake.pm_.c:115 ../../mouse.pm_.c:125
msgid "Other"
msgstr "その他"

#: ../../diskdrake.pm_.c:121
msgid "Filesystem types:"
msgstr "ファイルシステム タイプ:"

#: ../../diskdrake.pm_.c:130
msgid "Details"
msgstr "詳細"

#: ../../diskdrake.pm_.c:144
msgid ""
"You have one big FAT partition\n"
"(generally used by MicroSoft Dos/Windows).\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"ハードディスク全体が大きな FAT パーティション一つだけですね\n"
"（たぶんMS Dos/ウィンドウズのものです）。\n"
"まずはこいつをリサイズするのがいいでしょう\n"
"（そのパーティションをクリックして、次に「リサイズ」をクリックして下さい)"

#: ../../diskdrake.pm_.c:149
msgid "Please make a backup of your data first"
msgstr "データのバックアップを取って下さい"

#: ../../diskdrake.pm_.c:149 ../../diskdrake.pm_.c:166
#: ../../diskdrake.pm_.c:175 ../../diskdrake.pm_.c:532
#: ../../diskdrake.pm_.c:554
msgid "Read carefully!"
msgstr "よく読んで下さい！"

#: ../../diskdrake.pm_.c:152
msgid ""
"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"もし aboot を使うつもりなら、ディスクの先頭に空き領域 (2048セクタくらい)\n"
"を残すよう気を付けて下さい。"

#: ../../diskdrake.pm_.c:166
msgid "Be careful: this operation is dangerous."
msgstr "注意: この操作は危険です。"

#: ../../diskdrake.pm_.c:203 ../../install_steps.pm_.c:73
#: ../../install_steps_interactive.pm_.c:38
#: ../../install_steps_interactive.pm_.c:315 ../../standalone/diskdrake_.c:60
#: ../../standalone/rpmdrake_.c:294 ../../standalone/rpmdrake_.c:304
msgid "Error"
msgstr "エラー"

#: ../../diskdrake.pm_.c:227 ../../diskdrake.pm_.c:708
msgid "Mount point: "
msgstr "マウントポイント: "

#: ../../diskdrake.pm_.c:228 ../../diskdrake.pm_.c:269
msgid "Device: "
msgstr "デバイス: "

#: ../../diskdrake.pm_.c:229
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS デバイスレター: %s (推定)\n"

#: ../../diskdrake.pm_.c:230 ../../diskdrake.pm_.c:272
msgid "Type: "
msgstr "タイプ: "

#: ../../diskdrake.pm_.c:231
#, c-format
msgid "Start: sector %s\n"
msgstr "開始: セクタ %s\n"

#: ../../diskdrake.pm_.c:232
#, c-format
msgid "Size: %d MB"
msgstr "サイズ: %d MB"

#: ../../diskdrake.pm_.c:234
#, c-format
msgid ", %s sectors"
msgstr ", %s セクタ"

#: ../../diskdrake.pm_.c:236
#, c-format
msgid "Cylinder %d to cylinder %d\n"
msgstr "シリンダ %d からシリンダ %d\n"

#: ../../diskdrake.pm_.c:237
msgid "Formatted\n"
msgstr "フォーマット済み\n"

#: ../../diskdrake.pm_.c:238
msgid "Not formatted\n"
msgstr "未フォーマット\n"

#: ../../diskdrake.pm_.c:239
msgid "Mounted\n"
msgstr "マウント済み\n"

#: ../../diskdrake.pm_.c:240
#, c-format
msgid "RAID md%s\n"
msgstr "RAID md%s\n"

#: ../../diskdrake.pm_.c:241
#, c-format
msgid "Loopback file(s): %s\n"
msgstr "ループバックファイル: %s\n"

#: ../../diskdrake.pm_.c:242
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"デフォルトでパーティションブート\n"
"    (MS-DOS のブート, lilo ではない)\n"

#: ../../diskdrake.pm_.c:244
#, c-format
msgid "Level %s\n"
msgstr "レベル %s\n"

#: ../../diskdrake.pm_.c:245
#, c-format
msgid "Chunk size %s\n"
msgstr "チャンクサイズ %s\n"

#: ../../diskdrake.pm_.c:246
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAIDディスク %s\n"

#: ../../diskdrake.pm_.c:248
#, c-format
msgid "Loopback file name: %s"
msgstr "ループバックファイル名: %s"

#: ../../diskdrake.pm_.c:265
msgid "Please click on a partition"
msgstr "変更するパーティションをクリックしてください"

#: ../../diskdrake.pm_.c:270
#, c-format
msgid "Size: %d MB\n"
msgstr "サイズ: %d MB\n"

#: ../../diskdrake.pm_.c:271
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "ジオメトリ: %s シリンダ, %s ヘッド, %s セクタ\n"

#: ../../diskdrake.pm_.c:273
#, c-format
msgid "Partition table type: %s\n"
msgstr "パーティションテーブルタイプ: %s\n"

#: ../../diskdrake.pm_.c:274
#, c-format
msgid "on bus %d id %d\n"
msgstr "バス %d id %d\n"

#: ../../diskdrake.pm_.c:290
msgid "Mount"
msgstr "マウント"

#: ../../diskdrake.pm_.c:292
msgid "Active"
msgstr "アクティブ"

#: ../../diskdrake.pm_.c:294
msgid "Add to RAID"
msgstr "RAID に加える"

#: ../../diskdrake.pm_.c:296
msgid "Remove from RAID"
msgstr "RAID から除く"

#: ../../diskdrake.pm_.c:298
msgid "Modify RAID"
msgstr "RAIDの変更"

#: ../../diskdrake.pm_.c:300
msgid "Use for loopback"
msgstr "ループバックの使用"

#: ../../diskdrake.pm_.c:307
msgid "Choose action"
msgstr "動作を選択"

#: ../../diskdrake.pm_.c:400
msgid ""
"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
"1024).\n"
"Either you use LILO and it won't work, or you don't use LILO and you don't "
"need /boot"
msgstr ""
"ごめんなさい，そこはドライブのかなり奥のほう(シリンダ>1024)なので\n"
"そこに /boot は作れません。/bootがそこだと、LILO がうまく働かないし，\n"
"LILO を使わないなら /boot は要りませんから"

#: ../../diskdrake.pm_.c:404
msgid ""
"The partition you've selected to add as root (/) is physically located "
"beyond\n"
"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
"If you plan to use the LILO boot manager, be careful to add a /boot partition"
msgstr ""
"いまルート(/)用に選んだパーティションは，物理的にドライブの先頭から\n"
"1024 シリンダより遠くにあって，さらにあなたは/boot パーティションを\n"
"持っていませんね。LILO をブートマネージャに使うなら，/boot パーティ\n"
"ションの追加をお忘れなく。"

#: ../../diskdrake.pm_.c:410
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"So be careful to add a /boot partition"
msgstr ""
"あなたはルート(/)ととしてソフトウェアRAIDパーティションを選びましたね。\n"
"/boot パーティション無しでこれを操作出来るブートローダはありません。\n"
"ですから /boot パーティションの追加をお忘れなく。"

#: ../../diskdrake.pm_.c:427 ../../diskdrake.pm_.c:429
#, c-format
msgid "Use ``%s'' instead"
msgstr "代わりに ``%s'' を使って下さい"

#: ../../diskdrake.pm_.c:432
msgid "Use ``Unmount'' first"
msgstr "最初に ``Unmount`` を使って下さい"

#: ../../diskdrake.pm_.c:433 ../../diskdrake.pm_.c:475
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"パーティションの型を %s "
"に変更した後、このパーティション上のデータは失われます"

#: ../../diskdrake.pm_.c:445
msgid "Continue anyway?"
msgstr "それでも続けますか？"

#: ../../diskdrake.pm_.c:450
msgid "Quit without saving"
msgstr "セーブせず終了"

#: ../../diskdrake.pm_.c:450
msgid "Quit without writing the partition table?"
msgstr "パーティションテーブルを更新せずに終了？"

#: ../../diskdrake.pm_.c:478
msgid "Change partition type"
msgstr "パーティションタイプの変更"

#: ../../diskdrake.pm_.c:479
msgid "Which filesystem do you want?"
msgstr "どのファイルシステムにしますか？"

#: ../../diskdrake.pm_.c:482 ../../diskdrake.pm_.c:740
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr "32MB以下のパーティションに ReiserFS は使えません"

#: ../../diskdrake.pm_.c:498
#, c-format
msgid "Where do you want to mount loopback file %s?"
msgstr "ループバックファイル %s をどこにマウントしますか？"

#: ../../diskdrake.pm_.c:499
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "デバイス %s をどこにマウントしますか？"

#: ../../diskdrake.pm_.c:504
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"このパーティションはループバックで使われているので、\n"
"マウントポイントから取り就くことが出来ません。\n"
"まずループバックを解除してください。"

#: ../../diskdrake.pm_.c:523
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "フォーマットしたら、パーティション %s 上のデータは失われます。"

#: ../../diskdrake.pm_.c:525
msgid "Formatting"
msgstr "フォーマット中"

#: ../../diskdrake.pm_.c:526
#, c-format
msgid "Formatting loopback file %s"
msgstr "ループバックファイル %s をフォーマット中"

#: ../../diskdrake.pm_.c:527 ../../install_steps_interactive.pm_.c:402
#, c-format
msgid "Formatting partition %s"
msgstr "パーティション %s をフォーマット中"

#: ../../diskdrake.pm_.c:532
msgid "After formatting all partitions,"
msgstr "全てのパーティションをフォーマットした後,"

#: ../../diskdrake.pm_.c:532
msgid "all data on these partitions will be lost"
msgstr "これらのパーティション中のデータは失われます"

#: ../../diskdrake.pm_.c:538
msgid "Move"
msgstr "移動"

#: ../../diskdrake.pm_.c:539
msgid "Which disk do you want to move it to?"
msgstr "どのディスクに移動しますか?"

#: ../../diskdrake.pm_.c:540
msgid "Sector"
msgstr "セクタ"

#: ../../diskdrake.pm_.c:541
msgid "Which sector do you want to move it to?"
msgstr "どのセクタを移動しますか？"

#: ../../diskdrake.pm_.c:544
msgid "Moving"
msgstr "移動中"

#: ../../diskdrake.pm_.c:544
msgid "Moving partition..."
msgstr "パーティションを移動中..."

#: ../../diskdrake.pm_.c:554
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "ドライブ %s のパーティションテーブルをディスクに書き込みます！"

#: ../../diskdrake.pm_.c:556
msgid "You'll need to reboot before the modification can take place"
msgstr "リブートしてパーティションテーブルの変更を反映させる必要があります"

#: ../../diskdrake.pm_.c:577
msgid "Computing FAT filesystem bounds"
msgstr "fat ファイルシステムの境界を計算"

#: ../../diskdrake.pm_.c:577 ../../diskdrake.pm_.c:637
#: ../../install_interactive.pm_.c:107
msgid "Resizing"
msgstr "リサイズ中"

#: ../../diskdrake.pm_.c:600
msgid "This partition is not resizeable"
msgstr "このパーティションはリサイズできません"

#: ../../diskdrake.pm_.c:605
msgid "All data on this partition should be backed-up"
msgstr "このパーティション上のデータはバックアップするべきです"

#: ../../diskdrake.pm_.c:607
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "リサイズ後には、パーティション %s 上のデータは失われます"

#: ../../diskdrake.pm_.c:617
msgid "Choose the new size"
msgstr "新しいサイズを選択"

#: ../../diskdrake.pm_.c:617 ../../install_steps_graphical.pm_.c:287
#: ../../install_steps_graphical.pm_.c:334
#: ../../install_steps_interactive.pm_.c:518
#: ../../partition_table_raw.pm_.c:101
msgid "MB"
msgstr "MB"

#: ../../diskdrake.pm_.c:674
msgid "Create a new partition"
msgstr "新しいパーティションを作成"

#: ../../diskdrake.pm_.c:700
msgid "Start sector: "
msgstr "開始セクタ: "

#: ../../diskdrake.pm_.c:704 ../../diskdrake.pm_.c:779
msgid "Size in MB: "
msgstr "MB でのサイズ: "

#: ../../diskdrake.pm_.c:707 ../../diskdrake.pm_.c:782
msgid "Filesystem type: "
msgstr "ファイルシステムタイプ: "

#: ../../diskdrake.pm_.c:710
msgid "Preference: "
msgstr "プリファレンス: "

#: ../../diskdrake.pm_.c:758
msgid "This partition can't be used for loopback"
msgstr "このパーティションはループバックには使えません"

#: ../../diskdrake.pm_.c:768
msgid "Loopback"
msgstr "ループバック"

#: ../../diskdrake.pm_.c:778
msgid "Loopback file name: "
msgstr "ループバックファイル名: "

#: ../../diskdrake.pm_.c:804
msgid "File already used by another loopback, choose another one"
msgstr "ファイルはすでに別のループバックで使用中。他のを選びましょう"

#: ../../diskdrake.pm_.c:805
msgid "File already exists. Use it?"
msgstr "ファイルはすでに存在します。いまあるのを使いますか？"

#: ../../diskdrake.pm_.c:827 ../../diskdrake.pm_.c:843
msgid "Select file"
msgstr "ファイルを選択"

#: ../../diskdrake.pm_.c:836
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"バックアップするパーティションテーブルのサイズが違います\n"
"続けますか？"

#: ../../diskdrake.pm_.c:844
msgid "Warning"
msgstr "警告"

#: ../../diskdrake.pm_.c:845
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"フロッピーをドライブに挿入してください\n"
"フロッピー上の全てのデータは失われます"

#: ../../diskdrake.pm_.c:856
msgid "Trying to rescue partition table"
msgstr "パーティションテーブルを救出してみす"

#: ../../diskdrake.pm_.c:867
msgid "device"
msgstr "デバイス"

#: ../../diskdrake.pm_.c:868
msgid "level"
msgstr "レベル"

#: ../../diskdrake.pm_.c:869
msgid "chunk size"
msgstr "チャンクサイズ"

#: ../../diskdrake.pm_.c:881
msgid "Choose an existing RAID to add to"
msgstr "追加する既存の RAID を選んで下さい"

#: ../../diskdrake.pm_.c:882
msgid "new"
msgstr "新規"

#: ../../fs.pm_.c:88 ../../fs.pm_.c:95 ../../fs.pm_.c:101 ../../fs.pm_.c:107
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s フォーマット, %s 失敗"

#: ../../fs.pm_.c:133
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr "%s を タイプ %s でフォーマットする方法を知りません"

#: ../../fs.pm_.c:218
msgid "mount failed: "
msgstr "マウントに失敗: "

#: ../../fs.pm_.c:230
#, c-format
msgid "error unmounting %s: %s"
msgstr "%s をアンマウント中にエラー: %s"

#: ../../fsedit.pm_.c:235
msgid "Mount points must begin with a leading /"
msgstr "マウントポイントは / で始まる必要があります"

#: ../../fsedit.pm_.c:238
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "パーティションはマウントポイント %s にマウント済み\n"

#: ../../fsedit.pm_.c:246
#, c-format
msgid "Circular mounts %s\n"
msgstr "巡回マウント %s\n"

#: ../../fsedit.pm_.c:258
msgid "This directory should remain within the root filesystem"
msgstr "このディレクトリは root ファイルシステム内に残してください"

#: ../../fsedit.pm_.c:259
msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
msgstr ""
"このマウントポイントには、実在するファイルシステム (ext2, reiserfs) \n"
"が必要です。\n"

#: ../../fsedit.pm_.c:335
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "書き込みのため %s を開くときエラーが発生: %s"

#: ../../fsedit.pm_.c:417
msgid ""
"An error has occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"エラー発生 - 新しいファイルシステムを構築できるようなデバイスが\n"
"見付かりません。なにが原因か、ハードウェアをチェックしてください"

#: ../../fsedit.pm_.c:431
msgid "You don't have any partitions!"
msgstr "パーティションがありません！"

#: ../../help.pm_.c:9
msgid ""
"Please choose your preferred language for installation and system usage."
msgstr "インストールの時とシステム利用時に使いたい言語を選んでください。"

#: ../../help.pm_.c:12
msgid ""
"You need to accept the terms of the above license to continue installation.\n"
"\n"
"\n"
"Please click on \"Accept\" if you agree with its terms.\n"
"\n"
"\n"
"Please click on \"Refuse\" if you disagree with its terms. Installation will "
"end without modifying your current\n"
"configuration."
msgstr ""
"インストールを続けるには、上のライセンスの条項に同意してください。\n"
"\n"
"\n"
"条項に同意するなら「同意する」をクリックしましょう。\n"
"\n"
"\n"
"同意できなければ「拒否」を選びます。インストールは終了し、現在の設定は\n"
"そのままです"

#: ../../help.pm_.c:22
msgid "Choose the layout corresponding to your keyboard from the list above"
msgstr "上のリストから、自分のキーボード配置を選んでください。"

#: ../../help.pm_.c:25
msgid ""
"If you wish other languages (than the one you choose at\n"
"beginning of installation) will be available after installation, please "
"chose\n"
"them in list above. If you want select all, you just need to select \"All\"."
msgstr ""
"ほかのことば（インストール開始時に選んだのとは別のことば）を望む\n"
"なら、上の一覧から選んでください。全部選ぶときには、「全部」を\n"
"選べばだいじょうぶです。"

#: ../../help.pm_.c:30
msgid ""
"Please choose \"Install\" if there are no previous version of "
"Linux-Mandrake\n"
"installed or if you wish to use several operating systems.\n"
"\n"
"\n"
"Please choose \"Update\" if you wish to update an already installed version "
"of Linux-Mandrake.\n"
"\n"
"\n"
"Depend of your knowledge in GNU/Linux, you can choose one of the following "
"levels to install or update your\n"
"Linux-Mandrake operating system:\n"
"\n"
"\t* Recommanded: if you have never installed a GNU/Linux operating system "
"choose this. Installation will be\n"
"\t  be very easy and you will be asked only on few questions.\n"
"\n"
"\n"
"\t* Customized: if you are familiar enough with GNU/Linux, you may choose "
"the primary usage (workstation, server,\n"
"\t  development) of your sytem. You will need to answer to more questions "
"than in \"Recommanded\" installation\n"
"\t  class, so you need to know how GNU/Linux works to choose this "
"installation class.\n"
"\n"
"\n"
"\t* Expert: if you have a good knowledge in GNU/Linux, you can choose this "
"installation class. As in \"Customized\"\n"
"\t  installation class, you will be able to choose the primary usage "
"(workstation, server, development). Be very\n"
"\t  careful before choose this installation class. You will be able to "
"perform a higly customized installation.\n"
"\t  Answer to some questions can be very difficult if you haven't a good "
"knowledge in GNU/Linux. So, don't choose\n"
"\t  this installation class unless you know what you are doing."
msgstr ""
"古いバージョンのLinux-Mandrakeがインストールされていないか、複数の OS\n"
"を並行して使う場合には、「インストール」を選びましょう。\n"
"\n"
"\n"
"古いLinux-Mandrakeを更新したいのなら「更新」を選びます。\n"
"\n"
"\n"
"GNU/Linux への習熟度に応じて、以下のインストール・更新レベルが\n"
"選べます:\n"
"\n"
"\t* 推奨: GNU/Linux \t  "
"のインストールは初めて、という人はこれを選んでください。\n"
"\t  うるさい質問もあまりあるく、とても簡単にインストールできます。\n"
"\n"
"\n"
"\t* カスタマイズ: GNU/Linux のことをよく知っている人は、システムの\n"
"\t  主な使い方を選んでください（ワークステーション、サーバ、開発）。\n"
"\t  「推奨」よりはたくさん質問に答えることになるので、このクラスを\n"
"\t  選ぶには GNU/Linux の仕組みについて知識がいります。\n"
"\n"
"\n"
"\t* エキスパート: GNU/Linux に詳しい人は、このインストールクラスを\n"
"\t  選べます。「カスタマイズ」と同じく、主あ併箸な（ワークステーション、\n"
"\t  サーバ、開発）を選べます。このインストールクラスを選ぶ前に\n"
"\t  よく考えてください。きわめてカスタム化したインストールができます。\n"
"\t  GNU/Linuxについてよほど詳しくないと、なかなか答えられない質問が\n"
"\t  あります。わかった人以外は、このクラスは選ばないこと。"

#: ../../help.pm_.c:56
msgid ""
"Select:\n"
"\n"
"  - Customized: If you are familiar enough with GNU/Linux, you may then "
"choose\n"
"    the primary usage for your machine. See below for details.\n"
"\n"
"\n"
"  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
"    perform a highly customized installation. As for a \"Customized\"\n"
"    installation class, you will be able to select the usage for your "
"system.\n"
"    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
"DOING!"
msgstr ""
"選択:\n"
"\n"
"  - カスタマイズ: GNU/Linux に詳しければ、自分のマシンの主な使い方に\n"
"    あわせて選びましょう。詳しくは以下を参照してください。\n"
"\n"
"\n"
"  - エキスパート: これは本当にGNU/Linuxに詳しい人が、非常に特殊な\n"
"    インストールをしたい場合に選びます。「カスタマイズ」\n"
"    のインストールと同じく、自分のシステムの使い方を選べます。\n"
"    でも、完全に自信がないなら、絶対にこれは使わないでください！"

#: ../../help.pm_.c:68
msgid ""
"You must now define your machine usage. Choices are:\n"
"\n"
"\t* Workstation: this the ideal choice if you intend to use your machine "
"primarily for everyday use, at office or\n"
"\t  at home.\n"
"\n"
"\n"
"\t* Development: if you intend to use your machine primarily for software "
"development, it is the good choice. You\n"
"\t  will then have a complete collection of software installed in order to "
"compile, debug and format source code,\n"
"\t  or create software packages.\n"
"\n"
"\n"
"\t* Server: if you intend to use this machine as a server, it is the good "
"choice. Either a file server (NFS or\n"
"\t  SMB), a print server (Unix style or Microsoft Windows style), an "
"authentication server (NIS), a database\n"
"\t  server and so on. As such, do not expect any gimmicks (KDE, GNOME, etc.) "
"to be installed."
msgstr ""
"マシンの使い方の選択肢（これはつまり、あなたがインストールの選択で\n"
"「カスタム」か「エキスパート」を選んだら使います）は以下の通り:\n"
"\n"
"\n"
"  - ワークステーション: マシンを主にデスクトップの一般利用で使うな\n"
"    ら、これを選んでください。オフィス業務、画像の編集などでマシン\n"
"    を使う場合にはこれです。コンパイラや開発用のユーティリティは入\n"
"    れません。\n"
"\n"
"\n"
"  - 開発用: 名前のとおり。このマシンを主にソフト開発で使うのなら、\n"
"    これを選んでください。ソースコードをコンパイル、デバッグ、整形\n"
"    したり、ソフトパッケージを作ったりするのに使うソフト集がすべて\n"
"    インストールされます。\n"
"\n"
"\n"
"  - サーバ用: Linux-Mandrakeをインストールしようとしているマシンを、\n"
"    サーバ専用で使うつもりならこれです。ファイルサーバ (NFSやSMB)、\n"
"    プリンタサーバ（Unixのlp (ラインプリンタ) プロトコルかウィンドウズ\n"
"    式のSMB経由の印刷)、認証サーバ (NIS)、データベースサーバなどです。\n"
"    この場合には、KDEやGNOMEなどのこざかしい代物はインストールしません。"

#: ../../help.pm_.c:84
msgid ""
"DrakX will attempt to look for PCI SCSI adapter(s). If DrakX\n"
"finds an SCSI adapter and knows which driver to use, it will be "
"automatically\n"
"installed.\n"
"\n"
"\n"
"If you have no SCSI adapter, an ISA SCSI adapter or a PCI SCSI adapter that\n"
"DrakX doesn't recognize, you will be asked if a SCSI adapter is present in "
"your\n"
"system. If there is no adapter present, you can click on \"No\". If you "
"click on\n"
"\"Yes\", a list of drivers will be presented from which you can select your\n"
"specific adapter.\n"
"\n"
"\n"
"If you have to manually specify your adapter, DrakX will ask if you want to\n"
"specify options for it. You should allow DrakX to probe the hardware for "
"the\n"
"options. This usually works well.\n"
"\n"
"\n"
"If not, you will need to provide options to the driver. Please review the "
"User\n"
"Guide (chapter 3, section \"Collective informations on your hardware) for "
"hints\n"
"on retrieving this information from hardware documentation, from the\n"
"manufacturer's Web site (if you have Internet access) or from Microsoft "
"Windows\n"
"(if you have it on your system)."
msgstr ""
"DrakXはPCI SCSIアダプタを検出しようとします。\n"
"もしDrakXがSCSIアダプタをみつけ、どのドライバを使えばいいかを知っていれば、\n"
"自動的にドライバをインストールします。\n"
"\n"
"\n"
"もしSCSIアダプタがないか、ISA SCSIアダプタか、または\n"
"DrakXが認識しないPCI SCSIアダプタだった場合、 SCSIアダプタがシステム\n"
"にあるかを尋ねられます。システムにアダプタがなければ\n"
"'No'をクリックしてください。 'Yes'をクリックすると、\n"
"アダプタのドライバ一覧を表示するので、そこから選びましょう。\n"
"\n"
"\n"
"もし手動でアダプタを指定した場合には、DrakXはオプション指定をしたいかどうか\n"
"質問してきます。DrakXにハードウェアをプローブさせて、オプションを決めさせ\n"
"ましょう。たいていこれでうまく働きます。\n"
"\n"
"もしダメなら、ドライバに自分でオプションを与える必要があります。\n"
"ユーザガイド (3章, \"ハードウェアについての情報収集) から、これに関わる\n"
"情報をハードのマニュアルやメーカー Web サイト（ネットにアクセスできれば）\n"
"あるいは（システム上にあれば）MS Windows からどうやって必要情報を得るか\n"
"を調べてください。"

#: ../../help.pm_.c:108
msgid ""
"At this point, you need to choose where to install your\n"
"Linux-Mandrake operating system on your hard drive. If it is empty or if an\n"
"existing operating system uses all the space available on it, you need to\n"
"partition it. Basically, partitioning a hard drive consists of logically\n"
"dividing it to create space to install your new Linux-Mandrake system.\n"
"\n"
"\n"
"Because the effects of the partitioning process are usually irreversible,\n"
"partitioning can be intimidating and stressful if you are an inexperienced "
"user.\n"
"This wizard simplifies this process. Before beginning, please consult the "
"manual\n"
"and take your time.\n"
"\n"
"\n"
"You need at least two partitions. One is for the operating system itself and "
"the\n"
"other is for the virtual memory (also called Swap).\n"
"\n"
"\n"
"If partitions have been already defined (from a previous installation or "
"from\n"
"another partitioning tool), you just need choose those to use to install "
"your\n"
"Linux system.\n"
"\n"
"\n"
"If partitions haven't been already defined, you need to create them. \n"
"To do that, use the wizard available above. Depending of your hard drive\n"
"configuration, several solutions can be available:\n"
"\n"
"\t* Use existing partition: the wizard has detected one or more existing "
"Linux partitions on your hard drive. If\n"
"\t  you want to keep them, choose this option. \n"
"\n"
"\n"
"\t* Erase entire disk: if you want delete all data and all partitions "
"present on your hard drive and replace them by\n"
"\t  your new Linux-Mandrake system, you can choose this option. Be careful "
"with this solution, you will not be\n"
"\t  able to revert your choice after confirmation.\n"
"\n"
"\n"
"\t* Use the free space on the Windows partition: if Microsoft Windows is "
"installed on your hard drive and takes\n"
"\t  all space available on it, you have to create free space for Linux data. "
"To do that you can delete your\n"
"\t  Microsoft Windows partition and data (see \"Erase entire disk\" or "
"\"Expert mode\" solutions) or resize your\n"
"\t  Microsoft Windows partition. Resizing can be performed without loss of "
"any data. This solution is\n"
"\t  recommended if you want use both Linux-Mandrake and Microsoft Windows on "
"same computer.\n"
"\n"
"\n"
"\t  Before choosing this solution, please understand that the size of your "
"Microsoft\n"
"\t  Windows partition will be smaller than at present time. It means that "
"you will have less free space under\n"
"\t  Microsoft Windows to store your data or install new software.\n"
"\n"
"\n"
"\t* Expert mode: if you want to partition manually your hard drive, you can "
"choose this option. Be careful before\n"
"\t  choosing this solution. It is powerful but it is very dangerous. You can "
"lose all your data very easily. So,\n"
"\t  don't choose this solution unless you know what you are doing."
msgstr ""
"さてこんどは、ハードディスク上でLinux-Mandrake OS をどこにインストール\n"
"するか選ぶことになります。もしハードディスクが空か、すでに別の OS が\n"
"スペースを全部使ってしまっていたら、パーティションを切ってやる必要が\n"
"あります。一言で、パーティションを切るというのは、ハードディスクを論理\n"
"的に区切ってやることです。そうやって、新しく Linux-Mandrake システムを\n"
"インストールする区切りをこしらえてやるわけです。\n"
"\n"
"\n"
"パーティションを切るのは、やりなおしや後戻りがききません。だから\n"
"初心者にはおっかないし、気疲れする作業ではあります。\n"
"このウィザードはプロセスを簡単にするためのものです。始める前に、\n"
"マニュアルをじっくり読んでください。\n"
"\n"
"\n"
"最低でも二つのパーティションが要ります。一つはシステムそのもの用で\n"
"もう一つは仮想メモリ（またはスワップ）用です。\n"
"\n"
"\n"
"もしすでにパーティションを定義してあるなら（たとえば以前にインストール\n"
"したとか別のツールを使ったとか）、Mandrake-Linuxでそれを使うよう選択\n"
"すればすみます。\n"
"\n"
"\n"
"パーティションがまだ定義されていなければ、新しく作りましょう。\n"
"それには、上で用意したウィザードを使ってください。ハードディスクの設定\n"
"に応じて、いくつかやり方があります:\n"
"\n"
"\t* 既存パーティションを使う: ウィザードが既存のLinux \t  "
"パーティションをディスク上で見つけました。\n"
"\t  もしこれを使うなら、このオプションを選びます。\n"
"\n"
"\n"
"\t* ディスク全体を消去: ハードドライブ上の全データやパーティションを\n"
"\t  消去して、新しく Linux-Mandrake で上書きしたければ、このオプションを\n"
"\t  選びましょう。この場合、慎重にしてください。いったん確認ボタンを\n"
"\t  押したら、もうやりなおしはききません。\n"
"\n"
"\n"
"\t* ウィンドウズの空き部分を使う: ハードディスクにウィンドウズが\n"
"\t  インストールされていて、ディスク全体を使っているなら、\n"
"\t  Linux のデータ用に空きをつくる必要があります。これには、\n"
"\t  ウィンドウズを消してしまってもいいですし（上の「全ディスク消去」\n"
"\t  か「エキスパートモード」を見てください）、ウィンドウズの\n"
"\t  パーティションをリサイズする方法もあります。リサイズの場合、\n"
"\t  データはすべて残ります。 Linux-Mandrake とウィンドウズを同じ\n"
"\t  マシンで使いたければこれがお奨めです。\n"
"\n"
"\n"
"\t  この方法を選ぶ前に、これをやるとウィンドウズのパーティションは\n"
"\t  前より小さくなるのは承知しておいてください。\n"
"\t  つまり、ウィンドウズのほうでは、データを保存したり新しいソフトを\n"
"\t  インストールするときに、使える空きが少なくなるわけです。\n"
"\n"
"\n"
"\t* エキスパートモード: ハードディスクを手動でパーティションしたければ、\n"
"\t  このオプションを選びましょう。でも、注意してください。強力なだけに、\n"
"\t  "
"危険な選択でもあります。ディスク上の全データをあっさり消してしまえます。\n"
"\t  よくよくわかったうえでなければ、これは選ばないでください。"

