package pkgs; # $Id$

use diagnostics;
use strict;
use vars qw(*LOG %preferred $limitMinTrans %compssListDesc);

use MDK::Common::System;
use common;
use install_any;
use run_program;
use detect_devices;
use log;
use fs;
use loopback;
use c;



my @preferred = qw(perl-GTK postfix gcc-cpp proftpd ghostscript-X vim-minimal kernel db1 db2 ispell-en Bastille-Curses-module nautilus libxpm4);
@preferred{@preferred} = ();

#- lower bound on the left ( aka 90 means [90-100[ )
%compssListDesc = (
   5 => __("must have"),
   4 => __("important"),
   3 => __("very nice"),
   2 => __("nice"),
   1 => __("maybe"),
);

#- constant for small transaction.
$limitMinTrans = 8;

#- constant for package accessor (via table).
my $FILE                 = 0;
my $FLAGS                = 1;
my $SIZE_DEPS            = 2;
my $MEDIUM               = 3;
my $PROVIDES             = 4;
my $VALUES               = 5;
my $HEADER               = 6;
my $INSTALLED_CUMUL_SIZE = 7;
my $EPOCH                = 8;

#- constant for packing flags, see below.
my $PKGS_SELECTED  = 0x00ffffff;
my $PKGS_FORCE     = 0x01000000;
my $PKGS_INSTALLED = 0x02000000;
my $PKGS_BASE      = 0x04000000;
my $PKGS_UPGRADE   = 0x20000000;

#- package to ignore, typically in Application CD.
my %ignoreBadPkg = (
		    'civctp-demo'   => 1,
		    'eus-demo'      => 1,
		    'myth2-demo'    => 1,
		    'heretic2-demo' => 1,
		    'heroes3-demo'  => 1,
		    'rt2-demo'      => 1,
		   );

#- basic methods for extracting informations about packages.
#- to save memory, (name, version, release) are no more stored, they
#- are directly generated from (file).
#- all flags are grouped together into (flags), these includes the
#- following flags : selected, force, installed, base, skip.
#- size and deps are grouped to save memory too and make a much
#- simpler and faster depslist reader, this gets (sizeDeps).
sub packageHeaderFile   { $_[0] ? $_[0]->[$FILE]
			    : die "invalid package from\n" . backtrace() }
sub packageName         { $_[0] && $_[0]->[$FILE] =~ /^([^:\s]*)-[^:\-\s]+-[^:\-\s]+\.[^:\.\-\s]*(?::.*)?/ ? $1
			    : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
sub packageVersion      { $_[0] && $_[0]->[$FILE] =~ /^[^:\s]*-([^:\-\s]+)-[^:\-\s]+\.[^:\.\-\s]*(?::.*)?/ ? $1
			    : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
sub packageRelease      { $_[0] && $_[0]->[$FILE] =~ /^[^:\s]*-[^:\-\s]+-([^:\-\s]+)\.[^:\.\-\s]*(?::.*)?/ ? $1
			    : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
sub packageArch         { $_[0] && $_[0]->[$FILE] =~ /^[^:\s]*-[^:\-\s]+-[^:\-\s]+\.([^:\.\-\s]*)(?::.*)?/ ? $1
			    : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
sub packageFile         { $_[0] && $_[0]->[$FILE] =~ /^([^:\s]*-[^:\-\s]+-[^:\-\s]+\.[^:\.\-\s]*)(?::(.*))?/ ? ($2 || $1) . ".rpm"
			    : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
sub packageEpoch        { $_[0] && $_[0]->[$EPOCH] || 0 }

sub packageSize   { to_int($_[0] && ($_[0]->[$SIZE_DEPS] - ($_[0]->[$INSTALLED_CUMUL_SIZE] || 0))) }
sub packageDepsId { split ' ', ($_[0] && ($_[0]->[$SIZE_DEPS] =~ /^\d*\s*(.*)/)[0]) }

sub packageFlagSelected  { $_[0] && $_[0]->[$FLAGS] & $PKGS_SELECTED }
sub packageFlagForce     { $_[0] && $_[0]->[$FLAGS] & $PKGS_FORCE }
sub packageFlagInstalled { $_[0] && $_[0]->[$FLAGS] & $PKGS_INSTALLED }
sub packageFlagBase      { $_[0] && $_[0]->[$FLAGS] & $PKGS_BASE }
sub packageFlagUpgrade   { $_[0] && $_[0]->[$FLAGS] & $PKGS_UPGRADE }

sub packageSetFlagSelected  { $_[0]->[$FLAGS] &= ~$PKGS_SELECTED; $_[0]->[$FLAGS] |= $_[1] & $PKGS_SELECTED; }

sub packageSetFlagForce     { $_[0] or die "invalid package from\n" . backtrace();
			      $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_FORCE)     : ($_[0]->[$FLAGS] &= ~$PKGS_FORCE); }
sub packageSetFlagInstalled { $_[0] or die "invalid package from\n" . backtrace();
			      $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_INSTALLED) : ($_[0]->[$FLAGS] &= ~$PKGS_INSTALLED); }
sub packageSetFlagBase      { $_[0] or die "invalid package from\n" . backtrace();
			      $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_BASE)      : ($_[0]->[$FLAGS] &= ~$PKGS_BASE); }
sub packageSetFlagUpgrade   { $_[0] or die "invalid package from\n" . backtrace();
			      $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_UPGRADE)   : ($_[0]->[$FLAGS] &= ~$PKGS_UPGRADE); }

sub packageMedium { my ($packages, $p) = @_; $p or die "invalid package from\n" . backtrace();
		    $packages->{mediums}{$p->[$MEDIUM]} }

sub packageProvides { $_[1] or die "invalid package from\n" . backtrace();
		      map { $_[0]->{depslist}[$_] || die "unkown package id $_" } unpack "s*", $_[1]->[$PROVIDES] }

sub packageRate          { substr($_[0] && $_[0]->[$VALUES], 0, 1) }
sub packageRateRFlags    { my ($rate, @flags) = split "\t", $_[0] && $_[0]->[$VALUES]; ($rate, @flags) }
sub packageSetRateRFlags { my ($pkg, $rate, @flags) = @_; $pkg or die "invalid package from\n" . backtrace();
			   $pkg->[$VALUES] = join("\t", $rate, @flags) }

sub packageHeader     { $_[0] && $_[0]->[$HEADER] }
sub packageFreeHeader { $_[0] && c::headerFree(delete $_[0]->[$HEADER]) }

sub packageSelectedOrInstalled { packageFlagSelected($_[0]) || packageFlagInstalled($_[0]) }

sub packageId {
    my ($packages, $pkg) = @_;
    my $i = 0;
    foreach (@{$packages->{depslist}}) { return $i if $pkg == $packages->{depslist}[$i]; $i++ }
    return;
}

sub cleanHeaders {
    my ($prefix) = @_;
    rm_rf("$prefix/tmp/headers") if -e "$prefix/tmp/headers";
}

#- get all headers from an hdlist file.
sub extractHeaders {
    my ($prefix, $pkgs, $media) = @_;
    my %medium2pkgs;

    cleanHeaders($prefix);

    foreach (@$pkgs) {
	push @{$medium2pkgs{$_->[$MEDIUM]} ||= []}, $_;
    }

    foreach (values %medium2pkgs) {
	my $medium = $media->{$_->[0][$MEDIUM]}; #- the first one is a valid package pointing to right medium to use.

	eval {
	    require packdrake;
	    my $packer = new packdrake("/tmp/$medium->{hdlist}", quiet => 1);
	    $packer->extract_archive("$prefix/tmp/headers", map { packageHeaderFile($_) } @$_);
	};
    }

    foreach (@$pkgs) {
	my $f = "$prefix/tmp/headers/". packageHeaderFile($_);
	local *H;
	open H, $f or log::l("unable to open header file $f: $!"), next;
	$_->[$HEADER] = c::headerRead(fileno H, 1) or log::l("unable to read header of package ". packageHeaderFile($_));
    }
    @$pkgs = grep { $_->[$HEADER] } @$pkgs;
}

#- size and correction size functions for packages.
my $B = 1.20873;
my $C = 4.98663; #- doesn't take hdlist's into account as getAvailableSpace will do it.
sub correctSize { $B * $_[0] + $C }
sub invCorrectSize { ($_[0] - $C) / $B }

sub selectedSize {
    my ($packages) = @_;
    my $size = 0;
    foreach (values %{$packages->{names}}) {
	packageFlagSelected($_) && !packageFlagInstalled($_) and $size += packageSize($_);
    }
    $size;
}
sub correctedSelectedSize { correctSize(selectedSize($_[0]) / sqr(1024)) }

sub size2time {
    my ($x, $max) = @_;
    my $A = 7e-07;
    my $limit = min($max * 3 / 4, 9e8);
    if ($x < $limit) {
	$A * $x;
    } else { 
	$x -= $limit;
	my $B = 6e-16;
	my $C = 15e-07;
	$B * $x ** 2 + $C * $x + $A * $limit;
    }
}


