# translation of DrakX-bg.po to Bulgarian # Copyright (C) 2000,2003 Free Software Foundation, Inc. # Copyright (c) 2000 Mandriva # Bozhan Boiadzhiev , 2000. # Borislav Aleksandrov , 2003. # Boyan Ivanov , 2003. # # msgid "" msgstr "" "Project-Id-Version: DrakX-bg\n" "POT-Creation-Date: 2005-09-19 21:17+0800\n" "PO-Revision-Date: 2004-09-15 13:27+0200\n" "Last-Translator: Boyan Ivanov \n" "Language-Team: Bulgarian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.0.2\n" #: ../move/move.pm:292 #, fuzzy, c-format msgid "Which USB key do you want to format?" msgstr "Какъв тип информация искате да прибавите" #: ../move/move.pm:296 #, c-format msgid "" "You are about to format a USB device \"%s\". This will delete all data on " "it.\n" "Make sure that the selected device is the USB key you want to format. \n" "We advise you to unplug all other USB storage devices while doing this " "operation." msgstr "" #: ../move/move.pm:448 ../move/move.pm:460 #, c-format msgid "Key is not writable" msgstr "" #: ../move/move.pm:450 #, c-format msgid "" "The USB key seems to have write protection enabled. Please\n" "unplug it, remove write protection, and then plug it again." msgstr "" #: ../move/move.pm:452 #, c-format msgid "Retry" msgstr "Повторение" #: ../move/move.pm:453 ../move/move.pm:497 #, c-format msgid "Continue without USB key" msgstr "" #: ../move/move.pm:462 #, c-format msgid "" "The USB key seems to have write protection enabled, but we can not safely\n" "unplug it now.\n" "\n" "\n" "Click the button to reboot the machine, unplug it, remove write protection,\n" "plug the key again, and launch Mandriva Move again." msgstr "" #: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1332 #, c-format msgid "Reboot" msgstr "Престартира" #: ../move/move.pm:473 #, c-format msgid "" "Your USB key does not have any valid Windows (FAT) partitions.\n" "We need one to continue (beside, it's more standard so that you\n" "will be able to move and access your files from machines\n" "running Windows). Please plug in an USB key containing a\n" "Windows partition instead.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandriva Move as a normal live Mandriva\n" "Operating System." msgstr "" #: ../move/move.pm:483 #, c-format msgid "" "We did not detect any USB key on your system. If you\n" "plug in an USB key now, Mandriva Move will have the ability\n" "to transparently save the data in your home directory and\n" "system wide configuration, for next boot on this computer\n" "or another one. Note: if you plug in a key now, wait several\n" "seconds before detecting again.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandriva Move as a normal live Mandriva\n" "Operating System." msgstr "" #: ../move/move.pm:494 #, c-format msgid "Need a key to save your data" msgstr "" #: ../move/move.pm:496 #, c-format msgid "Detect USB key again" msgstr "" #: ../move/move.pm:517 #, fuzzy, c-format msgid "Setting up USB key" msgstr "Установявам ISA PNP устройства: " #: ../move/move.pm:517 #, fuzzy, c-format msgid "Please wait, setting up system configuration files on USB key..." msgstr "Моля, изберете ниво на сигурност..." #: ../move/move.pm:546 #, c-format msgid "Enter your user information, password will be used for screensaver" msgstr "" #: ../move/move.pm:556 #, fuzzy, c-format msgid "Auto configuration" msgstr "Потребителска настройка" #: ../move/move.pm:556 #, fuzzy, c-format msgid "Please wait, detecting and configuring devices..." msgstr "Моля, изберете ниво на сигурност..." #: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664 #: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:230 #: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404 #: diskdrake/interactive.pm:422 diskdrake/interactive.pm:558 #: diskdrake/interactive.pm:563 diskdrake/smbnfs_gtk.pm:41 do_pkgs.pm:19 #: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:216 install_any.pm:1776 #: install_any.pm:1828 install_steps.pm:81 install_steps_interactive.pm:37 #: interactive/http.pm:117 interactive/http.pm:118 network/ndiswrapper.pm:27 #: network/ndiswrapper.pm:42 network/ndiswrapper.pm:89 #: network/ndiswrapper.pm:101 network/netconnect.pm:845 #: network/netconnect.pm:944 network/netconnect.pm:948 #: network/netconnect.pm:952 network/netconnect.pm:957 #: network/netconnect.pm:1102 network/netconnect.pm:1106 #: network/netconnect.pm:1225 network/netconnect.pm:1230 #: network/netconnect.pm:1250 network/netconnect.pm:1404 #: network/thirdparty.pm:319 network/thirdparty.pm:326 #: network/thirdparty.pm:370 network/thirdparty.pm:372 #: network/thirdparty.pm:393 network/thirdparty.pm:417 #: printer/printerdrake.pm:244 printer/printerdrake.pm:251 #: printer/printerdrake.pm:276 printer/printerdrake.pm:422 #: printer/printerdrake.pm:427 printer/printerdrake.pm:440 #: printer/printerdrake.pm:450 printer/printerdrake.pm:514 #: printer/printerdrake.pm:686 printer/printerdrake.pm:690 #: printer/printerdrake.pm:772 printer/printerdrake.pm:1576 #: printer/printerdrake.pm:1624 printer/printerdrake.pm:1661 #: printer/printerdrake.pm:1706 printer/printerdrake.pm:1710 #: printer/printerdrake.pm:1724 printer/printerdrake.pm:1816 #: printer/printerdrake.pm:1897 printer/printerdrake.pm:1901 #: printer/printerdrake.pm:1905 printer/printerdrake.pm:1954 #: printer/printerdrake.pm:2012 printer/printerdrake.pm:2016 #: printer/printerdrake.pm:2030 printer/printerdrake.pm:2150 #: printer/printerdrake.pm:2154 printer/printerdrake.pm:2197 #: printer/printerdrake.pm:2272 printer/printerdrake.pm:2290 #: printer/printerdrake.pm:2299 printer/printerdrake.pm:2308 #: printer/printerdrake.pm:2319 printer/printerdrake.pm:2383 #: printer/printerdrake.pm:2478 printer/printerdrake.pm:3037 #: printer/printerdrake.pm:3321 printer/printerdrake.pm:3327 #: printer/printerdrake.pm:3891 printer/printerdrake.pm:3895 #: printer/printerdrake.pm:3899 printer/printerdrake.pm:4360 #: printer/printerdrake.pm:4601 printer/printerdrake.pm:4629 #: printer/printerdrake.pm:4706 printer/printerdrake.pm:4772 #: printer/printerdrake.pm:4892 standalone/drakTermServ:394 #: standalone/drakTermServ:464 standalone/drakTermServ:473 #: standalone/drakTermServ:774 standalone/drakTermServ:781 #: standalone/drakTermServ:802 standalone/drakTermServ:849 #: standalone/drakTermServ:1095 standalone/drakTermServ:1572 #: standalone/drakTermServ:1588 standalone/drakTermServ:1593 #: standalone/drakTermServ:1601 standalone/drakTermServ:1613 #: standalone/drakTermServ:1634 standalone/drakauth:36 #: standalone/drakbackup:498 standalone/drakbackup:612 #: standalone/drakbackup:1093 standalone/drakbackup:1125 #: standalone/drakbackup:1646 standalone/drakbackup:1802 #: standalone/drakbackup:2427 standalone/drakbackup:4116 #: standalone/drakbackup:4336 standalone/drakclock:124 #: standalone/drakconnect:676 standalone/drakconnect:680 #: standalone/drakconnect:685 standalone/drakconnect:700 #: standalone/drakfont:210 standalone/drakfont:223 standalone/drakfont:261 #: standalone/drakgw:50 standalone/drakgw:188 standalone/drakhosts:98 #: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260 #: standalone/draknfs:306 standalone/draknfs:609 standalone/draknfs:616 #: standalone/draknfs:623 standalone/drakroam:33 standalone/draksambashare:379 #: standalone/draksambashare:383 standalone/draksambashare:386 #: standalone/draksambashare:389 standalone/draksambashare:449 #: standalone/draksambashare:473 standalone/draksambashare:547 #: standalone/draksambashare:629 standalone/draksambashare:696 #: standalone/draksambashare:796 standalone/draksambashare:803 #: standalone/draksambashare:938 standalone/draksambashare:1129 #: standalone/draksambashare:1138 standalone/draksambashare:1147 #: standalone/draksambashare:1168 standalone/draksambashare:1177 #: standalone/draksambashare:1186 standalone/draksambashare:1206 #: standalone/draksambashare:1214 standalone/draksambashare:1226 #: standalone/draksplash:162 standalone/drakxtv:107 #: standalone/finish-install:49 standalone/logdrake:171 #: standalone/logdrake:440 standalone/logdrake:445 standalone/scannerdrake:59 #: standalone/scannerdrake:202 standalone/scannerdrake:261 #: standalone/scannerdrake:715 standalone/scannerdrake:726 #: standalone/scannerdrake:865 standalone/scannerdrake:876 #: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121 #, c-format msgid "Error" msgstr "Грешка" #: ../move/move.pm:605 install_steps.pm:82 #, c-format msgid "" "An error occurred, but I do not know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "Появи се грешка, но не знам как да се справя с нея деликатно.\n" "Можете да продължите на свой риск." #: ../move/move.pm:660 install_steps_interactive.pm:37 #, c-format msgid "An error occurred" msgstr "Появи се грешка" #: ../move/move.pm:666 #, c-format msgid "" "An error occurred:\n" "\n" "\n" "%s\n" "\n" "This may come from corrupted system configuration files\n" "on the USB key, in this case removing them and then\n" "rebooting Mandriva Move would fix the problem. To do\n" "so, click on the corresponding button.\n" "\n" "\n" "You may also want to reboot and remove the USB key, or\n" "examine its contents under another OS, or even have\n" "a look at log files in console #3 and #4 to try to\n" "guess what's happening." msgstr "" #: ../move/move.pm:681 #, fuzzy, c-format msgid "Remove system config files" msgstr "Да премахна ли loopback файла ?" #: ../move/move.pm:682 #, c-format msgid "Simply reboot" msgstr "" #: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96 #, c-format msgid "You can only run with no CDROM support" msgstr "" #: ../move/tree/mdk_totem:71 #, fuzzy, c-format msgid "Kill those programs" msgstr "достъп до X програми" #: ../move/tree/mdk_totem:72 #, fuzzy, c-format msgid "No CDROM support" msgstr "Подръжка на радио:" #: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92 #: diskdrake/interactive.pm:1052 diskdrake/interactive.pm:1062 #: diskdrake/interactive.pm:1115 #, c-format msgid "Read carefully!" msgstr "Прочетете внимателно !" #: ../move/tree/mdk_totem:77 #, c-format msgid "" "You can not use another CDROM when the following programs are running: \n" "%s" msgstr "" #: ../move/tree/mdk_totem:101 #, c-format msgid "Copying to memory to allow removing the CDROM" msgstr "" #: Xconfig/card.pm:13 #, c-format msgid "256 kB" msgstr "256 КБ" #: Xconfig/card.pm:14 #, c-format msgid "512 kB" msgstr "512 КБ" #: Xconfig/card.pm:15 #, c-format msgid "1 MB" msgstr "1 МБ" #: Xconfig/card.pm:16 #, c-format msgid "2 MB" msgstr "2 МБ" #: Xconfig/card.pm:17 #, c-format msgid "4 MB" msgstr "4 МБ" #: Xconfig/card.pm:18 #, c-format msgid "8 MB" msgstr "8 МБ" #: Xconfig/card.pm:19 #, c-format msgid "16 MB" msgstr "16 МБ" #: Xconfig/card.pm:20 #, c-format msgid "32 MB" msgstr "32 МБ" #: Xconfig/card.pm:21 #, c-format msgid "64 MB or more" msgstr "64 МБ или повече" #: Xconfig/card.pm:155 #, c-format msgid "X server" msgstr "X сървър" #: Xconfig/card.pm:156 #, c-format msgid "Choose an X server" msgstr "Изберете X сървър" #: Xconfig/card.pm:188 #, c-format msgid "Multi-head configuration" msgstr "" #: Xconfig/card.pm:189 #, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" #: Xconfig/card.pm:258 #, fuzzy, c-format msgid "Can not install Xorg package: %s" msgstr "Инсталиране на пакета %s" #: Xconfig/card.pm:268 #, c-format msgid "Select the memory size of your graphics card" msgstr "Изберете капацитет на паметта на графичната си карта" #: Xconfig/card.pm:357 #, c-format msgid "Xorg configuration" msgstr "Настройка на Xorg" #: Xconfig/card.pm:359 #, c-format msgid "Which configuration of Xorg do you want to have?" msgstr "Коя настройка на Xorg искате да имате ?" #: Xconfig/card.pm:392 #, c-format msgid "Configure all heads independently" msgstr "Настройка на всички глави по отделно" #: Xconfig/card.pm:393 #, c-format msgid "Use Xinerama extension" msgstr "Използвай разширението Xinerama" #: Xconfig/card.pm:398 #, c-format msgid "Configure only card \"%s\"%s" msgstr "Настройка само на карта \"%s\"(%s)" #: Xconfig/card.pm:410 Xconfig/various.pm:23 #, c-format msgid "Xorg %s" msgstr "Xorg %s" #: Xconfig/card.pm:417 Xconfig/various.pm:22 #, c-format msgid "Xorg %s with 3D hardware acceleration" msgstr "Xorg %s с хардуерно 3D ускорение" #: Xconfig/card.pm:419 #, c-format msgid "Your card can have 3D hardware acceleration support with Xorg %s." msgstr "Картата ви може да има поддръжка на хардуерно 3D ускорение в Xorg %s." #: Xconfig/card.pm:425 #, c-format msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration" msgstr "Xorg %s с ЕКСПЕРИМЕНТАЛНО хардуерно 3D ускорение" #: Xconfig/card.pm:427 #, c-format msgid "" "Your card can have 3D hardware acceleration support with Xorg %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "Картата ви може да има поддръжка на хардуерно 3D ускорение с Xorg %s.\n" "ОТБЕЛЕЖЕТЕ, ЧЕ ТОВА Е ЕКСПЕРИМЕНТАЛНА ПОДДРЪЖКА И КОМПЮТЪРЪТ ВИ МОЖЕ ДА " "ЗАБИЕ." #: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:973 #, c-format msgid "Custom" msgstr "Клиентска" #: Xconfig/main.pm:127 diskdrake/dav.pm:26 help.pm:14 #: install_steps_interactive.pm:86 install_steps_interactive.pm:1332 #: printer/printerdrake.pm:882 printer/printerdrake.pm:899 #: printer/printerdrake.pm:4701 printer/printerdrake.pm:5165 #: standalone/drakhosts:263 standalone/drakroam:230 standalone/draksplash:93 #: standalone/logdrake:176 standalone/net_applet:103 #: standalone/scannerdrake:477 #, c-format msgid "Quit" msgstr "Изход" #: Xconfig/main.pm:129 #, c-format msgid "Graphic Card" msgstr "Графична карта" #: Xconfig/main.pm:132 Xconfig/monitor.pm:110 #, c-format msgid "Monitor" msgstr "Монитор" #: Xconfig/main.pm:135 Xconfig/resolution_and_depth.pm:287 #, c-format msgid "Resolution" msgstr "Разделителна способност" #: Xconfig/main.pm:138 #, c-format msgid "Test" msgstr "Тест" #: Xconfig/main.pm:143 diskdrake/dav.pm:65 diskdrake/interactive.pm:448 #: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79 #: printer/printerdrake.pm:1125 standalone/drakfont:491 #: standalone/drakfont:554 #, c-format msgid "Options" msgstr "Опции" #: Xconfig/main.pm:178 #, c-format msgid "Your Xorg configuration file is broken, we will ignore it." msgstr "" #: Xconfig/main.pm:196 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "Да запазя ли промените ?\n" "Текущата настройка е:\n" "\n" "%s" #: Xconfig/monitor.pm:111 #, fuzzy, c-format msgid "Choose a monitor for head #%d" msgstr "Изберете монитор" #: Xconfig/monitor.pm:111 #, c-format msgid "Choose a monitor" msgstr "Изберете монитор" #: Xconfig/monitor.pm:117 #, c-format msgid "Plug'n Play" msgstr "Plug & Play" #: Xconfig/monitor.pm:118 mouse.pm:49 #, c-format msgid "Generic" msgstr "Общ" #: Xconfig/monitor.pm:119 standalone/drakconnect:591 standalone/harddrake2:54 #: standalone/harddrake2:88 #, c-format msgid "Vendor" msgstr "Производител" #: Xconfig/monitor.pm:129 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "Проба за Plug & Play е неуспешна. Моля, изберете правилен монитор" #: Xconfig/monitor.pm:137 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "Двата критични параметъра са вертикалната скорост на възстановяване, която " "отразява скоростта, \n" "с която целият екран се възстановява, и най-важното - хоризонталната\n" "синхронизационна скорост, която отразява скоростта, с която се изписват " "хоризонталните линии.\n" "\n" "МНОГО Е ВАЖНО да изберете такава синхронизационната скорост, която да " "отговаря на възможностите на Вашия монитор - в противен случай можете да " "повредите монитора си.\n" " Ако имате някакви съмнения, изберете консервативна настройка." #: Xconfig/monitor.pm:144 #, c-format msgid "Horizontal refresh rate" msgstr "Хоризонтална скорост на възстановяване" #: Xconfig/monitor.pm:145 #, c-format msgid "Vertical refresh rate" msgstr "Вертикална скорост на възстановяване" #: Xconfig/resolution_and_depth.pm:10 #, c-format msgid "256 colors (8 bits)" msgstr "256 цвята (8 бита)" #: Xconfig/resolution_and_depth.pm:11 #, c-format msgid "32 thousand colors (15 bits)" msgstr "32 хиляди цвята (15 бита)" #: Xconfig/resolution_and_depth.pm:12 #, c-format msgid "65 thousand colors (16 bits)" msgstr "65 хиляди цвята (16 бита)" #: Xconfig/resolution_and_depth.pm:13 #, c-format msgid "16 million colors (24 bits)" msgstr "16 милиона цвята (24 бита)" #: Xconfig/resolution_and_depth.pm:127 #, c-format msgid "Resolutions" msgstr "Разделителна способност" #: Xconfig/resolution_and_depth.pm:309 diskdrake/hd_gtk.pm:336 #: install_steps_gtk.pm:288 mouse.pm:168 services.pm:162 #: standalone/drakbackup:1584 standalone/drakperm:250 #, c-format msgid "Other" msgstr "Друга" #: Xconfig/resolution_and_depth.pm:358 #, c-format msgid "Choose the resolution and the color depth" msgstr "Изберете разделителна способност и дълбочина на цветовете" #: Xconfig/resolution_and_depth.pm:359 #, c-format msgid "Graphics card: %s" msgstr "Графична карта: %s" #: Xconfig/resolution_and_depth.pm:373 interactive.pm:119 interactive.pm:436 #: interactive/http.pm:103 interactive/http.pm:156 interactive/newt.pm:321 #: interactive/stdio.pm:39 interactive/stdio.pm:142 interactive/stdio.pm:143 #: standalone/drakTermServ:195 standalone/drakTermServ:515 #: standalone/drakbackup:1350 standalone/drakbackup:3973 #: standalone/drakbackup:4033 standalone/drakbackup:4077 #: standalone/drakconnect:158 standalone/drakconnect:852 #: standalone/drakconnect:939 standalone/drakconnect:1030 #: standalone/drakfont:575 standalone/drakfont:585 standalone/draksplash:173 #: standalone/drakups:212 standalone/net_monitor:339 ugtk2.pm:392 ugtk2.pm:490 #: ugtk2.pm:899 ugtk2.pm:922 #, c-format msgid "Ok" msgstr "Ok" #: Xconfig/resolution_and_depth.pm:373 diskdrake/smbnfs_gtk.pm:80 help.pm:89 #: help.pm:444 install_steps_gtk.pm:455 install_steps_interactive.pm:429 #: install_steps_interactive.pm:840 interactive.pm:120 interactive.pm:437 #: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318 #: interactive/stdio.pm:39 interactive/stdio.pm:142 #: printer/printerdrake.pm:3971 standalone/drakautoinst:215 #: standalone/drakbackup:1350 standalone/drakbackup:3899 #: standalone/drakbackup:3903 standalone/drakbackup:3961 #: standalone/drakconnect:157 standalone/drakconnect:937 #: standalone/drakconnect:1029 standalone/drakfont:585 standalone/drakfont:663 #: standalone/drakfont:740 standalone/draksplash:173 standalone/drakups:219 #: standalone/logdrake:176 standalone/net_monitor:338 ugtk2.pm:386 #: ugtk2.pm:488 ugtk2.pm:497 ugtk2.pm:899 #, c-format msgid "Cancel" msgstr "Отказ" #: Xconfig/resolution_and_depth.pm:373 diskdrake/hd_gtk.pm:150 #: install_steps_gtk.pm:232 install_steps_gtk.pm:617 interactive.pm:567 #: interactive/gtk.pm:682 interactive/gtk.pm:684 standalone/drakTermServ:284 #: standalone/drakbackup:3895 standalone/drakbug:105 #: standalone/drakconnect:153 standalone/drakconnect:236 #: standalone/drakfont:510 standalone/draknfs:206 standalone/drakperm:133 #: standalone/draksambashare:314 standalone/draksec:344 standalone/draksec:346 #: standalone/draksec:364 standalone/draksec:366 ugtk2.pm:1031 ugtk2.pm:1032 #, c-format msgid "Help" msgstr "Помощ" #: Xconfig/test.pm:30 #, c-format msgid "Test of the configuration" msgstr "Проверка на настройката" #: Xconfig/test.pm:31 #, c-format msgid "Do you want to test the configuration?" msgstr "Искате ли да тествате настройките?" #: Xconfig/test.pm:31 #, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "" "Внимание: тестването на тази графична карта може да замрази компютъра ви" #: Xconfig/test.pm:69 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" "Появи се грешка:\n" "%s\n" "Опитайте да промените някой параметри" #: Xconfig/test.pm:129 #, c-format msgid "Leaving in %d seconds" msgstr "Позволено в %d секунди" #: Xconfig/test.pm:129 #, c-format msgid "Is this the correct setting?" msgstr "Всичко правилно ли е ?" #: Xconfig/various.pm:29 #, c-format msgid "Keyboard layout: %s\n" msgstr "Тип клавиатура: %s\n" #: Xconfig/various.pm:30 #, c-format msgid "Mouse type: %s\n" msgstr "Тип мишка: %s\n" #: Xconfig/various.pm:31 #, c-format msgid "Mouse device: %s\n" msgstr "Устройство на мишката: %s\n" #: Xconfig/various.pm:33 #, c-format msgid "Monitor: %s\n" msgstr "Монитор: %s\n" #: Xconfig/various.pm:34 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Хоризонтална синхронизация на монитора: %s\n" #: Xconfig/various.pm:35 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Вертикално опресняване на монитора: %s\n" #: Xconfig/various.pm:37 #, c-format msgid "Graphics card: %s\n" msgstr "Графична карта: %s\n" #: Xconfig/various.pm:38 #, c-format msgid "Graphics memory: %s kB\n" msgstr "Графична памет: %s kB\n" #: Xconfig/various.pm:40 #, c-format msgid "Color depth: %s\n" msgstr "Дълбочина на цвета: %s\n" #: Xconfig/various.pm:41 #, c-format msgid "Resolution: %s\n" msgstr "Разделителна способност: %s\n" #: Xconfig/various.pm:43 #, c-format msgid "Xorg driver: %s\n" msgstr "Xorg драйвер: %s\n" #: Xconfig/various.pm:72 #, c-format msgid "Graphical interface at startup" msgstr "X при стартиране на системата" #: Xconfig/various.pm:74 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface " "(Xorg) upon booting.\n" "Would you like Xorg to start when you reboot?" msgstr "" "Компютъра ви може автоматично, да влезе в X при стартиране.\n" "Искате ли X да се стартира, когато рестартирате системата?" #: Xconfig/various.pm:87 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" #: Xconfig/various.pm:99 #, c-format msgid "What norm is your TV using?" msgstr "Какъв е типът на използваният TV ?" #: Xconfig/xfree.pm:648 #, c-format msgid "" "_:weird aspect ratio\n" "other" msgstr "" #: any.pm:142 harddrake/sound.pm:192 interactive.pm:474 pkgs.pm:473 #: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68 #: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:356 #: standalone/service_harddrake:206 #, c-format msgid "Please wait" msgstr "Моля изчакайте" #: any.pm:142 #, c-format msgid "Bootloader installation in progress" msgstr "Инсталация на Bootloader" #: any.pm:153 #, c-format msgid "" "LILO wants to assign a new Volume ID to drive %s. However, changing\n" "the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows " "error.\n" "This caution does not apply to Windows 95 or 98, or to NT data disks.\n" "\n" "Assign a new Volume ID?" msgstr "" #: any.pm:164 #, c-format msgid "Installation of bootloader failed. The following error occurred:" msgstr "Инсталацията на bootloader провалена. Появи се следната грешка:" #: any.pm:170 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you do not see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "Може би се нуждаете да промените Open Firmware стартовото устройство,\n" " за да пуснете зареждащата програма. Ако не виждате подсказката и при\n" " рестартиране, задръжте Command-Option-O-F при рестартиране и въведете:\n" " setenv boot-device %s,\\\\:tbxi\n" " След което напишете: shut-down\n" "При следващото рестартиране би трябвало да видете подсказката." #: any.pm:208 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" "Избахте да инсталирате bootloader на дял\n" "Това предполага,че вече имате bootloader на диска(например: System " "Commander).\n" "\n" "От кой диск зареждате ?" #: any.pm:231 help.pm:739 #, c-format msgid "First sector of drive (MBR)" msgstr "Първият сектор от драйва (MBR)" #: any.pm:232 #, c-format msgid "First sector of the root partition" msgstr "Първи сектор от стартиращия се дял" #: any.pm:234 #, c-format msgid "On Floppy" msgstr "Запазва на дискета" #: any.pm:236 help.pm:739 printer/printerdrake.pm:4357 #, c-format msgid "Skip" msgstr "Прескача" #: any.pm:240 #, c-format msgid "LILO/grub Installation" msgstr "LILO/grub инсталация" #: any.pm:241 #, c-format msgid "Where do you want to install the bootloader?" msgstr "Къде искате да инсталирате bootloader-а?" #: any.pm:267 standalone/drakboot:269 #, c-format msgid "Boot Style Configuration" msgstr "Настройка на начина на стартиране" #: any.pm:269 any.pm:270 any.pm:303 any.pm:304 #, c-format msgid "Bootloader main options" msgstr "Опции на зареждащата програма" #: any.pm:275 #, c-format msgid "Give the ram size in MB" msgstr "Дава размера RAM-памет в Mb" #: any.pm:277 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "Опцията ``Ограничи опциите от командния ред'' е безполезна без парола" #: any.pm:278 any.pm:615 authentication.pm:181 #, c-format msgid "The passwords do not match" msgstr "Паролите не съвпадат" #: any.pm:278 any.pm:615 authentication.pm:181 diskdrake/interactive.pm:1326 #, c-format msgid "Please try again" msgstr "Моля, опитайте отново" #: any.pm:283 any.pm:308 #, c-format msgid "Bootloader to use" msgstr "Използвана зареждащата програма" #: any.pm:285 any.pm:310 #, c-format msgid "Boot device" msgstr "Стартиращо устройство" #: any.pm:287 #, c-format msgid "Delay before booting default image" msgstr "Забавяне преди стартирането на подразбиращият образ" #: any.pm:288 #, c-format msgid "Enable ACPI" msgstr "Стартиране от CD " #: any.pm:290 #, fuzzy, c-format msgid "Force no APIC" msgstr "Без APIC" #: any.pm:292 #, fuzzy, c-format msgid "Force No Local APIC" msgstr "Без APIC" #: any.pm:294 any.pm:650 authentication.pm:186 diskdrake/smbnfs_gtk.pm:180 #: network/netconnect.pm:573 printer/printerdrake.pm:1888 #: printer/printerdrake.pm:2009 standalone/drakbackup:1628 #: standalone/drakbackup:3502 standalone/drakups:299 #, c-format msgid "Password" msgstr "Парола" #: any.pm:295 any.pm:651 authentication.pm:187 #, c-format msgid "Password (again)" msgstr "Парола (отново)" #: any.pm:296 #, c-format msgid "Restrict command line options" msgstr "Ограничи опциите, задавани от командния ред" #: any.pm:296 #, c-format msgid "restrict" msgstr "ограничи" #: any.pm:298 #, c-format msgid "Clean /tmp at each boot" msgstr "Почистване на /tmp при всяко зареждане" #: any.pm:299 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Точен размер на RAM-паметта, ако е необходимо (намерени %d MB)" #: any.pm:309 #, c-format msgid "Init Message" msgstr "Стартово съобщение" #: any.pm:311 #, c-format msgid "Open Firmware Delay" msgstr "Изчакване на Open Firmware" #: any.pm:312 #, c-format msgid "Kernel Boot Timeout" msgstr "Изчакване за стартиране на ядрото" #: any.pm:313 #, c-format msgid "Enable CD Boot?" msgstr "Стартиране от CD ?" #: any.pm:314 #, c-format msgid "Enable OF Boot?" msgstr "Стартиране от OF ?" #: any.pm:315 #, c-format msgid "Default OS?" msgstr "ОС по подразбиране ?" #: any.pm:369 #, c-format msgid "Image" msgstr "Образ" #: any.pm:370 any.pm:380 #, c-format msgid "Root" msgstr "Главен" #: any.pm:371 any.pm:393 #, c-format msgid "Append" msgstr "Допълване" #: any.pm:373 standalone/drakboot:271 standalone/drakboot:275 #, c-format msgid "Video mode" msgstr "Видео режим" #: any.pm:375 #, c-format msgid "Initrd" msgstr "Initrd" #: any.pm:376 #, fuzzy, c-format msgid "Network profile" msgstr "Нов профил..." #: any.pm:385 any.pm:390 any.pm:392 #, c-format msgid "Label" msgstr "Етикет" #: any.pm:387 any.pm:397 harddrake/v4l.pm:368 standalone/draksec:52 #, c-format msgid "Default" msgstr "По подразбиране" #: any.pm:394 #, c-format msgid "Initrd-size" msgstr "Initrd-големина" #: any.pm:396 #, c-format msgid "NoVideo" msgstr "Без графика" #: any.pm:407 #, c-format msgid "Empty label not allowed" msgstr "Празен етикет не е разрешен" #: any.pm:408 #, c-format msgid "You must specify a kernel image" msgstr "Трябва да зададете обаза на ядрото" #: any.pm:408 #, c-format msgid "You must specify a root partition" msgstr "Трябва да зададете кореновият дял" #: any.pm:409 #, c-format msgid "This label is already used" msgstr "Този етикет вече се използва" #: any.pm:423 #, c-format msgid "Which type of entry do you want to add?" msgstr "Какъв тип информация искате да прибавите" #: any.pm:424 #, c-format msgid "Linux" msgstr "Linux" #: any.pm:424 #, c-format msgid "Other OS (SunOS...)" msgstr "Друга ОС (SunOS...)" #: any.pm:425 #, c-format msgid "Other OS (MacOS...)" msgstr "Друга ОС (MacOS...)" #: any.pm:425 #, c-format msgid "Other OS (Windows...)" msgstr "Друга ОС (Windows...)" #: any.pm:453 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "Това са различните записи.\n" "Можете да добавите още или да промените съществуващите." #: any.pm:601 #, c-format msgid "access to X programs" msgstr "достъп до X програми" #: any.pm:602 #, c-format msgid "access to rpm tools" msgstr "достъп до rpm инструменти" #: any.pm:603 #, c-format msgid "allow \"su\"" msgstr "позволява \"su\"" #: any.pm:604 #, c-format msgid "access to administrative files" msgstr "достъп до файлове за администриране" #: any.pm:605 #, c-format msgid "access to network tools" msgstr "достъп до мрежови инструменти" #: any.pm:606 #, c-format msgid "access to compilation tools" msgstr "достъп до инструменти за компилация" #: any.pm:611 #, c-format msgid "(already added %s)" msgstr "(вече прибавих %s)" #: any.pm:616 #, c-format msgid "This password is too simple" msgstr "Тази парола е прекалено проста" #: any.pm:617 #, c-format msgid "Please give a user name" msgstr "Моля, задайте потребителско име" #: any.pm:618 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" "Потребителското име може да включва само малки букви, номера, `-' и `_'" #: any.pm:619 #, c-format msgid "The user name is too long" msgstr "Това име е твърде дълго" #: any.pm:620 #, c-format msgid "This user name has already been added" msgstr "Това потребителско име вече е добавено" #: any.pm:621 any.pm:653 #, c-format msgid "User ID" msgstr "Потребителски номер" #: any.pm:622 any.pm:654 #, c-format msgid "Group ID" msgstr "Номер на група" #: any.pm:625 #, fuzzy, c-format msgid "%s must be a number" msgstr "Настройката %s трябва да е число !" #: any.pm:626 #, c-format msgid "%s should be above 500. Accept anyway?" msgstr "" #: any.pm:631 standalone/draksambashare:1210 #, c-format msgid "Add user" msgstr "Добави потребител" #: any.pm:633 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Въведете потребител\n" "%s" #: any.pm:636 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154 #: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530 #: interactive/http.pm:151 printer/printerdrake.pm:197 #: printer/printerdrake.pm:382 printer/printerdrake.pm:5165 #: standalone/drakbackup:2715 standalone/scannerdrake:668 #: standalone/scannerdrake:818 #, c-format msgid "Done" msgstr "Готово" #: any.pm:637 help.pm:51 #, c-format msgid "Accept user" msgstr "Приеми потребител" #: any.pm:648 #, c-format msgid "Real name" msgstr "Истинско име" #: any.pm:649 standalone/drakbackup:1623 #, c-format msgid "Login name" msgstr "Потебителско име" #: any.pm:652 #, c-format msgid "Shell" msgstr "Шел" #: any.pm:656 #, c-format msgid "Icon" msgstr "Икона" #: any.pm:703 security/l10n.pm:14 #, c-format msgid "Autologin" msgstr "Автоматично влиза" #: any.pm:704 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "" "Мога да настроя компютъра ви за влизане в системата автоматично като някой " "потребител." #: any.pm:705 #, fuzzy, c-format msgid "Use this feature" msgstr "Искате ли да използвате тази особеност?" #: any.pm:706 #, c-format msgid "Choose the default user:" msgstr "Изберете подразбиращ се потребител :" #: any.pm:707 #, c-format msgid "Choose the window manager to run:" msgstr "Изберете мениджър на прозорци за стартиране:" #: any.pm:719 any.pm:787 #, c-format msgid "Please choose a language to use." msgstr "Моля, изберете език за използване." #: any.pm:720 any.pm:788 #, fuzzy, c-format msgid "Language choice" msgstr "ръчно" #: any.pm:748 #, c-format msgid "" "Mandriva Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" "Mandriva Linux може да подържа много езици. Изберете\n" "езиците които искате ад инсталирате. Те ще бъдат налични след\n" "като завърши инсталацията и вие престартирате системата." #: any.pm:751 #, c-format msgid "Multi languages" msgstr "" #: any.pm:767 any.pm:796 help.pm:647 #, c-format msgid "Use Unicode by default" msgstr "Използва уникод по подразбиране" #: any.pm:768 help.pm:647 #, c-format msgid "All languages" msgstr "Избор на език" #: any.pm:840 help.pm:566 help.pm:855 install_steps_interactive.pm:961 #, c-format msgid "Country / Region" msgstr "Страна / Регион" #: any.pm:842 #, c-format msgid "Please choose your country." msgstr "Моля, изберете вашата страна." #: any.pm:844 #, c-format msgid "Here is the full list of available countries" msgstr "Ето пълен списък на достръпните страни" #: any.pm:845 #, fuzzy, c-format msgid "Other Countries" msgstr "Други портовете" #: any.pm:845 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722 #: interactive.pm:397 #, c-format msgid "Advanced" msgstr "Напредничав" #: any.pm:853 #, fuzzy, c-format msgid "Input method:" msgstr "Мрежов метод:" #: any.pm:856 install_any.pm:423 network/netconnect.pm:306 #: network/netconnect.pm:311 network/netconnect.pm:1216 network/wireless.pm:7 #: printer/printerdrake.pm:105 printer/printerdrake.pm:2430 #, c-format msgid "None" msgstr "Без" #: any.pm:973 #, c-format msgid "No sharing" msgstr "Не поделя" #: any.pm:973 #, c-format msgid "Allow all users" msgstr "Позволява на потребители" #: any.pm:977 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" "Искате ли да позволите на потребители да поделят техните директории?\n" "Разрешаването на това ще позволи на потребителите просто да цъкнат на " "\"Поделя\" в konqueror или nautilus.\n" "\n" "\"Клиентска\" позволява за потребител настройка.\n" #: any.pm:989 #, c-format msgid "" "NFS: the traditional Unix file sharing system, with less support on Mac and " "Windows." msgstr "" #: any.pm:992 #, c-format msgid "" "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux " "systems." msgstr "" #: any.pm:1000 #, c-format msgid "" "You can export using NFS or SMB. Please select which you would like to use." msgstr "" "Вие може да експортирате като използвате NFS или SMB. Моля, изберете какво " "искате да използвате." #: any.pm:1025 #, c-format msgid "Launch userdrake" msgstr "Стартира userdrake" #: any.pm:1025 printer/printerdrake.pm:4196 printer/printerdrake.pm:4199 #: printer/printerdrake.pm:4200 printer/printerdrake.pm:4201 #: printer/printerdrake.pm:5483 standalone/drakTermServ:294 #: standalone/drakbackup:4095 standalone/drakbug:126 standalone/drakfont:498 #: standalone/drakids:64 standalone/drakids:77 standalone/drakids:85 #: standalone/draknfs:210 standalone/net_monitor:117 #: standalone/printerdrake:583 #, c-format msgid "Close" msgstr "Затвори" #: any.pm:1027 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" "Споделянето на потребителски директории използва група \"fileshare\".\n" "Може да използвате userdrake,за да добавите потребител към тази група." #: authentication.pm:23 #, c-format msgid "Local file" msgstr "Локален файл" #: authentication.pm:24 #, c-format msgid "LDAP" msgstr "LDAP" #: authentication.pm:25 #, c-format msgid "NIS" msgstr "NIS" #: authentication.pm:26 #, fuzzy, c-format msgid "Smart Card" msgstr "Ethernet карта" #: authentication.pm:27 authentication.pm:152 #, c-format msgid "Windows Domain" msgstr "Windows домейн" #: authentication.pm:28 #, c-format msgid "Active Directory with SFU" msgstr "" #: authentication.pm:29 #, c-format msgid "Active Directory with Winbind" msgstr "" #: authentication.pm:55 #, fuzzy, c-format msgid "Local file:" msgstr "Локални файлове:" #: authentication.pm:55 #, c-format msgid "" "Use local for all authentication and information user tell in local file" msgstr "" #: authentication.pm:56 #, c-format msgid "LDAP:" msgstr "LDAP:" #: authentication.pm:56 #, c-format msgid "" "Tells your computer to use LDAP for some or all authentication. LDAP " "consolidates certain types of information within your organization." msgstr "" #: authentication.pm:57 #, c-format msgid "NIS:" msgstr "NIS:" #: authentication.pm:57 #, c-format msgid "" "Allows you to run a group of computers in the same Network Information " "Service domain with a common password and group file." msgstr "" #: authentication.pm:58 #, c-format msgid "Windows Domain:" msgstr "Windows домейн:" #: authentication.pm:58 #, c-format msgid "" "iWinbind allows the system to retrieve information and authenticate users in " "a Windows domain." msgstr "" #: authentication.pm:59 #, c-format msgid "Active Directory with SFU:" msgstr "" #: authentication.pm:59 #, c-format msgid "With Kerberos and Ldap for authentication in Active Directory Server " msgstr "" #: authentication.pm:60 #, c-format msgid "Active Directory with Winbind:" msgstr "" #: authentication.pm:60 #, c-format msgid "" "Winbind allows the system to authenticate users in a Windows Active " "Directory Server." msgstr "" #: authentication.pm:85 #, c-format msgid "Authentication LDAP" msgstr "LDAP ауторизация" #: authentication.pm:86 #, c-format msgid "LDAP Base dn" msgstr "LDAP Базов dn" #: authentication.pm:87 share/compssUsers.pl:102 #, c-format msgid "LDAP Server" msgstr "LDAP сървър" #: authentication.pm:100 fsedit.pm:23 #, c-format msgid "simple" msgstr "прост" #: authentication.pm:101 #, c-format msgid "TLS" msgstr "TLS" #: authentication.pm:102 #, c-format msgid "SSL" msgstr "SSL" #: authentication.pm:103 #, c-format msgid "security layout (SASL/Kerberos)" msgstr "" #: authentication.pm:110 authentication.pm:148 #, fuzzy, c-format msgid "Authentication Active Directory" msgstr "идентификация" #: authentication.pm:111 diskdrake/smbnfs_gtk.pm:181 #, c-format msgid "Domain" msgstr "Домейн" #: authentication.pm:113 diskdrake/dav.pm:63 help.pm:146 #: printer/printerdrake.pm:141 share/compssUsers.pl:82 #: standalone/drakTermServ:269 #, c-format msgid "Server" msgstr "Сървър" #: authentication.pm:114 #, fuzzy, c-format msgid "LDAP users database" msgstr "Сървър, Бази-данни" #: authentication.pm:115 #, c-format msgid "Use Anonymous BIND " msgstr "" #: authentication.pm:116 #, c-format msgid "LDAP user allowed to browse the Active Directory" msgstr "" #: authentication.pm:117 #, fuzzy, c-format msgid "Password for user" msgstr "Изисква парола" #: authentication.pm:129 #, c-format msgid "Authentication NIS" msgstr "NIS идентификация" #: authentication.pm:130 #, c-format msgid "NIS Domain" msgstr "NIS домейн" #: authentication.pm:131 #, c-format msgid "NIS Server" msgstr "NIS сървър" #: authentication.pm:136 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" #: authentication.pm:148 #, c-format msgid "Authentication Windows Domain" msgstr "Идентификация на Windows Домейн" #: authentication.pm:150 #, c-format msgid "Active Directory Realm " msgstr "" #: authentication.pm:153 #, c-format msgid "Domain Admin User Name" msgstr "Име на администратор на домейн" #: authentication.pm:154 #, c-format msgid "Domain Admin Password" msgstr "Парола за администратор на домейн" #: authentication.pm:170 #, c-format msgid "Set administrator (root) password and network authentication methods" msgstr "" #: authentication.pm:171 #, fuzzy, c-format msgid "Set administrator (root) password" msgstr "Въведете парола за root" #: authentication.pm:172 standalone/drakvpn:1111 #, fuzzy, c-format msgid "Authentication method" msgstr "идентификация" #. -PO: keep this short or else the buttons will not fit in the window #: authentication.pm:177 help.pm:722 #, c-format msgid "No password" msgstr "Без парола" #: authentication.pm:183 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "Паролата е прекалено проста (трябва да бъде дълга поне %d символа)" #: authentication.pm:188 network/netconnect.pm:311 network/netconnect.pm:574 #: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481 #, c-format msgid "Authentication" msgstr "Идентификация" #: authentication.pm:307 #, c-format msgid "Can not use broadcast with no NIS domain" msgstr "Не можете да използвате broadcast без NIS домейн" # NOTE: this message will be displayed at boot time; that is # only the ascii charset will be available on most machines # so use only 7bit for this message (and do transliteration or # leave it in English, as it is the best for your language) # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: bootloader.pm:764 #, c-format msgid "" "Welcome to the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait for default boot.\n" "\n" msgstr "" #: bootloader.pm:904 #, c-format msgid "LILO with graphical menu" msgstr "LILO с графично меню" #: bootloader.pm:905 #, c-format msgid "LILO with text menu" msgstr "LILO с текстово меню" #: bootloader.pm:906 #, c-format msgid "GRUB with graphical menu" msgstr "" #: bootloader.pm:907 #, c-format msgid "GRUB with text menu" msgstr "" #: bootloader.pm:908 #, c-format msgid "Yaboot" msgstr "Yaboot" #: bootloader.pm:985 #, c-format msgid "not enough room in /boot" msgstr "няма достатъчно място за /boot" #: bootloader.pm:1475 #, c-format msgid "You can not install the bootloader on a %s partition\n" msgstr "Не можете да инсталирате bootloader на дяла %s\n" #: bootloader.pm:1515 #, c-format msgid "" "Your bootloader configuration must be updated because partition has been " "renumbered" msgstr "" #: bootloader.pm:1528 #, c-format msgid "" "The bootloader can not be installed correctly. You have to boot rescue and " "choose \"%s\"" msgstr "" #: bootloader.pm:1529 #, fuzzy, c-format msgid "Re-install Boot Loader" msgstr "Инсталиране на bootloader" #: common.pm:131 #, c-format msgid "KB" msgstr "КБ" #: common.pm:131 #, c-format msgid "MB" msgstr "МБ" #: common.pm:131 #, c-format msgid "GB" msgstr "ГБ" #: common.pm:139 #, c-format msgid "TB" msgstr "ТБ" #: common.pm:147 #, c-format msgid "%d minutes" msgstr "%d минути" #: common.pm:149 #, c-format msgid "1 minute" msgstr "1 минута" #: common.pm:151 #, c-format msgid "%d seconds" msgstr "%d секунди" #: common.pm:257 #, c-format msgid "kdesu missing" msgstr "липсва kdesu" #: common.pm:260 #, c-format msgid "consolehelper missing" msgstr "липсва помощ на конзола" #: crypto.pm:13 crypto.pm:48 lang.pm:207 network/adsl_consts.pm:66 #: network/adsl_consts.pm:75 network/adsl_consts.pm:84 #, c-format msgid "Austria" msgstr "Австрия" #: crypto.pm:14 crypto.pm:47 lang.pm:208 standalone/drakxtv:48 #, c-format msgid "Australia" msgstr "Австралия" #: crypto.pm:15 crypto.pm:49 lang.pm:214 network/adsl_consts.pm:93 #: network/adsl_consts.pm:102 network/adsl_consts.pm:114 #: network/adsl_consts.pm:123 network/netconnect.pm:44 #, c-format msgid "Belgium" msgstr "Белгия" #: crypto.pm:16 crypto.pm:50 lang.pm:223 network/adsl_consts.pm:132 #: network/adsl_consts.pm:143 network/adsl_consts.pm:152 #: network/adsl_consts.pm:161 #, c-format msgid "Brazil" msgstr "Бразилия" #: crypto.pm:17 crypto.pm:51 lang.pm:230 #, c-format msgid "Canada" msgstr "Канада" #: crypto.pm:18 crypto.pm:74 lang.pm:235 network/adsl_consts.pm:891 #: network/adsl_consts.pm:900 network/adsl_consts.pm:911 #, c-format msgid "Switzerland" msgstr "Швейцария" #: crypto.pm:19 lang.pm:242 #, c-format msgid "Costa Rica" msgstr "Коста Рика" #: crypto.pm:20 crypto.pm:52 lang.pm:248 network/adsl_consts.pm:368 #, c-format msgid "Czech Republic" msgstr "Чешка Република" #: crypto.pm:21 crypto.pm:57 lang.pm:249 network/adsl_consts.pm:499 #: network/adsl_consts.pm:508 #, c-format msgid "Germany" msgstr "Германия" #: crypto.pm:22 crypto.pm:53 lang.pm:251 network/adsl_consts.pm:378 #, c-format msgid "Denmark" msgstr "Дания" #: crypto.pm:23 crypto.pm:54 lang.pm:256 #, c-format msgid "Estonia" msgstr "Естония" #: crypto.pm:24 crypto.pm:72 lang.pm:260 network/adsl_consts.pm:759 #: network/adsl_consts.pm:770 network/adsl_consts.pm:781 #: network/adsl_consts.pm:792 network/adsl_consts.pm:801 #: network/adsl_consts.pm:810 network/adsl_consts.pm:819 #: network/adsl_consts.pm:828 network/adsl_consts.pm:837 #: network/adsl_consts.pm:846 network/adsl_consts.pm:855 #: network/adsl_consts.pm:864 network/adsl_consts.pm:873 #, c-format msgid "Spain" msgstr "Испания" #: crypto.pm:25 crypto.pm:55 lang.pm:262 network/adsl_consts.pm:387 #, c-format msgid "Finland" msgstr "Финландия" #: crypto.pm:26 crypto.pm:56 lang.pm:267 network/adsl_consts.pm:396 #: network/adsl_consts.pm:408 network/adsl_consts.pm:420 #: network/adsl_consts.pm:431 network/adsl_consts.pm:442 #: network/adsl_consts.pm:454 network/adsl_consts.pm:466 #: network/adsl_consts.pm:477 network/adsl_consts.pm:488 #: network/netconnect.pm:41 #, c-format msgid "France" msgstr "Франция" #: crypto.pm:27 crypto.pm:58 lang.pm:280 network/adsl_consts.pm:519 #, c-format msgid "Greece" msgstr "Гърция" #: crypto.pm:28 crypto.pm:59 lang.pm:291 network/adsl_consts.pm:528 #, c-format msgid "Hungary" msgstr "Унгария" #: crypto.pm:29 crypto.pm:60 lang.pm:293 network/adsl_consts.pm:537 #: standalone/drakxtv:47 #, c-format msgid "Ireland" msgstr "Ирландия" #: crypto.pm:30 crypto.pm:61 lang.pm:294 network/adsl_consts.pm:546 #, c-format msgid "Israel" msgstr "Израел" #: crypto.pm:31 crypto.pm:62 lang.pm:300 network/adsl_consts.pm:557 #: network/adsl_consts.pm:569 network/adsl_consts.pm:580 #: network/adsl_consts.pm:589 network/netconnect.pm:43 standalone/drakxtv:47 #, c-format msgid "Italy" msgstr "Италия" #: crypto.pm:32 crypto.pm:63 lang.pm:303 #, c-format msgid "Japan" msgstr "Япония" #: crypto.pm:33 crypto.pm:64 lang.pm:352 network/adsl_consts.pm:620 #: network/adsl_consts.pm:629 network/adsl_consts.pm:638 #: network/adsl_consts.pm:647 network/netconnect.pm:42 #, c-format msgid "Netherlands" msgstr "Холандия" #: crypto.pm:34 crypto.pm:66 lang.pm:353 network/adsl_consts.pm:656 #: network/adsl_consts.pm:661 network/adsl_consts.pm:666 #: network/adsl_consts.pm:671 network/adsl_consts.pm:676 #: network/adsl_consts.pm:681 network/adsl_consts.pm:686 #, c-format msgid "Norway" msgstr "Норвегия" #: crypto.pm:35 crypto.pm:65 lang.pm:357 #, c-format msgid "New Zealand" msgstr "Нова Зеландия" #: crypto.pm:36 crypto.pm:67 lang.pm:365 network/adsl_consts.pm:693 #: network/adsl_consts.pm:704 #, c-format msgid "Poland" msgstr "Полша" #: crypto.pm:37 crypto.pm:68 lang.pm:370 network/adsl_consts.pm:716 #, c-format msgid "Portugal" msgstr "Португалия" #: crypto.pm:38 crypto.pm:69 lang.pm:376 network/adsl_consts.pm:725 #, c-format msgid "Russia" msgstr "Русия" #: crypto.pm:39 crypto.pm:73 lang.pm:382 network/adsl_consts.pm:882 #, c-format msgid "Sweden" msgstr "Швеция" #: crypto.pm:40 crypto.pm:70 lang.pm:387 #, c-format msgid "Slovakia" msgstr "Словакия" #: crypto.pm:41 crypto.pm:76 lang.pm:401 network/adsl_consts.pm:920 #, c-format msgid "Thailand" msgstr "Тайланд" #: crypto.pm:42 crypto.pm:75 lang.pm:411 #, c-format msgid "Taiwan" msgstr "Тайван" #: crypto.pm:43 crypto.pm:71 lang.pm:430 standalone/drakxtv:49 #, c-format msgid "South Africa" msgstr "Южна Африка" #: crypto.pm:77 crypto.pm:112 lang.pm:416 network/netconnect.pm:45 #, c-format msgid "United States" msgstr "САЩ" #: diskdrake/dav.pm:17 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" #: diskdrake/dav.pm:25 #, c-format msgid "New" msgstr "Нов" #: diskdrake/dav.pm:61 diskdrake/interactive.pm:454 diskdrake/smbnfs_gtk.pm:74 #, c-format msgid "Unmount" msgstr "Демонтирай" #: diskdrake/dav.pm:62 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75 #, c-format msgid "Mount" msgstr "Монтирай" #: diskdrake/dav.pm:64 diskdrake/interactive.pm:446 #: diskdrake/interactive.pm:670 diskdrake/interactive.pm:689 #: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78 #, c-format msgid "Mount point" msgstr "Място на монтиране" #: diskdrake/dav.pm:83 #, c-format msgid "Please enter the WebDAV server URL" msgstr "Моля въведете WebDAV сървър URL" #: diskdrake/dav.pm:87 #, c-format msgid "The URL must begin with http:// or https://" msgstr "URL трябва да започва с http:// или https://" #: diskdrake/dav.pm:109 #, c-format msgid "Server: " msgstr "Сървър: " #: diskdrake/dav.pm:110 diskdrake/interactive.pm:521 #: diskdrake/interactive.pm:1208 diskdrake/interactive.pm:1286 #, c-format msgid "Mount point: " msgstr "Място на монтиране: " #: diskdrake/dav.pm:111 diskdrake/interactive.pm:1293 #, c-format msgid "Options: %s" msgstr "Опции: %s" #: diskdrake/hd_gtk.pm:92 #, c-format msgid "Please make a backup of your data first" msgstr "Първо създайте backup на своите данни" #: diskdrake/hd_gtk.pm:95 #, c-format msgid "" "If you plan to use aboot, be careful to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Ако смятате да използвате aboot, оставете свободно пространство (2048 " "сектора\n" "са достатъчни) в началото на диска" #: diskdrake/hd_gtk.pm:152 help.pm:530 #, c-format msgid "Wizard" msgstr "Магьосник" #: diskdrake/hd_gtk.pm:185 #, c-format msgid "Choose action" msgstr "Изберете действие" #: diskdrake/hd_gtk.pm:189 #, c-format msgid "" "You have one big Microsoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Имате един голям FAT дял\n" "(по принцип се ползват от Microsoft Dos/Windows).\n" "Предлагам първо да промените големината на този дял\n" "(щракнете върху него, а след това щракнете върху \"Промени големината\")" #: diskdrake/hd_gtk.pm:191 #, c-format msgid "Please click on a partition" msgstr "Моля, цъкнете на дяла" #: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:457 #: standalone/drakbackup:2950 standalone/drakbackup:3010 #, c-format msgid "Details" msgstr "Подробности" #: diskdrake/hd_gtk.pm:251 #, c-format msgid "No hard drives found" msgstr "Не е намерен твърд диск" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Ext2" msgstr "Ext2" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Journalised FS" msgstr "Журнална FS" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Swap" msgstr "Swap" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "SunOS" msgstr "SunOS" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "HFS" msgstr "HFS" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Windows" msgstr "Windows" #: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1223 #, c-format msgid "Empty" msgstr "Празен" #: diskdrake/hd_gtk.pm:340 #, c-format msgid "Filesystem types:" msgstr "Видове файлова система:" #: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:359 diskdrake/hd_gtk.pm:365 #, c-format msgid "Use ``%s'' instead" msgstr "Вместо това използвайте ``%s''" #: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:470 #, c-format msgid "Create" msgstr "Създай" #: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365 #: diskdrake/interactive.pm:447 diskdrake/interactive.pm:623 #: diskdrake/removable.pm:25 diskdrake/removable.pm:48 #: standalone/harddrake2:108 standalone/harddrake2:117 #, c-format msgid "Type" msgstr "Вид" #. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE #: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:455 #: standalone/drakperm:123 standalone/printerdrake:248 #, c-format msgid "Delete" msgstr "Изтрий" #: diskdrake/hd_gtk.pm:365 #, c-format msgid "Use ``Unmount'' first" msgstr "Първо използвайте 'Демонтиране'" #: diskdrake/interactive.pm:194 #, c-format msgid "Choose another partition" msgstr "Изберете друг дял" #: diskdrake/interactive.pm:194 #, c-format msgid "Choose a partition" msgstr "Изберете дял" #: diskdrake/interactive.pm:223 #, c-format msgid "Exit" msgstr "Излез" #: diskdrake/interactive.pm:256 help.pm:530 #, c-format msgid "Undo" msgstr "Върни" #: diskdrake/interactive.pm:256 #, c-format msgid "Toggle to normal mode" msgstr "Премини в Нормален режим" #: diskdrake/interactive.pm:256 #, c-format msgid "Toggle to expert mode" msgstr "Премини в Експертен режим" #: diskdrake/interactive.pm:275 #, c-format msgid "Continue anyway?" msgstr "Продължение въпреки всичко ?" #: diskdrake/interactive.pm:280 #, c-format msgid "Quit without saving" msgstr "Изход без запис" #: diskdrake/interactive.pm:280 #, c-format msgid "Quit without writing the partition table?" msgstr "Изход, без да запис на таблицата на дяловете ?" #: diskdrake/interactive.pm:285 #, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "Искате ли да запазите промените в /etc/fstab" #: diskdrake/interactive.pm:292 install_steps_interactive.pm:340 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "Налага се ра рестартирате, преди модификациите да предизвикат ефект" #: diskdrake/interactive.pm:297 #, c-format msgid "" "You should format partition %s.\n" "Otherwise no entry for mount point %s will be written in fstab.\n" "Quit anyway?" msgstr "" #: diskdrake/interactive.pm:310 help.pm:530 #, c-format msgid "Clear all" msgstr "Изчисти всичко" #: diskdrake/interactive.pm:311 help.pm:530 #, c-format msgid "Auto allocate" msgstr "Автоматично създаване" #: diskdrake/interactive.pm:312 help.pm:530 help.pm:566 help.pm:606 #: help.pm:855 install_steps_interactive.pm:123 #, c-format msgid "More" msgstr "Още" #: diskdrake/interactive.pm:317 #, c-format msgid "Hard drive information" msgstr "Информацията за твърдия диск" #: diskdrake/interactive.pm:349 #, c-format msgid "All primary partitions are used" msgstr "Всички първични дялове се използват" #: diskdrake/interactive.pm:350 #, c-format msgid "I can not add any more partitions" msgstr "Не мога да добавя повече дялове" #: diskdrake/interactive.pm:351 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "Ако искате още дялове, моля изтрийте един, за да можете да създадете един " "разширен дял" #: diskdrake/interactive.pm:360 #, c-format msgid "No supermount" msgstr "" #: diskdrake/interactive.pm:361 #, c-format msgid "Supermount" msgstr "" #: diskdrake/interactive.pm:362 #, c-format msgid "Supermount except for CDROM drives" msgstr "" #: diskdrake/interactive.pm:368 help.pm:530 #, c-format msgid "Save partition table" msgstr "Запази таблицата с дяловете" #: diskdrake/interactive.pm:369 help.pm:530 #, c-format msgid "Restore partition table" msgstr "Възстанови таблицата с дяловете" #: diskdrake/interactive.pm:370 help.pm:530 #, c-format msgid "Rescue partition table" msgstr "Спасяване таблицата с дяловете" #: diskdrake/interactive.pm:372 help.pm:530 #, c-format msgid "Reload partition table" msgstr "Презареди таблицата с дяловете" #: diskdrake/interactive.pm:374 #, c-format msgid "Removable media automounting" msgstr "Автоматично монтиране на сменяем носител" #: diskdrake/interactive.pm:387 diskdrake/interactive.pm:413 #, c-format msgid "Select file" msgstr "Изберете файл" #: diskdrake/interactive.pm:399 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "Резервната таблица на дяловете не е със същата големина\n" "Да продължа ли все пак ?" #: diskdrake/interactive.pm:428 #, c-format msgid "Trying to rescue partition table" msgstr "Опитвам се да спася таблицата на дяловете" #: diskdrake/interactive.pm:434 #, c-format msgid "Detailed information" msgstr "Подробна информация" #: diskdrake/interactive.pm:449 diskdrake/interactive.pm:760 #, c-format msgid "Resize" msgstr "Промени големината" #: diskdrake/interactive.pm:450 #, c-format msgid "Format" msgstr "Форматирай" #: diskdrake/interactive.pm:452 #, c-format msgid "Add to RAID" msgstr "Прибави към RAID" #: diskdrake/interactive.pm:453 #, c-format msgid "Add to LVM" msgstr "Прибави към LVM" #: diskdrake/interactive.pm:456 #, c-format msgid "Remove from RAID" msgstr "Премахни от RAID" #: diskdrake/interactive.pm:457 #, c-format msgid "Remove from LVM" msgstr "Премахни от LVM" #: diskdrake/interactive.pm:458 #, c-format msgid "Modify RAID" msgstr "Модифицирай RAID" #: diskdrake/interactive.pm:459 #, c-format msgid "Use for loopback" msgstr "Използвай за loopback" #: diskdrake/interactive.pm:514 #, c-format msgid "Create a new partition" msgstr "Създай нов дял" #: diskdrake/interactive.pm:517 #, c-format msgid "Start sector: " msgstr "Начален сектор: " #: diskdrake/interactive.pm:519 diskdrake/interactive.pm:929 #, c-format msgid "Size in MB: " msgstr "Големина в MB: " #: diskdrake/interactive.pm:520 diskdrake/interactive.pm:930 #, c-format msgid "Filesystem type: " msgstr "Вид файлова система: " #: diskdrake/interactive.pm:525 #, c-format msgid "Preference: " msgstr "Предпочитание: " #: diskdrake/interactive.pm:528 #, c-format msgid "Logical volume name " msgstr "Име на logical volume" #: diskdrake/interactive.pm:558 #, c-format msgid "" "You can not create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" #: diskdrake/interactive.pm:588 #, c-format msgid "Remove the loopback file?" msgstr "Да премахна ли loopback файла ?" #: diskdrake/interactive.pm:607 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" "След промяна на типа на дяла %s, всички данни върху него ще бъдат загубени" #: diskdrake/interactive.pm:619 #, c-format msgid "Change partition type" msgstr "Промяна типа на дяла" #: diskdrake/interactive.pm:620 diskdrake/removable.pm:47 #, c-format msgid "Which filesystem do you want?" msgstr "Коя файлова система искате ?" #: diskdrake/interactive.pm:628 #, c-format msgid "Switching from ext2 to ext3" msgstr "Преход от ext2 към ext3" #: diskdrake/interactive.pm:657 #, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "Къде искате да монтирате loopback-файла %s ?" #: diskdrake/interactive.pm:658 #, c-format msgid "Where do you want to mount device %s?" msgstr "Къде искате да монтирате устройство %s ?" #: diskdrake/interactive.pm:663 #, c-format msgid "" "Can not unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "Не мога да махна точката на монтиране, тъй като дялът се използва за " "loopback.\n" "Първо махнете loopback" #: diskdrake/interactive.pm:688 #, c-format msgid "Where do you want to mount %s?" msgstr "Къде искате да монтирате устройство %s ?" #: diskdrake/interactive.pm:712 diskdrake/interactive.pm:791 #: install_interactive.pm:156 install_interactive.pm:188 #, c-format msgid "Resizing" msgstr "Промяна на големината" #: diskdrake/interactive.pm:712 #, c-format msgid "Computing FAT filesystem bounds" msgstr "Изчислявам границите на fat файловата система" #: diskdrake/interactive.pm:748 #, c-format msgid "This partition is not resizeable" msgstr "Големината на дяла не може да бъде променена" #: diskdrake/interactive.pm:753 #, c-format msgid "All data on this partition should be backed-up" msgstr "Всички данни на този дял трябва да бъдат архивирани" #: diskdrake/interactive.pm:755 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" "След промяна големината на дяла %s, данните върху него ще бъдат загубени" #: diskdrake/interactive.pm:760 #, c-format msgid "Choose the new size" msgstr "Изберете нова големина" #: diskdrake/interactive.pm:761 #, c-format msgid "New size in MB: " msgstr "Нова големина в MB: " #: diskdrake/interactive.pm:802 install_interactive.pm:196 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" #: diskdrake/interactive.pm:843 #, c-format msgid "Choose an existing RAID to add to" msgstr "Изберете съществуващ RAID за прибавяне" #: diskdrake/interactive.pm:845 diskdrake/interactive.pm:862 #, c-format msgid "new" msgstr "нов" #: diskdrake/interactive.pm:860 #, c-format msgid "Choose an existing LVM to add to" msgstr "Изберете съществуващ LVM за прибавяне" #: diskdrake/interactive.pm:866 #, c-format msgid "LVM name?" msgstr "LVM име ?" #: diskdrake/interactive.pm:894 #, c-format msgid "" "Physical volume %s is still in use.\n" "Do you want to move used physical extents on this volume to other volumes?" msgstr "" #: diskdrake/interactive.pm:896 #, c-format msgid "Moving physical extents" msgstr "" #: diskdrake/interactive.pm:914 #, c-format msgid "This partition can not be used for loopback" msgstr "Този дял не може да бъде използван за loopback" #: diskdrake/interactive.pm:927 #, c-format msgid "Loopback" msgstr "Loopback" #: diskdrake/interactive.pm:928 #, c-format msgid "Loopback file name: " msgstr "Име на loopback файла: " #: diskdrake/interactive.pm:933 #, c-format msgid "Give a file name" msgstr "Дайте име на файл" #: diskdrake/interactive.pm:936 #, c-format msgid "File is already used by another loopback, choose another one" msgstr "Файлът вече се използва то друг loopback, изберете друг файл." #: diskdrake/interactive.pm:937 #, c-format msgid "File already exists. Use it?" msgstr "Файлът вече съшествува. Да го използвам ли ?" #: diskdrake/interactive.pm:960 #, c-format msgid "Mount options" msgstr "Опции за mount:" #: diskdrake/interactive.pm:967 #, c-format msgid "Various" msgstr "Различни" #: diskdrake/interactive.pm:1034 #, c-format msgid "device" msgstr "устройство" #: diskdrake/interactive.pm:1035 #, c-format msgid "level" msgstr "ниво" #: diskdrake/interactive.pm:1036 #, fuzzy, c-format msgid "chunk size in KiB" msgstr "големина на парчето" #: diskdrake/interactive.pm:1053 #, c-format msgid "Be careful: this operation is dangerous." msgstr "Внимание: тази операция е опасна" #: diskdrake/interactive.pm:1068 #, c-format msgid "What type of partitioning?" msgstr "Какъв тип разделяне на дялове ?" #: diskdrake/interactive.pm:1106 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "Трябва да рестартирате, преди промените да влязат в сила" #: diskdrake/interactive.pm:1115 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "Таблицата на дяловете на устройство %s ще бъде записана върху диска !" #: diskdrake/interactive.pm:1138 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "След форматиране на дяла %s, всички данни върху него ще бъдат загубени" #: diskdrake/interactive.pm:1154 #, c-format msgid "Move files to the new partition" msgstr "Премести файловете на нов дял" #: diskdrake/interactive.pm:1154 standalone/draksambashare:75 #: standalone/draksambashare:138 #, c-format msgid "Hide files" msgstr "Скрий файловете" #: diskdrake/interactive.pm:1155 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "Директорията %s вече съдържа някакви данни\n" "(%s)" #: diskdrake/interactive.pm:1166 #, c-format msgid "Moving files to the new partition" msgstr "Премести файловете на нов дял" #: diskdrake/interactive.pm:1170 #, c-format msgid "Copying %s" msgstr "Копиране на %s" #: diskdrake/interactive.pm:1174 #, c-format msgid "Removing %s" msgstr "Изтриване на %s" #: diskdrake/interactive.pm:1188 #, c-format msgid "partition %s is now known as %s" msgstr "дял %s сега е известен като %s" #: diskdrake/interactive.pm:1189 #, c-format msgid "Partitions have been renumbered: " msgstr "" #: diskdrake/interactive.pm:1209 diskdrake/interactive.pm:1271 #, c-format msgid "Device: " msgstr "Устройство: " #: diskdrake/interactive.pm:1210 #, fuzzy, c-format msgid "Devfs name: " msgstr "Име на хост:" #: diskdrake/interactive.pm:1211 #, c-format msgid "Volume label: " msgstr "" #: diskdrake/interactive.pm:1212 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "Буква на устройството под DOS: %s (просто предположение)\n" #: diskdrake/interactive.pm:1216 diskdrake/interactive.pm:1225 #: diskdrake/interactive.pm:1289 #, c-format msgid "Type: " msgstr "Вид: " #: diskdrake/interactive.pm:1220 install_steps_gtk.pm:300 #, c-format msgid "Name: " msgstr "Име: " #: diskdrake/interactive.pm:1227 #, c-format msgid "Start: sector %s\n" msgstr "Начало: сектор %s\n" #: diskdrake/interactive.pm:1228 #, c-format msgid "Size: %s" msgstr "Размер: %s" #: diskdrake/interactive.pm:1230 #, c-format msgid ", %s sectors" msgstr ", %s сектора" #: diskdrake/interactive.pm:1232 #, c-format msgid "Cylinder %d to %d\n" msgstr "От цилиндър %d до цилиндър %d\n" #: diskdrake/interactive.pm:1233 #, c-format msgid "Number of logical extents: %d\n" msgstr "" #: diskdrake/interactive.pm:1234 #, c-format msgid "Formatted\n" msgstr "Форматиран\n" #: diskdrake/interactive.pm:1235 #, c-format msgid "Not formatted\n" msgstr "Неформатиран\n" #: diskdrake/interactive.pm:1236 #, c-format msgid "Mounted\n" msgstr "Монтиран\n" #: diskdrake/interactive.pm:1237 #, c-format msgid "RAID %s\n" msgstr "RAID %s\n" #: diskdrake/interactive.pm:1242 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "Loopback файл(ове):\n" " %s\n" #: diskdrake/interactive.pm:1243 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Дял, който се стартира по подразбиране\n" " (за MS-DOS boot, не за lilo)\n" #: diskdrake/interactive.pm:1245 #, c-format msgid "Level %s\n" msgstr "Ниво %s\n" #: diskdrake/interactive.pm:1246 #, fuzzy, c-format msgid "Chunk size %d KiB\n" msgstr "Размер на парчето %s\n" #: diskdrake/interactive.pm:1247 #, c-format msgid "RAID-disks %s\n" msgstr "RAID-дискове %s\n" #: diskdrake/interactive.pm:1249 #, c-format msgid "Loopback file name: %s" msgstr "Име на loopback файла: %s" #: diskdrake/interactive.pm:1252 #, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" "\n" "Вероятно е този дял да е\n" "Драйвер-дял, може би трябва\n" "трябва да го оставите.\n" #: diskdrake/interactive.pm:1255 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "Тази специална стартираща\n" "ивица на дяла е за двойно\n" "стартиране на системата ви.\n" #: diskdrake/interactive.pm:1272 #, c-format msgid "Read-only" msgstr "Само за четене" #: diskdrake/interactive.pm:1273 #, c-format msgid "Size: %s\n" msgstr "Размер: %s\n" #: diskdrake/interactive.pm:1274 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Геометрия: %s цилиндри, %s глави, %s сектори\n" #: diskdrake/interactive.pm:1275 network/thirdparty.pm:329 #, c-format msgid "Info: " msgstr "Информация: " #: diskdrake/interactive.pm:1276 #, c-format msgid "LVM-disks %s\n" msgstr "LVM-дискове %s\n" #: diskdrake/interactive.pm:1277 #, c-format msgid "Partition table type: %s\n" msgstr "Тип на таблицата с дялове: %s\n" #: diskdrake/interactive.pm:1278 #, c-format msgid "on channel %d id %d\n" msgstr "на канал %d id %d\n" #: diskdrake/interactive.pm:1321 #, c-format msgid "Filesystem encryption key" msgstr "Криптиращ ключ за файлова система" #: diskdrake/interactive.pm:1322 #, c-format msgid "Choose your filesystem encryption key" msgstr "Избор на криптиращ ключ за еашата файлова система" #: diskdrake/interactive.pm:1325 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "" "Криптиращ ключ е прекалено прост (трябва да бъде дълга поне %d символа)" #: diskdrake/interactive.pm:1326 #, c-format msgid "The encryption keys do not match" msgstr "Ключовете за криптиране не съвпадат" #: diskdrake/interactive.pm:1329 network/netconnect.pm:1052 #: standalone/drakconnect:419 standalone/drakroam:120 #, c-format msgid "Encryption key" msgstr "Ключ за криптиране" #: diskdrake/interactive.pm:1330 #, c-format msgid "Encryption key (again)" msgstr "Ключ за криптиране (отново)" #: diskdrake/interactive.pm:1332 standalone/drakvpn:1017 #: standalone/drakvpn:1102 #, fuzzy, c-format msgid "Encryption algorithm" msgstr "идентификация" #: diskdrake/removable.pm:46 #, c-format msgid "Change type" msgstr "Промяни типа" #: diskdrake/smbnfs_gtk.pm:163 #, c-format msgid "Can not login using username %s (bad password?)" msgstr "Не мога да вляза като използвам име %s (грешна парола?)" #: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176 #, c-format msgid "Domain Authentication Required" msgstr "Изисква Идентификация за Домейн" #: diskdrake/smbnfs_gtk.pm:168 #, c-format msgid "Which username" msgstr "Кое потребителско име" #: diskdrake/smbnfs_gtk.pm:168 #, c-format msgid "Another one" msgstr "Друго" #: diskdrake/smbnfs_gtk.pm:177 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "" "Моля, въведете вашето име, парола и име на домейн за достъп до този хост." #: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3501 #, c-format msgid "Username" msgstr "Потребителско име" #: diskdrake/smbnfs_gtk.pm:205 #, c-format msgid "Search servers" msgstr "Търси сървъри" #: diskdrake/smbnfs_gtk.pm:210 #, c-format msgid "Search new servers" msgstr "Търси нови сървъри" #: do_pkgs.pm:16 do_pkgs.pm:49 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "" "Пакет %s трябва да бъде инсталиран\n" "Искате да го инсталирате?" #: do_pkgs.pm:19 do_pkgs.pm:39 do_pkgs.pm:52 printer/printerdrake.pm:4037 #, fuzzy, c-format msgid "Could not install the %s package!" msgstr "Инсталиране на пакета %s" #: do_pkgs.pm:24 do_pkgs.pm:57 #, c-format msgid "Mandatory package %s is missing" msgstr "Задължителният пакет %s липсва" #: do_pkgs.pm:35 harddrake/sound.pm:271 install_steps_interactive.pm:1317 #: keyboard.pm:391 network/ndiswrapper.pm:95 network/netconnect.pm:460 #: printer/printerdrake.pm:1429 printer/printerdrake.pm:2461 #: printer/printerdrake.pm:2561 printer/printerdrake.pm:2607 #: printer/printerdrake.pm:2674 printer/printerdrake.pm:2709 #: printer/printerdrake.pm:3043 printer/printerdrake.pm:3050 #: printer/printerdrake.pm:4036 printer/printerdrake.pm:4365 #: printer/printerdrake.pm:4485 printer/printerdrake.pm:5644 #: standalone/drakTermServ:326 standalone/drakTermServ:1205 #: standalone/drakTermServ:1266 standalone/drakTermServ:1931 #: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:133 #: standalone/drakclock:224 standalone/drakconnect:973 standalone/drakperm:380 #: standalone/drakperm:390 standalone/drakups:27 standalone/harddrake2:490 #: standalone/localedrake:43 standalone/scannerdrake:51 #: standalone/scannerdrake:940 #, c-format msgid "Warning" msgstr "Предупреждение" #: do_pkgs.pm:35 standalone/drakbackup:4107 standalone/harddrake2:490 #, c-format msgid "The following packages need to be installed:\n" msgstr "Следните пакети ще трябва да се инсталират:\n" #: do_pkgs.pm:202 #, c-format msgid "Installing packages..." msgstr "Инсталиране на пакети ..." #: do_pkgs.pm:247 #, fuzzy, c-format msgid "Removing packages..." msgstr "Изтриване на %s ..." #: fs/format.pm:58 fs/format.pm:65 #, c-format msgid "Formatting partition %s" msgstr "Форматиране на дял %s" #: fs/format.pm:62 #, c-format msgid "Creating and formatting file %s" msgstr "Създаване и форматиране на файл %s" #: fs/format.pm:115 #, c-format msgid "I do not know how to format %s in type %s" msgstr "не знам как да форматирам %s в тип %s" #: fs/format.pm:120 fs/format.pm:122 #, c-format msgid "%s formatting of %s failed" msgstr "%s форматиране от %s провалено" #: fs/loopback.pm:24 #, c-format msgid "Circular mounts %s\n" msgstr "\"Омагьосан кръг\" от монтирания: %s\n" #: fs/mount.pm:74 #, c-format msgid "Mounting partition %s" msgstr "Форматира дял %s" #: fs/mount.pm:75 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "монтирането на дял %s в директория %s пропадна" #: fs/mount.pm:80 fs/mount.pm:97 #, c-format msgid "Checking %s" msgstr "Проверка на %s" #: fs/mount.pm:113 partition_table.pm:385 #, c-format msgid "error unmounting %s: %s" msgstr "грешка при демонтиране на %s: %s" #: fs/mount.pm:142 #, c-format msgid "Enabling swap partition %s" msgstr "Разрешава swap дял %s" #: fs/mount_options.pm:111 #, fuzzy, c-format msgid "Use an encrypted file system" msgstr "" "Вие не може да използвате криптирана файлова система за точка на монтиране %s" #: fs/mount_options.pm:113 #, c-format msgid "Enable group disk quota accounting and optionally enforce limits" msgstr "" #: fs/mount_options.pm:115 #, c-format msgid "" "Do not update inode access times on this file system\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" #: fs/mount_options.pm:118 #, c-format msgid "" "Can only be mounted explicitly (i.e.,\n" "the -a option will not cause the file system to be mounted)." msgstr "" #: fs/mount_options.pm:121 #, c-format msgid "Do not interpret character or block special devices on the file system." msgstr "" #: fs/mount_options.pm:123 #, c-format msgid "" "Do not allow execution of any binaries on the mounted\n" "file system. This option might be useful for a server that has file systems\n" "containing binaries for architectures other than its own." msgstr "" #: fs/mount_options.pm:127 #, c-format msgid "" "Do not allow set-user-identifier or set-group-identifier\n" "bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" "have suidperl(1) installed.)" msgstr "" #: fs/mount_options.pm:131 #, c-format msgid "Mount the file system read-only." msgstr "" #: fs/mount_options.pm:133 #, c-format msgid "All I/O to the file system should be done synchronously." msgstr "" #: fs/mount_options.pm:137 #, c-format msgid "" "Allow an ordinary user to mount the file system. The\n" "name of the mounting user is written to mtab so that he can unmount the " "file\n" "system again. This option implies the options noexec, nosuid, and nodev\n" "(unless overridden by subsequent options, as in the option line\n" "user,exec,dev,suid )." msgstr "" #: fs/mount_options.pm:143 #, c-format msgid "Enable user disk quota accounting, and optionally enforce limits" msgstr "" #: fs/mount_options.pm:145 #, c-format msgid "Give write access to ordinary users" msgstr "" #: fs/mount_options.pm:147 #, c-format msgid "Give read-only access to ordinary users" msgstr "" #: fs/type.pm:376 #, c-format msgid "You can not use JFS for partitions smaller than 16MB" msgstr "Не можете да използвате JFS за дял по-малък от 16 МБ" #: fs/type.pm:377 #, c-format msgid "You can not use ReiserFS for partitions smaller than 32MB" msgstr "Не можете да инсталиране ReiserFS на дял по-малък от 32 МБ" #: fsedit.pm:27 #, c-format msgid "with /usr" msgstr "с /usr" #: fsedit.pm:32 #, c-format msgid "server" msgstr "сървър" #: fsedit.pm:217 #, c-format msgid "" "I can not read the partition table of device %s, it's too corrupted for me :" "(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to lose all the partitions?