# SOME DESCRIPTIVE TITLE. # Copyright (C) 2000 Free Software Foundation, Inc. # Copyright (c) 2000 MandrakeSoft # Vasif Ismailoglu MD , 2000-2001 # msgid "" msgstr "" "Project-Id-Version: DrakX\n" "POT-Creation-Date: 2003-03-07 03:05+0100\n" "PO-Revision-Date: 2001-09-01 22:26GMT +0200\n" "Last-Translator: Vasif İsmayıloğlu MD \n" "Language-Team: Azerbaijani Turkish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 0.8\n" #: ../../any.pm:1 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" #: ../../any.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../interactive.pm:1 #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 #: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1 #: ../../standalone/drakbackup:1 ../../standalone/drakboot:1 #: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 #: ../../standalone/drakfont:1 ../../standalone/drakgw:1 #: ../../standalone/draksec:1 ../../standalone/logdrake:1 #: ../../standalone/net_monitor:1 #, c-format msgid "Cancel" msgstr "Ləğv et" #: ../../any.pm:1 #, c-format msgid "Launch userdrake" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, c-format msgid "Mandatory package %s is missing" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, fuzzy, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "" "Bu paket yenilənməlidir\n" "Sistemdən çıxarmaq mövzusunda ciddisiniz?" #: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Custom" msgstr "Xüsusi" #: ../../any.pm:1 #, fuzzy, c-format msgid "Allow all users" msgstr "İstifadəçi əlavə et" #: ../../any.pm:1 #, fuzzy, c-format msgid "No sharing" msgstr "CUPS başlayır" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/interactive.pm:1 #, c-format msgid "More" msgstr "Daha Çox" #: ../../any.pm:1 #, fuzzy, c-format msgid "Here is the full list of available countries" msgstr "Bütün mövcud klaviaturaların siyahısı" #: ../../any.pm:1 #, fuzzy, c-format msgid "Please choose your country." msgstr "Xahiş edirik siçanınızın növünü seçin." #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Country" msgstr "Ölkə:" #: ../../any.pm:1 #, fuzzy, c-format msgid "All languages" msgstr "İşlətdiyiniz dili seçin" #: ../../any.pm:1 #, c-format msgid "Use Unicode by default" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Mandrake Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "Qurulumdan sonra istifadə edə biləcəyiniz başqa dillər seçə bilərsiniz" #: ../../any.pm:1 #, fuzzy, c-format msgid "Please choose a language to use." msgstr "Xahiş edirik istifadə üçün bir dil seçin." #: ../../any.pm:1 #, c-format msgid "Choose the window manager to run:" msgstr "İstifadə etmək istədiyiniz pəncərə idarəçisini seçin:" #: ../../any.pm:1 #, c-format msgid "Choose the default user:" msgstr "Əsas istifadəçini seçin:" #: ../../any.pm:1 #, fuzzy, c-format msgid "Do you want to use this feature?" msgstr "aboot istifadə etmək istəyirsiniz?" #: ../../any.pm:1 #, fuzzy, c-format msgid "I can set up your computer to automatically log on one user." msgstr "" "Kompüterinizi avtomatik olaraq bir istifadəçi ilə başlada bilərəm.\n" "İstəmirsiniz isə rədd edin." #: ../../any.pm:1 #, c-format msgid "Autologin" msgstr "Avtomatik Giriş" #: ../../any.pm:1 #, c-format msgid "Icon" msgstr "Timsal" #: ../../any.pm:1 #, c-format msgid "Shell" msgstr "Qabıq" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Password (again)" msgstr "Parol (təkrar)" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakconnect:1 #, c-format msgid "Password" msgstr "Parol" #: ../../any.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "User name" msgstr "İstifadəçi adı" #: ../../any.pm:1 #, c-format msgid "Real name" msgstr "Həqiqi adı" #: ../../any.pm:1 #, c-format msgid "Accept user" msgstr "İstifadəçini qəbul et" #: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1 #, c-format msgid "Done" msgstr "Qurtardı" #: ../../any.pm:1 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Bir istifadəçi girin\n" "%s" #: ../../any.pm:1 #, c-format msgid "Add user" msgstr "İstifadəçini əlavə et" #: ../../any.pm:1 #, c-format msgid "This user name has already been added" msgstr "Bu istifadəçi adı artıq vardır" #: ../../any.pm:1 #, fuzzy, c-format msgid "The user name is too long" msgstr "Bu istifadəçi adı artıq vardır" #: ../../any.pm:1 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" "İstifadəçi adında sadacə kiçik hərflər, rəqəmlər, `-' və `_' xarakterləri " "ola bilər" #: ../../any.pm:1 #, c-format msgid "Please give a user name" msgstr "Xahiş edirik bir istifadəçi adı alın" #: ../../any.pm:1 #, c-format msgid "This password is too simple" msgstr "Zəif parol seçdiniz!" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Please try again" msgstr "Xahiş edirik təkrar sınayın" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "The passwords do not match" msgstr "Parollar uyğun gəlmir" #: ../../any.pm:1 #, c-format msgid "(already added %s)" msgstr "(%s artıq əlavə edilmişdir)" #: ../../any.pm:1 #, c-format msgid "access to compilation tools" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to network tools" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to administrative files" msgstr "" #: ../../any.pm:1 #, c-format msgid "allow \"su\"" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to rpm tools" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to X programs" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "Buradakı bir birindən fərqli seçənəklərə yenilərini əlavə edə bilər,\n" "ya da mövcud olanları dəyişdirə bilərsiniz." #: ../../any.pm:1 #, c-format msgid "Other OS (windows...)" msgstr "Digər sistemlər (windows...)" #: ../../any.pm:1 #, c-format msgid "Other OS (MacOS...)" msgstr "Digər sistemlər (MacOS...)" #: ../../any.pm:1 #, c-format msgid "Other OS (SunOS...)" msgstr "Digər sistemlər (SunOS...)" #: ../../any.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Linux" msgstr "Linuks" #: ../../any.pm:1 #, c-format msgid "Which type of entry do you want to add?" msgstr "Ne cür bir giriş istəyirsiniz?" #: ../../any.pm:1 #, c-format msgid "This label is already used" msgstr "Bu etiket istifadə edilməz" #: ../../any.pm:1 #, fuzzy, c-format msgid "You must specify a root partition" msgstr "Bir swap sahəsinə ehtiyacınız var" #: ../../any.pm:1 #, c-format msgid "You must specify a kernel image" msgstr "" #: ../../any.pm:1 #, c-format msgid "Empty label not allowed" msgstr "Boş etiket qəbul edilə bilməz" #: ../../any.pm:1 ../../harddrake/v4l.pm:1 #, c-format msgid "Default" msgstr "Əsas" #: ../../any.pm:1 #, c-format msgid "NoVideo" msgstr "NoVİdeo" #: ../../any.pm:1 #, c-format msgid "Initrd-size" msgstr "Initrd böyüklüyü" #: ../../any.pm:1 #, c-format msgid "Append" msgstr "Sonuna əlavə et" #: ../../any.pm:1 #, c-format msgid "Label" msgstr "Etiket" #: ../../any.pm:1 #, c-format msgid "Unsafe" msgstr "E'tibarsız" #: ../../any.pm:1 #, c-format msgid "Table" msgstr "Cədvəl" #: ../../any.pm:1 #, c-format msgid "Root" msgstr "Kök" #: ../../any.pm:1 #, c-format msgid "Read-write" msgstr "Oxu-yaz" #: ../../any.pm:1 #, c-format msgid "Initrd" msgstr "Initrd" #: ../../any.pm:1 #, c-format msgid "Video mode" msgstr "Ekran modu" #: ../../any.pm:1 #, c-format msgid "Image" msgstr "Əks" #: ../../any.pm:1 #, c-format msgid "Default OS?" msgstr "Əsas OS" #: ../../any.pm:1 #, c-format msgid "Enable OF Boot?" msgstr "OF Açılışı Fəallaşdırım?" #: ../../any.pm:1 #, c-format msgid "Enable CD Boot?" msgstr "CDdən Açılışı Fəallaşdırım?" #: ../../any.pm:1 #, c-format msgid "Kernel Boot Timeout" msgstr "Çəkirdək Açılışı Vaxt Dolması" #: ../../any.pm:1 #, c-format msgid "Open Firmware Delay" msgstr "Firmware Gecikməsini Aç" #: ../../any.pm:1 #, c-format msgid "Boot device" msgstr "Açılış avadanlığı" #: ../../any.pm:1 #, c-format msgid "Init Message" msgstr "İnit İsmarıcı" #: ../../any.pm:1 #, c-format msgid "Bootloader to use" msgstr "İstifadə ediləcək Açılış idarəcisi" #: ../../any.pm:1 #, c-format msgid "Bootloader main options" msgstr "Sistem yükləyicisi ana seçənəkləri" #: ../../any.pm:1 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" "``Əmr sətiri seçənəklərini məhdudlaşdır`` seçənəyi parolsuz bir işə yaramaz" #: ../../any.pm:1 #, c-format msgid "Give the ram size in MB" msgstr "Yaddaş miqdarını Mb cinsindən verin" #: ../../any.pm:1 #, c-format msgid "Enable multiple profiles" msgstr "Birdən artıq profilə icazə ver" #: ../../any.pm:1 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Ümumi yaddaş miqdarı (%d MB tapıldı)" #: ../../any.pm:1 #, c-format msgid "Clean /tmp at each boot" msgstr "/tmp-i hər açılışda təmizlə" #: ../../any.pm:1 #, c-format msgid "Create a bootdisk" msgstr "Açılış disketi yarat" #: ../../any.pm:1 #, c-format msgid "restrict" msgstr "məhdudlaşdır" #: ../../any.pm:1 #, c-format msgid "Restrict command line options" msgstr "Əmr sətiri seçənəklərini məhdudlaşdır" #: ../../any.pm:1 #, c-format msgid "Force No APIC" msgstr "" #: ../../any.pm:1 #, fuzzy, c-format msgid "Enable ACPI" msgstr "CDdən Açılışı Fəallaşdırım?" #: ../../any.pm:1 #, c-format msgid "Delay before booting default image" msgstr "Açılışda gecikmə müddəti" #: ../../any.pm:1 #, c-format msgid "compact" msgstr "bəsit" #: ../../any.pm:1 #, c-format msgid "Compact" msgstr "Bəsit" #: ../../any.pm:1 #, c-format msgid "Bootloader installation" msgstr "Açılış yükləyici quruluşu" #: ../../any.pm:1 #, c-format msgid "First sector of boot partition" msgstr "Açılış qisminin ilk sektoru" #: ../../any.pm:1 #, c-format msgid "First sector of drive (MBR)" msgstr "Diskin ilk sektoru (MBR)" #: ../../any.pm:1 #, c-format msgid "Where do you want to install the bootloader?" msgstr "Sistem yükləyicisini haraya qurmaq istəyirsiniz?" #: ../../any.pm:1 #, c-format msgid "LILO/grub Installation" msgstr "LILO/grup Qurulumu" #: ../../any.pm:1 #, c-format msgid "SILO Installation" msgstr "SILO Qurulumu" #: ../../any.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Skip" msgstr "Nəzərə Alma" #: ../../any.pm:1 #, fuzzy, c-format msgid "On Floppy" msgstr "Disketə qeyd et" #: ../../any.pm:1 #, fuzzy, c-format msgid "First sector of the root partition" msgstr "Açılış qisminin ilk sektoru" #: ../../any.pm:1 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" #: ../../any.pm:1 #, c-format msgid "Creating bootdisk..." msgstr "Açılış disketi yaradılır" #: ../../any.pm:1 #, fuzzy, c-format msgid "Insert a floppy in %s" msgstr "%s sürücüsünə bir disket taxın" #: ../../any.pm:1 #, c-format msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "Açılış disketi yaratmaq üçün istifadə ediləcək disket sürücüyü seçin" #: ../../any.pm:1 #, c-format msgid "Second floppy drive" msgstr "İkinci disket sürücü" #: ../../any.pm:1 #, c-format msgid "First floppy drive" msgstr "İlk disket sürücü" #: ../../any.pm:1 #, c-format msgid "Sorry, no floppy drive available" msgstr "Bağışlayın, disket sürücü yoxdur" #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?\n" "%s" msgstr "" "Xüsusi bir açılış disketi, Linuks sisteminizin normal bir sistem yükləyiciyə " "lüzüm\n" "olmadan açılmasına imkan verər. Əgə sisteminizə lilo (ya da grub) " "qurmayacaqsanız,\n" "ya da başqa bir əməliyyat sistemi liloyu silərsa ya da lilo " "avadanlığınızlaişləməzsə\n" "bu disket sizə yardımçi olacaqdır. Sonradan Mandrake qurtarma disketi " "rəsmini\n" "istifadə edərək də bu disket yaradıla bilər.\n" "Açılış disketi yaratmaq istəyirsiniz?\n" "Açılış disketi yaratmaq istəyirsinizsə, birinci disket sürücüyədisklet " "yerləşdirin\n" "və \"OLDU\" basın.\n" "%s" #: ../../any.pm:1 #, c-format msgid "" "\n" "\n" "(WARNING! You're using XFS for your root partition,\n" "creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" "because XFS needs a very large driver)." msgstr "" #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" "Xüsusi bir açılış disketi, Linuks sisteminizin normal bir sistem yükləyiciyə " "lüzüm\n" "olmadan açılmasına imkan verər. Əgə sisteminizə lilo (ya da grub) " "qurmayacaqsanız,\n" "ya da başqa bir əməliyyat sistemi liloyu silərsa ya da lilo " "avadanlığınızlaişləməzsə\n" "bu disket sizə yardımçi olacaqdır. Sonradan Mandrake qurtarma disketi " "rəsmini\n" "istifadə edərək də bu disket yaradıla bilər.\n" "Açılış disketi yaratmaq istəyirsiniz?\n" "Açılış disketi yaratmaq istəyirsinizsə, birinci disket sürücüyə disket " "yerləşdirin\n" "və \"OLDU\" basın." #: ../../bootloader.pm:1 #, fuzzy, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "Sistem yükləyicisini haraya qurmaq istəyirsiniz?" #: ../../bootloader.pm:1 #, c-format msgid "not enough room in /boot" msgstr "/boot içində lazımi yer yoxdur" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "Isaretli secenek %d saniye icinde sistemi acacaq." # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "commands before booting, or 'c' for a command-line." msgstr "" "acilisdan evvel emrleri duzeltmək ucun 'e', emr setiri ucun ise 'c' basin" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "Sistemi secili emeliyyat sistemiyle acmaq ucun entere," # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "%c ve %c duymeleri ile isıqlandırılmıs girisleri sece bilersiniz" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Welcome to GRUB the operating system chooser!" msgstr "Emeliyyat sistemi secici GRUB'a xos gəlmissiniz!" #: ../../bootloader.pm:1 #, c-format msgid "Yaboot" msgstr "Yaboot" #: ../../bootloader.pm:1 #, c-format msgid "Grub" msgstr "Grub" #: ../../bootloader.pm:1 #, c-format msgid "LILO with text menu" msgstr "Mətn menyulu LILO" #: ../../bootloader.pm:1 #, c-format msgid "LILO with graphical menu" msgstr "Qrafiki menyulu LILO" #: ../../bootloader.pm:1 #, c-format msgid "SILO" msgstr "SILO" # NOTE: this message will be displayed at boot time; that is # only the ascii charset will be available on most machines # so use only 7bit for this message (and do transliteration or # leave it in English, as it is the best for your language) # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm:1 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" "%s emeliyyat sistemi secki proqramina xos gəlmissiniz!\n" "\n" "Içlerinden birini acmaq ucun adini yazin ve \n" "duymesine basin ve ya esas acilis ucun %d saniye gozleyin.\n" "\n" #: ../../common.pm:1 #, c-format msgid "consolehelper missing" msgstr "" #: ../../common.pm:1 #, c-format msgid "kdesu missing" msgstr "kdesu əksikdir" #: ../../common.pm:1 #, fuzzy, c-format msgid "Screenshots will be available after install in %s" msgstr "Qurulumdan sonra istifadə edə biləcəyiniz başqa dillər seçə bilərsiniz" #: ../../common.pm:1 #, fuzzy, c-format msgid "Can't make screenshots before partitioning" msgstr "Artıq bölmə əlavə edilə bilməz" #: ../../common.pm:1 #, fuzzy, c-format msgid "%d seconds" msgstr "%d saniyə sonra çıxılacaq" #: ../../common.pm:1 #, c-format msgid "1 minute" msgstr "" #: ../../common.pm:1 #, c-format msgid "%d minutes" msgstr "" #: ../../common.pm:1 #, c-format msgid "TB" msgstr "" #: ../../common.pm:1 #, c-format msgid "GB" msgstr "" #: ../../common.pm:1 #, c-format msgid "MB" msgstr "MB" #: ../../common.pm:1 #, c-format msgid "KB" msgstr "" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "United States" msgstr "Birləşmiş Ştatlar" #: ../../crypto.pm:1 ../../lang.pm:1 #, fuzzy, c-format msgid "Austria" msgstr "serial" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #: ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "Italy" msgstr "İtalyanca" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "Netherlands" msgstr "Hollandiya" #: ../../crypto.pm:1 ../../lang.pm:1 #, fuzzy, c-format msgid "Sweden" msgstr "İsveçcə" #: ../../crypto.pm:1 ../../lang.pm:1 #, fuzzy, c-format msgid "Norway" msgstr "Norveçcə" #: ../../crypto.pm:1 ../../lang.pm:1 #, fuzzy, c-format msgid "Greece" msgstr "Yunanca" #: ../../crypto.pm:1 ../../lang.pm:1 #, fuzzy, c-format msgid "Germany" msgstr "Almanca" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Czech Republic" msgstr "Çex Respublikası" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, fuzzy, c-format msgid "Belgium" msgstr "Belçika dili" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, fuzzy, c-format msgid "France" msgstr "Fransızca" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Costa Rica" msgstr "Kosta Rika" #: ../../fsedit.pm:1 #, c-format msgid "Error opening %s for writing: %s" msgstr "Yazmaq üçün açılan %s'də xəta: %s" #: ../../fsedit.pm:1 #, c-format msgid "Nothing to do" msgstr "" #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "Not enough free space for auto-allocating" msgstr "Avtomatik yerləşdirmə üçün boş sahə yoxdur" #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr "%s üçün LVM Məntiqi Cildini istifadə edə bilməzsiniz" #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "Bu bağlama nöqtəsi üçün həqiqi bir fayl sisteminə (ext2, reisrfs)\n" "ehtiyac vardır.\n" #: ../../fsedit.pm:1 #, c-format msgid "This directory should remain within the root filesystem" msgstr "Bu qovluq kök fayl sistemi içərisində olmalıdır" #: ../../fsedit.pm:1 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "%s üçün LVM Məntiqi Cildini istifadə edə bilməzsiniz" #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "Bir proqram tə'minatlı RAID bölməsini kök qovluğu (/) olaraq tə'yin " "etdiniz.\n" "Əgər lilo ya da grub istifadə etmək istəyirsinizsə, bir /boot bölməsi\n" "əlavə etməyi unutmayın" #: ../../fsedit.pm:1 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "Onsuz da bağlama nöqtəsi %s olan bir bölmə var\n" #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "Çap edici adı təkcə hərf, rəqəm və alt xətt daxil edə bilər" #: ../../fsedit.pm:1 #, c-format msgid "Mount points must begin with a leading /" msgstr "Bağlama nöqtələri / ilə başlamalıdır" #: ../../fsedit.pm:1 #, c-format msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "32MB dən kiçik disk bölmələrində ReiserFS istifadə etməlisiniz" #: ../../fsedit.pm:1 #, c-format msgid "You can't use JFS for partitions smaller than 16MB" msgstr "16MB dən kiçik disk bölmələrində JFS istifadə etməlisiniz" #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "" "I can't read the partition table of device %s, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to loose all the partitions?\n" msgstr "" "Bölmə cədvəlinizi oxuya bilmirəm, dəyəsən biraz xarab olub:-(\n" "Xarab olmuş bolmələri düzəltməyə çalışacam.\n" "Amma bütün mə'lumatlar itəcəkdir.\n" "Başqa bir yol isə DrakXin bölmə cədvəllərini yoxlamasını " "passivləşdirməkdir.\n" "(xəta %s)\n" "\n" "Bütün bölmələri itirmək istəyirsiniz?\n" #: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1 #: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 #: ../../standalone/drakboot:1 ../../standalone/draksplash:1 #, c-format msgid "Error" msgstr "Xəta" #: ../../fsedit.pm:1 #, c-format msgid "server" msgstr "verici" #: ../../fsedit.pm:1 #, c-format msgid "with /usr" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "simple" msgstr "bəsit" #: ../../fs.pm:1 #, fuzzy, c-format msgid "Enabling swap partition %s" msgstr "Şəkilləndirilən bölmə: %s" #: ../../fs.pm:1 ../../partition_table.pm:1 #, c-format msgid "error unmounting %s: %s" msgstr "%s ayrılırkən xəta oldu: %s" #: ../../fs.pm:1 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "" #: ../../fs.pm:1 #, fuzzy, c-format msgid "Mounting partition %s" msgstr "Şəkilləndirilən bölmə: %s" #: ../../fs.pm:1 #, fuzzy, c-format msgid "Checking %s" msgstr "Rezolyusiya: %s\n" #: ../../fs.pm:1 #, c-format msgid "Formatting partition %s" msgstr "Şəkilləndirilən bölmə: %s" #: ../../fs.pm:1 #, c-format msgid "Creating and formatting file %s" msgstr "%s faylı yaradılır və şəkilləndirilir" #: ../../fs.pm:1 #, c-format msgid "I don't know how to format %s in type %s" msgstr "%s'i necə şəkilləndirəcəyimi bilmirəm (Növ: %s)" #: ../../fs.pm:1 #, c-format msgid "%s formatting of %s failed" msgstr "%s şəkilləndirilməsində %s bölmə xətası" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Click on \"Next ->\" if you want to delete all data and partitions present\n" "on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n" "be able to recover any data and partitions present on this hard drive,\n" "including any Windows data.\n" "\n" "Click on \"<- Previous\" to stop this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" "Sürücüdəki bütün bilgiləri və bölmələri silmək üçün\n" "\"Oldu\" düyməsinə basın. Diqqətli olun,\"Oldu\" düyməsinə basdıqdan sonra\n" "Windows bilgiləri də daxil olmaq üzərəbütün bölmə mə'lumatı geri dönməyəcək " "şəkildə silinəcək.\n" "\n" "\n" "Bölmədəki mə'lumatları qoruyaraq \"Ləğv et\" düyməsinə\n" "əməliyyatı ləğv edə bilərsiniz." #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data present on it will be lost\n" "and will not be recoverable!" msgstr "" "Linuks Mandrakeni yükləmak üçün sürücüyü seçin.\n" "Diqqətli olun, sürücüdəki bütün mə'lumatlar silinəcək\n" "və geri gəlməyəcək." #: ../../help.pm:1 #, c-format msgid "" "As a review, DrakX will present a summary of various information it has\n" "about your system. Depending on your installed hardware, you may have some\n" "or all of the following entries. Each entry is made up of the configuration\n" "item to be configured, followed by a quick summary of the current\n" "configuration. Click on the corresponding \"Configure\" button to change\n" "that.\n" "\n" " * \"Keyboard\": check the current keyboard map configuration and change\n" "that if necessary.\n" "\n" " * \"Country\": check the current country selection. If you are not in this\n" "country, click on the \"Configure\" button and choose another one. If your\n" "country is not in the first list shown, click the \"More\" button to get\n" "the complete country list.\n" "\n" " * \"Timezone\": By default, DrakX deduces your time zone based on the\n" "country you have chosen. You can click on the \"Configure\" button here if\n" "this is not correct.\n" "\n" " * \"Mouse\": check the current mouse configuration and click on the button\n" "to change it if necessary.\n" "\n" " * \"Printer\": clicking on the \"Configure\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used during installation.\n" "\n" " * \"Sound card\": if a sound card is detected on your system, it is\n" "displayed here. If you notice the sound card displayed is not the one that\n" "is actually present on your system, you can click on the button and choose\n" "another driver.\n" "\n" " * \"Graphical Interface\": by default, DrakX configures your graphical\n" "interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n" "you, click on \"Configure\" to reconfigure your graphical interface.\n" "\n" " * \"TV card\": if a TV card is detected on your system, it is displayed\n" "here. If you have a TV card and it is not detected, click on \"Configure\"\n" "to try to configure it manually.\n" "\n" " * \"ISDN card\": if an ISDN card is detected on your system, it will be\n" "displayed here. You can click on \"Configure\" to change the parameters\n" "associated with the card.\n" "\n" " * \"Network\": If you want to configure your Internet or local network\n" "access now.\n" "\n" " * \"Security Level\": this entry offers you to redefine the security level\n" "as set in a previous step ().\n" "\n" " * \"Firewall\": if you plan to connect your machine to the Internet, it's\n" "a good idea to protect you from intrusions by setting up a firewall.\n" "Consult the corresponding section of the ``Starter Guide'' for details\n" "about firewall settings.\n" "\n" " * \"Bootloader\": if you wish to change your bootloader configuration,\n" "click that button. This should be reserved to advanced users.\n" "\n" " * \"Services\": you'll be able here to control finely which services will\n" "be run on your machine. If you plan to use this machine as a server it's a\n" "good idea to review this setup." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "\"Sound card\": if a sound card is detected on your system, it is displayed\n" "here. If you notice the sound card displayed is not the one that is\n" "actually present on your system, you can click on the button and choose\n" "another driver." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n" "boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n" "detected and installed in the bootloader menu. If this is not the case, you\n" "can add an entry by hand in this screen. Be careful to choose the correct\n" "parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt.\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information.\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second before your\n" "default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt.\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt.\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" "Yaboot NewWorld MacIntosh avadalığı üçün açılış idarəcisidir. Ayrıca\n" "GNU/Linuks, MacOS, və ya MacOSX sistemlərini kompüterinizdə varsa, " "açacaqdır.\n" "Normalda, bu əməliyyat sistemləri düzgün tapılıb qurula bilirlər\n" "Əgər belə olmazsa, bu ekrandan əllə lazımi qurğuları girə bilərsiniz.\n" "Düzgün parametrləri girib girmədiyinizi yaxşıca bir yoxlayın.\n" "\n" "\n" "Yaboot ana seçənəkləri:\n" "\n" "\n" " - Başlanğıc İsmarıcı: Açılışdan əvvəl çıxan sadə bir ismarıc.\n" "\n" "\n" " - Açılış Avadanlığı: GNU/Linuksu hardan başlatmaq istədiyinizi bildirir." "Ümumiyyətlə bu mə'lumatı daha əvvəl \"bootstrap\" quraşdırılması " "sırasındabildirmiş olacaqsınız.\n" "\n" "\n" " - Açıq Firmware Gecikməsi: LILOdan fərqli olaraq, yabootda iki dənə " "gecikmə vardır\n" "Birinci gecikmə saniyələrlə ölçülür və bu arada siz\n" "CD, OF açılışı, MacOS və ya Linuks arasında seçki aparmalısınız.\n" "\n" "\n" " - Kernel Açılış Vaxt Dolması: Bu vaxt dolması LILO açılış gecikməsinə " "uyğun gəlir. Linuksu\n" "seçdikdən sonra ana kernel parametri olaraq bu gecikmə 0.1 saniyə olaraq " "qurulu olacaqdır.\n" "\n" "\n" " - CD Açılışı Fəallaşsınmı?: Bu seçənəklə CDdən açılışı timsal edən 'C' " "xarakteri ilk açılışda çıxacaqdır.\n" "\n" "\n" " - OF Açılışı Fəallaşsın?: Bu seçənəklə OFdən (Open Firmware) açılışını " "timsal edən 'N' xarakteri\n" "ilk açılışda çıxacaqdır.\n" "\n" "\n" " - Ana OS: OF gecikməsi müddəti dolduğu vaxt hansı OSnin açılacağını " "göstərir." #: ../../help.pm:1 #, fuzzy, c-format msgid "" "You can add additional entries in yaboot for other operating systems,\n" "alternate kernels, or for an emergency boot image.\n" "\n" "For other OSs, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is the name you will have to type at the yaboot prompt to\n" "select this boot option.\n" "\n" " * Image: this would be the name of the kernel to boot. Typically, vmlinux\n" "or a variation of vmlinux with an extension.\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation.\n" "\n" " * Append: on Apple hardware, the kernel append option is often used to\n" "assist in initializing video hardware, or to enable keyboard mouse button\n" "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n" "The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation.\n" "\n" " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n" "need to allocate a large ramdisk, this option can be used to specify a\n" "ramdisk larger than the default.\n" "\n" " * Read-write: normally the \"root\" partition is initially mounted as\n" "read-only, to allow a file system check before the system becomes ``live''.\n" "You can override the default with this option.\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support.\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by pressing ENTER at the yaboot prompt. This entry will also be\n" "highlighted with a ``*'' if you press [Tab] to see the boot selections." msgstr "" "Burada yaboot üçün həm başqa əməliyyat sistemləri, həm alternativ " "kernellər,\n" " ya da təcili yardım açılış əksləri əlavə edə bilərsiniz.\n" "\n" "\n" "Başqa OSlər üçün girişin mənası ad və kök çığırından ibarətdir.\n" "\n" "\n" "Linuks üçün mühtəməl girişlər bunlar ola bilər: \n" "\n" "\n" " - Ad: Bu sadəcə olaraq yaboot üçün açılacaq sistemi timsal edən bir " "addır.\n" "\n" "\n" " - Əks: Bu isə açılacaq çəkirdəyin, yə'ni kernelin adıdır. Çox vaxt bu " "vmlinux və ya\n" "bunun variasiyalarıdır.\n" "\n" "\n" " - Kök: Linuks qurulumunun kök avadanlığı və ya '/'.\n" "\n" "\n" " \n" " - Əlavə: Apple avadanlıqlarında kernel əlavə seçənəkləri ilə sıxlıqla " "başlanğıc\n" "video avadanlığı və ya sıx sıx xəta verən 2ci və 3cü siçan düymələri üçün " "emulyasiya\n" "imkanları tanına bilir. Məsələn bunlar \n" "bir neçə nümunədir:\n" "\n" "\n" "\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 " "hda=autotune\n" "\n" "\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n" "\n" "\n" " \n" " - Initrd: Açılış avadanlığından əvvəl bə'zi açılış modullarını seçmək\n" "üçün işlədilir, ya da təcili yardım açılışlarında ramdisk əksini yükləmək " "imkanı verir.\n" "\n" "\n" " - Initrd-size: Ana ramdisk böyüklüyü ümumiyyətlə 4096 baytdır. Əgər daha " "geniş ramdisk bildirə\n" "bilərsiniz isə bu seçənəyi işlədin.\n" "\n" "\n" " - Oxuma-yazma: Normalda sistemin 'dirilməsindən' əvvəl bə'zi sınaqların " "aparıla bilməsi üçün\n" "'root' fayl sistemi bu moda soxulur. Bu seçənəyi nəzərə almayabilərsiniz.\n" "\n" "\n" " - NoVideo: Bəlkə Apple video avadanlığı problem çıxarda bilər.Onda bu " "seçənəklə\n" "sistemi 'novideo' modda təbii framebuffer dəstəyi ilə aça bilərsiniz.\n" "\n" "\n" " - Əsas: Bu seçənəklə Linuks sistemi əsas əməliyyat sistemi halına gətirə " "bilərsiniz.\n" "Onda ENTER düyməsinə basmaqla Linuks sistemi açılacaqdır. Bu giriş ayrıca " "TAB ilə açılış seçkilərinə baxdığınız vaxt \n" "'*' işarətilə işıqlandırılacaqdır." #: ../../help.pm:1 #, fuzzy, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, You'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" "DrakX PCI SCSI adapterleri axtarmağa cəhd edəcək. Əgə DrakX SCSI\n" "taparsa və hansı sürücü işlədiləcəyini bilərsə, her şey öz özünə\n" "qurulacaq.\n" "\n" "\n" "Əgər sisteminizdə SCSI adapteri yoxsa, DrakXin tanımayacağı bir\n" "ISA SCSI və ya PCI SCSI adapteri var isə, sizə sisteminizdə SCSI\n" "adapteri olub olmadığı soruşulacaq.\n" "Əgər SCSI adapteriniz yox isə, \"Yox\" tıqlayın. Əgər \"Var\"ı " "tıqlayarsanız.\n" "qarşınıza sürücüləin siyahısı çıxacaq, oradan sizə uyanını seçərsiniz.\n" "\n" "\n" "Əgər əllə qurmağı səçərsəniz, o zaman DrakX sizə adapterin xüsusiyyətlərini\n" "soruşacaq. İmkan verin ki, DrakX sərbəstcə özü xüsusiyyətləri tapsın.\n" "Çoxunda bu işə yarayır.\n" "\n" "\n" "Əgər istəmirsəniz isə, o zaman adapter üçün xüsusiyyətləri özünüz\n" "göstərməlisiniz. Bunun üçün İstifadəçinin Əl Kitabçasına\n" "(başlıq 3, \"Avadanlığınız üçün kollektiv mə'lumat) bölməsinə\n" "baxın. Ya da avadanlığınızın əl kitabçasından və ya\n" "veb səhifəsindən (Əgər internetə çıxışınız var isə)\n" "ya da Microsoft Windowsdan (Əgər sisteminizdə qurulu isə)\n" "mə'lumat alın." #: ../../help.pm:1 #, c-format msgid "" "Now, it's time to select a printing system for your computer. Other OSs may\n" "offer you one, but Mandrake Linux offers two. Each of the printing systems\n" "is best for a particular type of configuration.\n" "\n" " * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"pdq\n" "\" will handle only very simple network cases and is somewhat slow when\n" "used with networks.) It's recommended that you use \"pdq\" if this is your\n" "first experience with GNU/Linux.\n" "\n" " * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n" "printing to your local printer or to one halfway around the planet. It is\n" "simple to configure and can act as a server or a client for the ancient\n" "\"lpd \" printing system, so it compatible with older operating systems\n" "that may still need print services. While quite powerful, the basic setup\n" "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n" "sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n" "front-ends for printing or choosing printer options and for managing the\n" "printer.\n" "\n" "If you make a choice now, and later find that you don't like your printing\n" "system you may change it by running PrinterDrake from the Mandrake Control\n" "Center and clicking the expert button." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" "automated. DrakX will analyze the disk boot sector and act according to\n" "what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. This way you will be able to load either GNU/Linux or another\n" "OS.\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "If it cannot make a determination, DrakX will ask you where to place the\n" "bootloader.\n" "\n" "\"Boot device\": in most cases, you will not change the default (\"First\n" "sector of drive (MBR)\"), but if you prefer, the bootloader can be\n" "installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n" "(\"On Floppy\")." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "After you have configured the general bootloader parameters, the list of\n" "boot options that will be available at boot time will be displayed.\n" "\n" "If there are other operating systems installed on your machine they will\n" "automatically be added to the boot menu. You can fine-tune the existing\n" "options by clicking \"Add\" to create a new entry; selecting an entry and\n" "clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n" "your changes.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone who goes to the console and reboots the machine. You can delete the\n" "corresponding entries for the operating systems to remove them from the\n" "bootloader menu, but you will need a boot disk in order to boot those other\n" "operating systems!" msgstr "" "LILO (Linuks Yükləyici) və Grub açılış sistem yükləyiciləridir: sistemi " "Linuks\n" "ya da kompüterinizdə olan başqa bir əməliyyatiyle aça bilərlər.\n" "Əsasən bu digər əməliyyat sistemləri doğru bir şəkilde təsbit edilib " "açılışa\n" "qurula bilərlər. Əgər bir problem olarsa, buradan əllə əlavə edilə " "bilərlər.\n" "Parametrlər mövzusunda diqqətli olun." #: ../../help.pm:1 #, c-format msgid "" "This dialog allows to finely tune your bootloader:\n" "\n" " * \"Bootloader to use\": there are three choices for your bootloader:\n" "\n" " * \"GRUB\": if you prefer grub (text menu).\n" "\n" " * \"LILO with text menu\": if you prefer LILO with its text menu\n" "interface.\n" "\n" " * \"LILO with graphical menu\": if you prefer LILO with its graphical\n" "interface.\n" "\n" " * \"Boot device\": in most cases, you will not change the default\n" "(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n" "second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n" "\n" " * \"Delay before booting the default image\": after a boot or a reboot of\n" "the computer, this is the delay given to the user at the console to select\n" "a boot entry other than the default.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" "\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n" "system! Be sure you know what you do before changing any of the options. !!\n" "\n" "Clicking the \"Advanced\" button in this dialog will offer advanced options\n" "that are reserved for the expert user." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you have to enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only one authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That is why you must choose a password that is difficult to\n" "guess - DrakX will tell you if the password that you chose too easy. As you\n" "can see, you are not forced to enter a password, but we strongly advise you\n" "against. GNU/Linux is as prone to operator error as any other operating\n" "system. Since \"root\" can overcome all limitations and unintentionally\n" "erase all data on partitions by carelessly accessing the partitions\n" "themselves, it is important that it be difficult to become \"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it too\n" "easy to compromise a system.\n" "\n" "One caveat -- do not make the password too long or complicated because you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it in. To reduce\n" "the chance of a blind typing error you will need to enter the password\n" "twice. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will have to be used the first time you connect.\n" "\n" "If you wish access to this computer to be controlled by an authentication\n" "server, click the \"Advanced\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one as \"authentication\". If you do not\n" "know which to use, ask your network administrator.\n" "\n" "If you happen to have problems with reminding passwords, you can choose to\n" "have \"No password\", if your computer won't be connected to the Internet,\n" "and if you trust anybody having access to it." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "Xahiş edirik doğru qapını seçin. Məsələn, MS Windowsdakı COM1'in qarşılığı\n" "Linuksda ttyS0'dır." #: ../../help.pm:1 #, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be ``pressed'' by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the provided list.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and to\n" "go back to the list of choices.\n" "\n" "Wheel mice are occasionally not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n" "Scroll the mouse wheel to ensure that it is activated correctly. Once you\n" "see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n" "the buttons and check that the mouse pointer moves on-screen as you move\n" "your mouse." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Your choice of preferred language will affect the language of the\n" "documentation, the installer and the system in general. Select first the\n" "region you are located in, and then the language you speak.\n" "\n" "Clicking on the \"Advanced\" button will allow you to select other\n" "languages to be installed on your workstation, thereby installing the\n" "language-specific files for system documentation and applications. For\n" "example, if you will host users from Spain on your machine, select English\n" "as the default language in the tree view and \"Espanol\" in the Advanced\n" "section.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several ones, or even install them all by selecting the \"All\n" "languages\" box. Selecting support for a language means translations,\n" "fonts, spell checkers, etc. for that language will be installed.\n" "Additionally, the \"Use Unicode by default\" checkbox allows to force the\n" "system to use unicode (UTF-8). Note however that this is an experimental\n" "feature. If you select different languages requiring different encoding the\n" "unicode support will be installed anyway.\n" "\n" "To switch between the various languages installed on the system, you can\n" "launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n" "language used by the entire system. Running the command as a regular user\n" "will only change the language settings for that particular user." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Depending on the default language you chose in Section , DrakX will\n" "automatically select a particular type of keyboard configuration. However,\n" "you might not have a keyboard that corresponds exactly to your language:\n" "for example, if you are an English speaking Swiss person, you may have a\n" "Swiss keyboard. Or if you speak English but are located in Quebec, you may\n" "find yourself in the same situation where your native language and keyboard\n" "do not match. In either case, this installation step will allow you to\n" "select an appropriate keyboard from a list.\n" "\n" "Click on the \"More \" button to be presented with the complete list of\n" "supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding that will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "This step is activated only if an old GNU/Linux partition has been found on\n" "your machine.\n" "\n" "DrakX now needs to know if you want to perform a new install or an upgrade\n" "of an existing Mandrake Linux system:\n" "\n" " * \"Install\": For the most part, this completely wipes out the old\n" "system. If you wish to change how your hard drives are partitioned, or\n" "change the file system, you should use this option. However, depending on\n" "your partitioning scheme, you can prevent some of your existing data from\n" "being over- written.\n" "\n" " * \"Upgrade\": this installation class allows you to update the packages\n" "currently installed on your Mandrake Linux system. Your current\n" "partitioning scheme and user data is not altered. Most of other\n" "configuration steps remain available, similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n" "running version \"8.1\" or later. Performing an Upgrade on versions prior\n" "to Mandrake Linux version \"8.1\" is not recommended." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "\"Country\": check the current country selection. If you are not in this\n" "country, click on the \"Configure\" button and choose another one. If your\n" "country is not in the first list shown, click the \"More\" button to get\n" "the complete country list." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "Sürücünüzdə bir və ya daha çox Windows bölməsi tapıldı.\n" "Xahiş edirik Linuks Mandrakeni qurmaq üçün onlardan birini " "yenidənölçüləndirmək üzərə seçin.\n" "\n" "\n" "Xəbəriniz olsun, her bölmə bu cür sıralanıb; \"Linuks adı\",\"Windows\n" "adı\"\"Həcm\".\n" "\n" "\"Linuks adı\" bu cür kodlanıb: \"sürücü növü\", \"sürücü nömrəsi\",\"bölmə " "nömrəsi\" (məsələn, \"hda\").\n" "\n" "\n" "\"Sürücü növü\" sürücünüz IDE sürücü isə \"hd\"dirSCSI sürücü isə\n" "\"sd\"dir.\n" "\n" "\n" "\"Sürücü nömrəsi\" həmişə \"hd\" və ya \"sd\"dən sonrakı rəqəmdir.IDE " "sürücülər üçün:\n" "\n" "*\"a\" yəni \"birinci IDE idarəcisində ali sürücü\",\n" "\n" "*\"b\" yəni \"birinci IDE idarəcisində kölə sürücü\",\n" "\n" "*\"c\" yəni \"ikinci IDE idarəcisində ali sürücü\",\n" "\n" "*\"d\" yəni \"ikinci IDE idarəcisində kölə sürücü\".\n" "\n" "\n" "SCSI sürücülərində \"a\" nın mənası \"birinci sürücü\",\n" "\"b\"nin mənası \"ikinci sürücü\"dür vs..." #: ../../help.pm:1 #, fuzzy, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or from another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"Clear all\": this option deletes all partitions on the selected hard\n" "drive\n" "\n" " * \"Auto allocate\": this option enables you to automatically create ext3\n" "and swap partitions in free space of your hard drive\n" "\n" "\"More\": gives access to additional features:\n" "\n" " * \"Save partition table\": saves the partition table to a floppy. Useful\n" "for later partition-table recovery, if necessary. It is strongly\n" "recommended that you perform this step.\n" "\n" " * \"Restore partition table\": allows you to restore a previously saved\n" "partition table from a floppy disk.\n" "\n" " * \"Rescue partition table\": if your partition table is damaged, you can\n" "try to recover it using this option. Please be careful and remember that it\n" "doesn't always work.\n" "\n" " * \"Reload partition table\": discards all changes and reloads the\n" "partition table that was originally on the hard drive.\n" "\n" " * \"Removable media automounting\": unchecking this option will force\n" "users to manually mount and unmount removable medias such as floppies and\n" "CD-ROMs.\n" "\n" " * \"Wizard\": use this option if you wish to use a wizard to partition\n" "your hard drive. This is recommended if you do not have a good\n" "understanding of partitioning.\n" "\n" " * \"Undo\": use this option to cancel your changes.\n" "\n" " * \"Toggle to normal/expert mode\": allows additional actions on\n" "partitions (type, options, format) and gives more information about the\n" "hard drive.\n" "\n" " * \"Done\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "Bu nöqtədə siz Linuks Mandrake yükləmək üçün bölmələri seçməlisiniz. Əgər " "əvvəldən bölmələr var isə (sistemdə əvvəllər qurulu olan GNU/Linuks " "bölmələri və ya başqa bölmələndirmə vasitələri ilə hazırladığınız bölmələr), " "onları seçin və istifadə edin.\n" "Yoxsa onları bildirməlisiniz.\n" "\n" "\n" "Bölmələri yaratmaq üçün əvvəlci diski seçməlisiniz.\n" "Diski seçmək üçün birinci IDE sürücüsü üçün \"hda\" nı, ikinciyi seçmək üçün " "\"hdb\"ni, birinci SCSİ sürücüsü üçün ise \"sda\" vs tıqlamalısınız.\n" "\n" "\n" "Seçdiyiniz sürücüyə aşağıdakıları etməyə qadirsiniz:\n" "\n" " *Hamısını təmizlə: seçili sürücüdə bütün bölmələri silər.\n" "\n" "\n" " *Avtomatik: Sürücünüzdəki boş sahədə Ext2 və Swapbölmələrini avtomatik\n" "yaradar.\n" "\n" "\n" " *Bölmə cədvəlini qurtar: Zədələnmiş bölmə cədvəlinibərpa edər. Xahiş " "edirik\n" " diqqətli olun, çünkü bu da iflas edə bilər.\n" "\n" "\n" " *Gəri dön: İstəmədiyiniz seçkilərinizdən geri döndərər.\n" "\n" "\n" " *Yenidən yüklə: Bütün dəyişikliklərinizdən geri dönərbaşdakı bölmə " "cədvəlinə gələr.\n" "\n" "\n" " *Sehirbaz: Bölmələndirməyi bir sehirbaz edər. Təcrübəsizisəniz bunu " "seçin.\n" "\n" "\n" " *Floppy-dən bərpa et: Bölmə cədvəlini əvvəllər flopy-yə qeydetdiniz isə, " "bölmə cədvəlini bərpa edin.\n" "\n" "\n" " *Floppy-yə qeyd et: Daha sonradan bərpa etmek üçünbilgiləri floppy-yə qeyd " "edin.\n" " Bu seçki şiddətlə tövsiyə edilir.\n" "\n" "\n" " *Oldu: Bölmələndirmə bitdiyində, bunu seçərəkdəyişikliklərinizi qeyd " "edin.\n" "\n" "\n" "Xəbəriniz olsun, istənilən seçkiyə Tab ve Aşağı/Yuxarı oxlarını da işlədərək " "klaviaturadan idarə edə bilərsiniz.\n" "\n" "\n" "Bölmə seçildiyi zaman bunları işlədə bilərsiniz:\n" "\n" " *Ctrl-c yeni bölmə yaratmaq üçün (boş bölmə seçili olduğu zaman)\n" "\n" " *Ctrl-d bölməni ləğv etmək üçün\n" "\n" " *Ctrl-m bağlama nöqtəsini göstərmək üçün\n" "\n" "\n" "\n" "Əgər PPC kompüterdə qurulum aparırsınızsa, ən az 1 MBlıq balaca bir HFC " "'bootstrap' bölməsini yaboot açılış yükləyicisi üçün seçmək istəyəcəksiniz.\n" "Əgər daha çox yeriniz varsa ; məsələn 50 MB, onda bütün kernel və ramdisk " "əksini təcili açılış halları üçün saxlaya bilərsiniz." #: ../../help.pm:1 #, c-format msgid "" "At this point, DrakX will allow you to choose the security level desired\n" "for the machine. As a rule of thumb, the security level should be set\n" "higher if the machine will contain crucial data, or if it will be a machine\n" "directly exposed to the Internet. The trade-off of a higher security level\n" "is generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, keep the default option." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Bugs may have been\n" "fixed, security issues resolved. To allow you to benefit from these\n" "updates, you are now able to download them from the Internet. Check \"Yes\"\n" "if you have a working Internet connection, or \"No\" if you prefer to\n" "install updated packages later.\n" "\n" "Choosing \"Yes\" will display a list of places from which updates can be\n" "retrieved. Choose the one nearest you. A package-selection tree will\n" "appear: review the selection, and press \"Install\" to retrieve and install\n" "the selected package(s), or \"Cancel\" to abort." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a file system).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "it.\n" "\n" "Click on \"Next ->\" when you are ready to format partitions.\n" "\n" "Click on \"<- Previous\" if you want to choose another partition for your\n" "new Mandrake Linux operating system installation.\n" "\n" "Click on \"Advanced\" if you wish to select partitions that will be checked\n" "for bad blocks on the disk." msgstr "" "Yeni yaradılan bütün bölmələr şəkilləndirilməlidir\n" "(şəkilləndirmək yəni fayl sistemi yaratmaq - format).\n" "\n" "\n" "Bu arada var olan hazır bölmələri də üstündəkiləri silmək üçünyenidən " "şəkilləndirmək istəya\n" "bilərsiniz.\n" "Bunu istəyirsinizsə bu bölmələri də seçməlisiniz.\n" "\n" "\n" "Bunu ağlınızda tutun ki var olan bütün bölmələri şəkilləndirmək\n" "məcburi deyil.\n" "İşlətim sistəmini əmələ gətirən bölmələri (yəni\n" "\"/\", \"usr\" və ya \"var\"ı yenidən şəkilləndirmək üçün\n" "seçə bilərsiniz. Verilər olan \"home\"u məsələ toxunulmadan\n" "buraxa bilərsiniz.\n" "\n" "\n" "Diqqətli olun. şəkilləndirdiyiniz bölmələrdəki verilər\n" "geri gəlməz.\n" "\n" "\n" "Şəkilləndirməyə hazır isəniz \"Oldu\" düyməsini tıqlayın.\n" "\n" "\n" "Yeni Linuks Mandrake sisteminizi qurmaq üçün başqa bölmə seçmək\n" "istəyirsiniz isə \"Ləğv et\" düyməsinə basın." #: ../../help.pm:1 #, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to use. Just click \"Next ->\" to reboot the system. The first thing\n" "you should see after your computer has finished doing its hardware tests is\n" "the bootloader menu, giving you the choice of which operating system to\n" "start.\n" "\n" "The \"Advanced\" button shows two more buttons to:\n" "\n" " * \"generate auto-install floppy\": to create an installation floppy disk\n" "that will automatically perform a whole installation without the help of an\n" "operator, similar to the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"Replay\". This is a partially automated installation. The\n" "partitioning step is the only interactive procedure.\n" "\n" " * \"Automated\". Fully automated installation: the hard disk is\n" "completely rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a number of similar machines.\n" "See the Auto install section on our web site for more information.\n" "\n" " * \"Save packages selection\"(*): saves a list of the package selected in\n" "this installation. To use this selection with another installation, insert\n" "the floppy and start the installation. At the prompt, press the [F1] key\n" "and type >>linux defcfg=\"floppy\" <<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "At this point, you need to decide where you want to install the Mandrake\n" "Linux operating system on your hard drive. If your hard drive is empty or\n" "if an existing operating system is using all the available space you will\n" "have to partition the drive. Basically, partitioning a hard drive consists\n" "of logically dividing it to create the space needed to install your new\n" "Mandrake Linux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to lost data if there is an existing operating system already\n" "installed on the drive, partitioning can be intimidating and stressful if\n" "you are an inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on your hard drive configuration, several options are available:\n" "\n" " * \"Use free space\": this option will perform an automatic partitioning\n" "of your blank drive(s). If you use this option there will be no further\n" "prompts.\n" "\n" " * \"Use existing partition\": the wizard has detected one or more existing\n" "Linux partitions on your hard drive. If you want to use them, choose this\n" "option. You will then be asked to choose the mount points associated with\n" "each of the partitions. The legacy mount points are selected by default,\n" "and for the most part it's a good idea to keep them.\n" "\n" " * \"Use the free space on the Windows partition\": if Microsoft Windows is\n" "installed on your hard drive and takes all the space available on it, you\n" "have to create free space for Linux data. To do so, you can delete your\n" "Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n" "or resize your Microsoft Windows FAT partition. Resizing can be performed\n" "without the loss of any data, provided you previously defragment the\n" "Windows partition and that it uses the FAT format. Backing up your data is\n" "strongly recommended.. Using this option is recommended if you want to use\n" "both Mandrake Linux and Microsoft Windows on the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "then when you started. You will have less free space under Microsoft\n" "Windows to store your data or to install new software.\n" "\n" " * \"Erase entire disk\": if you want to delete all data and all partitions\n" "present on your hard drive and replace them with your new Mandrake Linux\n" "system, choose this option. Be careful, because you will not be able to\n" "undo your choice after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"Remove Windows\": this will simply erase everything on the drive and\n" "begin fresh, partitioning everything from scratch. All data on your disk\n" "will be lost.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Custom disk partitioning\": choose this option if you want to manually\n" "partition your hard drive. Be careful -- it is a powerful but dangerous\n" "choice and you can very easily lose all your data. That's why this option\n" "is really only recommended if you have done something like this before and\n" "have some experience. For more instructions on how to use the DiskDrake\n" "utility, refer to the ``Managing Your Partitions '' section in the\n" "``Starter Guide''." msgstr "" "Bu nöqtədə Linuks Mandrakeni sabit diskinizdə haraya quracağınıza\n" "qərar verəcəksiniz. Əgər diskiniz boş isə və ya bir başqa sistem\n" "bütün yeri doldurmuş isə, o zaman diskinizdə Linuks Mandrake üçün\n" "yer açmalısınız. Ona görə də diski bölmələndirməlisiniz.\n" "Bölmələndirmə əsasən diskinizdə məntiqi sürücülər yaratmaqdan ibarətdir.\n" "\n" "Ümumiyyətlə bölmələndirmənin təsiri geri dönülməzdir.Ona görə də\n" "bu iş çox gərgin və yorucudur. Əgər özünüzə inanmırsınız isə bu\n" "sehirbaz sizə yardım edər. Başlamadan əvvəl xahiş edirik əl kitabçanıza\n" "baxın. Və bu iş üçün bir az vaxt ayırın.\n" "\n" "\n" "Sizə ən az 2 bölmə lazımdır. Biri sistemin özünü köçürməsi üçün\n" "Digəri isə uydurma yaddaş (ya da digər adı ilə Swap) üçün.\n" "\n" "\n" "Əgər diskiniz onsuz da bölünmüş isə (əvvəlki sistemden ya da\n" "başqa bölmələndirmə vasitələri ilə hazırlanmış) quruluşda\n" "sadəcə olaraq o yerləri yükləmək üçün seçin.\n" "\n" "\n" "Əgər disk bölünməmiş ise, yuxarıdakı sehirbazdan istifadə edə bilərsiniz.\n" "Sisteminizin quruluşundan asılı olaraq müxtəlif imkanlarınız var:\n" "\n" "* Bütün diski sil: Linuks Mandrake qurmaq üçün bütün diskinizin\n" " üzərindəki bölmələri silər. Burada diqqətli olun.\n" " Sildikləriniz əsla geri gəlməz.\n" "\n" "\n" "* Windows bölməsindəki sahəni istifadə et: Sisteminizdə\n" " Microsoft Windows qurulu isə ve bütün diski əhatə edir isə\n" " Linuks Mandrake üçün bir yer ayırmalısınız. Bunun üçün\n" " ya bütün diski silməlisiniz (\"Bütün diski sil\" bax ya da\n" " \" Usta modu\" tövsiyələri) ya da yenidən bölmələndirməlisiniz.Bu iş heç " "bir mə'lumat itkisi olmadan da edilə bilər.Bunun başqa adı\n" " eyni kompüterdə həm Linuks Mandrake həm də Windows qurulu olmasıdır.\n" "\n" "\n" "t Bu seçkiyə getmədən əvvəl bir şeyi başa düşməlisiniz ki, yenidən " "bölmələndirmə ilə sizin Windows bölməsi kiçiləcəkdir.\n" " Yə'ni Windows altında daha az disk sahəsinə malik olacaqsınız.\n" "\n" "\n" "* Usta modu: Əgər əllə diski bölmək istəsəniz, bu modu seçin. Diqqətli " "olun.\n" " Bu mod güçlüdür amma bir o qədər də təhlükəlidir. Diskinizdəki bütün " "bilgiyi asandlıqla itirə bilərsiniz.\n" " Təcrübəsiz isəniz bunu seçməyin." #: ../../help.pm:1 #, c-format msgid "" "Finally, you will be asked whether you want to see the graphical interface\n" "at boot. Note this question will be asked even if you chose not to test the\n" "configuration. Obviously, you want to answer \"No\" if your machine is to\n" "act as a server, or if you were not successful in getting the display\n" "configured." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then proposed to choose the server that\n" "best suits your needs." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Resolution\n" "\n" " You can choose here resolutions and color depth between those available\n" "for your hardware. Choose the one that best suit your needs (you will be\n" "able to change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Monitor\n" "\n" " The installer can normally automatically detect and configure the\n" "monitor connected to your machine. If it is not the case, you can choose in\n" "this list the monitor you actually own." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n" "\n" "You will be presented the list of different parameters to change to get an\n" "optimal graphical display: Graphic Card\n" "\n" " The installer can normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose in this list the card you actually own.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then proposed to choose the server that\n" "best suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " The installer can normally automatically detect and configure the\n" "monitor connected to your machine. If it is not the case, you can choose in\n" "this list the monitor you actually own.\n" "\n" "\n" "\n" "Resolution\n" "\n" " You can choose here resolutions and color depth between those available\n" "for your hardware. Choose the one that best suit your needs (you will be\n" "able to change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor.\n" "\n" "\n" "\n" "Test\n" "\n" " the system will try to open a graphical screen at the desired\n" "resolution. If you can see the message during the test and answer \"Yes\",\n" "then DrakX will proceed to the next step. If you cannot see the message, it\n" "means that some part of the autodetected configuration was incorrect and\n" "the test will automatically end after 12 seconds, bringing you back to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " You can here choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"No\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Graphic Card\n" "\n" " The installer can normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose in this list the card you actually own.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then proposed to choose the server that\n" "best suits your needs." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n" "system clock and the hardware clock are in the same timezone. This is\n" "useful when the machine also hosts another operating system like Windows.\n" "\n" "The \"Automatic time synchronization \" option will automatically regulate\n" "the clock by connecting to a remote time server on the Internet. For this\n" "feature to work, you must have a working Internet connection. It is best to\n" "choose a time server located near you. This option actually installs a time\n" "server that can used by other machines on your local network." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "This dialog is used to choose which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all the services available on the current installation.\n" "Review each one carefully and uncheck those which are not always needed at\n" "boot time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you are not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services that you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" "İndi, açılışda avtomatik olaraq başlamasını istədiyiniz xidmətləri \n" "seçə bilərsiniz. Siçan bir maddənin üzərina gəldiyində o xidmətin rolunu " "açıqlayan\n" "kiçik bir baloncuq ortaya çıxacaqdır.\n" "\n" "Əgər kompüterinizi bir verici olaraq istifadə edəcəksəniz bu addımda tam bir " "diqqət ayırmalısınız:\n" "mühtəməldir ki lazımi heç bir xidməti başlatmaq istəməzsiniz." #: ../../help.pm:1 #, c-format msgid "" "\"Printer\": clicking on the \"Configure\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used during installation." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "You will now set up your Internet/network connection. If you wish to\n" "connect your computer to the Internet or to a local network, click \"Next\n" "->\". Mandrake Linux will attempt to autodetect network devices and modems.\n" "If this detection fails, uncheck the \"Use auto detection\" box. You may\n" "also choose not to configure the network, or to do it later, in which case\n" "clicking the \"Cancel\" button will take you to the next step.\n" "\n" "When configuring your network, the available connections options are:\n" "traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n" "simple LAN connection (Ethernet).\n" "\n" "We will not detail each configuration option - just make sure that you have\n" "all the parameters, such as IP address, default gateway, DNS servers, etc.\n" "from your Internet Service Provider or system administrator.\n" "\n" "You can consult the ``Starter Guide'' chapter about Internet connections\n" "for details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "If you told the installer that you wanted to individually select packages,\n" "it will present a tree containing all packages classified by groups and\n" "subgroups. While browsing the tree, you can select entire groups,\n" "subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right to let you know the purpose of the package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you will be asked to confirm that you really want those servers to be\n" "installed. By default Mandrake Linux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that that\n" "security holes are discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"No\". Clicking \"Yes \" will\n" "install the listed services and they will be started automatically by\n" "default during boot. !!\n" "\n" "The \"Automatic dependencies\" option is used to disable the warning dialog\n" "which appears whenever the installer automatically selects a package to\n" "resolve a dependency issue. Some packages have relationships between each\n" "other such that installation of a package requires that some other program\n" "is already installed. The installer can determine which packages are\n" "required to satisfy a dependency to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert a floppy disk previously created at the\n" "end of another installation. See the second tip of last step on how to\n" "create such a floppy." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "to make it simpler to manage the packages have been placed into groups of\n" "similar applications.\n" "\n" "Packages are sorted into groups corresponding to a particular use of your\n" "machine. Mandrake Linux has four predefined installations available. You\n" "can think of these installation classes as containers for various packages.\n" "You can mix and match applications from the various containers, so a\n" "``Workstation'' installation can still have applications from the\n" "``Development'' container installed.\n" "\n" " * \"Workstation\": if you plan to use your machine as a workstation,\n" "select one or more of the applications that are in the workstation\n" "container.\n" "\n" " * \"Development\": if plan on using your machine for programming, choose\n" "the appropriate packages from the container.\n" "\n" " * \"Server\": if your machine is intended to be a server, select which of\n" "the more common services you wish to install on your machine.\n" "\n" " * \"Graphical Environment\": this is where you will choose your preferred\n" "graphical environment. At least one must be selected if you want to have a\n" "graphical interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you unselect all groups when performing a regular\n" "installation (as opposed to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"With X\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"With basic documentation\": installs the base system plus basic\n" "utilities and their documentation. This installation is suitable for\n" "setting up a server.\n" "\n" " * \"Truly minimal install\": will install the absolute minimum number of\n" "packages necessary to get a working Linux system. With this installation\n" "you will only have a command line interface. The total size of this\n" "installation is 65 megabytes.\n" "\n" "You can check the \"Individual package selection\" box, which is useful if\n" "you are familiar with the packages being offered or if you want to have\n" "total control over what will be installed.\n" "\n" "If you started the installation in \"Upgrade\" mode, you can unselect all\n" "groups to avoid installing any new package. This is useful for repairing or\n" "updating an existing system." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM so it will eject\n" "the current CD and ask you to insert the correct CD as required." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Here are Listed the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "Yuxarıda sürücünüzdə tapılan Linuks bölmələri sıralanıb\n" "Sehirbazın tövsiyələrinə uyun, onlar çox vaxt işə yarayır.\n" "Əgər bunu istəməsəniz en azından kök bölməsi (\"/\") seçməlisiniz\n" "Çox kiçik bölmə seçməyin. yoxsa çox proqram tə'minatı yükləyə bilməzsəniz.\n" "Əgər verilərinizi başqa bölmədə tutmaq istəyirsinizsə, ondabir de \"/home\" " "bölməsi də yaratmalısınız (birdən çox Linuks\n" "bölməniz var isə).\n" "\n" "\n" "Xəbəriniz olsun, hər bölmə aşağıdakı kimi sıralanıb: \"Ad\", \"Həcm\".\n" "\n" "\n" "\"Ad\" belə kodlanıb: \"sürücü növü\", \"sürücü mömrəsi\",\n" "\"bölmə nömrəsi\" (məsələn \"hda1\").\n" "\n" "\n" "\"Sürücü növü\" əgər sürücünüz IDE sürücüdürsə \"hd\"dirvə SCSI sürücü isə " "\"sd\"dir.\n" "\n" "\n" "\"Sürücü nömrəsi\" həmişə \"hd\" və ya \"sd\"dən sonrakı rəqəmdir.IDE " "sürücülər üçün:\n" "\n" "*\"a\" yəni \"birinci IDE idarəcisində ali sürücü\",\n" "\n" "*\"b\" yəni \"birinci IDE idarəcisində kölə sürücü\",\n" "\n" "*\"c\" yəni \"ikinci IDE idarəcisində ali sürücü\",\n" "\n" "*\"d\" yəni \"ikinci IDE idarəcisində kölə sürücü\".\n" "\n" "\n" "SCSI sürücülərində \"a\" nın mənası \"birinci sürücü\",\n" "\"b\"nin mənası \"ikinci sürücü\"dür vs..." #: ../../help.pm:1 #, c-format msgid "" "GNU/Linux is a multi-user system, meaning each user can have their own\n" "preferences, their own files and so on. You can read the ``Starter Guide''\n" "to learn more about multi-user systems. But unlike \"root\", which is the\n" "system administrator, the users you add at this point will not be\n" "authorized to change anything except their own files and their own\n" "configuration, protecting the system from unintentional or malicious\n" "changes that impact the system as a whole. You will have to create at least\n" "one regular user for yourself -- this is the account which you should use\n" "for routine, day-to-day use. Although it is very easy to log in as \"root\"\n" "to do anything and everything, it may also be very dangerous! A mistake\n" "could mean that your system would not work any more. If you make a serious\n" "mistake as a regular user, the worst that will happen is that you will lose\n" "some information, but not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you typed in and copy it to the \"User name\" field, which is the name this\n" "user will enter to log onto the system. If you like, you may override the\n" "default and change the username. The next step is to enter a password. From\n" "a security point of view, a non-privileged (regular) user password is not\n" "as crucial as the \"root\" password, but that is no reason to neglect it by\n" "making it blank or too simple: after all, your files could be the ones at\n" "risk.\n" "\n" "Once you click on \"Accept user\", you can add other users. Add a user for\n" "each one of your friends: your father or your sister, for example. Click\n" "\"Next ->\" when you have finished adding users.\n" "\n" "Clicking the \"Advanced\" button allows you to change the default \"shell\"\n" "for that user (bash by default).\n" "\n" "When you are finished adding all users, you will be asked to choose a user\n" "that can automatically log into the system when the computer boots up. If\n" "you are interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click \"Next\n" "->\". If you are not interested in this feature, uncheck the \"Do you want\n" "to use this feature?\" box." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandrake Linux distribution. If you do agree with all the\n" "terms in it, check the \"Accept\" box. If not, simply turn off your\n" "computer." msgstr "" #: ../../install2.pm:1 #, c-format msgid "You must also format %s" msgstr "" #: ../../install2.pm:1 #, c-format msgid "" "Can't access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" #: ../../install_any.pm:1 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "Bir xəta oldu. Yeni fayl sisteminin yaradılacağı hökmlü bir sürücü " "tapılmadı. Bu problemin qaynağı üçün avadanlığınızı yoxlayın" #: ../../install_any.pm:1 ../../partition_table.pm:1 #, c-format msgid "Error reading file %s" msgstr "%s faylı oxunurkan xəta oldu" #: ../../install_any.pm:1 #, c-format msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" "Bu saxlanmış paketlər seçkisini işlətmək üçün qurulumu ``linux " "defcfg=floppy''ilə başladın." #: ../../install_any.pm:1 #, c-format msgid "This floppy is not FAT formatted" msgstr "Bu floppi FAT şəklində deyildir" #: ../../install_any.pm:1 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "%s sürücüsünə FAT şəkilləndirilmiş bir disket taxın" #: ../../install_any.pm:1 #, c-format msgid "Can't use broadcast with no NIS domain" msgstr "NİS domeyni olmadan translasiya işlədilə bilməz" #: ../../install_any.pm:1 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" #: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1 #: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 #: ../../standalone/harddrake2:1 #, c-format msgid "No" msgstr "Xeyr" #: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1 #: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1 #: ../../standalone/harddrake2:1 #, c-format msgid "Yes" msgstr "Bəli" #: ../../install_any.pm:1 #, fuzzy, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "bu vericiləri seçdiniz: %s\n" "\n" "\n" "bu vericilər əsasən fəallaşdırılır. Onların heç bir təhlükəsizlik\n" "problemləri yoxdur, amma bə'zi xətalar tapıla bilər. Belə olsa, mümükün olan " "ən yaxın zamanda güncəlləməlisiniz.\n" "\n" "\n" "Bu vericiləri qurmaq istəyirsiniz?\n" #: ../../install_gtk.pm:1 #, fuzzy, c-format msgid "System configuration" msgstr "Quraşdırma" #: ../../install_gtk.pm:1 #, fuzzy, c-format msgid "System installation" msgstr "SILO Qurulumu" #: ../../install_interactive.pm:1 #, c-format msgid "Bringing down the network" msgstr "Şəbəkə dayandırılır" #: ../../install_interactive.pm:1 #, c-format msgid "Bringing up the network" msgstr "Şəbəkə fəallaşdırılır" #: ../../install_interactive.pm:1 #, c-format msgid "Partitioning failed: %s" msgstr "Bölmə cədvəli növü: %s" #: ../../install_interactive.pm:1 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "DrakX bölmə sehirbazı bu yolu tapdı:" #: ../../install_interactive.pm:1 #, c-format msgid "I can't find any room for installing" msgstr "Artıq bölmə əlavə edilə bilməz" #: ../../install_interactive.pm:1 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "İndi %s sabit diskinizi bölmələndirə bilərsiniz\n" "İşinizi bitirdiyinizdə `w' ilə qeyd etməyi unutmayın" #: ../../install_interactive.pm:1 #, c-format msgid "Use fdisk" msgstr "Fdisk istifadə et" #: ../../install_interactive.pm:1 #, c-format msgid "Custom disk partitioning" msgstr "Hazırkı disk bölmələndirməsi" #: ../../install_interactive.pm:1 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "" "%s bölüməsinin böyüklüyü dəyişdirildikdən sonra bu bölmədəki bütün " "mə'lumatlar silinəcəkdir" #: ../../install_interactive.pm:1 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "" "Sizin birdən çox diskiniz var, linux qurmaq üçün hansını istifadə " "edəcəksiniz?" #: ../../install_interactive.pm:1 #, c-format msgid "Erase entire disk" msgstr "Bütün diski sil" #: ../../install_interactive.pm:1 #, c-format msgid "Remove Windows(TM)" msgstr "\"Windows\"u sil" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "FAT bölməsi yoxdur ya da loopback üçün lazımi yer buraxılmayıb" #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "FAT resizing failed: %s" msgstr "FAT böyüklüyü dəyişdirilməsi bacarılmadı: %s" #: ../../install_interactive.pm:1 #, c-format msgid "Resizing Windows partition" msgstr "Fat fayl sistemi ucları hesaplanır" #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Resizing" msgstr "Böyüklüyü dəyişdirilir" #: ../../install_interactive.pm:1 #, c-format msgid "partition %s" msgstr "bölmə %s" #: ../../install_interactive.pm:1 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "Hansı sektora daşımaq istəyirsiniz?" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful:\n" "this operation is dangerous. If you have not already done\n" "so, you should first exit the installation, run scandisk\n" "under Windows (and optionally run defrag), then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "DİQQƏT!\n" "\n" "DrakX \"Windows\" disk bölmənizin böyüklüyünü dəyişdirəcək. Bu iş \n" "tehlükəli ola bilər. Aşina deyil isəniz qurulumdan çıxın və \"Windows\" \n" "altında \"Scandisk\" (lazım gələrsə \"defrag\" da) proqramını çalışdırın. " "Ardından quruluma \n" "davam edin. Verilərinizin yedəyini almağı da unutmayın!" #: ../../install_interactive.pm:1 #, c-format msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrake Linux " "installation." msgstr "" "Sizin Windows bölümü çox dağınıqdır. Daxiş edirik, əvvəlcə birləşdirin " "(defraq)" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "Computing the size of the Windows partition" msgstr "Windows bölməsindəki boş sahəni işlət" #: ../../install_interactive.pm:1 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" "FAT tədqiqatçımız sizin bölümləri işlədə bilmir,\n" "bu xəta oldu: %s" #: ../../install_interactive.pm:1 #, c-format msgid "Which partition do you want to resize?" msgstr "Hansı bölmənin böyüklüyünü dəyişdirəcəksiniz?" #: ../../install_interactive.pm:1 #, c-format msgid "Use the free space on the Windows partition" msgstr "Windows bölməsindəki boş sahəni işlət" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "FAT bölməsi yoxdur ya da loopback üçün lazımi yer buraxılmayıb" #: ../../install_interactive.pm:1 #, c-format msgid "Swap partition size in MB: " msgstr "Swap sahəsi böyüklüyü (Mb): " #: ../../install_interactive.pm:1 #, c-format msgid "Root partition size in MB: " msgstr "Kök (root) bölməsi böyüklüyü (Mb): " #: ../../install_interactive.pm:1 #, c-format msgid "Choose the sizes" msgstr "Böyüklüklərini seçin" #: ../../install_interactive.pm:1 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "Linuks4Win'i qurmaq üçün hansı disk bölməsini istifadə edəcəksiniz?" #: ../../install_interactive.pm:1 #, c-format msgid "Use the Windows partition for loopback" msgstr "Loopback üçün Windows bölməsini işlət" #: ../../install_interactive.pm:1 #, c-format msgid "There is no existing partition to use" msgstr "Bölmə cədvəli qurtarılmağa çalışılır" #: ../../install_interactive.pm:1 #, c-format msgid "Use existing partitions" msgstr "Var olan bölmələri işlədimmi" #: ../../install_interactive.pm:1 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "Yeni bölmələr üçün boş sahə yoxdur" #: ../../install_interactive.pm:1 #, c-format msgid "Use free space" msgstr "Boş sahəni istifadə et" #: ../../install_interactive.pm:1 ../../install_steps.pm:1 #, fuzzy, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "Bir swap sahəsinə ehtiyacınız var" #: ../../install_interactive.pm:1 #, c-format msgid "" "You don't have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "Bir swap sahəniz yoxdur\n" "Davam edim?" #: ../../install_interactive.pm:1 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Bir root disk bölümüna ehtiyacınız var.\n" "Bunun üçün istər mövcud bir disk bölümü üzərina tıqlayın, \n" "ya da yeni birini başdan yaradın. Sonra \"Bağlama \n" "Nöqtəsi\"nə gəlin va burayı '/' olaraq dəyişdirin." #: ../../install_interactive.pm:1 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "Sisteminizdaki bə'zi avadanlıqlar işləməsi üçün düzgün sürücülərə ehtiyac " "duyar.\n" "Bunun haqqında %s də/a lazımi malumatları tapa bilərsiniz" #: ../../install_messages.pm:1 #, fuzzy, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandrake " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" "Təbriklər, quruluş bitdi.\n" "Cdrom və disketi çıxartdıqtan sonra Enter'ə basaraq kompüterinizi \n" "yenidən başladın. Linuks Mandrake'nin bu buraxılışındakı yamaqlar haqqında \n" "mə'lumat almaq üçün http://www.mandrakelinux.com ünvanından Errata'ya " "baxın.\n" "Sisteminizin qurğuları haqqında daha geniş bilgiyi Linuks Mandrake \n" "İstifadəçi Kitabcığında tapa bilərsiniz." #: ../../install_messages.pm:1 #, c-format msgid "http://www.mandrakelinux.com/en/91errata.php3" msgstr "" #: ../../install_messages.pm:1 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a şəbəkə. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" #: ../../install_messages.pm:1 #, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" "Introduction\n" "\n" "The operating system and the different components available in the Linuks-" "Mandrake distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Linuks-Mandrake distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Linuks-Mandrake sites which are prohibited or restricted in " "some countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Linuks-Mandrake\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" #: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1 #, c-format msgid "Entering step `%s'\n" msgstr "Başlanğıc addımı `%s'\n" #: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 #: ../../standalone/harddrake2:1 #, c-format msgid "Help" msgstr "Yardım" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "not configured" msgstr "yenidən quraşdır" #: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakgw:1 #, c-format msgid "Configure" msgstr "Qur" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Go on anyway?" msgstr "Yenə də davam edək?" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error installing packages:" msgstr "Paketlər qurulurkən bir xəta oldu:" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error ordering packages:" msgstr "Paketləri istərkən bir xəta oldu:" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "Cd-Romu dəyişdirin!\n" "\n" "\"%s\" adlı Cd-Romu sürücünüzə taxın və OLDU'ya basın.\n" "Əgər Cd-Rom əlinizdə deyilsə bu Cd-Rom'dan qurmamaq üçün İMTİNA ET'ə basın." #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Refuse" msgstr "Rədd Et" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #: ../../standalone/drakautoinst:1 #, c-format msgid "Accept" msgstr "Qəbul Et" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Installing package %s" msgstr "%s paketi qurulur" #: ../../install_steps_gtk.pm:1 #, c-format msgid "%d packages" msgstr "%d paket" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "No details" msgstr "Ətraflı" #: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Details" msgstr "Ətraflı" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Please wait, preparing installation..." msgstr "Xahiş edirik gözləyin, qurulum hazırlanır" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Time remaining " msgstr "Qalan müddət" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Estimating" msgstr "Təxmini olaraq hesaplanır" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Installing" msgstr "Qurulur" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the packages you want to install" msgstr "Qurmaq istədiyiniz paketləri seçin" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "Minimal install" msgstr "Qurulumdan çıx" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "Updating package selection" msgstr "Paket seçkilərini saxla" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "Load/Save on floppy" msgstr "Disketə qeyd et" #: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1 #: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 #, c-format msgid "<- Previous" msgstr "<- Əvvəlki" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #: ../../standalone/drakbackup:1 #, c-format msgid "Install" msgstr "Qurulum" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Show automatically selected packages" msgstr "Avtomatik seçili paketləri göstər" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It must be upgraded" msgstr "Bu paketi sistemdən çıxarda bilməzsiniz. Yenilənməlidir" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "Bu paket yenilənməlidir\n" "Sistemdən çıxarmaq mövzusunda ciddisiniz?" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It is already installed" msgstr "Bu paketi sistemdən çıxarda bilməzsınız. Artıq qurulmuşdur." #: ../../install_steps_gtk.pm:1 #, c-format msgid "This is a mandatory package, it can't be unselected" msgstr "Bu lazımlı bir paketdir, sistemdən çıxardıla bilməz" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't select/unselect this package" msgstr "Bu paketi seçə bilməzsiniz/sistemdən çıxarda bilməzsınız" #: ../../install_steps_gtk.pm:1 #, c-format msgid "The following packages are going to be removed" msgstr "Aşağıdakı paketlər sistemdən silinəcəklər" #: ../../install_steps_gtk.pm:1 #, c-format msgid "The following packages are going to be installed" msgstr "Aşağıdakı paketlər qurulacaqdır" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "You can't select this package as there is not enough space left to install it" msgstr "Bu paketi seçə bilməzsiniz, çünki qurmaq üçün yer çatmır." #: ../../install_steps_gtk.pm:1 #, c-format msgid "Importance: %s\n" msgstr "Əhəmiyyət: %s\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Size: %d KB\n" msgstr "Böyüklüyü: %d KB\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Version: %s\n" msgstr "Buraxılış: %s\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Name: %s\n" msgstr "Ad: %s\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Bad package" msgstr "Xətalı paket" #: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Other" msgstr "Digər" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Total size: %d / %d MB" msgstr "Ümumi böyüklük: %d / %d Mb" #: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1 #: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 #, c-format msgid "Next ->" msgstr "Sonrakı ->" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Individual package selection" msgstr "Fərdi paket seçkisi" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Package Group Selection" msgstr "Paket Qrup Seçkisi" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "Sizin sisteminizin qaynaqları çatışmır. Qurulum ərzində problem yaşaya " "bilərsiniz\n" "Bu baş verərsə mətn aracılığı ilə qurulumu sınamalısınız. Bunun üçün " "dəCDROMdan başlatdığınız zaman,\n" " 'F1'ə basın və 'text' yazaraq enter'ə basın." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Save packages selection" msgstr "Paket seçkilərini saxla" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Automated" msgstr "Avtomatlaşdırılmış" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Replay" msgstr "Təkrarla" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "Avtomatik qurulum disketi hazırlanması seçilərsə,\n" "bütün sabit disk mə'lumatı daxil ediləcəkdir!!\n" "(yə'ni başqa sistemi də qura bilmək üçün).\n" "\n" "Bu qurulumu takrar etmək istəyə bilərsiniz axı.\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Generate auto install floppy" msgstr "Avtomatik qurulum disketi hazırlanır" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Reboot" msgstr "Kök" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "Bə'zi bölmələr bitdi.\n" "\n" "Həqiqətən də çıxmaq istəyirsiniz?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Creating auto install floppy..." msgstr "Avtomatik qurulum disketi hazırlanır" #: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "%s sürücüsünə boş bir disket yerləşdirin" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "Siz Open Fİrmware açılış avadanlığınızı açılış yükləyicisini\n" "fəallaşdırmaq üçün dəyişdirməli ola bilərsiniz. Əmr-Seçənək-O-F düymələrini\n" " yenidən başlarkən basın və bunları girin:\n" " setenv boot-device %s,\\\\:tbxi\n" " Sonra da bunları yazın: shut-down\n" "Bir sonrakı başlanğıcda açılış yükləyicisi sətirini görməlisiniz." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Installation of bootloader failed. The following error occured:" msgstr "Açılış yükləyicisi qurulumu iflas etdi. Xəta:" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Installing bootloader" msgstr "Sistem yükləyicini qur" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "aboot qurulumunda xata, \n" "ilk disk bölməsini yox etsə belə yenə də qurulmasını istəyirsiniz?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Do you want to use aboot?" msgstr "aboot istifadə etmək istəyirsiniz?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX or some other means to boot your machine" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing bootloader..." msgstr "Açılış yükləyici hazırlanır" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Domain Admin Password" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Domain Admin User Name" msgstr "Sahə(domain) adı" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Windows Domain" msgstr "NIS sahəsi" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Authentication Windows Domain" msgstr "Tanıtma" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "NIS Server" msgstr "NIS Verici" #: ../../install_steps_interactive.pm:1 #, c-format msgid "NIS Domain" msgstr "NIS sahəsi" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Authentication NIS" msgstr "NIS" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "NIS" msgstr "NIS istifadə et" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "LDAP Server" msgstr "Verici" #: ../../install_steps_interactive.pm:1 #, c-format msgid "LDAP Base dn" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Authentication LDAP" msgstr "Tanıtma" #: ../../install_steps_interactive.pm:1 #, c-format msgid "LDAP" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Local files" msgstr "Yerli Çap Edici" #: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1 #: ../../standalone/drakconnect:1 ../../standalone/logdrake:1 #, c-format msgid "Authentication" msgstr "Tanıtma" #: ../../install_steps_interactive.pm:1 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "Bu parol çox sadədir (en az %d xarakter boyunda olmalıdır)" #. -PO: keep this short or else the buttons will not fit in the window #: ../../install_steps_interactive.pm:1 #, c-format msgid "No password" msgstr "Parolsuz" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Set root password" msgstr "Root parolunu qur" #: ../../install_steps_interactive.pm:1 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "" #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #, c-format msgid "Services: %d activated for %d registered" msgstr "" #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #, fuzzy, c-format msgid "Services" msgstr "avadanlıq" #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "System" msgstr "Sistem modu" #. -PO: example: lilo-graphic on /dev/hda1 #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "%s on %s" msgstr "Qapı" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Bootloader" msgstr "İstifadə ediləcək Açılış idarəcisi" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Boot" msgstr "Kök" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "disabled" msgstr "passivləşdir" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "activated" msgstr "Fəal" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Firewall" msgstr "Verici, Firewall/Ruter" #: ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, c-format msgid "Security" msgstr "Təhlükəsizlik" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Security Level" msgstr "Təhlükəsizlik səviyyəsinin quraşdırılması" #: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Network" msgstr "Şəbəkə ara üzü" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Network & Internet" msgstr "Şəbəkə ara üzü" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Graphical interface" msgstr "X ilə Açılış" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Hardware" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "TV card" msgstr "TV kartı" #: ../../install_steps_interactive.pm:1 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Do you have an ISA sound card?" msgstr "Başqa var?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Sound card" msgstr "Səs kartı" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Remote CUPS server" msgstr "Uzaq CUPS vericisi" #: ../../install_steps_interactive.pm:1 #, c-format msgid "No printer" msgstr "Çap Edicisiz" #: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1 #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer" msgstr "Çap Edici" #: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1 #, c-format msgid "Mouse" msgstr "Siçan" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Timezone" msgstr "Vaxt Dilimi" #: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1 #, c-format msgid "Keyboard" msgstr "Klaviatura" #: ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, c-format msgid "Summary" msgstr "Mündəricat" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "NTP Server" msgstr "NIS Verici" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Hardware clock set to GMT" msgstr "Avadanlıq saatınız GMT-yə göra quruludur mu?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Which is your timezone?" msgstr "Sisteminiz hansı məqsədlə istifadə ediləcək?" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Would you like to try again?" msgstr "Bir çap edici qurmaq istəyirsiniz?" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Unable to contact mirror %s" msgstr "Fork edilə bilmir: %s" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "Əks ünvanına bağlantı qurulur" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "Paketleri almaq üçün bir əks ünvanı seçin" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "" "Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "Əks ünvanına bağlantı qurulur" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates ?" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "%s sürücüsünə boş bir disket yerləşdirin" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "%s sürücüsünə bir disket taxın" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Post-install configuration" msgstr "Qurulum sonrası qurğular" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "%s paketi qurulur\n" "%d%%" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing installation" msgstr "Qurulum hazırlanır" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "\"%s\" adlı Cd-Rom" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "Aşağıdakı siyahıdakı bütün CD'lərə sahib isəniz, OLDU'ya basın.\n" "CD'lərin heç birinə sahib deyilsəniz, İMTİNA ET'ə basın.\n" "CD'lərdən bə'ziləi əksik isə, onları seçili vəziyyətdən çıxardıb OLDU'ya " "basın." #: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "All" msgstr "Hamısı" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "With basic documentation (recommended!)" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "With X" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Type of install" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Selected size is larger than available space" msgstr "Seçili böyüklük var olandan daha böyükdür" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Insert a floppy containing package selection" msgstr "%s sürücüsünə bir disket taxın" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Loading from floppy" msgstr "Disketdən geri çağır" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Package selection" msgstr "Paket Qrup Seçkisi" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Save on floppy" msgstr "Disketə qeyd et" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Load from floppy" msgstr "Disketdən geri çağır" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" "Sisteminizdə qurulum ya da güncəlləmə üçün lazımi boş yer yoxdur(%d > %d)" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking for available packages..." msgstr "Mövcud olan paketlər axtarılır." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Finding packages to upgrade..." msgstr "Güncəllənəcək paketlar tapılır" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Looking at packages already installed..." msgstr "Bu paketi sistemdən çıxarda bilməzsınız. Artıq qurulmuşdur." #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "Mövcud olan paketlər axtarılır." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "Qurulumu bitirmək üçün lazımi sahə yoxdur, xahiş edirik əlavə edin" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can loose data)" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Check bad blocks?" msgstr "Xətalı bloklar sınansınmı?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the partitions you want to format" msgstr "Şəkilləndiriləcək disk bölmələrini seçin" #: ../../install_steps_interactive.pm:1 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "" "Bölmə cəvəlindəki dəyişikliklərin daxil olması üçün kompüterinizi yenidən " "başlatmalısınız." #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the mount points" msgstr "Bağlama nöqtələrini seçin" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Scanning partitions to find mount points" msgstr "Bağlama nöqtələri üçün bölmələr daranır" #: ../../install_steps_interactive.pm:1 #, c-format msgid "No partition available" msgstr "uyğun bölmə tapılmadı" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Configuring IDE" msgstr "IDE qapıları qurulur" #: ../../install_steps_interactive.pm:1 #, c-format msgid "IDE" msgstr "IDE" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Configuring PCMCIA cards..." msgstr "PCMCIA kartlar qurulur..." #: ../../install_steps_interactive.pm:1 #, c-format msgid "PCMCIA" msgstr "PCMCIA" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 3 Emulation" msgstr "Düymə 3 emulyasiyası" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 2 Emulation" msgstr "Düymə 2 emulyasiyası" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Buttons emulation" msgstr "Düymə emulyasiyası" #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "Siçanınızın bağlı olduğu serial Qapıyı seçin." #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format msgid "Mouse Port" msgstr "Siçan Qapısı" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Please choose your type of mouse." msgstr "Xahiş edirik siçanınızın növünü seçin." #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Encryption key for %s" msgstr "Parollar uyğun gəlmir" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Upgrade %s" msgstr "Güncəlləmə" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Is this an install or an upgrade?" msgstr "Bu bir qurulum mu, yoxsa güncəlləməmidir?" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Install/Upgrade" msgstr "Qurulum/Güncəlləmə" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Here is the full list of keyboards available" msgstr "Bütün mövcud klaviaturaların siyahısı" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Please choose your keyboard layout." msgstr "Klaviatura quruluşunu seçiniz." #: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1 #: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakperm:1 ../../standalone/draksplash:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/scannerdrake:1 #, c-format msgid "Quit" msgstr "Çıx" #: ../../install_steps_interactive.pm:1 #, c-format msgid "License agreement" msgstr "Lisenziya sözləşməsi" #: ../../install_steps_interactive.pm:1 #, c-format msgid "An error occurred" msgstr "Bir xəta oldu" #: ../../install_steps_newt.pm:1 #, c-format msgid "" " / between elements | selects | next screen " msgstr "" " / irəli/geri | işarətlə | sonrakı ekran" #: ../../install_steps_newt.pm:1 #, c-format msgid "Mandrake Linux Installation %s" msgstr "Linuks-Mandrake Qurulumu %s" #: ../../install_steps.pm:1 #, c-format msgid "No floppy drive available" msgstr "Disket sürücü yoxdur" #: ../../install_steps.pm:1 #, c-format msgid "Welcome to %s" msgstr "%s Sisteminə Xoşgəlmişsiniz" #: ../../install_steps.pm:1 #, c-format msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" "Bəzi paketlər doğru olaraq qurulumu bitirmədi.\n" "cdrom sürücünüz ya da cdromunuz düzgün işləmir.\n" "Əvvəldən Linuks qurulu bir sistemdə \"rpm -qpl Mandrake/RPMS/*.rpm\"'yi\n" "istifadə edərək Cd-Rom'u yoxlayın.\n" #: ../../install_steps.pm:1 #, c-format msgid "Duplicate mount point %s" msgstr "%s bağlama nöqtəsini çoxalt" #: ../../install_steps.pm:1 #, c-format msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "Bir xəta oldu, fəqət necə düzəldiləcəyini bilmirəm.\n" "Davam edin, riski sizə aitdir!" #: ../../interactive.pm:1 ../../harddrake/sound.pm:1 #: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1 #: ../../standalone/service_harddrake:1 #, c-format msgid "Please wait" msgstr "Xahiş edirik gözləyin" #: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1 #: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1 #: ../../standalone/drakbackup:1 ../../standalone/draksec:1 #, c-format msgid "Ok" msgstr "Oldu" #: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1 #: ../../interactive/newt.pm:1 #, c-format msgid "Finish" msgstr "Qurtar" #: ../../interactive.pm:1 ../../standalone/draksec:1 #, c-format msgid "Basic" msgstr "" #: ../../interactive.pm:1 #, c-format msgid "Advanced" msgstr "Ətraflı" #: ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, fuzzy, c-format msgid "Remove" msgstr "Uzaq Çap Edici" #: ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, c-format msgid "Modify" msgstr "Təkmilləşdir" #: ../../interactive.pm:1 ../../interactive/gtk.pm:1 #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "Add" msgstr "Əlavə et" #: ../../interactive.pm:1 #, fuzzy, c-format msgid "Choose a file" msgstr "Monitorunuzu seçin" #: ../../keyboard.pm:1 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Right \"Windows\" key" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Left \"Windows\" key" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "\"Menu\" key" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "CapsLock key" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Control and Shift keys simultaneously" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Both Shift keys simultaneously" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Right Alt key" msgstr "" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Yugoslavian (latin)" msgstr "Yugoslavca (latın/kiril)" #: ../../keyboard.pm:1 #, c-format msgid "Vietnamese \"numeric row\" QWERTY" msgstr "Vyetnam dili \"numeric row\" QWERTY" #: ../../keyboard.pm:1 #, c-format msgid "US keyboard (international)" msgstr "Amerikan (US) klaviaturası (beynəlmiləl)" #: ../../keyboard.pm:1 #, c-format msgid "US keyboard" msgstr "Amerikan (US) klaviaturası" #: ../../keyboard.pm:1 #, c-format msgid "UK keyboard" msgstr "İngiliz (UK) klaviaturası" #: ../../keyboard.pm:1 #, c-format msgid "Ukrainian" msgstr "Ukrayna dili" #: ../../keyboard.pm:1 #, c-format msgid "Turkish (modern \"Q\" model)" msgstr "Türkcə (müasir \"Q\" klaviatura)" #: ../../keyboard.pm:1 #, c-format msgid "Turkish (traditional \"F\" model)" msgstr "Türkcə (ənənəvi \"F\" klaviatura)" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Tajik keyboard" msgstr "Thai klaviatura" #: ../../keyboard.pm:1 #, c-format msgid "Thai keyboard" msgstr "Thai klaviatura" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Tamil (Typewriter-layout)" msgstr "Ermenicə (yazı maşını)" #: ../../keyboard.pm:1 #, c-format msgid "Tamil (ISCII-layout)" msgstr "" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Serbian (cyrillic)" msgstr "Azərbaycanca (kiril)" #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTY)" msgstr "Slovakca (QWERTY)" #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTZ)" msgstr "Slovakca (QWERTZ)" #: ../../keyboard.pm:1 #, c-format msgid "Slovenian" msgstr "Slovencə" #: ../../keyboard.pm:1 #, c-format msgid "Swedish" msgstr "İsveçcə" #: ../../keyboard.pm:1 #, c-format msgid "Russian (Yawerty)" msgstr "Rusca (Yawerty)" #: ../../keyboard.pm:1 #, c-format msgid "Russian" msgstr "Rusca" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Romanian (qwerty)" msgstr "Rusca (Yawerty)" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Romanian (qwertz)" msgstr "Rusca (Yawerty)" #: ../../keyboard.pm:1 #, c-format msgid "Canadian (Quebec)" msgstr "Fransızca (Kanada/Quebec)" #: ../../keyboard.pm:1 #, c-format msgid "Portuguese" msgstr "Portuqalca" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwertz layout)" msgstr "Polyakca (QWERTZ sırası)" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwerty layout)" msgstr "Polyakca (QWERTY sırası)" #: ../../keyboard.pm:1 #, c-format msgid "Norwegian" msgstr "Norveçcə" #: ../../keyboard.pm:1 #, c-format msgid "Dutch" msgstr "Hollandiya dili" #: ../../keyboard.pm:1 #, c-format msgid "Maltese (US)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Maltese (UK)" msgstr "" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Mongolian (cyrillic)" msgstr "Azərbaycanca (kiril)" #: ../../keyboard.pm:1 #, c-format msgid "Myanmar (Burmese)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Macedonian" msgstr "Makedoniya dili" #: ../../keyboard.pm:1 #, c-format msgid "Malayalam" msgstr "" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Latvian" msgstr "Yeri" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"phonetic\" QWERTY" msgstr "Litvanya dili \"Fonetik\" QWERTY" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"number row\" QWERTY" msgstr "Litvanya dili \"number row\" QWERTY" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (new)" msgstr "Litvanya dili AZERTY (yeni)" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (old)" msgstr "Litvaniya dili AZERTY (köhnə)" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Laotian" msgstr "Yeri" #: ../../keyboard.pm:1 #, c-format msgid "Latin American" msgstr "Latın Amerika dili" #: ../../keyboard.pm:1 #, c-format msgid "Korean keyboard" msgstr "Koreya klaviaturası" #: ../../keyboard.pm:1 #, c-format msgid "Japanese 106 keys" msgstr "Yaponca 106 düyməli" #: ../../keyboard.pm:1 #, c-format msgid "Inuktitut" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Italian" msgstr "İtalyanca" #: ../../keyboard.pm:1 #, c-format msgid "Icelandic" msgstr "İzlandiya dili" #: ../../keyboard.pm:1 #, c-format msgid "Iranian" msgstr "Farsca" #: ../../keyboard.pm:1 #, c-format msgid "Israeli (Phonetic)" msgstr "İsrail (Fonetik)" #: ../../keyboard.pm:1 #, c-format msgid "Israeli" msgstr "İsrail" #: ../../keyboard.pm:1 #, c-format msgid "Croatian" msgstr "Xırvatca" #: ../../keyboard.pm:1 #, c-format msgid "Hungarian" msgstr "Macarca" #: ../../keyboard.pm:1 #, c-format msgid "Gurmukhi" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Gujarati" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Greek" msgstr "Yunanca" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Latin\" layout)" msgstr "Gürcü dili (\"Latın\" sırası)" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Russian\" layout)" msgstr "Gürcü dili (\"Rus\" sırası)" #: ../../keyboard.pm:1 #, c-format msgid "French" msgstr "Fransızca" #: ../../keyboard.pm:1 #, c-format msgid "Finnish" msgstr "Fincə" #: ../../keyboard.pm:1 #, c-format msgid "Spanish" msgstr "İspanca" #: ../../keyboard.pm:1 #, c-format msgid "Estonian" msgstr "Estoniya dili" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Dvorak (Swedish)" msgstr "Dvorak (US)" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (Norwegian)" msgstr "Dvorak (Norveçcə)" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (US)" msgstr "Dvorak (US)" #: ../../keyboard.pm:1 #, c-format msgid "Danish" msgstr "Danimarka dili" #: ../../keyboard.pm:1 #, c-format msgid "Devanagari" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "German (no dead keys)" msgstr "Almanca (ölü düymələr olmasın)" #: ../../keyboard.pm:1 #, c-format msgid "German" msgstr "Almanca" #: ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTY)" msgstr "Çex dili (QWERTY)" #: ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTZ)" msgstr "Çex dili (QWERTZ)" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (French layout)" msgstr "İsveçcə (Fransız sırası)" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (German layout)" msgstr "İsveçcə (Alman sırası)" #: ../../keyboard.pm:1 #, c-format msgid "Belarusian" msgstr "Belarusca" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Bosnian" msgstr "Estoniya dili" #: ../../keyboard.pm:1 #, c-format msgid "Brazilian (ABNT-2)" msgstr "Brazilya dili (ABNT-2)" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Bulgarian (BDS)" msgstr "Bulqarca" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Bulgarian (phonetic)" msgstr "Ermenicə (fonetik)" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Bengali" msgstr "fəallaşdır" #: ../../keyboard.pm:1 #, c-format msgid "Belgian" msgstr "Belçika dili" #: ../../keyboard.pm:1 #, c-format msgid "Azerbaidjani (latin)" msgstr "Azərbaycanca (latın)" #: ../../keyboard.pm:1 #, c-format msgid "Arabic" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (phonetic)" msgstr "Ermenicə (fonetik)" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (typewriter)" msgstr "Ermenicə (yazı maşını)" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (old)" msgstr "Ermenicə (köhnə) " #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Albanian" msgstr "Farsca" #: ../../keyboard.pm:1 #, c-format msgid "Polish" msgstr "Polyakca" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak" msgstr "Dvorak" #: ../../lang.pm:1 #, c-format msgid "Zimbabwe" msgstr "Zimbabve" #: ../../lang.pm:1 #, c-format msgid "Zambia" msgstr "Zambiya" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "South Africa" msgstr "Cənubi Afrika" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Serbia" msgstr "serial" #: ../../lang.pm:1 #, c-format msgid "Mayotte" msgstr "Mayot" #: ../../lang.pm:1 #, c-format msgid "Yemen" msgstr "Yəmən" #: ../../lang.pm:1 #, c-format msgid "Samoa" msgstr "Samoa" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Wallis and Futuna" msgstr "Vallis və Futuna Adaları" #: ../../lang.pm:1 #, c-format msgid "Vanuatu" msgstr "Vanuatu" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Vietnam" msgstr "Vyetnam" #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (U.S.)" msgstr "Virgin Adaları (ABŞ)" #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (British)" msgstr "Virgin Adaları (Britaniya)" #: ../../lang.pm:1 #, c-format msgid "Venezuela" msgstr "Venezuela" #: ../../lang.pm:1 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "Müqəddəs Vinsent və Qrenadin" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Vatican" msgstr "Yeri" #: ../../lang.pm:1 #, c-format msgid "Uzbekistan" msgstr "Özbəkistan" #: ../../lang.pm:1 #, c-format msgid "Uruguay" msgstr "Uruqvay" #: ../../lang.pm:1 #, c-format msgid "United States Minor Outlying Islands" msgstr "Birləşmiş Ştatlar yanı Kiçik Adalar" #: ../../lang.pm:1 #, c-format msgid "Uganda" msgstr "Uqanda" #: ../../lang.pm:1 #, c-format msgid "Ukraine" msgstr "Ukrayna" #: ../../lang.pm:1 #, c-format msgid "Tanzania" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Taiwan" msgstr "Tayland" #: ../../lang.pm:1 #, c-format msgid "Tuvalu" msgstr "Tuvalu" #: ../../lang.pm:1 #, c-format msgid "Trinidad and Tobago" msgstr "Trinidad və Tobaqo" #: ../../lang.pm:1 #, c-format msgid "Turkey" msgstr "Türkiyə" #: ../../lang.pm:1 #, c-format msgid "Tonga" msgstr "Tonqa" #: ../../lang.pm:1 #, c-format msgid "Tunisia" msgstr "Tunis" #: ../../lang.pm:1 #, c-format msgid "Turkmenistan" msgstr "Türkmənistan" #: ../../lang.pm:1 #, c-format msgid "East Timor" msgstr "Şərqi Timor" #: ../../lang.pm:1 #, c-format msgid "Tokelau" msgstr "Tokelo" #: ../../lang.pm:1 #, c-format msgid "Tajikistan" msgstr "Tacikistan" #: ../../lang.pm:1 #, c-format msgid "Thailand" msgstr "Tayland" #: ../../lang.pm:1 #, c-format msgid "Togo" msgstr "Toqo" #: ../../lang.pm:1 #, c-format msgid "French Southern Territories" msgstr "Cənubi Fransız Sahələri" #: ../../lang.pm:1 #, c-format msgid "Chad" msgstr "Çad" #: ../../lang.pm:1 #, c-format msgid "Turks and Caicos Islands" msgstr "Türk və Kaykos Adaları" #: ../../lang.pm:1 #, c-format msgid "Swaziland" msgstr "Svaziland" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Syria" msgstr "Surinam" #: ../../lang.pm:1 #, c-format msgid "El Salvador" msgstr "Elsalvador" #: ../../lang.pm:1 #, c-format msgid "Sao Tome and Principe" msgstr "Sao Tome və Prinsip" #: ../../lang.pm:1 #, c-format msgid "Suriname" msgstr "Surinam" #: ../../lang.pm:1 #, c-format msgid "Somalia" msgstr "Somali" #: ../../lang.pm:1 #, c-format msgid "Senegal" msgstr "Seneqal" #: ../../lang.pm:1 #, c-format msgid "San Marino" msgstr "San Marino" #: ../../lang.pm:1 #, c-format msgid "Sierra Leone" msgstr "Siera Lione" #: ../../lang.pm:1 #, c-format msgid "Slovakia" msgstr "Slovakiya" #: ../../lang.pm:1 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "Svalbard və Jan Mayen Adaları" #: ../../lang.pm:1 #, c-format msgid "Slovenia" msgstr "Sloveniya" #: ../../lang.pm:1 #, c-format msgid "Saint Helena" msgstr "Müqəddəs Helena" #: ../../lang.pm:1 #, c-format msgid "Singapore" msgstr "Sinqapur" #: ../../lang.pm:1 #, c-format msgid "Sudan" msgstr "Sudan" #: ../../lang.pm:1 #, c-format msgid "Seychelles" msgstr "Seyşel" #: ../../lang.pm:1 #, c-format msgid "Solomon Islands" msgstr "Solomon Adaları" #: ../../lang.pm:1 #, c-format msgid "Saudi Arabia" msgstr "Səudiyyə Ərəbistan" #: ../../lang.pm:1 #, c-format msgid "Rwanda" msgstr "Rvanda" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Russia" msgstr "Rusca" #: ../../lang.pm:1 #, c-format msgid "Romania" msgstr "Ruminıya" #: ../../lang.pm:1 #, c-format msgid "Reunion" msgstr "Reyunion" #: ../../lang.pm:1 #, c-format msgid "Qatar" msgstr "Katar" #: ../../lang.pm:1 #, c-format msgid "Palau" msgstr "Palau" #: ../../lang.pm:1 #, c-format msgid "Paraguay" msgstr "Paraqvay" #: ../../lang.pm:1 #, c-format msgid "Portugal" msgstr "Portuqaliya" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Palestine" msgstr "Paket seçkilərini saxla" #: ../../lang.pm:1 #, c-format msgid "Puerto Rico" msgstr "Porto Riko" #: ../../lang.pm:1 #, c-format msgid "Pitcairn" msgstr "Pitkairn" #: ../../lang.pm:1 #, c-format msgid "Saint Pierre and Miquelon" msgstr "Müqəddəs Pyer və Migelion" #: ../../lang.pm:1 #, c-format msgid "Poland" msgstr "Polşa" #: ../../lang.pm:1 #, c-format msgid "Pakistan" msgstr "Pakistan" #: ../../lang.pm:1 #, c-format msgid "Philippines" msgstr "Filippin" #: ../../lang.pm:1 #, c-format msgid "Papua New Guinea" msgstr "Papua Yeni Qvineya" #: ../../lang.pm:1 #, c-format msgid "French Polynesia" msgstr "Fransız Poloneziyası" #: ../../lang.pm:1 #, c-format msgid "Peru" msgstr "Peru" #: ../../lang.pm:1 #, c-format msgid "Panama" msgstr "Panama" #: ../../lang.pm:1 #, c-format msgid "Oman" msgstr "Oman" #: ../../lang.pm:1 #, c-format msgid "New Zealand" msgstr "Yeni Zellandiya" #: ../../lang.pm:1 #, c-format msgid "Niue" msgstr "Niu" #: ../../lang.pm:1 #, c-format msgid "Nauru" msgstr "Nauru" #: ../../lang.pm:1 #, c-format msgid "Nepal" msgstr "Nepal" #: ../../lang.pm:1 #, c-format msgid "Nicaragua" msgstr "Nikaraqua" #: ../../lang.pm:1 #, c-format msgid "Nigeria" msgstr "Nigeriya" #: ../../lang.pm:1 #, c-format msgid "Norfolk Island" msgstr "Norfolk Adaları" #: ../../lang.pm:1 #, c-format msgid "Niger" msgstr "Niger" #: ../../lang.pm:1 #, c-format msgid "New Caledonia" msgstr "Yeni Kaledoniya" #: ../../lang.pm:1 #, c-format msgid "Namibia" msgstr "Namibiya" #: ../../lang.pm:1 #, c-format msgid "Mozambique" msgstr "Mozambiq" #: ../../lang.pm:1 #, c-format msgid "Malaysia" msgstr "Malayziya" #: ../../lang.pm:1 #, c-format msgid "Mexico" msgstr "Meksika" #: ../../lang.pm:1 #, c-format msgid "Malawi" msgstr "Malavi" #: ../../lang.pm:1 #, c-format msgid "Maldives" msgstr "Maldiv" #: ../../lang.pm:1 #, c-format msgid "Mauritius" msgstr "Maurit" #: ../../lang.pm:1 #, c-format msgid "Malta" msgstr "Malta" #: ../../lang.pm:1 #, c-format msgid "Montserrat" msgstr "Montserrat" #: ../../lang.pm:1 #, c-format msgid "Mauritania" msgstr "Mavritaniya" #: ../../lang.pm:1 #, c-format msgid "Martinique" msgstr "Martiniq" #: ../../lang.pm:1 #, c-format msgid "Northern Mariana Islands" msgstr "Şimali Marian Adaları" #: ../../lang.pm:1 #, c-format msgid "Mongolia" msgstr "Monqolustan" #: ../../lang.pm:1 #, c-format msgid "Myanmar" msgstr "Myanmar" #: ../../lang.pm:1 #, c-format msgid "Mali" msgstr "Mali" #: ../../lang.pm:1 #, c-format msgid "Macedonia" msgstr "Makedoniya" #: ../../lang.pm:1 #, c-format msgid "Marshall Islands" msgstr "Marşal Adaları" #: ../../lang.pm:1 #, c-format msgid "Madagascar" msgstr "Madaqaskar" #: ../../lang.pm:1 #, c-format msgid "Moldova" msgstr "Moldova" #: ../../lang.pm:1 #, c-format msgid "Monaco" msgstr "Monako" #: ../../lang.pm:1 #, c-format msgid "Morocco" msgstr "Mərakeş" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Libya" msgstr "Liberiya" #: ../../lang.pm:1 #, c-format msgid "Latvia" msgstr "Latviya" #: ../../lang.pm:1 #, c-format msgid "Luxembourg" msgstr "Lüksemburq" #: ../../lang.pm:1 #, c-format msgid "Lithuania" msgstr "Litvaniya" #: ../../lang.pm:1 #, c-format msgid "Lesotho" msgstr "Lesoto" #: ../../lang.pm:1 #, c-format msgid "Liberia" msgstr "Liberiya" #: ../../lang.pm:1 #, c-format msgid "Sri Lanka" msgstr "Şri Lanka" #: ../../lang.pm:1 #, c-format msgid "Liechtenstein" msgstr "Lixtenşteyn" #: ../../lang.pm:1 #, c-format msgid "Saint Lucia" msgstr "Müqəddəs Lusiya" #: ../../lang.pm:1 #, c-format msgid "Lebanon" msgstr "Livan" #: ../../lang.pm:1 #, c-format msgid "Laos" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Kazakhstan" msgstr "Qazaxstan" #: ../../lang.pm:1 #, c-format msgid "Cayman Islands" msgstr "Kayman Adaları" #: ../../lang.pm:1 #, c-format msgid "Kuwait" msgstr "Küveyt" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Korea" msgstr "Daha Çox" #: ../../lang.pm:1 #, c-format msgid "Korea (North)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Saint Kitts and Nevis" msgstr "Müqəddəs Kit və Nevis" #: ../../lang.pm:1 #, c-format msgid "Comoros" msgstr "Komor" #: ../../lang.pm:1 #, c-format msgid "Kiribati" msgstr "Kiribati" #: ../../lang.pm:1 #, c-format msgid "Cambodia" msgstr "Kambodiya" #: ../../lang.pm:1 #, c-format msgid "Kyrgyzstan" msgstr "Qırğızıstan" #: ../../lang.pm:1 #, c-format msgid "Kenya" msgstr "Kenya" #: ../../lang.pm:1 #, c-format msgid "Japan" msgstr "Yaponiya" #: ../../lang.pm:1 #, c-format msgid "Jordan" msgstr "İordaniya" #: ../../lang.pm:1 #, c-format msgid "Jamaica" msgstr "Yamayka" #: ../../lang.pm:1 #, c-format msgid "Iceland" msgstr "İslandiya" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Iran" msgstr "İraq" #: ../../lang.pm:1 #, c-format msgid "Iraq" msgstr "İraq" #: ../../lang.pm:1 #, c-format msgid "British Indian Ocean Territory" msgstr "Britaniya Hind Okeanı Sahəsi" #: ../../lang.pm:1 #, c-format msgid "India" msgstr "Hindistan" #: ../../lang.pm:1 #, c-format msgid "Israel" msgstr "İsrail" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "Ireland" msgstr "İzlandiya dili" #: ../../lang.pm:1 #, c-format msgid "Indonesia" msgstr "İndoneziya" #: ../../lang.pm:1 #, c-format msgid "Hungary" msgstr "Macarıstan" #: ../../lang.pm:1 #, c-format msgid "Haiti" msgstr "Haiti" #: ../../lang.pm:1 #, c-format msgid "Croatia" msgstr "Xırvatıstan" #: ../../lang.pm:1 #, c-format msgid "Honduras" msgstr "Honduras" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Heard and McDonald Islands" msgstr "Hird Adası və Mkdonald Adaları" #: ../../lang.pm:1 #, c-format msgid "Hong Kong" msgstr "Honq Konq" #: ../../lang.pm:1 #, c-format msgid "Guyana" msgstr "Quyana" #: ../../lang.pm:1 #, c-format msgid "Guinea-Bissau" msgstr "Qvineya Bissau" #: ../../lang.pm:1 #, c-format msgid "Guam" msgstr "Quam" #: ../../lang.pm:1 #, c-format msgid "Guatemala" msgstr "Quatemala" #: ../../lang.pm:1 #, fuzzy, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "Cinubi Georgiya və Cənubi Sandviç Adası" #: ../../lang.pm:1 #, c-format msgid "Equatorial Guinea" msgstr "Ekvatorial Qvineya" #: ../../lang.pm:1 #, c-format msgid "Guadeloupe" msgstr "Quadelup" #: ../../lang.pm:1 #, c-format msgid "Guinea" msgstr "Qvineya" #: ../../lang.pm:1 #, c-format msgid "Gambia" msgstr "Qambiya" #: ../../lang.pm:1 #, c-format msgid "Greenland" msgstr "Qrinland" #: ../../lang.pm:1 #, c-format msgid "Gibraltar" msgstr "Gibraltar" #: ../../lang.pm:1 #, c-format msgid "Ghana" msgstr "Qana" #: ../../lang.pm:1 #, c-format msgid "French Guiana" msgstr "Fransız Gvineyası" #: ../../lang.pm:1 #, c-format msgid "Georgia" msgstr "Gürcüstan" #: ../../lang.pm:1 #, c-format msgid "Grenada" msgstr "Qrenada" #: ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "United Kingdom" msgstr "Birləşmiş Krallıq" #: ../../lang.pm:1 #, c-format msgid "Gabon" msgstr "Qabon" #: ../../lang.pm:1 #, c-format msgid "Faroe Islands" msgstr "Faro Adaları" #: ../../lang.pm:1 #, c-format msgid "Micronesia" msgstr "Mikroneziya" #: ../../lang.pm:1 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "Fokland Adaları (Malvin)" #: ../../lang.pm:1 #, c-format msgid "Fiji" msgstr "Fici" #: ../../lang.pm:1 #, c-format msgid "Finland" msgstr "Finlandiya" #: ../../lang.pm:1 #, c-format msgid "Ethiopia" msgstr "Efiopiya" #: ../../lang.pm:1 #, c-format msgid "Spain" msgstr "İspaniya" #: ../../lang.pm:1 #, c-format msgid "Eritrea" msgstr "Eritre" #: ../../lang.pm:1 #, c-format msgid "Western Sahara" msgstr "Qərbi Saxara" #: ../../lang.pm:1 #, c-format msgid "Egypt" msgstr "Misir" #: ../../lang.pm:1 #, c-format msgid "Estonia" msgstr "Estoniya" #: ../../lang.pm:1 #, c-format msgid "Ecuador" msgstr "Ekvador" #: ../../lang.pm:1 #, c-format msgid "Algeria" msgstr "Əlcəzair" #: ../../lang.pm:1 #, c-format msgid "Dominican Republic" msgstr "Dominikan Respublikası" #: ../../lang.pm:1 #, c-format msgid "Dominica" msgstr "Dominik" #: ../../lang.pm:1 #, c-format msgid "Denmark" msgstr "Danimarka" #: ../../lang.pm:1 #, c-format msgid "Djibouti" msgstr "Cibuti" #: ../../lang.pm:1 #, c-format msgid "Cyprus" msgstr "Kipr (Yunan və Türk) " #: ../../lang.pm:1 #, c-format msgid "Christmas Island" msgstr "Kristmas Adası" #: ../../lang.pm:1 #, c-format msgid "Cape Verde" msgstr "Keyp Verde" #: ../../lang.pm:1 #, c-format msgid "Cuba" msgstr "Kuba" #: ../../lang.pm:1 #, c-format msgid "Colombia" msgstr "Kolumbiya" #: ../../lang.pm:1 #, c-format msgid "China" msgstr "Çin" #: ../../lang.pm:1 #, c-format msgid "Cameroon" msgstr "Kamerun" #: ../../lang.pm:1 #, c-format msgid "Chile" msgstr "Çili" #: ../../lang.pm:1 #, c-format msgid "Cook Islands" msgstr "Kuku Adaları" #: ../../lang.pm:1 #, c-format msgid "Cote d'Ivoire" msgstr "Kot Divuar" #: ../../lang.pm:1 #, c-format msgid "Switzerland" msgstr "İsveçrə" #: ../../lang.pm:1 #, c-format msgid "Congo (Brazzaville)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Central African Republic" msgstr "Mərkəzi Afrika Respublikası" #: ../../lang.pm:1 #, c-format msgid "Congo (Kinshasa)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Cocos (Keeling) Islands" msgstr "Kokos Adası" #: ../../lang.pm:1 #, c-format msgid "Canada" msgstr "Kanada" #: ../../lang.pm:1 #, c-format msgid "Belize" msgstr "Beliz" #: ../../lang.pm:1 #, c-format msgid "Belarus" msgstr "Belarusiya" #: ../../lang.pm:1 #, c-format msgid "Botswana" msgstr "Botsvana" #: ../../lang.pm:1 #, c-format msgid "Bouvet Island" msgstr "Buvet Adası" #: ../../lang.pm:1 #, c-format msgid "Bhutan" msgstr "Butan" #: ../../lang.pm:1 #, c-format msgid "Bahamas" msgstr "Bahama" #: ../../lang.pm:1 #, c-format msgid "Brazil" msgstr "Braziliya" #: ../../lang.pm:1 #, c-format msgid "Bolivia" msgstr "Boliviya" #: ../../lang.pm:1 #, c-format msgid "Brunei Darussalam" msgstr "Bruney Darüssəlim" #: ../../lang.pm:1 #, c-format msgid "Bermuda" msgstr "Bermuda" #: ../../lang.pm:1 #, c-format msgid "Benin" msgstr "Benin" #: ../../lang.pm:1 #, c-format msgid "Burundi" msgstr "Burundi" #: ../../lang.pm:1 #, c-format msgid "Bahrain" msgstr "Bahreyn" #: ../../lang.pm:1 #, c-format msgid "Bulgaria" msgstr "Bolqarıstan" #: ../../lang.pm:1 #, c-format msgid "Burkina Faso" msgstr "Burkina Faso" #: ../../lang.pm:1 #, c-format msgid "Bangladesh" msgstr "Banqladeş" #: ../../lang.pm:1 #, c-format msgid "Barbados" msgstr "Barbados" #: ../../lang.pm:1 #, c-format msgid "Bosnia and Herzegovina" msgstr "Bosniya və Herzoqovina" #: ../../lang.pm:1 #, c-format msgid "Azerbaijan" msgstr "Azərbaycan" #: ../../lang.pm:1 #, c-format msgid "Aruba" msgstr "Aruba" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "Australia" msgstr "serial" #: ../../lang.pm:1 #, c-format msgid "American Samoa" msgstr "Amerikan Samoa" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Argentina" msgstr "Argentina" #: ../../lang.pm:1 #, c-format msgid "Antarctica" msgstr "Antarktika" #: ../../lang.pm:1 #, c-format msgid "Angola" msgstr "Anqola" #: ../../lang.pm:1 #, c-format msgid "Netherlands Antilles" msgstr "Holland Antilləri" #: ../../lang.pm:1 #, c-format msgid "Armenia" msgstr "Ermənistan" #: ../../lang.pm:1 #, c-format msgid "Albania" msgstr "Albaniya" #: ../../lang.pm:1 #, c-format msgid "Anguilla" msgstr "Anquilla" #: ../../lang.pm:1 #, c-format msgid "Antigua and Barbuda" msgstr "Antiq və Barbuda" #: ../../lang.pm:1 #, c-format msgid "United Arab Emirates" msgstr "Birləşmiş Ərəb Əmirlikləri" #: ../../lang.pm:1 #, c-format msgid "Andorra" msgstr "Andorra" #: ../../lang.pm:1 #, c-format msgid "Afghanistan" msgstr "Əfqanıstan" #: ../../lang.pm:1 #, c-format msgid "default:LTR" msgstr "default:LTR" #: ../../loopback.pm:1 #, c-format msgid "Circular mounts %s\n" msgstr "Dairəvi bağlama %s\n" #: ../../lvm.pm:1 #, c-format msgid "Remove the logical volumes first\n" msgstr "Məntiqi ciltləri birinci olaraq sil\n" #: ../../modules.pm:1 #, c-format msgid "" "PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." msgstr "" #: ../../mouse.pm:1 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "TƏKƏRİ OYNADIN!" #: ../../mouse.pm:1 #, c-format msgid "To activate the mouse," msgstr "Siçanınızı işə salmaq üçün," #: ../../mouse.pm:1 #, c-format msgid "Please test the mouse" msgstr "Xahiş edirik siçanınızı seçin" #: ../../mouse.pm:1 #, c-format msgid "No mouse" msgstr "Siçansızs" #: ../../mouse.pm:1 #, c-format msgid "none" msgstr "heç biri" #: ../../mouse.pm:1 #, c-format msgid "3 buttons" msgstr "3 düyməli" #: ../../mouse.pm:1 #, c-format msgid "2 buttons" msgstr "2 düyməli" #: ../../mouse.pm:1 #, c-format msgid "1 button" msgstr "1 düymə" #: ../../mouse.pm:1 #, c-format msgid "busmouse" msgstr "busmouse" #: ../../mouse.pm:1 #, c-format msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: ../../mouse.pm:1 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech mouse (serial ya da köhnə C7 növü)" #: ../../mouse.pm:1 #, c-format msgid "MM HitTablet" msgstr "MM HitTablet" #: ../../mouse.pm:1 #, c-format msgid "MM Series" msgstr "MM Series" #: ../../mouse.pm:1 #, c-format msgid "Genius NetMouse" msgstr "Genius NetMouse" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: ../../mouse.pm:1 #, c-format msgid "Logitech CC Series" msgstr "Logitech CC Series" #: ../../mouse.pm:1 #, c-format msgid "Mouse Systems" msgstr "Mouse Systems" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: ../../mouse.pm:1 #, c-format msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: ../../mouse.pm:1 #, c-format msgid "Generic 3 Button Mouse" msgstr "Sıravi 3 Düyməli Siçan" #: ../../mouse.pm:1 #, c-format msgid "Generic 2 Button Mouse" msgstr "Sıravi 2 Düyməli Siçan" #: ../../mouse.pm:1 #, c-format msgid "serial" msgstr "serial" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Microsoft Explorer" msgstr "Microsoft IntelliMouse" #: ../../mouse.pm:1 #, c-format msgid "Wheel" msgstr "Çərx" #: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Generic" msgstr "Ümumi" #: ../../mouse.pm:1 #, c-format msgid "Genius NetScroll" msgstr "Genius NetScroll" #: ../../mouse.pm:1 #, c-format msgid "GlidePoint" msgstr "GlidePoint" #: ../../mouse.pm:1 #, c-format msgid "Generic PS2 Wheel Mouse" msgstr "Sıravi PS2 Çərxli Siçan" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: ../../mouse.pm:1 ../../security/level.pm:1 #, c-format msgid "Standard" msgstr "Standart" #: ../../mouse.pm:1 #, c-format msgid "Sun - Mouse" msgstr "Sun - Siçan" #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Toggle between flat and group sorted" msgstr "Otaq və grup sıralaması arasında gəz" #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Collapse Tree" msgstr "Ağacı Qapat" #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Expand Tree" msgstr "Ağacı Aç" #: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Info" msgstr "Mə'lumat" #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Is this correct?" msgstr "Doğrudur?" #: ../../my_gtk.pm:1 #, c-format msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "Error writing to file %s" msgstr "%s faylına yazarkən xəta oldu" #: ../../partition_table.pm:1 #, c-format msgid "Bad backup file" msgstr "Xətalı yedəkləmə faylı" #: ../../partition_table.pm:1 #, c-format msgid "Restoring from file %s failed: %s" msgstr "%s faylından qurtarılışda xəta: %s" #: ../../partition_table.pm:1 #, c-format msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "Bölmə cədvəlinizdə bir boşluq var, amma o da işlədilə bilməz.