# SOME DESCRIPTIVE TITLE. # Copyright (C) 1999 Mandrakesoft. # Alexander Bokovoy , 2000 # Maryia Davidouskaia , 2000 msgid "" msgstr "" "Project-Id-Version: DrakX VERSION\n" "POT-Creation-Date: 2005-02-24 14:10+0100\n" "PO-Revision-Date: 2000-09-24 12:30 +0100\n" "Last-Translator: Alexander Bokovoy \n" "Language-Team: be\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../move/move.pm:292 #, fuzzy, c-format msgid "Which USB key do you want to format?" msgstr "Які тып пункта жадаеце дадаць?" #: ../move/move.pm:296 #, c-format msgid "" "You are about to format a USB device \"%s\". This will delete all data on " "it.\n" "Make sure that the selected device is the USB key you want to format. \n" "We advise you to unplug all other USB storage devices while doing this " "operation." msgstr "" #: ../move/move.pm:448 ../move/move.pm:460 #, c-format msgid "Key is not writable" msgstr "" #: ../move/move.pm:450 #, c-format msgid "" "The USB key seems to have write protection enabled. Please\n" "unplug it, remove write protection, and then plug it again." msgstr "" #: ../move/move.pm:452 #, c-format msgid "Retry" msgstr "Паўтарыць" #: ../move/move.pm:453 ../move/move.pm:497 #, c-format msgid "Continue without USB key" msgstr "" #: ../move/move.pm:462 #, c-format msgid "" "The USB key seems to have write protection enabled, but we can not safely\n" "unplug it now.\n" "\n" "\n" "Click the button to reboot the machine, unplug it, remove write protection,\n" "plug the key again, and launch Mandrake Move again." msgstr "" #: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1317 #, c-format msgid "Reboot" msgstr "Перазагрузка" #: ../move/move.pm:473 #, c-format msgid "" "Your USB key does not have any valid Windows (FAT) partitions.\n" "We need one to continue (beside, it's more standard so that you\n" "will be able to move and access your files from machines\n" "running Windows). Please plug in an USB key containing a\n" "Windows partition instead.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandrake Move as a normal live Mandrake\n" "Operating System." msgstr "" #: ../move/move.pm:483 #, c-format msgid "" "We did not detect any USB key on your system. If you\n" "plug in an USB key now, Mandrake Move will have the ability\n" "to transparently save the data in your home directory and\n" "system wide configuration, for next boot on this computer\n" "or another one. Note: if you plug in a key now, wait several\n" "seconds before detecting again.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandrake Move as a normal live Mandrake\n" "Operating System." msgstr "" #: ../move/move.pm:494 #, c-format msgid "Need a key to save your data" msgstr "" #: ../move/move.pm:496 #, c-format msgid "Detect USB key again" msgstr "" #: ../move/move.pm:517 #, c-format msgid "Setting up USB key" msgstr "" #: ../move/move.pm:517 #, fuzzy, c-format msgid "Please wait, setting up system configuration files on USB key..." msgstr "Канфігурацыя сыстэмы друку (прынтэры, заданьні, клясы, ...)" #: ../move/move.pm:546 #, c-format msgid "Enter your user information, password will be used for screensaver" msgstr "" #: ../move/move.pm:556 #, fuzzy, c-format msgid "Auto configuration" msgstr "Настройка IDE" #: ../move/move.pm:556 #, fuzzy, c-format msgid "Please wait, detecting and configuring devices..." msgstr "Канфігурацыя сыстэмы друку (прынтэры, заданьні, клясы, ...)" #: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664 #: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227 #: diskdrake/interactive.pm:240 diskdrake/interactive.pm:393 #: diskdrake/interactive.pm:411 diskdrake/interactive.pm:541 #: diskdrake/interactive.pm:546 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:183 #: install_any.pm:1564 install_any.pm:1587 install_steps.pm:82 #: install_steps_interactive.pm:38 interactive/http.pm:117 #: interactive/http.pm:118 network/netconnect.pm:1037 #: network/netconnect.pm:1041 network/netconnect.pm:1046 #: network/netconnect.pm:1072 network/netconnect.pm:1141 #: network/netconnect.pm:1145 network/netconnect.pm:1283 #: network/netconnect.pm:1288 network/netconnect.pm:1306 #: network/netconnect.pm:1491 printer/printerdrake.pm:238 #: printer/printerdrake.pm:245 printer/printerdrake.pm:270 #: printer/printerdrake.pm:416 printer/printerdrake.pm:421 #: printer/printerdrake.pm:434 printer/printerdrake.pm:444 #: printer/printerdrake.pm:508 printer/printerdrake.pm:635 #: printer/printerdrake.pm:1288 printer/printerdrake.pm:1335 #: printer/printerdrake.pm:1372 printer/printerdrake.pm:1416 #: printer/printerdrake.pm:1420 printer/printerdrake.pm:1434 #: printer/printerdrake.pm:1524 printer/printerdrake.pm:1605 #: printer/printerdrake.pm:1609 printer/printerdrake.pm:1613 #: printer/printerdrake.pm:1662 printer/printerdrake.pm:1719 #: printer/printerdrake.pm:1723 printer/printerdrake.pm:1737 #: printer/printerdrake.pm:1848 printer/printerdrake.pm:1852 #: printer/printerdrake.pm:1889 printer/printerdrake.pm:1957 #: printer/printerdrake.pm:1975 printer/printerdrake.pm:1984 #: printer/printerdrake.pm:1993 printer/printerdrake.pm:2004 #: printer/printerdrake.pm:2066 printer/printerdrake.pm:2159 #: printer/printerdrake.pm:2678 printer/printerdrake.pm:2949 #: printer/printerdrake.pm:2955 printer/printerdrake.pm:3501 #: printer/printerdrake.pm:3505 printer/printerdrake.pm:3509 #: printer/printerdrake.pm:3965 printer/printerdrake.pm:4205 #: printer/printerdrake.pm:4225 printer/printerdrake.pm:4301 #: printer/printerdrake.pm:4366 printer/printerdrake.pm:4483 #: standalone/drakTermServ:392 standalone/drakTermServ:753 #: standalone/drakTermServ:760 standalone/drakTermServ:779 #: standalone/drakTermServ:998 standalone/drakTermServ:1478 #: standalone/drakTermServ:1483 standalone/drakTermServ:1490 #: standalone/drakTermServ:1502 standalone/drakTermServ:1523 #: standalone/drakauth:35 standalone/drakbackup:511 standalone/drakbackup:625 #: standalone/drakbackup:1127 standalone/drakbackup:1160 #: standalone/drakbackup:1671 standalone/drakbackup:1827 #: standalone/drakbackup:2421 standalone/drakbackup:4110 #: standalone/drakbackup:4330 standalone/drakbug:191 standalone/drakclock:124 #: standalone/drakconnect:649 standalone/drakconnect:652 #: standalone/drakconnect:671 standalone/drakfloppy:297 #: standalone/drakfloppy:300 standalone/drakfloppy:306 standalone/drakfont:209 #: standalone/drakfont:222 standalone/drakfont:258 standalone/drakfont:604 #: standalone/draksplash:21 standalone/draksplash:501 standalone/drakxtv:107 #: standalone/finish-install:39 standalone/logdrake:169 #: standalone/logdrake:437 standalone/logdrake:442 standalone/scannerdrake:59 #: standalone/scannerdrake:202 standalone/scannerdrake:261 #: standalone/scannerdrake:715 standalone/scannerdrake:726 #: standalone/scannerdrake:865 standalone/scannerdrake:876 #: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121 #, c-format msgid "Error" msgstr "Памылка" #: ../move/move.pm:605 install_steps.pm:83 #, c-format msgid "" "An error occurred, but I do not know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "Узнікла памылка, якую не атрымліваецца карэктна апрацаваць,\n" "таму працягвайце на сваю рызыку." #: ../move/move.pm:660 install_steps_interactive.pm:38 #, c-format msgid "An error occurred" msgstr "Адбылася памылка" #: ../move/move.pm:666 #, c-format msgid "" "An error occurred:\n" "\n" "\n" "%s\n" "\n" "This may come from corrupted system configuration files\n" "on the USB key, in this case removing them and then\n" "rebooting Mandrake Move would fix the problem. To do\n" "so, click on the corresponding button.\n" "\n" "\n" "You may also want to reboot and remove the USB key, or\n" "examine its contents under another OS, or even have\n" "a look at log files in console #3 and #4 to try to\n" "guess what's happening." msgstr "" #: ../move/move.pm:681 #, fuzzy, c-format msgid "Remove system config files" msgstr "Прагледзіць файлы сыстэмных часопісаў" #: ../move/move.pm:682 #, c-format msgid "Simply reboot" msgstr "" #: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96 #, c-format msgid "You can only run with no CDROM support" msgstr "" #: ../move/tree/mdk_totem:71 #, fuzzy, c-format msgid "Kill those programs" msgstr "Выберыце праграму для выкананьня" #: ../move/tree/mdk_totem:72 #, c-format msgid "No CDROM support" msgstr "" #: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95 #: diskdrake/interactive.pm:1020 diskdrake/interactive.pm:1030 #: diskdrake/interactive.pm:1083 #, c-format msgid "Read carefully!" msgstr "Чытайце ўважліва!" #: ../move/tree/mdk_totem:77 #, c-format msgid "" "You can not use another CDROM when the following programs are running: \n" "%s" msgstr "" #: ../move/tree/mdk_totem:101 #, c-format msgid "Copying to memory to allow removing the CDROM" msgstr "" #: Xconfig/card.pm:13 #, c-format msgid "256 kB" msgstr "256 Кб" #: Xconfig/card.pm:14 #, c-format msgid "512 kB" msgstr "512 Кб" #: Xconfig/card.pm:15 #, c-format msgid "1 MB" msgstr "1 Мб" #: Xconfig/card.pm:16 #, c-format msgid "2 MB" msgstr "2 Мб" #: Xconfig/card.pm:17 #, c-format msgid "4 MB" msgstr "4 Мб" #: Xconfig/card.pm:18 #, c-format msgid "8 MB" msgstr "8 Мб" #: Xconfig/card.pm:19 #, c-format msgid "16 MB" msgstr "16 Мб" #: Xconfig/card.pm:20 #, c-format msgid "32 MB" msgstr "32 Мб" #: Xconfig/card.pm:21 #, c-format msgid "64 MB or more" msgstr "64 Мб ці болей" #: Xconfig/card.pm:159 #, c-format msgid "X server" msgstr "X сэервер" #: Xconfig/card.pm:160 #, fuzzy, c-format msgid "Choose an X server" msgstr "X сэервер" #: Xconfig/card.pm:192 #, fuzzy, c-format msgid "Multi-head configuration" msgstr "Канфігурацыя" #: Xconfig/card.pm:193 #, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" #: Xconfig/card.pm:262 #, fuzzy, c-format msgid "Can not install Xorg package: %s" msgstr "Усталяванне пакету %s" #: Xconfig/card.pm:272 #, c-format msgid "Select the memory size of your graphics card" msgstr "Пазначце памер відэапамяці" #: Xconfig/card.pm:349 #, c-format msgid "Xorg configuration" msgstr "Настройка Xorg" #: Xconfig/card.pm:351 #, c-format msgid "Which configuration of Xorg do you want to have?" msgstr "Якую канфігурацыю Xorg вы жадаеце атрымаць?" #: Xconfig/card.pm:384 #, fuzzy, c-format msgid "Configure all heads independently" msgstr "Настроіць панэль" #: Xconfig/card.pm:385 #, fuzzy, c-format msgid "Use Xinerama extension" msgstr "Пашырэнне файла" #: Xconfig/card.pm:390 #, fuzzy, c-format msgid "Configure only card \"%s\"%s" msgstr "Наладка вашага сэансу" #: Xconfig/card.pm:402 Xconfig/various.pm:23 #, c-format msgid "Xorg %s" msgstr "Сервер XFree86 %s" #: Xconfig/card.pm:409 Xconfig/various.pm:22 #, c-format msgid "Xorg %s with 3D hardware acceleration" msgstr "Xorg %s з падтрымкай 3D-паскарэння" #: Xconfig/card.pm:411 #, c-format msgid "Your card can have 3D hardware acceleration support with Xorg %s." msgstr "" "Ваша відэакарта можа мець 3D-паскарэнне, якое падтрымліваецца толькі Xorg %s." #: Xconfig/card.pm:417 #, c-format msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration" msgstr "Xorg %s з эксперыментальнай падтрымкай 3D-паскарэння" #: Xconfig/card.pm:419 #, c-format msgid "" "Your card can have 3D hardware acceleration support with Xorg %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "Ваша відэакарта можа мець 3D-паскарэнне, якое падтрымліваецца толькі Xorg %" "s.\n" "МАЙЦЕ НА ЎВАЗЕ, ШТО ГЭТА ЭКСПЕРЫМЕНТАЛЬНАЯ ПАДТРЫМКА І МОЖА ПРЫВЕСЦІ ДА\n" "ЗАВІСАННЯ ВАШАГА КАМП'ЮТЭРУ." #: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:117 any.pm:914 #, c-format msgid "Custom" msgstr "Па выбару" #: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14 #: install_steps_interactive.pm:86 printer/printerdrake.pm:737 #: printer/printerdrake.pm:4296 printer/printerdrake.pm:4742 #: standalone/draksplash:120 standalone/logdrake:174 standalone/net_applet:183 #: standalone/scannerdrake:477 #, c-format msgid "Quit" msgstr "Выхад" #: Xconfig/main.pm:117 #, fuzzy, c-format msgid "Graphic Card" msgstr "Відэакарта: %s" #: Xconfig/main.pm:120 Xconfig/monitor.pm:111 #, c-format msgid "Monitor" msgstr "Манітор" #: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:221 #, c-format msgid "Resolution" msgstr "Памеры экрану" #: Xconfig/main.pm:128 #, c-format msgid "Test" msgstr "Тэст" #: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:437 #: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80 #: standalone/drakfont:493 standalone/drakfont:555 #, c-format msgid "Options" msgstr "Опцыі" #: Xconfig/main.pm:168 #, c-format msgid "Your Xorg configuration file is broken, we will ignore it." msgstr "" #: Xconfig/main.pm:186 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "Ці жадаеце Вы захаваць змяненні?\n" "Бягучая канфігурацыя:\n" "\n" "%s" #: Xconfig/monitor.pm:112 #, fuzzy, c-format msgid "Choose a monitor for head #%d" msgstr "Абярыце манітор" #: Xconfig/monitor.pm:112 #, c-format msgid "Choose a monitor" msgstr "Абярыце манітор" #: Xconfig/monitor.pm:118 #, c-format msgid "Plug'n Play" msgstr "" #: Xconfig/monitor.pm:119 mouse.pm:49 #, c-format msgid "Generic" msgstr "Агульны" #: Xconfig/monitor.pm:120 standalone/drakconnect:569 standalone/harddrake2:52 #: standalone/harddrake2:86 #, fuzzy, c-format msgid "Vendor" msgstr "Рэдактары" #: Xconfig/monitor.pm:130 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "" #: Xconfig/monitor.pm:135 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "Два крытычных параметры - гэта часціня вертыкальнай разгорткі, ці\n" "часціня аднаўлення ўсяго экрану, а таксама болей важны параметр -\n" "часціня гарызантальнай сінхранізацыі разгорткі, ці часціня вываду\n" "радкоў экрану.\n" "\n" "ВЕЛЬМІ ВАЖНА, каб абраны вамі манітор меў часціню сінхранізацыі, якая\n" "не перавышае фактычныя магчымасці вашага манітору: у процілеглым выпадку\n" "вы можаце сапсаваць манітор.\n" "Калі вы сумняваецеся, абярыце кансерватыўныя настройкі." #: Xconfig/monitor.pm:142 #, c-format msgid "Horizontal refresh rate" msgstr "Часціня гарызантальный разгорткі" #: Xconfig/monitor.pm:143 #, c-format msgid "Vertical refresh rate" msgstr "Часціня вертыкальнай разгорткі" #: Xconfig/resolution_and_depth.pm:12 #, c-format msgid "256 colors (8 bits)" msgstr "256 колераў (8 бітаў)" #: Xconfig/resolution_and_depth.pm:13 #, c-format msgid "32 thousand colors (15 bits)" msgstr "32 тысячы колераў (15 бітаў)" #: Xconfig/resolution_and_depth.pm:14 #, c-format msgid "65 thousand colors (16 bits)" msgstr "65 тысяч колераў (16 бітаў)" #: Xconfig/resolution_and_depth.pm:15 #, c-format msgid "16 million colors (24 bits)" msgstr "16 мільёнаў колераў (24 біты)" #: Xconfig/resolution_and_depth.pm:133 #, c-format msgid "Resolutions" msgstr "Памеры экрану" #: Xconfig/resolution_and_depth.pm:270 #, c-format msgid "Choose the resolution and the color depth" msgstr "Выбар памераў экрану і глыбіні колеру" #: Xconfig/resolution_and_depth.pm:271 #, c-format msgid "Graphics card: %s" msgstr "Відэакарта: %s" #: Xconfig/resolution_and_depth.pm:285 interactive.pm:424 #: interactive/gtk.pm:768 interactive/http.pm:103 interactive/http.pm:156 #: interactive/newt.pm:317 interactive/newt.pm:419 interactive/stdio.pm:39 #: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172 #: standalone/drakTermServ:199 standalone/drakTermServ:490 #: standalone/drakbackup:3967 standalone/drakbackup:4027 #: standalone/drakbackup:4071 standalone/drakconnect:165 #: standalone/drakconnect:849 standalone/drakconnect:936 #: standalone/drakconnect:1035 standalone/drakfont:576 standalone/drakroam:388 #: standalone/drakups:208 standalone/net_monitor:344 ugtk2.pm:409 ugtk2.pm:506 #: ugtk2.pm:900 ugtk2.pm:923 #, c-format msgid "Ok" msgstr "Ок" #: Xconfig/resolution_and_depth.pm:285 diskdrake/smbnfs_gtk.pm:81 help.pm:89 #: help.pm:444 install_steps_gtk.pm:480 install_steps_interactive.pm:422 #: install_steps_interactive.pm:826 interactive.pm:425 interactive/gtk.pm:772 #: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:316 #: interactive/newt.pm:423 interactive/stdio.pm:39 interactive/stdio.pm:142 #: interactive/stdio.pm:176 printer/printerdrake.pm:3579 #: standalone/drakautoinst:217 standalone/drakbackup:3893 #: standalone/drakbackup:3897 standalone/drakbackup:3955 #: standalone/drakconnect:164 standalone/drakconnect:934 #: standalone/drakconnect:1034 standalone/drakfont:668 standalone/drakfont:745 #: standalone/drakups:215 standalone/logdrake:174 standalone/net_monitor:343 #: ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513 ugtk2.pm:900 #, c-format msgid "Cancel" msgstr "Адмена" #: Xconfig/resolution_and_depth.pm:285 diskdrake/hd_gtk.pm:153 #: install_steps_gtk.pm:228 install_steps_gtk.pm:629 interactive.pm:519 #: interactive/gtk.pm:638 interactive/gtk.pm:640 standalone/drakTermServ:284 #: standalone/drakbackup:3889 standalone/drakbug:104 #: standalone/drakconnect:160 standalone/drakconnect:245 #: standalone/drakfont:511 standalone/drakperm:134 standalone/draksec:336 #: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358 #: ugtk2.pm:1031 ugtk2.pm:1032 #, c-format msgid "Help" msgstr "Дапамога" #: Xconfig/test.pm:30 #, c-format msgid "Test of the configuration" msgstr "Праверка параметраў настройкі" #: Xconfig/test.pm:31 #, c-format msgid "Do you want to test the configuration?" msgstr "Ці жадаеце пратэсціраваць настройкі?" #: Xconfig/test.pm:31 #, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "" #: Xconfig/test.pm:69 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" #: Xconfig/test.pm:129 #, fuzzy, c-format msgid "Leaving in %d seconds" msgstr "%d секундаў" #: Xconfig/test.pm:129 #, fuzzy, c-format msgid "Is this the correct setting?" msgstr "Гэта дакладна?" #: Xconfig/various.pm:29 #, c-format msgid "Keyboard layout: %s\n" msgstr "Тып клавіятуры: %s\n" #: Xconfig/various.pm:30 #, c-format msgid "Mouse type: %s\n" msgstr "Тып мышы: %s\n" #: Xconfig/various.pm:31 #, c-format msgid "Mouse device: %s\n" msgstr "Мыш: %s\n" #: Xconfig/various.pm:33 #, c-format msgid "Monitor: %s\n" msgstr "Манітор: %s\n" #: Xconfig/various.pm:34 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Часціня гар.разг. манітору: %s\n" #: Xconfig/various.pm:35 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Часціня верт.разг. манітору: %s\n" #: Xconfig/various.pm:37 #, c-format msgid "Graphics card: %s\n" msgstr "Відэакарта: %s\n" #: Xconfig/various.pm:38 #, c-format msgid "Graphics memory: %s kB\n" msgstr "Відэапамяць: %s Кб\n" #: Xconfig/various.pm:40 #, c-format msgid "Color depth: %s\n" msgstr "Параметры глыбіні колеру: %s\n" #: Xconfig/various.pm:41 #, c-format msgid "Resolution: %s\n" msgstr "Памеры экрану: %s\n" #: Xconfig/various.pm:43 #, c-format msgid "Xorg driver: %s\n" msgstr "Сервер Xorg: %s\n" #: Xconfig/various.pm:72 #, c-format msgid "Graphical interface at startup" msgstr "Запуск X пры старце сістэмы" #: Xconfig/various.pm:74 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface " "(Xorg) upon booting.\n" "Would you like Xorg to start when you reboot?" msgstr "" "Можна настроіць сістэму для аўтаматычнага запуску X пасля старту сістэмы.\n" "Жадаеце, каб X стартаваў пры рэстарце?" #: Xconfig/various.pm:87 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" #: Xconfig/various.pm:99 #, c-format msgid "What norm is your TV using?" msgstr "" #: Xconfig/xfree.pm:571 #, c-format msgid "" "_:weird aspect ratio\n" "other" msgstr "" #: any.pm:140 harddrake/sound.pm:191 install_any.pm:652 interactive.pm:462 #: standalone/drakconnect:167 standalone/drakconnect:613 standalone/draksec:68 #: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:231 #: standalone/service_harddrake:204 #, c-format msgid "Please wait" msgstr "Калі ласка, пачакайце" #: any.pm:140 #, fuzzy, c-format msgid "Bootloader installation in progress" msgstr "Усталяванне загрузчыку" #: any.pm:151 #, c-format msgid "" "LILO wants to assign a new Volume ID to drive %s. However, changing\n" "the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows " "error.\n" "This caution does not apply to Windows 95 or 98, or to NT data disks.\n" "\n" "Assign a new Volume ID?" msgstr "" #: any.pm:162 #, c-format msgid "Installation of bootloader failed. The following error occurred:" msgstr "Працэс усталявання загрузчыка не атрымаўся. Узнікла наступная памылка:" #: any.pm:168 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you do not see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" #: any.pm:206 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" #: any.pm:229 help.pm:739 #, c-format msgid "First sector of drive (MBR)" msgstr "Першы сектар прылады (MBR)" #: any.pm:230 #, fuzzy, c-format msgid "First sector of the root partition" msgstr "Першы сектар загрузачнага раздзелу" #: any.pm:232 #, fuzzy, c-format msgid "On Floppy" msgstr "Захаванне на дыскету" #: any.pm:234 help.pm:739 printer/printerdrake.pm:3962 #, c-format msgid "Skip" msgstr "Прапусціць" #: any.pm:238 #, c-format msgid "LILO/grub Installation" msgstr "Усталяванне LILO/GRUB" #: any.pm:239 #, c-format msgid "Where do you want to install the bootloader?" msgstr "Куды вы жадаеце ўсталяваць пачатковы загрузчык?" #: any.pm:264 standalone/drakboot:307 #, fuzzy, c-format msgid "Boot Style Configuration" msgstr "Настройка IDE" #: any.pm:266 any.pm:298 #, c-format msgid "Bootloader main options" msgstr "Галоўныя опцыі пачатковага загрузчыку" #: any.pm:270 #, c-format msgid "Give the ram size in MB" msgstr "Пазначце памер RAM у Мб" #: any.pm:272 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" "Опцыя ‟Абмежаванне опцыяў каманднага радку“ не выкарыстоўваецца без пароля" #: any.pm:273 any.pm:606 authentication.pm:176 #, c-format msgid "The passwords do not match" msgstr "Паролі не супадаюць" #: any.pm:273 any.pm:606 authentication.pm:176 diskdrake/interactive.pm:1270 #, c-format msgid "Please try again" msgstr "Паспрабуйце яшчэ раз" #: any.pm:278 any.pm:301 #, fuzzy, c-format msgid "Bootloader to use" msgstr "Галоўныя опцыі пачатковага загрузчыку" #: any.pm:280 any.pm:303 #, c-format msgid "Boot device" msgstr "Загрузачная прылада" #: any.pm:282 #, c-format msgid "Delay before booting default image" msgstr "Затрымка перад загрузкай вобразу па дамаўленню" #: any.pm:283 #, c-format msgid "Enable ACPI" msgstr "" #: any.pm:285 #, c-format msgid "Force no APIC" msgstr "" #: any.pm:287 #, c-format msgid "Force No Local APIC" msgstr "" #: any.pm:289 any.pm:633 authentication.pm:181 diskdrake/smbnfs_gtk.pm:180 #: network/netconnect.pm:633 printer/printerdrake.pm:1596 #: printer/printerdrake.pm:1716 standalone/drakbackup:1653 #: standalone/drakbackup:3495 standalone/drakups:295 #, c-format msgid "Password" msgstr "Пароль" #: any.pm:290 any.pm:634 authentication.pm:182 #, c-format msgid "Password (again)" msgstr "Паўтарыце пароль" #: any.pm:291 #, c-format msgid "Restrict command line options" msgstr "Абмежаванне опцыяў каманднага радка" #: any.pm:291 #, c-format msgid "restrict" msgstr "абмежаванне" #: any.pm:293 #, c-format msgid "Clean /tmp at each boot" msgstr "Ачышчаць /tmp пры кожнай загрузцы" #: any.pm:294 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Пазначце дакладны памер RAM (знойдзена %d Мб)" #: any.pm:302 #, c-format msgid "Init Message" msgstr "" #: any.pm:304 #, c-format msgid "Open Firmware Delay" msgstr "" #: any.pm:305 #, c-format msgid "Kernel Boot Timeout" msgstr "" #: any.pm:306 #, fuzzy, c-format msgid "Enable CD Boot?" msgstr "Дазволіць 6dB павышэнне + цяжкае лімітаванне" #: any.pm:307 #, fuzzy, c-format msgid "Enable OF Boot?" msgstr "Дазволіць 6dB павышэнне + цяжкае лімітаванне" #: any.pm:308 #, fuzzy, c-format msgid "Default OS?" msgstr "Па дамаўленню" #: any.pm:361 #, c-format msgid "Image" msgstr "Вобраз" #: any.pm:362 any.pm:372 #, c-format msgid "Root" msgstr "Root" #: any.pm:363 any.pm:385 #, c-format msgid "Append" msgstr "Далучыць" #: any.pm:365 standalone/drakboot:309 standalone/drakboot:313 #, c-format msgid "Video mode" msgstr "Відэа-рэжым" #: any.pm:367 #, c-format msgid "Initrd" msgstr "Initrd" #: any.pm:368 #, fuzzy, c-format msgid "Network profile" msgstr "Сеткавы інтэрфейс" #: any.pm:377 any.pm:382 any.pm:384 #, c-format msgid "Label" msgstr "Метка" #: any.pm:379 any.pm:389 harddrake/v4l.pm:275 standalone/drakfloppy:84 #: standalone/drakfloppy:90 standalone/draksec:52 #, c-format msgid "Default" msgstr "Па дамаўленню" #: any.pm:386 #, fuzzy, c-format msgid "Initrd-size" msgstr "Initrd" #: any.pm:388 #, fuzzy, c-format msgid "NoVideo" msgstr "Відэа" #: any.pm:399 #, c-format msgid "Empty label not allowed" msgstr "Пустая метка не дазваляецца" #: any.pm:400 #, c-format msgid "You must specify a kernel image" msgstr "" #: any.pm:400 #, fuzzy, c-format msgid "You must specify a root partition" msgstr "Першы сектар загрузачнага раздзелу" #: any.pm:401 #, c-format msgid "This label is already used" msgstr "Гэтая метка ўжо выкарыстоўваецца" #: any.pm:415 #, c-format msgid "Which type of entry do you want to add?" msgstr "Які тып пункта жадаеце дадаць?" #: any.pm:416 #, c-format msgid "Linux" msgstr "Linux" #: any.pm:416 #, c-format msgid "Other OS (SunOS...)" msgstr "Іншая АС (SunOS,...)" #: any.pm:417 #, c-format msgid "Other OS (MacOS...)" msgstr "Іншая АС (MacOS,...)" #: any.pm:417 #, c-format msgid "Other OS (Windows...)" msgstr "Іншая АС (Windows...)" #: any.pm:445 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "У меню маюцца наступныя пункты.\n" "Вы можаце дадаць яшчэ, альбо змяніць існуючыя." #: any.pm:592 #, c-format msgid "access to X programs" msgstr "" #: any.pm:593 #, c-format msgid "access to rpm tools" msgstr "" #: any.pm:594 #, c-format msgid "allow \"su\"" msgstr "" #: any.pm:595 #, fuzzy, c-format msgid "access to administrative files" msgstr "Выкарыстоўваць настройкі сыстэмнага адміністратара" #: any.pm:596 #, c-format msgid "access to network tools" msgstr "" #: any.pm:597 #, fuzzy, c-format msgid "access to compilation tools" msgstr "Канфігурацыя сістэмных сэрвісаў" #: any.pm:602 #, c-format msgid "(already added %s)" msgstr "(ужо дададзена %s)" #: any.pm:607 #, c-format msgid "This password is too simple" msgstr "Гэты пароль занадта просты" #: any.pm:608 #, c-format msgid "Please give a user name" msgstr "Калі ласка, увядзіце імя карыстальніку" #: any.pm:609 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" "Імя карыстальніку павінна змяшчаць літары толькі на ніжнім рэгістры, \n" "лічбы, ‛-’ і ‛_’" #: any.pm:610 #, fuzzy, c-format msgid "The user name is too long" msgstr "Імя занадта доўгае" #: any.pm:611 #, c-format msgid "This user name has already been added" msgstr "Гэта імя карыстальніку ўжо дададзена" #: any.pm:615 #, c-format msgid "Add user" msgstr "Дадаць карыстальніка" #: any.pm:616 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Увядзіце імя карыстальніку\n" "%s" #: any.pm:619 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157 #: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530 #: interactive/http.pm:151 printer/printerdrake.pm:191 #: printer/printerdrake.pm:376 printer/printerdrake.pm:4742 #: standalone/drakbackup:2708 standalone/scannerdrake:668 #: standalone/scannerdrake:818 #, c-format msgid "Done" msgstr "Зроблена" #: any.pm:620 help.pm:51 #, c-format msgid "Accept user" msgstr "Прыняць карыстальніка" #: any.pm:631 #, c-format msgid "Real name" msgstr "Уласнае імя" #: any.pm:632 standalone/drakbackup:1648 #, fuzzy, c-format msgid "Login name" msgstr "Гульня ў косьці" #: any.pm:635 #, c-format msgid "Shell" msgstr "Абалонка:" #: any.pm:637 #, c-format msgid "Icon" msgstr "Піктаграма" #: any.pm:684 security/l10n.pm:14 #, c-format msgid "Autologin" msgstr "Аўтаматычны ўваход у сістэму" #: any.pm:685 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "" #: any.pm:686 help.pm:51 #, fuzzy, c-format msgid "Do you want to use this feature?" msgstr "Вы жадаеце выкарыстоўваць aboot?" #: any.pm:687 #, c-format msgid "Choose the default user:" msgstr "Абярыце асноўнага карыстальніка:" #: any.pm:688 #, c-format msgid "Choose the window manager to run:" msgstr "Абярыце мэнэджар вокнаў:" #: any.pm:700 #, fuzzy, c-format msgid "Please choose a language to use." msgstr "калі ласка, пазначце тып вашай мышы." #: any.pm:701 #, fuzzy, c-format msgid "Language choice" msgstr "Выбар мовы" #: any.pm:727 #, c-format msgid "" "Mandrakelinux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "Вы можаце абраць іншыя мовы, якія будуць даступны пасля ўсталявання" #: any.pm:746 help.pm:647 #, c-format msgid "Use Unicode by default" msgstr "" #: any.pm:747 help.pm:647 #, fuzzy, c-format msgid "All languages" msgstr "Выбар мовы" #: any.pm:786 help.pm:566 help.pm:855 install_steps_interactive.pm:946 #, fuzzy, c-format msgid "Country / Region" msgstr "Краіна - рэгіён і мова" #: any.pm:787 #, fuzzy, c-format msgid "Please choose your country." msgstr "калі ласка, пазначце тып вашай мышы." #: any.pm:789 #, c-format msgid "Here is the full list of available countries" msgstr "" #: any.pm:790 #, fuzzy, c-format msgid "Other Countries" msgstr "Парты вываду:" #: any.pm:798 #, c-format msgid "Input method:" msgstr "" #: any.pm:799 install_any.pm:388 network/netconnect.pm:323 #: network/netconnect.pm:328 printer/printerdrake.pm:99 #: printer/printerdrake.pm:2111 #, c-format msgid "None" msgstr "Нічога" #: any.pm:914 #, fuzzy, c-format msgid "No sharing" msgstr "Нічога" #: any.pm:914 #, fuzzy, c-format msgid "Allow all users" msgstr "Дадаць карыстальніка" #: any.pm:918 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" #: any.pm:930 #, c-format msgid "" "NFS: the traditional Unix file sharing system, with less support on Mac and " "Windows." msgstr "" #: any.pm:933 #, c-format msgid "" "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux " "systems." msgstr "" #: any.pm:941 #, c-format msgid "" "You can export using NFS or SMB. Please select which you would like to use." msgstr "" #: any.pm:966 #, c-format msgid "Launch userdrake" msgstr "" #: any.pm:966 printer/printerdrake.pm:3802 printer/printerdrake.pm:3805 #: printer/printerdrake.pm:3806 printer/printerdrake.pm:3807 #: printer/printerdrake.pm:5036 standalone/drakTermServ:294 #: standalone/drakbackup:4089 standalone/drakbug:126 standalone/drakfont:499 #: standalone/drakfont:595 standalone/net_monitor:123 #: standalone/printerdrake:547 #, c-format msgid "Close" msgstr "Зачыніць" #: any.pm:968 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" #: authentication.pm:16 #, c-format msgid "Local file" msgstr "Лякальны файл" #: authentication.pm:17 #, c-format msgid "LDAP" msgstr "" #: authentication.pm:18 #, c-format msgid "NIS" msgstr "" #: authentication.pm:19 #, c-format msgid "Smart Card" msgstr "" #: authentication.pm:20 authentication.pm:148 #, fuzzy, c-format msgid "Windows Domain" msgstr "Уласьцівасьці акна" #: authentication.pm:21 #, c-format msgid "Active Directory with SFU" msgstr "" #: authentication.pm:22 #, c-format msgid "Active Directory with Winbind" msgstr "" #: authentication.pm:51 #, fuzzy, c-format msgid "Local file:" msgstr "Загрузіць файл(ы):" #: authentication.pm:51 #, c-format msgid "" "Use local for all authentication and information user tell in local file" msgstr "" #: authentication.pm:52 #, c-format msgid "LDAP:" msgstr ":" #: authentication.pm:52 #, c-format msgid "" "Tells your computer to use LDAP for some or all authentication. LDAP " "consolidates certain types of information within your organization." msgstr "" #: authentication.pm:53 #, c-format msgid "NIS:" msgstr ":" #: authentication.pm:53 #, c-format msgid "" "Allows you to run a group of computers in the same Network Information " "Service domain with a common password and group file." msgstr "" #: authentication.pm:54 #, fuzzy, c-format msgid "Windows Domain:" msgstr "Уласьцівасьці акна:" #: authentication.pm:54 #, c-format msgid "" "Winbind allows the system to retrieve information and authenticate users in " "a Windows domain." msgstr "" #: authentication.pm:55 #, c-format msgid "Active Directory with SFU:" msgstr "" #: authentication.pm:55 authentication.pm:56 #, c-format msgid "" "Kerberos is a secure system for providing network authentication services." msgstr "" #: authentication.pm:56 #, c-format msgid "Active Directory with Winbind:" msgstr "" #: authentication.pm:81 #, fuzzy, c-format msgid "Authentication LDAP" msgstr "Аўтэнтыфікацыя" #: authentication.pm:82 #, c-format msgid "LDAP Base dn" msgstr "" #: authentication.pm:83 share/compssUsers.pl:101 #, fuzzy, c-format msgid "LDAP Server" msgstr "Сервак" #: authentication.pm:96 fsedit.pm:21 #, fuzzy, c-format msgid "simple" msgstr "Тэма" #: authentication.pm:97 #, c-format msgid "TLS" msgstr "TLS" #: authentication.pm:98 #, c-format msgid "SSL" msgstr "SSL" #: authentication.pm:99 #, c-format msgid "security layout (SASL/Kerberos)" msgstr "" #: authentication.pm:106 authentication.pm:144 #, fuzzy, c-format msgid "Authentication Active Directory" msgstr "Аўтэнтыфікацыя" #: authentication.pm:107 authentication.pm:146 diskdrake/smbnfs_gtk.pm:181 #, c-format msgid "Domain" msgstr "Маёнтак" #: authentication.pm:109 diskdrake/dav.pm:63 help.pm:146 #: printer/printerdrake.pm:135 share/compssUsers.pl:81 #: standalone/drakTermServ:269 #, c-format msgid "Server" msgstr "Сервак" #: authentication.pm:110 #, fuzzy, c-format msgid "LDAP users database" msgstr "База даньняў дыскаў" #: authentication.pm:111 #, c-format msgid "Use Anonymous BIND " msgstr "" #: authentication.pm:112 #, c-format msgid "LDAP user allowed to browse the Active Directory" msgstr "" #: authentication.pm:113 #, fuzzy, c-format msgid "Password for user" msgstr "Настроіць паролі" #: authentication.pm:114 #, c-format msgid "Encryption" msgstr "Шыфраваньне" #: authentication.pm:125 #, fuzzy, c-format msgid "Authentication NIS" msgstr "Аўтэнтыфікацыя" #: authentication.pm:126 #, c-format msgid "NIS Domain" msgstr "NIS Domain" #: authentication.pm:127 #, c-format msgid "NIS Server" msgstr "NIS сэервер:" #: authentication.pm:132 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" #: authentication.pm:144 #, fuzzy, c-format msgid "Authentication Windows Domain" msgstr "Аўтэнтыфікацыя" #: authentication.pm:149 #, fuzzy, c-format msgid "Domain Admin User Name" msgstr "Імя дамену" #: authentication.pm:150 #, fuzzy, c-format msgid "Domain Admin Password" msgstr "Яшчэ раз пароль:" #: authentication.pm:151 #, c-format msgid "Use Idmap for store UID/SID " msgstr "" #: authentication.pm:152 #, fuzzy, c-format msgid "Default Idmap " msgstr "Скура Па ўмаўчанні" #: authentication.pm:165 #, c-format msgid "Set administrator (root) password and network authentication methods" msgstr "" #: authentication.pm:166 #, fuzzy, c-format msgid "Set administrator (root) password" msgstr "Пароль для root" #: authentication.pm:167 standalone/drakvpn:1125 #, fuzzy, c-format msgid "Authentication method" msgstr "Аўтэнтыфікацыя" #. -PO: keep this short or else the buttons will not fit in the window #: authentication.pm:172 help.pm:722 #, c-format msgid "No password" msgstr "Няма паролю" #: authentication.pm:178 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "" "Гэты пароль занадта просты (яго даўжыня павінна быць не меней за %d літараў)" #: authentication.pm:183 network/netconnect.pm:328 network/netconnect.pm:634 #: standalone/drakauth:23 standalone/drakauth:25 standalone/drakconnect:459 #, c-format msgid "Authentication" msgstr "Аўтэнтыфікацыя" #: authentication.pm:296 #, c-format msgid "Can not use broadcast with no NIS domain" msgstr "Немагчыма выкарыстоўваць broadcast без дамена NIS" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: bootloader.pm:728 #, c-format msgid "" "Welcome to the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait for default boot.\n" "\n" msgstr "" #: bootloader.pm:815 #, c-format msgid "LILO with graphical menu" msgstr "" #: bootloader.pm:816 #, c-format msgid "LILO with text menu" msgstr "" #: bootloader.pm:817 #, c-format msgid "Grub" msgstr "Grub" #: bootloader.pm:818 #, c-format msgid "Yaboot" msgstr "Yaboot" #: bootloader.pm:881 #, c-format msgid "not enough room in /boot" msgstr "Не хапае дыскавай прасторы ў /boot" #: bootloader.pm:1295 #, fuzzy, c-format msgid "You can not install the bootloader on a %s partition\n" msgstr "Куды вы жадаеце ўсталяваць пачатковы загрузчык?" #: bootloader.pm:1340 #, c-format msgid "" "Your bootloader configuration must be updated because partition has been " "renumbered" msgstr "" #: bootloader.pm:1355 #, c-format msgid "" "The bootloader can not be installed correctly. You have to boot rescue and " "choose \"%s\"" msgstr "" #: bootloader.pm:1356 #, fuzzy, c-format msgid "Re-install Boot Loader" msgstr "Усталяванне загрузчыку" #: common.pm:125 #, c-format msgid "KB" msgstr "кб" #: common.pm:125 #, c-format msgid "MB" msgstr "Мб" #: common.pm:125 #, c-format msgid "GB" msgstr "Гб" #: common.pm:133 #, c-format msgid "TB" msgstr "" #: common.pm:141 #, c-format msgid "%d minutes" msgstr "%d хвілін" #: common.pm:143 #, c-format msgid "1 minute" msgstr "1 хвіліна" #: common.pm:145 #, c-format msgid "%d seconds" msgstr "%d секундаў" #: common.pm:240 #, c-format msgid "kdesu missing" msgstr "" #: common.pm:243 #, c-format msgid "consolehelper missing" msgstr "" #: crypto.pm:14 crypto.pm:43 lang.pm:202 network/adsl_consts.pm:50 #: network/adsl_consts.pm:58 network/adsl_consts.pm:66 #, c-format msgid "Austria" msgstr "Аўстрыя" #: crypto.pm:15 crypto.pm:34 lang.pm:209 network/adsl_consts.pm:74 #: network/adsl_consts.pm:82 network/adsl_consts.pm:93 #: network/adsl_consts.pm:101 network/netconnect.pm:50 #, c-format msgid "Belgium" msgstr "Бельгія" #: crypto.pm:16 lang.pm:230 network/adsl_consts.pm:780 #: network/adsl_consts.pm:788 network/adsl_consts.pm:798 #, c-format msgid "Switzerland" msgstr "Щвэйцарыя" #: crypto.pm:17 lang.pm:237 #, c-format msgid "Costa Rica" msgstr "Коста-Рыка" #: crypto.pm:18 crypto.pm:35 lang.pm:243 network/adsl_consts.pm:319 #, c-format msgid "Czech Republic" msgstr "Чэская Рэспубліка" #: crypto.pm:19 crypto.pm:36 lang.pm:244 network/adsl_consts.pm:437 #: network/adsl_consts.pm:445 #, c-format msgid "Germany" msgstr "Нямецкі" #: crypto.pm:20 crypto.pm:33 lang.pm:262 network/adsl_consts.pm:343 #: network/adsl_consts.pm:354 network/adsl_consts.pm:365 #: network/adsl_consts.pm:375 network/adsl_consts.pm:385 #: network/adsl_consts.pm:396 network/adsl_consts.pm:407 #: network/adsl_consts.pm:417 network/adsl_consts.pm:427 #: network/netconnect.pm:47 #, c-format msgid "France" msgstr "Францыя" #: crypto.pm:21 crypto.pm:37 lang.pm:275 network/adsl_consts.pm:455 #, c-format msgid "Greece" msgstr "Грэцыя" #: crypto.pm:22 lang.pm:286 network/adsl_consts.pm:463 #, c-format msgid "Hungary" msgstr "Вугоршчына" #: crypto.pm:23 crypto.pm:42 lang.pm:295 network/adsl_consts.pm:489 #: network/adsl_consts.pm:499 network/adsl_consts.pm:509 #: network/adsl_consts.pm:517 network/netconnect.pm:49 standalone/drakxtv:47 #, c-format msgid "Italy" msgstr "Італія" #: crypto.pm:24 crypto.pm:41 lang.pm:347 network/adsl_consts.pm:545 #: network/adsl_consts.pm:553 network/adsl_consts.pm:561 #: network/adsl_consts.pm:569 network/netconnect.pm:48 #, c-format msgid "Netherlands" msgstr "Нідэрлянды" #: crypto.pm:25 crypto.pm:38 lang.pm:348 network/adsl_consts.pm:577 #: network/adsl_consts.pm:582 network/adsl_consts.pm:587 #: network/adsl_consts.pm:592 network/adsl_consts.pm:597 #: network/adsl_consts.pm:602 network/adsl_consts.pm:607 #, c-format msgid "Norway" msgstr "Нарвэгія" #: crypto.pm:26 lang.pm:360 network/adsl_consts.pm:614 #: network/adsl_consts.pm:624 #, c-format msgid "Poland" msgstr "Польшча" #: crypto.pm:27 crypto.pm:39 lang.pm:377 network/adsl_consts.pm:772 #, c-format msgid "Sweden" msgstr "Швэцыя" #: crypto.pm:28 lang.pm:382 #, c-format msgid "Slovakia" msgstr "Словакія" #: crypto.pm:29 lang.pm:406 #, c-format msgid "Taiwan" msgstr "Тайвань" #: crypto.pm:40 crypto.pm:75 lang.pm:411 network/netconnect.pm:51 #, c-format msgid "United States" msgstr "Злучаныя Штаты" #: diskdrake/dav.pm:17 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" #: diskdrake/dav.pm:25 #, c-format msgid "New" msgstr "Новы" #: diskdrake/dav.pm:61 diskdrake/interactive.pm:443 diskdrake/smbnfs_gtk.pm:75 #, c-format msgid "Unmount" msgstr "Разманціраваць" #: diskdrake/dav.pm:62 diskdrake/interactive.pm:440 diskdrake/smbnfs_gtk.pm:76 #, c-format msgid "Mount" msgstr "Манціраванне" #: diskdrake/dav.pm:64 diskdrake/interactive.pm:435 #: diskdrake/interactive.pm:653 diskdrake/interactive.pm:672 #: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79 #, c-format msgid "Mount point" msgstr "Кропка манціравання" #: diskdrake/dav.pm:83 #, c-format msgid "Please enter the WebDAV server URL" msgstr "" #: diskdrake/dav.pm:87 #, c-format msgid "The URL must begin with http:// or https://" msgstr "" #: diskdrake/dav.pm:109 #, c-format msgid "Server: " msgstr "Паслужнік: " #: diskdrake/dav.pm:110 diskdrake/interactive.pm:504 #: diskdrake/interactive.pm:1166 diskdrake/interactive.pm:1241 #, c-format msgid "Mount point: " msgstr "Пункт манціравання:" #: diskdrake/dav.pm:111 diskdrake/interactive.pm:1248 #, c-format msgid "Options: %s" msgstr "Опцыі: %s" #: diskdrake/hd_gtk.pm:95 #, c-format msgid "Please make a backup of your data first" msgstr "Па-першае, зрабіце рэзервовую копію вашых дадзеных" #: diskdrake/hd_gtk.pm:98 #, c-format msgid "" "If you plan to use aboot, be careful to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Калі вы плануеце выкарыстоўваць boot вобласць, тады размясціце яе\n" " не далей за 2048 сектароў ад пачатку дыска" #: diskdrake/hd_gtk.pm:155 help.pm:530 #, c-format msgid "Wizard" msgstr "Майстар стварэння" #: diskdrake/hd_gtk.pm:188 #, c-format msgid "Choose action" msgstr "Абярыце дзеянне" #: diskdrake/hd_gtk.pm:192 #, c-format msgid "" "You have one big Microsoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" #: diskdrake/hd_gtk.pm:194 #, c-format msgid "Please click on a partition" msgstr "Націсніце на раздзел" #: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:482 #: standalone/drakbackup:2943 standalone/drakbackup:3003 #, c-format msgid "Details" msgstr "Падрабязнасці" #: diskdrake/hd_gtk.pm:254 #, fuzzy, c-format msgid "No hard drives found" msgstr "Вызначэнне жорсткага дыску" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "Ext2" msgstr "Ext2" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "Journalised FS" msgstr "" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "Swap" msgstr "Swap" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "SunOS" msgstr "SunOS" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "HFS" msgstr "HFS" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "Windows" msgstr "Вокны" #: diskdrake/hd_gtk.pm:339 install_steps_gtk.pm:284 mouse.pm:168 #: services.pm:162 standalone/drakbackup:1609 standalone/drakperm:250 #, c-format msgid "Other" msgstr "Іншыя" #: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1181 #, c-format msgid "Empty" msgstr "Пуста" #: diskdrake/hd_gtk.pm:343 #, c-format msgid "Filesystem types:" msgstr "Тыпы файлавых сістэмаў:" #: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368 #, c-format msgid "Use ``%s'' instead" msgstr "Выкарыстоўвайце ‟%s” замест" #: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:459 #, c-format msgid "Create" msgstr "Стварыць" #: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368 #: diskdrake/interactive.pm:436 diskdrake/interactive.pm:606 #: diskdrake/removable.pm:25 diskdrake/removable.pm:48 #: standalone/harddrake2:106 standalone/harddrake2:115 #, c-format msgid "Type" msgstr "Тып" #. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE #: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:444 #: standalone/drakperm:124 standalone/printerdrake:235 #, c-format msgid "Delete" msgstr "Знішчыць" #: diskdrake/hd_gtk.pm:368 #, c-format msgid "Use ``Unmount'' first" msgstr "Спачатку зрабіце ‟Unmount”" #: diskdrake/interactive.pm:191 #, fuzzy, c-format msgid "Choose another partition" msgstr "Стварэнне новага раздзелу" #: diskdrake/interactive.pm:191 #, fuzzy, c-format msgid "Choose a partition" msgstr "Абярыце дзеянне" #: diskdrake/interactive.pm:220 #, c-format msgid "Exit" msgstr "Выход" #: diskdrake/interactive.pm:253 help.pm:530 #, c-format msgid "Undo" msgstr "Адкат" #: diskdrake/interactive.pm:253 #, c-format msgid "Toggle to normal mode" msgstr "Звычайны рэжым" #: diskdrake/interactive.pm:253 #, c-format msgid "Toggle to expert mode" msgstr "Рэжым эксперту" #: diskdrake/interactive.pm:272 #, c-format msgid "Continue anyway?" msgstr "Сапраўды працягваць?" #: diskdrake/interactive.pm:275 #, c-format msgid "" "You should format partition %s.\n" "Otherwise no entry for mount point %s will be written in fstab.\n" "Quit anyway?" msgstr "" #: diskdrake/interactive.pm:282 #, c-format msgid "Quit without saving" msgstr "Выйсці без захавання" #: diskdrake/interactive.pm:282 #, c-format msgid "Quit without writing the partition table?" msgstr "Выйсці без запісу табліцы раздзелаў" #: diskdrake/interactive.pm:287 #, fuzzy, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "Ці жадаеце пратэсціраваць настройкі?" #: diskdrake/interactive.pm:294 install_steps_interactive.pm:329 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "Каб мадыфікацыя табліцы раздзелаў здейснілася, патрэбна перазагрузка." #: diskdrake/interactive.pm:307 help.pm:530 #, c-format msgid "Clear all" msgstr "Ачысціць усё" #: diskdrake/interactive.pm:308 help.pm:530 #, c-format msgid "Auto allocate" msgstr "Размеркаваць аўтаматычна" #: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606 #: help.pm:855 install_steps_interactive.pm:122 #, fuzzy, c-format msgid "More" msgstr "Перанос" #: diskdrake/interactive.pm:314 #, fuzzy, c-format msgid "Hard drive information" msgstr "Канфігурацыя сістэмных сэрвісаў" #: diskdrake/interactive.pm:346 #, c-format msgid "All primary partitions are used" msgstr "Усе першасныя раздзелы выкарыстаны" #: diskdrake/interactive.pm:347 #, c-format msgid "I can not add any more partitions" msgstr "Дадаць раздзел немагчыма" #: diskdrake/interactive.pm:348 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "Каб зрабіць больш разделаў, выдаліце адзін і стварыце пашыраны раздзел " "(extended)" #: diskdrake/interactive.pm:359 help.pm:530 #, fuzzy, c-format msgid "Save partition table" msgstr "Дадатковая табліца раздзелаў" #: diskdrake/interactive.pm:360 help.pm:530 #, fuzzy, c-format msgid "Restore partition table" msgstr "Дадатковая табліца раздзелаў" #: diskdrake/interactive.pm:361 help.pm:530 #, c-format msgid "Rescue partition table" msgstr "Дадатковая табліца раздзелаў" #: diskdrake/interactive.pm:363 help.pm:530 #, fuzzy, c-format msgid "Reload partition table" msgstr "Дадатковая табліца раздзелаў" #: diskdrake/interactive.pm:365 #, c-format msgid "Removable media automounting" msgstr "" #: diskdrake/interactive.pm:376 diskdrake/interactive.pm:402 #, c-format msgid "Select file" msgstr "Абярыце файл" #: diskdrake/interactive.pm:388 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "Табліца размяшчэння рэзервовага дыску мае іншы памер\n" "Працягваць далей?" #: diskdrake/interactive.pm:417 #, c-format msgid "Trying to rescue partition table" msgstr "Паспрабуем выратаваць табліцу раздзелаў" #: diskdrake/interactive.pm:423 #, fuzzy, c-format msgid "Detailed information" msgstr "Інфармацыя аб DMA" #: diskdrake/interactive.pm:438 diskdrake/interactive.pm:743 #, c-format msgid "Resize" msgstr "Змяненне памераў" #: diskdrake/interactive.pm:439 #, c-format msgid "Format" msgstr "Фарматаванне" #: diskdrake/interactive.pm:441 #, c-format msgid "Add to RAID" msgstr "Дадаць да RAID" #: diskdrake/interactive.pm:442 #, c-format msgid "Add to LVM" msgstr "Дадаць да LVM" #: diskdrake/interactive.pm:445 #, c-format msgid "Remove from RAID" msgstr "Выдаліць з RAID" #: diskdrake/interactive.pm:446 #, c-format msgid "Remove from LVM" msgstr "Выдаліць з LVM" #: diskdrake/interactive.pm:447 #, c-format msgid "Modify RAID" msgstr "Змяніць RAID" #: diskdrake/interactive.pm:448 #, c-format msgid "Use for loopback" msgstr "Выкарыстоўваць для віртуальнай файлавай сістэмы" #: diskdrake/interactive.pm:497 #, c-format msgid "Create a new partition" msgstr "Стварэнне новага раздзелу" #: diskdrake/interactive.pm:500 #, c-format msgid "Start sector: " msgstr "Пачатковы сектар:" #: diskdrake/interactive.pm:502 diskdrake/interactive.pm:899 #, c-format msgid "Size in MB: " msgstr "Памер у Мб:" #: diskdrake/interactive.pm:503 diskdrake/interactive.pm:900 #, c-format msgid "Filesystem type: " msgstr "Тып файлавай сістэмы:" #: diskdrake/interactive.pm:508 #, c-format msgid "Preference: " msgstr "Параметры: " #: diskdrake/interactive.pm:511 #, fuzzy, c-format msgid "Logical volume name " msgstr "Гульня ў косьці" #: diskdrake/interactive.pm:541 #, c-format msgid "" "You can not create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" #: diskdrake/interactive.pm:571 #, fuzzy, c-format msgid "Remove the loopback file?" msgstr "/Выдаліць дохлыя файлы" #: diskdrake/interactive.pm:590 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "Усе дадзеныя ў раздзеле %s будуць страчаны пасля змены яго тыпу" #: diskdrake/interactive.pm:602 #, c-format msgid "Change partition type" msgstr "Змяніць тып раздзелу" #: diskdrake/interactive.pm:603 diskdrake/removable.pm:47 #, fuzzy, c-format msgid "Which filesystem do you want?" msgstr "Які тып пункта жадаеце дадаць?" #: diskdrake/interactive.pm:611 #, c-format msgid "Switching from ext2 to ext3" msgstr "" #: diskdrake/interactive.pm:640 #, fuzzy, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "Куды вы жадаеце манціраваць прыладу %s?" #: diskdrake/interactive.pm:641 #, c-format msgid "Where do you want to mount device %s?" msgstr "Куды вы жадаеце манціраваць прыладу %s?" #: diskdrake/interactive.pm:646 #, c-format msgid "" "Can not unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "Нельга ўсталяваць пункт манціравання, таму што раздел выкарыстоўваецца для\n" "віртуальнай файлавай сістэмы.\n" "Спачатку выдаліце віртуальную сістэму" #: diskdrake/interactive.pm:671 #, fuzzy, c-format msgid "Where do you want to mount %s?" msgstr "Куды вы жадаеце манціраваць прыладу %s?" #: diskdrake/interactive.pm:695 diskdrake/interactive.pm:774 #: install_interactive.pm:156 install_interactive.pm:188 #, c-format msgid "Resizing" msgstr "Змяненне памераў" #: diskdrake/interactive.pm:695 #, c-format msgid "Computing FAT filesystem bounds" msgstr "Падлік межаў файлавай сістэмы FAT" #: diskdrake/interactive.pm:731 #, fuzzy, c-format msgid "This partition is not resizeable" msgstr "Памеры якога раздзела вы жадаеце змяніць?" #: diskdrake/interactive.pm:736 #, c-format msgid "All data on this partition should be backed-up" msgstr "Усе дадзеныя ў гэтым раздзеле павінны быць зархіваваныя" #: diskdrake/interactive.pm:738 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "Усе дадзеныя ў раздзеле %s будуць страчаны" #: diskdrake/interactive.pm:743 #, c-format msgid "Choose the new size" msgstr "Выбар новых памераў" #: diskdrake/interactive.pm:744 #, fuzzy, c-format msgid "New size in MB: " msgstr "Памер у Мб:" #: diskdrake/interactive.pm:787 install_interactive.pm:196 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" #: diskdrake/interactive.pm:825 #, c-format msgid "Choose an existing RAID to add to" msgstr "Абярыце існуючы RAID для дадання" #: diskdrake/interactive.pm:827 diskdrake/interactive.pm:844 #, c-format msgid "new" msgstr "новы" #: diskdrake/interactive.pm:842 #, c-format msgid "Choose an existing LVM to add to" msgstr "Выбярыце існуючы LVM для дабаўлення" #: diskdrake/interactive.pm:848 #, c-format msgid "LVM name?" msgstr "" #: diskdrake/interactive.pm:884 #, c-format msgid "This partition can not be used for loopback" msgstr "Гэты раздзел не можа быць выкарыстаны пад віртуальную файлавую сістэму" #: diskdrake/interactive.pm:897 #, c-format msgid "Loopback" msgstr "Віртуальная файлавая сістэма (loopback)" #: diskdrake/interactive.pm:898 #, c-format msgid "Loopback file name: " msgstr "Імя віртуальнага раздзелу" #: diskdrake/interactive.pm:903 #, fuzzy, c-format msgid "Give a file name" msgstr "Уласнае імя" #: diskdrake/interactive.pm:906 #, c-format msgid "File is already used by another loopback, choose another one" msgstr "" #: diskdrake/interactive.pm:907 #, c-format msgid "File already exists. Use it?" msgstr "Файл ужо існуе. Выкарыстаць яго?" #: diskdrake/interactive.pm:930 #, fuzzy, c-format msgid "Mount options" msgstr "Опцыі модулю:" #: diskdrake/interactive.pm:937 #, fuzzy, c-format msgid "Various" msgstr "прылада" #: diskdrake/interactive.pm:1002 #, c-format msgid "device" msgstr "прылада" #: diskdrake/interactive.pm:1003 #, c-format msgid "level" msgstr "узровень" #: diskdrake/interactive.pm:1004 #, fuzzy, c-format msgid "chunk size in KiB" msgstr "памер блоку" #: diskdrake/interactive.pm:1021 #, c-format msgid "Be careful: this operation is dangerous." msgstr "Будзьце уважлівы. Гэтую аперацыю нельга адмяніць" #: diskdrake/interactive.pm:1036 #, c-format msgid "What type of partitioning?" msgstr "" #: diskdrake/interactive.pm:1074 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "Каб змяненні ўступілі ў дзеянне, необходна перазагрузіцца" #: diskdrake/interactive.pm:1083 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "Табліца размяшчэння прылады %s будзе запісана на дыск!" #: diskdrake/interactive.pm:1096 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "Усе дадзеные ў раздзеле %s будуць страчаны пасля фарматавання" #: diskdrake/interactive.pm:1112 #, fuzzy, c-format msgid "Move files to the new partition" msgstr "Не хапае прасторы для стварэння новых раздзелаў" #: diskdrake/interactive.pm:1112 #, fuzzy, c-format msgid "Hide files" msgstr "Загрузіць файл(ы)" #: diskdrake/interactive.pm:1113 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" #: diskdrake/interactive.pm:1124 #, fuzzy, c-format msgid "Moving files to the new partition" msgstr "Не хапае прасторы для стварэння новых раздзелаў" #: diskdrake/interactive.pm:1128 #, fuzzy, c-format msgid "Copying %s" msgstr "Копія:" #: diskdrake/interactive.pm:1132 #, fuzzy, c-format msgid "Removing %s" msgstr "Памеры экрану: %s\n" #: diskdrake/interactive.pm:1146 #, c-format msgid "partition %s is now known as %s" msgstr "" #: diskdrake/interactive.pm:1147 #, c-format msgid "Partitions have been renumbered: " msgstr "" #: diskdrake/interactive.pm:1167 diskdrake/interactive.pm:1226 #, c-format msgid "Device: " msgstr "Прылада:" #: diskdrake/interactive.pm:1168 #, fuzzy, c-format msgid "Devfs name: " msgstr "Імя машыны" #: diskdrake/interactive.pm:1169 #, c-format msgid "Volume label: " msgstr "" #: diskdrake/interactive.pm:1170 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "Літара для DOS-дыску: %s (наўгад)\n" #: diskdrake/interactive.pm:1174 diskdrake/interactive.pm:1183 #: diskdrake/interactive.pm:1244 #, c-format msgid "Type: " msgstr "Тып: " #: diskdrake/interactive.pm:1178 install_steps_gtk.pm:296 #, c-format msgid "Name: " msgstr "Імя: " #: diskdrake/interactive.pm:1185 #, c-format msgid "Start: sector %s\n" msgstr "Пачатак: сектар %s\n" #: diskdrake/interactive.pm:1186 #, c-format msgid "Size: %s" msgstr "Памер: %s" #: diskdrake/interactive.pm:1188 #, c-format msgid ", %s sectors" msgstr ", %s сектараў" #: diskdrake/interactive.pm:1190 #, c-format msgid "Cylinder %d to %d\n" msgstr "" #: diskdrake/interactive.pm:1191 #, c-format msgid "Number of logical extents: %d" msgstr "" #: diskdrake/interactive.pm:1192 #, c-format msgid "Formatted\n" msgstr "Фарматаванне\n" #: diskdrake/interactive.pm:1193 #, c-format msgid "Not formatted\n" msgstr "Не адфарматавана\n" #: diskdrake/interactive.pm:1194 #, c-format msgid "Mounted\n" msgstr "Заманціравана\n" #: diskdrake/interactive.pm:1195 #, c-format msgid "RAID %s\n" msgstr "RAID %s\n" #: diskdrake/interactive.pm:1197 #, fuzzy, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "Імя файлу віртуальнай файлавай сістэмы: %s" #: diskdrake/interactive.pm:1198 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Загрузачны раздзел па дамаўленню\n" " (для загрузкі MS-DOS, а не для lilo)\n" #: diskdrake/interactive.pm:1200 #, c-format msgid "Level %s\n" msgstr "Узровень %s\n" #: diskdrake/interactive.pm:1201 #, fuzzy, c-format msgid "Chunk size %d KiB\n" msgstr "Памер фрагменту %s\n" #: diskdrake/interactive.pm:1202 #, c-format msgid "RAID-disks %s\n" msgstr "RAID-дыскі %s\n" #: diskdrake/interactive.pm:1204 #, c-format msgid "Loopback file name: %s" msgstr "Імя файлу віртуальнай файлавай сістэмы: %s" #: diskdrake/interactive.pm:1207 #, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" #: diskdrake/interactive.pm:1210 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" #: diskdrake/interactive.pm:1227 #, c-format msgid "Read-only" msgstr "Толькі для чытаньня" #: diskdrake/interactive.pm:1228 #, c-format msgid "Size: %s\n" msgstr "Памер: %s\n" #: diskdrake/interactive.pm:1229 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Геаметрыя: %s цыліндраў, %s галовак, %s сектараў\n" #: diskdrake/interactive.pm:1230 #, c-format msgid "Info: " msgstr "Інфармацыя: " #: diskdrake/interactive.pm:1231 #, c-format msgid "LVM-disks %s\n" msgstr "LVM-дыскі %s\n" #: diskdrake/interactive.pm:1232 #, c-format msgid "Partition table type: %s\n" msgstr "Тып табліцы раздзелаў: %s\n" #: diskdrake/interactive.pm:1233 #, c-format msgid "on channel %d id %d\n" msgstr "" #: diskdrake/interactive.pm:1265 #, fuzzy, c-format msgid "Filesystem encryption key" msgstr "Тыпы файлавых сістэмаў:" #: diskdrake/interactive.pm:1266 #, c-format msgid "Choose your filesystem encryption key" msgstr "" #: diskdrake/interactive.pm:1269 #, fuzzy, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "" "Гэты пароль занадта просты (яго даўжыня павінна быць не меней за %d літараў)" #: diskdrake/interactive.pm:1270 #, fuzzy, c-format msgid "The encryption keys do not match" msgstr "Паролі не супадаюць" #: diskdrake/interactive.pm:1273 network/netconnect.pm:1136 #: standalone/drakconnect:397 #, c-format msgid "Encryption key" msgstr "" #: diskdrake/interactive.pm:1274 #, c-format msgid "Encryption key (again)" msgstr "" #: diskdrake/removable.pm:46 #, fuzzy, c-format msgid "Change type" msgstr "Змяніць тып раздзелу" #: diskdrake/smbnfs_gtk.pm:163 #, c-format msgid "Can not login using username %s (bad password?)" msgstr "" #: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176 #, fuzzy, c-format msgid "Domain Authentication Required" msgstr "Аўтэнтыфікацыя" #: diskdrake/smbnfs_gtk.pm:168 #, fuzzy, c-format msgid "Which username" msgstr "Імя карыстальніку:" #: diskdrake/smbnfs_gtk.pm:168 #, fuzzy, c-format msgid "Another one" msgstr "Мэнэджэр файлаў" #: diskdrake/smbnfs_gtk.pm:177 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "" #: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3494 #, c-format msgid "Username" msgstr "Карыстальнік" #: diskdrake/smbnfs_gtk.pm:205 #, fuzzy, c-format msgid "Search servers" msgstr "Адшукаць файлы на дыску" #: diskdrake/smbnfs_gtk.pm:210 #, c-format msgid "Search new servers" msgstr "" #: do_pkgs.pm:16 do_pkgs.pm:31 #, fuzzy, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "Зьмяненьні не былі захаваныя. Ці жадаеце працягнуць?" #: do_pkgs.pm:21 do_pkgs.pm:36 #, c-format msgid "Mandatory package %s is missing" msgstr "" #: do_pkgs.pm:172 #, fuzzy, c-format msgid "Installing packages..." msgstr "Усталяванне пакету %s" #: do_pkgs.pm:217 #, fuzzy, c-format msgid "Removing packages..." msgstr "Прагляд даступных пакетаў" #: fs.pm:487 fs.pm:536 #, fuzzy, c-format msgid "Mounting partition %s" msgstr "Фарматаванне раздзелу %s" #: fs.pm:488 fs.pm:537 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "" #: fs.pm:508 fs.pm:515 #, fuzzy, c-format msgid "Checking %s" msgstr "Праверка правапісу" #: fs.pm:553 partition_table.pm:391 #, c-format msgid "error unmounting %s: %s" msgstr "памылка разманціравання %s: %s" #: fs.pm:585 #, fuzzy, c-format msgid "Enabling swap partition %s" msgstr "Фарматаванне раздзелу %s" #: fs/format.pm:44 fs/format.pm:51 #, c-format msgid "Formatting partition %s" msgstr "Фарматаванне раздзелу %s" #: fs/format.pm:48 #, c-format msgid "Creating and formatting file %s" msgstr "Стварэнне і фарматаванне файла %s" #: fs/format.pm:83 #, c-format msgid "I do not know how to format %s in type %s" msgstr "Не ведаю як адфарматаваць %s з тыпам %s" #: fs/format.pm:88 fs/format.pm:90 #, c-format msgid "%s formatting of %s failed" msgstr "%s памылка фарматавання %s" #: fs/mount_options.pm:112 #, c-format msgid "" "Do not update inode access times on this file system\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" #: fs/mount_options.pm:115 #, c-format msgid "" "Can only be mounted explicitly (i.e.,\n" "the -a option will not cause the file system to be mounted)." msgstr "" #: fs/mount_options.pm:118 #, c-format msgid "Do not interpret character or block special devices on the file system." msgstr "" #: fs/mount_options.pm:120 #, c-format msgid "" "Do not allow execution of any binaries on the mounted\n" "file system. This option might be useful for a server that has file systems\n" "containing binaries for architectures other than its own." msgstr "" #: fs/mount_options.pm:124 #, c-format msgid "" "Do not allow set-user-identifier or set-group-identifier\n" "bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" "have suidperl(1) installed.)" msgstr "" #: fs/mount_options.pm:128 #, c-format msgid "Mount the file system read-only." msgstr "" #: fs/mount_options.pm:130 #, c-format msgid "All I/O to the file system should be done synchronously." msgstr "" #: fs/mount_options.pm:134 #, c-format msgid "" "Allow an ordinary user to mount the file system. The\n" "name of the mounting user is written to mtab so that he can unmount the " "file\n" "system again. This option implies the options noexec, nosuid, and nodev\n" "(unless overridden by subsequent options, as in the option line\n" "user,exec,dev,suid )." msgstr "" #: fs/mount_options.pm:142 #, c-format msgid "Give write access to ordinary users" msgstr "" #: fs/mount_options.pm:144 #, c-format msgid "Give read-only access to ordinary users" msgstr "" #: fs/type.pm:370 #, fuzzy, c-format msgid "You can not use JFS for partitions smaller than 16MB" msgstr "Вы не можаце разбіваць на разделы, памер якіх меней за 32 Мб" #: fs/type.pm:371 #, c-format msgid "You can not use ReiserFS for partitions smaller than 32MB" msgstr "Вы не можаце разбіваць на разделы, памер якіх меней за 32 Мб" #: fsedit.pm:25 #, c-format msgid "with /usr" msgstr "" #: fsedit.pm:30 #, c-format msgid "server" msgstr "сэервер" #: fsedit.pm:184 #, c-format msgid "" "I can not read the partition table of device %s, it's too corrupted for me :" "(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to lose all the partitions?