package mouse; # $Id$ #use diagnostics; #use strict; #-###################################################################################### #- misc imports #-###################################################################################### use common; use modules; use detect_devices; use run_program; use devices; use modules; use any; use log; my @mouses_fields = qw(nbuttons MOUSETYPE XMOUSETYPE name EMULATEWHEEL); my %mice = arch() =~ /^sparc/ ? ( 'sunmouse' => [ [ 'sunmouse' ], [ [ 3, 'sun', 'sun', N_("Sun - Mouse") ] ] ] ) : ( 'PS/2' => [ [ 'psaux' ], [ [ 2, 'ps/2', 'PS/2', N_("Standard") ], [ 5, 'ps/2', 'MouseManPlusPS/2', N_("Logitech MouseMan+") ], [ 5, 'imps2', 'IMPS/2', N_("Generic PS2 Wheel Mouse") ], [ 5, 'ps/2', 'GlidePointPS/2', N_("GlidePoint") ], [ 5, 'imps2', c::kernel_version() =~ /^\Q2.4/ ? 'auto' : 'ExplorerPS/2', N_("Automatic") ], '', [ 5, 'ps/2', 'ThinkingMousePS/2', N_("Kensington Thinking Mouse") ], [ 5, 'netmouse', 'NetMousePS/2', N_("Genius NetMouse") ], [ 5, 'netmouse', 'NetScrollPS/2', N_("Genius NetScroll") ], [ 7, 'ps/2', 'ExplorerPS/2', N_("Microsoft Explorer") ], ] ], 'USB' => [ [ 'usbmouse' ], [ [ 1, 'ps/2', 'IMPS/2', N_("1 button") ], [ 2, 'ps/2', 'IMPS/2', N_("Generic 2 Button Mouse") ], [ 3, 'ps/2', 'IMPS/2', N_("Generic") ], [ 3, 'ps/2', 'IMPS/2', N_("Generic 3 Button Mouse with Wheel emulation"), 'wheel' ], [ 5, 'ps/2', 'IMPS/2', N_("Wheel") ], [ 7, 'ps/2', 'ExplorerPS/2', N_("Microsoft Explorer") ], ] ], N_("serial") => [ [ map { "ttyS$_" } 0..3 ], [ [ 2, 'Microsoft', 'Microsoft', N_("Generic 2 Button Mouse") ], [ 3, 'Microsoft', 'Microsoft', N_("Generic 3 Button Mouse") ], [ 3, 'Microsoft', 'Microsoft', N_("Generic 3 Button Mouse with Wheel emulation"), 'wheel' ], [ 5, 'ms3', 'IntelliMouse', N_("Microsoft IntelliMouse") ], [ 3, 'MouseMan', 'MouseMan', N_("Logitech MouseMan") ], [ 3, 'MouseMan', 'MouseMan', N_("Logitech MouseMan with Wheel emulation"), 'wheel' ], [ 2, 'MouseSystems', 'MouseSystems', N_("Mouse Systems") ], '', [ 3, 'logim', 'MouseMan', N_("Logitech CC Series") ], [ 3, 'logim', 'MouseMan', N_("Logitech CC Series with Wheel emulation"), 'wheel' ], [ 5, 'pnp', 'IntelliMouse', N_("Logitech MouseMan+/FirstMouse+") ], [ 5, 'ms3', 'IntelliMouse', N_("Genius NetMouse") ], [ 2, 'MMSeries', 'MMSeries', N_("MM Series") ], [ 2, 'MMHitTab', 'MMHittab', N_("MM HitTablet") ], [ 3, 'Logitech', 'Logitech', N_("Logitech Mouse (serial, old C7 type)") ], [ 3, 'Logitech', 'Logitech', N_("Logitech Mouse (serial, old C7 type) with Wheel emulation"), 'wheel' ], [ 3, 'Microsoft', 'ThinkingMouse', N_("Kensington Thinking Mouse") ], [ 3, 'Microsoft', 'ThinkingMouse', N_("Kensington Thinking Mouse with Wheel emulation"), 'wheel' ], ] ], N_("busmouse") => [ [ arch() eq 'ppc' ? 