#- searching and grouping methods.
#- package is a reference to list that contains
#- a hash to search by name and
#- a list to search by id.
sub packageByName {
    my ($packages, $name) = @_;
    $packages->{names}{$name} or log::l("unknown package `$name'") && undef;
}
sub packageById {
    my ($packages, $id) = @_;
    my $l = $packages->{depslist}[$id]; #- do not log as id unsupported are still in depslist.
    $l && @$l && $l;
}
sub packagesOfMedium {
    my ($packages, $medium) = @_;
    grep { $_ && $_->[$MEDIUM] == $medium } @{$packages->{depslist}};
}
sub packagesToInstall {
    my ($packages) = @_;
    grep { packageFlagSelected($_) && !packageFlagInstalled($_) &&
	     packageMedium($packages, $_)->{selected} } values %{$packages->{names}};
}

sub allMediums {
    my ($packages) = @_;
    sort { $a <=> $b } keys %{$packages->{mediums}};
}
sub mediumDescr {
    my ($packages, $medium) = @_;
    $packages->{mediums}{$medium}{descr};
}

#- selection, unselection of package.
sub selectPackage { #($$;$$$)
    my ($packages, $pkg, $base, $otherOnly, $check_recursion) = @_;

    #- check for medium selection, if the medium has not been
    #- selected, the package cannot be selected.
    #- check if the same or better version is installed,
    #- do not select in such case.
    $pkg && packageMedium($packages, $pkg)->{selected} && !packageFlagInstalled($pkg) or return;

    #- avoid infinite recursion (mainly against badly generated depslist.ordered).
    $check_recursion ||= {}; exists $check_recursion->{$pkg->[$FILE]} and return; $check_recursion->{$pkg->[$FILE]} = undef;

    #- make sure base package are set even if already selected.
    $base and packageSetFlagBase($pkg, 1);

    #- select package and dependancies, otherOnly may be a reference
    #- to a hash to indicate package that will strictly be selected
    #- when value is true, may be selected when value is false (this
    #- is only used for unselection, not selection)
    unless (packageFlagSelected($pkg)) {
	foreach (packageDepsId($pkg)) {
	    if (/\|/) {
		#- choice deps should be reselected recursively as no
		#- closure on them is computed, this code is exactly the
		#- same as pixel's one.
		my $preferred;	    
		foreach (split '\|') {
		    my $dep = packageById($packages, $_) or next;
		    $preferred ||= $dep;
		    packageFlagSelected($dep) and $preferred = $dep, last;
		    packageName($dep) =~ /kernel-\d/ and $preferred = $dep; #- hard coded preference to simple kernel
		    exists $preferred{packageName($dep)} and $preferred = $dep;
		}
		$preferred or die "unable to find a package for choice";
		packageFlagSelected($preferred) or log::l("selecting default package as $preferred->[$FILE]");
		selectPackage($packages, $preferred, $base, $otherOnly, $check_recursion);
	    } else {
		#- deps have been closed except for choices, so no need to
		#- recursively apply selection, expand base on it.
		my $dep = packageById($packages, $_);
		$base and packageSetFlagBase($dep, 1);
		$otherOnly and !packageFlagSelected($dep) and $otherOnly->{packageName($dep)} = 1;
		$otherOnly or packageSetFlagSelected($dep, 1+packageFlagSelected($dep));
	    }
	}
    }
    $otherOnly and !packageFlagSelected($pkg) and $otherOnly->{packageName($pkg)} = 1;
    $otherOnly or packageSetFlagSelected($pkg, 1+packageFlagSelected($pkg));
    1;
}
sub unselectPackage($$;$) {
    my ($packages, $pkg, $otherOnly) = @_;

    #- base package are not unselectable,
    #- and already unselected package are no more unselectable.
    packageFlagBase($pkg) and return;
    packageFlagSelected($pkg) or return;

    #- dependancies may be used to propose package that may be not
    #- usefull for the user, since their counter is just one and
    #- they are not used any more by other packages.
    #- provides are closed and are taken into account to get possible
    #- unselection of package (value false on otherOnly) or strict
    #- unselection (value true on otherOnly).
    foreach my $provided ($pkg, packageProvides($packages, $pkg)) {
	packageFlagBase($provided) and die "a provided package cannot be a base package";
	if (packageFlagSelected($provided)) {
	    my $unselect_alone = 1;
	    foreach (packageDepsId($provided)) {
		$unselect_alone = 0;
		if (/\|/) {
		    #- this package use a choice of other package, so we have to check
		    #- if our package is not included in the choice, if this is the
		    #- case, if must be checked one of the other package are selected.
		    foreach (split '\|') {
			my $dep = packageById($packages, $_) or next;
			$dep == $pkg and $unselect_alone |= 1 and next;
			packageFlagBase($dep) || packageFlagSelected($dep) and $unselect_alone |= 2;
		    }
		} else {
		    packageById($packages, $_) == $pkg and $unselect_alone = 1;
		}
		$unselect_alone == 1 and last;
	    }
	    #- if package has been found and nothing more selected,
	    #- deselect the provided, or we can ignore it safely.
	    $provided == $pkg || $unselect_alone == 1 or next;
	    $otherOnly or packageSetFlagSelected($provided, 0);
	    $otherOnly and $otherOnly->{packageName($provided)} = 1;
	}
	foreach (map { split '\|' } packageDepsId($provided)) {
	    my $dep = packageById($packages, $_) or next;
	    packageFlagBase($dep) and next;
	    packageFlagSelected($dep) or next;
	    for (packageFlagSelected($dep)) {
		$_ == 1 and do { $otherOnly and $otherOnly->{packageName($dep)} ||= 0; };
		$_ >  1 and do { $otherOnly or packageSetFlagSelected($dep, $_-1); };
		last;
	    }
	}
    }
    1;
}
sub togglePackageSelection($$;$) {
    my ($packages, $pkg, $otherOnly) = @_;
    packageFlagSelected($pkg) ? unselectPackage($packages, $pkg, $otherOnly) : selectPackage($packages, $pkg, 0, $otherOnly);
}
sub setPackageSelection($$$) {
    my ($packages, $pkg, $value) = @_;
    $value ? selectPackage($packages, $pkg) : unselectPackage($packages, $pkg);
}

sub unselectAllPackages($) {
    my ($packages) = @_;
    foreach (values %{$packages->{names}}) {
	unless (packageFlagBase($_) || packageFlagUpgrade($_)) {
	    packageSetFlagSelected($_, 0);
	}
    }
}
sub unselectAllPackagesIncludingUpgradable($) {
    my ($packages, $removeUpgradeFlag) = @_;
    foreach (values %{$packages->{names}}) {
	unless (packageFlagBase($_)) {
	    packageSetFlagSelected($_, 0);
	    packageSetFlagUpgrade($_, 0);
	}
    }
}

sub psUpdateHdlistsDeps {
    my ($prefix, $method, $packages) = @_;
    my ($good_hdlists_deps, $mediums) = (0, 0);

    #- check if current configuration is still up-to-date and do not need to be updated.
    foreach (values %{$packages->{mediums}}) {
	my $hdlistf = "$prefix/var/lib/urpmi/hdlist.$_->{fakemedium}.cz" . ($_->{hdlist} =~ /\.cz2/ && "2");
	my $synthesisf = "$prefix/var/lib/urpmi/synthesis.hdlist.$_->{fakemedium}.cz" . ($_->{hdlist} =~ /\.cz2/ && "2");
	-s $hdlistf == $_->{hdlist_size} && -s $synthesisf == $_->{synthesis_hdlist_size} and ++$good_hdlists_deps;
	++$mediums;
    }
    $good_hdlists_deps > 0 && $good_hdlists_deps == $mediums and return; #- nothing to do.

    #- at this point, this means partition has problably be reformatted and hdlists should be retrieved.
    install_any::useMedium($install_any::boot_medium);

    my $listf = install_any::getFile('Mandrake/base/hdlists') or die "no hdlists found";

    #- WARNING: this function should be kept in sync with functions
    #- psUsingHdlists and psUsingHdlist.
    #- it purpose it to update hdlist files on system to install.