\n" msgstr "" "Не мога да разчета таблицата на дяловете на устройство %s, прекалено е " "повредена за мен :(\n" "Мога да се опитам да изчистя лошите дялове (ВСИЧКИ ДАННИ ще бъдат " "загубени!).\n" "Друго решение е да забраните на DrakX поправя таблицата с дялове.\n" "(грешката е %s)\n" "\n" "Съгласни ли сте да загубите всички дялове?\n" #: fsedit.pm:385 #, c-format msgid "Mount points must begin with a leading /" msgstr "Точките на монтиране трябва да започват с /" #: fsedit.pm:386 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "Точките за монтиране трябва да съдържат само букви и цифри" #: fsedit.pm:387 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "Вече има дял монтиран на това място %s\n" #: fsedit.pm:389 #, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "Маркирали сте софтуерен RAID дял като root (/).\n" "Няма зареждаща програма, която да може да се справи с него без /boot дял.\n" "Така че добавете /boot дял" #: fsedit.pm:394 #, c-format msgid "" "You can not use a LVM Logical Volume for mount point %s since it spans " "physical volumes" msgstr "" #: fsedit.pm:396 #, c-format msgid "" "You've selected a LVM Logical Volume as root (/).\n" "The bootloader is not able to handle this when the volume spans physical " "volumes.\n" "You should create a /boot partition first" msgstr "" #: fsedit.pm:400 fsedit.pm:402 #, c-format msgid "This directory should remain within the root filesystem" msgstr "Тази директория трябва да остане в рамките на root файловата система." #: fsedit.pm:404 fsedit.pm:406 #, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "Нуждаете се от истинска файлова система (ext2, reiserfs,xfs, или jfs) за " "тази точка на монтиране\n" #: fsedit.pm:408 #, c-format msgid "You can not use an encrypted file system for mount point %s" msgstr "" "Вие не може да използвате криптирана файлова система за точка на монтиране %s" #: fsedit.pm:469 #, c-format msgid "Not enough free space for auto-allocating" msgstr "Няма достатъчно място за автоматично разпределяне" #: fsedit.pm:471 #, c-format msgid "Nothing to do" msgstr "Няма нищо за правене" #: harddrake/data.pm:62 install_any.pm:1711 #, c-format msgid "Floppy" msgstr "Флопи" #: harddrake/data.pm:72 #, c-format msgid "Zip" msgstr "Zip устройство" #: harddrake/data.pm:88 install_any.pm:1712 #, c-format msgid "Hard Disk" msgstr "Диск" #: harddrake/data.pm:97 install_any.pm:1713 #, c-format msgid "CDROM" msgstr "CDROM" #: harddrake/data.pm:107 #, c-format msgid "CD/DVD burners" msgstr "CD/DVD записващо" #: harddrake/data.pm:117 #, c-format msgid "DVD-ROM" msgstr "DVD-ROM" #: harddrake/data.pm:127 standalone/drakbackup:2048 #, c-format msgid "Tape" msgstr "Лента" #: harddrake/data.pm:136 #, c-format msgid "Videocard" msgstr "Видео карта" #: harddrake/data.pm:146 #, c-format msgid "DVB card" msgstr "" #: harddrake/data.pm:154 #, c-format msgid "Tvcard" msgstr "TV карта" #: harddrake/data.pm:163 #, c-format msgid "Other MultiMedia devices" msgstr "Друга мултимедийни устройства" #: harddrake/data.pm:172 #, c-format msgid "Soundcard" msgstr "Звукова карта" #: harddrake/data.pm:185 #, c-format msgid "Webcam" msgstr "" #: harddrake/data.pm:199 #, c-format msgid "Processors" msgstr "Процесори" #: harddrake/data.pm:209 #, fuzzy, c-format msgid "ISDN adapters" msgstr "ISDN карта" #: harddrake/data.pm:220 #, c-format msgid "USB sound devices" msgstr "" #: harddrake/data.pm:229 #, c-format msgid "Radio cards" msgstr "" #: harddrake/data.pm:238 #, c-format msgid "ATM network cards" msgstr "" #: harddrake/data.pm:247 #, c-format msgid "WAN network cards" msgstr "" #: harddrake/data.pm:256 #, c-format msgid "Bluetooth devices" msgstr "" #: harddrake/data.pm:265 #, c-format msgid "Ethernetcard" msgstr "Ethernet карта" #: harddrake/data.pm:282 network/netconnect.pm:481 #, c-format msgid "Modem" msgstr "Модем" #: harddrake/data.pm:292 #, c-format msgid "ADSL adapters" msgstr "" #: harddrake/data.pm:306 #, c-format msgid "Memory" msgstr "Памет" #: harddrake/data.pm:315 #, c-format msgid "AGP controllers" msgstr "AGP контролери" #: harddrake/data.pm:324 help.pm:186 help.pm:855 #: install_steps_interactive.pm:993 #, c-format msgid "Printer" msgstr "Принтер" #. -PO: these are joysticks controllers: #: harddrake/data.pm:338 #, c-format msgid "Game port controllers" msgstr "" #: harddrake/data.pm:347 #, c-format msgid "Joystick" msgstr "Джойстик" #: harddrake/data.pm:357 #, c-format msgid "SATA controllers" msgstr "SATA контролери" #: harddrake/data.pm:366 #, c-format msgid "RAID controllers" msgstr "RAID контролери" #: harddrake/data.pm:375 #, c-format msgid "(E)IDE/ATA controllers" msgstr "(E)IDE/ATA контролери" #: harddrake/data.pm:384 #, c-format msgid "Firewire controllers" msgstr "Firewire контролери" #: harddrake/data.pm:393 #, c-format msgid "PCMCIA controllers" msgstr "PCMCIA контролери" #: harddrake/data.pm:402 #, c-format msgid "SCSI controllers" msgstr "SCSI контролери" #: harddrake/data.pm:411 #, c-format msgid "USB controllers" msgstr "USB контролери" #: harddrake/data.pm:420 #, fuzzy, c-format msgid "USB ports" msgstr ", USB принтер" #: harddrake/data.pm:429 #, c-format msgid "SMBus controllers" msgstr "SMBus контролери" #: harddrake/data.pm:438 #, c-format msgid "Bridges and system controllers" msgstr "Бриджове и системни контролери" #: harddrake/data.pm:449 help.pm:855 install_steps_interactive.pm:119 #: install_steps_interactive.pm:953 standalone/keyboarddrake:29 #, c-format msgid "Keyboard" msgstr "Клавиатура" #: harddrake/data.pm:462 #, c-format msgid "Tablet and touchscreen" msgstr "" #: harddrake/data.pm:471 help.pm:855 install_steps_interactive.pm:986 #, c-format msgid "Mouse" msgstr "Мишка" #: harddrake/data.pm:485 #, c-format msgid "UPS" msgstr "UPS" #: harddrake/data.pm:494 #, c-format msgid "Scanner" msgstr "Скенер" #: harddrake/data.pm:504 standalone/harddrake2:454 #, c-format msgid "Unknown/Others" msgstr "Неизвестни/Други" #: harddrake/data.pm:532 #, c-format msgid "cpu # " msgstr "cpu # " #: harddrake/sound.pm:192 standalone/drakconnect:162 #: standalone/drakconnect:637 #, c-format msgid "Please Wait... Applying the configuration" msgstr "Моля, почакайте ... Прилагане на настройките" #: harddrake/sound.pm:228 #, c-format msgid "No alternative driver" msgstr "Няма алтернативен драйвер" #: harddrake/sound.pm:229 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" "Няма известнен OSS/ALSA алтернативен драйвер за вашата звукова карта (%s) " "която в момента използва \"%s\"" #: harddrake/sound.pm:235 #, c-format msgid "Sound configuration" msgstr "Настройка за звук" #: harddrake/sound.pm:237 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" "Тук може да изберете алтернативен драйвер (OSS или ALSA) за вашата звукова " "карта (%s)." #. -PO: here the first %s is either "OSS" or "ALSA", #. -PO: the second %s is the name of the current driver #. -PO: and the third %s is the name of the default driver #: harddrake/sound.pm:242 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" "\n" "\n" "Вашата карта в момента използва %s\"%s\" драйвер (подразбиращ драйвер за " "картата ви е \"%s\")" #: harddrake/sound.pm:244 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent " "sound API (it's available on most UNIX(tm) systems) but it's a very basic " "and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" #: harddrake/sound.pm:258 harddrake/sound.pm:343 standalone/drakups:146 #, c-format msgid "Driver:" msgstr "Драйвер: " #: harddrake/sound.pm:263 #, c-format msgid "Trouble shooting" msgstr "" #: harddrake/sound.pm:271 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver will only be used on next bootstrap." msgstr "" #: harddrake/sound.pm:279 #, c-format msgid "No open source driver" msgstr "" #: harddrake/sound.pm:280 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "" "Няма свободен драйвер за вашата звукова карта (%s), но има собствени драйвер " "на \"%s\"." #: harddrake/sound.pm:283 #, c-format msgid "No known driver" msgstr "Няма известен драйвер" #: harddrake/sound.pm:284 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "Няма драйвер за вашата звукова карта (%s)" #: harddrake/sound.pm:288 #, fuzzy, c-format msgid "Unknown driver" msgstr "Неизвестен драйвер" #: harddrake/sound.pm:289 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "Грешка: \"%s\" драйвер за вашата карта е инсталиран" #: harddrake/sound.pm:303 #, c-format msgid "Sound trouble shooting" msgstr "Затруднения при звук" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:306 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" #: harddrake/sound.pm:332 #, c-format msgid "Let me pick any driver" msgstr "Нека избера драйвер" #: harddrake/sound.pm:335 #, c-format msgid "Choosing an arbitrary driver" msgstr "Избор на случаен драйвер" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:338 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" "Ако мислите , че знаете кой точно драйвер е за вашата карта\n" "вие може да го изберете от горният списък.\n" "\n" "Текущо използваният драйвер за вашата \"%s\" звукова карта е \"%s\" " #: harddrake/v4l.pm:12 standalone/net_applet:64 standalone/net_applet:65 #: standalone/net_applet:67 #, c-format msgid "Auto-detect" msgstr "Автоматично засичане" #: harddrake/v4l.pm:85 harddrake/v4l.pm:263 harddrake/v4l.pm:296 #, c-format msgid "Unknown|Generic" msgstr "Неизвестен|Общ" #: harddrake/v4l.pm:118 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "Неизвестен|CPH05X (bt878) [много производители]" #: harddrake/v4l.pm:119 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "Неизвестен|CPH06X (bt878) [много производители]" #: harddrake/v4l.pm:404 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" #: harddrake/v4l.pm:407 #, c-format msgid "Card model:" msgstr "Модел на карта:" #: harddrake/v4l.pm:408 #, c-format msgid "Tuner type:" msgstr "Тип на тунер:" #: harddrake/v4l.pm:409 #, c-format msgid "Number of capture buffers:" msgstr "" #: harddrake/v4l.pm:409 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "" #: harddrake/v4l.pm:411 #, c-format msgid "PLL setting:" msgstr "PLL настройки:" #: harddrake/v4l.pm:412 #, c-format msgid "Radio support:" msgstr "Подръжка на радио:" #: harddrake/v4l.pm:412 #, c-format msgid "enable radio support" msgstr "разрешава подръжка на радио" #: help.pm:11 #, fuzzy, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandriva Linux distribution. If you agree with all the\n" "terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n" "button will reboot your computer." msgstr "" "Преди да продължите, трябва внимателно да прочетете условията на лиценза. " "Той\n" "покрива цялата Mandriva Linux дистрибуция, и, ако сте съгласни с всички " "условия\n" "в него, сложете отметка на \"%s\".Ако не сте съгласни,просто спрете " "компютъра си." #: help.pm:14 install_steps_gtk.pm:539 install_steps_interactive.pm:92 #: install_steps_interactive.pm:738 standalone/drakautoinst:214 #, c-format msgid "Accept" msgstr "Приеми" #: help.pm:17 #, fuzzy, c-format msgid "" "GNU/Linux is a multi-user system which means each user can have his or her\n" "own preferences, own files and so on. But unlike \"root\", who is the\n" "system administrator, the users you add at this point will not be " "authorized\n" "to change anything except their own files and their own configurations,\n" "protecting the system from unintentional or malicious changes which could\n" "impact on the system as a whole. You'll have to create at least one regular\n" "user for yourself -- this is the account which you should use for routine,\n" "day-to-day usage. Although it's very easy to log in as \"root\" to do\n" "anything and everything, it may also be very dangerous! A very simple\n" "mistake could mean that your system will not work any more. If you make a\n" "serious mistake as a regular user, the worst that can happen is that you'll\n" "lose some information, but you will not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you type in this field and copy it to the \"%s\" one, which is the name\n" "this user will enter to log onto the system. If you like, you may override\n" "the default and change the user name. The next step is to enter a password.\n" "From a security point of view, a non-privileged (regular) user password is\n" "not as crucial as the \"root\" password, but that's no reason to neglect it\n" "by making it blank or too simple: after all, your files could be the ones\n" "at risk.\n" "\n" "Once you click on \"%s\", you can add other users. Add a user for each one\n" "of your friends, your father, your sister, etc. Click \"%s\" when you're\n" "finished adding users.\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\" for\n" "that user (bash by default).\n" "\n" "When you're finished adding users, you'll be asked to choose a user who\n" "will be automatically logged into the system when the computer boots up. If\n" "you're interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click on\n" "\"%s\". If you're not interested in this feature, uncheck the \"%s\" box." msgstr "" "GNU/Linux е многопотребителска система, която означава, че всеки потребител " "може\n" "да има свои предпочитания, файлове и т.н.. можете да прочетете Ръководството " "на\n" "Потребителя, за да научите повече.\n" "За разлика от Root, който е администраторът, потребителите, които ще " "добавите тук\n" "няма да могат да променят нищо освен собствените си файлове и техните " "настройки.\n" "Ще трябва да създадете поне един обикновен потребител за себе си.\n" "С този акаунт ще трябва да влизате за рутинна дейност. Въпреки това " "практиката\n" "да влизате като root ежедневно, може да бъде много опасна ! И най-малката " "грешка\n" "може да означава, че системата ви няма да работи повече. Ако направите някоя " "сериозна\n" "грешка като потребител, това може са да доведе до загуба на част от " "информацията,\n" "но не и на цялата система.\n" "\n" "Първо, трябва да си въведете името. Това не е задължително, разбира се, " "всъщност\n" "можете да въведете каквото и да е. DrakX след това ще избере първата " "въведена\n" "в кутийката дума и ще го изкара като потребителско име. Това е името, с " "което\n" "всъщност определеният потребител ще влиза в системата. Можете да го " "промените.\n" "Трябва да въведете и парола тук. Паролата на непревилегирован (обикновен) " "потребител\n" "не е толкова фатална като тази на Root от гледна точка на сигурността, но " "все\n" "пак няма причина да я подценявате, тъй като рискувате файловете си.\n" "\n" "След като цъкнете на \"Приеми потребител\", можете да добавите колкото си " "искате.\n" "Добавете по един потребител за всеки от приятелите си: баща си, сестра си, " "например.\n" "Когато сте добавили всички потребители, които искате, цъкнете Готово.\n" "\n" "Цъкнете на бутона \"Напредничав\", за да промените обвивката по подразбиране " "на\n" "потребителя (bash по подразбиране)." #: help.pm:51 printer/printerdrake.pm:1887 printer/printerdrake.pm:2008 #: standalone/draksambashare:54 #, c-format msgid "User name" msgstr "Потребителско име" #: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:237 #: install_steps_gtk.pm:682 interactive.pm:436 interactive/newt.pm:321 #: network/thirdparty.pm:383 printer/printerdrake.pm:3973 #: standalone/drakTermServ:384 standalone/drakbackup:3952 #: standalone/drakbackup:4046 standalone/drakbackup:4063 #: standalone/drakbackup:4081 ugtk2.pm:490 #, c-format msgid "Next" msgstr "Следващ" #: help.pm:51 #, c-format msgid "Do you want to use this feature?" msgstr "Искате ли да използвате тази особеност?" #: help.pm:54 #, fuzzy, c-format msgid "" "Listed here are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "По-горе са изброени засечените Linux дялове съществуващи\n" "на твърдия ви диск. Можете да запазите избора направен от магьосника, те са\n" "добри за обща употреба. Ако ги промените, трябва да поне да определите\n" "root дял (\"/\"). Не избирайте прекалено малки дялове, защото няма да " "можете\n" "да инсталирате достатъчно софтуер. Ако искате да съхранявате данните си на\n" "отделен дял, трябва да изберете \"/home\" (възможно е само, ако имате " "повече\n" "от един Linux дял).\n" "\n" "\n" "За информация, всеки дял е показан, както следва: \"Име\", \"Капацитет\".\n" "\n" "\n" "\"Името\" се кодира както следва: \"тип на диска\", \"номер на диска\",\n" "\"номер на дял\" (например, \"hda1\").\n" "\n" "\n" "\"Типът на диска\" може да е \"hd\", ако е IDE твърд диск, или \"sd\", ако " "е\n" "SCSI твърд диск.\n" "\n" "\n" "\"Номерът на диска\" винаги е буквата след \"hd\" или \"sd\". При IDE " "дискове:\n" "\n" " * \"a\" означава \"master диск на първия IDE контролер\",\n" " * \"b\" означава \"slave диск на първия IDE контролер\",\n" " * \"c\" означава \"master диск на втория IDE контролер\",\n" " * \"d\" означава \"slave диск на втория IDE контролер\".\n" "\n" "\n" "При SCSI устройства, \"a\" означава \"първи твърд диск\", \"b\" означава " "\"втори твърд диск\" и т.н.." #: help.pm:85 #, fuzzy, c-format msgid "" "The Mandriva Linux installation is distributed on several CD-ROMs. If a\n" "selected package is located on another CD-ROM, DrakX will eject the current\n" "CD and ask you to insert the required one. If you do not have the requested\n" "CD at hand, just click on \"%s\", the corresponding packages will not be\n" "installed." msgstr "" "Инсталацията на Mandriva Linux е разположена на няколко CDROM-а. DrakX\n" "знае дали избран пакет не се намира на друг CDROM,така че ще извади " "текущото\n" "CD и ще ви остави да вкарате това, от което има нужда." #: help.pm:92 #, fuzzy, c-format msgid "" "It's now time to specify which programs you wish to install on your system.\n" "There are thousands of packages available for Mandriva Linux, and to make " "it\n" "simpler to manage, they have been placed into groups of similar\n" "applications.\n" "\n" "Mandriva Linux sorts package groups in four categories. You can mix and\n" "match applications from the various categories, so a ``Workstation''\n" "installation can still have applications from the ``Server'' category\n" "installed.\n" "\n" " * \"%s\": if you plan to use your machine as a workstation, select one or\n" "more of the groups in the workstation category.\n" "\n" " * \"%s\": if you plan on using your machine for programming, select the\n" "appropriate groups from that category. The special \"LSB\" group will\n" "configure your system so that it complies as much as possible with the\n" "Linux Standard Base specifications.\n" "\n" " Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n" "instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n" "of the system. However, if you do not select the \"LSB\" group you will\n" "still have a system which is nearly 100%% LSB-compliant.\n" "\n" " * \"%s\": if your machine is intended to be a server, select which of the\n" "more common services you wish to install on your machine.\n" "\n" " * \"%s\": this is where you will choose your preferred graphical\n" "environment. At least one must be selected if you want to have a graphical\n" "interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group.\n" "\n" "You can check the \"%s\" box, which is useful if you're familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" "\n" "If you start the installation in \"%s\" mode, you can deselect all groups\n" "and prevent the installation of any new packages. This is useful for\n" "repairing or updating an existing system.\n" "\n" "If you deselect all groups when performing a regular installation (as\n" "opposed to an upgrade), a dialog will pop up suggesting different options\n" "for a minimal installation:\n" "\n" " * \"%s\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"%s\": installs the base system plus basic utilities and their\n" "documentation. This installation is suitable for setting up a server.\n" "\n" " * \"%s\": will install the absolute minimum number of packages necessary\n" "to get a working Linux system. With this installation you will only have a\n" "command-line interface. The total size of this installation is about 65\n" "megabytes." msgstr "" "Сега е моментът да определите кои програми искате да бъдат инсталирани на\n" "системата ви. В Mandriva Linux дистрибуцията има хиляди пакети, но не е\n" "задължително да ги знаете наизуст.\n" "\n" "Ако извършвате стандартна инстлация от CDROM, първо ще бъдете попитани кои\n" "CD-та имате (в Експертен режим). Проверете заглавията на CD-тата и посочете\n" "кутийките съответстващи на CD-тата, с които разполагате. Цъкнете \"OK\",\n" "когато сте готови да продължите.\n" "\n" "Пакетите са подредени в групи съответстващи на практическата употреба на\n" "машината ви. Групите, сами по себе си, са подредени в четири секции:\n" "\n" " * \"Работна станция\": ако смятате да използвате машината си като работна " "станция,\n" "изберете една или повече съответните групи.\n" "\n" " * \"Разработка\": ако машината ви ще бъде използване за програмиране, " "изберете\n" "желаната(ите) група(и).\n" "\n" " * \"Сървър\": накрая, ако машината ви ще бъде използвана за сървър, ще\n" "можете да изберете кои от най-често използваните услуги искате да имате\n" "инсталирани на машината.\n" "\n" " * \"Графична среда\": тук можете да изберете предпочитаната графична " "среда.\n" "Поне една трябва да бъде избрана, ако искате да имате графична среда !\n" "\n" "Премествайки курсора на мишната над името на групата, ще видите кратък\n" "обясненителен текст за нея.\n" "\n" "Можете да цъкнете кутийката \"Индивидуален избор на пакети\", която е " "полезна,\n" "ако сте запознати с пакетите, които ще ви бъдат предложени или ако искате " "да\n" "имате пълен контрол над това, което да бъде инсталирано.\n" "\n" "Ако сте започнали инсталацията в режим на \"Обновяване\", можете да " "изключите\n" "всички групи, за да избегнете инсталирането на нови пакети. Това е полезно\n" "при поправка или обновяване на съществуващата система." #: help.pm:146 share/compssUsers.pl:24 #, c-format msgid "Workstation" msgstr "Работна станция" #: help.pm:146 share/compssUsers.pl:65 share/compssUsers.pl:167 #: share/compssUsers.pl:169 #, c-format msgid "Development" msgstr "Разработка" #: help.pm:146 share/compssUsers.pl:145 #, c-format msgid "Graphical Environment" msgstr "Графична среда" #: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:646 #, c-format msgid "Individual package selection" msgstr "Избиране на пакети един по един" #: help.pm:146 help.pm:588 #, c-format msgid "Upgrade" msgstr "Обновяване" #: help.pm:146 install_steps_interactive.pm:604 #, c-format msgid "With X" msgstr "С X" #: help.pm:146 #, c-format msgid "With basic documentation" msgstr "С базова документация" #: help.pm:146 #, c-format msgid "Truly minimal install" msgstr "Наистина минимална инсталация" #: help.pm:149 #, fuzzy, c-format msgid "" "If you choose to install packages individually, the installer will present\n" "a tree containing all packages classified by groups and subgroups. While\n" "browsing the tree, you can select entire groups, subgroups, or individual\n" "packages.\n" "\n" "Whenever you select a package on the tree, a description will appear on the\n" "right to let you know the purpose of that package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you'll be asked to confirm that you really want those servers to be\n" "installed. By default Mandriva Linux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that\n" "security holes were discovered after this version of Mandriva Linux was\n" "finalized. If you do not know what a particular service is supposed to do " "or\n" "why it's being installed, then click \"%s\". Clicking \"%s\" will install\n" "the listed services and they will be started automatically at boot time. !!\n" "\n" "The \"%s\" option is used to disable the warning dialog which appears\n" "whenever the installer automatically selects a package to resolve a\n" "dependency issue. Some packages depend on others and the installation of\n" "one particular package may require the installation of another package. The\n" "installer can determine which packages are required to satisfy a dependency\n" "to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert the floppy disk created at the end of\n" "another installation. See the second tip of the last step on how to create\n" "such a floppy." msgstr "" "Накрая, в зависимост от избора ви дали да избирате пакети един по един, ще\n" "ви бъде представено дърво съдържащо всички пакети подредени по групи и\n" "подргрупи. Докато обхождате дървото, можете да изберете цели групи, " "подгрупи\n" "или отделни пакети.\n" "\n" "Когато посочите пакет от дървото, ще се появи описание вдясно. Когато\n" "изборът е приключен, цъкнете бутона \"Инсталирай\", който ще пусне процеса\n" "на инсталация. В зависимост от скоростта на хардуера ви и броя на пакетите,\n" "които искате да бъдат инсталирани, процесът може да отнеме известно време.\n" "Очакваното време за приключване на процеса, че бъде показано на екрата, за\n" "да ви помогне да прецените дали имате достатъчно време да се насладите на\n" "чаша кафе.\n" "\n" "!! Ако е избран сървърен пакет, било то умишлено или защото е част от цяла\n" "група, ще бъдете помолени за потвърждение, че наистина искате този сървър\n" "да бъде инсталиран. В Mandriva Linux, всички сървъри тръгват по " "подразбиране\n" "при зареждане.Даже ако са сигурни и нямат известни проблеми, когато\n" "дистрибуцията се разпространява, може да се случи така, че да се появят\n" "дупки в сигурността, след като версията на Mandriva Linux е завършена. Ако\n" "не знаете за какво служи определена услуга или защо е инсталирана, цъкнете\n" "\"Не\". С цъкане на \"Да\" ще инсталирате изброени услуги и те ще бъдат\n" "стартирани автоматично по подразбиране. !!\n" "\n" "Опцията \"Автоматични зависимости\" изключва предупредителните диалози,\n" "когато инсталаторът авоматично реши избере пакет. Това се случва, защото\n" "е решил, че се нуждае да задоволи зависимост с друг пакет, за да приключи\n" "успешно инсталацията.\n" "\n" "Малката иконка на дискетка в дъното на списъка позволява да заредите списък\n" "с пакети от предишна инсталация. Ако цъкнете на тази иконка, ще бъдете\n" "помолени да вкарате дискета създадена преди това в края на друга " "инсталация.\n" "Вижте втората подсказка по време на последната стъпка, за това как да\n" "създадете такава дискета." #: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:945 #: interactive.pm:161 modules/interactive.pm:71 standalone/drakbackup:2515 #: standalone/draksec:54 standalone/harddrake2:312 ugtk2.pm:898 wizards.pm:156 #, c-format msgid "No" msgstr "Не" #: help.pm:180 help.pm:285 help.pm:444 install_any.pm:945 interactive.pm:161 #: modules/interactive.pm:71 printer/printerdrake.pm:883 #: printer/printerdrake.pm:898 standalone/drakbackup:2515 #: standalone/draksec:55 standalone/harddrake2:311 ugtk2.pm:898 wizards.pm:156 #, c-format msgid "Yes" msgstr "Да" #: help.pm:180 #, c-format msgid "Automatic dependencies" msgstr "" #: help.pm:183 #, c-format msgid "" "\"%s\": clicking on the \"%s\" button will open the printer configuration\n" "wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" "information on how to set up a new printer. The interface presented in our\n" "manual is similar to the one used during installation." msgstr "" #: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:595 #: standalone/drakbackup:2339 standalone/drakbackup:2343 #: standalone/drakbackup:2347 standalone/drakbackup:2351 #: standalone/drakroam:227 #, c-format msgid "Configure" msgstr "Настрока" #: help.pm:189 #, fuzzy, c-format msgid "" "This dialog is used to select which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all services available on the current installation. Review\n" "each one of them carefully and uncheck those which are not needed at boot\n" "time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you're not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you probably do not want to start any services which you do not " "need.\n" "Please remember that some services can be dangerous if they're enabled on a\n" "server. In general, select only those services you really need. !!" msgstr "" "Сега можете да изберете кои услуги да се пускат при стартиране.\n" "\n" "Тук са представени всички услуги, достъпни с настоящата инсталация.\n" "Прегледайте ги внимателно и изключете тези, които не ви трябват винаги при " "стартиране.\n" "\n" "Можете да видите кратък обяснителен текст за услугата, като поставите курора " "на мишката си\n" "над името на услугата. Ако не сте сигурни, дали услугата е полезна или не, " "по-добре\n" "е да оставите избора по подразбиране.\n" "\n" "Внимавайте с тази стъпка, ако смятате да използвате машината си като " "сървър:\n" "сигурно не бихте искали да пускате услуги, от които не се нуждаете. Моля,\n" "запомнете, че някои услуги могат да бъдат опасни, ако са включени на " "сървъра.\n" "По принцип, избирайте само услугите, от които наистина се нуждаете.\n" "!!" #: help.pm:206 #, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"%s\", which will let GNU/Linux know that the system clock and the\n" "hardware clock are in the same time zone. This is useful when the machine\n" "also hosts another operating system.\n" "\n" "The \"%s\" option will automatically regulate the system clock by\n" "connecting to a remote time server on the Internet. For this feature to\n" "work, you must have a working Internet connection. We recommend that you\n" "choose a time server located near you. This option actually installs a time\n" "server which can be used by other machines on your local network as well." msgstr "" #: help.pm:217 install_steps_interactive.pm:888 #, c-format msgid "Hardware clock set to GMT" msgstr "Хадруерният ви часовник е настроен по GMT" #: help.pm:217 #, c-format msgid "Automatic time synchronization" msgstr "Автоматична синхронизация на времето" #: help.pm:220 #, c-format msgid "" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs." msgstr "" #: help.pm:231 #, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n" "\n" "You'll see a list of different parameters to change to get an optimal\n" "graphical display.\n" "\n" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer.\n" "\n" "\n" "\n" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture.\n" "\n" "\n" "\n" "Test\n" "\n" " Depending on your hardware, this entry might not appear.\n" "\n" " The system will try to open a graphical screen at the desired\n" "resolution. If you see the test message during the test and answer \"%s\",\n" "then DrakX will proceed to the next step. If you do not see it, then it\n" "means that some part of the auto-detected configuration was incorrect and\n" "the test will automatically end after 12 seconds and return you to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" #: help.pm:288 #, c-format msgid "" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer." msgstr "" #: help.pm:295 #, c-format msgid "" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture." msgstr "" #: help.pm:303 #, c-format msgid "" "In the situation where different servers are available for your card, with\n" "or without 3D acceleration, you're asked to choose the server which best\n" "suits your needs." msgstr "" #: help.pm:308 #, fuzzy, c-format msgid "" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" "Накрая, ще бъдете попитани дали искате да виждате графичния интерфейс при\n" "зареждане. Отбележете, че този въпрос ще ви бъде зададен даже ако изберете,\n" "да не тествате настройката. Очевидно, бихте отговорили с \"Не\", ако " "машината\n" "ще работи като сървър или ако няма успешно настроен дисплей." #: help.pm:316 #, fuzzy, c-format msgid "" "You now need to decide where you want to install the Mandriva Linux\n" "operating system on your hard drive. If your hard drive is empty or if an\n" "existing operating system is using all the available space you will have to\n" "partition the drive. Basically, partitioning a hard drive means to\n" "logically divide it to create the space needed to install your new\n" "Mandriva Linux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to data losses, partitioning can be intimidating and stressful\n" "for the inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on the configuration of your hard drive, several options are\n" "available:\n" "\n" " * \"%s\". This option will perform an automatic partitioning of your blank\n" "drive(s). If you use this option there will be no further prompts.\n" "\n" " * \"%s\". The wizard has detected one or more existing Linux partitions on\n" "your hard drive. If you want to use them, choose this option. You will then\n" "be asked to choose the mount points associated with each of the partitions.\n" "The legacy mount points are selected by default, and for the most part it's\n" "a good idea to keep them.\n" "\n" " * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n" "all the space available on it, you will have to create free space for\n" "GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n" "data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n" "FAT or NTFS partition. Resizing can be performed without the loss of any\n" "data, provided you've previously defragmented the Windows partition.\n" "Backing up your data is strongly recommended. Using this option is\n" "recommended if you want to use both Mandriva Linux and Microsoft Windows on\n" "the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "than when you started. You'll have less free space under Microsoft Windows\n" "to store your data or to install new software.\n" "\n" " * \"%s\". If you want to delete all data and all partitions present on\n" "your hard drive and replace them with your new Mandriva Linux system, " "choose\n" "this option. Be careful, because you will not be able to undo this " "operation\n" "after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"%s\". This option appears when the hard drive is entirely taken by\n" "Microsoft Windows. Choosing this option will simply erase everything on the\n" "drive and begin fresh, partitioning everything from scratch.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"%s\". Choose this option if you want to manually partition your hard\n" "drive. Be careful -- it is a powerful but dangerous choice and you can very\n" "easily lose all your data. That's why this option is really only\n" "recommended if you have done something like this before and have some\n" "experience. For more instructions on how to use the DiskDrake utility,\n" "refer to the ``Managing Your Partitions'' section in the ``Starter Guide''." msgstr "" "В този момент трябва изберете къде на твърдия си диска да инсталирате " "вашата\n" "Mandriva Linux операционна система. Ако твърдият ви диск е празен или друга\n" "операционна система използва цялото пространство, ще трябва да го " "разделите.\n" "Казано простичко, разделянето на твърдия диск се състои в логическо " "разделяне\n" "цел да се създаде място за инсталация на новата Mandriva Linux система.\n" "\n" "Тъй като процесът на разделяне обикновено е необратим, разделянето може да\n" "изглежда плашещ и стряскащ, ако сте неопитен потребител. Слава Богу, има\n" "магьосник, който опростява този процес. Преди да започнете, консултирайте " "се\n" "с ръководството и не бързайте.\n" "\n" "Ако пускате инсталацията в Експертен режим, ще бъдете въведени в DiskDrake,\n" "разделящия инструмент на Mandriva Linux, който ви позволява да донастроите\n" "дяловете си. Вижте главата DiskDrake от ръководството. От инсталационния\n" "интерфейс можете да използвате магьосниците, като натиснете бутона\n" "\"Магьосник\" на диалога.\n" "\n" "Ако дяловете са вече определени, дали от предишна инсталация или от друг\n" "иструмент за разделяне, просто изберете на кой да инсталирате Linux\n" "системата.\n" "\n" "Ако дяловете не са определени, ще трябва да създадете такива използвайки\n" "магьосника. В зависимост от настройката на твърдия диск, са възможни " "няколко\n" "опции:\n" "\n" " * \"%s\" тази опция просто ще доведе до автоматично поделяне на празното " "пространство на твърдия ви диск. Няма да бъдете питани за това.\n" "\n" " * \"%s\": магьосникът е засякъл един или повече\n" "съществуващи Linux дялове на твърдия ви диск. Ако искате да ги използвате,\n" "изберете тази опция.\n" "\n" " * \"%s\": ако имате инсталиран\n" "Microsoft Windows на твърдия си диск и той заема цялото достъпно\n" "пространство на него, трябва да освободите място за Linux данни. За да\n" "направитетова, можете да изтриете Microsoft Windows дяла и данните (вижте\n" "решенията \"Изтрий целия диск\" или \"Екпертен режим\") или да промените\n" "големината на Microsoft Windows дяла. Промяната на големината може да бъде\n" "извършена без загуба на данни. Това решение се препоръчва, ако искате\n" "едновременно Mandriva Linux и Microsoft Windows на един и същи компютър.\n" "\n" " Преди да изберете тази опция, моля, разберете, че след тази процедура,\n" "големината на Microsoft Windows дяла ще бъде по-малка, отколкото преди " "това.\n" "Ще имате по-малко място под Microsoft Windows за съхраняване на данни или " "за\n" "инсталира на нов софтуер.\n" "\n" " * \"%s\": ако искате да изтриете всички данни и дялове, които\n" "съществуват на вашия твърд диск и да ги замените с новата Mandriva Linux\n" "система, изберете тази опция. Бъдете внимателни с това решения, защото няма\n" "да можете да върнете обратно избора си, след като потвърдите.\n" "\n" " !! Ако изберете тази опция, всички данни на диска ви ще бъдат " "загубени !!\n" "\n" " * \"%s\": Това просто ще изтрие всичко на диска и ще започне на\n" "чисто, разделяне от раз. Всякакви данни на диска ви ще бъдат загубени.\n" "\n" " !! Ако изберете тази опция, всички данни на диска ви ще бъдат " "загубени !!\n" "\n" " * \"%s\": изберете тази опция, ако искате ръчно да разделите\n" "твърдия си диск. Бъдете внимателни - това е мощен, но опасен избор. Можете\n" "много лесно да загубите всички данни. Така че не избирайте това, ако не\n" "знаете какво правите." #: help.pm:374 install_interactive.pm:95 #, c-format msgid "Use free space" msgstr "Използвай свободното място" #: help.pm:374 #, c-format msgid "Use existing partition" msgstr "Изпозване на съществуващ дял" #: help.pm:374 install_interactive.pm:137 #, c-format msgid "Use the free space on the Windows partition" msgstr "Използвай свободното място на Windows дяла" #: help.pm:374 install_interactive.pm:213 #, c-format msgid "Erase entire disk" msgstr "Изтрий целия диск" #: help.pm:374 #, c-format msgid "Remove Windows" msgstr "Премахни Windows(TM)" #: help.pm:374 install_interactive.pm:228 #, c-format msgid "Custom disk partitioning" msgstr "Клиентско разделяне на диска" #: help.pm:377 #, fuzzy, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n" "to remove the installation media (CD-ROM or floppy). The first thing you\n" "should see after your computer has finished doing its hardware tests is the\n" "boot-loader menu, giving you the choice of which operating system to start.\n" "\n" "The \"%s\" button shows two more buttons to:\n" "\n" " * \"%s\": enables you to create an installation floppy disk which will\n" "automatically perform a whole installation without the help of an operator,\n" "similar to the installation you've just configured.\n" "\n" " Note that two different options are available after clicking on that\n" "button:\n" "\n" " * \"%s\". This is a partially automated installation. The partitioning\n" "step is the only interactive procedure.\n" "\n" " * \"%s\". Fully automated installation: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing on a number of similar\n" "machines. See the Auto install section on our web site for more\n" "information.\n" "\n" " * \"%s\"(*): saves a list of the packages selected in this installation.\n" "To use this selection with another installation, insert the floppy and\n" "start the installation. At the prompt, press the [F1] key, type >>linux\n" "defcfg=\"floppy\"<< and press the [Enter] key.\n" "\n" "(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n" "\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n" "/dev/fd0\"." msgstr "" "А така ! Инсталацията е завършена и GNU/Linux системата ви е готова за\n" "употреба. Просто цъкнете \"OK\", за да рестартирате системата. Можете да\n" "стартирате GNU/Linux или Windows, което предпочитате (ако имате две " "системи),\n" "веднага след като компютърът стартира отново.\n" "\n" "Бутона \"Напредничав\" (само в \"Експертен\") показва още два бутона за:\n" "\n" " * \"генериране на дискета за автоматична инсталация\": за да създадете\n" "инсталационна дискета, която след това автоматично да изчършва цялата\n" "инсталация без помощта на оператор, приличаща на инсталацията, която току-" "що\n" "сте извършили.\n" "\n" " Отбележете, че две различни опции са достъни, чрез цъкане на бутона:\n" "\n" " * \"Преиграй\". Това е частично автоматизирана инсталация като стъпките\n" "по разделяне на дялове остават интерактивни.\n" "\n" " * \"Автоматична\". Напълно автоматична инсталация: твърдият диск се\n" "презаписва напълно, всякакви данни се загубват.\n" "\n" " Тази особеност е много удобна, когато инсталирате голям брой подобно\n" "машини. Вижте секцията за автоматична инсталация на нашия web-сайт.\n" "\n" " * \"Запази избора на пакети\"(*): запазва избора на пакети, така както " "е\n" "направен преди. Когато правите друга инсталация, вкарайте дискетата в\n" "устройството и пуснете инсталацията да върви чрез помощния екран, като\n" "натиснете клавиша [F1] и като напишете >>linux defcfg=\"floppy\"<<.\n" "\n" "(*) Трябва ви FAT-форматирана дискета (за да създадете таква под GNU/Linux,\n" "напишете \"mformat a:\")" #: help.pm:409 #, fuzzy, c-format msgid "Generate auto-install floppy" msgstr "Подготвя дискета за автоматична инсталация" #: help.pm:409 install_steps_interactive.pm:1343 #, c-format msgid "Replay" msgstr "Повтори" #: help.pm:409 install_steps_interactive.pm:1343 #, c-format msgid "Automated" msgstr "Автоматизиран" #: help.pm:409 install_steps_interactive.pm:1346 #, c-format msgid "Save packages selection" msgstr "Запази избор на пакети" #: help.pm:412 #, fuzzy, c-format msgid "" "If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n" "reformat some of them and erase any data they contain. To do so, please\n" "select those partitions as well.\n" "\n" "Please note that it's not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to " "reformat\n" "partitions containing data that you wish to keep (typically \"/home\").\n" "\n" "Please be careful when selecting partitions. After the formatting is\n" "completed, all data on the selected partitions will be deleted and you\n" "will not be able to recover it.\n" "\n" "Click on \"%s\" when you're ready to format the partitions.\n" "\n" "Click on \"%s\" if you want to choose another partition for your new\n" "Mandriva Linux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions which will be checked for\n" "bad blocks on the disk." msgstr "" "Всички новодефинирани дялове трябва да бъдат форматирани, за да се " "използват\n" "(форматиране означава създаване на файлова система).\n" "\n" "В този момента може би искате да преформатирате някои съществуващи дялове, " "за\n" "да изтриете всякакви данни, които съдържат. Ако искате да го направите, " "моля\n" "изберете тях.\n" "\n" "Моля, отбележете, че не е необходимо да преформатирате всички дялове\n" "съществуващи отпреди. Трябва да преформатирате дяловете съдържащи\n" "операционната система (като \"/\", \"/usr\" или \"/var\"), но това не е\n" "задължително за дялове съдържащи данни, които искате да запазите " "(обикновено\n" "\"/home\").\n" "\n" "Моля, бъдете внимателни, когато избирате дяловете. След форматиране всички\n" "данни на посочените дялове ще бъдат изтрити и няма да можете да ги\n" "възстановите.\n" "\n" "Цъкнете \"OK\", когато сте готови да форматирате далове.\n" "\n" "Цъкнете \"Отказ\", ако искате да изберете други дялове за инсталация на " "новата\n" "си Mandriva Linux операционна система.\n" "\n" "Цъкнете \"Напредничав\", ако искате да изберете дялове, които да бъдат\n" "проверени за лоши блокове от диска." #: help.pm:431 install_steps_gtk.pm:392 interactive.pm:437 #: interactive/newt.pm:318 printer/printerdrake.pm:3971 #: standalone/drakTermServ:363 standalone/drakbackup:3912 #: standalone/drakbackup:3951 standalone/drakbackup:4062 #: standalone/drakbackup:4077 ugtk2.pm:488 #, c-format msgid "Previous" msgstr "Предишен" #: help.pm:434 #, c-format msgid "" "By the time you install Mandriva Linux, it's likely that some packages will\n" "have been updated since the initial release. Bugs may have been fixed,\n" "security issues resolved. To allow you to benefit from these updates,\n" "you're now able to download them from the Internet. Check \"%s\" if you\n" "have a working Internet connection, or \"%s\" if you prefer to install\n" "updated packages later.\n" "\n" "Choosing \"%s\" will display a list of web locations from which updates can\n" "be retrieved. You should choose one near to you. A package-selection tree\n" "will appear: review the selection, and press \"%s\" to retrieve and install\n" "the selected package(s), or \"%s\" to abort." msgstr "" #: help.pm:444 help.pm:588 install_steps_gtk.pm:391 #: install_steps_interactive.pm:157 standalone/drakbackup:4109 #, c-format msgid "Install" msgstr "Инсталирай" #: help.pm:447 #, fuzzy, c-format msgid "" "At this point, DrakX will allow you to choose the security level you desire\n" "for your machine. As a rule of thumb, the security level should be set\n" "higher if the machine is to contain crucial data, or if it's to be directly\n" "exposed to the Internet. The trade-off that a higher security level is\n" "generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, keep the default option. You'll be able\n" "to change it later with the draksec tool, which is part of Mandriva Linux\n" "Control Center.\n" "\n" "Fill the \"%s\" field with the e-mail address of the person responsible for\n" "security. Security messages will be sent to that address." msgstr "" "В този момент, трябва да изберете нивото на сигурност, което искате за\n" "машината. По правило, колкото повече машината ви е достъпна и колкото " "повече\n" "данни се съхраняват на нея, толкова по-високо трябва да е нивото на " "сигурност.\n" "Въпреки това, високата сигурност е за сметка на лекотата на работа.\n" "Обърнете се към главата MSEC на Reference Manual, за да получите повече " "информация\n" "за значението на тези нива.\n" "\n" "Ако не знаете както да изберете, изберете опцията по подразбиране." #: help.pm:458 #, fuzzy, c-format msgid "Security Administrator" msgstr "Администратор по защита:" #: help.pm:461 #, fuzzy, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandriva Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or by another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"%s\": this option deletes all partitions on the selected hard drive\n" "\n" " * \"%s\": this option enables you to automatically create ext3 and swap\n" "partitions in the free space of your hard drive\n" "\n" "\"%s\": gives access to additional features:\n" "\n" " * \"%s\": saves the partition table to a floppy. Useful for later\n" "partition-table recovery if necessary. It is strongly recommended that you\n" "perform this step.\n" "\n" " * \"%s\": allows you to restore a previously saved partition table from a\n" "floppy disk.\n" "\n" " * \"%s\": if your partition table is damaged, you can try to recover it\n" "using this option. Please be careful and remember that it does not always\n" "work.\n" "\n" " * \"%s\": discards all changes and reloads the partition table that was\n" "originally on the hard drive.\n" "\n" " * \"%s\": un-checking this option will force users to manually mount and\n" "unmount removable media such as floppies and CD-ROMs.\n" "\n" " * \"%s\": use this option if you wish to use a wizard to partition your\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": use this option to cancel your changes.\n" "\n" " * \"%s\": allows additional actions on partitions (type, options, format)\n" "and gives more information about the hard drive.\n" "\n" " * \"%s\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "В този момент трябва да изберете кой дялове да бъдат използвани за " "инсталация\n" "на вашата Mandriva Linux система. Ако дяловете вече са определени, дали от\n" "предишна инсталация на GNU/Linux или от друг инструмент за разделяне, " "можете\n" "да използвате съществуващите далове. В противен случай трябва да определите\n" "дялове от твърдия диск.\n" "\n" "За да създадете дялове, трябва първо да изберете твърд диск. Можете да\n" "изберете диск за разделяне, като цъкнете на \"hda\" за първо IDE " "устройство,\n" "\"hdb\" за второто, \"sda\" за първо SCSI устройство и т.н..\n" "\n" "За да разделите избрания твър диск, можете да използвате следния опции:\n" "\n" " * \"Изчисти всичко\": тази опция изтрива всички дялове на избрания диск.\n" "\n" " * \"Автоматично създаване\": тази опция позволява автоматично да съзадете\n" "Ext2 и swap дялове в свободното пространство на твърдия ви диск.\n" "\n" " * \"Спаси таблицата с дялове\": ако таблицата с дялове е повредена, можете\n" "да се опитате да я възстановите с тази опция. Моля, бъдете внимателни и\n" "помнете, че може да не стане.\n" "\n" " * \"Върни\": използвайте тази опция, за да отмените промените.\n" "\n" " * \"Презареди\": можете да използвате тази опция, ако искате да върнете\n" "всички промени и да заредите първоначалната таблица с дялове.\n" "\n" " * \"Магьосник\": използвайте тази опция, ако искате да използвате " "магьосник,\n" "да раздели твърдия ви диск. Това се препоръчва, ако нямате достатъчно " "познания\n" "за разделянето.\n" "\n" " * \"Възстанови от дискета\": тази опция ще ви позволи да възстановите " "запазена\n" "преди това на дискета таблица с дялове.\n" "\n" " * \"Запази на дискета\": запазва таблицата с дялове на дискета. Полезно е " "при\n" "евентуално възстановяване на таблицата при необходимост. Силно се " "препоръчва\n" "да направите това.\n" "\n" " * \"Готово\": когато сте свършили с разделянето на твърдия си диск, това " "ще\n" "запише промените върху диска.\n" "\n" "Забележета: можете да достигнете всяка опция използвайки клавиатурата.\n" "Минавайте през дяловете използвайки [Tab} и стрелките нагоре/надолу.\n" "\n" "Когато е избран дял, можете да използвате:\n" "\n" " * Ctrl-c, за да създадете нов дял (ако е избран празен дял);\n" "\n" " * Ctrl-d, за да изтриете дял;\n" "\n" " * Ctrl-m, за да установите точка на монтиране.\n" "\n" "Ако инсталите на PPC машина, сигурно ще искате да създадете малък HFS\n" "\"bootstrap\" дял от поне 1 МБ, който ще бъде използват от boot loader-ът\n" "yaboot. Ако смятате да направите дяла по-голям, например 50 МБ, можете да " "го\n" "намерите за полезно място, където да съхранявате някое ядро или image на\n" "ramdisk в случай на извънредни ситуации." #: help.pm:530 #, fuzzy, c-format msgid "Removable media auto-mounting" msgstr "Автоматично монтиране на сменяем носител" #: help.pm:530 #, c-format msgid "Toggle between normal/expert mode" msgstr "Премини в нормален/експертен режим" #: help.pm:533 #, fuzzy, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one which you want to resize in order to install your new\n" "Mandriva Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "Беше засечен повече от един Microsoft Windows дял\n" "на твърдия ви диска. Изберете този, чиято дължина искате да промените, за " "да\n" "инсталирате Mandriva Linux операционна система.\n" "\n" "\n" "За информация, всеки дял е изброен както следва: \"Linux име\", \"Windows име" "\", \"Капацитет\".\n" "\n" "\"Linux името\" се кодира както следва: \"тип на диска\", \"номер на диска" "\",\n" "\"номер на дял\" (например, \"hda1\").\n" "\n" "\n" "\"Типът на диска\" може да е \"hd\", ако е IDE твърд диск, или \"sd\", ако " "е\n" "SCSI твърд диск.\n" "\n" "\n" "\"Номерът на диска\" винаги е буквата след \"hd\" или \"sd\". При IDE " "дискове:\n" "\n" " * \"a\" означава \"master диск на първия IDE контролер\",\n" " * \"b\" означава \"slave диск на първия IDE контролер\",\n" " * \"c\" означава \"master диск на втория IDE контролер\",\n" " * \"d\" означава \"slave диск на втория IDE контролер\".\n" "\n" "\n" "При SCSI устройства, \"a\" означава \"първи твърд диск\", \"b\" означава " "\"втори твърд диск\" и т.н..\n" "\n" "\"Windows името\" е буквата на твърдия ви диск под Windows (първият диск " "или\n" "дял се нарича \"C:\")." #: help.pm:564 #, c-format msgid "" "\"%s\": check the current country selection. If you're not in this country,\n" "click on the \"%s\" button and choose another. If your country is not in " "the\n" "list shown, click on the \"%s\" button to get the complete country list." msgstr "" #: help.pm:569 #, c-format msgid "" "This step is activated only if an existing GNU/Linux partition has been\n" "found on your machine.\n" "\n" "DrakX now needs to know if you want to perform a new installation or an\n" "upgrade of an existing Mandriva Linux system:\n" "\n" " * \"%s\". For the most part, this completely wipes out the old system.\n" "However, depending on your partitioning scheme, you can prevent some of\n" "your existing data (notably \"home\" directories) from being over-written.\n" "If you wish to change how your hard drives are partitioned, or to change\n" "the file system, you should use this option.\n" "\n" " * \"%s\". This installation class allows you to update the packages\n" "currently installed on your Mandriva Linux system. Your current " "partitioning\n" "scheme and user data will not be altered. Most of the other configuration\n" "steps remain available and are similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n" "running version \"8.1\" or later. Performing an upgrade on versions prior\n" "to Mandriva Linux version \"8.1\" is not recommended." msgstr "" #: help.pm:591 #, fuzzy, c-format msgid "" "Depending on the language you chose (), DrakX will automatically select a\n" "particular type of keyboard configuration. Check that the selection suits\n" "you or choose another keyboard layout.\n" "\n" "Also, you may not have a keyboard which corresponds exactly to your\n" "language: for example, if you are an English-speaking Swiss native, you may\n" "have a Swiss keyboard. Or if you speak English and are located in Quebec,\n" "you may find yourself in the same situation where your native language and\n" "country-set keyboard do not match. In either case, this installation step\n" "will allow you to select an appropriate keyboard from a list.\n" "\n" "Click on the \"%s\" button to be shown a list of supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding which will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" "Обикновено, DrakX би трябвало да избере правилната за вас клавиатура (в " "зависимост\n" "от езика, който сте избрали) и няма да се наложи да видите тази стъпка. " "Обаче може да\n" "нямате клавиатура съответстваща точно на вашия език: например, ако сте " "англоговорящ швед,\n" "може би ще искате клавиатурата ви да бъде шведска. Или ако говорите " "английски, но сте\n" "в Квебек, може би ще сте в същата ситуация. И в двата случая, ще трябва да " "се върнете\n" "към тази инсталационна стъпка и да изберете правилната клавиатура от " "списъка.\n" "\n" "Всичко, което трябва да направите, е да посочите предпочитаната клавиатурна " "наредба\n" "от списъка, който ще се появи пред вас.\n" "\n" "Ако имате клавиатура от език различен от този използван по подразбиране, " "цъкнете\n" "на бутона \"Напредничав\". Ще ви бъде предоставен пълен списък с " "поддържаните клавиатури." #: help.pm:609 #, fuzzy, c-format msgid "" "The first step is to choose your preferred language.\n" "\n" "Your choice of preferred language will affect the installer, the\n" "documentation, and the system in general. First select the region you're\n" "located in, then the language you speak.\n" "\n" "Clicking on the \"%s\" button will allow you to select other languages to\n" "be installed on your workstation, thereby installing the language-specific\n" "files for system documentation and applications. For example, if Spanish\n" "users are to use your machine, select English as the default language in\n" "the tree view and \"%s\" in the Advanced section.\n" "\n" "About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n" "cover all existing languages. However full support for it in GNU/Linux is\n" "still under development. For that reason, Mandriva Linux's use of UTF-8 " "will\n" "depend on the user's choices:\n" "\n" " * If you choose a language with a strong legacy encoding (latin1\n" "languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n" "iso-8859-2 languages), the legacy encoding will be used by default;\n" "\n" " * Other languages will use unicode by default;\n" "\n" " * If two or more languages are required, and those languages are not using\n" "the same encoding, then unicode will be used for the whole system;\n" "\n" " * Finally, unicode can also be forced for use throughout the system at a\n" "user's request by selecting the \"%s\" option independently of which\n" "languages were been chosen.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several, or even install them all by selecting the \"%s\" box.\n" "Selecting support for a language means translations, fonts, spell checkers,\n" "etc. will also be installed for that language.\n" "\n" "To switch between the various languages installed on your system, you can\n" "launch the \"localedrake\" command as \"root\" to change the language used\n" "by the entire system. Running the command as a regular user will only\n" "change the language settings for that particular user." msgstr "" "Моля, цъкнете на предпочитания език на инсталация и системна употреба.\n" "\n" "Цъкането на бутона \"Напредничав\" ще ви позволи да изберете други езици\n" "да бъдат инсталирани на работната ви станция. Избирането на други езици\n" "ще инсталира файлове специвични за езиците за системна документация и\n" "приложения. Например, ако имате потребители от Изпания на машината си,\n" "изберете английски като главен език в дървовидната форма и в секция\n" "\"Напредничав\" цъкнете на сивата звезда съответстваща на\n" "\"Испански|Испания\".\n" "Отбележете, че могат да бъдат инсталирани няколко езика. Веднъж избран\n" "някакъв локал, цъкнете бутона \"OK\", за да продължите." #: help.pm:647 #, c-format msgid "Espanol" msgstr "" #: help.pm:650 #, fuzzy, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be obtained by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n" "mouse. DrakX will then configure your mouse so that you can simulate the\n" "wheel with it: to do so, press the middle button and move your mouse\n" "pointer up and down.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the list provided.\n" "\n" "You can select the \"%s\" entry to chose a ``generic'' mouse type which\n" "will work with nearly all mice.\n" "\n" "If you choose a mouse other than the default one, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and\n" "you will be returned to the mouse list.\n" "\n" "Occasionally wheel mice are not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"%s\" button, a mouse image will be displayed on-screen.\n" "Scroll the mouse wheel to ensure that it is activating correctly. As you\n" "scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n" "Test the buttons and check that the mouse pointer moves on-screen as you\n" "move your mouse about." msgstr "" "По подразбиране, DrakX предполага че имате двубутонна мишка и ще включи\n" "симулиране на три бутона. DrakX автоматично разбира дали е PS/2, серийна " "или\n" "USB мишка.\n" "\n" "Ако искате да определите друг тип на мишката, изберете подходящ от списъка,\n" "който ще ви бъде представен.\n" "\n" "Ако изберете мишка различна от тази по подразбиране, ще ви бъде предоставен\n" "екран за проба. Използвайте бутоните и колелцето, за да проверите, че\n" "настройката е дора. Ако мишката не работи, както трябва, натиснете интервал\n" "или СЕ ВЪРНЕТЕ към \"Отказ\" и изберете пак." #: help.pm:681 #, fuzzy, c-format msgid "with Wheel emulation" msgstr "3 бутона с емулация на колелце" #: help.pm:681 #, c-format msgid "Universal | Any PS/2 & USB mice" msgstr "" #: help.pm:684 #, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "Моля, изберете верния порт. Например, портът COM1 под Windows под GNU/Linux\n" "се нарича ttyS0." #: help.pm:688 #, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you must enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only user authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That's why you must choose a password which is difficult to\n" "guess: DrakX will tell you if the password you chose is too simple. As you\n" "can see, you're not forced to enter a password, but we strongly advise\n" "against this. GNU/Linux is just as prone to operator error as any other\n" "operating system. Since \"root\" can overcome all limitations and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves, it is important that it be difficult to become\n" "\"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it far\n" "too easy to compromise your system.\n" "\n" "One caveat: do not make the password too long or too complicated because " "you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it. To reduce the\n" "chance of a blind typing error you'll need to enter the password twice. If\n" "you do happen to make the same typing error twice, you'll have to use this\n" "``incorrect'' password the first time you'll try to connect as \"root\".\n" "\n" "If you want an authentication server to control access to your computer,\n" "click on the \"%s\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one for \"%s\". If you do not know which\n" "one to use, you should ask your network administrator.\n" "\n" "If you happen to have problems with remembering passwords, or if your\n" "computer will never be connected to the Internet and you absolutely trust\n" "everybody who uses your computer, you can choose to have \"%s\"." msgstr "" #: help.pm:722 #, c-format msgid "authentication" msgstr "идентификация" #: help.pm:725 #, c-format msgid "" "A boot loader is a little program which is started by the computer at boot\n" "time. It's responsible for starting up the whole system. Normally, the boot\n" "loader installation is totally automated. DrakX will analyze the disk boot\n" "sector and act according to what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n" "boot sector. This way you'll be able to load either GNU/Linux or any other\n" "OS installed on your machine.\n" "\n" " * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n" "\n" "If DrakX can not determine where to place the boot sector, it'll ask you\n" "where it should place it. Generally, the \"%s\" is the safest place.\n" "Choosing \"%s\" will not install any boot loader. Use this option only if " "you\n" "know what you're doing." msgstr "" #: help.pm:742 #, fuzzy, c-format msgid "" "Now, it's time to select a printing system for your computer. Other\n" "operating systems may offer you one, but Mandriva Linux offers two. Each of\n" "the printing systems is best suited to particular types of configuration.\n" "\n" " * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"%s\"\n" "will handle only very simple network cases and is somewhat slow when used\n" "within networks.) It's recommended that you use \"pdq\" if this is your\n" "first experience with GNU/Linux.\n" "\n" " * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n" "choice for printing to your local printer or to one halfway around the\n" "planet. It's simple to configure and can act as a server or a client for\n" "the ancient \"lpd\" printing system, so it's compatible with older\n" "operating systems which may still need print services. While quite\n" "powerful, the basic setup is almost as easy as \"pdq\". If you need to\n" "emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n" "\"%s\" includes graphical front-ends for printing or choosing printer\n" "options and for managing the printer.\n" "\n" "If you make a choice now, and later find that you do not like your printing\n" "system you may change it by running PrinterDrake from the Mandriva Linux\n" "Control Center and clicking on the \"%s\" button." msgstr "" "Дойде времето да изберете система за печат за вашия компютър.Другите\n" "операционни системи може да ви предлагат една,но ние ви предлагаме две.\n" "Всяка от тях е пригодена за даден тип конфигурация.\n" "\n" " * \"%s\"-- е акроним на \"print,do not queue\"(\"пачатай,не чакай\"),е " "идеалният\n" "избор,ако имате директна връзка с принтера,искате да го контролирате,или\n" "нямате мрежови принтери.(\"%s\" може да работи само в много прости\n" "ситуации и е някак бавен,когато се ползва в мрежа.) Препоръчително е да \n" "изполвате \"pdq\" ако нямате опит с GNU/Linux. \n" " * \"%s\" - `` Common Unix Printing System``(обичайна система за печат за " "Unix)\n" "е отличен избор,за печат както на собствения ви принтер,така и на друг,на\n" "половин свят разстояние.Тя е лесна за конфигуриране и може работи като\n" "клиент или сървър на архаичната\"lpd \",което я прави напълно съвместима\n" "с по-стари операционни системи,които може все още да се нуждаят от тази\n" "услуга.Въпреки че е доста мощна,основната инсталация е почти толкова \n" "лесна,колкото и тази на \"pdq\".Ако искате да емулирате \"lpd\" сървър,\n" "уверете се,че \"cups-lpd\" демона е пуснат.\"%s\" включва графични \n" "интерфейси за пречат и избор на опции за принтера,както и за\n" "конфигурирането му.\n" "\n" "Ако сега направите избор,а по-късно разберете,че не харесвате системата\n" "си за печат,можете да я смените като пуснете PrinterDrake от Мандрива " "линукс \n" "контролия център и цъкнете на \"експерт\"." #: help.pm:765 #, c-format msgid "pdq" msgstr "" #: help.pm:765 printer/cups.pm:117 printer/data.pm:129 #, c-format msgid "CUPS" msgstr "CUPS" #: help.pm:765 #, c-format msgid "Expert" msgstr "Трудно" #: help.pm:768 #, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, you'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" #: help.pm:786 #, fuzzy, c-format msgid "" "\"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card is not the one actually present on your\n" "system, you can click on the button and choose a different driver." msgstr "" "\"%s\"ако намеря звукова карта,ще видите съобщение за това.\n" "Ако забележите,че намерената звукова карта не отговаря на истината,\n" "можете да цъкнете на бутона и да изберете друг драйвер." #: help.pm:788 help.pm:855 install_steps_interactive.pm:1020 #: install_steps_interactive.pm:1037 #, c-format msgid "Sound card" msgstr "Звукова карта" #: help.pm:791 #, c-format msgid "" "As a review, DrakX will present a summary of information it has gathered\n" "about your system. Depending on the hardware installed on your machine, you\n" "may have some or all of the following entries. Each entry is made up of the\n" "hardware item to be configured, followed by a quick summary of the current\n" "configuration. Click on the corresponding \"%s\" button to make the change.\n" "\n" " * \"%s\": check the current keyboard map configuration and change it if\n" "necessary.\n" "\n" " * \"%s\": check the current country selection. If you're not in this\n" "country, click on the \"%s\" button and choose another. If your country\n" "is not in the list shown, click on the \"%s\" button to get the complete\n" "country list.\n" "\n" " * \"%s\": by default, DrakX deduces your time zone based on the country\n" "you have chosen. You can click on the \"%s\" button here if this is not\n" "correct.\n" "\n" " * \"%s\": verify the current mouse configuration and click on the button\n" "to change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to set up a new printer. The interface\n" "presented in our manual is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card is not the one actually present on your\n" "system, you can click on the button and choose a different driver.\n" "\n" " * \"%s\": if you have a TV card, this is where information about its\n" "configuration will be displayed. If you have a TV card and it is not\n" "detected, click on \"%s\" to try to configure it manually.\n" "\n" " * \"%s\": you can click on \"%s\" to change the parameters associated with\n" "the card if you feel the configuration is wrong.\n" "\n" " * \"%s\": by default, DrakX configures your graphical interface in\n" "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" "\"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": if you wish to configure your Internet or local network access,\n" "you can do so now. Refer to the printed documentation or use the\n" "Mandriva Linux Control Center after the installation has finished to " "benefit\n" "from full in-line help.\n" "\n" " * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n" "you're installing on is to be located behind a proxy server.\n" "\n" " * \"%s\": this entry allows you to redefine the security level as set in a\n" "previous step ().\n" "\n" " * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" "idea to protect yourself from intrusions by setting up a firewall. Consult\n" "the corresponding section of the ``Starter Guide'' for details about\n" "firewall settings.\n" "\n" " * \"%s\": if you wish to change your bootloader configuration, click this\n" "button. This should be reserved to advanced users. Refer to the printed\n" "documentation or the in-line help about bootloader configuration in the\n" "Mandriva Linux Control Center.\n" "\n" " * \"%s\": through this entry you can fine tune which services will be run\n" "on your machine. If you plan to use this machine as a server it's a good\n" "idea to review this setup." msgstr "" #: help.pm:855 install_steps_interactive.pm:884 #: install_steps_interactive.pm:979 standalone/drakclock:100 #, c-format msgid "Timezone" msgstr "Часова зона" #: help.pm:855 install_steps_interactive.pm:1053 #, c-format msgid "TV card" msgstr "TV карта" #: help.pm:855 #, c-format msgid "ISDN card" msgstr "ISDN карта" #: help.pm:855 #, c-format msgid "Graphical Interface" msgstr "Графичен интерфейс" #: help.pm:855 install_any.pm:1734 install_steps_interactive.pm:1071 #: standalone/drakbackup:2033 #, c-format msgid "Network" msgstr "Мрежа" #: help.pm:855 install_steps_interactive.pm:1083 #, fuzzy, c-format msgid "Proxies" msgstr "Профил " #: help.pm:855 install_steps_interactive.pm:1094 #, c-format msgid "Security Level" msgstr "Ниво на защита" #: help.pm:855 install_steps_interactive.pm:1108 network/drakfirewall.pm:189 #, c-format msgid "Firewall" msgstr "Защитна стена" #: help.pm:855 install_steps_interactive.pm:1124 #, c-format msgid "Bootloader" msgstr "Bootloader" #: help.pm:855 install_steps_interactive.pm:1137 services.pm:114 #: services.pm:157 services.pm:193 #, c-format msgid "Services" msgstr "Услуги" #: help.pm:858 #, fuzzy, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandriva Linux partition. Be careful, all data on this drive will be lost\n" "and will not be recoverable!" msgstr "" "Изберете твърдия диск, който искате да изтриете, за да\n" "инсталирам новия ви Mandriva Linux дял. Внимание, всички данни на него ще " "бъдат загубени\n" "и няма да могат да се възстановят." #: help.pm:863 #, fuzzy, c-format msgid "" "Click on \"%s\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"%s\" to quit this operation without losing data and partitions\n" "present on this hard drive." msgstr "" "Цъкнете на \"%s\", ако искате да изтриете всички данни и\n" "дялове съществуващи на този твърд диск. Внимание, след цъкане на \"%s\", " "няма да можете да възстановите каквито и да било данни и дялове съществуващи " "на този твърд диск,\n" "включително каквито и да е Windows данни.\n" "\n" "Цъкнете \"%s\", за да отмените тази операция без загуба да данните и\n" "дяловете съществуващи на този твърд диск." #: help.pm:869 #, c-format msgid "Next ->" msgstr "Следващ ->" #: help.pm:869 #, c-format msgid "<- Previous" msgstr "<- Предишен" #: install2.pm:115 #, c-format msgid "" "Can not access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" "Нямам достъп да модулите на ядрото съответстващи на вашият (файл %s липсва), " "това означава, че вашето флопи не е синхронизирано с инсталационният носител " "(моля направете ново boot флопи)" #: install2.pm:169 #, c-format msgid "You must also format %s" msgstr "Вие трябва също да форматирате %s" #: install_any.pm:407 #, fuzzy, c-format msgid "Do you have further supplementary media?" msgstr "Имате ли друг(и) ?" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:410 #, fuzzy, c-format msgid "" "The following media have been found and will be used during install: %s.\n" "\n" "\n" "Do you have a supplementary installation media to configure?" msgstr "Имате ли някакъв %s интерфейс?" #: install_any.pm:423 printer/printerdrake.pm:3301 #: printer/printerdrake.pm:3308 standalone/scannerdrake:182 #: standalone/scannerdrake:190 standalone/scannerdrake:241 #: standalone/scannerdrake:248 #, c-format msgid "CD-ROM" msgstr "CD-ROM" #: install_any.pm:423 #, fuzzy, c-format msgid "Network (HTTP)" msgstr "Мрежа %s" #: install_any.pm:423 #, fuzzy, c-format msgid "Network (FTP)" msgstr "Мрежа %s" #: install_any.pm:423 #, c-format msgid "Network (NFS)" msgstr "" #: install_any.pm:453 #, c-format msgid "Insert the CD 1 again" msgstr "" #: install_any.pm:479 network/netconnect.pm:845 standalone/drakbackup:112 #, c-format msgid "No device found" msgstr "Не беше открито устройство" #: install_any.pm:484 #, c-format msgid "Insert the CD" msgstr "" #: install_any.pm:489 #, fuzzy, c-format msgid "Unable to mount CD-ROM" msgstr "Не мога да направя 'fork': %s" #: install_any.pm:522 install_any.pm:543 #, c-format msgid "URL of the mirror?" msgstr "" #: install_any.pm:527 #, c-format msgid "NFS setup" msgstr "" #: install_any.pm:527 #, c-format msgid "Please enter the hostname and directory of your NFS media" msgstr "" #: install_any.pm:528 #, c-format msgid "Hostname of the NFS mount ?" msgstr "" #: install_any.pm:528 standalone/draknfs:288 #, c-format msgid "Directory" msgstr "Директория" #: install_any.pm:581 #, fuzzy, c-format msgid "" "Can't find a package list file on this mirror. Make sure the location is " "correct." msgstr "Не мога да намеря %s на %s" #: install_any.pm:658 #, c-format msgid "Removing packages prior to upgrade..." msgstr "" #: install_any.pm:700 #, c-format msgid "Looking at packages already installed..." msgstr "Търси във вече инсталираните пакети..." #: install_any.pm:704 #, c-format msgid "Finding packages to upgrade..." msgstr "Търся пакети за обновяване" #: install_any.pm:782 #, c-format msgid "" "Change your Cd-Rom!\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done." msgstr "" "Сменете CD-ROM !\n" "Моля, сложете CD-ROM озаглавен \"%s\" в устройството и натиснете Ok, когато " "сте готови." #: install_any.pm:794 #, fuzzy, c-format msgid "Copying in progress" msgstr "Откриване в прогрес" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:936 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They do not have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "Избрали сте следния(те) сървър(и): %s\n" "\n" "\n" "Тези сървъри се активират по подразбиране. Те нямат известни проблеми със\n" "сигурността, но може да се намерят нови. В този случай, ще трябва да сте\n" "сигурни, че ще надграждате възможно най-бързо.\n" "\n" "\n" "Наистина ли искате да инсталирате тези сървъри ?\n" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:959 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" "Следните пакети ще бъдат изтрити за да се позволи обновяване на системата: %" "s\n" "\n" "\n" "Действително ли искате да изтриете тези пакети?\n" #: install_any.pm:1395 partition_table.pm:597 #, c-format msgid "Error reading file %s" msgstr "Грешка при четенето на файла %s" #: install_any.pm:1629 #, fuzzy, c-format msgid "The following disk(s) were renamed:" msgstr "Следните пакети ще трябва да се инсталират:\n" #: install_any.pm:1631 #, c-format msgid "%s (previously named as %s)" msgstr "" #: install_any.pm:1671 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "Появи се грешка - не са открити валидни устройства, върху които да бъдат " "създадени нови файлови системи. Моля проверете твърдия си диск си за " "причината за този проблем" #: install_any.pm:1715 #, c-format msgid "HTTP" msgstr "HTTP" #: install_any.pm:1715 #, c-format msgid "FTP" msgstr "FTP" #: install_any.pm:1715 #, c-format msgid "NFS" msgstr "NFS" #: install_any.pm:1738 #, fuzzy, c-format msgid "Please choose a media" msgstr "Моля изберете" #: install_any.pm:1754 #, fuzzy, c-format msgid "File already exists. Overwrite it?" msgstr "Файлът съществува. Да бъде ли презаписан?" #: install_any.pm:1758 #, c-format msgid "Permission denied" msgstr "Лисват права" #: install_any.pm:1807 #, c-format msgid "Bad NFS name" msgstr "" #: install_any.pm:1828 #, fuzzy, c-format msgid "Bad media %s" msgstr "добавен източник %s" #: install_any.pm:1878 #, c-format msgid "Can not make screenshots before partitioning" msgstr "Не мога да направя моментна \"снимка\" преди разделянето на диска " #: install_any.pm:1885 #, c-format msgid "Screenshots will be available after install in %s" msgstr "Снимки ще бъдат налични след инсталиране в %s" #: install_gtk.pm:136 #, c-format msgid "System installation" msgstr "Инсталация на система" #: install_gtk.pm:139 #, c-format msgid "System configuration" msgstr "Конфигурация на система" #: install_interactive.pm:22 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "Част от хардуера на компютъра ви се нуждае от ``собствените си'' драйвери, " "за да работи.\n" "Можете да намерите повече информация за това на: %s" #: install_interactive.pm:62 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Трябва да имате root-дял.\n" "Затова създайте дял (или цъкнете на съществуващ).\n" "Тогава изберете действие ``Място на монтиране'' и го сложете `/'" #: install_interactive.pm:67 #, c-format msgid "" "You do not have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "Нямате swap-дял\n" "\n" "Да продължа ли все пак ?" #: install_interactive.pm:70 install_steps.pm:218 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "Трябва да имате FAT дял монтиран в /boot/efi" #: install_interactive.pm:97 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "Няма достатъчно място за създаване на нов дял" #: install_interactive.pm:105 #, c-format msgid "Use existing partitions" msgstr "Изпозване на съществуващ дял" #: install_interactive.pm:107 #, c-format msgid "There is no existing partition to use" msgstr "Няма дял, който мога да използвам" #: install_interactive.pm:114 #, c-format msgid "Use the Windows partition for loopback" msgstr "Използвай за Windows дялът за loopback" #: install_interactive.pm:117 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "Кой дял искате да използвате за Linux4Win ?" #: install_interactive.pm:119 #, c-format msgid "Choose the sizes" msgstr "Изберете големините" #: install_interactive.pm:120 #, c-format msgid "Root partition size in MB: " msgstr "Големина на root-дяла в MB: " #: install_interactive.pm:121 #, c-format msgid "Swap partition size in MB: " msgstr "Големина на swap-дяла в MB: " #: install_interactive.pm:130 #, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "" "Няма FAT дялове за използване като loopback (или няма достатъчно място на " "диска)" #: install_interactive.pm:139 #, c-format msgid "Which partition do you want to resize?" msgstr "Кой дял желаете да промените?" #: install_interactive.pm:153 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occurred: %s" msgstr "" "Не възможност за работа с вашия FAT дял, \n" "поради получената грешка: %s" #: install_interactive.pm:156 #, c-format msgid "Computing the size of the Windows partition" msgstr "Изчислява свободното място на Windows дял" #: install_interactive.pm:163 #, c-format msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandriva Linux " "installation." msgstr "" "Вашият Windows дял е много фрагментиран, моля първо стартирайте ''defrag''" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_interactive.pm:166 #, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this\n" "operation is dangerous. If you have not already done so, you\n" "first need to exit the installation, run \"chkdsk c:\" from a\n" "Command Prompt under Windows (beware, running graphical program\n" "\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" "Command Prompt!), optionally run defrag, then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "ВНИМАНИЕ!\n" "\n" "DrakX трябва да прераздели Вашия Windows дял. Бъдете внимателни: тази " "операция е\n" "опасна. Ако още не сте го направили, трябва първо да пуснете scandisk (и\n" "евентуално да използвате defrag) под Windows върху този дял, тогава \n" "повторете инсталациаята. Би било добре да направите архив на данните си.\n" "Когато сте сигурни, натиснете ОК." #: install_interactive.pm:178 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "Колко искате да оставите за windows?" #: install_interactive.pm:179 #, c-format msgid "partition %s" msgstr "дял %s" #: install_interactive.pm:188 #, c-format msgid "Resizing Windows partition" msgstr "Изчислявам границите на Windows файловата система" #: install_interactive.pm:193 #, c-format msgid "FAT resizing failed: %s" msgstr "Неуспешно преразделяне на FAT: %s" #: install_interactive.pm:208 #, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "Няма FAT дялове за смяна на големината (или няма достаъчно място)" #: install_interactive.pm:213 #, c-format msgid "Remove Windows(TM)" msgstr "Премахни Windows(TM)" #: install_interactive.pm:215 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "имате повече от един твърди дискове, кой да използвам за инсталацията?" #: install_interactive.pm:219 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "ВСИЧКИ съществуващи дялове и данните върху тях на %s ще бъдат загубени" #: install_interactive.pm:232 #, c-format msgid "Use fdisk" msgstr "Използвай fdisk" #: install_interactive.pm:235 #, c-format msgid "" "You can now partition %s.\n" "When you are done, do not forget to save using `w'" msgstr "" "Сега можете да разделите %s.\n" "Когато сте готови, не забравяйте да запишете използвайки `w'" #: install_interactive.pm:271 #, c-format msgid "I can not find any room for installing" msgstr "Не мога да намеря никакво място за инсталация" #: install_interactive.pm:275 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "Помощникът за разделине на дялове на DrakX намери следните решения:" #: install_interactive.pm:281 #, c-format msgid "Partitioning failed: %s" msgstr "Неуспешно разделяне на: %s" #: install_interactive.pm:288 #, c-format msgid "Bringing up the network" msgstr "Включвам мрежата" #: install_interactive.pm:293 #, c-format msgid "Bringing down the network" msgstr "Изключване на мрежата" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:10 #, fuzzy, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandriva " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandriva Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "Mandriva S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "Mandriva S.A. will, in no circumstances and to the extent permitted by law, " "be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if Mandriva S.A. has been advised of the possibility or " "occurrence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, Mandriva S.A. or its distributors will, in " "no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandriva Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to Mandriva.\n" "The programs developed by Mandriva S.A. are governed by the GPL License. " "Documentation written \n" "by Mandriva S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "Mandriva S.A. reserves its rights to modify or adapt the Software Products, " "as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of " "Mandriva S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact Mandriva S.A. \n" msgstr "" "Въведение\n" "\n" "Операционната система и различните компоненти достъпни в Mandriva Linux " "дистрибуцията по-долу ще се\n" "наричат \"Софтуерен Продукти\". Софтуерните Продукти включват, но не се " "ограничават само до, набора\n" "програми, методи, правила и документация отнасяща се до операционната " "система и различните\n" "компоненти на Mandriva Linux дистрибуцията.\n" "\n" "\n" "1. Лицензионен договор\n" "\n" "Моля, прочетете внимателно този документ. Този документ е лицензионен " "договор между вас и\n" "Mandriva S.A., който се отнася до Софтуерния Продукт. Чрез инсталирането, " "копирането\n" "или използването на Софтуерния Продукт по какъвто и да е начин вие изрично " "приемате и\n" "напълно се съгласявате да спазвате сроковете и условията на този Лиценз.\n" "Ако не се съгласявате с някоя част на Лиценза, нямате право да инсталирате, " "копирате или\n" "използвате Софтуерния Продукт. Опитите да се инсталира, копира или използва " "Софтуерния Продукт\n" "несъобразно със сроковете и условията на този Лиценз се забраняват и такива " "прекратяват правата\n" "ви по този Лиценз. При прекратяване на Лиценза, трябва незабавно да " "унижтожите всички\n" "копия на Софтуерния лиценз.\n" "\n" "\n" "2. Ограничена гаранция\n" "\n" "Софтуерните Продукти и приложената документация се предоставят \"такива " "каквито са\", без гаранция,\n" "в рамките на разрешеното от закона.\n" "Mandriva S.A., при никакви обстоятелства и в рамките на закона, не е " "отговорна за каквито да e\n" "умишлени, случайни, преки или косвени щети (включително загуба на данни за " "работа, прекратяване на,\n" "работа, финансови загуби, законни данъци и наказания в резултат на съдебно " "решение или каквато и да е\n" "друга произлизащи от това загуби) произтичащи от употребата или от " "невъзможността да се употреби\n" "Софтуерния Продукт, даже ако Mandriva S.A. да е известила за възможността " "или случването на такава загуба.\n" "\n" "ОГРАНИЧЕНА ОТГОВОРНОСТ СВЪРЗАНА С ПРИТЕЖАВАНЕТО ИЛИ ИЗПОЛЗВАНЕТО НА ЗАБРАНЕН " "СОФТУЕР В НЯКОИ СТРАНИ\n" "\n" "В рамките на закона, Mandriva S.A. и нейните дистрибутори няма при никакви " "условия да бъдат\n" "отговорни за каквито и да било умишлени, случайни, преки или косвени щети " "(включително загуба на данни\n" "за работа, прекратяване на, работа, финансови загуби, законни данъци и " "наказания в резултат на\n" "съдебно решение или каквато и да е друга произлизащи от това загуби) " "произтичащи от притежаването\n" "и употребата на софтуерни компоненти и от изтеглянето на софтуерни " "компоненти от сайтовете на Mandriva Linux,\n" "които са забранени в някои страни от местното законодателство.\n" "Тази ограничена отговорност се отнася до, но не само за, мощните " "криптографски компоненти включени\n" "в Софтуерния Продукт.\n" "\n" "\n" "3. GPL Лиценза и придружаващи лицензи\n" "\n" "Софтуерният Продукт се състои от компоненти създадени от различни хора или " "организации. Повечето от\n" "тези компоненти се управляват от сроковете и условията на GNU Общия Публичен " "Лиценз, оттук нататък наричан\n" "\"GPL\", или подобни нему лицензи. Повечето от тези лицензи ви позволяват да " "използвате, копирате, или\n" "редистрибутирате компонентите, които те покриват. Моля, прочетете внимателно " "сроковете и условията на\n" "лицензионния договор на всеки компонент преди да го използвате. Всякакви " "въпроси относно лиценза\n" "на компонентите би трябвало да бъдат насочени към съответния им автор, а не " "към Mandriva.\n" "Програмите разработени от Mandriva S.A. се управляват от GPL Лиценза. " "Документацията написана\n" "от Mandriva S.A. се управлява от специален лиценз. Моля, погледнете " "документацията за\n" "повече информация.\n" "\n" "\n" "4. Права за Интелектуална Собственост\n" "\n" "Всички права към компонентите на Софтуерния Продукт принадлежат на " "съответните им автори и са\n" "защитени от законите за интелектуалната собственост и за копиране прилагани " "за софтуерните програми.\n" "Mandriva S.A. запазва правото си да модифицира и пригодява Софтуерния " "Продукт, като цяло или на\n" "части, по всякакъв начин и с всякакви цели.\n" "\"Mandriva\", \"Mandriva Linux\" и свързаните логота са запазена марка на " "Mandriva S.A.\n" "\n" "\n" "5. Управляващи Закони\n" "\n" "Ако някоя част от този договор се води забранена, нелегална или неприложима " "според решение на съд,\n" "тази част се изключва от договора. Вие оставате ограничени от останалите " "приложими секции на договора.\n" "Сроковете и условията на този Лиценз се управляват от Законите на Франция.\n" "Всички спорове по условията на този лиценз би било добре да се отнесат до " "съда. Като крайна мярка,\n" "споровете ще бъдат отнасяни до подходящия правни съдилища на Париж - " "Франция.\n" "За всякакви въпроси по този документ, моля, свържете се с Mandriva S.A.\n" "\n" "ЗАБЕЛЕЖКА: Това е български приблизителен превод на документа, което " "означава, че той\n" "вероятно не е достатъчно точен. Като по-достоверен източник ползвайте " "неговия оригинал на\n" "английски.\n" #: install_messages.pm:90 #, c-format msgid "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, " "the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a " "patent\n" "may be applicable to you, check your local laws." msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:98 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" "\n" "Внимание\n" "\n" "Моля, прочетете условията по-долу. Ако не сте съгласни с някое от тях,\n" "не можете да продължите инсталацията на следващия CD носител. Натиснете\n" "'Откажи', за да продължите инсталацията без тези носители.\n" "\n" "\n" "Някои компоненти съдържащи се в следващия CD носител не са разпространяват\n" "под GPL Лиценза или подобен такъв. Всеки такъв компонент е под условията\n" "и положенията на специфичния му лиценз. Моля, прочетете внимателно и изцяло\n" "тези специфични лицензи преди да използвате или разпространявате " "споменатите\n" "компоненти.\n" "Такива лицензи по принцип предотвратява преноса, копирането (освен с цел\n" "съхранение), разпространяването, обратния инженеринг, деасемблирането\n" "декомпилацията или модификацията на компонентите.\n" "Всяко нарушаване на спогодбата незабавно преустановява правата ви по\n" "специфичния лиценз. Освен ако специфичния лиценз ви дава такива права,\n" "обикновено не можете да инсталирате програмите на повече от една система\n" "или да ги пригаждате за използване в мрежа. Ако не сте сигурни, моля\n" "свържете се с дистрибуция или редактора на компонена.\n" "Прехвърлянето на трети лица или копирането на всяка компонента, включително\n" "на документацията, обикновено са забранени.\n" "\n" "\n" "Всички права на компонентите от следващия CD носител принадлежат на\n" "съответните им автори и са защитени като интелектуална собственост от\n" "законите за авторски права приложими за софтуерните програми.\n" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:131 #, fuzzy, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandriva " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandriva Linux User's Guide." msgstr "" "Поздравления, инсталацията е преключена.\n" "Премахнете стартовото устройство и натисене Enter за да рестартирайте.\n" "\n" "\n" "За информация относно поправки, на тази версия на Mandriva Linux,\n" "се консултирайте с Errata, на адрес : \n" "\n" "\n" "%s\n" "\n" "\n" "Информация за настройване на системата ви можете да намерите в\n" "слединсталационната глава от Official Mandriva Linux User's Guide." #: install_steps.pm:253 #, c-format msgid "Duplicate mount point %s" msgstr "Дублирай точката на монтиране %s" #: install_steps.pm:481 #, c-format msgid "" "Some important packages did not get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm" "\"\n" msgstr "" "Някои важни пакети не се инсталираха както трябва.\n" "Или CDROM устройството ви или компакт диска ви е дефектен.\n" "Проверете компакт диска на инсталирания компютър използвайки \"rpm -qpl " "media/main/*.rpm\"\n" #: install_steps_auto_install.pm:75 install_steps_stdio.pm:27 #, c-format msgid "Entering step `%s'\n" msgstr "Навлизам в етап `%s'\n" #: install_steps_gtk.pm:181 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandriva Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "Вашата система е с малки ресурси. Може да имате проблеми с инсталирането\n" "на Mandriva Linux. Ако се появи проблем опитайте с текстовата инсалация. " "Зацелта,\n" "натиснете 'F1', когато стартирате от CDROM и въведете 'теьт'." #: install_steps_gtk.pm:211 install_steps_interactive.pm:628 #, c-format msgid "Package Group Selection" msgstr "Избор на група пакети" #: install_steps_gtk.pm:254 install_steps_interactive.pm:571 #, c-format msgid "Total size: %d / %d MB" msgstr "Обща големина: %d / %d MB" #: install_steps_gtk.pm:299 #, c-format msgid "Bad package" msgstr "Лош пакет" #: install_steps_gtk.pm:301 #, c-format msgid "Version: " msgstr "Версия: " #: install_steps_gtk.pm:302 #, c-format msgid "Size: " msgstr "Размер: " #: install_steps_gtk.pm:302 #, c-format msgid "%d KB\n" msgstr "%d КБ\n" #: install_steps_gtk.pm:303 #, c-format msgid "Importance: " msgstr "Важност:" #: install_steps_gtk.pm:336 #, c-format msgid "You can not select/unselect this package" msgstr "Не можете да отбележете/деотбележете този пакет" #: install_steps_gtk.pm:340 network/thirdparty.pm:329 #, fuzzy, c-format msgid "due to missing %s" msgstr "липсва kdesu" #: install_steps_gtk.pm:341 #, c-format msgid "due to unsatisfied %s" msgstr "поради неопределен %s" #: install_steps_gtk.pm:342 #, c-format msgid "trying to promote %s" msgstr "" #: install_steps_gtk.pm:343 #, c-format msgid "in order to keep %s" msgstr "" #: install_steps_gtk.pm:348 #, c-format msgid "" "You can not select this package as there is not enough space left to install " "it" msgstr "" "Не можете да оставите пакета немаркиран, защото нямате място да го " "инсталирате" #: install_steps_gtk.pm:351 #, c-format msgid "The following packages are going to be installed" msgstr "Следните пакети ще бъдат инсталирани" #: install_steps_gtk.pm:352 #, c-format msgid "The following packages are going to be removed" msgstr "Следните пакети ще бъдат премахнати" #: install_steps_gtk.pm:376 #, c-format msgid "This is a mandatory package, it can not be unselected" msgstr "Това е нужен пакет, не може да бъде немаркиран" #: install_steps_gtk.pm:378 #, c-format msgid "You can not unselect this package. It is already installed" msgstr "Не можете да оставите този пакет немаркиран. Той вече е инсталиран" #: install_steps_gtk.pm:381 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "Този пакет трябва да бъде обновен\n" "Сигурни ли сте, че искате да го изключите ?" #: install_steps_gtk.pm:384 #, c-format msgid "You can not unselect this package. It must be upgraded" msgstr "Не можете да изключите този пакет. Той трябва да бъде обновен" #: install_steps_gtk.pm:389 #, c-format msgid "Show automatically selected packages" msgstr "Покажи автоматично отбелязаните пакети" #: install_steps_gtk.pm:394 #, fuzzy, c-format msgid "Load/Save selection" msgstr "Избор на пакети" #: install_steps_gtk.pm:395 #, c-format msgid "Updating package selection" msgstr "Обновяване на избора на пакети" #: install_steps_gtk.pm:400 #, c-format msgid "Minimal install" msgstr "Миминална инсталация" #: install_steps_gtk.pm:414 install_steps_interactive.pm:490 #, c-format msgid "Choose the packages you want to install" msgstr "Изберете пакетите, които искате да инсталирате" #: install_steps_gtk.pm:431 install_steps_interactive.pm:714 #, c-format msgid "Installing" msgstr "Инсталирам" #: install_steps_gtk.pm:457 #, c-format msgid "No details" msgstr "Без подробности" #: install_steps_gtk.pm:472 #, c-format msgid "Time remaining " msgstr "Оставащо време " #: install_steps_gtk.pm:473 #, c-format msgid "Estimating" msgstr "Пресмятане" #: install_steps_gtk.pm:500 #, c-format msgid "%d packages" msgstr "%d пакета" #: install_steps_gtk.pm:539 install_steps_interactive.pm:92 #: install_steps_interactive.pm:738 #, c-format msgid "Refuse" msgstr "Откажи" #: install_steps_gtk.pm:543 install_steps_interactive.pm:742 #, fuzzy, c-format msgid "" "Change your Cd-Rom!\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you do not have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "Сменете CD-ROM !\n" "\n" "Моля, сложете CD-ROM озаглавен \"%s\" в устройството и натиснете Ok, когато " "сте готови.\n" "Ако го нямате, натиснете Отмяна, за да избегнете инсталирането от този CD-" "ROM." #: install_steps_gtk.pm:556 install_steps_interactive.pm:753 #, c-format msgid "There was an error ordering packages:" msgstr "Появи се грешка при поръчването на пакетите:" #: install_steps_gtk.pm:558 install_steps_interactive.pm:757 #, c-format msgid "There was an error installing packages:" msgstr "Появи се грешка при инсталиране на пакетите:" #: install_steps_gtk.pm:560 install_steps_interactive.pm:753 #: install_steps_interactive.pm:757 #, c-format msgid "Go on anyway?" msgstr "Да продължа ли все пак ?" #: install_steps_gtk.pm:582 install_steps_interactive.pm:939 steps.pm:30 #, c-format msgid "Summary" msgstr "Обобщение" #: install_steps_gtk.pm:605 install_steps_interactive.pm:935 #: install_steps_interactive.pm:1084 #, c-format msgid "not configured" msgstr "не е конфигуриран" #: install_steps_gtk.pm:668 #, c-format msgid "" "The following installation media have been found.\n" "If you want to skip some of them, you can unselect them now." msgstr "" #: install_steps_gtk.pm:677 #, c-format msgid "" "You have the option to copy the contents of the CDs onto the hard drive " "before installation.\n" "It will then continue from the hard drive and the packages will remain " "available once the system is fully installed." msgstr "" #: install_steps_gtk.pm:679 #, c-format msgid "Copy whole CDs" msgstr "" #: install_steps_interactive.pm:84 #, c-format msgid "License agreement" msgstr "Лицензионен договор" #: install_steps_interactive.pm:89 #, fuzzy, c-format msgid "Release Notes" msgstr "Версия:" #: install_steps_interactive.pm:120 #, c-format msgid "Please choose your keyboard layout." msgstr "Моля, изберете подреждане на клавиатурата." #: install_steps_interactive.pm:122 #, fuzzy, c-format msgid "Here is the full list of available keyboards" msgstr "Ето пълен списък на достръпните страни" #: install_steps_interactive.pm:152 #, c-format msgid "Install/Upgrade" msgstr "Инсталирай/Обнови" #: install_steps_interactive.pm:153 #, c-format msgid "Is this an install or an upgrade?" msgstr "Това нова инсталация ли е или обновяване ?" #: install_steps_interactive.pm:159 #, c-format msgid "Upgrade %s" msgstr "Обновява %s" #: install_steps_interactive.pm:172 #, c-format msgid "Encryption key for %s" msgstr "Ключ за криптиране на %s" #: install_steps_interactive.pm:195 #, c-format msgid "Please choose your type of mouse." msgstr "Моля, изберете тип на мишката." #: install_steps_interactive.pm:196 #, c-format msgid "Mouse choice" msgstr "" #: install_steps_interactive.pm:205 standalone/mousedrake:46 #, c-format msgid "Mouse Port" msgstr "Порт на мишката" #: install_steps_interactive.pm:206 standalone/mousedrake:47 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "Моля, изберете към кой сериен порт е свързана мишката ви." #: install_steps_interactive.pm:216 #, c-format msgid "Buttons emulation" msgstr "Имитация на бутони" #: install_steps_interactive.pm:218 #, c-format msgid "Button 2 Emulation" msgstr "Имитация на 2 бутона" #: install_steps_interactive.pm:219 #, c-format msgid "Button 3 Emulation" msgstr "Имитация на 3 бутона" #: install_steps_interactive.pm:240 #, c-format msgid "PCMCIA" msgstr "PCMCIA" #: install_steps_interactive.pm:240 #, c-format msgid "Configuring PCMCIA cards..." msgstr "Настройка на PCMCIA картите ..." #: install_steps_interactive.pm:247 #, c-format msgid "IDE" msgstr "IDE" #: install_steps_interactive.pm:247 #, c-format msgid "Configuring IDE" msgstr "Настройка на IDE" #: install_steps_interactive.pm:267 #, c-format msgid "No partition available" msgstr "няма дялове на разположение" #: install_steps_interactive.pm:270 #, c-format msgid "Scanning partitions to find mount points" msgstr "Претърсване на дяловете за намиране на точки на монтиране" #: install_steps_interactive.pm:277 #, c-format msgid "Choose the mount points" msgstr "Изберете места за монтиране" #: install_steps_interactive.pm:323 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" "Няма свободно място за 1 МБ стартиращо поле ! Инсталацията ще продължи, но, " "за да стартирате системата си, ще трябва да създадете стартиращо поле в " "DiskDrake" #: install_steps_interactive.pm:328 #, fuzzy, c-format msgid "" "You'll need to create a PPC PReP Boot bootstrap! Install will continue, but " "to boot your system, you'll need to create the bootstrap partition in " "DiskDrake" msgstr "" "Няма свободно място за 1 МБ стартиращо поле ! Инсталацията ще продължи, но, " "за да стартирате системата си, ще трябва да създадете стартиращо поле в " "DiskDrake" #: install_steps_interactive.pm:364 #, c-format msgid "Choose the partitions you want to format" msgstr "Изберете дяловете, които искате да форматирате" #: install_steps_interactive.pm:366 #, c-format msgid "Check bad blocks?" msgstr "Проверка за лоши сектори ?" #: install_steps_interactive.pm:394 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can lose data)" msgstr "" "Неуспешна проверка на файлва система %s. Искате ли да оправите грешките? " "(бъдете внимателни, може да загубите данни)" #: install_steps_interactive.pm:397 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "" "Няма достатъчно swap за приключване на инсталацията, моля добавете малко" #: install_steps_interactive.pm:406 #, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "Търся налични пакети и препостроявам rpm базата данни..." #: install_steps_interactive.pm:407 install_steps_interactive.pm:459 #, c-format msgid "Looking for available packages..." msgstr "Търся налични пакети..." #: install_steps_interactive.pm:428 install_steps_interactive.pm:839 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "Изберете огледален сървър,от който да получите пакетите" #: install_steps_interactive.pm:468 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" "Системата ви няма достатъчно място за инсталация или обновяване (%d > %d)" #: install_steps_interactive.pm:502 #, fuzzy, c-format msgid "" "Please choose load or save package selection.\n" "The format is the same as auto_install generated files." msgstr "" "Може изберете зареждане или запис на избора на пакети на флопи.\n" "Форматът е същият като auto_install генерираните дискети." #: install_steps_interactive.pm:504 #, c-format msgid "Load" msgstr "Натовареност" #: install_steps_interactive.pm:504 standalone/drakbackup:3930 #: standalone/drakbackup:4003 standalone/logdrake:175 #, c-format msgid "Save" msgstr "Запазва" #: install_steps_interactive.pm:512 #, fuzzy, c-format msgid "Bad file" msgstr "Зареждане на файл" #: install_steps_interactive.pm:585 #, c-format msgid "Selected size is larger than available space" msgstr "Избраната големина е по-голяма от достъпното пространство" #: install_steps_interactive.pm:600 #, c-format msgid "Type of install" msgstr "Тип инсталация" #: install_steps_interactive.pm:601 #, c-format msgid "" "You have not selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" "Вие не сте избрали никаква група от пакети.\n" "Моля, изберете минималната инсталация кояти искате:" #: install_steps_interactive.pm:605 #, c-format msgid "With basic documentation (recommended!)" msgstr "С базова документация (препоръчва се!)" #: install_steps_interactive.pm:606 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "Наистина минимална инсталация (особенно без urpmi)" #: install_steps_interactive.pm:645 standalone/drakxtv:52 #, c-format msgid "All" msgstr "Всички" #: install_steps_interactive.pm:684 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "Ако имате всички CD-та от списъка по-горе, натиснете Ok.\n" "Ако нямате нито едно от тези CD-та, натиснете Отмяна.\n" "Ако ви липсват някои CD-та, махнете ги, и натиснете Ok. " #: install_steps_interactive.pm:689 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "CD-ROM озаглавен \"%s\"" #: install_steps_interactive.pm:714 #, c-format msgid "Preparing installation" msgstr "Подготвям инсталацията" #: install_steps_interactive.pm:722 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "Инсталирам пакет %s\n" "%d%%" #: install_steps_interactive.pm:771 #, c-format msgid "Post-install configuration" msgstr "След инсталационна настройка" #: install_steps_interactive.pm:778 #, c-format msgid "Please ensure the Update Modules media is in drive %s" msgstr "" #: install_steps_interactive.pm:812 #, c-format msgid "Updates" msgstr "Обновяване" #: install_steps_interactive.pm:813 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates?" msgstr "" #: install_steps_interactive.pm:834 #, c-format msgid "" "Contacting Mandriva Linux web site to get the list of available mirrors..." msgstr "" "Свързване с Mandriva Linux web сайт за получаване на списъка с налични " "огледални сървъри..." #: install_steps_interactive.pm:853 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "Свързване с огледалния сървър за получаване на списъка с пакетите" #: install_steps_interactive.pm:857 #, c-format msgid "Unable to contact mirror %s" msgstr "Не мога да се свръжа с огледален сървър' %s" #: install_steps_interactive.pm:857 #, c-format msgid "Would you like to try again?" msgstr "Желаете ли да опитате пак ?" #: install_steps_interactive.pm:884 standalone/drakclock:45 #, c-format msgid "Which is your timezone?" msgstr "Коя е времевата ви зона ?" #: install_steps_interactive.pm:889 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "Автоматична синхронизация на времето (използва NTP)" #: install_steps_interactive.pm:897 #, c-format msgid "NTP Server" msgstr "NTP сървър" #: install_steps_interactive.pm:952 install_steps_interactive.pm:960 #: install_steps_interactive.pm:978 install_steps_interactive.pm:985 #: install_steps_interactive.pm:1136 services.pm:133 #: standalone/drakbackup:1574 #, c-format msgid "System" msgstr "Система" #: install_steps_interactive.pm:992 install_steps_interactive.pm:1019 #: install_steps_interactive.pm:1036 install_steps_interactive.pm:1052 #: install_steps_interactive.pm:1063 #, c-format msgid "Hardware" msgstr "Хардуер" #: install_steps_interactive.pm:998 install_steps_interactive.pm:1007 #, c-format msgid "Remote CUPS server" msgstr "Отдалечен CUPS сървър" #: install_steps_interactive.pm:998 #, c-format msgid "No printer" msgstr "Няма принтер" #: install_steps_interactive.pm:1040 #, c-format msgid "Do you have an ISA sound card?" msgstr "Имате ли ISA звукова карта?" #: install_steps_interactive.pm:1042 #, fuzzy, c-format msgid "" "Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound " "card" msgstr "" "Изпълнете \"sndconfig\" след инсталация за да конфигурирате вашата звукова " "карта" #: install_steps_interactive.pm:1044 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "Няма открита звукова карта. Опитайте \"harddrake\" след инсталацията" #: install_steps_interactive.pm:1064 #, c-format msgid "Graphical interface" msgstr "Графичен интерфайс" #: install_steps_interactive.pm:1070 install_steps_interactive.pm:1082 #, c-format msgid "Network & Internet" msgstr "Мрежа и интернет" #: install_steps_interactive.pm:1084 #, fuzzy, c-format msgid "configured" msgstr "пренастройка" #: install_steps_interactive.pm:1093 install_steps_interactive.pm:1107 #: security/level.pm:55 steps.pm:20 #, c-format msgid "Security" msgstr "Сигурност" #: install_steps_interactive.pm:1112 #, c-format msgid "activated" msgstr "активирано" #: install_steps_interactive.pm:1112 #, c-format msgid "disabled" msgstr "изключен" #: install_steps_interactive.pm:1123 #, c-format msgid "Boot" msgstr "Зареждане" #. -PO: example: lilo-graphic on /dev/hda1 #: install_steps_interactive.pm:1127 printer/printerdrake.pm:974 #, c-format msgid "%s on %s" msgstr "%s на %s" #: install_steps_interactive.pm:1141 services.pm:175 #, c-format msgid "Services: %d activated for %d registered" msgstr "Услуги: %d активирани от %d регистрирани" #: install_steps_interactive.pm:1153 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "Вие не сте конфигурирали X. Сигурни ли сте, че искате това?" #: install_steps_interactive.pm:1234 #, c-format msgid "Preparing bootloader..." msgstr "Подготовка на bootloader" #: install_steps_interactive.pm:1244 #, fuzzy, c-format msgid "" "You appear to have an OldWorld or Unknown machine, the yaboot bootloader " "will not work for you. The install will continue, but you'll need to use " "BootX or some other means to boot your machine. The kernel argument for the " "root fs is: root=%s" msgstr "" "Изглежда имате старовремска или неизвестна\n" "машина, на която yaboot няма да проработи.\n" "Инсталацията ще продължи, но ще трябва\n" "да иползвате BootX, за да стартирате машината си" #: install_steps_interactive.pm:1250 #, c-format msgid "Do you want to use aboot?" msgstr "Искате ли да използвате aboot ?" #: install_steps_interactive.pm:1253 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "Грешка при инсталиране на aboot, \n" "да се опитам ли да продължа инсталацията дори, ако това унижтожи първия дял ?" #: install_steps_interactive.pm:1270 #, c-format msgid "" "In this security level, access to the files in the Windows partition is " "restricted to the administrator." msgstr "" #: install_steps_interactive.pm:1299 standalone/drakautoinst:76 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "Сложете празна дискета в устройство %s" #: install_steps_interactive.pm:1304 #, fuzzy, c-format msgid "Please insert another floppy for drivers disk" msgstr "Сложете стартиращата дискета в устройство %s" #: install_steps_interactive.pm:1306 #, c-format msgid "Creating auto install floppy..." msgstr "Подготвям дискета с автоматична инсталация" #: install_steps_interactive.pm:1318 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "Някои етапи не са завършени.\n" "\n" "Наистина ли искате да излезете сега ?" #: install_steps_interactive.pm:1328 standalone/draksambashare:416 #: standalone/draksambashare:523 standalone/drakups:120 standalone/drakups:159 #: standalone/logdrake:452 standalone/logdrake:458 #, c-format msgid "Congratulations" msgstr "Поздравления" #: install_steps_interactive.pm:1336 install_steps_interactive.pm:1337 #, c-format msgid "Generate auto install floppy" msgstr "Подготви дискета за автоматична инсталация" #: install_steps_interactive.pm:1338 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "Автоматичната инсталация може да бъде напълно автоматизирана,\n" "в такъв случай ще превземе твърдия ви диск !!!\n" "(това е за предназначено за инсталиране на друга машина).\n" "\n" "Може би искате да повторите инсталацията.\n" #: install_steps_newt.pm:20 #, c-format msgid "Mandriva Linux Installation %s" msgstr "Инсталация на Mandriva Linux %s" #. -PO: This string must fit in a 80-char wide text screen #: install_steps_newt.pm:34 #, c-format msgid "" " / between elements | selects | next screen " msgstr "" " / между елементите | избира | следващ екран" #: interactive.pm:196 #, c-format msgid "Choose a file" msgstr "Изберете файл" #: interactive.pm:321 interactive/gtk.pm:508 standalone/drakbackup:1515 #: standalone/drakfont:655 standalone/drakhosts:242 standalone/draknfs:605 #: standalone/draksambashare:1123 standalone/drakups:301 #: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:319 #: standalone/drakvpn:680 #, c-format msgid "Add" msgstr "Добавя" #: interactive.pm:321 interactive/gtk.pm:508 standalone/drakhosts:249 #: standalone/draknfs:612 standalone/draksambashare:1080 #: standalone/draksambashare:1133 standalone/draksambashare:1172 #, c-format msgid "Modify" msgstr "Модифицира" #: interactive.pm:321 interactive/gtk.pm:508 standalone/drakhosts:256 #: standalone/draknfs:619 standalone/draksambashare:1081 #: standalone/draksambashare:1141 standalone/draksambashare:1180 #: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383 #: standalone/drakvpn:319 standalone/drakvpn:680 #, c-format msgid "Remove" msgstr "Премахва" #: interactive.pm:398 #, c-format msgid "Basic" msgstr "Базов" #: interactive.pm:436 interactive/newt.pm:321 ugtk2.pm:490 #, c-format msgid "Finish" msgstr "Завърши" #: interactive/newt.pm:92 #, c-format msgid "Do" msgstr "Направи" #: interactive/stdio.pm:29 interactive/stdio.pm:148 #, c-format msgid "Bad choice, try again\n" msgstr "Лош избор, опитайте отново\n" #: interactive/stdio.pm:30 interactive/stdio.pm:149 #, c-format msgid "Your choice? (default %s) " msgstr "Вашият избор ? (по подразбиране е %s)" #: interactive/stdio.pm:54 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" "Записите които вие ще трябва да запълните:\n" "%s" #: interactive/stdio.pm:70 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "Вашият избор ? (по подразбиране е `%s')" #: interactive/stdio.pm:94 #, c-format msgid "Button `%s': %s" msgstr "Бутон `%s': %s" #: interactive/stdio.pm:95 #, c-format msgid "Do you want to click on this button?" msgstr "Искате ли да цъкнете на този бутон?" #: interactive/stdio.pm:104 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "Вашият избор ? (по подразбиране е `%s'%s) " #: interactive/stdio.pm:104 #, c-format msgid " enter `void' for void entry" msgstr "" #: interactive/stdio.pm:122 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "=> Има много неща за избор от (%s).\n" #: interactive/stdio.pm:125 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" #: interactive/stdio.pm:138 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" "=> забележка, променен етикет:\n" "%s" #: interactive/stdio.pm:145 #, c-format msgid "Re-submit" msgstr "" #: keyboard.pm:171 keyboard.pm:205 #, c-format msgid "" "_: keyboard\n" "Czech (QWERTZ)" msgstr "Чешка (QWERTZ)" #: keyboard.pm:172 keyboard.pm:207 #, c-format msgid "" "_: keyboard\n" "German" msgstr "Немска" #: keyboard.pm:173 #, c-format msgid "" "_: keyboard\n" "Dvorak" msgstr "Дворак" #: keyboard.pm:174 keyboard.pm:224 #, c-format msgid "" "_: keyboard\n" "Spanish" msgstr "Испанска" #: keyboard.pm:175 keyboard.pm:225 #, c-format msgid "" "_: keyboard\n" "Finnish" msgstr "Финландска" #: keyboard.pm:176 keyboard.pm:228 #, c-format msgid "" "_: keyboard\n" "French" msgstr "Френска" #: keyboard.pm:177 keyboard.pm:272 #, c-format msgid "" "_: keyboard\n" "Norwegian" msgstr "Норвежка" #: keyboard.pm:178 #, c-format msgid "" "_: keyboard\n" "Polish" msgstr "Полска" #: keyboard.pm:179 keyboard.pm:284 #, c-format msgid "" "_: keyboard\n" "Russian" msgstr "Руска" #: keyboard.pm:181 keyboard.pm:290 #, c-format msgid "" "_: keyboard\n" "Swedish" msgstr "Шведска" #: keyboard.pm:182 keyboard.pm:320 #, c-format msgid "UK keyboard" msgstr "UK клавиатура" #: keyboard.pm:183 keyboard.pm:323 #, c-format msgid "US keyboard" msgstr "US клавиатура" #: keyboard.pm:185 #, c-format msgid "" "_: keyboard\n" "Albanian" msgstr "Албанска" #: keyboard.pm:186 #, c-format msgid "" "_: keyboard\n" "Armenian (old)" msgstr "Арменска (стара)" #: keyboard.pm:187 #, c-format msgid "" "_: keyboard\n" "Armenian (typewriter)" msgstr "Арменска (пишеща машина)" #: keyboard.pm:188 #, c-format msgid "" "_: keyboard\n" "Armenian (phonetic)" msgstr "Арменска (фонетичен)" #: keyboard.pm:189 #, c-format msgid "" "_: keyboard\n" "Arabic" msgstr "Арабски" #: keyboard.pm:190 #, c-format msgid "" "_: keyboard\n" "Azerbaidjani (latin)" msgstr "Азербайджанска (латиница)" #: keyboard.pm:191 #, c-format msgid "" "_: keyboard\n" "Belgian" msgstr "Белгийска" #: keyboard.pm:192 #, c-format msgid "" "_: keyboard\n" "Bengali (Inscript-layout)" msgstr "Бенгалска (Inscript-подредба)" #: keyboard.pm:193 #, c-format msgid "" "_: keyboard\n" "Bengali (Probhat)" msgstr "Бенгалска (Probhat-подредба)" #: keyboard.pm:194 #, c-format msgid "" "_: keyboard\n" "Bulgarian (phonetic)" msgstr "Българска (фонетичен)" #: keyboard.pm:195 #, c-format msgid "" "_: keyboard\n" "Bulgarian (BDS)" msgstr "Българска (BDS)" #: keyboard.pm:196 #, c-format msgid "" "_: keyboard\n" "Brazilian (ABNT-2)" msgstr "Бразилска (ABNT-2)" #: keyboard.pm:197 #, c-format msgid "" "_: keyboard\n" "Bosnian" msgstr "Босненска" #: keyboard.pm:198 #, c-format msgid "" "_: keyboard\n" "Belarusian" msgstr "Беларуска" #: keyboard.pm:200 #, c-format msgid "" "_: keyboard\n" "Swiss (German layout)" msgstr "Швейцарска (немска наредба)" #: keyboard.pm:202 #, c-format msgid "" "_: keyboard\n" "Swiss (French layout)" msgstr "Швейцарска (френски наредба)" #: keyboard.pm:204 #, fuzzy, c-format msgid "" "_: keyboard\n" "Cherokee syllabics" msgstr "Арабски" #: keyboard.pm:206 #, c-format msgid "" "_: keyboard\n" "Czech (QWERTY)" msgstr "Чешка (QWERTY)" #: keyboard.pm:208 #, c-format msgid "" "_: keyboard\n" "German (no dead keys)" msgstr "Немска (без неработещи клавиши)" #: keyboard.pm:209 #, c-format msgid "" "_: keyboard\n" "Devanagari" msgstr "Давенаджари" #: keyboard.pm:210 #, c-format msgid "" "_: keyboard\n" "Danish" msgstr "Датска" #: keyboard.pm:211 #, c-format msgid "" "_: keyboard\n" "Dvorak (US)" msgstr "Дворак (US)" #: keyboard.pm:215 #, fuzzy, c-format msgid "" "_: keyboard\n" "Dvorak (French)" msgstr "Дворак (Норвежка)" #: keyboard.pm:217 #, fuzzy, c-format msgid "" "_: keyboard\n" "Dvorak (UK)" msgstr "Дворак (US)" #: keyboard.pm:218 #, c-format msgid "" "_: keyboard\n" "Dvorak (Norwegian)" msgstr "Дворак (Норвежка)" #: keyboard.pm:220 #, fuzzy, c-format msgid "" "_: keyboard\n" "Dvorak (Polish)" msgstr "Дворак (Шведска)" #: keyboard.pm:221 #, c-format msgid "" "_: keyboard\n" "Dvorak (Swedish)" msgstr "Дворак (Шведска)" #: keyboard.pm:222 #, fuzzy, c-format msgid "" "_: keyboard\n" "Dzongkha/Tibetan" msgstr "Босненска" #: keyboard.pm:223 #, c-format msgid "" "_: keyboard\n" "Estonian" msgstr "Естонска" #: keyboard.pm:227 #, fuzzy, c-format msgid "" "_: keyboard\n" "Faroese" msgstr "Гръцка" #: keyboard.pm:229 #, c-format msgid "" "_: keyboard\n" "Georgian (\"Russian\" layout)" msgstr "Грузинска (\"Руска\" наредба)" #: keyboard.pm:230 #, c-format msgid "" "_: keyboard\n" "Georgian (\"Latin\" layout)" msgstr "Грузинска (\"Латинска\" наредба)" #: keyboard.pm:231 #, c-format msgid "" "_: keyboard\n" "Greek" msgstr "Гръцка" #: keyboard.pm:232 #, c-format msgid "" "_: keyboard\n" "Greek (polytonic)" msgstr "" #: keyboard.pm:233 #, c-format msgid "" "_: keyboard\n" "Gujarati" msgstr "Гуаджарати" #: keyboard.pm:234 #, c-format msgid "" "_: keyboard\n" "Gurmukhi" msgstr "Гурмукчи" #: keyboard.pm:235 #, c-format msgid "" "_: keyboard\n" "Croatian" msgstr "Хърватска" #: keyboard.pm:236 #, c-format msgid "" "_: keyboard\n" "Hungarian" msgstr "Унгарска" #: keyboard.pm:237 #, c-format msgid "" "_: keyboard\n" "Irish" msgstr "" #: keyboard.pm:238 #, c-format msgid "" "_: keyboard\n" "Israeli" msgstr "Израелска" #: keyboard.pm:239 #, c-format msgid "" "_: keyboard\n" "Israeli (phonetic)" msgstr "Израелска (фонетична)" #: keyboard.pm:240 #, c-format msgid "" "_: keyboard\n" "Iranian" msgstr "Иранска" #: keyboard.pm:241 #, c-format msgid "" "_: keyboard\n" "Icelandic" msgstr "Исландска" #: keyboard.pm:242 #, c-format msgid "" "_: keyboard\n" "Italian" msgstr "Италианска" #: keyboard.pm:243 #, c-format msgid "" "_: keyboard\n" "Inuktitut" msgstr "Инуктитут" #: keyboard.pm:248 #, c-format msgid "" "_: keyboard\n" "Japanese 106 keys" msgstr "Японска 106 клавиша" #: keyboard.pm:249 #, c-format msgid "" "_: keyboard\n" "Kannada" msgstr "Канада" #: keyboard.pm:252 #, c-format msgid "" "_: keyboard\n" "Korean" msgstr "Корейска клавиатура" #: keyboard.pm:254 #, fuzzy, c-format msgid "" "_: keyboard\n" "Kurdish (arabic script)" msgstr "Арабски" #: keyboard.pm:255 #, fuzzy, c-format msgid "" "_: keyboard\n" "Kyrgyz" msgstr "UK клавиатура" #: keyboard.pm:256 #, c-format msgid "" "_: keyboard\n" "Latin American" msgstr "Латиноамериканска" #: keyboard.pm:258 #, c-format msgid "" "_: keyboard\n" "Laotian" msgstr "Лаоска" #: keyboard.pm:261 #, c-format msgid "" "_: keyboard\n" "Lithuanian AZERTY (new)" msgstr "Литвийска AZERTY (нова)" #: keyboard.pm:262 #, c-format msgid "" "_: keyboard\n" "Lithuanian \"number row\" QWERTY" msgstr "Литвийска \"числова редица\" QWERTY" #: keyboard.pm:264 #, c-format msgid "" "_: keyboard\n" "Latvian" msgstr "Латвийска" #: keyboard.pm:265 #, c-format msgid "" "_: keyboard\n" "Malayalam" msgstr "Малайлам" #: keyboard.pm:266 #, c-format msgid "" "_: keyboard\n" "Macedonian" msgstr "Македонска" #: keyboard.pm:267 #, c-format msgid "" "_: keyboard\n" "Myanmar (Burmese)" msgstr "Майнмар (бирманска)" #: keyboard.pm:268 #, c-format msgid "" "_: keyboard\n" "Mongolian (cyrillic)" msgstr "Монголска (кирилица)" #: keyboard.pm:269 #, c-format msgid "" "_: keyboard\n" "Maltese (UK)" msgstr "Малтийска (UK)" #: keyboard.pm:270 #, c-format msgid "" "_: keyboard\n" "Maltese (US)" msgstr "Малтийска (US)" #: keyboard.pm:271 #, c-format msgid "" "_: keyboard\n" "Dutch" msgstr "Холандска" #: keyboard.pm:273 #, c-format msgid "" "_: keyboard\n" "Oriya" msgstr "Орийска" #: keyboard.pm:274 #, c-format msgid "" "_: keyboard\n" "Polish (qwerty layout)" msgstr "Полска (QWERTY наредба)" #: keyboard.pm:275 #, c-format msgid "" "_: keyboard\n" "Polish (qwertz layout)" msgstr "Полска (QWERTZ наредба)" #: keyboard.pm:277 #, fuzzy, c-format msgid "" "_: keyboard\n" "Pashto" msgstr "Полска" #: keyboard.pm:278 #, c-format msgid "" "_: keyboard\n" "Portuguese" msgstr "Португалска" #: keyboard.pm:280 #, c-format msgid "" "_: keyboard\n" "Canadian (Quebec)" msgstr "Канадска (Квебек)" #: keyboard.pm:282 #, c-format msgid "" "_: keyboard\n" "Romanian (qwertz)" msgstr "Румънска (qwertz)" #: keyboard.pm:283 #, c-format msgid "" "_: keyboard\n" "Romanian (qwerty)" msgstr "Румънска (qwerty)" #: keyboard.pm:285 #, c-format msgid "" "_: keyboard\n" "Russian (phonetic)" msgstr "Руска (фонетична)" #: keyboard.pm:286 #, c-format msgid "" "_: keyboard\n" "Saami (norwegian)" msgstr "Саами (норвежка)" #: keyboard.pm:287 #, fuzzy, c-format msgid "" "_: keyboard\n" "Saami (swedish/finnish)" msgstr "Саами (норвежка)" #: keyboard.pm:289 #, fuzzy, c-format msgid "" "_: keyboard\n" "Sindhi" msgstr "Тайванска клавиатура" #: keyboard.pm:291 #, c-format msgid "" "_: keyboard\n" "Slovenian" msgstr "Словенска" #: keyboard.pm:293 #, c-format msgid "" "_: keyboard\n" "Sinhala" msgstr "" #: keyboard.pm:294 #, c-format msgid "" "_: keyboard\n" "Slovakian (QWERTZ)" msgstr "Словашка (QWERTZ)" #: keyboard.pm:295 #, c-format msgid "" "_: keyboard\n" "Slovakian (QWERTY)" msgstr "Словашка (QWERTY)" #: keyboard.pm:297 #, c-format msgid "" "_: keyboard\n" "Serbian (cyrillic)" msgstr "Сръбска (кирилица)" #: keyboard.pm:298 #, c-format msgid "" "_: keyboard\n" "Syriac" msgstr "Сирийски" #: keyboard.pm:299 #, c-format msgid "" "_: keyboard\n" "Syriac (phonetic)" msgstr "Сирийски (фонетичен)" #: keyboard.pm:300 #, c-format msgid "" "_: keyboard\n" "Telugu" msgstr "Телугу" #: keyboard.pm:302 #, c-format msgid "" "_: keyboard\n" "Tamil (ISCII-layout)" msgstr "Тамилска (ISCII-подредба)" #: keyboard.pm:303 #, c-format msgid "" "_: keyboard\n" "Tamil (Typewriter-layout)" msgstr "Тамилска (пишеща машина)" #: keyboard.pm:304 #, fuzzy, c-format msgid "" "_: keyboard\n" "Thai (Kedmanee)" msgstr "Тайванска клавиатура" #: keyboard.pm:305 #, fuzzy, c-format msgid "" "_: keyboard\n" "Thai (TIS-820)" msgstr "Тайванска клавиатура" #: keyboard.pm:307 #, fuzzy, c-format msgid "" "_: keyboard\n" "Thai (Pattachote)" msgstr "Тайванска клавиатура" #: keyboard.pm:310 #, c-format msgid "" "_: keyboard\n" "Tifinagh (moroccan layout) (+latin/arabic)" msgstr "" #: keyboard.pm:311 #, c-format msgid "" "_: keyboard\n" "Tifinagh (phonetic) (+latin/arabic)" msgstr "" #: keyboard.pm:313 #, c-format msgid "" "_: keyboard\n" "Tajik" msgstr "Таджикистанска клавиатура" #: keyboard.pm:315 #, fuzzy, c-format msgid "" "_: keyboard\n" "Turkmen" msgstr "Немска" #: keyboard.pm:316 #, c-format msgid "" "_: keyboard\n" "Turkish (traditional \"F\" model)" msgstr "Турска (традиционен \"F\" модел)" #: keyboard.pm:317 #, c-format msgid "" "_: keyboard\n" "Turkish (modern \"Q\" model)" msgstr "Турска (модерен \"Q\" модел)" #: keyboard.pm:319 #, c-format msgid "" "_: keyboard\n" "Ukrainian" msgstr "Украинска" #: keyboard.pm:322 #, fuzzy, c-format msgid "" "_: keyboard\n" "Urdu keyboard" msgstr "Орийска" #: keyboard.pm:324 #, c-format msgid "US keyboard (international)" msgstr "US клавиатура (международна)" #: keyboard.pm:325 #, c-format msgid "" "_: keyboard\n" "Uzbek (cyrillic)" msgstr "Узбекистанска (кирилица)" #: keyboard.pm:327 #, c-format msgid "" "_: keyboard\n" "Vietnamese \"numeric row\" QWERTY" msgstr "Виетнамска \"числова редица\" QWERTY" #: keyboard.pm:328 #, c-format msgid "" "_: keyboard\n" "Yugoslavian (latin)" msgstr "Югославска (латиница)" #: keyboard.pm:335 #, c-format msgid "Right Alt key" msgstr "Десен Alt клавиш" #: keyboard.pm:336 #, c-format msgid "Both Shift keys simultaneously" msgstr "Двата Shift клавиша едновременно" #: keyboard.pm:337 #, c-format msgid "Control and Shift keys simultaneously" msgstr "Control и Shift клавиши едновремено" #: keyboard.pm:338 #, c-format msgid "CapsLock key" msgstr "CapsLock клавиш" #: keyboard.pm:339 #, fuzzy, c-format msgid "Shift and CapsLock keys simultaneously" msgstr "Ctrl и Alt клавиши едновременно" #: keyboard.pm:340 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "Ctrl и Alt клавиши едновременно" #: keyboard.pm:341 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "Alt и Shift клавиши едновременно" #: keyboard.pm:342 #, c-format msgid "\"Menu\" key" msgstr "\"Menu\" клавиш" #: keyboard.pm:343 #, c-format msgid "Left \"Windows\" key" msgstr "Ляв \"Windows\" клавиш" #: keyboard.pm:344 #, c-format msgid "Right \"Windows\" key" msgstr "Десен \"Windows\" клавиш" #: keyboard.pm:345 #, c-format msgid "Both Control keys simultaneously" msgstr "Двата Ctrl клавиша едновременно" #: keyboard.pm:346 #, c-format msgid "Both Alt keys simultaneously" msgstr "Двата Alt клавиша едновременно" #: keyboard.pm:347 #, c-format msgid "Left Shift key" msgstr "Ляв Shift клавиш" #: keyboard.pm:348 #, c-format msgid "Right Shift key" msgstr "Десен Shift клавиш" #: keyboard.pm:349 #, c-format msgid "Left Alt key" msgstr "Ляв Alt клавиш" #: keyboard.pm:350 #, c-format msgid "Left Control key" msgstr "Ляв клавиш Ctrl" #: keyboard.pm:351 #, c-format msgid "Right Control key" msgstr "Десен Control клавиш" #: keyboard.pm:387 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" "Тук може да изберете клавиш или клавишна комбинация, която \n" "ще ви позволи да избирате различни клавиатурни подредби\n" "(напр. latin и не latin)" #: keyboard.pm:392 #, c-format msgid "" "This setting will be activated after the installation.\n" "During installation, you will need to use the Right Control\n" "key to switch between the different keyboard layouts." msgstr "" #. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR" #. -PO: or as "default:RTL", depending if your language is written from #. -PO: left to right, or from right to left; any other string is wrong. #: lang.pm:178 #, c-format msgid "default:LTR" msgstr "default:LTR" #: lang.pm:195 #, c-format msgid "Andorra" msgstr "Андора" #: lang.pm:196 network/adsl_consts.pm:943 #, c-format msgid "United Arab Emirates" msgstr "Обединени Арабски Емирства" #: lang.pm:197 #, c-format msgid "Afghanistan" msgstr "Афганистан" #: lang.pm:198 #, c-format msgid "Antigua and Barbuda" msgstr "Антигуа и Барбуда" #: lang.pm:199 #, c-format msgid "Anguilla" msgstr "Ангила" #: lang.pm:200 #, c-format msgid "Albania" msgstr "Албания" #: lang.pm:201 #, c-format msgid "Armenia" msgstr "Армения" #: lang.pm:202 #, c-format msgid "Netherlands Antilles" msgstr "Холандски Антили" #: lang.pm:203 #, c-format msgid "Angola" msgstr "Ангола" #: lang.pm:204 #, c-format msgid "Antarctica" msgstr "Антарктика" #: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50 #, c-format msgid "Argentina" msgstr "Аржентина" #: lang.pm:206 #, c-format msgid "American Samoa" msgstr "Американска Самоа" #: lang.pm:209 #, c-format msgid "Aruba" msgstr "Аруба" #: lang.pm:210 #, c-format msgid "Azerbaijan" msgstr "Азербайджан" #: lang.pm:211 #, c-format msgid "Bosnia and Herzegovina" msgstr "Босна и Херцеговина" #: lang.pm:212 #, c-format msgid "Barbados" msgstr "Барбадос" #: lang.pm:213 #, c-format msgid "Bangladesh" msgstr "Бангладеш" #: lang.pm:215 #, c-format msgid "Burkina Faso" msgstr "Буркина Фасо" #: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179 #, c-format msgid "Bulgaria" msgstr "България" #: lang.pm:217 #, c-format msgid "Bahrain" msgstr "Бахрейн" #: lang.pm:218 #, c-format msgid "Burundi" msgstr "Бурунди" #: lang.pm:219 #, c-format msgid "Benin" msgstr "Бенин" #: lang.pm:220 #, c-format msgid "Bermuda" msgstr "Бермуда" #: lang.pm:221 #, c-format msgid "Brunei Darussalam" msgstr "Бруней" #: lang.pm:222 #, c-format msgid "Bolivia" msgstr "Боливия" #: lang.pm:224 #, c-format msgid "Bahamas" msgstr "Бахами" #: lang.pm:225 #, c-format msgid "Bhutan" msgstr "Бутан" #: lang.pm:226 #, c-format msgid "Bouvet Island" msgstr "Остров Бувет" #: lang.pm:227 #, c-format msgid "Botswana" msgstr "Ботсвана" #: lang.pm:228 #, c-format msgid "Belarus" msgstr "Беларус" #: lang.pm:229 #, c-format msgid "Belize" msgstr "Белиз" #: lang.pm:231 #, c-format msgid "Cocos (Keeling) Islands" msgstr "Кокосови Острови" #: lang.pm:232 #, c-format msgid "Congo (Kinshasa)" msgstr "Конго (Киншаса)" #: lang.pm:233 #, c-format msgid "Central African Republic" msgstr "Централноафриканска Република" #: lang.pm:234 #, c-format msgid "Congo (Brazzaville)" msgstr "Конго (Бразивил)" #: lang.pm:236 #, c-format msgid "Cote d'Ivoire" msgstr "Кот д'ивоар" #: lang.pm:237 #, c-format msgid "Cook Islands" msgstr "Острови Кук" #: lang.pm:238 #, c-format msgid "Chile" msgstr "Чили" #: lang.pm:239 #, c-format msgid "Cameroon" msgstr "Камерун" #: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197 #: network/adsl_consts.pm:206 network/adsl_consts.pm:215 #: network/adsl_consts.pm:224 network/adsl_consts.pm:233 #: network/adsl_consts.pm:242 network/adsl_consts.pm:251 #: network/adsl_consts.pm:260 network/adsl_consts.pm:269 #: network/adsl_consts.pm:278 network/adsl_consts.pm:287 #: network/adsl_consts.pm:296 network/adsl_consts.pm:305 #: network/adsl_consts.pm:314 network/adsl_consts.pm:323 #: network/adsl_consts.pm:332 network/adsl_consts.pm:341 #: network/adsl_consts.pm:350 network/adsl_consts.pm:359 #, c-format msgid "China" msgstr "Китай" #: lang.pm:241 #, c-format msgid "Colombia" msgstr "Колумбия" #: lang.pm:243 #, c-format msgid "Serbia & Montenegro" msgstr "Сърбия и Черна Гора" #: lang.pm:244 #, c-format msgid "Cuba" msgstr "Куба" #: lang.pm:245 #, c-format msgid "Cape Verde" msgstr "Капо Верде" #: lang.pm:246 #, c-format msgid "Christmas Island" msgstr "Коледни Острови" #: lang.pm:247 #, c-format msgid "Cyprus" msgstr "Кипър" #: lang.pm:250 #, c-format msgid "Djibouti" msgstr "Джибути" #: lang.pm:252 #, c-format msgid "Dominica" msgstr "Доминика" #: lang.pm:253 #, c-format msgid "Dominican Republic" msgstr "Доминиканска Република" #: lang.pm:254 network/adsl_consts.pm:44 #, c-format msgid "Algeria" msgstr "Алжир" #: lang.pm:255 #, c-format msgid "Ecuador" msgstr "Еквадор" #: lang.pm:257 #, c-format msgid "Egypt" msgstr "Египет" #: lang.pm:258 #, c-format msgid "Western Sahara" msgstr "Западна Сахара" #: lang.pm:259 #, c-format msgid "Eritrea" msgstr "Еритрея" #: lang.pm:261 #, c-format msgid "Ethiopia" msgstr "Етиопия" #: lang.pm:263 #, c-format msgid "Fiji" msgstr "Фиджи" #: lang.pm:264 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "Фолклендски Острови (Малвини)" #: lang.pm:265 #, c-format msgid "Micronesia" msgstr "Микронезия" #: lang.pm:266 #, c-format msgid "Faroe Islands" msgstr "Острови Фаро" #: lang.pm:268 #, c-format msgid "Gabon" msgstr "Габон" #: lang.pm:269 network/adsl_consts.pm:954 network/adsl_consts.pm:965 #: network/netconnect.pm:46 #, c-format msgid "United Kingdom" msgstr "Англия" #: lang.pm:270 #, c-format msgid "Grenada" msgstr "Гренада" #: lang.pm:271 #, c-format msgid "Georgia" msgstr "Грузия" #: lang.pm:272 #, c-format msgid "French Guiana" msgstr "Френска Гвиана" #: lang.pm:273 #, c-format msgid "Ghana" msgstr "Гана" #: lang.pm:274 #, c-format msgid "Gibraltar" msgstr "Гибралтар" #: lang.pm:275 #, c-format msgid "Greenland" msgstr "Гренландия" #: lang.pm:276 #, c-format msgid "Gambia" msgstr "Гамбия" #: lang.pm:277 #, c-format msgid "Guinea" msgstr "Гвинея" #: lang.pm:278 #, c-format msgid "Guadeloupe" msgstr "Гваделупа" #: lang.pm:279 #, c-format msgid "Equatorial Guinea" msgstr "Екваториална Гвинея" #: lang.pm:281 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "Южни Сандвичеви Острови и Южна Джорджия" #: lang.pm:282 #, c-format msgid "Guatemala" msgstr "Гватемала" #: lang.pm:283 #, c-format msgid "Guam" msgstr "Гуам" #: lang.pm:284 #, c-format msgid "Guinea-Bissau" msgstr "Гвинея-Бисау" #: lang.pm:285 #, c-format msgid "Guyana" msgstr "Гияна" #: lang.pm:286 #, fuzzy, c-format msgid "Hong Kong SAR (China)" msgstr "Хонг Конг" #: lang.pm:287 #, c-format msgid "Heard and McDonald Islands" msgstr "Хърд и МакДоналд Острови" #: lang.pm:288 #, c-format msgid "Honduras" msgstr "Хондурас" #: lang.pm:289 #, c-format msgid "Croatia" msgstr "Хърватия" #: lang.pm:290 #, c-format msgid "Haiti" msgstr "Хаити" #: lang.pm:292 #, c-format msgid "Indonesia" msgstr "Индонезия" #: lang.pm:295 #, c-format msgid "India" msgstr "Индия" #: lang.pm:296 #, c-format msgid "British Indian Ocean Territory" msgstr "Английски територии в Индийския океан" #: lang.pm:297 #, c-format msgid "Iraq" msgstr "Ирак" #: lang.pm:298 #, c-format msgid "Iran" msgstr "Иран" #: lang.pm:299 #, c-format msgid "Iceland" msgstr "Исландия" #: lang.pm:301 #, c-format msgid "Jamaica" msgstr "Ямайка" #: lang.pm:302 #, c-format msgid "Jordan" msgstr "Йордания" #: lang.pm:304 #, c-format msgid "Kenya" msgstr "Кения" #: lang.pm:305 #, c-format msgid "Kyrgyzstan" msgstr "Киргизтан" #: lang.pm:306 #, c-format msgid "Cambodia" msgstr "Камбоджа" #: lang.pm:307 #, c-format msgid "Kiribati" msgstr "Кирибати" #: lang.pm:308 #, c-format msgid "Comoros" msgstr "Комори" #: lang.pm:309 #, c-format msgid "Saint Kitts and Nevis" msgstr "Свети Китс и Невис" #: lang.pm:310 #, c-format msgid "Korea (North)" msgstr "Корея (Северна)" #: lang.pm:311 #, c-format msgid "Korea" msgstr "Корея" #: lang.pm:312 #, c-format msgid "Kuwait" msgstr "Кувейт" #: lang.pm:313 #, c-format msgid "Cayman Islands" msgstr "Кайманови Острови" #: lang.pm:314 #, c-format msgid "Kazakhstan" msgstr "Казахстан" #: lang.pm:315 #, c-format msgid "Laos" msgstr "Лаос" #: lang.pm:316 #, c-format msgid "Lebanon" msgstr "Ливан" #: lang.pm:317 #, c-format msgid "Saint Lucia" msgstr "Санта Лучия" #: lang.pm:318 #, c-format msgid "Liechtenstein" msgstr "Лихтенщайн" #: lang.pm:319 #, c-format msgid "Sri Lanka" msgstr "Шри Ланка" #: lang.pm:320 #, c-format msgid "Liberia" msgstr "Либерия" #: lang.pm:321 #, c-format msgid "Lesotho" msgstr "Лесото" #: lang.pm:322 network/adsl_consts.pm:600 #, c-format msgid "Lithuania" msgstr "Литва" #: lang.pm:323 #, c-format msgid "Luxembourg" msgstr "Люксембург" #: lang.pm:324 #, c-format msgid "Latvia" msgstr "Латвия" #: lang.pm:325 #, c-format msgid "Libya" msgstr "Либия" #: lang.pm:326 network/adsl_consts.pm:609 #, c-format msgid "Morocco" msgstr "Мароко" #: lang.pm:327 #, c-format msgid "Monaco" msgstr "Монако" #: lang.pm:328 #, c-format msgid "Moldova" msgstr "Молдова" #: lang.pm:329 #, c-format msgid "Madagascar" msgstr "Мадагаскар" #: lang.pm:330 #, c-format msgid "Marshall Islands" msgstr "Маршалови Острови" #: lang.pm:331 #, c-format msgid "Macedonia" msgstr "Македония" #: lang.pm:332 #, c-format msgid "Mali" msgstr "Мали" #: lang.pm:333 #, c-format msgid "Myanmar" msgstr "Мианмар" #: lang.pm:334 #, c-format msgid "Mongolia" msgstr "Монголия" #: lang.pm:335 #, c-format msgid "Northern Mariana Islands" msgstr "Северни Марианови Острови" #: lang.pm:336 #, c-format msgid "Martinique" msgstr "Мартиника" #: lang.pm:337 #, c-format msgid "Mauritania" msgstr "Мавритания" #: lang.pm:338 #, c-format msgid "Montserrat" msgstr "Монсерат" #: lang.pm:339 #, c-format msgid "Malta" msgstr "Малта" #: lang.pm:340 #, c-format msgid "Mauritius" msgstr "Мавриций" #: lang.pm:341 #, c-format msgid "Maldives" msgstr "Малдиви" #: lang.pm:342 #, c-format msgid "Malawi" msgstr "Малави" #: lang.pm:343 #, c-format msgid "Mexico" msgstr "Мексико" #: lang.pm:344 #, c-format msgid "Malaysia" msgstr "Малайзия" #: lang.pm:345 #, c-format msgid "Mozambique" msgstr "Мозамбик" #: lang.pm:346 #, c-format msgid "Namibia" msgstr "Намибия" #: lang.pm:347 #, c-format msgid "New Caledonia" msgstr "Нова Каледония" #: lang.pm:348 #, c-format msgid "Niger" msgstr "Нигер" #: lang.pm:349 #, c-format msgid "Norfolk Island" msgstr "Норфолк Остров" #: lang.pm:350 #, c-format msgid "Nigeria" msgstr "Нигерия" #: lang.pm:351 #, c-format msgid "Nicaragua" msgstr "Никарагуа" #: lang.pm:354 #, c-format msgid "Nepal" msgstr "Непал" #: lang.pm:355 #, c-format msgid "Nauru" msgstr "Науру" #: lang.pm:356 #, c-format msgid "Niue" msgstr "Нию" #: lang.pm:358 #, c-format msgid "Oman" msgstr "Оман" #: lang.pm:359 #, c-format msgid "Panama" msgstr "Панама" #: lang.pm:360 #, c-format msgid "Peru" msgstr "Перу" #: lang.pm:361 #, c-format msgid "French Polynesia" msgstr "Френска Полинезия" #: lang.pm:362 #, c-format msgid "Papua New Guinea" msgstr "Папуа Нова Гвинея" #: lang.pm:363 #, c-format msgid "Philippines" msgstr "Филипини" #: lang.pm:364 #, c-format msgid "Pakistan" msgstr "Пакистан" #: lang.pm:366 #, c-format msgid "Saint Pierre and Miquelon" msgstr "Свети Пиер и Микелон" #: lang.pm:367 #, c-format msgid "Pitcairn" msgstr "Питкеърн" #: lang.pm:368 #, c-format msgid "Puerto Rico" msgstr "Пуерто Рико" #: lang.pm:369 #, c-format msgid "Palestine" msgstr "Палестина" #: lang.pm:371 #, c-format msgid "Paraguay" msgstr "Парагвай" #: lang.pm:372 #, c-format msgid "Palau" msgstr "Палау" #: lang.pm:373 #, c-format msgid "Qatar" msgstr "Катар" #: lang.pm:374 #, c-format msgid "Reunion" msgstr "Риюниън" #: lang.pm:375 #, c-format msgid "Romania" msgstr "Румъния" #: lang.pm:377 #, c-format msgid "Rwanda" msgstr "Руанда" #: lang.pm:378 #, c-format msgid "Saudi Arabia" msgstr "Саудитска Арабия" #: lang.pm:379 #, c-format msgid "Solomon Islands" msgstr "Соломонови Острови" #: lang.pm:380 #, c-format msgid "Seychelles" msgstr "Сейшели" #: lang.pm:381 #, c-format msgid "Sudan" msgstr "Судан" #: lang.pm:383 #, c-format msgid "Singapore" msgstr "Сингапур" #: lang.pm:384 #, c-format msgid "Saint Helena" msgstr "Света Елена" #: lang.pm:385 network/adsl_consts.pm:747 #, c-format msgid "Slovenia" msgstr "Словения" #: lang.pm:386 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "Свалбард и Ян Майен Острови" #: lang.pm:388 #, c-format msgid "Sierra Leone" msgstr "Сиера Леоне" #: lang.pm:389 #, c-format msgid "San Marino" msgstr "Сан Марино" #: lang.pm:390 network/adsl_consts.pm:737 #, c-format msgid "Senegal" msgstr "Сенегал" #: lang.pm:391 #, c-format msgid "Somalia" msgstr "Сомалия" #: lang.pm:392 #, c-format msgid "Suriname" msgstr "Суринам" #: lang.pm:393 #, c-format msgid "Sao Tome and Principe" msgstr "Сао Томе и Принсипи" #: lang.pm:394 #, c-format msgid "El Salvador" msgstr "Ел Салвадор" #: lang.pm:395 #, c-format msgid "Syria" msgstr "Сирия" #: lang.pm:396 #, c-format msgid "Swaziland" msgstr "Свазиленд" #: lang.pm:397 #, c-format msgid "Turks and Caicos Islands" msgstr "Тюрк и Кайкос Острови" #: lang.pm:398 #, c-format msgid "Chad" msgstr "Чад" #: lang.pm:399 #, c-format msgid "French Southern Territories" msgstr "Франция Южни Територии" #: lang.pm:400 #, c-format msgid "Togo" msgstr "Того" #: lang.pm:402 #, c-format msgid "Tajikistan" msgstr "Таджикистан" #: lang.pm:403 #, c-format msgid "Tokelau" msgstr "Токелау" #: lang.pm:404 #, c-format msgid "East Timor" msgstr "Източен Тимор" #: lang.pm:405 #, c-format msgid "Turkmenistan" msgstr "Туркменистан" #: lang.pm:406 network/adsl_consts.pm:931 #, c-format msgid "Tunisia" msgstr "Тунис" #: lang.pm:407 #, c-format msgid "Tonga" msgstr "Тонга" #: lang.pm:408 #, c-format msgid "Turkey" msgstr "Турция" #: lang.pm:409 #, c-format msgid "Trinidad and Tobago" msgstr "Тринидад и Тобаго" #: lang.pm:410 #, c-format msgid "Tuvalu" msgstr "Тувалу" #: lang.pm:412 #, c-format msgid "Tanzania" msgstr "Танзания" #: lang.pm:413 #, c-format msgid "Ukraine" msgstr "Украйна" #: lang.pm:414 #, c-format msgid "Uganda" msgstr "Уганда" #: lang.pm:415 #, c-format msgid "United States Minor Outlying Islands" msgstr "Малки Острови по крайбрежието на САЩ" #: lang.pm:417 #, c-format msgid "Uruguay" msgstr "Уругвай" #: lang.pm:418 #, c-format msgid "Uzbekistan" msgstr "Узбекистан" #: lang.pm:419 #, c-format msgid "Vatican" msgstr "Ватикана" #: lang.pm:420 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "Свети Винсент и Гренадин" #: lang.pm:421 #, c-format msgid "Venezuela" msgstr "Венецуела" #: lang.pm:422 #, c-format msgid "Virgin Islands (British)" msgstr "Вирджински Острови (Британски)" #: lang.pm:423 #, c-format msgid "Virgin Islands (U.S.)" msgstr "Вирджински Острови (САЩ)" #: lang.pm:424 #, c-format msgid "Vietnam" msgstr "Виетнам" #: lang.pm:425 #, c-format msgid "Vanuatu" msgstr "Вануату" #: lang.pm:426 #, c-format msgid "Wallis and Futuna" msgstr "Уолис и Футуна Острови" #: lang.pm:427 #, c-format msgid "Samoa" msgstr "Самоа" #: lang.pm:428 #, c-format msgid "Yemen" msgstr "Йемен" #: lang.pm:429 #, c-format msgid "Mayotte" msgstr "Майот" #: lang.pm:431 #, c-format msgid "Zambia" msgstr "Замбия" #: lang.pm:432 #, c-format msgid "Zimbabwe" msgstr "Зимбабве" #: lang.pm:1141 #, c-format msgid "Welcome to %s" msgstr "Добре дошли в %s" #: lvm.pm:83 #, c-format msgid "Moving used physical extents to other physical volumes failed" msgstr "" #: lvm.pm:135 #, c-format msgid "Physical volume %s is still in use" msgstr "" #: lvm.pm:145 #, c-format msgid "Remove the logical volumes first\n" msgstr "Първо премахни логичните дялово\n" #: lvm.pm:178 #, c-format msgid "The bootloader can't handle /boot on multiple physicals volumes" msgstr "" #: modules/interactive.pm:21 standalone/drakconnect:1027 #, c-format msgid "Parameters" msgstr "Параметри" #: modules/interactive.pm:21 standalone/draksec:51 #, c-format msgid "NONE" msgstr "" #: modules/interactive.pm:22 #, c-format msgid "Module configuration" msgstr "Настройка на модул" #: modules/interactive.pm:22 #, c-format msgid "You can configure each parameter of the module here." msgstr "Вие може да конфигурирате всеки параметър на модулът тук." #: modules/interactive.pm:63 #, c-format msgid "Found %s interfaces" msgstr "Намерени са %s интерфейси" #: modules/interactive.pm:64 #, c-format msgid "Do you have another one?" msgstr "Имате ли друг(и) ?" #: modules/interactive.pm:65 #, c-format msgid "Do you have any %s interfaces?" msgstr "Имате ли някакъв %s интерфейс?" #: modules/interactive.pm:71 #, c-format msgid "See hardware info" msgstr "Виж хардуерната информация" #: modules/interactive.pm:82 #, fuzzy, c-format msgid "Installing driver for USB controller" msgstr "Инсталиране на драйвер за %s платка %s" #: modules/interactive.pm:83 #, fuzzy, c-format msgid "Installing driver for firewire controller %s" msgstr "Инсталиране на драйвер за %s платка %s" #: modules/interactive.pm:84 #, fuzzy, c-format msgid "Installing driver for hard drive controller %s" msgstr "Инсталиране на драйвер за %s платка %s" #: modules/interactive.pm:85 #, fuzzy, c-format msgid "Installing driver for ethernet controller %s" msgstr "Инсталиране на драйвер за %s платка %s" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: modules/interactive.pm:96 #, c-format msgid "Installing driver for %s card %s" msgstr "Инсталиране на драйвер за %s платка %s" #: modules/interactive.pm:99 #, c-format msgid "(module %s)" msgstr "(модул %s)" #: modules/interactive.pm:109 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" #: modules/interactive.pm:115 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "Сега можете да подадете опциите му до модула %s.\n" "Опциите са във формат ``име=стойност име2=стойност2 ...''.\n" "Например: ``io=0x300 irq=7''" #: modules/interactive.pm:117 #, c-format msgid "Module options:" msgstr "Опции на модула:" #. -PO: the %s is the driver type (scsi, network, sound,...) #: modules/interactive.pm:130 #, c-format msgid "Which %s driver should I try?" msgstr "Кой %s драйвер да пробвам ?" #: modules/interactive.pm:139 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "В някои случаи, %s драйверът се нуждае от допълнителна информация, за\n" "да работи коректно, въпреки че нормално работи и без нея. Желаете ли " "даподадете\n" "допълнителни опции за него или да разрешите на драйвера да потърси " "информацията\n" "от която се нуждае ? По принцип това може да забие компютъра ви, но няма да " "го повреди." #: modules/interactive.pm:143 #, c-format msgid "Autoprobe" msgstr "Автоматично засичане" #: modules/interactive.pm:143 #, c-format msgid "Specify options" msgstr "Задай опции" #: modules/interactive.pm:155 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "Зареждането на модула %s не успя.