# Translation file of Mandrake graphic install
# Copyright (C) 1999 Mandrakesoft
# Kim Enkovaara <kim.enkovaara@iki.fi>, 1999
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX VERSION\n"
"POT-Creation-Date: 2000-11-11 21:39+0100\n"
"PO-Revision-Date: 2000-05-06 12:42GMT+0200\n"
"Last-Translator: Kim Enkovaara <kim.enkovaara@iki.fi>\n"
"Language-Team: Finnish <fi@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=ISO 8859-15\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.5(devel)\n"

#: ../../Xconfigurator.pm_.c:179
msgid "Graphic card"
msgstr "N�yt�nohjain"

#: ../../Xconfigurator.pm_.c:179
msgid "Select a graphic card"
msgstr "Valitse n�yt�nohjain"

#: ../../Xconfigurator.pm_.c:180
msgid "Choose a X server"
msgstr "Valitse X-palvelin:"

#: ../../Xconfigurator.pm_.c:180
msgid "X server"
msgstr "X-palvelin"

#: ../../Xconfigurator.pm_.c:217 ../../Xconfigurator.pm_.c:223
#, fuzzy, c-format
msgid "XFree %s"
msgstr "XFree86 palvelin: %s"

#: ../../Xconfigurator.pm_.c:220
#, fuzzy
msgid "Which configuration of XFree do you want to have?"
msgstr "Mink�tyyppisen tietueen haluat lis�t�"

#: ../../Xconfigurator.pm_.c:232
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""

#: ../../Xconfigurator.pm_.c:234 ../../Xconfigurator.pm_.c:257
#, c-format
msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr ""

#: ../../Xconfigurator.pm_.c:236 ../../Xconfigurator.pm_.c:259
#, c-format
msgid "XFree %s with 3D hardware acceleration"
msgstr ""

#: ../../Xconfigurator.pm_.c:245
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""

#: ../../Xconfigurator.pm_.c:248
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""

#: ../../Xconfigurator.pm_.c:250
#, c-format
msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
msgstr ""

#: ../../Xconfigurator.pm_.c:265
#, fuzzy
msgid "XFree configuration"
msgstr "Asennuksen j�lkeiset toiminnot"

#: ../../Xconfigurator.pm_.c:303
msgid "Select the memory size of your graphic card"
msgstr "Valitse n�yt�nohjaimen muistim��r�"

#: ../../Xconfigurator.pm_.c:347
msgid "Choose options for server"
msgstr "Valitse optioita palvelimelle"

#: ../../Xconfigurator.pm_.c:358
msgid "Choose a monitor"
msgstr "Valitse monitori"

#: ../../Xconfigurator.pm_.c:358
msgid "Monitor"
msgstr "N�ytt�"

#: ../../Xconfigurator.pm_.c:361
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"Sinun tulee valita vaakavirkistystaajuus n�yt�llesi. Voit joko valita "
"jonkin\n"
"allaolevista alueista, jotka vastaavat teollisuusstandardityyppej� tai "
"sy�tt��\n"
"jonkin muun alueen.\n"
"\n"
"On HYVIN T�RKE��, ett� et valitse n�ytt�tyyppi�, jonka "
"vaakavirkistystaajuus\n"
"on suurempi kuin oman n�ytt�si. Jos ep�r�it, valitse pienempi taajuus."

#: ../../Xconfigurator.pm_.c:368
msgid "Horizontal refresh rate"
msgstr "Vaakavirkistystaajuus"

#: ../../Xconfigurator.pm_.c:368
msgid "Vertical refresh rate"
msgstr "Pystyvirkistystaajuus"

#: ../../Xconfigurator.pm_.c:407
msgid "Monitor not configured"
msgstr "N�ytt�� ei ole asetettu"

#: ../../Xconfigurator.pm_.c:410
msgid "Graphic card not configured yet"
msgstr "N�yt�nohjainta ei ole viel� asetettu"

#: ../../Xconfigurator.pm_.c:413
msgid "Resolutions not chosen yet"
msgstr "N�yt�n resoluutiota ei ole viel� valittu"

#: ../../Xconfigurator.pm_.c:429
msgid "Do you want to test the configuration?"
msgstr "Haluatko kokeilla asetuksia?"

#: ../../Xconfigurator.pm_.c:433
#, fuzzy
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "Varoitus: kokeileminen on vaarallista t�ll� n�yt�nohjaimella"

#: ../../Xconfigurator.pm_.c:436
msgid "Test of the configuration"
msgstr "Kokeile asetuksia"

#: ../../Xconfigurator.pm_.c:475
msgid ""
"\n"
"try to change some parameters"
msgstr ""
"\n"
"kokeile joidenkin parametrien muuttamista"

#: ../../Xconfigurator.pm_.c:475
msgid "An error has occurred:"
msgstr "Tapahtui virhe:"

#: ../../Xconfigurator.pm_.c:497
#, c-format
msgid "Leaving in %d seconds"
msgstr "Lopetan %d sekunnissa"

#: ../../Xconfigurator.pm_.c:507
msgid "Is this the correct setting?"
msgstr "Onko t�m� oikea asetus?"

#: ../../Xconfigurator.pm_.c:515
msgid "An error has occurred, try to change some parameters"
msgstr "Tapahtui virhe, kokeile joidenkin parametrien vaihtamista"

#: ../../Xconfigurator.pm_.c:552 ../../printerdrake.pm_.c:276
msgid "Resolution"
msgstr "Resoluutio"

#: ../../Xconfigurator.pm_.c:587
msgid "Choose the resolution and the color depth"
msgstr "Valitse resoluutio ja v�risyvyys"

#: ../../Xconfigurator.pm_.c:589
#, c-format
msgid "Graphic card: %s"
msgstr "N�yt�nohjain: %s"

#: ../../Xconfigurator.pm_.c:590
#, c-format
msgid "XFree86 server: %s"
msgstr "XFree86 palvelin: %s"

#: ../../Xconfigurator.pm_.c:599
msgid "Show all"
msgstr "N�yt� kaikki"

#: ../../Xconfigurator.pm_.c:623
msgid "Resolutions"
msgstr "Resoluutiot"

#: ../../Xconfigurator.pm_.c:1021
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "N�pp�imist�n j�rjestys: %s\n"

#: ../../Xconfigurator.pm_.c:1022
#, c-format
msgid "Mouse type: %s\n"
msgstr "Hiiren tyyppi: %s\n"

#: ../../Xconfigurator.pm_.c:1023
#, c-format
msgid "Mouse device: %s\n"
msgstr "Hiiren laite: %s\n"

#: ../../Xconfigurator.pm_.c:1024
#, c-format
msgid "Monitor: %s\n"
msgstr "N�ytt�: %s\n"

#: ../../Xconfigurator.pm_.c:1025
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "N�yt�n vaakapoikkeutus: %s\n"

#: ../../Xconfigurator.pm_.c:1026
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "N�yt�n pystypoikkeutus: %s\n"

#: ../../Xconfigurator.pm_.c:1027
#, c-format
msgid "Graphic card: %s\n"
msgstr "N�yt�nohjain: %s\n"

#: ../../Xconfigurator.pm_.c:1028
#, c-format
msgid "Graphic memory: %s kB\n"
msgstr "Grafiikkamuisti: %s kt\n"

#: ../../Xconfigurator.pm_.c:1030
#, fuzzy, c-format
msgid "Color depth: %s\n"
msgstr "V�risyvyysasetukset"

#: ../../Xconfigurator.pm_.c:1031
#, fuzzy, c-format
msgid "Resolution: %s\n"
msgstr "Resoluutiot"

#: ../../Xconfigurator.pm_.c:1033
#, c-format
msgid "XFree86 server: %s\n"
msgstr "XFree86 palvelin: %s\n"

#: ../../Xconfigurator.pm_.c:1034
#, fuzzy, c-format
msgid "XFree86 driver: %s\n"
msgstr "XFree86 palvelin: %s\n"

#: ../../Xconfigurator.pm_.c:1053
msgid "Preparing X-Window configuration"
msgstr "Valmistelen X-Window:n asetuksia"

#: ../../Xconfigurator.pm_.c:1067
msgid "Change Monitor"
msgstr "Vaihda n�ytt��"

#: ../../Xconfigurator.pm_.c:1068
msgid "Change Graphic card"
msgstr "Vaihda n�yt�nohjainta"

#: ../../Xconfigurator.pm_.c:1069
msgid "Change Server options"
msgstr "Vaihda palvelimen optioita"

#: ../../Xconfigurator.pm_.c:1070
msgid "Change Resolution"
msgstr "Vaihda resoluutiota"

#: ../../Xconfigurator.pm_.c:1071
msgid "Show information"
msgstr "N�yt� tiedot"

#: ../../Xconfigurator.pm_.c:1072
msgid "Test again"
msgstr "Kokeile uudelleen"

#: ../../Xconfigurator.pm_.c:1073 ../../standalone/rpmdrake_.c:46
msgid "Quit"
msgstr "Lopeta"

#: ../../Xconfigurator.pm_.c:1077 ../../standalone/drakboot_.c:40
msgid "What do you want to do?"
msgstr "Mit� haluat tehd�?"

#: ../../Xconfigurator.pm_.c:1084
#, fuzzy, c-format
msgid ""
"Keep the changes?\n"
"Current configuration is:\n"
"\n"
"%s"
msgstr "S�ilyt� nykyiset IP-verkon asetukset"

#: ../../Xconfigurator.pm_.c:1105
#, c-format
msgid "Please relog into %s to activate the changes"
msgstr "Kirjaudu uudelleen %s:n aktivoidaksesi muutokset"

#: ../../Xconfigurator.pm_.c:1125
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "Kirjaudu ulos ja k�yt� sitten Ctrl-Alt-BackSpace yhdistelm��"

#: ../../Xconfigurator.pm_.c:1128
msgid "X at startup"
msgstr "X k�ynnistyksess�"

#: ../../Xconfigurator.pm_.c:1129
msgid ""
"I can set up your computer to automatically start X upon booting.\n"
"Would you like X to start when you reboot?"
msgstr ""
"X voidaan laittaa k�ynnistym��n automaattisesti k�ynnistyksen yhteydess�.\n"
"Haluatko k�ynnist�� X:n automaattisesti?"

#: ../../Xconfigurator.pm_.c:1153
msgid "Autologin"
msgstr ""

#: ../../Xconfigurator.pm_.c:1154
#, fuzzy
msgid ""
"I can set up your computer to automatically log on one user.\n"
"If you don't want to use this feature, click on the cancel button."
msgstr ""
"X voidaan laittaa k�ynnistym��n automaattisesti k�ynnistyksen yhteydess�.\n"
"Haluatko k�ynnist�� X:n automaattisesti?"

#: ../../Xconfigurator.pm_.c:1156
#, fuzzy
msgid "Choose the default user:"
msgstr "Valitse uusi koko"

#: ../../Xconfigurator.pm_.c:1157
#, fuzzy
msgid "Choose the window manager to run:"
msgstr "Valitse haluamasi ty�kalu"

#: ../../Xconfigurator_consts.pm_.c:6
msgid "256 colors (8 bits)"
msgstr "256 v�ri� (8 bitti�)"

#: ../../Xconfigurator_consts.pm_.c:7
msgid "32 thousand colors (15 bits)"
msgstr "32 tuhatta v�ri� (15 bitti�)"

#: ../../Xconfigurator_consts.pm_.c:8
msgid "65 thousand colors (16 bits)"
msgstr "65 tuhatta v�ri� (16 bitti�)"

#: ../../Xconfigurator_consts.pm_.c:9
msgid "16 million colors (24 bits)"
msgstr "16 miljoonaa v�ri� (24 bitti�)"

#: ../../Xconfigurator_consts.pm_.c:10
msgid "4 billion colors (32 bits)"
msgstr "4 miljardia v�ri� (32 bitti�)"

#: ../../Xconfigurator_consts.pm_.c:106
msgid "256 kB"
msgstr "256 kt"

#: ../../Xconfigurator_consts.pm_.c:107
msgid "512 kB"
msgstr "512 kt"

#: ../../Xconfigurator_consts.pm_.c:108
msgid "1 MB"
msgstr "1 Mt"

#: ../../Xconfigurator_consts.pm_.c:109
msgid "2 MB"
msgstr "2 Mt"

#: ../../Xconfigurator_consts.pm_.c:110
msgid "4 MB"
msgstr "4 Mt"

#: ../../Xconfigurator_consts.pm_.c:111
msgid "8 MB"
msgstr "8 Mt"

#: ../../Xconfigurator_consts.pm_.c:112
msgid "16 MB or more"
msgstr "16 Mt tai enemm�n"

#: ../../Xconfigurator_consts.pm_.c:117 ../../Xconfigurator_consts.pm_.c:118
msgid "Standard VGA, 640x480 at 60 Hz"
msgstr "Perus-VGA,  640x480 @ 60 Hz"

#: ../../Xconfigurator_consts.pm_.c:119
msgid "Super VGA, 800x600 at 56 Hz"
msgstr "Super VGA, 800x600 @ 56 Hz"

#: ../../Xconfigurator_consts.pm_.c:120
msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
msgstr "8514-yhteensopiva, 1024x768 @ 87 Hz lomitettu (ei 800x600)"

#: ../../Xconfigurator_consts.pm_.c:121
msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
msgstr "Super VGA, 1024x768 @ 87 Hz lomitettu, 800x600 @ 56 Hz"

#: ../../Xconfigurator_consts.pm_.c:122
msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
msgstr "Laajennettu Super VGA, 800x600 @ 60 Hz, 640x480 @ 72 Hz"

#: ../../Xconfigurator_consts.pm_.c:123
msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
msgstr "Lomittamaton SVGA, 1024x768 @ 60 Hz, 800x600 @ 72 Hz"

#: ../../Xconfigurator_consts.pm_.c:124
msgid "High Frequency SVGA, 1024x768 at 70 Hz"
msgstr "Korkeataajuuksinen SVGA, 1024x768 @ 70 Hz"

#: ../../Xconfigurator_consts.pm_.c:125
msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
msgstr "N�ytt�, joka pystyy 1280x1024 @ 60 Hz tilaan"

#: ../../Xconfigurator_consts.pm_.c:126
msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
msgstr "N�ytt�, joka pystyy 1280x1024 @ 74 Hz tilaan"

#: ../../Xconfigurator_consts.pm_.c:127
msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
msgstr "N�ytt�, joka pystyy 1280x1024 @ 76 Hz tilaan"

#: ../../Xconfigurator_consts.pm_.c:128
msgid "Monitor that can do 1600x1200 at 70 Hz"
msgstr "N�ytt�, joka pystyy 1600x1200 @ 70 Hz tilaan"

#: ../../Xconfigurator_consts.pm_.c:129
msgid "Monitor that can do 1600x1200 at 76 Hz"
msgstr "N�ytt�, joka pystyy 1600x1200 @ 76 Hz tilaan"

#: ../../any.pm_.c:91 ../../any.pm_.c:121 ../../any_new.pm_.c:91
#: ../../any_new.pm_.c:121
msgid "First sector of boot partition"
msgstr "Ensimm�inen sektori k�ynnistysosiolla"

#: ../../any.pm_.c:91 ../../any.pm_.c:121 ../../any.pm_.c:150
#: ../../any_new.pm_.c:91 ../../any_new.pm_.c:121 ../../any_new.pm_.c:150
msgid "First sector of drive (MBR)"
msgstr "Ensimm�inen levyn sektori (MBR)"

#: ../../any.pm_.c:95 ../../any_new.pm_.c:95
#, fuzzy
msgid "SILO Installation"
msgstr "LILO/grub asennus"

#: ../../any.pm_.c:96 ../../any.pm_.c:102 ../../any_new.pm_.c:96
#: ../../any_new.pm_.c:102
msgid "Where do you want to install the bootloader?"
msgstr "Minne haluat asentaa k�ytt�j�rjestelm�n lataajan?"

#: ../../any.pm_.c:101 ../../any_new.pm_.c:101
msgid "LILO/grub Installation"
msgstr "LILO/grub asennus"

#: ../../any.pm_.c:111 ../../any_new.pm_.c:111
#: ../../install_steps_interactive.pm_.c:736
msgid "None"
msgstr "Ei mik��n"

#: ../../any.pm_.c:111 ../../any_new.pm_.c:111
msgid "Which bootloader(s) do you want to use?"
msgstr "Mit� k�ynnistysohjelmaa haluat k�ytt��?"

#: ../../any.pm_.c:125 ../../any_new.pm_.c:125
#, fuzzy
msgid "Bootloader installation"
msgstr "K�ynnistyslataajan p��asetukset"

#: ../../any.pm_.c:127 ../../any_new.pm_.c:127
msgid "Boot device"
msgstr "K�ynnistyslaite"

#: ../../any.pm_.c:128 ../../any_new.pm_.c:128
msgid "LBA (doesn't work on old BIOSes)"
msgstr "LBA (ei toimi vanhoissa BIOS:ssa)"

#: ../../any.pm_.c:129 ../../any_new.pm_.c:129
msgid "Compact"
msgstr "Tiivis"

#: ../../any.pm_.c:129 ../../any_new.pm_.c:129
msgid "compact"
msgstr "tiivis"

#: ../../any.pm_.c:130 ../../any.pm_.c:199 ../../any_new.pm_.c:130
#: ../../any_new.pm_.c:199
msgid "Video mode"
msgstr "N�ytt�tila"

#: ../../any.pm_.c:132 ../../any_new.pm_.c:132
msgid "Delay before booting default image"
msgstr "Odota ennen oletusk�ynnistyst�"

#: ../../any.pm_.c:134 ../../any_new.pm_.c:134
#: ../../install_steps_interactive.pm_.c:764
#: ../../install_steps_interactive.pm_.c:815 ../../netconnect.pm_.c:560
#: ../../netconnect_new.pm_.c:686 ../../printerdrake.pm_.c:94
#: ../../printerdrake.pm_.c:128 ../../standalone/adduserdrake_.c:42
msgid "Password"
msgstr "Salasana"

#: ../../any.pm_.c:135 ../../any_new.pm_.c:135
#: ../../install_steps_interactive.pm_.c:765
#: ../../install_steps_interactive.pm_.c:816
#: ../../standalone/adduserdrake_.c:43
msgid "Password (again)"
msgstr "Salasana (uudelleen)"

#: ../../any.pm_.c:136 ../../any_new.pm_.c:136
msgid "Restrict command line options"
msgstr "Rajoita komentorivioptioita"

#: ../../any.pm_.c:136 ../../any_new.pm_.c:136
msgid "restrict"
msgstr "rajoita"

#: ../../any.pm_.c:142 ../../any_new.pm_.c:142
msgid "Bootloader main options"
msgstr "K�ynnistyslataajan p��asetukset"

#: ../../any.pm_.c:145 ../../any_new.pm_.c:145
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"Asetus ``Rajoita komentorivioptioita'' ei ole hy�dyllinen ilman salasanaa"

#: ../../any.pm_.c:146 ../../any_new.pm_.c:146
#: ../../install_steps_interactive.pm_.c:774
#: ../../install_steps_interactive.pm_.c:829
#: ../../standalone/adduserdrake_.c:56
msgid "Please try again"
msgstr "Yrit� uudelleen"

#: ../../any.pm_.c:146 ../../any_new.pm_.c:146
#: ../../install_steps_interactive.pm_.c:774
#: ../../install_steps_interactive.pm_.c:829
#: ../../standalone/adduserdrake_.c:56
msgid "The passwords do not match"
msgstr "Salasanat poikkeavat toisistaan"

#: ../../any.pm_.c:157 ../../any_new.pm_.c:157
msgid ""
"Here are the different entries.\n"
"You can add some more or change the existing ones."
msgstr ""
"Eri asetustietueet.\n"
"Voit lis�t� uusia tai muuttaa olemassaolevia."

#: ../../any.pm_.c:165 ../../any_new.pm_.c:165 ../../printerdrake.pm_.c:352
#: ../../standalone/rpmdrake_.c:302
msgid "Add"
msgstr "Lis��"

#: ../../any.pm_.c:165 ../../any_new.pm_.c:165 ../../diskdrake.pm_.c:46
#: ../../install_steps_interactive.pm_.c:809 ../../netconnect.pm_.c:842
#: ../../netconnect_new.pm_.c:984 ../../printerdrake.pm_.c:352
#: ../../standalone/adduserdrake_.c:36
msgid "Done"
msgstr "Valmis"

#: ../../any.pm_.c:174 ../../any_new.pm_.c:174
msgid "Which type of entry do you want to add?"
msgstr "Mink�tyyppisen tietueen haluat lis�t�"

#: ../../any.pm_.c:175 ../../any_new.pm_.c:175
msgid "Linux"
msgstr "Linux"

#: ../../any.pm_.c:175 ../../any_new.pm_.c:175
#, fuzzy
msgid "Other OS (SunOS...)"
msgstr "Muu k�ytt�j�rjestelm�"

#: ../../any.pm_.c:175 ../../any_new.pm_.c:175
msgid "Other OS (windows...)"
msgstr "Muu k�ytt�j�rjestelm�"

#: ../../any.pm_.c:196 ../../any_new.pm_.c:196
msgid "Image"
msgstr "`Kuva'-tiedosto"

#: ../../any.pm_.c:197 ../../any.pm_.c:206 ../../any_new.pm_.c:197
#: ../../any_new.pm_.c:206
msgid "Root"
msgstr "Juuri"

#: ../../any.pm_.c:198 ../../any_new.pm_.c:198
msgid "Append"
msgstr "Liit�"

#: ../../any.pm_.c:200 ../../any_new.pm_.c:200
msgid "Initrd"
msgstr "Initrd"

#: ../../any.pm_.c:201 ../../any_new.pm_.c:201
msgid "Read-write"
msgstr "Luku-kirjoitus"

#: ../../any.pm_.c:208 ../../any_new.pm_.c:208
msgid "Table"
msgstr "Taulukko"

#: ../../any.pm_.c:209 ../../any_new.pm_.c:209
msgid "Unsafe"
msgstr "Turvaton"

#: ../../any.pm_.c:215 ../../any_new.pm_.c:215
msgid "Label"
msgstr "Otsikko"

#: ../../any.pm_.c:217 ../../any_new.pm_.c:217
msgid "Default"
msgstr "Oletus"

#: ../../any.pm_.c:220 ../../any_new.pm_.c:220 ../../install_gtk.pm_.c:82
#: ../../install_steps_interactive.pm_.c:762 ../../interactive.pm_.c:76
#: ../../interactive.pm_.c:86 ../../interactive.pm_.c:250
#: ../../interactive_newt.pm_.c:51 ../../interactive_newt.pm_.c:99
#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:243
#: ../../my_gtk.pm_.c:486 ../../my_gtk.pm_.c:661 ../../printerdrake.pm_.c:444
#: ../../printerdrake.pm_.c:464
msgid "Ok"
msgstr "Ok"

#: ../../any.pm_.c:220 ../../any_new.pm_.c:220
msgid "Remove entry"
msgstr "Poista tietue"

#: ../../any.pm_.c:223 ../../any_new.pm_.c:223
msgid "Empty label not allowed"
msgstr "Tyhj�� otsikkoa ei sallita"

#: ../../any.pm_.c:224 ../../any_new.pm_.c:224
msgid "This label is already used"
msgstr "Otsikko on jo k�yt�ss�"

#: ../../any.pm_.c:500 ../../any_new.pm_.c:492
#, c-format
msgid "Found %s %s interfaces"
msgstr "L�ysin %s %s liit�nt��"

#: ../../any.pm_.c:501 ../../any_new.pm_.c:493
msgid "Do you have another one?"
msgstr "Onko sinulla muita?"

#: ../../any.pm_.c:502 ../../any_new.pm_.c:494
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "Onko koneessa %s liitynt��?"

#: ../../any.pm_.c:504 ../../any_new.pm_.c:496 ../../interactive.pm_.c:81
#: ../../my_gtk.pm_.c:485 ../../netconnect.pm_.c:90 ../../netconnect.pm_.c:470
#: ../../netconnect_new.pm_.c:148 ../../netconnect_new.pm_.c:509
#: ../../printerdrake.pm_.c:233
msgid "No"
msgstr "Ei"

#: ../../any.pm_.c:504 ../../any_new.pm_.c:496 ../../interactive.pm_.c:81
#: ../../my_gtk.pm_.c:485 ../../netconnect.pm_.c:88 ../../netconnect.pm_.c:468
#: ../../netconnect_new.pm_.c:146 ../../netconnect_new.pm_.c:507
msgid "Yes"
msgstr "Kyll�"

#: ../../any.pm_.c:505 ../../any_new.pm_.c:497
msgid "See hardware info"
msgstr "Katso laitteistotietoja"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: ../../any.pm_.c:522 ../../any_new.pm_.c:533
#, c-format
msgid "Installing driver for %s card %s"
msgstr "Asetan ajuria %s ohjaimelle %s"

#: ../../any.pm_.c:523 ../../any_new.pm_.c:534
#, c-format
msgid "(module %s)"
msgstr "(moduli %s)"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: ../../any.pm_.c:534 ../../any_new.pm_.c:545
#, c-format
msgid "Which %s driver should I try?"
msgstr "Mit� %s:n ajuria kokeillaan?"

#: ../../any.pm_.c:542 ../../any_new.pm_.c:553
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"Joissakin tapauksissa %s-ajuri tarvitsee lis�tietoja toimiakseen kunnolla,\n"
"joskin tavallisesti se toimii hyvin ilmankin. Haluaisitko antaa ajurille\n"
"lis�m��reit� vai annatko sen itse etsi� tarvitsemansa tiedot? Joskus haku\n"
"voi jumittaa tietokoneen, mutta se ei aiheuta vahinkoa."

#: ../../any.pm_.c:547 ../../any_new.pm_.c:558
msgid "Autoprobe"
msgstr "Automaattihaku"

#: ../../any.pm_.c:547 ../../any_new.pm_.c:558
msgid "Specify options"
msgstr "Lis�asetukset"

#: ../../any.pm_.c:551 ../../any_new.pm_.c:562
#, c-format
msgid "You may now provide its options to module %s."
msgstr "Voit antaa lis�asetuksia modulille %s."

#: ../../any.pm_.c:557 ../../any_new.pm_.c:568
#, c-format
msgid ""
"You may now provide its options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"Voit antaa lis�asetuksia modulille %s.\n"
"Asetukset ovat muotoa ``nimi=arvo nimi2=arvo2 ...''.\n"
"Esimerkiksi, ``io=0x300 irq=7''"

#: ../../any.pm_.c:560 ../../any_new.pm_.c:571
msgid "Module options:"
msgstr "Moduulin optiot:"

#: ../../any.pm_.c:570 ../../any_new.pm_.c:581
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"Modulin %s lataaminen ep�onnistui.\n"
"Haluatko yritt�� muilla asetuksilla?"

# NOTE: this message will be displayed at boot time; that is
# only the ascii charset will be available on most machines
# so use only 7bit for this message (and do transliteration or
# leave it in English, as it is the best for your language)
# 
#: ../../bootloader.pm_.c:234
#, fuzzy, c-format
msgid ""
"Welcome to %s the operating system chooser!\n"
"\n"
"Choose an operating system in the list above or\n"
"wait %d seconds for default boot.\n"
"\n"
msgstr ""
"Tervetuloa %s kayttojarjestelmanvalitsijaan!\n"
"\n"
"Listataksesi mahdolliset valinnat paina <TAB>.\n"
"\n"
"Ladataksesi jonkun niista kirjoita sen nimi ja paina <ENTER>\n"
"tai odota %d sekuntia oletuskaynnistysta.\n"
"\n"

# NOTE: this message will be displayed by grub at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
# The lines must fit on screen, aka length < 80
# and only one line per string for the GRUB messages
#
#: ../../bootloader.pm_.c:596
msgid "Welcome to GRUB the operating system chooser!"
msgstr "Tervetuloa GRUB k�ytt�j�rjestelm�nvalitsijaan!"

# NOTE: this message will be displayed by grub at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
# The lines must fit on screen, aka length < 80
# and only one line per string for the GRUB messages
#
#: ../../bootloader.pm_.c:597
#, c-format
msgid "Use the %c and %c keys for selecting which entry is highlighted."
msgstr "K�yt� %c ja %c n�pp�imi� valitaksesi korostetun tietueen"

# NOTE: this message will be displayed by grub at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
# The lines must fit on screen, aka length < 80
# and only one line per string for the GRUB messages
#
#: ../../bootloader.pm_.c:598
msgid "Press enter to boot the selected OS, 'e' to edit the"
msgstr ""
"Paina enter k�ynnist��ksesi valitun k�ytt�j�rjestelm�n, 'e' muokataksesi"

# NOTE: this message will be displayed by grub at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
# The lines must fit on screen, aka length < 80
# and only one line per string for the GRUB messages
#
#: ../../bootloader.pm_.c:599
msgid "commands before booting, or 'c' for a command-line."
msgstr "komennot ennen k�ynnistyst�, tai 'c' komentoriville"

# NOTE: this message will be displayed by grub at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
# The lines must fit on screen, aka length < 80
# and only one line per string for the GRUB messages
#
#: ../../bootloader.pm_.c:600
#, c-format
msgid "The highlighted entry will be booted automatically in %d seconds."
msgstr "Korostettu tietue k�ynnistet��n automaattisesti %d sekunnissa."

