# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR Free Software Foundation, Inc. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "POT-Creation-Date: 1999-10-13 13:44+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: ENCODING\n" #: ../Xconfigurator.pm_.c:164 msgid "Select a graphic card" msgstr "" #: ../Xconfigurator.pm_.c:165 msgid "Choose a X server" msgstr "" #: ../Xconfigurator.pm_.c:184 msgid "Select the memory size of your graphic card" msgstr "" #: ../Xconfigurator.pm_.c:197 msgid "Choose a monitor" msgstr "" #: ../Xconfigurator.pm_.c:200 msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" #: ../Xconfigurator.pm_.c:207 msgid "Horizontal refresh rate" msgstr "" #: ../Xconfigurator.pm_.c:207 msgid "Vertical refresh rate" msgstr "" #: ../Xconfigurator.pm_.c:246 msgid "Monitor not configured" msgstr "" #: ../Xconfigurator.pm_.c:249 msgid "Graphic card not configured yet" msgstr "" #: ../Xconfigurator.pm_.c:252 msgid "Resolutions not chosen yet" msgstr "" #: ../Xconfigurator.pm_.c:259 msgid "Do you want to test the configuration?" msgstr "" #: ../Xconfigurator.pm_.c:259 msgid "Test configuration" msgstr "" #: ../Xconfigurator.pm_.c:289 msgid "An error occurred:" msgstr "" #: ../Xconfigurator.pm_.c:291 msgid "" "\n" "try changing some parameters" msgstr "" #: ../Xconfigurator.pm_.c:312 #, c-format msgid "(leaving in %d seconds)" msgstr "" #: ../Xconfigurator.pm_.c:316 ../my_gtk.pm_.c:348 msgid "Is this correct?" msgstr "" #: ../Xconfigurator.pm_.c:324 msgid "An error occurred, try changing some parameters" msgstr "" #: ../Xconfigurator.pm_.c:332 ../Xconfigurator.pm_.c:481 msgid "Automatic resolutions" msgstr "" #: ../Xconfigurator.pm_.c:333 msgid "" "To find the available resolutions I will try different ones.\n" "Your screen will blink...\n" "You can switch if off if you want, you'll hear a beep when it's over" msgstr "" #: ../Xconfigurator.pm_.c:380 ../install_steps_interactive.pm_.c:450 #: ../install_steps_interactive.pm_.c:451 msgid "Resolution" msgstr "" #: ../Xconfigurator.pm_.c:414 msgid "Choose resolution and color depth" msgstr "" #: ../Xconfigurator.pm_.c:422 msgid "Show all" msgstr "" #: ../Xconfigurator.pm_.c:482 msgid "" "I can try to find the available resolutions (eg: 800x600).\n" "Sometimes, though, it may hang the machine.\n" "Do you want to try?" msgstr "" #: ../Xconfigurator.pm_.c:487 msgid "" "No valid modes found\n" "Try with another video card or monitor" msgstr "" #: ../Xconfigurator.pm_.c:672 #, c-format msgid "Keyboard layout: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:673 #, c-format msgid "Mouse type: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:674 #, c-format msgid "Mouse device: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:675 #, c-format msgid "Monitor: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:676 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:677 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:678 #, c-format msgid "Graphic card: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:679 #, c-format msgid "Graphic memory: %s kB\n" msgstr "" #: ../Xconfigurator.pm_.c:680 #, c-format msgid "XFree86 server: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:705 msgid "Change Monitor" msgstr "" #: ../Xconfigurator.pm_.c:706 msgid "Change Graphic card" msgstr "" #: ../Xconfigurator.pm_.c:707 msgid "Change Resolution" msgstr "" #: ../Xconfigurator.pm_.c:708 msgid "Automatical resolutions search" msgstr "" #: ../Xconfigurator.pm_.c:712 msgid "Show information" msgstr "" #: ../Xconfigurator.pm_.c:713 msgid "Test again" msgstr "" #: ../Xconfigurator.pm_.c:714 msgid "Quit" msgstr "" #: ../Xconfigurator.pm_.c:717 msgid "What do you want to do?" msgstr "" #: ../Xconfigurator.pm_.c:722 msgid "X at startup" msgstr "" #: ../Xconfigurator.pm_.c:723 msgid "" "I can set up your computer to automatically start X upon booting.\n" "Would you like X to start when you reboot?" msgstr "" #: ../Xconfigurator.pm_.c:728 msgid "X successfully configured" msgstr "" #: ../Xconfigurator.pm_.c:729 msgid "" "Configuration file has been written. Take a look at it before running " "'startx'.\n" "Within the server, press Ctrl, Alt and '+' simultaneously to cycle through " "video resolutions.\n" "Pressing Ctrl, Alt and Backspace simultaneously immediately exits the " "server\n" "For further configuration, refer to /usr/X11R6/lib/X11/doc/README.Config." msgstr "" #: ../Xconfigurator_consts.pm_.c:4 msgid "256 colors" msgstr "" #: ../Xconfigurator_consts.pm_.c:5 msgid "32 thousand colors" msgstr "" #: ../Xconfigurator_consts.pm_.c:6 msgid "65 thousand colors" msgstr "" #: ../Xconfigurator_consts.pm_.c:7 msgid "16 million colors" msgstr "" #: ../Xconfigurator_consts.pm_.c:8 msgid "4 billion colors" msgstr "" #: ../Xconfigurator_consts.pm_.c:57 msgid "256 kB" msgstr "" #: ../Xconfigurator_consts.pm_.c:58 msgid "512 kB" msgstr "" #: ../Xconfigurator_consts.pm_.c:59 msgid "1 MB" msgstr "" #: ../Xconfigurator_consts.pm_.c:60 msgid "2 MB" msgstr "" #: ../Xconfigurator_consts.pm_.c:61 msgid "4 MB" msgstr "" #: ../Xconfigurator_consts.pm_.c:62 msgid "8 MB" msgstr "" #: ../Xconfigurator_consts.pm_.c:63 msgid "16 MB or more" msgstr "" #: ../Xconfigurator_consts.pm_.c:67 ../Xconfigurator_consts.pm_.c:68 msgid "Standard VGA, 640x480 at 60 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:69 msgid "Super VGA, 800x600 at 56 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:70 msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)" msgstr "" #: ../Xconfigurator_consts.pm_.c:71 msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:72 msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:73 msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:74 msgid "High Frequency SVGA, 1024x768 at 70 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:75 msgid "Multi-frequency that can do 1280x1024 at 60 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:76 msgid "Multi-frequency that can do 1280x1024 at 74 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:77 msgid "Multi-frequency that can do 1280x1024 at 76 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:78 