#: ../../help.pm_.c:160
msgid ""
"At this point, you need to choose what\n"
"partition(s) to use to install your new Linux-Mandrake system. If "
"partitions\n"
"have been already defined (from a previous installation of GNU/Linux or "
"from\n"
"another partitioning tool), you can use existing partitions. In other "
"cases,\n"
"hard drive partitions must be defined.\n"
"\n"
"\n"
"To create partitions, you must first select a hard drive. You can select "
"the\n"
"disk for partitioning by clicking on \"hda\" for the first IDE drive, "
"\"hdb\" for\n"
"the second or \"sda\" for the first SCSI drive and so on.\n"
"\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
"   * Clear all: this option deletes all partitions available on the selected "
"hard drive.\n"
"\n"
"\n"
"   * Auto allocate:: this option allows you to automatically create Ext2 and "
"swap partitions in free space of your\n"
"     hard drive.\n"
"\n"
"\n"
"   * Rescue partition table: if your partition table is damaged, you can try "
"to recover it using this option. Please\n"
"     be careful and remember that it can fail.\n"
"\n"
"\n"
"   * Undo: you can use this option to cancel your changes.\n"
"\n"
"\n"
"   * Reload: you can use this option if you wish to undo all changes and "
"load your initial partitions table\n"
"\n"
"\n"
"   * Wizard: If you wish to use a wizard to partition your hard drive, you "
"can use this option. It is recommended if\n"
"     you do not have a good knowledge in partitioning.\n"
"\n"
"\n"
"   * Restore from floppy: if you have saved your partition table on a floppy "
"during a previous installation, you can\n"
"     recover it using this option.\n"
"\n"
"\n"
"   * Save on floppy: if you wish to save your partition table on a floppy to "
"be able to recover it, you can use this\n"
"     option. It is strongly recommended to use this option\n"
"\n"
"\n"
"   * Done: when you have finished partitioning your hard drive, use this "
"option to save your changes.\n"
"\n"
"\n"
"For information, you can reach any option using the keyboard: navigate "
"trough the partitions using Tab and Up/Down arrows.\n"
"\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
"           * Ctrl-c to create a new partition (when a empty partition is "
"selected)\n"
"\n"
"           * Ctrl-d to delete a partition\n"
"\n"
"           * Ctrl-m to set the mount point"
msgstr ""
"さてここで、新しい Linux-Mandrake システムの\n"
"インストールにどのパーティションを使うか指定します。もし\n"
"パーティションが定義済みなら（前に GNU/Linux をインストールした\n"
"ことがあったり別のツールを使ったりした場合）、それをそのまま使う\n"
"こともできます。それ以外は、パーティション定義が必要です。\n"
"\n"
"\n"
"パーティションをつくるには、まずハードディスクを選びます。もし\n"
"最初の IDE ドライブを選ぶなら「hda」、二番目の IDE なら「hdb」、\n"
"最初の SCSI ディスクなら「sda」という具合に選びます。\n"
"\n"
"\n"
"ハードディスクのパーティションを切るには、以下のオプションが使えます:\n"
"\n"
"   * 全消去: 選んだハードディスク上の全パーティションを消去します。\n"
"\n"
"\n"
"   * 自動割り当て: ハードディスクの空き部分に、自動的に Ext2 と\n"
"     スワップパーティションをつくります。\n"
"\n"
"\n"
"   * レスキューパーティションテーブル: パーティションテーブルが破壊され\n"
"     たら、このオプションでそれを修復してみることができます。\n"
"     慎重に使って、これが万能でないことは承知しておいてください。\n"
"\n"
"\n"
"   * 取り消し: 変更を取り消します。\n"
"\n"
"\n"
"   * リロード: "
"変更を全部取り消して、最初のパーティションテーブルを読み込みます。\n"
"\n"
"\n"
"   * ウィザード: ハードディスクのパーティションウィザードを使うときの\n"
"     オプションです。パーティションについての知識がない人は、これが\n"
"     お奨めです。\n"
"\n"
"\n"
"   * フロッピーから回復: 以前のインストールで、パーティションテーブルを\n"
"     フロッピーに保存これでそれを回復できます。\n"
"\n"
"\n"
"   * フロッピーに保存: 回復用にパーティションテーブルをフロッピーに\n"
"     保存したいときに使います。これを使うよう強くお奨めします。\n"
"\n"
"\n"
"   * 完了: ハードディスクのパーティション切りが終わったら、このオプションを\n"
"     使って変更を保存します。\n"
"\n"
"\n"
"参考までに、キーボードから各オプションが選べます。タブと上下矢印を使って\n"
"パーティションを選びましょう。\n"
"\n"
"\n"
"パーティションを選んだら、以下が使えます:\n"
"\n"
"     * Ctrl-c：新規パーティションをつくる（空のパーティションを選んだとき)\n"
"\n"
"     * Ctrl-d：パーティション削除\n"
"\n"
"     * Ctrl-m：マウントポイントをセット"

#: ../../help.pm_.c:218
msgid ""
"Above are listed the existing Linux partitions detected on\n"
"your hard drive. You can keep choices make by the wizard, they are good for "
"a\n"
"common usage. If you change these choices, you must at least define a root\n"
"partition (\"/\"). Don't choose a too little partition or you will not be "
"able\n"
"to install enough software. If you want store your data on a separate "
"partition,\n"
"you need also to choose a \"/home\" (only possible if you have more than "
"one\n"
"Linux partition available).\n"
"\n"
"\n"
"For information, each partition is listed as follows: \"Name\", "
"\"Capacity\".\n"
"\n"
"\n"
"\"Name\" is coded as follow: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and "
"\"sd\"\n"
"if it is an SCSI hard drive.\n"
"\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE "
"hard drives:\n"
"\n"
"   * \"a\" means \"master hard drive on the primary IDE controller\",\n"
"\n"
"   * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
"\n"
"   * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
"\n"
"   * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"\n"
"With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means "
"\"secondary hard drive\", etc..."
msgstr ""
"ハードディスク上に検出された、既存の Linux パーティションを上に\n"
"示します。ウィザードの選択をそのままにしておいてもいいでしょう。\n"
"通常の利用には問題ありません。選択を変えたら、最低でも root\n"
"パーティション (\"/\")を指定してください。あまり小さいパーティション\n"
"をここで選ぶと、ソフトが入り切らなくなりますよ。また、データを別の\n"
"パーティションに起きたければ、\"/home\" も指定しましょう（これは、\n"
"Linux パーティションが複数ないと不可能ですが)。\n"
"\n"
"\n"
"ちなみに各パーティションは以下の書式で挙がっています: 「名前」「容量」\n"
"\n"
"\n"
"「名前」は次の書式です: 「ハードディスク種類」「ドライブ番号」\n"
"「パーティション番号」（たとえば「hda1」)\n"
"\n"
"\n"
"「ハードディスク種類」は、IDE ディスクなら「hd」で、SCSI なら「sd」\n"
"です。\n"
"\n"
"\n"
"「ドライブ番号」は、「hd」や「sd」の後につく文字です。IDEなら:\n"
"\n"
"   * 「a」はプライマリコントローラ上のマスタディスク\n"
"\n"
"   * 「b」はプライマリコントローラ上のスレーブディスク\n"
"\n"
"   * 「c」はセカンダリIDEコントローラ上のマスタディスク\n"
"\n"
"   * 「d」はセカンダリIDEコントローラ上のスレーブディスク\n"
"\n"
"\n"
"SCSI "
"ハードディスクの場合、「a」はプライマリ、「b」はセカンダリ、という具合です"

#: ../../help.pm_.c:252
msgid ""
"Choose the hard drive you want to erase to install your\n"
"new Linux-Mandrake partition. Be careful, all data present on it will be "
"lost\n"
"and will not be recoverable."
msgstr ""
"新しい Linux-Mandrake パーティションのインストール用に消去したい\n"
"ハードディスクを選んでください。そのハードディスク上のデータは全部\n"
"消えて回復できません。注意してください。"

#: ../../help.pm_.c:257
msgid ""
"Click on \"OK\" if you want to delete all data and\n"
"partitions present on this hard drive. Be careful, after clicking on \"OK\", "
"you\n"
"will not be able to recover any data and partitions present on this hard "
"drive,\n"
"including any Windows data.\n"
"\n"
"\n"
"Click on \"Cancel\" to cancel this operation without losing any data and\n"
"partitions present on this hard drive."
msgstr ""
"このハードディスク上のすべてのデータやパーティションを\n"
"消去するなら「OK」をクリックしてください。「OK」をクリックしたら、\n"
"このハードディスク上に今あるデータやパーティションは、ウィンドウズ\n"
"のものを含め、すべて消去されて回復不可能になります。\n"
"\n"
"\n"
"この操作を取りやめて、ハードディスク上のデータやパーティションを\n"
"そのままにしておくには「キャンセル」をクリックしましょう。"

#: ../../help.pm_.c:267
msgid ""
"More than one Microsoft Windows partition have been\n"
"detected on your hard drive. Please choose the one you want resize to "
"install\n"
"your new Linux-Mandrake operating system.\n"
"\n"
"\n"
"For information, each partition is listed as follow; \"Linux name\", "
"\"Windows\n"
"name\" \"Capacity\".\n"
"\n"
"\"Linux name\" is coded as follow: \"hard drive type\", \"hard drive "
"number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and "
"\"sd\"\n"
"if it is an SCSI hard drive.\n"
"\n"
"\n"
"\"Hard drive number\" is always a letter putted after \"hd\" or \"sd\". With "
"IDE hard drives:\n"
"\n"
"   * \"a\" means \"master hard drive on the primary IDE controller\",\n"
"\n"
"   * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
"\n"
"   * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
"\n"
"   * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means "
"\"secondary hard drive\", etc.\n"
"\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first "
"disk\n"
"or partition is called \"C:\")."
msgstr ""
"ウィンドウズのパーティションがハードディスク上に見つかりました。\n"
"Linux-Mandrake OS のインストール用にリサイズしたいものを選んで\n"
"ください。\n"
"\n"
"\n"
"ちなみに各パーティションは以下の書式で挙がっています: "
"「名前」「ウィンドウズ名」「容量」\n"
"\n"
"\n"
"「名前」は次の書式です: 「ハードディスク種類」「ドライブ番号」\n"
"「パーティション番号」（たとえば「hda1」)\n"
"\n"
"\n"
"「ハードディスク種類」は、IDE ディスクなら「hd」で、SCSI なら「sd」\n"
"です。\n"
"\n"
"\n"
"「ドライブ番号」は、「hd」や「sd」の後につく文字です。IDEなら:\n"
"\n"
"   * 「a」はプライマリコントローラ上のマスタディスク\n"
"\n"
"   * 「b」はプライマリコントローラ上のスレーブディスク\n"
"\n"
"   * 「c」はセカンダリIDEコントローラ上のマスタディスク\n"
"\n"
"   * 「d」はセカンダリIDEコントローラ上のスレーブディスク\n"
"\n"
"\n"
"SCSI "
"ハードディスクの場合、「a」はプライマリ、「b」はセカンダリ、という具合です\n"
"\n"
"「ウィンドウズ名」は、ウィンドウズでのドライブ文字です（最初のディスク\n"
"やパーティションは「C:」ドライブです)。"

#: ../../help.pm_.c:300
msgid "Please be patient. This operation can take several minutes."
msgstr "しばらくお待ちを。この操作はしばらくかかりますので。"

#: ../../help.pm_.c:303
msgid ""
"Any partitions that have been newly defined must be\n"
"formatted for use (formatting meaning creating a filesystem).\n"
"\n"
"\n"
"At this time, you may wish to reformat some already existing partitions to "
"erase\n"
"the data they contain. If you wish do that, please also select the "
"partitions\n"
"you want to format.\n"
"\n"
"\n"
"Please note that it is not necessary to reformat all pre-existing "
"partitions.\n"
"You must reformat the partitions containing the operating system (such as "
"\"/\",\n"
"\"/usr\" or \"/var\") but do you no have to reformat partitions containing "
"data\n"
"that you wish to keep (typically /home).\n"
"\n"
"\n"
"Please be careful selecting partitions, after formatting, all data will be\n"
"deleted and you will not be able to recover any of them.\n"
"\n"
"\n"
"Click on \"OK\" when you are ready to format partitions.\n"
"\n"
"\n"
"Click on \"Cancel\" if you want to choose other partitions to install your "
"new\n"
"Linux-Mandrake operating system."
msgstr ""
"新しくつくったパーティションは、すべてフォーマットしないと使えません\n"
"（フォーマットとはファイルシステムをつくるということです）。\n"
"\n"
"\n"
"ここで、既存のパーティションもフォーマットして、中身のデータを消去\n"
"しておくこともできます。この場合には、フォーマットしたいパーティション\n"
"も選んでおいてください。\n"
"\n"
"\n"
"別に既存のパーティションを無理にフォーマットする必要はありません。\n"
"でも、OS の入ったパーティションはフォーマットが必要です（たとえば\n"
"「/」「/usr」「/var」など）が、とっておきたいデータの入った\n"
"パーティション（通常は「/home」）はそのままでだいじょうぶです。\n"
"\n"
"\n"
"パーティション選びには注意しましょう。フォーマットしたら、データは\n"
"全部消去されて、二度と回復できません。\n"
"\n"
"\n"
"パーティションのフォーマットを開始するには「OK」をクリックします。\n"
"\n"
"\n"
"他のパーティションを選んでそちらにLinux-Mandrake OS を入れるなら、\n"
"「キャンセル」をクリックしてください。"

#: ../../help.pm_.c:329
msgid ""
"You may now select the group of packages you wish to\n"
"install or upgrade.\n"
"\n"
"\n"
"DrakX will then check whether you have enough room to install them all. If "
"not,\n"
"it will warn you about it. If you want to go on anyway, it will proceed onto "
"the\n"
"installation of all selected groups but will drop some packages of lesser\n"
"interest. At the bottom of the list you can select the option \n"
"\"Individual package selection\"; in this case you will have to browse "
"through\n"
"more than 1000 packages..."
msgstr ""
"ではインストール・アップグレードしたいパッケージ群を選びましょう。\n"
"\n"
"選んだら、DrakX のほうで、それをインストールするだけの余裕があるか\n"
"チェックします。不足なら警告を出します。それでも続けたければ、DrakX\n"
"は実際のインストールに進みますが、重要でないパッケージは落とします。\n"
"一覧の最後に「個別のパッケージを選択」というのがあります。これを\n"
"選ぶと、1000個以上のパッケージをずっと見ていくことになりますよ..."

#: ../../help.pm_.c:341
msgid ""
"You can now choose individually all the packages you\n"
"wish to install.\n"
"\n"
"\n"
"You can expand or collapse the tree by clicking on options in the left "
"corner of\n"
"the packages window.\n"
"\n"
"\n"
"If you prefer to see packages sorted in alphabetic order, click on the icon\n"
"\"Toggle flat and group sorted\".\n"
"\n"
"\n"
"If you want not to be warned on dependencies, click on \"Automatic\n"
"dependencies\". If you do this, note that unselecting one package may "
"silently\n"
"unselect several other packages which depend on it."
msgstr ""
"ここではインストールしたいパッケージを個別に選べます。\n"
"\n"
"\n"
"パッケージウィンドウの左すみにあるオプションをクリックすると、ツリーを\n"
"のばしたり縮めたりできます。\n"
"\n"
"\n"
"パッケージを abc 順に並べ替えたければ、「abc順とグループ順切り替え」\n"
"アイコンをクリックしてください。\n"
"\n"
"\n"
"依存関係についての警告がいらなければ、「依存関係自動処理」を\n"
"クリックしてください。これを選ぶと、あるパッケージを選択解除\n"
"したら、それに依存するパッケージもだまって解除されます。"

#: ../../help.pm_.c:358
msgid ""
"If you have all the CDs in the list above, click Ok. If you have\n"
"none of those CDs, click Cancel. If only some CDs are missing, unselect "
"them,\n"
"then click Ok."
msgstr ""
"上記の一覧のCDがすべてそろっていれば、Okをクリックしましょう。\n"
"CDが一つもなければ、キャンセルをクリックしてください。\n"
"手元にないCDがあれば、それを選択からはずしてからOkをクリックします。"

#: ../../help.pm_.c:363
msgid ""
"Your new Linux-Mandrake operating system is currently being\n"
"installed. This operation should take a few minutes (it depends on size you\n"
"choose to install and the speed of your computer).\n"
"\n"
"\n"
"Please be patient."
msgstr ""
"新しい Linux-Mandrake os をインストール中です。しばらく時間が\n"
"かかります（インストールするサイズとコンピュータの速度にもよります）。\n"
"\n"
"\n"
"しばらくお待ちを。"

#: ../../help.pm_.c:371
msgid ""
"You can now test your mouse. Use buttons and wheel to verify\n"
"if settings are good. If not, you can click on \"Cancel\" to choose another\n"
"driver."
msgstr ""
"さあ、マウスをテストしてみましょう、ボタンやホイールを使ってみて、\n"
"設定がこれでいいか見てください。ダメなら「キャンセル」を押して、\n"
"ドライバを選び直してください。"

#: ../../help.pm_.c:376
msgid ""
"Please select the correct port. For example, the COM1\n"
"port under MS Windows is named ttyS0 under GNU/Linux."
msgstr ""
"正しいポートを選んでください。たとえば、MS ウィンドウズでの\n"
"COM1ポートは、GNU/Linuxでは ttyS0 という名前になります。"

#: ../../help.pm_.c:380
msgid ""
"If you wish to connect your computer to the Internet or\n"
"to a local network please choose the correct option. Please turn on your "
"device\n"
"before choosing the correct option to let DrakX detect it automatically.\n"
"\n"
"\n"
"If you do not have any connection to the Internet or a local network, "
"choose\n"
"\"Disable networking\".\n"
"\n"
"\n"
"If you wish to configure the network later after installation or if you "
"have\n"
"finished to configure your network connection, choose \"Done\"."
msgstr ""
"マシンをインターネットや LAN につなぎたいなら、対応する\n"
"オプションを選んでください、正しいオプションを選ぶ前に、そのデバイス\n"
"の電源をいれて、DrakX に自動検出させてください。\n"
"\n"
"\n"
"インターネットや LAN に接続しないなら、「ネットワークを使わない」を\n"
"選びましょう。\n"
"\n"
"\n"
"ネットワーク設定をあとまわしにするか、あるいはもう設定し終わっている\n"
"なら「完了」を選びます。"

#: ../../help.pm_.c:393
msgid ""
"No modem has been detected. Please select the serial port on which it is "
"plugged.\n"
"\n"
"\n"
"For information, the first serial port (called \"COM1\" under Microsoft\n"
"Windows) is called \"ttyS0\" under Linux."
msgstr ""
"モデムが検出できません。モデムのつながっているシリアルポートを\n"
"選んでください。\n"
"\n"
"\n"
"参考までに、最初のシリアルポート（ウィンドウズでは「COM1」）は、\n"
"Linux では「ttyS0」と呼ばれます。"

#: ../../help.pm_.c:400
msgid ""
"You may now enter dialup options. If you don't know\n"
"or are not sure what to enter, the correct informations can be obtained "
"from\n"
"your Internet Service Provider. If you do not enter the DNS (name server)\n"
"information here, this information will be obtained from your Internet "
"Service\n"
"Provider at connection time."
msgstr ""
"さあダイヤルアップの設定をします。何を入力していいかわからない、\n"
"または自信がないときは、正しい情報をインターネットのプロバイダに\n"
"教わってください。DNS (ネームサーバ) 情報をここで入力しなければ、\n"
"この情報は接続時にインターネットのプロバイダから取得されます。"

#: ../../help.pm_.c:407
msgid ""
"If your modem is an external modem, please turn on it now to let DrakX "
"detect it automatically."
msgstr ""
"モデムが外付けなら、いま電源を入れて、DrakXに自動的に検出させてください。"

#: ../../help.pm_.c:410
msgid "Please turn on your modem and choose the correct one."
msgstr "モデムの電源を入れて、正しいものを選んでください。"

#: ../../help.pm_.c:413
msgid ""
"If you are not sure if informations above are\n"
"correct or if you don't know or are not sure what to enter, the correct\n"
"informations can be obtained from your Internet Service Provider. If you do "
"not\n"
"enter the DNS (name server) information here, this information will be "
"obtained\n"
"from your Internet Service Provider at connection time."
msgstr ""
"上の情報が正しいかどうかわからない、あるいは何を入力するか\n"
"わからなければ、正しい情報をインターネットのプロバイダ（ISP) に\n"
"教わってください。DNS (ネームサーバ) 情報をここで入力しなければ、\n"
"この情報は接続時にインターネットのプロバイダから取得されます。"

#: ../../help.pm_.c:420
msgid ""
"You may now enter your host name if needed. If you\n"
"don't know or are not sure what to enter, the correct informations can be\n"
"obtained from your Internet Service Provider."
msgstr ""
"では、必要ならホスト名を入れてください。もしわからないか、\n"
"何を入力していいかわからなければ、ISPに正しい情報を教わってください。"

#: ../../help.pm_.c:425
msgid ""
"You may now configure your network device.\n"
"\n"
"   * IP address: if you don't know or are not sure what to enter, ask your "
"network administrator.\n"
"     You should not enter an IP address if you select the option \"Automatic "
"IP\" below.\n"
"\n"
"   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
"know or are not sure what to enter,\n"
"     ask your network administrator.\n"
"\n"
"   * Automatic IP: if your network uses BOOTP or DHCP protocol, select this "
"option. If selected, no value is needed in\n"
"    \"IP address\". If you don't know or are not sure if you need to select "
"this option, ask your network administrator."
msgstr ""
"それではネットワークデバイスを設定しましょう:\n"
"\n"
"  - IP アドレス: わからなければ、ネットワーク管理者にきいてください。\n"
"    下で「自動 IP」 オプションを選ぶなら、入力しないでください\n"
"\n"
"  - ネットマスク: 「255.255.255.0」にしておくのが無難です。自信がなければ\n"
"ネットワーク管理者にきいてください。\n"
"\n"
"\n"
"  - 自動 IP: ネットワークで BOOTP か DHCP プロトコルを使っていたら\n"
"このオプションを選んでください。これを選ぶと、「IP アドレス」を指定\n"
"する必要はありません。自信がなければ、ネットワーク管理者にきいて\n"
"ください。"

#: ../../help.pm_.c:437
msgid ""
"You may now enter your host name if needed. If you\n"
"don't know or are not sure what to enter, ask your network administrator."
msgstr ""
"さて、必要なら自分のホスト名を入力しましょう。\n"
"わからないか自信がなければネットワーク管理者にきいてください。"

#: ../../help.pm_.c:441
msgid ""
"You may now enter your host name if needed. If you\n"
"don't know or are not sure what to enter, leave blank."
msgstr ""
"ここで必要なら、ホスト名を入力してください。もし\n"
"わからないか自信がなければ、空けておきましょう。"

#: ../../help.pm_.c:445
msgid ""
"You may now enter dialup options. If you're not sure what to enter, the\n"
"correct information can be obtained from your ISP."
msgstr ""
"ではダイヤルアップの設定をします。何を入力していいかわからなければ、\n"
"ISPに正しい情報を教わってください。"

#: ../../help.pm_.c:449
msgid ""
"If you will use proxies, please configure them now. If you don't know if\n"
"you should use proxies, ask your network administrator or your ISP."
msgstr ""
"プロキシを使うなら、ここで設定しましょう。プロキシを使うかどうか\n"
"わからなければ、ネットワーク管理者かISPにきいてください。"

#: ../../help.pm_.c:453
msgid ""
"You can install cryptographic package if your internet connection has been\n"
"set up correctly. First choose a mirror where you wish to download packages "
"and\n"
"after that select the packages to install.\n"
"\n"
"\n"
"Note you have to select mirror and cryptographic packages according\n"
"to your legislation."
msgstr ""
"インターネット接続の設定が正しければ、ここで暗号パッケージをインストール\n"
"できます。まずパッケージをとってくるサイトを選んで、それからインストール\n"
"するパッケージを選びます。\n"
"\n"
"なお、サイトの選択と暗号パッケージの選択は、自分のところの法規制にあった\n"
"ものにしてください。"

#: ../../help.pm_.c:462
msgid "You can now select your timezone according to where you live."
msgstr "さて、自分の居場所にあわせたタイムゾーンを選びましょう。"

#: ../../help.pm_.c:465
msgid ""
"GNU/Linux manages time in GMT (Greenwich Manage\n"
"Time) and translates it in local time according to the time zone you have\n"
"selected.\n"
"\n"
"\n"
"If you use Microsoft Windows on this computer, choose \"No\"."
msgstr ""
"自分の住んでいる時間帯を選びます。\n"
"\n"
"\n"
"Linux は時間をGMT、つまり「グリニッジ標準時」で管理していて、それを\n"
"あなたの選んだ時間帯にあわせて変換します。\n"
"\n"
"\n"
"このマシンでウィンドウズを使っているときには「No」を選んでください"

#: ../../help.pm_.c:473
msgid ""
"You may now choose which services you want to start at boot time.\n"
"\n"
"\n"
"When your mouse comes over an item, a small balloon help will popup which\n"
"describes the role of the service.\n"
"\n"
"\n"
"Be very careful in this step if you intend to use your machine as a server: "
"you\n"
"will probably want not to start any services that you don't need. Please\n"
"remember that several services can be dangerous if they are enable on a "
"server.\n"
"In general, select only the services that you really need."
msgstr ""
"マシンの起動時に自動的に開始したいサービスを選びましょう。\n"
"\n"
"\n"
"項目のうえにマウスをもってくると、それが何のサービスか説明する\n"
"小さな吹き出しが出てきます。\n"
"\n"
"\n"
"このマシンをサーバにするつもりなら、ここでは特に気をつけましょう。\n"
"使わないサービスをむやみに開始させてはいけません。一部のサービスは、\n"
"サーバ上で使うと危険だというのをお忘れなく。\n"
"一般に、本当に必要なサービスだけ選んでください。"

#: ../../help.pm_.c:486
msgid ""
"You can configure a local printer (connected to your computer) or remote\n"
"printer (accessible via a Unix, Netware or Microsoft Windows network)."
msgstr ""
"設定するプリンタは、ローカルプリンタ（このマシンに直接つながったもの）でも\n"
"リモートプリンタ (Unix, Netware, MS Windows のネットワーク経由のもの）でも\n"
"かまいません。"

#: ../../help.pm_.c:490
msgid ""
"If you wish to be able to print, please choose one printing system between\n"
"CUPS and LPR.\n"
"\n"
"\n"
"CUPS is a new, powerful and flexible printing system for Unix systems (CUPS\n"
"means \"Common Unix Printing System\"). It is the default printing system "
"in\n"
"Linux-Mandrake.\n"
"\n"
"\n"
"LPR is the old printing system used in previous Linux-Mandrake "
"distributions.\n"
"\n"
"\n"
"If you don't have printer, click on \"None\"."
msgstr ""
"印刷できるようにしたいならば、CUPS と LPRのどちらかの印刷システムを\n"
"選んでください。\n"
"\n"
"\n"
"CUPS は新しい、強力で柔軟な Unix 用印刷システムです (CUPSというのは\n"
"「Common Unix Printing System」の略)。Linux-Mandrakeではこれがデフォルト\n"
"です。\n"
"\n"
"\n"
"LPR は古い印刷システムで、昔の Linux-Mandrake で使っていました。\n"
"\n"
"\n"
"プリンタを持っていなければ、「なし」をクリックしましょう。"

#: ../../help.pm_.c:505
msgid ""
"GNU/Linux can deal with many types of printer. Each of these types requires\n"
"a different setup.\n"
"\n"
"\n"
"If your printer is physically connected to your computer, select \"Local\n"
"printer\".\n"
"\n"
"\n"
"If you want to access a printer located on a remote Unix machine, select\n"
"\"Remote printer\".\n"
"\n"
"\n"
"If you want to access a printer located on a remote Microsoft Windows "
"machine\n"
"(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
msgstr ""
"GNU/Linux は各種のプリンタを扱えます。それぞれ設定がちがってきます。\n"
"\n"
"\n"
"もしプリンタがマシンに直接つながっているなら、「ローカルプリンタ」を\n"
"選びましょう。\n"
"\n"
"\n"
"リモートの Unix マシンにつながったプリンタをアクセスしたい場合には、\n"
"「リモートプリンタ」を選びます。\n"
"\n"
"\n"
"リモートの MS Windows マシンにつながったプリンタをアクセスするなら\n"
"(あるいは SMB プロトコルを使った Unix マシンのプリンタ）、選ぶのは\n"
"「SMB/Windows 95/98/NT」です。"

#: ../../help.pm_.c:521
msgid ""
"Please turn on your printer before continuing to let DrakX detect it.\n"
"\n"
"You have to enter some informations here.\n"
"\n"
"\n"
"   * Name of printer: the print spooler uses \"lp\" as default printer name. "
"So, you must have a printer named \"lp\".\n"
"     If you have only one printer, you can use several names for it. You "
"just need to separate them by a pipe\n"
"     character (a \"|\"). So, if you prefer a more meaningful name, you have "
"to put it first, eg: \"My printer|lp\".\n"
"     The printer having \"lp\" in its name(s) will be the default printer.\n"
"\n"
"\n"
"   * Description: this is optional but can be useful if several printers are "
"connected to your computer or if you allow\n"
"     other computers to access to this printer.\n"
"\n"
"\n"
"   * Location: if you want to put some information on your\n"
"     printer location, put it here (you are free to write what\n"
"     you want, for example \"2nd floor\").\n"
msgstr ""
"ここでまずプリンタの電源を入れて、DrakX が検出できるようにしましょう。\n"
"\n"
"さらにいくつか情報が要ります。\n"
"\n"
"\n"
"   * プリンタ名: プリ他のスプーラは、デフォルトのプリンタ名として「lp」を\n"
"     使います。だから「lp」というプリンタが必要です。もしプリンタが\n"
"     一台だけでも、名前は複数持たせられます。ただ、それをパイプ文字「｜」で\n"
"     区切ればいいのです。ですから、もっと意味のある名前にしたければ、\n"
"     それをまず持ってきましょう。「�y printer|lp」という具合。\n"
"     名前に「lp」のついたプリンタがデフォルトのプリンタになります。\n"
"\n"
"\n"
"   * 説明: これはなくてもいいですが、複数のプリンタを持っていたり、ほかの\n"
"     マシンがこのプリンタにアクセスするときに便利です。\n"
"\n"
"\n"
"   * 場所: もしプリンタの場所について情報を入れたければ、ここに\n"
"     入力しましょう（「二階」とか好きな記述でかまいません）。\n"

#: ../../help.pm_.c:542
msgid ""
"You need to enter some informations here.\n"
"\n"
"\n"
"   * Name of queue: the print spooler uses \"lp\" as default printer name. "
"So, you need have a printer named \"lp\".\n"
"    If you have only one printer, you can use several names for it. You just "
"need to separate them by a pipe\n"
"    character (a \"|\"). So, if you prefer to have a more meaningful name, "
"you have to put it first, eg: \"My printer|lp\".\n"
"    The printer having \"lp\" in its name(s) will be the default printer.\n"
"\n"
"  \n"
"   * Spool directory: it is in this directory that printing jobs are stored. "
"Keep the default choice\n"
"     if you don't know what to use\n"
"\n"
"\n"
"   * Printer Connection: If your printer is physically connected to your "
"computer, select \"Local printer\".\n"
"     If you want to access a printer located on a remote Unix machine, "
"select \"Remote lpd printer\".\n"
"\n"
"\n"
"     If you want to access a printer located on a remote Microsoft Windows "
"machine (or on Unix machine using SMB\n"
"     protocol), select \"SMB/Windows 95/98/NT\".\n"
"\n"
"\n"
"     If you want to acces a printer located on NetWare network, select "
"\"NetWare\".\n"
msgstr ""
"ここでいろいろ情報を入力してください。\n"
"\n"
"\n"
"   * キューの名前: プリンタのスプーラは、デフォルトでは「lp」を使います。\n"
"     だから「lp」というプリンタが必要です。\n"
"     もしプリンタが一台だけでも、名前は複数持たせられます。ただ、それを\n"
"     パイプ文字「｜」で区切ればいいのです。ですから、もっと意味のある\n"
"     名前にしたければ、それをまず持ってきましょう。「My printer|lp」と\n"
"     いう具合。\n"
"     名前に「lp」のついたプリンタがデフォルトのプリンタになります。\n"
"\n"
"\n"
"   * スプールディレクトリ: このディレクトリに印刷ジョブが保存されます。\n"
"     何を使うべきかわからなければデフォルトのままにしておきましょう\n"
"\n"
"\n"
"   * プリンタ接続: プリンタがマシンに直接つながっている場合は、\n"
"     「ローカルプリンタ」を選びます。リモートのUnixマシン上のプリンタを\n"
"     使うには、「リモートlpdプリンタ」を選びます。\n"
"\n"
"\n"
"     リモートのウィンドウズマシン（またはSMB プロトコル使用のUnixマシン\n"
"     上のプリンタをアクセスするには、「SMB/Windows 95/98/NT」を選びます。\n"
"\n"
"\n"
"     NetWare ネットワーク上のプリンタをアクセスしたければ、\n"
"     「NetWare」を選びます。\n"