#: ../../bootloader.pm_.c:604
msgid "not enough room in /boot"
msgstr ""

#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
#: ../../bootloader.pm_.c:696
msgid "Desktop"
msgstr "Ty�p�yt�"

#: ../../bootloader.pm_.c:696
msgid "Start Menu"
msgstr "K�ynnistysvalikko"

#: ../../common.pm_.c:610
#, c-format
msgid "%d minutes"
msgstr ""

#: ../../common.pm_.c:612
msgid "1 minute"
msgstr ""

#: ../../common.pm_.c:614
#, fuzzy, c-format
msgid "%d seconds"
msgstr "Lopetan %d sekunnissa"

#: ../../diskdrake.pm_.c:21 ../../diskdrake.pm_.c:427
msgid "Create"
msgstr "Luo"

#: ../../diskdrake.pm_.c:22
msgid "Unmount"
msgstr "Irroita"

#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:429
msgid "Delete"
msgstr "Poista"

#: ../../diskdrake.pm_.c:23
msgid "Format"
msgstr "Alusta"

#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:610
msgid "Resize"
msgstr "Uusi koko"

#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:427
#: ../../diskdrake.pm_.c:480
msgid "Type"
msgstr "Tyyppi"

#: ../../diskdrake.pm_.c:24 ../../diskdrake.pm_.c:500
msgid "Mount point"
msgstr "Liitospaikka"

#: ../../diskdrake.pm_.c:38
msgid "Write /etc/fstab"
msgstr "Kirjoita /etc/fstab"

#: ../../diskdrake.pm_.c:39
msgid "Toggle to expert mode"
msgstr "Vaihda eksperttitilaan"

#: ../../diskdrake.pm_.c:40
msgid "Toggle to normal mode"
msgstr "Vaihda normaalitilaan"

#: ../../diskdrake.pm_.c:41
msgid "Restore from file"
msgstr "Palauta tiedostosta"

#: ../../diskdrake.pm_.c:42
msgid "Save in file"
msgstr "Tallenna tiedostoon"

#: ../../diskdrake.pm_.c:43
msgid "Wizard"
msgstr ""

#: ../../diskdrake.pm_.c:44
msgid "Restore from floppy"
msgstr "Palauta levykkeelt�"

#: ../../diskdrake.pm_.c:45
msgid "Save on floppy"
msgstr "Tallenna levykkeelle"

#: ../../diskdrake.pm_.c:49
msgid "Clear all"
msgstr "Tyhjenn� kaikki"

#: ../../diskdrake.pm_.c:50
msgid "Format all"
msgstr "Alusta kaikki"

#: ../../diskdrake.pm_.c:51
msgid "Auto allocate"
msgstr "Automaattinen varaus"

#: ../../diskdrake.pm_.c:54
msgid "All primary partitions are used"
msgstr "Kaikki prim��riosiot k�ytetty"

#: ../../diskdrake.pm_.c:54
msgid "I can't add any more partition"
msgstr "Uusia osioita ei voida lis�t�"

#: ../../diskdrake.pm_.c:54
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Voidaksesi luoda lis�� osioita tuhoa yksi olemassaoleva osio jotta voisit "
"luoda laajennetun osion"

#: ../../diskdrake.pm_.c:57
msgid "Rescue partition table"
msgstr "Pelasta osiotaulu"

#: ../../diskdrake.pm_.c:58
msgid "Undo"
msgstr "Peruuta"

#: ../../diskdrake.pm_.c:59
msgid "Write partition table"
msgstr "Kirjoita osiotaulu"

#: ../../diskdrake.pm_.c:60
msgid "Reload"
msgstr "Uudelleenlataa"

#: ../../diskdrake.pm_.c:101
msgid "loopback"
msgstr "loopback"

#: ../../diskdrake.pm_.c:114
msgid "Ext2"
msgstr "Ext2"

#: ../../diskdrake.pm_.c:114
msgid "FAT"
msgstr "FAT"

#: ../../diskdrake.pm_.c:114
msgid "HFS"
msgstr ""

#: ../../diskdrake.pm_.c:114
msgid "SunOS"
msgstr ""

#: ../../diskdrake.pm_.c:114
msgid "Swap"
msgstr "Swap"

#: ../../diskdrake.pm_.c:115
msgid "Empty"
msgstr "Tyhj�"

#: ../../diskdrake.pm_.c:115 ../../mouse.pm_.c:125
msgid "Other"
msgstr "Muu"

#: ../../diskdrake.pm_.c:121
msgid "Filesystem types:"
msgstr "Tiedostoj�rjestelmien tyypit:"

#: ../../diskdrake.pm_.c:130
msgid "Details"
msgstr "Yksityiskohdat"

#: ../../diskdrake.pm_.c:144
msgid ""
"You have one big FAT partition\n"
"(generally used by MicroSoft Dos/Windows).\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Sinulla on yksi suuri fat-osio.\n"
"(Yleens� Microsoft DOS/Windowsin k�yt�ss�).\n"
"Ensim�iseksi suositellaan sen koon muutamista\n"
"(klikkaa osiota ja valitse sitten \"Uusi koko\")"

#: ../../diskdrake.pm_.c:149
msgid "Please make a backup of your data first"
msgstr "Tee ensin varmuuskopio tiedoistasi"

#: ../../diskdrake.pm_.c:149 ../../diskdrake.pm_.c:166
#: ../../diskdrake.pm_.c:175 ../../diskdrake.pm_.c:532
#: ../../diskdrake.pm_.c:554
msgid "Read carefully!"
msgstr "Lue tarkkaan!"

#: ../../diskdrake.pm_.c:152
msgid ""
"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Jos meinaat k�ytt�� aboot:a, varmista ett� j�t�t vapaata tilaa (2048 "
"sektoria on tarpeeksi)\n"
"levyn alkuun"

#: ../../diskdrake.pm_.c:166
msgid "Be careful: this operation is dangerous."
msgstr "Varo: t�m� on vaarallinen toiminto"

#: ../../diskdrake.pm_.c:203 ../../install_steps.pm_.c:73
#: ../../install_steps_interactive.pm_.c:38
#: ../../install_steps_interactive.pm_.c:315 ../../standalone/diskdrake_.c:60
#: ../../standalone/rpmdrake_.c:294 ../../standalone/rpmdrake_.c:304
msgid "Error"
msgstr "Virhe"

#: ../../diskdrake.pm_.c:227 ../../diskdrake.pm_.c:708
msgid "Mount point: "
msgstr "Liitospiste:"

#: ../../diskdrake.pm_.c:228 ../../diskdrake.pm_.c:269
msgid "Device: "
msgstr "Laite:"

#: ../../diskdrake.pm_.c:229
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS-asema: %s (vain arvaus)\n"

#: ../../diskdrake.pm_.c:230 ../../diskdrake.pm_.c:272
msgid "Type: "
msgstr "Tyyppi: "

#: ../../diskdrake.pm_.c:231
#, c-format
msgid "Start: sector %s\n"
msgstr "Aloita: sektori %s\n"

# mat
#: ../../diskdrake.pm_.c:232
#, c-format
msgid "Size: %d MB"
msgstr "Koko: %d Mt"

#: ../../diskdrake.pm_.c:234
#, c-format
msgid ", %s sectors"
msgstr ", %s sektoria"

#: ../../diskdrake.pm_.c:236
#, c-format
msgid "Cylinder %d to cylinder %d\n"
msgstr "Sylinterist� %d sylinteriin %d\n"

#: ../../diskdrake.pm_.c:237
msgid "Formatted\n"
msgstr "Alustettu\n"

#: ../../diskdrake.pm_.c:238
msgid "Not formatted\n"
msgstr "Ei alustettu\n"

#: ../../diskdrake.pm_.c:239
msgid "Mounted\n"
msgstr "Liitetty\n"

#: ../../diskdrake.pm_.c:240
#, c-format
msgid "RAID md%s\n"
msgstr "RAID md%s\n"

#: ../../diskdrake.pm_.c:241
#, c-format
msgid "Loopback file(s): %s\n"
msgstr "Loopback tiedostot: %s\n"

#: ../../diskdrake.pm_.c:242
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Osoiolta k�ynnistet��n oletuksena\n"
"    (MS-DOS k�ynnistys, ei lilo)\n"

#: ../../diskdrake.pm_.c:244
#, c-format
msgid "Level %s\n"
msgstr "Taso %s\n"

#: ../../diskdrake.pm_.c:245
#, c-format
msgid "Chunk size %s\n"
msgstr "Palan koko %s\n"

#: ../../diskdrake.pm_.c:246
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID-levyt %s\n"

#: ../../diskdrake.pm_.c:248
#, c-format
msgid "Loopback file name: %s"
msgstr "Loopback-tiedoston nimi: %s"

#: ../../diskdrake.pm_.c:265
msgid "Please click on a partition"
msgstr "Klikkaa osiota"

#: ../../diskdrake.pm_.c:270
#, c-format
msgid "Size: %d MB\n"
msgstr "Koko: %d Mt\n"

#: ../../diskdrake.pm_.c:271
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Geometria: %s sylinteri�, %s lukup��t�, %s sektoria\n"

# mat
#: ../../diskdrake.pm_.c:273
#, c-format
msgid "Partition table type: %s\n"
msgstr "Osion tyyppi: %s\n"

#: ../../diskdrake.pm_.c:274
#, c-format
msgid "on bus %d id %d\n"
msgstr "v�yl�ss� %d id %d\n"

#: ../../diskdrake.pm_.c:290
msgid "Mount"
msgstr "Liit�"

#: ../../diskdrake.pm_.c:292
msgid "Active"
msgstr "Aktiivinen"

#: ../../diskdrake.pm_.c:294
msgid "Add to RAID"
msgstr "Lis�� RAID:n"

#: ../../diskdrake.pm_.c:296
msgid "Remove from RAID"
msgstr "Poista RAID:ta"

#: ../../diskdrake.pm_.c:298
msgid "Modify RAID"
msgstr "Muokkaa RAID:a"

#: ../../diskdrake.pm_.c:300
msgid "Use for loopback"
msgstr "K�yt� loopback-tiedostoa"

#: ../../diskdrake.pm_.c:307
msgid "Choose action"
msgstr "Valitse toiminne"

#: ../../diskdrake.pm_.c:400
msgid ""
"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
"1024).\n"
"Either you use LILO and it won't work, or you don't use LILO and you don't "
"need /boot"
msgstr ""
"/boot hakemistoa ei voida luoda n�in pitk�lle levyll� (sylinterille joka on "
"> 1024).\n"
"Joko k�yt�t LILO:a ja se ei toimi, tai et k�yt� LILO:a jolloin et tarvitse "
"/boot hakemistoa"

#: ../../diskdrake.pm_.c:404
msgid ""
"The partition you've selected to add as root (/) is physically located "
"beyond\n"
"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
"If you plan to use the LILO boot manager, be careful to add a /boot partition"
msgstr ""
"Osio jolle valitsit juuren (/) on fyysisesti yli 1024 sylinterin levyll�,\n"
"eik� sinulla ole /boot osiota.\n"
"Jos haluat k�ytt�� LILO k�ynnistyksenhallintaa, lis�� /boot osio."

#: ../../diskdrake.pm_.c:410
#, fuzzy
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"So be careful to add a /boot partition"
msgstr ""
"Olet valinnut ohjelmallisen RAID-osion juuriosioksi (/).\n"
"Mik��n k�ynnistyslataaja ei osaa k�sitell� t�t� ilman /boot osiota.\n"
"Varmista ett� lis�sit /boot osion jos haluat k�ytt�� liloa tai grub:a"

#: ../../diskdrake.pm_.c:427 ../../diskdrake.pm_.c:429
#, c-format
msgid "Use ``%s'' instead"
msgstr "K�yt� sijalla ``%s'':��"

#: ../../diskdrake.pm_.c:432
msgid "Use ``Unmount'' first"
msgstr "K�yt� ensin ``Irroita'' komentoa"

# mat
#: ../../diskdrake.pm_.c:433 ../../diskdrake.pm_.c:475
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr "Osion %s tyypin vaihtamisen j�lkeen kaikki tiedot h�vi�v�t"

#: ../../diskdrake.pm_.c:445
msgid "Continue anyway?"
msgstr "Jatka kuitenkin?"

#: ../../diskdrake.pm_.c:450
msgid "Quit without saving"
msgstr "Lopeta tallentamatta"

#: ../../diskdrake.pm_.c:450
msgid "Quit without writing the partition table?"
msgstr "Lopeta kirjoittamatta osiotalua?"

#: ../../diskdrake.pm_.c:478
msgid "Change partition type"
msgstr "Muuta osiotyyppi�"

#: ../../diskdrake.pm_.c:479
#, fuzzy
msgid "Which filesystem do you want?"
msgstr "Mink� osiotyypin haluat?"

#: ../../diskdrake.pm_.c:482 ../../diskdrake.pm_.c:740
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr ""

# mat
#: ../../diskdrake.pm_.c:498
#, c-format
msgid "Where do you want to mount loopback file %s?"
msgstr "Minne haluat liitt�� loopback-tiedoston %s?"

#: ../../diskdrake.pm_.c:499
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Minne haluat liitt�� laitteen %s?"

#: ../../diskdrake.pm_.c:504
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Ei voida poistaa liitospistett� koska osiota k�ytt��n loopback-tilassa.\n"
"Poista loopback-tiedosto ensin"

# mat
#: ../../diskdrake.pm_.c:523
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "Osion %s alustuksen j�lkeen kaikki tiedot h�vi�v�t"

#: ../../diskdrake.pm_.c:525
msgid "Formatting"
msgstr "Alustan"

# mat
#: ../../diskdrake.pm_.c:526
#, c-format
msgid "Formatting loopback file %s"
msgstr "Alustan loopback-osiota %s"

#: ../../diskdrake.pm_.c:527 ../../install_steps_interactive.pm_.c:402
#, c-format
msgid "Formatting partition %s"
msgstr "Alustan osiota %s"

#: ../../diskdrake.pm_.c:532
msgid "After formatting all partitions,"
msgstr "Kaikkien osioiden alustuksen j�lkeen,"

#: ../../diskdrake.pm_.c:532
msgid "all data on these partitions will be lost"
msgstr "kaikki tieto osioilla tuhoutuu"

#: ../../diskdrake.pm_.c:538
msgid "Move"
msgstr "Siirr�"

#: ../../diskdrake.pm_.c:539
msgid "Which disk do you want to move it to?"
msgstr "Mille levylle haluat siirt��?"

#: ../../diskdrake.pm_.c:540
msgid "Sector"
msgstr "Sektori"

#: ../../diskdrake.pm_.c:541
msgid "Which sector do you want to move it to?"
msgstr "Mille sektorille haluat siirt��?"

#: ../../diskdrake.pm_.c:544
msgid "Moving"
msgstr "Siirr�n"

#: ../../diskdrake.pm_.c:544
msgid "Moving partition..."
msgstr "Siirr�n osiota..."

#: ../../diskdrake.pm_.c:554
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "Levyn %s osiotaulu kirjotetaan levylle!"

#: ../../diskdrake.pm_.c:556
msgid "You'll need to reboot before the modification can take place"
msgstr "Sinun t�ytyy k�ynnist�� kone uudelleen jotta muutos tulee voimaan"

#: ../../diskdrake.pm_.c:577
msgid "Computing FAT filesystem bounds"
msgstr "Lasken fat-tiedostoj�rjestelm�n rajoja"

#: ../../diskdrake.pm_.c:577 ../../diskdrake.pm_.c:637
#: ../../install_interactive.pm_.c:107
msgid "Resizing"
msgstr "Muutan kokoa"

#: ../../diskdrake.pm_.c:600
#, fuzzy
msgid "This partition is not resizeable"
msgstr "Mink� osiotyypin haluat?"

#: ../../diskdrake.pm_.c:605
msgid "All data on this partition should be backed-up"
msgstr "kaikki osion tiedot tulee varmuuskopioida"

# mat
#: ../../diskdrake.pm_.c:607
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "Osion %s koon muutoksen j�lkeen kaikki osion tiedot tuhoutuvat"

#: ../../diskdrake.pm_.c:617
msgid "Choose the new size"
msgstr "Valitse uusi koko"

#: ../../diskdrake.pm_.c:617 ../../install_steps_graphical.pm_.c:287
#: ../../install_steps_graphical.pm_.c:334
#: ../../install_steps_interactive.pm_.c:518
#: ../../partition_table_raw.pm_.c:101
msgid "MB"
msgstr "Mt"

#: ../../diskdrake.pm_.c:674
msgid "Create a new partition"
msgstr "Luo uusi osio"

#: ../../diskdrake.pm_.c:700
msgid "Start sector: "
msgstr "Aloitussektori: "

#: ../../diskdrake.pm_.c:704 ../../diskdrake.pm_.c:779
msgid "Size in MB: "
msgstr "Koko Mt: "

#: ../../diskdrake.pm_.c:707 ../../diskdrake.pm_.c:782
msgid "Filesystem type: "
msgstr "Tiedostoj�rjestelm�: "

#: ../../diskdrake.pm_.c:710
msgid "Preference: "
msgstr "Etuoikeus: "

#: ../../diskdrake.pm_.c:758
msgid "This partition can't be used for loopback"
msgstr "Osiota ei voida k�ytt�� loopback-osiona"

#: ../../diskdrake.pm_.c:768
msgid "Loopback"
msgstr "Loopback"

#: ../../diskdrake.pm_.c:778
msgid "Loopback file name: "
msgstr "Loopback tiedostonimi: "

#: ../../diskdrake.pm_.c:804
msgid "File already used by another loopback, choose another one"
msgstr "Tiedosto on jo k�yt�ss� toiselle loopbackille, valitse toinen"

#: ../../diskdrake.pm_.c:805
msgid "File already exists. Use it?"
msgstr "Tiedosto on jo olemassa. K�yt� sit�?"

#: ../../diskdrake.pm_.c:827 ../../diskdrake.pm_.c:843
msgid "Select file"
msgstr "Valitse tiedosto"

#: ../../diskdrake.pm_.c:836
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"Varmuskopio-osiotaululla ei ole samaa kokoa\n"
"Jatka silti?"

#: ../../diskdrake.pm_.c:844
msgid "Warning"
msgstr "Varoitus"

#: ../../diskdrake.pm_.c:845
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"Aseta levyke asemaan\n"
"Kaikki levykkeen tiedot h�vi�v�t"

#: ../../diskdrake.pm_.c:856
msgid "Trying to rescue partition table"
msgstr "Yrit�n osiotalulun palautusta"

#: ../../diskdrake.pm_.c:867
msgid "device"
msgstr "laite"

#: ../../diskdrake.pm_.c:868
msgid "level"
msgstr "taso"

#: ../../diskdrake.pm_.c:869
msgid "chunk size"
msgstr "palan koko"

#: ../../diskdrake.pm_.c:881
msgid "Choose an existing RAID to add to"
msgstr "Valitse olemassaoleva RAID johon lis�t��n"

#: ../../diskdrake.pm_.c:882
msgid "new"
msgstr "uusi"

#: ../../fs.pm_.c:88 ../../fs.pm_.c:95 ../../fs.pm_.c:101 ../../fs.pm_.c:107
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s:n alustus %s:ta ep�onnistui"

#: ../../fs.pm_.c:133
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr "en osaa alustaa %s:�� tyyppi� %s"

#: ../../fs.pm_.c:218
msgid "mount failed: "
msgstr "liitt�minen ep�onnistui: "

#: ../../fs.pm_.c:230
#, c-format
msgid "error unmounting %s: %s"
msgstr "virhe irroitettaessa %s: %s"

#: ../../fsedit.pm_.c:235
msgid "Mount points must begin with a leading /"
msgstr "Liitospisteen pit�� alkaa /-merkill�."

# mat
#: ../../fsedit.pm_.c:238
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "Osiolla on jo liitospiste %s\n"

#: ../../fsedit.pm_.c:246
#, c-format
msgid "Circular mounts %s\n"
msgstr "Rengasmaisia liitoksia %s\n"

#: ../../fsedit.pm_.c:258
msgid "This directory should remain within the root filesystem"
msgstr ""

#: ../../fsedit.pm_.c:259
msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
msgstr ""

#: ../../fsedit.pm_.c:335
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "Virhe avattaessa tiedostoa %s kirjotettavaksi: %s"

#: ../../fsedit.pm_.c:417
msgid ""
"An error has occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"On tapahtunut virhe - ei l�ytynyt laitteita joille luotaisiin uusi "
"tiedostoj�rjestelm�. Tarkista laitteistosi korjataksesi ongelman"

#: ../../fsedit.pm_.c:431
msgid "You don't have any partitions!"
msgstr "Sinulla ei ole yht��n osiota!"

#: ../../help.pm_.c:9
#, fuzzy
msgid ""
"Please choose your preferred language for installation and system usage."
msgstr "Valitse haluttu kieli asnnukseen ja j�rjestelm�n k�ytt��n."

#: ../../help.pm_.c:12
msgid ""
"You need to accept the terms of the above license to continue installation.\n"
"\n"
"\n"
"Please click on \"Accept\" if you agree with its terms.\n"
"\n"
"\n"
"Please click on \"Refuse\" if you disagree with its terms. Installation will "
"end without modifying your current\n"
"configuration."
msgstr ""

#: ../../help.pm_.c:22
msgid "Choose the layout corresponding to your keyboard from the list above"
msgstr "Valitse n�pp�imist�n j�rjestys allaolevasta listasta"

#: ../../help.pm_.c:25
msgid ""
"If you wish other languages (than the one you choose at\n"
"beginning of installation) will be available after installation, please "
"chose\n"
"them in list above. If you want select all, you just need to select \"All\"."
msgstr ""

#: ../../help.pm_.c:30
msgid ""
"Please choose \"Install\" if there are no previous version of "
"Linux-Mandrake\n"
"installed or if you wish to use several operating systems.\n"
"\n"
"\n"
"Please choose \"Update\" if you wish to update an already installed version "
"of Linux-Mandrake.\n"
"\n"
"\n"
"Depend of your knowledge in GNU/Linux, you can choose one of the following "
"levels to install or update your\n"
"Linux-Mandrake operating system:\n"
"\n"
"\t* Recommanded: if you have never installed a GNU/Linux operating system "
"choose this. Installation will be\n"
"\t  be very easy and you will be asked only on few questions.\n"
"\n"
"\n"
"\t* Customized: if you are familiar enough with GNU/Linux, you may choose "
"the primary usage (workstation, server,\n"
"\t  development) of your sytem. You will need to answer to more questions "
"than in \"Recommanded\" installation\n"
"\t  class, so you need to know how GNU/Linux works to choose this "
"installation class.\n"
"\n"
"\n"
"\t* Expert: if you have a good knowledge in GNU/Linux, you can choose this "
"installation class. As in \"Customized\"\n"
"\t  installation class, you will be able to choose the primary usage "
"(workstation, server, development). Be very\n"
"\t  careful before choose this installation class. You will be able to "
"perform a higly customized installation.\n"
"\t  Answer to some questions can be very difficult if you haven't a good "
"knowledge in GNU/Linux. So, don't choose\n"
"\t  this installation class unless you know what you are doing."
msgstr ""

#: ../../help.pm_.c:56
msgid ""
"Select:\n"
"\n"
"  - Customized: If you are familiar enough with GNU/Linux, you may then "
"choose\n"
"    the primary usage for your machine. See below for details.\n"
"\n"
"\n"
"  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
"    perform a highly customized installation. As for a \"Customized\"\n"
"    installation class, you will be able to select the usage for your "
"system.\n"
"    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
"DOING!"
msgstr ""
"Valitse:\n"
"\n"
"  - Muokattu: Jos tunnet GNU/Linuxin ennest��n, voit valita erikseen koneen "
"k�ytt�tarkoituksen.\n"
"    Katso alta lis�tietoja.\n"
"\n"
"\n"
"  - Ekspertti: Valinta edellytt��, ett� tunnet GNU/Linuxin ennest��n hyvin "
"ja haluat tehd�\n"
"    eritt�in mukautetun asennuksen. My�s t�ss� luokassa voit valita koneesi "
"k�ytt�tarkoituksen.\n"
"    Mutta �l� valitse t�t�, JOS ET TIED� MIT� TEET!"

#: ../../help.pm_.c:68
msgid ""
"You must now define your machine usage. Choices are:\n"
"\n"
"\t* Workstation: this the ideal choice if you intend to use your machine "
"primarily for everyday use, at office or\n"
"\t  at home.\n"
"\n"
"\n"
"\t* Development: if you intend to use your machine primarily for software "
"development, it is the good choice. You\n"
"\t  will then have a complete collection of software installed in order to "
"compile, debug and format source code,\n"
"\t  or create software packages.\n"
"\n"
"\n"
"\t* Server: if you intend to use this machine as a server, it is the good "
"choice. Either a file server (NFS or\n"
"\t  SMB), a print server (Unix style or Microsoft Windows style), an "
"authentication server (NIS), a database\n"
"\t  server and so on. As such, do not expect any gimmicks (KDE, GNOME, etc.) "
"to be installed."
msgstr ""

#: ../../help.pm_.c:84
msgid ""
"DrakX will attempt to look for PCI SCSI adapter(s). If DrakX\n"
"finds an SCSI adapter and knows which driver to use, it will be "
"automatically\n"
"installed.\n"
"\n"
"\n"
"If you have no SCSI adapter, an ISA SCSI adapter or a PCI SCSI adapter that\n"
"DrakX doesn't recognize, you will be asked if a SCSI adapter is present in "
"your\n"
"system. If there is no adapter present, you can click on \"No\". If you "
"click on\n"
"\"Yes\", a list of drivers will be presented from which you can select your\n"
"specific adapter.\n"
"\n"
"\n"
"If you have to manually specify your adapter, DrakX will ask if you want to\n"
"specify options for it. You should allow DrakX to probe the hardware for "
"the\n"
"options. This usually works well.\n"
"\n"
"\n"
"If not, you will need to provide options to the driver. Please review the "
"User\n"
"Guide (chapter 3, section \"Collective informations on your hardware) for "
"hints\n"
"on retrieving this information from hardware documentation, from the\n"
"manufacturer's Web site (if you have Internet access) or from Microsoft "
"Windows\n"
"(if you have it on your system)."
msgstr ""

#: ../../help.pm_.c:108
msgid ""
"At this point, you need to choose where to install your\n"
"Linux-Mandrake operating system on your hard drive. If it is empty or if an\n"
"existing operating system uses all the space available on it, you need to\n"
"partition it. Basically, partitioning a hard drive consists of logically\n"
"dividing it to create space to install your new Linux-Mandrake system.\n"
"\n"
"\n"
"Because the effects of the partitioning process are usually irreversible,\n"
"partitioning can be intimidating and stressful if you are an inexperienced "
"user.\n"
"This wizard simplifies this process. Before beginning, please consult the "
"manual\n"
"and take your time.\n"
"\n"
"\n"
"You need at least two partitions. One is for the operating system itself and "
"the\n"
"other is for the virtual memory (also called Swap).\n"
"\n"
"\n"
"If partitions have been already defined (from a previous installation or "
"from\n"
"another partitioning tool), you just need choose those to use to install "
"your\n"
"Linux system.\n"
"\n"
"\n"
"If partitions haven't been already defined, you need to create them. \n"
"To do that, use the wizard available above. Depending of your hard drive\n"
"configuration, several solutions can be available:\n"
"\n"
"\t* Use existing partition: the wizard has detected one or more existing "
"Linux partitions on your hard drive. If\n"
"\t  you want to keep them, choose this option. \n"
"\n"
"\n"
"\t* Erase entire disk: if you want delete all data and all partitions "
"present on your hard drive and replace them by\n"
"\t  your new Linux-Mandrake system, you can choose this option. Be careful "
"with this solution, you will not be\n"
"\t  able to revert your choice after confirmation.\n"
"\n"
"\n"
"\t* Use the free space on the Windows partition: if Microsoft Windows is "
"installed on your hard drive and takes\n"
"\t  all space available on it, you have to create free space for Linux data. "
"To do that you can delete your\n"
"\t  Microsoft Windows partition and data (see \"Erase entire disk\" or "
"\"Expert mode\" solutions) or resize your\n"
"\t  Microsoft Windows partition. Resizing can be performed without loss of "
"any data. This solution is\n"
"\t  recommended if you want use both Linux-Mandrake and Microsoft Windows on "
"same computer.\n"
"\n"
"\n"
"\t  Before choosing this solution, please understand that the size of your "
"Microsoft\n"
"\t  Windows partition will be smaller than at present time. It means that "
"you will have less free space under\n"
"\t  Microsoft Windows to store your data or install new software.\n"
"\n"
"\n"
"\t* Expert mode: if you want to partition manually your hard drive, you can "
"choose this option. Be careful before\n"
"\t  choosing this solution. It is powerful but it is very dangerous. You can "
"lose all your data very easily. So,\n"
"\t  don't choose this solution unless you know what you are doing."
msgstr ""

#: ../../help.pm_.c:160
msgid ""
"At this point, you need to choose what\n"
"partition(s) to use to install your new Linux-Mandrake system. If "
"partitions\n"
"have been already defined (from a previous installation of GNU/Linux or "
"from\n"
"another partitioning tool), you can use existing partitions. In other "
"cases,\n"
"hard drive partitions must be defined.\n"
"\n"
"\n"
"To create partitions, you must first select a hard drive. You can select "
"the\n"
"disk for partitioning by clicking on \"hda\" for the first IDE drive, "
"\"hdb\" for\n"
"the second or \"sda\" for the first SCSI drive and so on.\n"
"\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
"   * Clear all: this option deletes all partitions available on the selected "
"hard drive.\n"
"\n"
"\n"
"   * Auto allocate:: this option allows you to automatically create Ext2 and "
"swap partitions in free space of your\n"
"     hard drive.\n"
"\n"
"\n"
"   * Rescue partition table: if your partition table is damaged, you can try "
"to recover it using this option. Please\n"
"     be careful and remember that it can fail.\n"
"\n"
"\n"
"   * Undo: you can use this option to cancel your changes.\n"
"\n"
"\n"
"   * Reload: you can use this option if you wish to undo all changes and "
"load your initial partitions table\n"
"\n"
"\n"
"   * Wizard: If you wish to use a wizard to partition your hard drive, you "
"can use this option. It is recommended if\n"
"     you do not have a good knowledge in partitioning.\n"
"\n"
"\n"
"   * Restore from floppy: if you have saved your partition table on a floppy "
"during a previous installation, you can\n"
"     recover it using this option.\n"
"\n"
"\n"
"   * Save on floppy: if you wish to save your partition table on a floppy to "
"be able to recover it, you can use this\n"
"     option. It is strongly recommended to use this option\n"
"\n"
"\n"
"   * Done: when you have finished partitioning your hard drive, use this "
"option to save your changes.\n"
"\n"
"\n"
"For information, you can reach any option using the keyboard: navigate "
"trough the partitions using Tab and Up/Down arrows.\n"
"\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
"           * Ctrl-c to create a new partition (when a empty partition is "
"selected)\n"
"\n"
"           * Ctrl-d to delete a partition\n"
"\n"
"           * Ctrl-m to set the mount point"
msgstr ""

#: ../../help.pm_.c:218
msgid ""
"Above are listed the existing Linux partitions detected on\n"
"your hard drive. You can keep choices make by the wizard, they are good for "
"a\n"
"common usage. If you change these choices, you must at least define a root\n"
"partition (\"/\"). Don't choose a too little partition or you will not be "
"able\n"
"to install enough software. If you want store your data on a separate "
"partition,\n"
"you need also to choose a \"/home\" (only possible if you have more than "
"one\n"
"Linux partition available).\n"
"\n"
"\n"
"For information, each partition is listed as follows: \"Name\", "
"\"Capacity\".\n"
"\n"
"\n"
"\"Name\" is coded as follow: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and "
"\"sd\"\n"
"if it is an SCSI hard drive.\n"
"\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE "
"hard drives:\n"
"\n"
"   * \"a\" means \"master hard drive on the primary IDE controller\",\n"
"\n"
"   * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
"\n"
"   * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
"\n"
"   * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"\n"
"With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means "
"\"secondary hard drive\", etc..."
msgstr ""

#: ../../help.pm_.c:252
msgid ""
"Choose the hard drive you want to erase to install your\n"
"new Linux-Mandrake partition. Be careful, all data present on it will be "
"lost\n"
"and will not be recoverable."
msgstr ""

#: ../../help.pm_.c:257
msgid ""
"Click on \"OK\" if you want to delete all data and\n"
"partitions present on this hard drive. Be careful, after clicking on \"OK\", "
"you\n"
"will not be able to recover any data and partitions present on this hard "
"drive,\n"
"including any Windows data.\n"
"\n"
"\n"
"Click on \"Cancel\" to cancel this operation without losing any data and\n"
"partitions present on this hard drive."
msgstr ""

#: ../../help.pm_.c:267
msgid ""
"More than one Microsoft Windows partition have been\n"
"detected on your hard drive. Please choose the one you want resize to "
"install\n"
"your new Linux-Mandrake operating system.\n"
"\n"
"\n"
"For information, each partition is listed as follow; \"Linux name\", "
"\"Windows\n"
"name\" \"Capacity\".\n"
"\n"
"\"Linux name\" is coded as follow: \"hard drive type\", \"hard drive "
"number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and "
"\"sd\"\n"
"if it is an SCSI hard drive.\n"
"\n"
"\n"
"\"Hard drive number\" is always a letter putted after \"hd\" or \"sd\". With "
"IDE hard drives:\n"
"\n"
"   * \"a\" means \"master hard drive on the primary IDE controller\",\n"
"\n"
"   * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
"\n"
"   * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
"\n"
"   * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means "
"\"secondary hard drive\", etc.\n"
"\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first "
"disk\n"
"or partition is called \"C:\")."
msgstr ""

#: ../../help.pm_.c:300
msgid "Please be patient. This operation can take several minutes."
msgstr ""

#: ../../help.pm_.c:303
msgid ""
"Any partitions that have been newly defined must be\n"
"formatted for use (formatting meaning creating a filesystem).\n"
"\n"
"\n"
"At this time, you may wish to reformat some already existing partitions to "
"erase\n"
"the data they contain. If you wish do that, please also select the "
"partitions\n"
"you want to format.\n"
"\n"
"\n"
"Please note that it is not necessary to reformat all pre-existing "
"partitions.\n"
"You must reformat the partitions containing the operating system (such as "
"\"/\",\n"
"\"/usr\" or \"/var\") but do you no have to reformat partitions containing "
"data\n"
"that you wish to keep (typically /home).\n"
"\n"
"\n"
"Please be careful selecting partitions, after formatting, all data will be\n"
"deleted and you will not be able to recover any of them.\n"
"\n"
"\n"
"Click on \"OK\" when you are ready to format partitions.\n"
"\n"
"\n"
"Click on \"Cancel\" if you want to choose other partitions to install your "
"new\n"
"Linux-Mandrake operating system."
msgstr ""

#: ../../help.pm_.c:329
#, fuzzy
msgid ""
"You may now select the group of packages you wish to\n"
"install or upgrade.\n"
"\n"
"\n"
"DrakX will then check whether you have enough room to install them all. If "
"not,\n"
"it will warn you about it. If you want to go on anyway, it will proceed onto "
"the\n"
"installation of all selected groups but will drop some packages of lesser\n"
"interest. At the bottom of the list you can select the option \n"
"\"Individual package selection\"; in this case you will have to browse "
"through\n"
"more than 1000 packages..."
msgstr ""
"Voit nyt pakettien ryhm�n joita haluat asentaa\n"
"tai p�ivitt��.\n"
"\n"
"DrakX tarkistaa t�m�n j�lkeen vapaan levytilan riitt�vyyden.\n"
"Jos tila ei riit� ohjelma varoittaa sinua. Jos haluat kuitenkin\n"
"jatkaa ohjelma tiputtaa v�hemm�n t�rkeit� paketteja asennuksesta.\n"
"Listan alaosassa on \"Yksitt�isten pakettien valinta\" optio, jos\n"
"haluat selata yli 1000 pakettia l�pi."