msgid "Monitor that can do 1600x1200 at 70 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:79 msgid "Monitor that can do 1600x1200 at 76 Hz" msgstr "" #: ../diskdrake.pm_.c:15 msgid "Create" msgstr "" #: ../diskdrake.pm_.c:16 msgid "Unmount" msgstr "" #: ../diskdrake.pm_.c:17 msgid "Delete" msgstr "" #: ../diskdrake.pm_.c:17 msgid "Format" msgstr "" #: ../diskdrake.pm_.c:17 ../diskdrake.pm_.c:378 msgid "Move" msgstr "" #: ../diskdrake.pm_.c:17 ../diskdrake.pm_.c:436 msgid "Resize" msgstr "" #: ../diskdrake.pm_.c:17 msgid "Type" msgstr "" #: ../diskdrake.pm_.c:18 msgid "Mount_point" msgstr "" #: ../diskdrake.pm_.c:32 msgid "Write /etc/fstab" msgstr "" #: ../diskdrake.pm_.c:33 msgid "Normal > Expert" msgstr "" #: ../diskdrake.pm_.c:34 msgid "Expert > Normal" msgstr "" #: ../diskdrake.pm_.c:35 msgid "Restore from file" msgstr "" #: ../diskdrake.pm_.c:36 msgid "Save in file" msgstr "" #: ../diskdrake.pm_.c:37 msgid "Restore from floppy" msgstr "" #: ../diskdrake.pm_.c:38 msgid "Save on floppy" msgstr "" #: ../diskdrake.pm_.c:39 ../install_steps_interactive.pm_.c:533 #: ../install_steps_interactive.pm_.c:642 msgid "Done" msgstr "" #: ../diskdrake.pm_.c:42 msgid "Clear all" msgstr "" #: ../diskdrake.pm_.c:43 msgid "Format all" msgstr "" #: ../diskdrake.pm_.c:44 msgid "Auto allocate" msgstr "" #: ../diskdrake.pm_.c:47 msgid "All primary partitions are used" msgstr "" #: ../diskdrake.pm_.c:47 msgid "I can't add any more partition" msgstr "" #: ../diskdrake.pm_.c:47 msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" #: ../diskdrake.pm_.c:50 msgid "Rescue partition table" msgstr "" #: ../diskdrake.pm_.c:51 msgid "Undo" msgstr "" #: ../diskdrake.pm_.c:52 msgid "Write partition table" msgstr "" #: ../diskdrake.pm_.c:94 msgid "Details" msgstr "" #: ../diskdrake.pm_.c:98 msgid "Legend" msgstr "" #: ../diskdrake.pm_.c:102 msgid "Empty" msgstr "" #: ../diskdrake.pm_.c:102 msgid "Ext2" msgstr "" #: ../diskdrake.pm_.c:102 msgid "FAT" msgstr "" #: ../diskdrake.pm_.c:102 msgid "Other" msgstr "" #: ../diskdrake.pm_.c:102 msgid "Swap" msgstr "" #: ../diskdrake.pm_.c:122 #, c-format msgid "After %s partition %s," msgstr "" #: ../diskdrake.pm_.c:122 ../diskdrake.pm_.c:369 ../diskdrake.pm_.c:396 msgid "Read carefully!" msgstr "" #: ../diskdrake.pm_.c:122 msgid "all data on this partition will be lost" msgstr "" #: ../diskdrake.pm_.c:140 ../install_any.pm_.c:177 ../install_steps.pm_.c:67 #: ../install_steps_interactive.pm_.c:37 msgid "Error" msgstr "" #: ../diskdrake.pm_.c:161 ../diskdrake.pm_.c:513 msgid "Mount point: " msgstr "" #: ../diskdrake.pm_.c:162 ../diskdrake.pm_.c:184 msgid "Device: " msgstr "" #: ../diskdrake.pm_.c:163 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "" #: ../diskdrake.pm_.c:164 ../diskdrake.pm_.c:187 msgid "Type: " msgstr "" #: ../diskdrake.pm_.c:165 #, c-format msgid "Start: sector /*%s\n" msgstr "" #: ../diskdrake.pm_.c:166 msgid "Size: %s MB (%s%%)" msgstr "" #: ../diskdrake.pm_.c:167 #, c-format msgid ", %s sectors" msgstr "" #: ../diskdrake.pm_.c:169 #, c-format msgid "Cylinder %d to cylinder %d\n" msgstr "" #: ../diskdrake.pm_.c:170 msgid "Formatted\n" msgstr "" #: ../diskdrake.pm_.c:171 msgid "Not formatted\n" msgstr "" #: ../diskdrake.pm_.c:172 msgid "Mounted\n" msgstr "" #: ../diskdrake.pm_.c:173 msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" #: ../diskdrake.pm_.c:185 #, c-format msgid "Size: %d MB\n" msgstr "" #: ../diskdrake.pm_.c:186 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "" #: ../diskdrake.pm_.c:188 #, c-format msgid "on bus %d id %d\n" msgstr "" #: ../diskdrake.pm_.c:200 msgid "Mount" msgstr "" #: ../diskdrake.pm_.c:202 msgid "Active" msgstr "" #: ../diskdrake.pm_.c:291 msgid "" "Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " "1024).\n" "Either you use LILO and it won't work, or you don't use LILO and you don't " "need /boot" msgstr "" #: ../diskdrake.pm_.c:295 msgid "" "The partition you've selected to add as root (/) is physically located " "beyond\n" "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" "If you plan to use the LILO boot manager, be careful to add a /boot partition" msgstr "" #: ../diskdrake.pm_.c:309 msgid "Quit without saving" msgstr "" #: ../diskdrake.pm_.c:309 msgid "Quit without writing the partition table?" msgstr "" #: ../diskdrake.pm_.c:324 msgid "changing type of" msgstr "" #: ../diskdrake.pm_.c:326 msgid "Change partition type" msgstr "" #: ../diskdrake.pm_.c:327 msgid "Which partition type do you want?" msgstr "" #: ../diskdrake.pm_.c:341 #, c-format msgid "Where do you want to mount device %s?" msgstr "" #: ../diskdrake.pm_.c:342 msgid "Mount point" msgstr "" #: ../diskdrake.pm_.c:363 msgid "formatting" msgstr "" #: ../diskdrake.pm_.c:369 msgid "After formatting all partitions," msgstr "" #: ../diskdrake.pm_.c:369 msgid "all data on these partitions will be lost" msgstr "" #: ../diskdrake.pm_.c:379 msgid "Which disk do you want to move to?" msgstr "" #: ../diskdrake.pm_.c:383 msgid "Sector" msgstr "" #: ../diskdrake.pm_.c:384 msgid "Which sector do you want to move to?" msgstr "" #: ../diskdrake.pm_.c:387 msgid "Moving" msgstr "" #: ../diskdrake.pm_.c:387 msgid "Moving partition..." msgstr "" #: ../diskdrake.pm_.c:396 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "" #: ../diskdrake.pm_.c:398 msgid "You'll need to reboot before the modification can take place" msgstr "" #: ../diskdrake.pm_.c:419 msgid "Computing fat filesystem bounds" msgstr "" #: ../diskdrake.pm_.c:419 ../diskdrake.pm_.c:464 msgid "Resizing" msgstr "" #: ../diskdrake.pm_.c:433 msgid "resizing" msgstr "" #: ../diskdrake.pm_.c:443 msgid "Choose the new size" msgstr "" #: ../diskdrake.pm_.c:443 ../install_steps_graphical.pm_.c:304 msgid "MB" msgstr "" #: ../diskdrake.pm_.c:490 msgid "Create a new partition" msgstr "" #: ../diskdrake.pm_.c:506 msgid "Start sector: " msgstr "" #: ../diskdrake.pm_.c:509 msgid "Size in MB: " msgstr "" #: ../diskdrake.pm_.c:512 msgid "Filesystem type: " msgstr "" #: ../diskdrake.pm_.c:514 msgid "Preference: " msgstr "" #: ../diskdrake.pm_.c:556 ../diskdrake.pm_.c:572 msgid "Select file" msgstr "" #: ../diskdrake.pm_.c:565 msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" #: ../diskdrake.pm_.c:573 msgid "Warning" msgstr "" #: ../diskdrake.pm_.c:574 msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" #: ../diskdrake.pm_.c:588 msgid "Trying to rescue partition table" msgstr "" #: ../fs.pm_.c:67 ../fs.pm_.c:73 #, c-format msgid "%s formatting of %s failed" msgstr "" #: ../fs.pm_.c:92 #, c-format msgid "don't know how to format %s in type %s" msgstr "" #: ../fs.pm_.c:105 msgid "nfs mount failed" msgstr "" #: ../fs.pm_.c:122 msgid "mount failed: " msgstr "" #: ../fs.pm_.c:133 #, c-format msgid "error unmounting %s: %s" msgstr "" #: ../fsedit.pm_.c:162 msgid "Mount points must begin with a leading /" msgstr "" #: ../fsedit.pm_.c:165 #, c-format msgid "There is already a partition with mount point %s" msgstr "" #: ../fsedit.pm_.c:294 #, c-format msgid "Error opening %s for writing: %s" msgstr "" #: ../fsedit.pm_.c:363 msgid "" "An error has occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" #: ../fsedit.pm_.c:378 msgid "You don't have any partitions!" msgstr "" #: ../help.pm_.c:7 ../help.pm_.c:238 msgid "Choose preferred language for install and system usage." msgstr "" #: ../help.pm_.c:10 ../help.pm_.c:241 msgid "Choose the layout corresponding to your keyboard from the list above" msgstr "" #: ../help.pm_.c:13 ../help.pm_.c:244 msgid "" "Choose \"Installation\" if there are no previous versions of Linux\n" "installed, or if you wish use to multiple distributions or versions.\n" "\n" "\n" "Choose \"Update\" if you wish to update a previous version of Mandrake\n" "Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) or 6.0 (Venus)." msgstr "" #: ../help.pm_.c:21 ../help.pm_.c:252 msgid "" "Select:\n" "\n" " - Beginner: If you have never installed Linux before, and wish to\n" "install the distribution elected \"Product of the year\" for 1999,\n" "click here.\n" "\n" " - Developer: If you are familiar with Linux and will be using the\n" "computer primarily for software development, you will find happiness\n" "here.\n" "\n" " - Server: If you wish to install a general purpose server, or the\n" "Linux distribution elected \"Distribution/Server\" for 1999, select\n" "this.\n" "\n" " - Expert: If you are fluent with GNU/Linux and want to perform\n" "a highly customized installation, this Install Class is for you." msgstr "" #: ../help.pm_.c:39 ../help.pm_.c:270 msgid "" "DrakX will attempt at first to look for one or more PCI\n" "SCSI adapter(s). If it finds it (or them) and knows which driver(s)\n" "to use, it will insert it (them) automatically.\n" "\n" "If your SCSI adapter is ISA, or is PCI but DrakX doesn't know\n" "which driver to use for this card, or if you have no SCSI adapters\n" "at all, you will then be prompted on whether you have one or not.\n" "If you have none, answer \"No\". If you have one or more, answer\n" "\"Yes\". A list of drivers will then pop up, from which you will\n" "have to select one.\n" "\n" "After you have selected the driver, DrakX will ask if you\n" "want to specify options for it. First, try and let the driver\n" "probe for the hardware: it usually works fine.\n" "\n" "If not, do not forget the information on your hardware that you\n" "could get from Windows (if you have it on your system), as\n" "suggested by the installation guide. These are the options\n" "you will need to provide to the driver." msgstr "" #: ../help.pm_.c:60 ../help.pm_.c:291 msgid "" "At this point, hard drive partitions must be defined. (Unless you\n" "are overwriting a previous install of Linux and have already defined\n" "your hard drive partitions as desired.) This operation consists of\n" "logically dividing the computer's hard drive capacity into separate\n" "areas for use.\n" "\n" "\n" "Two common partition are: the root partition (/), which is the starting\n" "point of the filesystem's directory hierarchy, and /boot, which contains\n" "all files necessary to start the operating system when the\n" "computer is first turned on.\n" "\n" "\n" "Because the effects of this process are usually irreversible, partitioning\n" "can be intimidating and stressful to the unexperienced. DiskDrake\n" "simplifies the process so that it need not be. Consult the documentation\n" "and take your time before proceeding." msgstr "" #: ../help.pm_.c:79 ../help.pm_.c:310 msgid "" "Any partitions that have been newly defined must be formatted for\n" "use (formatting meaning creating a filesystem). At this time, you may\n" "wish to re-format some already existing partitions to erase the data\n" "they contain. Note: it is not necessary to re-format pre-existing\n" "partitions, particularly if they contain files or data you wish to keep.\n" "Typically retained are /home and /usr/local." msgstr "" #: ../help.pm_.c:87 ../help.pm_.c:318 msgid "" "You may now select the packages you wish to install.\n" "\n" "\n" "Please note that some packages require the installation of others.\n" "These are referred to as package dependencies. The packages you select,\n" "and the packages they require will be automatically selected for\n" "install. It is impossible to install a package without installing all\n" "of its dependencies.\n" "\n" "\n" "Information on each category and specific package is available in the\n" "area titled \"Info\", located between list of packages and the five\n" "buttons \"Go\", \"Select more/less\" and \"Show more/less\"." msgstr "" #: ../help.pm_.c:102 ../help.pm_.c:333 msgid "" "The packages selected are now being installed. This operation\n" "should only take a few minutes." msgstr "" #: ../help.pm_.c:106 ../help.pm_.c:337 msgid "" "If DrakX failed to find your mouse, or if you want to\n" "check what it has done, you will be presented the list of mice\n" "above.\n" "\n" "\n" "If you agree with DrakX' settings, just jump to the section\n" "you want by clicking on it in the menu on the left. Otherwise,\n" "choose a mouse type in the menu which you think is the closest\n" "match for your mouse.