package install_steps;

use diagnostics;
use strict;
use vars qw(@filesToSaveForUpgrade);

#-######################################################################################
#- misc imports
#-######################################################################################
use common qw(:file :system :common :functional);
use install_any qw(:all);
use partition_table qw(:types);
use detect_devices;
use modules;
use run_program;
use lang;
use raid;
use keyboard;
use log;
use fsedit;
use loopback;
use commands;
use network;
use any;
use fs;

@filesToSaveForUpgrade = qw(
/etc/ld.so.conf /etc/fstab /etc/hosts /etc/conf.modules
);


#-######################################################################################
#- OO Stuff
#-######################################################################################
sub new($$) {
    my ($type, $o) = @_;

    bless $o, ref $type || $type;
    return $o;
}

#-######################################################################################
#- In/Out Steps Functions
#-######################################################################################
sub enteringStep {
    my ($o, $step) = @_;
    log::l("starting step `$step'");
}
sub leavingStep {
    my ($o, $step) = @_;
    log::l("step `$step' finished");

    if (-d "$o->{prefix}/root") {
	eval { commands::cp('-f', "/tmp/ddebug.log", "$o->{prefix}/root") };
	install_any::g_auto_install();
    }

    for (my $s = $o->{steps}{first}; $s; $s = $o->{steps}{$s}{next}) {
	#- the reachability property must be recomputed each time to take
	#- into account failed step.
	next if $o->{steps}{$s}{done} && !$o->{steps}{$s}{redoable};

	my $reachable = 1;
	if (my $needs = $o->{steps}{$s}{needs}) {
	    my @l = ref $needs ? @$needs : $needs;
	    $reachable = min(map { $o->{steps}{$_}{done} || 0 } @l);
	}
	$o->{steps}{$s}{reachable} = 1 if $reachable;
    }
    $o->{steps}{$step}{reachable} = $o->{steps}{$step}{redoable};

    while (my $f = shift @{$o->{steps}{$step}{toBeDone} || []}) {
	eval { &$f() };
	$o->ask_warn(_("Error"), [
_("An error occurred, but I don't know how to handle it nicely.
Continue at your own risk."), $@ ]) if $@;
    }
}

sub errorInStep($$) { print "error :(\n"; c::_exit(1) }
sub kill_action {}
sub set_help { 1 }

#-######################################################################################
#- Steps Functions
#-######################################################################################
#------------------------------------------------------------------------------
sub selectLanguage {
    my ($o) = @_;
    lang::set($o->{lang}, $o->{langs});

    if ($o->{keyboard_unsafe} || !$o->{keyboard}) {
	$o->{keyboard_unsafe} = 1;
	$o->{keyboard} = keyboard::lang2keyboard($o->{lang});
	selectKeyboard($o);
    }
}
#------------------------------------------------------------------------------
sub selectKeyboard {
    my ($o) = @_;
    keyboard::setup($o->{keyboard})
}
#------------------------------------------------------------------------------
sub selectPath {}
#------------------------------------------------------------------------------
sub selectInstallClass($@) {
    my ($o) = @_;
    $o->{installClass} ||= $::corporate ? "corporate" : "normal";
    $o->{security} ||= ${{
	normal    => 2,
	developer => 3,
	corporate => 3,
	server    => 4,
    }}{$o->{installClass}};
}
#------------------------------------------------------------------------------
sub setupSCSI { 
    modules::load_ide();
    modules::load_thiskind('scsi');
}
#------------------------------------------------------------------------------
sub doPartitionDisks {
    my ($o, $hds) = @_;

    if ($o->{lnx4win}) {
	my @l = sort { $a->{device_windobe} cmp $b->{device_windobe} } 
	        grep { isFat($_) } fsedit::get_fstab(@{$o->{hds}}) or die "wow, lnx4win with no fat partitions! hard times :(";
	my $real_part = @l > 1 && $o->doPartitionDisksLnx4winDev(\@l) || $l[0];

	my $handle = loopback::inspect($real_part, '', 'rw') or die _("This partition can't be used for loopback");
	my $size = loopback::getFree($handle->{dir}, $real_part); 

	my $max_linux = 1000 << 11; $max_linux *= 10 if $::expert;
	my $min_linux =  300 << 11; $min_linux /=  3 if $::expert;
	my $min_freewin = 100 << 11; $min_freewin /= 10 if $::expert;

	my $swap = { type => 0x82, loopback_file => '/lnx4win/swapfile',     mntpoint => 'swap', size => 64 << 11, device => $real_part, notFormatted => 1 };
	my $root = { type => 0x83, loopback_file => '/lnx4win/linuxsys.img', mntpoint => '/',    size => 0, device => $real_part, notFormatted => 1 };
	$root->{size} = min($size - $swap->{size} - $min_freewin, $max_linux);
	log::l("lnx4win $root->{size} <= $min_linux (minlinux), $size (minavail) - $swap->{size} (swapsize) - $min_freewin (minfreewin), $max_linux (maxlinux)");
	$root->{size} > $min_linux or die "not enough room on that partition for lnx4win";