#: ../../help.pm_.c:567
msgid ""
"Your printer has not been detected. Please enter the name of the device on\n"
"which it is connected.\n"
"\n"
"\n"
"For information, most printers are connected on the first parallel port. "
"This\n"
"one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
"Windows."
msgstr ""
"プリンタが検出できません。プリンタが接続されたデバイス名を入力して\n"
"ください。\n"
"\n"
"\n"
"ちなみに、プリンタはふつうは最初のパラレルポートにつながっているものです。\n"
"これはGNU/Linux では「/dev/lp0」だし、ウィンドウズでは「LPT1」になります。"

#: ../../help.pm_.c:575
msgid "You must now select your printer in the above list."
msgstr "さあ上の一覧から自分のプリンタを選んでください。"

#: ../../help.pm_.c:578
msgid ""
"Please select the right options according to your printer.\n"
"Please see its documentation if you don't know what choose here.\n"
"\n"
"\n"
"You will be able to test your configuration in next step and you will be "
"able to modify it if it doesn't work as you want."
msgstr ""
"自分のプリンタにあった、正しいオプションを選んでください。\n"
"なにを選ぶかわからなければ、プリンタの資料を見てください。\n"
"\n"
"\n"
"次のステップで設定をテストできますし、それが思い通りに機能しなければ\n"
"そこで変えられます。"

#: ../../help.pm_.c:585
msgid ""
"You can now enter the root password for your Linux-Mandrake system.\n"
"The password must be entered twice to verify that both password entries are "
"identical.\n"
"\n"
"\n"
"Root is the system's administrator and is the only user allowed to modify "
"the\n"
"system configuration. Therefore, choose this password carefully. \n"
"Unauthorized use of the root account can be extemely dangerous to the "
"integrity\n"
"of the system, its data and other system connected to it.\n"
"\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. It should never be written down.\n"
"\n"
"\n"
"Do not make the password too long or complicated, though: you must be able "
"to\n"
"remember it without too much effort."
msgstr ""
"ではLinux-Mandrakeシステムのrootパスワードを設定しましょう。\n"
"パスワードは 2 回入力して、タイプミスがないかどうかを確認します。\n"
"\n"
"\n"
"Rootというのはシステムの管理者で、システムの設定を変えられる唯一の\n"
"人物です。ですから、このパスワードを入力するときは注意してください！\n"
"root権限を不正に使うと、このシステムや、ネットワークでつながった他の\n"
"システムやそのデータに重大な危険を及ぼすことになりかねません。\n"
"\n"
"\n"
"パスワードは、アルファベットや数字を混ぜたものにして、最低でも 8 文字\n"
"必要です。*絶対に*メモっておいたりしてはいけません。\n"
"\n"
"\n"
"でも長すぎたりややこしすぎたりするパスワードもダメですよ。自分では\n"
"楽に思いだせる必要があります。"

#: ../../help.pm_.c:603
msgid ""
"To enable a more secure system, you should select \"Use shadow file\" and\n"
"\"Use MD5 passwords\"."
msgstr ""
"高セキュリティシステムにしたければ、「シャドウファイルを使う」と\n"
"「MD5 パスワードを使う」を選んでください。"

#: ../../help.pm_.c:607
msgid ""
"If your network uses NIS, select \"Use NIS\". If you don't know, ask your\n"
"network administrator."
msgstr ""
"もしネットワークで NIS を使っているなら「NIS を使う」を選んでください。\n"
"わからなければネットワーク管理者にきいてください。"

#: ../../help.pm_.c:611
msgid ""
"You may now create one or more \"regular\" user account(s), as\n"
"opposed to the \"privileged\" user account, root. You can create\n"
"one or more account(s) for each person you want to allow to use\n"
"the computer. Note that each user account will have its own\n"
"preferences (graphical environment, program settings, etc.)\n"
"and its own \"home directory\", in which these preferences are\n"
"stored.\n"
"\n"
"\n"
"First of all, create an account for yourself! Even if you will be the only "
"user\n"
"of the machine, you may NOT connect as root for daily use of the system: "
"it's a\n"
"very high security risk. Making the system unusable is very often a typo "
"away.\n"
"\n"
"\n"
"Therefore, you should connect to the system using the user account\n"
"you will have created here, and login as root only for administration\n"
"and maintenance purposes."
msgstr ""
"ではここで、「通常の」ユーザアカウントをつくります。\n"
"これは「特権」ユーザアカウントのroot とはちがいます。このシステムを\n"
"使う人たちに、それぞれ別々のアカウントをつくるようにします。各アカウ\n"
"ントは独自の環境設定（グラフィック環境、プログラム設定など）を持ち、\n"
"それぞれ自前の「ホームディレクトリ」を持ってそこにこういう設定を保存\n"
"しておきます。\n"
"\n"
"\n"
"まずは自分用のアカウントをつくってください！　ユーザがあなた一人でも、\n"
"ふだんシステムを使うときには、rootを使っては*いけません！*\n"
"これをやると、セキュリティ上のリスクがきわめて大きくなります。ちょっと\n"
"したタイプミスで、システムを壊すおそれも出てきますよ。\n"
"\n"
"\n"
"したがって、ふつうはここでつくるユーザアカウントでシステムを使いましょ\n"
"う。rootでログインするのは、システム管理とメンテナンスのときだけです。"

#: ../../help.pm_.c:630
msgid ""
"Creating a boot disk is strongly recommended. If you can't\n"
"boot your computer, it's the only way to rescue your system without\n"
"reinstalling it."
msgstr ""
"起動ディスクは是非ともつくっておいてください。マシンを起動できなく\n"
"なったら、これが再インストールせずにディスクを救う唯一の手段です。"

#: ../../help.pm_.c:635
msgid ""
"You need to indicate where you wish\n"
"to place the information required to boot to GNU/Linux.\n"
"\n"
"\n"
"Unless you know exactly what you are doing, choose \"First sector of\n"
"drive (MBR)\"."
msgstr ""
"GNU/Linuxをたちあげるのに必要な情報を、どこに起きたいか指定します。\n"
"\n"
"\n"
"何をするのかが正確に分からなければ、「ドライブの最初のセクタ(MBR)」\n"
"を選んでください。"

#: ../../help.pm_.c:643
msgid ""
"Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
" (primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
msgstr ""
"ふつうは「/dev/hda」（プライマリチャネルのマスタードライブ）か、\n"
"「/dev/sda」 (最初の SCSI ディスク) を選びます。\n"
"自信がある場合にだけ他の値を入れてください。"

#: ../../help.pm_.c:647
msgid ""
"LILO (the LInux LOader) and Grub are bootloaders: they are able to boot\n"
"either GNU/Linux or any other operating system present on your computer.\n"
"Normally, these other operating systems are correctly detected and\n"
"installed. If this is not the case, you can add an entry by hand in this\n"
"screen. Be careful as to choose the correct parameters.\n"
"\n"
"\n"
"You may also want not to give access to these other operating systems to\n"
"anyone, in which case you can delete the corresponding entries. But\n"
"in this case, you will need a boot disk in order to boot them!"
msgstr ""
"LILO (LInux LOader) と Grub はブートローダです。コンピュータ上のGNU/Linux\n"
"など各種OSを起動できます。\n"
"普通は、これらのOSは自動的にきちんと検出されてインストールされます。\n"
"これがダメなら、ここで手動でエントリを追加しましょう。パラメータを\n"
"まちがえないよう注意してください。\n"
"\n"
"\n"
"他のOSには他の人がアクセスできないようにしたいこともあります。この\n"
"場合にはそのOSのエントリを削除しておきましょう。ただしこの場合は、\n"
"そのOSを使うときには起動ディスクが要りますよ！"

#: ../../help.pm_.c:659
msgid ""
"LILO and grub main options are:\n"
"  - Boot device: Sets the name of the device (e.g. a hard disk\n"
"partition) that contains the boot sector. Unless you know specifically\n"
"otherwise, choose \"/dev/hda\".\n"
"\n"
"\n"
"  - Delay before booting default image: Specifies the number in tenths\n"
"of a second the boot loader should wait before booting the first image.\n"
"This is useful on systems that immediately boot from the hard disk after\n"
"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
"omitted or is set to zero.\n"
"\n"
"\n"
"  - Video mode: This specifies the VGA text mode that should be selected\n"
"when booting. The following values are available: \n"
"\n"
"    * normal: select normal 80x25 text mode.\n"
"\n"
"    * <number>:  use the corresponding text mode."
msgstr ""
"LILO と grub の主要オプションは以下のとおりです:\n"
"  - ブートデバイス: ブートセクタを持つデバイス名を設定（たとえばハード\n"
"ディスクのパーティション）。自信がない限り、「/dev/hda」を選びましょう。\n"
"\n"
"\n"
"  - デフォルトイメージ起動の待ち時間: ブートローダが最初のイメージを起動\n"
"するまでの待ち時間を1/10秒単位で指定します。これは、キーボードが有効に\n"
"なってすぐにハードディスクから起動するシステムなどで便利です。この\n"
"「待ち時間」が無記入だったりゼロだったりしたら、ブートローダは待ちません。\n"
"\n"
"\n"
"  - ビデオモード：起動時に使う VGA テキストモードを指定します。使えるのは\n"
"以下の値です：\n"
"\n"
"    * ノーマル: 通常の 80x25 のテキストモード\n"
"\n"
"    * <数字>:  数字に対応したテキストモード"

#: ../../help.pm_.c:680
msgid ""
"SILO is a bootloader for SPARC: it is able to boot\n"
"either GNU/Linux or any other operating system present on your computer.\n"
"Normally, these other operating systems are correctly detected and\n"
"installed. If this is not the case, you can add an entry by hand in this\n"
"screen. Be careful as to choose the correct parameters.\n"
"\n"
"\n"
"You may also want not to give access to these other operating systems to\n"
"anyone, in which case you can delete the corresponding entries. But\n"
"in this case, you will need a boot disk in order to boot them!"
msgstr ""
"SILO はSPARC用のブートローダです。コンピュータ上のGNU/Linux\n"
"など各種OSを起動できます。\n"
"普通は、これらのOSは自動的にきちんと検出されてインストールされます。\n"
"これがダメなら、ここで手動でエントリを追加しましょう。パラメータを\n"
"まちがえないよう注意してください。\n"
"\n"
"\n"
"他のOSには他の人がアクセスできないようにしたいこともあります。この\n"
"場合にはそのOSのエントリを削除しておきましょう。ただしこの場合は、\n"
"そのOSを使うときには起動ディスクが要りますよ！"

#: ../../help.pm_.c:692
msgid ""
"SILO main options are:\n"
"  - Bootloader installation: Indicate where you want to place the\n"
"information required to boot to GNU/Linux. Unless you know exactly\n"
"what you are doing, choose \"First sector of drive (MBR)\".\n"
"\n"
"\n"
"  - Delay before booting default image: Specifies the number in tenths\n"
"of a second the boot loader should wait before booting the first image.\n"
"This is useful on systems that immediately boot from the hard disk after\n"
"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
"omitted or is set to zero."
msgstr ""
"SILO の主要オプションは以下のとおりです:\n"
"  - ブートローダの導入: GNU/Linux を起動するのに必要となる情報を置く場所を\n"
"入れてください。なにをすればいいかはっきりと分からない場合は、\n"
"「ドライブの最初のセクタ(MBR)」を選びましょう。\n"
"\n"
"\n"
"  - デフォルトイメージ起動の待ち時間: ブートローダが最初のイメージを起動\n"
"するまでの待ち時間を1/10秒単位で指定します。これは、キーボードが有効に\n"
"なってすぐにハードディスクから起動するシステムなどで便利です。この\n"
"「待ち時間」が無記入だったりゼロだったりしたら、ブートローダは待ちません。"

#: ../../help.pm_.c:705
msgid ""
"Now it's time to configure the X Window System, which is the\n"
"core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
"you must configure your video card and monitor. Most of these\n"
"steps are automated, though, therefore your work may only consist\n"
"of verifying what has been done and accept the settings :)\n"
"\n"
"\n"
"When the configuration is over, X will be started (unless you\n"
"ask DrakX not to) so that you can check and see if the\n"
"settings suit you. If they don't, you can come back and\n"
"change them, as many times as necessary."
msgstr ""
"ではXウィンドウシステムの設定をしましょう。これはGNU/Linux GUI "
"(グラフィカル\n"
"ユーザインターフェース）の核心部分です。このためにはまず、ビデオカードと\n"
"モニタの設定をします。が、途中、ほとんどは自動化されているので、通常なら\n"
"単に、結果を見てその設定を承認するだけですみます。\n"
"\n"
"\n"
"設定が終わったら、Xがたちあがります（あなたがそうするなとDrakXに命令しない\n"
"限り）。これで設定が正しいかを確認できます。正しくなければ、戻ってきて\n"
"やりなおせます。これは何度でも好きなだけできます。"

#: ../../help.pm_.c:718
msgid ""
"If something is wrong in X configuration, use these options to correctly\n"
"configure the X Window System."
msgstr ""
"X の設定がおかしければ、このオプションを使って、Xウィンドウシステムを\n"
"正しく設定し直してください。"

#: ../../help.pm_.c:722
msgid ""
"If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n"
"\"No\"."
msgstr ""
"グラフィカル・ログインが好きなら、「はい」を選びます。そうでなければ\n"
"「いいえ」を選びます。"

#: ../../help.pm_.c:726
msgid ""
"You can now select some miscellaneous options for your system.\n"
"\n"
"* Use hard drive optimizations: this option can improve hard disk "
"performance but is only for advanced users. Some buggy\n"
"  chipsets can ruin your data, so beware. Note that the kernel has a builtin "
"blacklist of drives and chipsets, but if\n"
"  you want to avoid bad surprises, leave this option unset.\n"
"\n"
"\n"
"* Choose security level: you can choose a security level for your system. "
"Please refer to the manual for complete\n"
"  information. Basically, if you don't know what to choose, keep the default "
"option.\n"
"\n"
"\n"
"* Precise RAM if needed: unfortunately, there is no standard method to ask "
"the BIOS about the amount of RAM present in\n"
"  your computer. As consequence, Linux may fail to detect your amount of RAM "
"correctly. If this is the case, you can\n"
"  specify the correct amount or RAM here. Please note that a difference of 2 "
"or 4 MB between detected memory and memory\n"
"  present in your system is normal.\n"
"\n"
"\n"
"* Removable media automounting: if you would prefer not to manually mount "
"removable media (CD-Rom, floppy, Zip, etc.) by\n"
"  typing \"mount\" and \"umount\", select this option.\n"
"\n"
"\n"
"* Clean \"/tmp\" at each boot: if you want delete all files and directories "
"stored in \"/tmp\" when you boot your system,\n"
"  select this option.\n"
"\n"
"\n"
"* Enable num lock at startup: if you want NumLock key enabled after booting, "
"select this option. Please note that you\n"
"  should not enable this option on laptops and that NumLock may or may not "
"work under X."
msgstr ""
"ではその他のオプションをいくつか設定しましょう。\n"
"\n"
"  - ハードディスク最適化をする: このオプションは、ハードディスク性能\n"
"    を改善してくれますが、高度なユーザ専用です。一部のチップセットだと\n"
"    ディスク上のデータが壊れます。カーネルでも、困ったチップセットや\n"
"    ドライブのブラックリストは持っていますが、痛い目にあいたくなければ\n"
"    選ばないほうが無難です。\n"
"\n"
"\n"
"  - セキュリティレベルの選択: システムのセキュリティレベルを選べます。\n"
"    詳しくはマニュアルを参照してください。基本的には、よくわからなけれ\n"
"    ばデフォルトのままでいきましょう。\n"
"\n"
"\n"
"  - 必要なら正確なRAMサイズ: 残念ながらいまのパソコンの世界では、BIOSに\n"
"    システム上のRAMの量についてまともに聞く方法がありません。この結果、\n"
"    Linuxはマシン上のRAMをきちんと検出できないことがあります。この場合\n"
"    には、正しい量を指定します。\n"
"    注意： 2 or 4 MB くらいのずれは気にしなくて大丈夫です。\n"
"\n"
"\n"
"  - リムーバブルメディアの自動マウント: リムーバブルドライブ（CD-ROMや\n"
"    フロッピー、ZIPなど）を「mount」や「umount」コマンドで手動マウント\n"
"    するのが面倒なら、このオプションを選びます。\n"
"\n"
"\n"
"* 起動のたびに「/tmp」を空に: もしシステムを起動するたびに「/tmp」の\n"
"ファイルやディレクトリを消去するには、このオプションを選んでください。\n"
"\n"
"\n"
"  - 起動時にNum Lockをオンにする: 起動時にNumber Lockをオンにしたければ\n"
"    このオプションを選びます（注意：ラップトップでは、このオプションを\n"
"    オンにしてはいけません。また、XウィンドウではNum Lockは使えないこ\n"
"    とがあります）。"

#: ../../help.pm_.c:755
msgid ""
"Your system is going to reboot.\n"
"\n"
"After rebooting, your new Linux Mandrake system will load automatically.\n"
"If you want to boot into another existing operating system, please read\n"
"the additional instructions."
msgstr ""
"システムを再起動します。\n"
"\n"
"再起動したら、新しい Linux Mandrake システムが自動的にたちあがります。\n"
"別のOSをたちあげたいときには、追加の説明を読んでください。"

#: ../../install2.pm_.c:40
msgid "Choose your language"
msgstr "言語の選択"

#: ../../install2.pm_.c:41
msgid "Select installation class"
msgstr "導入クラスの選択"

#: ../../install2.pm_.c:42
msgid "Hard drive detection"
msgstr "ディスクの検出"

#: ../../install2.pm_.c:43
msgid "Configure mouse"
msgstr "マウスの設定"

#: ../../install2.pm_.c:44
msgid "Choose your keyboard"
msgstr "キーボードの選択"

#: ../../install2.pm_.c:45 ../../install_steps_interactive.pm_.c:497
msgid "Miscellaneous"
msgstr "その他もろもろ"

#: ../../install2.pm_.c:46
msgid "Setup filesystems"
msgstr "ファイルシステム"

#: ../../install2.pm_.c:47
msgid "Format partitions"
msgstr "フォーマット"

#: ../../install2.pm_.c:48
msgid "Choose packages to install"
msgstr "パッケージの選択"

#: ../../install2.pm_.c:49
msgid "Install system"
msgstr "システムの導入"

#: ../../install2.pm_.c:50
msgid "Configure networking"
msgstr "ネットワーク設定"

#: ../../install2.pm_.c:52
msgid "Configure timezone"
msgstr "タイムゾーン設定"

#: ../../install2.pm_.c:53
msgid "Configure services"
msgstr "サービスの設定"

#: ../../install2.pm_.c:54
msgid "Configure printer"
msgstr "プリンタの設定"

#: ../../install2.pm_.c:55 ../../install_steps_interactive.pm_.c:762
#: ../../install_steps_interactive.pm_.c:763
msgid "Set root password"
msgstr "ルートパスワード"

#: ../../install2.pm_.c:56
msgid "Add a user"
msgstr "ユーザの登録"

#: ../../install2.pm_.c:58
msgid "Create a bootdisk"
msgstr "起動ディスク作成"

#: ../../install2.pm_.c:60
msgid "Install bootloader"
msgstr "ブートローダ設定"

#: ../../install2.pm_.c:61
msgid "Configure X"
msgstr "X の設定"

#: ../../install2.pm_.c:63
msgid "Auto install floppy"
msgstr "導入設定フロッピ"

#: ../../install2.pm_.c:65
msgid "Exit install"
msgstr "導入作業を終了"

#: ../../install_any.pm_.c:578
msgid "Error reading file $f"
msgstr "ファイル $f 読み込みエラー"

#: ../../install_gtk.pm_.c:426
msgid "Please test the mouse"
msgstr "マウスをテストしてみてください。"

#: ../../install_gtk.pm_.c:427
msgid "To activate the mouse,"
msgstr "マウスを有効にするには、"

#: ../../install_gtk.pm_.c:428
msgid "MOVE YOUR WHEEL!"
msgstr "ホイールを動かしてください！"

#: ../../install_interactive.pm_.c:23
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"あなたのマシン上のハードの中には、「非公開の」ドライバが必要なものが\n"
"あります。以下の情報を見てください: %s"

#: ../../install_interactive.pm_.c:41
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"root パーティションが見あたりませんね。これは絶対に必要です。\n"
"新しくパーティションをつくるか、既存のものをクリックして選びます。\n"
"そして ``マウントポイント'' アクションを選び、 `/'にセットします"

#: ../../install_interactive.pm_.c:46 ../../install_steps_graphical.pm_.c:259
msgid "You must have a swap partition"
msgstr "スワップパーティションが必要です"

#: ../../install_interactive.pm_.c:47 ../../install_steps_graphical.pm_.c:261
msgid ""
"You don't have a swap partition\n"
"\n"
"Continue anyway?"
msgstr ""
"スワップパーティションがありません\n"
"\n"
"構わずに続けますか？"

#: ../../install_interactive.pm_.c:68
msgid "Use free space"
msgstr "フリースペースの使用"

#: ../../install_interactive.pm_.c:70
msgid "Not enough free space to allocate new partitions"
msgstr "新しいパーティションに割り当てる十分なフリースペースがありません"

#: ../../install_interactive.pm_.c:78
msgid "Use existing partition"
msgstr "既存のパーティションを使用"

#: ../../install_interactive.pm_.c:80
msgid "There is no existing partition to use"
msgstr "存在しないパーティション"

#: ../../install_interactive.pm_.c:87
msgid "Use the Windows partition for loopback"
msgstr "Windows パーティションをループバックに使用"

#: ../../install_interactive.pm_.c:90
msgid "Which partition do you want to use for Linux4Win?"
msgstr "どのパーティションにLinux4Winを入れますか"

#: ../../install_interactive.pm_.c:92
msgid "Choose the sizes"
msgstr "サイズを選択"

#: ../../install_interactive.pm_.c:93
msgid "Root partition size in MB: "
msgstr "ルートパーティションのサイズ (MB)"

#: ../../install_interactive.pm_.c:94
msgid "Swap partition size in MB: "
msgstr "スワップパーティションのサイズ (MB): "

#: ../../install_interactive.pm_.c:102
msgid "Use the free space on the Windows partition"
msgstr "ウィンドウズパーティション上のフリースペースを使用"

#: ../../install_interactive.pm_.c:105
msgid "Which partition do you want to resize?"
msgstr "どのパーティションをリサイズしますか？"

#: ../../install_interactive.pm_.c:107
msgid "Computing Windows filesystem bounds"
msgstr "ウィンドウズファイルシステムの境界を計算"

#: ../../install_interactive.pm_.c:110
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occured: %s"
msgstr ""
"FAT リサイザーはパーティション操作ができません。\n"
"以下のエラーが発生: %s"

#: ../../install_interactive.pm_.c:113
msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
msgstr "ウィンドウズパーティションが断片化しすぎです。``デフラグ''してください"

#: ../../install_interactive.pm_.c:114
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this operation is\n"
"dangerous. If you have not already done so, you should first exit the\n"
"installation, run scandisk under Windows (and optionally run defrag), then\n"
"restart the installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"注意！\n"
"\n"
"DrakX はこれからウィンドウズのパーティションサイズを変更します。\n"
"注意:この操作は危険です。まだリサイズしていないのなら、いちどインストールを\n"
"中断し、scandiskをかけましょう（さらにdefragもかけたほうがいいです)。\n"
"データもバックアップしてありますか？　いまのうちにして\n"
"おいてください。\n"
"大丈夫なら Ok を押して下さい。"

#: ../../install_interactive.pm_.c:123
msgid "Which size do you want to keep for windows on"
msgstr "ウィンドウズ用にどのくらいのサイズを残しておきますが"

#: ../../install_interactive.pm_.c:124
#, c-format
msgid "partition %s"
msgstr "パーティション %s"

#: ../../install_interactive.pm_.c:130
#, c-format
msgid "FAT resizing failed: %s"
msgstr "FAT のリサイズに失敗: %s"

#: ../../install_interactive.pm_.c:145
msgid ""
"There is no FAT partitions to resize or to use as loopback (or not enough "
"space left)"
msgstr ""
"リサイズやループバック用のFATパーティションがありません "
"(または十分なスペースが無い)"

#: ../../install_interactive.pm_.c:151
msgid "Erase entire disk"
msgstr "全ディスク消去"

#: ../../install_interactive.pm_.c:151
msgid "Remove Windows(TM)"
msgstr "Windows(TM) を削除"

#: ../../install_interactive.pm_.c:154
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr ""
"複数のハードドライブを持っていますね、どれに linux をインストールしますか？"

#: ../../install_interactive.pm_.c:157
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "ドライブ %s 上のパーティションおよびデータは全部失われます"

#: ../../install_interactive.pm_.c:165
msgid "Expert mode"
msgstr "エキスパートモード"

#: ../../install_interactive.pm_.c:165
msgid "Use diskdrake"
msgstr "diskdrakeを使う"

#: ../../install_interactive.pm_.c:169
msgid "Use fdisk"
msgstr "fdiskを使う"

#: ../../install_interactive.pm_.c:172
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, don't forget to save using `w'"
msgstr ""
"%s をパーティションできます。\n"
"終わったら、必ず `w' を使って保存しましょう。"

#: ../../install_interactive.pm_.c:196
msgid "You don't have enough free space on your Windows partition"
msgstr "ウィンドウズパーティション上のフリースペースが足りません"

#: ../../install_interactive.pm_.c:211
msgid "I can't find any room for installing"
msgstr "インストール用の空きが見つかりませんが"

#: ../../install_interactive.pm_.c:214
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "DrakX パーティションウィザードは以下の解法を見付けました:"

#: ../../install_interactive.pm_.c:219
#, c-format
msgid "Partitioning failed: %s"
msgstr "パーティショニングに失敗: %s"

#: ../../install_interactive.pm_.c:234
msgid "Bringing up the network"
msgstr "ネットワークをたちあげる"

#: ../../install_interactive.pm_.c:239
msgid "Bringing down the network"
msgstr "ネットワークを停止する"

#: ../../install_steps.pm_.c:74
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"エラー発生，うまく処理する方法を知りません。\n"
"自分の責任で続けて下さい。"

#: ../../install_steps.pm_.c:202
#, c-format
msgid "Duplicate mount point %s"
msgstr "マウントポイント %s が重なっています"

#: ../../install_steps.pm_.c:385
msgid ""
"Some important packages didn't get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl "
"Mandrake/RPMS/*.rpm\"\n"
msgstr ""
"だいじなパッケージがいくつかきちんとインストールされませんでした。\n"
"CD-ROMか、CD-ROMのドライブがおかしいようです。\n"
"インストール済みのコンピュータで、以下のコマンドでCD-ROMをチェック\n"
"してみてください：\n"
"「 rpm -qpl Mandrake/RPMS/*.rpm 」\n"

#: ../../install_steps.pm_.c:458
#, c-format
msgid "Welcome to %s"
msgstr "%s へようこそ"

#: ../../install_steps.pm_.c:670
msgid "No floppy drive available"
msgstr "有効なフロッピードライブがありません"

#: ../../install_steps_auto_install.pm_.c:43
#: ../../install_steps_stdio.pm_.c:23
#, c-format
msgid "Entering step `%s'\n"
msgstr "ステップ `%s' を始めます\n"

#: ../../install_steps_graphical.pm_.c:287
msgid "Choose the size you want to install"
msgstr "インストールするサイズを選んで下さい"

#: ../../install_steps_graphical.pm_.c:334
msgid "Total size: "
msgstr "合計サイズ: "

#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:353
#: ../../standalone/rpmdrake_.c:136
#, c-format
msgid "Version: %s\n"
msgstr "バージョン: %s\n"

#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:354
#: ../../standalone/rpmdrake_.c:137
#, c-format
msgid "Size: %d KB\n"
msgstr "サイズ: %d KB\n"

#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:260
msgid "Choose the packages you want to install"
msgstr "インストールしたいパッケージを選んで下さい"

#: ../../install_steps_graphical.pm_.c:465 ../../install_steps_gtk.pm_.c:263
msgid "Info"
msgstr "情報"

#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:268
#: ../../install_steps_interactive.pm_.c:216 ../../standalone/rpmdrake_.c:161
msgid "Install"
msgstr "インストール"

#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:466
#: ../../install_steps_interactive.pm_.c:594
msgid "Installing"
msgstr "インストール中"

#: ../../install_steps_graphical.pm_.c:499 ../../install_steps_gtk.pm_.c:472
msgid "Please wait, "
msgstr "しばらくお待ち下さい，"

#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:474
msgid "Time remaining "
msgstr "残り時間 "

#: ../../install_steps_graphical.pm_.c:502 ../../install_steps_gtk.pm_.c:475
msgid "Total time "
msgstr "合計時間 "

#: ../../install_steps_graphical.pm_.c:507 ../../install_steps_gtk.pm_.c:484
#: ../../install_steps_interactive.pm_.c:594
msgid "Preparing installation"
msgstr "インストールの準備"

#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:500
#, c-format
msgid "Installing package %s"
msgstr "パッケージ %s のインストール"

#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:569
#: ../../install_steps_gtk.pm_.c:573
msgid "Go on anyway?"
msgstr "先に進みますか？"

#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:569
msgid "There was an error ordering packages:"
msgstr "パッケージの整列でエラーが発生:"

#: ../../install_steps_graphical.pm_.c:577
#: ../../install_steps_interactive.pm_.c:1003
msgid "Use existing configuration for X11?"
msgstr "すでにある X11 の設定を使いますか？"

#: ../../install_steps_gtk.pm_.c:136
msgid ""
"Your system is low on resource. You may have some problem installing\n"
"Linux-Mandrake. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"システムリソースが足りません。 Linux-Mandrake をインストールするには\n"
"いくつか問題があります。\n"
"この症状が起きたとき、かわりにテキストインストールを試せます。\n"
"これをするには、CDROM からブートしたとき、`F1'を押し、`text'と入力して\n"
"ください。"

#: ../../install_steps_gtk.pm_.c:150
msgid "Please, choose one of the following classes of installation:"
msgstr "以下のインストールクラスをどれか選んでください"

#: ../../install_steps_gtk.pm_.c:215
#, c-format
msgid ""
"The total size for the groups you have selected is approximately %d MB.\n"
msgstr "あなたの選んだグループの総サイズは、だいたい %d MBになります。\n"

#: ../../install_steps_gtk.pm_.c:217
msgid ""
"If you wish to install less than this size,\n"
"select the percentage of packages that you want to install.\n"
"\n"
"A low percentage will install only the most important packages;\n"
"a percentage of 100%% will install all selected packages."
msgstr ""
"インストール量を減らしたければ、パッケージのパーセント数を\n"
"指定してください。\n"
"\n"
"これを下げると、いちばん重要なものだけがインストールされます。\n"
"100%% を指定すると、選んだパッケージをすべてインストールします。"

