package modules; use vars qw(%loaded %drivers); use common qw(:common :file :system); use detect_devices; use run_program; use log; my %conf; my %loaded; #- array of loaded modules for each types (scsi/net/...) my $scsi = 0; my %deps = (); my @drivers_by_category = ( [ 'net', { arch() =~ /^sparc/ ? ( "myri_sbus" => "MyriCOM Gigabit Ethernet", "sunbmac" => "Sun BigMac Ethernet", "sunhme" => "Sun Happy Meal Ethernet", "sunqe" => "Sun Quad Ethernet", ) : ( "3c509" => "3com 3c509", "3c501" => "3com 3c501", "3c503" => "3com 3c503", "3c505" => "3com 3c505", "3c507" => "3com 3c507", "3c515" => "3com 3c515", "3c90x" => "3Com 3c90x (Cyclone/Hurricane/Tornado)", "at1700" => "Allied Telesis AT1700", "ac3200" => "Ansel Communication AC3200", "acenic" => "AceNIC Gigabit Ethernet", "pcnet32" => "AMD PC/Net 32", "82596" => "Apricot 82596", # "atp" => "ATP", # builtin the kernel "e2100" => "Cabletron E2100", "tlan" => "Compaq Netelligent", "cs89x0" => "CS89x0", "de600" => "D-Link DE-600 pocket adapter", "de620" => "D-Link DE-620 pocket adapter", "dgrs" => "Digi International RightSwitch", "depca" => "Digital DEPCA and EtherWORKS", "ewrk3" => "Digital EtherWORKS 3", "old_tulip" => "Digital 21040/21041/21140 (old Tulip driver)", "tulip" => "Digital 21040/21041/21140 (Tulip)", "eth16i" => "ICL EtherTeam 16i", "epic100" => "EPIC 100", "eexpress" => "Intel EtherExpress", "eepro" => "Intel EtherExpress Pro", "eepro100" => "Intel EtherExpress Pro 100", #- should run on sparc but no memory on floppy "hp100" => "HP10/100VG any LAN ", "hp" => "HP LAN/AnyLan", "hp-plus" => "HP PCLAN/plus", "lance" => "Lance", "lne390" => "Mylex LNE390", "ne" => "NE2000 and compatible", "ne2k-pci" => "NE2000 PCI", "ne3210" => "NE3210", "ni5010" => "NI 5010", "ni52" => "NI 5210", "ni65" => "NI 6510", "es3210" => "Racal-Interlan ES3210", "rcpci" => "Red Creek Hardware VPN", "epic100" => "SMC 83c170 EPIC/100", "sktr" => "Syskonnect Token ring adaptor", "smc9194" => "SMC 9000 series", "smc-ultra" => "SMC Ultra", "smc-ultra32" => "SMC Ultra 32", "yellowfin" => "Symbios Yellowfin G-NIC", "via-rhine" => "VIA Rhine", # "wavelan" => "AT&T WaveLAN & DEC RoamAbout DS", # TODO is a "AT&T GIS WaveLAN ISA" ? "wd" => "WD8003, WD8013 and compatible", "z85230" => "Z85x30", "dmfe" => "dmfe", "fmv18x" => "fmv18x", "ibmtr" => "Token Ring Tropic", "olympic" => "olympic", "plip" => "PLIP (parallel port)", "rl100a" => "rl100a", "sb1000" => "sb1000", "sbni" => "sbni", "sis900" => "sis900", ), "3c59x" => "3com 3c59x (Vortex)", "de4x5" => "Digital 425,434,435,450,500", "rtl8139" => "RealTek RTL8129/8139", }], [ 'network', { "8390" => "8390", "af_packet" => "packet socket", "nfs" => "Network File System (nfs)", "lockd" => "lockd", "sunrpc" => "sunrpc", }], [ 'scsi', { arch() =~ /^sparc/ ? ( "qlogicpti" => "Performance Technologies ISP", ) : ( "aha152x" => "Adaptec 152x", "aha1542" => "Adaptec 1542", "aha1740" => "Adaptec 1740", "advansys" => "AdvanSys Adapters", "in2000" => "Always IN2000", "AM53C974" => "AMD SCSI", "BusLogic" => "BusLogic Adapters", "dtc" => "DTC 3180/3280", "seagate" => "Future Domain TMC-885, TMC-950", "fdomain" => "Future