#: ../../help.pm_.c:341
msgid ""
"You can now choose individually all the packages you\n"
"wish to install.\n"
"\n"
"\n"
"You can expand or collapse the tree by clicking on options in the left "
"corner of\n"
"the packages window.\n"
"\n"
"\n"
"If you prefer to see packages sorted in alphabetic order, click on the icon\n"
"\"Toggle flat and group sorted\".\n"
"\n"
"\n"
"If you want not to be warned on dependencies, click on \"Automatic\n"
"dependencies\". If you do this, note that unselecting one package may "
"silently\n"
"unselect several other packages which depend on it."
msgstr ""

#: ../../help.pm_.c:358
#, fuzzy
msgid ""
"If you have all the CDs in the list above, click Ok. If you have\n"
"none of those CDs, click Cancel. If only some CDs are missing, unselect "
"them,\n"
"then click Ok."
msgstr ""
"Jos sinulla on kaikki CD:t allaolevalta listalta, paina Ok.\n"
"Jos sinulla ei ole yht��n levyist�, paina Peruuta.\n"
"Jos jotkut levyist� puuttuvat, poista niiden valinnat, ja paina Ok"

#: ../../help.pm_.c:363
msgid ""
"Your new Linux-Mandrake operating system is currently being\n"
"installed. This operation should take a few minutes (it depends on size you\n"
"choose to install and the speed of your computer).\n"
"\n"
"\n"
"Please be patient."
msgstr ""

#: ../../help.pm_.c:371
msgid ""
"You can now test your mouse. Use buttons and wheel to verify\n"
"if settings are good. If not, you can click on \"Cancel\" to choose another\n"
"driver."
msgstr ""

#: ../../help.pm_.c:376
#, fuzzy
msgid ""
"Please select the correct port. For example, the COM1\n"
"port under MS Windows is named ttyS0 under GNU/Linux."
msgstr ""
"Valitse oikea portti. Esimerkiksi COM1 portti MS Windowsissa\n"
"on nimelt��n ttyS0 Linuxissa."

#: ../../help.pm_.c:380
msgid ""
"If you wish to connect your computer to the Internet or\n"
"to a local network please choose the correct option. Please turn on your "
"device\n"
"before choosing the correct option to let DrakX detect it automatically.\n"
"\n"
"\n"
"If you do not have any connection to the Internet or a local network, "
"choose\n"
"\"Disable networking\".\n"
"\n"
"\n"
"If you wish to configure the network later after installation or if you "
"have\n"
"finished to configure your network connection, choose \"Done\"."
msgstr ""

#: ../../help.pm_.c:393
msgid ""
"No modem has been detected. Please select the serial port on which it is "
"plugged.\n"
"\n"
"\n"
"For information, the first serial port (called \"COM1\" under Microsoft\n"
"Windows) is called \"ttyS0\" under Linux."
msgstr ""

#: ../../help.pm_.c:400
msgid ""
"You may now enter dialup options. If you don't know\n"
"or are not sure what to enter, the correct informations can be obtained "
"from\n"
"your Internet Service Provider. If you do not enter the DNS (name server)\n"
"information here, this information will be obtained from your Internet "
"Service\n"
"Provider at connection time."
msgstr ""

#: ../../help.pm_.c:407
msgid ""
"If your modem is an external modem, please turn on it now to let DrakX "
"detect it automatically."
msgstr ""

#: ../../help.pm_.c:410
msgid "Please turn on your modem and choose the correct one."
msgstr ""

#: ../../help.pm_.c:413
msgid ""
"If you are not sure if informations above are\n"
"correct or if you don't know or are not sure what to enter, the correct\n"
"informations can be obtained from your Internet Service Provider. If you do "
"not\n"
"enter the DNS (name server) information here, this information will be "
"obtained\n"
"from your Internet Service Provider at connection time."
msgstr ""

#: ../../help.pm_.c:420
#, fuzzy
msgid ""
"You may now enter your host name if needed. If you\n"
"don't know or are not sure what to enter, the correct informations can be\n"
"obtained from your Internet Service Provider."
msgstr ""
"Voit antaa nyt soittoyhteyden asetukset. Jos et ole varma mit� kenttiin\n"
"kirjotetaan oikeat tiedot saat Internet palveluntarjoajaltasi."

#: ../../help.pm_.c:425
#, fuzzy
msgid ""
"You may now configure your network device.\n"
"\n"
"   * IP address: if you don't know or are not sure what to enter, ask your "
"network administrator.\n"
"     You should not enter an IP address if you select the option \"Automatic "
"IP\" below.\n"
"\n"
"   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
"know or are not sure what to enter,\n"
"     ask your network administrator.\n"
"\n"
"   * Automatic IP: if your network uses BOOTP or DHCP protocol, select this "
"option. If selected, no value is needed in\n"
"    \"IP address\". If you don't know or are not sure if you need to select "
"this option, ask your network administrator."
msgstr ""
"Sy�t�:\n"
"\n"
"  - IP-osoite: jos et tied� osoitetta kysy sit� verkkoyll�pit�j�lt�si.\n"
"\n"
"\n"
"  - Verkkopeite: \"255.255.255.0\" on yleens� hyv� valinta. Jos et ole\n"
"asiasta varma kysy verkkoyll�pit�j�lt�si.\n"
"\n"
"\n"
"  - Automaattinen IP: Jos verkkosi k�ytt�� bootp tai dhcpd -protokollia,\n"
"valitse t�m� optio. Jos t�m� valitaan ei  \"IP-osoite\" kentt�� tarvitse\n"
"t�ytt��. Jos et ole asiasta varma kysy berkkoyll�pit�k�lt�si.\n"

#: ../../help.pm_.c:437
#, fuzzy
msgid ""
"You may now enter your host name if needed. If you\n"
"don't know or are not sure what to enter, ask your network administrator."
msgstr ""
"Jos verkkosi k�ytt�� NIS:�, valita \"K�yt� NIS:�\". Jos et ole varma "
"asiasta\n"
"kysy verkkoyll�pit�j�lt�si."

#: ../../help.pm_.c:441
msgid ""
"You may now enter your host name if needed. If you\n"
"don't know or are not sure what to enter, leave blank."
msgstr ""

#: ../../help.pm_.c:445
msgid ""
"You may now enter dialup options. If you're not sure what to enter, the\n"
"correct information can be obtained from your ISP."
msgstr ""
"Voit antaa nyt soittoyhteyden asetukset. Jos et ole varma mit� kenttiin\n"
"kirjotetaan oikeat tiedot saat Internet palveluntarjoajaltasi."

#: ../../help.pm_.c:449
msgid ""
"If you will use proxies, please configure them now. If you don't know if\n"
"you should use proxies, ask your network administrator or your ISP."
msgstr ""
"Jos k�yt�t v�lityspalvelimia aseta ne nyt. Jos et tied� k�yt�tk�\n"
"v�lityspalvelimia kysy verkkoyll�pit�j�lt�si tai Internet\n"
"palveluntarjoajaltasi."

#: ../../help.pm_.c:453
#, fuzzy
msgid ""
"You can install cryptographic package if your internet connection has been\n"
"set up correctly. First choose a mirror where you wish to download packages "
"and\n"
"after that select the packages to install.\n"
"\n"
"\n"
"Note you have to select mirror and cryptographic packages according\n"
"to your legislation."
msgstr ""
"Et voi asentaa salakirjoituspaketteja jos internet-yhteytt�si ei ole\n"
"asetettu. Valitse ensin peilij�rjestelm� josta haluat ladata paketit\n"
"ja t�m�n j�lkeen asennettavat paketit.\n"
"\n"
"Huomaa ett� sinun tulee valita peilij�rjestelm� ja paketit oman maasi\n"
"lains��d�nn�n mukaan."

#: ../../help.pm_.c:462
msgid "You can now select your timezone according to where you live."
msgstr ""

#: ../../help.pm_.c:465
#, fuzzy
msgid ""
"GNU/Linux manages time in GMT (Greenwich Manage\n"
"Time) and translates it in local time according to the time zone you have\n"
"selected.\n"
"\n"
"\n"
"If you use Microsoft Windows on this computer, choose \"No\"."
msgstr ""
"Voit valita aikavy�hykkeen sen mukaan miss� asut.\n"
"\n"
"\n"
"Linux hallitsee aikaa GMT:n� tai \"Greenwich Meridian Aikana\" ja muuttaa "
"sen\n"
"paikalliseen aikaan valitsemasi aikavy�hykkeen mukaan."

#: ../../help.pm_.c:473
#, fuzzy
msgid ""
"You may now choose which services you want to start at boot time.\n"
"\n"
"\n"
"When your mouse comes over an item, a small balloon help will popup which\n"
"describes the role of the service.\n"
"\n"
"\n"
"Be very careful in this step if you intend to use your machine as a server: "
"you\n"
"will probably want not to start any services that you don't need. Please\n"
"remember that several services can be dangerous if they are enable on a "
"server.\n"
"In general, select only the services that you really need."
msgstr ""
"Voit valita mit� palveluita haluat k�ynnist�� koneen k�ynnistyess�.\n"
"Kun siirr�t hiiren osoittimen palvelin p��lle, pieni ohje tulee esiin,\n"
"joka kertoo palvelun tarkoituksen.\n"
"\n"
"Ole varsinkin varovainen n�iss� asetuksissa, jos meinaat k�ytt��\n"
"konettasi palvelimena: et varmaankaan halua k�ynnist�� palveluita,\n"
"joita et k�yt�."

#: ../../help.pm_.c:486
msgid ""
"You can configure a local printer (connected to your computer) or remote\n"
"printer (accessible via a Unix, Netware or Microsoft Windows network)."
msgstr ""

#: ../../help.pm_.c:490
msgid ""
"If you wish to be able to print, please choose one printing system between\n"
"CUPS and LPR.\n"
"\n"
"\n"
"CUPS is a new, powerful and flexible printing system for Unix systems (CUPS\n"
"means \"Common Unix Printing System\"). It is the default printing system "
"in\n"
"Linux-Mandrake.\n"
"\n"
"\n"
"LPR is the old printing system used in previous Linux-Mandrake "
"distributions.\n"
"\n"
"\n"
"If you don't have printer, click on \"None\"."
msgstr ""

#: ../../help.pm_.c:505
msgid ""
"GNU/Linux can deal with many types of printer. Each of these types requires\n"
"a different setup.\n"
"\n"
"\n"
"If your printer is physically connected to your computer, select \"Local\n"
"printer\".\n"
"\n"
"\n"
"If you want to access a printer located on a remote Unix machine, select\n"
"\"Remote printer\".\n"
"\n"
"\n"
"If you want to access a printer located on a remote Microsoft Windows "
"machine\n"
"(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
msgstr ""

#: ../../help.pm_.c:521
msgid ""
"Please turn on your printer before continuing to let DrakX detect it.\n"
"\n"
"You have to enter some informations here.\n"
"\n"
"\n"
"   * Name of printer: the print spooler uses \"lp\" as default printer name. "
"So, you must have a printer named \"lp\".\n"
"     If you have only one printer, you can use several names for it. You "
"just need to separate them by a pipe\n"
"     character (a \"|\"). So, if you prefer a more meaningful name, you have "
"to put it first, eg: \"My printer|lp\".\n"
"     The printer having \"lp\" in its name(s) will be the default printer.\n"
"\n"
"\n"
"   * Description: this is optional but can be useful if several printers are "
"connected to your computer or if you allow\n"
"     other computers to access to this printer.\n"
"\n"
"\n"
"   * Location: if you want to put some information on your\n"
"     printer location, put it here (you are free to write what\n"
"     you want, for example \"2nd floor\").\n"
msgstr ""

#: ../../help.pm_.c:542
msgid ""
"You need to enter some informations here.\n"
"\n"
"\n"
"   * Name of queue: the print spooler uses \"lp\" as default printer name. "
"So, you need have a printer named \"lp\".\n"
"    If you have only one printer, you can use several names for it. You just "
"need to separate them by a pipe\n"
"    character (a \"|\"). So, if you prefer to have a more meaningful name, "
"you have to put it first, eg: \"My printer|lp\".\n"
"    The printer having \"lp\" in its name(s) will be the default printer.\n"
"\n"
"  \n"
"   * Spool directory: it is in this directory that printing jobs are stored. "
"Keep the default choice\n"
"     if you don't know what to use\n"
"\n"
"\n"
"   * Printer Connection: If your printer is physically connected to your "
"computer, select \"Local printer\".\n"
"     If you want to access a printer located on a remote Unix machine, "
"select \"Remote lpd printer\".\n"
"\n"
"\n"
"     If you want to access a printer located on a remote Microsoft Windows "
"machine (or on Unix machine using SMB\n"
"     protocol), select \"SMB/Windows 95/98/NT\".\n"
"\n"
"\n"
"     If you want to acces a printer located on NetWare network, select "
"\"NetWare\".\n"
msgstr ""

#: ../../help.pm_.c:567
msgid ""
"Your printer has not been detected. Please enter the name of the device on\n"
"which it is connected.\n"
"\n"
"\n"
"For information, most printers are connected on the first parallel port. "
"This\n"
"one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
"Windows."
msgstr ""

#: ../../help.pm_.c:575
msgid "You must now select your printer in the above list."
msgstr ""

#: ../../help.pm_.c:578
msgid ""
"Please select the right options according to your printer.\n"
"Please see its documentation if you don't know what choose here.\n"
"\n"
"\n"
"You will be able to test your configuration in next step and you will be "
"able to modify it if it doesn't work as you want."
msgstr ""

#: ../../help.pm_.c:585
#, fuzzy
msgid ""
"You can now enter the root password for your Linux-Mandrake system.\n"
"The password must be entered twice to verify that both password entries are "
"identical.\n"
"\n"
"\n"
"Root is the system's administrator and is the only user allowed to modify "
"the\n"
"system configuration. Therefore, choose this password carefully. \n"
"Unauthorized use of the root account can be extemely dangerous to the "
"integrity\n"
"of the system, its data and other system connected to it.\n"
"\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. It should never be written down.\n"
"\n"
"\n"
"Do not make the password too long or complicated, though: you must be able "
"to\n"
"remember it without too much effort."
msgstr ""
"Voit antaa nyt root salasanan Linux-Mandrake j�rjestelm�llesi.\n"
"Salasana tulee antaa kaksi kertaa jotta salasanan oikeellisuudesta\n"
"varmistutaan.\n"
"\n"
"\n"
"Root on j�rjestelm�n yll�pit�j�, ja ainoa k�ytt�j� jolla on\n"
"oikeudet muuttaa j�rjestelm�n asetuksia. T�m�n vuoksi valitse\n"
"salasana huolellisesti! Root tunnuksen sallimaton k�ytt� voi olla\n"
"hyvin vaarallista j�rjestelm�n kunnolle, sen tiedoille\n"
"sek� muille siihen kytketyille j�rjestelmille. Salasanan tulee\n"
"olla sekoitus kirjaimia ja v�hint��n 8 merkki� pitk�. Salasanaa ei\n"
"*koskaan* tule kirjoittaa paperille. �l� tee salasanasta kuitenkaan\n"
"liian monimutkaista, sinun tulee muistaa se ilman liian suurta vaivaa."

#: ../../help.pm_.c:603
msgid ""
"To enable a more secure system, you should select \"Use shadow file\" and\n"
"\"Use MD5 passwords\"."
msgstr ""
"Tehd�ksesi j�rjestelm�st�si turvallisemman valitse \"K�yt� "
"shadow-tiedostoa\" ja\n"
"\"K�yt� MD5-salasanoja\"."

#: ../../help.pm_.c:607
msgid ""
"If your network uses NIS, select \"Use NIS\". If you don't know, ask your\n"
"network administrator."
msgstr ""
"Jos verkkosi k�ytt�� NIS:�, valita \"K�yt� NIS:�\". Jos et ole varma "
"asiasta\n"
"kysy verkkoyll�pit�j�lt�si."

#: ../../help.pm_.c:611
msgid ""
"You may now create one or more \"regular\" user account(s), as\n"
"opposed to the \"privileged\" user account, root. You can create\n"
"one or more account(s) for each person you want to allow to use\n"
"the computer. Note that each user account will have its own\n"
"preferences (graphical environment, program settings, etc.)\n"
"and its own \"home directory\", in which these preferences are\n"
"stored.\n"
"\n"
"\n"
"First of all, create an account for yourself! Even if you will be the only "
"user\n"
"of the machine, you may NOT connect as root for daily use of the system: "
"it's a\n"
"very high security risk. Making the system unusable is very often a typo "
"away.\n"
"\n"
"\n"
"Therefore, you should connect to the system using the user account\n"
"you will have created here, and login as root only for administration\n"
"and maintenance purposes."
msgstr ""
"Voit nyt luoda yhden tai useamman \"tavallisen\" k�ytt�j�tunnuksen,\n"
"joiden vastakohtana on \"p��k�ytt�j�\" k�ytt�j�tunnus, root. Voit\n"
"luoda yhden tai useampia tunnuksia jokaiselle henkil�lle jolle annat\n"
"oikeuden k�ytt�� j�rjestelm��. Huomaa ett� jokaisella k�ytt�j�tunnuksella\n"
"on omat asetuksensa (graafinen k�ytt�liittym�, ohjelmien asetukset jne.)\n"
"ja oma \"kotihakemisto\" jonne asetukset talletetaan.\n"
"\n"
"\n"
"Luo ensin tunnus itsellesi! Vaikka olisit ainoa k�ytt�j� sinun ei tule\n"
"k�ytt�� root tunnusta p�ivitt�in, se on eritt�in suuri tietoturvariski.\n"
"P��k�ytt�j� voi sekoittaa j�rjestelm�n eritt�in helpolla.\n"
"\n"
"\n"
"Eli sinun tulee kirjautua j�rjestelm��n tunnuksella jonka luot t��ll� ja\n"
"k�ytt�� root tunnusta vain j�rjestelm�n yll�pitoon."

#: ../../help.pm_.c:630
msgid ""
"Creating a boot disk is strongly recommended. If you can't\n"
"boot your computer, it's the only way to rescue your system without\n"
"reinstalling it."
msgstr ""

#: ../../help.pm_.c:635
#, fuzzy
msgid ""
"You need to indicate where you wish\n"
"to place the information required to boot to GNU/Linux.\n"
"\n"
"\n"
"Unless you know exactly what you are doing, choose \"First sector of\n"
"drive (MBR)\"."
msgstr ""
"Sinun tulee kertoa minne haluat\n"
"sijoittaa tarvittavat tiedot Linuxin k�ynnist�miseksi.\n"
"\n"
"\n"
"Jos et todella tied� mit� teet, valitse \"Ensimm�inen levyn\n"
"sektori (MBR)\"."

#: ../../help.pm_.c:643
msgid ""
"Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
" (primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
msgstr ""
"Jos et tied� tarkemmin, niin yleinen valinta on \"/dev/hda\"\n"
"(prim��rinen master IDE-levyn ).tai \"/dev/sda\" (ensimm�inen SCSI-levy)."

#: ../../help.pm_.c:647
msgid ""
"LILO (the LInux LOader) and Grub are bootloaders: they are able to boot\n"
"either GNU/Linux or any other operating system present on your computer.\n"
"Normally, these other operating systems are correctly detected and\n"
"installed. If this is not the case, you can add an entry by hand in this\n"
"screen. Be careful as to choose the correct parameters.\n"
"\n"
"\n"
"You may also want not to give access to these other operating systems to\n"
"anyone, in which case you can delete the corresponding entries. But\n"
"in this case, you will need a boot disk in order to boot them!"
msgstr ""

#: ../../help.pm_.c:659
#, fuzzy
msgid ""
"LILO and grub main options are:\n"
"  - Boot device: Sets the name of the device (e.g. a hard disk\n"
"partition) that contains the boot sector. Unless you know specifically\n"
"otherwise, choose \"/dev/hda\".\n"
"\n"
"\n"
"  - Delay before booting default image: Specifies the number in tenths\n"
"of a second the boot loader should wait before booting the first image.\n"
"This is useful on systems that immediately boot from the hard disk after\n"
"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
"omitted or is set to zero.\n"
"\n"
"\n"
"  - Video mode: This specifies the VGA text mode that should be selected\n"
"when booting. The following values are available: \n"
"\n"
"    * normal: select normal 80x25 text mode.\n"
"\n"
"    * <number>:  use the corresponding text mode."
msgstr ""
"LILO:n p��asetukset ovat:\n"
"  - K�ynnistyslaite: Asettaa laitteen (esim. kiintolevyn osion)\n"
"joka sis�lt�� k�ynnistyslohkon. Ellet ole varma mit� valitsisit\n"
"valitse \"/dev/hda\".\n"
"\n"
"\n"
"  - Lineaarinen: Luo lineaarisia sektoriosotteita sektori/lukup��/\n"
"sylinteri osotteiden sijasta. Lineaariset osoitteet muutetaan ajon\n"
"aikana eiv�tk� riipu levyn geometriasta. Huomaa ett� k�ynnistyslevyt\n"
"eiv�t ole siirrett�vi� jos  \"lineaarinen\"-tilaa k�ytet��n, koska\n"
"BIOS-palvelu jolla levyn geomteria selvitet��n ei toimi luotettavasti\n"
"levykkeill�. Kun k�yt�t \"lineaarinen\"-tilaa isoilla levyill� voi\n"
"/sbin/lilo luoda viitteit� saavuttamattomille levyn alueille koska\n"
"3D sektoriosotteita ei tunneta ennen k�ynnistyst�.\n"
"\n"
"\n"
"  - Kompakti: Yritt�� liitt�� vierekk�isten sektorien luvun yhteen\n"
"pyynt��n. T�m� pienent�� huomattavasti latausaikoja ja tekee kartta-\n"
"tiedostosta pienemm�n. \"Kompakti\"-tilan k�ytt�� suositellaan erityisesti\n"
"jos k�ynnistet��n levykkeelt�.\n"
"\n"
"\n"
"  - Viive ennen oletuslaitteelta k�ynnistyst�: M��rittelee "
"kymmenesosasekunteina\n"
"kuinka kauan lataaj odottaa ennenkuin k�ynnist�� ensimm�isen tiedoston.\n"
"T�m� on hy�dyllinen asetus j�rjestelmiss� joissa halutaan k�ynnistyksen "
"tapahtuvan\n"
" heti kun n�pp�imist� on k�ytett�viss�. K�ynnistyslataaja ei odota jos "
"\"viive\" on\n"
"nolla tai sit� ei ole ollenkaan.\n"
"\n"
"\n"
"  - Videotila: M��rittelee halutun VGA tekstitilan joka valitaan\n"
"k�ynnistett�ess�. Seuraavia arvoja voidaan k�ytt��: \n"
"    * normaali: valitse normaali 80x25 tekstitila.\n"
"    * <numero>:  k�yt� numeroa vastaavaa tekstitilaa."

#: ../../help.pm_.c:680
msgid ""
"SILO is a bootloader for SPARC: it is able to boot\n"
"either GNU/Linux or any other operating system present on your computer.\n"
"Normally, these other operating systems are correctly detected and\n"
"installed. If this is not the case, you can add an entry by hand in this\n"
"screen. Be careful as to choose the correct parameters.\n"
"\n"
"\n"
"You may also want not to give access to these other operating systems to\n"
"anyone, in which case you can delete the corresponding entries. But\n"
"in this case, you will need a boot disk in order to boot them!"
msgstr ""

#: ../../help.pm_.c:692
#, fuzzy
msgid ""
"SILO main options are:\n"
"  - Bootloader installation: Indicate where you want to place the\n"
"information required to boot to GNU/Linux. Unless you know exactly\n"
"what you are doing, choose \"First sector of drive (MBR)\".\n"
"\n"
"\n"
"  - Delay before booting default image: Specifies the number in tenths\n"
"of a second the boot loader should wait before booting the first image.\n"
"This is useful on systems that immediately boot from the hard disk after\n"
"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
"omitted or is set to zero."
msgstr ""
"LILO:n p��asetukset ovat:\n"
"  - K�ynnistyslaite: Asettaa laitteen (esim. kiintolevyn osion)\n"
"joka sis�lt�� k�ynnistyslohkon. Ellet ole varma mit� valitsisit\n"
"valitse \"/dev/hda\".\n"
"\n"
"\n"
"  - Lineaarinen: Luo lineaarisia sektoriosotteita sektori/lukup��/\n"
"sylinteri osotteiden sijasta. Lineaariset osoitteet muutetaan ajon\n"
"aikana eiv�tk� riipu levyn geometriasta. Huomaa ett� k�ynnistyslevyt\n"
"eiv�t ole siirrett�vi� jos  \"lineaarinen\"-tilaa k�ytet��n, koska\n"
"BIOS-palvelu jolla levyn geomteria selvitet��n ei toimi luotettavasti\n"
"levykkeill�. Kun k�yt�t \"lineaarinen\"-tilaa isoilla levyill� voi\n"
"/sbin/lilo luoda viitteit� saavuttamattomille levyn alueille koska\n"
"3D sektoriosotteita ei tunneta ennen k�ynnistyst�.\n"
"\n"
"\n"
"  - Kompakti: Yritt�� liitt�� vierekk�isten sektorien luvun yhteen\n"
"pyynt��n. T�m� pienent�� huomattavasti latausaikoja ja tekee kartta-\n"
"tiedostosta pienemm�n. \"Kompakti\"-tilan k�ytt�� suositellaan erityisesti\n"
"jos k�ynnistet��n levykkeelt�.\n"
"\n"
"\n"
"  - Viive ennen oletuslaitteelta k�ynnistyst�: M��rittelee "
"kymmenesosasekunteina\n"
"kuinka kauan lataaj odottaa ennenkuin k�ynnist�� ensimm�isen tiedoston.\n"
"T�m� on hy�dyllinen asetus j�rjestelmiss� joissa halutaan k�ynnistyksen "
"tapahtuvan\n"
" heti kun n�pp�imist� on k�ytett�viss�. K�ynnistyslataaja ei odota jos "
"\"viive\" on\n"
"nolla tai sit� ei ole ollenkaan.\n"
"\n"
"\n"
"  - Videotila: M��rittelee halutun VGA tekstitilan joka valitaan\n"
"k�ynnistett�ess�. Seuraavia arvoja voidaan k�ytt��: \n"
"    * normaali: valitse normaali 80x25 tekstitila.\n"
"    * <numero>:  k�yt� numeroa vastaavaa tekstitilaa."

#: ../../help.pm_.c:705
#, fuzzy
msgid ""
"Now it's time to configure the X Window System, which is the\n"
"core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
"you must configure your video card and monitor. Most of these\n"
"steps are automated, though, therefore your work may only consist\n"
"of verifying what has been done and accept the settings :)\n"
"\n"
"\n"
"When the configuration is over, X will be started (unless you\n"
"ask DrakX not to) so that you can check and see if the\n"
"settings suit you. If they don't, you can come back and\n"
"change them, as many times as necessary."
msgstr ""
"Nyt on X Window Systemin asetusten vuoro, X Window on Linuxin\n"
"graafisen k�ytt�liittym�n ydin. T�m�n vuoksi sinun tulee asettaa,\n"
"n�yt�nohjain sek� n�ytt�. Suurin osa vaiheista on automatisoituja\n"
"ja sinun tulee l�hinn� varmistaa mit� on tehty ja hyv�ksy� asetukset.\n"
"\n"
"\n"
"Kun asetukset on tehty, X k�ynnistet��n (ellet k�skenyt\n"
"DrakX:�� tekem��n toisin) t�ten voit tarkistaa ett� asetukset\n"
"miellytt�v�t sinua. Jos eiv�t, voit palata ja muuttaa niit�\n"
"niin monta kertaa kuin on tarpeen."