#: ../../install_steps_gtk.pm_.c:222
msgid ""
"You have space on your disk for only %d%% of these packages.\n"
"\n"
"If you wish to install less than this,\n"
"select the percentage of packages that you want to install.\n"
"A low percentage will install only the most important packages;\n"
"a percentage of %d%% will install as many packages as possible."
msgstr ""
"ディスク上に空き領域には、これらのパッケージの %d%% しか入りません。\n"
"\n"
"インストール量を減らしたければ、パーセント数を指定してください。\n"
"これを下げると、いちばん重要なものだけがインストールされます。\n"
"%d%% を指定すると、最大限のパッケージをインストールします。"

#: ../../install_steps_gtk.pm_.c:228
msgid "You will be able to choose them more specifically in the next step."
msgstr "次のステップではもっと細かい選択が出来ます"

#: ../../install_steps_gtk.pm_.c:230
msgid "Percentage of packages to install"
msgstr "インストールするパッケージ中の割合"

#: ../../install_steps_gtk.pm_.c:272
msgid "Automatic dependencies"
msgstr "依存関係の自動解決"

#: ../../install_steps_gtk.pm_.c:332 ../../standalone/rpmdrake_.c:101
msgid "Expand Tree"
msgstr "ツリーをのばす"

#: ../../install_steps_gtk.pm_.c:333 ../../standalone/rpmdrake_.c:102
msgid "Collapse Tree"
msgstr "ツリーを縮める"

#: ../../install_steps_gtk.pm_.c:334
msgid "Toggle between flat and group sorted"
msgstr "そのままとグループ別を切り替え"

#: ../../install_steps_gtk.pm_.c:351
msgid "Bad package"
msgstr "パッケージが壊れています"

#: ../../install_steps_gtk.pm_.c:352
#, c-format
msgid "Name: %s\n"
msgstr "名前: %s\n"

#: ../../install_steps_gtk.pm_.c:355
#, c-format
msgid "Importance: %s\n"
msgstr "重要: %s\n"

#: ../../install_steps_gtk.pm_.c:363
#, c-format
msgid "Total size: %d / %d MB"
msgstr "合計サイズ: %d / %d MB"

#: ../../install_steps_gtk.pm_.c:382
msgid ""
"You can't select this package as there is not enough space left to install it"
msgstr "このパッケージは選択できません。ディスクの空き容量が不足です。"

#: ../../install_steps_gtk.pm_.c:386
msgid "The following packages are going to be installed"
msgstr "以下のパッケージがインストールされます"

#: ../../install_steps_gtk.pm_.c:387
msgid "The following packages are going to be removed"
msgstr "以下のパッケージが取り除かれます"

#: ../../install_steps_gtk.pm_.c:397
msgid "You can't select/unselect this package"
msgstr "このパッケージは選択・非選択できません"

#: ../../install_steps_gtk.pm_.c:416
msgid "This is a mandatory package, it can't be unselected"
msgstr "これは不可欠なパッケージです。非選択にはできません"

#: ../../install_steps_gtk.pm_.c:418
msgid "You can't unselect this package. It is already installed"
msgstr "このパッケージは非選択にできません。すでにインストール済みです"

#: ../../install_steps_gtk.pm_.c:422
msgid ""
"This package must be upgraded\n"
"Are you sure you want to deselect it?"
msgstr ""
"このパッケージはアップグレードが必要です。\n"
"本当に選択解除していいんですか？"

#: ../../install_steps_gtk.pm_.c:425
msgid "You can't unselect this package. It must be upgraded"
msgstr "このパッケージは選択解除できません。アップグレードが必要です"

#: ../../install_steps_gtk.pm_.c:469
msgid "Estimating"
msgstr "試算しています"

#: ../../install_steps_gtk.pm_.c:481 ../../interactive.pm_.c:86
#: ../../interactive.pm_.c:249 ../../interactive_newt.pm_.c:51
#: ../../interactive_newt.pm_.c:99 ../../interactive_stdio.pm_.c:27
#: ../../my_gtk.pm_.c:246 ../../my_gtk.pm_.c:486
msgid "Cancel"
msgstr "キャンセル"

#: ../../install_steps_gtk.pm_.c:495
#, c-format
msgid "%d packages"
msgstr "%d パッケージ"

#: ../../install_steps_gtk.pm_.c:531
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""

#: ../../install_steps_gtk.pm_.c:559 ../../install_steps_interactive.pm_.c:147
msgid "Accept"
msgstr "認める"

#: ../../install_steps_gtk.pm_.c:559
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"Cd-Rom を交換してください！\n"
"「 %s 」という Cd-Rom をドライブにいれて、 Ok を押してください。\n"
"CDがなければ、Cancel を押してこの Cd-Rom からのインストールを回避して下さい。"

#: ../../install_steps_gtk.pm_.c:559 ../../install_steps_interactive.pm_.c:147
msgid "Refuse"
msgstr "拒否"

#: ../../install_steps_gtk.pm_.c:573
msgid "There was an error installing packages:"
msgstr "パッケージのインストールでエラーが発生:"

#: ../../install_steps_interactive.pm_.c:38
msgid "An error occurred"
msgstr "エラー発生"

#: ../../install_steps_interactive.pm_.c:54
msgid "Please, choose a language to use."
msgstr "どの言語を使うか選んでくださいね。"

#: ../../install_steps_interactive.pm_.c:70
msgid "License agreement"
msgstr "ソフト使用ライセンス条項"

#: ../../install_steps_interactive.pm_.c:71
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the "
"Linux-Mandrake distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Linux-Mandrake distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read carefully this document. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurance of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Linux-Mandrake sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Linux-Mandrake\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"
msgstr ""
"Introduction\n"
"\n"
"The operating system and the different components available in the "
"Linux-Mandrake distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Linux-Mandrake distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read carefully this document. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurance of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Linux-Mandrake sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Linux-Mandrake\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"

#: ../../install_steps_interactive.pm_.c:154
#: ../../standalone/keyboarddrake_.c:21
msgid "Keyboard"
msgstr "キーボード"

#: ../../install_steps_interactive.pm_.c:155
#: ../../standalone/keyboarddrake_.c:22
msgid "Please, choose your keyboard layout."
msgstr "キーボードレイアウトは何ですか？"

#: ../../install_steps_interactive.pm_.c:166
msgid "You can choose other languages that will be available after install"
msgstr "インストール後使用可能になるほかの言語を選択できます"

#: ../../install_steps_interactive.pm_.c:173
#: ../../install_steps_interactive.pm_.c:520
msgid "All"
msgstr "ぜんぶ"

#: ../../install_steps_interactive.pm_.c:181
#: ../../install_steps_interactive.pm_.c:227
msgid "Install Class"
msgstr "インストールクラス"

#: ../../install_steps_interactive.pm_.c:181
msgid "Which installation class do you want?"
msgstr "どのインストールクラスを望みますか？"

#: ../../install_steps_interactive.pm_.c:183
msgid "Install/Update"
msgstr "インストール/更新"

#: ../../install_steps_interactive.pm_.c:183
msgid "Is this an install or an update?"
msgstr "インストールですか，更新ですか？"

#: ../../install_steps_interactive.pm_.c:192
msgid "Recommended"
msgstr "推奨"

#: ../../install_steps_interactive.pm_.c:195
#: ../../install_steps_interactive.pm_.c:211
msgid "Customized"
msgstr "カスタマイズ"

#: ../../install_steps_interactive.pm_.c:196
#: ../../install_steps_interactive.pm_.c:211
msgid "Expert"
msgstr "エキスパート"

#: ../../install_steps_interactive.pm_.c:206
msgid ""
"Are you sure you are an expert? \n"
"You will be allowed to make powerful but dangerous things here.\n"
"\n"
"You will be asked questions such as: ``Use shadow file for passwords?'',\n"
"are you ready to answer that kind of questions?"
msgstr ""
"あなた、本当にホントのエキスパートでしょうねぇ。\n"
"これを選ぶと、強力なだけにえらく危険なまねができちゃいますよ。\n"
"``パスワードをシャドウにしますか?''といった質問を訊かれます。このような質問に"
"ホントに答えられるんですか？"

#: ../../install_steps_interactive.pm_.c:216
msgid "Update"
msgstr "更新"

#: ../../install_steps_interactive.pm_.c:222
msgid "Workstation"
msgstr "ワークステーション"

#: ../../install_steps_interactive.pm_.c:223
msgid "Development"
msgstr "開発用"

#: ../../install_steps_interactive.pm_.c:224
msgid "Server"
msgstr "サーバ"

#: ../../install_steps_interactive.pm_.c:228
msgid "What is your system used for?"
msgstr "システムの使い方を選んでください。"

#: ../../install_steps_interactive.pm_.c:244 ../../standalone/mousedrake_.c:24
msgid "Please, choose the type of your mouse."
msgstr "マウスの型はなんですか？"

#: ../../install_steps_interactive.pm_.c:251 ../../standalone/mousedrake_.c:40
msgid "Mouse Port"
msgstr "マウスポート"

#: ../../install_steps_interactive.pm_.c:252
msgid "Please choose on which serial port your mouse is connected to."
msgstr "マウスはどのシリアルポートにつながっていますか？"

#: ../../install_steps_interactive.pm_.c:271
msgid "Configuring PCMCIA cards..."
msgstr "PCMCIAカードの設定中..."

#: ../../install_steps_interactive.pm_.c:271
msgid "PCMCIA"
msgstr "PCMCIA"

#: ../../install_steps_interactive.pm_.c:275
msgid "Configuring IDE"
msgstr "IDE の設定"

#: ../../install_steps_interactive.pm_.c:275
msgid "IDE"
msgstr "IDE"

#: ../../install_steps_interactive.pm_.c:288
msgid "no available partitions"
msgstr "使えるパーティションがありません"

#: ../../install_steps_interactive.pm_.c:291
msgid "Scanning partitions to find mount points"
msgstr "パーティションをスキャンしてマウントポイントを探しています"

#: ../../install_steps_interactive.pm_.c:299
msgid "Choose the mount points"
msgstr "マウントポイントの選択"

#: ../../install_steps_interactive.pm_.c:316
#, c-format
msgid ""
"I can't read your partition table, it's too corrupted for me :(\n"
"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
"The other solution is to disallow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to loose all the partitions?\n"
msgstr ""
"パーティションテーブルが読めません，壊れているようです:(\n"
"不正なパーティションを消してみましょうか？（これだとデータが全部消えます！）"
"\n"
"あるいは、DrakXにパーティションテーブルを変更させない手があります。\n"
"(エラーは%sです)\n"
"\n"
"全パーティションを消去してよろしいですね？\n"

#: ../../install_steps_interactive.pm_.c:329
msgid ""
"DiskDrake failed to read correctly the partition table.\n"
"Continue at your own risk!"
msgstr ""
"DiskDrake はパーティションテーブルを正しく読めませんでした。\n"
"ここから先は何が起きてもしりませんよ！"

#: ../../install_steps_interactive.pm_.c:337
msgid "Root Partition"
msgstr "ルートパーティション"

#: ../../install_steps_interactive.pm_.c:338
msgid "What is the root partition (/) of your system?"
msgstr "システムのルートパーティション(/) はなんですか？"

#: ../../install_steps_interactive.pm_.c:352
msgid "You need to reboot for the partition table modifications to take place"
msgstr "パーティションテーブルの変更を反映するにはリブートしてください"

#: ../../install_steps_interactive.pm_.c:376
msgid "Choose the partitions you want to format"
msgstr "フォーマットするパーティションを選んでください"

#: ../../install_steps_interactive.pm_.c:386
msgid "Check bad blocks?"
msgstr "不良ブロックを検査しますか？"

#: ../../install_steps_interactive.pm_.c:397
msgid "Formatting partitions"
msgstr "パーティションをフォーマット"

#: ../../install_steps_interactive.pm_.c:401
#, c-format
msgid "Creating and formatting file %s"
msgstr "ファイル %s の作成とフォーマット"

#: ../../install_steps_interactive.pm_.c:404
msgid "Not enough swap to fulfill installation, please add some"
msgstr "インストールに十分なスワップがありません，スワップを加えて下さい"

#: ../../install_steps_interactive.pm_.c:410
msgid "Looking for available packages"
msgstr "手持ちのパッケージをさがしています"

#: ../../install_steps_interactive.pm_.c:416
msgid "Finding packages to upgrade"
msgstr "アップグレードするパッケージをさがしています"

#: ../../install_steps_interactive.pm_.c:433
#, c-format
msgid ""
"Your system has not enough space left for installation or upgrade (%d > %d)"
msgstr ""
"インストールやアップグレードに必要なディスクの空き容量が不足です。 (%d > %d)"

#: ../../install_steps_interactive.pm_.c:449
#, c-format
msgid "Complete (%dMB)"
msgstr "完全 (%dMB)"

#: ../../install_steps_interactive.pm_.c:449
#, c-format
msgid "Minimum (%dMB)"
msgstr "最小 (%dMB)"

#: ../../install_steps_interactive.pm_.c:449
#, c-format
msgid "Recommended (%dMB)"
msgstr "推奨 (%dMB)"

#: ../../install_steps_interactive.pm_.c:455
msgid "Custom"
msgstr "カスタム"

#: ../../install_steps_interactive.pm_.c:462
msgid "Select the size you want to install"
msgstr "インストールするサイズを選んで下さい"

#: ../../install_steps_interactive.pm_.c:508
msgid "Package Group Selection"
msgstr "パッケージグループを選択"

#: ../../install_steps_interactive.pm_.c:521
msgid "Individual package selection"
msgstr "個別パッケージの選択"

#: ../../install_steps_interactive.pm_.c:570
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"上記の一覧のCDがすべてそろっていれば、Okをクリックしましょう。\n"
"CDが一つもなければ、キャンセルをクリックしてください。\n"
"手元にないCDがあれば、それを選択からはずしてからOkをクリックします。"

#: ../../install_steps_interactive.pm_.c:575
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "「 %s 」というCd-Rom"

#: ../../install_steps_interactive.pm_.c:603
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"パッケージ %s をインストール\n"
"%d%%"

#: ../../install_steps_interactive.pm_.c:612
msgid "Post-install configuration"
msgstr "インストール設定を確定"

#: ../../install_steps_interactive.pm_.c:637
msgid ""
"You have now the possibility to download software aimed for encryption.\n"
"\n"
"WARNING:\n"
"\n"
"Due to different general requirements applicable to these software and "
"imposed\n"
"by various jurisdictions, customer and/or end user of theses software "
"should\n"
"ensure that the laws of his/their jurisdiction allow him/them to download, "
"stock\n"
"and/or use these software.\n"
"\n"
"In addition customer and/or end user shall particularly be aware to not "
"infringe\n"
"the laws of his/their jurisdiction. Should customer and/or end user not\n"
"respect the provision of these applicable laws, he/they will incure serious\n"
"sanctions.\n"
"\n"
"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
"liable\n"
"for special, indirect or incidental damages whatsoever (including, but not\n"
"limited to loss of profits, business interruption, loss of commercial data "
"and\n"
"other pecuniary losses, and eventual liabilities and indemnification to be "
"paid\n"
"pursuant to a court decision) arising out of use, possession, or the sole\n"
"downloading of these software, to which customer and/or end user could\n"
"eventually have access after having sign up the present agreement.\n"
"\n"
"\n"
"For any queries relating to these agreement, please contact \n"
"Mandrakesoft, Inc.\n"
"2400 N. Lincoln Avenue Suite 243\n"
"Altadena California 91001\n"
"USA"
msgstr ""
"さあ、暗号化用のソフトをダウンロードする準備ができました。\n"
"\n"
"警告:\n"
"\n"
"これらのソフトに対する要件や、各地の法制度のちがいがいろいろあるので、\n"
"このソフトのお客様やエンドユーザは、自分の所属する法制度のもとで、こう\n"
"したソフトのダウンロードや保存、使用などが認められているかどうかを自分\n"
"で確認してください。\n"
"\n"
"さらにお客様やエンドユーザは、自分の所属する法制度の法規制に違反しない\n"
"ようよく注意してください。お客様やエンドユーザが該当する法規制の規定を\n"
"尊重しない場合には、深刻な処罰対象となる危険をおかすことになります。\n"
"\n"
"この同意書に署名した後に顧客やエンドユーザがアクセスする見込みのある、\n"
"これらのソフトウェアを使い、保持し、あるいはダウンロードすることによる\n"
"特殊、間接、偶発など一切の損害（これには売上損失、業務の停止、商用データの\n"
"喪失や関連損失と法廷判断に基づく損害賠償や補償金支払いなどが含まれるが\n"
"これに限られるものではない）について、Mandrakesoft やその製造業者や\n"
"サプライヤはいかなる場合にもなんら責任を持たない。\n"
"\n"
"以上の取り決めについての問い合わせは、以下に連絡のこと：\n"
"Mandrakesoft, Inc.\n"
"2400 N. Lincoln Avenue Suite 243\n"
"Altadena California 91001\n"
"USA"

#: ../../install_steps_interactive.pm_.c:669
msgid "Choose a mirror from which to get the packages"
msgstr "どのサイトからパッケージを持ってくるかを選択"

#: ../../install_steps_interactive.pm_.c:680
msgid "Contacting the mirror to get the list of available packages"
msgstr "サイトに接続してパッケージ一覧を取得しています"

#: ../../install_steps_interactive.pm_.c:683
msgid "Please choose the packages you want to install."
msgstr "インストールしたいパッケージを選んで下さい"

#: ../../install_steps_interactive.pm_.c:695
msgid "Which is your timezone?"
msgstr "あなたの時間帯はどれですか？"

#: ../../install_steps_interactive.pm_.c:697
msgid "Is your hardware clock set to GMT?"
msgstr "ハードウェアクロックは GMT にセットしてありますか？"

#: ../../install_steps_interactive.pm_.c:735
msgid "Which printing system do you want to use?"
msgstr "どの印刷システムを使いますか？"

#: ../../install_steps_interactive.pm_.c:762
msgid "No password"
msgstr "パスワードなし"

#: ../../install_steps_interactive.pm_.c:767
msgid "Use shadow file"
msgstr "シャドウファイルを使う"

#: ../../install_steps_interactive.pm_.c:767
msgid "shadow"
msgstr "シャドウ"

#: ../../install_steps_interactive.pm_.c:768
msgid "MD5"
msgstr "MD5"

#: ../../install_steps_interactive.pm_.c:768
msgid "Use MD5 passwords"
msgstr "MD5 パスワードを使う"

#: ../../install_steps_interactive.pm_.c:770
msgid "Use NIS"
msgstr "NIS を使う"

#: ../../install_steps_interactive.pm_.c:770
msgid "yellow pages"
msgstr "イエローページ"

#: ../../install_steps_interactive.pm_.c:776
#, c-format
msgid "This password is too simple (must be at least %d characters long)"
msgstr "このパスワードは簡単すぎます（最低でも %d 文字使ってください）"

#: ../../install_steps_interactive.pm_.c:783
msgid "Authentification NIS"
msgstr "認証NIS"

#: ../../install_steps_interactive.pm_.c:784
msgid "NIS Domain"
msgstr "NIS ドメイン"

#: ../../install_steps_interactive.pm_.c:784
msgid "NIS Server"
msgstr "NIS サーバ"

#: ../../install_steps_interactive.pm_.c:809
#: ../../standalone/adduserdrake_.c:36
msgid "Accept user"
msgstr "受け付けるユーザ"

#: ../../install_steps_interactive.pm_.c:809
#: ../../standalone/adduserdrake_.c:36
msgid "Add user"
msgstr "ユーザを追加"

#: ../../install_steps_interactive.pm_.c:810
#: ../../standalone/adduserdrake_.c:37
#, c-format
msgid "(already added %s)"
msgstr "(すでに %s は加わっています)"

#: ../../install_steps_interactive.pm_.c:810
#: ../../standalone/adduserdrake_.c:37
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"ユーザ名を入力して下さい\n"
"%s"

#: ../../install_steps_interactive.pm_.c:812
#: ../../standalone/adduserdrake_.c:39
msgid "Real name"
msgstr "実際の氏名"

#: ../../install_steps_interactive.pm_.c:813 ../../printerdrake.pm_.c:93
#: ../../printerdrake.pm_.c:127 ../../standalone/adduserdrake_.c:40
msgid "User name"
msgstr "ユーザ名"

#: ../../install_steps_interactive.pm_.c:818
#: ../../standalone/adduserdrake_.c:45
msgid "Shell"
msgstr "シェル"

#: ../../install_steps_interactive.pm_.c:820
#: ../../standalone/adduserdrake_.c:47
msgid "Icon"
msgstr "アイコン"

#: ../../install_steps_interactive.pm_.c:830
#: ../../standalone/adduserdrake_.c:57
msgid "This password is too simple"
msgstr "パスワードが簡単すぎます"

#: ../../install_steps_interactive.pm_.c:831
#: ../../standalone/adduserdrake_.c:58
msgid "Please give a user name"
msgstr "ユーザ名を与えて下さい"

#: ../../install_steps_interactive.pm_.c:832
#: ../../standalone/adduserdrake_.c:59
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "ユーザ名には英小文字，数字，`-' `_' しか使えません。"

#: ../../install_steps_interactive.pm_.c:833
#: ../../standalone/adduserdrake_.c:60
msgid "This user name is already added"
msgstr "このユーザ名はすでに加わっています"

#: ../../install_steps_interactive.pm_.c:857
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"SILO on your system, or another operating system removes SILO, or SILO "
"doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures.\n"
"\n"
"If you want to create a bootdisk for your system, insert a floppy in the "
"first\n"
"drive and press \"Ok\"."
msgstr ""
"カスタムブートディスクがあると、通常のブートローダを使わずに Linux を\n"
"起動できます。SILO をインストールしたくない場合や、他の OS が\n"
" SILO を削除する場合、またはハードウェア設定のため SILO がうまく作動\n"
"しない場合に使用できます。\n"
"カスタムブートディスクは、Mandrake のシステム復旧用のレスキューイメージ\n"
"としても使用できます。これがあればシステムが危機におちいったときに\n"
"復旧するのが楽になります。\n"
"ブートディスクを作るならば、フロッピィディスクをドライブに挿入し、\n"
"「OK」を押してください。"

#: ../../install_steps_interactive.pm_.c:873
msgid "First floppy drive"
msgstr "最初のフロッピードライブ"

#: ../../install_steps_interactive.pm_.c:874
msgid "Second floppy drive"
msgstr "二番目のフロッピードライブ"

#: ../../install_steps_interactive.pm_.c:875
msgid "Skip"
msgstr "スキップ"

#: ../../install_steps_interactive.pm_.c:880
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"LILO (or grub) on your system, or another operating system removes LILO, or "
"LILO doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures. Would you like to create a bootdisk for your system?"
msgstr ""
"カスタムブートディスクがあると、通常のブートローダを使わずに Linux を\n"
"起動できます。LILO (またはGRUB)をインストールしたくない場合や、他の OS が\n"
" LILO を削除する場合、またはハードウェア設定のため LILO がうまく作動\n"
"しない場合に使用できます。\n"
"カスタムブートディスクは、Mandrake のシステム復旧用のレスキューイメージ\n"
"としても使用できます。これがあればシステムが危機におちいったときに\n"
"復旧するのが楽になります。ブートディスクを作りますか？"

#: ../../install_steps_interactive.pm_.c:889
msgid "Sorry, no floppy drive available"
msgstr "有効なフロッピードライブがありません，ごめんなさい"

#: ../../install_steps_interactive.pm_.c:892
msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr "ブートディスクを作りたいフロッピィドライブを選択"

#: ../../install_steps_interactive.pm_.c:898
#, c-format
msgid "Insert a floppy in drive %s"
msgstr "フロッピーをドライブ %s に挿入"

#: ../../install_steps_interactive.pm_.c:901
msgid "Creating bootdisk"
msgstr "ブートディスクの作成"

#: ../../install_steps_interactive.pm_.c:908
msgid "Preparing bootloader"
msgstr "ブートローダの準備"

#: ../../install_steps_interactive.pm_.c:917
msgid "Do you want to use aboot?"
msgstr "aboot を使いますか？"

#: ../../install_steps_interactive.pm_.c:920
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"aboot インストール時にエラー発生。\n"
"無理にインストールしてみますか？　ただし最初のパーティションが破壊されます。"

#: ../../install_steps_interactive.pm_.c:929
msgid "Installation of bootloader failed. The following error occured:"
msgstr "ブートローダのインストールに失敗しました。以下のエラーが発生:"

#: ../../install_steps_interactive.pm_.c:943 ../../standalone/draksec_.c:20
msgid "Welcome To Crackers"
msgstr "Crackersへようこそ"

#: ../../install_steps_interactive.pm_.c:944 ../../standalone/draksec_.c:21
msgid "Poor"
msgstr "きわめて低い"

#: ../../install_steps_interactive.pm_.c:945 ../../standalone/draksec_.c:22
msgid "Low"
msgstr "低い"

#: ../../install_steps_interactive.pm_.c:946 ../../standalone/draksec_.c:23
msgid "Medium"
msgstr "ほどほど"

#: ../../install_steps_interactive.pm_.c:947 ../../standalone/draksec_.c:24
msgid "High"
msgstr "高い"

#: ../../install_steps_interactive.pm_.c:948 ../../standalone/draksec_.c:25
msgid "Paranoid"
msgstr "神経質なほど高水準"

#: ../../install_steps_interactive.pm_.c:962
msgid "Miscellaneous questions"
msgstr "その他の質問"

#: ../../install_steps_interactive.pm_.c:963
msgid "(may cause data corruption)"
msgstr "（データが壊れるおそれがあります）"

#: ../../install_steps_interactive.pm_.c:963
msgid "Use hard drive optimisations?"
msgstr "ハードディスクを最適化しますか？"

#: ../../install_steps_interactive.pm_.c:964 ../../standalone/draksec_.c:46
msgid "Choose security level"
msgstr "セキュリティの水準を選んでください"

# added a \n to the translation to avoid that the dialog window
# in which it appears to be tooooo laaaaarge
#: ../../install_steps_interactive.pm_.c:965
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr ""
"必要なら正確なRAMサイズを入れてください\n"
"（%d MBが見つかりました）"

#: ../../install_steps_interactive.pm_.c:967
msgid "Removable media automounting"
msgstr "リムーバブルメディアを自動マウント中"

#: ../../install_steps_interactive.pm_.c:969
msgid "Clean /tmp at each boot"
msgstr "各ブート時に /tmp 以下を消す"

#: ../../install_steps_interactive.pm_.c:972
msgid "Enable multi profiles"
msgstr "マルチプロファイルを有効に"

#: ../../install_steps_interactive.pm_.c:974
msgid "Enable num lock at startup"
msgstr "起動時にnum lockをオンにする"

#: ../../install_steps_interactive.pm_.c:977
msgid "Give the ram size in MB"
msgstr "RamサイズをMBで入力"

#: ../../install_steps_interactive.pm_.c:979
msgid "Can't use supermount in high security level"
msgstr "スーパーマウントは高いセキュリティレベルでは使えません"

#: ../../install_steps_interactive.pm_.c:981
msgid ""
"beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
"If you want to be root, you have to login as a user and then use \"su\".\n"
"More generally, do not expect to use your machine for anything but as a "
"server.\n"
"You have been warned."
msgstr ""
"注意: このセキュリティレベルでは、コンソールでのルートログインは\n"
"許可されません！\n"
"root になりたいときは、ユーザでログインして「su」を使う必要があります。\n"
"一般的には、サーバを除く何かがマシンを使えると期待させないためです。\n"
"警告しましたよ。"

#: ../../install_steps_interactive.pm_.c:986
msgid ""
"Be carefull, having numlock enabled causes a lot of keystrokes to\n"
"give digits instead of normal letters (eg: pressing `p' gives `6')"
msgstr ""
"注意、numlock を有効にすると、いくつかのキーストロークは普通の文字\n"
"のかわりに数字を返します(例：`p'を打つと`6'を返します)"

#: ../../install_steps_interactive.pm_.c:1032
msgid "Do you want to generate an auto install floppy for linux replication?"
msgstr "linuxの複製用に、自動インストールディスクをつくりますか？"

#: ../../install_steps_interactive.pm_.c:1034
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "空のフロッピーをドライブ %s に挿入して下さい"

#: ../../install_steps_interactive.pm_.c:1049
#: ../../install_steps_interactive.pm_.c:1079
msgid "Creating auto install floppy"
msgstr "インストールフロッピーの自動作成"

#: ../../install_steps_interactive.pm_.c:1104
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"いくつかのインストールステップが不完全です。\n"
"\n"
"本当に終了しますか？"

#: ../../install_steps_interactive.pm_.c:1113
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"For information on fixes which are available for this release of "
"Linux-Mandrake,\n"
"consult the Errata available from http://www.linux-mandrake.com/.\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Linux-Mandrake User's Guide."
msgstr ""
"おめでとうございます!　インストール完了です。\n"
"ブート用メディアを抜いて、リターンを押して再起動して下さい。\n"
"\n"
"このバージョンの Linux-Mandrake のバグ修正情報は、\n"
"http://www.linux-mandrake/ で調べられます。\n"
"\n"
"インストール後の設定についてはユーザガイドの「インストールした後」の\n"
"章を参照して下さい。"

#: ../../install_steps_newt.pm_.c:22
#, c-format
msgid "Linux-Mandrake Installation %s"
msgstr "Linux-Mandrake インストール %s"

#: ../../install_steps_newt.pm_.c:33
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr "  <Tab>/<Alt-Tab> 要素間の移動  | <Space> 選択 | <F12> 次の画面 "

#: ../../interactive.pm_.c:273
msgid "Please wait"
msgstr "お待ち下さい"

#: ../../interactive_stdio.pm_.c:35
#, c-format
msgid "Ambiguity (%s), be more precise\n"
msgstr "不明 (%s)，もっと正確に\n"

#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
#: ../../interactive_stdio.pm_.c:71
msgid "Bad choice, try again\n"
msgstr "不正な選択，もう一度試して下さい\n"

#: ../../interactive_stdio.pm_.c:39
#, c-format
msgid " ? (default %s) "
msgstr "? (デフォルトは %s) "

#: ../../interactive_stdio.pm_.c:52
#, c-format
msgid "Your choice? (default %s) "
msgstr "どれにしますか？（デフォルトは %s）"

#: ../../interactive_stdio.pm_.c:72
#, c-format
msgid "Your choice? (default %s  enter `none' for none) "
msgstr "どれにしますか？（デフォルトは %s、選ばないなら「なし」）"

#: ../../keyboard.pm_.c:105 ../../keyboard.pm_.c:135
msgid "Czech (QWERTZ)"
msgstr "チェコ (QWERTZ)"

#: ../../keyboard.pm_.c:106 ../../keyboard.pm_.c:119 ../../keyboard.pm_.c:138
msgid "German"
msgstr "ドイツ"

#: ../../keyboard.pm_.c:107
msgid "Dvorak"
msgstr "Dvorak"

#: ../../keyboard.pm_.c:108 ../../keyboard.pm_.c:144
msgid "Spanish"
msgstr "スペイン"

#: ../../keyboard.pm_.c:109 ../../keyboard.pm_.c:145
msgid "Finnish"
msgstr "フィンランド"

#: ../../keyboard.pm_.c:110 ../../keyboard.pm_.c:120 ../../keyboard.pm_.c:146
msgid "French"
msgstr "フランス"

#: ../../keyboard.pm_.c:111 ../../keyboard.pm_.c:166
msgid "Norwegian"
msgstr "ノルウェー"

#: ../../keyboard.pm_.c:112
msgid "Polish"
msgstr "ポーランド"

#: ../../keyboard.pm_.c:113 ../../keyboard.pm_.c:171
msgid "Russian"
msgstr "ロシア"