'adbmouse' : ('atibm', 'inportbm', 'logibm') ], [ if_(arch() eq 'ppc', [ 1, 'Busmouse', 'BusMouse', N_("1 button") ]), [ 2, 'Busmouse', 'BusMouse', N_("2 buttons") ], [ 3, 'Busmouse', 'BusMouse', N_("3 buttons") ], [ 3, 'Busmouse', 'BusMouse', N_("3 buttons with Wheel emulation"), 'wheel' ], ] ], N_("none") => [ [ 'none' ], [ [ 0, 'none', 'Microsoft', N_("No mouse") ], ] ], ); sub xmouse2xId { #- xmousetypes must be sorted as found in /usr/include/X11/extensions/xf86misc.h #- so that first mean "0", etc my @xmousetypes = ( "Microsoft", "MouseSystems", "MMSeries", "Logitech", "BusMouse", #MouseMan, "Logitech", "PS/2", "MMHittab", "GlidePoint", "IntelliMouse", "ThinkingMouse", "IMPS/2", "ThinkingMousePS/2", "MouseManPlusPS/2", "GlidePointPS/2", "NetMousePS/2", "NetScrollPS/2", "SysMouse", "Auto", "AceCad", "ExplorerPS/2", "USB", ); my ($id) = @_; $id = 'BusMouse' if $id eq 'MouseMan'; $id = 'IMPS/2' if $id eq 'ExplorerPS/2' && $::isInstall; eval { find_index { $_ eq $id } @xmousetypes } || 0; } my %mouse_btn_keymap = ( 0 => "NONE", 67 => "F9", 68 => "F10", 87 => "F11", 88 => "F12", 85 => "F13", 89 => "F14", 90 => "F15", 56 => "L-Option/Alt", 125 => "L-Command (Apple)", 98 => "Num: /", 55 => "Num: *", 117 => "Num: =", 96 => "Enter", ); sub ppc_one_button_keys() { keys %mouse_btn_keymap } sub ppc_one_button_key2text { $mouse_btn_keymap{$_[0]} } sub raw2mouse { my ($type, $raw) = @_; $raw or return; my %l; @l{@mouses_fields} = @$raw; +{ %l, type => $type }; } sub fullnames() { map_each { my $type = $::a; grep { $_ } map { if ($_) { my $l = raw2mouse($type, $_); "$type|$l->{name}"; } else { $type .= "|[" . N("Other") . "]"; ''; } } @{$::b->[1]} } %mice; } sub fullname2mouse { my ($fname, %opts) = @_; my ($type, @l) = split '\|', $fname; my ($name) = pop @l; search: $opts{device} ||= $mice{$type}[0][0]; foreach (@{$mice{$type}[1]}) { my $l = raw2mouse($type, $_); $name eq $l->{name} and return { %$l, %opts }; } if ($name eq '1 Button' || $name eq '1 button') { $name = "Generic 2 Button Mouse"; goto search; } die "$fname not found ($type, $name)"; } sub serial_ports() { map { "ttyS$_" } 0..7 } sub serial_port2text { $_[0] =~ /ttyS(\d+)/ ? "$_[0] / COM" . ($1 + 1) : $_[0]; } sub read() { my %mouse = getVarsFromSh "$::prefix/etc/sysconfig/mouse"; eval { add2hash_(\%mouse, fullname2mouse($mouse{FULLNAME})) }; $mouse{nbuttons} ||= $mouse{XEMU3} eq "yes" ? 2 : $mouse{WHEEL} eq "yes" ? 5 : 3; \%mouse; } sub write { my ($in, $mouse) = @_; local $mouse->{FULLNAME} = qq("$mouse->{type}|$mouse->{name}"); #-" local $mouse->{XEMU3} = bool2yesno($mouse->{nbuttons} < 3); local $mouse->{WHEEL} = bool2yesno($mouse->{nbuttons} > 3); setVarsInSh("$::prefix/etc/sysconfig/mouse", $mouse, qw(MOUSETYPE XMOUSETYPE FULLNAME XEMU3 WHEEL device)); any::devfssymlinkf($mouse, 'mouse'); #- we should be using input/mice directly instead of usbmouse, but legacy... symlinkf 'input/mice', "$::prefix/dev/usbmouse" if $mouse->{device} eq "usbmouse"; any::devfssymlinkf($mouse->{auxmouse}, 'mouse1') if $mouse->{auxmouse}; various_xfree_conf($in, $mouse); if (arch() =~ /ppc/) { my $s = join('', "dev.mac_hid.mouse_button_emulation = " . to_bool($mouse->{button2_key} || $mouse->{button3_key}) . "\n", if_($mouse->{button2_key}, "dev.mac_hid.mouse_button2_keycode = $mouse->{button2_key}\n"), if_($mouse->{button3_key}, "dev.mac_hid.mouse_button3_keycode = $mouse->{button3_key}\n"), ); substInFile { $_ = '' if /^\Qdev.mac_hid.mouse_button/; $_ .= $s if eof; } "$::prefix/etc/sysctl.conf"; } } sub probe_wacom_devices() { modules::get_probeall("usb-interface") or return; my (@l) = detect_devices::usbWacom() or return; log::l("found usb wacom $_->{driver} $_->{description} ($_->{type})") foreach @l; my @wacom = eval { modules::load("wacom", "evdev"); grep { detect_devices::tryOpen($_) } map_index { "input/event$::i" } @l }; @wacom or eval { modules::unload("evdev", "wacom") }; @wacom; } sub detect_serial() { my ($t, $mouse, @wacom); #- Whouah! probing all devices from ttyS0 to ttyS3 once a time! detect_devices::probeSerialDevices(); #- check new probing methods keep everything used here intact! foreach (0..3) { $t = detect_devices::probeSerial("/dev/ttyS$_") or next; if ($t->{CLASS} eq 'MOUSE') { $t->{MFG} ||= $t->{MANUFACTURER}; $mouse = fullname2mouse("serial|Microsoft IntelliMouse") if $t->{MFG} eq 'MSH' && $t->{MODEL} eq '0001'; $mouse = fullname2mouse("serial|Logitech MouseMan") if $t->{MFG} eq 'LGI' && $t->{MODEL} =~ /^80/; $mouse = fullname2mouse("serial|Genius NetMouse") if $t->{MFG} eq 'KYE' && $t->{MODEL} eq '0003'; $mouse ||= fullname2mouse("serial|Generic 2 Button Mouse"); #- generic by default. $mouse->{device} = "ttyS$_"; last; } elsif ($t->{CLASS} eq "PEN" || $t->{MANUFACTURER} eq "WAC") { push @wacom, "ttyS$_"; } } $mouse, @wacom; } sub detect() { if (arch() =~ /^sparc/) { return fullname2mouse("sunmouse|Sun - Mouse"); } if (arch() eq "ppc") { return fullname2mouse(detect_devices::hasMousePS2("usbmouse") ? "USB|1 button" : # No need to search for an ADB mouse. If I did, the PPC kernel would # find one whether or not I had one installed! So.. default to it. "busmouse|1 button"); } my $fast_mouse_probe = sub { my $auxmouse = detect_devices::hasMousePS2("psaux") && fullname2mouse("PS/2|Automatic", unsafe => 0); #- workaround for some special case were mouse is openable 1/2. unless ($auxmouse) { $auxmouse = detect_devices::hasMousePS2("psaux") && fullname2mouse("PS/2|Automatic", unsafe => 0); $auxmouse and detect_devices::hasMousePS2("psaux"); #- fake another open in order for XFree to see the mouse. } if (modules::get_probeall("usb-interface")) { sleep 2; if (my (@l) = detect_devices::usbMice()) { log::l(join('', "found usb mouse $_->{driver} $_->{description} (", if_($_->{type}, $_->{type}), ")")) foreach @l; eval { modules::load(qw(hid mousedev usbmouse)) }; if (!