\n" "Bu boşluğu, birinci bölmənizi en yaxınındakı genişlədilmiş bölməyə " "daşıyaraq\n" "məsələni həll edə bilərsiniz." #: ../../partition_table.pm:1 #, c-format msgid "Extended partition not supported on this platform" msgstr "Bu platformda genişlədilmiş bölmələr dəstəklənmir" #: ../../partition_table.pm:1 #, c-format msgid "mount failed: " msgstr "bağlama iflas etdi: " #: ../../pkgs.pm:1 #, c-format msgid "maybe" msgstr "bəlkə" #: ../../pkgs.pm:1 #, c-format msgid "nice" msgstr "gözəl" #: ../../pkgs.pm:1 #, c-format msgid "very nice" msgstr "əla" #: ../../pkgs.pm:1 #, c-format msgid "important" msgstr "vacib" #: ../../pkgs.pm:1 #, c-format msgid "must have" msgstr "alınmalı" #: ../../raid.pm:1 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "%d səviyyə RAID üçün çatmayan sayda disk bölməsi\n" #: ../../raid.pm:1 #, c-format msgid "mkraid failed" msgstr "mkraid iflas etdi" #: ../../raid.pm:1 #, c-format msgid "mkraid failed (maybe raidtools are missing?)" msgstr "mkraid iflas etdi (raidtools əksik ola bilər mi?)" #: ../../raid.pm:1 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "Şəkilləndirilmiş RAID md%d-yə disk bölməsi əlavə edilə bilinmədi" #: ../../services.pm:1 #, fuzzy, c-format msgid "Stop" msgstr "Sektor" #: ../../services.pm:1 #, fuzzy, c-format msgid "Start" msgstr "Hal:" #: ../../services.pm:1 #, c-format msgid "On boot" msgstr "Açılışda" #: ../../services.pm:1 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" "Bu xidmət haqqında təəsüf ki,\n" "əlavə mə'lumat yoxdur." #: ../../services.pm:1 #, c-format msgid "Services and deamons" msgstr "Xidmətlər və vasitələr" #: ../../services.pm:1 #, c-format msgid "stopped" msgstr "dayandırılıb" #: ../../services.pm:1 #, c-format msgid "running" msgstr "işləmir" #: ../../services.pm:1 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "Açılışda avtomatik olaraq başlayacaq xidmətləri seçin" #: ../../services.pm:1 #, fuzzy, c-format msgid "Database Server" msgstr "Databeyz" #: ../../services.pm:1 #, fuzzy, c-format msgid "Remote Administration" msgstr "Uzaq Çap Edici (lpd) Seçənəkləri" #: ../../services.pm:1 #, c-format msgid "File sharing" msgstr "" #: ../../services.pm:1 #, c-format msgid "Internet" msgstr "İnternet" #: ../../services.pm:1 #, fuzzy, c-format msgid "Printing" msgstr "Çap Edici" #: ../../services.pm:1 #, c-format msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "" "X Font Vericisini açılışda işə salar (Bu, XFree icrası üçün məcburidir)." #: ../../services.pm:1 #, c-format msgid "Load the drivers for your usb devices." msgstr "USB avadanlığınız üçün sürücüləri yükləyin." #: ../../services.pm:1 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "Syslog, bir çox vasitənin ismarıclarını müxtəlif sistem qeydlərində\n" "tutmalarına imkan verər. Syslog'un hər zaman işləməsi\n" "yaxşı fikirdir." #: ../../services.pm:1 #, c-format msgid "Launch the sound system on your machine" msgstr "Kompüterinizdə səs sistemı başladın" #: ../../services.pm:1 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" "rwho protokolu, uzaq istifadəçilərin, rwho vasitəsi işlədən bir kompüterdə\n" "olan bütün istifadəçiləri görmələrina imkan verər." #: ../../services.pm:1 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "rusers protokolu bir şəbəkədəkı istifadəçilərin o şəbəkədəkı kompüterlərdə\n" "işləyən istifadəçiləri görməsinə imkan verər." #: ../../services.pm:1 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "rstat protokolu bir şəbəkədəkı istifadəçilərin o şəbəkədəkı hər hansı bir\n" "kompüter haqqındakı qabiliyyət ölçüləri ala bilmələrinə imkan verər." #: ../../services.pm:1 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "routed vasitəsi avtomatik IP router cədvəlinin RIP protokolu tərəfindən\n" "yenilənməsinə imkan verər. RIP əsasən kiçik şəbəkələrdə istifadə edilir, " "daha böyük\n" "şəbəkələrdə daha qarışıq routing protokollarına ehtiyacı vardır." #: ../../services.pm:1 #, fuzzy, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle" #: ../../services.pm:1 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "Yüksək keyfiyyət təsadüfi rəqəm istehsal edən sistem entropi hovuzunun \n" "saxlanması və yenidən köhnə halına gətirilməsinə imkan verər." #: ../../services.pm:1 #, fuzzy, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" "Posfix, elektronik məktubların bir kompüterdən digərinə yollayan \n" "Elektronik Məktub Yollama Vasitəsidir." #: ../../services.pm:1 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "portmapper, NFS ve NIS kimi protokollar tərəfindən istifadə edilən RPC \n" "bağlantılarını təşkilatlandırır. Portmap vericisi RPC mexanizmini işlədən\n" "protokollarla xidmət edən kompüterlərdə qurulmalıdır və işlədilməlidir." #: ../../services.pm:1 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" "PCMCIA dəstəyi, laptoplarda eternet və modem kimi avadanlıqların " "dəstəklənməsinə imkan verər.\n" "Qurulmadığı vaxtda açılışda işləməz, işləməsinə ehtiyac olmayan\n" "kompüterlərdə qurulu olması problem yaratmaz." #: ../../services.pm:1 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "OKI 4w və uyğun Windows çap edicilərini dəstəklə." #: ../../services.pm:1 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" "Açılışda XFree və konsolda numlock düyməsini\n" "avtomatik olaraq aç." #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS TCP/IP şəbəkələrində fayl bölüşülməsi üçün istifadə edilən məşhur bir \n" "protokoldur. Bu xidmət NFS fayl qıfılı istifadəsinə imkan verər." #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS TCP/IP şəbəkələrində fayl bölüşülməsi üçün istifadə edilən məşhur bir " "protokoldur.\n" "Bu xidmət, /etc/exports faylında qurğuları olan NFS vericisinin\n" "istifadəsinə imkan verər." #: ../../services.pm:1 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "Açılış sırasında başlamaq üçün qurulmuş bütün şəbəkə axtar üzlərini " "fəallaşdırır ya da qapatır." #: ../../services.pm:1 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "Bütün Şəbəkə Fayl Sistemlərini (NFS), SMB (Lan Manager/Windows), və \n" "NCP (NetWare) bağlama nöqtələrini bağlar və ayırır." #: ../../services.pm:1 #, fuzzy, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "named (BIND) verici adlarını IP ünvanlarına çevirən\n" "Sahə Adı Vericisidir(DNS)." #: ../../services.pm:1 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" "Linuks Virtual Verici, yüksək qabiliyyətli vericilər qurmaq üçün işlədilir." #: ../../services.pm:1 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd, lpr'nin düzgün olaraq işləməsi üçün lazımi çap edici vasitəsidir.\n" "lpd əsasən, çap vəzifələrini idarə edən və onları çap ediciyə göndərən " "vericidir." #: ../../services.pm:1 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" "Linuxconf sistem qurğularınızı idarə edən proqramları\n" "müxtəlif vəzifələri açılışda icra edər." #: ../../services.pm:1 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "Texniki avadanlığın açılışda avtomatik təsbiti və qurulması." #: ../../services.pm:1 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" "/usr/include/linux/{autoconf,version}.h üçün \n" "/boot-da avtomatik çəkirdək başlığı yaradılması." #: ../../services.pm:1 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "Bu paket /etc/sysconfig/keyboard'dakı seçili klaviatura düzülüşünü yüklər.\n" "Hansı klaviatura düzülüşü istifadə ediləcəyi kbdconfig ilə seçilir.\n" "Bu, mandrake qurulan bir çox kompüterdə fəal buraxılmalıdır." #: ../../services.pm:1 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" "Linuks 2.2 seriyası çəkirdəklərində firewall\n" "qurmaq üçün üçün paket süzülməsini başlat." #: ../../services.pm:1 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "Internet superserver daemon (qısaca inetd ) bir çox \n" "başqa internet xidmətcisini lazım gəldiyi zaman işa salır. İçində telnet, " "ftp, rsh və rlogin kimi proqramın olduğu xidmətləri işə salmaqla məs'uldur.\n" "inetd-ni sistemden çıxarmaq, onun məs'ul olduğu bütün xidmətləri\n" "rədd etmək mənasını daşıyır." #: ../../services.pm:1 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" "Apache bir World Wide Web vericisidir. HTML faylları və CGI verilməsi üçün " "istifadə edilir." #: ../../services.pm:1 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" "HardDrake texniki tə'minat sınağı aparar və onları bir ön quraşdırmadan " "keçirər." #: ../../services.pm:1 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM, Midnight Commander kimi mətn əsaslı tə'minatlara siçan dəstəyi əlavə " "edər.\n" "Ayrıca konsolda siçanla kəsmə və yapışdırma əməliyyatlarına da imkan verər.\n" "Konsolda pop-up menyu dəstəyi verər." #: ../../services.pm:1 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "cron, istifadəçilərə xüsusi əmrləri periodik olaraq işə sala bilən\n" "standart bir UNIX proqramıdır. vixie cron, standart cron'a əlavə edilmiş bir " "çox\n" "yeni xüsusiyyət daxildir." #: ../../services.pm:1 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "at əmri, zamanlanan əmrləri işləmələri lazım gələn vaxtda işlədir.\n" "Sistem yükü lazımi qədər alçaq olduğunda yığma əmrləri işlədilir." #: ../../services.pm:1 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "apmd batareya vəziyyətini izləmək üçün və syslog aracılığıyla bunun qeydini " "tutmaq üçün istifadə edilir.\n" "Ayrıca batareya azaldığında sistemi qapatmaq üçün də istifadə edilir." #: ../../services.pm:1 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "Anakron, periodik əmr zamanlayıcısı" #: ../../services.pm:1 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "ALSA səs sistemini (Advanced Linux Sound Architecture) başlat" #: ../../standalone.pm:1 #, fuzzy, c-format msgid "Installing packages..." msgstr "%s paketi qurulur" #: ../../standalone.pm:1 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation don't ask first confirmation question in " "MandrakeUpdate mode\n" " --no-verify-rpm don't verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" #: ../../standalone.pm:1 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : don't be interactive. To be used with (dis)connect." msgstr "" #: ../../standalone.pm:1 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "" #: ../../standalone.pm:1 #, fuzzy, c-format msgid "[keyboard]" msgstr "Klaviatura" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]...\n" "Mandrake Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "Font Importation and monitoring " "application \n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--strong : strong verification of font.\n" "--install : accept any font file and any directry.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrake tools\n" " --incident - program should be one of mandrake tools" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Exit install" msgstr "Qurulumdan çıx" #: ../../steps.pm:1 #, fuzzy, c-format msgid "Install updates" msgstr "Sistemi qur" #: ../../steps.pm:1 #, c-format msgid "Configure services" msgstr "Xidmətləri qur" #: ../../steps.pm:1 #, c-format msgid "Configure X" msgstr "X qur" #: ../../steps.pm:1 #, c-format msgid "Install bootloader" msgstr "Sistem yükləyicini qur" #: ../../steps.pm:1 #, c-format msgid "Configure networking" msgstr "Şəbəkəni qur" #: ../../steps.pm:1 #, c-format msgid "Add a user" msgstr "İstifadəçi əlavə et" #: ../../steps.pm:1 #, c-format msgid "Root password" msgstr "Root parolunu qur" #: ../../steps.pm:1 #, c-format msgid "Install system" msgstr "Sistemi qur" #: ../../steps.pm:1 #, c-format msgid "Choose packages to install" msgstr "Qurulacaq paketləri seçin" #: ../../steps.pm:1 #, c-format msgid "Format partitions" msgstr "Bölmə şəkilləndirilməsi" #: ../../steps.pm:1 #, fuzzy, c-format msgid "Partitioning" msgstr "Çap Edici" #: ../../steps.pm:1 #, c-format msgid "Choose your keyboard" msgstr "Klaviaturanızı seçin" #: ../../steps.pm:1 #, c-format msgid "Select installation class" msgstr "Quruluş sinifini seçin" #: ../../steps.pm:1 #, c-format msgid "Hard drive detection" msgstr "Sabit disk seçkisi" #: ../../steps.pm:1 #, c-format msgid "Configure mouse" msgstr "Siçan qurğuları" #: ../../steps.pm:1 #, c-format msgid "License" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Language" msgstr "İşlətdiyiniz dili seçin" #: ../../ugtk2.pm:1 #, c-format msgid "utopia 25" msgstr "" #: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1 #: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfont:1 ../../standalone/net_monitor:1 #, c-format msgid "OK" msgstr "Oldu" #: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1 #, c-format msgid "logdrake" msgstr "logdrake" #: ../../ugtk.pm:1 #, c-format msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" #: ../../Xconfig/card.pm:1 #, c-format msgid "Xpmac (installation display driver)" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "Sizin kartınızın XFree %s ilə 3D dəstəyi ola bilər.\n" "DİQQƏT! BU SINAQ MƏRHƏLƏSINDƏDIR VƏ KOMPÜTERİNİZ DONDURA BILƏR." #: ../../Xconfig/card.pm:1 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "SINAQ MƏRHƏLƏSİNDƏKİ 3D sür'ətləndirmə dəstəkli XFree %s" #: ../../Xconfig/card.pm:1 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "Sizin kartınızın XFree %s ilə 3D dəstəyi ola bilər." #: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "3D avadanlıq sür'ətləndirməsi ilə XFree %s" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Sizin kartınızın 3D sür'ətləndirmə dəstəyi ola bilər, amma sadecə olaraq " "XFree %s\n" "ilə düzgün işləyər.\n" "DİQQƏT! BU SINAQ MƏRHƏLƏSINDƏDIR VƏ KOMPÜTERİNİZ DONDURA BILƏR.\n" "Sizin kartınıza XFree %s tərəfindən dəstək verilir ve bu 2D üçün daha yaxşı " "bir seçki olar." #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Sizin kartınızın 3D sür'ətləndirmə dəstəyi ola bilər, amma sadecə olaraq " "XFree %s\n" "ilə düzgün işləyər.\n" "Sizin kartınıza XFree %s tərəfindən dəstək verilir ve bu 2D üçün daha yaxşı " "bir fikir olar." #: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s" msgstr "XFree %s" #: ../../Xconfig/card.pm:1 #, fuzzy, c-format msgid "Configure only card \"%s\"%s" msgstr "Təkcə \"%s\" kartını qur (%s)" #: ../../Xconfig/card.pm:1 #, c-format msgid "Use Xinerama extension" msgstr "Xinerama ifadələrini işlət" #: ../../Xconfig/card.pm:1 #, c-format msgid "Configure all heads independently" msgstr "Bütün başlıqları ayrı ayrı quraşdır" #: ../../Xconfig/card.pm:1 #, c-format msgid "Which configuration of XFree do you want to have?" msgstr "Necə bir XFree qurğusunu istəyirsiniz?" #: ../../Xconfig/card.pm:1 #, c-format msgid "XFree configuration" msgstr "XFree quraşdırılması" #: ../../Xconfig/card.pm:1 #, c-format msgid "Select the memory size of your graphics card" msgstr "Ekran kartınızın yaddaş böyüklüyünü seçin" #: ../../Xconfig/card.pm:1 #, fuzzy, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" "Sizin sisteminiz çoxlu başlıq quraşdırmasını dəstəkləyir.\n" "Nə etmək istəyirsiniz?" #: ../../Xconfig/card.pm:1 #, c-format msgid "Multi-head configuration" msgstr "Çoxlu Başlıq quraşdırılması" #: ../../Xconfig/card.pm:1 #, fuzzy, c-format msgid "Choose an X server" msgstr "Bir X vericisi seçin" #: ../../Xconfig/card.pm:1 #, c-format msgid "X server" msgstr "X verici" #: ../../Xconfig/card.pm:1 #, c-format msgid "64 MB or more" msgstr "64 MB və ya daha çox" #: ../../Xconfig/card.pm:1 #, c-format msgid "32 MB" msgstr "32 MB" #: ../../Xconfig/card.pm:1 #, c-format msgid "16 MB" msgstr "16 MB" #: ../../Xconfig/card.pm:1 #, c-format msgid "8 MB" msgstr "8 MB" #: ../../Xconfig/card.pm:1 #, c-format msgid "4 MB" msgstr "4 MB" #: ../../Xconfig/card.pm:1 #, c-format msgid "2 MB" msgstr "2 MB" #: ../../Xconfig/card.pm:1 #, c-format msgid "1 MB" msgstr "1 MB" #: ../../Xconfig/card.pm:1 #, c-format msgid "512 kB" msgstr "512 kB" #: ../../Xconfig/card.pm:1 #, c-format msgid "256 kB" msgstr "256 kB" #: ../../Xconfig/main.pm:1 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "Mövcud qurğuları saxlayım?\n" "Hal-hazırkı qurğular:\n" "\n" "%s" #: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Options" msgstr "Seçənəklər" #: ../../Xconfig/main.pm:1 #, c-format msgid "Test" msgstr "" #: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolution" msgstr "Rezolyusiya" #: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Monitor" msgstr "Monitor" #: ../../Xconfig/main.pm:1 #, fuzzy, c-format msgid "Graphic Card" msgstr "Ekran kartı" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Vertical refresh rate" msgstr "Şaquli yeniləmə sür'əti" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Horizontal refresh rate" msgstr "Üfüqi yeniləmə sür'əti" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "Buradaki iki vacib parametr üfüqi ve şaquli yeniləmə sür'ətləridir.\n" "Seçərkən monitorunuzun qabiliyyətinin üstündə bir parametr\n" "seçməməyiniz çox vacibdir, əks halda monitor zərər görər.\n" "Seçərkən bir qərarsızlığa düşərsəniz, alçaq rezolyusiya seçin." #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "" #: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Vendor" msgstr "Geri al" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play" msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Choose a monitor" msgstr "Monitorunuzu seçin" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Graphics card: %s" msgstr "Ekran kartı: %s" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Choose the resolution and the color depth" msgstr "Rezolyusiya və rəng dərinliyini seçin" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolutions" msgstr "Rezolyusiyalar" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "4 billion colors (32 bits)" msgstr "4 milyard rəng (32 bits)" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "16 million colors (24 bits)" msgstr "16 milyon rəng (24 bits)" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "65 thousand colors (16 bits)" msgstr "65 min rəng (16 bits)" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "32 thousand colors (15 bits)" msgstr "32 min rəng (15 bits)" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "256 colors (8 bits)" msgstr "256 rəng (8 bits)" #: ../../Xconfig/test.pm:1 #, fuzzy, c-format msgid "Is this the correct setting?" msgstr "Doğrudur?" #: ../../Xconfig/test.pm:1 #, fuzzy, c-format msgid "Leaving in %d seconds" msgstr "%d saniyə sonra çıxılacaq" #: ../../Xconfig/test.pm:1 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" #: ../../Xconfig/test.pm:1 #, fuzzy, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "Diqqət: Bu qrafika kartı ilə ediləcək sınaq təhlükəlidir" #: ../../Xconfig/test.pm:1 #, c-format msgid "Do you want to test the configuration?" msgstr "Qurğuları sınamaq istəyirsiniz?" #: ../../Xconfig/test.pm:1 #, c-format msgid "Test of the configuration" msgstr "Qurğuların sınağı" #: ../../Xconfig/various.pm:1 #, fuzzy, c-format msgid "What norm is your TV using?" msgstr "ISDN bağlantınızın növü nədir?" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface " "(XFree) upon booting.\n" "Would you like XFree to start when you reboot?" msgstr "" "Kompüterinizi avtomatik olaraq X ilə açılması üçün qura bilərəm.\n" "Açılışda X Window ilə başlamaq istəyirsiniz?" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphical interface at startup" msgstr "X ilə Açılış" #: ../../Xconfig/various.pm:1 #, c-format msgid "XFree86 driver: %s\n" msgstr "XFree86 sürücü: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "XFree86 server: %s\n" msgstr "XFree86 verici: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Resolution: %s\n" msgstr "Rezolyusiya: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Color depth: %s\n" msgstr "Rəng dərinliyi: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphics memory: %s kB\n" msgstr "Ekran kartı yaddaşı: %s KB\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphics card: %s\n" msgstr "Ekran kartı: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Monitorun Üfüqi Yeniləməsi: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Monitorun Şaquli Daraması: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor: %s\n" msgstr "Monitor: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Mouse device: %s\n" msgstr "Siçan avadanlığı: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Mouse type: %s\n" msgstr "Siçan növü: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Keyboard layout: %s\n" msgstr "Klavatura düzülüşü: %s\n" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Options: %s" msgstr "Seçənəklər: %s" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Mount point: " msgstr "Bağlama nöqtəsi: " #: ../../diskdrake/dav.pm:1 #, fuzzy, c-format msgid "Server: " msgstr "Verici" #: ../../diskdrake/dav.pm:1 #, c-format msgid "The URL must begin with http:// or https://" msgstr "" #: ../../diskdrake/dav.pm:1 #, fuzzy, c-format msgid "Please enter the WebDAV server URL" msgstr "Xahiş edirik siçanınızı seçin" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount point" msgstr "Bağlama nöqtəsi" #: ../../diskdrake/dav.pm:1 #, c-format msgid "Server" msgstr "Verici" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount" msgstr "Bağla" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Unmount" msgstr "Ayır" #: ../../diskdrake/dav.pm:1 #, fuzzy, c-format msgid "New" msgstr "yeni" #: ../../diskdrake/dav.pm:1 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``%s'' instead" msgstr "Yerinə ``%s'' işlət" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Type" msgstr "Növ" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``Unmount'' first" msgstr "Əvvəlcə ``Ayır'-ı işlət" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Delete" msgstr "Sil" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Create" msgstr "Yarat" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Filesystem types:" msgstr "Fayl sistemi növü:" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Empty" msgstr "Boş" #: ../../diskdrake/hd_gtk.pm:1 #, fuzzy, c-format msgid "Windows" msgstr "NIS sahəsi" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "HFS" msgstr "HFS" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "SunOS" msgstr "SunOS" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Swap" msgstr "Swap" #: ../../diskdrake/hd_gtk.pm:1 #, fuzzy, c-format msgid "Journalised FS" msgstr "bağlama iflas etdi" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Ext2" msgstr "Ext2" #: ../../diskdrake/hd_gtk.pm:1 #, fuzzy, c-format msgid "No hard drives found" msgstr "Yerli Çap Edici" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please click on a partition" msgstr "Xahiş edirik bir bölmə üstünə tıqlayın" #: ../../diskdrake/hd_gtk.pm:1 #, fuzzy, c-format msgid "" "You have one big MicroSoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Tək bir böyük disk bölməniz var\n" "(əsasən MS DOS/Windows istifadə edər).\n" "Əvvəlcə bu disk bölməsinin böyüklüyünü dəyişdirməyinizi\n" "tövsiyə edirik. Əvvəlcə bölmənin üstünə, sonra \"Böyüklüyü\n" "Dəyişdir\" düyməsinə tıqlayın" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Choose action" msgstr "Monitorunuzu seçin" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Wizard" msgstr "Sehirbaz" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Aboot istifadə etməyi istəyirsinizsə, boş disk sahəsi (2048 sektor bəsdir.)\n" "buraxmayı unutmayın." #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please make a backup of your data first" msgstr "Əvvəlcə datanızın yedəyini alın" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Read carefully!" msgstr "Diqqətlə Oxuyun!" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key (again)" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key" msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "The encryption keys do not match" msgstr "Parollar uyğun gəlmir" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "Bu parol çox sadədir (en az %d xarakter boyunda olmalıdır)" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose your filesystem encryption key" msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Filesystem encryption key" msgstr "Fayl sistemi növü: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Type: " msgstr "Növ: " #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "on channel %d id %d\n" msgstr "%d data yolunda, %d nö'li\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Partition table type: %s\n" msgstr "Bölmə cədvəli növü: %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "LVM-disks %s\n" msgstr "LVM-diskləri %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Info: " msgstr "Mə'lumat: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Geometriyası: %s silindr, %s baş, %s sektor\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size: %s\n" msgstr "Böyüklük: %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Read-only" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Device: " msgstr "Avadanlıq: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "Bu, ikili açılış üçün xüsusi\n" "Bootstrap-dır.\n" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" "\n" "Bəlkə də bu bir Sürücü bölməsidir.\n" "Onda bunu ele beləcə buraxın.\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: %s" msgstr "Loopback faylı adı: %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "RAID-disks %s\n" msgstr "RAID-diskləri %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Chunk size %s\n" msgstr "Parça böyüklüyü %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Level %s\n" msgstr "Səviyyə %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Ana açılma bölməsi\n" " (MS-DOS açılışı üçün)\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "Loopback faylı:\n" " %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Mounted\n" msgstr "Bağlı\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Not formatted\n" msgstr "Şəkilləndirilməmiş\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Formatted\n" msgstr "Şəkilləndirilmiş\n" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Cylinder %d to %d\n" msgstr "Silindr %d -dən silindr %d-yə\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid ", %s sectors" msgstr ", %s sektor" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size: %s" msgstr "Böyüklüyü: %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Start: sector %s\n" msgstr "Başlanğıc: sektor %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Name: " msgstr "Ad: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "DOS sürücü hərfi: %s (sadəcə təxmini)\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "partition %s is now known as %s" msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Removing %s" msgstr "Rezolyusiya: %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Copying %s" msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Moving files to the new partition" msgstr "Yeni bölmələr üçün boş sahə yoxdur" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Hide files" msgstr "mkraid iflas etdi" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Move files to the new partition" msgstr "Yeni bölmələr üçün boş sahə yoxdur" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" "%s bölməsi şəkilləndirildikdən sonra bu bölmədəki bütün mə'lumatlar " "silinəcəkdir" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "Yeni qurğuların fəallaşmağı üçün sistemi yenidən başlatmalısınız" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "%s sürücüsünün bölmə cədvəli diskə yazılacaq!" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "The package %s is needed. Install it?" msgstr "" "Bu paket yenilənməlidir\n" "Sistemdən çıxarmaq mövzusunda ciddisiniz?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "What type of partitioning?" msgstr "Nəcə bölməlandirmə istəyirsən?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Be careful: this operation is dangerous." msgstr "Diqqətlı olun: bu əməliyyat təhlükəlidir." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "chunk size" msgstr "parça böyüklüyü" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "level" msgstr "səviyyə" #: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1 #, c-format msgid "device" msgstr "avadanlıq" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Various" msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Mount options" msgstr "Modul seçənəkləri:" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "File already exists. Use it?" msgstr "Fayl onsuz da vardır. İşlədilsin?" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "File is already used by another loopback, choose another one" msgstr "" "Fayl başqa bir loopback tərəfindən istifadədədir, başqa\n" "birini seçin" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Give a file name" msgstr "Həqiqi adı" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Filesystem type: " msgstr "Fayl sistemi növü: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size in MB: " msgstr "MB cinsindən böyüklük: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: " msgstr "Loopback fayl adı: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback" msgstr "Loopback" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This partition can't be used for loopback" msgstr "Bu disk bölməsi loopback üçün işlədilməz" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "LVM name?" msgstr "LVM adı?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "new" msgstr "yeni" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose an existing LVM to add to" msgstr "Əlavə etmək üçün mövcud bir LVM seçin" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose an existing RAID to add to" msgstr "Əlavə etmək üçün mövcud bir RAID seçin" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving partition..." msgstr "Bölmə daşınır..." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving" msgstr "Daşınır" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which sector do you want to move it to?" msgstr "Hansı sektora daşımaq istəyirsiniz?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Sector" msgstr "Sektor" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which disk do you want to move it to?" msgstr "Hansı diskə daşımaq istəyirsiniz?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Move" msgstr "Daşı" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "New size in MB: " msgstr "MB cinsindən böyüklük: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose the new size" msgstr "Yeni böyüklük seçin" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Resize" msgstr "Böyüklüyünü Dəyişdir" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" "%s bölməsi böyüklüyü dəyişdirildirkdən sonra bu bölmədəki bütün mə'lumatlar " "silinəcəkdir" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All data on this partition should be backed-up" msgstr "Bu bölmədəki bütün mə'lumatlar yedəklənməlidir" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This partition is not resizeable" msgstr "Hansı bölmə növünü istəyirsiniz?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Computing FAT filesystem bounds" msgstr "Fat fayl sistemi ucları hesaplanır" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Where do you want to mount %s?" msgstr "%s avadanlığını haraya bağlamaq istəyirsiniz?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "Bu disk bölməsi loopback üçün istifadə edildiyindən ötrü bağlanma " "nöqtəsindən ayrıla bilinmir.\n" "Əvvəlcə loopback-ı ləğv edin." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount device %s?" msgstr "%s avadanlığını haraya bağlamaq istəyirsiniz?" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "%s loopback avadanlığını haraya bağlamaq istəyirsiniz?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Switching from ext2 to ext3" msgstr "" #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #, c-format msgid "Which filesystem do you want?" msgstr "Hansı dili istəyirsiniz?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Change partition type" msgstr "Bölmə növünü Dəyişdir" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" "%s bölməsinin növünü dəyişdirdikdən sonra, bu bölmədəki bütün mə'lumatlar " "silinəcəkdir" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Remove the loopback file?" msgstr "Loopback faylı şəkilləndirilir: %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Preference: " msgstr "Xüsusiyyətlər: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Start sector: " msgstr "Başlanğıç sektoru: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Create a new partition" msgstr "Yeni bölmə yarat" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Use for loopback" msgstr "Loopback üçün istifadə et" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Modify RAID" msgstr "RAIDi dəyişdir" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove from LVM" msgstr "LVMdən ayır" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove from RAID" msgstr "RAIDdən ayır" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Add to LVM" msgstr "LVMə əlavə et" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Add to RAID" msgstr "RAIDə əlavə et" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Format" msgstr "Şəkilləndir" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Detailed information" msgstr "Mə'lumatı göstər" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Trying to rescue partition table" msgstr "Bölmə cədvəli qurtarılmağa cəhd edilir" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "Disket sürücüyə bir disket yerləşdirin\n" "Bu disketdəki bütün mə'lumatlar yox olacaqdır" #: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1 #: ../../network/modem.pm:1 #, c-format msgid "Warning" msgstr "Xəbərdarlıq" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Select file" msgstr "Fayl seç" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "Yedək bölmə cədvəli eyni böyüklüyə sahib deyil\n" "Davam etmək istəyirsiniz?" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Removable media automounting" msgstr "Taxılıb sökülə bilən avadanlıqların avtomatik bağlanması" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Reload partition table" msgstr "Bölmə cədvəlini qurtar" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Rescue partition table" msgstr "Bölmə cədvəlini qurtar" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Restore partition table" msgstr "Bölmə cədvəlini qurtar" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Save partition table" msgstr "Bölmə cədvəlini yaz" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "Artıq bölmə yaratmaq üçün, bir bölməni silib məntiqi bölmə yaradın" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "I can't add any more partition" msgstr "Artıq bölmə əlavə edilə bilməz" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All primary partitions are used" msgstr "Bütün birinci bölmələr istifadədədir" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Hard drive information" msgstr "Sabit disk seçkisi" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Auto allocate" msgstr "Avtomatik ayır" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Clear all" msgstr "Hamısını təmizlə" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "Qurğuları sınamaq istəyirsiniz?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without writing the partition table?" msgstr "Bölmə cədvəlini qeyd etmədən çıxırsınız?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without saving" msgstr "Qeyd etmədən Çıx" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Continue anyway?" msgstr "Davam edilsin?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to expert mode" msgstr "Usta moduna keç" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to normal mode" msgstr "Normal moda keç" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Undo" msgstr "Geri al" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Exit" msgstr "Ext2" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Choose a partition" msgstr "Monitorunuzu seçin" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Choose another partition" msgstr "Yeni bölmə yarat" #: ../../diskdrake/removable.pm:1 #, fuzzy, c-format msgid "Change type" msgstr "Bölmə növünü Dəyişdir" #: ../../diskdrake/smbnfs_gtk.pm:1 #, fuzzy, c-format msgid "Search servers" msgstr "DNS verici" #: ../../diskdrake/smbnfs_gtk.pm:1 #, fuzzy, c-format msgid "Domain" msgstr "NIS sahəsi" #: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Username" msgstr "İstifadəçi adı" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, fuzzy, c-format msgid "Domain Authentication Required" msgstr "Tanıtma" #: ../../diskdrake/smbnfs_gtk.pm:1 #, fuzzy, c-format msgid "Another one" msgstr "İnternet" #: ../../diskdrake/smbnfs_gtk.pm:1 #, fuzzy, c-format msgid "Which username" msgstr "İstifadəçi adı" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Can't login using username %s (bad password?)" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "cpu # " msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "SMBus controllers" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "USB controllers" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "SCSI controllers" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Firewire controllers" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "(E)IDE/ATA controllers" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Joystick" msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Scanner" msgstr "Ekran kartınızı seçin" #: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Unknown/Others" msgstr "Ümumi" #: ../../harddrake/data.pm:1 #, c-format msgid "Bridges and system controllers" msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Modem" msgstr "Siçan" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Ethernetcard" msgstr "Eternet Kartı" #: ../../harddrake/data.pm:1 #, c-format msgid "Processors" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Webcam" msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Soundcard" msgstr "Səs kartı" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Other MultiMedia devices" msgstr "Digər" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Tvcard" msgstr "TV kartı" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Videocard" msgstr "Ekran modu" #: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Tape" msgstr "Növ" #: ../../harddrake/data.pm:1 #, c-format msgid "DVD-ROM" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "CD/DVD burners" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "CDROM" msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Disk" msgstr "Danimarka dili" #: ../../harddrake/data.pm:1 #, c-format msgid "Zip" msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Floppy" msgstr "Disketə qeyd et" #: ../../harddrake/sound.pm:1 #, c-format msgid "Let me pick any driver" msgstr "" #: ../../harddrake/sound.pm:1 #, fuzzy, c-format msgid "Driver:" msgstr "Sürücü" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Choosing an arbitratry driver" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Sound trouble shooting" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Unkown driver" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "No known driver" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "No open source driver" msgstr "" #: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Please Wait... Applying the configuration" msgstr "Lütdən Gözləyin... Qurğular əlavə edilir" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver'll only be used on next bootstrap." msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Trouble shooting" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independant " "sound API (it's available on most unices systems) but it's a very basic and " "limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" #: ../../harddrake/sound.pm:1 #, fuzzy, c-format msgid "Sound configuration" msgstr "Yerli Şəbəkə Quraşdırılması" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "No alternative driver" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "enable radio support" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Radio support:" msgstr "" #: ../../harddrake/v4l.pm:1 #, fuzzy, c-format msgid "PLL setting:" msgstr "Şəkilləndirilir" #: ../../harddrake/v4l.pm:1 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Number of capture buffers:" msgstr "" #: ../../harddrake/v4l.pm:1 #, fuzzy, c-format msgid "Tuner type:" msgstr "Bölmə növünü Dəyişdir" #: ../../harddrake/v4l.pm:1 #, fuzzy, c-format msgid "Card model:" msgstr "Kart mem (DMA)" #: ../../harddrake/v4l.pm:1 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" #: ../../harddrake/v4l.pm:1 #, fuzzy, c-format msgid "Unknown|Generic" msgstr "Ümumi" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "" #: ../../harddrake/v4l.pm:1 #, fuzzy, c-format msgid "Auto-detect" msgstr "Avtomatik təsbit işlət" #: ../../interactive/newt.pm:1 #, fuzzy, c-format msgid "Do" msgstr "Qurtardı" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (default %s) " msgstr "Seçkiniz? (əsas %s) " #: ../../interactive/stdio.pm:1 #, c-format msgid "Bad choice, try again\n" msgstr "Xətalı tərcih, təkrar sınayın\n" #: ../../interactive/stdio.pm:1 #, c-format msgid "Re-submit" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "" #: ../../interactive/stdio.pm:1 #, fuzzy, c-format msgid "Your choice? (default `%s'%s) " msgstr "Seçkiniz? (əsas %s) " #: ../../interactive/stdio.pm:1 #, c-format msgid " enter `void' for void entry" msgstr "" #: ../../interactive/stdio.pm:1 #, fuzzy, c-format msgid "Do you want to click on this button?" msgstr "aboot istifadə etmək istəyirsiniz?" #: ../../interactive/stdio.pm:1 #, fuzzy, c-format msgid "Button `%s': %s" msgstr "Seçənəklər: %s" #: ../../interactive/stdio.pm:1 #, fuzzy, c-format msgid "Your choice? (0/1, default `%s') " msgstr "Seçkiniz? (əsas %s) " #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "%s modulunun yüklənməsi iflas etdi.\n" "Yenidən başqa bir parametr ilə sınamaq istəyirsiniz?" #: ../../modules/interactive.pm:1 #, c-format msgid "Specify options" msgstr "Seçənəkləri göstər" #: ../../modules/interactive.pm:1 #, c-format msgid "Autoprobe" msgstr "Avtomatik yoxla" #: ../../modules/interactive.pm:1 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "Bəzi hallarda, %s sürücü düzgün işləməsi üçün əlavə mə'lumat istəyə bilər.\n" "Sürücüler üçün əlavə bir xüsusiyyət göstərmək mi istəyərsiniz, yoxsa\n" "sürücülərin lazımi mə'lumatlar üçün avadalığı tanımasını mı istəyərsiniz? \n" "Bə'zən tanımlama kompüterinizi dondura bilər amma donduğu üçün\n" "kompüterinizə heç bir şey olmaz." #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../modules/interactive.pm:1 #, c-format msgid "Which %s driver should I try?" msgstr "Hansı %s sürücüsü sınansın?" #: ../../modules/interactive.pm:1 #, c-format msgid "Module options:" msgstr "Modul seçənəkləri:" #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "İstəsəniz indi %s modulunun parametrlərini göstərə bilərsiniz.\n" "Parametrlər``ad=qiymət ad2=qiymət2...'' şəklində olmalıdır.\n" "Məsələn ``io=0x300 irq=7''" #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "(module %s)" msgstr "(modul %s)" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../modules/interactive.pm:1 #, c-format msgid "Installing driver for %s card %s" msgstr "%s kartı (%s) üçün sürücü yüklənir" #: ../../modules/interactive.pm:1 #, c-format msgid "See hardware info" msgstr "Avadanlıq mə'lumatına bax" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have any %s interfaces?" msgstr "Heç %s ara üzü var?" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have another one?" msgstr "Başqa var?" #: ../../modules/interactive.pm:1 #, c-format msgid "Found %s %s interfaces" msgstr "%s %s ara üzü tapıldı" #: ../../modules/interactive.pm:1 #, c-format msgid "You can configure each parameter of the module here." msgstr "" #: ../../modules/parameters.pm:1 #, fuzzy, c-format msgid "comma separated strings" msgstr "Bölmə şəkilləndirilməsi" #: ../../modules/parameters.pm:1 #, c-format msgid "comma separated numbers" msgstr "" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated strings" msgstr "" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated numbers" msgstr "" #: ../../modules/parameters.pm:1 #, fuzzy, c-format msgid "a number" msgstr "Telefon nömrəsi" #: ../../network/adsl.pm:1 #, c-format msgid "" "You need the alcatel microcode.\n" "Download it at\n" "http://www.speedtouchdsl.com/dvrreg_lx.htm\n" "and copy the mgmt.o in /usr/share/speedtouch" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" "ADSL ilə internetə bağlanmanın ən yaxşı yolu pppoe'dur.\n" "Bəzi bağlantılar pptp istifadə edir, çox azı isə dhcp işlədir.\n" "Bilmirsiniz isə 'pppop istifadə et'i seçin" #: ../../network/adsl.pm:1 ../../network/ethernet.pm:1 #, c-format msgid "Connect to the Internet" msgstr "İnternetə bağlan" #: ../../network/adsl.pm:1 #, c-format msgid "Sagem (using pppoa) usb" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "Alcatel speedtouch usb" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "use dhcp" msgstr "dhcp istifadə et" #: ../../network/adsl.pm:1 #, c-format msgid "use pptp" msgstr "pptpe istifadə et" #: ../../network/adsl.pm:1 #, c-format msgid "use pppoe" msgstr "pppoe istifadə et" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Other ports" msgstr "Qapıları sına" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Everything (no firewall)" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535." msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp.\n" "Have a look at /etc/services for information." msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrake Linux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" "tinyfirewall configurator\n" "\n" "Bu, Linuks Mandrake sisteminiz üçün şəxsi bir firewall quraşdıracaqdır.\n" "Daha güclü və e'tibarlı sistem üçün xahiş edirik xüsusi MandrakeSecurity " "Firewall\n" "buraxılışını tədqiq edin." #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "No network card" msgstr "şəbəkə kartı tapılmadı" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "POP and IMAP Server" msgstr "Verici" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Mail Server" msgstr "Databeyz" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Domain Name Server" msgstr "Sahə(domain) adı" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Web Server" msgstr "Verici" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Host name" msgstr "Ev sahibi adı" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, fuzzy, c-format msgid "Zeroconf Host name" msgstr "Ev sahibi adı" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "" "\n" "\n" "Enter a Zeroconf host name without any dot if you don't\n" "want to use the default host name." msgstr "" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Configuring network" msgstr "Şəbəkə Qurğuları" #: ../../network/ethernet.pm:1 #, c-format msgid "" "Please choose which network adapter you want to use to connect to Internet." msgstr "İnternetə bağlanmaq üçün şəbəkə adapteri seçin." #: ../../network/ethernet.pm:1 ../../standalone/drakgw:1 #: ../../standalone/drakpxe:1 #, c-format msgid "Choose the network interface" msgstr "Şəbəkə ara üzünü seçin" #: ../../network/ethernet.pm:1 #, c-format msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" "Sisteminizdə heç bir eternet şəbəkə adapteri tapıla bilmədi.\n" "Bu bağlantı şəklini qura bilmərəm." #: ../../network/ethernet.pm:1 #, c-format msgid "" "Which dhcp client do you want to use?\n" "Default is dhcp-client." msgstr "" "Hansı dhcp alıcısını istifadə edəcəksiniz?\n" "Əsası dhcp-client dir" #: ../../network/isdn.pm:1 #, c-format msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "Heç bir ISDN PCI kart tapılmaı. Sonrakı ekrandakılardan seçin." #: ../../network/isdn.pm:1 #, c-format msgid "" "I have detected an ISDN PCI card, but I don't know its type. Please select a " "PCI card on the next screen." msgstr "" "ISDN PCI kart tapdım, amma növünü bilmirəm. Xahiş edirik sonrakı ekrandakı " "kartlardan birini seçin." #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "Which of the following is your ISDN card?" msgstr "Hansısı sizin ISDN kartınızdır?" #: ../../network/isdn.pm:1 #, c-format msgid "ISDN Configuration" msgstr "ISDN quraşdırılması" #: ../../network/isdn.pm:1 #, c-format msgid "Abort" msgstr "Dayandır" #: ../../network/isdn.pm:1 #, c-format msgid "Continue" msgstr "Davam et" #: ../../network/isdn.pm:1 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "ISA kartınız var isə sonrakı ekrandakı qiymətlər doğru olmalıdır.\n" "\n" "PCMCIA kartınız var isə kartınızın irq və ya io'sunu bilməlisiniz.\n" #: ../../network/isdn.pm:1 #, c-format msgid "I don't know" msgstr "Bilmirəm" #: ../../network/isdn.pm:1 #, c-format msgid "PCI" msgstr "PCI" #: ../../network/isdn.pm:1 #, c-format msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: ../../network/isdn.pm:1 #, c-format msgid "What kind of card do you have?" msgstr "Hansı növ kartınız var?" #: ../../network/isdn.pm:1 #, c-format msgid "Found \"%s\" interface do you want to use it ?" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "Which protocol do you want to use?" msgstr "Hansı protokolu istifadə etmək istəyirsiniz?" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "Protocol for the rest of the world" msgstr "Bütün dünya" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "Bütün dünya \n" " D-Channel'lə xaric (kiralıq xətlər)" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "European protocol" msgstr "Açılış Protokolu" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "European protocol (EDSS1)" msgstr "Avropa (EDSS1)" #: ../../network/isdn.pm:1 #, c-format msgid "" "Select your provider.\n" "If it isn't listed, choose Unlisted." msgstr "" "İnternet xidmət vericinizi seçin.\n" "Siyahıda deyilsə Siyahıda deyil'i seçin." #: ../../network/isdn.pm:1 #, c-format msgid "External ISDN modem" msgstr "Xarici ISDN kart" #: ../../network/isdn.pm:1 #, c-format msgid "Internal ISDN card" msgstr "Daxili ISDN kart" #: ../../network/isdn.pm:1 #, c-format msgid "What kind is your ISDN connection?" msgstr "ISDN bağlantınızın növü nədir?" #: ../../network/isdn.pm:1 ../../network/netconnect.pm:1 #, c-format msgid "Network Configuration Wizard" msgstr "Şəbəkə Quraşdırılması Sehirbazı" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "Old configuration (isdn4net)" msgstr "Oddan divar (Firewall) quruluşu tapıldı!" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "New configuration (isdn-light)" msgstr "Oddan divar (Firewall) quruluşu tapıldı!" #: ../../network/isdn.pm:1 #, c-format msgid "" "Which ISDN configuration do you prefer?\n" "\n" "* The Old configuration uses isdn4net. It contains powerful\n" " tools, but is tricky to configure, and not standard.\n" "\n" "* The New configuration is easier to understand, more\n" " standard, but with less tools.\n" "\n" "We recommand the light configuration.\n" msgstr "" #: ../../network/modem.pm:1 #, fuzzy, c-format msgid "Do nothing" msgstr "amma oxşamır" #: ../../network/modem.pm:1 #, fuzzy, c-format msgid "Install rpm" msgstr "Qurulum" #: ../../network/modem.pm:1 #, c-format msgid "" "\"%s\" based winmodem detected, do you want to install needed software ?" msgstr "" #: ../../network/modem.pm:1 #, fuzzy, c-format msgid "Title" msgstr "Cədvəl" #: ../../network/modem.pm:1 #, c-format msgid "" "Your modem isn't supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Second DNS Server (optional)" msgstr "İkinci DNS Vericisi (arzuya görə)" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "First DNS Server (optional)" msgstr "Birinci DNS Vericisi (arzuya görə)" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Domain name" msgstr "Sahə(domain) adı" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "CHAP" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Script-based" msgstr "Skript əsaslı" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Terminal-based" msgstr "Terminal əsaslı" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "PAP" msgstr "PAP" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Login ID" msgstr "Giriş adı" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Phone number" msgstr "Telefon nömrəsi" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection name" msgstr "Bağlantı adı" #: ../../network/modem.pm:1 #, c-format msgid "Dialup options" msgstr "Çevirməli şəbəkə seçənəkləri" #: ../../network/modem.pm:1 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz" #: ../../network/netconnect.pm:1 ../../network/tools.pm:1 #, c-format msgid "Network Configuration" msgstr "Şəbəkə quraşdırılması" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Problems occured during configuration.\n" "Test your connection via net_monitor or mcc. If your connection doesn't " "work, you might want to relaunch the configuration." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "Bu edildikdən sonra Xdən çıxmağınızı tövsiyyə edirik, yoxsa\n" "verici adı xəsarətləri meydana gələ bilər." #: ../../network/netconnect.pm:1 #, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "The configuration will now be applied to your system.\n" "\n" msgstr "" "Təbrik edirik, internet və şəbəkə quraşdırılması qurtardı.\n" "\n" "Qurğular indi sisteminizə əlavə ediləcək.\n" #: ../../network/netconnect.pm:1 #, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "" "Şəbəkənin yenidən başladılması sırasında xəta oldu: \n" "\n" "%s" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "The network needs to be restarted. Do you want to restart it ?" msgstr "" "Bu paket yenilənməlidir\n" "Sistemdən çıxarmaq mövzusunda ciddisiniz?" #: ../../network/netconnect.pm:1 #, c-format msgid "Network configuration" msgstr "Şəbəkə quraşdırılması" #: ../../network/netconnect.pm:1 #, c-format msgid "Do you want to start the connection at boot?" msgstr "Bağlantınızı açılışda başlatmaq istəyirsiniz?" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Internet connection" msgstr "İnternet Bağlantısı Bölüşdürülməsi" #: ../../network/netconnect.pm:1 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Choose the connection you want to configure" msgstr "İstifadə edəcəyiniz vasitəni seçin" #: ../../network/netconnect.pm:1 #, c-format msgid "ethernet card(s) detected" msgstr "eternet kart tapıldı" #: ../../network/netconnect.pm:1 #, c-format msgid "LAN connection" msgstr "Yerli Şəbəkə quraşdırılması" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "cable connection detected" msgstr "Kabel bağlantısı" #: ../../network/netconnect.pm:1 #, c-format msgid "Cable connection" msgstr "Kabel bağlantısı" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "detected" msgstr "%s tapıldı" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "ADSL connection" msgstr "Yerli Şəbəkə quraşdırılması" #: ../../network/netconnect.pm:1 #, c-format msgid "detected %s" msgstr "%s tapıldı" #: ../../network/netconnect.pm:1 #, c-format msgid "ISDN connection" msgstr "ISDN Bağlantısı" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Winmodem connection" msgstr "Normal modem təsbiti" #: ../../network/netconnect.pm:1 #, c-format msgid "detected on port %s" msgstr "%s qapısında tapıldı" #: ../../network/netconnect.pm:1 #, c-format msgid "Normal modem connection" msgstr "Normal modem təsbiti" #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Detecting devices..." msgstr "Avadanlıqlar tanınır..." #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 #, c-format msgid "Expert Mode" msgstr "Usta Modu" #: ../../network/netconnect.pm:1 #, c-format msgid "Use auto detection" msgstr "Avtomatik təsbit işlət" #: ../../network/netconnect.pm:1 #, c-format msgid "Choose the profile to configure" msgstr "Qurulacaq profili seçin" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Welcome to The Network Configuration Wizard.\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" "Şəbəkə Quraşdırma Sehirbazına Xoç Gəldiniz\n" "\n" "İnternet/Şəbəkə qurğularınızı edəcəyik.\n" "Avtomatik təsbit istəmirsiniz isə işarəti qaldırın.\n" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "Şəbəkədən quraşdırması apardığınız üçün şəbəkəniz artıq qurulmuş olmalıdır.\n" "Şəbəkə/İnternet bağlantınızı yenidən quraşdırmaq üçün Oldu'ya yoxsa Ləğv " "et'ə basın.\n" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "" "\n" "\n" "\n" "We are now going to configure the %s connection.\n" "\n" "\n" "Press OK to continue." msgstr "" "\n" "Bağlantınızı kəsə bilərsiniz. Ya da bağlantını yenidən də quraşdıra " "bilərsiniz." #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "We are now going to configure the %s connection." msgstr "" "\n" "Bağlantınızı kəsə bilərsiniz. Ya da bağlantını yenidən də quraşdıra " "bilərsiniz." #: ../../network/netconnect.pm:1 #, c-format msgid "Internet connection & configuration" msgstr "İnternet bağlantısı & quraşdırılması" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Configure the connection" msgstr "Şəbəkəni qur" #: ../../network/netconnect.pm:1 #, c-format msgid "Disconnect" msgstr "Bağlantını kəs" #: ../../network/netconnect.pm:1 #, c-format msgid "Connect" msgstr "Bağlan" #: ../../network/netconnect.pm:1 #, c-format msgid "" "\n" "You can reconfigure your connection." msgstr "" "\n" "Bağlantınızı yenidən quraşdıra bilərsiniz." #: ../../network/netconnect.pm:1 #, c-format msgid "" "\n" "You can connect to the Internet or reconfigure your connection." msgstr "" "\n" "İstəsəniz İnternetə bağlana bilərsiniz ya da yeniden quraşdıra bilərsiniz." #: ../../network/netconnect.pm:1 #, c-format msgid "You are not currently connected to the Internet." msgstr "Hələ İnternetə bağlı deyilsiniz." #: ../../network/netconnect.pm:1 #, c-format msgid "" "\n" "You can disconnect or reconfigure your connection." msgstr "" "\n" "Bağlantınızı kəsə bilərsiniz. Ya da bağlantını yenidən də quraşdıra " "bilərsiniz." #: ../../network/netconnect.pm:1 #, c-format msgid "You are currently connected to the Internet." msgstr "Artıq İnternetə bağlısınız." #: ../../network/network.pm:1 #, fuzzy, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "Vəkil verici http://... şəklində olmalıdır." #: ../../network/network.pm:1 #, c-format msgid "Proxy should be http://..." msgstr "Vəkil verici http://... şəklində olmalıdır." #: ../../network/network.pm:1 #, c-format msgid "FTP proxy" msgstr "FTP vəkil verici" #: ../../network/network.pm:1 #, c-format msgid "HTTP proxy" msgstr "HTTP vəkil verici" #: ../../network/network.pm:1 #, c-format msgid "Proxies configuration" msgstr "Vəkil vericilər quraşdırılması" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "IP ünvanı 1.2.3.4 şəklində olmalıdır" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "IP ünvanı 1.2.3.4 şəklində olmalıdır" #: ../../network/network.pm:1 #, c-format msgid "Gateway device" msgstr "Keçit avadanlığı" #: ../../network/network.pm:1 #, c-format msgid "Gateway (e.g. %s)" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "DNS server" msgstr "DNS verici" #: ../../network/network.pm:1 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" "Xahiş edirik kompüterinizn adını girin.\n" "Məsələn``kompüteradı.sahəadı.com''.\n" "Əgər şəbəkə keçidi istifadə edirsinizsə bunun da IP nömrəsini girməlisiniz." #: ../../network/network.pm:1 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" #: ../../network/network.pm:1 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "IP ünvanı 1.2.3.4 şəklində olmalıdır" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "Start at boot" msgstr "Açılışda başladılır" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "Assign host name from DHCP address" msgstr "Xahiş edirik siçanınızı seçin" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "Network Hotplugging" msgstr "Şəbəkə quraşdırılması" #: ../../network/network.pm:1 #, c-format msgid "Track network card id (useful for laptops)" msgstr "" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "DHCP host name" msgstr "Ev sahibi adı" #: ../../network/network.pm:1 ../../standalone/drakconnect:1 #: ../../standalone/drakgw:1 #, c-format msgid "Netmask" msgstr "Netmask" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakconnect:1 #, c-format msgid "IP address" msgstr "IP ünvanı" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "(bootp/dhcp/zeroconf)" msgstr "(bootp/dhcp)" #: ../../network/network.pm:1 #, c-format msgid "Automatic IP" msgstr "Avtomatlaşdırılmış IP" #: ../../network/network.pm:1 #, c-format msgid " (driver %s)" msgstr " (sürücü %s)" #: ../../network/network.pm:1 #, c-format msgid "Configuring network device %s" msgstr "%s şəbəkə avadanlığı qurulur" #: ../../network/network.pm:1 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "Xahiş edirik bu kompüter üçün IP qurğularını girin" #: ../../network/network.pm:1 #, c-format msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" "DİQQƏT: Bu avadanlıq daha əvvəl İntenetə bağlanmaq üçün qurulmuşdur.\n" "Avadanlığın qurğularını dəyişdirmaək istəmirsiniz isə,\n" "OLDU ya basın.\n" "Aşağıdakı girişləri düzəltməniz özünü əvvəlki qurğuların üstünə yazacaqdır." #: ../../network/shorewall.pm:1 #, c-format msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fixes after installation." msgstr "" "Diqqət! Var olan Firewall qurğusu tapıldı. Yükləmədən sonra bir az əl " "gəzdirə bilərsiniz." #: ../../network/shorewall.pm:1 #, c-format msgid "Firewalling configuration detected!" msgstr "Oddan divar (Firewall) quruluşu tapıldı!" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Password" msgstr "Hesap Parolu" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Login (user name)" msgstr "Hesab Girişi (istifadəçi adı)" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Connection timeout (in sec)" msgstr "Bağlantı növü:" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Connection speed" msgstr "Bağlantı növü:" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Dialing mode" msgstr "Yığma modu" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "Choose your country" msgstr "Klaviaturanızı seçin" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider dns 2 (optional)" msgstr "Dns xidmətcisi 2 (arzuya görə)" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider dns 1 (optional)" msgstr "Dns xidmətcisi 1 (arzuya görə)" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider phone number" msgstr "İXM telefon nömrəsi" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider name (ex provider.net)" msgstr "İnternet xidmət vericinizin adı (məsələn azeronline.com)" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Your personal phone number" msgstr "Sizin şəxsi telefon nömrəniz" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_1" msgstr "Kart IO_1" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_0" msgstr "Kart IO_0" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO" msgstr "Kart IO" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card mem (DMA)" msgstr "Kart mem (DMA)" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IRQ" msgstr "Kart IRQ" #: ../../network/tools.pm:1 #, c-format msgid "Please fill or check the field below" msgstr "Xahiş edirik aşağıdakıları doldurun ya da seçin" #: ../../network/tools.pm:1 #, c-format msgid "Connection Configuration" msgstr "Bağlantı quraşdırılması" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "" "The system doesn't seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" "Sisteminiz İnternetə bağlı deyil.\n" "Bağlantını yenidən quraşdırın" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "For security reasons, it will be disconnected now." msgstr "Təhlükəsizlik səbəbi ilə indi bağlantı qopacaqdır." #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "The system is now connected to the Internet." msgstr "İnternetə artıq bağlısınız" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Testing your connection..." msgstr "Bağlantınız sınanır..." #: ../../network/tools.pm:1 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "İnternete girişi indi sınamaq istəyirsiniz?" #: ../../network/tools.pm:1 #, c-format msgid "Internet configuration" msgstr "İnternet qurğuları" #: ../../partition_table/raw.pm:1 #, fuzzy, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" "Bə'zən sürücünüzdə pis şeylər ola bilər.\n" "Datanın bütövlüyü yoxlaması bacarılmadı. \n" "Bu o demekdir ki diskə yazılan hər şey təsadüfi olacaqdır" #: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " (Default)" msgstr " (Əsas)" #: ../../printer/cups.pm:1 #, fuzzy, c-format msgid "On CUPS server \"%s\"" msgstr "CUPS verici IP" #: ../../printer/cups.pm:1 ../../printer/main.pm:1 #, fuzzy, c-format msgid "Remote Printers" msgstr "Uzaq Çap Edici" #: ../../printer/cups.pm:1 ../../printer/data.pm:1 #, c-format msgid "CUPS" msgstr "" #: ../../printer/cups.pm:1 #, c-format msgid "(on this machine)" msgstr "" #: ../../printer/cups.pm:1 #, fuzzy, c-format msgid "(on %s)" msgstr "(modul %s)" #: ../../printer/data.pm:1 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "LPRng" msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "LPRng - LPR New Generation" msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "LPD" msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "LPD - Line Printer Daemon" msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "PDQ" msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "PDQ - Print, Don't Queue" msgstr "" #: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Unknown Model" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Unknown model" msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "%s (Port %s)" msgstr "Qapı" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Host %s" msgstr "Ev sahibi adı" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Network %s" msgstr "Şəbəkə ara üzü" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Interface \"%s\"" msgstr "Ara üz %s" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Local network(s)" msgstr "şəbəkə kartı tapılmadı" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Raw printer (No driver)" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", using command %s" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid ", printing to %s" msgstr "%s faylına yazarkən xəta oldu" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on HP JetDirect" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on USB" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on parallel port \\#%s" msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid ", USB printer" msgstr "Çap Edicisiz" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid ", USB printer \\#%s" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " on parallel port \\#%s" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Local Printers" msgstr "Yerli Çap Edici" #: ../../printer/main.pm:1 #, c-format msgid "Pipe job into a command" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Enter a printer device URI" msgstr "Çap Edici avadanlığı URI" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Printer on NetWare server" msgstr "Çap Edici Vericisi" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Printer on SMB/Windows 95/98/NT server" msgstr "SMB/Windows 95/98/NT" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Network printer (TCP/Socket)" msgstr "Şəbəkə Çap Edicisi (soket) " #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer on remote lpd server" msgstr "Uzaq çap edici vericisi(lpd)" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Printer on remote CUPS server" msgstr "Uzaq CUPS vericisi" #: ../../printer/main.pm:1 #, c-format msgid "Remote printer" msgstr "Uzaq Çap Edici" #: ../../printer/main.pm:1 #, c-format msgid "Local printer" msgstr "Yerli Çap Edici" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Configuring applications..." msgstr "Çap Edicini Qur" #: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Printerdrake" msgstr "Çap Edici" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Removing printer \"%s\"..." msgstr "CUPS sürücü datası oxunur..." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "Şəbəkəni yenidən başlatmaq istəyirsiniz?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remove printer" msgstr "Uzaq Çap Edici" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Learn how to use this printer" msgstr "Qurğuları sınamaq istəyirsiniz?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Print test pages" msgstr "Sınaq səhifəsi çap edilir..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" "GIMP." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing printer from Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Adding printer to Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add this printer to Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Default printer" msgstr "Yerli Çap Edici" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Set this printer as the default" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer options" msgstr "Çap edici seçənəkləri" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model, driver" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Removing old printer \"%s\"..." msgstr "CUPS sürücü datası oxunur..." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer name, description, location" msgstr "Çap Edici Bağlantısı" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer connection type" msgstr "İnternet Bağlantısı Bölüşdürülməsi" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Raw printer" msgstr "Çap Edicisiz" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do it!" msgstr "" #: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 #: ../../standalone/drakfont:1 ../../standalone/net_monitor:1 #, c-format msgid "Close" msgstr "Qapat" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "Printer %s\n" "What do you want to modify on this printer?" msgstr "Qurğuları sınamaq istəyirsiniz?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Modify printer configuration" msgstr "İnternet qurğuları" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Add a new printer" msgstr "Çap Edicisiz" #: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 #, c-format msgid "Normal Mode" msgstr "Normal Mod" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Change the printing system" msgstr "Şəbəkəni qur" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer sharing" msgstr "Çap Edici" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "CUPS configuration" msgstr "Yerli Şəbəkə Quraşdırılması" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Display all available remote CUPS printers" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it." msgstr "" "Aşağıda yazıçıdakı növbələr verilmişdir.\n" "Yenilərini əlavə edə bilər, və ya mövcud olanları dəyişdirə bilərsiniz." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing system: " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking installed software..." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing Foomatic..." msgstr "%s paketi qurulur" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Failed to configure printer \"%s\"!" msgstr "Çap Edicini Qur" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Configuring printer \"%s\"..." msgstr "Çap Edicini Qur" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Reading printer data..." msgstr "CUPS sürücü datası oxunur..." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Select Printer Spooler" msgstr "Çap Edici Bağlantısı Seçin" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Setting Default Printer..." msgstr "Yerli Çap Edici" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing %s ..." msgstr "%s paketi qurulur" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Removing %s ..." msgstr "Rezolyusiya: %s\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Starting the printing system at boot time" msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessable by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing a printing system in the %s security level" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "paranoid" msgstr "Şübhəci" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "high" msgstr "Yüksək" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Restarting printing system..." msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuration of a remote printer" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network is accessable after booting your " "system and correct the configuration using the Mandrake Control Center, " "section \"Network & Internet\"/\"Connection\", and afterwards set up the " "printer, also using the Mandrake Control Center, section \"Hardware\"/" "\"Printer\"" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Configure the network now" msgstr "Şəbəkəni qur" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Go on without configuring the network" msgstr "Şəbəkə Qurğuları" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Network functionality not configured" msgstr "Monitor qurulmayıb" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Starting network..." msgstr "Bağlantınız başladılır..." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Refreshing printer data..." msgstr "CUPS sürücü datası oxunur..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Transfer printer configuration" msgstr "İnternet qurğuları" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transferring %s..." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "New printer name" msgstr "Çap Edicisiz" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "Çap edici adı təkcə hərf, rəqəm və alt xətt daxil edə bilər" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transfer" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do not transfer printers" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "LPD and LPRng do not support IPP printers.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing test page(s)..." msgstr "Sınaq səhifəsi çap edilir..." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Print option list" msgstr "Çap edici seçənəkləri" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printing on the printer \"%s\"" msgstr "Şəbəkə dayandırılır" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "Şəbəkə dayandırılır" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printing/Scanning on \"%s\"" msgstr "Şəbəkə dayandırılır" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "Şəbəkə dayandırılır" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s\n" "\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Did it work properly?" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" "Sınaq səhifəsi çap edici vasitəsinə göndərildi.\n" "Çap edicinin işləməsi üçün bir az vaxt keçər.\n" "Düz mü işləyir?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "Sınaq səhifəsi çap edici vasitəsinə göndərildi.\n" "Çap edicinin işləməsi üçün bir az vaxt keçər.\n" "Çap vəziyyəti:\n" "%s\n" "\n" "Düz mü işləyir?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Do not print any test page" msgstr "Sınaq səhifəsi çap edilir..." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Photo test page" msgstr "Sınaq səhifəsi çap edilir..." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Alternative test page (A4)" msgstr "Sınaq səhifəsi çap edilir..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Alternative test page (Letter)" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Standard test page" msgstr "Standart" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Print" msgstr "Çap Edici" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "No test pages" msgstr "Bəli, hər iki sınaq səhifəsini də çap et" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Test pages" msgstr "Qapıları sına" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "Çap edicini sınamaq istəyirsiniz?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s out of range!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be a number!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be an integer number!" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer default settings" msgstr "Çap Edici Bağlantısı" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your printer belongs to the group of GDI laser printers (winprinters) sold " "by different manufacturers which uses the Zenographics ZJ-stream raster " "format for the data sent to the printer. The driver for these printers is " "still in a very early development stage and so it will perhaps not always " "work properly. Especially it is possible that the printer only works when " "you choose the A4 paper size.\n" "\n" "Some of these printers, as the HP LaserJet 1000, for which this driver was " "originally created, need their firmware to be uploaded to them after they " "are turned on. In the case of the HP LaserJet 1000 you have to search the " "printer's Windows driver CD or your Windows partition for the file " "\"sihp1000.img\" and upload the file to the printer with one of the " "following commands:\n" "\n" " lpr -o raw sihp1000.img\n" " cat sihp1000.img > /dev/usb/lp0\n" "\n" "The first command can be given by any normal user, the second must be given " "as root. After having done so you can print normally.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Lexmark inkjet configuration" msgstr "İnternet qurğuları" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "OKI winprinter configuration" msgstr "İnternet qurğuları" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Find the correct model in the list when a wrong model or " "\"Raw printer\" is highlighted." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Which printer model do you have?" msgstr "Nə cür bir çap ediciniz var?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer model selection" msgstr "Çap Edici Bağlantısı" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Reading printer database..." msgstr "CUPS sürücü datası oxunur..." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Select model manually" msgstr "Uzaq Çap Edici" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "The model is correct" msgstr "Doğrudur?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Your printer model" msgstr "Uzaq Çap Edici" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Preparing printer database..." msgstr "CUPS sürücü datası oxunur..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Location" msgstr "Yeri" #: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Description" msgstr "İzah" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer" msgstr "Çap edici adı" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter Printer Name and Comments" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Making printer port available for CUPS..