#: ../../keyboard.pm_.c:114 ../../keyboard.pm_.c:182
msgid "UK keyboard"
msgstr "イギリス式キーボード"

#: ../../keyboard.pm_.c:115 ../../keyboard.pm_.c:118 ../../keyboard.pm_.c:183
msgid "US keyboard"
msgstr "アメリカ式キーボード"

#: ../../keyboard.pm_.c:122
msgid "Armenian (old)"
msgstr "アルメニア（古い）"

#: ../../keyboard.pm_.c:123
msgid "Armenian (typewriter)"
msgstr "アルメニア（タイプライター）"

#: ../../keyboard.pm_.c:124
msgid "Armenian (phonetic)"
msgstr "アルメニア（発音記号）"

#: ../../keyboard.pm_.c:127
msgid "Azerbaidjani (latin)"
msgstr "アゼルバイジャン(ラテン)"

#: ../../keyboard.pm_.c:128
msgid "Azerbaidjani (cyrillic)"
msgstr "アゼルバイジャン(cyrillic)"

#: ../../keyboard.pm_.c:129
msgid "Belgian"
msgstr "ベルギー"

#: ../../keyboard.pm_.c:130
msgid "Bulgarian"
msgstr "ブルガリア"

#: ../../keyboard.pm_.c:131
msgid "Brazilian (ABNT-2)"
msgstr "ブラジル"

#: ../../keyboard.pm_.c:132
msgid "Belarusian"
msgstr "ベラルーシ"

#: ../../keyboard.pm_.c:133
msgid "Swiss (German layout)"
msgstr "スイス（ドイツ式配列）"

#: ../../keyboard.pm_.c:134
msgid "Swiss (French layout)"
msgstr "スイス（フランス式配列）"

#: ../../keyboard.pm_.c:136
msgid "Czech (QWERTY)"
msgstr "チェコ (QWERTY)"

#: ../../keyboard.pm_.c:137
msgid "Czech (Programmers)"
msgstr ""

#: ../../keyboard.pm_.c:139
msgid "German (no dead keys)"
msgstr "ドイツ（デッドキーなし）"

#: ../../keyboard.pm_.c:140
msgid "Danish"
msgstr "デンマーク"

#: ../../keyboard.pm_.c:141
msgid "Dvorak (US)"
msgstr "Dvorak (US)"

#: ../../keyboard.pm_.c:142
msgid "Dvorak (Norwegian)"
msgstr "Dvorak (ノルウェー)"

#: ../../keyboard.pm_.c:143
msgid "Estonian"
msgstr "エストニア"

#: ../../keyboard.pm_.c:147
msgid "Georgian (\"Russian\" layout)"
msgstr "グルジア（「ロシア式」配列）"

#: ../../keyboard.pm_.c:148
msgid "Georgian (\"Latin\" layout)"
msgstr "グルジア（「ラテン」配列）"

#: ../../keyboard.pm_.c:149
msgid "Greek"
msgstr "ギリシャ"

#: ../../keyboard.pm_.c:150
msgid "Hungarian"
msgstr "ハンガリー"

#: ../../keyboard.pm_.c:151
msgid "Croatian"
msgstr "クロアチア"

#: ../../keyboard.pm_.c:152
msgid "Israeli"
msgstr "イスラエル"

#: ../../keyboard.pm_.c:153
msgid "Israeli (Phonetic)"
msgstr "イスラエル（発音記号）"

#: ../../keyboard.pm_.c:154
msgid "Iranian"
msgstr "イラン"

#: ../../keyboard.pm_.c:155
msgid "Icelandic"
msgstr "アイスランド"

#: ../../keyboard.pm_.c:156
msgid "Italian"
msgstr "イタリア"

#: ../../keyboard.pm_.c:157
msgid "Japanese 106 keys"
msgstr "日本語106キーボード"

#: ../../keyboard.pm_.c:158
msgid "Latin American"
msgstr "ラテンアメリカ"

#: ../../keyboard.pm_.c:160
msgid "Dutch"
msgstr "オランダ"

#: ../../keyboard.pm_.c:161
msgid "Lithuanian AZERTY (old)"
msgstr "リトアニア AZERTY (旧)"

#: ../../keyboard.pm_.c:163
msgid "Lithuanian AZERTY (new)"
msgstr "リトアニア AZERTY (新)"

#: ../../keyboard.pm_.c:164
msgid "Lithuanian \"number row\" QWERTY"
msgstr "リトアニア 「数字列」 QWERTY"

#: ../../keyboard.pm_.c:165
msgid "Lithuanian \"phonetic\" QWERTY"
msgstr "リトアニア 「発音」 QWERTY"

#: ../../keyboard.pm_.c:167
msgid "Polish (qwerty layout)"
msgstr "ポーランド（qwerty 配列）"

#: ../../keyboard.pm_.c:168
msgid "Polish (qwertz layout)"
msgstr "ポーランド（qwertz配列）"

#: ../../keyboard.pm_.c:169
msgid "Portuguese"
msgstr "ポルトガル"

#: ../../keyboard.pm_.c:170
msgid "Canadian (Quebec)"
msgstr "カナダ（ケベック）"

#: ../../keyboard.pm_.c:172
msgid "Russian (Yawerty)"
msgstr "ロシア（ ЯВЕРТИ ）"

#: ../../keyboard.pm_.c:173
msgid "Swedish"
msgstr "スウェーデン"

#: ../../keyboard.pm_.c:174
msgid "Slovenian"
msgstr "スロベニア"

#: ../../keyboard.pm_.c:175
msgid "Slovakian (QWERTZ)"
msgstr "スロバキア (QWERTZ)"

#: ../../keyboard.pm_.c:176
msgid "Slovakian (QWERTY)"
msgstr "スロバキア (QWERTY)"

#: ../../keyboard.pm_.c:177
msgid "Slovakian (Programmers)"
msgstr ""

#: ../../keyboard.pm_.c:178
msgid "Thai keyboard"
msgstr "タイ　キーボード"

#: ../../keyboard.pm_.c:179
msgid "Turkish (traditional \"F\" model)"
msgstr "トルコ（伝統的 \"F\" モデル）"

#: ../../keyboard.pm_.c:180
msgid "Turkish (modern \"Q\" model)"
msgstr "トルコ（現代 \"Q\" モデル）"

#: ../../keyboard.pm_.c:181
msgid "Ukrainian"
msgstr "ウクライナ"

#: ../../keyboard.pm_.c:184
msgid "US keyboard (international)"
msgstr "アメリカ式キーボード（国際式）"

#: ../../keyboard.pm_.c:185
msgid "Vietnamese \"numeric row\" QWERTY"
msgstr "ベトナム 「数字列」 QWERTY"

#: ../../keyboard.pm_.c:186
msgid "Yugoslavian (latin layout)"
msgstr "ユーゴスラビア（ラテン配列）"

#: ../../mouse.pm_.c:25
msgid "Sun - Mouse"
msgstr "Sun - マウス"

#: ../../mouse.pm_.c:31
msgid "Standard"
msgstr "標準"

#: ../../mouse.pm_.c:32
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: ../../mouse.pm_.c:33
#, fuzzy
msgid "Generic PS2 Wheel Mouse"
msgstr "汎用マウス"

#: ../../mouse.pm_.c:34
msgid "GlidePoint"
msgstr "GlidePoint"

#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:61
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:57
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: ../../mouse.pm_.c:38
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: ../../mouse.pm_.c:43
msgid "Generic"
msgstr "汎用"

#: ../../mouse.pm_.c:44
msgid "Wheel"
msgstr "ホイール"

#: ../../mouse.pm_.c:47
msgid "serial"
msgstr "マイクロソフト・インテリマウス（シリアル）"

#: ../../mouse.pm_.c:49
msgid "Generic 2 Button Mouse"
msgstr "汎用の2ボタンマウス"

#: ../../mouse.pm_.c:50
msgid "Generic 3 Button Mouse"
msgstr "汎用の3ボタンマウス"

#: ../../mouse.pm_.c:51
msgid "Microsoft IntelliMouse"
msgstr "マイクロソフト・インテリマウス（PS/2）"

#: ../../mouse.pm_.c:52
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: ../../mouse.pm_.c:53
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: ../../mouse.pm_.c:55
msgid "Logitech CC Series"
msgstr "Logitech CC シリーズ (シリアル)"

#: ../../mouse.pm_.c:56
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: ../../mouse.pm_.c:58
msgid "MM Series"
msgstr "MM Series"

#: ../../mouse.pm_.c:59
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: ../../mouse.pm_.c:60
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Logitech Mouse (シリアル, 古い C7 タイプ)"

#: ../../mouse.pm_.c:64
msgid "busmouse"
msgstr "バスマウス"

#: ../../mouse.pm_.c:66
msgid "2 buttons"
msgstr "2ボタン"

#: ../../mouse.pm_.c:67
msgid "3 buttons"
msgstr "3ボタン"

#: ../../mouse.pm_.c:70
msgid "none"
msgstr "なし"

#: ../../mouse.pm_.c:72
msgid "No mouse"
msgstr "マウスなし"

#: ../../my_gtk.pm_.c:243
msgid "Next ->"
msgstr "次 ->"

#: ../../my_gtk.pm_.c:486
msgid "Is this correct?"
msgstr "正しく表示出来ましたか？"

#: ../../netconnect.pm_.c:93 ../../netconnect_new.pm_.c:151
msgid "Internet configuration"
msgstr "インターネットの設定"

#: ../../netconnect.pm_.c:94 ../../netconnect_new.pm_.c:152
msgid "Do you want to try to connect to the Internet now?"
msgstr "今インターネットに接続しますか？"

#: ../../netconnect.pm_.c:101 ../../netconnect_new.pm_.c:159
msgid "Testing your connection..."
msgstr "接続をテストしています..."

#: ../../netconnect.pm_.c:106 ../../netconnect_new.pm_.c:164
#, fuzzy
msgid "The system is now connected to Internet."
msgstr "現在はインターネットに接続していません。"

#: ../../netconnect.pm_.c:107 ../../netconnect_new.pm_.c:165
msgid ""
"The system doesn't seem to be connected to internet.\n"
"Try to reconfigure your connection."
msgstr ""
"このマシンはインターネットへつながっていないようですね。\n"
"接続の設定をやりなおしてみてください。"

#: ../../netconnect.pm_.c:141 ../../netconnect.pm_.c:213
#: ../../netconnect.pm_.c:232 ../../netconnect.pm_.c:244
#: ../../netconnect.pm_.c:256 ../../netconnect_new.pm_.c:226
#: ../../netconnect_new.pm_.c:300 ../../netconnect_new.pm_.c:319
#: ../../netconnect_new.pm_.c:331 ../../netconnect_new.pm_.c:343
msgid "ISDN Configuration"
msgstr "ISDNの設定"

#: ../../netconnect.pm_.c:141 ../../netconnect_new.pm_.c:226
msgid ""
"Select your provider.\n"
" If it's not in the list, choose Unlisted"
msgstr ""
"プロバイダを選んでください。\n"
"もしリストになければ、Unlistedを選んでください。"

#: ../../netconnect.pm_.c:158 ../../netconnect_new.pm_.c:245
msgid "Connection Configuration"
msgstr "接続の設定"

#: ../../netconnect.pm_.c:159 ../../netconnect_new.pm_.c:246
msgid "Please fill or check the field below"
msgstr "下のフィールドを埋めるかチェックしてください"

#: ../../netconnect.pm_.c:161 ../../netconnect_new.pm_.c:248
msgid "Card IRQ"
msgstr "カード IRQ"

#: ../../netconnect.pm_.c:162 ../../netconnect_new.pm_.c:249
msgid "Card mem (DMA)"
msgstr "カード mem (DMA)"

#: ../../netconnect.pm_.c:163 ../../netconnect_new.pm_.c:250
msgid "Card IO"
msgstr "カード IO"

#: ../../netconnect.pm_.c:164 ../../netconnect_new.pm_.c:251
msgid "Card IO_0"
msgstr "カード IO_0"

#: ../../netconnect.pm_.c:165 ../../netconnect_new.pm_.c:252
msgid "Card IO_1"
msgstr "カード IO_1"

#: ../../netconnect.pm_.c:166 ../../netconnect_new.pm_.c:253
msgid "Your personal phone number"
msgstr "あなたの電話番号"

#: ../../netconnect.pm_.c:168 ../../netconnect_new.pm_.c:255
msgid "Provider name (ex provider.net)"
msgstr "プロバイダの名前 (例 provider.net)"

#: ../../netconnect.pm_.c:169 ../../netconnect_new.pm_.c:256
msgid "Provider phone number"
msgstr "プロバイダの電話番号"

#: ../../netconnect.pm_.c:170 ../../netconnect_new.pm_.c:257
msgid "Provider dns 1"
msgstr "プロバイダの dns 1"

#: ../../netconnect.pm_.c:171 ../../netconnect_new.pm_.c:258
msgid "Provider dns 2"
msgstr "プロバイダの dns 2"

#: ../../netconnect.pm_.c:172 ../../netconnect_new.pm_.c:259
msgid "Dialing mode"
msgstr "ダイアルモード"

#: ../../netconnect.pm_.c:174 ../../netconnect_new.pm_.c:261
msgid "Account Login (user name)"
msgstr "アカウントログイン（ユーザ名）"

#: ../../netconnect.pm_.c:175 ../../netconnect_new.pm_.c:262
msgid "Account Password"
msgstr "アカウントパスワード"

#: ../../netconnect.pm_.c:176 ../../netconnect_new.pm_.c:263
msgid "Confirm Password"
msgstr "パスワードの設定"

#: ../../netconnect.pm_.c:208 ../../netconnect_new.pm_.c:295
msgid "Europe"
msgstr "ヨーロッパ"

#: ../../netconnect.pm_.c:208 ../../netconnect_new.pm_.c:295
msgid "Europe (EDSS1)"
msgstr "ヨーロッパ (EDSS1)"

#: ../../netconnect.pm_.c:210 ../../netconnect_new.pm_.c:297
msgid "Rest of the world"
msgstr "せかいのその他"

#: ../../netconnect.pm_.c:210 ../../netconnect_new.pm_.c:297
msgid "Rest of the world - no D-Channel (leased lines)"
msgstr "世界のその他 - D-Channel でない(リースされた回線)"

#: ../../netconnect.pm_.c:214 ../../netconnect_new.pm_.c:301
msgid "Which protocol do you want to use ?"
msgstr "どのプロトコルを使いますか？"

#: ../../netconnect.pm_.c:224 ../../netconnect_new.pm_.c:311
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: ../../netconnect.pm_.c:226 ../../netconnect_new.pm_.c:313
msgid "PCI"
msgstr "PCI"

#: ../../netconnect.pm_.c:228 ../../netconnect_new.pm_.c:315
msgid "I don't know"
msgstr "分からない"

#: ../../netconnect.pm_.c:233 ../../netconnect_new.pm_.c:320
msgid "What kind of card do you have?"
msgstr "どんなカードを使っていますか？"

#: ../../netconnect.pm_.c:239 ../../netconnect_new.pm_.c:326
msgid "Continue"
msgstr "続ける"

#: ../../netconnect.pm_.c:241 ../../netconnect_new.pm_.c:328
msgid "Abort"
msgstr "中断"

#: ../../netconnect.pm_.c:245 ../../netconnect_new.pm_.c:332
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
msgstr ""
"\n"
"もしISAカードを持っていたら、次の画面の値が適切でしょう。\n"
"\n"
"もしPCMCIAカードを持っていたら、カードのirqとioを知る必要があります。\n"

#: ../../netconnect.pm_.c:257 ../../netconnect_new.pm_.c:344
msgid "Which is your ISDN card ?"
msgstr "あなたのISDNカードはどれですか？"

#: ../../netconnect.pm_.c:282
msgid "I have found an ISDN Card:\n"
msgstr "ISDNカードをみつけました:\n"

#: ../../netconnect.pm_.c:288 ../../netconnect_new.pm_.c:367
msgid ""
"I have detected an ISDN PCI Card, but I don't know the type. Please select "
"one PCI card on the next screen."
msgstr ""
"ISDN カードを検出しましたが、タイプが分かりません。次の画面から PCI "
"カードを選んでください。"

#: ../../netconnect.pm_.c:300 ../../netconnect_new.pm_.c:379
msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr "ISDN PCI カードは見付かりませんでした。次の画面から選んでください"

#: ../../netconnect.pm_.c:336 ../../netconnect_new.pm_.c:412
msgid ""
"No ethernet network adapter has been detected on your system.\n"
"I cannot set up this connection type."
msgstr ""
"システム上にイーサネットアダプタが見つかりません。この種類の\n"
"接続は設定できません。"

#: ../../netconnect.pm_.c:340 ../../netconnect_new.pm_.c:417
#: ../../standalone/drakgw_.c:222
msgid "Choose the network interface"
msgstr "ネットワークインターフェイスの選択"

#: ../../netconnect.pm_.c:341 ../../netconnect_new.pm_.c:418
msgid ""
"Please choose which network adapter you want to use to connect to Internet"
msgstr "インターネット接続に使うネットワークアダプタを選びましょう"

#: ../../netconnect.pm_.c:356 ../../netconnect.pm_.c:635
#: ../../netconnect.pm_.c:766 ../../netconnect_new.pm_.c:425
#: ../../netconnect_new.pm_.c:777 ../../netconnect_new.pm_.c:908
#: ../../standalone/drakgw_.c:217
msgid "Network interface"
msgstr "ネットワークインターフェイス"

#: ../../netconnect.pm_.c:357 ../../netconnect_new.pm_.c:426
msgid ""
"\n"
"Do you agree?"
msgstr ""
"\n"
"よろしいですね？"

#: ../../netconnect.pm_.c:357 ../../netconnect_new.pm_.c:426
msgid "I'm about to restart the network device:\n"
msgstr "ネットワークデバイスを再起動しますよ:\n"

#: ../../netconnect.pm_.c:473 ../../netconnect_new.pm_.c:512
msgid "ADSL configuration"
msgstr "ADSLの設定"

#: ../../netconnect.pm_.c:474 ../../netconnect_new.pm_.c:513
msgid "Do you want to start your connection at boot?"
msgstr "ブート時に接続しますか？"

#: ../../netconnect.pm_.c:541 ../../netconnect_new.pm_.c:672
msgid "Try to find a modem?"
msgstr "モデムを検索しますか？"

#: ../../netconnect.pm_.c:551 ../../netconnect_new.pm_.c:677
msgid "Please choose which serial port your modem is connected to."
msgstr "モデムはどのシリアルポートにつながっていますか？"

#: ../../netconnect.pm_.c:556 ../../netconnect_new.pm_.c:682
msgid "Dialup options"
msgstr "ダイアルアップオプション"

#: ../../netconnect.pm_.c:557 ../../netconnect_new.pm_.c:683
msgid "Connection name"
msgstr "接続名"

#: ../../netconnect.pm_.c:558 ../../netconnect_new.pm_.c:684
msgid "Phone number"
msgstr "電話番号"

#: ../../netconnect.pm_.c:559 ../../netconnect_new.pm_.c:685
msgid "Login ID"
msgstr "ログイン ID"

#: ../../netconnect.pm_.c:561 ../../netconnect_new.pm_.c:687
msgid "Authentication"
msgstr "認証"

#: ../../netconnect.pm_.c:561 ../../netconnect_new.pm_.c:687
msgid "PAP"
msgstr "PAP"

#: ../../netconnect.pm_.c:561 ../../netconnect_new.pm_.c:687
msgid "Script-based"
msgstr "スクリプトを使う認証"

#: ../../netconnect.pm_.c:561 ../../netconnect_new.pm_.c:687
msgid "Terminal-based"
msgstr "ターミナルからの認証"

#: ../../netconnect.pm_.c:562 ../../netconnect_new.pm_.c:688
msgid "Domain name"
msgstr "ドメイン名"

#: ../../netconnect.pm_.c:564 ../../netconnect_new.pm_.c:690
msgid "First DNS Server"
msgstr "ファースト DNS サーバ"

#: ../../netconnect.pm_.c:565 ../../netconnect_new.pm_.c:691
msgid "Second DNS Server"
msgstr "セカンド DNS サーバ"

#: ../../netconnect.pm_.c:594 ../../netconnect_new.pm_.c:736
msgid ""
"\n"
"You can connect to Internet or reconfigure your connection."
msgstr ""
"\n"
"インターネットへ接続するか接続を再設定してください"

#: ../../netconnect.pm_.c:594 ../../netconnect.pm_.c:598
#: ../../netconnect_new.pm_.c:736 ../../netconnect_new.pm_.c:740
msgid ""
"\n"
"You can reconfigure your connection."
msgstr ""
"\n"
"インターネット接続を再設定できます。"

#: ../../netconnect.pm_.c:594 ../../netconnect_new.pm_.c:736
msgid "You are not currently connected to Internet."
msgstr "現在はインターネットに接続していません。"

#: ../../netconnect.pm_.c:598 ../../netconnect_new.pm_.c:740
msgid ""
"\n"
"You can disconnect or reconfigure your connection."
msgstr ""
"\n"
"接続を切るか、あるいは再設定してください。"

#: ../../netconnect.pm_.c:598 ../../netconnect_new.pm_.c:740
msgid "You are currently connected to internet."
msgstr "インターネットに接続されています。"

#: ../../netconnect.pm_.c:602 ../../netconnect_new.pm_.c:744
msgid "Connect to Internet"
msgstr "インターネットへの接続"

#: ../../netconnect.pm_.c:604 ../../netconnect_new.pm_.c:746
msgid "Disconnect from Internet"
msgstr "インターネットから切断"

#: ../../netconnect.pm_.c:606 ../../netconnect_new.pm_.c:748
msgid "Configure network connection (LAN or Internet)"
msgstr "ネットワーク接続 (LAN/インターネット)の設定"

#: ../../netconnect.pm_.c:609 ../../netconnect_new.pm_.c:751
msgid "Internet connection & configuration"
msgstr "インターネット接続と設定"

#: ../../netconnect.pm_.c:636 ../../netconnect.pm_.c:767
#: ../../netconnect_new.pm_.c:778 ../../netconnect_new.pm_.c:909
msgid ""
"I'm about to restart the network device $netc->{NET_DEVICE}. Do you agree?"
msgstr "ネットワークデバイス $netc->{NET_DEVICE} を再起動します。いいですね？"

#: ../../netconnect.pm_.c:653 ../../netconnect_new.pm_.c:795
msgid "Configure a normal modem connection"
msgstr "ふつうのモデム接続を設定"

#: ../../netconnect.pm_.c:673 ../../netconnect_new.pm_.c:815
msgid "Configure an ISDN connection"
msgstr "ISDN 接続の設定"

#: ../../netconnect.pm_.c:678 ../../netconnect_new.pm_.c:820
msgid "Internal ISDN card"
msgstr "内蔵ISDNカード"

#: ../../netconnect.pm_.c:680 ../../netconnect_new.pm_.c:822
msgid "External ISDN modem"
msgstr "外付 ISDN モデム"

#: ../../netconnect.pm_.c:683 ../../netconnect.pm_.c:717
#: ../../netconnect.pm_.c:729 ../../netconnect.pm_.c:753
#: ../../netconnect.pm_.c:798 ../../netconnect_new.pm_.c:825
#: ../../netconnect_new.pm_.c:859 ../../netconnect_new.pm_.c:871
#: ../../netconnect_new.pm_.c:895 ../../netconnect_new.pm_.c:940
msgid "Connect to the Internet"
msgstr "インターネットへ接続"

#: ../../netconnect.pm_.c:684 ../../netconnect_new.pm_.c:826
msgid "What kind is your ISDN connection?"
msgstr "どの種類のISDN接続ですか？"

#: ../../netconnect.pm_.c:703 ../../netconnect_new.pm_.c:845
msgid "Configure a DSL (or ADSL) connection"
msgstr "DSL (または ADSL) 接続の設定"

#: ../../netconnect.pm_.c:712 ../../netconnect_new.pm_.c:854
msgid "France"
msgstr "フランス"

#: ../../netconnect.pm_.c:714 ../../netconnect_new.pm_.c:856
msgid "Other countries"
msgstr "他の国"

#: ../../netconnect.pm_.c:718 ../../netconnect_new.pm_.c:860
msgid "In which country are you located ?"
msgstr "あなたがいるのはどの国ですか？"

#: ../../netconnect.pm_.c:724 ../../netconnect_new.pm_.c:866
msgid "Alcatel modem"
msgstr "Alcatelモデム"

#: ../../netconnect.pm_.c:726 ../../netconnect_new.pm_.c:868
msgid "ECI modem"
msgstr "ECI モデム"

#: ../../netconnect.pm_.c:730 ../../netconnect_new.pm_.c:872
msgid "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
msgstr ""
"もしadslモデムがalcatel製なら、alcatelを選んでください。そうでなければ\n"
"ECI を選んでください"

#: ../../netconnect.pm_.c:748 ../../netconnect_new.pm_.c:890
msgid "use pppoe"
msgstr "pppoeを使う"

#: ../../netconnect.pm_.c:750 ../../netconnect_new.pm_.c:892
msgid "don't use pppoe"
msgstr "pppoeを使わない"

#: ../../netconnect.pm_.c:754 ../../netconnect_new.pm_.c:896
msgid ""
"The most common way to connect with adsl is dhcp + pppoe.\n"
"However, some connections only use dhcp.\n"
"If you don't know, choose 'use pppoe'"
msgstr ""
"adsl に接続するふつうのやり方は、dhcp + pppoeです。\n"
"でも、dhcpしか使わない接続も一部にはあります。\n"
"わからなければ、'use pppoe'を選んでください。"

#: ../../netconnect.pm_.c:777 ../../netconnect_new.pm_.c:919
msgid "Configure a cable connection"
msgstr "ケーブルテレビ接続の設定"

#: ../../netconnect.pm_.c:799 ../../netconnect_new.pm_.c:941
msgid ""
"Which dhcp client do you want to use?\n"
"Default is dhcpd"
msgstr ""
"どのdhcpクライアントを使いますか？\n"
"デフォルトは dhcpdです"

#: ../../netconnect.pm_.c:812 ../../netconnect_new.pm_.c:954
msgid "Disable Internet Connection"
msgstr "インターネット接続を無効にする"

#: ../../netconnect.pm_.c:823 ../../netconnect_new.pm_.c:965
msgid "Configure local network"
msgstr "LAN 設定"

#: ../../netconnect.pm_.c:827 ../../netconnect_new.pm_.c:969
msgid "Network configuration"
msgstr "ネットワーク設定"

#: ../../netconnect.pm_.c:828 ../../netconnect_new.pm_.c:970
msgid "Do you want to restart the network"
msgstr "ネットワークを再起動してみますか？"

#: ../../netconnect.pm_.c:836 ../../netconnect_new.pm_.c:978
msgid "Disable networking"
msgstr "ネットワークを無効にする"

#: ../../netconnect.pm_.c:846 ../../netconnect_new.pm_.c:988
msgid "Configure the Internet connection / Configure local Network"
msgstr "インターネット接続設定／LAN 設定"

#: ../../netconnect.pm_.c:847 ../../netconnect_new.pm_.c:989
msgid ""
"Local networking has already been configured.\n"
"Do you want to:"
msgstr ""
"ローカルネットワークは設定済みです。\n"
"以下をしたいですか："

#: ../../netconnect.pm_.c:848 ../../netconnect_new.pm_.c:990
msgid "How do you want to connect to the Internet?"
msgstr "どのようにしてインターネットに接続しますか?"

#: ../../netconnect.pm_.c:870 ../../netconnect_new.pm_.c:1012
msgid "Network Configuration"
msgstr "ネットワークの設定"

#: ../../netconnect.pm_.c:871 ../../netconnect_new.pm_.c:1013
msgid ""
"Now that your Internet connection is configured,\n"
"your computer can be configured to share its Internet connection.\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN).\n"
"\n"
"Would you like to setup the Internet Connection Sharing?\n"
msgstr ""
"さあインターネット接続の設定が終わりました。ほかのマシンが\n"
"このマシン経由でインターネットに接続するように設定できます\n"
"注：ローカルエリアネットワーク (LAN) "
"をつくるには、専用のネットワークアダプタが要ります。\n"
"\n"
"インターネット接続の共有を設定しますか？\n"

#: ../../network.pm_.c:253
msgid "no network card found"
msgstr "ネットワークカードが見付かりません"

#: ../../network.pm_.c:273 ../../network.pm_.c:340
msgid "Configuring network"
msgstr "ネットワークの設定"

#: ../../network.pm_.c:274
msgid ""
"Please enter your host name if you know it.\n"
"Some DHCP servers require the hostname to work.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''."
msgstr ""
"ホスト名が分かるなら、それを入力して下さい。\n"
"いくつかのDHCPサーバは動作するのにホスト名を必要とします。\n"
"ホスト名は ``mybox.mylab.myco.com'' のように制限して下さい。"

#: ../../network.pm_.c:278 ../../network.pm_.c:345
msgid "Host name"
msgstr "ホスト名:"

#: ../../network.pm_.c:297
msgid ""
"WARNING: This device has been previously configured to connect to the "
"Internet.\n"
"Simply press OK to keep this device configured.\n"
"Modifying the fields below will override this configuration."
msgstr ""
"警告！: このデバイスは、すでにインターネット接続用に設定されています。\n"
"もとの設定を残したければ、このまま OK を押してください。\n"
"以下のフィールドを変更すると、設定が変わってしまいます。"

#: ../../network.pm_.c:302
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"このマシンの IP アドレスを入力して下さい。\n"
"各々の項目にはドットで区切られた十進数(例，1.2.3.4)がIP "
"アドレスとして入力されます。"

#: ../../network.pm_.c:311 ../../network.pm_.c:312
#, c-format
msgid "Configuring network device %s"
msgstr "ネットワークデバイス %s の設定"

#: ../../network.pm_.c:314
msgid "Automatic IP"
msgstr "IP の自動設定"

#: ../../network.pm_.c:314
msgid "IP address"
msgstr "IP アドレス:"

#: ../../network.pm_.c:314
msgid "Netmask"
msgstr "ネットマスク:"

#: ../../network.pm_.c:315
msgid "(bootp/dhcp)"
msgstr "(bootp/dhcp)"

#: ../../network.pm_.c:321 ../../printerdrake.pm_.c:98
#: ../../printerdrake.pm_.c:420
msgid "IP address should be in format 1.2.3.4"
msgstr "IP アドレスは 1.2.3.4 のように入力して下さい"

#: ../../network.pm_.c:341
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one"
msgstr ""
"ホスト名を入力して下さい。\n"
"ホスト名は ``mybox.mylab.myco.com'' のようにして下さい。\n"
"もしゲートウェイがあれば，その IP アドレスも入力して下さい。"

#: ../../network.pm_.c:346
msgid "DNS server"
msgstr "DNS サーバ:"

#: ../../network.pm_.c:347
msgid "Gateway"
msgstr "ゲートウェイ:"

#: ../../network.pm_.c:348
msgid "Gateway device"
msgstr "ゲートウェイデバイス:"

#: ../../network.pm_.c:358
msgid "Proxies configuration"
msgstr "プロキシの設定"

#: ../../network.pm_.c:359
msgid "HTTP proxy"
msgstr "HTTP proxy"

#: ../../network.pm_.c:360
msgid "FTP proxy"
msgstr "FTP proxy"

#: ../../network.pm_.c:366
msgid "Proxy should be http://..."
msgstr "Proxy は http://... です"

#: ../../network.pm_.c:367
msgid "Proxy should be ftp://..."
msgstr "Proxy は ftp://... です"

#: ../../partition_table.pm_.c:540
msgid "Extended partition not supported on this platform"
msgstr "このマシンでは、拡張パーティションはサポートされていません"

#: ../../partition_table.pm_.c:558
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions"
msgstr ""
"パーティションテーブルに未指定の穴がありますが、使えません。\n"
"どうしても使いたければ、プライマリパーティションを移動して、未指定の穴を\n"
"拡張パーティションの隣にもってきましょう。"

#: ../../partition_table.pm_.c:651
#, c-format
msgid "Error reading file %s"
msgstr "ファイル %s の読みとりエラーです"

#: ../../partition_table.pm_.c:658
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "%s ファイルからの復元が失敗しました： %s"

#: ../../partition_table.pm_.c:660
msgid "Bad backup file"
msgstr "バックアップファイルが壊れています"

#: ../../partition_table.pm_.c:681
#, c-format
msgid "Error writing to file %s"
msgstr "ファイル %s への書き込みエラー"

#: ../../pkgs.pm_.c:20
msgid "mandatory"
msgstr "強制"

#: ../../pkgs.pm_.c:21
msgid "must have"
msgstr "持っているべき"

#: ../../pkgs.pm_.c:22
msgid "important"
msgstr "重要"

#: ../../pkgs.pm_.c:24
msgid "very nice"
msgstr "とても善い"

#: ../../pkgs.pm_.c:25
msgid "nice"
msgstr "善い"

#: ../../pkgs.pm_.c:26 ../../pkgs.pm_.c:27
msgid "interesting"
msgstr "面白い"

#: ../../pkgs.pm_.c:28 ../../pkgs.pm_.c:29 ../../pkgs.pm_.c:30
#: ../../pkgs.pm_.c:31
msgid "maybe"
msgstr "たぶん"

#: ../../pkgs.pm_.c:34
msgid "i18n (important)"
msgstr "i18n (重要)"

#: ../../pkgs.pm_.c:35
msgid "i18n (very nice)"
msgstr "i18n (とても善い)"

#: ../../pkgs.pm_.c:36
msgid "i18n (nice)"
msgstr "i18n (善い)"

#: ../../printer.pm_.c:19
msgid "Local printer"
msgstr "ローカルプリンタ"

#: ../../printer.pm_.c:20
msgid "Remote printer"
msgstr "リモートプリンタ"

#: ../../printer.pm_.c:21 ../../printerdrake.pm_.c:410
msgid "Remote CUPS server"
msgstr "リモートCUPS サーバ"

#: ../../printer.pm_.c:22
msgid "Remote lpd server"
msgstr "リモート lpdサーバ"

#: ../../printer.pm_.c:23
msgid "Network printer (socket)"
msgstr "ネットワークプリンタ（ソケット）"

#: ../../printer.pm_.c:24
msgid "SMB/Windows 95/98/NT"
msgstr "SMB/ウィンドウズ 95/98/NT"

#: ../../printer.pm_.c:25
msgid "NetWare"
msgstr "NetWare"

#: ../../printer.pm_.c:26 ../../printerdrake.pm_.c:154
#: ../../printerdrake.pm_.c:156
msgid "Printer Device URI"
msgstr "プリンタデバイスのURI"

#: ../../printerdrake.pm_.c:19
msgid "Detecting devices..."
msgstr "デバイスの検出中です……"

#: ../../printerdrake.pm_.c:19
msgid "Test ports"
msgstr "ポートのテスト"

#: ../../printerdrake.pm_.c:35
#, c-format
msgid "A printer, model \"%s\", has been detected on "
msgstr "「%s」プリンタが、次のところで見つかりました"

#: ../../printerdrake.pm_.c:48
msgid "Local Printer Device"
msgstr "ローカルプリンタデバイス"

#: ../../printerdrake.pm_.c:49
msgid ""
"What device is your printer connected to \n"
"(note that /dev/lp0 is equivalent to LPT1:)?\n"
msgstr ""
"プリンタがつながっているデバイスは何ですか\n"
"(注意 /dev/lp0 は LPT1: になります)？\n"

#: ../../printerdrake.pm_.c:51
msgid "Printer Device"
msgstr "プリンタデバイス"

#: ../../printerdrake.pm_.c:70
msgid "Remote lpd Printer Options"
msgstr "リモートlpdプリンタオプション"

#: ../../printerdrake.pm_.c:71
msgid ""
"To use a remote lpd print queue, you need to supply\n"
"the hostname of the printer server and the queue name\n"
"on that server which jobs should be placed in."
msgstr ""
"リモートの lpd の プリントキューを使うには，プリンタサーバのホスト名と\n"
"ジョブが置かれるサーバ上のキューの名前が必要になります。."