$@ && detect_devices::tryOpen("usbmouse")) { my $mouse = fullname2mouse($l[0]{driver} =~ /Mouse:(.*)/ ? $1 : "USB|Wheel"); $auxmouse and $mouse->{auxmouse} = $auxmouse; #- for laptop, we kept the PS/2 as secondary (symbolic). return $mouse; } eval { modules::unload(qw(usbmouse mousedev hid)) }; } } else { log::l("no usb interface found for mice"); } $auxmouse; }; my @wacom = probe_wacom_devices(); if (my $mouse = $fast_mouse_probe->()) { return { wacom => \@wacom, %$mouse }; } #- probe serial device to make sure a wacom has been detected. eval { modules::load("serial") }; my ($serial_mouse, @serial_wacom) = detect_serial(); push @wacom, @serial_wacom; if ($serial_mouse) { { wacom => \@wacom, %$serial_mouse }; } elsif (@wacom) { #- in case only a wacom has been found, assume an inexistant mouse (necessary). fullname2mouse('none|No mouse', wacom => \@wacom); } else { #- defaults to generic serial mouse on ttyS0. fullname2mouse("serial|Generic 2 Button Mouse", unsafe => 1); } } sub load_modules { my ($mouse) = @_; my @l; for ($mouse->{type}) { /serial/ and @l = qw(serial); /USB/ and @l = qw(hid mousedev usbmouse); } foreach (@{$mouse->{wacom}}) { /ttyS/ and push @l, qw(serial); /event/ and push @l, qw(wacom evdev); } eval { modules::load(@l) }; } sub set_xfree_conf { my ($mouse, $xfree_conf, $b_keep_auxmouse_unchanged) = @_; my @mice = map { { Protocol => $_->{XMOUSETYPE}, Device => "/dev/mouse", if_($_->{nbuttons} > 3, ZAxisMapping => [ $_->{nbuttons} > 5 ? '6 7' : '4 5' ]), if_($_->{nbuttons} < 3, Emulate3Buttons => undef, Emulate3Timeout => 50), if_($_->{EMULATEWHEEL}, Emulate3Buttons => undef, Emulate3Timeout => 50, EmulateWheel => undef, EmulateWheelButton => 2), }; } ($mouse, if_($mouse->{auxmouse}, $mouse->{auxmouse})); if (!$mouse->{auxmouse} && $b_keep_auxmouse_unchanged) { my (undef, @l) = $xfree_conf->get_mice; push @mice, @l; } $xfree_conf->set_mice(@mice); if (my @wacoms = @{$mouse->{wacom} || []}) { $xfree_conf->set_wacoms(map { { Device => "/dev/$_", USB => m|input/event| } } @wacoms); $xfree_conf->{xfree3}->add_load_module('xf86Wacom.so') if $xfree_conf->{xfree3}; } } sub various_xfree_conf { my ($in, $mouse) = @_; { my $f = "$::prefix/etc/X11/xinit.d/mouse_buttons"; if ($mouse->{nbuttons} <= 5) { unlink($f); } else { output_with_perm($f, 0755, "xmodmap -e 'pointer = 1 2 3 6 7 4 5'\n"); } } { my $f = "$::prefix/etc/X11/xinit.d/auxmouse_buttons"; if (!$mouse->{auxmouse} || $mouse->{auxmouse}{nbuttons} <= 5) { unlink($f); } else { $in->do_pkgs->install('xinput'); output_with_perm($f, 0755, "xinput set-button-map Mouse2 1 2 3 6 7 4 5\n"); } } } #- write_conf : write the mouse infos into the Xconfig files. #- input : #- $mouse : the hashtable containing the informations #- $mouse input #- $mouse->{nbuttons} : number of buttons : integer #- $mouse->{device} : device of the mouse : string : ex 