# italian transltion of drakflopy
# Copyright (C) 2000, 2001 MandrakSoft S.A.
# Paolo Lorenzin <pasusu@tin.it>, 2000.
# Roberto Rosselli Del Turco <rosselli@ling.unipi.it>, 2001.
# Simone Riccio <s.riccio@aeb-informatica.it>, 2002
# Roberto Rosselli Del Turco <rosselli@ling.unipi.it>, 2002
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
"POT-Creation-Date: 2002-12-05 19:52+0100\n"
"PO-Revision-Date: 2002-12-09 23:35+0100\n"
"Last-Translator: Andrea Celli <a.celli@caltanet.it>\n"
"Language-Team: Italian <tp@lists.linux.it>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.9.6\n"

#: ../../any.pm:1
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
"Per autorizzare un utente a condividere le proprie directory, bisogna "
"aggiungerlo al gruppo \"fileshare\".\n"
"Questo può essere fatto usando \"userdrake\"."

#: ../../any.pm:1 ../../install_steps_gtk.pm:1
#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
#: ../../standalone/draksec:1 ../../standalone/logdrake:1
#: ../../standalone/net_monitor:1
#, c-format
msgid "Cancel"
msgstr "Annulla"

#: ../../any.pm:1
#, c-format
msgid "Launch userdrake"
msgstr "Lancia userdrake"

#: ../../any.pm:1
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
"Volete permettere agli utenti di condividere qualcuna delle loro directory?\n"
"Se lo consentite gli utenti potranno semplicemente usare l'opzione "
"\"Condividi\" \n"
"in Konqueror o Nautilus.\n"
"\n"
"\"Personalizzata\" permette un controllo più preciso per ogni utente.\n"

#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
msgid "Mandatory package %s is missing"
msgstr "Manca il pacchetto %s, che è indispensabile"

#: ../../any.pm:1
#, c-format
msgid ""
"You can export using NFS or Samba. Please select which you'd like to use."
msgstr ""
"Si vuole esportare usando NFS (protocollo Unix) o SMB (protocollo Windows)?"

#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "Il pacchetto %s deve essere installato. Lo installo?"

#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
msgid "Custom"
msgstr "Personalizzata"

#: ../../any.pm:1
#, c-format
msgid "Allow all users"
msgstr "Permetti a tutti gli utenti"

#: ../../any.pm:1
#, c-format
msgid "No sharing"
msgstr "Nessuna condivisione"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "More"
msgstr "Ancora"

#: ../../any.pm:1
#, fuzzy, c-format
msgid "Here is the full list of available countries"
msgstr "Ecco la lista completa delle tastiere disponibili"

#: ../../any.pm:1
#, fuzzy, c-format
msgid "Please choose your country."
msgstr "Per favore, scegliete il tipo del vostro mouse."

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Country"
msgstr "Nazione:"

#: ../../any.pm:1
#, c-format
msgid "All languages"
msgstr "Tutte le lingue"

#: ../../any.pm:1
#, c-format
msgid "Use Unicode by default"
msgstr ""

#: ../../any.pm:1
#, c-format
msgid ""
"Mandrake Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr ""
"Mandrake Linux può gestire più di una lingua.\n"
"Selezionare le lingue da installare. Esse saranno disponibili\n"
"quando si riavverà il sistema dopo aver finito l'installazione."

#: ../../any.pm:1
#, c-format
msgid "Please choose a language to use."
msgstr "Scegliere la lingua da utilizzare."

#: ../../any.pm:1
#, c-format
msgid "Choose the window manager to run:"
msgstr "Scegliere il window manager da usare:"

#: ../../any.pm:1
#, c-format
msgid "Choose the default user:"
msgstr "Scegliere l'utente predefinito"

#: ../../any.pm:1
#, fuzzy, c-format
msgid "Do you want to use this feature?"
msgstr "Vuoi usare aboot?"

#: ../../any.pm:1
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr ""
"Si può configurare il computer per fare automaticamente il login di un "
"utente all'avvio."

#: ../../any.pm:1
#, c-format
msgid "Autologin"
msgstr "Autologin"

#: ../../any.pm:1
#, c-format
msgid "Icon"
msgstr "Icona"

#: ../../any.pm:1
#, c-format
msgid "Shell"
msgstr "Shell"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Password (again)"
msgstr "Password (ripeti)"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
#: ../../standalone/drakconnect:1
#, c-format
msgid "Password"
msgstr "Password"

#: ../../any.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "User name"
msgstr "Nome come utente"

#: ../../any.pm:1
#, c-format
msgid "Real name"
msgstr "Vero nome"

#: ../../any.pm:1
#, c-format
msgid "Accept user"
msgstr "Accettare utente"

#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
#, c-format
msgid "Done"
msgstr "Fatto"

#: ../../any.pm:1
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Inserire un utente\n"
"%s"

#: ../../any.pm:1
#, c-format
msgid "Add user"
msgstr "Aggiungere un utente"

#: ../../any.pm:1
#, c-format
msgid "This user name has already been added"
msgstr "Questo nome utente è già stato inserito"

#: ../../any.pm:1
#, c-format
msgid "The user name is too long"
msgstr "Questo nome utente è troppo lungo"

#: ../../any.pm:1
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""
"Il nome utente deve contenere solo lettere minuscole, numeri, \"-\" e \"_\""

#: ../../any.pm:1
#, c-format
msgid "Please give a user name"
msgstr "Inserire il nome di un utente, grazie"

#: ../../any.pm:1
#, c-format
msgid "This password is too simple"
msgstr "Questa password è troppo semplice"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Please try again"
msgstr "Per favore, riprovare"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "The passwords do not match"
msgstr "Le password non corrispondono"

#: ../../any.pm:1
#, c-format
msgid "(already added %s)"
msgstr "(%s già aggiunto)"

#: ../../any.pm:1
#, c-format
msgid "access to compilation tools"
msgstr "accesso agli strumenti di compilazione"

#: ../../any.pm:1
#, c-format
msgid "access to network tools"
msgstr "accesso agli strumenti di rete"

#: ../../any.pm:1
#, c-format
msgid "access to administrative files"
msgstr "accesso ai file di amministrazione del sistema"

#: ../../any.pm:1
#, c-format
msgid "allow \"su\""
msgstr "permettere \"su\""

#: ../../any.pm:1
#, c-format
msgid "access to rpm tools"
msgstr "accesso agli strumenti RPM"

#: ../../any.pm:1
#, c-format
msgid "access to X programs"
msgstr "accesso ai programmi X"

#: ../../any.pm:1
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"Finora ci sono queste voci nel menu di boot.\n"
"Se ne possono aggiungere altre o cambiare quelle esistenti."

#: ../../any.pm:1
#, c-format
msgid "Other OS (windows...)"
msgstr "Altro S.O. (windows...)"

#: ../../any.pm:1
#, c-format
msgid "Other OS (MacOS...)"
msgstr "Altro S.O. (MacOS...)"

#: ../../any.pm:1
#, c-format
msgid "Other OS (SunOS...)"
msgstr "Altro S.O. (SunOS...)"

#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Linux"
msgstr "Linux"

#: ../../any.pm:1
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "Che tipo di voce si vuole aggiungere?"

#: ../../any.pm:1
#, c-format
msgid "This label is already used"
msgstr "Questa etichetta è già stata usata"

#: ../../any.pm:1
#, c-format
msgid "You must specify a root partition"
msgstr "Bisogna specificare una partizione root"

#: ../../any.pm:1
#, c-format
msgid "You must specify a kernel image"
msgstr "Bisogna indicare l'immagine di un kernel"

#: ../../any.pm:1
#, c-format
msgid "Empty label not allowed"
msgstr "Non sono ammesse etichette vuote"

#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
msgid "Default"
msgstr "Predefinito"

#: ../../any.pm:1
#, c-format
msgid "NoVideo"
msgstr "No Video"

#: ../../any.pm:1
#, c-format
msgid "Initrd-size"
msgstr "Dimensioni Initrd"

#: ../../any.pm:1
#, c-format
msgid "Append"
msgstr "Opzioni per il kernel"

#: ../../any.pm:1
#, c-format
msgid "Label"
msgstr "Etichetta"

#: ../../any.pm:1
#, c-format
msgid "Unsafe"
msgstr "Non sicuro"

#: ../../any.pm:1
#, c-format
msgid "Table"
msgstr "Tabella"

#: ../../any.pm:1
#, c-format
msgid "Root"
msgstr "Root"

#: ../../any.pm:1
#, c-format
msgid "Read-write"
msgstr "Lettura/scrittura"

#: ../../any.pm:1
#, c-format
msgid "Initrd"
msgstr "Initrd"

#: ../../any.pm:1
#, c-format
msgid "Video mode"
msgstr "Modo video"

#: ../../any.pm:1
#, c-format
msgid "Image"
msgstr "Immagine"

#: ../../any.pm:1
#, c-format
msgid "Default OS?"
msgstr "Sistema operativo predefinito?"

#: ../../any.pm:1
#, c-format
msgid "Enable OF Boot?"
msgstr "Abilitare boot OF?"

#: ../../any.pm:1
#, c-format
msgid "Enable CD Boot?"
msgstr "Abilitare l'avvio da CD-ROM?"

#: ../../any.pm:1
#, c-format
msgid "Kernel Boot Timeout"
msgstr "Attesa per il boot del kernel"

#: ../../any.pm:1
#, c-format
msgid "Open Firmware Delay"
msgstr "Attesa dell'Open Firmware"

#: ../../any.pm:1
#, c-format
msgid "Boot device"
msgstr "Dispositivo di boot"

#: ../../any.pm:1
#, c-format
msgid "Init Message"
msgstr "Messaggio di init"

#: ../../any.pm:1
#, c-format
msgid "Bootloader to use"
msgstr "Bootloader da usare"

#: ../../any.pm:1
#, c-format
msgid "Bootloader main options"
msgstr "Opzioni principali del bootloader"

#: ../../any.pm:1
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"L'opzione \"Opzioni da riga di comando solo con password\" \n"
" è inutile senza una password"

#: ../../any.pm:1
#, c-format
msgid "Give the ram size in MB"
msgstr "Specificare dimensione RAM in MB"

#: ../../any.pm:1
#, c-format
msgid "Enable multiple profiles"
msgstr "Abilitare profili multipli"

#: ../../any.pm:1
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Precisare la dimensione RAM se necessario (trovati %d MB)"

#: ../../any.pm:1
#, c-format
msgid "Clean /tmp at each boot"
msgstr "Svuota /tmp ad ogni avvio"

#: ../../any.pm:1
#, c-format
msgid "Create a bootdisk"
msgstr "Crea disco di boot"

#: ../../any.pm:1
#, c-format
msgid "restrict"
msgstr "con password"

#: ../../any.pm:1
#, c-format
msgid "Restrict command line options"
msgstr "Opzioni da riga di comando solo con password"

#: ../../any.pm:1
#, c-format
msgid "Force No APIC"
msgstr ""

#: ../../any.pm:1
#, fuzzy, c-format
msgid "Enable ACPI"
msgstr "Abilitare l'avvio da CD-ROM?"

#: ../../any.pm:1
#, c-format
msgid "Delay before booting default image"
msgstr "Ritardo prima di avviare con l'immagine predefinita"

#: ../../any.pm:1
#, c-format
msgid "compact"
msgstr "compatta"

#: ../../any.pm:1
#, c-format
msgid "Compact"
msgstr "Compatta"

#: ../../any.pm:1
#, c-format
msgid "Bootloader installation"
msgstr "Installazione del bootloader"

#: ../../any.pm:1
#, c-format
msgid "First sector of boot partition"
msgstr "Primo settore della partizione di boot"

#: ../../any.pm:1
#, c-format
msgid "First sector of drive (MBR)"
msgstr "Primo settore del disco rigido (MBR)"

#: ../../any.pm:1
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "Dove vuoi installare il bootloader?"

#: ../../any.pm:1
#, c-format
msgid "LILO/grub Installation"
msgstr "Installazione di LILO/grub"

#: ../../any.pm:1
#, c-format
msgid "SILO Installation"
msgstr "Installazione di SILO"

#: ../../any.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Skip"
msgstr "Salta"

#: ../../any.pm:1
#, c-format
msgid "On Floppy"
msgstr "Su floppy"

#: ../../any.pm:1
#, c-format
msgid "First sector of the root partition"
msgstr "Primo settore della partizione root"

#: ../../any.pm:1
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"Si è deciso di installare il bootloader su una partizione.\n"
"Questo significa che esiste già un bootloader (ad es. System Commander)\n"
"installato sul disco fisso dal quale viene effettuato il boot.\n"
"\n"
"Da quale disco viene effettuato il boot?"

#: ../../any.pm:1
#, c-format
msgid "Creating bootdisk..."
msgstr "Creazione disco di avvio"

#: ../../any.pm:1
#, c-format
msgid "Insert a floppy in %s"
msgstr "Inserisci un floppy nel drive %s"

#: ../../any.pm:1
#, c-format
msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr ""
"Scegli il drive floppy che vuoi utilizzare per creare il disco di avvio"

#: ../../any.pm:1
#, c-format
msgid "Second floppy drive"
msgstr "Seconda unità floppy"

#: ../../any.pm:1
#, c-format
msgid "First floppy drive"
msgstr "Prima unità floppy"

#: ../../any.pm:1
#, c-format
msgid "Sorry, no floppy drive available"
msgstr "Spiacente, nessun drive floppy disponibile"

#: ../../any.pm:1
#, c-format
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"LILO (or grub) on your system, or another operating system removes LILO, or "
"LILO doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures. Would you like to create a bootdisk for your system?\n"
"%s"
msgstr ""
"Un disco di avvio personalizzato provvede un modo di accesso al tuo sistema\n"
"Linux senza dipendere dal normale bootloader. Ciò è utile se non vuoi\n"
"installare LILO (o Grub) sul tuo sistema, o un altro sistema operativo "
"rimuove\n"
"LILO o LILO non funziona con la tua configurazione hardware. Un disco di "
"avvio\n"
"personalizzato può anche essere usato con l'immagine di salvataggio di\n"
"Mandrake, rendendo molto più facile il ripristino dopo gravi errori\n"
"del sistema. Vuoi creare un disco di avvio per il tuo sistema?\n"
"%s"

#: ../../any.pm:1
#, c-format
msgid ""
"\n"
"\n"
"(WARNING! You're using XFS for your root partition,\n"
"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
"because XFS needs a very large driver)."
msgstr ""
"\n"
"\n"
"(ATTENZIONE! State usando XFS per la vostra partizione root,\n"
"molto probabilmente non sarà possibile creare un floppy di 1.44 MB\n"
"perché XFS necessita di in driver molto grande)."

#: ../../any.pm:1
#, c-format
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"SILO on your system, or another operating system removes SILO, or SILO "
"doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures.\n"
"\n"
"If you want to create a bootdisk for your system, insert a floppy in the "
"first\n"
"drive and press \"Ok\"."
msgstr ""
"Un disco di avvio personalizzato fornisce un modo di accesso al sistema\n"
"Linux senza dipendere dal normale bootloader. Ciò è utile se non si vuole\n"
"installare SILO sul sistema, o un altro sistema operativo rimuove SILO,\n"
"o SILO non funziona con questa configurazione hardware.\n"
"Un disco di avvio personalizzato può anche essere preparato con l'immagine\n"
"di salvataggio di Mandrake, rendendo molto più facile il ripristino dopo "
"gravi \n"
"malfunzionamenti del sistema.\n"
"\n"
"Se si vuole creare un disco di avvio per il sistema, inserire un floppy\n"
"nella prima unità e premere \"Ok\"."

#: ../../bootloader.pm:1
#, c-format
msgid "You can't install the bootloader on a %s partition\n"
msgstr "Non puoi installare il bootloader su una partizione %s\n"

#: ../../bootloader.pm:1
#, c-format
msgid "not enough room in /boot"
msgstr "spazio insufficiente in /boot"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "The highlighted entry will be booted automatically in %d seconds."
msgstr "La voce evidenziata verrà avviata automaticamente in %d secondi."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "commands before booting, or 'c' for a command-line."
msgstr "i comandi prima del boot, o \"c\" per dare una riga di comando."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "Press enter to boot the selected OS, 'e' to edit the"
msgstr ""
"Premete Invio per avviare il sistema operativo selezionato, \"e\" per "
"modificare"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "Use the %c and %c keys for selecting which entry is highlighted."
msgstr "Usate i tasti %c e %c per evidenziare la voce che interessa."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "Welcome to GRUB the operating system chooser!"
msgstr "Benvenuti in GRUB, il selezionatore di sistemi operativi!"

#: ../../bootloader.pm:1
#, c-format
msgid "Yaboot"
msgstr "Yaboot"

#: ../../bootloader.pm:1
#, c-format
msgid "Grub"
msgstr "Grub"

#: ../../bootloader.pm:1
#, c-format
msgid "LILO with text menu"
msgstr "LILO con menu testuale"

#: ../../bootloader.pm:1
#, c-format
msgid "LILO with graphical menu"
msgstr "LILO con menu grafico"

#: ../../bootloader.pm:1
#, c-format
msgid "SILO"
msgstr "SILO"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: ../../bootloader.pm:1
#, c-format
msgid ""
"Welcome to %s the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait %d seconds for default boot.\n"
"\n"
msgstr ""
"Benvenuti in %s, il selezionatore di sistemi operativi!\n"
"\n"
"Scegliere un sistema operativo nella lista qui sopra,\n"
"o aspettare %d secondi per il boot predefinito.\n"
"\n"

#: ../../common.pm:1
#, c-format
msgid "consolehelper missing"
msgstr "manca l'aiuto per la console"

#: ../../common.pm:1
#, c-format
msgid "kdesu missing"
msgstr "kdesu manca"

#: ../../common.pm:1
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr "Dopo l'installazione, in %s saranno disponibili degli screenshot"

#: ../../common.pm:1
#, c-format
msgid "Can't make screenshots before partitioning"
msgstr "Impossibile fare degli screenshot prima del partizionamento"

#: ../../common.pm:1
#, c-format
msgid "%d seconds"
msgstr "%d secondi"

#: ../../common.pm:1
#, c-format
msgid "1 minute"
msgstr "1 minuto"

#: ../../common.pm:1
#, c-format
msgid "%d minutes"
msgstr "%d minuti"

#: ../../common.pm:1
#, c-format
msgid "TB"
msgstr "TB"

#: ../../common.pm:1
#, c-format
msgid "GB"
msgstr "GB"

#: ../../common.pm:1
#, c-format
msgid "MB"
msgstr "MB"

#: ../../common.pm:1
#, c-format
msgid "KB"
msgstr "KB"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "United States"
msgstr "Stati Uniti d'America"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Austria"
msgstr "Austria"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, c-format
msgid "Italy"
msgstr "Italia"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "Netherlands"
msgstr "Paesi Bassi"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Sweden"
msgstr "Svezia"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Norway"
msgstr "Norvegia"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Greece"
msgstr "Grecia"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Germany"
msgstr "Germania"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Czech Republic"
msgstr "Repubblica Ceca"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "Belgium"
msgstr "Belgio"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "France"
msgstr "Francia"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Costa Rica"
msgstr "Costa Rica"

#: ../../fsedit.pm:1
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "Errore aprendo %s in scrittura: %s"

#: ../../fsedit.pm:1
#, c-format
msgid "Nothing to do"
msgstr "Nulla da fare"

#: ../../fsedit.pm:1
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "Non c'è abbastanza spazio libero per l'allocazione automatica"

#: ../../fsedit.pm:1
#, c-format
msgid "You can't use an encrypted file system for mount point %s"
msgstr "Non puoi usare un filesystem crittato per il punto di mount %s"

#: ../../fsedit.pm:1
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
"È richiesto un vero filesystem (ext2/ext3, reiserfs, xfs o jfs) per questo "
"punto di mount\n"

#: ../../fsedit.pm:1
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "Questa directory dovrebbe rimanere all'interno del filesystem root"

#: ../../fsedit.pm:1
#, c-format
msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr "Non puoi usare un Volume Logico LVM per il punto di mount %s"

#: ../../fsedit.pm:1
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"È stata selezionata una partizione RAID software come root (/).\n"
"Nessun bootloader può gestirla senza una partizione /boot.\n"
"Accertatsi che venga aggiunta una partizione /boot."

#: ../../fsedit.pm:1
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "C'è già una partizione con punto di mount %s\n"

# c-format
#: ../../fsedit.pm:1
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "Il nome degli punti di mount dovrebbe contenere solo lettere e numeri"

#: ../../fsedit.pm:1
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "I punti di mount devono iniziare con /"

#: ../../fsedit.pm:1
#, c-format
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr "Non si può usare ReiserFS per partizioni più piccole di 32MB"

#: ../../fsedit.pm:1
#, c-format
msgid "You can't use JFS for partitions smaller than 16MB"
msgstr "Non si può usare JFS per partizioni più piccole di 16 Mb"

#: ../../fsedit.pm:1
#, c-format
msgid ""
"I can't read the partition table of device %s, it's too corrupted for me :(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to loose all the partitions?\n"
msgstr ""
"La tabella delle partizioni del dispositivo %s è illeggibile, perché troppo "
"corrotta :(\n"
"Posso provare a continuare, svuotando le partizioni danneggiate\n"
"(TUTTI I DATI verranno persi!). L'altra soluzione è di impedire a DrakX di\n"
"modificare la tabella delle partizioni. (L'errore è %s)\n"
"\n"
"Si accetta di perdere tutte le partizioni?\n"

#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, c-format
msgid "Error"
msgstr "Errore"

#: ../../fsedit.pm:1
#, c-format
msgid "server"
msgstr "server"

#: ../../fsedit.pm:1
#, c-format
msgid "with /usr"
msgstr "con /usr"

#: ../../fsedit.pm:1
#, c-format
msgid "simple"
msgstr "semplice"

#: ../../fs.pm:1
#, c-format
msgid "Enabling swap partition %s"
msgstr "Sto attivando la partizione di swap %s"

#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
msgid "error unmounting %s: %s"
msgstr "errore in fase di unmount di %s: %s"

#: ../../fs.pm:1
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "il mount della partizione %s sulla directory %s non è riuscito"

#: ../../fs.pm:1
#, fuzzy, c-format
msgid "Mounting partition %s"
msgstr "Formattazione della partizione %s"

#: ../../fs.pm:1
#, fuzzy, c-format
msgid "Checking %s"
msgstr "Sto copiando %s"

#: ../../fs.pm:1
#, c-format
msgid "Formatting partition %s"
msgstr "Formattazione della partizione %s"

#: ../../fs.pm:1
#, c-format
msgid "Creating and formatting file %s"
msgstr "Sto creando e formattando il file %s"

#: ../../fs.pm:1
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr "Non so come formattare %s in tipo %s"

#: ../../fs.pm:1
#, c-format
msgid "%s formatting of %s failed"
msgstr "formattazione %s di %s fallita"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, c-format
msgid ""
"Click on \"Next ->\" if you want to delete all data and partitions present\n"
"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
"be able to recover any data and partitions present on this hard drive,\n"
"including any Windows data.\n"
"\n"
"Click on \"<- Previous\" to stop this operation without losing any data and\n"
"partitions present on this hard drive."
msgstr ""
"Cliccate sul pulsante \"Successivo\" se volete cancellare tutte le "
"partizioni\n"
"e i dati presenti su questo disco rigido. Prestate attenzione, dopo aver\n"
"cliccato su \"Successivo\" non potrete più recuperare le partizioni e\n"
"i dati presenti sul disco, compresi eventuali dati di Windows.\n"
"\n"
"Cliccate su \"Precedente\" per annullare questa operazione senza che venga\n"
"perso nulla dei dati o partizioni presenti su questo disco rigido."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
"and will not be recoverable!"
msgstr ""
"Scegliete il disco rigido che volete cancellare per poter installare la\n"
"nuova partizione per Mandrake Linux. Attenzione! tutti i dati presenti\n"
"andranno perduti e non saranno più recuperabili!"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"As a review, DrakX will present a summary of various information it has\n"
"about your system. Depending on your installed hardware, you may have some\n"
"or all of the following entries:\n"
"\n"
" * \"Mouse\": check the current mouse configuration and click on the button\n"
"to change it if necessary.\n"
"\n"
" * \"Keyboard\": check the current keyboard map configuration and click on\n"
"the button to change that if necessary.\n"
"\n"
" * \"Country\": check the current country selection. If you are not in this\n"
"country, click on the button and choose another one.\n"
"\n"
" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
"primary language you have chosen. But here, just as in your choice of a\n"
"keyboard, you may not be in a country to which the chosen language\n"
"corresponds. You may need to click on the \"Timezone\" button to\n"
"configure the clock for the correct timezone.\n"
"\n"
" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to setup a new printer. The interface\n"
"presented there is similar to the one used during installation.\n"
"\n"
" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
"click that button. This should be reserved to advanced users.\n"
"\n"
" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
"interface in \"800x600\" resolution. If that does not suits you, click on\n"
"the button to reconfigure your graphical interface.\n"
"\n"
" * \"Network\": If you want to configure your Internet or local network\n"
"access now, you can by clicking on this button.\n"
"\n"
" * \"Sound card\": if a sound card is detected on your system, it is\n"
"displayed here. If you notice the sound card displayed is not the one that\n"
"is actually present on your system, you can click on the button and choose\n"
"another driver.\n"
"\n"
" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
"here. If you have a TV card and it is not detected, click on the button to\n"
"try to configure it manually.\n"
"\n"
" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
"displayed here. You can click on the button to change the parameters\n"
"associated with the card."
msgstr ""
"Qui sono riportati vari parametri relativi al vostro sistema. In base\n"
"all'hardware installato, potrebbero essere visualizzate le seguenti voci:\n"
"\n"
" * \"Mouse\": controllate la configurazione attuale del mouse, e cliccate\n"
"sul pulsante per cambiarla, se necessario;\n"
"\n"
" * \"Tastiera\": controllate l'attuale impostazione della tastiera, e\n"
"cliccate sul pulsante per cambiarla, se necessario;\n"
"\n"
" * \"Fuso orario\": DrakX, come opzione predefinita, deduce il vostro fuso\n"
"orario dalla lingua che avete scelto. Ma anche in questo caso, come per la\n"
"scelta della tastiera, potreste non trovarvi nella nazione cui corrisponde\n"
"la lingua che avete scelto; in tal caso sarà necessario cliccare su questo\n"
"pulsante per poter configurare il fuso orario in base a quello dell'area\n"
"geografica in cui vivete;\n"
"\n"
" * \"Stampante\": cliccando sul pulsante \"Nessuna stampante\" si\n"
"richiamerà l'assistente di configurazione della stampante. Consultate il\n"
"relativo capitolo della \"User Guide\" per avere maggiori informazioni su\n"
"come configurare una nuova stampante. L'interfaccia descritta in tale sede\n"
"è simile a quella utilizzata nel corso dell'installazione;\n"
"\n"
" * \"Scheda audio\": se sul vostro sistema è stata individuata una scheda\n"
"audio, verrà mostrata qui. Al momento dell'installazione non è possibile\n"
"apportare alcuna modifica;\n"
"\n"
" * \"Scheda TV\": se sul vostro sistema è stata individuata una scheda TV,\n"
"verrà mostrata qui. Al momento dell'installazione non è possibile apportare\n"
"alcuna modifica;\n"
"\n"
" * \"Scheda ISDN\": se sul vostro sistema è stata individuata una scheda\n"
"ISDN, verrà mostrata qui. Potete cliccare sul pulsante relativo per\n"
"cambiarne i parametri."

#: ../../help.pm:1
#, c-format
msgid ""
"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
"here. If you notice the sound card displayed is not the one that is\n"
"actually present on your system, you can click on the button and choose\n"
"another driver."
msgstr ""

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, c-format
msgid ""
"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
"detected and installed in the bootloader menu. If this is not the case, you\n"
"can add an entry by hand in this screen. Be careful to choose the correct\n"
"parameters.\n"
"\n"
"Yaboot's main options are:\n"
"\n"
" * Init Message: a simple text message displayed before the boot prompt.\n"
"\n"
" * Boot Device: indicates where you want to place the information required\n"
"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
"to hold this information.\n"
"\n"
" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
"yaboot. The first delay is measured in seconds and at this point, you can\n"
"choose between CD, OF boot, MacOS or Linux;\n"
"\n"
" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
"After selecting Linux, you will have this delay in 0.1 second before your\n"
"default kernel description is selected;\n"
"\n"
" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
"at the first boot prompt.\n"
"\n"
" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
"Open Firmware at the first boot prompt.\n"
"\n"
" * Default OS: you can select which OS will boot by default when the Open\n"
"Firmware Delay expires."
msgstr ""

#: ../../help.pm:1
#, c-format
msgid ""
"You can add additional entries in yaboot for other operating systems,\n"
"alternate kernels, or for an emergency boot image.\n"
"\n"
"For other OSs, the entry consists only of a label and the \"root\"\n"
"partition.\n"
"\n"
"For Linux, there are a few possible options:\n"
"\n"
" * Label: this is the name you will have to type at the yaboot prompt to\n"
"select this boot option.\n"
"\n"
" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
"or a variation of vmlinux with an extension.\n"
"\n"
" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
"\n"
" * Append: on Apple hardware, the kernel append option is often used to\n"
"assist in initializing video hardware, or to enable keyboard mouse button\n"
"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
"The following are some examples:\n"
"\n"
"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
"hda=autotune\n"
"\n"
"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: this option can be used either to load initial modules before\n"
"the boot device is available, or to load a ramdisk image for an emergency\n"
"boot situation.\n"
"\n"
" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
"need to allocate a large ramdisk, this option can be used to specify a\n"
"ramdisk larger than the default.\n"
"\n"
" * Read-write: normally the \"root\" partition is initially mounted as\n"
"read-only, to allow a file system check before the system becomes ``live''.\n"
"You can override the default with this option.\n"
"\n"
" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
"problematic, you can select this option to boot in ``novideo'' mode, with\n"
"native frame buffer support.\n"
"\n"
" * Default: selects this entry as being the default Linux selection,\n"
"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
"highlighted with a ``*'' if you press [Tab] to see the boot selections."
msgstr ""

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX will ask you if you have\n"
"a PCI SCSI installed. Clicking \" Yes\" will display a list of SCSI cards\n"
"to choose from. Click \"No\" if you know that you have no SCSI hardware in\n"
"your machine. If you're not sure, you can check the list of hardware\n"
"detected in your machine by selecting \"See hardware info \" and clicking\n"
"the \"Next ->\". Examine the list of hardware and then click on the \"Next\n"
"->\" button to return to the SCSI interface question.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
"Ora DrakX procederà con il rilevamento di tutti i dischi rigidi e altri\n"
"dispositivi IDE presenti sul vostro computer, e cercherà anche di stabilire\n"
"se sul vostro sistema sono presenti una o più schede SCSI di tipo PCI. Se\n"
"verrà individuato un dispositivo di questo tipo, DrakX installerà\n"
"automaticamente il driver appropriato.\n"
"\n"
"Dato che il riconoscimento automatico in alcuni casi potrebbe non riuscire\n"
"ad individuare una particolare periferica, vi verrà comunque chiesto se\n"
"avete una scheda SCSI PCI diversa da quelle eventualmente identificate\n"
"oppure no. Scegliete \"Sì\" se siete sicuri che nel vostro computer è\n"
"presente un'altra scheda SCSI: potrete scegliere la vostra scheda da una\n"
"lista. Scegliete \"No\" se non disponete di nessun tipo di hardware SCSI, o\n"
"se siete soddisfatti del riconoscimento automatico. Se non siete sicuri,\n"
"potete anche controllare la lista dell'hardware rilevato nella vostra\n"
"macchina selezionando \"Vedi informazioni hardware\" e cliccando su\n"
"\"Successivo\".\n"
"Controllate l'elenco dell'hardware individuato e poi cliccate sul pulsante\n"
"\"Successivo\" per ritornare alla domanda relativa alla scheda SCSI.\n"
"\n"
"Se sarete costretti a specificare manualmente il tipo di scheda in vostro\n"
"possesso, DrakX vi chiederà se intendete indicare delle opzioni da usare\n"
"con essa. Vi consigliamo di permettere a DrakX di esaminare l'hardware per\n"
"stabilire le particolari opzioni della scheda che dovranno essere usate\n"
"all'inizializzazione; questo metodo in genere permette di ottenere buoni\n"
"risultati.\n"
"\n"
"Se DrakX non riesce a stabilire quali sono le opzioni da passare alla\n"
"scheda, dovrete specificarle manualmente."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
# fuzzy, c-format
#: ../../help.pm:1
#, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other OSs may\n"
"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
"is best for a particular type of configuration.\n"
"\n"
" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
"\" will handle only very simple network cases and is somewhat slow when\n"
"used with networks.) It's recommended that you use \"pdq \" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
"printing to your local printer or to one halfway around the planet. It is\n"
"simple to configure and can act as a server or a client for the ancient\n"
"\"lpd \" printing system, so it compatible with older operating systems\n"
"that may still need print services. While quite powerful, the basic setup\n"
"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
"front-ends for printing or choosing printer options and for managing the\n"
"printer.\n"
"\n"
"If you make a choice now, and later find that you don't like your printing\n"
"system you may change it by running PrinterDrake from the Mandrake Control\n"
"Center and clicking the expert button."
msgstr ""
"Qui potrete scegliere il sistema di stampa da usare con questo computer.\n"
"Altri sistemi operativi possono offrirvene uno, ma Mandrake Linux ve ne\n"
"offre ben tre.\n"
"\n"
" * \"pdq\" - che sta per \"print, don't queue\" (\"stampa, non mettere in\n"
"coda\"), è una buona scelta se avete una connessione diretta con la\n"
"stampante e volete essere in grado di risolvere rapidamente eventuali\n"
"inceppamenti della carta, e inoltre non avete altre stampanti connesse via\n"
"rete. Infatti può gestire solo connessioni di rete molto semplici ed è\n"
"comunque piuttosto lento in quest'ultimo caso. Scegliete \"pdq\" se questa\n"
"è la vostra prima volta con GNU/Linux. Potrete cambiare la vostra scelta\n"
"dopo aver terminato l'installazione lanciando PrinterDrake dal Centro di\n"
"controllo Mandrake e cliccando sul pulsante Esperto.\n"
"\n"
" * \"CUPS\" - \"Common Unix Printing System\" (\"Sistema di stampa\n"
"unificato per Unix\"), offre risultati eccellenti sia che dobbiate stampare\n"
"sulla vostra stampante locale, sia nel caso che la stampa debba essere\n"
"effettuata sull'altra faccia del pianeta. È semplice da usare e può agire\n"
"come server o client per il vecchio sistema di stampa \"lpd\". Infatti è\n"
"compatibile con i sistemi precedenti. Ha molte frecce al suo arco, ma la\n"
"configurazione base è quasi altrettanto semplice di quella per \"pdq\".\n"
"Se avete bisogno di emulare un server \"lpd\" dovete attivare il demone\n"
"\"cups-lpd\". Dispone di interfaccia grafica per la stampa e per la\n"
"configurazione delle opzioni della stampante.\n"
"\n"
" * \"lprNG\" - \"line printer daemon New Generation\" (\"demone di stampa\n"
"di nuova generazione\". Questo sistema è approssimativamente equivalente\n"
"agli altri, ma è anche in grado di stampare su dispositivi collegati per\n"
"mezzo di una rete Novell, dato che supporta il protocollo IPX, e può\n"
"stampare direttamente in base a comandi via shell. Se avete bisogno di una\n"
"connessione di tipo Novell, o di stampare senza fare uso di pipe,\n"
"utilizzate lprNG. In caso contrario, è preferibile usare CUPS dato che è\n"
"più semplice e migliore nel gestire stampanti di rete."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
"automated. DrakX will analyze the disk boot sector and act according to\n"
"what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
"boot sector. This way you will be able to load either GNU/Linux or another\n"
"OS.\n"
"\n"
" * if a grub or LILO boot sector is found, it will replace it with a new\n"
"one.\n"
"\n"
"If it cannot make a determination, DrakX will ask you where to place the\n"
"bootloader.\n"
"\n"
"\"Boot device\": in most cases, you will not change the default (\"First\n"
"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
"(\"On Floppy\").\n"
"\n"
"Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
"handy.\n"
"\n"
"The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
"booting the CD-ROM, pressing the >> F1<< key at boot and typing >>rescue<<\n"
"at the prompt. If your computer cannot boot from the CD-ROM, there are at\n"
"least two situations where having a boot floppy is critical:\n"
"\n"
" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
"of your main disk (unless you are using another boot manager), to allow you\n"
"to start up with either Windows or GNU/Linux (assuming you have Windows on\n"
"your system). If at some point you need to reinstall Windows, the Microsoft\n"
"install process will rewrite the boot sector and remove your ability to\n"
"start GNU/Linux!\n"
"\n"
" * if a problem arises and you cannot start GNU/Linux from the hard disk,\n"
"this floppy will be the only means of starting up GNU/Linux. It contains a\n"
"fair number of system tools for restoring a system that has crashed due to\n"
"a power failure, an unfortunate typing error, a forgotten root password, or\n"
"any other reason.\n"
"\n"
"If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
"floppy disk must be blank or have non-critical data on it - DrakX will\n"
"format the floppy and will rewrite the whole disk."
msgstr ""
"Il CD-ROM di Mandrake Linux ha una modalità \"salvataggio\" preconfigurata.\n"
"Potete accedervi effettuando il boot dal CD-ROM, premendo il tasto >>F1<<\n"
"all'avvio e digitando >>rescue<< dal prompt. Ma se il vostro computer non\n"
"può essere avviato dal CD-ROM, dovete effettuare questa operazione (la\n"
"creazione di un disco di avvio) per almeno due ragioni:\n"
"\n"
" * quando il bootloader verrà installato, DrakX riscriverà il settore di\n"
"boot (MBR) del vostro disco principale (a meno che voi non usiate un altro\n"
"gestore del boot), in modo che possiate avviare sia Windows che GNU/Linux,\n"
"se sul vostro sistema è installato anche Windows. Tuttavia, se in futuro si\n"
"renderà necessario re-installare Windows, il programma di installazione\n"
"Microsoft riscriverà il settore di boot, e di conseguenza non sarete più in\n"
"grado di avviare GNU/Linux!\n"
"\n"
" * se si verifica un problema per cui non potete più lanciare GNU/Linux dal\n"
"disco rigido, questo dischetto sarà l'unico mezzo per avviare GNU/Linux:\n"
"contiene un buon numero di programmi di amministrazione del sistema per\n"
"rimettere in sesto un'installazione che ha subito un crash per\n"
"un'interruzione di corrente, uno sfortunato errore di battitura, una\n"
"password dimenticata o qualsiasi altra ragione.\n"
"\n"
"Quando cliccherete su \"Sì\", vi verrà chiesto di inserire un disco in un\n"
"lettore di floppy. Naturalmente il dischetto che utilizzerete deve essere\n"
"vuoto o contenere soltanto dati di cui non avete più bisogno. Non sarà\n"
"necessario formattarlo: DrakX riscriverà l'intero disco."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"After you have configured the general bootloader parameters, the list of\n"
"boot options that will be available at boot time will be displayed.\n"
"\n"
"If there are other operating systems installed on your machine they will\n"
"automatically be added to the boot menu. You can fine-tune the existing\n"
"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
"your changes.\n"
"\n"
"You may also not want to give access to these other operating systems to\n"
"anyone who goes to the console and reboots the machine. You can delete the\n"
"corresponding entries for the operating systems to remove them from the\n"
"bootloader menu, but you will need a boot disk in order to boot those other\n"
"operating systems!"
msgstr ""
"Dopo aver configurato i parametri generali del bootloader, verrà mostrata\n"
"la lista delle opzioni che saranno disponibili al momento dell'avvio del\n"
"sistema.\n"
"\n"
"Se sulla vostra macchina è installato un altro sistema operativo, verrà\n"
"automaticamente aggiunto al menu di avvio. Qui potete scegliere una\n"
"configurazione più precisa delle opzioni disponibili. Cliccate su una delle\n"
"voci e poi su \"Modifica\" per modificarla o rimuoverla; \"Aggiungi\" crea\n"
"una nuova voce; cliccando su \"Fatto\" passerete alla fase successiva.\n"
"\n"
"Potreste anche non voler dare l'accesso a questi sistemi operativi a\n"
"chiunque, nel qual caso potete cancellare le voci corrispondenti, ma in\n"
"questo caso avrete bisogno di un boot disk per caricarli!"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"This dialog allows to finely tune your bootloader:\n"
"\n"
" * \"Bootloader to use\": there are three choices for your bootloader:\n"
"\n"
"    * \"GRUB\": if you prefer grub (text menu).\n"
"\n"
"    * \"LILO with text menu\": if you prefer LILO with its text menu\n"
"interface.\n"
"\n"
"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
"interface.\n"
"\n"
" * \"Boot device\": in most cases, you will not change the default\n"
"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
"\n"
" * \"Delay before booting the default image\": after a boot or a reboot of\n"
"the computer, this is the delay given to the user at the console to select\n"
"a boot entry other than the default.\n"
"\n"
"!! Beware that if you choose not to install a bootloader (by selecting\n"
"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
"system! Be sure you know what you do before changing any of the options. !!\n"
"\n"
"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
"that are reserved for the expert user."
msgstr ""
"LILO e grub sono due \"bootloader\" di GNU/Linux. Un bootloader è un\n"
"programma per l'avvio di uno o più sistemi operativi. Questa fase, in\n"
"genere, è del tutto automatica; DrakX, infatti, analizza il settore di boot\n"
"del disco, e si comporta in base a quello che vi trova:\n"
"\n"
" * se trova un settore di boot di Windows, lo rimpiazza con un settore di\n"
"boot di grub o LILO, in modo da permettervi di lanciare GNU/Linux o un\n"
"altro OS;\n"
"\n"
" * se trova un settore di boot di grub o LILO, lo sostituisce con uno\n"
"nuovo.\n"
"\n"
"In caso di dubbio, DrakX mostrerà una finestra di dialogo con varie\n"
"opzioni:\n"
"\n"
" * \"Bootloader da usare\": avete tre scelte a disposizione:\n"
"\n"
"    * \"GRUB\": se preferite grub (menu in modo testo);\n"
"\n"
"    * \"LILO con menu grafico\": se preferite LILO con la sua interfaccia\n"
"grafica;\n"
"\n"
"    * \"LILO con menu in modo testo\": se preferite LILO nella sua versione\n"
"con menu in modo testo.\n"
"\n"
" * \"Dispositivo di boot\": nella maggior parte dei casi non sarà\n"
"necessario cambiare le impostazioni predefinite (\"/dev/hda\"), ma, se lo\n"
"preferite, il bootloader può essere installato sul secondo disco rigido\n"
"(\"/dev/hdb\"), o persino su un floppy (\"/dev/fd0\");\n"
"\n"
" * \"Ritardo prima di avviare con l'immagine predefinita\": è il tempo\n"
"lasciato all'utente per scegliere una voce diversa da quella predefinita\n"
"nel menu del bootloader.\n"
"\n"
"!! Prestate particolare attenzione al fatto che, se scegliete di non\n"
"installare un bootloader (scegliendo \"Annulla\" nella finestra di cui\n"
"sopra), dovete essere sicuri di poter avviare il vostro sistema Mandrake\n"
"Linux in altro modo! Accertatevi anche di sapere quello che fate se\n"
"modificate qualcuna delle opzioni. !!\n"
"\n"
"Cliccando sul pulsante \"Avanzato\" di questa finestra avrete la\n"
"possibilità di scegliere tra molte opzioni avanzate, riservate agli utenti\n"
"esperti."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
# fuzzy, c-format
#: ../../help.pm:1
#, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you have to enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only one authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That is why you must choose a password that is difficult to\n"
"guess - DrakX will tell you if the password that you chose too easy. As you\n"
"can see, you are not forced to enter a password, but we strongly advise you\n"
"against. GNU/Linux is as prone to operator error as any other operating\n"
"system. Since \"root\" can overcome all limitations and unintentionally\n"
"erase all data on partitions by carelessly accessing the partitions\n"
"themselves, it is important that it be difficult to become \"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it too\n"
"easy to compromise a system.\n"
"\n"
"One caveat -- do not make the password too long or complicated because you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it in. To reduce\n"
"the chance of a blind typing error you will need to enter the password\n"
"twice. If you do happen to make the same typing error twice, this\n"
"``incorrect'' password will have to be used the first time you connect.\n"
"\n"
"If you wish access to this computer to be controlled by an authentication\n"
"server, click the \"Advanced\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one as \"authentication\". If you do not\n"
"know which to use, ask your network administrator.\n"
"\n"
"If you happen to have problems with reminding passwords, you can choose to\n"
"have \"No password\", if your computer won't be connected to the Internet,\n"
"and if you trust anybody having access to it."
msgstr ""
"Questo è il punto più critico per la sicurezza del vostro sistema\n"
"GNU/Linux: state per decidere la password di \"root\". \"root\" è\n"
"l'amministratore del sistema, ed è l'unico utente autorizzato a compiere\n"
"aggiornamenti, aggiungere altri utenti, cambiare la configurazione globale\n"
"del sistema, ecc. In breve, può fare tutto ciò che vuole! Questo è il\n"
"motivo per cui dovete scegliere una password che sia difficile da\n"
"indovinare: DrakX vi dirà se è troppo facile. Potete anche scegliere di non\n"
"digitare una password, ma vi consigliamo caldamente di farlo, almeno\n"
"per un motivo: non pensate che, avviando il sistema con GNU/Linux, gli\n"
"altri sistemi operativi che convivono con esso sulla stessa macchina siano\n"
"al sicuro da errori; al contrario: \"root\" può scavalcare ogni limitazione\n"
"e (magari involontariamente) cancellare tutti i dati presenti sulle\n"
"partizioni accedendo in maniera scorretta a queste ultime! Quindi è molto\n"
"importante che sia difficile per gli utenti normali diventare \"root\".\n"
"\n"
"La password ideale è costituita da un insieme di caratteri alfanumerici\n"
"lungo almeno 8 caratteri. Non scrivete mai su qualche appunto la password\n"
"di \"root\", renderebbe troppo facile l'accesso al sistema da parte da\n"
"estranei.\n"
"\n"
"Prestate attenzione, tuttavia, a non scegliere una password troppo lunga o\n"
"complicato, perché dovrete essere in grado di ricordarvelo senza troppo\n"
"sforzo.\n"
"\n"
"La password non verrà mostrata mentre la digitate. Per questo motivo è\n"
"necessario che venga inserita due volte, per ridurre il rischio di un\n"
"errore di battitura. Se per caso commettete lo stesso errore due volte,\n"
"questa password \"scorretto\" sarà quello che verrà richiesta la prima\n"
"volta che vi connetterete al sistema.\n"
"\n"
"In modalità Esperto vi verrà chiesto se il vostro computer è connesso ad un\n"
"server di autenticazione, secondo il protocollo NIS, LDAP o PDC.\n"
"\n"
"Se la vostra rete si basa sul protocollo LDAP, NIS o PDC per\n"
"l'autenticazione, selezionate il pulsante appropriato per effettuare\n"
"l'autenticazione. Se non siete sicuri, chiedete al vostro amministratore di\n"
"rete.\n"
"\n"
"Se il vostro computer non è connesso ad una rete soggetta ad "
"autenticazione,\n"
"scegliete \"File locali\"."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"Scegliere la porta appropriata. La porta \"COM1\" sotto Windows, ad\n"
"esempio, è chiamata \"ttyS0\" sotto GNU/Linux."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the provided list.\n"
"\n"
"If you choose a mouse other than the default, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and to\n"
"go back to the list of choices.\n"
"\n"
"Wheel mice are occasionally not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
"the buttons and check that the mouse pointer moves on-screen as you move\n"
"your mouse."
msgstr ""
"In genere DrakX individua automaticamente il numero di pulsanti presente\n"
"sul vostro mouse, in caso contrario conclude che il vostro mouse è un mouse\n"
"a due tasti e lo imposta in modo da emulare il terzo tasto. DrakX, inoltre,\n"
"riconosce automaticamente se si tratta di un mouse PS/2, seriale o USB.\n"
"\n"
"Se volete specificare un diverso tipo di mouse, scegliete il vostro modello\n"
"dall'elenco che vi viene proposto.\n"
"\n"
"Se scegliete un mouse diverso dal tipo predefinito, vi verrà mostrata una\n"
"finestra dove potrete provarlo. Provate sia i pulsanti che l'eventuale\n"
"rotellina per controllare che la configurazione sia corretta. Se il mouse\n"
"non funziona correttamente, premete la barra spaziatrice o il tasto [Invio]\n"
"per premere il pulsante \"Annulla\" ed effettuare una nuova scelta.\n"
"\n"
"Talvolta i mouse con rotellina centrale potrebbero non essere individuati\n"
"automaticamente. In tal caso, dovrete selezionarli personalmente usando la\n"
"lista. Assicuratevi di indicare correttamente la porta alla quale il mouse\n"
"è collegato. Premete il pulsante \"OK\", e comparirà l'immagine di un\n"
"mouse. Fate scorrere la rotellina per attivarla correttamente, quindi\n"
"provate i pulsanti e spostate il mouse in modo da accertarvi che tutto sia\n"
"a posto."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Your choice of preferred language will affect the language of the\n"
"documentation, the installer and the system in general. Select first the\n"
"region you are located in, and then the language you speak.\n"
"\n"
"Clicking on the \"Advanced\" button will allow you to select other\n"
"languages to be installed on your workstation, thereby installing the\n"
"language-specific files for system documentation and applications. For\n"
"example, if you will host users from Spain on your machine, select English\n"
"as the default language in the tree view and \"Espanol\" in the Advanced\n"
"section.\n"
"\n"
"Note that you're not limited to choosing a single additional language. Once\n"
"you have selected additional locales, click the \"Next ->\" button to\n"
"continue.\n"
"\n"
"To switch between the various languages installed on the system, you can\n"
"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
"language used by the entire system. Running the command as a regular user\n"
"will only change the language settings for that particular user."
msgstr ""
"Il primo passo è scegliere la lingua che preferite.\n"
"\n"
"Scegliete la lingua che intendete usare per l'installazione e l'uso del\n"
"sistema.\n"
"\n"
"Cliccando sul pulsante \"Avanzato\" potrete scegliere altre lingue da\n"
"installare sul vostro computer. La selezione di altre lingue comporta\n"
"l'installazione dei file relativi alla documentazione e alle applicazioni\n"
"per ciascuna di esse. Se il vostro computer dovrà essere usato, ad esempio,\n"
"anche da persone di madre lingua spagnola, potete scegliere l'italiano come\n"
"lingua principale nella struttura ad albero e, nella sezione \"Avanzato\",\n"
"apporre un segno di spunta sul pulsante grigio corrispondente a\n"
"\"Spanish|Spain\".\n"
"\n"
"È possibile installare i file per più lingue allo stesso tempo. Dopo aver\n"
"scelto quelle che preferite cliccate sul pulsante \"Ok\" per continuare."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Depending on the default language you chose in Section , DrakX will\n"
"automatically select a particular type of keyboard configuration. However,\n"
"you might not have a keyboard that corresponds exactly to your language:\n"
"for example, if you are an English speaking Swiss person, you may have a\n"
"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
"find yourself in the same situation where your native language and keyboard\n"
"do not match. In either case, this installation step will allow you to\n"
"select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"More \" button to be presented with the complete list of\n"
"supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding that will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
"Normalmente DrakX provvede ad individuare automaticamente la tastiera\n"
"corretta (in base alla lingua che avete scelto). Tuttavia, potreste avere\n"
"una tastiera che non corrisponde esattamente alla vostra lingua: se siete\n"
"un francese che parla italiano, ad esempio, potreste comunque preferire una\n"
"tastiera francese. Oppure, se parlate italiano ma vivete nel Québec,\n"
"potreste trovarvi nella stessa situazione. In entrambi i casi, dovrete\n"
"tornare a questa fase dell'installazione e selezionare una tastiera\n"
"appropriata dalla lista.\n"
"\n"
"Cliccate sul pulsante \"Avanzato\" per vedere una lista completa delle\n"
"tastiere supportate.\n"
"\n"
"Se scegliete una mappa di tastiera basata su di un alfabeto non latino,\n"
"nella prossima finestra di dialogo vi verrà chiesto di scegliere una\n"
"scorciatoia da tastiera che vi permetterà di passare dalla mappa latina a\n"
"quella non latina e viceversa."