\n" msgstr "" #: fsedit.pm:401 #, c-format msgid "Mount points must begin with a leading /" msgstr "Пункт манціравання павінен пачынацца з /" #: fsedit.pm:402 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "" #: fsedit.pm:403 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "Ужо ёсць раздзел з пунктам манціравання %s\n" #: fsedit.pm:405 #, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" #: fsedit.pm:408 #, c-format msgid "You can not use a LVM Logical Volume for mount point %s" msgstr "" #: fsedit.pm:410 #, c-format msgid "" "You've selected a LVM Logical Volume as root (/).\n" "The bootloader is not able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" #: fsedit.pm:413 #, c-format msgid "" "You may not be able to install lilo (since lilo does not handle a LV on " "multiple PVs)" msgstr "" #: fsedit.pm:416 fsedit.pm:418 #, c-format msgid "This directory should remain within the root filesystem" msgstr "Гэты каталог павінен знаходзіцца ўнутры каранёвай файлавай сістэмы" #: fsedit.pm:420 fsedit.pm:422 #, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" #: fsedit.pm:424 #, c-format msgid "You can not use an encrypted file system for mount point %s" msgstr "" #: fsedit.pm:485 #, fuzzy, c-format msgid "Not enough free space for auto-allocating" msgstr "Не хапае прасторы для стварэння новых раздзелаў" #: fsedit.pm:487 #, fuzzy, c-format msgid "Nothing to do" msgstr "Нічога" #: harddrake/data.pm:61 install_any.pm:1505 #, c-format msgid "Floppy" msgstr "Гнуткі дыск" #: harddrake/data.pm:71 #, c-format msgid "Zip" msgstr "" #: harddrake/data.pm:81 install_any.pm:1506 #, c-format msgid "Hard Disk" msgstr "Жорскі дыск" #: harddrake/data.pm:90 install_any.pm:1507 #, c-format msgid "CDROM" msgstr "" #: harddrake/data.pm:100 #, fuzzy, c-format msgid "CD/DVD burners" msgstr "CDDB сервакі" #: harddrake/data.pm:110 #, c-format msgid "DVD-ROM" msgstr "" #: harddrake/data.pm:120 standalone/drakbackup:2051 #, fuzzy, c-format msgid "Tape" msgstr "Тып" #: harddrake/data.pm:129 #, fuzzy, c-format msgid "Videocard" msgstr "Відэа" #: harddrake/data.pm:139 #, c-format msgid "Tvcard" msgstr "" #: harddrake/data.pm:148 #, fuzzy, c-format msgid "Other MultiMedia devices" msgstr "Мульцімедыя" #: harddrake/data.pm:157 #, fuzzy, c-format msgid "Soundcard" msgstr "Гук" #: harddrake/data.pm:166 #, c-format msgid "Webcam" msgstr "" #: harddrake/data.pm:180 #, fuzzy, c-format msgid "Processors" msgstr "Працэсар" #: harddrake/data.pm:190 #, c-format msgid "ISDN adapters" msgstr "" #: harddrake/data.pm:200 #, fuzzy, c-format msgid "Ethernetcard" msgstr "Іншае" #: harddrake/data.pm:218 network/netconnect.pm:518 #, c-format msgid "Modem" msgstr "Мадэм" #: harddrake/data.pm:228 #, c-format msgid "ADSL adapters" msgstr "" #: harddrake/data.pm:242 #, c-format msgid "Memory" msgstr "Памяць" #: harddrake/data.pm:251 #, c-format msgid "AGP controllers" msgstr "" #: harddrake/data.pm:260 help.pm:186 help.pm:855 #: install_steps_interactive.pm:978 #, c-format msgid "Printer" msgstr "Прынтэр" #: harddrake/data.pm:270 #, c-format msgid "Joystick" msgstr "Джойсьцік" #: harddrake/data.pm:280 #, c-format msgid "(E)IDE/ATA controllers" msgstr "" #: harddrake/data.pm:289 #, fuzzy, c-format msgid "SATA controllers" msgstr "Кіраванне" #: harddrake/data.pm:298 #, c-format msgid "Firewire controllers" msgstr "" #: harddrake/data.pm:307 #, fuzzy, c-format msgid "PCMCIA controllers" msgstr "Кіраванне" #: harddrake/data.pm:316 #, fuzzy, c-format msgid "SCSI controllers" msgstr "Кіраванне" #: harddrake/data.pm:325 #, c-format msgid "USB controllers" msgstr "" #: harddrake/data.pm:334 #, fuzzy, c-format msgid "USB ports" msgstr "USB прылады" #: harddrake/data.pm:343 #, c-format msgid "SMBus controllers" msgstr "" #: harddrake/data.pm:352 #, c-format msgid "Bridges and system controllers" msgstr "" #: harddrake/data.pm:361 #, fuzzy, c-format msgid "UPS" msgstr "HFS" #: harddrake/data.pm:370 help.pm:855 install_steps_interactive.pm:118 #: install_steps_interactive.pm:938 standalone/keyboarddrake:28 #, c-format msgid "Keyboard" msgstr "Клавіятура" #: harddrake/data.pm:383 help.pm:855 install_steps_interactive.pm:971 #, c-format msgid "Mouse" msgstr "Мыш" #: harddrake/data.pm:397 #, fuzzy, c-format msgid "Scanner" msgstr "Прайгравальнік дыскаў" #: harddrake/data.pm:407 standalone/harddrake2:439 #, c-format msgid "Unknown/Others" msgstr "" #: harddrake/data.pm:435 #, c-format msgid "cpu # " msgstr "" #: harddrake/sound.pm:191 standalone/drakconnect:169 #: standalone/drakconnect:615 #, fuzzy, c-format msgid "Please Wait... Applying the configuration" msgstr "Праверка параметраў настройкі" #: harddrake/sound.pm:227 #, fuzzy, c-format msgid "No alternative driver" msgstr "Выкарыстаць альтэрнатыўную прыладу" #: harddrake/sound.pm:228 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" #: harddrake/sound.pm:234 #, fuzzy, c-format msgid "Sound configuration" msgstr "Настройка драйверу Sun" #: harddrake/sound.pm:236 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" #. -PO: here the first %s is either "OSS" or "ALSA", #. -PO: the second %s is the name of the current driver #. -PO: and the third %s is the name of the default driver #: harddrake/sound.pm:241 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" #: harddrake/sound.pm:243 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent " "sound API (it's available on most UNIX(tm) systems) but it's a very basic " "and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" #: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146 #, fuzzy, c-format msgid "Driver:" msgstr "Прылада %d" #: harddrake/sound.pm:262 #, fuzzy, c-format msgid "Trouble shooting" msgstr "Настройкі мышы" #: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1039 #: network/netconnect.pm:504 printer/printerdrake.pm:1142 #: printer/printerdrake.pm:2142 printer/printerdrake.pm:2228 #: printer/printerdrake.pm:2274 printer/printerdrake.pm:2341 #: printer/printerdrake.pm:2376 printer/printerdrake.pm:2684 #: printer/printerdrake.pm:2691 printer/printerdrake.pm:3643 #: printer/printerdrake.pm:3970 printer/printerdrake.pm:4092 #: printer/printerdrake.pm:5183 standalone/drakTermServ:325 #: standalone/drakTermServ:1111 standalone/drakTermServ:1172 #: standalone/drakTermServ:1821 standalone/drakbackup:510 #: standalone/drakbackup:609 standalone/drakboot:165 standalone/drakclock:224 #: standalone/drakconnect:971 standalone/drakfloppy:291 standalone/drakups:27 #: standalone/scannerdrake:51 standalone/scannerdrake:940 #, c-format msgid "Warning" msgstr "Увага!" #: harddrake/sound.pm:270 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver will only be used on next bootstrap." msgstr "" #: harddrake/sound.pm:278 #, c-format msgid "No open source driver" msgstr "" #: harddrake/sound.pm:279 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "" #: harddrake/sound.pm:282 #, c-format msgid "No known driver" msgstr "" #: harddrake/sound.pm:283 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "" #: harddrake/sound.pm:287 #, fuzzy, c-format msgid "Unknown driver" msgstr "Невядомая гукавая карта" #: harddrake/sound.pm:288 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "" #: harddrake/sound.pm:302 #, c-format msgid "Sound trouble shooting" msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:305 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" #: harddrake/sound.pm:331 #, c-format msgid "Let me pick any driver" msgstr "" #: harddrake/sound.pm:334 #, c-format msgid "Choosing an arbitrary driver" msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:337 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" #: harddrake/v4l.pm:14 #, fuzzy, c-format msgid "Auto-detect" msgstr "Аўтаматычнае вызначэнне" #: harddrake/v4l.pm:72 harddrake/v4l.pm:235 #, fuzzy, c-format msgid "Unknown|Generic" msgstr "Агульны" #: harddrake/v4l.pm:105 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "" #: harddrake/v4l.pm:106 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "" #: harddrake/v4l.pm:309 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" #: harddrake/v4l.pm:312 #, fuzzy, c-format msgid "Card model:" msgstr "Рэжым прайгравання" #: harddrake/v4l.pm:313 #, fuzzy, c-format msgid "Tuner type:" msgstr "Тып мышы: %s\n" #: harddrake/v4l.pm:314 #, c-format msgid "Number of capture buffers:" msgstr "" #: harddrake/v4l.pm:314 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "" #: harddrake/v4l.pm:316 #, fuzzy, c-format msgid "PLL setting:" msgstr "Настройкі шрыфтоў" #: harddrake/v4l.pm:317 #, c-format msgid "Radio support:" msgstr "" #: harddrake/v4l.pm:317 #, c-format msgid "enable radio support" msgstr "" #: help.pm:11 #, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandrakelinux distribution. If you agree with all the\n" "terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n" "button will reboot your computer." msgstr "" #: help.pm:14 install_steps_gtk.pm:552 install_steps_interactive.pm:92 #: install_steps_interactive.pm:731 standalone/drakautoinst:216 #, c-format msgid "Accept" msgstr "Прыняць" #: help.pm:17 #, c-format msgid "" "GNU/Linux is a multi-user system which means each user can have his or her\n" "own preferences, own files and so on. But unlike \"root\", who is the\n" "system administrator, the users you add at this point will not be " "authorized\n" "to change anything except their own files and their own configurations,\n" "protecting the system from unintentional or malicious changes which could\n" "impact on the system as a whole. You'll have to create at least one regular\n" "user for yourself -- this is the account which you should use for routine,\n" "day-to-day usage. Although it's very easy to log in as \"root\" to do\n" "anything and everything, it may also be very dangerous! A very simple\n" "mistake could mean that your system will not work any more. If you make a\n" "serious mistake as a regular user, the worst that can happen is that you'll\n" "lose some information, but you will not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you type in this field and copy it to the \"%s\" one, which is the name\n" "this user will enter to log onto the system. If you like, you may override\n" "the default and change the user name. The next step is to enter a password.\n" "From a security point of view, a non-privileged (regular) user password is\n" "not as crucial as the \"root\" password, but that's no reason to neglect it\n" "by making it blank or too simple: after all, your files could be the ones\n" "at risk.\n" "\n" "Once you click on \"%s\", you can add other users. Add a user for each one\n" "of your friends, your father, your sister, etc. Click \"%s\" when you're\n" "finished adding users.\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\" for\n" "that user (bash by default).\n" "\n" "When you're finished adding users, you'll be asked to choose a user who\n" "will be automatically logged into the system when the computer boots up. If\n" "you're interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click on\n" "\"%s\". If you're not interested in this feature, uncheck the \"%s\" box." msgstr "" #: help.pm:51 printer/printerdrake.pm:1595 printer/printerdrake.pm:1715 #, c-format msgid "User name" msgstr "Імя карыстальніку:" #: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:233 #: install_steps_gtk.pm:689 interactive.pm:424 interactive/newt.pm:317 #: network/netconnect.pm:278 network/tools.pm:182 printer/printerdrake.pm:3581 #: standalone/drakTermServ:382 standalone/drakbackup:3946 #: standalone/drakbackup:4040 standalone/drakbackup:4057 #: standalone/drakbackup:4075 ugtk2.pm:506 #, c-format msgid "Next" msgstr "Далей" #: help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722 #: interactive.pm:385 #, c-format msgid "Advanced" msgstr "Адмысловае" #: help.pm:54 #, c-format msgid "" "Listed here are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" #: help.pm:85 #, c-format msgid "" "The Mandrakelinux installation is distributed on several CD-ROMs. If a\n" "selected package is located on another CD-ROM, DrakX will eject the current\n" "CD and ask you to insert the required one. If you do not have the requested\n" "CD at hand, just click on \"%s\", the corresponding packages will not be\n" "installed." msgstr "" #: help.pm:92 #, c-format msgid "" "It's now time to specify which programs you wish to install on your system.\n" "There are thousands of packages available for Mandrakelinux, and to make it\n" "simpler to manage, they have been placed into groups of similar\n" "applications.\n" "\n" "Mandrakelinux sorts package groups in four categories. You can mix and\n" "match applications from the various categories, so a ``Workstation''\n" "installation can still have applications from the ``Server'' category\n" "installed.\n" "\n" " * \"%s\": if you plan to use your machine as a workstation, select one or\n" "more of the groups in the workstation category.\n" "\n" " * \"%s\": if you plan on using your machine for programming, select the\n" "appropriate groups from that category. The special \"LSB\" group will\n" "configure your system so that it complies as much as possible with the\n" "Linux Standard Base specifications.\n" "\n" " Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n" "instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n" "of the system. However, if you do not select the \"LSB\" group you will\n" "still have a system which is nearly 100%% LSB-compliant.\n" "\n" " * \"%s\": if your machine is intended to be a server, select which of the\n" "more common services you wish to install on your machine.\n" "\n" " * \"%s\": this is where you will choose your preferred graphical\n" "environment. At least one must be selected if you want to have a graphical\n" "interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group.\n" "\n" "You can check the \"%s\" box, which is useful if you're familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" "\n" "If you start the installation in \"%s\" mode, you can deselect all groups\n" "and prevent the installation of any new packages. This is useful for\n" "repairing or updating an existing system.\n" "\n" "If you deselect all groups when performing a regular installation (as\n" "opposed to an upgrade), a dialog will pop up suggesting different options\n" "for a minimal installation:\n" "\n" " * \"%s\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"%s\": installs the base system plus basic utilities and their\n" "documentation. This installation is suitable for setting up a server.\n" "\n" " * \"%s\": will install the absolute minimum number of packages necessary\n" "to get a working Linux system. With this installation you will only have a\n" "command-line interface. The total size of this installation is about 65\n" "megabytes." msgstr "" #: help.pm:146 share/compssUsers.pl:23 #, fuzzy, c-format msgid "Workstation" msgstr "Канфігурацыя" #: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162 #: share/compssUsers.pl:164 #, c-format msgid "Development" msgstr "Распрацоўка" #: help.pm:146 share/compssUsers.pl:144 #, fuzzy, c-format msgid "Graphical Environment" msgstr "Абалонка" #: help.pm:146 install_steps_gtk.pm:231 install_steps_interactive.pm:642 #, c-format msgid "Individual package selection" msgstr "Асабісты выбар пакетаў" #: help.pm:146 help.pm:588 #, fuzzy, c-format msgid "Upgrade" msgstr "Аркады" #: help.pm:146 install_steps_interactive.pm:600 #, c-format msgid "With X" msgstr "" #: help.pm:146 #, fuzzy, c-format msgid "With basic documentation" msgstr "Аўтэнтыфікацыя" #: help.pm:146 #, c-format msgid "Truly minimal install" msgstr "" #: help.pm:149 #, c-format msgid "" "If you choose to install packages individually, the installer will present\n" "a tree containing all packages classified by groups and subgroups. While\n" "browsing the tree, you can select entire groups, subgroups, or individual\n" "packages.\n" "\n" "Whenever you select a package on the tree, a description will appear on the\n" "right to let you know the purpose of that package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you'll be asked to confirm that you really want those servers to be\n" "installed. By default Mandrakelinux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that\n" "security holes were discovered after this version of Mandrakelinux was\n" "finalized. If you do not know what a particular service is supposed to do " "or\n" "why it's being installed, then click \"%s\". Clicking \"%s\" will install\n" "the listed services and they will be started automatically at boot time. !!\n" "\n" "The \"%s\" option is used to disable the warning dialog which appears\n" "whenever the installer automatically selects a package to resolve a\n" "dependency issue. Some packages depend on others and the installation of\n" "one particular package may require the installation of another package. The\n" "installer can determine which packages are required to satisfy a dependency\n" "to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert the floppy disk created at the end of\n" "another installation. See the second tip of the last step on how to create\n" "such a floppy." msgstr "" #: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:792 #: interactive.pm:149 modules/interactive.pm:71 standalone/drakbackup:2508 #: standalone/draksec:54 standalone/harddrake2:306 standalone/net_applet:255 #: ugtk2.pm:899 wizards.pm:156 #, c-format msgid "No" msgstr "Не" #: help.pm:180 help.pm:285 help.pm:444 install_any.pm:792 interactive.pm:149 #: modules/interactive.pm:71 printer/printerdrake.pm:736 #: standalone/drakbackup:2508 standalone/drakgw:287 standalone/drakgw:288 #: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55 #: standalone/harddrake2:305 standalone/net_applet:259 ugtk2.pm:899 #: wizards.pm:156 #, c-format msgid "Yes" msgstr "Так" #: help.pm:180 #, fuzzy, c-format msgid "Automatic dependencies" msgstr "Аўтаматычнае вызначэнне" #: help.pm:183 #, c-format msgid "" "\"%s\": clicking on the \"%s\" button will open the printer configuration\n" "wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" "information on how to set up a new printer. The interface presented in our\n" "manual is similar to the one used during installation." msgstr "" #: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:607 #: standalone/drakbackup:2333 standalone/drakbackup:2337 #: standalone/drakbackup:2341 standalone/drakbackup:2345 #, c-format msgid "Configure" msgstr "Настройка" #: help.pm:189 #, c-format msgid "" "This dialog is used to select which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all services available on the current installation. Review\n" "each one of them carefully and uncheck those which are not needed at boot\n" "time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you're not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you probably do not want to start any services which you do not " "need.\n" "Please remember that some services can be dangerous if they're enabled on a\n" "server. In general, select only those services you really need. !!" msgstr "" #: help.pm:206 #, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"%s\", which will let GNU/Linux know that the system clock and the\n" "hardware clock are in the same time zone. This is useful when the machine\n" "also hosts another operating system.\n" "\n" "The \"%s\" option will automatically regulate the system clock by\n" "connecting to a remote time server on the Internet. For this feature to\n" "work, you must have a working Internet connection. We recommend that you\n" "choose a time server located near you. This option actually installs a time\n" "server which can be used by other machines on your local network as well." msgstr "" #: help.pm:217 install_steps_interactive.pm:873 #, fuzzy, c-format msgid "Hardware clock set to GMT" msgstr "Ваш сістэмны гадзіннік усталяваны на GMT?" #: help.pm:217 #, fuzzy, c-format msgid "Automatic time synchronization" msgstr "Аўтаматычнае вызначэнне" #: help.pm:220 #, c-format msgid "" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs." msgstr "" #: help.pm:231 #, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrakelinux rely upon.\n" "\n" "You'll see a list of different parameters to change to get an optimal\n" "graphical display.\n" "\n" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer.\n" "\n" "\n" "\n" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture.\n" "\n" "\n" "\n" "Test\n" "\n" " Depending on your hardware, this entry might not appear.\n" "\n" " The system will try to open a graphical screen at the desired\n" "resolution. If you see the test message during the test and answer \"%s\",\n" "then DrakX will proceed to the next step. If you do not see it, then it\n" "means that some part of the auto-detected configuration was incorrect and\n" "the test will automatically end after 12 seconds and return you to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" #: help.pm:288 #, c-format msgid "" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer." msgstr "" #: help.pm:295 #, c-format msgid "" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture." msgstr "" #: help.pm:303 #, c-format msgid "" "In the situation where different servers are available for your card, with\n" "or without 3D acceleration, you're asked to choose the server which best\n" "suits your needs." msgstr "" #: help.pm:308 #, c-format msgid "" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" #: help.pm:316 #, c-format msgid "" "You now need to decide where you want to install the Mandrakelinux\n" "operating system on your hard drive. If your hard drive is empty or if an\n" "existing operating system is using all the available space you will have to\n" "partition the drive. Basically, partitioning a hard drive means to\n" "logically divide it to create the space needed to install your new\n" "Mandrakelinux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to data losses, partitioning can be intimidating and stressful\n" "for the inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on the configuration of your hard drive, several options are\n" "available:\n" "\n" " * \"%s\". This option will perform an automatic partitioning of your blank\n" "drive(s). If you use this option there will be no further prompts.\n" "\n" " * \"%s\". The wizard has detected one or more existing Linux partitions on\n" "your hard drive. If you want to use them, choose this option. You will then\n" "be asked to choose the mount points associated with each of the partitions.\n" "The legacy mount points are selected by default, and for the most part it's\n" "a good idea to keep them.\n" "\n" " * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n" "all the space available on it, you will have to create free space for\n" "GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n" "data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n" "FAT or NTFS partition. Resizing can be performed without the loss of any\n" "data, provided you've previously defragmented the Windows partition.\n" "Backing up your data is strongly recommended. Using this option is\n" "recommended if you want to use both Mandrakelinux and Microsoft Windows on\n" "the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "than when you started. You'll have less free space under Microsoft Windows\n" "to store your data or to install new software.\n" "\n" " * \"%s\". If you want to delete all data and all partitions present on\n" "your hard drive and replace them with your new Mandrakelinux system, choose\n" "this option. Be careful, because you will not be able to undo this " "operation\n" "after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"%s\". This option appears when the hard drive is entirely taken by\n" "Microsoft Windows. Choosing this option will simply erase everything on the\n" "drive and begin fresh, partitioning everything from scratch.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"%s\". Choose this option if you want to manually partition your hard\n" "drive. Be careful -- it is a powerful but dangerous choice and you can very\n" "easily lose all your data. That's why this option is really only\n" "recommended if you have done something like this before and have some\n" "experience. For more instructions on how to use the DiskDrake utility,\n" "refer to the ``Managing Your Partitions'' section in the ``Starter Guide''." msgstr "" #: help.pm:374 install_interactive.pm:95 #, c-format msgid "Use free space" msgstr "Выкарыстоўваць незанятую прастору" #: help.pm:374 #, fuzzy, c-format msgid "Use existing partition" msgstr "Выкарыстоўваць існуючы раздзел" #: help.pm:374 install_interactive.pm:137 #, c-format msgid "Use the free space on the Windows partition" msgstr "Выкарыстоўваць незанятую прастору на раздзеле Windows" #: help.pm:374 install_interactive.pm:213 #, c-format msgid "Erase entire disk" msgstr "Сцёрці дадзеныя на ўсім дыску" #: help.pm:374 #, fuzzy, c-format msgid "Remove Windows" msgstr "Выдаліць Windows™" #: help.pm:374 install_interactive.pm:228 #, c-format msgid "Custom disk partitioning" msgstr "" #: help.pm:377 #, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n" "to remove the installation media (CD-ROM or floppy). The first thing you\n" "should see after your computer has finished doing its hardware tests is the\n" "boot-loader menu, giving you the choice of which operating system to start.\n" "\n" "The \"%s\" button shows two more buttons to:\n" "\n" " * \"%s\": enables you to create an installation floppy disk which will\n" "automatically perform a whole installation without the help of an operator,\n" "similar to the installation you've just configured.\n" "\n" " Note that two different options are available after clicking on that\n" "button:\n" "\n" " * \"%s\". This is a partially automated installation. The partitioning\n" "step is the only interactive procedure.\n" "\n" " * \"%s\". Fully automated installation: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing on a number of similar\n" "machines. See the Auto install section on our web site for more\n" "information.\n" "\n" " * \"%s\"(*): saves a list of the packages selected in this installation.\n" "To use this selection with another installation, insert the floppy and\n" "start the installation. At the prompt, press the [F1] key, type >>linux\n" "defcfg=\"floppy\"<< and press the [Enter] key.\n" "\n" "(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n" "\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n" "/dev/fd0\"." msgstr "" #: help.pm:409 #, fuzzy, c-format msgid "Generate auto-install floppy" msgstr "Стварэнне дыскеты для ўсталявання" #: help.pm:409 install_steps_interactive.pm:1328 #, fuzzy, c-format msgid "Replay" msgstr "Граць" #: help.pm:409 install_steps_interactive.pm:1328 #, c-format msgid "Automated" msgstr "Аўтаматычны" #: help.pm:409 install_steps_interactive.pm:1331 #, fuzzy, c-format msgid "Save packages selection" msgstr "Асабісты выбар пакетаў" #: help.pm:412 #, c-format msgid "" "If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n" "reformat some of them and erase any data they contain. To do so, please\n" "select those partitions as well.\n" "\n" "Please note that it's not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to " "reformat\n" "partitions containing data that you wish to keep (typically \"/home\").\n" "\n" "Please be careful when selecting partitions. After the formatting is\n" "completed, all data on the selected partitions will be deleted and you\n" "will not be able to recover it.\n" "\n" "Click on \"%s\" when you're ready to format the partitions.\n" "\n" "Click on \"%s\" if you want to choose another partition for your new\n" "Mandrakelinux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions which will be checked for\n" "bad blocks on the disk." msgstr "" #: help.pm:431 install_steps_gtk.pm:388 interactive.pm:425 #: interactive/newt.pm:316 printer/printerdrake.pm:3579 #: standalone/drakTermServ:361 standalone/drakbackup:3906 #: standalone/drakbackup:3945 standalone/drakbackup:4056 #: standalone/drakbackup:4071 ugtk2.pm:504 #, c-format msgid "Previous" msgstr "прылада" #: help.pm:434 #, c-format msgid "" "By the time you install Mandrakelinux, it's likely that some packages will\n" "have been updated since the initial release. Bugs may have been fixed,\n" "security issues resolved. To allow you to benefit from these updates,\n" "you're now able to download them from the Internet. Check \"%s\" if you\n" "have a working Internet connection, or \"%s\" if you prefer to install\n" "updated packages later.\n" "\n" "Choosing \"%s\" will display a list of web locations from which updates can\n" "be retrieved. You should choose one near to you. A package-selection tree\n" "will appear: review the selection, and press \"%s\" to retrieve and install\n" "the selected package(s), or \"%s\" to abort." msgstr "" #: help.pm:444 help.pm:588 install_steps_gtk.pm:387 #: install_steps_interactive.pm:156 standalone/drakbackup:4103 #, c-format msgid "Install" msgstr "Усталёўка" #: help.pm:447 #, c-format msgid "" "At this point, DrakX will allow you to choose the security level you desire\n" "for your machine. As a rule of thumb, the security level should be set\n" "higher if the machine is to contain crucial data, or if it's to be directly\n" "exposed to the Internet. The trade-off that a higher security level is\n" "generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, keep the default option. You'll be able\n" "to change it later with the draksec tool, which is part of Mandrakelinux\n" "Control Center.\n" "\n" "Fill the \"%s\" field with the e-mail address of the person responsible for\n" "security. Security messages will be sent to that address." msgstr "" #: help.pm:458 #, fuzzy, c-format msgid "Security Administrator" msgstr "Сістэмнае адміністраваньне" #: help.pm:461 #, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrakelinux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or by another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"%s\": this option deletes all partitions on the selected hard drive\n" "\n" " * \"%s\": this option enables you to automatically create ext3 and swap\n" "partitions in the free space of your hard drive\n" "\n" "\"%s\": gives access to additional features:\n" "\n" " * \"%s\": saves the partition table to a floppy. Useful for later\n" "partition-table recovery if necessary. It is strongly recommended that you\n" "perform this step.\n" "\n" " * \"%s\": allows you to restore a previously saved partition table from a\n" "floppy disk.\n" "\n" " * \"%s\": if your partition table is damaged, you can try to recover it\n" "using this option. Please be careful and remember that it does not always\n" "work.\n" "\n" " * \"%s\": discards all changes and reloads the partition table that was\n" "originally on the hard drive.\n" "\n" " * \"%s\": un-checking this option will force users to manually mount and\n" "unmount removable media such as floppies and CD-ROMs.\n" "\n" " * \"%s\": use this option if you wish to use a wizard to partition your\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": use this option to cancel your changes.\n" "\n" " * \"%s\": allows additional actions on partitions (type, options, format)\n" "and gives more information about the hard drive.\n" "\n" " * \"%s\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" #: help.pm:530 #, c-format msgid "Removable media auto-mounting" msgstr "" #: help.pm:530 #, fuzzy, c-format msgid "Toggle between normal/expert mode" msgstr "Звычайны рэжым" #: help.pm:533 #, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one which you want to resize in order to install your new\n" "Mandrakelinux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" #: help.pm:564 #, c-format msgid "" "\"%s\": check the current country selection. If you're not in this country,\n" "click on the \"%s\" button and choose another. If your country is not in " "the\n" "list shown, click on the \"%s\" button to get the complete country list." msgstr "" #: help.pm:569 #, c-format msgid "" "This step is activated only if an existing GNU/Linux partition has been\n" "found on your machine.\n" "\n" "DrakX now needs to know if you want to perform a new installation or an\n" "upgrade of an existing Mandrakelinux system:\n" "\n" " * \"%s\". For the most part, this completely wipes out the old system.\n" "However, depending on your partitioning scheme, you can prevent some of\n" "your existing data (notably \"home\" directories) from being over-written.\n" "If you wish to change how your hard drives are partitioned, or to change\n" "the file system, you should use this option.\n" "\n" " * \"%s\". This installation class allows you to update the packages\n" "currently installed on your Mandrakelinux system. Your current partitioning\n" "scheme and user data will not be altered. Most of the other configuration\n" "steps remain available and are similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandrakelinux systems\n" "running version \"8.1\" or later. Performing an upgrade on versions prior\n" "to Mandrakelinux version \"8.1\" is not recommended." msgstr "" #: help.pm:591 #, c-format msgid "" "Depending on the language you chose (), DrakX will automatically select a\n" "particular type of keyboard configuration. Check that the selection suits\n" "you or choose another keyboard layout.\n" "\n" "Also, you may not have a keyboard which corresponds exactly to your\n" "language: for example, if you are an English-speaking Swiss native, you may\n" "have a Swiss keyboard. Or if you speak English and are located in Quebec,\n" "you may find yourself in the same situation where your native language and\n" "country-set keyboard do not match. In either case, this installation step\n" "will allow you to select an appropriate keyboard from a list.\n" "\n" "Click on the \"%s\" button to be shown a list of supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding which will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" #: help.pm:609 #, c-format msgid "" "The first step is to choose your preferred language.\n" "\n" "Your choice of preferred language will affect the installer, the\n" "documentation, and the system in general. First select the region you're\n" "located in, then the language you speak.\n" "\n" "Clicking on the \"%s\" button will allow you to select other languages to\n" "be installed on your workstation, thereby installing the language-specific\n" "files for system documentation and applications. For example, if Spanish\n" "users are to use your machine, select English as the default language in\n" "the tree view and \"%s\" in the Advanced section.\n" "\n" "About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n" "cover all existing languages. However full support for it in GNU/Linux is\n" "still under development. For that reason, Mandrakelinux's use of UTF-8 will\n" "depend on the user's choices:\n" "\n" " * If you choose a language with a strong legacy encoding (latin1\n" "languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n" "iso-8859-2 languages), the legacy encoding will be used by default;\n" "\n" " * Other languages will use unicode by default;\n" "\n" " * If two or more languages are required, and those languages are not using\n" "the same encoding, then unicode will be used for the whole system;\n" "\n" " * Finally, unicode can also be forced for use throughout the system at a\n" "user's request by selecting the \"%s\" option independently of which\n" "languages were been chosen.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several, or even install them all by selecting the \"%s\" box.\n" "Selecting support for a language means translations, fonts, spell checkers,\n" "etc. will also be installed for that language.\n" "\n" "To switch between the various languages installed on your system, you can\n" "launch the \"localedrake\" command as \"root\" to change the language used\n" "by the entire system. Running the command as a regular user will only\n" "change the language settings for that particular user." msgstr "" #: help.pm:647 #, fuzzy, c-format msgid "Espanol" msgstr "Эсперанто:" #: help.pm:650 #, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be obtained by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n" "mouse. DrakX will then configure your mouse so that you can simulate the\n" "wheel with it: to do so, press the middle button and move your mouse\n" "pointer up and down.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the list provided.\n" "\n" "You can select the \"%s\" entry to chose a ``generic'' mouse type which\n" "will work with nearly all mice.\n" "\n" "If you choose a mouse other than the default one, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and\n" "you will be returned to the mouse list.\n" "\n" "Occasionally wheel mice are not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"%s\" button, a mouse image will be displayed on-screen.\n" "Scroll the mouse wheel to ensure that it is activating correctly. As you\n" "scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n" "Test the buttons and check that the mouse pointer moves on-screen as you\n" "move your mouse about." msgstr "" #: help.pm:681 #, c-format msgid "with Wheel emulation" msgstr "" #: help.pm:681 #, c-format msgid "Universal | Any PS/2 & USB mice" msgstr "" #: help.pm:684 #, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" #: help.pm:688 #, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you must enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only user authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That's why you must choose a password which is difficult to\n" "guess: DrakX will tell you if the password you chose is too simple. As you\n" "can see, you're not forced to enter a password, but we strongly advise\n" "against this. GNU/Linux is just as prone to operator error as any other\n" "operating system. Since \"root\" can overcome all limitations and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves, it is important that it be difficult to become\n" "\"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it far\n" "too easy to compromise your system.\n" "\n" "One caveat: do not make the password too long or too complicated because " "you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it. To reduce the\n" "chance of a blind typing error you'll need to enter the password twice. If\n" "you do happen to make the same typing error twice, you'll have to use this\n" "``incorrect'' password the first time you'll try to connect as \"root\".\n" "\n" "If you want an authentication server to control access to your computer,\n" "click on the \"%s\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one for \"%s\". If you do not know which\n" "one to use, you should ask your network administrator.\n" "\n" "If you happen to have problems with remembering passwords, or if your\n" "computer will never be connected to the Internet and you absolutely trust\n" "everybody who uses your computer, you can choose to have \"%s\"." msgstr "" #: help.pm:722 #, fuzzy, c-format msgid "authentication" msgstr "Аўтэнтыфікацыя" #: help.pm:725 #, c-format msgid "" "A boot loader is a little program which is started by the computer at boot\n" "time. It's responsible for starting up the whole system. Normally, the boot\n" "loader installation is totally automated. DrakX will analyze the disk boot\n" "sector and act according to what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n" "boot sector. This way you'll be able to load either GNU/Linux or any other\n" "OS installed on your machine.\n" "\n" " * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n" "\n" "If DrakX can not determine where to place the boot sector, it'll ask you\n" "where it should place it. Generally, the \"%s\" is the safest place.\n" "Choosing \"%s\" will not install any boot loader. Use this option only if " "you\n" "know what you're doing." msgstr "" #: help.pm:742 #, c-format msgid "" "Now, it's time to select a printing system for your computer. Other\n" "operating systems may offer you one, but Mandrakelinux offers two. Each of\n" "the printing systems is best suited to particular types of configuration.\n" "\n" " * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"%s\"\n" "will handle only very simple network cases and is somewhat slow when used\n" "within networks.) It's recommended that you use \"pdq\" if this is your\n" "first experience with GNU/Linux.\n" "\n" " * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n" "choice for printing to your local printer or to one halfway around the\n" "planet. It's simple to configure and can act as a server or a client for\n" "the ancient \"lpd\" printing system, so it's compatible with older\n" "operating systems which may still need print services. While quite\n" "powerful, the basic setup is almost as easy as \"pdq\". If you need to\n" "emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n" "\"%s\" includes graphical front-ends for printing or choosing printer\n" "options and for managing the printer.\n" "\n" "If you make a choice now, and later find that you do not like your printing\n" "system you may change it by running PrinterDrake from the Mandrakelinux\n" "Control Center and clicking on the \"%s\" button." msgstr "" #: help.pm:765 #, c-format msgid "pdq" msgstr "" #: help.pm:765 printer/cups.pm:115 printer/data.pm:118 #, c-format msgid "CUPS" msgstr "" #: help.pm:765 #, fuzzy, c-format msgid "Expert" msgstr "/Графік" #: help.pm:768 #, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, you'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" #: help.pm:786 #, c-format msgid "" "\"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card is not the one actually present on your\n" "system, you can click on the button and choose a different driver." msgstr "" #: help.pm:788 help.pm:855 install_steps_interactive.pm:1005 #: install_steps_interactive.pm:1022 #, fuzzy, c-format msgid "Sound card" msgstr "Праграма гуказапісу" #: help.pm:791 #, c-format msgid "" "As a review, DrakX will present a summary of information it has gathered\n" "about your system. Depending on the hardware installed on your machine, you\n" "may have some or all of the following entries. Each entry is made up of the\n" "hardware item to be configured, followed by a quick summary of the current\n" "configuration. Click on the corresponding \"%s\" button to make the change.\n" "\n" " * \"%s\": check the current keyboard map configuration and change it if\n" "necessary.\n" "\n" " * \"%s\": check the current country selection. If you're not in this\n" "country, click on the \"%s\" button and choose another. If your country\n" "is not in the list shown, click on the \"%s\" button to get the complete\n" "country list.\n" "\n" " * \"%s\": by default, DrakX deduces your time zone based on the country\n" "you have chosen. You can click on the \"%s\" button here if this is not\n" "correct.\n" "\n" " * \"%s\": verify the current mouse configuration and click on the button\n" "to change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to set up a new printer. The interface\n" "presented in our manual is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card is not the one actually present on your\n" "system, you can click on the button and choose a different driver.\n" "\n" " * \"%s\": if you have a TV card, this is where information about its\n" "configuration will be displayed. If you have a TV card and it is not\n" "detected, click on \"%s\" to try to configure it manually.\n" "\n" " * \"%s\": you can click on \"%s\" to change the parameters associated with\n" "the card if you feel the configuration is wrong.\n" "\n" " * \"%s\": by default, DrakX configures your graphical interface in\n" "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" "\"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": if you wish to configure your Internet or local network access,\n" "you can do so now. Refer to the printed documentation or use the\n" "Mandrakelinux Control Center after the installation has finished to benefit\n" "from full in-line help.\n" "\n" " * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n" "you're installing on is to be located behind a proxy server.\n" "\n" " * \"%s\": this entry allows you to redefine the security level as set in a\n" "previous step ().\n" "\n" " * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" "idea to protect yourself from intrusions by setting up a firewall. Consult\n" "the corresponding section of the ``Starter Guide'' for details about\n" "firewall settings.\n" "\n" " * \"%s\": if you wish to change your bootloader configuration, click this\n" "button. This should be reserved to advanced users. Refer to the printed\n" "documentation or the in-line help about bootloader configuration in the\n" "Mandrakelinux Control Center.\n" "\n" " * \"%s\": through this entry you can fine tune which services will be run\n" "on your machine. If you plan to use this machine as a server it's a good\n" "idea to review this setup." msgstr "" #: help.pm:855 install_steps_interactive.pm:964 standalone/drakclock:100 #, fuzzy, c-format msgid "Timezone" msgstr "Тэма" #: help.pm:855 install_steps_interactive.pm:1038 #, c-format msgid "TV card" msgstr "" #: help.pm:855 #, fuzzy, c-format msgid "ISDN card" msgstr "Унутраная ISDN карта" #: help.pm:855 #, fuzzy, c-format msgid "Graphical Interface" msgstr "Запуск X пры старце сістэмы" #: help.pm:855 install_any.pm:1528 install_steps_interactive.pm:1056 #: standalone/drakbackup:2036 #, c-format msgid "Network" msgstr "Сетка" #: help.pm:855 install_steps_interactive.pm:1071 #, fuzzy, c-format msgid "Proxies" msgstr "Проксі" #: help.pm:855 install_steps_interactive.pm:1082 #, c-format msgid "Security Level" msgstr "Узровень бясьпекі" #: help.pm:855 install_steps_interactive.pm:1096 #, c-format msgid "Firewall" msgstr "" #: help.pm:855 install_steps_interactive.pm:1110 #, fuzzy, c-format msgid "Bootloader" msgstr "Усталяванне загрузчыку" #: help.pm:855 install_steps_interactive.pm:1123 services.pm:193 #, c-format msgid "Services" msgstr "Сэрвісы" #: help.pm:858 #, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrakelinux partition. Be careful, all data on this drive will be lost\n" "and will not be recoverable!" msgstr "" #: help.pm:863 #, c-format msgid "" "Click on \"%s\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"%s\" to quit this operation without losing data and partitions\n" "present on this hard drive." msgstr "" #: help.pm:869 #, c-format msgid "Next ->" msgstr "Далей ->" #: help.pm:869 #, c-format msgid "<- Previous" msgstr "<- прылада" #: install2.pm:117 #, c-format msgid "" "Can not access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" #: install2.pm:167 #, c-format msgid "You must also format %s" msgstr "" #: install_any.pm:376 #, fuzzy, c-format msgid "Do you have further supplementary media?" msgstr "Ці ёсць у вас іншы?" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:379 #, fuzzy, c-format msgid "" "The following media have been found and will be used during install: %s.\n" "\n" "\n" "Do you have a supplementary installation media to configure?" msgstr "Ці ёсць у вас %s інтэрфейс?" #: install_any.pm:388 printer/printerdrake.pm:2929 #: printer/printerdrake.pm:2936 standalone/scannerdrake:182 #: standalone/scannerdrake:190 standalone/scannerdrake:241 #: standalone/scannerdrake:248 #, c-format msgid "CD-ROM" msgstr "CD-ROM" #: install_any.pm:388 #, fuzzy, c-format msgid "Network (http)" msgstr "Сетка" #: install_any.pm:388 #, fuzzy, c-format msgid "Network (ftp)" msgstr "Сетка" #: install_any.pm:436 standalone/drakbackup:112 #, fuzzy, c-format msgid "No device found" msgstr "Няма значкі" #: install_any.pm:440 #, c-format msgid "Insert the CD" msgstr "" #: install_any.pm:445 #, fuzzy, c-format msgid "Unable to mount CD-ROM" msgstr "Немагчыма адчыніць файл %s\n" #: install_any.pm:468 #, c-format msgid "Insert the CD 1 again" msgstr "" #: install_any.pm:478 install_any.pm:482 #, c-format msgid "URL of the mirror?" msgstr "" #: install_any.pm:515 #, fuzzy, c-format msgid "" "Can't find a package list file on this mirror. Make sure the location is " "correct." msgstr "Не знойздены праграмы\n" #: install_any.pm:633 #, c-format msgid "" "Change your Cd-Rom!\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done." msgstr "" "Змяніце ваш Cd-Rom!\n" "Калі ласка, устаўце Cd-Rom, пазначаны \"%s\", у ваш дыскавод і націсніце Ок " "пасля." #: install_any.pm:652 #, fuzzy, c-format msgid "Copying in progress" msgstr "Стварэньне меню ўжо запушчана" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:783 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They do not have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:806 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" #: install_any.pm:1214 partition_table.pm:603 #, c-format msgid "Error reading file %s" msgstr "Памылка чытання файлу %s" #: install_any.pm:1425 #, fuzzy, c-format msgid "The following disk(s) were renamed:" msgstr "Наступныя пакеты будуць даданы да сістэмы" #: install_any.pm:1427 #, c-format msgid "%s (previously named as %s)" msgstr "" #: install_any.pm:1465 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "Памылка: для стварэння новых файлавых сістэмаў не знайдзены адпаведныя \n" "прылады. Праверце абсталяванне для пошуку імавернай прычыны." #: install_any.pm:1509 #, c-format msgid "HTTP" msgstr "" #: install_any.pm:1509 #, c-format msgid "FTP" msgstr "FTP" #: install_any.pm:1509 #, fuzzy, c-format msgid "NFS" msgstr "ФС" #: install_any.pm:1532 #, fuzzy, c-format msgid "Please choose a media" msgstr "Калі ласка выбярыце відарыс відэа" #: install_any.pm:1564 #, fuzzy, c-format msgid "Bad media %s" msgstr "Загружаецца файл %s" #: install_any.pm:1576 #, fuzzy, c-format msgid "File already exists. Overwrite it?" msgstr "Файл ужо йснуе. Перапісаць?" #: install_any.pm:1627 #, fuzzy, c-format msgid "Can not make screenshots before partitioning" msgstr "Дадаць раздзел немагчыма" #: install_any.pm:1634 #, c-format msgid "Screenshots will be available after install in %s" msgstr "" #: install_gtk.pm:136 #, fuzzy, c-format msgid "System installation" msgstr "Інфармацыя аб памяці" #: install_gtk.pm:139 #, fuzzy, c-format msgid "System configuration" msgstr "Канфігурацыя сістэмных сэрвісаў" #: install_interactive.pm:22 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "Пэўнае абсталяванне патрабуе камерцыйных драйвераў для працы.\n" "Часткова інфармацыю пра іх можна атрымаць тут: %s" #: install_interactive.pm:62 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Вы павінны мець каранёвы раздзел.\n" "Для гэтага стварыце раздзел (альбо адзначце ўжо існуючы).\n" "Потым абярыце ‟Кропка манціравання” і ўстанавіце яе ў ‛/’" #: install_interactive.pm:67 #, c-format msgid "" "You do not have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "Няма раздзела swap.\n" "\n" "Усё адно працягваць?" #: install_interactive.pm:70 install_steps.pm:211 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "" #: install_interactive.pm:97 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "Не хапае прасторы для стварэння новых раздзелаў" #: install_interactive.pm:105 #, c-format msgid "Use existing partitions" msgstr "Выкарыстоўваць існуючы раздзел" #: install_interactive.pm:107 #, c-format msgid "There is no existing partition to use" msgstr "Няма існуючых раздзелаў, якія можна выкарыстаць" #: install_interactive.pm:114 #, c-format msgid "Use the Windows partition for loopback" msgstr "Выкарыстоўваць раздзел Windows для віртуальнай файлавай сістэмы" #: install_interactive.pm:117 #, fuzzy, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "Памеры якога раздзела вы жадаеце змяніць?" #: install_interactive.pm:119 #, c-format msgid "Choose the sizes" msgstr "Выбар памераў" #: install_interactive.pm:120 #, c-format msgid "Root partition size in MB: " msgstr "Каранёвы раздзел ў Мб: " #: install_interactive.pm:121 #, c-format msgid "Swap partition size in MB: " msgstr "Памер swap раздзелу ў Мб:" #: install_interactive.pm:130 #, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "" #: install_interactive.pm:139 #, c-format msgid "Which partition do you want to resize?" msgstr "Памеры якога раздзела вы жадаеце змяніць?" #: install_interactive.pm:153 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occurred: %s" msgstr "" "У праграмы змены памераў раздзела FAT не атрымалася\n" "апрацаваць Ваш раздзел, памылка: %s" #: install_interactive.pm:156 #, fuzzy, c-format msgid "Computing the size of the Windows partition" msgstr "Выкарыстоўваць незанятую прастору на раздзеле Windows" #: install_interactive.pm:163 #, c-format msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrakelinux " "installation." msgstr "" "Ваш раздзел з Windows занадта фрагментаваны. \n" "Рэкамендуем спачатку запусціць праграму ‟defrag”" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_interactive.pm:166 #, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this\n" "operation is dangerous. If you have not already done so, you\n" "first need to exit the installation, run \"chkdsk c:\" from a\n" "Command Prompt under Windows (beware, running graphical program\n" "\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" "Command Prompt!), optionally run defrag, then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" #: install_interactive.pm:178 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "Якую прастору захаваць для Windows?" #: install_interactive.pm:179 #, c-format msgid "partition %s" msgstr "Раздзел %s" #: install_interactive.pm:188 #, c-format msgid "Resizing Windows partition" msgstr "Вылічэнне межаў файлавай сістэмы Windows" #: install_interactive.pm:193 #, c-format msgid "FAT resizing failed: %s" msgstr "Аўтазмяненне памераў не атрымалася для раздзелу FAT %s" #: install_interactive.pm:208 #, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "" #: install_interactive.pm:213 #, c-format msgid "Remove Windows(TM)" msgstr "Выдаліць Windows™" #: install_interactive.pm:215 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "На які з маючыхся жорсткіх дыскаў Вы жадаеце ўсталяваць Linux?" #: install_interactive.pm:219 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "Усе існуючыя раздзелы на дыску %s і дадзеныя на іх будуць страчаны" #: install_interactive.pm:232 #, c-format msgid "Use fdisk" msgstr "Выкарыстоўваць fdisk" #: install_interactive.pm:235 #, c-format msgid "" "You can now partition %s.\n" "When you are done, do not forget to save using `w'" msgstr "" "Вы можаце цяпер разбіць ваш дыск %s\n" "Па заканчэнні не забудзьцеся захаваць змяненні, скарыстаўшы ‛w’" #: install_interactive.pm:271 #, fuzzy, c-format msgid "I can not find any room for installing" msgstr "Дадаць раздзел немагчыма" #: install_interactive.pm:275 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "Майстар падрыхтоўкі раздзелаў DrakX знайшоў наступныя варыянты:" #: install_interactive.pm:281 #, c-format msgid "Partitioning failed: %s" msgstr "Падрыхтоўка разделаў не ўдалася: %s" #: install_interactive.pm:288 #, c-format msgid "Bringing up the network" msgstr "Далучэнне да сеткі" #: install_interactive.pm:293 #, c-format msgid "Bringing down the network" msgstr "Адлучэнне ад сеткі" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:10 #, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the " "Mandrakelinux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrakelinux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "Mandrakesoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "Mandrakesoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if Mandrakesoft S.A. has been advised of the possibility or " "occurrence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, Mandrakesoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrakelinux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to Mandrakesoft.\n" "The programs developed by Mandrakesoft S.A. are governed by the GPL License. " "Documentation written \n" "by Mandrakesoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "Mandrakesoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrakelinux\" and associated logos are trademarks of " "Mandrakesoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact Mandrakesoft S.A. \n" msgstr "" #: install_messages.pm:90 #, c-format msgid "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, " "the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a " "patent\n" "may be applicable to you, check your local laws." msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:98 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" #: install_messages.pm:131 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of " "Mandrakelinux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrakelinux User's Guide." msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:144 #, c-format msgid "http://www.mandrakelinux.com/en/errata.php3" msgstr "http://www.mandrakelinux.com/en/errata.php3" #: install_steps.pm:246 #, c-format msgid "Duplicate mount point %s" msgstr "Дубляванне пункту манціравання %s" #: install_steps.pm:479 #, c-format msgid "" "Some important packages did not get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm" "\"\n" msgstr "" "Некаторыя важныя пакеты не былі ўсталяваны карэктна.