	$o->doPartitionDisksLnx4winSize(\$root->{size}, \$swap->{size}, $size - 2 * $swap->{size}, 2 * $swap->{size});

	unlink "$handle->{dir}$_" foreach "/lnx4win/swapfile", "/lnx4win/linuxsys.img";

	push @{$real_part->{loopback}}, $root, $swap;	
    } else {
	unless ($::testing) {
	    partition_table::write($_) foreach @$hds;
	}
    }
}
sub doPartitionDisksLnx4winDev {}
sub doPartitionDisksLnx4winSize {}

#------------------------------------------------------------------------------

sub ask_mntpoint_s {
    my ($o, $fstab) = @_;

    #- TODO: set the mntpoints

    #- assure type is at least ext2
    (fsedit::get_root($fstab) || {})->{type} = 0x83;

    my %m; foreach (@$fstab) {
	my $m = $_->{mntpoint};

	next unless $m && $m ne 'swap'; #- there may be a lot of swap.

	$m{$m} and die _("Duplicate mount point %s", $m);
	$m{$m} = 1;

	#- in case the type does not correspond, force it to ext2
	$_->{type} = 0x83 if $m =~ m|^/| && !isFat($_);
    }
}


sub rebootNeeded($) {
    my ($o) = @_;
    log::l("Rebooting...");
    c::_exit(0);
}

sub choosePartitionsToFormat($$) {
    my ($o, $fstab) = @_;

    foreach (@$fstab) {
	$_->{mntpoint} = "swap" if isSwap($_);
	$_->{mntpoint} or next;
	
	add2hash_($_, { toFormat => $_->{notFormatted} });
	if (!$_->{toFormat}) {
	    my $t = isLoopback($_) ? 
	      eval { fsedit::typeOfPart($o->{prefix} . loopback::file($_)) } :
	      fsedit::typeOfPart($_->{device});
	    $_->{toFormatUnsure} = $_->{mntpoint} eq "/" ||
	      #- if detected dos/win, it's not precise enough to just compare the types (too many of them)
	      (isFat({ type => $t }) ? !isFat($_) : $t != $_->{type});
	}
    }
}

sub formatMountPartitions {
    my ($o) = @_;
    fs::formatMount_all($o->{raid}, $o->{fstab}, $o->{prefix});
}

#------------------------------------------------------------------------------
sub setPackages {
    my ($o) = @_;
    install_any::setPackages($o);
}
sub selectPackagesToUpgrade {
    my ($o) = @_;
    install_any::selectPackagesToUpgrade($o);
}

sub choosePackages {
    my ($o, $packages, $compss, $compssUsers, $compssUsersSorted, $first_time) = @_;

    #- now for upgrade, package that must be upgraded are
    #- selected first, after is used the same scheme as install.

    #- make sure we kept some space left for available else the system may
    #- not be able to start (xfs at least).
    my $available = install_any::getAvailableSpace($o);
    my $availableCorrected = pkgs::invCorrectSize($available / sqr(1024)) * sqr(1024);
    log::l("available size $available (corrected $availableCorrected)");

    foreach (values %{$packages->[0]}) {
	pkgs::packageSetFlagSkip($_, 0);
	pkgs::packageSetFlagUnskip($_, 0);
    }
    pkgs::unselectAllPackages($packages);
    pkgs::selectPackage($o->{packages}, pkgs::packageByName($o->{packages}, $_) || next) foreach @{$o->{default_packages}};

    add2hash_($o, { compssListLevel => $::expert ? 90 : 80 }) unless $::auto_install;
    pkgs::setSelectedFromCompssList($o->{compssListLevels}, $packages, $o->{compssListLevel}, $available, $o->{installClass}) if exists $o->{compssListLevel};
    $available;
}

sub beforeInstallPackages {
    my ($o) = @_;

    #- save these files in case of upgrade failure.
    if ($o->{isUpgrade}) {
	foreach (@filesToSaveForUpgrade) {
	    unlink "$o->{prefix}/$_.mdkgisave";
	    if (-e "$o->{prefix}/$_") {
		eval { commands::cp("$o->{prefix}/$_", "$o->{prefix}/$_.mdkgisave") };
	    }
	}
    }

    #- some packages need such files for proper installation.
    install_any::write_ldsoconf($o->{prefix});
    fs::write($o->{prefix}, $o->{fstab}, $o->{manualFstab}, $o->{useSupermount});

    network::add2hosts("$o->{prefix}/etc/hosts", "localhost.localdomain", "127.0.0.1");

    require pkgs;
    pkgs::init_db($o->{prefix}, $o->{isUpgrade});
}

sub pkg_install {
    my ($o, @l) = @_;
    require pkgs;
    pkgs::selectPackage($o->{packages}, pkgs::packageByName($o->{packages}, $_) || die "$_ rpm not found") foreach @l;
    $o->installPackages;
}

sub installPackages($$) { #- complete REWORK, TODO and TOCHECK!
    my ($o) = @_;
    my $packages = $o->{packages};

    if (@{$o->{toRemove} || []}) {
	#- hack to ensure proper upgrade of packages from other distribution,
	#- as release number are not mandrake based. this causes save of
	#- important files and restore them after.
	foreach (@{$o->{toSave} || []}) {
	    if (-e "$o->{prefix}/$_") {
		unlink "$o->{prefix}/$_.mdkgisave"; eval { commands::cp("$o->{prefix}/$_", "$o->{prefix}/$_.mdkgisave") };
	    }
	}
	pkgs::remove($o->{prefix}, $o->{toRemove});
	foreach (@{$o->{toSave} || []}) {
	    if (-e "$o->{prefix}/$_.mdkgisave") {
		unlink "$o->{prefix}/$_"; rename "$o->{prefix}/$_.mdkgisave", "$o->{prefix}/$_";
	    }
	}
	$o->{toSave} = [];