Domain TMC-16x0", "initio" => "Initio", "g_NCR5380" => "NCR 5380", "NCR53c406a" => "NCR 53c406a", "53c7,8xx" => "NCR 53c7xx", "qlogicfas" => "Qlogic FAS", "seagate" => "Seagate ST01/02", "t128" => "Trantor T128/T128F/T228", "u14-34f" => "UltraStor 14F/34F", "ultrastor" => "UltraStor 14F/24F/34F", "wd7000" => "Western Digital wd7000", "a100u2w" => "a100u2w", "atp870u" => "atp870u (Acard/Artop)", "dc395x_trm" => "dc395x_trm", "psi240i" => "psi240i", "qlogicfc" => "qlogicfc", "sim710" => "sim710", "sym53c416" => "sym53c416", "tmscsim" => "tmscsim", ), "aic7xxx" => "Adaptec 2740, 2840, 2940", "ncr53c8xx" => "NCR 53C8xx PCI", # "pci2000" => "Perceptive Solutions PCI-2000", # TODO "qlogicisp" => "Qlogic ISP", "sym53c8xx" => "Symbios 53c8xx", "scsi_mod" => "scsi_mod", "sd_mod" => "sd_mod", "ide-mod" => "ide-mod", "ide-probe" => "ide-probe", }], [ 'disk', { arch() =~ /^sparc/ ? ( "pluto" => "Sun SparcSTORAGE Array SCSI", #- name it "fc4:soc:pluto" ? ) : ( "DAC960" => "Mylex DAC960", # "dpt" => "Distributed Tech SmartCache/Raid I-IV Controller", # not there anymore? "megaraid" => "AMI MegaRAID", "cpqarray" => "Compaq Smart-2/P RAID Controller", "gdth" => "ICP Disk Array Controller", "ips" => "IBM ServeRAID controller", "eata" => "EATA SCSI PM2x24/PM3224", "eata_pio" => "EATA PIO Adapters", "eata_dma" => "EATA DMA Adapters", "ppa" => "Iomega PPA3 (parallel port Zip)", "imm" => "Iomega Zip (new driver)", "ide-disk" => "IDE disk", ), }], [ 'cdrom', { arch() !~ /^sparc/ ? ( #- "sbpcd" => "SoundBlaster/Panasonic", #- removed for space "aztcd" => "Aztech CD", "gscd" => "Goldstar R420", "isp16" => "ISP16/MAD16/Mozart", #- "mcd" => "Mitsumi", #- removed for space "mcdx" => "Mitsumi (alternate)", "optcd" => "Optics Storage 8000", "cm206" => "Phillips CM206/CM260", "sjcd" => "Sanyo", "cdu31a" => "Sony CDU-31A", "sonycd535" => "Sony CDU-5xx", ) : (), "isofs" => "iso9660", "ide-cd" => "ide-cd", "sr_mod" => "SCSI CDROM support", "cdrom" => "cdrom", }], [ 'sound', { arch() !~ /^sparc/ ? ( "alsa" => "ALSA sound module, many sound cards", "cmpci" => "C-Media Electronics CMI8338A CMI8338B CMI8738", "es1370" => "Ensoniq ES1370 [AudioPCI]", "es1371" => "Ensoniq ES1371 [AudioPCI-97]", "esssolo1" => "ESS Technology ES1969 Solo-1 Audiodrive", "maestro" => "Maestro", "nm256" => "Neomagic MagicMedia 256AV", "pas16" => "Pro Audio Spectrum/Studio 16", "via82cxxx" => "VIA VT82C686_5", "sonicvibes" => "S3 SonicVibes", ) : (), }], [ 'pcmcia', { arch() !~ /^sparc/ ? ( "ide_cs" => "ide_cs", "fmvj18x_cs" => "fmvj18x_cs", "fdomain_cs" => "fdomain_cs", "netwave_cs" => "netwave_cs", "serial_cs" => "serial_cs", "wavelan_cs" => "wavelan_cs", "pcnet_cs" => "pcnet_cs", "aha152x_cs" => "aha152x_cs", "xirc2ps_cs" => "xirc2ps_cs", "3c574_cs" => "3c574_cs", "qlogic_cs" => "qlogic_cs", "nmclan_cs" => "nmclan_cs", "ibmtr_cs" => "ibmtr_cs", "dummy_cs" => "dummy_cs", "memory_cs" => "memory_cs", "ftl_cs" => "ftl_cs", "smc91c92_cs" => "smc91c92_cs", "3c589_cs" => "3c589_cs", "parport_cs" => "parport_cs", "3c575_cb" => "3c575_cb", "apa1480_cb" => "apa1480_cb", "cb_enabler" => "cb_enabler", "epic_cb" => "epic_cb", "iflash2+_mtd" => "iflash2+_mtd", "iflash2_mtd" => "iflash2_mtd", "memory_cb" => "memory_cb", "serial_cb" => "serial_cb", "sram_mtd" => "sram_mtd", "tulip_cb" => "tulip_cb", ) : (), }], [ 'pcmcia_everywhere', { arch() !