    #- parse hdlist.list file.
    my $medium = 1;
    foreach (<$listf>) {
	chomp;
	s/\s*#.*$//;
	/^\s*$/ and next;
	m/^\s*(hdlist\S*\.cz2?)\s+(\S+)\s*(.*)$/ or die "invalid hdlist description \"$_\" in hdlists file";
	my ($hdlist, $rpmsdir, $descr) = ($1, $2, $3);

	#- copy hdlist file directly to $prefix/var/lib/urpmi, this will be used
	#- for getting header of package during installation or after by urpmi.
	my $fakemedium = "$descr ($method$medium)";
	my $newf = "$prefix/var/lib/urpmi/hdlist.$fakemedium.cz" . ($hdlist =~ /\.cz2/ && "2");
	-e $newf and do { unlink $newf or die "cannot remove $newf: $!"; };
	install_any::getAndSaveFile("Mandrake/base/$hdlist", $newf) or die "no $hdlist found";
	symlinkf $newf, "/tmp/$hdlist";
	install_any::getAndSaveFile("Mandrake/base/synthesis.$hdlist",
				    "$prefix/var/lib/urpmi/synthesis.hdlist.$fakemedium.cz" . ($hdlist =~ /\.cz2/ && "2"));
	++$medium;
    }

    #- this is necessary for urpmi.
    install_any::getAndSaveFile("Mandrake/base/$_", "$prefix/var/lib/urpmi/$_")
      foreach qw(depslist.ordered provides rpmsrate);
}

sub psUsingHdlists {
    my ($prefix, $method) = @_;
    my $listf = install_any::getFile('Mandrake/base/hdlists') or die "no hdlists found";
    my %packages = ( names => {}, count => 0, depslist => [], mediums => {});

    #- parse hdlists file.
    my $medium = 1;
    foreach (<$listf>) {
	chomp;
	s/\s*#.*$//;
	/^\s*$/ and next;
	m/^\s*(hdlist\S*\.cz2?)\s+(\S+)\s*(.*)$/ or die "invalid hdlist description \"$_\" in hdlists file";

	#- make sure the first medium is always selected!
	#- by default select all image.
	psUsingHdlist($prefix, $method, \%packages, $1, $medium, $2, $3, 1);

	++$medium;
    }

    log::l("psUsingHdlists read " . scalar keys(%{$packages{names}}) .
	   " headers on " . scalar keys(%{$packages{mediums}}) . " hdlists");

    \%packages;
}

sub psUsingHdlist {
    my ($prefix, $method, $packages, $hdlist, $medium, $rpmsdir, $descr, $selected, $fhdlist) = @_;
    my $fakemedium = "$descr ($method$medium)";
    my ($relocated, $ignored) = (0, 0);
    log::l("trying to read $hdlist for medium $medium");

    #- if the medium already exist, use it.
    $packages->{mediums}{$medium} and return $packages->{mediums}{$medium};

    my $m = $packages->{mediums}{$medium} = { hdlist     => $hdlist,
					      method     => $method,
					      medium     => $medium,
					      rpmsdir    => $rpmsdir, #- where is RPMS directory.
					      descr      => $descr,
					      fakemedium => $fakemedium,
					      min        => $packages->{count},
					      max        => -1, #- will be updated after reading current hdlist.
					      selected   => $selected, #- default value is only CD1, it is really the minimal.
					    };

    #- copy hdlist file directly to $prefix/var/lib/urpmi, this will be used
    #- for getting header of package during installation or after by urpmi.
    my $newf = "$prefix/var/lib/urpmi/hdlist.$fakemedium.cz" . ($hdlist =~ /\.cz2/ && "2");
    -e $newf and do { unlink $newf or die "cannot remove $newf: $!"; };
    install_any::getAndSaveFile($fhdlist || "Mandrake/base/$hdlist", $newf) or die "no $hdlist found";
    $m->{hdlist_size} = -s $newf; #- keep track of size for post-check.
    symlinkf $newf, "/tmp/$hdlist";

    #- copy existing synthesis file too.
    my $newsf = "$prefix/var/lib/urpmi/synthesis.hdlist.$fakemedium.cz" . ($hdlist =~ /\.cz2/ && "2");
    install_any::getAndSaveFile("Mandrake/base/synthesis.$hdlist", $newsf);
    $m->{synthesis_hdlist_size} = -s $newsf; #- keep track of size for post-check.
    -s $newsf > 0 or unlink $newsf;

    #- avoid using more than one medium if Cd is not ejectable.
    #- but keep all medium here so that urpmi has the whole set.
    $method eq 'cdrom' && $medium > 1 && !common::usingRamdisk() and return;

    #- extract filename from archive, this take advantage of verifying
    #- the archive too.
    eval {
	require packdrake;
	my $packer = new packdrake($newf, quiet => 1);
	foreach (@{$packer->{files}}) {
	    $packer->{data}{$_}[0] eq 'f' or next;
	    my $pkg = [ (undef) x 8 ]; $pkg->[$FILE] = $_; $pkg->[$MEDIUM] = $medium;
	    my $specific_arch = packageArch($pkg);
	    if (!$specific_arch || MDK::Common::System::compat_arch($specific_arch)) {
		my $old_pkg = $packages->{names}{packageName($pkg)};
		if ($old_pkg) {
		    my $epo_compare = 0; #- NO EPOCH AVAILABLE TODO packageEpoch($pkg) <=> packageEpoch($old_pkg);
		    my $ver_compare = $epo_compare == 0 && versionCompare(packageVersion($pkg), packageVersion($old_pkg));
		    my $rel_compare = $ver_compare == 0 && versionCompare(packageRelease($pkg), packageRelease($old_pkg));
		    if ($epo_compare > 0  || $ver_compare > 0 || $rel_compare > 0 ||
			$epo_compare == 0 && $ver_compare == 0 && $rel_compare == 0 &&
			MDK::Common::System::better_arch($specific_arch, packageArch($old_pkg))) {
			log::l("replacing old package $old_pkg->[$FILE] with package $pkg->[$FILE]");
			foreach ($FILE, $MEDIUM) { #- TODO KEEP OLD PARAMETER
			    $old_pkg->[$_] = $pkg->[$_];
			}
			packageFreeHeader($old_pkg);
			if (packageFlagInstalled($old_pkg)) {
			    packageSetFlagInstalled($old_pkg, 0);
			    selectPackage($packages, $old_pkg);
			}
			++$relocated;
		    } else {
			log::l("no need to replace previous package $old_pkg->[$FILE] with newer package $pkg->[$FILE]");
			++$ignored;
		    }
		} else {
		    $packages->{names}{packageName($pkg)} = $pkg;
		    ++$packages->{count}; #- take care of this one, so that desplist will be clean with index of package.
		}
	    } else {
	        log::l("ignoring package $_ with incompatible arch: $specific_arch");
		++$ignored;
	    }
	}
    };

    #- update maximal index.
    $m->{max} = $packages->{count} - 1;
    $m->{max} >= $m->{min} || $relocated > 0 || $ignored > 0 or die "nothing found while parsing $newf";
    $relocated > 0 and log::l("relocated $relocated headers in $hdlist");
    $ignored > 0 and log::l("ignored $ignored headers in $hdlist");
    log::l("read " . ($m->{max} - $m->{min} + 1) . " new headers in $hdlist");
    $m;
}

sub getOtherDeps($$) {
    my ($packages, $f) = @_;

    #- this version of getDeps is customized for handling errors more easily and
    #- convert reference by name to deps id including closure computation.
    local $_;
    while (<$f>) {
	my ($name, $version, $release, $size, $deps) = /^(\S*)-([^-\s]+)-([^-\s]+)\s+(\d+)\s+(.*)/;
	my $pkg = $packages->{names}{$name};

	$pkg or log::l("ignoring package $name-$version-$release in depslist is not in hdlist"), next;
	$version eq packageVersion($pkg) and $release eq packageRelease($pkg)
	  or log::l("warning package $name-$version-$release in depslist mismatch version or release in hdlist ($version ne ",
		    packageVersion($pkg), " or $release ne ", packageRelease($pkg), ")"), next;

	my $index = scalar @{$packages->{depslist}};
	$index >= packageMedium($packages, $pkg)->{min} && $index <= packageMedium($packages, $pkg)->{max}
	  or log::l("ignoring package $name-$version-$release in depslist outside of hdlist indexation");

	#- here we have to translate referenced deps by name to id.
	#- this include a closure on deps too.
	my %closuredeps;
	@closuredeps{map { packageId($packages, $_), packageDepsId($_) }
		       grep { $_ }
			 map { packageByName($packages, $_) or do { log::l("unknown package $_ in depslist for closure"); undef } }
			   split /\s+/, $deps} = ();

	$pkg->[$SIZE_DEPS] = join " ", $size, keys %closuredeps;

	push @{$packages->{depslist}}, $pkg;
    }

    #- check for same number of package in depslist and hdlists, avoid being to hard.
    scalar(keys %{$packages->{names}}) == scalar(@{$packages->{depslist}})
      or log::l("other depslist has not same package as hdlist file");
}

sub getDeps {
    my ($prefix, $packages) = @_;

    #- this is necessary for urpmi.
    install_any::getAndSaveFile('Mandrake/base/depslist.ordered', "$prefix/var/lib/urpmi/depslist.ordered");
    install_any::getAndSaveFile('Mandrake/base/provides', "$prefix/var/lib/urpmi/provides");

    #- beware of heavily mismatching depslist.ordered file against hdlist files.
    my $mismatch = 0;

    #- count the number of packages in deplist that are also in hdlist
    my $nb_deplist = 0;

    #- update dependencies list, provides attributes are updated later
    #- cross reference to be resolved on id (think of loop requires)
    #- provides should be updated after base flag has been set to save
    #- memory.
    local *F; open F, "$prefix/var/lib/urpmi/depslist.ordered" or die "can't find dependancies list";
    local $_;
    while (<F>) {
	my ($name, $version, $release, $arch, $epoch, $sizeDeps) =
	  /^([^:\s]*)-([^:\-\s]+)-([^:\-\s]+)\.([^:\.\-\s]*)(?::(\d+)\S*)?\s+(.*)/;
	my $pkg = $packages->{names}{$name};