	#- hack for compat-glibc to upgrade properly :-(
	if (pkgs::packageFlagSelected(pkgs::packageByName($packages, 'compat-glibc'))) {
	    rename "$o->{prefix}/usr/i386-glibc20-linux", "$o->{prefix}/usr/i386-glibc20-linux.mdkgisave";
	}
    }

    #- small transaction will be built based on this selection and depslist.
    my @toInstall = pkgs::packagesToInstall($packages);

    $ENV{DURING_INSTALL} = 1;
    pkgs::install($o->{prefix}, $o->{isUpgrade}, \@toInstall, $packages->[1], $packages->[2]);
    delete $ENV{DURING_INSTALL};
}

sub afterInstallPackages($) {
    my ($o) = @_;

    return if $::g_auto_install;

    -x "$o->{prefix}/usr/bin/dumpkeys" or $::testing or die 
"Some important packages didn't get installed properly.

Please switch to console 2 (using ctrl-alt-f2)
and look at the log file /tmp/ddebug.log

Consoles 1,3,4,7 may also contain interesting information";

    pkgs::done_db();

    #-  why not? cuz weather is nice today :-) [pixel]
    sync(); sync();

    $o->pcmciaConfig();

    #- for mandrake_firstime
    output "$o->{prefix}/var/lock/TMP_1ST", "";

    #- remove the nasty acon...
    run_program::rooted($o->{prefix}, "chkconfig", "--del", "acon") unless $ENV{LANGUAGE} =~ /ar/;

    #- make the mdk fonts last in available fonts for buggy kde
    run_program::rooted($o->{prefix}, "chkfontpath", "--remove", "/usr/X11R6/lib/X11/fonts/mdk");
    run_program::rooted($o->{prefix}, "chkfontpath", "--add", "/usr/X11R6/lib/X11/fonts/mdk");

    #- call update-menus at the end of package installation
    run_program::rooted($o->{prefix}, "update-menus");

    #- mainly for auto_install's
    run_program::rooted($o->{prefix}, "sh", "-c", $o->{postInstall}) if $o->{postInstall};

    #- create /etc/sysconfig/desktop file according to user choice and presence of /usr/bin/kdm or /usr/bin/gdm.
    my $f = "$o->{prefix}/etc/sysconfig/desktop";
    if ($o->{compssUsersChoice}{KDE} && -x "$o->{prefix}/usr/bin/kdm") {
	output($f, "KDE\n");
    } elsif ($o->{compssUsersChoice}{Gnome} && -x "$o->{prefix}/usr/bin/gdm") {
	output($f, "GNOME\n");
    }

    if ($o->{pcmcia}) {
	substInFile { s/.*(TaskBarShowAPMStatus).*/$1=1/ } "$o->{prefix}/usr/lib/X11/icewm/preferences";
	eval { commands::cp("$o->{prefix}/usr/share/applnk/System/kapm.kdelnk", 
			    "$o->{prefix}/etc/skel/Desktop/Autostart/kapm.kdelnk") };
    }

    my $msec = "$o->{prefix}/etc/security/msec";
    substInFile { s/^audio\n//; $_ .= "audio\n" if eof } "$msec/group.conf" if -d $msec;
    substInFile { s/^cdrom\n//; $_ .= "cdrom\n" if eof } "$msec/group.conf" if -d $msec;
    substInFile { s/^xgrp\n//; $_ .= "xgrp\n" if eof } "$msec/group.conf" if -d $msec;

    my $pkg = pkgs::packageByName($o->{packages}, 'urpmi');
    if ($pkg && pkgs::packageFlagSelected($pkg)) {
	install_any::install_urpmi($o->{prefix}, $o->{method}, $o->{packages}[2]);
	substInFile { s/^urpmi\n//; $_ .= "urpmi\n" if eof } "$msec/group.conf" if -d $msec;
    }

    #- update language and icons for KDE.
    log::l("updating language for kde");
    install_any::kdelang_postinstall($o->{prefix});
    log::l("updating kde icons according to available devices");
    install_any::kdeicons_postinstall($o->{prefix});

    my $welcome = _("Welcome to %s", "[HOSTNAME]");
    substInFile { s/^(GreetString)=.*/$1=$welcome/ } "$o->{prefix}/usr/share/config/kdmrc";
    substInFile { s/^(UserView)=false/$1=true/ } "$o->{prefix}/usr/share/config/kdmrc" if $o->{security} < 3;
    run_program::rooted($o->{prefix}, "kdeDesktopCleanup");