\n" "Искате ли да опитате отново с други параметри ?" #: modules/parameters.pm:49 #, c-format msgid "a number" msgstr "номер" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated numbers" msgstr "%d със запетая разделени номера" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated strings" msgstr "%d със запетая разделен низ" #: modules/parameters.pm:53 #, c-format msgid "comma separated numbers" msgstr "номера разделени със запетая" #: modules/parameters.pm:53 #, c-format msgid "comma separated strings" msgstr "низове разделени със запетая" #: mouse.pm:25 #, c-format msgid "Sun - Mouse" msgstr "Мишка на Sun" #: mouse.pm:31 security/level.pm:12 #, c-format msgid "Standard" msgstr "Стандартна" #: mouse.pm:32 #, c-format msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: mouse.pm:33 #, c-format msgid "Generic PS2 Wheel Mouse" msgstr "Обикновенна PS2 мишка" #: mouse.pm:34 #, c-format msgid "GlidePoint" msgstr "GlidePoint" #: mouse.pm:36 network/modem.pm:47 network/modem.pm:48 network/modem.pm:49 #: network/modem.pm:68 network/modem.pm:81 network/modem.pm:86 #: network/modem.pm:115 network/netconnect.pm:585 network/netconnect.pm:590 #: network/netconnect.pm:602 network/netconnect.pm:607 #: network/netconnect.pm:623 network/netconnect.pm:625 #, c-format msgid "Automatic" msgstr "Автоматично" #: mouse.pm:39 mouse.pm:73 #, c-format msgid "Kensington Thinking Mouse" msgstr "Kensington THinking Mouse" #: mouse.pm:40 mouse.pm:68 #, c-format msgid "Genius NetMouse" msgstr "Genuis NetMouse" #: mouse.pm:41 #, c-format msgid "Genius NetScroll" msgstr "Genius NetScroll" #: mouse.pm:42 mouse.pm:52 #, c-format msgid "Microsoft Explorer" msgstr "Microsoft Explorer" #: mouse.pm:47 mouse.pm:79 #, c-format msgid "1 button" msgstr "1 бутон" #: mouse.pm:48 mouse.pm:57 #, c-format msgid "Generic 2 Button Mouse" msgstr "Обикновенна 2-бутонна мишка" #: mouse.pm:50 mouse.pm:59 #, c-format msgid "Generic 3 Button Mouse with Wheel emulation" msgstr "Обикновенна 3-бутонна мишка с емулация на колелце" #: mouse.pm:51 #, c-format msgid "Wheel" msgstr "Wheel" #: mouse.pm:55 #, c-format msgid "serial" msgstr "серийна" #: mouse.pm:58 #, c-format msgid "Generic 3 Button Mouse" msgstr "Обикновенна 3-бутонна мишка" #: mouse.pm:60 #, c-format msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: mouse.pm:61 #, c-format msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: mouse.pm:62 #, fuzzy, c-format msgid "Logitech MouseMan with Wheel emulation" msgstr "Logitech MouseMan" #: mouse.pm:63 #, c-format msgid "Mouse Systems" msgstr "Mouse Systems" #: mouse.pm:65 #, c-format msgid "Logitech CC Series" msgstr "Logitech CC Series" #: mouse.pm:66 #, c-format msgid "Logitech CC Series with Wheel emulation" msgstr "Logitech CC Series с емулация на колелце" #: mouse.pm:67 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: mouse.pm:69 #, c-format msgid "MM Series" msgstr "MM Series" #: mouse.pm:70 #, c-format msgid "MM HitTablet" msgstr "MM HitTablet" #: mouse.pm:71 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech Mouse (серийна, от стария тип C7)" #: mouse.pm:72 #, c-format msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" msgstr "Logitech Mouse (серийна, от стария тип C7) с емулация на колелце" #: mouse.pm:74 #, c-format msgid "Kensington Thinking Mouse with Wheel emulation" msgstr "Kensington THinking Mouse с колелце" #: mouse.pm:77 #, c-format msgid "busmouse" msgstr "BUS мишка" #: mouse.pm:80 #, c-format msgid "2 buttons" msgstr "2 бутона" #: mouse.pm:81 #, c-format msgid "3 buttons" msgstr "3 бутона" #: mouse.pm:82 #, c-format msgid "3 buttons with Wheel emulation" msgstr "3 бутона с емулация на колелце" #: mouse.pm:86 #, c-format msgid "Universal" msgstr "Universal" #: mouse.pm:88 #, c-format msgid "Any PS/2 & USB mice" msgstr "" #: mouse.pm:89 #, fuzzy, c-format msgid "Microsoft Xbox Controller S" msgstr "Microsoft Explorer" #: mouse.pm:93 standalone/drakconnect:351 standalone/drakvpn:1126 #, c-format msgid "none" msgstr "няма" #: mouse.pm:95 #, c-format msgid "No mouse" msgstr "Без мишка" #: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435 #, c-format msgid "Synaptics Touchpad" msgstr "" #: mouse.pm:561 #, c-format msgid "Please test the mouse" msgstr "Моля, пробвайте мишката си" #: mouse.pm:563 #, c-format msgid "To activate the mouse," msgstr "За да активирате мишката си," #: mouse.pm:564 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "БУТНЕТЕ ТОПЧЕТО !" #: network/drakfirewall.pm:12 share/compssUsers.pl:85 #, c-format msgid "Web Server" msgstr "Web Сървър" #: network/drakfirewall.pm:17 #, c-format msgid "Domain Name Server" msgstr "Domain Name Server" #: network/drakfirewall.pm:22 #, fuzzy, c-format msgid "SSH server" msgstr "SSH Сървър" #: network/drakfirewall.pm:27 #, c-format msgid "FTP server" msgstr "FTP сървър" #: network/drakfirewall.pm:32 #, c-format msgid "Mail Server" msgstr "Пощенски сървър" #: network/drakfirewall.pm:37 #, c-format msgid "POP and IMAP Server" msgstr "POP и IMAP сървър" #: network/drakfirewall.pm:42 #, fuzzy, c-format msgid "Telnet server" msgstr "X сървър" #: network/drakfirewall.pm:48 #, c-format msgid "Windows Files Sharing (SMB)" msgstr "" #: network/drakfirewall.pm:54 #, fuzzy, c-format msgid "CUPS server" msgstr "DNS сървър" #: network/drakfirewall.pm:60 #, c-format msgid "Echo request (ping)" msgstr "" #: network/drakfirewall.pm:65 #, c-format msgid "BitTorrent" msgstr "" #: network/drakfirewall.pm:74 #, c-format msgid "Port scan detection" msgstr "" #: network/drakfirewall.pm:165 #, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandriva Linux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized Mandriva Security Firewall distribution." msgstr "" "Настройчик за малка защитна стена\n" "\n" "Това настройва персонална защитна стена за тази Mandriva Linux машина.\n" "За мощно постветено на защитата решение, моле, погледнете специализираната\n" "Mandriva Security Firewall дистрибуция." #: network/drakfirewall.pm:171 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" "drakfirewall конфигурация\n" "\n" "Убедете се, че вие имате конфигуриран Интернет/Интранет достъп с\n" "drakconnect преди да правите други неща по-нататък." #: network/drakfirewall.pm:188 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "" #: network/drakfirewall.pm:191 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n" "Have a look at /etc/services for information." msgstr "" "Вие може да въведете други портове. \n" "Валидни са например: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n" "Погледнете в /etc/services за информация" #: network/drakfirewall.pm:197 #, fuzzy, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535.\n" "\n" "You can also give a range of ports (eg: 24300:24350/udp)" msgstr "" "Зададен е грешен порт: %s.\n" "Форматът е \"port/tcp\" или \"port/udp\", \n" "където порт е между 1 и 65535." #: network/drakfirewall.pm:207 #, c-format msgid "Everything (no firewall)" msgstr "Всичко (без firewall)" #: network/drakfirewall.pm:209 #, c-format msgid "Other ports" msgstr "Други портовете" #: network/drakfirewall.pm:251 network/drakfirewall.pm:254 #: standalone/drakids:33 standalone/drakids:136 standalone/drakids:145 #: standalone/drakids:170 standalone/drakids:179 standalone/drakids:189 #: standalone/drakids:265 standalone/net_applet:59 standalone/net_applet:202 #: standalone/net_applet:380 standalone/net_applet:417 #, fuzzy, c-format msgid "Interactive Firewall" msgstr "Защитна стена" #: network/drakfirewall.pm:252 #, c-format msgid "" "You can be warned when someone accesses to a service or tries to intrude " "into your computer.\n" "Please select which network activity should be watched." msgstr "" #: network/drakfirewall.pm:257 #, c-format msgid "Use Interactive Firewall" msgstr "" #: network/ifw.pm:136 #, fuzzy, c-format msgid "Port scanning" msgstr "Не поделя" #: network/ifw.pm:137 #, fuzzy, c-format msgid "Service attack" msgstr "_Тип услуга:" #: network/ifw.pm:138 #, fuzzy, c-format msgid "Password cracking" msgstr "Парола (отново)" #: network/ifw.pm:139 #, c-format msgid "\"%s\" attack" msgstr "" #: network/ifw.pm:141 #, c-format msgid "A port scanning attack has been attempted by %s." msgstr "" #: network/ifw.pm:142 #, fuzzy, c-format msgid "The %s service has been attacked by %s." msgstr "Това събитие е било променено." #: network/ifw.pm:143 #, c-format msgid "A password cracking attack has been attempted by %s." msgstr "" #: network/ifw.pm:144 #, fuzzy, c-format msgid "A \"%s\" attack has been attempted by %s" msgstr "Това събитие е било променено." #: network/isdn.pm:117 network/netconnect.pm:452 network/netconnect.pm:546 #: network/netconnect.pm:549 network/netconnect.pm:692 #: network/netconnect.pm:696 #, c-format msgid "Unlisted - edit manually" msgstr "" #: network/isdn.pm:160 network/netconnect.pm:384 #, c-format msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: network/isdn.pm:160 network/netconnect.pm:384 #, c-format msgid "I do not know" msgstr "Не знам" #: network/isdn.pm:161 network/netconnect.pm:384 #, c-format msgid "PCI" msgstr "PCI" #: network/isdn.pm:162 network/netconnect.pm:384 #, c-format msgid "USB" msgstr "USB" #: network/modem.pm:47 network/modem.pm:48 network/modem.pm:49 #: network/netconnect.pm:590 network/netconnect.pm:607 #: network/netconnect.pm:623 #, c-format msgid "Manual" msgstr "Ръчно" #: network/ndiswrapper.pm:27 #, c-format msgid "No device supporting the %s ndiswrapper driver is present!" msgstr "" #: network/ndiswrapper.pm:33 #, c-format msgid "Please select the Windows driver (.inf file)" msgstr "" #: network/ndiswrapper.pm:42 #, c-format msgid "Unable to install the %s ndiswrapper driver!" msgstr "" #: network/ndiswrapper.pm:89 #, c-format msgid "Unable to load the ndiswrapper module!" msgstr "" #: network/ndiswrapper.pm:95 #, c-format msgid "" "The selected device has already been configured with the %s driver.\n" "Do you really want to use a ndiswrapper driver?" msgstr "" #: network/ndiswrapper.pm:101 #, c-format msgid "Unable to find the ndiswrapper interface!" msgstr "" #: network/netconnect.pm:69 network/netconnect.pm:482 #: network/netconnect.pm:494 #, fuzzy, c-format msgid "Manual choice" msgstr "ръчно" #: network/netconnect.pm:69 #, c-format msgid "Internal ISDN card" msgstr "Вътрешна ISDN карта" #: network/netconnect.pm:80 printer/printerdrake.pm:1643 standalone/drakups:75 #, c-format msgid "Manual configuration" msgstr "Ръчна настройка" #: network/netconnect.pm:81 standalone/drakroam:121 #, fuzzy, c-format msgid "Automatic IP (BOOTP/DHCP)" msgstr "Автоматичен IP адрес" #: network/netconnect.pm:83 #, c-format msgid "Automatic IP (BOOTP/DHCP/Zeroconf)" msgstr "" #: network/netconnect.pm:86 #, c-format msgid "Protocol for the rest of the world" msgstr "Протокол за останалия свят" #: network/netconnect.pm:88 standalone/drakconnect:563 #, c-format msgid "European protocol (EDSS1)" msgstr "Протокол Европа (EDSS1)" #: network/netconnect.pm:89 standalone/drakconnect:564 #, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "Протокол за останалия свят\n" " без D-Канал (наета линия)" #: network/netconnect.pm:103 standalone/harddrake2:309 #: standalone/net_monitor:102 standalone/net_monitor:103 #: standalone/net_monitor:108 #, c-format msgid "unknown" msgstr "неизвестен" #: network/netconnect.pm:120 network/thirdparty.pm:219 #, fuzzy, c-format msgid "Alcatel speedtouch USB modem" msgstr "Alcatel speedtouch USB" #: network/netconnect.pm:121 #, fuzzy, c-format msgid "Sagem USB modem" msgstr "Системен режим" #: network/netconnect.pm:122 #, c-format msgid "Bewan modem" msgstr "" #: network/netconnect.pm:123 #, c-format msgid "ECI Hi-Focus modem" msgstr "" #: network/netconnect.pm:127 #, c-format msgid "Dynamic Host Configuration Protocol (DHCP)" msgstr "" #: network/netconnect.pm:128 #, fuzzy, c-format msgid "Manual TCP/IP configuration" msgstr "Ръчна настройка" #: network/netconnect.pm:129 #, c-format msgid "Point to Point Tunneling Protocol (PPTP)" msgstr "" #: network/netconnect.pm:130 #, c-format msgid "PPP over Ethernet (PPPoE)" msgstr "" #: network/netconnect.pm:131 #, c-format msgid "PPP over ATM (PPPoA)" msgstr "" #: network/netconnect.pm:132 #, c-format msgid "DSL over CAPI" msgstr "" #: network/netconnect.pm:136 #, fuzzy, c-format msgid "Bridged Ethernet LLC" msgstr "Ethernet карта" #: network/netconnect.pm:137 #, fuzzy, c-format msgid "Bridged Ethernet VC" msgstr "Ethernet карта" #: network/netconnect.pm:138 #, c-format msgid "Routed IP LLC" msgstr "" #: network/netconnect.pm:139 #, c-format msgid "Routed IP VC" msgstr "" #: network/netconnect.pm:140 #, c-format msgid "PPPoA LLC" msgstr "" #: network/netconnect.pm:141 #, c-format msgid "PPPoA VC" msgstr "" #: network/netconnect.pm:145 standalone/drakconnect:498 #, c-format msgid "Script-based" msgstr "Базирана на скрипт" #: network/netconnect.pm:146 standalone/drakconnect:498 #, c-format msgid "PAP" msgstr "PAP" #: network/netconnect.pm:147 standalone/drakconnect:498 #, c-format msgid "Terminal-based" msgstr "Базирана на терминал" #: network/netconnect.pm:148 standalone/drakconnect:498 #, c-format msgid "CHAP" msgstr "CHAP" #: network/netconnect.pm:149 standalone/drakconnect:498 #, c-format msgid "PAP/CHAP" msgstr "PAP/CHAP" #: network/netconnect.pm:239 standalone/drakconnect:56 #, fuzzy, c-format msgid "Network & Internet Configuration" msgstr "Настройка на мрежата" #: network/netconnect.pm:245 #, c-format msgid "LAN connection" msgstr "LAN връзка" #: network/netconnect.pm:246 network/netconnect.pm:265 standalone/drakroam:182 #: standalone/drakroam:220 standalone/drakroam:223 #, c-format msgid "Wireless connection" msgstr "Безжична връзка" #: network/netconnect.pm:247 #, c-format msgid "ADSL connection" msgstr "ADSL връзка" #: network/netconnect.pm:248 #, c-format msgid "Cable connection" msgstr "Кабелна връзка" #: network/netconnect.pm:249 #, c-format msgid "ISDN connection" msgstr "ISDN връзка" #: network/netconnect.pm:250 #, c-format msgid "Modem connection" msgstr "Модем" #: network/netconnect.pm:251 #, c-format msgid "DVB connection" msgstr "" #: network/netconnect.pm:261 #, c-format msgid "Choose the connection you want to configure" msgstr "Изберете връзката, който искате да използвате" #: network/netconnect.pm:276 network/netconnect.pm:770 #, c-format msgid "Connection Configuration" msgstr "Настройка на връзката" #: network/netconnect.pm:276 network/netconnect.pm:771 #, c-format msgid "Please fill or check the field below" msgstr "Моля, попълнете или проверете полето по-долу" #: network/netconnect.pm:279 #, c-format msgid "Your personal phone number" msgstr "Личния ви телефонен номер" #: network/netconnect.pm:280 network/netconnect.pm:774 #, c-format msgid "Provider name (ex provider.net)" msgstr "Име на доставчика (напр. provider.net)" #: network/netconnect.pm:281 standalone/drakconnect:493 #, c-format msgid "Provider phone number" msgstr "Телефонен номер на доставчика" #: network/netconnect.pm:282 #, fuzzy, c-format msgid "Provider DNS 1 (optional)" msgstr "1-ви DNS на доставчика (по желание)" #: network/netconnect.pm:283 #, fuzzy, c-format msgid "Provider DNS 2 (optional)" msgstr "2-ри DNS на доставчика (по желание)" #: network/netconnect.pm:284 standalone/drakconnect:444 #, c-format msgid "Dialing mode" msgstr "Режим на набиране" #: network/netconnect.pm:285 standalone/drakconnect:449 #: standalone/drakconnect:517 #, c-format msgid "Connection speed" msgstr "Скорост на връзката" #: network/netconnect.pm:286 standalone/drakconnect:454 #, c-format msgid "Connection timeout (in sec)" msgstr "Timeout на връзката (в сек)" #: network/netconnect.pm:287 network/netconnect.pm:312 #: network/netconnect.pm:777 standalone/drakconnect:491 #, c-format msgid "Account Login (user name)" msgstr "Име на акаунта (потебителско име)" #: network/netconnect.pm:288 network/netconnect.pm:313 #: network/netconnect.pm:778 standalone/drakconnect:492 #, c-format msgid "Account Password" msgstr "Парола на акаунта" #: network/netconnect.pm:289 standalone/drakconnect:554 #, c-format msgid "Card IRQ" msgstr "IRQ на картата" #: network/netconnect.pm:290 standalone/drakconnect:555 #, c-format msgid "Card mem (DMA)" msgstr "Памет (DMA) на картата" #: network/netconnect.pm:291 standalone/drakconnect:556 #, c-format msgid "Card IO" msgstr "IO на картата" #: network/netconnect.pm:292 standalone/drakconnect:557 #, c-format msgid "Card IO_0" msgstr "IO_0 на картата" #: network/netconnect.pm:293 #, c-format msgid "Card IO_1" msgstr "IO_1 на картата" #: network/netconnect.pm:308 #, fuzzy, c-format msgid "Cable: account options" msgstr "Опции за избиране по телефон" #: network/netconnect.pm:311 #, c-format msgid "Use BPALogin (needed for Telstra)" msgstr "" #: network/netconnect.pm:337 network/netconnect.pm:659 #: network/netconnect.pm:810 network/netconnect.pm:1149 #, fuzzy, c-format msgid "Select the network interface to configure:" msgstr "Изберете мрежов интерфейс" #: network/netconnect.pm:339 network/netconnect.pm:374 #: network/netconnect.pm:660 network/netconnect.pm:812 network/shorewall.pm:70 #: standalone/drakconnect:713 #, c-format msgid "Net Device" msgstr "Мрежово у-во" #: network/netconnect.pm:340 network/netconnect.pm:345 #, c-format msgid "External ISDN modem" msgstr "Външен ISDN модем" #: network/netconnect.pm:373 standalone/harddrake2:216 #, c-format msgid "Select a device!" msgstr "Изберете устройство !" #: network/netconnect.pm:382 network/netconnect.pm:392 #: network/netconnect.pm:402 network/netconnect.pm:435 #: network/netconnect.pm:449 #, c-format msgid "ISDN Configuration" msgstr "Настройка на IDSN" #: network/netconnect.pm:383 #, c-format msgid "What kind of card do you have?" msgstr "Какъв тип карта имате ?" #: network/netconnect.pm:393 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "Ако имате ISA карта, стойностите на следващия екран трябва да са верни.\n" "\n" "Ако имате PCMCIA карта, ще трябва да знаете IRC и IO на картата си.\n" #: network/netconnect.pm:397 #, c-format msgid "Continue" msgstr "Нататък" #: network/netconnect.pm:397 #, c-format msgid "Abort" msgstr "Отказ" #: network/netconnect.pm:403 #, c-format msgid "Which of the following is your ISDN card?" msgstr "Коя от следните ISDN картати е вашата ?" #: network/netconnect.pm:421 #, c-format msgid "" "A CAPI driver is available for this modem. This CAPI driver can offer more " "capabilities than the free driver (like sending faxes). Which driver do you " "want to use?" msgstr "" #: network/netconnect.pm:423 standalone/drakconnect:109 standalone/drakups:251 #: standalone/harddrake2:133 #, c-format msgid "Driver" msgstr "Драйвер" #: network/netconnect.pm:435 #, c-format msgid "Which protocol do you want to use?" msgstr "Какъв протокол желаете да промените ?" #: network/netconnect.pm:437 standalone/drakconnect:109 #: standalone/drakconnect:300 standalone/drakconnect:562 #: standalone/drakids:207 standalone/drakvpn:1128 #, c-format msgid "Protocol" msgstr "Протокол" #: network/netconnect.pm:449 #, c-format msgid "" "Select your provider.\n" "If it is not listed, choose Unlisted." msgstr "" "Посочете доставчика си.\n" " Ако не е в списъка, изберете Unlisted" #: network/netconnect.pm:451 network/netconnect.pm:545 #: network/netconnect.pm:691 #, fuzzy, c-format msgid "Provider:" msgstr "Профил: " #: network/netconnect.pm:460 #, c-format msgid "" "Your modem is not supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" "Вашият модем не се поддържа от системата.\n" "Погледнете в http://www.linmodems.org" #: network/netconnect.pm:479 #, fuzzy, c-format msgid "Select the modem to configure:" msgstr "Изберете мрежов интерфейс" #: network/netconnect.pm:514 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "Моля, изберете сериен порт към който свързан модемът ви." #: network/netconnect.pm:543 #, fuzzy, c-format msgid "Select your provider:" msgstr "Изберете принтерен spooler" #: network/netconnect.pm:567 #, fuzzy, c-format msgid "Dialup: account options" msgstr "Опции за избиране по телефон" #: network/netconnect.pm:570 #, c-format msgid "Connection name" msgstr "Име на връзката" #: network/netconnect.pm:571 #, c-format msgid "Phone number" msgstr "Телефонен номер" #: network/netconnect.pm:572 #, c-format msgid "Login ID" msgstr "Потребителско име" #: network/netconnect.pm:587 network/netconnect.pm:620 #, fuzzy, c-format msgid "Dialup: IP parameters" msgstr "Параметри" #: network/netconnect.pm:590 #, fuzzy, c-format msgid "IP parameters" msgstr "Параметри" #: network/netconnect.pm:591 network/netconnect.pm:920 #: printer/printerdrake.pm:460 standalone/drakconnect:109 #: standalone/drakconnect:316 standalone/drakconnect:882 #: standalone/drakhosts:197 standalone/drakroam:122 standalone/drakups:286 #, c-format msgid "IP address" msgstr "IP адрес" #: network/netconnect.pm:592 #, fuzzy, c-format msgid "Subnet mask" msgstr "Маска на подмрежа:" #: network/netconnect.pm:604 #, c-format msgid "Dialup: DNS parameters" msgstr "" #: network/netconnect.pm:607 #, c-format msgid "DNS" msgstr "Домейн" #: network/netconnect.pm:608 #, c-format msgid "Domain name" msgstr "Име на домейна" #: network/netconnect.pm:609 network/netconnect.pm:775 #: standalone/drakconnect:992 #, c-format msgid "First DNS Server (optional)" msgstr "Първи DNS сървър (по избор)" #: network/netconnect.pm:610 network/netconnect.pm:776 #: standalone/drakconnect:993 #, c-format msgid "Second DNS Server (optional)" msgstr "Втори DNS сървър (по избор)" #: network/netconnect.pm:611 #, fuzzy, c-format msgid "Set hostname from IP" msgstr "Име на хост за принтера или IP" #: network/netconnect.pm:623 standalone/drakconnect:327 #, c-format msgid "Gateway" msgstr "Gateway" #: network/netconnect.pm:624 standalone/drakroam:124 #, fuzzy, c-format msgid "Gateway IP address" msgstr "IP адрес" #: network/netconnect.pm:659 #, fuzzy, c-format msgid "ADSL configuration" msgstr "Настройка на LAN" #: network/netconnect.pm:689 #, fuzzy, c-format msgid "Please choose your ADSL provider" msgstr "Моля, изберете вашата страна." #: network/netconnect.pm:719 #, c-format msgid "" "Please choose your DSL connection type.\n" "If you do not know it, keep the preselected type." msgstr "" #: network/netconnect.pm:722 #, fuzzy, c-format msgid "ADSL connection type:" msgstr "ADSL връзка" #: network/netconnect.pm:780 #, c-format msgid "Virtual Path ID (VPI):" msgstr "" #: network/netconnect.pm:781 #, c-format msgid "Virtual Circuit ID (VCI):" msgstr "" #: network/netconnect.pm:784 #, fuzzy, c-format msgid "Encapsulation:" msgstr "Ключ за криптиране" #: network/netconnect.pm:814 #, c-format msgid "Manually load a driver" msgstr "" #: network/netconnect.pm:815 #, c-format msgid "Use a Windows driver (with ndiswrapper)" msgstr "" #: network/netconnect.pm:876 #, fuzzy, c-format msgid "Zeroconf hostname resolution" msgstr "Име на Zeroconf хост:" #: network/netconnect.pm:877 network/netconnect.pm:907 #, fuzzy, c-format msgid "Configuring network device %s (driver %s)" msgstr "Настройка на мрежовото устройство %s" #: network/netconnect.pm:878 #, c-format msgid "" "The following protocols can be used to configure a LAN connection. Please " "choose the one you want to use" msgstr "" #: network/netconnect.pm:908 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "Моля, въведете IP настройките за тази машина.\n" "Всяко устройство трябва да бъде въведено като IP адрес\n" "с точково-десетично означение (например, 1.2.3.4)." #: network/netconnect.pm:915 standalone/drakconnect:373 #, c-format msgid "Assign host name from DHCP address" msgstr "Получаване на име от DHCP адрес" #: network/netconnect.pm:916 standalone/drakconnect:375 #, c-format msgid "DHCP host name" msgstr "Име на DHCP хост" #: network/netconnect.pm:921 standalone/drakconnect:321 #: standalone/drakconnect:883 standalone/drakgw:181 #, c-format msgid "Netmask" msgstr "Мрежова маска" #: network/netconnect.pm:923 standalone/drakconnect:437 #, c-format msgid "Track network card id (useful for laptops)" msgstr "Проследяване на ID на мрежовата карта (полезно при лаптопи)" #: network/netconnect.pm:924 standalone/drakconnect:438 #, c-format msgid "Network Hotplugging" msgstr "Мрежов Hotplugging" #: network/netconnect.pm:926 standalone/drakconnect:432 #, c-format msgid "Start at boot" msgstr "Изпълнение при стартиране" #: network/netconnect.pm:928 standalone/drakconnect:460 #, fuzzy, c-format msgid "Metric" msgstr "ограничи" #: network/netconnect.pm:929 #, c-format msgid "Enable IPv6 to IPv4 tunnel" msgstr "" #: network/netconnect.pm:931 standalone/drakconnect:369 #: standalone/drakconnect:886 #, c-format msgid "DHCP client" msgstr "DHCP клиент" #: network/netconnect.pm:933 standalone/drakconnect:379 #, fuzzy, c-format msgid "DHCP timeout (in seconds)" msgstr "Timeout на връзката (в сек)" #: network/netconnect.pm:934 standalone/drakconnect:382 #, fuzzy, c-format msgid "Get DNS servers from DHCP" msgstr "DNS сървър IP" #: network/netconnect.pm:935 standalone/drakconnect:383 #, c-format msgid "Get YP servers from DHCP" msgstr "" #: network/netconnect.pm:936 standalone/drakconnect:384 #, c-format msgid "Get NTPD servers from DHCP" msgstr "" #: network/netconnect.pm:944 printer/printerdrake.pm:1897 #: standalone/drakconnect:676 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "IP адресът трябва да бъде във формат 1.2.3.4" #: network/netconnect.pm:948 standalone/drakconnect:680 #, fuzzy, c-format msgid "Netmask should be in format 255.255.224.0" msgstr "Gateway адреса трябва да бъде във формат 1.2.3.4" #: network/netconnect.pm:952 #, c-format msgid "Warning: IP address %s is usually reserved!" msgstr "" #: network/netconnect.pm:957 standalone/drakTermServ:1852 #: standalone/drakTermServ:1853 standalone/drakTermServ:1854 #, c-format msgid "%s already in use\n" msgstr "" #: network/netconnect.pm:997 #, fuzzy, c-format msgid "Choose an ndiswrapper driver" msgstr "Избор на случаен драйвер" #: network/netconnect.pm:999 #, c-format msgid "Use the ndiswrapper driver %s" msgstr "" #: network/netconnect.pm:999 #, fuzzy, c-format msgid "Install a new driver" msgstr "Инсталиране на системата" #: network/netconnect.pm:1011 #, c-format msgid "Select a device:" msgstr "" #: network/netconnect.pm:1040 #, fuzzy, c-format msgid "Please enter the wireless parameters for this card:" msgstr "Моля, въведете име на хост или IP." #: network/netconnect.pm:1043 standalone/drakconnect:404 #: standalone/drakroam:52 #, fuzzy, c-format msgid "Operating Mode" msgstr "Разширени функиции" #: network/netconnect.pm:1044 #, c-format msgid "Ad-hoc" msgstr "" #: network/netconnect.pm:1044 #, c-format msgid "Managed" msgstr "Управляем" #: network/netconnect.pm:1044 #, c-format msgid "Master" msgstr "Главен" #: network/netconnect.pm:1044 #, c-format msgid "Repeater" msgstr "Повтаряем" #: network/netconnect.pm:1044 #, c-format msgid "Secondary" msgstr "Вторичен" #: network/netconnect.pm:1044 #, c-format msgid "Auto" msgstr "Автоматично" #: network/netconnect.pm:1047 standalone/drakconnect:405 #: standalone/drakroam:115 #, c-format msgid "Network name (ESSID)" msgstr "" #: network/netconnect.pm:1048 standalone/drakroam:116 #, c-format msgid "Encryption mode" msgstr "" #: network/netconnect.pm:1053 #, c-format msgid "Allow access point roaming" msgstr "" #: network/netconnect.pm:1055 standalone/drakconnect:406 #, fuzzy, c-format msgid "Network ID" msgstr "Мрежа" #: network/netconnect.pm:1056 standalone/drakconnect:407 #, c-format msgid "Operating frequency" msgstr "" #: network/netconnect.pm:1057 standalone/drakconnect:408 #, c-format msgid "Sensitivity threshold" msgstr "" #: network/netconnect.pm:1058 standalone/drakconnect:409 #, c-format msgid "Bitrate (in b/s)" msgstr "" #: network/netconnect.pm:1059 standalone/drakconnect:420 #, c-format msgid "RTS/CTS" msgstr "" #: network/netconnect.pm:1060 #, c-format msgid "" "RTS/CTS adds a handshake before each packet transmission to make sure that " "the\n" "channel is clear. This adds overhead, but increase performance in case of " "hidden\n" "nodes or large number of active nodes. This parameter sets the size of the\n" "smallest packet for which the node sends RTS, a value equal to the maximum\n" "packet size disable the scheme. You may also set this parameter to auto, " "fixed\n" "or off." msgstr "" #: network/netconnect.pm:1067 standalone/drakconnect:421 #, fuzzy, c-format msgid "Fragmentation" msgstr "Игрална станция" #: network/netconnect.pm:1068 standalone/drakconnect:422 #, c-format msgid "iwconfig command extra arguments" msgstr "" #: network/netconnect.pm:1069 #, c-format msgid "" "Here, one can configure some extra wireless parameters such as:\n" "ap, channel, commit, enc, power, retry, sens, txpower (nick is already set " "as the hostname).\n" "\n" "See iwconfig(8) man page for further information." msgstr "" #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one #: network/netconnect.pm:1076 standalone/drakconnect:423 #, c-format msgid "iwspy command extra arguments" msgstr "" #: network/netconnect.pm:1077 #, c-format msgid "" "iwspy is used to set a list of addresses in a wireless network\n" "interface and to read back quality of link information for each of those.\n" "\n" "This information is the same as the one available in /proc/net/wireless :\n" "quality of the link, signal strength and noise level.\n" "\n" "See iwpspy(8) man page for further information." msgstr "" #: network/netconnect.pm:1086 standalone/drakconnect:424 #, c-format msgid "iwpriv command extra arguments" msgstr "" #: network/netconnect.pm:1087 #, c-format msgid "" "iwpriv enable to set up optionals (private) parameters of a wireless " "network\n" "interface.\n" "\n" "iwpriv deals with parameters and setting specific to each driver (as opposed " "to\n" "iwconfig which deals with generic ones).\n" "\n" "In theory, the documentation of each device driver should indicate how to " "use\n" "those interface specific commands and their effect.\n" "\n" "See iwpriv(8) man page for further information." msgstr "" #: network/netconnect.pm:1102 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" #: network/netconnect.pm:1106 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" #: network/netconnect.pm:1149 #, c-format msgid "DVB configuration" msgstr "" #: network/netconnect.pm:1150 #, c-format msgid "DVB Adapter" msgstr "" #: network/netconnect.pm:1167 #, c-format msgid "DVB adapter settings" msgstr "" #: network/netconnect.pm:1170 #, c-format msgid "Adapter card" msgstr "" #: network/netconnect.pm:1171 #, c-format msgid "Net demux" msgstr "" #: network/netconnect.pm:1172 #, c-format msgid "PID" msgstr "Процес" #: network/netconnect.pm:1200 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" "Моля, въведете host name за машината.\n" "Host името трябва да буде напълно квалифицирано име,\n" "като ``mybox.mylab.myco.com''.\n" "Можете също да въведете IP адреса на Вашия gateway, ако имате такъв" #: network/netconnect.pm:1205 #, c-format msgid "Last but not least you can also type in your DNS server IP addresses." msgstr "" #: network/netconnect.pm:1207 standalone/drakconnect:991 #, fuzzy, c-format msgid "Host name (optional)" msgstr "Първи DNS сървър (по избор)" #: network/netconnect.pm:1207 standalone/drakhosts:197 #, c-format msgid "Host name" msgstr "Име на хост:" #: network/netconnect.pm:1209 #, fuzzy, c-format msgid "DNS server 1" msgstr "DNS сървър" #: network/netconnect.pm:1210 #, fuzzy, c-format msgid "DNS server 2" msgstr "DNS сървър" #: network/netconnect.pm:1211 #, fuzzy, c-format msgid "DNS server 3" msgstr "DNS сървър" #: network/netconnect.pm:1212 #, fuzzy, c-format msgid "Search domain" msgstr "NIS домейн" #: network/netconnect.pm:1213 #, c-format msgid "By default search domain will be set from the fully-qualified host name" msgstr "" #: network/netconnect.pm:1214 #, c-format msgid "Gateway (e.g. %s)" msgstr "Gateway (напр. %s)" #: network/netconnect.pm:1216 #, c-format msgid "Gateway device" msgstr "Gateway устройство" #: network/netconnect.pm:1225 #, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "DNS сървъра трябва да бъде във формат 1.2.3.4" #: network/netconnect.pm:1230 standalone/drakconnect:685 #, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "Gateway адреса трябва да бъде във формат 1.2.3.4" #: network/netconnect.pm:1243 #, c-format msgid "" "If desired, enter a Zeroconf hostname.\n" "This is the name your machine will use to advertise any of\n" "its shared resources that are not managed by the network.\n" "It is not necessary on most networks." msgstr "" #: network/netconnect.pm:1247 #, c-format msgid "Zeroconf Host name" msgstr "Име на Zeroconf хост:" #: network/netconnect.pm:1250 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "" #: network/netconnect.pm:1260 #, fuzzy, c-format msgid "Do you want to allow users to start the connection?" msgstr "Искате ли да стартирате връзката си при зареждане ?" #: network/netconnect.pm:1273 #, c-format msgid "Do you want to start the connection at boot?" msgstr "Искате ли да стартирате връзката си при зареждане ?" #: network/netconnect.pm:1289 #, fuzzy, c-format msgid "Automatically at boot" msgstr "Изпълнение при стартиране" #: network/netconnect.pm:1291 #, c-format msgid "By using Net Applet in the system tray" msgstr "" #: network/netconnect.pm:1293 #, c-format msgid "Manually (the interface would still be activated at boot)" msgstr "" #: network/netconnect.pm:1302 #, fuzzy, c-format msgid "How do you want to dial this connection?" msgstr "Искате ли да стартирате връзката си при зареждане ?" #: network/netconnect.pm:1315 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "Искате ли сега да опитате връзка към Интернет ?" #: network/netconnect.pm:1323 standalone/drakconnect:1023 #, c-format msgid "Testing your connection..." msgstr "Изпробване на връзката..." #: network/netconnect.pm:1343 #, c-format msgid "The system is now connected to the Internet." msgstr "Системата в момента е свързана към Интернет." #: network/netconnect.pm:1344 #, c-format msgid "For security reasons, it will be disconnected now." msgstr "За ваша сигурност, сега тя ще бъдете отвързана." #: network/netconnect.pm:1345 #, c-format msgid "" "The system does not seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" "Системата не изглежда свързана към Интернет.\n" "Опитайте се да пренастроите връзката." #: network/netconnect.pm:1360 #, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "\n" msgstr "" "Поздравления, мрежовата и интернет настройката е завършена.\n" "\n" #: network/netconnect.pm:1363 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "След като стане това, препоръчваме ви да рестартирате X\n" "средата си, за да избегнете проблеми със смяната името на хоста." #: network/netconnect.pm:1364 #, c-format msgid "" "Problems occurred during configuration.\n" "Test your connection via net_monitor or mcc. If your connection does not " "work, you might want to relaunch the configuration." msgstr "" "Появи се проблем при конфигурацията.\n" "Проверете вашата връзка през net_monitor или mcc. Ако вашата връзка не " "работи , вие трябва да преконфигурирате." #: network/netconnect.pm:1375 #, fuzzy, c-format msgid "(detected on port %s)" msgstr "засечен на порт %s" #. -PO: here, "(detected)" string will be appended to eg "ADSL connection" #: network/netconnect.pm:1377 #, fuzzy, c-format msgid "(detected %s)" msgstr "засечена %s" #: network/netconnect.pm:1377 #, fuzzy, c-format msgid "(detected)" msgstr "засечена " #: network/netconnect.pm:1378 #, c-format msgid "Network Configuration" msgstr "Настройка на мрежата" #: network/netconnect.pm:1379 #, c-format msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "Тъй като правите мрежова инсталация, мрежата ви вече е настроена.\n" "Цъкнете Ok, за да запазите настройката, или Отмяна, за да пренастоите " "Интернет и мрежовата си връзка.\n" #: network/netconnect.pm:1382 #, c-format msgid "The network needs to be restarted. Do you want to restart it?" msgstr "Мрежата се нуждае от престартиране. Искате ли да я престартирам?" #: network/netconnect.pm:1383 #, c-format msgid "" "A problem occurred while restarting the network: \n" "\n" "%s" msgstr "" "Изникна проблем при рестартирането на мрежата:\n" "\n" "%s" #: network/netconnect.pm:1384 #, c-format msgid "" "We are now going to configure the %s connection.\n" "\n" "\n" "Press \"%s\" to continue." msgstr "" "Сега ще настроим %s връзката.\n" "\n" "\n" "\n" "Натиснете \"%s\", за да продължите." #: network/netconnect.pm:1385 #, c-format msgid "Configuration is complete, do you want to apply settings?" msgstr "Настройката завърши,желаете ли да я приложите ?" #: network/netconnect.pm:1386 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "Настроили сте няколко начина за връзка към Интернет.\n" "Изберете този, който искате да използвате.\n" "\n" #: network/netconnect.pm:1387 #, c-format msgid "Internet connection" msgstr "Интернет връзка" #: network/netconnect.pm:1404 #, c-format msgid "" "An unexpected error has happened:\n" "%s" msgstr "" #: network/network.pm:409 network/network.pm:410 #, c-format msgid "Proxies configuration" msgstr "Настройка на proxy" #: network/network.pm:411 #, c-format msgid "HTTP proxy" msgstr "HTTP proxy" #: network/network.pm:412 #, c-format msgid "FTP proxy" msgstr "FTP proxy" #: network/network.pm:415 #, c-format msgid "Proxy should be http://..." msgstr "Proxy-сървъра трябва да е http://..." #: network/network.pm:416 #, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "URL трябва да е започва с 'ftp:' или 'http:'" #: network/shorewall.pm:55 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" msgstr "" #: network/thirdparty.pm:231 #, c-format msgid "Copy the Alcatel microcode as mgmt.o in /usr/share/speedtouch/" msgstr "" #: network/thirdparty.pm:240 #, c-format msgid "" "The ECI Hi-Focus modem cannot be supported due to binary driver distribution " "problem.\n" "\n" "You can find a driver on http://eciadsl.flashtux.org/" msgstr "" #: network/thirdparty.pm:319 #, fuzzy, c-format msgid "Could not install the packages (%s)!" msgstr "Инсталиране на пакета %s" #: network/thirdparty.pm:327 #, c-format msgid "Some packages (%s) are required but aren't available." msgstr "" #: network/thirdparty.pm:328 #, c-format msgid "" "These packages can be found in Mandriva Club or in Mandriva commercial " "releases." msgstr "" #: network/thirdparty.pm:330 #, c-format msgid "" "The required files can also be installed from this URL:\n" "%s" msgstr "" #: network/thirdparty.pm:370 #, fuzzy, c-format msgid "Unable to find \"%s\" on your Windows system!" msgstr "Изтрива шрифтове от вашата система" #: network/thirdparty.pm:372 #, c-format msgid "No Windows system has been detected!" msgstr "" #: network/thirdparty.pm:382 #, c-format msgid "Insert floppy" msgstr "Сложете дискета във флопито" #: network/thirdparty.pm:383 #, c-format msgid "" "Insert a FAT formatted floppy in drive %s with %s in root directory and " "press %s" msgstr "" "Сложете FAT форматирана дискета в устройство %s с %s в главната директория и " "натиснете %s" #: network/thirdparty.pm:393 #, fuzzy, c-format msgid "Floppy access error, unable to mount device %s" msgstr "Къде искате да монтирате устройство %s ?" #: network/thirdparty.pm:403 #, c-format msgid "" "You need the Alcatel microcode.\n" "You can provide it now via a floppy or your windows partition,\n" "or skip and do it later." msgstr "" #: network/thirdparty.pm:407 network/thirdparty.pm:409 #, fuzzy, c-format msgid "Use a floppy" msgstr "Запази на дискета" #: network/thirdparty.pm:407 #, fuzzy, c-format msgid "Use my Windows partition" msgstr "Изчислявам границите на Windows файловата система" #: network/thirdparty.pm:417 #, c-format msgid "Firmware copy failed, file %s not found" msgstr "" #: network/thirdparty.pm:422 standalone/drakautoinst:250 #: standalone/drakvpn:888 standalone/scannerdrake:405 #, c-format msgid "Congratulations!" msgstr "Поздравления !" #: network/thirdparty.pm:422 #, c-format msgid "Firmware copy succeeded" msgstr "" #: network/thirdparty.pm:490 #, c-format msgid "Looking for required software and drivers..." msgstr "" #: network/thirdparty.pm:495 #, fuzzy, c-format msgid "Please wait, running device configuration commands..." msgstr "Моля, изберете ниво на сигурност..." #: network/wireless.pm:8 #, c-format msgid "Open WEP" msgstr "" #: network/wireless.pm:9 #, c-format msgid "Restricted WEP" msgstr "" #: network/wireless.pm:10 #, c-format msgid "WPA Pre-Shared Key" msgstr "" #: partition_table.pm:391 #, c-format msgid "mount failed: " msgstr "монтирането не успя: " #: partition_table.pm:496 #, c-format msgid "Extended partition not supported on this platform" msgstr "Разширени дялове не се поддържат на тази платформа" #: partition_table.pm:514 #, c-format msgid "" "You have a hole in your partition table but I can not use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "Имате празнина в таблицата с дяловете, но не мога да я използвам.\n" "Единственият начин е да преместите главните си дялове, за да имате празно " "място след extended-дяловете" #: partition_table.pm:605 #, c-format msgid "Restoring from file %s failed: %s" msgstr "Възстановяването от файла %s не успя: %s" #: partition_table.pm:607 #, c-format msgid "Bad backup file" msgstr "Лош backup-файл" #: partition_table.pm:627 #, c-format msgid "Error writing to file %s" msgstr "Грешка при запис във файла %s" #: partition_table/raw.pm:253 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" "Нещо лошо става с устройството ви.\n" "Теста за целост на данните пропадна.\n" "Това значи, че писането на каквото и било по диска ще превръща\n" "произволно в боклук" #: pkgs.pm:21 #, c-format msgid "must have" msgstr "нужен" #: pkgs.pm:22 #, c-format msgid "important" msgstr "важен" #: pkgs.pm:23 #, c-format msgid "very nice" msgstr "много добър" #: pkgs.pm:24 #, c-format msgid "nice" msgstr "добър" #: pkgs.pm:25 #, c-format msgid "maybe" msgstr "става" #: pkgs.pm:473 #, fuzzy, c-format msgid "Downloading file %s..." msgstr "Изпращам файлове..." #: printer/cups.pm:105 #, c-format msgid "(on %s)" msgstr "(на %s)" #: printer/cups.pm:105 #, c-format msgid "(on this machine)" msgstr "(на тази машина)" #: printer/cups.pm:117 standalone/printerdrake:200 #, c-format msgid "Configured on other machines" msgstr "Настроено на други машини" #: printer/cups.pm:119 #, c-format msgid "On CUPS server \"%s\"" msgstr "На CUPS сървър \"%s\"" #: printer/cups.pm:119 printer/printerdrake.pm:5064 #: printer/printerdrake.pm:5074 printer/printerdrake.pm:5233 #: printer/printerdrake.pm:5244 printer/printerdrake.pm:5458 #, c-format msgid " (Default)" msgstr " (По подразбиране)" #: printer/data.pm:67 #, c-format msgid "PDQ - Print, Do not Queue" msgstr "PDQ - Печатай, Без Опашка" #: printer/data.pm:68 #, c-format msgid "PDQ" msgstr "PDQ" #: printer/data.pm:80 #, c-format msgid "LPD - Line Printer Daemon" msgstr "LPD - Линеен Принтерен Демон" #: printer/data.pm:81 #, c-format msgid "LPD" msgstr "LPD" #: printer/data.pm:102 #, c-format msgid "LPRng - LPR New Generation" msgstr "LPRng - LPR Ново поколение" #: printer/data.pm:103 #, c-format msgid "LPRng" msgstr "LPRng" #: printer/data.pm:128 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "CUPS - Обща Unix Принтерна Система" #: printer/data.pm:158 #, fuzzy, c-format msgid "CUPS - Common Unix Printing System (remote server)" msgstr "CUPS - Обща Unix Принтерна Система" #: printer/data.pm:159 #, fuzzy, c-format msgid "Remote CUPS" msgstr "Отдалечен CUPS сървър" #: printer/detect.pm:168 printer/detect.pm:252 printer/detect.pm:487 #: printer/detect.pm:560 #, c-format msgid "Unknown Model" msgstr "Неизвестен Модел" #: printer/main.pm:27 #, c-format msgid "Local printer" msgstr "Локален принтер" #: printer/main.pm:28 #, c-format msgid "Remote printer" msgstr "Отдалечен принтер" #: printer/main.pm:29 #, c-format msgid "Printer on remote CUPS server" msgstr "Принтер на отдалечен CUPS сървър" #: printer/main.pm:30 printer/printerdrake.pm:1373 #: printer/printerdrake.pm:1920 #, c-format msgid "Printer on remote lpd server" msgstr "Принтер на отдалечен LPD сървър" #: printer/main.pm:31 #, c-format msgid "Network printer (TCP/Socket)" msgstr "Мрежов принтер (TCP/Socket)" #: printer/main.pm:32 #, fuzzy, c-format msgid "Printer on SMB/Windows server" msgstr "Принтер на SMB/Windows 95/98/NT сървър" #: printer/main.pm:33 #, c-format msgid "Printer on NetWare server" msgstr "Принтер на NetWare сървър" #: printer/main.pm:34 printer/printerdrake.pm:1924 #, c-format msgid "Enter a printer device URI" msgstr "Въведете URI на печатащо устройство" #: printer/main.pm:35 #, c-format msgid "Pipe job into a command" msgstr "Прекарай заданието през команда" #: printer/main.pm:46 #, c-format msgid "recommended" msgstr "препоръчително" #: printer/main.pm:330 printer/main.pm:690 printer/main.pm:1808 #: printer/main.pm:2981 printer/main.pm:2990 printer/printerdrake.pm:973 #: printer/printerdrake.pm:1133 printer/printerdrake.pm:2408 #: printer/printerdrake.pm:5495 #, c-format msgid "Unknown model" msgstr "Неизвестен модел" #: printer/main.pm:355 standalone/printerdrake:199 #, fuzzy, c-format msgid "Configured on this machine" msgstr "(на тази машина)" #: printer/main.pm:361 printer/printerdrake.pm:1463 #, c-format msgid " on parallel port #%s" msgstr " на паралелен порт #%s" #: printer/main.pm:364 printer/printerdrake.pm:1466 #, c-format msgid ", USB printer #%s" msgstr ", USB принтер #%s" #: printer/main.pm:366 #, c-format msgid ", USB printer" msgstr ", USB принтер" #: printer/main.pm:370 #, c-format msgid ", HP printer on a parallel port" msgstr ", HP пример на паралелен порт" #: printer/main.pm:372 #, c-format msgid ", HP printer on USB" msgstr ", HP принтер на USB" #: printer/main.pm:374 #, c-format msgid ", HP printer on HP JetDirect" msgstr ", HP принтер на HP JetDirect" #: printer/main.pm:376 #, c-format msgid ", HP printer" msgstr ", HP принтер" #: printer/main.pm:382 #, c-format msgid ", multi-function device on parallel port #%s" msgstr ", многофункционално устройство на на паралелен порт #%s" #: printer/main.pm:385 #, c-format msgid ", multi-function device on a parallel port" msgstr ", многофункционално устройство на паралелен порт" #: printer/main.pm:387 #, c-format msgid ", multi-function device on USB" msgstr ", многофункционално устройство на USB" #: printer/main.pm:389 #, c-format msgid ", multi-function device on HP JetDirect" msgstr ", многофункционално устройство на HP JetDirect" #: printer/main.pm:391 #, c-format msgid ", multi-function device" msgstr ", многофункционално устройство" #: printer/main.pm:395 #, c-format msgid ", printing to %s" msgstr ", печат на %s" #: printer/main.pm:398 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr " на LPD сървър \"%s\", принтер \"%s\"" #: printer/main.pm:401 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr ", TCP/IP хост \"%s\", порт %s" #: printer/main.pm:406 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr " на SMB/Windows сървър \"%s\", поделен \"%s\"" #: printer/main.pm:411 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr " на Novell сървър \"%s\", принтер \"%s\"" #: printer/main.pm:414 #, c-format msgid ", using command %s" msgstr ", използва команда %s" #: printer/main.pm:429 #, c-format msgid "Parallel port #%s" msgstr "Паралелен порт #%s" #: printer/main.pm:432 printer/printerdrake.pm:1484 #: printer/printerdrake.pm:1511 printer/printerdrake.pm:1529 #, c-format msgid "USB printer #%s" msgstr "USB принтер #%s" #: printer/main.pm:434 #, c-format msgid "USB printer" msgstr "USB принтер" #: printer/main.pm:438 #, c-format msgid "HP printer on a parallel port" msgstr "HP пример на паралелен порт" #: printer/main.pm:440 #, c-format msgid "HP printer on USB" msgstr "HP принтер на USB" #: printer/main.pm:442 #, c-format msgid "HP printer on HP JetDirect" msgstr "HP принтер на HP JetDirect" #: printer/main.pm:444 #, c-format msgid "HP printer" msgstr "HP принтер" #: printer/main.pm:450 #, c-format msgid "Multi-function device on parallel port #%s" msgstr "Многофункционално устройство на на паралелен порт %s" #: printer/main.pm:453 #, c-format msgid "Multi-function device on a parallel port" msgstr "многофункционално устройство на паралелен порт" #: printer/main.pm:455 #, c-format msgid "Multi-function device on USB" msgstr "Многофункционално устройство на USB" #: printer/main.pm:457 #, c-format msgid "Multi-function device on HP JetDirect" msgstr "Многофункционално устройство на HP JetDirect" #: printer/main.pm:459 #, c-format msgid "Multi-function device" msgstr "Многофункционално устройство" #: printer/main.pm:463 #, c-format msgid "Prints into %s" msgstr "Печат на %s" #: printer/main.pm:466 #, c-format msgid "LPD server \"%s\", printer \"%s\"" msgstr "LPD сървър \"%s\", принтер \"%s\"" #: printer/main.pm:469 #, c-format msgid "TCP/IP host \"%s\", port %s" msgstr "TCP/IP хост \"%s\", порт %s" #: printer/main.pm:474 #, c-format msgid "SMB/Windows server \"%s\", share \"%s\"" msgstr "SMB/Windows сървър \"%s\", дял \"%s\"" #: printer/main.pm:479 #, c-format msgid "Novell server \"%s\", printer \"%s\"" msgstr "Novell сървър \"%s\", принтер \"%s\"" #: printer/main.pm:482 #, fuzzy, c-format msgid "Uses command %s" msgstr ", използва команда %s" #: printer/main.pm:484 #, c-format msgid "URI: %s" msgstr "Адрес: %s" #: printer/main.pm:687 printer/printerdrake.pm:1060 #: printer/printerdrake.pm:3232 #, c-format msgid "Raw printer (No driver)" msgstr "'Raw' принтер (Без драйвер)" #: printer/main.pm:1307 printer/printerdrake.pm:211 #: printer/printerdrake.pm:223 #, c-format msgid "Local network(s)" msgstr "Локална мрежа(и)" #: printer/main.pm:1309 printer/printerdrake.pm:227 #, c-format msgid "Interface \"%s\"" msgstr "Интерфейс \"%s\"" #: printer/main.pm:1311 #, c-format msgid "Network %s" msgstr "Мрежа %s" #: printer/main.pm:1313 #, c-format msgid "Host %s" msgstr "Хост %s" #: printer/main.pm:1342 #, c-format msgid "%s (Port %s)" msgstr "%s (Порт %s)" #: printer/printerdrake.pm:24 #, c-format msgid "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned " "on. Download the Windows driver package from the HP web site (the firmware " "on the printer's CD does not work) and extract the firmware file from it by " "decompressing the self-extracting '.exe' file with the 'unzip' utility and " "searching for the 'sihp1000.img' file. Copy this file into the '/etc/" "printer' directory. There it will be found by the automatic uploader script " "and uploaded whenever the printer is connected and turned on.\n" msgstr "" #: printer/printerdrake.pm:67 #, c-format msgid "CUPS printer configuration" msgstr "Настройка на CUPS принтер" #: printer/printerdrake.pm:68 #, c-format msgid "" "Here you can choose whether the printers connected to this machine should be " "accessible by remote machines and by which remote machines." msgstr "" "Тук може да решите дали принтерите свързани към вашата машина ще бъдат " "достъпни от отдалечените машини и от кой." #: printer/printerdrake.pm:69 #, c-format msgid "" "You can also decide here whether printers on remote machines should be " "automatically made available on this machine." msgstr "" "Вие също решавате, дали принтерите на отдалечените машини ще бъдат " "автоматично достъпни на тази машина." #: printer/printerdrake.pm:72 #, c-format msgid "The printers on this machine are available to other computers" msgstr "Принтерите на тази машина с достъпни за другите компютри" #: printer/printerdrake.pm:77 #, c-format msgid "Automatically find available printers on remote machines" msgstr "Автоматично открива наличните принтери наотдалечените машини" #: printer/printerdrake.pm:82 #, c-format msgid "Printer sharing on hosts/networks: " msgstr "Принтер поделен на хсотове/мрежи: " #: printer/printerdrake.pm:84 #, c-format msgid "Custom configuration" msgstr "Потребителска настройка" #: printer/printerdrake.pm:89 standalone/scannerdrake:593 #: standalone/scannerdrake:610 #, c-format msgid "No remote machines" msgstr "Няма отдалечени машини" #: printer/printerdrake.pm:100 #, c-format msgid "Additional CUPS servers: " msgstr "Допълнителни CUPS сървъри" #: printer/printerdrake.pm:107 #, c-format msgid "" "To get access to printers on remote CUPS servers in your local network you " "only need to turn on the \"Automatically find available printers on remote " "machines\" option; the CUPS servers inform your machine automatically about " "their printers. All printers currently known to your machine are listed in " "the \"Remote printers\" section in the main window of Printerdrake. If your " "CUPS server(s) is/are not in your local network, you have to enter the IP " "address(es) and optionally the port number(s) here to get the printer " "information from the server(s)." msgstr "" #: printer/printerdrake.pm:115 #, c-format msgid "Japanese text printing mode" msgstr "Режим за печат на японски текст" #: printer/printerdrake.pm:116 #, c-format msgid "" "Turning on this allows to print plain text files in Japanese language. Only " "use this function if you really want to print text in Japanese, if it is " "activated you cannot print accentuated characters in latin fonts any more " "and you will not be able to adjust the margins, the character size, etc. " "This setting only affects printers defined on this machine. If you want to " "print Japanese text on a printer set up on a remote machine, you have to " "activate this function on that remote machine." msgstr "" #: printer/printerdrake.pm:123 #, c-format msgid "Automatic correction of CUPS configuration" msgstr "Автоматична корекция на CUPS конфигурация" #: printer/printerdrake.pm:125 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically " "made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" " "as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, " "but then you have to take care of these points." msgstr "" #: printer/printerdrake.pm:138 printer/printerdrake.pm:506 #: printer/printerdrake.pm:4697 #, c-format msgid "Remote CUPS server and no local CUPS daemon" msgstr "" #: printer/printerdrake.pm:141 #, c-format msgid "On" msgstr "Включено" #: printer/printerdrake.pm:143 printer/printerdrake.pm:498 #: printer/printerdrake.pm:525 #, c-format msgid "Off" msgstr "Изключено" #: printer/printerdrake.pm:144 printer/printerdrake.pm:507 #, c-format msgid "" "In this mode the local CUPS daemon will be stopped and all printing requests " "go directly to the server specified below. Note that it is not possible to " "define local print queues then and if the specified server is down it cannot " "be printed at all from this machine." msgstr "" #: printer/printerdrake.pm:161 printer/printerdrake.pm:236 #, c-format msgid "Sharing of local printers" msgstr "Поделяне на локални принтери" #: printer/printerdrake.pm:162 #, c-format msgid "" "These are the machines and networks on which the locally connected printer" "(s) should be available:" msgstr "" "Това са машините и мрежите за които локално свързаните принтери ще бъдат " "достъпни:" #: printer/printerdrake.pm:173 #, c-format msgid "Add host/network" msgstr "Добавя хост/мрежа" #: printer/printerdrake.pm:179 #, c-format msgid "Edit selected host/network" msgstr "Редактиране на избран хост/мрежа" #: printer/printerdrake.pm:188 #, c-format msgid "Remove selected host/network" msgstr "Изтриване на избран хост/мрежа" #: printer/printerdrake.pm:219 printer/printerdrake.pm:229 #: printer/printerdrake.pm:241 printer/printerdrake.pm:248 #: printer/printerdrake.pm:279 printer/printerdrake.pm:297 #, c-format msgid "IP address of host/network:" msgstr "IP адрес на хост/мрежа:" #: printer/printerdrake.pm:237 #, c-format msgid "" "Choose the network or host on which the local printers should be made " "available:" msgstr "Избор на мрежа или хост за който локалният принтер ще бъде разрешен:" #: printer/printerdrake.pm:244 #, c-format msgid "Host/network IP address missing." msgstr "" #: printer/printerdrake.pm:252 #, c-format msgid "The entered host/network IP is not correct.\n" msgstr "Въведеният хост/мрежа IP не е правилен.\n" #: printer/printerdrake.pm:253 printer/printerdrake.pm:429 #, c-format msgid "Examples for correct IPs:\n" msgstr "Примери на правилни IP:\n" #: printer/printerdrake.pm:277 #, c-format msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "" "Този адрес/хост вече е в списъка, той не може да бъде добавен отново.\n" #: printer/printerdrake.pm:346 printer/printerdrake.pm:416 #, c-format msgid "Accessing printers on remote CUPS servers" msgstr "Работа с отдалечени CUPS сървъри" #: printer/printerdrake.pm:347 #, c-format msgid "" "Add here the CUPS servers whose printers you want to use. You only need to " "do this if the servers do not broadcast their printer information into the " "local network." msgstr "" #: printer/printerdrake.pm:358 #, c-format msgid "Add server" msgstr "Добавяне на сървър" #: printer/printerdrake.pm:364 #, c-format msgid "Edit selected server" msgstr "Настройка на избрания сървър" #: printer/printerdrake.pm:373 #, c-format msgid "Remove selected server" msgstr "Изтриване на избрания сървър" #: printer/printerdrake.pm:417 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "" #: printer/printerdrake.pm:418 #, c-format msgid "If no port is given, 631 will be taken as default." msgstr "" #: printer/printerdrake.pm:422 #, c-format msgid "Server IP missing!" msgstr "Липсва IP на сървър" #: printer/printerdrake.pm:428 #, c-format msgid "The entered IP is not correct.\n" msgstr "Въведеното IP не е вярно.\n" #: printer/printerdrake.pm:440 printer/printerdrake.pm:2154 #, c-format msgid "The port number should be an integer!" msgstr "Номерът на порта трябва да е цяло число !" #: printer/printerdrake.pm:451 #, c-format msgid "This server is already in the list, it cannot be added again.\n" msgstr "" #: printer/printerdrake.pm:462 printer/printerdrake.pm:2181 #: standalone/drakups:251 standalone/harddrake2:52 #, c-format msgid "Port" msgstr "Порт" #: printer/printerdrake.pm:495 printer/printerdrake.pm:511 #: printer/printerdrake.pm:526 printer/printerdrake.pm:530 #: printer/printerdrake.pm:536 #, fuzzy, c-format msgid "On, Name or IP of remote server:" msgstr "Принтер на отдалечен LPD сървър" #: printer/printerdrake.pm:514 printer/printerdrake.pm:4706 #: printer/printerdrake.pm:4772 #, fuzzy, c-format msgid "CUPS server name or IP address missing." msgstr "Липсва име на NCP сървър !" #: printer/printerdrake.pm:566 printer/printerdrake.pm:586 #: printer/printerdrake.pm:811 printer/printerdrake.pm:880 #: printer/printerdrake.pm:901 printer/printerdrake.pm:927 #: printer/printerdrake.pm:1036 printer/printerdrake.pm:1078 #: printer/printerdrake.pm:1088 printer/printerdrake.pm:1123 #: printer/printerdrake.pm:2241 printer/printerdrake.pm:2456 #: printer/printerdrake.pm:2488 printer/printerdrake.pm:2550 #: printer/printerdrake.pm:2602 printer/printerdrake.pm:2619 #: printer/printerdrake.pm:2663 printer/printerdrake.pm:2703 #: printer/printerdrake.pm:2753 printer/printerdrake.pm:2790 #: printer/printerdrake.pm:2801 printer/printerdrake.pm:3074 #: printer/printerdrake.pm:3079 printer/printerdrake.pm:3227 #: printer/printerdrake.pm:3338 printer/printerdrake.pm:3951 #: printer/printerdrake.pm:4018 printer/printerdrake.pm:4067 #: printer/printerdrake.pm:4070 printer/printerdrake.pm:4202 #: printer/printerdrake.pm:4303 printer/printerdrake.pm:4375 #: printer/printerdrake.pm:4396 printer/printerdrake.pm:4406 #: printer/printerdrake.pm:4497 printer/printerdrake.pm:4592 #: printer/printerdrake.pm:4598 printer/printerdrake.pm:4626 #: printer/printerdrake.pm:4733 printer/printerdrake.pm:4842 #: printer/printerdrake.pm:4862 printer/printerdrake.pm:4871 #: printer/printerdrake.pm:4886 printer/printerdrake.pm:5087 #: printer/printerdrake.pm:5564 printer/printerdrake.pm:5647 #: standalone/printerdrake:75 standalone/printerdrake:590 #, c-format msgid "Printerdrake" msgstr "Printerdrake" #: printer/printerdrake.pm:567 printer/printerdrake.pm:4304 #: printer/printerdrake.pm:4843 #, c-format msgid "Reading printer data..." msgstr "Четене на данни от принтера ..." #: printer/printerdrake.pm:587 #, c-format msgid "Restarting CUPS..." msgstr "Рестартиране на CUPS..." #: printer/printerdrake.pm:614 #, c-format msgid "" "Allow pop-up windows, printer setup and package installation may be canceled" msgstr "" #: printer/printerdrake.pm:616 #, c-format msgid "" "No pop-up windows, printer setup and package installation cannot be canceled" msgstr "" #: printer/printerdrake.pm:622 #, fuzzy, c-format msgid "Printer auto administration" msgstr "Автоматично открива принтер" #: printer/printerdrake.pm:623 #, c-format msgid "" "Here you can configure printer administration tasks which should be done " "automatically." msgstr "" #: printer/printerdrake.pm:626 #, fuzzy, c-format msgid "Do automatic configuration of new printers" msgstr "Настройка на отдалечен принтер" #: printer/printerdrake.pm:627 printer/printerdrake.pm:641 #, fuzzy, c-format msgid "when a USB printer is connected and turned on" msgstr " (Убедете се, че принтерите са свързани и включени).\n" #: printer/printerdrake.pm:630 #, fuzzy, c-format msgid "when Printerdrake is started" msgstr "Големината на дяла не може да бъде променена" #: printer/printerdrake.pm:634 #, c-format msgid "Mode for automatic printer setup:" msgstr "" #: printer/printerdrake.pm:640 #, fuzzy, c-format msgid "Re-enable disabled printers" msgstr "Налични принтери" #: printer/printerdrake.pm:644 #, fuzzy, c-format msgid "when the printing system is started" msgstr "Промяна системата за печат" #: printer/printerdrake.pm:680 #, fuzzy, c-format msgid "Communication error handling for the printer \"%s\"" msgstr "Печатане на принтер \"%s\"" #: printer/printerdrake.pm:682 #, c-format msgid "" "Here you can configure how errors during the communication between your " "computer and the printer \"%s\" should be handled (for example if the " "printer is not turned on)." msgstr "" #: printer/printerdrake.pm:686 #, fuzzy, c-format msgid "The number of retries should be an integer number of at least 1!" msgstr "Номерът на порта трябва да е цяло число !" #: printer/printerdrake.pm:690 #, fuzzy, c-format msgid "The delay between retries should be a positive integer number!" msgstr "Отместването трябва да е положителна цяла стойност!" #: printer/printerdrake.pm:701 #, fuzzy, c-format msgid "Do not disable the printer" msgstr "Изключва Сървър" #: printer/printerdrake.pm:704 #, c-format msgid "Retry infinitely often" msgstr "" #: printer/printerdrake.pm:707 #, fuzzy, c-format msgid "Number of retries" msgstr "Брой бутони" #: printer/printerdrake.pm:712 #, c-format msgid "Delay between retries (in sec)" msgstr "" #: printer/printerdrake.pm:745 printer/printerdrake.pm:765 #, c-format msgid "Select Printer Connection" msgstr "Изберете връзка към принтера" #: printer/printerdrake.pm:746 #, c-format msgid "How is the printer connected?" msgstr "Как е свързан принтерът ?" #: printer/printerdrake.pm:748 #, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these " "printers will be automatically detected." msgstr "" "\n" "Отдалечените на CUPS сървър принтери не трябва да настройвате\n" "тук; тези принтери ще бъдат засечени автоматично." #: printer/printerdrake.pm:751 printer/printerdrake.pm:5089 #, c-format msgid "" "\n" "WARNING: No local network connection active, remote printers can neither be " "detected nor tested!" msgstr "" #: printer/printerdrake.pm:758 #, fuzzy, c-format msgid "" "Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)" msgstr "Автоматично откриване на принтер (Локален, TCP/Socket, и SMB прентери)" #: printer/printerdrake.pm:760 #, c-format msgid "Modify timeout for network printer auto-detection" msgstr "" #: printer/printerdrake.pm:766 #, c-format msgid "Enter the timeout for network printer auto-detection (in msec) here. " msgstr "" #: printer/printerdrake.pm:768 #, c-format msgid "" "The longer you choose the timeout, the more reliable the detections of " "network printers will be, but the scan can take longer then, especially if " "there are many machines with local firewalls in the network. " msgstr "" #: printer/printerdrake.pm:772 #, fuzzy, c-format msgid "The timeout must be a positive integer number!" msgstr "Отместването трябва да е положителна цяла стойност!" #: printer/printerdrake.pm:811 #, c-format msgid "Checking your system..." msgstr "Проверка на вашата система..." #: printer/printerdrake.pm:829 #, c-format msgid "and one unknown printer" msgstr "и един неизвестен принтер" #: printer/printerdrake.pm:831 #, c-format msgid "and %d unknown printers" msgstr "и %d неизвестни принтери" #: printer/printerdrake.pm:835 #, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "Следните принтери\n" "\n" "%s%s\n" "са директно свързани към вашата система" #: printer/printerdrake.pm:837 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "Следния принтер\n" "\n" "%s%s\n" "е директно свързани към вашата система" #: printer/printerdrake.pm:838 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "" "Следният принтер\n" "\n" "%s%s\n" "е директно свързан към вашата система" #: printer/printerdrake.pm:842 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" "\n" "Има един неизвестен принтер включен към вашата систенма" #: printer/printerdrake.pm:843 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" "\n" "Има %d неизвестни принтери включени към вашата систенма" #: printer/printerdrake.pm:846 #, c-format msgid "" "There are no printers found which are directly connected to your machine" msgstr "Няма намерени принтери включени директно към машината ви" #: printer/printerdrake.pm:849 #, c-format msgid " (Make sure that all your printers are connected and turned on).\n" msgstr " (Убедете се, че принтерите са свързани и включени).\n" #: printer/printerdrake.pm:862 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" "Искате ли да разрешите печат на принтерите споменати горе или на принтерите " "в локалната мрежа?\n" #: printer/printerdrake.pm:863 #, c-format msgid "Do you want to enable printing on printers in the local network?\n" msgstr "Искате ли да разрешите печат на принтерите в локалната мрежа?\n" #: printer/printerdrake.pm:865 #, c-format msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "Искатели да разрешите печат за принтерите споменати горе?\n" #: printer/printerdrake.pm:866 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "Сигурни ли сте, че искте да настроите печат за тази машина?\n" #: printer/printerdrake.pm:867 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" "ЗАБЕЛЕЖКА: В зависимост от модела принтер и печатащата система до %d MB " "допълнително софтуер ще бъде инсталиран." #: printer/printerdrake.pm:884 #, c-format msgid "Do not setup printer automatically now, and never do it again" msgstr "" #: printer/printerdrake.pm:928 #, c-format msgid "Searching for new printers..." msgstr "Търси за нови принтери..." #: printer/printerdrake.pm:989 #, c-format msgid "Do not setup printer automatically again" msgstr "" #: printer/printerdrake.pm:996 #, fuzzy, c-format msgid "New printers found" msgstr "Няма намерен принтер!" #: printer/printerdrake.pm:997 #, fuzzy, c-format msgid "New printer found" msgstr "Няма намерен принтер!" #: printer/printerdrake.pm:999 #, c-format msgid "" "The following new printers were found and Printerdrake can automatically set " "them up for you. If you do not want to have all of them set up, unselect the " "ones which should be skipped, or click \"Cancel\" to set up none of them.\n" msgstr "" #: printer/printerdrake.pm:1000 #, c-format msgid "" "The following new printer was found and printerdrake can automatically set " "it up for you. If you do not want to have it set up, unselect it, or click " "\"Cancel\".\n" msgstr "" #: printer/printerdrake.pm:1001 #, c-format msgid "" "Note that for certain printer models additional packages need to be " "installed. So keep your installation media handy.\n" msgstr "" #: printer/printerdrake.pm:1037 printer/printerdrake.pm:1079 #, fuzzy, c-format msgid "Configuring printer on %s..." msgstr "Настройка на принтера \"%s\"..." #: printer/printerdrake.pm:1062 #, c-format msgid "(" msgstr ")" #: printer/printerdrake.pm:1063 #, c-format msgid " on " msgstr "" #: printer/printerdrake.pm:1064 standalone/scannerdrake:137 #, c-format msgid ")" msgstr ")" #: printer/printerdrake.pm:1069 printer/printerdrake.pm:3239 #, c-format msgid "Printer model selection" msgstr "Избор модел на принтера" #: printer/printerdrake.pm:1070 printer/printerdrake.pm:3240 #, c-format msgid "Which printer model do you have?" msgstr "Какъв модел принтер имате ?" #: printer/printerdrake.pm:1071 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please " "choose the correct model from the list." msgstr "" #: printer/printerdrake.pm:1074 printer/printerdrake.pm:3245 #, c-format msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "Ако вашият принтер не е в списъка, изберете съвместим или подобен." #: printer/printerdrake.pm:1089 printer/printerdrake.pm:4863 #, c-format msgid "Configuring printer \"%s\"..." msgstr "Настройка на принтера \"%s\"..." #: printer/printerdrake.pm:1124 #, c-format msgid "" "Now you have turned off automatic printer setup.\n" "\n" msgstr "" #: printer/printerdrake.pm:1125 #, c-format msgid "" "You can turn it back on again by choosing \"%s\" -> \"%s\" in Printerdrake's " "main menu. " msgstr "" #: printer/printerdrake.pm:1125 printer/printerdrake.pm:5139 #, fuzzy, c-format msgid "Configure Auto Administration" msgstr "Отдалечена администрация" #: printer/printerdrake.pm:1126 #, c-format msgid "" "There you can also choose in which situation automatic printer setup is done " "(On Printerdrake startup, on printing system startup, when connecting a new " "USB printer)." msgstr "" #: printer/printerdrake.pm:1274 printer/printerdrake.pm:1286 #: printer/printerdrake.pm:1393 printer/printerdrake.pm:2422 #: printer/printerdrake.pm:2437 printer/printerdrake.pm:2509 #: printer/printerdrake.pm:5106 printer/printerdrake.pm:5293 #, c-format msgid "Add a new printer" msgstr "Добави нов принтер" #: printer/printerdrake.pm:1275 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" #: printer/printerdrake.pm:1288 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected. Also your network printer(s) and your Windows " "machines must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you do not " "need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Добре дошли при Магьосника за конфигуриране на Принтер\n" "\n" "Тай ще ви помогне да инсталирате вашите принтери свързани към компютъра.\n" "\n" "Ако имате принтер(и) свързани към тази машина, включете ги, така че те да " "могат да се конфигурират автоматично.\n" "\n" "Цъкнете на \"Следващо\" когато сте готови, и на \"Прекъсва\" ако не искате " "да настройвате принтерите сега." #: printer/printerdrake.pm:1297 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Добре дошли в Магьосника за конфигуриране на Принтер\n" "\n" "Той ще ви помогне да инсталирате вашите принтери свързани към компютъра.\n" "\n" "Ако имате принтер(и) свързани към тази машина, включете ги, така че те да " "могат да се конфигурират автоматично.\n" "\n" "Цъкнете на \"Следващо\" когато сте готови, и на \"Прекъсва\" ако не искате " "да настройвате принтерите сега." #: printer/printerdrake.pm:1305 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you do not need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: printer/printerdrake.pm:1314 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Добре дошли на Магьосника за конфигуриране на Принтер\n" "\n" "Тай ще ви помогне да инсталирате вашите принтери свързани към компютъра.\n" "\n" "Ако имате принтер(и) свързани към тази машина, включете ги, така че те да " "могат да се конфигурират автоматично.