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Scanning on your HP multi-function device" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing mtools packages..." msgstr "%s paketi qurulur" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing SANE packages..." msgstr "%s paketi qurulur" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking device and configuring HPOJ..." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing HPOJ package..." msgstr "%s paketi qurulur" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP " "PhotoSmart or an HP LaserJet 2200?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "A command line must be entered!" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Command line" msgstr "Sahə(domain) adı" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here you can specify any arbitrary command line into which the job should be " "piped instead of being sent directly to a printer." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Pipe into command" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Detected model: %s %s" msgstr "%s tapıldı" #: ../../printer/printerdrake.pm:1 #, c-format msgid "A valid URI must be entered!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer Device URI" msgstr "Çap Edici avadanlığı URI" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" #: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Port" msgstr "Qapı" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer host name or IP" msgstr "Çap Edici Ev sahibi" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "The port number should be an integer!" msgstr "Qapı nömrəsi rəqəmlə yazılmalıdır" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer host name or IP missing!" msgstr "Çap Edici Ev sahibi" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" "Soket çap edicidən yekun almaq üçün, çap edicinin ev sahibi adını ve " "mümkünsə, qapısının nömrəsini verməlisiniz." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) in the input fields." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "TCP/Socket Printer Options" msgstr "Soket Çap Edici Qurğuları" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Host \"%s\", port %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", host \"%s\", port %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Scanning network..." msgstr "Bağlantınız başladılır..." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer auto-detection" msgstr "Avtomatik təsbit işlət" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP queue name missing!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP server name missing!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print Queue Name" msgstr "Çap Edici Növbə Adı" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer Server" msgstr "Çap Edici Vericisi" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "NetWare çap edicidən yekun almaq üçün, NetWare vericisinin adı və çap " "edici \n" "növbəsi adı ilə istifadəçi adı va parolu verilməlidir." #: ../../printer/printerdrake.pm:1 #, c-format msgid "NetWare Printer Options" msgstr "NetWare Çap Edici Qurğuları" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SECURITY WARNING!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Samba share name missing!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Auto-detected" msgstr "Avtomatik təsbit işlət" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Workgroup" msgstr "İş qrupu" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Share name" msgstr "Paylaşdırma adı" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB server IP" msgstr "SMB verici IP" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB server host" msgstr "SMB verici adı" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" "Bir SMB çap edicidən yekun almaq üçün, SMB kompüter adı, çap edici " "vericisinin\n" "IP ünvanı, çap edicinin paylaşdırma adı, işləmə grupu, istifadəçi adı və \n" "parol verilməlidir." #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "SMB (Windows 9x/NT) Çap Edici Seçənəkləri" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "Şəbəkə dayandırılır" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remote printer name missing!" msgstr "Uzaqdakı ev sahibi adı" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remote host name missing!" msgstr "Uzaqdakı ev sahibi adı" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remote printer name" msgstr "Uzaq Çap Edici" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remote host name" msgstr "Uzaqdakı ev sahibi adı" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "Uzaqdakı bir lpd çap edici növbəsini istifadə etmək üçün, \n" "çap edicinin bağlı olduğu çap edici vericisinin adını və növbə \n" "adınını verməlisiniz." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote lpd Printer Options" msgstr "Uzaq Çap Edici (lpd) Seçənəkləri" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Manual configuration" msgstr "Quraşdırma" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "You must choose/enter a printer/device!" msgstr "Çap Edici avadanlığı URI" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Please choose the port that your printer is connected to." msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the port that your printer is connected to or enter a device " "name/file name in the input line" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer you want to set up. The configuration of the " "printer will work fully automatically. If your printer was not correctly " "detected or if you prefer a customized printer configuration, turn on " "\"Manual configuration\"." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Currently, no alternative possibility is available" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The configuration of the printer will work fully automatically. If your " "printer was not correctly detected or if you prefer a customized printer " "configuration, turn on \"Manual configuration\"." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "The following printer was auto-detected. " msgstr "Aşağıdakı paketlər sistemdən silinəcəklər" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer to which the print jobs should go or enter a " "device name/file name in the input line" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer you want to set up or enter a device name/file " "name in the input line" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Alternatively, you can specify a device name/file name in the input line" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "If it is not the one you want to configure, enter a device name/file name in " "the input line" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Available printers" msgstr "Yerli Çap Edici" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "No printer found!" msgstr "Yerli Çap Edici" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "You must enter a device or file name!" msgstr "Çap Edici avadanlığı URI" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Local Printer" msgstr "Yerli Çap Edici" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "USB printer \\#%s" msgstr "Çap Edicisiz" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer on parallel port \\#%s" msgstr "Çap Edici Ev sahibi" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "SMB/Windows 95/98/NT" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Network printer \"%s\", port %s" msgstr "Şəbəkə Çap Edicisi (soket) " #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Detected %s" msgstr "%s tapıldı" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr "SMB/Windows 95/98/NT" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", network printer \"%s\", port %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the Mandrake Control " "Center." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Auto-detect printers connected to this machine" msgstr "Uzaq Çap Edici" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you don't need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) and your Windows machines must be connected and " "turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you don't need " "it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please " "choose the correct model from the list." msgstr "" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, c-format msgid ")" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid " on " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "(" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Configuring printer ..." msgstr "Çap Edicini Qur" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Searching for new printers..." msgstr "Yerli Çap Edici" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "Bağlantınızı açılışda başlatmaq istəyirsiniz?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Do you want to enable printing on printers in the local network?\n" msgstr "Çap edicini sınamaq istəyirsiniz?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid " (Make sure that all your printers are connected and turned on).\n" msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "There are no printers found which are directly connected to your machine" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "Siseminizdə şəbəkə adapteri yoxdur!" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "Siseminizdə şəbəkə adapteri yoxdur!" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "Siseminizdə şəbəkə adapteri yoxdur!" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "and %d unknown printers" msgstr "Çap Edicisiz" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "and one unknown printer" msgstr "Çap Edicisiz" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Checking your system..." msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Restarting CUPS..." msgstr "məhdudlaşdır" #: ../../printer/printerdrake.pm:1 #, c-format msgid "This server is already in the list, it cannot be added again.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Examples for correct IPs:\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "The entered IP is not correct.\n" msgstr "Doğrudur?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Server IP missing!" msgstr "Çap Edici Ev sahibi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Accessing printers on remote CUPS servers" msgstr "Uzaq CUPS vericisi" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remove selected server" msgstr "Növbəni sil" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Edit selected server" msgstr "%s tapıldı" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Add server" msgstr "İstifadəçini əlavə et" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Add here the CUPS servers whose printers you want to use. You only need to " "do this if the servers do not broadcast their printer information into the " "local network." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "IP address of host/network:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The entered host/network IP is not correct.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Host/network IP address missing." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Choose the network or host on which the local printers should be made " "available:" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Sharing of local printers" msgstr "Yerli Çap Edici" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remove selected host/network" msgstr "Növbəni sil" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Edit selected host/network" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add host/network" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "These are the machines and networks on which the locally connected printer" "(s) should be available:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically " "made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" " "as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, " "but then you have to take care of these points." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Automatic correction of CUPS configuration" msgstr "Qurulum Tərzi Quraşdırılması" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To get access to printers on remote CUPS servers in your local network you " "only need to turn on the \"Automatically find available printers on remote " "machines\" option; the CUPS servers inform your machine automatically about " "their printers. All printers currently known to your machine are listed in " "the \"Remote printers\" section in the main window of Printerdrake. If your " "CUPS server(s) is/are not in your local network, you have to enter the IP " "address(es) and optionally the port number(s) here to get the printer " "information from the server(s)." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "None" msgstr "Qurtardı" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Additional CUPS servers: " msgstr "CUPS verici IP" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "No remote machines" msgstr "Uzaq Çap Edici" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Custom configuration" msgstr "Quraşdırma" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer sharing on hosts/networks: " msgstr "Çap Edici" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Automatically find available printers on remote machines" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printers on this machine are available to other computers" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can also decide here whether printers on remote machines should be " "automatically made available on this machine." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here you can choose whether the printers connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "CUPS printer sharing configuration" msgstr "İnternet qurğuları" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these " "printers will be automatically detected." msgstr "" "Uzaq CUPS vericiləri üçün heç bir quraşdırmağa lüzüm yoxdur\n" "Buradakı hər çap edici avtomatik tapılacaqdır.\n" "Olmazsa \"Uzaq CUPS vericisi\" ni seçin." #: ../../printer/printerdrake.pm:1 #, c-format msgid "How is the printer connected?" msgstr "Çap ediciniz nə şəkildə bağlıdır?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select Printer Connection" msgstr "Çap Edici Bağlantısı Seçin" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (umask)\n" "\n" "Set the user umask." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (val)\n" "\n" "Set the shell timeout. A value of zero means no timeout." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (size)\n" "\n" "Set shell commands history size. A value of -1 means unlimited." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check open ports." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result by mail." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, reports check result to tty." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result to syslog." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "if set to yes, check for empty passwords, for no password in /etc/shadow and " "for users with the 0 id other than root." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run the daily security checks." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report unowned files." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (umask)\n" "\n" "Set the root umask." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (length, ndigits=0, nupper=0)\n" "\n" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Set the password history length to prevent password reuse." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (max, inactive=-1)\n" "\n" "Set password aging to \\fImax\\fP days and delay to change to \\fIinactive" "\\fP." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (name)\n" "\n" "Add the name as an exception to the handling of password aging by msec." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" " Enable/Disable sulogin(8) in single user level." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" " Activate/Disable daily security check." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Activate/Disable ethernet cards promiscuity check." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Use password to authenticate users." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" " Enabling su only from members of the wheel group or allow su from any user." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Enable/Disable msec hourly security check." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Enable/Disable the logging of IPv4 strange packets." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Enable/Disable libsafe if libsafe is found on the system." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg, alert=1)\n" "\n" "Enable/Disable IP spoofing protection." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg, alert=1)\n" "\n" "Enable/Disable name resolution spoofing protection. If\n" "\\fIalert\\fP is true, also reports to syslog." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg, expr='*.*', dev='tty12')\n" "\n" "Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n" "expression describing what to log (see syslog.conf(5) for more details) and\n" "dev the device to report the log." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Enable/Disable crontab and at for users. Put allowed users in /etc/cron." "allow and /etc/at.allow\n" "(see man at(1) and crontab(1))." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: ()\n" "\n" "If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n" "in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/" "server\n" "to point to /etc/security/msec/server.. The /etc/security/msec/" "server\n" "is used by chkconfig --add to decide to add a service if it is present in " "the file\n" "during the installation of packages." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if " "\\fIarg\\fP = ALL. Only local ones\n" "if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the " "services you need, use /etc/hosts.allow\n" "(see hosts.allow(5))." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "The argument specifies if clients are authorized to connect\n" "to the X server on the tcp port 6000 or not." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg, listen_tcp=None)\n" "\n" "Allow/Forbid X connections. First arg specifies what is done\n" "on the client side: ALL (all connections are allowed), LOCAL (only\n" "local connection) and NONE (no connection)." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Allow/Forbid direct root login." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Allow/Forbid remote root login." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Allow/Forbid reboot by the console user." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg" "\\fP = NONE no issues are\n" "allowed else only /etc/issue is allowed." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Allow/Forbid autologin." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" " Accept/Refuse icmp echo." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" " Accept/Refuse broadcasted icmp echo." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Accept/Refuse bogus IPv4 error messages." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Security Administrator (login or email)" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "Use libsafe for servers" msgstr "X verici üçün seçənəkləri göstərin" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "Security level" msgstr "Təhlükəsizlik səviyyəsinin quraşdırılması" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "Please choose the desired security level" msgstr "Təhlükəsizlik səviyyəsini seçin" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "DrakSec Basic Options" msgstr "Seçənəklər" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "Biz dördüncü səviyyə haqlarını verdik və sistem xarici bağlantılara qarşı " "tamamilə qapalıdır.\n" "Təhlükəsizlik səviyyəsi indi ən üstdədir." #: ../../security/level.pm:1 #, fuzzy, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "Bu təhlükəsizlik səviyyəsiylə sistemin bir verici olaraq istifadəsi " "mümkündür. \n" "Təhlükəsizlik, birdən çox alıcının bağlanmasına icazə verəcək şəkildə " "artırılmışdır. " #: ../../security/level.pm:1 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "İnternetə bağlı bir kompüter üçün standart və tövsiyə edilən bir " "təhlükəsizlik səviyyəsidir." #: ../../security/level.pm:1 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "Parollar fəallaşdırıldı, yenə də bir şəbəkə üstündə istifadə edilməməsi " "tövsiyə edilir." #: ../../security/level.pm:1 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "Bu səviyyə RAID'i diqqətli istifadənizi tövsiyə edirik. Sisteminiz daha " "asand\n" "işlədiləcək, ancaq xətalara qarşı da həssaiyyəti də artacaqdır. İnternetə \n" "bağlı isəniz bunu tövsiyə etmirik. Parol ilə girilir." #: ../../security/level.pm:1 #, c-format msgid "Paranoid" msgstr "Şübhəci" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "Higher" msgstr "Yüksək" #: ../../security/level.pm:1 #, c-format msgid "High" msgstr "Yüksək" #: ../../security/level.pm:1 #, c-format msgid "Poor" msgstr "Zəif" #: ../../security/level.pm:1 #, c-format msgid "Welcome To Crackers" msgstr "Krakerlərə xoşgəlmişsiniz" #: ../../share/advertising/01-thanks.pl:1 #, c-format msgid "" "The success of MandrakeSoft is based upon the principle of Free Software. " "Your new operating system is the result of collaborative work of the " "worldwide Linux Community." msgstr "" #: ../../share/advertising/01-thanks.pl:1 #, c-format msgid "Welcome to the Open Source world." msgstr "" #: ../../share/advertising/01-thanks.pl:1 #, c-format msgid "Thank you for choosing Mandrake Linux 9.1" msgstr "" #: ../../share/advertising/02-community.pl:1 #, c-format msgid "" "To share your own knowledge and help build Linux software, join our " "discussion forums on our \"Community\" webpages." msgstr "" #: ../../share/advertising/02-community.pl:1 #, c-format msgid "" "Want to know more and to contribute to the Open Source community? Get " "involved in the Free Software world!" msgstr "" #: ../../share/advertising/02-community.pl:1 #, c-format msgid "Build the future of Linux!" msgstr "" #: ../../share/advertising/03-software.pl:1 #, c-format msgid "" "And, of course, push multimedia to its limits with the very latest software " "to play videos, audio files and to handle your images or photos." msgstr "" #: ../../share/advertising/03-software.pl:1 #, c-format msgid "" "Surf the Web with Mozilla or Konqueror, read your mail with Evolution or " "Kmail, create your documents with OpenOffice.org." msgstr "" #: ../../share/advertising/03-software.pl:1 #, c-format msgid "MandrakeSoft has selected the best software for you" msgstr "" #: ../../share/advertising/04-configuration.pl:1 #, c-format msgid "" "Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful " "tool to fully adapt your computer to the use you make of it. Configure and " "customize elements such as the security level, the peripherals (screen, " "mouse, keyboard...), the Internet connection and much more!" msgstr "" #: ../../share/advertising/04-configuration.pl:1 #, fuzzy, c-format msgid "Mandrake's multipurpose configuration tool" msgstr "İnternet qurğuları" #: ../../share/advertising/05-desktop.pl:1 #, c-format msgid "" "Perfectly adapt your computer to your needs thanks to the 11 available " "Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME " "2.2, Window Maker, ..." msgstr "" #: ../../share/advertising/05-desktop.pl:1 #, c-format msgid "A customizable environment" msgstr "" #: ../../share/advertising/06-development.pl:1 #, c-format msgid "" "To modify and to create in different languages such as Perl, Python, C and C+" "+ has never been so easy thanks to GNU gcc 3 and the best Open Source " "development environments." msgstr "" #: ../../share/advertising/06-development.pl:1 #, c-format msgid "Mandrake Linux 9.1: the ultimate development platform" msgstr "" #: ../../share/advertising/07-server.pl:1 #, c-format msgid "" "Transform your computer into a powerful Linux server: Web server, mail, " "firewall, router, file and print server (etc.) are just a few clicks away!" msgstr "" #: ../../share/advertising/07-server.pl:1 #, c-format msgid "Turn your computer into a reliable server" msgstr "" #: ../../share/advertising/08-store.pl:1 #, c-format msgid "" "Our full range of Linux solutions, as well as special offers on products and " "other \"goodies\", are available on our e-store:" msgstr "" #: ../../share/advertising/08-store.pl:1 #, c-format msgid "The official MandrakeSoft Store" msgstr "" #: ../../share/advertising/09-mdksecure.pl:1 #, c-format msgid "" "Enhance your computer performance with the help of a selection of partners " "offering professional solutions compatible with Mandrake Linux" msgstr "" #: ../../share/advertising/09-mdksecure.pl:1 #, c-format msgid "Get the best items with Mandrake Linux Strategic partners" msgstr "" #: ../../share/advertising/10-security.pl:1 #, c-format msgid "" "MandrakeSoft has designed exclusive tools to create the most secured Linux " "version ever: Draksec, a system security management tool, and a strong " "firewall are teamed up together in order to highly reduce hacking risks." msgstr "" #: ../../share/advertising/10-security.pl:1 #, c-format msgid "Optimize your security by using Mandrake Linux" msgstr "" #: ../../share/advertising/11-mnf.pl:1 #, c-format msgid "This product is available on the MandrakeStore Web site." msgstr "" #: ../../share/advertising/11-mnf.pl:1 #, c-format msgid "" "Complete your security setup with this very easy-to-use software which " "combines high performance components such as a firewall, a virtual private " "network (VPN) server and client, an intrusion detection system and a traffic " "manager." msgstr "" #: ../../share/advertising/11-mnf.pl:1 #, c-format msgid "Secure your networks with the Multi Network Firewall" msgstr "" #: ../../share/advertising/12-mdkexpert.pl:1 #, c-format msgid "" "Join the MandrakeSoft support teams and the Linux Community online to share " "your knowledge and help others by becoming a recognized Expert on the online " "technical support website:" msgstr "" #: ../../share/advertising/12-mdkexpert.pl:1 #, c-format msgid "" "Find the solutions of your problems via MandrakeSoft's online support " "platform." msgstr "" #: ../../share/advertising/12-mdkexpert.pl:1 #, fuzzy, c-format msgid "Become a MandrakeExpert" msgstr "Usta" #: ../../share/advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "" "All incidents will be followed up by a single qualified MandrakeSoft " "technical expert." msgstr "" #: ../../share/advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "An online platform to respond to enterprise support needs." msgstr "" #: ../../share/advertising/13-mdkexpert_corporate.pl:1 #, fuzzy, c-format msgid "MandrakeExpert Corporate" msgstr "Usta" #: ../../standalone/XFdrake:1 #, c-format msgid "Please relog into %s to activate the changes" msgstr "\"%s\"a(ə) təkrar girin və dəyişiklikləri fəallaşdırın" #: ../../standalone/XFdrake:1 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "Lütfen çıxın və Ctrl-Alt-BackSpace düymələrinə basın" #: ../../standalone/drakTermServ:1 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot ISO image is %s" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "No floppy drive available!" msgstr "Disket sürücü yoxdur" #: ../../standalone/drakTermServ:1 #, c-format msgid "Floppy can be removed now" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Couldn't access the floppy!" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Please insert floppy disk:" msgstr "%s sürücüsünə bir disket taxın" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Write Config" msgstr "yenidən quraşdır" #: ../../standalone/drakTermServ:1 #, c-format msgid "Dynamic IP Address Pool:" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "dhcpd Server Configuration" msgstr "Yerli Şəbəkə Quraşdırılması" #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range End:" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range Start:" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Name Servers:" msgstr "NIS Verici" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Domain Name:" msgstr "Sahə(domain) adı" #: ../../standalone/drakTermServ:1 #, c-format msgid "Broadcast Address:" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet Mask:" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Routers:" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Netmask:" msgstr "Netmask" #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet:" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "dhcpd Config..." msgstr "Quraşdırılır..." #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Delete Client" msgstr "DHCP Alıcısı" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "<-- Edit Client" msgstr "DHCP Alıcısı" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add Client -->" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Allow Thin Clients" msgstr "DHCP Alıcısı" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Thin Client" msgstr "DHCP Alıcısı" #: ../../standalone/drakTermServ:1 #, c-format msgid "No net boot images created!" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "type: %s" msgstr "Növ: " #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Del User" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Add User -->" msgstr "İstifadəçini əlavə et" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Delete All NBIs" msgstr "Fayl seç" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "<-- Delete" msgstr "Sil" #: ../../standalone/drakTermServ:1 #, c-format msgid "This will take a few minutes." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build All Kernels -->" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "No NIC selected!" msgstr "Bağlı deyil" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Single NIC -->" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "No kernel selected!" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Whole Kernel -->" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot ISO" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot Floppy" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "drakTermServ Overview\n" "\t\t\t \n" " - Create Etherboot Enabled Boot Images:\n" " \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image " "must be created.\n" " \t\tmkinitrd-net does much of this work and drakTermServ is just a " "graphical interface\n" " \t\tto help manage/customize these images.\n" "\n" " - Maintain /etc/dhcpd.conf:\n" " \t\tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP address\n" " \t\tand net boot images to the machine. drakTermServ helps create/" "remove these entries.\n" "\t\t\t\n" " \t\t(PCI cards may omit the image - etherboot will request the " "correct image. You should\n" " \t\talso consider that when etherboot looks for the images, it " "expects names like\n" " \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \t\tA typical dhcpd.conf stanza to support a diskless client looks " "like:\n" " \t\t\n" "\t\t\t\thost curly {\n" "\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n" "\t\t\t\t\tfixed-address 192.168.192.3;\n" "\t\t\t\t\t#type fat;\n" "\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk." "nbi\";\n" "\t\t\t\t}\n" "\t\t\t\n" "\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific " "entry for\n" "\t\t\ta client machine, using a fixed address scheme facilitates using the " "functionality\n" "\t\t\tof client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" "\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can " "either be \"thin\"\n" "\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, " "while fat clients run most\n" "\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\" "$IP=client_ip\\$\\$ is\n" "\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are modified\n" "\t\t\tif thin clients are used, to enable xdmcp. Since there are security " "issues in using xdmcp,\n" "\t\t\thosts.deny and hosts.allow are modified to limit access to the local " "subnet.\n" "\t\t\t\n" "\t\t\tNote: You must stop/start the server after adding or changing " "clients.\n" "\t\t\t\n" " - Maintain /etc/exports:\n" " \t\tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \t\tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \t\tdiskless clients.\n" "\n" " \t\tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t\t/ (ro,all_squash)\n" " \t\t/home SUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" "\t\t\tWith SUBNET/MASK being defined for your network.\n" " \t\t\n" " - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n" " \t\tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$" "\\$. drakTermServ helps\n" " \t\tin this respect by adding or removing system users from this " "file.\n" "\n" " - Per client /etc/X11XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n" " \t\tThrough clusternfs, each diskless client can have it's own " "unique configuration files\n" " \t\ton the root filesystem of the server. In the future drakTermServ " "will help create these\n" " \t\tfiles.\n" "\n" " - Per client system configuration files:\n" " \t\tThrough clusternfs, each diskless client can have it's own " "unique configuration files\n" " \t\ton the root filesystem of the server. In the future, " "drakTermServ can help create files\n" " \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/" "keyboard on a per-client\n" " \t\tbasis.\n" "\n" " - /etc/xinetd.d/tftp:\n" " \t\tdrakTermServ will configure this file to work in conjunction " "with the images created by\n" " \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to each\n" " \t\tdiskless client.\n" "\n" " \t\tA typical tftp configuration file looks like:\n" " \t\t\n" " \t\tservice tftp\n" " \t\t(\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t\t}\n" " \t\t\n" " \t\tThe changes here from the default installation are changing the " "disable flag to\n" " \t\t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \t\tputs it's images.\n" "\n" " - Create etherboot floppies/CDs:\n" " \t\tThe diskless client machines need either ROM images on the NIC, " "or a boot floppy\n" " \t\tor CD to initate the boot sequence. drakTermServ will help " "generate these images,\n" " \t\tbased on the NIC in the client machine.\n" " \t\t\n" " \t\tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \t\tcat /usr/lib/etherboot/boot1a.bin \\\n" " \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n" " \n" "\n" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" "\n" " Thanks:\n" "\t- LTSP Project http://www.ltsp.org\n" "\t- Michael Brown \n" "\n" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" " Copyright (C) 2002 by MandrakeSoft \n" "\tStew Benedict sbenedict\\@mandrakesoft.com\n" "\n" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Add/Del Clients" msgstr "DHCP Alıcısı" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Add/Del Users" msgstr "İstifadəçini əlavə et" #: ../../standalone/drakTermServ:1 #, c-format msgid "Net Boot Images" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot Floppy/ISO" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Stop Server" msgstr "NIS Verici" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Start Server" msgstr "NIS Verici" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Disable Server" msgstr "Databeyz" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Enable Server" msgstr "Databeyz" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Mandrake Terminal Server Configuration" msgstr "İnternet qurğuları" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Remove the last item" msgstr "Loopback faylı şəkilləndirilir: %s" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Add an item" msgstr "İstifadəçi əlavə et" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Auto Install" msgstr "Qurulum" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" #: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1 #: ../../standalone/scannerdrake:1 #, c-format msgid "Congratulations!" msgstr "Təbriklər!" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Creating auto install floppy" msgstr "Avtomatik qurulum disketi hazırlanır" #: ../../standalone/drakautoinst:1 #, c-format msgid "manual" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Automatic Steps Configuration" msgstr "Qurulum Tərzi Quraşdırılması" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "replay" msgstr "Təkrarla" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Do you want to continue?" msgstr "" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Auto Install Configurator" msgstr "Qurulum sonrası qurğular" #: ../../standalone/drakautoinst:1 #, c-format msgid "I can't find needed image file `%s'." msgstr "" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Error!" msgstr "Xəta" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Restore Backup Problems:\n" "\n" "During the restore step, Drakbackup will verify all your\n" "backup files before restoring them.\n" "Before the restore, Drakbackup will remove \n" "your original directory, and you will loose all your \n" "data. It is important to be careful and not modify the \n" "backup data files by hand.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "options description:\n" "\n" "Please be careful when you are using ftp backup, because only \n" "backups that are already built are sent to the server.\n" "So at the moment, you need to build the backup on your hard \n" "drive before sending it to the server.\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Description:\n" "\n" " Drakbackup is used to backup your system.\n" " During the configuration you can select: \n" "\t- System files, \n" "\t- Users files, \n" "\t- Other files.\n" "\tor All your system ... and Other (like Windows Partitions)\n" "\n" " Drakbackup allows you to backup your system on:\n" "\t- Harddrive.\n" "\t- NFS.\n" "\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" "\t- FTP.\n" "\t- Rsync.\n" "\t- Webdav.\n" "\t- Tape.\n" "\n" " Drakbackup allows you to restore your system to\n" " a user selected directory.\n" "\n" " Per default all backups will be stored on your\n" " /var/lib/drakbackup directory\n" "\n" " Configuration file:\n" "\t/etc/drakconf/drakbackup/drakbackup.conf\n" "\n" "Restore Step:\n" " \n" " During the restore step, DrakBackup will remove \n" " your original directory and verify that all \n" " backup files are not corrupted. It is recommended \n" " you do a last backup before restoring.\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" " updates 2002 MandrakeSoft by Stew Benedict " msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" " Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien " msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "restore description:\n" " \n" "Only the most recent date will be used, because with incremental \n" "backups it is necessary to restore one by one each older backup.\n" "\n" "So if you don't want to restore a user please unselect all their\n" "check boxes.\n" "\n" "Otherwise, you are able to select only one of these.\n" "\n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful \n" "\toption to use. This option allows you to \n" "\tbackup all of your data the first time, and \n" "\tonly the changed data after.\n" "\tSo you will be able, during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this option all\n" "\told backups are deleted before each backup. \n" "\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "options description:\n" "\n" " - Backup system files:\n" " \n" "\tThis option allows you to backup your /etc directory,\n" "\twhich contains all configuration files. Please be\n" "\tcareful during the restore step to not overwrite:\n" "\t\t/etc/passwd \n" "\t\t/etc/group \n" "\t\t/etc/fstab\n" "\n" " - Backup User files: \n" "\n" "\tThis option allows you select all users that you want \n" "\tto backup.\n" "\tTo preserve disk space, it is recommended that you \n" "\tdo not include the web browser's cache.\n" "\n" " - Backup Other files: \n" "\n" "\tThis option allows you to add more data to save.\n" "\tWith the other backup it's not possible at the \n" "\tmoment to select incremental backup.\t\t\n" " \n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful \n" "\toption for backup. This option allows you \n" "\tto backup all your data the first time, and \n" "\tonly the changed data afterward.