# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR Free Software Foundation, Inc. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "POT-Creation-Date: 2005-09-14 19:41+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: 8-bit\n" #: ../move/move.pm:292 #, c-format msgid "Which USB key do you want to format?" msgstr "" #: ../move/move.pm:296 #, c-format msgid "" "You are about to format a USB device \"%s\". This will delete all data on it.\n" "Make sure that the selected device is the USB key you want to format. \n" "We advise you to unplug all other USB storage devices while doing this operation." msgstr "" #: ../move/move.pm:448 ../move/move.pm:460 #, c-format msgid "Key is not writable" msgstr "" #: ../move/move.pm:450 #, c-format msgid "" "The USB key seems to have write protection enabled. Please\n" "unplug it, remove write protection, and then plug it again." msgstr "" #: ../move/move.pm:452 #, c-format msgid "Retry" msgstr "" #: ../move/move.pm:453 ../move/move.pm:497 #, c-format msgid "Continue without USB key" msgstr "" #: ../move/move.pm:462 #, c-format msgid "" "The USB key seems to have write protection enabled, but we can not safely\n" "unplug it now.\n" "\n" "\n" "Click the button to reboot the machine, unplug it, remove write protection,\n" "plug the key again, and launch Mandriva Move again." msgstr "" #: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1326 #, c-format msgid "Reboot" msgstr "" #: ../move/move.pm:473 #, c-format msgid "" "Your USB key does not have any valid Windows (FAT) partitions.\n" "We need one to continue (beside, it's more standard so that you\n" "will be able to move and access your files from machines\n" "running Windows). Please plug in an USB key containing a\n" "Windows partition instead.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandriva Move as a normal live Mandriva\n" "Operating System." msgstr "" #: ../move/move.pm:483 #, c-format msgid "" "We did not detect any USB key on your system. If you\n" "plug in an USB key now, Mandriva Move will have the ability\n" "to transparently save the data in your home directory and\n" "system wide configuration, for next boot on this computer\n" "or another one. Note: if you plug in a key now, wait several\n" "seconds before detecting again.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandriva Move as a normal live Mandriva\n" "Operating System." msgstr "" #: ../move/move.pm:494 #, c-format msgid "Need a key to save your data" msgstr "" #: ../move/move.pm:496 #, c-format msgid "Detect USB key again" msgstr "" #: ../move/move.pm:517 #, c-format msgid "Setting up USB key" msgstr "" #: ../move/move.pm:517 #, c-format msgid "Please wait, setting up system configuration files on USB key..." msgstr "" #: ../move/move.pm:546 #, c-format msgid "Enter your user information, password will be used for screensaver" msgstr "" #: ../move/move.pm:556 #, c-format msgid "Auto configuration" msgstr "" #: ../move/move.pm:556 #, c-format msgid "Please wait, detecting and configuring devices..." msgstr "" #: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664 diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:230 diskdrake/interactive.pm:243 diskdrake/interactive.pm:404 diskdrake/interactive.pm:422 diskdrake/interactive.pm:558 diskdrake/interactive.pm:563 diskdrake/smbnfs_gtk.pm:41 do_pkgs.pm:19 do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:209 install_any.pm:1770 install_any.pm:1822 install_steps.pm:81 install_steps_interactive.pm:37 interactive/http.pm:117 interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:42 network/ndiswrapper.pm:89 network/ndiswrapper.pm:101 network/netconnect.pm:834 network/netconnect.pm:933 network/netconnect.pm:937 network/netconnect.pm:941 network/netconnect.pm:946 network/netconnect.pm:1091 network/netconnect.pm:1095 network/netconnect.pm:1214 network/netconnect.pm:1219 network/netconnect.pm:1239 network/netconnect.pm:1393 network/thirdparty.pm:306 network/thirdparty.pm:313 network/thirdparty.pm:357 network/thirdparty.pm:359 network/thirdparty.pm:380 network/thirdparty.pm:404 printer/printerdrake.pm:244 printer/printerdrake.pm:251 printer/printerdrake.pm:276 printer/printerdrake.pm:422 printer/printerdrake.pm:427 printer/printerdrake.pm:440 printer/printerdrake.pm:450 printer/printerdrake.pm:514 printer/printerdrake.pm:686 printer/printerdrake.pm:690 printer/printerdrake.pm:772 printer/printerdrake.pm:1576 printer/printerdrake.pm:1624 printer/printerdrake.pm:1661 printer/printerdrake.pm:1706 printer/printerdrake.pm:1710 printer/printerdrake.pm:1724 printer/printerdrake.pm:1816 printer/printerdrake.pm:1897 printer/printerdrake.pm:1901 printer/printerdrake.pm:1905 printer/printerdrake.pm:1954 printer/printerdrake.pm:2012 printer/printerdrake.pm:2016 printer/printerdrake.pm:2030 printer/printerdrake.pm:2150 printer/printerdrake.pm:2154 printer/printerdrake.pm:2197 printer/printerdrake.pm:2272 printer/printerdrake.pm:2290 printer/printerdrake.pm:2299 printer/printerdrake.pm:2308 printer/printerdrake.pm:2319 printer/printerdrake.pm:2383 printer/printerdrake.pm:2478 printer/printerdrake.pm:3037 printer/printerdrake.pm:3321 printer/printerdrake.pm:3327 printer/printerdrake.pm:3891 printer/printerdrake.pm:3895 printer/printerdrake.pm:3899 printer/printerdrake.pm:4360 printer/printerdrake.pm:4601 printer/printerdrake.pm:4629 printer/printerdrake.pm:4706 printer/printerdrake.pm:4772 printer/printerdrake.pm:4892 standalone/drakTermServ:394 standalone/drakTermServ:464 standalone/drakTermServ:473 standalone/drakTermServ:774 standalone/drakTermServ:781 standalone/drakTermServ:802 standalone/drakTermServ:849 standalone/drakTermServ:1095 standalone/drakTermServ:1572 standalone/drakTermServ:1588 standalone/drakTermServ:1593 standalone/drakTermServ:1601 standalone/drakTermServ:1613 standalone/drakTermServ:1634 standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612 standalone/drakbackup:1093 standalone/drakbackup:1125 standalone/drakbackup:1648 standalone/drakbackup:1804 standalone/drakbackup:2429 standalone/drakbackup:4118 standalone/drakbackup:4338 standalone/drakclock:124 standalone/drakconnect:676 standalone/drakconnect:680 standalone/drakconnect:685 standalone/drakconnect:700 standalone/drakfont:210 standalone/drakfont:223 standalone/drakfont:261 standalone/drakgw:50 standalone/drakgw:188 standalone/drakhosts:98 standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260 standalone/draknfs:306 standalone/draknfs:609 standalone/draknfs:616 standalone/draknfs:623 standalone/drakroam:29 standalone/draksambashare:379 standalone/draksambashare:383 standalone/draksambashare:386 standalone/draksambashare:389 standalone/draksambashare:449 standalone/draksambashare:473 standalone/draksambashare:547 standalone/draksambashare:629 standalone/draksambashare:696 standalone/draksambashare:796 standalone/draksambashare:803 standalone/draksambashare:938 standalone/draksambashare:1129 standalone/draksambashare:1138 standalone/draksambashare:1147 standalone/draksambashare:1168 standalone/draksambashare:1177 standalone/draksambashare:1186 standalone/draksambashare:1206 standalone/draksambashare:1214 standalone/draksambashare:1226 standalone/draksplash:162 standalone/drakxtv:107 standalone/finish-install:49 standalone/logdrake:171 standalone/logdrake:440 standalone/logdrake:445 standalone/scannerdrake:59 standalone/scannerdrake:202 standalone/scannerdrake:261 standalone/scannerdrake:715 standalone/scannerdrake:726 standalone/scannerdrake:865 standalone/scannerdrake:876 standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121 #, c-format msgid "Error" msgstr "" #: ../move/move.pm:605 install_steps.pm:82 #, c-format msgid "" "An error occurred, but I do not know how to handle it nicely.\n" "Continue at your own risk." msgstr "" #: ../move/move.pm:660 install_steps_interactive.pm:37 #, c-format msgid "An error occurred" msgstr "" #: ../move/move.pm:666 #, c-format msgid "" "An error occurred:\n" "\n" "\n" "%s\n" "\n" "This may come from corrupted system configuration files\n" "on the USB key, in this case removing them and then\n" "rebooting Mandriva Move would fix the problem. To do\n" "so, click on the corresponding button.\n" "\n" "\n" "You may also want to reboot and remove the USB key, or\n" "examine its contents under another OS, or even have\n" "a look at log files in console #3 and #4 to try to\n" "guess what's happening." msgstr "" #: ../move/move.pm:681 #, c-format msgid "Remove system config files" msgstr "" #: ../move/move.pm:682 #, c-format msgid "Simply reboot" msgstr "" #: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96 #, c-format msgid "You can only run with no CDROM support" msgstr "" #: ../move/tree/mdk_totem:71 #, c-format msgid "Kill those programs" msgstr "" #: ../move/tree/mdk_totem:72 #, c-format msgid "No CDROM support" msgstr "" #: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92 diskdrake/interactive.pm:1052 diskdrake/interactive.pm:1062 diskdrake/interactive.pm:1115 #, c-format msgid "Read carefully!" msgstr "" #: ../move/tree/mdk_totem:77 #, c-format msgid "" "You can not use another CDROM when the following programs are running: \n" "%s" msgstr "" #: ../move/tree/mdk_totem:101 #, c-format msgid "Copying to memory to allow removing the CDROM" msgstr "" #: Xconfig/card.pm:13 #, c-format msgid "256 kB" msgstr "" #: Xconfig/card.pm:14 #, c-format msgid "512 kB" msgstr "" #: Xconfig/card.pm:15 #, c-format msgid "1 MB" msgstr "" #: Xconfig/card.pm:16 #, c-format msgid "2 MB" msgstr "" #: Xconfig/card.pm:17 #, c-format msgid "4 MB" msgstr "" #: Xconfig/card.pm:18 #, c-format msgid "8 MB" msgstr "" #: Xconfig/card.pm:19 #, c-format msgid "16 MB" msgstr "" #: Xconfig/card.pm:20 #, c-format msgid "32 MB" msgstr "" #: Xconfig/card.pm:21 #, c-format msgid "64 MB or more" msgstr "" #: Xconfig/card.pm:155 #, c-format msgid "X server" msgstr "" #: Xconfig/card.pm:156 #, c-format msgid "Choose an X server" msgstr "" #: Xconfig/card.pm:188 #, c-format msgid "Multi-head configuration" msgstr "" #: Xconfig/card.pm:189 #, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" #: Xconfig/card.pm:258 #, c-format msgid "Can not install Xorg package: %s" msgstr "" #: Xconfig/card.pm:268 #, c-format msgid "Select the memory size of your graphics card" msgstr "" #: Xconfig/card.pm:351 #, c-format msgid "Xorg configuration" msgstr "" #: Xconfig/card.pm:353 #, c-format msgid "Which configuration of Xorg do you want to have?" msgstr "" #: Xconfig/card.pm:386 #, c-format msgid "Configure all heads independently" msgstr "" #: Xconfig/card.pm:387 #, c-format msgid "Use Xinerama extension" msgstr "" #: Xconfig/card.pm:392 #, c-format msgid "Configure only card \"%s\"%s" msgstr "" #: Xconfig/card.pm:404 Xconfig/various.pm:23 #, c-format msgid "Xorg %s" msgstr "" #: Xconfig/card.pm:411 Xconfig/various.pm:22 #, c-format msgid "Xorg %s with 3D hardware acceleration" msgstr "" #: Xconfig/card.pm:413 #, c-format msgid "Your card can have 3D hardware acceleration support with Xorg %s." msgstr "" #: Xconfig/card.pm:419 #, c-format msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration" msgstr "" #: Xconfig/card.pm:421 #, c-format msgid "" "Your card can have 3D hardware acceleration support with Xorg %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" #: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:973 #, c-format msgid "Custom" msgstr "" #: Xconfig/main.pm:127 diskdrake/dav.pm:26 help.pm:14 install_steps_interactive.pm:86 install_steps_interactive.pm:1326 printer/printerdrake.pm:882 printer/printerdrake.pm:899 printer/printerdrake.pm:4701 printer/printerdrake.pm:5165 standalone/drakhosts:263 standalone/drakroam:168 standalone/draksplash:93 standalone/logdrake:176 standalone/net_applet:82 standalone/scannerdrake:477 #, c-format msgid "Quit" msgstr "" #: Xconfig/main.pm:129 #, c-format msgid "Graphic Card" msgstr "" #: Xconfig/main.pm:132 Xconfig/monitor.pm:110 #, c-format msgid "Monitor" msgstr "" #: Xconfig/main.pm:135 Xconfig/resolution_and_depth.pm:287 #, c-format msgid "Resolution" msgstr "" #: Xconfig/main.pm:138 #, c-format msgid "Test" msgstr "" #: Xconfig/main.pm:143 diskdrake/dav.pm:65 diskdrake/interactive.pm:448 diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79 printer/printerdrake.pm:1125 standalone/drakfont:491 standalone/drakfont:554 #, c-format msgid "Options" msgstr "" #: Xconfig/main.pm:178 #, c-format msgid "Your Xorg configuration file is broken, we will ignore it." msgstr "" #: Xconfig/main.pm:196 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" #: Xconfig/monitor.pm:111 #, c-format msgid "Choose a monitor for head #%d" msgstr "" #: Xconfig/monitor.pm:111 #, c-format msgid "Choose a monitor" msgstr "" #: Xconfig/monitor.pm:117 #, c-format msgid "Plug'n Play" msgstr "" #: Xconfig/monitor.pm:118 mouse.pm:49 #, c-format msgid "Generic" msgstr "" #: Xconfig/monitor.pm:119 standalone/drakconnect:591 standalone/harddrake2:54 standalone/harddrake2:88 #, c-format msgid "Vendor" msgstr "" #: Xconfig/monitor.pm:129 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "" #: Xconfig/monitor.pm:137 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync range\n" "that is beyond the capabilities of your monitor: you may damage your monitor.\n" " If in doubt, choose a conservative setting." msgstr "" #: Xconfig/monitor.pm:144 #, c-format msgid "Horizontal refresh rate" msgstr "" #: Xconfig/monitor.pm:145 #, c-format msgid "Vertical refresh rate" msgstr "" #: Xconfig/resolution_and_depth.pm:10 #, c-format msgid "256 colors (8 bits)" msgstr "" #: Xconfig/resolution_and_depth.pm:11 #, c-format msgid "32 thousand colors (15 bits)" msgstr "" #: Xconfig/resolution_and_depth.pm:12 #, c-format msgid "65 thousand colors (16 bits)" msgstr "" #: Xconfig/resolution_and_depth.pm:13 #, c-format msgid "16 million colors (24 bits)" msgstr "" #: Xconfig/resolution_and_depth.pm:127 #, c-format msgid "Resolutions" msgstr "" #: Xconfig/resolution_and_depth.pm:309 diskdrake/hd_gtk.pm:336 install_steps_gtk.pm:288 mouse.pm:168 services.pm:162 standalone/drakbackup:1586 standalone/drakperm:250 #, c-format msgid "Other" msgstr "" #: Xconfig/resolution_and_depth.pm:358 #, c-format msgid "Choose the resolution and the color depth" msgstr "" #: Xconfig/resolution_and_depth.pm:359 #, c-format msgid "Graphics card: %s" msgstr "" #: Xconfig/resolution_and_depth.pm:373 interactive.pm:119 interactive.pm:436 interactive/http.pm:103 interactive/http.pm:156 interactive/newt.pm:321 interactive/stdio.pm:39 interactive/stdio.pm:142 interactive/stdio.pm:143 standalone/drakTermServ:195 standalone/drakTermServ:515 standalone/drakbackup:1350 standalone/drakbackup:3975 standalone/drakbackup:4035 standalone/drakbackup:4079 standalone/drakconnect:158 standalone/drakconnect:852 standalone/drakconnect:939 standalone/drakconnect:1030 standalone/drakfont:575 standalone/drakfont:585 standalone/draksplash:173 standalone/drakups:212 standalone/net_monitor:339 ugtk2.pm:392 ugtk2.pm:490 ugtk2.pm:899 ugtk2.pm:922 #, c-format msgid "Ok" msgstr "" #: Xconfig/resolution_and_depth.pm:373 diskdrake/smbnfs_gtk.pm:80 help.pm:89 help.pm:444 install_steps_gtk.pm:458 install_steps_interactive.pm:429 install_steps_interactive.pm:834 interactive.pm:120 interactive.pm:437 interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318 interactive/stdio.pm:39 interactive/stdio.pm:142 printer/printerdrake.pm:3971 standalone/drakautoinst:215 standalone/drakbackup:1350 standalone/drakbackup:3901 standalone/drakbackup:3905 standalone/drakbackup:3963 standalone/drakconnect:157 standalone/drakconnect:937 standalone/drakconnect:1029 standalone/drakfont:585 standalone/drakfont:663 standalone/drakfont:740 standalone/draksplash:173 standalone/drakups:219 standalone/logdrake:176 standalone/net_monitor:338 ugtk2.pm:386 ugtk2.pm:488 ugtk2.pm:497 ugtk2.pm:899 #, c-format msgid "Cancel" msgstr "" #: Xconfig/resolution_and_depth.pm:373 diskdrake/hd_gtk.pm:150 install_steps_gtk.pm:232 install_steps_gtk.pm:620 interactive.pm:567 interactive/gtk.pm:681 interactive/gtk.pm:683 standalone/drakTermServ:284 standalone/drakbackup:3897 standalone/drakbug:105 standalone/drakconnect:153 standalone/drakconnect:236 standalone/drakfont:510 standalone/draknfs:206 standalone/drakperm:133 standalone/draksambashare:314 standalone/draksec:342 standalone/draksec:344 standalone/draksec:362 standalone/draksec:364 ugtk2.pm:1031 ugtk2.pm:1032 #, c-format msgid "Help" msgstr "" #: Xconfig/test.pm:30 #, c-format msgid "Test of the configuration" msgstr "" #: Xconfig/test.pm:31 #, c-format msgid "Do you want to test the configuration?" msgstr "" #: Xconfig/test.pm:31 #, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "" #: Xconfig/test.pm:69 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" #: Xconfig/test.pm:129 #, c-format msgid "Leaving in %d seconds" msgstr "" #: Xconfig/test.pm:129 #, c-format msgid "Is this the correct setting?" msgstr "" #: Xconfig/various.pm:29 #, c-format msgid "" "Keyboard layout: %s\n" "" msgstr "" #: Xconfig/various.pm:30 #, c-format msgid "" "Mouse type: %s\n" "" msgstr "" #: Xconfig/various.pm:31 #, c-format msgid "" "Mouse device: %s\n" "" msgstr "" #: Xconfig/various.pm:33 #, c-format msgid "" "Monitor: %s\n" "" msgstr "" #: Xconfig/various.pm:34 #, c-format msgid "" "Monitor HorizSync: %s\n" "" msgstr "" #: Xconfig/various.pm:35 #, c-format msgid "" "Monitor VertRefresh: %s\n" "" msgstr "" #: Xconfig/various.pm:37 #, c-format msgid "" "Graphics card: %s\n" "" msgstr "" #: Xconfig/various.pm:38 #, c-format msgid "" "Graphics memory: %s kB\n" "" msgstr "" #: Xconfig/various.pm:40 #, c-format msgid "" "Color depth: %s\n" "" msgstr "" #: Xconfig/various.pm:41 #, c-format msgid "" "Resolution: %s\n" "" msgstr "" #: Xconfig/various.pm:43 #, c-format msgid "" "Xorg driver: %s\n" "" msgstr "" #: Xconfig/various.pm:72 #, c-format msgid "Graphical interface at startup" msgstr "" #: Xconfig/various.pm:74 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface (Xorg) upon booting.\n" "Would you like Xorg to start when you reboot?" msgstr "" #: Xconfig/various.pm:87 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" #: Xconfig/various.pm:99 #, c-format msgid "What norm is your TV using?" msgstr "" #: Xconfig/xfree.pm:648 #, c-format msgid "" "_:weird aspect ratio\n" "other" msgstr "" #: any.pm:142 harddrake/sound.pm:192 interactive.pm:474 pkgs.pm:473 standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68 standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:246 standalone/service_harddrake:207 #, c-format msgid "Please wait" msgstr "" #: any.pm:142 #, c-format msgid "Bootloader installation in progress" msgstr "" #: any.pm:153 #, c-format msgid "" "LILO wants to assign a new Volume ID to drive %s. However, changing\n" "the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows error.\n" "This caution does not apply to Windows 95 or 98, or to NT data disks.\n" "\n" "Assign a new Volume ID?" msgstr "" #: any.pm:164 #, c-format msgid "Installation of bootloader failed. The following error occurred:" msgstr "" #: any.pm:170 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you do not see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" #: any.pm:208 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: System Commander).\n" "\n" "On which drive are you booting?" msgstr "" #: any.pm:231 help.pm:739 #, c-format msgid "First sector of drive (MBR)" msgstr "" #: any.pm:232 #, c-format msgid "First sector of the root partition" msgstr "" #: any.pm:234 #, c-format msgid "On Floppy" msgstr "" #: any.pm:236 help.pm:739 printer/printerdrake.pm:4357 #, c-format msgid "Skip" msgstr "" #: any.pm:240 #, c-format msgid "LILO/grub Installation" msgstr "" #: any.pm:241 #, c-format msgid "Where do you want to install the bootloader?" msgstr "" #: any.pm:267 standalone/drakboot:269 #, c-format msgid "Boot Style Configuration" msgstr "" #: any.pm:269 any.pm:270 any.pm:303 any.pm:304 #, c-format msgid "Bootloader main options" msgstr "" #: any.pm:275 #, c-format msgid "Give the ram size in MB" msgstr "" #: any.pm:277 #, c-format msgid "Option ``Restrict command line options'' is of no use without a password" msgstr "" #: any.pm:278 any.pm:615 authentication.pm:181 #, c-format msgid "The passwords do not match" msgstr "" #: any.pm:278 any.pm:615 authentication.pm:181 diskdrake/interactive.pm:1326 #, c-format msgid "Please try again" msgstr "" #: any.pm:283 any.pm:308 #, c-format msgid "Bootloader to use" msgstr "" #: any.pm:285 any.pm:310 #, c-format msgid "Boot device" msgstr "" #: any.pm:287 #, c-format msgid "Delay before booting default image" msgstr "" #: any.pm:288 #, c-format msgid "Enable ACPI" msgstr "" #: any.pm:290 #, c-format msgid "Force no APIC" msgstr "" #: any.pm:292 #, c-format msgid "Force No Local APIC" msgstr "" #: any.pm:294 any.pm:650 authentication.pm:186 diskdrake/smbnfs_gtk.pm:180 network/netconnect.pm:568 printer/printerdrake.pm:1888 printer/printerdrake.pm:2009 standalone/drakbackup:1630 standalone/drakbackup:3504 standalone/drakups:299 #, c-format msgid "Password" msgstr "" #: any.pm:295 any.pm:651 authentication.pm:187 #, c-format msgid "Password (again)" msgstr "" #: any.pm:296 #, c-format msgid "Restrict command line options" msgstr "" #: any.pm:296 #, c-format msgid "restrict" msgstr "" #: any.pm:298 #, c-format msgid "Clean /tmp at each boot" msgstr "" #: any.pm:299 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "" #: any.pm:309 #, c-format msgid "Init Message" msgstr "" #: any.pm:311 #, c-format msgid "Open Firmware Delay" msgstr "" #: any.pm:312 #, c-format msgid "Kernel Boot Timeout" msgstr "" #: any.pm:313 #, c-format msgid "Enable CD Boot?" msgstr "" #: any.pm:314 #, c-format msgid "Enable OF Boot?" msgstr "" #: any.pm:315 #, c-format msgid "Default OS?" msgstr "" #: any.pm:369 #, c-format msgid "Image" msgstr "" #: any.pm:370 any.pm:380 #, c-format msgid "Root" msgstr "" #: any.pm:371 any.pm:393 #, c-format msgid "Append" msgstr "" #: any.pm:373 standalone/drakboot:271 standalone/drakboot:275 #, c-format msgid "Video mode" msgstr "" #: any.pm:375 #, c-format msgid "Initrd" msgstr "" #: any.pm:376 #, c-format msgid "Network profile" msgstr "" #: any.pm:385 any.pm:390 any.pm:392 #, c-format msgid "Label" msgstr "" #: any.pm:387 any.pm:397 harddrake/v4l.pm:368 standalone/draksec:52 #, c-format msgid "Default" msgstr "" #: any.pm:394 #, c-format msgid "Initrd-size" msgstr "" #: any.pm:396 #, c-format msgid "NoVideo" msgstr "" #: any.pm:407 #, c-format msgid "Empty label not allowed" msgstr "" #: any.pm:408 #, c-format msgid "You must specify a kernel image" msgstr "" #: any.pm:408 #, c-format msgid "You must specify a root partition" msgstr "" #: any.pm:409 #, c-format msgid "This label is already used" msgstr "" #: any.pm:423 #, c-format msgid "Which type of entry do you want to add?" msgstr "" #: any.pm:424 #, c-format msgid "Linux" msgstr "" #: any.pm:424 #, c-format msgid "Other OS (SunOS...)" msgstr "" #: any.pm:425 #, c-format msgid "Other OS (MacOS...)" msgstr "" #: any.pm:425 #, c-format msgid "Other OS (Windows...)" msgstr "" #: any.pm:453 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" #: any.pm:601 #, c-format msgid "access to X programs" msgstr "" #: any.pm:602 #, c-format msgid "access to rpm tools" msgstr "" #: any.pm:603 #, c-format msgid "allow \"su\"" msgstr "" #: any.pm:604 #, c-format msgid "access to administrative files" msgstr "" #: any.pm:605 #, c-format msgid "access to network tools" msgstr "" #: any.pm:606 #, c-format msgid "access to compilation tools" msgstr "" #: any.pm:611 #, c-format msgid "(already added %s)" msgstr "" #: any.pm:616 #, c-format msgid "This password is too simple" msgstr "" #: any.pm:617 #, c-format msgid "Please give a user name" msgstr "" #: any.pm:618 #, c-format msgid "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" #: any.pm:619 #, c-format msgid "The user name is too long" msgstr "" #: any.pm:620 #, c-format msgid "This user name has already been added" msgstr "" #: any.pm:621 any.pm:653 #, c-format msgid "User ID" msgstr "" #: any.pm:622 any.pm:654 #, c-format msgid "Group ID" msgstr "" #: any.pm:625 #, c-format msgid "%s must be a number" msgstr "" #: any.pm:626 #, c-format msgid "%s should be above 500. Accept anyway?" msgstr "" #: any.pm:631 standalone/draksambashare:1210 #, c-format msgid "Add user" msgstr "" #: any.pm:633 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" #: any.pm:636 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154 diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530 interactive/http.pm:151 printer/printerdrake.pm:197 printer/printerdrake.pm:382 printer/printerdrake.pm:5165 standalone/drakbackup:2717 standalone/scannerdrake:668 standalone/scannerdrake:818 #, c-format msgid "Done" msgstr "" #: any.pm:637 help.pm:51 #, c-format msgid "Accept user" msgstr "" #: any.pm:648 #, c-format msgid "Real name" msgstr "" #: any.pm:649 standalone/drakbackup:1625 #, c-format msgid "Login name" msgstr "" #: any.pm:652 #, c-format msgid "Shell" msgstr "" #: any.pm:656 #, c-format msgid "Icon" msgstr "" #: any.pm:703 security/l10n.pm:14 #, c-format msgid "Autologin" msgstr "" #: any.pm:704 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "" #: any.pm:705 #, c-format msgid "Use this feature" msgstr "" #: any.pm:706 #, c-format msgid "Choose the default user:" msgstr "" #: any.pm:707 #, c-format msgid "Choose the window manager to run:" msgstr "" #: any.pm:719 any.pm:787 #, c-format msgid "Please choose a language to use." msgstr "" #: any.pm:720 any.pm:788 #, c-format msgid "Language choice" msgstr "" #: any.pm:748 #, c-format msgid "" "Mandriva Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" #: any.pm:751 #, c-format msgid "Multi languages" msgstr "" #: any.pm:767 any.pm:796 help.pm:647 #, c-format msgid "Use Unicode by default" msgstr "" #: any.pm:768 help.pm:647 #, c-format msgid "All languages" msgstr "" #: any.pm:840 help.pm:566 help.pm:855 install_steps_interactive.pm:955 #, c-format msgid "Country / Region" msgstr "" #: any.pm:842 #, c-format msgid "Please choose your country." msgstr "" #: any.pm:844 #, c-format msgid "Here is the full list of available countries" msgstr "" #: any.pm:845 #, c-format msgid "Other Countries" msgstr "" #: any.pm:845 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722 interactive.pm:397 #, c-format msgid "Advanced" msgstr "" #: any.pm:853 #, c-format msgid "Input method:" msgstr "" #: any.pm:856 install_any.pm:417 network/netconnect.pm:306 network/netconnect.pm:311 network/netconnect.pm:1205 network/wireless.pm:7 printer/printerdrake.pm:105 printer/printerdrake.pm:2430 printer/printerdrake.pm:2430 #, c-format msgid "None" msgstr "" #: any.pm:973 #, c-format msgid "No sharing" msgstr "" #: any.pm:973 #, c-format msgid "Allow all users" msgstr "" #: any.pm:977 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" "" msgstr "" #: any.pm:989 #, c-format msgid "NFS: the traditional Unix file sharing system, with less support on Mac and Windows." msgstr "" #: any.pm:992 #, c-format msgid "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux systems." msgstr "" #: any.pm:1000 #, c-format msgid "You can export using NFS or SMB. Please select which you would like to use." msgstr "" #: any.pm:1025 #, c-format msgid "Launch userdrake" msgstr "" #: any.pm:1025 printer/printerdrake.pm:4196 printer/printerdrake.pm:4199 printer/printerdrake.pm:4200 printer/printerdrake.pm:4201 printer/printerdrake.pm:5483 standalone/drakTermServ:294 standalone/drakbackup:4097 standalone/drakbug:126 standalone/drakfont:498 standalone/drakids:64 standalone/drakids:77 standalone/drakids:85 standalone/draknfs:210 standalone/net_monitor:117 standalone/printerdrake:583 #, c-format msgid "Close" msgstr "" #: any.pm:1027 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" #: authentication.pm:23 #, c-format msgid "Local file" msgstr "" #: authentication.pm:24 #, c-format msgid "LDAP" msgstr "" #: authentication.pm:25 #, c-format msgid "NIS" msgstr "" #: authentication.pm:26 #, c-format msgid "Smart Card" msgstr "" #: authentication.pm:27 authentication.pm:152 #, c-format msgid "Windows Domain" msgstr "" #: authentication.pm:28 #, c-format msgid "Active Directory with SFU" msgstr "" #: authentication.pm:29 #, c-format msgid "Active Directory with Winbind" msgstr "" #: authentication.pm:55 #, c-format msgid "Local file:" msgstr "" #: authentication.pm:55 #, c-format msgid "Use local for all authentication and information user tell in local file" msgstr "" #: authentication.pm:56 #, c-format msgid "LDAP:" msgstr "" #: authentication.pm:56 #, c-format msgid "Tells your computer to use LDAP for some or all authentication. LDAP consolidates certain types of information within your organization." msgstr "" #: authentication.pm:57 #, c-format msgid "NIS:" msgstr "" #: authentication.pm:57 #, c-format msgid "Allows you to run a group of computers in the same Network Information Service domain with a common password and group file." msgstr "" #: authentication.pm:58 #, c-format msgid "Windows Domain:" msgstr "" #: authentication.pm:58 #, c-format msgid "iWinbind allows the system to retrieve information and authenticate users in a Windows domain." msgstr "" #: authentication.pm:59 #, c-format msgid "Active Directory with SFU:" msgstr "" #: authentication.pm:59 #, c-format msgid "With Kerberos and Ldap for authentication in Active Directory Server " msgstr "" #: authentication.pm:60 #, c-format msgid "Active Directory with Winbind:" msgstr "" #: authentication.pm:60 #, c-format msgid "Winbind allows the system to authenticate users in a Windows Active Directory Server." msgstr "" #: authentication.pm:85 #, c-format msgid "Authentication LDAP" msgstr "" #: authentication.pm:86 #, c-format msgid "LDAP Base dn" msgstr "" #: authentication.pm:87 share/compssUsers.pl:102 #, c-format msgid "LDAP Server" msgstr "" #: authentication.pm:100 fsedit.pm:23 #, c-format msgid "simple" msgstr "" #: authentication.pm:101 #, c-format msgid "TLS" msgstr "" #: authentication.pm:102 #, c-format msgid "SSL" msgstr "" #: authentication.pm:103 #, c-format msgid "security layout (SASL/Kerberos)" msgstr "" #: authentication.pm:110 authentication.pm:148 #, c-format msgid "Authentication Active Directory" msgstr "" #: authentication.pm:111 diskdrake/smbnfs_gtk.pm:181 #, c-format msgid "Domain" msgstr "" #: authentication.pm:113 diskdrake/dav.pm:63 help.pm:146 printer/printerdrake.pm:141 share/compssUsers.pl:82 standalone/drakTermServ:269 #, c-format msgid "Server" msgstr "" #: authentication.pm:114 #, c-format msgid "LDAP users database" msgstr "" #: authentication.pm:115 #, c-format msgid "Use Anonymous BIND " msgstr "" #: authentication.pm:116 #, c-format msgid "LDAP user allowed to browse the Active Directory" msgstr "" #: authentication.pm:117 #, c-format msgid "Password for user" msgstr "" #: authentication.pm:129 #, c-format msgid "Authentication NIS" msgstr "" #: authentication.pm:130 #, c-format msgid "NIS Domain" msgstr "" #: authentication.pm:131 #, c-format msgid "NIS Server" msgstr "" #: authentication.pm:136 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are good." msgstr "" #: authentication.pm:148 #, c-format msgid "Authentication Windows Domain" msgstr "" #: authentication.pm:150 #, c-format msgid "Active Directory Realm " msgstr "" #: authentication.pm:153 #, c-format msgid "Domain Admin User Name" msgstr "" #: authentication.pm:154 #, c-format msgid "Domain Admin Password" msgstr "" #: authentication.pm:170 #, c-format msgid "Set administrator (root) password and network authentication methods" msgstr "" #: authentication.pm:171 #, c-format msgid "Set administrator (root) password" msgstr "" #: authentication.pm:172 standalone/drakvpn:1111 #, c-format msgid "Authentication method" msgstr "" #. -PO: keep this short or else the buttons will not fit in the window #: authentication.pm:177 help.pm:722 #, c-format msgid "No password" msgstr "" #: authentication.pm:183 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "" #: authentication.pm:188 network/netconnect.pm:311 network/netconnect.pm:569 standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481 #, c-format msgid "Authentication" msgstr "" #: authentication.pm:307 #, c-format msgid "Can not use broadcast with no NIS domain" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: bootloader.pm:764 #, c-format msgid "" "Welcome to the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait for default boot.\n" "\n" "" msgstr "" #: bootloader.pm:904 #, c-format msgid "LILO with graphical menu" msgstr "" #: bootloader.pm:905 #, c-format msgid "LILO with text menu" msgstr "" #: bootloader.pm:906 #, c-format msgid "GRUB with graphical menu" msgstr "" #: bootloader.pm:907 #, c-format msgid "GRUB with text menu" msgstr "" #: bootloader.pm:908 #, c-format msgid "Yaboot" msgstr "" #: bootloader.pm:986 #, c-format msgid "not enough room in /boot" msgstr "" #: bootloader.pm:1476 #, c-format msgid "" "You can not install the bootloader on a %s partition\n" "" msgstr "" #: bootloader.pm:1516 #, c-format msgid "Your bootloader configuration must be updated because partition has been renumbered" msgstr "" #: bootloader.pm:1529 #, c-format msgid "The bootloader can not be installed correctly. You have to boot rescue and choose \"%s\"" msgstr "" #: bootloader.pm:1530 #, c-format msgid "Re-install Boot Loader" msgstr "" #: common.pm:131 #, c-format msgid "KB" msgstr "" #: common.pm:131 #, c-format msgid "MB" msgstr "" #: common.pm:131 #, c-format msgid "GB" msgstr "" #: common.pm:139 #, c-format msgid "TB" msgstr "" #: common.pm:147 #, c-format msgid "%d minutes" msgstr "" #: common.pm:149 #, c-format msgid "1 minute" msgstr "" #: common.pm:151 #, c-format msgid "%d seconds" msgstr "" #: common.pm:257 #, c-format msgid "kdesu missing" msgstr "" #: common.pm:260 #, c-format msgid "consolehelper missing" msgstr "" #: crypto.pm:13 crypto.pm:48 lang.pm:207 network/adsl_consts.pm:66 network/adsl_consts.pm:75 network/adsl_consts.pm:84 #, c-format msgid "Austria" msgstr "" #: crypto.pm:14 crypto.pm:47 lang.pm:208 standalone/drakxtv:48 #, c-format msgid "Australia" msgstr "" #: crypto.pm:15 crypto.pm:49 lang.pm:214 network/adsl_consts.pm:93 network/adsl_consts.pm:102 network/adsl_consts.pm:114 network/adsl_consts.pm:123 network/netconnect.pm:44 #, c-format msgid "Belgium" msgstr "" #: crypto.pm:16 crypto.pm:50 lang.pm:223 network/adsl_consts.pm:132 network/adsl_consts.pm:143 network/adsl_consts.pm:152 network/adsl_consts.pm:161 #, c-format msgid "Brazil" msgstr "" #: crypto.pm:17 crypto.pm:51 lang.pm:230 #, c-format msgid "Canada" msgstr "" #: crypto.pm:18 crypto.pm:74 lang.pm:235 network/adsl_consts.pm:891 network/adsl_consts.pm:900 network/adsl_consts.pm:911 #, c-format msgid "Switzerland" msgstr "" #: crypto.pm:19 lang.pm:242 #, c-format msgid "Costa Rica" msgstr "" #: crypto.pm:20 crypto.pm:52 lang.pm:248 network/adsl_consts.pm:368 #, c-format msgid "Czech Republic" msgstr "" #: crypto.pm:21 crypto.pm:57 lang.pm:249 network/adsl_consts.pm:499 network/adsl_consts.pm:508 #, c-format msgid "Germany" msgstr "" #: crypto.pm:22 crypto.pm:53 lang.pm:251 network/adsl_consts.pm:378 #, c-format msgid "Denmark" msgstr "" #: crypto.pm:23 crypto.pm:54 lang.pm:256 #, c-format msgid "Estonia" msgstr "" #: crypto.pm:24 crypto.pm:72 lang.pm:260 network/adsl_consts.pm:759 network/adsl_consts.pm:770 network/adsl_consts.pm:781 network/adsl_consts.pm:792 network/adsl_consts.pm:801 network/adsl_consts.pm:810 network/adsl_consts.pm:819 network/adsl_consts.pm:828 network/adsl_consts.pm:837 network/adsl_consts.pm:846 network/adsl_consts.pm:855 network/adsl_consts.pm:864 network/adsl_consts.pm:873 #, c-format msgid "Spain" msgstr "" #: crypto.pm:25 crypto.pm:55 lang.pm:262 network/adsl_consts.pm:387 #, c-format msgid "Finland" msgstr "" #: crypto.pm:26 crypto.pm:56 lang.pm:267 network/adsl_consts.pm:396 network/adsl_consts.pm:408 network/adsl_consts.pm:420 network/adsl_consts.pm:431 network/adsl_consts.pm:442 network/adsl_consts.pm:454 network/adsl_consts.pm:466 network/adsl_consts.pm:477 network/adsl_consts.pm:488 network/netconnect.pm:41 #, c-format msgid "France" msgstr "" #: crypto.pm:27 crypto.pm:58 lang.pm:280 network/adsl_consts.pm:519 #, c-format msgid "Greece" msgstr "" #: crypto.pm:28 crypto.pm:59 lang.pm:291 network/adsl_consts.pm:528 #, c-format msgid "Hungary" msgstr "" #: crypto.pm:29 crypto.pm:60 lang.pm:293 network/adsl_consts.pm:537 standalone/drakxtv:47 #, c-format msgid "Ireland" msgstr "" #: crypto.pm:30 crypto.pm:61 lang.pm:294 network/adsl_consts.pm:546 #, c-format msgid "Israel" msgstr "" #: crypto.pm:31 crypto.pm:62 lang.pm:300 network/adsl_consts.pm:557 network/adsl_consts.pm:569 network/adsl_consts.pm:580 network/adsl_consts.pm:589 network/netconnect.pm:43 standalone/drakxtv:47 #, c-format msgid "Italy" msgstr "" #: crypto.pm:32 crypto.pm:63 lang.pm:303 #, c-format msgid "Japan" msgstr "" #: crypto.pm:33 crypto.pm:64 lang.pm:352 network/adsl_consts.pm:620 network/adsl_consts.pm:629 network/adsl_consts.pm:638 network/adsl_consts.pm:647 network/netconnect.pm:42 #, c-format msgid "Netherlands" msgstr "" #: crypto.pm:34 crypto.pm:66 lang.pm:353 network/adsl_consts.pm:656 network/adsl_consts.pm:661 network/adsl_consts.pm:666 network/adsl_consts.pm:671 network/adsl_consts.pm:676 network/adsl_consts.pm:681 network/adsl_consts.pm:686 #, c-format msgid "Norway" msgstr "" #: crypto.pm:35 crypto.pm:65 lang.pm:357 #, c-format msgid "New Zealand" msgstr "" #: crypto.pm:36 crypto.pm:67 lang.pm:365 network/adsl_consts.pm:693 network/adsl_consts.pm:704 #, c-format msgid "Poland" msgstr "" #: crypto.pm:37 crypto.pm:68 lang.pm:370 network/adsl_consts.pm:716 #, c-format msgid "Portugal" msgstr "" #: crypto.pm:38 crypto.pm:69 lang.pm:376 network/adsl_consts.pm:725 #, c-format msgid "Russia" msgstr "" #: crypto.pm:39 crypto.pm:73 lang.pm:382 network/adsl_consts.pm:882 #, c-format msgid "Sweden" msgstr "" #: crypto.pm:40 crypto.pm:70 lang.pm:387 #, c-format msgid "Slovakia" msgstr "" #: crypto.pm:41 crypto.pm:76 lang.pm:401 network/adsl_consts.pm:920 #, c-format msgid "Thailand" msgstr "" #: crypto.pm:42 crypto.pm:75 lang.pm:411 #, c-format msgid "Taiwan" msgstr "" #: crypto.pm:43 crypto.pm:71 lang.pm:430 standalone/drakxtv:49 #, c-format msgid "South Africa" msgstr "" #: crypto.pm:77 crypto.pm:112 lang.pm:416 network/netconnect.pm:45 #, c-format msgid "United States" msgstr "" #: diskdrake/dav.pm:17 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" #: diskdrake/dav.pm:25 #, c-format msgid "New" msgstr "" #: diskdrake/dav.pm:61 diskdrake/interactive.pm:454 diskdrake/smbnfs_gtk.pm:74 #, c-format msgid "Unmount" msgstr "" #: diskdrake/dav.pm:62 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75 #, c-format msgid "Mount" msgstr "" #: diskdrake/dav.pm:64 diskdrake/interactive.pm:446 diskdrake/interactive.pm:670 diskdrake/interactive.pm:689 diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78 #, c-format msgid "Mount point" msgstr "" #: diskdrake/dav.pm:83 #, c-format msgid "Please enter the WebDAV server URL" msgstr "" #: diskdrake/dav.pm:87 #, c-format msgid "The URL must begin with http:// or https://" msgstr "" #: diskdrake/dav.pm:109 #, c-format msgid "Server: " msgstr "" #: diskdrake/dav.pm:110 diskdrake/interactive.pm:521 diskdrake/interactive.pm:1208 diskdrake/interactive.pm:1286 #, c-format msgid "Mount point: " msgstr "" #: diskdrake/dav.pm:111 diskdrake/interactive.pm:1293 #, c-format msgid "Options: %s" msgstr "" #: diskdrake/hd_gtk.pm:92 #, c-format msgid "Please make a backup of your data first" msgstr "" #: diskdrake/hd_gtk.pm:95 #, c-format msgid "" "If you plan to use aboot, be careful to leave a free space (2048 sectors is enough)\n" "at the beginning of the disk" msgstr "" #: diskdrake/hd_gtk.pm:152 help.pm:530 #, c-format msgid "Wizard" msgstr "" #: diskdrake/hd_gtk.pm:185 #, c-format msgid "Choose action" msgstr "" #: diskdrake/hd_gtk.pm:189 #, c-format msgid "" "You have one big Microsoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" #: diskdrake/hd_gtk.pm:191 #, c-format msgid "Please click on a partition" msgstr "" #: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:460 standalone/drakbackup:2952 standalone/drakbackup:3012 #, c-format msgid "Details" msgstr "" #: diskdrake/hd_gtk.pm:251 #, c-format msgid "No hard drives found" msgstr "" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Ext2" msgstr "" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Journalised FS" msgstr "" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Swap" msgstr "" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "SunOS" msgstr "" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "HFS" msgstr "" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Windows" msgstr "" #: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1223 #, c-format msgid "Empty" msgstr "" #: diskdrake/hd_gtk.pm:340 #, c-format msgid "Filesystem types:" msgstr "" #: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:359 diskdrake/hd_gtk.pm:365 #, c-format msgid "Use ``%s'' instead" msgstr "" #: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:470 #, c-format msgid "Create" msgstr "" #: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365 diskdrake/interactive.pm:447 diskdrake/interactive.pm:623 diskdrake/removable.pm:25 diskdrake/removable.pm:48 standalone/harddrake2:108 standalone/harddrake2:117 #, c-format msgid "Type" msgstr "" #. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE #: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:455 standalone/drakperm:123 standalone/printerdrake:248 #, c-format msgid "Delete" msgstr "" #: diskdrake/hd_gtk.pm:365 #, c-format msgid "Use ``Unmount'' first" msgstr "" #: diskdrake/interactive.pm:194 #, c-format msgid "Choose another partition" msgstr "" #: diskdrake/interactive.pm:194 #, c-format msgid "Choose a partition" msgstr "" #: diskdrake/interactive.pm:223 #, c-format msgid "Exit" msgstr "" #: diskdrake/interactive.pm:256 help.pm:530 #, c-format msgid "Undo" msgstr "" #: diskdrake/interactive.pm:256 #, c-format msgid "Toggle to normal mode" msgstr "" #: diskdrake/interactive.pm:256 #, c-format msgid "Toggle to expert mode" msgstr "" #: diskdrake/interactive.pm:275 #, c-format msgid "Continue anyway?" msgstr "" #: diskdrake/interactive.pm:280 #, c-format msgid "Quit without saving" msgstr "" #: diskdrake/interactive.pm:280 #, c-format msgid "Quit without writing the partition table?" msgstr "" #: diskdrake/interactive.pm:285 #, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "" #: diskdrake/interactive.pm:292 install_steps_interactive.pm:340 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "" #: diskdrake/interactive.pm:297 #, c-format msgid "" "You should format partition %s.\n" "Otherwise no entry for mount point %s will be written in fstab.\n" "Quit anyway?" msgstr "" #: diskdrake/interactive.pm:310 help.pm:530 #, c-format msgid "Clear all" msgstr "" #: diskdrake/interactive.pm:311 help.pm:530 #, c-format msgid "Auto allocate" msgstr "" #: diskdrake/interactive.pm:312 help.pm:530 help.pm:566 help.pm:606 help.pm:855 install_steps_interactive.pm:123 #, c-format msgid "More" msgstr "" #: diskdrake/interactive.pm:317 #, c-format msgid "Hard drive information" msgstr "" #: diskdrake/interactive.pm:349 #, c-format msgid "All primary partitions are used" msgstr "" #: diskdrake/interactive.pm:350 #, c-format msgid "I can not add any more partitions" msgstr "" #: diskdrake/interactive.pm:351 #, c-format msgid "To have more partitions, please delete one to be able to create an extended partition" msgstr "" #: diskdrake/interactive.pm:360 #, c-format msgid "No supermount" msgstr "" #: diskdrake/interactive.pm:361 #, c-format msgid "Supermount" msgstr "" #: diskdrake/interactive.pm:362 #, c-format msgid "Supermount except for CDROM drives" msgstr "" #: diskdrake/interactive.pm:368 help.pm:530 #, c-format msgid "Save partition table" msgstr "" #: diskdrake/interactive.pm:369 help.pm:530 #, c-format msgid "Restore partition table" msgstr "" #: diskdrake/interactive.pm:370 help.pm:530 #, c-format msgid "Rescue partition table" msgstr "" #: diskdrake/interactive.pm:372 help.pm:530 #, c-format msgid "Reload partition table" msgstr "" #: diskdrake/interactive.pm:374 #, c-format msgid "Removable media automounting" msgstr "" #: diskdrake/interactive.pm:387 diskdrake/interactive.pm:413 #, c-format msgid "Select file" msgstr "" #: diskdrake/interactive.pm:399 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" #: diskdrake/interactive.pm:428 #, c-format msgid "Trying to rescue partition table" msgstr "" #: diskdrake/interactive.pm:434 #, c-format msgid "Detailed information" msgstr "" #: diskdrake/interactive.pm:449 diskdrake/interactive.pm:760 #, c-format msgid "Resize" msgstr "" #: diskdrake/interactive.pm:450 #, c-format msgid "Format" msgstr "" #: diskdrake/interactive.pm:452 #, c-format msgid "Add to RAID" msgstr "" #: diskdrake/interactive.pm:453 #, c-format msgid "Add to LVM" msgstr "" #: diskdrake/interactive.pm:456 #, c-format msgid "Remove from RAID" msgstr "" #: diskdrake/interactive.pm:457 #, c-format msgid "Remove from LVM" msgstr "" #: diskdrake/interactive.pm:458 #, c-format msgid "Modify RAID" msgstr "" #: diskdrake/interactive.pm:459 #, c-format msgid "Use for loopback" msgstr "" #: diskdrake/interactive.pm:514 #, c-format msgid "Create a new partition" msgstr "" #: diskdrake/interactive.pm:517 #, c-format msgid "Start sector: " msgstr "" #: diskdrake/interactive.pm:519 diskdrake/interactive.pm:929 #, c-format msgid "Size in MB: " msgstr "" #: diskdrake/interactive.pm:520 diskdrake/interactive.pm:930 #, c-format msgid "Filesystem type: " msgstr "" #: diskdrake/interactive.pm:525 #, c-format msgid "Preference: " msgstr "" #: diskdrake/interactive.pm:528 #, c-format msgid "Logical volume name " msgstr "" #: diskdrake/interactive.pm:558 #, c-format msgid "" "You can not create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" #: diskdrake/interactive.pm:588 #, c-format msgid "Remove the loopback file?" msgstr "" #: diskdrake/interactive.pm:607 #, c-format msgid "After changing type of partition %s, all data on this partition will be lost" msgstr "" #: diskdrake/interactive.pm:619 #, c-format msgid "Change partition type" msgstr "" #: diskdrake/interactive.pm:620 diskdrake/removable.pm:47 #, c-format msgid "Which filesystem do you want?" msgstr "" #: diskdrake/interactive.pm:628 #, c-format msgid "Switching from ext2 to ext3" msgstr "" #: diskdrake/interactive.pm:657 #, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "" #: diskdrake/interactive.pm:658 #, c-format msgid "Where do you want to mount device %s?" msgstr "" #: diskdrake/interactive.pm:663 #, c-format msgid "" "Can not unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" #: diskdrake/interactive.pm:688 #, c-format msgid "Where do you want to mount %s?" msgstr "" #: diskdrake/interactive.pm:712 diskdrake/interactive.pm:791 install_interactive.pm:156 install_interactive.pm:188 #, c-format msgid "Resizing" msgstr "" #: diskdrake/interactive.pm:712 #, c-format msgid "Computing FAT filesystem bounds" msgstr "" #: diskdrake/interactive.pm:748 #, c-format msgid "This partition is not resizeable" msgstr "" #: diskdrake/interactive.pm:753 #, c-format msgid "All data on this partition should be backed-up" msgstr "" #: diskdrake/interactive.pm:755 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" #: diskdrake/interactive.pm:760 #, c-format msgid "Choose the new size" msgstr "" #: diskdrake/interactive.pm:761 #, c-format msgid "New size in MB: " msgstr "" #: diskdrake/interactive.pm:802 install_interactive.pm:196 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" #: diskdrake/interactive.pm:843 #, c-format msgid "Choose an existing RAID to add to" msgstr "" #: diskdrake/interactive.pm:845 diskdrake/interactive.pm:862 #, c-format msgid "new" msgstr "" #: diskdrake/interactive.pm:860 #, c-format msgid "Choose an existing LVM to add to" msgstr "" #: diskdrake/interactive.pm:866 #, c-format msgid "LVM name?" msgstr "" #: diskdrake/interactive.pm:894 #, c-format msgid "" "Physical volume %s is still in use.\n" "Do you want to move used physical extents on this volume to other volumes?" msgstr "" #: diskdrake/interactive.pm:896 #, c-format msgid "Moving physical extents" msgstr "" #: diskdrake/interactive.pm:914 #, c-format msgid "This partition can not be used for loopback" msgstr "" #: diskdrake/interactive.pm:927 #, c-format msgid "Loopback" msgstr "" #: diskdrake/interactive.pm:928 #, c-format msgid "Loopback file name: " msgstr "" #: diskdrake/interactive.pm:933 #, c-format msgid "Give a file name" msgstr "" #: diskdrake/interactive.pm:936 #, c-format msgid "File is already used by another loopback, choose another one" msgstr "" #: diskdrake/interactive.pm:937 #, c-format msgid "File already exists. Use it?" msgstr "" #: diskdrake/interactive.pm:960 #, c-format msgid "Mount options" msgstr "" #: diskdrake/interactive.pm:967 #, c-format msgid "Various" msgstr "" #: diskdrake/interactive.pm:1034 #, c-format msgid "device" msgstr "" #: diskdrake/interactive.pm:1035 #, c-format msgid "level" msgstr "" #: diskdrake/interactive.pm:1036 #, c-format msgid "chunk size in KiB" msgstr "" #: diskdrake/interactive.pm:1053 #, c-format msgid "Be careful: this operation is dangerous." msgstr "" #: diskdrake/interactive.pm:1068 #, c-format msgid "What type of partitioning?" msgstr "" #: diskdrake/interactive.pm:1106 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "" #: diskdrake/interactive.pm:1115 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "" #: diskdrake/interactive.pm:1138 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" #: diskdrake/interactive.pm:1154 #, c-format msgid "Move files to the new partition" msgstr "" #: diskdrake/interactive.pm:1154 standalone/draksambashare:75 standalone/draksambashare:138 #, c-format msgid "Hide files" msgstr "" #: diskdrake/interactive.pm:1155 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" #: diskdrake/interactive.pm:1166 #, c-format msgid "Moving files to the new partition" msgstr "" #: diskdrake/interactive.pm:1170 #, c-format msgid "Copying %s" msgstr "" #: diskdrake/interactive.pm:1174 #, c-format msgid "Removing %s" msgstr "" #: diskdrake/interactive.pm:1188 #, c-format msgid "partition %s is now known as %s" msgstr "" #: diskdrake/interactive.pm:1189 #, c-format msgid "Partitions have been renumbered: " msgstr "" #: diskdrake/interactive.pm:1209 diskdrake/interactive.pm:1271 #, c-format msgid "Device: " msgstr "" #: diskdrake/interactive.pm:1210 #, c-format msgid "Devfs name: " msgstr "" #: diskdrake/interactive.pm:1211 #, c-format msgid "Volume label: " msgstr "" #: diskdrake/interactive.pm:1212 #, c-format msgid "" "DOS drive letter: %s (just a guess)\n" "" msgstr "" #: diskdrake/interactive.pm:1216 diskdrake/interactive.pm:1225 diskdrake/interactive.pm:1289 #, c-format msgid "Type: " msgstr "" #: diskdrake/interactive.pm:1220 install_steps_gtk.pm:300 #, c-format msgid "Name: " msgstr "" #: diskdrake/interactive.pm:1227 #, c-format msgid "" "Start: sector %s\n" "" msgstr "" #: diskdrake/interactive.pm:1228 #, c-format msgid "Size: %s" msgstr "" #: diskdrake/interactive.pm:1230 #, c-format msgid ", %s sectors" msgstr "" #: diskdrake/interactive.pm:1232 #, c-format msgid "" "Cylinder %d to %d\n" "" msgstr "" #: diskdrake/interactive.pm:1233 #, c-format msgid "" "Number of logical extents: %d\n" "" msgstr "" #: diskdrake/interactive.pm:1234 #, c-format msgid "" "Formatted\n" "" msgstr "" #: diskdrake/interactive.pm:1235 #, c-format msgid "" "Not formatted\n" "" msgstr "" #: diskdrake/interactive.pm:1236 #, c-format msgid "" "Mounted\n" "" msgstr "" #: diskdrake/interactive.pm:1237 #, c-format msgid "" "RAID %s\n" "" msgstr "" #: diskdrake/interactive.pm:1242 #, c-format msgid "" "Loopback file(s):\n" " %s\n" "" msgstr "" #: diskdrake/interactive.pm:1243 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" "" msgstr "" #: diskdrake/interactive.pm:1245 #, c-format msgid "" "Level %s\n" "" msgstr "" #: diskdrake/interactive.pm:1246 #, c-format msgid "" "Chunk size %d KiB\n" "" msgstr "" #: diskdrake/interactive.pm:1247 #, c-format msgid "" "RAID-disks %s\n" "" msgstr "" #: diskdrake/interactive.pm:1249 #, c-format msgid "Loopback file name: %s" msgstr "" #: diskdrake/interactive.pm:1252 #, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" "" msgstr "" #: diskdrake/interactive.pm:1255 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" "" msgstr "" #: diskdrake/interactive.pm:1272 #, c-format msgid "Read-only" msgstr "" #: diskdrake/interactive.pm:1273 #, c-format msgid "" "Size: %s\n" "" msgstr "" #: diskdrake/interactive.pm:1274 #, c-format msgid "" "Geometry: %s cylinders, %s heads, %s sectors\n" "" msgstr "" #: diskdrake/interactive.pm:1275 network/thirdparty.pm:316 #, c-format msgid "Info: " msgstr "" #: diskdrake/interactive.pm:1276 #, c-format msgid "" "LVM-disks %s\n" "" msgstr "" #: diskdrake/interactive.pm:1277 #, c-format msgid "" "Partition table type: %s\n" "" msgstr "" #: diskdrake/interactive.pm:1278 #, c-format msgid "" "on channel %d id %d\n" "" msgstr "" #: diskdrake/interactive.pm:1321 #, c-format msgid "Filesystem encryption key" msgstr "" #: diskdrake/interactive.pm:1322 #, c-format msgid "Choose your filesystem encryption key" msgstr "" #: diskdrake/interactive.pm:1325 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "" #: diskdrake/interactive.pm:1326 #, c-format msgid "The encryption keys do not match" msgstr "" #: diskdrake/interactive.pm:1329 network/netconnect.pm:1041 standalone/drakconnect:419 standalone/drakroam:112 #, c-format msgid "Encryption key" msgstr "" #: diskdrake/interactive.pm:1330 #, c-format msgid "Encryption key (again)" msgstr "" #: diskdrake/interactive.pm:1332 standalone/drakvpn:1017 standalone/drakvpn:1102 #, c-format msgid "Encryption algorithm" msgstr "" #: diskdrake/removable.pm:46 #, c-format msgid "Change type" msgstr "" #: diskdrake/smbnfs_gtk.pm:163 #, c-format msgid "Can not login using username %s (bad password?)" msgstr "" #: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176 #, c-format msgid "Domain Authentication Required" msgstr "" #: diskdrake/smbnfs_gtk.pm:168 #, c-format msgid "Which username" msgstr "" #: diskdrake/smbnfs_gtk.pm:168 #, c-format msgid "Another one" msgstr "" #: diskdrake/smbnfs_gtk.pm:177 #, c-format msgid "Please enter your username, password and domain name to access this host." msgstr "" #: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3503 #, c-format msgid "Username" msgstr "" #: diskdrake/smbnfs_gtk.pm:205 #, c-format msgid "Search servers" msgstr "" #: diskdrake/smbnfs_gtk.pm:210 #, c-format msgid "Search new servers" msgstr "" #: do_pkgs.pm:16 do_pkgs.pm:49 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "" #: do_pkgs.pm:19 do_pkgs.pm:39 do_pkgs.pm:52 printer/printerdrake.pm:4037 #, c-format msgid "Could not install the %s package!" msgstr "" #: do_pkgs.pm:24 do_pkgs.pm:57 #, c-format msgid "Mandatory package %s is missing" msgstr "" #: do_pkgs.pm:35 harddrake/sound.pm:271 install_steps_interactive.pm:1311 keyboard.pm:391 network/ndiswrapper.pm:95 network/netconnect.pm:460 printer/printerdrake.pm:1429 printer/printerdrake.pm:2461 printer/printerdrake.pm:2561 printer/printerdrake.pm:2607 printer/printerdrake.pm:2674 printer/printerdrake.pm:2709 printer/printerdrake.pm:3043 printer/printerdrake.pm:3050 printer/printerdrake.pm:4036 printer/printerdrake.pm:4365 printer/printerdrake.pm:4485 printer/printerdrake.pm:5644 standalone/drakTermServ:326 standalone/drakTermServ:1205 standalone/drakTermServ:1266 standalone/drakTermServ:1931 standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:133 standalone/drakclock:224 standalone/drakconnect:973 standalone/drakperm:380 standalone/drakperm:390 standalone/drakups:27 standalone/harddrake2:479 standalone/localedrake:43 standalone/scannerdrake:51 standalone/scannerdrake:940 #, c-format msgid "Warning" msgstr "" #: do_pkgs.pm:35 standalone/drakbackup:4109 standalone/harddrake2:479 #, c-format msgid "" "The following packages need to be installed:\n" "" msgstr "" #: do_pkgs.pm:202 #, c-format msgid "Installing packages..." msgstr "" #: do_pkgs.pm:247 #, c-format msgid "Removing packages..." msgstr "" #: fs/format.pm:58 fs/format.pm:65 #, c-format msgid "Formatting partition %s" msgstr "" #: fs/format.pm:62 #, c-format msgid "Creating and formatting file %s" msgstr "" #: fs/format.pm:115 #, c-format msgid "I do not know how to format %s in type %s" msgstr "" #: fs/format.pm:120 fs/format.pm:122 #, c-format msgid "%s formatting of %s failed" msgstr "" #: fs/loopback.pm:24 #, c-format msgid "" "Circular mounts %s\n" "" msgstr "" #: fs/mount.pm:74 #, c-format msgid "Mounting partition %s" msgstr "" #: fs/mount.pm:75 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "" #: fs/mount.pm:80 fs/mount.pm:97 #, c-format msgid "Checking %s" msgstr "" #: fs/mount.pm:113 partition_table.pm:385 #, c-format msgid "error unmounting %s: %s" msgstr "" #: fs/mount.pm:142 #, c-format msgid "Enabling swap partition %s" msgstr "" #: fs/mount_options.pm:111 #, c-format msgid "Use an encrypted file system" msgstr "" #: fs/mount_options.pm:113 #, c-format msgid "Enable group disk quota accounting and optionally enforce limits" msgstr "" #: fs/mount_options.pm:115 #, c-format msgid "" "Do not update inode access times on this file system\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" #: fs/mount_options.pm:118 #, c-format msgid "" "Can only be mounted explicitly (i.e.,\n" "the -a option will not cause the file system to be mounted)." msgstr "" #: fs/mount_options.pm:121 #, c-format msgid "Do not interpret character or block special devices on the file system." msgstr "" #: fs/mount_options.pm:123 #, c-format msgid "" "Do not allow execution of any binaries on the mounted\n" "file system. This option might be useful for a server that has file systems\n" "containing binaries for architectures other than its own." msgstr "" #: fs/mount_options.pm:127 #, c-format msgid "" "Do not allow set-user-identifier or set-group-identifier\n" "bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" "have suidperl(1) installed.)" msgstr "" #: fs/mount_options.pm:131 #, c-format msgid "Mount the file system read-only." msgstr "" #: fs/mount_options.pm:133 #, c-format msgid "All I/O to the file system should be done synchronously." msgstr "" #: fs/mount_options.pm:137 #, c-format msgid "" "Allow an ordinary user to mount the file system. The\n" "name of the mounting user is written to mtab so that he can unmount the file\n" "system again. This option implies the options noexec, nosuid, and nodev\n" "(unless overridden by subsequent options, as in the option line\n" "user,exec,dev,suid )." msgstr "" #: fs/mount_options.pm:143 #, c-format msgid "Enable user disk quota accounting, and optionally enforce limits" msgstr "" #: fs/mount_options.pm:145 #, c-format msgid "Give write access to ordinary users" msgstr "" #: fs/mount_options.pm:147 #, c-format msgid "Give read-only access to ordinary users" msgstr "" #: fs/type.pm:376 #, c-format msgid "You can not use JFS for partitions smaller than 16MB" msgstr "" #: fs/type.pm:377 #, c-format msgid "You can not use ReiserFS for partitions smaller than 32MB" msgstr "" #: fsedit.pm:27 #, c-format msgid "with /usr" msgstr "" #: fsedit.pm:32 #, c-format msgid "server" msgstr "" #: fsedit.pm:210 #, c-format msgid "" "I can not read the partition table of device %s, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to lose all the partitions?