    #- konsole and gnome-terminal are lamers in exotic languages, link them to something better
    if ($o->{lang} =~ /ja|ko|zh/) {
	foreach ("konsole", "gnome-terminal") {
	    my $f = "$o->{prefix}/usr/bin/$_";
	    symlinkf("X11/rxvt.sh", $f) if -e $f;
	}
    }

    my $hasttf;
    my $dest = "/usr/X11R6/lib/X11/fonts/drakfont";
    foreach my $d (map { $_->{mntpoint} } grep { isFat($_) } @{$o->{fstab}}) {
	foreach my $D (map { "$d/$_" } grep { m|^win|i } all("$o->{prefix}$d")) {
	    $D .= "/fonts";
	    -d "$o->{prefix}$D" or next;
	    log::l("found win font dir $D");
	    if (!$hasttf) {
		$hasttf = $o->ask_okcancel('', 
_("Some true type fonts from windows have been found on your computer.
Do you want to use them? Be sure you have the right to use them under Linux."), 1) or goto nottf;
		mkdir "$o->{prefix}$dest", 0755;
	    }
	    /(.*)\.ttf/i and symlink "$D/$_", "$o->{prefix}$dest/$1.ttf" foreach grep { /\.ttf/i } all("$o->{prefix}$D");
	}
    }
  nottf:
    if ($hasttf) {
	run_program::rooted($o->{prefix}, "ttmkfdir", "-d", $dest, "-o", "$dest/fonts.dir");
	run_program::rooted($o->{prefix}, "chkfontpath", "--add", $dest);
    }
    foreach (install_any::list_skels()) {
	my $found;
	substInFile {
	    $found ||= /KFM Misc Defaults/;
	    $_ .= 
"[KFM Misc Defaults]
GridWidth=85
GridHeight=70
" if eof && !$found;
	} "$o->{prefix}$_/.kde/share/config/kfmrc" 
    }

    #- to ensure linuxconf doesn't cry against those files being in the future
    -e $_ and touch($_) foreach map { "$o->{prefix}/$_" } '/etc/conf.modules', '/etc/crontab', '/etc/sysconfig/mouse', '/etc/X11/fs/config';

    #- move some file after an upgrade that may be seriously annoying.
    #- and rename saved files to .mdkgiorig.
    if ($o->{isUpgrade}) {
	log::l("moving previous desktop files that have been updated to Trash of each user");
	install_any::move_desktop_file($o->{prefix});

	foreach (@filesToSaveForUpgrade) {
	    if (-e "$o->{prefix}$_.mdkgisave") {
		unlink "$o->{prefix}$_.mdkgiorig"; rename "$o->{prefix}/$_.mdkgisave", "$o->{prefix}/$_.mdkgiorig";
	    }
	}
    }
}

#------------------------------------------------------------------------------
sub selectMouse($) {
    my ($o) = @_;
}

#------------------------------------------------------------------------------
sub configureNetwork($) {
    my ($o) = @_;
    my $etc = "$o->{prefix}/etc";

    network::write_conf("$etc/sysconfig/network", $o->{netc});
    network::write_resolv_conf("$etc/resolv.conf", $o->{netc});
    network::write_interface_conf("$etc/sysconfig/network-scripts/ifcfg-$_->{DEVICE}", $_) foreach @{$o->{intf}};
    network::add2hosts("$etc/hosts", $o->{netc}{HOSTNAME}, map { $_->{IPADDR} } @{$o->{intf}});
    network::sethostname($o->{netc}) unless $::testing;
    network::addDefaultRoute($o->{netc}) unless $::testing;

    $o->pkg_install("dhcpcd") if grep { $_->{BOOTPROTO} =~ /^(dhcp)$/ } @{$o->{intf}};
    # Handle also pump (this is still in initscripts no?)
    $o->pkg_install("pump") if grep { $_->{BOOTPROTO} =~ /^(pump|bootp)$/ } @{$o->{intf}};
    #-res_init();		#- reinit the resolver so DNS changes take affect

    miscellaneousNetwork($o);
}

#------------------------------------------------------------------------------
sub pppConfig {
    my ($o) = @_;
    $o->{modem} or return;

    symlinkf($o->{modem}{device}, "$o->{prefix}/dev/modem") or log::l("creation of $o->{prefix}/dev/modem failed");
    $o->pkg_install("ppp") unless $::testing;

    my %toreplace;
    $toreplace{$_} = $o->{modem}{$_} foreach qw(connection phone login passwd auth domain dns1 dns2);
    $toreplace{kpppauth} = ${{ 'Script-based' => 0, 'PAP' => 1, 'Terminal-based' => 2, 'CHAP' => 3, }}{$o->{modem}{auth}};
    $toreplace{phone} =~ s/\D//g;
    $toreplace{dnsserver} = join ',', map { $o->{modem}{$_} } "dns1", "dns2";
    $toreplace{dnsserver} .= $toreplace{dnsserver} && ',';

    #- using peerdns or dns1,dns2 avoid writing a /etc/resolv.conf file.
    $toreplace{peerdns} = "yes";

    $toreplace{connection} ||= 'DialupConnection';
    $toreplace{domain} ||= 'localdomain';
    $toreplace{intf} ||= 'ppp0';
    $toreplace{papname} = $o->{modem}{auth} eq 'PAP' && $toreplace{login};