'psaux' #- $mouse->{XMOUSETYPE} : type of the mouse for gpm : string : ex 'PS/2' #- $mouse->{type} : type (generic ?) of the mouse : string : ex 'PS/2' #- $mouse->{name} : name of the mouse : string : ex 'Standard' #- $mouse->{MOUSETYPE} : type of the mouse : string : ex "ps/2" #- $mouse->{XEMU3} : emulate 3rd button : string : 'yes' or 'no' sub write_conf { my ($in, $mouse, $b_keep_auxmouse_unchanged) = @_; &write($in, $mouse); modules::write_conf() if $mouse->{device} eq "usbmouse" && !$::testing; require Xconfig::xfree; my $xfree_conf = Xconfig::xfree->read; set_xfree_conf($mouse, $xfree_conf, $b_keep_auxmouse_unchanged); $xfree_conf->write; } sub change_mouse_live { my ($mouse, $old) = @_; my $xId = xmouse2xId($mouse->{XMOUSETYPE}); $old->{device} ne $mouse->{device} || $xId != xmouse2xId($old->{XMOUSETYPE}) or return; log::l("telling X server to use another mouse ($mouse->{XMOUSETYPE}, $xId)"); eval { modules::load('serial') } if $mouse->{device} =~ /ttyS/; if (!$::testing) { devices::make($mouse->{device}); symlinkf($mouse->{device}, "/dev/mouse"); eval { require xf86misc::main; xf86misc::main::setMouseLive($ENV{DISPLAY}, $xId, $mouse->{nbuttons} < 3); }; } 1; } sub test_mouse_install { my ($mouse, $x_protocol_changed) = @_; require ugtk2; ugtk2->import(qw(:wrappers :create)); my $w = ugtk2->new('', disallow_big_help => 1); my $darea = Gtk2::DrawingArea->new; $darea->set_events([ 'button_press_mask', 'button_release_mask' ]); #$darea must be unrealized. gtkadd($w->{window}, gtkpack(my $vbox_grab = Gtk2::VBox->new(0, 0), $darea, gtkset_sensitive(create_okcancel($w, undef, undef, 'edge'), 1) ), ); test_mouse($mouse, $darea, $x_protocol_changed); $w->sync; # HACK Gtk2::Gdk->pointer_grab($vbox_grab->window, 1, 'pointer_motion_mask', $vbox_grab->window, undef, 0); my $r = $w->main; Gtk2::Gdk->pointer_ungrab(0); $r; } sub test_mouse_standalone { my ($mouse, $hbox) = @_; require ugtk2; ugtk2->import(qw(:wrappers)); my $darea = Gtk2::DrawingArea->new; $darea->set_events([ 'button_press_mask', 'button_release_mask' ]); #$darea must be unrealized. gtkpack($hbox, gtkpack(gtkset_border_width(Gtk2::VBox->new(0, 10), 10), $darea)); test_mouse($mouse, $darea); } sub test_mouse { my ($mouse, $darea, $b_x_protocol_changed) = @_; require ugtk2; ugtk2->import(qw(:wrappers)); my $suffix = $mouse->{nbuttons} <= 2 ? '2b' : $mouse->{nbuttons} == 3 ? '3b' : '3b+'; my %offsets = (mouse_2b_right => [ 93, 0 ], mouse_3b_right => [ 117, 0 ], mouse_2b_middle => [ 82, 80 ], mouse_3b_middle => [ 68, 0 ], 'mouse_3b+_middle' => [ 85, 67 ]); my %image_files = ( mouse => "mouse_$suffix", left => 'mouse_' . ($suffix eq '3b+' ? '3b' : $suffix) . '_left', right => 'mouse_' . ($suffix eq '3b+' ? '3b' : $suffix) . '_right', if_($mouse->{nbuttons} > 2, middle => 'mouse_' . $suffix . '_middle'), up => 'arrow_up', down => 'arrow_down'); my %images = map { $_ => ugtk2::gtkcreate_pixbuf("$image_files{$_}.png") } keys %image_files; my $width = $images{mouse}->get_width; my $height = round_up(min($images{mouse}->get_height, $::windowheight - 150), 6); my $draw_text = sub { my ($t, $y) = @_; my $layout = $darea->create_pango_layout($t); my ($w) = $layout->get_pixel_size; $darea->window->draw_layout($darea->style->black_gc, ($darea->allocation->width-$w)/2, ($darea->allocation->height-$height)/2 + $y, $layout); }; my $draw_pixbuf = sub { my ($p, $x, $y, $w, $h) = @_; $w = $p->get_width; $h = $p->get_height; $p->render_to_drawable($darea->window, $darea->style->bg_gc('normal'), 0, 0, ($darea->allocation->width-$width)/2 + $x, ($darea->allocation->height-$height)/2 + $y, $w, $h, 'none', 0, 0); }; my $draw_by_name = sub { my ($name) = @_; my $file = $image_files{$name}; my ($x, $y) = @{$offsets{$file} || [ 0, 0 ]}; $draw_pixbuf->($images{$name}, $x, $y); }; my $drawarea = sub { $draw_by_name->('mouse'); if ($::isInstall || 1) { $draw_text->(N("Please test the mouse"), 200); if ($b_x_protocol_changed && $mouse->{nbuttons} > 3 && $mouse->{device} eq 'psaux' && member($mouse->{XMOUSETYPE}, 'IMPS/2', 'ExplorerPS/2')) { $draw_text->(N("To activate the mouse,"), 240); $draw_text->(N("MOVE YOUR WHEEL!"), 260); } } }; my $timeout; my $paintButton = sub { my ($nb) = @_; $timeout or $drawarea->(); if ($nb == 0) { $draw_by_name->('left'); } elsif ($nb == 2) { $draw_by_name->('right'); } elsif ($nb == 1) { if ($mouse->{nbuttons} >= 3) { $draw_by_name->('middle'); } else { my ($x, $y) = @{$offsets{mouse_2b_middle}}; $darea->window->draw_arc($darea->style->black_gc, 1, ($darea->allocation->width-$width)/2 + $x, ($darea->allocation->height-$height)/2 + $y, 20, 25, 0, 360 * 64); } } elsif ($mouse->{nbuttons} > 3) { my ($x, $y) = @{$offsets{$image_files{middle}}}; if ($nb == 3) { $draw_pixbuf->($images{up}, $x+6, $y-10); } elsif ($nb == 4) { $draw_pixbuf->($images{down}, $x+6, $y + $images{middle}->get_height + 2); } $draw_by_name->('middle'); $timeout and Glib::Source->remove($timeout); $timeout = Glib::Timeout->add(100, sub { $drawarea->(); $timeout = 0; 0 }); } }; $darea->signal_connect(button_press_event => sub { $paintButton->($_[1]->button - 1) }); $darea->signal_connect(scroll_event => sub { $paintButton->($_[1]->direction eq 'up' ? 3 : 4) }); $darea->signal_connect(button_release_event => $drawarea); $darea->signal_connect(expose_event => $drawarea); $darea->set_size_request($width, $height); } =begin =head1 NAME mouse - Perl functions to handle mice =head1 SYNOPSYS require modules; require mouse; modules::mergein_conf('/etc/modules.conf') if -r '/etc/modules.conf'; &mouse::detect(); =head1 DESCRIPTION C is a perl module used by mousedrake to detect and configure the mouse. =head1 COPYRIGHT Copyright (C) 2000-2002 MandrakeSoft This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. =cut