#: ../../help.pm_.c:718
msgid ""
"If something is wrong in X configuration, use these options to correctly\n"
"configure the X Window System."
msgstr ""
"Jos jotain meni vikaan X:n asetuksissa, k�yt� n�it� valintoja X:n "
"asettamiseksi\n"
"oikein."

#: ../../help.pm_.c:722
msgid ""
"If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n"
"\"No\"."
msgstr ""
"Jos haluat k�ytt�� graafista sis��nkirjoittautumista valitse \"Kyll�\".\n"
"Muuten valitse \"Ei\"."

#: ../../help.pm_.c:726
#, fuzzy
msgid ""
"You can now select some miscellaneous options for your system.\n"
"\n"
"* Use hard drive optimizations: this option can improve hard disk "
"performance but is only for advanced users. Some buggy\n"
"  chipsets can ruin your data, so beware. Note that the kernel has a builtin "
"blacklist of drives and chipsets, but if\n"
"  you want to avoid bad surprises, leave this option unset.\n"
"\n"
"\n"
"* Choose security level: you can choose a security level for your system. "
"Please refer to the manual for complete\n"
"  information. Basically, if you don't know what to choose, keep the default "
"option.\n"
"\n"
"\n"
"* Precise RAM if needed: unfortunately, there is no standard method to ask "
"the BIOS about the amount of RAM present in\n"
"  your computer. As consequence, Linux may fail to detect your amount of RAM "
"correctly. If this is the case, you can\n"
"  specify the correct amount or RAM here. Please note that a difference of 2 "
"or 4 MB between detected memory and memory\n"
"  present in your system is normal.\n"
"\n"
"\n"
"* Removable media automounting: if you would prefer not to manually mount "
"removable media (CD-Rom, floppy, Zip, etc.) by\n"
"  typing \"mount\" and \"umount\", select this option.\n"
"\n"
"\n"
"* Clean \"/tmp\" at each boot: if you want delete all files and directories "
"stored in \"/tmp\" when you boot your system,\n"
"  select this option.\n"
"\n"
"\n"
"* Enable num lock at startup: if you want NumLock key enabled after booting, "
"select this option. Please note that you\n"
"  should not enable this option on laptops and that NumLock may or may not "
"work under X."
msgstr ""
"Voit nyt asettaa j�rjestelm�n sekalaisia asetuksia.\n"
"\n"
"  - K�yt� kiintolevyn optimointeja: T�m� asetus voi parantaa kiintolevyn\n"
"    k�ytt��. Vain osaavien k�ytt�jien tulee k�ytt�� t�t� asetusta, koska se "
"voi\n"
"    tuhota levyn sis�ll�n v��rin k�ytettyn�. Huomaa, ett� kerneliss� on\n"
"    musta lista huonoista asemista ja ohjaimista, mutta jos haluat v�ltt��\n"
"    yll�tyksi� j�t� asetus valitsematta.\n"
"\n"
"  - Valitse turvallisuustaso: Voit valita turvallisuustason "
"j�rjestelm�llesi.\n"
"    Ohjekirjassa on lis�tietoja valinnasta. Jos et tied� mit� valitsisit\n"
"    valitse \"Keskitaso\"; jos haluat todella turvallisen j�rjestelm�n\n"
"    valitse \"Paranoidi\", mutta huomaa T�LL� TASOLLA P��K�YTT�J�\n"
"    EI VOI KIRJAUTUA SIS��N KONSOLILTA!. Jos haluat toimia p��k�ytt�j�n�\n"
"     sinun tulee kirjautua tavallisena k�ytt�j�n� ja k�ytt�� su-komentoa.\n"
"\n"
"\n"
"  - Tarkka RAM-muistin m��r�: Joissain tapauksissa Linux ei pysty\n"
"    p��ttelem��n oikein j�rjestelm�n muistin m��r��. N�iss� tapauksissa\n"
"    voit asettaa muistin m��r�n k�sin. Huomaa: 2 tai 4 Mt ero on normaalia.\n"
"\n"
"\n"
"  - Poistettavien medioiden automaattiliitt�minen: Jos haluat "
"automaattisesti\n"
"    liitt�� poistettavat mediat (CD-ROM, Levyke, Zip) kirjoittamatta "
"\"mount\"\n"
"    tai \"umount\", valitse t�m� asetus. \n"
"\n"
"\n"
"  - Num Lock p��ll� k�ynnistyksess�: Jos haluat ett� Num Lock on p��ll�\n"
"    k�ynnistyksen j�lkeen valitse t�m� asetus (Huomaa: Num Lock ei toimi\n"
"     silti X:n alla)."

#: ../../help.pm_.c:755
msgid ""
"Your system is going to reboot.\n"
"\n"
"After rebooting, your new Linux Mandrake system will load automatically.\n"
"If you want to boot into another existing operating system, please read\n"
"the additional instructions."
msgstr ""
"J�rjestelm�si k�ynnistet��n uudelleen.\n"
"\n"
"K�ynnistyksen j�lkeen Linux Mandrake j�rjestelm� k�ynnistet��n "
"automaattisesti.\n"
"Jos haluat my�s k�ynnist�� muita koneessa olevia k�ytt�j�rjestelmi� lue\n"
"lis�ohjeita."

#: ../../install2.pm_.c:40
msgid "Choose your language"
msgstr "Valitse kieli"

#: ../../install2.pm_.c:41
msgid "Select installation class"
msgstr "Valitse asennuksen luokka"

#: ../../install2.pm_.c:42
msgid "Hard drive detection"
msgstr "Kiintolevyjen tunnistus"

#: ../../install2.pm_.c:43
msgid "Configure mouse"
msgstr "M��rittele hiiri"

#: ../../install2.pm_.c:44
msgid "Choose your keyboard"
msgstr "Valitse n�pp�imist�"

#: ../../install2.pm_.c:45 ../../install_steps_interactive.pm_.c:497
msgid "Miscellaneous"
msgstr "Sekalaista"

#: ../../install2.pm_.c:46
msgid "Setup filesystems"
msgstr "Aseta tiedostoj�rjestelm�t"

#: ../../install2.pm_.c:47
msgid "Format partitions"
msgstr "Alusta osiot"

#: ../../install2.pm_.c:48
msgid "Choose packages to install"
msgstr "Valitse asennettavat paketit"

#: ../../install2.pm_.c:49
msgid "Install system"
msgstr "Asenna"

#: ../../install2.pm_.c:50
msgid "Configure networking"
msgstr "Aseta verkko"

#: ../../install2.pm_.c:52
msgid "Configure timezone"
msgstr "Aseta aikavy�hyke"

#: ../../install2.pm_.c:53
msgid "Configure services"
msgstr "Asetuspalvelut"

#: ../../install2.pm_.c:54
msgid "Configure printer"
msgstr "Aseta kirjoitin"

#: ../../install2.pm_.c:55 ../../install_steps_interactive.pm_.c:762
#: ../../install_steps_interactive.pm_.c:763
msgid "Set root password"
msgstr "Anna root-salasana"

#: ../../install2.pm_.c:56
msgid "Add a user"
msgstr "Lis�� k�ytt�j�"

#: ../../install2.pm_.c:58
msgid "Create a bootdisk"
msgstr "Luo k�ynnistyslevyke"

#: ../../install2.pm_.c:60
msgid "Install bootloader"
msgstr "Asenna lataaja"

#: ../../install2.pm_.c:61
msgid "Configure X"
msgstr "Aseta X"

#: ../../install2.pm_.c:63
msgid "Auto install floppy"
msgstr "Automaattiasennuslevyke"

#: ../../install2.pm_.c:65
msgid "Exit install"
msgstr "Lopeta asennus"

#: ../../install_any.pm_.c:578
msgid "Error reading file $f"
msgstr "virhe luettaessa tiedostoa $f"

#: ../../install_gtk.pm_.c:426
#, fuzzy
msgid "Please test the mouse"
msgstr "Mink� tyyppinen hiiri sinulla on."

#: ../../install_gtk.pm_.c:427
#, fuzzy
msgid "To activate the mouse,"
msgstr "Mink� tyyppinen hiiri sinulla on."

#: ../../install_gtk.pm_.c:428
msgid "MOVE YOUR WHEEL!"
msgstr ""

#: ../../install_interactive.pm_.c:23
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""

#: ../../install_interactive.pm_.c:41
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"Sinulla tulee olla juuriosio.\n"
"T�t� varten luo osio (tai klikkaa olemassaolevaa).\n"
"Valitse sitten toiminto ``Liitospiste'' ja aseta se arvoon `/'"

#: ../../install_interactive.pm_.c:46 ../../install_steps_graphical.pm_.c:259
msgid "You must have a swap partition"
msgstr "Sinulla tulee olla heittovaihtotiedosto"

#: ../../install_interactive.pm_.c:47 ../../install_steps_graphical.pm_.c:261
msgid ""
"You don't have a swap partition\n"
"\n"
"Continue anyway?"
msgstr ""
"Sinulla ei ole heittovaihto-osiota\n"
"\n"
"Jatka kuitenkin?"

#: ../../install_interactive.pm_.c:68
#, fuzzy
msgid "Use free space"
msgstr "K�yt� loopback-tiedostoa"

#: ../../install_interactive.pm_.c:70
msgid "Not enough free space to allocate new partitions"
msgstr ""

#: ../../install_interactive.pm_.c:78
#, fuzzy
msgid "Use existing partition"
msgstr "Alustan osioita"

#: ../../install_interactive.pm_.c:80
#, fuzzy
msgid "There is no existing partition to use"
msgstr "Yrit�n osiotalulun palautusta"

#: ../../install_interactive.pm_.c:87
#, fuzzy
msgid "Use the Windows partition for loopback"
msgstr "K�yt� loopback-tiedostoa"

#: ../../install_interactive.pm_.c:90
#, fuzzy
msgid "Which partition do you want to use for Linux4Win?"
msgstr "Mille osiolle haluat laittaa Linux4Win:n"

#: ../../install_interactive.pm_.c:92
msgid "Choose the sizes"
msgstr "Valitse koot"

#: ../../install_interactive.pm_.c:93
msgid "Root partition size in MB: "
msgstr "Juuriosion koko Mt: "

#: ../../install_interactive.pm_.c:94
msgid "Swap partition size in MB: "
msgstr "Sivutusosion koko Mt: "

#: ../../install_interactive.pm_.c:102
msgid "Use the free space on the Windows partition"
msgstr ""

#: ../../install_interactive.pm_.c:105
#, fuzzy
msgid "Which partition do you want to resize?"
msgstr "Mink� osiotyypin haluat?"

#: ../../install_interactive.pm_.c:107
#, fuzzy
msgid "Computing Windows filesystem bounds"
msgstr "Lasken fat-tiedostoj�rjestelm�n rajoja"

#: ../../install_interactive.pm_.c:110
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occured: %s"
msgstr ""

#: ../../install_interactive.pm_.c:113
msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
msgstr ""

#: ../../install_interactive.pm_.c:114
#, fuzzy
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this operation is\n"
"dangerous. If you have not already done so, you should first exit the\n"
"installation, run scandisk under Windows (and optionally run defrag), then\n"
"restart the installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"VAROITUS!\n"
"\n"
"DrakX:n t�ytyy nyt muuttaa windows osiosi kokoa. Ole varovainen: t�m� "
"toimenpide\n"
"on vaarallinen. Sinun tulisi ensin ajaa scandisk (sek� mahdollisesti "
"defrag)\n"
" t�lle osiolle ja tehd� tiedoistasi varmuuskopio.\n"
"Kun olet tehnyt n�m� toimenpiteet paina Ok."

#: ../../install_interactive.pm_.c:123
#, fuzzy
msgid "Which size do you want to keep for windows on"
msgstr "Mille sektorille haluat siirt��?"

#: ../../install_interactive.pm_.c:124
#, fuzzy, c-format
msgid "partition %s"
msgstr "Osio"

#: ../../install_interactive.pm_.c:130
#, fuzzy, c-format
msgid "FAT resizing failed: %s"
msgstr "Automaattinen koonmuutos ep�onnistui"

#: ../../install_interactive.pm_.c:145
msgid ""
"There is no FAT partitions to resize or to use as loopback (or not enough "
"space left)"
msgstr ""

#: ../../install_interactive.pm_.c:151
msgid "Erase entire disk"
msgstr ""

#: ../../install_interactive.pm_.c:151
msgid "Remove Windows(TM)"
msgstr ""

#: ../../install_interactive.pm_.c:154
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr ""

# mat
#: ../../install_interactive.pm_.c:157
#, fuzzy, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "Osion %s koon muutoksen j�lkeen kaikki osion tiedot tuhoutuvat"

#: ../../install_interactive.pm_.c:165
#, fuzzy
msgid "Expert mode"
msgstr "Ekspertti"

#: ../../install_interactive.pm_.c:165
msgid "Use diskdrake"
msgstr ""

#: ../../install_interactive.pm_.c:169
msgid "Use fdisk"
msgstr ""

#: ../../install_interactive.pm_.c:172
#, fuzzy, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, don't forget to save using `w'"
msgstr ""
"Voit nyt osioda kiintolevysi %s\n"
"Kun olet valmis, �l� unohda tallettaa komennolla 'w'"

#: ../../install_interactive.pm_.c:196
#, fuzzy
msgid "You don't have enough free space on your Windows partition"
msgstr "Sinulla ei ole yht��n windows osiota!"

#: ../../install_interactive.pm_.c:211
#, fuzzy
msgid "I can't find any room for installing"
msgstr "Uusia osioita ei voida lis�t�"

#: ../../install_interactive.pm_.c:214
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr ""

# mat
#: ../../install_interactive.pm_.c:219
#, fuzzy, c-format
msgid "Partitioning failed: %s"
msgstr "Osion tyyppi: %s\n"

#: ../../install_interactive.pm_.c:234
msgid "Bringing up the network"
msgstr "K�ynnist�n verkkoa"

#: ../../install_interactive.pm_.c:239
msgid "Bringing down the network"
msgstr "Ajan alas verkkoa"

#: ../../install_steps.pm_.c:74
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Tapahtui virhe, sit� ei voida k�sitell� kunnolla.\n"
"Jatka omalla riskill�si."

#: ../../install_steps.pm_.c:202
#, c-format
msgid "Duplicate mount point %s"
msgstr "Kahdentunut liitospiste %s"

#: ../../install_steps.pm_.c:385
msgid ""
"Some important packages didn't get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl "
"Mandrake/RPMS/*.rpm\"\n"
msgstr ""

# mat
#: ../../install_steps.pm_.c:458
#, c-format
msgid "Welcome to %s"
msgstr "Tervetuloa %s:n"

#: ../../install_steps.pm_.c:670
msgid "No floppy drive available"
msgstr "Ei levykeasemaa k�ytett�viss�"

#: ../../install_steps_auto_install.pm_.c:43
#: ../../install_steps_stdio.pm_.c:23
#, c-format
msgid "Entering step `%s'\n"
msgstr "Siirryn vaiheeseen `%s'\n"

#: ../../install_steps_graphical.pm_.c:287
msgid "Choose the size you want to install"
msgstr "Valitse asennuksen koko"

#: ../../install_steps_graphical.pm_.c:334
msgid "Total size: "
msgstr "Kokonaiskoko: "

#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:353
#: ../../standalone/rpmdrake_.c:136
#, c-format
msgid "Version: %s\n"
msgstr "Versio: %s\n"

#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:354
#: ../../standalone/rpmdrake_.c:137
#, c-format
msgid "Size: %d KB\n"
msgstr "Koko: %d Kt\n"

#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:260
msgid "Choose the packages you want to install"
msgstr "Valitse asennettavat paketit"

#: ../../install_steps_graphical.pm_.c:465 ../../install_steps_gtk.pm_.c:263
msgid "Info"
msgstr "Tietoja"

#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:268
#: ../../install_steps_interactive.pm_.c:216 ../../standalone/rpmdrake_.c:161
msgid "Install"
msgstr "Asenna"

#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:466
#: ../../install_steps_interactive.pm_.c:594
msgid "Installing"
msgstr "Asennan"

#: ../../install_steps_graphical.pm_.c:499 ../../install_steps_gtk.pm_.c:472
msgid "Please wait, "
msgstr "Odota hetki, "

#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:474
msgid "Time remaining "
msgstr "J�ljell� "

#: ../../install_steps_graphical.pm_.c:502 ../../install_steps_gtk.pm_.c:475
msgid "Total time "
msgstr "Kokonaisaika "

#: ../../install_steps_graphical.pm_.c:507 ../../install_steps_gtk.pm_.c:484
#: ../../install_steps_interactive.pm_.c:594
msgid "Preparing installation"
msgstr "Valmistelen asennusta"

#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:500
#, c-format
msgid "Installing package %s"
msgstr "Asennan pakettia %s"

#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:569
#: ../../install_steps_gtk.pm_.c:573
msgid "Go on anyway?"
msgstr "Jatka kuitenkin?"

#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:569
msgid "There was an error ordering packages:"
msgstr "Tapahtu virhe j�rjestett�ess� paketteja:"

#: ../../install_steps_graphical.pm_.c:577
#: ../../install_steps_interactive.pm_.c:1003
msgid "Use existing configuration for X11?"
msgstr "K�yt� olemassaolevia asetuksia X11:ta?"

#: ../../install_steps_gtk.pm_.c:136
msgid ""
"Your system is low on resource. You may have some problem installing\n"
"Linux-Mandrake. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""

#: ../../install_steps_gtk.pm_.c:150
msgid "Please, choose one of the following classes of installation:"
msgstr "Valitse joku seuraavista asennusluokista:"

#: ../../install_steps_gtk.pm_.c:215
#, c-format
msgid ""
"The total size for the groups you have selected is approximately %d MB.\n"
msgstr "Valitsemiesi ryhmien kokonaiskoko on suunnilleen %d Mt.\n"

#: ../../install_steps_gtk.pm_.c:217
msgid ""
"If you wish to install less than this size,\n"
"select the percentage of packages that you want to install.\n"
"\n"
"A low percentage will install only the most important packages;\n"
"a percentage of 100%% will install all selected packages."
msgstr ""
"Jos haluat asentaa v�hemm�n kuin t�m� koko,\n"
"valitse prosenttiosuus paketeista jonka haluat asentaa.\n"
"\n"
"Pieni prosenttiosuus asentaa vain t�rkeimm�t paketit,\n"
"100%% osuus asentaa kaikki paketit."

#: ../../install_steps_gtk.pm_.c:222
msgid ""
"You have space on your disk for only %d%% of these packages.\n"
"\n"
"If you wish to install less than this,\n"
"select the percentage of packages that you want to install.\n"
"A low percentage will install only the most important packages;\n"
"a percentage of %d%% will install as many packages as possible."
msgstr ""
"Sinulla on levyll� tilaa vain %d%% paketeista\n"
".Jos haulat asentaa v�hemm�n kuin t�m�n osan,\n"
"valitse prosenttiosuus paketeista jotka haluat asentaa.\n"
"Pieni prosentti asentaa vain t�rkeimm�t paketit, %d%%\n"
" prosenttiosuus asentaa niin monta pakettia kuin on mahdollista."

#: ../../install_steps_gtk.pm_.c:228
msgid "You will be able to choose them more specifically in the next step."
msgstr "Voit valita paketit tarkemmin seuraavassa vaiheessa"

#: ../../install_steps_gtk.pm_.c:230
msgid "Percentage of packages to install"
msgstr "Prosenttiosuus asennettavista paketeista"

#: ../../install_steps_gtk.pm_.c:272
msgid "Automatic dependencies"
msgstr "Automaattiset riippuvuudet"

#: ../../install_steps_gtk.pm_.c:332 ../../standalone/rpmdrake_.c:101
msgid "Expand Tree"
msgstr "Laajenna puu"

#: ../../install_steps_gtk.pm_.c:333 ../../standalone/rpmdrake_.c:102
msgid "Collapse Tree"
msgstr "Sulje puu"

#: ../../install_steps_gtk.pm_.c:334
msgid "Toggle between flat and group sorted"
msgstr "Vaihda tasaisen ja ryhm�j�rjestyksen v�lill�"

#: ../../install_steps_gtk.pm_.c:351
msgid "Bad package"
msgstr "Viallinen paketti"

#: ../../install_steps_gtk.pm_.c:352
#, c-format
msgid "Name: %s\n"
msgstr "Nimi: %s\n"

#: ../../install_steps_gtk.pm_.c:355
#, c-format
msgid "Importance: %s\n"
msgstr "T�rkeys: %s\n"

# mat
#: ../../install_steps_gtk.pm_.c:363
#, c-format
msgid "Total size: %d / %d MB"
msgstr "Koko yhteens�: %d / %d Mt"

#: ../../install_steps_gtk.pm_.c:382
#, fuzzy
msgid ""
"You can't select this package as there is not enough space left to install it"
msgstr "Et voi poistaa t�m�n paketin valintaa. Se on jo asennettu"

#: ../../install_steps_gtk.pm_.c:386
#, fuzzy
msgid "The following packages are going to be installed"
msgstr "Seuraavat paketit poistetaan"

#: ../../install_steps_gtk.pm_.c:387
#, fuzzy
msgid "The following packages are going to be removed"
msgstr "Seuraavat paketit asennetaan tai poistetaan"

#: ../../install_steps_gtk.pm_.c:397
msgid "You can't select/unselect this package"
msgstr "Et voi valita/poistaa t�t� pakettia"

#: ../../install_steps_gtk.pm_.c:416
msgid "This is a mandatory package, it can't be unselected"
msgstr "T�m� on pakollinen paketti, sit� ei voida poistaa valinnoista"

#: ../../install_steps_gtk.pm_.c:418
msgid "You can't unselect this package. It is already installed"
msgstr "Et voi poistaa t�m�n paketin valintaa. Se on jo asennettu"

#: ../../install_steps_gtk.pm_.c:422
msgid ""
"This package must be upgraded\n"
"Are you sure you want to deselect it?"
msgstr ""
"T�m� paketti tulee p�ivitt��\n"
"Oletko varma ett� haluat poistaa valinnan?"

#: ../../install_steps_gtk.pm_.c:425
msgid "You can't unselect this package. It must be upgraded"
msgstr "Et voi poistaa t�m�n paketin valintaa. Paketti pit�� p�ivitt��."

#: ../../install_steps_gtk.pm_.c:469
msgid "Estimating"
msgstr "Arvioin"

#: ../../install_steps_gtk.pm_.c:481 ../../interactive.pm_.c:86
#: ../../interactive.pm_.c:249 ../../interactive_newt.pm_.c:51
#: ../../interactive_newt.pm_.c:99 ../../interactive_stdio.pm_.c:27
#: ../../my_gtk.pm_.c:246 ../../my_gtk.pm_.c:486
msgid "Cancel"
msgstr "Peruuta"

#: ../../install_steps_gtk.pm_.c:495
#, c-format
msgid "%d packages"
msgstr "%d pakettia"

#: ../../install_steps_gtk.pm_.c:531
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""

#: ../../install_steps_gtk.pm_.c:559 ../../install_steps_interactive.pm_.c:147
#, fuzzy
msgid "Accept"
msgstr "Hyv�ksy k�ytt�j�"

#: ../../install_steps_gtk.pm_.c:559
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"Vaihda CD-levy�!\n"
"\n"
"Aseta CD-levy nimelt��n \"%s\" CD-asemaan ja paina Ok kun olet valmis.\n"
"Jos sinulla ei ole levy�, paina Peruuta v�ltt��ksesi asennukset t�lt� "
"levylt�."

#: ../../install_steps_gtk.pm_.c:559 ../../install_steps_interactive.pm_.c:147
#, fuzzy
msgid "Refuse"
msgstr "Uusi koko"

#: ../../install_steps_gtk.pm_.c:573
msgid "There was an error installing packages:"
msgstr "Tapahtu virhe asennettaessa paketteja:"

#: ../../install_steps_interactive.pm_.c:38
msgid "An error occurred"
msgstr "Tapahtui virhe"

#: ../../install_steps_interactive.pm_.c:54
msgid "Please, choose a language to use."
msgstr "Valitse k�ytett�v� kieli."

#: ../../install_steps_interactive.pm_.c:70
msgid "License agreement"
msgstr ""

#: ../../install_steps_interactive.pm_.c:71
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the "
"Linux-Mandrake distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Linux-Mandrake distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read carefully this document. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurance of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Linux-Mandrake sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Linux-Mandrake\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"
msgstr ""

#: ../../install_steps_interactive.pm_.c:154
#: ../../standalone/keyboarddrake_.c:21
msgid "Keyboard"
msgstr "N�pp�imist�"

#: ../../install_steps_interactive.pm_.c:155
#: ../../standalone/keyboarddrake_.c:22
msgid "Please, choose your keyboard layout."
msgstr "Valitse n�pp�imist�n j�rjestys."

#: ../../install_steps_interactive.pm_.c:166
msgid "You can choose other languages that will be available after install"
msgstr "Voit valita kielet jotka ovat k�ytett�viss� asennuksen j�lkeen"

#: ../../install_steps_interactive.pm_.c:173
#: ../../install_steps_interactive.pm_.c:520
msgid "All"
msgstr ""

#: ../../install_steps_interactive.pm_.c:181
#: ../../install_steps_interactive.pm_.c:227
msgid "Install Class"
msgstr "Asennusluokka"

#: ../../install_steps_interactive.pm_.c:181
msgid "Which installation class do you want?"
msgstr "Valitse asennuksen luokka?"

#: ../../install_steps_interactive.pm_.c:183
#, fuzzy
msgid "Install/Update"
msgstr "Asenna/P�ivit�"

#: ../../install_steps_interactive.pm_.c:183
#, fuzzy
msgid "Is this an install or an update?"
msgstr "Onko t�m� asennus vai p�ivitys?"

#: ../../install_steps_interactive.pm_.c:192
msgid "Recommended"
msgstr ""

#: ../../install_steps_interactive.pm_.c:195
#: ../../install_steps_interactive.pm_.c:211
msgid "Customized"
msgstr "Mukautettu"

#: ../../install_steps_interactive.pm_.c:196
#: ../../install_steps_interactive.pm_.c:211
msgid "Expert"
msgstr "Ekspertti"

#: ../../install_steps_interactive.pm_.c:206
#, fuzzy
msgid ""
"Are you sure you are an expert? \n"
"You will be allowed to make powerful but dangerous things here.\n"
"\n"
"You will be asked questions such as: ``Use shadow file for passwords?'',\n"
"are you ready to answer that kind of questions?"
msgstr ""
"Oletko varmasti asiantuntija? \n"
"Voit tehd� vaarallisia asioita t��ll�."

#: ../../install_steps_interactive.pm_.c:216
#, fuzzy
msgid "Update"
msgstr "P�ivit�"

#: ../../install_steps_interactive.pm_.c:222
#, fuzzy
msgid "Workstation"
msgstr "Tietoa"

#: ../../install_steps_interactive.pm_.c:223
msgid "Development"
msgstr "Kehitys"

#: ../../install_steps_interactive.pm_.c:224
msgid "Server"
msgstr "Palvelin"

#: ../../install_steps_interactive.pm_.c:228
#, fuzzy
msgid "What is your system used for?"
msgstr "Mihin j�rjestelm��si k�ytet��n ?"

#: ../../install_steps_interactive.pm_.c:244 ../../standalone/mousedrake_.c:24
msgid "Please, choose the type of your mouse."
msgstr "Mink� tyyppinen hiiri sinulla on."

#: ../../install_steps_interactive.pm_.c:251 ../../standalone/mousedrake_.c:40
msgid "Mouse Port"
msgstr "Hiiren portti"

#: ../../install_steps_interactive.pm_.c:252
msgid "Please choose on which serial port your mouse is connected to."
msgstr "Mihin sarjaporttiin hiiresi on liitetty."

#: ../../install_steps_interactive.pm_.c:271
msgid "Configuring PCMCIA cards..."
msgstr "Asetan PCMCIA kortteja...."

#: ../../install_steps_interactive.pm_.c:271
msgid "PCMCIA"
msgstr "PCMCIA"

#: ../../install_steps_interactive.pm_.c:275
msgid "Configuring IDE"
msgstr "Asetan IDE-levy�"

#: ../../install_steps_interactive.pm_.c:275
msgid "IDE"
msgstr "IDE"

#: ../../install_steps_interactive.pm_.c:288
msgid "no available partitions"
msgstr "ei vapaita osioita"

#: ../../install_steps_interactive.pm_.c:291
msgid "Scanning partitions to find mount points"
msgstr ""

#: ../../install_steps_interactive.pm_.c:299
msgid "Choose the mount points"
msgstr "Valitse liitospisteet"

#: ../../install_steps_interactive.pm_.c:316
#, fuzzy, c-format
msgid ""
"I can't read your partition table, it's too corrupted for me :(\n"
"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
"The other solution is to disallow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to loose all the partitions?\n"
msgstr ""
"Osiotaulua ei voida lukea, siin� on liikaa virheit� :(\n"
"Taulu yritet��n korjata nollaamalla se"

#: ../../install_steps_interactive.pm_.c:329
msgid ""
"DiskDrake failed to read correctly the partition table.\n"
"Continue at your own risk!"
msgstr ""
"DiskDrake ei pystynyt lukemaan osiotaulua oikein.\n"
"Jatka omalla vastuullasi!"

#: ../../install_steps_interactive.pm_.c:337
msgid "Root Partition"
msgstr "Juuriosio"

#: ../../install_steps_interactive.pm_.c:338
msgid "What is the root partition (/) of your system?"
msgstr "Mik� on j�rjestelm�si juuriosio (/) ?"

#: ../../install_steps_interactive.pm_.c:352
msgid "You need to reboot for the partition table modifications to take place"
msgstr ""
"Sinun tulee k�ynnist�� j�rjestelm� uudelleen jotta muutokset tulevat voimaan"

#: ../../install_steps_interactive.pm_.c:376
msgid "Choose the partitions you want to format"
msgstr "Valitse alustettavat osiot"

#: ../../install_steps_interactive.pm_.c:386
msgid "Check bad blocks?"
msgstr "Tarkista vialliset lohkot?"