	#- these verification are necessary in case of error, but are no more fatal as
	#- in case of only one medium taken into account during install, there should be
	#- silent warning for package which are unknown at this point.
	$pkg or
	  log::l("ignoring $name-$version-$release.$arch in depslist is not in hdlist");
	$pkg && $version ne packageVersion($pkg) and
	  log::l("ignoring $name-$version-$release.$arch in depslist mismatch version in hdlist"), $pkg = undef;
	$pkg && $release ne packageRelease($pkg) and
	  log::l("ignoring $name-$version-$release.$arch in depslist mismatch release in hdlist"), $pkg = undef;
	$pkg && $arch ne packageArch($pkg) and
	  log::l("ignoring $name-$version-$release.$arch in depslist mismatch arch in hdlist"), $pkg = undef;

	if ($pkg) {
	    $nb_deplist++;
	    $epoch && $epoch > 0 and $pkg->[$EPOCH] = $epoch; #- only 5% of the distribution use epoch (serial).
	    $pkg->[$SIZE_DEPS] = $sizeDeps;

	    #- check position of package in depslist according to precomputed
	    #- limit by hdlist, very strict :-)
	    #- above warning have chance to raise an exception here, but may help
	    #- for debugging.
	    my $i = scalar @{$packages->{depslist}};
	    $i >= packageMedium($packages, $pkg)->{min} && $i <= packageMedium($packages, $pkg)->{max} or
	      log::l("inconsistency in position for $name-$version-$release.$arch in depslist and hdlist"), $mismatch = 1;
	}

	#- package are already sorted in depslist to enable small transaction and multiple medium.
	push @{$packages->{depslist}}, $pkg;
    }

    #- check for mismatching package, it should break with above die unless depslist has too many errors!
    $mismatch and die "depslist.ordered mismatch against hdlist files";

    #- check for same number of package in depslist and hdlists.
    my $nb_hdlist = keys %{$packages->{names}};
    $nb_hdlist == $nb_deplist or die "depslist.ordered has not same package as hdlist files ($nb_deplist != $nb_hdlist)";
}

sub getProvides($) {
    my ($packages) = @_;

    #- update provides according to dependencies, here are stored
    #- reference to package directly and choice are included, this
    #- assume only 1 of the choice is selected, else on unselection
    #- the provided package will be deleted where other package still
    #- need it.
    #- base package are not updated because they cannot be unselected,
    #- this save certainly a lot of memory since most of them may be
    #- needed by a large number of package.
    #- now using a packed of signed short, this means no more than 32768
    #- packages can be managed by DrakX (currently about 2000).
    my $i = 0;
    foreach my $pkg (@{$packages->{depslist}}) {
	$pkg or next;
	unless (packageFlagBase($pkg)) {
	    foreach (map { split '\|' } grep { !/^NOTFOUND_/ } packageDepsId($pkg)) {
		my $provided = packageById($packages, $_) or next;
		packageFlagBase($provided) or $provided->[$PROVIDES] = pack "s*", (unpack "s*", $provided->[$PROVIDES]), $i;
	    }
	}
	++$i;
    }
}

sub read_rpmsrate {
    my ($packages, $f) = @_;
    my $line_nb = 0;
    my $fatal_error;
    my (@l);
    while (<$f>) {
	$line_nb++;
	/\t/ and die "tabulations not allowed at line $line_nb\n";
	s/#.*//; # comments

	my ($indent, $data) = /(\s*)(.*)/;
	next if !$data; # skip empty lines

	@l = grep { $_->[0] < length $indent } @l;

	my @m = @l ? @{$l[$#l][1]} : ();
	my ($t, $flag, @l2);
	while ($data =~ 
	       /^((
                   [1-5]
                   |
                   (?:            (?: !\s*)? [0-9A-Z_]+(?:".*?")?)
                   (?: \s*\|\|\s* (?: !\s*)? [0-9A-Z_]+(?:".*?")?)*
                  )
                  (?:\s+|$)
                 )(.*)/x) { #@")) {
	    ($t, $flag, $data) = ($1,$2,$3);
	    while ($flag =~ s,^\s*(("[^"]*"|[^"\s]*)*)\s+,$1,) {}
	    my $ok = 0;
	    $flag = join('||', grep { 
		if (my ($inv, $p) = /^(!)?HW"(.*)"/) {
		    ($inv xor detect_devices::matching_desc($p)) and $ok = 1;
		    0;
		} else {
		    1;
		}
	    } split '\|\|', $flag);
	    push @m, $ok ? 'TRUE' : $flag || 'FALSE';
	    push @l2, [ length $indent, [ @m ] ];
	    $indent .= $t;
	}
	if ($data) {
	    # has packages on same line
	    my ($rate) = grep { /^\d$/ } @m or die sprintf qq(missing rate for "%s" at line %d (flags are %s)\n), $data, $line_nb, join('&&', @m);
	    foreach (split ' ', $data) {
		if ($packages) {
		    my $p = packageByName($packages, $_) or next;
		    my @m2 = 
		      map { if_($_ && packageName($_) =~ /locales-(.*)/, qq(LOCALES"$1")) }
		      map { packageById($packages, $_) } packageDepsId($p);

		    my @m3 = ((grep { !/^\d$/ } @m), @m2);
		    if (member('INSTALL', @m3)) {
			member('NOCOPY', @m3) or push @{$packages->{needToCopy} ||= []}, $_;
			next; #- don't need to put INSTALL flag for a package.
		    }
		    if (packageRate($p)) {
			my ($rate2, @m4) = packageRateRFlags($p);
			if (@m3 > 1 || @m4 > 1) {
			    log::l("can't handle complicate flags for packages appearing twice ($_)");
			    $fatal_error++;
			}
			log::l("package $_ appearing twice with different rates ($rate != $rate2)") if $rate != $rate2;
			packageSetRateRFlags($p, $rate, "$m3[0]||$m4[0]");
		    } else {
			packageSetRateRFlags($p, $rate, @m3);
		    }
		} else {
		    print "$_ = ", join(" && ", @m), "\n";
		}
	    }
	    push @l, @l2;
	} else {
	    push @l, [ $l2[0][0], $l2[$#l2][1] ];
	}
    }
    $fatal_error and die "$fatal_error fatal errors in rpmsrate";
}

sub readCompssUsers {
    my ($meta_class) = @_;
    my (%compssUsers, @sorted, $l);

    my $file = 'Mandrake/base/compssUsers';
    my $f = $meta_class && install_any::getFile("$file.$meta_class") || install_any::getFile($file) or die "can't find $file";
    local $_;
    while (<$f>) {
	/^\s*$/ || /^#/ and next;
	s/#.*//;

	if (/^(\S.*)/) {
	    my $verbatim = $_;
	    my ($icon, $descr, $path);
	    /^(.*?)\s*\[path=(.*?)\](.*)/  and $_ = "$1$3", $path  = $2;
	    /^(.*?)\s*\[icon=(.*?)\](.*)/  and $_ = "$1$3", $icon  = $2;
	    /^(.*?)\s*\[descr=(.*?)\](.*)/ and $_ = "$1$3", $descr = $2;
	    $compssUsers{"$path|$_"} = { label => $_, verbatim => $verbatim, path => $path, icons => $icon, descr => $descr, flags => $l=[] };
	    push @sorted, "$path|$_";
	} elsif (/^\s+(.*?)\s*$/) {
	    push @$l, $1;
	}
    }
    \%compssUsers, \@sorted;
}
sub saveCompssUsers {
    my ($prefix, $packages, $compssUsers, $sorted) = @_;
    my $flat;
    foreach (@$sorted) {
	my @fl = @{$compssUsers->{$_}{flags}};
	my %fl; $fl{$_} = 1 foreach @fl;
	$flat .= $compssUsers->{$_}{verbatim};
	foreach my $p (values %{$packages->{names}}) {
	    my ($rate, @flags) = packageRateRFlags($p);
	    if ($rate && grep { grep { !/^!/ && $fl{$_} } split('\|\|') } @flags) {
		$flat .= sprintf "\t%d %s\n", $rate, packageName($p);
	    }
	}
    }
    output "$prefix/var/lib/urpmi/compssUsers.flat", $flat;
}

sub setSelectedFromCompssList {
    my ($packages, $compssUsersChoice, $min_level, $max_size, $otherOnly) = @_;
    $compssUsersChoice->{TRUE} = 1; #- ensure TRUE is set
    my $nb = selectedSize($packages);
    foreach my $p (sort { packageRate($b) <=> packageRate($a) } values %{$packages->{names}}) {
	my ($rate, @flags) = packageRateRFlags($p);
	next if 
	  !$rate || $rate < $min_level || 
	  grep { !grep { /^!(.*)/ ? !$compssUsersChoice->{$1} : $compssUsersChoice->{$_} } split('\|\|') } @flags;

	#- determine the packages that will be selected when
	#- selecting $p. the packages are not selected.
	my %newSelection;
	selectPackage($packages, $p, 0, \%newSelection);

	#- this enable an incremental total size.
	my $old_nb = $nb;
	foreach (grep { $newSelection{$_} } keys %newSelection) {
	    $nb += packageSize($packages->{names}{$_});
	}
	if ($max_size && $nb > $max_size) {
	    $nb = $old_nb;
	    $min_level = packageRate($p);
	    last;
	}

