package modules; # $Id$ use strict; use vars qw(%drivers); use common; use detect_devices; use run_program; use log; my %conf; my %deps = (); my @drivers_by_category = ( [ 'net', { if_(arch() =~ /ppc/, "mace" => "Apple PowerMac Ethernet", "bmac" => "Apple G3 Ethernet", "gmac" => "Apple G4/iBook Ethernet", ), if_(arch() =~ /^sparc/, "myri_sbus" => "MyriCOM Gigabit Ethernet", "sunbmac" => "Sun BigMac Ethernet", "sunhme" => "Sun Happy Meal Ethernet", "sunqe" => "Sun Quad Ethernet", ), if_(arch() !~ /alpha/ && arch() !~ /sparc/, "3c501" => "3com 3c501", "3c503" => "3com 3c503", "3c505" => "3com 3c505", "3c507" => "3com 3c507", "3c509" => "3com 3c509", "3c515" => "3com 3c515", "3c90x" => "3Com 3c90x (Cyclone/Hurricane/Tornado)", "3c90x" => "3Com 3c90x (Cyclone/Hurricane/Tornado)", "82596" => "Apricot 82596", "abyss" => "Smart 16/4 PCI Ringnode (token ring)", "ac3200" => "Ansel Communication AC3200", "acenic" => "AceNIC Gigabit Ethernet", "aironet4500_card" => "aironet4500_card", "at1700" => "Allied Telesis AT1700", "atp" => "ATP", "catc" => "CATC EL1210A NetMate USB Ethernet driver", "com20020-pci" => "com20020-pci", "cs89x0" => "CS89x0", "de600" => "D-Link DE-600 pocket adapter", "de620" => "D-Link DE-620 pocket adapter", "defxx" => "DEC DEFPA FDDI", # most unused "depca" => "Digital DEPCA and EtherWORKS", "dgrs" => "Digi International RightSwitch", "dmfe" => "dmfe", "e100" => "Intel Ethernet Pro 100", #- newer Intel version of eepro100 "e1000" => "Intel Gigabit Ethernet", "e2100" => "Cabletron E2100", "eepro" => "Intel EtherExpress Pro", "eepro100" => "Intel EtherExpress Pro 100", #- should run on sparc but no memory on floppy "eexpress" => "Intel EtherExpress", "epic100" => "SMC 83c170 EPIC/100", "eth16i" => "ICL EtherTeam 16i", "ewrk3" => "Digital EtherWORKS 3", "hamachi" => "Packet Engines Inc.|PCI Ethernet Adapter", "hp" => "HP LAN/AnyLan", "hp-plus" => "HP PCLAN/plus", "hp100" => "HP10/100VG any LAN ", "ibmtr" => "Token Ring Tropic", "kaweth" => "kaweth", # requires scsi_mod??? "iph5526" => "iph5526", "lance" => "Lance", "natsemi" => "National Semiconductor 10/100", "ne" => "NE1000, NE2000, and clones", "ne2k-pci" => "NE2000 PCI clones", "ni5010" => "NI 5010", "ni52" => "NI 5210", "ni65" => "NI 6510", "old_tulip" => "Digital 21040/21041/21140 (old Tulip driver)", "olympic" => "IBM|16/4 Token ring UTP/STP controller", "pcnet32" => "AMD PC/Net 32", "pegasus" => "pegasus", "plip" => "PLIP (parallel port)", "rcpci" => "Red Creek Hardware VPN", "rrunner" => "Roadrunner serial HIPPI", # mostly unused "sb1000" => "sb1000", "sis900" => "sis900", "sk98lin" => "Syskonnect (Schneider & Koch)|Gigabit Ethernet", "sktr" => "Syskonnect Token ring adaptor", "smc-ultra" => "SMC Ultra", "smc9194" => "SMC 9000 series", "starfire" => "Adaptec|ANA620xx/ANA69011A Fast Ethernet", "tlan" => "Compaq Netelligent, Olicom