#: ../../help.pm:1
#, c-format
msgid ""
"This step is activated only if an old GNU/Linux partition has been found on\n"
"your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new install or an upgrade\n"
"of an existing Mandrake Linux system:\n"
"\n"
" * \"Install\": For the most part, this completely wipes out the old\n"
"system. If you wish to change how your hard drives are partitioned, or\n"
"change the file system, you should use this option. However, depending on\n"
"your partitioning scheme, you can prevent some of your existing data from\n"
"being over- written.\n"
"\n"
" * \"Upgrade\": this installation class allows you to update the packages\n"
"currently installed on your Mandrake Linux system. Your current\n"
"partitioning scheme and user data is not altered. Most of other\n"
"configuration steps remain available, similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""

#: ../../help.pm:1
#, c-format
msgid ""
"\"Country\": check the current country selection. If you are not in this\n"
"country, click on the button and choose another one."
msgstr ""

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one you want to resize in order to install your new\n"
"Mandrake Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
"Sul vostro disco rigido è stata individuata più di una partizione Microsoft\n"
"Windows. Per favore, scegliete quella che deve essere ridimensionata in\n"
"modo da poter installare il vostro nuovo sistema operativo Mandrake Linux.\n"
"\n"
"Ogni partizione viene elencata come segue: \"nome Linux\", \"nome Windows\"\n"
"\"Capacità\".\n"
"\n"
"Il \"nome Linux\" è strutturato in: \"tipo di disco rigido\", \"numero del\n"
"disco\", \"numero della partizione\" (ad esempio, \"hda1\").\n"
"\n"
"Il \"tipo di disco rigido\" è \"hd\" se il vostro disco è di tipo IDE, e\n"
"\"sd\" se, invece, è un disco SCSI.\n"
"\n"
"Il \"numero del disco\" è sempre una lettera che segue \"hd\" o \"sd\". Per\n"
"i dischi IDE:\n"
"\n"
" * \"a\" significa \"disco rigido master sul controller IDE primario\",\n"
"\n"
" * \"b\" significa \"disco rigido slave sul controller IDE primario\";\n"
"\n"
" * \"c\" significa \"disco rigido master sul controller IDE secondario\";\n"
"\n"
" * \"d\" significa \"disco rigido slave sul controller IDE secondario\".\n"
"\n"
"Per i dischi rigidi di tipo SCSI, invece, una \"a\" significa \"ID SCSI\n"
"più\", una \"b\" significa \"ID SCSI superiore ad a\", ecc.\n"
"\n"
"Il \"nome Windows\" è la lettera che corrisponde al vostro disco rigido\n"
"sotto Windows (il primo disco o partizione è chiamato \"C:\")."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandrake Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or from another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"Clear all\": this option deletes all partitions on the selected hard\n"
"drive\n"
"\n"
" * \"Auto allocate\": this option enables you to automatically create ext3\n"
"and swap partitions in free space of your hard drive\n"
"\n"
"\"More\": gives access to additional features:\n"
"\n"
" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
"for later partition-table recovery, if necessary. It is strongly\n"
"recommended that you perform this step.\n"
"\n"
" * \"Restore partition table\": allows you to restore a previously saved\n"
"partition table from a floppy disk.\n"
"\n"
" * \"Rescue partition table\": if your partition table is damaged, you can\n"
"try to recover it using this option. Please be careful and remember that it\n"
"doesn't always work.\n"
"\n"
" * \"Reload partition table\": discards all changes and reloads the\n"
"partition table that was originally on the hard drive.\n"
"\n"
" * \"Removable media automounting\": unchecking this option will force\n"
"users to manually mount and unmount removable medias such as floppies and\n"
"CD-ROMs.\n"
"\n"
" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
"your hard drive. This is recommended if you do not have a good\n"
"understanding of partitioning.\n"
"\n"
" * \"Undo\": use this option to cancel your changes.\n"
"\n"
" * \"Toggle to normal/expert mode\": allows additional actions on\n"
"partitions (type, options, format) and gives more information about the\n"
"hard drive.\n"
"\n"
" * \"Done\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"A questo punto, dovete decidere quali partizioni devono essere usate per\n"
"l'installazione del vostro sistema Mandrake Linux. Se sono già state\n"
"definite delle partizioni, grazie ad una precedente installazione di\n"
"GNU/Linux o usando un altro programma di partizionamento, potete utilizzare\n"
"le partizioni esistenti. In caso contrario, sarà necessario creare o\n"
"modificare le partizioni del disco rigido.\n"
"\n"
"Per creare delle partizioni dovete, per prima cosa, selezionare un disco\n"
"rigido. Potete scegliere il disco da partizionare cliccando su \"hda\" per\n"
"il primo disco IDE, \"hdb\" per il secondo, \"sda\" per il primo disco\n"
"SCSI, e così via.\n"
"\n"
"Per partizionare il disco selezionato potete scegliere fra queste opzioni:\n"
"\n"
" * \"Cancella tutto\": questa opzione cancella tutte le partizioni presenti\n"
"sul disco selezionato.\n"
"\n"
" * \"Alloca automaticamente\": questa opzione vi permette di creare\n"
"automaticamente partizioni di sistema e di swap, usando il filesystem\n"
"\"Ext3\", nello spazio libero presente sul vostro disco rigido.\n"
"\n"
" * \"Ancora\": permette di accedere a funzionalità avanzate:\n"
"\n"
"    * \"Salva tabella delle partizioni\": salva la tabella delle partizioni\n"
"su un floppy. Utile per recuperarla in un momento successivo, se\n"
"necessario. Vi raccomandiamo caldamente di effettuare questa operazione.\n"
"\n"
"    * \"Ripristina tabella delle partizioni\": permette di ripristinare una\n"
"tabella delle partizioni precedentemente salvata su floppy disk.\n"
"\n"
"    * \"Recupera tabella delle partizioni\": se la vostra tabella delle\n"
"partizioni è danneggiata potete provare a recuperarla grazie a questa\n"
"opzione. Procedete con attenzione, e ricordate che potrebbe non avere\n"
"successo.\n"
"\n"
"    * \"Ricarica tabella delle partizioni\": annulla tutte le modifiche e\n"
"ricarica la tabella delle partizioni originaria.\n"
"\n"
"    * \"Removable media automounting\": se disabilitate questa opzione gli\n"
"utenti saranno costretti a montare e smontare manualmente i dispositivi\n"
"rimovibili come lettori floppy e CD-ROM.\n"
"\n"
" * \"Assistente\": usate questa opzione se desiderate che il\n"
"partizionamento del disco sia effettuato con l'aiuto di un assistente.\n"
"Altamente raccomandata se non avete una buona conoscenza del\n"
"partizionamento.\n"
"\n"
" * \"Un passo indietro\": con questa opzione le modifiche apportate\n"
"verranno annullate.\n"
"\n"
" * \"Passa a modo Esperto\": permette di effettuare ulteriori azioni sulle\n"
"partizioni (tipo, opzioni, formattazione) e offre più informazioni.\n"
"\n"
" * \"Fatto\": quando avrete finito il partizionamento del disco cliccate su\n"
"questa opzione, le vostre modifiche verranno salvate sul disco.\n"
"\n"
"Si noti che è possibile raggiungere ogni opzione usando la tastiera. Per\n"
"spostarvi fra le partizioni usate i tasti [Tab] e le frecce [Su/Giù].\n"
"\n"
"Dopo aver selezionato una partizione potete usare:\n"
"\n"
" * Ctrl-c per creare una nuova partizione (se avete selezionato una\n"
"partizione vuota);\n"
"\n"
" * Ctrl-d per cancellare una partizione;\n"
"\n"
" * Ctrl-m per impostare il punto di mount.\n"
"\n"
"Per ottenere informazioni in merito ai diversi tipi di filesystem\n"
"disponibili, consultate il capitolo ext2FS del \"Reference Manual\".\n"
"\n"
"Se state effettuando l'installazione su una macchina PPC, sarà necessario\n"
"creare una piccola partizione HFS di almeno 11MB, che verrà utilizzata dal\n"
"bootloader yaboot. Se decidete di creare una partizione più grande, diciamo\n"
"sui 50MB, potrebbe rappresentare un utile deposito dove conservare un\n"
"kernel di riserva e immagini di \"ramdisk\" da utilizzare in caso di\n"
"emergenza."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level desired\n"
"for the machine. As a rule of thumb, the security level should be set\n"
"higher if the machine will contain crucial data, or if it will be a machine\n"
"directly exposed to the Internet. The trade-off of a higher security level\n"
"is generally obtained at the expense of ease of use. Refer to the \"msec\"\n"
"chapter of the ``Command Line Manual'' to get more information about the\n"
"meaning of these levels.\n"
"\n"
"If you do not know what to choose, keep the default option."
msgstr ""
"Ora è il momento di scegliere il livello di sicurezza desiderato per il\n"
"vostro sistema. Come regola generale, quanto più esposta è la macchina e\n"
"quanto più sono importanti i dati che contiene, tanto più alto dovrebbe\n"
"essere il livello di sicurezza. Tenete presente, tuttavia, che un livello\n"
"di sicurezza molto alto in genere viene ottenuto a spese della facilità\n"
"d'uso. Consultate il capitolo MSEC nel \"Manuale di riferimento\" per avere\n"
"ulteriori informazioni in merito al significato di tali livelli.\n"
"\n"
"Se non sapete cosa scegliere, mantenete l'opzione predefinita."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"At the time you are installing Mandrake Linux, it is likely that some\n"
"packages have been updated since the initial release. Bugs may have been\n"
"fixed, security issues resolved. To allow you to benefit from these\n"
"updates, you are now able to download them from the Internet. Choose\n"
"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
"to install updated packages later.\n"
"\n"
"Choosing \"Yes\" displays a list of places from which updates can be\n"
"retrieved. Choose the one nearest you. A package-selection tree will\n"
"appear: review the selection, and press \"Install\" to retrieve and install\n"
"the selected package( s), or \"Cancel\" to abort."
msgstr ""
"È molto probabile che, al momento in cui state installando Mandrake Linux,\n"
"alcuni pacchetti siano stati aggiornati rispetto alla versione iniziale.\n"
"Potrebbe trattarsi di un \"bug fix\", o della soluzione ai problemi\n"
"relativi alla sicurezza. Per permettervi di beneficiare di questi\n"
"aggiornamenti vi verrà proposto di scaricare la nuova versione dei\n"
"pacchetti usando Internet. Scegliete \"Sì\" se potete contare su una\n"
"connessione ad Internet funzionante, oppure \"No\" se preferite installare "
"i\n"
"pacchetti aggiornati in un secondo momento.\n"
"\n"
"Se scegliete \"Sì\" comparirà una lista di siti da cui è possibile\n"
"scaricare i pacchetti aggiornati. Selezionate quello più vicino a voi. A\n"
"questo punto comparirà una finestra di selezione pacchetti: controllate la\n"
"lista e cliccate su \"Installa\" per scaricare e installare i pacchetti, o\n"
"su \"Annulla\" per annullare l'operazione."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Any partitions that have been newly defined must be formatted for use\n"
"(formatting means creating a file system).\n"
"\n"
"At this time, you may wish to reformat some already existing partitions to\n"
"erase any data they contain. If you wish to do that, please select those\n"
"partitions as well.\n"
"\n"
"Please note that it is not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
"reformat partitions containing data that you wish to keep (typically\n"
"\"/home\").\n"
"\n"
"Please be careful when selecting partitions. After formatting, all data on\n"
"the selected partitions will be deleted and you will not be able to recover\n"
"it.\n"
"\n"
"Click on \"Next ->\" when you are ready to format partitions.\n"
"\n"
"Click on \"<- Previous\" if you want to choose another partition for your\n"
"new Mandrake Linux operating system installation.\n"
"\n"
"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
"for bad blocks on the disk."
msgstr ""
"Qualsiasi partizione appena definita deve essere formattata prima di poter\n"
"essere usata (formattare significa creare un filesystem).\n"
"\n"
"Potreste anche voler riformattare alcune partizioni preesistenti, per\n"
"cancellare i dati che contengono. Se desiderate farlo, scegliete qui le\n"
"partizioni che intendete formattare.\n"
"\n"
"Tenete presente che non è necessario riformattare tutte le partizioni\n"
"preesistenti. Dovete formattare le partizioni che contengono il sistema\n"
"operativo (come \"/\", \"/usr\" o \"/var\"), ma potete evitare di\n"
"riformattare partizioni che contengono dati che desiderate conservare\n"
"(tipicamente \"/home\").\n"
"\n"
"Fate molta attenzione nella scelta delle partizioni, dopo la formattazione\n"
"tutti i dati saranno cancellati e non potrete recuperarli.\n"
"\n"
"Cliccate su \"Ok\" quando siete pronti a formattare le partizioni.\n"
"\n"
"Cliccate su \"Annulla\" se desiderate scegliere altre partizioni sulle\n"
"quali installare il vostro nuovo sistema operativo Mandrake Linux.\n"
"\n"
"Cliccate su \"Avanzato\" se desiderate che le partizioni selezionate\n"
"vengano controllate per accertare la presenza di eventuali blocchi\n"
"danneggiati."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
"you should see after your computer has finished doing its hardware tests is\n"
"the bootloader menu, giving you the choice of which operating system to\n"
"start.\n"
"\n"
"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
"\n"
" * \"generate auto-install floppy\": to create an installation floppy disk\n"
"that will automatically perform a whole installation without the help of an\n"
"operator, similar to the installation you just configured.\n"
"\n"
"   Note that two different options are available after clicking the button:\n"
"\n"
"    * \"Replay\". This is a partially automated installation. The\n"
"partitioning step is the only interactive procedure.\n"
"\n"
"    * \"Automated\". Fully automated installation: the hard disk is\n"
"completely rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing a number of similar machines.\n"
"See the Auto install section on our web site for more information.\n"
"\n"
" * \"Save packages selection\"(*): saves a list of the package selected in\n"
"this installation. To use this selection with another installation, insert\n"
"the floppy and start the installation. At the prompt, press the [F1] key\n"
"and type >>linux defcfg=\"floppy\" <<.\n"
"\n"
"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
"\"mformat a:\")"
msgstr ""
"Ecco fatto: l'installazione è terminata, e il vostro sistema GNU/Linux è\n"
"pronto per essere usato. Dovete soltanto cliccare sul pulsante \"OK\" per\n"
"riavviare il sistema. Potete lanciare GNU/Linux o Windows (se presente),\n"
"qualunque preferiate dei due, non appena il computer avrà terminato di\n"
"effettuare il boot.\n"
"\n"
"Cliccando sul pulsante \"Avanzato\" (solo in modalità Esperto) avrete altri\n"
"due pulsanti a vostra disposizione:\n"
"\n"
" * \"Crea il floppy di installazione automatica\": per creare un floppy di\n"
"installazione che permette di eseguire automaticamente un' installazione\n"
"completa, del tutto simile a quella che avete appena finito di configurare,\n"
"senza che sia necessario l'intervento di un operatore.\n"
"\n"
"   Notate che, dopo aver cliccato sul pulsante, saranno disponibili due\n"
"opzioni diverse:\n"
"\n"
"    * \"Ripeti\": questa è un'installazione automatizzata solo in parte, in\n"
"quanto la fase di partizionamento del disco (e solo quella) resta\n"
"interattiva.\n"
"\n"
"    * \"Automatizzata\": l'installazione è completamente automatizzata: il\n"
"disco rigido viene riscritto per intero, tutti tutti i dati che contiene\n"
"andranno persi.\n"
"\n"
"   Questa caratteristica è molto utile quando si deve installare il sistema\n"
"su un gran numero di macchine dalle caratteristiche simili. Si veda la\n"
"sezione Installazione automatica sul nostro sito web.\n"
"\n"
" * \"Salva scelta pacchetti\" (*): salva la selezione dei pacchetti\n"
"effettuata in precedenza. Al momento di effettuare un'altra installazione,\n"
"potrete inserire il dischetto nel lettore e installare il sistema\n"
"richiamando lo schermo di aiuto (premendo [F1]) e digitando >>linux\n"
"defcfg=\"floppy\"<<.\n"
"\n"
"(*) Sarà necessario un dischetto formattato con il filesystem FAT: per\n"
"formattarne uno sotto GNU/Linux digitate \"mformat a:\""

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"At this point, you need to decide where you want to install the Mandrake\n"
"Linux operating system on your hard drive. If your hard drive is empty or\n"
"if an existing operating system is using all the available space you will\n"
"have to partition the drive. Basically, partitioning a hard drive consists\n"
"of logically dividing it to create the space needed to install your new\n"
"Mandrake Linux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to lost data if there is an existing operating system already\n"
"installed on the drive, partitioning can be intimidating and stressful if\n"
"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
" * \"Use free space\": this option will perform an automatic partitioning\n"
"of your blank drive(s). If you use this option there will be no further\n"
"prompts.\n"
"\n"
" * \"Use existing partition\": the wizard has detected one or more existing\n"
"Linux partitions on your hard drive. If you want to use them, choose this\n"
"option. You will then be asked to choose the mount points associated with\n"
"each of the partitions. The legacy mount points are selected by default,\n"
"and for the most part it's a good idea to keep them.\n"
"\n"
" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
"installed on your hard drive and takes all the space available on it, you\n"
"have to create free space for Linux data. To do so, you can delete your\n"
"Microsoft Windows partition and data (see `` Erase entire disk'' solution)\n"
"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
"without the loss of any data, provided you previously defragment the\n"
"Windows partition and that it uses the FAT format. Backing up your data is\n"
"strongly recommended.. Using this option is recommended if you want to use\n"
"both Mandrake Linux and Microsoft Windows on the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
"present on your hard drive and replace them with your new Mandrake Linux\n"
"system, choose this option. Be careful, because you will not be able to\n"
"undo your choice after you confirm.\n"
"\n"
"   !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"Remove Windows\": this will simply erase everything on the drive and\n"
"begin fresh, partitioning everything from scratch. All data on your disk\n"
"will be lost.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"Custom disk partitionning\": choose this option if you want to\n"
"manually partition your hard drive. Be careful -- it is a powerful but\n"
"dangerous choice and you can very easily lose all your data. That's why\n"
"this option is really only recommended if you have done something like this\n"
"before and have some experience. For more instructions on how to use the\n"
"DiskDrake utility, refer to the ``Managing Your Partitions '' section in\n"
"the ``Starter Guide''."
msgstr ""
"A questo punto dovete scegliere dove installare il vostro sistema operativo\n"
"Mandrake Linux sul disco rigido. Se il vostro disco è vuoto, oppure se un\n"
"sistema operativo esistente sta usando tutto lo spazio disponibile, allora\n"
"dovrete partizionarlo. In breve, partizionare un disco rigido consiste nel\n"
"suddividerlo logicamente in maniera da creare lo spazio sufficiente per\n"
"installare il vostro nuovo sistema operativo Mandrake Linux.\n"
"\n"
"Dato che gli effetti del partizionamento sono di solito irreversibili,\n"
"questa operazione può intimidire e rivelarsi stressante per un utente\n"
"inesperto. Fortunatamente, avete a vostra disposizione un assistente che\n"
"semplifica questo passo. Prima di iniziare leggete attentamente il manuale,\n"
"e prendete tutto il tempo che vi serve.\n"
"\n"
"Se state effettuando l'installazione in modalità Esperto, verrà lanciato\n"
"DiskDrake, il programma di gestione e partizionamento dei dischi rigidi di\n"
"Mandrake Linux, che vi permetterà di configurare accuratamente le vostre\n"
"partizioni. Consultate il capitolo relativo a DiskDrake nel manuale. Dal\n"
"programma di installazione potete richiamare gli assistenti descritti qui\n"
"di seguito cliccando sul pulsante \"Assistente\" (ingl. \"Wizard\").\n"
"\n"
"Se le partizioni sono già state definite (per una precedente installazione,\n"
"o da un'altra utilità di partizionamento), dovrete solo scegliere quelle da\n"
"usare per installare il vostro sistema Linux.\n"
"\n"
"Se le partizioni non sono ancora state definite, dovete crearle usando\n"
"l'assistente. In base alla configurazione del vostro disco rigido, saranno\n"
"disponibili diverse soluzioni:\n"
"\n"
" * \"Usa spazio disponibile\": questa opzione causerà un partizionamento\n"
"automatico del vostro disco rigido (o dischi, se ne avete più di uno). Non\n"
"vi verrà posta nessun'altra domanda.\n"
"\n"
" * \"Usa partizioni esistenti\": l'assistente ha trovato una o più\n"
"partizioni Linux sul vostro disco rigido. Se desiderate usarle scegliete\n"
"questa opzione. Vi verrà chiesto di scegliere il punto di mount associato a\n"
"ciascuna partizione. Come opzione predefinita verranno mantenuti i punti di\n"
"mount precedenti e, in genere, è buona norma non modificarli.\n"
"\n"
" * \"Usa lo spazio libero nella partizione Windows\": se Microsoft Windows\n"
"è installato sul vostro disco rigido e occupa tutto lo spazio disponibile,\n"
"dovrete creare spazio libero per i dati relativi a Linux. Per farlo potete\n"
"cancellare la vostra partizione Microsoft Windows e i dati che contiene\n"
"(usando le soluzioni \"Cancella l'intero disco\" o \"Modo Esperto\"),\n"
"oppure ridimensionarla. Il ridimensionamento può essere effettuato evitando\n"
"la perdita di dati a patto che prima di procedere la partizione Windows sia\n"
"stata deframmentata. Vi raccomandiamo anche di fare un backup dei vostri\n"
"dati. Questa è la soluzione consigliata se desiderate usare sia Mandrake\n"
"Linux sia Microsoft Windows sullo stesso computer.\n"
"\n"
"   Prima di scegliere questa opzione, tenete presente che la dimensione\n"
"della partizione su cui risiede Microsoft Windows sarà ridotta rispetto a\n"
"quella attuale. Significa che avrete meno spazio libero per archiviare i\n"
"vostri dati o installare nuovo software su Windows.\n"
"\n"
" * \"Cancella l'intero disco\": se desiderate cancellare tutti i dati e\n"
"tutte le partizioni presenti sul vostro disco rigido e rimpiazzarli con il\n"
"vostro nuovo sistema Mandrake Linux, potete selezionare questa opzione.\n"
"Fate attenzione nello scegliere questa soluzione, dopo la conferma non\n"
"potrete più tornare indietro.\n"
"\n"
"   !! Se scegliete questa opzione, tutti i dati sul vostro disco andranno\n"
"persi. !!\n"
"\n"
" * \"Cancella Windows\": l'effetto di questa opzione sarà di cancellare\n"
"tutto quello che si trova sul disco e di ricominciare da capo, creando le\n"
"partizioni su un disco vuoto. Tutti i dati presenti sul vostro disco\n"
"andranno persi.\n"
"\n"
"   !! Se scegliete questa opzione, tutti i dati sul vostro disco andranno\n"
"persi. !!\n"
"\n"
" * \"Modo Esperto\": se volete partizionare manualmente il vostro disco\n"
"rigido potete scegliere questa opzione. Fate attenzione prima di optare per\n"
"questa soluzione: è potente, ma molto pericolosa. Potreste facilmente\n"
"causare la perdita di tutti i vostri dati. Quindi, non scegliete questa\n"
"soluzione se non sapete cosa state facendo. Per ulteriori informazioni\n"
"riguardo il funzionamento di DiskDrake, il programma utilizzato a questo\n"
"punto, consultate la sezione \"Managing Your Partitions\" della \"User\n"
"Guide\""

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
"handy.\n"
"\n"
"The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
"booting the CD-ROM, pressing the >> F1<< key at boot and typing >>rescue<<\n"
"at the prompt. If your computer cannot boot from the CD-ROM, there are at\n"
"least two situations where having a boot floppy is critical:\n"
"\n"
" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
"of your main disk (unless you are using another boot manager), to allow you\n"
"to start up with either Windows or GNU/Linux (assuming you have Windows on\n"
"your system). If at some point you need to reinstall Windows, the Microsoft\n"
"install process will rewrite the boot sector and remove your ability to\n"
"start GNU/Linux!\n"
"\n"
" * if a problem arises and you cannot start GNU/Linux from the hard disk,\n"
"this floppy will be the only means of starting up GNU/Linux. It contains a\n"
"fair number of system tools for restoring a system that has crashed due to\n"
"a power failure, an unfortunate typing error, a forgotten root password, or\n"
"any other reason.\n"
"\n"
"If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
"floppy disk must be blank or have non-critical data on it - DrakX will\n"
"format the floppy and will rewrite the whole disk."
msgstr ""
"Il CD-ROM di Mandrake Linux ha una modalità \"salvataggio\" preconfigurata.\n"
"Potete accedervi effettuando il boot dal CD-ROM, premendo il tasto >>F1<<\n"
"all'avvio e digitando >>rescue<< dal prompt. Ma se il vostro computer non\n"
"può essere avviato dal CD-ROM, dovete effettuare questa operazione (la\n"
"creazione di un disco di avvio) per almeno due ragioni:\n"
"\n"
" * quando il bootloader verrà installato, DrakX riscriverà il settore di\n"
"boot (MBR) del vostro disco principale (a meno che voi non usiate un altro\n"
"gestore del boot), in modo che possiate avviare sia Windows che GNU/Linux,\n"
"se sul vostro sistema è installato anche Windows. Tuttavia, se in futuro si\n"
"renderà necessario re-installare Windows, il programma di installazione\n"
"Microsoft riscriverà il settore di boot, e di conseguenza non sarete più in\n"
"grado di avviare GNU/Linux!\n"
"\n"
" * se si verifica un problema per cui non potete più lanciare GNU/Linux dal\n"
"disco rigido, questo dischetto sarà l'unico mezzo per avviare GNU/Linux:\n"
"contiene un buon numero di programmi di amministrazione del sistema per\n"
"rimettere in sesto un'installazione che ha subito un crash per\n"
"un'interruzione di corrente, uno sfortunato errore di battitura, una\n"
"password dimenticata o qualsiasi altra ragione.\n"
"\n"
"Quando cliccherete su \"Sì\", vi verrà chiesto di inserire un disco in un\n"
"lettore di floppy. Naturalmente il dischetto che utilizzerete deve essere\n"
"vuoto o contenere soltanto dati di cui non avete più bisogno. Non sarà\n"
"necessario formattarlo: DrakX riscriverà l'intero disco."

#: ../../help.pm:1
#, c-format
msgid ""
"Finally, you will be asked whether you want to see the graphical interface\n"
"at boot. Note this question will be asked even if you chose not to test the\n"
"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
"act as a server, or if you were not successful in getting the display\n"
"configured."
msgstr ""
"Infine, DrakX chiederà se si desidera che appaia l'interfaccia grafica\n"
"dopo l'avvio del sistema. È da notare che questa domanda\n"
"verrà fatta anche si è deciso di non provare la configurazione.\n"
"Ovviamente, è opportuno scegliere \"No\" se la  macchina dovrà funzionare\n"
"da server, o se non si è riusciti a configurare la grafica."

#: ../../help.pm:1
#, c-format
msgid ""
"In the case that different servers are available for your card, with or\n"
"without 3D acceleration, you are then proposed to choose the server that\n"
"best suits your needs."
msgstr ""

#: ../../help.pm:1
#, c-format
msgid ""
"Resolution\n"
"\n"
"   You can choose here resolutions and color depth between those available\n"
"for your hardware. Choose the one that best suit your needs (you will be\n"
"able to change that after installation though). A sample of the chosen\n"
"configuration is shown in the monitor."
msgstr ""

#: ../../help.pm:1
#, c-format
msgid ""
"Monitor\n"
"\n"
"   The installer can normally automatically detect and configure the\n"
"monitor connected to your machine. If it is not the case, you can choose in\n"
"this list the monitor you actually own."
msgstr ""

#: ../../help.pm:1
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
"You will be presented the list of different parameters to change to get an\n"
"optimal graphical display: Graphic Card\n"
"\n"
"   The installer can normally automatically detect and configure the\n"
"graphic card installed on your machine. If it is not the case, you can\n"
"choose in this list the card you actually own.\n"
"\n"
"   In the case that different servers are available for your card, with or\n"
"without 3D acceleration, you are then proposed to choose the server that\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   The installer can normally automatically detect and configure the\n"
"monitor connected to your machine. If it is not the case, you can choose in\n"
"this list the monitor you actually own.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
"   You can choose here resolutions and color depth between those available\n"
"for your hardware. Choose the one that best suit your needs (you will be\n"
"able to change that after installation though). A sample of the chosen\n"
"configuration is shown in the monitor.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   the system will try to open a graphical screen at the desired\n"
"resolution. If you can see the message during the test and answer \"Yes\",\n"
"then DrakX will proceed to the next step. If you cannot see the message, it\n"
"means that some part of the autodetected configuration was incorrect and\n"
"the test will automatically end after 12 seconds, bringing you back to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
"   You can here choose whether you want to have your machine automatically\n"
"switch to a graphical interface at boot. Obviously, you want to check\n"
"\"No\" if your machine is to act as a server, or if you were not successful\n"
"in getting the display configured."
msgstr ""

#: ../../help.pm:1
#, c-format
msgid ""
"Graphic Card\n"
"\n"
"   The installer can normally automatically detect and configure the\n"
"graphic card installed on your machine. If it is not the case, you can\n"
"choose in this list the card you actually own.\n"
"\n"
"   In the case that different servers are available for your card, with or\n"
"without 3D acceleration, you are then proposed to choose the server that\n"
"best suits your needs."
msgstr ""

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
"system clock and the hardware clock are in the same timezone. This is\n"
"useful when the machine also hosts another operating system like Windows.\n"
"\n"
"The \"Automatic time synchronization \" option will automatically regulate\n"
"the clock by connecting to a remote time server on the Internet. For this\n"
"feature to work, you must have a working Internet connection. It is best to\n"
"choose a time server located near you. This option actually installs a time\n"
"server that can used by other machines on your local network."
msgstr ""
"GNU/Linux gestisce il tempo in base al GMT (\"Greenwich Manage Time\") e lo\n"
"traduce nell'ora locale in base al fuso orario selezionato. Tuttavia è\n"
"possibile disabilitare questa opzione togliendo il segno di spunta alla\n"
"casella \"Hardware clock set to GMT\", in modo che l'orologio hardware sia\n"
"lo stesso dell'orologio di sistema. Questa scelta può tornare utile nel\n"
"caso sulla macchina sia installato un altro sistema operativo, ad esempio\n"
"Windows.\n"
"\n"
"L'opzione \"Automatic time synchronization\" provvederà a gestire l'ora\n"
"grazie alla connessione con un server del tempo remoto via Internet.\n"
"Scegliete un server vicino a voi nella lista che vi verrà mostrata. Perché\n"
"questa opzione funzioni, naturalmente, dovete disporre di una connessione a\n"
"Internet funzionante. Sulla vostra macchina verrà installato un server del\n"
"tempo che potrà essere usato anche per altre macchine che si trovano sulla\n"
"vostra rete locale."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"This step is used to choose which services you wish to start at boot time.\n"
"\n"
"DrakX will list all the services available on the current installation.\n"
"Review each one carefully and uncheck those which are not always needed at\n"
"boot time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you are not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you will probably not want to start any services that you do not\n"
"need. Please remember that several services can be dangerous if they are\n"
"enabled on a server. In general, select only the services you really need.\n"
"!!"
msgstr ""
"A questo punto potete scegliere i servizi da lanciare automaticamente\n"
"all'avvio del sistema.\n"
"\n"
"Qui sono elencati tutti i servizi disponibili con l'installazione attuale.\n"
"Esaminateli attentamente e disabilitate quelli che non sono sempre\n"
"necessari all'avvio.\n"
"\n"
"Selezionando un servizio comparirà un breve testo di aiuto che ne spiega le\n"
"caratteristiche. Se non siete realmente sicuri dell'utilità o meno di un\n"
"servizio, è più prudente non modificare le impostazioni predefinite.\n"
"\n"
"!! In questa fase dell'installazione dovete fare le vostre scelte con\n"
"particolare attenzione nel caso intendiate usare il vostro computer come\n"
"server: probabilmente non volete che siano abilitati servizi di cui non\n"
"avete bisogno. Ricordate che numerosi servizi sono potenzialmente\n"
"pericolosi se attivi su un server. Come regola generale, selezionate\n"
"soltanto quelli di cui avete effettivamente bisogno. !!"

#: ../../help.pm:1
#, c-format
msgid ""
"\"Printer\": clicking on the \"No Printer\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to setup a new printer. The interface\n"
"presented there is similar to the one used during installation."
msgstr ""

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
"connect your computer to the Internet or to a local network, click \"Next\n"
"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
"also choose not to configure the network, or to do it later, in which case\n"
"clicking the \"Cancel\" button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
"simple LAN connection (Ethernet).\n"
"\n"
"We will not detail each configuration option - just make sure that you have\n"
"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
"from your Internet Service Provider or system administrator.\n"
"\n"
"You can consult the ``Starter Guide'' chapter about Internet connections\n"
"for details about the configuration, or simply wait until your system is\n"
"installed and use the program described there to configure your connection."
msgstr ""
"Se desiderate connettere il vostro computer ad Internet o ad una rete "
"locale,\n"
"assicuratevi di scegliere l'opzione corretta. Accendete la periferica che\n"
"dovrete usare per connettervi prima di scegliere l'opzione adeguata, per\n"
"permettere a DrakX di individuarla automaticamente.\n"
"\n"
"Mandrake Linux vi permette di configurare la vostra connessione ad Internet\n"
"durante il processo di installazione. Le connessioni disponibili sono:\n"
"modem tradizionale, modem ISDN, connessione ADSL, cable modem, e infine una\n"
"semplice connessione ad una LAN (Ethernet).\n"
"\n"
"Non possiamo descrivere in dettaglio le caratteristiche di ogni\n"
"configurazione. In ogni caso, accertatevi di avere a portata di mano tutti\n"
"i parametri indicati dal vostro fornitore di servizi internet o dal vostro\n"
"amministratore di sistema.\n"
"\n"
"Per maggiori dettagli riguardo la configurazione della connessione a\n"
"Internet potete consultare il relativo capitolo del \"User Guide\"; in\n"
"alternativa, potete attendere di aver portato a termine l'installazione e\n"
"usare poi il programma descritto in tale capitolo per configurare la\n"
"connessione.\n"
"\n"
"Se desiderate configurare la rete dopo aver terminato l'installazione, o se\n"
"avete già configurato la vostra rete, cliccate su \"Annulla\"."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"If you told the installer that you wanted to individually select packages,\n"
"it will present a tree containing all packages classified by groups and\n"
"subgroups. While browsing the tree, you can select entire groups,\n"
"subgroups, or individual packages.\n"
"\n"
"Whenever you select a package on the tree, a description appears on the\n"
"right to let you know the purpose of the package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you will be asked to confirm that you really want those servers to be\n"
"installed. By default Mandrake Linux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that that\n"
"security holes are discovered after this version of Mandrake Linux was\n"
"finalized. If you do not know what a particular service is supposed to do\n"
"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
"install the listed services and they will be started automatically by\n"
"default during boot. !!\n"
"\n"
"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
"which appears whenever the installer automatically selects a package to\n"
"resolve a dependency issue. Some packages have relationships between each\n"
"other such that installation of a package requires that some other program\n"
"is already installed. The installer can determine which packages are\n"
"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert a floppy disk previously created at the\n"
"end of another installation. See the second tip of last step on how to\n"
"create such a floppy."
msgstr ""
"Ora, se avete scelto di indicare i pacchetti su base individuale, potete\n"
"vedere una struttura ad albero contenente tutti i pacchetti organizzati in\n"
"gruppi e sotto-gruppi. Mentre sfogliate questa lista gerarchica potete\n"
"selezionare interi gruppi, sotto-gruppi o singoli pacchetti.\n"
"\n"
"Quando selezionate un pacchetto all'interno dell'albero, ne compare una\n"
"descrizione sulla destra. Una volta terminata la scelta, cliccate sul\n"
"pulsante \"Installa\" che provvederà a far partire l'installazione vera e\n"
"propria. Il tempo necessario varia in base al numero di pacchetti che\n"
"devono essere installati e alla velocità del vostro hardware, l'attesa\n"
"potrebbe anche essere lunga. Una stima del tempo richiesto per finire\n"
"l'installazione è visibile sullo schermo, in questo modo potrete sapere se\n"
"avete tempo a sufficienza per godervi una tazza di caffè.\n"
"\n"
"!! Se avete selezionato un pacchetto che offre un servizio come server\n"
"(intenzionalmente, oppure perché faceva parte di un gruppo), vi verrà\n"
"chiesta conferma riguardo una sua effettiva installazione. Come opzione\n"
"predefinita, in Mandrake Linux tutti i servizi installati vengono avviati\n"
"automaticamente al momento del boot. Anche se si tratta di servizi sicuri\n"
"al momento in cui è stata rilasciata questa versione della distribuzione,\n"
"potrebbe succedere che vengano scoperte delle falle di sicurezza in un\n"
"momento successivo. Se poi non avete proprio idea di quale sia la funzione\n"
"di uno di questi pacchetti, cliccate sul pulsante \"No\". Cliccando su\n"
"\"Sì\" i servizi elencati verranno installati e saranno attivati in maniera\n"
"automatica. !!\n"
"\n"
"L'opzione \"Mostra i pacchetti selezionati automaticamente\" vi permette di\n"
"disabilitare la finestra di dialogo che compare tutte le volte che il\n"
"programma di installazione seleziona automaticamente uno o più pacchetti.\n"
"Il programma determina in modo automatico, infatti, quali sono i pacchetti\n"
"che sono indispensabili ad un dato pacchetto (\"dipendenze\") perché\n"
"quest'ultimo possa essere installato con successo.\n"
"\n"
"Il piccolo dischetto floppy in fondo alla lista vi permette di caricare una\n"
"lista di pacchetti scelti durante una precedente installazione. Cliccando\n"
"su questa icona vi verrà chiesto di inserire un floppy che avrete creato\n"
"alla fine di un'altra installazione. Consultate le informazioni che\n"
"riguardano l'ultimo passo del processo di installazione per sapere come\n"
"creare questo dischetto."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"It is now time to specify which programs you wish to install on your\n"
"system. There are thousands of packages available for Mandrake Linux, and\n"
"to make it simpler to manage the packages have been placed into groups of\n"
"similar applications.\n"
"\n"
"Packages are sorted into groups corresponding to a particular use of your\n"
"machine. Mandrake Linux has four predefined installations available. You\n"
"can think of these installation classes as containers for various packages.\n"
"You can mix and match applications from the various containers, so a\n"
"``Workstation'' installation can still have applications from the\n"
"``Development'' container installed.\n"
"\n"
" * \"Workstation\": if you plan to use your machine as a workstation,\n"
"select one or more of the applications that are in the workstation\n"
"container.\n"
"\n"
" * \"Development\": if plan on using your machine for programming, choose\n"
"the appropriate packages from the container.\n"
"\n"
" * \"Server\": if your machine is intended to be a server, select which of\n"
"the more common services you wish to install on your machine.\n"
"\n"
" * \"Graphical Environment\": this is where you will choose your preferred\n"
"graphical environment. At least one must be selected if you want to have a\n"
"graphical interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group. If you unselect all groups when performing a regular\n"
"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
"different options for a minimal installation:\n"
"\n"
" * \"With X\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"With basic documentation\": installs the base system plus basic\n"
"utilities and their documentation. This installation is suitable for\n"
"setting up a server.\n"
"\n"
" * \"Truly minimal install\": will install the absolute minimum number of\n"
"packages necessary to get a working Linux system. With this installation\n"
"you will only have a command line interface. The total size of this\n"
"installation is 65 megabytes.\n"
"\n"
"You can check the \"Individual package selection\" box, which is useful if\n"
"you are familiar with the packages being offered or if you want to have\n"
"total control over what will be installed.\n"
"\n"
"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
"groups to avoid installing any new package. This is useful for repairing or\n"
"updating an existing system."
msgstr ""
"Adesso è il momento di indicare i programmi che volete siano installati sul\n"
"vostro sistema. Ci sono migliaia di programmi disponibili per Mandrake\n"
"Linux, e nessuno si aspetta che li conosciate tutti a memoria.\n"
"\n"
"Se state effettuando un'installazione standard da CD-ROM, per prima cosa vi\n"
"verrà chiesto di specificare quali sono i CD in vostro possesso (solo se\n"
"siete in modalità Esperto): controllate i CD della distribuzione, cliccate\n"
"sulle caselle corrispondenti ai CD che avete e infine sul pulsante \"Ok\"\n"
"quando siete pronti per continuare.\n"
"\n"
"I pacchetti sono organizzati in gruppi corrispondenti ad usi particolari\n"
"della vostra macchina. I gruppi sono a loro volta divisi in quattro\n"
"sezioni:\n"
"\n"
" * \"Workstation\": scegliete uno o più dei gruppi di questa sezione se la\n"
"vostra macchina verrà utilizzata prevalentemente come workstation.\n"
"\n"
" * \"Sviluppo\": se la macchina verrà usata per lo sviluppo di software\n"
"scegliete i gruppi appropriati.\n"
"\n"
" * \"Server\": se il computer sarà usato come server, qui potrete scegliere\n"
"i servizi più comuni da installare.\n"
"\n"
" * \"Ambiente grafico\": scegliete qui il vostro ambiente grafico\n"
"preferito. Indicatene almeno uno se desiderate avere una workstation\n"
"grafica!\n"
"\n"
"Spostando il puntatore del mouse sul nome di un gruppo verrà mostrato un\n"
"breve testo di informazioni riguardo quest'ultimo. Se state effettuando\n"
"un'installazione normale (non un aggiornamento) e deselezionate tutti i\n"
"gruppi, comparirà una finestra di dialogo che vi proporrà alcune opzioni\n"
"relative ad un'installazione \"minima\":\n"
"\n"
" * \"With X\": installa i pacchetti strettamente necessari per avere un\n"
"ambiente grafico funzionante;\n"
"\n"
" * \"With basic documentation\": installa il sistema base più le utilità di\n"
"base e la relativa documentazione; questo tipo di installazione è utile se\n"
"si vuole configurare un server;\n"
"\n"
" * \"Truly minimal install\": provvederà all'installazione dello stretto\n"
"necessario per avere un sistema Linux funzionante, avente come unica\n"
"interfaccia la linea di comando.\n"
"\n"
"Se lo desiderate, potete abilitare l'opzione \"Selezione individuale dei\n"
"pacchetti\". Questa è utilissima se conoscete bene i pacchetti presenti\n"
"nella distribuzione o se desiderate avere il totale controllo di ciò che\n"
"verrà installato.\n"
"\n"
"Se avete cominciato l'installazione in modalità \"Aggiornamento\", potete\n"
"deselezionare tutti i gruppi per evitare di installare nuovi pacchetti, in\n"
"questo modo effettuerete soltanto il ripristino o l'aggiornamento del\n"
"sistema esistente."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
"knows if a selected package is located on another CD-ROM so it will eject\n"
"the current CD and ask you to insert the correct CD as required."
msgstr ""
"La distribuzione Mandrake Linux è suddivisa su più CD-ROM. DrakX sa se uno\n"
"dei pacchetti selezionati si trova su un altro CD-ROM, pertanto provvederà\n"
"ad espellere il CD attualmente inserito nel lettore e a chiedervi di\n"
"inserire quello corretto."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, c-format
msgid ""
"Here are Listed the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"In alto potete vedere l'elenco delle partizioni Linux individuate sul\n"
"vostro disco rigido. Potete attenervi alle scelte fatte dall'assistente,\n"
"vanno bene per la maggior parte delle installazioni. Se fate dei\n"
"cambiamenti, ricordate che dovete definire per lo meno una partizione root\n"
"(\"radice\") (\"/\"). Non scegliete una partizione troppo piccola,\n"
"altrimenti non sarete in grado di installare parte del software. Se volete\n"
"archiviare i vostri dati su una partizione separata, dovrete creare anche\n"
"una partizione per \"/home\" (questo è possibile soltanto se avete a\n"
"disposizione più di una partizione Linux).\n"
"\n"
"Ogni partizione è elencata in base a queste caratteristiche: \"Nome\",\n"
"\"Capacità\".\n"
"\n"
"Il \"Nome\" è strutturato in: \"tipo di disco rigido\", \"numero del\n"
"disco\", \"numero della partizione\" (ad esempio, \"hda1\").\n"
"\n"
"Il \"tipo di disco rigido\" è \"hd\" se il vostro disco è di tipo IDE, e\n"
"\"sd\" se, invece, è un disco SCSI.\n"
"\n"
"Il \"numero del disco\" è sempre una lettera che segue \"hd\" o \"sd\". Per\n"
"i dischi IDE:\n"
"\n"
" * \"a\" significa \"disco rigido master sul controller IDE primario\";\n"
"\n"
" * \"b\" significa \"disco rigido slave sul controller IDE primario\";\n"
"\n"
" * \"c\" significa \"disco rigido master sul controller IDE secondario\";\n"
"\n"
" * \"d\" significa \"disco rigido slave sul controller IDE secondario\".\n"
"\n"
"Per i dischi rigidi di tipo SCSI, invece, una \"a\" significa \"ID SCSI\n"
"più\", una \"b\" significa \"ID SCSI superiore ad a\", ecc."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
# ../../help.pm_.c:13, fuzzy
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"GNU/Linux is a multi-user system, meaning each user can have their own\n"
"preferences, their own files and so on. You can read the ``Starter Guide''\n"
"to learn more about multi-user systems. But unlike \"root\", which is the\n"
"system administrator, the users you add at this point will not be\n"
"authorized to change anything except their own files and their own\n"
"configuration, protecting the system from unintentional or malicious\n"
"changes that impact the system as a whole. You will have to create at least\n"
"one regular user for yourself -- this is the account which you should use\n"
"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
"to do anything and everything, it may also be very dangerous! A mistake\n"
"could mean that your system would not work any more. If you make a serious\n"
"mistake as a regular user, the worst that will happen is that you will lose\n"
"some information, but not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you typed in and copy it to the \"User name\" field, which is the name this\n"
"user will enter to log onto the system. If you like, you may override the\n"
"default and change the username. The next step is to enter a password. From\n"
"a security point of view, a non-privileged (regular) user password is not\n"
"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
"making it blank or too simple: after all, your files could be the ones at\n"
"risk.\n"
"\n"
"Once you click on \"Accept user\", you can add other users. Add a user for\n"
"each one of your friends: your father or your sister, for example. Click\n"
"\"Next ->\" when you have finished adding users.\n"
"\n"
"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
"for that user (bash by default).\n"
"\n"
"When you are finished adding all users, you will be asked to choose a user\n"
"that can automatically log into the system when the computer boots up. If\n"
"you are interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click \"Next\n"
"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
"to use this feature?\" box."
msgstr ""
"GNU/Linux è un sistema operativo multiutente, e questo significa che\n"
"ciascun utente può disporre di una configurazione personalizzata, di uno\n"
"spazio per i propri file, e così via; consultate il \"Manuale dell'utente\"\n"
"per saperne di più. Ma, a differenza di \"root\", che è l'amministratore\n"
"del sistema, gli utenti che aggiungerete adesso non avranno il diritto di\n"
"cambiare nulla, se non i propri file e la propria configurazione. Dovrete\n"
"crearne almeno uno per voi stessi, e dovreste usare quello per l'uso\n"
"quotidiano: per quanto sia molto comodo entrare nel sistema come \"root\"\n"
"tutti i giorni, potrebbe anche essere molto pericoloso! Anche un errore\n"
"banale potrebbe significare un sistema non più in grado di funzionare\n"
"correttamente. Se, invece, commettete un errore, anche grave, in qualità di\n"
"utente normale, potreste perdere parte dei vostri dati, ma non\n"
"compromettere l'intero sistema.\n"
"\n"
"Prima di tutto, inserite il vostro nome reale. Naturalmente questo non è\n"
"obbligatorio: potete digitare quello che volete. Fatto questo, DrakX\n"
"prenderà la prima parola che avete inserito nel campo di testo e la copierà\n"
"alla voce \"Nome utente\". Questo è il nome che l'utente dovrà usare per\n"
"accedere al sistema, ma potete cambiarlo. Poi digitate una password per\n"
"questo utente. La password di un utente non privilegiato dal punto di vista\n"
"della sicurezza non è cruciale come quella di \"root\", ovviamente, ma non\n"
"c'è motivo di essere frettolosi: dopo tutto, si tratta dei vostri file.\n"
"\n"
"Se cliccate su \"Accetta utente\", potrete poi aggiungerne un altro, e\n"
"altri ancora, a vostra discrezione. Aggiungete un utente per ciascuno dei\n"
"vostri amici, oppure per vostro padre e vostro fratello, ad esempio. Dopo\n"
"aver aggiunto tutti gli utenti che volete, selezionate \"Fatto\".\n"
"\n"
"Cliccando sul pulsante \"Avanzato\" potrete cambiare la \"shell\" per\n"
"quell'utente (come opzione predefinita è bash)."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/it/drakx-chapter.xml
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
"computer."
msgstr ""
"Prima di proseguire dovreste leggere con attenzione le condizioni d'uso;\n"
"queste riguardano l'intera distribuzione Mandrake Linux, e se non siete\n"
"d'accordo con qualche punto della licenza cliccate sul pulsante\n"
"\"Rifiuta\": la procedura di installazione sarà immediatamente interrotta.\n"
"Per proseguire con l'installazione, invece, cliccate sul pulsante\n"
"\"Accetta\"."