\n" "Другі ваш cdrom дыск ці ваш cdrom маюць дэфекты.\n" "Праверце cdrom на вашым кампутары, выкарыстоўваючы\"rpm -qpl media/main/*.rpm" "\"\n" #: install_steps.pm:599 #, c-format msgid "No floppy drive available" msgstr "Дыскавод недаступны" #: install_steps_auto_install.pm:76 install_steps_stdio.pm:27 #, c-format msgid "Entering step `%s'\n" msgstr "Пераход на крок ‛%s’\n" #: install_steps_gtk.pm:177 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrakelinux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "У Вашай сістэме маецца недахоп рэсурсаў, таму магчымы праблемы\n" "пры ўсталяванні Mandrakelinux. У гэтым выпадку паспрабуйце тэкставую\n" "праграму ўсталявання. Для гэтага націсніце ‛F1’ у час загрузкі, а потым\n" "набярыце ‛text’ і націсніце ." #: install_steps_gtk.pm:224 install_steps_interactive.pm:624 #, c-format msgid "Package Group Selection" msgstr "Выбар групы пакетаў" #: install_steps_gtk.pm:250 install_steps_interactive.pm:567 #, c-format msgid "Total size: %d / %d MB" msgstr "Агульны памер: %d / %d Мб" #: install_steps_gtk.pm:295 #, c-format msgid "Bad package" msgstr "Дрэнны пакет" #: install_steps_gtk.pm:297 #, c-format msgid "Version: " msgstr "Вэрсія: " #: install_steps_gtk.pm:298 #, c-format msgid "Size: " msgstr "Памер: " #: install_steps_gtk.pm:298 #, c-format msgid "%d KB\n" msgstr "" #: install_steps_gtk.pm:299 #, fuzzy, c-format msgid "Importance: " msgstr "важна" #: install_steps_gtk.pm:332 #, c-format msgid "You can not select/unselect this package" msgstr "Вы не можаце вылучаць і адмяняць вылучэнне гэтага пакету" #: install_steps_gtk.pm:336 #, c-format msgid "due to missing %s" msgstr "" #: install_steps_gtk.pm:337 #, c-format msgid "due to unsatisfied %s" msgstr "" #: install_steps_gtk.pm:338 #, c-format msgid "trying to promote %s" msgstr "" #: install_steps_gtk.pm:339 #, fuzzy, c-format msgid "in order to keep %s" msgstr "Уласьцівасьці акна" #: install_steps_gtk.pm:344 #, c-format msgid "" "You can not select this package as there is not enough space left to install " "it" msgstr "" "Вы не можаце выбраць гэты пакет, таму як не хапае месца для яго ўсталявання" #: install_steps_gtk.pm:347 #, c-format msgid "The following packages are going to be installed" msgstr "Наступныя пакеты будуць даданы да сістэмы" #: install_steps_gtk.pm:348 #, c-format msgid "The following packages are going to be removed" msgstr "Наступныя пакеты будуць выдалены" #: install_steps_gtk.pm:372 #, c-format msgid "This is a mandatory package, it can not be unselected" msgstr "Гэта абавязковы пакет, яго вылучэнне нельга адмяніць" #: install_steps_gtk.pm:374 #, c-format msgid "You can not unselect this package. It is already installed" msgstr "Вы не можаце адмяніць вылучэнне гэтага пакету. Ён ужо ўсталяваны" #: install_steps_gtk.pm:377 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "Гэты пакет павінен быць абноўлены\n" "Вы ўпэўнены, што хочаце адмяніць вылучэнне?" #: install_steps_gtk.pm:380 #, c-format msgid "You can not unselect this package. It must be upgraded" msgstr "Вы не можаце адмяніць вылучэнне гэтага пакету. Яго патрэбна абнавіць" #: install_steps_gtk.pm:385 #, c-format msgid "Show automatically selected packages" msgstr "" #: install_steps_gtk.pm:390 #, fuzzy, c-format msgid "Load/Save selection" msgstr "Перанесьці вылучэньне" #: install_steps_gtk.pm:391 #, fuzzy, c-format msgid "Updating package selection" msgstr "Асабісты выбар пакетаў" #: install_steps_gtk.pm:396 #, fuzzy, c-format msgid "Minimal install" msgstr "Ахоўнік экрану" #: install_steps_gtk.pm:410 install_steps_interactive.pm:483 #, c-format msgid "Choose the packages you want to install" msgstr "Выбар пакетаў для ўсталявання" #: install_steps_gtk.pm:426 install_steps_interactive.pm:706 #, c-format msgid "Installing" msgstr "Усталёўваем" #: install_steps_gtk.pm:433 #, c-format msgid "Estimating" msgstr "Чакаецца" #: install_steps_gtk.pm:482 #, fuzzy, c-format msgid "No details" msgstr "Падрабязнасці" #: install_steps_gtk.pm:490 #, c-format msgid "Time remaining " msgstr "Засталося часу " #: install_steps_gtk.pm:497 #, fuzzy, c-format msgid "Please wait, preparing installation..." msgstr "Падрыхтоўка ўсталяваньня" #: install_steps_gtk.pm:512 #, c-format msgid "%d packages" msgstr "%d пакетаў" #: install_steps_gtk.pm:517 #, c-format msgid "Installing package %s" msgstr "Усталяванне пакету %s" #: install_steps_gtk.pm:552 install_steps_interactive.pm:92 #: install_steps_interactive.pm:731 #, c-format msgid "Refuse" msgstr "Адказаць" #: install_steps_gtk.pm:556 install_steps_interactive.pm:735 #, fuzzy, c-format msgid "" "Change your Cd-Rom!\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you do not have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "Змяніце ваш Cd-Rom!\n" "\n" "Калі ласка, устаўце Cd-Rom, пазначаны \"%s\", у ваш дыскавод і націсніце Ок " "пасля.\n" "Калі вы не маеце яго, націсніце Адмяніць, каб адмяніць усталяванне з гэтага " "Cd." #: install_steps_gtk.pm:571 install_steps_interactive.pm:746 #, c-format msgid "There was an error ordering packages:" msgstr "Атрымалася памылка ўпарадкавання пакетаў:" #: install_steps_gtk.pm:571 install_steps_gtk.pm:575 #: install_steps_interactive.pm:746 install_steps_interactive.pm:750 #, c-format msgid "Go on anyway?" msgstr "Усё роўна працягваць?" #: install_steps_gtk.pm:575 install_steps_interactive.pm:750 #, c-format msgid "There was an error installing packages:" msgstr "Атрымалася памылка ўпарадкавання пакетаў:" #: install_steps_gtk.pm:617 install_steps_interactive.pm:920 #: install_steps_interactive.pm:1072 #, fuzzy, c-format msgid "not configured" msgstr "Настроіць панэль" #: install_steps_gtk.pm:680 #, c-format msgid "" "The following installation media have been found.\n" "If you want to skip some of them, you can unselect them now." msgstr "" #: install_steps_gtk.pm:684 #, c-format msgid "" "You have the option to copy the contents of the CDs onto the hard drive " "before installation.\n" "It will then continue from the hard drive and the packages will remain " "available once the system is fully installed." msgstr "" #: install_steps_gtk.pm:686 #, c-format msgid "Copy whole CDs" msgstr "" #: install_steps_interactive.pm:85 #, c-format msgid "License agreement" msgstr "Ліцэнзійная дамова" #: install_steps_interactive.pm:89 #, fuzzy, c-format msgid "Release Notes" msgstr "Калі ласка, пачакайце" #: install_steps_interactive.pm:119 #, fuzzy, c-format msgid "Please choose your keyboard layout." msgstr "Калі ласка, абярыце тып клавіятуры." #: install_steps_interactive.pm:121 #, c-format msgid "Here is the full list of available keyboards" msgstr "" #: install_steps_interactive.pm:151 #, fuzzy, c-format msgid "Install/Upgrade" msgstr "Усталёўваем" #: install_steps_interactive.pm:152 #, c-format msgid "Is this an install or an upgrade?" msgstr "" #: install_steps_interactive.pm:158 #, c-format msgid "Upgrade %s" msgstr "" #: install_steps_interactive.pm:168 #, c-format msgid "Encryption key for %s" msgstr "" #: install_steps_interactive.pm:185 #, fuzzy, c-format msgid "Please choose your type of mouse." msgstr "калі ласка, пазначце тып вашай мышы." #: install_steps_interactive.pm:194 standalone/mousedrake:46 #, c-format msgid "Mouse Port" msgstr "Порт мышы" #: install_steps_interactive.pm:195 standalone/mousedrake:47 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "Калі ласка, пазначце послядоўны порт, да якога падключана вашая мыш." #: install_steps_interactive.pm:205 #, c-format msgid "Buttons emulation" msgstr "" #: install_steps_interactive.pm:207 #, fuzzy, c-format msgid "Button 2 Emulation" msgstr "Калькулятар" #: install_steps_interactive.pm:208 #, c-format msgid "Button 3 Emulation" msgstr "" #: install_steps_interactive.pm:229 #, c-format msgid "PCMCIA" msgstr "PCMCIA" #: install_steps_interactive.pm:229 #, c-format msgid "Configuring PCMCIA cards..." msgstr "Настройка карт PCMCIA ..." #: install_steps_interactive.pm:236 #, c-format msgid "IDE" msgstr "IDE" #: install_steps_interactive.pm:236 #, c-format msgid "Configuring IDE" msgstr "Настройка IDE" #: install_steps_interactive.pm:256 network/tools.pm:172 #, c-format msgid "No partition available" msgstr "няма даступных раздзелаў" #: install_steps_interactive.pm:259 #, c-format msgid "Scanning partitions to find mount points" msgstr "" #: install_steps_interactive.pm:266 #, c-format msgid "Choose the mount points" msgstr "Абярыце пункты манціравання" #: install_steps_interactive.pm:312 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" #: install_steps_interactive.pm:317 #, c-format msgid "" "You'll need to create a PPC PReP Boot bootstrap! Install will continue, but " "to boot your system, you'll need to create the bootstrap partition in " "DiskDrake" msgstr "" #: install_steps_interactive.pm:353 #, c-format msgid "Choose the partitions you want to format" msgstr "Выбар раздзелаў для фарматавання" #: install_steps_interactive.pm:355 #, c-format msgid "Check bad blocks?" msgstr "Праверыць на наяўнасць дрэнных блокаў?" #: install_steps_interactive.pm:383 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can lose data)" msgstr "" #: install_steps_interactive.pm:386 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "" "Не хапае месца ў буферы падкачкі (swap) для ўсталявання, павялічце яго." #: install_steps_interactive.pm:393 #, fuzzy, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "Прагляд даступных пакетаў" #: install_steps_interactive.pm:394 install_steps_interactive.pm:452 #, c-format msgid "Looking for available packages..." msgstr "Прагляд даступных пакетаў" #: install_steps_interactive.pm:397 #, fuzzy, c-format msgid "Looking at packages already installed..." msgstr "Вы не можаце адмяніць вылучэнне гэтага пакету. Ён ужо ўсталяваны" #: install_steps_interactive.pm:401 #, c-format msgid "Finding packages to upgrade..." msgstr "Пошук пакетаў для абнаўлення" #: install_steps_interactive.pm:421 install_steps_interactive.pm:825 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "Выбар люстра для атрымання пакетаў" #: install_steps_interactive.pm:461 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" "Ваша сістэма не мае дастакова месца для ўсталявання ці абнаўлення (%d > %d)" #: install_steps_interactive.pm:495 #, c-format msgid "" "Please choose load or save package selection.\n" "The format is the same as auto_install generated files." msgstr "" #: install_steps_interactive.pm:497 #, c-format msgid "Load" msgstr "Загрузка" #: install_steps_interactive.pm:497 standalone/drakbackup:3924 #: standalone/drakbackup:3997 standalone/logdrake:173 #, c-format msgid "Save" msgstr "Захаваць" #: install_steps_interactive.pm:505 #, fuzzy, c-format msgid "Bad file" msgstr "Загрузка файла" #: install_steps_interactive.pm:581 #, c-format msgid "Selected size is larger than available space" msgstr "" #: install_steps_interactive.pm:596 #, c-format msgid "Type of install" msgstr "" #: install_steps_interactive.pm:597 #, c-format msgid "" "You have not selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" #: install_steps_interactive.pm:601 #, c-format msgid "With basic documentation (recommended!)" msgstr "" #: install_steps_interactive.pm:602 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "" #: install_steps_interactive.pm:641 standalone/drakxtv:52 #, c-format msgid "All" msgstr "Усё" #: install_steps_interactive.pm:680 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "Калі вы маеце ўсе CD дыскі са спіса ніжэй, націсніце Ок.\n" "Калі вы не маеце ані воднага з гэтых CD дыскаў, націсніце Адмяніць.\n" "Калі некаторых з CD дыскаў не маеце, адмяніце іх выдзяленне і націсніце Ок." #: install_steps_interactive.pm:685 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "Cd-Rom пазначаны \"%s\"" #: install_steps_interactive.pm:706 #, c-format msgid "Preparing installation" msgstr "Падрыхтоўка ўсталяваньня" #: install_steps_interactive.pm:715 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "Усталяванне пакету %s\n" "%d%%" #: install_steps_interactive.pm:764 #, c-format msgid "Post-install configuration" msgstr "Настройка пасля ўсталявання" #: install_steps_interactive.pm:770 #, fuzzy, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "Устаўце дыскету ў дыскавод %s" #: install_steps_interactive.pm:799 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates?" msgstr "" #: install_steps_interactive.pm:820 #, fuzzy, c-format msgid "" "Contacting Mandrakelinux web site to get the list of available mirrors..." msgstr "Сувязь з люрам для атрымання спісу даступных пакетаў" #: install_steps_interactive.pm:839 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "Сувязь з люрам для атрымання спісу даступных пакетаў" #: install_steps_interactive.pm:843 #, fuzzy, c-format msgid "Unable to contact mirror %s" msgstr "Немагчыма адчыніць файл %s\n" #: install_steps_interactive.pm:843 #, fuzzy, c-format msgid "Would you like to try again?" msgstr "Дрэнны выбар, паспрабуйце яшче\n" #: install_steps_interactive.pm:869 standalone/drakclock:45 #, c-format msgid "Which is your timezone?" msgstr "Які ваш часавы пояс?" #: install_steps_interactive.pm:874 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "" #: install_steps_interactive.pm:882 #, fuzzy, c-format msgid "NTP Server" msgstr "NIS сэервер:" #: install_steps_interactive.pm:924 steps.pm:30 #, c-format msgid "Summary" msgstr "Агульныя зьвесткі" #: install_steps_interactive.pm:937 install_steps_interactive.pm:945 #: install_steps_interactive.pm:963 install_steps_interactive.pm:970 #: install_steps_interactive.pm:1122 services.pm:133 #: standalone/drakbackup:1599 #, c-format msgid "System" msgstr "Сістэма" #: install_steps_interactive.pm:977 install_steps_interactive.pm:1004 #: install_steps_interactive.pm:1021 install_steps_interactive.pm:1037 #: install_steps_interactive.pm:1048 #, c-format msgid "Hardware" msgstr "Абсталяваньне" #: install_steps_interactive.pm:983 install_steps_interactive.pm:992 #, c-format msgid "Remote CUPS server" msgstr "Аддалены сэервер CUPS" #: install_steps_interactive.pm:983 #, fuzzy, c-format msgid "No printer" msgstr "Імя друкаркі" #: install_steps_interactive.pm:1025 #, fuzzy, c-format msgid "Do you have an ISA sound card?" msgstr "Ці ёсць у вас іншы?" #: install_steps_interactive.pm:1027 #, c-format msgid "" "Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound " "card" msgstr "" #: install_steps_interactive.pm:1029 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" #: install_steps_interactive.pm:1049 #, fuzzy, c-format msgid "Graphical interface" msgstr "Запуск X пры старце сістэмы" #: install_steps_interactive.pm:1055 install_steps_interactive.pm:1070 #, fuzzy, c-format msgid "Network & Internet" msgstr "Сеткавы інтэрфейс" #: install_steps_interactive.pm:1072 #, fuzzy, c-format msgid "configured" msgstr "Настроіць панэль" #: install_steps_interactive.pm:1081 install_steps_interactive.pm:1095 #: steps.pm:20 #, c-format msgid "Security" msgstr "Бясьпека" #: install_steps_interactive.pm:1100 #, c-format msgid "activated" msgstr "" #: install_steps_interactive.pm:1100 #, c-format msgid "disabled" msgstr "выключаны" #: install_steps_interactive.pm:1109 #, fuzzy, c-format msgid "Boot" msgstr "Манітор" #. -PO: example: lilo-graphic on /dev/hda1 #: install_steps_interactive.pm:1113 #, c-format msgid "%s on %s" msgstr "%s на %s" #: install_steps_interactive.pm:1127 services.pm:175 #, c-format msgid "Services: %d activated for %d registered" msgstr "" #: install_steps_interactive.pm:1137 #, fuzzy, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "Меню не было захавана. Ці сапраўды вы жадаеце выйсці?" #: install_steps_interactive.pm:1217 #, c-format msgid "Preparing bootloader..." msgstr "Падрыхтоўка загрузчыка" #: install_steps_interactive.pm:1227 #, c-format msgid "" "You appear to have an OldWorld or Unknown machine, the yaboot bootloader " "will not work for you. The install will continue, but you'll need to use " "BootX or some other means to boot your machine. The kernel argument for the " "root fs is: root=%s" msgstr "" #: install_steps_interactive.pm:1233 #, c-format msgid "Do you want to use aboot?" msgstr "Вы жадаеце выкарыстоўваць aboot?" #: install_steps_interactive.pm:1236 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "Памылка ўсталявання aboot, \n" "спрабаваць усталёўваць, негледзячы на магчымасць парушэння першага разделу?" #: install_steps_interactive.pm:1257 #, c-format msgid "" "In this security level, access to the files in the Windows partition is " "restricted to the administrator." msgstr "" #: install_steps_interactive.pm:1286 standalone/drakautoinst:76 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "Устаўце дыскету ў дыскавод %s" #: install_steps_interactive.pm:1291 #, fuzzy, c-format msgid "Please insert another floppy for drivers disk" msgstr "Устаўце дыскету ў дыскавод %s" #: install_steps_interactive.pm:1293 #, c-format msgid "Creating auto install floppy..." msgstr "Стварэнне дыскеты для ўсталявання" #: install_steps_interactive.pm:1305 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "Некаторыя крокі не завершаны.\n" "Вы сапраўды жадаеце выйсці зараз?" #: install_steps_interactive.pm:1321 #, fuzzy, c-format msgid "Generate auto install floppy" msgstr "Стварэнне дыскеты для ўсталявання" #: install_steps_interactive.pm:1323 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" #: install_steps_newt.pm:20 #, c-format msgid "Mandrakelinux Installation %s" msgstr "Усталяванне Mandrakelinux %s" #. -PO: This string must fit in a 80-char wide text screen #: install_steps_newt.pm:34 #, c-format msgid "" " / between elements | selects | next screen " msgstr "" " / паміж элементамі | выбар | наступны экран " #: interactive.pm:184 #, c-format msgid "Choose a file" msgstr "Выбар файла" #: interactive.pm:309 interactive/gtk.pm:489 standalone/drakbackup:1540 #: standalone/drakfont:593 standalone/drakfont:660 standalone/drakups:297 #: standalone/drakups:357 standalone/drakups:377 standalone/drakvpn:333 #: standalone/drakvpn:694 #, c-format msgid "Add" msgstr "Дадаць" #: interactive.pm:309 interactive/gtk.pm:489 #, c-format msgid "Modify" msgstr "Зьмяненьне" #: interactive.pm:309 interactive/gtk.pm:489 standalone/drakups:299 #: standalone/drakups:359 standalone/drakups:379 standalone/drakvpn:333 #: standalone/drakvpn:694 #, c-format msgid "Remove" msgstr "Выдаліць" #: interactive.pm:386 #, c-format msgid "Basic" msgstr "Простые" #: interactive.pm:424 interactive/newt.pm:317 ugtk2.pm:506 #, c-format msgid "Finish" msgstr "Скончыць" #: interactive/newt.pm:92 #, fuzzy, c-format msgid "Do" msgstr "Зроблена" #: interactive/stdio.pm:29 interactive/stdio.pm:148 #, c-format msgid "Bad choice, try again\n" msgstr "Дрэнны выбар, паспрабуйце яшче\n" #: interactive/stdio.pm:30 interactive/stdio.pm:149 #, c-format msgid "Your choice? (default %s) " msgstr "Ваш выбар? (змоўчанне %s) " #: interactive/stdio.pm:54 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" #: interactive/stdio.pm:70 #, fuzzy, c-format msgid "Your choice? (0/1, default `%s') " msgstr "Ваш выбар? (змоўчанне %s) " #: interactive/stdio.pm:94 #, fuzzy, c-format msgid "Button `%s': %s" msgstr "Клявіша %d:" #: interactive/stdio.pm:95 #, fuzzy, c-format msgid "Do you want to click on this button?" msgstr "Вы жадаеце выкарыстоўваць aboot?" #: interactive/stdio.pm:104 #, fuzzy, c-format msgid "Your choice? (default `%s'%s) " msgstr "Ваш выбар? (змоўчанне %s) " #: interactive/stdio.pm:104 #, c-format msgid " enter `void' for void entry" msgstr "" #: interactive/stdio.pm:122 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "" #: interactive/stdio.pm:125 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" #: interactive/stdio.pm:138 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" #: interactive/stdio.pm:145 #, c-format msgid "Re-submit" msgstr "" #: keyboard.pm:170 keyboard.pm:204 #, c-format msgid "" "_: keyboard\n" "Czech (QWERTZ)" msgstr "Чешскі (QWERTZ)" #: keyboard.pm:171 keyboard.pm:206 #, c-format msgid "" "_: keyboard\n" "German" msgstr "Нямецкі" #: keyboard.pm:172 #, c-format msgid "" "_: keyboard\n" "Dvorak" msgstr "Dvorak" #: keyboard.pm:173 keyboard.pm:223 #, c-format msgid "" "_: keyboard\n" "Spanish" msgstr "Іспанскі" #: keyboard.pm:174 keyboard.pm:224 #, c-format msgid "" "_: keyboard\n" "Finnish" msgstr "Фінскі" #: keyboard.pm:175 keyboard.pm:227 #, c-format msgid "" "_: keyboard\n" "French" msgstr "Французскі" #: keyboard.pm:176 keyboard.pm:275 #, c-format msgid "" "_: keyboard\n" "Norwegian" msgstr "Нарвежскі" #: keyboard.pm:177 #, c-format msgid "" "_: keyboard\n" "Polish" msgstr "Польскі" #: keyboard.pm:178 keyboard.pm:287 #, c-format msgid "" "_: keyboard\n" "Russian" msgstr "Рускі" #: keyboard.pm:180 keyboard.pm:293 #, c-format msgid "" "_: keyboard\n" "Swedish" msgstr "Швецкі" #: keyboard.pm:181 keyboard.pm:320 #, c-format msgid "UK keyboard" msgstr "UK клавіятура" #: keyboard.pm:182 keyboard.pm:323 #, c-format msgid "US keyboard" msgstr "US клавіятура" #: keyboard.pm:184 #, fuzzy, c-format msgid "" "_: keyboard\n" "Albanian" msgstr "Албанская:" #: keyboard.pm:185 #, c-format msgid "" "_: keyboard\n" "Armenian (old)" msgstr "Армянскі (стары)" #: keyboard.pm:186 #, c-format msgid "" "_: keyboard\n" "Armenian (typewriter)" msgstr "Армянскі (typewriter)" #: keyboard.pm:187 #, c-format msgid "" "_: keyboard\n" "Armenian (phonetic)" msgstr "Армянскі (фанетычны)" #: keyboard.pm:188 #, c-format msgid "" "_: keyboard\n" "Arabic" msgstr "" #: keyboard.pm:189 #, c-format msgid "" "_: keyboard\n" "Azerbaidjani (latin)" msgstr "Азербайджанскі (latin)" #: keyboard.pm:190 #, c-format msgid "" "_: keyboard\n" "Belgian" msgstr "Бельгійскі" #: keyboard.pm:191 #, fuzzy, c-format msgid "" "_: keyboard\n" "Bengali (Inscript-layout)" msgstr "Армянскі (typewriter)" #: keyboard.pm:192 #, fuzzy, c-format msgid "" "_: keyboard\n" "Bengali (Probhat)" msgstr "Бельгійскі" #: keyboard.pm:193 #, c-format msgid "" "_: keyboard\n" "Bulgarian (phonetic)" msgstr "Балгарскі (фанетычны)" #: keyboard.pm:194 #, c-format msgid "" "_: keyboard\n" "Bulgarian (BDS)" msgstr "Балгарскі (БДС)" #: keyboard.pm:195 #, c-format msgid "" "_: keyboard\n" "Brazilian (ABNT-2)" msgstr "Бразільскі (ABNT-2)" #: keyboard.pm:196 #, fuzzy, c-format msgid "" "_: keyboard\n" "Bosnian" msgstr "Румынская:" #: keyboard.pm:197 #, c-format msgid "" "_: keyboard\n" "Belarusian" msgstr "Беларускі" #: keyboard.pm:199 #, c-format msgid "" "_: keyboard\n" "Swiss (German layout)" msgstr "Швейцарскі (Нямецкая раскладка)" #: keyboard.pm:201 #, c-format msgid "" "_: keyboard\n" "Swiss (French layout)" msgstr "Швейцарскі (Французская раскладка)" #: keyboard.pm:203 #, fuzzy, c-format msgid "" "_: keyboard\n" "Cherokee syllabics" msgstr "Харвацкі" #: keyboard.pm:205 #, c-format msgid "" "_: keyboard\n" "Czech (QWERTY)" msgstr "Чешскі (QWERTY)" #: keyboard.pm:207 #, c-format msgid "" "_: keyboard\n" "German (no dead keys)" msgstr "Нямецкі (няма заблакіраваных клавіш)" #: keyboard.pm:208 #, fuzzy, c-format msgid "" "_: keyboard\n" "Devanagari" msgstr "Авангард" #: keyboard.pm:209 #, c-format msgid "" "_: keyboard\n" "Danish" msgstr "Дацкі" #: keyboard.pm:210 #, c-format msgid "" "_: keyboard\n" "Dvorak (US)" msgstr "Dvorak (US)" #: keyboard.pm:212 #, fuzzy, c-format msgid "" "_: keyboard\n" "Dvorak (Esperanto)" msgstr "Dvorak (Нарвежскі)" #: keyboard.pm:214 #, fuzzy, c-format msgid "" "_: keyboard\n" "Dvorak (French)" msgstr "Dvorak (Нарвежскі)" #: keyboard.pm:216 #, fuzzy, c-format msgid "" "_: keyboard\n" "Dvorak (UK)" msgstr "Dvorak (US)" #: keyboard.pm:217 #, c-format msgid "" "_: keyboard\n" "Dvorak (Norwegian)" msgstr "Dvorak (Нарвежскі)" #: keyboard.pm:219 #, fuzzy, c-format msgid "" "_: keyboard\n" "Dvorak (Polish)" msgstr "Dvorak (US)" #: keyboard.pm:220 #, fuzzy, c-format msgid "" "_: keyboard\n" "Dvorak (Swedish)" msgstr "Dvorak (US)" #: keyboard.pm:221 #, fuzzy, c-format msgid "" "_: keyboard\n" "Dzongkha/Tibetan" msgstr "Румынская:" #: keyboard.pm:222 #, c-format msgid "" "_: keyboard\n" "Estonian" msgstr "Эстонскі" #: keyboard.pm:226 #, fuzzy, c-format msgid "" "_: keyboard\n" "Faroese" msgstr "Грэчаскі" #: keyboard.pm:228 #, c-format msgid "" "_: keyboard\n" "Georgian (\"Russian\" layout)" msgstr "Грузінскі (\"Руская\" раскладка)" #: keyboard.pm:229 #, c-format msgid "" "_: keyboard\n" "Georgian (\"Latin\" layout)" msgstr "Грузінскі (\"Лацінская\" раскладка)" #: keyboard.pm:230 #, c-format msgid "" "_: keyboard\n" "Greek" msgstr "Грэчаскі" #: keyboard.pm:231 #, c-format msgid "" "_: keyboard\n" "Greek (polytonic)" msgstr "" #: keyboard.pm:232 #, c-format msgid "" "_: keyboard\n" "Gujarati" msgstr "" #: keyboard.pm:233 #, c-format msgid "" "_: keyboard\n" "Gurmukhi" msgstr "" #: keyboard.pm:235 #, c-format msgid "" "_: keyboard\n" "Hungarian" msgstr "Мадьярскі" #: keyboard.pm:236 #, c-format msgid "" "_: keyboard\n" "Croatian" msgstr "Харвацкі" #: keyboard.pm:237 #, fuzzy, c-format msgid "" "_: keyboard\n" "Irish" msgstr "Ірландская:" #: keyboard.pm:238 #, c-format msgid "" "_: keyboard\n" "Israeli" msgstr "Іўрыт" #: keyboard.pm:239 #, c-format msgid "" "_: keyboard\n" "Israeli (phonetic)" msgstr "Іўрыт (фанетычны)" #: keyboard.pm:240 #, c-format msgid "" "_: keyboard\n" "Iranian" msgstr "Іранскі" #: keyboard.pm:241 #, c-format msgid "" "_: keyboard\n" "Icelandic" msgstr "Ісландскі" #: keyboard.pm:242 #, c-format msgid "" "_: keyboard\n" "Italian" msgstr "Італьянскі" #: keyboard.pm:243 #, c-format msgid "" "_: keyboard\n" "Inuktitut" msgstr "" #: keyboard.pm:248 #, c-format msgid "" "_: keyboard\n" "Japanese 106 keys" msgstr "Японскі 106 клавіш" #: keyboard.pm:249 #, fuzzy, c-format msgid "" "_: keyboard\n" "Kannada" msgstr "Панама" #: keyboard.pm:252 #, fuzzy, c-format msgid "" "_: keyboard\n" "Korean" msgstr "UK клавіятура" #: keyboard.pm:254 #, fuzzy, c-format msgid "" "_: keyboard\n" "Kurdish (arabic script)" msgstr "Армянскі (фанетычны)" #: keyboard.pm:255 #, fuzzy, c-format msgid "" "_: keyboard\n" "Kyrgyz" msgstr "UK клавіятура" #: keyboard.pm:256 #, c-format msgid "" "_: keyboard\n" "Latin American" msgstr "Лаціна-Амерыканскі" #: keyboard.pm:257 #, fuzzy, c-format msgid "" "_: keyboard\n" "Laotian" msgstr "Лаціна" #: keyboard.pm:259 #, c-format msgid "" "_: keyboard\n" "Lithuanian AZERTY (old)" msgstr "Літоўскі AZERTY (стары)" #: keyboard.pm:262 #, c-format msgid "" "_: keyboard\n" "Lithuanian AZERTY (new)" msgstr "Літоўскі AZERTY (новы)" #: keyboard.pm:264 #, c-format msgid "" "_: keyboard\n" "Lithuanian \"number row\" QWERTY" msgstr "Літоўскі \"нумар радка\" QWERTY" #: keyboard.pm:266 #, c-format msgid "" "_: keyboard\n" "Lithuanian \"phonetic\" QWERTY" msgstr "Літоўскі \"фанетычны\" QWERTY" #: keyboard.pm:267 #, fuzzy, c-format msgid "" "_: keyboard\n" "Latvian" msgstr "Латвійская:" #: keyboard.pm:268 #, fuzzy, c-format msgid "" "_: keyboard\n" "Malayalam" msgstr "Малазыя" #: keyboard.pm:269 #, fuzzy, c-format msgid "" "_: keyboard\n" "Macedonian" msgstr "Македонія" #: keyboard.pm:270 #, c-format msgid "" "_: keyboard\n" "Myanmar (Burmese)" msgstr "" #: keyboard.pm:271 #, c-format msgid "" "_: keyboard\n" "Mongolian (cyrillic)" msgstr "" #: keyboard.pm:272 #, c-format msgid "" "_: keyboard\n" "Maltese (UK)" msgstr "" #: keyboard.pm:273 #, c-format msgid "" "_: keyboard\n" "Maltese (US)" msgstr "" #: keyboard.pm:274 #, c-format msgid "" "_: keyboard\n" "Dutch" msgstr "Галандскі" #: keyboard.pm:276 #, fuzzy, c-format msgid "" "_: keyboard\n" "Oriya" msgstr "Опера" #: keyboard.pm:277 #, c-format msgid "" "_: keyboard\n" "Polish (qwerty layout)" msgstr "Польскі (стандартная раскладка)" #: keyboard.pm:278 #, c-format msgid "" "_: keyboard\n" "Polish (qwertz layout)" msgstr "Польскі (qwertz раскладка)" #: keyboard.pm:280 #, fuzzy, c-format msgid "" "_: keyboard\n" "Pashto" msgstr "Польскі" #: keyboard.pm:281 #, c-format msgid "" "_: keyboard\n" "Portuguese" msgstr "Партугальскі" #: keyboard.pm:283 #, c-format msgid "" "_: keyboard\n" "Canadian (Quebec)" msgstr "Канадскі (Квебэк)" #: keyboard.pm:285 #, fuzzy, c-format msgid "" "_: keyboard\n" "Romanian (qwertz)" msgstr "Румынская:" #: keyboard.pm:286 #, fuzzy, c-format msgid "" "_: keyboard\n" "Romanian (qwerty)" msgstr "Румынская:" #: keyboard.pm:288 #, c-format msgid "" "_: keyboard\n" "Russian (phonetic)" msgstr "Рускі (фанетычны)" #: keyboard.pm:289 #, fuzzy, c-format msgid "" "_: keyboard\n" "Saami (norwegian)" msgstr "Dvorak (Нарвежскі)" #: keyboard.pm:290 #, c-format msgid "" "_: keyboard\n" "Saami (swedish/finnish)" msgstr "" #: keyboard.pm:292 #, fuzzy, c-format msgid "" "_: keyboard\n" "Sindhi" msgstr "Тайская клавіятура" #: keyboard.pm:294 #, c-format msgid "" "_: keyboard\n" "Slovenian" msgstr "Славенскі" #: keyboard.pm:295 #, c-format msgid "" "_: keyboard\n" "Slovakian (QWERTZ)" msgstr "Славацкі (QWERTZ)" #: keyboard.pm:296 #, c-format msgid "" "_: keyboard\n" "Slovakian (QWERTY)" msgstr "Славацкі (QWERTY)" #: keyboard.pm:298 #, c-format msgid "" "_: keyboard\n" "Serbian (cyrillic)" msgstr "" #: keyboard.pm:299 #, c-format msgid "" "_: keyboard\n" "Syriac" msgstr "" #: keyboard.pm:300 #, fuzzy, c-format msgid "" "_: keyboard\n" "Syriac (phonetic)" msgstr "Армянскі (фанетычны)" #: keyboard.pm:301 #, fuzzy, c-format msgid "" "_: keyboard\n" "Telugu" msgstr "Такелаў" #: keyboard.pm:303 #, c-format msgid "" "_: keyboard\n" "Tamil (ISCII-layout)" msgstr "" #: keyboard.pm:304 #, fuzzy, c-format msgid "" "_: keyboard\n" "Tamil (Typewriter-layout)" msgstr "Армянскі (typewriter)" #: keyboard.pm:305 #, fuzzy, c-format msgid "" "_: keyboard\n" "Thai (Kedmanee)" msgstr "Тайская клавіятура" #: keyboard.pm:306 #, fuzzy, c-format msgid "" "_: keyboard\n" "Thai (TIS-820)" msgstr "Тайская клавіятура" #: keyboard.pm:308 #, fuzzy, c-format msgid "" "_: keyboard\n" "Thai (Pattachote)" msgstr "Тайская клавіятура" #: keyboard.pm:311 #, fuzzy, c-format msgid "" "_: keyboard\n" "Tifinagh (+latin/arabic)" msgstr "Азербайджанскі (latin)" #: keyboard.pm:313 #, fuzzy, c-format msgid "" "_: keyboard\n" "Tajik" msgstr "Тайская клавіятура" #: keyboard.pm:315 #, fuzzy, c-format msgid "" "_: keyboard\n" "Turkmen" msgstr "Нямецкі" #: keyboard.pm:316 #, c-format msgid "" "_: keyboard\n" "Turkish (traditional \"F\" model)" msgstr "Турэцкі (традыцыёная \"F\" мадэль)" #: keyboard.pm:317 #, c-format msgid "" "_: keyboard\n" "Turkish (modern \"Q\" model)" msgstr "Турэцкі (сучасная \"Q\" мадэль)" #: keyboard.pm:319 #, c-format msgid "" "_: keyboard\n" "Ukrainian" msgstr "Украінскі" #: keyboard.pm:322 #, fuzzy, c-format msgid "" "_: keyboard\n" "Urdu keyboard" msgstr "Опера" #: keyboard.pm:324 #, c-format msgid "US keyboard (international)" msgstr "US клавіятура (міжнародная)" #: keyboard.pm:325 #, c-format msgid "" "_: keyboard\n" "Uzbek (cyrillic)" msgstr "" #: keyboard.pm:327 #, c-format msgid "" "_: keyboard\n" "Vietnamese \"numeric row\" QWERTY" msgstr "Вьетнамскі \"нумар радка\" QWERTY" #: keyboard.pm:328 #, fuzzy, c-format msgid "" "_: keyboard\n" "Yugoslavian (latin)" msgstr "Азербайджанскі (latin)" #: keyboard.pm:335 #, c-format msgid "Right Alt key" msgstr "" #: keyboard.pm:336 #, c-format msgid "Both Shift keys simultaneously" msgstr "" #: keyboard.pm:337 #, c-format msgid "Control and Shift keys simultaneously" msgstr "" #: keyboard.pm:338 #, c-format msgid "CapsLock key" msgstr "" #: keyboard.pm:339 #, c-format msgid "Shift and CapsLock keys simultaneously" msgstr "" #: keyboard.pm:340 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "" #: keyboard.pm:341 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "" #: keyboard.pm:342 #, fuzzy, c-format msgid "\"Menu\" key" msgstr "Рэдактар мэню" #: keyboard.pm:343 #, fuzzy, c-format msgid "Left \"Windows\" key" msgstr "Паводзіны вокнаў" #: keyboard.pm:344 #, c-format msgid "Right \"Windows\" key" msgstr "" #: keyboard.pm:345 #, c-format msgid "Both Control keys simultaneously" msgstr "" #: keyboard.pm:346 #, c-format msgid "Both Alt keys simultaneously" msgstr "" #: keyboard.pm:347 #, c-format msgid "Left Shift key" msgstr "" #: keyboard.pm:348 #, c-format msgid "Right Shift key" msgstr "" #: keyboard.pm:349 #, c-format msgid "Left Alt key" msgstr "" #: keyboard.pm:350 #, fuzzy, c-format msgid "Left Control key" msgstr "Кантролер гучнасьці" #: keyboard.pm:351 #, fuzzy, c-format msgid "Right Control key" msgstr "Кантролер гучнасьці" #: keyboard.pm:387 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" #: keyboard.pm:392 #, c-format msgid "" "This setting will be activated after the installation.\n" "During installation, you will need to use the Right Control\n" "key to switch between the different keyboard layouts." msgstr "" #. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR" #. -PO: or as "default:RTL", depending if your language is written from #. -PO: left to right, or from right to left; any other string is wrong. #: lang.pm:173 #, c-format msgid "default:LTR" msgstr "default:LTR" #: lang.pm:190 #, c-format msgid "Andorra" msgstr "Андора" #: lang.pm:191 network/adsl_consts.pm:826 #, c-format msgid "United Arab Emirates" msgstr "Злучаныя Арабскія Эміраты" #: lang.pm:192 #, c-format msgid "Afghanistan" msgstr "Афганістан" #: lang.pm:193 #, c-format msgid "Antigua and Barbuda" msgstr "Анцігуа і Барбуда" #: lang.pm:194 #, c-format msgid "Anguilla" msgstr "Ангулла" #: lang.pm:195 #, c-format msgid "Albania" msgstr "Альбанія" #: lang.pm:196 #, c-format msgid "Armenia" msgstr "Арменія" #: lang.pm:197 #, c-format msgid "Netherlands Antilles" msgstr "Нідэрлянская Анцілія" #: lang.pm:198 #, c-format msgid "Angola" msgstr "Ангола" #: lang.pm:199 #, c-format msgid "Antarctica" msgstr "Антарктыка" #: lang.pm:200 network/adsl_consts.pm:40 standalone/drakxtv:50 #, c-format msgid "Argentina" msgstr "Аргенціна" #: lang.pm:201 #, c-format msgid "American Samoa" msgstr "Амэрыканскае Самоа" #: lang.pm:203 standalone/drakxtv:48 #, c-format msgid "Australia" msgstr "Аўстралія" #: lang.pm:204 #, c-format msgid "Aruba" msgstr "Аруба" #: lang.pm:205 #, c-format msgid "Azerbaijan" msgstr "Азарбаджан" #: lang.pm:206 #, c-format msgid "Bosnia and Herzegovina" msgstr "Босьнія й Герцэгавіна" #: lang.pm:207 #, c-format msgid "Barbados" msgstr "Барбадос" #: lang.pm:208 #, c-format msgid "Bangladesh" msgstr "Бангладэш" #: lang.pm:210 #, c-format msgid "Burkina Faso" msgstr "Буркіна Хвасо" #: lang.pm:211 network/adsl_consts.pm:143 network/adsl_consts.pm:151 #, c-format msgid "Bulgaria" msgstr "Баўгарыя" #: lang.pm:212 #, c-format msgid "Bahrain" msgstr "Бахрэйн" #: lang.pm:213 #, c-format msgid "Burundi" msgstr "Бурундзі" #: lang.pm:214 #, c-format msgid "Benin" msgstr "Бенін" #: lang.pm:215 #, c-format msgid "Bermuda" msgstr "Бермуды" #: lang.pm:216 #, c-format msgid "Brunei Darussalam" msgstr "Брунэі Дурасалям" #: lang.pm:217 #, c-format msgid "Bolivia" msgstr "Балівія" #: lang.pm:218 network/adsl_consts.pm:109 network/adsl_consts.pm:119 #: network/adsl_consts.pm:127 network/adsl_consts.pm:135 #, c-format msgid "Brazil" msgstr "Бразылія" #: lang.pm:219 #, c-format msgid "Bahamas" msgstr "Багамы" #: lang.pm:220 #, c-format msgid "Bhutan" msgstr "Бутан" #: lang.pm:221 #, c-format msgid "Bouvet Island" msgstr "Выспа Боўвіт" #: lang.pm:222 #, c-format msgid "Botswana" msgstr "Батсвана" #: lang.pm:223 #, c-format msgid "Belarus" msgstr "Беларусь" #: lang.pm:224 #, c-format msgid "Belize" msgstr "Беліз" #: lang.pm:225 #, c-format msgid "Canada" msgstr "Канада" #: lang.pm:226 #, c-format msgid "Cocos (Keeling) Islands" msgstr "Какосавыя выспы" #: lang.pm:227 #, c-format msgid "Congo (Kinshasa)" msgstr "" #: lang.pm:228 #, c-format msgid "Central African Republic" msgstr "Цэнтральная Афрыканская Рэспубліка" #: lang.pm:229 #, c-format msgid "Congo (Brazzaville)" msgstr "" #: lang.pm:231 #, c-format msgid "Cote d'Ivoire" msgstr "Котэ дэ Інворэ" #: lang.pm:232 #, c-format msgid "Cook Islands" msgstr "Выспы Кука" #: lang.pm:233 #, c-format msgid "Chile" msgstr "Чылі" #: lang.pm:234 #, c-format msgid "Cameroon" msgstr "Камэрун" #: lang.pm:235 network/adsl_consts.pm:159 network/adsl_consts.pm:167 #: network/adsl_consts.pm:175 network/adsl_consts.pm:183 #: network/adsl_consts.pm:191 network/adsl_consts.pm:199 #: network/adsl_consts.pm:207 network/adsl_consts.pm:215 #: network/adsl_consts.pm:223 network/adsl_consts.pm:231 #: network/adsl_consts.pm:239 network/adsl_consts.pm:247 #: network/adsl_consts.pm:255 network/adsl_consts.pm:263 #: network/adsl_consts.pm:271 network/adsl_consts.pm:279 #: network/adsl_consts.pm:287 network/adsl_consts.pm:295 #: network/adsl_consts.pm:303 network/adsl_consts.pm:311 #, c-format msgid "China" msgstr "Кітай" #: lang.pm:236 #, c-format msgid "Colombia" msgstr "Калюмбія" #: lang.pm:238 #, c-format msgid "Serbia & Montenegro" msgstr "Сэрбія і Чарнагорыя" #: lang.pm:239 #, c-format msgid "Cuba" msgstr "Куба" #: lang.pm:240 #, c-format msgid "Cape Verde" msgstr "Капа Вэрдэ" #: lang.pm:241 #, c-format msgid "Christmas Island" msgstr "Выспа Расства" #: lang.pm:242 #, c-format msgid "Cyprus" msgstr "Кіпар" #: lang.pm:245 #, c-format msgid "Djibouti" msgstr "Джыботу" #: lang.pm:246 network/adsl_consts.pm:327 #, c-format msgid "Denmark" msgstr "Данія" #: lang.pm:247 #, c-format msgid "Dominica" msgstr "Дамініка" #: lang.pm:248 #, c-format msgid "Dominican Republic" msgstr "Дамініканская Рэспубліка" #: lang.pm:249 network/adsl_consts.pm:30 #, c-format msgid "Algeria" msgstr "Альджыр" #: lang.pm:250 #, c-format msgid "Ecuador" msgstr "Эквадор" #: lang.pm:251 #, c-format msgid "Estonia" msgstr "Курляндыя" #: lang.pm:252 #, c-format msgid "Egypt" msgstr "Эгіпэт" #: lang.pm:253 #, c-format msgid "Western Sahara" msgstr "Заходняя Сахара" #: lang.pm:254 #, c-format msgid "Eritrea" msgstr "Эрытрыя" #: lang.pm:255 network/adsl_consts.pm:663 network/adsl_consts.pm:672 #: network/adsl_consts.pm:682 network/adsl_consts.pm:692 #: network/adsl_consts.pm:700 network/adsl_consts.pm:708 #: network/adsl_consts.pm:716 network/adsl_consts.pm:724 #: network/adsl_consts.pm:732 network/adsl_consts.pm:740 #: network/adsl_consts.pm:748 network/adsl_consts.pm:756 #: network/adsl_consts.pm:764 #, c-format msgid "Spain" msgstr "Гішпанія" #: lang.pm:256 #, c-format msgid "Ethiopia" msgstr "Эпіопія" #: lang.pm:257 network/adsl_consts.pm:335 #, c-format msgid "Finland" msgstr "Фінляндыя" #: lang.pm:258 #, c-format msgid "Fiji" msgstr "Хвіджі" #: lang.pm:259 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "" #: lang.pm:260 #, c-format msgid "Micronesia" msgstr "Мікранэзыян" #: lang.pm:261 #, c-format msgid "Faroe Islands" msgstr "Выспы Фаро" #: lang.pm:263 #, c-format msgid "Gabon" msgstr "Габон" #: lang.pm:264 network/adsl_consts.pm:836 network/adsl_consts.pm:846 #: network/netconnect.pm:52 #, c-format msgid "United Kingdom" msgstr "Злучанае Каралеўства" #: lang.pm:265 #, c-format msgid "Grenada" msgstr "Грэнада" #: lang.pm:266 #, c-format msgid "Georgia" msgstr "Грузыя" #: lang.pm:267 #, c-format msgid "French Guiana" msgstr "Француская Гвіяна" #: lang.pm:268 #, c-format msgid "Ghana" msgstr "Гана" #: lang.pm:269 #, c-format msgid "Gibraltar" msgstr "Гібралтар" #: lang.pm:270 #, c-format msgid "Greenland" msgstr "Грынляндыя" #: lang.pm:271 #, c-format msgid "Gambia" msgstr "Гамбія" #: lang.pm:272 #, c-format msgid "Guinea" msgstr "Гвінея" #: lang.pm:273 #, c-format msgid "Guadeloupe" msgstr "Гвадэлупа" #: lang.pm:274 #, c-format msgid "Equatorial Guinea" msgstr "Экватарыяльная Гвінэя" #: lang.pm:276 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "" #: lang.pm:277 #, c-format msgid "Guatemala" msgstr "Гватэмала" #: lang.pm:278 #, c-format msgid "Guam" msgstr "Гуам" #: lang.pm:279 #, c-format msgid "Guinea-Bissau" msgstr "Гвінэя-Бісаў" #: lang.pm:280 #, c-format msgid "Guyana" msgstr "Гайяна" #: lang.pm:281 #, c-format msgid "Hong Kong SAR (China)" msgstr "" #: lang.pm:282 #, fuzzy, c-format msgid "Heard and McDonald Islands" msgstr "Выспы Паўночнае Мар'яны" #: lang.pm:283 #, c-format msgid "Honduras" msgstr "Гандурас" #: lang.pm:284 #, c-format msgid "Croatia" msgstr "Харватыя" #: lang.pm:285 #, c-format msgid "Haiti" msgstr "Гаіці" #: lang.pm:287 #, c-format msgid "Indonesia" msgstr "Інданэзыя" #: lang.pm:288 network/adsl_consts.pm:471 standalone/drakxtv:47 #, c-format msgid "Ireland" msgstr "Ірляндыя" #: lang.pm:289 network/adsl_consts.pm:479 #, c-format msgid "Israel" msgstr "Габрэйшчына" #: lang.pm:290 #, c-format msgid "India" msgstr "Індыя" #: lang.pm:291 #, c-format msgid "British Indian Ocean Territory" msgstr "Брытанская тэрыторыя Індыйскага акіяна" #: lang.pm:292 #, c-format msgid "Iraq" msgstr "Ірак" #: lang.pm:293 #, c-format msgid "Iran" msgstr "Іран" #: lang.pm:294 #, c-format msgid "Iceland" msgstr "Ісьляндыя" #: lang.pm:296 #, c-format msgid "Jamaica" msgstr "Ямайка" #: lang.pm:297 #, c-format msgid "Jordan" msgstr "Іярданія" #: lang.pm:298 #, c-format msgid "Japan" msgstr "Японія" #: lang.pm:299 #, c-format msgid "Kenya" msgstr "Кенія" #: lang.pm:300 #, c-format msgid "Kyrgyzstan" msgstr "Кыргізтан" #: lang.pm:301 #, c-format msgid "Cambodia" msgstr "Камбоджа" #: lang.pm:302 #, c-format msgid "Kiribati" msgstr "Кірыбаці" #: lang.pm:303 #, c-format msgid "Comoros" msgstr "Камарас" #: lang.pm:304 #, c-format msgid "Saint Kitts and Nevis" msgstr "" #: lang.pm:305 #, c-format msgid "Korea (North)" msgstr "Паўночная Карэя" #: lang.pm:306 #, c-format msgid "Korea" msgstr "Карэя" #: lang.pm:307 #, c-format msgid "Kuwait" msgstr "Кувэйт" #: lang.pm:308 #, c-format msgid "Cayman Islands" msgstr "Кайманавыя выспы" #: lang.pm:309 #, c-format msgid "Kazakhstan" msgstr "Казахстан" #: lang.pm:310 #, c-format msgid "Laos" msgstr "Лаос" #: lang.pm:311 #, c-format msgid "Lebanon" msgstr "Лібанон" #: lang.pm:312 #, c-format msgid "Saint Lucia" msgstr "Санта Лючыя" #: lang.pm:313 #, c-format msgid "Liechtenstein" msgstr "Ліхтэнштайн" #: lang.pm:314 #, c-format msgid "Sri Lanka" msgstr "Шры Ланка" #: lang.pm:315 #, c-format msgid "Liberia" msgstr "Лібэрыя" #: lang.pm:316 #, c-format msgid "Lesotho" msgstr "Лісота" #: lang.pm:317 network/adsl_consts.pm:527 #, c-format msgid "Lithuania" msgstr "Жамойція" #: lang.pm:318 #, c-format msgid "Luxembourg" msgstr "Люксембург" #: lang.pm:319 #, c-format msgid "Latvia" msgstr "Лівонія" #: lang.pm:320 #, c-format msgid "Libya" msgstr "Лібія" #: lang.pm:321 network/adsl_consts.pm:535 #, c-format msgid "Morocco" msgstr "Марока" #: lang.pm:322 #, c-format msgid "Monaco" msgstr "Манака" #: lang.pm:323 #, c-format msgid "Moldova" msgstr "Малдова" #: lang.pm:324 #, c-format msgid "Madagascar" msgstr "Мадагаскар" #: lang.pm:325 #, c-format msgid "Marshall Islands" msgstr "Маршалавы выспы" #: lang.pm:326 #, c-format msgid "Macedonia" msgstr "Македонія" #: lang.pm:327 #, c-format msgid "Mali" msgstr "Малі" #: lang.pm:328 #, c-format msgid "Myanmar" msgstr "Маянмар" #: lang.pm:329 #, c-format msgid "Mongolia" msgstr "Манголія" #: lang.pm:330 #, c-format msgid "Northern Mariana Islands" msgstr "Выспы Паўночнае Мар'яны" #: lang.pm:331 #, c-format msgid "Martinique" msgstr "Марцінік" #: lang.pm:332 #, c-format msgid "Mauritania" msgstr "Маўрытанія" #: lang.pm:333 #, c-format msgid "Montserrat" msgstr "Мансэрат" #: lang.pm:334 #, c-format msgid "Malta" msgstr "Мальта" #: lang.pm:335 #, c-format msgid "Mauritius" msgstr "Марыціўс" #: lang.pm:336 #, c-format msgid "Maldives" msgstr "Мальды" #: lang.pm:337 #, c-format msgid "Malawi" msgstr "Маляві" #: lang.pm:338 #, c-format msgid "Mexico" msgstr "Мэксыка" #: lang.pm:339 #, c-format msgid "Malaysia" msgstr "Малазыя" #: lang.pm:340 #, c-format msgid "Mozambique" msgstr "Мазамбік" #: lang.pm:341 #, c-format msgid "Namibia" msgstr "Намібія" #: lang.pm:342 #, c-format msgid "New Caledonia" msgstr "Новая Калядонія" #: lang.pm:343 #, c-format msgid "Niger" msgstr "Нігер" #: lang.pm:344 #, c-format msgid "Norfolk Island" msgstr "Норфалскія выспы" #: lang.pm:345 #, c-format msgid "Nigeria" msgstr "Нігерыя" #: lang.pm:346 #, c-format msgid "Nicaragua" msgstr "Нікарагуа" #: lang.pm:349 #, c-format msgid "Nepal" msgstr "Нэпал" #: lang.pm:350 #, c-format msgid "Nauru" msgstr "Наўру" #: lang.pm:351 #, c-format msgid "Niue" msgstr "Ню" #: lang.pm:352 #, c-format msgid "New Zealand" msgstr "Новая Зэляндыя" #: lang.pm:353 #, c-format msgid "Oman" msgstr "Аман" #: lang.pm:354 #, c-format msgid "Panama" msgstr "Панама" #: lang.pm:355 #, c-format msgid "Peru" msgstr "Перу" #: lang.pm:356 #, c-format msgid "French Polynesia" msgstr "Француская Палінэзыя" #: lang.pm:357 #, c-format msgid "Papua New Guinea" msgstr "Папуа Новая Гвінэя" #: lang.pm:358 #, c-format msgid "Philippines" msgstr "Хвіліпіны" #: lang.pm:359 #, c-format msgid "Pakistan" msgstr "Пакістан" #: lang.pm:361 #, c-format msgid "Saint Pierre and Miquelon" msgstr "" #: lang.pm:362 #, c-format msgid "Pitcairn" msgstr "Паткаірн" #: lang.pm:363 #, c-format msgid "Puerto Rico" msgstr "Пуэрта Рыка" #: lang.pm:364 #, fuzzy, c-format msgid "Palestine" msgstr "Панэль" #: lang.pm:365 network/adsl_consts.pm:634 #, c-format msgid "Portugal" msgstr "Партугалія" #: lang.pm:366 #, c-format msgid "Paraguay" msgstr "Парагвай" #: lang.pm:367 #, c-format msgid "Palau" msgstr "Палаў" #: lang.pm:368 #, c-format msgid "Qatar" msgstr "Катар" #: lang.pm:369 #, c-format msgid "Reunion" msgstr "Перааб'яднаньне" #: lang.pm:370 #, c-format msgid "Romania" msgstr "Румынія" #: lang.pm:371 network/adsl_consts.pm:642 #, c-format msgid "Russia" msgstr "Расея" #: lang.pm:372 #, c-format msgid "Rwanda" msgstr "Руанда" #: lang.pm:373 #, c-format msgid "Saudi Arabia" msgstr "Савудаўская Арабія" #: lang.pm:374 #, c-format msgid "Solomon Islands" msgstr "Саламонавы выспы" #: lang.pm:375 #, c-format msgid "Seychelles" msgstr "Сейшэлы" #: lang.pm:376 #, c-format msgid "Sudan" msgstr "Судан" #: lang.pm:378 #, c-format msgid "Singapore" msgstr "Сынгапур" #: lang.pm:379 #, fuzzy, c-format msgid "Saint Helena" msgstr "Санта Лючыя" #: lang.pm:380 network/adsl_consts.pm:652 #, c-format msgid "Slovenia" msgstr "Славенія" #: lang.pm:381 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "" #: lang.pm:383 #, c-format msgid "Sierra Leone" msgstr "С'ера Ліонэ" #: lang.pm:384 #, c-format msgid "San Marino" msgstr "Сан Марына" #: lang.pm:385 #, c-format msgid "Senegal" msgstr "Сенегал" #: lang.pm:386 #, c-format msgid "Somalia" msgstr "Самалі" #: lang.pm:387 #, c-format msgid "Suriname" msgstr "Сарынам" #: lang.pm:388 #, c-format msgid "Sao Tome and Principe" msgstr "Саа Тамэ й Прынсыпэ" #: lang.pm:389 #, c-format msgid "El Salvador" msgstr "Эль Сальвадор" #: lang.pm:390 #, c-format msgid "Syria" msgstr "Сырыя" #: lang.pm:391 #, c-format msgid "Swaziland" msgstr "Швазіланд" #: lang.pm:392 #, c-format msgid "Turks and Caicos Islands" msgstr "Выспы Таркс і Кайкас" #: lang.pm:393 #, c-format msgid "Chad" msgstr "Чад" #: lang.pm:394 #, c-format msgid "French Southern Territories" msgstr "Паўднёвыя Францускія Тэрыторыі" #: lang.pm:395 #, c-format msgid "Togo" msgstr "Тога" #: lang.pm:396 network/adsl_consts.pm:806 #, c-format msgid "Thailand" msgstr "Тайланд" #: lang.pm:397 #, c-format msgid "Tajikistan" msgstr "Такжыкістан" #: lang.pm:398 #, c-format msgid "Tokelau" msgstr "Такелаў" #: lang.pm:399 #, c-format msgid "East Timor" msgstr "Усходні Тымор" #: lang.pm:400 #, c-format msgid "Turkmenistan" msgstr "Туркменістан" #: lang.pm:401 network/adsl_consts.pm:816 #, c-format msgid "Tunisia" msgstr "Тунісія" #: lang.pm:402 #, c-format msgid "Tonga" msgstr "Тонга" #: lang.pm:403 #, c-format msgid "Turkey" msgstr "Турцыя" #: lang.pm:404 #, c-format msgid "Trinidad and Tobago" msgstr "Трынідад і Табага" #: lang.pm:405 #, c-format msgid "Tuvalu" msgstr "Тувалю" #: lang.pm:407 #, c-format msgid "Tanzania" msgstr "Танзаныя" #: lang.pm:408 #, c-format msgid "Ukraine" msgstr "Украіна" #: lang.pm:409 #, c-format msgid "Uganda" msgstr "Уганда" #: lang.pm:410 #, c-format msgid "United States Minor Outlying Islands" msgstr "Няістотна блізкія да Злучаных штатаў выспы" #: lang.pm:412 #, c-format msgid "Uruguay" msgstr "Уругвай" #: lang.pm:413 #, c-format msgid "Uzbekistan" msgstr "Узбэкістан" #: lang.pm:414 #, fuzzy, c-format msgid "Vatican" msgstr "Латвійская:" #: lang.pm:415 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "" #: lang.pm:416 #, c-format msgid "Venezuela" msgstr "Венэсуэла" #: lang.pm:417 #, c-format msgid "Virgin Islands (British)" msgstr "" #: lang.pm:418 #, c-format msgid "Virgin Islands (U.S.)" msgstr "" #: lang.pm:419 #, c-format msgid "Vietnam" msgstr "Уэтнам" #: lang.pm:420 #, c-format msgid "Vanuatu" msgstr "Ванааці" #: lang.pm:421 #, c-format msgid "Wallis and Futuna" msgstr "" #: lang.pm:422 #, c-format msgid "Samoa" msgstr "Самоа" #: lang.pm:423 #, c-format msgid "Yemen" msgstr "Йемен" #: lang.pm:424 #, c-format msgid "Mayotte" msgstr "Майотэ" #: lang.pm:425 standalone/drakxtv:49 #, c-format msgid "South Africa" msgstr "Паўднёвая Афрыка" #: lang.pm:426 #, c-format msgid "Zambia" msgstr "Замбія" #: lang.pm:427 #, c-format msgid "Zimbabwe" msgstr "Зімбабве" #: lang.pm:1040 #, fuzzy, c-format msgid "You should install the following packages: %s" msgstr "Праблемы з усталяваннем пакету %s" #. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit" #: lang.pm:1043 standalone/scannerdrake:135 #, c-format msgid ", " msgstr ", " #: lang.pm:1094 #, c-format msgid "Welcome to %s" msgstr "Сардэчна запрашаем у %s" #: loopback.pm:31 #, c-format msgid "Circular mounts %s\n" msgstr "Манціраванне дыску %s\n" #: lvm.pm:111 #, c-format msgid "Remove the logical volumes first\n" msgstr "" #: modules/interactive.pm:21 standalone/drakconnect:1032 #, c-format msgid "Parameters" msgstr "Парамэтры" #: modules/interactive.pm:21 standalone/draksec:51 #, fuzzy, c-format msgid "NONE" msgstr "Той сама GNOME" #: modules/interactive.pm:22 #, fuzzy, c-format msgid "Module configuration" msgstr "Настройка IDE" #: modules/interactive.pm:22 #, fuzzy, c-format msgid "You can configure each parameter of the module here." msgstr "Тут Вы можаце настроіць зьнешні выгляд панэлі" #: modules/interactive.pm:63 #, c-format msgid "Found %s interfaces" msgstr "Знойдзены %s інтэрфейсы" #: modules/interactive.pm:64 #, c-format msgid "Do you have another one?" msgstr "Ці ёсць у вас іншы?" #: modules/interactive.pm:65 #, c-format msgid "Do you have any %s interfaces?" msgstr "Ці ёсць у вас %s інтэрфейс?" #: modules/interactive.pm:71 #, c-format msgid "See hardware info" msgstr "Гл. апісанне абсталявання" #: modules/interactive.pm:82 #, fuzzy, c-format msgid "Installing driver for USB controller" msgstr "Усталяванне драйверу для %s карты %s" #: modules/interactive.pm:83 #, fuzzy, c-format msgid "Installing driver for firewire controller %s" msgstr "Усталяванне драйверу для %s карты %s" #: modules/interactive.pm:84 #, fuzzy, c-format msgid "Installing driver for hard drive controller %s" msgstr "Усталяванне драйверу для %s карты %s" #: modules/interactive.pm:85 #, fuzzy, c-format msgid "Installing driver for ethernet controller %s" msgstr "Усталяванне драйверу для %s карты %s" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: modules/interactive.pm:96 #, c-format msgid "Installing driver for %s card %s" msgstr "Усталяванне драйверу для %s карты %s" #: modules/interactive.pm:99 #, c-format msgid "(module %s)" msgstr "(модуль %s)" #: modules/interactive.pm:109 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" #: modules/interactive.pm:115 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "Вы не можаце задаць опцыі модулю %s.\n" "Опцыі - у фармаце ‟імя=значэнне імя2=значэнне2 ...”.\n" "Напрыклад, ‟io=0x300 irq=7”" #: modules/interactive.pm:117 #, c-format msgid "Module options:" msgstr "Опцыі модулю:" #. -PO: the %s is the driver type (scsi, network, sound,...) #: modules/interactive.pm:130 #, c-format msgid "Which %s driver should I try?" msgstr "Які драйвер %s паспрабаваць?" #: modules/interactive.pm:139 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "У некаторых выпадках %s драйверу патрэбна некаторая дадатковая інфармацыя,\n" "але звычайна гэта не патрабуецца. Ці не жадаеце вы задаць для яго\n" "дадатковыя опцыі, ці дазволіце драйверу пратэсціраваць машыну\n" "ў пошуках неабходнай інфармацыі? Магчыма, тэсціраванне прывядзе\n" "да спынення камп'ютэру, але яно нічога не сапсуе." #: modules/interactive.pm:143 #, c-format msgid "Autoprobe" msgstr "Аўтапошук" #: modules/interactive.pm:143 #, c-format msgid "Specify options" msgstr "Пазначце параметры" #: modules/interactive.pm:155 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "Загрузка модулю %s не прайшла.\n" "Жадаеце паспрабаваць з іншымі параметрамі?" #: modules/parameters.pm:49 #, fuzzy, c-format msgid "a number" msgstr "Нумар запісу" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated numbers" msgstr "" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated strings" msgstr "" #: modules/parameters.pm:53 #, c-format msgid "comma separated numbers" msgstr "" #: modules/parameters.pm:53 #, fuzzy, c-format msgid "comma separated strings" msgstr "Фарматаванне раздзелаў" #: mouse.pm:25 #, c-format msgid "Sun - Mouse" msgstr "Sun - Мыш" #: mouse.pm:31 security/level.pm:12 #, c-format msgid "Standard" msgstr "Стандартны" #: mouse.pm:32 #, c-format msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: mouse.pm:33 #, fuzzy, c-format msgid "Generic PS2 Wheel Mouse" msgstr "Звычайная мыш з 2 кнопкамі" #: mouse.pm:34 #, c-format msgid "GlidePoint" msgstr "GlidePoint" #: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60 #: network/modem.pm:85 network/modem.pm:99 network/modem.pm:104 #: network/modem.pm:137 network/netconnect.pm:645 network/netconnect.pm:650 #: network/netconnect.pm:662 network/netconnect.pm:667 #: network/netconnect.pm:683 network/netconnect.pm:685 #, c-format msgid "Automatic" msgstr "Аўтаматычна" #: mouse.pm:39 mouse.pm:73 #, c-format msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: mouse.pm:40 mouse.pm:68 #, c-format msgid "Genius NetMouse" msgstr "Genius NetMouse" #: mouse.pm:41 #, c-format msgid "Genius NetScroll" msgstr "Genius NetScroll" #: mouse.pm:42 mouse.pm:52 #, fuzzy, c-format msgid "Microsoft Explorer" msgstr "Microsoft IntelliMouse" #: mouse.pm:47 mouse.pm:79 #, fuzzy, c-format msgid "1 button" msgstr "3 кнопкі" #: mouse.pm:48 mouse.pm:57 #, c-format msgid "Generic 2 Button Mouse" msgstr "Звычайная мыш з 2 кнопкамі" #: mouse.pm:50 mouse.pm:59 #, fuzzy, c-format msgid "Generic 3 Button Mouse with Wheel emulation" msgstr "Звычайная мыш з 3 кнопкамі" #: mouse.pm:51 #, c-format msgid "Wheel" msgstr "З колам" #: mouse.pm:55 #, c-format msgid "serial" msgstr "паслядоўная" #: mouse.pm:58 #, c-format msgid "Generic 3 Button Mouse" msgstr "Звычайная мыш з 3 кнопкамі" #: mouse.pm:60 #, c-format msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: mouse.pm:61 #, c-format msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: mouse.pm:62 #, fuzzy, c-format msgid "Logitech MouseMan with Wheel emulation" msgstr "Logitech MouseMan" #: mouse.pm:63 #, c-format msgid "Mouse Systems" msgstr "Mouse Systems" #: mouse.pm:65 #, c-format msgid "Logitech CC Series" msgstr "Logitech CC Series" #: mouse.pm:66 #, fuzzy, c-format msgid "Logitech CC Series with Wheel emulation" msgstr "Logitech CC Series" #: mouse.pm:67 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: mouse.pm:69 #, c-format msgid "MM Series" msgstr "MM Series" #: mouse.pm:70 #, c-format msgid "MM HitTablet" msgstr "MM HitTablet" #: mouse.pm:71 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech Mouse (паслядоўная, стары тып C7)" #: mouse.pm:72 #, fuzzy, c-format msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" msgstr "Logitech Mouse (паслядоўная, стары тып C7)" #: mouse.pm:74 #, fuzzy, c-format msgid "Kensington Thinking Mouse with Wheel emulation" msgstr "Kensington Thinking Mouse" #: mouse.pm:77 #, fuzzy, c-format msgid "busmouse" msgstr "Няма мышы" #: mouse.pm:80 #, c-format msgid "2 buttons" msgstr "2 кнопкі" #: mouse.pm:81 #, c-format msgid "3 buttons" msgstr "3 кнопкі" #: mouse.pm:82 #, c-format msgid "3 buttons with Wheel emulation" msgstr "" #: mouse.pm:86 #, c-format msgid "Universal" msgstr "Агульнае" #: mouse.pm:88 #, c-format msgid "Any PS/2 & USB mice" msgstr "" #: mouse.pm:89 #, fuzzy, c-format msgid "Microsoft Xbox Controller S" msgstr "Microsoft IntelliMouse" #: mouse.pm:89 mouse.pm:359 mouse.pm:368 mouse.pm:420 #, c-format msgid "Synaptics Touchpad" msgstr "" #: mouse.pm:93 standalone/drakconnect:360 standalone/drakvpn:1140 #, c-format msgid "none" msgstr "няма" #: mouse.pm:95 #, c-format msgid "No mouse" msgstr "Няма мышы" #: mouse.pm:546 #, c-format msgid "Please test the mouse" msgstr "Калі ласка, зрабіце некалькі рухаў мышшу." #: mouse.pm:548 #, fuzzy, c-format msgid "To activate the mouse," msgstr "Калі ласка, зрабіце некалькі рухаў мышшу." #: mouse.pm:549 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "Рушце колам мышы!" #: network/adsl.pm:19 #, c-format msgid "use PPPoE" msgstr "выкарыстоўваць PPPoE" #: network/adsl.pm:20 #, fuzzy, c-format msgid "use PPTP" msgstr "выкарыстоўваць PPPoE" #: network/adsl.pm:21 #, c-format msgid "use DHCP" msgstr "" #: network/adsl.pm:22 #, c-format msgid "Alcatel Speedtouch USB" msgstr "" #: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24 #, c-format msgid " - detected" msgstr "" #: network/adsl.pm:23 #, c-format msgid "Sagem (using PPPoA) USB" msgstr "" #: network/adsl.pm:24 #, c-format msgid "Sagem (using DHCP) USB" msgstr "" #: network/adsl.pm:35 network/netconnect.pm:839 #, c-format msgid "Connect to the Internet" msgstr "Далучэнне да Інтэрнэту" #: network/adsl.pm:36 network/netconnect.pm:840 #, c-format msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use PPTP, a few use DHCP.\n" "If you do not know, choose 'use PPPoE'" msgstr "" #: network/adsl.pm:41 network/netconnect.pm:844 #, fuzzy, c-format msgid "ADSL connection type:" msgstr "Дзеяньні" #: network/drakfirewall.pm:12 share/compssUsers.pl:84 #, fuzzy, c-format msgid "Web Server" msgstr "Сервак" #: network/drakfirewall.pm:17 #, fuzzy, c-format msgid "Domain Name Server" msgstr "Імя дамену" #: network/drakfirewall.pm:22 #, fuzzy, c-format msgid "SSH server" msgstr "X сэервер" #: network/drakfirewall.pm:27 #, fuzzy, c-format msgid "FTP server" msgstr "X сэервер" #: network/drakfirewall.pm:32 #, fuzzy, c-format msgid "Mail Server" msgstr "Сервак" #: network/drakfirewall.pm:37 #, c-format msgid "POP and IMAP Server" msgstr "" #: network/drakfirewall.pm:42 #, fuzzy, c-format msgid "Telnet server" msgstr "X сэервер" #: network/drakfirewall.pm:48 #, c-format msgid "Windows Files Sharing (SMB)" msgstr "" #: network/drakfirewall.pm:54 #, fuzzy, c-format msgid "CUPS server" msgstr "Аддалены сэервер CUPS" #: network/drakfirewall.pm:60 #, c-format msgid "Echo request (ping)" msgstr "" #: network/drakfirewall.pm:65 #, c-format msgid "BitTorrent" msgstr "" #: network/drakfirewall.pm:131 #, fuzzy, c-format msgid "No network card" msgstr "Паказаць акно сеткі" #: network/drakfirewall.pm:152 #, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrakelinux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" #: network/drakfirewall.pm:158 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" #: network/drakfirewall.pm:175 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "" #: network/drakfirewall.pm:176 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n" "Have a look at /etc/services for information." msgstr "" #: network/drakfirewall.pm:182 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535.