	#- at this point the package can safely be selected.
	if ($otherOnly) {
	    selectPackage($packages, $p, 0, $otherOnly);
	} else {
	    selectPackage($packages, $p);
	}
    }
    unless ($otherOnly) {
	log::l("setSelectedFromCompssList: reached size ", formatXiB($nb), ", up to indice $min_level (less than ", formatXiB($max_size), ")");
	log::l("setSelectedFromCompssList: ", join(" ", sort map { packageName($_) } grep { packageFlagSelected($_) } @{$packages->{depslist}}));
    }
    $min_level;
}

#- usefull to know the size it would take for a given min_level/max_size
#- just saves the selected packages, call setSelectedFromCompssList and restores the selected packages
sub saveSelected {
    my ($packages) = @_;
    my @l = values %{$packages->{names}};
    my @flags = map { packageFlagSelected($_) } @l;
    [ $packages, \@l, \@flags ];
}
sub restoreSelected {
    my ($packages, $l, $flags) = @{$_[0]};
    mapn { packageSetFlagSelected(@_) } $l, $flags;
}

sub computeGroupSize {
    my ($packages, $min_level) = @_;

    sub inside {
	my ($l1, $l2) = @_;
	my $i = 0;
	return if @$l1 > @$l2;
	foreach (@$l1) {
	    my $c;
	    while ($c = $l2->[$i++] cmp $_ ) {
		return if $c == 1 || $i > @$l2;
	    }
	}
	1;
    }

    sub or_ify {
	my ($first, @other) = @_;
	my @l = split('\|\|', $first);
	foreach (@other) {
	    @l = map {
		my $n = $_;
		map { "$_&&$n" } @l;
	    } split('\|\|');
	}
	#- HACK, remove LOCALES & CHARSET, too costly
	grep { !/LOCALES|CHARSET/ } @l;
    }
    sub or_clean {
	my (@l) = map { [ sort split('&&') ] } @_ or return '';
	my @r;
	B: while (@l) {
	    my $e = shift @l;
	    foreach (@r, @l) {
		inside($e, $_) and next B;
	    }
	    push @r, $e;
	}
	join("\t", map { join('&&', @$_) } @r);
    }
    my (%group, %memo);

    foreach my $p (values %{$packages->{names}}) {
	my ($rate, @flags) = packageRateRFlags($p);
	next if !$rate || $rate < $min_level;

	my $flags = join("\t", @flags = or_ify(@flags));
	$group{packageName($p)} = ($memo{$flags} ||= or_clean(@flags));

	#- determine the packages that will be selected when selecting $p. the packages are not selected.
	my %newSelection;
	selectPackage($packages, $p, 0, \%newSelection);
	foreach (grep { $newSelection{$_} } keys %newSelection) {
	    my $s = $group{$_} || do {
		$packages->{names}{$_}[$VALUES] =~ /\t(.*)/;
		join("\t", or_ify(split("\t", $1)));
	    };
	    next if length($s) > 80; # HACK, truncated too complicated expressions, too costly
	    my $m = "$flags\t$s";
	    $group{$_} = ($memo{$m} ||= or_clean(@flags, split("\t", $s)));
	}
    }
    my (%sizes, %pkgs);
    while (my ($k, $v) = each %group) {
	push @{$pkgs{$v}}, $k;
	$sizes{$v} += packageSize($packages->{names}{$k});
    }
    log::l(sprintf "%s %dMB %s", $_, $sizes{$_} / sqr(1024), join(',', @{$pkgs{$_}})) foreach keys %sizes;
    \%sizes, \%pkgs;
}


sub init_db {
    my ($prefix) = @_;

    my $f = "$prefix/root/drakx/install.log";
    open(LOG, ">> $f") ? log::l("opened $f") : log::l("Failed to open $f. No install log will be kept.");
    *LOG or *LOG = log::F() or *LOG = *STDERR;
    CORE::select((CORE::select(LOG), $| = 1)[0]);
    c::rpmErrorSetCallback(fileno LOG);
#-    c::rpmSetVeryVerbose();

    log::l("reading /usr/lib/rpm/rpmrc");
    c::rpmReadConfigFiles() or die "can't read rpm config files";
    log::l("\tdone");
}

sub rebuild_db_open_for_traversal {
    my ($packages, $prefix) = @_;

    log::l("reading /usr/lib/rpm/rpmrc");
    c::rpmReadConfigFiles() or die "can't read rpm config files";
    log::l("\tdone");

    unless (exists $packages->{rebuild_db}) {
	if (my $pid = fork()) {
	    waitpid $pid, 0;
	    ($? & 0xff00) and die "rebuilding of rpm database failed";
	} else {
	    log::l("rebuilding rpm database");
	    my $rebuilddb_dir = "$prefix/var/lib/rpmrebuilddb.$$";
	    -d $rebuilddb_dir and log::l("removing stale directory $rebuilddb_dir"), rm_rf($rebuilddb_dir);

	    c::rpmdbRebuild($prefix) or log::l("rebuilding of rpm database failed: ". c::rpmErrorString()), c::_exit(2);

	    c::_exit(0);
	}
	$packages->{rebuild_db} = undef;
    }

    my $db = c::rpmdbOpenForTraversal($prefix) or die "unable to open $prefix/var/lib/rpm/Packages";
    log::l("opened rpm database for examining existing packages");

    $db;
}

sub clean_old_rpm_db {
    my ($prefix) = @_;
    my $failed;

    foreach (qw(Basenames Conflictname Group Name Packages Providename Requirename Triggername)) {
	-s "$prefix/var/lib/rpm/$_" or $failed = 'failed';
    }
    #- rebuilding has been successfull, so remove old rpm database if any.
    #- once we have checked the rpm4 db file are present and not null, in case
    #- of doubt, avoid removing them...
    unless ($failed) {
	log::l("rebuilding rpm database completed successfully");
	foreach (qw(conflictsindex.rpm fileindex.rpm groupindex.rpm nameindex.rpm packages.rpm
                    providesindex.rpm requiredby.rpm triggerindex.rpm)) {
	    -e "$prefix/var/lib/rpm/$_" or next;
	    log::l("removing old rpm file $_");
	    rm_rf("$prefix/var/lib/rpm/$_");
	}
    }
}

sub done_db {
    log::l("closing install.log file");
    close LOG;
}

sub versionCompare($$) {
    goto &c::rpmvercmp;
}
#- old code using perl version, still broken on some case.
#-    my ($a, $b) = @_;
#-    local $_;
#-
#-    while ($a || $b) {
#-	my ($sb, $sa) =  map { $1 if $a =~ /^\W*\d/ ? s/^\W*0*(\d+)// : s/^\W*(\D*)// } ($b, $a);
#-	$_ = ($sa =~ /^\d/ || $sb =~ /^\d/) && length($sa) <=> length($sb) || $sa cmp $sb and return $_ || 0;
#-	$sa eq '' && $sb eq '' and return $a cmp $b || 0;
#-    }

sub selectPackagesAlreadyInstalled {
    my ($packages, $prefix) = @_;

    #- avoid rebuilding the database if such case.
    $packages->{rebuild_db} = "oem does not need rebuilding the rpm db";
    my $db = rebuild_db_open_for_traversal($packages, $prefix);

    #- this method has only one objectif, check the presence of packages
    #- already installed and avoid installing them again. this is to be used
    #- with oem installation, if the database exists, preselect the packages
    #- installed WHATEVER their version/release (log if a problem is perceived
    #- is enough).
    c::rpmdbTraverse($db, sub {
			 my ($header) = @_;
			 my $p = $packages->{names}{c::headerGetEntry($header, 'name')};

			 if ($p) {
			     my $epoch_cmp = c::headerGetEntry($header, 'epoch') <=> packageEpoch($p);
			     my $version_cmp = $epoch_cmp == 0 && versionCompare(c::headerGetEntry($header, 'version'),
										 packageVersion($p));
			     my $version_rel_test = $epoch_cmp > 0 || $epoch_cmp == 0 &&
			       ($version_cmp > 0 || $version_cmp == 0 &&
				versionCompare(c::headerGetEntry($header, 'release'), packageRelease($p)) >= 0);
			     $version_rel_test or log::l("keeping an older package, avoiding selecting $p->[$FILE]");
			     packageSetFlagInstalled($p, 1);
			 }
		     });

    #- close db, job finished !
    c::rpmdbClose($db);
    log::l("done selecting packages to upgrade");
}

sub selectPackagesToUpgrade($$$;$$) {
    my ($packages, $prefix, $base, $toRemove, $toSave) = @_;
    local $_; #- else perl complains on the map { ... } grep { ... } @...;

    local (*UPGRADE_INPUT, *UPGRADE_OUTPUT); pipe UPGRADE_INPUT, UPGRADE_OUTPUT;
    if (my $pid = fork()) {
	@{$toRemove || []} = (); #- reset this one.