\n" "" msgstr "" #: fsedit.pm:378 #, c-format msgid "Mount points must begin with a leading /" msgstr "" #: fsedit.pm:379 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "" #: fsedit.pm:380 #, c-format msgid "" "There is already a partition with mount point %s\n" "" msgstr "" #: fsedit.pm:382 #, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" #: fsedit.pm:387 #, c-format msgid "You can not use a LVM Logical Volume for mount point %s since it spans physical volumes" msgstr "" #: fsedit.pm:389 #, c-format msgid "" "You've selected a LVM Logical Volume as root (/).\n" "The bootloader is not able to handle this when the volume spans physical volumes.\n" "You should create a /boot partition first" msgstr "" #: fsedit.pm:393 fsedit.pm:395 #, c-format msgid "This directory should remain within the root filesystem" msgstr "" #: fsedit.pm:397 fsedit.pm:399 #, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount point\n" "" msgstr "" #: fsedit.pm:401 #, c-format msgid "You can not use an encrypted file system for mount point %s" msgstr "" #: fsedit.pm:462 #, c-format msgid "Not enough free space for auto-allocating" msgstr "" #: fsedit.pm:464 #, c-format msgid "Nothing to do" msgstr "" #: harddrake/data.pm:62 install_any.pm:1705 #, c-format msgid "Floppy" msgstr "" #: harddrake/data.pm:72 #, c-format msgid "Zip" msgstr "" #: harddrake/data.pm:88 install_any.pm:1706 #, c-format msgid "Hard Disk" msgstr "" #: harddrake/data.pm:97 install_any.pm:1707 #, c-format msgid "CDROM" msgstr "" #: harddrake/data.pm:107 #, c-format msgid "CD/DVD burners" msgstr "" #: harddrake/data.pm:117 #, c-format msgid "DVD-ROM" msgstr "" #: harddrake/data.pm:127 standalone/drakbackup:2050 #, c-format msgid "Tape" msgstr "" #: harddrake/data.pm:136 #, c-format msgid "Videocard" msgstr "" #: harddrake/data.pm:146 #, c-format msgid "DVB card" msgstr "" #: harddrake/data.pm:154 #, c-format msgid "Tvcard" msgstr "" #: harddrake/data.pm:163 #, c-format msgid "Other MultiMedia devices" msgstr "" #: harddrake/data.pm:172 #, c-format msgid "Soundcard" msgstr "" #: harddrake/data.pm:185 #, c-format msgid "Webcam" msgstr "" #: harddrake/data.pm:199 #, c-format msgid "Processors" msgstr "" #: harddrake/data.pm:209 #, c-format msgid "ISDN adapters" msgstr "" #: harddrake/data.pm:220 #, c-format msgid "USB sound devices" msgstr "" #: harddrake/data.pm:229 #, c-format msgid "Radio cards" msgstr "" #: harddrake/data.pm:238 #, c-format msgid "ATM network cards" msgstr "" #: harddrake/data.pm:247 #, c-format msgid "WAN network cards" msgstr "" #: harddrake/data.pm:256 #, c-format msgid "Bluetooth devices" msgstr "" #: harddrake/data.pm:265 #, c-format msgid "Ethernetcard" msgstr "" #: harddrake/data.pm:282 network/netconnect.pm:481 #, c-format msgid "Modem" msgstr "" #: harddrake/data.pm:292 #, c-format msgid "ADSL adapters" msgstr "" #: harddrake/data.pm:306 #, c-format msgid "Memory" msgstr "" #: harddrake/data.pm:315 #, c-format msgid "AGP controllers" msgstr "" #: harddrake/data.pm:324 help.pm:186 help.pm:855 install_steps_interactive.pm:987 #, c-format msgid "Printer" msgstr "" #. -PO: these are joysticks controllers: #: harddrake/data.pm:338 #, c-format msgid "Game port controllers" msgstr "" #: harddrake/data.pm:347 #, c-format msgid "Joystick" msgstr "" #: harddrake/data.pm:357 #, c-format msgid "SATA controllers" msgstr "" #: harddrake/data.pm:366 #, c-format msgid "RAID controllers" msgstr "" #: harddrake/data.pm:375 #, c-format msgid "(E)IDE/ATA controllers" msgstr "" #: harddrake/data.pm:384 #, c-format msgid "Firewire controllers" msgstr "" #: harddrake/data.pm:393 #, c-format msgid "PCMCIA controllers" msgstr "" #: harddrake/data.pm:402 #, c-format msgid "SCSI controllers" msgstr "" #: harddrake/data.pm:411 #, c-format msgid "USB controllers" msgstr "" #: harddrake/data.pm:420 #, c-format msgid "USB ports" msgstr "" #: harddrake/data.pm:429 #, c-format msgid "SMBus controllers" msgstr "" #: harddrake/data.pm:438 #, c-format msgid "Bridges and system controllers" msgstr "" #: harddrake/data.pm:447 help.pm:855 install_steps_interactive.pm:119 install_steps_interactive.pm:947 standalone/keyboarddrake:29 #, c-format msgid "Keyboard" msgstr "" #: harddrake/data.pm:460 #, c-format msgid "Tablet and touchscreen" msgstr "" #: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:980 #, c-format msgid "Mouse" msgstr "" #: harddrake/data.pm:483 #, c-format msgid "UPS" msgstr "" #: harddrake/data.pm:492 #, c-format msgid "Scanner" msgstr "" #: harddrake/data.pm:502 standalone/harddrake2:442 #, c-format msgid "Unknown/Others" msgstr "" #: harddrake/data.pm:530 #, c-format msgid "cpu # " msgstr "" #: harddrake/sound.pm:192 standalone/drakconnect:162 standalone/drakconnect:637 #, c-format msgid "Please Wait... Applying the configuration" msgstr "" #: harddrake/sound.pm:228 #, c-format msgid "No alternative driver" msgstr "" #: harddrake/sound.pm:229 #, c-format msgid "There's no known OSS/ALSA alternative driver for your sound card (%s) which currently uses \"%s\"" msgstr "" #: harddrake/sound.pm:235 #, c-format msgid "Sound configuration" msgstr "" #: harddrake/sound.pm:237 #, c-format msgid "Here you can select an alternative driver (either OSS or ALSA) for your sound card (%s)." msgstr "" #. -PO: here the first %s is either "OSS" or "ALSA", #. -PO: the second %s is the name of the current driver #. -PO: and the third %s is the name of the default driver #: harddrake/sound.pm:242 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is \"%s\")" msgstr "" #: harddrake/sound.pm:244 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent sound API (it's available on most UNIX(tm) systems) but it's a very basic and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using the ALSA library.\n" "" msgstr "" #: harddrake/sound.pm:258 harddrake/sound.pm:343 standalone/drakups:146 #, c-format msgid "Driver:" msgstr "" #: harddrake/sound.pm:263 #, c-format msgid "Trouble shooting" msgstr "" #: harddrake/sound.pm:271 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver will only be used on next bootstrap." msgstr "" #: harddrake/sound.pm:279 #, c-format msgid "No open source driver" msgstr "" #: harddrake/sound.pm:280 #, c-format msgid "There's no free driver for your sound card (%s), but there's a proprietary driver at \"%s\"." msgstr "" #: harddrake/sound.pm:283 #, c-format msgid "No known driver" msgstr "" #: harddrake/sound.pm:284 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "" #: harddrake/sound.pm:288 #, c-format msgid "Unknown driver" msgstr "" #: harddrake/sound.pm:289 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "" #: harddrake/sound.pm:303 #, c-format msgid "Sound trouble shooting" msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:306 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" "" msgstr "" #: harddrake/sound.pm:332 #, c-format msgid "Let me pick any driver" msgstr "" #: harddrake/sound.pm:335 #, c-format msgid "Choosing an arbitrary driver" msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:338 #, c-format msgid "" "If you really think that you know which driver is the right one for your card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" #: harddrake/v4l.pm:12 standalone/net_applet:64 standalone/net_applet:65 standalone/net_applet:67 #, c-format msgid "Auto-detect" msgstr "" #: harddrake/v4l.pm:85 harddrake/v4l.pm:263 harddrake/v4l.pm:296 #, c-format msgid "Unknown|Generic" msgstr "" #: harddrake/v4l.pm:118 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "" #: harddrake/v4l.pm:119 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "" #: harddrake/v4l.pm:404 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types here. Just select your tv card parameters if needed." msgstr "" #: harddrake/v4l.pm:407 #, c-format msgid "Card model:" msgstr "" #: harddrake/v4l.pm:408 #, c-format msgid "Tuner type:" msgstr "" #: harddrake/v4l.pm:409 #, c-format msgid "Number of capture buffers:" msgstr "" #: harddrake/v4l.pm:409 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "" #: harddrake/v4l.pm:411 #, c-format msgid "PLL setting:" msgstr "" #: harddrake/v4l.pm:412 #, c-format msgid "Radio support:" msgstr "" #: harddrake/v4l.pm:412 #, c-format msgid "enable radio support" msgstr "" #: help.pm:11 #, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandriva Linux distribution. If you agree with all the\n" "terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n" "button will reboot your computer." msgstr "" #: help.pm:14 install_steps_gtk.pm:542 install_steps_interactive.pm:92 install_steps_interactive.pm:738 standalone/drakautoinst:214 #, c-format msgid "Accept" msgstr "" #: help.pm:17 #, c-format msgid "" "GNU/Linux is a multi-user system which means each user can have his or her\n" "own preferences, own files and so on. But unlike \"root\", who is the\n" "system administrator, the users you add at this point will not be authorized\n" "to change anything except their own files and their own configurations,\n" "protecting the system from unintentional or malicious changes which could\n" "impact on the system as a whole. You'll have to create at least one regular\n" "user for yourself -- this is the account which you should use for routine,\n" "day-to-day usage. Although it's very easy to log in as \"root\" to do\n" "anything and everything, it may also be very dangerous! A very simple\n" "mistake could mean that your system will not work any more. If you make a\n" "serious mistake as a regular user, the worst that can happen is that you'll\n" "lose some information, but you will not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you type in this field and copy it to the \"%s\" one, which is the name\n" "this user will enter to log onto the system. If you like, you may override\n" "the default and change the user name. The next step is to enter a password.\n" "From a security point of view, a non-privileged (regular) user password is\n" "not as crucial as the \"root\" password, but that's no reason to neglect it\n" "by making it blank or too simple: after all, your files could be the ones\n" "at risk.\n" "\n" "Once you click on \"%s\", you can add other users. Add a user for each one\n" "of your friends, your father, your sister, etc. Click \"%s\" when you're\n" "finished adding users.\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\" for\n" "that user (bash by default).\n" "\n" "When you're finished adding users, you'll be asked to choose a user who\n" "will be automatically logged into the system when the computer boots up. If\n" "you're interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click on\n" "\"%s\". If you're not interested in this feature, uncheck the \"%s\" box." msgstr "" #: help.pm:51 printer/printerdrake.pm:1887 printer/printerdrake.pm:2008 standalone/draksambashare:54 #, c-format msgid "User name" msgstr "" #: help.pm:51 help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:237 install_steps_gtk.pm:685 interactive.pm:436 interactive/newt.pm:321 network/thirdparty.pm:370 printer/printerdrake.pm:3973 standalone/drakTermServ:384 standalone/drakbackup:3954 standalone/drakbackup:4048 standalone/drakbackup:4065 standalone/drakbackup:4083 ugtk2.pm:490 #, c-format msgid "Next" msgstr "" #: help.pm:51 #, c-format msgid "Do you want to use this feature?" msgstr "" #: help.pm:54 #, c-format msgid "" "Listed here are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" #: help.pm:85 #, c-format msgid "" "The Mandriva Linux installation is distributed on several CD-ROMs. If a\n" "selected package is located on another CD-ROM, DrakX will eject the current\n" "CD and ask you to insert the required one. If you do not have the requested\n" "CD at hand, just click on \"%s\", the corresponding packages will not be\n" "installed." msgstr "" #: help.pm:92 #, c-format msgid "" "It's now time to specify which programs you wish to install on your system.\n" "There are thousands of packages available for Mandriva Linux, and to make it\n" "simpler to manage, they have been placed into groups of similar\n" "applications.\n" "\n" "Mandriva Linux sorts package groups in four categories. You can mix and\n" "match applications from the various categories, so a ``Workstation''\n" "installation can still have applications from the ``Server'' category\n" "installed.\n" "\n" " * \"%s\": if you plan to use your machine as a workstation, select one or\n" "more of the groups in the workstation category.\n" "\n" " * \"%s\": if you plan on using your machine for programming, select the\n" "appropriate groups from that category. The special \"LSB\" group will\n" "configure your system so that it complies as much as possible with the\n" "Linux Standard Base specifications.\n" "\n" " Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n" "instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n" "of the system. However, if you do not select the \"LSB\" group you will\n" "still have a system which is nearly 100%% LSB-compliant.\n" "\n" " * \"%s\": if your machine is intended to be a server, select which of the\n" "more common services you wish to install on your machine.\n" "\n" " * \"%s\": this is where you will choose your preferred graphical\n" "environment. At least one must be selected if you want to have a graphical\n" "interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group.\n" "\n" "You can check the \"%s\" box, which is useful if you're familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" "\n" "If you start the installation in \"%s\" mode, you can deselect all groups\n" "and prevent the installation of any new packages. This is useful for\n" "repairing or updating an existing system.\n" "\n" "If you deselect all groups when performing a regular installation (as\n" "opposed to an upgrade), a dialog will pop up suggesting different options\n" "for a minimal installation:\n" "\n" " * \"%s\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"%s\": installs the base system plus basic utilities and their\n" "documentation. This installation is suitable for setting up a server.\n" "\n" " * \"%s\": will install the absolute minimum number of packages necessary\n" "to get a working Linux system. With this installation you will only have a\n" "command-line interface. The total size of this installation is about 65\n" "megabytes." msgstr "" #: help.pm:146 share/compssUsers.pl:24 #, c-format msgid "Workstation" msgstr "" #: help.pm:146 share/compssUsers.pl:65 share/compssUsers.pl:167 share/compssUsers.pl:169 #, c-format msgid "Development" msgstr "" #: help.pm:146 share/compssUsers.pl:145 #, c-format msgid "Graphical Environment" msgstr "" #: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:646 #, c-format msgid "Individual package selection" msgstr "" #: help.pm:146 help.pm:588 #, c-format msgid "Upgrade" msgstr "" #: help.pm:146 install_steps_interactive.pm:604 #, c-format msgid "With X" msgstr "" #: help.pm:146 #, c-format msgid "With basic documentation" msgstr "" #: help.pm:146 #, c-format msgid "Truly minimal install" msgstr "" #: help.pm:149 #, c-format msgid "" "If you choose to install packages individually, the installer will present\n" "a tree containing all packages classified by groups and subgroups. While\n" "browsing the tree, you can select entire groups, subgroups, or individual\n" "packages.\n" "\n" "Whenever you select a package on the tree, a description will appear on the\n" "right to let you know the purpose of that package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you'll be asked to confirm that you really want those servers to be\n" "installed. By default Mandriva Linux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that\n" "security holes were discovered after this version of Mandriva Linux was\n" "finalized. If you do not know what a particular service is supposed to do or\n" "why it's being installed, then click \"%s\". Clicking \"%s\" will install\n" "the listed services and they will be started automatically at boot time. !!\n" "\n" "The \"%s\" option is used to disable the warning dialog which appears\n" "whenever the installer automatically selects a package to resolve a\n" "dependency issue. Some packages depend on others and the installation of\n" "one particular package may require the installation of another package. The\n" "installer can determine which packages are required to satisfy a dependency\n" "to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert the floppy disk created at the end of\n" "another installation. See the second tip of the last step on how to create\n" "such a floppy." msgstr "" #: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:939 interactive.pm:161 modules/interactive.pm:71 standalone/drakbackup:2517 standalone/draksec:54 standalone/harddrake2:309 ugtk2.pm:898 wizards.pm:156 #, c-format msgid "No" msgstr "" #: help.pm:180 help.pm:285 help.pm:444 help.pm:444 install_any.pm:939 interactive.pm:161 modules/interactive.pm:71 printer/printerdrake.pm:883 printer/printerdrake.pm:898 standalone/drakbackup:2517 standalone/draksec:55 standalone/harddrake2:308 ugtk2.pm:898 wizards.pm:156 #, c-format msgid "Yes" msgstr "" #: help.pm:180 #, c-format msgid "Automatic dependencies" msgstr "" #: help.pm:183 #, c-format msgid "" "\"%s\": clicking on the \"%s\" button will open the printer configuration\n" "wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" "information on how to set up a new printer. The interface presented in our\n" "manual is similar to the one used during installation." msgstr "" #: help.pm:186 help.pm:566 help.pm:855 help.pm:855 help.pm:855 help.pm:855 help.pm:855 help.pm:855 help.pm:855 install_steps_gtk.pm:598 standalone/drakbackup:2341 standalone/drakbackup:2345 standalone/drakbackup:2349 standalone/drakbackup:2353 standalone/drakroam:165 #, c-format msgid "Configure" msgstr "" #: help.pm:189 #, c-format msgid "" "This dialog is used to select which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all services available on the current installation. Review\n" "each one of them carefully and uncheck those which are not needed at boot\n" "time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you're not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you probably do not want to start any services which you do not need.\n" "Please remember that some services can be dangerous if they're enabled on a\n" "server. In general, select only those services you really need. !!" msgstr "" #: help.pm:206 #, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"%s\", which will let GNU/Linux know that the system clock and the\n" "hardware clock are in the same time zone. This is useful when the machine\n" "also hosts another operating system.\n" "\n" "The \"%s\" option will automatically regulate the system clock by\n" "connecting to a remote time server on the Internet. For this feature to\n" "work, you must have a working Internet connection. We recommend that you\n" "choose a time server located near you. This option actually installs a time\n" "server which can be used by other machines on your local network as well." msgstr "" #: help.pm:217 install_steps_interactive.pm:882 #, c-format msgid "Hardware clock set to GMT" msgstr "" #: help.pm:217 #, c-format msgid "Automatic time synchronization" msgstr "" #: help.pm:220 #, c-format msgid "" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs." msgstr "" #: help.pm:231 #, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n" "\n" "You'll see a list of different parameters to change to get an optimal\n" "graphical display.\n" "\n" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer.\n" "\n" "\n" "\n" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture.\n" "\n" "\n" "\n" "Test\n" "\n" " Depending on your hardware, this entry might not appear.\n" "\n" " The system will try to open a graphical screen at the desired\n" "resolution. If you see the test message during the test and answer \"%s\",\n" "then DrakX will proceed to the next step. If you do not see it, then it\n" "means that some part of the auto-detected configuration was incorrect and\n" "the test will automatically end after 12 seconds and return you to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" #: help.pm:288 #, c-format msgid "" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer." msgstr "" #: help.pm:295 #, c-format msgid "" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture." msgstr "" #: help.pm:303 #, c-format msgid "" "In the situation where different servers are available for your card, with\n" "or without 3D acceleration, you're asked to choose the server which best\n" "suits your needs." msgstr "" #: help.pm:308 #, c-format msgid "" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" #: help.pm:316 #, c-format msgid "" "You now need to decide where you want to install the Mandriva Linux\n" "operating system on your hard drive. If your hard drive is empty or if an\n" "existing operating system is using all the available space you will have to\n" "partition the drive. Basically, partitioning a hard drive means to\n" "logically divide it to create the space needed to install your new\n" "Mandriva Linux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to data losses, partitioning can be intimidating and stressful\n" "for the inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on the configuration of your hard drive, several options are\n" "available:\n" "\n" " * \"%s\". This option will perform an automatic partitioning of your blank\n" "drive(s). If you use this option there will be no further prompts.\n" "\n" " * \"%s\". The wizard has detected one or more existing Linux partitions on\n" "your hard drive. If you want to use them, choose this option. You will then\n" "be asked to choose the mount points associated with each of the partitions.\n" "The legacy mount points are selected by default, and for the most part it's\n" "a good idea to keep them.\n" "\n" " * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n" "all the space available on it, you will have to create free space for\n" "GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n" "data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n" "FAT or NTFS partition. Resizing can be performed without the loss of any\n" "data, provided you've previously defragmented the Windows partition.\n" "Backing up your data is strongly recommended. Using this option is\n" "recommended if you want to use both Mandriva Linux and Microsoft Windows on\n" "the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "than when you started. You'll have less free space under Microsoft Windows\n" "to store your data or to install new software.\n" "\n" " * \"%s\". If you want to delete all data and all partitions present on\n" "your hard drive and replace them with your new Mandriva Linux system, choose\n" "this option. Be careful, because you will not be able to undo this operation\n" "after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"%s\". This option appears when the hard drive is entirely taken by\n" "Microsoft Windows. Choosing this option will simply erase everything on the\n" "drive and begin fresh, partitioning everything from scratch.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"%s\". Choose this option if you want to manually partition your hard\n" "drive. Be careful -- it is a powerful but dangerous choice and you can very\n" "easily lose all your data. That's why this option is really only\n" "recommended if you have done something like this before and have some\n" "experience. For more instructions on how to use the DiskDrake utility,\n" "refer to the ``Managing Your Partitions'' section in the ``Starter Guide''." msgstr "" #: help.pm:374 install_interactive.pm:95 #, c-format msgid "Use free space" msgstr "" #: help.pm:374 #, c-format msgid "Use existing partition" msgstr "" #: help.pm:374 install_interactive.pm:137 #, c-format msgid "Use the free space on the Windows partition" msgstr "" #: help.pm:374 install_interactive.pm:213 #, c-format msgid "Erase entire disk" msgstr "" #: help.pm:374 #, c-format msgid "Remove Windows" msgstr "" #: help.pm:374 install_interactive.pm:228 #, c-format msgid "Custom disk partitioning" msgstr "" #: help.pm:377 #, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n" "to remove the installation media (CD-ROM or floppy). The first thing you\n" "should see after your computer has finished doing its hardware tests is the\n" "boot-loader menu, giving you the choice of which operating system to start.\n" "\n" "The \"%s\" button shows two more buttons to:\n" "\n" " * \"%s\": enables you to create an installation floppy disk which will\n" "automatically perform a whole installation without the help of an operator,\n" "similar to the installation you've just configured.\n" "\n" " Note that two different options are available after clicking on that\n" "button:\n" "\n" " * \"%s\". This is a partially automated installation. The partitioning\n" "step is the only interactive procedure.\n" "\n" " * \"%s\". Fully automated installation: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing on a number of similar\n" "machines. See the Auto install section on our web site for more\n" "information.\n" "\n" " * \"%s\"(*): saves a list of the packages selected in this installation.\n" "To use this selection with another installation, insert the floppy and\n" "start the installation. At the prompt, press the [F1] key, type >>linux\n" "defcfg=\"floppy\"<< and press the [Enter] key.\n" "\n" "(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n" "\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n" "/dev/fd0\"." msgstr "" #: help.pm:409 #, c-format msgid "Generate auto-install floppy" msgstr "" #: help.pm:409 install_steps_interactive.pm:1337 #, c-format msgid "Replay" msgstr "" #: help.pm:409 install_steps_interactive.pm:1337 #, c-format msgid "Automated" msgstr "" #: help.pm:409 install_steps_interactive.pm:1340 #, c-format msgid "Save packages selection" msgstr "" #: help.pm:412 #, c-format msgid "" "If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n" "reformat some of them and erase any data they contain. To do so, please\n" "select those partitions as well.\n" "\n" "Please note that it's not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to reformat\n" "partitions containing data that you wish to keep (typically \"/home\").\n" "\n" "Please be careful when selecting partitions. After the formatting is\n" "completed, all data on the selected partitions will be deleted and you\n" "will not be able to recover it.\n" "\n" "Click on \"%s\" when you're ready to format the partitions.\n" "\n" "Click on \"%s\" if you want to choose another partition for your new\n" "Mandriva Linux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions which will be checked for\n" "bad blocks on the disk." msgstr "" #: help.pm:431 install_steps_gtk.pm:392 interactive.pm:437 interactive/newt.pm:318 printer/printerdrake.pm:3971 standalone/drakTermServ:363 standalone/drakbackup:3914 standalone/drakbackup:3953 standalone/drakbackup:4064 standalone/drakbackup:4079 ugtk2.pm:488 #, c-format msgid "Previous" msgstr "" #: help.pm:434 #, c-format msgid "" "By the time you install Mandriva Linux, it's likely that some packages will\n" "have been updated since the initial release. Bugs may have been fixed,\n" "security issues resolved. To allow you to benefit from these updates,\n" "you're now able to download them from the Internet. Check \"%s\" if you\n" "have a working Internet connection, or \"%s\" if you prefer to install\n" "updated packages later.\n" "\n" "Choosing \"%s\" will display a list of web locations from which updates can\n" "be retrieved. You should choose one near to you. A package-selection tree\n" "will appear: review the selection, and press \"%s\" to retrieve and install\n" "the selected package(s), or \"%s\" to abort." msgstr "" #: help.pm:444 help.pm:588 install_steps_gtk.pm:391 install_steps_interactive.pm:157 standalone/drakbackup:4111 #, c-format msgid "Install" msgstr "" #: help.pm:447 #, c-format msgid "" "At this point, DrakX will allow you to choose the security level you desire\n" "for your machine. As a rule of thumb, the security level should be set\n" "higher if the machine is to contain crucial data, or if it's to be directly\n" "exposed to the Internet. The trade-off that a higher security level is\n" "generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, keep the default option. You'll be able\n" "to change it later with the draksec tool, which is part of Mandriva Linux\n" "Control Center.\n" "\n" "Fill the \"%s\" field with the e-mail address of the person responsible for\n" "security. Security messages will be sent to that address." msgstr "" #: help.pm:458 #, c-format msgid "Security Administrator" msgstr "" #: help.pm:461 #, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandriva Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or by another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"%s\": this option deletes all partitions on the selected hard drive\n" "\n" " * \"%s\": this option enables you to automatically create ext3 and swap\n" "partitions in the free space of your hard drive\n" "\n" "\"%s\": gives access to additional features:\n" "\n" " * \"%s\": saves the partition table to a floppy. Useful for later\n" "partition-table recovery if necessary. It is strongly recommended that you\n" "perform this step.\n" "\n" " * \"%s\": allows you to restore a previously saved partition table from a\n" "floppy disk.\n" "\n" " * \"%s\": if your partition table is damaged, you can try to recover it\n" "using this option. Please be careful and remember that it does not always\n" "work.\n" "\n" " * \"%s\": discards all changes and reloads the partition table that was\n" "originally on the hard drive.\n" "\n" " * \"%s\": un-checking this option will force users to manually mount and\n" "unmount removable media such as floppies and CD-ROMs.\n" "\n" " * \"%s\": use this option if you wish to use a wizard to partition your\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": use this option to cancel your changes.\n" "\n" " * \"%s\": allows additional actions on partitions (type, options, format)\n" "and gives more information about the hard drive.\n" "\n" " * \"%s\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" #: help.pm:530 #, c-format msgid "Removable media auto-mounting" msgstr "" #: help.pm:530 #, c-format msgid "Toggle between normal/expert mode" msgstr "" #: help.pm:533 #, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one which you want to resize in order to install your new\n" "Mandriva Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" #: help.pm:564 #, c-format msgid "" "\"%s\": check the current country selection. If you're not in this country,\n" "click on the \"%s\" button and choose another. If your country is not in the\n" "list shown, click on the \"%s\" button to get the complete country list." msgstr "" #: help.pm:569 #, c-format msgid "" "This step is activated only if an existing GNU/Linux partition has been\n" "found on your machine.\n" "\n" "DrakX now needs to know if you want to perform a new installation or an\n" "upgrade of an existing Mandriva Linux system:\n" "\n" " * \"%s\". For the most part, this completely wipes out the old system.\n" "However, depending on your partitioning scheme, you can prevent some of\n" "your existing data (notably \"home\" directories) from being over-written.\n" "If you wish to change how your hard drives are partitioned, or to change\n" "the file system, you should use this option.\n" "\n" " * \"%s\". This installation class allows you to update the packages\n" "currently installed on your Mandriva Linux system. Your current partitioning\n" "scheme and user data will not be altered. Most of the other configuration\n" "steps remain available and are similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n" "running version \"8.1\" or later. Performing an upgrade on versions prior\n" "to Mandriva Linux version \"8.1\" is not recommended." msgstr "" #: help.pm:591 #, c-format msgid "" "Depending on the language you chose (), DrakX will automatically select a\n" "particular type of keyboard configuration. Check that the selection suits\n" "you or choose another keyboard layout.\n" "\n" "Also, you may not have a keyboard which corresponds exactly to your\n" "language: for example, if you are an English-speaking Swiss native, you may\n" "have a Swiss keyboard. Or if you speak English and are located in Quebec,\n" "you may find yourself in the same situation where your native language and\n" "country-set keyboard do not match. In either case, this installation step\n" "will allow you to select an appropriate keyboard from a list.\n" "\n" "Click on the \"%s\" button to be shown a list of supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding which will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" #: help.pm:609 #, c-format msgid "" "The first step is to choose your preferred language.\n" "\n" "Your choice of preferred language will affect the installer, the\n" "documentation, and the system in general. First select the region you're\n" "located in, then the language you speak.\n" "\n" "Clicking on the \"%s\" button will allow you to select other languages to\n" "be installed on your workstation, thereby installing the language-specific\n" "files for system documentation and applications. For example, if Spanish\n" "users are to use your machine, select English as the default language in\n" "the tree view and \"%s\" in the Advanced section.\n" "\n" "About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n" "cover all existing languages. However full support for it in GNU/Linux is\n" "still under development. For that reason, Mandriva Linux's use of UTF-8 will\n" "depend on the user's choices:\n" "\n" " * If you choose a language with a strong legacy encoding (latin1\n" "languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n" "iso-8859-2 languages), the legacy encoding will be used by default;\n" "\n" " * Other languages will use unicode by default;\n" "\n" " * If two or more languages are required, and those languages are not using\n" "the same encoding, then unicode will be used for the whole system;\n" "\n" " * Finally, unicode can also be forced for use throughout the system at a\n" "user's request by selecting the \"%s\" option independently of which\n" "languages were been chosen.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several, or even install them all by selecting the \"%s\" box.\n" "Selecting support for a language means translations, fonts, spell checkers,\n" "etc. will also be installed for that language.\n" "\n" "To switch between the various languages installed on your system, you can\n" "launch the \"localedrake\" command as \"root\" to change the language used\n" "by the entire system. Running the command as a regular user will only\n" "change the language settings for that particular user." msgstr "" #: help.pm:647 #, c-format msgid "Espanol" msgstr "" #: help.pm:650 #, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be obtained by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n" "mouse. DrakX will then configure your mouse so that you can simulate the\n" "wheel with it: to do so, press the middle button and move your mouse\n" "pointer up and down.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the list provided.\n" "\n" "You can select the \"%s\" entry to chose a ``generic'' mouse type which\n" "will work with nearly all mice.\n" "\n" "If you choose a mouse other than the default one, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and\n" "you will be returned to the mouse list.\n" "\n" "Occasionally wheel mice are not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"%s\" button, a mouse image will be displayed on-screen.\n" "Scroll the mouse wheel to ensure that it is activating correctly. As you\n" "scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n" "Test the buttons and check that the mouse pointer moves on-screen as you\n" "move your mouse about." msgstr "" #: help.pm:681 #, c-format msgid "with Wheel emulation" msgstr "" #: help.pm:681 #, c-format msgid "Universal | Any PS/2 & USB mice" msgstr "" #: help.pm:684 #, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" #: help.pm:688 #, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you must enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only user authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That's why you must choose a password which is difficult to\n" "guess: DrakX will tell you if the password you chose is too simple. As you\n" "can see, you're not forced to enter a password, but we strongly advise\n" "against this. GNU/Linux is just as prone to operator error as any other\n" "operating system. Since \"root\" can overcome all limitations and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves, it is important that it be difficult to become\n" "\"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it far\n" "too easy to compromise your system.\n" "\n" "One caveat: do not make the password too long or too complicated because you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it. To reduce the\n" "chance of a blind typing error you'll need to enter the password twice. If\n" "you do happen to make the same typing error twice, you'll have to use this\n" "``incorrect'' password the first time you'll try to connect as \"root\".\n" "\n" "If you want an authentication server to control access to your computer,\n" "click on the \"%s\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one for \"%s\". If you do not know which\n" "one to use, you should ask your network administrator.\n" "\n" "If you happen to have problems with remembering passwords, or if your\n" "computer will never be connected to the Internet and you absolutely trust\n" "everybody who uses your computer, you can choose to have \"%s\"." msgstr "" #: help.pm:722 #, c-format msgid "authentication" msgstr "" #: help.pm:725 #, c-format msgid "" "A boot loader is a little program which is started by the computer at boot\n" "time. It's responsible for starting up the whole system. Normally, the boot\n" "loader installation is totally automated. DrakX will analyze the disk boot\n" "sector and act according to what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n" "boot sector. This way you'll be able to load either GNU/Linux or any other\n" "OS installed on your machine.\n" "\n" " * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n" "\n" "If DrakX can not determine where to place the boot sector, it'll ask you\n" "where it should place it. Generally, the \"%s\" is the safest place.\n" "Choosing \"%s\" will not install any boot loader. Use this option only if you\n" "know what you're doing." msgstr "" #: help.pm:742 #, c-format msgid "" "Now, it's time to select a printing system for your computer. Other\n" "operating systems may offer you one, but Mandriva Linux offers two. Each of\n" "the printing systems is best suited to particular types of configuration.\n" "\n" " * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"%s\"\n" "will handle only very simple network cases and is somewhat slow when used\n" "within networks.) It's recommended that you use \"pdq\" if this is your\n" "first experience with GNU/Linux.\n" "\n" " * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n" "choice for printing to your local printer or to one halfway around the\n" "planet. It's simple to configure and can act as a server or a client for\n" "the ancient \"lpd\" printing system, so it's compatible with older\n" "operating systems which may still need print services. While quite\n" "powerful, the basic setup is almost as easy as \"pdq\". If you need to\n" "emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n" "\"%s\" includes graphical front-ends for printing or choosing printer\n" "options and for managing the printer.\n" "\n" "If you make a choice now, and later find that you do not like your printing\n" "system you may change it by running PrinterDrake from the Mandriva Linux\n" "Control Center and clicking on the \"%s\" button." msgstr "" #: help.pm:765 help.pm:765 #, c-format msgid "pdq" msgstr "" #: help.pm:765 help.pm:765 printer/cups.pm:117 printer/data.pm:129 #, c-format msgid "CUPS" msgstr "" #: help.pm:765 #, c-format msgid "Expert" msgstr "" #: help.pm:768 #, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, you'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" #: help.pm:786 #, c-format msgid "" "\"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card is not the one actually present on your\n" "system, you can click on the button and choose a different driver." msgstr "" #: help.pm:788 help.pm:855 install_steps_interactive.pm:1014 install_steps_interactive.pm:1031 #, c-format msgid "Sound card" msgstr "" #: help.pm:791 #, c-format msgid "" "As a review, DrakX will present a summary of information it has gathered\n" "about your system. Depending on the hardware installed on your machine, you\n" "may have some or all of the following entries. Each entry is made up of the\n" "hardware item to be configured, followed by a quick summary of the current\n" "configuration. Click on the corresponding \"%s\" button to make the change.\n" "\n" " * \"%s\": check the current keyboard map configuration and change it if\n" "necessary.\n" "\n" " * \"%s\": check the current country selection. If you're not in this\n" "country, click on the \"%s\" button and choose another. If your country\n" "is not in the list shown, click on the \"%s\" button to get the complete\n" "country list.\n" "\n" " * \"%s\": by default, DrakX deduces your time zone based on the country\n" "you have chosen. You can click on the \"%s\" button here if this is not\n" "correct.\n" "\n" " * \"%s\": verify the current mouse configuration and click on the button\n" "to change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to set up a new printer. The interface\n" "presented in our manual is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card is not the one actually present on your\n" "system, you can click on the button and choose a different driver.\n" "\n" " * \"%s\": if you have a TV card, this is where information about its\n" "configuration will be displayed. If you have a TV card and it is not\n" "detected, click on \"%s\" to try to configure it manually.\n" "\n" " * \"%s\": you can click on \"%s\" to change the parameters associated with\n" "the card if you feel the configuration is wrong.\n" "\n" " * \"%s\": by default, DrakX configures your graphical interface in\n" "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" "\"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": if you wish to configure your Internet or local network access,\n" "you can do so now. Refer to the printed documentation or use the\n" "Mandriva Linux Control Center after the installation has finished to benefit\n" "from full in-line help.\n" "\n" " * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n" "you're installing on is to be located behind a proxy server.\n" "\n" " * \"%s\": this entry allows you to redefine the security level as set in a\n" "previous step ().\n" "\n" " * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" "idea to protect yourself from intrusions by setting up a firewall. Consult\n" "the corresponding section of the ``Starter Guide'' for details about\n" "firewall settings.\n" "\n" " * \"%s\": if you wish to change your bootloader configuration, click this\n" "button. This should be reserved to advanced users. Refer to the printed\n" "documentation or the in-line help about bootloader configuration in the\n" "Mandriva Linux Control Center.\n" "\n" " * \"%s\": through this entry you can fine tune which services will be run\n" "on your machine. If you plan to use this machine as a server it's a good\n" "idea to review this setup." msgstr "" #: help.pm:855 install_steps_interactive.pm:878 install_steps_interactive.pm:973 standalone/drakclock:100 #, c-format msgid "Timezone" msgstr "" #: help.pm:855 install_steps_interactive.pm:1047 #, c-format msgid "TV card" msgstr "" #: help.pm:855 #, c-format msgid "ISDN card" msgstr "" #: help.pm:855 #, c-format msgid "Graphical Interface" msgstr "" #: help.pm:855 install_any.pm:1728 install_steps_interactive.pm:1065 standalone/drakbackup:2035 #, c-format msgid "Network" msgstr "" #: help.pm:855 install_steps_interactive.pm:1077 #, c-format msgid "Proxies" msgstr "" #: help.pm:855 install_steps_interactive.pm:1088 #, c-format msgid "Security Level" msgstr "" #: help.pm:855 install_steps_interactive.pm:1102 network/drakfirewall.pm:189 #, c-format msgid "Firewall" msgstr "" #: help.pm:855 install_steps_interactive.pm:1118 #, c-format msgid "Bootloader" msgstr "" #: help.pm:855 install_steps_interactive.pm:1131 services.pm:114 services.pm:157 services.pm:193 #, c-format msgid "Services" msgstr "" #: help.pm:858 #, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandriva Linux partition. Be careful, all data on this drive will be lost\n" "and will not be recoverable!" msgstr "" #: help.pm:863 #, c-format msgid "" "Click on \"%s\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"%s\" to quit this operation without losing data and partitions\n" "present on this hard drive." msgstr "" #: help.pm:869 help.pm:869 #, c-format msgid "Next ->" msgstr "" #: help.pm:869 #, c-format msgid "<- Previous" msgstr "" #: install2.pm:115 #, c-format msgid "Can not access kernel modules corresponding to your kernel (file %s is missing), this generally means your boot floppy in not in sync with the Installation medium (please create a newer boot floppy)" msgstr "" #: install2.pm:168 #, c-format msgid "You must also format %s" msgstr "" #: install_any.pm:401 #, c-format msgid "Do you have further supplementary media?" msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:404 #, c-format msgid "" "The following media have been found and will be used during install: %s.\n" "\n" "\n" "Do you have a supplementary installation media to configure?" msgstr "" #: install_any.pm:417 printer/printerdrake.pm:3301 printer/printerdrake.pm:3308 standalone/scannerdrake:182 standalone/scannerdrake:190 standalone/scannerdrake:241 standalone/scannerdrake:248 #, c-format msgid "CD-ROM" msgstr "" #: install_any.pm:417 #, c-format msgid "Network (HTTP)" msgstr "" #: install_any.pm:417 #, c-format msgid "Network (FTP)" msgstr "" #: install_any.pm:417 #, c-format msgid "Network (NFS)" msgstr "" #: install_any.pm:447 #, c-format msgid "Insert the CD 1 again" msgstr "" #: install_any.pm:473 network/netconnect.pm:834 standalone/drakbackup:112 #, c-format msgid "No device found" msgstr "" #: install_any.pm:478 #, c-format msgid "Insert the CD" msgstr "" #: install_any.pm:483 #, c-format msgid "Unable to mount CD-ROM" msgstr "" #: install_any.pm:516 install_any.pm:537 #, c-format msgid "URL of the mirror?" msgstr "" #: install_any.pm:521 #, c-format msgid "NFS setup" msgstr "" #: install_any.pm:521 #, c-format msgid "Please enter the hostname and directory of your NFS media" msgstr "" #: install_any.pm:522 #, c-format msgid "Hostname of the NFS mount ?" msgstr "" #: install_any.pm:522 standalone/draknfs:288 #, c-format msgid "Directory" msgstr "" #: install_any.pm:575 #, c-format msgid "Can't find a package list file on this mirror. Make sure the location is correct." msgstr "" #: install_any.pm:652 #, c-format msgid "Removing packages prior to upgrade..." msgstr "" #: install_any.pm:694 #, c-format msgid "Looking at packages already installed..." msgstr "" #: install_any.pm:698 #, c-format msgid "Finding packages to upgrade..." msgstr "" #: install_any.pm:776 #, c-format msgid "" "Change your Cd-Rom!\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done." msgstr "" #: install_any.pm:788 #, c-format msgid "Copying in progress" msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:930 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They do not have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" "" msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:953 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" "" msgstr "" #: install_any.pm:1389 partition_table.pm:597 #, c-format msgid "Error reading file %s" msgstr "" #: install_any.pm:1623 #, c-format msgid "The following disk(s) were renamed:" msgstr "" #: install_any.pm:1625 #, c-format msgid "%s (previously named as %s)" msgstr "" #: install_any.pm:1665 #, c-format msgid "An error occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem" msgstr "" #: install_any.pm:1709 #, c-format msgid "HTTP" msgstr "" #: install_any.pm:1709 #, c-format msgid "FTP" msgstr "" #: install_any.pm:1709 #, c-format msgid "NFS" msgstr "" #: install_any.pm:1732 #, c-format msgid "Please choose a media" msgstr "" #: install_any.pm:1748 #, c-format msgid "File already exists. Overwrite it?" msgstr "" #: install_any.pm:1752 #, c-format msgid "Permission denied" msgstr "" #: install_any.pm:1801 #, c-format msgid "Bad NFS name" msgstr "" #: install_any.pm:1822 #, c-format msgid "Bad media %s" msgstr "" #: install_any.pm:1872 #, c-format msgid "Can not make screenshots before partitioning" msgstr "" #: install_any.pm:1879 #, c-format msgid "Screenshots will be available after install in %s" msgstr "" #: install_gtk.pm:136 #, c-format msgid "System installation" msgstr "" #: install_gtk.pm:139 #, c-format msgid "System configuration" msgstr "" #: install_interactive.pm:22 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" #: install_interactive.pm:62 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" #: install_interactive.pm:67 #, c-format msgid "" "You do not have a swap partition.