#: ../../install_steps_interactive.pm_.c:397
msgid "Formatting partitions"
msgstr "Alustan osioita"

#: ../../install_steps_interactive.pm_.c:401
#, c-format
msgid "Creating and formatting file %s"
msgstr "Luon ja alustan tiedostoa %s"

#: ../../install_steps_interactive.pm_.c:404
msgid "Not enough swap to fulfill installation, please add some"
msgstr "Heittovaihtotiedosto ei ole riitt�v�n suuri, suurenna sit�"

#: ../../install_steps_interactive.pm_.c:410
msgid "Looking for available packages"
msgstr "Etsin saatavilla olevia paketteja"

#: ../../install_steps_interactive.pm_.c:416
msgid "Finding packages to upgrade"
msgstr "Etsin p�ivitett�vi� paketteja"

#: ../../install_steps_interactive.pm_.c:433
#, fuzzy, c-format
msgid ""
"Your system has not enough space left for installation or upgrade (%d > %d)"
msgstr "J�rjestelm�ss�si ei ole riitt�v�sti tilaa asennukseen tai p�ivitykseen"

#: ../../install_steps_interactive.pm_.c:449
#, fuzzy, c-format
msgid "Complete (%dMB)"
msgstr "Normaali"

#: ../../install_steps_interactive.pm_.c:449
#, fuzzy, c-format
msgid "Minimum (%dMB)"
msgstr "(%dMt)"

#: ../../install_steps_interactive.pm_.c:449
#, fuzzy, c-format
msgid "Recommended (%dMB)"
msgstr "Normaali"

#: ../../install_steps_interactive.pm_.c:455
#, fuzzy
msgid "Custom"
msgstr "Mukautettu"

#: ../../install_steps_interactive.pm_.c:462
#, fuzzy
msgid "Select the size you want to install"
msgstr "Valitse asennuksen koko"

#: ../../install_steps_interactive.pm_.c:508
msgid "Package Group Selection"
msgstr "Paketin ryhm�valinta"

#: ../../install_steps_interactive.pm_.c:521
msgid "Individual package selection"
msgstr "Yksitt�isten pakettien valinta"

#: ../../install_steps_interactive.pm_.c:570
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"Jos sinulla on kaikki CD.levyt allaolevalta listalta, paina OK.\n"
"Jos sinulla ei ole mit��n levyist�, paina Peruuta.\n"
"Jos jotkut levyist� puuttuvat, poista niiden valinnat, ja paina OK."

#: ../../install_steps_interactive.pm_.c:575
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "Cd-Rom nimelt��n \"%s\""

#: ../../install_steps_interactive.pm_.c:603
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"Asennan pakettia %s\n"
"%d%%"

#: ../../install_steps_interactive.pm_.c:612
msgid "Post-install configuration"
msgstr "Asennuksen j�lkeiset toiminnot"

#: ../../install_steps_interactive.pm_.c:637
msgid ""
"You have now the possibility to download software aimed for encryption.\n"
"\n"
"WARNING:\n"
"\n"
"Due to different general requirements applicable to these software and "
"imposed\n"
"by various jurisdictions, customer and/or end user of theses software "
"should\n"
"ensure that the laws of his/their jurisdiction allow him/them to download, "
"stock\n"
"and/or use these software.\n"
"\n"
"In addition customer and/or end user shall particularly be aware to not "
"infringe\n"
"the laws of his/their jurisdiction. Should customer and/or end user not\n"
"respect the provision of these applicable laws, he/they will incure serious\n"
"sanctions.\n"
"\n"
"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
"liable\n"
"for special, indirect or incidental damages whatsoever (including, but not\n"
"limited to loss of profits, business interruption, loss of commercial data "
"and\n"
"other pecuniary losses, and eventual liabilities and indemnification to be "
"paid\n"
"pursuant to a court decision) arising out of use, possession, or the sole\n"
"downloading of these software, to which customer and/or end user could\n"
"eventually have access after having sign up the present agreement.\n"
"\n"
"\n"
"For any queries relating to these agreement, please contact \n"
"Mandrakesoft, Inc.\n"
"2400 N. Lincoln Avenue Suite 243\n"
"Altadena California 91001\n"
"USA"
msgstr ""

#: ../../install_steps_interactive.pm_.c:669
msgid "Choose a mirror from which to get the packages"
msgstr "Valitse peilij�rjestelm� josta paketit haetaan"

#: ../../install_steps_interactive.pm_.c:680
msgid "Contacting the mirror to get the list of available packages"
msgstr "Yhdist�n peilij�rjestelm��n hakeakseni uusimman pakettilistan"

#: ../../install_steps_interactive.pm_.c:683
msgid "Please choose the packages you want to install."
msgstr "Valitse asennettavat paketit."

#: ../../install_steps_interactive.pm_.c:695
#, fuzzy
msgid "Which is your timezone?"
msgstr "Mihin j�rjestelm��si k�ytet��n ?"

#: ../../install_steps_interactive.pm_.c:697
msgid "Is your hardware clock set to GMT?"
msgstr "Onko koneen kello asetettu GMT aikaan?"

#: ../../install_steps_interactive.pm_.c:735
#, fuzzy
msgid "Which printing system do you want to use?"
msgstr "Mink� osiotyypin haluat?"

#: ../../install_steps_interactive.pm_.c:762
msgid "No password"
msgstr "Ei salasanaa"

#: ../../install_steps_interactive.pm_.c:767
msgid "Use shadow file"
msgstr "K�yt� shadow-tiedostoa"

#: ../../install_steps_interactive.pm_.c:767
msgid "shadow"
msgstr "shadow"

#: ../../install_steps_interactive.pm_.c:768
msgid "MD5"
msgstr "MD5"

#: ../../install_steps_interactive.pm_.c:768
msgid "Use MD5 passwords"
msgstr "K�yt� MD5 salasanoja"

#: ../../install_steps_interactive.pm_.c:770
msgid "Use NIS"
msgstr "K�yt� NIS:�"

#: ../../install_steps_interactive.pm_.c:770
msgid "yellow pages"
msgstr "keltaiset sivut"

#: ../../install_steps_interactive.pm_.c:776
#, c-format
msgid "This password is too simple (must be at least %d characters long)"
msgstr ""
"Salasana on liian yksinkertainen (sen tulee olla ainakin %d merkki� pitk�)"

#: ../../install_steps_interactive.pm_.c:783
msgid "Authentification NIS"
msgstr "Tunnistus NIS"

#: ../../install_steps_interactive.pm_.c:784
msgid "NIS Domain"
msgstr "NIS-alue"

#: ../../install_steps_interactive.pm_.c:784
msgid "NIS Server"
msgstr "NIS-palvelin"

#: ../../install_steps_interactive.pm_.c:809
#: ../../standalone/adduserdrake_.c:36
msgid "Accept user"
msgstr "Hyv�ksy k�ytt�j�"

#: ../../install_steps_interactive.pm_.c:809
#: ../../standalone/adduserdrake_.c:36
msgid "Add user"
msgstr "Lis�� k�ytt�j�"

#: ../../install_steps_interactive.pm_.c:810
#: ../../standalone/adduserdrake_.c:37
#, c-format
msgid "(already added %s)"
msgstr "(jo lis�tty %s)"

#: ../../install_steps_interactive.pm_.c:810
#: ../../standalone/adduserdrake_.c:37
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Aseta k�ytt�j�\n"
"%s"

#: ../../install_steps_interactive.pm_.c:812
#: ../../standalone/adduserdrake_.c:39
msgid "Real name"
msgstr "Oikea nimi"

#: ../../install_steps_interactive.pm_.c:813 ../../printerdrake.pm_.c:93
#: ../../printerdrake.pm_.c:127 ../../standalone/adduserdrake_.c:40
msgid "User name"
msgstr "K�ytt�j�tunnus"

#: ../../install_steps_interactive.pm_.c:818
#: ../../standalone/adduserdrake_.c:45
msgid "Shell"
msgstr "Komentotulkki"

#: ../../install_steps_interactive.pm_.c:820
#: ../../standalone/adduserdrake_.c:47
msgid "Icon"
msgstr "Kuvake"

#: ../../install_steps_interactive.pm_.c:830
#: ../../standalone/adduserdrake_.c:57
msgid "This password is too simple"
msgstr "Salasana on liian yksinkertainen"

#: ../../install_steps_interactive.pm_.c:831
#: ../../standalone/adduserdrake_.c:58
msgid "Please give a user name"
msgstr "Anna k�ytt�j�tunnus"

#: ../../install_steps_interactive.pm_.c:832
#: ../../standalone/adduserdrake_.c:59
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""
"K�ytt�j�tunnus saa sis�lt�� vain pieni� kirjaimia, numeroita, `-' ja `_'"

#: ../../install_steps_interactive.pm_.c:833
#: ../../standalone/adduserdrake_.c:60
msgid "This user name is already added"
msgstr "K�ytt�j�tunnus on jo lis�tty"

#: ../../install_steps_interactive.pm_.c:857
#, fuzzy
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"SILO on your system, or another operating system removes SILO, or SILO "
"doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures.\n"
"\n"
"If you want to create a bootdisk for your system, insert a floppy in the "
"first\n"
"drive and press \"Ok\"."
msgstr ""
"Mukautetulla k�ynnistyslevykkeell� voit k�ynnist�� j�rjestelm�n ilman\n"
"tavanomaisen k�ytt�j�rjestelm�lataajan apua. T�st� on hy�ty�, jos et halua\n"
"asentaa LILOa (tai grubia) j�rjestelm��si, toinen k�ytt�j�rjestelm� poistaa\n"
"LILOn, tai LILO ei toimi laitteistossasi. Mukautettua k�ynnistyslevykett� "
"voidaan\n"
"k�ytt�� my�s Mandraken vikasietolevykkeen kanssa, jolloin vakavista\n"
"j�rjestelm�n virhetilanteista on helpompi toipua.\n"
"Haluatko luoda k�ynnistyslevykkeen j�rjestelm��si?"

#: ../../install_steps_interactive.pm_.c:873
msgid "First floppy drive"
msgstr "Ensimm�inen levyasema"

#: ../../install_steps_interactive.pm_.c:874
msgid "Second floppy drive"
msgstr "Toinen levyasema"

#: ../../install_steps_interactive.pm_.c:875
msgid "Skip"
msgstr "Ohita"

#: ../../install_steps_interactive.pm_.c:880
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"LILO (or grub) on your system, or another operating system removes LILO, or "
"LILO doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures. Would you like to create a bootdisk for your system?"
msgstr ""
"Mukautetulla k�ynnistyslevykkeell� voit k�ynnist�� j�rjestelm�n ilman\n"
"tavanomaisen k�ytt�j�rjestelm�lataajan apua. T�st� on hy�ty�, jos et halua\n"
"asentaa LILOa (tai grubia) j�rjestelm��si, toinen k�ytt�j�rjestelm� poistaa\n"
"LILOn, tai LILO ei toimi laitteistossasi. Mukautettua k�ynnistyslevykett� "
"voidaan\n"
"k�ytt�� my�s Mandraken vikasietolevykkeen kanssa, jolloin vakavista\n"
"j�rjestelm�n virhetilanteista on helpompi toipua.\n"
"Haluatko luoda k�ynnistyslevykkeen j�rjestelm��si?"

#: ../../install_steps_interactive.pm_.c:889
msgid "Sorry, no floppy drive available"
msgstr "Levyajuria ei ole saatavilla"

#: ../../install_steps_interactive.pm_.c:892
msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr "Valitse levyasema jolla luot k�ynnistyslevykkeen"

#: ../../install_steps_interactive.pm_.c:898
#, c-format
msgid "Insert a floppy in drive %s"
msgstr "Aseta tyhj� levyke levyasemaan %s"

#: ../../install_steps_interactive.pm_.c:901
msgid "Creating bootdisk"
msgstr "Luon k�ynnistyslevykett�"

#: ../../install_steps_interactive.pm_.c:908
msgid "Preparing bootloader"
msgstr "Valmistelen k�ytt�j�rjestelm�n lataajaa"

#: ../../install_steps_interactive.pm_.c:917
#, fuzzy
msgid "Do you want to use aboot?"
msgstr "Haluatko k�ytt�� SILOa?"

#: ../../install_steps_interactive.pm_.c:920
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"Virhe asennettaessa aboot:a,\n"
"yrit� pakkoasennusta vaikka se tuhoaa ensimm�isen osion?"

#: ../../install_steps_interactive.pm_.c:929
#, fuzzy
msgid "Installation of bootloader failed. The following error occured:"
msgstr "LILO:n asennus ep�onnistu. Seuraava virhe tapahtui:"

#: ../../install_steps_interactive.pm_.c:943 ../../standalone/draksec_.c:20
msgid "Welcome To Crackers"
msgstr "Tervetuloa murtautujat"

#: ../../install_steps_interactive.pm_.c:944 ../../standalone/draksec_.c:21
msgid "Poor"
msgstr "Huono"

#: ../../install_steps_interactive.pm_.c:945 ../../standalone/draksec_.c:22
msgid "Low"
msgstr "Matala"

#: ../../install_steps_interactive.pm_.c:946 ../../standalone/draksec_.c:23
msgid "Medium"
msgstr "Keski"

#: ../../install_steps_interactive.pm_.c:947 ../../standalone/draksec_.c:24
msgid "High"
msgstr "Korkea"

#: ../../install_steps_interactive.pm_.c:948 ../../standalone/draksec_.c:25
msgid "Paranoid"
msgstr "Paranoidi"

#: ../../install_steps_interactive.pm_.c:962
msgid "Miscellaneous questions"
msgstr "Sekalaiset kysymykset"

#: ../../install_steps_interactive.pm_.c:963
msgid "(may cause data corruption)"
msgstr "(voi korruptoida tietoja)"

#: ../../install_steps_interactive.pm_.c:963
msgid "Use hard drive optimisations?"
msgstr "K�yt� kiintolevyn optimointeja?"

#: ../../install_steps_interactive.pm_.c:964 ../../standalone/draksec_.c:46
msgid "Choose security level"
msgstr "Valitse turvataso"

#: ../../install_steps_interactive.pm_.c:965
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Tarkka muistin koko, jos tarpeen (l�ydettiin %d Mt)"

#: ../../install_steps_interactive.pm_.c:967
msgid "Removable media automounting"
msgstr "Poistettavien medioiden automaattinen liitt�minen"

#: ../../install_steps_interactive.pm_.c:969
msgid "Clean /tmp at each boot"
msgstr "Tyhjenn� /tmp jokaisessa k�ynnistyksess�"

#: ../../install_steps_interactive.pm_.c:972
msgid "Enable multi profiles"
msgstr "K�yt� montaa profiilia"

#: ../../install_steps_interactive.pm_.c:974
msgid "Enable num lock at startup"
msgstr "Num lock p��ll� k�ynistett�ess�"

#: ../../install_steps_interactive.pm_.c:977
msgid "Give the ram size in MB"
msgstr "Anna muistin koko megatavuina"

#: ../../install_steps_interactive.pm_.c:979
msgid "Can't use supermount in high security level"
msgstr "Supermount ohjelmaa ei voida k�ytt�� korkealla turvatasolla"

#: ../../install_steps_interactive.pm_.c:981
msgid ""
"beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
"If you want to be root, you have to login as a user and then use \"su\".\n"
"More generally, do not expect to use your machine for anything but as a "
"server.\n"
"You have been warned."
msgstr ""

#: ../../install_steps_interactive.pm_.c:986
msgid ""
"Be carefull, having numlock enabled causes a lot of keystrokes to\n"
"give digits instead of normal letters (eg: pressing `p' gives `6')"
msgstr ""

#: ../../install_steps_interactive.pm_.c:1032
msgid "Do you want to generate an auto install floppy for linux replication?"
msgstr ""

# mat
#: ../../install_steps_interactive.pm_.c:1034
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "Aseta tyhj� levyke levyasemaan %s"

#: ../../install_steps_interactive.pm_.c:1049
#: ../../install_steps_interactive.pm_.c:1079
msgid "Creating auto install floppy"
msgstr "Valmistelen automaattiasennuslevykett�"

#: ../../install_steps_interactive.pm_.c:1104
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"Joitain vaiheita ei ole saatettu loppuun.\n"
"\n"
"Haluatko todella lopettaa?"

#: ../../install_steps_interactive.pm_.c:1113
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"For information on fixes which are available for this release of "
"Linux-Mandrake,\n"
"consult the Errata available from http://www.linux-mandrake.com/.\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Linux-Mandrake User's Guide."
msgstr ""
"Onnittelut, asennus on valmis.\n"
"Poista levyke asemasta ja paina Enter, k�ynnist��ksesi koneen uudelleen.\n"
"\n"
"L�yd�t tietoja korjauksista Linux-Mandrakeen, jotka ovat saatavana t�h�n\n"
"versioon, virhelistasta osoitteesta http://www.linux-mandrake.com.\n"
"\n"
"J�rjestelm�n asetuksista on tietoja virallisen Linux Mandraken oppaan\n"
"luvussa \"Asennuksen j�lkeinen konfigurointi\""

#: ../../install_steps_newt.pm_.c:22
#, c-format
msgid "Linux-Mandrake Installation %s"
msgstr "Linux-Mandrake Asennus %s"

#: ../../install_steps_newt.pm_.c:33
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""
"  <Tab>/<Alt-Tab> vaihtaa elementti�  | <Space> valitsee | <F12> seuraava "

#: ../../interactive.pm_.c:273
msgid "Please wait"
msgstr "Odota hetki"

#: ../../interactive_stdio.pm_.c:35
#, c-format
msgid "Ambiguity (%s), be more precise\n"
msgstr "Ep�tarkka (%s), ole tarkempi\n"

#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
#: ../../interactive_stdio.pm_.c:71
msgid "Bad choice, try again\n"
msgstr "Huono valinta, yrit� uudelleen\n"

#: ../../interactive_stdio.pm_.c:39
#, c-format
msgid " ? (default %s) "
msgstr " ? (oletus %s) "

#: ../../interactive_stdio.pm_.c:52
#, c-format
msgid "Your choice? (default %s) "
msgstr "Valintasi? (oletus %s) "

#: ../../interactive_stdio.pm_.c:72
#, c-format
msgid "Your choice? (default %s  enter `none' for none) "
msgstr "Valintasi? (oletus %s anna `ei mik��n' jos et halua mit��n) "

#: ../../keyboard.pm_.c:105 ../../keyboard.pm_.c:135
msgid "Czech (QWERTZ)"
msgstr "T�ekki (QWERTZ)"

#: ../../keyboard.pm_.c:106 ../../keyboard.pm_.c:119 ../../keyboard.pm_.c:138
msgid "German"
msgstr "Saksa"

#: ../../keyboard.pm_.c:107
msgid "Dvorak"
msgstr "Dvorak"

#: ../../keyboard.pm_.c:108 ../../keyboard.pm_.c:144
msgid "Spanish"
msgstr "Espanja"

#: ../../keyboard.pm_.c:109 ../../keyboard.pm_.c:145
msgid "Finnish"
msgstr "Suomi"

#: ../../keyboard.pm_.c:110 ../../keyboard.pm_.c:120 ../../keyboard.pm_.c:146
msgid "French"
msgstr "Ranska"

#: ../../keyboard.pm_.c:111 ../../keyboard.pm_.c:166
msgid "Norwegian"
msgstr "Norja"

#: ../../keyboard.pm_.c:112
msgid "Polish"
msgstr "Puola"

#: ../../keyboard.pm_.c:113 ../../keyboard.pm_.c:171
msgid "Russian"
msgstr "Ven�j�"

#: ../../keyboard.pm_.c:114 ../../keyboard.pm_.c:182
msgid "UK keyboard"
msgstr "UK n�pp�imist�"

#: ../../keyboard.pm_.c:115 ../../keyboard.pm_.c:118 ../../keyboard.pm_.c:183
msgid "US keyboard"
msgstr "US n�pp�imist�"

#: ../../keyboard.pm_.c:122
msgid "Armenian (old)"
msgstr "Armeenia (vanha)"

#: ../../keyboard.pm_.c:123
msgid "Armenian (typewriter)"
msgstr "Armeenia (kirjoituskone)"

#: ../../keyboard.pm_.c:124
msgid "Armenian (phonetic)"
msgstr "Armeenia (foneettinen)"

#: ../../keyboard.pm_.c:127
msgid "Azerbaidjani (latin)"
msgstr ""

#: ../../keyboard.pm_.c:128
msgid "Azerbaidjani (cyrillic)"
msgstr ""

#: ../../keyboard.pm_.c:129
msgid "Belgian"
msgstr "Belgia"

#: ../../keyboard.pm_.c:130
msgid "Bulgarian"
msgstr "Bulgaria"

#: ../../keyboard.pm_.c:131
msgid "Brazilian (ABNT-2)"
msgstr "Brasilia"

#: ../../keyboard.pm_.c:132
#, fuzzy
msgid "Belarusian"
msgstr "Bulgaria"

#: ../../keyboard.pm_.c:133
msgid "Swiss (German layout)"
msgstr "Sveitsi (Saksalainen j�rjestys)"

#: ../../keyboard.pm_.c:134
msgid "Swiss (French layout)"
msgstr "Sveitsi (Ranskalainen j�rjestys)"

#: ../../keyboard.pm_.c:136
msgid "Czech (QWERTY)"
msgstr "T�ekki (QWERTY)"

#: ../../keyboard.pm_.c:137
msgid "Czech (Programmers)"
msgstr ""

#: ../../keyboard.pm_.c:139
msgid "German (no dead keys)"
msgstr "Saksa (ei kuolleita n�pp�imi�)"

#: ../../keyboard.pm_.c:140
msgid "Danish"
msgstr "Tanska"

#: ../../keyboard.pm_.c:141
#, fuzzy
msgid "Dvorak (US)"
msgstr "Dvorak"

#: ../../keyboard.pm_.c:142
#, fuzzy
msgid "Dvorak (Norwegian)"
msgstr "Norja"

#: ../../keyboard.pm_.c:143
msgid "Estonian"
msgstr "Eesti"

#: ../../keyboard.pm_.c:147
msgid "Georgian (\"Russian\" layout)"
msgstr "Georgia (\"Ven�l�inen\"-j�rjestys)"

#: ../../keyboard.pm_.c:148
msgid "Georgian (\"Latin\" layout)"
msgstr "Georgia (\"Latin\"-j�rjestys)"

#: ../../keyboard.pm_.c:149
msgid "Greek"
msgstr "Kreikka"

#: ../../keyboard.pm_.c:150
msgid "Hungarian"
msgstr "Unkari"

#: ../../keyboard.pm_.c:151
msgid "Croatian"
msgstr "Kroatia"

#: ../../keyboard.pm_.c:152
msgid "Israeli"
msgstr "Israeli"

#: ../../keyboard.pm_.c:153
msgid "Israeli (Phonetic)"
msgstr "Israeli (Foneettinen)"

#: ../../keyboard.pm_.c:154
#, fuzzy
msgid "Iranian"
msgstr "Ukraina"

#: ../../keyboard.pm_.c:155
msgid "Icelandic"
msgstr "Islanti"

#: ../../keyboard.pm_.c:156
msgid "Italian"
msgstr "Italia"

#: ../../keyboard.pm_.c:157
msgid "Japanese 106 keys"
msgstr ""

#: ../../keyboard.pm_.c:158
msgid "Latin American"
msgstr "Latinalainen amerikka"

#: ../../keyboard.pm_.c:160
msgid "Dutch"
msgstr "Hollanti"

#: ../../keyboard.pm_.c:161
#, fuzzy
msgid "Lithuanian AZERTY (old)"
msgstr "Liettua AZERTY"

#: ../../keyboard.pm_.c:163
#, fuzzy
msgid "Lithuanian AZERTY (new)"
msgstr "Liettua AZERTY"

#: ../../keyboard.pm_.c:164
msgid "Lithuanian \"number row\" QWERTY"
msgstr "Liettua \"numerorivi\" QWERTY"

#: ../../keyboard.pm_.c:165
msgid "Lithuanian \"phonetic\" QWERTY"
msgstr "Liettua \"foneettinen\" QWERTY"

#: ../../keyboard.pm_.c:167
msgid "Polish (qwerty layout)"
msgstr "Puola (qwerty j�rjestys)"

#: ../../keyboard.pm_.c:168
msgid "Polish (qwertz layout)"
msgstr "Puola (qwertz j�rjestys)"

#: ../../keyboard.pm_.c:169
msgid "Portuguese"
msgstr "Portugal"

#: ../../keyboard.pm_.c:170
msgid "Canadian (Quebec)"
msgstr "Kanada (Quebec)"

#: ../../keyboard.pm_.c:172
msgid "Russian (Yawerty)"
msgstr "Ven�j� (Yawerty)"

#: ../../keyboard.pm_.c:173
msgid "Swedish"
msgstr "Ruotsi"

#: ../../keyboard.pm_.c:174
msgid "Slovenian"
msgstr "Slovenia"

#: ../../keyboard.pm_.c:175
msgid "Slovakian (QWERTZ)"
msgstr "Slovakia (QWERTZ)"

#: ../../keyboard.pm_.c:176
msgid "Slovakian (QWERTY)"
msgstr "Slovakia (QWERTY)"

#: ../../keyboard.pm_.c:177
msgid "Slovakian (Programmers)"
msgstr ""

#: ../../keyboard.pm_.c:178
msgid "Thai keyboard"
msgstr "Thai-n�pp�imist�"

#: ../../keyboard.pm_.c:179
msgid "Turkish (traditional \"F\" model)"
msgstr "Turkki (perinteinen \"F\"-malli)"

#: ../../keyboard.pm_.c:180
msgid "Turkish (modern \"Q\" model)"
msgstr "Turkki (perinteinen \"Q\"-malli)"

#: ../../keyboard.pm_.c:181
msgid "Ukrainian"
msgstr "Ukraina"

#: ../../keyboard.pm_.c:184
msgid "US keyboard (international)"
msgstr "US n�pp�imist� (kansainv�linen)"

#: ../../keyboard.pm_.c:185
#, fuzzy
msgid "Vietnamese \"numeric row\" QWERTY"
msgstr "Liettua \"numerorivi\" QWERTY"

#: ../../keyboard.pm_.c:186
msgid "Yugoslavian (latin layout)"
msgstr "Jugoslavia (latin-j�rjestys)"

#: ../../mouse.pm_.c:25
msgid "Sun - Mouse"
msgstr "Sun - Hiiri"

#: ../../mouse.pm_.c:31
msgid "Standard"
msgstr ""

#: ../../mouse.pm_.c:32
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: ../../mouse.pm_.c:33
#, fuzzy
msgid "Generic PS2 Wheel Mouse"
msgstr "Yleinen hiiri"

#: ../../mouse.pm_.c:34
msgid "GlidePoint"
msgstr "GlidePoint"

#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:61
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:57
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: ../../mouse.pm_.c:38
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: ../../mouse.pm_.c:43
msgid "Generic"
msgstr "Yleinen"

#: ../../mouse.pm_.c:44
#, fuzzy
msgid "Wheel"
msgstr "taso"

#: ../../mouse.pm_.c:47
msgid "serial"
msgstr "sarja"

#: ../../mouse.pm_.c:49
msgid "Generic 2 Button Mouse"
msgstr "Yleinen 2-nappinen hiiri"

#: ../../mouse.pm_.c:50
msgid "Generic 3 Button Mouse"
msgstr "Yleinen 3-nappinen hiiri"

#: ../../mouse.pm_.c:51
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: ../../mouse.pm_.c:52
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: ../../mouse.pm_.c:53
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: ../../mouse.pm_.c:55
msgid "Logitech CC Series"
msgstr "Logitech CC Series"

#: ../../mouse.pm_.c:56
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: ../../mouse.pm_.c:58
msgid "MM Series"
msgstr "MM Series"

#: ../../mouse.pm_.c:59
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: ../../mouse.pm_.c:60
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Logitech Mouse (sarja, vanha C7 tyyppi)"

#: ../../mouse.pm_.c:64
#, fuzzy
msgid "busmouse"
msgstr "Ei hiirt�"

#: ../../mouse.pm_.c:66
msgid "2 buttons"
msgstr ""

#: ../../mouse.pm_.c:67
msgid "3 buttons"
msgstr ""

#: ../../mouse.pm_.c:70
msgid "none"
msgstr "ei mik��n"

#: ../../mouse.pm_.c:72
msgid "No mouse"
msgstr "Ei hiirt�"

#: ../../my_gtk.pm_.c:243
msgid "Next ->"
msgstr ""

#: ../../my_gtk.pm_.c:486
msgid "Is this correct?"
msgstr "Onko t�m� oikein?"

#: ../../netconnect.pm_.c:93 ../../netconnect_new.pm_.c:151
#, fuzzy
msgid "Internet configuration"
msgstr "V�lityspalvelimien asetus"

#: ../../netconnect.pm_.c:94 ../../netconnect_new.pm_.c:152
#, fuzzy
msgid "Do you want to try to connect to the Internet now?"
msgstr "Haluatko kokeilla asetuksia?"

#: ../../netconnect.pm_.c:101 ../../netconnect_new.pm_.c:159
#, fuzzy
msgid "Testing your connection..."
msgstr "Aseta verkko"

#: ../../netconnect.pm_.c:106 ../../netconnect_new.pm_.c:164
#, fuzzy
msgid "The system is now connected to Internet."
msgstr "�l� aseta verkkoa"

#: ../../netconnect.pm_.c:107 ../../netconnect_new.pm_.c:165
#, fuzzy
msgid ""
"The system doesn't seem to be connected to internet.\n"
"Try to reconfigure your connection."
msgstr "Yhteyden nimi"

#: ../../netconnect.pm_.c:141 ../../netconnect.pm_.c:213
#: ../../netconnect.pm_.c:232 ../../netconnect.pm_.c:244
#: ../../netconnect.pm_.c:256 ../../netconnect_new.pm_.c:226
#: ../../netconnect_new.pm_.c:300 ../../netconnect_new.pm_.c:319
#: ../../netconnect_new.pm_.c:331 ../../netconnect_new.pm_.c:343
#, fuzzy
msgid "ISDN Configuration"
msgstr "Asetukset"

#: ../../netconnect.pm_.c:141 ../../netconnect_new.pm_.c:226
msgid ""
"Select your provider.\n"
" If it's not in the list, choose Unlisted"
msgstr ""

#: ../../netconnect.pm_.c:158 ../../netconnect_new.pm_.c:245
#, fuzzy
msgid "Connection Configuration"
msgstr "V�lityspalvelimien asetus"

#: ../../netconnect.pm_.c:159 ../../netconnect_new.pm_.c:246
msgid "Please fill or check the field below"
msgstr ""

#: ../../netconnect.pm_.c:161 ../../netconnect_new.pm_.c:248
msgid "Card IRQ"
msgstr ""

#: ../../netconnect.pm_.c:162 ../../netconnect_new.pm_.c:249
msgid "Card mem (DMA)"
msgstr ""

#: ../../netconnect.pm_.c:163 ../../netconnect_new.pm_.c:250
msgid "Card IO"
msgstr ""

#: ../../netconnect.pm_.c:164 ../../netconnect_new.pm_.c:251
msgid "Card IO_0"
msgstr ""

#: ../../netconnect.pm_.c:165 ../../netconnect_new.pm_.c:252
msgid "Card IO_1"
msgstr ""

#: ../../netconnect.pm_.c:166 ../../netconnect_new.pm_.c:253
msgid "Your personal phone number"
msgstr ""

#: ../../netconnect.pm_.c:168 ../../netconnect_new.pm_.c:255
msgid "Provider name (ex provider.net)"
msgstr ""

#: ../../netconnect.pm_.c:169 ../../netconnect_new.pm_.c:256
#, fuzzy
msgid "Provider phone number"
msgstr "Puhelinnumero"

#: ../../netconnect.pm_.c:170 ../../netconnect_new.pm_.c:257
msgid "Provider dns 1"
msgstr ""

#: ../../netconnect.pm_.c:171 ../../netconnect_new.pm_.c:258
msgid "Provider dns 2"
msgstr ""

#: ../../netconnect.pm_.c:172 ../../netconnect_new.pm_.c:259
#, fuzzy
msgid "Dialing mode"
msgstr "Verkkoalue"

#: ../../netconnect.pm_.c:174 ../../netconnect_new.pm_.c:261
#, fuzzy
msgid "Account Login (user name)"
msgstr "Liitospaikka"

#: ../../netconnect.pm_.c:175 ../../netconnect_new.pm_.c:262
#, fuzzy
msgid "Account Password"
msgstr "Salasana"

#: ../../netconnect.pm_.c:176 ../../netconnect_new.pm_.c:263
#, fuzzy
msgid "Confirm Password"
msgstr "Salasana"

#: ../../netconnect.pm_.c:208 ../../netconnect_new.pm_.c:295
msgid "Europe"
msgstr ""

#: ../../netconnect.pm_.c:208 ../../netconnect_new.pm_.c:295
msgid "Europe (EDSS1)"
msgstr ""

#: ../../netconnect.pm_.c:210 ../../netconnect_new.pm_.c:297
#, fuzzy
msgid "Rest of the world"
msgstr "Kokeile asetuksia"

#: ../../netconnect.pm_.c:210 ../../netconnect_new.pm_.c:297
msgid "Rest of the world - no D-Channel (leased lines)"
msgstr ""

#: ../../netconnect.pm_.c:214 ../../netconnect_new.pm_.c:301
#, fuzzy
msgid "Which protocol do you want to use ?"
msgstr "Mink� osiotyypin haluat?"