#: ../../printerdrake.pm_.c:74
msgid "Remote hostname"
msgstr "リモートホスト名"

#: ../../printerdrake.pm_.c:75
msgid "Remote queue"
msgstr "リモートキュー"

#: ../../printerdrake.pm_.c:84
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "SMB (ウィンドウズ 9x/NT) プリンタのオプション"

#: ../../printerdrake.pm_.c:85
msgid ""
"To print to a SMB printer, you need to provide the\n"
"SMB host name (Note! It may be different from its\n"
"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
"well as the share name for the printer you wish to access and any\n"
"applicable user name, password, and workgroup information."
msgstr ""
"SMB プリンタを使うには，SMB ホスト名(注！TCP/IP ホスト名とは別！)と，\n"
"多分プリントサーバの IP アドレス，アクセスしたいプリンタの共有名，\n"
"適切なユーザ名，パスワードおよびワークグループの情報が必要になります。"

#: ../../printerdrake.pm_.c:90
msgid "SMB server host"
msgstr "SMBサーバホスト"

#: ../../printerdrake.pm_.c:91
msgid "SMB server IP"
msgstr "SMBサーバのIP"

#: ../../printerdrake.pm_.c:92
msgid "Share name"
msgstr "シェア名"

#: ../../printerdrake.pm_.c:95
msgid "Workgroup"
msgstr "ワークグループ"

#: ../../printerdrake.pm_.c:120
msgid "NetWare Printer Options"
msgstr "Netware プリンタのオプション"

#: ../../printerdrake.pm_.c:121
msgid ""
"To print to a NetWare printer, you need to provide the\n"
"NetWare print server name (Note! it may be different from its\n"
"TCP/IP hostname!) as well as the print queue name for the printer you\n"
"wish to access and any applicable user name and password."
msgstr ""
"Netware プリンタを使うには，NetWare ホスト名(注！TCP/IP "
"ホスト名とは違う！)と，\n"
"アクセスしたいプリンタのプリントキュー名，適切なユーザ名および\n"
"パスワードが必要になります。"

#: ../../printerdrake.pm_.c:125
msgid "Printer Server"
msgstr "プリンタサーバ"

#: ../../printerdrake.pm_.c:126
msgid "Print Queue Name"
msgstr "印刷キューの名前"

#: ../../printerdrake.pm_.c:138
msgid "Socket Printer Options"
msgstr "ソケットプリンタのオプション"

#: ../../printerdrake.pm_.c:139
msgid ""
"To print to a socket printer, you need to provide the\n"
"hostname of the printer and optionally the port number."
msgstr ""
"ソケットプリンタで印刷するなら、プリンタのホスト名と、場合に\n"
"よってはポート番号が必要になります。"

#: ../../printerdrake.pm_.c:141
msgid "Printer Hostname"
msgstr "プリンタホスト名"

#: ../../printerdrake.pm_.c:142 ../../printerdrake.pm_.c:417
msgid "Port"
msgstr "ポート"

#: ../../printerdrake.pm_.c:155
msgid "You can specify directly the URI to access the printer with CUPS."
msgstr "CUPS でプリンタをアクセスするなら、直接 URI を指定できます。"

#: ../../printerdrake.pm_.c:188 ../../printerdrake.pm_.c:240
msgid "What type of printer do you have?"
msgstr "どんなプリンタを使っていますか？"

#: ../../printerdrake.pm_.c:200 ../../printerdrake.pm_.c:307
msgid "Do you want to test printing?"
msgstr "印刷を試しますか？"

#: ../../printerdrake.pm_.c:203 ../../printerdrake.pm_.c:318
msgid "Printing test page(s)..."
msgstr "テストページ印刷中……"

#: ../../printerdrake.pm_.c:210 ../../printerdrake.pm_.c:326
#, c-format
msgid ""
"Test page(s) have been sent to the printer daemon.\n"
"This may take a little time before printer start.\n"
"Printing status:\n"
"%s\n"
"\n"
"Does it work properly?"
msgstr ""
"テストページをプリンタデーモンに送りました。\n"
"プリンタが動き出すまで、ちょっと時間がかかります。\n"
"印刷のステータス：\n"
"%s\n"
"\n"
"ちゃんと出力されましたか？"

#: ../../printerdrake.pm_.c:214 ../../printerdrake.pm_.c:330
msgid ""
"Test page(s) have been sent to the printer daemon.\n"
"This may take a little time before printer start.\n"
"Does it work properly?"
msgstr ""
"テストページをプリンタデーモンに送りました。\n"
"プリンタが動き出すまで、ちょっと時間がかかります。\n"
"ちゃんと出力されましたか？"

#: ../../printerdrake.pm_.c:230
msgid "Yes, print ASCII test page"
msgstr "ASCIIテストページを印刷してみる"

#: ../../printerdrake.pm_.c:231
msgid "Yes, print PostScript test page"
msgstr "PostScriptテストページを印刷してみる"

#: ../../printerdrake.pm_.c:232
msgid "Yes, print both test pages"
msgstr "テストページを両方とも印刷してみる"

#: ../../printerdrake.pm_.c:239
msgid "Configure Printer"
msgstr "プリンタの設定"

#: ../../printerdrake.pm_.c:272
msgid "Printer options"
msgstr "プリンタオプション"

#: ../../printerdrake.pm_.c:273
msgid "Paper Size"
msgstr "用紙サイズ"

#: ../../printerdrake.pm_.c:274
msgid "Eject page after job?"
msgstr "ジョブの後でページ排出しますか？"

#: ../../printerdrake.pm_.c:279
msgid "Uniprint driver options"
msgstr "Uniprintドライバオプション"

#: ../../printerdrake.pm_.c:280
msgid "Color depth options"
msgstr "色深度オプション"

#: ../../printerdrake.pm_.c:282
msgid "Print text as PostScript?"
msgstr "テキストをPostScriptで印刷しますか？"

#: ../../printerdrake.pm_.c:283
msgid "Reverse page order"
msgstr "最後のページから印刷"

#: ../../printerdrake.pm_.c:285
msgid "Fix stair-stepping text?"
msgstr "文字のジャギーをなおしますか？"

#: ../../printerdrake.pm_.c:288
msgid "Number of pages per output pages"
msgstr "出力ページあたりのページ数"

#: ../../printerdrake.pm_.c:289
msgid "Right/Left margins in points (1/72 of inch)"
msgstr "左右の余白をポイント数（1/72インチ）で指定"

#: ../../printerdrake.pm_.c:290
msgid "Top/Bottom margins in points (1/72 of inch)"
msgstr "上下の余白をポイント数（1/72インチ）で指定"

#: ../../printerdrake.pm_.c:293
msgid "Extra GhostScript options"
msgstr "その他 GhostScriptオプション"

#: ../../printerdrake.pm_.c:296
msgid "Extra Text options"
msgstr "その他テキストオプション"

#: ../../printerdrake.pm_.c:346
msgid "Printer"
msgstr "プリンタ"

#: ../../printerdrake.pm_.c:347
msgid "Would you like to configure a printer?"
msgstr "プリンタの設定をしますか？"

#: ../../printerdrake.pm_.c:350
msgid ""
"Here are the following print queues.\n"
"You can add some more or change the existing ones."
msgstr ""
"以下の印刷キューがあります。\n"
"印刷キューを追加・変更できます。"

#: ../../printerdrake.pm_.c:365
msgid "CUPS starting"
msgstr "CUPS 開始"

#: ../../printerdrake.pm_.c:365
msgid "Reading CUPS drivers database..."
msgstr "CUPS ドライバデータベースを読んでいます..."

#: ../../printerdrake.pm_.c:379 ../../printerdrake.pm_.c:444
#: ../../printerdrake.pm_.c:457 ../../printerdrake.pm_.c:464
msgid "Select Printer Connection"
msgstr "プリンタの接続を選んでください"

#: ../../printerdrake.pm_.c:380 ../../printerdrake.pm_.c:458
msgid "How is the printer connected?"
msgstr "プリンタはどうつながっていますか？"

#: ../../printerdrake.pm_.c:387
msgid "Select Remote Printer Connection"
msgstr "リモートプリンタの接続を選んでください"

#: ../../printerdrake.pm_.c:388
msgid ""
"With a remote CUPS server, you do not have to configure\n"
"any printer here; printers will be automatically detected.\n"
"In case of doubt, select \"Remote CUPS server\"."
msgstr ""
"リモート CUPS サーバの場合、ここではプリンタの設定は不要です。\n"
"プリンタは自動検出されます。もし信用できないと思ったら、\n"
"「リモートCUPS サーバ」を選びましょう。"

#: ../../printerdrake.pm_.c:411
#, fuzzy
msgid ""
"With a remote CUPS server, you do not have to configure\n"
"any printer here; printers will be automatically detected\n"
"unless you have a server on a different network; in the\n"
"latter case, you have to give the CUPS server IP address\n"
"and optionally the port number."
msgstr ""
"リモート CUPS サーバの場合、ここではプリンタの設定は不要です。\n"
"プリンタは自動検出されます。もし信用できないと思ったら、\n"
"「リモートCUPS サーバ」を選びましょう。"

#: ../../printerdrake.pm_.c:416
#, fuzzy
msgid "CUPS server IP"
msgstr "SMBサーバのIP"

#: ../../printerdrake.pm_.c:424
msgid "Port number should be numeric"
msgstr ""

#: ../../printerdrake.pm_.c:445 ../../printerdrake.pm_.c:464
msgid "Remove queue"
msgstr "キューの削除"

#: ../../printerdrake.pm_.c:446
msgid ""
"Every printer need a name (for example lp).\n"
"Other parameters such as the description of the printer or its location\n"
"can be defined. What name should be used for this printer and\n"
"how is the printer connected?"
msgstr ""
"プリンタはそれぞれ名前が要ります（たとえばlp)。\n"
"ほかにも、プリンタの種類やマシンへのつながりかたなどのパラメータが\n"
"設定できます。このプリンタはなんという名前にしますか？ "
"そしてマシンとはどうつながっていますか？"

#: ../../printerdrake.pm_.c:450
msgid "Name of printer"
msgstr "プリンタの名前"

#: ../../printerdrake.pm_.c:451
msgid "Description"
msgstr "プリンタの説明"

#: ../../printerdrake.pm_.c:452
msgid "Location"
msgstr "プリンタの場所"

#: ../../printerdrake.pm_.c:465
msgid ""
"Every print queue (which print jobs are directed to) needs a\n"
"name (often lp) and a spool directory associated with it. What\n"
"name and directory should be used for this queue and how is the printer "
"connected?"
msgstr ""
"あらゆるプリントキュー(プリントジョブが管理される)は名前(たいていは\n"
" lp)とそれに関連しているスプールディレクトリが必要です。このキューで\n"
"使う名前とディレクトリは何にしますか？\n"
"またプリンタはどう接続されていますか？"

#: ../../printerdrake.pm_.c:468
msgid "Name of queue"
msgstr "キューの名前："

#: ../../printerdrake.pm_.c:469
msgid "Spool directory"
msgstr "スプールのディレクトリ："

#: ../../printerdrake.pm_.c:470
msgid "Printer Connection"
msgstr "プリンタの接続方式"

#: ../../raid.pm_.c:32
#, c-format
msgid "Can't add a partition to _formatted_ RAID md%d"
msgstr "フォーマット済みの RAID md%d にはパーティションを追加できません"

#: ../../raid.pm_.c:102
msgid "Can't write file $file"
msgstr "$file ファイルが書き込めません"

#: ../../raid.pm_.c:127
msgid "mkraid failed"
msgstr "mkraid に失敗"

#: ../../raid.pm_.c:127
msgid "mkraid failed (maybe raidtools are missing?)"
msgstr "mkraid に失敗 (raidtools が入ってないのかも?)"

#: ../../raid.pm_.c:143
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "RAID レベル %d のためにはパーティションが不足です\n"

#: ../../services.pm_.c:15
msgid "Anacron a periodic command scheduler."
msgstr "Anacron は周期的なコマンドスケジューラです。"

#: ../../services.pm_.c:16
msgid ""
"apmd is used for monitoring batery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd はバッテリーの状態を調べてそれをsyslog経由で記録します。\n"
"電池がなくなったときにマシンをシャットダウンするのにも使えます。"

#: ../../services.pm_.c:18
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""
"atコマンドでスケジュールされたコマンドを、at実行時に指定した時間に\n"
"実行して、平均負荷が低いときにバッチコマンドを実行します。"

#: ../../services.pm_.c:20
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"cronはUNIX標準のプログラムで、ユーザ指定のプログラムを定期的に\n"
"実行します。vixie cronは標準のUNIX cronに高度なセキュリティや\n"
"強力な設定オプションなどの機能を追加しています。"

#: ../../services.pm_.c:23
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM はMidnight CommanderなどテキストベースのLinuxソフトでマウスが\n"
"使えるようにします。マウスによるコンソールでのカット・ペースト\n"
"や、ポップアップメニューも使えます。"

#: ../../services.pm_.c:26
msgid ""
"Apache is a World Wide Web server.  It is used to serve HTML files\n"
"and CGI."
msgstr "ApacheはWorld Wide Webサーバで、HTML ファイルやCGIの公開に使います。"

#: ../../services.pm_.c:28
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"インターネット・スーパーサーバ・デーモン (通称inetd) は、必要に\n"
"応じてその他各種インターネットサービスを開始します。telnet、ftp、\n"
"rsh、rloginなどのサービス開始を担当します。inetdを無効にすると、\n"
"こうした各種サービスすべてが無効になります。"

#: ../../services.pm_.c:32
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"このパッケージは、/etc/sysconfig/keyboardから設定したキーボードマップを\n"
"ロードします。これはkbdconfigユーティリティを使って設定します。通常は\n"
"有効にしておきましょう。"

#: ../../services.pm_.c:35
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
"lpd はプリンタデーモンで、lprの動作に必要です。基本的に\n"
"はプリンタに印刷ジョブを振り分けるサーバです。"

#: ../../services.pm_.c:37
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
"host names to IP addresses."
msgstr ""
"named (BIND) は、IPアドレスとホスト名を結びつけるためのドメイン名\n"
"サーバ（Domain Name Server, DNS) です。"

#: ../../services.pm_.c:39
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"ネットワークファイルシステム (NFS), SMB (LanManager/Windows),\n"
"NCP (NetWare) マウントポイントをすべてマウント・アンマウントします。"

#: ../../services.pm_.c:41
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"起動時に有効にする設定のネットワークインターフェースをすべて、\n"
"有効・無効にします。"

#: ../../services.pm_.c:43
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS はTCP/IPネットワーク上でファイル共有をするのによく使うプロトコル\n"
"です。このサービスは NFS サーバ機能を提供します。設定には/etc/exports \n"
"ファイルを使います。"

#: ../../services.pm_.c:46
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS はTCP/IPネットワーク上でファイル共有をするのによく使うプロトコル\n"
"です。このサービスは NFS ファイルロック機能を提供します。"

#: ../../services.pm_.c:48
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It won't get started unless configured so it is safe to "
"have\n"
"it installed on machines that don't need it."
msgstr ""
"PCMCIA サポートは、ラップトップコンピュータでEthernetやモデム\n"
"などのPCカードを使えるようにするためのものです。設定するまで\n"
"は起動しないので、必要ないマシンに入れてあっても安全です。"

#: ../../services.pm_.c:51
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"portmapper は RPC 接続を管理します。これはNFSやNISなどのプロトコルで\n"
"使用されます。RPC機構を使うプロトコルのサーバとなるマシンでは、この\n"
"portmap サーバが動いている必要があります。"

#: ../../services.pm_.c:54
msgid ""
"Postfix is a Mail Transport Agent, which is the program that\n"
"moves mail from one machine to another."
msgstr ""
"Postfix はメール転送エージェントです (MTA) です。これは、マシン間で\n"
"メールをやりとりするプログラムです。"

#: ../../services.pm_.c:56
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""
"乱数発生の質を上げるために、システムのエントロピープールを保存・\n"
"復活させます。"

#: ../../services.pm_.c:58
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""
"routed デーモンは、RIPプロトコルを使ってIPテーブルの自動更新を\n"
"可能にします。RIP は小規模ネットワークでは便利でよく使われますが、\n"
"ネットワークが複雑になってくると、これでは不十分です。"

#: ../../services.pm_.c:61
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""
"rstatプロトコルを使うと、ネットワーク上のユーザが、そのネットワーク\n"
"に接続したマシンのすべてについて、性能指標を得られるようになります。"

#: ../../services.pm_.c:63
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""
"rusersプロトコルでは、ネットワーク上のユーザが、応答するほかのマシン\n"
"にログインしている人たちを見ることができます。"

#: ../../services.pm_.c:65
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
"rwho デーモンが走っているマシンでは、そのマシンにログイン中の\n"
"ユーザ一覧をrwhoプロトコル経由で見られます (fingerに似ています)。"

#: ../../services.pm_.c:67
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""
"Syslog は、各種のデーモンがいろんなログファイルにメッセージを記録\n"
"するときに使います。ずっと起動しておくほうがいいでしょう。"

#: ../../services.pm_.c:69
msgid "This startup script try to load your modules for your usb mouse."
msgstr "この起動スクリプトはUSBマウス用のモジュールをロードします。"

#: ../../services.pm_.c:70
msgid "Starts and stops the X Font Server at boot time and shutdown."
msgstr "起動時/シャットダウン時に、Xフォントサーバを開始/停止します。"

#: ../../services.pm_.c:99
msgid "Choose which services should be automatically started at boot time"
msgstr "起動時に自動的にたちあげるサービスを選んでください"

#: ../../standalone/diskdrake_.c:61
msgid ""
"I can't read your partition table, it's too corrupted for me :(\n"
"I'll try to go on blanking bad partitions"
msgstr ""
"パーティションテーブルが読めません，壊れているようです:(\n"
"不正なパーティションを空白で埋めようとします"

#: ../../standalone/drakboot_.c:25
msgid "Configure LILO/GRUB"
msgstr "LILO/GRUB の設定"

#: ../../standalone/drakboot_.c:26
msgid "Create a boot floppy"
msgstr "起動ディスク作成"

#: ../../standalone/drakboot_.c:28
msgid "Format floppy"
msgstr "フロッピーをフォーマット"

#: ../../standalone/drakboot_.c:40
msgid "Choice"
msgstr "選択"

#: ../../standalone/drakboot_.c:59
msgid "Installation of LILO failed. The following error occured:"
msgstr "LILO のインストールに失敗しました。以下のエラーが発生:"

#: ../../standalone/drakgw_.c:103
msgid "Internet Connection Sharing currently enabled"
msgstr "インターネット接続共有は現在有効"

#: ../../standalone/drakgw_.c:104
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"インターネット接続共有のセットアップはすでに完了。\n"
"有効になっています。\n"
"\n"
"どうしますか？"

#: ../../standalone/drakgw_.c:107 ../../standalone/drakgw_.c:108
msgid "disable"
msgstr "無効に"

#: ../../standalone/drakgw_.c:107 ../../standalone/drakgw_.c:118
#: ../../standalone/drakgw_.c:126 ../../standalone/drakgw_.c:137
msgid "dismiss"
msgstr "無視"

#: ../../standalone/drakgw_.c:107 ../../standalone/drakgw_.c:126
msgid "reconfigure"
msgstr "再設定"

#: ../../standalone/drakgw_.c:122
msgid "Internet Connection Sharing currently disabled"
msgstr "インターネット接続共有は現在無効です"

#: ../../standalone/drakgw_.c:123
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"インターネット接続共有のセットアップはすでに完了。\n"
"無効になっています。\n"
"\n"
"どうしますか？"

#: ../../standalone/drakgw_.c:126 ../../standalone/drakgw_.c:127
msgid "enable"
msgstr "有効に"

#: ../../standalone/drakgw_.c:141
msgid "Config file content could not be interpreted."
msgstr "設定ファイルの内容が解釈できない。"

#: ../../standalone/drakgw_.c:151
msgid "Internet Connection Sharing"
msgstr "プリンタの共有接続"

#: ../../standalone/drakgw_.c:152
msgid ""
"Your computer can be configured to share its Internet connection.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN).\n"
"\n"
"Would you like to setup the Internet Connection Sharing?"
msgstr ""
"このマシンのインターネット接続を共有するように設定できます。\n"
"\n"
"注：ローカルエリアネットワーク (LAN) "
"をつくるには、専用のネットワークアダプタが要ります。\n"
"\n"
"インターネット接続の共有を設定しますか？"

#: ../../standalone/drakgw_.c:177
msgid "using module"
msgstr "モジュールを使用"

#: ../../standalone/drakgw_.c:210
msgid "No network adapter on your system!"
msgstr "ネットワークアダプタがありません！"

#: ../../standalone/drakgw_.c:211
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr ""
"システム上にイーサネットアダプタが見つかりません。ハードウェア設定ツールを実�"
"圓気擦討�世気ぁ�"

#: ../../standalone/drakgw_.c:218
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"$interface\n"
"\n"
"Would you like to setup your Local Area Network with that adapter?"
msgstr ""
"システムには設定されたネットワークアダプタがひとつしかありません：\n"
"\n"
"$interface\n"
"\n"
"このアダプタで LAN に接続しますか？"

#: ../../standalone/drakgw_.c:223
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr ""
"ローカルエリアネットワークにつながるネットワークアダプタを\n"
"選んでください。"

#: ../../standalone/drakgw_.c:233
msgid ""
"Warning, the network adapter is already configured.\n"
"Would you like to reconfigure?"
msgstr ""
"ネットワークアダプタはもう設定がすんでいます。\n"
"設定をやりなおしますか？"

#: ../../standalone/drakgw_.c:258
msgid "Potential LAN address conflict found in current config of $_!\n"
msgstr "現在の$_の設定ではLANアドレスが衝突するかもしれません！\n"

#: ../../standalone/drakgw_.c:268
msgid "Firewalling configuration detected!"
msgstr "ファイアウォールの設定を検出！"

#: ../../standalone/drakgw_.c:269
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fix after installation. Proceed?"
msgstr ""
"警告！ファイヤウォールの設定を検出。インストール後に、手動で手直しが要るかも�"
"靴譴泙擦鵝Ｂ海韻泙垢��"

#: ../../standalone/drakgw_.c:282
msgid "Configuring scripts, installing software, starting servers..."
msgstr "スクリプトの設定、ソフトウェアのインストール、サーバの起動..."

#: ../../standalone/drakgw_.c:282
msgid "Configuring..."
msgstr "設定中..."

#: ../../standalone/drakgw_.c:313
msgid "Problems installing package $bin2rpm{$_}"
msgstr ""

#: ../../standalone/drakgw_.c:504
msgid "Congratulations!"
msgstr "おめでとうございます！"

#: ../../standalone/drakgw_.c:505
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP)."
msgstr ""
"設定がすべて終わりました。\n"
"これで自動ネットワーク設定（dhcp) を使って、LAN "
"上の他のマシンとインターネット接続を共有できます。"

#: ../../standalone/draksec_.c:28
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive: it must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"このレベルを使うなら注意が必要です。システムを使うのは簡単になりますが、\n"
"だれにでもアクセスできてしまいます。他のマシンに接続したり、インターネット\n"
"につながったりしたマシンでは使わないでください。パスワード制限もありません。"

#: ../../standalone/draksec_.c:31
msgid ""
"Password are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""
"パスワードが有効になりましたが、ネットワークにつなぐのはまだ\n"
"お奨めできません。"

#: ../../standalone/draksec_.c:32
msgid ""
"Few improvements for this security level, the main one is that there are\n"
"more security warnings and checks."
msgstr ""
"このセキュリティレベルはちょっとよくなっていて、警告やチェックが\n"
"増えています。"

#: ../../standalone/draksec_.c:34
msgid ""
"This is the standard security recommended for a computer that will be used\n"
"to connect to the Internet as a client. There are now security checks. "
msgstr ""
"これは標準のセキュリティで、クライアントとしてインターネット接続する\n"
"マシンでの推奨レベルです。セキュリティチェックが行われます。"

#: ../../standalone/draksec_.c:36
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which accept\n"
"connections from many clients. "
msgstr ""
"このセキュリティレベルだと、システムをサーバとして使えるようになります。\n"
"多数のクライアントから接続を受けるサーバとしても使えるだけのセキュリティ\n"
"水準になっています。"

#: ../../standalone/draksec_.c:39
msgid ""
"We take level 4 features, but now the system is entirely closed.\n"
"Security features are at their maximum."
msgstr ""
"レベル4 のセキュリティ機能にしましたが、これでシステムは完全にとじた状態\n"
"になっています。セキュリティは最大です。"

#: ../../standalone/draksec_.c:49
msgid "Setting security level"
msgstr "セキュリティレベルの設定中"

#: ../../standalone/drakxconf_.c:21
msgid "Choose the tool you want to use"
msgstr "使用するツールを選んで下さい"

#: ../../standalone/keyboarddrake_.c:14
msgid "usage: keyboarddrake [--expert]\n"
msgstr ""

#: ../../standalone/keyboarddrake_.c:27
msgid "Do you want the BackSpace to return Delete in console?"
msgstr ""

#: ../../standalone/livedrake_.c:23
msgid "Change Cd-Rom"
msgstr "CD-ROMを入れ替えてください"

#: ../../standalone/livedrake_.c:24
msgid ""
"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
"インストールCD をドライブにいれて、 Ok を押してください。\n"
"CDがなければ、Cancel を押してライブアップグレードを回避して下さい。"

#: ../../standalone/livedrake_.c:34
msgid "Unable to start live upgrade !!!\n"
msgstr "ライブあっぷっぐれーどを開始できません!!!\n"

#: ../../standalone/mousedrake_.c:32
msgid "no serial_usb found\n"
msgstr "serial_usbが見つかりません\n"

#: ../../standalone/mousedrake_.c:37
msgid "Emulate third button?"
msgstr "真中ボタンをエミュレートしますか？"

#: ../../standalone/mousedrake_.c:41
msgid "Which serial port is your mouse connected to?"
msgstr "マウスはどのシリアルポートにつながっていますか？"

#: ../../standalone/rpmdrake_.c:25
msgid "reading configuration"
msgstr "設定を読みとっています"

#: ../../standalone/rpmdrake_.c:45 ../../standalone/rpmdrake_.c:50
#: ../../standalone/rpmdrake_.c:253
msgid "File"
msgstr "ファイル"

#: ../../standalone/rpmdrake_.c:48 ../../standalone/rpmdrake_.c:229
#: ../../standalone/rpmdrake_.c:253 ../../standalone/rpmdrake_.c:269
msgid "Search"
msgstr "検索"

#: ../../standalone/rpmdrake_.c:49 ../../standalone/rpmdrake_.c:56
msgid "Package"
msgstr "パッケージ"

#: ../../standalone/rpmdrake_.c:51
msgid "Text"
msgstr "テキスト"

#: ../../standalone/rpmdrake_.c:53
msgid "Tree"
msgstr "ツリー"

#: ../../standalone/rpmdrake_.c:54
msgid "Sort by"
msgstr "以下のキーでソート："

#: ../../standalone/rpmdrake_.c:55
msgid "Category"
msgstr "種類"

#: ../../standalone/rpmdrake_.c:58
msgid "See"
msgstr "以下を参照："

#: ../../standalone/rpmdrake_.c:59 ../../standalone/rpmdrake_.c:163
msgid "Installed packages"
msgstr "インストール済みのパッケージ"

#: ../../standalone/rpmdrake_.c:60
msgid "Available packages"
msgstr "インストールしていないパッケージ"

#: ../../standalone/rpmdrake_.c:62
msgid "Show only leaves"
msgstr "詳細部分だけ表示"

#: ../../standalone/rpmdrake_.c:67
msgid "Expand all"
msgstr "ツリーを完全にのばしきる"

#: ../../standalone/rpmdrake_.c:68
msgid "Collapse all"
msgstr "ツリーを完全に縮める"