	close UPGRADE_OUTPUT;
	while (<UPGRADE_INPUT>) {
	    chomp;
	    my ($action, $name) = /^([\w\d]*):(.*)/;
	    for ($action) {
		/remove/    and do { push @$toRemove, $name; next };
		/keepfiles/ and do { push @$toSave, $name; next };

		my $p = $packages->{names}{$name} or die "unable to find package ($name)";
		/^\d*$/     and do { $p->[$INSTALLED_CUMUL_SIZE] = $action; next };
		/installed/ and do { packageSetFlagInstalled($p, 1); next };
		/select/    and do { selectPackage($packages, $p); next };

		die "unknown action ($action)";
	    }
	}
	close UPGRADE_INPUT;
	waitpid $pid, 0;
    } else {
	close UPGRADE_INPUT;
	
	my $db = rebuild_db_open_for_traversal($packages, $prefix);
	#- used for package that are not correctly updated.
	#- should only be used when nothing else can be done correctly.
	my %upgradeNeedRemove = (
#				 'libstdc++' => 1,
#				 'compat-glibc' => 1,
#				 'compat-libs' => 1,
				);

	#- generel purpose for forcing upgrade of package whatever version is.
	my %packageNeedUpgrade = (
				  #'lilo' => 1, #- this package has been misnamed in 7.0.
				 );

	#- help removing package which may have different release numbering
	my %toRemove; map { $toRemove{$_} = 1 } @{$toRemove || []};

	#- help searching package to upgrade in regard to already installed files.
	my %installedFilesForUpgrade;

	#- help keeping memory by this set of package that have been obsoleted.
	my %obsoletedPackages;

	#- make a subprocess here for reading filelist, this is important
	#- not to waste a lot of memory for the main program which will fork
	#- latter for each transaction.
	local (*INPUT, *OUTPUT_CHILD); pipe INPUT, OUTPUT_CHILD;
	local (*INPUT_CHILD, *OUTPUT); pipe INPUT_CHILD, OUTPUT;
	if (my $pid = fork()) {
	    close INPUT_CHILD;
	    close OUTPUT_CHILD;
	    select((select(OUTPUT), $| = 1)[0]);

	    #- internal reading from interactive mode of parsehdlist.
	    #- takes a code to call with the line read, this avoid allocating
	    #- memory for that.
	    my $ask_child = sub {
		my ($name, $tag, $code) = @_;
		$code or die "no callback code for parsehdlist output";
		print OUTPUT "$name:$tag\n";

		local $_;
		while (<INPUT>) {
		    chomp;
		    /^\s*$/ and last;
		    $code->($_);
		}
	    };

	    #- select packages which obseletes other package, obselete package are not removed,
	    #- should we remove them ? this could be dangerous !
	    foreach my $p (values %{$packages->{names}}) {
		$ask_child->(packageName($p), "obsoletes", sub {
				 #- take care of flags and version and release if present
				 local ($_) = @_;
				 if (my ($n,$o,$v,$r) = /^(\S*)\s*(\S*)\s*([^\s-]*)-?(\S*)/) {
				     my $obsoleted = 0;
				     my $check_obsoletes = sub {
					 my ($header) = @_;
					 (!$v || eval(versionCompare(c::headerGetEntry($header, 'version'), $v) . $o . 0)) &&
					   (!$r || versionCompare(c::headerGetEntry($header, 'version'), $v) != 0 ||
					    eval(versionCompare(c::headerGetEntry($header, 'release'), $r) . $o . 0)) or return;
					 ++$obsoleted;
				     };
				     c::rpmdbNameTraverse($db, $n, $check_obsoletes);
				     if ($obsoleted > 0) {
					 log::l("selecting " . packageName($p) . " by selection on obsoletes");
					 $obsoletedPackages{$1} = undef;
					 selectPackage($packages, $p);
				     }
				 }
			     });
	    }

	    #- mark all files which are not in /etc/rc.d/ for packages which are already installed but which
	    #- are not in the packages list to upgrade.
	    #- the 'installed' property will make a package unable to be selected, look at select.
	    c::rpmdbTraverse($db, sub {
				 my ($header) = @_;
				 my $otherPackage = (c::headerGetEntry($header, 'release') !~ /mdk\w*$/ &&
						     (c::headerGetEntry($header, 'name'). '-' .
						      c::headerGetEntry($header, 'version'). '-' .
						      c::headerGetEntry($header, 'release')));
				 my $p = $packages->{names}{c::headerGetEntry($header, 'name')};

				 if ($p) {
				     my $epoch_cmp = c::headerGetEntry($header, 'epoch') <=> packageEpoch($p);
				     my $version_cmp = $epoch_cmp == 0 && versionCompare(c::headerGetEntry($header, 'version'),
											 packageVersion($p));
				     my $version_rel_test = $epoch_cmp > 0 || $epoch_cmp == 0 &&
				       ($version_cmp > 0 || $version_cmp == 0 &&
					versionCompare(c::headerGetEntry($header, 'release'), packageRelease($p)) >= 0);
				     if ($packageNeedUpgrade{packageName($p)}) {
					 log::l("package ". packageName($p) ." need to be upgraded");
				     } elsif ($version_rel_test) { #- by default, package are upgraded whatever version is !
					 if ($otherPackage && $version_cmp <= 0) {
					     log::l("force upgrading $otherPackage since it will not be updated otherwise");
					 } else {
					     #- let the parent known this installed package.
					     print UPGRADE_OUTPUT "installed:" . packageName($p) . "\n";
					     packageSetFlagInstalled($p, 1);
					 }
				     } elsif ($upgradeNeedRemove{packageName($p)}) {
					 my $otherPackage = (c::headerGetEntry($header, 'name'). '-' .
							     c::headerGetEntry($header, 'version'). '-' .
							     c::headerGetEntry($header, 'release'));
					 log::l("removing $otherPackage since it will not upgrade correctly!");
					 $toRemove{$otherPackage} = 1; #- force removing for theses other packages, select our.
				     }
				 } else {
				     if (exists $obsoletedPackages{c::headerGetEntry($header, 'name')}) {
					 my @files = c::headerGetEntry($header, 'filenames');
					 @installedFilesForUpgrade{grep { ($_ !~ m|^/dev/| && $_ !~ m|^/etc/rc.d/| && $_ !~ m|\.la$| &&
									   ! -d "$prefix/$_" && ! -l "$prefix/$_") } @files} = ();
				     }
				 }
			     });

	    #- find new packages to upgrade.
	    foreach my $p (values %{$packages->{names}}) {
		my $skipThis = 0;
		my $count = c::rpmdbNameTraverse($db, packageName($p), sub {
						     my ($header) = @_;
						     $skipThis ||= packageFlagInstalled($p);
						 });

		#- skip if not installed (package not found in current install).
		$skipThis ||= ($count == 0);

		#- make sure to upgrade package that have to be upgraded.
		$packageNeedUpgrade{packageName($p)} and $skipThis = 0;

		#- select the package if it is already installed with a lower version or simply not installed.
		unless ($skipThis) {
		    my $cumulSize;

		    selectPackage($packages, $p);

		    #- keep in mind installed files which are not being updated. doing this costs in
		    #- execution time but use less memory, else hash all installed files and unhash
		    #- all file for package marked for upgrade.
		    c::rpmdbNameTraverse($db, packageName($p), sub {
					     my ($header) = @_;
					     $cumulSize += c::headerGetEntry($header, 'size');
					     my @files = c::headerGetEntry($header, 'filenames');
					     @installedFilesForUpgrade{grep { ($_ !~ m|^/dev/| && $_ !~ m|^/etc/rc.d/| && $_ !~ m|\.la$| &&
									   ! -d "$prefix/$_" && ! -l "$prefix/$_") } @files} = ();
					 });

		    $ask_child->(packageName($p), "files", sub {
				     delete $installedFilesForUpgrade{$_[0]};
				 });

		    #- keep in mind the cumul size of installed package since they will be deleted
		    #- on upgrade, only for package that are allowed to be upgraded.
		    if (allowedToUpgrade(packageName($p))) {
			print UPGRADE_OUTPUT "$cumulSize:" . packageName($p) . "\n";
		    }
		}
	    }

	    #- unmark all files for all packages marked for upgrade. it may not have been done above
	    #- since some packages may have been selected by depsList.
	    foreach my $p (values %{$packages->{names}}) {
		if (packageFlagSelected($p)) {
		    $ask_child->(packageName($p), "files", sub {
				     delete $installedFilesForUpgrade{$_[0]};
				 });
		}
	    }

	    #- select packages which contains marked files, then unmark on selection.
	    #- a special case can be made here, the selection is done only for packages
	    #- requiring locales if the locales are selected.
	    #- another special case are for devel packages where fixes over the time has
	    #- made some files moving between the normal package and its devel couterpart.
	    #- if only one file is affected, no devel package is selected.
	    foreach my $p (values %{$packages->{names}}) {
		unless (packageFlagSelected($p)) {
		    my $toSelect = 0;
		    $ask_child->(packageName($p), "files", sub {
				     if ($_[0] !~ m|^/dev/| && $_[0] !~  m|^/etc/rc.d/| &&  $_ !~ m|\.la$| && exists $installedFilesForUpgrade{$_[0]}) {
					 ++$toSelect if ! -d "$prefix/$_[0]" && ! -l "$prefix/$_[0]";
				     }
				     delete $installedFilesForUpgrade{$_[0]};
				 });
		    if ($toSelect) {
			if ($toSelect <= 1 && packageName($p) =~ /-devel/) {
			    log::l("avoid selecting " . packageName($p) . " as not enough files will be updated");
			} else {
			    #- default case is assumed to allow upgrade.
			    my @deps = map { my $p = packageById($packages, $_);
					     if_($p && packageName($p) =~ /locales-/, $p) } packageDepsId($p);
			    if (@deps == 0 || @deps > 0 && (grep { !packageFlagSelected($_) } @deps) == 0) {
				log::l("selecting " . packageName($p) . " by selection on files");
				selectPackage($packages, $p);
			    } else {
				log::l("avoid selecting " . packageName($p) . " as its locales language is not already selected");
			    }
			}
		    }
		}
	    }