\n" "\n" "Continue anyway?" msgstr "" #: install_interactive.pm:70 install_steps.pm:218 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "" #: install_interactive.pm:97 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "" #: install_interactive.pm:105 #, c-format msgid "Use existing partitions" msgstr "" #: install_interactive.pm:107 #, c-format msgid "There is no existing partition to use" msgstr "" #: install_interactive.pm:114 #, c-format msgid "Use the Windows partition for loopback" msgstr "" #: install_interactive.pm:117 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "" #: install_interactive.pm:119 #, c-format msgid "Choose the sizes" msgstr "" #: install_interactive.pm:120 #, c-format msgid "Root partition size in MB: " msgstr "" #: install_interactive.pm:121 #, c-format msgid "Swap partition size in MB: " msgstr "" #: install_interactive.pm:130 #, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "" #: install_interactive.pm:139 #, c-format msgid "Which partition do you want to resize?" msgstr "" #: install_interactive.pm:153 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occurred: %s" msgstr "" #: install_interactive.pm:156 #, c-format msgid "Computing the size of the Windows partition" msgstr "" #: install_interactive.pm:163 #, c-format msgid "Your Windows partition is too fragmented. Please reboot your computer under Windows, run the ``defrag'' utility, then restart the Mandriva Linux installation." msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_interactive.pm:166 #, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this\n" "operation is dangerous. If you have not already done so, you\n" "first need to exit the installation, run \"chkdsk c:\" from a\n" "Command Prompt under Windows (beware, running graphical program\n" "\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" "Command Prompt!), optionally run defrag, then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" #: install_interactive.pm:178 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "" #: install_interactive.pm:179 #, c-format msgid "partition %s" msgstr "" #: install_interactive.pm:188 #, c-format msgid "Resizing Windows partition" msgstr "" #: install_interactive.pm:193 #, c-format msgid "FAT resizing failed: %s" msgstr "" #: install_interactive.pm:208 #, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "" #: install_interactive.pm:213 #, c-format msgid "Remove Windows(TM)" msgstr "" #: install_interactive.pm:215 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "" #: install_interactive.pm:219 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "" #: install_interactive.pm:232 #, c-format msgid "Use fdisk" msgstr "" #: install_interactive.pm:235 #, c-format msgid "" "You can now partition %s.\n" "When you are done, do not forget to save using `w'" msgstr "" #: install_interactive.pm:271 #, c-format msgid "I can not find any room for installing" msgstr "" #: install_interactive.pm:275 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "" #: install_interactive.pm:281 #, c-format msgid "Partitioning failed: %s" msgstr "" #: install_interactive.pm:288 #, c-format msgid "Bringing up the network" msgstr "" #: install_interactive.pm:293 #, c-format msgid "Bringing down the network" msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:10 #, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandriva Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related to the operating \n" "system and the different components of the Mandriva Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement between you and \n" "Mandriva S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you explicitly \n" "accept and fully agree to conform to the terms and conditions of this License. \n" "If you disagree with any portion of the License, you are not allowed to install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner which does not comply \n" "with the terms and conditions of this License is void and will terminate your rights under this \n" "License. Upon termination of the License, you must immediately destroy all copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", with no warranty, to the \n" "extent permitted by law.\n" "Mandriva S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or inability to use the Software \n" "Products, even if Mandriva S.A. has been advised of the possibility or occurrence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES\n" "\n" "To the extent permitted by law, Mandriva S.A. or its distributors will, in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever (including without \n" "limitation damages for loss of business, interruption of business, financial loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential loss) arising out \n" "of the possession and use of software components or arising out of downloading software components \n" "from one of Mandriva Linux sites which are prohibited or restricted in some countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or entities. Most \n" "of these components are governed under the terms and conditions of the GNU General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please read carefully the terms \n" "and conditions of the license agreement for each component before using any component. Any question \n" "on a component license should be addressed to the component author and not to Mandriva.\n" "The programs developed by Mandriva S.A. are governed by the GPL License. Documentation written \n" "by Mandriva S.A. is governed by a specific license. Please refer to the documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their respective authors and are \n" "protected by intellectual property and copyright laws applicable to software programs.\n" "Mandriva S.A. reserves its rights to modify or adapt the Software Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of Mandriva S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this \n" "portion is excluded from this contract. You remain bound by the other applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of France.\n" "All disputes on the terms of this license will preferably be settled out of court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.\n" "For any question on this document, please contact Mandriva S.A. \n" "" msgstr "" #: install_messages.pm:90 #, c-format msgid "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a patent\n" "may be applicable to you, check your local laws." msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:98 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" "" msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:131 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandriva Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandriva Linux User's Guide." msgstr "" #: install_steps.pm:253 #, c-format msgid "Duplicate mount point %s" msgstr "" #: install_steps.pm:475 #, c-format msgid "" "Some important packages did not get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm\"\n" "" msgstr "" #: install_steps_auto_install.pm:75 install_steps_stdio.pm:27 #, c-format msgid "" "Entering step `%s'\n" "" msgstr "" #: install_steps_gtk.pm:181 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandriva Linux. If that occurs, you can try a text install instead. For this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" #: install_steps_gtk.pm:211 install_steps_interactive.pm:628 #, c-format msgid "Package Group Selection" msgstr "" #: install_steps_gtk.pm:254 install_steps_interactive.pm:571 #, c-format msgid "Total size: %d / %d MB" msgstr "" #: install_steps_gtk.pm:299 #, c-format msgid "Bad package" msgstr "" #: install_steps_gtk.pm:301 #, c-format msgid "Version: " msgstr "" #: install_steps_gtk.pm:302 #, c-format msgid "Size: " msgstr "" #: install_steps_gtk.pm:302 #, c-format msgid "" "%d KB\n" "" msgstr "" #: install_steps_gtk.pm:303 #, c-format msgid "Importance: " msgstr "" #: install_steps_gtk.pm:336 #, c-format msgid "You can not select/unselect this package" msgstr "" #: install_steps_gtk.pm:340 network/thirdparty.pm:316 #, c-format msgid "due to missing %s" msgstr "" #: install_steps_gtk.pm:341 #, c-format msgid "due to unsatisfied %s" msgstr "" #: install_steps_gtk.pm:342 #, c-format msgid "trying to promote %s" msgstr "" #: install_steps_gtk.pm:343 #, c-format msgid "in order to keep %s" msgstr "" #: install_steps_gtk.pm:348 #, c-format msgid "You can not select this package as there is not enough space left to install it" msgstr "" #: install_steps_gtk.pm:351 #, c-format msgid "The following packages are going to be installed" msgstr "" #: install_steps_gtk.pm:352 #, c-format msgid "The following packages are going to be removed" msgstr "" #: install_steps_gtk.pm:376 #, c-format msgid "This is a mandatory package, it can not be unselected" msgstr "" #: install_steps_gtk.pm:378 #, c-format msgid "You can not unselect this package. It is already installed" msgstr "" #: install_steps_gtk.pm:381 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" #: install_steps_gtk.pm:384 #, c-format msgid "You can not unselect this package. It must be upgraded" msgstr "" #: install_steps_gtk.pm:389 #, c-format msgid "Show automatically selected packages" msgstr "" #: install_steps_gtk.pm:394 #, c-format msgid "Load/Save selection" msgstr "" #: install_steps_gtk.pm:395 #, c-format msgid "Updating package selection" msgstr "" #: install_steps_gtk.pm:400 #, c-format msgid "Minimal install" msgstr "" #: install_steps_gtk.pm:414 install_steps_interactive.pm:490 #, c-format msgid "Choose the packages you want to install" msgstr "" #: install_steps_gtk.pm:431 install_steps_interactive.pm:714 #, c-format msgid "Installing" msgstr "" #: install_steps_gtk.pm:460 #, c-format msgid "No details" msgstr "" #: install_steps_gtk.pm:475 #, c-format msgid "Time remaining " msgstr "" #: install_steps_gtk.pm:476 #, c-format msgid "Estimating" msgstr "" #: install_steps_gtk.pm:503 #, c-format msgid "%d packages" msgstr "" #: install_steps_gtk.pm:542 install_steps_interactive.pm:92 install_steps_interactive.pm:738 #, c-format msgid "Refuse" msgstr "" #: install_steps_gtk.pm:546 install_steps_interactive.pm:742 #, c-format msgid "" "Change your Cd-Rom!\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done.\n" "If you do not have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" #: install_steps_gtk.pm:559 install_steps_interactive.pm:753 #, c-format msgid "There was an error ordering packages:" msgstr "" #: install_steps_gtk.pm:561 install_steps_interactive.pm:757 #, c-format msgid "There was an error installing packages:" msgstr "" #: install_steps_gtk.pm:563 install_steps_interactive.pm:753 install_steps_interactive.pm:757 #, c-format msgid "Go on anyway?" msgstr "" #: install_steps_gtk.pm:585 install_steps_interactive.pm:933 steps.pm:30 #, c-format msgid "Summary" msgstr "" #: install_steps_gtk.pm:608 install_steps_interactive.pm:929 install_steps_interactive.pm:1078 #, c-format msgid "not configured" msgstr "" #: install_steps_gtk.pm:671 #, c-format msgid "" "The following installation media have been found.\n" "If you want to skip some of them, you can unselect them now." msgstr "" #: install_steps_gtk.pm:680 #, c-format msgid "" "You have the option to copy the contents of the CDs onto the hard drive before installation.\n" "It will then continue from the hard drive and the packages will remain available once the system is fully installed." msgstr "" #: install_steps_gtk.pm:682 #, c-format msgid "Copy whole CDs" msgstr "" #: install_steps_interactive.pm:84 #, c-format msgid "License agreement" msgstr "" #: install_steps_interactive.pm:89 install_steps_interactive.pm:89 #, c-format msgid "Release Notes" msgstr "" #: install_steps_interactive.pm:120 #, c-format msgid "Please choose your keyboard layout." msgstr "" #: install_steps_interactive.pm:122 #, c-format msgid "Here is the full list of available keyboards" msgstr "" #: install_steps_interactive.pm:152 #, c-format msgid "Install/Upgrade" msgstr "" #: install_steps_interactive.pm:153 #, c-format msgid "Is this an install or an upgrade?" msgstr "" #: install_steps_interactive.pm:159 #, c-format msgid "Upgrade %s" msgstr "" #: install_steps_interactive.pm:172 #, c-format msgid "Encryption key for %s" msgstr "" #: install_steps_interactive.pm:195 #, c-format msgid "Please choose your type of mouse." msgstr "" #: install_steps_interactive.pm:196 #, c-format msgid "Mouse choice" msgstr "" #: install_steps_interactive.pm:205 standalone/mousedrake:46 #, c-format msgid "Mouse Port" msgstr "" #: install_steps_interactive.pm:206 standalone/mousedrake:47 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "" #: install_steps_interactive.pm:216 #, c-format msgid "Buttons emulation" msgstr "" #: install_steps_interactive.pm:218 #, c-format msgid "Button 2 Emulation" msgstr "" #: install_steps_interactive.pm:219 #, c-format msgid "Button 3 Emulation" msgstr "" #: install_steps_interactive.pm:240 #, c-format msgid "PCMCIA" msgstr "" #: install_steps_interactive.pm:240 #, c-format msgid "Configuring PCMCIA cards..." msgstr "" #: install_steps_interactive.pm:247 #, c-format msgid "IDE" msgstr "" #: install_steps_interactive.pm:247 #, c-format msgid "Configuring IDE" msgstr "" #: install_steps_interactive.pm:267 #, c-format msgid "No partition available" msgstr "" #: install_steps_interactive.pm:270 #, c-format msgid "Scanning partitions to find mount points" msgstr "" #: install_steps_interactive.pm:277 #, c-format msgid "Choose the mount points" msgstr "" #: install_steps_interactive.pm:323 #, c-format msgid "No free space for 1MB bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" #: install_steps_interactive.pm:328 #, c-format msgid "You'll need to create a PPC PReP Boot bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" #: install_steps_interactive.pm:364 #, c-format msgid "Choose the partitions you want to format" msgstr "" #: install_steps_interactive.pm:366 #, c-format msgid "Check bad blocks?" msgstr "" #: install_steps_interactive.pm:394 #, c-format msgid "Failed to check filesystem %s. Do you want to repair the errors? (beware, you can lose data)" msgstr "" #: install_steps_interactive.pm:397 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "" #: install_steps_interactive.pm:406 #, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "" #: install_steps_interactive.pm:407 install_steps_interactive.pm:459 #, c-format msgid "Looking for available packages..." msgstr "" #: install_steps_interactive.pm:428 install_steps_interactive.pm:833 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "" #: install_steps_interactive.pm:468 #, c-format msgid "Your system does not have enough space left for installation or upgrade (%d > %d)" msgstr "" #: install_steps_interactive.pm:502 #, c-format msgid "" "Please choose load or save package selection.\n" "The format is the same as auto_install generated files." msgstr "" #: install_steps_interactive.pm:504 #, c-format msgid "Load" msgstr "" #: install_steps_interactive.pm:504 standalone/drakbackup:3932 standalone/drakbackup:4005 standalone/logdrake:175 #, c-format msgid "Save" msgstr "" #: install_steps_interactive.pm:512 #, c-format msgid "Bad file" msgstr "" #: install_steps_interactive.pm:585 #, c-format msgid "Selected size is larger than available space" msgstr "" #: install_steps_interactive.pm:600 #, c-format msgid "Type of install" msgstr "" #: install_steps_interactive.pm:601 #, c-format msgid "" "You have not selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" #: install_steps_interactive.pm:605 #, c-format msgid "With basic documentation (recommended!)" msgstr "" #: install_steps_interactive.pm:606 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "" #: install_steps_interactive.pm:645 standalone/drakxtv:52 #, c-format msgid "All" msgstr "" #: install_steps_interactive.pm:684 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" #: install_steps_interactive.pm:689 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "" #: install_steps_interactive.pm:714 #, c-format msgid "Preparing installation" msgstr "" #: install_steps_interactive.pm:722 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" #: install_steps_interactive.pm:771 #, c-format msgid "Post-install configuration" msgstr "" #: install_steps_interactive.pm:778 #, c-format msgid "Please ensure the Update Modules media is in drive %s" msgstr "" #: install_steps_interactive.pm:806 #, c-format msgid "Updates" msgstr "" #: install_steps_interactive.pm:807 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates?" msgstr "" #: install_steps_interactive.pm:828 #, c-format msgid "Contacting Mandriva Linux web site to get the list of available mirrors..." msgstr "" #: install_steps_interactive.pm:847 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "" #: install_steps_interactive.pm:851 #, c-format msgid "Unable to contact mirror %s" msgstr "" #: install_steps_interactive.pm:851 #, c-format msgid "Would you like to try again?" msgstr "" #: install_steps_interactive.pm:878 standalone/drakclock:45 #, c-format msgid "Which is your timezone?" msgstr "" #: install_steps_interactive.pm:883 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "" #: install_steps_interactive.pm:891 #, c-format msgid "NTP Server" msgstr "" #: install_steps_interactive.pm:946 install_steps_interactive.pm:954 install_steps_interactive.pm:972 install_steps_interactive.pm:979 install_steps_interactive.pm:1130 services.pm:133 standalone/drakbackup:1576 #, c-format msgid "System" msgstr "" #: install_steps_interactive.pm:986 install_steps_interactive.pm:1013 install_steps_interactive.pm:1030 install_steps_interactive.pm:1046 install_steps_interactive.pm:1057 #, c-format msgid "Hardware" msgstr "" #: install_steps_interactive.pm:992 install_steps_interactive.pm:1001 #, c-format msgid "Remote CUPS server" msgstr "" #: install_steps_interactive.pm:992 #, c-format msgid "No printer" msgstr "" #: install_steps_interactive.pm:1034 #, c-format msgid "Do you have an ISA sound card?" msgstr "" #: install_steps_interactive.pm:1036 #, c-format msgid "Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound card" msgstr "" #: install_steps_interactive.pm:1038 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" #: install_steps_interactive.pm:1058 #, c-format msgid "Graphical interface" msgstr "" #: install_steps_interactive.pm:1064 install_steps_interactive.pm:1076 #, c-format msgid "Network & Internet" msgstr "" #: install_steps_interactive.pm:1078 #, c-format msgid "configured" msgstr "" #: install_steps_interactive.pm:1087 install_steps_interactive.pm:1101 security/level.pm:55 steps.pm:20 #, c-format msgid "Security" msgstr "" #: install_steps_interactive.pm:1106 #, c-format msgid "activated" msgstr "" #: install_steps_interactive.pm:1106 #, c-format msgid "disabled" msgstr "" #: install_steps_interactive.pm:1117 #, c-format msgid "Boot" msgstr "" #. -PO: example: lilo-graphic on /dev/hda1 #: install_steps_interactive.pm:1121 printer/printerdrake.pm:974 #, c-format msgid "%s on %s" msgstr "" #: install_steps_interactive.pm:1135 services.pm:175 #, c-format msgid "Services: %d activated for %d registered" msgstr "" #: install_steps_interactive.pm:1147 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "" #: install_steps_interactive.pm:1228 #, c-format msgid "Preparing bootloader..." msgstr "" #: install_steps_interactive.pm:1238 #, c-format msgid "You appear to have an OldWorld or Unknown machine, the yaboot bootloader will not work for you. The install will continue, but you'll need to use BootX or some other means to boot your machine. The kernel argument for the root fs is: root=%s" msgstr "" #: install_steps_interactive.pm:1244 #, c-format msgid "Do you want to use aboot?" msgstr "" #: install_steps_interactive.pm:1247 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" #: install_steps_interactive.pm:1264 #, c-format msgid "In this security level, access to the files in the Windows partition is restricted to the administrator." msgstr "" #: install_steps_interactive.pm:1293 standalone/drakautoinst:76 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "" #: install_steps_interactive.pm:1298 #, c-format msgid "Please insert another floppy for drivers disk" msgstr "" #: install_steps_interactive.pm:1300 #, c-format msgid "Creating auto install floppy..." msgstr "" #: install_steps_interactive.pm:1312 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" #: install_steps_interactive.pm:1322 standalone/draksambashare:416 standalone/draksambashare:523 standalone/drakups:120 standalone/drakups:159 standalone/logdrake:452 standalone/logdrake:458 #, c-format msgid "Congratulations" msgstr "" #: install_steps_interactive.pm:1330 install_steps_interactive.pm:1331 #, c-format msgid "Generate auto install floppy" msgstr "" #: install_steps_interactive.pm:1332 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" "" msgstr "" #: install_steps_newt.pm:20 #, c-format msgid "Mandriva Linux Installation %s" msgstr "" #. -PO: This string must fit in a 80-char wide text screen #: install_steps_newt.pm:34 #, c-format msgid " / between elements | selects | next screen " msgstr "" #: interactive.pm:196 #, c-format msgid "Choose a file" msgstr "" #: interactive.pm:321 interactive/gtk.pm:507 standalone/drakbackup:1517 standalone/drakfont:655 standalone/drakhosts:242 standalone/draknfs:605 standalone/draksambashare:1123 standalone/drakups:301 standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:319 standalone/drakvpn:680 #, c-format msgid "Add" msgstr "" #: interactive.pm:321 interactive/gtk.pm:507 standalone/drakhosts:249 standalone/draknfs:612 standalone/draksambashare:1080 standalone/draksambashare:1133 standalone/draksambashare:1172 #, c-format msgid "Modify" msgstr "" #: interactive.pm:321 interactive/gtk.pm:507 standalone/drakhosts:256 standalone/draknfs:619 standalone/draksambashare:1081 standalone/draksambashare:1141 standalone/draksambashare:1180 standalone/drakups:303 standalone/drakups:363 standalone/drakups:383 standalone/drakvpn:319 standalone/drakvpn:680 #, c-format msgid "Remove" msgstr "" #: interactive.pm:398 #, c-format msgid "Basic" msgstr "" #: interactive.pm:436 interactive/newt.pm:321 ugtk2.pm:490 #, c-format msgid "Finish" msgstr "" #: interactive/newt.pm:92 #, c-format msgid "Do" msgstr "" #: interactive/stdio.pm:29 interactive/stdio.pm:148 #, c-format msgid "" "Bad choice, try again\n" "" msgstr "" #: interactive/stdio.pm:30 interactive/stdio.pm:149 #, c-format msgid "Your choice? (default %s) " msgstr "" #: interactive/stdio.pm:54 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" #: interactive/stdio.pm:70 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "" #: interactive/stdio.pm:94 #, c-format msgid "Button `%s': %s" msgstr "" #: interactive/stdio.pm:95 #, c-format msgid "Do you want to click on this button?" msgstr "" #: interactive/stdio.pm:104 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "" #: interactive/stdio.pm:104 #, c-format msgid " enter `void' for void entry" msgstr "" #: interactive/stdio.pm:122 #, c-format msgid "" "=> There are many things to choose from (%s).\n" "" msgstr "" #: interactive/stdio.pm:125 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" #: interactive/stdio.pm:138 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" #: interactive/stdio.pm:145 #, c-format msgid "Re-submit" msgstr "" #: keyboard.pm:171 keyboard.pm:205 #, c-format msgid "" "_: keyboard\n" "Czech (QWERTZ)" msgstr "" #: keyboard.pm:172 keyboard.pm:207 #, c-format msgid "" "_: keyboard\n" "German" msgstr "" #: keyboard.pm:173 #, c-format msgid "" "_: keyboard\n" "Dvorak" msgstr "" #: keyboard.pm:174 keyboard.pm:224 #, c-format msgid "" "_: keyboard\n" "Spanish" msgstr "" #: keyboard.pm:175 keyboard.pm:225 #, c-format msgid "" "_: keyboard\n" "Finnish" msgstr "" #: keyboard.pm:176 keyboard.pm:228 #, c-format msgid "" "_: keyboard\n" "French" msgstr "" #: keyboard.pm:177 keyboard.pm:272 #, c-format msgid "" "_: keyboard\n" "Norwegian" msgstr "" #: keyboard.pm:178 #, c-format msgid "" "_: keyboard\n" "Polish" msgstr "" #: keyboard.pm:179 keyboard.pm:284 #, c-format msgid "" "_: keyboard\n" "Russian" msgstr "" #: keyboard.pm:181 keyboard.pm:290 #, c-format msgid "" "_: keyboard\n" "Swedish" msgstr "" #: keyboard.pm:182 keyboard.pm:320 #, c-format msgid "UK keyboard" msgstr "" #: keyboard.pm:183 keyboard.pm:323 #, c-format msgid "US keyboard" msgstr "" #: keyboard.pm:185 #, c-format msgid "" "_: keyboard\n" "Albanian" msgstr "" #: keyboard.pm:186 #, c-format msgid "" "_: keyboard\n" "Armenian (old)" msgstr "" #: keyboard.pm:187 #, c-format msgid "" "_: keyboard\n" "Armenian (typewriter)" msgstr "" #: keyboard.pm:188 #, c-format msgid "" "_: keyboard\n" "Armenian (phonetic)" msgstr "" #: keyboard.pm:189 #, c-format msgid "" "_: keyboard\n" "Arabic" msgstr "" #: keyboard.pm:190 #, c-format msgid "" "_: keyboard\n" "Azerbaidjani (latin)" msgstr "" #: keyboard.pm:191 #, c-format msgid "" "_: keyboard\n" "Belgian" msgstr "" #: keyboard.pm:192 #, c-format msgid "" "_: keyboard\n" "Bengali (Inscript-layout)" msgstr "" #: keyboard.pm:193 #, c-format msgid "" "_: keyboard\n" "Bengali (Probhat)" msgstr "" #: keyboard.pm:194 #, c-format msgid "" "_: keyboard\n" "Bulgarian (phonetic)" msgstr "" #: keyboard.pm:195 #, c-format msgid "" "_: keyboard\n" "Bulgarian (BDS)" msgstr "" #: keyboard.pm:196 #, c-format msgid "" "_: keyboard\n" "Brazilian (ABNT-2)" msgstr "" #: keyboard.pm:197 #, c-format msgid "" "_: keyboard\n" "Bosnian" msgstr "" #: keyboard.pm:198 #, c-format msgid "" "_: keyboard\n" "Belarusian" msgstr "" #: keyboard.pm:200 #, c-format msgid "" "_: keyboard\n" "Swiss (German layout)" msgstr "" #: keyboard.pm:202 #, c-format msgid "" "_: keyboard\n" "Swiss (French layout)" msgstr "" #: keyboard.pm:204 #, c-format msgid "" "_: keyboard\n" "Cherokee syllabics" msgstr "" #: keyboard.pm:206 #, c-format msgid "" "_: keyboard\n" "Czech (QWERTY)" msgstr "" #: keyboard.pm:208 #, c-format msgid "" "_: keyboard\n" "German (no dead keys)" msgstr "" #: keyboard.pm:209 #, c-format msgid "" "_: keyboard\n" "Devanagari" msgstr "" #: keyboard.pm:210 #, c-format msgid "" "_: keyboard\n" "Danish" msgstr "" #: keyboard.pm:211 #, c-format msgid "" "_: keyboard\n" "Dvorak (US)" msgstr "" #: keyboard.pm:215 #, c-format msgid "" "_: keyboard\n" "Dvorak (French)" msgstr "" #: keyboard.pm:217 #, c-format msgid "" "_: keyboard\n" "Dvorak (UK)" msgstr "" #: keyboard.pm:218 #, c-format msgid "" "_: keyboard\n" "Dvorak (Norwegian)" msgstr "" #: keyboard.pm:220 #, c-format msgid "" "_: keyboard\n" "Dvorak (Polish)" msgstr "" #: keyboard.pm:221 #, c-format msgid "" "_: keyboard\n" "Dvorak (Swedish)" msgstr "" #: keyboard.pm:222 #, c-format msgid "" "_: keyboard\n" "Dzongkha/Tibetan" msgstr "" #: keyboard.pm:223 #, c-format msgid "" "_: keyboard\n" "Estonian" msgstr "" #: keyboard.pm:227 #, c-format msgid "" "_: keyboard\n" "Faroese" msgstr "" #: keyboard.pm:229 #, c-format msgid "" "_: keyboard\n" "Georgian (\"Russian\" layout)" msgstr "" #: keyboard.pm:230 #, c-format msgid "" "_: keyboard\n" "Georgian (\"Latin\" layout)" msgstr "" #: keyboard.pm:231 #, c-format msgid "" "_: keyboard\n" "Greek" msgstr "" #: keyboard.pm:232 #, c-format msgid "" "_: keyboard\n" "Greek (polytonic)" msgstr "" #: keyboard.pm:233 #, c-format msgid "" "_: keyboard\n" "Gujarati" msgstr "" #: keyboard.pm:234 #, c-format msgid "" "_: keyboard\n" "Gurmukhi" msgstr "" #: keyboard.pm:235 #, c-format msgid "" "_: keyboard\n" "Croatian" msgstr "" #: keyboard.pm:236 #, c-format msgid "" "_: keyboard\n" "Hungarian" msgstr "" #: keyboard.pm:237 #, c-format msgid "" "_: keyboard\n" "Irish" msgstr "" #: keyboard.pm:238 #, c-format msgid "" "_: keyboard\n" "Israeli" msgstr "" #: keyboard.pm:239 #, c-format msgid "" "_: keyboard\n" "Israeli (phonetic)" msgstr "" #: keyboard.pm:240 #, c-format msgid "" "_: keyboard\n" "Iranian" msgstr "" #: keyboard.pm:241 #, c-format msgid "" "_: keyboard\n" "Icelandic" msgstr "" #: keyboard.pm:242 #, c-format msgid "" "_: keyboard\n" "Italian" msgstr "" #: keyboard.pm:243 #, c-format msgid "" "_: keyboard\n" "Inuktitut" msgstr "" #: keyboard.pm:248 #, c-format msgid "" "_: keyboard\n" "Japanese 106 keys" msgstr "" #: keyboard.pm:249 #, c-format msgid "" "_: keyboard\n" "Kannada" msgstr "" #: keyboard.pm:252 #, c-format msgid "" "_: keyboard\n" "Korean" msgstr "" #: keyboard.pm:254 #, c-format msgid "" "_: keyboard\n" "Kurdish (arabic script)" msgstr "" #: keyboard.pm:255 #, c-format msgid "" "_: keyboard\n" "Kyrgyz" msgstr "" #: keyboard.pm:256 #, c-format msgid "" "_: keyboard\n" "Latin American" msgstr "" #: keyboard.pm:258 #, c-format msgid "" "_: keyboard\n" "Laotian" msgstr "" #: keyboard.pm:261 #, c-format msgid "" "_: keyboard\n" "Lithuanian AZERTY (new)" msgstr "" #: keyboard.pm:262 #, c-format msgid "" "_: keyboard\n" "Lithuanian \"number row\" QWERTY" msgstr "" #: keyboard.pm:264 #, c-format msgid "" "_: keyboard\n" "Latvian" msgstr "" #: keyboard.pm:265 #, c-format msgid "" "_: keyboard\n" "Malayalam" msgstr "" #: keyboard.pm:266 #, c-format msgid "" "_: keyboard\n" "Macedonian" msgstr "" #: keyboard.pm:267 #, c-format msgid "" "_: keyboard\n" "Myanmar (Burmese)" msgstr "" #: keyboard.pm:268 #, c-format msgid "" "_: keyboard\n" "Mongolian (cyrillic)" msgstr "" #: keyboard.pm:269 #, c-format msgid "" "_: keyboard\n" "Maltese (UK)" msgstr "" #: keyboard.pm:270 #, c-format msgid "" "_: keyboard\n" "Maltese (US)" msgstr "" #: keyboard.pm:271 #, c-format msgid "" "_: keyboard\n" "Dutch" msgstr "" #: keyboard.pm:273 #, c-format msgid "" "_: keyboard\n" "Oriya" msgstr "" #: keyboard.pm:274 #, c-format msgid "" "_: keyboard\n" "Polish (qwerty layout)" msgstr "" #: keyboard.pm:275 #, c-format msgid "" "_: keyboard\n" "Polish (qwertz layout)" msgstr "" #: keyboard.pm:277 #, c-format msgid "" "_: keyboard\n" "Pashto" msgstr "" #: keyboard.pm:278 #, c-format msgid "" "_: keyboard\n" "Portuguese" msgstr "" #: keyboard.pm:280 #, c-format msgid "" "_: keyboard\n" "Canadian (Quebec)" msgstr "" #: keyboard.pm:282 #, c-format msgid "" "_: keyboard\n" "Romanian (qwertz)" msgstr "" #: keyboard.pm:283 #, c-format msgid "" "_: keyboard\n" "Romanian (qwerty)" msgstr "" #: keyboard.pm:285 #, c-format msgid "" "_: keyboard\n" "Russian (phonetic)" msgstr "" #: keyboard.pm:286 #, c-format msgid "" "_: keyboard\n" "Saami (norwegian)" msgstr "" #: keyboard.pm:287 #, c-format msgid "" "_: keyboard\n" "Saami (swedish/finnish)" msgstr "" #: keyboard.pm:289 #, c-format msgid "" "_: keyboard\n" "Sindhi" msgstr "" #: keyboard.pm:291 #, c-format msgid "" "_: keyboard\n" "Slovenian" msgstr "" #: keyboard.pm:293 #, c-format msgid "" "_: keyboard\n" "Sinhala" msgstr "" #: keyboard.pm:294 #, c-format msgid "" "_: keyboard\n" "Slovakian (QWERTZ)" msgstr "" #: keyboard.pm:295 #, c-format msgid "" "_: keyboard\n" "Slovakian (QWERTY)" msgstr "" #: keyboard.pm:297 #, c-format msgid "" "_: keyboard\n" "Serbian (cyrillic)" msgstr "" #: keyboard.pm:298 #, c-format msgid "" "_: keyboard\n" "Syriac" msgstr "" #: keyboard.pm:299 #, c-format msgid "" "_: keyboard\n" "Syriac (phonetic)" msgstr "" #: keyboard.pm:300 #, c-format msgid "" "_: keyboard\n" "Telugu" msgstr "" #: keyboard.pm:302 #, c-format msgid "" "_: keyboard\n" "Tamil (ISCII-layout)" msgstr "" #: keyboard.pm:303 #, c-format msgid "" "_: keyboard\n" "Tamil (Typewriter-layout)" msgstr "" #: keyboard.pm:304 #, c-format msgid "" "_: keyboard\n" "Thai (Kedmanee)" msgstr "" #: keyboard.pm:305 #, c-format msgid "" "_: keyboard\n" "Thai (TIS-820)" msgstr "" #: keyboard.pm:307 #, c-format msgid "" "_: keyboard\n" "Thai (Pattachote)" msgstr "" #: keyboard.pm:310 #, c-format msgid "" "_: keyboard\n" "Tifinagh (moroccan layout) (+latin/arabic)" msgstr "" #: keyboard.pm:311 #, c-format msgid "" "_: keyboard\n" "Tifinagh (phonetic) (+latin/arabic)" msgstr "" #: keyboard.pm:313 #, c-format msgid "" "_: keyboard\n" "Tajik" msgstr "" #: keyboard.pm:315 #, c-format msgid "" "_: keyboard\n" "Turkmen" msgstr "" #: keyboard.pm:316 #, c-format msgid "" "_: keyboard\n" "Turkish (traditional \"F\" model)" msgstr "" #: keyboard.pm:317 #, c-format msgid "" "_: keyboard\n" "Turkish (modern \"Q\" model)" msgstr "" #: keyboard.pm:319 #, c-format msgid "" "_: keyboard\n" "Ukrainian" msgstr "" #: keyboard.pm:322 #, c-format msgid "" "_: keyboard\n" "Urdu keyboard" msgstr "" #: keyboard.pm:324 #, c-format msgid "US keyboard (international)" msgstr "" #: keyboard.pm:325 #, c-format msgid "" "_: keyboard\n" "Uzbek (cyrillic)" msgstr "" #: keyboard.pm:327 #, c-format msgid "" "_: keyboard\n" "Vietnamese \"numeric row\" QWERTY" msgstr "" #: keyboard.pm:328 #, c-format msgid "" "_: keyboard\n" "Yugoslavian (latin)" msgstr "" #: keyboard.pm:335 #, c-format msgid "Right Alt key" msgstr "" #: keyboard.pm:336 #, c-format msgid "Both Shift keys simultaneously" msgstr "" #: keyboard.pm:337 #, c-format msgid "Control and Shift keys simultaneously" msgstr "" #: keyboard.pm:338 #, c-format msgid "CapsLock key" msgstr "" #: keyboard.pm:339 #, c-format msgid "Shift and CapsLock keys simultaneously" msgstr "" #: keyboard.pm:340 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "" #: keyboard.pm:341 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "" #: keyboard.pm:342 #, c-format msgid "\"Menu\" key" msgstr "" #: keyboard.pm:343 #, c-format msgid "Left \"Windows\" key" msgstr "" #: keyboard.pm:344 #, c-format msgid "Right \"Windows\" key" msgstr "" #: keyboard.pm:345 #, c-format msgid "Both Control keys simultaneously" msgstr "" #: keyboard.pm:346 #, c-format msgid "Both Alt keys simultaneously" msgstr "" #: keyboard.pm:347 #, c-format msgid "Left Shift key" msgstr "" #: keyboard.pm:348 #, c-format msgid "Right Shift key" msgstr "" #: keyboard.pm:349 #, c-format msgid "Left Alt key" msgstr "" #: keyboard.pm:350 #, c-format msgid "Left Control key" msgstr "" #: keyboard.pm:351 #, c-format msgid "Right Control key" msgstr "" #: keyboard.pm:387 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" #: keyboard.pm:392 #, c-format msgid "" "This setting will be activated after the installation.\n" "During installation, you will need to use the Right Control\n" "key to switch between the different keyboard layouts." msgstr "" #. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR" #. -PO: or as "default:RTL", depending if your language is written from #. -PO: left to right, or from right to left; any other string is wrong. #: lang.pm:178 #, c-format msgid "default:LTR" msgstr "" #: lang.pm:195 #, c-format msgid "Andorra" msgstr "" #: lang.pm:196 network/adsl_consts.pm:943 #, c-format msgid "United Arab Emirates" msgstr "" #: lang.pm:197 #, c-format msgid "Afghanistan" msgstr "" #: lang.pm:198 #, c-format msgid "Antigua and Barbuda" msgstr "" #: lang.pm:199 #, c-format msgid "Anguilla" msgstr "" #: lang.pm:200 #, c-format msgid "Albania" msgstr "" #: lang.pm:201 #, c-format msgid "Armenia" msgstr "" #: lang.pm:202 #, c-format msgid "Netherlands Antilles" msgstr "" #: lang.pm:203 #, c-format msgid "Angola" msgstr "" #: lang.pm:204 #, c-format msgid "Antarctica" msgstr "" #: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50 #, c-format msgid "Argentina" msgstr "" #: lang.pm:206 #, c-format msgid "American Samoa" msgstr "" #: lang.pm:209 #, c-format msgid "Aruba" msgstr "" #: lang.pm:210 #, c-format msgid "Azerbaijan" msgstr "" #: lang.pm:211 #, c-format msgid "Bosnia and Herzegovina" msgstr "" #: lang.pm:212 #, c-format msgid "Barbados" msgstr "" #: lang.pm:213 #, c-format msgid "Bangladesh" msgstr "" #: lang.pm:215 #, c-format msgid "Burkina Faso" msgstr "" #: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179 #, c-format msgid "Bulgaria" msgstr "" #: lang.pm:217 #, c-format msgid "Bahrain" msgstr "" #: lang.pm:218 #, c-format msgid "Burundi" msgstr "" #: lang.pm:219 #, c-format msgid "Benin" msgstr "" #: lang.pm:220 #, c-format msgid "Bermuda" msgstr "" #: lang.pm:221 #, c-format msgid "Brunei Darussalam" msgstr "" #: lang.pm:222 #, c-format msgid "Bolivia" msgstr "" #: lang.pm:224 #, c-format msgid "Bahamas" msgstr "" #: lang.pm:225 #, c-format msgid "Bhutan" msgstr "" #: lang.pm:226 #, c-format msgid "Bouvet Island" msgstr "" #: lang.pm:227 #, c-format msgid "Botswana" msgstr "" #: lang.pm:228 #, c-format msgid "Belarus" msgstr "" #: lang.pm:229 #, c-format msgid "Belize" msgstr "" #: lang.pm:231 #, c-format msgid "Cocos (Keeling) Islands" msgstr "" #: lang.pm:232 #, c-format msgid "Congo (Kinshasa)" msgstr "" #: lang.pm:233 #, c-format msgid "Central African Republic" msgstr "" #: lang.pm:234 #, c-format msgid "Congo (Brazzaville)" msgstr "" #: lang.pm:236 #, c-format msgid "Cote d'Ivoire" msgstr "" #: lang.pm:237 #, c-format msgid "Cook Islands" msgstr "" #: lang.pm:238 #, c-format msgid "Chile" msgstr "" #: lang.pm:239 #, c-format msgid "Cameroon" msgstr "" #: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197 network/adsl_consts.pm:206 network/adsl_consts.pm:215 network/adsl_consts.pm:224 network/adsl_consts.pm:233 network/adsl_consts.pm:242 network/adsl_consts.pm:251 network/adsl_consts.pm:260 network/adsl_consts.pm:269 network/adsl_consts.pm:278 network/adsl_consts.pm:287 network/adsl_consts.pm:296 network/adsl_consts.pm:305 network/adsl_consts.pm:314 network/adsl_consts.pm:323 network/adsl_consts.pm:332 network/adsl_consts.pm:341 network/adsl_consts.pm:350 network/adsl_consts.pm:359 #, c-format msgid "China" msgstr "" #: lang.pm:241 #, c-format msgid "Colombia" msgstr "" #: lang.pm:243 #, c-format msgid "Serbia & Montenegro" msgstr "" #: lang.pm:244 #, c-format msgid "Cuba" msgstr "" #: lang.pm:245 #, c-format msgid "Cape Verde" msgstr "" #: lang.pm:246 #, c-format msgid "Christmas Island" msgstr "" #: lang.pm:247 #, c-format msgid "Cyprus" msgstr "" #: lang.pm:250 #, c-format msgid "Djibouti" msgstr "" #: lang.pm:252 #, c-format msgid "Dominica" msgstr "" #: lang.pm:253 #, c-format msgid "Dominican Republic" msgstr "" #: lang.pm:254 network/adsl_consts.pm:44 #, c-format msgid "Algeria" msgstr "" #: lang.pm:255 #, c-format msgid "Ecuador" msgstr "" #: lang.pm:257 #, c-format msgid "Egypt" msgstr "" #: lang.pm:258 #, c-format msgid "Western Sahara" msgstr "" #: lang.pm:259 #, c-format msgid "Eritrea" msgstr "" #: lang.pm:261 #, c-format msgid "Ethiopia" msgstr "" #: lang.pm:263 #, c-format msgid "Fiji" msgstr "" #: lang.pm:264 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "" #: lang.pm:265 #, c-format msgid "Micronesia" msgstr "" #: lang.pm:266 #, c-format msgid "Faroe Islands" msgstr "" #: lang.pm:268 #, c-format msgid "Gabon" msgstr "" #: lang.pm:269 network/adsl_consts.pm:954 network/adsl_consts.pm:965 network/netconnect.pm:46 #, c-format msgid "United Kingdom" msgstr "" #: lang.pm:270 #, c-format msgid "Grenada" msgstr "" #: lang.pm:271 #, c-format msgid "Georgia" msgstr "" #: lang.pm:272 #, c-format msgid "French Guiana" msgstr "" #: lang.pm:273 #, c-format msgid "Ghana" msgstr "" #: lang.pm:274 #, c-format msgid "Gibraltar" msgstr "" #: lang.pm:275 #, c-format msgid "Greenland" msgstr "" #: lang.pm:276 #, c-format msgid "Gambia" msgstr "" #: lang.pm:277 #, c-format msgid "Guinea" msgstr "" #: lang.pm:278 #, c-format msgid "Guadeloupe" msgstr "" #: lang.pm:279 #, c-format msgid "Equatorial Guinea" msgstr "" #: lang.pm:281 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "" #: lang.pm:282 #, c-format msgid "Guatemala" msgstr "" #: lang.pm:283 #, c-format msgid "Guam" msgstr "" #: lang.pm:284 #, c-format msgid "Guinea-Bissau" msgstr "" #: lang.pm:285 #, c-format msgid "Guyana" msgstr "" #: lang.pm:286 #, c-format msgid "Hong Kong SAR (China)" msgstr "" #: lang.pm:287 #, c-format msgid "Heard and McDonald Islands" msgstr "" #: lang.pm:288 #, c-format msgid "Honduras" msgstr "" #: lang.pm:289 #, c-format msgid "Croatia" msgstr "" #: lang.pm:290 #, c-format msgid "Haiti" msgstr "" #: lang.pm:292 #, c-format msgid "Indonesia" msgstr "" #: lang.pm:295 #, c-format msgid "India" msgstr "" #: lang.pm:296 #, c-format msgid "British Indian Ocean Territory" msgstr "" #: lang.pm:297 #, c-format msgid "Iraq" msgstr "" #: lang.pm:298 #, c-format msgid "Iran" msgstr "" #: lang.pm:299 #, c-format msgid "Iceland" msgstr "" #: lang.pm:301 #, c-format msgid "Jamaica" msgstr "" #: lang.pm:302 #, c-format msgid "Jordan" msgstr "" #: lang.pm:304 #, c-format msgid "Kenya" msgstr "" #: lang.pm:305 #, c-format msgid "Kyrgyzstan" msgstr "" #: lang.pm:306 #, c-format msgid "Cambodia" msgstr "" #: lang.pm:307 #, c-format msgid "Kiribati" msgstr "" #: lang.pm:308 #, c-format msgid "Comoros" msgstr "" #: lang.pm:309 #, c-format msgid "Saint Kitts and Nevis" msgstr "" #: lang.pm:310 #, c-format msgid "Korea (North)" msgstr "" #: lang.pm:311 #, c-format msgid "Korea" msgstr "" #: lang.pm:312 #, c-format msgid "Kuwait" msgstr "" #: lang.pm:313 #, c-format msgid "Cayman Islands" msgstr "" #: lang.pm:314 #, c-format msgid "Kazakhstan" msgstr "" #: lang.pm:315 #, c-format msgid "Laos" msgstr "" #: lang.pm:316 #, c-format msgid "Lebanon" msgstr "" #: lang.pm:317 #, c-format msgid "Saint Lucia" msgstr "" #: lang.pm:318 #, c-format msgid "Liechtenstein" msgstr "" #: lang.pm:319 #, c-format msgid "Sri Lanka" msgstr "" #: lang.pm:320 #, c-format msgid "Liberia" msgstr "" #: lang.pm:321 #, c-format msgid "Lesotho" msgstr "" #: lang.pm:322 network/adsl_consts.pm:600 #, c-format msgid "Lithuania" msgstr "" #: lang.pm:323 #, c-format msgid "Luxembourg" msgstr "" #: lang.pm:324 #, c-format msgid "Latvia" msgstr "" #: lang.pm:325 #, c-format msgid "Libya" msgstr "" #: lang.pm:326 network/adsl_consts.pm:609 #, c-format msgid "Morocco" msgstr "" #: lang.pm:327 #, c-format msgid "Monaco" msgstr "" #: lang.pm:328 #, c-format msgid "Moldova" msgstr "" #: lang.pm:329 #, c-format msgid "Madagascar" msgstr "" #: lang.pm:330 #, c-format msgid "Marshall Islands" msgstr "" #: lang.pm:331 #, c-format msgid "Macedonia" msgstr "" #: lang.pm:332 #, c-format msgid "Mali" msgstr "" #: lang.pm:333 #, c-format msgid "Myanmar" msgstr "" #: lang.pm:334 #, c-format msgid "Mongolia" msgstr "" #: lang.pm:335 #, c-format msgid "Northern Mariana Islands" msgstr "" #: lang.pm:336 #, c-format msgid "Martinique" msgstr "" #: lang.pm:337 #, c-format msgid "Mauritania" msgstr "" #: lang.pm:338 #, c-format msgid "Montserrat" msgstr "" #: lang.pm:339 #, c-format msgid "Malta" msgstr "" #: lang.pm:340 #, c-format msgid "Mauritius" msgstr "" #: lang.pm:341 #, c-format msgid "Maldives" msgstr "" #: lang.pm:342 #, c-format msgid "Malawi" msgstr "" #: lang.pm:343 #, c-format msgid "Mexico" msgstr "" #: lang.pm:344 #, c-format msgid "Malaysia" msgstr "" #: lang.pm:345 #, c-format msgid "Mozambique" msgstr "" #: lang.pm:346 #, c-format msgid "Namibia" msgstr "" #: lang.pm:347 #, c-format msgid "New Caledonia" msgstr "" #: lang.pm:348 #, c-format msgid "Niger" msgstr "" #: lang.pm:349 #, c-format msgid "Norfolk Island" msgstr "" #: lang.pm:350 #, c-format msgid "Nigeria" msgstr "" #: lang.pm:351 #, c-format msgid "Nicaragua" msgstr "" #: lang.pm:354 #, c-format msgid "Nepal" msgstr "" #: lang.pm:355 #, c-format msgid "Nauru" msgstr "" #: lang.pm:356 #, c-format msgid "Niue" msgstr "" #: lang.pm:358 #, c-format msgid "Oman" msgstr "" #: lang.pm:359 #, c-format msgid "Panama" msgstr "" #: lang.pm:360 #, c-format msgid "Peru" msgstr "" #: lang.pm:361 #, c-format msgid "French Polynesia" msgstr "" #: lang.pm:362 #, c-format msgid "Papua New Guinea" msgstr "" #: lang.pm:363 #, c-format msgid "Philippines" msgstr "" #: lang.pm:364 #, c-format msgid "Pakistan" msgstr "" #: lang.pm:366 #, c-format msgid "Saint Pierre and Miquelon" msgstr "" #: lang.pm:367 #, c-format msgid "Pitcairn" msgstr "" #: lang.pm:368 #, c-format msgid "Puerto Rico" msgstr "" #: lang.pm:369 #, c-format msgid "Palestine" msgstr "" #: lang.pm:371 #, c-format msgid "Paraguay" msgstr "" #: lang.pm:372 #, c-format msgid "Palau" msgstr "" #: lang.pm:373 #, c-format msgid "Qatar" msgstr "" #: lang.pm:374 #, c-format msgid "Reunion" msgstr "" #: lang.pm:375 #, c-format msgid "Romania" msgstr "" #: lang.pm:377 #, c-format msgid "Rwanda" msgstr "" #: lang.pm:378 #, c-format msgid "Saudi Arabia" msgstr "" #: lang.pm:379 #, c-format msgid "Solomon Islands" msgstr "" #: lang.pm:380 #, c-format msgid "Seychelles" msgstr "" #: lang.pm:381 #, c-format msgid "Sudan" msgstr "" #: lang.pm:383 #, c-format msgid "Singapore" msgstr "" #: lang.pm:384 #, c-format msgid "Saint Helena" msgstr "" #: lang.pm:385 network/adsl_consts.pm:747 #, c-format msgid "Slovenia" msgstr "" #: lang.pm:386 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "" #: lang.pm:388 #, c-format msgid "Sierra Leone" msgstr "" #: lang.pm:389 #, c-format msgid "San Marino" msgstr "" #: lang.pm:390 network/adsl_consts.pm:737 #, c-format msgid "Senegal" msgstr "" #: lang.pm:391 #, c-format msgid "Somalia" msgstr "" #: lang.pm:392 #, c-format msgid "Suriname" msgstr "" #: lang.pm:393 #, c-format msgid "Sao Tome and Principe" msgstr "" #: lang.pm:394 #, c-format msgid "El Salvador" msgstr "" #: lang.pm:395 #, c-format msgid "Syria" msgstr "" #: lang.pm:396 #, c-format msgid "Swaziland" msgstr "" #: lang.pm:397 #, c-format msgid "Turks and Caicos Islands" msgstr "" #: lang.pm:398 #, c-format msgid "Chad" msgstr "" #: lang.pm:399 #, c-format msgid "French Southern Territories" msgstr "" #: lang.pm:400 #, c-format msgid "Togo" msgstr "" #: lang.pm:402 #, c-format msgid "Tajikistan" msgstr "" #: lang.pm:403 #, c-format msgid "Tokelau" msgstr "" #: lang.pm:404 #, c-format msgid "East Timor" msgstr "" #: lang.pm:405 #, c-format msgid "Turkmenistan" msgstr "" #: lang.pm:406 network/adsl_consts.pm:931 #, c-format msgid "Tunisia" msgstr "" #: lang.pm:407 #, c-format msgid "Tonga" msgstr "" #: lang.pm:408 #, c-format msgid "Turkey" msgstr "" #: lang.pm:409 #, c-format msgid "Trinidad and Tobago" msgstr "" #: lang.pm:410 #, c-format msgid "Tuvalu" msgstr "" #: lang.pm:412 #, c-format msgid "Tanzania" msgstr "" #: lang.pm:413 #, c-format msgid "Ukraine" msgstr "" #: lang.pm:414 #, c-format msgid "Uganda" msgstr "" #: lang.pm:415 #, c-format msgid "United States Minor Outlying Islands" msgstr "" #: lang.pm:417 #, c-format msgid "Uruguay" msgstr "" #: lang.pm:418 #, c-format msgid "Uzbekistan" msgstr "" #: lang.pm:419 #, c-format msgid "Vatican" msgstr "" #: lang.pm:420 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "" #: lang.pm:421 #, c-format msgid "Venezuela" msgstr "" #: lang.pm:422 #, c-format msgid "Virgin Islands (British)" msgstr "" #: lang.pm:423 #, c-format msgid "Virgin Islands (U.S.)" msgstr "" #: lang.pm:424 #, c-format msgid "Vietnam" msgstr "" #: lang.pm:425 #, c-format msgid "Vanuatu" msgstr "" #: lang.pm:426 #, c-format msgid "Wallis and Futuna" msgstr "" #: lang.pm:427 #, c-format msgid "Samoa" msgstr "" #: lang.pm:428 #, c-format msgid "Yemen" msgstr "" #: lang.pm:429 #, c-format msgid "Mayotte" msgstr "" #: lang.pm:431 #, c-format msgid "Zambia" msgstr "" #: lang.pm:432 #, c-format msgid "Zimbabwe" msgstr "" #: lang.pm:1141 #, c-format msgid "Welcome to %s" msgstr "" #: lvm.pm:83 #, c-format msgid "Moving used physical extents to other physical volumes failed" msgstr "" #: lvm.pm:135 #, c-format msgid "Physical volume %s is still in use" msgstr "" #: lvm.pm:145 #, c-format msgid "" "Remove the logical volumes first\n" "" msgstr "" #: lvm.pm:178 #, c-format msgid "The bootloader can't handle /boot on multiple physicals volumes" msgstr "" #: modules/interactive.pm:21 standalone/drakconnect:1027 #, c-format msgid "Parameters" msgstr "" #: modules/interactive.pm:21 standalone/draksec:51 #, c-format msgid "NONE" msgstr "" #: modules/interactive.pm:22 #, c-format msgid "Module configuration" msgstr "" #: modules/interactive.pm:22 #, c-format msgid "You can configure each parameter of the module here." msgstr "" #: modules/interactive.pm:63 #, c-format msgid "Found %s interfaces" msgstr "" #: modules/interactive.pm:64 #, c-format msgid "Do you have another one?" msgstr "" #: modules/interactive.pm:65 #, c-format msgid "Do you have any %s interfaces?" msgstr "" #: modules/interactive.pm:71 #, c-format msgid "See hardware info" msgstr "" #: modules/interactive.pm:82 #, c-format msgid "Installing driver for USB controller" msgstr "" #: modules/interactive.pm:83 #, c-format msgid "Installing driver for firewire controller %s" msgstr "" #: modules/interactive.pm:84 #, c-format msgid "Installing driver for hard drive controller %s" msgstr "" #: modules/interactive.pm:85 #, c-format msgid "Installing driver for ethernet controller %s" msgstr "" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: modules/interactive.pm:96 #, c-format msgid "Installing driver for %s card %s" msgstr "" #: modules/interactive.pm:99 #, c-format msgid "(module %s)" msgstr "" #: modules/interactive.pm:109 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" #: modules/interactive.pm:115 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" #: modules/interactive.pm:117 #, c-format msgid "Module options:" msgstr "" #. -PO: the %s is the driver type (scsi, network, sound,...) #: modules/interactive.pm:130 #, c-format msgid "Which %s driver should I try?" msgstr "" #: modules/interactive.pm:139 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it should\n" "not cause any damage." msgstr "" #: modules/interactive.pm:143 #, c-format msgid "Autoprobe" msgstr "" #: modules/interactive.pm:143 #, c-format msgid "Specify options" msgstr "" #: modules/interactive.pm:155 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" #: modules/parameters.pm:49 #, c-format msgid "a number" msgstr "" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated numbers" msgstr "" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated strings" msgstr "" #: modules/parameters.pm:53 #, c-format msgid "comma separated numbers" msgstr "" #: modules/parameters.pm:53 #, c-format msgid "comma separated strings" msgstr "" #: mouse.pm:25 #, c-format msgid "Sun - Mouse" msgstr "" #: mouse.pm:31 security/level.pm:12 #, c-format msgid "Standard" msgstr "" #: mouse.pm:32 #, c-format msgid "Logitech MouseMan+" msgstr "" #: mouse.pm:33 #, c-format msgid "Generic PS2 Wheel Mouse" msgstr "" #: mouse.pm:34 #, c-format msgid "GlidePoint" msgstr "" #: mouse.pm:36 network/modem.pm:47 network/modem.pm:48 network/modem.pm:49 network/modem.pm:68 network/modem.pm:81 network/modem.pm:86 network/modem.pm:115 network/netconnect.pm:580 network/netconnect.pm:585 network/netconnect.pm:597 network/netconnect.pm:602 network/netconnect.pm:618 network/netconnect.pm:620 #, c-format msgid "Automatic" msgstr "" #: mouse.pm:39 mouse.pm:73 #, c-format msgid "Kensington Thinking Mouse" msgstr "" #: mouse.pm:40 mouse.pm:68 #, c-format msgid "Genius NetMouse" msgstr "" #: mouse.pm:41 #, c-format msgid "Genius NetScroll" msgstr "" #: mouse.pm:42 mouse.pm:52 #, c-format msgid "Microsoft Explorer" msgstr "" #: mouse.pm:47 mouse.pm:79 #, c-format msgid "1 button" msgstr "" #: mouse.pm:48 mouse.pm:57 #, c-format msgid "Generic 2 Button Mouse" msgstr "" #: mouse.pm:50 mouse.pm:59 #, c-format msgid "Generic 3 Button Mouse with Wheel emulation" msgstr "" #: mouse.pm:51 #, c-format msgid "Wheel" msgstr "" #: mouse.pm:55 #, c-format msgid "serial" msgstr "" #: mouse.pm:58 #, c-format msgid "Generic 3 Button Mouse" msgstr "" #: mouse.pm:60 #, c-format msgid "Microsoft IntelliMouse" msgstr "" #: mouse.pm:61 #, c-format msgid "Logitech MouseMan" msgstr "" #: mouse.pm:62 #, c-format msgid "Logitech MouseMan with Wheel emulation" msgstr "" #: mouse.pm:63 #, c-format msgid "Mouse Systems" msgstr "" #: mouse.pm:65 #, c-format msgid "Logitech CC Series" msgstr "" #: mouse.pm:66 #, c-format msgid "Logitech CC Series with Wheel emulation" msgstr "" #: mouse.pm:67 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "" #: mouse.pm:69 #, c-format msgid "MM Series" msgstr "" #: mouse.pm:70 #, c-format msgid "MM HitTablet" msgstr "" #: mouse.pm:71 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "" #: mouse.pm:72 #, c-format msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" msgstr "" #: mouse.pm:74 #, c-format msgid "Kensington Thinking Mouse with Wheel emulation" msgstr "" #: mouse.pm:77 #, c-format msgid "busmouse" msgstr "" #: mouse.pm:80 #, c-format msgid "2 buttons" msgstr "" #: mouse.pm:81 #, c-format msgid "3 buttons" msgstr "" #: mouse.pm:82 #, c-format msgid "3 buttons with Wheel emulation" msgstr "" #: mouse.pm:86 #, c-format msgid "Universal" msgstr "" #: mouse.pm:88 #, c-format msgid "Any PS/2 & USB mice" msgstr "" #: mouse.pm:89 #, c-format msgid "Microsoft Xbox Controller S" msgstr "" #: mouse.pm:93 standalone/drakconnect:351 standalone/drakvpn:1126 #, c-format msgid "none" msgstr "" #: mouse.pm:95 #, c-format msgid "No mouse" msgstr "" #: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435 #, c-format msgid "Synaptics Touchpad" msgstr "" #: mouse.pm:561 #, c-format msgid "Please test the mouse" msgstr "" #: mouse.pm:563 #, c-format msgid "To activate the mouse," msgstr "" #: mouse.pm:564 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "" #: network/drakfirewall.pm:12 share/compssUsers.pl:85 #, c-format msgid "Web Server" msgstr "" #: network/drakfirewall.pm:17 #, c-format msgid "Domain Name Server" msgstr "" #: network/drakfirewall.pm:22 #, c-format msgid "SSH server" msgstr "" #: network/drakfirewall.pm:27 #, c-format msgid "FTP server" msgstr "" #: network/drakfirewall.pm:32 #, c-format msgid "Mail Server" msgstr "" #: network/drakfirewall.pm:37 #, c-format msgid "POP and IMAP Server" msgstr "" #: network/drakfirewall.pm:42 #, c-format msgid "Telnet server" msgstr "" #: network/drakfirewall.pm:48 #, c-format msgid "Windows Files Sharing (SMB)" msgstr "" #: network/drakfirewall.pm:54 #, c-format msgid "CUPS server" msgstr "" #: network/drakfirewall.pm:60 #, c-format msgid "Echo request (ping)" msgstr "" #: network/drakfirewall.pm:65 #, c-format msgid "BitTorrent" msgstr "" #: network/drakfirewall.pm:74 #, c-format msgid "Port scan detection" msgstr "" #: network/drakfirewall.pm:165 #, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandriva Linux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized Mandriva Security Firewall distribution." msgstr "" #: network/drakfirewall.pm:171 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" #: network/drakfirewall.pm:188 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "" #: network/drakfirewall.pm:191 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n" "Have a look at /etc/services for information." msgstr "" #: network/drakfirewall.pm:197 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535.\n" "\n" "You can also give a range of ports (eg: 24300:24350/udp)" msgstr "" #: network/drakfirewall.pm:207 #, c-format msgid "Everything (no firewall)" msgstr "" #: network/drakfirewall.pm:209 #, c-format msgid "Other ports" msgstr "" #: network/drakfirewall.pm:251 network/drakfirewall.pm:254 standalone/drakids:33 standalone/drakids:136 standalone/drakids:145 standalone/drakids:170 standalone/drakids:179 standalone/drakids:189 standalone/drakids:265 standalone/net_applet:59 standalone/net_applet:180 standalone/net_applet:354 standalone/net_applet:391 #, c-format msgid "Interactive Firewall" msgstr "" #: network/drakfirewall.pm:252 #, c-format msgid "" "You can be warned when someone accesses to a service or tries to intrude into your computer.