~ /^sparc/ ? ( "pcmcia_core" => "PCMCIA core support", "tcic" => "PCMCIA tcic controller", "ds" => "PCMCIA card support", "i82365" => "PCMCIA i82365 controller", ) : (), }], [ 'paride', { arch() !~ /^sparc/ ? ( "aten" => "ATEN EH-100", "bpck" => "Microsolutions backpack", "comm" => "DataStor (older type) commuter adapter", "dstr" => "DataStor EP-2000", "epat" => "Shuttle EPAT", "epia" => "Shuttle EPIA", "fit2" => "Fidelity Intl. (older type)", "fit3" => "Fidelity Intl. TD-3000", "frpw" => "Freecom Power", "friq" => "Freecom IQ (ASIC-2)", "kbic" => "KingByte KBIC-951A and KBIC-971A", "ktti" => "KT Tech. PHd", "on20" => "OnSpec 90c20", "on26" => "OnSpec 90c26", "pd" => "Parallel port IDE disks", "pcd" => "Parallel port CD-ROM", "pf" => "Parallel port ATAPI disk", "paride" => "Main parallel port module", ) : (), }], [ 'raid', { "linear" => "linear", "raid0" => "raid0", "raid1" => "raid1", "raid5" => "raid5", }], [ 'mouse', { arch() !~ /^sparc/ ? ( "busmouse" => "busmouse", "msbusmouse" => "msbusmouse", "serial" => "serial", "qpmouse" => "qpmouse", "atixlmouse" => "atixlmouse", "usb-uhci", "USB (uhci)", "usb-ohci", "USB (ohci)", "usb-ohci-hcd", "USB (ohci-hcd)", ) : (), }], [ 'fs', { "smbfs" => "Windows SMB", "fat" => "fat", "msdos" => "msdos", "romfs" => "romfs", "sysv" => "sysv", "ufs" => "ufs", "umsdos" => "umsdos", "vfat" => "vfat", }], [ 'other', { "st" => "st", "sg" => "sg", "ide-scsi" => "ide-scsi", "loop" => "Loopback device", "lp" => "Parallel Printer", "ide-floppy" => "ide-floppy", "ide-tape" => "ide-tape", "nbd" => "nbd", }], ); my %type_aliases = ( scsi => 'disk', ); my @skip_modules_on_stage1 = arch() =~ /alpha/ ? qw(sb1000) : (); my @drivers_fields = qw(text type); %drivers = (); foreach (@drivers_by_category) { my @l = @$_; my $l = pop @l; foreach (keys %$l) { $drivers{$_} = [ $l->{$_}, @l ]; } } while (my ($k, $v) = each %drivers) { my %l; @l{@drivers_fields} = @$v; $drivers{$k} = \%l; } 1; sub module_of_type($) { my ($type) = @_; my %skip; @skip{@skip_modules_on_stage1} = (); grep { !exists $skip{$_} } grep { $drivers{$_}{type} =~ /^($type)$/ } keys %drivers; } sub text_of_type($) { my ($type) = @_; my $alias = $type_aliases{$type}; map { $_->{text} } grep { $_->{type} eq $type || $_->{type} eq $alias } values %drivers; } sub text2driver($) { my ($text) = @_; while (my ($k, $v) = each %drivers) { $v->{text} eq $text and return $k; } die "$text is not a valid module description"; } sub get_alias { my ($alias) = @_; $conf{$alias}{alias}; } sub get_options { my ($name) = @_; $conf{$name}{options}; } sub add_alias($$) { my ($alias, $name) = @_; /\Q$alias/ && $conf{$_}{alias} && $conf{$_}{alias} eq $name and return $_ foreach keys %conf; $alias .