OC-2xxx", "tmspci" => "3Com Token Link Velocity, Compaq IPG-Austin Token Ring", "tulip" => "Digital 21040/21041/21140 (Tulip)", "via-rhine" => "VIA VT86c100A Rhine-II, 3043 Rhine-I", # "wavelan" => "AT&T WaveLAN & DEC RoamAbout DS", # TODO is a "AT&T GIS WaveLAN ISA" ? "wd" => "WD8003, WD8013 and compatible", "winbond-840" => "Compex RL100-ATX", "yellowfin" => "Symbios Yellowfin G-NIC", #******(missing-2.4) "smc-ultra32" => "SMC Ultra 32", #******(missing-2.4) "rl100a" => "rl100a", #******(missing-2.4) "z85230" => "Z85x30", ), "3c59x" => "3com Vortex/Boomerang/Hurricane/Cyclone/Etherlink", "8139too" => "Realtek RTL-8139", "de4x5" => "Digital 425,434,435,450,500", "rtl8139" => "RealTek RTL8129/8139", "sundance" => "sundance", }], [ 'net_raw', { "8390" => "8390", "af_packet" => "packet socket", "nfs" => "Network File System (nfs)", "lockd" => "lockd", "parport" => "parport", "parport_pc" => "parport_pc", "sunrpc" => "sunrpc", "pci-scan" => "pci-scan", "ppp" => "Point to Point driver", "ppp_generic" => "Point to Point generic driver", "ppp_async" => "ppp_async", "slhc" => "slhc", }], [ 'usbnet', { "pegasus" => "pegasus", "kaweth" => "kaweth", "usbnet" => "usbnet", "catc" => "CATC EL1210A NetMate USB Ethernet driver", "CDCEther" => "CDCEther", }], [ 'isdn', { "hisax" => "hisax", "hysdn" => "hysdn", "b1pci" => "b1pci", "t1pci" => "t1pci", "c4" => "c4", }], [ 'tv', { "bttv" => "Brooktree Corporation|Bt8xx Video Capture", "cpia_usb" => '', "ibmcam" => '', "mod_quickcam" => '', "ov511" => '', "ultracam" => '', "usbvideo" => '', }], [ 'scanner', { "scanner" => '', "microtek" => '', }], [ 'photo', { "dc2xx" => '', "mdc800" => '', }], [ 'joystick', { "ns558" => "Creative Labs SB Live! joystick", }], [ 'radio', { "radio-maxiradio" => "radio-maxiradio", }], [ 'scsi', { if_(arch() =~ /ppc/, "mesh" => "Apple Internal SCSI", "mac53c94" => "Apple External SCSI", ), if_(arch() =~ /^sparc/, "qlogicpti" => "Performance Technologies ISP", ), if_(arch() !~ /alpha/ && arch() !~ /sparc/, "3w-xxxx" => "3ware ATA-RAID", "53c7,8xx" => "NCR 53c7xx", "AM53C974" => "AMD SCSI", "BusLogic" => "BusLogic Adapters", "NCR53c406a" => "NCR 53c406a", "a100u2w" => "a100u2w", "advansys" => "AdvanSys Adapters", "aha152x" => "Adaptec 152x", "aha1542" => "Adaptec 1542", "aha1740" => "Adaptec 1740", "atp870u" => "atp870u (Acard/Artop)", "dc395x_trm" => "dc395x_trm", "dtc" => "DTC 3180/3280", "fdomain" => "Future Domain TMC-16x0", "g_NCR5380" => "NCR 5380", "in2000" => "Always IN2000", "initio" => "Initio", "pci2220i" => "Perceptive Solutions 2240I", "psi240i" => "psi240i", "qla1280" => "Q Logic QLA1280", "qla2x00" => "Q Logic QLA2200", "qlogicfas" => "Qlogic FAS", "qlogicfc" => "qlogicfc", "seagate" => "Seagate ST01/02", "sim710" => "NCR53c710", "sym53c416" => "sym53c416", "t128" => "Trantor T128/T128F/T228", "tmscsim" => "tmscsim", "u14-34f" => "UltraStor 