    #- build ifcfg-ppp0.
    my $ifcfg = "$o->{prefix}/etc/sysconfig/network-scripts/ifcfg-ppp0";
    local *IFCFG; open IFCFG, ">$ifcfg" or die "Can't open $ifcfg";
    print IFCFG <<END;
DEVICE="$toreplace{intf}"
ONBOOT="no"
USERCTL="no"
MODEMPORT="/dev/modem"
LINESPEED="115200"
PERSIST="yes"
DEFABORT="yes"
DEBUG="yes"
INITSTRING="ATZ"
DEFROUTE="yes"
HARDFLOWCTL="yes"
ESCAPECHARS="no"
PPPOPTIONS=""
PAPNAME="$toreplace{papname}"
REMIP=""
NETMASK=""
IPADDR=""
MRU=""
MTU=""
DISCONNECTTIMEOUT="5"
RETRYTIMEOUT="60"
BOOTPROTO="none"
PEERDNS="$toreplace{peerdns}"
END
    foreach (1..2) {
	if ($toreplace{"dns$_"}) {
	    print IFCFG <<END;
DNS$_=$toreplace{"dns$_"}
END
	}
    }
    close IFCFG;

    #- build chat-ppp0.
    my $chat = "$o->{prefix}/etc/sysconfig/network-scripts/chat-ppp0";
    local *CHAT; open CHAT, ">$chat" or die "Can't open $chat";
    print CHAT <<END;
'ABORT' 'BUSY'
'ABORT' 'ERROR'
'ABORT' 'NO CARRIER'
'ABORT' 'NO DIALTONE'
'ABORT' 'Invalid Login'
'ABORT' 'Login incorrect'
'' 'ATZ'
'OK' 'ATDT$toreplace{phone}'
'CONNECT' ''
END
    if ($o->{modem}{auth} eq 'Terminal-based' || $o->{modem}{auth} eq 'Script-based') {
	print CHAT <<END;
'ogin:' '$toreplace{login}'
'ord:' '$toreplace{passwd}'
END
    }
    print CHAT <<END;
'TIMEOUT' '5'
'~--' ''
END
    close CHAT;

    if ($o->{modem}{auth} eq 'PAP') {
	#- need to create a secrets file for the connection.
	my $secrets = "$o->{prefix}/etc/ppp/" . lc($o->{modem}{auth}) . "-secrets";
	my @l = cat_($secrets);
	my $replaced = 0;
	do { $replaced ||= 1
	       if s/^\s*"?$toreplace{login}"?\s+ppp0\s+(\S+)/"$toreplace{login}"  ppp0  "$toreplace{passwd}"/; } foreach @l;
	if ($replaced) {
	    local *F;
	    open F, ">$secrets" or die "Can't open $secrets: $!";
	    print F @l;
        } else {
	    local *F;
	    open F, ">>$secrets" or die "Can't open $secrets: $!";
	    print F "$toreplace{login}  ppp0  \"$toreplace{passwd}\"\n";
	}
	#- restore access right to secrets file, just in case.
	chmod 0600, $secrets;
    } #- CHAP is not supported by initscripts, need patching before doing more on that here!

    #-install_any::template2userfile($o->{prefix}, "$ENV{SHARE_PATH}/kppprc.in", ".kde/share/config/kppprc", 1, %toreplace);
    commands::mkdir_("-p", "$o->{prefix}/usr/share/config");
    template2file("$ENV{SHARE_PATH}/kppprc.in", "$o->{prefix}/usr/share/config/kppprc", %toreplace);

    miscellaneousNetwork($o);
}

#------------------------------------------------------------------------------
sub installCrypto {
    my ($o) = @_;
    my $u = $o->{crypto} or return; $u->{mirror} && $u->{packages} or return;

    $o->upNetwork;
    require crypto;
    my @crypto_packages = crypto::getPackages($o->{prefix}, $o->{packages}, $u->{mirror});

    my $oldGetFile = \&install_any::getFile;
    local *install_any::getFile = sub {
	my ($rpmfile) = @_;
	if ($rpmfile =~ /^(.*)-[^-]*-[^-]*$/ && member($1, @crypto_packages)) {
	    log::l("crypto::getFile $rpmfile");
	    crypto::getFile($rpmfile, $u->{mirror});
	} else {
	    #- use previous getFile typically if non cryptographic packages
	    #- have been selected by dependancies.
	    log::l("normal getFile $rpmfile");
	    &$oldGetFile($rpmfile);
	}
    };
    $o->pkg_install(@{$u->{packages}});
}

#------------------------------------------------------------------------------
sub pcmciaConfig($) {
    my ($o) = @_;
    my $t = $o->{pcmcia};

    #- should be set after installing the package above else the file will be renamed.
    setVarsInSh("$o->{prefix}/etc/sysconfig/pcmcia", {
	PCMCIA    => $t ? "yes" : "no",
	PCIC      => $t,
	PCIC_OPTS => "",
        CORE_OPTS => "",
    });
}

#------------------------------------------------------------------------------
sub timeConfig {
    my ($o, $f) = @_;
    require timezone;
    timezone::write($o->{prefix}, $o->{timezone}, $f);
}