\n" "\n" "In case of a serial mouse, you will also have to tell DrakX\n" "which serial port it is connected to." msgstr "" #: ../help.pm_.c:120 ../help.pm_.c:351 msgid "" "This section is dedicated to configuring a local area network,\n" "or LAN. If you answer \"Yes\" here, DrakX will try to find an\n" "Ethernet adapter on your machine. PCI adapters should be found and\n" "initialized automatically. However, if your peripheral is ISA,\n" "autodetection will not work, and you will have to choose a driver\n" "from the list that will appear then.\n" "\n" "\n" "As for SCSI adapters, you can let the driver probe for the adapter\n" "in the first time, otherwise you will have to specify the options\n" "to the driver that you will have fetched from Windows' control\n" "panel.\n" "\n" "\n" "If you install a Linux-Mandrake system on a machine which is part\n" "of an already existing network, the network administrator will\n" "have given you all necessary information (IP address, network\n" "submask or netmask for short, and hostname). If you're setting\n" "up a private network at home for example, you should choose\n" "addresses " msgstr "" #: ../help.pm_.c:142 ../help.pm_.c:145 ../help.pm_.c:232 ../help.pm_.c:373 #: ../help.pm_.c:376 ../help.pm_.c:463 ../install2.pm_.c:65 msgid "Help" msgstr "" #: ../help.pm_.c:148 msgid "" "Linux can deal with many types of printer. Each of these\n" "types require a different setup.\n" "\n" "\n" "If your printer is directly connected to your computer, select\n" "\"Local printer\". You will then have to tell which port your\n" "printer is connected to, and select the appropriate filter.\n" "\n" "\n" "If you want to access a printer located on a remote Unix machine,\n" "you will have to select \"Remote lpd queue\". In order to make\n" "it work, no username or password is required, but you will need\n" "to know the name of the printing queue on this server.\n" "\n" "\n" "If you want to access a SMB printer (which means, a printer located\n" "on a remote Windows 9x/NT machine), you will have to specify its\n" "SMB name (which is not its TCP/IP name), and possibly its IP address,\n" "plus the username, workgroup and password required in order to\n" "access the printer, and of course the name of the printer. The same goes\n" "for a NetWare printer, except that you need no workgroup information." msgstr "" #: ../help.pm_.c:171 ../help.pm_.c:402 msgid "" "You must now enter the root password for your Linux-Mandrake\n" "system. The password must be entered twice to verify that both\n" "password entries are identical.\n" "\n" "\n" "Root is the administrator of the system, and is the only user\n" "allowed to modify the system configuration. Therefore, choose\n" "this password carefully! Unauthorized use of the root account can\n" "be extremely dangerous to the integrity of the system and its data,\n" "and other systems connected to it. The password should be a\n" "mixture of alphanumeric characters and a least 8 characters long. It\n" "should *never* be written down. Do not make the password too long or\n" "complicated, though: you must be able to remember without too much\n" "effort." msgstr "" #: ../help.pm_.c:187 ../help.pm_.c:418 msgid "" "You may now create one or more \"regular\" user account(s), as\n" "opposed to the \"priviledged\" user account, root. You can create\n" "one or more account(s) for each person you want to allow to use\n" "the computer. Note that each user account will have its own\n" "preferences (graphical environment, program settings, etc.)\n" "and its own \"home directory\", in which these preferences are\n" "stored.\n" "\n" "\n" "First of all, create an account for yourself! Even if you will be the only " "user\n" "of the machine, you may NOT connect as root for daily use of the system: " "it's a\n" "very high security risk. Making the system unusable is very often a typo " "away.\n" "\n" "\n" "Therefore, you should connect to the system using the user account\n" "you will have created here, and login as root only for administration\n" "and maintenance purposes." msgstr "" #: ../help.pm_.c:206 ../help.pm_.c:437 msgid "" "Please, please, answer \"Yes\" here! Just for example, when you\n" "reinstall Windows, it will overwrite the boot sector. Unless you have\n" "made the bootdisk as suggested, you won't be able to boot into Linux\n" "any more!" msgstr "" #: ../help.pm_.c:212 ../help.pm_.c:443 msgid "" "You need to indicate where you wish\n" "to place the information required to boot to Linux.\n" "\n" "\n" "Unless you know exactly what you are doing, choose \"First sector of\n" "drive (MBR)\"." msgstr "" #: ../help.pm_.c:220 ../help.pm_.c:451 msgid "" "Now it's time to configure the X Window System, which is the\n" "core of the Linux GUI (Graphical User Interface). For this purpose,\n" "you must configure your video card and monitor. Most of these\n" "steps are automated, though, therefore your work may only consist\n" "of verifying what has been done and accept the settings :)\n" "\n" "When the configuration is over, X will be started (unless you\n" "ask DrakX not to) so that you can check and see if the\n" "settings suit you. If they don't, you can come back and\n" "change them, as many times as necessary." msgstr "" #: ../help.pm_.c:379 msgid "" "Linux can deal with many types of printer. Each of these\n" "types require a different setup.\n" "\n" "\n" "If your printer is directly connected to your computer, select\n" "\"Local printer\". You will then have to tell which port your\n" "printer is connected to, and select the appropriate filter.\n" "\n" "\n" "If you want to access a printer located on a remote Unix machine,\n" "you will have to select \"Remote lpd queue\". In order to make\n" "it work, no username or password is required, but you will need\n" "to know the name of the printing queue on this server.