\n" "Please select which network activity should be watched." msgstr "" #: network/drakfirewall.pm:257 #, c-format msgid "Use Interactive Firewall" msgstr "" #: network/ifw.pm:136 #, c-format msgid "Port scanning" msgstr "" #: network/ifw.pm:137 #, c-format msgid "Service attack" msgstr "" #: network/ifw.pm:138 #, c-format msgid "Password cracking" msgstr "" #: network/ifw.pm:139 #, c-format msgid "\"%s\" attack" msgstr "" #: network/ifw.pm:141 #, c-format msgid "A port scanning attack has been attempted by %s." msgstr "" #: network/ifw.pm:142 #, c-format msgid "The %s service has been attacked by %s." msgstr "" #: network/ifw.pm:143 #, c-format msgid "A password cracking attack has been attempted by %s." msgstr "" #: network/ifw.pm:144 #, c-format msgid "A \"%s\" attack has been attempted by %s" msgstr "" #: network/isdn.pm:117 network/netconnect.pm:452 network/netconnect.pm:541 network/netconnect.pm:544 network/netconnect.pm:687 network/netconnect.pm:691 #, c-format msgid "Unlisted - edit manually" msgstr "" #: network/isdn.pm:160 network/netconnect.pm:384 #, c-format msgid "ISA / PCMCIA" msgstr "" #: network/isdn.pm:160 network/netconnect.pm:384 #, c-format msgid "I do not know" msgstr "" #: network/isdn.pm:161 network/netconnect.pm:384 #, c-format msgid "PCI" msgstr "" #: network/isdn.pm:162 network/netconnect.pm:384 #, c-format msgid "USB" msgstr "" #: network/modem.pm:47 network/modem.pm:48 network/modem.pm:49 network/netconnect.pm:585 network/netconnect.pm:602 network/netconnect.pm:618 #, c-format msgid "Manual" msgstr "" #: network/ndiswrapper.pm:27 #, c-format msgid "No device supporting the %s ndiswrapper driver is present!" msgstr "" #: network/ndiswrapper.pm:33 #, c-format msgid "Please select the Windows driver (.inf file)" msgstr "" #: network/ndiswrapper.pm:42 #, c-format msgid "Unable to install the %s ndiswrapper driver!" msgstr "" #: network/ndiswrapper.pm:89 #, c-format msgid "Unable to load the ndiswrapper module!" msgstr "" #: network/ndiswrapper.pm:95 #, c-format msgid "" "The selected device has already been configured with the %s driver.\n" "Do you really want to use a ndiswrapper driver?" msgstr "" #: network/ndiswrapper.pm:101 #, c-format msgid "Unable to find the ndiswrapper interface!" msgstr "" #: network/netconnect.pm:69 network/netconnect.pm:482 network/netconnect.pm:489 #, c-format msgid "Manual choice" msgstr "" #: network/netconnect.pm:69 #, c-format msgid "Internal ISDN card" msgstr "" #: network/netconnect.pm:80 printer/printerdrake.pm:1643 standalone/drakups:75 #, c-format msgid "Manual configuration" msgstr "" #: network/netconnect.pm:81 standalone/drakroam:113 #, c-format msgid "Automatic IP (BOOTP/DHCP)" msgstr "" #: network/netconnect.pm:83 #, c-format msgid "Automatic IP (BOOTP/DHCP/Zeroconf)" msgstr "" #: network/netconnect.pm:86 #, c-format msgid "Protocol for the rest of the world" msgstr "" #: network/netconnect.pm:88 standalone/drakconnect:563 #, c-format msgid "European protocol (EDSS1)" msgstr "" #: network/netconnect.pm:89 standalone/drakconnect:564 #, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" #: network/netconnect.pm:103 standalone/harddrake2:306 standalone/net_monitor:102 standalone/net_monitor:103 standalone/net_monitor:108 #, c-format msgid "unknown" msgstr "" #: network/netconnect.pm:120 network/thirdparty.pm:206 #, c-format msgid "Alcatel speedtouch USB modem" msgstr "" #: network/netconnect.pm:121 #, c-format msgid "Sagem USB modem" msgstr "" #: network/netconnect.pm:122 #, c-format msgid "Bewan modem" msgstr "" #: network/netconnect.pm:123 #, c-format msgid "ECI Hi-Focus modem" msgstr "" #: network/netconnect.pm:127 #, c-format msgid "Dynamic Host Configuration Protocol (DHCP)" msgstr "" #: network/netconnect.pm:128 #, c-format msgid "Manual TCP/IP configuration" msgstr "" #: network/netconnect.pm:129 #, c-format msgid "Point to Point Tunneling Protocol (PPTP)" msgstr "" #: network/netconnect.pm:130 #, c-format msgid "PPP over Ethernet (PPPoE)" msgstr "" #: network/netconnect.pm:131 #, c-format msgid "PPP over ATM (PPPoA)" msgstr "" #: network/netconnect.pm:132 #, c-format msgid "DSL over CAPI" msgstr "" #: network/netconnect.pm:136 #, c-format msgid "Bridged Ethernet LLC" msgstr "" #: network/netconnect.pm:137 #, c-format msgid "Bridged Ethernet VC" msgstr "" #: network/netconnect.pm:138 #, c-format msgid "Routed IP LLC" msgstr "" #: network/netconnect.pm:139 #, c-format msgid "Routed IP VC" msgstr "" #: network/netconnect.pm:140 #, c-format msgid "PPPoA LLC" msgstr "" #: network/netconnect.pm:141 #, c-format msgid "PPPoA VC" msgstr "" #: network/netconnect.pm:145 standalone/drakconnect:498 #, c-format msgid "Script-based" msgstr "" #: network/netconnect.pm:146 standalone/drakconnect:498 #, c-format msgid "PAP" msgstr "" #: network/netconnect.pm:147 standalone/drakconnect:498 #, c-format msgid "Terminal-based" msgstr "" #: network/netconnect.pm:148 standalone/drakconnect:498 #, c-format msgid "CHAP" msgstr "" #: network/netconnect.pm:149 standalone/drakconnect:498 #, c-format msgid "PAP/CHAP" msgstr "" #: network/netconnect.pm:239 standalone/drakconnect:56 #, c-format msgid "Network & Internet Configuration" msgstr "" #: network/netconnect.pm:245 #, c-format msgid "LAN connection" msgstr "" #: network/netconnect.pm:246 network/netconnect.pm:265 standalone/drakroam:140 standalone/drakroam:158 standalone/drakroam:161 #, c-format msgid "Wireless connection" msgstr "" #: network/netconnect.pm:247 #, c-format msgid "ADSL connection" msgstr "" #: network/netconnect.pm:248 #, c-format msgid "Cable connection" msgstr "" #: network/netconnect.pm:249 #, c-format msgid "ISDN connection" msgstr "" #: network/netconnect.pm:250 #, c-format msgid "Modem connection" msgstr "" #: network/netconnect.pm:251 #, c-format msgid "DVB connection" msgstr "" #: network/netconnect.pm:261 #, c-format msgid "Choose the connection you want to configure" msgstr "" #: network/netconnect.pm:276 network/netconnect.pm:764 #, c-format msgid "Connection Configuration" msgstr "" #: network/netconnect.pm:276 network/netconnect.pm:765 #, c-format msgid "Please fill or check the field below" msgstr "" #: network/netconnect.pm:279 #, c-format msgid "Your personal phone number" msgstr "" #: network/netconnect.pm:280 network/netconnect.pm:768 #, c-format msgid "Provider name (ex provider.net)" msgstr "" #: network/netconnect.pm:281 standalone/drakconnect:493 #, c-format msgid "Provider phone number" msgstr "" #: network/netconnect.pm:282 #, c-format msgid "Provider DNS 1 (optional)" msgstr "" #: network/netconnect.pm:283 #, c-format msgid "Provider DNS 2 (optional)" msgstr "" #: network/netconnect.pm:284 standalone/drakconnect:444 #, c-format msgid "Dialing mode" msgstr "" #: network/netconnect.pm:285 standalone/drakconnect:449 standalone/drakconnect:517 #, c-format msgid "Connection speed" msgstr "" #: network/netconnect.pm:286 standalone/drakconnect:454 #, c-format msgid "Connection timeout (in sec)" msgstr "" #: network/netconnect.pm:287 network/netconnect.pm:312 network/netconnect.pm:771 standalone/drakconnect:491 #, c-format msgid "Account Login (user name)" msgstr "" #: network/netconnect.pm:288 network/netconnect.pm:313 network/netconnect.pm:772 standalone/drakconnect:492 #, c-format msgid "Account Password" msgstr "" #: network/netconnect.pm:289 standalone/drakconnect:554 #, c-format msgid "Card IRQ" msgstr "" #: network/netconnect.pm:290 standalone/drakconnect:555 #, c-format msgid "Card mem (DMA)" msgstr "" #: network/netconnect.pm:291 standalone/drakconnect:556 #, c-format msgid "Card IO" msgstr "" #: network/netconnect.pm:292 standalone/drakconnect:557 #, c-format msgid "Card IO_0" msgstr "" #: network/netconnect.pm:293 #, c-format msgid "Card IO_1" msgstr "" #: network/netconnect.pm:308 #, c-format msgid "Cable: account options" msgstr "" #: network/netconnect.pm:311 #, c-format msgid "Use BPALogin (needed for Telstra)" msgstr "" #: network/netconnect.pm:337 network/netconnect.pm:654 network/netconnect.pm:804 network/netconnect.pm:1138 #, c-format msgid "Select the network interface to configure:" msgstr "" #: network/netconnect.pm:339 network/netconnect.pm:374 network/netconnect.pm:655 network/netconnect.pm:806 network/shorewall.pm:65 standalone/drakconnect:713 #, c-format msgid "Net Device" msgstr "" #: network/netconnect.pm:340 network/netconnect.pm:345 #, c-format msgid "External ISDN modem" msgstr "" #: network/netconnect.pm:373 standalone/harddrake2:216 #, c-format msgid "Select a device!" msgstr "" #: network/netconnect.pm:382 network/netconnect.pm:392 network/netconnect.pm:402 network/netconnect.pm:435 network/netconnect.pm:449 #, c-format msgid "ISDN Configuration" msgstr "" #: network/netconnect.pm:383 #, c-format msgid "What kind of card do you have?" msgstr "" #: network/netconnect.pm:393 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your card.\n" "" msgstr "" #: network/netconnect.pm:397 #, c-format msgid "Continue" msgstr "" #: network/netconnect.pm:397 #, c-format msgid "Abort" msgstr "" #: network/netconnect.pm:403 #, c-format msgid "Which of the following is your ISDN card?" msgstr "" #: network/netconnect.pm:421 #, c-format msgid "A CAPI driver is available for this modem. This CAPI driver can offer more capabilities than the free driver (like sending faxes). Which driver do you want to use?" msgstr "" #: network/netconnect.pm:423 standalone/drakconnect:109 standalone/drakups:251 standalone/harddrake2:133 #, c-format msgid "Driver" msgstr "" #: network/netconnect.pm:435 #, c-format msgid "Which protocol do you want to use?" msgstr "" #: network/netconnect.pm:437 standalone/drakconnect:109 standalone/drakconnect:300 standalone/drakconnect:562 standalone/drakids:207 standalone/drakvpn:1128 #, c-format msgid "Protocol" msgstr "" #: network/netconnect.pm:449 #, c-format msgid "" "Select your provider.\n" "If it is not listed, choose Unlisted." msgstr "" #: network/netconnect.pm:451 network/netconnect.pm:540 network/netconnect.pm:686 #, c-format msgid "Provider:" msgstr "" #: network/netconnect.pm:460 #, c-format msgid "" "Your modem is not supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" #: network/netconnect.pm:479 #, c-format msgid "Select the modem to configure:" msgstr "" #: network/netconnect.pm:509 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "" #: network/netconnect.pm:538 #, c-format msgid "Select your provider:" msgstr "" #: network/netconnect.pm:562 #, c-format msgid "Dialup: account options" msgstr "" #: network/netconnect.pm:565 #, c-format msgid "Connection name" msgstr "" #: network/netconnect.pm:566 #, c-format msgid "Phone number" msgstr "" #: network/netconnect.pm:567 #, c-format msgid "Login ID" msgstr "" #: network/netconnect.pm:582 network/netconnect.pm:615 #, c-format msgid "Dialup: IP parameters" msgstr "" #: network/netconnect.pm:585 #, c-format msgid "IP parameters" msgstr "" #: network/netconnect.pm:586 network/netconnect.pm:909 printer/printerdrake.pm:460 standalone/drakconnect:109 standalone/drakconnect:316 standalone/drakconnect:882 standalone/drakhosts:197 standalone/drakroam:114 standalone/drakups:286 #, c-format msgid "IP address" msgstr "" #: network/netconnect.pm:587 #, c-format msgid "Subnet mask" msgstr "" #: network/netconnect.pm:599 #, c-format msgid "Dialup: DNS parameters" msgstr "" #: network/netconnect.pm:602 #, c-format msgid "DNS" msgstr "" #: network/netconnect.pm:603 #, c-format msgid "Domain name" msgstr "" #: network/netconnect.pm:604 network/netconnect.pm:769 standalone/drakconnect:992 #, c-format msgid "First DNS Server (optional)" msgstr "" #: network/netconnect.pm:605 network/netconnect.pm:770 standalone/drakconnect:993 #, c-format msgid "Second DNS Server (optional)" msgstr "" #: network/netconnect.pm:606 #, c-format msgid "Set hostname from IP" msgstr "" #: network/netconnect.pm:618 standalone/drakconnect:327 #, c-format msgid "Gateway" msgstr "" #: network/netconnect.pm:619 standalone/drakroam:116 #, c-format msgid "Gateway IP address" msgstr "" #: network/netconnect.pm:654 #, c-format msgid "ADSL configuration" msgstr "" #: network/netconnect.pm:684 #, c-format msgid "Please choose your ADSL provider" msgstr "" #: network/netconnect.pm:714 #, c-format msgid "" "Please choose your DSL connection type.\n" "If you do not know it, keep the preselected type." msgstr "" #: network/netconnect.pm:717 #, c-format msgid "ADSL connection type:" msgstr "" #: network/netconnect.pm:774 #, c-format msgid "Virtual Path ID (VPI):" msgstr "" #: network/netconnect.pm:775 #, c-format msgid "Virtual Circuit ID (VCI):" msgstr "" #: network/netconnect.pm:778 #, c-format msgid "Encapsulation:" msgstr "" #: network/netconnect.pm:808 #, c-format msgid "Manually load a driver" msgstr "" #: network/netconnect.pm:809 #, c-format msgid "Use a Windows driver (with ndiswrapper)" msgstr "" #: network/netconnect.pm:865 #, c-format msgid "Zeroconf hostname resolution" msgstr "" #: network/netconnect.pm:866 network/netconnect.pm:896 #, c-format msgid "Configuring network device %s (driver %s)" msgstr "" #: network/netconnect.pm:867 #, c-format msgid "The following protocols can be used to configure a LAN connection. Please choose the one you want to use" msgstr "" #: network/netconnect.pm:897 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" #: network/netconnect.pm:904 standalone/drakconnect:373 #, c-format msgid "Assign host name from DHCP address" msgstr "" #: network/netconnect.pm:905 standalone/drakconnect:375 #, c-format msgid "DHCP host name" msgstr "" #: network/netconnect.pm:910 standalone/drakconnect:321 standalone/drakconnect:883 standalone/drakgw:181 #, c-format msgid "Netmask" msgstr "" #: network/netconnect.pm:912 standalone/drakconnect:437 #, c-format msgid "Track network card id (useful for laptops)" msgstr "" #: network/netconnect.pm:913 standalone/drakconnect:438 #, c-format msgid "Network Hotplugging" msgstr "" #: network/netconnect.pm:915 standalone/drakconnect:432 #, c-format msgid "Start at boot" msgstr "" #: network/netconnect.pm:917 standalone/drakconnect:460 #, c-format msgid "Metric" msgstr "" #: network/netconnect.pm:918 #, c-format msgid "Enable IPv6 to IPv4 tunnel" msgstr "" #: network/netconnect.pm:920 standalone/drakconnect:369 standalone/drakconnect:886 #, c-format msgid "DHCP client" msgstr "" #: network/netconnect.pm:922 standalone/drakconnect:379 #, c-format msgid "DHCP timeout (in seconds)" msgstr "" #: network/netconnect.pm:923 standalone/drakconnect:382 #, c-format msgid "Get DNS servers from DHCP" msgstr "" #: network/netconnect.pm:924 standalone/drakconnect:383 #, c-format msgid "Get YP servers from DHCP" msgstr "" #: network/netconnect.pm:925 standalone/drakconnect:384 #, c-format msgid "Get NTPD servers from DHCP" msgstr "" #: network/netconnect.pm:933 printer/printerdrake.pm:1897 standalone/drakconnect:676 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "" #: network/netconnect.pm:937 standalone/drakconnect:680 #, c-format msgid "Netmask should be in format 255.255.224.0" msgstr "" #: network/netconnect.pm:941 #, c-format msgid "Warning: IP address %s is usually reserved!" msgstr "" #: network/netconnect.pm:946 standalone/drakTermServ:1852 standalone/drakTermServ:1853 standalone/drakTermServ:1854 #, c-format msgid "" "%s already in use\n" "" msgstr "" #: network/netconnect.pm:986 #, c-format msgid "Choose an ndiswrapper driver" msgstr "" #: network/netconnect.pm:988 #, c-format msgid "Use the ndiswrapper driver %s" msgstr "" #: network/netconnect.pm:988 #, c-format msgid "Install a new driver" msgstr "" #: network/netconnect.pm:1000 #, c-format msgid "Select a device:" msgstr "" #: network/netconnect.pm:1029 #, c-format msgid "Please enter the wireless parameters for this card:" msgstr "" #: network/netconnect.pm:1032 standalone/drakconnect:404 #, c-format msgid "Operating Mode" msgstr "" #: network/netconnect.pm:1033 #, c-format msgid "Ad-hoc" msgstr "" #: network/netconnect.pm:1033 #, c-format msgid "Managed" msgstr "" #: network/netconnect.pm:1033 #, c-format msgid "Master" msgstr "" #: network/netconnect.pm:1033 #, c-format msgid "Repeater" msgstr "" #: network/netconnect.pm:1033 #, c-format msgid "Secondary" msgstr "" #: network/netconnect.pm:1033 #, c-format msgid "Auto" msgstr "" #: network/netconnect.pm:1036 standalone/drakconnect:405 standalone/drakroam:107 #, c-format msgid "Network name (ESSID)" msgstr "" #: network/netconnect.pm:1037 standalone/drakroam:108 #, c-format msgid "Encryption mode" msgstr "" #: network/netconnect.pm:1042 #, c-format msgid "Allow access point roaming" msgstr "" #: network/netconnect.pm:1044 standalone/drakconnect:406 #, c-format msgid "Network ID" msgstr "" #: network/netconnect.pm:1045 standalone/drakconnect:407 #, c-format msgid "Operating frequency" msgstr "" #: network/netconnect.pm:1046 standalone/drakconnect:408 #, c-format msgid "Sensitivity threshold" msgstr "" #: network/netconnect.pm:1047 standalone/drakconnect:409 #, c-format msgid "Bitrate (in b/s)" msgstr "" #: network/netconnect.pm:1048 standalone/drakconnect:420 #, c-format msgid "RTS/CTS" msgstr "" #: network/netconnect.pm:1049 #, c-format msgid "" "RTS/CTS adds a handshake before each packet transmission to make sure that the\n" "channel is clear. This adds overhead, but increase performance in case of hidden\n" "nodes or large number of active nodes. This parameter sets the size of the\n" "smallest packet for which the node sends RTS, a value equal to the maximum\n" "packet size disable the scheme. You may also set this parameter to auto, fixed\n" "or off." msgstr "" #: network/netconnect.pm:1056 standalone/drakconnect:421 #, c-format msgid "Fragmentation" msgstr "" #: network/netconnect.pm:1057 standalone/drakconnect:422 #, c-format msgid "iwconfig command extra arguments" msgstr "" #: network/netconnect.pm:1058 #, c-format msgid "" "Here, one can configure some extra wireless parameters such as:\n" "ap, channel, commit, enc, power, retry, sens, txpower (nick is already set as the hostname).\n" "\n" "See iwconfig(8) man page for further information." msgstr "" #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one #: network/netconnect.pm:1065 standalone/drakconnect:423 #, c-format msgid "iwspy command extra arguments" msgstr "" #: network/netconnect.pm:1066 #, c-format msgid "" "iwspy is used to set a list of addresses in a wireless network\n" "interface and to read back quality of link information for each of those.\n" "\n" "This information is the same as the one available in /proc/net/wireless :\n" "quality of the link, signal strength and noise level.\n" "\n" "See iwpspy(8) man page for further information." msgstr "" #: network/netconnect.pm:1075 standalone/drakconnect:424 #, c-format msgid "iwpriv command extra arguments" msgstr "" #: network/netconnect.pm:1076 #, c-format msgid "" "iwpriv enable to set up optionals (private) parameters of a wireless network\n" "interface.\n" "\n" "iwpriv deals with parameters and setting specific to each driver (as opposed to\n" "iwconfig which deals with generic ones).\n" "\n" "In theory, the documentation of each device driver should indicate how to use\n" "those interface specific commands and their effect.\n" "\n" "See iwpriv(8) man page for further information." msgstr "" #: network/netconnect.pm:1091 #, c-format msgid "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz frequency), or add enough '0' (zeroes)." msgstr "" #: network/netconnect.pm:1095 #, c-format msgid "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add enough '0' (zeroes)." msgstr "" #: network/netconnect.pm:1138 #, c-format msgid "DVB configuration" msgstr "" #: network/netconnect.pm:1139 #, c-format msgid "DVB Adapter" msgstr "" #: network/netconnect.pm:1156 #, c-format msgid "DVB adapter settings" msgstr "" #: network/netconnect.pm:1159 #, c-format msgid "Adapter card" msgstr "" #: network/netconnect.pm:1160 #, c-format msgid "Net demux" msgstr "" #: network/netconnect.pm:1161 #, c-format msgid "PID" msgstr "" #: network/netconnect.pm:1189 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" #: network/netconnect.pm:1194 #, c-format msgid "Last but not least you can also type in your DNS server IP addresses." msgstr "" #: network/netconnect.pm:1196 standalone/drakconnect:991 #, c-format msgid "Host name (optional)" msgstr "" #: network/netconnect.pm:1196 standalone/drakhosts:197 #, c-format msgid "Host name" msgstr "" #: network/netconnect.pm:1198 #, c-format msgid "DNS server 1" msgstr "" #: network/netconnect.pm:1199 #, c-format msgid "DNS server 2" msgstr "" #: network/netconnect.pm:1200 #, c-format msgid "DNS server 3" msgstr "" #: network/netconnect.pm:1201 #, c-format msgid "Search domain" msgstr "" #: network/netconnect.pm:1202 #, c-format msgid "By default search domain will be set from the fully-qualified host name" msgstr "" #: network/netconnect.pm:1203 #, c-format msgid "Gateway (e.g. %s)" msgstr "" #: network/netconnect.pm:1205 #, c-format msgid "Gateway device" msgstr "" #: network/netconnect.pm:1214 #, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "" #: network/netconnect.pm:1219 standalone/drakconnect:685 #, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "" #: network/netconnect.pm:1232 #, c-format msgid "" "If desired, enter a Zeroconf hostname.\n" "This is the name your machine will use to advertise any of\n" "its shared resources that are not managed by the network.\n" "It is not necessary on most networks." msgstr "" #: network/netconnect.pm:1236 #, c-format msgid "Zeroconf Host name" msgstr "" #: network/netconnect.pm:1239 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "" #: network/netconnect.pm:1249 #, c-format msgid "Do you want to allow users to start the connection?" msgstr "" #: network/netconnect.pm:1262 #, c-format msgid "Do you want to start the connection at boot?" msgstr "" #: network/netconnect.pm:1278 #, c-format msgid "Automatically at boot" msgstr "" #: network/netconnect.pm:1280 #, c-format msgid "By using Net Applet in the system tray" msgstr "" #: network/netconnect.pm:1282 #, c-format msgid "Manually (the interface would still be activated at boot)" msgstr "" #: network/netconnect.pm:1291 #, c-format msgid "How do you want to dial this connection?" msgstr "" #: network/netconnect.pm:1304 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "" #: network/netconnect.pm:1312 standalone/drakconnect:1023 #, c-format msgid "Testing your connection..." msgstr "" #: network/netconnect.pm:1332 #, c-format msgid "The system is now connected to the Internet." msgstr "" #: network/netconnect.pm:1333 #, c-format msgid "For security reasons, it will be disconnected now." msgstr "" #: network/netconnect.pm:1334 #, c-format msgid "" "The system does not seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" #: network/netconnect.pm:1349 #, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "\n" "" msgstr "" #: network/netconnect.pm:1352 #, c-format msgid "After this is done, we recommend that you restart your X environment to avoid any hostname-related problems." msgstr "" #: network/netconnect.pm:1353 #, c-format msgid "" "Problems occurred during configuration.\n" "Test your connection via net_monitor or mcc. If your connection does not work, you might want to relaunch the configuration." msgstr "" #: network/netconnect.pm:1364 #, c-format msgid "(detected on port %s)" msgstr "" #. -PO: here, "(detected)" string will be appended to eg "ADSL connection" #: network/netconnect.pm:1366 #, c-format msgid "(detected %s)" msgstr "" #: network/netconnect.pm:1366 #, c-format msgid "(detected)" msgstr "" #: network/netconnect.pm:1367 #, c-format msgid "Network Configuration" msgstr "" #: network/netconnect.pm:1368 #, c-format msgid "" "Because you are doing a network installation, your network is already configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection.\n" "" msgstr "" #: network/netconnect.pm:1371 #, c-format msgid "The network needs to be restarted. Do you want to restart it?" msgstr "" #: network/netconnect.pm:1372 #, c-format msgid "" "A problem occurred while restarting the network: \n" "\n" "%s" msgstr "" #: network/netconnect.pm:1373 #, c-format msgid "" "We are now going to configure the %s connection.\n" "\n" "\n" "Press \"%s\" to continue." msgstr "" #: network/netconnect.pm:1374 #, c-format msgid "Configuration is complete, do you want to apply settings?" msgstr "" #: network/netconnect.pm:1375 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" "" msgstr "" #: network/netconnect.pm:1376 #, c-format msgid "Internet connection" msgstr "" #: network/netconnect.pm:1393 #, c-format msgid "" "An unexpected error has happened:\n" "%s" msgstr "" #: network/network.pm:403 network/network.pm:404 #, c-format msgid "Proxies configuration" msgstr "" #: network/network.pm:405 #, c-format msgid "HTTP proxy" msgstr "" #: network/network.pm:406 #, c-format msgid "FTP proxy" msgstr "" #: network/network.pm:409 #, c-format msgid "Proxy should be http://..." msgstr "" #: network/network.pm:410 #, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "" #: network/shorewall.pm:50 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" "" msgstr "" #: network/thirdparty.pm:218 #, c-format msgid "Copy the Alcatel microcode as mgmt.o in /usr/share/speedtouch/" msgstr "" #: network/thirdparty.pm:227 #, c-format msgid "" "The ECI Hi-Focus modem cannot be supported due to binary driver distribution problem.\n" "\n" "You can find a driver on http://eciadsl.flashtux.org/" msgstr "" #: network/thirdparty.pm:306 #, c-format msgid "Could not install the packages (%s)!" msgstr "" #: network/thirdparty.pm:314 #, c-format msgid "Some packages (%s) are required but aren't available." msgstr "" #: network/thirdparty.pm:315 #, c-format msgid "These packages can be found in Mandriva Club or in Mandriva commercial releases." msgstr "" #: network/thirdparty.pm:317 #, c-format msgid "" "The required files can also be installed from this URL:\n" "%s" msgstr "" #: network/thirdparty.pm:357 #, c-format msgid "Unable to find \"%s\" on your Windows system!" msgstr "" #: network/thirdparty.pm:359 #, c-format msgid "No Windows system has been detected!" msgstr "" #: network/thirdparty.pm:369 #, c-format msgid "Insert floppy" msgstr "" #: network/thirdparty.pm:370 #, c-format msgid "Insert a FAT formatted floppy in drive %s with %s in root directory and press %s" msgstr "" #: network/thirdparty.pm:380 #, c-format msgid "Floppy access error, unable to mount device %s" msgstr "" #: network/thirdparty.pm:390 #, c-format msgid "" "You need the Alcatel microcode.\n" "You can provide it now via a floppy or your windows partition,\n" "or skip and do it later." msgstr "" #: network/thirdparty.pm:394 network/thirdparty.pm:396 #, c-format msgid "Use a floppy" msgstr "" #: network/thirdparty.pm:394 #, c-format msgid "Use my Windows partition" msgstr "" #: network/thirdparty.pm:404 #, c-format msgid "Firmware copy failed, file %s not found" msgstr "" #: network/thirdparty.pm:409 standalone/drakautoinst:250 standalone/drakvpn:888 standalone/scannerdrake:405 #, c-format msgid "Congratulations!" msgstr "" #: network/thirdparty.pm:409 #, c-format msgid "Firmware copy succeeded" msgstr "" #: network/thirdparty.pm:477 #, c-format msgid "Looking for required software and drivers..." msgstr "" #: network/thirdparty.pm:482 #, c-format msgid "Please wait, running device configuration commands..." msgstr "" #: network/wireless.pm:8 #, c-format msgid "Open WEP" msgstr "" #: network/wireless.pm:9 #, c-format msgid "Restricted WEP" msgstr "" #: network/wireless.pm:10 #, c-format msgid "WPA Pre-Shared Key" msgstr "" #: partition_table.pm:391 #, c-format msgid "mount failed: " msgstr "" #: partition_table.pm:496 #, c-format msgid "Extended partition not supported on this platform" msgstr "" #: partition_table.pm:514 #, c-format msgid "" "You have a hole in your partition table but I can not use it.\n" "The only solution is to move your primary partitions to have the hole next to the extended partitions." msgstr "" #: partition_table.pm:605 #, c-format msgid "Restoring from file %s failed: %s" msgstr "" #: partition_table.pm:607 #, c-format msgid "Bad backup file" msgstr "" #: partition_table.pm:627 #, c-format msgid "Error writing to file %s" msgstr "" #: partition_table/raw.pm:253 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted data." msgstr "" #: pkgs.pm:21 #, c-format msgid "must have" msgstr "" #: pkgs.pm:22 #, c-format msgid "important" msgstr "" #: pkgs.pm:23 #, c-format msgid "very nice" msgstr "" #: pkgs.pm:24 #, c-format msgid "nice" msgstr "" #: pkgs.pm:25 #, c-format msgid "maybe" msgstr "" #: pkgs.pm:473 #, c-format msgid "Downloading file %s..." msgstr "" #: printer/cups.pm:105 #, c-format msgid "(on %s)" msgstr "" #: printer/cups.pm:105 #, c-format msgid "(on this machine)" msgstr "" #: printer/cups.pm:117 standalone/printerdrake:200 #, c-format msgid "Configured on other machines" msgstr "" #: printer/cups.pm:119 #, c-format msgid "On CUPS server \"%s\"" msgstr "" #: printer/cups.pm:119 printer/printerdrake.pm:5064 printer/printerdrake.pm:5074 printer/printerdrake.pm:5233 printer/printerdrake.pm:5244 printer/printerdrake.pm:5458 #, c-format msgid " (Default)" msgstr "" #: printer/data.pm:67 #, c-format msgid "PDQ - Print, Do not Queue" msgstr "" #: printer/data.pm:68 #, c-format msgid "PDQ" msgstr "" #: printer/data.pm:80 #, c-format msgid "LPD - Line Printer Daemon" msgstr "" #: printer/data.pm:81 #, c-format msgid "LPD" msgstr "" #: printer/data.pm:102 #, c-format msgid "LPRng - LPR New Generation" msgstr "" #: printer/data.pm:103 #, c-format msgid "LPRng" msgstr "" #: printer/data.pm:128 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "" #: printer/data.pm:158 #, c-format msgid "CUPS - Common Unix Printing System (remote server)" msgstr "" #: printer/data.pm:159 #, c-format msgid "Remote CUPS" msgstr "" #: printer/detect.pm:166 printer/detect.pm:250 printer/detect.pm:485 printer/detect.pm:558 #, c-format msgid "Unknown Model" msgstr "" #: printer/main.pm:27 #, c-format msgid "Local printer" msgstr "" #: printer/main.pm:28 #, c-format msgid "Remote printer" msgstr "" #: printer/main.pm:29 #, c-format msgid "Printer on remote CUPS server" msgstr "" #: printer/main.pm:30 printer/printerdrake.pm:1373 printer/printerdrake.pm:1920 #, c-format msgid "Printer on remote lpd server" msgstr "" #: printer/main.pm:31 #, c-format msgid "Network printer (TCP/Socket)" msgstr "" #: printer/main.pm:32 #, c-format msgid "Printer on SMB/Windows server" msgstr "" #: printer/main.pm:33 #, c-format msgid "Printer on NetWare server" msgstr "" #: printer/main.pm:34 printer/printerdrake.pm:1924 #, c-format msgid "Enter a printer device URI" msgstr "" #: printer/main.pm:35 #, c-format msgid "Pipe job into a command" msgstr "" #: printer/main.pm:46 #, c-format msgid "recommended" msgstr "" #: printer/main.pm:330 printer/main.pm:690 printer/main.pm:1808 printer/main.pm:2981 printer/main.pm:2990 printer/printerdrake.pm:973 printer/printerdrake.pm:1133 printer/printerdrake.pm:2408 printer/printerdrake.pm:5495 #, c-format msgid "Unknown model" msgstr "" #: printer/main.pm:355 standalone/printerdrake:199 #, c-format msgid "Configured on this machine" msgstr "" #: printer/main.pm:361 printer/printerdrake.pm:1463 #, c-format msgid " on parallel port #%s" msgstr "" #: printer/main.pm:364 printer/printerdrake.pm:1466 #, c-format msgid ", USB printer #%s" msgstr "" #: printer/main.pm:366 #, c-format msgid ", USB printer" msgstr "" #: printer/main.pm:370 #, c-format msgid ", HP printer on a parallel port" msgstr "" #: printer/main.pm:372 #, c-format msgid ", HP printer on USB" msgstr "" #: printer/main.pm:374 #, c-format msgid ", HP printer on HP JetDirect" msgstr "" #: printer/main.pm:376 #, c-format msgid ", HP printer" msgstr "" #: printer/main.pm:382 #, c-format msgid ", multi-function device on parallel port #%s" msgstr "" #: printer/main.pm:385 #, c-format msgid ", multi-function device on a parallel port" msgstr "" #: printer/main.pm:387 #, c-format msgid ", multi-function device on USB" msgstr "" #: printer/main.pm:389 #, c-format msgid ", multi-function device on HP JetDirect" msgstr "" #: printer/main.pm:391 #, c-format msgid ", multi-function device" msgstr "" #: printer/main.pm:395 #, c-format msgid ", printing to %s" msgstr "" #: printer/main.pm:398 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr "" #: printer/main.pm:401 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr "" #: printer/main.pm:406 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "" #: printer/main.pm:411 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr "" #: printer/main.pm:414 #, c-format msgid ", using command %s" msgstr "" #: printer/main.pm:429 #, c-format msgid "Parallel port #%s" msgstr "" #: printer/main.pm:432 printer/printerdrake.pm:1484 printer/printerdrake.pm:1511 printer/printerdrake.pm:1529 #, c-format msgid "USB printer #%s" msgstr "" #: printer/main.pm:434 #, c-format msgid "USB printer" msgstr "" #: printer/main.pm:438 #, c-format msgid "HP printer on a parallel port" msgstr "" #: printer/main.pm:440 #, c-format msgid "HP printer on USB" msgstr "" #: printer/main.pm:442 #, c-format msgid "HP printer on HP JetDirect" msgstr "" #: printer/main.pm:444 #, c-format msgid "HP printer" msgstr "" #: printer/main.pm:450 #, c-format msgid "Multi-function device on parallel port #%s" msgstr "" #: printer/main.pm:453 #, c-format msgid "Multi-function device on a parallel port" msgstr "" #: printer/main.pm:455 #, c-format msgid "Multi-function device on USB" msgstr "" #: printer/main.pm:457 #, c-format msgid "Multi-function device on HP JetDirect" msgstr "" #: printer/main.pm:459 #, c-format msgid "Multi-function device" msgstr "" #: printer/main.pm:463 #, c-format msgid "Prints into %s" msgstr "" #: printer/main.pm:466 #, c-format msgid "LPD server \"%s\", printer \"%s\"" msgstr "" #: printer/main.pm:469 #, c-format msgid "TCP/IP host \"%s\", port %s" msgstr "" #: printer/main.pm:474 #, c-format msgid "SMB/Windows server \"%s\", share \"%s\"" msgstr "" #: printer/main.pm:479 #, c-format msgid "Novell server \"%s\", printer \"%s\"" msgstr "" #: printer/main.pm:482 #, c-format msgid "Uses command %s" msgstr "" #: printer/main.pm:484 #, c-format msgid "URI: %s" msgstr "" #: printer/main.pm:687 printer/printerdrake.pm:1060 printer/printerdrake.pm:3232 #, c-format msgid "Raw printer (No driver)" msgstr "" #: printer/main.pm:1307 printer/printerdrake.pm:211 printer/printerdrake.pm:223 #, c-format msgid "Local network(s)" msgstr "" #: printer/main.pm:1309 printer/printerdrake.pm:227 #, c-format msgid "Interface \"%s\"" msgstr "" #: printer/main.pm:1311 #, c-format msgid "Network %s" msgstr "" #: printer/main.pm:1313 #, c-format msgid "Host %s" msgstr "" #: printer/main.pm:1342 #, c-format msgid "%s (Port %s)" msgstr "" #: printer/printerdrake.pm:24 #, c-format msgid "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned on. Download the Windows driver package from the HP web site (the firmware on the printer's CD does not work) and extract the firmware file from it by decompressing the self-extracting '.exe' file with the 'unzip' utility and searching for the 'sihp1000.img' file. Copy this file into the '/etc/printer' directory. There it will be found by the automatic uploader script and uploaded whenever the printer is connected and turned on.\n" "" msgstr "" #: printer/printerdrake.pm:67 #, c-format msgid "CUPS printer configuration" msgstr "" #: printer/printerdrake.pm:68 #, c-format msgid "Here you can choose whether the printers connected to this machine should be accessible by remote machines and by which remote machines." msgstr "" #: printer/printerdrake.pm:69 #, c-format msgid "You can also decide here whether printers on remote machines should be automatically made available on this machine." msgstr "" #: printer/printerdrake.pm:72 #, c-format msgid "The printers on this machine are available to other computers" msgstr "" #: printer/printerdrake.pm:77 #, c-format msgid "Automatically find available printers on remote machines" msgstr "" #: printer/printerdrake.pm:82 #, c-format msgid "Printer sharing on hosts/networks: " msgstr "" #: printer/printerdrake.pm:84 #, c-format msgid "Custom configuration" msgstr "" #: printer/printerdrake.pm:89 standalone/scannerdrake:593 standalone/scannerdrake:610 #, c-format msgid "No remote machines" msgstr "" #: printer/printerdrake.pm:100 #, c-format msgid "Additional CUPS servers: " msgstr "" #: printer/printerdrake.pm:107 #, c-format msgid "To get access to printers on remote CUPS servers in your local network you only need to turn on the \"Automatically find available printers on remote machines\" option; the CUPS servers inform your machine automatically about their printers. All printers currently known to your machine are listed in the \"Remote printers\" section in the main window of Printerdrake. If your CUPS server(s) is/are not in your local network, you have to enter the IP address(es) and optionally the port number(s) here to get the printer information from the server(s)." msgstr "" #: printer/printerdrake.pm:115 #, c-format msgid "Japanese text printing mode" msgstr "" #: printer/printerdrake.pm:116 #, c-format msgid "Turning on this allows to print plain text files in Japanese language. Only use this function if you really want to print text in Japanese, if it is activated you cannot print accentuated characters in latin fonts any more and you will not be able to adjust the margins, the character size, etc. This setting only affects printers defined on this machine. If you want to print Japanese text on a printer set up on a remote machine, you have to activate this function on that remote machine." msgstr "" #: printer/printerdrake.pm:123 #, c-format msgid "Automatic correction of CUPS configuration" msgstr "" #: printer/printerdrake.pm:125 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, but then you have to take care of these points." msgstr "" #: printer/printerdrake.pm:138 printer/printerdrake.pm:506 printer/printerdrake.pm:4697 #, c-format msgid "Remote CUPS server and no local CUPS daemon" msgstr "" #: printer/printerdrake.pm:141 #, c-format msgid "On" msgstr "" #: printer/printerdrake.pm:143 printer/printerdrake.pm:498 printer/printerdrake.pm:525 #, c-format msgid "Off" msgstr "" #: printer/printerdrake.pm:144 printer/printerdrake.pm:507 #, c-format msgid "In this mode the local CUPS daemon will be stopped and all printing requests go directly to the server specified below. Note that it is not possible to define local print queues then and if the specified server is down it cannot be printed at all from this machine." msgstr "" #: printer/printerdrake.pm:161 printer/printerdrake.pm:236 #, c-format msgid "Sharing of local printers" msgstr "" #: printer/printerdrake.pm:162 #, c-format msgid "These are the machines and networks on which the locally connected printer(s) should be available:" msgstr "" #: printer/printerdrake.pm:173 #, c-format msgid "Add host/network" msgstr "" #: printer/printerdrake.pm:179 #, c-format msgid "Edit selected host/network" msgstr "" #: printer/printerdrake.pm:188 #, c-format msgid "Remove selected host/network" msgstr "" #: printer/printerdrake.pm:219 printer/printerdrake.pm:229 printer/printerdrake.pm:241 printer/printerdrake.pm:248 printer/printerdrake.pm:279 printer/printerdrake.pm:297 #, c-format msgid "IP address of host/network:" msgstr "" #: printer/printerdrake.pm:237 #, c-format msgid "Choose the network or host on which the local printers should be made available:" msgstr "" #: printer/printerdrake.pm:244 #, c-format msgid "Host/network IP address missing." msgstr "" #: printer/printerdrake.pm:252 #, c-format msgid "" "The entered host/network IP is not correct.\n" "" msgstr "" #: printer/printerdrake.pm:253 printer/printerdrake.pm:429 #, c-format msgid "" "Examples for correct IPs:\n" "" msgstr "" #: printer/printerdrake.pm:277 #, c-format msgid "" "This host/network is already in the list, it cannot be added again.\n" "" msgstr "" #: printer/printerdrake.pm:346 printer/printerdrake.pm:416 #, c-format msgid "Accessing printers on remote CUPS servers" msgstr "" #: printer/printerdrake.pm:347 #, c-format msgid "Add here the CUPS servers whose printers you want to use. You only need to do this if the servers do not broadcast their printer information into the local network." msgstr "" #: printer/printerdrake.pm:358 #, c-format msgid "Add server" msgstr "" #: printer/printerdrake.pm:364 #, c-format msgid "Edit selected server" msgstr "" #: printer/printerdrake.pm:373 #, c-format msgid "Remove selected server" msgstr "" #: printer/printerdrake.pm:417 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "" #: printer/printerdrake.pm:418 #, c-format msgid "If no port is given, 631 will be taken as default." msgstr "" #: printer/printerdrake.pm:422 #, c-format msgid "Server IP missing!" msgstr "" #: printer/printerdrake.pm:428 #, c-format msgid "" "The entered IP is not correct.\n" "" msgstr "" #: printer/printerdrake.pm:440 printer/printerdrake.pm:2154 #, c-format msgid "The port number should be an integer!" msgstr "" #: printer/printerdrake.pm:451 #, c-format msgid "" "This server is already in the list, it cannot be added again.\n" "" msgstr "" #: printer/printerdrake.pm:462 printer/printerdrake.pm:2181 standalone/drakups:251 standalone/harddrake2:52 #, c-format msgid "Port" msgstr "" #: printer/printerdrake.pm:495 printer/printerdrake.pm:511 printer/printerdrake.pm:526 printer/printerdrake.pm:530 printer/printerdrake.pm:536 #, c-format msgid "On, Name or IP of remote server:" msgstr "" #: printer/printerdrake.pm:514 printer/printerdrake.pm:4706 printer/printerdrake.pm:4772 #, c-format msgid "CUPS server name or IP address missing." msgstr "" #: printer/printerdrake.pm:566 printer/printerdrake.pm:586 printer/printerdrake.pm:811 printer/printerdrake.pm:880 printer/printerdrake.pm:901 printer/printerdrake.pm:927 printer/printerdrake.pm:1036 printer/printerdrake.pm:1078 printer/printerdrake.pm:1088 printer/printerdrake.pm:1123 printer/printerdrake.pm:2241 printer/printerdrake.pm:2456 printer/printerdrake.pm:2488 printer/printerdrake.pm:2550 printer/printerdrake.pm:2602 printer/printerdrake.pm:2619 printer/printerdrake.pm:2663 printer/printerdrake.pm:2703 printer/printerdrake.pm:2753 printer/printerdrake.pm:2790 printer/printerdrake.pm:2801 printer/printerdrake.pm:3074 printer/printerdrake.pm:3079 printer/printerdrake.pm:3227 printer/printerdrake.pm:3338 printer/printerdrake.pm:3951 printer/printerdrake.pm:4018 printer/printerdrake.pm:4067 printer/printerdrake.pm:4070 printer/printerdrake.pm:4202 printer/printerdrake.pm:4303 printer/printerdrake.pm:4375 printer/printerdrake.pm:4396 printer/printerdrake.pm:4406 printer/printerdrake.pm:4497 printer/printerdrake.pm:4592 printer/printerdrake.pm:4598 printer/printerdrake.pm:4626 printer/printerdrake.pm:4733 printer/printerdrake.pm:4842 printer/printerdrake.pm:4862 printer/printerdrake.pm:4871 printer/printerdrake.pm:4886 printer/printerdrake.pm:5087 printer/printerdrake.pm:5564 printer/printerdrake.pm:5647 standalone/printerdrake:75 standalone/printerdrake:590 #, c-format msgid "Printerdrake" msgstr "" #: printer/printerdrake.pm:567 printer/printerdrake.pm:4304 printer/printerdrake.pm:4843 #, c-format msgid "Reading printer data..." msgstr "" #: printer/printerdrake.pm:587 #, c-format msgid "Restarting CUPS..." msgstr "" #: printer/printerdrake.pm:614 #, c-format msgid "Allow pop-up windows, printer setup and package installation may be canceled" msgstr "" #: printer/printerdrake.pm:616 #, c-format msgid "No pop-up windows, printer setup and package installation cannot be canceled" msgstr "" #: printer/printerdrake.pm:622 #, c-format msgid "Printer auto administration" msgstr "" #: printer/printerdrake.pm:623 #, c-format msgid "Here you can configure printer administration tasks which should be done automatically." msgstr "" #: printer/printerdrake.pm:626 #, c-format msgid "Do automatic configuration of new printers" msgstr "" #: printer/printerdrake.pm:627 printer/printerdrake.pm:641 #, c-format msgid "when a USB printer is connected and turned on" msgstr "" #: printer/printerdrake.pm:630 #, c-format msgid "when Printerdrake is started" msgstr "" #: printer/printerdrake.pm:634 #, c-format msgid "Mode for automatic printer setup:" msgstr "" #: printer/printerdrake.pm:640 #, c-format msgid "Re-enable disabled printers" msgstr "" #: printer/printerdrake.pm:644 #, c-format msgid "when the printing system is started" msgstr "" #: printer/printerdrake.pm:680 #, c-format msgid "Communication error handling for the printer \"%s\"" msgstr "" #: printer/printerdrake.pm:682 #, c-format msgid "Here you can configure how errors during the communication between your computer and the printer \"%s\" should be handled (for example if the printer is not turned on)." msgstr "" #: printer/printerdrake.pm:686 #, c-format msgid "The number of retries should be an integer number of at least 1!" msgstr "" #: printer/printerdrake.pm:690 #, c-format msgid "The delay between retries should be a positive integer number!" msgstr "" #: printer/printerdrake.pm:701 #, c-format msgid "Do not disable the printer" msgstr "" #: printer/printerdrake.pm:704 #, c-format msgid "Retry infinitely often" msgstr "" #: printer/printerdrake.pm:707 #, c-format msgid "Number of retries" msgstr "" #: printer/printerdrake.pm:712 #, c-format msgid "Delay between retries (in sec)" msgstr "" #: printer/printerdrake.pm:745 printer/printerdrake.pm:765 #, c-format msgid "Select Printer Connection" msgstr "" #: printer/printerdrake.pm:746 #, c-format msgid "How is the printer connected?" msgstr "" #: printer/printerdrake.pm:748 #, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these printers will be automatically detected." msgstr "" #: printer/printerdrake.pm:751 printer/printerdrake.pm:5089 #, c-format msgid "" "\n" "WARNING: No local network connection active, remote printers can neither be detected nor tested!" msgstr "" #: printer/printerdrake.pm:758 #, c-format msgid "Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)" msgstr "" #: printer/printerdrake.pm:760 #, c-format msgid "Modify timeout for network printer auto-detection" msgstr "" #: printer/printerdrake.pm:766 #, c-format msgid "Enter the timeout for network printer auto-detection (in msec) here. " msgstr "" #: printer/printerdrake.pm:768 #, c-format msgid "The longer you choose the timeout, the more reliable the detections of network printers will be, but the scan can take longer then, especially if there are many machines with local firewalls in the network. " msgstr "" #: printer/printerdrake.pm:772 #, c-format msgid "The timeout must be a positive integer number!" msgstr "" #: printer/printerdrake.pm:811 #, c-format msgid "Checking your system..." msgstr "" #: printer/printerdrake.pm:829 #, c-format msgid "and one unknown printer" msgstr "" #: printer/printerdrake.pm:831 #, c-format msgid "and %d unknown printers" msgstr "" #: printer/printerdrake.pm:835 #, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" #: printer/printerdrake.pm:837 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" #: printer/printerdrake.pm:838 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "" #: printer/printerdrake.pm:842 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" #: printer/printerdrake.pm:843 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" #: printer/printerdrake.pm:846 #, c-format msgid "There are no printers found which are directly connected to your machine" msgstr "" #: printer/printerdrake.pm:849 #, c-format msgid "" " (Make sure that all your printers are connected and turned on).\n" "" msgstr "" #: printer/printerdrake.pm:862 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on printers in the local network?\n" "" msgstr "" #: printer/printerdrake.pm:863 #, c-format msgid "" "Do you want to enable printing on printers in the local network?\n" "" msgstr "" #: printer/printerdrake.pm:865 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above?\n" "" msgstr "" #: printer/printerdrake.pm:866 #, c-format msgid "" "Are you sure that you want to set up printing on this machine?\n" "" msgstr "" #: printer/printerdrake.pm:867 #, c-format msgid "NOTE: Depending on the printer model and the printing system up to %d MB of additional software will be installed." msgstr "" #: printer/printerdrake.pm:884 #, c-format msgid "Do not setup printer automatically now, and never do it again" msgstr "" #: printer/printerdrake.pm:928 #, c-format msgid "Searching for new printers..." msgstr "" #: printer/printerdrake.pm:989 #, c-format msgid "Do not setup printer automatically again" msgstr "" #: printer/printerdrake.pm:996 #, c-format msgid "New printers found" msgstr "" #: printer/printerdrake.pm:997 #, c-format msgid "New printer found" msgstr "" #: printer/printerdrake.pm:999 #, c-format msgid "" "The following new printers were found and Printerdrake can automatically set them up for you. If you do not want to have all of them set up, unselect the ones which should be skipped, or click \"Cancel\" to set up none of them.\n" "" msgstr "" #: printer/printerdrake.pm:1000 #, c-format msgid "" "The following new printer was found and printerdrake can automatically set it up for you. If you do not want to have it set up, unselect it, or click \"Cancel\".\n" "" msgstr "" #: printer/printerdrake.pm:1001 #, c-format msgid "" "Note that for certain printer models additional packages need to be installed. So keep your installation media handy.\n" "" msgstr "" #: printer/printerdrake.pm:1037 printer/printerdrake.pm:1079 #, c-format msgid "Configuring printer on %s..." msgstr "" #: printer/printerdrake.pm:1062 #, c-format msgid "(" msgstr "" #: printer/printerdrake.pm:1063 #, c-format msgid " on " msgstr "" #: printer/printerdrake.pm:1064 standalone/scannerdrake:137 #, c-format msgid ")" msgstr "" #: printer/printerdrake.pm:1069 printer/printerdrake.pm:3239 #, c-format msgid "Printer model selection" msgstr "" #: printer/printerdrake.pm:1070 printer/printerdrake.pm:3240 #, c-format msgid "Which printer model do you have?" msgstr "" #: printer/printerdrake.pm:1071 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please choose the correct model from the list." msgstr "" #: printer/printerdrake.pm:1074 printer/printerdrake.pm:3245 #, c-format msgid "If your printer is not listed, choose a compatible (see printer manual) or a similar one." msgstr "" #: printer/printerdrake.pm:1089 printer/printerdrake.pm:4863 #, c-format msgid "Configuring printer \"%s\"..." msgstr "" #: printer/printerdrake.pm:1124 #, c-format msgid "" "Now you have turned off automatic printer setup.\n" "\n" "" msgstr "" #: printer/printerdrake.pm:1125 #, c-format msgid "You can turn it back on again by choosing \"%s\" -> \"%s\" in Printerdrake's main menu. " msgstr "" #: printer/printerdrake.pm:1125 printer/printerdrake.pm:5139 #, c-format msgid "Configure Auto Administration" msgstr "" #: printer/printerdrake.pm:1126 #, c-format msgid "There you can also choose in which situation automatic printer setup is done (On Printerdrake startup, on printing system startup, when connecting a new USB printer)." msgstr "" #: printer/printerdrake.pm:1274 printer/printerdrake.pm:1286 printer/printerdrake.pm:1393 printer/printerdrake.pm:2422 printer/printerdrake.pm:2437 printer/printerdrake.pm:2509 printer/printerdrake.pm:5106 printer/printerdrake.pm:5293 #, c-format msgid "Add a new printer" msgstr "" #: printer/printerdrake.pm:1275 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives you access to all available printer drivers, driver options, and printer connection types." msgstr "" #: printer/printerdrake.pm:1288 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this computer, connected directly to the network or to a remote Windows machine.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected. Also your network printer(s) and your Windows machines must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network and/or Windows-hosted printers when you do not need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now." msgstr "" #: printer/printerdrake.pm:1297 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this computer.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now." msgstr "" #: printer/printerdrake.pm:1305 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. Also your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network printers when you do not need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now." msgstr "" #: printer/printerdrake.pm:1314 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now." msgstr "" #: printer/printerdrake.pm:1365 #, c-format msgid "Auto-detect printers connected to this machine" msgstr "" #: printer/printerdrake.pm:1368 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "" #: printer/printerdrake.pm:1371 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" #: printer/printerdrake.pm:1374 #, c-format msgid "No auto-detection" msgstr "" #: printer/printerdrake.pm:1394 #, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select \"Printer\" in the \"Hardware\" section of the %s Control Center." msgstr "" #: printer/printerdrake.pm:1430 printer/printerdrake.pm:1662 printer/printerdrake.pm:1725 printer/printerdrake.pm:1817 printer/printerdrake.pm:1955 printer/printerdrake.pm:2031 printer/printerdrake.pm:2198 printer/printerdrake.pm:2291 printer/printerdrake.pm:2300 printer/printerdrake.pm:2309 printer/printerdrake.pm:2320 printer/printerdrake.pm:2462 printer/printerdrake.pm:2562 printer/printerdrake.pm:2608 printer/printerdrake.pm:2675 printer/printerdrake.pm:2710 #, c-format msgid "Could not install the %s packages!" msgstr "" #: printer/printerdrake.pm:1432 #, c-format msgid "Skipping Windows/SMB server auto-detection" msgstr "" #: printer/printerdrake.pm:1438 printer/printerdrake.pm:1585 printer/printerdrake.pm:1823 printer/printerdrake.pm:2085 #, c-format msgid "Printer auto-detection" msgstr "" #: printer/printerdrake.pm:1438 #, c-format msgid "Detecting devices..." msgstr "" #: printer/printerdrake.pm:1469 #, c-format msgid ", network printer \"%s\", port %s" msgstr "" #: printer/printerdrake.pm:1472 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr "" #: printer/printerdrake.pm:1476 #, c-format msgid "Detected %s" msgstr "" #: printer/printerdrake.pm:1481 printer/printerdrake.pm:1508 printer/printerdrake.pm:1526 #, c-format msgid "Printer on parallel port #%s" msgstr "" #: printer/printerdrake.pm:1487 #, c-format msgid "Network printer \"%s\", port %s" msgstr "" #: printer/printerdrake.pm:1490 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "" #: printer/printerdrake.pm:1571 #, c-format msgid "Local Printer" msgstr "" #: printer/printerdrake.pm:1572 #, c-format msgid "No local printer found! To manually install a printer enter a device name/file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" #: printer/printerdrake.pm:1576 #, c-format msgid "You must enter a device or file name!" msgstr "" #: printer/printerdrake.pm:1586 #, c-format msgid "No printer found!" msgstr "" #: printer/printerdrake.pm:1594 #, c-format msgid "Local Printers" msgstr "" #: printer/printerdrake.pm:1595 #, c-format msgid "Available printers" msgstr "" #: printer/printerdrake.pm:1599 printer/printerdrake.pm:1608 #, c-format msgid "The following printer was auto-detected. " msgstr "" #: printer/printerdrake.pm:1601 #, c-format msgid "If it is not the one you want to configure, enter a device name/file name in the input line" msgstr "" #: printer/printerdrake.pm:1602 #, c-format msgid "Alternatively, you can specify a device name/file name in the input line" msgstr "" #: printer/printerdrake.pm:1603 printer/printerdrake.pm:1612 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "" #: printer/printerdrake.pm:1605 #, c-format msgid "Please choose the printer you want to set up or enter a device name/file name in the input line" msgstr "" #: printer/printerdrake.pm:1606 #, c-format msgid "Please choose the printer to which the print jobs should go or enter a device name/file name in the input line" msgstr "" #: printer/printerdrake.pm:1610 #, c-format msgid "The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\"." msgstr "" #: printer/printerdrake.pm:1611 #, c-format msgid "Currently, no alternative possibility is available" msgstr "" #: printer/printerdrake.pm:1614 #, c-format msgid "Please choose the printer you want to set up. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\"." msgstr "" #: printer/printerdrake.pm:1615 #, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "" #: printer/printerdrake.pm:1617 #, c-format msgid "Please choose the port that your printer is connected to or enter a device name/file name in the input line" msgstr "" #: printer/printerdrake.pm:1618 #, c-format msgid "Please choose the port that your printer is connected to." msgstr "" #: printer/printerdrake.pm:1620 #, c-format msgid " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" #: printer/printerdrake.pm:1624 #, c-format msgid "You must choose/enter a printer/device!" msgstr "" #: printer/printerdrake.pm:1664 printer/printerdrake.pm:1727 printer/printerdrake.pm:1819 printer/printerdrake.pm:1957 printer/printerdrake.pm:2033 printer/printerdrake.pm:2200 printer/printerdrake.pm:2293 printer/printerdrake.pm:2302 printer/printerdrake.pm:2311 printer/printerdrake.pm:2322 #, c-format msgid "Aborting" msgstr "" #: printer/printerdrake.pm:1700 #, c-format msgid "Remote lpd Printer Options" msgstr "" #: printer/printerdrake.pm:1701 #, c-format msgid "To use a remote lpd printer, you need to supply the hostname of the printer server and the printer name on that server." msgstr "" #: printer/printerdrake.pm:1702 #, c-format msgid "Remote host name" msgstr "" #: printer/printerdrake.pm:1703 #, c-format msgid "Remote printer name" msgstr "" #: printer/printerdrake.pm:1706 #, c-format msgid "Remote host name missing!" msgstr "" #: printer/printerdrake.pm:1710 #, c-format msgid "Remote printer name missing!" msgstr "" #: printer/printerdrake.pm:1740 printer/printerdrake.pm:2216 printer/printerdrake.pm:2341 standalone/drakTermServ:447 standalone/drakTermServ:769 standalone/drakTermServ:785 standalone/drakTermServ:1590 standalone/drakTermServ:1599 standalone/drakTermServ:1611 standalone/drakbackup:499 standalone/drakbackup:605 standalone/drakbackup:640 standalone/drakbackup:741 standalone/draknfs:203 standalone/draksambashare:623 standalone/draksambashare:790 standalone/harddrake2:259 #, c-format msgid "Information" msgstr "" #: printer/printerdrake.pm:1740 printer/printerdrake.pm:2216 printer/printerdrake.pm:2341 #, c-format msgid "Detected model: %s %s" msgstr "" #: printer/printerdrake.pm:1823 printer/printerdrake.pm:2085 #, c-format msgid "Scanning network..." msgstr "" #: printer/printerdrake.pm:1835 printer/printerdrake.pm:1856 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr "" #: printer/printerdrake.pm:1838 printer/printerdrake.pm:1859 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "" #: printer/printerdrake.pm:1880 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "" #: printer/printerdrake.pm:1881 #, c-format msgid "To print to a SMB printer, you need to provide the SMB host name (Note! It may be different from its TCP/IP hostname!) and possibly the IP address of the print server, as well as the share name for the printer you wish to access and any applicable user name, password, and workgroup information." msgstr "" #: printer/printerdrake.pm:1882 #, c-format msgid " If the desired printer was auto-detected, simply choose it from the list and then add user name, password, and/or workgroup if needed." msgstr "" #: printer/printerdrake.pm:1884 #, c-format msgid "SMB server host" msgstr "" #: printer/printerdrake.pm:1885 #, c-format msgid "SMB server IP" msgstr "" #: printer/printerdrake.pm:1886 standalone/draksambashare:61 #, c-format msgid "Share name" msgstr "" #: printer/printerdrake.pm:1889 #, c-format msgid "Workgroup" msgstr "" #: printer/printerdrake.pm:1891 #, c-format msgid "Auto-detected" msgstr "" #: printer/printerdrake.pm:1901 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "" #: printer/printerdrake.pm:1905 #, c-format msgid "Samba share name missing!" msgstr "" #: printer/printerdrake.pm:1911 #, c-format msgid "SECURITY WARNING!" msgstr "" #: printer/printerdrake.pm:1912 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as \"ps auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the \"%s\" connection type in Printerdrake.\n" "\n" "" msgstr "" #: printer/printerdrake.pm:1922 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the \"%s\" connection type in Printerdrake.\n" "\n" "" msgstr "" #: printer/printerdrake.pm:1925 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" #: printer/printerdrake.pm:2004 #, c-format msgid "NetWare Printer Options" msgstr "" #: printer/printerdrake.pm:2005 #, c-format msgid "To print on a NetWare printer, you need to provide the NetWare print server name (Note! it may be different from its TCP/IP hostname!) as well as the print queue name for the printer you wish to access and any applicable user name and password." msgstr "" #: printer/printerdrake.pm:2006 #, c-format msgid "Printer Server" msgstr "" #: printer/printerdrake.pm:2007 #, c-format msgid "Print Queue Name" msgstr "" #: printer/printerdrake.pm:2012 #, c-format msgid "NCP server name missing!" msgstr "" #: printer/printerdrake.pm:2016 #, c-format msgid "NCP queue name missing!" msgstr "" #: printer/printerdrake.pm:2097 printer/printerdrake.pm:2118 #, c-format msgid ", host \"%s\", port %s" msgstr "" #: printer/printerdrake.pm:2100 printer/printerdrake.pm:2121 #, c-format msgid "Host \"%s\", port %s" msgstr "" #: printer/printerdrake.pm:2143 #, c-format msgid "TCP/Socket Printer Options" msgstr "" #: printer/printerdrake.pm:2145 #, c-format msgid "Choose one of the auto-detected printers from the list or enter the hostname or IP and the optional port number (default is 9100) in the input fields." msgstr "" #: printer/printerdrake.pm:2146 #, c-format msgid "To print to a TCP or socket printer, you need to provide the host name or IP of the printer and optionally the port number (default is 9100). On HP JetDirect servers the port number is usually 9100, on other servers it can vary. See the manual of your hardware." msgstr "" #: printer/printerdrake.pm:2150 #, c-format msgid "Printer host name or IP missing!" msgstr "" #: printer/printerdrake.pm:2179 #, c-format msgid "Printer host name or IP" msgstr "" #: printer/printerdrake.pm:2242 #, c-format msgid "Refreshing Device URI list..." msgstr "" #: printer/printerdrake.pm:2245 printer/printerdrake.pm:2247 #, c-format msgid "Printer Device URI" msgstr "" #: printer/printerdrake.pm:2246 #, c-format msgid "You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers." msgstr "" #: printer/printerdrake.pm:2272 #, c-format msgid "A valid URI must be entered!" msgstr "" #: printer/printerdrake.pm:2377 #, c-format msgid "Pipe into command" msgstr "" #: printer/printerdrake.pm:2378 #, c-format msgid "Here you can specify any arbitrary command line into which the job should be piped instead of being sent directly to a printer." msgstr "" #: printer/printerdrake.pm:2379 #, c-format msgid "Command line" msgstr "" #: printer/printerdrake.pm:2383 #, c-format msgid "A command line must be entered!" msgstr "" #: printer/printerdrake.pm:2423 #, c-format msgid "On many HP printers there are special functions available, maintenance (ink level checking, nozzle cleaning. head alignment, ...) on all not too old inkjets, scanning on multi-function devices, and memory card access on printers with card readers. " msgstr "" #: printer/printerdrake.pm:2425 #, c-format msgid "To access these extra functions on your HP printer, it must be set up with the appropriate software: " msgstr "" #: printer/printerdrake.pm:2426 #, c-format msgid "Either with the newer HPLIP which allows printer maintenance through the easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on newer PhotoSmart models " msgstr "" #: printer/printerdrake.pm:2427 #, c-format msgid "or with the older HPOJ which allows only scanner and memory card access, but could help you in case of failure of HPLIP. " msgstr "" #: printer/printerdrake.pm:2429 #, c-format msgid "What is your choice (choose \"None\" for non-HP printers)? " msgstr "" #: printer/printerdrake.pm:2430 printer/printerdrake.pm:2431 printer/printerdrake.pm:2457 printer/printerdrake.pm:2463 printer/printerdrake.pm:2489 #, c-format msgid "HPLIP" msgstr "" #: printer/printerdrake.pm:2430 printer/printerdrake.pm:2433 printer/printerdrake.pm:2603 printer/printerdrake.pm:2609 printer/printerdrake.pm:2620 #, c-format msgid "HPOJ" msgstr "" #: printer/printerdrake.pm:2438 #, c-format msgid "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?" msgstr "" #: printer/printerdrake.pm:2457 printer/printerdrake.pm:2603 #, c-format msgid "Installing %s package..." msgstr "" #: printer/printerdrake.pm:2464 printer/printerdrake.pm:2610 #, c-format msgid "Only printing will be possible on the %s." msgstr "" #: printer/printerdrake.pm:2479 #, c-format msgid "Could not remove your old HPOJ configuration file %s for your %s! " msgstr "" #: printer/printerdrake.pm:2481 #, c-format msgid "Please remove the file manually and restart HPOJ." msgstr "" #: printer/printerdrake.pm:2489 printer/printerdrake.pm:2620 #, c-format msgid "Checking device and configuring %s..." msgstr "" #: printer/printerdrake.pm:2510 #, c-format msgid "Which printer do you want to set up with HPLIP?" msgstr "" #: printer/printerdrake.pm:2551 printer/printerdrake.pm:2664 #, c-format msgid "Installing SANE packages..." msgstr "" #: printer/printerdrake.pm:2564 printer/printerdrake.pm:2677 #, c-format msgid "Scanning on the %s will not be possible." msgstr "" #: printer/printerdrake.pm:2579 #, c-format msgid "Using and Maintaining your %s" msgstr "" #: printer/printerdrake.pm:2704 #, c-format msgid "Installing mtools packages..." msgstr "" #: printer/printerdrake.pm:2712 #, c-format msgid "Photo memory card access on the %s will not be possible." msgstr "" #: printer/printerdrake.pm:2728 #, c-format msgid "Scanning on your HP multi-function device" msgstr "" #: printer/printerdrake.pm:2737 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "" #: printer/printerdrake.pm:2754 #, c-format msgid "Configuring device..." msgstr "" #: printer/printerdrake.pm:2791 #, c-format msgid "Making printer port available for CUPS..." msgstr "" #: printer/printerdrake.pm:2801 printer/printerdrake.pm:3075 printer/printerdrake.pm:3228 #, c-format msgid "Reading printer database..." msgstr "" #: printer/printerdrake.pm:3033 #, c-format msgid "Enter Printer Name and Comments" msgstr "" #: printer/printerdrake.pm:3037 printer/printerdrake.pm:4360 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "" #: printer/printerdrake.pm:3043 printer/printerdrake.pm:4365 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" #: printer/printerdrake.pm:3050 #, c-format msgid "The printer name \"%s\" has more than 12 characters which can make the printer unaccessible from Windows clients. Do you really want to use this name?" msgstr "" #: printer/printerdrake.pm:3059 #, c-format msgid "Every printer needs a name (for example \"printer\"). The Description and Location fields do not need to be filled in. They are comments for the users." msgstr "" #: printer/printerdrake.pm:3060 #, c-format msgid "Name of printer" msgstr "" #: printer/printerdrake.pm:3061 standalone/drakconnect:592 standalone/harddrake2:39 standalone/printerdrake:224 standalone/printerdrake:231 #, c-format msgid "Description" msgstr "" #: printer/printerdrake.pm:3062 standalone/printerdrake:224 standalone/printerdrake:231 #, c-format msgid "Location" msgstr "" #: printer/printerdrake.pm:3080 #, c-format msgid "Preparing printer database..." msgstr "" #: printer/printerdrake.pm:3206 #, c-format msgid "Your printer model" msgstr "" #: printer/printerdrake.pm:3207 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click \"The model is correct\" if so and if not, click \"Select model manually\" so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" #: printer/printerdrake.pm:3212 printer/printerdrake.pm:3215 #, c-format msgid "The model is correct" msgstr "" #: printer/printerdrake.pm:3213 printer/printerdrake.pm:3214 printer/printerdrake.pm:3217 #, c-format msgid "Select model manually" msgstr "" #: printer/printerdrake.pm:3241 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer model correctly. Find the correct model in the list when a wrong model or \"Raw printer\" is highlighted." msgstr "" #: printer/printerdrake.pm:3260 #, c-format msgid "Install a manufacturer-supplied PPD file" msgstr "" #: printer/printerdrake.pm:3292 #, c-format msgid "Every PostScript printer is delivered with a PPD file which describes the printer's options and features." msgstr "" #: printer/printerdrake.pm:3293 #, c-format msgid "This file is usually somewhere on the CD with the Windows and Mac drivers delivered with the printer." msgstr "" #: printer/printerdrake.pm:3294 #, c-format msgid "You can find the PPD files also on the manufacturer's web sites." msgstr "" #: printer/printerdrake.pm:3295 #, c-format msgid "If you have Windows installed on your machine, you can find the PPD file on your Windows partition, too." msgstr "" #: printer/printerdrake.pm:3296 #, c-format msgid "Installing the printer's PPD file and using it when setting up the printer makes all options of the printer available which are provided by the printer's hardware" msgstr "" #: printer/printerdrake.pm:3297 #, c-format msgid "Here you can choose the PPD file to be installed on your machine, it will then be used for the setup of your printer." msgstr "" #: printer/printerdrake.pm:3299 #, c-format msgid "Install PPD file from" msgstr "" #: printer/printerdrake.pm:3302 printer/printerdrake.pm:3310 standalone/scannerdrake:183 standalone/scannerdrake:192 standalone/scannerdrake:242 standalone/scannerdrake:250 #, c-format msgid "Floppy Disk" msgstr "" #: printer/printerdrake.pm:3303 printer/printerdrake.pm:3312 standalone/scannerdrake:184 standalone/scannerdrake:194 standalone/scannerdrake:243 standalone/scannerdrake:252 #, c-format msgid "Other place" msgstr "" #: printer/printerdrake.pm:3318 #, c-format msgid "Select PPD file" msgstr "" #: printer/printerdrake.pm:3322 #, c-format msgid "The PPD file %s does not exist or is unreadable!" msgstr "" #: printer/printerdrake.pm:3328 #, c-format msgid "The PPD file %s does not conform with the PPD specifications!" msgstr "" #: printer/printerdrake.pm:3339 #, c-format msgid "Installing PPD file..." msgstr "" #: printer/printerdrake.pm:3457 #, c-format msgid "OKI winprinter configuration" msgstr "" #: printer/printerdrake.pm:3458 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when connected to the first parallel port. When your printer is connected to another port or to a print server box please connect the printer to the first parallel port before you print a test page. Otherwise the printer will not work. Your connection type setting will be ignored by the driver." msgstr "" #: printer/printerdrake.pm:3483 printer/printerdrake.pm:3513 #, c-format msgid "Lexmark inkjet configuration" msgstr "" #: printer/printerdrake.pm:3484 #, c-format msgid "The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to." msgstr "" #: printer/printerdrake.pm:3514 #, c-format msgid "To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Click on the \"Drivers\" link. Then choose your model and afterwards \"Linux\" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and adjust the head alignment settings with this program." msgstr "" #: printer/printerdrake.pm:3524 #, c-format msgid "Lexmark X125 configuration" msgstr "" #: printer/printerdrake.pm:3525 #, c-format msgid "The driver for this printer only supports printers locally connected via USB, no printers on remote machines or print server boxes. Please connect your printer to a local USB port or configure it on the machine where it is connected to." msgstr "" #: printer/printerdrake.pm:3547 #, c-format msgid "Samsung ML/QL-85G configuration" msgstr "" #: printer/printerdrake.pm:3548 printer/printerdrake.pm:3575 #, c-format msgid "The driver for this printer only supports printers locally connected on the first parallel port, no printers on remote machines or print server boxes or on other parallel ports. Please connect your printer to the first parallel port or configure it on the machine where it is connected to." msgstr "" #: printer/printerdrake.pm:3574 #, c-format msgid "Canon LBP-460/660 configuration" msgstr "" #: printer/printerdrake.pm:3601 #, c-format msgid "Canon LBP-810/1120 (CAPT) configuration" msgstr "" #: printer/printerdrake.pm:3602 #, c-format msgid "The driver for this printer only supports printers locally connected via USB, no printers on remote machines or print server boxes or on the parallel port. Please connect your printer to the USB or configure it on the machine where it is directly connected to." msgstr "" #: printer/printerdrake.pm:3609 #, c-format msgid "Firmware-Upload for HP LaserJet 1000" msgstr "" #: printer/printerdrake.pm:3759 #, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if available) and also the hardware configuration of laser printers (memory, duplex unit, extra trays) are set correctly. Note that with a very high printout quality/resolution printing can get substantially slower." msgstr "" #: printer/printerdrake.pm:3884 #, c-format msgid "Printer default settings" msgstr "" #: printer/printerdrake.pm:3891 #, c-format msgid "Option %s must be an integer number!" msgstr "" #: printer/printerdrake.pm:3895 #, c-format msgid "Option %s must be a number!" msgstr "" #: printer/printerdrake.pm:3899 #, c-format msgid "Option %s out of range!" msgstr "" #: printer/printerdrake.pm:3951 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" #: printer/printerdrake.pm:3967 #, c-format msgid "Test pages" msgstr "" #: printer/printerdrake.pm:3968 #, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on laser printers with too low memory it can even not come out. In most cases it is enough to print the standard test page." msgstr "" #: printer/printerdrake.pm:3972 #, c-format msgid "No test pages" msgstr "" #: printer/printerdrake.pm:3973 #, c-format msgid "Print" msgstr "" #: printer/printerdrake.pm:3998 #, c-format msgid "Standard test page" msgstr "" #: printer/printerdrake.pm:4001 #, c-format msgid "Alternative test page (Letter)" msgstr "" #: printer/printerdrake.pm:4004 #, c-format msgid "Alternative test page (A4)" msgstr "" #: printer/printerdrake.pm:4006 #, c-format msgid "Photo test page" msgstr "" #: printer/printerdrake.pm:4019 printer/printerdrake.pm:4203 #, c-format msgid "Printing test page(s)..." msgstr "" #: printer/printerdrake.pm:4039 #, c-format msgid "Skipping photo test page." msgstr "" #: printer/printerdrake.pm:4056 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" "" msgstr "" #: printer/printerdrake.pm:4060 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "" msgstr "" #: printer/printerdrake.pm:4070 #, c-format msgid "Did it work properly?" msgstr "" #: printer/printerdrake.pm:4094 printer/printerdrake.pm:5496 #, c-format msgid "Raw printer" msgstr "" #: printer/printerdrake.pm:4132 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use the command \"%s \" or a graphical printing tool: \"xpp \" or \"kprinter \". The graphical tools allow you to choose the printer and to modify the option settings easily.\n" "" msgstr "" #: printer/printerdrake.pm:4134 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.\n" "" msgstr "" #: printer/printerdrake.pm:4137 printer/printerdrake.pm:4154 printer/printerdrake.pm:4164 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s \". " msgstr "" #: printer/printerdrake.pm:4140 printer/printerdrake.pm:4180 #, c-format msgid "" "To know about the options available for the current printer read either the list shown below or click on the \"Print option list\" button.%s%s%s\n" "\n" "" msgstr "" #: printer/printerdrake.pm:4144 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" "" msgstr "" #: printer/printerdrake.pm:4149 printer/printerdrake.pm:4159 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s \".\n" "" msgstr "" #: printer/printerdrake.pm:4151 printer/printerdrake.pm:4161 printer/printerdrake.pm:4171 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.\n" "" msgstr "" #: printer/printerdrake.pm:4156 printer/printerdrake.pm:4166 #, c-format msgid "To get a list of the options available for the current printer click on the \"Print option list\" button." msgstr "" #: printer/printerdrake.pm:4169 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s \" or \"%s \".\n" "" msgstr "" #: printer/printerdrake.pm:4173 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an icon on the desktop, labeled with \"STOP Printer!\", which stops all print jobs immediately when you click it. This is for example useful for paper jams.\n" "" msgstr "" #: printer/printerdrake.pm:4177 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s \".\n" "" msgstr "" #: printer/printerdrake.pm:4187 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "" #: printer/printerdrake.pm:4188 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "" #: printer/printerdrake.pm:4190 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "" #: printer/printerdrake.pm:4192 #, c-format msgid "Using/Maintaining the printer \"%s\"" msgstr "" #: printer/printerdrake.pm:4193 #, c-format msgid "Printing on the printer \"%s\"" msgstr "" #: printer/printerdrake.pm:4199 #, c-format msgid "Print option list" msgstr "" #: printer/printerdrake.pm:4221 #, c-format msgid "" "Your %s is set up with HP's HPLIP driver software. This way many special features of your printer are supported.\n" "\n" "" msgstr "" #: printer/printerdrake.pm:4224 #, c-format msgid "The scanner in your printer can be used with the usual SANE software, for example Kooka or XSane (Both in the Multimedia/Graphics menu). " msgstr "" #: printer/printerdrake.pm:4225 #, c-format msgid "" "Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to share your scanner on the network.\n" "\n" "" msgstr "" #: printer/printerdrake.pm:4229 #, c-format msgid "The memory card readers in your printer can be accessed like a usual USB mass storage device. " msgstr "" #: printer/printerdrake.pm:4230 #, c-format msgid "" "After inserting a card a hard disk icon to access the card should appear on your desktop.\n" "\n" "" msgstr "" #: printer/printerdrake.pm:4232 #, c-format msgid "The memory card readers in your printer can be accessed using HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access Photo Cards...\" button on the \"Functions\" tab. " msgstr "" #: printer/printerdrake.pm:4233 #, c-format msgid "" "Note that this is very slow, reading the pictures from the camera or a USB card reader is usually faster.\n" "\n" "" msgstr "" #: printer/printerdrake.pm:4236 #, c-format msgid "" "HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a lot of status monitoring and maintenance functions for your %s:\n" "\n" "" msgstr "" #: printer/printerdrake.pm:4237 #, c-format msgid "" " - Ink level/status info\n" "" msgstr "" #: printer/printerdrake.pm:4238 #, c-format msgid "" " - Ink nozzle cleaning\n" "" msgstr "" #: printer/printerdrake.pm:4239 #, c-format msgid "" " - Print head alignment\n" "" msgstr "" #: printer/printerdrake.pm:4240 #, c-format msgid "" " - Color calibration\n" "" msgstr "" #: printer/printerdrake.pm:4255 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the scanner when you have more than one) from the command line or with the graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, you can also scan by choosing the appropriate point in the \"File\"/\"Acquire\" menu. Call also \"man scanimage\" on the command line to get more information.\n" "\n" "You do not need to run \"scannerdrake\" for setting up scanning on this device, you only need to use \"scannerdrake\" if you want to share the scanner on the network." msgstr "" #: printer/printerdrake.pm:4281 #, c-format msgid "Your printer was configured automatically to give you access to the photo card drives from your PC. Now you can access your photo cards using the graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> \"MTools File Manager\") or the command line utilities \"mtools\" (enter \"man mtools\" on the command line for more info). You find the card's file system under the drive letter \"p:\", or subsequent drive letters when you have more than one HP printer with photo card drives. In \"MtoolsFM\" you can switch between drive letters with the field at the upper-right corners of the file lists." msgstr "" #: printer/printerdrake.pm:4324 printer/printerdrake.pm:4351 printer/printerdrake.pm:4386 #, c-format msgid "Transfer printer configuration" msgstr "" #: printer/printerdrake.pm:4325 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %s to %s, your current spooler. All the configuration data (printer name, description, location, connection type, and default option settings) is overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" "" msgstr "" #: printer/printerdrake.pm:4328 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the data into a free-formed command.\n" "" msgstr "" #: printer/printerdrake.pm:4330 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP printers.\n" "" msgstr "" #: printer/printerdrake.pm:4332 #, c-format msgid "" "LPD and LPRng do not support IPP printers.\n" "" msgstr "" #: printer/printerdrake.pm:4334 #, c-format msgid "In addition, queues not created with this program or \"foomatic-configure\" cannot be transferred." msgstr "" #: printer/printerdrake.pm:4335 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers or with native CUPS drivers cannot be transferred." msgstr "" #: printer/printerdrake.pm:4336 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" #: printer/printerdrake.pm:4339 #, c-format msgid "Do not transfer printers" msgstr "" #: printer/printerdrake.pm:4340 printer/printerdrake.pm:4356 #, c-format msgid "Transfer" msgstr "" #: printer/printerdrake.pm:4352 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" #: printer/printerdrake.pm:4373 #, c-format msgid "New printer name" msgstr "" #: printer/printerdrake.pm:4376 #, c-format msgid "Transferring %s..." msgstr "" #: printer/printerdrake.pm:4387 #, c-format msgid "You have transferred your former default printer (\"%s\"), Should it be also the default printer under the new printing system %s?" msgstr "" #: printer/printerdrake.pm:4397 #, c-format msgid "Refreshing printer data..." msgstr "" #: printer/printerdrake.pm:4407 #, c-format msgid "Starting network..." msgstr "" #: printer/printerdrake.pm:4451 printer/printerdrake.pm:4455 printer/printerdrake.pm:4457 #, c-format msgid "Configure the network now" msgstr "" #: printer/printerdrake.pm:4452 #, c-format msgid "Network functionality not configured" msgstr "" #: printer/printerdrake.pm:4453 #, c-format msgid "You are going to configure a remote printer. This needs working network access, but your network is not configured yet. If you go on without network configuration, you will not be able to use the printer which you are configuring now. How do you want to proceed?" msgstr "" #: printer/printerdrake.pm:4456 #, c-format msgid "Go on without configuring the network" msgstr "" #: printer/printerdrake.pm:4487 #, c-format msgid "The network configuration done during the installation cannot be started now. Please check whether the network is accessible after booting your system and correct the configuration using the %s Control Center, section \"Network & Internet\"/\"Connection\", and afterwards set up the printer, also using the %s Control Center, section \"Hardware\"/\"Printer\"" msgstr "" #: printer/printerdrake.pm:4488 #, c-format msgid "The network access was not running and could not be started. Please check your configuration and your hardware. Then try to configure your remote printer again." msgstr "" #: printer/printerdrake.pm:4498 #, c-format msgid "Restarting printing system..." msgstr "" #: printer/printerdrake.pm:4529 #, c-format msgid "high" msgstr "" #: printer/printerdrake.pm:4529 #, c-format msgid "paranoid" msgstr "" #: printer/printerdrake.pm:4531 #, c-format msgid "Installing a printing system in the %s security level" msgstr "" #: printer/printerdrake.pm:4532 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for print jobs and handles them. This daemon is also accessible by remote machines through the network and so it is a possible point for attacks. Therefore only a few selected daemons are started by default in this security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" #: printer/printerdrake.pm:4568 #, c-format msgid "Starting the printing system at boot time" msgstr "" #: printer/printerdrake.pm:4569 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a higher security level, because the printing system is a potential point for attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on again?" msgstr "" #: printer/printerdrake.pm:4592 #, c-format msgid "Checking installed software..." msgstr "" #: printer/printerdrake.pm:4598 #, c-format msgid "Removing %s..." msgstr "" #: printer/printerdrake.pm:4602 #, c-format msgid "Could not remove the %s printing system!" msgstr "" #: printer/printerdrake.pm:4626 #, c-format msgid "Installing %s..." msgstr "" #: printer/printerdrake.pm:4630 #, c-format msgid "Could not install the %s printing system!" msgstr "" #: printer/printerdrake.pm:4698 #, c-format msgid "In this mode there is no local printing system, all printing requests go directly to the server specified below. Note that it is not possible to define local print queues then and if the specified server is down it cannot be printed at all from this machine." msgstr "" #: printer/printerdrake.pm:4700 #, c-format msgid "Enter the host name or IP of your CUPS server and click OK if you want to use this mode, click \"Quit\" otherwise." msgstr "" #: printer/printerdrake.pm:4714 #, c-format msgid "Name or IP of remote server:" msgstr "" #: printer/printerdrake.pm:4734 #, c-format msgid "Setting Default Printer..." msgstr "" #: printer/printerdrake.pm:4754 #, c-format msgid "Local CUPS printing system or remote CUPS server?" msgstr "" #: printer/printerdrake.pm:4755 #, c-format msgid "The CUPS printing system can be used in two ways: " msgstr "" #: printer/printerdrake.pm:4757 #, c-format msgid "1. The CUPS printing system can run locally. " msgstr "" #: printer/printerdrake.pm:4758 #, c-format msgid "Then locally connected printers can be used and remote printers on other CUPS servers in the same network are automatically discovered. " msgstr "" #: printer/printerdrake.pm:4759 #, c-format msgid "Disadvantage of this approach is, that more resources on the local machine are needed: Additional software packages need to be installed, the CUPS daemon has to run in the background and needs some memory, and the IPP port (port 631) is opened. " msgstr "" #: printer/printerdrake.pm:4761 #, c-format msgid "2. All printing requests are immediately sent to a remote CUPS server. " msgstr "" #: printer/printerdrake.pm:4762 #, c-format msgid "Here local resource occupation is reduced to a minimum. No CUPS daemon is started or port opened, no software infrastructure for setting up local print queues is installed, so less memory and disk space is used. " msgstr "" #: printer/printerdrake.pm:4763 #, c-format msgid "Disadvantage is that it is not possible to define local printers then and if the specified server is down it cannot be printed at all from this machine. " msgstr "" #: printer/printerdrake.pm:4765 #, c-format msgid "How should CUPS be set up on your machine?" msgstr "" #: printer/printerdrake.pm:4769 printer/printerdrake.pm:4784 printer/printerdrake.pm:4788 printer/printerdrake.pm:4794 #, c-format msgid "Remote server, specify Name or IP here:" msgstr "" #: printer/printerdrake.pm:4783 #, c-format msgid "Local CUPS printing system" msgstr "" #: printer/printerdrake.pm:4822 #, c-format msgid "Select Printer Spooler" msgstr "" #: printer/printerdrake.pm:4823 #, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "" #: printer/printerdrake.pm:4872 #, c-format msgid "Failed to configure printer \"%s\"!" msgstr "" #: printer/printerdrake.pm:4887 #, c-format msgid "Installing Foomatic..." msgstr "" #: printer/printerdrake.pm:4893 #, c-format msgid "Could not install %s packages, %s cannot be started!" msgstr "" #: printer/printerdrake.pm:5088 #, c-format msgid "The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it. " msgstr "" #: printer/printerdrake.pm:5118 #, c-format msgid "Display all available remote CUPS printers" msgstr "" #: printer/printerdrake.pm:5119 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" #: printer/printerdrake.pm:5130 #, c-format msgid "CUPS configuration" msgstr "" #: printer/printerdrake.pm:5151 #, c-format msgid "Change the printing system" msgstr "" #: printer/printerdrake.pm:5160 #, c-format msgid "Normal Mode" msgstr "" #: printer/printerdrake.pm:5161 #, c-format msgid "Expert Mode" msgstr "" #: printer/printerdrake.pm:5439 printer/printerdrake.pm:5497 printer/printerdrake.pm:5583 printer/printerdrake.pm:5592 #, c-format msgid "Printer options" msgstr "" #: printer/printerdrake.pm:5475 #, c-format msgid "Modify printer configuration" msgstr "" #: printer/printerdrake.pm:5477 #, c-format msgid "" "Printer %s%s\n" "What do you want to modify on this printer?" msgstr "" #: printer/printerdrake.pm:5482 #, c-format msgid "This printer is disabled" msgstr "" #: printer/printerdrake.pm:5484 #, c-format msgid "Do it!" msgstr "" #: printer/printerdrake.pm:5489 printer/printerdrake.pm:5551 #, c-format msgid "Printer connection type" msgstr "" #: printer/printerdrake.pm:5490 printer/printerdrake.pm:5557 #, c-format msgid "Printer name, description, location" msgstr "" #: printer/printerdrake.pm:5492 printer/printerdrake.pm:5576 #, c-format msgid "Printer manufacturer, model, driver" msgstr "" #: printer/printerdrake.pm:5493 printer/printerdrake.pm:5577 #, c-format msgid "Printer manufacturer, model" msgstr "" #: printer/printerdrake.pm:5499 printer/printerdrake.pm:5587 #, c-format msgid "Set this printer as the default" msgstr "" #: printer/printerdrake.pm:5504 printer/printerdrake.pm:5593 printer/printerdrake.pm:5595 printer/printerdrake.pm:5604 #, c-format msgid "Enable Printer" msgstr "" #: printer/printerdrake.pm:5507 printer/printerdrake.pm:5598 printer/printerdrake.pm:5599 printer/printerdrake.pm:5601 #, c-format msgid "Disable Printer" msgstr "" #: printer/printerdrake.pm:5511 printer/printerdrake.pm:5605 #, c-format msgid "Printer communication error handling" msgstr "" #: printer/printerdrake.pm:5512 printer/printerdrake.pm:5609 #, c-format msgid "Print test pages" msgstr "" #: printer/printerdrake.pm:5513 printer/printerdrake.pm:5611 #, c-format msgid "Learn how to use this printer" msgstr "" #: printer/printerdrake.pm:5514 printer/printerdrake.pm:5613 #, c-format msgid "Remove printer" msgstr "" #: printer/printerdrake.pm:5565 #, c-format msgid "Removing old printer \"%s\"..." msgstr "" #: printer/printerdrake.pm:5596 #, c-format msgid "Printer \"%s\" is now enabled." msgstr "" #: printer/printerdrake.pm:5602 #, c-format msgid "Printer \"%s\" is now disabled." msgstr "" #: printer/printerdrake.pm:5644 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "" #: printer/printerdrake.pm:5648 #, c-format msgid "Removing printer \"%s\"..." msgstr "" #: printer/printerdrake.pm:5672 #, c-format msgid "Default printer" msgstr "" #: printer/printerdrake.pm:5673 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "" #: raid.pm:41 #, c-format msgid "Can not add a partition to _formatted_ RAID %s" msgstr "" #: raid.pm:145 #, c-format msgid "" "Not enough partitions for RAID level %d\n" "" msgstr "" #: scanner.pm:96 #, c-format msgid "Could not create directory /usr/share/sane/firmware!" msgstr "" #: scanner.pm:107 #, c-format msgid "Could not create link /usr/share/sane/%s!" msgstr "" #: scanner.pm:114 #, c-format msgid "Could not copy firmware file %s to /usr/share/sane/firmware!" msgstr "" #: scanner.pm:121 #, c-format msgid "Could not set permissions of firmware file %s!" msgstr "" #: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70 standalone/scannerdrake:78 standalone/scannerdrake:346 standalone/scannerdrake:382 standalone/scannerdrake:446 standalone/scannerdrake:490 standalone/scannerdrake:494 standalone/scannerdrake:516 standalone/scannerdrake:581 #, c-format msgid "Scannerdrake" msgstr "" #: scanner.pm:201 standalone/scannerdrake:947 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "" #: scanner.pm:202 #, c-format msgid "Your scanner(s) will not be available for non-root users." msgstr "" #: security/help.pm:11 #, c-format msgid "Accept/Refuse bogus IPv4 error messages." msgstr "" #: security/help.pm:13 #, c-format msgid " Accept/Refuse broadcasted icmp echo." msgstr "" #: security/help.pm:15 #, c-format msgid " Accept/Refuse icmp echo." msgstr "" #: security/help.pm:17 #, c-format msgid "Allow/Forbid autologin." msgstr "" #. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is #: security/help.pm:21 #, c-format msgid "" "If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" "If set to NONE, no issues are allowed.\n" "\n" "Else only /etc/issue is allowed." msgstr "" #: security/help.pm:27 #, c-format msgid "Allow/Forbid reboot by the console user." msgstr "" #: security/help.pm:29 #, c-format msgid "Allow/Forbid remote root login." msgstr "" #: security/help.pm:31 #, c-format msgid "Allow/Forbid direct root login." msgstr "" #: security/help.pm:33 #, c-format msgid "Allow/Forbid the list of users on the system on display managers (kdm and gdm)." msgstr "" #: security/help.pm:35 #, c-format msgid "" "Allow/forbid to export display when\n" "passing from the root account to the other users.\n" "\n" "See pam_xauth(8) for more details.'" msgstr "" #: security/help.pm:40 #, c-format msgid "" "Allow/Forbid X connections:\n" "\n" "- ALL (all connections are allowed),\n" "\n" "- LOCAL (only connection from local machine),\n" "\n" "- NONE (no connection)." msgstr "" #: security/help.pm:48 #, c-format msgid "" "The argument specifies if clients are authorized to connect\n" "to the X server from the network on the tcp port 6000 or not." msgstr "" #. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're #: security/help.pm:53 #, c-format msgid "" "Authorize:\n" "\n" "- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if set to \"ALL\",\n" "\n" "- only local ones if set to \"LOCAL\"\n" "\n" "- none if set to \"NONE\".\n" "\n" "To authorize the services you need, use /etc/hosts.allow (see hosts.allow(5))." msgstr "" #: security/help.pm:63 #, c-format msgid "" "If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" "is greater than 3 in /etc/security/msec/security.conf, creates the\n" "symlink /etc/security/msec/server to point to\n" "/etc/security/msec/server..\n" "\n" "The /etc/security/msec/server is used by chkconfig --add to decide to\n" "add a service if it is present in the file during the installation of\n" "packages." msgstr "" #: security/help.pm:72 #, c-format msgid "" "Enable/Disable crontab and at for users.\n" "\n" "Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" "and crontab(1))." msgstr "" #: security/help.pm:77 #, c-format msgid "Enable/Disable syslog reports to console 12" msgstr "" #: security/help.pm:79 #, c-format msgid "" "Enable/Disable name resolution spoofing protection. If\n" "\"%s\" is true, also reports to syslog." msgstr "" #: security/help.pm:80 standalone/draksec:213 #, c-format msgid "Security Alerts:" msgstr "" #: security/help.pm:82 #, c-format msgid "Enable/Disable IP spoofing protection." msgstr "" #: security/help.pm:84 #, c-format msgid "Enable/Disable libsafe if libsafe is found on the system." msgstr "" #: security/help.pm:86 #, c-format msgid "Enable/Disable the logging of IPv4 strange packets." msgstr "" #: security/help.pm:88 #, c-format msgid "Enable/Disable msec hourly security check." msgstr "" #: security/help.pm:90 #, c-format msgid " Enabling su only from members of the wheel group or allow su from any user." msgstr "" #: security/help.pm:92 #, c-format msgid "Use password to authenticate users." msgstr "" #: security/help.pm:94 #, c-format msgid "Activate/Disable ethernet cards promiscuity check." msgstr "" #: security/help.pm:96 #, c-format msgid " Activate/Disable daily security check." msgstr "" #: security/help.pm:98 #, c-format msgid " Enable/Disable sulogin(8) in single user level." msgstr "" #: security/help.pm:100 #, c-format msgid "Add the name as an exception to the handling of password aging by msec." msgstr "" #: security/help.pm:102 #, c-format msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." msgstr "" #: security/help.pm:104 #, c-format msgid "Set the password history length to prevent password reuse." msgstr "" #: security/help.pm:106 #, c-format msgid "Set the password minimum length and minimum number of digit and minimum number of capitalized letters." msgstr "" #: security/help.pm:108 #, c-format msgid "Set the root umask." msgstr "" #: security/help.pm:109 #, c-format msgid "if set to yes, check open ports." msgstr "" #: security/help.pm:110 #, c-format msgid "" "if set to yes, check for:\n" "\n" "- empty passwords,\n" "\n" "- no password in /etc/shadow\n" "\n" "- for users with the 0 id other than root." msgstr "" #: security/help.pm:117 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" #: security/help.pm:118 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "" #: security/help.pm:119 #, c-format msgid "if set to yes, run the daily security checks." msgstr "" #: security/help.pm:120 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "" #: security/help.pm:121 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "" #: security/help.pm:122 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "" #: security/help.pm:123 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "" #: security/help.pm:124 #, c-format msgid "if set to yes, report unowned files." msgstr "" #: security/help.pm:125 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "" #: security/help.pm:126 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "" #: security/help.pm:127 #, c-format msgid "if set, send the mail report to this email address else send it to root." msgstr "" #: security/help.pm:128 #, c-format msgid "if set to yes, report check result by mail." msgstr "" #: security/help.pm:129 #, c-format msgid "Do not send mails if there's nothing to warn about" msgstr "" #: security/help.pm:130 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "" #: security/help.pm:131 #, c-format msgid "if set to yes, report check result to syslog." msgstr "" #: security/help.pm:132 #, c-format msgid "if set to yes, reports check result to tty." msgstr "" #: security/help.pm:134 #, c-format msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "" #: security/help.pm:136 #, c-format msgid "Set the shell timeout. A value of zero means no timeout." msgstr "" #: security/help.pm:136 #, c-format msgid "Timeout unit is second" msgstr "" #: security/help.pm:138 #, c-format msgid "Set the user umask." msgstr "" #: security/l10n.pm:11 #, c-format msgid "Accept bogus IPv4 error messages" msgstr "" #: security/l10n.pm:12 #, c-format msgid "Accept broadcasted icmp echo" msgstr "" #: security/l10n.pm:13 #, c-format msgid "Accept icmp echo" msgstr "" #: security/l10n.pm:15 #, c-format msgid "/etc/issue* exist" msgstr "" #: security/l10n.pm:16 #, c-format msgid "Reboot by the console user" msgstr "" #: security/l10n.pm:17 #, c-format msgid "Allow remote root login" msgstr "" #: security/l10n.pm:18 #, c-format msgid "Direct root login" msgstr "" #: security/l10n.pm:19 #, c-format msgid "List users on display managers (kdm and gdm)" msgstr "" #: security/l10n.pm:20 #, c-format msgid "Export display when passing from root to the other users" msgstr "" #: security/l10n.pm:21 #, c-format msgid "Allow X Window connections" msgstr "" #: security/l10n.pm:22 #, c-format msgid "Authorize TCP connections to X Window" msgstr "" #: security/l10n.pm:23 #, c-format msgid "Authorize all services controlled by tcp_wrappers" msgstr "" #: security/l10n.pm:24 #, c-format msgid "Chkconfig obey msec rules" msgstr "" #: security/l10n.pm:25 #, c-format msgid "Enable \"crontab\" and \"at\" for users" msgstr "" #: security/l10n.pm:26 #, c-format msgid "Syslog reports to console 12" msgstr "" #: security/l10n.pm:27 #, c-format msgid "Name resolution spoofing protection" msgstr "" #: security/l10n.pm:28 #, c-format msgid "Enable IP spoofing protection" msgstr "" #: security/l10n.pm:29 #, c-format msgid "Enable libsafe if libsafe is found on the system" msgstr "" #: security/l10n.pm:30 #, c-format msgid "Enable the logging of IPv4 strange packets" msgstr "" #: security/l10n.pm:31 #, c-format msgid "Enable msec hourly security check" msgstr "" #: security/l10n.pm:32 #, c-format msgid "Enable su only from the wheel group members or for any user" msgstr "" #: security/l10n.pm:33 #, c-format msgid "Use password to authenticate users" msgstr "" #: security/l10n.pm:34 #, c-format msgid "Ethernet cards promiscuity check" msgstr "" #: security/l10n.pm:35 #, c-format msgid "Daily security check" msgstr "" #: security/l10n.pm:36 #, c-format msgid "Sulogin(8) in single user level" msgstr "" #: security/l10n.pm:37 #, c-format msgid "No password aging for" msgstr "" #: security/l10n.pm:38 #, c-format msgid "Set password expiration and account inactivation delays" msgstr "" #: security/l10n.pm:39 #, c-format msgid "Password history length" msgstr "" #: security/l10n.pm:40 #, c-format msgid "Password minimum length and number of digits and upcase letters" msgstr "" #: security/l10n.pm:41 #, c-format msgid "Root umask" msgstr "" #: security/l10n.pm:42 #, c-format msgid "Shell history size" msgstr "" #: security/l10n.pm:43 #, c-format msgid "Shell timeout" msgstr "" #: security/l10n.pm:44 #, c-format msgid "User umask" msgstr "" #: security/l10n.pm:45 #, c-format msgid "Check open ports" msgstr "" #: security/l10n.pm:46 #, c-format msgid "Check for unsecured accounts" msgstr "" #: security/l10n.pm:47 #, c-format msgid "Check permissions of files in the users' home" msgstr "" #: security/l10n.pm:48 #, c-format msgid "Check if the network devices are in promiscuous mode" msgstr "" #: security/l10n.pm:49 #, c-format msgid "Run the daily security checks" msgstr "" #: security/l10n.pm:50 #, c-format msgid "Check additions/removals of sgid files" msgstr "" #: security/l10n.pm:51 #, c-format msgid "Check empty password in /etc/shadow" msgstr "" #: security/l10n.pm:52 #, c-format msgid "Verify checksum of the suid/sgid files" msgstr "" #: security/l10n.pm:53 #, c-format msgid "Check additions/removals of suid root files" msgstr "" #: security/l10n.pm:54 #, c-format msgid "Report unowned files" msgstr "" #: security/l10n.pm:55 #, c-format msgid "Check files/directories writable by everybody" msgstr "" #: security/l10n.pm:56 #, c-format msgid "Run chkrootkit checks" msgstr "" #: security/l10n.pm:57 #, c-format msgid "Do not send mails when unneeded" msgstr "" #: security/l10n.pm:58 #, c-format msgid "If set, send the mail report to this email address else send it to root" msgstr "" #: security/l10n.pm:59 #, c-format msgid "Report check result by mail" msgstr "" #: security/l10n.pm:60 #, c-format msgid "Run some checks against the rpm database" msgstr "" #: security/l10n.pm:61 #, c-format msgid "Report check result to syslog" msgstr "" #: security/l10n.pm:62 #, c-format msgid "Reports check result to tty" msgstr "" #: security/level.pm:10 #, c-format msgid "Welcome To Crackers" msgstr "" #: security/level.pm:11 #, c-format msgid "Poor" msgstr "" #: security/level.pm:13 #, c-format msgid "High" msgstr "" #: security/level.pm:14 #, c-format msgid "Higher" msgstr "" #: security/level.pm:15 #, c-format msgid "Paranoid" msgstr "" #: security/level.pm:41 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" #: security/level.pm:44 #, c-format msgid "Passwords are now enabled, but use as a networked computer is still not recommended." msgstr "" #: security/level.pm:45 #, c-format msgid "This is the standard security recommended for a computer that will be used to connect to the Internet as a client." msgstr "" #: security/level.pm:46 #, c-format msgid "There are already some restrictions, and more automatic checks are run every night." msgstr "" #: security/level.pm:47 #, c-format msgid "" "With this security level, the use of this system as a server becomes possible.\n" "The security is now high enough to use the system as a server which can accept\n" "connections from many clients. Note: if your machine is only a client on the Internet, you should choose a lower level." msgstr "" #: security/level.pm:50 #, c-format msgid "This is similar to the previous level, but the system is entirely closed and security features are at their maximum." msgstr "" #: security/level.pm:55 #, c-format msgid "DrakSec Basic Options" msgstr "" #: security/level.pm:57 #, c-format msgid "Please choose the desired security level" msgstr "" #: security/level.pm:61 #, c-format msgid "Security level" msgstr "" #: security/level.pm:63 #, c-format msgid "Use libsafe for servers" msgstr "" #: security/level.pm:64 #, c-format msgid "A library which defends against buffer overflow and format string attacks." msgstr "" #: security/level.pm:65 #, c-format msgid "Security Administrator (login or email)" msgstr "" #: services.pm:19 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "" #: services.pm:20 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "" #: services.pm:21 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" #: services.pm:23 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" #: services.pm:25 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" #: services.pm:28 #, c-format msgid "" "FAM is a file monitoring daemon. It is used to get reports when files change.