#: ../../install2.pm:1
#, c-format
msgid "You must also format %s"
msgstr "Si deve formattare anche %s"

#: ../../install2.pm:1
#, c-format
msgid ""
"Can't access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""
"Non riesco ad accedere ai moduli del kernel corrispondenti al kernel attuale"
"(manca il file %s). Questo in genere significa che il dischetto di boot non "
"è recente quanto il supporto di installazione. Si consiglia di creare un "
"dischetto di boot aggiornato."

#: ../../install_any.pm:1
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"Si è verificato un errore perché non è stata trovata alcuna unità valida su "
"cui creare nuovi filesystem. Per favore controllare l'hardware per stabilire "
"la causa di questo problema."

#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
msgid "Error reading file %s"
msgstr "Errore nel leggere il file %s"

#: ../../install_any.pm:1
#, c-format
msgid ""
"To use this saved packages selection, boot installation with ``linux "
"defcfg=floppy''"
msgstr ""
"Per usare la selezione di pacchetti salvata sul floppy, occorre avviare "
"l'installazione digitando \"linux defcfg=floppy\""

#: ../../install_any.pm:1
#, c-format
msgid "This floppy is not FAT formatted"
msgstr "Questo floppy non è stato formattato usando MS DOS/Windows"

#: ../../install_any.pm:1
#, c-format
msgid "Insert a FAT formatted floppy in drive %s"
msgstr "Inserisci un floppy MS-DOS nel drive %s"

#: ../../install_any.pm:1
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "Non posso usare broadcast senza un dominio NIS"

#: ../../install_any.pm:1
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""
"Per permettere l'aggiornamento del sistema si devono rimuovere i seguenti "
"pacchetti: %s\n"
"\n"
"\n"
"Devo davvero rimuoverli?\n"

#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
#: ../../standalone/harddrake2:1
#, c-format
msgid "No"
msgstr "No"

#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
#: ../../standalone/harddrake2:1
#, c-format
msgid "Yes"
msgstr "Sì"

#: ../../install_any.pm:1
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They don't have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
"Sono stati selezionati i seguenti server: %s\n"
"\n"
"\n"
"Questi server verranno attivati automaticamente. Non presentano problemi di\n"
"sicurezza conosciuti, ma potrebbero esserne scoperti di nuovi. In tal caso,\n"
" bisogna preoccuparsi di aggiornarli non appena possibile.\n"
"\n"
"\n"
"Devo davvero installare questi server?\n"

#: ../../install_gtk.pm:1
#, fuzzy, c-format
msgid "System configuration"
msgstr "Riconfigurazione automatica"

#: ../../install_gtk.pm:1
#, fuzzy, c-format
msgid "System installation"
msgstr "Installazione di SILO"

#: ../../install_interactive.pm:1
#, c-format
msgid "Bringing down the network"
msgstr "Sto disattivando la rete"

#: ../../install_interactive.pm:1
#, c-format
msgid "Bringing up the network"
msgstr "Sto attivando la rete"

#: ../../install_interactive.pm:1
#, c-format
msgid "Partitioning failed: %s"
msgstr "Partizionamento fallito: %s"

#: ../../install_interactive.pm:1
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr ""
"Il wizard di partizionamento di DrakX ha trovato le seguenti soluzioni:"

#: ../../install_interactive.pm:1
#, c-format
msgid "I can't find any room for installing"
msgstr "Non trovo lo spazio per installare Mandrake Linux"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, don't forget to save using `w'"
msgstr ""
"Adesso si può partizionare %s\n"
"Alla fine, ricordarsi di salvare usando\"w\""

#: ../../install_interactive.pm:1
#, c-format
msgid "Use fdisk"
msgstr "Usa fdisk"

#: ../../install_interactive.pm:1
#, c-format
msgid "Custom disk partitioning"
msgstr "Partizionamento personalizzato del disco"

#: ../../install_interactive.pm:1
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr ""
"Verranno perse TUTTE le partizioni esistenti sul disco %s con i loro dati"

#: ../../install_interactive.pm:1
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "Ci sono più dischi rigidi, su quale vuoi installare linux?"

#: ../../install_interactive.pm:1
#, c-format
msgid "Erase entire disk"
msgstr "Cancella l'intero disco"

#: ../../install_interactive.pm:1
#, c-format
msgid "Remove Windows(TM)"
msgstr "Rimuovi Windows(TM)"

#: ../../install_interactive.pm:1
#, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr ""
"Non c'è una partizione FAT da ridimensionare (o non basta lo spazio "
"disponibile)"

#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""

#: ../../install_interactive.pm:1
#, c-format
msgid "FAT resizing failed: %s"
msgstr "Ridimensionamento FAT fallito: %s"

#: ../../install_interactive.pm:1
#, c-format
msgid "Resizing Windows partition"
msgstr "Sto ridimensionando la partizione Windows"

#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Resizing"
msgstr "Ridimensionamento"

#: ../../install_interactive.pm:1
#, c-format
msgid "partition %s"
msgstr "partizione %s"

#: ../../install_interactive.pm:1
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "Quanto spazio devo lasciare per Windows sulla "

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful:\n"
"this operation is dangerous. If you have not already done\n"
"so, you should first exit the installation, run scandisk\n"
"under Windows (and optionally run defrag), then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"ATTENZIONE!\n"
"\n"
"DrakX ora ridimensionerà la partizione Windows. Attenzione: questa\n"
"operazione è pericolosa. Se non lo si è già fatto, si deve prima uscire\n"
"dall'installazione, lanciare scandisk sotto Windows (e, magari, defrag),\n"
"e poi riavviare l'installazione. Servirebbe anche un backup dei dati.\n"
"Quando si è sicuri, premere Ok."

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
"installation."
msgstr ""
"La partizione Windows è troppo frammentata. Bisogna riavviare il computer "
"sotto Windows, lanciare \"defrag\" e poi ricominciare l'installazione di "
"Mandrake Linux."

#: ../../install_interactive.pm:1
#, fuzzy, c-format
msgid "Computing the size of the Windows partition"
msgstr "Usa lo spazio libero della partizione Windows"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occured: %s"
msgstr ""
"Il ridimensionatore della FAT non riesce a gestire la partizione, \n"
"si è verificato il seguente errore: %s"

#: ../../install_interactive.pm:1
#, c-format
msgid "Which partition do you want to resize?"
msgstr "Quale partizione devo ridimensionare?"

#: ../../install_interactive.pm:1
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "Usa lo spazio libero della partizione Windows"

#: ../../install_interactive.pm:1
#, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""
"Non c'è una partizione FAT da usare come loopback (o non basta lo spazio "
"disponibile)"

#: ../../install_interactive.pm:1
#, c-format
msgid "Swap partition size in MB: "
msgstr "Dimensione partizione di swap in MB: "

#: ../../install_interactive.pm:1
#, c-format
msgid "Root partition size in MB: "
msgstr "Dimensione partizione root in MB: "

#: ../../install_interactive.pm:1
#, c-format
msgid "Choose the sizes"
msgstr "Fissare le dimensioni"

#: ../../install_interactive.pm:1
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "Che partizione devo usare per Linux4Win?"

#: ../../install_interactive.pm:1
#, c-format
msgid "Use the Windows partition for loopback"
msgstr "Usa la partizione Windows per loopback"

#: ../../install_interactive.pm:1
#, c-format
msgid "There is no existing partition to use"
msgstr "Non c'è una partizione esistente da usare"

#: ../../install_interactive.pm:1
#, c-format
msgid "Use existing partitions"
msgstr "Usa partizione esistente"

#: ../../install_interactive.pm:1
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "Non c'è abbastanza spazio libero per creare nuove partizioni"

#: ../../install_interactive.pm:1
#, c-format
msgid "Use free space"
msgstr "Usa lo spazio libero"

#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "Occorre una partizione FAT montata su /boot/efi"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"You don't have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"Manca una partizione di swap\n"
"\n"
"Continuo comunque?"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"Bisogna avere una partizione root.\n"
"Per farla, basta creare una partizione (o cliccare su una già esistente)\n"
"e poi cliccare su \"Punto di mount\" per assegnarle \"/\""

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"Parte dell'hardware del computer richiede driver \"proprietari\" per\n"
"funzionare. Si possono trovare informazioni al riguardo presso: %s"

#: ../../install_messages.pm:1
#, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of Mandrake "
"Linux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
"Congratulazioni, l'installazione è completa.\n"
"Rimuovi il disco di avvio e premi Invio per riavviare il sistema.\n"
"\n"
"\n"
"Per informazioni su aggiornamenti disponibili per questa release di Linux\n"
"Mandrake, consulta l'Errata disponibile su\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Informazioni su come configurare il tuo sistema sono disponibili nel "
"capitolo\n"
"sulla post-installazione della Guida Ufficiale dell'Utente Mandrake Linux."

#: ../../install_messages.pm:1
#, c-format
msgid "http://www.mandrakelinux.com/en/91errata.php3"
msgstr ""

#: ../../install_messages.pm:1
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""
"\n"
"Attenzione\n"
"\n"
"Per favore leggete con attenzione il documento che segue.\n"
"Se non siete d'accordo con una qualsiasi parte, non potete installare il CD\n"
"successivo. Premete \"Rifiuta\" per continuare l'installazione senza di "
"esso.\n"
"\n"
"\n"
"Alcune componenti software contenuti nel CD successivo non sono\n"
"soggette alla licenza GPL o a licenze simili. Ciascuna di tali componenti\n"
"è pertanto soggetta ai termini e alle condizioni della propria\n"
"licenza specifica. Per favore leggete con attenzione e attenetevi a tali\n"
"licenze specifiche prima di usare o ridistribuire tali\n"
"componenti software. Tali licenze in genere proibiscono\n"
"il trasferimento, la duplicazione (eccetto che per scopi di backup),\n"
"la ridistribuzione, il reverse engineering, il deassemblaggio,\n"
"la decompilazione o la modifica della componente in questione.\n"
"Qualunque infrazione del contratto porterà alla immediata cancellazione dei "
"vostri\n"
"diritti per quanto riguarda la specifica licenza.\n"
"A meno che la licenza specifica non vi accordi tali diritti,\n"
"in genere non potete installare i programmi su più di un computer, o "
"adattarlo in\n"
"modo che possa essere usato su una rete. In caso di\n"
"dubbio, per favore contattate direttamente il distributore\n"
"o il curatore della componente. Il trasferimento a terzi o la copia di tali\n"
"componenti, documentazione inclusa, è in genere proibito.\n"
"\n"
"\n"
"Tutti i diritti relativi alle componenti del CD successivo appartengono ai\n"
"loro rispettivi autori e sono protetti dalle leggi relative alla proprietà "
"intellettuale\n"
"e al copyright applicabili ai programmi software.\n"

#: ../../install_messages.pm:1
#, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandrake "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrake Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrake Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"
msgstr ""
"Introduzione\n"
"\n"
"Nel seguito intendiamo con \"Software\" il sistema operativo e le diverse "
"componenti disponibili\n"
"nella distribuzione Mandrake Linux. Il Software include, ma non è limitato "
"a, l'insieme di\n"
"programmi, metodi, regole e documentazione relativi al sistema operativo e "
"alle diverse componenti\n"
"della distribuzione Mandrake Linux.\n"
"\n"
"\n"
"1. Licenza\n"
"\n"
"Per favore leggete con attenzione questo documento.\n"
"Questo documento costituisce un contratto tra voi e la MandrakeSoft S.A. per "
"quanto riguarda l'uso del Software. L'azione di installare, duplicare o "
"usare in qualsiasi modo il Software implica l'esplicita accettazione e il "
"pieno consenso ad adeguarsi ai termini e alle condizioni di questa Licenza. "
"Se non siete d'accordo con uno o più punti della Licenza, non avete "
"l'autorizzazione ad installare, duplicare o utilizzare il Software. "
"Qualunque tentativo di installare, duplicare o utilizzare il Software in "
"modi non conformi ai termini e alle condizioni della Licenza porterà "
"automaticamente all'annullamento della licenza e alla revoca dei vostri "
"diritti ai sensi della stessa. Una volta invalidata la Licenza, avete "
"l'obbligo di distruggere immediatamente tutte le copie del Software in "
"vostro possesso.\n"
"\n"
"\n"
"2. Garanzia e limiti della garanzia\n"
"\n"
"Il Software e la documentazione allegata sono forniti \"come sono\", senza "
"nessuna garanzia, nei limiti permessi dalla legge. In nessun caso, e nei "
"limiti permessi dalla legge, la MandrakeSoft S.A. potrà essere ritenuta "
"responsabile per un qualsiasi danno, speciale, accidentale, diretto o "
"indiretto (inclusi, senza limitazioni, danni dovuti alla perdita di attività "
"commerciali, interruzioni dell'attività commerciale, perdite finanziarie, "
"oneri legali e sanzioni pecuniarie che derivino da sentenze giudiziarie, o "
"qualsiasi altra perdita conseguente), dovuto all'utilizzo o "
"all'impossibilità di utilizzo del Software, anche nel caso in cui "
"MandrakeSoft S.A. sia stata avvertita della possibilità che si verificassero "
"tali danni.\n"
"\n"
"RESPONSABILITÀ LIMITATA IN RELAZIONE AL POSSESSO O ALL'USO DI SOFTWARE "
"PROIBITO IN ALCUNE NAZIONI\n"
"\n"
"Nei limiti di legge, in nessun caso MandrakeSoft S.A. o i suoi distributori "
"potranno essere ritenuti responsabili per un qualsiasi danno, speciale, "
"accidentale, diretto o indiretto (inclusi, senza limitazioni, danni dovuti "
"alla perdita di attività commerciali, interruzioni dell'attività "
"commerciale, perdite finanziarie, oneri legali e sanzioni pecuniarie che "
"derivino da sentenze giudiziarie, o qualsiasi altra perdita conseguente), "
"dovuto al possesso e all'uso di componenti software, o derivante dall'aver "
"scaricato componenti software da uno dei siti di Mandrake Linux, che "
"risultino proibiti o soggetti a limitazioni d'uso in alcune nazioni per "
"effetto di leggi locali. Questa limitazione di responsabilità si applica, ma "
"non è limitata, alle componenti di crittografia sicura incluse nel "
"Software.\n"
"\n"
"\n"
"3. La Licenza GPL (\"General Public License\") e altre Licenze collegate\n"
"\n"
"Il Software è costituito da componenti creati da persone ed enti diversi. La "
"maggior parte di questi componenti sono soggetti ai termini e alle "
"condizioni della GNU General Public License, d'ora in poi chiamata \"GPL\", "
"o di licenze simili. La maggior parte di queste licenze vi consente di "
"usare, duplicare, adattare o ridistribuire le componenti software che le "
"adottano. Per favore leggete con attenzione i termini e le condizioni della "
"licenza relativi a ciascun componente prima di utilizzarla. Qualsiasi "
"domanda relativa alla licenza di una componente software dovrebbe essere "
"indirizzata all'autore di tale componente, e non alla MandrakeSoft. I "
"programmi sviluppati dalla MandrakeSoft S.A. sono soggetti alla licenza GPL."
"La documentazione scritta dalla MandrakeSoft S.A. è soggetta ad una licenza "
"specifica. Per favore consultate la documentazione per ulteriori dettagli.\n"
"\n"
"\n"
"4. Diritti di proprietà intellettuale\n"
"\n"
"Tutti i diritti relativi alle componenti del Software appartengono ai "
"rispettivi autori e sono protetti dalle leggi che disciplinano la proprietà "
"intellettuale e il copyright applicabili ai programmi software. La "
"MandrakeSoft S.A. si riserva il diritto di modificare o adattare il "
"Software, in parte o in tutto, con ogni mezzo e per qualsiasi scopo."
"\"Mandrake\", \"Mandrake Linux\" e i relativi logo sono proprietà della "
"MandrakeSoft S.A.\n"
"\n"
"\n"
"5. Disposizioni diverse\n"
"\n"
"Se una qualsiasi parte di questo contratto è ritenuta non valida, illegale o "
"non applicabile in seguito a sentenza giudiziaria in una determinata "
"giurisdizione, tale parte è esclusa dal contratto. Rimangono vincolanti le "
"altre parti applicabili del contratto. I termini e le condizioni di questa "
"Licenza sono soggetti alle leggi vigenti in Francia. Qualsiasi disputa in "
"merito ai termini di questa licenza verrà risolta preferibilmente per via "
"extra-giudiziaria. Come ultima risorsa, la disputa verrà portata "
"all'attenzione del Tribunale competente di Parigi - Francia. Per qualsiasi "
"domanda riguardo questo documento, per favore contattate MandrakeSoft S.A.\n"

#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
msgid "Entering step `%s'\n"
msgstr "Inizio fase\"%s\"\n"

#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
#: ../../standalone/harddrake2:1
#, c-format
msgid "Help"
msgstr "Aiuto"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "not configured"
msgstr "riconfigura"

#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
msgid "Configure"
msgstr "Configura"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Go on anyway?"
msgstr "Vado avanti comunque?"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "There was an error installing packages:"
msgstr "C'è stato un errore installando i pacchetti:"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "There was an error ordering packages:"
msgstr "C'è stato un errore ordinando i pacchetti:"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"Sostituire il Cd-Rom!\n"
"\n"
"Per favore inserire il Cd-Rom chiamato \"%s\" nel lettore e premere Ok "
"quando\n"
"è pronto. Se non è disponibile, premere Annulla per evitare l'installazione "
"da quel Cd-Rom."

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Refuse"
msgstr "Rifiuta"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakautoinst:1
#, c-format
msgid "Accept"
msgstr "Accetta"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Installing package %s"
msgstr "Installazione del pacchetto %s"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "%d packages"
msgstr "%d pacchetti"

#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
msgid "No details"
msgstr "Dettagli"

#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Details"
msgstr "Dettagli"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Please wait, preparing installation..."
msgstr "Si prega di attendere, sto preparando l'installazione"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Time remaining "
msgstr "Tempo restante "

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Estimating"
msgstr "Sto valutando"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Installing"
msgstr "Installazione"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose the packages you want to install"
msgstr "Scegliere i pacchetti da installare"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Minimal install"
msgstr "Installazione minima"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Updating package selection"
msgstr "Aggiornamento scelta pacchetti"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Load/Save on floppy"
msgstr "Carica/Salva su floppy"

#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "<- Previous"
msgstr "<- Indietro"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
msgid "Install"
msgstr "Installa"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Show automatically selected packages"
msgstr "Mostra i pacchetti selezionati automaticamente"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "You can't unselect this package. It must be upgraded"
msgstr "Non si può deselezionare questo pacchetto. Deve essere aggiornato"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"Questo pacchetto deve essere aggiornato\n"
"Si vuole veramente deselezionarlo?"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "You can't unselect this package. It is already installed"
msgstr "Non si può deselezionare questo pacchetto. È già installato"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "This is a mandatory package, it can't be unselected"
msgstr "Questo è un pacchetto obbligatorio, non può essere deselezionato"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "You can't select/unselect this package"
msgstr "Non si può selezionare/deselezionare questo pacchetto"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "The following packages are going to be removed"
msgstr "I seguenti pacchetti stanno per essere rimossi"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "The following packages are going to be installed"
msgstr "I seguenti pacchetti stanno per essere installati"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
"You can't select this package as there is not enough space left to install it"
msgstr ""
"Non si può selezionare questo pacchetto perchè non è rimasto\n"
"abbastanza spazio per installarlo"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Importance: %s\n"
msgstr "Importanza: %s\n"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Size: %d KB\n"
msgstr "Dimensioni: %d KB\n"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Version: %s\n"
msgstr "Versione: %s\n"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Name: %s\n"
msgstr "Nome: %s\n"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Bad package"
msgstr "Pacchetto errato"

#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Other"
msgstr "Altro"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Total size: %d / %d MB"
msgstr "Dimensione totale: %d / %d MB"

#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Next ->"
msgstr "Avanti ->"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Individual package selection"
msgstr "Selezione individuale dei pacchetti"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Package Group Selection"
msgstr "Selezione per gruppi di pacchetti"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandrake Linux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"Il sistema ha poche risorse. Si potrebbero avere problemi installando\n"
"Mandrake Linux. In tal caso, in alternativa si può tentare "
"un'installazione \n"
"testuale. Per questo, premere \"F1\" all'avvio da CDROM e poi digitare \"text"
"\"."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Save packages selection"
msgstr "Salva scelta pacchetti"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Automated"
msgstr "Automatizzata"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Replay"
msgstr "Ripeti"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
"L'installazione automatica può essere del tutto automatizzata se "
"desiderate,\n"
"ma in tal caso il programma partizionerà automaticamente il disco!!\n"
"(questa opzione è pensata per l'installazione su un'altra macchina).\n"
"\n"
"Probabilmente preferirete ripetere l'installazione.\n"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Generate auto install floppy"
msgstr "Crea il floppy di installazione automatica"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Reboot"
msgstr "Root"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"Alcune fasi non sono completate.\n"
"\n"
"Vuoi veramente interrompere adesso?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Creating auto install floppy..."
msgstr "Sto creando il floppy di installazione automatica ..."

#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "Inserisci un floppy vuoto nel drive %s"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you don't see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"Potrebbe essere necessario cambiare il dispositivo di boot Open Firmware\n"
" per abilitare il bootloader. Se non vedete il prompt del bootloader\n"
" dopo il riavvio, premete Command-Option-O-F al riavvio e digitate:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Poi digitate: shut-down\n"
"Al boot successivo dovreste vedere il prompt del bootloader."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Installation of bootloader failed. The following error occured:"
msgstr ""
"Installazione del bootloader fallita. Si è verificato il seguente errore:"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Installing bootloader"
msgstr "Sto installando il bootloader"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"Errore installando aboot, \n"
"provo a forzare l'installazione anche se ciò distrugge la prima partizione?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Do you want to use aboot?"
msgstr "Vuoi usare aboot?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"You appear to have an OldWorld or Unknown\n"
" machine, the yaboot bootloader will not work for you.\n"
"The install will continue, but you'll\n"
" need to use BootX or some other means to boot your machine"
msgstr ""
"Apparentemente disponi di una macchina OldWorld o\n"
" sconosciuta, il bootloader yaboot non andrà bene per te.\n"
"L'installazione continuerà, ma dovrai usare\n"
" BootX per avviare il tuo computer"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Preparing bootloader..."
msgstr "Preparazione del bootloader"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Domain Admin Password"
msgstr "Password dell'amministratore di dominio"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Domain Admin User Name"
msgstr "Nome dell'amministratore di dominio"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Windows Domain"
msgstr "Dominio Windows"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Authentication Windows Domain"
msgstr "Autenticazione sul dominio Windows"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""
"Perché questo funzioni con un PDC di Windows 2000, probabilmente si dovrà "
"chiedere all'amministratore di lanciare: C:\\>net localgroup \"Pre-Windows "
"2000 Compatible Access\" everyone /add e di riavviare il server.Servirà "
"anche il nome e la password di un amministratore di dominio per aggiungere "
"la macchina al dominio Windows(TM).\n"
"Se la rete non è ancora attiva, Drakx cercherà di collegarsi al dominio dopo "
"la configurazione della rete.\n"
"Se questa configurazione fallisse per qualche motivo e l'autenticazione sul "
"dominio non funzionasse, bisognerà lanciare 'smbpasswd -j DOMAIN -U USER%"
"PASSWORD' il nome del dominio Windows(tm), e nome e password "
"dell'amministratore, dopo il riavvio del sistema.\n"
"Il comando 'wbinfo -t' permette di testare il funzionamento "
"dell'autenticazione."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "NIS Server"
msgstr "Server NIS"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "NIS Domain"
msgstr "Dominio NIS"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Authentication NIS"
msgstr "Autenticazione NIS"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "NIS"
msgstr "NIS"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "LDAP Server"
msgstr "Server LDAP"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "LDAP Base dn"
msgstr "LDAP Base dn"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Authentication LDAP"
msgstr "Autenticazione LDAP"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "LDAP"
msgstr "LDAP"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Local files"
msgstr "File locali"

#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
msgid "Authentication"
msgstr "Autenticazione"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr "Questa password è troppo semplice (deve essere almeno di %d caratteri)"

#. -PO: keep this short or else the buttons will not fit in the window
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "No password"
msgstr "Nessuna password"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Set root password"
msgstr "Scegliere la password per root"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "You have not configured X. Are you sure you really want this?"
msgstr ""

#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
msgid "Services: %d activated for %d registered"
msgstr ""

#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
msgid "Services"
msgstr "Servizi"

#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#: ../../standalone/drakbackup:1
#, c-format
msgid "System"
msgstr "Sistema"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Bootloader"
msgstr "Bootloader da usare"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Boot"
msgstr "Root"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "disabled"
msgstr "disabilita"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "activated"
msgstr "attivare adesso"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Firewall"
msgstr "Firewall/Router"

#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
msgid "Security"
msgstr "Sicurezza"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Security Level"
msgstr "Livello di sicurezza"

#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Network"
msgstr "Rete"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Network & Internet"
msgstr "Interfaccia di rete"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Graphical interface"
msgstr "Avvio con interfaccia grafica"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Hardware"
msgstr "HardDrake"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "TV card"
msgstr "Scheda TV"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
"Non è stata rilevata nessuna scheda audio. Provare con \"harddrake\"\n"
"dopo l'installazione."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Run \"sndconfig\" after installation to configure your sound card"
msgstr ""
"Lanciare \"sndconfig\" dopo l'installazione per configurare la scheda audio"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Do you have an ISA sound card?"
msgstr "C'è una scheda audio ISA?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Sound card"
msgstr "Scheda audio"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Remote CUPS server"
msgstr "Server CUPS remoto"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "No printer"
msgstr "Nessuna stampante"

#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer"
msgstr "Stampante"

#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
#, c-format
msgid "Mouse"
msgstr "Mouse"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Timezone"
msgstr "Fuso orario"

#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
#, c-format
msgid "Keyboard"
msgstr "Tastiera"

#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
msgid "Summary"
msgstr "Riepilogo"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "NTP Server"
msgstr "Server NTP"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Automatic time synchronization (using NTP)"
msgstr "Sincronizzazione automatica dell'ora (usando NTP)"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Hardware clock set to GMT"
msgstr "L'orologio dell'hardware è impostato su GMT"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Which is your timezone?"
msgstr "Qual'è il fuso orario locale?"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Would you like to try again?"
msgstr "Vorresti configurare la stampa?"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Unable to contact mirror %s"
msgstr "Impossibile eseguire la chiamata fork: %s"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Contacting the mirror to get the list of available packages..."
msgstr "Connessione al mirror per avere la lista dei pacchetti disponibili"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose a mirror from which to get the packages"
msgstr "Sceglire un mirror da cui prelevare i pacchetti"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr ""
"Connessione con il sito Mandrake Linux per avere la lista dei mirror "
"disponibili"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been updated after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates ?"
msgstr ""
"Adesso c'è la possibilità di scaricare dei pacchetti aggiornati che sono\n"
"stati distribuiti dopo l'uscita della distribuzione. I pacchetti possono "
"contenere\n"
"aggiornamenti di sicurezza o risoluzione di bug.\n"
"\n"
"Per scaricare questi pacchetti è necessario disporre di una connessione a\n"
"Internet funzionante.\n"
"\n"
"Devo installare gli aggiornamenti?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please insert the Update Modules floppy in drive %s"
msgstr "Per favore insere il floppy di aggiornamento moduli nel drive %s"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please insert the Boot floppy used in drive %s"
msgstr "Per favore insere il floppy di avvio utilizzato nel drive %s"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Post-install configuration"
msgstr "Configurazione post installazione"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"Installazione del pacchetto %s\n"
"%d%%"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Preparing installation"
msgstr "Sto preparando l'installazione"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "Cd-Rom chiamato \"%s\""

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"Se si hanno tutti i CD della lista qui sopra, cliccare su Ok.\n"
"Se non si ha nessuno di questi CD, cliccare su Annulla.\n"
"Se ne mancano solo alcuni, deselezionarli e poi cliccare su Ok."

#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "All"
msgstr "Tutto"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Truly minimal install (especially no urpmi)"
msgstr "Installazione veramente minima (in particolare niente urpmi)"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "With basic documentation (recommended!)"
msgstr "Con la documentazione essenziale (raccomandata!)"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "With X"
msgstr "Con X"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"You haven't selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""
"Nessun gruppo di pacchetti risulta selezionato .\n"
"Per favore scegliere il tipo di installazione minima desiderato:"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Type of install"
msgstr "Tipo di installazione"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Selected size is larger than available space"
msgstr "Lo spazio indicato è maggiore dello spazio disponibile"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Insert a floppy containing package selection"
msgstr "Inserire un floppy contenente la scelta dei pacchetti"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Loading from floppy"
msgstr "Caricamento da floppy"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Package selection"
msgstr "Selezione pacchetti"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Save on floppy"
msgstr "Salva su floppy"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Load from floppy"
msgstr "Carica da floppy"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Please choose load or save package selection on floppy.\n"
"The format is the same as auto_install generated floppies."
msgstr ""
"Per favore scegli di caricare o salvare la selezione pacchetti su floppy.\n"
"Il formato è lo stesso dei floppy generati con auto_install."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr ""
"Sul sistema non è rimasto abbastanza spazio per l'installazione o\n"
"l'aggiornamento (%d > %d)"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Looking for available packages..."
msgstr "Sto cercando i pacchetti disponibili ..."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Finding packages to upgrade..."
msgstr "Sto cercando i pacchetti da aggiornare"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Looking at packages already installed..."
msgstr "Sto esaminando i pacchetti già installati ..."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Looking for available packages and rebuilding rpm database..."
msgstr ""
"Sto cercando i pacchetti disponibili e ricostruendo il database di rpm ..."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Not enough swap space to fulfill installation, please add some"
msgstr ""
"Swap insufficiente per completare l'installazione. Per favore, aumentarne le "
"dimensioni"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can loose data)"
msgstr ""
"Errori nella verifica del filesystem %s. Devo riparare gli errori? "
"(attenzione, si potrebbero perdere dei dati)"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Check bad blocks?"
msgstr "Controllo blocchi danneggiati?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose the partitions you want to format"
msgstr "Scegliere le partizioni da formattare"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr ""
"Bisogna riavviare il PC affinché le modifiche alla tabella delle partizioni\n"
"abbiano effetto"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
"Non c'è spazio libero per un bootstrap di 1MB! L'installazione continua, ma "
"per avviare il sistema si dovrà creare la partizione di bootstrap con "
"DiskDrake"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose the mount points"
msgstr "Scegli i punti di mount"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Scanning partitions to find mount points"
msgstr "Controllo delle partizioni per trovare i punti di mount"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "No partition available"
msgstr "Nessuna partizione disponibile"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Configuring IDE"
msgstr "Sto configurando IDE"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "IDE"
msgstr "IDE"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Configuring PCMCIA cards..."
msgstr "Configuro schede PCMCIA..."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "PCMCIA"
msgstr "PCMCIA"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Button 3 Emulation"
msgstr "Emulazione pulsante 3"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Button 2 Emulation"
msgstr "Emulazione pulsante 2"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Buttons emulation"
msgstr "Emulazione pulsanti"

#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
msgid "Please choose which serial port your mouse is connected to."
msgstr "Per favore indica a che porta seriale è connesso il mouse."

#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
msgid "Mouse Port"
msgstr "Porta del mouse"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please choose your type of mouse."
msgstr "Per favore, scegliere il tipo di mouse."

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Upgrade %s"
msgstr "Aggiornamento"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Is this an install or an upgrade?"
msgstr "È un'installazione o un aggiornamento?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Install/Upgrade"
msgstr "Installa/Aggiorna"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Here is the full list of keyboards available"
msgstr "Ecco la lista completa delle tastiere disponibili"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please choose your keyboard layout."
msgstr "Per favore, scegliere la mappa della tastiera."

#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Quit"
msgstr "Esci"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "License agreement"
msgstr "Accordo di licenza"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "An error occurred"
msgstr "Si è verificato un errore"

#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""
" <Tab>/<Alt-Tab> muove il cursore   | <Barra> seleziona | <F12> videata succ."

#: ../../install_steps_newt.pm:1
#, c-format
msgid "Mandrake Linux Installation %s"
msgstr "Installazione Mandrake Linux %s"

#: ../../install_steps.pm:1
#, c-format
msgid "No floppy drive available"
msgstr "Nessun lettore di floppy disponibile"

#: ../../install_steps.pm:1
#, c-format
msgid "Welcome to %s"
msgstr "Benvenuto in %s"

#: ../../install_steps.pm:1
#, c-format
msgid ""
"Some important packages didn't get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
"\"\n"
msgstr ""
"Alcuni pacchetti importanti non sono stati installati correttamente.\n"
"O il lettore di cdrom o il cdrom sono danneggiati.\n"
"Controllare il cdrom su un sistema già installato digitando \"rpm -qpl "
"mandrake/RPMS/*.rpm\"\n"

#: ../../install_steps.pm:1
#, c-format
msgid "Duplicate mount point %s"
msgstr "Punto di mount doppio: %s"

#: ../../install_steps.pm:1
#, c-format
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"C'è stato un errore, ma non so come gestirlo correttamente.\n"
"Continuare a proprio rischio e pericolo."

#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
#: ../../standalone/service_harddrake:1
#, c-format
msgid "Please wait"
msgstr "Attendere prego"

#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
msgid "Ok"
msgstr "Ok"

#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
#: ../../interactive/newt.pm:1
#, c-format
msgid "Finish"
msgstr "Finisci"

#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
msgid "Basic"
msgstr "Di base"

#: ../../interactive.pm:1
#, c-format
msgid "Advanced"
msgstr "Avanzato"

#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, fuzzy, c-format
msgid "Remove"
msgstr "Rimuovi lista"

#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
msgid "Modify"
msgstr "Modificare"

#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
msgid "Add"
msgstr "Aggiungere"

#: ../../interactive.pm:1
#, c-format
msgid "Choose a file"
msgstr "Scegli un file"

#: ../../keyboard.pm:1
#, c-format
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""
"Qui si può scegliere il tasto, o la combinazione di tasti, che\n"
"permetterà di passare da una configurazione della tastiera\n"
"ad un'altra (ad es. da latin a non-latin)"

#: ../../keyboard.pm:1
#, c-format
msgid "Right \"Windows\" key"
msgstr "Tasto \"Windows\" di destra"

#: ../../keyboard.pm:1
#, c-format
msgid "Left \"Windows\" key"
msgstr "Tasto \"Windows\" di sinistra"

#: ../../keyboard.pm:1
#, c-format
msgid "\"Menu\" key"
msgstr "Tasto \"Menu\""

#: ../../keyboard.pm:1
#, c-format
msgid "Alt and Shift keys simultaneously"
msgstr "I tasti Alt e Shift allo stesso tempo"

#: ../../keyboard.pm:1
#, c-format
msgid "Ctrl and Alt keys simultaneously"
msgstr "Tasti Ctrl e Alt allo stesso tempo"

#: ../../keyboard.pm:1
#, c-format
msgid "CapsLock key"
msgstr "Il tasto CapsLock"

#: ../../keyboard.pm:1
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr "I tasti Ctrl e Shift allo stesso tempo"

#: ../../keyboard.pm:1
#, c-format
msgid "Both Shift keys simultaneously"
msgstr "Entrambi i tasti Shift allo stesso tempo"

#: ../../keyboard.pm:1
#, c-format
msgid "Right Alt key"
msgstr "Tasto Alt di destra"

#: ../../keyboard.pm:1
#, c-format
msgid "Yugoslavian (latin)"
msgstr "Yugoslava (latino)"

#: ../../keyboard.pm:1
#, c-format
msgid "Vietnamese \"numeric row\" QWERTY"
msgstr "Vietnamita \"riga numerica\" QWERTY"

#: ../../keyboard.pm:1
#, c-format
msgid "US keyboard (international)"
msgstr "Tastiera US (internazionale)"

#: ../../keyboard.pm:1
#, c-format
msgid "US keyboard"
msgstr "Tastiera US"

#: ../../keyboard.pm:1
#, c-format
msgid "UK keyboard"
msgstr "Tastiera UK"

#: ../../keyboard.pm:1
#, c-format
msgid "Ukrainian"
msgstr "Ucraina"

#: ../../keyboard.pm:1
#, c-format
msgid "Turkish (modern \"Q\" model)"
msgstr "Turca (modello \"Q\" moderno)"

#: ../../keyboard.pm:1
#, c-format
msgid "Turkish (traditional \"F\" model)"
msgstr "Turca (modulo \"F\" tradizionale)"

#: ../../keyboard.pm:1
#, c-format
msgid "Tajik keyboard"
msgstr "Tastiera Tajik"

#: ../../keyboard.pm:1
#, c-format
msgid "Thai keyboard"
msgstr "Tastiera Thai"

#: ../../keyboard.pm:1
#, c-format
msgid "Tamil (Typewriter-layout)"
msgstr "Tamil (macchina da scrivere)"

#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Tamil (ISCII-layout)"
msgstr "Tamil (TSCII)"

#: ../../keyboard.pm:1
#, c-format
msgid "Serbian (cyrillic)"
msgstr "Serba (cirillica)"

#: ../../keyboard.pm:1
#, c-format
msgid "Slovakian (QWERTY)"
msgstr "Slovacca (QWERTY)"

#: ../../keyboard.pm:1
#, c-format
msgid "Slovakian (QWERTZ)"
msgstr "Slovacca (QWERTZ)"

#: ../../keyboard.pm:1
#, c-format
msgid "Slovenian"
msgstr "Slovena"

#: ../../keyboard.pm:1
#, c-format
msgid "Swedish"
msgstr "Svedese"

#: ../../keyboard.pm:1
#, c-format
msgid "Russian (Yawerty)"
msgstr "Russa (Yawerty)"

#: ../../keyboard.pm:1
#, c-format
msgid "Russian"
msgstr "Russa"

#: ../../keyboard.pm:1
#, c-format
msgid "Romanian (qwerty)"
msgstr "Romena (qwerty)"

#: ../../keyboard.pm:1
#, c-format
msgid "Romanian (qwertz)"
msgstr "Romena (qwertz)"

#: ../../keyboard.pm:1
#, c-format
msgid "Canadian (Quebec)"
msgstr "Canadese (Quebec)"

#: ../../keyboard.pm:1
#, c-format
msgid "Portuguese"
msgstr "Portoghese"

#: ../../keyboard.pm:1
#, c-format
msgid "Polish (qwertz layout)"
msgstr "Polacca (mappa qwertz)"

#: ../../keyboard.pm:1
#, c-format
msgid "Polish (qwerty layout)"
msgstr "Polacca (mappa qwerty)"

#: ../../keyboard.pm:1
#, c-format
msgid "Norwegian"
msgstr "Norvegese"

#: ../../keyboard.pm:1
#, c-format
msgid "Dutch"
msgstr "Olandese"

#: ../../keyboard.pm:1
#, c-format
msgid "Maltese (US)"
msgstr ""

#: ../../keyboard.pm:1
#, c-format
msgid "Maltese (UK)"
msgstr ""

#: ../../keyboard.pm:1
#, c-format
msgid "Mongolian (cyrillic)"
msgstr "Mongola (cirillica)"

#: ../../keyboard.pm:1
#, c-format
msgid "Myanmar (Burmese)"
msgstr ""

#: ../../keyboard.pm:1
#, c-format
msgid "Macedonian"
msgstr "Macedone"

#: ../../keyboard.pm:1
#, c-format
msgid "Malayalam"
msgstr ""

#: ../../keyboard.pm:1
#, c-format
msgid "Latvian"
msgstr "Lettone"

#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian \"phonetic\" QWERTY"
msgstr "Lituana \"fonetica\" QWERTY"

#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian \"number row\" QWERTY"
msgstr "Lituana \"numero riga\" QWERTY"

#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian AZERTY (new)"
msgstr "Lituana AZERTY (nuova)"

#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian AZERTY (old)"
msgstr "Lituana AZERTY (vecchia)"

#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Laotian"
msgstr "Lettone"

#: ../../keyboard.pm:1
#, c-format
msgid "Latin American"
msgstr "Latino americana"

#: ../../keyboard.pm:1
#, c-format
msgid "Korean keyboard"
msgstr "Tastiera coreana"

#: ../../keyboard.pm:1
#, c-format
msgid "Japanese 106 keys"
msgstr "Giapponese 106 tasti"

#: ../../keyboard.pm:1
#, c-format
msgid "Inuktitut"
msgstr ""

#: ../../keyboard.pm:1
#, c-format
msgid "Italian"
msgstr "Italiana"

#: ../../keyboard.pm:1
#, c-format
msgid "Icelandic"
msgstr "Islandese"

#: ../../keyboard.pm:1
#, c-format
msgid "Iranian"
msgstr "Iraniana"

#: ../../keyboard.pm:1
#, c-format
msgid "Israeli (Phonetic)"
msgstr "Israeliana (Fonetica)"

#: ../../keyboard.pm:1
#, c-format
msgid "Israeli"
msgstr "Israeliana"

#: ../../keyboard.pm:1
#, c-format
msgid "Croatian"
msgstr "Croata"

#: ../../keyboard.pm:1
#, c-format
msgid "Hungarian"
msgstr "Ungherese"

#: ../../keyboard.pm:1
#, c-format
msgid "Gurmukhi"
msgstr ""

#: ../../keyboard.pm:1
#, c-format
msgid "Gujarati"
msgstr ""

#: ../../keyboard.pm:1
#, c-format
msgid "Greek"
msgstr "Greca"

#: ../../keyboard.pm:1
#, c-format
msgid "Georgian (\"Latin\" layout)"
msgstr "Georgiana (mappa \"Latina\")"

#: ../../keyboard.pm:1
#, c-format
msgid "Georgian (\"Russian\" layout)"
msgstr "Georgiana (mappa \"Russa\")"

#: ../../keyboard.pm:1
#, c-format
msgid "French"
msgstr "Francese"

#: ../../keyboard.pm:1
#, c-format
msgid "Finnish"
msgstr "Finlandese"

#: ../../keyboard.pm:1
#, c-format
msgid "Spanish"
msgstr "Spagnola"

#: ../../keyboard.pm:1
#, c-format
msgid "Estonian"
msgstr "Estone"

#: ../../keyboard.pm:1
#, c-format
msgid "Dvorak (Swedish)"
msgstr "Dvorak (Svedese)"

#: ../../keyboard.pm:1
#, c-format
msgid "Dvorak (Norwegian)"
msgstr "Dvorak (Norvegese)"

#: ../../keyboard.pm:1
#, c-format
msgid "Dvorak (US)"
msgstr "Dvorak (US)"

#: ../../keyboard.pm:1
#, c-format
msgid "Danish"
msgstr "Danese"

#: ../../keyboard.pm:1
#, c-format
msgid "Devanagari"
msgstr ""

#: ../../keyboard.pm:1
#, c-format
msgid "German (no dead keys)"
msgstr "Tedesca (nessun tasto morto)"

#: ../../keyboard.pm:1
#, c-format
msgid "German"
msgstr "Tedesca"

#: ../../keyboard.pm:1
#, c-format
msgid "Czech (QWERTY)"
msgstr "Ceca (QWERTY)"

#: ../../keyboard.pm:1
#, c-format
msgid "Czech (QWERTZ)"
msgstr "Ceca (QWERTZ)"

#: ../../keyboard.pm:1
#, c-format
msgid "Swiss (French layout)"
msgstr "Svizzera (mappa francese)"

#: ../../keyboard.pm:1
#, c-format
msgid "Swiss (German layout)"
msgstr "Svizzera (mappa tedesca)"

#: ../../keyboard.pm:1
#, c-format
msgid "Belarusian"
msgstr "Bielorussa"

#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Bosnian"
msgstr "Estone"

#: ../../keyboard.pm:1
#, c-format
msgid "Brazilian (ABNT-2)"
msgstr "Brasiliana (ABNT-2)"

#: ../../keyboard.pm:1
#, c-format
msgid "Bulgarian (BDS)"
msgstr "Bulgara (BDS)"

#: ../../keyboard.pm:1
#, c-format
msgid "Bulgarian (phonetic)"
msgstr "Bulgara (fonetica)"

#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Bengali"
msgstr "abilita"

#: ../../keyboard.pm:1
#, c-format
msgid "Belgian"
msgstr "Belga"

#: ../../keyboard.pm:1
#, c-format
msgid "Azerbaidjani (latin)"
msgstr "Azera (latina)"

#: ../../keyboard.pm:1
#, c-format
msgid "Arabic"
msgstr ""

#: ../../keyboard.pm:1
#, c-format
msgid "Armenian (phonetic)"
msgstr "Armena (fonetica)"

#: ../../keyboard.pm:1
#, c-format
msgid "Armenian (typewriter)"
msgstr "Armena (macchina da scrivere)"

#: ../../keyboard.pm:1
#, c-format
msgid "Armenian (old)"
msgstr "Armena (vecchia)"

#: ../../keyboard.pm:1
#, c-format
msgid "Albanian"
msgstr "Albanese"

#: ../../keyboard.pm:1
#, c-format
msgid "Polish"
msgstr "Polacca"

#: ../../keyboard.pm:1
#, c-format
msgid "Dvorak"
msgstr "Dvorak"

#: ../../lang.pm:1
#, c-format
msgid "Zimbabwe"
msgstr "Zimbabwe"

#: ../../lang.pm:1
#, c-format
msgid "Zambia"
msgstr "Zambia"

#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "South Africa"
msgstr "Sud Africa"

#: ../../lang.pm:1
#, fuzzy, c-format
msgid "Serbia"
msgstr "seriale"

#: ../../lang.pm:1
#, c-format
msgid "Mayotte"
msgstr "Mayotte"

#: ../../lang.pm:1
#, c-format
msgid "Yemen"
msgstr "Yemen"

#: ../../lang.pm:1
#, c-format
msgid "Samoa"
msgstr "Samoa"

#: ../../lang.pm:1
#, c-format
msgid "Wallis and Futuna"
msgstr "Isole Wallis e Futuna"

#: ../../lang.pm:1
#, c-format
msgid "Vanuatu"
msgstr "Vanuatu"

#: ../../lang.pm:1
#, c-format
msgid "Vietnam"
msgstr "Vietnam"

#: ../../lang.pm:1
#, c-format
msgid "Virgin Islands (U.S.)"
msgstr "Isole Vergini (U.S.A.)"