#: ../../netconnect.pm_.c:224 ../../netconnect_new.pm_.c:311
#, fuzzy
msgid "ISA / PCMCIA"
msgstr "PCMCIA"

#: ../../netconnect.pm_.c:226 ../../netconnect_new.pm_.c:313
#, fuzzy
msgid "PCI"
msgstr "PCMCIA"

#: ../../netconnect.pm_.c:228 ../../netconnect_new.pm_.c:315
msgid "I don't know"
msgstr ""

#: ../../netconnect.pm_.c:233 ../../netconnect_new.pm_.c:320
#, fuzzy
msgid "What kind of card do you have?"
msgstr "Millainen kirjoitin sinulla on?"

#: ../../netconnect.pm_.c:239 ../../netconnect_new.pm_.c:326
#, fuzzy
msgid "Continue"
msgstr "Jatka kuitenkin?"

#: ../../netconnect.pm_.c:241 ../../netconnect_new.pm_.c:328
msgid "Abort"
msgstr ""

#: ../../netconnect.pm_.c:245 ../../netconnect_new.pm_.c:332
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
msgstr ""

#: ../../netconnect.pm_.c:257 ../../netconnect_new.pm_.c:344
#, fuzzy
msgid "Which is your ISDN card ?"
msgstr "Mik� on aikavy�hykkeesi?"

#: ../../netconnect.pm_.c:282
msgid "I have found an ISDN Card:\n"
msgstr ""

#: ../../netconnect.pm_.c:288 ../../netconnect_new.pm_.c:367
msgid ""
"I have detected an ISDN PCI Card, but I don't know the type. Please select "
"one PCI card on the next screen."
msgstr ""

#: ../../netconnect.pm_.c:300 ../../netconnect_new.pm_.c:379
msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr ""

#: ../../netconnect.pm_.c:336 ../../netconnect_new.pm_.c:412
msgid ""
"No ethernet network adapter has been detected on your system.\n"
"I cannot set up this connection type."
msgstr ""

#: ../../netconnect.pm_.c:340 ../../netconnect_new.pm_.c:417
#: ../../standalone/drakgw_.c:222
#, fuzzy
msgid "Choose the network interface"
msgstr "Valitse uusi koko"

#: ../../netconnect.pm_.c:341 ../../netconnect_new.pm_.c:418
#, fuzzy
msgid ""
"Please choose which network adapter you want to use to connect to Internet"
msgstr "Mihin sarjaporttiin hiiresi on liitetty."

#: ../../netconnect.pm_.c:356 ../../netconnect.pm_.c:635
#: ../../netconnect.pm_.c:766 ../../netconnect_new.pm_.c:425
#: ../../netconnect_new.pm_.c:777 ../../netconnect_new.pm_.c:908
#: ../../standalone/drakgw_.c:217
msgid "Network interface"
msgstr ""

#: ../../netconnect.pm_.c:357 ../../netconnect_new.pm_.c:426
msgid ""
"\n"
"Do you agree?"
msgstr ""

#: ../../netconnect.pm_.c:357 ../../netconnect_new.pm_.c:426
#, fuzzy
msgid "I'm about to restart the network device:\n"
msgstr "Haluatko kokeilla asetuksia?"

#: ../../netconnect.pm_.c:473 ../../netconnect_new.pm_.c:512
#, fuzzy
msgid "ADSL configuration"
msgstr "Asetukset"

#: ../../netconnect.pm_.c:474 ../../netconnect_new.pm_.c:513
#, fuzzy
msgid "Do you want to start your connection at boot?"
msgstr "Haluatko k�ytt�� aboot:a?"

#: ../../netconnect.pm_.c:541 ../../netconnect_new.pm_.c:672
msgid "Try to find a modem?"
msgstr "Yrit� etsi� modeemia?"

#: ../../netconnect.pm_.c:551 ../../netconnect_new.pm_.c:677
msgid "Please choose which serial port your modem is connected to."
msgstr "Mihin sarjaporttiin modeemisi on kytketty."

#: ../../netconnect.pm_.c:556 ../../netconnect_new.pm_.c:682
msgid "Dialup options"
msgstr "Soittoasetukset"

#: ../../netconnect.pm_.c:557 ../../netconnect_new.pm_.c:683
msgid "Connection name"
msgstr "Yhteyden nimi"

#: ../../netconnect.pm_.c:558 ../../netconnect_new.pm_.c:684
#, fuzzy
msgid "Phone number"
msgstr "Puhelinnumero"

#: ../../netconnect.pm_.c:559 ../../netconnect_new.pm_.c:685
msgid "Login ID"
msgstr "K�ytt�j� ID"

#: ../../netconnect.pm_.c:561 ../../netconnect_new.pm_.c:687
msgid "Authentication"
msgstr "Tunnistustapa"

#: ../../netconnect.pm_.c:561 ../../netconnect_new.pm_.c:687
msgid "PAP"
msgstr "PAP"

#: ../../netconnect.pm_.c:561 ../../netconnect_new.pm_.c:687
msgid "Script-based"
msgstr "Script-pohjainen"

#: ../../netconnect.pm_.c:561 ../../netconnect_new.pm_.c:687
msgid "Terminal-based"
msgstr "Terminaalipohjainen"

#: ../../netconnect.pm_.c:562 ../../netconnect_new.pm_.c:688
#, fuzzy
msgid "Domain name"
msgstr "Yhteyden nimi"

#: ../../netconnect.pm_.c:564 ../../netconnect_new.pm_.c:690
msgid "First DNS Server"
msgstr "Ensimm�inen nimipalvelin"

#: ../../netconnect.pm_.c:565 ../../netconnect_new.pm_.c:691
msgid "Second DNS Server"
msgstr "Toinen nimipalvelin"

#: ../../netconnect.pm_.c:594 ../../netconnect_new.pm_.c:736
#, fuzzy
msgid ""
"\n"
"You can connect to Internet or reconfigure your connection."
msgstr "Yhteyden nimi"

#: ../../netconnect.pm_.c:594 ../../netconnect.pm_.c:598
#: ../../netconnect_new.pm_.c:736 ../../netconnect_new.pm_.c:740
#, fuzzy
msgid ""
"\n"
"You can reconfigure your connection."
msgstr "Aseta verkko"

#: ../../netconnect.pm_.c:594 ../../netconnect_new.pm_.c:736
#, fuzzy
msgid "You are not currently connected to Internet."
msgstr "�l� aseta verkkoa"

#: ../../netconnect.pm_.c:598 ../../netconnect_new.pm_.c:740
msgid ""
"\n"
"You can disconnect or reconfigure your connection."
msgstr ""

#: ../../netconnect.pm_.c:598 ../../netconnect_new.pm_.c:740
#, fuzzy
msgid "You are currently connected to internet."
msgstr "�l� aseta verkkoa"

#: ../../netconnect.pm_.c:602 ../../netconnect_new.pm_.c:744
#, fuzzy
msgid "Connect to Internet"
msgstr "Yhteyden nimi"

#: ../../netconnect.pm_.c:604 ../../netconnect_new.pm_.c:746
#, fuzzy
msgid "Disconnect from Internet"
msgstr "Yhteyden nimi"

#: ../../netconnect.pm_.c:606 ../../netconnect_new.pm_.c:748
#, fuzzy
msgid "Configure network connection (LAN or Internet)"
msgstr "Aseta verkko"

#: ../../netconnect.pm_.c:609 ../../netconnect_new.pm_.c:751
#, fuzzy
msgid "Internet connection & configuration"
msgstr "Kirjoitinyhteys"

#: ../../netconnect.pm_.c:636 ../../netconnect.pm_.c:767
#: ../../netconnect_new.pm_.c:778 ../../netconnect_new.pm_.c:909
msgid ""
"I'm about to restart the network device $netc->{NET_DEVICE}. Do you agree?"
msgstr ""

#: ../../netconnect.pm_.c:653 ../../netconnect_new.pm_.c:795
#, fuzzy
msgid "Configure a normal modem connection"
msgstr "Aseta verkko"

#: ../../netconnect.pm_.c:673 ../../netconnect_new.pm_.c:815
#, fuzzy
msgid "Configure an ISDN connection"
msgstr "Aseta verkko"

#: ../../netconnect.pm_.c:678 ../../netconnect_new.pm_.c:820
msgid "Internal ISDN card"
msgstr ""

#: ../../netconnect.pm_.c:680 ../../netconnect_new.pm_.c:822
#, fuzzy
msgid "External ISDN modem"
msgstr "Ekspertti"

#: ../../netconnect.pm_.c:683 ../../netconnect.pm_.c:717
#: ../../netconnect.pm_.c:729 ../../netconnect.pm_.c:753
#: ../../netconnect.pm_.c:798 ../../netconnect_new.pm_.c:825
#: ../../netconnect_new.pm_.c:859 ../../netconnect_new.pm_.c:871
#: ../../netconnect_new.pm_.c:895 ../../netconnect_new.pm_.c:940
#, fuzzy
msgid "Connect to the Internet"
msgstr "Yhteyden nimi"

#: ../../netconnect.pm_.c:684 ../../netconnect_new.pm_.c:826
#, fuzzy
msgid "What kind is your ISDN connection?"
msgstr "Mihin sarjaporttiin hiiresi on liitetty?"

#: ../../netconnect.pm_.c:703 ../../netconnect_new.pm_.c:845
#, fuzzy
msgid "Configure a DSL (or ADSL) connection"
msgstr "Aseta verkko"

#: ../../netconnect.pm_.c:712 ../../netconnect_new.pm_.c:854
#, fuzzy
msgid "France"
msgstr "Peruuta"

#: ../../netconnect.pm_.c:714 ../../netconnect_new.pm_.c:856
msgid "Other countries"
msgstr ""

#: ../../netconnect.pm_.c:718 ../../netconnect_new.pm_.c:860
msgid "In which country are you located ?"
msgstr ""

#: ../../netconnect.pm_.c:724 ../../netconnect_new.pm_.c:866
msgid "Alcatel modem"
msgstr ""

#: ../../netconnect.pm_.c:726 ../../netconnect_new.pm_.c:868
#, fuzzy
msgid "ECI modem"
msgstr "Ekspertti"

#: ../../netconnect.pm_.c:730 ../../netconnect_new.pm_.c:872
msgid "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
msgstr ""

#: ../../netconnect.pm_.c:748 ../../netconnect_new.pm_.c:890
msgid "use pppoe"
msgstr ""

#: ../../netconnect.pm_.c:750 ../../netconnect_new.pm_.c:892
msgid "don't use pppoe"
msgstr ""

#: ../../netconnect.pm_.c:754 ../../netconnect_new.pm_.c:896
msgid ""
"The most common way to connect with adsl is dhcp + pppoe.\n"
"However, some connections only use dhcp.\n"
"If you don't know, choose 'use pppoe'"
msgstr ""

#: ../../netconnect.pm_.c:777 ../../netconnect_new.pm_.c:919
#, fuzzy
msgid "Configure a cable connection"
msgstr "Aseta verkko"

#: ../../netconnect.pm_.c:799 ../../netconnect_new.pm_.c:941
#, fuzzy
msgid ""
"Which dhcp client do you want to use?\n"
"Default is dhcpd"
msgstr "Mink� osiotyypin haluat?"

#: ../../netconnect.pm_.c:812 ../../netconnect_new.pm_.c:954
#, fuzzy
msgid "Disable Internet Connection"
msgstr "Aseta verkko"

#: ../../netconnect.pm_.c:823 ../../netconnect_new.pm_.c:965
#, fuzzy
msgid "Configure local network"
msgstr "Aseta verkko"

#: ../../netconnect.pm_.c:827 ../../netconnect_new.pm_.c:969
#, fuzzy
msgid "Network configuration"
msgstr "Verkon asetukset"

#: ../../netconnect.pm_.c:828 ../../netconnect_new.pm_.c:970
#, fuzzy
msgid "Do you want to restart the network"
msgstr "Haluatko kokeilla asetuksia?"

#: ../../netconnect.pm_.c:836 ../../netconnect_new.pm_.c:978
#, fuzzy
msgid "Disable networking"
msgstr "Aseta verkko"

#: ../../netconnect.pm_.c:846 ../../netconnect_new.pm_.c:988
#, fuzzy
msgid "Configure the Internet connection / Configure local Network"
msgstr "Yhteyden nimi"

#: ../../netconnect.pm_.c:847 ../../netconnect_new.pm_.c:989
#, fuzzy
msgid ""
"Local networking has already been configured.\n"
"Do you want to:"
msgstr "L�hiverkko on jo asetettu. Haluatko:"

#: ../../netconnect.pm_.c:848 ../../netconnect_new.pm_.c:990
#, fuzzy
msgid "How do you want to connect to the Internet?"
msgstr "Mille levylle haluat siirt��?"

#: ../../netconnect.pm_.c:870 ../../netconnect_new.pm_.c:1012
msgid "Network Configuration"
msgstr "Verkon asetukset"

#: ../../netconnect.pm_.c:871 ../../netconnect_new.pm_.c:1013
msgid ""
"Now that your Internet connection is configured,\n"
"your computer can be configured to share its Internet connection.\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN).\n"
"\n"
"Would you like to setup the Internet Connection Sharing?\n"
msgstr ""

#: ../../network.pm_.c:253
msgid "no network card found"
msgstr "verkkokorttia ei l�ytynyt"

#: ../../network.pm_.c:273 ../../network.pm_.c:340
msgid "Configuring network"
msgstr "Asetan verkkoa"

#: ../../network.pm_.c:274
#, fuzzy
msgid ""
"Please enter your host name if you know it.\n"
"Some DHCP servers require the hostname to work.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''."
msgstr ""
"Sy�t� koneesi nimi.\n"
"Koneesi nimen pit�isi olla t�ydellinen, kuten ``minunkone.yritys.fi''.\n"
"Voit antaa my�s yhdysk�yt�v�n IP.osoitten jos sinulla on sellainen."

#: ../../network.pm_.c:278 ../../network.pm_.c:345
#, fuzzy
msgid "Host name"
msgstr "Koneen nimi:"

#: ../../network.pm_.c:297
msgid ""
"WARNING: This device has been previously configured to connect to the "
"Internet.\n"
"Simply press OK to keep this device configured.\n"
"Modifying the fields below will override this configuration."
msgstr ""

#: ../../network.pm_.c:302
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"Anna koneen IP-asetukset. Kukin kohta tulee sy�tt�� IP-osoitteena,\n"
"pisteill� eroteltuna nelinumeroisena lukuna (esim. 1.2.3.4)."

#: ../../network.pm_.c:311 ../../network.pm_.c:312
#, c-format
msgid "Configuring network device %s"
msgstr "Asetan verkkolaitetta %s"

#: ../../network.pm_.c:314
msgid "Automatic IP"
msgstr "Automaattinen IP"

#: ../../network.pm_.c:314
#, fuzzy
msgid "IP address"
msgstr "IP-osoite:"

#: ../../network.pm_.c:314
#, fuzzy
msgid "Netmask"
msgstr "Verkkopeite:"

#: ../../network.pm_.c:315
msgid "(bootp/dhcp)"
msgstr "(bootp/dhcp)"

#: ../../network.pm_.c:321 ../../printerdrake.pm_.c:98
#: ../../printerdrake.pm_.c:420
msgid "IP address should be in format 1.2.3.4"
msgstr "IP-osoitteen tullee olla muotoa 1.2.3.4"

#: ../../network.pm_.c:341
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one"
msgstr ""
"Sy�t� koneesi nimi.\n"
"Koneesi nimen pit�isi olla t�ydellinen, kuten ``minunkone.yritys.fi''.\n"
"Voit antaa my�s yhdysk�yt�v�n IP.osoitten jos sinulla on sellainen."

#: ../../network.pm_.c:346
#, fuzzy
msgid "DNS server"
msgstr "Nimipalvelin:"

#: ../../network.pm_.c:347
#, fuzzy
msgid "Gateway"
msgstr "Yhdysk�yt�v�:"

#: ../../network.pm_.c:348
#, fuzzy
msgid "Gateway device"
msgstr "Yhdysk�yt�v�n laite:"

#: ../../network.pm_.c:358
#, fuzzy
msgid "Proxies configuration"
msgstr "Asennuksen j�lkeiset toiminnot"

#: ../../network.pm_.c:359
msgid "HTTP proxy"
msgstr "HTTP-v�lityspalvelin:"

#: ../../network.pm_.c:360
msgid "FTP proxy"
msgstr "FTP-v�lityspalvelin:"

#: ../../network.pm_.c:366
msgid "Proxy should be http://..."
msgstr "V�lityspalvelimen tulee olla muotoa http://..."

#: ../../network.pm_.c:367
msgid "Proxy should be ftp://..."
msgstr "V�lityspalvelimen tulee olla muotoa ftp://..."

#: ../../partition_table.pm_.c:540
msgid "Extended partition not supported on this platform"
msgstr ""

#: ../../partition_table.pm_.c:558
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions"
msgstr ""
"Sinulla on reik� osiotaulussasi eik� sit� voida k�ytt��.\n"
"Ainoa ratkaisu on siirt�� prim��riosioita siten ett� reik� on ennen "
"laajennettuja osioita"

#: ../../partition_table.pm_.c:651
#, c-format
msgid "Error reading file %s"
msgstr "Virhe lukiessa tiedostoa %s"

#: ../../partition_table.pm_.c:658
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Palautus tiedostosta %s ep�onnistui: %s"

#: ../../partition_table.pm_.c:660
msgid "Bad backup file"
msgstr "Huono varmuuskopiotiedosto"

#: ../../partition_table.pm_.c:681
#, c-format
msgid "Error writing to file %s"
msgstr "Virhe kirjoitettaessa tiedostoon %s"

#: ../../pkgs.pm_.c:20
msgid "mandatory"
msgstr "pakollinen"

#: ../../pkgs.pm_.c:21
msgid "must have"
msgstr "pakko olla"

#: ../../pkgs.pm_.c:22
msgid "important"
msgstr "t�rke�"

#: ../../pkgs.pm_.c:24
msgid "very nice"
msgstr "eritt�in hyv�"

#: ../../pkgs.pm_.c:25
msgid "nice"
msgstr "hyv�"

#: ../../pkgs.pm_.c:26 ../../pkgs.pm_.c:27
msgid "interesting"
msgstr "kiinnostava"

#: ../../pkgs.pm_.c:28 ../../pkgs.pm_.c:29 ../../pkgs.pm_.c:30
#: ../../pkgs.pm_.c:31
msgid "maybe"
msgstr "ehk�"

#: ../../pkgs.pm_.c:34
msgid "i18n (important)"
msgstr "i18n (t�rke�)"

#: ../../pkgs.pm_.c:35
msgid "i18n (very nice)"
msgstr "i18n (hyv�)"

#: ../../pkgs.pm_.c:36
msgid "i18n (nice)"
msgstr "i18n (hyv�)"

#: ../../printer.pm_.c:19
msgid "Local printer"
msgstr "Paikallinen kirjoitin"

#: ../../printer.pm_.c:20
#, fuzzy
msgid "Remote printer"
msgstr "Palvelimen lpd:n tulostinparametrit"

#: ../../printer.pm_.c:21 ../../printerdrake.pm_.c:410
#, fuzzy
msgid "Remote CUPS server"
msgstr "Et�jonon nimi:"

#: ../../printer.pm_.c:22
#, fuzzy
msgid "Remote lpd server"
msgstr "lpd-palvelin"

#: ../../printer.pm_.c:23
#, fuzzy
msgid "Network printer (socket)"
msgstr "NetWare-kirjoittimen parametrit"

#: ../../printer.pm_.c:24
msgid "SMB/Windows 95/98/NT"
msgstr "SMB/Windows 95/98/NT"

#: ../../printer.pm_.c:25
msgid "NetWare"
msgstr "NetWare"

#: ../../printer.pm_.c:26 ../../printerdrake.pm_.c:154
#: ../../printerdrake.pm_.c:156
#, fuzzy
msgid "Printer Device URI"
msgstr "Tulostinlaite"

#: ../../printerdrake.pm_.c:19
msgid "Detecting devices..."
msgstr "Etsin laitteita...."

#: ../../printerdrake.pm_.c:19
msgid "Test ports"
msgstr "Kokeile portteja"

#: ../../printerdrake.pm_.c:35
#, c-format
msgid "A printer, model \"%s\", has been detected on "
msgstr "Tulostin mallia \"%s\" l�ydettiin "

#: ../../printerdrake.pm_.c:48
msgid "Local Printer Device"
msgstr "Paikallinen tulostin"

#: ../../printerdrake.pm_.c:49
msgid ""
"What device is your printer connected to \n"
"(note that /dev/lp0 is equivalent to LPT1:)?\n"
msgstr ""
"Mihin laitteeseen tulostin on kytketty  \n"
"(huomaa, ett� /dev/lp0 vastaa LPT1:t�)?\n"

#: ../../printerdrake.pm_.c:51
msgid "Printer Device"
msgstr "Tulostinlaite"

#: ../../printerdrake.pm_.c:70
msgid "Remote lpd Printer Options"
msgstr "Palvelimen lpd:n tulostinparametrit"

#: ../../printerdrake.pm_.c:71
msgid ""
"To use a remote lpd print queue, you need to supply\n"
"the hostname of the printer server and the queue name\n"
"on that server which jobs should be placed in."
msgstr ""
"Jotta voisit k�ytt�� palvelimen lpd-tulostusjonoja, sinun\n"
"tulee sy�tt�� tulostuspalvelimen ja jonon nimi jolle ty�t\n"
"siirret��n."

#: ../../printerdrake.pm_.c:74
msgid "Remote hostname"
msgstr "Palvelimen nimi"

#: ../../printerdrake.pm_.c:75
msgid "Remote queue"
msgstr "Et�jonon nimi:"

#: ../../printerdrake.pm_.c:84
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "SMB (Windows 9x/NT) -tulostimen parametrit"

#: ../../printerdrake.pm_.c:85
msgid ""
"To print to a SMB printer, you need to provide the\n"
"SMB host name (Note! It may be different from its\n"
"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
"well as the share name for the printer you wish to access and any\n"
"applicable user name, password, and workgroup information."
msgstr ""
"SMB-tulostimelle tulostaaksesi sinun pit�� sy�tt��\n"
"SMB-koneen nimi (joka ei aina ole sama kuin koneen TCP/IP nimi)\n"
"ja mahdollisesti tulostinpalvelimen IP-osoite, kirjoittimen jakonimi\n"
"sek� soveltuva k�ytt�j�tunnus, salasana ja ty�ryhm�-tieto."

#: ../../printerdrake.pm_.c:90
msgid "SMB server host"
msgstr "SMB-palvelimen nimi"

#: ../../printerdrake.pm_.c:91
msgid "SMB server IP"
msgstr "SMB-palvelimen IP"

#: ../../printerdrake.pm_.c:92
msgid "Share name"
msgstr "Jakonimi"

#: ../../printerdrake.pm_.c:95
msgid "Workgroup"
msgstr "Ty�ryhm�"

#: ../../printerdrake.pm_.c:120
msgid "NetWare Printer Options"
msgstr "NetWare-kirjoittimen parametrit"

#: ../../printerdrake.pm_.c:121
msgid ""
"To print to a NetWare printer, you need to provide the\n"
"NetWare print server name (Note! it may be different from its\n"
"TCP/IP hostname!) as well as the print queue name for the printer you\n"
"wish to access and any applicable user name and password."
msgstr ""
"NetWare-tulostimelle tulostaaksesi sinun pit�� sy�tt��\n"
"NetWare-palvelinkoneen nimi (joka ei aina ole sama kuin koneen TCP/IP nimi)\n"
"ja mahdollisesti tulostusjonon nimi sille kirjoittimelle, jota haluat\n"
"k�ytt��, sek� soveltuva k�ytt�j�tunnus ja salasana."

#: ../../printerdrake.pm_.c:125
msgid "Printer Server"
msgstr "Tulostuspalvelin"

#: ../../printerdrake.pm_.c:126
msgid "Print Queue Name"
msgstr "Tulostusjonon nimi"

#: ../../printerdrake.pm_.c:138
#, fuzzy
msgid "Socket Printer Options"
msgstr "NetWare-kirjoittimen parametrit"

#: ../../printerdrake.pm_.c:139
msgid ""
"To print to a socket printer, you need to provide the\n"
"hostname of the printer and optionally the port number."
msgstr ""

#: ../../printerdrake.pm_.c:141
#, fuzzy
msgid "Printer Hostname"
msgstr "Tulostimen asetukset"

#: ../../printerdrake.pm_.c:142 ../../printerdrake.pm_.c:417
#, fuzzy
msgid "Port"
msgstr "Huono"

#: ../../printerdrake.pm_.c:155
msgid "You can specify directly the URI to access the printer with CUPS."
msgstr ""

#: ../../printerdrake.pm_.c:188 ../../printerdrake.pm_.c:240
msgid "What type of printer do you have?"
msgstr "Millainen kirjoitin sinulla on?"

#: ../../printerdrake.pm_.c:200 ../../printerdrake.pm_.c:307
msgid "Do you want to test printing?"
msgstr "Haluatko kokeilla tulostusta?"

#: ../../printerdrake.pm_.c:203 ../../printerdrake.pm_.c:318
msgid "Printing test page(s)..."
msgstr "Tulostan testisivua..."

#: ../../printerdrake.pm_.c:210 ../../printerdrake.pm_.c:326
#, c-format
msgid ""
"Test page(s) have been sent to the printer daemon.\n"
"This may take a little time before printer start.\n"
"Printing status:\n"
"%s\n"
"\n"
"Does it work properly?"
msgstr ""
"Testisivu on l�hetetty tulostinpalvelimelle.\n"
"Voi kest�� hetken ennenkuin tulostus alkaa.\n"
"Tulostustila:\n"
"%s\n"
"\n"
"Toimiko tulostus oikein?"

#: ../../printerdrake.pm_.c:214 ../../printerdrake.pm_.c:330
msgid ""
"Test page(s) have been sent to the printer daemon.\n"
"This may take a little time before printer start.\n"
"Does it work properly?"
msgstr ""
"Testisivu on l�hetetty tulostinpalvelimelle.\n"
"Voi kest�� hetken ennenkuin tulostus alkaa.\n"
"Toimiko tulostus oikein?"

#: ../../printerdrake.pm_.c:230
msgid "Yes, print ASCII test page"
msgstr "Kyll�, tulosta ASCII-testisivu"

#: ../../printerdrake.pm_.c:231
msgid "Yes, print PostScript test page"
msgstr "Kyll�, tulosta PostScript-testisivu"

#: ../../printerdrake.pm_.c:232
msgid "Yes, print both test pages"
msgstr "Kyll�, tulosta molemmat sivut"

#: ../../printerdrake.pm_.c:239
msgid "Configure Printer"
msgstr "Aseta kirjoitin"

#: ../../printerdrake.pm_.c:272
msgid "Printer options"
msgstr "Tulostimen asetukset"

#: ../../printerdrake.pm_.c:273
msgid "Paper Size"
msgstr "Paperikoko"

#: ../../printerdrake.pm_.c:274
msgid "Eject page after job?"
msgstr "Poista sivu ty�n j�lkeen?"

#: ../../printerdrake.pm_.c:279
msgid "Uniprint driver options"
msgstr "Uniprint ajurin asetukset"

#: ../../printerdrake.pm_.c:280
msgid "Color depth options"
msgstr "V�risyvyysasetukset"

#: ../../printerdrake.pm_.c:282
msgid "Print text as PostScript?"
msgstr "Tulosta teksti postscript muodossa?"

#: ../../printerdrake.pm_.c:283
msgid "Reverse page order"
msgstr "K��nteinen sivuj�rjestys"

#: ../../printerdrake.pm_.c:285
msgid "Fix stair-stepping text?"
msgstr "Korjaa askelmainen rivinvaihto?"

#: ../../printerdrake.pm_.c:288
msgid "Number of pages per output pages"
msgstr "Sivujen m��r� tulostettavalla sivulla"

#: ../../printerdrake.pm_.c:289
msgid "Right/Left margins in points (1/72 of inch)"
msgstr "Vasen/Oikea mariginaali pistein� (1/72 tuuma)"

#: ../../printerdrake.pm_.c:290
msgid "Top/Bottom margins in points (1/72 of inch)"
msgstr "Yl�/Ala-mariginaalit pistein� (1/72 tuumina)"

#: ../../printerdrake.pm_.c:293
msgid "Extra GhostScript options"
msgstr "Lis�asetukset GhostScriptille"

#: ../../printerdrake.pm_.c:296
msgid "Extra Text options"
msgstr "Lis�tekstiasetukset"

#: ../../printerdrake.pm_.c:346
msgid "Printer"
msgstr "Tulostin"

#: ../../printerdrake.pm_.c:347
msgid "Would you like to configure a printer?"
msgstr "Haluatko asettaa tulostimen?"