\n" "\n" "\n" "If you want to access a SMB printer (which means, a printer located\n" "on a remote Windows 9x/NT machine), you will have to specify its\n" "SMB name (which is not its TCP/IP name), and possibly its IP address,\n" "plus the username, workgroup and password required in order to\n" "access the printer, and of course the name of the printer.The same goes\n" "for a NetWare printer, except that you need no workgroup information." msgstr "" #: ../install2.pm_.c:39 msgid "Choose your language" msgstr "" #: ../install2.pm_.c:40 msgid "Select installation class" msgstr "" #: ../install2.pm_.c:41 msgid "Setup SCSI" msgstr "" #: ../install2.pm_.c:42 msgid "Choose install or upgrade" msgstr "" #: ../install2.pm_.c:43 msgid "Configure mouse" msgstr "" #: ../install2.pm_.c:44 msgid "Choose your keyboard" msgstr "" #: ../install2.pm_.c:45 msgid "Setup filesystems" msgstr "" #: ../install2.pm_.c:46 msgid "Format partitions" msgstr "" #: ../install2.pm_.c:47 msgid "Choose packages to install" msgstr "" #: ../install2.pm_.c:48 msgid "Install system" msgstr "" #: ../install2.pm_.c:49 msgid "Configure networking" msgstr "" #: ../install2.pm_.c:50 msgid "Configure timezone" msgstr "" #: ../install2.pm_.c:52 msgid "Configure printer" msgstr "" #: ../install2.pm_.c:53 ../install_steps_interactive.pm_.c:508 #: ../install_steps_interactive.pm_.c:509 msgid "Set root password" msgstr "" #: ../install2.pm_.c:54 msgid "Add a user" msgstr "" #: ../install2.pm_.c:55 msgid "Create a bootdisk" msgstr "" #: ../install2.pm_.c:56 msgid "Install bootloader" msgstr "" #: ../install2.pm_.c:57 msgid "Configure X" msgstr "" #: ../install2.pm_.c:58 msgid "Exit install" msgstr "" #: ../install2.pm_.c:80 msgid "beginner" msgstr "" #: ../install2.pm_.c:80 msgid "developer" msgstr "" #: ../install2.pm_.c:80 msgid "expert" msgstr "" #: ../install2.pm_.c:80 msgid "server" msgstr "" #: ../install2.pm_.c:292 msgid "Partitioning failed: no root filesystem" msgstr "" #: ../install2.pm_.c:457 msgid "Error reading file $f" msgstr "" #: ../install2.pm_.c:462 #, c-format msgid "Bad kickstart file %s (failed %s)" msgstr "" #: ../install_any.pm_.c:178 msgid "" "I can't read your partition table, it's too corrupted for me :(\n" "I'll try to go on blanking bad partitions" msgstr "" #: ../install_any.pm_.c:193 msgid "" "DiskDrake failed to read correctly the partition table.\n" "Continue at your own risk!" msgstr "" #: ../install_any.pm_.c:232 msgid "Information" msgstr "" #: ../install_any.pm_.c:233 #, c-format msgid "%s: This is not a root partition, please select another one." msgstr "" #: ../install_any.pm_.c:235 msgid "No root partition found" msgstr "" #: ../install_steps.pm_.c:68 msgid "" "An error occurred, but I don't know how to handle it nicely,\n" "so continue at your own risk :(" msgstr "" #: ../install_steps.pm_.c:123 #, c-format msgid "Duplicate mount point %s" msgstr "" #: ../install_steps.pm_.c:316 msgid "No floppy drive available" msgstr "" #: ../install_steps_graphical.pm_.c:256 msgid "You must have a swap partition" msgstr "" #: ../install_steps_graphical.pm_.c:259 msgid "" "You don't have a swap partition\n" "Continue anyway?" msgstr "" #: ../install_steps_graphical.pm_.c:304 msgid "Total size: " msgstr "" #: ../install_steps_graphical.pm_.c:315 #, c-format msgid "Version: %s\n" msgstr "" #: ../install_steps_graphical.pm_.c:316 #, c-format msgid "Size: %d KB\n" msgstr "" #: ../install_steps_graphical.pm_.c:317 #, c-format msgid "" "Summary: %s\n" "\n" msgstr "" #: ../install_steps_graphical.pm_.c:429 msgid "Choose the packages you want to install" msgstr "" #: ../install_steps_graphical.pm_.c:432 msgid "Info" msgstr "" #: ../install_steps_graphical.pm_.c:440 msgid "Go" msgstr "" #: ../install_steps_graphical.pm_.c:441 msgid "Select less" msgstr "" #: ../install_steps_graphical.pm_.c:442 msgid "Select more" msgstr "" #: ../install_steps_graphical.pm_.c:443 msgid "Show less" msgstr "" #: ../install_steps_graphical.pm_.c:444 msgid "Show more" msgstr "" #: ../install_steps_graphical.pm_.c:462 msgid "Installing" msgstr "" #: ../install_steps_graphical.pm_.c:468 msgid "Please wait, " msgstr "" #: ../install_steps_graphical.pm_.c:470 msgid "Time remaining " msgstr "" #: ../install_steps_graphical.pm_.c:471 msgid "Total time " msgstr "" #: ../install_steps_graphical.pm_.c:476 msgid "Preparing installation" msgstr "" #: ../install_steps_graphical.pm_.c:497 #, c-format msgid "Installing package %s" msgstr "" #: ../install_steps_graphical.pm_.c:522 msgid "Go on anyway?" msgstr "" #: ../install_steps_graphical.pm_.c:522 msgid "There was an error ordering packages:" msgstr "" #: ../install_steps_graphical.pm_.c:546 msgid "Use existing configuration for X11?" msgstr "" #: ../install_steps_graphical.pm_.c:619 ../interactive.pm_.c:47 #: ../interactive.pm_.c:57 ../my_gtk.pm_.c:194 ../my_gtk.pm_.c:348 #: ../my_gtk.pm_.c:438 msgid "Ok" msgstr "" #: ../install_steps_interactive.pm_.c:37 msgid "An error occurred" msgstr "" #: ../install_steps_interactive.pm_.c:53 msgid "Which language do you want?" msgstr "" #: ../install_steps_interactive.pm_.c:60 msgid "Wanring no wrranty, be carfull it's gonna explose ytou romcpature" msgstr "" #: ../install_steps_interactive.pm_.c:61 msgid "Accept" msgstr "" #: ../install_steps_interactive.pm_.c:61 msgid "Refuse" msgstr "" #: ../install_steps_interactive.pm_.c:69 msgid "What is your keyboard layout?" msgstr "" #: ../install_steps_interactive.pm_.c:79 msgid "Install/Upgrade" msgstr "" #: ../install_steps_interactive.pm_.c:80 msgid "Is this an install or an upgrade?" msgstr "" #: ../install_steps_interactive.pm_.c:81 msgid "Install" msgstr "" #: ../install_steps_interactive.pm_.c:81 msgid "Upgrade" msgstr "" #: ../install_steps_interactive.pm_.c:89 msgid "Root Partition" msgstr "" #: ../install_steps_interactive.pm_.c:90 msgid "What is the root partition (/) of your system?" msgstr "" #: ../install_steps_interactive.pm_.c:99 msgid "Install Class" msgstr "" #: ../install_steps_interactive.pm_.c:100 msgid "What installation class do you want?" msgstr "" #: ../install_steps_interactive.pm_.c:112 msgid "What is the type of your mouse?" msgstr "" #: ../install_steps_interactive.pm_.c:116 msgid "Emulate third button?" msgstr "" #: ../install_steps_interactive.pm_.c:119 msgid "Mouse Port" msgstr "" #: ../install_steps_interactive.pm_.c:120 msgid "Which serial port is your mouse connected to?" msgstr "" #: ../install_steps_interactive.pm_.c:133 msgid "no available partitions" msgstr "" #: ../install_steps_interactive.pm_.c:135 #, c-format msgid "(%dMb)" msgstr "" #: ../install_steps_interactive.pm_.c:142 msgid "Which partition do you want to use as your root partition" msgstr "" #: ../install_steps_interactive.pm_.c:149 msgid "Choose the mount points" msgstr "" #: ../install_steps_interactive.pm_.c:161 msgid "You need to reboot for the partition table modifications to take place" msgstr "" #: ../install_steps_interactive.pm_.c:177 msgid "Choose the partitions you want to format" msgstr "" #: ../install_steps_interactive.pm_.c:187 #, c-format msgid "Formatting partition %s" msgstr "" #: ../install_steps_interactive.pm_.c:195 msgid "Looking for available packages" msgstr "" #: ../install_steps_interactive.pm_.c:201 msgid "Finding packages to upgrade" msgstr "" #: ../install_steps_interactive.pm_.c:211 msgid "Keep the current IP configuration" msgstr "" #: ../install_steps_interactive.pm_.c:212 msgid "Reconfigure network now" msgstr "" #: ../install_steps_interactive.pm_.c:213 msgid "Do not set up networking" msgstr "" #: ../install_steps_interactive.pm_.c:215 #: ../install_steps_interactive.pm_.c:221 msgid "Network Configuration" msgstr "" #: ../install_steps_interactive.pm_.c:216 msgid "Local networking has already been configured. Do you want to:" msgstr "" #: ../install_steps_interactive.pm_.c:222 msgid "Do you want to configure LAN (not dialup) networking for your system?" msgstr "" #: ../install_steps_interactive.pm_.c:229 msgid "no network card found" msgstr "" #: ../install_steps_interactive.pm_.c:256 #, c-format msgid "Configuring network device %s" msgstr "" #: ../install_steps_interactive.pm_.c:257 msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" #: ../install_steps_interactive.pm_.c:260 msgid "IP address:" msgstr "" #: ../install_steps_interactive.pm_.c:260 msgid "Netmask:" msgstr "" #: ../install_steps_interactive.pm_.c:265 #: ../install_steps_interactive.pm_.c:404 msgid "IP address should be in format 1.2.3.4" msgstr "" #: ../install_steps_interactive.pm_.c:283 msgid "Configuring network" msgstr "" #: ../install_steps_interactive.pm_.c:284 msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one" msgstr "" #: ../install_steps_interactive.pm_.c:288 msgid "DNS server:" msgstr "" #: ../install_steps_interactive.pm_.c:288 msgid "Gateway device:" msgstr "" #: ../install_steps_interactive.pm_.c:288 msgid "Gateway:" msgstr "" #: ../install_steps_interactive.pm_.c:288 msgid "Host name:" msgstr "" #: ../install_steps_interactive.pm_.c:298 msgid "Is your hardware clock set to GMT?" msgstr "" #: ../install_steps_interactive.pm_.c:300 msgid "Which is your timezone?" msgstr "" #: ../install_steps_interactive.pm_.c:310 msgid "Printer" msgstr "" #: ../install_steps_interactive.pm_.c:311 msgid "Would you like to configure a printer?" msgstr "" #: ../install_steps_interactive.pm_.c:327 msgid "Local Printer Options" msgstr "" #: ../install_steps_interactive.pm_.c:328 msgid "" "Every print queue (which print jobs are directed to) needs a\n" "name (often lp) and a spool directory associated with it. What\n" "name and directory should be used for this queue?" msgstr "" #: ../install_steps_interactive.pm_.c:331 msgid "Name of queue:" msgstr "" #: ../install_steps_interactive.pm_.c:331 msgid "Spool directory:" msgstr "" #: ../install_steps_interactive.pm_.c:342 msgid "Select Printer Connection" msgstr "" #: ../install_steps_interactive.pm_.c:343 msgid "How is the printer connected?" msgstr "" #: ../install_steps_interactive.pm_.c:351 msgid "Detecting devices..." msgstr "" #: ../install_steps_interactive.pm_.c:351 msgid "Test ports" msgstr "" #: ../install_steps_interactive.pm_.c:364 #, c-format msgid "A printer, model \"%s\", has been detected on " msgstr "" #: ../install_steps_interactive.pm_.c:371 msgid "Local Printer Device" msgstr "" #: ../install_steps_interactive.pm_.c:372 msgid "" "What device is your printer connected to \n" "(note that /dev/lp0 is equivalent to LPT1:)?\n" msgstr "" #: ../install_steps_interactive.pm_.c:373 msgid "Printer Device:" msgstr "" #: ../install_steps_interactive.pm_.c:379 msgid "Remote lpd Printer Options" msgstr "" #: ../install_steps_interactive.pm_.c:380 msgid "" "To use a remote lpd print queue, you need to supply\n" "the hostname of the printer server and the queue name\n" "on that server which jobs should be placed in." msgstr "" #: ../install_steps_interactive.pm_.c:383 msgid "Remote hostname:" msgstr "" #: ../install_steps_interactive.pm_.c:383 msgid "Remote queue:" msgstr "" #: ../install_steps_interactive.pm_.c:389 msgid "SMB (Windows 9x/NT) Printer Options" msgstr "" #: ../install_steps_interactive.pm_.c:390 msgid "" "To print to a SMB printer, you need to provide the\n" "SMB host name (Note! It may be different from its\n" "TCP/IP hostname!) and possibly the IP address of the print server, as\n" "well as the share name for the printer you wish to access and any\n" "applicable user name, password, and workgroup information." msgstr "" #: ../install_steps_interactive.pm_.c:395 msgid "SMB server IP:" msgstr "" #: ../install_steps_interactive.pm_.c:395 msgid "SMB server host:" msgstr "" #: ../install_steps_interactive.pm_.c:396 #: ../install_steps_interactive.pm_.c:418 #: ../install_steps_interactive.pm_.c:510 msgid "Password:" msgstr "" #: ../install_steps_interactive.pm_.c:396 msgid "Share name:" msgstr "" #: ../install_steps_interactive.pm_.c:396 #: ../install_steps_interactive.pm_.c:418 msgid "User name:" msgstr "" #: ../install_steps_interactive.pm_.c:397 msgid "Workgroup:" msgstr "" #: ../install_steps_interactive.pm_.c:412 msgid "NetWare Printer Options" msgstr "" #: ../install_steps_interactive.pm_.c:413 msgid "" "To print to a NetWare printer, you need to provide the\n" "NetWare print server name (Note! it may be different from its\n" "TCP/IP hostname!) as well as the print queue name for the printer you\n" "wish to access and any applicable user name and password." msgstr "" #: ../install_steps_interactive.pm_.c:417 msgid "Print Queue Name:" msgstr "" #: ../install_steps_interactive.pm_.c:417 msgid "Printer Server:" msgstr "" #: ../install_steps_interactive.pm_.c:428 msgid "Configure