\n" "\n" "You can also give a range of ports (eg: 24300:24350/udp)" msgstr "" #: network/drakfirewall.pm:192 #, c-format msgid "Everything (no firewall)" msgstr "" #: network/drakfirewall.pm:194 #, fuzzy, c-format msgid "Other ports" msgstr "Парты вываду:" #: network/isdn.pm:125 network/netconnect.pm:490 network/netconnect.pm:602 #: network/netconnect.pm:605 #, c-format msgid "Unlisted - edit manually" msgstr "" #: network/isdn.pm:168 network/netconnect.pm:422 #, c-format msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: network/isdn.pm:168 network/netconnect.pm:422 #, c-format msgid "I do not know" msgstr "Не вядома" #: network/isdn.pm:169 network/netconnect.pm:422 #, c-format msgid "PCI" msgstr "PCI" #: network/isdn.pm:170 network/netconnect.pm:422 #, c-format msgid "USB" msgstr "USB" #: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60 #: network/netconnect.pm:650 network/netconnect.pm:667 #: network/netconnect.pm:683 #, fuzzy, c-format msgid "Manual" msgstr "Студзень" #: network/netconnect.pm:90 network/netconnect.pm:519 #: network/netconnect.pm:523 #, c-format msgid "Manual choice" msgstr "" #: network/netconnect.pm:90 #, c-format msgid "Internal ISDN card" msgstr "Унутраная ISDN карта" #: network/netconnect.pm:100 #, c-format msgid "Ad-hoc" msgstr "" #: network/netconnect.pm:101 #, fuzzy, c-format msgid "Managed" msgstr "Мэнэджэр файлаў" #: network/netconnect.pm:102 #, fuzzy, c-format msgid "Master" msgstr "Прайгравальнік дыскаў" #: network/netconnect.pm:103 #, fuzzy, c-format msgid "Repeater" msgstr "Цыклічна" #: network/netconnect.pm:104 #, fuzzy, c-format msgid "Secondary" msgstr "Нядзеля" #: network/netconnect.pm:105 #, c-format msgid "Auto" msgstr "Аўтаматычна" #: network/netconnect.pm:108 printer/printerdrake.pm:1354 #: standalone/drakups:75 #, fuzzy, c-format msgid "Manual configuration" msgstr "Захаваць канфігурацыю меню" #: network/netconnect.pm:109 #, c-format msgid "Automatic IP (BOOTP/DHCP)" msgstr "" #: network/netconnect.pm:111 #, c-format msgid "Automatic IP (BOOTP/DHCP/Zeroconf)" msgstr "" #: network/netconnect.pm:114 #, c-format msgid "Protocol for the rest of the world" msgstr "" #: network/netconnect.pm:116 standalone/drakconnect:541 #, c-format msgid "European protocol (EDSS1)" msgstr "" #: network/netconnect.pm:117 standalone/drakconnect:542 #, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" #: network/netconnect.pm:153 #, c-format msgid "Alcatel speedtouch USB modem" msgstr "" #: network/netconnect.pm:154 #, c-format msgid "Sagem USB modem" msgstr "" #: network/netconnect.pm:155 #, fuzzy, c-format msgid "Bewan modem" msgstr "Рэжым злучэння" #: network/netconnect.pm:156 #, c-format msgid "ECI Hi-Focus modem" msgstr "" #: network/netconnect.pm:160 #, fuzzy, c-format msgid "Dynamic Host Configuration Protocol (DHCP)" msgstr "Канфігурацыя сістэмных сэрвісаў" #: network/netconnect.pm:161 #, fuzzy, c-format msgid "Manual TCP/IP configuration" msgstr "Канфігурацыя" #: network/netconnect.pm:162 #, c-format msgid "Point to Point Tunneling Protocol (PPTP)" msgstr "" #: network/netconnect.pm:163 #, c-format msgid "PPP over Ethernet (PPPoE)" msgstr "" #: network/netconnect.pm:164 #, c-format msgid "PPP over ATM (PPPoA)" msgstr "" #: network/netconnect.pm:165 #, c-format msgid "DSL over CAPI" msgstr "" #: network/netconnect.pm:169 #, c-format msgid "Bridged Ethernet LLC" msgstr "" #: network/netconnect.pm:170 #, c-format msgid "Bridged Ethernet VC" msgstr "" #: network/netconnect.pm:171 #, c-format msgid "Routed IP LLC" msgstr "" #: network/netconnect.pm:172 #, c-format msgid "Routed IP VC" msgstr "" #: network/netconnect.pm:173 #, c-format msgid "PPPoA LLC" msgstr "" #: network/netconnect.pm:174 #, c-format msgid "PPPoA VC" msgstr "" #: network/netconnect.pm:178 standalone/drakconnect:476 #, c-format msgid "Script-based" msgstr "на аснове скрыпту" #: network/netconnect.pm:179 standalone/drakconnect:476 #, c-format msgid "PAP" msgstr "PAP" #: network/netconnect.pm:180 standalone/drakconnect:476 #, c-format msgid "Terminal-based" msgstr "на аснове тэрміналу" #: network/netconnect.pm:181 standalone/drakconnect:476 #, c-format msgid "CHAP" msgstr "CHAP" #: network/netconnect.pm:182 standalone/drakconnect:476 #, fuzzy, c-format msgid "PAP/CHAP" msgstr "CHAP" #: network/netconnect.pm:238 standalone/drakconnect:59 #, fuzzy, c-format msgid "Network & Internet Configuration" msgstr "Канфігурацыя сеткі" #: network/netconnect.pm:244 #, c-format msgid "(detected on port %s)" msgstr "" #. -PO: here, "(detected)" string will be appended to eg "ADSL connection" #: network/netconnect.pm:246 #, c-format msgid "(detected %s)" msgstr "" #: network/netconnect.pm:246 #, c-format msgid "(detected)" msgstr "" #: network/netconnect.pm:248 #, fuzzy, c-format msgid "Modem connection" msgstr "Размеркаванне" #: network/netconnect.pm:249 #, fuzzy, c-format msgid "ISDN connection" msgstr "Дзеяньні" #: network/netconnect.pm:250 #, fuzzy, c-format msgid "ADSL connection" msgstr "Дзеяньні" #: network/netconnect.pm:251 #, fuzzy, c-format msgid "Cable connection" msgstr "Размеркаванне" #: network/netconnect.pm:252 #, fuzzy, c-format msgid "LAN connection" msgstr "Дзеяньні" #: network/netconnect.pm:253 network/netconnect.pm:267 #, fuzzy, c-format msgid "Wireless connection" msgstr "Канфігурацыя" #: network/netconnect.pm:263 #, fuzzy, c-format msgid "Choose the connection you want to configure" msgstr "Выбар раздзелаў для фарматавання" #: network/netconnect.pm:277 #, c-format msgid "" "We are now going to configure the %s connection.\n" "\n" "\n" "Press \"%s\" to continue." msgstr "" #: network/netconnect.pm:285 network/netconnect.pm:879 #, c-format msgid "Connection Configuration" msgstr "Настройка далучэння да Інтэрнэту" #: network/netconnect.pm:286 network/netconnect.pm:880 #, c-format msgid "Please fill or check the field below" msgstr "Калі ласка, запоўніце ці пазначце поле ніжэй" #: network/netconnect.pm:293 standalone/drakconnect:532 #, c-format msgid "Card IRQ" msgstr "IRQ карты" #: network/netconnect.pm:294 standalone/drakconnect:533 #, c-format msgid "Card mem (DMA)" msgstr "Адрасы памяці карты (DMA)" #: network/netconnect.pm:295 standalone/drakconnect:534 #, c-format msgid "Card IO" msgstr "IO карты" #: network/netconnect.pm:296 standalone/drakconnect:535 #, c-format msgid "Card IO_0" msgstr "IO_0 карты" #: network/netconnect.pm:297 #, c-format msgid "Card IO_1" msgstr "IO_1 карты" #: network/netconnect.pm:298 #, c-format msgid "Your personal phone number" msgstr "Ваш асабісты тэлефонны нумар" #: network/netconnect.pm:299 network/netconnect.pm:883 #, c-format msgid "Provider name (ex provider.net)" msgstr "Імя правайдару, напрыклад правайдар.net" #: network/netconnect.pm:300 standalone/drakconnect:471 #, c-format msgid "Provider phone number" msgstr "Нумар тэлефону правайдара" #: network/netconnect.pm:301 #, fuzzy, c-format msgid "Provider DNS 1 (optional)" msgstr "Опцыі прынтэру" #: network/netconnect.pm:302 #, fuzzy, c-format msgid "Provider DNS 2 (optional)" msgstr "Опцыі прынтэру" #: network/netconnect.pm:303 standalone/drakconnect:422 #, c-format msgid "Dialing mode" msgstr "Рэжым злучэння" #: network/netconnect.pm:304 standalone/drakconnect:427 #: standalone/drakconnect:495 #, fuzzy, c-format msgid "Connection speed" msgstr "Імя злучэння" #: network/netconnect.pm:305 standalone/drakconnect:432 #, fuzzy, c-format msgid "Connection timeout (in sec)" msgstr "Настройка далучэння да Інтэрнэту" #: network/netconnect.pm:308 network/netconnect.pm:329 #: network/netconnect.pm:886 standalone/drakconnect:469 #, c-format msgid "Account Login (user name)" msgstr "Імя для ўваходу (імя карыстальніку)" #: network/netconnect.pm:309 network/netconnect.pm:330 #: network/netconnect.pm:887 standalone/drakconnect:470 #, c-format msgid "Account Password" msgstr "Пароль для ўваходу" #: network/netconnect.pm:325 #, fuzzy, c-format msgid "Cable: account options" msgstr "Дазволіць тэрмін дзеяньня запісу" #: network/netconnect.pm:328 #, c-format msgid "Use BPALogin (needed for Telstra)" msgstr "" #: network/netconnect.pm:362 network/netconnect.pm:715 #: network/netconnect.pm:920 #, fuzzy, c-format msgid "Select the network interface to configure:" msgstr "Пазначце сеткавы інтэрфейс" #: network/netconnect.pm:364 network/netconnect.pm:412 #: network/netconnect.pm:716 network/netconnect.pm:922 #: network/netconnect.pm:1091 network/shorewall.pm:98 #: standalone/drakconnect:684 standalone/drakgw:224 standalone/drakvpn:221 #, fuzzy, c-format msgid "Net Device" msgstr "Прылада" #: network/netconnect.pm:365 network/netconnect.pm:373 #, fuzzy, c-format msgid "External ISDN modem" msgstr "Унутраная ISDN карта" #: network/netconnect.pm:411 standalone/harddrake2:210 #, fuzzy, c-format msgid "Select a device!" msgstr "Абярыце файл" #: network/netconnect.pm:420 network/netconnect.pm:430 #: network/netconnect.pm:440 network/netconnect.pm:473 #: network/netconnect.pm:487 #, c-format msgid "ISDN Configuration" msgstr "Настройка ISDN" #: network/netconnect.pm:421 #, c-format msgid "What kind of card do you have?" msgstr "Які тып карты вы маеце?" #: network/netconnect.pm:431 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "Калі вы маеце ISA карту, велічыні на наступным экране павінны быць " "сапраўднымі.\n" "\n" "Калі вы маеце PCMCIA карту, вы павінны ведаць irq і io вашай карты.\n" #: network/netconnect.pm:435 #, c-format msgid "Continue" msgstr "Працягнуць" #: network/netconnect.pm:435 #, c-format msgid "Abort" msgstr "Адмяніць" #: network/netconnect.pm:441 #, c-format msgid "Which of the following is your ISDN card?" msgstr "" #: network/netconnect.pm:459 #, c-format msgid "" "A CAPI driver is available for this modem. This CAPI driver can offer more " "capabilities than the free driver (like sending faxes). Which driver do you " "want to use?" msgstr "" #: network/netconnect.pm:461 standalone/drakconnect:116 standalone/drakups:247 #: standalone/harddrake2:131 #, c-format msgid "Driver" msgstr "Драйвэр" #: network/netconnect.pm:473 #, c-format msgid "Which protocol do you want to use?" msgstr "Які пратакол вы жадаеце выкарыстоўваць?" #: network/netconnect.pm:475 standalone/drakconnect:116 #: standalone/drakconnect:309 standalone/drakconnect:540 #: standalone/drakvpn:1142 #, c-format msgid "Protocol" msgstr "Пратакол" #: network/netconnect.pm:487 #, c-format msgid "" "Select your provider.\n" "If it is not listed, choose Unlisted." msgstr "" "Абярыце вашага правайдара.\n" "калі яго няма ў гэтым спісе, абярыце тып ‟Іншы”" #: network/netconnect.pm:489 network/netconnect.pm:601 #: network/netconnect.pm:757 #, fuzzy, c-format msgid "Provider:" msgstr "Прынтэр" #: network/netconnect.pm:504 #, c-format msgid "" "Your modem is not supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" #: network/netconnect.pm:516 #, fuzzy, c-format msgid "Select the modem to configure:" msgstr "Пазначце карыстальнікаў каб аб'яднаць у гэтыю групу" #: network/netconnect.pm:568 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "Да якога паслядоўнага порту далучаны мадэм?" #: network/netconnect.pm:599 #, c-format msgid "Select your provider:" msgstr "" #: network/netconnect.pm:627 #, fuzzy, c-format msgid "Dialup: account options" msgstr "Дазволіць тэрмін дзеяньня запісу" #: network/netconnect.pm:630 #, c-format msgid "Connection name" msgstr "Імя злучэння" #: network/netconnect.pm:631 #, c-format msgid "Phone number" msgstr "Нумар тэлефону" #: network/netconnect.pm:632 #, c-format msgid "Login ID" msgstr "Імя (login ID)" #: network/netconnect.pm:647 network/netconnect.pm:680 #, fuzzy, c-format msgid "Dialup: IP parameters" msgstr "Настроіць проксі сэрвэры" #: network/netconnect.pm:650 #, fuzzy, c-format msgid "IP parameters" msgstr "Інтэрнэт" #: network/netconnect.pm:651 network/netconnect.pm:1018 #: printer/printerdrake.pm:454 standalone/drakconnect:116 #: standalone/drakconnect:325 standalone/drakconnect:879 #: standalone/drakups:282 #, c-format msgid "IP address" msgstr "IP адрас" #: network/netconnect.pm:652 #, fuzzy, c-format msgid "Subnet mask" msgstr "Маска сеткі" #: network/netconnect.pm:664 #, c-format msgid "Dialup: DNS parameters" msgstr "" #: network/netconnect.pm:667 #, c-format msgid "DNS" msgstr "" #: network/netconnect.pm:668 #, c-format msgid "Domain name" msgstr "Імя дамену" #: network/netconnect.pm:669 network/netconnect.pm:884 #: standalone/drakconnect:997 #, c-format msgid "First DNS Server (optional)" msgstr "" #: network/netconnect.pm:670 network/netconnect.pm:885 #: standalone/drakconnect:998 #, fuzzy, c-format msgid "Second DNS Server (optional)" msgstr "Канфігурацыя сістэмных сэрвісаў" #: network/netconnect.pm:671 #, c-format msgid "Set hostname from IP" msgstr "" #: network/netconnect.pm:683 standalone/drakconnect:336 #, c-format msgid "Gateway" msgstr "Шлюз" #: network/netconnect.pm:684 #, fuzzy, c-format msgid "Gateway IP address" msgstr "IP адрас" #: network/netconnect.pm:715 #, fuzzy, c-format msgid "ADSL configuration" msgstr "Настройка ISDN" #: network/netconnect.pm:755 #, fuzzy, c-format msgid "Please choose your ADSL provider" msgstr "калі ласка, пазначце тып вашай мышы." #: network/netconnect.pm:773 #, c-format msgid "" "You need the Alcatel microcode.\n" "You can provide it now via a floppy or your windows partition,\n" "or skip and do it later." msgstr "" #: network/netconnect.pm:777 network/netconnect.pm:782 #, fuzzy, c-format msgid "Use a floppy" msgstr "Захаванне на дыскету" #: network/netconnect.pm:777 network/netconnect.pm:786 #, fuzzy, c-format msgid "Use my Windows partition" msgstr "Вылічэнне межаў файлавай сістэмы Windows" #: network/netconnect.pm:777 network/netconnect.pm:789 #, fuzzy, c-format msgid "Do it later" msgstr "Аб'яднанае стэрыа" #: network/netconnect.pm:796 #, c-format msgid "Firmware copy failed, file %s not found" msgstr "" #: network/netconnect.pm:803 #, c-format msgid "Firmware copy succeeded" msgstr "" #: network/netconnect.pm:818 #, c-format msgid "" "You need the Alcatel microcode.\n" "Download it at:\n" "%s\n" "and copy the mgmt.o in /usr/share/speedtouch" msgstr "" #: network/netconnect.pm:889 #, c-format msgid "Virtual Path ID (VPI):" msgstr "" #: network/netconnect.pm:890 #, c-format msgid "Virtual Circuit ID (VCI):" msgstr "" #: network/netconnect.pm:893 #, c-format msgid "Encapsulation:" msgstr "" #: network/netconnect.pm:910 #, c-format msgid "" "The ECI Hi-Focus modem cannot be supported due to binary driver distribution " "problem.\n" "\n" "You can find a driver on http://eciadsl.flashtux.org/" msgstr "" #: network/netconnect.pm:922 #, c-format msgid "Manually load a driver" msgstr "" #: network/netconnect.pm:922 #, c-format msgid "Use a Windows driver (with ndiswrapper)" msgstr "" #: network/netconnect.pm:940 #, c-format msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Modifying the fields below will override this configuration.\n" "Do you really want to reconfigure this device?" msgstr "" #: network/netconnect.pm:954 network/netconnect.pm:1436 #, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "\n" msgstr "" #: network/netconnect.pm:971 #, c-format msgid "Zeroconf hostname resolution" msgstr "" #: network/netconnect.pm:972 network/netconnect.pm:1005 #, fuzzy, c-format msgid "Configuring network device %s (driver %s)" msgstr "Настрйка драйверу Solaris" #: network/netconnect.pm:973 #, c-format msgid "" "The following protocols can be used to configure an ethernet connection. " "Please choose the one you want to use" msgstr "" #: network/netconnect.pm:1006 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "Калі ласка, увядзіце IP канфігурацыю для вашай машыны.\n" "Кожны пункт павінен быць запоўнены як IP адрас ў дзесяткова-кропкавай \n" "натацыі (напрыклад, 1.2.3.4)." #: network/netconnect.pm:1013 #, c-format msgid "Assign host name from DHCP address" msgstr "" #: network/netconnect.pm:1014 #, fuzzy, c-format msgid "DHCP host name" msgstr "Імя машыны" #: network/netconnect.pm:1019 standalone/drakconnect:330 #: standalone/drakconnect:880 standalone/drakgw:320 #, c-format msgid "Netmask" msgstr "Маска сеткі" #: network/netconnect.pm:1021 standalone/drakconnect:415 #, c-format msgid "Track network card id (useful for laptops)" msgstr "" #: network/netconnect.pm:1022 standalone/drakconnect:416 #, fuzzy, c-format msgid "Network Hotplugging" msgstr "Сетка" #: network/netconnect.pm:1024 standalone/drakconnect:410 #, c-format msgid "Start at boot" msgstr "" #: network/netconnect.pm:1027 standalone/drakconnect:883 #, c-format msgid "DHCP client" msgstr "" #: network/netconnect.pm:1041 standalone/drakconnect:389 #, fuzzy, c-format msgid "DHCP timeout (in seconds)" msgstr "Настройка далучэння да Інтэрнэту" #: network/netconnect.pm:1042 standalone/drakconnect:392 #, fuzzy, c-format msgid "Get DNS servers from DHCP" msgstr "IP сэервера SMB" #: network/netconnect.pm:1043 #, c-format msgid "Get YP servers from DHCP" msgstr "" #: network/netconnect.pm:1044 #, c-format msgid "Get NTPD servers from DHCP" msgstr "" #: network/netconnect.pm:1037 printer/printerdrake.pm:1605 #: standalone/drakconnect:649 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "IP адрас павінен быць у фармаце 1.2.3.4" #: network/netconnect.pm:1057 standalone/drakconnect:686 #, fuzzy, c-format msgid "Netmask should be in format 255.255.224.0" msgstr "IP адрас павінен быць у фармаце 1.2.3.4" #: network/netconnect.pm:1041 #, c-format msgid "Warning: IP address %s is usually reserved!" msgstr "" #: network/netconnect.pm:1046 standalone/drakTermServ:1742 #: standalone/drakTermServ:1743 standalone/drakTermServ:1744 #, fuzzy, c-format msgid "%s already in use\n" msgstr "%s ужо знойдзены " #: network/netconnect.pm:1067 #, fuzzy, c-format msgid "Choose an ndiswrapper driver" msgstr "X сэервер" #: network/netconnect.pm:1068 network/netconnect.pm:1075 #, fuzzy, c-format msgid "Install a new driver" msgstr "Усталяванне сістэмы" #: network/netconnect.pm:1068 #, fuzzy, c-format msgid "Use already installed driver (%s)" msgstr "(ужо дададзена %s)" #: network/netconnect.pm:1072 printer/printerdrake.pm:3644 #, c-format msgid "Could not install the %s package!" msgstr "" #: network/netconnect.pm:1076 #, c-format msgid "Please select the Windows driver (.inf file)" msgstr "" #: network/netconnect.pm:1126 network/netconnect.pm:1155 #, c-format msgid "Please enter the wireless parameters for this card:" msgstr "" #: network/netconnect.pm:1129 standalone/drakconnect:382 #, fuzzy, c-format msgid "Operating Mode" msgstr "Рэжым злучэння" #: network/netconnect.pm:1131 standalone/drakconnect:383 #, c-format msgid "Network name (ESSID)" msgstr "" #: network/netconnect.pm:1132 standalone/drakconnect:384 #, fuzzy, c-format msgid "Network ID" msgstr "Сетка" #: network/netconnect.pm:1133 standalone/drakconnect:385 #, c-format msgid "Operating frequency" msgstr "" #: network/netconnect.pm:1134 standalone/drakconnect:386 #, c-format msgid "Sensitivity threshold" msgstr "" #: network/netconnect.pm:1135 standalone/drakconnect:387 #, fuzzy, c-format msgid "Bitrate (in b/s)" msgstr "Бітрэйт: %d kb/s" #: network/netconnect.pm:1141 #, c-format msgid "Use Wi-Fi Protected Access (WPA)" msgstr "" #: network/netconnect.pm:1168 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" #: network/netconnect.pm:1145 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" #: network/netconnect.pm:1158 standalone/drakconnect:398 #, c-format msgid "RTS/CTS" msgstr "" #: network/netconnect.pm:1159 #, c-format msgid "" "RTS/CTS adds a handshake before each packet transmission to make sure that " "the\n" "channel is clear. This adds overhead, but increase performance in case of " "hidden\n" "nodes or large number of active nodes. This parameter sets the size of the\n" "smallest packet for which the node sends RTS, a value equal to the maximum\n" "packet size disable the scheme. You may also set this parameter to auto, " "fixed\n" "or off." msgstr "" #: network/netconnect.pm:1166 standalone/drakconnect:399 #, fuzzy, c-format msgid "Fragmentation" msgstr "Аўтэнтыфікацыя" #: network/netconnect.pm:1167 standalone/drakconnect:400 #, c-format msgid "Iwconfig command extra arguments" msgstr "" #: network/netconnect.pm:1168 #, c-format msgid "" "Here, one can configure some extra wireless parameters such as:\n" "ap, channel, commit, enc, power, retry, sens, txpower (nick is already set " "as the hostname).\n" "\n" "See iwconfig(8) man page for further information." msgstr "" #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one #: network/netconnect.pm:1175 standalone/drakconnect:401 #, c-format msgid "Iwspy command extra arguments" msgstr "" #: network/netconnect.pm:1176 #, c-format msgid "" "Iwspy is used to set a list of addresses in a wireless network\n" "interface and to read back quality of link information for each of those.\n" "\n" "This information is the same as the one available in /proc/net/wireless :\n" "quality of the link, signal strength and noise level.\n" "\n" "See iwpspy(8) man page for further information." msgstr "" #: network/netconnect.pm:1184 standalone/drakconnect:402 #, c-format msgid "Iwpriv command extra arguments" msgstr "" #: network/netconnect.pm:1185 #, c-format msgid "" "Iwpriv enable to set up optionals (private) parameters of a wireless " "network\n" "interface.\n" "\n" "Iwpriv deals with parameters and setting specific to each driver (as opposed " "to\n" "iwconfig which deals with generic ones).\n" "\n" "In theory, the documentation of each device driver should indicate how to " "use\n" "those interface specific commands and their effect.\n" "\n" "See iwpriv(8) man page for further information." msgstr "" #: network/netconnect.pm:1259 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" "Увядзіце імя сваёй машыны (host).\n" "Імя вашай машыны павінна быць зададзена поўнасцю,\n" "напрыклад ‟mybox.mylab.myco.com”.\n" "Вы можаце таксама ўвесці IP адрас шлюзу, калі ён у вас ёсць." #: network/netconnect.pm:1263 #, c-format msgid "Last but not least you can also type in your DNS server IP addresses." msgstr "" #: network/netconnect.pm:1265 standalone/drakconnect:996 #, fuzzy, c-format msgid "Host name (optional)" msgstr "Імя машыны" #: network/netconnect.pm:1265 #, c-format msgid "Host name" msgstr "Імя машыны" #: network/netconnect.pm:1267 #, fuzzy, c-format msgid "DNS server 1" msgstr "NIS сэервер:" #: network/netconnect.pm:1268 #, fuzzy, c-format msgid "DNS server 2" msgstr "NIS сэервер:" #: network/netconnect.pm:1269 #, fuzzy, c-format msgid "DNS server 3" msgstr "NIS сэервер:" #: network/netconnect.pm:1270 #, fuzzy, c-format msgid "Search domain" msgstr "Шукаць: " #: network/netconnect.pm:1271 #, c-format msgid "By default search domain will be set from the fully-qualified host name" msgstr "" #: network/netconnect.pm:1272 #, c-format msgid "Gateway (e.g. %s)" msgstr "" #: network/netconnect.pm:1274 #, c-format msgid "Gateway device" msgstr "Прылада-шлюз" #: network/netconnect.pm:1283 #, fuzzy, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "IP адрас павінен быць у фармаце 1.2.3.4" #: network/netconnect.pm:1288 standalone/drakconnect:652 #, fuzzy, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "IP адрас павінен быць у фармаце 1.2.3.4" #: network/netconnect.pm:1299 #, c-format msgid "" "If desired, enter a Zeroconf hostname.\n" "This is the name your machine will use to advertise any of\n" "its shared resources that are not managed by the network.\n" "It is not necessary on most networks." msgstr "" #: network/netconnect.pm:1303 #, fuzzy, c-format msgid "Zeroconf Host name" msgstr "Імя машыны" #: network/netconnect.pm:1306 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "" #: network/netconnect.pm:1316 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" #: network/netconnect.pm:1318 #, fuzzy, c-format msgid "Internet connection" msgstr "Сумеснае Інтэрнэт-злучэнне" #: network/netconnect.pm:1326 #, fuzzy, c-format msgid "Configuration is complete, do you want to apply settings?" msgstr "Якую канфігурацыю Xorg вы жадаеце атрымаць?" #: network/netconnect.pm:1336 #, fuzzy, c-format msgid "Do you want to allow users to start the connection?" msgstr "Вы жадаеце, каб гэтае злучэнне стартавала пры загрузцы?" #: network/netconnect.pm:1345 #, c-format msgid "Do you want to start the connection at boot?" msgstr "Вы жадаеце, каб гэтае злучэнне стартавала пры загрузцы?" #: network/netconnect.pm:1354 #, fuzzy, c-format msgid "Automatically at boot" msgstr "Аўтаматычны" #: network/netconnect.pm:1356 #, c-format msgid "By using Net Applet in the system tray" msgstr "" #: network/netconnect.pm:1358 #, c-format msgid "Manually (the interface would still be activated at boot)" msgstr "" #: network/netconnect.pm:1367 #, fuzzy, c-format msgid "How do you want to dial this connection?" msgstr "Вы жадаеце, каб гэтае злучэнне стартавала пры загрузцы?" #: network/netconnect.pm:1380 #, fuzzy, c-format msgid "The network needs to be restarted. Do you want to restart it?" msgstr "Зьмяненьні не былі захаваныя. Ці жадаеце працягнуць?" #: network/netconnect.pm:1387 network/netconnect.pm:1452 #, c-format msgid "Network Configuration" msgstr "Канфігурацыя сеткі" #: network/netconnect.pm:1388 #, c-format msgid "" "A problem occurred while restarting the network: \n" "\n" "%s" msgstr "" #: network/netconnect.pm:1396 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "Ці жадаеце зараз паспрабаваць далучыцца да Інтэрнэту?" #: network/netconnect.pm:1404 standalone/drakconnect:1028 #, c-format msgid "Testing your connection..." msgstr "" #: network/netconnect.pm:1420 #, fuzzy, c-format msgid "The system is now connected to the Internet." msgstr "Далучэнне да Інтэрнэту" #: network/netconnect.pm:1421 #, c-format msgid "For security reasons, it will be disconnected now." msgstr "" #: network/netconnect.pm:1422 #, c-format msgid "" "The system does not seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" #: network/netconnect.pm:1439 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" #: network/netconnect.pm:1440 #, c-format msgid "" "Problems occurred during configuration.\n" "Test your connection via net_monitor or mcc. If your connection does not " "work, you might want to relaunch the configuration." msgstr "" #: network/netconnect.pm:1453 #, c-format msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" #: network/netconnect.pm:1491 #, c-format msgid "" "An unexpected error has happened:\n" "%s" msgstr "" #: network/network.pm:319 #, c-format msgid "Proxies configuration" msgstr "Настройка proxy кэшуючых сэервераў" #: network/network.pm:320 #, c-format msgid "HTTP proxy" msgstr "HTTP proxy" #: network/network.pm:321 #, c-format msgid "FTP proxy" msgstr "FTP proxy" #: network/network.pm:324 #, c-format msgid "Proxy should be http://..." msgstr "Proxy павінен быць http://..." #: network/network.pm:325 #, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "" #: network/shorewall.pm:25 #, c-format msgid "Firewalling configuration detected!" msgstr "Знойдзена сістэма сеткавай бяспекі (firewall)!" #: network/shorewall.pm:26 #, c-format msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fixes after installation." msgstr "" "Увага! Знойдзена існуючая сістэма сеткавай бяспекі (firewall). Вам магчыма " "спатрэбіцца скарэктаваць яе пасля ўсталявання." #: network/shorewall.pm:91 standalone/drakgw:217 standalone/drakvpn:214 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" msgstr "" #: network/tools.pm:181 #, fuzzy, c-format msgid "Insert floppy" msgstr "Усталёўка" #: network/tools.pm:182 #, c-format msgid "" "Insert a FAT formatted floppy in drive %s with %s in root directory and " "press %s" msgstr "" #: network/tools.pm:187 #, fuzzy, c-format msgid "Floppy access error, unable to mount device %s" msgstr "Куды вы жадаеце манціраваць прыладу %s?" #: partition_table.pm:397 #, c-format msgid "mount failed: " msgstr "памылка манціравання: " #: partition_table.pm:502 #, c-format msgid "Extended partition not supported on this platform" msgstr "Пашыраны раздзел не падтрымліваецца гэтай платформай" #: partition_table.pm:520 #, c-format msgid "" "You have a hole in your partition table but I can not use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "Вы маеце дзірку ў табліцы радзелаў, але я не маю магчымасці яе скарыстаць.\n" "Адзіны выхад у тым, каб перамясціць першасныя раздзелы так, каб дзірка ішла\n" "адразу за пашыраным (extended) раздзелам" #: partition_table.pm:611 #, c-format msgid "Restoring from file %s failed: %s" msgstr "Аднаўленне з файла %s не атрымалася: %s" #: partition_table.pm:613 #, c-format msgid "Bad backup file" msgstr "Дрэнны файл рэзервовай копіі" #: partition_table.pm:633 #, c-format msgid "Error writing to file %s" msgstr "Памылка запісу ў файл %s" #: partition_table/raw.pm:240 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" #: pkgs.pm:23 #, c-format msgid "must have" msgstr "павінны мець" #: pkgs.pm:24 #, c-format msgid "important" msgstr "важна" #: pkgs.pm:25 #, c-format msgid "very nice" msgstr "вельмі добра" #: pkgs.pm:26 #, c-format msgid "nice" msgstr "добра" #: pkgs.pm:27 #, c-format msgid "maybe" msgstr "можа быць" #: pkgs.pm:474 #, fuzzy, c-format msgid "Downloading file %s..." msgstr "Вызначэнне прыладаў..." #: printer/cups.pm:103 #, fuzzy, c-format msgid "(on %s)" msgstr "(модуль %s)" #: printer/cups.pm:103 #, c-format msgid "(on this machine)" msgstr "" #: printer/cups.pm:115 standalone/printerdrake:187 #, fuzzy, c-format msgid "Configured on other machines" msgstr "Настроіць панэль" #: printer/cups.pm:117 #, fuzzy, c-format msgid "On CUPS server \"%s\"" msgstr "Аддалены сэервер CUPS" #: printer/cups.pm:117 printer/printerdrake.pm:4650 #: printer/printerdrake.pm:4660 printer/printerdrake.pm:4805 #: printer/printerdrake.pm:4816 printer/printerdrake.pm:5011 #, c-format msgid " (Default)" msgstr " (Па дамаўленню)" #: printer/data.pm:56 #, c-format msgid "PDQ - Print, Do not Queue" msgstr "" #: printer/data.pm:57 #, c-format msgid "PDQ" msgstr "" #: printer/data.pm:69 #, c-format msgid "LPD - Line Printer Daemon" msgstr "" #: printer/data.pm:70 #, c-format msgid "LPD" msgstr "" #: printer/data.pm:91 #, c-format msgid "LPRng - LPR New Generation" msgstr "" #: printer/data.pm:92 #, c-format msgid "LPRng" msgstr "" #: printer/data.pm:117 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "" #: printer/data.pm:147 #, c-format msgid "CUPS - Common Unix Printing System (remote server)" msgstr "" #: printer/data.pm:148 #, fuzzy, c-format msgid "Remote CUPS" msgstr "Аддалены сэервер CUPS" #: printer/detect.pm:153 printer/detect.pm:236 printer/detect.pm:438 #: printer/detect.pm:475 #, fuzzy, c-format msgid "Unknown Model" msgstr "Невядомая гукавая карта" #: printer/main.pm:27 #, c-format msgid "Local printer" msgstr "Лакальны прынтэр" #: printer/main.pm:28 #, c-format msgid "Remote printer" msgstr "Аддалены прынтэр" #: printer/main.pm:29 #, fuzzy, c-format msgid "Printer on remote CUPS server" msgstr "Аддалены сэервер CUPS" #: printer/main.pm:30 printer/printerdrake.pm:1628 #, fuzzy, c-format msgid "Printer on remote lpd server" msgstr "Сервер друку" #: printer/main.pm:31 #, c-format msgid "Network printer (TCP/Socket)" msgstr "Сеткавы прынтэр (TCP/Socket)" #: printer/main.pm:32 #, c-format msgid "Printer on SMB/Windows 95/98/NT server" msgstr "" #: printer/main.pm:33 #, fuzzy, c-format msgid "Printer on NetWare server" msgstr "Сервер друку" #: printer/main.pm:34 printer/printerdrake.pm:1632 #, fuzzy, c-format msgid "Enter a printer device URI" msgstr "URI прынтэру" #: printer/main.pm:35 #, c-format msgid "Pipe job into a command" msgstr "" #. Translation of the "(recommended)" in printer driver entries #: printer/main.pm:45 #, c-format msgid "recommended" msgstr "пажадана" #: printer/main.pm:324 printer/main.pm:629 printer/main.pm:1664 #: printer/main.pm:2699 printer/main.pm:2708 printer/printerdrake.pm:903 #: printer/printerdrake.pm:2094 printer/printerdrake.pm:5048 #, fuzzy, c-format msgid "Unknown model" msgstr "Невядомая гукавая карта" #: printer/main.pm:349 standalone/printerdrake:186 #, fuzzy, c-format msgid "Configured on this machine" msgstr "Настроіць панэль" #: printer/main.pm:355 printer/printerdrake.pm:1175 #, c-format msgid " on parallel port #%s" msgstr "" #: printer/main.pm:358 printer/printerdrake.pm:1178 #, fuzzy, c-format msgid ", USB printer #%s" msgstr "пашырэнне OSS %s" #: printer/main.pm:360 #, fuzzy, c-format msgid ", USB printer" msgstr "Імя друкаркі" #: printer/main.pm:364 #, fuzzy, c-format msgid ", HP printer on a parallel port" msgstr "Друкаркі ў выглядзе значак" #: printer/main.pm:366 #, fuzzy, c-format msgid ", HP printer on USB" msgstr "Друкаркі ў выглядзе значак" #: printer/main.pm:368 #, fuzzy, c-format msgid ", HP printer on HP JetDirect" msgstr "Друкаркі ў выглядзе значак" #: printer/main.pm:370 #, fuzzy, c-format msgid ", HP printer" msgstr "Прынтэр" #: printer/main.pm:376 #, c-format msgid ", multi-function device on parallel port #%s" msgstr "" #: printer/main.pm:379 #, c-format msgid ", multi-function device on a parallel port" msgstr "" #: printer/main.pm:381 #, c-format msgid ", multi-function device on USB" msgstr "" #: printer/main.pm:383 #, c-format msgid ", multi-function device on HP JetDirect" msgstr "" #: printer/main.pm:385 #, c-format msgid ", multi-function device" msgstr "" #: printer/main.pm:389 #, fuzzy, c-format msgid ", printing to %s" msgstr "Памылка запісу ў файл %s" #: printer/main.pm:392 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr "" #: printer/main.pm:395 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr "" #: printer/main.pm:400 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "" #: printer/main.pm:405 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr "" #: printer/main.pm:408 #, c-format msgid ", using command %s" msgstr "" #: printer/main.pm:423 #, c-format msgid "Parallel port #%s" msgstr "" #: printer/main.pm:426 printer/printerdrake.pm:1196 #: printer/printerdrake.pm:1223 printer/printerdrake.pm:1241 #, fuzzy, c-format msgid "USB printer #%s" msgstr "пашырэнне OSS %s" #: printer/main.pm:428 #, fuzzy, c-format msgid "USB printer" msgstr "USB прылады" #: printer/main.pm:432 #, c-format msgid "HP printer on a parallel port" msgstr "" #: printer/main.pm:434 #, fuzzy, c-format msgid "HP printer on USB" msgstr "Друкаркі ў выглядзе значак" #: printer/main.pm:436 #, fuzzy, c-format msgid "HP printer on HP JetDirect" msgstr "Друкаркі ў выглядзе значак" #: printer/main.pm:438 #, fuzzy, c-format msgid "HP printer" msgstr "Прынтэр" #: printer/main.pm:444 #, c-format msgid "Multi-function device on parallel port #%s" msgstr "" #: printer/main.pm:447 #, c-format msgid "Multi-function device on a parallel port" msgstr "" #: printer/main.pm:449 #, c-format msgid "Multi-function device on USB" msgstr "" #: printer/main.pm:451 #, c-format msgid "Multi-function device on HP JetDirect" msgstr "" #: printer/main.pm:453 #, c-format msgid "Multi-function device" msgstr "" #: printer/main.pm:457 #, fuzzy, c-format msgid "Prints into %s" msgstr "Заданьні друку" #: printer/main.pm:460 #, c-format msgid "LPD server \"%s\", printer \"%s\"" msgstr "" #: printer/main.pm:463 #, c-format msgid "TCP/IP host \"%s\", port %s" msgstr "" #: printer/main.pm:468 #, c-format msgid "SMB/Windows server \"%s\", share \"%s\"" msgstr "" #: printer/main.pm:473 #, c-format msgid "Novell server \"%s\", printer \"%s\"" msgstr "" #: printer/main.pm:476 #, fuzzy, c-format msgid "Uses command %s" msgstr "Порт" #: printer/main.pm:478 #, c-format msgid "URI: %s" msgstr "URI: %s" #: printer/main.pm:626 printer/printerdrake.pm:849 #: printer/printerdrake.pm:2861 #, c-format msgid "Raw printer (No driver)" msgstr "" #: printer/main.pm:1176 printer/printerdrake.pm:205 #: printer/printerdrake.pm:217 #, fuzzy, c-format msgid "Local network(s)" msgstr "Прагляд лякальнай сеткі" #: printer/main.pm:1178 printer/printerdrake.pm:221 #, fuzzy, c-format msgid "Interface \"%s\"" msgstr "Сеткавыя інтэрфэйсы" #: printer/main.pm:1180 #, fuzzy, c-format msgid "Network %s" msgstr "Сетка" #: printer/main.pm:1182 #, fuzzy, c-format msgid "Host %s" msgstr "Хост:" #: printer/main.pm:1211 #, c-format msgid "%s (Port %s)" msgstr "" #: printer/printerdrake.pm:19 #, c-format msgid "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned " "on. Download the Windows driver package from the HP web site (the firmware " "on the printer's CD does not work) and extract the firmware file from it by " "decompressing the self-extracting '.exe' file with the 'unzip' utility and " "searching for the 'sihp1000.img' file. Copy this file into the '/etc/" "printer' directory. There it will be found by the automatic uploader script " "and uploaded whenever the printer is connected and turned on.\n" msgstr "" #: printer/printerdrake.pm:61 #, fuzzy, c-format msgid "CUPS printer configuration" msgstr "Настройка прылд OSS" #: printer/printerdrake.pm:62 #, c-format msgid "" "Here you can choose whether the printers connected to this machine should be " "accessible by remote machines and by which remote machines." msgstr "" #: printer/printerdrake.pm:63 #, c-format msgid "" "You can also decide here whether printers on remote machines should be " "automatically made available on this machine." msgstr "" #: printer/printerdrake.pm:66 #, c-format msgid "The printers on this machine are available to other computers" msgstr "" #: printer/printerdrake.pm:71 #, c-format msgid "Automatically find available printers on remote machines" msgstr "" #: printer/printerdrake.pm:76 #, fuzzy, c-format msgid "Printer sharing on hosts/networks: " msgstr "Адлучэнне ад сеткі" #: printer/printerdrake.pm:78 #, fuzzy, c-format msgid "Custom configuration" msgstr "Канфігурацыя" #: printer/printerdrake.pm:83 standalone/scannerdrake:593 #: standalone/scannerdrake:610 #, fuzzy, c-format msgid "No remote machines" msgstr "Выкарыстаць выдалены хост" #: printer/printerdrake.pm:94 #, fuzzy, c-format msgid "Additional CUPS servers: " msgstr "Дадатковае праграмаванне:" #: printer/printerdrake.pm:101 #, c-format msgid "" "To get access to printers on remote CUPS servers in your local network you " "only need to turn on the \"Automatically find available printers on remote " "machines\" option; the CUPS servers inform your machine automatically about " "their printers. All printers currently known to your machine are listed in " "the \"Remote printers\" section in the main window of Printerdrake. If your " "CUPS server(s) is/are not in your local network, you have to enter the IP " "address(es) and optionally the port number(s) here to get the printer " "information from the server(s)." msgstr "" #: printer/printerdrake.pm:109 #, c-format msgid "Japanese text printing mode" msgstr "" #: printer/printerdrake.pm:110 #, c-format msgid "" "Turning on this allows to print plain text files in Japanese language. Only " "use this function if you really want to print text in Japanese, if it is " "activated you cannot print accentuated characters in latin fonts any more " "and you will not be able to adjust the margins, the character size, etc. " "This setting only affects printers defined on this machine. If you want to " "print Japanese text on a printer set up on a remote machine, you have to " "activate this function on that remote machine." msgstr "" #: printer/printerdrake.pm:117 #, fuzzy, c-format msgid "Automatic correction of CUPS configuration" msgstr "Настройка далучэння да Інтэрнэту" #: printer/printerdrake.pm:119 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically " "made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" " "as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, " "but then you have to take care of these points." msgstr "" #: printer/printerdrake.pm:132 printer/printerdrake.pm:500 #: printer/printerdrake.pm:4292 #, c-format msgid "Remote CUPS server and no local CUPS daemon" msgstr "" #: printer/printerdrake.pm:135 #, c-format msgid "On" msgstr "Укл." #: printer/printerdrake.pm:137 printer/printerdrake.pm:492 #: printer/printerdrake.pm:519 #, c-format msgid "Off" msgstr "Выкл" #: printer/printerdrake.pm:138 printer/printerdrake.pm:501 #, c-format msgid "" "In this mode the local CUPS daemon will be stopped and all printing requests " "go directly to the server specified below. Note that it is not possible to " "define local print queues then and if the specified server is down it cannot " "be printed at all from this machine." msgstr "" #: printer/printerdrake.pm:155 printer/printerdrake.pm:230 #, fuzzy, c-format msgid "Sharing of local printers" msgstr "Лакальны прынтэр" #: printer/printerdrake.pm:156 #, c-format msgid "" "These are the machines and networks on which the locally connected printer" "(s) should be available:" msgstr "" #: printer/printerdrake.pm:167 #, c-format msgid "Add host/network" msgstr "" #: printer/printerdrake.pm:173 #, fuzzy, c-format msgid "Edit selected host/network" msgstr "Рэдагаваць вылучаны радок" #: printer/printerdrake.pm:182 #, c-format msgid "Remove selected host/network" msgstr "" #: printer/printerdrake.pm:213 printer/printerdrake.pm:223 #: printer/printerdrake.pm:235 printer/printerdrake.pm:242 #: printer/printerdrake.pm:273 printer/printerdrake.pm:291 #, c-format msgid "IP address of host/network:" msgstr "" #: printer/printerdrake.pm:231 #, c-format msgid "" "Choose the network or host on which the local printers should be made " "available:" msgstr "" #: printer/printerdrake.pm:238 #, c-format msgid "Host/network IP address missing." msgstr "" #: printer/printerdrake.pm:246 #, c-format msgid "The entered host/network IP is not correct.\n" msgstr "" #: printer/printerdrake.pm:247 printer/printerdrake.pm:423 #, c-format msgid "Examples for correct IPs:\n" msgstr "" #: printer/printerdrake.pm:271 #, c-format msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "" #: printer/printerdrake.pm:340 printer/printerdrake.pm:410 #, c-format msgid "Accessing printers on remote CUPS servers" msgstr "" #: printer/printerdrake.pm:341 #, c-format msgid "" "Add here the CUPS servers whose printers you want to use. You only need to " "do this if the servers do not broadcast their printer information into the " "local network." msgstr "" #: printer/printerdrake.pm:352 #, fuzzy, c-format msgid "Add server" msgstr "Дадаць карыстальніка" #: printer/printerdrake.pm:358 #, fuzzy, c-format msgid "Edit selected server" msgstr "Рэдагаваць вылучаны радок" #: printer/printerdrake.pm:367 #, fuzzy, c-format msgid "Remove selected server" msgstr "/Выдаліць/Выбранае" #: printer/printerdrake.pm:411 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "" #: printer/printerdrake.pm:412 #, c-format msgid "If no port is given, 631 will be taken as default." msgstr "" #: printer/printerdrake.pm:416 #, c-format msgid "Server IP missing!" msgstr "" #: printer/printerdrake.pm:422 #, c-format msgid "The entered IP is not correct.\n" msgstr "" #: printer/printerdrake.pm:434 printer/printerdrake.pm:1852 #, c-format msgid "The port number should be an integer!" msgstr "" #: printer/printerdrake.pm:445 #, c-format msgid "This server is already in the list, it cannot be added again.\n" msgstr "" #: printer/printerdrake.pm:456 printer/printerdrake.pm:1873 #: standalone/drakups:247 standalone/harddrake2:50 #, c-format msgid "Port" msgstr "Порт" #: printer/printerdrake.pm:489 printer/printerdrake.pm:505 #: printer/printerdrake.pm:520 printer/printerdrake.pm:524 #: printer/printerdrake.pm:530 #, fuzzy, c-format msgid "On, Name or IP of remote server:" msgstr "Сервер друку" #: printer/printerdrake.pm:508 printer/printerdrake.pm:4301 #: printer/printerdrake.pm:4366 #, c-format msgid "CUPS server name or IP address missing." msgstr "" #: printer/printerdrake.pm:560 printer/printerdrake.pm:580 #: printer/printerdrake.pm:673 printer/printerdrake.pm:739 #: printer/printerdrake.pm:766 printer/printerdrake.pm:825 #: printer/printerdrake.pm:867 printer/printerdrake.pm:877 #: printer/printerdrake.pm:1926 printer/printerdrake.pm:2137 #: printer/printerdrake.pm:2169 printer/printerdrake.pm:2217 #: printer/printerdrake.pm:2269 printer/printerdrake.pm:2286 #: printer/printerdrake.pm:2330 printer/printerdrake.pm:2370 #: printer/printerdrake.pm:2420 printer/printerdrake.pm:2454 #: printer/printerdrake.pm:2464 printer/printerdrake.pm:2714 #: printer/printerdrake.pm:2719 printer/printerdrake.pm:2856 #: printer/printerdrake.pm:2966 printer/printerdrake.pm:3560 #: printer/printerdrake.pm:3625 printer/printerdrake.pm:3674 #: printer/printerdrake.pm:3677 printer/printerdrake.pm:3808 #: printer/printerdrake.pm:3908 printer/printerdrake.pm:3980 #: printer/printerdrake.pm:4001 printer/printerdrake.pm:4010 #: printer/printerdrake.pm:4104 printer/printerdrake.pm:4196 #: printer/printerdrake.pm:4202 printer/printerdrake.pm:4222 #: printer/printerdrake.pm:4328 printer/printerdrake.pm:4435 #: printer/printerdrake.pm:4454 printer/printerdrake.pm:4463 #: printer/printerdrake.pm:4477 printer/printerdrake.pm:4673 #: printer/printerdrake.pm:5109 printer/printerdrake.pm:5186 #: standalone/printerdrake:67 standalone/printerdrake:554 #, fuzzy, c-format msgid "Printerdrake" msgstr "Прынтэр" #: printer/printerdrake.pm:561 printer/printerdrake.pm:3909 #: printer/printerdrake.pm:4436 #, c-format msgid "Reading printer data..." msgstr "" #: printer/printerdrake.pm:581 #, c-format msgid "Restarting CUPS..." msgstr "" #: printer/printerdrake.pm:608 printer/printerdrake.pm:628 #, c-format msgid "Select Printer Connection" msgstr "Выбар тыпу злучэння прынтэру" #: printer/printerdrake.pm:609 #, c-format msgid "How is the printer connected?" msgstr "Як прынтар далучаны?" #: printer/printerdrake.pm:611 #, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these " "printers will be automatically detected." msgstr "" #: printer/printerdrake.pm:614 printer/printerdrake.pm:4675 #, c-format msgid "" "\n" "WARNING: No local network connection active, remote printers can neither be " "detected nor tested!" msgstr "" #: printer/printerdrake.pm:621 #, c-format msgid "" "Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)" msgstr "" #: printer/printerdrake.pm:623 #, c-format msgid "Modify timeout for network printer auto-detection" msgstr "" #: printer/printerdrake.pm:629 #, c-format msgid "Enter the timeout for network printer auto-detection (in msec) here. " msgstr "" #: printer/printerdrake.pm:631 #, c-format msgid "" "The longer you choose the timeout, the more reliable the detections of " "network printers will be, but the scan can take longer then, especially if " "there are many machines with local firewalls in the network. " msgstr "" #: printer/printerdrake.pm:635 #, fuzzy, c-format msgid "The timeout must be a positive integer number!" msgstr "Зрух мусіць быць станоўчым цэлым лікам!" #: printer/printerdrake.pm:673 #, c-format msgid "Checking your system..." msgstr "" #: printer/printerdrake.pm:690 #, fuzzy, c-format msgid "and one unknown printer" msgstr "Імя друкаркі" #: printer/printerdrake.pm:692 #, c-format msgid "and %d unknown printers" msgstr "" #: printer/printerdrake.pm:696 #, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" #: printer/printerdrake.pm:698 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" #: printer/printerdrake.pm:699 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "" #: printer/printerdrake.pm:703 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" #: printer/printerdrake.pm:704 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" #: printer/printerdrake.pm:707 #, c-format msgid "" "There are no printers found which are directly connected to your machine" msgstr "" #: printer/printerdrake.pm:710 #, c-format msgid " (Make sure that all your printers are connected and turned on).\n" msgstr "" #: printer/printerdrake.pm:723 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" #: printer/printerdrake.pm:724 #, c-format msgid "Do you want to enable printing on printers in the local network?\n" msgstr "" #: printer/printerdrake.pm:726 #, fuzzy, c-format msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "Вы жадаеце, каб гэтае злучэнне стартавала пры загрузцы?" #: printer/printerdrake.pm:727 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "" #: printer/printerdrake.pm:728 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" #: printer/printerdrake.pm:767 #, fuzzy, c-format msgid "Searching for new printers..." msgstr "Адшукаць файлы на дыску" #: printer/printerdrake.pm:826 #, fuzzy, c-format msgid "Found printer on %s..." msgstr "Аддалены прынтэр" #: printer/printerdrake.pm:851 #, c-format msgid "(" msgstr "(" #: printer/printerdrake.pm:852 #, c-format msgid " on " msgstr "" #: printer/printerdrake.pm:853 standalone/scannerdrake:137 #, c-format msgid ")" msgstr ")" #: printer/printerdrake.pm:858 printer/printerdrake.pm:2868 #, fuzzy, c-format msgid "Printer model selection" msgstr "Опцыі прынтэру" #: printer/printerdrake.pm:859 printer/printerdrake.pm:2869 #, fuzzy, c-format msgid "Which printer model do you have?" msgstr "Які тып карты вы маеце?" #: printer/printerdrake.pm:860 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please " "choose the correct model from the list." msgstr "" #: printer/printerdrake.pm:863 printer/printerdrake.pm:2874 #, c-format msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" #: printer/printerdrake.pm:868 #, fuzzy, c-format msgid "Configuring printer on %s..." msgstr "Настройка карт PCMCIA ..." #: printer/printerdrake.pm:878 printer/printerdrake.pm:4455 #, fuzzy, c-format msgid "Configuring printer \"%s\"..." msgstr "Настройка карт PCMCIA ..." #: printer/printerdrake.pm:1036 printer/printerdrake.pm:1048 #: printer/printerdrake.pm:1107 printer/printerdrake.pm:2103 #: printer/printerdrake.pm:2118 printer/printerdrake.pm:2188 #: printer/printerdrake.pm:4692 printer/printerdrake.pm:4861 #, fuzzy, c-format msgid "Add a new printer" msgstr "Дадаць новы пункт" #: printer/printerdrake.pm:1037 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" #: printer/printerdrake.pm:1050 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected. Also your network printer(s) and your Windows " "machines must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you do not " "need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: printer/printerdrake.pm:1059 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: printer/printerdrake.pm:1067 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you do not need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: printer/printerdrake.pm:1076 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: printer/printerdrake.pm:1085 #, c-format msgid "Auto-detect printers connected to this machine" msgstr "" #: printer/printerdrake.pm:1088 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "" #: printer/printerdrake.pm:1091 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" #: printer/printerdrake.pm:1108 #, fuzzy, c-format msgid "No auto-detection" msgstr "Аўтаматычнае вызначэнне" #: printer/printerdrake.pm:1173 #, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the %s Control Center." msgstr "" #: printer/printerdrake.pm:1143 printer/printerdrake.pm:1373 #: printer/printerdrake.pm:1435 printer/printerdrake.pm:1525 #: printer/printerdrake.pm:1663 printer/printerdrake.pm:1738 #: printer/printerdrake.pm:1890 printer/printerdrake.pm:1976 #: printer/printerdrake.pm:1985 printer/printerdrake.pm:1994 #: printer/printerdrake.pm:2005 printer/printerdrake.pm:2143 #: printer/printerdrake.pm:2229 printer/printerdrake.pm:2275 #: printer/printerdrake.pm:2342 printer/printerdrake.pm:2377 #, c-format msgid "Could not install the %s packages!" msgstr "" #: printer/printerdrake.pm:1145 #, c-format msgid "Skipping Windows/SMB server auto-detection" msgstr "" #: printer/printerdrake.pm:1151 printer/printerdrake.pm:1296 #: printer/printerdrake.pm:1531 printer/printerdrake.pm:1785 #, fuzzy, c-format msgid "Printer auto-detection" msgstr "Опцыі прынтэру" #: printer/printerdrake.pm:1151 #, c-format msgid "Detecting devices..." msgstr "Вызначэнне прыладаў..." #: printer/printerdrake.pm:1181 #, c-format msgid ", network printer \"%s\", port %s" msgstr "" #: printer/printerdrake.pm:1184 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr "" #: printer/printerdrake.pm:1188 #, fuzzy, c-format msgid "Detected %s" msgstr "Выдаліць вылучаны радок" #: printer/printerdrake.pm:1193 printer/printerdrake.pm:1220 #: printer/printerdrake.pm:1238 #, c-format msgid "Printer on parallel port #%s" msgstr "" #: printer/printerdrake.pm:1199 #, fuzzy, c-format msgid "Network printer \"%s\", port %s" msgstr "Сеткавы прынтэр (TCP/Socket)" #: printer/printerdrake.pm:1202 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "" #: printer/printerdrake.pm:1283 #, fuzzy, c-format msgid "Local Printer" msgstr "Лакальны прынтэр" #: printer/printerdrake.pm:1284 #, c-format msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" #: printer/printerdrake.pm:1288 #, c-format msgid "You must enter a device or file name!" msgstr "" #: printer/printerdrake.pm:1297 #, fuzzy, c-format msgid "No printer found!" msgstr "Імя друкаркі" #: printer/printerdrake.pm:1305 #, fuzzy, c-format msgid "Local Printers" msgstr "Лакальны прынтэр" #: printer/printerdrake.pm:1306 #, fuzzy, c-format msgid "Available printers" msgstr "Даступныя праграмы" #: printer/printerdrake.pm:1310 printer/printerdrake.pm:1319 #, c-format msgid "The following printer was auto-detected. " msgstr "" #: printer/printerdrake.pm:1312 #, c-format msgid "" "If it is not the one you want to configure, enter a device name/file name in " "the input line" msgstr "" #: printer/printerdrake.pm:1313 #, c-format msgid "" "Alternatively, you can specify a device name/file name in the input line" msgstr "" #: printer/printerdrake.pm:1314 printer/printerdrake.pm:1323 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "" #: printer/printerdrake.pm:1316 #, c-format msgid "" "Please choose the printer you want to set up or enter a device name/file " "name in the input line" msgstr "" #: printer/printerdrake.pm:1317 #, c-format msgid "" "Please choose the printer to which the print jobs should go or enter a " "device name/file name in the input line" msgstr "" #: printer/printerdrake.pm:1321 #, c-format msgid "" "The configuration of the printer will work fully automatically. If your " "printer was not correctly detected or if you prefer a customized printer " "configuration, turn on \"Manual configuration\"." msgstr "" #: printer/printerdrake.pm:1322 #, c-format msgid "Currently, no alternative possibility is available" msgstr "" #: printer/printerdrake.pm:1325 #, c-format msgid "" "Please choose the printer you want to set up. The configuration of the " "printer will work fully automatically. If your printer was not correctly " "detected or if you prefer a customized printer configuration, turn on " "\"Manual configuration\"." msgstr "" #: printer/printerdrake.pm:1326 #, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "" #: printer/printerdrake.pm:1328 #, c-format msgid "" "Please choose the port that your printer is connected to or enter a device " "name/file name in the input line" msgstr "" #: printer/printerdrake.pm:1329 #, fuzzy, c-format msgid "Please choose the port that your printer is connected to." msgstr "Калі ласка, пазначце послядоўны порт, да якога падключана вашая мыш." #: printer/printerdrake.pm:1331 #, c-format msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" #: printer/printerdrake.pm:1335 #, c-format msgid "You must choose/enter a printer/device!" msgstr "" #: printer/printerdrake.pm:1375 printer/printerdrake.pm:1437 #: printer/printerdrake.pm:1527 printer/printerdrake.pm:1665 #: printer/printerdrake.pm:1740 printer/printerdrake.pm:1892 #: printer/printerdrake.pm:1978 printer/printerdrake.pm:1987 #: printer/printerdrake.pm:1996 printer/printerdrake.pm:2007 #, fuzzy, c-format msgid "Aborting" msgstr "Адмяніць" #: printer/printerdrake.pm:1410 #, c-format msgid "Remote lpd Printer Options" msgstr "Опцыі аддаленага прынтэру lpd" #: printer/printerdrake.pm:1411 #, c-format msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" #: printer/printerdrake.pm:1412 #, fuzzy, c-format msgid "Remote host name" msgstr "Выкарыстаць выдалены хост" #: printer/printerdrake.pm:1413 #, fuzzy, c-format msgid "Remote printer name" msgstr "Аддалены прынтэр" #: printer/printerdrake.pm:1416 #, c-format msgid "Remote host name missing!" msgstr "" #: printer/printerdrake.pm:1420 #, fuzzy, c-format msgid "Remote printer name missing!" msgstr "Аддалены прынтэр" #: printer/printerdrake.pm:1449 printer/printerdrake.pm:2025 #: standalone/drakTermServ:445 standalone/drakTermServ:747 #: standalone/drakTermServ:764 standalone/drakTermServ:1480 #: standalone/drakTermServ:1488 standalone/drakTermServ:1500 #: standalone/drakbackup:512 standalone/drakbackup:618 #: standalone/drakbackup:653 standalone/drakbackup:773 #: standalone/harddrake2:256 #, c-format msgid "Information" msgstr "Інфармацыя" #: printer/printerdrake.pm:1449 printer/printerdrake.pm:2025 #, c-format msgid "Detected model: %s %s" msgstr "" #: printer/printerdrake.pm:1531 printer/printerdrake.pm:1785 #, c-format msgid "Scanning network..." msgstr "" #: printer/printerdrake.pm:1543 printer/printerdrake.pm:1564 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr "" #: printer/printerdrake.pm:1546 printer/printerdrake.pm:1567 #, fuzzy, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "Сервер друку" #: printer/printerdrake.pm:1588 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "Опцыі прынтэру SMB (Windows 9x/NT)" #: printer/printerdrake.pm:1589 #, c-format msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" #: printer/printerdrake.pm:1590 #, c-format msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" #: printer/printerdrake.pm:1592 #, c-format msgid "SMB server host" msgstr "Імя сэерверу SMB" #: printer/printerdrake.pm:1593 #, c-format msgid "SMB server IP" msgstr "IP сэервера SMB" #: printer/printerdrake.pm:1594 #, c-format msgid "Share name" msgstr "Імя для размеркаванага рэсурсу" #: printer/printerdrake.pm:1597 #, c-format msgid "Workgroup" msgstr "Працоўная група" #: printer/printerdrake.pm:1599 #, fuzzy, c-format msgid "Auto-detected" msgstr "Аўтаматычны" #: printer/printerdrake.pm:1609 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "" #: printer/printerdrake.pm:1613 #, c-format msgid "Samba share name missing!" msgstr "" #: printer/printerdrake.pm:1619 #, c-format msgid "SECURITY WARNING!" msgstr "" #: printer/printerdrake.pm:1620 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: printer/printerdrake.pm:1630 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: printer/printerdrake.pm:1633 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" #: printer/printerdrake.pm:1711 #, c-format msgid "NetWare Printer Options" msgstr "Опцыі прынтэру NetWare" #: printer/printerdrake.pm:1712 #, c-format msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" #: printer/printerdrake.pm:1713 #, c-format msgid "Printer Server" msgstr "Сервер друку" #: printer/printerdrake.pm:1714 #, c-format msgid "Print Queue Name" msgstr "Імя чаргі друку" #: printer/printerdrake.pm:1719 #, c-format msgid "NCP server name missing!" msgstr "" #: printer/printerdrake.pm:1723 #, c-format msgid "NCP queue name missing!" msgstr "" #: printer/printerdrake.pm:1797 printer/printerdrake.pm:1817 #, c-format msgid ", host \"%s\", port %s" msgstr "" #: printer/printerdrake.pm:1800 printer/printerdrake.pm:1820 #, c-format msgid "Host \"%s\", port %s" msgstr "" #: printer/printerdrake.pm:1841 #, fuzzy, c-format msgid "TCP/Socket Printer Options" msgstr "Опцыі прынтэру NetWare" #: printer/printerdrake.pm:1843 #, c-format msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) in the input fields." msgstr "" #: printer/printerdrake.pm:1844 #, c-format msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" #: printer/printerdrake.pm:1848 #, c-format msgid "Printer host name or IP missing!" msgstr "" #: printer/printerdrake.pm:1871 #, c-format msgid "Printer host name or IP" msgstr "" #: printer/printerdrake.pm:1927 #, fuzzy, c-format msgid "Refreshing Device URI list..." msgstr "Аднавіць сьпіс" #: printer/printerdrake.pm:1930 printer/printerdrake.pm:1932 #, c-format msgid "Printer Device URI" msgstr "URI прынтэру" #: printer/printerdrake.pm:1931 #, c-format msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" #: printer/printerdrake.pm:1957 #, c-format msgid "A valid