14F/34F", "ultrastor" => "UltraStor 14F/24F/34F", "wd7000" => "Western Digital wd7000", ), "aic7xxx" => "Adaptec 2740, 2840, 2940", "ncr53c8xx" => "NCR 53C8xx PCI", "pci2000" => "Perceptive Solutions PCI-2000", # TODO "qlogicisp" => "Qlogic ISP", "sym53c8xx" => "Symbios 53c8xx", }], [ 'scsi_raw', { "scsi_mod" => "SCSI subsystem support", "sd_mod" => "Disk SCSI support", #- "ide-mod" => "ide-mod", #- "ide-probe" => "ide-probe", #- "ide-probe-mod" => "ide-probe-mod", }], [ 'disk', { if_(arch() =~ /^sparc/, "pluto" => "Sun SparcSTORAGE Array SCSI", #- name it "fc4:soc:pluto" ? ), if_(arch() !~ /alpha/ && arch() !~ /sparc/, "DAC960" => "Mylex DAC960", "dpt_i2o" => "Distributed Tech SmartCache/Raid I-V Controller", "megaraid" => "AMI MegaRAID", "aacraid" => "AACxxx Raid Controller", "ataraid" => "", "cciss" => "Compaq Smart Array 5300 Controller", "cpqarray" => "Compaq Smart-2/P RAID Controller", "gdth" => "ICP Disk Array Controller", "i2o_block" => "Intel Integrated RAID", "ips" => "IBM ServeRAID controller", "eata" => "EATA SCSI PM2x24/PM3224", "eata_pio" => "EATA PIO Adapters", "eata_dma" => "EATA DMA Adapters", "ppa" => "Iomega PPA3 (parallel port Zip)", "imm" => "Iomega Zip (new driver, for post 31/Aug/1998 drives)", ), }], [ 'disk_raw', { #- "ide-disk" => "IDE disk", }], [ 'cdrom', { if_(arch() !~ /alpha/ && arch() !~ /sparc/, #******(missing-2.4) "sbpcd" => "SoundBlaster/Panasonic", #******(missing-2.4) "aztcd" => "Aztech CD", #******(missing-2.4) "gscd" => "Goldstar R420", #******(missing-2.4) "isp16" => "ISP16/MAD16/Mozart", #******(missing-2.4) "mcd" => "Mitsumi", #- removed for space #******(missing-2.4) "mcdx" => "Mitsumi (alternate)", #******(missing-2.4) "optcd" => "Optics Storage 8000", #******(missing-2.4) "cm206" => "Phillips CM206/CM260", #******(missing-2.4) "sjcd" => "Sanyo", #******(missing-2.4) "cdu31a" => "Sony CDU-31A", #******(missing-2.4) "sonycd535" => "Sony CDU-5xx", ), }], [ 'cdrom_raw', { "isofs" => "iso9660", "ide-cd" => "ide-cd", "sr_mod" => "SCSI CDROM support", "cdrom" => "cdrom", }], [ 'sound', { if_(arch() =~ /ppc/, "dmasound_awacs" => "Amiga or PowerMac DMA sound", ), if_(arch() !~ /^sparc/, "cmpci" => "C-Media Electronics CMI8338A CMI8338B CMI8738", "cs46xx" => "Cirrus Logic CrystalClear SoundFusion (cs46xx)", "cs4281" => "Cirrus Logic|Crystal CS4281 PCI Audio", "es1370" => "Ensoniq ES1370 [AudioPCI]", "es1371" => "Ensoniq ES1371 [AudioPCI-97]", "esssolo1" => "ESS Technology ES1969 Solo-1 Audiodrive", "i810_audio" => "i810 integrated sound card", "maestro" => "ESS Maestro 1/2", "maestro3" => "ESS Maestro-3", "nm256" => "Neomagic MagicMedia 256AV", "pas16" => "Pro Audio Spectrum/Studio 16", "trident" => "M5451 PCI South Bridge Audio", "via82cxxx" => "VIA VT82C686_5", "via82cxxx_audio" => "VIA Technologies|VT82C686 [Apollo Super AC97/Audio]", "sonicvibes" => "S3 