	    #- clean memory...
	    %installedFilesForUpgrade = ();

	    #- no need to still use the child as this point, we can let him to terminate.
	    close OUTPUT;
	    close INPUT;
	    waitpid $pid, 0;
	} else {
	    close INPUT;
	    close OUTPUT;
	    open STDIN, "<&INPUT_CHILD";
	    open STDOUT, ">&OUTPUT_CHILD";
	    exec if_($ENV{LD_LOADER}, $ENV{LD_LOADER}), "parsehdlist", "--interactive", map { "/tmp/$_->{hdlist}" } values %{$packages->{mediums}}
	      or c::_exit(1);
	}

	#- let the parent known about what we found here!
	foreach my $p (values %{$packages->{names}}) {
	    print UPGRADE_OUTPUT "select:" . packageName($p) . "\n" if packageFlagSelected($p);
	}

	#- clean false value on toRemove.
	delete $toRemove{''};

	#- get filenames that should be saved for packages to remove.
	#- typically config files, but it may broke for packages that
	#- are very old when compabilty has been broken.
	#- but new version may saved to .rpmnew so it not so hard !
	if ($toSave && keys %toRemove) {
	    c::rpmdbTraverse($db, sub {
				 my ($header) = @_;
				 my $otherPackage = (c::headerGetEntry($header, 'name'). '-' .
						     c::headerGetEntry($header, 'version'). '-' .
						     c::headerGetEntry($header, 'release'));
				 if ($toRemove{$otherPackage}) {
				     print UPGRADE_OUTPUT "remove:$otherPackage\n";
				     if (packageFlagBase($packages->{names}{c::headerGetEntry($header, 'name')})) {
					 delete $toRemove{$otherPackage}; #- keep it selected, but force upgrade.
				     } else {
					 my @files = c::headerGetEntry($header, 'filenames');
					 my @flags = c::headerGetEntry($header, 'fileflags');
					 for my $i (0..$#flags) {
					     if ($flags[$i] & c::RPMFILE_CONFIG()) {
						 print UPGRADE_OUTPUT "keepfiles:$files[$i]\n" unless $files[$i] =~ /kdelnk/;
					     }
					 }
				     }
				 }
			     });
	}

	#- close db, job finished !
	c::rpmdbClose($db);
	log::l("done selecting packages to upgrade");

	close UPGRADE_OUTPUT;
	c::_exit(0);
    }

    #- keep a track of packages that are been selected for being upgraded,
    #- these packages should not be unselected (unless expertise)
    foreach my $p (values %{$packages->{names}}) {
	packageSetFlagUpgrade($p, 1) if packageFlagSelected($p);
    }
}

sub allowedToUpgrade { $_[0] !~ /^(kernel|kernel22|kernel2.2|kernel-secure|kernel-smp|kernel-linus|kernel-linus2.2|hackkernel|kernel-enterprise)$/ }

sub installCallback {
#    my $msg = shift;
#    log::l($msg .": ". join(',', @_));
}

sub install($$$;$$) {
    my ($prefix, $isUpgrade, $toInstall, $depOrder, $media) = @_;
    my %packages;

    return if $::g_auto_install || !scalar(@$toInstall);

    #- for root loopback'ed /boot
    my $loop_boot = loopback::prepare_boot($prefix);

    #- first stage to extract some important informations
    #- about the packages selected. this is used to select
    #- one or many transaction.
    my ($total, $nb);
    foreach my $pkg (@$toInstall) {
	$packages{packageName($pkg)} = $pkg;
	$nb++;
	$total += to_int($pkg->[$SIZE_DEPS]); #- do not correct for upgrade!
    }

    log::l("pkgs::install $prefix");
    log::l("pkgs::install the following: ", join(" ", keys %packages));
    eval { fs::mount("/proc", "$prefix/proc", "proc", 0) } unless -e "$prefix/proc/cpuinfo";

    init_db($prefix);

    my $callbackOpen = sub {
	my $p = $packages{$_[0]} or log::l("unable to retrieve package of $_[0]"), return -1;
	my $f = packageFile($p);
	print LOG "$f $media->{$p->[$MEDIUM]}{descr}\n";
	my $fd = install_any::getFile($f, $media->{$p->[$MEDIUM]}{descr});
	$fd ? fileno $fd : -1;
    };
    my $callbackClose = sub { packageSetFlagInstalled($packages{$_[0]}, 1) };

    #- do not modify/translate the message used with installCallback since
    #- these are keys during progressing installation, or change in other
    #- place (install_steps_gtk.pm,...).
    installCallback("Starting installation", $nb, $total);

    my ($i, $min, $medium) = (0, 0, 1);
    do {
	my @transToInstall;

	if (!$depOrder || !$media) {
	    @transToInstall = values %packages;
	    $nb = 0;
	} else {
	    do {
		#- change current media if needed.
		if ($i > $media->{$medium}{max}) {
		    #- search for media that contains the desired package to install.
		    foreach (keys %$media) {
			$i >= $media->{$_}{min} && $i <= $media->{$_}{max} and $medium = $_, last;
		    }
		}
		$i >= $media->{$medium}{min} && $i <= $media->{$medium}{max} or die "unable to find right medium";
		install_any::useMedium($medium);

		while ($i <= $media->{$medium}{max} && ($i < $min || scalar @transToInstall < $limitMinTrans)) {
		    my $pkg = $depOrder->[$i++] or next;
		    my $dep = $packages{packageName($pkg)} or next;
		    if ($media->{$dep->[$MEDIUM]}{selected}) {
			push @transToInstall, $dep;
			foreach (map { split '\|' } packageDepsId($dep)) {
			    $min < $_ and $min = $_;
			}
		    } else {
			log::l("ignoring package $dep->[$FILE] as its medium is not selected");
		    }
		    --$nb; #- make sure the package is not taken into account as its medium is not selected.
		}
	    } while ($nb > 0 && scalar(@transToInstall) == 0); #- avoid null transaction, it a nop that cost a bit.
	}

	#- added to exit typically after last media unselected.
	if ($nb == 0 && scalar(@transToInstall) == 0) {
	    cleanHeaders($prefix);

	    loopback::save_boot($loop_boot);
	    return;
	}

	#- extract headers for parent as they are used by callback.
	extractHeaders($prefix, \@transToInstall, $media);

	if ($media->{$medium}{method} eq 'cdrom') {
	    #- extract packages to make sure the getFile below to force
	    #- accessing medium will not be redirected to updates.
	    my @origin = grep { $_->[$MEDIUM] == $medium } @transToInstall;

	    if (@origin) {
		#- reset file descriptor open for main process but
		#- make sure error trying to change from hdlist are
		#- trown from main process too.
		install_any::getFile(packageFile($origin[0]), $media->{$origin[0][$MEDIUM]}{descr});

		#- allow some log here to check selected status.
		log::l("status for medium $origin[0][$MEDIUM] ($media->{$origin[0][$MEDIUM]}{descr}) is " .
		       ($media->{$origin[0][$MEDIUM]}{selected} ? "selected" : "refused"));
	    }
	}
	#- and make sure there are no staling open file descriptor too (before forking)!
	install_any::getFile('XXX');

	my ($retry_package, $retry_count);
	while ($retry_package || @transToInstall) {
	    local (*INPUT, *OUTPUT); pipe INPUT, OUTPUT;
	    if (my $pid = fork()) {
		close OUTPUT;
		my $error_msg = '';
		local $_;
		while (<INPUT>) {
		    if (/^die:(.*)/) {
			$error_msg = $1;
			last;
		    } else {
			chomp;
			my @params = split ":";
			if ($params[0] eq 'close') {
			    &$callbackClose($params[1]);
			} else {
			    installCallback(@params);
			}
		    }
		}
		$error_msg and $error_msg .= join('', <INPUT>);
		waitpid $pid, 0;
		close INPUT;
		$error_msg and die $error_msg;
	    } else {
		#- child process will run each transaction.
		$SIG{SEGV} = sub { log::l("segmentation fault on transactions"); c::_exit(0) };
		my @prev_pids = grep { /^\d+$/ } all("/proc");
		my $db;
		eval {
		    close INPUT;
		    select((select(OUTPUT),  $| = 1)[0]);
		    $db = c::rpmdbOpen($prefix) or die "error opening RPM database: ", c::rpmErrorString();
		    my $trans = c::rpmtransCreateSet($db, $prefix);
		    if ($retry_package) {
			log::l("opened rpm database for retry transaction of 1 package only");
			c::rpmtransAddPackage($trans, $retry_package->[$HEADER], packageName($retry_package),
					      $isUpgrade && allowedToUpgrade(packageName($retry_package)));
		    } else {
			log::l("opened rpm database for transaction of ". scalar @transToInstall ." new packages, still $nb after that to do");
			c::rpmtransAddPackage($trans, $_->[$HEADER], packageName($_),
					      $isUpgrade && allowedToUpgrade(packageName($_)))
			    foreach @transToInstall;
		    }