\n" "\tThen you will be able, during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this option all\n" "\told backups are deleted before each backup. \n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " Some errors during sendmail are caused by \n" " a bad configuration of postfix. To solve it you have to\n" " set myhostname or mydomain in /etc/postfix/main.cf\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "options description:\n" "\n" " In this step Drakbackup allow you to change:\n" "\n" " - The compression mode:\n" " \n" " If you check bzip2 compression, you will compress\n" " your data better than gzip (about 2-10 %%).\n" " This option is not checked by default because\n" " this compression mode needs more time (about 1000%% more).\n" " \n" " - The update mode:\n" "\n" " This option will update your backup, but this\n" " option is not really useful because you need to\n" " decompress your backup before you can update it.\n" " \n" " - the .backupignore mode:\n" "\n" " Like with cvs, Drakbackup will ignore all references\n" " included in .backupignore files in each directories.\n" " ex: \n" " #> cat .backupignore\n" " *.o\n" " *~\n" " ...\n" " \n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Drakbackup" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore" msgstr "Fayldan geri çağır" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup Now" msgstr "Fayl sistemi qurğuları" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Advanced Configuration" msgstr "Yerli Şəbəkə Quraşdırılması" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Wizard Configuration" msgstr "Yerli Şəbəkə Quraşdırılması" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "View Backup Configuration." msgstr "Şəbəkə quraşdırılması" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup Now from configuration file" msgstr "Şəbəkə quraşdırılması" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Drakbackup Configuration" msgstr "Şəbəkə quraşdırılması" #: ../../standalone/drakbackup:1 #, c-format msgid "Total Progress" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Sending files..." msgstr "Fayla qeyd et" #: ../../standalone/drakbackup:1 #, c-format msgid "files sending by FTP" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup other files" msgstr "Xətalı yedəkləmə faylı" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup user files" msgstr "Xətalı yedəkləmə faylı" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup system files" msgstr "Xətalı yedəkləmə faylı" #: ../../standalone/drakbackup:1 #, c-format msgid "Under Devel ... please wait." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "%s" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please select data to backup..." msgstr "Xahiş edirik istifadə üçün bir dil seçin." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please select media for backup..." msgstr "Xahiş edirik istifadə üçün bir dil seçin." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please select data to restore..." msgstr "Xahiş edirik istifadə üçün bir dil seçin." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "The following packages need to be installed:\n" msgstr "Aşağıdakı paketlər qurulacaqdır" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sending file via FTP.\n" " Please correct your FTP configuration." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sendmail.\n" " Your report mail was not sent.\n" " Please configure sendmail" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Next" msgstr "Sonrakı ->" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Previous" msgstr "<- Əvvəlki" #: ../../standalone/drakbackup:1 ../../standalone/drakperm:1 #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Save" msgstr "Hal:" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Build Backup" msgstr "Xətalı yedəkləmə faylı" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Progress" msgstr "Fayldan geri çağır" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore From Catalog" msgstr "Bölmə cədvəlini qurtar" #: ../../standalone/drakbackup:1 #, c-format msgid "Browse to new restore repository." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "CD in place - continue." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Custom Restore" msgstr "Xüsusi" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore all backups" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Failed..." msgstr "Fayldan geri çağır" #: ../../standalone/drakbackup:1 #, c-format msgid "Files Restored..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Path or Module required" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Hostname required" msgstr "Ev sahibi adı:" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Username required" msgstr "İstifadəçi adı" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Password required" msgstr "Parol" #: ../../standalone/drakbackup:1 #, c-format msgid "Host Path or Module" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Host Name" msgstr "Ev sahibi adı" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Via Network" msgstr "Fayldan geri çağır" #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore From Tape" msgstr "Bölmə cədvəlini qurtar" #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore From CD" msgstr "Disketdən geri çağır" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files not found at %s." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "" "Change\n" "Restore Path" msgstr "Fayldan geri çağır" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "" "Restore Selected\n" "Files" msgstr "Növbəni sil" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Remove user directories before restore." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "select path to restore (instead of /)" msgstr "Xahiş edirik siçanınızın növünü seçin." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Other" msgstr "Fayldan geri çağır" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Users" msgstr "Fayldan geri çağır" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore system" msgstr "Sistemi qur" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Other Media" msgstr "Digər" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Select another media to restore from" msgstr "Xahiş edirik siçanınızın növünü seçin." #: ../../standalone/drakbackup:1 #, c-format msgid "Please enter the directory where backups are stored" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore from Hard Disk." msgstr "Disketdən geri çağır" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Use quota for backup files." msgstr "Xətalı yedəkləmə faylı" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Please enter the maximum size\n" " allowed for Drakbackup" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please enter the directory to save:" msgstr "Xahiş edirik siçanınızı seçin" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Use Hard Disk to backup" msgstr "Xətalı yedəkləmə faylı" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "please choose the date to restore" msgstr "Xahiş edirik siçanınızın növünü seçin." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup the system files before:" msgstr "Xətalı yedəkləmə faylı" #: ../../standalone/drakbackup:1 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "OK to restore the other files." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid " Restore Configuration " msgstr "Şəbəkə quraşdırılması" #: ../../standalone/drakbackup:1 #, c-format msgid " Successfuly Restored on %s " msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid " All of your selected data have been " msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files are corrupted" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please uncheck or remove it on next time." msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz" #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data corrupted:\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data to restore:\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No configuration, please click Wizard or Advanced.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by webdav.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by rsync.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by SSH.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by FTP.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Tape \n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-CDROM.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Hard drive.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Daemon (%s) include:\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\tBackups use tar and gzip\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\tBackups use tar and bzip2\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\tDo not include System Files\n" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "" "\n" "- Options:\n" msgstr "Seçənəklər" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t\tErase=%s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid " (multi-session)" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid " on device: %s" msgstr "Siçan avadanlığı: %s\n" #: ../../standalone/drakbackup:1 #, c-format msgid "RW" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Other Files:\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- User Files:\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- System Files:\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Backup Sources: \n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Select user manually" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Users" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup system" msgstr "Fayl sistemi qurğuları" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please choose what you want to backup" msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin." #: ../../standalone/drakbackup:1 #, c-format msgid "on Tape Device" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "on CDROM" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "across Network" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "on Hard Drive" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please choose where you want to backup" msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "More Options" msgstr "Modul seçənəkləri:" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "When" msgstr "Çərx" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Where" msgstr "Çərx" #: ../../standalone/drakbackup:1 #, c-format msgid "What" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Send mail report after each backup to:" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Please be sure that the cron daemon is included in your services. \n" "\n" "Note that currently all 'net' medias also use the hard drive." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "" "Please choose the\n" "media for backup." msgstr "Xahiş edirik istifadə üçün bir dil seçin." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "" "Please choose the time \n" "interval between each backup" msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Use daemon" msgstr "İstifadəçi adı" #: ../../standalone/drakbackup:1 #, c-format msgid "monthly" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "weekly" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "daily" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "hourly" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "HardDrive / NFS" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "CDROM / DVDROM" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please enter the directory to save to:" msgstr "Xahiş edirik siçanınızı seçin" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check if you want to eject your tape after the backup." msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check if you want to erase your tape before the backup." msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check if you want to use the non-rewinding device." msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin." #: ../../standalone/drakbackup:1 #, c-format msgid "Please enter the device name to use for backup" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Use tape to backup" msgstr "Xətalı yedəkləmə faylı" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "No CD device defined!" msgstr "Fayl seç" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Please enter your CD Writer device name\n" " ex: 0,1,0" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check if you are using a DVDRAM device" msgstr "Xahiş edirik bir bölmə üstünə tıqlayın" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check if you are using a DVDR device" msgstr "Xahiş edirik bir bölmə üstünə tıqlayın" #: ../../standalone/drakbackup:1 #, c-format msgid " Erase Now " msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check if you want to erase your RW media (1st Session)" msgstr "Xahiş edirik bir bölmə üstünə tıqlayın" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check if you are using CDRW media" msgstr "Xahiş edirik bir bölmə üstünə tıqlayın" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check for multisession CD" msgstr "Xahiş edirik bir bölmə üstünə tıqlayın" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please choose your CD/DVD media size (Mb)" msgstr "Klaviatura quruluşunu seçiniz." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Please choose your CD/DVD device\n" "(Press Enter to propogate settings to other fields.\n" "This field isn't necessary, only a tool to fill in the form.)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use CD/DVDROM to backup" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Need hostname, username and password!" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Remember this password" msgstr "Parolsuz" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please enter your password" msgstr "Xahiş edirik təkrar sınayın" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please enter your login" msgstr "Xahiş edirik təkrar sınayın" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Please enter the directory (or module) to\n" " put the backup on this host." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please enter the host name or IP." msgstr "Xahiş edirik siçanınızı seçin" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Other (not drakbackup)\n" "keys in place already" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" " Transfer \n" "Now" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Create/Transfer\n" "backup keys for SSH" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Expect for SSH" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Net Method:" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Use network connection to backup" msgstr "Xətalı yedəkləmə faylı" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Users" msgstr "İstifadəçi adı" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Windows (FAT32)" msgstr "\"Windows\"u sil" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Incremental Backups (do not replace old backups)" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Remove Selected" msgstr "Növbəni sil" #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include the browser cache" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check all users that you want to include in your backup." msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin." #: ../../standalone/drakbackup:1 #, c-format msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use incremental backup (do not replace old backups)" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup your System files. (/etc directory)" msgstr "Xətalı yedəkləmə faylı" #: ../../standalone/drakbackup:1 #, c-format msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Please check all options that you need.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Select the files or directories and click on 'Add'" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, fuzzy, c-format msgid "File Selection" msgstr "Paket Qrup Seçkisi" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't create catalog!" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid " Error while sending mail. \n" msgstr "%s faylı oxunurkan xəta oldu" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "file list sent by FTP: %s\n" " " msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "No changes to backup!" msgstr "Xətalı yedəkləmə faylı" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Hard Disk Backup files..." msgstr "Xətalı yedəkləmə faylı" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup Other files..." msgstr "Xətalı yedəkləmə faylı" #: ../../standalone/drakbackup:1 #, c-format msgid "Hard Disk Backup Progress..." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup User files..." msgstr "Xətalı yedəkləmə faylı" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup system files..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No tape in %s!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission problem accessing CD." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to erase the media." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Not erasable media!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Does not appear to be recordable media!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No CDR/DVDR in drive!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV transfer failed!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV remote site already in sync!" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Total progess" msgstr "Qapıları sına" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s\\@%s\n" "\n" "without being prompted for a password." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "%s not responding" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Can't find %s on %s" msgstr "%s açıla bilmir: %s\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission denied transferring %s to %s" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Bad password on %s" msgstr "Parolsuz" #: ../../standalone/drakbackup:1 #, c-format msgid "No password prompt on %s at port %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "ERROR: Cannot spawn %s." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to generate the keys." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "%s exists, delete?\n" "\n" "Warning: If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Report \n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "INFO" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "FATAL" msgstr "FAT" #: ../../standalone/drakbackup:1 #, c-format msgid "WARNING" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Cron not available yet as non-root" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Installation of %s failed. The following error occured:" msgstr "%s qurulumu iflas etdi. Olan xəta:" #: ../../standalone/drakboot:1 #, c-format msgid "No, I don't want autologin" msgstr "Xeyr, Avtomatik giriş istəmirəm" #: ../../standalone/drakboot:1 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "" "Bəli, bu istifadəçi üçün avtomatik giriş istəyirəm (istifadəçi, masa üstü)" #: ../../standalone/drakboot:1 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "Açılışda X-Window sistemini başlat" #: ../../standalone/drakboot:1 #, c-format msgid "System mode" msgstr "Sistem modu" #: ../../standalone/drakboot:1 #, c-format msgid "Bootsplash" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo screen" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "" "\n" "Select the theme for\n" "lilo and bootsplash,\n" "you can choose\n" "them separately" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Themes" msgstr "Örtüklər" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Splash selection" msgstr "Paket seçkilərini saxla" #: ../../standalone/drakboot:1 #, c-format msgid "" "You are currently using %s as your boot manager.\n" "Click on Configure to launch the setup wizard." msgstr "" "Açılış İdarəçisi olaraq hazırda %s işlədirsiniz.\n" "Quraşdırma sehirbazını başlatmaq üçün tıqlayın." #: ../../standalone/drakboot:1 #, c-format msgid "LiLo and Bootsplash themes installation successfull" msgstr "" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Theme installation failed!" msgstr "Quruluş sinifini seçin" #: ../../standalone/drakboot:1 ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Notice" msgstr "NoVİdeo" #: ../../standalone/drakboot:1 #, c-format msgid "Relaunch 'lilo'" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't relaunch LiLo!\n" "Launch \"lilo\" as root in command line to complete LiLo theme installation." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't write /etc/sysconfig/bootsplash\n" "File not found." msgstr "" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Write %s" msgstr "XFree %s" #: ../../standalone/drakboot:1 #, c-format msgid "Can't write /etc/sysconfig/bootsplash." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo message not found" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Copy %s to %s" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Backup %s to %s.old" msgstr "" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Create new theme" msgstr "Yeni bölmə yarat" #: ../../standalone/drakboot:1 #, c-format msgid "" "Display theme\n" "under console" msgstr "" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Install themes" msgstr "Sistemi qur" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo/grub mode" msgstr "Lilo/grub modu" #: ../../standalone/drakboot:1 #, c-format msgid "Yaboot mode" msgstr "Yaboot modu" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #, c-format msgid "Q" msgstr "Q" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Quit" msgstr "/Fayl/_Çıx" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #, c-format msgid "/_File" msgstr "/_Fayl" #: ../../standalone/drakboot:1 #, c-format msgid "Boot Style Configuration" msgstr "Qurulum Tərzi Quraşdırılması" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "No browser available! Please install one" msgstr "Qurulumdan sonra istifadə edə biləcəyiniz başqa dillər seçə bilərsiniz" #: ../../standalone/drakbug:1 #, c-format msgid "connecting to Bugzilla wizard ..." msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Package not installed" msgstr "Qurulumdan çıx" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Not installed" msgstr "Qurulumdan çıx" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Standalone Tools" msgstr "Konsol Vasitələri" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Report" msgstr "Qapı" #: ../../standalone/drakbug:1 #, c-format msgid "" "\n" "\n" "To submit a bug report, click on the button report.\n" "This will open a web browser window on https://drakbug.mandrakesoft.com\n" " where you'll find a form to fill in.The information displayed above will " "be \n" "transferred to that server\n" "\n" msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Release: " msgstr "Xahiş edirik gözləyin" #: ../../standalone/drakbug:1 #, c-format msgid "Kernel:" msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Package: " msgstr "Paket Qrup Seçkisi" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Application:" msgstr "Tanıtma" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Configuration Wizards" msgstr "Şəbəkə Quraşdırılması Sehirbazı" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Userdrake" msgstr "Çap Edici" #: ../../standalone/drakbug:1 #, c-format msgid "Windows Migration tool" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Urpmi" msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Software Manager" msgstr "Paylaşdırma adı" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Remote Control" msgstr "Uzaq Çap Edici" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Msec" msgstr "Siçan" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Menudrake" msgstr "Usta" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Mandrake Online" msgstr "İdarə Mərkəzi" #: ../../standalone/drakbug:1 #, c-format msgid "HardDrake" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Synchronization tool" msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "First Time Wizard" msgstr "İlk Dəfə Sehirbazına Xoş Gəldiniz" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Mandrake Control Center" msgstr "İdarə Mərkəzi" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Bug Report Tool" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Parameters" msgstr "Parametrlər" #: ../../standalone/drakconnect:1 #, c-format msgid "Internet Connection Configuration" msgstr "İnternet Bağlantısı Quraşdırılması" #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP Client" msgstr "DHCP Alıcısı" #: ../../standalone/drakconnect:1 #, c-format msgid "Ethernet Card" msgstr "Eternet Kartı" #: ../../standalone/drakconnect:1 #, c-format msgid "Gateway" msgstr "Keçit" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Connection type: " msgstr "Bağlantı növü:" #: ../../standalone/drakconnect:1 #, c-format msgid "Profile: " msgstr "Profil: " #: ../../standalone/drakconnect:1 #, c-format msgid "Internet connection configuration" msgstr "İnternet bağlantısı quraşdırılması" #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have an Internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" "Heç İnternet bağlantınız yoxdur.\n" "Əvvəlcə onları 'Quraşdır'a basaraq qurun" #: ../../standalone/drakconnect:1 #, c-format msgid "" "This interface has not been configured yet.\n" "Launch the configuration wizard in the main window" msgstr "" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "activate now" msgstr "Fəal" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "deactivate now" msgstr "Fəal" #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP client" msgstr "DHCP alıcısı" #: ../../standalone/drakconnect:1 #, c-format msgid "Started on boot" msgstr "Açılışda başladılır" #: ../../standalone/drakconnect:1 #, c-format msgid "Boot Protocol" msgstr "Açılış Protokolu" #: ../../standalone/drakconnect:1 #, c-format msgid "Adapter %s: %s" msgstr "%s Adapteri: %s" #: ../../standalone/drakconnect:1 #, c-format msgid "LAN Configuration" msgstr "Yerli Şəbəkə Quraşdırılması" #: ../../standalone/drakconnect:1 #, c-format msgid "LAN configuration" msgstr "Yerli Şəbəkə quraşdırılması" #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "Qurulu ara üzünüz yoxdure.\n" "Əvvəlcə onları 'Quraşdır'a basaraq qurun" #: ../../standalone/drakconnect:1 #, c-format msgid "Connect..." msgstr "Bağlan..." #: ../../standalone/drakconnect:1 #, c-format msgid "Disconnect..." msgstr "Bağlantını Kəs..." #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Not connected" msgstr "Bağlı deyil" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Connected" msgstr "Bağlandı" #: ../../standalone/drakconnect:1 #, c-format msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Interface:" msgstr "Ara üz" #: ../../standalone/drakconnect:1 #, c-format msgid "Gateway:" msgstr "Keçit:" #: ../../standalone/drakconnect:1 #, c-format msgid "Apply" msgstr "Əlavə Et" #: ../../standalone/drakconnect:1 #, c-format msgid "Click here to launch the wizard ->" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Wizard..." msgstr "Sehirbaz..." #: ../../standalone/drakconnect:1 #, c-format msgid "Status:" msgstr "Hal:" #: ../../standalone/drakconnect:1 #, c-format msgid "Type:" msgstr "Növ: " #: ../../standalone/drakconnect:1 #, c-format msgid "Internet access" msgstr "İnternet imkanı" #: ../../standalone/drakconnect:1 #, c-format msgid "Hostname: " msgstr "Ev sahibi adı:" #: ../../standalone/drakconnect:1 #, c-format msgid "Configure Local Area Network..." msgstr "Yerli Şəbəkəni Quraşdır..." #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "State" msgstr "Hal:" #: ../../standalone/drakconnect:1 #, c-format msgid "Driver" msgstr "Sürücü" #: ../../standalone/drakconnect:1 #, c-format msgid "Protocol" msgstr "Protokol" #: ../../standalone/drakconnect:1 #, c-format msgid "Interface" msgstr "Ara üz" #: ../../standalone/drakconnect:1 #, c-format msgid "Configure Internet Access..." msgstr "İnternet keçişini Qur..." #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Wait please" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "" "Name of the profile to create (the new profile is created as a copy of the " "current one) :" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "New profile..." msgstr "Yeni profil..." #: ../../standalone/drakconnect:1 #, c-format msgid "Profile to delete:" msgstr "Silinəcək profil:" #: ../../standalone/drakconnect:1 #, c-format msgid "Del profile..." msgstr "Profili sil..." #: ../../standalone/drakconnect:1 #, c-format msgid "Network configuration (%d adapters)" msgstr "Şəbəkə quraşdırılması (%d adapter)" #: ../../standalone/drakedm:1 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" #: ../../standalone/drakedm:1 #, c-format msgid "Choosing a display manager" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "" "Unable to properly close mkbootdisk: \n" " %s \n" " %s" msgstr "" "Düzgün mkbootdisk aparıla bilmir: \n" " %s \n" " %s" #: ../../standalone/drakfloppy:1 #, c-format msgid "Unable to fork: %s" msgstr "Fork edilə bilmir: %s" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" "%s avadanlığında medya yoxdur.\n" "Xahiş edirik. birini taxın." #: ../../standalone/drakfloppy:1 #, c-format msgid "Be sure a media is present for the device %s" msgstr "%s avadanlığında medya olduğundan əmin olun" #: ../../standalone/drakfloppy:1 #, c-format msgid "Build the disk" msgstr "Diski yarat" #: ../../standalone/drakfloppy:1 #, c-format msgid "Output" msgstr "Nəticə" #: ../../standalone/drakfloppy:1 #, c-format msgid "Remove a module" msgstr "Modulu çıxart" #: ../../standalone/drakfloppy:1 #, c-format msgid "Add a module" msgstr "Modul əlavə et" #: ../../standalone/drakfloppy:1 #, c-format msgid "omit scsi modules" msgstr "scsi modulları keç" #: ../../standalone/drakfloppy:1 #, c-format msgid "if needed" msgstr "lazım olarsa" #: ../../standalone/drakfloppy:1 #, c-format msgid "omit raid modules" msgstr "raid modulları keç" #: ../../standalone/drakfloppy:1 #, c-format msgid "force" msgstr "zorla" #: ../../standalone/drakfloppy:1 #, c-format msgid "mkinitrd optional arguments" msgstr "mkinitrdin arzuya bağlı olan arqumentləri" #: ../../standalone/drakfloppy:1 #, c-format msgid "Expert Area" msgstr "Ustaların Sahəsi" #: ../../standalone/drakfloppy:1 #, c-format msgid "kernel version" msgstr "çəyirdək buraxılışı" #: ../../standalone/drakfloppy:1 #, c-format msgid "default" msgstr "əsas" #: ../../standalone/drakfloppy:1 #, c-format msgid "General" msgstr "Ümumi" #: ../../standalone/drakfloppy:1 #, c-format msgid "boot disk creation" msgstr "açılış disketi yaradılması" #: ../../standalone/drakfloppy:1 #, c-format msgid "drakfloppy" msgstr "drakfloppy" #: ../../standalone/drakfloppy:1 #, c-format msgid "Size" msgstr "Böyüklük" #: ../../standalone/drakfloppy:1 #, c-format msgid "Module name" msgstr "Modul adı" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Post Uninstall" msgstr "Qurulumdan çıx" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Remove fonts on your system" msgstr "Siseminizdə şəbəkə adapteri yoxdur!" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Initial tests" msgstr "İnit İsmarıcı" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Post Install" msgstr "Qurulum" #: ../../standalone/drakfont:1 #, c-format msgid "Install & convert Fonts" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Copy fonts on your system" msgstr "Siseminizdə şəbəkə adapteri yoxdur!" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Remove List" msgstr "Uzaq Çap Edici" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Selected All" msgstr "Fayl seç" #: ../../standalone/drakfont:1 #, c-format msgid "Unselected All" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "here if no." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "click here if you are sure." msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Install List" msgstr "Sistemi qur" #: ../../standalone/drakfont:1 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Generic Printers" msgstr "Çap Edici" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Abiword" msgstr "Dayandır" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "StarOffice" msgstr "İş Yeri" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Choose the applications that will support the fonts:" msgstr "Şəkilləndiriləcək disk bölmələrini seçin" #: ../../standalone/drakfont:1 #, c-format msgid "" "\n" " Copyright (C) 2001-2002 by MandrakeSoft \n" "\tDUPONT Sebastien (original version)\n" " CHAUMETTE Damien \n" "\n" " This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" "\n" " Thanks:\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "About" msgstr "Dayandır" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Font List" msgstr "Bağlama nöqtəsi" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Advanced Options" msgstr "Yerli Şəbəkə Quraşdırılması" #: ../../standalone/drakfont:1 #, c-format msgid "Uninstall Fonts" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Get Windows Fonts" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Import Fonts" msgstr "Bölmə şəkilləndirilməsi" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "done" msgstr "Qurtardı" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "xfs restart" msgstr "məhdudlaşdır" #: ../../standalone/drakfont:1 #, c-format msgid "Suppress Fonts Files" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Restart XFS" msgstr "məhdudlaşdır" #: ../../standalone/drakfont:1 #, c-format msgid "Suppress Temporary Files" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "type1inst building" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "pfm fonts conversion" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "ttf fonts conversion" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript referencing" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Fonts conversion" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "True Type install done" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "please wait during ttmkfdir..." msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "True Type fonts installation" msgstr "Qurulum hazırlanır" #: ../../standalone/drakfont:1 #, c-format msgid "Fonts copy" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Search for fonts in installed list" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "could not find any font.\n" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Reselect correct fonts" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "could not find any font in your mounted partitions" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "no fonts found" msgstr "şəbəkə kartı tapılmadı" #: ../../standalone/drakfont:1 #, c-format msgid "parse all fonts" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Unselect fonts installed" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Search installed fonts" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Welcome to the Internet Connection Sharing utility!\n" "\n" "%s\n" "\n" "Click on Configure to launch the setup wizard." msgstr "" "İnternet Bağlantısı Bölüşdürmə vasitəsinə Xoş Gəldiniz!\n" "\n" "%s\n" "\n" "Quraşdırma sehirbazını açmaq üçün Quraşdıra tıqlayın." #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing configuration" msgstr "İnternet bağlantısı bölüşdürülməsi quraşdırılması" #: ../../standalone/drakgw:1 #, c-format msgid "No Internet Connection Sharing has ever been configured." msgstr "İnternet Bağlantısı Bölüşdürmə Quraşdırması aparılmayıb." #: ../../standalone/drakgw:1 #, c-format msgid "The setup has already been done, and it's currently enabled." msgstr "Quraşdırma artıq qurtarıbdır və fəaliyyətdədir." #: ../../standalone/drakgw:1 #, c-format msgid "The setup has already been done, but it's currently disabled." msgstr "Quraşdırma artıq qurtarıbdır, amma fəaliyyəti dayandırılıb." #: ../../standalone/drakgw:1 #, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" "Hər şey quruldu.\n" "İndi isə İnternet bağlantınızı yerli şəbəkədəkı başqa kompüterlər ilə " "bölüşdürə bilərsiniz, bunun üçün isə avtomatik şəbəkə quraşdırılması (DHCP) " "işlədilir." #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "Problems installing package %s" msgstr "%s paketi qurulurkən xəta oldu" #: ../../standalone/drakgw:1 #, c-format msgid "Configuring scripts, installing software, starting servers..." msgstr "Skriptlə qurulur, proqram tə'minatı qurulur, xidmətlər başladılır..." #: ../../standalone/drakgw:1 #, c-format msgid "Configuring..." msgstr "Quraşdırılır..." #: ../../standalone/drakgw:1 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "%s quğusunda dəyəsən bir LAN ünvan çaxışması tapıldı!\n" #: ../../standalone/drakgw:1 #, c-format msgid "The Local Network did not finish with `.0', bailing out." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Re-configure interface and DHCP server" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The maximum lease (in seconds)" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The default lease (in seconds)" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP end range" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP start range" msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "The internal domain name" msgstr "Çap Edicisiz" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "The DNS Server IP" msgstr "CUPS verici IP" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "(This) DHCP Server IP" msgstr "CUPS verici IP" #: ../../standalone/drakgw:1 #, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you don't know the meaning of an option, simply leave it as it is.\n" "\n" msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Local Network adress" msgstr "şəbəkə kartı tapılmadı" #: ../../standalone/drakgw:1 #, c-format msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\t\t \n" "Otherwise, I can reconfigure your interface and (re)configure a DHCP server " "for you.\n" "\n" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Current interface configuration" msgstr "İnternet qurğuları" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Show current interface configuration" msgstr "İnternet qurğuları" #: ../../standalone/drakgw:1 #, c-format msgid "No (experts only)" msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Automatic reconfiguration" msgstr "Qurulum Tərzi Quraşdırılması" #: ../../standalone/drakgw:1 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Network interface already configured" msgstr "Monitor qurulmayıb" #: ../../standalone/drakgw:1 #, c-format msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "Sizi Yerli Şəbəkəyə bağlayacaq adapteri seçin" #: ../../standalone/drakgw:1 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "Sistemnizdə bir dənə qurulmuş şəbəkə adapteri var:\n" "\n" "%s\n" "\n" "Yerli Şəbəkə adapterinizi qurmaq üzərəyəm?" #: ../../standalone/drakgw:1 #, c-format msgid "Network interface" msgstr "Şəbəkə ara üzü" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "Sisteminizdə şəbəkə kartı tapıla bilməyib.Avadanlığı quran vasitəni işə " "salın." #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "No network adapter on your system!" msgstr "Siseminizdə şəbəkə adapteri yoxdur!" #: ../../standalone/drakgw:1 #, c-format msgid "Interface %s" msgstr "Ara üz %s" #: ../../standalone/drakgw:1 #, c-format msgid "Interface %s (using module %s)" msgstr "Ara Üz %s (%s modulu işlədilir)" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Net Device" msgstr "Çap Edici Vericisi" #: ../../standalone/drakgw:1 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "Kompüterınızi İnternet bağlantısını bölüşdürmək üçün quraşdırırsınız.\n" "Bu seçənəklə yerli şəbəkənizdəki başqa kompüterlər sizin İnternet " "bağlantınızdan faydalana biləcəklər.\n" "\n" "Xəbədarlıq: Yerli Şəbəkə (LAN) qurmaq üçün uyğun Şəbəkə Adapterinə " "ehtiyacınız var." #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing" msgstr "İnternet Bağlantısı Bölüşdürülməsi" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing is now enabled." msgstr "İnternet Bağlantısı Bölüşdürülməsi indi açıldı" #: ../../standalone/drakgw:1 #, c-format msgid "Enabling servers..." msgstr "Xidmətlər fəallaşdırılır..." #: ../../standalone/drakgw:1 #, c-format msgid "dismiss" msgstr "keç" #: ../../standalone/drakgw:1 #, c-format msgid "reconfigure" msgstr "yenidən quraşdır" #: ../../standalone/drakgw:1 #, c-format msgid "enable" msgstr "fəallaşdır" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "İnternet Bağlantısı Bölüşdürülməsi qurulması artıq bitdi.