= $scsi++ || '' if $alias eq 'scsi_hostadapter'; log::l("adding alias $alias to $name"); $conf{$alias}{alias} ||= $name; if ($alias eq "sound" && $name =~ /^snd-card-/) { $conf{$name}{"post-install"} = "modprobe snd-pcm-oss"; } $alias; } sub remove_alias($) { my ($name) = @_; foreach (keys %conf) { $conf{$_}{alias} && $conf{$_}{alias} eq $name or next; delete $conf{$_}{alias}; return 1; } 0; } sub load { my ($name, $type, @options) = @_; if ($::testing) { log::l("i try to install $name module (@options)"); } else { $conf{$name}{loaded} and return; #- $type ||= ($drivers{$name} || { type => 'unknown'})->{type}; eval { load($_, 'prereq') } foreach @{$deps{$name}}; load_raw([ $name, @options ]); } push @{$loaded{$type}}, $name; if ($type) { add_alias('usb-interface', $name) if $type =~ /SERIAL_USB/i; add_alias('scsi_hostadapter', $name) if $type eq "scsi" || $type eq $type_aliases{scsi}; } $conf{$name}{options} = join " ", @options if @options; } sub load_multi { my $f; $f = sub { map { $f->(@{$deps{$_}}), $_ } @_ }; my %l; my @l = grep { !$conf{$_}{loaded} } grep { my $o = $l{$_}; $l{$_} = 1; !$o } $f->(@_); $::testing and log::l("i would install modules @l"), return; load_raw(map { [ $_ ] } @l); } sub unload($;$) { my ($m, $remove_alias) = @_; if ($::testing) { log::l("rmmod $m"); } else { if (run_program::run("rmmod", $m)) { delete $conf{$m}{loaded}; } } foreach (keys %loaded) { @{$loaded{$_}} = grep { $m ne $_ } @{$loaded{$_}}; } remove_alias($m) if $remove_alias; } sub load_raw { my @l = map { my ($i, @i) = @$_; [ $i, \@i ] } @_; my $cz = "/lib/modules.cz"; -e $cz or $cz .= "2"; run_program::run("extract_archive", $cz, "/tmp", map { "$_->[0].o" } @l); my @failed = grep { my $m = "/tmp/$_->[0].o"; if (-e $m && run_program::run(["insmod_", "insmod"], "-f", $m, @{$_->[1]})) { unlink $m; $conf{$_->[0]}{loaded} = 1; ''; } else { log::l("missing module $_->[0]") unless -e $m; -e $m; } } @l; #- this is a hack to make plip go foreach (@l) { $_->[0] eq "parport_pc" or next; foreach (@{$_->[1]}) { /^irq=(\d+)/ and eval { output "/proc/parport/0/irq", $1 }; } } die "insmod'ing module " . join(", ", map { $_->[0] } @failed) . " failed" if @failed; } sub read_already_loaded() { foreach (cat_("/proc/modules", "die")) { my ($name) = split; $conf{$name}{loaded} = 1; } } sub load_deps($) { my ($file) = @_; local *F; open F, $file or log::l("error opening $file: $!"), return 0; foreach () { my ($f, $deps) = split ':'; push @{$deps{$f}}, split ' ', $deps; } } sub read_conf($;$) { my ($file, $scsi) = @_; my %c; foreach (cat_($file)) { do { $c{$2}{$1} = $3; $$scsi = max($$scsi, $1 || 0) if /^\s*alias\s+scsi_hostadapter (\d*)/x && $scsi; #- space added to make perl2fcalls happy! } if /^\s*(\S+)\s+(\S+)\s+(.*?)\s*$/; } #- cheating here: not handling aliases of aliases while (my ($k, $v) = each %c) { #- $$scsi ||= $v->{scsi_hostadapter} if $scsi; if (my $a = $v->{alias}) { local $c{$a}{alias}; add2hash($c{$a}, $v); } } \%c; } sub write_conf { my ($file) = @_; #- remove the post-install supermount stuff. We may have to add some more substInFile { $_ = '' if /^post-install supermount/ } $file; my $written = read_conf($file); my %net = detect_devices::net2module(); while (my ($k, $v) = each %net) { add_alias($k, $v) } my @l = sort grep { $conf{$_}{alias} && /scsi_hostadapter/ } keys %conf; add_alias('block-major-11', 'scsi_hostadapter') if @l; push @l, "ide-floppy" if detect_devices::ide_zips(); $conf{supermount}{"post-install"} = join " ; ", map { "modprobe $_" } @l if @l; $conf{"usb-storage"}{"post-install"} = "modprobe usbkbd; modprobe keybdev" if @l; local *F; open F, ">> $file" or die("cannot write module config file $file: $!