Printer" msgstr "" #: ../install_steps_interactive.pm_.c:429 msgid "What type of printer do you have?" msgstr "" #: ../install_steps_interactive.pm_.c:440 #: ../install_steps_interactive.pm_.c:441 msgid "Paper Size" msgstr "" #: ../install_steps_interactive.pm_.c:460 msgid "CRLF" msgstr "" #: ../install_steps_interactive.pm_.c:461 msgid "Fix stair-stepping text?" msgstr "" #: ../install_steps_interactive.pm_.c:477 msgid "Configure Uniprint Driver" msgstr "" #: ../install_steps_interactive.pm_.c:478 msgid "You may now set the Uniprint driver options for this printer." msgstr "" #: ../install_steps_interactive.pm_.c:486 msgid "Configure Color Depth" msgstr "" #: ../install_steps_interactive.pm_.c:487 msgid "You may now configure the color options for this printer." msgstr "" #: ../install_steps_interactive.pm_.c:510 msgid "Password (again):" msgstr "" #: ../install_steps_interactive.pm_.c:514 #: ../install_steps_interactive.pm_.c:546 msgid "Please try again" msgstr "" #: ../install_steps_interactive.pm_.c:514 #: ../install_steps_interactive.pm_.c:546 msgid "The passwords do not match" msgstr "" #: ../install_steps_interactive.pm_.c:515 msgid "This password is too simple" msgstr "" #: ../install_steps_interactive.pm_.c:533 msgid "Add user" msgstr "" #: ../install_steps_interactive.pm_.c:534 #, c-format msgid "(already added %s)" msgstr "" #: ../install_steps_interactive.pm_.c:534 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" #: ../install_steps_interactive.pm_.c:535 #: ../install_steps_interactive.pm_.c:620 msgid "Password" msgstr "" #: ../install_steps_interactive.pm_.c:535 msgid "Password (again)" msgstr "" #: ../install_steps_interactive.pm_.c:535 msgid "Real name" msgstr "" #: ../install_steps_interactive.pm_.c:535 msgid "Shell" msgstr "" #: ../install_steps_interactive.pm_.c:535 msgid "User name" msgstr "" #: ../install_steps_interactive.pm_.c:548 msgid "Please give a user name" msgstr "" #: ../install_steps_interactive.pm_.c:549 msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" #: ../install_steps_interactive.pm_.c:569 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO on your system, or another operating system removes LILO, or LILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?" msgstr "" #: ../install_steps_interactive.pm_.c:577 msgid "Sorry, no floppy drive available" msgstr "" #: ../install_steps_interactive.pm_.c:580 msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "" #: ../install_steps_interactive.pm_.c:585 #, c-format msgid "Insert a floppy in drive %s" msgstr "" #: ../install_steps_interactive.pm_.c:586 msgid "Creating bootdisk" msgstr "" #: ../install_steps_interactive.pm_.c:593 msgid "Preparing bootloader" msgstr "" #: ../install_steps_interactive.pm_.c:603 msgid "First sector of boot partition" msgstr "" #: ../install_steps_interactive.pm_.c:603 msgid "First sector of drive (MBR)" msgstr "" #: ../install_steps_interactive.pm_.c:608 msgid "LILO Installation" msgstr "" #: ../install_steps_interactive.pm_.c:609 msgid "Where do you want to install the bootloader?" msgstr "" #: ../install_steps_interactive.pm_.c:612 msgid "Do you want to use LILO?" msgstr "" #: ../install_steps_interactive.pm_.c:615 msgid "Boot device" msgstr "" #: ../install_steps_interactive.pm_.c:616 msgid "Linear (needed for some SCSI drives)" msgstr "" #: ../install_steps_interactive.pm_.c:616 msgid "linear" msgstr "" #: ../install_steps_interactive.pm_.c:617 msgid "Compact" msgstr "" #: ../install_steps_interactive.pm_.c:617 msgid "compact" msgstr "" #: ../install_steps_interactive.pm_.c:618 msgid "Delay before booting default image" msgstr "" #: ../install_steps_interactive.pm_.c:619 msgid "Video mode" msgstr "" #: ../install_steps_interactive.pm_.c:621 msgid "Restrict command line options" msgstr "" #: ../install_steps_interactive.pm_.c:621 msgid "restrict" msgstr "" #: ../install_steps_interactive.pm_.c:627 msgid "LILO main options" msgstr "" #: ../install_steps_interactive.pm_.c:631 msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" #: ../install_steps_interactive.pm_.c:640 msgid "" "Here are the following entries in LILO.\n" "You can add some more or change the existent ones." msgstr "" #: ../install_steps_interactive.pm_.c:642 msgid "Add" msgstr "" #: ../install_steps_interactive.pm_.c:660 msgid "Image" msgstr "" #: ../install_steps_interactive.pm_.c:661 #: ../install_steps_interactive.pm_.c:669 msgid "Root" msgstr "" #: ../install_steps_interactive.pm_.c:662 msgid "Append" msgstr "" #: ../install_steps_interactive.pm_.c:663 msgid "Initrd" msgstr "" #: ../install_steps_interactive.pm_.c:664 msgid "Read-write" msgstr "" #: ../install_steps_interactive.pm_.c:670 msgid "Table" msgstr "" #: ../install_steps_interactive.pm_.c:671 msgid "Unsafe" msgstr "" #: ../install_steps_interactive.pm_.c:676 msgid "Label" msgstr "" #: ../install_steps_interactive.pm_.c:678 msgid "Default" msgstr "" #: ../install_steps_interactive.pm_.c:697 msgid "Installation of LILO failed. The following error occured:" msgstr "" #: ../install_steps_interactive.pm_.c:708 msgid "" "Some steps are not completed.\n" "Do you really want to quit now?" msgstr "" #: ../install_steps_interactive.pm_.c:712 msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "For information on fixes which are available for this release of " "Linux-Mandrake,\n" "consult the Errata available from http://www.linux-mandrake.com/.