SonicVibes", "snd-card-ice1712" => "IC Ensemble Inc|ICE1712 [Envy24]", "emu10k1" => "Creative Labs|SB Live! (audio)", "ymfpci" => "Yamaha YMF-740, DS-1", # "au8820" => "Aureal Semiconductor|Vortex 1", # "au8830" => "Aureal Semiconductor|Vortex 2", "snd-card-cmipci" => "CMI", "snd-card-cs461x" => "Cirrus Logic|CS 4610/11 [CrystalClear SoundFusion Audio Accelerator]", "snd-card-ens1371" => "Ensoniq/Creative Labs ES1371", "snd-card-es1938" => "ESS Technology|ES1969 Solo-1 Audiodrive", "snd-card-fm801" => "Fortemedia, Inc|Xwave QS3000A [FM801]<>Fortemedia, Inc|FM801 PCI Audio", "snd-card-intel8x0" => "Intel Corporation|82440MX AC'97 Audio Controller<>Intel Corporation", "snd-card-rme96" => "Xilinx, Inc.|RME Digi96<>Xilinx, Inc.", "snd-card-trident" => "Silicon Integrated Systems [SiS]|7018 PCI Audio", "snd-card-via686a" => "VIA Technologies|VT82C686 [Apollo Super AC97/Audio]", "snd-card-ymfpci" => "Yamaha Corporation|YMF-740", ), }], [ 'pcmcia', { if_(arch() !~ /^sparc/, "ide_cs" => "ide_cs", "fmvj18x_cs" => "fmvj18x_cs", "fdomain_cs" => "fdomain_cs", "netwave_cs" => "netwave_cs", "serial_cs" => "serial_cs", "wavelan_cs" => "wavelan_cs", "pcnet_cs" => "pcnet_cs", "axnet_cs" => "axnet_cs", "aha152x_cs" => "aha152x_cs", "xirc2ps_cs" => "xirc2ps_cs", "3c574_cs" => "3c574_cs", "qlogic_cs" => "qlogic_cs", "nmclan_cs" => "nmclan_cs", "ibmtr_cs" => "ibmtr_cs", # "dummy_cs" => "dummy_cs", # "memory_cs" => "memory_cs", "ftl_cs" => "ftl_cs", "smc91c92_cs" => "smc91c92_cs", "3c589_cs" => "3c589_cs", #******(missing-2.4) "parport_cs" => "parport_cs", "3c575_cb" => "3c575_cb", "apa1480_cb" => "apa1480_cb", "cb_enabler" => "cb_enabler", "epic_cb" => "epic_cb", "iflash2+_mtd" => "iflash2+_mtd", "iflash2_mtd" => "iflash2_mtd", # "memory_cb" => "memory_cb", "serial_cb" => "serial_cb", # "sram_mtd" => "sram_mtd", "tulip_cb" => "tulip_cb", ), }], [ 'pcmcia_everywhere', { if_(arch() !~ /^sparc/, "pcmcia_core" => "PCMCIA core support", "tcic" => "PCMCIA tcic controller", "ds" => "PCMCIA card support", "i82365" => "PCMCIA i82365 controller", ), }], [ 'paride', { if_(arch() !~ /^sparc/, "aten" => "ATEN EH-100", "bpck" => "Microsolutions backpack", "comm" => "DataStor (older type) commuter adapter", "dstr" => "DataStor EP-2000", "epat" => "Shuttle EPAT", "epia" => "Shuttle EPIA", "fit2" => "Fidelity Intl. (older type)", "fit3" => "Fidelity Intl. TD-3000", "frpw" => "Freecom Power", "friq" => "Freecom IQ (ASIC-2)", "kbic" => "KingByte KBIC-951A and KBIC-971A", "ktti" => "KT Tech. PHd", "on20" => "OnSpec 90c20", "on26" => "OnSpec 90c26", "pd" => "Parallel port IDE disks", "pcd" => "Parallel port CD-ROM", "pf" => "Parallel port ATAPI disk", "paride" => "Main parallel port module", ), }], [ 'raid', { "linear" => "linear", "raid0" => "raid0", "raid1" => "raid1", "raid5" => "raid5", }], [ 'mouse', { if_(arch() !