#: ../../lang.pm:1
#, c-format
msgid "Virgin Islands (British)"
msgstr "Isole Vergini (Britanniche)"

#: ../../lang.pm:1
#, c-format
msgid "Venezuela"
msgstr "Venezuela"

#: ../../lang.pm:1
#, c-format
msgid "Saint Vincent and the Grenadines"
msgstr "San Vincenzo e le Grenadine"

#: ../../lang.pm:1
#, c-format
msgid "Vatican"
msgstr "Vaticano"

#: ../../lang.pm:1
#, c-format
msgid "Uzbekistan"
msgstr "Uzbekistan"

#: ../../lang.pm:1
#, c-format
msgid "Uruguay"
msgstr "Uruguay"

#: ../../lang.pm:1
#, c-format
msgid "United States Minor Outlying Islands"
msgstr "Isole Minori Esterne degli Stati Uniti"

#: ../../lang.pm:1
#, c-format
msgid "Uganda"
msgstr "Uganda"

#: ../../lang.pm:1
#, c-format
msgid "Ukraine"
msgstr "Ucraina"

#: ../../lang.pm:1
#, c-format
msgid "Tanzania"
msgstr ""

#: ../../lang.pm:1
#, fuzzy, c-format
msgid "Taiwan"
msgstr "Thailandia"

#: ../../lang.pm:1
#, c-format
msgid "Tuvalu"
msgstr "Tuvalu"

#: ../../lang.pm:1
#, c-format
msgid "Trinidad and Tobago"
msgstr "Trinidad e Tobago"

#: ../../lang.pm:1
#, c-format
msgid "Turkey"
msgstr "Turchia"

#: ../../lang.pm:1
#, c-format
msgid "Tonga"
msgstr "Tonga"

#: ../../lang.pm:1
#, c-format
msgid "Tunisia"
msgstr "Tunisia"

#: ../../lang.pm:1
#, c-format
msgid "Turkmenistan"
msgstr "Turkmenistan"

#: ../../lang.pm:1
#, c-format
msgid "East Timor"
msgstr "Timor Est"

#: ../../lang.pm:1
#, c-format
msgid "Tokelau"
msgstr "Tokelau"

#: ../../lang.pm:1
#, c-format
msgid "Tajikistan"
msgstr "Tagikistan"

#: ../../lang.pm:1
#, c-format
msgid "Thailand"
msgstr "Thailandia"

#: ../../lang.pm:1
#, c-format
msgid "Togo"
msgstr "Togo"

#: ../../lang.pm:1
#, c-format
msgid "French Southern Territories"
msgstr "Territori Francesi del Sud"

#: ../../lang.pm:1
#, c-format
msgid "Chad"
msgstr "Chad"

#: ../../lang.pm:1
#, c-format
msgid "Turks and Caicos Islands"
msgstr "Isole Turks e Caicos"

#: ../../lang.pm:1
#, c-format
msgid "Swaziland"
msgstr "Swaziland"

#: ../../lang.pm:1
#, fuzzy, c-format
msgid "Syria"
msgstr "Suriname"

#: ../../lang.pm:1
#, c-format
msgid "El Salvador"
msgstr "El Salvador"

#: ../../lang.pm:1
#, c-format
msgid "Sao Tome and Principe"
msgstr "Sao Tome e Principe"

#: ../../lang.pm:1
#, c-format
msgid "Suriname"
msgstr "Suriname"

#: ../../lang.pm:1
#, c-format
msgid "Somalia"
msgstr "Somalia"

#: ../../lang.pm:1
#, c-format
msgid "Senegal"
msgstr "Senegal"

#: ../../lang.pm:1
#, c-format
msgid "San Marino"
msgstr "San Marino"

#: ../../lang.pm:1
#, c-format
msgid "Sierra Leone"
msgstr "Sierra Leone"

#: ../../lang.pm:1
#, c-format
msgid "Slovakia"
msgstr "Slovacchia"

#: ../../lang.pm:1
#, c-format
msgid "Svalbard and Jan Mayen Islands"
msgstr "Svalbard e le isole Jan Mayen"

#: ../../lang.pm:1
#, c-format
msgid "Slovenia"
msgstr "Slovenia"

#: ../../lang.pm:1
#, c-format
msgid "Saint Helena"
msgstr "Sant'Elena"

#: ../../lang.pm:1
#, c-format
msgid "Singapore"
msgstr "Singapore"

#: ../../lang.pm:1
#, c-format
msgid "Sudan"
msgstr "Sudan"

#: ../../lang.pm:1
#, c-format
msgid "Seychelles"
msgstr "Seychelles"

#: ../../lang.pm:1
#, c-format
msgid "Solomon Islands"
msgstr "Isole Solomon"

#: ../../lang.pm:1
#, c-format
msgid "Saudi Arabia"
msgstr "Arabia Saudita"

#: ../../lang.pm:1
#, c-format
msgid "Rwanda"
msgstr "Ruanda"

#: ../../lang.pm:1
#, fuzzy, c-format
msgid "Russia"
msgstr "Russa"

#: ../../lang.pm:1
#, c-format
msgid "Romania"
msgstr "Romania"

#: ../../lang.pm:1
#, c-format
msgid "Reunion"
msgstr "Reunion"

#: ../../lang.pm:1
#, c-format
msgid "Qatar"
msgstr "Qatar"

#: ../../lang.pm:1
#, c-format
msgid "Palau"
msgstr "Palau"

#: ../../lang.pm:1
#, c-format
msgid "Paraguay"
msgstr "Paraguay"

#: ../../lang.pm:1
#, c-format
msgid "Portugal"
msgstr "Portogallo"

#: ../../lang.pm:1
#, fuzzy, c-format
msgid "Palestine"
msgstr "Salva scelta pacchetti"

#: ../../lang.pm:1
#, c-format
msgid "Puerto Rico"
msgstr "Porto Rico"

#: ../../lang.pm:1
#, c-format
msgid "Pitcairn"
msgstr "Pitcairn"

#: ../../lang.pm:1
#, c-format
msgid "Saint Pierre and Miquelon"
msgstr "San Pietro e Miquelon"

#: ../../lang.pm:1
#, c-format
msgid "Poland"
msgstr "Polonia"

#: ../../lang.pm:1
#, c-format
msgid "Pakistan"
msgstr "Pakistan"

#: ../../lang.pm:1
#, c-format
msgid "Philippines"
msgstr "Filippine"

#: ../../lang.pm:1
#, c-format
msgid "Papua New Guinea"
msgstr "Papua Nuova Guinea"

#: ../../lang.pm:1
#, c-format
msgid "French Polynesia"
msgstr "Polinesia Francese"

#: ../../lang.pm:1
#, c-format
msgid "Peru"
msgstr "Peru"

#: ../../lang.pm:1
#, c-format
msgid "Panama"
msgstr "Panama"

#: ../../lang.pm:1
#, c-format
msgid "Oman"
msgstr "Oman"

#: ../../lang.pm:1
#, c-format
msgid "New Zealand"
msgstr "Nuova Zelanda"

#: ../../lang.pm:1
#, c-format
msgid "Niue"
msgstr "Niue"

#: ../../lang.pm:1
#, c-format
msgid "Nauru"
msgstr "Nauru"

#: ../../lang.pm:1
#, c-format
msgid "Nepal"
msgstr "Nepal"

#: ../../lang.pm:1
#, c-format
msgid "Nicaragua"
msgstr "Nicaragua"

#: ../../lang.pm:1
#, c-format
msgid "Nigeria"
msgstr "Nigeria"

#: ../../lang.pm:1
#, c-format
msgid "Norfolk Island"
msgstr "Isole di Norfolk"

#: ../../lang.pm:1
#, c-format
msgid "Niger"
msgstr "Niger"

#: ../../lang.pm:1
#, c-format
msgid "New Caledonia"
msgstr "Nuova Caledonia"

#: ../../lang.pm:1
#, c-format
msgid "Namibia"
msgstr "Namibia"

#: ../../lang.pm:1
#, c-format
msgid "Mozambique"
msgstr "Mozambico"

#: ../../lang.pm:1
#, c-format
msgid "Malaysia"
msgstr "Malesia"

#: ../../lang.pm:1
#, c-format
msgid "Mexico"
msgstr "Messico"

#: ../../lang.pm:1
#, c-format
msgid "Malawi"
msgstr "Malawi"

#: ../../lang.pm:1
#, c-format
msgid "Maldives"
msgstr "Maldive"

#: ../../lang.pm:1
#, c-format
msgid "Mauritius"
msgstr "Mauritius"

#: ../../lang.pm:1
#, c-format
msgid "Malta"
msgstr "Malta"

#: ../../lang.pm:1
#, c-format
msgid "Montserrat"
msgstr "Montserrat"

#: ../../lang.pm:1
#, c-format
msgid "Mauritania"
msgstr "Mauritania"

#: ../../lang.pm:1
#, c-format
msgid "Martinique"
msgstr "Martinica"

#: ../../lang.pm:1
#, c-format
msgid "Northern Mariana Islands"
msgstr "Isole Mariana del Nord"

#: ../../lang.pm:1
#, c-format
msgid "Mongolia"
msgstr "Mongolia"

#: ../../lang.pm:1
#, c-format
msgid "Myanmar"
msgstr "Myanmar"

#: ../../lang.pm:1
#, c-format
msgid "Mali"
msgstr "Mali"

#: ../../lang.pm:1
#, c-format
msgid "Macedonia"
msgstr "Macedonia"

#: ../../lang.pm:1
#, c-format
msgid "Marshall Islands"
msgstr "Isole di Marshall"

#: ../../lang.pm:1
#, c-format
msgid "Madagascar"
msgstr "Madagascar"

#: ../../lang.pm:1
#, c-format
msgid "Moldova"
msgstr "Moldavia"

#: ../../lang.pm:1
#, c-format
msgid "Monaco"
msgstr "Monaco"

#: ../../lang.pm:1
#, c-format
msgid "Morocco"
msgstr "Marocco"

#: ../../lang.pm:1
#, fuzzy, c-format
msgid "Libya"
msgstr "Liberia"

#: ../../lang.pm:1
#, c-format
msgid "Latvia"
msgstr "Lettonia"

#: ../../lang.pm:1
#, c-format
msgid "Luxembourg"
msgstr "Lussemburgo"

#: ../../lang.pm:1
#, c-format
msgid "Lithuania"
msgstr "Lituania"

#: ../../lang.pm:1
#, c-format
msgid "Lesotho"
msgstr "Lesotho"

#: ../../lang.pm:1
#, c-format
msgid "Liberia"
msgstr "Liberia"

#: ../../lang.pm:1
#, c-format
msgid "Sri Lanka"
msgstr "Sri Lanka"

#: ../../lang.pm:1
#, c-format
msgid "Liechtenstein"
msgstr "Liechtenstein"

#: ../../lang.pm:1
#, c-format
msgid "Saint Lucia"
msgstr "Santa Lucia"

#: ../../lang.pm:1
#, c-format
msgid "Lebanon"
msgstr "Libano"

#: ../../lang.pm:1
#, c-format
msgid "Laos"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Kazakhstan"
msgstr "Kazakistan"

#: ../../lang.pm:1
#, c-format
msgid "Cayman Islands"
msgstr "Isole Cayman"

#: ../../lang.pm:1
#, c-format
msgid "Kuwait"
msgstr "Kuwait"

#: ../../lang.pm:1
#, fuzzy, c-format
msgid "Korea"
msgstr "Ancora"

#: ../../lang.pm:1
#, c-format
msgid "Korea (North)"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Saint Kitts and Nevis"
msgstr "San Kitts e Nevis"

#: ../../lang.pm:1
#, c-format
msgid "Comoros"
msgstr "Comoros"

#: ../../lang.pm:1
#, c-format
msgid "Kiribati"
msgstr "Kiribati"

#: ../../lang.pm:1
#, c-format
msgid "Cambodia"
msgstr "Cambogia"

#: ../../lang.pm:1
#, c-format
msgid "Kyrgyzstan"
msgstr "Kyrgyzstan"

#: ../../lang.pm:1
#, c-format
msgid "Kenya"
msgstr "Kenya"

#: ../../lang.pm:1
#, c-format
msgid "Japan"
msgstr "Giappone"

#: ../../lang.pm:1
#, c-format
msgid "Jordan"
msgstr "Giordania"

#: ../../lang.pm:1
#, c-format
msgid "Jamaica"
msgstr "Jamaica"

#: ../../lang.pm:1
#, c-format
msgid "Iceland"
msgstr "Islanda"

#: ../../lang.pm:1
#, fuzzy, c-format
msgid "Iran"
msgstr "Iraq"

#: ../../lang.pm:1
#, c-format
msgid "Iraq"
msgstr "Iraq"

#: ../../lang.pm:1
#, c-format
msgid "British Indian Ocean Territory"
msgstr "Territorio dell'Oceano Indiano Britannico"

#: ../../lang.pm:1
#, c-format
msgid "India"
msgstr "India"

#: ../../lang.pm:1
#, c-format
msgid "Israel"
msgstr "Israele"

#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "Ireland"
msgstr "Irlanda"

#: ../../lang.pm:1
#, c-format
msgid "Indonesia"
msgstr "Indonesia"

#: ../../lang.pm:1
#, c-format
msgid "Hungary"
msgstr "Ungheria"

#: ../../lang.pm:1
#, c-format
msgid "Haiti"
msgstr "Haiti"

#: ../../lang.pm:1
#, c-format
msgid "Croatia"
msgstr "Croazia"

#: ../../lang.pm:1
#, c-format
msgid "Honduras"
msgstr "Honduras"

#: ../../lang.pm:1
#, c-format
msgid "Heard and McDonald Islands"
msgstr "Isola di Heard e Isola di McDonald"

#: ../../lang.pm:1
#, c-format
msgid "Hong Kong"
msgstr "Hong Kong"

#: ../../lang.pm:1
#, c-format
msgid "Guyana"
msgstr "Guyana"

#: ../../lang.pm:1
#, c-format
msgid "Guinea-Bissau"
msgstr "Guinea-Bissau"

#: ../../lang.pm:1
#, c-format
msgid "Guam"
msgstr "Guam"

#: ../../lang.pm:1
#, c-format
msgid "Guatemala"
msgstr "Guatemala"

#: ../../lang.pm:1
#, c-format
msgid "South Georgia and the South Sandwich Islands"
msgstr "Georgia del Sud e le isole Sandwich meridionali"

#: ../../lang.pm:1
#, c-format
msgid "Equatorial Guinea"
msgstr "Guinea Equatoriale"

#: ../../lang.pm:1
#, c-format
msgid "Guadeloupe"
msgstr "Guadalupe"

#: ../../lang.pm:1
#, c-format
msgid "Guinea"
msgstr "Guinea"

#: ../../lang.pm:1
#, c-format
msgid "Gambia"
msgstr "Gambia"

#: ../../lang.pm:1
#, c-format
msgid "Greenland"
msgstr "Groenlandia"

#: ../../lang.pm:1
#, c-format
msgid "Gibraltar"
msgstr "Gibilterra"

#: ../../lang.pm:1
#, c-format
msgid "Ghana"
msgstr "Ghana"

#: ../../lang.pm:1
#, c-format
msgid "French Guiana"
msgstr "Guiana Francese"

#: ../../lang.pm:1
#, c-format
msgid "Georgia"
msgstr "Georgia"

#: ../../lang.pm:1
#, c-format
msgid "Grenada"
msgstr "Grenada"

#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "United Kingdom"
msgstr "Regno Unito"

#: ../../lang.pm:1
#, c-format
msgid "Gabon"
msgstr "Gabon"

#: ../../lang.pm:1
#, c-format
msgid "Faroe Islands"
msgstr "Isole Faroe"

#: ../../lang.pm:1
#, c-format
msgid "Micronesia"
msgstr "Micronesia"

#: ../../lang.pm:1
#, c-format
msgid "Falkland Islands (Malvinas)"
msgstr "Isole Falkland (Malvinas)"

#: ../../lang.pm:1
#, c-format
msgid "Fiji"
msgstr "Fiji"

#: ../../lang.pm:1
#, c-format
msgid "Finland"
msgstr "Finlandia"

#: ../../lang.pm:1
#, c-format
msgid "Ethiopia"
msgstr "Etiopia"

#: ../../lang.pm:1
#, c-format
msgid "Spain"
msgstr "Spagna"

#: ../../lang.pm:1
#, c-format
msgid "Eritrea"
msgstr "Eritrea"

#: ../../lang.pm:1
#, c-format
msgid "Western Sahara"
msgstr "Sahara Occidentale"

#: ../../lang.pm:1
#, c-format
msgid "Egypt"
msgstr "Egitto"

#: ../../lang.pm:1
#, c-format
msgid "Estonia"
msgstr "Estonia"

#: ../../lang.pm:1
#, c-format
msgid "Ecuador"
msgstr "Ecuador"

#: ../../lang.pm:1
#, c-format
msgid "Algeria"
msgstr "Algeria"

#: ../../lang.pm:1
#, c-format
msgid "Dominican Republic"
msgstr "Rebubblica Dominicana"

#: ../../lang.pm:1
#, c-format
msgid "Dominica"
msgstr "Dominica"

#: ../../lang.pm:1
#, c-format
msgid "Denmark"
msgstr "Danimarca"

#: ../../lang.pm:1
#, c-format
msgid "Djibouti"
msgstr "Gibuti"

#: ../../lang.pm:1
#, c-format
msgid "Cyprus"
msgstr "Cipro"

#: ../../lang.pm:1
#, c-format
msgid "Christmas Island"
msgstr "Isola di Natale"

#: ../../lang.pm:1
#, c-format
msgid "Cape Verde"
msgstr "Capo Verde"

#: ../../lang.pm:1
#, c-format
msgid "Cuba"
msgstr "Cuba"

#: ../../lang.pm:1
#, c-format
msgid "Colombia"
msgstr "Colombia"

#: ../../lang.pm:1
#, c-format
msgid "China"
msgstr "Cina"

#: ../../lang.pm:1
#, c-format
msgid "Cameroon"
msgstr "Camerun"

#: ../../lang.pm:1
#, c-format
msgid "Chile"
msgstr "Cile"

#: ../../lang.pm:1
#, c-format
msgid "Cook Islands"
msgstr "Isole di Cook"

#: ../../lang.pm:1
#, c-format
msgid "Cote d'Ivoire"
msgstr "Costa d'Avorio"

#: ../../lang.pm:1
#, c-format
msgid "Switzerland"
msgstr "Svizzera"

#: ../../lang.pm:1
#, c-format
msgid "Congo (Brazzaville)"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Central African Republic"
msgstr "Repubblica Centro Africana"

#: ../../lang.pm:1
#, c-format
msgid "Congo (Kinshasa)"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Cocos (Keeling) Islands"
msgstr "Isole Cocos (Keeling)"

#: ../../lang.pm:1
#, c-format
msgid "Canada"
msgstr "Canada"

#: ../../lang.pm:1
#, c-format
msgid "Belize"
msgstr "Belize"

#: ../../lang.pm:1
#, c-format
msgid "Belarus"
msgstr "Belarus"

#: ../../lang.pm:1
#, c-format
msgid "Botswana"
msgstr "Botswana"

#: ../../lang.pm:1
#, c-format
msgid "Bouvet Island"
msgstr "Isola di Bouvet"

#: ../../lang.pm:1
#, c-format
msgid "Bhutan"
msgstr "Bhutan"

#: ../../lang.pm:1
#, c-format
msgid "Bahamas"
msgstr "Bahamas"

#: ../../lang.pm:1
#, c-format
msgid "Brazil"
msgstr "Brasile"

#: ../../lang.pm:1
#, c-format
msgid "Bolivia"
msgstr "Bolivia"

#: ../../lang.pm:1
#, c-format
msgid "Brunei Darussalam"
msgstr "Brunei Darussalam"

#: ../../lang.pm:1
#, c-format
msgid "Bermuda"
msgstr "Bermuda"

#: ../../lang.pm:1
#, c-format
msgid "Benin"
msgstr "Benin"

#: ../../lang.pm:1
#, c-format
msgid "Burundi"
msgstr "Burundi"

#: ../../lang.pm:1
#, c-format
msgid "Bahrain"
msgstr "Bahrain"

#: ../../lang.pm:1
#, c-format
msgid "Bulgaria"
msgstr "Bulgaria"

#: ../../lang.pm:1
#, c-format
msgid "Burkina Faso"
msgstr "Burkina Faso"

#: ../../lang.pm:1
#, c-format
msgid "Bangladesh"
msgstr "Bangladesh"

#: ../../lang.pm:1
#, c-format
msgid "Barbados"
msgstr "Barbados"

#: ../../lang.pm:1
#, c-format
msgid "Bosnia and Herzegovina"
msgstr "Bosnia e Herzegovina"

#: ../../lang.pm:1
#, c-format
msgid "Azerbaijan"
msgstr "Azerbaijan"

#: ../../lang.pm:1
#, c-format
msgid "Aruba"
msgstr "Aruba"

#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "Australia"
msgstr "Australia"

#: ../../lang.pm:1
#, c-format
msgid "American Samoa"
msgstr "Samoa Americana"

#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "Argentina"
msgstr "Argentina"

#: ../../lang.pm:1
#, c-format
msgid "Antarctica"
msgstr "Antartide"

#: ../../lang.pm:1
#, c-format
msgid "Angola"
msgstr "Angola"

#: ../../lang.pm:1
#, c-format
msgid "Netherlands Antilles"
msgstr "Antille dei Paesi Bassi"

#: ../../lang.pm:1
#, c-format
msgid "Armenia"
msgstr "Armenia"

#: ../../lang.pm:1
#, c-format
msgid "Albania"
msgstr "Albania"

#: ../../lang.pm:1
#, c-format
msgid "Anguilla"
msgstr "Anguilla"

#: ../../lang.pm:1
#, c-format
msgid "Antigua and Barbuda"
msgstr "Antigua e Barbuda"

#: ../../lang.pm:1
#, c-format
msgid "United Arab Emirates"
msgstr "Emirati Arabi Uniti"

#: ../../lang.pm:1
#, c-format
msgid "Andorra"
msgstr "Andorra"

#: ../../lang.pm:1
#, c-format
msgid "Afghanistan"
msgstr "Afghanistan"

#: ../../lang.pm:1
#, c-format
msgid "default:LTR"
msgstr "default:LTR"

#: ../../loopback.pm:1
#, c-format
msgid "Circular mounts %s\n"
msgstr "Mount circolari %s\n"

#: ../../lvm.pm:1
#, c-format
msgid "Remove the logical volumes first\n"
msgstr "Prima rimuovi i volumi logici\n"

#: ../../modules.pm:1
#, c-format
msgid ""
"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
"Il supporto PCMCIA non è più disponibile per i kernel 2.2, per favore usate "
"un kernel 2.4."

#: ../../mouse.pm:1
#, c-format
msgid "MOVE YOUR WHEEL!"
msgstr "MUOVI LA RUOTA!"

#: ../../mouse.pm:1
#, c-format
msgid "To activate the mouse,"
msgstr "Per attivare il mouse"

#: ../../mouse.pm:1
#, c-format
msgid "Please test the mouse"
msgstr "Per favore prova il mouse"

#: ../../mouse.pm:1
#, c-format
msgid "No mouse"
msgstr "Nessun mouse"

#: ../../mouse.pm:1
#, c-format
msgid "none"
msgstr "nessuno"

#: ../../mouse.pm:1
#, c-format
msgid "3 buttons"
msgstr "3 pulsanti"

#: ../../mouse.pm:1
#, c-format
msgid "2 buttons"
msgstr "2 pulsanti"

#: ../../mouse.pm:1
#, c-format
msgid "1 button"
msgstr "1 pulsante"

#: ../../mouse.pm:1
#, c-format
msgid "busmouse"
msgstr "busmouse"

#: ../../mouse.pm:1
#, c-format
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: ../../mouse.pm:1
#, c-format
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Mouse Logitech (seriale, vecchio tipo C7)"

#: ../../mouse.pm:1
#, c-format
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: ../../mouse.pm:1
#, c-format
msgid "MM Series"
msgstr "Serie MM"

#: ../../mouse.pm:1
#, c-format
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: ../../mouse.pm:1
#, c-format
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: ../../mouse.pm:1
#, c-format
msgid "Logitech CC Series"
msgstr "Logitech serie CC (seriale)"

#: ../../mouse.pm:1
#, c-format
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: ../../mouse.pm:1
#, c-format
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: ../../mouse.pm:1
#, c-format
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: ../../mouse.pm:1
#, c-format
msgid "Generic 3 Button Mouse"
msgstr "Mouse generico a 3 Pulsanti"

#: ../../mouse.pm:1
#, c-format
msgid "Generic 2 Button Mouse"
msgstr "Mouse generico a 2 Pulsanti"

#: ../../mouse.pm:1
#, c-format
msgid "serial"
msgstr "seriale"

#: ../../mouse.pm:1
#, c-format
msgid "Microsoft Explorer"
msgstr "Microsoft Explorer"

#: ../../mouse.pm:1
#, c-format
msgid "Wheel"
msgstr "Ruota"

#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
msgid "Generic"
msgstr "Generico"

#: ../../mouse.pm:1
#, c-format
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: ../../mouse.pm:1
#, c-format
msgid "GlidePoint"
msgstr "GlidePoint"

#: ../../mouse.pm:1
#, c-format
msgid "Generic PS2 Wheel Mouse"
msgstr "Mouse con rotellina su porta PS2 generico "

#: ../../mouse.pm:1
#, c-format
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
msgid "Standard"
msgstr "Normale"

#: ../../mouse.pm:1
#, c-format
msgid "Sun - Mouse"
msgstr "Sun - Mouse"

#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Toggle between flat and group sorted"
msgstr "Cambia tra ordinamento semplice o a gruppi"

#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Collapse Tree"
msgstr "Raggruppa struttura"

#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Expand Tree"
msgstr "Espandi struttura"

#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Info"
msgstr "Info"

#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Is this correct?"
msgstr "È corretto?"

#: ../../my_gtk.pm:1
#, c-format
msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"

#: ../../partition_table.pm:1
#, c-format
msgid "Error writing to file %s"
msgstr "Errore scrivendo sul file %s"

#: ../../partition_table.pm:1
#, c-format
msgid "Bad backup file"
msgstr "File di backup errato"

#: ../../partition_table.pm:1
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Ripristino da file %s fallito: %s"

#: ../../partition_table.pm:1
#, c-format
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions."
msgstr ""
"Hai un buco nella tua tabella delle partizioni, ma io non posso usarlo.\n"
"L'unica soluzione è di muovere le tue partizioni primarie per avere il buco "
"vicino alle partizioni estese"

#: ../../partition_table.pm:1
#, c-format
msgid "Extended partition not supported on this platform"
msgstr "Partizione estesa non supportata su questa piattaforma"

#: ../../partition_table.pm:1
#, c-format
msgid "mount failed: "
msgstr "mount fallito: "

#: ../../pkgs.pm:1
#, c-format
msgid "maybe"
msgstr "forse"

#: ../../pkgs.pm:1
#, c-format
msgid "nice"
msgstr "bello"

#: ../../pkgs.pm:1
#, c-format
msgid "very nice"
msgstr "molto bello"

#: ../../pkgs.pm:1
#, c-format
msgid "important"
msgstr "importante"

#: ../../pkgs.pm:1
#, c-format
msgid "must have"
msgstr "da avere"

#: ../../raid.pm:1
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "Non ci sono abbastanza partizioni per RAID livello %d\n"

#: ../../raid.pm:1
#, c-format
msgid "mkraid failed"
msgstr "mkraid fallito"

#: ../../raid.pm:1
#, c-format
msgid "mkraid failed (maybe raidtools are missing?)"
msgstr "mkraid fallito (forse manca raidtools?)"

#: ../../raid.pm:1
#, c-format
msgid "Can't add a partition to _formatted_ RAID md%d"
msgstr "Non posso aggiungere una partizione a _RAID_ formattato md%d"

#: ../../services.pm:1
#, c-format
msgid "Stop"
msgstr "Stop"

#: ../../services.pm:1
#, c-format
msgid "Start"
msgstr "Avvia"

#: ../../services.pm:1
#, c-format
msgid "On boot"
msgstr "Al boot"

#: ../../services.pm:1
#, c-format
msgid ""
"No additional information\n"
"about this service, sorry."
msgstr ""
"Spiacente, ma non ci sono ulteriori\n"
"informazioni riguardo questo servizio."

#: ../../services.pm:1
#, c-format
msgid "Services and deamons"
msgstr "Servizi e demoni"

#: ../../services.pm:1
#, c-format
msgid "stopped"
msgstr "fermato"

#: ../../services.pm:1
#, c-format
msgid "running"
msgstr "in esecuzione"

#: ../../services.pm:1
#, c-format
msgid "Choose which services should be automatically started at boot time"
msgstr "Scegli quali servizi saranno lanciati automaticamente all'avvio."

#: ../../services.pm:1
#, c-format
msgid "Database Server"
msgstr "Server di database"

#: ../../services.pm:1
#, c-format
msgid "Remote Administration"
msgstr "Amministrazione remota"

#: ../../services.pm:1
#, c-format
msgid "File sharing"
msgstr ""

#: ../../services.pm:1
#, c-format
msgid "Internet"
msgstr "Internet"

#: ../../services.pm:1
#, c-format
msgid "Printing"
msgstr "Stampa"

#: ../../services.pm:1
#, c-format
msgid "Starts the X Font Server (this is mandatory for XFree to run)."
msgstr "Avvia il server di caratteri (indispensabile per eseguire XFree)."

#: ../../services.pm:1
#, c-format
msgid "Load the drivers for your usb devices."
msgstr "Carica i driver per i tuoi dispositivi USB."

#: ../../services.pm:1
#, c-format
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""
"Syslog è una utilità che molti demoni usano per aggiungere messaggi\n"
"in vari file di log di sistema. È una buona idea lanciare sempre syslog."

#: ../../services.pm:1
#, c-format
msgid "Launch the sound system on your machine"
msgstr "Lancia il sistema audio sulla tua macchina"

#: ../../services.pm:1
#, c-format
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
"Il protocollo rwho permette ad utenti remoti di ottenere una lista di \n"
"tutti gli utenti connessi ad una macchina su cui gira il demone rwho\n"
"(similarmente a finger)."

#: ../../services.pm:1
#, c-format
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""
"Il protocollo rusers permette agli utenti di una rete di identificare\n"
"chi è connesso su una macchina interrogata in proposito."

#: ../../services.pm:1
#, c-format
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""
"Il protocollo rstat permette agli utenti di una rete di recuperare\n"
"misurazioni delle prestazioni per ogni macchina di quella rete."

#: ../../services.pm:1
#, c-format
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""
"Il demone routed permette tabelle di router IP automatiche aggiornate per\n"
"mezzo del protocollo RIP. Mentre RIP è largamente usato in piccole reti, \n"
"protocolli di routing più complessi sono necessari per reti più complesse."

#: ../../services.pm:1
#, fuzzy, c-format
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
"Assegna dispositivi raw a dispositivi a blocchi (quali le partizioni\n"
"di un disco rigido), da usare con applicazioni come Oracle."

#: ../../services.pm:1
#, c-format
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""
"Salva e ripristina l'entropia del sistema per una generazione di numeri\n"
"casuali di alta qualità."

#: ../../services.pm:1
#, c-format
msgid ""
"Postfix is a Mail Transport Agent, which is the program that moves mail from "
"one machine to another."
msgstr ""
"Postfix è un Agente di Trasporto di Posta, un programma che\n"
"sposta messaggi da una macchina ad un'altra."

#: ../../services.pm:1
#, c-format
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"Il portmapper gestisce connessioni RPC, che sono usate da protocolli\n"
"come NFS e NIS. Il server portmap deve essere in esecuzione su macchine che\n"
"agiscono come server per protocolli che fanno uso di meccanismi RPC."

#: ../../services.pm:1
#, c-format
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It won't get started unless configured so it is safe to "
"have\n"
"it installed on machines that don't need it."
msgstr ""
"Il supporto PCMCIA di solito serve per usare dispositivi di tipo ethernet e\n"
"modem nei portatili. Non sarà lanciato se non è stato configurato, perciò "
"è \n"
"sicuro da avere installato anche su macchine che non lo richiedono."

#: ../../services.pm:1
#, c-format
msgid "Support the OKI 4w and compatible winprinters."
msgstr "Supporto per le stampanti Windows OKI 4w e compatibili."

#: ../../services.pm:1
#, c-format
msgid ""
"Automatically switch on numlock key locker under console\n"
"and XFree at boot."
msgstr ""
"Attiva automaticamente il tasto relativo al tastierino numerico\n"
"per la console e XFree al momento del boot."

#: ../../services.pm:1
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS è un popolare protocollo per la condivisione di file attraverso reti TCP/"
"IP.\n"
"Questo servizio consente funzionalità di blocco dei file NFS."

#: ../../services.pm:1
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS è un popolare protocollo per la condivisione di file attraverso reti\n"
"TCP/IP. Questo servizio consente funzionalità di server NFS, che sono\n"
"configurate tramite il file /etc/exports."

#: ../../services.pm:1
#, c-format
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"Attiva/Disattiva tutte le interfacce di rete di cui è previsto l'avvio\n"
"al momento del boot."

#: ../../services.pm:1
#, c-format
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"Monta e smonta tutti i punti di mount di Network File System (NFS),\n"
"SMB (Lan Manager/Windows), e NCP (Netware)."

#: ../../services.pm:1
#, c-format
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
"names to IP addresses."
msgstr ""
"named (BIND) è un Domain Name Server (DNS) utilizzato per risolvere\n"
"nomi host in indirizzi IP."

#: ../../services.pm:1
#, c-format
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""
"Linux Virtual Server, usato per impostare un server ad alte prestazioni\n"
"e alta disponibilità."

#: ../../services.pm:1
#, c-format
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
"lpd è il demone di stampa richiesto perchè lpr funzioni propriamente. È\n"
"fondamentalmente un server che distribuisce i job di stampa alle stampanti."

#: ../../services.pm:1
#, c-format
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""
"Linuxconf talvolta deve eseguire alcune operazioni al momento\n"
"del boot per gestire la configurazione del sistema."

#: ../../services.pm:1
#, c-format
msgid "Automatic detection and configuration of hardware at boot."
msgstr "Riconoscimento e configurazione automatica dell'hardware al boot."

#: ../../services.pm:1
#, c-format
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""
"Rigenerazione automatica dell'intestazione del kernel /boot per\n"
"/usr/include/linux/{autoconf,versione}.h"

#: ../../services.pm:1
#, c-format
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"Questo pacchetto carica la mappa di tastiera selezionata come definito in\n"
"/etc/sysconfig/keyboard, che può essere scelta usando l'utilità kdbconfig.\n"
"Dovresti lasciarlo abilitato per la maggior parte delle macchine."

#: ../../services.pm:1
#, c-format
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""
"Lancio del filtro dei pacchetti per la serie di kernel 2.2, allo\n"
"scopo di impostare un firewall che protegga la tua macchina da intrusioni."

#: ../../services.pm:1
#, c-format
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"Il demone superserver di Internet (comunemente chiamato inetd) avvia una\n"
"varietà di altri servizi Internet a richiesta. È responsabile per l'avvio\n"
"di molti servizi, inclusi telnet, ftp, rsh, e rlogin. Disabilitando inetd\n"
"si disabilitano tutti i servizi di cui è responsabile."

#: ../../services.pm:1
#, c-format
msgid ""
"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
"Apache è un server per World Wide Web. È usato per gestire files HTML\n"
"e CGI."

#: ../../services.pm:1
#, c-format
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""
"HardDrake esegue un'indagine riguardo l'hardware, e opzionalmente\n"
"configura l'hardware nuovo/cambiato."

#: ../../services.pm:1
#, c-format
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM aggiunge il supporto del mouse ad applicazioni Linux basate su testo "
"come\n"
"Midnight Commander. Permette anche operazioni taglia/incolla via mouse in \n"
"console e include supporto per dei menu a scomparsa in console."

#: ../../services.pm:1
#, c-format
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"cron è un programma UNIX standard che lancia programmi definiti dall'utente\n"
"ad intervalli periodici programmati. vixie cron aggiunge un numero di "
"funzioni\n"
"al cron UNIX di base, inclusi maggior sicurezza e opzioni di "
"configurazione \n"
"più potenti."

#: ../../services.pm:1
#, c-format
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""
"Lancia comandi programmati dal comando at al momento specificato quando\n"
"at è stato lanciato, e lancia comandi batch quando il carico medio è\n"
"sufficientemente basso."

#: ../../services.pm:1
#, c-format
msgid ""
"apmd is used for monitoring battery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd è usato per monitorare lo stato delle batterie e fare il log tramite\n"
"syslog. Può anche essere usato per spegnere la macchina quando la batteria\n"
"è scarica."

#: ../../services.pm:1
#, c-format
msgid "Anacron is a periodic command scheduler."
msgstr "Anacron, un gestore di comandi periodici."

#: ../../services.pm:1
#, c-format
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr "Lancia il sistema audio ALSA (Advanced Linux Sound Architecture)"

#: ../../standalone.pm:1
#, c-format
msgid "Installing packages..."
msgstr "Installazione dei pacchetti ..."

#: ../../standalone.pm:1
#, c-format
msgid ""
"\n"
"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "
msgstr ""

#: ../../standalone.pm:1
#, c-format
msgid ""
" [everything]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake resolution"
msgstr ""

#: ../../standalone.pm:1
#, c-format
msgid ""
"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=dev]"
msgstr ""

#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTION]...\n"
"  --no-confirmation      don't ask first confirmation question in "
"MandrakeUpdate mode\n"
"  --no-verify-rpm        don't verify packages signatures\n"
"  --changelog-first      display changelog before filelist in the "
"description window\n"
"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
msgstr ""

#: ../../standalone.pm:1
#, c-format
msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""

#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTIONS]\n"
"Network & Internet connection and monitoring application\n"
"\n"
"--defaultintf interface : show this interface by default\n"
"--connect : connect to internet if not already connected\n"
"--disconnect : disconnect to internet if already connected\n"
"--force : used with (dis)connect : force (dis)connection.\n"
"--status : returns 1 if connected 0 otherwise, then exit.\n"
"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""

#: ../../standalone.pm:1
#, c-format
msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""

#: ../../standalone.pm:1
#, c-format
msgid "[keyboard]"
msgstr "[tastiera]"

#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTIONS]...\n"
"Mandrake Terminal Server Configurator\n"
"--enable         : enable MTS\n"
"--disable        : disable MTS\n"
"--start          : start MTS\n"
"--stop           : stop MTS\n"
"--adduser        : add an existing system user to MTS (requires username)\n"
"--deluser        : delete an existing system user from MTS (requires "
"username)\n"
"--addclient      : add a client machine to MTS (requires MAC address, IP, "
"nbi image name)\n"
"--delclient      : delete a client machine from MTS (requires MAC address, "
"IP, nbi image name)"
msgstr ""

#: ../../standalone.pm:1
#, c-format
msgid ""
"Font Importation and monitoring "
"application                                     \n"
"--windows_import : import from all available windows partitions.\n"
"--xls_fonts      : show all fonts that already exist from xls\n"
"--strong         : strong verification of font.\n"
"--install        : accept any font file and any directry.\n"
"--uninstall      : uninstall any font or any directory of font.\n"
"--replace        : replace all font if already exist\n"
"--application    : 0 none application.\n"
"                 : 1 all application available supported.\n"
"                 : name_of_application like  so for staroffice \n"
"                 : and gs for ghostscript for only this one."
msgstr ""

#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPTIONS:\n"
"  --help            - print this help message.\n"
"  --report          - program should be one of mandrake tools\n"
"  --incident        - program should be one of mandrake tools"
msgstr ""

#: ../../standalone.pm:1
#, c-format
msgid ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Backup and Restore application\n"
"\n"
"--default             : save default directories.\n"
"--debug               : show all debug messages.\n"
"--show-conf           : list of files or directories to backup.\n"
"--config-info         : explain configuration file options (for non-X "
"users).\n"
"--daemon              : use daemon configuration. \n"
"--help                : show this message.\n"
"--version             : show version number.\n"
msgstr ""

#: ../../standalone.pm:1
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2, or (at your option)\n"
"any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""

#: ../../steps.pm:1
#, c-format
msgid "Exit install"
msgstr "Termina installazione"

#: ../../steps.pm:1
#, c-format
msgid "Install updates"
msgstr "Installa aggiornamenti"

#: ../../steps.pm:1
#, c-format
msgid "Configure services"
msgstr "Configura servizi"

#: ../../steps.pm:1
#, c-format
msgid "Configure X"
msgstr "Configura X"

#: ../../steps.pm:1
#, c-format
msgid "Install bootloader"
msgstr "Installa bootloader"

#: ../../steps.pm:1
#, c-format
msgid "Configure networking"
msgstr "Configura rete"

#: ../../steps.pm:1
#, c-format
msgid "Add a user"
msgstr "Aggiungi un utente"

#: ../../steps.pm:1
#, fuzzy, c-format
msgid "Root password"
msgstr "Nessuna password"

#: ../../steps.pm:1
#, c-format
msgid "Install system"
msgstr "Installa sistema"

#: ../../steps.pm:1
#, c-format
msgid "Choose packages to install"
msgstr "Pacchetti da installare"

#: ../../steps.pm:1
#, c-format
msgid "Format partitions"
msgstr "Formatta partizioni"

#: ../../steps.pm:1
#, fuzzy, c-format
msgid "Partitioning"
msgstr "Stampa"

#: ../../steps.pm:1
#, c-format
msgid "Choose your keyboard"
msgstr "Scegli la tastiera"

#: ../../steps.pm:1
#, c-format
msgid "Select installation class"
msgstr "Classe d'installazione"

#: ../../steps.pm:1
#, c-format
msgid "Hard drive detection"
msgstr "Ricerca del disco fisso"

#: ../../steps.pm:1
#, c-format
msgid "Configure mouse"
msgstr "Configura mouse"

#: ../../steps.pm:1
#, c-format
msgid "License"
msgstr ""

#: ../../steps.pm:1
#, c-format
msgid "Language"
msgstr "Scegli la lingua"

#: ../../ugtk2.pm:1
#, c-format
msgid "utopia 25"
msgstr ""

#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
msgid "OK"
msgstr "OK"

#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
msgid "logdrake"
msgstr "logdrake"

#: ../../ugtk.pm:1
#, c-format
msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Xpmac (installation display driver)"
msgstr "Xpmac (installazione driver video)"

#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Questa scheda ha il supporto per accelerazione 3D hardware con XFree %s.\n"
"NB: È UN SUPPORTO SPERIMENTALE E POTREBBE BLOCCARE IL COMPUTER."

#: ../../Xconfig/card.pm:1
#, c-format
msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "XFree %s con accelerazione 3D hardware SPERIMENTALE"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr ""
"Questa scheda ha il supporto per accelerazione 3D hardware con XFree %s."

#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
msgid "XFree %s with 3D hardware acceleration"
msgstr "XFree %s con accelerazione 3D hardware"

#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Questa scheda ha il supporto per accelerazione 3D hardware, ma solo con "
"XFree %s.\n"
"NB: È UN SUPPORTO SPERIMENTALE E POTREBBE BLOCCARE IL COMPUTER.\n"
"La scheda è supportata anche da XFree %s, che potrebbe gestire meglio il 2D."

#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Questa scheda ha il supporto per accelerazione 3D hardware, ma solo con "
"XFree %s.\n"
"La scheda è supportata anche da XFree %s, che potrebbe gestire meglio il 2D."

#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
msgid "XFree %s"
msgstr "XFree %s"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "Configurare solo la scheda \"%s\"%s"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Use Xinerama extension"
msgstr "Usare l'estensione Xinerama"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Configure all heads independently"
msgstr "Configurare tutte le testine indipendentemente"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Which configuration of XFree do you want to have?"
msgstr "Che configurazione di XFree si desidera avere?"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "XFree configuration"
msgstr "Configurazione di XFree"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "Indica la quantità di memoria della scheda grafica"

#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"Il sistema supporta la configurazione di più testine.\n"
"Cosa devo fare?"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Multi-head configuration"
msgstr "Configurazione multi-testine"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Choose an X server"
msgstr "Scegliere un server X"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "X server"
msgstr "Server X"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "64 MB or more"
msgstr "64 MB o più"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "32 MB"
msgstr "32 MB"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "16 MB"
msgstr "16 MB"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "8 MB"
msgstr "8 MB"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "4 MB"
msgstr "4 MB"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "2 MB"
msgstr "2 MB"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "1 MB"
msgstr "1 MB"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "512 kB"
msgstr "512 kB"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "256 kB"
msgstr "256 kB"

#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"Conservo le modifiche apportate?\n"
"La configurazione attuale è:\n"
"\n"
"%s"

#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Options"
msgstr "Opzioni"

#: ../../Xconfig/main.pm:1
#, c-format
msgid "Test"
msgstr "Prova"

#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Resolution"
msgstr "Risoluzione"

#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
msgid "Monitor"
msgstr "Monitor"

#: ../../Xconfig/main.pm:1
#, c-format
msgid "Graphic Card"
msgstr "Scheda grafica"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Vertical refresh rate"
msgstr "Frequenza di refresh verticale"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Horizontal refresh rate"
msgstr "Frequenza di refresh orizzontale"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"I due parametri critici sono la frequenza di refresh verticale, che è la "
"frequenza\n"
"con cui l'intero schermo è aggiornato, e ancora più importante la frequenza\n"
"di sincronia orizzontale, che è la frequenza con cui le linee di scansione "
"sono mostrate. \n"
"\n"
"È MOLTO IMPORTANTE non indicare un tipo di monitor con una gamma di\n"
"sincronia superiore alle capacità del monitor usato: lo si potrebbe "
"danneggiare.\n"
"Nel dubbio, occorre scegliere un'impostazione prudenziale."

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr ""
"Il rilevamento Plug'n Play non è riuscito. Occorre scegliere un monitor "
"preciso."

#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Vendor"
msgstr "Marca"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Plug'n Play"
msgstr "Plug'n Play"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Choose a monitor"
msgstr "Scegliere un monitor"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Graphics card: %s"
msgstr "Scheda grafica: %s"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "Scelta di risoluzione e profondità di colore"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Resolutions"
msgstr "Risoluzioni"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "4 billion colors (32 bits)"
msgstr "4 miliardi di colori (32 bit)"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 milioni di colori (24 bit)"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65 mila colori (16 bit)"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32 mila colori (15 bit)"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 colori (8 bit)"

#: ../../Xconfig/test.pm:1
#, fuzzy, c-format
msgid "Is this the correct setting?"
msgstr "È corretto?"

#: ../../Xconfig/test.pm:1
#, fuzzy, c-format
msgid "Leaving in %d seconds"
msgstr "%d secondi"

#: ../../Xconfig/test.pm:1
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""

#: ../../Xconfig/test.pm:1
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "Attenzione: il test di questa scheda video può bloccare il computer"

#: ../../Xconfig/test.pm:1
#, c-format
msgid "Do you want to test the configuration?"
msgstr "Vuoi provare la configurazione?"

#: ../../Xconfig/test.pm:1
#, c-format
msgid "Test of the configuration"
msgstr "Test della configurazione"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "What norm is your TV using?"
msgstr "Che normativa viene utilizzata per la TV?"

#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
"La scheda grafica sembra disporre di un connettore TV-OUT.\n"
"Può essere configurata per funzionare usando il frame-buffer.\n"
"\n"
"A tal fine occorre connettere la scheda grafica ad un televisore prima di "
"avviare il computer.\n"
"Poi si sceglie l'opzione \"TVout\" durante il caricamento del sistema.\n"
"\n"
"È attiva questa funzione?"