URI must be entered!" msgstr "" #: printer/printerdrake.pm:2060 #, c-format msgid "Pipe into command" msgstr "" #: printer/printerdrake.pm:2061 #, c-format msgid "" "Here you can specify any arbitrary command line into which the job should be " "piped instead of being sent directly to a printer." msgstr "" #: printer/printerdrake.pm:2062 #, c-format msgid "Command line" msgstr "Загадны радок" #: printer/printerdrake.pm:2066 #, c-format msgid "A command line must be entered!" msgstr "" #: printer/printerdrake.pm:2104 #, c-format msgid "" "On many HP printers there are special functions available, maintenance (ink " "level checking, nozzle cleaning. head alignment, ...) on all not too old " "inkjets, scanning on multi-function devices, and memory card access on " "printers with card readers. " msgstr "" #: printer/printerdrake.pm:2106 #, c-format msgid "" "To access these extra functions on your HP printer, it must be set up with " "the appropriate software: " msgstr "" #: printer/printerdrake.pm:2107 #, c-format msgid "" "Either with the newer HPLIP which allows printer maintenance through the " "easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on " "newer PhotoSmart models " msgstr "" #: printer/printerdrake.pm:2108 #, c-format msgid "" "or with the older HPOJ which allows only scanner and memory card access, but " "could help you in case of failure of HPLIP. " msgstr "" #: printer/printerdrake.pm:2110 #, c-format msgid "What is your choice (choose \"None\" for non-HP printers)? " msgstr "" #: printer/printerdrake.pm:2111 printer/printerdrake.pm:2112 #: printer/printerdrake.pm:2138 printer/printerdrake.pm:2144 #: printer/printerdrake.pm:2170 #, fuzzy, c-format msgid "HPLIP" msgstr "PL_IP" #: printer/printerdrake.pm:2111 printer/printerdrake.pm:2114 #: printer/printerdrake.pm:2270 printer/printerdrake.pm:2276 #: printer/printerdrake.pm:2287 #, c-format msgid "HPOJ" msgstr "" #: printer/printerdrake.pm:2119 #, c-format msgid "" "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony " "IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?" msgstr "" #: printer/printerdrake.pm:2138 printer/printerdrake.pm:2270 #, c-format msgid "Installing %s package..." msgstr "Усталяванне пакету %s..." #: printer/printerdrake.pm:2145 printer/printerdrake.pm:2277 #, c-format msgid "Only printing will be possible on the %s." msgstr "" #: printer/printerdrake.pm:2160 #, fuzzy, c-format msgid "Could not remove your old HPOJ configuration file %s for your %s! " msgstr "Немагчыма стварыць тэчку наладак gnome для карыстальніка \"%s\": %s\n" #: printer/printerdrake.pm:2162 #, c-format msgid "Please remove the file manually and restart HPOJ." msgstr "" #: printer/printerdrake.pm:2170 printer/printerdrake.pm:2287 #, c-format msgid "Checking device and configuring %s..." msgstr "" #: printer/printerdrake.pm:2189 #, fuzzy, c-format msgid "Which printer do you want to set up with HPLIP?" msgstr "На які сектар перанесці?" #: printer/printerdrake.pm:2218 printer/printerdrake.pm:2331 #, fuzzy, c-format msgid "Installing SANE packages..." msgstr "Усталяванне пакету %s" #: printer/printerdrake.pm:2231 printer/printerdrake.pm:2344 #, c-format msgid "Scanning on the %s will not be possible." msgstr "" #: printer/printerdrake.pm:2246 #, c-format msgid "Using and Maintaining your %s" msgstr "" #: printer/printerdrake.pm:2371 #, fuzzy, c-format msgid "Installing mtools packages..." msgstr "Усталяванне пакету %s" #: printer/printerdrake.pm:2379 #, c-format msgid "Photo memory card access on the %s will not be possible." msgstr "" #: printer/printerdrake.pm:2395 #, c-format msgid "Scanning on your HP multi-function device" msgstr "" #: printer/printerdrake.pm:2404 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "" #: printer/printerdrake.pm:2421 #, fuzzy, c-format msgid "Configuring device..." msgstr "Настройка IDE" #: printer/printerdrake.pm:2455 #, c-format msgid "Making printer port available for CUPS..." msgstr "" #: printer/printerdrake.pm:2464 printer/printerdrake.pm:2715 #: printer/printerdrake.pm:2857 #, c-format msgid "Reading printer database..." msgstr "" #: printer/printerdrake.pm:2674 #, c-format msgid "Enter Printer Name and Comments" msgstr "" #: printer/printerdrake.pm:2678 printer/printerdrake.pm:3965 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "" #: printer/printerdrake.pm:2684 printer/printerdrake.pm:3970 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" #: printer/printerdrake.pm:2691 #, c-format msgid "" "The printer name \"%s\" has more than 12 characters which can make the " "printer unaccessible from Windows clients. Do you really want to use this " "name?" msgstr "" #: printer/printerdrake.pm:2700 #, c-format msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" #: printer/printerdrake.pm:2701 #, c-format msgid "Name of printer" msgstr "Імя друкаркі" #: printer/printerdrake.pm:2702 standalone/drakconnect:570 #: standalone/harddrake2:37 standalone/printerdrake:211 #: standalone/printerdrake:218 #, c-format msgid "Description" msgstr "Апісанне" #: printer/printerdrake.pm:2703 standalone/printerdrake:211 #: standalone/printerdrake:218 #, c-format msgid "Location" msgstr "Размеркаванне" #: printer/printerdrake.pm:2720 #, fuzzy, c-format msgid "Preparing printer database..." msgstr "Падрыхтоўка загрузчыка" #: printer/printerdrake.pm:2836 #, c-format msgid "Your printer model" msgstr "" #: printer/printerdrake.pm:2837 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" #: printer/printerdrake.pm:2842 printer/printerdrake.pm:2845 #, fuzzy, c-format msgid "The model is correct" msgstr "Гэта дакладна?" #: printer/printerdrake.pm:2843 printer/printerdrake.pm:2844 #: printer/printerdrake.pm:2847 #, fuzzy, c-format msgid "Select model manually" msgstr "Пазначыць карыстальніцкі ID" #: printer/printerdrake.pm:2870 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Find the correct model in the list when a wrong model or " "\"Raw printer\" is highlighted." msgstr "" #: printer/printerdrake.pm:2889 #, c-format msgid "Install a manufacturer-supplied PPD file" msgstr "" #: printer/printerdrake.pm:2920 #, c-format msgid "" "Every PostScript printer is delivered with a PPD file which describes the " "printer's options and features." msgstr "" #: printer/printerdrake.pm:2921 #, c-format msgid "" "This file is usually somewhere on the CD with the Windows and Mac drivers " "delivered with the printer." msgstr "" #: printer/printerdrake.pm:2922 #, c-format msgid "You can find the PPD files also on the manufacturer's web sites." msgstr "" #: printer/printerdrake.pm:2923 #, c-format msgid "" "If you have Windows installed on your machine, you can find the PPD file on " "your Windows partition, too." msgstr "" #: printer/printerdrake.pm:2924 #, c-format msgid "" "Installing the printer's PPD file and using it when setting up the printer " "makes all options of the printer available which are provided by the " "printer's hardware" msgstr "" #: printer/printerdrake.pm:2925 #, c-format msgid "" "Here you can choose the PPD file to be installed on your machine, it will " "then be used for the setup of your printer." msgstr "" #: printer/printerdrake.pm:2927 #, c-format msgid "Install PPD file from" msgstr "" #: printer/printerdrake.pm:2930 printer/printerdrake.pm:2938 #: standalone/scannerdrake:183 standalone/scannerdrake:192 #: standalone/scannerdrake:242 standalone/scannerdrake:250 #, fuzzy, c-format msgid "Floppy Disk" msgstr "Фарматаваць гнуткія дыскі" #: printer/printerdrake.pm:2931 printer/printerdrake.pm:2940 #: standalone/scannerdrake:184 standalone/scannerdrake:194 #: standalone/scannerdrake:243 standalone/scannerdrake:252 #, fuzzy, c-format msgid "Other place" msgstr "Іншае" #: printer/printerdrake.pm:2946 #, fuzzy, c-format msgid "Select PPD file" msgstr "Абярыце файл" #: printer/printerdrake.pm:2950 #, c-format msgid "The PPD file %s does not exist or is unreadable!" msgstr "" #: printer/printerdrake.pm:2956 #, c-format msgid "The PPD file %s does not conform with the PPD specifications!" msgstr "" #: printer/printerdrake.pm:2967 #, fuzzy, c-format msgid "Installing PPD file..." msgstr "Усталёўваем" #: printer/printerdrake.pm:3084 #, fuzzy, c-format msgid "OKI winprinter configuration" msgstr "Настройка прылд OSS" #: printer/printerdrake.pm:3085 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" #: printer/printerdrake.pm:3110 printer/printerdrake.pm:3140 #, fuzzy, c-format msgid "Lexmark inkjet configuration" msgstr "Настройка proxy кэшуючых сэервераў" #: printer/printerdrake.pm:3111 #, c-format msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" #: printer/printerdrake.pm:3141 #, c-format msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" #: printer/printerdrake.pm:3151 #, fuzzy, c-format msgid "Lexmark X125 configuration" msgstr "Канфігурацыя сеткі" #: printer/printerdrake.pm:3152 #, c-format msgid "" "The driver for this printer only supports printers locally connected via " "USB, no printers on remote machines or print server boxes. Please connect " "your printer to a local USB port or configure it on the machine where it is " "connected to." msgstr "" #: printer/printerdrake.pm:3174 #, fuzzy, c-format msgid "Samsung ML/QL-85G configuration" msgstr "Настройка драйверу Sun" #: printer/printerdrake.pm:3175 printer/printerdrake.pm:3202 #, c-format msgid "" "The driver for this printer only supports printers locally connected on the " "first parallel port, no printers on remote machines or print server boxes or " "on other parallel ports. Please connect your printer to the first parallel " "port or configure it on the machine where it is connected to." msgstr "" #: printer/printerdrake.pm:3201 #, fuzzy, c-format msgid "Canon LBP-460/660 configuration" msgstr "Канфігурацыя" #: printer/printerdrake.pm:3220 #, c-format msgid "Firmware-Upload for HP LaserJet 1000" msgstr "" #: printer/printerdrake.pm:3369 #, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" #: printer/printerdrake.pm:3494 #, fuzzy, c-format msgid "Printer default settings" msgstr "Опцыі прынтэру" #: printer/printerdrake.pm:3501 #, c-format msgid "Option %s must be an integer number!" msgstr "" #: printer/printerdrake.pm:3505 #, c-format msgid "Option %s must be a number!" msgstr "" #: printer/printerdrake.pm:3509 #, c-format msgid "Option %s out of range!" msgstr "" #: printer/printerdrake.pm:3560 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" #: printer/printerdrake.pm:3575 #, fuzzy, c-format msgid "Test pages" msgstr "Гульня \"Сапёр\" для Gnome" #: printer/printerdrake.pm:3576 #, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" #: printer/printerdrake.pm:3580 #, c-format msgid "No test pages" msgstr "" #: printer/printerdrake.pm:3581 #, c-format msgid "Print" msgstr "Друк" #: printer/printerdrake.pm:3606 #, fuzzy, c-format msgid "Standard test page" msgstr "Стандартны" #: printer/printerdrake.pm:3609 #, c-format msgid "Alternative test page (Letter)" msgstr "" #: printer/printerdrake.pm:3612 #, fuzzy, c-format msgid "Alternative test page (A4)" msgstr "Друк тэставых старонак" #: printer/printerdrake.pm:3614 #, fuzzy, c-format msgid "Photo test page" msgstr "Друк тэставых старонак" #: printer/printerdrake.pm:3618 #, fuzzy, c-format msgid "Do not print any test page" msgstr "Друк тэставых старонак" #: printer/printerdrake.pm:3626 printer/printerdrake.pm:3809 #, c-format msgid "Printing test page(s)..." msgstr "Друк тэставых старонак" #: printer/printerdrake.pm:3646 #, fuzzy, c-format msgid "Skipping photo test page." msgstr "Друк тэставых старонак" #: printer/printerdrake.pm:3663 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" #: printer/printerdrake.pm:3667 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" #: printer/printerdrake.pm:3677 #, fuzzy, c-format msgid "Did it work properly?" msgstr "Сеткавы проксі" #: printer/printerdrake.pm:3700 printer/printerdrake.pm:5049 #, fuzzy, c-format msgid "Raw printer" msgstr "Лакальны прынтэр" #: printer/printerdrake.pm:3738 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" #: printer/printerdrake.pm:3740 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: printer/printerdrake.pm:3743 printer/printerdrake.pm:3760 #: printer/printerdrake.pm:3770 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" #: printer/printerdrake.pm:3746 printer/printerdrake.pm:3786 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s%s\n" "\n" msgstr "" #: printer/printerdrake.pm:3750 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" #: printer/printerdrake.pm:3755 printer/printerdrake.pm:3765 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" #: printer/printerdrake.pm:3757 printer/printerdrake.pm:3767 #: printer/printerdrake.pm:3777 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: printer/printerdrake.pm:3762 printer/printerdrake.pm:3772 #, c-format msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" #: printer/printerdrake.pm:3775 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" #: printer/printerdrake.pm:3779 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" #: printer/printerdrake.pm:3783 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" #: printer/printerdrake.pm:3793 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "" #: printer/printerdrake.pm:3794 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "" #: printer/printerdrake.pm:3796 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "" #: printer/printerdrake.pm:3798 #, fuzzy, c-format msgid "Using/Maintaining the printer \"%s\"" msgstr "Адлучэнне ад сеткі" #: printer/printerdrake.pm:3799 #, fuzzy, c-format msgid "Printing on the printer \"%s\"" msgstr "Адлучэнне ад сеткі" #: printer/printerdrake.pm:3805 #, fuzzy, c-format msgid "Print option list" msgstr "Опцыі прынтэру" #: printer/printerdrake.pm:3827 #, c-format msgid "" "Your %s is set up with HP's HPLIP driver software. This way many special " "features of your printer are supported.\n" "\n" msgstr "" #: printer/printerdrake.pm:3830 #, c-format msgid "" "The scanner in your printer can be used with the usual SANE software, for " "example Kooka or XSane (Both in the Multimedia/Graphics menu). " msgstr "" #: printer/printerdrake.pm:3831 #, c-format msgid "" "Run Scannerdrake (Hardware/Scanner in Mandrakelinux Control Center) to share " "your scanner on the network.\n" "\n" msgstr "" #: printer/printerdrake.pm:3835 #, c-format msgid "" "The memory card readers in your printer can be accessed like a usual USB " "mass storage device. " msgstr "" #: printer/printerdrake.pm:3836 #, c-format msgid "" "After inserting a card a hard disk icon to access the card should appear on " "your desktop.\n" "\n" msgstr "" #: printer/printerdrake.pm:3838 #, c-format msgid "" "The memory card readers in your printer can be accessed using HP's Printer " "Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access " "Photo Cards...\" button on the \"Functions\" tab. " msgstr "" #: printer/printerdrake.pm:3839 #, c-format msgid "" "Note that this is very slow, reading the pictures from the camera or a USB " "card reader is usually faster.\n" "\n" msgstr "" #: printer/printerdrake.pm:3842 #, c-format msgid "" "HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a " "lot of status monitoring and maintenance functions for your %s:\n" "\n" msgstr "" #: printer/printerdrake.pm:3843 #, c-format msgid " - Ink level/status info\n" msgstr "" #: printer/printerdrake.pm:3844 #, c-format msgid " - Ink nozzle cleaning\n" msgstr "" #: printer/printerdrake.pm:3845 #, fuzzy, c-format msgid " - Print head alignment\n" msgstr "Гарызантальнае раўнаньне" #: printer/printerdrake.pm:3846 #, fuzzy, c-format msgid " - Color calibration\n" msgstr "Канфігурацыя" #: printer/printerdrake.pm:3861 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "You do not need to run \"scannerdrake\" for setting up scanning on this " "device, you only need to use \"scannerdrake\" if you want to share the " "scanner on the network." msgstr "" #: printer/printerdrake.pm:3887 #, c-format msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" #: printer/printerdrake.pm:3929 printer/printerdrake.pm:3956 #: printer/printerdrake.pm:3991 #, fuzzy, c-format msgid "Transfer printer configuration" msgstr "Настройка драйверу Sun" #: printer/printerdrake.pm:3930 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" #: printer/printerdrake.pm:3933 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" #: printer/printerdrake.pm:3935 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" #: printer/printerdrake.pm:3937 #, c-format msgid "LPD and LPRng do not support IPP printers.\n" msgstr "" #: printer/printerdrake.pm:3939 #, c-format msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" #: printer/printerdrake.pm:3940 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" #: printer/printerdrake.pm:3941 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" #: printer/printerdrake.pm:3944 #, c-format msgid "Do not transfer printers" msgstr "" #: printer/printerdrake.pm:3945 printer/printerdrake.pm:3961 #, c-format msgid "Transfer" msgstr "Перадача" #: printer/printerdrake.pm:3957 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" #: printer/printerdrake.pm:3978 #, fuzzy, c-format msgid "New printer name" msgstr "Сеткавы інтэрфейс" #: printer/printerdrake.pm:3981 #, c-format msgid "Transferring %s..." msgstr "" #: printer/printerdrake.pm:3992 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" #: printer/printerdrake.pm:4002 #, c-format msgid "Refreshing printer data..." msgstr "" #: printer/printerdrake.pm:4011 #, fuzzy, c-format msgid "Starting network..." msgstr "Пачатковы сектар:" #: printer/printerdrake.pm:4054 printer/printerdrake.pm:4058 #: printer/printerdrake.pm:4060 #, fuzzy, c-format msgid "Configure the network now" msgstr "Настройка сеткі" #: printer/printerdrake.pm:4055 #, c-format msgid "Network functionality not configured" msgstr "" #: printer/printerdrake.pm:4056 #, c-format msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" #: printer/printerdrake.pm:4059 #, fuzzy, c-format msgid "Go on without configuring the network" msgstr "Далучэнне да сеткі" #: printer/printerdrake.pm:4094 #, c-format msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network is accessible after booting your " "system and correct the configuration using the %s Control Center, section " "\"Network & Internet\"/\"Connection\", and afterwards set up the printer, " "also using the %s Control Center, section \"Hardware\"/\"Printer\"" msgstr "" #: printer/printerdrake.pm:4095 #, c-format msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" #: printer/printerdrake.pm:4105 #, c-format msgid "Restarting printing system..." msgstr "" #: printer/printerdrake.pm:4135 #, fuzzy, c-format msgid "high" msgstr "Высокі" #: printer/printerdrake.pm:4135 #, fuzzy, c-format msgid "paranoid" msgstr "Паранаідальны" #: printer/printerdrake.pm:4137 #, c-format msgid "Installing a printing system in the %s security level" msgstr "" #: printer/printerdrake.pm:4138 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessible by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" #: printer/printerdrake.pm:4173 #, c-format msgid "Starting the printing system at boot time" msgstr "" #: printer/printerdrake.pm:4174 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" #: printer/printerdrake.pm:4196 #, c-format msgid "Checking installed software..." msgstr "" #: printer/printerdrake.pm:4202 #, c-format msgid "Removing %s..." msgstr "" #: printer/printerdrake.pm:4206 #, fuzzy, c-format msgid "Could not remove the %s printing system!" msgstr "Немагчыма выдаліць тэг!" #: printer/printerdrake.pm:4222 #, fuzzy, c-format msgid "Installing %s..." msgstr "Усталёўваем" #: printer/printerdrake.pm:4226 #, c-format msgid "Could not install the %s printing system!" msgstr "" #: printer/printerdrake.pm:4293 #, c-format msgid "" "In this mode there is no local printing system, all printing requests go " "directly to the server specified below. Note that it is not possible to " "define local print queues then and if the specified server is down it cannot " "be printed at all from this machine." msgstr "" #: printer/printerdrake.pm:4295 #, c-format msgid "" "Enter the host name or IP of your CUPS server and click OK if you want to " "use this mode, click \"Quit\" otherwise." msgstr "" #: printer/printerdrake.pm:4309 #, fuzzy, c-format msgid "Name or IP of remote server:" msgstr "Сервер друку" #: printer/printerdrake.pm:4329 #, c-format msgid "Setting Default Printer..." msgstr "" #: printer/printerdrake.pm:4348 #, fuzzy, c-format msgid "Local CUPS printing system or remote CUPS server?" msgstr "Аддалены сэервер CUPS" #: printer/printerdrake.pm:4349 #, c-format msgid "The CUPS printing system can be used in two ways: " msgstr "" #: printer/printerdrake.pm:4351 #, c-format msgid "1. The CUPS printing system can run locally. " msgstr "" #: printer/printerdrake.pm:4352 #, c-format msgid "" "Then locally connected printers can be used and remote printers on other " "CUPS servers in the same network are automatically discovered. " msgstr "" #: printer/printerdrake.pm:4353 #, c-format msgid "" "Disadvantage of this approach is, that more resources on the local machine " "are needed: Additional software packages need to be installed, the CUPS " "daemon has to run in the background and needs some memory, and the IPP port " "(port 631) is opened. " msgstr "" #: printer/printerdrake.pm:4355 #, c-format msgid "2. All printing requests are immediately sent to a remote CUPS server. " msgstr "" #: printer/printerdrake.pm:4356 #, c-format msgid "" "Here local resource occupation is reduced to a minimum. No CUPS daemon is " "started or port opened, no software infrastructure for setting up local " "print queues is installed, so less memory and disk space is used. " msgstr "" #: printer/printerdrake.pm:4357 #, c-format msgid "" "Disadvantage is that it is not possible to define local printers then and if " "the specified server is down it cannot be printed at all from this machine. " msgstr "" #: printer/printerdrake.pm:4359 #, c-format msgid "How should CUPS be set up on your machine?" msgstr "" #: printer/printerdrake.pm:4363 printer/printerdrake.pm:4378 #: printer/printerdrake.pm:4382 printer/printerdrake.pm:4388 #, c-format msgid "Remote server, specify Name or IP here:" msgstr "" #: printer/printerdrake.pm:4377 #, fuzzy, c-format msgid "Local CUPS printing system" msgstr "Настройка IDE" #: printer/printerdrake.pm:4415 #, fuzzy, c-format msgid "Select Printer Spooler" msgstr "Выбар тыпу злучэння прынтэру" #: printer/printerdrake.pm:4416 #, fuzzy, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "Які пратакол вы жадаеце выкарыстоўваць?" #: printer/printerdrake.pm:4464 #, fuzzy, c-format msgid "Failed to configure printer \"%s\"!" msgstr "Немагчыма выдаліць \"%s\": %s." #: printer/printerdrake.pm:4478 #, fuzzy, c-format msgid "Installing Foomatic..." msgstr "Усталёўваем" #: printer/printerdrake.pm:4484 #, c-format msgid "Could not install %s packages, %s cannot be started!" msgstr "" #: printer/printerdrake.pm:4674 #, c-format msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it. " msgstr "" #: printer/printerdrake.pm:4704 #, c-format msgid "Display all available remote CUPS printers" msgstr "" #: printer/printerdrake.pm:4705 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" #: printer/printerdrake.pm:4716 #, fuzzy, c-format msgid "CUPS configuration" msgstr "Канфігурацыя" #: printer/printerdrake.pm:4728 #, fuzzy, c-format msgid "Change the printing system" msgstr "Змяніць тып раздзелу" #: printer/printerdrake.pm:4737 #, fuzzy, c-format msgid "Normal Mode" msgstr "Рэжым Mmap" #: printer/printerdrake.pm:4738 #, fuzzy, c-format msgid "Expert Mode" msgstr "/Графік" #: printer/printerdrake.pm:4992 printer/printerdrake.pm:5050 #: printer/printerdrake.pm:5128 printer/printerdrake.pm:5137 #, c-format msgid "Printer options" msgstr "Опцыі прынтэру" #: printer/printerdrake.pm:5028 #, fuzzy, c-format msgid "Modify printer configuration" msgstr "Настройка запісу на дыск" #: printer/printerdrake.pm:5030 #, c-format msgid "" "Printer %s%s\n" "What do you want to modify on this printer?" msgstr "" #: printer/printerdrake.pm:5035 #, fuzzy, c-format msgid "This printer is disabled" msgstr "Памеры якога раздзела вы жадаеце змяніць?" #: printer/printerdrake.pm:5037 #, c-format msgid "Do it!" msgstr "" #: printer/printerdrake.pm:5042 printer/printerdrake.pm:5097 #, fuzzy, c-format msgid "Printer connection type" msgstr "Выбар тыпу злучэння прынтэру" #: printer/printerdrake.pm:5043 printer/printerdrake.pm:5103 #, c-format msgid "Printer name, description, location" msgstr "" #: printer/printerdrake.pm:5045 printer/printerdrake.pm:5121 #, c-format msgid "Printer manufacturer, model, driver" msgstr "" #: printer/printerdrake.pm:5046 printer/printerdrake.pm:5122 #, c-format msgid "Printer manufacturer, model" msgstr "" #: printer/printerdrake.pm:5052 printer/printerdrake.pm:5132 #, c-format msgid "Set this printer as the default" msgstr "" #: printer/printerdrake.pm:5057 printer/printerdrake.pm:5138 #: printer/printerdrake.pm:5140 #, fuzzy, c-format msgid "Enable Printer" msgstr "Сервер друку" #: printer/printerdrake.pm:5060 printer/printerdrake.pm:5143 #: printer/printerdrake.pm:5145 #, fuzzy, c-format msgid "Disable Printer" msgstr "Сервер друку" #: printer/printerdrake.pm:5061 printer/printerdrake.pm:5148 #, fuzzy, c-format msgid "Print test pages" msgstr "Друк тэставых старонак" #: printer/printerdrake.pm:5062 printer/printerdrake.pm:5150 #, c-format msgid "Learn how to use this printer" msgstr "" #: printer/printerdrake.pm:5063 printer/printerdrake.pm:5152 #, fuzzy, c-format msgid "Remove printer" msgstr "Аддалены прынтэр" #: printer/printerdrake.pm:5110 #, c-format msgid "Removing old printer \"%s\"..." msgstr "" #: printer/printerdrake.pm:5141 #, fuzzy, c-format msgid "Printer \"%s\" is now enabled." msgstr "Сервер друку" #: printer/printerdrake.pm:5146 #, fuzzy, c-format msgid "Printer \"%s\" is now disabled." msgstr "Сервер друку" #: printer/printerdrake.pm:5183 #, fuzzy, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "Ці жадаеце выдаліць групу %s\n" #: printer/printerdrake.pm:5187 #, fuzzy, c-format msgid "Removing printer \"%s\"..." msgstr "Аддалены прынтэр" #: printer/printerdrake.pm:5211 #, fuzzy, c-format msgid "Default printer" msgstr "Лакальны прынтэр" #: printer/printerdrake.pm:5212 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "" #: raid.pm:42 #, fuzzy, c-format msgid "Can not add a partition to _formatted_ RAID %s" msgstr "Не атрымліваецца дадаць раздзел на _адфармаціраваны_ RAID md%d" #: raid.pm:144 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "Недастаткова раздзелаў для RAID узроўня %d\n" #: scanner.pm:96 #, c-format msgid "Could not create directory /usr/share/sane/firmware!" msgstr "" #: scanner.pm:107 #, c-format msgid "Could not create link /usr/share/sane/%s!" msgstr "" #: scanner.pm:114 #, c-format msgid "Could not copy firmware file %s to /usr/share/sane/firmware!" msgstr "" #: scanner.pm:121 #, c-format msgid "Could not set permissions of firmware file %s!" msgstr "" #: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70 #: standalone/scannerdrake:78 standalone/scannerdrake:346 #: standalone/scannerdrake:382 standalone/scannerdrake:446 #: standalone/scannerdrake:490 standalone/scannerdrake:494 #: standalone/scannerdrake:516 standalone/scannerdrake:581 #, c-format msgid "Scannerdrake" msgstr "" #: scanner.pm:201 standalone/scannerdrake:947 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "" #: scanner.pm:202 #, c-format msgid "Your scanner(s) will not be available for non-root users." msgstr "" #: security/help.pm:11 #, c-format msgid "Accept/Refuse bogus IPv4 error messages." msgstr "" #: security/help.pm:13 #, c-format msgid " Accept/Refuse broadcasted icmp echo." msgstr "" #: security/help.pm:15 #, c-format msgid " Accept/Refuse icmp echo." msgstr "" #: security/help.pm:17 #, c-format msgid "Allow/Forbid autologin." msgstr "" #. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is #: security/help.pm:21 #, c-format msgid "" "If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" "If set to NONE, no issues are allowed.\n" "\n" "Else only /etc/issue is allowed." msgstr "" #: security/help.pm:27 #, c-format msgid "Allow/Forbid reboot by the console user." msgstr "" #: security/help.pm:29 #, c-format msgid "Allow/Forbid remote root login." msgstr "" #: security/help.pm:31 #, c-format msgid "Allow/Forbid direct root login." msgstr "" #: security/help.pm:33 #, c-format msgid "" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." msgstr "" #: security/help.pm:35 #, c-format msgid "" "Allow/forbid to export display when\n" "passing from the root account to the other users.\n" "\n" "See pam_xauth(8) for more details.'" msgstr "" #: security/help.pm:40 #, c-format msgid "" "Allow/Forbid X connections:\n" "\n" "- ALL (all connections are allowed),\n" "\n" "- LOCAL (only connection from local machine),\n" "\n" "- NONE (no connection)." msgstr "" #: security/help.pm:48 #, c-format msgid "" "The argument specifies if clients are authorized to connect\n" "to the X server from the network on the tcp port 6000 or not." msgstr "" #. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're #: security/help.pm:53 #, c-format msgid "" "Authorize:\n" "\n" "- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " "set to \"ALL\",\n" "\n" "- only local ones if set to \"LOCAL\"\n" "\n" "- none if set to \"NONE\".\n" "\n" "To authorize the services you need, use /etc/hosts.allow (see hosts.allow" "(5))." msgstr "" #: security/help.pm:63 #, c-format msgid "" "If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" "is greater than 3 in /etc/security/msec/security.conf, creates the\n" "symlink /etc/security/msec/server to point to\n" "/etc/security/msec/server..\n" "\n" "The /etc/security/msec/server is used by chkconfig --add to decide to\n" "add a service if it is present in the file during the installation of\n" "packages." msgstr "" #: security/help.pm:72 #, c-format msgid "" "Enable/Disable crontab and at for users.\n" "\n" "Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" "and crontab(1))." msgstr "" #: security/help.pm:77 #, c-format msgid "Enable/Disable syslog reports to console 12" msgstr "" #: security/help.pm:79 #, c-format msgid "" "Enable/Disable name resolution spoofing protection. If\n" "\"%s\" is true, also reports to syslog." msgstr "" #: security/help.pm:80 standalone/draksec:213 #, fuzzy, c-format msgid "Security Alerts:" msgstr "Бясьпека" #: security/help.pm:82 #, c-format msgid "Enable/Disable IP spoofing protection." msgstr "" #: security/help.pm:84 #, c-format msgid "Enable/Disable libsafe if libsafe is found on the system." msgstr "" #: security/help.pm:86 #, c-format msgid "Enable/Disable the logging of IPv4 strange packets." msgstr "" #: security/help.pm:88 #, c-format msgid "Enable/Disable msec hourly security check." msgstr "" #: security/help.pm:90 #, c-format msgid "" " Enabling su only from members of the wheel group or allow su from any user." msgstr "" #: security/help.pm:92 #, c-format msgid "Use password to authenticate users." msgstr "" #: security/help.pm:94 #, c-format msgid "Activate/Disable ethernet cards promiscuity check." msgstr "" #: security/help.pm:96 #, c-format msgid " Activate/Disable daily security check." msgstr "" #: security/help.pm:98 #, c-format msgid " Enable/Disable sulogin(8) in single user level." msgstr "" #: security/help.pm:100 #, c-format msgid "Add the name as an exception to the handling of password aging by msec." msgstr "" #: security/help.pm:102 #, c-format msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." msgstr "" #: security/help.pm:104 #, c-format msgid "Set the password history length to prevent password reuse." msgstr "" #: security/help.pm:106 #, c-format msgid "" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "" #: security/help.pm:108 #, fuzzy, c-format msgid "Set the root umask." msgstr "Пароль для root" #: security/help.pm:109 #, c-format msgid "if set to yes, check open ports." msgstr "" #: security/help.pm:110 #, c-format msgid "" "if set to yes, check for:\n" "\n" "- empty passwords,\n" "\n" "- no password in /etc/shadow\n" "\n" "- for users with the 0 id other than root." msgstr "" #: security/help.pm:117 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" #: security/help.pm:118 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "" #: security/help.pm:119 #, c-format msgid "if set to yes, run the daily security checks." msgstr "" #: security/help.pm:120 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "" #: security/help.pm:121 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "" #: security/help.pm:122 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "" #: security/help.pm:123 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "" #: security/help.pm:124 #, c-format msgid "if set to yes, report unowned files." msgstr "" #: security/help.pm:125 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "" #: security/help.pm:126 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "" #: security/help.pm:127 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" #: security/help.pm:128 #, c-format msgid "if set to yes, report check result by mail." msgstr "" #: security/help.pm:129 #, c-format msgid "Do not send mails if there's nothing to warn about" msgstr "" #: security/help.pm:130 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "" #: security/help.pm:131 #, c-format msgid "if set to yes, report check result to syslog." msgstr "" #: security/help.pm:132 #, c-format msgid "if set to yes, reports check result to tty." msgstr "" #: security/help.pm:134 #, c-format msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "" #: security/help.pm:136 #, c-format msgid "Set the shell timeout. A value of zero means no timeout." msgstr "" #: security/help.pm:136 #, c-format msgid "Timeout unit is second" msgstr "" #: security/help.pm:138 #, c-format msgid "Set the user umask." msgstr "" #: security/l10n.pm:11 #, c-format msgid "Accept bogus IPv4 error messages" msgstr "" #: security/l10n.pm:12 #, c-format msgid "Accept broadcasted icmp echo" msgstr "" #: security/l10n.pm:13 #, c-format msgid "Accept icmp echo" msgstr "" #: security/l10n.pm:15 #, c-format msgid "/etc/issue* exist" msgstr "" #: security/l10n.pm:16 #, c-format msgid "Reboot by the console user" msgstr "" #: security/l10n.pm:17 #, c-format msgid "Allow remote root login" msgstr "" #: security/l10n.pm:18 #, c-format msgid "Direct root login" msgstr "" #: security/l10n.pm:19 #, c-format msgid "List users on display managers (kdm and gdm)" msgstr "" #: security/l10n.pm:20 #, c-format msgid "Export display when passing from root to the other users" msgstr "" #: security/l10n.pm:21 #, fuzzy, c-format msgid "Allow X Window connections" msgstr "Уласьцівасьці акна" #: security/l10n.pm:22 #, c-format msgid "Authorize TCP connections to X Window" msgstr "" #: security/l10n.pm:23 #, c-format msgid "Authorize all services controlled by tcp_wrappers" msgstr "" #: security/l10n.pm:24 #, fuzzy, c-format msgid "Chkconfig obey msec rules" msgstr "Настройка службаў" #: security/l10n.pm:25 #, c-format msgid "Enable \"crontab\" and \"at\" for users" msgstr "" #: security/l10n.pm:26 #, c-format msgid "Syslog reports to console 12" msgstr "" #: security/l10n.pm:27 #, c-format msgid "Name resolution spoofing protection" msgstr "" #: security/l10n.pm:28 #, fuzzy, c-format msgid "Enable IP spoofing protection" msgstr "Дазволіць засцярогу ад абразання" #: security/l10n.pm:29 #, c-format msgid "Enable libsafe if libsafe is found on the system" msgstr "" #: security/l10n.pm:30 #, c-format msgid "Enable the logging of IPv4 strange packets" msgstr "" #: security/l10n.pm:31 #, c-format msgid "Enable msec hourly security check" msgstr "" #: security/l10n.pm:32 #, c-format msgid "Enable su only from the wheel group members or for any user" msgstr "" #: security/l10n.pm:33 #, c-format msgid "Use password to authenticate users" msgstr "" #: security/l10n.pm:34 #, c-format msgid "Ethernet cards promiscuity check" msgstr "" #: security/l10n.pm:35 #, c-format msgid "Daily security check" msgstr "" #: security/l10n.pm:36 #, c-format msgid "Sulogin(8) in single user level" msgstr "" #: security/l10n.pm:37 #, fuzzy, c-format msgid "No password aging for" msgstr "Няма паролю" #: security/l10n.pm:38 #, c-format msgid "Set password expiration and account inactivation delays" msgstr "" #: security/l10n.pm:39 #, fuzzy, c-format msgid "Password history length" msgstr "Настроіць паролі" #: security/l10n.pm:40 #, c-format msgid "Password minimum length and number of digits and upcase letters" msgstr "" #: security/l10n.pm:41 #, fuzzy, c-format msgid "Root umask" msgstr "Пароль для root" #: security/l10n.pm:42 #, c-format msgid "Shell history size" msgstr "" #: security/l10n.pm:43 #, c-format msgid "Shell timeout" msgstr "" #: security/l10n.pm:44 #, fuzzy, c-format msgid "User umask" msgstr "Карыстальнікі" #: security/l10n.pm:45 #, c-format msgid "Check open ports" msgstr "" #: security/l10n.pm:46 #, c-format msgid "Check for unsecured accounts" msgstr "" #: security/l10n.pm:47 #, c-format msgid "Check permissions of files in the users' home" msgstr "" #: security/l10n.pm:48 #, c-format msgid "Check if the network devices are in promiscuous mode" msgstr "" #: security/l10n.pm:49 #, c-format msgid "Run the daily security checks" msgstr "" #: security/l10n.pm:50 #, c-format msgid "Check additions/removals of sgid files" msgstr "" #: security/l10n.pm:51 #, c-format msgid "Check empty password in /etc/shadow" msgstr "" #: security/l10n.pm:52 #, c-format msgid "Verify checksum of the suid/sgid files" msgstr "" #: security/l10n.pm:53 #, c-format msgid "Check additions/removals of suid root files" msgstr "" #: security/l10n.pm:54 #, c-format msgid "Report unowned files" msgstr "" #: security/l10n.pm:55 #, c-format msgid "Check files/directories writable by everybody" msgstr "" #: security/l10n.pm:56 #, c-format msgid "Run chkrootkit checks" msgstr "" #: security/l10n.pm:57 #, c-format msgid "Do not send mails when unneeded" msgstr "" #: security/l10n.pm:58 #, c-format msgid "If set, send the mail report to this email address else send it to root" msgstr "" #: security/l10n.pm:59 #, c-format msgid "Report check result by mail" msgstr "" #: security/l10n.pm:60 #, c-format msgid "Run some checks against the rpm database" msgstr "" #: security/l10n.pm:61 #, c-format msgid "Report check result to syslog" msgstr "" #: security/l10n.pm:62 #, c-format msgid "Reports check result to tty" msgstr "" #: security/level.pm:10 #, c-format msgid "Welcome To Crackers" msgstr "Сардэчна запрашаем у Crackers" #: security/level.pm:11 #, c-format msgid "Poor" msgstr "Зусім слабы" #: security/level.pm:13 #, c-format msgid "High" msgstr "Высокі" #: security/level.pm:14 #, c-format msgid "Higher" msgstr "Высокі" #: security/level.pm:15 #, c-format msgid "Paranoid" msgstr "Паранаідальны" #: security/level.pm:41 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "Гэты узровень неабходна выкарыстоўваць з асцярогай. Сістэма будзе прасцей\n" "у карыстанні, але і больш чутнай: гэты узровень бяспекі нельга " "выкарыстоўваць\n" "на машынах, якія далучаны да сеткі ці да Інтернет. Уваход не абаронены " "паролем." #: security/level.pm:44 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "Пароль зараз уключаны, але выкарыстанне камп'ютэру ў якасці сеткавага\n" "таксама не рэкамендавана." #: security/level.pm:45 #, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" #: security/level.pm:46 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" #: security/level.pm:47 #, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" #: security/level.pm:50 #, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" #: security/level.pm:55 #, fuzzy, c-format msgid "DrakSec Basic Options" msgstr "Пазначце параметры" #: security/level.pm:56 #, fuzzy, c-format msgid "Please choose the desired security level" msgstr "калі ласка, пазначце тып вашай мышы." #: security/level.pm:60 #, fuzzy, c-format msgid "Security level" msgstr "Бясьпека" #: security/level.pm:62 #, c-format msgid "Use libsafe for servers" msgstr "" #: security/level.pm:63 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" #: security/level.pm:64 #, c-format msgid "Security Administrator (login or email)" msgstr "" #: services.pm:19 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "" #: services.pm:20 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "Anacron, перыядычны камандны планавальнік." #: services.pm:21 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "ampd выкарыстоўваецца для адслежвання статусу батарэі і вядзення " "статыстыкі.\n" "Яго можна выкарыстоўваць для выключэння машыны пры нізкім зарадзе батарэі." #: services.pm:23 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "Каманды, якія выконваюцца, фіксуюцца па камандзе і часе яе выканання\n" "і выконваюцца групы каманд, калі загрузка памяці ніжэй дастатковай." #: services.pm:25 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "cron - стандартная UNIX праграма, якая выконвае праграмы карыстальніка\n" "праз пазначаныя перыяды часу. Vixie cron дадае рад дапаўненняў да " "стандартнага\n" "UNIX cron, уключаючы лепшы ўзровень бяспекі і моцныя канфігурацыйныя опцыі." #: services.pm:28 #, c-format msgid "" "FAM is a file monitoring daemon. It is used to get reports when files " "change.\n" "It is used by GNOME and KDE" msgstr "" #: services.pm:30 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM дадае падтрымку мышы да праграмаў, якія працуюць у тэкставым рэжыме,\n" "такіх як Midnight Commander. Гэта дазваляе выкарыстоўваць мыш пры " "капіраванні і ўстаўцы,\n" "і ўключае падтрымку ўсплываючых (pop-up) меню ў тэкставым рэжыме." #: services.pm:33 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" #: services.pm:35 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" "Apache - гэта World Wide Web сэервер. Ён выкарыстоўзваеца для абслугоўвання\n" "HTML файлаў і CGI." #: services.pm:36 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "Інтэрнэт суперсэервер-дэман (завецца inetd) запускае пры старце \n" "колькасць розных інтэрнэт службаў, якія неабходны. Яго можна выкарыстоўваць " "для пуску\n" "шматлікіх службаў, уключаючы telnet, ftp, rsh і rlogin. Блакуючы inetd, " "блакуем\n" "усе службы, за якія ён адказвае." #: services.pm:40 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" #: services.pm:42 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "Гэты пакет загружае абраную раскладку клавіятуры як набор з\n" "/etc/sysconfig/keyboard. Ёна можа быць абрана таксама з дапамогай " "kbdconfig.\n" "Вы можаце зрабіць даступнай яе для шматлікіх машынаў." #: services.pm:45 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" #: services.pm:47 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "" #: services.pm:48 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" #: services.pm:50 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd - гэты дэман друку, патрэбны для карэктнай працы lpr. Гэта\n" "сэервер, які кіруе працай прынтэру(аў)." #: services.pm:52 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" #: services.pm:54 #, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" #: services.pm:55 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "Манціраваць і разманціраваць усе сеткавыя файлавыя сістэмы (NFS),\n" " SMB (Lan Manager/Windows) і NCP (Netware) пункты манціравання." #: services.pm:57 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "Актывізаваць/дэактывізаваць усе сеткавыя інтэрфейсы, сканфігураваныя для\n" "старту пры загрузцы сістэмы." #: services.pm:59 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS - гэта вядомы пратакол для доступу да файлаў праз TCP/IP сеткі.\n" "Гэтая служба забяспечваецца NFS сэерверам, які канфігурыруеца праз\n" "/etc/exports файл." #: services.pm:62 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS - гэта вядомы пратакол для доступу да файлаў праз TCP/IP\n" "сеткі. Гэтая служба ўплывае на наяўнасць сувязі паміж NFS файламі." #: services.pm:64 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and Xorg at boot." msgstr "" #: services.pm:66 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "" #: services.pm:67 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It will not get started unless configured so it is safe " "to have\n" "it installed on machines that do not need it." msgstr "" "Падтрымка PCMCIA - гэта звычайна падтрымка такіх рэчаў, як Ethernet і\n" "мадэмы ў наўтбуках. Вам няма неабходнасці канфігураваць іх, калі на вашай\n" "машыне іх няма, ці яна не наўтбук." #: services.pm:70 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "Portmapper (аглядальнік партоў) кіруе RPC злучэннямі, якія звычайна\n" "выкарыстоўваюцца такімі пратаколамі як NFS і NIS. Portmap сэервер павінен " "выконвацца\n" "на машынах якія працуюць як сэерверы для пратаколаў, якія скарыстоўваюць RPC." #: services.pm:73 #, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" #: services.pm:74 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "Захаваць і аднавіць сістэмны энтрапійны пул для высокай якасці\n" "генерацыі выпадковых лікаў." #: services.pm:76 #, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" #: services.pm:78 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "Дэман маршрутызацыі дазваляе дынамічным табліцам IP маршрутызацыі\n" "аднаўляцца праз RIP пратакол. RIP выкарыстоўваецца ў малых сетках, больш\n" "складаныя пратаколы маршрутызацыі - у вялікіх сетках." #: services.pm:81 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "Пратакол rstat дазваляе карыстальнікам сеткі атрымліваць\n" "памеры нагрузкі для кожнай машыны сеткі." #: services.pm:83 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "Пратакол rusers дазваляе карыстальнікам сеткі вызначаць, хто\n" "ўвайшоў і працуе на машынах ў сетцы." #: services.pm:85 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similar to finger)." msgstr "" "Пратакол rwho дае магчымасць карыстальнікам атрымаць спіс ўсіх\n" "карыстальнікаў, увайшоўшых на машыну, выканаў rwho дэман (падобны на finger)." #: services.pm:87 #, c-format msgid "Launch the sound system on your machine" msgstr "" #: services.pm:88 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "Syslog - гэта сродак, з дапамогай якога многія дэманы запісваюць " "паведамленні\n" "ў розныя файлы статыстыкі. Гэта вельмі добра для агляду працы розных службаў." #: services.pm:90 #, c-format msgid "Load the drivers for your usb devices." msgstr "" #: services.pm:91 #, c-format msgid "Starts the X Font Server (this is mandatory for Xorg to run)." msgstr "" #: services.pm:115 services.pm:157 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "Абярыце, якія сервісы запускаць аўтаматычна пры загрузцы" #: services.pm:127 #, c-format msgid "Printing" msgstr "Друкаваньне" #: services.pm:128 #, c-format msgid "Internet" msgstr "Інтэрнэт" #: services.pm:131 #, fuzzy, c-format msgid "File sharing" msgstr "Мэнэджэр файлаў" #: services.pm:138 #, fuzzy, c-format msgid "Remote Administration" msgstr "Сістэмнае адміністраваньне" #: services.pm:146 #, fuzzy, c-format msgid "Database Server" msgstr "Праграма гуказапісу" #: services.pm:209 #, fuzzy, c-format msgid "running" msgstr "Увага!" #: services.pm:209 #, fuzzy, c-format msgid "stopped" msgstr "Далучыць" #: services.pm:213 #, fuzzy, c-format msgid "Services and daemons" msgstr "Мэнэджэр сэрвісаў" #: services.pm:219 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" #: services.pm:224 ugtk2.pm:1010 #, c-format msgid "Info" msgstr "Інфармацыя" #: services.pm:227 #, c-format msgid "Start when requested" msgstr "" #: services.pm:227 #, fuzzy, c-format msgid "On boot" msgstr "Yaboot" #: services.pm:244 #, c-format msgid "Start" msgstr "У пачатак" #: services.pm:244 #, c-format msgid "Stop" msgstr "Спыніць" #: share/advertising/01.pl:13 #, c-format msgid "What is Mandrakelinux?" msgstr "" #: share/advertising/01.pl:15 #, c-format msgid "Welcome to Mandrakelinux!" msgstr "Сардэчна запрашаем у Mandrakelinux!" #: share/advertising/01.pl:17 #, c-format msgid "" "Mandrakelinux is a Linux distribution that comprises the core of the " "system, called the operating system (based on the Linux kernel) " "together with a lot of applications meeting every need you could even " "think of." msgstr "" #: share/advertising/01.pl:19 #, c-format msgid "" "Mandrakelinux is the most user-friendly Linux distribution today. It " "is also one of the most widely used Linux distributions worldwide!" msgstr "" #: share/advertising/02.pl:13 #, c-format msgid "Open Source" msgstr "" #: share/advertising/02.pl:15 #, c-format msgid "Welcome to the world of open source!" msgstr "" #: share/advertising/02.pl:17 #, c-format msgid "" "Mandrakelinux is committed to the open source model. This means that this " "new release is the result of collaboration between Mandrakesoft's " "team of developers and the worldwide community of Mandrakelinux " "contributors." msgstr "" #: share/advertising/02.pl:19 #, c-format msgid "" "We would like to thank everyone who participated in the development " "of this latest release." msgstr "" #: share/advertising/03.pl:13 #, c-format msgid "The GPL" msgstr "" #: share/advertising/03.pl:15 #, c-format msgid "" "Most of the software included in the distribution and all of the " "Mandrakelinux tools are licensed under the General Public License." msgstr "" #: share/advertising/03.pl:17 #, c-format msgid "" "The GPL is at the heart of the open source model; it grants everyone the " "freedom to use, study, distribute and improve the software any way " "they want, provided they make the results available." msgstr "" #: share/advertising/03.pl:19 #, c-format msgid "" "The main benefit of this is that the number of developers is virtually " "unlimited, resulting in very high quality software." msgstr "" #: share/advertising/04.pl:13 #, c-format msgid "Join the Community" msgstr "" #: share/advertising/04.pl:15 #, c-format msgid "" "Mandrakelinux has one of the biggest communities of users and " "developers. The role of such a community is very wide, ranging from bug " "reporting to the development of new applications. The community plays a " "key role in the Mandrakelinux world." msgstr "" #: share/advertising/04.pl:17 #, c-format msgid "" "To learn more about our dynamic community, please visit www." "mandrakelinux.com or directly www.mandrakelinux.com/en/cookerdevel." "php3 if you would like to get involved in the development." msgstr "" #: share/advertising/05.pl:13 #, c-format msgid "Download Version" msgstr "" #: share/advertising/05.pl:15 #, c-format msgid "" "You are now installing Mandrakelinux Download. This is the free " "version that Mandrakesoft wants to keep available to everyone." msgstr "" #: share/advertising/05.pl:17 #, c-format msgid "" "The Download version cannot include all the software that is not open " "source. Therefore, you will not find in the Download version:" msgstr "" #: share/advertising/05.pl:18 #, c-format msgid "" "\t* Proprietary drivers (such as drivers for NVIDIA®, ATI™, etc.)." msgstr "" #: share/advertising/05.pl:19 #, c-format msgid "" "\t* Proprietary software (such as Acrobat® Reader®, RealPlayer®, " "Flash™, etc.)." msgstr "" #: share/advertising/05.pl:21 #, c-format msgid "" "You will not have access to the services included in the other " "Mandrakesoft products either." msgstr "" #: share/advertising/06.pl:13 #, c-format msgid "Discovery, Your First Linux Desktop" msgstr "" #: share/advertising/06.pl:15 #, c-format msgid "You are now installing Mandrakelinux Discovery." msgstr "" #: share/advertising/06.pl:17 #, c-format msgid "" "Discovery is the easiest and most user-friendly Linux " "distribution. It includes a hand-picked selection of premium software " "for office, multimedia and Internet activities. Its menu is task-oriented, " "with a single application per task." msgstr "" #: share/advertising/07.pl:13 #, c-format msgid "PowerPack, The Ultimate Linux Desktop" msgstr "" #: share/advertising/07.pl:15 #, c-format msgid "You are now installing Mandrakelinux PowerPack." msgstr "" #: share/advertising/07.pl:17 #, c-format msgid "" "PowerPack is Mandrakesoft's premier Linux desktop product. PowerPack " "includes thousands of applications - everything from the most popular " "to the most advanced." msgstr "" #: share/advertising/08.pl:13 #, c-format msgid "PowerPack+, The Linux Solution for Desktops and Servers" msgstr "" #: share/advertising/08.pl:15 #, c-format msgid "You are now installing Mandrakelinux PowerPack+." msgstr "" #: share/advertising/08.pl:17 #, c-format msgid "" "PowerPack+ is a full-featured Linux solution for small to medium-" "sized networks. PowerPack+ includes thousands of desktop " "applications and a comprehensive selection of world-class server " "applications." msgstr "" #: share/advertising/09.pl:13 #, fuzzy, c-format msgid "Mandrakesoft Products" msgstr "Цэнтар кіраваньня" #: share/advertising/09.pl:15 #, c-format msgid "" "Mandrakesoft has developed a wide range of Mandrakelinux " "products." msgstr "" #: share/advertising/09.pl:17 #, c-format msgid "The Mandrakelinux 10.1 products are:" msgstr "" #: share/advertising/09.pl:18 #, c-format msgid "\t* Discovery, Your First Linux Desktop." msgstr "" #: share/advertising/09.pl:19 #, c-format msgid "\t* PowerPack, The Ultimate Linux Desktop." msgstr "" #: share/advertising/09.pl:20 #, c-format msgid "\t* PowerPack+, The Linux Solution for Desktops and Servers." msgstr "" #: share/advertising/09.pl:21 #, c-format msgid "" "\t* Mandrakelinux 10.1 for x86-64, The Mandrakelinux solution for " "making the most of your 64-bit processor." msgstr "" #: share/advertising/10.pl:13 #, c-format msgid "Mandrakesoft Products (Nomad Products)" msgstr "" #: share/advertising/10.pl:15 #, c-format msgid "" "Mandrakesoft has developed two products that allow you to use Mandrakelinux " "on any computer and without any need to actually install it:" msgstr "" #: share/advertising/10.pl:16 #, c-format msgid "" "\t* Move, a Mandrakelinux distribution that runs entirely from a " "bootable CD-ROM." msgstr "" #: share/advertising/10.pl:17 #, c-format msgid "" "\t* GlobeTrotter, a Mandrakelinux distribution pre-installed on the " "ultra-compact “LaCie Mobile Hard Drive”." msgstr "" #: share/advertising/11.pl:13 #, c-format msgid "Mandrakesoft Products (Professional Solutions)" msgstr "" #: share/advertising/11.pl:15 #, c-format msgid "" "Below are the Mandrakesoft products designed to meet the professional " "needs:" msgstr "" #: share/advertising/11.pl:16 #, c-format msgid "\t* Corporate Desktop, The Mandrakelinux Desktop for Businesses." msgstr "" #: share/advertising/11.pl:17 #, c-format msgid "\t* Corporate Server, The Mandrakelinux Server Solution." msgstr "" #: share/advertising/11.pl:18 #, c-format msgid "\t* Multi-Network Firewall, The Mandrakelinux Security Solution." msgstr "" #: share/advertising/12.pl:13 #, c-format msgid "The KDE Choice" msgstr "" #: share/advertising/12.pl:15 #, c-format msgid "" "With your Discovery, you will be introduced to KDE, the most advanced " "and user-friendly graphical desktop environment available." msgstr "" #: share/advertising/12.pl:17 #, c-format msgid "" "KDE will make your first steps with Linux so easy that you " "will not ever think of running another operating system!" msgstr "" #: share/advertising/12.pl:19 #, c-format msgid "" "KDE also includes a lot of well integrated applications such as " "Konqueror, the web browser and Kontact, the personal information manager." msgstr "" #: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13 #, c-format msgid "Choose your Favorite Desktop Environment" msgstr "" #: share/advertising/13-a.pl:15 #, c-format msgid "" "With PowerPack, you will have the choice of the graphical desktop " "environment. Mandrakesoft has chosen KDE as the default one." msgstr "" #: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17 #, c-format msgid "" "KDE is one of the most advanced and user-friendly graphical " "desktop environment available. It includes a lot of integrated applications." msgstr "" #: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19 #, c-format msgid "" "But we advise you to try all available ones (including GNOME, " "IceWM, etc.) and pick your favorite." msgstr "" #: share/advertising/13-b.pl:15 #, c-format msgid "" "With PowerPack+, you will have the choice of the graphical desktop " "environment. Mandrakesoft has chosen KDE as the default one." msgstr "" #: share/advertising/14.pl:13 #, c-format msgid "OpenOffice.org" msgstr "" #: share/advertising/14.pl:15 #, c-format msgid "With Discovery, you will discover OpenOffice.org." msgstr "" #: share/advertising/14.pl:17 #, c-format msgid "" "It is a full-featured office suite that includes word processor, " "spreadsheet, presentation and drawing applications." msgstr "" #: share/advertising/14.pl:19 #, c-format msgid "" "OpenOffice.org can read and write most types of Microsoft® Office " "documents such as Word, Excel and PowerPoint® files." msgstr "" #: share/advertising/15.pl:13 #, c-format msgid "Kontact" msgstr "Кантакт" #: share/advertising/15.pl:15 #, c-format msgid "" "Discovery includes Kontact, the new KDE groupware solution." msgstr "" #: share/advertising/15.pl:17 #, c-format msgid "" "More than just a full-featured e-mail client, Kontact also includes " "an address book, a calendar, plus a tool for taking notes!" msgstr "" #: share/advertising/15.pl:19 #, c-format msgid "" "It is the easiest way to communicate with your contacts and to organize your " "time." msgstr "" #: share/advertising/16.pl:13 #, fuzzy, c-format msgid "Surf the Internet" msgstr "Інтэрнэт" #: share/advertising/16.pl:15 #, c-format msgid "Discovery will give you access to every Internet resource:" msgstr "" #: share/advertising/16.pl:16 #, c-format msgid "\t* Browse the Web with Konqueror." msgstr "" #: share/advertising/16.pl:17 #, c-format msgid "\t* Chat online with your friends using Kopete." msgstr "" #: share/advertising/16.pl:18 #, c-format msgid "\t* Transfer files with KBear." msgstr "" #: share/advertising/16.pl:19 share/advertising/17.pl:19 #: share/advertising/18.pl:22 #, c-format msgid "\t* ..." msgstr "" #: share/advertising/17.pl:13 #, c-format msgid "Enjoy our Multimedia Features" msgstr "" #: share/advertising/17.pl:15 #, c-format msgid "Discovery will also make multimedia very easy for you:" msgstr "" #: share/advertising/17.pl:16 #, c-format msgid "\t* Watch your favorite videos with Kaffeine." msgstr "" #: share/advertising/17.pl:17 #, c-format msgid "\t* Listen to your music files with amaroK." msgstr "" #: share/advertising/17.pl:18 #, c-format msgid "\t* Edit and create images with the GIMP." msgstr "" #: share/advertising/18.pl:13 #, c-format msgid "Enjoy the Wide Range of Applications" msgstr "" #: share/advertising/18.pl:15 #, c-format msgid "" "In the Mandrakelinux menu you will find easy-to-use applications for " "all of your tasks:" msgstr "" #: share/advertising/18.pl:16 #, c-format msgid "\t* Create, edit and share office documents with OpenOffice.org." msgstr "" #: share/advertising/18.pl:17 #, c-format msgid "" "\t* Manage your personal data with the integrated personal information " "suites Kontact and Evolution." msgstr "" #: share/advertising/18.pl:18 #, c-format msgid "\t* Browse the web with Mozilla and Konqueror." msgstr "" #: share/advertising/18.pl:19 #, c-format msgid "\t* Participate in online chat with Kopete." msgstr "" #: share/advertising/18.pl:20 #, c-format msgid "" "\t* Listen to your audio CDs and music files, watch your " "videos." msgstr "" #: share/advertising/18.pl:21 #, c-format msgid "\t* Edit and create images with the GIMP." msgstr "" #: share/advertising/19.pl:13 #, fuzzy, c-format msgid "Development Environments" msgstr "Распрацоўка" #: share/advertising/19.pl:15 share/advertising/22.pl:15 #, c-format msgid "" "PowerPack gives you the best tools to develop your own applications." msgstr "" #: share/advertising/19.pl:17 #, c-format msgid "" "You will enjoy the powerful, integrated development environment from KDE, " "KDevelop, which will let you program in a lot of languages." msgstr "" #: share/advertising/19.pl:19 #, c-format msgid "" "PowerPack also ships with GCC, the leading Linux compiler and GDB, the associated debugger." msgstr "" #: share/advertising/20.pl:13 #, fuzzy, c-format msgid "Development Editors" msgstr "Распрацоўка" #: share/advertising/20.pl:15 #, c-format msgid "PowerPack will let you choose between those popular editors:" msgstr "" #: share/advertising/20.pl:16 #, c-format msgid "\t* Emacs: a customizable and real time display editor." msgstr "" #: share/advertising/20.pl:17 #, c-format msgid "" "\t* XEmacs: another open source text editor and application " "development system." msgstr "" #: share/advertising/20.pl:18 #, c-format msgid "" "\t* Vim: an advanced text editor with more features than standard Vi." msgstr "" #: share/advertising/21.pl:13 #, fuzzy, c-format msgid "Development Languages" msgstr "Распрацоўка" #: share/advertising/21.pl:15 #, c-format msgid "" "With all these powerful tools, you will be able to write applications " "in dozens of programming languages:" msgstr "" #: share/advertising/21.pl:16 #, c-format msgid "\t* The famous C language." msgstr "" #: share/advertising/21.pl:17 #, c-format msgid "\t* Object oriented languages:" msgstr "" #: share/advertising/21.pl:18 #, c-format msgid "\t\t* C++" msgstr "" #: share/advertising/21.pl:19 #, c-format msgid "\t\t* Java™" msgstr "" #: share/advertising/21.pl:20 #, fuzzy, c-format msgid "\t* Scripting languages:" msgstr "Мэнэджэр друку" #: share/advertising/21.pl:21 #, c-format msgid "\t\t* Perl" msgstr "" #: share/advertising/21.pl:22 #, c-format msgid "\t\t* Python" msgstr "" #: share/advertising/21.pl:23 share/advertising/28.pl:22 #, c-format msgid "\t* And many more." msgstr "" #: share/advertising/22.pl:13 #, fuzzy, c-format msgid "Development Tools" msgstr "Распрацоўка" #: share/advertising/22.pl:17 #, c-format msgid "" "With the powerful integrated development environment KDevelop and the " "leading Linux compiler GCC, you will be able to create applications " "in many different languages (C, C++, Java™, Perl, Python, etc.)