\n" "\n" "Цъкнете на \"Следващо\" когато сте готови, и на \"Прекъсва\" ако не искате " "да настройвате принтерите сега." #: printer/printerdrake.pm:1365 #, c-format msgid "Auto-detect printers connected to this machine" msgstr "Автоматично открива принтери свързани към тази машина" #: printer/printerdrake.pm:1368 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "Автоматично открива принтери свързани директно към локалната мрежа" #: printer/printerdrake.pm:1371 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" "Автоматично открива принтери свързани с машини работещи под Microsoft Windows" #: printer/printerdrake.pm:1374 #, fuzzy, c-format msgid "No auto-detection" msgstr "Автоматично засичане" #: printer/printerdrake.pm:1394 #, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the %s Control Center." msgstr "" #: printer/printerdrake.pm:1430 printer/printerdrake.pm:1662 #: printer/printerdrake.pm:1725 printer/printerdrake.pm:1817 #: printer/printerdrake.pm:1955 printer/printerdrake.pm:2031 #: printer/printerdrake.pm:2198 printer/printerdrake.pm:2291 #: printer/printerdrake.pm:2300 printer/printerdrake.pm:2309 #: printer/printerdrake.pm:2320 printer/printerdrake.pm:2462 #: printer/printerdrake.pm:2562 printer/printerdrake.pm:2608 #: printer/printerdrake.pm:2675 printer/printerdrake.pm:2710 #, fuzzy, c-format msgid "Could not install the %s packages!" msgstr "Инсталиране на пакета %s" #: printer/printerdrake.pm:1432 #, c-format msgid "Skipping Windows/SMB server auto-detection" msgstr "" #: printer/printerdrake.pm:1438 printer/printerdrake.pm:1585 #: printer/printerdrake.pm:1823 printer/printerdrake.pm:2085 #, c-format msgid "Printer auto-detection" msgstr "Автоматично открива принтер" #: printer/printerdrake.pm:1438 #, c-format msgid "Detecting devices..." msgstr "Откриване на устройства ..." #: printer/printerdrake.pm:1469 #, c-format msgid ", network printer \"%s\", port %s" msgstr ", мрежови принтер \"%s\", порт %s" #: printer/printerdrake.pm:1472 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr ", принтер \"%s\" на SMB/Windows сървър \"%s\"" #: printer/printerdrake.pm:1476 #, c-format msgid "Detected %s" msgstr "Засечен %s" #: printer/printerdrake.pm:1481 printer/printerdrake.pm:1508 #: printer/printerdrake.pm:1526 #, c-format msgid "Printer on parallel port #%s" msgstr "Пример на паралелен порт #%s" #: printer/printerdrake.pm:1487 #, c-format msgid "Network printer \"%s\", port %s" msgstr "Мрежов принтер \"%s\", порт %s" #: printer/printerdrake.pm:1490 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "Принтер \"%s\" на SMB/Windows сървър \"%s\"" #: printer/printerdrake.pm:1571 #, c-format msgid "Local Printer" msgstr "Локален принтер" #: printer/printerdrake.pm:1572 #, c-format msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" "Няма намерен локален принтер! За да инсталирате ръчно принтер, въведете име " "на устройство/име на файл във входното поле (Паралелни портове /dev/lp0, /" "dev/lp1, ..., съответсващи на LPT1:, LPT2:, ..., 1-ви USB принтер: /dev/usb/" "lp0, 2-ри USB принтер: /dev/usb/lp1, ...)." #: printer/printerdrake.pm:1576 #, c-format msgid "You must enter a device or file name!" msgstr "Вие трябва да въведете устройство или име на файл!" #: printer/printerdrake.pm:1586 #, c-format msgid "No printer found!" msgstr "Няма намерен принтер!" #: printer/printerdrake.pm:1594 #, c-format msgid "Local Printers" msgstr "Локални принтери" #: printer/printerdrake.pm:1595 #, c-format msgid "Available printers" msgstr "Налични принтери" #: printer/printerdrake.pm:1599 printer/printerdrake.pm:1608 #, c-format msgid "The following printer was auto-detected. " msgstr "Следните принтери са автоматично открити. " #: printer/printerdrake.pm:1601 #, c-format msgid "" "If it is not the one you want to configure, enter a device name/file name in " "the input line" msgstr "" "Ако той не е този който искате да конфигурирате, въведете име на устройство/" "име на файл във входното поле" #: printer/printerdrake.pm:1602 #, c-format msgid "" "Alternatively, you can specify a device name/file name in the input line" msgstr "" "Алтернативно, вие може да зададете име на устройство/файл в изходния ред" #: printer/printerdrake.pm:1603 printer/printerdrake.pm:1612 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "Това е списък на автоматично открити принтери." #: printer/printerdrake.pm:1605 #, c-format msgid "" "Please choose the printer you want to set up or enter a device name/file " "name in the input line" msgstr "" #: printer/printerdrake.pm:1606 #, c-format msgid "" "Please choose the printer to which the print jobs should go or enter a " "device name/file name in the input line" msgstr "" #: printer/printerdrake.pm:1610 #, c-format msgid "" "The configuration of the printer will work fully automatically. If your " "printer was not correctly detected or if you prefer a customized printer " "configuration, turn on \"Manual configuration\"." msgstr "" "Конфигурацията на принтера ще работи напълно автоматично. Ако вашият принтер " "не е бил коректно открит или вие предпочитате на настроите принтера, " "включете на \"Ръчна конфигурация\"." #: printer/printerdrake.pm:1611 #, c-format msgid "Currently, no alternative possibility is available" msgstr "За сега, няма налична алтернатива" #: printer/printerdrake.pm:1614 #, c-format msgid "" "Please choose the printer you want to set up. The configuration of the " "printer will work fully automatically. If your printer was not correctly " "detected or if you prefer a customized printer configuration, turn on " "\"Manual configuration\"." msgstr "" #: printer/printerdrake.pm:1615 #, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "Моля, изберете принтер,към който ще се пращат задачите." #: printer/printerdrake.pm:1617 #, c-format msgid "" "Please choose the port that your printer is connected to or enter a device " "name/file name in the input line" msgstr "" "Моля, изберете порта на който вашият принтер е закачен или въведете име на " "устройство/име на файл във входното поле" #: printer/printerdrake.pm:1618 #, c-format msgid "Please choose the port that your printer is connected to." msgstr "Моля, изберете порт към който свързан принтера ви." #: printer/printerdrake.pm:1620 #, c-format msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" " (Паралелни портове: /dev/lp0, /dev/lp1, ..., съответсващи на LPT1:, " "LPT2:, ..., 1-ви USB принтер: /dev/usb/lp0, 2-ри USB принтер: /dev/usb/" "lp1, ...)." #: printer/printerdrake.pm:1624 #, c-format msgid "You must choose/enter a printer/device!" msgstr "Трябва да въведете/изберете принтер/устройство!" #: printer/printerdrake.pm:1664 printer/printerdrake.pm:1727 #: printer/printerdrake.pm:1819 printer/printerdrake.pm:1957 #: printer/printerdrake.pm:2033 printer/printerdrake.pm:2200 #: printer/printerdrake.pm:2293 printer/printerdrake.pm:2302 #: printer/printerdrake.pm:2311 printer/printerdrake.pm:2322 #, fuzzy, c-format msgid "Aborting" msgstr "Отказ" #: printer/printerdrake.pm:1700 #, c-format msgid "Remote lpd Printer Options" msgstr "Опции на отдалечен lpd-принтер" #: printer/printerdrake.pm:1701 #, c-format msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "За да използвате отдалечен lpd принтер, трябва да предоставите имената на " "хоста на принтерния сървър и името на принтера на този сървър." #: printer/printerdrake.pm:1702 #, c-format msgid "Remote host name" msgstr "Име на отдалечен хост" #: printer/printerdrake.pm:1703 #, c-format msgid "Remote printer name" msgstr "Име на отдалечен принтер" #: printer/printerdrake.pm:1706 #, c-format msgid "Remote host name missing!" msgstr "Липсва име на име на хост !" #: printer/printerdrake.pm:1710 #, c-format msgid "Remote printer name missing!" msgstr "Липсва име на отдалечен принтер !" #: printer/printerdrake.pm:1740 printer/printerdrake.pm:2216 #: printer/printerdrake.pm:2341 standalone/drakTermServ:447 #: standalone/drakTermServ:769 standalone/drakTermServ:785 #: standalone/drakTermServ:1590 standalone/drakTermServ:1599 #: standalone/drakTermServ:1611 standalone/drakbackup:499 #: standalone/drakbackup:605 standalone/drakbackup:640 #: standalone/drakbackup:741 standalone/draknfs:203 #: standalone/draksambashare:623 standalone/draksambashare:790 #: standalone/harddrake2:256 #, c-format msgid "Information" msgstr "Информация" #: printer/printerdrake.pm:1740 printer/printerdrake.pm:2216 #: printer/printerdrake.pm:2341 #, c-format msgid "Detected model: %s %s" msgstr "Открит модел: %s %s" #: printer/printerdrake.pm:1823 printer/printerdrake.pm:2085 #, c-format msgid "Scanning network..." msgstr "Стартиране мрежата...." #: printer/printerdrake.pm:1835 printer/printerdrake.pm:1856 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr ", принтер \"%s\" на сървър \"%s\"" #: printer/printerdrake.pm:1838 printer/printerdrake.pm:1859 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "Принтер \"%s\" на сървър \"%s\"" #: printer/printerdrake.pm:1880 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "Настройки на SMB (Windows 9x/NT) принтер" #: printer/printerdrake.pm:1881 #, c-format msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" "За да печатате на SMB принтер, трябва да дадете името\n" "на SMB хоста (Забележка ! То може да е различно от TCP/IP хоста !)\n" "и възможно IP адреса на принтерския сървър, както и общото име на\n" "принтера, до който искате достъп и подходящо имен, парола и информация\n" "за работната група." #: printer/printerdrake.pm:1882 #, c-format msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" " Ако желаният принтер е открит автоматично, просто изберете го от списъка и " "тогава добавете име на потребител, парола, и/или работна група ако е " "необходимо." #: printer/printerdrake.pm:1884 #, c-format msgid "SMB server host" msgstr "Хост на SMB сървър" #: printer/printerdrake.pm:1885 #, c-format msgid "SMB server IP" msgstr "IP на SMB сървър:" #: printer/printerdrake.pm:1886 standalone/draksambashare:61 #, c-format msgid "Share name" msgstr "Общо име" #: printer/printerdrake.pm:1889 #, c-format msgid "Workgroup" msgstr "Работна група" #: printer/printerdrake.pm:1891 #, c-format msgid "Auto-detected" msgstr "Автоматично засечен" #: printer/printerdrake.pm:1901 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "Трябва да бъдат зададени и името и IP адреса на сървъра !" #: printer/printerdrake.pm:1905 #, c-format msgid "Samba share name missing!" msgstr "Липсва име на SAMBA share !" #: printer/printerdrake.pm:1911 #, c-format msgid "SECURITY WARNING!" msgstr "ПРЕДУПРЕЖДЕНИЕ ЗА СИГУРНОСТ!" #: printer/printerdrake.pm:1912 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: printer/printerdrake.pm:1922 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: printer/printerdrake.pm:1925 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" "Свързва вашият принтер към Linux сървър и позволява Windows машини да се " "свързват към него като клиенти.\n" "\n" "Искате ли, да продължите настройките за този принтер както правехте до сега?" #: printer/printerdrake.pm:2004 #, c-format msgid "NetWare Printer Options" msgstr "Опции за NetWare принтер" #: printer/printerdrake.pm:2005 #, c-format msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "За да печатите на NetWare принтер ,трябва да знаете имео му и възможно\n" "адреса на сървъра, както и името на опашката,потребителското име,парола. " "(забележка! той може да е различен от TCP/IP име на хост!)" #: printer/printerdrake.pm:2006 #, c-format msgid "Printer Server" msgstr "Сървър на принтера" #: printer/printerdrake.pm:2007 #, c-format msgid "Print Queue Name" msgstr "Име на печатната опашката" #: printer/printerdrake.pm:2012 #, c-format msgid "NCP server name missing!" msgstr "Липсва име на NCP сървър !" #: printer/printerdrake.pm:2016 #, c-format msgid "NCP queue name missing!" msgstr "Липсва име на NCP опашка !" #: printer/printerdrake.pm:2097 printer/printerdrake.pm:2118 #, c-format msgid ", host \"%s\", port %s" msgstr ", хост \"%s\", порт %s" #: printer/printerdrake.pm:2100 printer/printerdrake.pm:2121 #, c-format msgid "Host \"%s\", port %s" msgstr "Хост \"%s\", порт %s" #: printer/printerdrake.pm:2143 #, c-format msgid "TCP/Socket Printer Options" msgstr "TCP/Socket Опции на принтер" #: printer/printerdrake.pm:2145 #, c-format msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) in the input fields." msgstr "" "Изберете един от автоматично откритите принтери в списъка горе или въведете " "име на хост или IP и опционално номер на порт (подразбиращ 9100) в полето." #: printer/printerdrake.pm:2146 #, c-format msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" "За да печатате на socket или TCP принтер, трябва да предоставите името на " "хоста на принтера и, евентуално, номер на порт. На HP JetDirect сървъри, " "номерът на порта обикновенно е 9100, на други сървъри може да варира. Вижте " "ръковоството на хардуера си." #: printer/printerdrake.pm:2150 #, c-format msgid "Printer host name or IP missing!" msgstr "Липсва име на хост на принтера или IP!" #: printer/printerdrake.pm:2179 #, c-format msgid "Printer host name or IP" msgstr "Име на хост за принтера или IP" #: printer/printerdrake.pm:2242 #, fuzzy, c-format msgid "Refreshing Device URI list..." msgstr "Опресняване на данните от принтера ..." #: printer/printerdrake.pm:2245 printer/printerdrake.pm:2247 #, c-format msgid "Printer Device URI" msgstr "Печатащо устройство URI" #: printer/printerdrake.pm:2246 #, c-format msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" "Трябва директно да определите URI за достъп до принтера. URI трябва да " "изпълни или CUPS или Foomatic спецификациите. Отбележете, че не всички " "типове URI се поддрържат от spooler-ите." #: printer/printerdrake.pm:2272 #, c-format msgid "A valid URI must be entered!" msgstr "Трябва да бъде въведен валиден URI!" #: printer/printerdrake.pm:2377 #, c-format msgid "Pipe into command" msgstr "Програмен канал към команда" #: printer/printerdrake.pm:2378 #, c-format msgid "" "Here you can specify any arbitrary command line into which the job should be " "piped instead of being sent directly to a printer." msgstr "" #: printer/printerdrake.pm:2379 #, c-format msgid "Command line" msgstr "Команден ред" #: printer/printerdrake.pm:2383 #, c-format msgid "A command line must be entered!" msgstr "Трябва да бъде въведен команден ред!" #: printer/printerdrake.pm:2423 #, c-format msgid "" "On many HP printers there are special functions available, maintenance (ink " "level checking, nozzle cleaning. head alignment, ...) on all not too old " "inkjets, scanning on multi-function devices, and memory card access on " "printers with card readers. " msgstr "" #: printer/printerdrake.pm:2425 #, c-format msgid "" "To access these extra functions on your HP printer, it must be set up with " "the appropriate software: " msgstr "" #: printer/printerdrake.pm:2426 #, c-format msgid "" "Either with the newer HPLIP which allows printer maintenance through the " "easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on " "newer PhotoSmart models " msgstr "" #: printer/printerdrake.pm:2427 #, c-format msgid "" "or with the older HPOJ which allows only scanner and memory card access, but " "could help you in case of failure of HPLIP. " msgstr "" #: printer/printerdrake.pm:2429 #, c-format msgid "What is your choice (choose \"None\" for non-HP printers)? " msgstr "" #: printer/printerdrake.pm:2430 printer/printerdrake.pm:2431 #: printer/printerdrake.pm:2457 printer/printerdrake.pm:2463 #: printer/printerdrake.pm:2489 #, c-format msgid "HPLIP" msgstr "HPLIP" #: printer/printerdrake.pm:2430 printer/printerdrake.pm:2433 #: printer/printerdrake.pm:2603 printer/printerdrake.pm:2609 #: printer/printerdrake.pm:2620 #, c-format msgid "HPOJ" msgstr "HPOJ" #: printer/printerdrake.pm:2438 #, c-format msgid "" "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony " "IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?" msgstr "" "Дали вашият принтер е многофункционално устройство от HP или Sony " "(OfficeJet, PSC, LaserJet 1100/1200/1220/3000/3200/3300/4345 със скенер, " "DeskJet 450, Sony IJP-V100), HP PhotoSmart или HP LaserJet 2200?" #: printer/printerdrake.pm:2457 printer/printerdrake.pm:2603 #, c-format msgid "Installing %s package..." msgstr "Инсталиране на %s пакети ..." #: printer/printerdrake.pm:2464 printer/printerdrake.pm:2610 #, c-format msgid "Only printing will be possible on the %s." msgstr "" #: printer/printerdrake.pm:2479 #, fuzzy, c-format msgid "Could not remove your old HPOJ configuration file %s for your %s! " msgstr "" "Не мога да създам конфигурационна директория на GNOME за всеки потребител \"%" "s\": %s\n" #: printer/printerdrake.pm:2481 #, c-format msgid "Please remove the file manually and restart HPOJ." msgstr "" #: printer/printerdrake.pm:2489 printer/printerdrake.pm:2620 #, c-format msgid "Checking device and configuring %s..." msgstr "Проверка на устройство и конфигурация за %s..." #: printer/printerdrake.pm:2510 #, fuzzy, c-format msgid "Which printer do you want to set up with HPLIP?" msgstr "На кой сектор искате да го преместите?" #: printer/printerdrake.pm:2551 printer/printerdrake.pm:2664 #, c-format msgid "Installing SANE packages..." msgstr "Инсталиране на SANE пакети ..." #: printer/printerdrake.pm:2564 printer/printerdrake.pm:2677 #, c-format msgid "Scanning on the %s will not be possible." msgstr "" #: printer/printerdrake.pm:2579 #, c-format msgid "Using and Maintaining your %s" msgstr "" #: printer/printerdrake.pm:2704 #, c-format msgid "Installing mtools packages..." msgstr "Инсталиране на mtools пакети..." #: printer/printerdrake.pm:2712 #, c-format msgid "Photo memory card access on the %s will not be possible." msgstr "" #: printer/printerdrake.pm:2728 #, c-format msgid "Scanning on your HP multi-function device" msgstr "Сканиране на вашето HP многофункционално устройство" #: printer/printerdrake.pm:2737 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "" #: printer/printerdrake.pm:2754 #, fuzzy, c-format msgid "Configuring device..." msgstr "Настройка ..." #: printer/printerdrake.pm:2791 #, c-format msgid "Making printer port available for CUPS..." msgstr "Прави порта на принтера наличен за CUPS..." #: printer/printerdrake.pm:2801 printer/printerdrake.pm:3075 #: printer/printerdrake.pm:3228 #, c-format msgid "Reading printer database..." msgstr "Четене на базата данни от принтери ..." #: printer/printerdrake.pm:3033 #, c-format msgid "Enter Printer Name and Comments" msgstr "Въведете име на принтер и коментар" #: printer/printerdrake.pm:3037 printer/printerdrake.pm:4360 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "Името на принтера трябва да съдържа само букви, числа и подчертавка" #: printer/printerdrake.pm:3043 printer/printerdrake.pm:4365 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" "Принтерът \"%s\" вече съществува,\n" "наистина ли искате да презапишете настройката ?" #: printer/printerdrake.pm:3050 #, c-format msgid "" "The printer name \"%s\" has more than 12 characters which can make the " "printer unaccessible from Windows clients. Do you really want to use this " "name?" msgstr "" #: printer/printerdrake.pm:3059 #, c-format msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" "Всеки принтер се нуждае от име (например \"printer\"). Полетата Описание и " "Местоположе не трябва да бъдат попълвани. Има коментари за потребителите." #: printer/printerdrake.pm:3060 #, c-format msgid "Name of printer" msgstr "Име на принтер" #: printer/printerdrake.pm:3061 standalone/drakconnect:592 #: standalone/harddrake2:39 standalone/printerdrake:224 #: standalone/printerdrake:231 #, c-format msgid "Description" msgstr "Описание" #: printer/printerdrake.pm:3062 standalone/printerdrake:224 #: standalone/printerdrake:231 #, c-format msgid "Location" msgstr "Местоположение" #: printer/printerdrake.pm:3080 #, c-format msgid "Preparing printer database..." msgstr "Подготвяне на базата данни от принтери ..." #: printer/printerdrake.pm:3206 #, c-format msgid "Your printer model" msgstr "Вашият модел принтер" #: printer/printerdrake.pm:3207 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" #: printer/printerdrake.pm:3212 printer/printerdrake.pm:3215 #, c-format msgid "The model is correct" msgstr "Този модел е правилен" #: printer/printerdrake.pm:3213 printer/printerdrake.pm:3214 #: printer/printerdrake.pm:3217 #, c-format msgid "Select model manually" msgstr "Избор на модел ръчно" #: printer/printerdrake.pm:3241 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Find the correct model in the list when a wrong model or " "\"Raw printer\" is highlighted." msgstr "" #: printer/printerdrake.pm:3260 #, c-format msgid "Install a manufacturer-supplied PPD file" msgstr "" #: printer/printerdrake.pm:3292 #, c-format msgid "" "Every PostScript printer is delivered with a PPD file which describes the " "printer's options and features." msgstr "" #: printer/printerdrake.pm:3293 #, c-format msgid "" "This file is usually somewhere on the CD with the Windows and Mac drivers " "delivered with the printer." msgstr "" #: printer/printerdrake.pm:3294 #, c-format msgid "You can find the PPD files also on the manufacturer's web sites." msgstr "" #: printer/printerdrake.pm:3295 #, c-format msgid "" "If you have Windows installed on your machine, you can find the PPD file on " "your Windows partition, too." msgstr "" #: printer/printerdrake.pm:3296 #, c-format msgid "" "Installing the printer's PPD file and using it when setting up the printer " "makes all options of the printer available which are provided by the " "printer's hardware" msgstr "" #: printer/printerdrake.pm:3297 #, c-format msgid "" "Here you can choose the PPD file to be installed on your machine, it will " "then be used for the setup of your printer." msgstr "" #: printer/printerdrake.pm:3299 #, fuzzy, c-format msgid "Install PPD file from" msgstr "Инсталира rpm" #: printer/printerdrake.pm:3302 printer/printerdrake.pm:3310 #: standalone/scannerdrake:183 standalone/scannerdrake:192 #: standalone/scannerdrake:242 standalone/scannerdrake:250 #, fuzzy, c-format msgid "Floppy Disk" msgstr "Флопи" #: printer/printerdrake.pm:3303 printer/printerdrake.pm:3312 #: standalone/scannerdrake:184 standalone/scannerdrake:194 #: standalone/scannerdrake:243 standalone/scannerdrake:252 #, fuzzy, c-format msgid "Other place" msgstr "Други портовете" #: printer/printerdrake.pm:3318 #, fuzzy, c-format msgid "Select PPD file" msgstr "Изберете файл" #: printer/printerdrake.pm:3322 #, c-format msgid "The PPD file %s does not exist or is unreadable!" msgstr "" #: printer/printerdrake.pm:3328 #, c-format msgid "The PPD file %s does not conform with the PPD specifications!" msgstr "" #: printer/printerdrake.pm:3339 #, fuzzy, c-format msgid "Installing PPD file..." msgstr "Инсталира %s ..." #: printer/printerdrake.pm:3457 #, c-format msgid "OKI winprinter configuration" msgstr "Настройки на OKI Winprinter" #: printer/printerdrake.pm:3458 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" #: printer/printerdrake.pm:3483 printer/printerdrake.pm:3513 #, c-format msgid "Lexmark inkjet configuration" msgstr "Настройка на Lexmark inkjet" #: printer/printerdrake.pm:3484 #, c-format msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" "Inkjet принтерните драйвери предоставени от Lexmark поддържат само локални " "принтери, без принтери на отдалечени машини или принтерни машини. Моля, " "свържете принтера си на локален порт или го настройте на машината, към която " "е свързан." #: printer/printerdrake.pm:3514 #, c-format msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" #: printer/printerdrake.pm:3524 #, fuzzy, c-format msgid "Lexmark X125 configuration" msgstr "Настройка на Lexmark inkjet" #: printer/printerdrake.pm:3525 #, fuzzy, c-format msgid "" "The driver for this printer only supports printers locally connected via " "USB, no printers on remote machines or print server boxes. Please connect " "your printer to a local USB port or configure it on the machine where it is " "connected to." msgstr "" "Inkjet принтерните драйвери предоставени от Lexmark поддържат само локални " "принтери, без принтери на отдалечени машини или принтерни машини. Моля, " "свържете принтера си на локален порт или го настройте на машината, към която " "е свързан." #: printer/printerdrake.pm:3547 #, fuzzy, c-format msgid "Samsung ML/QL-85G configuration" msgstr "Настройка за звук" #: printer/printerdrake.pm:3548 printer/printerdrake.pm:3575 #, fuzzy, c-format msgid "" "The driver for this printer only supports printers locally connected on the " "first parallel port, no printers on remote machines or print server boxes or " "on other parallel ports. Please connect your printer to the first parallel " "port or configure it on the machine where it is connected to." msgstr "" "Inkjet принтерните драйвери предоставени от Lexmark поддържат само локални " "принтери, без принтери на отдалечени машини или принтерни машини. Моля, " "свържете принтера си на локален порт или го настройте на машината, към която " "е свързан." #: printer/printerdrake.pm:3574 #, fuzzy, c-format msgid "Canon LBP-460/660 configuration" msgstr "Ръчна настройка" #: printer/printerdrake.pm:3601 #, fuzzy, c-format msgid "Canon LBP-810/1120 (CAPT) configuration" msgstr "Ръчна настройка" #: printer/printerdrake.pm:3602 #, fuzzy, c-format msgid "" "The driver for this printer only supports printers locally connected via " "USB, no printers on remote machines or print server boxes or on the parallel " "port. Please connect your printer to the USB or configure it on the machine " "where it is directly connected to." msgstr "" "Inkjet принтерните драйвери предоставени от Lexmark поддържат само локални " "принтери, без принтери на отдалечени машини или принтерни машини. Моля, " "свържете принтера си на локален порт или го настройте на машината, към която " "е свързан." #: printer/printerdrake.pm:3609 #, c-format msgid "Firmware-Upload for HP LaserJet 1000" msgstr "" #: printer/printerdrake.pm:3759 #, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" "Настройки на принтера по подразбиране\n" "\n" "Трябва да сте сигурни, че големината на страницата\n" "и типа на мастилото (ако има) са настроени правилно.\n" "Отбележете, че при много високо качесто на изхода на\n" "принтера, той може значително да се забави." #: printer/printerdrake.pm:3884 #, c-format msgid "Printer default settings" msgstr "Настройки по подразбиране за принтера" #: printer/printerdrake.pm:3891 #, c-format msgid "Option %s must be an integer number!" msgstr "Настройката %s трябва да е цяло число !" #: printer/printerdrake.pm:3895 #, c-format msgid "Option %s must be a number!" msgstr "Настройката %s трябва да е число !" #: printer/printerdrake.pm:3899 #, c-format msgid "Option %s out of range!" msgstr "Опцията %s е извън границите !" #: printer/printerdrake.pm:3951 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" "Искате ли да настроите този принтер (\"%s\")\n" "като принтер по подразбиране ?" #: printer/printerdrake.pm:3967 #, c-format msgid "Test pages" msgstr "Тестови страници" #: printer/printerdrake.pm:3968 #, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" "Моля, изберете тестова страница за печат.\n" "Забележка: тестовата страница за снимка може да отнеме доста дълго\n" "време да се изпечата и на лазерни принтери с малко памет може въобще\n" "да не излезе. В повечето случаи е достатъчна стандартна тестова страница." #: printer/printerdrake.pm:3972 #, c-format msgid "No test pages" msgstr "Без тестови страници" #: printer/printerdrake.pm:3973 #, c-format msgid "Print" msgstr "Печат" #: printer/printerdrake.pm:3998 #, c-format msgid "Standard test page" msgstr "Стандартна тестова страница" #: printer/printerdrake.pm:4001 #, c-format msgid "Alternative test page (Letter)" msgstr "Алтернативна тестова страница (Писмо)" #: printer/printerdrake.pm:4004 #, c-format msgid "Alternative test page (A4)" msgstr "Алтернативна тестова страница (А4)" #: printer/printerdrake.pm:4006 #, c-format msgid "Photo test page" msgstr "Тестова страница със снимка" #: printer/printerdrake.pm:4019 printer/printerdrake.pm:4203 #, c-format msgid "Printing test page(s)..." msgstr "Отпечатване на тестов(ата/ите) страниц(а/и) ..." #: printer/printerdrake.pm:4039 #, fuzzy, c-format msgid "Skipping photo test page." msgstr "Тестова страница със снимка" #: printer/printerdrake.pm:4056 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "Тестовите страници са изпратени към принтера.\n" "Може да отнеме малко време преди принтера да започне.\n" "Състояние на печата:\n" "%s\n" "\n" #: printer/printerdrake.pm:4060 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" "Тестовите страници са изпратени към принтерна.\n" "Може да отнеме малко време преди принтера да започне.\n" #: printer/printerdrake.pm:4070 #, c-format msgid "Did it work properly?" msgstr "Проработи ли както трябва ?" #: printer/printerdrake.pm:4094 printer/printerdrake.pm:5496 #, c-format msgid "Raw printer" msgstr "Raw принтер" #: printer/printerdrake.pm:4132 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" "За да изпечатате файл от командния ред (терминален прозорец), можете или да " "използвате командата \"%s \" или графичния печатащ инструмент: \"xpp " "\" или \"kprinter \". Графичните инструменти ви позволяват да " "избирате принтера и да поправяте лесно настройките на опциите.\n" #: printer/printerdrake.pm:4134 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "Можете да използвате тази команда и в полето \"Команда за печат\" на " "печатните диалози в мноѓо приложения. Но тўк не поставяйте името на файла, " "защото то се подава от приложението.\n" #: printer/printerdrake.pm:4137 printer/printerdrake.pm:4154 #: printer/printerdrake.pm:4164 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" "\n" "Командата \"%s\" също така ви позволява да поправите настройките на опциите " "за определена работа на принтера. Просто добавете целаните настройки към " "командния ред, напр. \"%s \". " #: printer/printerdrake.pm:4140 printer/printerdrake.pm:4180 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s%s\n" "\n" msgstr "" "За да видите списък на достъпните опции за текущия принтер, или прочетете " "списъка показан по-долу или цъкнете на бутона \"Списък с опции за печат\". %s" "%s%s\n" #: printer/printerdrake.pm:4144 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" "Това е списък от налични за печат опции отнасящи се за текущият принтер:\n" "\n" #: printer/printerdrake.pm:4149 printer/printerdrake.pm:4159 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" "За да отпечатате файл от командния ред (терминален прозорец) използвайте " "командата \"%s \".\n" #: printer/printerdrake.pm:4151 printer/printerdrake.pm:4161 #: printer/printerdrake.pm:4171 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "Можете да използвате тази команда и в полето \"Команда за печат\" на " "печатните диалози в много приложения. Но тук не поставяйте името на файла, " "защото то се подава от приложението.\n" #: printer/printerdrake.pm:4156 printer/printerdrake.pm:4166 #, c-format msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" "За да видите списък с достъпните опции за текущия принтер, цъкнете на бутона " "\"Списък с опции за печат\"." #: printer/printerdrake.pm:4169 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" "За да отпечатате файл от командния ред (терминален прозорец), използвайте " "командата \"%s \" или \"%s \".\n" #: printer/printerdrake.pm:4173 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" #: printer/printerdrake.pm:4177 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" "\n" "Командите \"%s\" и \"%s\" също така позволяват да поправяте избраните " "настройки за определена работа на принтера. Просто добавете исканите " "настройки към командния ред, напр. \"%s \".\n" #: printer/printerdrake.pm:4187 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "Печатане/Сканиране/Фото картички на принтер \"%s\"" #: printer/printerdrake.pm:4188 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "Печатан/Сканиранее на \"%s\"" #: printer/printerdrake.pm:4190 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "Печатане/Фото картен достъп на \"%s\"" #: printer/printerdrake.pm:4192 #, fuzzy, c-format msgid "Using/Maintaining the printer \"%s\"" msgstr "Печатане на принтер \"%s\"" #: printer/printerdrake.pm:4193 #, c-format msgid "Printing on the printer \"%s\"" msgstr "Печатане на принтер \"%s\"" #: printer/printerdrake.pm:4199 #, c-format msgid "Print option list" msgstr "Списък с принтерни опции" #: printer/printerdrake.pm:4221 #, c-format msgid "" "Your %s is set up with HP's HPLIP driver software. This way many special " "features of your printer are supported.\n" "\n" msgstr "" #: printer/printerdrake.pm:4224 #, c-format msgid "" "The scanner in your printer can be used with the usual SANE software, for " "example Kooka or XSane (Both in the Multimedia/Graphics menu). " msgstr "" #: printer/printerdrake.pm:4225 #, c-format msgid "" "Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to " "share your scanner on the network.\n" "\n" msgstr "" #: printer/printerdrake.pm:4229 #, c-format msgid "" "The memory card readers in your printer can be accessed like a usual USB " "mass storage device. " msgstr "" #: printer/printerdrake.pm:4230 #, c-format msgid "" "After inserting a card a hard disk icon to access the card should appear on " "your desktop.\n" "\n" msgstr "" #: printer/printerdrake.pm:4232 #, c-format msgid "" "The memory card readers in your printer can be accessed using HP's Printer " "Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access " "Photo Cards...\" button on the \"Functions\" tab. " msgstr "" #: printer/printerdrake.pm:4233 #, c-format msgid "" "Note that this is very slow, reading the pictures from the camera or a USB " "card reader is usually faster.\n" "\n" msgstr "" #: printer/printerdrake.pm:4236 #, c-format msgid "" "HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a " "lot of status monitoring and maintenance functions for your %s:\n" "\n" msgstr "" #: printer/printerdrake.pm:4237 #, c-format msgid " - Ink level/status info\n" msgstr "" #: printer/printerdrake.pm:4238 #, c-format msgid " - Ink nozzle cleaning\n" msgstr "" #: printer/printerdrake.pm:4239 #, fuzzy, c-format msgid " - Print head alignment\n" msgstr "Хоризонтално подравняване:" #: printer/printerdrake.pm:4240 #, fuzzy, c-format msgid " - Color calibration\n" msgstr "Конфигурация на цвят" #: printer/printerdrake.pm:4255 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "You do not need to run \"scannerdrake\" for setting up scanning on this " "device, you only need to use \"scannerdrake\" if you want to share the " "scanner on the network." msgstr "" #: printer/printerdrake.pm:4281 #, c-format msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" #: printer/printerdrake.pm:4324 printer/printerdrake.pm:4351 #: printer/printerdrake.pm:4386 #, c-format msgid "Transfer printer configuration" msgstr "Пренос на настройка на принтер" #: printer/printerdrake.pm:4325 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" "Можете да копирате настройките на принтера, които сте извършили за spoller %" "s на %s, текущия spooler. Цялата информация за настройките (име не принтер, " "описание, местоположение, вид на връзката и настройки по подразбиране) се " "презаписват, но работите не се прехвърлят.\n" "Не всички опашки могат да бъдат прехвърлени по следните причини:\n" #: printer/printerdrake.pm:4328 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" "CUPS не поддържа принтери на Novell сървъри или принтери изпращащи данни във " "свободно-изградена команда.\n" #: printer/printerdrake.pm:4330 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" "PDQ поддържа само локални принтери, отдалечени LPD принтери и Socket/TCP " "принтери.\n" #: printer/printerdrake.pm:4332 #, c-format msgid "LPD and LPRng do not support IPP printers.\n" msgstr "LPD и LPRng не поддържа IPP принтери.\n" #: printer/printerdrake.pm:4334 #, c-format msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" "Като допълнение, опашките не създадени с тази програма или \"foomatic-" "configure\" не могат да бъдат прехвърляни." #: printer/printerdrake.pm:4335 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" "\n" "Също така, принтери настроени с PPD файлове предоставени от производителите " "им или с оригинални CUPS драйвери не могат да бъдат прехвърляни." #: printer/printerdrake.pm:4336 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" "\n" "Отбележете принтерите, които искате да прехвърлите и цъкнете\n" "\"Прехвърли\"." #: printer/printerdrake.pm:4339 #, c-format msgid "Do not transfer printers" msgstr "Не прехвърляй принтери" #: printer/printerdrake.pm:4340 printer/printerdrake.pm:4356 #, c-format msgid "Transfer" msgstr "Прехвърли" #: printer/printerdrake.pm:4352 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" "Принтер с име \"%s\" вече съществува в %s.\n" "Цъкнете \"Прехвърли\", за да го презапишете.\n" "Можете също така да напишете ново име или да пропуснте принтера." #: printer/printerdrake.pm:4373 #, c-format msgid "New printer name" msgstr "Ново име на принтер" #: printer/printerdrake.pm:4376 #, c-format msgid "Transferring %s..." msgstr "Прехвърляне на %s ..." #: printer/printerdrake.pm:4387 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" "Прехвърлили сте принтер по подразбиране (\"%s\"), Искате ли да го оставите " "по подразбиране в новата принтерна система %s ?" #: printer/printerdrake.pm:4397 #, c-format msgid "Refreshing printer data..." msgstr "Опресняване на данните от принтера ..." #: printer/printerdrake.pm:4407 #, c-format msgid "Starting network..." msgstr "Стартиране мрежата ...." #: printer/printerdrake.pm:4451 printer/printerdrake.pm:4455 #: printer/printerdrake.pm:4457 #, c-format msgid "Configure the network now" msgstr "В момента настройвам мрежата" #: printer/printerdrake.pm:4452 #, c-format msgid "Network functionality not configured" msgstr "Функционалността на мрежата не е настроена" #: printer/printerdrake.pm:4453 #, c-format msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" #: printer/printerdrake.pm:4456 #, c-format msgid "Go on without configuring the network" msgstr "Продължи без настойка на мрежата" #: printer/printerdrake.pm:4487 #, c-format msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network is accessible after booting your " "system and correct the configuration using the %s Control Center, section " "\"Network & Internet\"/\"Connection\", and afterwards set up the printer, " "also using the %s Control Center, section \"Hardware\"/\"Printer\"" msgstr "" #: printer/printerdrake.pm:4488 #, c-format msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" "Нямаше достъп до мрежата и такъв не можеше да бъде установен. Моля, " "проверете настройката и хардуера си. Тогава опитайте да настроите " "отдалечения принтер отново." #: printer/printerdrake.pm:4498 #, c-format msgid "Restarting printing system..." msgstr "Рестартиране на принтерната система" #: printer/printerdrake.pm:4529 #, c-format msgid "high" msgstr "високо" #: printer/printerdrake.pm:4529 #, c-format msgid "paranoid" msgstr "параноично" #: printer/printerdrake.pm:4531 #, c-format msgid "Installing a printing system in the %s security level" msgstr "Инсталиране на принтерната система в %s ниво на сигурност" #: printer/printerdrake.pm:4532 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessible by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" #: printer/printerdrake.pm:4568 #, c-format msgid "Starting the printing system at boot time" msgstr "Стартиране на принтерната система при стартиране" #: printer/printerdrake.pm:4569 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" #: printer/printerdrake.pm:4592 #, c-format msgid "Checking installed software..." msgstr "Проверка на инсталирания софтуер..." #: printer/printerdrake.pm:4598 #, c-format msgid "Removing %s..." msgstr "Изтриване на %s ..." #: printer/printerdrake.pm:4602 #, fuzzy, c-format msgid "Could not remove the %s printing system!" msgstr "Промяна системата за печат" #: printer/printerdrake.pm:4626 #, c-format msgid "Installing %s..." msgstr "Инсталира %s ..." #: printer/printerdrake.pm:4630 #, fuzzy, c-format msgid "Could not install the %s printing system!" msgstr "Промяна системата за печат" #: printer/printerdrake.pm:4698 #, c-format msgid "" "In this mode there is no local printing system, all printing requests go " "directly to the server specified below. Note that it is not possible to " "define local print queues then and if the specified server is down it cannot " "be printed at all from this machine." msgstr "" #: printer/printerdrake.pm:4700 #, c-format msgid "" "Enter the host name or IP of your CUPS server and click OK if you want to " "use this mode, click \"Quit\" otherwise." msgstr "" #: printer/printerdrake.pm:4714 #, fuzzy, c-format msgid "Name or IP of remote server:" msgstr "Принтер на отдалечен LPD сървър" #: printer/printerdrake.pm:4734 #, c-format msgid "Setting Default Printer..." msgstr "Настройка на принтер по подразбиране..." #: printer/printerdrake.pm:4754 #, fuzzy, c-format msgid "Local CUPS printing system or remote CUPS server?" msgstr "Принтер на отдалечен CUPS сървър" #: printer/printerdrake.pm:4755 #, c-format msgid "The CUPS printing system can be used in two ways: " msgstr "" #: printer/printerdrake.pm:4757 #, c-format msgid "1. The CUPS printing system can run locally. " msgstr "" #: printer/printerdrake.pm:4758 #, c-format msgid "" "Then locally connected printers can be used and remote printers on other " "CUPS servers in the same network are automatically discovered. " msgstr "" #: printer/printerdrake.pm:4759 #, c-format msgid "" "Disadvantage of this approach is, that more resources on the local machine " "are needed: Additional software packages need to be installed, the CUPS " "daemon has to run in the background and needs some memory, and the IPP port " "(port 631) is opened. " msgstr "" #: printer/printerdrake.pm:4761 #, c-format msgid "2. All printing requests are immediately sent to a remote CUPS server. " msgstr "" #: printer/printerdrake.pm:4762 #, c-format msgid "" "Here local resource occupation is reduced to a minimum. No CUPS daemon is " "started or port opened, no software infrastructure for setting up local " "print queues is installed, so less memory and disk space is used. " msgstr "" #: printer/printerdrake.pm:4763 #, c-format msgid "" "Disadvantage is that it is not possible to define local printers then and if " "the specified server is down it cannot be printed at all from this machine. " msgstr "" #: printer/printerdrake.pm:4765 #, c-format msgid "How should CUPS be set up on your machine?" msgstr "" #: printer/printerdrake.pm:4769 printer/printerdrake.pm:4784 #: printer/printerdrake.pm:4788 printer/printerdrake.pm:4794 #, c-format msgid "Remote server, specify Name or IP here:" msgstr "" #: printer/printerdrake.pm:4783 #, fuzzy, c-format msgid "Local CUPS printing system" msgstr "Промяна системата за печат" #: printer/printerdrake.pm:4822 #, c-format msgid "Select Printer Spooler" msgstr "Изберете принтерен spooler" #: printer/printerdrake.pm:4823 #, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "Коя принтерна система (spooler) изкате да използвате ?" #: printer/printerdrake.pm:4872 #, c-format msgid "Failed to configure printer \"%s\"!" msgstr "ННеуспешна настройка на принтер \"%s\"!" #: printer/printerdrake.pm:4887 #, c-format msgid "Installing Foomatic..." msgstr "Инсталиране на Foomatic..." #: printer/printerdrake.pm:4893 #, c-format msgid "Could not install %s packages, %s cannot be started!" msgstr "" #: printer/printerdrake.pm:5088 #, fuzzy, c-format msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it. " msgstr "" "Следните принтери са настроени. Цъкнете на един от тях, за да го редактирате " "или за да получите информация за него." #: printer/printerdrake.pm:5118 #, c-format msgid "Display all available remote CUPS printers" msgstr "" #: printer/printerdrake.pm:5119 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" "Опресняване на списъка с принтери ( за да покаже и всички отдалечени CUPS " "принтери)" #: printer/printerdrake.pm:5130 #, c-format msgid "CUPS configuration" msgstr "CUPS конфигурация" #: printer/printerdrake.pm:5151 #, c-format msgid "Change the printing system" msgstr "Промяна системата за печат" #: printer/printerdrake.pm:5160 #, c-format msgid "Normal Mode" msgstr "Нормален режим" #: printer/printerdrake.pm:5161 #, c-format msgid "Expert Mode" msgstr "Разширени функиции" #: printer/printerdrake.pm:5439 printer/printerdrake.pm:5497 #: printer/printerdrake.pm:5583 printer/printerdrake.pm:5592 #, c-format msgid "Printer options" msgstr "Опции на принтера" #: printer/printerdrake.pm:5475 #, c-format msgid "Modify printer configuration" msgstr "Поправи настройките на принтер" #: printer/printerdrake.pm:5477 #, c-format msgid "" "Printer %s%s\n" "What do you want to modify on this printer?" msgstr "" "Принтер %s%s\n" "Какво искате да поправите по този принтер ?" #: printer/printerdrake.pm:5482 #, fuzzy, c-format msgid "This printer is disabled" msgstr "Големината на дяла не може да бъде променена" #: printer/printerdrake.pm:5484 #, c-format msgid "Do it!" msgstr "Направи го!" #: printer/printerdrake.pm:5489 printer/printerdrake.pm:5551 #, c-format msgid "Printer connection type" msgstr "Тип на връзката към принтера" #: printer/printerdrake.pm:5490 printer/printerdrake.pm:5557 #, c-format msgid "Printer name, description, location" msgstr "Име на принтера, описание, местоположение" #: printer/printerdrake.pm:5492 printer/printerdrake.pm:5576 #, c-format msgid "Printer manufacturer, model, driver" msgstr "Производител на принтера, модел, драйвер" #: printer/printerdrake.pm:5493 printer/printerdrake.pm:5577 #, c-format msgid "Printer manufacturer, model" msgstr "Производител на принтера, модел" #: printer/printerdrake.pm:5499 printer/printerdrake.pm:5587 #, c-format msgid "Set this printer as the default" msgstr "Определи този принтер за ползване по подразбиране" #: printer/printerdrake.pm:5504 printer/printerdrake.pm:5593 #: printer/printerdrake.pm:5595 printer/printerdrake.pm:5604 #, fuzzy, c-format msgid "Enable Printer" msgstr "Включва Сървър" #: printer/printerdrake.pm:5507 printer/printerdrake.pm:5598 #: printer/printerdrake.pm:5599 printer/printerdrake.pm:5601 #, fuzzy, c-format msgid "Disable Printer" msgstr "Изключва Сървър" #: printer/printerdrake.pm:5511 printer/printerdrake.pm:5605 #, fuzzy, c-format msgid "Printer communication error handling" msgstr "Тип на връзката към принтера" #: printer/printerdrake.pm:5512 printer/printerdrake.pm:5609 #, c-format msgid "Print test pages" msgstr "Отпечатване на тестови страници" #: printer/printerdrake.pm:5513 printer/printerdrake.pm:5611 #, c-format msgid "Learn how to use this printer" msgstr "Научете как да изпозлвате този принтер" #: printer/printerdrake.pm:5514 printer/printerdrake.pm:5613 #, c-format msgid "Remove printer" msgstr "Премахване на принтера" #: printer/printerdrake.pm:5565 #, c-format msgid "Removing old printer \"%s\"..." msgstr "Изтриване на стар принтер \"%s\"..." #: printer/printerdrake.pm:5596 #, fuzzy, c-format msgid "Printer \"%s\" is now enabled." msgstr "Принтер \"%s\" на сървър \"%s\"" #: printer/printerdrake.pm:5602 #, fuzzy, c-format msgid "Printer \"%s\" is now disabled." msgstr "Споделянето на Интернет връзката в момента е изключено." #: printer/printerdrake.pm:5644 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "Наистина ли искате да премахнете принтера \"%s\" ?" #: printer/printerdrake.pm:5648 #, c-format msgid "Removing printer \"%s\"..." msgstr "Изтриване на принтер \"%s\"..." #: printer/printerdrake.pm:5672 #, c-format msgid "Default printer" msgstr "Принтер по подразбиране" #: printer/printerdrake.pm:5673 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "Принтерът \"%s\" вече е определен за ползване по подразбиране." #: raid.pm:41 #, fuzzy, c-format msgid "Can not add a partition to _formatted_ RAID %s" msgstr "Не мога да прибавя дял към _форматиран_ RAID md%d" #: raid.pm:145 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "Няма достатъчно дялове за RAID ниво %d\n" #: scanner.pm:96 #, c-format msgid "Could not create directory /usr/share/sane/firmware!" msgstr "" #: scanner.pm:107 #, c-format msgid "Could not create link /usr/share/sane/%s!" msgstr "" #: scanner.pm:114 #, c-format msgid "Could not copy firmware file %s to /usr/share/sane/firmware!" msgstr "" #: scanner.pm:121 #, c-format msgid "Could not set permissions of firmware file %s!" msgstr "" #: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70 #: standalone/scannerdrake:78 standalone/scannerdrake:346 #: standalone/scannerdrake:382 standalone/scannerdrake:446 #: standalone/scannerdrake:490 standalone/scannerdrake:494 #: standalone/scannerdrake:516 standalone/scannerdrake:581 #, c-format msgid "Scannerdrake" msgstr "Скенердрейк" #: scanner.pm:201 standalone/scannerdrake:947 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "" #: scanner.pm:202 #, c-format msgid "Your scanner(s) will not be available for non-root users." msgstr "" #: security/help.pm:11 #, c-format msgid "Accept/Refuse bogus IPv4 error messages." msgstr "Позволява/Забранява съобщения за IPv4 грешки." #: security/help.pm:13 #, c-format msgid " Accept/Refuse broadcasted icmp echo." msgstr "Позволява/Забранява broadcasted icmp echo." #: security/help.pm:15 #, c-format msgid " Accept/Refuse icmp echo." msgstr "Позволява/Забранява icmp echo." #: security/help.pm:17 #, c-format msgid "Allow/Forbid autologin." msgstr "Позволява/Забранява автоматично влизане." #. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is #: security/help.pm:21 #, c-format msgid "" "If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" "If set to NONE, no issues are allowed.\n" "\n" "Else only /etc/issue is allowed." msgstr "" #: security/help.pm:27 #, c-format msgid "Allow/Forbid reboot by the console user." msgstr "Позволява/Забранява престартиране от потребител на конзола." #: security/help.pm:29 #, c-format msgid "Allow/Forbid remote root login." msgstr "Позволява/Забранява отдалечено влизане на root." #: security/help.pm:31 #, c-format msgid "Allow/Forbid direct root login." msgstr "Позволява/Забранява директно влизане на root." #: security/help.pm:33 #, c-format msgid "" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." msgstr "" #: security/help.pm:35 #, c-format msgid "" "Allow/forbid to export display when\n" "passing from the root account to the other users.\n" "\n" "See pam_xauth(8) for more details.'" msgstr "" #: security/help.pm:40 #, c-format msgid "" "Allow/Forbid X connections:\n" "\n" "- ALL (all connections are allowed),\n" "\n" "- LOCAL (only connection from local machine),\n" "\n" "- NONE (no connection)." msgstr "" #: security/help.pm:48 #, c-format msgid "" "The argument specifies if clients are authorized to connect\n" "to the X server from the network on the tcp port 6000 or not." msgstr "" #. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're #: security/help.pm:53 #, c-format msgid "" "Authorize:\n" "\n" "- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " "set to \"ALL\",\n" "\n" "- only local ones if set to \"LOCAL\"\n" "\n" "- none if set to \"NONE\".\n" "\n" "To authorize the services you need, use /etc/hosts.allow (see hosts.allow" "(5))." msgstr "" #: security/help.pm:63 #, c-format msgid "" "If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" "is greater than 3 in /etc/security/msec/security.conf, creates the\n" "symlink /etc/security/msec/server to point to\n" "/etc/security/msec/server..\n" "\n" "The /etc/security/msec/server is used by chkconfig --add to decide to\n" "add a service if it is present in the file during the installation of\n" "packages." msgstr "" #: security/help.pm:72 #, c-format msgid "" "Enable/Disable crontab and at for users.\n" "\n" "Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" "and crontab(1))." msgstr "" #: security/help.pm:77 #, c-format msgid "Enable/Disable syslog reports to console 12" msgstr "" #: security/help.pm:79 #, c-format msgid "" "Enable/Disable name resolution spoofing protection. If\n" "\"%s\" is true, also reports to syslog." msgstr "" #: security/help.pm:80 standalone/draksec:215 #, c-format msgid "Security Alerts:" msgstr "Предупреждения за защита:" #: security/help.pm:82 #, c-format msgid "Enable/Disable IP spoofing protection." msgstr "Разрешава/Забранява защитата от IP spoofing." #: security/help.pm:84 #, c-format msgid "Enable/Disable libsafe if libsafe is found on the system." msgstr "" #: security/help.pm:86 #, c-format msgid "Enable/Disable the logging of IPv4 strange packets." msgstr "" #: security/help.pm:88 #, c-format msgid "Enable/Disable msec hourly security check." msgstr "Разрешава/Забранява ежечасова проверка на сигурността" #: security/help.pm:90 #, c-format msgid "" " Enabling su only from members of the wheel group or allow su from any user." msgstr "" #: security/help.pm:92 #, c-format msgid "Use password to authenticate users." msgstr "" #: security/help.pm:94 #, c-format msgid "Activate/Disable ethernet cards promiscuity check." msgstr "" #: security/help.pm:96 #, c-format msgid " Activate/Disable daily security check." msgstr "Разрешава/Забранява ежедневна проверка за защита" #: security/help.pm:98 #, c-format msgid " Enable/Disable sulogin(8) in single user level." msgstr "" #: security/help.pm:100 #, c-format msgid "Add the name as an exception to the handling of password aging by msec." msgstr "" #: security/help.pm:102 #, c-format msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." msgstr "" #: security/help.pm:104 #, c-format msgid "Set the password history length to prevent password reuse." msgstr "" #: security/help.pm:106 #, c-format msgid "" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "" "Задава паролата минималната дължина на паролата, минимален брой цифри и " "минимален брой главни букви." #: security/help.pm:108 #, c-format msgid "Set the root umask." msgstr "Установяване на root umask." #: security/help.pm:109 #, c-format msgid "if set to yes, check open ports." msgstr "ако е зададено да, проверява отворените портове" #: security/help.pm:110 #, c-format msgid "" "if set to yes, check for:\n" "\n" "- empty passwords,\n" "\n" "- no password in /etc/shadow\n" "\n" "- for users with the 0 id other than root." msgstr "" "ако е включено,проверява :\n" "\n" "- за празни пароли,\n" "\n" "- дали няма пароли в /etc/shadow\n" "- за потребители различни от root" #: security/help.pm:117 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" #: security/help.pm:118 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "" #: security/help.pm:119 #, c-format msgid "if set to yes, run the daily security checks." msgstr "" #: security/help.pm:120 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "" #: security/help.pm:121 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "" #: security/help.pm:122 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "" #: security/help.pm:123 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "ако е включено,проверява добавянето/премахването на suid root файлове" #: security/help.pm:124 #, c-format msgid "if set to yes, report unowned files." msgstr "" #: security/help.pm:125 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "" "ако е задаено да, проверява файловете/директориите достъпни за писане от " "всеки." #: security/help.pm:126 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "" #: security/help.pm:127 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" #: security/help.pm:128 #, c-format msgid "if set to yes, report check result by mail." msgstr "ако е задаено да, изпраща по пощата съобщение за резултата." #: security/help.pm:129 #, c-format msgid "Do not send mails if there's nothing to warn about" msgstr "" #: security/help.pm:130 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "" #: security/help.pm:131 #, c-format msgid "if set to yes, report check result to syslog." msgstr "" #: security/help.pm:132 #, c-format msgid "if set to yes, reports check result to tty." msgstr "ако е задаено да, изпраща резултата от проверката на tty." #: security/help.pm:134 #, c-format msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "" #: security/help.pm:136 #, c-format msgid "Set the shell timeout. A value of zero means no timeout." msgstr "" #: security/help.pm:136 #, c-format msgid "Timeout unit is second" msgstr "" #: security/help.pm:138 #, c-format msgid "Set the user umask." msgstr "Установяване на потребителска umask" #: security/l10n.pm:11 #, c-format msgid "Accept bogus IPv4 error messages" msgstr "Приема съобщения за IPv4 грешки." #: security/l10n.pm:12 #, c-format msgid "Accept broadcasted icmp echo" msgstr "Приема broadcast-нато icmp echo" #: security/l10n.pm:13 #, c-format msgid "Accept icmp echo" msgstr "" #: security/l10n.pm:15 #, c-format msgid "/etc/issue* exist" msgstr "" #: security/l10n.pm:16 #, c-format msgid "Reboot by the console user" msgstr "" #: security/l10n.pm:17 #, c-format msgid "Allow remote root login" msgstr "Позволява отдалечено влизане на root." #: security/l10n.pm:18 #, c-format msgid "Direct root login" msgstr "" #: security/l10n.pm:19 #, c-format msgid "List users on display managers (kdm and gdm)" msgstr "" #: security/l10n.pm:20 #, c-format msgid "Export display when passing from root to the other users" msgstr "" #: security/l10n.pm:21 #, c-format msgid "Allow X Window connections" msgstr "Позволява X Window връзки" #: security/l10n.pm:22 #, c-format msgid "Authorize TCP connections to X Window" msgstr "" #: security/l10n.pm:23 #, c-format msgid "Authorize all services controlled by tcp_wrappers" msgstr "" #: security/l10n.pm:24 #, c-format msgid "Chkconfig obey msec rules" msgstr "Chkconfig спазва msec правилата" #: security/l10n.pm:25 #, c-format msgid "Enable \"crontab\" and \"at\" for users" msgstr "" #: security/l10n.pm:26 #, c-format msgid "Syslog reports to console 12" msgstr "" #: security/l10n.pm:27 #, c-format msgid "Name resolution spoofing protection" msgstr "" #: security/l10n.pm:28 #, c-format msgid "Enable IP spoofing protection" msgstr "" #: security/l10n.pm:29 #, c-format msgid "Enable libsafe if libsafe is found on the system" msgstr "" #: security/l10n.pm:30 #, c-format msgid "Enable the logging of IPv4 strange packets" msgstr "" #: security/l10n.pm:31 #, c-format msgid "Enable msec hourly security check" msgstr "" #: security/l10n.pm:32 #, c-format msgid "Enable su only from the wheel group members or for any user" msgstr "" #: security/l10n.pm:33 #, c-format msgid "Use password to authenticate users" msgstr "Използва парола за разпознаване на потребителите" #: security/l10n.pm:34 #, c-format msgid "Ethernet cards promiscuity check" msgstr "" #: security/l10n.pm:35 #, c-format msgid "Daily security check" msgstr "" #: security/l10n.pm:36 #, c-format msgid "Sulogin(8) in single user level" msgstr "" #: security/l10n.pm:37 #, c-format msgid "No password aging for" msgstr "Без остаряване на паролата за" #: security/l10n.pm:38 #, c-format msgid "Set password expiration and account inactivation delays" msgstr "" #: security/l10n.pm:39 #, c-format msgid "Password history length" msgstr "Дължина на \"историята\" на паролите" #: security/l10n.pm:40 #, c-format msgid "Password minimum length and number of digits and upcase letters" msgstr "" #: security/l10n.pm:41 #, c-format msgid "Root umask" msgstr "Root umask" #: security/l10n.pm:42 #, c-format msgid "Shell history size" msgstr "" #: security/l10n.pm:43 #, c-format msgid "Shell timeout" msgstr "Шел време за достъп" #: security/l10n.pm:44 #, c-format msgid "User umask" msgstr "Потребителска маска" #: security/l10n.pm:45 #, c-format msgid "Check open ports" msgstr "Проверява отворените портове" #: security/l10n.pm:46 #, c-format msgid "Check for unsecured accounts" msgstr "" #: security/l10n.pm:47 #, c-format msgid "Check permissions of files in the users' home" msgstr "" #: security/l10n.pm:48 #, c-format msgid "Check if the network devices are in promiscuous mode" msgstr "" #: security/l10n.pm:49 #, c-format msgid "Run the daily security checks" msgstr "Пуска ежедневна проверка за сигурност" #: security/l10n.pm:50 #, c-format msgid "Check additions/removals of sgid files" msgstr "" #: security/l10n.pm:51 #, c-format msgid "Check empty password in /etc/shadow" msgstr "" #: security/l10n.pm:52 #, c-format msgid "Verify checksum of the suid/sgid files" msgstr "" #: security/l10n.pm:53 #, c-format msgid "Check additions/removals of suid root files" msgstr "" #: security/l10n.pm:54 #, c-format msgid "Report unowned files" msgstr "" #: security/l10n.pm:55 #, c-format msgid "Check files/directories writable by everybody" msgstr "Проверява файловете/директориите достъпни за писане от всеки." #: security/l10n.pm:56 #, c-format msgid "Run chkrootkit checks" msgstr "" #: security/l10n.pm:57 #, c-format msgid "Do not send mails when unneeded" msgstr "" #: security/l10n.pm:58 #, c-format msgid "If set, send the mail report to this email address else send it to root" msgstr "Ако е включено, праща отчет на този е-адрес,иначе праща на root." #: security/l10n.pm:59 #, c-format msgid "Report check result by mail" msgstr "изпраща съобщение за резултата по е-пощата." #: security/l10n.pm:60 #, c-format msgid "Run some checks against the rpm database" msgstr "" #: security/l10n.pm:61 #, c-format msgid "Report check result to syslog" msgstr "Изпраща резултатра от проверката към syslog" #: security/l10n.pm:62 #, c-format msgid "Reports check result to tty" msgstr "Изпраща резултата от проверката на tty." #: security/level.pm:10 #, c-format msgid "Welcome To Crackers" msgstr "Добре дошли при Cracker-ите" #: security/level.pm:11 #, c-format msgid "Poor" msgstr "Лошо" #: security/level.pm:13 #, c-format msgid "High" msgstr "Високо" #: security/level.pm:14 #, c-format msgid "Higher" msgstr "По-високо" #: security/level.pm:15 #, c-format msgid "Paranoid" msgstr "Параноично" #: security/level.pm:41 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "Това ниво се използва с внимание. Това кара системата ви по-лесна за\n" "употреба, но е по-чувствително: не трябва да бъде използвана на машини\n" "свързани с други или по Интернет. Няма достъп с пароли." #: security/level.pm:44 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "Паролата сега е включена, но използването като мрежов компютър не е " "препоръчително." #: security/level.pm:45 #, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "Това е стандартната сигурност препоръчителна за компютър, който ще бъде " "използван да се свързва към Интернет като клиент." #: security/level.pm:46 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" "Вече има някой ограничения, и повече автоматични проверки ще се изпълняват " "всяка вечер." #: security/level.pm:47 #, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "С това ниво на сигурност, ползването на системата като сървър става " "възможно.\n" "Сигурността сега е достатъчно голяма да се използва системата като\n" "сървър приемащ връзки от много клиенти. " #: security/level.pm:50 #, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "Подобно на предишното ниво, но системата е напълно затворена.\n" "Нивото на сигурност е на максимума си." #: security/level.pm:55 #, c-format msgid "DrakSec Basic Options" msgstr "Основни опции на DrakSec " #: security/level.pm:57 #, c-format msgid "Please choose the desired security level" msgstr "Моля, изберете ниво на сигурност" #: security/level.pm:61 #, c-format msgid "Security level" msgstr "Ниво на сигурност" #: security/level.pm:63 #, c-format msgid "Use libsafe for servers" msgstr "Използвайте libsafe за сървъри" #: security/level.pm:64 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" "Библиотека, която осигурява защита от атаки с препълване на буфер и форматни " "стрингове." #: security/level.pm:65 #, c-format msgid "Security Administrator (login or email)" msgstr "Администратор по сигурността (логин или Ел.поща)" #: services.pm:19 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "Пусни ALSA (Advanced Linux Sound Architecture) звуковата система" #: services.pm:20 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "Anacrton - периодично изпълняване на команди по разписание." #: services.pm:21 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "apmd се използва за наблюдение на батерията и записвайки статуса чрез\n" "syslog. Може също да се използва за спиране на машината, когато батерията е " "изтощена." #: services.pm:23 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "Пуска команди по разписание във време определено от командата at и пуска\n" "набор от други, когато натовареността спадне достатъчно." #: services.pm:25 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "cron е стандартна UNIX програма, която периодично пуска определени програми\n" "по разписание. vixie cron добавя множество преимущества над тези на простия\n" "UNIX cron, включително по-добра сигурност и мощни настройващи опции." #: services.pm:28 #, c-format msgid "" "FAM is a file monitoring daemon. It is used to get reports when files " "change.\n" "It is used by GNOME and KDE" msgstr "" #: services.pm:30 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM добавя поддръжка на мишка в текстово-базираните Linux приложения като\n" "Midnight Commander. Също така позволява базираните на мишка конзоли\n" "режи-и-лепи операции, и включва поддръжка на изкачащи менюта на козолата." #: services.pm:33 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" "HardDrake прави проби на хардуера, и евентуално настройва\n" "нов/променен хардуер." #: services.pm:35 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" "Apache е World Wide Web (WWW) сървър. Той служи да обработва на HTML " "файлове\n" "и CGI." #: services.pm:36 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "Internet superserver daemon (често наричан inetd) пуска различни други\n" "Интернет услуги. Той отговаря за пускането на много услуги от рода на\n" "telnet, ftp, rsh и rlogin. Изключването на inetd изключва всички услуги,\n" "за които отговаря." #: services.pm:40 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" "Включи филтрирането на пакети за Linux ядра серия 2.2, за\n" "настрока на защитната стена, s cel защитава на машината ви от\n" "мрежови атаки." #: services.pm:42 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "Този пакет зарежда маркираната клавиатурна наредба в /etc/sysconfig/" "keyboard.\n" "Тя може да бъде избрана с инструмента kbdconfig. Трябва да оставите " "товавключено за повечето машини." #: services.pm:45 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" "Автоматично регенериране на header-ите на ядрото, в /boot за\n" "/usr/include/linux/{autoconf,version}.h" #: services.pm:47 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "Автоматично засичане и настройка на хардуера при стартиране." #: services.pm:48 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" "Linuxconf понякога урежда извършването на различни задачи\n" "при стартиране за поддръжка на системната настройка." #: services.pm:50 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd е демона за печат необходим на lpr да работи нормално. Той просто е\n" "сървър, който определя работите за печат на принтер(а/ите)." #: services.pm:52 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" "Linux Virtual Server се използва за изграждане на високопроизводителен\n" "и добре достъпен сървър." #: services.pm:54 #, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "named (BIND) е Domain Name Server (DNS), който се използва да превърне\n" "името на хоста до IP адрес." #: services.pm:55 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "Монтира и демонтира всякакви Network File System (NFS), SMB (LAN\n" "Manager/Windows), и NCP (NetWare)." #: services.pm:57 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "Активира/деактивира всички мрежови интерфейси, настроени да се пускат\n" "при стартиране на машината." #: services.pm:59 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS е популярен протокол за обмен на файлове по TCP/IP мрежи.\n" "Тази услуга осигурява функционалността на NFS сървъра, който се настройва\n" "чрез файла /etc/exports." #: services.pm:62 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS е популярен протокол за обмен на файлове по TCP/IP мрежи.\n" "Тази услуга осигурява функционалността на заключването на NFS файловете." #: services.pm:64 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and Xorg at boot." msgstr "" "Автоматично включване на numlock клавиша под конзола и\n" "Xorg при стартиране." #: services.pm:66 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "Поддръжка на OKI 4w и съвместими win-принтери." #: services.pm:67 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It will not get started unless configured so it is safe " "to have\n" "it installed on machines that do not need it." msgstr "" "PCMCIA поддържката обикновенно поддържа неща като ethernet и модеми в\n" "laptop-и. Това няма да се стартира преди да бъде настроен, така че е\n" "по-добре да я имате инсталирана на машини, които не се нуждаят от нея." #: services.pm:70 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "portmapper се справя с RPC връзки, които се използват от протоколи като\n" "NFS и NIS. portmap сървъра трябва да е пуснат на машини, които работят като\n" "сървър за протоколи, които се нуждаят да използват RPC механизъм." #: services.pm:73 #, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" "Postfix е Main Transport Agent (MTA), който е програма която пренася\n" "поща от машина на машина." #: services.pm:74 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "Запазва и възстановята потока на системна ентропия за по-голямо качество\n" "на произволно генериране на числа." #: services.pm:76 #, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" "Свържи чисти драйвери с блокови устройства (като дялове\n" "на твърдия диск), за употребата от приложения като Oracle или DVD плеъри" #: services.pm:78 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "touted демона позволява таблица за IP рутиране автоматично обновявана чрез\n" "RIP протокола. Докато RIP е широко използвана за малки мрежи, за по-сложни\n" "протоколи за рутиране са нужни за сложни мрежи. " #: services.pm:81 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "rstat протокола позволява на мрежовите потребители да извличат\n" "параметрите на възможностите за всяка машина на мрежата." #: services.pm:83 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "rusers протокола позволява на мрежовите потребители да проверяват кой е\n" "влязъл на друга отговарящата машина." #: services.pm:85 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similar to finger)." msgstr "" "rwho протокола позволява на отдалечени потребители да се сдобият със списък\n" "на всички потребители влезли на машина с работещ rwho демон (подобен на " "finger)." #: services.pm:87 #, c-format msgid "Launch the sound system on your machine" msgstr "Пуснкане звуковата система на машината ви" #: services.pm:88 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "Syslog е програма която много демони използват да запазват съобщения в\n" "различни системни файлове (логове). Добре е постоянно да я имате работеща." #: services.pm:90 #, c-format msgid "Load the drivers for your usb devices." msgstr "Зареждане драйвери за вашите USB устройства." #: services.pm:91 #, c-format msgid "Starts the X Font Server (this is mandatory for Xorg to run)." msgstr "Стартира X Font Server (това е задължително, за да тръгне Xorg)." #: services.pm:115 services.pm:157 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "Избира услугите, които трябва да се пуснат при пускане на машината" #: services.pm:127 standalone/draksambashare:105 #, c-format msgid "Printing" msgstr "Печатане" #: services.pm:128 #, c-format msgid "Internet" msgstr "Интернет" #: services.pm:131 #, c-format msgid "File sharing" msgstr "Поделяне на файлове" #: services.pm:138 #, c-format msgid "Remote Administration" msgstr "Отдалечена администрация" #: services.pm:146 #, c-format msgid "Database Server" msgstr "Сървър Бази-данни" #: services.pm:209 #, c-format msgid "running" msgstr "стартиране" #: services.pm:209 #, c-format msgid "stopped" msgstr "спряна" #: services.pm:213 #, c-format msgid "Services and daemons" msgstr "Услуиги и демони" #: services.pm:219 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" "Няма допълнителна информация\n" "за тази услуга, съжелявам." #: services.pm:224 ugtk2.pm:1009 #, c-format msgid "Info" msgstr "Информация" #: services.pm:227 #, c-format msgid "Start when requested" msgstr "" #: services.pm:227 #, c-format msgid "On boot" msgstr "При зареждане" #: services.pm:244 #, c-format msgid "Start" msgstr "Старт" #: services.pm:244 #, c-format msgid "Stop" msgstr "Стоп" #: share/advertising/01.pl:3 #, c-format msgid "Mandriva Linux 2006: Packs" msgstr "" #: share/advertising/02.pl:3 #, c-format msgid "Mandriva Linux 2006: More features" msgstr "" #: share/advertising/03.pl:3 #, c-format msgid "Interactive firewall" msgstr "" #: share/advertising/04.pl:3 #, c-format msgid "Desktop search" msgstr "" #: share/advertising/05.pl:3 #, c-format msgid "New package manager" msgstr "" #: share/advertising/06.pl:3 #, c-format msgid "Mandriva Linux 2006: More performances" msgstr "" #: share/advertising/07.pl:3 #, c-format msgid "Latest kernel and GCC" msgstr "" #: share/advertising/08.pl:3 #, c-format msgid "High Availibility" msgstr "" #: share/advertising/09.pl:3 #, c-format msgid "Delta RPM" msgstr "" #: share/advertising/10.pl:3 #, c-format msgid "Low resources setup" msgstr "" #: share/advertising/11.pl:3 #, c-format msgid "Boot time reduction" msgstr "" #: share/advertising/12.pl:3 #, c-format msgid "Mandriva Linux 2006: Easier to use" msgstr "" #: share/advertising/13.pl:3 #, c-format msgid "Latest graphical interfaces: KDE and GNOME" msgstr "" #: share/advertising/14.pl:3 #, c-format msgid "auto-installation servers" msgstr "" #: share/advertising/15.pl:3 #, c-format msgid "Easy and quick installation" msgstr "" #: share/advertising/16.pl:3 #, c-format msgid "Easy configuration thanks to 60 wizards" msgstr "" #: share/advertising/17.pl:3 #, c-format msgid "Look and feel improved" msgstr "" #: share/advertising/18.pl:3 #, c-format msgid "New webmin theme" msgstr "" #: share/advertising/19.pl:3 #, c-format msgid "Mandriva Linux 2006: More support" msgstr "" #: share/advertising/20.pl:3 #, c-format msgid "Better Hardware support" msgstr "" #: share/advertising/21.pl:3 #, c-format msgid "Xen support" msgstr "" #: share/advertising/22.pl:3 #, c-format msgid "Mandriva Linux 2006: More information" msgstr "" #: share/advertising/23.pl:3 #, c-format msgid "Mandriva Linux 2006: Where to buy?" msgstr "" #: share/advertising/24.pl:3 #, c-format msgid "Where to find technical assistance?" msgstr "" #: share/advertising/25.pl:3 #, c-format msgid "How to join the Mandriva Linux community?" msgstr "" #: share/advertising/26.pl:3 #, c-format msgid "How to maintain your system up-to-date?" msgstr "" #: share/advertising/intel.pl:3 #, c-format msgid "Intel Software" msgstr "" #: share/advertising/skype.pl:3 #, c-format msgid "Skype lets you make calls through the Internet for free." msgstr "" #: share/compssUsers.pl:26 #, c-format msgid "Office Workstation" msgstr "Офисна работна станция" #: share/compssUsers.pl:28 #, c-format msgid "" "Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets " "(OpenOffice.org Calc, Kspread), PDF viewers, etc" msgstr "" "Офис програми: word-процесори (OpenOffice.org Writer, Kword), таблици " "(OpenOffice.org Calc, Kspread), преглед на PDF, и т.