#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(XFree) upon booting.\n"
"Would you like XFree to start when you reboot?"
msgstr ""
"Posso configurare il computer per avviarlo direttamente in modo grafico "
"(XFree).\n"
"Si vuole che XFree venga eseguito al riavvio?"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Graphical interface at startup"
msgstr "Avvio con interfaccia grafica"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "XFree86 driver: %s\n"
msgstr "Driver XFree86: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "XFree86 server: %s\n"
msgstr "Server XFree86: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Resolution: %s\n"
msgstr "Risoluzione: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Color depth: %s\n"
msgstr "Profondità di colore: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "Memoria scheda grafica: %s KB\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Graphics card: %s\n"
msgstr "Scheda grafica: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Refresh verticale del monitor: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Frequenza orizzontale del monitor: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Monitor: %s\n"
msgstr "Monitor: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Mouse device: %s\n"
msgstr "Dispositivo del mouse: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Mouse type: %s\n"
msgstr "Tipo di mouse: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Tipo di tastiera: %s\n"

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Options: %s"
msgstr "Opzioni: %s"

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Mount point: "
msgstr "Punto di mount:"

#: ../../diskdrake/dav.pm:1
#, c-format
msgid "Server: "
msgstr "Server:"

#: ../../diskdrake/dav.pm:1
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "L'URL deve iniziare con http:// o https://"

#: ../../diskdrake/dav.pm:1
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "Per favore, insersci l'URL del server WebDAV"

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Mount point"
msgstr "Punto di mount"

#: ../../diskdrake/dav.pm:1
#, c-format
msgid "Server"
msgstr "Server"

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Mount"
msgstr "Esegui mount"

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Unmount"
msgstr "Esegui unmount"

#: ../../diskdrake/dav.pm:1
#, c-format
msgid "New"
msgstr "Nuovo"

#: ../../diskdrake/dav.pm:1
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
"WebDAV è un protocollo che permette montare localmente una directory\n"
"del server web, e di trattarla come un file system locale (purché il web\n"
"server sia configurato come server WebDAV). Si si vuole aggiungere dei\n"
"punti di mount WebDAV, basta selezionare  \"Nuovo\"."

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Use ``%s'' instead"
msgstr "Usare, invece, \"%s\""

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Type"
msgstr "Tipo"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Use ``Unmount'' first"
msgstr "Prima usa \"Unmount\""

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Delete"
msgstr "Cancellare"

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Create"
msgstr "Creare"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Filesystem types:"
msgstr "Tipi di filesystem:"

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Empty"
msgstr "Vuoto"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Windows"
msgstr "Windows"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "HFS"
msgstr "HFS"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "SunOS"
msgstr "SunOS"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Swap"
msgstr "Swap"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Journalised FS"
msgstr "FS con journal"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Ext2"
msgstr "Ext2"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "No hard drives found"
msgstr "Non ho trovato nessun disco fisso"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Please click on a partition"
msgstr "Fare clic su una partizione"

#: ../../diskdrake/hd_gtk.pm:1
#, fuzzy, c-format
msgid ""
"You have one big MicroSoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"C'è una grossa partizione FAT\n"
"(generalmente usata da Microsoft Dos/Windows).\n"
"Si suggerisce di ridimensionarla\n"
"(fare clic su di essa e poi su \"Ridimensiona\")"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Choose action"
msgstr "Scegliere un'azione"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Wizard"
msgstr "Assistente"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid ""
"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Se si intende usare aboot, stare attenti a lasciare uno spazio libero\n"
" (2048 settori sono sufficienti) all'inizio del disco"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Please make a backup of your data first"
msgstr "Si consiglia di effettuare prima un backup dei propri dati"

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Read carefully!"
msgstr "Leggere con attenzione!"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Encryption key (again)"
msgstr "Chiave di crittazione (conferma)"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Encryption key"
msgstr "Chiave di crittazione"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "The encryption keys do not match"
msgstr "Le chiavi di crittazione non corrispondono"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
"Questa chiave di crittazione è troppo semplice (deve essere lunga almeno %d "
"caratteri)"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "Scegliere la chiave di crittazione del filesystem"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Filesystem encryption key"
msgstr "Chiave di crittazione del filesystem"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Type: "
msgstr "Tipo: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "on channel %d id %d\n"
msgstr "sul canale %d id %d\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Partition table type: %s\n"
msgstr "Tipo tabella delle partizioni: %s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "LVM-disks %s\n"
msgstr "Dischi LVM %s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Info: "
msgstr "Informazioni: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Geometria: %s cilindri, %s testine, %s settori\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Size: %s\n"
msgstr "Dimensione: %s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Read-only"
msgstr "Solo lettura"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Device: "
msgstr "Dispositivo: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"Questa speciale partizione di boot\n"
"viene utilizzata per effettuare\n"
"il dual-boot del sistema.\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"Molto probabilmente questa partizione è\n"
"una partizione Driver, è meglio\n"
"non toccarla.\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Loopback file name: %s"
msgstr "Nome file di loopback: %s"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "RAID-disks %s\n"
msgstr "Dischi RAID %s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Chunk size %s\n"
msgstr "Dimensione del blocco %s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Level %s\n"
msgstr "Livello %s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Partizione di boot predefinita\n"
"    (per boot MS-DOS, non per lilo)\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr ""
"File di loopback:\n"
"   %s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "RAID md%s\n"
msgstr "RAID md%s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Mounted\n"
msgstr "Montato\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Not formatted\n"
msgstr "Non formattato\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Formatted\n"
msgstr "Formattato\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "Da cilindro %d a %d\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ", %s sectors"
msgstr ", %s settori"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Size: %s"
msgstr "Dimensione: %s"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Start: sector %s\n"
msgstr "Inizio: settore %s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Name: "
msgstr "Nome: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "Lettera di drive DOS: %s (solo una supposizione)\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "partition %s is now known as %s"
msgstr "la partizione %s adesso è nota come %s"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Removing %s"
msgstr "Sto cancellando: %s"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Copying %s"
msgstr "Sto copiando %s"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Moving files to the new partition"
msgstr "Sto spostando i file sulla nuova partizione"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"La directory %s contiene già dei dati\n"
"(%s)"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Hide files"
msgstr "Nascondi i file"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Move files to the new partition"
msgstr "Sposta i file sulla nuova partizione"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
"Dopo aver formattato la partizione %s, tutti i dati su questa partizione "
"saranno persi"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr ""
"Sarà necessario riavviare il sistema prima che le modifiche diventino "
"effettive!"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "La tabella delle partizioni di %s sta per essere scritta su disco!"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "The package %s is needed. Install it?"
msgstr "Il pacchetto %s è necessario. Lo installo?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "What type of partitioning?"
msgstr "Che tipo di partizionamento?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "Attenzione: questa operazione è pericolosa."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "chunk size"
msgstr "dimensione del blocco"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "level"
msgstr "livello"

#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
msgid "device"
msgstr "dispositivo"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Various"
msgstr "Varie"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Mount options"
msgstr "Opzioni di mount"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "File already exists. Use it?"
msgstr "Il file esiste già. Lo uso?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "File già usato da un altro loopback, si deve selezionarne un altro"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Give a file name"
msgstr "Assegna un nome di file"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Filesystem type: "
msgstr "Tipo di filesystem: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Size in MB: "
msgstr "Dimensione in Mb: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Loopback file name: "
msgstr "Nome file loopback: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Loopback"
msgstr "Loopback"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "This partition can't be used for loopback"
msgstr "Questa partizione non può essere usata per il loopback"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "LVM name?"
msgstr "Nome LVM?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "new"
msgstr "nuovo"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "Scegliere un LVM esistente a cui effettuare l'aggiunta"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "Scegliere un RAID esistente a cui effettuare l'aggiunta"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Moving partition..."
msgstr "Spostamento partizione..."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Moving"
msgstr "Spostamento"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Which sector do you want to move it to?"
msgstr "Su quale settore va spostata?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Sector"
msgstr "Settore"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Which disk do you want to move it to?"
msgstr "Su quale disco deve essere spostata?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Move"
msgstr "Sposta"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "New size in MB: "
msgstr "Nuova dimensione in Mb: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose the new size"
msgstr "Scegliere la nuova dimensione"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Resize"
msgstr "Ridimensiona"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr ""
"Dopo aver ridimensionato la partizione %s, tutti i dati su questa partizione "
"saranno persi"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "All data on this partition should be backed-up"
msgstr ""
"È meglio fare una copia di riserva di tutti i dati su questa partizione"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "This partition is not resizeable"
msgstr "Questa partizione non è ridimensionabile"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "Calcolo dei limiti del filesystem FAT"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Where do you want to mount %s?"
msgstr "Dove devo montare  %s?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Non si può deselezionare questo punto di mount perché la partizione\n"
"è usata per il loopback. Bisogna, prima, rimuovere il loopback"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Dove devo montare il dispositivo %s?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "Dove devo montare il file loopback %s?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "Passo da ext2 a ext3"

#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
msgid "Which filesystem do you want?"
msgstr "Che filesystem uso?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Change partition type"
msgstr "Cambia il tipo di partizione"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"Dopo aver cambiato il tipo della partizione %s, tutti i dati su questa "
"partizione saranno persi"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Remove the loopback file?"
msgstr "Rimuovo il file di loopback?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"You can't create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"Non si può creare una nuova partizione\n"
"(è stato raggiunto il numero massimo di partizioni primarie).\n"
"Occorre prima eliminare una partizione primaria e crearne una estesa."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Preference: "
msgstr "Preferenza: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Start sector: "
msgstr "Settore iniziale: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Create a new partition"
msgstr "Crea una nuova partizione"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Use for loopback"
msgstr "Usa per loopback"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Modify RAID"
msgstr "Modifica RAID"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Remove from LVM"
msgstr "Rimuovi da LVM"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Remove from RAID"
msgstr "Rimuovi da RAID"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Add to LVM"
msgstr "Aggiungi a LVM"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Add to RAID"
msgstr "Aggiungi a RAID"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Format"
msgstr "Formatta"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Detailed information"
msgstr "Informazioni dettagliate"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Trying to rescue partition table"
msgstr "Provo a recuperare la tabella delle partizioni"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"Inserire un floppy nel drive\n"
"Tutti i dati su questo floppy saranno persi"

#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
#: ../../network/modem.pm:1
#, c-format
msgid "Warning"
msgstr "Attenzione"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Select file"
msgstr "Scegli file"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"La tabella delle partizioni nella copia di sicurezza\n"
"non ha la stessa dimensione del disco fisso.\n"
"Continuo lo stesso?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Removable media automounting"
msgstr "Automounting di supporti rimovibili"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Reload partition table"
msgstr "Ricarica tabella delle partizioni"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Rescue partition table"
msgstr "Recupera tabella delle partizioni"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Restore partition table"
msgstr "Ripristina tabella delle partizioni"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Save partition table"
msgstr "Salva la tabella delle partizioni"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Per avere altre partizioni, serve eliminarne una per essere in grado di "
"crearne una estesa"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "I can't add any more partition"
msgstr "Non posso aggiungere altre partizioni"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "All primary partitions are used"
msgstr "Tutte le partizioni primarie sono in uso"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Hard drive information"
msgstr "Informazioni sul disco fisso"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Auto allocate"
msgstr "Partizionare automaticamente"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Clear all"
msgstr "Azzerare tutto"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "Devo salvare le modifiche a /etc/fstab?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Quit without writing the partition table?"
msgstr "Devo uscire senza scrivere la tabella delle partizioni?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Quit without saving"
msgstr "Esci senza salvare"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Continue anyway?"
msgstr "Continuo comunque?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Toggle to expert mode"
msgstr "Passare a modo esperto"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Toggle to normal mode"
msgstr "Passare a modo normale"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Undo"
msgstr "Un passo indietro"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Exit"
msgstr "Esci"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose a partition"
msgstr "Scegliere una partizione"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose another partition"
msgstr "Scegliere un'altra partizione"

#: ../../diskdrake/removable.pm:1
#, c-format
msgid "Change type"
msgstr "Cambia tipo"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Search servers"
msgstr "Ricerca server"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Domain"
msgstr "Dominio"

#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Username"
msgstr "Nome utente"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""
"Per favore digitare il proprio nome utente, la password e il nome di "
"dominio\n"
"per poter accedere a questo host."

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Domain Authentication Required"
msgstr "Richiesta autenticazione del dominio"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Another one"
msgstr "Un'altra"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Which username"
msgstr "Quale nome utente"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Can't login using username %s (bad password?)"
msgstr "Impossibile effettuare il login con il nome %s (password errata?)"

#: ../../harddrake/data.pm:1
#, c-format
msgid "cpu # "
msgstr ""

#: ../../harddrake/data.pm:1
#, c-format
msgid "SMBus controllers"
msgstr ""

#: ../../harddrake/data.pm:1
#, c-format
msgid "USB controllers"
msgstr ""

#: ../../harddrake/data.pm:1
#, c-format
msgid "SCSI controllers"
msgstr ""

#: ../../harddrake/data.pm:1
#, c-format
msgid "Firewire controllers"
msgstr ""

#: ../../harddrake/data.pm:1
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr ""

#: ../../harddrake/data.pm:1
#, c-format
msgid "Joystick"
msgstr ""

#: ../../harddrake/data.pm:1
#, fuzzy, c-format
msgid "Scanner"
msgstr "Scegliete uno scanner"

#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "Unknown/Others"
msgstr "Sconosciuto|Generico"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Bridges and system controllers"
msgstr ""

#: ../../harddrake/data.pm:1
#, fuzzy, c-format
msgid "Modem"
msgstr "Modello"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Ethernetcard"
msgstr "Scheda ethernet"

#: ../../harddrake/data.pm:1
#, fuzzy, c-format
msgid "Processors"
msgstr "ID processore"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Webcam"
msgstr ""

#: ../../harddrake/data.pm:1
#, c-format
msgid "Soundcard"
msgstr "Scheda audio"

#: ../../harddrake/data.pm:1
#, fuzzy, c-format
msgid "Other MultiMedia devices"
msgstr "Altri supporti"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Tvcard"
msgstr "Scheda TV"

#: ../../harddrake/data.pm:1
#, fuzzy, c-format
msgid "Videocard"
msgstr "Modo video"

#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Tape"
msgstr "Tipo"

#: ../../harddrake/data.pm:1
#, c-format
msgid "DVD-ROM"
msgstr ""

#: ../../harddrake/data.pm:1
#, c-format
msgid "CD/DVD burners"
msgstr ""

#: ../../harddrake/data.pm:1
#, fuzzy, c-format
msgid "CDROM"
msgstr "\t-CDROM.\n"

#: ../../harddrake/data.pm:1
#, fuzzy, c-format
msgid "Disk"
msgstr "Danese"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Zip"
msgstr ""

#: ../../harddrake/data.pm:1
#, c-format
msgid "Floppy"
msgstr "Floppy"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Let me pick any driver"
msgstr ""

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Driver:"
msgstr "Driver:"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Choosing an arbitratry driver"
msgstr ""

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Sound trouble shooting"
msgstr ""

#: ../../harddrake/sound.pm:1
#, fuzzy, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr "Non esistono driver conosciuti per questa scheda audio (%s)"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Unkown driver"
msgstr "Driver sconosciuto"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr "Non esistono driver conosciuti per questa scheda audio (%s)"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "No known driver"
msgstr "Nessun driver conosciuto"

#: ../../harddrake/sound.pm:1
#, fuzzy, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
"Non c'è nessun altro driver OSS/ALSA conosciuto per questa scheda audio(%s), "
"che attualmente usa \"%s\""

#: ../../harddrake/sound.pm:1
#, fuzzy, c-format
msgid "No open source driver"
msgstr "Nessun driver conosciuto"

#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "Attendere, prego ... sto applicando la configurazione"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
"Il vecchio driver \"%s \" è sulla lista nera.\n"
"\n"
"Sono stati riferiti dei problemi con il kernel quando viene fermato.\n"
"\n"
"Il nuovo driver \"%s\"sarà utilizzabile solo dopo il prossimo riavvio."

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Trouble shooting"
msgstr ""

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independant "
"sound API (it's available on most unices systems) but it's a very basic and "
"limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""
"OSS (Open Sound System) è stata la prima API audio. È indipendente dal S.O. "
"(è disponibile per la maggior parte degli Unix) ma è un'API molto elementare "
"e limitata.\n"
"Per sovrappiù, tutti i drivers OSS reinventano la ruota.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) è un'architettura modularizzata\n"
"che supporta un ampio spettro di schede ISA, USB e PCI.\n"
"\n"
"Inoltre, fornisce un'API di livello molto più alto rispetto a OSS.\n"
"\n"
"Per usare alsa, si può scegliere tra usare:\n"
"- la vecchia API con compatibilità OSSi\n"
"- la nuova API di ALSA che fornisce funzionalità molto più avanzate, ma che "
"richiede l'utilizzo della libreria ALSA.\n"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""
"\n"
"\n"
"La scheda ora utilizza il driver %s \"%s\" (il driver predefinitoera \"%s\")"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""
"Qui è possibile scegliere un driver alternativo (OSS o ALSA) per la scheda "
"audio (%s)."

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Sound configuration"
msgstr "Configurazione dell'audio"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""
"Non c'è nessun altro driver OSS/ALSA conosciuto per questa scheda audio(%s), "
"che attualmente usa \"%s\""

#: ../../harddrake/sound.pm:1
#, c-format
msgid "No alternative driver"
msgstr "Non c'è un driver alternativo"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "enable radio support"
msgstr "abilita il supporto radio"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Radio support:"
msgstr "Supporto radio:"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "PLL setting:"
msgstr "Impostazioni PLL:"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr "numero dei buffer di cattura per una cattura di tipo mmap"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Number of capture buffers:"
msgstr "Numero dei buffer di cattura:"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Tuner type:"
msgstr "Tipo di sintonizzatore:"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Card model:"
msgstr "Tipo di scheda:"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
"Per la maggior parte delle schede di sintonizzia TV recenti, il modulo bttv "
"del kernel GNU/Linux si limita\n"
"ad identificare automaticamente i parametri corretti. Se la vostra scheda "
"non è stata identificata correttamente, potete indicare il tipo giusto di "
"scheda e sintonizzatore qui. Dovete solo selezionare i parametri della "
"vostra scheda TV se necessario."

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Unknown|Generic"
msgstr "Sconosciuto|Generico"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr "Sconosciuto|CPH05X (bt878) [molti produttori]"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr "Sconosciuto|CPH05X (bt878) [molte marche]"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Auto-detect"
msgstr "Riconoscimento automatico"

#: ../../interactive/newt.pm:1
#, fuzzy, c-format
msgid "Do"
msgstr "Fatto"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Your choice? (default %s) "
msgstr "La tua scelta? (default %s) "

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Bad choice, try again\n"
msgstr "Scelta errata, prova di nuovo\n"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Re-submit"
msgstr "Riproporre"

#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""
"=> Attenzione, un'etichetta è cambiata:\n"
"%s"

#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""
"Per favore scegliete il primo numero dell'intervallo di 10 che desiderate\n"
"modificare, oppure premete Invio per continuare.\n"
"La vostra scelta?"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr "=> Ci sono molte cose fra cui scegliere (%s)\n"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "La tua scelta? (default \"%s\"%s) "

#: ../../interactive/stdio.pm:1
#, c-format
msgid " enter `void' for void entry"
msgstr ""

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Do you want to click on this button?"
msgstr "Vuoi cliccare su questo pulsante?"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Button `%s': %s"
msgstr "Pulsante \"%s\": %s"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr "La tua scelta? (0/1, default \"%s\") "

#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""
"Entrate che dovrete riempire:\n"
"%s"

#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"Caricamento del modulo %s fallito.\n"
"Si vuole riprovare con altri parametri?"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Specify options"
msgstr "Specificare opzioni"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Autoprobe"
msgstr "Rilevamento automatico"

#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without them. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"Talvolta, il driver %s richiede informazioni extra per funzionare \n"
"correttamente, anche se normalmente può farne a meno. Si desidera\n"
"fornire le opzioni extra o lasciare che il driver esamini la macchina per\n"
"ottenere le informazioni di cui ha bisogno? In certi casi, la ricerca può\n"
"bloccare il computer, ma non dovrebbe causare alcun danno."

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: ../../modules/interactive.pm:1
#, c-format
msgid "Which %s driver should I try?"
msgstr "Quale driver %s deve essere provato?"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Module options:"
msgstr "Opzioni del modulo:"

#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"Adesso si possono fornire delle opzioni per il modulo %s.\n"
"Le opzioni sono nel formato \"nome=valore nome2=valore2 ...\".\n"
"Per esempio, \"io=0x300 irq=7\""

#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
"Adesso si possono fornire delle opzioni per il modulo %s.\n"
"Si noti che ogni indirizzo dovrebbe essere inserito con il prefisso 0x (ad "
"es.\"0x123\")."

#: ../../modules/interactive.pm:1
#, c-format
msgid "(module %s)"
msgstr "(modulo %s)"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: ../../modules/interactive.pm:1
#, c-format
msgid "Installing driver for %s card %s"
msgstr "Installazione driver per scheda %s %s"

#: ../../modules/interactive.pm:1
#, c-format
msgid "See hardware info"
msgstr "Vedere le informazioni hardware"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "Ci sono delle interfacce %s?"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Do you have another one?"
msgstr "Ce ne sono altre?"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Found %s %s interfaces"
msgstr "Trovate %s interfacce %s"

#: ../../modules/interactive.pm:1
#, c-format
msgid "You can configure each parameter of the module here."
msgstr ""

#: ../../modules/parameters.pm:1
#, c-format
msgid "comma separated strings"
msgstr "stringhe separate da virgole"

#: ../../modules/parameters.pm:1
#, c-format
msgid "comma separated numbers"
msgstr ""

#: ../../modules/parameters.pm:1
#, c-format
msgid "%d comma separated strings"
msgstr ""

#: ../../modules/parameters.pm:1
#, c-format
msgid "%d comma separated numbers"
msgstr ""

#: ../../modules/parameters.pm:1
#, c-format
msgid "a number"
msgstr "un numero"

#: ../../network/adsl.pm:1
#, c-format
msgid ""
"You need the alcatel microcode.\n"
"Download it at\n"
"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""

#: ../../network/adsl.pm:1
#, c-format
msgid ""
"The most common way to connect with adsl is pppoe.\n"
"Some connections use pptp, a few use dhcp.\n"
"If you don't know, choose 'use pppoe'"
msgstr ""
"Il modo più comune per connettersi con adsl è pppoe.\n"
"Alcune connessioni usano pptp, poche usano dhcp.\n"
"Se non sai, scegli \"usa pppoe\"."

#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
msgid "Connect to the Internet"
msgstr "Connetti ad Internet"

#: ../../network/adsl.pm:1
#, c-format
msgid "Sagem (using pppoa) usb"
msgstr ""

#: ../../network/adsl.pm:1
#, c-format
msgid "Alcatel speedtouch usb"
msgstr "Alcatel speedtouch USB"

#: ../../network/adsl.pm:1
#, c-format
msgid "use dhcp"
msgstr "usa dhcp"

#: ../../network/adsl.pm:1
#, c-format
msgid "use pptp"
msgstr "usa pptp"

#: ../../network/adsl.pm:1
#, c-format
msgid "use pppoe"
msgstr "usa pppoe"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Other ports"
msgstr "Altre porte"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Everything (no firewall)"
msgstr ""

#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535."
msgstr ""

#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
"You can enter miscellaneous ports. \n"
"Valid examples are: 139/tcp 139/udp.\n"
"Have a look at /etc/services for information."
msgstr ""

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Which services would you like to allow the Internet to connect to?"
msgstr ""

#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"Make sure you have configured your Network/Internet access with\n"
"drakconnect before going any further."
msgstr ""

#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandrake Linux machine.\n"
"For a powerful and dedicated firewall solution, please look to the\n"
"specialized MandrakeSecurity Firewall distribution."
msgstr ""
"Configuratore di firewall minimo\n"
"\n"
"Configurazione di un firewall personale per questo sistema Mandrake Linux.\n"
"Per una soluzione firewall potente e dedicata, per favore rivolgiti\n"
"alla distribuzione specializzata MandrakeSecurity Firewall."

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "No network card"
msgstr "Nessuna scheda di rete"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "POP and IMAP Server"
msgstr "Server POP e IMAP"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Mail Server"
msgstr "Server di posta"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Domain Name Server"
msgstr "Domain Name Server"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Web Server"
msgstr "Server web"

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid "Zeroconf host name must not contain a ."
msgstr ""

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid "Host name"
msgstr "Nome host"

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, fuzzy, c-format
msgid "Zeroconf Host name"
msgstr "Nome host"

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid ""
"\n"
"\n"
"Enter a Zeroconf host name without any dot if you don't\n"
"want to use the default host name."
msgstr ""

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid "Configuring network"
msgstr "Sto configurando la rete"

#: ../../network/ethernet.pm:1
#, c-format
msgid "no network card found"
msgstr "nessuna scheda di rete trovata"

#: ../../network/ethernet.pm:1
#, c-format
msgid ""
"Please choose which network adapter you want to use to connect to Internet."
msgstr ""
"Per favore scegli quale adattatore di rete vuoi usare per connetterti a "
"Internet"

#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
#: ../../standalone/drakpxe:1
#, c-format
msgid "Choose the network interface"
msgstr "Scegli l'interfaccia di rete"

#: ../../network/ethernet.pm:1
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system.\n"
"I cannot set up this connection type."
msgstr ""
"Nessun adattatore di rete ethernet è stato rilevato nel tuo sistema.\n"
"Non posso configurare questo tipo di connessione."

#: ../../network/ethernet.pm:1
#, c-format
msgid ""
"Which dhcp client do you want to use?\n"
"Default is dhcp-client."
msgstr ""
"Quale client dhcp devo usare?\n"
"Quello predefinito è dhcp"

#: ../../network/isdn.pm:1
#, c-format
msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr ""
"Non trovo nessuna scheda ISDN PCI. Per favore selezionane una \n"
"nella prossima schermata."

#: ../../network/isdn.pm:1
#, c-format
msgid ""
"I have detected an ISDN PCI card, but I don't know its type. Please select a "
"PCI card on the next screen."
msgstr ""
"Ho trovato una scheda ISDN PCI, ma non so di che tipo. Per favore seleziona "
"una scheda PCI nella prossima schermata."

#: ../../network/isdn.pm:1
#, fuzzy, c-format
msgid "Which of the following is your ISDN card?"
msgstr "Qual'è la tua scheda ISDN?"

#: ../../network/isdn.pm:1
#, c-format
msgid "ISDN Configuration"
msgstr "Configurazione ISDN"

#: ../../network/isdn.pm:1
#, c-format
msgid "Abort"
msgstr "Annulla"

#: ../../network/isdn.pm:1
#, c-format
msgid "Continue"
msgstr "Continua"

#: ../../network/isdn.pm:1
#, c-format
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
"card.\n"
msgstr ""
"\n"
"Se hai una scheda ISA, i valori nella prossima schermata dovrebbero essere "
"giusti.\n"
"\n"
"Se hai una scheda PCMCIA, devi sapere IRQ e I/O della tua scheda.\n"

#: ../../network/isdn.pm:1
#, c-format
msgid "I don't know"
msgstr "Non so"

#: ../../network/isdn.pm:1
#, c-format
msgid "PCI"
msgstr "PCI"

#: ../../network/isdn.pm:1
#, c-format
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: ../../network/isdn.pm:1
#, c-format
msgid "What kind of card do you have?"
msgstr "Che tipo di scheda hai?"

#: ../../network/isdn.pm:1
#, c-format
msgid "Found \"%s\" interface do you want to use it ?"
msgstr "Trovata un'interfaccia \"%s\", si vuole utilizzarla?"

#: ../../network/isdn.pm:1
#, c-format
msgid "Which protocol do you want to use?"
msgstr "Quale protocollo vuoi usare?"

#: ../../network/isdn.pm:1
#, c-format
msgid "Protocol for the rest of the world"
msgstr "Protocollo per il resto del mondo"

#: ../../network/isdn.pm:1
#, c-format
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr ""
"Protocollo per il resto del mondo \n"
" no D-Channel (linee in affitto)"

#: ../../network/isdn.pm:1
#, c-format
msgid "European protocol"
msgstr "Protocollo per l'Europa"

#: ../../network/isdn.pm:1
#, c-format
msgid "European protocol (EDSS1)"
msgstr "Protocollo per l'Europa (EDSS1)"

#: ../../network/isdn.pm:1
#, c-format
msgid ""
"Select your provider.\n"
"If it isn't listed, choose Unlisted."
msgstr ""
"Scegli il tuo provider.\n"
" Se non è nella lista, scegli Fuori Lista"

#: ../../network/isdn.pm:1
#, c-format
msgid "External ISDN modem"
msgstr "Modem ISDN esterno"

#: ../../network/isdn.pm:1
#, c-format
msgid "Internal ISDN card"
msgstr "Scheda ISDN interna"

#: ../../network/isdn.pm:1
#, c-format
msgid "What kind is your ISDN connection?"
msgstr "Di che tipo è la tua connessione ISDN?"

#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
msgid "Network Configuration Wizard"
msgstr "Wizard della configurazione di rete"

#: ../../network/isdn.pm:1
#, c-format
msgid "Old configuration (isdn4net)"
msgstr "Vecchia configurazione (isdn4net)"

#: ../../network/isdn.pm:1
#, c-format
msgid "New configuration (isdn-light)"
msgstr "Nuova configurazione (isdn-light)"

#: ../../network/isdn.pm:1
#, c-format
msgid ""
"Which ISDN configuration do you prefer?\n"
"\n"
"* The Old configuration uses isdn4net. It contains powerful\n"
"  tools, but is tricky to configure, and not standard.\n"
"\n"
"* The New configuration is easier to understand, more\n"
"  standard, but with less tools.\n"
"\n"
"We recommand the light configuration.\n"
msgstr ""
"Che configurazione ISDN preferisci?\n"
"\n"
"* La Vecchia configurazione usa isdn4net. Contiene strumenti potenti,\n"
"  ma è difficile da configurare per un principiante, e non standard.\n"
"\n"
"* La Nuova configurazione è più facile da capire, più aderente allo\n"
"  standard, ma dispone di un numero di strumenti inferiore.\n"
"\n"
"Raccomandiamo la configurazione leggera.\n"
"\n"

#: ../../network/modem.pm:1
#, fuzzy, c-format
msgid "Do nothing"
msgstr "ma non coincidono"

#: ../../network/modem.pm:1
#, c-format
msgid "Install rpm"
msgstr "Installa rpm"

#: ../../network/modem.pm:1
#, c-format
msgid ""
"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""

#: ../../network/modem.pm:1
#, c-format
msgid "Title"
msgstr "Titolo"

#: ../../network/modem.pm:1
#, c-format
msgid ""
"Your modem isn't supported by the system.\n"
"Take a look at http://www.linmodems.org"
msgstr ""

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Second DNS Server (optional)"
msgstr "Secondo server DNS (opzionale)"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "First DNS Server (optional)"
msgstr "Primo server DNS (opzionale)"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Domain name"
msgstr "Nome dominio"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "CHAP"
msgstr "CHAP"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Script-based"
msgstr "Basata su script"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Terminal-based"
msgstr "Basata su terminale"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "PAP"
msgstr "PAP"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Login ID"
msgstr "ID di accesso"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Phone number"
msgstr "Numero telefonico"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Connection name"
msgstr "Nome connessione"

#: ../../network/modem.pm:1
#, c-format
msgid "Dialup options"
msgstr "Opzioni di chiamata"

#: ../../network/modem.pm:1
#, c-format
msgid "Please choose which serial port your modem is connected to."
msgstr "Per favore scegli a che porta seriale è connesso il tuo modem."

#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
msgid "Network Configuration"
msgstr "Configurazione della rete"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"Problems occured during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection doesn't "
"work, you might want to relaunch the configuration."
msgstr ""
"Si sono verificati dei problemi durante la configurazione.\n"
"Provate la connessione usando net_monitor o mcc. Se la connessione non "
"funziona, dovreste ripetere la configurazione."

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"After this is done, we recommend that you restart your X environment to "
"avoid any hostname-related problems."
msgstr ""
"Dopo che questo sarà stato fatto, vi raccomandiamo di riavviare il\n"
"vostro ambiente X per evitare problemi relativi al cambio di hostname."

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"The configuration will now be applied to your system.\n"
"\n"
msgstr ""
"Congratulazioni, la configurazione della rete e di Internet è finita.\n"
"\n"
"Adesso questa configurazione verrà applicata al vostro sistema.\n"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"A problem occured while restarting the network: \n"
"\n"
"%s"
msgstr ""
"Si è verificato un problema al momento di riavviare la rete: \n"
"\n"
"%s"

#: ../../network/netconnect.pm:1
#, fuzzy, c-format
msgid "The network needs to be restarted. Do you want to restart it ?"
msgstr "Il pacchetto %s deve essere installato. Lo installo?"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Network configuration"
msgstr "Configurazione della rete"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Do you want to start the connection at boot?"
msgstr "Vuoi effettuare la connessione all'avvio?"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Internet connection"
msgstr "Connessione ad Internet"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""
"Hai configurato diversi tipi di connessione ad Internet.\n"
"Scegli quello che vuoi usare.\n"
"\n"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Choose the connection you want to configure"
msgstr "Scegli il tipo di connessione che vuoi configurare"

#: ../../network/netconnect.pm:1
#, c-format
msgid "ethernet card(s) detected"
msgstr "rilevata scheda(e) ethernet"

#: ../../network/netconnect.pm:1
#, c-format
msgid "LAN connection"
msgstr "Connessione LAN"

#: ../../network/netconnect.pm:1
#, c-format
msgid "cable connection detected"
msgstr "Rilevata connessione via cavo"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Cable connection"
msgstr "Connessione via cavo"

#: ../../network/netconnect.pm:1
#, c-format
msgid "detected"
msgstr "rilevato"

#: ../../network/netconnect.pm:1
#, c-format
msgid "ADSL connection"
msgstr "Connessione ADSL"

#: ../../network/netconnect.pm:1
#, c-format
msgid "detected %s"
msgstr "rilevato %s"

#: ../../network/netconnect.pm:1
#, c-format
msgid "ISDN connection"
msgstr "Connessione ISDN"

#: ../../network/netconnect.pm:1
#, fuzzy, c-format
msgid "Winmodem connection"
msgstr "Connessione normale via modem"

#: ../../network/netconnect.pm:1
#, c-format
msgid "detected on port %s"
msgstr "rilevato sulla porta: %s"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Normal modem connection"
msgstr "Connessione normale via modem"

#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Detecting devices..."
msgstr "Riconoscimento periferiche..."

#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
msgid "Expert Mode"
msgstr "Modo Esperto"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Use auto detection"
msgstr "Usa il riconoscimento automatico"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Choose the profile to configure"
msgstr "Scegli il profilo da configurare"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"Welcome to The Network Configuration Wizard.\n"
"\n"
"We are about to configure your internet/network connection.\n"
"If you don't want to use the auto detection, deselect the checkbox.\n"
msgstr ""
"Benvenuti nel Wizard di configurazione della Rete!\n"
"\n"
"Stiamo per configurare la vostra connessione di rete/ad Internet.\n"
"Se non volete usare il riconoscimento automatico, deselezionate il \n"
"pulsante dell'opzione.\n"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""
"Dato che stai effettuando una installazione via rete, quest'ultima è già "
"configurata.\n"
"Clicca su Ok per mantenere questa configurazione, o su Annulla per "
"riconfigurare la rete e la connessione ad Internet.\n"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"\n"
"\n"
"\n"
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press OK to continue."
msgstr ""
"\n"
"\n"
"\n"
"Stiamo per configurare la connessione %s.\n"
"\n"
"\n"
"Premi OK per cominciare."

#: ../../network/netconnect.pm:1
#, c-format
msgid "We are now going to configure the %s connection."
msgstr "Adesso proseguiremo con la configurazione della connessione %s."

#: ../../network/netconnect.pm:1
#, c-format
msgid "Internet connection & configuration"
msgstr "Connessione & configurazione Internet"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Configure the connection"
msgstr "Configura la connessione"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Disconnect"
msgstr "Disconnetti"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Connect"
msgstr "Connetti"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"\n"
"You can reconfigure your connection."
msgstr ""
"\n"
"Puoi configurare nuovamente la connessione."

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"\n"
"You can connect to the Internet or reconfigure your connection."
msgstr ""
"\n"
"Puoi connetterti ad Internet o configurare nuovamente la connessione."

#: ../../network/netconnect.pm:1
#, c-format
msgid "You are not currently connected to the Internet."
msgstr "In questo momento non sei connesso ad Internet"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"\n"
"You can disconnect or reconfigure your connection."
msgstr ""
"\n"
"Puoi disconnetterti o riconfigurare la tua connessione."

#: ../../network/netconnect.pm:1
#, c-format
msgid "You are currently connected to the Internet."
msgstr "Adesso sei connesso ad Internet"

#: ../../network/network.pm:1
#, c-format
msgid "URL should begin with 'ftp:' or 'http:'"
msgstr "L'URL dovrebbe cominciare con \"http:\""

#: ../../network/network.pm:1
#, c-format
msgid "Proxy should be http://..."
msgstr "Il proxy dovrebbe essere http://..."

#: ../../network/network.pm:1
#, c-format
msgid "FTP proxy"
msgstr "Proxy FTP"

#: ../../network/network.pm:1
#, c-format
msgid "HTTP proxy"
msgstr "Proxy HTTP"

#: ../../network/network.pm:1
#, c-format
msgid "Proxies configuration"
msgstr "Configurazione dei proxy"

#: ../../network/network.pm:1
#, fuzzy, c-format
msgid "Gateway address should be in format 1.2.3.4"
msgstr "L'indirizzo IP deve essere in formato 1.2.3.4"

#: ../../network/network.pm:1
#, fuzzy, c-format
msgid "DNS server address should be in format 1.2.3.4"
msgstr "L'indirizzo IP deve essere in formato 1.2.3.4"

#: ../../network/network.pm:1
#, c-format
msgid "Gateway device"
msgstr "Dispositivo di gateway"

#: ../../network/network.pm:1
#, c-format
msgid "Gateway (e.g. %s)"
msgstr "Gateway (es. %s)"

#: ../../network/network.pm:1
#, c-format
msgid "DNS server"
msgstr "Server DNS"

#: ../../network/network.pm:1
#, c-format
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one."
msgstr ""
"Per favore inserisci il tuo nome host.\n"
"Il tuo nome host dovrebbe essere uno pienamente qualificato,\n"
"come \"mybox.mylab.myco.com\".\n"
"Puoi anche inserire l'indirizzo IP del gateway se ne hai uno."

#: ../../network/network.pm:1
#, c-format
msgid ""
"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
"enough '0' (zeroes)."
msgstr ""

#: ../../network/network.pm:1
#, c-format
msgid ""
"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
"frequency), or add enough '0' (zeroes)."
msgstr ""

#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "IP address should be in format 1.2.3.4"
msgstr "L'indirizzo IP deve essere in formato 1.2.3.4"

#: ../../network/network.pm:1
#, c-format
msgid "Start at boot"
msgstr "Attiva al momento del boot"

#: ../../network/network.pm:1
#, fuzzy, c-format
msgid "Assign host name from DHCP address"
msgstr "Per favore inserisci il nome dell'host o l'IP"

#: ../../network/network.pm:1
#, fuzzy, c-format
msgid "Network Hotplugging"
msgstr "Configurazione della rete"

#: ../../network/network.pm:1
#, c-format
msgid "Track network card id (useful for laptops)"
msgstr "Individua identità della scheda di rete (utile per i laptop)"

#: ../../network/network.pm:1
#, fuzzy, c-format
msgid "DHCP host name"
msgstr "Nome host"

#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
msgid "Netmask"
msgstr "Netmask"

#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#: ../../standalone/drakconnect:1
#, c-format
msgid "IP address"
msgstr "Indirizzo IP"

#: ../../network/network.pm:1
#, c-format
msgid "(bootp/dhcp/zeroconf)"
msgstr "(bootp/dhcp/zeroconf)"

#: ../../network/network.pm:1
#, c-format
msgid "Automatic IP"
msgstr "IP automatico"

#: ../../network/network.pm:1
#, c-format
msgid " (driver %s)"
msgstr " (driver %s)"

#: ../../network/network.pm:1
#, c-format
msgid "Configuring network device %s"
msgstr "Sto configurando il dispositivo di rete %s"

#: ../../network/network.pm:1
#, c-format
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"Per favore inserisci la configurazione IP per questa macchina.\n"
"Ogni dato dovrebbe essere inserito come un indirizzo IP in notazione\n"
"decimale puntata (ad esempio 1.2.3.4.)."

#: ../../network/network.pm:1
#, c-format
msgid ""
"WARNING: this device has been previously configured to connect to the "
"Internet.\n"
"Simply accept to keep this device configured.\n"
"Modifying the fields below will override this configuration."
msgstr ""
"ATTENZIONE: questo dispositivo è stato precedentemente configurato per\n"
"connettersi ad Internet.\n"
"Devi solo cliccare su OK per mantenere la precedente configurazione.\n"
"Modifiche ai campi qui sotto cambieranno questa configurazione."

#: ../../network/shorewall.pm:1
#, c-format
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fixes after installation."
msgstr ""
"Attenzione! È stata rilevata una configurazione di firewall esistente. "
"Potrebbe avere bisogno di alcuni aggiustamenti manuali dopo l'installazione."

#: ../../network/shorewall.pm:1
#, c-format
msgid "Firewalling configuration detected!"
msgstr "Rilevata configurazione di Firewall!"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Account Password"
msgstr "Password dell'account"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Account Login (user name)"
msgstr "Login dell'account (nome utente)"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Connection timeout (in sec)"
msgstr "Timeout della connessione (in secondi)"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Connection speed"
msgstr "Velocità della connessione"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Dialing mode"
msgstr "Modalità di chiamata"

#: ../../network/tools.pm:1
#, c-format
msgid "Choose your country"
msgstr "Scegli la tua nazione"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider dns 2 (optional)"
msgstr "Dns 2 del provider (opzionale)"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider dns 1 (optional)"
msgstr "Dns 1 del provider (opzionale)"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider phone number"
msgstr "Numero telefonico del provider"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider name (ex provider.net)"
msgstr "Nome del provider (es. provider.net)"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Your personal phone number"
msgstr "Il tuo numero di telefono personale"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO_1"
msgstr "IO_1 della scheda"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO_0"
msgstr "IO_0 della scheda"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO"
msgstr "IO della scheda"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card mem (DMA)"
msgstr "Memoria della scheda (DMA)"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IRQ"
msgstr "IRQ della scheda"

#: ../../network/tools.pm:1
#, c-format
msgid "Please fill or check the field below"
msgstr "Per favore riempi o controlla il campo qui sotto"

#: ../../network/tools.pm:1
#, c-format
msgid "Connection Configuration"
msgstr "Configurazione della Connessione"

#: ../../network/tools.pm:1
#, c-format
msgid ""
"The system doesn't seem to be connected to the Internet.\n"
"Try to reconfigure your connection."
msgstr ""
"Il sistema non sembra essere connesso ad Internet.\n"
"Prova a configurare nuovamente la connessione."

#: ../../network/tools.pm:1
#, c-format
msgid "For security reasons, it will be disconnected now."
msgstr "Per ragioni di sicurezza, adesso verrà disconnesso."

#: ../../network/tools.pm:1
#, c-format
msgid "The system is now connected to the Internet."
msgstr "Adesso il sistema è connesso ad Internet"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Testing your connection..."
msgstr "Sto provando la tua connessione ..."

#: ../../network/tools.pm:1
#, c-format
msgid "Do you want to try to connect to the Internet now?"
msgstr "Vuoi provare a connetterti ad Internet adesso?"

#: ../../network/tools.pm:1
#, c-format
msgid "Internet configuration"
msgstr "Configurazione di internet"

#: ../../partition_table/raw.pm:1
#, c-format
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random, corrupted "
"data."
msgstr ""
"Al tuo disco sta accadendo qualcosa di brutto. \n"
"Un test per verificare l'integrità dei dati è fallito. \n"
"Significa che scrivere qualsiasi cosa sul disco genererà solo spazzatura a "
"caso"

#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid " (Default)"
msgstr " (Predefinito)"

#: ../../printer/cups.pm:1
#, c-format
msgid "On CUPS server \"%s\""
msgstr "Sul server CUPS \"%s\""

#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
msgid "Remote Printers"
msgstr "Stampanti remote"

#: ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
msgid "CUPS"
msgstr "CUPS"

#: ../../printer/cups.pm:1
#, c-format
msgid "(on this machine)"
msgstr "(su questa macchina)"

#: ../../printer/cups.pm:1
#, c-format
msgid "(on %s)"
msgstr "(su %s)"

#: ../../printer/data.pm:1
#, c-format
msgid "CUPS - Common Unix Printing System"
msgstr "CUPS - Common Unix Printing System"

#: ../../printer/data.pm:1
#, c-format
msgid "LPRng"
msgstr "LPRng"

#: ../../printer/data.pm:1
#, c-format
msgid "LPRng - LPR New Generation"
msgstr "LPRng - LPR New Generation"

#: ../../printer/data.pm:1
#, c-format
msgid "LPD"
msgstr "LPD"

#: ../../printer/data.pm:1
#, c-format
msgid "LPD - Line Printer Daemon"
msgstr "LPD - Line Printer Daemon"

#: ../../printer/data.pm:1
#, c-format
msgid "PDQ"
msgstr "PDQ"

#: ../../printer/data.pm:1
#, c-format
msgid "PDQ - Print, Don't Queue"
msgstr "PDQ - Print, Don't Queue"

#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Unknown Model"
msgstr "Modello sconosciuto"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Unknown model"
msgstr "Modello sconosciuto"

#: ../../printer/main.pm:1
#, c-format
msgid "%s (Port %s)"
msgstr "%s (Porta %s)"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "Host %s"
msgstr "Nome host"

#: ../../printer/main.pm:1
#, c-format
msgid "Network %s"
msgstr "Rete %s"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Interface \"%s\""
msgstr "Interfaccia \"%s\""

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Local network(s)"
msgstr "Rete locale di classe C"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Raw printer (No driver)"
msgstr "Stampante di tipo raw (nessun driver)"

#: ../../printer/main.pm:1
#, c-format
msgid ", using command %s"
msgstr ", uso il comando %s"

#: ../../printer/main.pm:1
#, c-format
msgid " on Novell server \"%s\", printer \"%s\""
msgstr " sul server Novell \"%s\", stampante \"%s\""

#: ../../printer/main.pm:1
#, c-format
msgid " on SMB/Windows server \"%s\", share \"%s\""
msgstr " sul server Windows/SMB \"%s\", condivisione \"%s\""

#: ../../printer/main.pm:1
#, c-format
msgid ", TCP/IP host \"%s\", port %s"
msgstr ", host TCP/IP \"%s\", porta %s"

#: ../../printer/main.pm:1
#, c-format
msgid " on LPD server \"%s\", printer \"%s\""
msgstr " sul server LPD \"%s\", stampante \"%s\""

#: ../../printer/main.pm:1
#, c-format
msgid ", printing to %s"
msgstr ", sto stampando su %s"

#: ../../printer/main.pm:1
#, c-format
msgid ", multi-function device"
msgstr ", dispositivo multifunzione"

#: ../../printer/main.pm:1
#, c-format
msgid ", multi-function device on HP JetDirect"
msgstr ", dispositivo multifunzione su HP JetDirect"

#: ../../printer/main.pm:1
#, c-format
msgid ", multi-function device on USB"
msgstr ", dispositivo multifunzione su USB"

#: ../../printer/main.pm:1
#, c-format
msgid ", multi-function device on parallel port \\#%s"
msgstr ", dispositivo multifunzione sulla porta parallela \\#%s"

#: ../../printer/main.pm:1
#, c-format
msgid ", USB printer"
msgstr ", stampante USB"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid ", USB printer \\#%s"
msgstr ", stampante USB \\#%s"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid " on parallel port \\#%s"
msgstr " sulla porta parallela \\#%s"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Local Printers"
msgstr "Stampanti locali"

#: ../../printer/main.pm:1
#, c-format
msgid "Pipe job into a command"
msgstr "Invia tramite pipe al comando"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Enter a printer device URI"
msgstr "Indica l'URI di un dispositivo di stampa"

#: ../../printer/main.pm:1
#, c-format
msgid "Printer on NetWare server"
msgstr "Stampante su server NetWare"

#: ../../printer/main.pm:1
#, c-format
msgid "Printer on SMB/Windows 95/98/NT server"
msgstr "Stampante su server SMB/Windows95/98/NT"

#: ../../printer/main.pm:1
#, c-format
msgid "Network printer (TCP/Socket)"
msgstr "Stampante di rete (TCP/Socket)"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer on remote lpd server"
msgstr "Stampante su server lpd remoto"

#: ../../printer/main.pm:1
#, c-format
msgid "Printer on remote CUPS server"
msgstr "Stampante su server CUPS remoto"

#: ../../printer/main.pm:1
#, c-format
msgid "Remote printer"
msgstr "Stampante remota"

#: ../../printer/main.pm:1
#, c-format
msgid "Local printer"
msgstr "Stampante locale"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configuring applications..."
msgstr "Configurazione applicazioni ..."