\n"); while (my ($mod, $h) = each %conf) { while (my ($type, $v2) = each %$h) { print F "$type $mod $v2\n" if $v2 && $type ne "loaded" && !$written->{$mod}{$type}; } } } sub read_stage1_conf { add2hash(\%conf, read_conf($_[0], \$scsi)); $conf{parport_lowlevel}{alias} ||= "parport_pc"; $conf{pcmcia_core}{"pre-install"} ||= "CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start"; $conf{plip}{"pre-install"} ||= "modprobe parport_pc ; echo 7 > /proc/parport/0/irq"; } sub load_thiskind($;&$) { my ($type, $f, $pcic) = @_; require pci_probing::main; my @pcidevs = pci_probing::main::probe($type); log::l("pci probe found " . scalar @pcidevs . " $type devices"); my @pcmciadevs = get_pcmcia_devices($type, $pcic); log::l("pcmcia probe found " . scalar @pcmciadevs . " $type devices"); my @devs = (@pcidevs, @pcmciadevs); load("sd_mod") if $type eq 'scsi' && @devs; my %devs; foreach (@devs) { my ($text, $mod) = @$_; pci_probing::main::check($mod) or next; $devs{$mod}++ and log::l("multiple $mod devices found"), next; log::l("found driver for $mod"); &$f($text, $mod) if $f; load($mod, $type); } if ($type eq 'scsi') { #- hey, we're allowed to pci probe :) let's do a lot of probing! #- probe for USB SCSI, make sure keyboard is allowed. if (my ($c) = grep { /usb-/ } map { $_->[1] } pci_probing::main::probe('')) { eval { load($c, "SERIAL_USB"); load("usbkbd"); load("keybdev"); load("usb-storage", $type); sleep(2); }; -d "/proc/scsi/usb" or unload("usb-storage"); } #- probe for parport SCSI. foreach ("imm", "ppa") { eval { load($_, $type) }; last if !$@; } if (my ($c) = pci_probing::main::probe('AUDIO')) { add_alias("sound", $c->[1]) if pci_probing::main::check($c->[1]); } } @{$loaded{$type} || []}; } sub pcmcia_need_config($) { return $_[0] && ! -s "/var/run/stab"; } sub get_pcmcia_devices($$) { my ($type, $pcic) = @_; my (@devs, $module, $desc); #- try to setup pcmcia if cardmgr is not running. if (pcmcia_need_config($pcic)) { log::l("i try to configure pcmcia services"); symlink("/tmp/stage2/etc/pcmcia", "/etc/pcmcia") unless -e "/etc/pcmcia"; symlink("/sbin/install", "/sbin/cardmgr") unless -x "/sbin/cardmgr"; load("pcmcia_core"); load($pcic); load("ds"); #- run cardmgr in foreground while it is configuring the card. run_program::run("cardmgr", "-f", "-m" ,"/modules"); sleep(3); #- make sure to be aware of loaded module by cardmgr. read_already_loaded(); } foreach (cat_("/var/run/stab")) { $desc = $1 if /^Socket\s+\d+:\s+(.*)/; $module = $1 if /^\d+\s+$type[^\s]*\s+([^\s]+)/; if ($desc && $module) { push @devs, [ $desc, $module ]; $desc = $module = undef; } } @devs; } sub load_ide { eval { load("ide-mod", 'prereq', 'options="' . detect_devices::hasUltra66() . '"'); delete $conf{"ide-mod"}{options}; load_multi(qw(ide-probe ide-disk ide-cd)); } }