#: ../../printerdrake.pm_.c:350
msgid ""
"Here are the following print queues.\n"
"You can add some more or change the existing ones."
msgstr ""
"T�ss� ovat tulostusjonot.\n"
"Voit lis�t� uusia tai muuttaa olemassaolevia."

#: ../../printerdrake.pm_.c:365
#, fuzzy
msgid "CUPS starting"
msgstr "Arvioin"

#: ../../printerdrake.pm_.c:365
msgid "Reading CUPS drivers database..."
msgstr ""

#: ../../printerdrake.pm_.c:379 ../../printerdrake.pm_.c:444
#: ../../printerdrake.pm_.c:457 ../../printerdrake.pm_.c:464
msgid "Select Printer Connection"
msgstr "Valitse tulostinyhteys"

#: ../../printerdrake.pm_.c:380 ../../printerdrake.pm_.c:458
msgid "How is the printer connected?"
msgstr "Miten tulostin on liitetty?"

#: ../../printerdrake.pm_.c:387
#, fuzzy
msgid "Select Remote Printer Connection"
msgstr "Valitse tulostinyhteys"

#: ../../printerdrake.pm_.c:388
msgid ""
"With a remote CUPS server, you do not have to configure\n"
"any printer here; printers will be automatically detected.\n"
"In case of doubt, select \"Remote CUPS server\"."
msgstr ""

#: ../../printerdrake.pm_.c:411
msgid ""
"With a remote CUPS server, you do not have to configure\n"
"any printer here; printers will be automatically detected\n"
"unless you have a server on a different network; in the\n"
"latter case, you have to give the CUPS server IP address\n"
"and optionally the port number."
msgstr ""

#: ../../printerdrake.pm_.c:416
#, fuzzy
msgid "CUPS server IP"
msgstr "SMB-palvelimen IP"

#: ../../printerdrake.pm_.c:424
msgid "Port number should be numeric"
msgstr ""

#: ../../printerdrake.pm_.c:445 ../../printerdrake.pm_.c:464
msgid "Remove queue"
msgstr "Poista jono"

#: ../../printerdrake.pm_.c:446
#, fuzzy
msgid ""
"Every printer need a name (for example lp).\n"
"Other parameters such as the description of the printer or its location\n"
"can be defined. What name should be used for this printer and\n"
"how is the printer connected?"
msgstr ""
"Jokainen tulostusjono (johon tulostust�it� ohjataan) tarvitsee\n"
"nimen (usein lp) ja jonohakemiston joka liittyy nimeen. Mit�\n"
"nime� ja hakemistoa k�ytet��n t�lle jonolle ja miten tulostin\n"
"on liitetty?"

#: ../../printerdrake.pm_.c:450
#, fuzzy
msgid "Name of printer"
msgstr "Paikallinen kirjoitin"

#: ../../printerdrake.pm_.c:451
#, fuzzy
msgid "Description"
msgstr "Lis�asetukset"

#: ../../printerdrake.pm_.c:452
#, fuzzy
msgid "Location"
msgstr "Tietoa"

#: ../../printerdrake.pm_.c:465
msgid ""
"Every print queue (which print jobs are directed to) needs a\n"
"name (often lp) and a spool directory associated with it. What\n"
"name and directory should be used for this queue and how is the printer "
"connected?"
msgstr ""
"Jokainen tulostusjono (johon tulostust�it� ohjataan) tarvitsee\n"
"nimen (usein lp) ja jonohakemiston joka liittyy nimeen. Mit�\n"
"nime� ja hakemistoa k�ytet��n t�lle jonolle ja miten tulostin\n"
"on liitetty?"

#: ../../printerdrake.pm_.c:468
msgid "Name of queue"
msgstr "Jonon nimi"

#: ../../printerdrake.pm_.c:469
msgid "Spool directory"
msgstr "Jonohakemisto"

#: ../../printerdrake.pm_.c:470
msgid "Printer Connection"
msgstr "Kirjoitinyhteys"

#: ../../raid.pm_.c:32
#, c-format
msgid "Can't add a partition to _formatted_ RAID md%d"
msgstr "En voi lis�t� osiota _alustetulle_ RAID:lle md%d"

#: ../../raid.pm_.c:102
msgid "Can't write file $file"
msgstr "En voi kirjoittaa tiedostoa $file"

#: ../../raid.pm_.c:127
msgid "mkraid failed"
msgstr "mkraid ep�onnistui"

#: ../../raid.pm_.c:127
msgid "mkraid failed (maybe raidtools are missing?)"
msgstr "mkraid ep�onnistui (ehk� raid-ty�kalut puuttuvat?)"

#: ../../raid.pm_.c:143
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "Ei riitt�v�sti osioita RAID tasolle %d\n"

#: ../../services.pm_.c:15
msgid "Anacron a periodic command scheduler."
msgstr "Anacron on jaksottainen komentojen ajastaja."

#: ../../services.pm_.c:16
msgid ""
"apmd is used for monitoring batery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd:ta k�ytet��n valvomaan paristojen tilaa ja raportoimaan siit� syslogin\n"
"kautta. apmd:t� voidaan my�s k�ytt�� sulkemaan kone patterien ollessa tyhji�."

#: ../../services.pm_.c:18
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""
"Ajaa komentoja m��r�tyill� ajanhetkill�, jotka on m��ritelty at-komennolla.\n"
"Ajaa my�s er�ajoja, kun j�rjestelm�n kuormitus on riitt�v�n matala."

#: ../../services.pm_.c:20
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"cron on UNIX:n perusohjelma joka ajaa m��riteltyj� ohjelmia m��r�tyill�\n"
"ajanhetkill�. vixie cron lis�� monia omianisuuksia verrattuna normaaliin\n"
"UNIX:n cron ohjelmaan, kuten paremman turvallisuuden ja laajemmat asetukset."

#: ../../services.pm_.c:23
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM lis�� hiirituen tekstipohjaisiin Linux-sovelluksiin kuten Midnight\n"
"Commander. GPM mahdollistaa my�s leikkaa/liimaa toiminnot hiirell�,\n"
"ja sis�lt�� tuen valikoille konsolissa."

#: ../../services.pm_.c:26
msgid ""
"Apache is a World Wide Web server.  It is used to serve HTML files\n"
"and CGI."
msgstr ""
"Apache on WWW-palvelin. Palvelinta k�ytet��n jakamaan HTML-\n"
"tiedostoja ja ajamaan CGI-ohjelmia."

#: ../../services.pm_.c:28
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"Internet p��palvelin (yleens� inetd) k�ynnist�� useita eri\n"
"internet palveluita tarpeen mukaan. Palvelin k�ynnist�� useita\n"
"palveluita, kuten telnet, ftp, rsh ja rlogin. inetd:n poistaminen\n"
"poistaa my�s n�m� palvelut k�yt�st�."

#: ../../services.pm_.c:32
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"Paketti lataa valitun n�pp�inkartan /etc/sysconfig/keyboard\n"
"tiedoston asetusten mukaisesti.  Asetukset voidaan valita kbdconfig "
"ty�kalulla.\n"
"T�m� tulisi ottaa k�ytt��n l�hes kaikissa j�rjestelmiss�."

#: ../../services.pm_.c:35
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
"lpd on tulostuspalvelin, jonka lpr ohjelma vaatii toimiakseen.\n"
"lpd on palvelin joka jakaa tulostust�it� tulostimille."

#: ../../services.pm_.c:37
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
"host names to IP addresses."
msgstr ""
"named (BIND) on nimipalvelin (DNS) jota k�ytet��n selvitt�m��n\n"
"koneen nimi� sek� IP-osoitteita."

#: ../../services.pm_.c:39
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"Liitt�� ja irroittaa NFS (Network File System), SMB (Lan\n"
"Manager/Windows) ja NCP (NetWare) liitospisteit�"

#: ../../services.pm_.c:41
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"Aktivoi/Poistaa kaikki verkkoliittym�t jotka on asetettu\n"
"k�ynnistyksess�."

#: ../../services.pm_.c:43
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS on yleinen protokolla tiedostojen jakoon TCP/IP-\n"
"verkoissa. T�m� palvelu mahdollistaa NFS-palvelimen\n"
"k�ynnistyksen, jakoa ohjataan tiedostosta /etc/exports."

#: ../../services.pm_.c:46
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS on yleinen protokolla tiedostojen jakoon TCP/IP-\n"
"verkoissa. T�m� palvelu mahdollistaa NSF-tiedostolukot."

#: ../../services.pm_.c:48
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It won't get started unless configured so it is safe to "
"have\n"
"it installed on machines that don't need it."
msgstr ""
"PCMIA tukea k�ytet��n yleens� kannettavissa ethernet- ja modeemi-\n"
"korttien tukemiseen. Palvelu ei k�ynnisty ellei sit� ole asetettu, joten\n"
"sen voi asentaa my�s koneisiin jotka eiv�t sit� tarvitse."

#: ../../services.pm_.c:51
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"portmapper hallitsee RPC-yhteyksi�, joita k�ytt�v�t esimerkiksi\n"
"NFS ja NIS-protokollat. portmap-palvelin on oltava k�ynniss�\n"
"j�rjestelmiss� jotka haluavat tarjota n�it� protokollia."

#: ../../services.pm_.c:54
msgid ""
"Postfix is a Mail Transport Agent, which is the program that\n"
"moves mail from one machine to another."
msgstr ""
"Postfix on s�hk�postinv�litysohjelma, eli ohjelma joka\n"
"v�litt�� postia koneelta toiselle."

#: ../../services.pm_.c:56
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""
"Tallentaa ja palauttaa j�rjestelm�n satunnaislukualtaan, t�m� parantaa\n"
"satunnaislukujen laatua."

#: ../../services.pm_.c:58
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""
"routed-palvelin mahdollistaa automaattiset IP-reititystaulun p�ivitykset\n"
"RIP-protokollalla. Vaikka RIP-protokolla on paljon k�ytetty pieniss� "
"verkoissa,\n"
"monimutkaisemmat verkot vaativat parempia reititysprotokollia."

#: ../../services.pm_.c:61
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""
"rstart-protokolla mahdollistaa verkkok�ytt�jille\n"
"eri koneiden tilatietojen haun."

#: ../../services.pm_.c:63
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""
"rusers-protokolla verkon k�ytt�jille mahdollisuuden tunnistaa, ketk�\n"
"ovat sis�ll� eri koneissa."

#: ../../services.pm_.c:65
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
"rwho-protokollalla et�k�ytt�j�t voivat listata kaikki koneella\n"
"olevat k�ytt�j�t (vastaa fingeri�)."

#: ../../services.pm_.c:67
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""
"Syslog on tapa jolla monet palvelimet kirjottavat viestins� talteen\n"
"useisiin lokitiedostoihin.  On j�rkev�� k�ytt�� syslog-ohjelmaa."

#: ../../services.pm_.c:69
msgid "This startup script try to load your modules for your usb mouse."
msgstr "T�m� k�ynnistysskripti yritt�� ladata modulit usb hiirellesi."

#: ../../services.pm_.c:70
msgid "Starts and stops the X Font Server at boot time and shutdown."
msgstr ""
"K�ynnist�� ja pys�ytt�� X kirjasinpalvelimen k�ynnistyksess� ja lopetuksessa"

#: ../../services.pm_.c:99
msgid "Choose which services should be automatically started at boot time"
msgstr "Valitse mitk� palvelut k�ynnistet��n automaattisesti"

#: ../../standalone/diskdrake_.c:61
msgid ""
"I can't read your partition table, it's too corrupted for me :(\n"
"I'll try to go on blanking bad partitions"
msgstr ""
"Osiotaulua ei voida lukea, siin� on liikaa virheit� :(\n"
"Taulu yritet��n korjata nollaamalla se"

#: ../../standalone/drakboot_.c:25
msgid "Configure LILO/GRUB"
msgstr "Aseta LILO/GRUB"

#: ../../standalone/drakboot_.c:26
msgid "Create a boot floppy"
msgstr "Luo k�ynnistyslevyke"

#: ../../standalone/drakboot_.c:28
msgid "Format floppy"
msgstr "Alusta levyke"

#: ../../standalone/drakboot_.c:40
msgid "Choice"
msgstr "Valinta"

#: ../../standalone/drakboot_.c:59
msgid "Installation of LILO failed. The following error occured:"
msgstr "LILO:n asennus ep�onnistu. Seuraava virhe tapahtui:"

#: ../../standalone/drakgw_.c:103
msgid "Internet Connection Sharing currently enabled"
msgstr ""

#: ../../standalone/drakgw_.c:104
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""

#: ../../standalone/drakgw_.c:107 ../../standalone/drakgw_.c:108
#, fuzzy
msgid "disable"
msgstr "Taulukko"

#: ../../standalone/drakgw_.c:107 ../../standalone/drakgw_.c:118
#: ../../standalone/drakgw_.c:126 ../../standalone/drakgw_.c:137
msgid "dismiss"
msgstr ""

#: ../../standalone/drakgw_.c:107 ../../standalone/drakgw_.c:126
#, fuzzy
msgid "reconfigure"
msgstr "Aseta X"

#: ../../standalone/drakgw_.c:122
msgid "Internet Connection Sharing currently disabled"
msgstr ""

#: ../../standalone/drakgw_.c:123
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""

#: ../../standalone/drakgw_.c:126 ../../standalone/drakgw_.c:127
#, fuzzy
msgid "enable"
msgstr "Taulukko"

#: ../../standalone/drakgw_.c:141
msgid "Config file content could not be interpreted."
msgstr ""

#: ../../standalone/drakgw_.c:151
#, fuzzy
msgid "Internet Connection Sharing"
msgstr "Kirjoitinyhteys"

#: ../../standalone/drakgw_.c:152
msgid ""
"Your computer can be configured to share its Internet connection.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN).\n"
"\n"
"Would you like to setup the Internet Connection Sharing?"
msgstr ""

#: ../../standalone/drakgw_.c:177
#, fuzzy
msgid "using module"
msgstr "Verkkoalue"

#: ../../standalone/drakgw_.c:210
msgid "No network adapter on your system!"
msgstr ""

#: ../../standalone/drakgw_.c:211
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr ""

#: ../../standalone/drakgw_.c:218
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"$interface\n"
"\n"
"Would you like to setup your Local Area Network with that adapter?"
msgstr ""

#: ../../standalone/drakgw_.c:223
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr ""

#: ../../standalone/drakgw_.c:233
msgid ""
"Warning, the network adapter is already configured.\n"
"Would you like to reconfigure?"
msgstr ""

#: ../../standalone/drakgw_.c:258
msgid "Potential LAN address conflict found in current config of $_!\n"
msgstr ""

#: ../../standalone/drakgw_.c:268
#, fuzzy
msgid "Firewalling configuration detected!"
msgstr "luen asetuksia"

#: ../../standalone/drakgw_.c:269
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fix after installation. Proceed?"
msgstr ""

#: ../../standalone/drakgw_.c:282
msgid "Configuring scripts, installing software, starting servers..."
msgstr ""

#: ../../standalone/drakgw_.c:282
#, fuzzy
msgid "Configuring..."
msgstr "Asetan IDE-levy�"

#: ../../standalone/drakgw_.c:313
msgid "Problems installing package $bin2rpm{$_}"
msgstr ""

#: ../../standalone/drakgw_.c:504
msgid "Congratulations!"
msgstr "Onnittelut!"

#: ../../standalone/drakgw_.c:505
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP)."
msgstr ""

#: ../../standalone/draksec_.c:28
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive: it must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"T�t� tasoa tulee k�ytt�� varoen. Se tekee j�rjestelm�st�si helpomman "
"k�ytt��,\n"
"mutta hyvin herk�n: sit� ei tule k�ytt�� koneessa joka on kytketty muihin "
"koneisiin\n"
"tai Internettiin. Koneessa ei ole salasanoja."

#: ../../standalone/draksec_.c:31
msgid ""
"Password are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""
"Salasanat ovat nyt k�yt�ss� mutta koneen k�ytt� verkossa ei ole suositeltua."

#: ../../standalone/draksec_.c:32
msgid ""
"Few improvements for this security level, the main one is that there are\n"
"more security warnings and checks."
msgstr ""
"Muutamia parannuksia t�ll� turvaasolla, suurimpana se ett� j�rjestelm�ss�\n"
"on enemm�n turvallisuusvaroituksia ja tarkistuksia."

#: ../../standalone/draksec_.c:34
msgid ""
"This is the standard security recommended for a computer that will be used\n"
"to connect to the Internet as a client. There are now security checks. "
msgstr ""
"T�m� on normaaliturvallisuustaso jota suositellaan tietokoneelle jota\n"
"k�ytet��n Internettiin liitettyn�. J�rjestelm�ss� on "
"turvallisuustarkastuksia."

#: ../../standalone/draksec_.c:36
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which accept\n"
"connections from many clients. "
msgstr ""
"T�ll� turvallisuustasolla j�rjestelm�n k�ytt� palvelimena on mahdollista.\n"
"J�rjestelm�� voidaan k�ytt�� palvelimena joka hyv�ksyy yhteyksi� monilta\n"
"asiakkailta. "

#: ../../standalone/draksec_.c:39
msgid ""
"We take level 4 features, but now the system is entirely closed.\n"
"Security features are at their maximum."
msgstr ""
"Systeemi on nyt t�ysin suljettu.\n"
"Turvallisuusasetukset ovat tiukimmillaan."

#: ../../standalone/draksec_.c:49
msgid "Setting security level"
msgstr "Asetan turvatasoa"

#: ../../standalone/drakxconf_.c:21
msgid "Choose the tool you want to use"
msgstr "Valitse haluamasi ty�kalu"

#: ../../standalone/keyboarddrake_.c:14
msgid "usage: keyboarddrake [--expert]\n"
msgstr ""

#: ../../standalone/keyboarddrake_.c:27
msgid "Do you want the BackSpace to return Delete in console?"
msgstr ""

#: ../../standalone/livedrake_.c:23
#, fuzzy
msgid "Change Cd-Rom"
msgstr "Vaihda resoluutiota"

#: ../../standalone/livedrake_.c:24
#, fuzzy
msgid ""
"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
"Vaihda CD-levy�!\n"
"\n"
"Aseta CD-levy nimelt��n \"%s\" CD-asemaan ja paina Ok kun olet valmis.\n"
"Jos sinulla ei ole levy�, paina Peruuta v�ltt��ksesi asennukset t�lt� "
"levylt�."

#: ../../standalone/livedrake_.c:34
msgid "Unable to start live upgrade !!!\n"
msgstr ""

#: ../../standalone/mousedrake_.c:32
msgid "no serial_usb found\n"
msgstr "serial_usb:ta ei l�ytynyt\n"

#: ../../standalone/mousedrake_.c:37
msgid "Emulate third button?"
msgstr "Emuloi kolmatta n�pp�int�?"

#: ../../standalone/mousedrake_.c:41
msgid "Which serial port is your mouse connected to?"
msgstr "Mihin sarjaporttiin hiiresi on liitetty?"

#: ../../standalone/rpmdrake_.c:25
msgid "reading configuration"
msgstr "luen asetuksia"

#: ../../standalone/rpmdrake_.c:45 ../../standalone/rpmdrake_.c:50
#: ../../standalone/rpmdrake_.c:253
msgid "File"
msgstr "Tiedosto"

#: ../../standalone/rpmdrake_.c:48 ../../standalone/rpmdrake_.c:229
#: ../../standalone/rpmdrake_.c:253 ../../standalone/rpmdrake_.c:269
msgid "Search"
msgstr "Etsi"

#: ../../standalone/rpmdrake_.c:49 ../../standalone/rpmdrake_.c:56
msgid "Package"
msgstr "Paketti"

#: ../../standalone/rpmdrake_.c:51
msgid "Text"
msgstr "Teksti"

#: ../../standalone/rpmdrake_.c:53
msgid "Tree"
msgstr "Puu"

#: ../../standalone/rpmdrake_.c:54
msgid "Sort by"
msgstr "Lajittele"

#: ../../standalone/rpmdrake_.c:55
msgid "Category"
msgstr "Kategoria"

#: ../../standalone/rpmdrake_.c:58
msgid "See"
msgstr "Katso"

#: ../../standalone/rpmdrake_.c:59 ../../standalone/rpmdrake_.c:163
msgid "Installed packages"
msgstr "Asennetut paketit"

#: ../../standalone/rpmdrake_.c:60
msgid "Available packages"
msgstr "Saatavilla olevat paketit"

#: ../../standalone/rpmdrake_.c:62
msgid "Show only leaves"
msgstr "N�yt� vain lehdet"

#: ../../standalone/rpmdrake_.c:67
msgid "Expand all"
msgstr "Avaa kaikki"

#: ../../standalone/rpmdrake_.c:68
msgid "Collapse all"
msgstr "Sulje kaikki"

#: ../../standalone/rpmdrake_.c:70
msgid "Configuration"
msgstr "Asetukset"

#: ../../standalone/rpmdrake_.c:71
msgid "Add location of packages"
msgstr "Lis�� pakettien sijainti"

#: ../../standalone/rpmdrake_.c:75
msgid "Update location"
msgstr "P�ivit� sijainti"

#: ../../standalone/rpmdrake_.c:79 ../../standalone/rpmdrake_.c:328
msgid "Remove"
msgstr "Poista"

#: ../../standalone/rpmdrake_.c:100
msgid "Configuration: Add Location"
msgstr "Asetukset: Lis�� sijainti"

#: ../../standalone/rpmdrake_.c:103
msgid "Find Package"
msgstr "Etsi paketti"

#: ../../standalone/rpmdrake_.c:104
msgid "Find Package containing file"
msgstr "Etsi paketti joka sis�lt�� tiedoston"

#: ../../standalone/rpmdrake_.c:105
msgid "Toggle between Installed and Available"
msgstr "Vaihda asennettujen ja saatavillaolevien v�lill�"

#: ../../standalone/rpmdrake_.c:139
msgid "Files:\n"
msgstr "Tiedostot:\n"

#: ../../standalone/rpmdrake_.c:161 ../../standalone/rpmdrake_.c:209
msgid "Uninstall"
msgstr "Poista"

#: ../../standalone/rpmdrake_.c:163
msgid "Choose package to install"
msgstr "Valitse asennettava paketti"

#: ../../standalone/rpmdrake_.c:190
msgid "Checking dependencies"
msgstr "Tarkistan riippuvuuksia"

#: ../../standalone/rpmdrake_.c:190 ../../standalone/rpmdrake_.c:409
msgid "Wait"
msgstr "Odota"

#: ../../standalone/rpmdrake_.c:209
msgid "The following packages are going to be uninstalled"
msgstr "Seuraavat paketit poistetaan"

#: ../../standalone/rpmdrake_.c:210
msgid "Uninstalling the RPMs"
msgstr "Poistan RPM-paketteja"

#: ../../standalone/rpmdrake_.c:229 ../../standalone/rpmdrake_.c:269
msgid "Regexp"
msgstr "S��nn�llinen lause"

#: ../../standalone/rpmdrake_.c:229
msgid "Which package are looking for"
msgstr "Mit� paketteja etsit"

#: ../../standalone/rpmdrake_.c:238 ../../standalone/rpmdrake_.c:262
#: ../../standalone/rpmdrake_.c:278
#, c-format
msgid "%s not found"
msgstr "%s ei l�ytynyt"

#: ../../standalone/rpmdrake_.c:238 ../../standalone/rpmdrake_.c:262
#: ../../standalone/rpmdrake_.c:278
msgid "No match"
msgstr "Ei osumia"

#: ../../standalone/rpmdrake_.c:238 ../../standalone/rpmdrake_.c:262
#: ../../standalone/rpmdrake_.c:278
msgid "No more match"
msgstr "Ei lis�� osumia"

#: ../../standalone/rpmdrake_.c:246
msgid ""
"rpmdrake is currently in ``low memory'' mode.\n"
"I'm going to relaunch rpmdrake to allow searching files"
msgstr ""
"rpmdrake on 'matalamuistitilassa'.\n"
"rpmdrake k�ynnistet��n uudelleen tiedostojen hakemiseksi"

#: ../../standalone/rpmdrake_.c:253
msgid "Which file are you looking for?"
msgstr "Mit� tiedostoa etsit?"

#: ../../standalone/rpmdrake_.c:269
msgid "What are looking for?"
msgstr "Mit� etsit?"

#: ../../standalone/rpmdrake_.c:289
msgid "Give a name (eg: `extra', `commercial')"
msgstr "Anna nimi (esim. 'extra', 'kaupallinen')"

#: ../../standalone/rpmdrake_.c:291
msgid "Directory"
msgstr "Hakemisto"

#: ../../standalone/rpmdrake_.c:294
msgid "No cdrom available (nothing in /mnt/cdrom)"
msgstr "Ei cdrommia (ei mit��n /mnt/cdrom:ssa)"

#: ../../standalone/rpmdrake_.c:298
msgid "URL of the directory containing the RPMs"
msgstr "URL joka sis�lt�� RPM-paketit"

#: ../../standalone/rpmdrake_.c:299
msgid ""
"For FTP and HTTP, you need to give the location for hdlist\n"
"It must be relative to the URL above"
msgstr ""
"FTP:lle ja HTTP:lle sinun tulee antaa hdlist tiedoston sijainti\n"
"Sen tulee olla suhteessa yll�olevaan URL:n"

#: ../../standalone/rpmdrake_.c:302
msgid "Please submit the following information"
msgstr "Anna seuraavat tiedot"

# mat
#: ../../standalone/rpmdrake_.c:304
#, c-format
msgid "%s is already in use"
msgstr "%s on jo k�yt�ss�"

#: ../../standalone/rpmdrake_.c:315 ../../standalone/rpmdrake_.c:321
#: ../../standalone/rpmdrake_.c:329
msgid "Updating the RPMs base"
msgstr "P�ivitet��n RPM base"

# mat
#: ../../standalone/rpmdrake_.c:328
#, c-format
msgid "Going to remove entry %s"
msgstr "Poistetaan tietue %s"

#: ../../standalone/rpmdrake_.c:360
msgid "Finding leaves"
msgstr "Etsin lehti�"

#: ../../standalone/rpmdrake_.c:360
msgid "Finding leaves takes some time"
msgstr "Lehtien haku kest�� jonkin aikaa"

# ../../share/compssUsers
msgid "Graphics Manipulation"
msgstr ""

# ../../share/compssUsers
msgid "KDE, QT, Gnome, GTK+"
msgstr ""

# ../../share/compssUsers
msgid "Personnal Finance"
msgstr ""

# ../../share/compssUsers
msgid "Python, Perl, libraries, tools"
msgstr ""

# ../../share/compssUsers
msgid "Scientific applications"
msgstr ""

# ../../share/compssUsers
msgid "Databases"
msgstr ""

#, fuzzy
msgid "Internet"
msgstr "kiinnostava"

#, fuzzy
msgid "Multimedia - Graphics"
msgstr "Multimedia"

# ../../share/compssUsers
msgid "editors, shells, file tools, terminals"
msgstr ""

#, fuzzy
msgid "Development applications"
msgstr "Kehitys"

# ../../share/compssUsers
msgid "Audio-related tools: mp3 or midi players, mixers, etc"
msgstr ""

msgid "Multimedia"
msgstr "Multimedia"

msgid "Office"
msgstr "Toimistosovellukset"

# ../../share/compssUsers
msgid "Sciences"
msgstr ""

# ../../share/compssUsers
msgid ""
"Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and file "
"transfer tools"
msgstr ""

# ../../share/compssUsers
msgid ""
"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
"browse the Web"
msgstr ""

# ../../share/compssUsers
msgid "C and C++ development libraries, programs and include files"
msgstr ""

# ../../share/compssUsers
msgid "Communication facilities"
msgstr ""

#, fuzzy
msgid "KDE"
msgstr "IDE"

# ../../share/compssUsers
msgid "Personnal Information Management"
msgstr ""

# ../../share/compssUsers
msgid "Programs to manage your finance, such as gnucash"
msgstr ""

msgid "Gnome"
msgstr "Gnome"

#, fuzzy
msgid "Internet Tools"
msgstr "V�lityspalvelimien asetus"

msgid "Documentation"
msgstr "Dokumentaatio"

# ../../share/compssUsers
msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr ""

# ../../share/compssUsers
msgid "Utilities"
msgstr ""

#, fuzzy
msgid "Multimedia - Sound"
msgstr "Multimedia"

# ../../share/compssUsers
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr ""

# ../../share/compssUsers
msgid "Video players and editors"
msgstr ""

# ../../share/compssUsers
msgid "Console Tools"
msgstr ""

#, fuzzy
msgid "Development other"
msgstr "Kehitys"

# ../../share/compssUsers
msgid "Databases clients and servers (mysql and postgresql)"
msgstr ""

# ../../share/compssUsers
msgid "Sound and video playing/editing programs"
msgstr ""

# ../../share/compssUsers
msgid "Books and Howto's on Linux and Free Software"
msgstr ""

# ../../share/compssUsers
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr ""

#, fuzzy
msgid "Games"
msgstr "Gnome"

#, fuzzy
msgid "Development C/C++"
msgstr "Kehitys"

#, fuzzy
msgid "Multimedia - Video"
msgstr "Multimedia"

# ../../share/compssUsers
msgid "Graphics programs such as The Gimp"
msgstr ""

# ../../share/compssUsers
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr ""

# ../../share/compssUsers
msgid "Tools to create and burn CD's"
msgstr ""

# ../../share/compssUsers
msgid "More Graphical Desktops (Gnome, IceWM)"
msgstr ""

#, fuzzy
msgid "Multimedia - CD Burning"
msgstr "Multimedia"

# ../../share/compssUsers
msgid "Archiving, emulators, monitoring"
msgstr ""

# ../../share/compssUsers
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""

# ../../share/compssUsers
msgid "Other Graphical Desktops"
msgstr ""

# ../../share/compssUsers
msgid "Tools for your Palm Pilot or your Visor"
msgstr ""

# ../../share/compssUsers
msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr ""

# ../../share/compssUsers
msgid "Set of tools for mail, news, web, file transfer, and chat"
msgstr ""

#~ msgid "Czech"
#~ msgstr "T�ekki"

#~ msgid "Slovakian"
#~ msgstr "Slovakia"

#, fuzzy
#~ msgid "Reconfigure local network"
#~ msgstr "Muuta verkon asetuksia"

#, fuzzy
#~ msgid "Connect to Internet with a normal modem"
#~ msgstr "Yhteyden nimi"

#, fuzzy
#~ msgid "Connect to Internet using ISDN"
#~ msgstr "Yhteyden nimi"

#, fuzzy
#~ msgid "Connect to Internet using DSL (or ADSL)"
#~ msgstr "Yhteyden nimi"

#, fuzzy
#~ msgid "Connect to Internet using Cable"
#~ msgstr "Yhteyden nimi"

#, fuzzy
#~ msgid "Germany"
#~ msgstr "Saksa"

#, fuzzy
#~ msgid "Germany (1TR6)"
#~ msgstr "Saksa"

#, fuzzy
#~ msgid "What do you wish to do?"
#~ msgstr "Mit� haluat tehd�?"