#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
msgid "Printerdrake"
msgstr "PrinterDrake"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Removing printer \"%s\"..."
msgstr "Sto rimuovendo la stampante \"%s\" ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr "Volete davvero rimuovere la stampante \"%s\"?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remove printer"
msgstr "Rimuovi stampante"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Learn how to use this printer"
msgstr "Sapere come usare questa stampante"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print test pages"
msgstr "Stampa della(e) pagina(e) di prova"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
"GIMP."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Default printer"
msgstr "Stampante predefinita"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Set this printer as the default"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer options"
msgstr "Opzioni stampante"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer manufacturer, model"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer manufacturer, model, driver"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Removing old printer \"%s\"..."
msgstr "Sto rimuovendo la vecchia stampante \"%s\" ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer name, description, location"
msgstr "Nome, descrizione, collocazione della stampante"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer connection type"
msgstr "Tipo di connessione della stampante"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Raw printer"
msgstr "Stampante in modo raw"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do it!"
msgstr ""

#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
msgid "Close"
msgstr "Chiudi"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Printer %s\n"
"What do you want to modify on this printer?"
msgstr ""
"Stampante %s\n"
"Cosa volete modificare riguardo questa stampante?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Modify printer configuration"
msgstr "Modifica configurazione stampante"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Add a new printer"
msgstr "Aggiungi nuova stampante"

#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakfloppy:1
#, c-format
msgid "Normal Mode"
msgstr "Modo Normale"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Change the printing system"
msgstr "Cambia il sistema di stampa"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Printer sharing"
msgstr "Stampa"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "CUPS configuration"
msgstr "Configurazione di CUPS"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Display all available remote CUPS printers"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; or to view information about "
"it."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; to view information about it; "
"or to make a printer on a remote CUPS server available for Star Office/"
"OpenOffice.org/GIMP."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing system: "
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Checking installed software..."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing Foomatic..."
msgstr "Installazione del pacchetto Foomatic"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Failed to configure printer \"%s\"!"
msgstr "Sto configurando la stampante \"%s\" ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configuring printer \"%s\"..."
msgstr "Sto configurando la stampante \"%s\" ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Reading printer data..."
msgstr "Sto leggendo i dati della stampante..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Which printing system (spooler) do you want to use?"
msgstr "Che sistema di stampa (spooler) vuoi usare?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Select Printer Spooler"
msgstr "Scegli il sistema di stampa"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Setting Default Printer..."
msgstr "Stampante predefinita"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Installing %s ..."
msgstr "Installazione dei pacchetti ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Removing %s ..."
msgstr "Sto cancellando %s ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printing system (%s) will not be started automatically when the machine "
"is booted.\n"
"\n"
"It is possible that the automatic starting was turned off by changing to a "
"higher security level, because the printing system is a potential point for "
"attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing system turned on "
"again?"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Starting the printing system at boot time"
msgstr "Avvio il sistema di stampa al momento del boot"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are about to install the printing system %s on a system running in the %"
"s security level.\n"
"\n"
"This printing system runs a daemon (background process) which waits for "
"print jobs and handles them. This daemon is also accessable by remote "
"machines through the network and so it is a possible point for attacks. "
"Therefore only a few selected daemons are started by default in this "
"security level.\n"
"\n"
"Do you really want to configure printing on this machine?"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "paranoid"
msgstr "paranoico"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "high"
msgstr "alto"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Restarting printing system..."
msgstr "Sto riavviando il sistema di stampa ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configuration of a remote printer"
msgstr "Configura di una stampante remota"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The network access was not running and could not be started. Please check "
"your configuration and your hardware. Then try to configure your remote "
"printer again."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The network configuration done during the installation cannot be started "
"now. Please check whether the network is accessable after booting your "
"system and correct the configuration using the Mandrake Control Center, "
"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
"printer, also using the Mandrake Control Center, section \"Hardware\"/"
"\"Printer\""
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configure the network now"
msgstr "Configura la rete adesso"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Go on without configuring the network"
msgstr "Vai avanti senza configurare la rete"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are going to configure a remote printer. This needs working network "
"access, but your network is not configured yet. If you go on without network "
"configuration, you will not be able to use the printer which you are "
"configuring now. How do you want to proceed?"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Network functionality not configured"
msgstr "Funzionalità di rete non configurata"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Starting network..."
msgstr "Sto attivando la connessione di rete ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Refreshing printer data..."
msgstr "Sto aggiornando i dati della stampante ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"), Should it be also "
"the default printer under the new printing system %s?"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Transfer printer configuration"
msgstr "Configurazione della stampante a trasferimento"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Transferring %s..."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "New printer name"
msgstr "Nuovo nome della stampante"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""
"Il nome della stampante dovrebbe contenere solo lettere, numeri e il "
"trattino di sottolineatura"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Transfer"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do not transfer printers"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Also printers configured with the PPD files provided by their manufacturers "
"or with native CUPS drivers cannot be transferred."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"In addition, queues not created with this program or \"foomatic-configure\" "
"cannot be transferred."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
"printers.\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"CUPS does not support printers on Novell servers or printers sending the "
"data into a free-formed command.\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can copy the printer configuration which you have done for the spooler %"
"s to %s, your current spooler. All the configuration data (printer name, "
"description, location, connection type, and default option settings) is "
"overtaken, but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following reasons:\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Your printer was configured automatically to give you access to the photo "
"card drives from your PC. Now you can access your photo cards using the "
"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
"\"man mtools\" on the command line for more info). You find the card's file "
"system under the drive letter \"p:\", or subsequent drive letters when you "
"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
"can switch between drive letters with the field at the upper-right corners "
"of the file lists."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Your multi-function device was configured automatically to be able to scan. "
"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
"scanner when you have more than one) from the command line or with the "
"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
"\" menu. Call also \"man scanimage\" on the command line to get more "
"information.\n"
"\n"
"Do not use \"scannerdrake\" for this device!"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing test page(s)..."
msgstr "Stampa della(e) pagina(e) di prova..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print option list"
msgstr "Lista opzioni di stampa"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing on the printer \"%s\""
msgstr "Sto stampando con la stampante \"%s\""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Printing/Photo Card Access on \"%s\""
msgstr "Stampa/Scansione in corso su \"%s\""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing/Scanning on \"%s\""
msgstr "Stampa/Scansione in corso su \"%s\""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Printing/Scanning/Photo Cards on \"%s\""
msgstr "Stampa/Scansione in corso su \"%s\""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To know about the options available for the current printer read either the "
"list shown below or click on the \"Print option list\" button.%s%s\n"
"\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Did it work properly?"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""
"La pagina(e) di prova è stata inviata alla stampante.\n"
"potrebbe occorrere un po' di tempo prima che la stampa inizi.\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""
"La pagina(e) di prova è stata inviata alla stampante.\n"
"Potrebbe occorrere un po' di tempo prima che la stampa inizi.\n"
"Stato della stampa:\n"
"%s\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do not print any test page"
msgstr "Non stampare nessuna pagina di prova"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Photo test page"
msgstr "Pagina di prova fotografica"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Alternative test page (A4)"
msgstr "Pagina di prova alternativa (A4)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Alternative test page (Letter)"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Standard test page"
msgstr "Pagina di prova standard"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print"
msgstr "Stampa"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "No test pages"
msgstr "Nessuna pagina di prova"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed and on "
"laser printers with too low memory it can even not come out. In most cases "
"it is enough to print the standard test page."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Test pages"
msgstr "Pagine di prova"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr ""
"Volete impostare questa stampante (\"%s)\n"
"come stampante predefinita?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Option %s out of range!"
msgstr "Opzione %s fuori scala!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Option %s must be a number!"
msgstr "L'opzione %s dev'essere un numero!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Option %s must be an integer number!"
msgstr "L'opzione %s dev'essere un numero intero!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Printer default settings\n"
"\n"
"You should make sure that the page size and the ink type/printing mode (if "
"available) and also the hardware configuration of laser printers (memory, "
"duplex unit, extra trays) are set correctly. Note that with a very high "
"printout quality/resolution printing can get substantially slower."
msgstr ""
"Impostazioni predefinite della stampante\n"
"\n"
"Dovreste accertarvi che le dimensioni della pagina e il tipo di inchiostro/"
"modo di stampa (se disponibile) e anche la configurazione hardware delle "
"stampanti laser (memoria, unità duplex, cassetti supplementari) siano "
"impostati correttamente. Si noti che quando la qualità/risoluzione di stampa "
"è molto alta, la durata della stampa può diventare sensibilmente più lenta."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Your printer belongs to the group of GDI laser printers (winprinters) sold "
"by different manufacturers which uses the Zenographics ZJ-stream raster "
"format for the data sent to the printer. The driver for these printers is "
"still in a very early development stage and so it will perhaps not always "
"work properly. Especially it is possible that the printer only works when "
"you choose the A4 paper size.\n"
"\n"
"Some of these printers, as the HP LaserJet 1000, for which this driver was "
"originally created, need their firmware to be uploaded to them after they "
"are turned on. In the case of the HP LaserJet 1000 you have to search the "
"printer's Windows driver CD or your Windows partition for the file "
"\"sihp1000.img\" and upload the file to the printer with one of the "
"following commands:\n"
"\n"
"     lpr -o raw sihp1000.img\n"
"     cat sihp1000.img > /dev/usb/lp0\n"
"\n"
"The first command can be given by any normal user, the second must be given "
"as root. After having done so you can print normally.\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To be able to print with your Lexmark inkjet and this configuration, you "
"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
"\"Linux\" as operating system. The drivers come as RPM packages or shell "
"scripts with interactive graphical installation. You do not need to do this "
"configuration by the graphical frontends. Cancel directly after the license "
"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
"adjust the head alignment settings with this program."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Lexmark inkjet configuration"
msgstr "Configurazione di una stampante Lexmark a getto d'inchiostro"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The inkjet printer drivers provided by Lexmark only support local printers, "
"no printers on remote machines or print server boxes. Please connect your "
"printer to a local port or configure it on the machine where it is connected "
"to."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they work only when "
"connected to the first parallel port. When your printer is connected to "
"another port or to a print server box please connect the printer to the "
"first parallel port before you print a test page. Otherwise the printer will "
"not work. Your connection type setting will be ignored by the driver."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "OKI winprinter configuration"
msgstr "Configurazione di una stampante OKI winprinter"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"If your printer is not listed, choose a compatible (see printer manual) or a "
"similar one."
msgstr ""
"Se la vostra stampante non è presente nella lista, cercate un modello "
"compatibile o simile (consultate il manuale della stampante)."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"\n"
"Please check whether Printerdrake did the auto-detection of your printer "
"model correctly. Find the correct model in the list when a wrong model or "
"\"Raw printer\" is highlighted."
msgstr ""
"\n"
"\n"
"Per favore, controllate che Printerdrake abbia effettuato correttamente il "
"riconoscimento automatico della vostra stampante. Se il cursore si trova su "
"un modello errato o su \"Stampante di tipo raw\", cercate quello corretto "
"nella lista."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Which printer model do you have?"
msgstr "Che modello di stampante hai?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer model selection"
msgstr "Scelta del modello della stampante"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Reading printer database..."
msgstr "Sto leggendo il database delle stampanti"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Select model manually"
msgstr "Selezionate il modello manualmente"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The model is correct"
msgstr "Il modello è corretto"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Printerdrake has compared the model name resulting from the printer auto-"
"detection with the models listed in its printer database to find the best "
"match. This choice can be wrong, especially when your printer is not listed "
"at all in the database. So check whether the choice is correct and click "
"\"The model is correct\" if so and if not, click \"Select model manually\" "
"so that you can choose your printer model manually on the next screen.\n"
"\n"
"For your printer Printerdrake has found:\n"
"\n"
"%s"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Your printer model"
msgstr "Il modello della vostra stampante"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Preparing printer database..."
msgstr "Sto preparando il database delle stampanti ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Location"
msgstr "Posizione"

#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Description"
msgstr "Descrizione"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Name of printer"
msgstr "Nome della stampante"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Every printer needs a name (for example \"printer\"). The Description and "
"Location fields do not need to be filled in. They are comments for the users."
msgstr ""
"Ogni stampante deve avere un nome (ad esempio \"stampante\").\n"
"Non è indispensabile riempire i campi Descrizione e \n"
"Posizione. Si tratta di commenti per gli utenti."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Enter Printer Name and Comments"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Making printer port available for CUPS..."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Photo memory card access on your HP multi-function device"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Scanning on your HP multi-function device"
msgstr ", dispositivo multifunzione"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Installing mtools packages..."
msgstr "Installazione dei pacchetti ..."

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Installing SANE packages..."
msgstr "Installazione dei pacchetti ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Checking device and configuring HPOJ..."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Installing HPOJ package..."
msgstr "Installazione dei pacchetti ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
"PhotoSmart or an HP LaserJet 2200?"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "A command line must be entered!"
msgstr "Dev'essere inserito un URI valido!"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Command line"
msgstr "Nome dominio"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Here you can specify any arbitrary command line into which the job should be "
"piped instead of being sent directly to a printer."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Pipe into command"
msgstr "Invia tramite pipe al comando"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Detected model: %s %s"
msgstr "Rilevato %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "A valid URI must be entered!"
msgstr "Dev'essere inserito un URI valido!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer Device URI"
msgstr "URI della stampante"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""
"Potete indicare direttamente l'URI di accesso alla stampante. Tale URI deve "
"essere conforme alle specifiche CUPS o Foomatic. Notate che non tutti i i "
"tipi di URI sono supportati da tutti gli spooler."

#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Port"
msgstr "Porta"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Printer host name or IP"
msgstr "Nome host della stampante"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The port number should be an integer!"
msgstr "Il numero della porta dovrebbe essere un numero intero!"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Printer host name or IP missing!"
msgstr "Nome host della stampante assente!"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
"To print to a TCP or socket printer, you need to provide the host name or IP "
"of the printer and optionally the port number (default is 9100). On HP "
"JetDirect servers the port number is usually 9100, on other servers it can "
"vary. See the manual of your hardware."
msgstr ""
"Per stampare su una stampante TCP/Socket, dovete indicare il\n"
"nome host della stampante e opzionalmente il numero della porta.\n"
"Sui server HP JetDirect il numero della porta in genere è 9100, su\n"
"altri server potrebbe essere diverso. Consultate il manuale del vostro\n"
"hardware."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Choose one of the auto-detected printers from the list or enter the hostname "
"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "TCP/Socket Printer Options"
msgstr "Opzioni della stampante TCP/Socket"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Host \"%s\", port %s"
msgstr "Host \"%s\", porta %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ", host \"%s\", port %s"
msgstr ", host \"%s\", porta %s"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Scanning network..."
msgstr "Sto attivando la connessione di rete ..."

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Printer auto-detection"
msgstr "Usa il riconoscimento automatico"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "NCP queue name missing!"
msgstr "Il nome della coda NCP è assente!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "NCP server name missing!"
msgstr "Il nome del server NCP è assente"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print Queue Name"
msgstr "Nome della coda di stampa"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer Server"
msgstr "Server della stampante"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print on a NetWare printer, you need to provide the NetWare print server "
"name (Note! it may be different from its TCP/IP hostname!) as well as the "
"print queue name for the printer you wish to access and any applicable user "
"name and password."
msgstr ""
"Per stampare su una stampante NetWare, dovete fornire il nome\n"
"del server di stampa NetWare (Attenzione! potrebbe essere diverso dal nome\n"
"del suo host TCP/IP!) insieme al nome della coda di stampa per la\n"
"stampante cui volete accedere e ogni nome utente e password applicabili."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "NetWare Printer Options"
msgstr "Opzioni stampante NetWare"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Connect your printer to a Linux server and let your Windows machine(s) "
"connect to it as a client.\n"
"\n"
"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Set up your Windows server to make the printer available under the IPP "
"protocol and set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are about to set up printing to a Windows account with password. Due to "
"a fault in the architecture of the Samba client software the password is put "
"in clear text into the command line of the Samba client used to transmit the "
"print job to the Windows server. So it is possible for every user on this "
"machine to display the password on the screen by issuing commands as \"ps "
"auxwww\".\n"
"\n"
"We recommend to make use of one of the following alternatives (in all cases "
"you have to make sure that only machines from your local network have access "
"to your Windows server, for example by means of a firewall):\n"
"\n"
"Use a password-less account on your Windows server, as the \"GUEST\" account "
"or a special account dedicated for printing. Do not remove the password "
"protection from a personal account or the administrator account.\n"
"\n"
"Set up your Windows server to make the printer available under the LPD "
"protocol. Then set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SECURITY WARNING!"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Samba share name missing!"
msgstr "Il nome della condivisione Samba è assente!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Either the server name or the server's IP must be given!"
msgstr "Devi indicare il nome del server o il numero IP dello stesso!"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Auto-detected"
msgstr "Usa il riconoscimento automatico"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Workgroup"
msgstr "Gruppo di lavoro"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Share name"
msgstr "Nome di condivisione"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SMB server IP"
msgstr "IP del server SMB"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SMB server host"
msgstr "Host del server SMB"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
" If the desired printer was auto-detected, simply choose it from the list "
"and then add user name, password, and/or workgroup if needed."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print to a SMB printer, you need to provide the SMB host name (Note! It "
"may be different from its TCP/IP hostname!) and possibly the IP address of "
"the print server, as well as the share name for the printer you wish to "
"access and any applicable user name, password, and workgroup information."
msgstr ""
"Per stampare su una stampante SMB, dovete indicare il nome\n"
"dell'host SMB (Attenzione! non sempre corrisponde al nome host TCP/IP\n"
"della macchina!) e possibilmente l'indirizzo IP del server di stampa, come\n"
"pure il nome di condivisione per la stampante cui volete accedere e ogni\n"
"informazione utile riguardo nome dell'utente, password e gruppo di lavoro."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "Opzioni Stampante SMB (Windows9x/NT)"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Printer \"%s\" on server \"%s\""
msgstr "Sto stampando con la stampante \"%s\""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ", printer \"%s\" on server \"%s\""
msgstr "sul server Windows \"%s\", condivisione \"%s\""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote printer name missing!"
msgstr "Nome della stampante remota assente!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote host name missing!"
msgstr "Nome host remoto assente!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote printer name"
msgstr "Nome della stampante remota"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote host name"
msgstr "Nome host remoto"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To use a remote lpd printer, you need to supply the hostname of the printer "
"server and the printer name on that server."
msgstr ""
"Per usare una stampante lpd remota, dovete indicare\n"
"il nome dell'host del server della stampante e il nome della stampante\n"
"su quel server."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote lpd Printer Options"
msgstr "Opzioni stampante lpd remota"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Manual configuration"
msgstr "Configurazione manuale"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "You must choose/enter a printer/device!"
msgstr "Dovete scegliere/indicare una stampante/un dispositivo!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
" (Porte parallele: /dev/lp0, /dev/lp1, ..., equivalenti a LPT1:, LPT2:, ...; "
"prima stampante USB: /dev/usb/lp0, seconda: /dev/usb/lp1, ...)."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Please choose the port that your printer is connected to."
msgstr ""
"Per favore scegliete la porta alla quale è connessa la vostra stampante."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please choose the port that your printer is connected to or enter a device "
"name/file name in the input line"
msgstr ""
"Per favore scegliete la porta alla quale è connessa la vostra stampante, "
"oppure inserite il nome di un dispositivo o di un file nel campo di "
"immissione testo"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Please choose the printer to which the print jobs should go."
msgstr ""
"Per favore scegliete la porta alla quale è connessa la vostra stampante."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please choose the printer you want to set up. The configuration of the "
"printer will work fully automatically. If your printer was not correctly "
"detected or if you prefer a customized printer configuration, turn on "
"\"Manual configuration\"."
msgstr ""
"Per favore scegliete la stampante che volete configurare, la configurazione "
"verrà effettuata in modo del tutto automatico. Se la vostra stampante non è "
"stata riconosciuta correttamente, o se preferite una configurazione "
"personalizzata, cliccate su \"Configurazione manuale\"."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Here is a list of all auto-detected printers. "
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Currently, no alternative possibility is available"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The configuration of the printer will work fully automatically. If your "
"printer was not correctly detected or if you prefer a customized printer "
"configuration, turn on \"Manual configuration\"."
msgstr ""
"La configurazione della stampante verrà effettuata automaticamente. Se la "
"vostra stampante non è stata riconosciuta in modo corretto, o se preferite "
"una configurazione personalizzata, cliccate su \"Configurazione manuale\"."

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "The following printer was auto-detected. "
msgstr "I seguenti pacchetti satanno per essere rimossi"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
"Please choose the printer to which the print jobs should go or enter a "
"device name/file name in the input line"
msgstr ""
"Per favore scegliete la porta alla quale è connessa la vostra stampante, "
"oppure inserite il nome di un dispositivo o di un file nel campo di "
"immissione testo"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
"Please choose the printer you want to set up or enter a device name/file "
"name in the input line"
msgstr ""
"Per favore scegliete la porta alla quale è connessa la vostra stampante, "
"oppure inserite il nome di un dispositivo o di un file nel campo di "
"immissione testo"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
"Alternatively, you can specify a device name/file name in the input line"
msgstr ""
"Per favore scegliete la porta alla quale è connessa la vostra stampante, "
"oppure inserite il nome di un dispositivo o di un file nel campo di "
"immissione testo"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
"If it is not the one you want to configure, enter a device name/file name in "
"the input line"
msgstr ""
"La stampante che segue è stata riconosciuta automaticamente, se non è quella "
"che desiderate configurare inserite un nome di dispositivo o di file nel "
"campo immissione testo"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Available printers"
msgstr "Stampante locale"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "No printer found!"
msgstr "Non ho trovato nessuna stampante locale!\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "You must enter a device or file name!"
msgstr "Devi indicare il nome di un dispositivo o di un file!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"No local printer found! To manually install a printer enter a device name/"
"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
"printer: /dev/usb/lp1, ...)."
msgstr ""
"Non è stata trovata nessuna stampante locale! Per installare manualmente una "
"stampante indicate il nome di un dispositivo o di un file nel campo di "
"immissione (porte parallele: /dev/lp0, /dev/"
"lp1, ..., equivalenti a LPT1:, LPT2:, ...; prima stampante USB: /dev/usb/"
"lp0, seconda: /dev/usb/lp1, ...)."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Local Printer"
msgstr "Stampante locale"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "USB printer \\#%s"
msgstr "Stampante USB \\#%s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer on parallel port \\#%s"
msgstr "Stampante sulla porta parallela \\#%s"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr "Stampante su server SMB/Windows95/98/NT"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Network printer \"%s\", port %s"
msgstr "Stampante di rete (TCP/Socket)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Detected %s"
msgstr "Rilevato %s"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ", printer \"%s\" on SMB/Windows server \"%s\""
msgstr "Stampante su server SMB/Windows95/98/NT"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ", network printer \"%s\", port %s"
msgstr ", stampante di rete\"%s\", porta %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Congratulations, your printer is now installed and configured!\n"
"\n"
"You can print using the \"Print\" command of your application (usually in "
"the \"File\" menu).\n"
"\n"
"If you want to add, remove, or rename a printer, or if you want to change "
"the default option settings (paper input tray, printout quality, ...), "
"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
"Center."
msgstr ""
"\n"
"Congratulazioni, adesso la vostra stampante è installata e configurata!\n"
"\n"
"Potete stampare usando il comando \"Stampa\" delle vostre applicazioni (in "
"genere si trova nel menu File\").\n"
"\n"
"Se desiderate aggiungere, rimuovere o rinominare una stampante, o se volete "
"modificare la configurazione predefinita (cassetto della carta, qualità di "
"stampa, ecc.), selezionate \"Stampante\" nella sezione \"Hardware\" del "
"Centro di controllo Mandrake."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Auto-detect printers connected directly to the local network"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Auto-detect printers connected to this machine"
msgstr "Riconoscimento automatico stampanti"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer or connected directly to the network.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network printers when you don't need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer, connected directly to the network or to a remote Windows machine.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) and your Windows machines must be connected and "
"turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network and/or Windows-hosted printers when you don't need "
"it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard allows you to install local or remote printers to be used from "
"this machine and also from other machines in the network.\n"
"\n"
"It asks you for all necessary information to set up the printer and gives "
"you access to all available printer drivers, driver options, and printer "
"connection types."
msgstr ""
"\n"
"Benvenuti nell'assistente di configurazione delle stampanti\n"
"\n"
"Questo assistente vi permette di installare stampanti remote o locali che "
"verranno usate da questa macchina e anche da altre macchine sulla rete.\n"
"\n"
"Vi chiederà tutte le informazioni necessarie per configurare la stampante, "
"dandovi accesso a tutti i driver, opzioni dei driver e tipi di connessione "
"disponibili."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"\n"
"Printerdrake could not determine which model your printer %s is. Please "
"choose the correct model from the list."
msgstr ""

#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
msgid ")"
msgstr ")"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid " on "
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "("
msgstr "("

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Configuring printer ..."
msgstr "Sto configurando la stampante \"%s\" ..."

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Searching for new printers..."
msgstr "Stampante locale"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"NOTE: Depending on the printer model and the printing system up to %d MB of "
"additional software will be installed."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Do you want to enable printing on the printers mentioned above?\n"
msgstr "Vuoi effettuare la connessione all'avvio?"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Do you want to enable printing on printers in the local network?\n"
msgstr ""
"Volete impostare questa stampante (\"%s)\n"
"come stampante predefinita?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Do you want to enable printing on the printers mentioned above or on "
"printers in the local network?\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid " (Make sure that all your printers are connected and turned on).\n"
msgstr ""
"Per favore scegliete la porta alla quale è connessa la vostra stampante."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"There are no printers found which are directly connected to your machine"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"There are %d unknown printers directly connected to your system"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"There is one unknown printer directly connected to your system"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"is directly connected to your system"
msgstr "Copia i font sul tuo sistema"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr "Copia i font sul tuo sistema"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
"The following printers\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr "Copia i font sul tuo sistema"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "and %d unknown printers"
msgstr "Aggiungi nuova stampante"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "and one unknown printer"
msgstr "Aggiungi nuova stampante"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Checking your system..."
msgstr "Sto riavviando il sistema di stampa ..."

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Restarting CUPS..."
msgstr "Riavvia XFS"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "This server is already in the list, it cannot be added again.\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Examples for correct IPs:\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "The entered IP is not correct.\n"
msgstr "Il modello è corretto"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Server IP missing!"
msgstr "Il nome del server NCP è assente"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Accessing printers on remote CUPS servers"
msgstr "Stampante su server CUPS remoto"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Remove selected server"
msgstr "Rimuovi quelli selezionati"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Edit selected server"
msgstr "rilevato %s"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Add server"
msgstr "Aggiungere un utente"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Add here the CUPS servers whose printers you want to use. You only need to "
"do this if the servers do not broadcast their printer information into the "
"local network."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "IP address of host/network:"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The entered host/network IP is not correct.\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Host/network IP address missing."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Choose the network or host on which the local printers should be made "
"available:"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Sharing of local printers"
msgstr "Stampante locale"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Remove selected host/network"
msgstr "Rimuovi quelli selezionati"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Edit selected host/network"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Add host/network"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"These are the machines and networks on which the locally connected printer"
"(s) should be available:"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"When this option is turned on, on every startup of CUPS it is automatically "
"made sure that\n"
"\n"
"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
"- when printer information is broadcasted, it does not contain \"localhost\" "
"as the server name.\n"
"\n"
"If some of these measures lead to problems for you, turn this option off, "
"but then you have to take care of these points."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Automatic correction of CUPS configuration"
msgstr "Configurazione automatica di CUPS"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To get access to printers on remote CUPS servers in your local network you "
"only need to turn on the \"Automatically find available printers on remote "
"machines\" option; the CUPS servers inform your machine automatically about "
"their printers. All printers currently known to your machine are listed in "
"the \"Remote printers\" section in the main window of Printerdrake. If your "
"CUPS server(s) is/are not in your local network, you have to enter the IP "
"address(es) and optionally the port number(s) here to get the printer "
"information from the server(s)."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "None"
msgstr "Fatto"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Additional CUPS servers: "
msgstr "Sul server CUPS \"%s\""

#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "No remote machines"
msgstr "(su questa macchina)"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Custom configuration"
msgstr "Riconfigurazione automatica"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Printer sharing on hosts/networks: "
msgstr "Stampa"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Automatically find available printers on remote machines"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The printers on this machine are available to other computers"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can also decide here whether printers on remote machines should be "
"automatically made available on this machine."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Here you can choose whether the printers connected to this machine should be "
"accessable by remote machines and by which remote machines."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "CUPS printer sharing configuration"
msgstr "Configurazione di una stampante OKI winprinter"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
"\n"
"Printers on remote CUPS servers do not need to be configured here; these "
"printers will be automatically detected."
msgstr ""
"\n"
"Con un server remoto CUPS, non devi configurare alcuna stampante\n"
"adesso: le stampanti saranno individuate automaticamente."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "How is the printer connected?"
msgstr "Com'è collegata la stampante?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Select Printer Connection"
msgstr "Scegli Connessione stampante"

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (umask)\n"
"\n"
"Set the user umask."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (val)\n"
"\n"
"Set the shell timeout. A value of zero means no timeout."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (size)\n"
"\n"
"Set shell commands history size. A value of -1 means unlimited."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check additions/removals of sgid files."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check open ports."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"if set, send the mail report to this email address else send it to root."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, report check result by mail."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check files/directories writable by everybody."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, reports check result to tty."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, run some checks against the rpm database."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, run chkrootkit checks."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check permissions of files in the users' home."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check additions/removals of suid root files."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, report check result to syslog."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"if set to yes, check for empty passwords, for no password in /etc/shadow and "
"for users with the 0 id other than root."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, run the daily security checks."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, verify checksum of the suid/sgid files."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, report unowned files."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (umask)\n"
"\n"
"Set the root umask."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (length, ndigits=0, nupper=0)\n"
"\n"
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Set the password history length to prevent password reuse."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (max, inactive=-1)\n"
"\n"
"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
"\\fP."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (name)\n"
"\n"
"Add the name as an exception to the handling of password aging by msec."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
" Enable/Disable sulogin(8) in single user level."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
" Activate/Disable daily security check."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Activate/Disable ethernet cards promiscuity check."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Use password to authenticate users."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
" Enabling su only from members of the wheel group or allow su from any user."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Enable/Disable msec hourly security check."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Enable/Disable the logging of IPv4 strange packets."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Enable/Disable libsafe if libsafe is found on the system."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg, alert=1)\n"
"\n"
"Enable/Disable IP spoofing protection."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg, alert=1)\n"
"\n"
"Enable/Disable name resolution spoofing protection.  If\n"
"\\fIalert\\fP is true, also reports to syslog."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
"expression describing what to log (see syslog.conf(5) for more details) and\n"
"dev the device to report the log."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
"allow and /etc/at.allow\n"
"(see man at(1) and crontab(1))."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: ()\n"
"\n"
"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
"server\n"
"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
"server\n"
"is used by chkconfig --add to decide to add a service if it is present in "
"the file\n"
"during the installation of packages."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
"\\fIarg\\fP = ALL. Only local ones\n"
"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
"services you need, use /etc/hosts.allow\n"
"(see hosts.allow(5))."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"The argument specifies if clients are authorized to connect\n"
"to the X server on the tcp port 6000 or not."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg, listen_tcp=None)\n"
"\n"
"Allow/Forbid X connections. First arg specifies what is done\n"
"on the client side: ALL (all connections are allowed), LOCAL (only\n"
"local connection) and NONE (no connection)."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Allow/Forbid the list of users on the system on display managers (kdm and "
"gdm)."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Allow/Forbid direct root login."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Allow/Forbid remote root login."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Allow/Forbid reboot by the console user."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
"\\fP = NONE no issues are\n"
"allowed else only /etc/issue is allowed."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Allow/Forbid autologin."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
" Accept/Refuse icmp echo."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
" Accept/Refuse broadcasted icmp echo."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Accept/Refuse bogus IPv4 error messages."
msgstr ""

#: ../../security/level.pm:1
#, c-format
msgid "Security Administrator (login or email)"
msgstr "Amministratore per la sicurezza (login o email)"

#: ../../security/level.pm:1
#, c-format
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr ""
"Una libreria che difende il sistema da attacchi del tipo \"buffer overflow\" "
"e \"format string\"."

#: ../../security/level.pm:1
#, c-format
msgid "Use libsafe for servers"
msgstr "Usare libsafe per i server"

#: ../../security/level.pm:1
#, c-format
msgid "Security level"
msgstr "Livello di sicurezza"

#: ../../security/level.pm:1
#, c-format
msgid "Please choose the desired security level"
msgstr "Scegliere livello di sicurezza desiderato"

#: ../../security/level.pm:1
#, c-format
msgid "DrakSec Basic Options"
msgstr "Opzioni base per DrakSec"

#: ../../security/level.pm:1
#, c-format
msgid ""
"This is similar to the previous level, but the system is entirely closed and "
"security features are at their maximum."
msgstr ""
"Basato sul livello precedente, ma ora il sistema è completamente\n"
"chiuso. Le funzioni di sicurezza sono al massimo."

#: ../../security/level.pm:1
#, c-format
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which can "
"accept\n"
"connections from many clients. Note: if your machine is only a client on the "
"Internet, you should choose a lower level."
msgstr ""
"Con questo livello di sicurezza, l'uso di questo sistema come server "
"diventa\n"
"possibile. La sicurezza è ora abbastanza alta per consentire l'utilizzo\n"
"del sistema come server che accetta connessioni da molti clienti. Nota: se "
"la vostra\n"
"macchina è un semplice client su Internet, sarebbe meglio scegliere un "
"livello più basso."

#: ../../security/level.pm:1
#, c-format
msgid ""
"There are already some restrictions, and more automatic checks are run every "
"night."
msgstr ""
"Esistono già alcuni limiti, e ogni notte vengono eseguiti ulteriori "
"controlli automatici."

#: ../../security/level.pm:1
#, c-format
msgid ""
"This is the standard security recommended for a computer that will be used "
"to connect to the Internet as a client."
msgstr ""
"Questo è il livello di sicurezza standard, raccomandato per un computer da "
"usare per connettersi ad Internet come client."

#: ../../security/level.pm:1
#, c-format
msgid ""
"Passwords are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""
"Ora le password sono abilitate, ma l'uso in rete è ancora sconsigliato."

#: ../../security/level.pm:1
#, c-format
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive. It must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"Questo livello va usato con cura. Rende il sistema più facile da usare,\n"
"ma molto delicato: non deve essere usato per una macchina connessa\n"
" ad altre o ad Internet. Gli accessi non sono regolati da password."

#: ../../security/level.pm:1
#, c-format
msgid "Paranoid"
msgstr "Paranoico"

#: ../../security/level.pm:1
#, c-format
msgid "Higher"
msgstr "Più alto"

#: ../../security/level.pm:1
#, c-format
msgid "High"
msgstr "Alto"

#: ../../security/level.pm:1
#, c-format
msgid "Poor"
msgstr "Debole"

#: ../../security/level.pm:1
#, c-format
msgid "Welcome To Crackers"
msgstr "Benvenuto ai cracker"

#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
"The success of MandrakeSoft is based upon the principle of Free Software. "
"Your new operating system is the result of collaborative work on the part of "
"the worldwide Linux Community"
msgstr ""

#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid "Welcome to the Open Source world"
msgstr ""

#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid "Thank you for choosing Mandrake Linux 9.1"
msgstr ""

#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
"To share your own knowledge and help build Linux tools, join the discussion "
"forums you'll find on our \"Community\" webpages"
msgstr ""

#: ../../share/advertising/02-community.pl:1
#, c-format
msgid "Want to know more about the Open Source community?"
msgstr ""

#: ../../share/advertising/02-community.pl:1
#, fuzzy, c-format
msgid "Get involved in the Free Software world"
msgstr "Unisciti al mondo del software libero"

#: ../../share/advertising/03-internet.pl:1
#, c-format
msgid ""
"Mandrake Linux 9.1 has selected the best software for you. Surf the Web and "
"view animations with Mozilla and Konqueror, or read your mail and handle "
"your personal information with Evolution and Kmail"
msgstr ""

#: ../../share/advertising/03-internet.pl:1
#, fuzzy, c-format
msgid "Get the most from the Internet"
msgstr "Connetti ad Internet"

#: ../../share/advertising/04-multimedia.pl:1
#, c-format
msgid ""
"Mandrake Linux 9.1 enables you to use the very latest software to play audio "
"files, edit and handle your images or photos, and play videos"
msgstr ""

#: ../../share/advertising/04-multimedia.pl:1
#, c-format
msgid "Push multimedia to its limits!"
msgstr ""

#: ../../share/advertising/04-multimedia.pl:1
#, c-format
msgid "Discover the most up-to-date graphical and multimedia tools!"
msgstr ""

#: ../../share/advertising/05-games.pl:1
#, c-format
msgid ""
"Mandrake Linux 9.1 provides the best Open Source games - arcade, action, "
"strategy, ..."
msgstr ""

#: ../../share/advertising/05-games.pl:1
#, c-format
msgid "Games"
msgstr "Giochi"

#: ../../share/advertising/06-mcc.pl:1
#, c-format
msgid ""
"Mandrake Linux 9.1 provides a powerful tool to fully customize and configure "
"your machine"
msgstr ""

#: ../../share/advertising/06-mcc.pl:1 ../../standalone/drakbug:1
#, c-format
msgid "Mandrake Control Center"
msgstr "Centro di Controllo Mandrake"

#: ../../share/advertising/07-desktop.pl:1
#, c-format
msgid ""
"Mandrake Linux 9.1 provides you with 11 user interfaces that can be fully "
"modified: KDE 3, Gnome 2, WindowMaker, ..."
msgstr ""

#: ../../share/advertising/07-desktop.pl:1
#, c-format
msgid "User interfaces"
msgstr "Interfacce utente"

#: ../../share/advertising/08-development.pl:1
#, c-format
msgid ""
"Use the full power of the GNU gcc 3 compiler as well as the best Open Source "
"development environments"
msgstr ""

#: ../../share/advertising/08-development.pl:1
#, c-format
msgid "Mandrake Linux 9.1 is the ultimate development platform"
msgstr ""

#: ../../share/advertising/08-development.pl:1
#, fuzzy, c-format
msgid "Development simplified"
msgstr "Sviluppo"

#: ../../share/advertising/09-server.pl:1
#, c-format
msgid ""
"Transform your machine into a powerful Linux server with a few clicks of "
"your mouse: Web server, mail, firewall, router, file and print server, ..."
msgstr ""

#: ../../share/advertising/09-server.pl:1
#, c-format
msgid "Turn your machine into a reliable server"
msgstr ""

#: ../../share/advertising/10-mnf.pl:1
#, c-format
msgid "This product is available on MandrakeStore website"
msgstr ""

#: ../../share/advertising/10-mnf.pl:1
#, c-format
msgid ""
"This firewall product includes network features that allow you to fulfill "
"all your security needs"
msgstr ""

#: ../../share/advertising/10-mnf.pl:1
#, c-format
msgid ""
"The MandrakeSecurity range includes the Multi Network Firewall product (M.N."
"F.)"
msgstr ""

#: ../../share/advertising/10-mnf.pl:1
#, c-format
msgid "Optimize your security"
msgstr ""

#: ../../share/advertising/11-mdkstore.pl:1
#, c-format
msgid ""
"Our full range of Linux solutions, as well as special offers on products and "
"other \"goodies,\" are available online on our e-store:"
msgstr ""

#: ../../share/advertising/11-mdkstore.pl:1
#, c-format
msgid "The official MandrakeSoft store"
msgstr ""

#: ../../share/advertising/12-mdkstore.pl:1
#, c-format
msgid ""
"MandrakeSoft works alongside a selection of companies offering professional "
"solutions compatible with Mandrake Linux. A list of these partners is "
"available on the MandrakeStore"
msgstr ""

#: ../../share/advertising/12-mdkstore.pl:1
#, c-format
msgid "Strategic partners"
msgstr ""

#: ../../share/advertising/13-mdkcampus.pl:1
#, c-format
msgid ""
"Whether you choose to teach yourself online or via our network of training "
"partners, the Linux-Campus catalogue prepares you for the acknowledged LPI "
"certification program (worldwide professional technical certification)"
msgstr ""

#: ../../share/advertising/13-mdkcampus.pl:1
#, c-format
msgid "Certify yourself on Linux"
msgstr ""

#: ../../share/advertising/13-mdkcampus.pl:1
#, c-format
msgid ""
"The training program has been created to respond to the needs of both end "
"users and experts (Network and System administrators)"
msgstr ""

#: ../../share/advertising/13-mdkcampus.pl:1
#, c-format
msgid "Discover MandrakeSoft's training catalogue Linux-Campus"
msgstr ""

#: ../../share/advertising/14-mdkexpert.pl:1
#, c-format
msgid ""
"Join the MandrakeSoft support teams and the Linux Community online to share "
"your knowledge and help others by becoming a recognized Expert on the online "
"technical support website:"
msgstr ""

#: ../../share/advertising/14-mdkexpert.pl:1
#, c-format
msgid ""
"Find the solutions of your problems via MandrakeSoft's online support "
"platform"
msgstr ""

#: ../../share/advertising/14-mdkexpert.pl:1
#, c-format
msgid "Become a MandrakeExpert"
msgstr ""

#: ../../share/advertising/15-mdkexpert-corporate.pl:1
#, c-format
msgid ""
"All incidents will be followed up by a single qualified MandrakeSoft "
"technical expert."
msgstr ""

#: ../../share/advertising/15-mdkexpert-corporate.pl:1
#, c-format
msgid "An online platform to respond to company's specific support needs"
msgstr ""

#: ../../share/advertising/15-mdkexpert-corporate.pl:1
#, fuzzy, c-format
msgid "MandrakeExpert Corporate"
msgstr "Centro di Controllo Mandrake"

#: ../../share/advertising/17-mdkclub.pl:1
#, c-format
msgid ""
"MandrakeClub and Mandrake Corporate Club were created for business and "
"private users of Mandrake Linux who would like to directly support their "
"favorite Linux distribution while also receiving special privileges. If you "
"enjoy our products, if your company benefits from our products to gain a "
"competititve edge, if you want to support Mandrake Linux development, join "
"MandrakeClub!"
msgstr ""

#: ../../share/advertising/17-mdkclub.pl:1
#, c-format
msgid "Discover MandrakeClub and Mandrake Corporate Club"
msgstr ""

#: ../../standalone/XFdrake:1
#, c-format
msgid "Please relog into %s to activate the changes"
msgstr "Per favore rientra come %s per attivare le modifiche"

#: ../../standalone/XFdrake:1
#, c-format
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "Per favore esci e usa Ctrl-Alt-Backspace"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Need to create /etc/dhcpd.conf first!"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Something went wrong! - Is mkisofs installed?"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Etherboot ISO image is %s"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "No floppy drive available!"
msgstr "Nessun drive floppy disponibile!"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Floppy can be removed now"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Couldn't access the floppy!"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Please insert floppy disk:"
msgstr "Per favore inserisci il floppy disk:"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Write Config"
msgstr "Scrivi configurazione"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Dynamic IP Address Pool:"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"Most of these values were extracted\n"
"from your running system.\n"
"You can modify as needed."
msgstr ""

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid "dhcpd Server Configuration"
msgstr "Configurazione avanzata"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "IP Range End:"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "IP Range Start:"
msgstr ""

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid "Name Servers:"
msgstr "Server NIS"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Domain Name:"
msgstr "Nome dominio:"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Broadcast Address:"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Subnet Mask:"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Routers:"
msgstr ""

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid "Netmask:"
msgstr "Netmask"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Subnet:"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"Need to restart the Display Manager for full changes to take effect. \n"
"(service dm restart - at the console)"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "dhcpd Config..."
msgstr "Configurazione dhcpd ..."

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Delete Client"
msgstr "Rimuovi client"

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid "<-- Edit Client"
msgstr "<-- Rimuovi client"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Add Client -->"
msgstr "Aggiungi client -->"

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid "Allow Thin Clients"
msgstr "Aggiungi/Rimuovi client"

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid "Thin Client"
msgstr "Cliente DHCP"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "No net boot images created!"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "type: %s"
msgstr "tipo: %s"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "<-- Del User"
msgstr "<-- Rimuovi utente"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Add User -->"
msgstr "Aggiungi utente -->"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"!!! Indicates the password in the system database is different than\n"
" the one in the Terminal Server database.\n"
"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Delete All NBIs"
msgstr "Cancella tutti i NBI"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "<-- Delete"
msgstr "<-- Cancella"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "This will take a few minutes."
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Build All Kernels -->"
msgstr ""

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid "No NIC selected!"
msgstr "Nessuna NIC selezionata!"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Build Single NIC -->"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "No kernel selected!"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Build Whole Kernel -->"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Boot ISO"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Boot Floppy"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"drakTermServ Overview\n"
"\t\t\t   \n"
"        - Create Etherboot Enabled Boot Images:\n"
"        \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
"must be created.\n"
"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
"graphical interface\n"
"        \t\tto help manage/customize these images.\n"
"\n"
"        - Maintain /etc/dhcpd.conf:\n"
"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
"assigning an IP address\n"
"        \t\tand net boot images to the machine. drakTermServ helps create/"
"remove these entries.\n"
"\t\t\t\n"
"        \t\t(PCI cards may omit the image - etherboot will request the "
"correct image. You should\n"
"        \t\talso consider that when etherboot looks for the images, it "
"expects names like\n"
"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
"\t\t\t \n"
"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
"like:\n"
"        \t\t\n"
"\t\t\t\thost curly {\n"
"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
"\t\t\t\t\tfixed-address              192.168.192.3;\n"
"\t\t\t\t\t#type                          fat;\n"
"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
"nbi\";\n"
"\t\t\t\t}\n"
"\t\t\t\n"
"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
"entry for\n"
"\t\t\ta client machine, using a fixed address scheme facilitates using the "
"functionality\n"
"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
"\t\t\t\n"
"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
"either be \"thin\"\n"
"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
"while fat clients run most\n"
"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
"$IP=client_ip\\$\\$ is\n"
"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
"gdm.conf are modified\n"
"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
"issues in using xdmcp,\n"
"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
"subnet.\n"
"\t\t\t\n"
"\t\t\tNote: You must stop/start the server after adding or changing "
"clients.\n"
"\t\t\t\n"
"        - Maintain /etc/exports:\n"
"        \t\tClusternfs allows export of the root filesystem to diskless "
"clients. drakTermServ\n"
"        \t\tsets up the correct entry to allow anonymous access to the root "
"filesystem from\n"
"        \t\tdiskless clients.\n"
"\n"
"        \t\tA typical exports entry for clusternfs is:\n"
"        \t\t\n"
"        \t\t/                  (ro,all_squash)\n"
"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
"\t\t\t\n"
"\t\t\tWith SUBNET/MASK being defined for your network.\n"
"        \t\t\n"
"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
"        \t\tFor users to be able to log into the system from a diskless "
"client, their entry in\n"
"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
"\\$. drakTermServ helps\n"
"        \t\tin this respect by adding or removing system users from this "
"file.\n"
"\n"
"        - Per client /etc/X11XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
"        \t\tThrough clusternfs, each diskless client can have it's own "
"unique configuration files\n"
"        \t\ton the root filesystem of the server. In the future drakTermServ "
"will help create these\n"
"        \t\tfiles.\n"
"\n"
"        - Per client system configuration files:\n"
"        \t\tThrough clusternfs, each diskless client can have it's own "
"unique configuration files\n"
"        \t\ton the root filesystem of the server. In the future, "
"drakTermServ can help create files\n"
"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
"keyboard on a per-client\n"
"        \t\tbasis.\n"
"\n"
"        - /etc/xinetd.d/tftp:\n"
"        \t\tdrakTermServ will configure this file to work in conjunction "
"with the images created by\n"
"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
"the boot image to each\n"
"        \t\tdiskless client.\n"
"\n"
"        \t\tA typical tftp configuration file looks like:\n"
"        \t\t\n"
"        \t\tservice tftp\n"
"        \t\t(\n"
"                        disable         = no\n"
"                        socket_type  = dgram\n"
"                        protocol        = udp\n"
"                        wait             = yes\n"
"                        user             = root\n"
"                        server          = /usr/sbin/in.tftpd\n"
"                        server_args  = -s /var/lib/tftpboot\n"
"        \t\t}\n"
"        \t\t\n"
"        \t\tThe changes here from the default installation are changing the "
"disable flag to\n"
"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
"mkinitrd-net\n"
"        \t\tputs it's images.\n"
"\n"
"        - Create etherboot floppies/CDs:\n"
"        \t\tThe diskless client machines need either ROM images on the NIC, "
"or a boot floppy\n"
"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
"generate these images,\n"
"        \t\tbased on the NIC in the client machine.\n"
"        \t\t\n"
"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
"manually:\n"
"        \t\t\n"
"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
" \n"
"\n"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"\n"
"\n"
" Thanks:\n"
"\t- LTSP Project http://www.ltsp.org\n"
"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
"\n"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"\n"
" Copyright (C) 2002 by MandrakeSoft \n"
"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
"\n"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Add/Del Clients"
msgstr "Aggiungi/Rimuovi client"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Add/Del Users"
msgstr "Aggiungi/Rimuovi utenti"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Net Boot Images"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Etherboot Floppy/ISO"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Stop Server"
msgstr "Ferma il server"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Start Server"
msgstr "Avvia il server"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Disable Server"
msgstr "Disabilita il server"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Enable Server"
msgstr "Abilita il server"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Mandrake Terminal Server Configuration"
msgstr "Configurazione del Terminal Server Mandrake"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Remove the last item"
msgstr "Rimuovi l'ultima voce"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Add an item"
msgstr "Aggiungi una voce"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Auto Install"
msgstr "Installazione automatica"

#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""

#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Congratulations!"
msgstr "Congratulazioni!"