\n" "Və artıq passivləşdirilmişdir.\n" "\n" "Nə etmək istəyirsiniz?" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently disabled" msgstr "İnternet Bağlantısı Bölüşdürülməsi passivləşdirildi" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing is now disabled." msgstr "İnternet Bağlantısı Bölüşdürülməsi indi bağlandı" #: ../../standalone/drakgw:1 #, c-format msgid "Disabling servers..." msgstr "Vericilər bağlanır..." #: ../../standalone/drakgw:1 #, c-format msgid "disable" msgstr "passivləşdir" #: ../../standalone/drakgw:1 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "İnternet Bağlantısı Bölüşdürülməsi qurulması artıq bitdi.\n" "Və artıq fəallaşdırılmışdır.\n" "\n" "Nə etmək istəyirsiniz?" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently enabled" msgstr "İnternet Bağlantısı Bölüşdürülməsi fəallaşdırıldı" #: ../../standalone/drakgw:1 #, c-format msgid "Sorry, we support only 2.4 kernels." msgstr "" #: ../../standalone/drakhelp:1 #, c-format msgid "" "No browser is installed on your system, Please install one if you want to " "browse the help system" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Path" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "group :" msgstr "İş qrupu" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "user :" msgstr "İstifadəçi adı" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Path selection" msgstr "Paket seçkilərini saxla" #: ../../standalone/drakperm:1 #, c-format msgid "when checked, owner and group won't be changed" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Use group id for execution" msgstr "Avtomatik təsbit işlət" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Use owner id for execution" msgstr "Avtomatik təsbit işlət" #: ../../standalone/drakperm:1 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Set-GID" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Set-UID" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "sticky-bit" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Property" msgstr "Qapı" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Permissions" msgstr "Buraxılış: %s\n" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Current user" msgstr "İstifadəçini qəbul et" #: ../../standalone/drakperm:1 #, c-format msgid "browse" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Edit current rule" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "edit" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Delete selected rule" msgstr "Növbəni sil" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "delete" msgstr "Sil" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Add a new rule at the end" msgstr "Çap Edicisiz" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "add a rule" msgstr "Modul əlavə et" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule down one level" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Down" msgstr "Qurtardı" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule up one level" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Up" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "select perm file to see/edit" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "" "Drakperm is used to see files to use in order to fix permissions, owners, " "and groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "permissions" msgstr "bölmə %s" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "group" msgstr "İş qrupu" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "user" msgstr "İstifadəçi adı" #: ../../standalone/drakperm:1 #, c-format msgid "path" msgstr "" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Location of auto_install.cfg file" msgstr "Avtomatik qurulum disketi hazırlanır" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the auto_install.cfg file is located.\n" "\n" "Leave it blank if you do not want to set up automatic installation mode.\n" "\n" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "" "No CD or DVD image found, please copy the installation program and rpm files." msgstr "" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "No image found" msgstr "Yerli Çap Edici" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Installation image directory" msgstr "Yerli Şəbəkə Quraşdırılması" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the installation image will be available.\n" "\n" "If you do not have an existing directory, please copy the CD or DVD " "contents.\n" "\n" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP end ip" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP start ip" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "" "The DHCP server will allow other computer to boot using PXE in the given " "range of address.\n" "\n" "The network address is %s using a netmask of %s.\n" "\n" msgstr "" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Interface %s (on network %s)" msgstr "Ara Üz %s (%s modulu işlədilir)" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Please choose which network interface will be used for the dhcp server." msgstr "İnternetə bağlanmaq üçün şəbəkə adapteri seçin." #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "" "You are about to configure your computer to install a PXE server as a DHCP " "server\n" "and a TFTP server to build an installation server.\n" "With that feature, other computers on your local network will be installable " "using this computer as source.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "Kompüterınızi İnternet bağlantısını bölüşdürmək üçün quraşdırırsınız.\n" "Bu seçənəklə yerli şəbəkənizdəki başqa kompüterlər sizin İnternet " "bağlantınızdan faydalana biləcəklər.\n" "\n" "Xəbədarlıq: Yerli Şəbəkə (LAN) qurmaq üçün uyğun Şəbəkə Adapterinə " "ehtiyacınız var." #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Installation Server Configuration" msgstr "Yerli Şəbəkə Quraşdırılması" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "PXE Server Configuration" msgstr "Yerli Şəbəkə Quraşdırılması" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Please wait, setting security options..." msgstr "Xahiş edirik gözləyin, qurulum hazırlanır" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Please wait, setting security level..." msgstr "Təhlükəsizlik səviyyəsinin quraşdırılması" #: ../../standalone/draksec:1 #, c-format msgid "Periodic Checks" msgstr "" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "System Options" msgstr "Modul seçənəkləri:" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Network Options" msgstr "Modul seçənəkləri:" #: ../../standalone/draksec:1 #, c-format msgid "" "The following options can be set to customize your\n" "system security. If you need an explanation, look at the help tooltip.\n" msgstr "" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Security Administrator:" msgstr "Uzaq Çap Edici (lpd) Seçənəkləri" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Security Alerts:" msgstr "Təhlükəsizlik səviyyəsinin quraşdırılması" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Security Level:" msgstr "Təhlükəsizlik səviyyəsinin quraşdırılması" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "(default value: %s)" msgstr " (Əsas)" #: ../../standalone/draksec:1 #, c-format msgid "" "Standard: This is the standard security recommended for a computer that will " "be used to connect\n" " to the Internet as a client.\n" "\n" "High: There are already some restrictions, and more automatic checks " "are run every night.\n" "\n" "Higher: The security is now high enough to use the system as a server " "which can accept\n" " connections from many clients. If your machine is only a " "client on the Internet, you\n" " should choose a lower level.\n" "\n" "Paranoid: This is similar to the previous level, but the system is entirely " "closed and security\n" " features are at their maximum\n" "\n" "Security Administrator:\n" " If the 'Security Alerts' option is set, security alerts will " "be sent to this user (username or\n" " email)" msgstr "" #: ../../standalone/draksound:1 #, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the sndconfig " "program. Just type \"sndconfig\" in a console." msgstr "" #: ../../standalone/draksound:1 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/draksound:1 #, fuzzy, c-format msgid "No Sound Card detected!" msgstr "Bağlı deyil" #: ../../standalone/draksplash:1 #, c-format msgid "%s BootSplash (%s) preview" msgstr "" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Generating preview ..." msgstr "Avadanlıqlar tanınır..." #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "You must choose an image file first!" msgstr "Çap Edici avadanlığı URI" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "ProgressBar color selection" msgstr "Çap Edici Bağlantısı" #: ../../standalone/draksplash:1 #, c-format msgid "This theme does not yet have a bootsplash in %s !" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "saving Bootsplash theme..." msgstr "" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "choose image file" msgstr "Monitorunuzu seçin" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "choose image" msgstr "Monitorunuzu seçin" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Configure bootsplash picture" msgstr "Xidmətləri qur" #: ../../standalone/draksplash:1 #, c-format msgid "Make kernel message quiet by default" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Display logo on Console" msgstr "" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Choose color" msgstr "Monitorunuzu seçin" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Save theme" msgstr "Sistemi qur" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Preview" msgstr "avadanlıq" #: ../../standalone/draksplash:1 #, c-format msgid "the color of the progress bar" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "the height of the progress bar" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "the width of the progress bar" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "text box height" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "text width" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "y coordinate of text box\n" "in number of characters" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "x coordinate of text box\n" "in number of characters" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Browse" msgstr "" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Theme name" msgstr "Paylaşdırma adı" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "final resolution" msgstr "Rezolyusiya" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "first step creation" msgstr "açılış disketi yaradılması" #: ../../standalone/draksplash:1 #, c-format msgid "" "package 'ImageMagick' is required to be able to complete configuration.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "No TV Card detected!" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Have a nice day!" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "XawTV isn't installed!" msgstr "" #: ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "There was an error while scanning for TV channels" msgstr "Paketlər qurulurkən bir xəta oldu:" #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels in progress ..." msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Area:" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "TV norm:" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Australian Optus cable TV" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Newzealand" msgstr "" #: ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "France [SECAM]" msgstr "Fransızca" #: ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "East Europe" msgstr "Avropa" #: ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "West Europe" msgstr "Avropa" #: ../../standalone/drakxtv:1 #, c-format msgid "China (broadcast)" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (cable)" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (broadcast)" msgstr "" #: ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "Canada (cable)" msgstr "Fransızca (Kanada/Quebec)" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable-hrc)" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable)" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (broadcast)" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "" "XawTV isn't installed!\n" "\n" "\n" "If you do have a TV card but DrakX has neither detected it (no bttv nor " "saa7134\n" "module in \"/etc/modules\") nor installed xawtv, please send the\n" "results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n" "with subject \"undetected TV card\".\n" "\n" "\n" "You can install it by typing \"urpmi xawtv\" as root, in a console." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "primary" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "secondary" msgstr "%d saniyə sonra çıxılacaq" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Unknown" msgstr "Ümumi" #: ../../standalone/harddrake2:1 #, c-format msgid "unknown" msgstr "bilinməyən" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Running \"%s\" ..." msgstr "CUPS sürücü datası oxunur..." #: ../../standalone/harddrake2:1 #, c-format msgid "Run config tool" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Configure module" msgstr "Siçan qurğuları" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Information" msgstr "Mə'lumatı göstər" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Detected hardware" msgstr "Avadanlıq mə'lumatına bax" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Harddrake2 version " msgstr "Sabit disk seçkisi" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Detection in progress" msgstr "%s qapısında tapıldı" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Author:" msgstr "Avtomatik yoxla" #: ../../standalone/harddrake2:1 #, c-format msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "Version:" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "About Harddrake" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/_About..." msgstr "/Kömək/_Haqqında..." #: ../../standalone/harddrake2:1 #, c-format msgid "/_Report Bug" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Select a device !" msgstr "Ekran kartınızı seçin" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Description of the fields:\n" "\n" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Harddrake help" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/_Fields description" msgstr "İzah" #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #, c-format msgid "/_Help" msgstr "/_Kömək" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/_Quit" msgstr "Çıx" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/Autodetect _jazz drives" msgstr "Avtomatik təsbit işlət" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/Autodetect _modems" msgstr "Avtomatik təsbit işlət" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/Autodetect _printers" msgstr "Avtomatik təsbit işlət" #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #, c-format msgid "/_Options" msgstr "/_Seçənəklər" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the processor" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the device" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "The type of bus on which the mouse is connected" msgstr "Siçanınızın bağlı olduğu serial Qapıyı seçin." #: ../../standalone/harddrake2:1 #, c-format msgid "Stepping of the cpu (sub model (generation) number)" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Model stepping" msgstr "Şəkilləndirilir" #: ../../standalone/harddrake2:1 #, c-format msgid "the number of the processor" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Processor ID" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "network printer port" msgstr "Şəbəkə Çap Edicisi (soket) " #: ../../standalone/harddrake2:1 #, c-format msgid "the name of the CPU" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Name" msgstr "Ad: " #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "the number of buttons the mouse has" msgstr "2 düyməli" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Number of buttons" msgstr "2 düyməli" #: ../../standalone/harddrake2:1 #, c-format msgid "Official vendor name of the cpu" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Model name" msgstr "Modul adı" #: ../../standalone/harddrake2:1 #, c-format msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Model" msgstr "Siçan" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "hard disk model" msgstr "Kart mem (DMA)" #: ../../standalone/harddrake2:1 #, c-format msgid "class of hardware device" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Media class" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Sub generation of the cpu" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Level" msgstr "səviyyə" #: ../../standalone/harddrake2:1 #, c-format msgid "Format of floppies supported by the drive" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Floppy format" msgstr "Şəkilləndir" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Halt bug" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "F00f bug" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Whether the FPU has an irq vector" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Is FPU present" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Fdiv bug" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "CPU flags reported by the kernel" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Flags" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Module" msgstr "Siçan" #: ../../standalone/harddrake2:1 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "New devfs device" msgstr "Keçit avadanlığı" #: ../../standalone/harddrake2:1 #, c-format msgid "old static device name used in dev package" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Old device file" msgstr "Fayl seç" #: ../../standalone/harddrake2:1 #, c-format msgid "This field describes the device" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "The CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Frequency (MHz)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Information level that can be obtained through the cpuid instruction" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Cpuid level" msgstr "Təhlükəsizlik səviyyəsinin quraşdırılması" #: ../../standalone/harddrake2:1 #, c-format msgid "Family of the cpu (eg: 6 for i686 class)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Cpuid family" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Whether this cpu has the Cyrix 6x86 Coma bug" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Coma bug" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Drive capacity" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Size of the (second level) cpu cache" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Cache size" msgstr "parça böyüklüyü" #: ../../standalone/harddrake2:1 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Location on the bus" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Bus identification" msgstr "Tanıtma" #: ../../standalone/harddrake2:1 #, c-format msgid "" "The GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Bogomips" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "EIDE/SCSI channel" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Channel" msgstr "Ləğv et" #: ../../standalone/harddrake2:1 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Bus" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Alternative drivers" msgstr "Sınaq səhifəsi çap edilir..." #: ../../standalone/keyboarddrake:1 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "Konsolda BackSpace'in Silmə funksyasını görməyini istəyirmisiniz?" #: ../../standalone/keyboarddrake:1 #, c-format msgid "Please, choose your keyboard layout." msgstr "Klaviatura quruluşunu seçiniz." #: ../../standalone/livedrake:1 #, c-format msgid "Unable to start live upgrade !!!\n" msgstr "Təkmilləşdirmə işi başlaya bilmir !!!\n" #: ../../standalone/livedrake:1 #, c-format msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" "Qurma Cd-Romunu sürücünüzə taxın və OLDUya basın.\n" "Əgər Cd-Rom əlinizdə yox isə, bu Cd-Rom-dan qurmamaq üçün RƏDD ETə basın." #: ../../standalone/livedrake:1 #, c-format msgid "Change Cd-Rom" msgstr "Cd-Romu dəyişdir" #: ../../standalone/localedrake:1 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Save as.." msgstr "Fərqli qeyd et..." #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Please enter your email address below " msgstr "Xahiş edirik təkrar sınayın" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "alert configuration" msgstr "Quraşdırma" #: ../../standalone/logdrake:1 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "load setting" msgstr "Şəkilləndirilir" #: ../../standalone/logdrake:1 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "service setting" msgstr "avadanlıq" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Xinetd Service" msgstr "Çap Edici Vericisi" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Webmin Service" msgstr "avadanlıq" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "SSH Server" msgstr "NIS Verici" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Samba Server" msgstr "NIS Verici" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Postfix Mail Server" msgstr "Postfix məktub vericisi, Inn xəbər vericisi" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Ftp Server" msgstr "NIS Verici" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Domain Name Resolver" msgstr "Sahə(domain) adı" #: ../../standalone/logdrake:1 #, c-format msgid "Apache World Wide Web Server" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Mail alert configuration" msgstr "Yerli Şəbəkə quraşdırılması" #: ../../standalone/logdrake:1 #, c-format msgid "Mail alert" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "please wait, parsing file: %s" msgstr "xahiş edirik, gözləyin, fayl daranır: %s" #: ../../standalone/logdrake:1 #, c-format msgid "Content of the file" msgstr "Fayl məzmunu" #: ../../standalone/logdrake:1 #, c-format msgid "Calendar" msgstr "Təqvim" #: ../../standalone/logdrake:1 #, c-format msgid "Choose file" msgstr "Fayl seç" #: ../../standalone/logdrake:1 #, c-format msgid "but not matching" msgstr "amma oxşamır" #: ../../standalone/logdrake:1 #, c-format msgid "matching" msgstr "oxşayır" #: ../../standalone/logdrake:1 ../../standalone/net_monitor:1 #, c-format msgid "Settings" msgstr "Qurğular" #: ../../standalone/logdrake:1 #, c-format msgid "A tool to monitor your logs" msgstr "Qeydlərinizə baxan vasitə" #: ../../standalone/logdrake:1 #, c-format msgid "search" msgstr "axtar" #: ../../standalone/logdrake:1 #, c-format msgid "Mandrake Tools Explanation" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Syslog" msgstr "sistem qeydi" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Messages" msgstr "ismarıclar" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "User" msgstr "İstifadəçi adı" #: ../../standalone/logdrake:1 #, c-format msgid "/Help/_About..." msgstr "/Kömək/_Haqqında..." #: ../../standalone/logdrake:1 #, c-format msgid "/Options/Test" msgstr "/Seçənəklər/Sınaq" #: ../../standalone/logdrake:1 #, c-format msgid "/File/-" msgstr "/Fayl/-" #: ../../standalone/logdrake:1 #, c-format msgid "/File/Save _As" msgstr "/Fayl/_Fərqli Qeyd Et" #: ../../standalone/logdrake:1 #, c-format msgid "S" msgstr "S" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Save" msgstr "/Fayl/_Qeyd Et" #: ../../standalone/logdrake:1 #, c-format msgid "O" msgstr "O" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Open" msgstr "/Fayl/_Aç" #: ../../standalone/logdrake:1 #, c-format msgid "N" msgstr "N" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_New" msgstr "/Fayl/_Təze" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Show only for the selected day" msgstr "Təkcə bu gününkünü göstər" #: ../../standalone/mousedrake:1 #, c-format msgid "Emulate third button?" msgstr "3 düymə emulasiyası" #: ../../standalone/mousedrake:1 #, c-format msgid "Please choose your mouse type." msgstr "Xahiş edirik siçanınızın növünü seçin." #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connect %s" msgstr "Bağlan" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Disconnect %s" msgstr "Bağlantını kəs" #: ../../standalone/net_monitor:1 #, c-format msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "received" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "transmitted" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "received: " msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "sent: " msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Local measure" msgstr "Yerli Çap Edici" #: ../../standalone/net_monitor:1 #, c-format msgid "average" msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Color configuration" msgstr "Quraşdırma" #: ../../standalone/net_monitor:1 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandrake Control Center." msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connection complete." msgstr "Bağlantı növü:" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnection from the Internet complete." msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnection from the Internet failed." msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connecting to the Internet " msgstr "İnternetə bağlan" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Disconnecting from the Internet " msgstr "İnternetə bağlan" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Wait please, testing your connection..." msgstr "Bağlantınız sınanır..." #: ../../standalone/net_monitor:1 #, c-format msgid "Logs" msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connection Time: " msgstr "Bağlantı növü:" #: ../../standalone/net_monitor:1 #, c-format msgid "Receiving Speed:" msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Sending Speed:" msgstr "Fayla qeyd et" #: ../../standalone/net_monitor:1 #, c-format msgid "Statistics" msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Profile " msgstr "Profil: " #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Network Monitoring" msgstr "Şəbəkə quraşdırılması" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Reading data of installed printers..." msgstr "Yerli Çap Edici" #: ../../standalone/scannerdrake:1 #, c-format msgid "Name/IP address of host:" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Scannerdrake" msgstr "Ekran kartınızı seçin" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "You must enter a host name or an IP address.\n" msgstr "Xahiş edirik siçanınızı seçin" #: ../../standalone/scannerdrake:1 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Sharing of local scanners" msgstr "Yerli Çap Edici" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "This machine" msgstr "oxşayır" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Remove selected host" msgstr "Növbəni sil" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Edit selected host" msgstr "%s tapıldı" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Add host" msgstr "İstifadəçini əlavə et" #: ../../standalone/scannerdrake:1 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Usage of remote scanners" msgstr "Boş sahəni istifadə et" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "All remote machines" msgstr "Uzaq Çap Edici" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use the scanners on hosts: " msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use scanners on remote computers" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Scanner sharing to hosts: " msgstr "Çap Edici" #: ../../standalone/scannerdrake:1 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Re-generating list of configured scanners ..." msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Searching for new scanners ..." msgstr "Yerli Çap Edici" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Searching for configured scanners ..." msgstr "Yerli Çap Edici" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Scanner sharing" msgstr "Çap Edici" #: ../../standalone/scannerdrake:1 #, c-format msgid "Add a scanner manually" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Search for new scanners" msgstr "Yerli Çap Edici" #: ../../standalone/scannerdrake:1 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "Siseminizdə şəbəkə adapteri yoxdur!" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "Siseminizdə şəbəkə adapteri yoxdur!" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" from Multimedia/Graphics in the " "applications menu." msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "choose device" msgstr "Açılış avadanlığı" #: ../../standalone/scannerdrake:1 #, c-format msgid "Please select the device where your %s is attached" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Searching for scanners ..." msgstr "Yerli Çap Edici" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Auto-detect available ports" msgstr "Avtomatik təsbit işlət" #: ../../standalone/scannerdrake:1 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the Mandrake Control Center in Hardware " "section." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is unsupported" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not known by this version of Scannerdrake." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not supported by this version of Mandrake Linux." msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Port: %s" msgstr "Qapı" #: ../../standalone/scannerdrake:1 #, c-format msgid ", " msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Detected model: %s" msgstr "%s tapıldı" #: ../../standalone/scannerdrake:1 #, c-format msgid " (" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Select a scanner model" msgstr "Ekran kartınızı seçin" #: ../../standalone/scannerdrake:1 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "%s found on %s, configure it automatically?" msgstr "Bir çap edici qurmaq istəyirsiniz?" #: ../../standalone/service_harddrake:1 #, fuzzy, c-format msgid "Hardware probing in progress" msgstr "%s qapısında tapıldı" #: ../../standalone/service_harddrake:1 #, c-format msgid "Some devices were added:\n" msgstr "" #: ../../standalone/service_harddrake:1 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "" #: ../../share/compssUsers:999 msgid "Office Workstation" msgstr "İş Yeri Stansiyası" #: ../../share/compssUsers:999 msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "İdarə proqramları: kəlmə işləyənlər (kword, abiword), hesablayıcılar və pdf " "göstəriciləri, vs." #: ../../share/compssUsers:999 msgid "Workstation" msgstr "Masa üstü" #: ../../share/compssUsers:999 msgid "Game station" msgstr "Oyun stansiyası" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "Məzəli proqramlar: arkad, lövhə oyunları, strategiya, vs" #: ../../share/compssUsers:999 msgid "Multimedia station" msgstr "Multimedya stansiyası" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "Səs və video çalınması/düzəliş proqramları" #: ../../share/compssUsers:999 msgid "Internet station" msgstr "İnternet stansiyası" #: ../../share/compssUsers:999 msgid "" "Set of tools to read and send mail and news (pine, mutt, tin..) and to " "browse the Web" msgstr "" "Elektronik məktub və xəbər oxuyucusu (pine, mutt, tin..) və Web səyyahları" #: ../../share/compssUsers:999 msgid "Network Computer (client)" msgstr "Şəbəkə Kompüteri (alıcı)" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "SSH daxil bir çox protokolların alıcıları" #: ../../share/compssUsers:999 #, fuzzy msgid "Configuration" msgstr "Yerli Şəbəkə Quraşdırılması" #: ../../share/compssUsers:999 msgid "Tools to ease the configuration of your computer" msgstr "Kompüter qurğularını asandlaşdıran vasitələr" #: ../../share/compssUsers:999 msgid "Scientific Workstation" msgstr "Elmi iş stansiyası" #: ../../share/compssUsers:999 msgid "Scientific applications such as gnuplot" msgstr "" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "Konsol Vasitələri" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "Editorlar, rəflər, fayl vasitələri, terminallar" #: ../../share/compssUsers:999 msgid "KDE Workstation" msgstr "KDE iş stansiyası" #: ../../share/compssUsers:999 msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "KDE, əsas qrafiki ara üz və yardımçi proqramlar kolleksiyası" #: ../../share/compssUsers:999 msgid "Graphical Environment" msgstr "Qrafiki Ara Üz" #: ../../share/compssUsers:999 msgid "Gnome Workstation" msgstr "Gnome iş stansiyası" #: ../../share/compssUsers:999 msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "" "İstifadəçi dostu proqram və masa üstü ilə bərabər qrafiki ara üz vasitələri" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "Başqa qrafiki ara üzlər" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Icewm, Window Maker, Enlightenment, Fvwm, vs." #: ../../share/compssUsers:999 msgid "Development" msgstr "Təcrübi" #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "C və C++ inkişaf kitabxanaları, proqramları və daxil ediləcək fayllar" #: ../../share/compssUsers:999 msgid "Documentation" msgstr "Sənədlər" #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "Linuks və pulsuz proqram tə'minatıları Kitablar və Howtoları" #: ../../share/compssUsers:999 msgid "LSB" msgstr "" #: ../../share/compssUsers:999 msgid "Linux Standard Base. Third party applications support" msgstr "" #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "Verici, Veb/FTP" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "Apache və Pro-ftpd" #: ../../share/compssUsers:999 #, fuzzy msgid "Mail" msgstr "Mali" #: ../../share/compssUsers:999 #, fuzzy msgid "Postfix mail server" msgstr "Postfix məktub vericisi, Inn xəbər vericisi" #: ../../share/compssUsers:999 msgid "Database" msgstr "Databeyz" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "PostgreSQL və ya MySQL databeyz vericisi" #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "Verici, Firewall/Ruter" #: ../../share/compssUsers:999 msgid "Internet gateway" msgstr "İnternet keçişı" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "DNS/NIS " #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "Domeyn Ad bə Şəbəkə Mə'lumat Vericisi" #: ../../share/compssUsers:999 msgid "Network Computer server" msgstr "Şəbəkə Kompüteri vericisi" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "NFS vericisi, SMB vericisi, SSH vericisi, Vəkil Verici" #: ../../share/compssUsers:999 msgid "Office" msgstr "İş Yeri" #: ../../share/compssUsers:999 msgid "Set of tools for mail, news, web, file transfer, and chat" msgstr "Məktub, xəbərlər, fayl daşınması, chat vasitələri" #: ../../share/compssUsers:999 msgid "Games" msgstr "Oyunlar" #: ../../share/compssUsers:999 msgid "Multimedia - Graphics" msgstr "Multimedya - Qrafika" #: ../../share/compssUsers:999 msgid "Graphics programs such as The Gimp" msgstr "Qrafika proqramları, məsələn The Gimp" #: ../../share/compssUsers:999 msgid "Multimedia - Sound" msgstr "Multimedya - Səs" #: ../../share/compssUsers:999 msgid "Audio-related tools: mp3 or midi players, mixers, etc" msgstr "" "Səs ilə əlaqədər vasitələr: mp3 və ya midi çalğıçılar, qarışdırıçılar, vs." #: ../../share/compssUsers:999 msgid "Multimedia - Video" msgstr "Multimedya - Video" #: ../../share/compssUsers:999 msgid "Video players and editors" msgstr "Video çalğıçıları və editorları" #: ../../share/compssUsers:999 msgid "Multimedia - CD Burning" msgstr "Multimedya - CD Yandırma" #: ../../share/compssUsers:999 msgid "Tools to create and burn CD's" msgstr "CD yazmaq və yandırmaq proqramları" #: ../../share/compssUsers:999 msgid "More Graphical Desktops (Gnome, IceWM)" msgstr "Başqa qrafiki ara üzlər (Gnome, IceWM)" #: ../../share/compssUsers:999 msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Gnome, IceWM, Windows Maker, Enlightement, Fvwm, vs." #: ../../share/compssUsers:999 msgid "Personal Information Management" msgstr "Şəxsi Mə'lumat İdarəçisi" #: ../../share/compssUsers:999 msgid "Tools for your Palm Pilot or your Visor" msgstr "Palm Pilot və ya Visorunuz üçün vasitələr" #: ../../share/compssUsers:999 msgid "Personal Finance" msgstr "Şəxsi Maliyyə" #: ../../share/compssUsers:999 msgid "Programs to manage your finances, such as gnucash" msgstr "Şəxsi maliyyə idarəçiləri, məsələn gnucash" #~ msgid "no network card found" #~ msgstr "şəbəkə kartı tapılmadı" #, fuzzy #~ msgid "Get involved in the Free Software world" #~ msgstr "Bütün dünya" #, fuzzy #~ msgid "Get the most from the Internet" #~ msgstr "İnternetə bağlan" #, fuzzy #~ msgid "User interfaces" #~ msgstr "Şəbəkə ara üzü" #, fuzzy #~ msgid "Development simplified" #~ msgstr "Təcrübi" #, fuzzy #~ msgid "" #~ "The following printers are configured. Double-click on a printer to " #~ "change its settings; to make it the default printer; to view information " #~ "about it; or to make a printer on a remote CUPS server available for Star " #~ "Office/OpenOffice.org/GIMP." #~ msgstr "" #~ "Aşağıda yazıçıdakı növbələr verilmişdir.\n" #~ "Yenilərini əlavə edə bilər, və ya mövcud olanları dəyişdirə bilərsiniz." #~ msgid "" #~ "Please enter your host name if you know it.\n" #~ "Some DHCP servers require the hostname to work.\n" #~ "Your host name should be a fully-qualified host name,\n" #~ "such as ``mybox.mylab.myco.com''." #~ msgstr "" #~ "Xahiş edirik kompüterinizın adını girin.\n" #~ "Məsələn``kompüteradı.sahəadı.com''.\n" #~ "Əgə şəbəkə keçidi istifadə edirsinizsə bunun da IP nömrəsini girməlisiniz." #~ msgid "DrakFloppy Error: %s" #~ msgstr "DrakFloppy xətası: %s" #~ msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*" #~ msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*" #~ msgid "Launch Aurora at boot time" #~ msgstr "Açılışda Auroranı başlat" #~ msgid "Traditional Gtk+ Monitor" #~ msgstr "Ənənəvi Gtk+ Monitor" #~ msgid "Traditional Monitor" #~ msgstr "Ənənəvi Monitor" #~ msgid "NewStyle Monitor" #~ msgstr "NewStyle Monitor" #~ msgid "NewStyle Categorizing Monitor" #~ msgstr "NewStyle Kateqoriyasından Monitor" #, fuzzy #~ msgid "Secure Connection" #~ msgstr "Çap Edici Bağlantısı Seçin" #, fuzzy #~ msgid "FTP Connection" #~ msgstr "Yerli Şəbəkə quraşdırılması" #~ msgid "Mail/Groupware/News" #~ msgstr "Verici, ePoçt/Groupware/Xəbərlər" #~ msgid "Postfix mail server, Inn news server" #~ msgstr "Postfix məktub vericisi, Inn xəbər vericisi" #~ msgid "/Options" #~ msgstr "/Seçənəklər" #, fuzzy #~ msgid "/Autodetect jazz drives" #~ msgstr "Avtomatik təsbit işlət" #, fuzzy #~ msgid "/Autodetect modems" #~ msgstr "Avtomatik təsbit işlət" #, fuzzy #~ msgid "/Autodetect printers" #~ msgstr "Avtomatik təsbit işlət" #~ msgid "" #~ "The partition you've selected to add as root (/) is physically located " #~ "beyond\n" #~ "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" #~ "If you plan to use the LILO boot manager, be careful to add a /boot " #~ "partition" #~ msgstr "" #~ "Seçdiyiniz bölüm fiziki sahənin üstündə (1024. silindrin xaricində)\n" #~ "/boot bölümünüz yoxdur. Lilo açılış idarəcisindən istifadə etmək " #~ "istəyirsinizsə, \n" #~ "/boot bölməsini əlavə edərkən çox diqqətli olmalısınız." #~ msgid "" #~ "Sorry I won't accept to create /boot so far onto the drive (on a cylinder " #~ "> 1024).\n" #~ "Either you use LILO and it won't work, or you don't use LILO and you " #~ "don't need /boot" #~ msgstr "" #~ "Bağışlayın, /boot bölməsini bu sürücüdə yarada bilməyəcəm.\n" #~ "Onda ya LILO istifadə edə bilməyəcəksiniz ve /boot bölümünə \n" #~ "ehtiyacınız yoxdur və ya LILO istifadəsini sınayarsınız, ancaq LILO " #~ "işləməyə bilər." #, fuzzy #~ msgid "Upgrade" #~ msgstr "Güncəlləmə" #, fuzzy #~ msgid "Do you want to configure another printer?" #~ msgstr "Qurğuları sınamaq istəyirsiniz?" #, fuzzy #~ msgid "Know how to use this printer" #~ msgstr "Qurğuları sınamaq istəyirsiniz?" #, fuzzy #~ msgid "Preparing Printerdrake..." #~ msgstr "CUPS sürücü datası oxunur..." #, fuzzy #~ msgid "Reading printer data ..." #~ msgstr "CUPS sürücü datası oxunur..." #~ msgid "" #~ "You must indicate where you wish to place the information required to " #~ "boot\n" #~ "GNU/Linux.\n" #~ "\n" #~ "Unless you know exactly what you are doing, choose \"First sector of " #~ "drive\n" #~ "(MBR)\"." #~ msgstr "" #~ "Linuksu açmaq üçün lazımi bilgilərin harada saxlanılacağına qərar verin.\n" #~ "\n" #~ "Nə etdiyinizi bilmirsinizsə, \"Diskin ilk sektoru (MBR)\" seçin." #~ msgid "Please be patient. This operation can take several minutes." #~ msgstr "Səbrli olun. Bu əməliyyat bir neçə deqiqə sürə bilər." #~ msgid "Test ports" #~ msgstr "Qapıları sına"