~ /^sparc/, "busmouse" => "busmouse", "msbusmouse" => "msbusmouse", "serial" => "serial", "qpmouse" => "qpmouse", "atixlmouse" => "atixlmouse", ), }], [ 'usb', { "usbcore" => "usbcore", "usb-uhci" => "USB Controller (uhci)", "usb-ohci" => "USB Controller (ohci)", "usb-ohci-hcd" => "USB (ohci-hcd)", }], [ 'fs', { "smbfs" => "Windows SMB", "fat" => "fat", "romfs" => "romfs", "vfat" => "vfat", }], [ 'other', { "agpgart" => "agpgart", "buz" => "Zoran Corporation|ZR36057PQC Video cutting chipset", "defxx" => "DEC|DEFPA", "i810_rng" => "i810_rng", "ide-floppy" => "ide-floppy", "ide-scsi" => "ide-scsi", "ide-tape" => "ide-tape", "loop" => "Loopback device", "lp" => "Parallel Printer", "nbd" => "nbd", "rrunner" => "Essential Communications|Roadrunner serial HIPPI", "sg" => "sg", "st" => "st", }], ); my %type_aliases = ( scsi => 'disk', ); my @skip_big_modules_on_stage1 = ( # dgrs e1000 qw( olympic sk98lin acenic 3c90x aironet4500_card com20020-pci hamachi starfire winbond-840 dc395x_trm BusLogic seagate fdomain g_NCR5380 ) ); #******(missing-2.4) dpt_i2o aztcd gscd isp16 mcd mcdx optcd cm206 sjcd cdu31a my @skip_modules_on_stage1 = ( qw(sktr tmspci ibmtr abyss), # alt token ring qw(old_tulip rtl8139), # doesn't exist in 2.4 if_(arch() =~ /alpha|ppc/, qw(sb1000)), "apa1480_cb", "imm", "ppa", "parport", "parport_pc", "plip", qw(3w-xxxx pci2220i qla2x00 i2o_block), qw(eata eata_pio eata_dma), 'AM53C974', # deprecated by tmscsim qw(ac3200 at1700 atp ni5010 ni52 ni65), #- unused from Jeff "u14-34f", #- duplicate from ultrastor.o ); my @drivers_fields = qw(text type); %drivers = (); foreach (@drivers_by_category) { my ($type, $l) = @$_; foreach (keys %$l) { $drivers{$_} = [ $l->{$_}, $type ]; } } while (my ($k, $v) = each %drivers) { my %l; @l{@drivers_fields} = @$v; $drivers{$k} = \%l; } sub module_of_type__4update_kernel { my ($type) = @_; $type = join "|", map { $_, $_ . "_raw" } split ' ', $type; my %skip; @skip{@skip_modules_on_stage1} = (); @skip{@skip_big_modules_on_stage1} = () if $type !~ /big/; "big" =~ /^($type)$/ ? @skip_big_modules_on_stage1 : (), grep { !exists $skip{$_} } grep { $drivers{$_}{type} =~ /^($type)$/ } keys %drivers; } sub module_of_type { my ($type) = @_; my $alias = $type_aliases{$type} || $type; grep { $drivers{$_}{type} =~ /^(($type)|$alias)$/ } keys %drivers; } sub module2text { $drivers{$_[0]}{text} or log::l("trying to get text of unknown module $_[0]"), return $_[0] } sub get_alias { my ($alias) = @_; $conf{$alias}{alias}; } sub get_options { my ($name) = @_; $conf{$name}{options}; } sub set_options { my ($name, $new_option) = @_; $conf{$name}{options} = $new_option; } sub add_alias { my ($alias, $name) = @_; $name =~ /ignore/ and return; /\Q$alias/ && $conf{$_}{alias} && $conf{$_}{alias} eq $name and return $_ foreach keys %conf; if ($alias eq 'scsi_hostadapter') { my $l = $conf{scsi_hostadapter}{probeall} ||= []; push @$l, $name; log::l("setting probeall scsi_hostadapter to @$l"); } else { log::l("adding alias $alias to $name"); $conf{$alias}{alias} ||= $name; } if ($name =~ /^snd-card-/) { $conf{$name}{above} = 'snd-pcm-oss'; } $alias; } sub remove_alias($) { my ($name) = @_; foreach (keys %conf) { $conf{$_}{alias} && $conf{$_}{alias} eq $name or next; delete $conf{$_}{alias}; return 1; } 0; } sub when_load { my ($name, $type, @options) = @_; if ($type =~ /\bscsi\b/ || $type eq $type_aliases{scsi}) { add_alias('scsi_hostadapter', $name), eval { load('sd_mod') }; } if ($type eq 'sound') { #- mainly for ppc add_alias('sound-slot-0', $name); } if ($name =~ /^snd-card-/) { load('snd-pcm-oss', 'prereq'); } $conf{$name}{options} = join " ", @options if @options; } sub load { my ($name, $type, @options) = @_; my @netdev = detect_devices::getNet() if $type eq 'net'; if ($::testing) { log::l("i try to install $name module (@options)"); } elsif ($::isStandalone || $::live) { run_program::run(-x "/sbin/modprobe.static" ? "/sbin/modprobe.static" : "/sbin/modprobe", $name, @options) or die "insmod'ing module $name failed"; } else { $conf{$name}{loaded} and return; eval { load($_, 'prereq') } foreach @{$deps{$name}}; load_raw([ $name, @options ]); } sleep 2 if $name =~ /usb-storage|mousedev/; if ($type eq 'net') { add_alias($_, $name) foreach difference2([ detect_devices::getNet() ], \@netdev); } when_load($name, $type, @options); } sub load_multi { my $f; $f = sub { map { $f->(@{$deps{$_}}), $_ } @_ }; my %l; my @l = grep { !$conf{$_}{loaded} } grep { my $o = $l{$_}; $l{$_} = 1; !$o } $f->(@_); if ($::testing) { log::l("i would install modules @l"); } elsif ($::isStandalone || $::live) { foreach (@l) { run_program::run(-x "/sbin/modprobe.static" ? "/sbin/modprobe.static" : "/sbin/modprobe", $_) } } else { load_raw(map { [ $_ ] } @l); } } sub unload { my ($m) = @_; if ($::testing) { log::l("rmmod $m"); } else { if (run_program::run("rmmod", $m)) { delete $conf{$m}{loaded}; } } } sub cz_file { "/lib/modules" . (arch() eq 'sparc64' && "64") . ".cz-" . c::kernel_version(); } sub load_raw { my @l = map { my ($i, @i) = @$_; [ $i, \@i ] } grep { $_->[0] !~ /ignore/ } @_; my $cz = cz_file(); if (!-e $cz) { unlink $_ foreach glob_("/lib/modules*.cz*"); require install_any; install_any::getAndSaveFile("Mandrake/mdkinst$cz", $cz) or die "failed to get modules $cz: $!"; } eval { require packdrake; my $packer = new packdrake($cz, quiet => 1); $packer->extract_archive("/tmp", map { "$_->[0].o" } @l); }; my @failed = grep { my $m = "/tmp/$_->[0].o"; if (-e $m && run_program::run(["/usr/bin/insmod_", "insmod"], '2>', '/dev/tty5', '-f', $m, @{$_->[1]})) { unlink $m; $conf{$_->[0]}{loaded} = 1; ''; } else { log::l("missing module $_->[0]") unless -e $m; -e $m; } } @l; die "insmod'ing module " . join(", ", map { $_->[0] } @failed) . " failed" if @failed; foreach (@l) { if ($_->[0] eq "parport_pc") { #- this is a hack to make plip go foreach (@{$_->[1]}) { /^irq=(\d+)/ and eval { output "/proc/parport/0/irq", $1 }; } } elsif ($_->[0] =~ /usb-[uo]hci/) { add_alias('usb-interface', $_->[0]); eval { require fs; fs::mount('/proc/bus/usb', '/proc/bus/usb', 'usbdevfs'); #- ensure keyboard is working, the kernel must do the job the BIOS was doing sleep 2; load_multi("usbkbd", "keybdev") if detect_devices::usbKeyboards(); } } } } sub read_already_loaded() { foreach (cat_("/proc/modules")) { my ($name) = split; $conf{$name}{loaded} = 1; when_load($name, $drivers{$name}{type}); } } sub load_deps($) { my ($file) = @_; local *F; open F, $file or log::l("error opening $file: $!"), return 0; local $_; while () { my ($f, $deps) = split ':'; push @{$deps{$f}}, split ' ', $deps; } } sub read_conf { my ($file) = @_; my %c; foreach (cat_($file)) { next if /^\s*#/; my ($type, $alias, $val) = split(/\s+/, chomp_($_), 3) or next; if ($type eq 'probeall') { $c{$alias}{$type} = [ split ' ', $val ]; } else { $c{$alias}{$type} = $val; } } #- cheating here: not handling aliases of aliases while (my ($k, $v) = each %c) { if (my $a = $v->{alias}) { local $c{$a}{alias}; add2hash($c{$a}, $v); } } #- convert old scsi_hostadapter's to new probeall while (my ($alias, $type) = each %c) { $alias =~ /^scsi_hostadapter/ && $type->{alias} or next; push @{$c{scsi_hostadapter}{probeall} ||= []}, delete $type->{alias}; } \%c; } sub mergein_conf { my ($file) = @_; my $modconfref = read_conf($file); while (my ($key, $value) = each %$modconfref) { $conf{$key}{alias} = $value->{alias} if !exists $conf{$key}{alias}; push @{$conf{$key}{probeall} ||= []}, deref($value->{probeall}); } } sub write_conf { my ($prefix) = @_; my $file = "$prefix/etc/modules.conf"; rename "$prefix/etc/conf.modules", $file; #- make the switch to new name if needed #- Substitute new aliases in modules.conf (if config has changed) substInFile { my ($type,$alias,$module) = split(/\s+/, chomp_($_), 3); if ($type eq 'post-install' && $alias eq 'supermount') { #- remove the post-install supermount stuff. $_ = ''; } elsif ($type eq 'alias' && $alias =~ /scsi_hostadapter/) { #- remove old alias scsi_hostadapter's which are replaced by probeall $_ = ''; } elsif ($type ne "loaded" && $conf{$alias}{$type} && $conf{$alias}{$type} ne $module) { my $v = join(' ', uniq(deref($conf{$alias}{$type}))); $_ = "$type $alias $v\n"; } } $file; my $written = read_conf($file); local *F; open F, ">> $file" or die("cannot write module config file $file: $!\n"); while (my ($mod, $h) = each %conf) { while (my ($type, $v) = each %$h) { my $v2 = join(' ', uniq(deref($v))); print F "$type $mod $v2\n" if $v2 && $type ne "loaded" && !