." msgstr "" #: share/advertising/23.pl:13 #, c-format msgid "Groupware Server" msgstr "" #: share/advertising/23.pl:15 #, c-format msgid "" "PowerPack+ will give you access to Kolab, a full-featured " "groupware server which will, thanks to the client Kontact, " "allow you to:" msgstr "" #: share/advertising/23.pl:16 #, c-format msgid "\t* Send and receive your e-mails." msgstr "" #: share/advertising/23.pl:17 #, c-format msgid "\t* Share your agendas and your address books." msgstr "" #: share/advertising/23.pl:18 #, c-format msgid "\t* Manage your memos and task lists." msgstr "" #: share/advertising/24.pl:13 #, fuzzy, c-format msgid "Servers" msgstr "Сервак" #: share/advertising/24.pl:15 #, c-format msgid "" "Empower your business network with premier server solutions including:" msgstr "" #: share/advertising/24.pl:16 #, c-format msgid "" "\t* Samba: File and print services for Microsoft® Windows® clients." msgstr "" #: share/advertising/24.pl:17 #, c-format msgid "\t* Apache: The most widely used web server." msgstr "" #: share/advertising/24.pl:18 #, c-format msgid "" "\t* MySQL and PostgreSQL: The world's most popular open source " "databases." msgstr "" #: share/advertising/24.pl:19 #, c-format msgid "" "\t* CVS: Concurrent Versions System, the dominant open source network-" "transparent version control system." msgstr "" #: share/advertising/24.pl:20 #, c-format msgid "" "\t* ProFTPD: The highly configurable GPL-licensed FTP server software." msgstr "" #: share/advertising/24.pl:21 #, c-format msgid "" "\t* Postfix and Sendmail: The popular and powerful mail " "servers." msgstr "" #: share/advertising/25.pl:13 #, fuzzy, c-format msgid "Mandrakelinux Control Center" msgstr "Цэнтар кіраваньня" #: share/advertising/25.pl:15 #, c-format msgid "" "The Mandrakelinux Control Center is an essential collection of " "Mandrakelinux-specific utilities designed to simplify the configuration of " "your computer." msgstr "" #: share/advertising/25.pl:17 #, c-format msgid "" "You will immediately appreciate this collection of more than 60 handy " "utilities for easily configuring your system: hardware devices, mount " "points, network and Internet, security level of your computer, etc." msgstr "" #: share/advertising/26.pl:13 #, c-format msgid "The Open Source Model" msgstr "" #: share/advertising/26.pl:15 #, c-format msgid "" "Like all computer programming, open source software requires time and " "people for development. In order to respect the open source philosophy, " "Mandrakesoft sells added value products and services to keep improving " "Mandrakelinux. If you want to support the open source philosophy " "and the development of Mandrakelinux, please consider buying one of " "our products or services!" msgstr "" #: share/advertising/27.pl:13 #, c-format msgid "Online Store" msgstr "" #: share/advertising/27.pl:15 #, c-format msgid "" "To learn more about Mandrakesoft products and services, you can visit our " "e-commerce platform." msgstr "" #: share/advertising/27.pl:17 #, c-format msgid "There you can find all our products, services and third-party products." msgstr "" #: share/advertising/27.pl:19 #, c-format msgid "" "This platform has just been redesigned to improve its efficiency and " "usability." msgstr "" #: share/advertising/27.pl:21 #, c-format msgid "Stop by today at store.mandrakesoft.com!" msgstr "" #: share/advertising/28.pl:13 #, fuzzy, c-format msgid "Mandrakeclub" msgstr "Цэнтар кіраваньня" #: share/advertising/28.pl:15 #, c-format msgid "" "Mandrakeclub is the perfect companion to your Mandrakelinux " "product.." msgstr "" #: share/advertising/28.pl:17 #, c-format msgid "" "Take advantage of valuable benefits by joining Mandrakeclub, such as:" msgstr "" #: share/advertising/28.pl:18 #, c-format msgid "" "\t* Special discounts on products and services of our online store " "store.mandrakesoft.com." msgstr "" #: share/advertising/28.pl:19 #, c-format msgid "" "\t* Access to commercial applications (for example to NVIDIA® or ATI™ " "drivers)." msgstr "" #: share/advertising/28.pl:20 #, c-format msgid "\t* Participation in Mandrakelinux user forums." msgstr "" #: share/advertising/28.pl:21 #, c-format msgid "" "\t* Early and privileged access, before public release, to " "Mandrakelinux ISO images." msgstr "" #: share/advertising/29.pl:13 #, fuzzy, c-format msgid "Mandrakeonline" msgstr "Цэнтар кіраваньня" #: share/advertising/29.pl:15 #, c-format msgid "" "Mandrakeonline is a new premium service that Mandrakesoft is proud to " "offer its customers!" msgstr "" #: share/advertising/29.pl:17 #, c-format msgid "" "Mandrakeonline provides a wide range of valuable services for easily " "updating your Mandrakelinux systems:" msgstr "" #: share/advertising/29.pl:18 #, c-format msgid "\t* Perfect system security (automated software updates)." msgstr "" #: share/advertising/29.pl:19 #, c-format msgid "" "\t* Notification of updates (by e-mail or by an applet on the " "desktop)." msgstr "" #: share/advertising/29.pl:20 #, c-format msgid "\t* Flexible scheduled updates." msgstr "" #: share/advertising/29.pl:21 #, c-format msgid "" "\t* Management of all your Mandrakelinux systems with one account." msgstr "" #: share/advertising/30.pl:13 #, fuzzy, c-format msgid "Mandrakeexpert" msgstr "Цэнтар кіраваньня" #: share/advertising/30.pl:15 #, c-format msgid "" "Do you require assistance? Meet Mandrakesoft's technical experts on " "our technical support platform www.mandrakeexpert.com." msgstr "" #: share/advertising/30.pl:17 #, c-format msgid "" "Thanks to the help of qualified Mandrakelinux experts, you will save " "a lot of time." msgstr "" #: share/advertising/30.pl:19 #, c-format msgid "" "For any question related to Mandrakelinux, you have the possibility to " "purchase support incidents at store.mandrakesoft.com." msgstr "" #: share/compssUsers.pl:25 #, fuzzy, c-format msgid "Office Workstation" msgstr "Працоўныя мейсцы" #: share/compssUsers.pl:27 #, c-format msgid "" "Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets " "(OpenOffice.org Calc, Kspread), PDF viewers, etc" msgstr "" "Офісныя праграмы: працэсары словаў (OpenOffice.org Writer, Kword), " "электроныя табліцы, аглядальнікі pdf-файлаў, і г.д." #: share/compssUsers.pl:28 #, c-format msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "Офісныя праграмы: працэсары словаў (kword, abiword), электроныя табліцы, " "аглядальнікі pdf-файлаў, і г.д." #: share/compssUsers.pl:33 #, fuzzy, c-format msgid "Game station" msgstr "Аўтэнтыфікацыя" #: share/compssUsers.pl:34 #, c-format msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "Забаўляльныя праграмы: аркады, стратэгіі і г.д." #: share/compssUsers.pl:37 #, fuzzy, c-format msgid "Multimedia station" msgstr "Мульцімедыя" #: share/compssUsers.pl:38 #, c-format msgid "Sound and video playing/editing programs" msgstr "Рэдактары і прайгравальнікі гуку і відэа" #: share/compssUsers.pl:43 #, fuzzy, c-format msgid "Internet station" msgstr "Інтэрнэт" #: share/compssUsers.pl:44 #, c-format msgid "" "Set of tools to read and send mail and news (mutt, tin..) and to browse the " "Web" msgstr "" #: share/compssUsers.pl:49 #, fuzzy, c-format msgid "Network Computer (client)" msgstr "Сеткавы прынтэр (TCP/Socket)" #: share/compssUsers.pl:50 #, c-format msgid "Clients for different protocols including ssh" msgstr "" #: share/compssUsers.pl:54 #, c-format msgid "Configuration" msgstr "Канфігурацыя" #: share/compssUsers.pl:55 #, fuzzy, c-format msgid "Tools to ease the configuration of your computer" msgstr "Ці жадаеце пратэсціраваць настройкі?" #: share/compssUsers.pl:59 #, c-format msgid "Console Tools" msgstr "Кансольныя інструментальныя сродкі" #: share/compssUsers.pl:60 #, c-format msgid "Editors, shells, file tools, terminals" msgstr "Рэдактары, абалонкі, тэрміналы" #: share/compssUsers.pl:65 share/compssUsers.pl:165 #, c-format msgid "C and C++ development libraries, programs and include files" msgstr "Бібліятэкі і праграмы для распрацоўкі на С і С++" #: share/compssUsers.pl:69 share/compssUsers.pl:169 #, c-format msgid "Documentation" msgstr "Дакумэнтацыя" #: share/compssUsers.pl:70 share/compssUsers.pl:170 #, c-format msgid "Books and Howto's on Linux and Free Software" msgstr "нігі і Howto па Linux і Free Software" #: share/compssUsers.pl:74 share/compssUsers.pl:173 #, c-format msgid "LSB" msgstr "" #: share/compssUsers.pl:75 share/compssUsers.pl:174 #, c-format msgid "Linux Standard Base. Third party applications support" msgstr "" #: share/compssUsers.pl:85 #, fuzzy, c-format msgid "Apache" msgstr "Шлях:" #: share/compssUsers.pl:88 #, fuzzy, c-format msgid "Groupware" msgstr "Групы" #: share/compssUsers.pl:89 #, fuzzy, c-format msgid "Kolab Server" msgstr "NIS сэервер:" #: share/compssUsers.pl:92 share/compssUsers.pl:133 #, fuzzy, c-format msgid "Firewall/Router" msgstr "Рэстарт" #: share/compssUsers.pl:93 share/compssUsers.pl:134 #, fuzzy, c-format msgid "Internet gateway" msgstr "Інтэрнэт" #: share/compssUsers.pl:96 #, fuzzy, c-format msgid "Mail/News" msgstr "/Файл/_Стварыць" #: share/compssUsers.pl:97 #, c-format msgid "Postfix mail server, Inn news server" msgstr "" #: share/compssUsers.pl:100 #, fuzzy, c-format msgid "Directory Server" msgstr "Каталог %s Так" #: share/compssUsers.pl:104 #, fuzzy, c-format msgid "FTP Server" msgstr "NIS сэервер:" #: share/compssUsers.pl:105 #, c-format msgid "ProFTPd" msgstr "" #: share/compssUsers.pl:108 #, c-format msgid "DNS/NIS" msgstr "" #: share/compssUsers.pl:109 #, fuzzy, c-format msgid "Domain Name and Network Information Server" msgstr "Імя дамену" #: share/compssUsers.pl:112 #, fuzzy, c-format msgid "File and Printer Sharing Server" msgstr "Сервер друку" #: share/compssUsers.pl:113 #, fuzzy, c-format msgid "NFS Server, Samba server" msgstr "X сэервер" #: share/compssUsers.pl:116 share/compssUsers.pl:129 #, c-format msgid "Database" msgstr "База даньняў" #: share/compssUsers.pl:117 #, c-format msgid "PostgreSQL and MySQL Database Server" msgstr "" #: share/compssUsers.pl:121 #, c-format msgid "Web/FTP" msgstr "" #: share/compssUsers.pl:122 #, c-format msgid "Apache, Pro-ftpd" msgstr "" #: share/compssUsers.pl:125 #, c-format msgid "Mail" msgstr "Пошта" #: share/compssUsers.pl:126 #, c-format msgid "Postfix mail server" msgstr "" #: share/compssUsers.pl:130 #, c-format msgid "PostgreSQL or MySQL database server" msgstr "" #: share/compssUsers.pl:137 #, fuzzy, c-format msgid "Network Computer server" msgstr "Сеткавыя інтэрфэйсы" #: share/compssUsers.pl:138 #, c-format msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "" #: share/compssUsers.pl:146 #, fuzzy, c-format msgid "KDE Workstation" msgstr "Канфігурацыя" #: share/compssUsers.pl:147 #, c-format msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "" "The K Desktop Environment - асноўнае графічнае асяродзе з калекцыяй " "інструментальных сродкаў" #: share/compssUsers.pl:151 #, fuzzy, c-format msgid "GNOME Workstation" msgstr "Інфармацыя аб памяці" #: share/compssUsers.pl:152 #, c-format msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "" "Графічнае асяродзе са зручным дзеля выкарыстання наборам прыкладанняў і " "інструментальных сродкаў" #: share/compssUsers.pl:155 #, c-format msgid "Other Graphical Desktops" msgstr "Іншыя графічныя Працоўныя сталы" #: share/compssUsers.pl:156 #, c-format msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "" #: share/compssUsers.pl:179 #, c-format msgid "Utilities" msgstr "Карыснасьці" #: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:381 #, fuzzy, c-format msgid "SSH Server" msgstr "NIS сэервер:" #: share/compssUsers.pl:186 #, fuzzy, c-format msgid "Webmin" msgstr "Прылады" #: share/compssUsers.pl:187 #, fuzzy, c-format msgid "Webmin Remote Configuration Server" msgstr "Сістэмнае адміністраваньне" #: share/compssUsers.pl:191 #, fuzzy, c-format msgid "Network Utilities/Monitoring" msgstr "Канфігурацыя сеткі" #: share/compssUsers.pl:192 #, c-format msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..." msgstr "" #: share/compssUsers.pl:196 #, fuzzy, c-format msgid "Mandrakesoft Wizards" msgstr "Цэнтар кіраваньня" #: share/compssUsers.pl:197 #, fuzzy, c-format msgid "Wizards to configure server" msgstr "Немагчыма выдаліць \"%s\": %s." #: share/compssUsers.pl.~1.8.~:196 #, fuzzy, c-format msgid "MandrakeSoft Wizards" msgstr "Цэнтар кіраваньня" #: standalone.pm:21 #, fuzzy, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" "Пашырэнне ESounD\n" "\n" " Гэта прога - бясплатнае праграмнае забяспячэнне; вы можыце распаўсюджываць " "і/альбо мадыфікаваць яго\n" "у адпаведнасці з ліцэнзыяй GNU, якая была надрукавана\n" "Арганізацыяй бясплатнага праграмнага забеспячэння, вы можыце карыстацца " "версыяй 2 ліцэнзыі альбо\n" "(па вашаму жаданню) ці якой іншай пазнейшай версыяй.\n" "\n" "Гэта прога распаўсюджываецца з надзеяй, што камусці яна будзе карысна,\n" "але БЯЗЬ УСЯЛЯКІХ ГАРАНТЫЙ нават гарантый якія маюцца на ўвазе пры\n" "ПРАЦАЗДОЛЬНАСЦІ альбо ПРЫГОДНАСЦІ ДА ЯКОЙСЦІ МЭТЫ. Калі ласка,\n" "за падрабязнасцямі глянце на GNU ліцэнзыю.\n" "\n" "А копію ліцэнзыі вы павінны былі атрымаць\n" "разам зь гэтай прогай; калі не, дык напішыце пра гэта па адрасу (дашлем)\n" "Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA " "02111-1307,\n" "USA." #: standalone.pm:40 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" #: standalone.pm:52 #, c-format msgid "" "[--boot] [--splash]\n" "OPTIONS:\n" " --boot - enable to configure boot loader\n" " --splash - enable to configure boot theme\n" "default mode: offer to configure autologin feature" msgstr "" #: standalone.pm:57 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrakelinux tools\n" " --incident - program should be one of mandrakelinux tools" msgstr "" #: standalone.pm:63 #, c-format msgid "" "[--add]\n" " --add - \"add a network interface\" wizard\n" " --del - \"delete a network interface\" wizard\n" " --skip-wizard - manage connections\n" " --internet - configure internet\n" " --wizard - like --add" msgstr "" #: standalone.pm:69 #, c-format msgid "" "\n" "Font Importation and monitoring application\n" "\n" "OPTIONS:\n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--install : accept any font file and any directory.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" #: standalone.pm:84 #, c-format msgid "" "[OPTIONS]...\n" "Mandrakelinux Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" #: standalone.pm:96 #, fuzzy, c-format msgid "[keyboard]" msgstr "Клавіятура" #: standalone.pm:97 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "" #: standalone.pm:98 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : do not be interactive. To be used with (dis)connect." msgstr "" #: standalone.pm:107 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr "" #: standalone.pm:108 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation do not ask first confirmation question in " "MandrakeUpdate mode\n" " --no-verify-rpm do not verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" #: standalone.pm:113 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" #: standalone.pm:114 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" #: standalone.pm:133 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" #: standalone/XFdrake:61 #, fuzzy, c-format msgid "You need to reboot for changes to take effect" msgstr "Каб змяненні ўступілі ў дзеянне, необходна перазагрузіцца" #: standalone/XFdrake:92 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "Калі ласка, выйдзіце, а потым скарыстайце Ctrl-Alt-BackSpace" #: standalone/XFdrake:96 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "" #: standalone/drakTermServ:74 #, c-format msgid "Useless without Terminal Server" msgstr "" #: standalone/drakTermServ:106 standalone/drakTermServ:112 #, fuzzy, c-format msgid "%s: %s requires a username...\n" msgstr "%s: параметр ‛%s’ патрабуе аргумент\n" #: standalone/drakTermServ:123 #, c-format msgid "" "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, " "0/1 for Local Config...\n" msgstr "" #: standalone/drakTermServ:129 #, fuzzy, c-format msgid "%s: %s requires hostname...\n" msgstr "%s: параметр ‛%s’ патрабуе аргумент\n" #: standalone/drakTermServ:211 standalone/drakTermServ:214 #, fuzzy, c-format msgid "Terminal Server Configuration" msgstr "Сістэмнае адміністраваньне" #: standalone/drakTermServ:220 #, fuzzy, c-format msgid "Enable Server" msgstr "Сервер друку" #: standalone/drakTermServ:226 #, fuzzy, c-format msgid "Disable Server" msgstr "Сервер друку" #: standalone/drakTermServ:232 #, fuzzy, c-format msgid "Start Server" msgstr "NIS сэервер:" #: standalone/drakTermServ:238 #, fuzzy, c-format msgid "Stop Server" msgstr "Праграма гуказапісу" #: standalone/drakTermServ:247 #, c-format msgid "Etherboot Floppy/ISO" msgstr "" #: standalone/drakTermServ:251 #, c-format msgid "Net Boot Images" msgstr "" #: standalone/drakTermServ:258 #, fuzzy, c-format msgid "Add/Del Users" msgstr "Дадаць карыстальніка" #: standalone/drakTermServ:262 #, fuzzy, c-format msgid "Add/Del Clients" msgstr "Калькулятар" #: standalone/drakTermServ:270 #, c-format msgid "Images" msgstr "Выявы" #: standalone/drakTermServ:271 #, c-format msgid "Clients/Users" msgstr "" #: standalone/drakTermServ:289 standalone/drakbug:47 #, c-format msgid "First Time Wizard" msgstr "" #: standalone/drakTermServ:325 standalone/drakTermServ:326 #, c-format msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$" msgstr "" #: standalone/drakTermServ:332 #, c-format msgid "" "\n" " This wizard routine will:\n" " \t1) Ask you to select either 'thin' or 'fat' clients.\n" "\t2) Setup DHCP.\n" "\t\n" "After doing these steps, the wizard will:\n" "\t\n" " a) Make all " "nbis. \n" " b) Activate the " "server. \n" " c) Start the " "server. \n" " d) Synchronize the shadow files so that all users, including root, \n" " are added to the shadow$$CLIENT$$ " "file. \n" " e) Ask you to make a boot floppy.\n" " f) If it's thin clients, ask if you want to restart KDM.\n" msgstr "" #: standalone/drakTermServ:377 #, fuzzy, c-format msgid "Cancel Wizard" msgstr "Адмена" #: standalone/drakTermServ:392 #, c-format msgid "Please save dhcpd config!" msgstr "" #: standalone/drakTermServ:420 #, c-format msgid "Use thin clients." msgstr "" #: standalone/drakTermServ:422 #, c-format msgid "Sync client X keyboard settings with server." msgstr "" #: standalone/drakTermServ:424 #, c-format msgid "" "Please select default client type.\n" " 'Thin' clients run everything off the server's CPU/RAM, using the client " "display.\n" " 'Fat' clients use their own CPU/RAM but the server's filesystem." msgstr "" #: standalone/drakTermServ:444 #, c-format msgid "Creating net boot images for all kernels" msgstr "" #: standalone/drakTermServ:445 standalone/drakTermServ:747 #: standalone/drakTermServ:764 #, c-format msgid "This will take a few minutes." msgstr "" #: standalone/drakTermServ:449 standalone/drakTermServ:468 #, fuzzy, c-format msgid "Done!" msgstr "Зроблена" #: standalone/drakTermServ:454 #, c-format msgid "Syncing server user list with client list, including root." msgstr "" #: standalone/drakTermServ:474 #, c-format msgid "" "In order to enable changes made for thin clients, the display manager must " "be restarted. Restart now?" msgstr "" #: standalone/drakTermServ:509 #, fuzzy, c-format msgid "Terminal Server Overview" msgstr "Сістэмнае адміністраваньне" #: standalone/drakTermServ:510 #, c-format msgid "" " - Create Etherboot Enabled Boot Images:\n" " \tTo boot a kernel via etherboot, a special kernel/initrd image must " "be created.\n" " \tmkinitrd-net does much of this work and drakTermServ is just a " "graphical \n" " \tinterface to help manage/customize these images. To create the " "file \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " "include in \n" " \tdhcpd.conf, you should create the etherboot images for at least " "one full kernel." msgstr "" #: standalone/drakTermServ:516 #, c-format msgid "" " - Maintain /etc/dhcpd.conf:\n" " \tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP \n" " \taddress and net boot images to the machine. drakTermServ helps " "create/remove \n" " \tthese entries.\n" "\t\t\t\n" " \t(PCI cards may omit the image - etherboot will request the correct " "image. \n" "\t\t\tYou should also consider that when etherboot looks for the images, it " "expects \n" "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \tA typical dhcpd.conf stanza to support a diskless client looks " "like:" msgstr "" #: standalone/drakTermServ:534 #, c-format msgid "" " While you can use a pool of IP addresses, rather than setup a " "specific entry for\n" " a client machine, using a fixed address scheme facilitates using the " "functionality\n" " of client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" " Note: The '#type' entry is only used by drakTermServ. Clients can " "either be 'thin'\n" " or 'fat'. Thin clients run most software on the server via XDMCP, " "while fat clients run \n" " most software on the client machine. A special inittab, %s is\n" " written for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are \n" " modified if thin clients are used, to enable XDMCP. Since there are " "security issues in \n" " using XDMCP, hosts.deny and hosts.allow are modified to limit access " "to the local\n" " subnet.\n" "\t\t\t\n" " Note: The '#hdw_config' entry is also only used by drakTermServ. " "Clients can either \n" " be 'true' or 'false'. 'true' enables root login at the client " "machine and allows local \n" " hardware configuration of sound, mouse, and X, using the 'drak' " "tools. This is enabled \n" " by creating separate config files associated with the client's IP " "address and creating \n" " read/write mount points to allow the client to alter the file. Once " "you are satisfied \n" " with the configuration, you can remove root login privileges from " "the client.\n" "\t\t\t\n" " Note: You must stop/start the server after adding or changing " "clients." msgstr "" #: standalone/drakTermServ:554 #, c-format msgid "" " - Maintain /etc/exports:\n" " \tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \tdiskless clients.\n" "\n" " \tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" " \tWith SUBNET/MASK being defined for your network." msgstr "" #: standalone/drakTermServ:566 #, c-format msgid "" " - Maintain %s:\n" " \tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" " \thelps in this respect by adding or removing system users from this " "file." msgstr "" #: standalone/drakTermServ:570 #, c-format msgid "" " - Per client %s:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tdrakTermServ will help create these files." msgstr "" #: standalone/drakTermServ:575 #, c-format msgid "" " - Per client system configuration files:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tclients can customize files such as /etc/modules.conf, /etc/" "sysconfig/mouse, \n" " \t/etc/sysconfig/keyboard on a per-client basis.\n" "\n" " Note: Enabling local client hardware configuration does enable root " "login to the terminal \n" " server on each client machine that has this feature enabled. Local " "configuration can be\n" " turned back off, retaining the configuration files, once the client " "machine is configured." msgstr "" #: standalone/drakTermServ:584 #, c-format msgid "" " - /etc/xinetd.d/tftp:\n" " \tdrakTermServ will configure this file to work in conjunction with " "the images created\n" " \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to \n" " \teach diskless client.\n" "\n" " \tA typical TFTP configuration file looks like:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \tThe changes here from the default installation are changing the " "disable flag to\n" " \t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \tputs its images." msgstr "" #: standalone/drakTermServ:605 #, c-format msgid "" " - Create etherboot floppies/CDs:\n" " \tThe diskless client machines need either ROM images on the NIC, or " "a boot floppy\n" " \tor CD to initiate the boot sequence. drakTermServ will help " "generate these\n" " \timages, based on the NIC in the client machine.\n" " \t\t\n" " \tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \tcat /usr/lib/etherboot/floppyload.bin \\\n" " \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n" " \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0" msgstr "" #: standalone/drakTermServ:640 #, c-format msgid "Boot Floppy" msgstr "" #: standalone/drakTermServ:642 #, fuzzy, c-format msgid "Boot ISO" msgstr "Манітор" #: standalone/drakTermServ:644 #, fuzzy, c-format msgid "PXE Image" msgstr "Вобраз" #: standalone/drakTermServ:712 #, fuzzy, c-format msgid "Default kernel version" msgstr "Скура Па ўмаўчанні" #: standalone/drakTermServ:715 #, c-format msgid "Create PXE images." msgstr "" #: standalone/drakTermServ:745 #, c-format msgid "Build Whole Kernel -->" msgstr "" #: standalone/drakTermServ:753 #, fuzzy, c-format msgid "No kernel selected!" msgstr "Няма вузла каб выдаліць" #: standalone/drakTermServ:756 #, c-format msgid "Build Single NIC -->" msgstr "" #: standalone/drakTermServ:760 #, c-format msgid "No NIC selected!" msgstr "" #: standalone/drakTermServ:763 #, c-format msgid "Build All Kernels -->" msgstr "" #: standalone/drakTermServ:774 #, fuzzy, c-format msgid "<-- Delete" msgstr "Знішчыць" #: standalone/drakTermServ:779 #, fuzzy, c-format msgid "No image selected!" msgstr "Няма вузла каб выдаліць" #: standalone/drakTermServ:782 #, c-format msgid "Delete All NBIs" msgstr "" #: standalone/drakTermServ:908 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" #: standalone/drakTermServ:913 #, fuzzy, c-format msgid "Add User -->" msgstr "Дадаць карыстальніка" #: standalone/drakTermServ:919 #, c-format msgid "<-- Del User" msgstr "" #: standalone/drakTermServ:955 #, fuzzy, c-format msgid "type: %s" msgstr "Тып: " #: standalone/drakTermServ:959 #, c-format msgid "local config: %s" msgstr "" #: standalone/drakTermServ:989 #, fuzzy, c-format msgid "" "Allow local hardware\n" "configuration." msgstr "Канфігурацыя сістэмных сэрвісаў" #: standalone/drakTermServ:998 #, c-format msgid "No net boot images created!" msgstr "" #: standalone/drakTermServ:1017 #, fuzzy, c-format msgid "Thin Client" msgstr "Калькулятар" #: standalone/drakTermServ:1021 #, c-format msgid "Allow Thin Clients" msgstr "" #: standalone/drakTermServ:1022 #, c-format msgid "" "Sync client X keyboard\n" " settings with server." msgstr "" #: standalone/drakTermServ:1023 #, c-format msgid "Add Client -->" msgstr "" #: standalone/drakTermServ:1037 #, fuzzy, c-format msgid "type: fat" msgstr "Тып: " #: standalone/drakTermServ:1038 #, fuzzy, c-format msgid "type: thin" msgstr "Тып: " #: standalone/drakTermServ:1045 #, c-format msgid "local config: false" msgstr "" #: standalone/drakTermServ:1046 #, c-format msgid "local config: true" msgstr "" #: standalone/drakTermServ:1054 #, fuzzy, c-format msgid "<-- Edit Client" msgstr "Калькулятар" #: standalone/drakTermServ:1080 #, c-format msgid "Disable Local Config" msgstr "" #: standalone/drakTermServ:1087 #, fuzzy, c-format msgid "Delete Client" msgstr "Выдаліць пункт" #: standalone/drakTermServ:1096 #, fuzzy, c-format msgid "dhcpd Config..." msgstr "Настройка IDE" #: standalone/drakTermServ:1111 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" #: standalone/drakTermServ:1156 #, c-format msgid "Thin clients will not work with autologin. Disable autologin?" msgstr "" #: standalone/drakTermServ:1172 #, c-format msgid "All clients will use %s" msgstr "" #: standalone/drakTermServ:1204 #, fuzzy, c-format msgid "Subnet:" msgstr "Сіні" #: standalone/drakTermServ:1211 #, fuzzy, c-format msgid "Netmask:" msgstr "Маска сеткі" #: standalone/drakTermServ:1218 #, c-format msgid "Routers:" msgstr "" #: standalone/drakTermServ:1225 #, c-format msgid "Subnet Mask:" msgstr "" #: standalone/drakTermServ:1232 #, c-format msgid "Broadcast Address:" msgstr "" #: standalone/drakTermServ:1239 #, fuzzy, c-format msgid "Domain Name:" msgstr "Імя дамену" #: standalone/drakTermServ:1247 #, fuzzy, c-format msgid "Name Servers:" msgstr "NIS сэервер:" #: standalone/drakTermServ:1258 #, c-format msgid "IP Range Start:" msgstr "" #: standalone/drakTermServ:1259 #, c-format msgid "IP Range End:" msgstr "" #: standalone/drakTermServ:1301 #, c-format msgid "Append TS Includes To Existing Config" msgstr "" #: standalone/drakTermServ:1303 #, fuzzy, c-format msgid "Write Config" msgstr "Канфігурацыя" #: standalone/drakTermServ:1319 #, fuzzy, c-format msgid "dhcpd Server Configuration" msgstr "Канфігурацыя сістэмных сэрвісаў" #: standalone/drakTermServ:1320 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" #: standalone/drakTermServ:1323 #, c-format msgid "Dynamic IP Address Pool:" msgstr "" #: standalone/drakTermServ:1474 #, c-format msgid "Please insert floppy disk:" msgstr "" #: standalone/drakTermServ:1478 #, c-format msgid "Could not access the floppy!" msgstr "" #: standalone/drakTermServ:1480 #, c-format msgid "Floppy can be removed now" msgstr "" #: standalone/drakTermServ:1483 #, fuzzy, c-format msgid "No floppy drive available!" msgstr "Дыскавод недаступны" #: standalone/drakTermServ:1488 #, c-format msgid "PXE image is %s/%s" msgstr "" #: standalone/drakTermServ:1490 #, fuzzy, c-format msgid "Error writing %s/%s" msgstr "Памылка запісу ў файл %s" #: standalone/drakTermServ:1500 #, c-format msgid "Etherboot ISO image is %s" msgstr "" #: standalone/drakTermServ:1502 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "" #: standalone/drakTermServ:1523 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "" #: standalone/drakTermServ:1683 #, c-format msgid "%s passwd bad in Terminal Server - rewriting...\n" msgstr "" #: standalone/drakTermServ:1696 #, c-format msgid "%s is not a user..\n" msgstr "" #: standalone/drakTermServ:1697 #, c-format msgid "%s is already a Terminal Server user\n" msgstr "" #: standalone/drakTermServ:1699 #, c-format msgid "Addition of %s to Terminal Server failed!\n" msgstr "" #: standalone/drakTermServ:1701 #, fuzzy, c-format msgid "%s added to Terminal Server\n" msgstr "Сістэмнае адміністраваньне" #: standalone/drakTermServ:1718 #, fuzzy, c-format msgid "Deleted %s...\n" msgstr "Выдаліць" #: standalone/drakTermServ:1720 standalone/drakTermServ:1793 #, c-format msgid "%s not found...\n" msgstr "" #: standalone/drakTermServ:1821 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" #: standalone/drakTermServ:1961 #, c-format msgid "Configuration changed - restart clusternfs/dhcpd?" msgstr "" #: standalone/drakautoinst:38 #, c-format msgid "Error!" msgstr "Памылка!" #: standalone/drakautoinst:39 #, c-format msgid "I can not find needed image file `%s'." msgstr "" #: standalone/drakautoinst:41 #, fuzzy, c-format msgid "Auto Install Configurator" msgstr "Настройка пасля ўсталявання" #: standalone/drakautoinst:42 #, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Press ok to continue." msgstr "" #: standalone/drakautoinst:60 #, fuzzy, c-format msgid "replay" msgstr "Граць" #: standalone/drakautoinst:60 standalone/drakautoinst:69 #, fuzzy, c-format msgid "manual" msgstr "Студзень" #: standalone/drakautoinst:64 #, fuzzy, c-format msgid "Automatic Steps Configuration" msgstr "Канфігурацыя MIDI" #: standalone/drakautoinst:65 #, c-format msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" #: standalone/drakautoinst:77 standalone/drakautoinst:78 #: standalone/drakautoinst:92 #, fuzzy, c-format msgid "Creating auto install floppy" msgstr "Стварэнне дыскеты для ўсталявання" #: standalone/drakautoinst:90 #, fuzzy, c-format msgid "Insert another blank floppy in drive %s (for drivers disk)" msgstr "Устаўце дыскету ў дыскавод %s" #: standalone/drakautoinst:91 #, fuzzy, c-format msgid "Creating auto install floppy (drivers disk)" msgstr "Стварэнне дыскеты для ўсталявання" #: standalone/drakautoinst:158 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" #: standalone/drakautoinst:252 standalone/drakgw:597 standalone/drakvpn:902 #: standalone/scannerdrake:405 #, c-format msgid "Congratulations!" msgstr "Прыміце віншаванні!" #: standalone/drakautoinst:253 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" #: standalone/drakautoinst:289 #, fuzzy, c-format msgid "Auto Install" msgstr "Усталёўка" #: standalone/drakautoinst:358 #, fuzzy, c-format msgid "Add an item" msgstr "Дадаць атрыбут" #: standalone/drakautoinst:365 #, fuzzy, c-format msgid "Remove the last item" msgstr "/Выдаліць дохлыя файлы" #: standalone/drakbackup:88 #, fuzzy, c-format msgid "hd" msgstr "Чад" #: standalone/drakbackup:88 #, fuzzy, c-format msgid "tape" msgstr "Іншае" #: standalone/drakbackup:152 #, c-format msgid "" "Expect is an extension to the TCL scripting language that allows interactive " "sessions without user intervention." msgstr "" #: standalone/drakbackup:153 #, c-format msgid "Store the password for this system in drakbackup configuration." msgstr "" #: standalone/drakbackup:154 #, c-format msgid "" "For a multisession CD, only the first session will erase the cdrw. Otherwise " "the cdrw is erased before each backup." msgstr "" #: standalone/drakbackup:155 #, c-format msgid "" "This option will save files that have changed. Exact behavior depends on " "whether incremental or differential mode is used." msgstr "" #: standalone/drakbackup:156 #, c-format msgid "" "Incremental backups only save files that have changed or are new since the " "last backup." msgstr "" #: standalone/drakbackup:157 #, c-format msgid "" "Differential backups only save files that have changed or are new since the " "original 'base' backup." msgstr "" #: standalone/drakbackup:158 #, c-format msgid "" "This should be a local user or email address that you want the backup " "results sent to. You will need to define a functioning mail server." msgstr "" #: standalone/drakbackup:159 #, c-format msgid "" "Files or wildcards listed in a .backupignore file at the top of a directory " "tree will not be backed up." msgstr "" #: standalone/drakbackup:160 #, c-format msgid "" "For backups to other media, files are still created on the hard drive, then " "moved to the other media. Enabling this option will remove the hard drive " "tar files after the backup." msgstr "" #: standalone/drakbackup:161 #, c-format msgid "" "Some protocols, like rsync, may be configured at the server end. Rather " "than using a directory path, you would use the 'module' name for the service " "path." msgstr "" #: standalone/drakbackup:162 #, c-format msgid "" "Custom allows you to specify your own day and time. The other options use " "run-parts in /etc/crontab." msgstr "" #: standalone/drakbackup:326 #, c-format msgid "No media selected for cron operation." msgstr "" #: standalone/drakbackup:330 #, c-format msgid "No interval selected for cron operation." msgstr "" #: standalone/drakbackup:377 #, c-format msgid "Interval cron not available as non-root" msgstr "" #: standalone/drakbackup:462 standalone/logdrake:437 #, c-format msgid "\"%s\" neither is a valid email nor is an existing local user!" msgstr "" #: standalone/drakbackup:466 standalone/logdrake:442 #, c-format msgid "" "\"%s\" is a local user, but you did not select a local smtp, so you must use " "a complete email address!" msgstr "" #: standalone/drakbackup:475 #, c-format msgid "Valid user list changed, rewriting config file." msgstr "" #: standalone/drakbackup:477 #, fuzzy, c-format msgid "Old user list:\n" msgstr "Атрымаць спіс сервакоў" #: standalone/drakbackup:479 #, fuzzy, c-format msgid "New user list:\n" msgstr "Атрымаць спіс сервакоў" #: standalone/drakbackup:524 #, c-format msgid "" "\n" " DrakBackup Report \n" msgstr "" #: standalone/drakbackup:525 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" msgstr "" #: standalone/drakbackup:531 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" #: standalone/drakbackup:556 standalone/drakbackup:627 #: standalone/drakbackup:683 #, c-format msgid "Total progress" msgstr "" #: standalone/drakbackup:609 #, c-format msgid "" "%s exists, delete?\n" "\n" "If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" #: standalone/drakbackup:618 #, c-format msgid "This may take a moment to generate the keys." msgstr "" #: standalone/drakbackup:625 #, fuzzy, c-format msgid "Cannot spawn %s." msgstr "Немагчыма зачыніць каталёг: %s" #: standalone/drakbackup:642 #, c-format msgid "No password prompt on %s at port %s" msgstr "" #: standalone/drakbackup:643 #, fuzzy, c-format msgid "Bad password on %s" msgstr "Няма паролю" #: standalone/drakbackup:644 #, c-format msgid "Permission denied transferring %s to %s" msgstr "" #: standalone/drakbackup:645 #, fuzzy, c-format msgid "Can not find %s on %s" msgstr "Не знойздены праграмы\n" #: standalone/drakbackup:649 #, c-format msgid "%s not responding" msgstr "" #: standalone/drakbackup:653 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s@%s\n" "\n" "without being prompted for a password." msgstr "" #: standalone/drakbackup:697 #, c-format msgid "WebDAV remote site already in sync!" msgstr "" #: standalone/drakbackup:701 #, c-format msgid "WebDAV transfer failed!" msgstr "" #: standalone/drakbackup:722 #, c-format msgid "No CD-R/DVD-R in drive!" msgstr "" #: standalone/drakbackup:726 #, c-format msgid "Does not appear to be recordable media!" msgstr "" #: standalone/drakbackup:731 #, c-format msgid "Not erasable media!" msgstr "" #: standalone/drakbackup:773 #, c-format msgid "This may take a moment to erase the media." msgstr "" #: standalone/drakbackup:831 #, c-format msgid "Permission problem accessing CD." msgstr "" #: standalone/drakbackup:858 #, fuzzy, c-format msgid "No tape in %s!" msgstr "Дапаўненьні" #: standalone/drakbackup:965 #, c-format msgid "" "Backup quota exceeded!\n" "%d MB used vs %d MB allocated." msgstr "" #: standalone/drakbackup:984 standalone/drakbackup:1017 #, c-format msgid "Backup system files..." msgstr "" #: standalone/drakbackup:1018 standalone/drakbackup:1059 #, fuzzy, c-format msgid "Hard Disk Backup files..." msgstr "Дрэнны файл рэзервовай копіі" #: standalone/drakbackup:1058 #, fuzzy, c-format msgid "Backup User files..." msgstr "Зададзена карыстальнікам..." #: standalone/drakbackup:1093 #, fuzzy, c-format msgid "Backup Other files..." msgstr "Дрэнны файл рэзервовай копіі" #: standalone/drakbackup:1094 #, c-format msgid "Hard Disk Backup Progress..." msgstr "" #: standalone/drakbackup:1099 #, c-format msgid "No changes to backup!" msgstr "" #: standalone/drakbackup:1117 standalone/drakbackup:1141 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" #: standalone/drakbackup:1126 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" #: standalone/drakbackup:1127 #, c-format msgid "" "Error during sending file via FTP. Please correct your FTP configuration." msgstr "" #: standalone/drakbackup:1129 #, c-format msgid "file list sent by FTP: %s\n" msgstr "" #: standalone/drakbackup:1146 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" #: standalone/drakbackup:1151 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" #: standalone/drakbackup:1160 #, c-format msgid "Error sending mail. Your report mail was not sent." msgstr "" #: standalone/drakbackup:1161 #, fuzzy, c-format msgid " Error while sending mail. \n" msgstr "" "Памылка аналіза\n" " канфігурацыйнага файла." #: standalone/drakbackup:1191 #, fuzzy, c-format msgid "Can not create catalog!" msgstr "Немагчыма запісаць тэг!" #: standalone/drakbackup:1420 #, c-format msgid "" "\n" "Please check all options that you need.\n" msgstr "" #: standalone/drakbackup:1421 #, c-format msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" #: standalone/drakbackup:1422 #, c-format msgid "Backup your System files. (/etc directory)" msgstr "" #: standalone/drakbackup:1423 standalone/drakbackup:1487 #: standalone/drakbackup:1553 #, c-format msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "" #: standalone/drakbackup:1425 standalone/drakbackup:1489 #: standalone/drakbackup:1555 #, fuzzy, c-format msgid "Use Incremental Backups" msgstr "Інструмэнтальны Рок" #: standalone/drakbackup:1425 standalone/drakbackup:1489 #: standalone/drakbackup:1555 #, c-format msgid "Use Differential Backups" msgstr "" #: standalone/drakbackup:1427 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "" #: standalone/drakbackup:1428 #, c-format msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" #: standalone/drakbackup:1459 #, c-format msgid "Please check all users that you want to include in your backup." msgstr "" #: standalone/drakbackup:1486 #, fuzzy, c-format msgid "Do not include the browser cache" msgstr "Настроіць проксі сэрвэры" #: standalone/drakbackup:1540 #, c-format msgid "Select the files or directories and click on 'OK'" msgstr "" #: standalone/drakbackup:1541 standalone/drakfont:661 #, fuzzy, c-format msgid "Remove Selected" msgstr "/Выдаліць/Выбранае" #: standalone/drakbackup:1604 #, c-format msgid "Users" msgstr "Карыстальнікі" #: standalone/drakbackup:1624 #, c-format msgid "Use network connection to backup" msgstr "" #: standalone/drakbackup:1626 #, c-format msgid "Net Method:" msgstr "" #: standalone/drakbackup:1630 #, c-format msgid "Use Expect for SSH" msgstr "" #: standalone/drakbackup:1631 #, c-format msgid "Create/Transfer backup keys for SSH" msgstr "" #: standalone/drakbackup:1633 #, c-format msgid "Transfer Now" msgstr "" #: standalone/drakbackup:1635 #, c-format msgid "Other (not drakbackup) keys in place already" msgstr "" #: standalone/drakbackup:1638 #, fuzzy, c-format msgid "Host name or IP." msgstr "Імя машыны" #: standalone/drakbackup:1643 #, c-format msgid "Directory (or module) to put the backup on this host." msgstr "" #: standalone/drakbackup:1655 #, c-format msgid "Remember this password" msgstr "Запомніць гэты пароль" #: standalone/drakbackup:1671 #, c-format msgid "Need hostname, username and password!" msgstr "" #: standalone/drakbackup:1762 #, c-format msgid "Use CD-R/DVD-R to backup" msgstr "" #: standalone/drakbackup:1765 #, c-format msgid "Choose your CD/DVD device" msgstr "" #: standalone/drakbackup:1770 #, fuzzy, c-format msgid "Choose your CD/DVD media size" msgstr "Выберыце ваш стыль меню :" #: standalone/drakbackup:1777 #, c-format msgid "Multisession CD" msgstr "" #: standalone/drakbackup:1779 #, c-format msgid "CDRW media" msgstr "" #: standalone/drakbackup:1785 #, c-format msgid "Erase your RW media (1st Session)" msgstr "" #: standalone/drakbackup:1786 #, c-format msgid " Erase Now " msgstr "" #: standalone/drakbackup:1792 #, c-format msgid "DVD+RW media" msgstr "" #: standalone/drakbackup:1794 #, c-format msgid "DVD-R media" msgstr "" #: standalone/drakbackup:1796 #, fuzzy, c-format msgid "DVDRAM device" msgstr "CD-ROM прылада" #: standalone/drakbackup:1827 #, c-format msgid "No CD device defined!" msgstr "" #: standalone/drakbackup:1869 #, c-format msgid "Use tape to backup" msgstr "" #: standalone/drakbackup:1872 #, c-format msgid "Device name to use for backup" msgstr "" #: standalone/drakbackup:1878 #, c-format msgid "Backup directly to tape" msgstr "" #: standalone/drakbackup:1884 #, c-format msgid "Do not rewind tape after backup" msgstr "" #: standalone/drakbackup:1890 #, c-format msgid "Erase tape before backup" msgstr "" #: standalone/drakbackup:1896 #, c-format msgid "Eject tape after the backup" msgstr "" #: standalone/drakbackup:1968 #, fuzzy, c-format msgid "Enter the directory to save to:" msgstr "Выбраць каталог для дадатку" #: standalone/drakbackup:1972 #, fuzzy, c-format msgid "Directory to save to" msgstr "Каталог %s Так" #: standalone/drakbackup:1977 #, c-format msgid "" "Maximum size\n" " allowed for Drakbackup (MB)" msgstr "" #: standalone/drakbackup:2041 #, c-format msgid "CD-R / DVD-R" msgstr "" #: standalone/drakbackup:2046 #, fuzzy, c-format msgid "HardDrive / NFS" msgstr "Мальды" #: standalone/drakbackup:2061 standalone/drakbackup:2062 #: standalone/drakbackup:2067 #, fuzzy, c-format msgid "hourly" msgstr "Кантры" #: standalone/drakbackup:2061 standalone/drakbackup:2063 #: standalone/drakbackup:2068 #, fuzzy, c-format msgid "daily" msgstr "Электронная пошта" #: standalone/drakbackup:2061 standalone/drakbackup:2064 #: standalone/drakbackup:2069 #, c-format msgid "weekly" msgstr "" #: standalone/drakbackup:2061 standalone/drakbackup:2065 #: standalone/drakbackup:2070 #, fuzzy, c-format msgid "monthly" msgstr "Месяц" #: standalone/drakbackup:2061 standalone/drakbackup:2066 #: standalone/drakbackup:2071 #, c-format msgid "custom" msgstr "карыстальнік" #: standalone/drakbackup:2075 #, c-format msgid "January" msgstr "Студзень" #: standalone/drakbackup:2075 #, c-format msgid "February" msgstr "Люты" #: standalone/drakbackup:2075 #, c-format msgid "March" msgstr "Сакавік" #: standalone/drakbackup:2076 #, c-format msgid "April" msgstr "Красавік" #: standalone/drakbackup:2076 #, c-format msgid "May" msgstr "Травень" #: standalone/drakbackup:2076 #, c-format msgid "June" msgstr "Чэрвень" #: standalone/drakbackup:2076 #, c-format msgid "July" msgstr "Ліпень" #: standalone/drakbackup:2076 #, c-format msgid "August" msgstr "Жнівень" #: standalone/drakbackup:2076 #, c-format msgid "September" msgstr "Верасень" #: standalone/drakbackup:2077 #, c-format msgid "October" msgstr "Кастрычнік" #: standalone/drakbackup:2077 #, c-format msgid "November" msgstr "Лістапад" #: standalone/drakbackup:2077 #, c-format msgid "December" msgstr "Сьнежань" #: standalone/drakbackup:2080 #, c-format msgid "Sunday" msgstr "Нядзеля" #: standalone/drakbackup:2080 #, c-format msgid "Monday" msgstr "Панядзелак" #: standalone/drakbackup:2080 #, c-format msgid "Tuesday" msgstr "Аўторак" #: standalone/drakbackup:2081 #, c-format msgid "Wednesday" msgstr "Серада" #: standalone/drakbackup:2081 #, c-format msgid "Thursday" msgstr "Чацьвер" #: standalone/drakbackup:2081 #, c-format msgid "Friday" msgstr "Пятніца" #: standalone/drakbackup:2081 #, c-format msgid "Saturday" msgstr "Субота" #: standalone/drakbackup:2113 #, fuzzy, c-format msgid "Use daemon" msgstr "Імя карыстальніка" #: standalone/drakbackup:2117 #, c-format msgid "Please choose the time interval between each backup" msgstr "" #: standalone/drakbackup:2123 #, c-format msgid "Custom setup/crontab entry:" msgstr "" #: standalone/drakbackup:2128 #, c-format msgid "Minute" msgstr "Хвіліна" #: standalone/drakbackup:2132 #, c-format msgid "Hour" msgstr "Гадзіна" #: standalone/drakbackup:2136 #, c-format msgid "Day" msgstr "Дзень" #: standalone/drakbackup:2140 #, c-format msgid "Month" msgstr "Месяц" #: standalone/drakbackup:2144 #, fuzzy, c-format msgid "Weekday" msgstr "Серада" #: standalone/drakbackup:2150 #, fuzzy, c-format msgid "Please choose the media for backup." msgstr "Калі ласка, абярыце тып клавіятуры." #: standalone/drakbackup:2156 #, c-format msgid "Please be sure that the cron daemon is included in your services." msgstr "" #: standalone/drakbackup:2157 #, c-format msgid "" "If your machine is not on all the time, you might want to install anacron." msgstr "" #: standalone/drakbackup:2158 #, c-format msgid "Note that currently all 'net' media also use the hard drive." msgstr "" #: standalone/drakbackup:2205 #, fuzzy, c-format msgid "Please choose the compression type" msgstr "калі ласка, пазначце тып вашай мышы." #: standalone/drakbackup:2209 #, fuzzy, c-format msgid "Use .backupignore files" msgstr "Дрэнны файл рэзервовай копіі" #: standalone/drakbackup:2211 #, c-format msgid "Send mail report after each backup to:" msgstr "" #: standalone/drakbackup:2217 #, fuzzy, c-format msgid "SMTP server for mail:" msgstr "Інфармацыя аб X-сэрвэры" #: standalone/drakbackup:2222 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "" #: standalone/drakbackup:2262 #, c-format msgid "What" msgstr "" #: standalone/drakbackup:2267 #, c-format msgid "Where" msgstr "Дзе" #: standalone/drakbackup:2272 #, fuzzy, c-format msgid "When" msgstr "З колам" #: standalone/drakbackup:2277 #, c-format msgid "More Options" msgstr "Болей выбараў" #: standalone/drakbackup:2290 #, c-format msgid "Backup destination not configured..." msgstr "" #: standalone/drakbackup:2310 standalone/drakbackup:4234 #, fuzzy, c-format msgid "Drakbackup Configuration" msgstr "Канфігурацыя" #: standalone/drakbackup:2326 #, fuzzy, c-format msgid "Please choose where you want to backup" msgstr "калі ласка, пазначце тып вашай мышы." #: standalone/drakbackup:2329 #, c-format msgid "Hard Drive used to prepare backups for all media" msgstr "" #: standalone/drakbackup:2329 #, fuzzy, c-format msgid "Across Network" msgstr "Сетка" #: standalone/drakbackup:2329 #, c-format msgid "On CD-R" msgstr "" #: standalone/drakbackup:2329 #, fuzzy, c-format msgid "On Tape Device" msgstr "USB прылады" #: standalone/drakbackup:2375 #, fuzzy, c-format msgid "Backup Users" msgstr "Карыстальнікі групы" #: standalone/drakbackup:2376 #, fuzzy, c-format msgid " (Default is all users)" msgstr " (Па дамаўленню)" #: standalone/drakbackup:2389 #, fuzzy, c-format msgid "Please choose what you want to backup" msgstr "калі ласка, пазначце тып вашай мышы." #: standalone/drakbackup:2390 #, fuzzy, c-format msgid "Backup System" msgstr "Сыстэма" #: standalone/drakbackup:2392 #, fuzzy, c-format msgid "Select user manually" msgstr "Пазначыць карыстальніцкі ID" #: standalone/drakbackup:2421 #, c-format msgid "Please select data to backup..." msgstr "" #: standalone/drakbackup:2493 #, c-format msgid "" "\n" "Backup Sources: \n" msgstr "" #: standalone/drakbackup:2494 #, fuzzy, c-format msgid "" "\n" "- System Files:\n" msgstr "Сыстэма" #: standalone/drakbackup:2496 #, c-format msgid "" "\n" "- User Files:\n" msgstr "" #: standalone/drakbackup:2498 #, c-format msgid "" "\n" "- Other Files:\n" msgstr "" #: standalone/drakbackup:2500 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" #: standalone/drakbackup:2501 #, c-format msgid "\tLimit disk usage to %s MB\n" msgstr "" #: standalone/drakbackup:2504 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" #: standalone/drakbackup:2509 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" #: standalone/drakbackup:2510 #, c-format msgid "RW" msgstr "" #: standalone/drakbackup:2511 #, fuzzy, c-format msgid " on device: %s" msgstr "Мыш: %s\n" #: standalone/drakbackup:2512 #, c-format msgid " (multi-session)" msgstr "" #: standalone/drakbackup:2513 #, fuzzy, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" "%s\n" "Немагчыма адчыніць файл: %s" #: standalone/drakbackup:2514 #, c-format msgid "\t\tErase=%s" msgstr "" #: standalone/drakbackup:2516 #, c-format msgid "\tBackup directly to Tape\n" msgstr "" #: standalone/drakbackup:2518 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" #: standalone/drakbackup:2519 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" #: standalone/drakbackup:2520 #, fuzzy, c-format msgid "" "\n" "- Options:\n" msgstr "Опцыі:" #: standalone/drakbackup:2521 #, c-format msgid "\tDo not include System Files\n" msgstr "" #: standalone/drakbackup:2523 #, c-format msgid "\tBackups use tar and bzip2\n" msgstr "" #: standalone/drakbackup:2524 #, c-format msgid "\tBackups use tar and gzip\n" msgstr "" #: standalone/drakbackup:2525 #, c-format msgid "\tBackups use tar only\n" msgstr "" #: standalone/drakbackup:2527 #, fuzzy, c-format msgid "\tUse .backupignore files\n" msgstr "Дрэнны файл рэзервовай копіі" #: standalone/drakbackup:2528 #, c-format msgid "\tSend mail to %s\n" msgstr "" #: standalone/drakbackup:2529 #, c-format msgid "\tUsing SMTP server %s\n" msgstr "" #: standalone/drakbackup:2531 #, c-format msgid "" "\n" "- Daemon, %s via:\n" msgstr "" #: standalone/drakbackup:2532 #, fuzzy, c-format msgid "\t-Hard drive.\n" msgstr "Мальды" #: standalone/drakbackup:2533 #, c-format msgid "\t-CD-R.\n" msgstr "" #: standalone/drakbackup:2534 #, c-format msgid "\t-Tape \n" msgstr "" #: standalone/drakbackup:2535 #, c-format msgid "\t-Network by FTP.\n" msgstr "" #: standalone/drakbackup:2536 #, c-format msgid "\t-Network by SSH.\n" msgstr "" #: standalone/drakbackup:2537 #, fuzzy, c-format msgid "\t-Network by rsync.\n" msgstr "Сеткавы проксі" #: standalone/drakbackup:2538 #, c-format msgid "\t-Network by webdav.\n" msgstr "" #: standalone/drakbackup:2540 #, c-format msgid "No configuration, please click Wizard or Advanced.\n" msgstr "" #: standalone/drakbackup:2545 #, c-format msgid "" "List of data to restore:\n" "\n" msgstr "" #: standalone/drakbackup:2547 #, c-format msgid "- Restore System Files.\n" msgstr "" #: standalone/drakbackup:2549 standalone/drakbackup:2559 #, c-format msgid " - from date: %s %s\n" msgstr "" #: standalone/drakbackup:2552 #, c-format msgid "- Restore User Files: \n" msgstr "" #: standalone/drakbackup:2557 #, c-format msgid "- Restore Other Files: \n" msgstr "" #: standalone/drakbackup:2736 #, c-format msgid "" "List of data corrupted:\n" "\n" msgstr "" #: standalone/drakbackup:2738 #, fuzzy, c-format msgid "Please uncheck or remove it on next time." msgstr "Калі ласка, пазначце послядоўны порт, да якога падключана вашая мыш." #: standalone/drakbackup:2748 #, c-format msgid "Backup files are corrupted" msgstr "" #: standalone/drakbackup:2769 #, c-format msgid " All of your selected data have been " msgstr "" #: standalone/drakbackup:2770 #, c-format msgid " Successfully Restored on %s " msgstr "" #: standalone/drakbackup:2890 #, fuzzy, c-format msgid " Restore Configuration " msgstr "Канфігурацыя" #: standalone/drakbackup:2918 #, c-format msgid "OK to restore the other files." msgstr "" #: standalone/drakbackup:2934 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "" #: standalone/drakbackup:2999 #, c-format msgid "Please choose the date to restore:" msgstr "" #: standalone/drakbackup:3036 #, c-format msgid "Restore from Hard Disk." msgstr "" #: standalone/drakbackup:3038 #, fuzzy, c-format msgid "Enter the directory where backups are stored" msgstr "Выберыце каталог у якім будзе захоўвацца MPEG:" #: standalone/drakbackup:3042 #, c-format msgid "Directory with backups" msgstr "" #: standalone/drakbackup:3096 #, c-format msgid "Select another media to restore from" msgstr "" #: standalone/drakbackup:3098 #, fuzzy, c-format msgid "Other Media" msgstr "Іншыя" #: standalone/drakbackup:3103 #, fuzzy, c-format msgid "Restore system" msgstr "Усталяванне сістэмы" #: standalone/drakbackup:3104 #, c-format msgid "Restore Users" msgstr "" #: standalone/drakbackup:3105 #, fuzzy, c-format msgid "Restore Other" msgstr "Рэстарт" #: standalone/drakbackup:3107 #, c-format msgid "Select path to restore (instead of /)" msgstr "" #: standalone/drakbackup:3111 standalone/drakbackup:3393 #, c-format msgid "Path To Restore To" msgstr "" #: standalone/drakbackup:3114 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "" #: standalone/drakbackup:3116 #, c-format msgid "Remove user directories before restore." msgstr "" #: standalone/drakbackup:3201 #, c-format msgid "Filename text substring to search for (empty string matches all):" msgstr "" #: standalone/drakbackup:3204 #, fuzzy, c-format msgid "Search Backups" msgstr "Шукаць: " #: standalone/drakbackup:3222 #, c-format msgid "No matches found..." msgstr "" #: standalone/drakbackup:3226 #, fuzzy, c-format msgid "Restore Selected" msgstr "/Выдаліць/Выбранае" #: standalone/drakbackup:3361 #, c-format msgid "" "Click date/time to see backup files.\n" "Ctrl-Click files to select multiple files." msgstr "" #: standalone/drakbackup:3367 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" #: standalone/drakbackup:3376 #, fuzzy, c-format msgid "" "Restore Selected\n" "Files" msgstr "/Выдаліць/Выбранае" #: standalone/drakbackup:3453 #, c-format msgid "Backup files not found at %s." msgstr "" #: standalone/drakbackup:3466 #, fuzzy, c-format msgid "Restore From CD" msgstr "Выдаліць з RAID" #: standalone/drakbackup:3466 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" #: standalone/drakbackup:3468 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "" #: standalone/drakbackup:3478 #, c-format msgid "Restore From Tape" msgstr "" #: standalone/drakbackup:3478 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" #: standalone/drakbackup:3480 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "" #: standalone/drakbackup:3491 #, c-format msgid "Restore Via Network" msgstr "" #: standalone/drakbackup:3491 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "" #: standalone/drakbackup:3492 #, c-format msgid "Host Name" msgstr "Назва вузла" #: standalone/drakbackup:3493 #, c-format msgid "Host Path or Module" msgstr "" #: standalone/drakbackup:3500 #, fuzzy, c-format msgid "Password required" msgstr "Настроіць паролі" #: standalone/drakbackup:3506 #, fuzzy, c-format msgid "Username required" msgstr "Імя карыстальніку:" #: standalone/drakbackup:3509 #, fuzzy, c-format msgid "Hostname required" msgstr "Імя машыны" #: standalone/drakbackup:3514 #, c-format msgid "Path or Module required" msgstr "" #: standalone/drakbackup:3527 #, c-format msgid "Files Restored..." msgstr "" #: standalone/drakbackup:3530 #, c-format msgid "Restore Failed..." msgstr "" #: standalone/drakbackup:3548 #, c-format msgid "%s not retrieved..." msgstr "" #: standalone/drakbackup:3770 standalone/drakbackup:3839 #, fuzzy, c-format msgid "Search for files to restore" msgstr "Адшукаць файлы на дыску" #: standalone/drakbackup:3774 #, c-format msgid "Restore all backups" msgstr "" #: standalone/drakbackup:3782 #, fuzzy, c-format msgid "Custom Restore" msgstr "Па выбару" #: standalone/drakbackup:3786 standalone/drakbackup:3835 #, c-format msgid "Restore From Catalog" msgstr "" #: standalone/drakbackup:3807 #, c-format msgid "Unable to find backups to restore...