#------------------------------------------------------------------------------
sub servicesConfig {}
#------------------------------------------------------------------------------
sub printerConfig {
    my($o) = @_;
    if ($o->{printer}{configured}) {
	require pkgs;
	pkgs::selectPackage($o->{packages}, pkgs::packageByName($o->{packages}, 'rhs-printfilters'));
	$o->installPackages($o->{packages});

	require printer;
	foreach (keys %{$o->{printer}{configured} || {}}) {
	    log::l("configuring printer queue $_->{queue}");
	    printer::copy_printer_params($_, $o->{printer});
	    #- setup all configured queues, which is not the case interactively where
	    #- only the working queue is setup on configuration.
	    printer::configure_queue($o->{printer});
	}
    }
}

#------------------------------------------------------------------------------
my @etc_pass_fields = qw(name pw uid gid realname home shell);
sub setRootPassword($) {
    my ($o) = @_;
    my $p = $o->{prefix};
    my $u = $o->{superuser} ||= {};

    $u->{pw} ||= $u->{password} && install_any::crypt($u->{password});

    my @lines = cat_(my $f = "$p/etc/passwd") or log::l("missing passwd file"), return;

    local *F;
    open F, "> $f" or die "failed to write file $f: $!\n";
    foreach (@lines) {
	if (/^root:/) {
	    chomp;
	    my %l; @l{@etc_pass_fields} = split ':';
	    add2hash($u, \%l);
	    $_ = join(':', @$u{@etc_pass_fields}) . "\n";
	}
	print F $_;
    }
}

#------------------------------------------------------------------------------

sub addUser($) {
    my ($o) = @_;
    my $p = $o->{prefix};

    my (%uids, %gids); 
    foreach (glob_("$p/home")) { my ($u, $g) = (stat($_))[4,5]; $uids{$u} = 1; $gids{$g} = 1; }

    my %done;
    my @l = grep {
	if (!$_->{name} || getpwnam($_->{name}) || $done{$_->{name}}) { 
	    0;
	} else {
	    $_->{home} ||= "/home/$_->{name}";

	    my $u = $_->{uid} || ($_->{oldu} = (stat("$p$_->{home}"))[4]);
	    my $g = $_->{gid} || ($_->{oldg} = (stat("$p$_->{home}"))[5]);
	    #- search for available uid above 501 else initscripts may fail to change language for KDE.
	    if (!$u || getpwuid($u)) { for ($u = 501; getpwuid($u) || $uids{$u}; $u++) {} }
	    if (!$g || getgrgid($g)) { for ($g = 501; getgrgid($g) || $gids{$g}; $g++) {} }

	    $_->{uid} = $u; $uids{$u} = 1;
	    $_->{gid} = $g; $gids{$g} = 1;
	    $_->{pw} ||= $_->{password} && install_any::crypt($_->{password});
	    $_->{shell} ||= "/bin/bash";
	    $done{$_->{name}} = 1;
	}
    } @{$o->{users} || []};
    my @passwd = cat_("$p/etc/passwd");;

    local *F;
    open F, ">> $p/etc/passwd" or die "can't append to passwd file: $!";
    print F join(':', @$_{@etc_pass_fields}), "\n" foreach @l;

    open F, ">> $p/etc/group" or die "can't append to group file: $!";
    print F "$_->{name}:x:$_->{gid}:\n" foreach @l;

    foreach my $u (@l) {
	if (! -d "$p$u->{home}") {
	    my $mode = $o->{security} < 2 ? 0755 : 0750;
	    eval { commands::cp("-f", "$p/etc/skel", "$p$u->{home}") };
	    if ($@) {
		log::l("copying of skel failed: $@"); mkdir("$p$u->{home}", $mode); 
	    } else {
		chmod $mode, "$p$u->{home}";
	    }
	}
	eval { commands::chown_("-r", "$u->{uid}.$u->{gid}", "$p$u->{home}") }
	    if $u->{uid} != $u->{oldu} || $u->{gid} != $u->{oldg};
    }
    require any;
    any::addUsers($o->{prefix}, @l);
}

#------------------------------------------------------------------------------
sub createBootdisk($) {
    my ($o) = @_;
    my $dev = $o->{mkbootdisk} or return;

    my @l = detect_devices::floppies();

    $dev = shift @l || die _("No floppy drive available")
      if $dev eq "1"; #- special case meaning autochoose

    return if $::testing;

    if (arch() =~ /^sparc/) {
	require silo;
        silo::mkbootdisk($o->{prefix}, install_any::kernelVersion($o), $dev, $o->{bootloader}{perImageAppend});
    } else {
	require lilo;
        lilo::mkbootdisk($o->{prefix}, install_any::kernelVersion($o), $dev, $o->{bootloader}{perImageAppend});
    }
    $o->{mkbootdisk} = $dev;
}

#------------------------------------------------------------------------------
sub readBootloaderConfigBeforeInstall {
    my ($o) = @_;
    my ($image, $v);

    if (arch() =~ /^sparc/) {
	require silo;
	add2hash($o->{bootloader} ||= {}, silo::read($o->{prefix}, "/etc/silo.conf"));
    } else {
	require lilo;
	add2hash($o->{bootloader} ||= {}, lilo::read($o->{prefix}, "/etc/lilo.conf"));
    }