н." #: share/compssUsers.pl:29 #, c-format msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "Офис програми: word-процесори (kword, abiword), таблици (kspread, gnumeric), " "преглед на PDF, и т.н." #: share/compssUsers.pl:34 #, c-format msgid "Game station" msgstr "Игрална станция" #: share/compssUsers.pl:35 #, c-format msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "Забавни програми: аркадни игри, игри на маса, стратегии и т.н." #: share/compssUsers.pl:38 #, c-format msgid "Multimedia station" msgstr "Мутимедийна станция" #: share/compssUsers.pl:39 #, c-format msgid "Sound and video playing/editing programs" msgstr "Програми за пускане/поправяне на звук и видео" #: share/compssUsers.pl:44 #, c-format msgid "Internet station" msgstr "Интернет станция" #: share/compssUsers.pl:45 #, fuzzy, c-format msgid "" "Set of tools to read and send mail and news (mutt, tin..) and to browse the " "Web" msgstr "" "Набор от инструменти за четене и изпращане на поща и новини (pine, mutt, " "tin..) и за обикаляне из Мрежата" #: share/compssUsers.pl:50 #, c-format msgid "Network Computer (client)" msgstr "Мрежов компютър (клиент)" #: share/compssUsers.pl:51 #, c-format msgid "Clients for different protocols including ssh" msgstr "Клиенти за различни протоколи включително SSH" #: share/compssUsers.pl:55 #, c-format msgid "Configuration" msgstr "Настройка" #: share/compssUsers.pl:56 #, c-format msgid "Tools to ease the configuration of your computer" msgstr "Инструменти за улесняване настройката на компютъра ви" #: share/compssUsers.pl:60 #, c-format msgid "Console Tools" msgstr "Конзолни инструменти" #: share/compssUsers.pl:61 #, c-format msgid "Editors, shells, file tools, terminals" msgstr "Редактори, шелове, файлови инстрименти, терминали" #: share/compssUsers.pl:66 share/compssUsers.pl:170 #, c-format msgid "C and C++ development libraries, programs and include files" msgstr "Библиотеки за разработка на C и C++, програми и include файлове" #: share/compssUsers.pl:70 share/compssUsers.pl:174 #, c-format msgid "Documentation" msgstr "Документация" #: share/compssUsers.pl:71 share/compssUsers.pl:175 #, c-format msgid "Books and Howto's on Linux and Free Software" msgstr "Книги и HOTWO-та за Linux и свободния софтуер" #: share/compssUsers.pl:75 share/compssUsers.pl:178 #, c-format msgid "LSB" msgstr "" #: share/compssUsers.pl:76 share/compssUsers.pl:179 #, c-format msgid "Linux Standard Base. Third party applications support" msgstr "" #: share/compssUsers.pl:86 #, c-format msgid "Apache" msgstr "Apache" #: share/compssUsers.pl:89 #, fuzzy, c-format msgid "Groupware" msgstr "Група" #: share/compssUsers.pl:90 #, c-format msgid "Kolab Server" msgstr "Kolab Сървър" #: share/compssUsers.pl:93 share/compssUsers.pl:134 #, c-format msgid "Firewall/Router" msgstr "Сървър, Firewall/Рутер" #: share/compssUsers.pl:94 share/compssUsers.pl:135 #, c-format msgid "Internet gateway" msgstr "Интернет gateway" #: share/compssUsers.pl:97 #, fuzzy, c-format msgid "Mail/News" msgstr "/Файл/_Нов" #: share/compssUsers.pl:98 #, fuzzy, c-format msgid "Postfix mail server, Inn news server" msgstr "Postfix пощенски сървър" #: share/compssUsers.pl:101 #, c-format msgid "Directory Server" msgstr "Сървър с директории" #: share/compssUsers.pl:105 #, c-format msgid "FTP Server" msgstr "FTP сървър" #: share/compssUsers.pl:106 #, c-format msgid "ProFTPd" msgstr "" #: share/compssUsers.pl:109 #, fuzzy, c-format msgid "DNS/NIS" msgstr "FND/NIS" #: share/compssUsers.pl:110 #, c-format msgid "Domain Name and Network Information Server" msgstr "Име на домейн и Мрежов Информационен Сървър" #: share/compssUsers.pl:113 #, fuzzy, c-format msgid "File and Printer Sharing Server" msgstr "Сървър на принтера" #: share/compssUsers.pl:114 #, fuzzy, c-format msgid "NFS Server, Samba server" msgstr "Samba Сървър" #: share/compssUsers.pl:117 share/compssUsers.pl:130 #, c-format msgid "Database" msgstr "Сървър, Бази-данни" #: share/compssUsers.pl:118 #, fuzzy, c-format msgid "PostgreSQL and MySQL Database Server" msgstr "PostgreSQL или MySQL сървър за бази-данни" #: share/compssUsers.pl:122 #, c-format msgid "Web/FTP" msgstr "Сървър, Web/FTP" #: share/compssUsers.pl:123 #, c-format msgid "Apache, Pro-ftpd" msgstr "Apache и Pro-ftpd" #: share/compssUsers.pl:126 #, c-format msgid "Mail" msgstr "Е-поща" #: share/compssUsers.pl:127 #, c-format msgid "Postfix mail server" msgstr "Postfix пощенски сървър" #: share/compssUsers.pl:131 #, c-format msgid "PostgreSQL or MySQL database server" msgstr "PostgreSQL или MySQL сървър за бази-данни" #: share/compssUsers.pl:138 #, c-format msgid "Network Computer server" msgstr "Мрежов компютър, сървър" #: share/compssUsers.pl:139 #, c-format msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "NFS сървър, SMB сървър, Proxy сървър, SSH сървър" #: share/compssUsers.pl:147 #, c-format msgid "KDE Workstation" msgstr "KDE работна станция" #: share/compssUsers.pl:148 #, c-format msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "" "The K Desktop Environment, проста среда с колекция от придружаващи " "инструменти" #: share/compssUsers.pl:152 #, c-format msgid "GNOME Workstation" msgstr "Gnome работна станция" #: share/compssUsers.pl:153 #, c-format msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "" "Графична среда с потребителски набор от приложения и desktop инструменти" #: share/compssUsers.pl:156 #, fuzzy, c-format msgid "IceWm Desktop" msgstr "настолен компютър" #: share/compssUsers.pl:160 #, c-format msgid "Other Graphical Desktops" msgstr "Други графични desktop-и" #: share/compssUsers.pl:161 #, fuzzy, c-format msgid "Window Maker, Enlightenment, Fvwm, etc" msgstr "Icewm, Window Maker, Enlightenment, Fvwm и т.н." #: share/compssUsers.pl:184 #, c-format msgid "Utilities" msgstr "Помощни програми" #: share/compssUsers.pl:186 share/compssUsers.pl:187 standalone/logdrake:384 #, c-format msgid "SSH Server" msgstr "SSH Сървър" #: share/compssUsers.pl:191 #, fuzzy, c-format msgid "Webmin" msgstr "Webmin Обслужване" #: share/compssUsers.pl:192 #, fuzzy, c-format msgid "Webmin Remote Configuration Server" msgstr "Конфигурация на Терминален Сървър в Mandriva Linux" #: share/compssUsers.pl:196 #, fuzzy, c-format msgid "Network Utilities/Monitoring" msgstr "Мониторинг на мрежата" #: share/compssUsers.pl:197 #, c-format msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..." msgstr "" #: share/compssUsers.pl:201 #, fuzzy, c-format msgid "Mandriva Wizards" msgstr "Контролен център на Mandriva Linux" #: share/compssUsers.pl:202 #, fuzzy, c-format msgid "Wizards to configure server" msgstr "ННеуспешна настройка на принтер \"%s\"!" #: standalone.pm:21 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" #: standalone.pm:40 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" #: standalone.pm:52 #, c-format msgid "" "[--boot] [--splash]\n" "OPTIONS:\n" " --boot - enable to configure boot loader\n" " --splash - enable to configure boot theme\n" "default mode: offer to configure autologin feature" msgstr "" #: standalone.pm:57 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of Mandriva Linux tools\n" " --incident - program should be one of Mandriva Linux tools" msgstr "" #: standalone.pm:63 #, c-format msgid "" "[--add]\n" " --add - \"add a network interface\" wizard\n" " --del - \"delete a network interface\" wizard\n" " --skip-wizard - manage connections\n" " --internet - configure internet\n" " --wizard - like --add" msgstr "" #: standalone.pm:69 #, c-format msgid "" "\n" "Font Importation and monitoring application\n" "\n" "OPTIONS:\n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--install : accept any font file and any directory.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" #: standalone.pm:84 #, c-format msgid "" "[OPTIONS]...\n" "Mandriva Linux Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" #: standalone.pm:96 #, c-format msgid "[keyboard]" msgstr "[клавиатура]" #: standalone.pm:97 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "" #: standalone.pm:98 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : do not be interactive. To be used with (dis)connect." msgstr "" #: standalone.pm:107 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" #: standalone.pm:108 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation do not ask first confirmation question in Mandriva " "Update mode\n" " --no-verify-rpm do not verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" #: standalone.pm:113 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" #: standalone.pm:114 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" #: standalone.pm:146 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" "\n" "Използване: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " #: standalone/XFdrake:59 #, fuzzy, c-format msgid "You need to reboot for changes to take effect" msgstr "Трябва да рестартирате, преди промените да влязат в сила" #: standalone/XFdrake:90 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "Моля излезте от сесията и използвайте Ctrl-Alt-BackSpace" #: standalone/XFdrake:94 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "" #: standalone/drakTermServ:102 standalone/drakTermServ:108 #, c-format msgid "%s: %s requires a username...\n" msgstr "" #: standalone/drakTermServ:119 #, c-format msgid "" "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, " "0/1 for Local Config...\n" msgstr "" "%s %s изисква име на хост,MAC адрес,IP,nbi-image, 0/1 за THIN_CLIENT, 0/1 за " "Локална настройка...\n" #: standalone/drakTermServ:125 #, c-format msgid "%s: %s requires hostname...\n" msgstr "" #: standalone/drakTermServ:207 standalone/drakTermServ:210 #, fuzzy, c-format msgid "Terminal Server Configuration" msgstr "Конфигурация на Терминален Сървър в Mandriva Linux" #: standalone/drakTermServ:216 #, fuzzy, c-format msgid "dhcpd Config" msgstr "Настройка на dhcpd..." #: standalone/drakTermServ:220 #, c-format msgid "Enable Server" msgstr "Включва Сървър" #: standalone/drakTermServ:226 #, c-format msgid "Disable Server" msgstr "Изключва Сървър" #: standalone/drakTermServ:232 #, c-format msgid "Start Server" msgstr "Стартира сървър" #: standalone/drakTermServ:238 #, c-format msgid "Stop Server" msgstr "Спира сървър" #: standalone/drakTermServ:247 #, c-format msgid "Etherboot Floppy/ISO" msgstr "" #: standalone/drakTermServ:251 #, c-format msgid "Net Boot Images" msgstr "" #: standalone/drakTermServ:258 #, c-format msgid "Add/Del Users" msgstr "Добавя/Изтрива потребители" #: standalone/drakTermServ:262 #, c-format msgid "Add/Del Clients" msgstr "Добавя/Изтрива клиенти" #: standalone/drakTermServ:270 #, c-format msgid "Images" msgstr "Изображения" #: standalone/drakTermServ:271 #, c-format msgid "Clients/Users" msgstr "" #: standalone/drakTermServ:289 standalone/drakbug:47 #, c-format msgid "First Time Wizard" msgstr "Първоначален помощник" #: standalone/drakTermServ:326 standalone/drakTermServ:327 #, c-format msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$" msgstr "" #: standalone/drakTermServ:333 #, c-format msgid "" "\n" " This wizard routine will:\n" " \t1) Ask you to select either 'thin' or 'fat' clients.\n" "\t2) Setup DHCP.\n" "\t\n" "After doing these steps, the wizard will:\n" "\t\n" " a) Make all " "nbis. \n" " b) Activate the " "server. \n" " c) Start the " "server. \n" " d) Synchronize the shadow files so that all users, including root, \n" " are added to the shadow$$CLIENT$$ " "file. \n" " e) Ask you to make a boot floppy.\n" " f) If it's thin clients, ask if you want to restart KDM.\n" msgstr "" #: standalone/drakTermServ:379 #, fuzzy, c-format msgid "Cancel Wizard" msgstr "Стартиране на помощник" #: standalone/drakTermServ:394 #, c-format msgid "Please save dhcpd config!" msgstr "" #: standalone/drakTermServ:422 #, fuzzy, c-format msgid "Use thin clients." msgstr "Разрешава Thin клиенти" #: standalone/drakTermServ:424 #, c-format msgid "Sync client X keyboard settings with server." msgstr "" #: standalone/drakTermServ:426 #, c-format msgid "" "Please select default client type (Fat is the default type if 'Use thin' is " "unchecked).\n" " 'Thin' clients run everything off the server's CPU/RAM, using the client " "display.\n" " 'Fat' clients use their own CPU/RAM but the server's filesystem." msgstr "" #: standalone/drakTermServ:446 #, c-format msgid "Creating net boot images for all kernels" msgstr "" #: standalone/drakTermServ:447 standalone/drakTermServ:769 #: standalone/drakTermServ:785 #, c-format msgid "This will take a few minutes." msgstr "Това ще отнеме няколко минути." #: standalone/drakTermServ:453 standalone/drakTermServ:493 #, fuzzy, c-format msgid "Done!" msgstr "Готово" #: standalone/drakTermServ:464 standalone/drakTermServ:849 #, c-format msgid "%s failed" msgstr "" #: standalone/drakTermServ:473 #, c-format msgid "" "Not enough space to create\n" "NBIs in %s.\n" "Needed: %d MB, Free: %d MB" msgstr "" #: standalone/drakTermServ:479 #, c-format msgid "Syncing server user list with client list, including root." msgstr "" #: standalone/drakTermServ:499 #, c-format msgid "" "In order to enable changes made for thin clients, the display manager must " "be restarted. Restart now?" msgstr "" #: standalone/drakTermServ:534 #, fuzzy, c-format msgid "Terminal Server Overview" msgstr "Конфигурация на Терминален Сървър в Mandriva Linux" #: standalone/drakTermServ:535 #, c-format msgid "" " - Create Etherboot Enabled Boot Images:\n" " \tTo boot a kernel via etherboot, a special kernel/initrd image must " "be created.\n" " \tmkinitrd-net does much of this work and drakTermServ is just a " "graphical \n" " \tinterface to help manage/customize these images. To create the " "file \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " "include in \n" " \tdhcpd.conf, you should create the etherboot images for at least " "one full kernel." msgstr "" #: standalone/drakTermServ:541 #, c-format msgid "" " - Maintain /etc/dhcpd.conf:\n" " \tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP \n" " \taddress and net boot images to the machine. drakTermServ helps " "create/remove \n" " \tthese entries.\n" "\t\t\t\n" " \t(PCI cards may omit the image - etherboot will request the correct " "image. \n" "\t\t\tYou should also consider that when etherboot looks for the images, it " "expects \n" "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \tA typical dhcpd.conf stanza to support a diskless client looks " "like:" msgstr "" #: standalone/drakTermServ:559 #, c-format msgid "" " While you can use a pool of IP addresses, rather than setup a " "specific entry for\n" " a client machine, using a fixed address scheme facilitates using the " "functionality\n" " of client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" " Note: The '#type' entry is only used by drakTermServ. Clients can " "either be 'thin'\n" " or 'fat'. Thin clients run most software on the server via XDMCP, " "while fat clients run \n" " most software on the client machine. A special inittab, %s is\n" " written for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are \n" " modified if thin clients are used, to enable XDMCP. Since there are " "security issues in \n" " using XDMCP, hosts.deny and hosts.allow are modified to limit access " "to the local\n" " subnet.\n" "\t\t\t\n" " Note: The '#hdw_config' entry is also only used by drakTermServ. " "Clients can either \n" " be 'true' or 'false'. 'true' enables root login at the client " "machine and allows local \n" " hardware configuration of sound, mouse, and X, using the 'drak' " "tools. This is enabled \n" " by creating separate config files associated with the client's IP " "address and creating \n" " read/write mount points to allow the client to alter the file. Once " "you are satisfied \n" " with the configuration, you can remove root login privileges from " "the client.\n" "\t\t\t\n" " Note: You must stop/start the server after adding or changing " "clients." msgstr "" #: standalone/drakTermServ:579 #, c-format msgid "" " - Maintain /etc/exports:\n" " \tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \tdiskless clients.\n" "\n" " \tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" " \tWith SUBNET/MASK being defined for your network." msgstr "" #: standalone/drakTermServ:591 #, c-format msgid "" " - Maintain %s:\n" " \tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" " \thelps in this respect by adding or removing system users from this " "file." msgstr "" #: standalone/drakTermServ:595 #, c-format msgid "" " - Per client %s:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tdrakTermServ will help create these files." msgstr "" #: standalone/drakTermServ:600 #, c-format msgid "" " - Per client system configuration files:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tclients can customize files such as /etc/modules.conf, /etc/" "sysconfig/mouse, \n" " \t/etc/sysconfig/keyboard on a per-client basis.\n" "\n" " Note: Enabling local client hardware configuration does enable root " "login to the terminal \n" " server on each client machine that has this feature enabled. Local " "configuration can be\n" " turned back off, retaining the configuration files, once the client " "machine is configured." msgstr "" #: standalone/drakTermServ:609 #, c-format msgid "" " - /etc/xinetd.d/tftp:\n" " \tdrakTermServ will configure this file to work in conjunction with " "the images created\n" " \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to \n" " \teach diskless client.\n" "\n" " \tA typical TFTP configuration file looks like:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \tThe changes here from the default installation are changing the " "disable flag to\n" " \t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \tputs its images." msgstr "" #: standalone/drakTermServ:630 #, c-format msgid "" " - Create etherboot floppies/CDs:\n" " \tThe diskless client machines need either ROM images on the NIC, or " "a boot floppy\n" " \tor CD to initiate the boot sequence. drakTermServ will help " "generate these\n" " \timages, based on the NIC in the client machine.\n" " \t\t\n" " \tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0" msgstr "" #: standalone/drakTermServ:663 #, c-format msgid "Boot Floppy" msgstr "Стартова дискета" #: standalone/drakTermServ:665 #, c-format msgid "Boot ISO" msgstr "" #: standalone/drakTermServ:667 #, fuzzy, c-format msgid "PXE Image" msgstr "Образ" #: standalone/drakTermServ:728 #, fuzzy, c-format msgid "Default kernel version" msgstr "Версия на ядрото" #: standalone/drakTermServ:731 #, c-format msgid "Create PXE images." msgstr "" #: standalone/drakTermServ:757 #, c-format msgid "Install i586 kernel for older clients" msgstr "" #: standalone/drakTermServ:767 #, c-format msgid "Build Whole Kernel -->" msgstr "Построява цялото ядро -->" #: standalone/drakTermServ:774 #, c-format msgid "No kernel selected!" msgstr "Няма избрано ядро!" #: standalone/drakTermServ:777 #, c-format msgid "Build Single NIC -->" msgstr "Построява единичен NIC -->" #: standalone/drakTermServ:781 #, c-format msgid "No NIC selected!" msgstr "Няма избран NIC !" #: standalone/drakTermServ:784 #, c-format msgid "Build All Kernels -->" msgstr "Построява всички ядра -->" #: standalone/drakTermServ:797 #, c-format msgid "<-- Delete" msgstr "<-- Изтрива" #: standalone/drakTermServ:802 #, fuzzy, c-format msgid "No image selected!" msgstr "Няма избран NIC !" #: standalone/drakTermServ:805 #, c-format msgid "Delete All NBIs" msgstr "Изтрива всички NBI" #: standalone/drakTermServ:880 #, c-format msgid "Building images for kernel:" msgstr "" #: standalone/drakTermServ:1004 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" #: standalone/drakTermServ:1009 #, c-format msgid "Add User -->" msgstr "Добавя потребител -->" #: standalone/drakTermServ:1015 #, c-format msgid "<-- Del User" msgstr "<-- Изтрива потребител" #: standalone/drakTermServ:1051 #, c-format msgid "type: %s" msgstr "тип: %s" #: standalone/drakTermServ:1055 #, c-format msgid "local config: %s" msgstr "" #: standalone/drakTermServ:1086 #, c-format msgid "" "Allow local hardware\n" "configuration." msgstr "" "Позволява локална настройка\n" "на хардуера" #: standalone/drakTermServ:1095 #, c-format msgid "No net boot images created!" msgstr "" #: standalone/drakTermServ:1114 #, c-format msgid "Thin Client" msgstr "Thin клиент" #: standalone/drakTermServ:1118 #, c-format msgid "Allow Thin Clients" msgstr "Разрешава Thin клиенти" #: standalone/drakTermServ:1119 #, c-format msgid "" "Sync client X keyboard\n" " settings with server." msgstr "" #: standalone/drakTermServ:1120 #, c-format msgid "Add Client -->" msgstr "Добавя клиент -->" #: standalone/drakTermServ:1134 #, c-format msgid "type: fat" msgstr "тип: fat" #: standalone/drakTermServ:1135 #, c-format msgid "type: thin" msgstr "тип: thin" #: standalone/drakTermServ:1142 #, c-format msgid "local config: false" msgstr "локална настройка: не" #: standalone/drakTermServ:1143 #, c-format msgid "local config: true" msgstr "локална настройка: да" #: standalone/drakTermServ:1151 #, c-format msgid "<-- Edit Client" msgstr "<-- Редактира клиент" #: standalone/drakTermServ:1176 #, c-format msgid "Disable Local Config" msgstr "Забранява локалните настройки" #: standalone/drakTermServ:1183 #, c-format msgid "Delete Client" msgstr "Изтрива клиент" #: standalone/drakTermServ:1205 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" "Трябва да престартирате Мениджъа на Дисплей за да имат ефект промените. \n" "(обслужване dm restart - от конзолара)" #: standalone/drakTermServ:1250 #, c-format msgid "Thin clients will not work with autologin. Disable autologin?" msgstr "" #: standalone/drakTermServ:1266 #, c-format msgid "All clients will use %s" msgstr "" #: standalone/drakTermServ:1300 #, c-format msgid "Subnet:" msgstr "Подмрежа:" #: standalone/drakTermServ:1307 #, c-format msgid "Netmask:" msgstr "Мрежова маска:" #: standalone/drakTermServ:1314 #, c-format msgid "Routers:" msgstr "Рутери:" #: standalone/drakTermServ:1321 #, c-format msgid "Subnet Mask:" msgstr "Маска на подмрежа:" #: standalone/drakTermServ:1328 #, c-format msgid "Broadcast Address:" msgstr "Broadcast адрес:" #: standalone/drakTermServ:1335 #, c-format msgid "Domain Name:" msgstr "Име на домейна:" #: standalone/drakTermServ:1343 #, c-format msgid "Name Servers:" msgstr "Name сървъри:" #: standalone/drakTermServ:1354 #, c-format msgid "IP Range Start:" msgstr "Начало на IP обхват:" #: standalone/drakTermServ:1355 #, c-format msgid "IP Range End:" msgstr "Край на IP обхват:" #: standalone/drakTermServ:1397 #, c-format msgid "Append TS Includes To Existing Config" msgstr "" #: standalone/drakTermServ:1399 #, c-format msgid "Write Config" msgstr "Записва настройка" #: standalone/drakTermServ:1415 #, c-format msgid "dhcpd Server Configuration" msgstr "Конфигуриране на dhcpd сървър" #: standalone/drakTermServ:1416 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" "Повечето от тези стойности са извлечени\n" "от вашата работеща система.\n" "Вие може да ги промените при необходимост." #: standalone/drakTermServ:1419 #, c-format msgid "" "Dynamic IP Address Pool\n" "(needed for PXE clients):" msgstr "" #: standalone/drakTermServ:1572 #, c-format msgid "Write to %s failed!" msgstr "" #: standalone/drakTermServ:1584 #, c-format msgid "Please insert floppy disk:" msgstr "Сложете дискета:" #: standalone/drakTermServ:1588 #, c-format msgid "Could not access the floppy!" msgstr "Нямам достъп до флопи!" #: standalone/drakTermServ:1590 #, c-format msgid "Floppy can be removed now" msgstr "Флопито може да бъде извадено сега" #: standalone/drakTermServ:1593 #, c-format msgid "No floppy drive available!" msgstr "Няма флопи устройство!" #: standalone/drakTermServ:1599 #, c-format msgid "PXE image is %s/%s" msgstr "" #: standalone/drakTermServ:1601 #, fuzzy, c-format msgid "Error writing %s/%s" msgstr "Грешка при запис във файла %s" #: standalone/drakTermServ:1611 #, c-format msgid "Etherboot ISO image is %s" msgstr "" #: standalone/drakTermServ:1613 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "Нещо беше грешно! - Дали mkisofs е инсталиран?" #: standalone/drakTermServ:1634 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "Трябва да създадете първо /etc/dhcpd.conf!" #: standalone/drakTermServ:1793 #, c-format msgid "%s passwd bad in Terminal Server - rewriting...\n" msgstr "" #: standalone/drakTermServ:1806 #, fuzzy, c-format msgid "%s is not a user..\n" msgstr "%s не е намерен...\n" #: standalone/drakTermServ:1807 #, c-format msgid "%s is already a Terminal Server user\n" msgstr "" #: standalone/drakTermServ:1809 #, c-format msgid "Addition of %s to Terminal Server failed!\n" msgstr "" #: standalone/drakTermServ:1811 #, c-format msgid "%s added to Terminal Server\n" msgstr "" #: standalone/drakTermServ:1828 #, fuzzy, c-format msgid "Deleted %s...\n" msgstr "Засечен %s" #: standalone/drakTermServ:1830 standalone/drakTermServ:1903 #, c-format msgid "%s not found...\n" msgstr "%s не е намерен...\n" #: standalone/drakTermServ:1931 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" "/etc/hosts.allow и /etc/hosts.deny вече са конфигурирани - не са променени" #: standalone/drakTermServ:2071 #, c-format msgid "Configuration changed - restart clusternfs/dhcpd?" msgstr "Настройката е променена - растартиране на clusternfs/dhcpd" #: standalone/drakautoinst:38 standalone/drakhosts:123 #: standalone/drakhosts:129 standalone/draknfs:84 standalone/draknfs:105 #: standalone/draknfs:444 standalone/draknfs:447 standalone/draknfs:539 #: standalone/draknfs:546 standalone/draksambashare:181 #: standalone/draksambashare:202 standalone/draksambashare:625 #: standalone/draksambashare:792 #, c-format msgid "Error!" msgstr "Грешка !" #: standalone/drakautoinst:39 #, c-format msgid "I can not find needed image file `%s'." msgstr "Не мога да намеря нужна картинка `%s'." #: standalone/drakautoinst:41 #, c-format msgid "Auto Install Configurator" msgstr "Настройчик на автоматична иснталация" #: standalone/drakautoinst:42 #, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Press ok to continue." msgstr "" #: standalone/drakautoinst:60 #, c-format msgid "replay" msgstr "повтори" #: standalone/drakautoinst:60 standalone/drakautoinst:69 #, c-format msgid "manual" msgstr "ръчно" #: standalone/drakautoinst:64 #, c-format msgid "Automatic Steps Configuration" msgstr "Настройка на автоматичните стъпки" #: standalone/drakautoinst:65 #, c-format msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" "Моля, изберете за всяка стъпка, дали ще се преиграе като при инсталацията, " "или ще бъде ръчна" #: standalone/drakautoinst:77 standalone/drakautoinst:78 #: standalone/drakautoinst:92 #, c-format msgid "Creating auto install floppy" msgstr "Подготвям дискета с автоматична инсталация" #: standalone/drakautoinst:90 #, fuzzy, c-format msgid "Insert another blank floppy in drive %s (for drivers disk)" msgstr "Сложете празна дискета в устройство %s" #: standalone/drakautoinst:91 #, fuzzy, c-format msgid "Creating auto install floppy (drivers disk)" msgstr "Подготвям дискета с автоматична инсталация" #: standalone/drakautoinst:156 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" "\n" "Добре дошли.\n" "\n" "Параметрите за автоинсталация са налични в секцията в ляво" #: standalone/drakautoinst:251 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" "Дискетата е успешно създадена.\n" "Сега можете да преиграете инсталацията." #: standalone/drakautoinst:287 #, c-format msgid "Auto Install" msgstr "Автоматично Инсталира" #: standalone/drakautoinst:356 #, c-format msgid "Add an item" msgstr "Добавяне на обект" #: standalone/drakautoinst:363 #, c-format msgid "Remove the last item" msgstr "Изтрива последният обект" #: standalone/drakbackup:153 #, c-format msgid "" "Expect is an extension to the TCL scripting language that allows interactive " "sessions without user intervention." msgstr "" #: standalone/drakbackup:154 #, c-format msgid "Store the password for this system in drakbackup configuration." msgstr "" #: standalone/drakbackup:155 #, c-format msgid "" "For a multisession CD, only the first session will erase the cdrw. Otherwise " "the cdrw is erased before each backup." msgstr "" #: standalone/drakbackup:156 #, c-format msgid "" "This option will save files that have changed. Exact behavior depends on " "whether incremental or differential mode is used." msgstr "" #: standalone/drakbackup:157 #, c-format msgid "" "Incremental backups only save files that have changed or are new since the " "last backup." msgstr "" #: standalone/drakbackup:158 #, c-format msgid "" "Differential backups only save files that have changed or are new since the " "original 'base' backup." msgstr "" #: standalone/drakbackup:159 #, c-format msgid "" "This should be a local user or email address that you want the backup " "results sent to. You will need to define a functioning mail server." msgstr "" #: standalone/drakbackup:160 #, c-format msgid "" "This should be the return address that you want the backup results sent " "from. Default is drakbackup." msgstr "" #: standalone/drakbackup:161 #, c-format msgid "" "Files or wildcards listed in a .backupignore file at the top of a directory " "tree will not be backed up." msgstr "" "Файлове или маски,записани в .backupignore файла в първата директория от " "архива, няма да бъдат архивирани." #: standalone/drakbackup:162 #, c-format msgid "" "For backups to other media, files are still created on the hard drive, then " "moved to the other media. Enabling this option will remove the hard drive " "tar files after the backup." msgstr "" #: standalone/drakbackup:163 #, c-format msgid "" "Some protocols, like rsync, may be configured at the server end. Rather " "than using a directory path, you would use the 'module' name for the service " "path." msgstr "" #: standalone/drakbackup:164 #, c-format msgid "" "Custom allows you to specify your own day and time. The other options use " "run-parts in /etc/crontab." msgstr "" #: standalone/drakbackup:327 #, c-format msgid "No media selected for cron operation." msgstr "" #: standalone/drakbackup:331 #, c-format msgid "No interval selected for cron operation." msgstr "" #: standalone/drakbackup:378 #, c-format msgid "Interval cron not available as non-root" msgstr "" #: standalone/drakbackup:465 standalone/logdrake:440 #, c-format msgid "\"%s\" neither is a valid email nor is an existing local user!" msgstr "" #: standalone/drakbackup:469 standalone/logdrake:445 #, c-format msgid "" "\"%s\" is a local user, but you did not select a local smtp, so you must use " "a complete email address!" msgstr "" #: standalone/drakbackup:478 #, c-format msgid "Valid user list changed, rewriting config file." msgstr "" #: standalone/drakbackup:480 #, c-format msgid "Old user list:\n" msgstr "" #: standalone/drakbackup:482 #, c-format msgid "New user list:\n" msgstr "" #: standalone/drakbackup:511 #, c-format msgid "" "\n" " DrakBackup Report \n" msgstr "" "\n" " DrakBackup отчет \n" "\n" #: standalone/drakbackup:512 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" msgstr "" "\n" " DrakBackup Рапорт \n" "\n" #: standalone/drakbackup:518 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" #: standalone/drakbackup:543 standalone/drakbackup:614 #: standalone/drakbackup:670 #, c-format msgid "Total progress" msgstr "Общ прогрес" #: standalone/drakbackup:596 #, c-format msgid "" "%s exists, delete?\n" "\n" "If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" #: standalone/drakbackup:605 #, c-format msgid "This may take a moment to generate the keys." msgstr "" #: standalone/drakbackup:612 #, fuzzy, c-format msgid "Cannot spawn %s." msgstr "Не мога да отворя %s!" #: standalone/drakbackup:629 #, c-format msgid "No password prompt on %s at port %s" msgstr "" #: standalone/drakbackup:630 #, c-format msgid "Bad password on %s" msgstr "Лоша парола на %s" #: standalone/drakbackup:631 #, c-format msgid "Permission denied transferring %s to %s" msgstr "" #: standalone/drakbackup:632 #, c-format msgid "Can not find %s on %s" msgstr "Не мога да намеря %s на %s" #: standalone/drakbackup:636 #, c-format msgid "%s not responding" msgstr "" #: standalone/drakbackup:640 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s@%s\n" "\n" "without being prompted for a password." msgstr "" #: standalone/drakbackup:690 #, c-format msgid "No CD-R/DVD-R in drive!" msgstr "" #: standalone/drakbackup:694 #, c-format msgid "Does not appear to be recordable media!" msgstr "" #: standalone/drakbackup:699 #, c-format msgid "Not erasable media!" msgstr "Този носител не може да бъде изтрит !" #: standalone/drakbackup:741 #, c-format msgid "This may take a moment to erase the media." msgstr "" #: standalone/drakbackup:799 #, c-format msgid "Permission problem accessing CD." msgstr "" #: standalone/drakbackup:826 #, c-format msgid "No tape in %s!" msgstr "" #: standalone/drakbackup:935 #, c-format msgid "" "Backup destination quota exceeded!\n" "%d MB used vs %d MB allocated." msgstr "" #: standalone/drakbackup:954 standalone/drakbackup:986 #, c-format msgid "Backup system files..." msgstr "Архивиране на системни файлове..." #: standalone/drakbackup:987 standalone/drakbackup:1027 #, c-format msgid "Hard Disk Backup files..." msgstr "Архивни файлове на харддиска" #: standalone/drakbackup:1026 #, c-format msgid "Backup User files..." msgstr "Резервно копие на потребителски файлове..." #: standalone/drakbackup:1060 #, c-format msgid "Backup Other files..." msgstr "Резервно копие на други файлове..." #: standalone/drakbackup:1061 #, c-format msgid "Hard Disk Backup Progress..." msgstr "Прогрес за резервно копие на твърд диск..." #: standalone/drakbackup:1066 #, c-format msgid "No changes to backup!" msgstr "Няма промени за резервно копие!" #: standalone/drakbackup:1083 standalone/drakbackup:1106 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" #: standalone/drakbackup:1092 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" #: standalone/drakbackup:1093 #, c-format msgid "" "Error during sending file via FTP. Please correct your FTP configuration." msgstr "" #: standalone/drakbackup:1095 #, c-format msgid "file list sent by FTP: %s\n" msgstr "" #: standalone/drakbackup:1111 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" #: standalone/drakbackup:1116 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" #: standalone/drakbackup:1125 #, c-format msgid "Error sending mail. Your report mail was not sent." msgstr "" #: standalone/drakbackup:1126 #, c-format msgid " Error while sending mail. \n" msgstr " Грешка по време на изпращане на поща. \n" #: standalone/drakbackup:1156 #, c-format msgid "Can not create catalog!" msgstr "" #: standalone/drakbackup:1398 #, c-format msgid "Backup your System files. (/etc directory)" msgstr "Резервно копие на вашите системни файлове (/etc директория)" #: standalone/drakbackup:1399 standalone/drakbackup:1462 #: standalone/drakbackup:1528 #, c-format msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "" "Използва инкрементално/диференциално създаване на резервно копие ( не замена " "старите)" #: standalone/drakbackup:1401 standalone/drakbackup:1464 #: standalone/drakbackup:1530 #, c-format msgid "Use Incremental Backups" msgstr "Използва инкрементни архиви" #: standalone/drakbackup:1401 standalone/drakbackup:1464 #: standalone/drakbackup:1530 #, c-format msgid "Use Differential Backups" msgstr "" #: standalone/drakbackup:1403 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "Не включва критични файлове (passwd, group, fstab)" #: standalone/drakbackup:1434 #, c-format msgid "Please check all users that you want to include in your backup." msgstr "Моля, изберете всички потребители,които желаете да включите в архива." #: standalone/drakbackup:1461 #, c-format msgid "Do not include the browser cache" msgstr "" #: standalone/drakbackup:1515 #, c-format msgid "Select the files or directories and click on 'OK'" msgstr "" #: standalone/drakbackup:1516 standalone/drakfont:656 #, c-format msgid "Remove Selected" msgstr "Изтриване на оизбраните" #: standalone/drakbackup:1579 #, c-format msgid "Users" msgstr "Потребители" #: standalone/drakbackup:1599 #, c-format msgid "Use network connection to backup" msgstr "Използва мрежовата връзка за архивиране" #: standalone/drakbackup:1601 #, c-format msgid "Net Method:" msgstr "Мрежов метод:" #: standalone/drakbackup:1605 #, c-format msgid "Use Expect for SSH" msgstr "" #: standalone/drakbackup:1606 #, c-format msgid "Create/Transfer backup keys for SSH" msgstr "" #: standalone/drakbackup:1608 #, c-format msgid "Transfer Now" msgstr "Прехвърля сега" #: standalone/drakbackup:1610 #, c-format msgid "Other (not drakbackup) keys in place already" msgstr "" #: standalone/drakbackup:1613 #, c-format msgid "Host name or IP." msgstr "Име на хост: или IP" #: standalone/drakbackup:1618 #, c-format msgid "Directory (or module) to put the backup on this host." msgstr "" #: standalone/drakbackup:1630 #, c-format msgid "Remember this password" msgstr "Запомня тази парола" #: standalone/drakbackup:1646 #, c-format msgid "Need hostname, username and password!" msgstr "" #: standalone/drakbackup:1737 #, c-format msgid "Use CD-R/DVD-R to backup" msgstr "" #: standalone/drakbackup:1740 #, c-format msgid "Choose your CD/DVD device" msgstr "Изберете вашето CD/DVD устройство" #: standalone/drakbackup:1745 #, fuzzy, c-format msgid "Choose your CD/DVD media size" msgstr "Моля, изберете размера на вашето CD/DVD (Mb)" #: standalone/drakbackup:1752 #, c-format msgid "Multisession CD" msgstr "Мултисесиен диск" #: standalone/drakbackup:1754 #, c-format msgid "CDRW media" msgstr "" #: standalone/drakbackup:1760 #, c-format msgid "Erase your RW media (1st Session)" msgstr "Изтриване на вашия RW носител (1ва сесия)" #: standalone/drakbackup:1761 #, c-format msgid " Erase Now " msgstr " Изтрива сега " #: standalone/drakbackup:1767 #, c-format msgid "DVD+RW media" msgstr "" #: standalone/drakbackup:1769 #, fuzzy, c-format msgid "DVD-R media" msgstr "DVDR устройство" #: standalone/drakbackup:1771 #, c-format msgid "DVDRAM device" msgstr "DVDRAM устройство" #: standalone/drakbackup:1802 #, c-format msgid "No CD device defined!" msgstr "Не е дефинирано CD устройство!" #: standalone/drakbackup:1844 #, c-format msgid "Use tape to backup" msgstr "Използва лента за резервно копие" #: standalone/drakbackup:1847 #, c-format msgid "Device name to use for backup" msgstr "" #: standalone/drakbackup:1853 #, c-format msgid "Backup directly to tape" msgstr "" #: standalone/drakbackup:1859 #, c-format msgid "Use tape hardware compression (EXPERIMENTAL)" msgstr "" #: standalone/drakbackup:1865 #, c-format msgid "Do not rewind tape after backup" msgstr "Не превърта лентата след архивиране" #: standalone/drakbackup:1871 #, c-format msgid "Erase tape before backup" msgstr "Изтрива лентата преди да архивира" #: standalone/drakbackup:1877 #, c-format msgid "Eject tape after the backup" msgstr "Изкарва лента след архивиране" #: standalone/drakbackup:1958 #, c-format msgid "Enter the directory to save to:" msgstr "Моля веведете директорията за запазване:" #: standalone/drakbackup:1962 #, fuzzy, c-format msgid "Directory to save to" msgstr "Моля веведете директорията за запазване:" #: standalone/drakbackup:1967 #, c-format msgid "" "Maximum disk space\n" " allocated for backups (MB)" msgstr "" #: standalone/drakbackup:1971 #, c-format msgid "" "Delete incremental or differential\n" " backups older than N days\n" " (0 is keep all backups) to save space" msgstr "" #: standalone/drakbackup:2038 #, c-format msgid "CD-R / DVD-R" msgstr "CDROM / DVDROM" #: standalone/drakbackup:2043 #, c-format msgid "HardDrive / NFS" msgstr "Твърд диск / NFS" #: standalone/drakbackup:2058 standalone/drakbackup:2059 #: standalone/drakbackup:2064 #, c-format msgid "hourly" msgstr "" #: standalone/drakbackup:2058 standalone/drakbackup:2060 #: standalone/drakbackup:2065 #, c-format msgid "daily" msgstr "" #: standalone/drakbackup:2058 standalone/drakbackup:2061 #: standalone/drakbackup:2066 #, c-format msgid "weekly" msgstr "" #: standalone/drakbackup:2058 standalone/drakbackup:2062 #: standalone/drakbackup:2067 #, c-format msgid "monthly" msgstr "Ежемесечно" #: standalone/drakbackup:2058 standalone/drakbackup:2063 #: standalone/drakbackup:2068 #, c-format msgid "custom" msgstr "потребителски" #: standalone/drakbackup:2072 #, c-format msgid "January" msgstr "януари" #: standalone/drakbackup:2072 #, c-format msgid "February" msgstr "февруари" #: standalone/drakbackup:2072 #, c-format msgid "March" msgstr "Март" #: standalone/drakbackup:2073 #, c-format msgid "April" msgstr "април" #: standalone/drakbackup:2073 #, c-format msgid "May" msgstr "май" #: standalone/drakbackup:2073 #, c-format msgid "June" msgstr "юни" #: standalone/drakbackup:2073 #, c-format msgid "July" msgstr "юли" #: standalone/drakbackup:2073 #, c-format msgid "August" msgstr "Август" #: standalone/drakbackup:2073 #, c-format msgid "September" msgstr "септември" #: standalone/drakbackup:2074 #, c-format msgid "October" msgstr "октомври" #: standalone/drakbackup:2074 #, c-format msgid "November" msgstr "Ноември" #: standalone/drakbackup:2074 #, c-format msgid "December" msgstr "декември" #: standalone/drakbackup:2077 #, c-format msgid "Sunday" msgstr "неделя" #: standalone/drakbackup:2077 #, c-format msgid "Monday" msgstr "понеделник" #: standalone/drakbackup:2077 #, c-format msgid "Tuesday" msgstr "Вторник" #: standalone/drakbackup:2078 #, c-format msgid "Wednesday" msgstr "сряда" #: standalone/drakbackup:2078 #, c-format msgid "Thursday" msgstr "Четвъртък" #: standalone/drakbackup:2078 #, c-format msgid "Friday" msgstr "петък" #: standalone/drakbackup:2078 #, c-format msgid "Saturday" msgstr "Събота" #: standalone/drakbackup:2110 #, c-format msgid "Use daemon" msgstr "Използва демон" #: standalone/drakbackup:2114 #, c-format msgid "Please choose the time interval between each backup" msgstr "Моля изберете интервал между всяко архивиране" #: standalone/drakbackup:2120 #, c-format msgid "Custom setup/crontab entry:" msgstr "" #: standalone/drakbackup:2125 #, c-format msgid "Minute" msgstr "Минута" #: standalone/drakbackup:2129 #, c-format msgid "Hour" msgstr "Час" #: standalone/drakbackup:2133 #, c-format msgid "Day" msgstr "Ден" #: standalone/drakbackup:2137 #, c-format msgid "Month" msgstr "Месец" #: standalone/drakbackup:2141 #, c-format msgid "Weekday" msgstr "" #: standalone/drakbackup:2147 #, fuzzy, c-format msgid "Please choose the media for backup." msgstr "" "Моля, изберете\n" "носител за резервно копие." #: standalone/drakbackup:2153 #, fuzzy, c-format msgid "Please be sure that the cron daemon is included in your services." msgstr "Моля, изберете всички потребители,които желаете да включите в архива." #: standalone/drakbackup:2154 #, c-format msgid "" "If your machine is not on all the time, you might want to install anacron." msgstr "" #: standalone/drakbackup:2155 #, c-format msgid "Note that currently all 'net' media also use the hard drive." msgstr "" #: standalone/drakbackup:2202 #, fuzzy, c-format msgid "Please choose the compression type" msgstr "моля, изберете датата за възстановяване" #: standalone/drakbackup:2206 #, c-format msgid "Use .backupignore files" msgstr "Използва .backupignore файлове" #: standalone/drakbackup:2208 #, c-format msgid "Send mail report after each backup to:" msgstr "" #: standalone/drakbackup:2214 #, c-format msgid "Return address for sent mail:" msgstr "" #: standalone/drakbackup:2220 #, fuzzy, c-format msgid "SMTP server for mail:" msgstr "Хост на SMB сървър" #: standalone/drakbackup:2225 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "" #: standalone/drakbackup:2268 #, c-format msgid "What" msgstr "Какво" #: standalone/drakbackup:2273 #, c-format msgid "Where" msgstr "Къде" #: standalone/drakbackup:2278 #, c-format msgid "When" msgstr "Кога" #: standalone/drakbackup:2283 #, c-format msgid "More Options" msgstr "Допълнителни опции" #: standalone/drakbackup:2296 #, fuzzy, c-format msgid "Backup destination not configured..." msgstr "Функционалността на мрежата не е настроена" #: standalone/drakbackup:2316 standalone/drakbackup:4240 #, c-format msgid "Drakbackup Configuration" msgstr "Drakbackup Конфигурация" #: standalone/drakbackup:2332 #, c-format msgid "Please choose where you want to backup" msgstr "Моля, изберете къде ще желаете да архивирате" #: standalone/drakbackup:2335 #, c-format msgid "Hard Drive used to prepare backups for all media" msgstr "" #: standalone/drakbackup:2335 #, c-format msgid "Across Network" msgstr "" #: standalone/drakbackup:2335 #, c-format msgid "On CD-R" msgstr "" #: standalone/drakbackup:2335 #, c-format msgid "On Tape Device" msgstr "" #: standalone/drakbackup:2381 #, c-format msgid "Backup Users" msgstr "Резервно копие на потребители" #: standalone/drakbackup:2382 #, fuzzy, c-format msgid " (Default is all users)" msgstr "Потребител по подразбиране" #: standalone/drakbackup:2395 #, c-format msgid "Please choose what you want to backup" msgstr "Моля изберете какво искате да запазите" #: standalone/drakbackup:2396 #, c-format msgid "Backup System" msgstr "Система за съхранение" #: standalone/drakbackup:2398 #, c-format msgid "Select user manually" msgstr "Избира потребители ръчно" #: standalone/drakbackup:2427 #, c-format msgid "Please select data to backup..." msgstr "Моля, изберете данни за резервно копие..." #: standalone/drakbackup:2499 #, c-format msgid "" "\n" "Backup Sources: \n" msgstr "" "\n" "Източник за резервно копие: \n" #: standalone/drakbackup:2500 #, c-format msgid "" "\n" "- System Files:\n" msgstr "" "\n" "- Системни файлове:\n" #: standalone/drakbackup:2502 #, c-format msgid "" "\n" "- User Files:\n" msgstr "" #: standalone/drakbackup:2504 #, c-format msgid "" "\n" "- Other Files:\n" msgstr "" #: standalone/drakbackup:2506 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" #: standalone/drakbackup:2507 #, c-format msgid "\tLimit disk usage to %s MB\n" msgstr "" #: standalone/drakbackup:2508 #, c-format msgid "\tDelete backups older than %s day(s)\n" msgstr "" #: standalone/drakbackup:2511 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" #: standalone/drakbackup:2516 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" #: standalone/drakbackup:2517 #, c-format msgid "RW" msgstr "RW" #: standalone/drakbackup:2518 #, c-format msgid " on device: %s" msgstr " на устройство: %s" #: standalone/drakbackup:2519 #, c-format msgid " (multi-session)" msgstr "" #: standalone/drakbackup:2520 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" #: standalone/drakbackup:2521 #, c-format msgid "\t\tErase=%s" msgstr "\t\tИзтриване=%s" #: standalone/drakbackup:2523 #, c-format msgid "\tBackup directly to Tape\n" msgstr "" #: standalone/drakbackup:2525 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" #: standalone/drakbackup:2526 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" #: standalone/drakbackup:2527 #, c-format msgid "" "\n" "- Options:\n" msgstr "" "\n" "- Опции:\n" #: standalone/drakbackup:2528 #, c-format msgid "\tDo not include System Files\n" msgstr "" #: standalone/drakbackup:2530 #, c-format msgid "\tBackups use tar and bzip2\n" msgstr "" #: standalone/drakbackup:2531 #, c-format msgid "\tBackups use tar and gzip\n" msgstr "" #: standalone/drakbackup:2532 #, fuzzy, c-format msgid "\tBackups use tar only\n" msgstr "Резервно копие на потребителски файлове" #: standalone/drakbackup:2534 #, c-format msgid "\tUse .backupignore files\n" msgstr "\tИзползва .backupignore файлове\n" #: standalone/drakbackup:2535 #, c-format msgid "\tSend mail to %s\n" msgstr "" #: standalone/drakbackup:2536 #, c-format msgid "\tSend mail from %s\n" msgstr "" #: standalone/drakbackup:2537 #, fuzzy, c-format msgid "\tUsing SMTP server %s\n" msgstr "На CUPS сървър \"%s\"" #: standalone/drakbackup:2539 #, c-format msgid "" "\n" "- Daemon, %s via:\n" msgstr "" #: standalone/drakbackup:2540 #, c-format msgid "\t-Hard drive.\n" msgstr "" #: standalone/drakbackup:2541 #, c-format msgid "\t-CD-R.\n" msgstr "" #: standalone/drakbackup:2542 #, c-format msgid "\t-Tape \n" msgstr "" #: standalone/drakbackup:2543 #, c-format msgid "\t-Network by FTP.\n" msgstr "" #: standalone/drakbackup:2544 #, c-format msgid "\t-Network by SSH.\n" msgstr "" #: standalone/drakbackup:2545 #, c-format msgid "\t-Network by rsync.\n" msgstr "" #: standalone/drakbackup:2547 #, c-format msgid "No configuration, please click Wizard or Advanced.\n" msgstr "" #: standalone/drakbackup:2552 #, c-format msgid "" "List of data to restore:\n" "\n" msgstr "" "Списък на данни за възстановяване:\n" "\n" #: standalone/drakbackup:2554 #, fuzzy, c-format msgid "- Restore System Files.\n" msgstr "" "\n" "- Системни файлове:\n" #: standalone/drakbackup:2556 standalone/drakbackup:2566 #, c-format msgid " - from date: %s %s\n" msgstr "" #: standalone/drakbackup:2559 #, fuzzy, c-format msgid "- Restore User Files: \n" msgstr "Възстанови Потребители" #: standalone/drakbackup:2564 #, fuzzy, c-format msgid "- Restore Other Files: \n" msgstr "Възстанови други" #: standalone/drakbackup:2743 #, c-format msgid "" "List of data corrupted:\n" "\n" msgstr "" #: standalone/drakbackup:2745 #, c-format msgid "Please uncheck or remove it on next time." msgstr "Моля махнете отметката или го изтрийте следващия път." #: standalone/drakbackup:2755 #, c-format msgid "Backup files are corrupted" msgstr "" #: standalone/drakbackup:2776 #, c-format msgid " All of your selected data have been " msgstr "" #: standalone/drakbackup:2777 #, c-format msgid " Successfully Restored on %s " msgstr "" #: standalone/drakbackup:2897 #, c-format msgid " Restore Configuration " msgstr " Конфигурация за възстановяване " #: standalone/drakbackup:2925 #, c-format msgid "OK to restore the other files." msgstr "OK за възстановяване на други файлове." #: standalone/drakbackup:2941 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "" #: standalone/drakbackup:3006 #, fuzzy, c-format msgid "Please choose the date to restore:" msgstr "моля, изберете датата за възстановяване" #: standalone/drakbackup:3043 #, c-format msgid "Restore from Hard Disk." msgstr "Възстановява от твърд диск." #: standalone/drakbackup:3045 #, c-format msgid "Enter the directory where backups are stored" msgstr "Моля веведете директорията за запазване на архивите:" #: standalone/drakbackup:3049 #, c-format msgid "Directory with backups" msgstr "" #: standalone/drakbackup:3103 #, c-format msgid "Select another media to restore from" msgstr "Изберете друг носител за възстановяване от него" #: standalone/drakbackup:3105 #, c-format msgid "Other Media" msgstr "Друг носител" #: standalone/drakbackup:3110 #, c-format msgid "Restore system" msgstr "Система за възстановяване" #: standalone/drakbackup:3111 #, c-format msgid "Restore Users" msgstr "Възстанови Потребители" #: standalone/drakbackup:3112 #, c-format msgid "Restore Other" msgstr "Възстанови други" #: standalone/drakbackup:3114 #, c-format msgid "Select path to restore (instead of /)" msgstr "избор на път за възстановяване (вместо /)" #: standalone/drakbackup:3118 standalone/drakbackup:3400 #, fuzzy, c-format msgid "Path To Restore To" msgstr "Потребителско възстановяване" #: standalone/drakbackup:3121 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "" #: standalone/drakbackup:3123 #, c-format msgid "Remove user directories before restore." msgstr "" #: standalone/drakbackup:3208 #, c-format msgid "Filename text substring to search for (empty string matches all):" msgstr "" #: standalone/drakbackup:3211 #, c-format msgid "Search Backups" msgstr "" #: standalone/drakbackup:3229 #, fuzzy, c-format msgid "No matches found..." msgstr "Не е намерен образ" #: standalone/drakbackup:3233 #, c-format msgid "Restore Selected" msgstr "Възстановява избраните" #: standalone/drakbackup:3368 #, c-format msgid "" "Click date/time to see backup files.\n" "Ctrl-Click files to select multiple files." msgstr "" #: standalone/drakbackup:3374 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" #: standalone/drakbackup:3383 #, c-format msgid "" "Restore Selected\n" "Files" msgstr "" "Възстановява избраните\n" "файлове" #: standalone/drakbackup:3460 #, c-format msgid "Backup files not found at %s." msgstr "" #: standalone/drakbackup:3473 #, c-format msgid "Restore From CD" msgstr "Възстановява от CD" #: standalone/drakbackup:3473 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" #: standalone/drakbackup:3475 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "" #: standalone/drakbackup:3485 #, c-format msgid "Restore From Tape" msgstr "Възстановява от лента" #: standalone/drakbackup:3485 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" #: standalone/drakbackup:3487 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "Етикетът на лентата не е правилния. Лентата се казва %s." #: standalone/drakbackup:3498 #, c-format msgid "Restore Via Network" msgstr "Възстановява през мрежа" #: standalone/drakbackup:3498 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "" #: standalone/drakbackup:3499 #, c-format msgid "Host Name" msgstr "Име на хост" #: standalone/drakbackup:3500 #, c-format msgid "Host Path or Module" msgstr "" #: standalone/drakbackup:3507 #, c-format msgid "Password required" msgstr "Изисква парола" #: standalone/drakbackup:3513 #, c-format msgid "Username required" msgstr "Изисква потребителско име" #: standalone/drakbackup:3516 #, c-format msgid "Hostname required" msgstr "Изисква име на машина" #: standalone/drakbackup:3521 #, c-format msgid "Path or Module required" msgstr "" #: standalone/drakbackup:3534 #, c-format msgid "Files Restored..." msgstr "" #: standalone/drakbackup:3537 #, c-format msgid "Restore Failed..." msgstr "Възстановяването пропадна..." #: standalone/drakbackup:3555 #, fuzzy, c-format msgid "%s not retrieved..." msgstr "%s не е намерен...\n" #: standalone/drakbackup:3776 standalone/drakbackup:3845 #, c-format msgid "Search for files to restore" msgstr "Търсене на файлове за възстановяване" #: standalone/drakbackup:3780 #, c-format msgid "Restore all backups" msgstr "" #: standalone/drakbackup:3788 #, c-format msgid "Custom Restore" msgstr "Потребителско възстановяване" #: standalone/drakbackup:3792 standalone/drakbackup:3841 #, c-format msgid "Restore From Catalog" msgstr "Възстановява от каталог" #: standalone/drakbackup:3813 #, c-format msgid "Unable to find backups to restore...\n" msgstr "Не мога да намеря архив за възстановяване...\n" #: standalone/drakbackup:3814 #, fuzzy, c-format msgid "Verify that %s is the correct path" msgstr "Всичко правилно ли е ?" #: standalone/drakbackup:3815 #, c-format msgid " and the CD is in the drive" msgstr "" #: standalone/drakbackup:3817 #, c-format msgid "Backups on unmountable media - Use Catalog to restore" msgstr "" #: standalone/drakbackup:3833 #, c-format msgid "CD in place - continue." msgstr "" #: standalone/drakbackup:3838 #, c-format msgid "Browse to new restore repository." msgstr "" #: standalone/drakbackup:3839 #, fuzzy, c-format msgid "Directory To Restore From" msgstr "Възстановява от CD" #: standalone/drakbackup:3875 #, c-format msgid "Restore Progress" msgstr "Прогрес на възстановяване" #: standalone/drakbackup:3986 #, c-format msgid "Build Backup" msgstr "Създаване на архив" #: standalone/drakbackup:4019 standalone/drakbackup:4339 #, c-format msgid "Restore" msgstr "Възстановява" #: standalone/drakbackup:4134 #, c-format msgid "Please select data to restore..." msgstr "Моля, изберете данни за възстановяване..." #: standalone/drakbackup:4174 #, c-format msgid "Backup system files" msgstr "Резервно копие на системни файлове" #: standalone/drakbackup:4177 #, c-format msgid "Backup user files" msgstr "Резервно копие на потребителски файлове" #: standalone/drakbackup:4180 #, c-format msgid "Backup other files" msgstr "Резервно копие на други файлове" #: standalone/drakbackup:4183 standalone/drakbackup:4217 #, c-format msgid "Total Progress" msgstr "" #: standalone/drakbackup:4209 #, c-format msgid "Sending files by FTP" msgstr "Изпращам файлове по FTP..." #: standalone/drakbackup:4212 #, c-format msgid "Sending files..." msgstr "Изпращам файлове..." #: standalone/drakbackup:4282 #, c-format msgid "Backup Now from configuration file" msgstr "Архивиране от конфигурационен файл" #: standalone/drakbackup:4287 #, c-format msgid "View Backup Configuration." msgstr "Преглед на Конфигурация за резервно копие." #: standalone/drakbackup:4313 #, c-format msgid "Wizard Configuration" msgstr "Конфигурация на Магьосник" #: standalone/drakbackup:4318 #, c-format msgid "Advanced Configuration" msgstr "Допълнителна конфигурация" #: standalone/drakbackup:4323 #, c-format msgid "View Configuration" msgstr "Преглед на настройките" #: standalone/drakbackup:4327 #, c-format msgid "View Last Log" msgstr "" #: standalone/drakbackup:4332 #, c-format msgid "Backup Now" msgstr "Резервно копие сега" #: standalone/drakbackup:4336 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" #: standalone/drakbackup:4356 standalone/drakbackup:4359 #, c-format msgid "Drakbackup" msgstr "" #: standalone/drakboot:49 #, c-format msgid "No bootloader found, creating a new configuration" msgstr "" #: standalone/drakboot:84 standalone/harddrake2:190 standalone/harddrake2:191 #: standalone/harddrake2:192 standalone/logdrake:69 #: standalone/printerdrake:150 standalone/printerdrake:151 #: standalone/printerdrake:152 #, c-format msgid "/_File" msgstr "/_Файл" #: standalone/drakboot:85 standalone/logdrake:75 #, c-format msgid "/File/_Quit" msgstr "/Файл/_Излиза" #: standalone/drakboot:85 standalone/harddrake2:192 standalone/logdrake:75 #: standalone/printerdrake:152 #, c-format msgid "Q" msgstr "Q" #: standalone/drakboot:125 #, c-format msgid "Text only" msgstr "" #: standalone/drakboot:126 #, c-format msgid "Verbose" msgstr "" #: standalone/drakboot:127 #, c-format msgid "Silent" msgstr "Мълчалив" #: standalone/drakboot:134 #, c-format msgid "" "Your system bootloader is not in framebuffer mode. To activate graphical " "boot, select a graphic video mode from the bootloader configuration tool." msgstr "" #: standalone/drakboot:135 #, fuzzy, c-format msgid "Do you want to configure it now?" msgstr "Искате ли да тествате настройките?" #: standalone/drakboot:144 #, c-format msgid "Install themes" msgstr "Инсталиране на теми" #: standalone/drakboot:146 #, fuzzy, c-format msgid "Graphical boot theme selection" msgstr "Избор модел на принтера" #: standalone/drakboot:149 #, fuzzy, c-format msgid "Graphical boot mode:" msgstr "Избор модел на принтера" #: standalone/drakboot:151 #, c-format msgid "Theme" msgstr "Тема" #: standalone/drakboot:154 #, c-format msgid "" "Display theme\n" "under console" msgstr "" "Показва тема\n" "на конзола" #: standalone/drakboot:159 #, c-format msgid "Create new theme" msgstr "Създава нова тема" #: standalone/drakboot:191 #, c-format msgid "Default user" msgstr "Потребител по подразбиране" #: standalone/drakboot:192 #, c-format msgid "Default desktop" msgstr "Подразбиращо се работно място" #: standalone/drakboot:195 #, c-format msgid "No, I do not want autologin" msgstr "Не, не искам autologin" #: standalone/drakboot:196 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "Да, искам autologin с това (потребител, десктоп)" #: standalone/drakboot:203 #, c-format msgid "System mode" msgstr "Системен режим" #: standalone/drakboot:206 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "Пусни X-Window системата при стартиране" #: standalone/drakboot:272 #, c-format msgid "" "Please choose a video mode, it will be applied to each of the boot entries " "selected below.\n" "Be sure your video card supports the mode you choose." msgstr "" #: standalone/drakbug:41 #, fuzzy, c-format msgid "Mandriva Linux Bug Report Tool" msgstr "Контролен център на Mandriva Linux" #: standalone/drakbug:46 #, c-format msgid "Mandriva Linux Control Center" msgstr "Контролен център на Mandriva Linux" #: standalone/drakbug:48 #, c-format msgid "Synchronization tool" msgstr "" #: standalone/drakbug:49 standalone/drakbug:152 #, c-format msgid "Standalone Tools" msgstr "Самостоятелни инструменти" #: standalone/drakbug:50 #, c-format msgid "HardDrake" msgstr "ХардДрейк" #: standalone/drakbug:51 #, c-format msgid "Mandriva Online" msgstr "Mandriva Online" #: standalone/drakbug:52 #, c-format msgid "Menudrake" msgstr "Menudrake" #: standalone/drakbug:53 #, c-format msgid "Msec" msgstr "Мсек" #: standalone/drakbug:54 #, c-format msgid "Remote Control" msgstr "Отдалечен контрол" #: standalone/drakbug:55 #, c-format msgid "Software Manager" msgstr "Софтуерен мениджър" #: standalone/drakbug:56 #, c-format msgid "Urpmi" msgstr "" #: standalone/drakbug:57 #, c-format msgid "Windows Migration tool" msgstr "" #: standalone/drakbug:58 standalone/draksambashare:1230 #, c-format msgid "Userdrake" msgstr "Userdrake" #: standalone/drakbug:59 #, c-format msgid "Configuration Wizards" msgstr "Конфигурационни Магьосници" #: standalone/drakbug:81 #, c-format msgid "Select Mandriva Tool:" msgstr "" #: standalone/drakbug:82 #, c-format msgid "" "or Application Name\n" "(or Full Path):" msgstr "" #: standalone/drakbug:85 #, c-format msgid "Find Package" msgstr "Търсене на пакет" #: standalone/drakbug:87 #, c-format msgid "Package: " msgstr "Пакет: " #: standalone/drakbug:88 #, c-format msgid "Kernel:" msgstr "Ядро:" #: standalone/drakbug:101 #, c-format msgid "" "To submit a bug report, click on the report button. \n" "This will open a web browser window on %s where you'll find a form to fill " "in. The information displayed above will be transferred to that server. \n" "Things useful to include in your report are the output of lspci, kernel " "version, and /proc/cpuinfo." msgstr "" #: standalone/drakbug:107 #, c-format msgid "Report" msgstr "Рапорт" #: standalone/drakbug:162 #, c-format msgid "Not installed" msgstr "Не е инсталиран" #: standalone/drakbug:174 #, c-format msgid "Package not installed" msgstr "Пакета не е инсталиран" #: standalone/drakclock:29 #, c-format msgid "DrakClock" msgstr "Дракчасовник" #: standalone/drakclock:39 #, fuzzy, c-format msgid "not defined" msgstr "не е конфигуриран" #: standalone/drakclock:41 #, fuzzy, c-format msgid "Change Time Zone" msgstr "Часова зона" #: standalone/drakclock:45 #, c-format msgid "Timezone - DrakClock" msgstr "Времеви пояс - Дракчасовник" #: standalone/drakclock:47 #, c-format msgid "GMT - DrakClock" msgstr "GMT - Дракчасовник" #: standalone/drakclock:47 #, c-format msgid "Is your hardware clock set to GMT?" msgstr "Хардуерният ви часовник настроен ли е по GMT?" #: standalone/drakclock:75 #, fuzzy, c-format msgid "Network Time Protocol" msgstr "Мрежов интерфейс" #: standalone/drakclock:77 #, c-format msgid "" "Your computer can synchronize its clock\n" " with a remote time server using NTP" msgstr "" #: standalone/drakclock:78 #, c-format msgid "Enable Network Time Protocol" msgstr "" #: standalone/drakclock:86 #, c-format msgid "Server:" msgstr "Сървър:" #: standalone/drakclock:124 #, c-format msgid "Could not synchronize with %s." msgstr "" #: standalone/drakclock:146 standalone/drakclock:156 #, c-format msgid "Reset" msgstr "Анулиране" #: standalone/drakclock:224 #, fuzzy, c-format msgid "" "We need to install ntp package\n" " to enable Network Time Protocol\n" "\n" "Do you want to install ntp?" msgstr "" "Пакет %s трябва да бъде инсталиран\n" "Искате да го инсталирате?" #: standalone/drakconnect:80 #, c-format msgid "Network configuration (%d adapters)" msgstr "Настройка на мрежата (%d адаптера)" #: standalone/drakconnect:89 standalone/drakconnect:807 #, c-format msgid "Gateway:" msgstr "Gateway:" #: standalone/drakconnect:89 standalone/drakconnect:807 #, c-format msgid "Interface:" msgstr "Интерфейс:" #: standalone/drakconnect:93 standalone/net_monitor:116 #, c-format msgid "Wait please" msgstr "" #: standalone/drakconnect:109 #, c-format msgid "Interface" msgstr "Интерфейс" #: standalone/drakconnect:109 standalone/printerdrake:224 #: standalone/printerdrake:231 #, c-format msgid "State" msgstr "Състояние" #: standalone/drakconnect:126 #, c-format msgid "Hostname: " msgstr "Име на хост: " #: standalone/drakconnect:128 #, c-format msgid "Configure hostname..." msgstr "Настройка на име на хост..." #: standalone/drakconnect:142 standalone/drakconnect:845 #, c-format msgid "LAN configuration" msgstr "Настройка на LAN" #: standalone/drakconnect:147 #, c-format msgid "Configure Local Area Network..." msgstr "Настойка на локална мрежа ..." #: standalone/drakconnect:155 standalone/drakconnect:237 #: standalone/drakconnect:241 #, c-format msgid "Apply" msgstr "Приложи" #: standalone/drakconnect:188 #, c-format msgid "Manage connections" msgstr "Настройка на връзките" #: standalone/drakconnect:215 #, fuzzy, c-format msgid "Device selected" msgstr "Изтриване на оизбраните" #: standalone/drakconnect:296 #, fuzzy, c-format msgid "IP configuration" msgstr "CUPS конфигурация" #: standalone/drakconnect:335 #, fuzzy, c-format msgid "DNS servers" msgstr "DNS сървър" #: standalone/drakconnect:343 #, fuzzy, c-format msgid "Search Domain" msgstr "NIS домейн" #: standalone/drakconnect:351 #, fuzzy, c-format msgid "static" msgstr "Автоматичен IP адрес" #: standalone/drakconnect:351 #, c-format msgid "DHCP" msgstr "DHCP" #: standalone/drakconnect:515 #, c-format msgid "Flow control" msgstr "Контрол на трансфера" #: standalone/drakconnect:516 #, fuzzy, c-format msgid "Line termination" msgstr "Интернет станция" #: standalone/drakconnect:527 #, fuzzy, c-format msgid "Modem timeout" msgstr "Шел време за достъп" #: standalone/drakconnect:531 #, fuzzy, c-format msgid "Use lock file" msgstr "Изберете файл" #: standalone/drakconnect:533 #, c-format msgid "Wait for dialup tone before dialing" msgstr "" #: standalone/drakconnect:536 #, fuzzy, c-format msgid "Busy wait" msgstr "Кувейт" #: standalone/drakconnect:541 #, fuzzy, c-format msgid "Modem sound" msgstr "Модем" #: standalone/drakconnect:542 standalone/drakgw:105 #, c-format msgid "Enable" msgstr "Включване" #: standalone/drakconnect:542 standalone/drakgw:105 #, c-format msgid "Disable" msgstr "Изключване" #: standalone/drakconnect:593 standalone/harddrake2:50 #, c-format msgid "Media class" msgstr "Клас носител" #: standalone/drakconnect:594 #, c-format msgid "Module name" msgstr "Име на модул" #: standalone/drakconnect:595 #, fuzzy, c-format msgid "Mac Address" msgstr "Broadcast адрес:" #: standalone/drakconnect:596 standalone/harddrake2:28 #: standalone/harddrake2:120 #, c-format msgid "Bus" msgstr "Шина" #: standalone/drakconnect:597 standalone/harddrake2:34 #, c-format msgid "Location on the bus" msgstr "" #: standalone/drakconnect:700 standalone/drakgw:311 #, c-format msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "В системата не е открит ethernet мрежов адаптер. Моля, стартирайте " "инструмента за настройка на хардуер." #: standalone/drakconnect:708 #, fuzzy, c-format msgid "Remove a network interface" msgstr "Изберете мрежов интерфейс" #: standalone/drakconnect:712 #, fuzzy, c-format msgid "Select the network interface to remove:" msgstr "Изберете мрежов интерфейс" #: standalone/drakconnect:744 #, fuzzy, c-format msgid "" "An error occurred while deleting the \"%s\" network interface:\n" "\n" "%s" msgstr "" "Изникна проблем при рестартирането на мрежата:\n" "\n" "%s" #: standalone/drakconnect:745 #, c-format msgid "" "Congratulations, the \"%s\" network interface has been successfully deleted" msgstr "" #: standalone/drakconnect:761 #, c-format msgid "No IP" msgstr "" #: standalone/drakconnect:762 #, c-format msgid "No Mask" msgstr "Лоша маска" #: standalone/drakconnect:763 standalone/drakconnect:916 #, c-format msgid "up" msgstr "" #: standalone/drakconnect:763 standalone/drakconnect:916 #, fuzzy, c-format msgid "down" msgstr "готово" #: standalone/drakconnect:798 standalone/net_monitor:465 #, c-format msgid "Connected" msgstr "Свързан" #: standalone/drakconnect:798 standalone/net_monitor:465 #, c-format msgid "Not connected" msgstr "Не свързан" #: standalone/drakconnect:800 #, c-format msgid "Disconnect..." msgstr "Отвързване ..." #: standalone/drakconnect:800 #, c-format msgid "Connect..." msgstr "Свързване ..." #: standalone/drakconnect:841 #, fuzzy, c-format msgid "Deactivate now" msgstr "деактивирай сега" #: standalone/drakconnect:841 #, fuzzy, c-format msgid "Activate now" msgstr "активирай сега" #: standalone/drakconnect:849 #, c-format msgid "" "You do not have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "Нямате настроен интерфейс.\n" "Настройте ги преди това, като цъкнете на 'Настройка'" #: standalone/drakconnect:863 #, c-format msgid "LAN Configuration" msgstr "Настройка на локална мрежа" #: standalone/drakconnect:875 #, c-format msgid "Adapter %s: %s" msgstr "Адаптер %s: %s" #: standalone/drakconnect:884 #, c-format msgid "Boot Protocol" msgstr "Стартиращ протокол" #: standalone/drakconnect:885 #, c-format msgid "Started on boot" msgstr "Пуснат при стартиране" #: standalone/drakconnect:921 #, c-format msgid "" "This interface has not been configured yet.\n" "Run the \"Add an interface\" assistant from the Mandriva Linux Control Center" msgstr "" #: standalone/drakconnect:975 standalone/net_applet:51 #, fuzzy, c-format msgid "" "You do not have any configured Internet connection.\n" "Run the \"%s\" assistant from the Mandriva Linux Control Center" msgstr "" "Нямате Internet връзка.