\n" "It is used by GNOME and KDE" msgstr "" #: services.pm:30 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste operations,\n" "and includes support for pop-up menus on the console." msgstr "" #: services.pm:33 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" #: services.pm:35 #, c-format msgid "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" #: services.pm:36 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd disables\n" "all of the services it is responsible for." msgstr "" #: services.pm:40 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" #: services.pm:42 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" #: services.pm:45 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" #: services.pm:47 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "" #: services.pm:48 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" #: services.pm:50 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" #: services.pm:52 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" #: services.pm:54 #, c-format msgid "named (BIND) is a Domain Name Server (DNS) that is used to resolve host names to IP addresses." msgstr "" #: services.pm:55 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" #: services.pm:57 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" #: services.pm:59 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" #: services.pm:62 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" #: services.pm:64 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and Xorg at boot." msgstr "" #: services.pm:66 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "" #: services.pm:67 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It will not get started unless configured so it is safe to have\n" "it installed on machines that do not need it." msgstr "" #: services.pm:70 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" #: services.pm:73 #, c-format msgid "Postfix is a Mail Transport Agent, which is the program that moves mail from one machine to another." msgstr "" #: services.pm:74 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" #: services.pm:76 #, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" #: services.pm:78 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" #: services.pm:81 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" #: services.pm:83 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" #: services.pm:85 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similar to finger)." msgstr "" #: services.pm:87 #, c-format msgid "Launch the sound system on your machine" msgstr "" #: services.pm:88 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" #: services.pm:90 #, c-format msgid "Load the drivers for your usb devices." msgstr "" #: services.pm:91 #, c-format msgid "Starts the X Font Server (this is mandatory for Xorg to run)." msgstr "" #: services.pm:115 services.pm:157 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "" #: services.pm:127 standalone/draksambashare:105 #, c-format msgid "Printing" msgstr "" #: services.pm:128 #, c-format msgid "Internet" msgstr "" #: services.pm:131 #, c-format msgid "File sharing" msgstr "" #: services.pm:138 #, c-format msgid "Remote Administration" msgstr "" #: services.pm:146 #, c-format msgid "Database Server" msgstr "" #: services.pm:209 #, c-format msgid "running" msgstr "" #: services.pm:209 #, c-format msgid "stopped" msgstr "" #: services.pm:213 #, c-format msgid "Services and daemons" msgstr "" #: services.pm:219 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" #: services.pm:224 ugtk2.pm:1009 #, c-format msgid "Info" msgstr "" #: services.pm:227 #, c-format msgid "Start when requested" msgstr "" #: services.pm:227 #, c-format msgid "On boot" msgstr "" #: services.pm:244 #, c-format msgid "Start" msgstr "" #: services.pm:244 #, c-format msgid "Stop" msgstr "" #: share/advertising/01.pl:3 #, c-format msgid "Mandriva Linux 2006: Packs" msgstr "" #: share/advertising/02.pl:3 #, c-format msgid "Mandriva Linux 2006: More features" msgstr "" #: share/advertising/03.pl:3 #, c-format msgid "Interactive firewall" msgstr "" #: share/advertising/04.pl:3 #, c-format msgid "Desktop search" msgstr "" #: share/advertising/05.pl:3 #, c-format msgid "New package manager" msgstr "" #: share/advertising/06.pl:3 #, c-format msgid "Mandriva Linux 2006: More performances" msgstr "" #: share/advertising/07.pl:3 #, c-format msgid "Latest kernel and GCC" msgstr "" #: share/advertising/08.pl:3 #, c-format msgid "High Availibility" msgstr "" #: share/advertising/09.pl:3 #, c-format msgid "Delta RPM" msgstr "" #: share/advertising/10.pl:3 #, c-format msgid "Low resources setup" msgstr "" #: share/advertising/11.pl:3 #, c-format msgid "Boot time reduction" msgstr "" #: share/advertising/12.pl:3 #, c-format msgid "Mandriva Linux 2006: Easier to use" msgstr "" #: share/advertising/13.pl:3 #, c-format msgid "Latest graphical interfaces: KDE and GNOME" msgstr "" #: share/advertising/14.pl:3 #, c-format msgid "auto-installation servers" msgstr "" #: share/advertising/15.pl:3 #, c-format msgid "Easy and quick installation" msgstr "" #: share/advertising/16.pl:3 #, c-format msgid "Easy configuration thanks to 60 wizards" msgstr "" #: share/advertising/17.pl:3 #, c-format msgid "Look and feel improved" msgstr "" #: share/advertising/18.pl:3 #, c-format msgid "New webmin theme" msgstr "" #: share/advertising/19.pl:3 #, c-format msgid "Mandriva Linux 2006: More support" msgstr "" #: share/advertising/20.pl:3 #, c-format msgid "Better Hardware support" msgstr "" #: share/advertising/21.pl:3 #, c-format msgid "Xen support" msgstr "" #: share/advertising/22.pl:3 #, c-format msgid "Mandriva Linux 2006: More information" msgstr "" #: share/advertising/23.pl:3 #, c-format msgid "Mandriva Linux 2006: Where to buy?" msgstr "" #: share/advertising/24.pl:3 #, c-format msgid "Where to find technical assistance?" msgstr "" #: share/advertising/25.pl:3 #, c-format msgid "How to join the Mandriva Linux community?" msgstr "" #: share/advertising/26.pl:3 #, c-format msgid "How to maintain your system up-to-date?" msgstr "" #: share/compssUsers.pl:26 #, c-format msgid "Office Workstation" msgstr "" #: share/compssUsers.pl:28 #, c-format msgid "Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets (OpenOffice.org Calc, Kspread), PDF viewers, etc" msgstr "" #: share/compssUsers.pl:29 #, c-format msgid "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc" msgstr "" #: share/compssUsers.pl:34 #, c-format msgid "Game station" msgstr "" #: share/compssUsers.pl:35 #, c-format msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "" #: share/compssUsers.pl:38 #, c-format msgid "Multimedia station" msgstr "" #: share/compssUsers.pl:39 #, c-format msgid "Sound and video playing/editing programs" msgstr "" #: share/compssUsers.pl:44 #, c-format msgid "Internet station" msgstr "" #: share/compssUsers.pl:45 #, c-format msgid "Set of tools to read and send mail and news (mutt, tin..) and to browse the Web" msgstr "" #: share/compssUsers.pl:50 #, c-format msgid "Network Computer (client)" msgstr "" #: share/compssUsers.pl:51 #, c-format msgid "Clients for different protocols including ssh" msgstr "" #: share/compssUsers.pl:55 #, c-format msgid "Configuration" msgstr "" #: share/compssUsers.pl:56 #, c-format msgid "Tools to ease the configuration of your computer" msgstr "" #: share/compssUsers.pl:60 #, c-format msgid "Console Tools" msgstr "" #: share/compssUsers.pl:61 #, c-format msgid "Editors, shells, file tools, terminals" msgstr "" #: share/compssUsers.pl:66 share/compssUsers.pl:170 #, c-format msgid "C and C++ development libraries, programs and include files" msgstr "" #: share/compssUsers.pl:70 share/compssUsers.pl:174 #, c-format msgid "Documentation" msgstr "" #: share/compssUsers.pl:71 share/compssUsers.pl:175 #, c-format msgid "Books and Howto's on Linux and Free Software" msgstr "" #: share/compssUsers.pl:75 share/compssUsers.pl:178 #, c-format msgid "LSB" msgstr "" #: share/compssUsers.pl:76 share/compssUsers.pl:179 #, c-format msgid "Linux Standard Base. Third party applications support" msgstr "" #: share/compssUsers.pl:86 #, c-format msgid "Apache" msgstr "" #: share/compssUsers.pl:89 #, c-format msgid "Groupware" msgstr "" #: share/compssUsers.pl:90 #, c-format msgid "Kolab Server" msgstr "" #: share/compssUsers.pl:93 share/compssUsers.pl:134 #, c-format msgid "Firewall/Router" msgstr "" #: share/compssUsers.pl:94 share/compssUsers.pl:135 #, c-format msgid "Internet gateway" msgstr "" #: share/compssUsers.pl:97 #, c-format msgid "Mail/News" msgstr "" #: share/compssUsers.pl:98 #, c-format msgid "Postfix mail server, Inn news server" msgstr "" #: share/compssUsers.pl:101 #, c-format msgid "Directory Server" msgstr "" #: share/compssUsers.pl:105 #, c-format msgid "FTP Server" msgstr "" #: share/compssUsers.pl:106 #, c-format msgid "ProFTPd" msgstr "" #: share/compssUsers.pl:109 #, c-format msgid "DNS/NIS" msgstr "" #: share/compssUsers.pl:110 #, c-format msgid "Domain Name and Network Information Server" msgstr "" #: share/compssUsers.pl:113 #, c-format msgid "File and Printer Sharing Server" msgstr "" #: share/compssUsers.pl:114 #, c-format msgid "NFS Server, Samba server" msgstr "" #: share/compssUsers.pl:117 share/compssUsers.pl:130 #, c-format msgid "Database" msgstr "" #: share/compssUsers.pl:118 #, c-format msgid "PostgreSQL and MySQL Database Server" msgstr "" #: share/compssUsers.pl:122 #, c-format msgid "Web/FTP" msgstr "" #: share/compssUsers.pl:123 #, c-format msgid "Apache, Pro-ftpd" msgstr "" #: share/compssUsers.pl:126 #, c-format msgid "Mail" msgstr "" #: share/compssUsers.pl:127 #, c-format msgid "Postfix mail server" msgstr "" #: share/compssUsers.pl:131 #, c-format msgid "PostgreSQL or MySQL database server" msgstr "" #: share/compssUsers.pl:138 #, c-format msgid "Network Computer server" msgstr "" #: share/compssUsers.pl:139 #, c-format msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "" #: share/compssUsers.pl:147 #, c-format msgid "KDE Workstation" msgstr "" #: share/compssUsers.pl:148 #, c-format msgid "The K Desktop Environment, the basic graphical environment with a collection of accompanying tools" msgstr "" #: share/compssUsers.pl:152 #, c-format msgid "GNOME Workstation" msgstr "" #: share/compssUsers.pl:153 #, c-format msgid "A graphical environment with user-friendly set of applications and desktop tools" msgstr "" #: share/compssUsers.pl:156 #, c-format msgid "IceWm Desktop" msgstr "" #: share/compssUsers.pl:160 #, c-format msgid "Other Graphical Desktops" msgstr "" #: share/compssUsers.pl:161 #, c-format msgid "Window Maker, Enlightenment, Fvwm, etc" msgstr "" #: share/compssUsers.pl:184 #, c-format msgid "Utilities" msgstr "" #: share/compssUsers.pl:186 share/compssUsers.pl:187 standalone/logdrake:384 #, c-format msgid "SSH Server" msgstr "" #: share/compssUsers.pl:191 #, c-format msgid "Webmin" msgstr "" #: share/compssUsers.pl:192 #, c-format msgid "Webmin Remote Configuration Server" msgstr "" #: share/compssUsers.pl:196 #, c-format msgid "Network Utilities/Monitoring" msgstr "" #: share/compssUsers.pl:197 #, c-format msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..." msgstr "" #: share/compssUsers.pl:201 #, c-format msgid "Mandriva Wizards" msgstr "" #: share/compssUsers.pl:202 #, c-format msgid "Wizards to configure server" msgstr "" #: standalone.pm:21 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" "" msgstr "" #: standalone.pm:40 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" "" msgstr "" #: standalone.pm:52 #, c-format msgid "" "[--boot] [--splash]\n" "OPTIONS:\n" " --boot - enable to configure boot loader\n" " --splash - enable to configure boot theme\n" "default mode: offer to configure autologin feature" msgstr "" #: standalone.pm:57 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of Mandriva Linux tools\n" " --incident - program should be one of Mandriva Linux tools" msgstr "" #: standalone.pm:63 #, c-format msgid "" "[--add]\n" " --add - \"add a network interface\" wizard\n" " --del - \"delete a network interface\" wizard\n" " --skip-wizard - manage connections\n" " --internet - configure internet\n" " --wizard - like --add" msgstr "" #: standalone.pm:69 #, c-format msgid "" "\n" "Font Importation and monitoring application\n" "\n" "OPTIONS:\n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--install : accept any font file and any directory.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" #: standalone.pm:84 #, c-format msgid "" "[OPTIONS]...\n" "Mandriva Linux Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, IP, nbi image name)" msgstr "" #: standalone.pm:96 #, c-format msgid "[keyboard]" msgstr "" #: standalone.pm:97 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "" #: standalone.pm:98 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : do not be interactive. To be used with (dis)connect." msgstr "" #: standalone.pm:107 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr "" #: standalone.pm:108 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation do not ask first confirmation question in Mandriva Update mode\n" " --no-verify-rpm do not verify packages signatures\n" " --changelog-first display changelog before filelist in the description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" #: standalone.pm:113 #, c-format msgid "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-usbtable] [--dynamic=dev]" msgstr "" #: standalone.pm:114 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" #: standalone.pm:146 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] [-v|--version] " msgstr "" #: standalone/XFdrake:59 #, c-format msgid "You need to reboot for changes to take effect" msgstr "" #: standalone/XFdrake:90 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "" #: standalone/XFdrake:94 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "" #: standalone/drakTermServ:102 standalone/drakTermServ:108 #, c-format msgid "" "%s: %s requires a username...\n" "" msgstr "" #: standalone/drakTermServ:119 #, c-format msgid "" "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, 0/1 for Local Config...\n" "" msgstr "" #: standalone/drakTermServ:125 #, c-format msgid "" "%s: %s requires hostname...\n" "" msgstr "" #: standalone/drakTermServ:207 standalone/drakTermServ:210 #, c-format msgid "Terminal Server Configuration" msgstr "" #: standalone/drakTermServ:216 #, c-format msgid "dhcpd Config" msgstr "" #: standalone/drakTermServ:220 #, c-format msgid "Enable Server" msgstr "" #: standalone/drakTermServ:226 #, c-format msgid "Disable Server" msgstr "" #: standalone/drakTermServ:232 #, c-format msgid "Start Server" msgstr "" #: standalone/drakTermServ:238 #, c-format msgid "Stop Server" msgstr "" #: standalone/drakTermServ:247 #, c-format msgid "Etherboot Floppy/ISO" msgstr "" #: standalone/drakTermServ:251 #, c-format msgid "Net Boot Images" msgstr "" #: standalone/drakTermServ:258 #, c-format msgid "Add/Del Users" msgstr "" #: standalone/drakTermServ:262 #, c-format msgid "Add/Del Clients" msgstr "" #: standalone/drakTermServ:270 #, c-format msgid "Images" msgstr "" #: standalone/drakTermServ:271 #, c-format msgid "Clients/Users" msgstr "" #: standalone/drakTermServ:289 standalone/drakbug:47 #, c-format msgid "First Time Wizard" msgstr "" #: standalone/drakTermServ:326 standalone/drakTermServ:327 #, c-format msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$" msgstr "" #: standalone/drakTermServ:333 #, c-format msgid "" "\n" " This wizard routine will:\n" " \t1) Ask you to select either 'thin' or 'fat' clients.\n" "\t2) Setup DHCP.\n" "\t\n" "After doing these steps, the wizard will:\n" "\t\n" " a) Make all nbis. \n" " b) Activate the server. \n" " c) Start the server. \n" " d) Synchronize the shadow files so that all users, including root, \n" " are added to the shadow$$CLIENT$$ file. \n" " e) Ask you to make a boot floppy.\n" " f) If it's thin clients, ask if you want to restart KDM.\n" "" msgstr "" #: standalone/drakTermServ:379 #, c-format msgid "Cancel Wizard" msgstr "" #: standalone/drakTermServ:394 #, c-format msgid "Please save dhcpd config!" msgstr "" #: standalone/drakTermServ:422 #, c-format msgid "Use thin clients." msgstr "" #: standalone/drakTermServ:424 #, c-format msgid "Sync client X keyboard settings with server." msgstr "" #: standalone/drakTermServ:426 #, c-format msgid "" "Please select default client type (Fat is the default type if 'Use thin' is unchecked).\n" " 'Thin' clients run everything off the server's CPU/RAM, using the client display.\n" " 'Fat' clients use their own CPU/RAM but the server's filesystem." msgstr "" #: standalone/drakTermServ:446 #, c-format msgid "Creating net boot images for all kernels" msgstr "" #: standalone/drakTermServ:447 standalone/drakTermServ:769 standalone/drakTermServ:785 #, c-format msgid "This will take a few minutes." msgstr "" #: standalone/drakTermServ:453 standalone/drakTermServ:493 #, c-format msgid "Done!" msgstr "" #: standalone/drakTermServ:464 standalone/drakTermServ:849 #, c-format msgid "%s failed" msgstr "" #: standalone/drakTermServ:473 #, c-format msgid "" "Not enough space to create\n" "NBIs in %s.\n" "Needed: %d MB, Free: %d MB" msgstr "" #: standalone/drakTermServ:479 #, c-format msgid "Syncing server user list with client list, including root." msgstr "" #: standalone/drakTermServ:499 #, c-format msgid "In order to enable changes made for thin clients, the display manager must be restarted. Restart now?" msgstr "" #: standalone/drakTermServ:534 #, c-format msgid "Terminal Server Overview" msgstr "" #: standalone/drakTermServ:535 #, c-format msgid "" " - Create Etherboot Enabled Boot Images:\n" " \tTo boot a kernel via etherboot, a special kernel/initrd image must be created.\n" " \tmkinitrd-net does much of this work and drakTermServ is just a graphical \n" " \tinterface to help manage/customize these images. To create the file \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an include in \n" " \tdhcpd.conf, you should create the etherboot images for at least one full kernel." msgstr "" #: standalone/drakTermServ:541 #, c-format msgid "" " - Maintain /etc/dhcpd.conf:\n" " \tTo net boot clients, each client needs a dhcpd.conf entry, assigning an IP \n" " \taddress and net boot images to the machine. drakTermServ helps create/remove \n" " \tthese entries.\n" "\t\t\t\n" " \t(PCI cards may omit the image - etherboot will request the correct image. \n" "\t\t\tYou should also consider that when etherboot looks for the images, it expects \n" "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \tA typical dhcpd.conf stanza to support a diskless client looks like:" msgstr "" #: standalone/drakTermServ:559 #, c-format msgid "" " While you can use a pool of IP addresses, rather than setup a specific entry for\n" " a client machine, using a fixed address scheme facilitates using the functionality\n" " of client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" " Note: The '#type' entry is only used by drakTermServ. Clients can either be 'thin'\n" " or 'fat'. Thin clients run most software on the server via XDMCP, while fat clients run \n" " most software on the client machine. A special inittab, %s is\n" " written for thin clients. System config files xdm-config, kdmrc, and gdm.conf are \n" " modified if thin clients are used, to enable XDMCP. Since there are security issues in \n" " using XDMCP, hosts.deny and hosts.allow are modified to limit access to the local\n" " subnet.\n" "\t\t\t\n" " Note: The '#hdw_config' entry is also only used by drakTermServ. Clients can either \n" " be 'true' or 'false'. 'true' enables root login at the client machine and allows local \n" " hardware configuration of sound, mouse, and X, using the 'drak' tools. This is enabled \n" " by creating separate config files associated with the client's IP address and creating \n" " read/write mount points to allow the client to alter the file. Once you are satisfied \n" " with the configuration, you can remove root login privileges from the client.\n" "\t\t\t\n" " Note: You must stop/start the server after adding or changing clients." msgstr "" #: standalone/drakTermServ:579 #, c-format msgid "" " - Maintain /etc/exports:\n" " \tClusternfs allows export of the root filesystem to diskless clients. drakTermServ\n" " \tsets up the correct entry to allow anonymous access to the root filesystem from\n" " \tdiskless clients.\n" "\n" " \tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" " \tWith SUBNET/MASK being defined for your network." msgstr "" #: standalone/drakTermServ:591 #, c-format msgid "" " - Maintain %s:\n" " \tFor users to be able to log into the system from a diskless client, their entry in\n" " \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" " \thelps in this respect by adding or removing system users from this file." msgstr "" #: standalone/drakTermServ:595 #, c-format msgid "" " - Per client %s:\n" " \tThrough clusternfs, each diskless client can have its own unique configuration files\n" " \ton the root filesystem of the server. By allowing local client hardware configuration, \n" " \tdrakTermServ will help create these files." msgstr "" #: standalone/drakTermServ:600 #, c-format msgid "" " - Per client system configuration files:\n" " \tThrough clusternfs, each diskless client can have its own unique configuration files\n" " \ton the root filesystem of the server. By allowing local client hardware configuration, \n" " \tclients can customize files such as /etc/modules.conf, /etc/sysconfig/mouse, \n" " \t/etc/sysconfig/keyboard on a per-client basis.\n" "\n" " Note: Enabling local client hardware configuration does enable root login to the terminal \n" " server on each client machine that has this feature enabled. Local configuration can be\n" " turned back off, retaining the configuration files, once the client machine is configured." msgstr "" #: standalone/drakTermServ:609 #, c-format msgid "" " - /etc/xinetd.d/tftp:\n" " \tdrakTermServ will configure this file to work in conjunction with the images created\n" " \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up the boot image to \n" " \teach diskless client.\n" "\n" " \tA typical TFTP configuration file looks like:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \tThe changes here from the default installation are changing the disable flag to\n" " \t'no' and changing the directory path to /var/lib/tftpboot, where mkinitrd-net\n" " \tputs its images." msgstr "" #: standalone/drakTermServ:630 #, c-format msgid "" " - Create etherboot floppies/CDs:\n" " \tThe diskless client machines need either ROM images on the NIC, or a boot floppy\n" " \tor CD to initiate the boot sequence. drakTermServ will help generate these\n" " \timages, based on the NIC in the client machine.\n" " \t\t\n" " \tA basic example of creating a boot floppy for a 3Com 3c509 manually:\n" " \t\t\n" " \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0" msgstr "" #: standalone/drakTermServ:663 #, c-format msgid "Boot Floppy" msgstr "" #: standalone/drakTermServ:665 #, c-format msgid "Boot ISO" msgstr "" #: standalone/drakTermServ:667 #, c-format msgid "PXE Image" msgstr "" #: standalone/drakTermServ:728 #, c-format msgid "Default kernel version" msgstr "" #: standalone/drakTermServ:731 #, c-format msgid "Create PXE images." msgstr "" #: standalone/drakTermServ:757 #, c-format msgid "Install i586 kernel for older clients" msgstr "" #: standalone/drakTermServ:767 #, c-format msgid "Build Whole Kernel -->" msgstr "" #: standalone/drakTermServ:774 #, c-format msgid "No kernel selected!" msgstr "" #: standalone/drakTermServ:777 #, c-format msgid "Build Single NIC -->" msgstr "" #: standalone/drakTermServ:781 #, c-format msgid "No NIC selected!" msgstr "" #: standalone/drakTermServ:784 #, c-format msgid "Build All Kernels -->" msgstr "" #: standalone/drakTermServ:797 #, c-format msgid "<-- Delete" msgstr "" #: standalone/drakTermServ:802 #, c-format msgid "No image selected!" msgstr "" #: standalone/drakTermServ:805 #, c-format msgid "Delete All NBIs" msgstr "" #: standalone/drakTermServ:880 #, c-format msgid "Building images for kernel:" msgstr "" #: standalone/drakTermServ:1004 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" #: standalone/drakTermServ:1009 #, c-format msgid "Add User -->" msgstr "" #: standalone/drakTermServ:1015 #, c-format msgid "<-- Del User" msgstr "" #: standalone/drakTermServ:1051 #, c-format msgid "type: %s" msgstr "" #: standalone/drakTermServ:1055 #, c-format msgid "local config: %s" msgstr "" #: standalone/drakTermServ:1086 #, c-format msgid "" "Allow local hardware\n" "configuration." msgstr "" #: standalone/drakTermServ:1095 #, c-format msgid "No net boot images created!" msgstr "" #: standalone/drakTermServ:1114 #, c-format msgid "Thin Client" msgstr "" #: standalone/drakTermServ:1118 #, c-format msgid "Allow Thin Clients" msgstr "" #: standalone/drakTermServ:1119 #, c-format msgid "" "Sync client X keyboard\n" " settings with server." msgstr "" #: standalone/drakTermServ:1120 #, c-format msgid "Add Client -->" msgstr "" #: standalone/drakTermServ:1134 #, c-format msgid "type: fat" msgstr "" #: standalone/drakTermServ:1135 #, c-format msgid "type: thin" msgstr "" #: standalone/drakTermServ:1142 #, c-format msgid "local config: false" msgstr "" #: standalone/drakTermServ:1143 #, c-format msgid "local config: true" msgstr "" #: standalone/drakTermServ:1151 #, c-format msgid "<-- Edit Client" msgstr "" #: standalone/drakTermServ:1176 #, c-format msgid "Disable Local Config" msgstr "" #: standalone/drakTermServ:1183 #, c-format msgid "Delete Client" msgstr "" #: standalone/drakTermServ:1205 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" #: standalone/drakTermServ:1250 #, c-format msgid "Thin clients will not work with autologin. Disable autologin?" msgstr "" #: standalone/drakTermServ:1266 #, c-format msgid "All clients will use %s" msgstr "" #: standalone/drakTermServ:1300 #, c-format msgid "Subnet:" msgstr "" #: standalone/drakTermServ:1307 #, c-format msgid "Netmask:" msgstr "" #: standalone/drakTermServ:1314 #, c-format msgid "Routers:" msgstr "" #: standalone/drakTermServ:1321 #, c-format msgid "Subnet Mask:" msgstr "" #: standalone/drakTermServ:1328 #, c-format msgid "Broadcast Address:" msgstr "" #: standalone/drakTermServ:1335 #, c-format msgid "Domain Name:" msgstr "" #: standalone/drakTermServ:1343 #, c-format msgid "Name Servers:" msgstr "" #: standalone/drakTermServ:1354 #, c-format msgid "IP Range Start:" msgstr "" #: standalone/drakTermServ:1355 #, c-format msgid "IP Range End:" msgstr "" #: standalone/drakTermServ:1397 #, c-format msgid "Append TS Includes To Existing Config" msgstr "" #: standalone/drakTermServ:1399 #, c-format msgid "Write Config" msgstr "" #: standalone/drakTermServ:1415 #, c-format msgid "dhcpd Server Configuration" msgstr "" #: standalone/drakTermServ:1416 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" #: standalone/drakTermServ:1419 #, c-format msgid "" "Dynamic IP Address Pool\n" "(needed for PXE clients):" msgstr "" #: standalone/drakTermServ:1572 #, c-format msgid "Write to %s failed!" msgstr "" #: standalone/drakTermServ:1584 #, c-format msgid "Please insert floppy disk:" msgstr "" #: standalone/drakTermServ:1588 #, c-format msgid "Could not access the floppy!" msgstr "" #: standalone/drakTermServ:1590 #, c-format msgid "Floppy can be removed now" msgstr "" #: standalone/drakTermServ:1593 #, c-format msgid "No floppy drive available!" msgstr "" #: standalone/drakTermServ:1599 #, c-format msgid "PXE image is %s/%s" msgstr "" #: standalone/drakTermServ:1601 #, c-format msgid "Error writing %s/%s" msgstr "" #: standalone/drakTermServ:1611 #, c-format msgid "Etherboot ISO image is %s" msgstr "" #: standalone/drakTermServ:1613 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "" #: standalone/drakTermServ:1634 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "" #: standalone/drakTermServ:1793 #, c-format msgid "" "%s passwd bad in Terminal Server - rewriting...\n" "" msgstr "" #: standalone/drakTermServ:1806 #, c-format msgid "" "%s is not a user..\n" "" msgstr "" #: standalone/drakTermServ:1807 #, c-format msgid "" "%s is already a Terminal Server user\n" "" msgstr "" #: standalone/drakTermServ:1809 #, c-format msgid "" "Addition of %s to Terminal Server failed!\n" "" msgstr "" #: standalone/drakTermServ:1811 #, c-format msgid "" "%s added to Terminal Server\n" "" msgstr "" #: standalone/drakTermServ:1828 #, c-format msgid "" "Deleted %s...\n" "" msgstr "" #: standalone/drakTermServ:1830 standalone/drakTermServ:1903 #, c-format msgid "" "%s not found...\n" "" msgstr "" #: standalone/drakTermServ:1931 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" #: standalone/drakTermServ:2071 #, c-format msgid "Configuration changed - restart clusternfs/dhcpd?" msgstr "" #: standalone/drakautoinst:38 standalone/drakhosts:123 standalone/drakhosts:129 standalone/draknfs:84 standalone/draknfs:105 standalone/draknfs:444 standalone/draknfs:447 standalone/draknfs:539 standalone/draknfs:546 standalone/draksambashare:181 standalone/draksambashare:202 standalone/draksambashare:625 standalone/draksambashare:792 #, c-format msgid "Error!" msgstr "" #: standalone/drakautoinst:39 #, c-format msgid "I can not find needed image file `%s'." msgstr "" #: standalone/drakautoinst:41 #, c-format msgid "Auto Install Configurator" msgstr "" #: standalone/drakautoinst:42 #, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've performed on this computer, being interactively prompted for some steps, in order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed automatically, whatever you chose during the install of this computer.\n" "\n" "Press ok to continue." msgstr "" #: standalone/drakautoinst:60 #, c-format msgid "replay" msgstr "" #: standalone/drakautoinst:60 standalone/drakautoinst:69 #, c-format msgid "manual" msgstr "" #: standalone/drakautoinst:64 #, c-format msgid "Automatic Steps Configuration" msgstr "" #: standalone/drakautoinst:65 #, c-format msgid "Please choose for each step whether it will replay like your install, or it will be manual" msgstr "" #: standalone/drakautoinst:77 standalone/drakautoinst:78 standalone/drakautoinst:92 #, c-format msgid "Creating auto install floppy" msgstr "" #: standalone/drakautoinst:90 #, c-format msgid "Insert another blank floppy in drive %s (for drivers disk)" msgstr "" #: standalone/drakautoinst:91 #, c-format msgid "Creating auto install floppy (drivers disk)" msgstr "" #: standalone/drakautoinst:156 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" #: standalone/drakautoinst:251 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" #: standalone/drakautoinst:287 #, c-format msgid "Auto Install" msgstr "" #: standalone/drakautoinst:356 #, c-format msgid "Add an item" msgstr "" #: standalone/drakautoinst:363 #, c-format msgid "Remove the last item" msgstr "" #: standalone/drakbackup:153 #, c-format msgid "Expect is an extension to the TCL scripting language that allows interactive sessions without user intervention." msgstr "" #: standalone/drakbackup:154 #, c-format msgid "Store the password for this system in drakbackup configuration." msgstr "" #: standalone/drakbackup:155 #, c-format msgid "For a multisession CD, only the first session will erase the cdrw. Otherwise the cdrw is erased before each backup." msgstr "" #: standalone/drakbackup:156 #, c-format msgid "This option will save files that have changed. Exact behavior depends on whether incremental or differential mode is used." msgstr "" #: standalone/drakbackup:157 #, c-format msgid "Incremental backups only save files that have changed or are new since the last backup." msgstr "" #: standalone/drakbackup:158 #, c-format msgid "Differential backups only save files that have changed or are new since the original 'base' backup." msgstr "" #: standalone/drakbackup:159 #, c-format msgid "This should be a local user or email address that you want the backup results sent to. You will need to define a functioning mail server." msgstr "" #: standalone/drakbackup:160 #, c-format msgid "This should be the return address that you want the backup results sent from. Default is drakbackup." msgstr "" #: standalone/drakbackup:161 #, c-format msgid "Files or wildcards listed in a .backupignore file at the top of a directory tree will not be backed up." msgstr "" #: standalone/drakbackup:162 #, c-format msgid "For backups to other media, files are still created on the hard drive, then moved to the other media. Enabling this option will remove the hard drive tar files after the backup." msgstr "" #: standalone/drakbackup:163 #, c-format msgid "Some protocols, like rsync, may be configured at the server end. Rather than using a directory path, you would use the 'module' name for the service path." msgstr "" #: standalone/drakbackup:164 #, c-format msgid "Custom allows you to specify your own day and time. The other options use run-parts in /etc/crontab." msgstr "" #: standalone/drakbackup:327 #, c-format msgid "No media selected for cron operation." msgstr "" #: standalone/drakbackup:331 #, c-format msgid "No interval selected for cron operation." msgstr "" #: standalone/drakbackup:378 #, c-format msgid "Interval cron not available as non-root" msgstr "" #: standalone/drakbackup:465 standalone/logdrake:440 #, c-format msgid "\"%s\" neither is a valid email nor is an existing local user!" msgstr "" #: standalone/drakbackup:469 standalone/logdrake:445 #, c-format msgid "\"%s\" is a local user, but you did not select a local smtp, so you must use a complete email address!" msgstr "" #: standalone/drakbackup:478 #, c-format msgid "Valid user list changed, rewriting config file." msgstr "" #: standalone/drakbackup:480 #, c-format msgid "" "Old user list:\n" "" msgstr "" #: standalone/drakbackup:482 #, c-format msgid "" "New user list:\n" "" msgstr "" #: standalone/drakbackup:511 #, c-format msgid "" "\n" " DrakBackup Report \n" "" msgstr "" #: standalone/drakbackup:512 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" "" msgstr "" #: standalone/drakbackup:518 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" "" msgstr "" #: standalone/drakbackup:543 standalone/drakbackup:614 standalone/drakbackup:670 #, c-format msgid "Total progress" msgstr "" #: standalone/drakbackup:596 #, c-format msgid "" "%s exists, delete?\n" "\n" "If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" #: standalone/drakbackup:605 #, c-format msgid "This may take a moment to generate the keys." msgstr "" #: standalone/drakbackup:612 #, c-format msgid "Cannot spawn %s." msgstr "" #: standalone/drakbackup:629 #, c-format msgid "No password prompt on %s at port %s" msgstr "" #: standalone/drakbackup:630 #, c-format msgid "Bad password on %s" msgstr "" #: standalone/drakbackup:631 #, c-format msgid "Permission denied transferring %s to %s" msgstr "" #: standalone/drakbackup:632 #, c-format msgid "Can not find %s on %s" msgstr "" #: standalone/drakbackup:636 #, c-format msgid "%s not responding" msgstr "" #: standalone/drakbackup:640 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s@%s\n" "\n" "without being prompted for a password." msgstr "" #: standalone/drakbackup:690 #, c-format msgid "No CD-R/DVD-R in drive!" msgstr "" #: standalone/drakbackup:694 #, c-format msgid "Does not appear to be recordable media!" msgstr "" #: standalone/drakbackup:699 #, c-format msgid "Not erasable media!" msgstr "" #: standalone/drakbackup:741 #, c-format msgid "This may take a moment to erase the media." msgstr "" #: standalone/drakbackup:799 #, c-format msgid "Permission problem accessing CD." msgstr "" #: standalone/drakbackup:826 #, c-format msgid "No tape in %s!" msgstr "" #: standalone/drakbackup:935 #, c-format msgid "" "Backup destination quota exceeded!\n" "%d MB used vs %d MB allocated." msgstr "" #: standalone/drakbackup:954 standalone/drakbackup:986 #, c-format msgid "Backup system files..." msgstr "" #: standalone/drakbackup:987 standalone/drakbackup:1027 #, c-format msgid "Hard Disk Backup files..." msgstr "" #: standalone/drakbackup:1026 #, c-format msgid "Backup User files..." msgstr "" #: standalone/drakbackup:1060 #, c-format msgid "Backup Other files..." msgstr "" #: standalone/drakbackup:1061 #, c-format msgid "Hard Disk Backup Progress..." msgstr "" #: standalone/drakbackup:1066 #, c-format msgid "No changes to backup!" msgstr "" #: standalone/drakbackup:1083 standalone/drakbackup:1106 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" "" msgstr "" #: standalone/drakbackup:1092 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by FTP.\n" "" msgstr "" #: standalone/drakbackup:1093 #, c-format msgid "Error during sending file via FTP. Please correct your FTP configuration." msgstr "" #: standalone/drakbackup:1095 #, c-format msgid "" "file list sent by FTP: %s\n" "" msgstr "" #: standalone/drakbackup:1111 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" "" msgstr "" #: standalone/drakbackup:1116 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" "" msgstr "" #: standalone/drakbackup:1125 #, c-format msgid "Error sending mail. Your report mail was not sent." msgstr "" #: standalone/drakbackup:1126 #, c-format msgid "" " Error while sending mail. \n" "" msgstr "" #: standalone/drakbackup:1156 #, c-format msgid "Can not create catalog!" msgstr "" #: standalone/drakbackup:1397 #, c-format msgid "" "\n" "Please check all options that you need.\n" "" msgstr "" #: standalone/drakbackup:1398 #, c-format msgid "" "These options can backup and restore all files in your /etc directory.\n" "" msgstr "" #: standalone/drakbackup:1399 #, c-format msgid "Backup your System files. (/etc directory)" msgstr "" #: standalone/drakbackup:1400 standalone/drakbackup:1464 standalone/drakbackup:1530 #, c-format msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "" #: standalone/drakbackup:1402 standalone/drakbackup:1466 standalone/drakbackup:1532 #, c-format msgid "Use Incremental Backups" msgstr "" #: standalone/drakbackup:1402 standalone/drakbackup:1466 standalone/drakbackup:1532 #, c-format msgid "Use Differential Backups" msgstr "" #: standalone/drakbackup:1404 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "" #: standalone/drakbackup:1405 #, c-format msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" #: standalone/drakbackup:1436 #, c-format msgid "Please check all users that you want to include in your backup." msgstr "" #: standalone/drakbackup:1463 #, c-format msgid "Do not include the browser cache" msgstr "" #: standalone/drakbackup:1517 #, c-format msgid "Select the files or directories and click on 'OK'" msgstr "" #: standalone/drakbackup:1518 standalone/drakfont:656 #, c-format msgid "Remove Selected" msgstr "" #: standalone/drakbackup:1581 #, c-format msgid "Users" msgstr "" #: standalone/drakbackup:1601 #, c-format msgid "Use network connection to backup" msgstr "" #: standalone/drakbackup:1603 #, c-format msgid "Net Method:" msgstr "" #: standalone/drakbackup:1607 #, c-format msgid "Use Expect for SSH" msgstr "" #: standalone/drakbackup:1608 #, c-format msgid "Create/Transfer backup keys for SSH" msgstr "" #: standalone/drakbackup:1610 #, c-format msgid "Transfer Now" msgstr "" #: standalone/drakbackup:1612 #, c-format msgid "Other (not drakbackup) keys in place already" msgstr "" #: standalone/drakbackup:1615 #, c-format msgid "Host name or IP." msgstr "" #: standalone/drakbackup:1620 #, c-format msgid "Directory (or module) to put the backup on this host." msgstr "" #: standalone/drakbackup:1632 #, c-format msgid "Remember this password" msgstr "" #: standalone/drakbackup:1648 #, c-format msgid "Need hostname, username and password!" msgstr "" #: standalone/drakbackup:1739 #, c-format msgid "Use CD-R/DVD-R to backup" msgstr "" #: standalone/drakbackup:1742 #, c-format msgid "Choose your CD/DVD device" msgstr "" #: standalone/drakbackup:1747 #, c-format msgid "Choose your CD/DVD media size" msgstr "" #: standalone/drakbackup:1754 #, c-format msgid "Multisession CD" msgstr "" #: standalone/drakbackup:1756 #, c-format msgid "CDRW media" msgstr "" #: standalone/drakbackup:1762 #, c-format msgid "Erase your RW media (1st Session)" msgstr "" #: standalone/drakbackup:1763 #, c-format msgid " Erase Now " msgstr "" #: standalone/drakbackup:1769 #, c-format msgid "DVD+RW media" msgstr "" #: standalone/drakbackup:1771 #, c-format msgid "DVD-R media" msgstr "" #: standalone/drakbackup:1773 #, c-format msgid "DVDRAM device" msgstr "" #: standalone/drakbackup:1804 #, c-format msgid "No CD device defined!" msgstr "" #: standalone/drakbackup:1846 #, c-format msgid "Use tape to backup" msgstr "" #: standalone/drakbackup:1849 #, c-format msgid "Device name to use for backup" msgstr "" #: standalone/drakbackup:1855 #, c-format msgid "Backup directly to tape" msgstr "" #: standalone/drakbackup:1861 #, c-format msgid "Use tape hardware compression (EXPERIMENTAL)" msgstr "" #: standalone/drakbackup:1867 #, c-format msgid "Do not rewind tape after backup" msgstr "" #: standalone/drakbackup:1873 #, c-format msgid "Erase tape before backup" msgstr "" #: standalone/drakbackup:1879 #, c-format msgid "Eject tape after the backup" msgstr "" #: standalone/drakbackup:1960 #, c-format msgid "Enter the directory to save to:" msgstr "" #: standalone/drakbackup:1964 #, c-format msgid "Directory to save to" msgstr "" #: standalone/drakbackup:1969 #, c-format msgid "" "Maximum disk space\n" " allocated for backups (MB)" msgstr "" #: standalone/drakbackup:1973 #, c-format msgid "" "Delete incremental or differential\n" " backups older than N days\n" " (0 is keep all backups) to save space" msgstr "" #: standalone/drakbackup:2040 #, c-format msgid "CD-R / DVD-R" msgstr "" #: standalone/drakbackup:2045 #, c-format msgid "HardDrive / NFS" msgstr "" #: standalone/drakbackup:2060 standalone/drakbackup:2061 standalone/drakbackup:2066 #, c-format msgid "hourly" msgstr "" #: standalone/drakbackup:2060 standalone/drakbackup:2062 standalone/drakbackup:2067 #, c-format msgid "daily" msgstr "" #: standalone/drakbackup:2060 standalone/drakbackup:2063 standalone/drakbackup:2068 #, c-format msgid "weekly" msgstr "" #: standalone/drakbackup:2060 standalone/drakbackup:2064 standalone/drakbackup:2069 #, c-format msgid "monthly" msgstr "" #: standalone/drakbackup:2060 standalone/drakbackup:2065 standalone/drakbackup:2070 #, c-format msgid "custom" msgstr "" #: standalone/drakbackup:2074 #, c-format msgid "January" msgstr "" #: standalone/drakbackup:2074 #, c-format msgid "February" msgstr "" #: standalone/drakbackup:2074 #, c-format msgid "March" msgstr "" #: standalone/drakbackup:2075 #, c-format msgid "April" msgstr "" #: standalone/drakbackup:2075 #, c-format msgid "May" msgstr "" #: standalone/drakbackup:2075 #, c-format msgid "June" msgstr "" #: standalone/drakbackup:2075 #, c-format msgid "July" msgstr "" #: standalone/drakbackup:2075 #, c-format msgid "August" msgstr "" #: standalone/drakbackup:2075 #, c-format msgid "September" msgstr "" #: standalone/drakbackup:2076 #, c-format msgid "October" msgstr "" #: standalone/drakbackup:2076 #, c-format msgid "November" msgstr "" #: standalone/drakbackup:2076 #, c-format msgid "December" msgstr "" #: standalone/drakbackup:2079 #, c-format msgid "Sunday" msgstr "" #: standalone/drakbackup:2079 #, c-format msgid "Monday" msgstr "" #: standalone/drakbackup:2079 #, c-format msgid "Tuesday" msgstr "" #: standalone/drakbackup:2080 #, c-format msgid "Wednesday" msgstr "" #: standalone/drakbackup:2080 #, c-format msgid "Thursday" msgstr "" #: standalone/drakbackup:2080 #, c-format msgid "Friday" msgstr "" #: standalone/drakbackup:2080 #, c-format msgid "Saturday" msgstr "" #: standalone/drakbackup:2112 #, c-format msgid "Use daemon" msgstr "" #: standalone/drakbackup:2116 #, c-format msgid "Please choose the time interval between each backup" msgstr "" #: standalone/drakbackup:2122 #, c-format msgid "Custom setup/crontab entry:" msgstr "" #: standalone/drakbackup:2127 #, c-format msgid "Minute" msgstr "" #: standalone/drakbackup:2131 #, c-format msgid "Hour" msgstr "" #: standalone/drakbackup:2135 #, c-format msgid "Day" msgstr "" #: standalone/drakbackup:2139 #, c-format msgid "Month" msgstr "" #: standalone/drakbackup:2143 #, c-format msgid "Weekday" msgstr "" #: standalone/drakbackup:2149 #, c-format msgid "Please choose the media for backup." msgstr "" #: standalone/drakbackup:2155 #, c-format msgid "Please be sure that the cron daemon is included in your services." msgstr "" #: standalone/drakbackup:2156 #, c-format msgid "If your machine is not on all the time, you might want to install anacron." msgstr "" #: standalone/drakbackup:2157 #, c-format msgid "Note that currently all 'net' media also use the hard drive." msgstr "" #: standalone/drakbackup:2204 #, c-format msgid "Please choose the compression type" msgstr "" #: standalone/drakbackup:2208 #, c-format msgid "Use .backupignore files" msgstr "" #: standalone/drakbackup:2210 #, c-format msgid "Send mail report after each backup to:" msgstr "" #: standalone/drakbackup:2216 #, c-format msgid "Return address for sent mail:" msgstr "" #: standalone/drakbackup:2222 #, c-format msgid "SMTP server for mail:" msgstr "" #: standalone/drakbackup:2227 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "" #: standalone/drakbackup:2270 #, c-format msgid "What" msgstr "" #: standalone/drakbackup:2275 #, c-format msgid "Where" msgstr "" #: standalone/drakbackup:2280 #, c-format msgid "When" msgstr "" #: standalone/drakbackup:2285 #, c-format msgid "More Options" msgstr "" #: standalone/drakbackup:2298 #, c-format msgid "Backup destination not configured..." msgstr "" #: standalone/drakbackup:2318 standalone/drakbackup:4242 #, c-format msgid "Drakbackup Configuration" msgstr "" #: standalone/drakbackup:2334 #, c-format msgid "Please choose where you want to backup" msgstr "" #: standalone/drakbackup:2337 #, c-format msgid "Hard Drive used to prepare backups for all media" msgstr "" #: standalone/drakbackup:2337 #, c-format msgid "Across Network" msgstr "" #: standalone/drakbackup:2337 #, c-format msgid "On CD-R" msgstr "" #: standalone/drakbackup:2337 #, c-format msgid "On Tape Device" msgstr "" #: standalone/drakbackup:2383 #, c-format msgid "Backup Users" msgstr "" #: standalone/drakbackup:2384 #, c-format msgid " (Default is all users)" msgstr "" #: standalone/drakbackup:2397 #, c-format msgid "Please choose what you want to backup" msgstr "" #: standalone/drakbackup:2398 #, c-format msgid "Backup System" msgstr "" #: standalone/drakbackup:2400 #, c-format msgid "Select user manually" msgstr "" #: standalone/drakbackup:2429 #, c-format msgid "Please select data to backup..." msgstr "" #: standalone/drakbackup:2501 #, c-format msgid "" "\n" "Backup Sources: \n" "" msgstr "" #: standalone/drakbackup:2502 #, c-format msgid "" "\n" "- System Files:\n" "" msgstr "" #: standalone/drakbackup:2504 #, c-format msgid "" "\n" "- User Files:\n" "" msgstr "" #: standalone/drakbackup:2506 #, c-format msgid "" "\n" "- Other Files:\n" "" msgstr "" #: standalone/drakbackup:2508 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" "" msgstr "" #: standalone/drakbackup:2509 #, c-format msgid "" "\tLimit disk usage to %s MB\n" "" msgstr "" #: standalone/drakbackup:2510 #, c-format msgid "" "\tDelete backups older than %s day(s)\n" "" msgstr "" #: standalone/drakbackup:2513 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" "" msgstr "" #: standalone/drakbackup:2518 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" #: standalone/drakbackup:2519 #, c-format msgid "RW" msgstr "" #: standalone/drakbackup:2520 #, c-format msgid " on device: %s" msgstr "" #: standalone/drakbackup:2521 #, c-format msgid " (multi-session)" msgstr "" #: standalone/drakbackup:2522 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" #: standalone/drakbackup:2523 #, c-format msgid "\t\tErase=%s" msgstr "" #: standalone/drakbackup:2525 #, c-format msgid "" "\tBackup directly to Tape\n" "" msgstr "" #: standalone/drakbackup:2527 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" "" msgstr "" #: standalone/drakbackup:2528 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" "" msgstr "" #: standalone/drakbackup:2529 #, c-format msgid "" "\n" "- Options:\n" "" msgstr "" #: standalone/drakbackup:2530 #, c-format msgid "" "\tDo not include System Files\n" "" msgstr "" #: standalone/drakbackup:2532 #, c-format msgid "" "\tBackups use tar and bzip2\n" "" msgstr "" #: standalone/drakbackup:2533 #, c-format msgid "" "\tBackups use tar and gzip\n" "" msgstr "" #: standalone/drakbackup:2534 #, c-format msgid "" "\tBackups use tar only\n" "" msgstr "" #: standalone/drakbackup:2536 #, c-format msgid "" "\tUse .backupignore files\n" "" msgstr "" #: standalone/drakbackup:2537 #, c-format msgid "" "\tSend mail to %s\n" "" msgstr "" #: standalone/drakbackup:2538 #, c-format msgid "" "\tSend mail from %s\n" "" msgstr "" #: standalone/drakbackup:2539 #, c-format msgid "" "\tUsing SMTP server %s\n" "" msgstr "" #: standalone/drakbackup:2541 #, c-format msgid "" "\n" "- Daemon, %s via:\n" "" msgstr "" #: standalone/drakbackup:2542 #, c-format msgid "" "\t-Hard drive.\n" "" msgstr "" #: standalone/drakbackup:2543 #, c-format msgid "" "\t-CD-R.\n" "" msgstr "" #: standalone/drakbackup:2544 #, c-format msgid "" "\t-Tape \n" "" msgstr "" #: standalone/drakbackup:2545 #, c-format msgid "" "\t-Network by FTP.\n" "" msgstr "" #: standalone/drakbackup:2546 #, c-format msgid "" "\t-Network by SSH.\n" "" msgstr "" #: standalone/drakbackup:2547 #, c-format msgid "" "\t-Network by rsync.\n" "" msgstr "" #: standalone/drakbackup:2549 #, c-format msgid "" "No configuration, please click Wizard or Advanced.\n" "" msgstr "" #: standalone/drakbackup:2554 #, c-format msgid "" "List of data to restore:\n" "\n" "" msgstr "" #: standalone/drakbackup:2556 #, c-format msgid "" "- Restore System Files.\n" "" msgstr "" #: standalone/drakbackup:2558 standalone/drakbackup:2568 #, c-format msgid "" " - from date: %s %s\n" "" msgstr "" #: standalone/drakbackup:2561 #, c-format msgid "" "- Restore User Files: \n" "" msgstr "" #: standalone/drakbackup:2566 #, c-format msgid "" "- Restore Other Files: \n" "" msgstr "" #: standalone/drakbackup:2745 #, c-format msgid "" "List of data corrupted:\n" "\n" "" msgstr "" #: standalone/drakbackup:2747 #, c-format msgid "Please uncheck or remove it on next time." msgstr "" #: standalone/drakbackup:2757 #, c-format msgid "Backup files are corrupted" msgstr "" #: standalone/drakbackup:2778 #, c-format msgid " All of your selected data have been " msgstr "" #: standalone/drakbackup:2779 #, c-format msgid " Successfully Restored on %s " msgstr "" #: standalone/drakbackup:2899 #, c-format msgid " Restore Configuration " msgstr "" #: standalone/drakbackup:2927 #, c-format msgid "OK to restore the other files." msgstr "" #: standalone/drakbackup:2943 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "" #: standalone/drakbackup:3008 #, c-format msgid "Please choose the date to restore:" msgstr "" #: standalone/drakbackup:3045 #, c-format msgid "Restore from Hard Disk." msgstr "" #: standalone/drakbackup:3047 #, c-format msgid "Enter the directory where backups are stored" msgstr "" #: standalone/drakbackup:3051 #, c-format msgid "Directory with backups" msgstr "" #: standalone/drakbackup:3105 #, c-format msgid "Select another media to restore from" msgstr "" #: standalone/drakbackup:3107 #, c-format msgid "Other Media" msgstr "" #: standalone/drakbackup:3112 #, c-format msgid "Restore system" msgstr "" #: standalone/drakbackup:3113 #, c-format msgid "Restore Users" msgstr "" #: standalone/drakbackup:3114 #, c-format msgid "Restore Other" msgstr "" #: standalone/drakbackup:3116 #, c-format msgid "Select path to restore (instead of /)" msgstr "" #: standalone/drakbackup:3120 standalone/drakbackup:3402 #, c-format msgid "Path To Restore To" msgstr "" #: standalone/drakbackup:3123 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "" #: standalone/drakbackup:3125 #, c-format msgid "Remove user directories before restore." msgstr "" #: standalone/drakbackup:3210 #, c-format msgid "Filename text substring to search for (empty string matches all):" msgstr "" #: standalone/drakbackup:3213 #, c-format msgid "Search Backups" msgstr "" #: standalone/drakbackup:3231 #, c-format msgid "No matches found..." msgstr "" #: standalone/drakbackup:3235 #, c-format msgid "Restore Selected" msgstr "" #: standalone/drakbackup:3370 #, c-format msgid "" "Click date/time to see backup files.\n" "Ctrl-Click files to select multiple files." msgstr "" #: standalone/drakbackup:3376 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" #: standalone/drakbackup:3385 #, c-format msgid "" "Restore Selected\n" "Files" msgstr "" #: standalone/drakbackup:3462 #, c-format msgid "Backup files not found at %s." msgstr "" #: standalone/drakbackup:3475 #, c-format msgid "Restore From CD" msgstr "" #: standalone/drakbackup:3475 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" #: standalone/drakbackup:3477 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "" #: standalone/drakbackup:3487 #, c-format msgid "Restore From Tape" msgstr "" #: standalone/drakbackup:3487 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" #: standalone/drakbackup:3489 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "" #: standalone/drakbackup:3500 #, c-format msgid "Restore Via Network" msgstr "" #: standalone/drakbackup:3500 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "" #: standalone/drakbackup:3501 #, c-format msgid "Host Name" msgstr "" #: standalone/drakbackup:3502 #, c-format msgid "Host Path or Module" msgstr "" #: standalone/drakbackup:3509 #, c-format msgid "Password required" msgstr "" #: standalone/drakbackup:3515 #, c-format msgid "Username required" msgstr "" #: standalone/drakbackup:3518 #, c-format msgid "Hostname required" msgstr "" #: standalone/drakbackup:3523 #, c-format msgid "Path or Module required" msgstr "" #: standalone/drakbackup:3536 #, c-format msgid "Files Restored..." msgstr "" #: standalone/drakbackup:3539 #, c-format msgid "Restore Failed..." msgstr "" #: standalone/drakbackup:3557 #, c-format msgid "%s not retrieved..." msgstr "" #: standalone/drakbackup:3778 standalone/drakbackup:3847 #, c-format msgid "Search for files to restore" msgstr "" #: standalone/drakbackup:3782 #, c-format msgid "Restore all backups" msgstr "" #: standalone/drakbackup:3790 #, c-format msgid "Custom Restore" msgstr "" #: standalone/drakbackup:3794 standalone/drakbackup:3843 #, c-format msgid "Restore From Catalog" msgstr "" #: standalone/drakbackup:3815 #, c-format msgid "" "Unable to find backups to restore...\n" "" msgstr "" #: standalone/drakbackup:3816 #, c-format msgid "Verify that %s is the correct path" msgstr "" #: standalone/drakbackup:3817 #, c-format msgid " and the CD is in the drive" msgstr "" #: standalone/drakbackup:3819 #, c-format msgid "Backups on unmountable media - Use Catalog to restore" msgstr "" #: standalone/drakbackup:3835 #, c-format msgid "CD in place - continue." msgstr "" #: standalone/drakbackup:3840 #, c-format msgid "Browse to new restore repository." msgstr "" #: standalone/drakbackup:3841 #, c-format msgid "Directory To Restore From" msgstr "" #: standalone/drakbackup:3877 #, c-format msgid "Restore Progress" msgstr "" #: standalone/drakbackup:3988 #, c-format msgid "Build Backup" msgstr "" #: standalone/drakbackup:4021 standalone/drakbackup:4341 #, c-format msgid "Restore" msgstr "" #: standalone/drakbackup:4136 #, c-format msgid "Please select data to restore..." msgstr "" #: standalone/drakbackup:4176 #, c-format msgid "Backup system files" msgstr "" #: standalone/drakbackup:4179 #, c-format msgid "Backup user files" msgstr "" #: standalone/drakbackup:4182 #, c-format msgid "Backup other files" msgstr "" #: standalone/drakbackup:4185 standalone/drakbackup:4219 #, c-format msgid "Total Progress" msgstr "" #: standalone/drakbackup:4211 #, c-format msgid "Sending files by FTP" msgstr "" #: standalone/drakbackup:4214 #, c-format msgid "Sending files..." msgstr "" #: standalone/drakbackup:4284 #, c-format msgid "Backup Now from configuration file" msgstr "" #: standalone/drakbackup:4289 #, c-format msgid "View Backup Configuration." msgstr "" #: standalone/drakbackup:4315 #, c-format msgid "Wizard Configuration" msgstr "" #: standalone/drakbackup:4320 #, c-format msgid "Advanced Configuration" msgstr "" #: standalone/drakbackup:4325 #, c-format msgid "View Configuration" msgstr "" #: standalone/drakbackup:4329 #, c-format msgid "View Last Log" msgstr "" #: standalone/drakbackup:4334 #, c-format msgid "Backup Now" msgstr "" #: standalone/drakbackup:4338 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" #: standalone/drakbackup:4358 standalone/drakbackup:4361 #, c-format msgid "Drakbackup" msgstr "" #: standalone/drakboot:49 #, c-format msgid "No bootloader found, creating a new configuration" msgstr "" #: standalone/drakboot:84 standalone/harddrake2:190 standalone/harddrake2:191 standalone/harddrake2:192 standalone/logdrake:69 standalone/printerdrake:150 standalone/printerdrake:151 standalone/printerdrake:152 #, c-format msgid "/_File" msgstr "" #: standalone/drakboot:85 standalone/logdrake:75 #, c-format msgid "/File/_Quit" msgstr "" #: standalone/drakboot:85 standalone/harddrake2:192 standalone/logdrake:75 standalone/printerdrake:152 #, c-format msgid "Q" msgstr "" #: standalone/drakboot:125 #, c-format msgid "Text only" msgstr "" #: standalone/drakboot:126 #, c-format msgid "Verbose" msgstr "" #: standalone/drakboot:127 #, c-format msgid "Silent" msgstr "" #: standalone/drakboot:134 #, c-format msgid "Your system bootloader is not in framebuffer mode. To activate graphical boot, select a graphic video mode from the bootloader configuration tool." msgstr "" #: standalone/drakboot:135 #, c-format msgid "Do you want to configure it now?" msgstr "" #: standalone/drakboot:144 #, c-format msgid "Install themes" msgstr "" #: standalone/drakboot:146 #, c-format msgid "Graphical boot theme selection" msgstr "" #: standalone/drakboot:149 #, c-format msgid "Graphical boot mode:" msgstr "" #: standalone/drakboot:151 #, c-format msgid "Theme" msgstr "" #: standalone/drakboot:154 #, c-format msgid "" "Display theme\n" "under console" msgstr "" #: standalone/drakboot:159 #, c-format msgid "Create new theme" msgstr "" #: standalone/drakboot:191 #, c-format msgid "Default user" msgstr "" #: standalone/drakboot:192 #, c-format msgid "Default desktop" msgstr "" #: standalone/drakboot:195 #, c-format msgid "No, I do not want autologin" msgstr "" #: standalone/drakboot:196 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "" #: standalone/drakboot:203 #, c-format msgid "System mode" msgstr "" #: standalone/drakboot:206 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "" #: standalone/drakboot:272 #, c-format msgid "" "Please choose a video mode, it will be applied to each of the boot entries selected below.