#: ../../standalone/rpmdrake_.c:70
msgid "Configuration"
msgstr "設定"

#: ../../standalone/rpmdrake_.c:71
msgid "Add location of packages"
msgstr "パッケージの位置を追加表示"

#: ../../standalone/rpmdrake_.c:75
msgid "Update location"
msgstr "アップデートする位置"

#: ../../standalone/rpmdrake_.c:79 ../../standalone/rpmdrake_.c:328
msgid "Remove"
msgstr "削除"

#: ../../standalone/rpmdrake_.c:100
msgid "Configuration: Add Location"
msgstr "設定：位置を追加"

#: ../../standalone/rpmdrake_.c:103
msgid "Find Package"
msgstr "パッケージの検索"

#: ../../standalone/rpmdrake_.c:104
msgid "Find Package containing file"
msgstr "以下のファイルを含むパッケージの検索："

#: ../../standalone/rpmdrake_.c:105
msgid "Toggle between Installed and Available"
msgstr "インストール済みと未インストールを切り替え"

#: ../../standalone/rpmdrake_.c:139
msgid "Files:\n"
msgstr "ファイル:\n"

#: ../../standalone/rpmdrake_.c:161 ../../standalone/rpmdrake_.c:209
msgid "Uninstall"
msgstr "アンインストール"

#: ../../standalone/rpmdrake_.c:163
msgid "Choose package to install"
msgstr "インストールしたいパッケージの選択"

#: ../../standalone/rpmdrake_.c:190
msgid "Checking dependencies"
msgstr "パッケージの依存関係を調べています"

#: ../../standalone/rpmdrake_.c:190 ../../standalone/rpmdrake_.c:409
msgid "Wait"
msgstr "少々お待ちを"

#: ../../standalone/rpmdrake_.c:209
msgid "The following packages are going to be uninstalled"
msgstr "以下のパッケージはアンインストールできません"

#: ../../standalone/rpmdrake_.c:210
msgid "Uninstalling the RPMs"
msgstr "パッケージをのアンインストールしています"

#: ../../standalone/rpmdrake_.c:229 ../../standalone/rpmdrake_.c:269
msgid "Regexp"
msgstr "正規表現"

#: ../../standalone/rpmdrake_.c:229
msgid "Which package are looking for"
msgstr "どのパッケージをさがしていますか"

#: ../../standalone/rpmdrake_.c:238 ../../standalone/rpmdrake_.c:262
#: ../../standalone/rpmdrake_.c:278
#, c-format
msgid "%s not found"
msgstr "%s が見つかりません"

#: ../../standalone/rpmdrake_.c:238 ../../standalone/rpmdrake_.c:262
#: ../../standalone/rpmdrake_.c:278
msgid "No match"
msgstr "一致するものがありません"

#: ../../standalone/rpmdrake_.c:238 ../../standalone/rpmdrake_.c:262
#: ../../standalone/rpmdrake_.c:278
msgid "No more match"
msgstr "これ以上はみつかりません"

#: ../../standalone/rpmdrake_.c:246
msgid ""
"rpmdrake is currently in ``low memory'' mode.\n"
"I'm going to relaunch rpmdrake to allow searching files"
msgstr ""
"rpmdrake は現在、メモリ不足になっています。\n"
"一回rpmdrakeをたちあげなおして、ファイルの検索を続けますね"

#: ../../standalone/rpmdrake_.c:253
msgid "Which file are you looking for?"
msgstr "どのファイルをさがしていますか"

#: ../../standalone/rpmdrake_.c:269
msgid "What are looking for?"
msgstr "なにをさがしていますか"

#: ../../standalone/rpmdrake_.c:289
msgid "Give a name (eg: `extra', `commercial')"
msgstr "名前を入力してください（例：「エキストラ」「商用」）"

#: ../../standalone/rpmdrake_.c:291
msgid "Directory"
msgstr "ディレクトリ"

#: ../../standalone/rpmdrake_.c:294
msgid "No cdrom available (nothing in /mnt/cdrom)"
msgstr "CDROMが見つかりません（/mnt/cdromになにもありません）"

#: ../../standalone/rpmdrake_.c:298
msgid "URL of the directory containing the RPMs"
msgstr "RPMパッケージのあるディレクトリのURL"

#: ../../standalone/rpmdrake_.c:299
msgid ""
"For FTP and HTTP, you need to give the location for hdlist\n"
"It must be relative to the URL above"
msgstr ""
"FTP と HTTPについては、hdlistの位置を指定しなくてはなりません。\n"
"上のURLとの相対位置で指定します"

#: ../../standalone/rpmdrake_.c:302
msgid "Please submit the following information"
msgstr "以下の情報を入力してください"

#: ../../standalone/rpmdrake_.c:304
#, c-format
msgid "%s is already in use"
msgstr "%s はすでに使われています"

#: ../../standalone/rpmdrake_.c:315 ../../standalone/rpmdrake_.c:321
#: ../../standalone/rpmdrake_.c:329
msgid "Updating the RPMs base"
msgstr "RPMのベースを更新中"

#: ../../standalone/rpmdrake_.c:328
#, c-format
msgid "Going to remove entry %s"
msgstr "エントリ %s を消します"

#: ../../standalone/rpmdrake_.c:360
msgid "Finding leaves"
msgstr "ツリーの詳細を検索中"

#: ../../standalone/rpmdrake_.c:360
msgid "Finding leaves takes some time"
msgstr "ツリーの詳細を見つけるのは時間がかかります"

# ../../share/compssUsers
msgid "Graphics Manipulation"
msgstr "画像操作"

# ../../share/compssUsers
msgid "KDE, QT, Gnome, GTK+"
msgstr ""

# ../../share/compssUsers
msgid "Personnal Finance"
msgstr "個人の財務管理"

# ../../share/compssUsers
msgid "Python, Perl, libraries, tools"
msgstr ""

# ../../share/compssUsers
msgid "Scientific applications"
msgstr ""

# ../../share/compssUsers
msgid "Databases"
msgstr "データベース"

msgid "Internet"
msgstr "インターネット"

msgid "Multimedia - Graphics"
msgstr "マルチメディア　画像"

# ../../share/compssUsers
msgid "editors, shells, file tools, terminals"
msgstr ""

#, fuzzy
msgid "Development applications"
msgstr "開発用"

# ../../share/compssUsers
msgid "Audio-related tools: mp3 or midi players, mixers, etc"
msgstr "オーディオ関連ツール：mp3, midi, ミキサーなど"

msgid "Multimedia"
msgstr "マルチメディア"

msgid "Office"
msgstr "オフィス関連"

# ../../share/compssUsers
msgid "Sciences"
msgstr ""

# ../../share/compssUsers
msgid ""
"Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and file "
"transfer tools"
msgstr ""
"xchat, licq, gaimなどのチャット用ソフト (IRC やインスタントメッセージ) "
"とファイル転送ツール"

# ../../share/compssUsers
msgid ""
"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
"browse the Web"
msgstr ""
"メールやニュースの送受信用ツール (pine, mutt, tin..) と、Webブラウズ用ツール"

# ../../share/compssUsers
msgid "C and C++ development libraries, programs and include files"
msgstr ""

# ../../share/compssUsers
msgid "Communication facilities"
msgstr "通信関連"

msgid "KDE"
msgstr "KDE"

# ../../share/compssUsers
msgid "Personnal Information Management"
msgstr "個人情報管理"

# ../../share/compssUsers
msgid "Programs to manage your finance, such as gnucash"
msgstr "gnucashなどの家計管理ソフト"

msgid "Gnome"
msgstr "Gnome"

msgid "Internet Tools"
msgstr "インターネットツール"

msgid "Documentation"
msgstr "ドキュメンテーション"

# ../../share/compssUsers
msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwmなど"

# ../../share/compssUsers
msgid "Utilities"
msgstr ""

msgid "Multimedia - Sound"
msgstr "マルチメディア　サウンド"

# ../../share/compssUsers
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr "娯楽ソフト：テレビゲーム、ボードゲーム、戦略ゲームなど"

# ../../share/compssUsers
msgid "Video players and editors"
msgstr "ビデオプレーヤや編集ソフト"

# ../../share/compssUsers
msgid "Console Tools"
msgstr ""

#, fuzzy
msgid "Development other"
msgstr "開発用"

# ../../share/compssUsers
msgid "Databases clients and servers (mysql and postgresql)"
msgstr "データベースクライアントとサーバ (mysql, postgresql)"

# ../../share/compssUsers
msgid "Sound and video playing/editing programs"
msgstr "サウンドやビデオの再生編集ソフト"

# ../../share/compssUsers
msgid "Books and Howto's on Linux and Free Software"
msgstr "Linux やフリーソフト関連の本やハウツー文書"

# ../../share/compssUsers
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr ""
"使いやすいアプリケーションやデスクトップツールを持つ、グラフィクスのユーザ環�"
"�"

# ../../share/compssUsers
msgid "Games"
msgstr "ゲーム"

#, fuzzy
msgid "Development C/C++"
msgstr "開発用"

#, fuzzy
msgid "Multimedia - Video"
msgstr "マルチメディア"

# ../../share/compssUsers
msgid "Graphics programs such as The Gimp"
msgstr "The Gimpなどの画像処理ソフト"

# ../../share/compssUsers
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr "K デスクトップ環境。基本的なグラフィスク環境に、関連ツール詰め合わせ"

# ../../share/compssUsers
msgid "Tools to create and burn CD's"
msgstr "CD をつくって焼くツール"

# ../../share/compssUsers
msgid "More Graphical Desktops (Gnome, IceWM)"
msgstr "グラフィカルなデスクトップをもっと"

msgid "Multimedia - CD Burning"
msgstr "マルチメディア　CD を焼く"

# ../../share/compssUsers
msgid "Archiving, emulators, monitoring"
msgstr ""

# ../../share/compssUsers
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""
"オフィス系ソフト: ワープロ (kword, abiword), 表計算 (kspread, gnumeric), pdf "
"ビューアなど"

# ../../share/compssUsers
msgid "Other Graphical Desktops"
msgstr "その他グラフィックデスクトップ"

# ../../share/compssUsers
msgid "Tools for your Palm Pilot or your Visor"
msgstr "Palm Pilot や Visor用ツール"

# ../../share/compssUsers
msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm など"

# ../../share/compssUsers
msgid "Set of tools for mail, news, web, file transfer, and chat"
msgstr "メール、ニュース、web, ファイル転送、チャットなどのツール"

#~ msgid "Czech"
#~ msgstr "チェコ"

#~ msgid "Slovakian"
#~ msgstr "スロバキア"

#~ msgid "Could not install ipchains RPM with urpmi."
#~ msgstr "ipchains RPM を urpmi でインストールできません。"

#~ msgid "Could not install dhcp RPM with urpmi."
#~ msgstr "dhcp RPM を urpmi でインストールできません。"

#~ msgid "Could not install linuxconf RPM with urpmi."
#~ msgstr "linuxconf RPM を urpmi でインストールできません。"

#~ msgid "Could not install bind RPM with urpmi."
#~ msgstr "bind RPM を urpmi でインストールできません。"

#~ msgid "Could not install caching-nameserver RPM with urpmi."
#~ msgstr "caching-nameserver RPM を urpmi でインストールできません。"

#~ msgid ""
#~ "The system is now connected to Internet! Congratulation.\n"
#~ "Feel free to launch draknet at any time to setup your connection.\n"
#~ msgstr ""
#~ "マシンは無事インターネットに接続されました。おめでとう！\n"
#~ "接続設定には、いつでも draknet を起動してください。\n"

# NOTE: this message will be displayed at boot time; that is
# only the ascii charset will be available on most machines
# so use only 7bit for this message (and do transliteration or
# leave it in English, as it is the best for your language)
# 
#~ msgid ""
#~ "Welcome to %s the operating system chooser!\n"
#~ "\n"
#~ msgstr ""
#~ "%s operating system chooser-he youkosou!\n"
#~ "\n"

#~ msgid "Reconfigure local network"
#~ msgstr "LAN を再設定する"

#~ msgid ""
#~ " Introduction\n"
#~ "\n"
#~ "The operating system and the different components available in the "
#~ "Linux-Mandrake distribution \n"
#~ "shall be called the \"Software Products\" hereafter. The Software Products "
#~ "include, but are not \n"
#~ "restricted to, the set of programs, methods, rules and documentation related "
#~ "to the operating \n"
#~ "system and the different components of the Linux-Mandrake distribution.\n"
#~ "\n"
#~ "\n"
#~ "1. License Agreement\n"
#~ "\n"
#~ "Please read carefully this document. This document is a license agreement "
#~ "between you and  \n"
#~ "MandrakeSoft S.A., 43, rue d'Aboukir, 75002 Paris - France, which applies to "
#~ "the Software Products.\n"
#~ "By installing, duplicating or using the Software Products in any manner, you "
#~ "explicitly \n"
#~ "accept and fully agree to conform to the terms and conditions of this "
#~ "License. \n"
#~ "If you disagree with any portion of the License, you are not allowed to "
#~ "install, duplicate or use \n"
#~ "the Software Products. \n"
#~ "Any attempt to install, duplicate or use the Software Products in a manner "
#~ "which does not comply \n"
#~ "with the terms and conditions of this License is void and will terminate "
#~ "your rights under this \n"
#~ "License. Upon termination of the License,  you must immediately destroy all "
#~ "copies of the \n"
#~ "Software Products.\n"
#~ "\n"
#~ "\n"
#~ "2. The GPL License and Related Licenses\n"
#~ "\n"
#~ "The Software Products consist of components created by different persons or "
#~ "entities.  Most \n"
#~ "of these components are governed under the terms and conditions of the GNU "
#~ "General Public \n"
#~ "Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
#~ "licenses allow you to use, \n"
#~ "duplicate, adapt or redistribute the components which they cover. Please "
#~ "read carefully the terms \n"
#~ "and conditions of the license agreement for each component before using any "
#~ "component. Any question \n"
#~ "on a component license should be addressed to the component author and not "
#~ "to MandrakeSoft.\n"
#~ "The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
#~ "Documentation written \n"
#~ "by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
#~ "documentation for \n"
#~ "further details.\n"
#~ "Some versions of the Software Products may contain components which are not "
#~ "governed by the GPL \n"
#~ "License or similar agreements. Each such component is then governed by the "
#~ "terms and conditions \n"
#~ "of its own specific license. Please read carefully and comply with such "
#~ "specific licenses before \n"
#~ "you install, use or redistribute the said components. Such licenses will in "
#~ "general prevent the \n"
#~ "transfer,  duplication (except for backup purposes), redistribution, reverse "
#~ "engineering, \n"
#~ "de-assembly, \n"
#~ "de-compilation or modification of the component. Any breach of agreement "
#~ "will immediately terminate \n"
#~ "your rights under the specific license. Unless the specific license terms "
#~ "grant you such rights, \n"
#~ "you usually cannot install the programs on more than one system, or adapt it "
#~ "to be used on a \n"
#~ "network. \n"
#~ "In doubt, please contact directly the distributor or editor of the "
#~ "component. Transfer to third \n"
#~ "parties or copying of such components including the documentation is usually "
#~ "forbidden.\n"
#~ "\n"
#~ "\n"
#~ "3. Intellectual Property Rights\n"
#~ "\n"
#~ "All rights to the components of the Software Products belong to their "
#~ "respective authors and are \n"
#~ "protected by intellectual property and copyright laws applicable to software "
#~ "programs.\n"
#~ "MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
#~ "Products, as a whole or in \n"
#~ "parts,\n"
#~ "by all means and for all purposes.\n"
#~ "\"Mandrake\", \"Linux-Mandrake\" and associated logos are trademarks of "
#~ "MandrakeSoft S.A.  All rights \n"
#~ "are \n"
#~ "reserved. The duplication is forbidden without prior written consent by "
#~ "MandrakeSoft S.A.\n"
#~ "\n"
#~ "\n"
#~ "4. Limited Warranty\n"
#~ "\n"
#~ "The Software Products and attached documentation are provided \"as is\", "
#~ "with no warranty, to the \n"
#~ "extent permitted by law. Should the Software Products be defective, "
#~ "MandrakeSoft S.A. will at its \n"
#~ "own will either replace the Software Products, or reimburse the paid fee.\n"
#~ "This limited warranty is void if you fail to comply to the recommendations, "
#~ "instructions and \n"
#~ "conditions \n"
#~ "of use listed in the documentation or license agreements of the Software "
#~ "Products.\n"
#~ "To the extent permitted by law, MandrakeSoft S.A. will in no circumstances "
#~ "be liable for any \n"
#~ "special, \n"
#~ "incidental, direct or indirect damages whatsoever (including without "
#~ "limitation damages for loss of \n"
#~ "business, interruption of business, financial loss, legal fees and penalties "
#~ "resulting from a court \n"
#~ "judgement, or any other consequential loss) arising out of  the use or "
#~ "inability to use the \n"
#~ "Software \n"
#~ "Products, even if MandrakeSoft S.A. has been advised of the possibility or "
#~ "occurance of such \n"
#~ "damages.\n"
#~ "\n"
#~ "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
#~ "COUNTRIES\n"
#~ "\n"
#~ "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
#~ "in no circumstances, be \n"
#~ "liable for any special, incidental, direct or indirect damages whatsoever "
#~ "(including without \n"
#~ "limitation \n"
#~ "damages for loss of business, interruption of business, financial loss, "
#~ "legal fees and penalties \n"
#~ "resulting from a court judgement, or any other consequential loss) arising "
#~ "out of the possession \n"
#~ "and \n"
#~ "use of software components or arising out of  downloading software "
#~ "components from one of \n"
#~ "Linux-Mandrake \n"
#~ "sites  which are prohibited or restricted in some countries by local laws. "
#~ "This limited liability \n"
#~ "applies to, but is not restricted to, the strong cryptography components "
#~ "included in the Software \n"
#~ "Products.\n"
#~ "\n"
#~ "\n"
#~ "5. Governing Laws \n"
#~ "\n"
#~ "If any portion of this agreement is held void, illegal or inapplicable by a "
#~ "court judgement, this \n"
#~ "portion is excluded from this contract. You remain bound by the other "
#~ "applicable sections of the \n"
#~ "agreement.\n"
#~ "The terms and conditions of this License are governed by the Laws of "
#~ "France.\n"
#~ "All disputes on the terms of this license will preferably be settled out of "
#~ "court. As a last \n"
#~ "resort, \n"
#~ "the dispute will be referred to the appropriate Courts of Law of Paris - "
#~ "France.\n"
#~ "For any question on this document, please contact MandrakeSoft S.A.,  \n"
#~ "43, rue d'Aboukir, 75002 Paris - France\n"
#~ msgstr ""
#~ " Introduction\n"
#~ "\n"
#~ "The operating system and the different components available in the "
#~ "Linux-Mandrake distribution \n"
#~ "shall be called the \"Software Products\" hereafter. The Software Products "
#~ "include, but are not \n"
#~ "restricted to, the set of programs, methods, rules and documentation related "
#~ "to the operating \n"
#~ "system and the different components of the Linux-Mandrake distribution.\n"
#~ "\n"
#~ "\n"
#~ "1. License Agreement\n"
#~ "\n"
#~ "Please read carefully this document. This document is a license agreement "
#~ "between you and  \n"
#~ "MandrakeSoft S.A., 43, rue d'Aboukir, 75002 Paris - France, which applies to "
#~ "the Software Products.\n"
#~ "By installing, duplicating or using the Software Products in any manner, you "
#~ "explicitly \n"
#~ "accept and fully agree to conform to the terms and conditions of this "
#~ "License. \n"
#~ "If you disagree with any portion of the License, you are not allowed to "
#~ "install, duplicate or use \n"
#~ "the Software Products. \n"
#~ "Any attempt to install, duplicate or use the Software Products in a manner "
#~ "which does not comply \n"
#~ "with the terms and conditions of this License is void and will terminate "
#~ "your rights under this \n"
#~ "License. Upon termination of the License,  you must immediately destroy all "
#~ "copies of the \n"
#~ "Software Products.\n"
#~ "\n"
#~ "\n"
#~ "2. The GPL License and Related Licenses\n"
#~ "\n"
#~ "The Software Products consist of components created by different persons or "
#~ "entities.  Most \n"
#~ "of these components are governed under the terms and conditions of the GNU "
#~ "General Public \n"
#~ "Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
#~ "licenses allow you to use, \n"
#~ "duplicate, adapt or redistribute the components which they cover. Please "
#~ "read carefully the terms \n"
#~ "and conditions of the license agreement for each component before using any "
#~ "component. Any question \n"
#~ "on a component license should be addressed to the component author and not "
#~ "to MandrakeSoft.\n"
#~ "The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
#~ "Documentation written \n"
#~ "by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
#~ "documentation for \n"
#~ "further details.\n"
#~ "Some versions of the Software Products may contain components which are not "
#~ "governed by the GPL \n"
#~ "License or similar agreements. Each such component is then governed by the "
#~ "terms and conditions \n"
#~ "of its own specific license. Please read carefully and comply with such "
#~ "specific licenses before \n"
#~ "you install, use or redistribute the said components. Such licenses will in "
#~ "general prevent the \n"
#~ "transfer,  duplication (except for backup purposes), redistribution, reverse "
#~ "engineering, \n"
#~ "de-assembly, \n"
#~ "de-compilation or modification of the component. Any breach of agreement "
#~ "will immediately terminate \n"
#~ "your rights under the specific license. Unless the specific license terms "
#~ "grant you such rights, \n"
#~ "you usually cannot install the programs on more than one system, or adapt it "
#~ "to be used on a \n"
#~ "network. \n"
#~ "In doubt, please contact directly the distributor or editor of the "
#~ "component. Transfer to third \n"
#~ "parties or copying of such components including the documentation is usually "
#~ "forbidden.\n"
#~ "\n"
#~ "\n"
#~ "3. Intellectual Property Rights\n"
#~ "\n"
#~ "All rights to the components of the Software Products belong to their "
#~ "respective authors and are \n"
#~ "protected by intellectual property and copyright laws applicable to software "
#~ "programs.\n"
#~ "MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
#~ "Products, as a whole or in \n"
#~ "parts,\n"
#~ "by all means and for all purposes.\n"
#~ "\"Mandrake\", \"Linux-Mandrake\" and associated logos are trademarks of "
#~ "MandrakeSoft S.A.  All rights \n"
#~ "are \n"
#~ "reserved. The duplication is forbidden without prior written consent by "
#~ "MandrakeSoft S.A.\n"
#~ "\n"
#~ "\n"
#~ "4. Limited Warranty\n"
#~ "\n"
#~ "The Software Products and attached documentation are provided \"as is\", "
#~ "with no warranty, to the \n"
#~ "extent permitted by law. Should the Software Products be defective, "
#~ "MandrakeSoft S.A. will at its \n"
#~ "own will either replace the Software Products, or reimburse the paid fee.\n"
#~ "This limited warranty is void if you fail to comply to the recommendations, "
#~ "instructions and \n"
#~ "conditions \n"
#~ "of use listed in the documentation or license agreements of the Software "
#~ "Products.\n"
#~ "To the extent permitted by law, MandrakeSoft S.A. will in no circumstances "
#~ "be liable for any \n"
#~ "special, \n"
#~ "incidental, direct or indirect damages whatsoever (including without "
#~ "limitation damages for loss of \n"
#~ "business, interruption of business, financial loss, legal fees and penalties "
#~ "resulting from a court \n"
#~ "judgement, or any other consequential loss) arising out of  the use or "
#~ "inability to use the \n"
#~ "Software \n"
#~ "Products, even if MandrakeSoft S.A. has been advised of the possibility or "
#~ "occurance of such \n"
#~ "damages.\n"
#~ "\n"
#~ "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
#~ "COUNTRIES\n"
#~ "\n"
#~ "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
#~ "in no circumstances, be \n"
#~ "liable for any special, incidental, direct or indirect damages whatsoever "
#~ "(including without \n"
#~ "limitation \n"
#~ "damages for loss of business, interruption of business, financial loss, "
#~ "legal fees and penalties \n"
#~ "resulting from a court judgement, or any other consequential loss) arising "
#~ "out of the possession \n"
#~ "and \n"
#~ "use of software components or arising out of  downloading software "
#~ "components from one of \n"
#~ "Linux-Mandrake \n"
#~ "sites  which are prohibited or restricted in some countries by local laws. "
#~ "This limited liability \n"
#~ "applies to, but is not restricted to, the strong cryptography components "
#~ "included in the Software \n"
#~ "Products.\n"
#~ "\n"
#~ "\n"
#~ "5. Governing Laws \n"
#~ "\n"
#~ "If any portion of this agreement is held void, illegal or inapplicable by a "
#~ "court judgement, this \n"
#~ "portion is excluded from this contract. You remain bound by the other "
#~ "applicable sections of the \n"
#~ "agreement.\n"
#~ "The terms and conditions of this License are governed by the Laws of "
#~ "France.\n"
#~ "All disputes on the terms of this license will preferably be settled out of "
#~ "court. As a last \n"
#~ "resort, \n"
#~ "the dispute will be referred to the appropriate Courts of Law of Paris - "
#~ "France.\n"
#~ "For any question on this document, please contact MandrakeSoft S.A.,  \n"
#~ "43, rue d'Aboukir, 75002 Paris - France\n"

#~ msgid ""
#~ "Your computer can be configured to share its Internet connection.\n"
#~ "\n"
#~ msgstr ""
#~ "コンピュータはインターネット接続を共有するように設定できます。\n"
#~ "\n"

#~ msgid "Everything has been configured.\n"
#~ msgstr "設定が全部終わりました。\n"

#~ msgid "Connect to Internet with a normal modem"
#~ msgstr "普通のモデムでインターネットに接続"

#~ msgid "Connect to Internet using ISDN"
#~ msgstr "ISDNを使ってインターネットに接続"

#~ msgid "Connect to Internet using DSL (or ADSL)"
#~ msgstr "DSL(またはADSL)を使ってインターネットに接続"

#~ msgid "Connect to Internet using Cable"
#~ msgstr "ケーブルを使ってインターネットに接続"

#~ msgid ""
#~ "Time (secs) of inactivity after which\n"
#~ "it hangs up. (leave blank to disable it)"
#~ msgstr ""
#~ "一定時間（秒）活動がないと、自動的に電話を切ります。\n"
#~ "秒数を指定しましょう (自動切断したくなければ空白のまま）"

#~ msgid "Germany"
#~ msgstr "ドイツ"

#~ msgid "Germany (1TR6)"
#~ msgstr "ドイツ (1TR6)"

#~ msgid "What do you wish to do?"
#~ msgstr "どうしますか？"

#~ msgid "Install/Rescue"
#~ msgstr "インストール／レスキュー"

#~ msgid "Rescue"
#~ msgstr "レスキュー"

#~ msgid "Which partition type do you want?"
#~ msgstr "どのパーティションタイプにしますか？"

#~ msgid ""
#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
#~ "installed, or if you wish to use multiple distributions or versions.\n"
#~ "\n"
#~ "Choose \"Rescue\" if you wish to rescue a version of Linux-Mandrake already "
#~ "installed.\n"
#~ "\n"
#~ "\n"
#~ "Select:\n"
#~ "\n"
#~ "  - Recommended: If you have never installed GNU/Linux before, choose this.\n"
#~ "\n"
#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
#~ "choose\n"
#~ "    the primary usage for your machine. See below for details.\n"
#~ "\n"
#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
#~ "    perform a highly customized installation. As for a \"Customized\"\n"
#~ "    installation class, you will be able to select the usage for your "
#~ "system.\n"
#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
#~ "DOING!\n"
#~ msgstr ""
#~ "GNU/Linuxのインストールが初めてか、複数のディストリビューションや\n"
#~ "バージョンと共存させたいときには、「インストール」を選びましょう。\n"
#~ "\n"
#~ "すでにインストールずみのMandrake Linuxを救済したいなら、「レスキュー」を\n"
#~ "選びましょう。\n"
#~ "\n"
#~ "\n"
#~ "選択の目安:\n"
#~ "\n"
#~ "  - 全自動(推奨): GNU/Linuxのインストールが初めてなら、これを選びましょう。\n"
#~ "\n"
#~ "  - カスタマイズ: GNU/Linux に詳しければ、自分のマシンの主な使い方に\n"
#~ "    あわせて選びましょう。詳しくは以下を参照してください。\n"
#~ "\n"
#~ "  - エキスパート: これは本当にGNU/Linuxに詳しい人が、非常に特殊な\n"
#~ "    インストールをしたい場合に選びます。「カスタマイズ」\n"
#~ "    のインストールと同じく、自分のシステムの使い方を選べます。\n"
#~ "    でも、完全に自信がないなら、「絶対に」これは使わないでください！\n"

#~ msgid ""
#~ "At this point, you may choose what partition(s) to use to install\n"
#~ "your Linux-Mandrake system if they have been already defined (from a\n"
#~ "previous install of GNU/Linux or from another partitioning tool). In other\n"
#~ "cases, hard drive partitions must be defined. This operation consists of\n"
#~ "logically dividing the computer's hard drive capacity into separate\n"
#~ "areas for use.\n"
#~ "\n"
#~ "\n"
#~ "If you have to create new partitions, use \"Auto allocate\" to "
#~ "automatically\n"
#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
#~ "by\n"
#~ "clicking on \"hda\" for the first IDE drive,\n"
#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
#~ "\n"
#~ "\n"
#~ "Two common partition are: the root partition (/), which is the starting\n"
#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
#~ "all files necessary to start the operating system when the\n"
#~ "computer is first turned on.\n"
#~ "\n"
#~ "\n"
#~ "Because the effects of this process are usually irreversible, partitioning\n"
#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
#~ "simplifies the process so that it must not be. Consult the documentation\n"
#~ "and take your time before proceeding.\n"
#~ "\n"
#~ "\n"
#~ "You can reach any option using the keyboard: navigate through the "
#~ "partitions\n"
#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
#~ "\n"
#~ "- Ctrl-c  to create a new partition (when an empty partition is selected)\n"
#~ "\n"
#~ "- Ctrl-d  to delete a partition\n"
#~ "\n"
#~ "- Ctrl-m  to set the mount point\n"
#~ msgstr ""
#~ "GNU/Linux用のパーティションの準備ができていれば（前に GNU/Linux \n"
#~ "をインストールしたり、\n"
#~ "別のユーティリティでパーティションを作った場合）、どのパーティションに\n"
#~ "Linux-Mandrakeシステムをインストールするかを選びましょう。\n"
#~ "もしパーティションを作っていなければ、ハードディスクのパーティションを\n"
#~ "ここで作ります。パーティションというのは、コンピュータのハードディスク\n"
#~ "を目的にあわせて論理的に区切ることです。\n"
#~ "\n"
#~ "\n"
#~ "新しくパーティションをつくるなら、「自動割り当て」を選べば、自動的に\n"
#~ "Linux用のパーティションができあがります。パーティションをつくるハード\n"
#~ "ディスクを選ぶときは、最初のIDEドライブが「hda」、2番目が「hdb」、最初\n"
#~ "のSCSIドライブが「sda」、という具合になります。\n"
#~ "\n"
#~ "\n"
#~ "よくあるパーティションの切り方としては、rootパーティション(/) と\n"
#~ "bootパーティション(/boot) を作ります。rootはファイルシステムの\n"
#~ "ディレクトリのてっぺんで、/bootにはコンピュータのスイッチを入れた\n"
#~ "ときに起動に必要なファイルが置いてあるところです。\n"
#~ "\n"
#~ "\n"
#~ "パーティションを切ると、ふつうはそこのデータは全部消えて、もとに\n"
#~ "戻りません。だからパーティションを切るのは、初心者にはおっかない\n"
#~ "ですし、とっても気疲れするものです。そうならないように、DiskDrake\n"
#~ "はこのプロセスをなるべく簡単にします。まずはドキュメンテーションを\n"
#~ "読んで、先に進む前にじっくり気を落ち着けましょう。\n"
#~ "\n"
#~ "\n"
#~ "どのオプションも、キーボードで選べます。パーティションを選ぶには、\n"
#~ "タブと上下のカーソルキーを使いましょう。パーティションを選んだら、\n"
#~ "次のキーが使えます：\n"
#~ "\n"
#~ "- Ctrl-c  新しいパーティションを作る（空のパーティションを選んだ場合）\n"
#~ "\n"
#~ "- Ctrl-d  そのパーティションを削除\n"
#~ "\n"
#~ "- Ctrl-m  マウントポイントの設定\n"