\n" "Създайте такава, като цъкнете на 'Настрой'" #. -PO: here "Add Connection" should be translated the same was as in control-center #: standalone/drakconnect:976 standalone/drakroam:34 standalone/net_applet:52 #, fuzzy, c-format msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)" msgstr "Изберете мрежов интерфейс" #: standalone/drakconnect:981 #, c-format msgid "Internet connection configuration" msgstr "Настройка на Интернет връзка" #: standalone/drakconnect:994 #, fuzzy, c-format msgid "Third DNS server (optional)" msgstr "Първи DNS сървър (по избор)" #: standalone/drakconnect:1016 #, c-format msgid "Internet Connection Configuration" msgstr "Настройка на Интернет връзка" #: standalone/drakconnect:1017 #, c-format msgid "Internet access" msgstr "Интернет достъп" #: standalone/drakconnect:1019 standalone/net_monitor:95 #, c-format msgid "Connection type: " msgstr "Тип на връзката: " #: standalone/drakconnect:1022 #, c-format msgid "Status:" msgstr "Състояние:" #: standalone/drakedm:40 #, c-format msgid "GDM (GNOME Display Manager)" msgstr "" #: standalone/drakedm:41 #, c-format msgid "KDM (KDE Display Manager)" msgstr "" #: standalone/drakedm:42 #, fuzzy, c-format msgid "XDM (X Display Manager)" msgstr "Избор на мениджър на дисплей" #: standalone/drakedm:53 #, c-format msgid "Choosing a display manager" msgstr "Избор на мениджър на дисплей" #: standalone/drakedm:54 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" #: standalone/drakedm:72 #, c-format msgid "The change is done, do you want to restart the dm service?" msgstr "Промяната е направена.Желаете ли да рестартирате dm услугата?" #: standalone/drakedm:73 #, c-format msgid "" "You are going to close all running programs and lose your current session. " "Are you really sure that you want to restart the dm service?" msgstr "" #: standalone/drakfont:183 #, c-format msgid "Search installed fonts" msgstr "" #: standalone/drakfont:185 #, c-format msgid "Unselect fonts installed" msgstr "" #: standalone/drakfont:208 #, c-format msgid "parse all fonts" msgstr "" #: standalone/drakfont:210 #, fuzzy, c-format msgid "No fonts found" msgstr "няма намерени шрифтове" #: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327 #: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394 #: standalone/drakfont:412 standalone/drakfont:426 #, c-format msgid "done" msgstr "готово" #: standalone/drakfont:223 #, c-format msgid "Could not find any font in your mounted partitions" msgstr "" #: standalone/drakfont:258 #, c-format msgid "Reselect correct fonts" msgstr "" #: standalone/drakfont:261 #, fuzzy, c-format msgid "Could not find any font.\n" msgstr "Не сте избрали никакъв шрифт" #: standalone/drakfont:271 #, c-format msgid "Search for fonts in installed list" msgstr "" #: standalone/drakfont:296 #, c-format msgid "%s fonts conversion" msgstr "" #: standalone/drakfont:325 #, c-format msgid "Fonts copy" msgstr "Копира шрифтове" #: standalone/drakfont:328 #, c-format msgid "True Type fonts installation" msgstr "Инсталиране на True Type шрифтове" #: standalone/drakfont:335 #, c-format msgid "please wait during ttmkfdir..." msgstr "" #: standalone/drakfont:336 #, c-format msgid "True Type install done" msgstr "" #: standalone/drakfont:342 standalone/drakfont:357 #, c-format msgid "type1inst building" msgstr "" #: standalone/drakfont:351 #, c-format msgid "Ghostscript referencing" msgstr "" #: standalone/drakfont:361 #, c-format msgid "Suppress Temporary Files" msgstr "" #: standalone/drakfont:364 #, c-format msgid "Restart XFS" msgstr "Рестартира XFS" #: standalone/drakfont:410 standalone/drakfont:420 #, c-format msgid "Suppress Fonts Files" msgstr "" #: standalone/drakfont:422 #, c-format msgid "xfs restart" msgstr "xfs рестартира" #: standalone/drakfont:430 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" #: standalone/drakfont:474 standalone/drakfont:483 #, c-format msgid "DrakFont" msgstr "" #: standalone/drakfont:484 #, c-format msgid "Font List" msgstr "Списък шрифтове" #: standalone/drakfont:490 #, c-format msgid "About" msgstr "Относно" #: standalone/drakfont:492 standalone/drakfont:687 standalone/drakfont:725 #, c-format msgid "Uninstall" msgstr "Деинсталиране" #: standalone/drakfont:493 #, c-format msgid "Import" msgstr "Импорт" #: standalone/drakfont:494 #, c-format msgid "Get Windows Fonts" msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/drakfont:512 #, c-format msgid "" "Copyright (C) 2001-2002 by Mandriva \n" "\n" "\n" " DUPONT Sebastien (original version)\n" "\n" " CHAUMETTE Damien \n" "\n" " VIGNAUD Thierry " msgstr "" #: standalone/drakfont:521 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA." msgstr "" #: standalone/drakfont:537 #, c-format msgid "" "Thanks:\n" "\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" "\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" "\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" msgstr "" #: standalone/drakfont:556 #, c-format msgid "Choose the applications that will support the fonts:" msgstr "Изберете приложенията които ще поддържат шрифтовете:" #: standalone/drakfont:557 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" #: standalone/drakfont:567 #, c-format msgid "Ghostscript" msgstr "Ghostscript" #: standalone/drakfont:568 #, c-format msgid "StarOffice" msgstr "StarOffice" #: standalone/drakfont:569 #, c-format msgid "Abiword" msgstr "Abiword" #: standalone/drakfont:570 #, c-format msgid "Generic Printers" msgstr "Принтер без драйвери" #: standalone/drakfont:584 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "" #: standalone/drakfont:585 #, c-format msgid "File Selection" msgstr "Избор на файл" #: standalone/drakfont:589 #, c-format msgid "Fonts" msgstr "Шрифтове" #: standalone/drakfont:652 #, fuzzy, c-format msgid "Import fonts" msgstr "Импортирт на шрифтове" #: standalone/drakfont:657 #, fuzzy, c-format msgid "Install fonts" msgstr "Инсталира шрифтове" #: standalone/drakfont:692 #, c-format msgid "click here if you are sure." msgstr "" #: standalone/drakfont:694 #, c-format msgid "here if no." msgstr "" #: standalone/drakfont:733 #, c-format msgid "Unselected All" msgstr "" #: standalone/drakfont:736 #, c-format msgid "Selected All" msgstr "Избира всичко" #: standalone/drakfont:739 #, c-format msgid "Remove List" msgstr "Изтрива списък" #: standalone/drakfont:750 standalone/drakfont:769 #, fuzzy, c-format msgid "Importing fonts" msgstr "Импортирт на шрифтове" #: standalone/drakfont:754 standalone/drakfont:774 #, c-format msgid "Initial tests" msgstr "Начални тестове" #: standalone/drakfont:755 #, c-format msgid "Copy fonts on your system" msgstr "Копира шрифтове на вашата система" #: standalone/drakfont:756 #, c-format msgid "Install & convert Fonts" msgstr "" #: standalone/drakfont:757 #, c-format msgid "Post Install" msgstr "След инсталиране" #: standalone/drakfont:775 #, c-format msgid "Remove fonts on your system" msgstr "Изтрива шрифтове от вашата система" #: standalone/drakfont:776 #, c-format msgid "Post Uninstall" msgstr "След деинсталиране" #: standalone/drakgw:50 standalone/drakvpn:51 #, c-format msgid "Sorry, we support only 2.4 and above kernels." msgstr "" #: standalone/drakgw:75 #, c-format msgid "Internet Connection Sharing" msgstr "Споделяне на връзката с Интернет" #: standalone/drakgw:79 #, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "На път сте да настроите компютъра си така, че да поделя Интернет връзката\n" "си. С тази възможност, други компютри в локалната ви мрежа ще могат да\n" "използват Интернет връзката на този компютър.\n" "\n" "Убедете се, че вие сте конфигурирали вашата Мрежа/Интернет достъп " "използвайки drakconnect преди да правите друго.\n" "\n" "Отбележете: трябва ви отделен за това мрежов адаптер, за да установите " "вътрешната си мрежа (LAN)." #: standalone/drakgw:95 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "Установката на Споделянето на Интернет връзката е завършена.\n" "В момента е включена.\n" "\n" "Какво искате да направите ?" #: standalone/drakgw:99 #, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "Установката на Споделянето на Интернет връзката е вече завършена.\n" "В момента е изключена.\n" "\n" "Какво искате да направите ?" #: standalone/drakgw:105 #, fuzzy, c-format msgid "Reconfigure" msgstr "пренастройка" #: standalone/drakgw:145 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "В системата ви има само един настроен мрежов адаптер:\n" "\n" "%s\n" "\n" "Смятам да установя локалната ви мрежа на този адаптер." #: standalone/drakgw:156 #, c-format msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "" "Моля изберете кой мрежов адаптер да бъде включен към локалната ви мрежа." #: standalone/drakgw:177 #, fuzzy, c-format msgid "Local Area Network settings" msgstr "Адрес на Локална мрежа" #: standalone/drakgw:180 #, c-format msgid "Local IP address" msgstr "" #: standalone/drakgw:182 #, c-format msgid "The internal domain name" msgstr "Вътрешно име на домейн" #: standalone/drakgw:188 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "Възможен конфликт с адресите в LAN с настройката на %s!\n" #: standalone/drakgw:204 #, fuzzy, c-format msgid "Domain Name Server (DNS) configuration" msgstr "Конфигурация на Терминален Сървър в Mandriva Linux" #: standalone/drakgw:208 #, c-format msgid "Use this gateway as domain name server" msgstr "" #: standalone/drakgw:209 #, c-format msgid "The DNS Server IP" msgstr "DNS сървър IP" #: standalone/drakgw:236 #, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you do not know the meaning of an option, simply leave it as it is." msgstr "" #: standalone/drakgw:243 #, fuzzy, c-format msgid "Use automatic configuration (DHCP)" msgstr "Автоматична реконфигурация" #: standalone/drakgw:244 #, c-format msgid "The DHCP start range" msgstr "" #: standalone/drakgw:245 #, c-format msgid "The DHCP end range" msgstr "" #: standalone/drakgw:246 #, c-format msgid "The default lease (in seconds)" msgstr "" #: standalone/drakgw:247 #, c-format msgid "The maximum lease (in seconds)" msgstr "" #: standalone/drakgw:270 #, c-format msgid "Proxy caching server (SQUID)" msgstr "" #: standalone/drakgw:274 #, c-format msgid "Use this gateway as proxy caching server" msgstr "" #: standalone/drakgw:275 #, c-format msgid "Admin mail" msgstr "" #: standalone/drakgw:276 #, fuzzy, c-format msgid "Visible hostname" msgstr "Име на отдалечен хост" #: standalone/drakgw:277 #, fuzzy, c-format msgid "Proxy port" msgstr "Собственост" #: standalone/drakgw:278 #, fuzzy, c-format msgid "Cache size (MB)" msgstr "Размер на кеш" #: standalone/drakgw:300 #, fuzzy, c-format msgid "Broadcast printer information" msgstr "Информацията за твърдия диск" #: standalone/drakgw:317 #, c-format msgid "Internet Connection Sharing is now enabled." msgstr "Споделянето на Интернет в момента е включено." #: standalone/drakgw:323 #, c-format msgid "Internet Connection Sharing is now disabled." msgstr "Споделянето на Интернет връзката в момента е изключено." #: standalone/drakgw:329 #, fuzzy, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP) and\n" " a Transparent Proxy Cache server (SQUID)." msgstr "" "Всичко е настроено.\n" "Сега можете да споделите Интернет връзката си с други компютри в локалната " "ви мрежа използвайки автоматична мрежова настройка (DHCP)." #: standalone/drakgw:364 #, c-format msgid "Disabling servers..." msgstr "Изключване на сървъри ..." #: standalone/drakgw:378 #, c-format msgid "Firewalling configuration detected!" msgstr "Открита е настройка на Защитна Стена !" #: standalone/drakgw:379 #, c-format msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fixes after installation." msgstr "" "Внимание ! Открита е настройка на Защитна Стена. Може да се наложи някаква " "ръчна поправка след инсталацията." #: standalone/drakgw:384 #, c-format msgid "Configuring..." msgstr "Настройка ..." #: standalone/drakgw:385 #, c-format msgid "Configuring firewall..." msgstr "" #: standalone/drakhelp:17 #, c-format msgid "" " drakhelp 0.1\n" "Copyright (C) 2003-2005 Mandriva.\n" "This is free software and may be redistributed under the terms of the GNU " "GPL.\n" "\n" "Usage: \n" msgstr "" #: standalone/drakhelp:22 #, c-format msgid " --help - display this help \n" msgstr "" #: standalone/drakhelp:23 #, c-format msgid "" " --id - load the html help page which refers to id_label\n" msgstr "" #: standalone/drakhelp:24 #, c-format msgid "" " --doc - link to another web page ( for WM welcome " "frontend)\n" msgstr "" #: standalone/drakhelp:36 #, fuzzy, c-format msgid "Mandriva Linux Help Center" msgstr "Контролен център на Mandriva Linux" #: standalone/drakhelp:36 #, c-format msgid "" "%s cannot be displayed \n" ". No Help entry of this type\n" msgstr "" #: standalone/drakhosts:98 #, c-format msgid "Please add an host to be able to modify it." msgstr "" #: standalone/drakhosts:108 #, fuzzy, c-format msgid "Please modify information" msgstr "Подробна информация" #: standalone/drakhosts:109 #, fuzzy, c-format msgid "Please delete information" msgstr "Подробна информация" #: standalone/drakhosts:110 #, fuzzy, c-format msgid "Please add information" msgstr "Подробна информация" #: standalone/drakhosts:115 #, c-format msgid "IP address:" msgstr "Адрес IP:" #: standalone/drakhosts:116 #, c-format msgid "Host name:" msgstr "" #: standalone/drakhosts:117 #, c-format msgid "Host Aliases:" msgstr "" #: standalone/drakhosts:123 #, c-format msgid "Please enter a valid IP address." msgstr "Моля въведете валиден IP адрес." #: standalone/drakhosts:129 #, c-format msgid "Same IP is already in %s file." msgstr "" #: standalone/drakhosts:197 #, c-format msgid "Host Aliases" msgstr "" #: standalone/drakhosts:237 #, c-format msgid "DrakHOSTS manage hosts definitions" msgstr "" #: standalone/drakhosts:246 #, c-format msgid "Failed to add host." msgstr "" #: standalone/drakhosts:253 #, c-format msgid "Failed to Modify host." msgstr "" #: standalone/drakhosts:260 #, c-format msgid "Failed to remove host." msgstr "" #: standalone/drakids:26 #, fuzzy, c-format msgid "Allowed addresses" msgstr "Позволява на потребители" #: standalone/drakids:57 #, c-format msgid "Log" msgstr "Журнал" #: standalone/drakids:61 #, fuzzy, c-format msgid "Clear logs" msgstr "Изчисти всичко" #: standalone/drakids:62 standalone/drakids:67 standalone/net_applet:465 #, c-format msgid "Blacklist" msgstr "" #: standalone/drakids:63 standalone/drakids:80 standalone/net_applet:470 #, c-format msgid "Whitelist" msgstr "" #: standalone/drakids:71 #, fuzzy, c-format msgid "Remove from blacklist" msgstr "Премахни от LVM" #: standalone/drakids:72 #, c-format msgid "Move to whitelist" msgstr "" #: standalone/drakids:84 #, fuzzy, c-format msgid "Remove from whitelist" msgstr "Премахни от LVM" #: standalone/drakids:136 standalone/drakids:145 standalone/drakids:170 #: standalone/drakids:179 standalone/drakids:189 standalone/drakids:265 #: standalone/drakroam:182 standalone/net_applet:202 standalone/net_applet:380 #, fuzzy, c-format msgid "Unable to contact daemon" msgstr "Не мога да се свръжа с огледален сървър' %s" #: standalone/drakids:202 #, c-format msgid "Date" msgstr "Дата" #: standalone/drakids:203 #, fuzzy, c-format msgid "Attacker" msgstr "Без подробности" #: standalone/drakids:204 #, fuzzy, c-format msgid "Attack type" msgstr "тип: %s" #: standalone/drakids:205 #, c-format msgid "Service" msgstr "Услуга" #: standalone/drakids:206 standalone/net_applet:72 #, c-format msgid "Network interface" msgstr "Мрежов интерфейс" #: standalone/draknfs:41 #, c-format msgid "map root user as anonymous" msgstr "" #: standalone/draknfs:42 #, c-format msgid "map all users to anonymous user" msgstr "" #: standalone/draknfs:43 #, c-format msgid "No user UID mapping" msgstr "" #: standalone/draknfs:44 #, c-format msgid "allow real remote root access" msgstr "" #: standalone/draknfs:83 #, c-format msgid "NFS server" msgstr "" #: standalone/draknfs:83 #, c-format msgid "Restarting/Reloading NFS server..." msgstr "" #: standalone/draknfs:84 #, c-format msgid "Error Restarting/Reloading NFS server" msgstr "" #: standalone/draknfs:100 standalone/draksambashare:197 #, c-format msgid "Directory Selection" msgstr "" #: standalone/draknfs:105 standalone/draksambashare:202 #, c-format msgid "Should be a directory." msgstr "Трябва да е директория" #: standalone/draknfs:136 #, c-format msgid "" "NFS clients may be specified in a number of " "ways:\n" "\n" "\n" "single host: a host either by an " "abbreviated name recognized be the resolver, fully qualified domain name, or " "an IP address\n" "\n" "\n" "netgroups: NIS netgroups may be given " "as @group.\n" "\n" "\n" "wildcards: machine names may contain " "the wildcard characters * and ?. For instance: *.cs.foo.edu matches all " "hosts in the domain cs.foo.edu.\n" "\n" "\n" "IP networks: you can also export " "directories to all hosts on an IP (sub-)network simultaneously. for example, " "either `/255.255.252.0' or `/22' appended to the network base address " "result.\n" msgstr "" #: standalone/draknfs:151 #, c-format msgid "" "User ID options\n" "\n" "\n" "map root user as anonymous: map " "requests from uid/gid 0 to the anonymous uid/gid (root_squash).\n" "\n" "\n" "allow real remote root access: turn " "off root squashing. This option is mainly useful for diskless clients " "(no_root_squash).\n" "\n" "\n" "map all users to anonymous user: map " "all uids and gids to the anonymous user (all_squash). Useful for NFS-" "exported public FTP directories, news spool directories, etc. The opposite " "option is no user UID mapping (no_all_squash), which is the default " "setting.\n" "\n" "\n" "anonuid and anongid: explicitly set " "the uid and gid of the anonymous account.\n" msgstr "" #: standalone/draknfs:167 #, c-format msgid "Synchronous access:" msgstr "" #: standalone/draknfs:168 #, c-format msgid "Secured Connection:" msgstr "" #: standalone/draknfs:169 #, c-format msgid "Read-Only share:" msgstr "" #: standalone/draknfs:171 #, c-format msgid "Advanced Options" msgstr "" #: standalone/draknfs:172 #, c-format msgid "" "%s: this option requires that " "requests originate on an internet port less than IPPORT_RESERVED (1024). " "This option is on by default." msgstr "" #: standalone/draknfs:173 #, c-format msgid "" "%s: allow either only read or both " "read and write requests on this NFS volume. The default is to disallow any " "request which changes the filesystem. This can also be made explicit by " "using this option." msgstr "" #: standalone/draknfs:174 #, c-format msgid "" "%s: disallows the NFS server to " "violate the NFS protocol and to reply to requests before any changes made by " "these requests have been committed to stable storage (e.g. disc drive)." msgstr "" #: standalone/draknfs:306 #, c-format msgid "Please add an NFS share to be able to modify it." msgstr "" #: standalone/draknfs:378 #, fuzzy, c-format msgid "Advanced Options Help" msgstr "Допълнителна конфигурация" #: standalone/draknfs:389 #, c-format msgid "NFS directory" msgstr "" #: standalone/draknfs:391 standalone/draksambashare:588 #: standalone/draksambashare:767 #, c-format msgid "Directory:" msgstr "Директория:" #: standalone/draknfs:394 #, c-format msgid "Host access" msgstr "" #: standalone/draknfs:396 #, c-format msgid "Access:" msgstr "Достъп:" #: standalone/draknfs:396 #, c-format msgid "Hosts Access" msgstr "" #: standalone/draknfs:399 #, c-format msgid "User ID Mapping" msgstr "" #: standalone/draknfs:401 #, c-format msgid "User ID:" msgstr "Номер (UID):" #: standalone/draknfs:401 #, c-format msgid "Help User ID" msgstr "" #: standalone/draknfs:402 #, c-format msgid "Anonymous user ID:" msgstr "" #: standalone/draknfs:403 #, c-format msgid "Anonymous Group ID:" msgstr "" #: standalone/draknfs:444 #, c-format msgid "Can't create this directory." msgstr "" #: standalone/draknfs:447 #, c-format msgid "You must specify hosts access." msgstr "" #: standalone/draknfs:527 #, c-format msgid "Share Directory" msgstr "" #: standalone/draknfs:527 #, c-format msgid "Hosts Wildcard" msgstr "" #: standalone/draknfs:527 #, c-format msgid "General Options" msgstr "Общи настройки" #: standalone/draknfs:527 #, c-format msgid "Custom Options" msgstr "" #: standalone/draknfs:539 standalone/draksambashare:625 #: standalone/draksambashare:792 #, c-format msgid "Please enter a directory to share." msgstr "" #: standalone/draknfs:546 #, c-format msgid "Please use the modify button to set right access." msgstr "" #: standalone/draknfs:600 #, c-format msgid "DrakNFS manage NFS shares" msgstr "" #: standalone/draknfs:609 #, c-format msgid "Failed to add NFS share." msgstr "" #: standalone/draknfs:616 #, c-format msgid "Failed to Modify NFS share." msgstr "" #: standalone/draknfs:623 #, c-format msgid "Failed to remove an NFS share." msgstr "" #: standalone/drakperm:21 #, c-format msgid "System settings" msgstr "Системни настройки" #: standalone/drakperm:22 #, c-format msgid "Custom settings" msgstr "Потребителски настройки" #: standalone/drakperm:23 #, c-format msgid "Custom & system settings" msgstr "Потребителски и системни настройки" #: standalone/drakperm:43 #, c-format msgid "Editable" msgstr "Редактируем" #: standalone/drakperm:48 standalone/drakperm:323 standalone/draksambashare:95 #, c-format msgid "Path" msgstr "Път" #: standalone/drakperm:48 standalone/drakperm:250 #, c-format msgid "User" msgstr "Потребител" #: standalone/drakperm:48 standalone/drakperm:250 #, c-format msgid "Group" msgstr "Група" #: standalone/drakperm:48 standalone/drakperm:335 #, c-format msgid "Permissions" msgstr "Права" #: standalone/drakperm:57 #, c-format msgid "Add a new rule" msgstr "" #: standalone/drakperm:64 standalone/drakperm:99 standalone/drakperm:124 #, c-format msgid "Edit current rule" msgstr "Редактира текущото правило" #: standalone/drakperm:106 #, c-format msgid "" "Here you can see files to use in order to fix permissions, owners, and " "groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" #: standalone/drakperm:109 #, fuzzy, c-format msgid "" "The current security level is %s.\n" "Select permissions to see/edit" msgstr "" "Сегашното ниво на сигурност е %s. \n" "Изберете права за разглеждане/редактиране" #: standalone/drakperm:120 #, c-format msgid "Up" msgstr "Горе" #: standalone/drakperm:120 #, c-format msgid "Move selected rule up one level" msgstr "" #: standalone/drakperm:121 #, c-format msgid "Down" msgstr "Долу" #: standalone/drakperm:121 #, c-format msgid "Move selected rule down one level" msgstr "Премества избраното правило едно ниво надолу" #: standalone/drakperm:122 #, c-format msgid "Add a rule" msgstr "Добавяне на правило" #: standalone/drakperm:122 #, c-format msgid "Add a new rule at the end" msgstr "Добавя ново правило на края" #: standalone/drakperm:123 #, c-format msgid "Delete selected rule" msgstr "Изтрива избраното правило" #. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/drakperm:124 standalone/drakups:302 standalone/drakups:362 #: standalone/drakups:382 standalone/drakvpn:319 standalone/drakvpn:680 #: standalone/printerdrake:245 #, c-format msgid "Edit" msgstr "Редакция" #: standalone/drakperm:242 #, c-format msgid "browse" msgstr "преглед" #: standalone/drakperm:247 #, c-format msgid "user" msgstr "потребител" #: standalone/drakperm:247 #, c-format msgid "group" msgstr "Група" #: standalone/drakperm:247 #, c-format msgid "other" msgstr "друг" #: standalone/drakperm:252 #, c-format msgid "Read" msgstr "Четене" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:255 #, c-format msgid "Enable \"%s\" to read the file" msgstr "" #: standalone/drakperm:259 #, c-format msgid "Write" msgstr "Запис" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:262 #, c-format msgid "Enable \"%s\" to write the file" msgstr "Разрешаване на \"%s\" да пише във файла" #: standalone/drakperm:266 #, c-format msgid "Execute" msgstr "Изпълни" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:269 #, c-format msgid "Enable \"%s\" to execute the file" msgstr "" #: standalone/drakperm:272 #, c-format msgid "Sticky-bit" msgstr "sticky-бит" #: standalone/drakperm:272 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" #: standalone/drakperm:273 #, c-format msgid "Set-UID" msgstr "Задава-UID" #: standalone/drakperm:273 #, c-format msgid "Use owner id for execution" msgstr "Използва id на собственик при изпълнение" #: standalone/drakperm:274 #, c-format msgid "Set-GID" msgstr "Задава-GID" #: standalone/drakperm:274 #, c-format msgid "Use group id for execution" msgstr "Използва id на група при изпълнение" #: standalone/drakperm:292 standalone/drakxtv:89 #, c-format msgid "User:" msgstr "Потребител :" #: standalone/drakperm:294 #, c-format msgid "Group:" msgstr "Група :" #: standalone/drakperm:298 #, c-format msgid "Current user" msgstr "Текущ потребител" #: standalone/drakperm:299 #, c-format msgid "When checked, owner and group will not be changed" msgstr "При проверка, собственика и групата няма да бъдат променени" #: standalone/drakperm:309 #, c-format msgid "Path selection" msgstr "Избор на път" #: standalone/drakperm:329 #, c-format msgid "Property" msgstr "Собственост" #: standalone/drakperm:380 #, c-format msgid "" "The first character of the path must be a slash (\"/\"):\n" "\"%s\"" msgstr "" #: standalone/drakperm:390 #, c-format msgid "Both the username and the group must valid!" msgstr "" #: standalone/drakperm:391 #, c-format msgid "User: %s" msgstr "" #: standalone/drakperm:392 #, c-format msgid "Group: %s" msgstr "" #: standalone/drakroam:33 #, c-format msgid "" "You do not have any wireless interface.\n" "Run the \"%s\" assistant from the Mandriva Linux Control Center" msgstr "" #: standalone/drakroam:48 #, c-format msgid "SSID" msgstr "" #: standalone/drakroam:49 #, c-format msgid "Signal strength" msgstr "" #: standalone/drakroam:51 #, c-format msgid "Encryption" msgstr "Криптиране" #: standalone/drakroam:112 #, c-format msgid "Please enter settings for wireless network \"%s\"" msgstr "" #: standalone/drakroam:123 #, c-format msgid "DNS server" msgstr "" #: standalone/drakroam:228 #, c-format msgid "Connect" msgstr "Връзка" #. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/drakroam:229 standalone/printerdrake:251 #, c-format msgid "Refresh" msgstr "Опресни" #: standalone/draksambashare:62 #, fuzzy, c-format msgid "Share directory" msgstr "Не е директория" #: standalone/draksambashare:63 standalone/draksambashare:96 #, c-format msgid "Comment" msgstr "Коментар" #: standalone/draksambashare:64 standalone/draksambashare:97 #, fuzzy, c-format msgid "Browseable" msgstr "Преглед" #: standalone/draksambashare:65 #, c-format msgid "Public" msgstr "Публичен" #: standalone/draksambashare:66 standalone/draksambashare:102 #, c-format msgid "Writable" msgstr "Запис" #: standalone/draksambashare:67 standalone/draksambashare:143 #, fuzzy, c-format msgid "Create mask" msgstr "Създай" #: standalone/draksambashare:68 standalone/draksambashare:144 #, fuzzy, c-format msgid "Directory mask" msgstr "Сървър с директории" #: standalone/draksambashare:69 #, fuzzy, c-format msgid "Read list" msgstr "Четене" #: standalone/draksambashare:70 standalone/draksambashare:103 #: standalone/draksambashare:602 #, fuzzy, c-format msgid "Write list" msgstr "Запис" #: standalone/draksambashare:71 standalone/draksambashare:135 #, fuzzy, c-format msgid "Admin users" msgstr "Добави потребител" #: standalone/draksambashare:72 standalone/draksambashare:136 #, fuzzy, c-format msgid "Valid users" msgstr "Добави потребител" #: standalone/draksambashare:73 #, fuzzy, c-format msgid "Inherit Permissions" msgstr "Права" #: standalone/draksambashare:74 standalone/draksambashare:137 #, fuzzy, c-format msgid "Hide dot files" msgstr "Скрий файловете" #: standalone/draksambashare:76 standalone/draksambashare:142 #, fuzzy, c-format msgid "Preserve case" msgstr "Настройки" #: standalone/draksambashare:77 #, fuzzy, c-format msgid "Force create mode" msgstr "Вашият модел принтер" #: standalone/draksambashare:78 #, fuzzy, c-format msgid "Force group" msgstr "Работна група" #: standalone/draksambashare:79 standalone/draksambashare:141 #, fuzzy, c-format msgid "Default case" msgstr "Потребител по подразбиране" #: standalone/draksambashare:94 #, c-format msgid "Printer name" msgstr "" #: standalone/draksambashare:98 standalone/draksambashare:594 #, c-format msgid "Printable" msgstr "" #: standalone/draksambashare:99 #, c-format msgid "Print Command" msgstr "" #: standalone/draksambashare:100 #, c-format msgid "LPQ command" msgstr "" #: standalone/draksambashare:101 #, c-format msgid "Guest ok" msgstr "" #: standalone/draksambashare:104 standalone/draksambashare:145 #: standalone/draksambashare:603 #, fuzzy, c-format msgid "Inherit permissions" msgstr "Права" #: standalone/draksambashare:106 #, c-format msgid "Create mode" msgstr "" #: standalone/draksambashare:107 #, c-format msgid "Use client driver" msgstr "" #: standalone/draksambashare:133 #, fuzzy, c-format msgid "Read List" msgstr "Изтрива списък" #: standalone/draksambashare:134 #, fuzzy, c-format msgid "Write List" msgstr "Запис" #: standalone/draksambashare:139 #, fuzzy, c-format msgid "Force Group" msgstr "Група" #: standalone/draksambashare:140 #, c-format msgid "Force create group" msgstr "" #: standalone/draksambashare:160 #, c-format msgid "About Draksambashare" msgstr "" #: standalone/draksambashare:160 #, c-format msgid "" "Mandriva Linux \n" "Release: %s\n" "Author: Antoine Ginies\n" "\n" "This is a simple tool to easily manage Samba configuration." msgstr "" #: standalone/draksambashare:180 #, fuzzy, c-format msgid "Samba server" msgstr "Samba Сървър" #: standalone/draksambashare:180 #, c-format msgid "Restarting/Reloading Samba server..." msgstr "" #: standalone/draksambashare:181 #, c-format msgid "Error Restarting/Reloading Samba server" msgstr "" #: standalone/draksambashare:367 #, fuzzy, c-format msgid "Add a Samba share" msgstr "Samba Сървър" #: standalone/draksambashare:370 #, c-format msgid "Goal of this wizard is to easily create a new Samba share." msgstr "" #: standalone/draksambashare:372 #, fuzzy, c-format msgid "Name of the share:" msgstr "Име на принтер" #: standalone/draksambashare:373 standalone/draksambashare:587 #: standalone/draksambashare:768 #, c-format msgid "Comment:" msgstr "Коментар:" #: standalone/draksambashare:374 #, c-format msgid "Path:" msgstr "Път:" #: standalone/draksambashare:379 #, c-format msgid "" "Share with the same name already exist or share name empty, please choose " "another name." msgstr "" #: standalone/draksambashare:383 standalone/draksambashare:389 #, c-format msgid "Can't create the directory, please enter a correct path." msgstr "" #: standalone/draksambashare:386 standalone/draksambashare:623 #: standalone/draksambashare:790 #, fuzzy, c-format msgid "Please enter a Comment for this share." msgstr "Моля, въведете име на хост или IP." #: standalone/draksambashare:417 #, c-format msgid "" "The wizard successfully added the Samba share. Now just double click on it " "in treeview to modify it" msgstr "" #: standalone/draksambashare:433 #, c-format msgid "pdf-gen - a PDF generator" msgstr "" #: standalone/draksambashare:434 #, c-format msgid "printers - all printers available" msgstr "" #: standalone/draksambashare:438 #, c-format msgid "Add Special Printer share" msgstr "" #: standalone/draksambashare:441 #, c-format msgid "" "Goal of this wizard is to easily create a new special printer Samba share." msgstr "" #: standalone/draksambashare:449 #, c-format msgid "A PDF generator already exists." msgstr "" #: standalone/draksambashare:473 #, c-format msgid "Printers and print$ already exist." msgstr "" #: standalone/draksambashare:524 #, c-format msgid "The wizard successfully added the printer Samba share" msgstr "" #: standalone/draksambashare:547 #, c-format msgid "Please add or select a Samba printer share to be able to modify it." msgstr "" #: standalone/draksambashare:583 #, c-format msgid "Printer share" msgstr "" #: standalone/draksambashare:586 #, c-format msgid "Printer name:" msgstr "Име на принтер:" #: standalone/draksambashare:592 standalone/draksambashare:773 #, fuzzy, c-format msgid "Writable:" msgstr "Запис" #: standalone/draksambashare:593 standalone/draksambashare:774 #, fuzzy, c-format msgid "Browseable:" msgstr "Преглед" #: standalone/draksambashare:598 #, c-format msgid "Advanced options" msgstr "Допълнителни настройки" #: standalone/draksambashare:600 #, c-format msgid "Printer access" msgstr "" #: standalone/draksambashare:604 #, c-format msgid "Guest ok:" msgstr "" #: standalone/draksambashare:605 #, c-format msgid "Create mode:" msgstr "" #: standalone/draksambashare:609 #, c-format msgid "Printer command" msgstr "" #: standalone/draksambashare:611 #, c-format msgid "Print command:" msgstr "" #: standalone/draksambashare:612 #, c-format msgid "LPQ command:" msgstr "" #: standalone/draksambashare:613 #, c-format msgid "Printing:" msgstr "" #: standalone/draksambashare:629 #, c-format msgid "create mode should be numeric. ie: 0755." msgstr "" #: standalone/draksambashare:691 #, c-format msgid "DrakSamba entry" msgstr "" #: standalone/draksambashare:696 #, c-format msgid "Please add or select a Samba share to be able to modify it." msgstr "" #: standalone/draksambashare:719 #, fuzzy, c-format msgid "Samba user access" msgstr "Samba Сървър" #: standalone/draksambashare:727 #, fuzzy, c-format msgid "Mask options" msgstr "Основни настройки" #: standalone/draksambashare:741 #, fuzzy, c-format msgid "Display options" msgstr "Задай опции" #: standalone/draksambashare:763 #, fuzzy, c-format msgid "Samba share directory" msgstr "Не е директория" #: standalone/draksambashare:766 #, fuzzy, c-format msgid "Share name:" msgstr "Общо име" #: standalone/draksambashare:772 #, c-format msgid "Public:" msgstr "" #: standalone/draksambashare:796 #, c-format msgid "" "Create mask, create mode and directory mask should be numeric. ie: 0755." msgstr "" #: standalone/draksambashare:803 #, c-format msgid "Please create this Samba user: %s" msgstr "" #: standalone/draksambashare:926 #, c-format msgid "User information" msgstr "" #: standalone/draksambashare:928 #, c-format msgid "User name:" msgstr "Потребител:" #: standalone/draksambashare:929 standalone/harddrake2:564 #, c-format msgid "Password:" msgstr "Парола:" #: standalone/draksambashare:1129 #, c-format msgid "Failed to add Samba share." msgstr "" #: standalone/draksambashare:1138 #, c-format msgid "Failed to Modify Samba share." msgstr "" #: standalone/draksambashare:1147 #, c-format msgid "Failed to remove a Samba share." msgstr "" #: standalone/draksambashare:1154 #, c-format msgid "File share" msgstr "" #: standalone/draksambashare:1162 #, c-format msgid "Add printers" msgstr "" #: standalone/draksambashare:1168 #, c-format msgid "Failed to add printers." msgstr "" #: standalone/draksambashare:1177 #, c-format msgid "Failed to Modify." msgstr "" #: standalone/draksambashare:1186 #, c-format msgid "Failed to remove." msgstr "" #: standalone/draksambashare:1193 #, c-format msgid "Printers" msgstr "Принтери" #: standalone/draksambashare:1201 #, c-format msgid "Change password" msgstr "" #: standalone/draksambashare:1206 #, c-format msgid "Failed to change user password." msgstr "" #: standalone/draksambashare:1214 #, c-format msgid "Failed to add user." msgstr "" #: standalone/draksambashare:1217 #, c-format msgid "Delete user" msgstr "" #: standalone/draksambashare:1226 #, c-format msgid "Failed to delete user." msgstr "" #: standalone/draksambashare:1238 #, c-format msgid "Samba Users" msgstr "" #: standalone/draksambashare:1247 #, c-format msgid "DrakSamba manage Samba shares" msgstr "" #: standalone/draksec:49 #, c-format msgid "ALL" msgstr "" #: standalone/draksec:50 #, c-format msgid "LOCAL" msgstr "" #: standalone/draksec:53 standalone/net_applet:475 #, c-format msgid "Ignore" msgstr "Игнориране" #. -PO: Do not alter the and tags. #. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words. #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX. #: standalone/draksec:103 #, c-format msgid "" "Here, you can setup the security level and administrator of your machine.\n" "\n" "\n" "The 'Security Administrator' is the one who " "will receive security alerts if the\n" "'Security Alerts' option is set. It can be a " "username or an email.\n" "\n" "\n" "The 'Security Level' menu allows you to select " "one of the six preconfigured security levels\n" "provided with msec. These levels range from 'poor' security and ease of use, to\n" "'paranoid' config, suitable for very sensitive " "server applications:\n" "\n" "\n" "Poor: This is a totally unsafe but " "very\n" "easy to use security level. It should only be used for machines not " "connected to\n" "any network and that are not accessible to everybody.\n" "\n" "\n" "Standard: This is the standard " "security\n" "recommended for a computer that will be used to connect to the Internet as " "a\n" "client.\n" "\n" "\n" "High: There are already some\n" "restrictions, and more automatic checks are run every night.\n" "\n" "\n" "Higher: The security is now high " "enough\n" "to use the system as a server which can accept connections from many " "clients. If\n" "your machine is only a client on the Internet, you should choose a lower " "level.\n" "\n" "\n" "Paranoid: This is similar to the " "previous\n" "level, but the system is entirely closed and security features are at their\n" "maximum" msgstr "" #: standalone/draksec:156 standalone/harddrake2:208 #, c-format msgid "" "Description of the fields:\n" "\n" msgstr "" "Описание на полетата:\n" "\n" #: standalone/draksec:170 #, c-format msgid "(default value: %s)" msgstr "(подразбираща стойност: %s)" #: standalone/draksec:212 #, c-format msgid "Security Level:" msgstr "Ниво на сигурност:" #: standalone/draksec:219 #, c-format msgid "Security Administrator:" msgstr "Администратор по защита:" #: standalone/draksec:221 #, c-format msgid "Basic options" msgstr "Основни настройки" #: standalone/draksec:235 #, c-format msgid "Network Options" msgstr "Мрежови опции" #: standalone/draksec:235 #, c-format msgid "System Options" msgstr "Системни опции" #: standalone/draksec:270 #, c-format msgid "Periodic Checks" msgstr "" #: standalone/draksec:300 #, c-format msgid "Please wait, setting security level..." msgstr "Моля, изберете ниво на сигурност..." #: standalone/draksec:306 #, c-format msgid "Please wait, setting security options..." msgstr "Моля, изчакайте, установявам опциите по защита..." #: standalone/draksound:47 #, c-format msgid "No Sound Card detected!" msgstr "Няма намерена звукова карта!" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/draksound:50 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.mandrivalinux.com/en/hardware.php3" msgstr "" #: standalone/draksound:57 #, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or " "the sndconfig program. Just type \"alsaconf\" or \"sndconfig\" in a console." msgstr "" #: standalone/draksplash:30 #, c-format msgid "x coordinate of text box" msgstr "" #: standalone/draksplash:31 #, c-format msgid "y coordinate of text box" msgstr "" #: standalone/draksplash:32 #, c-format msgid "text box width" msgstr "" #: standalone/draksplash:33 #, c-format msgid "text box height" msgstr "височина на рамка за текст" #: standalone/draksplash:34 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" "лентата за прогрес x координати\n" "от горният ляв ъгъл" #: standalone/draksplash:35 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" "лентата за прогрес y координати\n" "от горният ляв ъгъл" #: standalone/draksplash:36 #, c-format msgid "the width of the progress bar" msgstr "ширината на лентата за прогрес" #: standalone/draksplash:37 #, c-format msgid "the height of the progress bar" msgstr "височината на лентата за прогрес" #: standalone/draksplash:38 #, c-format msgid "x coordinate of the text" msgstr "" #: standalone/draksplash:39 #, c-format msgid "y coordinate of the text" msgstr "" #: standalone/draksplash:40 #, c-format msgid "text box transparency" msgstr "" #: standalone/draksplash:41 #, c-format msgid "progress box transparency" msgstr "" #: standalone/draksplash:42 #, c-format msgid "text size" msgstr "" #: standalone/draksplash:59 #, c-format msgid "Choose progress bar color 1" msgstr "" #: standalone/draksplash:60 #, c-format msgid "Choose progress bar color 2" msgstr "" #: standalone/draksplash:61 #, c-format msgid "Choose progress bar background" msgstr "" #: standalone/draksplash:62 #, c-format msgid "Gradient type" msgstr "" #: standalone/draksplash:63 #, c-format msgid "Choose text color" msgstr "" #: standalone/draksplash:65 standalone/draksplash:72 #, c-format msgid "Choose picture" msgstr "" #: standalone/draksplash:66 #, c-format msgid "Silent bootsplash" msgstr "" #: standalone/draksplash:69 #, c-format msgid "Choose text zone color" msgstr "" #: standalone/draksplash:70 #, c-format msgid "Text color" msgstr "Цвят" #: standalone/draksplash:71 #, c-format msgid "Background color" msgstr "Цвят на фона" #: standalone/draksplash:73 #, c-format msgid "Verbose bootsplash" msgstr "" #: standalone/draksplash:75 #, c-format msgid "Display logo on Console" msgstr "Показва лого на Конзола" #: standalone/draksplash:78 #, c-format msgid "Console bootsplash" msgstr "" #: standalone/draksplash:84 #, c-format msgid "Theme name" msgstr "Име на тема" #: standalone/draksplash:87 #, c-format msgid "final resolution" msgstr "" #: standalone/draksplash:92 #, c-format msgid "Save theme" msgstr "Запазва тема" #: standalone/draksplash:153 #, c-format msgid "saving Bootsplash theme..." msgstr "" #: standalone/draksplash:162 #, c-format msgid "Unable to load image file %s" msgstr "" #: standalone/draksplash:173 #, c-format msgid "choose image" msgstr "избор на изображение" #: standalone/draksplash:188 #, c-format msgid "Color selection" msgstr "" #: standalone/drakups:74 #, c-format msgid "Connected through a serial port or an usb cable" msgstr "" #: standalone/drakups:80 #, fuzzy, c-format msgid "Add an UPS device" msgstr "Добавяне на обект" #: standalone/drakups:83 #, fuzzy, c-format msgid "" "Welcome to the UPS configuration utility.\n" "\n" "Here, you'll add a new UPS to your system.\n" msgstr "" "Добре дошли в настройката на е-поща.\n" "\n" "Тук можете да укажете предопитанията си за известяващата система.\n" #: standalone/drakups:90 #, c-format msgid "" "We're going to add an UPS device.\n" "\n" "Do you want to autodetect UPS devices connected to this machine or to " "manually select them?" msgstr "" #: standalone/drakups:93 #, fuzzy, c-format msgid "Autodetection" msgstr "Автоматично засичане" #: standalone/drakups:101 standalone/harddrake2:356 #, c-format msgid "Detection in progress" msgstr "Откриване в прогрес" #: standalone/drakups:121 #, c-format msgid "The wizard successfully added the following UPS devices:" msgstr "" #: standalone/drakups:123 #, fuzzy, c-format msgid "No new UPS devices was found" msgstr "Не е намерен образ" #: standalone/drakups:128 standalone/drakups:140 #, fuzzy, c-format msgid "UPS driver configuration" msgstr "Настройка на CUPS принтер" #: standalone/drakups:128 #, fuzzy, c-format msgid "Please select your UPS model." msgstr "Моля, пробвайте мишката си" #: standalone/drakups:129 #, fuzzy, c-format msgid "Manufacturer / Model:" msgstr "Производител на принтера, модел" #: standalone/drakups:140 #, c-format msgid "" "We are configuring the \"%s\" UPS from \"%s\".\n" "Please fill in its name, its driver and its port." msgstr "" #: standalone/drakups:145 #, c-format msgid "Name:" msgstr "Име:" #: standalone/drakups:145 #, fuzzy, c-format msgid "The name of your ups" msgstr "име на процесора" #: standalone/drakups:146 #, c-format msgid "The driver that manages your ups" msgstr "" #: standalone/drakups:147 #, c-format msgid "Port:" msgstr "Порт:" #: standalone/drakups:149 #, fuzzy, c-format msgid "The port on which is connected your ups" msgstr "Моля, изберете типа на шината към която е свързана мишката ви." #: standalone/drakups:159 #, c-format msgid "The wizard successfully configured the new \"%s\" UPS device." msgstr "" #: standalone/drakups:250 #, fuzzy, c-format msgid "UPS devices" msgstr "Услуги" #: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286 #: standalone/harddrake2:85 standalone/harddrake2:111 #: standalone/harddrake2:118 #, c-format msgid "Name" msgstr "Име" #: standalone/drakups:269 #, fuzzy, c-format msgid "UPS users" msgstr "Потребители" #: standalone/drakups:285 #, fuzzy, c-format msgid "Access Control Lists" msgstr "достъп до мрежови инструменти" #: standalone/drakups:286 #, c-format msgid "IP mask" msgstr "" #: standalone/drakups:298 #, c-format msgid "Rules" msgstr "Правила" #: standalone/drakups:299 #, c-format msgid "Action" msgstr "Действие" #: standalone/drakups:299 standalone/drakvpn:1132 standalone/harddrake2:82 #, c-format msgid "Level" msgstr "Ниво" #: standalone/drakups:299 #, fuzzy, c-format msgid "ACL name" msgstr "LVM име ?" #: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342 #, fuzzy, c-format msgid "DrakUPS" msgstr "Дворак (US)" #: standalone/drakups:339 #, fuzzy, c-format msgid "Welcome to the UPS configuration tools" msgstr "Проверка на настройката" #: standalone/drakvpn:73 #, fuzzy, c-format msgid "DrakVPN" msgstr "Дворак (US)" #: standalone/drakvpn:95 #, fuzzy, c-format msgid "The VPN connection is enabled." msgstr "Споделянето на Интернет в момента е включено." #: standalone/drakvpn:96 #, fuzzy, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "Установката на Споделянето на Интернет връзката е завършена.\n" "В момента е включена.\n" "\n" "Какво искате да направите ?" #: standalone/drakvpn:101 #, c-format msgid "disable" msgstr "изключи" #: standalone/drakvpn:101 standalone/drakvpn:127 #, c-format msgid "reconfigure" msgstr "пренастройка" #: standalone/drakvpn:101 standalone/drakvpn:127 standalone/drakvpn:362 #: standalone/drakvpn:721 #, c-format msgid "dismiss" msgstr "остави" #: standalone/drakvpn:105 #, fuzzy, c-format msgid "Disabling VPN..." msgstr "Изключване на сървъри ..." #: standalone/drakvpn:114 #, fuzzy, c-format msgid "The VPN connection is now disabled." msgstr "Споделянето на Интернет връзката в момента е изключено." #: standalone/drakvpn:121 #, fuzzy, c-format msgid "VPN connection currently disabled" msgstr "Споделянето на Интернет връзката е изключено." #: standalone/drakvpn:122 #, fuzzy, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "Установката на Споделянето на Интернет връзката е вече завършена.\n" "В момента е изключена.\n" "\n" "Какво искате да направите ?" #: standalone/drakvpn:127 #, c-format msgid "enable" msgstr "включи" #: standalone/drakvpn:135 #, fuzzy, c-format msgid "Enabling VPN..." msgstr "Включване на сървъри ..." #: standalone/drakvpn:141 #, fuzzy, c-format msgid "The VPN connection is now enabled." msgstr "Споделянето на Интернет в момента е включено." #: standalone/drakvpn:155 standalone/drakvpn:183 #, c-format msgid "Simple VPN setup." msgstr "" #: standalone/drakvpn:156 #, c-format msgid "" "You are about to configure your computer to use a VPN connection.\n" "\n" "With this feature, computers on your local private network and computers\n" "on some other remote private networks, can share resources, through\n" "their respective firewalls, over the Internet, in a secure manner. \n" "\n" "The communication over the Internet is encrypted. The local and remote\n" "computers look as if they were on the same network.\n" "\n" "Make sure you have configured your Network/Internet access using\n" "drakconnect before going any further." msgstr "" #: standalone/drakvpn:184 #, c-format msgid "" "VPN connection.\n" "\n" "This program is based on the following projects:\n" " - FreeSwan: \t\t\thttp://www.freeswan.org/\n" " - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n" " - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n" " - ipsec-howto: \t\thttp://www.ipsec-howto.org\n" " - the docs and man pages coming with the %s package\n" "\n" "Please read AT LEAST the ipsec-howto docs\n" "before going any further." msgstr "" #: standalone/drakvpn:196 #, fuzzy, c-format msgid "Kernel module." msgstr "Премахни модула" #: standalone/drakvpn:197 #, c-format msgid "" "The kernel needs to have ipsec support.\n" "\n" "You're running a %s kernel version.\n" "\n" "This kernel has '%s' support." msgstr "" #: standalone/drakvpn:264 #, c-format msgid "Problems installing package %s" msgstr "Проблеми с инсталирането на пакета %s" #: standalone/drakvpn:278 #, fuzzy, c-format msgid "Security Policies" msgstr "Предупреждения за защита:" #: standalone/drakvpn:278 #, c-format msgid "IKE daemon racoon" msgstr "" #: standalone/drakvpn:281 standalone/drakvpn:292 #, fuzzy, c-format msgid "Configuration file" msgstr "Настройка" #: standalone/drakvpn:282 #, c-format msgid "" "Configuration step!\n" "\n" "You need to define the Security Policies and then to \n" "configure the automatic key exchange (IKE) daemon. \n" "The KAME IKE daemon we're using is called 'racoon'.\n" "\n" "What would you like to configure?\n" msgstr "" #: standalone/drakvpn:293 #, c-format msgid "" "Next, we will configure the %s file.\n" "\n" "\n" "Simply click on Next.\n" msgstr "" #: standalone/drakvpn:311 standalone/drakvpn:671 #, fuzzy, c-format msgid "%s entries" msgstr ", %s сектора" #: standalone/drakvpn:312 #, c-format msgid "" "The %s file contents\n" "is divided into sections.\n" "\n" "You can now:\n" "\n" " - display, add, edit, or remove sections, then\n" " - commit the changes\n" "\n" "What would you like to do?\n" msgstr "" #: standalone/drakvpn:319 standalone/drakvpn:680 #, fuzzy, c-format msgid "" "_:display here is a verb\n" "Display" msgstr "Повтори" #: standalone/drakvpn:319 standalone/drakvpn:680 #, fuzzy, c-format msgid "Commit" msgstr "компактен" #: standalone/drakvpn:333 standalone/drakvpn:337 standalone/drakvpn:695 #: standalone/drakvpn:699 #, fuzzy, c-format msgid "" "_:display here is a verb\n" "Display configuration" msgstr "Настройка на LAN" #: standalone/drakvpn:338 #, c-format msgid "" "The %s file does not exist.\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose 'add'.\n" msgstr "" #: standalone/drakvpn:354 #, c-format msgid "ipsec.conf entries" msgstr "" #: standalone/drakvpn:355 #, c-format msgid "" "The %s file contains different sections.\n" "\n" "Here is its skeleton:\t'config setup' \n" "\t\t\t\t\t'conn default' \n" "\t\t\t\t\t'normal1'\n" "\t\t\t\t\t'normal2' \n" "\n" "You can now add one of these sections.\n" "\n" "Choose the section you would like to add.\n" msgstr "" #: standalone/drakvpn:362 #, fuzzy, c-format msgid "config setup" msgstr "пренастройка" #: standalone/drakvpn:362 #, fuzzy, c-format msgid "conn %default" msgstr "по подрабиране" #: standalone/drakvpn:362 #, fuzzy, c-format msgid "normal conn" msgstr "Нормален режим" #: standalone/drakvpn:368 standalone/drakvpn:409 standalone/drakvpn:496 #, fuzzy, c-format msgid "Exists!" msgstr "Излез" #: standalone/drakvpn:369 standalone/drakvpn:410 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change its name.\n" msgstr "" #: standalone/drakvpn:386 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow this config\n" "setup section.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:391 #, fuzzy, c-format msgid "interfaces" msgstr "Интерфейс" #: standalone/drakvpn:392 #, c-format msgid "klipsdebug" msgstr "" #: standalone/drakvpn:393 #, c-format msgid "plutodebug" msgstr "" #: standalone/drakvpn:394 #, c-format msgid "plutoload" msgstr "" #: standalone/drakvpn:395 #, c-format msgid "plutostart" msgstr "" #: standalone/drakvpn:396 #, c-format msgid "uniqueids" msgstr "" #: standalone/drakvpn:430 #, c-format msgid "" "This is the first section after the config\n" "setup one.\n" "\n" "Here you define the default settings. \n" "All the other sections will follow this one.\n" "The left settings are optional. If do not define\n" "them here, globally, you can define them in each\n" "section.\n" msgstr "" #: standalone/drakvpn:437 #, fuzzy, c-format msgid "PFS" msgstr "HFS" #: standalone/drakvpn:438 #, c-format msgid "keyingtries" msgstr "" #: standalone/drakvpn:439 #, c-format msgid "compress" msgstr "" #: standalone/drakvpn:440 #, c-format msgid "disablearrivalcheck" msgstr "" #: standalone/drakvpn:441 standalone/drakvpn:480 #, c-format msgid "left" msgstr "ляво" #: standalone/drakvpn:442 standalone/drakvpn:481 #, c-format msgid "leftcert" msgstr "" #: standalone/drakvpn:443 standalone/drakvpn:482 #, c-format msgid "leftrsasigkey" msgstr "" #: standalone/drakvpn:444 standalone/drakvpn:483 #, c-format msgid "leftsubnet" msgstr "" #: standalone/drakvpn:445 standalone/drakvpn:484 #, c-format msgid "leftnexthop" msgstr "" #: standalone/drakvpn:474 #, c-format msgid "" "Your %s file has several sections, or connections.\n" "\n" "You can now add a new section.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:477 #, fuzzy, c-format msgid "section name" msgstr "Име на връзката" #: standalone/drakvpn:478 #, fuzzy, c-format msgid "authby" msgstr "Път" #: standalone/drakvpn:479 #, c-format msgid "auto" msgstr "авто" #: standalone/drakvpn:485 #, c-format msgid "right" msgstr "дясно" #: standalone/drakvpn:486 #, fuzzy, c-format msgid "rightcert" msgstr "По-високо" #: standalone/drakvpn:487 #, c-format msgid "rightrsasigkey" msgstr "" #: standalone/drakvpn:488 #, c-format msgid "rightsubnet" msgstr "" #: standalone/drakvpn:489 #, c-format msgid "rightnexthop" msgstr "" #: standalone/drakvpn:497 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change the name of the section.\n" msgstr "" #: standalone/drakvpn:529 #, c-format msgid "" "Add a Security Policy.\n" "\n" "You can now add a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:562 standalone/drakvpn:812 #, fuzzy, c-format msgid "Edit section" msgstr "Избор на път" #: standalone/drakvpn:563 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to edit \n" "and then click on next.\n" msgstr "" #: standalone/drakvpn:566 standalone/drakvpn:646 standalone/drakvpn:817 #: standalone/drakvpn:863 #, fuzzy, c-format msgid "Section names" msgstr "Име на връзката" #: standalone/drakvpn:576 #, fuzzy, c-format msgid "Can not edit!" msgstr "Не мога да отворя %s!" #: standalone/drakvpn:577 #, c-format msgid "" "You cannot edit this section.\n" "\n" "This section is mandatory for Freeswan 2.X.\n" "One has to specify version 2.0 on the top\n" "of the %s file, and eventually, disable or\n" "enable the opportunistic encryption.\n" msgstr "" #: standalone/drakvpn:586 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the config setup section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:597 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the default section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:610 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the normal section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:631 #, c-format msgid "" "Edit a Security Policy.\n" "\n" "You can now edit a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:642 standalone/drakvpn:859 #, fuzzy, c-format msgid "Remove section" msgstr "Изтрива списък" #: standalone/drakvpn:643 standalone/drakvpn:860 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to remove\n" "and then click on next.\n" msgstr "" #: standalone/drakvpn:672 #, c-format msgid "" "The racoon.conf file configuration.\n" "\n" "The contents of this file is divided into sections.\n" "You can now:\n" " - display \t\t (display the file contents)\n" " - add\t\t\t (add one section)\n" " - edit \t\t\t (modify parameters of an existing section)\n" " - remove \t\t (remove an existing section)\n" " - commit \t\t (writes the changes to the real file)" msgstr "" #: standalone/drakvpn:700 #, c-format msgid "" "The %s file does not exist\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose configure.\n" msgstr "" #: standalone/drakvpn:714 #, c-format msgid "racoonf.conf entries" msgstr "" #: standalone/drakvpn:715 #, c-format msgid "" "The 'add' sections step.\n" "\n" "Here below is the racoon.conf file skeleton:\n" "\t'path'\n" "\t'remote'\n" "\t'sainfo' \n" "\n" "Choose the section you would like to add.\n" msgstr "" #: standalone/drakvpn:721 #, c-format msgid "path" msgstr "път" #: standalone/drakvpn:721 #, c-format msgid "remote" msgstr "отдалечен" #: standalone/drakvpn:721 #, fuzzy, c-format msgid "sainfo" msgstr "Информация" #: standalone/drakvpn:729 #, c-format msgid "" "The 'add path' section step.\n" "\n" "The path sections have to be on top of your racoon.conf file.\n" "\n" "Put your mouse over the certificate entry to obtain online help." msgstr "" #: standalone/drakvpn:732 #, fuzzy, c-format msgid "path type" msgstr "Промяни типа" #: standalone/drakvpn:736 #, c-format msgid "" "path include path: specifies a path to include\n" "a file. See File Inclusion.\n" "\tExample: path include '/etc/racoon'\n" "\n" "path pre_shared_key file: specifies a file containing\n" "pre-shared key(s) for various ID(s). See Pre-shared key File.\n" "\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n" "\n" "path certificate path: racoon(8) will search this directory\n" "if a certificate or certificate request is received.\n" "\tExample: path certificate '/etc/cert' ;\n" "\n" "File Inclusion: include file \n" "other configuration files can be included.\n" "\tExample: include \"remote.conf\" ;\n" "\n" "Pre-shared key File: Pre-shared key file defines a pair\n" "of the identifier and the shared secret key which are used at\n" "Pre-shared key authentication method in phase 1." msgstr "" #: standalone/drakvpn:756 standalone/drakvpn:849 #, fuzzy, c-format msgid "real file" msgstr "Изберете файл" #: standalone/drakvpn:779 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your racoon.conf file.\n" "\n" "You can now choose the remote settings.\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:796 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your %s file.\n" "\n" "You can now choose the sainfo settings.\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:813 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here in the list below the one you want\n" "to edit and then click on next.\n" msgstr "" #: standalone/drakvpn:824 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "\n" "You can now edit the remote section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:833 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the sainfo section entries.\n" "\n" "Choose continue when you are done to write the data." msgstr "" #: standalone/drakvpn:841 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow these path\n" "sections.\n" "\n" "You can now edit the path entries.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:848 #, c-format msgid "path_type" msgstr "" #: standalone/drakvpn:889 #, c-format msgid "" "Everything has been configured.\n" "\n" "You may now share resources through the Internet,\n" "in a secure way, using a VPN connection.\n" "\n" "You should make sure that that the tunnels shorewall\n" "section is configured." msgstr "" #: standalone/drakvpn:909 #, c-format msgid "Sainfo source address" msgstr "" #: standalone/drakvpn:910 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.209 is the source address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.1.0/24 is the source address" msgstr "" #: standalone/drakvpn:927 #, fuzzy, c-format msgid "Sainfo source protocol" msgstr "Европейски протокол" #: standalone/drakvpn:928 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe first 'any' allows any protocol for the source" msgstr "" #: standalone/drakvpn:942 #, c-format msgid "Sainfo destination address" msgstr "" #: standalone/drakvpn:943 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.218 is the destination address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.2.0/24 is the destination address" msgstr "" #: standalone/drakvpn:960 #, c-format msgid "Sainfo destination protocol" msgstr "" #: standalone/drakvpn:961 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe last 'any' allows any protocol for the destination" msgstr "" #: standalone/drakvpn:975 #, c-format msgid "PFS group" msgstr "" #: standalone/drakvpn:977 #, c-format msgid "" "define the group of Diffie-Hellman exponentiations.\n" "If you do not require PFS then you can omit this directive.\n" "Any proposal will be accepted if you do not specify one.\n" "group is one of the following: modp768, modp1024, modp1536.\n" "Or you can define 1, 2, or 5 as the DH group number." msgstr "" #: standalone/drakvpn:982 #, fuzzy, c-format msgid "Lifetime number" msgstr "номер" #: standalone/drakvpn:983 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will not be proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n" msgstr "" #: standalone/drakvpn:999 #, c-format msgid "Lifetime unit" msgstr "" #: standalone/drakvpn:1001 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will not be proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and " "'hour'.\n" msgstr "" #: standalone/drakvpn:1019 #, fuzzy, c-format msgid "Authentication algorithm" msgstr "идентификация" #: standalone/drakvpn:1021 #, c-format msgid "Compression algorithm" msgstr "" #: standalone/drakvpn:1022 #, fuzzy, c-format msgid "deflate" msgstr "по подрабиране" #: standalone/drakvpn:1029 #, c-format msgid "Remote" msgstr "Отдалечен" #: standalone/drakvpn:1030 #, c-format msgid "" "remote (address | anonymous) [[port]] { statements }\n" "specifies the parameters for IKE phase 1 for each remote node.\n" "The default port is 500. If anonymous is specified, the state-\n" "ments apply to all peers which do not match any other remote\n" "directive.\n" "\n" "Examples: \n" "\n" "remote anonymous\n" "remote ::1 [8000]" msgstr "" #: standalone/drakvpn:1038 #, fuzzy, c-format msgid "Exchange mode" msgstr "Режим на набиране" #: standalone/drakvpn:1040 #, c-format msgid "" "defines the exchange mode for phase 1 when racoon is the\n" "initiator. Also it means the acceptable exchange mode\n" "when racoon is responder. More than one mode can be\n" "specified by separating them with a comma. All of the\n" "modes are acceptable. The first exchange mode is what\n" "racoon uses when it is the initiator.\n" msgstr "" #: standalone/drakvpn:1046 #, fuzzy, c-format msgid "Generate policy" msgstr "Сигурност" #: standalone/drakvpn:1047 standalone/drakvpn:1063 standalone/drakvpn:1076 #, c-format msgid "off" msgstr "изключено" #: standalone/drakvpn:1047 standalone/drakvpn:1063 standalone/drakvpn:1076 #, c-format msgid "on" msgstr "включено" #: standalone/drakvpn:1048 #, c-format msgid "" "This directive is for the responder. Therefore you\n" "should set passive on in order that racoon(8) only\n" "becomes a responder. If the responder does not have any\n" "policy in SPD during phase 2 negotiation, and the direc-\n" "tive is set on, then racoon(8) will choice the first pro-\n" "posal in the SA payload from the initiator, and generate\n" "policy entries from the proposal. It is useful to nego-\n" "tiate with the client which is allocated IP address\n" "dynamically. Note that inappropriate policy might be\n" "installed into the responder's SPD by the initiator. So\n" "that other communication might fail if such policies\n" "installed due to some policy mismatches between the ini-\n" "tiator and the responder. This directive is ignored in\n" "the initiator case. The default value is off." msgstr "" #: standalone/drakvpn:1062 #, c-format msgid "Passive" msgstr "Страдателен залог" #: standalone/drakvpn:1064 #, c-format msgid "" "If you do not want to initiate the negotiation, set this\n" "to on. The default value is off. It is useful for a\n" "server." msgstr "" #: standalone/drakvpn:1067 #, c-format msgid "Certificate type" msgstr "" #: standalone/drakvpn:1069 #, fuzzy, c-format msgid "My certfile" msgstr "Изберете файл" #: standalone/drakvpn:1070 #, fuzzy, c-format msgid "Name of the certificate" msgstr "Име на принтер" #: standalone/drakvpn:1071 #, c-format msgid "My private key" msgstr "" #: standalone/drakvpn:1072 #, fuzzy, c-format msgid "Name of the private key" msgstr "Име на принтер" #: standalone/drakvpn:1073 #, fuzzy, c-format msgid "Peers certfile" msgstr "Изберете файл" #: standalone/drakvpn:1074 #, c-format msgid "Name of the peers certificate" msgstr "" #: standalone/drakvpn:1075 #, fuzzy, c-format msgid "Verify cert" msgstr "много добър" #: standalone/drakvpn:1077 #, c-format msgid "" "If you do not want to verify the peer's certificate for\n" "some reason, set this to off. The default is on." msgstr "" #: standalone/drakvpn:1079 #, c-format msgid "My identifier" msgstr "" #: standalone/drakvpn:1080 #, c-format msgid "" "specifies the identifier sent to the remote host and the\n" "type to use in the phase 1 negotiation. address, FQDN,\n" "user_fqdn, keyid and asn1dn can be used as an idtype.\n" "they are used like:\n" "\tmy_identifier address [address];\n" "\t\tthe type is the IP address. This is the default\n" "\t\ttype if you do not specify an identifier to use.\n" "\tmy_identifier user_fqdn string;\n" "\t\tthe type is a USER_FQDN (user fully-qualified\n" "\t\tdomain name).\n" "\tmy_identifier FQDN string;\n" "\t\tthe type is a FQDN (fully-qualified domain name).\n" "\tmy_identifier keyid file;\n" "\t\tthe type is a KEY_ID.\n" "\tmy_identifier asn1dn [string];\n" "\t\tthe type is an ASN.1 distinguished name. If\n" "\t\tstring is omitted, racoon(8) will get DN from\n" "\t\tSubject field in the certificate.\n" "\n" "Examples: \n" "\n" "my_identifier user_fqdn \"myemail@mydomain.com\"" msgstr "" #: standalone/drakvpn:1100 #, fuzzy, c-format msgid "Peers identifier" msgstr "Принтер" #: standalone/drakvpn:1101 #, fuzzy, c-format msgid "Proposal" msgstr "Протокол" #: standalone/drakvpn:1103 #, c-format msgid "" "specify the encryption algorithm used for the\n" "phase 1 negotiation. This directive must be defined. \n" "algorithm is one of the following: \n" "\n" "DES, 3DES, blowfish, cast128 for oakley.\n" "\n" "For other transforms, this statement should not be used." msgstr "" #: standalone/drakvpn:1110 #, c-format msgid "Hash algorithm" msgstr "" #: standalone/drakvpn:1112 #, fuzzy, c-format msgid "DH group" msgstr "Група" #: standalone/drakvpn:1119 #, c-format msgid "Command" msgstr "Команда" #: standalone/drakvpn:1120 #, c-format msgid "Source IP range" msgstr "" #: standalone/drakvpn:1121 #, c-format msgid "Destination IP range" msgstr "" #: standalone/drakvpn:1122 #, fuzzy, c-format msgid "Upper-layer protocol" msgstr "Европейски протокол" #: standalone/drakvpn:1122 standalone/drakvpn:1129 #, fuzzy, c-format msgid "any" msgstr "Ден" #: standalone/drakvpn:1124 #, c-format msgid "Flag" msgstr "Flag" #: standalone/drakvpn:1125 #, c-format msgid "Direction" msgstr "Посока" #: standalone/drakvpn:1126 #, c-format msgid "IPsec policy" msgstr "" #: standalone/drakvpn:1126 #, fuzzy, c-format msgid "ipsec" msgstr "Мсек" #: standalone/drakvpn:1126 #, fuzzy, c-format msgid "discard" msgstr "изключен" #: standalone/drakvpn:1129 #, c-format msgid "Mode" msgstr "Режим" #: standalone/drakvpn:1129 #, fuzzy, c-format msgid "tunnel" msgstr "Канал" #: standalone/drakvpn:1129 #, fuzzy, c-format msgid "transport" msgstr "прехвърлени" #: standalone/drakvpn:1131 #, fuzzy, c-format msgid "Source/destination" msgstr "Работна станция" #: standalone/drakvpn:1132 #, c-format msgid "require" msgstr "" #: standalone/drakvpn:1132 #, c-format msgid "default" msgstr "по подрабиране" #: standalone/drakvpn:1132 #, fuzzy, c-format msgid "use" msgstr "Мишка" #: standalone/drakvpn:1132 #, fuzzy, c-format msgid "unique" msgstr "Мартиника" #: standalone/drakxtv:45 #, c-format msgid "USA (broadcast)" msgstr "" #: standalone/drakxtv:45 #, c-format msgid "USA (cable)" msgstr "" #: standalone/drakxtv:45 #, c-format msgid "USA (cable-hrc)" msgstr "" #: standalone/drakxtv:45 #, c-format msgid "Canada (cable)" msgstr "Канада (кабел)" #: standalone/drakxtv:46 #, c-format msgid "Japan (broadcast)" msgstr "" #: standalone/drakxtv:46 #, c-format msgid "Japan (cable)" msgstr "" #: standalone/drakxtv:46 #, c-format msgid "China (broadcast)" msgstr "" #: standalone/drakxtv:47 #, c-format msgid "West Europe" msgstr "Западна Европа" #: standalone/drakxtv:47 #, c-format msgid "East Europe" msgstr "Източна Европа" #: standalone/drakxtv:47 #, c-format msgid "France [SECAM]" msgstr "Франция [SECAM]" #: standalone/drakxtv:48 #, c-format msgid "Newzealand" msgstr "" #: standalone/drakxtv:51 #, c-format msgid "Australian Optus cable TV" msgstr "" #: standalone/drakxtv:85 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" #: standalone/drakxtv:87 #, c-format msgid "TV norm:" msgstr "ТВ норма:" #: standalone/drakxtv:88 #, c-format msgid "Area:" msgstr "" #: standalone/drakxtv:93 #, c-format msgid "Scanning for TV channels in progress..." msgstr "" #: standalone/drakxtv:103 #, c-format msgid "Scanning for TV channels" msgstr "" #: standalone/drakxtv:107 #, c-format msgid "There was an error while scanning for TV channels" msgstr "Появи се грешка при сканиране за TV канали" #: standalone/drakxtv:110 #, c-format msgid "Have a nice day!" msgstr "" #: standalone/drakxtv:111 #, c-format msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "" #: standalone/drakxtv:149 #, c-format msgid "No TV Card detected!" msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/drakxtv:151 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.mandrivalinux.com/en/hardware.php3" msgstr "" #: standalone/harddrake2:25 #, c-format msgid "Alternative drivers" msgstr "Алтернативни драйвери" #: standalone/harddrake2:26 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "списък на алтернативни драйвери за тази карта" #: standalone/harddrake2:29 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" "това е физическата шина на който е закачено устроството (напр: PCI, USB, ...)" #: standalone/harddrake2:31 standalone/harddrake2:146 #, c-format msgid "Bus identification" msgstr "Идентификация на шина" #: standalone/harddrake2:32 #, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "" #: standalone/harddrake2:35 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" #: standalone/harddrake2:38 #, c-format msgid "Drive capacity" msgstr "" #: standalone/harddrake2:38 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "" #: standalone/harddrake2:39 #, c-format msgid "this field describes the device" msgstr "Това поле описва устройството" #: standalone/harddrake2:40 #, c-format msgid "Old device file" msgstr "Стар файл на устроство" #: standalone/harddrake2:41 #, c-format msgid "old static device name used in dev package" msgstr "" #: standalone/harddrake2:42 #, c-format msgid "New devfs device" msgstr "Ново devfs устройство" #: standalone/harddrake2:43 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "ново динамично устройство генерирано от ядрото devfs" #. -PO: here "module" is the "jargon term" for a kernel driver #: standalone/harddrake2:46 #, c-format msgid "Module" msgstr "Модул" #: standalone/harddrake2:46 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "модулът на ГНУ/Линукс ядрото се грижи за това устройство" #: standalone/harddrake2:47 #, fuzzy, c-format msgid "Extended partitions" msgstr "Създай нов дял" #: standalone/harddrake2:47 #, fuzzy, c-format msgid "the number of extended partitions" msgstr "номерът на процесора" #: standalone/harddrake2:48 #, c-format msgid "Geometry" msgstr "Геометрия" #: standalone/harddrake2:48 #, c-format msgid "Cylinder/head/sectors geometry of the disk" msgstr "" #: standalone/harddrake2:49 #, fuzzy, c-format msgid "Disk controller" msgstr "SMBus контролери" #: standalone/harddrake2:49 #, c-format msgid "the disk controller on the host side" msgstr "" #: standalone/harddrake2:50 #, c-format msgid "class of hardware device" msgstr "клас хардуерно устройство" #: standalone/harddrake2:51 standalone/harddrake2:83 #: standalone/printerdrake:224 #, c-format msgid "Model" msgstr "Модел" #: standalone/harddrake2:51 #, c-format msgid "hard disk model" msgstr "модел на твърд диск" #: standalone/harddrake2:52 #, c-format msgid "network printer port" msgstr "порт на мрежов принтер " #: standalone/harddrake2:53 #, fuzzy, c-format msgid "Primary partitions" msgstr "Форматиране на дялове" #: standalone/harddrake2:53 #, fuzzy, c-format msgid "the number of the primary partitions" msgstr "номерът на процесора" #: standalone/harddrake2:54 #, c-format msgid "the vendor name of the device" msgstr "името на производителя на устройството" #: standalone/harddrake2:55 #, c-format msgid "Bus PCI #" msgstr "" #: standalone/harddrake2:55 #, fuzzy, c-format msgid "the PCI bus on which the device is plugged" msgstr "" "това е физическата шина на който е закачено устроството (напр: PCI, USB, ...)" #: standalone/harddrake2:56 #, fuzzy, c-format msgid "PCI device #" msgstr "Услуги" #: standalone/harddrake2:56 #, fuzzy, c-format msgid "PCI device number" msgstr "номер" #: standalone/harddrake2:57 #, c-format msgid "PCI function #" msgstr "" #: standalone/harddrake2:57 #, fuzzy, c-format msgid "PCI function number" msgstr "Име на връзката" #: standalone/harddrake2:58 #, fuzzy, c-format msgid "Vendor ID" msgstr "Производител" #: standalone/harddrake2:58 #, c-format msgid "this is the standard numerical identifier of the vendor" msgstr "" #: standalone/harddrake2:59 #, fuzzy, c-format msgid "Device ID" msgstr "Устройство: " #: standalone/harddrake2:59 #, fuzzy, c-format msgid "this is the numerical identifier of the device" msgstr "името на производителя на устройството" #: standalone/harddrake2:60 #, c-format msgid "Sub vendor ID" msgstr "" #: standalone/harddrake2:60 #, c-format msgid "this is the minor numerical identifier of the vendor" msgstr "" #: standalone/harddrake2:61 #, fuzzy, c-format msgid "Sub device ID" msgstr "Услуги" #: standalone/harddrake2:61 #, fuzzy, c-format msgid "this is the minor numerical identifier of the device" msgstr "името на производителя на устройството" #: standalone/harddrake2:62 #, fuzzy, c-format msgid "Device USB ID" msgstr "Устройство: " #: standalone/harddrake2:62 #, c-format msgid ".." msgstr "" #: standalone/harddrake2:66 #, c-format msgid "Bogomips" msgstr "Богомипс" #: standalone/harddrake2:66 #, c-format msgid "" "the GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" #: standalone/harddrake2:67 #, c-format msgid "Cache size" msgstr "Размер на кеш" #: standalone/harddrake2:67 #, c-format msgid "size of the (second level) cpu cache" msgstr "Размер на вторичен кеш на cpu" #. -PO: here "comas" is the medical coma, not the lexical coma!! #: standalone/harddrake2:70 #, c-format msgid "Coma bug" msgstr "" #: standalone/harddrake2:70 #, c-format msgid "whether this cpu has the Cyrix 6x86 Coma bug" msgstr "" #: standalone/harddrake2:71 #, c-format msgid "Cpuid family" msgstr "" #: standalone/harddrake2:71 #, c-format msgid "family of the cpu (eg: 6 for i686 class)" msgstr "фамилия cpu (напр: 6 за i686 клас)" #: standalone/harddrake2:72 #, c-format msgid "Cpuid level" msgstr "Cpuid ниво" #: standalone/harddrake2:72 #, c-format msgid "information level that can be obtained through the cpuid instruction" msgstr "" "информационно ниво, което може да бъде получено чрез инструкцията cpuid" #: standalone/harddrake2:73 #, c-format msgid "Frequency (MHz)" msgstr "Честорта (MHz)" #: standalone/harddrake2:73 #, c-format msgid "" "the CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "Честота на процесора в Mhz" #: standalone/harddrake2:74 #, c-format msgid "Flags" msgstr "Флагове" #: standalone/harddrake2:74 #, c-format msgid "CPU flags reported by the kernel" msgstr "Флагове на CPU съобщени от ядрото" #: standalone/harddrake2:75 #, c-format msgid "Fdiv bug" msgstr "" #: standalone/harddrake2:76 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" #: standalone/harddrake2:77 #, c-format msgid "Is FPU present" msgstr "" #: standalone/harddrake2:77 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "" #: standalone/harddrake2:78 #, c-format msgid "Whether the FPU has an irq vector" msgstr "" #: standalone/harddrake2:78 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" #: standalone/harddrake2:79 #, c-format msgid "F00f bug" msgstr "" #: standalone/harddrake2:79 #, c-format msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "" "предишните чипове на пентиум бяха бъгваи и забиваха при декодиране на F00F " "кода" #: standalone/harddrake2:80 #, c-format msgid "Halt bug" msgstr "" #: standalone/harddrake2:81 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" #: standalone/harddrake2:82 #, c-format msgid "sub generation of the cpu" msgstr "" #: standalone/harddrake2:83 #, c-format msgid "generation of the cpu (eg: 8 for Pentium III, ...)" msgstr "Поколение на процесора (напр: 8 за Pentium III, ...)" #: standalone/harddrake2:84 #, c-format msgid "Model name" msgstr "Име на модел" #: standalone/harddrake2:84 #, c-format msgid "official vendor name of the cpu" msgstr "името на производителя на процесора" #: standalone/harddrake2:85 #, c-format msgid "the name of the CPU" msgstr "име на процесора" #: standalone/harddrake2:86 #, c-format msgid "Processor ID" msgstr "Процесор ID" #: standalone/harddrake2:86 #, c-format msgid "the number of the processor" msgstr "номерът на процесора" #: standalone/harddrake2:87 #, fuzzy, c-format msgid "Model stepping" msgstr "Форматиране" #: standalone/harddrake2:87 #, c-format msgid "stepping of the cpu (sub model (generation) number)" msgstr "" #: standalone/harddrake2:88 #, c-format msgid "the vendor name of the processor" msgstr "името на производителя на процесора" #: standalone/harddrake2:89 #, c-format msgid "Write protection" msgstr "Защита от запис" #: standalone/harddrake2:89 #, c-format msgid "" "the WP flag in the CR0 register of the cpu enforce write protection at the " "memory page level, thus enabling the processor to prevent unchecked kernel " "accesses to user memory (aka this is a bug guard)" msgstr "" #: standalone/harddrake2:93 #, c-format msgid "Floppy format" msgstr "Форматира флопи" #: standalone/harddrake2:93 #, c-format msgid "format of floppies supported by the drive" msgstr "" #: standalone/harddrake2:97 #, c-format msgid "Channel" msgstr "Канал" #: standalone/harddrake2:97 #, c-format msgid "EIDE/SCSI channel" msgstr "EIDE/SCSI канал" #: standalone/harddrake2:98 #, fuzzy, c-format msgid "Disk identifier" msgstr "Принтер" #: standalone/harddrake2:98 #, c-format msgid "usually the disk serial number" msgstr "" #: standalone/harddrake2:99 #, fuzzy, c-format msgid "Logical unit number" msgstr "Име на logical volume" #: standalone/harddrake2:99 #, c-format msgid "" "the SCSI target number (LUN). SCSI devices connected to a host are uniquely " "identified by a\n" "channel number, a target id and a logical unit number" msgstr "" #. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...) #: standalone/harddrake2:106 #, fuzzy, c-format msgid "Installed size" msgstr "Инсталиране на системата" #: standalone/harddrake2:106 #, c-format msgid "Installed size of the memory bank" msgstr "" #: standalone/harddrake2:107 #, fuzzy, c-format msgid "Enabled Size" msgstr "включи" #: standalone/harddrake2:107 #, c-format msgid "Enabled size of the memory bank" msgstr "" #: standalone/harddrake2:108 #, fuzzy, c-format msgid "type of the memory device" msgstr "името на производителя на устройството" #: standalone/harddrake2:109 #, c-format msgid "Speed" msgstr "Скорост" #: standalone/harddrake2:109 #, c-format msgid "Speed of the memory bank" msgstr "" #: standalone/harddrake2:110 #, fuzzy, c-format msgid "Bank connections" msgstr "Кабелна връзка" #: standalone/harddrake2:111 #, c-format msgid "Socket designation of the memory bank" msgstr "" #: standalone/harddrake2:115 #, fuzzy, c-format msgid "Device file" msgstr "Стар файл на устроство" #: standalone/harddrake2:115 #, c-format msgid "" "the device file used to communicate with the kernel driver for the mouse" msgstr "" #: standalone/harddrake2:116 #, c-format msgid "Emulated wheel" msgstr "" #: standalone/harddrake2:116 #, fuzzy, c-format msgid "whether the wheel is emulated or not" msgstr "3 бутона с емулация на колелце" #: standalone/harddrake2:117 #, fuzzy, c-format msgid "the type of the mouse" msgstr "Моля, пробвайте мишката си" #: standalone/harddrake2:118 #, fuzzy, c-format msgid "the name of the mouse" msgstr "име на процесора" #: standalone/harddrake2:119 #, c-format msgid "Number of buttons" msgstr "Брой бутони" #: standalone/harddrake2:119 #, c-format msgid "the number of buttons the mouse has" msgstr "брой бутони на мишката" #: standalone/harddrake2:120 #, c-format msgid "the type of bus on which the mouse is connected" msgstr "Моля, изберете типа на шината към която е свързана мишката ви." #: standalone/harddrake2:121 #, c-format msgid "Mouse protocol used by X11" msgstr "" #: standalone/harddrake2:121 #, c-format msgid "the protocol that the graphical desktop use with the mouse" msgstr "" #: standalone/harddrake2:128 standalone/harddrake2:137 #: standalone/harddrake2:144 standalone/harddrake2:152 #: standalone/harddrake2:322 #, c-format msgid "Identification" msgstr "Идентификация" #: standalone/harddrake2:129 standalone/harddrake2:145 #, c-format msgid "Connection" msgstr "Връзка" #: standalone/harddrake2:138 #, fuzzy, c-format msgid "Performances" msgstr "Настройки" #: standalone/harddrake2:139 #, fuzzy, c-format msgid "Bugs" msgstr "Шина" #: standalone/harddrake2:140 #, c-format msgid "FPU" msgstr "" #: standalone/harddrake2:147 #, c-format msgid "Device" msgstr "Устройство" #: standalone/harddrake2:148 #, c-format msgid "Partitions" msgstr "Дялове" #: standalone/harddrake2:153 #, c-format msgid "Features" msgstr "Особености" #. -PO: please keep all "/" characters !!! #: standalone/harddrake2:176 standalone/logdrake:76 #: standalone/printerdrake:146 standalone/printerdrake:159 #: standalone/printerdrake:171 #, c-format msgid "/_Options" msgstr "/_Опции" #: standalone/harddrake2:177 standalone/harddrake2:203 standalone/logdrake:78 #: standalone/printerdrake:172 standalone/printerdrake:174 #: standalone/printerdrake:177 standalone/printerdrake:179 #, c-format msgid "/_Help" msgstr "/_Помощ" #: standalone/harddrake2:181 #, c-format msgid "/Autodetect _printers" msgstr "/Автоматично открива _принтери" #: standalone/harddrake2:182 #, c-format msgid "/Autodetect _modems" msgstr "/Автоматично открива _модеми" #: standalone/harddrake2:183 #, c-format msgid "/Autodetect _jaz drives" msgstr "/Автоматично открива _jaz устройства" #: standalone/harddrake2:184 #, c-format msgid "/Autodetect parallel _zip drives" msgstr "" #: standalone/harddrake2:191 #, c-format msgid "/_Upload the hardware list" msgstr "" #: standalone/harddrake2:192 standalone/printerdrake:152 #, c-format msgid "/_Quit" msgstr "/_Излиза" #: standalone/harddrake2:205 #, c-format msgid "/_Fields description" msgstr "/_Полета описание" #: standalone/harddrake2:207 #, c-format msgid "Harddrake help" msgstr "Harddrake помощ" #: standalone/harddrake2:216 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" #: standalone/harddrake2:222 standalone/printerdrake:177 #, c-format msgid "/_Report Bug" msgstr "/_Информирай за бъг" #: standalone/harddrake2:224 standalone/printerdrake:179 #, c-format msgid "/_About..." msgstr "/_Относно..." #: standalone/harddrake2:225 #, c-format msgid "About Harddrake" msgstr "Относно Harddrake" #. -PO: Do not alter the and tags #: standalone/harddrake2:227 #, c-format msgid "" "This is HardDrake, a %s hardware configuration tool.\n" "Version: %s\n" "Author: Thierry Vignaud <" "tvignaud@mandriva.com>\n" "\n" msgstr "" "Това е HardDrake, хардуерен конфигурационен инструмент на %s.\n" "Версия: %s\n" "Автор: Thierry Vignaud <" "tvignaud@mandriva.com>\n" "\n" #: standalone/harddrake2:242 #, fuzzy, c-format msgid "Harddrake2" msgstr "ХардДрейк" #: standalone/harddrake2:253 #, c-format msgid "Detected hardware" msgstr "Открит хардуер" #: standalone/harddrake2:258 #, c-format msgid "Configure module" msgstr "Настройка на модул" #: standalone/harddrake2:265 #, c-format msgid "Run config tool" msgstr "Изпълнява инструмент за конфигуриране" #: standalone/harddrake2:289 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "" #: standalone/harddrake2:310 standalone/printerdrake:306 #: standalone/printerdrake:320 #, c-format msgid "Unknown" msgstr "Неизвестен" #: standalone/harddrake2:330 #, c-format msgid "Misc" msgstr "Разни" #: standalone/harddrake2:406 #, c-format msgid "secondary" msgstr "втори" #: standalone/harddrake2:406 #, c-format msgid "primary" msgstr "първи" #: standalone/harddrake2:410 #, c-format msgid "burner" msgstr "записвачка" #: standalone/harddrake2:410 #, c-format msgid "DVD" msgstr "DVD" #: standalone/harddrake2:558 standalone/harddrake2:561 #, c-format msgid "Upload the hardware list" msgstr "" #: standalone/harddrake2:563 #, c-format msgid "Account:" msgstr "Сметка:" #: standalone/harddrake2:565 #, c-format msgid "Hostname:" msgstr "Име на хост:" #: standalone/keyboarddrake:30 #, c-format msgid "Please, choose your keyboard layout." msgstr "Моля, изберете подреждане на клавиатурата." #: standalone/keyboarddrake:45 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "Искате ли BackSpace да подава Delete на конзолата ?" #: standalone/localedrake:38 #, c-format msgid "LocaleDrake" msgstr "ЛокаленДрейк" #: standalone/localedrake:44 #, fuzzy, c-format msgid "You should install the following packages: %s" msgstr "Инсталиране на пакета %s" #. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit" #: standalone/localedrake:47 standalone/scannerdrake:135 #, c-format msgid ", " msgstr ", " #: standalone/localedrake:55 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "Промените са запазени, но за да бъдат ефективни трябва да излезете" #: standalone/logdrake:49 #, fuzzy, c-format msgid "Mandriva Linux Tools Logs" msgstr "Самостоятелни инструменти" #: standalone/logdrake:50 #, c-format msgid "Logdrake" msgstr "логдрейк" #: standalone/logdrake:63 #, c-format msgid "Show only for the selected day" msgstr "Показва само за избраният ден" #: standalone/logdrake:70 #, c-format msgid "/File/_New" msgstr "/Файл/_Нов" #: standalone/logdrake:70 #, c-format msgid "N" msgstr "N" #: standalone/logdrake:71 #, c-format msgid "/File/_Open" msgstr "/Файл/_Отвори" #: standalone/logdrake:71 #, c-format msgid "O" msgstr "O" #: standalone/logdrake:72 #, c-format msgid "/File/_Save" msgstr "/Файл/_Запис" #: standalone/logdrake:72 #, c-format msgid "S" msgstr "S" #: standalone/logdrake:73 #, c-format msgid "/File/Save _As" msgstr "/Файл/Запис _като" #: standalone/logdrake:74 #, c-format msgid "/File/-" msgstr "/Файл/-" #: standalone/logdrake:77 #, c-format msgid "/Options/Test" msgstr "/Опции/Тест" #: standalone/logdrake:79 #, c-format msgid "/Help/_About..." msgstr "/Помощ/_Относно..." #: standalone/logdrake:108 #, c-format msgid "" "_:this is the auth.log log file\n" "Authentication" msgstr "" #: standalone/logdrake:109 #, c-format msgid "" "_:this is the user.log log file\n" "User" msgstr "" #: standalone/logdrake:110 #, c-format msgid "" "_:this is the /var/log/messages log file\n" "Messages" msgstr "" #: standalone/logdrake:111 #, c-format msgid "" "_:this is the /var/log/syslog log file\n" "Syslog" msgstr "" #: standalone/logdrake:115 #, c-format msgid "search" msgstr "търси" #: standalone/logdrake:127 #, c-format msgid "A tool to monitor your logs" msgstr "Инструмент за преглеждане на вашите лог файлове" #: standalone/logdrake:128 standalone/net_applet:342 standalone/net_monitor:93 #, c-format msgid "Settings" msgstr "Настройки" #: standalone/logdrake:133 #, c-format msgid "Matching" msgstr "съвпадение" #: standalone/logdrake:134 #, c-format msgid "but not matching" msgstr "но не съвпада" #: standalone/logdrake:138 #, c-format msgid "Choose file" msgstr "Изберете файл" #: standalone/logdrake:150 #, c-format msgid "Calendar" msgstr "Календар" #: standalone/logdrake:160 #, c-format msgid "Content of the file" msgstr "Съдържание на файла" #: standalone/logdrake:164 standalone/logdrake:402 #, c-format msgid "Mail alert" msgstr "Подредба на поща" #: standalone/logdrake:171 #, c-format msgid "The alert wizard has failed unexpectedly:" msgstr "" #: standalone/logdrake:224 #, c-format msgid "please wait, parsing file: %s" msgstr "моля изчакайте, правя разбор на файл: %s" #: standalone/logdrake:379 #, c-format msgid "Apache World Wide Web Server" msgstr "Apache World Wide Web Сървър" #: standalone/logdrake:380 #, c-format msgid "Domain Name Resolver" msgstr "Domain Name Resolver" #: standalone/logdrake:381 #, c-format msgid "Ftp Server" msgstr "Ftp Сървър" #: standalone/logdrake:382 #, c-format msgid "Postfix Mail Server" msgstr "Postfix Пощенски сървър" #: standalone/logdrake:383 #, c-format msgid "Samba Server" msgstr "Samba Сървър" #: standalone/logdrake:385 #, c-format msgid "Webmin Service" msgstr "Webmin Обслужване" #: standalone/logdrake:386 #, c-format msgid "Xinetd Service" msgstr "Xinetd обслужване" #: standalone/logdrake:397 #, fuzzy, c-format msgid "Configure the mail alert system" msgstr "Промяна системата за печат" #: standalone/logdrake:398 #, c-format msgid "Stop the mail alert system" msgstr "" #: standalone/logdrake:405 #, c-format msgid "Mail alert configuration" msgstr "Конфигурация за подредба на поща" #: standalone/logdrake:406 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" "Добре дошли в настройката на е-поща.\n" "\n" "Тук можете да укажете предопитанията си за известяващата система.\n" #: standalone/logdrake:409 #, c-format msgid "What do you want to do?" msgstr "Какво искате да направите?" #: standalone/logdrake:416 #, fuzzy, c-format msgid "Services settings" msgstr "установяване на обслужвания" #: standalone/logdrake:417 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "" "Вие ще получите тревога ако едно от изброените обслужвания не се изпълнява " "повече" #: standalone/logdrake:424 #, fuzzy, c-format msgid "Load setting" msgstr "установяване на натоварване" #: standalone/logdrake:425 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "Вие ще получите тревога ако натоварването е по-високо от тази стойност" #: standalone/logdrake:426 #, c-format msgid "" "_: load here is a noun, the load of the system\n" "Load" msgstr "" #: standalone/logdrake:431 #, fuzzy, c-format msgid "Alert configuration" msgstr "конфигурация на тревога" #: standalone/logdrake:432 #, c-format msgid "Please enter your email address below " msgstr "Моля, въведете долу вашият адрес на Ел. поща" #: standalone/logdrake:433 #, c-format msgid "and enter the name (or the IP) of the SMTP server you wish to use" msgstr "" #: standalone/logdrake:452 #, c-format msgid "The wizard successfully configured the mail alert." msgstr "" #: standalone/logdrake:458 #, c-format msgid "The wizard successfully disabled the mail alert." msgstr "" #: standalone/logdrake:517 #, c-format msgid "Save as.." msgstr "Запази като..." #: standalone/mousedrake:31 #, c-format msgid "Please choose your mouse type." msgstr "Моля, изберете тип на мишката." #: standalone/mousedrake:44 #, c-format msgid "Emulate third button?" msgstr "Да симулирам ли трети бутон ?" #: standalone/mousedrake:61 #, c-format msgid "Mouse test" msgstr "Проверка на мишката" #: standalone/mousedrake:64 #, c-format msgid "Please test your mouse:" msgstr "Моля, пробвайте мишката си" #: standalone/net_applet:47 #, fuzzy, c-format msgid "Network is up on interface %s" msgstr "Мрежов интерфейс" #. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below #: standalone/net_applet:50 #, fuzzy, c-format msgid "Network is down on interface %s. Click on \"Configure Network\"" msgstr "Функционалността на мрежата не е настроена" #: standalone/net_applet:56 standalone/net_applet:76 #: standalone/net_monitor:468 #, c-format msgid "Connect %s" msgstr "Свързва %s" #: standalone/net_applet:57 standalone/net_applet:76 #: standalone/net_monitor:468 #, c-format msgid "Disconnect %s" msgstr "Разкачва %s" #: standalone/net_applet:58 #, fuzzy, c-format msgid "Monitor Network" msgstr "Възстановява през мрежа" #: standalone/net_applet:60 #, c-format msgid "Manage wireless networks" msgstr "" #: standalone/net_applet:61 #, c-format msgid "Configure Network" msgstr "Конфигуриране на мрежа" #: standalone/net_applet:63 #, fuzzy, c-format msgid "Watched interface" msgstr "Интерфейс" #: standalone/net_applet:93 #, c-format msgid "Profiles" msgstr "Профили" #: standalone/net_applet:102 #, c-format msgid "Get Online Help" msgstr "" #: standalone/net_applet:330 #, c-format msgid "Interactive Firewall automatic mode" msgstr "" #: standalone/net_applet:335 #, c-format msgid "Always launch on startup" msgstr "Винаги зареждай при стартиране" #: standalone/net_applet:339 #, fuzzy, c-format msgid "Wireless networks" msgstr "Безжична връзка" #: standalone/net_applet:424 #, fuzzy, c-format msgid "Interactive Firewall: intrusion detected" msgstr "Открита е настройка на Защитна Стена !" #: standalone/net_applet:437 #, fuzzy, c-format msgid "What do you want to do with this attacker?" msgstr "Искате ли да завършите играта?" #: standalone/net_applet:440 #, fuzzy, c-format msgid "Attack details" msgstr "Без подробности" #: standalone/net_applet:444 #, fuzzy, c-format msgid "Attack time: %s" msgstr "Действие:%s" #: standalone/net_applet:445 #, c-format msgid "Network interface: %s" msgstr "Мрежов интерфейс: %s" #: standalone/net_applet:446 #, fuzzy, c-format msgid "Attack type: %s" msgstr "тип: %s" #: standalone/net_applet:447 #, c-format msgid "Protocol: %s" msgstr "Протокол: %s" #: standalone/net_applet:448 #, fuzzy, c-format msgid "Attacker IP address: %s" msgstr "Статичен IP адрес" #: standalone/net_applet:449 #, fuzzy, c-format msgid "Attacker hostname: %s" msgstr "Установявам име на хост %s: " #: standalone/net_applet:452 #, fuzzy, c-format msgid "Service attacked: %s" msgstr "_Тип услуга:" #: standalone/net_applet:453 #, fuzzy, c-format msgid "Port attacked: %s" msgstr "Порт: %s" #: standalone/net_applet:455 #, c-format msgid "Type of ICMP attack: %s" msgstr "" #: standalone/net_applet:460 #, c-format msgid "Always blacklist (do not ask again)" msgstr "" #: standalone/net_monitor:57 standalone/net_monitor:62 #, c-format msgid "Network Monitoring" msgstr "Мониторинг на мрежата" #: standalone/net_monitor:98 #, fuzzy, c-format msgid "Global statistics" msgstr "Статистики" #: standalone/net_monitor:101 #, c-format msgid "Instantaneous" msgstr "" #: standalone/net_monitor:101 #, c-format msgid "Average" msgstr "Средно" #: standalone/net_monitor:102 #, fuzzy, c-format msgid "" "Sending\n" "speed:" msgstr "Скорост на изпращане:" #: standalone/net_monitor:103 #, fuzzy, c-format msgid "" "Receiving\n" "speed:" msgstr "Скорост на получаване:" #: standalone/net_monitor:107 #, fuzzy, c-format msgid "" "Connection\n" "time: " msgstr "Време на връзката: " #: standalone/net_monitor:114 #, c-format msgid "Use same scale for received and transmitted" msgstr "" #: standalone/net_monitor:133 #, c-format msgid "Wait please, testing your connection..." msgstr "Почакайте, пробвам вашата връзка..." #: standalone/net_monitor:182 standalone/net_monitor:195 #, c-format msgid "Disconnecting from Internet " msgstr "Разкачвам от Интернет " #: standalone/net_monitor:182 standalone/net_monitor:195 #, c-format msgid "Connecting to Internet " msgstr "Свързвам към Интернет" #: standalone/net_monitor:226 #, c-format msgid "Disconnection from Internet failed." msgstr "Разкачването от Интернет е неуспешно" #: standalone/net_monitor:227 #, c-format msgid "Disconnection from Internet complete." msgstr "Разкачването от Интернет е завършено" #: standalone/net_monitor:229 #, c-format msgid "Connection complete." msgstr "Връзката е установена." #: standalone/net_monitor:230 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandriva Linux Control Center." msgstr "" "Връзката пропадна.\n" "Проверете си конфигурацията в Контролен център на Mandriva Linux." #: standalone/net_monitor:335 #, c-format msgid "Color configuration" msgstr "Конфигурация на цвят" #: standalone/net_monitor:383 standalone/net_monitor:403 #, c-format msgid "sent: " msgstr "изпраща: " #: standalone/net_monitor:390 standalone/net_monitor:407 #, c-format msgid "received: " msgstr "получено: " #: standalone/net_monitor:397 #, c-format msgid "average" msgstr "средно" #: standalone/net_monitor:400 #, c-format msgid "Local measure" msgstr "Локално измерване" #: standalone/net_monitor:461 #, c-format msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "" #: standalone/net_monitor:472 #, fuzzy, c-format msgid "No internet connection configured" msgstr "Настройка на Интернет връзка" #: standalone/printerdrake:76 #, c-format msgid "Reading data of installed printers..." msgstr "Четене на информация от инсталираните принтери ..." #: standalone/printerdrake:128 #, fuzzy, c-format msgid "%s Printer Management Tool" msgstr "Работа със сметки \n" #: standalone/printerdrake:142 standalone/printerdrake:143 #: standalone/printerdrake:144 standalone/printerdrake:145 #: standalone/printerdrake:153 standalone/printerdrake:154 #: standalone/printerdrake:158 #, c-format msgid "/_Actions" msgstr "/_Действия" #: standalone/printerdrake:142 standalone/printerdrake:154 #, c-format msgid "/_Add Printer" msgstr "/_Добавяне на принтер" #: standalone/printerdrake:143 #, c-format msgid "/Set as _Default" msgstr "/(По подразбиране)" #: standalone/printerdrake:144 #, c-format msgid "/_Edit" msgstr "/_Промени" #: standalone/printerdrake:145 #, c-format msgid "/_Delete" msgstr "/_Изтрий" #: standalone/printerdrake:146 #, c-format msgid "/_Expert mode" msgstr "/_Разширени функиции" #: standalone/printerdrake:151 #, c-format msgid "/_Refresh" msgstr "/_Опресни" #: standalone/printerdrake:158 #, c-format msgid "/_Configure CUPS" msgstr "/_Настройка на CUPS" #: standalone/printerdrake:171 #, fuzzy, c-format msgid "/Configure _Auto Administration" msgstr "Отдалечена администрация" #: standalone/printerdrake:194 #, c-format msgid "Search:" msgstr "Търси:" #: standalone/printerdrake:197 #, c-format msgid "Apply filter" msgstr "Използва филтър" #: standalone/printerdrake:224 standalone/printerdrake:231 #, c-format msgid "Def." msgstr "" #: standalone/printerdrake:224 standalone/printerdrake:231 #, c-format msgid "Printer Name" msgstr "Име на принтер" #: standalone/printerdrake:224 #, c-format msgid "Connection Type" msgstr "Тип на връзка" #: standalone/printerdrake:231 #, c-format msgid "Server Name" msgstr "Име на сървър" #. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:239 #, c-format msgid "Add Printer" msgstr "Добавяне принтер" #: standalone/printerdrake:239 #, fuzzy, c-format msgid "Add a new printer to the system" msgstr "Добавя потребител към системата" #. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:242 #, c-format msgid "Set as default" msgstr "Подразбиращ се избор" #: standalone/printerdrake:242 #, fuzzy, c-format msgid "Set selected printer as the default printer" msgstr "Определи този принтер за ползване по подразбиране" #: standalone/printerdrake:245 #, fuzzy, c-format msgid "Edit selected printer" msgstr "Настройка на избрания сървър" #: standalone/printerdrake:248 #, fuzzy, c-format msgid "Delete selected printer" msgstr "Изтрива избраното правило" #: standalone/printerdrake:251 #, c-format msgid "Refresh the list" msgstr "Опресни списъка с потребителите" #. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:254 #, c-format msgid "Configure CUPS" msgstr "Настройка на CUPS" #: standalone/printerdrake:254 #, fuzzy, c-format msgid "Configure CUPS printing system" msgstr "Промяна системата за печат" #: standalone/printerdrake:310 standalone/printerdrake:324 #: standalone/printerdrake:348 standalone/printerdrake:360 #, c-format msgid "Enabled" msgstr "Разрешено" #: standalone/printerdrake:310 standalone/printerdrake:324 #: standalone/printerdrake:348 standalone/printerdrake:360 #, c-format msgid "Disabled" msgstr "Изключена" #: standalone/printerdrake:596 #, c-format msgid "Authors: " msgstr "Автори:" #. -PO: here %s is the version number #: standalone/printerdrake:606 #, fuzzy, c-format msgid "Printer Management %s" msgstr "Работа със сметки \n" #: standalone/scannerdrake:51 #, fuzzy, c-format msgid "" "SANE packages need to be installed to use scanners.\n" "\n" "Do you want to install the SANE packages?" msgstr "" "Пакет %s трябва да бъде инсталиран\n" "Искате да го инсталирате?" #: standalone/scannerdrake:55 #, fuzzy, c-format msgid "Aborting Scannerdrake." msgstr "Скенердрейк" #: standalone/scannerdrake:60 #, c-format msgid "" "Could not install the packages needed to set up a scanner with Scannerdrake." msgstr "" #: standalone/scannerdrake:61 #, c-format msgid "Scannerdrake will not be started now." msgstr "" #: standalone/scannerdrake:67 standalone/scannerdrake:491 #, c-format msgid "Searching for configured scanners..." msgstr "Търсене на настроени скенери..." #: standalone/scannerdrake:71 standalone/scannerdrake:495 #, c-format msgid "Searching for new scanners..." msgstr "Търсене на нови скенери ..." #: standalone/scannerdrake:79 standalone/scannerdrake:517 #, c-format msgid "Re-generating list of configured scanners..." msgstr "" #: standalone/scannerdrake:101 #, fuzzy, c-format msgid "The %s is not supported by this version of %s." msgstr "%s не се подържа от тази версия на Mandriva Linux." #: standalone/scannerdrake:104 #, c-format msgid "%s found on %s, configure it automatically?" msgstr "%s намерено на %s, да конфигурирам автоматично?" #: standalone/scannerdrake:116 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "%s не е в базата данни на скенера, да конфигурирам ръчно?" #: standalone/scannerdrake:131 #, c-format msgid "Select a scanner model" msgstr "Изберете модел на скенера" #: standalone/scannerdrake:132 #, c-format msgid " (" msgstr " (" #: standalone/scannerdrake:133 #, c-format msgid "Detected model: %s" msgstr "Засечен модел: %s" #: standalone/scannerdrake:136 #, c-format msgid "Port: %s" msgstr "Порт: %s" #: standalone/scannerdrake:138 standalone/scannerdrake:141 #, c-format msgid " (UNSUPPORTED)" msgstr "" #: standalone/scannerdrake:144 #, fuzzy, c-format msgid "The %s is not supported under Linux." msgstr "%s не се подържа от тази версия на Mandriva Linux." #: standalone/scannerdrake:171 standalone/scannerdrake:185 #, c-format msgid "Do not install firmware file" msgstr "" #: standalone/scannerdrake:175 standalone/scannerdrake:227 #, c-format msgid "" "It is possible that your %s needs its firmware to be uploaded everytime when " "it is turned on." msgstr "" #: standalone/scannerdrake:176 standalone/scannerdrake:228 #, c-format msgid "If this is the case, you can make this be done automatically." msgstr "" #: standalone/scannerdrake:177 standalone/scannerdrake:231 #, c-format msgid "" "To do so, you need to supply the firmware file for your scanner so that it " "can be installed." msgstr "" #: standalone/scannerdrake:178 standalone/scannerdrake:232 #, c-format msgid "" "You find the file on the CD or floppy coming with the scanner, on the " "manufacturer's home page, or on your Windows partition." msgstr "" #: standalone/scannerdrake:180 standalone/scannerdrake:239 #, c-format msgid "Install firmware file from" msgstr "" #: standalone/scannerdrake:200 #, fuzzy, c-format msgid "Select firmware file" msgstr "Изберете файл" #: standalone/scannerdrake:203 standalone/scannerdrake:262 #, c-format msgid "The firmware file %s does not exist or is unreadable!" msgstr "" #: standalone/scannerdrake:226 #, c-format msgid "" "It is possible that your scanners need their firmware to be uploaded " "everytime when they are turned on." msgstr "" #: standalone/scannerdrake:230 #, c-format msgid "" "To do so, you need to supply the firmware files for your scanners so that it " "can be installed." msgstr "" #: standalone/scannerdrake:233 #, c-format msgid "" "If you have already installed your scanner's firmware you can update the " "firmware here by supplying the new firmware file." msgstr "" #: standalone/scannerdrake:235 #, c-format msgid "Install firmware for the" msgstr "" #: standalone/scannerdrake:258 #, fuzzy, c-format msgid "Select firmware file for the %s" msgstr "Изберете файл" #: standalone/scannerdrake:276 #, fuzzy, c-format msgid "Could not install the firmware file for the %s!" msgstr "Изберете файл" #: standalone/scannerdrake:289 #, c-format msgid "The firmware file for your %s was successfully installed." msgstr "" #: standalone/scannerdrake:299 #, c-format msgid "The %s is unsupported" msgstr "%s не се подържа" #: standalone/scannerdrake:304 #, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the %s Control Center in Hardware section." msgstr "" #: standalone/scannerdrake:308 standalone/scannerdrake:315 #: standalone/scannerdrake:345 #, c-format msgid "Auto-detect available ports" msgstr "Автоматично засичане на портовете" #: standalone/scannerdrake:310 standalone/scannerdrake:356 #, c-format msgid "Please select the device where your %s is attached" msgstr "" #: standalone/scannerdrake:311 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "" #: standalone/scannerdrake:313 standalone/scannerdrake:358 #, c-format msgid "choose device" msgstr "избира устройство" #: standalone/scannerdrake:347 #, c-format msgid "Searching for scanners..." msgstr "Търсене на скенери ..." #: standalone/scannerdrake:383 #, fuzzy, c-format msgid "Setting up kernel modules..." msgstr "Зареждам модул на ядроро за USB принтер..." #: standalone/scannerdrake:390 standalone/scannerdrake:397 #, fuzzy, c-format msgid "Attention!" msgstr "Атракцион" #: standalone/scannerdrake:391 #, c-format msgid "" "Your %s cannot be configured fully automatically.\n" "\n" "Manual adjustments are required. Please edit the configuration file /etc/" "sane.d/%s.conf. " msgstr "" #: standalone/scannerdrake:392 standalone/scannerdrake:401 #, c-format msgid "" "More info in the driver's manual page. Run the command \"man sane-%s\" to " "read it." msgstr "" #: standalone/scannerdrake:394 standalone/scannerdrake:403 #, fuzzy, c-format msgid "" "After that you may scan documents using \"XSane\" or \"Kooka\" from " "Multimedia/Graphics in the applications menu." msgstr "" "Вашият %s бе конфигуриран.\n" "Вече можете да сканирате документи,използвайки \"XSane\" от менюто " "Мултимедия/Графики" #: standalone/scannerdrake:398 #, c-format msgid "" "Your %s has been configured, but it is possible that additional manual " "adjustments are needed to get it to work. " msgstr "" #: standalone/scannerdrake:399 #, c-format msgid "" "If it does not appear in the list of configured scanners in the main window " "of Scannerdrake or if it does not work correctly, " msgstr "" #: standalone/scannerdrake:400 #, c-format msgid "edit the configuration file /etc/sane.d/%s.conf. " msgstr "" #: standalone/scannerdrake:406 #, fuzzy, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/" "Graphics in the applications menu." msgstr "" "Вашият %s бе конфигуриран.\n" "Вече можете да сканирате документи,използвайки \"XSane\" от менюто " "Мултимедия/Графики" #: standalone/scannerdrake:431 #, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "" "Имате следните скенери\n" "\n" "%s\n" "на вашата система\n" #: standalone/scannerdrake:432 #, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "" "Следният скенер\n" "\n" "%s\n" "е на разположение на системата ви.\n" #: standalone/scannerdrake:435 standalone/scannerdrake:438 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "" #: standalone/scannerdrake:452 #, c-format msgid "Search for new scanners" msgstr "Търсене за нови скенери" #: standalone/scannerdrake:458 #, c-format msgid "Add a scanner manually" msgstr "" #: standalone/scannerdrake:465 #, fuzzy, c-format msgid "Install/Update firmware files" msgstr "Изберете файл" #: standalone/scannerdrake:471 #, c-format msgid "Scanner sharing" msgstr "Споделяне на скенери" #: standalone/scannerdrake:530 standalone/scannerdrake:695 #, c-format msgid "All remote machines" msgstr "Всички отдалечени машини" #: standalone/scannerdrake:542 standalone/scannerdrake:845 #, c-format msgid "This machine" msgstr "Тази машина" #: standalone/scannerdrake:582 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessible by remote machines and by which remote machines." msgstr "" #: standalone/scannerdrake:583 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" #: standalone/scannerdrake:586 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "" #: standalone/scannerdrake:588 #, c-format msgid "Scanner sharing to hosts: " msgstr "Поделяне на скенера за следните хостове:" #: standalone/scannerdrake:602 #, c-format msgid "Use scanners on remote computers" msgstr "" #: standalone/scannerdrake:605 #, c-format msgid "Use the scanners on hosts: " msgstr "" #: standalone/scannerdrake:632 standalone/scannerdrake:704 #: standalone/scannerdrake:854 #, c-format msgid "Sharing of local scanners" msgstr "Споделяне на локални скенери" #: standalone/scannerdrake:633 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "" #: standalone/scannerdrake:644 standalone/scannerdrake:794 #, c-format msgid "Add host" msgstr "Добавяне на хост" #: standalone/scannerdrake:650 standalone/scannerdrake:800 #, c-format msgid "Edit selected host" msgstr "Настройка на избрания хост" #: standalone/scannerdrake:659 standalone/scannerdrake:809 #, c-format msgid "Remove selected host" msgstr "Изтриване на избрания адрес" #: standalone/scannerdrake:683 standalone/scannerdrake:691 #: standalone/scannerdrake:696 standalone/scannerdrake:742 #: standalone/scannerdrake:833 standalone/scannerdrake:841 #: standalone/scannerdrake:846 standalone/scannerdrake:892 #, c-format msgid "Name/IP address of host:" msgstr "" #: standalone/scannerdrake:705 standalone/scannerdrake:855 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "" #: standalone/scannerdrake:716 standalone/scannerdrake:866 #, c-format msgid "You must enter a host name or an IP address.\n" msgstr "Трябва да въведете име или IP адрес.\n" #: standalone/scannerdrake:727 standalone/scannerdrake:877 #, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "" #: standalone/scannerdrake:782 #, c-format msgid "Usage of remote scanners" msgstr "Използване на отдалечени скенери" #: standalone/scannerdrake:783 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "" #: standalone/scannerdrake:940 #, fuzzy, c-format msgid "" "saned needs to be installed to share the local scanner(s).\n" "\n" "Do you want to install the saned package?" msgstr "" "Пакет %s трябва да бъде инсталиран\n" "Искате да го инсталирате?" #: standalone/scannerdrake:944 standalone/scannerdrake:948 #, c-format msgid "Your scanner(s) will not be available on the network." msgstr "" #: standalone/service_harddrake:105 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "" #: standalone/service_harddrake:106 #, c-format msgid "- %s was removed\n" msgstr "" #: standalone/service_harddrake:109 #, fuzzy, c-format msgid "Some devices were added: %s\n" msgstr "Устройство на мишката: %s\n" #: standalone/service_harddrake:110 #, c-format msgid "- %s was added\n" msgstr "" #: standalone/service_harddrake:206 #, c-format msgid "Hardware probing in progress" msgstr "Прогрес на хардуерна проба" #: standalone/service_harddrake_confirm:7 #, c-format msgid "Hardware changes in \"%s\" class (%s seconds to answer)" msgstr "" #: standalone/service_harddrake_confirm:8 #, fuzzy, c-format msgid "Do you want to run the appropriate config tool?" msgstr "Искате ли да тествате настройките?" #: steps.pm:14 #, c-format msgid "Language" msgstr "Избор на език" #: steps.pm:15 #, c-format msgid "License" msgstr "Лиценз" #: steps.pm:16 #, c-format msgid "Configure mouse" msgstr "Настройка на мишка" #: steps.pm:17 #, c-format msgid "Hard drive detection" msgstr "Засичане на дисковете" #: steps.pm:18 #, c-format msgid "Select installation class" msgstr "Избор на клас инсталация" #: steps.pm:19 #, c-format msgid "Choose your keyboard" msgstr "Избор на клавиатура" #: steps.pm:21 #, c-format msgid "Partitioning" msgstr "Разделяне на дялове" #: steps.pm:22 #, c-format msgid "Format partitions" msgstr "Форматиране на дялове" #: steps.pm:23 #, c-format msgid "Choose packages to install" msgstr "Пакети за инсталиране" #: steps.pm:24 #, c-format msgid "Install system" msgstr "Инсталиране на системата" #: steps.pm:25 #, fuzzy, c-format msgid "Administrator password" msgstr "Въведете парола за root" #: steps.pm:26 #, c-format msgid "Add a user" msgstr "Добавяне на потребител" #: steps.pm:27 #, c-format msgid "Configure networking" msgstr "Настойка на мрежата" #: steps.pm:28 #, c-format msgid "Install bootloader" msgstr "Инсталиране на bootloader" #: steps.pm:29 #, c-format msgid "Configure X" msgstr "Настройка на Х" #: steps.pm:31 #, c-format msgid "Configure services" msgstr "Настройка на услугите" #: steps.pm:32 #, c-format msgid "Install updates" msgstr "Инсталиране на обновления" #: steps.pm:33 #, c-format msgid "Exit install" msgstr "Изход от инсталационната програма" #: ugtk2.pm:899 #, c-format msgid "Is this correct?" msgstr "Всичко правилно ли е ?" #: ugtk2.pm:959 #, fuzzy, c-format msgid "No file chosen" msgstr "избор на файл" #: ugtk2.pm:961 #, fuzzy, c-format msgid "You have chosen a file, not a directory" msgstr "Трябва да изберете файл, а не директория.\n" #: ugtk2.pm:963 #, fuzzy, c-format msgid "You have chosen a directory, not a file" msgstr "Името \"/\" може да е само папка, а не ключ" #: ugtk2.pm:965 #, fuzzy, c-format msgid "No such directory" msgstr "Не е директория" #: ugtk2.pm:965 #, fuzzy, c-format msgid "No such file" msgstr "Не съществува файл \"%s\"\n" #: ugtk2.pm:1046 #, c-format msgid "Expand Tree" msgstr "Разшири дървото" #: ugtk2.pm:1047 #, c-format msgid "Collapse Tree" msgstr "Изчисти дървото" #: ugtk2.pm:1048 #, c-format msgid "Toggle between flat and group sorted" msgstr "Превключване между нормално и сортиране по групи" #: wizards.pm:95 #, c-format msgid "" "%s is not installed\n" "Click \"Next\" to install or \"Cancel\" to quit" msgstr "" "%s не е инсталирано\n" "Натиснете \"Нататък\",за да инсталирате или \"Отказ\" за изход" #: wizards.pm:99 #, c-format msgid "Installation failed" msgstr "Инсталацията провалена" #~ msgid "http://www.mandrivalinux.com/en/errata.php3" #~ msgstr "http://www.mandrivalinux.com/en/errata.php3" #, fuzzy #~ msgid "" #~ "_: keyboard\n" #~ "Dvorak (Esperanto)" #~ msgstr "Дворак (Норвежка)" #~ msgid "" #~ "_: keyboard\n" #~ "Lithuanian AZERTY (old)" #~ msgstr "Литвийска AZERTY (стара)" #~ msgid "" #~ "_: keyboard\n" #~ "Lithuanian \"phonetic\" QWERTY" #~ msgstr "Литвийска \"фонетичен\" QWERTY" #, fuzzy #~ msgid "Default Idmap " #~ msgstr "Подразбиращо се работно място" #~ msgid "Please wait, preparing installation..." #~ msgstr "Моля, изчакайте, подготвяне на инсталацията" #~ msgid "Installing package %s" #~ msgstr "Инсталиране на пакета %s" #~ msgid "Welcome to Mandriva Linux!" #~ msgstr "Добре дошли в Mandriva Linux!" #, fuzzy #~ msgid "Open Source" #~ msgstr "Сървъри" #, fuzzy #~ msgid "Welcome to the world of open source!" #~ msgstr "Добре дошли в света на Отвореният Изходен код" #, fuzzy #~ msgid "Mandriva Products" #~ msgstr "Контролен център на Mandriva Linux" #, fuzzy #~ msgid "Choose your Favorite Desktop Environment" #~ msgstr "Избор на криптиращ ключ за еашата файлова система" #, fuzzy #~ msgid "Kontact" #~ msgstr "Мандрива Клуб" #~ msgid "Surf the Internet" #~ msgstr "Работа в Интернет" #, fuzzy #~ msgid "\t* Transfer files with KBear." #~ msgstr "Пренос на файлове чрез FTP" #~ msgid "Development Environments" #~ msgstr "Среди за разработка" #, fuzzy #~ msgid "Development Editors" #~ msgstr "Разработка" #, fuzzy #~ msgid "Development Languages" #~ msgstr "Разработка" #~ msgid "\t\t* C++" #~ msgstr "\t\t* C++" #~ msgid "\t\t* Java™" #~ msgstr "\t\t* Java™" #, fuzzy #~ msgid "\t* Scripting languages:" #~ msgstr "Диспечер на печата " #~ msgid "\t\t* Perl" #~ msgstr "\t\t* Perl" #~ msgid "\t\t* Python" #~ msgstr "\t\t* Питон" #, fuzzy #~ msgid "Development Tools" #~ msgstr "Разработка" #, fuzzy #~ msgid "Groupware Server" #~ msgstr "Сървъри" #~ msgid "Servers" #~ msgstr "Сървъри" #, fuzzy #~ msgid "\t* Apache: The most widely used web server." #~ msgstr "Apache World Wide Web Сървър" #~ msgid "Mandriva Linux Control Center" #~ msgstr "Контролен център на Mandriva Linux" #, fuzzy #~ msgid "Online Store" #~ msgstr "Контролен център на Mandriva Linux" #~ msgid "Mandriva Club" #~ msgstr "Мандрива Клуб" #~ msgid "Mandriva Online" #~ msgstr "Mandriva Online" #~ msgid "Mandriva Expert" #~ msgstr "Мандрива Експерт" #~ msgid "Network:" #~ msgstr "Мрежа:" #~ msgid "IP:" #~ msgstr "Адрес:" #~ msgid "Mode:" #~ msgstr "Режим:" #~ msgid "Encryption:" #~ msgstr "Криптиране:" #~ msgid "Rescan" #~ msgstr "Претърсване" #~ msgid "Status" #~ msgstr "Състояние" #~ msgid "Disconnect" #~ msgstr "Разкачване" #~ msgid "" #~ "x coordinate of text box\n" #~ "in number of characters" #~ msgstr "" #~ "x координати на текстовата рамка\n" #~ "в брой символи" #~ msgid "" #~ "y coordinate of text box\n" #~ "in number of characters" #~ msgstr "" #~ "y координати на текстовата рамка\n" #~ "в брой символи" #~ msgid "text width" #~ msgstr "ширина на текст" #~ msgid "ProgressBar color selection" #~ msgstr "Избор на цвят за лентата на прогрес" #~ msgid "Connect to the Internet" #~ msgstr "Свържи се към Интернет" #~ msgid "" #~ "The most common way to connect with adsl is pppoe.\n" #~ "Some connections use PPTP, a few use DHCP.\n" #~ "If you do not know, choose 'use PPPoE'" #~ msgstr "" #~ "Най-честия начин за свързване чрез ADSL е PPPOE.\n" #~ "Някои връзки използват PPTP, а малко използват DHCP.\n" #~ "Ако не знаете, изберете 'използвай PPPOE'." #~ msgid "Do not print any test page" #~ msgstr "Не печати никаква тестова страница" #~ msgid "Printer on SMB/Windows 95/98/NT server" #~ msgstr "Принтер на SMB/Windows 95/98/NT сървър" #, fuzzy #~ msgid "Found printer on %s..." #~ msgstr "Изтриване на принтер \"%s\"..." #~ msgid "dhcpd Config..." #~ msgstr "Настройка на dhcpd..." #, fuzzy #~ msgid "Unable to select wireless network: %s" #~ msgstr "Не мога да се свръжа с огледален сървър' %s" #, fuzzy #~ msgid "Interactive intrusion detection" #~ msgstr "NetRanger - система за откриване на смущения" #, fuzzy #~ msgid "Active Firewall: intrusion detected" #~ msgstr "Открита е настройка на Защитна Стена !" #, fuzzy #~ msgid "Do you want to blacklist the attacker?" #~ msgstr "Искате ли да завършите играта?" #~ msgid "Grub" #~ msgstr "Grub" #~ msgid "Local Network adress" #~ msgstr "Адрес на Локална мрежа" #~ msgid "Configuring scripts, installing software, starting servers..." #~ msgstr "" #~ "Настройващи скриптове, инсталиране на софтуер, стартиране на сървъри..." #~ msgid "drakfloppy" #~ msgstr "drakfloppy" #~ msgid "Boot disk creation" #~ msgstr "Създаване на стартираща дискета" #~ msgid "General" #~ msgstr "Основно" #~ msgid "Kernel version" #~ msgstr "Версия на ядрото" #~ msgid "Preferences" #~ msgstr "Настройки" #~ msgid "Advanced preferences" #~ msgstr "Допълнителни опции" #~ msgid "Size" #~ msgstr "Големина" #, fuzzy #~ msgid "Mkinitrd optional arguments" #~ msgstr "mkinitrd допълнителни аргументи" #~ msgid "force" #~ msgstr "принудително" #~ msgid "omit raid modules" #~ msgstr "без raid модули" #~ msgid "if needed" #~ msgstr "ако е нужно" #~ msgid "omit scsi modules" #~ msgstr "без scsi модули" #~ msgid "Add a module" #~ msgstr "Добави модула" #~ msgid "Remove a module" #~ msgstr "Премахни модула" #~ msgid "Be sure a media is present for the device %s" #~ msgstr "Проверете имате ли дискета в устройството %s" #~ msgid "" #~ "There is no medium or it is write-protected for device %s.\n" #~ "Please insert one." #~ msgstr "" #~ "Няма носител в устойството или е защитена от писане %s.\n" #~ "Моля поставете един." #~ msgid "Unable to fork: %s" #~ msgstr "Не мога да направя 'fork': %s" #~ msgid "Floppy creation completed" #~ msgstr "Създаването на дискета приключи" #, fuzzy #~ msgid "" #~ "Unable to properly close mkbootdisk:\n" #~ "\n" #~ "%s" #~ msgstr "" #~ "Неможе да се затвори правилно mkbootdisk: \n" #~ " %s \n" #~ " %s" #~ msgid "You can not use a LVM Logical Volume for mount point %s" #~ msgstr "Не можете да използвате LVM тип за място на монтиране %s" #, fuzzy #~ msgid "" #~ "You've selected a LVM Logical Volume as root (/).\n" #~ "The bootloader is not able to handle this without a /boot partition.\n" #~ "Please be sure to add a /boot partition" #~ msgstr "" #~ "Маркирали сте софтуерен RAID дял като root (/).\n" #~ "Няма зареждаща програма, която да може да се справи с него без /boot " #~ "дял.\n" #~ "Така че добавете /boot дял" #~ msgid "use PPPoE" #~ msgstr "използвай PPPOE" #~ msgid "use PPTP" #~ msgstr "използвай PPPTP" #~ msgid "use DHCP" #~ msgstr "използвай DHCP" #, fuzzy #~ msgid "Alcatel Speedtouch USB" #~ msgstr "Alcatel speedtouch USB" #, fuzzy #~ msgid " - detected" #~ msgstr "засечена " #~ msgid "Sagem (using PPPoA) USB" #~ msgstr "Sagem (използва PPPoA) USB" #~ msgid "Sagem (using DHCP) USB" #~ msgstr "Sagem (използва DHCP) USB" #~ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" #~ msgstr "Icewm, Window Maker, Enlightenment, Fvwm и т.н." #~ msgid "PXE Server Configuration" #~ msgstr "Конфигуриране на PXE сървър" #~ msgid "Installation Server Configuration" #~ msgstr "Конфигуриране на Инсталационен Сървър" #, fuzzy #~ msgid "" #~ "You are about to configure your computer to install a PXE server as a " #~ "DHCP server\n" #~ "and a TFTP server to build an installation server.\n" #~ "With that feature, other computers on your local network will be " #~ "installable using this computer as source.\n" #~ "\n" #~ "Make sure you have configured your Network/Internet access using " #~ "drakconnect before going any further.\n" #~ "\n" #~ "Note: you need a dedicated Network Adapter to set up a Local Area Network " #~ "(LAN)." #~ msgstr "" #~ "На път сте да настроите компютъра си така, че да поделя Интернет " #~ "връзката\n" #~ "си. С тази възможност, други компютри в локалната ви мрежа ще могат да\n" #~ "използват Интернет връзката на този компютър.\n" #~ "\n" #~ "Отбележете: трябва ви отделен за това мрежов адаптер, за да установите " #~ "вътрешната си мрежа (LAN)." #~ msgid "No network adapter on your system!" #~ msgstr "Нямате мрежов адаптер!" #~ msgid "Choose the network interface" #~ msgstr "Изберете мрежов интерфейс" #~ msgid "" #~ "Please choose which network interface will be used for the dhcp server." #~ msgstr "" #~ "Моля, изберете кой мрежов адаптер да използвам за връзка към dhcp сървър." #~ msgid "Interface %s (on network %s)" #~ msgstr "Интерфейс %s (на мрежа %s)" #~ msgid "Installation image directory" #~ msgstr "Директория с образа на инсталацията" #~ msgid "No image found" #~ msgstr "Не е намерен образ" #~ msgid "Location of auto_install.cfg file" #~ msgstr "Местоположение на auto_install.cfg файл" #~ msgid "Internet Connection Sharing currently disabled" #~ msgstr "Споделянето на Интернет връзката е изключено." #~ msgid "Enabling servers..." #~ msgstr "Включване на сървъри ..." #~ msgid "Internet Connection Sharing currently enabled" #~ msgstr "Споделянето на връзката към Интернет е вече активирано" #~ msgid "Interface %s (using module %s)" #~ msgstr "Интерфейс %s (използващ модул %s)" #~ msgid "Interface %s" #~ msgstr "Интерфейс %s" #~ msgid "Network interface already configured" #~ msgstr "Мрежовият интерфейс вече е конфигуриран" #~ msgid "Show current interface configuration" #~ msgstr "Показва конфигурация на текущият интерфейс" #~ msgid "Current interface configuration" #~ msgstr "Конфигурация на текущият интерфейс" #~ msgid "(This) DHCP Server IP" #~ msgstr "(Този) DHCP сървър IP" #, fuzzy #~ msgid "" #~ "WARNING: this device has been previously configured to connect to the " #~ "Internet.\n" #~ "Modifying the fields below will override this configuration.\n" #~ "Do you really want to reconfigure this device?" #~ msgstr "" #~ "ВНИМАНИЕ: Това устройство вече е настроено да се свързва към Интернет.\n" #~ "Просто приемете, за да оставите устройството настроено.\n" #~ "Поправката на полетата по-долу ще презапише тази настройка." #~ msgid "Dynamic IP Address Pool:" #~ msgstr "Пул с динамичен IP адрес:" #, fuzzy #~ msgid "hd" #~ msgstr "Чад" #, fuzzy #~ msgid "tape" #~ msgstr "Лента" #~ msgid "" #~ "Maximum size\n" #~ " allowed for Drakbackup (MB)" #~ msgstr "" #~ "Моля, въведете максималният размер\n" #~ " позволен за Drakbackup (в МБ)" #~ msgid "first step creation" #~ msgstr "първа стъпка на създаване" #~ msgid "choose image file" #~ msgstr "изберете изображение" #~ msgid "Configure bootsplash picture" #~ msgstr "Настройка на картинката при зареждане" #~ msgid "the color of the progress bar" #~ msgstr "цветът на лентата за прогрес" #~ msgid "Preview" #~ msgstr "Преглед" #~ msgid "Choose color" #~ msgstr "Изберор на цвят" #~ msgid "Notice" #~ msgstr "Бележка" #~ msgid "You must choose an image file first!" #~ msgstr "Вие трябва да изберете първо графичен файл!" #~ msgid "Generating preview..." #~ msgstr "Генерирам преглед..." #~ msgid "No floppy drive available" #~ msgstr "Няма флопи устройство" #~ msgid "Please insert the Update Modules floppy in drive %s" #~ msgstr "Сложете дискета за обновяване на модули в устройство %s" #, fuzzy #~ msgid "" #~ "_: keyboard\n" #~ "Tifinagh (+latin/arabic)" #~ msgstr "Югославска (латиница)" #~ msgid "No network card" #~ msgstr "Няма открита мрежова карта" #~ msgid "You've not selected any font" #~ msgstr "Не сте избрали никакъв шрифт" #~ msgid "No browser available! Please install one" #~ msgstr "Няма налична програма за преглед! Моля изберете една" #~ msgid "" #~ "No browser is installed on your system, Please install one if you want to " #~ "browse the help system" #~ msgstr "" #~ "Нямате инсталиран браузър, инсталирайте поне един, за да разглеждате " #~ "помощната система" #~ msgid "Checking device and configuring HPOJ..." #~ msgstr "Проверка на устройство и конфигурация за HPOJ..." #~ msgid "" #~ "Insert a floppy in drive\n" #~ "All data on this floppy will be lost" #~ msgstr "" #~ "Сложете дискета във флопито\n" #~ "Всички данни, намиращи се върху дискетата, ще бъдат загубени" #~ msgid "Insert a FAT formatted floppy in drive %s" #~ msgstr "Сложете FAT форматирана дискета в устройство %s" #~ msgid "This floppy is not FAT formatted" #~ msgstr "Тази дискета не е форматирана на FAT" #~ msgid "" #~ "To use this saved packages selection, boot installation with ``linux " #~ "defcfg=floppy''" #~ msgstr "" #~ "За да използвате запазен избор на пакети, стартирайте инсталацията с " #~ "``linux defcfg=floppy''" #~ msgid "Load/Save on floppy" #~ msgstr "Зареди/Запази на дискета" #~ msgid "" #~ "Please choose load or save package selection on floppy.\n" #~ "The format is the same as auto_install generated floppies." #~ msgstr "" #~ "Може изберете зареждане или запис на избора на пакети на флопи.\n" #~ "Форматът е същият като auto_install генерираните дискети." #~ msgid "Load from floppy" #~ msgstr "Зареди от дискета" #~ msgid "Save on floppy" #~ msgstr "Запази на дискета" #~ msgid "Package selection" #~ msgstr "Избор на пакети" #~ msgid "Loading from floppy" #~ msgstr "Зареждане от дискета" #~ msgid "Insert a floppy containing package selection" #~ msgstr "Сложете дискета съдържаща избор на пакети" #~ msgid "multi-function device on parallel port #%s" #~ msgstr "многофункционално устройство на на паралелен порт #%s" #~ msgid "multi-function device on a parallel port" #~ msgstr "многофункционално устройство на паралелен порт" #~ msgid "multi-function device on USB" #~ msgstr "многофункционално устройство на USB" #~ msgid "multi-function device on HP JetDirect" #~ msgstr "многофункционално устройство на HP JetDirect" #~ msgid "multi-function device" #~ msgstr "многофункционално устройство" #~ msgid "printing to %s" #~ msgstr "печат на %s" #~ msgid "using command %s" #~ msgstr "използва команда %s" #~ msgid "Installing HPOJ package..." #~ msgstr "Инсталиране на HPOJ пакети ..." #~ msgid "Application:" #~ msgstr "Приложение:" #~ msgid "Release: " #~ msgstr "Версия:" #, fuzzy #~ msgid "Summary: " #~ msgstr "Обобщение" #, fuzzy #~ msgid "Submit kernel version" #~ msgstr "Версия на ядрото" #, fuzzy #~ msgid "connecting to %s..." #~ msgstr "Изпълнява \"%s\" ..." #, fuzzy #~ msgid "Please enter a package name." #~ msgstr "Моля, задайте потребителско име" #, fuzzy #~ msgid "Please enter summary text." #~ msgstr "Моля, въведете вашият логин" #~ msgid "Loading printer configuration... Please wait" #~ msgstr "Зареждане на настройката на принтера... Моля изчакайте" #, fuzzy #~ msgid "The " #~ msgstr "Теми" #, fuzzy #~ msgid "%s (was %s)" #~ msgstr "%s (Порт %s)" #~ msgid "Root password" #~ msgstr "Въведете парола за root" #, fuzzy #~ msgid "Do you want to recover your system?" #~ msgstr "Искате ли да използвате aboot ?" #~ msgid "Move" #~ msgstr "Премести" #~ msgid "Which disk do you want to move it to?" #~ msgstr "На кой диск искате да го преместите ?" #~ msgid "Sector" #~ msgstr "Сектор" #~ msgid "Which sector do you want to move it to?" #~ msgstr "На кой сектор искате да го преместите?" #~ msgid "Moving" #~ msgstr "Местене" #~ msgid "Moving partition..." #~ msgstr "Мествя дяла ... " #~ msgid "Error opening %s for writing: %s" #~ msgstr "Грешка при отваряне на %s за запис: %s" #~ msgid "" #~ "This is HardDrake, a Mandriva Linux hardware configuration tool.\n" #~ "Version: %s\n" #~ "Author: Thierry Vignaud <" #~ "tvignaud@mandriva.com>\n" #~ "\n" #~ msgstr "" #~ "Това е HardDrake, хардуерен конфигурационен инструмент на Mandriva " #~ "Linux.\n" #~ "Версия: %s\n" #~ "Автор: Thierry Vignaud <" #~ "tvignaud@mandriva.com>\n" #~ "\n" #, fuzzy #~ msgid "Morrocco" #~ msgstr "Мароко" #, fuzzy #~ msgid "Server Information:" #~ msgstr "Информация" #, fuzzy #~ msgid "Use SSL connection" #~ msgstr "ADSL връзка" #, fuzzy #~ msgid "User Base:" #~ msgstr "Потребителско име" #, fuzzy #~ msgid "Base:" #~ msgstr "Име:" #, fuzzy #~ msgid "Scope:" #~ msgstr "Стоп" #, fuzzy #~ msgid "Bind Server:" #~ msgstr "Сървър: " #~ msgid "OK" #~ msgstr "OK" #, fuzzy #~ msgid "NO" #~ msgstr "ИНФО" #~ msgid "Czech (QWERTZ)" #~ msgstr "Чешка (QWERTZ)" #~ msgid "German" #~ msgstr "Немска" #~ msgid "Dvorak" #~ msgstr "Дворак" #~ msgid "Spanish" #~ msgstr "Испанска" #~ msgid "Finnish" #~ msgstr "Финландска" #~ msgid "French" #~ msgstr "Френска" #~ msgid "Norwegian" #~ msgstr "Норвежка" #~ msgid "Polish" #~ msgstr "Полска" #~ msgid "Russian" #~ msgstr "Руска" #~ msgid "Swedish" #~ msgstr "Шведска" #~ msgid "Albanian" #~ msgstr "Албанска" #~ msgid "Armenian (old)" #~ msgstr "Арменска (стара)" #~ msgid "Armenian (typewriter)" #~ msgstr "Арменска (пишеща машина)" #~ msgid "Armenian (phonetic)" #~ msgstr "Арменска (фонетичен)" #~ msgid "Arabic" #~ msgstr "Арабски" #~ msgid "Azerbaidjani (latin)" #~ msgstr "Азербайджанска (латиница)" #~ msgid "Belgian" #~ msgstr "Белгийска" #~ msgid "Bengali" #~ msgstr "Бенгалска" #~ msgid "Bulgarian (phonetic)" #~ msgstr "Българска (фонетичен)" #~ msgid "Bulgarian (BDS)" #~ msgstr "Българска (BDS)" #~ msgid "Brazilian (ABNT-2)" #~ msgstr "Бразилска (ABNT-2)" #~ msgid "Bosnian" #~ msgstr "Босненска" #~ msgid "Belarusian" #~ msgstr "Беларуска" #~ msgid "Swiss (German layout)" #~ msgstr "Швейцарска (немска наредба)" #~ msgid "Swiss (French layout)" #~ msgstr "Швейцарска (френски наредба)" #~ msgid "Czech (QWERTY)" #~ msgstr "Чешка (QWERTY)" #~ msgid "German (no dead keys)" #~ msgstr "Немска (без неработещи клавиши)" #~ msgid "Devanagari" #~ msgstr "Давенаджари" #~ msgid "Danish" #~ msgstr "Датска" #~ msgid "Dvorak (US)" #~ msgstr "Дворак (US)" #, fuzzy #~ msgid "Dvorak (Esperanto)" #~ msgstr "Дворак (Норвежка)" #~ msgid "Dvorak (Norwegian)" #~ msgstr "Дворак (Норвежка)" #~ msgid "Dvorak (Swedish)" #~ msgstr "Дворак (Шведска)" #~ msgid "Estonian" #~ msgstr "Естонска" #~ msgid "Georgian (\"Russian\" layout)" #~ msgstr "Грузинска (\"Руска\" наредба)" #~ msgid "Georgian (\"Latin\" layout)" #~ msgstr "Грузинска (\"Латинска\" наредба)" #~ msgid "Greek" #~ msgstr "Гръцка" #~ msgid "Gujarati" #~ msgstr "Гуаджарати" #~ msgid "Gurmukhi" #~ msgstr "Гурмукчи" #~ msgid "Hungarian" #~ msgstr "Унгарска" #~ msgid "Croatian" #~ msgstr "Хърватска" #~ msgid "Israeli" #~ msgstr "Израелска" #~ msgid "Israeli (Phonetic)" #~ msgstr "Израелска (фонетична)" #~ msgid "Iranian" #~ msgstr "Иранска" #~ msgid "Icelandic" #~ msgstr "Исландска" #~ msgid "Italian" #~ msgstr "Италианска" #~ msgid "Inuktitut" #~ msgstr "Инуктитут" #~ msgid "Japanese 106 keys" #~ msgstr "Японска 106 клавиша" #~ msgid "Kannada" #~ msgstr "Канада" #~ msgid "Korean keyboard" #~ msgstr "Корейска клавиатура" #, fuzzy #~ msgid "Kyrgyz keyboard" #~ msgstr "UK клавиатура" #~ msgid "Latin American" #~ msgstr "Латиноамериканска" #~ msgid "Laotian" #~ msgstr "Лаоска" #~ msgid "Lithuanian AZERTY (old)" #~ msgstr "Литвийска AZERTY (стара)" #~ msgid "Lithuanian AZERTY (new)" #~ msgstr "Литвийска AZERTY (нова)" #~ msgid "Lithuanian \"number row\" QWERTY" #~ msgstr "Литвийска \"числова редица\" QWERTY" #~ msgid "Lithuanian \"phonetic\" QWERTY" #~ msgstr "Литвийска \"фонетичен\" QWERTY" #~ msgid "Latvian" #~ msgstr "Латвийска" #~ msgid "Malayalam" #~ msgstr "Малайлам" #~ msgid "Macedonian" #~ msgstr "Македонска" #~ msgid "Myanmar (Burmese)" #~ msgstr "Майнмар (бирманска)" #~ msgid "Mongolian (cyrillic)" #~ msgstr "Монголска (кирилица)" #~ msgid "Maltese (UK)" #~ msgstr "Малтийска (UK)" #~ msgid "Maltese (US)" #~ msgstr "Малтийска (US)" #~ msgid "Dutch" #~ msgstr "Холандска" #~ msgid "Oriya" #~ msgstr "Орийска" #~ msgid "Polish (qwerty layout)" #~ msgstr "Полска (QWERTY наредба)" #~ msgid "Polish (qwertz layout)" #~ msgstr "Полска (QWERTZ наредба)" #~ msgid "Portuguese" #~ msgstr "Португалска" #~ msgid "Canadian (Quebec)" #~ msgstr "Канадска (Квебек)" #~ msgid "Romanian (qwertz)" #~ msgstr "Румънска (qwertz)" #~ msgid "Romanian (qwerty)" #~ msgstr "Румънска (qwerty)" #~ msgid "Russian (Phonetic)" #~ msgstr "Руска (фонетична)" #~ msgid "Saami (norwegian)" #~ msgstr "Саами (норвежка)" #, fuzzy #~ msgid "Saami (swedish/finnish)" #~ msgstr "Саами (норвежка)" #~ msgid "Slovenian" #~ msgstr "Словенска" #~ msgid "Slovakian (QWERTZ)" #~ msgstr "Словашка (QWERTZ)" #~ msgid "Slovakian (QWERTY)" #~ msgstr "Словашка (QWERTY)" #~ msgid "Serbian (cyrillic)" #~ msgstr "Сръбска (кирилица)" #~ msgid "Syriac" #~ msgstr "Сирийски" #~ msgid "Syriac (phonetic)" #~ msgstr "Сирийски (фонетичен)" #~ msgid "Telugu" #~ msgstr "Телугу" #~ msgid "Tamil (ISCII-layout)" #~ msgstr "Тамилска (ISCII-подредба)" #~ msgid "Tamil (Typewriter-layout)" #~ msgstr "Тамилска (пишеща машина)" #~ msgid "Thai keyboard" #~ msgstr "Тайванска клавиатура" #~ msgid "Tajik keyboard" #~ msgstr "Таджикистанска клавиатура" #~ msgid "Turkish (traditional \"F\" model)" #~ msgstr "Турска (традиционен \"F\" модел)" #~ msgid "Turkish (modern \"Q\" model)" #~ msgstr "Турска (модерен \"Q\" модел)" #~ msgid "Ukrainian" #~ msgstr "Украинска" #~ msgid "Uzbek (cyrillic)" #~ msgstr "Узбекистанска (кирилица)" #~ msgid "Vietnamese \"numeric row\" QWERTY" #~ msgstr "Виетнамска \"числова редица\" QWERTY" #~ msgid "Yugoslavian (latin)" #~ msgstr "Югославска (латиница)" #, fuzzy #~ msgid "No devices found" #~ msgstr "Не е намерен образ" #, fuzzy #~ msgid "" #~ "Welcome to the UPS configuration utility.\n" #~ "\n" #~ "Here, you'll be add a new UPS to your system.\n" #~ msgstr "" #~ "Добре дошли в настройката на е-поща.\n" #~ "\n" #~ "Тук можете да укажете предопитанията си за известяващата система.\n" #~ msgid "Enable multiple profiles" #~ msgstr "Включва много профили" #~ msgid "Installing bootloader" #~ msgstr "Инсталиране на bootloader" #~ msgid "" #~ "You may now provide options to module %s.\n" #~ "Options are in format ``name=value name2=value2...''.\n" #~ "For instance, ``io=0x300 irq=7''" #~ msgstr "" #~ "Сега можете да подадете опциите му до модула %s.\n" #~ "Опциите са във формат ``име=стойност име2=стойност2 ...''.\n" #~ "Например: ``io=0x300 irq=7''" #~ msgid "Configuring printer..." #~ msgstr "Настройка на принтера ..." #~ msgid "Configuring applications..." #~ msgstr "Настройка на приложения..." #~ msgid "Add this printer to Star Office/OpenOffice.org/GIMP" #~ msgstr "Добавя този принтер на Star Office/OpenOffice.org/GIMP" #~ msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" #~ msgstr "Премахва този принтер от Star Office/OpenOffice.org/GIMP" #~ msgid "Adding printer to Star Office/OpenOffice.org/GIMP" #~ msgstr "Добавяне на принтер на Star Office/OpenOffice.org/GIMP" #~ msgid "" #~ "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/" #~ "GIMP." #~ msgstr "" #~ "Принтерът \"%s\" е бил успешно добавен към Star Office/OpenOffice.org/" #~ "GIMP." #~ msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." #~ msgstr "" #~ "Неуспех при добавяне на принтер \"%s\" на Star Office/OpenOffice.org/GIMP." #~ msgid "Removing printer from Star Office/OpenOffice.org/GIMP" #~ msgstr "Премахвам принтер от Star Office/OpenOffice.org/GIMP" #~ msgid "" #~ "The printer \"%s\" was successfully removed from Star Office/OpenOffice." #~ "org/GIMP." #~ msgstr "" #~ "Принтерът \"%s\" беше успешно премахнат от ffice/OpenOffice.org/GIMP." #~ msgid "" #~ "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." #~ msgstr "" #~ "Неспешно премахване на принтер \"%s\" от Star Office/OpenOffice.org/GIMP." #~ msgid "Installation of %s failed. The following error occurred:" #~ msgstr "Инсталацията на %s провалена. Появи се следната грешка:" #~ msgid "Set of tools to read and send mail and news and to browse the Web" #~ msgstr "" #~ "Набор от инструменти за четене и изпращане на поща и новини и за " #~ "сърфиране из Мрежата" #~ msgid "Use auto detection" #~ msgstr "Използвай автоматично засичане" #~ msgid "" #~ "This dialog is used to choose which services you wish to start at boot\n" #~ "time.\n" #~ "\n" #~ "DrakX will list all the services available on the current installation.\n" #~ "Review each one carefully and uncheck those which are not needed at boot\n" #~ "time.\n" #~ "\n" #~ "A short explanatory text will be displayed about a service when it is\n" #~ "selected. However, if you are not sure whether a service is useful or " #~ "not,\n" #~ "it is safer to leave the default behavior.\n" #~ "\n" #~ "!! At this stage, be very careful if you intend to use your machine as a\n" #~ "server: you will probably not want to start any services that you do not\n" #~ "need. Please remember that several services can be dangerous if they are\n" #~ "enabled on a server. In general, select only the services you really " #~ "need.\n" #~ "!!" #~ msgstr "" #~ "Сега можете да изберете кои услуги да се пускат при стартиране.\n" #~ "\n" #~ "Тук са представени всички услуги, достъпни с настоящата инсталация.\n" #~ "Прегледайте ги внимателно и изключете тези, които не ви трябват винаги " #~ "при стартиране.\n" #~ "\n" #~ "Можете да видите кратък обяснителен текст за услугата, като поставите " #~ "курора на мишката си\n" #~ "над името на услугата. Ако не сте сигурни, дали услугата е полезна или " #~ "не, по-добре\n" #~ "е да оставите избора по подразбиране.\n" #~ "\n" #~ "Внимавайте с тази стъпка, ако смятате да използвате машината си като " #~ "сървър:\n" #~ "сигурно не бихте искали да пускате услуги, от които не се нуждаете. " #~ "Моля,\n" #~ "запомнете, че някои услуги могат да бъдат опасни, ако са включени на " #~ "сървъра.\n" #~ "По принцип, избирайте само услугите, от които наистина се нуждаете.\n" #~ "!!" #~ msgid "GRUB" #~ msgstr "GRUB" #~ msgid "/dev/hda" #~ msgstr "/dev/hda" #~ msgid "/dev/hdb" #~ msgstr "/dev/hdb" #~ msgid "/dev/fd0" #~ msgstr "/dev/fd0" #~ msgid "Delay before booting the default image" #~ msgstr "Забавяне преди стартирането на подразбиращият се образ" #~ msgid "" #~ "\"%s\": if a sound card is detected on your system, it is displayed " #~ "here.\n" #~ "If you notice the sound card displayed is not the one that is actually\n" #~ "present on your system, you can click on the button and choose another\n" #~ "driver." #~ msgstr "" #~ "\"%s\"ако намеря звукова карта,ще видите съобщение за това.\n" #~ "Ако забележите,че намерената звукова карта не отговаря на истината,\n" #~ "можете да цъкнете на бутона и да изберете друг драйвер." #~ msgid "" #~ "No ethernet network adapter has been detected on your system.\n" #~ "I cannot set up this connection type." #~ msgstr "" #~ "Не беше намерен мрежов адаптер в системата ви.\n" #~ "Не можете да настроите такъв вид връзка." #~ msgid "" #~ "Please choose which network adapter you want to use to connect to " #~ "Internet." #~ msgstr "" #~ "Моля, изберете кой мрежов адаптер да използвам за връзка към Интернет" #~ msgid "chunk size" #~ msgstr "големина на парчето" #~ msgid "Chunk size %s\n" #~ msgstr "Размер на парчето %s\n" #~ msgid "Can not add a partition to _formatted_ RAID md%d" #~ msgstr "Не мога да прибавя дял към _форматиран_ RAID md%d" #~ msgid "mkraid failed (maybe raidtools are missing?)" #~ msgstr "mkraid пропадна (може би raidtools липсват ?)" #~ msgid "mkraid failed" #~ msgstr "mkraid пропадна" #~ msgid "" #~ "Connection failed.\n" #~ "Verify your configuration in the Mandrake Control Center." #~ msgstr "" #~ "Връзката пропадна.\n" #~ "Проверете си конфигурацията в Контролен център на Mandriva Linux." #~ msgid "The package %s is needed. Install it?" #~ msgstr "Пакет %s е необходим. Да го инсталирам?" #~ msgid "ignore" #~ msgstr "игнориране" #~ msgid "no" #~ msgstr "не" #~ msgid "yes" #~ msgstr "да" #~ msgid "SILO Installation" #~ msgstr "SILO инсталация" #~ msgid "First sector of boot partition" #~ msgstr "Първи сектор от стартиращия се дял" #~ msgid "Bootloader installation" #~ msgstr "Инсталация на Bootloader" #~ msgid "SILO" #~ msgstr "SILO" #~ msgid "Alcatel speedtouch usb" #~ msgstr "Alcatel speedtouch USB" #~ msgid "Sagem (using pppoa) usb" #~ msgstr "Sagem (използва pppoa) usb" #~ msgid "Harddrake2 version %s" #~ msgstr "Harddrake2 версия %s" #~ msgid "transmitted" #~ msgstr "прехвърлени" #~ msgid "received" #~ msgstr "получени" #~ msgid "" #~ "You can export using NFS or SMB. Please select which you'd like to use." #~ msgstr "" #~ "Вие може да експортирате като използвате NFS или SMB. Моля, изберете " #~ "какво искате да използвате." #~ msgid "" #~ "You can export using NFS or Samba. Please select which you'd like to use." #~ msgstr "" #~ "Вие може да експортирате като използвате NFS или Samba. Моля, изберете " #~ "какво искате да използвате." #~ msgid "You must be root to read configuration file. \n" #~ msgstr "Трябва да сте root , за да прочетете файла с настройките.\n" #~ msgid "Can not open %s!" #~ msgstr "Не мога да отворя %s!" #~ msgid "" #~ "Your card can have 3D hardware acceleration support but only with Xorg %" #~ "s.\n" #~ "Your card is supported by Xorg %s which may have a better support in 2D." #~ msgstr "" #~ "Картата ви може да има поддръжка на хардуерно 3D ускорение, но само с " #~ "Xfree %s.\n" #~ "Картата ви се поддържа от Xorg %s, който може да има по-добра поддръжка " #~ "на 2D." #~ msgid "" #~ "Your card can have 3D hardware acceleration support but only with Xorg %" #~ "s,\n" #~ "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" #~ "Your card is supported by Xorg %s which may have a better support in 2D." #~ msgstr "" #~ "Картата ви може да има поддръжка на хардуерно 3D ускорение, но само с " #~ "Xorg %s,\n" #~ "ОТБЕЛЕЖЕТЕ, ЧЕ ТОВА Е ЕКСПЕРИМЕНТАЛНА ПОДДРЪЖКА И МОЖЕ ДА ЗАБИЕ КОМПЮТЪРА " #~ "ВИ.\n" #~ "Картата ви се поддържа от Xorg %s, който може да има по-добра поддръжка " #~ "на 2D." #~ msgid "Xpmac (installation display driver)" #~ msgstr "Xpmac (инсталация графичен драйвер)" #~ msgid "4 billion colors (32 bits)" #~ msgstr "4 милиарда цвята (32 бита)" #~ msgid "XFree86 server: %s\n" #~ msgstr "XFree86 сървър: %s\n" #~ msgid "Here is the full list of keyboards available" #~ msgstr "Ето пълен списък на достръпните клавиатури" #~ msgid "Please insert the Boot floppy used in drive %s" #~ msgstr "Сложете стартиращата дискета в устройство %s" #~ msgid "Provider dns 1 (optional)" #~ msgstr "1-ви DNS на доставчика (по желание)" #~ msgid "Provider dns 2 (optional)" #~ msgstr "2-ри DNS на доставчика (по желание)" #~ msgid "DHCP Client" #~ msgstr "DHCP клиент" #~ msgid "" #~ "Change\n" #~ "Restore Path" #~ msgstr "" #~ "Промяна\n" #~ "пътя на възстановяване" #~ msgid "European protocol" #~ msgstr "Европейски протокол" #~ msgid "Found \"%s\" interface do you want to use it ?" #~ msgstr "Намерен е \"%s\" интерфейс. Искате ли да го използвате?" #~ msgid "What kind is your ISDN connection?" #~ msgstr "Какъв е типът на ISDN връзката ?" #~ msgid "Do you want to start a new configuration ?" #~ msgstr "Желаете ли да започнете ново настройване?" #~ msgid "" #~ "I have detected an ISDN PCI card, but I do not know its type. Please " #~ "select a PCI card on the next screen." #~ msgstr "" #~ "Открита е ISDN PCI карта, но с непознат тип. Моля изберете някоя PCI " #~ "карта от следващият екран." #~ msgid "No ISDN PCI card found. Please select one on the next screen." #~ msgstr "Не е намерена ISDN PCI карта. Моля изберете от следващият екран." #~ msgid "DrakTermServ" #~ msgstr "ДракТермСърв" #~ msgid "Windows (FAT32)" #~ msgstr "Windows (FAT32)" #~ msgid "Scientific Workstation" #~ msgstr "Научна работна станция" #~ msgid "Please select media for backup..." #~ msgstr "Моля, изберете носител за възстановяване..." #~ msgid "Configuration of a remote printer" #~ msgstr "Настройка на отдалечен принтер" #~ msgid "Gnome Workstation" #~ msgstr "Gnome работна станция" #~ msgid "Running \"%s\" ..." #~ msgstr "Изпълнява \"%s\" ..." #~ msgid "utopia 25" #~ msgstr "utopia 25" #~ msgid "Messages" #~ msgstr "Съобщения" #~ msgid "Syslog" #~ msgstr "Системен журнал" #~ msgid "Compact" #~ msgstr "Компактен"