\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Linux-Mandrake User's Guide." msgstr "" #: ../install_steps_interactive.pm_.c:729 #, c-format msgid "Installing driver for %s card %s" msgstr "" #: ../install_steps_interactive.pm_.c:730 #, c-format msgid "(module %s)" msgstr "" #: ../install_steps_interactive.pm_.c:740 #, c-format msgid "What %s card do you have?" msgstr "" #: ../install_steps_interactive.pm_.c:747 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" #: ../install_steps_interactive.pm_.c:752 msgid "Autoprobe" msgstr "" #: ../install_steps_interactive.pm_.c:752 msgid "Specify options" msgstr "" #: ../install_steps_interactive.pm_.c:756 #, c-format msgid "You may now provide its options to module %s." msgstr "" #: ../install_steps_interactive.pm_.c:762 #, c-format msgid "" "You may now provide its options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" #: ../install_steps_interactive.pm_.c:765 msgid "Module options:" msgstr "" #: ../install_steps_interactive.pm_.c:775 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" #: ../install_steps_interactive.pm_.c:788 msgid "Skip PCMCIA probing" msgstr "" #: ../install_steps_interactive.pm_.c:789 msgid "Configuring PCMCIA cards..." msgstr "" #: ../install_steps_interactive.pm_.c:789 msgid "PCMCIA" msgstr "" #: ../install_steps_interactive.pm_.c:796 #, c-format msgid "Skip %s PCI probing" msgstr "" #: ../install_steps_interactive.pm_.c:800 #, c-format msgid "Found %s %s interfaces" msgstr "" #: ../install_steps_interactive.pm_.c:801 msgid "Do you have another one?" msgstr "" #: ../install_steps_interactive.pm_.c:802 #, c-format msgid "Do you have an %s interface?" msgstr "" #: ../install_steps_interactive.pm_.c:804 ../interactive.pm_.c:52 #: ../my_gtk.pm_.c:347 msgid "No" msgstr "" #: ../install_steps_interactive.pm_.c:804 ../interactive.pm_.c:52 #: ../my_gtk.pm_.c:347 msgid "Yes" msgstr "" #: ../install_steps_interactive.pm_.c:805 msgid "See hardware info" msgstr "" #: ../install_steps_stdio.pm_.c:21 #, c-format msgid "Entering step `%s'\n" msgstr "" #: ../interactive.pm_.c:57 ../my_gtk.pm_.c:195 ../my_gtk.pm_.c:348 msgid "Cancel" msgstr "" #: ../interactive.pm_.c:149 msgid "Please wait" msgstr "" #: ../interactive_stdio.pm_.c:34 #, c-format msgid "Ambiguity (%s), be more precise\n" msgstr "" #: ../interactive_stdio.pm_.c:35 ../interactive_stdio.pm_.c:50 #: ../interactive_stdio.pm_.c:69 msgid "Bad choice, try again\n" msgstr "" #: ../interactive_stdio.pm_.c:38 #, c-format msgid " ? (default %s) " msgstr "" #: ../interactive_stdio.pm_.c:51 #, c-format msgid "Your choice? (default %s) " msgstr "" #: ../interactive_stdio.pm_.c:70 #, c-format msgid "Your choice? (default %s enter `none' for none) " msgstr "" #: ../keyboard.pm_.c:32 msgid "Belgian" msgstr "" #: ../keyboard.pm_.c:33 msgid "Bulgarian" msgstr "" #: ../keyboard.pm_.c:35 msgid "Czech" msgstr "" #: ../keyboard.pm_.c:36 msgid "German" msgstr "" #: ../keyboard.pm_.c:37 msgid "Danish" msgstr "" #: ../keyboard.pm_.c:38 msgid "Dvorak" msgstr "" #: ../keyboard.pm_.c:41 msgid "Spanish" msgstr "" #: ../keyboard.pm_.c:42 msgid "Finnish" msgstr "" #: ../keyboard.pm_.c:43 msgid "French" msgstr "" #: ../keyboard.pm_.c:48 msgid "Greek" msgstr "" #: ../keyboard.pm_.c:50 msgid "Hungarian" msgstr "" #: ../keyboard.pm_.c:52 msgid "Israeli" msgstr "" #: ../keyboard.pm_.c:53 msgid "Icelandic" msgstr "" #: ../keyboard.pm_.c:55 msgid "Italian" msgstr "" #: ../keyboard.pm_.c:56 msgid "Latin American" msgstr "" #: ../keyboard.pm_.c:58 msgid "Dutch" msgstr "" #: ../keyboard.pm_.c:62 msgid "Norwegian" msgstr "" #: ../keyboard.pm_.c:64 msgid "Polish" msgstr "" #: ../keyboard.pm_.c:65 msgid "Portuguese" msgstr "" #: ../keyboard.pm_.c:68 msgid "Russian" msgstr "" #: ../keyboard.pm_.c:69 msgid "Swedish" msgstr "" #: ../keyboard.pm_.c:71 msgid "Swiss (French layout)" msgstr "" #: ../keyboard.pm_.c:72 msgid "Swiss (German layout)" msgstr "" #: ../keyboard.pm_.c:77 msgid "Turkish (traditional \"F\" model)" msgstr "" #: ../keyboard.pm_.c:78 msgid "Turkish (modern \"Q\" model)" msgstr "" #: ../keyboard.pm_.c:80 msgid "UK keyboard" msgstr "" #: ../keyboard.pm_.c:82 msgid "US keyboard" msgstr "" #: ../lilo.pm_.c:111 msgid "" "Welcome to LILO the operating system chooser!\n" "To list the possible choices, press \n" msgstr "" #: ../mouse.pm_.c:15 msgid "No Mouse" msgstr "" #: ../mouse.pm_.c:16 msgid "Microsoft Rev 2.1A or higher (serial)" msgstr "" #: ../mouse.pm_.c:17 msgid "Logitech CC Series (serial)" msgstr "" #: ../mouse.pm_.c:18 msgid "Logitech MouseMan+/FirstMouse+ (serial)" msgstr "" #: ../mouse.pm_.c:19 msgid "ASCII MieMouse (serial)" msgstr "" #: ../mouse.pm_.c:20 msgid "Genius NetMouse (serial)" msgstr "" #: ../mouse.pm_.c:21 msgid "Microsoft IntelliMouse (serial)" msgstr "" #: ../mouse.pm_.c:22 msgid "MM Series (serial)" msgstr "" #: ../mouse.pm_.c:23 msgid "MM HitTablet (serial)" msgstr "" #: ../mouse.pm_.c:24 msgid "Logitech Mouse (serial, old C7 type)" msgstr "" #: ../mouse.pm_.c:25 msgid "Logitech MouseMan/FirstMouse (serial)" msgstr "" #: ../mouse.pm_.c:26 msgid "Generic Mouse (serial)" msgstr "" #: ../mouse.pm_.c:27 msgid "Microsoft compatible (serial)" msgstr "" #: ../mouse.pm_.c:28 msgid "Generic 3 Button Mouse (serial)" msgstr "" #: ../mouse.pm_.c:29 msgid "Mouse Systems (serial)" msgstr "" #: ../mouse.pm_.c:30 msgid "Generic Mouse (PS/2)" msgstr "" #: ../mouse.pm_.c:31 msgid "Logitech MouseMan/FirstMouse (ps/2)" msgstr "" #: ../mouse.pm_.c:32 msgid "Generic 3 Button Mouse (PS/2)" msgstr "" #: ../mouse.pm_.c:33 msgid "ALPS GlidePoint (PS/2)" msgstr "" #: ../mouse.pm_.c:34 msgid "Logitech MouseMan+/FirstMouse+ (PS/2)" msgstr "" #: ../mouse.pm_.c:35 msgid "Kensington Thinking Mouse (PS/2)" msgstr "" #: ../mouse.pm_.c:36 msgid "ASCII MieMouse (PS/2)" msgstr "" #: ../mouse.pm_.c:37 msgid "Genius NetMouse (PS/2)" msgstr "" #: ../mouse.pm_.c:38 msgid "Genius NetMouse Pro (PS/2)" msgstr "" #: ../mouse.pm_.c:39 msgid "Genius NetScroll (PS/2)" msgstr "" #: ../mouse.pm_.c:40 msgid "Microsoft IntelliMouse (PS/2)" msgstr "" #: ../mouse.pm_.c:41 msgid "ATI Bus Mouse" msgstr "" #: ../mouse.pm_.c:42 msgid "Microsoft Bus Mouse" msgstr "" #: ../mouse.pm_.c:43 msgid "Logitech Bus Mouse" msgstr "" #: ../partition_table.pm_.c:373 msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions" msgstr "" #: ../partition_table.pm_.c:459 #, c-format msgid "Error reading file %s" msgstr "" #: ../partition_table.pm_.c:466 #, c-format msgid "Restoring from file %s failed: %s" msgstr "" #: ../partition_table.pm_.c:468 msgid "Bad backup file" msgstr "" #: ../partition_table.pm_.c:488 #, c-format msgid "Error writing to file %s" msgstr "" #: ../printer.pm_.c:244 msgid "Local printer" msgstr "" #: ../printer.pm_.c:245 msgid "Remote lpd" msgstr "" #: ../printer.pm_.c:246 msgid "SMB/Windows 95/NT" msgstr "" #: ../printer.pm_.c:247 msgid "NetWare" msgstr ""