		    c::rpmdepOrder($trans) or die "error ordering package list: " . c::rpmErrorString();
		    c::rpmtransSetScriptFd($trans, fileno LOG);

		    log::l("rpmRunTransactions start");
		    my @probs = c::rpmRunTransactions($trans, $callbackOpen,
						      sub { #- callbackClose
							  my $p = $packages{$_[0]} or return;
							  my $check_installed;
							  c::rpmdbNameTraverse($db, packageName($p), sub {
										   my ($header) = @_;
										   $check_installed ||= c::headerGetEntry($header, 'version') eq packageVersion($p) && c::headerGetEntry($header, 'release') eq packageRelease($p);
									       });
							  $check_installed and print OUTPUT "close:$_[0]\n"; },
						      sub { #- installCallback
							  print OUTPUT join(":", @_), "\n"; },
						      1);
		    log::l("rpmRunTransactions done, now trying to close still opened fd");
		    install_any::getFile('XXX'); #- close still opened fd.

		    if (@probs) {
			my %parts;
			@probs = reverse grep {
			    if (s/(installing package) .* (needs (?:.*) on the (.*) filesystem)/$1 $2/) {
				$parts{$3} ? 0 : ($parts{$3} = 1);
			    } else {
				1;
			    }
			} reverse map { s|/mnt||; $_ } @probs;

			c::rpmdbClose($db);
			die "installation of rpms failed:\n  ", join("\n  ", @probs);
		    }
		}; $@ and print OUTPUT "die:$@\n";

		c::rpmdbClose($db);
		log::l("rpm database closed");

		close OUTPUT;

		#- now search for child process which may be locking the cdrom, making it unable to be ejected.
		my @allpids = grep { /^\d+$/ } all("/proc");
		my %ppids;
		foreach (@allpids) {
		    cat_("/proc/$_/status") =~ /^PPid:\s+(\d+)/m;
		    push @{$ppids{$1 || 1}}, $_;
		}
		my @killpid = difference2(\@allpids, [ @prev_pids, 
						       difference2([ $$, hashtree2list(getppid, \%ppids) ],
								   [ hashtree2list($$, \%ppids) ]) ]);
	
		if (@killpid) {
		    log::l("ERROR: DrakX should not have to clean the packages shit. Killing ". join(", ", @killpid));
		    kill 15, @killpid;
		    sleep 2;
		    kill 9, @killpid;
		}

		c::_exit(0);
	    }

	    #- if we are using a retry mode, this means we have to split the transaction with only
	    #- one package for each real transaction.
	    unless ($retry_package) {
		my @badPackages;
		foreach (@transToInstall) {
		    if (!packageFlagInstalled($_) && $media->{$_->[$MEDIUM]}{selected} && !exists($ignoreBadPkg{packageName($_)})) {
			push @badPackages, $_;
			log::l("bad package $_->[$FILE]");
		    } else {
			packageFreeHeader($_);
		    }
		}
		@transToInstall = @badPackages;
		#- if we are in retry mode, we have to fetch only one package at a time.
		$retry_package = shift @transToInstall;
		$retry_count = 3;
	    } else {
		if (!packageFlagInstalled($retry_package) && $media->{$retry_package->[$MEDIUM]}{selected} && !exists($ignoreBadPkg{packageName($retry_package)})) {
		    if ($retry_count) {
			log::l("retrying installing package $retry_package->[$FILE] alone in a transaction");
			--$retry_count;
		    } else {
			log::l("bad package $retry_package->[$FILE] unable to be installed");
			packageSetFlagSelected($retry_package, 0);
			cdie ("error installing package list: $retry_package->[$FILE]");
		    }
		}
		if (packageFlagInstalled($retry_package) || ! packageFlagSelected($retry_package)) {
		    packageFreeHeader($retry_package);
		    $retry_package = shift @transToInstall;
		    $retry_count = 3;
		}
	    }
	}
	cleanHeaders($prefix);
    } while ($nb > 0 && !$pkgs::cancel_install);

    done_db();

    cleanHeaders($prefix);

    loopback::save_boot($loop_boot);
}

sub remove($$) {
    my ($prefix, $toRemove) = @_;

    return if $::g_auto_install || !@{$toRemove || []};

    log::l("reading /usr/lib/rpm/rpmrc");
    c::rpmReadConfigFiles() or die "can't read rpm config files";
    log::l("\tdone");

    my $db = c::rpmdbOpen($prefix) or die "error opening RPM database: ", c::rpmErrorString();
    log::l("opened rpm database for removing old packages");

    my $trans = c::rpmtransCreateSet($db, $prefix);

    foreach my $p (@$toRemove) {
	#- stuff remove all packages that matches $p, not a problem since $p has name-version-release format.
	c::rpmtransRemovePackages($db, $trans, $p) if allowedToUpgrade($p);
    }

    eval { fs::mount("/proc", "$prefix/proc", "proc", 0) } unless -e "$prefix/proc/cpuinfo";

    my $callbackOpen = sub { log::l("trying to open file from $_[0] which should not happen"); };
    my $callbackClose = sub { log::l("trying to close file from $_[0] which should not happen"); };

    #- we are not checking depends since it should come when
    #- upgrading a system. although we may remove some functionalities ?

    #- do not modify/translate the message used with installCallback since
    #- these are keys during progressing installation, or change in other
    #- place (install_steps_gtk.pm,...).
    installCallback("Starting removing other packages", scalar @$toRemove);

    if (my @probs = c::rpmRunTransactions($trans, $callbackOpen, $callbackClose, \&installCallback, 1)) {
	die "removing of old rpms failed:\n  ", join("\n  ", @probs);
    }
    c::rpmtransFree($trans);
    c::rpmdbClose($db);
    log::l("rpm database closed");

    #- keep in mind removing of these packages by cleaning $toRemove.
    @{$toRemove || []} = ();
}

sub selected_leaves {
    my ($packages) = @_;
    my %l;

    #- initialize l with all id, not couting base package.
    foreach my $id (0 .. $#{$packages->{depslist}}) {
	my $pkg = packageById($packages, $id) or next;
	packageSelectedOrInstalled($pkg) && !packageFlagBase($pkg) or next;
	$l{$id} = 1;
    }

    foreach my $id (keys %l) {
	#- when a package is in a choice, increase its value in hash l, because
	#- it has to be examined before when we will select them later.
	#- NB: this number may be computed before to save time.
	my $p = $packages->{depslist}[$id] or next;
	foreach (packageDepsId($p)) {
	    if (/\|/) {
		foreach (split '\|') {
		    exists $l{$_} or next;
		    $l{$_} > 1 + $l{$id} or $l{$_} = 1 + $l{$id};
		}
	    }
	}
    }

    #- at this level, we can remove selected packages that are already
    #- required by other, but we have to sort according to choice usage.
    foreach my $id (sort { $l{$b} <=> $l{$a} || $b <=> $a } keys %l) {
	#- do not count already deleted id, else cycles will be removed.
	$l{$id} or next;

	my $p = $packages->{depslist}[$id] or next;
	foreach (packageDepsId($p)) {
	    #- choices need no more to be examined, this has been done above.
	    /\|/ and next;
	    #- improve value of this one, so it will be selected before.
	    $l{$id} < $l{$_} and $l{$id} = $l{$_};
	    $l{$_} = 0;
	}
    }

    #- now sort again according to decrementing value, and gives packages name.
    [ map { packageName($packages->{depslist}[$_]) } sort { $l{$b} <=> $l{$a} } grep { $l{$_} > 0 } keys %l ];
}


sub naughtyServers {
    my ($packages) = @_;

    my @old = qw(
freeswan
jabber
);
    # boa ??
    my @sure = qw(
FreeWnn
MySQL
am-utils
apache
boa
cfengine
cups
drakxtools-http
finger-server
imap
leafnode
lpr
mon
ntp
openssh-server
pidentd
postfix
postgresql-server
proftpd
rwall
rwho
squid
webmin
wu-ftpd
ypbind
); # nfs-utils-clients portmap
   # X server

  my @new = qw(
apache-mod_perl
ftp-server-krb5
mcserv
mysql
samba
telnet-server-krb5
vnc-server
ypserv
);

    my @naughtyServers = (@new, @sure);

    grep {
	my $p = packageByName($packages, $_);
	$p && packageFlagSelected($p);
    } @naughtyServers;
}

sub hashtree2list {
    my ($e, $h) = @_;
    my @l;
    my @todo = $e;
    while (@todo) {
	my $e = shift @todo;
	push @l, $e;
	push @todo, @{$h->{$e}};
    }
    @l;
}

1;