\n" "Be sure your video card supports the mode you choose." msgstr "" #: standalone/drakbug:41 #, c-format msgid "Mandriva Linux Bug Report Tool" msgstr "" #: standalone/drakbug:46 #, c-format msgid "Mandriva Linux Control Center" msgstr "" #: standalone/drakbug:48 #, c-format msgid "Synchronization tool" msgstr "" #: standalone/drakbug:49 standalone/drakbug:152 #, c-format msgid "Standalone Tools" msgstr "" #: standalone/drakbug:50 #, c-format msgid "HardDrake" msgstr "" #: standalone/drakbug:51 #, c-format msgid "Mandriva Online" msgstr "" #: standalone/drakbug:52 #, c-format msgid "Menudrake" msgstr "" #: standalone/drakbug:53 #, c-format msgid "Msec" msgstr "" #: standalone/drakbug:54 #, c-format msgid "Remote Control" msgstr "" #: standalone/drakbug:55 #, c-format msgid "Software Manager" msgstr "" #: standalone/drakbug:56 #, c-format msgid "Urpmi" msgstr "" #: standalone/drakbug:57 #, c-format msgid "Windows Migration tool" msgstr "" #: standalone/drakbug:58 standalone/draksambashare:1230 #, c-format msgid "Userdrake" msgstr "" #: standalone/drakbug:59 #, c-format msgid "Configuration Wizards" msgstr "" #: standalone/drakbug:81 #, c-format msgid "Select Mandriva Tool:" msgstr "" #: standalone/drakbug:82 #, c-format msgid "" "or Application Name\n" "(or Full Path):" msgstr "" #: standalone/drakbug:85 #, c-format msgid "Find Package" msgstr "" #: standalone/drakbug:87 #, c-format msgid "Package: " msgstr "" #: standalone/drakbug:88 #, c-format msgid "Kernel:" msgstr "" #: standalone/drakbug:101 #, c-format msgid "" "To submit a bug report, click on the report button. \n" "This will open a web browser window on %s where you'll find a form to fill in. The information displayed above will be transferred to that server. \n" "Things useful to include in your report are the output of lspci, kernel version, and /proc/cpuinfo." msgstr "" #: standalone/drakbug:107 #, c-format msgid "Report" msgstr "" #: standalone/drakbug:162 #, c-format msgid "Not installed" msgstr "" #: standalone/drakbug:174 #, c-format msgid "Package not installed" msgstr "" #: standalone/drakclock:29 #, c-format msgid "DrakClock" msgstr "" #: standalone/drakclock:39 #, c-format msgid "not defined" msgstr "" #: standalone/drakclock:41 #, c-format msgid "Change Time Zone" msgstr "" #: standalone/drakclock:45 #, c-format msgid "Timezone - DrakClock" msgstr "" #: standalone/drakclock:47 #, c-format msgid "GMT - DrakClock" msgstr "" #: standalone/drakclock:47 #, c-format msgid "Is your hardware clock set to GMT?" msgstr "" #: standalone/drakclock:75 #, c-format msgid "Network Time Protocol" msgstr "" #: standalone/drakclock:77 #, c-format msgid "" "Your computer can synchronize its clock\n" " with a remote time server using NTP" msgstr "" #: standalone/drakclock:78 #, c-format msgid "Enable Network Time Protocol" msgstr "" #: standalone/drakclock:86 #, c-format msgid "Server:" msgstr "" #: standalone/drakclock:124 #, c-format msgid "Could not synchronize with %s." msgstr "" #: standalone/drakclock:146 standalone/drakclock:156 #, c-format msgid "Reset" msgstr "" #: standalone/drakclock:224 #, c-format msgid "" "We need to install ntp package\n" " to enable Network Time Protocol\n" "\n" "Do you want to install ntp?" msgstr "" #: standalone/drakconnect:80 #, c-format msgid "Network configuration (%d adapters)" msgstr "" #: standalone/drakconnect:89 standalone/drakconnect:807 #, c-format msgid "Gateway:" msgstr "" #: standalone/drakconnect:89 standalone/drakconnect:807 #, c-format msgid "Interface:" msgstr "" #: standalone/drakconnect:93 standalone/net_monitor:116 #, c-format msgid "Wait please" msgstr "" #: standalone/drakconnect:109 #, c-format msgid "Interface" msgstr "" #: standalone/drakconnect:109 standalone/printerdrake:224 standalone/printerdrake:231 #, c-format msgid "State" msgstr "" #: standalone/drakconnect:126 #, c-format msgid "Hostname: " msgstr "" #: standalone/drakconnect:128 #, c-format msgid "Configure hostname..." msgstr "" #: standalone/drakconnect:142 standalone/drakconnect:845 #, c-format msgid "LAN configuration" msgstr "" #: standalone/drakconnect:147 #, c-format msgid "Configure Local Area Network..." msgstr "" #: standalone/drakconnect:155 standalone/drakconnect:237 standalone/drakconnect:241 #, c-format msgid "Apply" msgstr "" #: standalone/drakconnect:188 #, c-format msgid "Manage connections" msgstr "" #: standalone/drakconnect:215 #, c-format msgid "Device selected" msgstr "" #: standalone/drakconnect:296 #, c-format msgid "IP configuration" msgstr "" #: standalone/drakconnect:335 #, c-format msgid "DNS servers" msgstr "" #: standalone/drakconnect:343 #, c-format msgid "Search Domain" msgstr "" #: standalone/drakconnect:351 #, c-format msgid "static" msgstr "" #: standalone/drakconnect:351 #, c-format msgid "DHCP" msgstr "" #: standalone/drakconnect:515 #, c-format msgid "Flow control" msgstr "" #: standalone/drakconnect:516 #, c-format msgid "Line termination" msgstr "" #: standalone/drakconnect:527 #, c-format msgid "Modem timeout" msgstr "" #: standalone/drakconnect:531 #, c-format msgid "Use lock file" msgstr "" #: standalone/drakconnect:533 #, c-format msgid "Wait for dialup tone before dialing" msgstr "" #: standalone/drakconnect:536 #, c-format msgid "Busy wait" msgstr "" #: standalone/drakconnect:541 #, c-format msgid "Modem sound" msgstr "" #: standalone/drakconnect:542 standalone/drakgw:105 #, c-format msgid "Enable" msgstr "" #: standalone/drakconnect:542 standalone/drakgw:105 #, c-format msgid "Disable" msgstr "" #: standalone/drakconnect:593 standalone/harddrake2:50 #, c-format msgid "Media class" msgstr "" #: standalone/drakconnect:594 #, c-format msgid "Module name" msgstr "" #: standalone/drakconnect:595 #, c-format msgid "Mac Address" msgstr "" #: standalone/drakconnect:596 standalone/harddrake2:28 standalone/harddrake2:120 #, c-format msgid "Bus" msgstr "" #: standalone/drakconnect:597 standalone/harddrake2:34 #, c-format msgid "Location on the bus" msgstr "" #: standalone/drakconnect:700 standalone/drakgw:311 #, c-format msgid "No ethernet network adapter has been detected on your system. Please run the hardware configuration tool." msgstr "" #: standalone/drakconnect:708 #, c-format msgid "Remove a network interface" msgstr "" #: standalone/drakconnect:712 #, c-format msgid "Select the network interface to remove:" msgstr "" #: standalone/drakconnect:744 #, c-format msgid "" "An error occurred while deleting the \"%s\" network interface:\n" "\n" "%s" msgstr "" #: standalone/drakconnect:745 #, c-format msgid "Congratulations, the \"%s\" network interface has been successfully deleted" msgstr "" #: standalone/drakconnect:761 #, c-format msgid "No IP" msgstr "" #: standalone/drakconnect:762 #, c-format msgid "No Mask" msgstr "" #: standalone/drakconnect:763 standalone/drakconnect:916 #, c-format msgid "up" msgstr "" #: standalone/drakconnect:763 standalone/drakconnect:916 #, c-format msgid "down" msgstr "" #: standalone/drakconnect:798 standalone/net_monitor:465 #, c-format msgid "Connected" msgstr "" #: standalone/drakconnect:798 standalone/net_monitor:465 #, c-format msgid "Not connected" msgstr "" #: standalone/drakconnect:800 #, c-format msgid "Disconnect..." msgstr "" #: standalone/drakconnect:800 #, c-format msgid "Connect..." msgstr "" #: standalone/drakconnect:841 #, c-format msgid "Deactivate now" msgstr "" #: standalone/drakconnect:841 #, c-format msgid "Activate now" msgstr "" #: standalone/drakconnect:849 #, c-format msgid "" "You do not have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" #: standalone/drakconnect:863 #, c-format msgid "LAN Configuration" msgstr "" #: standalone/drakconnect:875 #, c-format msgid "Adapter %s: %s" msgstr "" #: standalone/drakconnect:884 #, c-format msgid "Boot Protocol" msgstr "" #: standalone/drakconnect:885 #, c-format msgid "Started on boot" msgstr "" #: standalone/drakconnect:921 #, c-format msgid "" "This interface has not been configured yet.\n" "Run the \"Add an interface\" assistant from the Mandriva Linux Control Center" msgstr "" #: standalone/drakconnect:975 standalone/net_applet:51 #, c-format msgid "" "You do not have any configured Internet connection.\n" "Run the \"%s\" assistant from the Mandriva Linux Control Center" msgstr "" #. -PO: here "Add Connection" should be translated the same was as in control-center #: standalone/drakconnect:976 standalone/drakroam:30 standalone/net_applet:52 #, c-format msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)" msgstr "" #: standalone/drakconnect:981 #, c-format msgid "Internet connection configuration" msgstr "" #: standalone/drakconnect:994 #, c-format msgid "Third DNS server (optional)" msgstr "" #: standalone/drakconnect:1016 #, c-format msgid "Internet Connection Configuration" msgstr "" #: standalone/drakconnect:1017 #, c-format msgid "Internet access" msgstr "" #: standalone/drakconnect:1019 standalone/net_monitor:95 #, c-format msgid "Connection type: " msgstr "" #: standalone/drakconnect:1022 #, c-format msgid "Status:" msgstr "" #: standalone/drakedm:40 #, c-format msgid "GDM (GNOME Display Manager)" msgstr "" #: standalone/drakedm:41 #, c-format msgid "KDM (KDE Display Manager)" msgstr "" #: standalone/drakedm:42 #, c-format msgid "XDM (X Display Manager)" msgstr "" #: standalone/drakedm:53 #, c-format msgid "Choosing a display manager" msgstr "" #: standalone/drakedm:54 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" #: standalone/drakedm:72 #, c-format msgid "The change is done, do you want to restart the dm service?" msgstr "" #: standalone/drakedm:73 #, c-format msgid "You are going to close all running programs and lose your current session. Are you really sure that you want to restart the dm service?" msgstr "" #: standalone/drakfont:183 #, c-format msgid "Search installed fonts" msgstr "" #: standalone/drakfont:185 #, c-format msgid "Unselect fonts installed" msgstr "" #: standalone/drakfont:208 #, c-format msgid "parse all fonts" msgstr "" #: standalone/drakfont:210 #, c-format msgid "No fonts found" msgstr "" #: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327 standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394 standalone/drakfont:412 standalone/drakfont:426 #, c-format msgid "done" msgstr "" #: standalone/drakfont:223 #, c-format msgid "Could not find any font in your mounted partitions" msgstr "" #: standalone/drakfont:258 #, c-format msgid "Reselect correct fonts" msgstr "" #: standalone/drakfont:261 #, c-format msgid "" "Could not find any font.\n" "" msgstr "" #: standalone/drakfont:271 #, c-format msgid "Search for fonts in installed list" msgstr "" #: standalone/drakfont:296 #, c-format msgid "%s fonts conversion" msgstr "" #: standalone/drakfont:325 #, c-format msgid "Fonts copy" msgstr "" #: standalone/drakfont:328 #, c-format msgid "True Type fonts installation" msgstr "" #: standalone/drakfont:335 #, c-format msgid "please wait during ttmkfdir..." msgstr "" #: standalone/drakfont:336 #, c-format msgid "True Type install done" msgstr "" #: standalone/drakfont:342 standalone/drakfont:357 #, c-format msgid "type1inst building" msgstr "" #: standalone/drakfont:351 #, c-format msgid "Ghostscript referencing" msgstr "" #: standalone/drakfont:361 #, c-format msgid "Suppress Temporary Files" msgstr "" #: standalone/drakfont:364 #, c-format msgid "Restart XFS" msgstr "" #: standalone/drakfont:410 standalone/drakfont:420 #, c-format msgid "Suppress Fonts Files" msgstr "" #: standalone/drakfont:422 #, c-format msgid "xfs restart" msgstr "" #: standalone/drakfont:430 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may hang up your X Server." msgstr "" #: standalone/drakfont:474 standalone/drakfont:483 #, c-format msgid "DrakFont" msgstr "" #: standalone/drakfont:484 #, c-format msgid "Font List" msgstr "" #: standalone/drakfont:490 #, c-format msgid "About" msgstr "" #: standalone/drakfont:492 standalone/drakfont:687 standalone/drakfont:725 #, c-format msgid "Uninstall" msgstr "" #: standalone/drakfont:493 #, c-format msgid "Import" msgstr "" #: standalone/drakfont:494 #, c-format msgid "Get Windows Fonts" msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/drakfont:512 #, c-format msgid "" "Copyright (C) 2001-2002 by Mandriva \n" "\n" "\n" " DUPONT Sebastien (original version)\n" "\n" " CHAUMETTE Damien \n" "\n" " VIGNAUD Thierry " msgstr "" #: standalone/drakfont:521 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA." msgstr "" #: standalone/drakfont:537 #, c-format msgid "" "Thanks:\n" "\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" "\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" "\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" "" msgstr "" #: standalone/drakfont:556 #, c-format msgid "Choose the applications that will support the fonts:" msgstr "" #: standalone/drakfont:557 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and install them on your system.\n" "\n" "You can install the fonts the normal way. In rare cases, bogus fonts may hang up your X Server." msgstr "" #: standalone/drakfont:567 #, c-format msgid "Ghostscript" msgstr "" #: standalone/drakfont:568 #, c-format msgid "StarOffice" msgstr "" #: standalone/drakfont:569 #, c-format msgid "Abiword" msgstr "" #: standalone/drakfont:570 #, c-format msgid "Generic Printers" msgstr "" #: standalone/drakfont:584 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "" #: standalone/drakfont:585 #, c-format msgid "File Selection" msgstr "" #: standalone/drakfont:589 #, c-format msgid "Fonts" msgstr "" #: standalone/drakfont:652 #, c-format msgid "Import fonts" msgstr "" #: standalone/drakfont:657 #, c-format msgid "Install fonts" msgstr "" #: standalone/drakfont:692 #, c-format msgid "click here if you are sure." msgstr "" #: standalone/drakfont:694 #, c-format msgid "here if no." msgstr "" #: standalone/drakfont:733 #, c-format msgid "Unselected All" msgstr "" #: standalone/drakfont:736 #, c-format msgid "Selected All" msgstr "" #: standalone/drakfont:739 #, c-format msgid "Remove List" msgstr "" #: standalone/drakfont:750 standalone/drakfont:769 #, c-format msgid "Importing fonts" msgstr "" #: standalone/drakfont:754 standalone/drakfont:774 #, c-format msgid "Initial tests" msgstr "" #: standalone/drakfont:755 #, c-format msgid "Copy fonts on your system" msgstr "" #: standalone/drakfont:756 #, c-format msgid "Install & convert Fonts" msgstr "" #: standalone/drakfont:757 #, c-format msgid "Post Install" msgstr "" #: standalone/drakfont:775 #, c-format msgid "Remove fonts on your system" msgstr "" #: standalone/drakfont:776 #, c-format msgid "Post Uninstall" msgstr "" #: standalone/drakgw:50 standalone/drakvpn:51 #, c-format msgid "Sorry, we support only 2.4 and above kernels." msgstr "" #: standalone/drakgw:75 #, c-format msgid "Internet Connection Sharing" msgstr "" #: standalone/drakgw:79 #, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN)." msgstr "" #: standalone/drakgw:95 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" #: standalone/drakgw:99 #, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" #: standalone/drakgw:105 #, c-format msgid "Reconfigure" msgstr "" #: standalone/drakgw:145 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" #: standalone/drakgw:156 #, c-format msgid "Please choose what network adapter will be connected to your Local Area Network." msgstr "" #: standalone/drakgw:177 #, c-format msgid "Local Area Network setings" msgstr "" #: standalone/drakgw:180 #, c-format msgid "Local IP address" msgstr "" #: standalone/drakgw:182 #, c-format msgid "The internal domain name" msgstr "" #: standalone/drakgw:188 #, c-format msgid "" "Potential LAN address conflict found in current config of %s!\n" "" msgstr "" #: standalone/drakgw:204 #, c-format msgid "Domain Name Server (DNS) configuration" msgstr "" #: standalone/drakgw:208 #, c-format msgid "Use this gateway as domain name server" msgstr "" #: standalone/drakgw:209 #, c-format msgid "The DNS Server IP" msgstr "" #: standalone/drakgw:236 #, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you do not know the meaning of an option, simply leave it as it is." msgstr "" #: standalone/drakgw:243 #, c-format msgid "Use automatic configuration (DHCP)" msgstr "" #: standalone/drakgw:244 #, c-format msgid "The DHCP start range" msgstr "" #: standalone/drakgw:245 #, c-format msgid "The DHCP end range" msgstr "" #: standalone/drakgw:246 #, c-format msgid "The default lease (in seconds)" msgstr "" #: standalone/drakgw:247 #, c-format msgid "The maximum lease (in seconds)" msgstr "" #: standalone/drakgw:270 #, c-format msgid "Proxy caching server (SQUID)" msgstr "" #: standalone/drakgw:274 #, c-format msgid "Use this gateway as proxy caching server" msgstr "" #: standalone/drakgw:275 #, c-format msgid "Admin mail" msgstr "" #: standalone/drakgw:276 #, c-format msgid "Visible hostname" msgstr "" #: standalone/drakgw:277 #, c-format msgid "Proxy port" msgstr "" #: standalone/drakgw:278 #, c-format msgid "Cache size (MB)" msgstr "" #: standalone/drakgw:300 #, c-format msgid "Broadcast printer information" msgstr "" #: standalone/drakgw:317 #, c-format msgid "Internet Connection Sharing is now enabled." msgstr "" #: standalone/drakgw:323 #, c-format msgid "Internet Connection Sharing is now disabled." msgstr "" #: standalone/drakgw:329 #, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local Area Network, using automatic network configuration (DHCP) and\n" " a Transparent Proxy Cache server (SQUID)." msgstr "" #: standalone/drakgw:364 #, c-format msgid "Disabling servers..." msgstr "" #: standalone/drakgw:378 #, c-format msgid "Firewalling configuration detected!" msgstr "" #: standalone/drakgw:379 #, c-format msgid "Warning! An existing firewalling configuration has been detected. You may need some manual fixes after installation." msgstr "" #: standalone/drakgw:384 #, c-format msgid "Configuring..." msgstr "" #: standalone/drakgw:385 #, c-format msgid "Configuring firewall..." msgstr "" #: standalone/drakhelp:17 #, c-format msgid "" " drakhelp 0.1\n" "Copyright (C) 2003-2005 Mandriva.\n" "This is free software and may be redistributed under the terms of the GNU GPL.\n" "\n" "Usage: \n" "" msgstr "" #: standalone/drakhelp:22 #, c-format msgid "" " --help - display this help \n" "" msgstr "" #: standalone/drakhelp:23 #, c-format msgid "" " --id - load the html help page which refers to id_label\n" "" msgstr "" #: standalone/drakhelp:24 #, c-format msgid "" " --doc - link to another web page ( for WM welcome frontend)\n" "" msgstr "" #: standalone/drakhelp:36 #, c-format msgid "Mandriva Linux Help Center" msgstr "" #: standalone/drakhelp:36 #, c-format msgid "" "%s cannot be displayed \n" ". No Help entry of this type\n" "" msgstr "" #: standalone/drakhosts:98 #, c-format msgid "Please add an host to be able to modify it." msgstr "" #: standalone/drakhosts:108 #, c-format msgid "Please modify information" msgstr "" #: standalone/drakhosts:109 #, c-format msgid "Please delete information" msgstr "" #: standalone/drakhosts:110 #, c-format msgid "Please add information" msgstr "" #: standalone/drakhosts:115 #, c-format msgid "IP address:" msgstr "" #: standalone/drakhosts:116 #, c-format msgid "Host name:" msgstr "" #: standalone/drakhosts:117 #, c-format msgid "Host Aliases:" msgstr "" #: standalone/drakhosts:123 #, c-format msgid "Please enter a valid IP address." msgstr "" #: standalone/drakhosts:129 #, c-format msgid "Same IP is already in %s file." msgstr "" #: standalone/drakhosts:197 #, c-format msgid "Host Aliases" msgstr "" #: standalone/drakhosts:237 #, c-format msgid "DrakHOSTS manage hosts definitions" msgstr "" #: standalone/drakhosts:246 #, c-format msgid "Failed to add host." msgstr "" #: standalone/drakhosts:253 #, c-format msgid "Failed to Modify host." msgstr "" #: standalone/drakhosts:260 #, c-format msgid "Failed to remove host." msgstr "" #: standalone/drakids:26 #, c-format msgid "Allowed addresses" msgstr "" #: standalone/drakids:57 #, c-format msgid "Log" msgstr "" #: standalone/drakids:61 #, c-format msgid "Clear logs" msgstr "" #: standalone/drakids:62 standalone/drakids:67 standalone/net_applet:439 #, c-format msgid "Blacklist" msgstr "" #: standalone/drakids:63 standalone/drakids:80 standalone/net_applet:444 #, c-format msgid "Whitelist" msgstr "" #: standalone/drakids:71 #, c-format msgid "Remove from blacklist" msgstr "" #: standalone/drakids:72 #, c-format msgid "Move to whitelist" msgstr "" #: standalone/drakids:84 #, c-format msgid "Remove from whitelist" msgstr "" #: standalone/drakids:136 standalone/drakids:145 standalone/drakids:170 standalone/drakids:179 standalone/drakids:189 standalone/drakids:265 standalone/drakroam:140 standalone/net_applet:180 standalone/net_applet:354 #, c-format msgid "Unable to contact daemon" msgstr "" #: standalone/drakids:202 #, c-format msgid "Date" msgstr "" #: standalone/drakids:203 #, c-format msgid "Attacker" msgstr "" #: standalone/drakids:204 #, c-format msgid "Attack type" msgstr "" #: standalone/drakids:205 #, c-format msgid "Service" msgstr "" #: standalone/drakids:206 #, c-format msgid "Network interface" msgstr "" #: standalone/draknfs:41 #, c-format msgid "map root user as anonymous" msgstr "" #: standalone/draknfs:42 #, c-format msgid "map all users to anonymous user" msgstr "" #: standalone/draknfs:43 #, c-format msgid "No user UID mapping" msgstr "" #: standalone/draknfs:44 #, c-format msgid "allow real remote root access" msgstr "" #: standalone/draknfs:83 #, c-format msgid "NFS server" msgstr "" #: standalone/draknfs:83 #, c-format msgid "Restarting/Reloading NFS server..." msgstr "" #: standalone/draknfs:84 #, c-format msgid "Error Restarting/Reloading NFS server" msgstr "" #: standalone/draknfs:100 standalone/draksambashare:197 #, c-format msgid "Directory Selection" msgstr "" #: standalone/draknfs:105 standalone/draksambashare:202 #, c-format msgid "Should be a directory." msgstr "" #: standalone/draknfs:136 #, c-format msgid "" "NFS clients may be specified in a number of ways:\n" "\n" "\n" "single host: a host either by an abbreviated name recognized be the resolver, fully qualified domain name, or an IP address\n" "\n" "\n" "netgroups: NIS netgroups may be given as @group.\n" "\n" "\n" "wildcards: machine names may contain the wildcard characters * and ?. For instance: *.cs.foo.edu matches all hosts in the domain cs.foo.edu.\n" "\n" "\n" "IP networks: you can also export directories to all hosts on an IP (sub-)network simultaneously. for example, either `/255.255.252.0' or `/22' appended to the network base address result.\n" "" msgstr "" #: standalone/draknfs:151 #, c-format msgid "" "User ID options\n" "\n" "\n" "map root user as anonymou: map requests from uid/gid 0 to the anonymous uid/gid (root_squash).\n" "\n" "\n" "allow real remote root access: turn off root squashing. This option is mainly useful for diskless clients (no_root_squash).\n" "\n" "\n" "map all users to anonymous user: map all uids and gids to the anonymous user (all_squash). Useful for NFS-exported public FTP directories, news spool directories, etc. The opposite option is no user UID mapping (no_all_squash), which is the default setting.\n" "\n" "\n" "anonuid and anongid: explicitly set the uid and gid of the anonymous account.\n" "" msgstr "" #: standalone/draknfs:167 #, c-format msgid "Synchronous access:" msgstr "" #: standalone/draknfs:168 #, c-format msgid "Secured Connection:" msgstr "" #: standalone/draknfs:169 #, c-format msgid "Read-Only share:" msgstr "" #: standalone/draknfs:171 #, c-format msgid "Advanced Options" msgstr "" #: standalone/draknfs:172 #, c-format msgid "%s: this option requires that requests originate on an internet port less than IPPORT_RESERVED (1024). This option is on by default." msgstr "" #: standalone/draknfs:173 #, c-format msgid "%s: allow either only read or both read and write requests on this NFS volume. The default is to disallow any request which changes the filesystem. This can also be made explicit by using this option." msgstr "" #: standalone/draknfs:174 #, c-format msgid "%s: disallows the NFS server to violate the NFS protocol and to reply to requests before any changes made by these requests have been committed to stable storage (e.g. disc drive)." msgstr "" #: standalone/draknfs:306 #, c-format msgid "Please add an NFS share to be able to modify it." msgstr "" #: standalone/draknfs:378 #, c-format msgid "Advanced Options Help" msgstr "" #: standalone/draknfs:389 #, c-format msgid "NFS directory" msgstr "" #: standalone/draknfs:391 standalone/draksambashare:588 standalone/draksambashare:767 #, c-format msgid "Directory:" msgstr "" #: standalone/draknfs:394 #, c-format msgid "Host access" msgstr "" #: standalone/draknfs:396 #, c-format msgid "Access:" msgstr "" #: standalone/draknfs:396 #, c-format msgid "Hosts Access" msgstr "" #: standalone/draknfs:399 #, c-format msgid "User ID Mapping" msgstr "" #: standalone/draknfs:401 #, c-format msgid "User ID:" msgstr "" #: standalone/draknfs:401 #, c-format msgid "Help User ID" msgstr "" #: standalone/draknfs:402 #, c-format msgid "Anonymous user ID:" msgstr "" #: standalone/draknfs:403 #, c-format msgid "Anonymous Group ID:" msgstr "" #: standalone/draknfs:444 #, c-format msgid "Can't create this directory." msgstr "" #: standalone/draknfs:447 #, c-format msgid "You must specify hosts access." msgstr "" #: standalone/draknfs:527 #, c-format msgid "Share Directory" msgstr "" #: standalone/draknfs:527 #, c-format msgid "Hosts Wildcard" msgstr "" #: standalone/draknfs:527 #, c-format msgid "General Options" msgstr "" #: standalone/draknfs:527 #, c-format msgid "Custom Options" msgstr "" #: standalone/draknfs:539 standalone/draksambashare:625 standalone/draksambashare:792 #, c-format msgid "Please enter a directory to share." msgstr "" #: standalone/draknfs:546 #, c-format msgid "Please use the modify button to set right access." msgstr "" #: standalone/draknfs:600 #, c-format msgid "DrakNFS manage NFS shares" msgstr "" #: standalone/draknfs:609 #, c-format msgid "Failed to add NFS share." msgstr "" #: standalone/draknfs:616 #, c-format msgid "Failed to Modify NFS share." msgstr "" #: standalone/draknfs:623 #, c-format msgid "Failed to remove an NFS share." msgstr "" #: standalone/drakperm:21 #, c-format msgid "System settings" msgstr "" #: standalone/drakperm:22 #, c-format msgid "Custom settings" msgstr "" #: standalone/drakperm:23 #, c-format msgid "Custom & system settings" msgstr "" #: standalone/drakperm:43 #, c-format msgid "Editable" msgstr "" #: standalone/drakperm:48 standalone/drakperm:323 standalone/draksambashare:95 #, c-format msgid "Path" msgstr "" #: standalone/drakperm:48 standalone/drakperm:250 #, c-format msgid "User" msgstr "" #: standalone/drakperm:48 standalone/drakperm:250 #, c-format msgid "Group" msgstr "" #: standalone/drakperm:48 standalone/drakperm:335 #, c-format msgid "Permissions" msgstr "" #: standalone/drakperm:57 #, c-format msgid "Add a new rule" msgstr "" #: standalone/drakperm:64 standalone/drakperm:99 standalone/drakperm:124 #, c-format msgid "Edit current rule" msgstr "" #: standalone/drakperm:106 #, c-format msgid "" "Here you can see files to use in order to fix permissions, owners, and groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" #: standalone/drakperm:109 #, c-format msgid "" "The current security level is %s.\n" "Select permissions to see/edit" msgstr "" #: standalone/drakperm:120 #, c-format msgid "Up" msgstr "" #: standalone/drakperm:120 #, c-format msgid "Move selected rule up one level" msgstr "" #: standalone/drakperm:121 #, c-format msgid "Down" msgstr "" #: standalone/drakperm:121 #, c-format msgid "Move selected rule down one level" msgstr "" #: standalone/drakperm:122 #, c-format msgid "Add a rule" msgstr "" #: standalone/drakperm:122 #, c-format msgid "Add a new rule at the end" msgstr "" #: standalone/drakperm:123 #, c-format msgid "Delete selected rule" msgstr "" #. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/drakperm:124 standalone/drakups:302 standalone/drakups:362 standalone/drakups:382 standalone/drakvpn:319 standalone/drakvpn:680 standalone/printerdrake:245 #, c-format msgid "Edit" msgstr "" #: standalone/drakperm:242 #, c-format msgid "browse" msgstr "" #: standalone/drakperm:247 #, c-format msgid "user" msgstr "" #: standalone/drakperm:247 #, c-format msgid "group" msgstr "" #: standalone/drakperm:247 #, c-format msgid "other" msgstr "" #: standalone/drakperm:252 #, c-format msgid "Read" msgstr "" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:255 #, c-format msgid "Enable \"%s\" to read the file" msgstr "" #: standalone/drakperm:259 #, c-format msgid "Write" msgstr "" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:262 #, c-format msgid "Enable \"%s\" to write the file" msgstr "" #: standalone/drakperm:266 #, c-format msgid "Execute" msgstr "" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:269 #, c-format msgid "Enable \"%s\" to execute the file" msgstr "" #: standalone/drakperm:272 #, c-format msgid "Sticky-bit" msgstr "" #: standalone/drakperm:272 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" #: standalone/drakperm:273 #, c-format msgid "Set-UID" msgstr "" #: standalone/drakperm:273 #, c-format msgid "Use owner id for execution" msgstr "" #: standalone/drakperm:274 #, c-format msgid "Set-GID" msgstr "" #: standalone/drakperm:274 #, c-format msgid "Use group id for execution" msgstr "" #: standalone/drakperm:292 standalone/drakxtv:89 #, c-format msgid "User:" msgstr "" #: standalone/drakperm:294 #, c-format msgid "Group:" msgstr "" #: standalone/drakperm:298 #, c-format msgid "Current user" msgstr "" #: standalone/drakperm:299 #, c-format msgid "When checked, owner and group will not be changed" msgstr "" #: standalone/drakperm:309 #, c-format msgid "Path selection" msgstr "" #: standalone/drakperm:329 #, c-format msgid "Property" msgstr "" #: standalone/drakperm:380 #, c-format msgid "" "The first character of the path must be a slash (\"/\"):\n" "\"%s\"" msgstr "" #: standalone/drakperm:390 #, c-format msgid "Both the username and the group must valid!" msgstr "" #: standalone/drakperm:391 #, c-format msgid "User: %s" msgstr "" #: standalone/drakperm:392 #, c-format msgid "Group: %s" msgstr "" #: standalone/drakroam:29 #, c-format msgid "" "You do not have any wireless interface.\n" "Run the \"%s\" assistant from the Mandriva Linux Control Center" msgstr "" #: standalone/drakroam:44 #, c-format msgid "SSID" msgstr "" #: standalone/drakroam:46 #, c-format msgid "Encryption" msgstr "" #: standalone/drakroam:47 #, c-format msgid "Signal strength" msgstr "" #: standalone/drakroam:104 #, c-format msgid "Please enter settings for wireless network \"%s\"" msgstr "" #: standalone/drakroam:115 #, c-format msgid "DNS server" msgstr "" #: standalone/drakroam:166 #, c-format msgid "Connect" msgstr "" #. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/drakroam:167 standalone/printerdrake:251 #, c-format msgid "Refresh" msgstr "" #: standalone/draksambashare:62 #, c-format msgid "Share directory" msgstr "" #: standalone/draksambashare:63 standalone/draksambashare:96 #, c-format msgid "Comment" msgstr "" #: standalone/draksambashare:64 standalone/draksambashare:97 #, c-format msgid "Browseable" msgstr "" #: standalone/draksambashare:65 #, c-format msgid "Public" msgstr "" #: standalone/draksambashare:66 standalone/draksambashare:102 #, c-format msgid "Writable" msgstr "" #: standalone/draksambashare:67 standalone/draksambashare:143 #, c-format msgid "Create mask" msgstr "" #: standalone/draksambashare:68 standalone/draksambashare:144 #, c-format msgid "Directory mask" msgstr "" #: standalone/draksambashare:69 #, c-format msgid "Read list" msgstr "" #: standalone/draksambashare:70 standalone/draksambashare:103 standalone/draksambashare:602 #, c-format msgid "Write list" msgstr "" #: standalone/draksambashare:71 standalone/draksambashare:135 #, c-format msgid "Admin users" msgstr "" #: standalone/draksambashare:72 standalone/draksambashare:136 #, c-format msgid "Valid users" msgstr "" #: standalone/draksambashare:73 #, c-format msgid "Inherit Permissions" msgstr "" #: standalone/draksambashare:74 standalone/draksambashare:137 #, c-format msgid "Hide dot files" msgstr "" #: standalone/draksambashare:76 standalone/draksambashare:142 #, c-format msgid "Preserve case" msgstr "" #: standalone/draksambashare:77 #, c-format msgid "Force create mode" msgstr "" #: standalone/draksambashare:78 #, c-format msgid "Force group" msgstr "" #: standalone/draksambashare:79 standalone/draksambashare:141 #, c-format msgid "Default case" msgstr "" #: standalone/draksambashare:94 #, c-format msgid "Printer name" msgstr "" #: standalone/draksambashare:98 standalone/draksambashare:594 #, c-format msgid "Printable" msgstr "" #: standalone/draksambashare:99 #, c-format msgid "Print Command" msgstr "" #: standalone/draksambashare:100 #, c-format msgid "LPQ command" msgstr "" #: standalone/draksambashare:101 #, c-format msgid "Guest ok" msgstr "" #: standalone/draksambashare:104 standalone/draksambashare:145 standalone/draksambashare:603 #, c-format msgid "Inherit permissions" msgstr "" #: standalone/draksambashare:106 #, c-format msgid "Create mode" msgstr "" #: standalone/draksambashare:107 #, c-format msgid "Use client driver" msgstr "" #: standalone/draksambashare:133 #, c-format msgid "Read List" msgstr "" #: standalone/draksambashare:134 #, c-format msgid "Write List" msgstr "" #: standalone/draksambashare:139 #, c-format msgid "Force Group" msgstr "" #: standalone/draksambashare:140 #, c-format msgid "Force create group" msgstr "" #: standalone/draksambashare:160 #, c-format msgid "About Draksambashare" msgstr "" #: standalone/draksambashare:160 #, c-format msgid "" "Mandriva Linux \n" "Release: %s\n" "Author: Antoine Ginies\n" "\n" "This is a simple tool to easily manage Samba configuration." msgstr "" #: standalone/draksambashare:180 #, c-format msgid "Samba server" msgstr "" #: standalone/draksambashare:180 #, c-format msgid "Restarting/Reloading Samba server..." msgstr "" #: standalone/draksambashare:181 #, c-format msgid "Error Restarting/Reloading Samba server" msgstr "" #: standalone/draksambashare:367 #, c-format msgid "Add a Samba share" msgstr "" #: standalone/draksambashare:370 #, c-format msgid "Goal of this wizard is to easily create a new Samba share." msgstr "" #: standalone/draksambashare:372 #, c-format msgid "Name of the share:" msgstr "" #: standalone/draksambashare:373 standalone/draksambashare:587 standalone/draksambashare:768 #, c-format msgid "Comment:" msgstr "" #: standalone/draksambashare:374 #, c-format msgid "Path:" msgstr "" #: standalone/draksambashare:379 #, c-format msgid "Share with the same name already exist or share name empty, please choose another name." msgstr "" #: standalone/draksambashare:383 standalone/draksambashare:389 #, c-format msgid "Can't create the directory, please enter a correct path." msgstr "" #: standalone/draksambashare:386 standalone/draksambashare:623 standalone/draksambashare:790 #, c-format msgid "Please enter a Comment for this share." msgstr "" #: standalone/draksambashare:417 #, c-format msgid "The wizard successfully added the Samba share. Now just double click on it in treeview to modify it" msgstr "" #: standalone/draksambashare:433 #, c-format msgid "pdf-gen - a PDF generator" msgstr "" #: standalone/draksambashare:434 #, c-format msgid "printers - all printers available" msgstr "" #: standalone/draksambashare:438 #, c-format msgid "Add Special Printer share" msgstr "" #: standalone/draksambashare:441 #, c-format msgid "Goal of this wizard is to easily create a new special printer Samba share." msgstr "" #: standalone/draksambashare:449 #, c-format msgid "A PDF generator already exists." msgstr "" #: standalone/draksambashare:473 #, c-format msgid "Printers and print$ already exist." msgstr "" #: standalone/draksambashare:524 #, c-format msgid "The wizard successfully added the printer Samba share" msgstr "" #: standalone/draksambashare:547 #, c-format msgid "Please add or select a Samba printer share to be able to modify it." msgstr "" #: standalone/draksambashare:583 #, c-format msgid "Printer share" msgstr "" #: standalone/draksambashare:586 #, c-format msgid "Printer name:" msgstr "" #: standalone/draksambashare:592 standalone/draksambashare:773 #, c-format msgid "Writable:" msgstr "" #: standalone/draksambashare:593 standalone/draksambashare:774 #, c-format msgid "Browseable:" msgstr "" #: standalone/draksambashare:598 #, c-format msgid "Advanced options" msgstr "" #: standalone/draksambashare:600 #, c-format msgid "Printer access" msgstr "" #: standalone/draksambashare:604 #, c-format msgid "Guest ok:" msgstr "" #: standalone/draksambashare:605 #, c-format msgid "Create mode:" msgstr "" #: standalone/draksambashare:609 #, c-format msgid "Printer command" msgstr "" #: standalone/draksambashare:611 #, c-format msgid "Print command:" msgstr "" #: standalone/draksambashare:612 #, c-format msgid "LPQ command:" msgstr "" #: standalone/draksambashare:613 #, c-format msgid "Printing:" msgstr "" #: standalone/draksambashare:629 #, c-format msgid "create mode should be numeric. ie: 0755." msgstr "" #: standalone/draksambashare:691 #, c-format msgid "DrakSamba entry" msgstr "" #: standalone/draksambashare:696 #, c-format msgid "Please add or select a Samba share to be able to modify it." msgstr "" #: standalone/draksambashare:719 #, c-format msgid "Samba user access" msgstr "" #: standalone/draksambashare:727 #, c-format msgid "Mask options" msgstr "" #: standalone/draksambashare:741 #, c-format msgid "Display options" msgstr "" #: standalone/draksambashare:763 #, c-format msgid "Samba share directory" msgstr "" #: standalone/draksambashare:766 #, c-format msgid "Share name:" msgstr "" #: standalone/draksambashare:772 #, c-format msgid "Public:" msgstr "" #: standalone/draksambashare:796 #, c-format msgid "Create mask, create mode and directory mask should be numeric. ie: 0755." msgstr "" #: standalone/draksambashare:803 #, c-format msgid "Please create this Samba user: %s" msgstr "" #: standalone/draksambashare:926 #, c-format msgid "User information" msgstr "" #: standalone/draksambashare:928 #, c-format msgid "User name:" msgstr "" #: standalone/draksambashare:929 standalone/harddrake2:551 #, c-format msgid "Password:" msgstr "" #: standalone/draksambashare:1129 #, c-format msgid "Failed to add Samba share." msgstr "" #: standalone/draksambashare:1138 #, c-format msgid "Failed to Modify Samba share." msgstr "" #: standalone/draksambashare:1147 #, c-format msgid "Failed to remove a Samba share." msgstr "" #: standalone/draksambashare:1154 #, c-format msgid "File share" msgstr "" #: standalone/draksambashare:1162 #, c-format msgid "Add printers" msgstr "" #: standalone/draksambashare:1168 #, c-format msgid "Failed to add printers." msgstr "" #: standalone/draksambashare:1177 #, c-format msgid "Failed to Modify." msgstr "" #: standalone/draksambashare:1186 #, c-format msgid "Failed to remove." msgstr "" #: standalone/draksambashare:1193 #, c-format msgid "Printers" msgstr "" #: standalone/draksambashare:1201 #, c-format msgid "Change password" msgstr "" #: standalone/draksambashare:1206 #, c-format msgid "Failed to change user password." msgstr "" #: standalone/draksambashare:1214 #, c-format msgid "Failed to add user." msgstr "" #: standalone/draksambashare:1217 #, c-format msgid "Delete user" msgstr "" #: standalone/draksambashare:1226 #, c-format msgid "Failed to delete user." msgstr "" #: standalone/draksambashare:1238 #, c-format msgid "Samba Users" msgstr "" #: standalone/draksambashare:1247 #, c-format msgid "DrakSamba manage Samba shares" msgstr "" #: standalone/draksec:49 #, c-format msgid "ALL" msgstr "" #: standalone/draksec:50 #, c-format msgid "LOCAL" msgstr "" #: standalone/draksec:53 standalone/net_applet:449 #, c-format msgid "Ignore" msgstr "" #. -PO: Do not alter the and tags. #. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words. #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX. #: standalone/draksec:101 #, c-format msgid "" "Here, you can setup the security level and administrator of your machine.\n" "\n" "\n" "The 'Security Administrator' is the one who will receive security alerts if the\n" "'Security Alerts' option is set. It can be a username or an email.\n" "\n" "\n" "The 'Security Level' menu allows you to select one of the six preconfigured security levels\n" "provided with msec. These levels range from 'poor' security and ease of use, to\n" "'paranoid' config, suitable for very sensitive server applications:\n" "\n" "\n" "Poor: This is a totally unsafe but very\n" "easy to use security level. It should only be used for machines not connected to\n" "any network and that are not accessible to everybody.\n" "\n" "\n" "Standard: This is the standard security\n" "recommended for a computer that will be used to connect to the Internet as a\n" "client.\n" "\n" "\n" "High: There are already some\n" "restrictions, and more automatic checks are run every night.\n" "\n" "\n" "Higher: The security is now high enough\n" "to use the system as a server which can accept connections from many clients. If\n" "your machine is only a client on the Internet, you should choose a lower level.\n" "\n" "\n" "Paranoid: This is similar to the previous\n" "level, but the system is entirely closed and security features are at their\n" "maximum" msgstr "" #: standalone/draksec:154 standalone/harddrake2:208 #, c-format msgid "" "Description of the fields:\n" "\n" "" msgstr "" #: standalone/draksec:168 #, c-format msgid "(default value: %s)" msgstr "" #: standalone/draksec:210 #, c-format msgid "Security Level:" msgstr "" #: standalone/draksec:217 #, c-format msgid "Security Administrator:" msgstr "" #: standalone/draksec:219 #, c-format msgid "Basic options" msgstr "" #: standalone/draksec:233 #, c-format msgid "Network Options" msgstr "" #: standalone/draksec:233 #, c-format msgid "System Options" msgstr "" #: standalone/draksec:268 #, c-format msgid "Periodic Checks" msgstr "" #: standalone/draksec:298 #, c-format msgid "Please wait, setting security level..." msgstr "" #: standalone/draksec:304 #, c-format msgid "Please wait, setting security options..." msgstr "" #: standalone/draksound:47 #, c-format msgid "No Sound Card detected!" msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/draksound:50 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.mandrivalinux.com/en/hardware.php3" msgstr "" #: standalone/draksound:57 #, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or the sndconfig program. Just type \"alsaconf\" or \"sndconfig\" in a console." msgstr "" #: standalone/draksplash:30 #, c-format msgid "x coordinate of text box" msgstr "" #: standalone/draksplash:31 #, c-format msgid "y coordinate of text box" msgstr "" #: standalone/draksplash:32 #, c-format msgid "text box width" msgstr "" #: standalone/draksplash:33 #, c-format msgid "text box height" msgstr "" #: standalone/draksplash:34 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" #: standalone/draksplash:35 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" #: standalone/draksplash:36 #, c-format msgid "the width of the progress bar" msgstr "" #: standalone/draksplash:37 #, c-format msgid "the height of the progress bar" msgstr "" #: standalone/draksplash:38 #, c-format msgid "x coordinate of the text" msgstr "" #: standalone/draksplash:39 #, c-format msgid "y coordinate of the text" msgstr "" #: standalone/draksplash:40 #, c-format msgid "text box transparency" msgstr "" #: standalone/draksplash:41 #, c-format msgid "progress box transparency" msgstr "" #: standalone/draksplash:42 #, c-format msgid "text size" msgstr "" #: standalone/draksplash:59 #, c-format msgid "Choose progress bar color 1" msgstr "" #: standalone/draksplash:60 #, c-format msgid "Choose progress bar color 2" msgstr "" #: standalone/draksplash:61 #, c-format msgid "Choose progress bar background" msgstr "" #: standalone/draksplash:62 #, c-format msgid "Gradient type" msgstr "" #: standalone/draksplash:63 #, c-format msgid "Choose text color" msgstr "" #: standalone/draksplash:65 standalone/draksplash:72 #, c-format msgid "Choose picture" msgstr "" #: standalone/draksplash:66 #, c-format msgid "Silent bootsplash" msgstr "" #: standalone/draksplash:69 #, c-format msgid "Choose text zone color" msgstr "" #: standalone/draksplash:70 #, c-format msgid "Text color" msgstr "" #: standalone/draksplash:71 #, c-format msgid "Background color" msgstr "" #: standalone/draksplash:73 #, c-format msgid "Verbose bootsplash" msgstr "" #: standalone/draksplash:75 #, c-format msgid "Display logo on Console" msgstr "" #: standalone/draksplash:78 #, c-format msgid "Console bootsplash" msgstr "" #: standalone/draksplash:84 #, c-format msgid "Theme name" msgstr "" #: standalone/draksplash:87 #, c-format msgid "final resolution" msgstr "" #: standalone/draksplash:92 #, c-format msgid "Save theme" msgstr "" #: standalone/draksplash:153 #, c-format msgid "saving Bootsplash theme..." msgstr "" #: standalone/draksplash:162 #, c-format msgid "Unable to load image file %s" msgstr "" #: standalone/draksplash:173 #, c-format msgid "choose image" msgstr "" #: standalone/draksplash:188 #, c-format msgid "Color selection" msgstr "" #: standalone/drakups:74 #, c-format msgid "Connected through a serial port or an usb cable" msgstr "" #: standalone/drakups:80 #, c-format msgid "Add an UPS device" msgstr "" #: standalone/drakups:83 #, c-format msgid "" "Welcome to the UPS configuration utility.\n" "\n" "Here, you'll add a new UPS to your system.\n" "" msgstr "" #: standalone/drakups:90 #, c-format msgid "" "We're going to add an UPS device.\n" "\n" "Do you want to autodetect UPS devices connected to this machine or to manually select them?" msgstr "" #: standalone/drakups:93 #, c-format msgid "Autodetection" msgstr "" #: standalone/drakups:101 standalone/harddrake2:246 #, c-format msgid "Detection in progress" msgstr "" #: standalone/drakups:121 #, c-format msgid "The wizard successfully added the following UPS devices:" msgstr "" #: standalone/drakups:123 #, c-format msgid "No new UPS devices was found" msgstr "" #: standalone/drakups:128 standalone/drakups:140 #, c-format msgid "UPS driver configuration" msgstr "" #: standalone/drakups:128 #, c-format msgid "Please select your UPS model." msgstr "" #: standalone/drakups:129 #, c-format msgid "Manufacturer / Model:" msgstr "" #: standalone/drakups:140 #, c-format msgid "" "We are configuring the \"%s\" UPS from \"%s\".\n" "Please fill in its name, its driver and its port." msgstr "" #: standalone/drakups:145 #, c-format msgid "Name:" msgstr "" #: standalone/drakups:145 #, c-format msgid "The name of your ups" msgstr "" #: standalone/drakups:146 #, c-format msgid "The driver that manages your ups" msgstr "" #: standalone/drakups:147 #, c-format msgid "Port:" msgstr "" #: standalone/drakups:149 #, c-format msgid "The port on which is connected your ups" msgstr "" #: standalone/drakups:159 #, c-format msgid "The wizard successfully configured the new \"%s\" UPS device." msgstr "" #: standalone/drakups:250 #, c-format msgid "UPS devices" msgstr "" #: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286 standalone/harddrake2:85 standalone/harddrake2:111 standalone/harddrake2:118 #, c-format msgid "Name" msgstr "" #: standalone/drakups:269 #, c-format msgid "UPS users" msgstr "" #: standalone/drakups:285 #, c-format msgid "Access Control Lists" msgstr "" #: standalone/drakups:286 #, c-format msgid "IP mask" msgstr "" #: standalone/drakups:298 #, c-format msgid "Rules" msgstr "" #: standalone/drakups:299 #, c-format msgid "Action" msgstr "" #: standalone/drakups:299 standalone/drakvpn:1132 standalone/harddrake2:82 #, c-format msgid "Level" msgstr "" #: standalone/drakups:299 #, c-format msgid "ACL name" msgstr "" #: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342 #, c-format msgid "DrakUPS" msgstr "" #: standalone/drakups:339 #, c-format msgid "Welcome to the UPS configuration tools" msgstr "" #: standalone/drakvpn:73 #, c-format msgid "DrakVPN" msgstr "" #: standalone/drakvpn:95 #, c-format msgid "The VPN connection is enabled." msgstr "" #: standalone/drakvpn:96 #, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" #: standalone/drakvpn:101 #, c-format msgid "disable" msgstr "" #: standalone/drakvpn:101 standalone/drakvpn:127 #, c-format msgid "reconfigure" msgstr "" #: standalone/drakvpn:101 standalone/drakvpn:127 standalone/drakvpn:362 standalone/drakvpn:721 #, c-format msgid "dismiss" msgstr "" #: standalone/drakvpn:105 #, c-format msgid "Disabling VPN..." msgstr "" #: standalone/drakvpn:114 #, c-format msgid "The VPN connection is now disabled." msgstr "" #: standalone/drakvpn:121 #, c-format msgid "VPN connection currently disabled" msgstr "" #: standalone/drakvpn:122 #, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" #: standalone/drakvpn:127 #, c-format msgid "enable" msgstr "" #: standalone/drakvpn:135 #, c-format msgid "Enabling VPN..." msgstr "" #: standalone/drakvpn:141 #, c-format msgid "The VPN connection is now enabled." msgstr "" #: standalone/drakvpn:155 standalone/drakvpn:183 #, c-format msgid "Simple VPN setup." msgstr "" #: standalone/drakvpn:156 #, c-format msgid "" "You are about to configure your computer to use a VPN connection.\n" "\n" "With this feature, computers on your local private network and computers\n" "on some other remote private networks, can share resources, through\n" "their respective firewalls, over the Internet, in a secure manner. \n" "\n" "The communication over the Internet is encrypted. The local and remote\n" "computers look as if they were on the same network.\n" "\n" "Make sure you have configured your Network/Internet access using\n" "drakconnect before going any further." msgstr "" #: standalone/drakvpn:184 #, c-format msgid "" "VPN connection.\n" "\n" "This program is based on the following projects:\n" " - FreeSwan: \t\t\thttp://www.freeswan.org/\n" " - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n" " - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n" " - ipsec-howto: \t\thttp://www.ipsec-howto.org\n" " - the docs and man pages coming with the %s package\n" "\n" "Please read AT LEAST the ipsec-howto docs\n" "before going any further." msgstr "" #: standalone/drakvpn:196 #, c-format msgid "Kernel module." msgstr "" #: standalone/drakvpn:197 #, c-format msgid "" "The kernel needs to have ipsec support.\n" "\n" "You're running a %s kernel version.\n" "\n" "This kernel has '%s' support." msgstr "" #: standalone/drakvpn:264 #, c-format msgid "Problems installing package %s" msgstr "" #: standalone/drakvpn:278 #, c-format msgid "Security Policies" msgstr "" #: standalone/drakvpn:278 #, c-format msgid "IKE daemon racoon" msgstr "" #: standalone/drakvpn:281 standalone/drakvpn:292 #, c-format msgid "Configuration file" msgstr "" #: standalone/drakvpn:282 #, c-format msgid "" "Configuration step!\n" "\n" "You need to define the Security Policies and then to \n" "configure the automatic key exchange (IKE) daemon. \n" "The KAME IKE daemon we're using is called 'racoon'.\n" "\n" "What would you like to configure?\n" "" msgstr "" #: standalone/drakvpn:293 #, c-format msgid "" "Next, we will configure the %s file.\n" "\n" "\n" "Simply click on Next.\n" "" msgstr "" #: standalone/drakvpn:311 standalone/drakvpn:671 #, c-format msgid "%s entries" msgstr "" #: standalone/drakvpn:312 #, c-format msgid "" "The %s file contents\n" "is divided into sections.\n" "\n" "You can now:\n" "\n" " - display, add, edit, or remove sections, then\n" " - commit the changes\n" "\n" "What would you like to do?\n" "" msgstr "" #: standalone/drakvpn:319 standalone/drakvpn:680 #, c-format msgid "" "_:display here is a verb\n" "Display" msgstr "" #: standalone/drakvpn:319 standalone/drakvpn:680 #, c-format msgid "Commit" msgstr "" #: standalone/drakvpn:333 standalone/drakvpn:337 standalone/drakvpn:695 standalone/drakvpn:699 #, c-format msgid "" "_:display here is a verb\n" "Display configuration" msgstr "" #: standalone/drakvpn:338 #, c-format msgid "" "The %s file does not exist.\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose 'add'.\n" "" msgstr "" #: standalone/drakvpn:354 #, c-format msgid "ipsec.conf entries" msgstr "" #: standalone/drakvpn:355 #, c-format msgid "" "The %s file contains different sections.\n" "\n" "Here is its skeleton:\t'config setup' \n" "\t\t\t\t\t'conn default' \n" "\t\t\t\t\t'normal1'\n" "\t\t\t\t\t'normal2' \n" "\n" "You can now add one of these sections.\n" "\n" "Choose the section you would like to add.\n" "" msgstr "" #: standalone/drakvpn:362 #, c-format msgid "config setup" msgstr "" #: standalone/drakvpn:362 #, c-format msgid "conn %default" msgstr "" #: standalone/drakvpn:362 #, c-format msgid "normal conn" msgstr "" #: standalone/drakvpn:368 standalone/drakvpn:409 standalone/drakvpn:496 #, c-format msgid "Exists!" msgstr "" #: standalone/drakvpn:369 standalone/drakvpn:410 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change its name.\n" "" msgstr "" #: standalone/drakvpn:386 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow this config\n" "setup section.\n" "\n" "Choose continue or previous when you are done.\n" "" msgstr "" #: standalone/drakvpn:391 #, c-format msgid "interfaces" msgstr "" #: standalone/drakvpn:392 #, c-format msgid "klipsdebug" msgstr "" #: standalone/drakvpn:393 #, c-format msgid "plutodebug" msgstr "" #: standalone/drakvpn:394 #, c-format msgid "plutoload" msgstr "" #: standalone/drakvpn:395 #, c-format msgid "plutostart" msgstr "" #: standalone/drakvpn:396 #, c-format msgid "uniqueids" msgstr "" #: standalone/drakvpn:430 #, c-format msgid "" "This is the first section after the config\n" "setup one.\n" "\n" "Here you define the default settings. \n" "All the other sections will follow this one.\n" "The left settings are optional. If do not define\n" "them here, globally, you can define them in each\n" "section.