#~ msgid ""
#~ "Any partitions that have been newly defined must be formatted for\n"
#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
#~ "wish to re-format some already existing partitions to erase the data\n"
#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
#~ "partitions, particularly if they contain files or data you wish to keep.\n"
#~ "Typically retained are /home and /usr/local."
#~ msgstr ""
#~ "新しく作ったパーティションはすべて、フォーマットしないと使えません\n"
#~ "（フォーマットというのはファイルシステムをつくることです）。さらに\n"
#~ "既存のパーティションをフォーマットして、そこのデータを消去もできます。\n"
#~ "注意：既存のパーティションは、フォーマットしなおす必要はありません。\n"
#~ "特に保存したいデータ（/home と /usr/localなど）があれば、フォーマット\n"
#~ "してはいけません。"

#~ msgid ""
#~ "The packages selected are now being installed. This operation\n"
#~ "should take a few minutes unless you have chosen to upgrade an\n"
#~ "existing system, in that case it can take more time even before\n"
#~ "upgrade starts."
#~ msgstr ""
#~ "選んだパッケージをインストールしています。これには数分かかりますよ。\n"
#~ "既存システムのアップグレードを選んだ場合は、事前に調べることが多いの\n"
#~ "で、もっとかかります。"

#~ msgid ""
#~ "If DrakX failed to find your mouse, or if you want to\n"
#~ "check what it has done, you will be presented the list of mice\n"
#~ "above.\n"
#~ "\n"
#~ "\n"
#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
#~ "Otherwise you may choose the mouse that more closely matches your own\n"
#~ "from the menu above.\n"
#~ "\n"
#~ "\n"
#~ "In case of a serial mouse, you will also have to tell DrakX\n"
#~ "which serial port it is connected to."
#~ msgstr ""
#~ "もし DrakX がマウスを見つけられなかったり、何が選ばれたかチェック\n"
#~ "したかったりするときは、上にマウスの一覧が出てくるはずです。\n"
#~ "\n"
#~ "\n"
#~ "DrakX のやった設定でよければ、'OK' をクリックしましょう。\n"
#~ "設定がちがっていたら、自分のマウスにいちばん\n"
#~ "近い種類のマウスをメニューから選んでください。\n"
#~ "\n"
#~ "\n"
#~ "シリアルマウスを使っているときには、それがつながっているシリアルポート\n"
#~ "も指定してください。"

#~ msgid ""
#~ "This section is dedicated to configuring a local area\n"
#~ "network (LAN) or a modem.\n"
#~ "\n"
#~ "Choose \"Local LAN\" and DrakX will\n"
#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
#~ "should be found and initialized automatically.\n"
#~ "However, if your peripheral is ISA, autodetection will not work,\n"
#~ "and you will have to choose a driver from the list that will appear then.\n"
#~ "\n"
#~ "\n"
#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
#~ "in the first time, otherwise you will have to specify the options\n"
#~ "to the driver that you will have fetched from documentation of your\n"
#~ "hardware.\n"
#~ "\n"
#~ "\n"
#~ "If you install a Linux-Mandrake system on a machine which is part\n"
#~ "of an already existing network, the network administrator will\n"
#~ "have given you all necessary information (IP address, network\n"
#~ "submask or netmask for short, and hostname). If you're setting\n"
#~ "up a private network at home for example, you should choose\n"
#~ "addresses.\n"
#~ "\n"
#~ "\n"
#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
#~ "a modem will be configured. DrakX will try to find your modem,\n"
#~ "if it fails you will have to select the right serial port where\n"
#~ "your modem is connected to."
#~ msgstr ""
#~ "ここでは、ローカルエリアネットワーク（LAN）かモデムの設定をします。\n"
#~ "\n"
#~ "「ローカル LAN」を選ぶと、DrakX はマシンのイーサネットアダプタを探し\n"
#~ "ます。PCIのアダプタは自動的に見つかって設定されるはずです。\n"
#~ "もしお使いのアダプタがISA なら、自動では検出できません。この場合、\n"
#~ "あとから一覧表が出てくるので、そこから選んでください。\n"
#~ "\n"
#~ "\n"
#~ "SCSIアダプタの場合、とりあえずドライバにアダプタを探させてみましょう。\n"
#~ "ダメなら、自分でドライバのオプションを指定します。指定オプションは、\n"
#~ "自分のハードウェアの付属文書で調べてください。\n"
#~ "\n"
#~ "\n"
#~ "このマシンがすでに既存のネットワークにつながっているなら、ネットワーク\n"
#~ "管理者に必要な情報を教わっているはずです(IP アドレス、ネットワークの\n"
#~ "サブマスク（通称ネットマスク）、ホスト名)。自宅などで自分だけのネット\n"
#~ "ワークを作ろうとしているなら、アドレスなどは自分で選びます。\n"
#~ "\n"
#~ "\n"
#~ "「モデムによるダイアルアップ」を選ぶと、モデムによるインターネット接続\n"
#~ "が設定されます。DrakX はモデムを探しますが、これが失敗したら、モデムの\n"
#~ "つながっているシリアルポートを自分で指定してください。"

#~ msgid ""
#~ "GNU/Linux can deal with many types of printer. Each of these\n"
#~ "types require a different setup. Note however that the print\n"
#~ "spooler uses 'lp' as the default printer name; so you\n"
#~ "must have one printer with such a name; but you can give\n"
#~ "several names, separated by '|' characters, to a printer.\n"
#~ "So, if you prefer to have a more meaningful name you just have\n"
#~ "to put it first, eg: \"My Printer|lp\".\n"
#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
#~ "\n"
#~ "\n"
#~ "If your printer is physically connected to your computer, select\n"
#~ "\"Local printer\". You will then have to tell which port your\n"
#~ "printer is connected to, and select the appropriate filter.\n"
#~ "\n"
#~ "\n"
#~ "If you want to access a printer located on a remote Unix machine,\n"
#~ "you will have to select \"Remote lpd\". In order to make\n"
#~ "it work, no username or password is required, but you will need\n"
#~ "to know the name of the printing queue on this server.\n"
#~ "\n"
#~ "\n"
#~ "If you want to access a SMB printer (which means, a printer located\n"
#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
#~ "plus the username, workgroup and password required in order to\n"
#~ "access the printer, and of course the name of the printer. The same goes\n"
#~ "for a NetWare printer, except that you need no workgroup information."
#~ msgstr ""
#~ "GNU/Linux ではいろんなプリンタが使えます。が、それぞれ設定がちがいます。\n"
#~ "ただし、印刷スプーラはデフォルトのプリンタ名として「lp」を使います。\n"
#~ "だから、lpという名前のプリンタが一つは必要です。でも、一つのプリンタ\n"
#~ "に複数の名前をつけることもできます。このときは「|」で区切ります。\n"
#~ "だから、プリンタにわかりやすい名前をつけたければ、それを先に書いて\n"
#~ "おけばすみます。たとえば「My Printer|lp」という具合に。\n"
#~ "名前の中に「lp」が含まれるプリンタがデフォルトになります。\n"
#~ "\n"
#~ "\n"
#~ "プリンタが直接コンピュータにつながっていれば、「ローカルプリンタ」を\n"
#~ "選びます。この場合、プリンタのつながっているポートを指定して、適切な\n"
#~ "フィルタを選びます。\n"
#~ "\n"
#~ "\n"
#~ "ネットワーク上のほかのUnixマシンにつながったプリンタを使うなら、\n"
#~ "「リモート lpd」を選びましょう。これを使うには、ユーザ名やパスワードは\n"
#~ "いりませんが、そのサーバ上の印刷キューの名前が要ります。\n"
#~ "\n"
#~ "\n"
#~ "SMBプリンタを使うなら（つまりネットワーク上のウィンドウズ9x/NTマシン\n"
#~ "につながったプリンタを使うという意味です）、そのマシンのSMB 名（これ\n"
#~ "はTCP/IP名とは別物です）と、場合によってはIPアドレスが必要になります。\n"
#~ "さらにユーザ名、ワークグループ名とパスワード、さらにはプリンタ名が\n"
#~ "ないとプリンタにアクセスできません。NetWare プリンタも、ワークグループは\n"
#~ "不要なだけで、ほとんど同じです。"

#~ msgid ""
#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
#~ "boot into GNU/Linux any more."
#~ msgstr ""
#~ "ここでは「はい」と答えるのを強く推奨します。後からMSウィンドウズを\n"
#~ "インストールしたら、ブートセクタは上書きされます。そうなったら、\n"
#~ "ブートディスクを作っておかないと、Linuxが立ち上げられなくなりますよ。"

#~ msgid "Move your wheel!"
#~ msgstr "ホイールをまわしてみましょう！"

#~ msgid "Forget the changes?"
#~ msgstr "変更を全部破棄しますか？"

#~ msgid "Cable connection"
#~ msgstr "ケーブル接続"

#~ msgid "Host name:"
#~ msgstr "ホスト名:"

#~ msgid "What is the type of your mouse?"
#~ msgstr "マウスの型はなんですか？"

#~ msgid "Automatic resolutions"
#~ msgstr "解像度の自動設定"

#~ msgid ""
#~ "To find the available resolutions I will try different ones.\n"
#~ "Your screen will blink...\n"
#~ "You can switch if off if you want, you'll hear a beep when it's over"
#~ msgstr ""
#~ "有効な解像度を得るために別の方法を試してみます。\n"
#~ "スクリーンが明滅します...\n"
#~ "いやならモニタのスイッチを切ってもだいじょうぶ。終わったら beep 音\n"
#~ "で知らせます。"

#~ msgid ""
#~ "I can try to find the available resolutions (eg: 800x600).\n"
#~ "Sometimes, though, it may hang the machine.\n"
#~ "Do you want to try?"
#~ msgstr ""
#~ "有効な解像度(例: 800x600)を自動的に探せます。\n"
#~ "が、これでマシンが止まってしまうかもしれません。\n"
#~ "探してみましょうか？"

#~ msgid ""
#~ "No valid modes found\n"
#~ "Try with another video card or monitor"
#~ msgstr ""
#~ "有効なモードが見付かりません\n"
#~ "他のビデオカード/モニタで試して下さい。"

#~ msgid "Automatical resolutions search"
#~ msgstr "解像度の自動検索"

#~ msgid "dhcpd"
#~ msgstr "dhcpd"

#~ msgid "pump"
#~ msgstr "pump"

#~ msgid "dhcpxd"
#~ msgstr "dhcpxd"

#~ msgid "dhcp-client"
#~ msgstr "dhcp-client"

#~ msgid "Apple ADB Mouse"
#~ msgstr "Apple ADB マウス"

#~ msgid "Apple ADB Mouse (2 Buttons)"
#~ msgstr "Apple ADB マウス（2ボタン）"

#~ msgid "Apple ADB Mouse (3+ Buttons)"
#~ msgstr "Apple ADB マウス（3ボタン以上）"

#~ msgid "Apple USB Mouse"
#~ msgstr "Apple USBマウス"

#~ msgid "Apple USB Mouse (2 Buttons)"
#~ msgstr "Apple USBマウス（2ボタン）"

#~ msgid "Apple USB Mouse (3+ Buttons)"
#~ msgstr "Apple USBマウス（3ボタン以上）"

#~ msgid "ASCII MieMouse"
#~ msgstr "ASCII MieMouse"

#~ msgid "Genius NetMouse Pro"
#~ msgstr "Genius NetMouse Pro"

#~ msgid "ATI Bus Mouse"
#~ msgstr "ATI バスマウス"

#~ msgid "Microsoft Bus Mouse"
#~ msgstr "マイクロソフト・バスマウス"

#~ msgid "Logitech Bus Mouse"
#~ msgstr "ロジテック・バスマウス"

#~ msgid "USB Mouse"
#~ msgstr "USBマウス"

#~ msgid "USB Mouse (3 buttons or more)"
#~ msgstr "USBマウス（3ボタン以上）"

#~ msgid "Microsoft Rev 2.1A or higher (serial)"
#~ msgstr "Microsoft Rev 2.1A 以上(serial)"

#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
#~ msgstr "Logitech MouseMan+/FirstMouse+ (シリアル)"

#~ msgid "ASCII MieMouse (serial)"
#~ msgstr "ASCII MieMouse (シリアル)"

#~ msgid "Genius NetMouse (serial)"
#~ msgstr "Genius NetMouse (シリアル)"

#~ msgid "Generic Mouse (serial)"
#~ msgstr "汎用マウス (シリアル)"

#~ msgid "Microsoft compatible (serial)"
#~ msgstr "マイクロソフト互換（シリアル）"

#~ msgid "Generic 3 Button Mouse (serial)"
#~ msgstr "汎用の3ボタンマウス (シリアル)"

#~ msgid "Kensington Thinking Mouse (serial)"
#~ msgstr "Kensington Thinking Mouse (シリアル)"

#~ msgid ""
#~ "I need to configure your network adapter to be able to connect to internet."
#~ msgstr ""
#~ "インターネット接続には、ネットワークアダプタを設定する必要があります。"

#~ msgid ""
#~ "Please choose which network adapter do you want to use to connect to "
#~ "internet.\n"
#~ "If you don't know, choose eth0.\n"
#~ msgstr ""
#~ "インターネットにつなぐためのネットワークアダプタを選んでください。\n"
#~ "わからなければ、eth0 を選んでおきましょう。\n"

#~ msgid "nfs mount failed"
#~ msgstr "nfs マウントに失敗"

#~ msgid "CHAP"
#~ msgstr "CHAP"

#~ msgid ""
#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
#~ "By default, the 4.0 server is used unless your card is not supported.\n"
#~ "\n"
#~ "Do you want to keep XFree 3.3?"
#~ msgstr ""
#~ "DrakX は、XFree 3.3とXFree 4.0両方の設定ファイルをつくります。でも\n"
#~ "デフォルトでは対応ビデオカードが無い限り、4.0サーバのほうを使います。\n"
#~ "\n"
#~ "XFree 3.3 のままにしておきますか?"

#~ msgid "Cryptographic"
#~ msgstr "暗号化"

#~ msgid "Configure LAN"
#~ msgstr "LAN の設定"

#~ msgid "End configuration"
#~ msgstr "設定を終える"

#~ msgid "Do not set up networking"
#~ msgstr "ネットワーク設定をしない"

#~ msgid "Do you want to configure a local network for your system?"
#~ msgstr "システムのローカル LAN ネットワークを設定しますか？"

#~ msgid "Show less"
#~ msgstr "概略で表示"

#~ msgid "Show more"
#~ msgstr "詳細を表示"

#~ msgid "Take over the hard drive"
#~ msgstr "ハードドライブを引き継ぐ"

#~ msgid "URI for Local printer"
#~ msgstr "ローカルプリンタのURI"

#~ msgid "URI for Network printer"
#~ msgstr "ネットワークプリンタのURI"

#~ msgid "Local Printer Device (URI)"
#~ msgstr "ローカルプリンタデバイス (URI)"

#~ msgid ""
#~ "What URI device is your printer connected to\n"
#~ "(note that parallel:/dev/lp0 is equivalent to LPT1:)?"
#~ msgstr ""
#~ "プリンタがつながっているデバイスは何ですか\n"
#~ "(注意 パラレルの/dev/lp0 は LPT1: になります)？\n"

#~ msgid "Network Printer Options (URI)"
#~ msgstr "Netware プリンタのオプション (URI)"

#~ msgid "curly"
#~ msgstr "カール"

#~ msgid "default"
#~ msgstr "デフォルト"

#~ msgid "tie"
#~ msgstr "ネクタイ"

#~ msgid "brunette"
#~ msgstr "ブルネット"

#~ msgid "girl"
#~ msgstr "女の子"

#~ msgid "woman-blond"
#~ msgstr "ブロンド女性"

#~ msgid "automagic"
#~ msgstr "オートマジック"

#~ msgid "Normal"
#~ msgstr "ノーマル"

#~ msgid "Have you been provided with a hostname?"
#~ msgstr "ホストネームを提供されていますか？"

#~ msgid "Local Area Network specification"
#~ msgstr "ローカルエリアネットワークの詳細"

#~ msgid "You may now decide which class C network to use.\n"
#~ msgstr "どのクラスCネットワークを使うか決めてください。\n"

#~ msgid "Network:"
#~ msgstr "ネットワーク:"

#~ msgid "Internet Connection Sharing - setup of $device"
#~ msgstr "インターネット共有接続 - $device の設定"

#~ msgid ""
#~ "The following interface is about to be configured:\n"
#~ "\n"
#~ "$interface\n"
#~ "\n"
#~ msgstr ""
#~ "次のインターフェースを設定しようとしてます：\n"
#~ "\n"
#~ "$interface\n"
#~ "\n"

#~ msgid "Everything configured!"
#~ msgstr "全てを設定しました！"

#~ msgid "What is your keyboard layout?"
#~ msgstr "キーボードレイアウトは何ですか？"

#~ msgid "Configure my card"
#~ msgstr "カードの設定"

#~ msgid "pptp alcatel"
#~ msgstr "pptp alcatel"

#~ msgid "Try to find PCMCIA cards?"
#~ msgstr "PCMCIAカードをさがしてみましょうか？"

#~ msgid "Try to find %s devices?"
#~ msgstr "%sデバイスをさがしてみますか？"

#~ msgid "Small(%dMB)"
#~ msgstr "最小(%dMB)"

#~ msgid "Modem Configuration"
#~ msgstr "モデムの設定"

#~ msgid ""
#~ "Do you want to configure a dialup connection with modem for your system?"
#~ msgstr "システムのモデムによるダイアルアップネットワークを設定しますか？"

#~ msgid "Do you want to configure a ISDN connection for your system?"
#~ msgstr "システムのISDN接続を設定しますか？"

#~ msgid "Try to find PCI devices?"
#~ msgstr "PCIデバイスをさがしてみますか？"

#~ msgid "Searching root partition."
#~ msgstr "ルートパーティションを検索"

#~ msgid "%s: This is not a root partition, please select another one."
#~ msgstr "%s: これはルートパーティションではありません，ほかを選んで下さい。"

#~ msgid "No root partition found"
#~ msgstr "ルートパーティションが見つかりません"

#~ msgid "Can't use broadcast with no NIS domain"
#~ msgstr "NIS ドメインがないのでブロードキャストが使えません"

#~ msgid "Please choose a partition to use as your root partition."
#~ msgstr "どのパーティションをルートパーティションにしますか"

#~ msgid "Autologin at startup"
#~ msgstr "起動時の自動ログイン"

#~ msgid "Autologin - Choose default user"
#~ msgstr "自動ログイン - デフォルトユーザを選択"

#~ msgid "You don't have any windows partitions!"
#~ msgstr "ウィンドウズのパーティションがありません！"

#~ msgid "You don't have any enough room for Lnx4win"
#~ msgstr "Linux4Winが入るだけの空きがありません！"

#~ msgid ", %U MB"
#~ msgstr ", %U MB"

#~ msgid "Automated"
#~ msgstr "全自動"

# NOTE: this message will be displayed by lilo at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is then suggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
# When possible cp437 accentuated letters can be used too.
#
#~ msgid ""
#~ "Welcome to LILO the operating system chooser!\n"
#~ "\n"
#~ "To list the possible choices, press <TAB>.\n"
#~ "\n"
#~ "To load one of them, write its name and press <ENTER> or wait %d seconds for "
#~ "default boot.\n"
#~ "\n"
#~ msgstr ""
#~ "LILO operating system chooser-he youkosou!\n"
#~ "\n"
#~ "<TAB>: Ichiran Hyouji\n"
#~ "\n"
#~ "Ichiran kara erande <ENTER> wo oshimasu. %d byou de Default ni narimasu.\n"
#~ "\n"

#~ msgid "SILO main options"
#~ msgstr "SILO メインオプション"

#~ msgid ""
#~ "Here are the following entries in SILO.\n"
#~ "You can add some more or change the existing ones."
#~ msgstr ""
#~ "SILO には以下のエントリがあります。\n"
#~ "ほかのエントリを加えるか変更することができます。"

#~ msgid "This label is already in use"
#~ msgstr "このラベルはすでに使われています"

#~ msgid "Installation of SILO failed. The following error occured:"
#~ msgstr "SILO のインストールに失敗しました。以下のエラーが発生:"

#~ msgid ""
#~ "DrakX will attempt at first to look for one or more PCI\n"
#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
#~ "to use, it will insert it (them)  automatically.\n"
#~ "\n"
#~ "\n"
#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
#~ "doesn't know which driver to use for this card, or if you have no\n"
#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
#~ "will have to select one.\n"
#~ "\n"
#~ "\n"
#~ "After you have selected the driver, DrakX will ask if you\n"
#~ "want to specify options for it. First, try and let the driver\n"
#~ "probe for the hardware: it usually works fine.\n"
#~ "\n"
#~ "\n"
#~ "If not, do not forget the information on your hardware that you\n"
#~ "could get from your documentation or from Windows (if you have it\n"
#~ "on your system), as suggested by the installation guide. These\n"
#~ "are the options you will need to provide to the driver."
#~ msgstr ""
#~ "DrakX はまず、PCIバスのSCSIアダプタを探しにいきます。アダプタがみつ\n"
#~ "かって、使うドライバがわかれば、それを自動的に組み込みます。アダプタ\n"
#~ "がたくさんあっても大丈夫です。\n"
#~ "\n"
#~ "\n"
#~ "もしISAバスのSCSIアダプタを使っていたり、PCIバスのSCSIアダプタでも\n"
#~ "DrakXにドライバがわからなかったりするとき、またはSCSIアダプタがない\n"
#~ "ときには、プロンプトが出てきて、SCSIアダプタがあるかどうかききます。\n"
#~ "なければ「いいえ」と答えてください。あれば「はい」と答えましょう。\n"
#~ "するとドライバの一覧表が出てくるので、適切なものを選んでください。\n"
#~ "\n"
#~ "\n"
#~ "ドライバを選んだら、そのドライバでオプションを指定したいかどうかを\n"
#~ "DrakXがきいてきます。最初は、ドライバにハードウェアをプローブさせて\n"
#~ "みましょう。たいがいはこれでうまくいきます。\n"
#~ "\n"
#~ "\n"
#~ "これがダメなら、そのアダプタについてドキュメンテーションに書いてあった\n"
#~ "ことや、ウィンドウズのプロパティの情報などを思いだしてみましょう。イン\n"
#~ "ストールガイドでも、これを控えておくようにお奨めしましたよね。その情報\n"
#~ "をドライバにわたしてやることになります。"

#~ msgid "Shutting down"
#~ msgstr "シャットダウン中"

#~ msgid "useless"
#~ msgstr "無用"

#~ msgid "garbage"
#~ msgstr "ゴミ"

#~ msgid ""
#~ "Some true type fonts from windows have been found on your computer.\n"
#~ "Do you want to use them? Be sure you have the right to use them under Linux."
#~ msgstr ""
#~ "コンピュータ上にウィンドウズからの True Type フォントを見付けました。\n"
#~ "これらを使いますか? あなたが Linux "
#~ "上でこれらを使う権利があるかを確かめて下さい。"

#~ msgid ""
#~ "Choose \"Install\" if there are no previous versions of Linux\n"
#~ "installed, or if you wish to use multiple distributions or versions.\n"
#~ "\n"
#~ "\n"
#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
#~ "Linux:\n"
#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
#~ "2000\n"
#~ "or 7.0 (Air)."
#~ msgstr ""
#~ "Linuxのインストールが初めてか、ほかのLinuxディストリビューションや\n"
#~ "バージョンと共存させたいときには、「インストール」を選びましょう。\n"
#~ "\n"
#~ "\n"
#~ "Mandrake Linux: 5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus),\n"
#~ "6.1 (Helios), Gold 2000, 7.0 (Air)など、古いMandrake Linuxを\n"
#~ "アップグレードするなら「アップグレード」を選びましょう。"

#~ msgid "Do you want to use LILO?"
#~ msgstr "LILO を使いますか？"

#~ msgid ""
#~ "You may now select the packages you wish to install.\n"
#~ "\n"
#~ "\n"
#~ "First you can select group of package to install or upgrade. After that\n"
#~ "you can select more packages according to the total size you wish to\n"
#~ "select.\n"
#~ "\n"
#~ "\n"
#~ "If you are in expert mode, you can select packages individually.\n"
#~ "Please note that some packages require the installation of others.\n"
#~ "These are referred to as package dependencies. The packages you select,\n"
#~ "and the packages they require will be automatically selected for\n"
#~ "install. It is impossible to install a package without installing all\n"
#~ "of its dependencies."
#~ msgstr ""
#~ "ではインストールするパッケージの選択に移りましょう。\n"
#~ "\n"
#~ "\n"
#~ "まずは、インストールやアップグレードしたいパッケージをおおざっぱに\n"
#~ "グループで選びます。その後で、パッケージのサイズなどからもっと細かい\n"
#~ "選択ができます。\n"
#~ "\n"
#~ "\n"
#~ "エキスパート・モードなら、個別のパッケージを選べます。\n"
#~ "パッケージの中には、他のパッケージがないと使えないものがあります。\n"
#~ "これをパッケージの依存関係といいます。ここではパッケージを選ぶと、\n"
#~ "それに必要なパッケージも自動的に選ばれてインストールされます。\n"
#~ "依存関係が完全に解決されないと、パッケージはインストールできません。"

#~ msgid ""
#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
#~ "Normally they are correctly detected during installation. If you don't\n"
#~ "see yours detected, you can add one or more now.\n"
#~ "\n"
#~ "\n"
#~ "If you don't want that everybody could access at one of them, you can "
#~ "remove\n"
#~ "it now (a boot disk will be needed to boot it)."
#~ msgstr ""
#~ "LILO (LInux LOader) は、Linuxやその他のOSをブートできます。\n"
#~ "ディスク上の各種のOSは、普通はインストールの中できちんと検出されています。\n"
#~ "でも検出されていないようなら、ここで追加できます。\n"
#~ "\n"
#~ "\n"
#~ "みんなにアクセスしてほしくないOSがあったら、ここからは削除しておきます。\n"
#~ "（そのOSを立ち上げるにはブートディスクが必要になります）"

#~ msgid ""
#~ "Now that you've selected desired groups, please choose \n"
#~ "how many packages you want, ranging from minimal to full \n"
#~ "installation of each selected groups."
#~ msgstr ""
#~ "今、欲しいグループの選択をしてるところです。\n"
#~ "選択したそれぞれのグループで最小～最大インストレーションの範囲で\n"
#~ "どのくらいのパッケージが必要か選んで下さい。"

#~ msgid "Choose other CD to install"
#~ msgstr "インストールしたい他の CD を選択"

#~ msgid ""
#~ "Select:\n"
#~ "\n"
#~ "  - Recommended: If you have never installed Linux before.\n"
#~ "\n"
#~ "\n"
#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
#~ "select the usage for the installed system between normal, development or\n"
#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
#~ "computer. You may choose \"Development\" if you will be using the computer\n"
#~ "primarily for software development, or choose \"Server\" if you wish to\n"
#~ "install a general purpose server (for mail, printing...).\n"
#~ "\n"
#~ "\n"
#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
#~ "a highly customized installation, this Install Class is for you. You will\n"
#~ "be able to select the usage of your installed system as for \"Customized\"."
#~ msgstr ""
#~ "こんな方針を目安に選んでください:\n"
#~ "\n"
#~ "  - 推奨: Linuxのインストールが初めてならこれ。\n"
#~ "\n"
#~ "\n"
#~ "  - カスタム選択: Linuxに詳しければ、システムの使い方に応じて「ノーマル」\n"
#~ "「開発用」「サーバ」の中から選びましょう。ふつうのシステムにしたければ、\n"
#~ "「ノーマル」がいいでしょう。主にソフト開発をするつもりなら、「開発用」を\n"
#~ "選びます。あるいは、汎用サーバ（メール用、印刷用などなど）として使うなら\n"
#~ "「サーバ」がおすすめです。\n"
#~ "\n"
#~ "\n"
#~ "  - エキスパート：Expert: GNU/Linux バリバリで、細かいカスタマイズをした\n"
#~ "ければ、このインストールを選んでください。このとき、システムの使途は\n"
#~ "「カスタマイズ」になります。"

#~ msgid "Help"
#~ msgstr "ヘルプ"

#~ msgid "Downloading cryptographic packages"
#~ msgstr "暗号関連のパッケージをダウンロード中"

#~ msgid "Setup SCSI"
#~ msgstr "SCSI の設定"

#~ msgid "Installation CD Nr %s"
#~ msgstr "インストレーション CD Nr %s"

#~ msgid "Which language do you want?"
#~ msgstr "どの言語を使いますか？"

#~ msgid "Which packages do you want to install"
#~ msgstr "どのパッケージをインストールしますか"

#~ msgid "What usage do you want?"
#~ msgstr "どの使用法を選びますか？"

#~ msgid "Choose install or upgrade"
#~ msgstr "導入/拡張の選択"

#~ msgid "A entry %s already exists"
#~ msgstr "エントリ %s はすでに存在します"

#~ msgid ""
#~ "Enter a floppy to create an HTP enabled boot\n"
#~ "(all data on floppy will be lost)"
#~ msgstr ""
#~ "HTP の使えるブートディスク用のフロッピーをドライブに挿入してください\n"
#~ "フロッピー上の全てのデータは失われます"

#~ msgid "It is necessary to restart installation booting on the floppy"
#~ msgstr "フロッピーで起動してインストールをやりなおしてください"

#~ msgid "It is necessary to restart installation with the new parameters"
#~ msgstr "パラメータを変えてインストールをやりなおしてください。"

#~ msgid ""
#~ "Failed to create an HTP boot floppy.\n"
#~ "You may have to restart installation and give ``%s'' at the prompt"
#~ msgstr ""
#~ "HTP ブートフロッピーがつくれませんでした。\n"
#~ "インストールをやりなおして、プロンプトで``%s''と入力してみてください。"

#~ msgid "User name:"
#~ msgstr "ユーザ名:"

#~ msgid "Password:"
#~ msgstr "パスワード:"

#~ msgid "server"
#~ msgstr "サーバ"

#~ msgid "expert"
#~ msgstr "エキスパート"

#~ msgid "developer"
#~ msgstr "開発者"

#~ msgid "beginner"
#~ msgstr "初心者"

#~ msgid "Linear (needed for some SCSI drives)"
#~ msgstr "リニア (SCSI ドライブの一部で必要)"

#~ msgid "linear"
#~ msgstr "リニア"

#~ msgid "After %s partition %s,"
#~ msgstr "%s パーティションから %s,"

#~ msgid "changing type of"
#~ msgstr "タイプの変更"

#~ msgid "formatting"
#~ msgstr "フォーマット中"

#~ msgid "resizing"
#~ msgstr "リサイズ中"

#~ msgid "Size: %s MB"
#~ msgstr "サイズ: %s MB"

#~ msgid "Bad kickstart file %s (failed %s)"
#~ msgstr "不正なキックスタートファイル %s (%s 失敗)"

#~ msgid "Too many packages chosen: %dMB doesn't fit in %dMB"
#~ msgstr "選んだパッケージが多すぎます。%dMB あるので %dMB におさまりません。"

#~ msgid "Going to install %d MB. You can choose to install more programs"
#~ msgstr "%d MB をインストールします。ほかのプログラムをインストール出来ます"

#~ msgid "Installation CD Nr 1"
#~ msgstr "インストレーション CD Nr 1"

#~ msgid "Local LAN"
#~ msgstr "ローカル LAN"