#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
"\n"
"Welcome.\n"
"\n"
"The parameters of the auto-install are available in the sections on the left"
msgstr ""

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Creating auto install floppy"
msgstr "Sto creando il floppy di installazione automatica"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "manual"
msgstr ""

#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr ""

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Automatic Steps Configuration"
msgstr "Configurazione automatica fasi di installazione"

#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
msgid "replay"
msgstr "Ripeti"

#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Do you want to continue?"
msgstr ""

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Auto Install Configurator"
msgstr "Configurazione installazione automatica"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "I can't find needed image file `%s'."
msgstr ""

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Error!"
msgstr "Errore!"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Restore Backup Problems:\n"
"\n"
"During the restore step, Drakbackup will verify all your\n"
"backup files before restoring them.\n"
"Before the restore, Drakbackup will remove \n"
"your original directory, and you will loose all your \n"
"data. It is important to be careful and not modify the \n"
"backup data files by hand.\n"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"options description:\n"
"\n"
"Please be careful when you are using ftp backup, because only \n"
"backups that are already built are sent to the server.\n"
"So at the moment, you need to build the backup on your hard \n"
"drive before sending it to the server.\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Description:\n"
"\n"
"  Drakbackup is used to backup your system.\n"
"  During the configuration you can select: \n"
"\t- System files, \n"
"\t- Users files, \n"
"\t- Other files.\n"
"\tor All your system ...  and Other (like Windows Partitions)\n"
"\n"
"  Drakbackup allows you to backup your system on:\n"
"\t- Harddrive.\n"
"\t- NFS.\n"
"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
"\t- FTP.\n"
"\t- Rsync.\n"
"\t- Webdav.\n"
"\t- Tape.\n"
"\n"
"  Drakbackup allows you to restore your system to\n"
"  a user selected directory.\n"
"\n"
"  Per default all backups will be stored on your\n"
"  /var/lib/drakbackup directory\n"
"\n"
"  Configuration file:\n"
"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
"\n"
"Restore Step:\n"
"  \n"
"  During the restore step, DrakBackup will remove \n"
"  your original directory and verify that all \n"
"  backup files are not corrupted. It is recommended \n"
"  you do a last backup before restoring.\n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
"fr>"
msgstr ""
" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
"fr>"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"restore description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
"\n"
"So if you don't want to restore a user please unselect all their\n"
"check boxes.\n"
"\n"
"Otherwise, you are able to select only one of these.\n"
"\n"
" - Incremental Backups:\n"
"\n"
"\tThe incremental backup is the most powerful \n"
"\toption to use. This option allows you to \n"
"\tbackup all of your data the first time, and \n"
"\tonly the changed data after.\n"
"\tSo you will be able, during the restore\n"
"\tstep, to restore your data from a specified\n"
"\tdate.\n"
"\tIf you have not selected this option all\n"
"\told backups are deleted before each backup.    \n"
"\n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"options description:\n"
"\n"
" - Backup system files:\n"
"       \n"
"\tThis option allows you to backup your /etc directory,\n"
"\twhich contains all configuration files. Please be\n"
"\tcareful during the restore step to not overwrite:\n"
"\t\t/etc/passwd \n"
"\t\t/etc/group \n"
"\t\t/etc/fstab\n"
"\n"
" - Backup User files: \n"
"\n"
"\tThis option allows you select all users that you want \n"
"\tto backup.\n"
"\tTo preserve disk space, it is recommended that you \n"
"\tdo not include the web browser's cache.\n"
"\n"
" - Backup Other files: \n"
"\n"
"\tThis option allows you to add more data to save.\n"
"\tWith the other backup it's not possible at the \n"
"\tmoment to select incremental backup.\t\t\n"
" \n"
" - Incremental Backups:\n"
"\n"
"\tThe incremental backup is the most powerful \n"
"\toption for backup. This option allows you \n"
"\tto backup all your data the first time, and \n"
"\tonly the changed data afterward.\n"
"\tThen you will be able, during the restore\n"
"\tstep, to restore your data from a specified\n"
"\tdate.\n"
"\tIf you have not selected this option all\n"
"\told backups are deleted before each backup.    \n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
" Some errors during sendmail are caused by \n"
" a bad configuration of postfix. To solve it you have to\n"
" set myhostname or mydomain in /etc/postfix/main.cf\n"
"\n"
msgstr ""
"\n"
"Alcuni errori nell'invio della posta sono causati da\n"
"un'errata configurazione di postfix. Per risolvere il problema\n"
"dovete indicare ilmionomehost o ilmiodominio in /etc/postfix/main.cf\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"options description:\n"
"\n"
" In this step Drakbackup allow you to change:\n"
"\n"
" - The compression mode:\n"
"    \n"
"      If you check bzip2 compression, you will compress\n"
"      your data better than gzip (about 2-10 %%).\n"
"      This option is not checked by default because\n"
"      this compression mode needs more time (about 1000%% more).\n"
" \n"
" - The update mode:\n"
"\n"
"      This option will update your backup, but this\n"
"      option is not really useful because you need to\n"
"      decompress your backup before you can update it.\n"
"      \n"
" - the .backupignore mode:\n"
"\n"
"      Like with cvs, Drakbackup will ignore all references\n"
"      included in .backupignore files in each directories.\n"
"      ex: \n"
"         #> cat .backupignore\n"
"         *.o\n"
"         *~\n"
"         ...\n"
"      \n"
"\n"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Drakbackup"
msgstr "Drakbackup"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore"
msgstr "Ripristina"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup Now"
msgstr "Effettua il backup adesso"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Advanced Configuration"
msgstr "Configurazione avanzata"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Wizard Configuration"
msgstr "Configurazione dell'assistente"

#: ../../standalone/drakbackup:1
#, c-format
msgid "View Backup Configuration."
msgstr "Vedi la configurazione di backup"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup Now from configuration file"
msgstr "Effettua il backup adesso sulla base del file di configurazione"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Drakbackup Configuration"
msgstr "Configurazione di Drakbackup"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Total Progress"
msgstr "Progresso totale"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Sending files..."
msgstr "Sto inviando i file ..."

#: ../../standalone/drakbackup:1
#, c-format
msgid "files sending by FTP"
msgstr "trasmissione file via FTP"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup other files"
msgstr "Backup di altri file"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup user files"
msgstr "Backup dei file degli utenti"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup system files"
msgstr "Backup dei file di sistema"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Under Devel ... please wait."
msgstr "Ancora in sviluppo ... attendere per favore."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"No configuration file found \n"
"please click Wizard or Advanced."
msgstr ""
"Nessun file di configurazione trovato\n"
"per favore cliccate su Assistente o Avanzato"

#: ../../standalone/drakbackup:1
#, c-format
msgid "%s"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please select data to backup..."
msgstr "Per favore, scegliete il tipo del vostro mouse."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please select media for backup..."
msgstr "Per favore, scegliete il tipo del vostro mouse."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please select data to restore..."
msgstr "Per favore, scegliete il tipo del vostro mouse."

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "The following packages need to be installed:\n"
msgstr "I seguenti pacchetti stanno per essere installati"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
"Error during sending file via FTP.\n"
" Please correct your FTP configuration."
msgstr ""
"Errore nella trasmissione del file via FTP.\n"
" Per favore, controllate la configurazione FTP."

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
"Error during sendmail.\n"
"  Your report mail was not sent.\n"
"  Please configure sendmail"
msgstr ""
"Errore usando sendmail\n"
"  la vostra mail di report non è stata inviata\n"
"  Per favore configurate sendmail"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Next"
msgstr "Successivo"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Previous"
msgstr "Precedente"

#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
#: ../../standalone/logdrake:1
#, c-format
msgid "Save"
msgstr "Salva"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Build Backup"
msgstr "Costruisci backup"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Restore Progress"
msgstr "Ripristina utenti"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Restore From Catalog"
msgstr "Ripristina tabella delle partizioni"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Browse to new restore repository."
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "CD in place - continue."
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Custom Restore"
msgstr "Personalizza il ripristino"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore all backups"
msgstr "Ripristina tutti i backup"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Restore Failed..."
msgstr "Ripristina altro"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Files Restored..."
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Path or Module required"
msgstr ""

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Hostname required"
msgstr "Nome host: "

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Username required"
msgstr "Nome utente"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Password required"
msgstr "Password"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Host Path or Module"
msgstr ""

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Host Name"
msgstr "Nome host"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Via Network Protocol: %s"
msgstr ""

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Restore Via Network"
msgstr "Ripristina utenti"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Not the correct tape label. Tape is labelled %s."
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Insert the tape with volume label %s\n"
" in the tape drive device %s"
msgstr ""

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Restore From Tape"
msgstr "Ripristina tabella delle partizioni"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Not the correct CD label. Disk is labelled %s."
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Insert the CD with volume label %s\n"
" in the CD drive under mount point /mnt/cdrom"
msgstr ""

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Restore From CD"
msgstr "Ripristina da disco rigido"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Backup files not found at %s."
msgstr "I file di backup sono corrotti"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
"Change\n"
"Restore Path"
msgstr "Ripristina altro"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
"Restore Selected\n"
"Files"
msgstr "Rimuovi quelli selezionati"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Restore Selected\n"
"Catalog Entry"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Remove user directories before restore."
msgstr "Rimuovi le directory dell'utente prima del ripristino."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Do new backup before restore (only for incremental backups.)"
msgstr ""
"Effettua nuovo backup prima del ripristino (solo per backup incrementali)."

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "select path to restore (instead of /)"
msgstr "selezionate il percorso del ripristino (invece di / )"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Other"
msgstr "Ripristina altro"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Users"
msgstr "Ripristina utenti"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore system"
msgstr "Ripristina sistema"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Other Media"
msgstr "Altri supporti"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Select another media to restore from"
msgstr "Scegliete un altro supporto dal quale effettuare il ripristino"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please enter the directory where backups are stored"
msgstr "Per favore, indicate la directory in cui sono archiviati i backup"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore from Hard Disk."
msgstr "Ripristina da disco rigido"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use quota for backup files."
msgstr "Usa una quota per i file di backup."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Please enter the maximum size\n"
" allowed for Drakbackup"
msgstr ""
"Per favore, indicate le dimensioni massime\n"
"concesse a Drakbackup"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please enter the directory to save:"
msgstr "Per favore inserisci la directory da salvare:"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use Hard Disk to backup"
msgstr "Usa il disco rigido per effettuare il backup"

#: ../../standalone/drakbackup:1
#, c-format
msgid "please choose the date to restore"
msgstr "Per favore, scegliete la data da ripristinare"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup the system files before:"
msgstr "Effettua il backup dei file di sistema prima di:"

#: ../../standalone/drakbackup:1
#, c-format
msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
"Lista degli utenti da ripristinare (solo la data più recente per utente è "
"importante)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "OK to restore the other files."
msgstr "OK al ripristino degli altri file"

#: ../../standalone/drakbackup:1
#, c-format
msgid "         Restore Configuration       "
msgstr "         Ripristina configurazione       "

#: ../../standalone/drakbackup:1
#, c-format
msgid "          Successfuly Restored on %s       "
msgstr "          Ripristinati con successo su %s       "

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "          All of your selected data have been          "
msgstr "          Tutti i dati selezionati sono stati          "

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup files are corrupted"
msgstr "I file di backup sono corrotti"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please uncheck or remove it on next time."
msgstr "Per favore scegliete a che porta seriale è connesso il vostro modem."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"List of data corrupted:\n"
"\n"
msgstr "Lista di dati corrotti:\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"List of data to restore:\n"
"\n"
msgstr "Lista di dati da ripristinare:\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""
"Nessun file di configurazione, per favore cliccate su Assistente o "
"Avanzato.\n"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "\t-Network by webdav.\n"
msgstr "\t-Rete via FTP.\n"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "\t-Network by rsync.\n"
msgstr "\t-Rete via FTP.\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Network by SSH.\n"
msgstr "\t-Rete via SSH.\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Network by FTP.\n"
msgstr "\t-Rete via FTP.\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Tape \n"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-CDROM.\n"
msgstr "\t-CDROM.\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Hard drive.\n"
msgstr "\t-Disco rigido.\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Daemon (%s) include:\n"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "\tBackups use tar and gzip\n"
msgstr "\tI backup fanno uso di tar e gzip\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\tBackups use tar and bzip2\n"
msgstr "\tEffettua backup usando tar e bzip2\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\tDo not include System Files\n"
msgstr "\tNon includere file di sistema\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Options:\n"
msgstr ""
"\n"
"-Opzioni:\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\t\t user name: %s\n"
"\t\t on path: %s \n"
msgstr ""
"\t\t nome utente: %s\n"
"\t\t sul percorso: %s \n"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
"\n"
"- Save via %s on host: %s\n"
msgstr ""
"\n"
"- Salva via FTP sull'host: %s\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t\tErase=%s"
msgstr ""

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
"\n"
"- Save to Tape on device: %s"
msgstr ""
"\n"
"- Salva via FTP sull'host: %s\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid " (multi-session)"
msgstr ""

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid " on device: %s"
msgstr "Dispositivo del mouse: %s\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "RW"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Burn to CD"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Delete hard drive tar files after backup.\n"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Save on Hard drive on path: %s\n"
msgstr ""
"\n"
"- Salva su disco rigido seguendo il percorso: %s\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Other Files:\n"
msgstr ""
"\n"
"- Altri file:\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- User Files:\n"
msgstr ""
"\n"
"- File degli utenti:\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- System Files:\n"
msgstr ""
"\n"
"- File di sistema:\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Backup Sources: \n"
msgstr ""
"\n"
"Fonti del backup: \n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Select user manually"
msgstr "Seleziona l'utente manualmente"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup Users"
msgstr "Fai il backup degli utenti"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup system"
msgstr "Sistema di backup"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please choose what you want to backup"
msgstr "Per favore scegliete i pacchetti che volete installare."

#: ../../standalone/drakbackup:1
#, c-format
msgid "on Tape Device"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "on CDROM"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "across Network"
msgstr "sulla rete"

#: ../../standalone/drakbackup:1
#, c-format
msgid "on Hard Drive"
msgstr "sul disco rigido"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please choose where you want to backup"
msgstr "Per favore scegliete dove volete effettuare il backup"

#: ../../standalone/drakbackup:1
#, c-format
msgid "More Options"
msgstr "Altre opzioni"

#: ../../standalone/drakbackup:1
#, c-format
msgid "When"
msgstr "Quando"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Where"
msgstr "Dove"

#: ../../standalone/drakbackup:1
#, c-format
msgid "What"
msgstr "Cosa"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Send mail report after each backup to:"
msgstr "Dopo ogni backup invia una mail rapporto a:"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
"Please be sure that the cron daemon is included in your services. \n"
"\n"
"Note that currently all 'net' medias also use the hard drive."
msgstr ""
"Per favore, accertatevi che il demone cron sia incluso fra i servizi attivi"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Please choose the\n"
"media for backup."
msgstr ""
"Per favore, scegli il supporto\n"
"del backup"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Please choose the time \n"
"interval between each backup"
msgstr ""
"Per favore, scegli la frequenza\n"
"del backup"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use daemon"
msgstr "Usa demone"

#: ../../standalone/drakbackup:1
#, c-format
msgid "monthly"
msgstr "ogni mese"

#: ../../standalone/drakbackup:1
#, c-format
msgid "weekly"
msgstr "settimanale"

#: ../../standalone/drakbackup:1
#, c-format
msgid "daily"
msgstr "ogni giorno"

#: ../../standalone/drakbackup:1
#, c-format
msgid "hourly"
msgstr "ogni ora"

#: ../../standalone/drakbackup:1
#, c-format
msgid "HardDrive / NFS"
msgstr "Disco rigido  / NFS"

#: ../../standalone/drakbackup:1
#, c-format
msgid "CDROM / DVDROM"
msgstr ""

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Please enter the directory to save to:"
msgstr "Per favore inserisci la directory da salvare:"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Please check if you want to eject your tape after the backup."
msgstr "Per favore scegli tutti gli utenti che vuoi includere nel backup"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Please check if you want to erase your tape before the backup."
msgstr "Per favore scegli tutti gli utenti che vuoi includere nel backup"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Please check if you want to use the non-rewinding device."
msgstr "Per favore scegli tutti gli utenti che vuoi includere nel backup"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please enter the device name to use for backup"
msgstr "Per favore, inserite il nome del dispositivo da usare per il backup"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use tape to backup"
msgstr "Usa unità a nastro per effettuare il backup"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "No CD device defined!"
msgstr "Scegli file"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Please enter your CD Writer device name\n"
" ex: 0,1,0"
msgstr ""
"Per favore, inserite il numero che identifica il vostro masterizzatore\n"
"ad esempio: 0,1,0"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Please check if you are using a DVDRAM device"
msgstr "Per favore, accertatevi di usare supporti CD-RW"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Please check if you are using a DVDR device"
msgstr "Per favore, accertatevi di usare supporti CD-RW"

#: ../../standalone/drakbackup:1
#, c-format
msgid " Erase Now "
msgstr ""

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Please check if you want to erase your RW media (1st Session)"
msgstr "Per favore, accertatevi di usare supporti CD-RW"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please check if you are using CDRW media"
msgstr "Per favore, accertatevi di usare supporti CD-RW"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Please check for multisession CD"
msgstr "Per favore, accertatevi di usare supporti CD-RW"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Please choose your CD/DVD media size (Mb)"
msgstr "Per favore, scegliete lo spazio su CD"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Please choose your CD/DVD device\n"
"(Press Enter to propogate settings to other fields.\n"
"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use CD/DVDROM to backup"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Need hostname, username and password!"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Remember this password"
msgstr "Ricorda questa password"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please enter your password"
msgstr "Per favore inserisci la tua password"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please enter your login"
msgstr "Per favore inserisci il tuo nome di login"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
"Please enter the directory (or module) to\n"
" put the backup on this host."
msgstr "Per favore, indicate la directory in cui sono archiviati i backup"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please enter the host name or IP."
msgstr "Per favore inserisci il nome dell'host o l'IP"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Other (not drakbackup)\n"
"keys in place already"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"  Transfer  \n"
"Now"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Create/Transfer\n"
"backup keys for SSH"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use Expect for SSH"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Net Method:"
msgstr ""

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Use network connection to backup"
msgstr "Usa unità a nastro per effettuare il backup"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Users"
msgstr "Utenti"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Windows (FAT32)"
msgstr "Windows (FAT32)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use Incremental Backups  (do not replace old backups)"
msgstr "Usa backup incrementali (non sostituire i vecchi backup)"

#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
msgid "Remove Selected"
msgstr "Rimuovi quelli selezionati"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Do not include the browser cache"
msgstr "Non includere la cache del navigatore"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please check all users that you want to include in your backup."
msgstr "Per favore scegli tutti gli utenti che vuoi includere nel backup"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"With this option you will be able to restore any version\n"
" of your /etc directory."
msgstr ""
"Grazie a questa opzione sarete in grado di ripristinare ogni versione della\n"
"vostra directory /etc."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Do not include critical files (passwd, group, fstab)"
msgstr "Non includere file critici (passwd, group, fstab)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use incremental backup  (do not replace old backups)"
msgstr "Usa backup incrementali (non sostituire i vecchi backup)"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Backup your System files. (/etc directory)"
msgstr "Backup dei vostri file di sistema (directory /etc)"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
"Queste opzioni possono effettuare il backup e il ripristino di tutti i file "
"nella\n"
"vostra directory /etc.\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Please check all options that you need.\n"
msgstr ""
"\n"
"Per favore abilitate tutte le opzioni necessarie\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Select the files or directories and click on 'Add'"
msgstr "Selezionate i file e le directory e cliccate su \"Aggiungi\""

#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
msgid "File Selection"
msgstr "Selezione file"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Can't create catalog!"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid " Error while sending mail. \n"
msgstr "Errore durante l'invio della mail. \n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Drakbackup activities via tape:\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Drakbackup activities via CD:\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Drakbackup activities via %s:\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
" FTP connection problem: It was not possible to send your backup files by "
"FTP.\n"
msgstr ""

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
"file list sent by FTP: %s\n"
" "
msgstr "trasmissione file via FTP"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "No changes to backup!"
msgstr "Usa unità a nastro per effettuare il backup"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Hard Disk Backup files..."
msgstr "File di backup su disco rigido..."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup Other files..."
msgstr "Backup di altri file"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Hard Disk Backup Progress..."
msgstr "Progresso del backup del disco rigido..."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup User files..."
msgstr "Backup dei file dell'utente"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup system files..."
msgstr "Backup dei file di sistema..."

#: ../../standalone/drakbackup:1
#, c-format
msgid "No tape in %s!"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Permission problem accessing CD."
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "This may take a moment to erase the media."
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Not erasable media!"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Does not appear to be recordable media!"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "No CDR/DVDR in drive!"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "WebDAV transfer failed!"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "WebDAV remote site already in sync!"
msgstr ""

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Total progess"
msgstr "progresso totale"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Transfer successful\n"
"You may want to verify you can login to the server with:\n"
"\n"
"ssh -i %s %s\\@%s\n"
"\n"
"without being prompted for a password."
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "%s not responding"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Can't find %s on %s"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Permission denied transferring %s to %s"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Bad password on %s"
msgstr "Password non valida su %s"

#: ../../standalone/drakbackup:1
#, c-format
msgid "No password prompt on %s at port %s"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "ERROR: Cannot spawn %s."
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "This may take a moment to generate the keys."
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"%s exists, delete?\n"
"\n"
"Warning: If you've already done this process you'll probably\n"
" need to purge the entry from authorized_keys on the server."
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"                    DrakBackup Report Details\n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"                      DrakBackup Daemon Report\n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"                      DrakBackup Report \n"
"\n"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "INFO"
msgstr ""

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "FATAL"
msgstr "FAT"

#: ../../standalone/drakbackup:1
#, c-format
msgid "WARNING"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Cron not available yet as non-root"
msgstr ""

#: ../../standalone/drakboot:1
#, c-format
msgid "Installation of %s failed. The following error occured:"
msgstr "Installazione di %s fallita. Si è verificato il seguente errore:"

#: ../../standalone/drakboot:1
#, c-format
msgid "No, I don't want autologin"
msgstr "No, non voglio il login automatico"

#: ../../standalone/drakboot:1
#, c-format
msgid "Yes, I want autologin with this (user, desktop)"
msgstr "Sì, voglio il login automatico con questo utente e desktop:"

#: ../../standalone/drakboot:1
#, c-format
msgid "Launch the graphical environment when your system starts"
msgstr "Lancia l'ambiente grafico XFree all'avvio del sistema"

#: ../../standalone/drakboot:1
#, c-format
msgid "System mode"
msgstr "Come avviare il sistema"

#: ../../standalone/drakboot:1
#, c-format
msgid "Bootsplash"
msgstr "Bootsplash"

#: ../../standalone/drakboot:1
#, c-format
msgid "Lilo screen"
msgstr "Schermata di Lilo"

#: ../../standalone/drakboot:1
#, c-format
msgid ""
"\n"
"Select the theme for\n"
"lilo and bootsplash,\n"
"you can choose\n"
"them separately"
msgstr ""
"\n"
"Selezione di un tema per lilo\n"
"e bootsplash (sfondo del boot).\n"
"Possono essere scelti\n"
"separatamente"

#: ../../standalone/drakboot:1
#, c-format
msgid "Themes"
msgstr "Temi"

#: ../../standalone/drakboot:1
#, c-format
msgid "Splash selection"
msgstr "Selezione per Splash"

#: ../../standalone/drakboot:1
#, c-format
msgid ""
"You are currently using %s as your boot manager.\n"
"Click on Configure to launch the setup wizard."
msgstr ""
"Attualmente viene usato %s come boot-manager.\n"
"Fare clic su Configura per lanciare l'assistente di configurazione."

#: ../../standalone/drakboot:1
#, c-format
msgid "LiLo and Bootsplash themes installation successfull"
msgstr "L'installazione dei temi per LiLo e Bootsplash è riuscita"

# there is no room to put "Scegli classe d'installazione"
#: ../../standalone/drakboot:1
#, c-format
msgid "Theme installation failed!"
msgstr "L'installazione dei temi non è riuscita!"

#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, c-format
msgid "Notice"
msgstr "Avvertenza"

#: ../../standalone/drakboot:1
#, c-format
msgid "Relaunch 'lilo'"
msgstr "Rilancio di \"lilo\""

#: ../../standalone/drakboot:1
#, c-format
msgid ""
"Can't relaunch LiLo!\n"
"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
"Impossibile rilanciare LiLo!\n"
"Per completare l'installazione del tema per LiLo, root dovrà lanciare \"lilo"
"\" da riga di comando."

#: ../../standalone/drakboot:1
#, c-format
msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
msgstr "Eseguo initrd 'mkinitrd -f /boot/initrd-%s.img %s'."

#: ../../standalone/drakboot:1
#, c-format
msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
msgstr "Impossibile eseguire \"mkinitrd -f /boot/initrd-%s.img %s\"."

#: ../../standalone/drakboot:1
#, c-format
msgid ""
"Can't write /etc/sysconfig/bootsplash\n"
"File not found."
msgstr ""
"Impossibile scrivere su /etc/sysconfig/bootsplash.\n"
"Il file non si trova."

#: ../../standalone/drakboot:1
#, c-format
msgid "Write %s"
msgstr "Scrivi %s"

#: ../../standalone/drakboot:1
#, c-format
msgid "Can't write /etc/sysconfig/bootsplash."
msgstr "Impossibile scrivere su /etc/sysconfig/bootsplash."

#: ../../standalone/drakboot:1
#, c-format
msgid "Lilo message not found"
msgstr "Non trovo il messaggio di lilo"

#: ../../standalone/drakboot:1
#, c-format
msgid "Copy %s to %s"
msgstr "Copia di %s in %s"

#: ../../standalone/drakboot:1
#, c-format
msgid "Backup %s to %s.old"
msgstr "Copia di sicurezza di %s in %s.old"

#: ../../standalone/drakboot:1
#, c-format
msgid "Create new theme"
msgstr "Creare un nuovo tema"

#: ../../standalone/drakboot:1
#, c-format
msgid ""
"Display theme\n"
"under console"
msgstr ""
"Mostra il tema\n"
"sotto la console"

#: ../../standalone/drakboot:1
#, c-format
msgid "Install themes"
msgstr "Installa i temi"

#: ../../standalone/drakboot:1
#, c-format
msgid "Lilo/grub mode"
msgstr "Configurazione di LILO/GRUB"

#: ../../standalone/drakboot:1
#, c-format
msgid "Yaboot mode"
msgstr "Configurazione di Yaboot"

#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
msgid "<control>Q"
msgstr "<control>Q"

#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
#: ../../standalone/logdrake:1
#, c-format
msgid "/File/_Quit"
msgstr "/File/_Esci"

#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
msgid "/_File"
msgstr "/_File"

#: ../../standalone/drakboot:1
#, c-format
msgid "Boot Style Configuration"
msgstr "Configurazione stile di avvio"

#: ../../standalone/drakbug:1
#, c-format
msgid "No browser available! Please install one"
msgstr ""

#: ../../standalone/drakbug:1
#, c-format
msgid "connecting to Bugzilla wizard ..."
msgstr ""

#: ../../standalone/drakbug:1
#, fuzzy, c-format
msgid "Package not installed"
msgstr "Non installato"

#: ../../standalone/drakbug:1
#, c-format
msgid "Not installed"
msgstr "Non installato"

#: ../../standalone/drakbug:1
#, fuzzy, c-format
msgid "Standalone Tools"
msgstr "Programmi da linea di comando"

#: ../../standalone/drakbug:1
#, c-format
msgid "Report"
msgstr "Report"

#: ../../standalone/drakbug:1
#, c-format
msgid ""
"\n"
"\n"
"To submit a bug report, click on the button report.\n"
"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
" where you'll find a form to fill in.The information displayed above will "
"be \n"
"transferred to that server\n"
"\n"
msgstr ""

#: ../../standalone/drakbug:1
#, c-format
msgid "Release: "
msgstr "Versione: "

#: ../../standalone/drakbug:1
#, c-format
msgid "Kernel:"
msgstr ""

#: ../../standalone/drakbug:1
#, c-format
msgid "Package: "
msgstr "Pacchetto:"

#: ../../standalone/drakbug:1
#, c-format
msgid "Application:"
msgstr "Applicazione:"

#: ../../standalone/drakbug:1
#, c-format
msgid "Configuration Wizards"
msgstr "Assistenti di configurazione"

#: ../../standalone/drakbug:1
#, c-format
msgid "Userdrake"
msgstr "Userdrake"

#: ../../standalone/drakbug:1
#, c-format
msgid "Windows Migration tool"
msgstr ""

#: ../../standalone/drakbug:1
#, c-format
msgid "Urpmi"
msgstr ""

#: ../../standalone/drakbug:1
#, c-format
msgid "Software Manager"
msgstr "Software Manager"

#: ../../standalone/drakbug:1
#, c-format
msgid "Remote Control"
msgstr "Controllo remoto"

#: ../../standalone/drakbug:1
#, fuzzy, c-format
msgid "Msec"
msgstr "Mouse"

#: ../../standalone/drakbug:1
#, c-format
msgid "Menudrake"
msgstr "Menudrake"

#: ../../standalone/drakbug:1
#, c-format
msgid "Mandrake Online"
msgstr "Mandrake Online"

#: ../../standalone/drakbug:1
#, c-format
msgid "HardDrake"
msgstr "HardDrake"

#: ../../standalone/drakbug:1
#, c-format
msgid "Synchronization tool"
msgstr ""

#: ../../standalone/drakbug:1
#, fuzzy, c-format
msgid "First Time Wizard"
msgstr "Benvenuto nell'assistente della prima volta"

#: ../../standalone/drakbug:1
#, c-format
msgid "Mandrake Bug Report Tool"
msgstr ""

#: ../../standalone/drakconnect:1
#, c-format
msgid "Parameters"
msgstr "Parametri"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Internet Connection Configuration"
msgstr "Configurazione della connessione ad Internet"

#: ../../standalone/drakconnect:1
#, c-format
msgid "DHCP Client"
msgstr "Cliente DHCP"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Ethernet Card"
msgstr "Scheda ethernet"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Gateway"
msgstr "Gateway"

#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
msgid "Connection type: "
msgstr "Tipo di connessione: "

#: ../../standalone/drakconnect:1
#, c-format
msgid "Profile: "
msgstr "Profilo: "

#: ../../standalone/drakconnect:1
#, c-format
msgid "Internet connection configuration"
msgstr "Configurazione della connessione ad Internet"

#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"You don't have an Internet connection.\n"
"Create one first by clicking on 'Configure'"
msgstr ""
"Non disponi di una connessione ad Internet.\n"
"Creane una facendo clic su \"Configura\""

#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"This interface has not been configured yet.\n"
"Launch the configuration wizard in the main window"
msgstr ""
"Questa interfaccia non è stata ancora configurata.\n"
"Lanciate l'assistente di configurazione nella finestra principale."

#: ../../standalone/drakconnect:1
#, c-format
msgid "activate now"
msgstr "attivare adesso"

#: ../../standalone/drakconnect:1
#, c-format
msgid "deactivate now"
msgstr "disattivare adesso"

#: ../../standalone/drakconnect:1
#, c-format
msgid "DHCP client"
msgstr "Cliente DHCP"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Started on boot"
msgstr "Attivato/a al momento del boot"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Boot Protocol"
msgstr "Protocollo di boot"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Adapter %s: %s"
msgstr "Adattatore %s: %s"

#: ../../standalone/drakconnect:1
#, c-format
msgid "LAN Configuration"
msgstr "Configurazione rete locale (LAN)"

#: ../../standalone/drakconnect:1
#, c-format
msgid "LAN configuration"
msgstr "Configurazione LAN (rete locale)"

#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"You don't have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""
"Non disponi di nessuna interfaccia configurata.\n"
"Per prima cosa configurale facendo clic su \"Configura\""

#: ../../standalone/drakconnect:1
#, c-format
msgid "Connect..."
msgstr "Connetti..."

#: ../../standalone/drakconnect:1
#, c-format
msgid "Disconnect..."
msgstr "Disconnetti..."

#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
msgid "Not connected"
msgstr "Non connesso"

#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
msgid "Connected"
msgstr "Connesso"

#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"Warning, another Internet connection has been detected, maybe using your "
"network"
msgstr ""
"Attenzione, è stata individuata un'altra connessione ad Internet, forse "
"attraverso la vostra rete locale"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Interface:"
msgstr "Interfaccia:"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Gateway:"
msgstr "Gateway:"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Apply"
msgstr "Applica"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Click here to launch the wizard ->"
msgstr "Cliccate qui per lanciare l'assistente ->"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Wizard..."
msgstr "Assistente..."

#: ../../standalone/drakconnect:1
#, c-format
msgid "Status:"
msgstr "Status:"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Type:"
msgstr "Tipo:"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Internet access"
msgstr "Accesso ad Internet"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Hostname: "
msgstr "Nome host: "

#: ../../standalone/drakconnect:1
#, c-format
msgid "Configure Local Area Network..."
msgstr "Configura rete locale (LAN)"

#: ../../standalone/drakconnect:1
#, c-format
msgid "State"
msgstr "Stato"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Driver"
msgstr "Driver"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Protocol"
msgstr "Protocollo"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Interface"
msgstr "Interfaccia"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Configure Internet Access..."
msgstr "Configura l'accesso ad Internet"

#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
msgid "Wait please"
msgstr "Attendere per favore"

#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"Name of the profile to create (the new profile is created as a copy of the "
"current one) :"
msgstr ""
"Nome del profilo da creare (il nuovo profilo verrà creato come copia di "
"quello attuale):"

#: ../../standalone/drakconnect:1
#, c-format
msgid "New profile..."
msgstr "Nuovo profilo..."

#: ../../standalone/drakconnect:1
#, c-format
msgid "Profile to delete:"
msgstr "Profilo da cancellare:"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Del profile..."
msgstr "Cancella profilo..."

#: ../../standalone/drakconnect:1
#, c-format
msgid "Network configuration (%d adapters)"
msgstr "Configurazione della rete (%d adattatori)"

#: ../../standalone/drakedm:1
#, c-format
msgid ""
"X11 Display Manager allows you to graphically log\n"
"into your system with the X Window System running and supports running\n"
"several different X sessions on your local machine at the same time."
msgstr ""

#: ../../standalone/drakedm:1
#, c-format
msgid "Choosing a display manager"
msgstr ""

#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
"Unable to properly close mkbootdisk: \n"
" %s \n"
" %s"
msgstr ""
"Non è stato possibile chiudere normalmente mkbootdisk: \n"
" %s \n"
" %s"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Unable to fork: %s"
msgstr "Impossibile eseguire la chiamata fork: %s"

#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
"There is no medium or it is write-protected for device %s.\n"
"Please insert one."
msgstr ""
"Il dispositivo %s è vuoto o il supporto è protetto in scrittura.\n"
"Per favore inserisci un supporto."

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Be sure a media is present for the device %s"
msgstr "Assicurati che un supporto sia inserito nel dispositivo %s"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Build the disk"
msgstr "Crea il disco"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Output"
msgstr "Output"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Remove a module"
msgstr "Rimuovi un modulo"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Add a module"
msgstr "Aggiungi un modulo"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "omit scsi modules"
msgstr "ometti moduli scsi"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "if needed"
msgstr "se necessario"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "omit raid modules"
msgstr "ometti moduli raid"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "force"
msgstr "forza"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "mkinitrd optional arguments"
msgstr "Argomenti opzionali per mkinitrd"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Expert Area"
msgstr "Area per esperti"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "kernel version"
msgstr "versione del kernel"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "default"
msgstr "predefinito"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "General"
msgstr "Generale"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "boot disk creation"
msgstr "creazione disco di avvio"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "drakfloppy"
msgstr "drakfloppy"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Size"
msgstr "Dimensione"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Module name"
msgstr "Nome modulo"

#: ../../standalone/drakfont:1
#, c-format
msgid "Post Uninstall"
msgstr "Post-disinstallazione"

#: ../../standalone/drakfont:1
#, c-format
msgid "Remove fonts on your system"
msgstr "Rimuovi i font dal tuo sistema"

#: ../../standalone/drakfont:1
#, c-format
msgid "Initial tests"
msgstr "Test iniziali"

#: ../../standalone/drakfont:1
#, c-format
msgid "Post Install"
msgstr "Post-installazione"

#: ../../standalone/drakfont:1
#, c-format
msgid "Install & convert Fonts"
msgstr "Installa e converti i font"

#: ../../standalone/drakfont:1
#, c-format
msgid "Copy fonts on your system"
msgstr "Copia i font sul tuo sistema"

#: ../../standalone/drakfont:1
#, c-format
msgid "Remove List"
msgstr "Rimuovi lista"

#: ../../standalone/drakfont:1
#, c-format
msgid "Selected All"
msgstr "Tutti selezionati"

#: ../../standalone/drakfont:1
#, c-format
msgid "Unselected All"
msgstr "Deseleziona tutto"

#: ../../standalone/drakfont:1
#, c-format
msgid "here if no."
msgstr "qui in caso contrario."

#: ../../standalone/drakfont:1
#, c-format
msgid "click here if you are sure."
msgstr "cliccate qui se ne siete sicuri."

#: ../../standalone/drakfont:1
#, c-format
msgid "Install List"
msgstr "Lista di installazione"

#: ../../standalone/drakfont:1
#, c-format
msgid "Select the font file or directory and click on 'Add'"
msgstr "Selezionate il file o la directory del font e cliccate su \"Aggiungi\""

#: ../../standalone/drakfont:1
#, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"-You can install the fonts the normal way. In rare cases, bogus fonts may "
"hang up your X Server."
msgstr ""
"Prima di installare qualsiasi font accertatevi di avere il permesso di "
"installarli e usarli sul vostro sistema.\n"
"\n"
"-Potete installare i font nel modo normale. In casi piuttosto rari, dei font "
"corrotti potrebbero bloccare il vostro server X."

#: ../../standalone/drakfont:1
#, c-format
msgid "Generic Printers"
msgstr "Stampanti generiche"

#: ../../standalone/drakfont:1
#, c-format
msgid "Abiword"
msgstr "Abiword"

#: ../../standalone/drakfont:1
#, c-format
msgid "StarOffice"
msgstr "StarOffice"

#: ../../standalone/drakfont:1
#, c-format
msgid "Ghostscript"
msgstr "Ghostscript"

#: ../../standalone/drakfont:1
#, c-format
msgid "Choose the applications that will support the fonts:"
msgstr "Scegliete le applicazioni che supporteranno i font:"

#: ../../standalone/drakfont:1
#, c-format
msgid ""
"\n"
" Copyright (C) 2001-2002 by MandrakeSoft \n"
"\tDUPONT Sebastien (original version)\n"
"        CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
"\n"
" This program is free software; you can redistribute it and/or modify\n"
" it under the terms of the GNU General Public License as published by\n"
" the Free Software Foundation; either version 2, or (at your option)\n"
" any later version.\n"
"\n"
" This program is distributed in the hope that it will be useful,\n"
" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
" GNU General Public License for more details.\n"
"\n"
" You should have received a copy of the GNU General Public License\n"
" along with this program; if not, write to the Free Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
" Thanks:\n"
"    -  pfm2afm:   \n"
"\t by Ken Borgendale:\n"
"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
"    -  type1inst:\n"
"\t by James Macnicol: \n"
"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
"    -  ttf2pt1:   \n"
"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
"             Convert ttf font files to afm and pfb fonts\n"
msgstr ""

#: ../../standalone/drakfont:1
#, fuzzy, c-format
msgid "About"
msgstr "Annulla"

#: ../../standalone/drakfont:1
#, c-format
msgid "Font List"
msgstr "Lista font"

#: ../../standalone/drakfont:1
#, c-format
msgid "Advanced Options"
msgstr "Opzioni avanzate"

#: ../../standalone/drakfont:1
#, c-format
msgid "Uninstall Fonts"
msgstr "Disintallazione font"

#: ../../standalone/drakfont:1
#, c-format
msgid "Get Windows Fonts"
msgstr "Prendi i font di Windows"

#: ../../standalone/drakfont:1
#, c-format
msgid "Import Fonts"
msgstr "Importazione font"

#: ../../standalone/drakfont:1
#, c-format
msgid "done"
msgstr "fatto"

#: ../../standalone/drakfont:1
#, c-format
msgid "xfs restart"
msgstr "riavvia xfs"

#: ../../standalone/drakfont:1
#, c-format
msgid "Suppress Fonts Files"
msgstr "Soppressione file dei font"

#: ../../standalone/drakfont:1
#, c-format
msgid "Restart XFS"
msgstr "Riavvia XFS"

#: ../../standalone/drakfont:1
#, c-format
msgid "Suppress Temporary Files"
msgstr "Soppressione file temporanei"

#: ../../standalone/drakfont:1
#, c-format
msgid "type1inst building"
msgstr "sto costruendo type1inst"

#: ../../standalone/drakfont:1
#, c-format
msgid "pfm fonts conversion"
msgstr "conversione font pfm"

#: ../../standalone/drakfont:1
#, c-format
msgid "ttf fonts conversion"
msgstr "conversione font ttf"

#: ../../standalone/drakfont:1
#, c-format
msgid "Ghostscript referencing"
msgstr ""

#: ../../standalone/drakfont:1
#, c-format
msgid "Fonts conversion"
msgstr "Conversione font"

#: ../../standalone/drakfont:1
#, c-format
msgid "True Type install done"
msgstr "Installazione font True Type effettuata"

#: ../../standalone/drakfont:1
#, c-format
msgid "please wait during ttmkfdir..."
msgstr "per favore attendere mentre eseguo ttmkfdir..."

#: ../../standalone/drakfont:1
#, c-format
msgid "True Type fonts installation"
msgstr "Installazione di font True Type"

#: ../../standalone/drakfont:1
#, c-format
msgid "Fonts copy"
msgstr "Copia i font"

#: ../../standalone/drakfont:1
#, c-format
msgid "Search for fonts in installed list"
msgstr "Cerca font nella lista installati"

#: ../../standalone/drakfont:1
#, c-format
msgid "could not find any font.\n"
msgstr "non ho trovato nessun font.\n"

#: ../../standalone/drakfont:1
#, c-format
msgid "Reselect correct fonts"
msgstr "Ri-selezionate i font corretti"

#: ../../standalone/drakfont:1
#, c-format
msgid "could not find any font in your mounted partitions"
msgstr "non ho trovato nessun font nelle partizioni montate"

#: ../../standalone/drakfont:1
#, c-format
msgid "no fonts found"
msgstr "nessun font trovato"

#: ../../standalone/drakfont:1
#, c-format
msgid "parse all fonts"
msgstr "esamina tutti i font"

#: ../../standalone/drakfont:1
#, c-format
msgid "Unselect fonts installed"
msgstr "Deseleziona fonti installate"

#: ../../standalone/drakfont:1
#, c-format
msgid "Search installed fonts"
msgstr "Cerca fonti installate"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Welcome to the Internet Connection Sharing utility!\n"
"\n"
"%s\n"
"\n"
"Click on Configure to launch the setup wizard."
msgstr ""
"Benvenuti nell'utilità di condivisione della connessione ad Internet!\n"
"\n"
"%s\n"
"\n"
"Cliccate su \"Configura\" se volete lanciare il Wizard di configurazione."

#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing configuration"
msgstr "Configurazione della connessione ad Internet"

#: ../../standalone/drakgw:1
#, c-format
msgid "No Internet Connection Sharing has ever been configured."
msgstr ""
"Nessuna condivisione della connessione ad Internet configurata in precedenza."

#: ../../standalone/drakgw:1
#, c-format
msgid "The setup has already been done, and it's currently enabled."
msgstr "Il setup è già stato fatto, ed è attualmente abilitato."

#: ../../standalone/drakgw:1
#, c-format
msgid "The setup has already been done, but it's currently disabled."
msgstr "Il setup è già stato fatto, ma è attualmente disabilitato."

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP)."
msgstr ""
"Ogni cosa è stata configurata.\n"
"Ora puoi condividere la connessione ad Internet con altri computer sulla tua "
"rete locale (LAN) usando la configurazione di rete automatica (DHCP)."

#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid "Problems installing package %s"
msgstr "Problemi nell'installazione del pacchetto %s"

#: ../../standalone/drakgw:1
#, c-format
msgid "Configuring scripts, installing software, starting servers..."
msgstr ""
"Sto configurando gli script, installando il software, avviando i server..."

#: ../../standalone/drakgw:1
#, c-format
msgid "Configuring..."
msgstr "Sto configurando..."

#: ../../standalone/drakgw:1
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr ""
"Trovato conflitto potenziale nell'indirizzo LAN nella configurazione "
"corrente di %s!\n"

#: ../../standalone/drakgw:1
#, c-format
msgid "The Local Network did not finish with `.0', bailing out."
msgstr "La rete locale non terminava con \".0\", rinuncio."

#: ../../standalone/drakgw:1
#, c-format
msgid "Re-configure interface and DHCP server"
msgstr "Riconfigurazione dell'interfaccia di rete e del server DHCP"

#: ../../standalone/drakgw:1
#, c-format
msgid "The maximum lease (in seconds)"
msgstr ""

#: ../../standalone/drakgw:1
#, c-format
msgid "The default lease (in seconds)"
msgstr ""

#: ../../standalone/drakgw:1
#, c-format
msgid "The DHCP end range"
msgstr ""

#: ../../standalone/drakgw:1
#, c-format
msgid "The DHCP start range"
msgstr ""

#: ../../standalone/drakgw:1
#, fuzzy, c-format
msgid "The internal domain name"
msgstr "Nuovo nome della stampante"

#: ../../standalone/drakgw:1
#, fuzzy, c-format
msgid "The DNS Server IP"
msgstr "IP di (questo) server DHCP"

#: ../../standalone/drakgw:1
#, c-format
msgid "(This) DHCP Server IP"
msgstr "IP di (questo) server DHCP"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"DHCP Server Configuration.\n"
"\n"
"Here you can select different options for the DHCP server configuration.\n"
"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
msgstr ""

#: ../../standalone/drakgw:1
#, fuzzy, c-format
msgid "Local Network adress"
msgstr "Rete locale di classe C"

#: ../../standalone/drakgw:1
#, fuzzy, c-format
msgid ""
"I can keep your current configuration and assume you already set up a DHCP "
"server; in that case please verify I correctly read the Network that you use "
"for your local network; I will not reconfigure it and I will not touch your "
"DHCP server configuration.\n"
"\n"
"The default DNS entry is the Caching Nameserver configured on the firewall. "
"You can replace that with your ISP DNS IP, for example.\n"
"\t\t      \n"
"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
"for you.\n"
"\n"
msgstr ""
"Posso conservare la vostra configurazione attuale e supporre che abbiate già "
"impostato un server DHCP; in tal caso, per favore controllate che la rete di "
"classe C che usate per la vostra rete locale sia stata letta correttamente; "
"non la riconfigurerò e non toccherò la configurazione del vostro server "
"DHCP.\n"
"\n"
"In alternativa, posso riconfigurare la vostra interfaccia di rete e (ri)"
"configurare un server DHCP per voi.\n"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Current configuration of `%s':\n"
"\n"
"Network: %s\n"
"IP address: %s\n"
"IP attribution: %s\n"
"Driver: %s"
msgstr ""
"Configurazione attuale di \"%s\":\n"
"\n"
"Rete: %s\n"
"Indirizzo IP: %s\n"
"Attribuzione IP: %s\n"
"Driver: %s"

#: ../../standalone/drakgw:1
#, fuzzy, c-format
msgid "Current interface configuration"
msgstr "Mostra la configurazione dell'interfaccia corrente"

#: ../../standalone/drakgw:1
#, c-format
msgid "Show current interface configuration"
msgstr "Mostra la configurazione dell'interfaccia corrente"

#: ../../standalone/drakgw:1
#, c-format
msgid "No (experts only)"
msgstr ""

#: ../../standalone/drakgw:1
#, c-format
msgid "Automatic reconfiguration"
msgstr "Riconfigurazione automatica"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Warning, the network adapter (%s) is already configured.\n"
"\n"
"Do you want an automatic re-configuration?\n"
"\n"
"You can do it manually but you need to know what you're doing."
msgstr ""
"Attenzione, la scheda di rete (%s) è già configurata.\n"
"\n"
"Desiderate una ri-configurazione automatica?\n"
"\n"
"Potete farlo manualmente se sapete quello che state facendo."