    #- since kernel or kernel-smp may not be upgraded, it should be checked
    #- if there is a need to update existing lilo.conf entries by using that
    #- hash.
    my %ofpkgs = (
		  'vmlinuz'     => pkgs::packageByName($o->{packages}, 'kernel'),
		  'vmlinuz-smp' => pkgs::packageByName($o->{packages}, 'kernel-smp'),
		 );

    #- change the /boot/vmlinuz or /boot/vmlinuz-smp entries to follow symlink.
    foreach $image (keys %ofpkgs) {
	pkgs::packageFlagSelected($ofpkgs{$image}) or next;
	if (my $v = readlink "$o->{prefix}/boot/$image") {
	    $v = "/boot/$v" if $v !~ m|^/|;
	    if (-e "$o->{prefix}$v") {
		my $e = lilo::get("/boot/$image", $o->{bootloader}) or next;
		$e->{kernel_or_dev} = $v;
		log::l("renaming /boot/$image entry by $v");
	    }
	}
    }
}

sub setupBootloaderBefore {
    my ($o) = @_;
    if (arch() =~ /alpha/) {
	if (my $dev = fsedit::get_root($o->{fstab})) {
	    $o->{bootloader}{boot} ||= "/dev/$dev->{rootDevice}";
	    $o->{bootloader}{root} ||= "/dev/$dev->{device}";
	    $o->{bootloader}{part_nb} ||= first($dev->{device} =~ /(\d+)/);
	}
    } elsif (arch() =~ /^sparc/) {
	require silo;
        silo::suggest($o->{prefix}, $o->{bootloader}, $o->{hds}, $o->{fstab}, install_any::kernelVersion($o));
    } else {
	require lilo;
        lilo::suggest($o->{prefix}, $o->{bootloader}, $o->{hds}, $o->{fstab}, install_any::kernelVersion($o));
	if ($o->{miscellaneous}{profiles}) {
	    my $e = lilo::get_label("linux", $o->{bootloader});
	    push @{$o->{bootloader}{entries}}, { %$e, label => "office", append => "$e->{append} prof=Office" };
	    $e->{append} .= " prof=Home";
	}
        lilo::suggest_floppy($o->{bootloader}) if $o->{security} <= 3;
	$o->{bootloader}{keytable} ||= keyboard::keyboard2kmap($o->{keyboard});
    }
}

sub setupBootloader($) {
    my ($o) = @_;
    return if $::g_auto_install;

    if (arch() =~ /alpha/) {
	return if $::testing;
	my $b = $o->{bootloader};
	$b->{boot} or $o->ask_warn('', "Can't install aboot, not a bsd disklabel"), return;
		
	run_program::rooted($o->{prefix}, "swriteboot", $b->{boot}, "/boot/bootlx") or do {
	    cdie "swriteboot failed";
	    run_program::rooted($o->{prefix}, "swriteboot", "-f1", $b->{boot}, "/boot/bootlx");
	};
	run_program::rooted($o->{prefix}, "abootconf", $b->{boot}, $b->{part_nb});
 
	output "$o->{prefix}/etc/aboot.conf", 
	  map_index { "$::i:$b->{part_nb}$_ root=$b->{root} $b->{perImageAppend}\n" }
	    map { /$o->{prefix}(.*)/ } eval { glob_("$o->{prefix}/boot/vmlinux*") };
    } elsif (arch() =~ /^sparc/) {
        silo::install($o->{prefix}, $o->{bootloader});
    } else {
	$o->{lnx4win} ?
	  lilo::install_loadlin($o->{prefix}, $o->{bootloader}, $o->{fstab}) :
	      lilo::install($o->{prefix}, $o->{bootloader}, $o->{fstab}, $o->{hds});
    }
}

#------------------------------------------------------------------------------
sub setupXfreeBefore {
    my ($o) = @_;
    my $xkb = $o->{X}{keyboard}{xkb_keymap} || keyboard::keyboard2xkb($o->{keyboard});
    if (!-e "$o->{prefix}/usr/X11R6/lib/X11/xkb/symbols/$xkb" && (my $f = keyboard::xmodmap_file($o->{keyboard}))) {
	commands::cp("-f", $f, "$o->{prefix}/etc/X11/xinit/Xmodmap");	
	$xkb = '';
    }
    $o->{X}{keyboard}{xkb_keymap} = $xkb;
    $o->{X}{mouse} = $o->{mouse};
    $o->{X}{wacom} = $o->{wacom};

    require Xconfig;
    Xconfig::getinfoFromDDC($o->{X});

    #- keep this here if the package has to be updated.
    $o->pkg_install("XFree86");
}
sub setupXfree {
    my ($o) = @_;
    $o->setupXfreeBefore;

    require Xconfigurator;
    require class_discard;
    { local $::testing = 0; #- unset testing
      local $::auto = 1;
      local $::skiptest = 1;
      Xconfigurator::main($o->{prefix}, $o->{X}, class_discard->new, $o->{allowFB}, bool($o->{pcmcia}), sub {
         $o->pkg_install("XFree86-$_[0]");
      });
    }
    $o->setupXfreeAfter;
}
sub setupXfreeAfter {
    my ($o) = @_;
    if ($o->{X}{card}{server} eq 'FBDev') {
	unless (install_any::setupFB($o, Xconfigurator::getVGAMode($o->{X}))) {
	    log::l("disabling automatic start-up of X11 if any as setup framebuffer failed");
	    Xconfigurator::rewriteInittab(3) unless $::testing; #- disable automatic start-up of X11 on error.
	}
    }
    if ($o->{X}{default_depth} >= 16 && $o->{X}{card}{default_wres} >= 1024) {
	log::l("setting large icon style for kde");
	install_any::kderc_largedisplay($o->{prefix});
    }
}