\n" "" msgstr "" #: standalone/drakvpn:437 #, c-format msgid "PFS" msgstr "" #: standalone/drakvpn:438 #, c-format msgid "keyingtries" msgstr "" #: standalone/drakvpn:439 #, c-format msgid "compress" msgstr "" #: standalone/drakvpn:440 #, c-format msgid "disablearrivalcheck" msgstr "" #: standalone/drakvpn:441 standalone/drakvpn:480 #, c-format msgid "left" msgstr "" #: standalone/drakvpn:442 standalone/drakvpn:481 #, c-format msgid "leftcert" msgstr "" #: standalone/drakvpn:443 standalone/drakvpn:482 #, c-format msgid "leftrsasigkey" msgstr "" #: standalone/drakvpn:444 standalone/drakvpn:483 #, c-format msgid "leftsubnet" msgstr "" #: standalone/drakvpn:445 standalone/drakvpn:484 #, c-format msgid "leftnexthop" msgstr "" #: standalone/drakvpn:474 #, c-format msgid "" "Your %s file has several sections, or connections.\n" "\n" "You can now add a new section.\n" "Choose continue when you are done to write the data.\n" "" msgstr "" #: standalone/drakvpn:477 #, c-format msgid "section name" msgstr "" #: standalone/drakvpn:478 #, c-format msgid "authby" msgstr "" #: standalone/drakvpn:479 #, c-format msgid "auto" msgstr "" #: standalone/drakvpn:485 #, c-format msgid "right" msgstr "" #: standalone/drakvpn:486 #, c-format msgid "rightcert" msgstr "" #: standalone/drakvpn:487 #, c-format msgid "rightrsasigkey" msgstr "" #: standalone/drakvpn:488 #, c-format msgid "rightsubnet" msgstr "" #: standalone/drakvpn:489 #, c-format msgid "rightnexthop" msgstr "" #: standalone/drakvpn:497 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change the name of the section.\n" "" msgstr "" #: standalone/drakvpn:529 #, c-format msgid "" "Add a Security Policy.\n" "\n" "You can now add a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" "" msgstr "" #: standalone/drakvpn:562 standalone/drakvpn:812 #, c-format msgid "Edit section" msgstr "" #: standalone/drakvpn:563 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to edit \n" "and then click on next.\n" "" msgstr "" #: standalone/drakvpn:566 standalone/drakvpn:646 standalone/drakvpn:817 standalone/drakvpn:863 #, c-format msgid "Section names" msgstr "" #: standalone/drakvpn:576 #, c-format msgid "Can not edit!" msgstr "" #: standalone/drakvpn:577 #, c-format msgid "" "You cannot edit this section.\n" "\n" "This section is mandatory for Freeswan 2.X.\n" "One has to specify version 2.0 on the top\n" "of the %s file, and eventually, disable or\n" "enable the opportunistic encryption.\n" "" msgstr "" #: standalone/drakvpn:586 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the config setup section entries.\n" "Choose continue when you are done to write the data.\n" "" msgstr "" #: standalone/drakvpn:597 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the default section entries.\n" "Choose continue when you are done to write the data.\n" "" msgstr "" #: standalone/drakvpn:610 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the normal section entries.\n" "\n" "Choose continue when you are done to write the data.\n" "" msgstr "" #: standalone/drakvpn:631 #, c-format msgid "" "Edit a Security Policy.\n" "\n" "You can now edit a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" "" msgstr "" #: standalone/drakvpn:642 standalone/drakvpn:859 #, c-format msgid "Remove section" msgstr "" #: standalone/drakvpn:643 standalone/drakvpn:860 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to remove\n" "and then click on next.\n" "" msgstr "" #: standalone/drakvpn:672 #, c-format msgid "" "The racoon.conf file configuration.\n" "\n" "The contents of this file is divided into sections.\n" "You can now:\n" " - display \t\t (display the file contents)\n" " - add\t\t\t (add one section)\n" " - edit \t\t\t (modify parameters of an existing section)\n" " - remove \t\t (remove an existing section)\n" " - commit \t\t (writes the changes to the real file)" msgstr "" #: standalone/drakvpn:700 #, c-format msgid "" "The %s file does not exist\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose configure.\n" "" msgstr "" #: standalone/drakvpn:714 #, c-format msgid "racoonf.conf entries" msgstr "" #: standalone/drakvpn:715 #, c-format msgid "" "The 'add' sections step.\n" "\n" "Here below is the racoon.conf file skeleton:\n" "\t'path'\n" "\t'remote'\n" "\t'sainfo' \n" "\n" "Choose the section you would like to add.\n" "" msgstr "" #: standalone/drakvpn:721 #, c-format msgid "path" msgstr "" #: standalone/drakvpn:721 #, c-format msgid "remote" msgstr "" #: standalone/drakvpn:721 #, c-format msgid "sainfo" msgstr "" #: standalone/drakvpn:729 #, c-format msgid "" "The 'add path' section step.\n" "\n" "The path sections have to be on top of your racoon.conf file.\n" "\n" "Put your mouse over the certificate entry to obtain online help." msgstr "" #: standalone/drakvpn:732 #, c-format msgid "path type" msgstr "" #: standalone/drakvpn:736 #, c-format msgid "" "path include path: specifies a path to include\n" "a file. See File Inclusion.\n" "\tExample: path include '/etc/racoon'\n" "\n" "path pre_shared_key file: specifies a file containing\n" "pre-shared key(s) for various ID(s). See Pre-shared key File.\n" "\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n" "\n" "path certificate path: racoon(8) will search this directory\n" "if a certificate or certificate request is received.\n" "\tExample: path certificate '/etc/cert' ;\n" "\n" "File Inclusion: include file \n" "other configuration files can be included.\n" "\tExample: include \"remote.conf\" ;\n" "\n" "Pre-shared key File: Pre-shared key file defines a pair\n" "of the identifier and the shared secret key which are used at\n" "Pre-shared key authentication method in phase 1." msgstr "" #: standalone/drakvpn:756 standalone/drakvpn:849 #, c-format msgid "real file" msgstr "" #: standalone/drakvpn:779 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your racoon.conf file.\n" "\n" "You can now choose the remote settings.\n" "Choose continue or previous when you are done.\n" "" msgstr "" #: standalone/drakvpn:796 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your %s file.\n" "\n" "You can now choose the sainfo settings.\n" "Choose continue or previous when you are done.\n" "" msgstr "" #: standalone/drakvpn:813 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here in the list below the one you want\n" "to edit and then click on next.\n" "" msgstr "" #: standalone/drakvpn:824 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "\n" "You can now edit the remote section entries.\n" "\n" "Choose continue when you are done to write the data.\n" "" msgstr "" #: standalone/drakvpn:833 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the sainfo section entries.\n" "\n" "Choose continue when you are done to write the data." msgstr "" #: standalone/drakvpn:841 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow these path\n" "sections.\n" "\n" "You can now edit the path entries.\n" "\n" "Choose continue or previous when you are done.\n" "" msgstr "" #: standalone/drakvpn:848 #, c-format msgid "path_type" msgstr "" #: standalone/drakvpn:889 #, c-format msgid "" "Everything has been configured.\n" "\n" "You may now share resources through the Internet,\n" "in a secure way, using a VPN connection.\n" "\n" "You should make sure that that the tunnels shorewall\n" "section is configured." msgstr "" #: standalone/drakvpn:909 #, c-format msgid "Sainfo source address" msgstr "" #: standalone/drakvpn:910 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.209 is the source address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.1.0/24 is the source address" msgstr "" #: standalone/drakvpn:927 #, c-format msgid "Sainfo source protocol" msgstr "" #: standalone/drakvpn:928 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe first 'any' allows any protocol for the source" msgstr "" #: standalone/drakvpn:942 #, c-format msgid "Sainfo destination address" msgstr "" #: standalone/drakvpn:943 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.218 is the destination address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.2.0/24 is the destination address" msgstr "" #: standalone/drakvpn:960 #, c-format msgid "Sainfo destination protocol" msgstr "" #: standalone/drakvpn:961 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe last 'any' allows any protocol for the destination" msgstr "" #: standalone/drakvpn:975 #, c-format msgid "PFS group" msgstr "" #: standalone/drakvpn:977 #, c-format msgid "" "define the group of Diffie-Hellman exponentiations.\n" "If you do not require PFS then you can omit this directive.\n" "Any proposal will be accepted if you do not specify one.\n" "group is one of the following: modp768, modp1024, modp1536.\n" "Or you can define 1, 2, or 5 as the DH group number." msgstr "" #: standalone/drakvpn:982 #, c-format msgid "Lifetime number" msgstr "" #: standalone/drakvpn:983 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will not be proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n" "" msgstr "" #: standalone/drakvpn:999 #, c-format msgid "Lifetime unit" msgstr "" #: standalone/drakvpn:1001 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will not be proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and 'hour'.\n" "" msgstr "" #: standalone/drakvpn:1019 #, c-format msgid "Authentication algorithm" msgstr "" #: standalone/drakvpn:1021 #, c-format msgid "Compression algorithm" msgstr "" #: standalone/drakvpn:1022 #, c-format msgid "deflate" msgstr "" #: standalone/drakvpn:1029 #, c-format msgid "Remote" msgstr "" #: standalone/drakvpn:1030 #, c-format msgid "" "remote (address | anonymous) [[port]] { statements }\n" "specifies the parameters for IKE phase 1 for each remote node.\n" "The default port is 500. If anonymous is specified, the state-\n" "ments apply to all peers which do not match any other remote\n" "directive.\n" "\n" "Examples: \n" "\n" "remote anonymous\n" "remote ::1 [8000]" msgstr "" #: standalone/drakvpn:1038 #, c-format msgid "Exchange mode" msgstr "" #: standalone/drakvpn:1040 #, c-format msgid "" "defines the exchange mode for phase 1 when racoon is the\n" "initiator. Also it means the acceptable exchange mode\n" "when racoon is responder. More than one mode can be\n" "specified by separating them with a comma. All of the\n" "modes are acceptable. The first exchange mode is what\n" "racoon uses when it is the initiator.\n" "" msgstr "" #: standalone/drakvpn:1046 #, c-format msgid "Generate policy" msgstr "" #: standalone/drakvpn:1047 standalone/drakvpn:1063 standalone/drakvpn:1076 #, c-format msgid "off" msgstr "" #: standalone/drakvpn:1047 standalone/drakvpn:1063 standalone/drakvpn:1076 #, c-format msgid "on" msgstr "" #: standalone/drakvpn:1048 #, c-format msgid "" "This directive is for the responder. Therefore you\n" "should set passive on in order that racoon(8) only\n" "becomes a responder. If the responder does not have any\n" "policy in SPD during phase 2 negotiation, and the direc-\n" "tive is set on, then racoon(8) will choice the first pro-\n" "posal in the SA payload from the initiator, and generate\n" "policy entries from the proposal. It is useful to nego-\n" "tiate with the client which is allocated IP address\n" "dynamically. Note that inappropriate policy might be\n" "installed into the responder's SPD by the initiator. So\n" "that other communication might fail if such policies\n" "installed due to some policy mismatches between the ini-\n" "tiator and the responder. This directive is ignored in\n" "the initiator case. The default value is off." msgstr "" #: standalone/drakvpn:1062 #, c-format msgid "Passive" msgstr "" #: standalone/drakvpn:1064 #, c-format msgid "" "If you do not want to initiate the negotiation, set this\n" "to on. The default value is off. It is useful for a\n" "server." msgstr "" #: standalone/drakvpn:1067 #, c-format msgid "Certificate type" msgstr "" #: standalone/drakvpn:1069 #, c-format msgid "My certfile" msgstr "" #: standalone/drakvpn:1070 #, c-format msgid "Name of the certificate" msgstr "" #: standalone/drakvpn:1071 #, c-format msgid "My private key" msgstr "" #: standalone/drakvpn:1072 #, c-format msgid "Name of the private key" msgstr "" #: standalone/drakvpn:1073 #, c-format msgid "Peers certfile" msgstr "" #: standalone/drakvpn:1074 #, c-format msgid "Name of the peers certificate" msgstr "" #: standalone/drakvpn:1075 #, c-format msgid "Verify cert" msgstr "" #: standalone/drakvpn:1077 #, c-format msgid "" "If you do not want to verify the peer's certificate for\n" "some reason, set this to off. The default is on." msgstr "" #: standalone/drakvpn:1079 #, c-format msgid "My identifier" msgstr "" #: standalone/drakvpn:1080 #, c-format msgid "" "specifies the identifier sent to the remote host and the\n" "type to use in the phase 1 negotiation. address, FQDN,\n" "user_fqdn, keyid and asn1dn can be used as an idtype.\n" "they are used like:\n" "\tmy_identifier address [address];\n" "\t\tthe type is the IP address. This is the default\n" "\t\ttype if you do not specify an identifier to use.\n" "\tmy_identifier user_fqdn string;\n" "\t\tthe type is a USER_FQDN (user fully-qualified\n" "\t\tdomain name).\n" "\tmy_identifier FQDN string;\n" "\t\tthe type is a FQDN (fully-qualified domain name).\n" "\tmy_identifier keyid file;\n" "\t\tthe type is a KEY_ID.\n" "\tmy_identifier asn1dn [string];\n" "\t\tthe type is an ASN.1 distinguished name. If\n" "\t\tstring is omitted, racoon(8) will get DN from\n" "\t\tSubject field in the certificate.\n" "\n" "Examples: \n" "\n" "my_identifier user_fqdn \"myemail@mydomain.com\"" msgstr "" #: standalone/drakvpn:1100 #, c-format msgid "Peers identifier" msgstr "" #: standalone/drakvpn:1101 #, c-format msgid "Proposal" msgstr "" #: standalone/drakvpn:1103 #, c-format msgid "" "specify the encryption algorithm used for the\n" "phase 1 negotiation. This directive must be defined. \n" "algorithm is one of the following: \n" "\n" "DES, 3DES, blowfish, cast128 for oakley.\n" "\n" "For other transforms, this statement should not be used." msgstr "" #: standalone/drakvpn:1110 #, c-format msgid "Hash algorithm" msgstr "" #: standalone/drakvpn:1112 #, c-format msgid "DH group" msgstr "" #: standalone/drakvpn:1119 #, c-format msgid "Command" msgstr "" #: standalone/drakvpn:1120 #, c-format msgid "Source IP range" msgstr "" #: standalone/drakvpn:1121 #, c-format msgid "Destination IP range" msgstr "" #: standalone/drakvpn:1122 #, c-format msgid "Upper-layer protocol" msgstr "" #: standalone/drakvpn:1122 standalone/drakvpn:1129 #, c-format msgid "any" msgstr "" #: standalone/drakvpn:1124 #, c-format msgid "Flag" msgstr "" #: standalone/drakvpn:1125 #, c-format msgid "Direction" msgstr "" #: standalone/drakvpn:1126 #, c-format msgid "IPsec policy" msgstr "" #: standalone/drakvpn:1126 #, c-format msgid "ipsec" msgstr "" #: standalone/drakvpn:1126 #, c-format msgid "discard" msgstr "" #: standalone/drakvpn:1129 #, c-format msgid "Mode" msgstr "" #: standalone/drakvpn:1129 #, c-format msgid "tunnel" msgstr "" #: standalone/drakvpn:1129 #, c-format msgid "transport" msgstr "" #: standalone/drakvpn:1131 #, c-format msgid "Source/destination" msgstr "" #: standalone/drakvpn:1132 #, c-format msgid "require" msgstr "" #: standalone/drakvpn:1132 #, c-format msgid "default" msgstr "" #: standalone/drakvpn:1132 #, c-format msgid "use" msgstr "" #: standalone/drakvpn:1132 #, c-format msgid "unique" msgstr "" #: standalone/drakxtv:45 #, c-format msgid "USA (broadcast)" msgstr "" #: standalone/drakxtv:45 #, c-format msgid "USA (cable)" msgstr "" #: standalone/drakxtv:45 #, c-format msgid "USA (cable-hrc)" msgstr "" #: standalone/drakxtv:45 #, c-format msgid "Canada (cable)" msgstr "" #: standalone/drakxtv:46 #, c-format msgid "Japan (broadcast)" msgstr "" #: standalone/drakxtv:46 #, c-format msgid "Japan (cable)" msgstr "" #: standalone/drakxtv:46 #, c-format msgid "China (broadcast)" msgstr "" #: standalone/drakxtv:47 #, c-format msgid "West Europe" msgstr "" #: standalone/drakxtv:47 #, c-format msgid "East Europe" msgstr "" #: standalone/drakxtv:47 #, c-format msgid "France [SECAM]" msgstr "" #: standalone/drakxtv:48 #, c-format msgid "Newzealand" msgstr "" #: standalone/drakxtv:51 #, c-format msgid "Australian Optus cable TV" msgstr "" #: standalone/drakxtv:85 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" #: standalone/drakxtv:87 #, c-format msgid "TV norm:" msgstr "" #: standalone/drakxtv:88 #, c-format msgid "Area:" msgstr "" #: standalone/drakxtv:93 #, c-format msgid "Scanning for TV channels in progress..." msgstr "" #: standalone/drakxtv:103 #, c-format msgid "Scanning for TV channels" msgstr "" #: standalone/drakxtv:107 #, c-format msgid "There was an error while scanning for TV channels" msgstr "" #: standalone/drakxtv:110 #, c-format msgid "Have a nice day!" msgstr "" #: standalone/drakxtv:111 #, c-format msgid "" "Now, you can run xawtv (under X Window!) !\n" "" msgstr "" #: standalone/drakxtv:149 #, c-format msgid "No TV Card detected!" msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/drakxtv:151 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.mandrivalinux.com/en/hardware.php3" msgstr "" #: standalone/harddrake2:25 #, c-format msgid "Alternative drivers" msgstr "" #: standalone/harddrake2:26 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "" #: standalone/harddrake2:29 #, c-format msgid "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" #: standalone/harddrake2:31 standalone/harddrake2:146 #, c-format msgid "Bus identification" msgstr "" #: standalone/harddrake2:32 #, c-format msgid "- PCI and USB devices: this lists the vendor, device, subvendor and subdevice PCI/USB ids" msgstr "" #: standalone/harddrake2:35 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" #: standalone/harddrake2:38 #, c-format msgid "Drive capacity" msgstr "" #: standalone/harddrake2:38 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "" #: standalone/harddrake2:39 #, c-format msgid "this field describes the device" msgstr "" #: standalone/harddrake2:40 #, c-format msgid "Old device file" msgstr "" #: standalone/harddrake2:41 #, c-format msgid "old static device name used in dev package" msgstr "" #: standalone/harddrake2:42 #, c-format msgid "New devfs device" msgstr "" #: standalone/harddrake2:43 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "" #. -PO: here "module" is the "jargon term" for a kernel driver #: standalone/harddrake2:46 #, c-format msgid "Module" msgstr "" #: standalone/harddrake2:46 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "" #: standalone/harddrake2:47 #, c-format msgid "Extended partitions" msgstr "" #: standalone/harddrake2:47 #, c-format msgid "the number of extended partitions" msgstr "" #: standalone/harddrake2:48 #, c-format msgid "Geometry" msgstr "" #: standalone/harddrake2:48 #, c-format msgid "Cylinder/head/sectors geometry of the disk" msgstr "" #: standalone/harddrake2:49 #, c-format msgid "Disk controller" msgstr "" #: standalone/harddrake2:49 #, c-format msgid "the disk controller on the host side" msgstr "" #: standalone/harddrake2:50 #, c-format msgid "class of hardware device" msgstr "" #: standalone/harddrake2:51 standalone/harddrake2:83 standalone/printerdrake:224 #, c-format msgid "Model" msgstr "" #: standalone/harddrake2:51 #, c-format msgid "hard disk model" msgstr "" #: standalone/harddrake2:52 #, c-format msgid "network printer port" msgstr "" #: standalone/harddrake2:53 #, c-format msgid "Primary partitions" msgstr "" #: standalone/harddrake2:53 #, c-format msgid "the number of the primary partitions" msgstr "" #: standalone/harddrake2:54 #, c-format msgid "the vendor name of the device" msgstr "" #: standalone/harddrake2:55 #, c-format msgid "Bus PCI #" msgstr "" #: standalone/harddrake2:55 #, c-format msgid "the PCI bus on which the device is plugged" msgstr "" #: standalone/harddrake2:56 #, c-format msgid "PCI device #" msgstr "" #: standalone/harddrake2:56 #, c-format msgid "PCI device number" msgstr "" #: standalone/harddrake2:57 #, c-format msgid "PCI function #" msgstr "" #: standalone/harddrake2:57 #, c-format msgid "PCI function number" msgstr "" #: standalone/harddrake2:58 #, c-format msgid "Vendor ID" msgstr "" #: standalone/harddrake2:58 #, c-format msgid "this is the standard numerical identifier of the vendor" msgstr "" #: standalone/harddrake2:59 #, c-format msgid "Device ID" msgstr "" #: standalone/harddrake2:59 #, c-format msgid "this is the numerical identifier of the device" msgstr "" #: standalone/harddrake2:60 #, c-format msgid "Sub vendor ID" msgstr "" #: standalone/harddrake2:60 #, c-format msgid "this is the minor numerical identifier of the vendor" msgstr "" #: standalone/harddrake2:61 #, c-format msgid "Sub device ID" msgstr "" #: standalone/harddrake2:61 #, c-format msgid "this is the minor numerical identifier of the device" msgstr "" #: standalone/harddrake2:62 #, c-format msgid "Device USB ID" msgstr "" #: standalone/harddrake2:62 #, c-format msgid ".." msgstr "" #: standalone/harddrake2:66 #, c-format msgid "Bogomips" msgstr "" #: standalone/harddrake2:66 #, c-format msgid "the GNU/Linux kernel needs to run a calculation loop at boot time to initialize a timer counter. Its result is stored as bogomips as a way to \"benchmark\" the cpu." msgstr "" #: standalone/harddrake2:67 #, c-format msgid "Cache size" msgstr "" #: standalone/harddrake2:67 #, c-format msgid "size of the (second level) cpu cache" msgstr "" #. -PO: here "comas" is the medical coma, not the lexical coma!! #: standalone/harddrake2:70 #, c-format msgid "Coma bug" msgstr "" #: standalone/harddrake2:70 #, c-format msgid "whether this cpu has the Cyrix 6x86 Coma bug" msgstr "" #: standalone/harddrake2:71 #, c-format msgid "Cpuid family" msgstr "" #: standalone/harddrake2:71 #, c-format msgid "family of the cpu (eg: 6 for i686 class)" msgstr "" #: standalone/harddrake2:72 #, c-format msgid "Cpuid level" msgstr "" #: standalone/harddrake2:72 #, c-format msgid "information level that can be obtained through the cpuid instruction" msgstr "" #: standalone/harddrake2:73 #, c-format msgid "Frequency (MHz)" msgstr "" #: standalone/harddrake2:73 #, c-format msgid "the CPU frequency in MHz (Megahertz which in first approximation may be coarsely assimilated to number of instructions the cpu is able to execute per second)" msgstr "" #: standalone/harddrake2:74 #, c-format msgid "Flags" msgstr "" #: standalone/harddrake2:74 #, c-format msgid "CPU flags reported by the kernel" msgstr "" #: standalone/harddrake2:75 #, c-format msgid "Fdiv bug" msgstr "" #: standalone/harddrake2:76 #, c-format msgid "Early Intel Pentium chips manufactured have a bug in their floating point processor which did not achieve the required precision when performing a Floating point DIVision (FDIV)" msgstr "" #: standalone/harddrake2:77 #, c-format msgid "Is FPU present" msgstr "" #: standalone/harddrake2:77 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "" #: standalone/harddrake2:78 #, c-format msgid "Whether the FPU has an irq vector" msgstr "" #: standalone/harddrake2:78 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" #: standalone/harddrake2:79 #, c-format msgid "F00f bug" msgstr "" #: standalone/harddrake2:79 #, c-format msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "" #: standalone/harddrake2:80 #, c-format msgid "Halt bug" msgstr "" #: standalone/harddrake2:81 #, c-format msgid "Some of the early i486DX-100 chips cannot reliably return to operating mode after the \"halt\" instruction is used" msgstr "" #: standalone/harddrake2:82 #, c-format msgid "sub generation of the cpu" msgstr "" #: standalone/harddrake2:83 #, c-format msgid "generation of the cpu (eg: 8 for Pentium III, ...)" msgstr "" #: standalone/harddrake2:84 #, c-format msgid "Model name" msgstr "" #: standalone/harddrake2:84 #, c-format msgid "official vendor name of the cpu" msgstr "" #: standalone/harddrake2:85 #, c-format msgid "the name of the CPU" msgstr "" #: standalone/harddrake2:86 #, c-format msgid "Processor ID" msgstr "" #: standalone/harddrake2:86 #, c-format msgid "the number of the processor" msgstr "" #: standalone/harddrake2:87 #, c-format msgid "Model stepping" msgstr "" #: standalone/harddrake2:87 #, c-format msgid "stepping of the cpu (sub model (generation) number)" msgstr "" #: standalone/harddrake2:88 #, c-format msgid "the vendor name of the processor" msgstr "" #: standalone/harddrake2:89 #, c-format msgid "Write protection" msgstr "" #: standalone/harddrake2:89 #, c-format msgid "the WP flag in the CR0 register of the cpu enforce write protection at the memory page level, thus enabling the processor to prevent unchecked kernel accesses to user memory (aka this is a bug guard)" msgstr "" #: standalone/harddrake2:93 #, c-format msgid "Floppy format" msgstr "" #: standalone/harddrake2:93 #, c-format msgid "format of floppies supported by the drive" msgstr "" #: standalone/harddrake2:97 #, c-format msgid "Channel" msgstr "" #: standalone/harddrake2:97 #, c-format msgid "EIDE/SCSI channel" msgstr "" #: standalone/harddrake2:98 #, c-format msgid "Disk identifier" msgstr "" #: standalone/harddrake2:98 #, c-format msgid "usually the disk serial number" msgstr "" #: standalone/harddrake2:99 #, c-format msgid "Logical unit number" msgstr "" #: standalone/harddrake2:99 #, c-format msgid "" "the SCSI target number (LUN). SCSI devices connected to a host are uniquely identified by a\n" "channel number, a target id and a logical unit number" msgstr "" #. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...) #: standalone/harddrake2:106 #, c-format msgid "Installed size" msgstr "" #: standalone/harddrake2:106 #, c-format msgid "Installed size of the memory bank" msgstr "" #: standalone/harddrake2:107 #, c-format msgid "Enabled Size" msgstr "" #: standalone/harddrake2:107 #, c-format msgid "Enabled size of the memory bank" msgstr "" #: standalone/harddrake2:108 #, c-format msgid "type of the memory device" msgstr "" #: standalone/harddrake2:109 #, c-format msgid "Speed" msgstr "" #: standalone/harddrake2:109 #, c-format msgid "Speed of the memory bank" msgstr "" #: standalone/harddrake2:110 #, c-format msgid "Bank connections" msgstr "" #: standalone/harddrake2:111 #, c-format msgid "Socket designation of the memory bank" msgstr "" #: standalone/harddrake2:115 #, c-format msgid "Device file" msgstr "" #: standalone/harddrake2:115 #, c-format msgid "the device file used to communicate with the kernel driver for the mouse" msgstr "" #: standalone/harddrake2:116 #, c-format msgid "Emulated wheel" msgstr "" #: standalone/harddrake2:116 #, c-format msgid "whether the wheel is emulated or not" msgstr "" #: standalone/harddrake2:117 #, c-format msgid "the type of the mouse" msgstr "" #: standalone/harddrake2:118 #, c-format msgid "the name of the mouse" msgstr "" #: standalone/harddrake2:119 #, c-format msgid "Number of buttons" msgstr "" #: standalone/harddrake2:119 #, c-format msgid "the number of buttons the mouse has" msgstr "" #: standalone/harddrake2:120 #, c-format msgid "the type of bus on which the mouse is connected" msgstr "" #: standalone/harddrake2:121 #, c-format msgid "Mouse protocol used by X11" msgstr "" #: standalone/harddrake2:121 #, c-format msgid "the protocol that the graphical desktop use with the mouse" msgstr "" #: standalone/harddrake2:128 standalone/harddrake2:137 standalone/harddrake2:144 standalone/harddrake2:152 standalone/harddrake2:319 standalone/harddrake2:319 #, c-format msgid "Identification" msgstr "" #: standalone/harddrake2:129 standalone/harddrake2:145 #, c-format msgid "Connection" msgstr "" #: standalone/harddrake2:138 #, c-format msgid "Performances" msgstr "" #: standalone/harddrake2:139 #, c-format msgid "Bugs" msgstr "" #: standalone/harddrake2:140 #, c-format msgid "FPU" msgstr "" #: standalone/harddrake2:147 #, c-format msgid "Device" msgstr "" #: standalone/harddrake2:148 #, c-format msgid "Partitions" msgstr "" #: standalone/harddrake2:153 #, c-format msgid "Features" msgstr "" #. -PO: please keep all "/" characters !!! #: standalone/harddrake2:176 standalone/logdrake:76 standalone/printerdrake:146 standalone/printerdrake:159 standalone/printerdrake:171 #, c-format msgid "/_Options" msgstr "" #: standalone/harddrake2:177 standalone/harddrake2:203 standalone/logdrake:78 standalone/printerdrake:172 standalone/printerdrake:174 standalone/printerdrake:174 standalone/printerdrake:177 standalone/printerdrake:179 #, c-format msgid "/_Help" msgstr "" #: standalone/harddrake2:181 #, c-format msgid "/Autodetect _printers" msgstr "" #: standalone/harddrake2:182 #, c-format msgid "/Autodetect _modems" msgstr "" #: standalone/harddrake2:183 #, c-format msgid "/Autodetect _jaz drives" msgstr "" #: standalone/harddrake2:184 #, c-format msgid "/Autodetect parallel _zip drives" msgstr "" #: standalone/harddrake2:191 #, c-format msgid "/_Upload the hardware list" msgstr "" #: standalone/harddrake2:192 standalone/printerdrake:152 #, c-format msgid "/_Quit" msgstr "" #: standalone/harddrake2:205 #, c-format msgid "/_Fields description" msgstr "" #: standalone/harddrake2:207 #, c-format msgid "Harddrake help" msgstr "" #: standalone/harddrake2:216 #, c-format msgid "Once you've selected a device, you'll be able to see the device information in fields displayed on the right frame (\"Information\")" msgstr "" #: standalone/harddrake2:222 standalone/printerdrake:177 #, c-format msgid "/_Report Bug" msgstr "" #: standalone/harddrake2:224 standalone/printerdrake:179 #, c-format msgid "/_About..." msgstr "" #: standalone/harddrake2:225 #, c-format msgid "About Harddrake" msgstr "" #. -PO: Do not alter the and tags #: standalone/harddrake2:227 #, c-format msgid "" "This is HardDrake, a %s hardware configuration tool.\n" "Version: %s\n" "Author: Thierry Vignaud <tvignaud@mandriva.com>\n" "\n" "" msgstr "" #: standalone/harddrake2:242 #, c-format msgid "Harddrake2" msgstr "" #: standalone/harddrake2:256 #, c-format msgid "Detected hardware" msgstr "" #: standalone/harddrake2:261 #, c-format msgid "Configure module" msgstr "" #: standalone/harddrake2:268 #, c-format msgid "Run config tool" msgstr "" #: standalone/harddrake2:307 standalone/printerdrake:306 standalone/printerdrake:320 #, c-format msgid "Unknown" msgstr "" #: standalone/harddrake2:327 #, c-format msgid "Misc" msgstr "" #: standalone/harddrake2:342 #, c-format msgid "Click on a device in the left tree in order to display its information here." msgstr "" #: standalone/harddrake2:394 #, c-format msgid "secondary" msgstr "" #: standalone/harddrake2:394 #, c-format msgid "primary" msgstr "" #: standalone/harddrake2:398 #, c-format msgid "burner" msgstr "" #: standalone/harddrake2:398 #, c-format msgid "DVD" msgstr "" #: standalone/harddrake2:545 standalone/harddrake2:548 #, c-format msgid "Upload the hardware list" msgstr "" #: standalone/harddrake2:550 #, c-format msgid "Account:" msgstr "" #: standalone/harddrake2:552 #, c-format msgid "Hostname:" msgstr "" #: standalone/keyboarddrake:30 #, c-format msgid "Please, choose your keyboard layout." msgstr "" #: standalone/keyboarddrake:45 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "" #: standalone/localedrake:38 #, c-format msgid "LocaleDrake" msgstr "" #: standalone/localedrake:44 #, c-format msgid "You should install the following packages: %s" msgstr "" #. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit" #: standalone/localedrake:47 standalone/scannerdrake:135 #, c-format msgid ", " msgstr "" #: standalone/localedrake:55 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "" #: standalone/logdrake:49 #, c-format msgid "Mandriva Linux Tools Logs" msgstr "" #: standalone/logdrake:50 #, c-format msgid "Logdrake" msgstr "" #: standalone/logdrake:63 #, c-format msgid "Show only for the selected day" msgstr "" #: standalone/logdrake:70 #, c-format msgid "/File/_New" msgstr "" #: standalone/logdrake:70 #, c-format msgid "N" msgstr "" #: standalone/logdrake:71 #, c-format msgid "/File/_Open" msgstr "" #: standalone/logdrake:71 #, c-format msgid "O" msgstr "" #: standalone/logdrake:72 #, c-format msgid "/File/_Save" msgstr "" #: standalone/logdrake:72 #, c-format msgid "S" msgstr "" #: standalone/logdrake:73 #, c-format msgid "/File/Save _As" msgstr "" #: standalone/logdrake:74 #, c-format msgid "/File/-" msgstr "" #: standalone/logdrake:77 #, c-format msgid "/Options/Test" msgstr "" #: standalone/logdrake:79 #, c-format msgid "/Help/_About..." msgstr "" #: standalone/logdrake:108 #, c-format msgid "" "_:this is the auth.log log file\n" "Authentication" msgstr "" #: standalone/logdrake:109 #, c-format msgid "" "_:this is the user.log log file\n" "User" msgstr "" #: standalone/logdrake:110 #, c-format msgid "" "_:this is the /var/log/messages log file\n" "Messages" msgstr "" #: standalone/logdrake:111 #, c-format msgid "" "_:this is the /var/log/syslog log file\n" "Syslog" msgstr "" #: standalone/logdrake:115 #, c-format msgid "search" msgstr "" #: standalone/logdrake:127 #, c-format msgid "A tool to monitor your logs" msgstr "" #: standalone/logdrake:128 standalone/net_applet:316 standalone/net_monitor:93 #, c-format msgid "Settings" msgstr "" #: standalone/logdrake:133 #, c-format msgid "Matching" msgstr "" #: standalone/logdrake:134 #, c-format msgid "but not matching" msgstr "" #: standalone/logdrake:138 #, c-format msgid "Choose file" msgstr "" #: standalone/logdrake:150 #, c-format msgid "Calendar" msgstr "" #: standalone/logdrake:160 #, c-format msgid "Content of the file" msgstr "" #: standalone/logdrake:164 standalone/logdrake:402 #, c-format msgid "Mail alert" msgstr "" #: standalone/logdrake:171 #, c-format msgid "The alert wizard has failed unexpectedly:" msgstr "" #: standalone/logdrake:224 #, c-format msgid "please wait, parsing file: %s" msgstr "" #: standalone/logdrake:379 #, c-format msgid "Apache World Wide Web Server" msgstr "" #: standalone/logdrake:380 #, c-format msgid "Domain Name Resolver" msgstr "" #: standalone/logdrake:381 #, c-format msgid "Ftp Server" msgstr "" #: standalone/logdrake:382 #, c-format msgid "Postfix Mail Server" msgstr "" #: standalone/logdrake:383 #, c-format msgid "Samba Server" msgstr "" #: standalone/logdrake:385 #, c-format msgid "Webmin Service" msgstr "" #: standalone/logdrake:386 #, c-format msgid "Xinetd Service" msgstr "" #: standalone/logdrake:397 #, c-format msgid "Configure the mail alert system" msgstr "" #: standalone/logdrake:398 #, c-format msgid "Stop the mail alert system" msgstr "" #: standalone/logdrake:405 #, c-format msgid "Mail alert configuration" msgstr "" #: standalone/logdrake:406 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" "" msgstr "" #: standalone/logdrake:409 #, c-format msgid "What do you want to do?" msgstr "" #: standalone/logdrake:416 #, c-format msgid "Services settings" msgstr "" #: standalone/logdrake:417 #, c-format msgid "You will receive an alert if one of the selected services is no longer running" msgstr "" #: standalone/logdrake:424 #, c-format msgid "Load setting" msgstr "" #: standalone/logdrake:425 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "" #: standalone/logdrake:426 #, c-format msgid "" "_: load here is a noun, the load of the system\n" "Load" msgstr "" #: standalone/logdrake:431 #, c-format msgid "Alert configuration" msgstr "" #: standalone/logdrake:432 #, c-format msgid "Please enter your email address below " msgstr "" #: standalone/logdrake:433 #, c-format msgid "and enter the name (or the IP) of the SMTP server you wish to use" msgstr "" #: standalone/logdrake:452 #, c-format msgid "The wizard successfully configured the mail alert." msgstr "" #: standalone/logdrake:458 #, c-format msgid "The wizard successfully disabled the mail alert." msgstr "" #: standalone/logdrake:517 #, c-format msgid "Save as.." msgstr "" #: standalone/mousedrake:31 #, c-format msgid "Please choose your mouse type." msgstr "" #: standalone/mousedrake:44 #, c-format msgid "Emulate third button?" msgstr "" #: standalone/mousedrake:61 #, c-format msgid "Mouse test" msgstr "" #: standalone/mousedrake:64 #, c-format msgid "Please test your mouse:" msgstr "" #: standalone/net_applet:47 #, c-format msgid "Network is up on interface %s" msgstr "" #. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below #: standalone/net_applet:50 #, c-format msgid "Network is down on interface %s. Click on \"Configure Network\"" msgstr "" #: standalone/net_applet:56 standalone/net_monitor:468 #, c-format msgid "Connect %s" msgstr "" #: standalone/net_applet:57 standalone/net_monitor:468 #, c-format msgid "Disconnect %s" msgstr "" #: standalone/net_applet:58 #, c-format msgid "Monitor Network" msgstr "" #: standalone/net_applet:60 #, c-format msgid "Manage wireless networks" msgstr "" #: standalone/net_applet:61 #, c-format msgid "Configure Network" msgstr "" #: standalone/net_applet:63 #, c-format msgid "Watched interface" msgstr "" #: standalone/net_applet:72 #, c-format msgid "Profiles" msgstr "" #: standalone/net_applet:81 #, c-format msgid "Get Online Help" msgstr "" #: standalone/net_applet:305 #, c-format msgid "Interactive Firewall automatic mode" msgstr "" #: standalone/net_applet:310 #, c-format msgid "Always launch on startup" msgstr "" #: standalone/net_applet:314 #, c-format msgid "Wireless networks" msgstr "" #: standalone/net_applet:398 #, c-format msgid "Interactive Firewall: intrusion detected" msgstr "" #: standalone/net_applet:411 #, c-format msgid "What do you want to do with this attacker?" msgstr "" #: standalone/net_applet:414 #, c-format msgid "Attack details" msgstr "" #: standalone/net_applet:418 #, c-format msgid "Attack time: %s" msgstr "" #: standalone/net_applet:419 #, c-format msgid "Network interface: %s" msgstr "" #: standalone/net_applet:420 #, c-format msgid "Attack type: %s" msgstr "" #: standalone/net_applet:421 #, c-format msgid "Protocol: %s" msgstr "" #: standalone/net_applet:422 #, c-format msgid "Attacker IP address: %s" msgstr "" #: standalone/net_applet:423 #, c-format msgid "Attacker hostname: %s" msgstr "" #: standalone/net_applet:426 #, c-format msgid "Service attacked: %s" msgstr "" #: standalone/net_applet:427 #, c-format msgid "Port attacked: %s" msgstr "" #: standalone/net_applet:429 #, c-format msgid "Type of ICMP attack: %s" msgstr "" #: standalone/net_applet:434 #, c-format msgid "Always blacklist (do not ask again)" msgstr "" #: standalone/net_monitor:57 standalone/net_monitor:62 #, c-format msgid "Network Monitoring" msgstr "" #: standalone/net_monitor:98 #, c-format msgid "Global statistics" msgstr "" #: standalone/net_monitor:101 #, c-format msgid "Instantaneous" msgstr "" #: standalone/net_monitor:101 #, c-format msgid "Average" msgstr "" #: standalone/net_monitor:102 #, c-format msgid "" "Sending\n" "speed:" msgstr "" #: standalone/net_monitor:103 #, c-format msgid "" "Receiving\n" "speed:" msgstr "" #: standalone/net_monitor:107 #, c-format msgid "" "Connection\n" "time: " msgstr "" #: standalone/net_monitor:114 #, c-format msgid "Use same scale for received and transmitted" msgstr "" #: standalone/net_monitor:133 #, c-format msgid "Wait please, testing your connection..." msgstr "" #: standalone/net_monitor:182 standalone/net_monitor:195 #, c-format msgid "Disconnecting from Internet " msgstr "" #: standalone/net_monitor:182 standalone/net_monitor:195 #, c-format msgid "Connecting to Internet " msgstr "" #: standalone/net_monitor:226 #, c-format msgid "Disconnection from Internet failed." msgstr "" #: standalone/net_monitor:227 #, c-format msgid "Disconnection from Internet complete." msgstr "" #: standalone/net_monitor:229 #, c-format msgid "Connection complete." msgstr "" #: standalone/net_monitor:230 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandriva Linux Control Center." msgstr "" #: standalone/net_monitor:335 #, c-format msgid "Color configuration" msgstr "" #: standalone/net_monitor:383 standalone/net_monitor:403 #, c-format msgid "sent: " msgstr "" #: standalone/net_monitor:390 standalone/net_monitor:407 #, c-format msgid "received: " msgstr "" #: standalone/net_monitor:397 #, c-format msgid "average" msgstr "" #: standalone/net_monitor:400 #, c-format msgid "Local measure" msgstr "" #: standalone/net_monitor:461 #, c-format msgid "Warning, another internet connection has been detected, maybe using your network" msgstr "" #: standalone/net_monitor:472 #, c-format msgid "No internet connection configured" msgstr "" #: standalone/printerdrake:76 #, c-format msgid "Reading data of installed printers..." msgstr "" #: standalone/printerdrake:128 #, c-format msgid "%s Printer Management Tool" msgstr "" #: standalone/printerdrake:142 standalone/printerdrake:143 standalone/printerdrake:144 standalone/printerdrake:145 standalone/printerdrake:153 standalone/printerdrake:154 standalone/printerdrake:158 #, c-format msgid "/_Actions" msgstr "" #: standalone/printerdrake:142 standalone/printerdrake:154 #, c-format msgid "/_Add Printer" msgstr "" #: standalone/printerdrake:143 #, c-format msgid "/Set as _Default" msgstr "" #: standalone/printerdrake:144 #, c-format msgid "/_Edit" msgstr "" #: standalone/printerdrake:145 #, c-format msgid "/_Delete" msgstr "" #: standalone/printerdrake:146 #, c-format msgid "/_Expert mode" msgstr "" #: standalone/printerdrake:151 #, c-format msgid "/_Refresh" msgstr "" #: standalone/printerdrake:158 #, c-format msgid "/_Configure CUPS" msgstr "" #: standalone/printerdrake:171 #, c-format msgid "/Configure _Auto Administration" msgstr "" #: standalone/printerdrake:194 #, c-format msgid "Search:" msgstr "" #: standalone/printerdrake:197 #, c-format msgid "Apply filter" msgstr "" #: standalone/printerdrake:224 standalone/printerdrake:231 #, c-format msgid "Def." msgstr "" #: standalone/printerdrake:224 standalone/printerdrake:231 #, c-format msgid "Printer Name" msgstr "" #: standalone/printerdrake:224 #, c-format msgid "Connection Type" msgstr "" #: standalone/printerdrake:231 #, c-format msgid "Server Name" msgstr "" #. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:239 #, c-format msgid "Add Printer" msgstr "" #: standalone/printerdrake:239 #, c-format msgid "Add a new printer to the system" msgstr "" #. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:242 #, c-format msgid "Set as default" msgstr "" #: standalone/printerdrake:242 #, c-format msgid "Set selected printer as the default printer" msgstr "" #: standalone/printerdrake:245 #, c-format msgid "Edit selected printer" msgstr "" #: standalone/printerdrake:248 #, c-format msgid "Delete selected printer" msgstr "" #: standalone/printerdrake:251 #, c-format msgid "Refresh the list" msgstr "" #. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:254 #, c-format msgid "Configure CUPS" msgstr "" #: standalone/printerdrake:254 #, c-format msgid "Configure CUPS printing system" msgstr "" #: standalone/printerdrake:310 standalone/printerdrake:324 standalone/printerdrake:348 standalone/printerdrake:360 #, c-format msgid "Enabled" msgstr "" #: standalone/printerdrake:310 standalone/printerdrake:324 standalone/printerdrake:348 standalone/printerdrake:360 #, c-format msgid "Disabled" msgstr "" #: standalone/printerdrake:596 #, c-format msgid "Authors: " msgstr "" #. -PO: here %s is the version number #: standalone/printerdrake:606 #, c-format msgid "Printer Management %s" msgstr "" #: standalone/scannerdrake:51 #, c-format msgid "" "SANE packages need to be installed to use scanners.\n" "\n" "Do you want to install the SANE packages?" msgstr "" #: standalone/scannerdrake:55 #, c-format msgid "Aborting Scannerdrake." msgstr "" #: standalone/scannerdrake:60 #, c-format msgid "Could not install the packages needed to set up a scanner with Scannerdrake." msgstr "" #: standalone/scannerdrake:61 #, c-format msgid "Scannerdrake will not be started now." msgstr "" #: standalone/scannerdrake:67 standalone/scannerdrake:491 #, c-format msgid "Searching for configured scanners..." msgstr "" #: standalone/scannerdrake:71 standalone/scannerdrake:495 #, c-format msgid "Searching for new scanners..." msgstr "" #: standalone/scannerdrake:79 standalone/scannerdrake:517 #, c-format msgid "Re-generating list of configured scanners..." msgstr "" #: standalone/scannerdrake:101 #, c-format msgid "The %s is not supported by this version of %s." msgstr "" #: standalone/scannerdrake:104 #, c-format msgid "%s found on %s, configure it automatically?" msgstr "" #: standalone/scannerdrake:116 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "" #: standalone/scannerdrake:131 #, c-format msgid "Select a scanner model" msgstr "" #: standalone/scannerdrake:132 #, c-format msgid " (" msgstr "" #: standalone/scannerdrake:133 #, c-format msgid "Detected model: %s" msgstr "" #: standalone/scannerdrake:136 #, c-format msgid "Port: %s" msgstr "" #: standalone/scannerdrake:138 standalone/scannerdrake:141 #, c-format msgid " (UNSUPPORTED)" msgstr "" #: standalone/scannerdrake:144 #, c-format msgid "The %s is not supported under Linux." msgstr "" #: standalone/scannerdrake:171 standalone/scannerdrake:185 #, c-format msgid "Do not install firmware file" msgstr "" #: standalone/scannerdrake:175 standalone/scannerdrake:227 #, c-format msgid "It is possible that your %s needs its firmware to be uploaded everytime when it is turned on." msgstr "" #: standalone/scannerdrake:176 standalone/scannerdrake:228 #, c-format msgid "If this is the case, you can make this be done automatically." msgstr "" #: standalone/scannerdrake:177 standalone/scannerdrake:231 #, c-format msgid "To do so, you need to supply the firmware file for your scanner so that it can be installed." msgstr "" #: standalone/scannerdrake:178 standalone/scannerdrake:232 #, c-format msgid "You find the file on the CD or floppy coming with the scanner, on the manufacturer's home page, or on your Windows partition." msgstr "" #: standalone/scannerdrake:180 standalone/scannerdrake:239 #, c-format msgid "Install firmware file from" msgstr "" #: standalone/scannerdrake:200 #, c-format msgid "Select firmware file" msgstr "" #: standalone/scannerdrake:203 standalone/scannerdrake:262 #, c-format msgid "The firmware file %s does not exist or is unreadable!" msgstr "" #: standalone/scannerdrake:226 #, c-format msgid "It is possible that your scanners need their firmware to be uploaded everytime when they are turned on." msgstr "" #: standalone/scannerdrake:230 #, c-format msgid "To do so, you need to supply the firmware files for your scanners so that it can be installed." msgstr "" #: standalone/scannerdrake:233 #, c-format msgid "If you have already installed your scanner's firmware you can update the firmware here by supplying the new firmware file." msgstr "" #: standalone/scannerdrake:235 #, c-format msgid "Install firmware for the" msgstr "" #: standalone/scannerdrake:258 #, c-format msgid "Select firmware file for the %s" msgstr "" #: standalone/scannerdrake:276 #, c-format msgid "Could not install the firmware file for the %s!" msgstr "" #: standalone/scannerdrake:289 #, c-format msgid "The firmware file for your %s was successfully installed." msgstr "" #: standalone/scannerdrake:299 #, c-format msgid "The %s is unsupported" msgstr "" #: standalone/scannerdrake:304 #, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the %s Control Center in Hardware section." msgstr "" #: standalone/scannerdrake:308 standalone/scannerdrake:315 standalone/scannerdrake:345 #, c-format msgid "Auto-detect available ports" msgstr "" #: standalone/scannerdrake:310 standalone/scannerdrake:356 #, c-format msgid "Please select the device where your %s is attached" msgstr "" #: standalone/scannerdrake:311 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "" #: standalone/scannerdrake:313 standalone/scannerdrake:358 #, c-format msgid "choose device" msgstr "" #: standalone/scannerdrake:347 #, c-format msgid "Searching for scanners..." msgstr "" #: standalone/scannerdrake:383 #, c-format msgid "Setting up kernel modules..." msgstr "" #: standalone/scannerdrake:390 standalone/scannerdrake:397 #, c-format msgid "Attention!" msgstr "" #: standalone/scannerdrake:391 #, c-format msgid "" "Your %s cannot be configured fully automatically.\n" "\n" "Manual adjustments are required. Please edit the configuration file /etc/sane.d/%s.conf. " msgstr "" #: standalone/scannerdrake:392 standalone/scannerdrake:401 #, c-format msgid "More info in the driver's manual page. Run the command \"man sane-%s\" to read it." msgstr "" #: standalone/scannerdrake:394 standalone/scannerdrake:403 #, c-format msgid "After that you may scan documents using \"XSane\" or \"Kooka\" from Multimedia/Graphics in the applications menu." msgstr "" #: standalone/scannerdrake:398 #, c-format msgid "Your %s has been configured, but it is possible that additional manual adjustments are needed to get it to work. " msgstr "" #: standalone/scannerdrake:399 #, c-format msgid "If it does not appear in the list of configured scanners in the main window of Scannerdrake or if it does not work correctly, " msgstr "" #: standalone/scannerdrake:400 #, c-format msgid "edit the configuration file /etc/sane.d/%s.conf. " msgstr "" #: standalone/scannerdrake:406 #, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/Graphics in the applications menu." msgstr "" #: standalone/scannerdrake:431 #, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" "" msgstr "" #: standalone/scannerdrake:432 #, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" "" msgstr "" #: standalone/scannerdrake:435 standalone/scannerdrake:438 #, c-format msgid "" "There are no scanners found which are available on your system.\n" "" msgstr "" #: standalone/scannerdrake:452 #, c-format msgid "Search for new scanners" msgstr "" #: standalone/scannerdrake:458 #, c-format msgid "Add a scanner manually" msgstr "" #: standalone/scannerdrake:465 #, c-format msgid "Install/Update firmware files" msgstr "" #: standalone/scannerdrake:471 #, c-format msgid "Scanner sharing" msgstr "" #: standalone/scannerdrake:530 standalone/scannerdrake:695 #, c-format msgid "All remote machines" msgstr "" #: standalone/scannerdrake:542 standalone/scannerdrake:845 #, c-format msgid "This machine" msgstr "" #: standalone/scannerdrake:582 #, c-format msgid "Here you can choose whether the scanners connected to this machine should be accessible by remote machines and by which remote machines." msgstr "" #: standalone/scannerdrake:583 #, c-format msgid "You can also decide here whether scanners on remote machines should be made available on this machine." msgstr "" #: standalone/scannerdrake:586 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "" #: standalone/scannerdrake:588 #, c-format msgid "Scanner sharing to hosts: " msgstr "" #: standalone/scannerdrake:602 #, c-format msgid "Use scanners on remote computers" msgstr "" #: standalone/scannerdrake:605 #, c-format msgid "Use the scanners on hosts: " msgstr "" #: standalone/scannerdrake:632 standalone/scannerdrake:704 standalone/scannerdrake:854 #, c-format msgid "Sharing of local scanners" msgstr "" #: standalone/scannerdrake:633 #, c-format msgid "These are the machines on which the locally connected scanner(s) should be available:" msgstr "" #: standalone/scannerdrake:644 standalone/scannerdrake:794 #, c-format msgid "Add host" msgstr "" #: standalone/scannerdrake:650 standalone/scannerdrake:800 #, c-format msgid "Edit selected host" msgstr "" #: standalone/scannerdrake:659 standalone/scannerdrake:809 #, c-format msgid "Remove selected host" msgstr "" #: standalone/scannerdrake:683 standalone/scannerdrake:691 standalone/scannerdrake:696 standalone/scannerdrake:742 standalone/scannerdrake:833 standalone/scannerdrake:841 standalone/scannerdrake:846 standalone/scannerdrake:892 #, c-format msgid "Name/IP address of host:" msgstr "" #: standalone/scannerdrake:705 standalone/scannerdrake:855 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "" #: standalone/scannerdrake:716 standalone/scannerdrake:866 #, c-format msgid "" "You must enter a host name or an IP address.\n" "" msgstr "" #: standalone/scannerdrake:727 standalone/scannerdrake:877 #, c-format msgid "" "This host is already in the list, it cannot be added again.\n" "" msgstr "" #: standalone/scannerdrake:782 #, c-format msgid "Usage of remote scanners" msgstr "" #: standalone/scannerdrake:783 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "" #: standalone/scannerdrake:940 #, c-format msgid "" "saned needs to be installed to share the local scanner(s).\n" "\n" "Do you want to install the saned package?" msgstr "" #: standalone/scannerdrake:944 standalone/scannerdrake:948 #, c-format msgid "Your scanner(s) will not be available on the network." msgstr "" #: standalone/service_harddrake:105 #, c-format msgid "" "Some devices in the \"%s\" hardware class were removed:\n" "" msgstr "" #: standalone/service_harddrake:106 #, c-format msgid "" "- %s was removed\n" "" msgstr "" #: standalone/service_harddrake:109 #, c-format msgid "" "Some devices were added: %s\n" "" msgstr "" #: standalone/service_harddrake:110 #, c-format msgid "" "- %s was added\n" "" msgstr "" #: standalone/service_harddrake:207 #, c-format msgid "Hardware probing in progress" msgstr "" #: standalone/service_harddrake_confirm:7 #, c-format msgid "Hardware changes in \"%s\" class (%s seconds to answer)" msgstr "" #: standalone/service_harddrake_confirm:8 #, c-format msgid "Do you want to run the appropriate config tool?" msgstr "" #: steps.pm:14 #, c-format msgid "Language" msgstr "" #: steps.pm:15 #, c-format msgid "License" msgstr "" #: steps.pm:16 #, c-format msgid "Configure mouse" msgstr "" #: steps.pm:17 #, c-format msgid "Hard drive detection" msgstr "" #: steps.pm:18 #, c-format msgid "Select installation class" msgstr "" #: steps.pm:19 #, c-format msgid "Choose your keyboard" msgstr "" #: steps.pm:21 #, c-format msgid "Partitioning" msgstr "" #: steps.pm:22 #, c-format msgid "Format partitions" msgstr "" #: steps.pm:23 #, c-format msgid "Choose packages to install" msgstr "" #: steps.pm:24 #, c-format msgid "Install system" msgstr "" #: steps.pm:25 #, c-format msgid "Administrator password" msgstr "" #: steps.pm:26 #, c-format msgid "Add a user" msgstr "" #: steps.pm:27 #, c-format msgid "Configure networking" msgstr "" #: steps.pm:28 #, c-format msgid "Install bootloader" msgstr "" #: steps.pm:29 #, c-format msgid "Configure X" msgstr "" #: steps.pm:31 #, c-format msgid "Configure services" msgstr "" #: steps.pm:32 #, c-format msgid "Install updates" msgstr "" #: steps.pm:33 #, c-format msgid "Exit install" msgstr "" #: ugtk2.pm:899 #, c-format msgid "Is this correct?" msgstr "" #: ugtk2.pm:959 #, c-format msgid "No file chosen" msgstr "" #: ugtk2.pm:961 #, c-format msgid "You have chosen a file, not a directory" msgstr "" #: ugtk2.pm:963 #, c-format msgid "You have chosen a directory, not a file" msgstr "" #: ugtk2.pm:965 #, c-format msgid "No such directory" msgstr "" #: ugtk2.pm:965 #, c-format msgid "No such file" msgstr "" #: ugtk2.pm:1046 #, c-format msgid "Expand Tree" msgstr "" #: ugtk2.pm:1047 #, c-format msgid "Collapse Tree" msgstr "" #: ugtk2.pm:1048 #, c-format msgid "Toggle between flat and group sorted" msgstr "" #: wizards.pm:95 #, c-format msgid "" "%s is not installed\n" "Click \"Next\" to install or \"Cancel\" to quit" msgstr "" #: wizards.pm:99 #, c-format msgid "Installation failed" msgstr ""