#, fuzzy
#~ msgid "Install/Rescue"
#~ msgstr "Asenna"

#, fuzzy
#~ msgid "Rescue"
#~ msgstr "Uusi koko"

#~ msgid "Which partition type do you want?"
#~ msgstr "Mink� osiotyypin haluat?"

#, fuzzy
#~ msgid ""
#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
#~ "installed, or if you wish to use multiple distributions or versions.\n"
#~ "\n"
#~ "Choose \"Rescue\" if you wish to rescue a version of Linux-Mandrake already "
#~ "installed.\n"
#~ "\n"
#~ "\n"
#~ "Select:\n"
#~ "\n"
#~ "  - Recommended: If you have never installed GNU/Linux before, choose this.\n"
#~ "\n"
#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
#~ "choose\n"
#~ "    the primary usage for your machine. See below for details.\n"
#~ "\n"
#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
#~ "    perform a highly customized installation. As for a \"Customized\"\n"
#~ "    installation class, you will be able to select the usage for your "
#~ "system.\n"
#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
#~ "DOING!\n"
#~ msgstr ""
#~ "Valitse \"Asenna\" jos sinulla ei ole Linuxia ennest��n asennettuna,\n"
#~ "tai jos haluat k�ytt�� useita eri levitysversioita.\n"
#~ "\n"
#~ "Valitse \"P�ivit�\", jos haluat p�ivitt�� vanhaa Mandraken versiota Linux:\n"
#~ "%s tai %s.\n"
#~ "\n"
#~ "\n"
#~ "Valitse:\n"
#~ "  - Automaattinen (suositeltu): Jos et ole koskaan asentanut linuxia ennen, "
#~ "valitse t�m�. HUOMAA:\n"
#~ "    verkkoa ei aseteta t�ss� asennuksessa, k�yt� \"LinuxConf\" asettaaksesi "
#~ "verkon\n"
#~ "    asennuksen j�lkeen.\n"
#~ "\n"
#~ "  - Muokattu: Jos tunnet GNU/Linuxin ennest��n, voit valita erikseen koneen "
#~ "k�ytt�tarkoituksen.\n"
#~ "    Katso alta lis�tietoja.\n"
#~ "\n"
#~ "  - Ekspertti: Valinta edellytt��, ett� tunnet GNU/Linuxin ennest��n hyvin "
#~ "ja haluat tehd�\n"
#~ "    eritt�in mukautetun asennuksen. My�s t�ss� luokassa voit valita koneesi "
#~ "k�ytt�tarkoituksen.\n"
#~ "    Mutta �l� valitse t�t�, JOS ET TIED� MIT� TEET!\n"

#, fuzzy
#~ msgid ""
#~ "At this point, you may choose what partition(s) to use to install\n"
#~ "your Linux-Mandrake system if they have been already defined (from a\n"
#~ "previous install of GNU/Linux or from another partitioning tool). In other\n"
#~ "cases, hard drive partitions must be defined. This operation consists of\n"
#~ "logically dividing the computer's hard drive capacity into separate\n"
#~ "areas for use.\n"
#~ "\n"
#~ "\n"
#~ "If you have to create new partitions, use \"Auto allocate\" to "
#~ "automatically\n"
#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
#~ "by\n"
#~ "clicking on \"hda\" for the first IDE drive,\n"
#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
#~ "\n"
#~ "\n"
#~ "Two common partition are: the root partition (/), which is the starting\n"
#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
#~ "all files necessary to start the operating system when the\n"
#~ "computer is first turned on.\n"
#~ "\n"
#~ "\n"
#~ "Because the effects of this process are usually irreversible, partitioning\n"
#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
#~ "simplifies the process so that it must not be. Consult the documentation\n"
#~ "and take your time before proceeding.\n"
#~ "\n"
#~ "\n"
#~ "You can reach any option using the keyboard: navigate through the "
#~ "partitions\n"
#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
#~ "\n"
#~ "- Ctrl-c  to create a new partition (when an empty partition is selected)\n"
#~ "\n"
#~ "- Ctrl-d  to delete a partition\n"
#~ "\n"
#~ "- Ctrl-m  to set the mount point\n"
#~ msgstr ""
#~ "T�ss� vaiheessa sinun tulee valita partitio tai partitiot joille haluat\n"
#~ "asentaa Linux-Mandrake j�rjestelm�si, jos ne ovat jo olemassa\n"
#~ "(edellisest� Linux asennuksesta tai jostain muusta osiointity�kalusta).\n"
#~ "Muissa tapauksissa kiintolevy tulee osioida. Operaatiossa kiintolevy\n"
#~ "loogisesti osioidaan eri k�ytt�tarkoituksiin.\n"
#~ "\n"
#~ "\n"
#~ "Jos sinun t�ytyy luoda uusia osioita k�yt� \"Automaattinen varaus\"\n"
#~ "toimintoa osioiden luonnin automatisoimiseksi. Voit valita osioitavan levyn\n"
#~ "klikkaamalla \"hda\":ta ensimm�iselle IDE-levylle, \"hdb\":ta toiselle\n"
#~ "tai \"sda\":ta ensimm�iselle SCSI-levylle jne.\n"
#~ "\n"
#~ "\n"
#~ "Kaksi yleist� osiota ovat: juurosio (/), joka on j�rjestelm�n\n"
#~ "k�ynnistymispiste tiedostoj�rjestelm�ss�, ja /boot joka sis�lt�� kaikki\n"
#~ "tarpeelliset tiedostot j�rjestelm�n k�ynnist�miseksi, kun se laitetaan\n"
#~ "k�yntiin.\n"
#~ "\n"
#~ "\n"
#~ "Koska toimenpiteen muutoksia ei yleens� voida peruuttaa, osiointi voi\n"
#~ "olla pelottavaa ja vaikeaa uudellen k�ytt�j�lle. DiskDrake-ohjelma\n"
#~ "helpottaa toimenpidett�. Lue dokumentaatiota ja tutki asia huolella\n"
#~ "ennenkuin jatkat.\n"
#~ "\n"
#~ "\n"
#~ "Voit k�ytt�� kaikkia toimintoja n�pp�imist�lt�: selaa osiota k�ytt�en\n"
#~ "Tab ja Yl�s/Alas nuolia. Kun osio on valittu, voit k�ytt��:\n"
#~ "\n"
#~ "- Ctrl-c  luodakdesi uuden osion (kun tyhj� osio on valittu)\n"
#~ "\n"
#~ "- Ctrl-d  tuhotaksesi osion\n"
#~ "\n"
#~ "- Ctrl-m  asettaaksesi liitospisteen\n"

#~ msgid ""
#~ "Any partitions that have been newly defined must be formatted for\n"
#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
#~ "wish to re-format some already existing partitions to erase the data\n"
#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
#~ "partitions, particularly if they contain files or data you wish to keep.\n"
#~ "Typically retained are /home and /usr/local."
#~ msgstr ""
#~ "Kaikki uudelleenm��ritellyt uudet osiot tulee alustaa, jotta niit� voidaan\n"
#~ "k�ytt�� (alustus tarkoittaa tiedostoj�rjestelm�n luomista). Samalla\n"
#~ "voit uudelleenalustaa joitain osioita joilta haluat poistaa tiedot.\n"
#~ "Huomaa: Olemassaolevien partitioiden alustus ei ole pakollista,\n"
#~ "varsinkin jos ne sis�lt�v�t ennest��n tiedostoja jotka haluat s�ilytt��.\n"
#~ "Normaalisti s�ilytett�vi� ovat /home ja /usr/local."

#~ msgid ""
#~ "The packages selected are now being installed. This operation\n"
#~ "should take a few minutes unless you have chosen to upgrade an\n"
#~ "existing system, in that case it can take more time even before\n"
#~ "upgrade starts."
#~ msgstr ""
#~ "Valitsemiasi paketteja asennetaan. T�m�n vaiheen tulisi kest��\n"
#~ "muutamia minuutteja, ellet ole valinnut olemassaolevan j�rjestelm�n\n"
#~ "p�ivityst�. P�ivitys kest�� kauemmin jopa ennenkuin itse p�ivitys\n"
#~ "alkaa."

#, fuzzy
#~ msgid ""
#~ "If DrakX failed to find your mouse, or if you want to\n"
#~ "check what it has done, you will be presented the list of mice\n"
#~ "above.\n"
#~ "\n"
#~ "\n"
#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
#~ "Otherwise you may choose the mouse that more closely matches your own\n"
#~ "from the menu above.\n"
#~ "\n"
#~ "\n"
#~ "In case of a serial mouse, you will also have to tell DrakX\n"
#~ "which serial port it is connected to."
#~ msgstr ""
#~ "Jos DrakX ei l�yt�nyt hiirt�si tai haluat tarkistaa mit� ohjelma\n"
#~ "teki sinulle, n�et listan hiirist� yl�puolella.\n"
#~ "\n"
#~ "\n"
#~ "Jos olet samaa mielt� DrakX:n asetuksista hypp�� haluamaasi osioon\n"
#~ "klikkaamalla valikkoa vasemmalla. Muuten valitse valikosta hiiren\n"
#~ "tyyppi jonka uskot olevan l�hinn� omaa hiirt�si.\n"
#~ "\n"
#~ "\n"
#~ "Jos sinulla on sarjaporttihiiri sinun tulee my�s kertoa DrakX:lle\n"
#~ "mihin porttiin hiiri on kytketty."

#~ msgid ""
#~ "This section is dedicated to configuring a local area\n"
#~ "network (LAN) or a modem.\n"
#~ "\n"
#~ "Choose \"Local LAN\" and DrakX will\n"
#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
#~ "should be found and initialized automatically.\n"
#~ "However, if your peripheral is ISA, autodetection will not work,\n"
#~ "and you will have to choose a driver from the list that will appear then.\n"
#~ "\n"
#~ "\n"
#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
#~ "in the first time, otherwise you will have to specify the options\n"
#~ "to the driver that you will have fetched from documentation of your\n"
#~ "hardware.\n"
#~ "\n"
#~ "\n"
#~ "If you install a Linux-Mandrake system on a machine which is part\n"
#~ "of an already existing network, the network administrator will\n"
#~ "have given you all necessary information (IP address, network\n"
#~ "submask or netmask for short, and hostname). If you're setting\n"
#~ "up a private network at home for example, you should choose\n"
#~ "addresses.\n"
#~ "\n"
#~ "\n"
#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
#~ "a modem will be configured. DrakX will try to find your modem,\n"
#~ "if it fails you will have to select the right serial port where\n"
#~ "your modem is connected to."
#~ msgstr ""
#~ "T�m� osio on paikallisverkon tai modeemin asetuksia varten.\n"
#~ "\n"
#~ "Valitse \"Paikallinen LAN\" jolloin DrakX yritt�� hakea Ethernet-ohjaimia\n"
#~ "j�rjestelm�st�si. PCI-ohjaimien tulisi l�yty� ja toimia automaattisesti.\n"
#~ "Kuitenkin jos laitteesi on ISA-v�yl�ss� automaattitunnsitus ei toimi ja\n"
#~ "sinun tulee valita ajuri ilmestyv�lt� listalta.\n"
#~ "\n"
#~ "\n"
#~ "Kuten SCSI-ohjaimilla voit antaa ajurin k�ytt�� ohjainta ensin\n"
#~ "automaattisesti, jos t�m� ei toimi sinun tulee antaa ylim��r�isi�\n"
#~ "asetuksia jotka olet hakenut Windowsin ohjauspaneelista.\n"
#~ "\n"
#~ "\n"
#~ "Jos asennat Linux-Mandrake j�rjestelm�n osaksi olemassaolevaa\n"
#~ "verkkoa verkon yll�pit�j� on antanut sinulle kaikki tarvittavat\n"
#~ "tiedot (IP-osoiteen, verkkopeiteen sek� j�rjestelm�n nimen). Jos\n"
#~ "esimerkiksi asetat omaa kotiverkkoa sinun tulee itse valita n�m�\n"
#~ "osoitteet.\n"
#~ "\n"
#~ "Valitse \"Soittoyhteys\" modeemilla jolloin internet-yhteys modeemilla\n"
#~ "asetetaan. DrakX yritt�� ensin etsi� modeemiasi, jos se ei onnistu\n"
#~ "sinun tulee valita oikea sarjaportti johon modeemisi on kytketty."

#, fuzzy
#~ msgid ""
#~ "GNU/Linux can deal with many types of printer. Each of these\n"
#~ "types require a different setup. Note however that the print\n"
#~ "spooler uses 'lp' as the default printer name; so you\n"
#~ "must have one printer with such a name; but you can give\n"
#~ "several names, separated by '|' characters, to a printer.\n"
#~ "So, if you prefer to have a more meaningful name you just have\n"
#~ "to put it first, eg: \"My Printer|lp\".\n"
#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
#~ "\n"
#~ "\n"
#~ "If your printer is physically connected to your computer, select\n"
#~ "\"Local printer\". You will then have to tell which port your\n"
#~ "printer is connected to, and select the appropriate filter.\n"
#~ "\n"
#~ "\n"
#~ "If you want to access a printer located on a remote Unix machine,\n"
#~ "you will have to select \"Remote lpd\". In order to make\n"
#~ "it work, no username or password is required, but you will need\n"
#~ "to know the name of the printing queue on this server.\n"
#~ "\n"
#~ "\n"
#~ "If you want to access a SMB printer (which means, a printer located\n"
#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
#~ "plus the username, workgroup and password required in order to\n"
#~ "access the printer, and of course the name of the printer. The same goes\n"
#~ "for a NetWare printer, except that you need no workgroup information."
#~ msgstr ""
#~ "Linux osaa k�sitell� monentyyppisi� tulostimia. Jokainen n�ist�\n"
#~ "vaatii erilaisen asetukset. Huomaa, ett� tulostusjono k�ytt��\n"
#~ "'lp'-nime� oletustulostimelle, joten sinulla tulee olla yksi tulostin\n"
#~ "t�ll� nimell�. Voit antaa monia nimi� halutessasi ja erotella ne\n"
#~ "'|'-merkill�. Eli jos haluat tulostimellesi merkitsev�mm�n nimen\n"
#~ "sinun tulee vain laittaa se ensin, esim. \"Tulostimeni|lp\".\n"
#~ "Tulostin jonka nimen� on \"lp\" on oletustulostin.\n"
#~ "\n"
#~ "Jos tulostimesi on kytketty suoraan tietokoneeseesi, valitse\n"
#~ "\"Paikallinen Tulostin\". Sinun tulee kertoa mihin porttiin tulostin\n"
#~ "on kytketty ja valita sopiva suodatin.\n"
#~ "\n"
#~ "\n"
#~ "Jos haluat k�ytt�� tulostinta joka on toisessa Unix-palvelimessa,\n"
#~ "sinun tulee valita \"Et� lpd\". Saadaksesi tulostimen toimimaan\n"
#~ "k�ytt�j�nime� tai salasanaa ei tarvita, mutta sinun tulee tiet��\n"
#~ "et�koneen nimi sek� tulostusjonon nimi.\n"
#~ "\n"
#~ "\n"
#~ "Jos haluat k�ytt�� SMB tulostinta (joka tarkoittaa sit� ett�\n"
#~ "tulostin on Windows 9x/NT koneella), sinun tulee m��ritell�\n"
#~ "koneen SMB nimi (joka ei ole sama kuin sen TCP/IP nimi), ja mahdollisesti\n"
#~ "koneen IP-osoite, k�ytt�j�nimi, ty�ryhm� sek� salasana jotta voisit k�ytt��\n"
#~ "tulostinta sek� tietysti tulostimen nimi. Sama koskee NetWare tulostimia\n"
#~ "paitsi et tarvitse ty�ryhm�tietoja."

#, fuzzy
#~ msgid ""
#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
#~ "boot into GNU/Linux any more."
#~ msgstr ""
#~ "Suosittelemme ett� vastaat t�h�n \"Kyll�\". Jos asennat esimerkiksi\n"
#~ "Windowsin uudelleen asennusohjelma ylikirjoittaa k�ynnistyslohkon. Jos\n"
#~ "et ole jo tehnyt k�ynnistyslevykett� et voi k�ynnist�� t�m�n j�lkeen\n"
#~ "Linuxia uudelleen."

#~ msgid "Forget the changes?"
#~ msgstr "Unohda muutokset?"

#, fuzzy
#~ msgid "Cable connection"
#~ msgstr "Kirjoitinyhteys"

#~ msgid "Host name:"
#~ msgstr "Koneen nimi:"

#~ msgid "What is the type of your mouse?"
#~ msgstr "Mink� tyyppinen hiiri sinulla on?"

#~ msgid "Automatic resolutions"
#~ msgstr "Automaattiset resoluutiot"

#~ msgid ""
#~ "To find the available resolutions I will try different ones.\n"
#~ "Your screen will blink...\n"
#~ "You can switch if off if you want, you'll hear a beep when it's over"
#~ msgstr ""
#~ "Jotta olemassaolevat resoluutiot l�ydet��n ohjelma kokeilee eri "
#~ "resoluutioita.\n"
#~ "N�ytt�si v�l�htelee t�m�n aikana...\n"
#~ "Voit laittaa n�yt�n pois p��lt� jos haluat, kun haku on valmis ohjelma "
#~ "piippaa."

#~ msgid ""
#~ "I can try to find the available resolutions (eg: 800x600).\n"
#~ "Sometimes, though, it may hang the machine.\n"
#~ "Do you want to try?"
#~ msgstr ""
#~ "Ohjelma voi etsi� olemassaolevat resoluutiot (esim: 800x600).\n"
#~ "T�m� voi joskus lukita koneen.\n"
#~ "Haluatko yritt��?"

#~ msgid ""
#~ "No valid modes found\n"
#~ "Try with another video card or monitor"
#~ msgstr ""
#~ "Toimivia n�ytt�tiloja ei l�ytynyt\n"
#~ "Yrit� toista n�yt�nohjainta tai n�ytt��."

#~ msgid "Automatical resolutions search"
#~ msgstr "Automaattinen resoluutioiden haku"

#~ msgid "Apple ADB Mouse"
#~ msgstr "Apple ADB Hiiri"

#~ msgid "Apple ADB Mouse (2 Buttons)"
#~ msgstr "Apple ADB Hiiri (2 nappia)"

#~ msgid "Apple ADB Mouse (3+ Buttons)"
#~ msgstr "Apple ADB Hiiri (3+ nappia)"

#~ msgid "Apple USB Mouse"
#~ msgstr "Apple USB Hiiri"

#~ msgid "Apple USB Mouse (2 Buttons)"
#~ msgstr "Apple USB Hiiri (2 nappia)"

#~ msgid "Apple USB Mouse (3+ Buttons)"
#~ msgstr "Apple USB Hiiri (3+ nappia)"

#~ msgid "ASCII MieMouse"
#~ msgstr "ASCII MieMouse"

#~ msgid "Genius NetMouse Pro"
#~ msgstr "Genius NetMouse Pro"

#~ msgid "ATI Bus Mouse"
#~ msgstr "ATI Bus Mouse"

#~ msgid "Microsoft Bus Mouse"
#~ msgstr "Microsoft Bus Mouse"

#~ msgid "Logitech Bus Mouse"
#~ msgstr "Logitech Bus Mouse"

#~ msgid "USB Mouse"
#~ msgstr "USB Hiiri"

#~ msgid "USB Mouse (3 buttons or more)"
#~ msgstr "USB Hiiri (3 nappia tai enemm�n)"

#~ msgid "Microsoft Rev 2.1A or higher (serial)"
#~ msgstr "Microsoft Rev 2.1A tai korkeampi (sarja)"

#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
#~ msgstr "Logitech MouseMan+/FirstMouse+ (sarja)"

#~ msgid "ASCII MieMouse (serial)"
#~ msgstr "ASCII MieMouse (sarja)"

#~ msgid "Genius NetMouse (serial)"
#~ msgstr "Genius NetMouse (sarja)"

#~ msgid "Generic Mouse (serial)"
#~ msgstr "Yleinen hiiri (sarja)"

#~ msgid "Microsoft compatible (serial)"
#~ msgstr "Microsoft yhteensopiva (sarja)"

#~ msgid "Generic 3 Button Mouse (serial)"
#~ msgstr "Yleinen 3-nappinen hiiri (sarja)"

#, fuzzy
#~ msgid "Kensington Thinking Mouse (serial)"
#~ msgstr "Kensington Thinking Mouse"

#~ msgid "nfs mount failed"
#~ msgstr "nfs:n liitt�minen ep�onnistui"

#~ msgid "CHAP"
#~ msgstr "CHAP"

#, fuzzy
#~ msgid ""
#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
#~ "By default, the 4.0 server is used unless your card is not supported.\n"
#~ "\n"
#~ "Do you want to keep XFree 3.3?"
#~ msgstr ""
#~ "DrakX luo asetustiedostot sek� XFree 3.3:lle ett� XFree 4.0:lle.\n"
#~ "Oletuksena k�ytet��n 3.3 palvelinta, koska se toimii useammilla\n"
#~ "n�yt�nohjaimilla.\n"
#~ "\n"
#~ "Haluatko kokeilla XFree 4.0:aa?"

#~ msgid "Cryptographic"
#~ msgstr "Salakirjoitus"

#, fuzzy
#~ msgid "Configure LAN"
#~ msgstr "Aseta X"

#, fuzzy
#~ msgid "End configuration"
#~ msgstr "Asetukset"

#, fuzzy
#~ msgid "Do not set up networking"
#~ msgstr "Aseta verkko"

#~ msgid "Do you want to configure a local network for your system?"
#~ msgstr "Haluatko m��ritell� l�hiverkon j�rjestelm��si?"

#~ msgid "Show less"
#~ msgstr "N�yt� v�hemm�n"

#~ msgid "Show more"
#~ msgstr "N�yt� lis��"

#, fuzzy
#~ msgid "URI for Local printer"
#~ msgstr "Paikallinen kirjoitin"

#, fuzzy
#~ msgid "Local Printer Device (URI)"
#~ msgstr "Paikallinen tulostin"

#, fuzzy
#~ msgid ""
#~ "What URI device is your printer connected to\n"
#~ "(note that parallel:/dev/lp0 is equivalent to LPT1:)?"
#~ msgstr ""
#~ "Mihin laitteeseen tulostin on kytketty  \n"
#~ "(huomaa, ett� /dev/lp0 vastaa LPT1:t�)?\n"

#~ msgid "curly"
#~ msgstr "cirly"

#~ msgid "default"
#~ msgstr "oletus"

#~ msgid "tie"
#~ msgstr "tie"

#~ msgid "brunette"
#~ msgstr "brunetti"

#~ msgid "girl"
#~ msgstr "girl"

#~ msgid "woman-blond"
#~ msgstr "nainen-blondi"

#~ msgid "automagic"
#~ msgstr "automaattinen"

#, fuzzy
#~ msgid "Network:"
#~ msgstr "Verkkopeite:"

#, fuzzy
#~ msgid "Everything configured!"
#~ msgstr "luen asetuksia"

#~ msgid "What is your keyboard layout?"
#~ msgstr "Millainen n�pp�imist� sinulla on?"

#~ msgid "Normal"
#~ msgstr "Normaali"

#, fuzzy
#~ msgid "Configure my card"
#~ msgstr "Aseta X"

#, fuzzy
#~ msgid "pptp alcatel"
#~ msgstr "Automaattinen varaus"

#~ msgid "Try to find PCMCIA cards?"
#~ msgstr "Yrit� etsi� PCMCIA kortteja?"

#~ msgid "Try to find %s devices?"
#~ msgstr "Etsi %s laitteita?"

#, fuzzy
#~ msgid "Small(%dMB)"
#~ msgstr "(%dMt)"

#~ msgid "Modem Configuration"
#~ msgstr "Modeemin asetukset"

#~ msgid ""
#~ "Do you want to configure a dialup connection with modem for your system?"
#~ msgstr "Haluatko m��ritell� soittoyhteyden modeemilla j�rjestelm��si?"

#, fuzzy
#~ msgid "Do you want to configure a ISDN connection for your system?"
#~ msgstr "Haluatko m��ritell� l�hiverkon j�rjestelm��si?"

#~ msgid "Try to find PCI devices?"
#~ msgstr "Etsi PCI laitteita?"

#~ msgid "Searching root partition."
#~ msgstr "Etsin juuriosiota"

#~ msgid "%s: This is not a root partition, please select another one."
#~ msgstr "%s: T�m� ei ole juuriosio, valitse joku toinen."

#~ msgid "No root partition found"
#~ msgstr "Juuriosiota ei l�ytynyt"

#~ msgid "Can't use broadcast with no NIS domain"
#~ msgstr "Levitysjakelua ei voida k�ytt�� ilman NIS aluetta"

#~ msgid "Please choose a partition to use as your root partition."
#~ msgstr "Mit� osiota haluat k�ytt�� juuriosiona."

#, fuzzy
#~ msgid "Autologin at startup"
#~ msgstr "X k�ynnistyksess�"

#, fuzzy
#~ msgid "Autologin - Choose default user"
#~ msgstr "Valitse uusi koko"

#~ msgid "You don't have any enough room for Lnx4win"
#~ msgstr "Sinulla ei ole tarpeeksi tilaa Lnx4win:lle"

#~ msgid ", %U MB"
#~ msgstr ", %U Mt"

#~ msgid "Automated"
#~ msgstr "Automaattinen"

# NOTE: this message will be displayed by lilo at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
# '\204' is '�' (adiaeresis) in cp437 encoding.
# '\224' is '�' (odiaeresis) in cp437 encoding.
#
#~ msgid ""
#~ "Welcome to LILO the operating system chooser!\n"
#~ "\n"
#~ "To list the possible choices, press <TAB>.\n"
#~ "\n"
#~ "To load one of them, write its name and press <ENTER> or wait %d seconds for "
#~ "default boot.\n"
#~ "\n"
#~ msgstr ""
#~ "Tervetuloa LILO k�ytt�j�rjestelm�nvalitsijaan!\n"
#~ "\n"
#~ "Listataksesi mahdolliset valinnat paina <TAB>.\n"
#~ "\n"
#~ "Ladataksesi jonkun niist� kirjoita sen nimi ja paina <ENTER>\n"
#~ "tai odota %d sekuntia oletusk�ynnistyst�.\n"
#~ "\n"

# NOTE: this message will be displayed by SILO at boot time; that is
# only the ascii charset will be available
# so use only 7bit for this message
#
#~ msgid ""
#~ "Welcome to SILO the operating system chooser!\n"
#~ "\n"
#~ "To list the possible choices, press <TAB>.\n"
#~ "\n"
#~ "To load one of them, write its name and press <ENTER> or\n"
#~ "wait %d seconds for default boot.\n"
#~ "\n"
#~ msgstr ""
#~ "Tervetuloa SILO kayttojarjestelmanvalitsijaan!\n"
#~ "\n"
#~ "Listataksesi mahdolliset valinnat paina <TAB>.\n"
#~ "\n"
#~ "Ladataksesi jonkun niista kirjoita sen nimi ja paina <ENTER>\n"
#~ "tai odota %d sekuntia oletuskaynnistysta.\n"
#~ "\n"

#~ msgid "SILO main options"
#~ msgstr "SILOn p��asetukset"

#~ msgid ""
#~ "Here are the following entries in SILO.\n"
#~ "You can add some more or change the existing ones."
#~ msgstr ""
#~ "T�ss� ovat SILO:n asetustietueet.\n"
#~ "Voit lis�t� uusia tai muuttaa olemassaolevia."

#~ msgid "This label is already in use"
#~ msgstr "Otsikko on jo k�yt�ss�"

#~ msgid "Installation of SILO failed. The following error occured:"
#~ msgstr "SILO:n asennus ep�onnistu. Seuraava virhe tapahtui:"

#~ msgid ""
#~ "DrakX will attempt at first to look for one or more PCI\n"
#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
#~ "to use, it will insert it (them)  automatically.\n"
#~ "\n"
#~ "\n"
#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
#~ "doesn't know which driver to use for this card, or if you have no\n"
#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
#~ "will have to select one.\n"
#~ "\n"
#~ "\n"
#~ "After you have selected the driver, DrakX will ask if you\n"
#~ "want to specify options for it. First, try and let the driver\n"
#~ "probe for the hardware: it usually works fine.\n"
#~ "\n"
#~ "\n"
#~ "If not, do not forget the information on your hardware that you\n"
#~ "could get from your documentation or from Windows (if you have it\n"
#~ "on your system), as suggested by the installation guide. These\n"
#~ "are the options you will need to provide to the driver."
#~ msgstr ""
#~ "DrakX yritt�� ensin etsi� yht� tai useampaa PCI\n"
#~ "SCSI-ohjainta. Jos ohjelma l�yt�� ohjaimia ja tiet�� mit�\n"
#~ "ajureita ne k�ytt�v�t ohjaimet otetaan k�ytt��n automaattisesti.\n"
#~ "\n"
#~ "\n"
#~ "Jos SCSI-ohjaimesi on ISA-v�yl�ss�, tai PCI-v�yl�ss�, mutta\n"
#~ "DrakX ei tied� mit� ajuria k�ytt�isi ohjaimelle, tai jos sinulla ei ole\n"
#~ "SCSI ohjaimia ollenkaan, sinulta kysyt��n erikseen onko sinulla\n"
#~ "ohjaimia vai ei. Jos ohjaimia ei ole, vastaa \"Ei\". Jos sinulla on yksi\n"
#~ "tai useampia, vastaa \"Kyll�\". Saat t�m�n j�lkeen listan ajureista, joista\n"
#~ "sinun tulee valita yksi.\n"
#~ "\n"
#~ "\n"
#~ "Valittuasi ajurin DrakX kysyy haluatko m��ritell� ajurille\n"
#~ "optioita. Anna ajurin ensin itse hakea laitteita:\n"
#~ "t�m� toimii yleens� hienosti.\n"
#~ "\n"
#~ "\n"
#~ "Jos t�m�k��n ei toimi �l� unohda tietoja laitteistasi joita voit saada\n"
#~ "ohjeista tai Windowsista (jos sinulla on se asennettuna),\n"
#~ "kuten asennusohje neuvoo. N�m� ovat asetuksia joita sinun tulee\n"
#~ "antaa ajurille."

#~ msgid "Shutting down"
#~ msgstr "Sammutan"

#~ msgid "useless"
#~ msgstr "k�ytt�kelvoton"

#~ msgid "garbage"
#~ msgstr "roskaa"

#~ msgid ""
#~ "Some true type fonts from windows have been found on your computer.\n"
#~ "Do you want to use them? Be sure you have the right to use them under Linux."
#~ msgstr ""
#~ "Joitain Windowsin TrueType kirjasimia l�ytyi j�rjestelm�st�.\n"
#~ "Haluatko k�ytt�� niit�? Varmista ett� sinulla on oikeus k�ytt�� niit� "
#~ "Linuxissa."