\n" msgstr "" #: standalone/drakbackup:3808 #, c-format msgid "Verify that %s is the correct path" msgstr "" #: standalone/drakbackup:3809 #, c-format msgid " and the CD is in the drive" msgstr "" #: standalone/drakbackup:3811 #, c-format msgid "Backups on unmountable media - Use Catalog to restore" msgstr "" #: standalone/drakbackup:3827 #, c-format msgid "CD in place - continue." msgstr "" #: standalone/drakbackup:3832 #, c-format msgid "Browse to new restore repository." msgstr "" #: standalone/drakbackup:3833 #, c-format msgid "Directory To Restore From" msgstr "" #: standalone/drakbackup:3869 #, c-format msgid "Restore Progress" msgstr "" #: standalone/drakbackup:3980 #, fuzzy, c-format msgid "Build Backup" msgstr "Чорны" #: standalone/drakbackup:4013 standalone/drakbackup:4333 #, c-format msgid "Restore" msgstr "Аднавіць" #: standalone/drakbackup:4101 #, fuzzy, c-format msgid "The following packages need to be installed:\n" msgstr "Наступныя пакеты будуць даданы да сістэмы" #: standalone/drakbackup:4128 #, fuzzy, c-format msgid "Please select data to restore..." msgstr "Пазначце ня менш адной групы для карыстальніка" #: standalone/drakbackup:4168 #, fuzzy, c-format msgid "Backup system files" msgstr "Дрэнны файл рэзервовай копіі" #: standalone/drakbackup:4171 #, fuzzy, c-format msgid "Backup user files" msgstr "Дрэнны файл рэзервовай копіі" #: standalone/drakbackup:4174 #, fuzzy, c-format msgid "Backup other files" msgstr "Дрэнны файл рэзервовай копіі" #: standalone/drakbackup:4177 standalone/drakbackup:4211 #, c-format msgid "Total Progress" msgstr "" #: standalone/drakbackup:4203 #, c-format msgid "Sending files by FTP" msgstr "" #: standalone/drakbackup:4206 #, fuzzy, c-format msgid "Sending files..." msgstr "Вызначэнне прыладаў..." #: standalone/drakbackup:4276 #, fuzzy, c-format msgid "Backup Now from configuration file" msgstr "Завершана аднаўленьне канфігурацыі меню" #: standalone/drakbackup:4281 #, fuzzy, c-format msgid "View Backup Configuration." msgstr "Канфігурацыя сеткі" #: standalone/drakbackup:4307 #, fuzzy, c-format msgid "Wizard Configuration" msgstr "Канфігурацыя" #: standalone/drakbackup:4312 #, fuzzy, c-format msgid "Advanced Configuration" msgstr "Канфігурацыя" #: standalone/drakbackup:4317 #, fuzzy, c-format msgid "View Configuration" msgstr "Канфігурацыя" #: standalone/drakbackup:4321 #, fuzzy, c-format msgid "View Last Log" msgstr "Відэа" #: standalone/drakbackup:4326 #, fuzzy, c-format msgid "Backup Now" msgstr "Чорны" #: standalone/drakbackup:4330 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" #: standalone/drakbackup:4350 standalone/drakbackup:4353 #, fuzzy, c-format msgid "Drakbackup" msgstr "Чорны" #: standalone/drakboot:64 #, c-format msgid "Graphical boot theme selection" msgstr "" #: standalone/drakboot:64 #, fuzzy, c-format msgid "System mode" msgstr "Сыстэмнае меню" #: standalone/drakboot:74 standalone/drakfloppy:47 standalone/harddrake2:187 #: standalone/harddrake2:188 standalone/logdrake:70 #: standalone/printerdrake:138 standalone/printerdrake:139 #: standalone/printerdrake:140 #, c-format msgid "/_File" msgstr "/_Файл" #: standalone/drakboot:75 standalone/drakfloppy:48 standalone/logdrake:76 #, c-format msgid "/File/_Quit" msgstr "/Файл/_Выйсьці" #: standalone/drakboot:75 standalone/drakfloppy:48 standalone/harddrake2:188 #: standalone/logdrake:76 standalone/printerdrake:140 #, c-format msgid "Q" msgstr "Q" #: standalone/drakboot:148 #, fuzzy, c-format msgid "Install themes" msgstr "Усталяванне сістэмы" #: standalone/drakboot:149 #, fuzzy, c-format msgid "Create new theme" msgstr "Стварыць новага карыстальніка" #: standalone/drakboot:161 #, c-format msgid "Use graphical boot" msgstr "" #: standalone/drakboot:166 #, c-format msgid "" "Your system bootloader is not in framebuffer mode. To activate graphical " "boot, select a graphic video mode from the bootloader configuration tool." msgstr "" #: standalone/drakboot:167 #, fuzzy, c-format msgid "Do you want to configure it now?" msgstr "Ці жадаеце пратэсціраваць настройкі?" #: standalone/drakboot:177 #, c-format msgid "Theme" msgstr "Тэма" #: standalone/drakboot:180 #, c-format msgid "" "Display theme\n" "under console" msgstr "" #: standalone/drakboot:189 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "" #: standalone/drakboot:197 #, c-format msgid "No, I do not want autologin" msgstr "" #: standalone/drakboot:198 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "" #: standalone/drakboot:201 #, fuzzy, c-format msgid "Default user" msgstr "Па ўмаўчанні (%s)" #: standalone/drakboot:202 #, fuzzy, c-format msgid "Default desktop" msgstr "Скура Па ўмаўчанні" #: standalone/drakboot:310 #, c-format msgid "" "Please choose a video mode, it will be applied to each of the boot entries " "selected below.\n" "Be sure your video card supports the mode you choose." msgstr "" #: standalone/drakbug:41 #, fuzzy, c-format msgid "Mandrakelinux Bug Report Tool" msgstr "Дастасаваньне для кіраваньня карыстальнікамі Mandrakelinux" #: standalone/drakbug:46 #, fuzzy, c-format msgid "Mandrakelinux Control Center" msgstr "Цэнтар кіраваньня" #: standalone/drakbug:48 #, fuzzy, c-format msgid "Synchronization tool" msgstr "Канфігурацыя сістэмных сэрвісаў" #: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:148 #: standalone/drakbug:150 standalone/drakbug:154 #, fuzzy, c-format msgid "Standalone Tools" msgstr "Кансольныя інструментальныя сродкі" #: standalone/drakbug:50 #, c-format msgid "HardDrake" msgstr "" #: standalone/drakbug:51 #, c-format msgid "Mandrakeonline" msgstr "" #: standalone/drakbug:52 #, fuzzy, c-format msgid "Menudrake" msgstr "Рэдактар мэню" #: standalone/drakbug:53 #, fuzzy, c-format msgid "Msec" msgstr "Мыш" #: standalone/drakbug:54 #, fuzzy, c-format msgid "Remote Control" msgstr "Кантролер гучнасьці" #: standalone/drakbug:55 #, fuzzy, c-format msgid "Software Manager" msgstr "Мэнэджэр сэрвісаў" #: standalone/drakbug:56 #, c-format msgid "Urpmi" msgstr "" #: standalone/drakbug:57 #, fuzzy, c-format msgid "Windows Migration tool" msgstr "Уласьцівасьці акна" #: standalone/drakbug:58 #, c-format msgid "Userdrake" msgstr "" #: standalone/drakbug:59 #, fuzzy, c-format msgid "Configuration Wizards" msgstr "Канфігурацыя" #: standalone/drakbug:81 #, c-format msgid "Select Mandrakesoft Tool:" msgstr "" #: standalone/drakbug:82 #, c-format msgid "" "or Application Name\n" "(or Full Path):" msgstr "" #: standalone/drakbug:85 #, fuzzy, c-format msgid "Find Package" msgstr "Пэйджэр" #: standalone/drakbug:87 #, fuzzy, c-format msgid "Package: " msgstr "Пэйджэр" #: standalone/drakbug:88 #, fuzzy, c-format msgid "Kernel:" msgstr "Імя" #: standalone/drakbug:100 #, c-format msgid "" "To submit a bug report, click on the report button. \n" "This will open a web browser window on %s where you'll find a form to fill " "in. The information displayed above will be transferred to that server. \n" "Things useful to include in your report are the output of lspci, kernel " "version, and /proc/cpuinfo." msgstr "" #: standalone/drakbug:106 #, fuzzy, c-format msgid "Report" msgstr "Цыклічна" #: standalone/drakbug:163 #, fuzzy, c-format msgid "Not installed" msgstr "Заканчэнне ўсталявання" #: standalone/drakbug:175 #, fuzzy, c-format msgid "Package not installed" msgstr "Выбар пакетаў" #: standalone/drakclock:29 #, fuzzy, c-format msgid "DrakClock" msgstr "Рок" #: standalone/drakclock:39 #, fuzzy, c-format msgid "not defined" msgstr "Настроіць панэль" #: standalone/drakclock:41 #, c-format msgid "Change Time Zone" msgstr "" #: standalone/drakclock:45 #, c-format msgid "Timezone - DrakClock" msgstr "" #: standalone/drakclock:47 #, c-format msgid "GMT - DrakClock" msgstr "" #: standalone/drakclock:47 #, c-format msgid "Is your hardware clock set to GMT?" msgstr "Ваш сістэмны гадзіннік усталяваны на GMT?" #: standalone/drakclock:75 #, fuzzy, c-format msgid "Network Time Protocol" msgstr "Сеткавы інтэрфейс" #: standalone/drakclock:77 #, c-format msgid "" "Your computer can synchronize its clock\n" " with a remote time server using NTP" msgstr "" #: standalone/drakclock:78 #, c-format msgid "Enable Network Time Protocol" msgstr "" #: standalone/drakclock:86 #, c-format msgid "Server:" msgstr "Сэрвэр:" #: standalone/drakclock:124 #, c-format msgid "Could not synchronize with %s." msgstr "" #: standalone/drakclock:146 standalone/drakclock:156 #, c-format msgid "Reset" msgstr "Скінуць" #: standalone/drakclock:224 #, c-format msgid "" "We need to install ntp package\n" " to enable Network Time Protocol\n" "\n" "Do you want to install ntp?" msgstr "" #: standalone/drakconnect:85 #, fuzzy, c-format msgid "Network configuration (%d adapters)" msgstr "Канфігурацыя сеткі" #: standalone/drakconnect:96 standalone/drakconnect:786 #, c-format msgid "Gateway:" msgstr "Шлюз:" #: standalone/drakconnect:96 standalone/drakconnect:786 #, c-format msgid "Interface:" msgstr "Інтэрфэйс:" #: standalone/drakconnect:100 standalone/net_monitor:122 #, c-format msgid "Wait please" msgstr "" #: standalone/drakconnect:116 #, c-format msgid "Interface" msgstr "Інтэрфэйс" #: standalone/drakconnect:116 standalone/printerdrake:211 #: standalone/printerdrake:218 #, c-format msgid "State" msgstr "Стан" #: standalone/drakconnect:133 #, c-format msgid "Hostname: " msgstr "Імя машыны: " #: standalone/drakconnect:135 #, fuzzy, c-format msgid "Configure hostname..." msgstr "Настройка IDE" #: standalone/drakconnect:149 standalone/drakconnect:842 #, fuzzy, c-format msgid "LAN configuration" msgstr "Настройка ISDN" #: standalone/drakconnect:154 #, fuzzy, c-format msgid "Configure Local Area Network..." msgstr "Настройка сеткі" #: standalone/drakconnect:162 standalone/drakconnect:246 #: standalone/drakconnect:250 #, c-format msgid "Apply" msgstr "Применить" #: standalone/drakconnect:197 #, c-format msgid "Manage connections" msgstr "" #: standalone/drakconnect:224 #, fuzzy, c-format msgid "Device selected" msgstr "/Выдаліць/Выбранае" #: standalone/drakconnect:305 #, fuzzy, c-format msgid "IP configuration" msgstr "Канфігурацыя" #: standalone/drakconnect:344 #, fuzzy, c-format msgid "DNS servers" msgstr "CDDB сервакі" #: standalone/drakconnect:352 #, fuzzy, c-format msgid "Search Domain" msgstr "NIS Domain" #: standalone/drakconnect:360 #, fuzzy, c-format msgid "static" msgstr "Антарктыка" #: standalone/drakconnect:360 #, c-format msgid "DHCP" msgstr "" #: standalone/drakconnect:470 #, fuzzy, c-format msgid "Metric" msgstr "абмежаванне" #: standalone/drakconnect:493 #, fuzzy, c-format msgid "Flow control" msgstr "Кантроль гуку" #: standalone/drakconnect:494 #, fuzzy, c-format msgid "Line termination" msgstr "Памеры і арыентацыя" #: standalone/drakconnect:505 #, c-format msgid "Modem timeout" msgstr "" #: standalone/drakconnect:509 #, fuzzy, c-format msgid "Use lock file" msgstr "Абярыце файл" #: standalone/drakconnect:511 #, c-format msgid "Wait for dialup tone before dialing" msgstr "" #: standalone/drakconnect:514 #, fuzzy, c-format msgid "Busy wait" msgstr "Калі ласка, пачакайце" #: standalone/drakconnect:519 #, fuzzy, c-format msgid "Modem sound" msgstr "Запісаць гукавы кліп" #: standalone/drakconnect:520 #, c-format msgid "Enable" msgstr "Уключыць" #: standalone/drakconnect:520 #, c-format msgid "Disable" msgstr "Выключыць" #: standalone/drakconnect:571 standalone/harddrake2:48 #, c-format msgid "Media class" msgstr "" #: standalone/drakconnect:572 standalone/drakfloppy:136 #, fuzzy, c-format msgid "Module name" msgstr "Назва файла" #: standalone/drakconnect:573 #, fuzzy, c-format msgid "Mac Address" msgstr "Адрасная кніга" #: standalone/drakconnect:574 standalone/harddrake2:26 #: standalone/harddrake2:118 #, c-format msgid "Bus" msgstr "Прац." #: standalone/drakconnect:575 standalone/harddrake2:32 #, c-format msgid "Location on the bus" msgstr "" #: standalone/drakconnect:671 standalone/drakgw:247 standalone/drakpxe:138 #, c-format msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "Ні водны ethernet сеткавы адаптар у вашай сістэме не вызначаны. Калі ласка, " "скарыстайце канфігурацыйны інструмэнт." #: standalone/drakconnect:679 #, fuzzy, c-format msgid "Remove a network interface" msgstr "Пазначце сеткавы інтэрфейс" #: standalone/drakconnect:683 #, fuzzy, c-format msgid "Select the network interface to remove:" msgstr "Пазначце сеткавы інтэрфейс" #: standalone/drakconnect:715 #, c-format msgid "" "An error occurred while deleting the \"%s\" network interface:\n" "\n" "%s" msgstr "" #: standalone/drakconnect:716 #, c-format msgid "" "Congratulations, the \"%s\" network interface has been successfully deleted" msgstr "" #: standalone/drakconnect:732 #, c-format msgid "No IP" msgstr "" #: standalone/drakconnect:733 #, c-format msgid "No Mask" msgstr "" #: standalone/drakconnect:734 standalone/drakconnect:913 #, fuzzy, c-format msgid "up" msgstr "Скокнуць" #: standalone/drakconnect:734 standalone/drakconnect:913 #, c-format msgid "down" msgstr "" #: standalone/drakconnect:776 standalone/net_monitor:470 #, c-format msgid "Connected" msgstr "Далучаны" #: standalone/drakconnect:776 standalone/net_monitor:470 #, c-format msgid "Not connected" msgstr "Адлучаны" #: standalone/drakconnect:778 #, c-format msgid "Disconnect..." msgstr "" #: standalone/drakconnect:778 #, fuzzy, c-format msgid "Connect..." msgstr "Настройка IDE" #: standalone/drakconnect:807 #, c-format msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "" #: standalone/drakconnect:838 #, c-format msgid "Deactivate now" msgstr "" #: standalone/drakconnect:838 #, c-format msgid "Activate now" msgstr "" #: standalone/drakconnect:846 #, c-format msgid "" "You do not have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" #: standalone/drakconnect:860 #, fuzzy, c-format msgid "LAN Configuration" msgstr "Канфігурацыя" #: standalone/drakconnect:872 #, c-format msgid "Adapter %s: %s" msgstr "" #: standalone/drakconnect:881 #, fuzzy, c-format msgid "Boot Protocol" msgstr "Пратакол" #: standalone/drakconnect:882 #, c-format msgid "Started on boot" msgstr "" #: standalone/drakconnect:918 #, c-format msgid "" "This interface has not been configured yet.\n" "Run the \"Add an interface\" assistant from the Mandrakelinux Control Center" msgstr "" #. -PO: here "Add Connection" should be translated the same was as in control-center #: standalone/drakconnect:973 standalone/net_applet:50 #, c-format msgid "" "You do not have any configured Internet connection.\n" "Run the \"%s\" assistant from the Mandrakelinux Control Center" msgstr "" #: standalone/drakconnect:974 standalone/net_applet:51 #, fuzzy, c-format msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)" msgstr "Пазначце сеткавы інтэрфейс" #: standalone/drakconnect:981 #, fuzzy, c-format msgid "Internet connection configuration" msgstr "Настройка далучэння да Інтэрнэту" #: standalone/drakconnect:999 #, c-format msgid "Third DNS server (optional)" msgstr "" #: standalone/drakconnect:1021 #, fuzzy, c-format msgid "Internet Connection Configuration" msgstr "Настройка далучэння да Інтэрнэту" #: standalone/drakconnect:1022 #, c-format msgid "Internet access" msgstr "" #: standalone/drakconnect:1024 standalone/net_monitor:101 #, fuzzy, c-format msgid "Connection type: " msgstr "Імя злучэння" #: standalone/drakconnect:1027 #, c-format msgid "Status:" msgstr "Стан:" #: standalone/drakedm:34 #, c-format msgid "GDM (GNOME Display Manager)" msgstr "" #: standalone/drakedm:35 #, c-format msgid "KDM (KDE Display Manager)" msgstr "" #: standalone/drakedm:36 #, c-format msgid "MdkKDM (Mandrakelinux Display Manager)" msgstr "" #: standalone/drakedm:37 #, fuzzy, c-format msgid "XDM (X Display Manager)" msgstr "Мэнэджэр файлаў" #: standalone/drakedm:55 #, fuzzy, c-format msgid "Choosing a display manager" msgstr "Мэнэджэр файлаў" #: standalone/drakedm:56 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" #: standalone/drakedm:79 #, fuzzy, c-format msgid "The change is done, do you want to restart the dm service?" msgstr "Куды вы жадаеце манціраваць прыладу %s?" #: standalone/drakedm:80 #, c-format msgid "" "You are going to close all running programs and lose your current session. " "Are you really sure that you want to restart the dm service?" msgstr "" #: standalone/drakfloppy:41 #, fuzzy, c-format msgid "drakfloppy" msgstr "Захаванне на дыскету" #: standalone/drakfloppy:78 #, fuzzy, c-format msgid "Boot disk creation" msgstr "Настройка IDE" #: standalone/drakfloppy:79 #, c-format msgid "General" msgstr "Агульныя" #: standalone/drakfloppy:82 standalone/harddrake2:145 #, c-format msgid "Device" msgstr "Прылада" #: standalone/drakfloppy:88 #, fuzzy, c-format msgid "Kernel version" msgstr "Канфігурацыя" #: standalone/drakfloppy:103 #, c-format msgid "Preferences" msgstr "Усталяваньні" #: standalone/drakfloppy:117 #, fuzzy, c-format msgid "Advanced preferences" msgstr "Адмысловыя ўсталяваньні" #: standalone/drakfloppy:136 #, c-format msgid "Size" msgstr "Памер" #: standalone/drakfloppy:139 #, c-format msgid "Mkinitrd optional arguments" msgstr "" #: standalone/drakfloppy:141 #, fuzzy, c-format msgid "force" msgstr "Усталяваньні" #: standalone/drakfloppy:142 #, c-format msgid "omit raid modules" msgstr "" #: standalone/drakfloppy:143 #, c-format msgid "if needed" msgstr "" #: standalone/drakfloppy:144 #, c-format msgid "omit scsi modules" msgstr "" #: standalone/drakfloppy:147 #, fuzzy, c-format msgid "Add a module" msgstr "Дадаць карыстальніка" #: standalone/drakfloppy:156 #, fuzzy, c-format msgid "Remove a module" msgstr "/Выдаліць дохлыя файлы" #: standalone/drakfloppy:291 #, c-format msgid "Be sure a media is present for the device %s" msgstr "" #: standalone/drakfloppy:297 #, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" #: standalone/drakfloppy:300 #, fuzzy, c-format msgid "Unable to fork: %s" msgstr "Немагчыма адчыніць файл %s\n" #: standalone/drakfloppy:303 #, c-format msgid "Floppy creation completed" msgstr "" #: standalone/drakfloppy:303 #, c-format msgid "The creation of the boot floppy has been successfully completed \n" msgstr "" #. -PO: Do not alter the and tags #: standalone/drakfloppy:308 #, c-format msgid "" "Unable to properly close mkbootdisk:\n" "\n" "%s" msgstr "" #: standalone/drakfont:182 #, c-format msgid "Search installed fonts" msgstr "" #: standalone/drakfont:184 #, c-format msgid "Unselect fonts installed" msgstr "" #: standalone/drakfont:207 #, fuzzy, c-format msgid "parse all fonts" msgstr "Выкарыстовываць шрыфт X" #: standalone/drakfont:209 #, c-format msgid "No fonts found" msgstr "" #: standalone/drakfont:217 standalone/drakfont:257 standalone/drakfont:324 #: standalone/drakfont:357 standalone/drakfont:365 standalone/drakfont:391 #: standalone/drakfont:409 standalone/drakfont:423 #, fuzzy, c-format msgid "done" msgstr "Зроблена" #: standalone/drakfont:222 #, c-format msgid "Could not find any font in your mounted partitions" msgstr "" #: standalone/drakfont:255 #, c-format msgid "Reselect correct fonts" msgstr "" #: standalone/drakfont:258 #, fuzzy, c-format msgid "Could not find any font.\n" msgstr "Не знойздены праграмы\n" #: standalone/drakfont:268 #, fuzzy, c-format msgid "Search for fonts in installed list" msgstr "Адшукаць файлы на дыску" #: standalone/drakfont:293 #, c-format msgid "%s fonts conversion" msgstr "" #: standalone/drakfont:322 #, fuzzy, c-format msgid "Fonts copy" msgstr "Шрыфты" #: standalone/drakfont:325 #, fuzzy, c-format msgid "True Type fonts installation" msgstr "Падрыхтоўка ўсталяваньня" #: standalone/drakfont:332 #, c-format msgid "please wait during ttmkfdir..." msgstr "" #: standalone/drakfont:333 #, c-format msgid "True Type install done" msgstr "" #: standalone/drakfont:339 standalone/drakfont:354 #, c-format msgid "type1inst building" msgstr "" #: standalone/drakfont:348 #, c-format msgid "Ghostscript referencing" msgstr "" #: standalone/drakfont:358 #, c-format msgid "Suppress Temporary Files" msgstr "" #: standalone/drakfont:361 #, fuzzy, c-format msgid "Restart XFS" msgstr "Рэстарт" #: standalone/drakfont:407 standalone/drakfont:417 #, c-format msgid "Suppress Fonts Files" msgstr "" #: standalone/drakfont:419 #, fuzzy, c-format msgid "xfs restart" msgstr "Рэстарт" #: standalone/drakfont:427 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" #: standalone/drakfont:476 standalone/drakfont:485 #, fuzzy, c-format msgid "DrakFont" msgstr "Шрыфт" #: standalone/drakfont:486 #, c-format msgid "Font List" msgstr "Сьпіс шрыфтоў" #: standalone/drakfont:492 #, c-format msgid "About" msgstr "Даведка" #: standalone/drakfont:494 standalone/drakfont:692 standalone/drakfont:730 #, fuzzy, c-format msgid "Uninstall" msgstr "Усталёўка" #: standalone/drakfont:495 #, c-format msgid "Import" msgstr "Імпарт" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/drakfont:513 #, c-format msgid "" "Copyright (C) 2001-2002 by Mandrakesoft \n" "\n" "\n" " DUPONT Sebastien (original version)\n" "\n" " CHAUMETTE Damien \n" "\n" " VIGNAUD Thierry " msgstr "" #: standalone/drakfont:522 #, fuzzy, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA." msgstr "" "Пашырэнне ESounD\n" "\n" " Гэта прога - бясплатнае праграмнае забяспячэнне; вы можыце распаўсюджываць " "і/альбо мадыфікаваць яго\n" "у адпаведнасці з ліцэнзыяй GNU, якая была надрукавана\n" "Арганізацыяй бясплатнага праграмнага забеспячэння, вы можыце карыстацца " "версыяй 2 ліцэнзыі альбо\n" "(па вашаму жаданню) ці якой іншай пазнейшай версыяй.\n" "\n" "Гэта прога распаўсюджываецца з надзеяй, што камусці яна будзе карысна,\n" "але БЯЗЬ УСЯЛЯКІХ ГАРАНТЫЙ нават гарантый якія маюцца на ўвазе пры\n" "ПРАЦАЗДОЛЬНАСЦІ альбо ПРЫГОДНАСЦІ ДА ЯКОЙСЦІ МЭТЫ. Калі ласка,\n" "за падрабязнасцямі глянце на GNU ліцэнзыю.\n" "\n" "А копію ліцэнзыі вы павінны былі атрымаць\n" "разам зь гэтай прогай; калі не, дык напішыце пра гэта па адрасу (дашлем)\n" "Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA " "02111-1307,\n" "USA." #: standalone/drakfont:538 #, c-format msgid "" "Thanks:\n" "\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" "\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" "\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" msgstr "" #: standalone/drakfont:557 #, fuzzy, c-format msgid "Choose the applications that will support the fonts:" msgstr "Выбар раздзелаў для фарматавання" #: standalone/drakfont:558 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" #: standalone/drakfont:568 #, c-format msgid "Ghostscript" msgstr "Ghostscript" #: standalone/drakfont:569 #, fuzzy, c-format msgid "StarOffice" msgstr "Офіс" #: standalone/drakfont:570 #, fuzzy, c-format msgid "Abiword" msgstr "Клявіятура" #: standalone/drakfont:571 #, fuzzy, c-format msgid "Generic Printers" msgstr "Прынтэры" #: standalone/drakfont:587 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "" #: standalone/drakfont:588 #, c-format msgid "File Selection" msgstr "Выбар файла" #: standalone/drakfont:604 #, c-format msgid "You've not selected any font" msgstr "" #: standalone/drakfont:657 #, fuzzy, c-format msgid "Import fonts" msgstr "важна" #: standalone/drakfont:662 #, fuzzy, c-format msgid "Install fonts" msgstr "Усталёўка" #: standalone/drakfont:697 #, c-format msgid "click here if you are sure." msgstr "" #: standalone/drakfont:699 #, c-format msgid "here if no." msgstr "" #: standalone/drakfont:738 #, fuzzy, c-format msgid "Unselected All" msgstr "Дадаць выбраныя файлы" #: standalone/drakfont:741 #, fuzzy, c-format msgid "Selected All" msgstr "Абярыце файл" #: standalone/drakfont:744 #, c-format msgid "Remove List" msgstr "Выдаліць сьпіс" #: standalone/drakfont:755 standalone/drakfont:774 #, c-format msgid "Importing fonts" msgstr "" #: standalone/drakfont:759 standalone/drakfont:779 #, fuzzy, c-format msgid "Initial tests" msgstr "Віртуальныя працоўныя сталы" #: standalone/drakfont:760 #, fuzzy, c-format msgid "Copy fonts on your system" msgstr "У вашай сістэме няма ніводнага сеткавага адаптара!" #: standalone/drakfont:761 #, c-format msgid "Install & convert Fonts" msgstr "" #: standalone/drakfont:762 #, fuzzy, c-format msgid "Post Install" msgstr "Усталёўка" #: standalone/drakfont:780 #, fuzzy, c-format msgid "Remove fonts on your system" msgstr "У вашай сістэме няма ніводнага сеткавага адаптара!" #: standalone/drakfont:781 #, fuzzy, c-format msgid "Post Uninstall" msgstr "Заканчэнне ўсталявання" #: standalone/drakgw:58 standalone/drakgw:191 #, c-format msgid "Internet Connection Sharing" msgstr "Сумеснае Інтэрнэт-злучэнне" #: standalone/drakgw:111 standalone/drakvpn:51 #, c-format msgid "Sorry, we support only 2.4 and above kernels." msgstr "" #: standalone/drakgw:122 #, c-format msgid "Internet Connection Sharing currently disabled" msgstr "Сумеснае Інтэрнэт-злучэнне зараз забаронена" #: standalone/drakgw:123 #, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" #: standalone/drakgw:127 standalone/drakvpn:127 #, fuzzy, c-format msgid "enable" msgstr "(дазволіць)" #: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101 #: standalone/drakvpn:127 #, fuzzy, c-format msgid "reconfigure" msgstr "Настроіць панэль" #: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101 #: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735 #, c-format msgid "dismiss" msgstr "" #: standalone/drakgw:134 #, c-format msgid "Enabling servers..." msgstr "" #: standalone/drakgw:146 #, fuzzy, c-format msgid "Internet Connection Sharing is now enabled." msgstr "Сумеснае Інтэрнэт-злучэнне зараз магчыма" #: standalone/drakgw:149 #, c-format msgid "Internet Connection Sharing currently enabled" msgstr "Сумеснае Інтэрнэт-злучэнне зараз магчыма" #: standalone/drakgw:150 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" #: standalone/drakgw:154 standalone/drakvpn:101 #, fuzzy, c-format msgid "disable" msgstr "(адмовіць)" #: standalone/drakgw:157 #, fuzzy, c-format msgid "Disabling servers..." msgstr "Вызначэнне прыладаў..." #: standalone/drakgw:172 #, fuzzy, c-format msgid "Internet Connection Sharing is now disabled." msgstr "Сумеснае Інтэрнэт-злучэнне зараз забаронена" #: standalone/drakgw:192 #, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" #: standalone/drakgw:236 #, c-format msgid "Interface %s (using module %s)" msgstr "" #: standalone/drakgw:237 #, fuzzy, c-format msgid "Interface %s" msgstr "Сеткавыя інтэрфэйсы" #: standalone/drakgw:246 standalone/drakpxe:137 #, c-format msgid "No network adapter on your system!" msgstr "У вашай сістэме няма ніводнага сеткавага адаптара!" #: standalone/drakgw:253 #, c-format msgid "Network interface" msgstr "Сеткавы інтэрфейс" #: standalone/drakgw:254 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" #: standalone/drakgw:260 standalone/drakpxe:142 #, c-format msgid "Choose the network interface" msgstr "Пазначце сеткавы інтэрфейс" #: standalone/drakgw:261 #, c-format msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "" "Калі ласка, абярыце сеткавы адаптар, які будзе выкарыстаны для далучэння да " "вашай лакальнай сеткі." #: standalone/drakgw:290 #, fuzzy, c-format msgid "Network interface already configured" msgstr "Інфармацыя аб сеткавых інтэрфэйсах" #: standalone/drakgw:291 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" #: standalone/drakgw:296 #, fuzzy, c-format msgid "Automatic reconfiguration" msgstr "Аўтаматычнае вызначэнне" #: standalone/drakgw:296 #, c-format msgid "No (experts only)" msgstr "" #: standalone/drakgw:297 #, fuzzy, c-format msgid "Show current interface configuration" msgstr "Настройка драйверу Sun" #: standalone/drakgw:298 #, fuzzy, c-format msgid "Current interface configuration" msgstr "Настройка драйверу Sun" #: standalone/drakgw:299 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" #: standalone/drakgw:312 #, c-format msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\t\t \n" "Otherwise, I can reconfigure your interface and (re)configure a DHCP server " "for you.\n" "\n" msgstr "" #: standalone/drakgw:319 #, fuzzy, c-format msgid "Local Network adress" msgstr "Прагляд лякальнай сеткі" #: standalone/drakgw:323 #, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you do not know the meaning of an option, simply leave it as it is." msgstr "" #: standalone/drakgw:327 #, c-format msgid "(This) DHCP Server IP" msgstr "" #: standalone/drakgw:328 #, fuzzy, c-format msgid "The DNS Server IP" msgstr "IP сэервера SMB" #: standalone/drakgw:329 #, c-format msgid "The internal domain name" msgstr "" #: standalone/drakgw:330 #, c-format msgid "The DHCP start range" msgstr "" #: standalone/drakgw:331 #, c-format msgid "The DHCP end range" msgstr "" #: standalone/drakgw:332 #, c-format msgid "The default lease (in seconds)" msgstr "" #: standalone/drakgw:333 #, c-format msgid "The maximum lease (in seconds)" msgstr "" #: standalone/drakgw:334 #, fuzzy, c-format msgid "Re-configure interface and DHCP server" msgstr "Настройка IDE" #: standalone/drakgw:341 #, c-format msgid "The Local Network did not finish with `.0', bailing out." msgstr "" #: standalone/drakgw:351 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "Патэнцыйны адрас ЛВС канфліктуе з бягучай канфігурацыяй %s!\n" #: standalone/drakgw:361 #, fuzzy, c-format msgid "Configuring..." msgstr "Настройка IDE" #: standalone/drakgw:362 #, c-format msgid "Configuring scripts, installing software, starting servers..." msgstr "Канфігурацыя сцэнараў, усталяванне ПЗ, запуск службаў..." #: standalone/drakgw:402 standalone/drakpxe:231 standalone/drakvpn:278 #, c-format msgid "Problems installing package %s" msgstr "Праблемы з усталяваннем пакету %s" #: standalone/drakgw:598 #, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP) and\n" " a Transparent Proxy Cache server (SQUID)." msgstr "" #: standalone/drakhelp:17 #, c-format msgid "" " drakhelp 0.1\n" "Copyright (C) 2003-2004 Mandrakesoft.\n" "This is free software and may be redistributed under the terms of the GNU " "GPL.\n" "\n" "Usage: \n" msgstr "" #: standalone/drakhelp:22 #, c-format msgid " --help - display this help \n" msgstr "" #: standalone/drakhelp:23 #, c-format msgid "" " --id - load the html help page which refers to id_label\n" msgstr "" #: standalone/drakhelp:24 #, c-format msgid "" " --doc - link to another web page ( for WM welcome " "frontend)\n" msgstr "" #: standalone/drakhelp:36 #, fuzzy, c-format msgid "Mandrakelinux Help Center" msgstr "Цэнтар кіраваньня" #: standalone/drakhelp:36 #, c-format msgid "" "%s cannot be displayed \n" ". No Help entry of this type\n" msgstr "" #: standalone/drakperm:22 #, c-format msgid "System settings" msgstr "сыстэмныя ўсталёўкі" #: standalone/drakperm:23 #, fuzzy, c-format msgid "Custom settings" msgstr "Настройкі мышы" #: standalone/drakperm:24 #, fuzzy, c-format msgid "Custom & system settings" msgstr "Выкарыстоўваць існуючы раздзел" #: standalone/drakperm:44 #, c-format msgid "Editable" msgstr "Можа рэдагавацца" #: standalone/drakperm:49 standalone/drakperm:321 #, c-format msgid "Path" msgstr "Шлях:" #: standalone/drakperm:49 standalone/drakperm:250 #, c-format msgid "User" msgstr "Карыстальнік" #: standalone/drakperm:49 standalone/drakperm:250 #, c-format msgid "Group" msgstr "Група" #: standalone/drakperm:49 standalone/drakperm:333 #, c-format msgid "Permissions" msgstr "Правы доступу" #: standalone/drakperm:107 #, c-format msgid "" "Here you can see files to use in order to fix permissions, owners, and " "groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" #: standalone/drakperm:110 #, c-format msgid "" "The current security level is %s.\n" "Select permissions to see/edit" msgstr "" #: standalone/drakperm:121 #, c-format msgid "Up" msgstr "Угору" #: standalone/drakperm:121 #, c-format msgid "Move selected rule up one level" msgstr "" #: standalone/drakperm:122 #, c-format msgid "Down" msgstr "Уніз" #: standalone/drakperm:122 #, c-format msgid "Move selected rule down one level" msgstr "" #: standalone/drakperm:123 #, fuzzy, c-format msgid "Add a rule" msgstr "Дадаць карыстальніка" #: standalone/drakperm:123 #, fuzzy, c-format msgid "Add a new rule at the end" msgstr "Дадаць карыстальніка ў сыстэму" #: standalone/drakperm:124 #, fuzzy, c-format msgid "Delete selected rule" msgstr "Выдаліць вылучаны радок" #. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/drakperm:125 standalone/drakups:298 standalone/drakups:358 #: standalone/drakups:378 standalone/drakvpn:333 standalone/drakvpn:694 #: standalone/printerdrake:232 #, c-format msgid "Edit" msgstr "Рэдагаваць" #: standalone/drakperm:125 #, c-format msgid "Edit current rule" msgstr "" #: standalone/drakperm:242 #, fuzzy, c-format msgid "browse" msgstr "Прагляд" #: standalone/drakperm:247 #, c-format msgid "user" msgstr "карыстальнік" #: standalone/drakperm:247 #, c-format msgid "group" msgstr "група" #: standalone/drakperm:247 #, c-format msgid "other" msgstr "іншы" #: standalone/drakperm:252 #, c-format msgid "Read" msgstr "Чытаньне" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:255 #, fuzzy, c-format msgid "Enable \"%s\" to read the file" msgstr "" "%s\n" "Немагчыма запісаць у файл: %s" #: standalone/drakperm:259 #, c-format msgid "Write" msgstr "Запіс" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:262 #, fuzzy, c-format msgid "Enable \"%s\" to write the file" msgstr "" "%s\n" "Немагчыма запісаць у файл: %s" #: standalone/drakperm:266 #, c-format msgid "Execute" msgstr "Выканаць" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:269 #, c-format msgid "Enable \"%s\" to execute the file" msgstr "" #: standalone/drakperm:272 #, c-format msgid "Sticky-bit" msgstr "" #: standalone/drakperm:272 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" #: standalone/drakperm:273 #, c-format msgid "Set-UID" msgstr "" #: standalone/drakperm:273 #, c-format msgid "Use owner id for execution" msgstr "" #: standalone/drakperm:274 #, c-format msgid "Set-GID" msgstr "" #: standalone/drakperm:274 #, c-format msgid "Use group id for execution" msgstr "" #: standalone/drakperm:290 standalone/drakxtv:89 #, c-format msgid "User:" msgstr "Карыстальнік(ца):" #: standalone/drakperm:292 #, c-format msgid "Group:" msgstr "Група:" #: standalone/drakperm:296 #, fuzzy, c-format msgid "Current user" msgstr "Прыняць карыстальніка" #: standalone/drakperm:297 #, c-format msgid "When checked, owner and group will not be changed" msgstr "" #: standalone/drakperm:307 #, fuzzy, c-format msgid "Path selection" msgstr "Дзеяньні" #: standalone/drakperm:327 #, c-format msgid "Property" msgstr "Якасьць" #: standalone/drakpxe:55 #, fuzzy, c-format msgid "PXE Server Configuration" msgstr "Канфігурацыя сістэмных сэрвісаў" #: standalone/drakpxe:111 #, fuzzy, c-format msgid "Installation Server Configuration" msgstr "Канфігурацыя сістэмных сэрвісаў" #: standalone/drakpxe:112 #, c-format msgid "" "You are about to configure your computer to install a PXE server as a DHCP " "server\n" "and a TFTP server to build an installation server.\n" "With that feature, other computers on your local network will be installable " "using this computer as source.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" #: standalone/drakpxe:143 #, fuzzy, c-format msgid "Please choose which network interface will be used for the dhcp server." msgstr "" "Калі ласка, пазначце сеткавы адаптар, які плануеце выкарыстоўваць для " "далучэння да інтэрнэт" #: standalone/drakpxe:144 #, c-format msgid "Interface %s (on network %s)" msgstr "" #: standalone/drakpxe:169 #, c-format msgid "" "The DHCP server will allow other computer to boot using PXE in the given " "range of address.\n" "\n" "The network address is %s using a netmask of %s.\n" "\n" msgstr "" #: standalone/drakpxe:173 #, c-format msgid "The DHCP start ip" msgstr "" #: standalone/drakpxe:174 #, c-format msgid "The DHCP end ip" msgstr "" #: standalone/drakpxe:187 #, c-format msgid "" "Please indicate where the installation image will be available.\n" "\n" "If you do not have an existing directory, please copy the CD or DVD " "contents.\n" "\n" msgstr "" #: standalone/drakpxe:192 #, fuzzy, c-format msgid "Installation image directory" msgstr "Слоўнік GNOME" #: standalone/drakpxe:196 #, c-format msgid "No image found" msgstr "" #: standalone/drakpxe:197 #, c-format msgid "" "No CD or DVD image found, please copy the installation program and rpm files." msgstr "" #: standalone/drakpxe:210 #, c-format msgid "" "Please indicate where the auto_install.cfg file is located.\n" "\n" "Leave it blank if you do not want to set up automatic installation mode.\n" "\n" msgstr "" #: standalone/drakpxe:215 #, c-format msgid "Location of auto_install.cfg file" msgstr "" #: standalone/drakroam:167 #, c-format msgid "Status" msgstr "Статус" #: standalone/drakroam:174 #, c-format msgid "Disconnect" msgstr "" #: standalone/drakroam:179 #, c-format msgid "Roaming" msgstr "" #: standalone/drakroam:182 standalone/drakroam:256 #, c-format msgid "Roaming: %s" msgstr "" #: standalone/drakroam:189 #, c-format msgid "Scan interval (sec): " msgstr "" #: standalone/drakroam:192 #, c-format msgid "Set" msgstr "" #: standalone/drakroam:197 #, c-format msgid "Known Networks (Drag up/down or edit)" msgstr "" #: standalone/drakroam:205 #, c-format msgid "Connect" msgstr "" #: standalone/drakroam:213 #, c-format msgid "Available Networks" msgstr "" #: standalone/drakroam:224 #, c-format msgid "Rescan" msgstr "" #: standalone/drakroam:231 #, c-format msgid "Save and close" msgstr "" #: standalone/drakroam:281 #, c-format msgid "Network: %s" msgstr "Сетка: %s" #: standalone/drakroam:282 #, c-format msgid "Mode: %s" msgstr "Рэжым: %s" #: standalone/drakroam:283 #, c-format msgid "IP: %s" msgstr "" #: standalone/drakroam:284 #, c-format msgid "Encryption: %s" msgstr "Шыфраваньне: %s" #: standalone/drakroam:285 #, c-format msgid "Gateway: %s" msgstr "Шлюз: %s" #: standalone/drakroam:286 #, c-format msgid "Signal: %s" msgstr "" #: standalone/draksec:49 #, c-format msgid "ALL" msgstr "" #: standalone/draksec:50 #, c-format msgid "LOCAL" msgstr "" #: standalone/draksec:53 #, c-format msgid "Ignore" msgstr "Ігнараваць" #. -PO: Do not alter the and tags. #. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words. #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX. #: standalone/draksec:101 #, c-format msgid "" "Here, you can setup the security level and administrator of your machine.\n" "\n" "\n" "The 'Security Administrator' is the one who " "will receive security alerts if the\n" "'Security Alerts' option is set. It can be a " "username or an email.\n" "\n" "\n" "The 'Security Level' menu allows you to select " "one of the six preconfigured security levels\n" "provided with msec. These levels range from 'poor' security and ease of use, to\n" "'paranoid' config, suitable for very sensitive " "server applications:\n" "\n" "\n" "Poor: This is a totally unsafe but " "very\n" "easy to use security level. It should only be used for machines not " "connected to\n" "any network and that are not accessible to everybody.\n" "\n" "\n" "Standard: This is the standard " "security\n" "recommended for a computer that will be used to connect to the Internet as " "a\n" "client.\n" "\n" "\n" "High: There are already some\n" "restrictions, and more automatic checks are run every night.\n" "\n" "\n" "Higher: The security is now high " "enough\n" "to use the system as a server which can accept connections from many " "clients. If\n" "your machine is only a client on the Internet, you should choose a lower " "level.\n" "\n" "\n" "Paranoid: This is similar to the " "previous\n" "level, but the system is entirely closed and security features are at their\n" "maximum" msgstr "" #: standalone/draksec:154 standalone/harddrake2:202 #, fuzzy, c-format msgid "" "Description of the fields:\n" "\n" msgstr "Апісанне:" #: standalone/draksec:168 #, fuzzy, c-format msgid "(default value: %s)" msgstr "Па ўмаўчанні - %s" #: standalone/draksec:210 #, fuzzy, c-format msgid "Security Level:" msgstr "Бясьпека" #: standalone/draksec:217 #, fuzzy, c-format msgid "Security Administrator:" msgstr "Сістэмнае адміністраваньне" #: standalone/draksec:219 #, fuzzy, c-format msgid "Basic options" msgstr "Захаваць усталёўкі" #: standalone/draksec:233 #, fuzzy, c-format msgid "Network Options" msgstr "Сетка" #: standalone/draksec:233 #, fuzzy, c-format msgid "System Options" msgstr "Выкарыстоўваць існуючы раздзел" #: standalone/draksec:268 #, c-format msgid "Periodic Checks" msgstr "" #: standalone/draksec:298 #, c-format msgid "Please wait, setting security level..." msgstr "" #: standalone/draksec:304 #, c-format msgid "Please wait, setting security options..." msgstr "" #: standalone/draksound:47 #, fuzzy, c-format msgid "No Sound Card detected!" msgstr "Няма вузла каб выдаліць" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/draksound:50 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: standalone/draksound:57 #, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or " "the sndconfig program. Just type \"alsaconf\" or \"sndconfig\" in a console." msgstr "" #: standalone/draksplash:21 #, c-format msgid "" "package 'ImageMagick' is required to be able to complete configuration.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" #: standalone/draksplash:68 #, c-format msgid "first step creation" msgstr "" #: standalone/draksplash:71 #, fuzzy, c-format msgid "final resolution" msgstr "Памеры экрану" #: standalone/draksplash:72 #, fuzzy, c-format msgid "choose image file" msgstr "Выбар памераў" #: standalone/draksplash:73 #, fuzzy, c-format msgid "Theme name" msgstr "Мэнэджэр тэм" #: standalone/draksplash:78 #, c-format msgid "Browse" msgstr "Прагляд" #: standalone/draksplash:93 standalone/draksplash:158 #, fuzzy, c-format msgid "Configure bootsplash picture" msgstr "Настрйка драйверу Solaris" #: standalone/draksplash:96 #, c-format msgid "" "x coordinate of text box\n" "in number of characters" msgstr "" #: standalone/draksplash:97 #, c-format msgid "" "y coordinate of text box\n" "in number of characters" msgstr "" #: standalone/draksplash:98 #, c-format msgid "text width" msgstr "" #: standalone/draksplash:99 #, c-format msgid "text box height" msgstr "" #: standalone/draksplash:100 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" #: standalone/draksplash:101 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" #: standalone/draksplash:102 #, c-format msgid "the width of the progress bar" msgstr "" #: standalone/draksplash:103 #, c-format msgid "the height of the progress bar" msgstr "" #: standalone/draksplash:104 #, c-format msgid "the color of the progress bar" msgstr "" #: standalone/draksplash:119 #, c-format msgid "Preview" msgstr "Папярэдні прагляд" #: standalone/draksplash:121 #, fuzzy, c-format msgid "Save theme" msgstr "Тэма" #: standalone/draksplash:122 #, c-format msgid "Choose color" msgstr "Выбярыце колер" #: standalone/draksplash:125 #, c-format msgid "Display logo on Console" msgstr "" #: standalone/draksplash:126 #, c-format msgid "Make kernel message quiet by default" msgstr "" #: standalone/draksplash:161 standalone/draksplash:309 #: standalone/draksplash:454 #, c-format msgid "Notice" msgstr "Заўвага" #: standalone/draksplash:161 standalone/draksplash:309 #, c-format msgid "This theme does not yet have a bootsplash in %s!" msgstr "" #: standalone/draksplash:167 #, c-format msgid "choose image" msgstr "" #: standalone/draksplash:209 #, c-format msgid "saving Bootsplash theme..." msgstr "" #: standalone/draksplash:435 #, c-format msgid "ProgressBar color selection" msgstr "" #: standalone/draksplash:454 #, c-format msgid "You must choose an image file first!" msgstr "" #: standalone/draksplash:459 #, fuzzy, c-format msgid "Generating preview..." msgstr "Вызначэнне прыладаў..." #. -PO: First %s is theme name, second %s (in parenthesis) is resolution #: standalone/draksplash:497 #, c-format msgid "%s BootSplash (%s) preview" msgstr "" #. -PO: Do not alter the and tags #: standalone/draksplash:503 #, c-format msgid "" "The image \"%s\" cannot be load due to the following issue:\n" "\n" "%s" msgstr "" #: standalone/drakups:74 #, c-format msgid "Connected through a serial port or an usb cable" msgstr "" #: standalone/drakups:80 #, fuzzy, c-format msgid "Add an UPS device" msgstr "Аўдыяпрылада:" #: standalone/drakups:83 #, c-format msgid "" "Welcome to the UPS configuration utility.\n" "\n" "Here, you'll add a new UPS to your system.\n" msgstr "" #: standalone/drakups:90 #, c-format msgid "" "We're going to add an UPS device.\n" "\n" "Do you want to autodetect UPS devices connected to this machine or to " "manually select them?" msgstr "" #: standalone/drakups:93 #, fuzzy, c-format msgid "Autodetection" msgstr "Аўтаматычнае вызначэнне" #: standalone/drakups:101 standalone/harddrake2:231 #, fuzzy, c-format msgid "Detection in progress" msgstr "Стварэньне меню ўжо запушчана" #: standalone/drakups:120 standalone/drakups:156 standalone/logdrake:449 #: standalone/logdrake:455 #, fuzzy, c-format msgid "Congratulations" msgstr "Прыміце віншаванні!" #: standalone/drakups:121 #, c-format msgid "The wizard successfully added the following UPS devices:" msgstr "" #: standalone/drakups:123 #, c-format msgid "No new UPS devices was found" msgstr "" #: standalone/drakups:128 standalone/drakups:140 #, fuzzy, c-format msgid "UPS driver configuration" msgstr "Настройка драйверу Sun" #: standalone/drakups:128 #, fuzzy, c-format msgid "Please select your UPS model." msgstr "калі ласка, пазначце тып вашай мышы." #: standalone/drakups:129 #, c-format msgid "Manufacturer / Model:" msgstr "" #: standalone/drakups:140 #, c-format msgid "" "We are configuring the \"%s\" UPS from \"%s\".\n" "Please fill in its name, its driver and its port." msgstr "" #: standalone/drakups:145 #, c-format msgid "Name:" msgstr "Імя:" #: standalone/drakups:145 #, c-format msgid "The name of your ups" msgstr "" #: standalone/drakups:146 #, c-format msgid "The driver that manages your ups" msgstr "" #: standalone/drakups:147 #, c-format msgid "Port:" msgstr "Порт:" #: standalone/drakups:149 #, c-format msgid "The port on which is connected your ups" msgstr "" #: standalone/drakups:156 #, c-format msgid "The wizard successfully configured the new \"%s\" UPS device." msgstr "" #: standalone/drakups:246 #, fuzzy, c-format msgid "UPS devices" msgstr "USB прылады" #: standalone/drakups:247 standalone/drakups:266 standalone/drakups:282 #: standalone/harddrake2:83 standalone/harddrake2:109 #: standalone/harddrake2:116 #, c-format msgid "Name" msgstr "Назва" #: standalone/drakups:265 #, fuzzy, c-format msgid "UPS users" msgstr "Стыль" #: standalone/drakups:281 #, fuzzy, c-format msgid "Access Control Lists" msgstr "Акцэсуары" #: standalone/drakups:282 #, fuzzy, c-format msgid "IP mask" msgstr "Відарысы" #: standalone/drakups:294 #, c-format msgid "Rules" msgstr "Правілы" #: standalone/drakups:295 #, c-format msgid "Action" msgstr "Дзеяньні" #: standalone/drakups:295 standalone/drakvpn:1146 standalone/harddrake2:80 #, c-format msgid "Level" msgstr "Узровень" #: standalone/drakups:295 #, fuzzy, c-format msgid "ACL name" msgstr "Анімэ" #: standalone/drakups:325 standalone/drakups:329 standalone/drakups:338 #, fuzzy, c-format msgid "DrakUPS" msgstr "Dvorak (US)" #: standalone/drakups:335 #, fuzzy, c-format msgid "Welcome to the UPS configuration tools" msgstr "Канфігурацыя сістэмных сэрвісаў" #: standalone/drakvpn:73 #, fuzzy, c-format msgid "DrakVPN" msgstr "Dvorak" #: standalone/drakvpn:95 #, c-format msgid "The VPN connection is enabled." msgstr "" #: standalone/drakvpn:96 #, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" #: standalone/drakvpn:105 #, c-format msgid "Disabling VPN..." msgstr "" #: standalone/drakvpn:114 #, c-format msgid "The VPN connection is now disabled." msgstr "" #: standalone/drakvpn:121 #, fuzzy, c-format msgid "VPN connection currently disabled" msgstr "Сумеснае Інтэрнэт-злучэнне зараз забаронена" #: standalone/drakvpn:122 #, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" #: standalone/drakvpn:135 #, c-format msgid "Enabling VPN..." msgstr "" #: standalone/drakvpn:141 #, c-format msgid "The VPN connection is now enabled." msgstr "" #: standalone/drakvpn:155 standalone/drakvpn:183 #, c-format msgid "Simple VPN setup." msgstr "" #: standalone/drakvpn:156 #, c-format msgid "" "You are about to configure your computer to use a VPN connection.\n" "\n" "With this feature, computers on your local private network and computers\n" "on some other remote private networks, can share resources, through\n" "their respective firewalls, over the Internet, in a secure manner. \n" "\n" "The communication over the Internet is encrypted. The local and remote\n" "computers look as if they were on the same network.\n" "\n" "Make sure you have configured your Network/Internet access using\n" "drakconnect before going any further." msgstr "" #: standalone/drakvpn:184 #, c-format msgid "" "VPN connection.\n" "\n" "This program is based on the following projects:\n" " - FreeSwan: \t\t\thttp://www.freeswan.org/\n" " - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n" " - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n" " - ipsec-howto: \t\thttp://www.ipsec-howto.org\n" " - the docs and man pages coming with the %s package\n" "\n" "Please read AT LEAST the ipsec-howto docs\n" "before going any further." msgstr "" #: standalone/drakvpn:196 #, fuzzy, c-format msgid "Kernel module." msgstr "Індыкатар гучнасьці" #: standalone/drakvpn:197 #, c-format msgid "" "The kernel needs to have ipsec support.\n" "\n" "You're running a %s kernel version.\n" "\n" "This kernel has '%s' support." msgstr "" #: standalone/drakvpn:292 #, fuzzy, c-format msgid "Security Policies" msgstr "Бясьпека" #: standalone/drakvpn:292 #, c-format msgid "IKE daemon racoon" msgstr "" #: standalone/drakvpn:295 standalone/drakvpn:306 #, fuzzy, c-format msgid "Configuration file" msgstr "Канфігурацыя" #: standalone/drakvpn:296 #, c-format msgid "" "Configuration step!\n" "\n" "You need to define the Security Policies and then to \n" "configure the automatic key exchange (IKE) daemon. \n" "The KAME IKE daemon we're using is called 'racoon'.\n" "\n" "What would you like to configure?\n" msgstr "" #: standalone/drakvpn:307 #, c-format msgid "" "Next, we will configure the %s file.\n" "\n" "\n" "Simply click on Next.\n" msgstr "" #: standalone/drakvpn:325 standalone/drakvpn:685 #, fuzzy, c-format msgid "%s entries" msgstr ", %s сектараў" #: standalone/drakvpn:326 #, c-format msgid "" "The %s file contents\n" "is divided into sections.\n" "\n" "You can now:\n" "\n" " - display, add, edit, or remove sections, then\n" " - commit the changes\n" "\n" "What would you like to do?\n" msgstr "" #: standalone/drakvpn:333 standalone/drakvpn:694 #, c-format msgid "" "_:display here is a verb\n" "Display" msgstr "" #: standalone/drakvpn:333 standalone/drakvpn:694 #, c-format msgid "Commit" msgstr "Фіксацыя" #: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709 #: standalone/drakvpn:713 #, c-format msgid "" "_:display here is a verb\n" "Display configuration" msgstr "" #: standalone/drakvpn:352 #, c-format msgid "" "The %s file does not exist.\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose 'add'.\n" msgstr "" #: standalone/drakvpn:368 #, c-format msgid "ipsec.conf entries" msgstr "" #: standalone/drakvpn:369 #, c-format msgid "" "The %s file contains different sections.\n" "\n" "Here is its skeleton:\t'config setup' \n" "\t\t\t\t\t'conn default' \n" "\t\t\t\t\t'normal1'\n" "\t\t\t\t\t'normal2' \n" "\n" "You can now add one of these sections.\n" "\n" "Choose the section you would like to add.\n" msgstr "" #: standalone/drakvpn:376 #, fuzzy, c-format msgid "config setup" msgstr "Настроіць панэль" #: standalone/drakvpn:376 #, fuzzy, c-format msgid "conn %default" msgstr "Па дамаўленню" #: standalone/drakvpn:376 #, fuzzy, c-format msgid "normal conn" msgstr "Інфармацыя" #: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510 #, fuzzy, c-format msgid "Exists!" msgstr "Выход" #: standalone/drakvpn:383 standalone/drakvpn:424 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change its name.\n" msgstr "" #: standalone/drakvpn:400 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow this config\n" "setup section.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:405 #, fuzzy, c-format msgid "interfaces" msgstr "Сеткавыя інтэрфэйсы" #: standalone/drakvpn:406 #, c-format msgid "klipsdebug" msgstr "" #: standalone/drakvpn:407 #, c-format msgid "plutodebug" msgstr "" #: standalone/drakvpn:408 #, fuzzy, c-format msgid "plutoload" msgstr "загрузіць" #: standalone/drakvpn:409 #, c-format msgid "plutostart" msgstr "" #: standalone/drakvpn:410 #, c-format msgid "uniqueids" msgstr "" #: standalone/drakvpn:444 #, c-format msgid "" "This is the first section after the config\n" "setup one.\n" "\n" "Here you define the default settings. \n" "All the other sections will follow this one.\n" "The left settings are optional. If do not define\n" "them here, globally, you can define them in each\n" "section.\n" msgstr "" #: standalone/drakvpn:451 #, fuzzy, c-format msgid "PFS" msgstr "HFS" #: standalone/drakvpn:452 #, c-format msgid "keyingtries" msgstr "" #: standalone/drakvpn:453 #, fuzzy, c-format msgid "compress" msgstr "Gnometris" #: standalone/drakvpn:454 #, c-format msgid "disablearrivalcheck" msgstr "" #: standalone/drakvpn:455 standalone/drakvpn:494 #, c-format msgid "left" msgstr "зьлева" #: standalone/drakvpn:456 standalone/drakvpn:495 #, c-format msgid "leftcert" msgstr "" #: standalone/drakvpn:457 standalone/drakvpn:496 #, c-format msgid "leftrsasigkey" msgstr "" #: standalone/drakvpn:458 standalone/drakvpn:497 #, c-format msgid "leftsubnet" msgstr "" #: standalone/drakvpn:459 standalone/drakvpn:498 #, c-format msgid "leftnexthop" msgstr "" #: standalone/drakvpn:488 #, c-format msgid "" "Your %s file has several sections, or connections.\n" "\n" "You can now add a new section.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:491 #, fuzzy, c-format msgid "section name" msgstr "Імя злучэння" #: standalone/drakvpn:492 #, c-format msgid "authby" msgstr "" #: standalone/drakvpn:493 #, fuzzy, c-format msgid "auto" msgstr "Дзеяньні" #: standalone/drakvpn:499 #, c-format msgid "right" msgstr "зправа" #: standalone/drakvpn:500 #, fuzzy, c-format msgid "rightcert" msgstr "Прынтэр" #: standalone/drakvpn:501 #, c-format msgid "rightrsasigkey" msgstr "" #: standalone/drakvpn:502 #, c-format msgid "rightsubnet" msgstr "" #: standalone/drakvpn:503 #, c-format msgid "rightnexthop" msgstr "" #: standalone/drakvpn:511 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change the name of the section.\n" msgstr "" #: standalone/drakvpn:543 #, c-format msgid "" "Add a Security Policy.\n" "\n" "You can now add a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:576 standalone/drakvpn:826 #, fuzzy, c-format msgid "Edit section" msgstr "Рэдагаваць вылучаны радок" #: standalone/drakvpn:577 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to edit \n" "and then click on next.\n" msgstr "" #: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831 #: standalone/drakvpn:877 #, fuzzy, c-format msgid "Section names" msgstr "Імя злучэння" #: standalone/drakvpn:590 #, c-format msgid "Can not edit!" msgstr "" #: standalone/drakvpn:591 #, c-format msgid "" "You cannot edit this section.\n" "\n" "This section is mandatory for Freeswan 2.X.\n" "One has to specify version 2.0 on the top\n" "of the %s file, and eventually, disable or\n" "enable the opportunistic encryption.\n" msgstr "" #: standalone/drakvpn:600 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the config setup section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:611 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the default section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:624 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the normal section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:645 #, c-format msgid "" "Edit a Security Policy.\n" "\n" "You can now edit a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:656 standalone/drakvpn:873 #, fuzzy, c-format msgid "Remove section" msgstr "Аддалены прынтэр" #: standalone/drakvpn:657 standalone/drakvpn:874 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to remove\n" "and then click on next.\n" msgstr "" #: standalone/drakvpn:686 #, c-format msgid "" "The racoon.conf file configuration.\n" "\n" "The contents of this file is divided into sections.\n" "You can now:\n" " - display \t\t (display the file contents)\n" " - add\t\t\t (add one section)\n" " - edit \t\t\t (modify parameters of an existing section)\n" " - remove \t\t (remove an existing section)\n" " - commit \t\t (writes the changes to the real file)" msgstr "" #: standalone/drakvpn:714 #, c-format msgid "" "The %s file does not exist\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose configure.\n" msgstr "" #: standalone/drakvpn:728 #, c-format msgid "racoonf.conf entries" msgstr "" #: standalone/drakvpn:729 #, c-format msgid "" "The 'add' sections step.\n" "\n" "Here below is the racoon.conf file skeleton:\n" "\t'path'\n" "\t'remote'\n" "\t'sainfo' \n" "\n" "Choose the section you would like to add.\n" msgstr "" #: standalone/drakvpn:735 #, fuzzy, c-format msgid "path" msgstr "Шлях:" #: standalone/drakvpn:735 #, fuzzy, c-format msgid "remote" msgstr "Стварыць" #: standalone/drakvpn:735 #, fuzzy, c-format msgid "sainfo" msgstr "Інфармацыя" #: standalone/drakvpn:743 #, c-format msgid "" "The 'add path' section step.\n" "\n" "The path sections have to be on top of your racoon.conf file.\n" "\n" "Put your mouse over the certificate entry to obtain online help." msgstr "" #: standalone/drakvpn:746 #, c-format msgid "path type" msgstr "" #: standalone/drakvpn:750 #, c-format msgid "" "path include path: specifies a path to include\n" "a file. See File Inclusion.\n" "\tExample: path include '/etc/racoon'\n" "\n" "path pre_shared_key file: specifies a file containing\n" "pre-shared key(s) for various ID(s). See Pre-shared key File.\n" "\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n" "\n" "path certificate path: racoon(8) will search this directory\n" "if a certificate or certificate request is received.\n" "\tExample: path certificate '/etc/cert' ;\n" "\n" "File Inclusion: include file \n" "other configuration files can be included.\n" "\tExample: include \"remote.conf\" ;\n" "\n" "Pre-shared key File: Pre-shared key file defines a pair\n" "of the identifier and the shared secret key which are used at\n" "Pre-shared key authentication method in phase 1." msgstr "" #: standalone/drakvpn:770 standalone/drakvpn:863 #, fuzzy, c-format msgid "real file" msgstr "Абярыце файл" #: standalone/drakvpn:793 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your racoon.conf file.\n" "\n" "You can now choose the remote settings.\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:810 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your %s file.\n" "\n" "You can now choose the sainfo settings.\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:827 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here in the list below the one you want\n" "to edit and then click on next.\n" msgstr "" #: standalone/drakvpn:838 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "\n" "You can now edit the remote section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:847 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the sainfo section entries.\n" "\n" "Choose continue when you are done to write the data." msgstr "" #: standalone/drakvpn:855 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow these path\n" "sections.\n" "\n" "You can now edit the path entries.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:862 #, c-format msgid "path_type" msgstr "" #: standalone/drakvpn:903 #, c-format msgid "" "Everything has been configured.\n" "\n" "You may now share resources through the Internet,\n" "in a secure way, using a VPN connection.