$written->{$mod}{$type}; } } my @l = (); push @l, 'scsi_hostadapter' if !is_empty_array_ref($conf{scsi_hostadapter}{probeall}); push @l, 'ide-floppy' if detect_devices::ide_zips(); push @l, 'bttv' if grep { $_->{driver} eq 'bttv' } detect_devices::probeall(); my $l = join '|', map { '^\s*'.$_.'\s*$' } @l; log::l("to put in modules ", join(", ", @l)); substInFile { $_ = '' if $l && /$l/; $_ .= join '', map { "$_\n" } @l if eof; } "$prefix/etc/modules"; } sub read_stage1_conf { mergein_conf($_[0]); if (arch() =~ /sparc/) { } elsif (arch() =~ /ppc/) { $conf{pcmcia_core}{"pre-install"} ||= "CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start"; } else { $conf{pcmcia_core}{"pre-install"} ||= "CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start"; } } sub load_thiskind { my ($type, $f) = @_; #- get_that_type returns the PCMCIA cards. It doesn't know they are already #- loaded, so: read_already_loaded(); my @try_modules = ( if_($type =~ /scsi/, if_(arch() !~ /ppc/, 'imm', 'ppa'), if_(detect_devices::usbStorage(), 'usb-storage'), ), if_(arch() =~ /ppc/, if_($type =~ /scsi/, 'mesh', 'mac53c94'), if_($type =~ /net/, 'bmac', 'gmac', 'mace'), if_($type =~ /sound/, 'dmasound_awacs'), ), ); grep { $f->($_->{description}, $_->{driver}) if $f; eval { load($_->{driver}, $type, $_->{options}) }; $_->{error} = $@; !($@ && $_->{try}); } get_that_type($type), map {; { driver => $_, description => $_, try => 1 } } @try_modules; } sub get_that_type { my ($type) = @_; grep { if ($type eq 'isdn') { my $b = $_->{driver} =~ /ISDN:([^,]*),?([^,]*),?(.*)/; if ($b) { $_->{driver} = $1; $_->{options} = $2; $_->{firmware} = $3; $_->{firmware} =~ s/firmware=//; $_->{driver} eq "hisax" and $_->{options} .= " id=HiSax"; } $b; } else { my $l = $drivers{$_->{driver}}; ($_->{type} =~ /$type/ || $l && $l->{type} =~ /$type/) && detect_devices::check($_); } } detect_devices::probeall(''); } sub load_ide { if (1) { #- add it back to support Ultra66 on ide modules. eval { load("ide-cd"); } } else { eval { load("ide-mod", 'prereq', 'options="' . detect_devices::hasUltra66() . '"'); delete $conf{"ide-mod"}{options}; load_multi(qw(ide-probe ide-probe-mod ide-disk ide-cd)); } } } sub configure_pcmcia { my ($pcic) = @_; #- try to setup pcmcia if cardmgr is not running. my $running if 0; return if $running; $running = 1; log::l("i try to configure pcmcia services"); symlink "/tmp/stage2/$_", $_ foreach "/etc/pcmcia"; eval { load("pcmcia_core"); load($pcic); load("ds"); }; #- run cardmgr in foreground while it is configuring the card. run_program::run("cardmgr-" . c::kernel_version(), "-f", "-m" ,"/modules"); sleep(3); #- make sure to be aware of loaded module by cardmgr. read_already_loaded(); } sub write_pcmcia { my ($prefix, $pcmcia) = @_; #- should be set after installing the package above otherwise the file will be renamed. setVarsInSh("$prefix/etc/sysconfig/pcmcia", { PCMCIA => bool2yesno($pcmcia), PCIC => $pcmcia, PCIC_OPTS => "", CORE_OPTS => "", }); } 1;