#: ../../standalone/drakgw:1
#, c-format
msgid "Network interface already configured"
msgstr "Interfaccia di rete già configurata"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr ""
"Per favore scegliete quale adattatore di rete sarà connesso alla vostra rete "
"locale (LAN)."

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""
"C'è un solo adattatore di rete configurato nel tuo sistema:\n"
"\n"
"%s\n"
"\n"
"Sto per configurare la tua rete locale (LAN) usando quell'adattatore."

#: ../../standalone/drakgw:1
#, c-format
msgid "Network interface"
msgstr "Interfaccia di rete"

#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr ""
"Nessun adattatore di rete ethernet è stato rilevato nel tuo sistema. Per "
"favore lancia l'utilità di configurazione hardware."

#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid "No network adapter on your system!"
msgstr "Nessun adattatore di rete nel tuo sistema!"

#: ../../standalone/drakgw:1
#, c-format
msgid "Interface %s"
msgstr "Interfaccia %s"

#: ../../standalone/drakgw:1
#, c-format
msgid "Interface %s (using module %s)"
msgstr "Interfaccia %s (usa il modulo %s)"

#: ../../standalone/drakgw:1
#, fuzzy, c-format
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
"this computer's Internet connection.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"Stai per configurare il tuo computer per condividere la sua connessione a "
"Internet.\n"
"Grazie a questa caratteristica, altri computer sulla tua rete locale "
"potranno usare la connessione ad Internet di questa macchina.\n"
"\n"
"Nota: è necessario un Adattatore di Rete dedicato per realizzare una\n"
"Rete di Area Locale (LAN)."

#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing"
msgstr "Condivisione connessione Internet"

#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing is now enabled."
msgstr "La condivisione della connessione ad Internet ora è abilitata."

#: ../../standalone/drakgw:1
#, c-format
msgid "Enabling servers..."
msgstr "Sto attivando i server..."

#: ../../standalone/drakgw:1
#, c-format
msgid "dismiss"
msgstr "abbandona"

#: ../../standalone/drakgw:1
#, c-format
msgid "reconfigure"
msgstr "riconfigura"

#: ../../standalone/drakgw:1
#, c-format
msgid "enable"
msgstr "abilita"

#: ../../standalone/drakgw:1
#, fuzzy, c-format
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Il setup della condivisione della connessione internet è già stato fatto.\n"
"È attualmente disabilitata.\n"
"\n"
"Cosa vorresti fare?"

#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing currently disabled"
msgstr "Condivisione connessione Internet attualmente disabilitata"

#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing is now disabled."
msgstr "La condivisione della connessione ad Internet ora è disabilitata."

#: ../../standalone/drakgw:1
#, c-format
msgid "Disabling servers..."
msgstr "Sto disattivando i server..."

#: ../../standalone/drakgw:1
#, c-format
msgid "disable"
msgstr "disabilita"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"The setup of Internet Connection Sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Il setup della condivisione della connessione Internet è già stato fatto.\n"
"È attualmente abilitata.\n"
"\n"
"Cosa vorresti fare?"

#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing currently enabled"
msgstr "Condivisione della connessione ad Internet attualmente abilitata"

#: ../../standalone/drakgw:1
#, c-format
msgid "Sorry, we support only 2.4 kernels."
msgstr ""

#: ../../standalone/drakhelp:1
#, c-format
msgid ""
"No browser is installed on your system, Please install one if you want to "
"browse the help system"
msgstr ""

#: ../../standalone/drakperm:1
#, c-format
msgid "Path"
msgstr ""

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "group :"
msgstr "Gruppo di lavoro"

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "user :"
msgstr "Utente"

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Path selection"
msgstr "Salva scelta pacchetti"

#: ../../standalone/drakperm:1
#, c-format
msgid "when checked, owner and group won't be changed"
msgstr ""

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Use group id for execution"
msgstr "Usa il riconoscimento automatico"

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Use owner id for execution"
msgstr "Usa il riconoscimento automatico"

#: ../../standalone/drakperm:1
#, c-format
msgid ""
"Used for directory:\n"
" only owner of directory or file in this directory can delete it"
msgstr ""

#: ../../standalone/drakperm:1
#, c-format
msgid "Set-GID"
msgstr ""

#: ../../standalone/drakperm:1
#, c-format
msgid "Set-UID"
msgstr ""

#: ../../standalone/drakperm:1
#, c-format
msgid "sticky-bit"
msgstr ""

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Property"
msgstr "Porta"

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Permissions"
msgstr "Versione: %s\n"

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Current user"
msgstr "Accetta utente"

#: ../../standalone/drakperm:1
#, c-format
msgid "browse"
msgstr ""

#: ../../standalone/drakperm:1
#, c-format
msgid "Edit current rule"
msgstr ""

#: ../../standalone/drakperm:1
#, c-format
msgid "edit"
msgstr ""

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Delete selected rule"
msgstr "Rimuovi quelli selezionati"

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "delete"
msgstr "Cancella"

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Add a new rule at the end"
msgstr "Aggiungi nuova stampante"

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "add a rule"
msgstr "Aggiungi un modulo"

#: ../../standalone/drakperm:1
#, c-format
msgid "Move selected rule down one level"
msgstr ""

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Down"
msgstr "Fatto"

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Move selected rule up one level"
msgstr "Deseleziona tutto"

#: ../../standalone/drakperm:1
#, c-format
msgid "Up"
msgstr ""

#: ../../standalone/drakperm:1
#, c-format
msgid "select perm file to see/edit"
msgstr ""

#: ../../standalone/drakperm:1
#, c-format
msgid ""
"Drakperm is used to see files to use in order to fix permissions, owners, "
"and groups via msec.\n"
"You can also edit your own rules which will owerwrite the default rules."
msgstr ""

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "permissions"
msgstr "partizione %s"

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "group"
msgstr "Gruppo di lavoro"

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "user"
msgstr "Utente"

#: ../../standalone/drakperm:1
#, c-format
msgid "path"
msgstr ""

#: ../../standalone/drakpxe:1
#, fuzzy, c-format
msgid "Location of auto_install.cfg file"
msgstr "Sto creando il floppy di installazione automatica"

#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"Please indicate where the auto_install.cfg file is located.\n"
"\n"
"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
msgstr ""

#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""

#: ../../standalone/drakpxe:1
#, fuzzy, c-format
msgid "No image found"
msgstr "Non ho trovato nessuna stampante locale!\n"

#: ../../standalone/drakpxe:1
#, fuzzy, c-format
msgid "Installation image directory"
msgstr "Xpmac (installazione driver video)"

#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"Please indicate where the installation image will be available.\n"
"\n"
"If you do not have an existing directory, please copy the CD or DVD "
"contents.\n"
"\n"
msgstr ""

#: ../../standalone/drakpxe:1
#, c-format
msgid "The DHCP end ip"
msgstr ""

#: ../../standalone/drakpxe:1
#, c-format
msgid "The DHCP start ip"
msgstr ""

#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"The DHCP server will allow other computer to boot using PXE in the given "
"range of address.\n"
"\n"
"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""

#: ../../standalone/drakpxe:1
#, fuzzy, c-format
msgid "Interface %s (on network %s)"
msgstr "Interfaccia %s (usa il modulo %s)"

#: ../../standalone/drakpxe:1
#, fuzzy, c-format
msgid "Please choose which network interface will be used for the dhcp server."
msgstr ""
"Per favore scegli quale adattatore di rete vuoi usare per connetterti a "
"Internet"

#: ../../standalone/drakpxe:1
#, fuzzy, c-format
msgid ""
"You are about to configure your computer to install a PXE server as a DHCP "
"server\n"
"and a TFTP server to build an installation server.\n"
"With that feature, other computers on your local network will be installable "
"using from this computer.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"Stai per configurare il tuo computer per condividere la sua connessione a "
"Internet.\n"
"Grazie a questa caratteristica, altri computer sulla tua rete locale "
"potranno usare la connessione ad Internet di questa macchina.\n"
"\n"
"Nota: è necessario un Adattatore di Rete dedicato per realizzare una\n"
"Rete di Area Locale (LAN)."

#: ../../standalone/drakpxe:1
#, fuzzy, c-format
msgid "Installation Server Configuration"
msgstr "Configurazione avanzata"

#: ../../standalone/drakpxe:1
#, fuzzy, c-format
msgid "PXE Server Configuration"
msgstr "Configurazione avanzata"

#: ../../standalone/draksec:1
#, fuzzy, c-format
msgid "Please wait, setting security options..."
msgstr "Per favore attendi, sto preparando l'installazione"

#: ../../standalone/draksec:1
#, fuzzy, c-format
msgid "Please wait, setting security level..."
msgstr "Scegli livello di sicurezza desiderato"

#: ../../standalone/draksec:1
#, c-format
msgid "Periodic Checks"
msgstr ""

#: ../../standalone/draksec:1
#, fuzzy, c-format
msgid "System Options"
msgstr "Altre opzioni"

#: ../../standalone/draksec:1
#, fuzzy, c-format
msgid "Network Options"
msgstr "Altre opzioni"

#: ../../standalone/draksec:1
#, c-format
msgid ""
"The following options can be set to customize your\n"
"system security. If you need an explanation, look at the help tooltip.\n"
msgstr ""

#: ../../standalone/draksec:1
#, fuzzy, c-format
msgid "Security Administrator:"
msgstr "Amministratore per la sicurezza (login o email)"

#: ../../standalone/draksec:1
#, fuzzy, c-format
msgid "Security Alerts:"
msgstr "Livello di sicurezza"

#: ../../standalone/draksec:1
#, fuzzy, c-format
msgid "Security Level:"
msgstr "Livello di sicurezza"

#: ../../standalone/draksec:1
#, fuzzy, c-format
msgid "(default value: %s)"
msgstr " (Predefinito)"

#: ../../standalone/draksec:1
#, c-format
msgid ""
"Standard: This is the standard security recommended for a computer that will "
"be used to connect\n"
"               to the Internet as a client.\n"
"\n"
"High:       There are already some restrictions, and more automatic checks "
"are run every night.\n"
"\n"
"Higher:    The security is now high enough to use the system as a server "
"which can accept\n"
"              connections from many clients. If your machine is only a "
"client on the Internet, you\n"
"           should choose a lower level.\n"
"\n"
"Paranoid:  This is similar to the previous level, but the system is entirely "
"closed and security\n"
"                features are at their maximum\n"
"\n"
"Security Administrator:\n"
"               If the 'Security Alerts' option is set, security alerts will "
"be sent to this user (username or\n"
"            email)"
msgstr ""

#: ../../standalone/draksound:1
#, c-format
msgid ""
"\n"
"\n"
"\n"
"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
"program.  Just type \"sndconfig\" in a console."
msgstr ""

#: ../../standalone/draksound:1
#, c-format
msgid ""
"No Sound Card has been detected on your machine. Please verify that a Linux-"
"supported Sound Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""

#: ../../standalone/draksound:1
#, fuzzy, c-format
msgid "No Sound Card detected!"
msgstr "Nessuna NIC selezionata!"

#: ../../standalone/draksplash:1
#, c-format
msgid "%s BootSplash (%s) preview"
msgstr ""

#: ../../standalone/draksplash:1
#, fuzzy, c-format
msgid "Generating preview ..."
msgstr "Riconoscimento periferiche ..."

#: ../../standalone/draksplash:1
#, fuzzy, c-format
msgid "You must choose an image file first!"
msgstr "Dovete scegliere/indicare una stampante/un dispositivo!"

#: ../../standalone/draksplash:1
#, fuzzy, c-format
msgid "ProgressBar color selection"
msgstr "Scelta del modello della stampante"

#: ../../standalone/draksplash:1
#, c-format
msgid "This theme does not yet have a bootsplash in %s !"
msgstr ""

#: ../../standalone/draksplash:1
#, c-format
msgid "saving Bootsplash theme..."
msgstr ""

#: ../../standalone/draksplash:1
#, fuzzy, c-format
msgid "choose image file"
msgstr "Scegli un file"

#: ../../standalone/draksplash:1
#, c-format
msgid "Configure bootsplash picture"
msgstr "Scelta dell'immagine di bootsplash "

#: ../../standalone/draksplash:1
#, c-format
msgid "Make kernel message quiet by default"
msgstr ""

#: ../../standalone/draksplash:1
#, c-format
msgid "Display logo on Console"
msgstr ""

#: ../../standalone/draksplash:1
#, fuzzy, c-format
msgid "Choose color"
msgstr "Scegli un monitor"

#: ../../standalone/draksplash:1
#, fuzzy, c-format
msgid "Save theme"
msgstr "Installa sistema"

#: ../../standalone/draksplash:1
#, fuzzy, c-format
msgid "Preview"
msgstr "dispositivo"

#: ../../standalone/draksplash:1
#, c-format
msgid "the color of the progress bar"
msgstr ""

#: ../../standalone/draksplash:1
#, c-format
msgid "the height of the progress bar"
msgstr ""

#: ../../standalone/draksplash:1
#, c-format
msgid "the width of the progress bar"
msgstr ""

#: ../../standalone/draksplash:1
#, c-format
msgid ""
"the progress bar y coordinate\n"
"of its upper left corner"
msgstr ""

#: ../../standalone/draksplash:1
#, c-format
msgid ""
"the progress bar x coordinate\n"
"of its upper left corner"
msgstr ""

#: ../../standalone/draksplash:1
#, c-format
msgid "text box height"
msgstr ""

#: ../../standalone/draksplash:1
#, c-format
msgid "text width"
msgstr ""

#: ../../standalone/draksplash:1
#, c-format
msgid ""
"y coordinate of text box\n"
"in number of characters"
msgstr ""

#: ../../standalone/draksplash:1
#, c-format
msgid ""
"x coordinate of text box\n"
"in number of characters"
msgstr ""

#: ../../standalone/draksplash:1
#, c-format
msgid "Browse"
msgstr ""

#: ../../standalone/draksplash:1
#, fuzzy, c-format
msgid "Theme name"
msgstr "Nome di condivisione"

#: ../../standalone/draksplash:1
#, fuzzy, c-format
msgid "final resolution"
msgstr "Risoluzione"

#: ../../standalone/draksplash:1
#, fuzzy, c-format
msgid "first step creation"
msgstr "creazione disco di avvio"

#: ../../standalone/draksplash:1
#, c-format
msgid ""
"package 'ImageMagick' is required to be able to complete configuration.\n"
"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""

#: ../../standalone/drakxtv:1
#, c-format
msgid ""
"No TV Card has been detected on your machine. Please verify that a Linux-"
"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""

#: ../../standalone/drakxtv:1
#, c-format
msgid "No TV Card detected!"
msgstr ""

#: ../../standalone/drakxtv:1
#, c-format
msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr ""

#: ../../standalone/drakxtv:1
#, c-format
msgid "Have a nice day!"
msgstr ""

#: ../../standalone/drakxtv:1
#, c-format
msgid "XawTV isn't installed!"
msgstr ""

#: ../../standalone/drakxtv:1
#, c-format
msgid "There was an error while scanning for TV channels"
msgstr "Si è verificato un errore nella ricerca dei canali TV"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Scanning for TV channels"
msgstr "Sto cercando canali TV"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Scanning for TV channels in progress ..."
msgstr "Ricerca di canali TV in corso ..."

#: ../../standalone/drakxtv:1
#, c-format
msgid "Area:"
msgstr "Area:"

#: ../../standalone/drakxtv:1
#, c-format
msgid "TV norm:"
msgstr "Standard TV:"

#: ../../standalone/drakxtv:1
#, c-format
msgid ""
"Please,\n"
"type in your tv norm and country"
msgstr "Per favore, digitate il vostro standard TV e la nazione"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Australian Optus cable TV"
msgstr ""

#: ../../standalone/drakxtv:1
#, c-format
msgid "Newzealand"
msgstr "Nuova Zelanda"

#: ../../standalone/drakxtv:1
#, c-format
msgid "France [SECAM]"
msgstr "Francia [SECAM]"

#: ../../standalone/drakxtv:1
#, c-format
msgid "East Europe"
msgstr "Europa Orientale"

#: ../../standalone/drakxtv:1
#, c-format
msgid "West Europe"
msgstr "Europa occidentale"

#: ../../standalone/drakxtv:1
#, c-format
msgid "China (broadcast)"
msgstr "China (broadcast)"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Japan (cable)"
msgstr "Giappone (cavo)"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Japan (broadcast)"
msgstr "Giappone (broadcast)"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Canada (cable)"
msgstr "Canada (cavo)"

#: ../../standalone/drakxtv:1
#, c-format
msgid "USA (cable-hrc)"
msgstr "USA (cavo-hrc)"

#: ../../standalone/drakxtv:1
#, c-format
msgid "USA (cable)"
msgstr "USA (cavo)"

#: ../../standalone/drakxtv:1
#, c-format
msgid "USA (broadcast)"
msgstr "USA (broadcast)"

#: ../../standalone/drakxtv:1
#, c-format
msgid ""
"XawTV isn't installed!\n"
"\n"
"\n"
"If you do have a TV card but DrakX has neither detected it (no bttv nor "
"saa7134\n"
"module in \"/etc/modules\") nor installed xawtv, please send the\n"
"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
"with subject \"undetected TV card\".\n"
"\n"
"\n"
"You can install it by typing \"urpmi xawtv\" as root, in a console."
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "primary"
msgstr "primario"

#: ../../standalone/harddrake2:1
#, c-format
msgid "secondary"
msgstr "secondario"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Click on a device in the left tree in order to display its information here."
msgstr ""

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "Unknown"
msgstr "Modello sconosciuto"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "unknown"
msgstr "Modello sconosciuto"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Running \"%s\" ..."
msgstr "Sto eseguendo \"%s\" ..."

#: ../../standalone/harddrake2:1
#, c-format
msgid "Run config tool"
msgstr "Lancia il tool di configurazione"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Configure module"
msgstr "Configura modulo"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Information"
msgstr "Informazioni"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Detected hardware"
msgstr "Hardware identificato"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Harddrake2 version "
msgstr "Versione di Harddrake2 "

#: ../../standalone/harddrake2:1
#, c-format
msgid "Detection in progress"
msgstr "Identificazione in corso"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Author:"
msgstr "Autore:"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
"Version:"
msgstr ""
"Questo è harddrake, uno strumento Mandrake per configurare l'hardware.\n"
"Versione:"

#: ../../standalone/harddrake2:1
#, c-format
msgid "About Harddrake"
msgstr "Informazioni su harddrake"

#: ../../standalone/harddrake2:1
#, c-format
msgid "/_About..."
msgstr "/_Informazioni su..."

#: ../../standalone/harddrake2:1
#, c-format
msgid "/_Report Bug"
msgstr "/_Segnalazione bug"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Once you've selected a device, you'll be able to see the device information "
"in fields displayed on the right frame (\"Information\")"
msgstr ""

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "Select a device !"
msgstr "Scegliete uno scanner"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Description of the fields:\n"
"\n"
msgstr ""
"Descrizione dei campi:\n"
"\n"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Harddrake help"
msgstr "Guida di harddrake"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "/_Fields description"
msgstr "Descrizione"

#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
msgid "/_Help"
msgstr "/_Guida"

#: ../../standalone/harddrake2:1
#, c-format
msgid "/_Quit"
msgstr "/_Esci"

#: ../../standalone/harddrake2:1
#, c-format
msgid "/Autodetect _jazz drives"
msgstr ""

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "/Autodetect _modems"
msgstr "Usa il riconoscimento automatico"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "/Autodetect _printers"
msgstr "Usa il riconoscimento automatico"

#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
msgid "/_Options"
msgstr "/_Opzioni"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the vendor name of the processor"
msgstr "marca del processore"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the vendor name of the device"
msgstr "marca del dispositivo"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "The type of bus on which the mouse is connected"
msgstr "Per favore indica a che porta seriale è connesso il mouse."

#: ../../standalone/harddrake2:1
#, c-format
msgid "Stepping of the cpu (sub model (generation) number)"
msgstr ""

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "Model stepping"
msgstr "carica configurazione"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the number of the processor"
msgstr "il numero del processore"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Processor ID"
msgstr "ID processore"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "network printer port"
msgstr ", host TCP/IP \"%s\", porta %s"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Name"
msgstr "Nome"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "Number of buttons"
msgstr "Numero di pulsanti"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "Official vendor name of the cpu"
msgstr "marca del dispositivo"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "Model name"
msgstr "Nome modulo"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "Model"
msgstr "Modello"

#: ../../standalone/harddrake2:1
#, c-format
msgid "hard disk model"
msgstr "modello del disco fisso"

#: ../../standalone/harddrake2:1
#, c-format
msgid "class of hardware device"
msgstr "classe del dispositivo hardware"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "Media class"
msgstr "classe dei media"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Sub generation of the cpu"
msgstr ""

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "Level"
msgstr "livello"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Format of floppies supported by the drive"
msgstr ""

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "Floppy format"
msgstr "Formatta"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Some of the early i486DX-100 chips cannot reliably return to operating mode "
"after the \"halt\" instruction is used"
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "Halt bug"
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "F00f bug"
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "Whether the FPU has an irq vector"
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "Is FPU present"
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Early Intel Pentium chips manufactured have a bug in their floating point "
"processor which did not achieve the required precision when performing a "
"Floating point DIVision (FDIV)"
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "Fdiv bug"
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "CPU flags reported by the kernel"
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "Flags"
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "the module of the GNU/Linux kernel that handles the device"
msgstr "il modulo del kernel GNU/Linux che gestisce questo dispositivo"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Module"
msgstr "Modulo"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "new dynamic device name generated by core kernel devfs"
msgstr "nuovo nome di dispositivo dinamico generato dal devfs del kernel"

#: ../../standalone/harddrake2:1
#, c-format
msgid "New devfs device"
msgstr "Nuovo dispositivo devfs"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "old static device name used in dev package"
msgstr "vecchio none di dispositivo statico usato nel pacchetto dev"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Old device file"
msgstr "vecchio file di dispositivo"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "This field describes the device"
msgstr "in questo campo si descrive il dispositivo"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"The cpu frequency in Mhz (Mega herz which in first approximation may be "
"coarsely assimilated to number of instructions the cpu is able to execute "
"per second)"
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "Frequency (MHz)"
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "Information level that can be obtained through the cpuid instruction"
msgstr ""

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "Cpuid level"
msgstr "Livello di sicurezza"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Family of the cpu (eg: 6 for i686 class)"
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "Cpuid family"
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "Coma bug"
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "Drive capacity"
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "Size of the (second level) cpu cache"
msgstr ""

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "Cache size"
msgstr "dimensione del blocco"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"- pci devices: this gives the PCI slot, device and function of this card\n"
"- eide devices: the device is either a slave or a master device\n"
"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""
"- dispositivi PCI: indica slot PCI, dispositivo e funzione della scheda\n"
"- dispositivi EIDE: indica se il dispositivo è master o slave\n"
"- dispositivi SCSI: indica bus e id del dispositivo SCSI"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Location on the bus"
msgstr "Posizione sul bus"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid ""
"- PCI and USB devices: this lists the vendor, device, subvendor and "
"subdevice PCI/USB ids"
msgstr ""
"- dispositivi PCI e USB : lista degli ID di produttori, dispositivi, "
"rivenditori, e sotto-dispositivi PCI/USB"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Bus identification"
msgstr "Identificazione bus"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"The GNU/Linux kernel needs to run a calculation loop at boot time to "
"initialize a timer counter.  Its result is stored as bogomips as a way to "
"\"benchmark\" the cpu."
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "Bogomips"
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "EIDE/SCSI channel"
msgstr "canale EIDE/SCSI"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Channel"
msgstr "Canale"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
"questo è il bus fisico a cui è collegato il dispositivo (ad es. PCI, "
"USB, ...)"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Bus"
msgstr "Bus"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the list of alternative drivers for this sound card"
msgstr "lista dei driver alternativi per questa scheda audio"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Alternative drivers"
msgstr "Driver alternativi"

#: ../../standalone/keyboarddrake:1
#, c-format
msgid "Do you want the BackSpace to return Delete in console?"
msgstr "Vuoi che il tasto BackSpace funzioni come Canc nella console?"

#: ../../standalone/keyboarddrake:1
#, c-format
msgid "Please, choose your keyboard layout."
msgstr "Per favore, scegliete l'impostazione della tastiera."

#: ../../standalone/livedrake:1
#, c-format
msgid "Unable to start live upgrade !!!\n"
msgstr "Non riesco ad avviare l'aggiornamento diretto !!!\n"

#: ../../standalone/livedrake:1
#, c-format
msgid ""
"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
"Per favore inserisci il Cd-Rom di installazione nel lettore e premi Ok "
"quando\n"
"pronto. Se non ce l'hai, premi Annulla per evitare l'aggiornamento diretto."

#: ../../standalone/livedrake:1
#, c-format
msgid "Change Cd-Rom"
msgstr "Cambia il CD-ROM"

#: ../../standalone/localedrake:1
#, c-format
msgid "The change is done, but to be effective you must logout"
msgstr ""
"Il cambiamento è stato applicato, ma perché diventi effettivo dovete uscire "
"dalla sessione"

#: ../../standalone/logdrake:1
#, c-format
msgid "Save as.."
msgstr "Salva con nome..."

#: ../../standalone/logdrake:1
#, c-format
msgid "Please enter your email address below "
msgstr "Per favore inserisci la tua password"

#: ../../standalone/logdrake:1
#, c-format
msgid "alert configuration"
msgstr "configurazione avvisi"

#: ../../standalone/logdrake:1
#, c-format
msgid "You will receive an alert if the load is higher than this value"
msgstr "Riceverete una notifica se il carico eccede questo valore"

#: ../../standalone/logdrake:1
#, c-format
msgid "load setting"
msgstr "carica configurazione"

#: ../../standalone/logdrake:1
#, fuzzy, c-format
msgid ""
"You will receive an alert if one of the selected services is no longer "
"running"
msgstr ""
"Verrete avvisati se uno dei servizi selezionati non è più in esecuzione"

#: ../../standalone/logdrake:1
#, c-format
msgid "service setting"
msgstr "configurazione servizio"

#: ../../standalone/logdrake:1
#, fuzzy, c-format
msgid "Xinetd Service"
msgstr "Server della stampante"

#: ../../standalone/logdrake:1
#, fuzzy, c-format
msgid "Webmin Service"
msgstr "Servizi"

#: ../../standalone/logdrake:1
#, fuzzy, c-format
msgid "SSH Server"
msgstr "Server NIS"

#: ../../standalone/logdrake:1
#, fuzzy, c-format
msgid "Samba Server"
msgstr "Server NIS"

#: ../../standalone/logdrake:1
#, fuzzy, c-format
msgid "Postfix Mail Server"
msgstr "Server di posta Postfix, server di news Inn"

#: ../../standalone/logdrake:1
#, fuzzy, c-format
msgid "Ftp Server"
msgstr "Server NIS"

#: ../../standalone/logdrake:1
#, fuzzy, c-format
msgid "Domain Name Resolver"
msgstr "Nome dominio"

#: ../../standalone/logdrake:1
#, c-format
msgid "Apache World Wide Web Server"
msgstr ""

#: ../../standalone/logdrake:1
#, fuzzy, c-format
msgid ""
"Welcome to the mail configuration utility.\n"
"\n"
"Here, you'll be able to set up the alert system.\n"
msgstr ""
"Benvenuto nell'utilità di configurazione degli avvisi email/SMS..\n"
"\n"
"Qui potrai configurare il sistema di avvisi.\n"

#: ../../standalone/logdrake:1
#, fuzzy, c-format
msgid "Mail alert configuration"
msgstr "Configurazione di avvisi email/SMS"

#: ../../standalone/logdrake:1
#, fuzzy, c-format
msgid "Mail alert"
msgstr "Notifica Mail/SMS"

#: ../../standalone/logdrake:1
#, c-format
msgid "please wait, parsing file: %s"
msgstr "aspetta, sto analizzando: %s"

#: ../../standalone/logdrake:1
#, c-format
msgid "Content of the file"
msgstr "Contenuto del file"

#: ../../standalone/logdrake:1
#, c-format
msgid "Calendar"
msgstr "calendario"

#: ../../standalone/logdrake:1
#, c-format
msgid "Choose file"
msgstr "Scegliete il file"

#: ../../standalone/logdrake:1
#, c-format
msgid "but not matching"
msgstr "ma non coincidono"

#: ../../standalone/logdrake:1
#, c-format
msgid "matching"
msgstr "coincidono"

#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
msgid "Settings"
msgstr "Impostazioni"

#: ../../standalone/logdrake:1
#, c-format
msgid "A tool to monitor your logs"
msgstr "Un tool per monitorare i tuoi file di Log"

#: ../../standalone/logdrake:1
#, c-format
msgid "search"
msgstr "cerca"

#: ../../standalone/logdrake:1
#, c-format
msgid "Mandrake Tools Explanation"
msgstr "Spiegazioni relative agli strumenti Mandrake"

#: ../../standalone/logdrake:1
#, c-format
msgid "Syslog"
msgstr "Syslog"

#: ../../standalone/logdrake:1
#, c-format
msgid "Messages"
msgstr "Messaggi"

#: ../../standalone/logdrake:1
#, c-format
msgid "User"
msgstr "Utente"

#: ../../standalone/logdrake:1
#, c-format
msgid "/Help/_About..."
msgstr "/Guida/_Informazioni su..."

#: ../../standalone/logdrake:1
#, c-format
msgid "/Options/Test"
msgstr "/Opzioni/Prova"

#: ../../standalone/logdrake:1
#, c-format
msgid "/File/-"
msgstr "/File/-"

#: ../../standalone/logdrake:1
#, c-format
msgid "/File/Save _As"
msgstr "/File/Salva_Come"

#: ../../standalone/logdrake:1
#, c-format
msgid "<control>S"
msgstr "<control>S"

#: ../../standalone/logdrake:1
#, c-format
msgid "/File/_Save"
msgstr "/File/_Salva"

#: ../../standalone/logdrake:1
#, c-format
msgid "<control>O"
msgstr "<control>O"

#: ../../standalone/logdrake:1
#, c-format
msgid "/File/_Open"
msgstr "/File/_Apri"

#: ../../standalone/logdrake:1
#, c-format
msgid "<control>N"
msgstr "<control>N"

#: ../../standalone/logdrake:1
#, c-format
msgid "/File/_New"
msgstr "/File/_Nuovo"

#: ../../standalone/logdrake:1
#, c-format
msgid "Show only for the selected day"
msgstr "Mostralo solo per il giorno selezionato"

#: ../../standalone/mousedrake:1
#, c-format
msgid "Emulate third button?"
msgstr "Emula il terzo pulsante?"

#: ../../standalone/mousedrake:1
#, c-format
msgid "Please choose your mouse type."
msgstr "Per favore, scegliete il tipo del vostro mouse."

#: ../../standalone/net_monitor:1
#, fuzzy, c-format
msgid "Connect %s"
msgstr "Connetti"

#: ../../standalone/net_monitor:1
#, fuzzy, c-format
msgid "Disconnect %s"
msgstr "Disconnetti"

#: ../../standalone/net_monitor:1
#, fuzzy, c-format
msgid ""
"Warning, another internet connection has been detected, maybe using your "
"network"
msgstr ""
"Attenzione, è stata individuata un'altra connessione ad Internet, forse "
"attraverso la vostra rete locale"

#: ../../standalone/net_monitor:1
#, c-format
msgid "received"
msgstr ""

#: ../../standalone/net_monitor:1
#, c-format
msgid "transmitted"
msgstr ""

#: ../../standalone/net_monitor:1
#, c-format
msgid "received: "
msgstr ""

#: ../../standalone/net_monitor:1
#, c-format
msgid "sent: "
msgstr ""

#: ../../standalone/net_monitor:1
#, fuzzy, c-format
msgid "Local measure"
msgstr "File locali"

#: ../../standalone/net_monitor:1
#, c-format
msgid "average"
msgstr ""

#: ../../standalone/net_monitor:1
#, fuzzy, c-format
msgid "Color configuration"
msgstr "configurazione avvisi"

#: ../../standalone/net_monitor:1
#, c-format
msgid ""
"Connection failed.\n"
"Verify your configuration in the Mandrake Control Center."
msgstr ""

#: ../../standalone/net_monitor:1
#, fuzzy, c-format
msgid "Connection complete."
msgstr "Velocità della connessione"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Disconnection from the Internet complete."
msgstr ""

#: ../../standalone/net_monitor:1
#, c-format
msgid "Disconnection from the Internet failed."
msgstr ""

#: ../../standalone/net_monitor:1
#, fuzzy, c-format
msgid "Connecting to the Internet "
msgstr "Connetti ad Internet"

#: ../../standalone/net_monitor:1
#, fuzzy, c-format
msgid "Disconnecting from the Internet "
msgstr "Connetti ad Internet"

#: ../../standalone/net_monitor:1
#, fuzzy, c-format
msgid "Wait please, testing your connection..."
msgstr "Sto provando la tua connessione ..."

#: ../../standalone/net_monitor:1
#, c-format
msgid "Logs"
msgstr ""

#: ../../standalone/net_monitor:1
#, fuzzy, c-format
msgid "Connection Time: "
msgstr "Tipo di connessione: "

#: ../../standalone/net_monitor:1
#, c-format
msgid "Receiving Speed:"
msgstr ""

#: ../../standalone/net_monitor:1
#, fuzzy, c-format
msgid "Sending Speed:"
msgstr "Sto inviando i file ..."

#: ../../standalone/net_monitor:1
#, c-format
msgid "Statistics"
msgstr ""

#: ../../standalone/net_monitor:1
#, fuzzy, c-format
msgid "Profile "
msgstr "Profilo: "

#: ../../standalone/net_monitor:1
#, fuzzy, c-format
msgid "Network Monitoring"
msgstr "Configurazione della rete"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Reading data of installed printers..."
msgstr "Stampante locale"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Name/IP address of host:"
msgstr ""

#: ../../standalone/scannerdrake:1
#, c-format
msgid "This host is already in the list, it cannot be added again.\n"
msgstr ""

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "Scannerdrake"
msgstr "Scegliete uno scanner"

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "You must enter a host name or an IP address.\n"
msgstr "Per favore inserisci il nome dell'host o l'IP"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Choose the host on which the local scanners should be made available:"
msgstr ""

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "Sharing of local scanners"
msgstr "Stampante locale"

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "This machine"
msgstr "(su questa macchina)"

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "Remove selected host"
msgstr "Rimuovi quelli selezionati"

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "Edit selected host"
msgstr "rilevato %s"

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "Add host"
msgstr "Aggiungere un utente"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "These are the machines from which the scanners should be used:"
msgstr ""

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "Usage of remote scanners"
msgstr "Usa lo spazio libero"

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "All remote machines"
msgstr "(su questa macchina)"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"These are the machines on which the locally connected scanner(s) should be "
"available:"
msgstr ""

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Use the scanners on hosts: "
msgstr ""

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Use scanners on remote computers"
msgstr ""

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "Scanner sharing to hosts: "
msgstr "Stampa"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "The scanners on this machine are available to other computers"
msgstr ""

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"You can also decide here whether scanners on remote machines should be made "
"available on this machine."
msgstr ""

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"Here you can choose whether the scanners connected to this machine should be "
"accessable by remote machines and by which remote machines."
msgstr ""

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Re-generating list of configured scanners ..."
msgstr ""

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "Searching for new scanners ..."
msgstr "Stampante locale"

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "Searching for configured scanners ..."
msgstr "Stampante locale"

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "Scanner sharing"
msgstr "Stampa"

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "Add a scanner manually"
msgstr "Seleziona l'utente manualmente"

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "Search for new scanners"
msgstr "Stampante locale"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "There are no scanners found which are available on your system.\n"
msgstr ""

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid ""
"The following scanner\n"
"\n"
"%s\n"
"is available on your system.\n"
msgstr "Copia i font sul tuo sistema"

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid ""
"The following scanners\n"
"\n"
"%s\n"
"are available on your system.\n"
msgstr "Copia i font sul tuo sistema"

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid ""
"Your %s has been configured.\n"
"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
"applications menu."
msgstr ""
"Lo scanner %s è stato configurato.\n"
"Adesso potete utilizzarlo usando \"XSane\" (sezione Multimedia/Graphics del "
"menu di sistema)."

#: ../../standalone/scannerdrake:1
#, c-format
msgid "choose device"
msgstr "seleziona il dispositivo"

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "Please select the device where your %s is attached"
msgstr "Per favore, inserite il nome del dispositivo da usare per il backup"

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "Searching for scanners ..."
msgstr "Stampante locale"

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "Auto-detect available ports"
msgstr "Usa il riconoscimento automatico"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "(Note: Parallel ports cannot be auto-detected)"
msgstr ""

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid ""
"The %s must be configured by printerdrake.\n"
"You can launch printerdrake from the Mandrake Control Center in Hardware "
"section."
msgstr ""
"Questo scanner %s deve essere configurato con printerdrake.\n"
"Potete lanciare printerdrake dal Centro di controllo Mandrake, sezione "
"Hardware."

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "The %s is unsupported"
msgstr "Questo scanner %s non è supportato"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "The %s is not known by this version of Scannerdrake."
msgstr ""

#: ../../standalone/scannerdrake:1
#, c-format
msgid "The %s is not supported by this version of Mandrake Linux."
msgstr ""

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Port: %s"
msgstr "Porta: %s"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ", "
msgstr ", "

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "Detected model: %s"
msgstr "Rilevato %s"

#: ../../standalone/scannerdrake:1
#, c-format
msgid " ("
msgstr " ("

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "Select a scanner model"
msgstr "Scegliete uno scanner"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "%s is not in the scanner database, configure it manually?"
msgstr ""

#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "%s found on %s, configure it automatically?"
msgstr "Trovato %s su %s, devo configurarlo?"

#: ../../standalone/service_harddrake:1
#, fuzzy, c-format
msgid "Hardware probing in progress"
msgstr "Identificazione in corso"

#: ../../standalone/service_harddrake:1
#, c-format
msgid "Some devices were added:\n"
msgstr ""

#: ../../standalone/service_harddrake:1
#, c-format
msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr ""
"Alcuni dispositivi della categoria hardware \"%s\" sono stati rimossi:\n"

#: ../../share/compssUsers:999
msgid "Office Workstation"
msgstr "Postazione di lavoro con programmi Office"

#: ../../share/compssUsers:999
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""
"Programmi Office: wordprocessor (kword, abiword), fogli elettronici "
"(kspread, gnumeric), visualizzatori pdf, ecc."

#: ../../share/compssUsers:999
msgid "Workstation"
msgstr "Workstation"

#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Computer predisposto per i giochi"

#: ../../share/compssUsers:999
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr "Programmi di svago: azione, da tavolo, strategia, ecc."

#: ../../share/compssUsers:999
msgid "Multimedia station"
msgstr "Computer multimediale"

#: ../../share/compssUsers:999
msgid "Sound and video playing/editing programs"
msgstr "Programmi di riproduzione/modifica audio e video"

#: ../../share/compssUsers:999
msgid "Internet station"
msgstr "Computer con accesso ad Internet"

#: ../../share/compssUsers:999
msgid ""
"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
"browse the Web"
msgstr ""
"Gruppo di programmi per leggere e inviare posta e news (pine, mutt, tin..) e "
"per navigare il Web"

#: ../../share/compssUsers:999
msgid "Network Computer (client)"
msgstr "Computer connesso alla rete (cliente)"

#: ../../share/compssUsers:999
msgid "Clients for different protocols including ssh"
msgstr "Clienti per vari protocolli, incluso ssh"

#: ../../share/compssUsers:999
msgid "Configuration"
msgstr "Configurazione"

#: ../../share/compssUsers:999
msgid "Tools to ease the configuration of your computer"
msgstr "Strumenti per semplificare la configurazione del computer"

#: ../../share/compssUsers:999
msgid "Scientific Workstation"
msgstr "Workstation scientifica"

#: ../../share/compssUsers:999
msgid "Scientific applications such as gnuplot"
msgstr ""

#: ../../share/compssUsers:999
msgid "Console Tools"
msgstr "Programmi da linea di comando"

#: ../../share/compssUsers:999
msgid "Editors, shells, file tools, terminals"
msgstr "Editor, shell, programmi di utilità riguardo i file, terminali"

#: ../../share/compssUsers:999
msgid "KDE Workstation"
msgstr "Workstation grafica con KDE"

#: ../../share/compssUsers:999
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr ""
"Il K Desktop Environment, l'ambiente grafico di base con una collezione di "
"utilità che lo accompagnano"

#: ../../share/compssUsers:999
msgid "Graphical Environment"
msgstr "Ambiente grafico"

#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Workstation grafica con GNOME"

#: ../../share/compssUsers:999
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr ""
"Un ambiente grafico con un set di applicazioni user-friendly e utilità per "
"il desktop"

#: ../../share/compssUsers:999
msgid "Other Graphical Desktops"
msgstr "Altri desktop grafici"

#: ../../share/compssUsers:999
msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ecc."

#: ../../share/compssUsers:999
msgid "Development"
msgstr "Sviluppo"

#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "Librerie di sviluppo, programmi e file include per C e C++"

#: ../../share/compssUsers:999
msgid "Documentation"
msgstr "Documentazione"

#: ../../share/compssUsers:999
msgid "Books and Howto's on Linux and Free Software"
msgstr "Libri e Howto su Linux e il software libero"

#: ../../share/compssUsers:999
msgid "LSB"
msgstr ""

#: ../../share/compssUsers:999
msgid "Linux Standard Base. Third party applications support"
msgstr ""

#: ../../share/compssUsers:999
msgid "Web/FTP"
msgstr "Web/FTP"

#: ../../share/compssUsers:999
msgid "Apache, Pro-ftpd"
msgstr "Apache e Pro-ftpd"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Mail"
msgstr "Mali"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Postfix mail server"
msgstr "Server di posta Postfix, server di news Inn"

#: ../../share/compssUsers:999
msgid "Database"
msgstr "Database"

#: ../../share/compssUsers:999
msgid "PostgreSQL or MySQL database server"
msgstr "Server di database PostgreSQL o MySQL"

#: ../../share/compssUsers:999
msgid "Firewall/Router"
msgstr "Firewall/Router"

#: ../../share/compssUsers:999
msgid "Internet gateway"
msgstr "Gateway per Internet"

#: ../../share/compssUsers:999
msgid "DNS/NIS "
msgstr "DNS/NIS"

#: ../../share/compssUsers:999
msgid "Domain Name and Network Information Server"
msgstr "Server di nomi di dominio (DNS) e informazioni sulla rete"

#: ../../share/compssUsers:999
msgid "Network Computer server"
msgstr "Server di rete"

#: ../../share/compssUsers:999
msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "Server NFS, server SMB, server proxy, server SSH"

#: ../../share/compssUsers:999
msgid "Office"
msgstr "Office"

#: ../../share/compssUsers:999
msgid "Set of tools for mail, news, web, file transfer, and chat"
msgstr "Set di utilità per posta, news, web, file transfer, e chat"

#: ../../share/compssUsers:999
msgid "Multimedia - Graphics"
msgstr "Multimedia - Grafica"

#: ../../share/compssUsers:999
msgid "Graphics programs such as The Gimp"
msgstr "Programmi grafici come The Gimp"

#: ../../share/compssUsers:999
msgid "Multimedia - Sound"
msgstr "Multimedia - Suono"

#: ../../share/compssUsers:999
msgid "Audio-related tools: mp3 or midi players, mixers, etc"
msgstr "Utilità audio: riproduttori mp3 o midi, mixer, ecc."

#: ../../share/compssUsers:999
msgid "Multimedia - Video"
msgstr "Multimedia - Video"

#: ../../share/compssUsers:999
msgid "Video players and editors"
msgstr "Riproduttori video e programmi di editing"

#: ../../share/compssUsers:999
msgid "Multimedia - CD Burning"
msgstr "Multimedia - Masterizzazione CD"

#: ../../share/compssUsers:999
msgid "Tools to create and burn CD's"
msgstr "Utilità per creare e masterizzare CD"

#: ../../share/compssUsers:999
msgid "More Graphical Desktops (Gnome, IceWM)"
msgstr "Altri desktop grafici (Gnome, IceWM)"

#: ../../share/compssUsers:999
msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, ecc."

#: ../../share/compssUsers:999
msgid "Personal Information Management"
msgstr "Gestione di informazioni personali"

#: ../../share/compssUsers:999
msgid "Tools for your Palm Pilot or your Visor"
msgstr "Utilità per il tuo Palm Pilot o Visor"

#: ../../share/compssUsers:999
msgid "Personal Finance"
msgstr "Finanza Personale"

#: ../../share/compssUsers:999
msgid "Programs to manage your finances, such as gnucash"
msgstr "Programmi per gestire le tue finanze, come gnucash"

#~ msgid ""
#~ "Please enter your host name if you know it.\n"
#~ "Some DHCP servers require the hostname to work.\n"
#~ "Your host name should be a fully-qualified host name,\n"
#~ "such as ``mybox.mylab.myco.com''."
#~ msgstr ""
#~ "Per favore inserisci il tuo nome host se lo conosci.\n"
#~ "Alcuni server DHCP richiedono il nome host per funzionare.\n"
#~ "Il tuo nome host dovrebbe essere un nome pienamente qualificato,\n"
#~ "come \"mybox.mylab.myco.com\"."

#~ msgid "DrakFloppy Error: %s"
#~ msgstr "Errore DrakFloppy: %s"

#~ msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
#~ msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"

#~ msgid "Launch Aurora at boot time"
#~ msgstr "Lancia Aurora al momento del boot"

#~ msgid "Traditional Gtk+ Monitor"
#~ msgstr "Monitor Gtk+ tradizionale"

#~ msgid "Traditional Monitor"
#~ msgstr "Monitor tradizionale"

#~ msgid "NewStyle Monitor"
#~ msgstr "Monitor NewStyle"

#~ msgid "NewStyle Categorizing Monitor"
#~ msgstr "Monitor NewStyle con categorie"

#~ msgid "Secure Connection"
#~ msgstr "Connessione sicura"

#~ msgid "FTP Connection"
#~ msgstr "Connessione FTP"

#~ msgid "Mail/Groupware/News"
#~ msgstr "Posta/Groupware/Newsgroup"

#~ msgid "Postfix mail server, Inn news server"
#~ msgstr "Server di posta Postfix, server di news Inn"

#~ msgid "/Options"
#~ msgstr "/Opzioni"

#~ msgid ""
#~ "The partition you've selected to add as root (/) is physically located "
#~ "beyond\n"
#~ "the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
#~ "If you plan to use the LILO boot manager, be careful to add a /boot "
#~ "partition"
#~ msgstr ""
#~ "Si è scelto di aggiungere come root (/) una partizione che si trova\n"
#~ "fisicamente oltre il 1024esimo cilindro del disco fisso, e non c'è una\n"
#~ "partizione /boot. Se si ha intenzione di usare LILO come boot manager, "
#~ "occorre assicurarsi che venga creata una partizione /boot"

#~ msgid ""
#~ "Sorry I won't accept to create /boot so far onto the drive (on a cylinder "
#~ "> 1024).\n"
#~ "Either you use LILO and it won't work, or you don't use LILO and you "
#~ "don't need /boot"
#~ msgstr ""
#~ "Spiacente ma non accetterò di creare /boot così avanti sul drive (su un "
#~ "cilindro > 1024).\n"
#~ "Se si usasse LILO non funzionerebbe, mentre, se non si usasse LILO, non "
#~ "servirebbe /boot"

#~ msgid "Upgrade"
#~ msgstr "Aggiornamento"

#~ msgid "Do you want to configure another printer?"
#~ msgstr "Volete configurare un'altra stampante?"

#~ msgid "Know how to use this printer"
#~ msgstr "Sapere come usare questa stampante"

#~ msgid "Reading printer data ..."
#~ msgstr "Sto leggendo i dati della stampante..."

#~ msgid "Detecting devices ..."
#~ msgstr "Riconoscimento periferiche ..."

#~ msgid "Test ports"
#~ msgstr "Test delle porte"