#------------------------------------------------------------------------------
sub miscellaneousNetwork {
    my ($o) = @_;
    setVarsInSh ("$o->{prefix}/etc/profile.d/proxy.sh",  $o->{miscellaneous}, qw(http_proxy ftp_proxy));
    setVarsInCsh("$o->{prefix}/etc/profile.d/proxy.csh", $o->{miscellaneous}, qw(http_proxy ftp_proxy));
}

#------------------------------------------------------------------------------
sub miscellaneous {
    my ($o) = @_;

    my %s = getVarsFromSh("$o->{prefix}/etc/sysconfig/system");
    $o->{miscellaneous}{HDPARM} ||= $s{HDPARM} if exists $s{HDPARM};
    $o->{miscellaneous}{CLEAN_TMP} ||= $s{CLEAN_TMP} if exists $s{CLEAN_TMP};
    $o->{security} ||= $s{SECURITY} if exists $s{SECURITY};

    $ENV{SECURE_LEVEL} = $o->{security};
    add2hash_ $o, { useSupermount => $o->{security} < 4 && $o->{installClass} !~ /corporate|server/ };

    cat_("/proc/cmdline") =~ /mem=(\S+)/;
    add2hash_($o->{miscellaneous} ||= {}, { numlock => !$o->{pcmcia}, $1 ? (memsize => $1) : () });

    local $_ = $o->{bootloader}{perImageAppend};
    if (my $ramsize = $o->{miscellaneous}{memsize} and !/mem=/) {
	$_ .= " mem=$ramsize";
    }
    if (my @l = detect_devices::getIDEBurners() and !/ide-scsi/) {
	$_ .= " " . join(" ", (map { "$_=ide-scsi" } @l), 
			 map { "$_->{device}=ide-floppy" } detect_devices::ide_zips());
    }
    if (my $m = detect_devices::hasUltra66()) {
	$_ .= " $m" if !/ide.=/;
    }

    #- keep some given parameters
    #-TODO

    log::l("perImageAppend: $_");
    $o->{bootloader}{perImageAppend} = $_;
}

#------------------------------------------------------------------------------
sub generateAutoInstFloppy($) {
    my ($o) = @_;
}

#------------------------------------------------------------------------------
sub hasNetwork {
    my ($o) = @_;

    $o->{intf} && $o->{netc}{NETWORKING} ne 'false' || $o->{modem};
}

#------------------------------------------------------------------------------
sub upNetwork {
    my ($o, $pppAvoided) = @_;

    modules::write_conf("$o->{prefix}/etc/conf.modules");
    if ($o->{intf} && $o->{netc}{NETWORKING} ne 'false') {
	network::up_it($o->{prefix}, $o->{intf});
    } elsif (!$pppAvoided && $o->{modem} && !$o->{modem}{isUp}) {
	eval { modules::load_multi(qw(serial ppp)) };
	run_program::rooted($o->{prefix}, "/etc/rc.d/init.d/syslog", "start");
	run_program::rooted($o->{prefix}, "ifup", "ppp0");
	$o->{modem}{isUp} = 1;
    } else {
	$::testing or return;
    }
    1;
}

#------------------------------------------------------------------------------
sub downNetwork {
    my ($o, $pppOnly) = @_;

    modules::write_conf("$o->{prefix}/etc/conf.modules");
    if (!$pppOnly && $o->{intf} && $o->{netc}{NETWORKING} ne 'false') {
	network::down_it($o->{prefix}, $o->{intf});
    } elsif ($o->{modem} && $o->{modem}{isUp}) {
	run_program::rooted($o->{prefix}, "ifdown", "ppp0");
	run_program::rooted($o->{prefix}, "/etc/rc.d/init.d/syslog", "stop");
	eval { modules::unload($_) foreach qw(ppp serial) };
	$o->{modem}{isUp} = 0;
    } else {
	$::testing or return;
    }
    1;
}

#------------------------------------------------------------------------------
sub cleanIfFailedUpgrade($) {
    my ($o) = @_;

    #- if an upgrade has failed, there should be .mdkgisave files around.
    if ($o->{isUpgrade}) {
	foreach (@filesToSaveForUpgrade) {
	    if (-e "$o->{prefix}/$_" && -e "$o->{prefix}/$_.mdkgisave") {
		rename "$o->{prefix}/$_", "$o->{prefix}/$_.mdkginew"; #- keep new files around in case !
		rename "$o->{prefix}/$_.mdkgisave", "$o->{prefix}/$_";
	    }
	}
    }
}

#-######################################################################################
#- Wonderful perl :(
#-######################################################################################
1;