\n" "\n" "You should make sure that that the tunnels shorewall\n" "section is configured." msgstr "" #: standalone/drakvpn:923 #, c-format msgid "Sainfo source address" msgstr "" #: standalone/drakvpn:924 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.209 is the source address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.1.0/24 is the source address" msgstr "" #: standalone/drakvpn:941 #, c-format msgid "Sainfo source protocol" msgstr "" #: standalone/drakvpn:942 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe first 'any' allows any protocol for the source" msgstr "" #: standalone/drakvpn:956 #, c-format msgid "Sainfo destination address" msgstr "" #: standalone/drakvpn:957 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.218 is the destination address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.2.0/24 is the destination address" msgstr "" #: standalone/drakvpn:974 #, c-format msgid "Sainfo destination protocol" msgstr "" #: standalone/drakvpn:975 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe last 'any' allows any protocol for the destination" msgstr "" #: standalone/drakvpn:989 #, c-format msgid "PFS group" msgstr "" #: standalone/drakvpn:991 #, c-format msgid "" "define the group of Diffie-Hellman exponentiations.\n" "If you do not require PFS then you can omit this directive.\n" "Any proposal will be accepted if you do not specify one.\n" "group is one of the following: modp768, modp1024, modp1536.\n" "Or you can define 1, 2, or 5 as the DH group number." msgstr "" #: standalone/drakvpn:996 #, c-format msgid "Lifetime number" msgstr "" #: standalone/drakvpn:997 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will not be proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n" msgstr "" #: standalone/drakvpn:1013 #, c-format msgid "Lifetime unit" msgstr "" #: standalone/drakvpn:1015 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will not be proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and " "'hour'.\n" msgstr "" #: standalone/drakvpn:1031 standalone/drakvpn:1116 #, c-format msgid "Encryption algorithm" msgstr "" #: standalone/drakvpn:1033 #, fuzzy, c-format msgid "Authentication algorithm" msgstr "Аўтэнтыфікацыя" #: standalone/drakvpn:1035 #, fuzzy, c-format msgid "Compression algorithm" msgstr "Сэанс" #: standalone/drakvpn:1036 #, fuzzy, c-format msgid "deflate" msgstr "Па дамаўленню" #: standalone/drakvpn:1043 #, fuzzy, c-format msgid "Remote" msgstr "Аддалены прынтэр" #: standalone/drakvpn:1044 #, c-format msgid "" "remote (address | anonymous) [[port]] { statements }\n" "specifies the parameters for IKE phase 1 for each remote node.\n" "The default port is 500. If anonymous is specified, the state-\n" "ments apply to all peers which do not match any other remote\n" "directive.\n" "\n" "Examples: \n" "\n" "remote anonymous\n" "remote ::1 [8000]" msgstr "" #: standalone/drakvpn:1052 #, fuzzy, c-format msgid "Exchange mode" msgstr "Рэжым злучэння" #: standalone/drakvpn:1054 #, c-format msgid "" "defines the exchange mode for phase 1 when racoon is the\n" "initiator. Also it means the acceptable exchange mode\n" "when racoon is responder. More than one mode can be\n" "specified by separating them with a comma. All of the\n" "modes are acceptable. The first exchange mode is what\n" "racoon uses when it is the initiator.\n" msgstr "" #: standalone/drakvpn:1060 #, fuzzy, c-format msgid "Generate policy" msgstr "Асноўныя пашырэнні" #: standalone/drakvpn:1061 standalone/drakvpn:1077 standalone/drakvpn:1090 #, c-format msgid "off" msgstr "" #: standalone/drakvpn:1061 standalone/drakvpn:1077 standalone/drakvpn:1090 #, c-format msgid "on" msgstr "на" #: standalone/drakvpn:1062 #, c-format msgid "" "This directive is for the responder. Therefore you\n" "should set passive on in order that racoon(8) only\n" "becomes a responder. If the responder does not have any\n" "policy in SPD during phase 2 negotiation, and the direc-\n" "tive is set on, then racoon(8) will choice the first pro-\n" "posal in the SA payload from the initiator, and generate\n" "policy entries from the proposal. It is useful to nego-\n" "tiate with the client which is allocated IP address\n" "dynamically. Note that inappropriate policy might be\n" "installed into the responder's SPD by the initiator. So\n" "that other communication might fail if such policies\n" "installed due to some policy mismatches between the ini-\n" "tiator and the responder. This directive is ignored in\n" "the initiator case. The default value is off." msgstr "" #: standalone/drakvpn:1076 #, fuzzy, c-format msgid "Passive" msgstr "Прыпыніць" #: standalone/drakvpn:1078 #, c-format msgid "" "If you do not want to initiate the negotiation, set this\n" "to on. The default value is off. It is useful for a\n" "server." msgstr "" #: standalone/drakvpn:1081 #, fuzzy, c-format msgid "Certificate type" msgstr "Вызначыць тып файлу:" #: standalone/drakvpn:1083 #, fuzzy, c-format msgid "My certfile" msgstr "MM Series" #: standalone/drakvpn:1084 #, fuzzy, c-format msgid "Name of the certificate" msgstr "Імя друкаркі" #: standalone/drakvpn:1085 #, c-format msgid "My private key" msgstr "" #: standalone/drakvpn:1086 #, fuzzy, c-format msgid "Name of the private key" msgstr "Імя друкаркі" #: standalone/drakvpn:1087 #, fuzzy, c-format msgid "Peers certfile" msgstr "Абярыце файл" #: standalone/drakvpn:1088 #, c-format msgid "Name of the peers certificate" msgstr "" #: standalone/drakvpn:1089 #, fuzzy, c-format msgid "Verify cert" msgstr "вельмі добра" #: standalone/drakvpn:1091 #, c-format msgid "" "If you do not want to verify the peer's certificate for\n" "some reason, set this to off. The default is on." msgstr "" #: standalone/drakvpn:1093 #, c-format msgid "My identifier" msgstr "" #: standalone/drakvpn:1094 #, c-format msgid "" "specifies the identifier sent to the remote host and the\n" "type to use in the phase 1 negotiation. address, FQDN,\n" "user_fqdn, keyid and asn1dn can be used as an idtype.\n" "they are used like:\n" "\tmy_identifier address [address];\n" "\t\tthe type is the IP address. This is the default\n" "\t\ttype if you do not specify an identifier to use.\n" "\tmy_identifier user_fqdn string;\n" "\t\tthe type is a USER_FQDN (user fully-qualified\n" "\t\tdomain name).\n" "\tmy_identifier FQDN string;\n" "\t\tthe type is a FQDN (fully-qualified domain name).\n" "\tmy_identifier keyid file;\n" "\t\tthe type is a KEY_ID.\n" "\tmy_identifier asn1dn [string];\n" "\t\tthe type is an ASN.1 distinguished name. If\n" "\t\tstring is omitted, racoon(8) will get DN from\n" "\t\tSubject field in the certificate.\n" "\n" "Examples: \n" "\n" "my_identifier user_fqdn \"myemail@mydomain.com\"" msgstr "" #: standalone/drakvpn:1114 #, fuzzy, c-format msgid "Peers identifier" msgstr "Прынтэры" #: standalone/drakvpn:1115 #, fuzzy, c-format msgid "Proposal" msgstr "Пратакол" #: standalone/drakvpn:1117 #, c-format msgid "" "specify the encryption algorithm used for the\n" "phase 1 negotiation. This directive must be defined. \n" "algorithm is one of the following: \n" "\n" "DES, 3DES, blowfish, cast128 for oakley.\n" "\n" "For other transforms, this statement should not be used." msgstr "" #: standalone/drakvpn:1124 #, c-format msgid "Hash algorithm" msgstr "" #: standalone/drakvpn:1126 #, fuzzy, c-format msgid "DH group" msgstr "Выберыце групу" #: standalone/drakvpn:1133 #, c-format msgid "Command" msgstr "Каманда" #: standalone/drakvpn:1134 #, fuzzy, c-format msgid "Source IP range" msgstr "Мэнэджэр сэрвісаў" #: standalone/drakvpn:1135 #, c-format msgid "Destination IP range" msgstr "" #: standalone/drakvpn:1136 #, c-format msgid "Upper-layer protocol" msgstr "" #: standalone/drakvpn:1136 standalone/drakvpn:1143 #, fuzzy, c-format msgid "any" msgstr "Панэль" #: standalone/drakvpn:1138 #, c-format msgid "Flag" msgstr "Сьцяг" #: standalone/drakvpn:1139 #, c-format msgid "Direction" msgstr "Накірунак" #: standalone/drakvpn:1140 #, c-format msgid "IPsec policy" msgstr "" #: standalone/drakvpn:1140 #, fuzzy, c-format msgid "ipsec" msgstr "Шум" #: standalone/drakvpn:1140 #, fuzzy, c-format msgid "discard" msgstr "Майстар стварэння" #: standalone/drakvpn:1143 #, c-format msgid "Mode" msgstr "Рэжым" #: standalone/drakvpn:1143 #, fuzzy, c-format msgid "tunnel" msgstr "няма" #: standalone/drakvpn:1143 #, fuzzy, c-format msgid "transport" msgstr "gtranslator" #: standalone/drakvpn:1145 #, fuzzy, c-format msgid "Source/destination" msgstr "Інфармацыя аб гуку" #: standalone/drakvpn:1146 #, c-format msgid "require" msgstr "" #: standalone/drakvpn:1146 #, c-format msgid "default" msgstr "Па дамаўленню" #: standalone/drakvpn:1146 #, fuzzy, c-format msgid "use" msgstr "Мыш" #: standalone/drakvpn:1146 #, fuzzy, c-format msgid "unique" msgstr "Марцінік" #: standalone/drakxtv:45 #, c-format msgid "USA (broadcast)" msgstr "" #: standalone/drakxtv:45 #, fuzzy, c-format msgid "USA (cable)" msgstr "(дазволіць)" #: standalone/drakxtv:45 #, c-format msgid "USA (cable-hrc)" msgstr "" #: standalone/drakxtv:45 #, fuzzy, c-format msgid "Canada (cable)" msgstr "Канадскі (Квебэк)" #: standalone/drakxtv:46 #, c-format msgid "Japan (broadcast)" msgstr "" #: standalone/drakxtv:46 #, fuzzy, c-format msgid "Japan (cable)" msgstr "(дазволіць)" #: standalone/drakxtv:46 #, c-format msgid "China (broadcast)" msgstr "" #: standalone/drakxtv:47 #, c-format msgid "West Europe" msgstr "" #: standalone/drakxtv:47 #, c-format msgid "East Europe" msgstr "" #: standalone/drakxtv:47 #, fuzzy, c-format msgid "France [SECAM]" msgstr "Францыя" #: standalone/drakxtv:48 #, fuzzy, c-format msgid "Newzealand" msgstr "Новая Зэляндыя" #: standalone/drakxtv:51 #, c-format msgid "Australian Optus cable TV" msgstr "" #: standalone/drakxtv:85 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" #: standalone/drakxtv:87 #, c-format msgid "TV norm:" msgstr "" #: standalone/drakxtv:88 #, fuzzy, c-format msgid "Area:" msgstr "Карэйская:" #: standalone/drakxtv:93 #, fuzzy, c-format msgid "Scanning for TV channels in progress..." msgstr "Захаваньне ўжо выконваецца" #: standalone/drakxtv:103 #, fuzzy, c-format msgid "Scanning for TV channels" msgstr "Адзіночны канал" #: standalone/drakxtv:107 #, fuzzy, c-format msgid "There was an error while scanning for TV channels" msgstr "Атрымалася памылка ўпарадкавання пакетаў:" #: standalone/drakxtv:110 #, c-format msgid "Have a nice day!" msgstr "" #: standalone/drakxtv:111 #, c-format msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "" #: standalone/drakxtv:149 #, c-format msgid "No TV Card detected!" msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/drakxtv:151 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: standalone/harddrake2:23 #, fuzzy, c-format msgid "Alternative drivers" msgstr "Альтэрнатыва" #: standalone/harddrake2:24 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "" #: standalone/harddrake2:27 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" #: standalone/harddrake2:29 standalone/harddrake2:144 #, fuzzy, c-format msgid "Bus identification" msgstr "Аўтэнтыфікацыя" #: standalone/harddrake2:30 #, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "" #: standalone/harddrake2:33 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" #: standalone/harddrake2:36 #, c-format msgid "Drive capacity" msgstr "" #: standalone/harddrake2:36 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "" #: standalone/harddrake2:37 #, c-format msgid "this field describes the device" msgstr "" #: standalone/harddrake2:38 #, fuzzy, c-format msgid "Old device file" msgstr "Абярыце файл" #: standalone/harddrake2:39 #, c-format msgid "old static device name used in dev package" msgstr "" #: standalone/harddrake2:40 #, fuzzy, c-format msgid "New devfs device" msgstr "Прылада-шлюз" #: standalone/harddrake2:41 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "" #. -PO: here "module" is the "jargon term" for a kernel driver #: standalone/harddrake2:44 #, fuzzy, c-format msgid "Module" msgstr "Мыш" #: standalone/harddrake2:44 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "" #: standalone/harddrake2:45 #, fuzzy, c-format msgid "Extended partitions" msgstr "Стварэнне новага раздзелу" #: standalone/harddrake2:45 #, fuzzy, c-format msgid "the number of extended partitions" msgstr "Не хапае прасторы для стварэння новых раздзелаў" #: standalone/harddrake2:46 #, fuzzy, c-format msgid "Geometry" msgstr "Рэтра" #: standalone/harddrake2:46 #, c-format msgid "Cylinder/head/sectors geometry of the disk" msgstr "" #: standalone/harddrake2:47 #, fuzzy, c-format msgid "Disk controller" msgstr "Кіраванне" #: standalone/harddrake2:47 #, c-format msgid "the disk controller on the host side" msgstr "" #: standalone/harddrake2:48 #, c-format msgid "class of hardware device" msgstr "" #: standalone/harddrake2:49 standalone/harddrake2:81 #: standalone/printerdrake:211 #, c-format msgid "Model" msgstr "Мадэль" #: standalone/harddrake2:49 #, c-format msgid "hard disk model" msgstr "" #: standalone/harddrake2:50 #, fuzzy, c-format msgid "network printer port" msgstr "Сеткавы прынтэр (TCP/Socket)" #: standalone/harddrake2:51 #, fuzzy, c-format msgid "Primary partitions" msgstr "Фарматаванне раздзелаў" #: standalone/harddrake2:51 #, fuzzy, c-format msgid "the number of the primary partitions" msgstr "Першы сектар загрузачнага раздзелу" #: standalone/harddrake2:52 #, fuzzy, c-format msgid "the vendor name of the device" msgstr "Выкарыстаць альтэрнатыўную прыладу" #: standalone/harddrake2:53 #, c-format msgid "Bus PCI #" msgstr "" #: standalone/harddrake2:53 #, fuzzy, c-format msgid "the PCI bus on which the device is plugged" msgstr "Калі ласка, пазначце послядоўны порт, да якога падключана вашая мыш." #: standalone/harddrake2:54 #, fuzzy, c-format msgid "PCI device #" msgstr "USB прылады" #: standalone/harddrake2:54 #, fuzzy, c-format msgid "PCI device number" msgstr "Нумар тэлефону" #: standalone/harddrake2:55 #, c-format msgid "PCI function #" msgstr "" #: standalone/harddrake2:55 #, fuzzy, c-format msgid "PCI function number" msgstr "Імя злучэння" #: standalone/harddrake2:56 #, fuzzy, c-format msgid "Vendor ID" msgstr "Рэдактары" #: standalone/harddrake2:56 #, c-format msgid "this is the standard numerical identifier of the vendor" msgstr "" #: standalone/harddrake2:57 #, fuzzy, c-format msgid "Device ID" msgstr "Прылада:" #: standalone/harddrake2:57 #, fuzzy, c-format msgid "this is the numerical identifier of the device" msgstr "Выкарыстаць альтэрнатыўную прыладу" #: standalone/harddrake2:58 #, c-format msgid "Sub vendor ID" msgstr "" #: standalone/harddrake2:58 #, c-format msgid "this is the minor numerical identifier of the vendor" msgstr "" #: standalone/harddrake2:59 #, fuzzy, c-format msgid "Sub device ID" msgstr "USB прылады" #: standalone/harddrake2:59 #, fuzzy, c-format msgid "this is the minor numerical identifier of the device" msgstr "Выкарыстаць альтэрнатыўную прыладу" #: standalone/harddrake2:60 #, fuzzy, c-format msgid "Device USB ID" msgstr "Прылада:" #: standalone/harddrake2:60 #, c-format msgid ".." msgstr "" #: standalone/harddrake2:64 #, c-format msgid "Bogomips" msgstr "" #: standalone/harddrake2:64 #, c-format msgid "" "the GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" #: standalone/harddrake2:65 #, fuzzy, c-format msgid "Cache size" msgstr "памер блоку" #: standalone/harddrake2:65 #, c-format msgid "size of the (second level) cpu cache" msgstr "" #. -PO: here "comas" is the medical coma, not the lexical coma!! #: standalone/harddrake2:68 #, c-format msgid "Coma bug" msgstr "" #: standalone/harddrake2:68 #, c-format msgid "whether this cpu has the Cyrix 6x86 Coma bug" msgstr "" #: standalone/harddrake2:69 #, c-format msgid "Cpuid family" msgstr "" #: standalone/harddrake2:69 #, c-format msgid "family of the cpu (eg: 6 for i686 class)" msgstr "" #: standalone/harddrake2:70 #, fuzzy, c-format msgid "Cpuid level" msgstr "узровень" #: standalone/harddrake2:70 #, c-format msgid "information level that can be obtained through the cpuid instruction" msgstr "" #: standalone/harddrake2:71 #, c-format msgid "Frequency (MHz)" msgstr "" #: standalone/harddrake2:71 #, c-format msgid "" "the CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" #: standalone/harddrake2:72 #, c-format msgid "Flags" msgstr "Сьцягі" #: standalone/harddrake2:72 #, c-format msgid "CPU flags reported by the kernel" msgstr "" #: standalone/harddrake2:73 #, c-format msgid "Fdiv bug" msgstr "" #: standalone/harddrake2:74 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" #: standalone/harddrake2:75 #, c-format msgid "Is FPU present" msgstr "" #: standalone/harddrake2:75 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "" #: standalone/harddrake2:76 #, c-format msgid "Whether the FPU has an irq vector" msgstr "" #: standalone/harddrake2:76 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" #: standalone/harddrake2:77 #, c-format msgid "F00f bug" msgstr "" #: standalone/harddrake2:77 #, c-format msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "" #: standalone/harddrake2:78 #, c-format msgid "Halt bug" msgstr "" #: standalone/harddrake2:79 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" #: standalone/harddrake2:80 #, c-format msgid "sub generation of the cpu" msgstr "" #: standalone/harddrake2:81 #, c-format msgid "generation of the cpu (eg: 8 for Pentium III, ...)" msgstr "" #: standalone/harddrake2:82 #, fuzzy, c-format msgid "Model name" msgstr "Уласнае імя" #: standalone/harddrake2:82 #, c-format msgid "official vendor name of the cpu" msgstr "" #: standalone/harddrake2:83 #, c-format msgid "the name of the CPU" msgstr "" #: standalone/harddrake2:84 #, fuzzy, c-format msgid "Processor ID" msgstr "Працэсар" #: standalone/harddrake2:84 #, c-format msgid "the number of the processor" msgstr "" #: standalone/harddrake2:85 #, fuzzy, c-format msgid "Model stepping" msgstr "Настройкі мышы" #: standalone/harddrake2:85 #, c-format msgid "stepping of the cpu (sub model (generation) number)" msgstr "" #: standalone/harddrake2:86 #, c-format msgid "the vendor name of the processor" msgstr "" #: standalone/harddrake2:87 #, fuzzy, c-format msgid "Write protection" msgstr "Прынтэры" #: standalone/harddrake2:87 #, c-format msgid "" "the WP flag in the CR0 register of the cpu enforce write protection at the " "memory page level, thus enabling the processor to prevent unchecked kernel " "accesses to user memory (aka this is a bug guard)" msgstr "" #: standalone/harddrake2:91 #, fuzzy, c-format msgid "Floppy format" msgstr "Фарматаваньне гнуткіх дыскаў" #: standalone/harddrake2:91 #, c-format msgid "format of floppies supported by the drive" msgstr "" #: standalone/harddrake2:95 #, c-format msgid "Channel" msgstr "Канал" #: standalone/harddrake2:95 #, fuzzy, c-format msgid "EIDE/SCSI channel" msgstr "Двайны канал" #: standalone/harddrake2:96 #, fuzzy, c-format msgid "Disk identifier" msgstr "Прынтэры" #: standalone/harddrake2:96 #, c-format msgid "usually the disk serial number" msgstr "" #: standalone/harddrake2:97 #, fuzzy, c-format msgid "Logical unit number" msgstr "Гульня ў косьці" #: standalone/harddrake2:97 #, c-format msgid "" "the SCSI target number (LUN). SCSI devices connected to a host are uniquely " "identified by a\n" "channel number, a target id and a logical unit number" msgstr "" #. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...) #: standalone/harddrake2:104 #, fuzzy, c-format msgid "Installed size" msgstr "Усталяванне сістэмы" #: standalone/harddrake2:104 #, c-format msgid "Installed size of the memory bank" msgstr "" #: standalone/harddrake2:105 #, fuzzy, c-format msgid "Enabled Size" msgstr "Дазволіць пашырэнне" #: standalone/harddrake2:105 #, c-format msgid "Enabled size of the memory bank" msgstr "" #: standalone/harddrake2:106 #, fuzzy, c-format msgid "type of the memory device" msgstr "Выкарыстаць альтэрнатыўную прыладу" #: standalone/harddrake2:107 #, c-format msgid "Speed" msgstr "Хуткасьць" #: standalone/harddrake2:107 #, c-format msgid "Speed of the memory bank" msgstr "" #: standalone/harddrake2:108 #, fuzzy, c-format msgid "Bank connections" msgstr "Размеркаванне" #: standalone/harddrake2:109 #, c-format msgid "Socket designation of the memory bank" msgstr "" #: standalone/harddrake2:113 #, fuzzy, c-format msgid "Device file" msgstr "Абярыце файл" #: standalone/harddrake2:113 #, c-format msgid "" "the device file used to communicate with the kernel driver for the mouse" msgstr "" #: standalone/harddrake2:114 #, c-format msgid "Emulated wheel" msgstr "" #: standalone/harddrake2:114 #, c-format msgid "whether the wheel is emulated or not" msgstr "" #: standalone/harddrake2:115 #, fuzzy, c-format msgid "the type of the mouse" msgstr "Калі ласка, зрабіце некалькі рухаў мышшу." #: standalone/harddrake2:116 #, fuzzy, c-format msgid "the name of the mouse" msgstr "Выкарыстаць альтэрнатыўную прыладу" #: standalone/harddrake2:117 #, fuzzy, c-format msgid "Number of buttons" msgstr "2 кнопкі" #: standalone/harddrake2:117 #, c-format msgid "the number of buttons the mouse has" msgstr "" #: standalone/harddrake2:118 #, fuzzy, c-format msgid "the type of bus on which the mouse is connected" msgstr "Калі ласка, пазначце послядоўны порт, да якога падключана вашая мыш." #: standalone/harddrake2:119 #, c-format msgid "Mouse protocol used by X11" msgstr "" #: standalone/harddrake2:119 #, c-format msgid "the protocol that the graphical desktop use with the mouse" msgstr "" #: standalone/harddrake2:126 standalone/harddrake2:135 #: standalone/harddrake2:142 standalone/harddrake2:150 #: standalone/harddrake2:316 #, fuzzy, c-format msgid "Identification" msgstr "Аўтэнтыфікацыя" #: standalone/harddrake2:127 standalone/harddrake2:143 #, fuzzy, c-format msgid "Connection" msgstr "Імя злучэння" #: standalone/harddrake2:136 #, fuzzy, c-format msgid "Performances" msgstr "Усталяваньні" #: standalone/harddrake2:137 #, fuzzy, c-format msgid "Bugs" msgstr "Прац." #: standalone/harddrake2:138 #, c-format msgid "FPU" msgstr "" #: standalone/harddrake2:146 #, fuzzy, c-format msgid "Partitions" msgstr "Раздзел %s" #: standalone/harddrake2:151 #, c-format msgid "Features" msgstr "Магчымасьці" #. -PO: please keep all "/" characters !!! #: standalone/harddrake2:174 standalone/logdrake:77 #: standalone/printerdrake:134 standalone/printerdrake:147 #, c-format msgid "/_Options" msgstr "/_Налады" #: standalone/harddrake2:175 standalone/harddrake2:197 standalone/logdrake:79 #: standalone/printerdrake:159 standalone/printerdrake:161 #: standalone/printerdrake:164 standalone/printerdrake:166 #, c-format msgid "/_Help" msgstr "/_Дапамога" #: standalone/harddrake2:179 #, fuzzy, c-format msgid "/Autodetect _printers" msgstr "Аддалены прынтэр" #: standalone/harddrake2:180 #, c-format msgid "/Autodetect _modems" msgstr "" #: standalone/harddrake2:181 #, c-format msgid "/Autodetect _jaz drives" msgstr "" #: standalone/harddrake2:188 #, c-format msgid "/_Upload the hardware list" msgstr "" #: standalone/harddrake2:188 standalone/printerdrake:140 #, c-format msgid "/_Quit" msgstr "/_Выйсьці" #: standalone/harddrake2:199 #, fuzzy, c-format msgid "/_Fields description" msgstr "Апісанне" #: standalone/harddrake2:201 #, c-format msgid "Harddrake help" msgstr "" #: standalone/harddrake2:210 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" #: standalone/harddrake2:216 standalone/printerdrake:164 #, c-format msgid "/_Report Bug" msgstr "/_Паведаміць пра памылку" #: standalone/harddrake2:218 standalone/printerdrake:166 #, c-format msgid "/_About..." msgstr "/_Пра..." #: standalone/harddrake2:219 #, c-format msgid "About Harddrake" msgstr "Пра Harddrake" #. -PO: Do not alter the and tags #: standalone/harddrake2:221 #, c-format msgid "" "This is HardDrake, a %s hardware configuration tool.\n" "Version: %s\n" "Author: Thierry Vignaud <" "tvignaud@mandrakesoft.com>\n" "\n" msgstr "" #: standalone/harddrake2:238 #, fuzzy, c-format msgid "Harddrake2" msgstr "Пра MenuDrake" #: standalone/harddrake2:253 #, fuzzy, c-format msgid "Detected hardware" msgstr "Гл. апісанне абсталявання" #: standalone/harddrake2:258 #, fuzzy, c-format msgid "Configure module" msgstr "Настройка мышы" #: standalone/harddrake2:265 #, fuzzy, c-format msgid "Run config tool" msgstr "Канфігурацыя сістэмных сэрвісаў" #: standalone/harddrake2:303 standalone/net_monitor:108 #: standalone/net_monitor:109 standalone/net_monitor:114 #, c-format msgid "unknown" msgstr "невядома" #: standalone/harddrake2:304 standalone/printerdrake:298 #: standalone/printerdrake:336 #, c-format msgid "Unknown" msgstr "Невядома" #: standalone/harddrake2:324 #, c-format msgid "Misc" msgstr "Рознае" #: standalone/harddrake2:339 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "" #: standalone/harddrake2:391 #, fuzzy, c-format msgid "secondary" msgstr "секунд" #: standalone/harddrake2:391 #, fuzzy, c-format msgid "primary" msgstr "Пятніца" #: standalone/harddrake2:395 #, fuzzy, c-format msgid "burner" msgstr "Прынтэр" #: standalone/harddrake2:395 #, c-format msgid "DVD" msgstr "" #: standalone/harddrake2:525 #, c-format msgid "Upload the hardware list" msgstr "" #: standalone/harddrake2:530 #, c-format msgid "Account:" msgstr "Рахунак:" #: standalone/harddrake2:531 #, c-format msgid "Password:" msgstr "Пароль:" #: standalone/harddrake2:532 #, c-format msgid "Hostname:" msgstr "Імя машыны:" #: standalone/keyboarddrake:29 #, c-format msgid "Please, choose your keyboard layout." msgstr "Калі ласка, абярыце тып клавіятуры." #: standalone/keyboarddrake:45 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "Вы жадаеце каб BackSpace працаваў у кансолі як Delete?" #: standalone/localedrake:38 #, fuzzy, c-format msgid "LocaleDrake" msgstr "Гульня ў косьці" #: standalone/localedrake:67 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "" #: standalone/logdrake:50 #, fuzzy, c-format msgid "Mandrakelinux Tools Logs" msgstr "Цэнтар кіраваньня" #: standalone/logdrake:51 #, c-format msgid "Logdrake" msgstr "" #: standalone/logdrake:64 #, fuzzy, c-format msgid "Show only for the selected day" msgstr "Ня знойдзена дадзеных для выбранага вузла" #: standalone/logdrake:71 #, c-format msgid "/File/_New" msgstr "/Файл/_Стварыць" #: standalone/logdrake:71 #, fuzzy, c-format msgid "N" msgstr "Q" #: standalone/logdrake:72 #, c-format msgid "/File/_Open" msgstr "/Файл/_Адкрыць" #: standalone/logdrake:72 #, fuzzy, c-format msgid "O" msgstr "Q" #: standalone/logdrake:73 #, c-format msgid "/File/_Save" msgstr "/Файл/_Захаваць" #: standalone/logdrake:73 #, fuzzy, c-format msgid "S" msgstr "Q" #: standalone/logdrake:74 #, c-format msgid "/File/Save _As" msgstr "/Файл/Захаваць _як" #: standalone/logdrake:75 #, c-format msgid "/File/-" msgstr "/Файл/-" #: standalone/logdrake:78 #, c-format msgid "/Options/Test" msgstr "/Налады/Праверыць" #: standalone/logdrake:80 #, c-format msgid "/Help/_About..." msgstr "/Дапамога/_Пра..." #: standalone/logdrake:109 #, c-format msgid "" "_:this is the auth.log log file\n" "Authentication" msgstr "" #: standalone/logdrake:110 #, c-format msgid "" "_:this is the user.log log file\n" "User" msgstr "" #: standalone/logdrake:111 #, c-format msgid "" "_:this is the /var/log/messages log file\n" "Messages" msgstr "" #: standalone/logdrake:112 #, c-format msgid "" "_:this is the /var/log/syslog log file\n" "Syslog" msgstr "" #: standalone/logdrake:116 #, fuzzy, c-format msgid "search" msgstr "Сакавік" #: standalone/logdrake:128 #, c-format msgid "A tool to monitor your logs" msgstr "" #: standalone/logdrake:129 standalone/net_monitor:99 #, c-format msgid "Settings" msgstr "Усталёўкі" #: standalone/logdrake:134 #, fuzzy, c-format msgid "Matching" msgstr "Нічога" #: standalone/logdrake:135 #, fuzzy, c-format msgid "but not matching" msgstr "Мэнэджэр файлаў" #: standalone/logdrake:139 #, fuzzy, c-format msgid "Choose file" msgstr "Выбар памераў" #: standalone/logdrake:148 #, c-format msgid "Calendar" msgstr "Каляндар" #: standalone/logdrake:158 #, fuzzy, c-format msgid "Content of the file" msgstr "Далучэнне да Інтэрнэту" #: standalone/logdrake:162 standalone/logdrake:399 #, fuzzy, c-format msgid "Mail alert" msgstr "Калькулятар" #: standalone/logdrake:169 #, c-format msgid "The alert wizard has failed unexpectedly:" msgstr "" #: standalone/logdrake:221 #, c-format msgid "please wait, parsing file: %s" msgstr "" #: standalone/logdrake:376 #, c-format msgid "Apache World Wide Web Server" msgstr "" #: standalone/logdrake:377 #, fuzzy, c-format msgid "Domain Name Resolver" msgstr "Імя дамену" #: standalone/logdrake:378 #, fuzzy, c-format msgid "Ftp Server" msgstr "Сервак" #: standalone/logdrake:379 #, c-format msgid "Postfix Mail Server" msgstr "" #: standalone/logdrake:380 #, fuzzy, c-format msgid "Samba Server" msgstr "NIS сэервер:" #: standalone/logdrake:382 #, fuzzy, c-format msgid "Webmin Service" msgstr "Прылады" #: standalone/logdrake:383 #, fuzzy, c-format msgid "Xinetd Service" msgstr "Сервер друку" #: standalone/logdrake:394 #, fuzzy, c-format msgid "Configure the mail alert system" msgstr "Настроіць праверку правапісу" #: standalone/logdrake:395 #, c-format msgid "Stop the mail alert system" msgstr "" #: standalone/logdrake:402 #, fuzzy, c-format msgid "Mail alert configuration" msgstr "Канфігурацыя" #: standalone/logdrake:403 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" #: standalone/logdrake:406 #, fuzzy, c-format msgid "What do you want to do?" msgstr "Які пратакол вы жадаеце выкарыстоўваць?" #: standalone/logdrake:413 #, fuzzy, c-format msgid "Services settings" msgstr "Настройка прылады" #: standalone/logdrake:414 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "" #: standalone/logdrake:421 #, fuzzy, c-format msgid "Load setting" msgstr "Настройкі клявіятуры" #: standalone/logdrake:422 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "" #: standalone/logdrake:423 #, c-format msgid "" "_: load here is a noun, the load of the system\n" "Load" msgstr "" #: standalone/logdrake:428 #, fuzzy, c-format msgid "Alert configuration" msgstr "Настройка Xorg" #: standalone/logdrake:429 #, c-format msgid "Please enter your email address below " msgstr "" #: standalone/logdrake:430 #, c-format msgid "and enter the name (or the IP) of the SMTP server you wish to use" msgstr "" #: standalone/logdrake:449 #, c-format msgid "The wizard successfully configured the mail alert." msgstr "" #: standalone/logdrake:455 #, c-format msgid "The wizard successfully disabled the mail alert." msgstr "" #: standalone/logdrake:514 #, fuzzy, c-format msgid "Save as.." msgstr "Захаваць спіс" #: standalone/mousedrake:31 #, c-format msgid "Please choose your mouse type." msgstr "калі ласка, пазначце тып вашай мышы." #: standalone/mousedrake:44 #, c-format msgid "Emulate third button?" msgstr "Эмуляваць трэцюю кнопку?" #: standalone/mousedrake:61 #, fuzzy, c-format msgid "Mouse test" msgstr "Mouse Systems" #: standalone/mousedrake:64 #, fuzzy, c-format msgid "Please test your mouse:" msgstr "Калі ласка, зрабіце некалькі рухаў мышшу." #: standalone/net_applet:34 #, fuzzy, c-format msgid "Network is up on interface %s" msgstr "Сеткавы інтэрфейс" #. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below #: standalone/net_applet:42 #, fuzzy, c-format msgid "Network is down on interface %s. Click on \"Configure Network\"" msgstr "Сеткавы інтэрфейс" #: standalone/net_applet:57 standalone/net_monitor:473 #, fuzzy, c-format msgid "Connect %s" msgstr "Імя злучэння" #: standalone/net_applet:58 standalone/net_monitor:473 #, c-format msgid "Disconnect %s" msgstr "" #: standalone/net_applet:59 #, fuzzy, c-format msgid "Monitor Network" msgstr "Сетка" #: standalone/net_applet:60 #, fuzzy, c-format msgid "Configure Network" msgstr "Настройка сеткі" #: standalone/net_applet:69 #, fuzzy, c-format msgid "Watched interface" msgstr "Сеткавыя інтэрфэйсы" #: standalone/net_applet:78 #, c-format msgid "Profiles" msgstr "Профілі" #. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/net_applet:61 standalone/printerdrake:238 #, c-format msgid "Refresh" msgstr "Аднавіць" #: standalone/net_applet:62 #, c-format msgid "Get Online Help" msgstr "" #: standalone/net_applet:177 #, fuzzy, c-format msgid "Interactive intrusion detection" msgstr "Функцыі стварэньня інтэрфэйса:" #: standalone/net_applet:181 #, c-format msgid "Always launch on startup" msgstr "" #: standalone/net_applet:230 #, c-format msgid "A port scanning attack has been attempted by %s." msgstr "" #: standalone/net_applet:231 #, fuzzy, c-format msgid "The %s service has been attacked by %s." msgstr "Гэтая падзея была зьменена." #: standalone/net_applet:232 #, c-format msgid "A password cracking attack has been attempted by %s." msgstr "" #: standalone/net_applet:240 #, fuzzy, c-format msgid "Active Firewall: intrusion detected" msgstr "Знойдзена сістэма сеткавай бяспекі (firewall)!" #: standalone/net_applet:251 #, fuzzy, c-format msgid "Do you want to blacklist the attacker?" msgstr "Вы жадаеце скончыць гульню?" #: standalone/net_applet:265 #, c-format msgid "Always blacklist (do not ask again)" msgstr "" #: standalone/net_applet:268 #, fuzzy, c-format msgid "Attack details" msgstr "Падрабязнасці" #: standalone/net_applet:272 #, fuzzy, c-format msgid "Attack time: %s" msgstr "Укласьці файл(ы)" #: standalone/net_applet:273 #, c-format msgid "Network interface: %s" msgstr "Сеткавы інтэрфейс: %s" #: standalone/net_applet:274 #, fuzzy, c-format msgid "Attack type: %s" msgstr "Тып: " #: standalone/net_applet:275 #, c-format msgid "Protocol: %s" msgstr "Пратакол: %s" #: standalone/net_applet:276 #, fuzzy, c-format msgid "Attacker IP address: %s" msgstr "IP адрас" #: standalone/net_applet:277 #, fuzzy, c-format msgid "Attacker hostname: %s" msgstr "Адбыўся збой пад час атрыманьня назвы вузла: %s\n" #: standalone/net_applet:278 #, fuzzy, c-format msgid "Service attacked: %s" msgstr "Кіраваньне сэрвісамі" #: standalone/net_applet:279 #, fuzzy, c-format msgid "Port attacked: %s" msgstr "Порт:" #: standalone/net_applet:280 #, c-format msgid "Type of ICMP attack: %s" msgstr "" #: standalone/net_monitor:61 standalone/net_monitor:66 #, fuzzy, c-format msgid "Network Monitoring" msgstr "Канфігурацыя сеткі" #: standalone/net_monitor:104 #, c-format msgid "Global statistics" msgstr "" #: standalone/net_monitor:107 #, c-format msgid "Instantaneous" msgstr "" #: standalone/net_monitor:107 #, fuzzy, c-format msgid "Average" msgstr "Альтэрнатыўны" #: standalone/net_monitor:108 #, c-format msgid "" "Sending\n" "speed:" msgstr "" #: standalone/net_monitor:109 #, c-format msgid "" "Receiving\n" "speed:" msgstr "" #: standalone/net_monitor:113 #, fuzzy, c-format msgid "" "Connection\n" "time: " msgstr "Імя злучэння" #: standalone/net_monitor:120 #, c-format msgid "Use same scale for received and transmitted" msgstr "" #: standalone/net_monitor:139 #, c-format msgid "Wait please, testing your connection..." msgstr "" #: standalone/net_monitor:188 standalone/net_monitor:201 #, fuzzy, c-format msgid "Disconnecting from Internet " msgstr "Далучэнне да Інтэрнэту" #: standalone/net_monitor:188 standalone/net_monitor:201 #, fuzzy, c-format msgid "Connecting to Internet " msgstr "Далучэнне да Інтэрнэту" #: standalone/net_monitor:232 #, c-format msgid "Disconnection from Internet failed." msgstr "" #: standalone/net_monitor:233 #, c-format msgid "Disconnection from Internet complete." msgstr "" #: standalone/net_monitor:235 #, fuzzy, c-format msgid "Connection complete." msgstr "Імя злучэння" #: standalone/net_monitor:236 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandrakelinux Control Center." msgstr "" #: standalone/net_monitor:340 #, fuzzy, c-format msgid "Color configuration" msgstr "Канфігурацыя" #: standalone/net_monitor:388 standalone/net_monitor:408 #, fuzzy, c-format msgid "sent: " msgstr "Эсперанто:" #: standalone/net_monitor:395 standalone/net_monitor:412 #, c-format msgid "received: " msgstr "" #: standalone/net_monitor:402 #, c-format msgid "average" msgstr "" #: standalone/net_monitor:405 #, fuzzy, c-format msgid "Local measure" msgstr "Гульня ў косьці" #: standalone/net_monitor:466 #, c-format msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "" #: standalone/net_monitor:477 #, fuzzy, c-format msgid "No internet connection configured" msgstr "Сумеснае Інтэрнэт-злучэнне" #: standalone/printerdrake:68 #, fuzzy, c-format msgid "Reading data of installed printers..." msgstr "Стварэнне дыскеты для ўсталявання" #: standalone/printerdrake:116 #, fuzzy, c-format msgid "%s Printer Management Tool" msgstr "Мэнэджэр тэм" #: standalone/printerdrake:130 standalone/printerdrake:131 #: standalone/printerdrake:132 standalone/printerdrake:133 #: standalone/printerdrake:141 standalone/printerdrake:142 #: standalone/printerdrake:146 #, c-format msgid "/_Actions" msgstr "/_Дзеяньні" #: standalone/printerdrake:130 standalone/printerdrake:142 #, c-format msgid "/_Add Printer" msgstr "/_Дадаць друкарку" #: standalone/printerdrake:131 #, c-format msgid "/Set as _Default" msgstr "/Зрабіць _дапомным" #: standalone/printerdrake:132 #, c-format msgid "/_Edit" msgstr "/_Рэдагаваць" #: standalone/printerdrake:133 #, c-format msgid "/_Delete" msgstr "/_Выдаліць" #: standalone/printerdrake:134 #, c-format msgid "/_Expert mode" msgstr "" #: standalone/printerdrake:139 #, c-format msgid "/_Refresh" msgstr "/_Аднавіць" #: standalone/printerdrake:146 #, fuzzy, c-format msgid "/_Configure CUPS" msgstr "Настройка IDE" #: standalone/printerdrake:181 #, c-format msgid "Search:" msgstr "Шукаць:" #: standalone/printerdrake:184 #, c-format msgid "Apply filter" msgstr "Ужыць фільтар" #: standalone/printerdrake:211 standalone/printerdrake:218 #, c-format msgid "Def." msgstr "" #: standalone/printerdrake:211 standalone/printerdrake:218 #, c-format msgid "Printer Name" msgstr "Назва друкаркі" #: standalone/printerdrake:211 #, c-format msgid "Connection Type" msgstr "Тып далучэньня" #: standalone/printerdrake:218 #, fuzzy, c-format msgid "Server Name" msgstr "Сервак" #. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:226 #, fuzzy, c-format msgid "Add Printer" msgstr "Прынтэр" #: standalone/printerdrake:226 #, fuzzy, c-format msgid "Add a new printer to the system" msgstr "Дадаць карыстальніка ў сыстэму" #. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:229 #, c-format msgid "Set as default" msgstr "Усталяваць як дапомнае" #: standalone/printerdrake:229 #, c-format msgid "Set selected printer as the default printer" msgstr "" #: standalone/printerdrake:232 #, fuzzy, c-format msgid "Edit selected printer" msgstr "Рэдагаваць вылучаны радок" #: standalone/printerdrake:235 #, fuzzy, c-format msgid "Delete selected printer" msgstr "Выдаліць вылучаны радок" #: standalone/printerdrake:238 #, c-format msgid "Refresh the list" msgstr "Аднавіць сьпіс" #. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:241 #, fuzzy, c-format msgid "Configure CUPS" msgstr "Настройка IDE" #: standalone/printerdrake:241 #, fuzzy, c-format msgid "Configure CUPS printing system" msgstr "Настройка IDE" #: standalone/printerdrake:299 standalone/printerdrake:337 #, c-format msgid "Enabled" msgstr "Уключана" #: standalone/printerdrake:300 standalone/printerdrake:338 #, c-format msgid "Disabled" msgstr "Выключана" #: standalone/printerdrake:560 #, c-format msgid "Authors: " msgstr "Аўтары: " #. -PO: here %s is the version number #: standalone/printerdrake:570 #, fuzzy, c-format msgid "Printer Management %s" msgstr "Мэнэджэр файлаў" #: standalone/scannerdrake:51 #, c-format msgid "" "SANE packages need to be installed to use scanners.\n" "\n" "Do you want to install the SANE packages?" msgstr "" #: standalone/scannerdrake:55 #, c-format msgid "Aborting Scannerdrake." msgstr "" #: standalone/scannerdrake:60 #, c-format msgid "" "Could not install the packages needed to set up a scanner with Scannerdrake." msgstr "" #: standalone/scannerdrake:61 #, c-format msgid "Scannerdrake will not be started now." msgstr "" #: standalone/scannerdrake:67 standalone/scannerdrake:491 #, c-format msgid "Searching for configured scanners..." msgstr "" #: standalone/scannerdrake:71 standalone/scannerdrake:495 #, c-format msgid "Searching for new scanners..." msgstr "" #: standalone/scannerdrake:79 standalone/scannerdrake:517 #, c-format msgid "Re-generating list of configured scanners..." msgstr "" #: standalone/scannerdrake:101 #, c-format msgid "The %s is not supported by this version of %s." msgstr "" #: standalone/scannerdrake:104 #, c-format msgid "%s found on %s, configure it automatically?" msgstr "" #: standalone/scannerdrake:116 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "" #: standalone/scannerdrake:131 #, c-format msgid "Select a scanner model" msgstr "" #: standalone/scannerdrake:132 #, c-format msgid " (" msgstr " (" #: standalone/scannerdrake:133 #, c-format msgid "Detected model: %s" msgstr "" #: standalone/scannerdrake:136 #, c-format msgid "Port: %s" msgstr "Порт: %s" #: standalone/scannerdrake:138 standalone/scannerdrake:141 #, c-format msgid " (UNSUPPORTED)" msgstr "" #: standalone/scannerdrake:144 #, fuzzy, c-format msgid "The %s is not supported under Linux." msgstr "%s непадтрымліваецца гэтым дыялёгам\n" #: standalone/scannerdrake:171 standalone/scannerdrake:185 #, c-format msgid "Do not install firmware file" msgstr "" #: standalone/scannerdrake:175 standalone/scannerdrake:227 #, c-format msgid "" "It is possible that your %s needs its firmware to be uploaded everytime when " "it is turned on." msgstr "" #: standalone/scannerdrake:176 standalone/scannerdrake:228 #, c-format msgid "If this is the case, you can make this be done automatically." msgstr "" #: standalone/scannerdrake:177 standalone/scannerdrake:231 #, c-format msgid "" "To do so, you need to supply the firmware file for your scanner so that it " "can be installed." msgstr "" #: standalone/scannerdrake:178 standalone/scannerdrake:232 #, c-format msgid "" "You find the file on the CD or floppy coming with the scanner, on the " "manufacturer's home page, or on your Windows partition." msgstr "" #: standalone/scannerdrake:180 standalone/scannerdrake:239 #, c-format msgid "Install firmware file from" msgstr "" #: standalone/scannerdrake:200 #, fuzzy, c-format msgid "Select firmware file" msgstr "Абярыце файл" #: standalone/scannerdrake:203 standalone/scannerdrake:262 #, c-format msgid "The firmware file %s does not exist or is unreadable!" msgstr "" #: standalone/scannerdrake:226 #, c-format msgid "" "It is possible that your scanners need their firmware to be uploaded " "everytime when they are turned on." msgstr "" #: standalone/scannerdrake:230 #, c-format msgid "" "To do so, you need to supply the firmware files for your scanners so that it " "can be installed." msgstr "" #: standalone/scannerdrake:233 #, c-format msgid "" "If you have already installed your scanner's firmware you can update the " "firmware here by supplying the new firmware file." msgstr "" #: standalone/scannerdrake:235 #, c-format msgid "Install firmware for the" msgstr "" #: standalone/scannerdrake:258 #, fuzzy, c-format msgid "Select firmware file for the %s" msgstr "Усталяваць шрыфт для стальца" #: standalone/scannerdrake:276 #, fuzzy, c-format msgid "Could not install the firmware file for the %s!" msgstr "Усталяваць шрыфт для стальца" #: standalone/scannerdrake:289 #, c-format msgid "The firmware file for your %s was successfully installed." msgstr "" #: standalone/scannerdrake:299 #, c-format msgid "The %s is unsupported" msgstr "" #: standalone/scannerdrake:304 #, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the %s Control Center in Hardware section." msgstr "" #: standalone/scannerdrake:308 standalone/scannerdrake:315 #: standalone/scannerdrake:345 #, c-format msgid "Auto-detect available ports" msgstr "" #: standalone/scannerdrake:310 standalone/scannerdrake:356 #, c-format msgid "Please select the device where your %s is attached" msgstr "" #: standalone/scannerdrake:311 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "" #: standalone/scannerdrake:313 standalone/scannerdrake:358 #, fuzzy, c-format msgid "choose device" msgstr "Загрузачная прылада" #: standalone/scannerdrake:347 #, fuzzy, c-format msgid "Searching for scanners..." msgstr "Адшукаць файлы на дыску" #: standalone/scannerdrake:383 #, fuzzy, c-format msgid "Setting up kernel modules..." msgstr "Індыкатар гучнасьці" #: standalone/scannerdrake:390 standalone/scannerdrake:397 #, fuzzy, c-format msgid "Attention!" msgstr "Атракцыён" #: standalone/scannerdrake:391 #, c-format msgid "" "Your %s cannot be configured fully automatically.\n" "\n" "Manual adjustments are required. Please edit the configuration file /etc/" "sane.d/%s.conf. " msgstr "" #: standalone/scannerdrake:392 standalone/scannerdrake:401 #, c-format msgid "" "More info in the driver's manual page. Run the command \"man sane-%s\" to " "read it." msgstr "" #: standalone/scannerdrake:394 standalone/scannerdrake:403 #, c-format msgid "" "After that you may scan documents using \"XSane\" or \"Kooka\" from " "Multimedia/Graphics in the applications menu." msgstr "" #: standalone/scannerdrake:398 #, c-format msgid "" "Your %s has been configured, but it is possible that additional manual " "adjustments are needed to get it to work. " msgstr "" #: standalone/scannerdrake:399 #, c-format msgid "" "If it does not appear in the list of configured scanners in the main window " "of Scannerdrake or if it does not work correctly, " msgstr "" #: standalone/scannerdrake:400 #, c-format msgid "edit the configuration file /etc/sane.d/%s.conf. " msgstr "" #: standalone/scannerdrake:406 #, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/" "Graphics in the applications menu." msgstr "" #: standalone/scannerdrake:431 #, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "" #: standalone/scannerdrake:432 #, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "" #: standalone/scannerdrake:435 standalone/scannerdrake:438 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "" #: standalone/scannerdrake:452 #, fuzzy, c-format msgid "Search for new scanners" msgstr "Адшукаць файлы на дыску" #: standalone/scannerdrake:458 #, c-format msgid "Add a scanner manually" msgstr "" #: standalone/scannerdrake:465 #, c-format msgid "Install/Update firmware files" msgstr "" #: standalone/scannerdrake:471 #, fuzzy, c-format msgid "Scanner sharing" msgstr "Сан Марына" #: standalone/scannerdrake:530 standalone/scannerdrake:695 #, fuzzy, c-format msgid "All remote machines" msgstr "Мэнэджэр файлаў" #: standalone/scannerdrake:542 standalone/scannerdrake:845 #, c-format msgid "This machine" msgstr "" #: standalone/scannerdrake:582 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessible by remote machines and by which remote machines." msgstr "" #: standalone/scannerdrake:583 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" #: standalone/scannerdrake:586 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "" #: standalone/scannerdrake:588 #, c-format msgid "Scanner sharing to hosts: " msgstr "" #: standalone/scannerdrake:602 #, c-format msgid "Use scanners on remote computers" msgstr "" #: standalone/scannerdrake:605 #, c-format msgid "Use the scanners on hosts: " msgstr "" #: standalone/scannerdrake:632 standalone/scannerdrake:704 #: standalone/scannerdrake:854 #, c-format msgid "Sharing of local scanners" msgstr "" #: standalone/scannerdrake:633 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "" #: standalone/scannerdrake:644 standalone/scannerdrake:794 #, fuzzy, c-format msgid "Add host" msgstr "Дадаць карыстальніка" #: standalone/scannerdrake:650 standalone/scannerdrake:800 #, fuzzy, c-format msgid "Edit selected host" msgstr "Рэдагаваць вылучаны радок" #: standalone/scannerdrake:659 standalone/scannerdrake:809 #, fuzzy, c-format msgid "Remove selected host" msgstr "/Выдаліць/Выбранае" #: standalone/scannerdrake:683 standalone/scannerdrake:691 #: standalone/scannerdrake:696 standalone/scannerdrake:742 #: standalone/scannerdrake:833 standalone/scannerdrake:841 #: standalone/scannerdrake:846 standalone/scannerdrake:892 #, c-format msgid "Name/IP address of host:" msgstr "" #: standalone/scannerdrake:705 standalone/scannerdrake:855 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "" #: standalone/scannerdrake:716 standalone/scannerdrake:866 #, c-format msgid "You must enter a host name or an IP address.\n" msgstr "" #: standalone/scannerdrake:727 standalone/scannerdrake:877 #, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "" #: standalone/scannerdrake:782 #, fuzzy, c-format msgid "Usage of remote scanners" msgstr "Выкарыстоўваць незанятую прастору" #: standalone/scannerdrake:783 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "" #: standalone/scannerdrake:940 #, c-format msgid "" "saned needs to be installed to share the local scanner(s).\n" "\n" "Do you want to install the saned package?" msgstr "" #: standalone/scannerdrake:944 standalone/scannerdrake:948 #, c-format msgid "Your scanner(s) will not be available on the network." msgstr "" #: standalone/service_harddrake:104 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "" #: standalone/service_harddrake:105 #, c-format msgid "- %s was removed\n" msgstr "" #: standalone/service_harddrake:108 #, fuzzy, c-format msgid "Some devices were added: %s\n" msgstr "Мыш: %s\n" #: standalone/service_harddrake:109 #, c-format msgid "- %s was added\n" msgstr "" #: standalone/service_harddrake:204 #, c-format msgid "Hardware probing in progress" msgstr "" #: standalone/service_harddrake_confirm:7 #, c-format msgid "Hardware changes in \"%s\" class (%s seconds to answer)" msgstr "" #: standalone/service_harddrake_confirm:8 #, fuzzy, c-format msgid "Do you want to run the appropriate config tool?" msgstr "Ці жадаеце пратэсціраваць настройкі?" #: steps.pm:14 #, c-format msgid "Language" msgstr "Выбар мовы" #: steps.pm:15 #, fuzzy, c-format msgid "License" msgstr "Ліхтэнштайн" #: steps.pm:16 #, c-format msgid "Configure mouse" msgstr "Настройка мышы" #: steps.pm:17 #, c-format msgid "Hard drive detection" msgstr "Вызначэнне жорсткага дыску" #: steps.pm:18 #, c-format msgid "Select installation class" msgstr "Клас усталявання" #: steps.pm:19 #, c-format msgid "Choose your keyboard" msgstr "Выбар клавіятуры" #: steps.pm:21 #, fuzzy, c-format msgid "Partitioning" msgstr "Прынтэр" #: steps.pm:22 #, c-format msgid "Format partitions" msgstr "Фарматаванне раздзелаў" #: steps.pm:23 #, c-format msgid "Choose packages to install" msgstr "Выбар пакетаў" #: steps.pm:24 #, c-format msgid "Install system" msgstr "Усталяванне сістэмы" #: steps.pm:25 #, fuzzy, c-format msgid "Administrator password" msgstr "Пароль для root" #: steps.pm:26 #, c-format msgid "Add a user" msgstr "Дадаць карыстальніка" #: steps.pm:27 #, c-format msgid "Configure networking" msgstr "Настройка сеткі" #: steps.pm:28 #, c-format msgid "Install bootloader" msgstr "Усталяванне загрузчыку" #: steps.pm:29 #, c-format msgid "Configure X" msgstr "Настройка X Window" #: steps.pm:31 #, c-format msgid "Configure services" msgstr "Настройка службаў" #: steps.pm:32 #, fuzzy, c-format msgid "Install updates" msgstr "Усталяванне сістэмы" #: steps.pm:33 #, c-format msgid "Exit install" msgstr "Заканчэнне ўсталявання" #: ugtk2.pm:900 #, c-format msgid "Is this correct?" msgstr "Гэта дакладна?" #: ugtk2.pm:960 #, fuzzy, c-format msgid "No file chosen" msgstr "абіральнік файла" #: ugtk2.pm:962 #, fuzzy, c-format msgid "You have chosen a file, not a directory" msgstr "Няма такога файла ці тэчкі" #: ugtk2.pm:964 #, fuzzy, c-format msgid "You have chosen a directory, not a file" msgstr "Назва \"/\" можа быць толькі каталёгам, а ня ключом" #: ugtk2.pm:966 #, fuzzy, c-format msgid "No such directory" msgstr "Ня тэчка" #: ugtk2.pm:966 #, fuzzy, c-format msgid "No such file" msgstr "Няма гэткага ключа '%s'\n" #: ugtk2.pm:1045 #, c-format msgid "Expand Tree" msgstr "Разгарнуць дрэва" #: ugtk2.pm:1046 #, c-format msgid "Collapse Tree" msgstr "Згарнуць дрэва" #: ugtk2.pm:1047 #, c-format msgid "Toggle between flat and group sorted" msgstr "Пераключэнне паміж упарадкаваннем па групе і асобках" #: wizards.pm:95 #, c-format msgid "" "%s is not installed\n" "Click \"Next\" to install or \"Cancel\" to quit" msgstr "" #: wizards.pm:99 #, fuzzy, c-format msgid "Installation failed" msgstr "Усталяванне SILO" #, fuzzy #~ msgid "Get YP server from DHCP" #~ msgstr "IP сэервера SMB" #, fuzzy #~ msgid "Get NTPD server from DHCP" #~ msgstr "IP сэервера SMB" #, fuzzy #~ msgid "Upload the system configuration" #~ msgstr "Аднавіць канфігурацыю меню" #, fuzzy #~ msgid "Active Firewall : intrusion detected" #~ msgstr "Знойдзена сістэма сеткавай бяспекі (firewall)!" #, fuzzy #~ msgid "Do you want to blacklist the attacker ?" #~ msgstr "Вы жадаеце скончыць гульню?" #~ msgid "" #~ "Insert a floppy in drive\n" #~ "All data on this floppy will be lost" #~ msgstr "" #~ "Устаўце дыскету ў дыскавод\n" #~ "Усе дадзеныя на гэтай дыскеце будуць страчаны" #, fuzzy #~ msgid "Insert a FAT formatted floppy in drive %s" #~ msgstr "Устаўце дыскету ў дыскавод %s" #, fuzzy #~ msgid "Load/Save on floppy" #~ msgstr "Захаванне на дыскету" #, fuzzy #~ msgid "Load from floppy" #~ msgstr "Захаванне на дыскету" #~ msgid "Save on floppy" #~ msgstr "Захаванне на дыскету" #, fuzzy #~ msgid "Package selection" #~ msgstr "Выбар групы пакетаў" #, fuzzy #~ msgid "Loading from floppy" #~ msgstr "Захаванне на дыскету" #, fuzzy #~ msgid "Insert a floppy containing package selection" #~ msgstr "Асабісты выбар пакетаў" #~ msgid "Installing HPOJ package..." #~ msgstr "Усталяванне пакету HPOJ..." #, fuzzy #~ msgid "multi-function device" #~ msgstr "Рэжым раўнаньня" #, fuzzy #~ msgid "printing to %s" #~ msgstr "Памылка запісу ў файл %s" #, fuzzy #~ msgid "using command %s" #~ msgstr "Порт" #~ msgid "Installing HPLIP package..." #~ msgstr "Усталяванне пакету HPLIP..." #~ msgid "Root password" #~ msgstr "Пароль для root" #~ msgid "Move" #~ msgstr "Перанос" #~ msgid "Which disk do you want to move it to?" #~ msgstr "На які дыск перанесці?" #~ msgid "Sector" #~ msgstr "Сектар" #~ msgid "Which sector do you want to move it to?" #~ msgstr "На які сектар перанесці?" #~ msgid "Moving" #~ msgstr "Пераносім" #~ msgid "Moving partition..." #~ msgstr "Пераносіцца раздзел..." #~ msgid "Error opening %s for writing: %s" #~ msgstr "Памылка адкрыцця %s для запісу: %s" #~ msgid "OK" #~ msgstr "Так" #~ msgid "Czech (QWERTZ)" #~ msgstr "Чешскі (QWERTZ)" #~ msgid "German" #~ msgstr "Нямецкі" #~ msgid "Dvorak" #~ msgstr "Dvorak" #~ msgid "Spanish" #~ msgstr "Іспанскі" #~ msgid "Finnish" #~ msgstr "Фінскі" #~ msgid "French" #~ msgstr "Французскі" #~ msgid "Norwegian" #~ msgstr "Нарвежскі" #~ msgid "Polish" #~ msgstr "Польскі" #~ msgid "Russian" #~ msgstr "Рускі" #~ msgid "Swedish" #~ msgstr "Швецкі" #~ msgid "Armenian (old)" #~ msgstr "Армянскі (стары)" #~ msgid "Armenian (typewriter)" #~ msgstr "Армянскі (typewriter)" #~ msgid "Armenian (phonetic)" #~ msgstr "Армянскі (фанетычны)" #~ msgid "Azerbaidjani (latin)" #~ msgstr "Азербайджанскі (latin)" #~ msgid "Belgian" #~ msgstr "Бельгійскі" #~ msgid "Brazilian (ABNT-2)" #~ msgstr "Бразільскі (ABNT-2)" #~ msgid "Belarusian" #~ msgstr "Беларускі" #~ msgid "Swiss (German layout)" #~ msgstr "Швейцарскі (Нямецкая раскладка)" #~ msgid "Swiss (French layout)" #~ msgstr "Швейцарскі (Французская раскладка)" #~ msgid "Czech (QWERTY)" #~ msgstr "Чешскі (QWERTY)" #~ msgid "German (no dead keys)" #~ msgstr "Нямецкі (няма заблакіраваных клавіш)" #~ msgid "Danish" #~ msgstr "Дацкі" #~ msgid "Dvorak (US)" #~ msgstr "Dvorak (US)" #~ msgid "Dvorak (Norwegian)" #~ msgstr "Dvorak (Нарвежскі)" #~ msgid "Estonian" #~ msgstr "Эстонскі" #~ msgid "Georgian (\"Russian\" layout)" #~ msgstr "Грузінскі (\"Руская\" раскладка)" #~ msgid "Georgian (\"Latin\" layout)" #~ msgstr "Грузінскі (\"Лацінская\" раскладка)" #~ msgid "Greek" #~ msgstr "Грэчаскі" #~ msgid "Hungarian" #~ msgstr "Мадьярскі" #~ msgid "Croatian" #~ msgstr "Харвацкі" #~ msgid "Israeli" #~ msgstr "Іўрыт" #~ msgid "Israeli (Phonetic)" #~ msgstr "Іўрыт (фанетычны)" #~ msgid "Iranian" #~ msgstr "Іранскі" #~ msgid "Icelandic" #~ msgstr "Ісландскі" #~ msgid "Italian" #~ msgstr "Італьянскі" #~ msgid "Japanese 106 keys" #~ msgstr "Японскі 106 клавіш" #~ msgid "Latin American" #~ msgstr "Лаціна-Амерыканскі" #~ msgid "Lithuanian AZERTY (old)" #~ msgstr "Літоўскі AZERTY (стары)" #~ msgid "Lithuanian AZERTY (new)" #~ msgstr "Літоўскі AZERTY (новы)" #~ msgid "Lithuanian \"number row\" QWERTY" #~ msgstr "Літоўскі \"нумар радка\" QWERTY" #~ msgid "Lithuanian \"phonetic\" QWERTY" #~ msgstr "Літоўскі \"фанетычны\" QWERTY" #~ msgid "Dutch" #~ msgstr "Галандскі" #~ msgid "Polish (qwerty layout)" #~ msgstr "Польскі (стандартная раскладка)" #~ msgid "Polish (qwertz layout)" #~ msgstr "Польскі (qwertz раскладка)" #~ msgid "Portuguese" #~ msgstr "Партугальскі" #~ msgid "Canadian (Quebec)" #~ msgstr "Канадскі (Квебэк)" #~ msgid "Russian (Phonetic)" #~ msgstr "Рускі (фанетычны)" #~ msgid "Slovenian" #~ msgstr "Славенскі" #~ msgid "Slovakian (QWERTZ)" #~ msgstr "Славацкі (QWERTZ)" #~ msgid "Slovakian (QWERTY)" #~ msgstr "Славацкі (QWERTY)" #~ msgid "Thai keyboard" #~ msgstr "Тайская клавіятура" #~ msgid "Turkish (traditional \"F\" model)" #~ msgstr "Турэцкі (традыцыёная \"F\" мадэль)" #~ msgid "Turkish (modern \"Q\" model)" #~ msgstr "Турэцкі (сучасная \"Q\" мадэль)" #~ msgid "Ukrainian" #~ msgstr "Украінскі" #~ msgid "Vietnamese \"numeric row\" QWERTY" #~ msgstr "Вьетнамскі \"нумар радка\" QWERTY" #~ msgid "Enable multiple profiles" #~ msgstr "Даступна шмат профіляў" #~ msgid "" #~ "You may now provide options to module %s.\n" #~ "Options are in format ``name=value name2=value2...''.\n" #~ "For instance, ``io=0x300 irq=7''" #~ msgstr "" #~ "Вы не можаце задаць опцыі модулю %s.\n" #~ "Опцыі - у фармаце ‟імя=значэнне імя2=значэнне2 ...”.\n" #~ "Напрыклад, ‟io=0x300 irq=7”" #~ msgid "Installation of %s failed. The following error occurred:" #~ msgstr "Усталяванне %s не атрымалася. Узнікла наступная памылка:" #~ msgid "/dev/hda" #~ msgstr "/dev/hda" #~ msgid "/dev/hdb" #~ msgstr "/dev/hdb" #~ msgid "/dev/fd0" #~ msgstr "/dev/fd0" #~ msgid "" #~ "Please choose which network adapter you want to use to connect to " #~ "Internet." #~ msgstr "" #~ "Калі ласка, пазначце сеткавы адаптар, які плануеце выкарыстоўваць для " #~ "далучэння да інтэрнэт" #~ msgid "chunk size" #~ msgstr "памер блоку" #~ msgid "Chunk size %s\n" #~ msgstr "Памер фрагменту %s\n" #~ msgid "Can not add a partition to _formatted_ RAID md%d" #~ msgstr "Не атрымліваецца дадаць раздзел на _адфармаціраваны_ RAID md%d" #~ msgid "mkraid failed (maybe raidtools are missing?)" #~ msgstr "mkraid не працаздольны (можа raid прылады адсутнічаюць?)" #~ msgid "mkraid failed" #~ msgstr "mkraid не працаздольны" #~ msgid "SILO Installation" #~ msgstr "Усталяванне SILO" #~ msgid "First sector of boot partition" #~ msgstr "Першы сектар загрузачнага раздзелу" #~ msgid "Bootloader installation" #~ msgstr "Усталяванне загрузчыку" #~ msgid "SILO" #~ msgstr "SILO" #~ msgid "" #~ "Your card can have 3D hardware acceleration support but only with Xorg %" #~ "s.\n" #~ "Your card is supported by Xorg %s which may have a better support in 2D." #~ msgstr "" #~ "Падтрымка 3D-паскарэння ў Вашай відэакарце выканана толькі ў Xorg %s.\n" #~ "Xorg %s можа выкарыстоўваць толькі 2D-паскарэнне для гэтай відэакарты." #~ msgid "" #~ "Your card can have 3D hardware acceleration support but only with Xorg %" #~ "s,\n" #~ "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" #~ "Your card is supported by Xorg %s which may have a better support in 2D." #~ msgstr "" #~ "Ваша відэакарта можа мець 3D-паскарэнне, якое падтрымліваецца толькі Xorg " #~ "%s.\n" #~ "МАЙЦЕ НА ЎВАЗЕ, ШТО ГЭТА ЭКСПЕРЫМЕНТАЛЬНАЯ ПАДТРЫМКА І МОЖА ПРЫВЕСЦІ ДА\n" #~ "ЗАВІСАННЯ ВАШАГА КАМП'ЮТЭРУ. Ваша відэакарта падтрымліваецца Xorg %s, " #~ "які\n" #~ "лепей падтрымлівае карты з 2D-паскарэннем." #~ msgid "4 billion colors (32 bits)" #~ msgstr "4 міліярда колераў (24 біты)" #~ msgid "XFree86 server: %s\n" #~ msgstr "Сервер XFree86: %s\n"