package help; use common qw(:common); %steps = ( selectLanguage => __("

Pixel's links

Search

Quelques sites de recherche : MetaCrawler, dejanews, yahoo(fr), yahoo, infoseek, altavista, excite Choose preferred language for install and system usage."), selectKeyboard => __("Choose the layout corresponding to your keyboard from the list above"), selectPath => __("Choose \"Installation\" if there are no previous versions of Linux installed, or if you wish use to multiple distributions or versions. Choose \"Update\" if you wish to update a previous version of Mandrake Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) or 6.0 (Venus)."), selectInstallClass => __("Select: - Beginner: If you have never installed Linux before. - Developer: If you are familiar with Linux and will be using the computer primarily for software development, you will find happiness here. - Server: If you wish to install a general purpose server (for mail, printing...), select this. - Expert: If you are fluent with GNU/Linux and want to perform a highly customized installation, this Install Class is for you."), setupSCSI => __("DrakX will attempt at first to look for one or more PCI SCSI adapter(s). If it finds it (or them) and knows which driver(s) to use, it will insert it (them) automatically. If your SCSI adapter is an ISA board, or is a PCI board but DrakX doesn't know which driver to use for this card, or if you have no SCSI adapters at all, you will then be prompted on whether you have one or not. If you have none, answer \"No\". If you have one or more, answer \"Yes\". A list of drivers will then pop up, from which you will have to select one. After you have selected the driver, DrakX will ask if you want to specify options for it. First, try and let the driver probe for the hardware: it usually works fine. If not, do not forget the information on your hardware that you could get from your documentation or from Windows (if you have it on your system), as suggested by the installation guide. These are the options you will need to provide to the driver."), partitionDisks => __("In this stage, you may choose what partition(s) use to install your Linux-Mandrake system."), #At this point, hard drive partitions must be defined. (Unless you #are overwriting a previous install of Linux and have already defined #your hard drive partitions as desired.) This operation consists of #logically dividing the computer's hard drive capacity into separate #areas for use. # # #Two common partition are: the root partition (/), which is the starting #point of the filesystem's directory hierarchy, and /boot, which contains #all files necessary to start the operating system when the #computer is first turned on. # # #Because the effects of this process are usually irreversible, partitioning #can be intimidating and stressful to the unexperienced. DiskDrake #simplifies the process so that it need not be. Consult the documentation #and take your time before proceeding."), formatPartitions => __("Any partitions that have been newly defined must be formatted for use (formatting meaning creating a filesystem). At this time, you may wish to re-format some already existing partitions to erase the data they contain. Note: it is not necessary to re-format pre-existing partitions, particularly if they contain files or data you wish to keep. Typically retained are /home and /usr/local."), choosePackages => __("You may now select the packages you wish to install. Please note that some packages require the installation of others. These are referred to as package dependencies. The packages you select, and the packages they require will be automatically selected for install. It is impossible to install a package without installing all of its dependencies. Information on each category and specific package is available in the area titled \"Info\", located between list of packages and the five buttons \"Install\", \"Select more/less\" and \"Show more/less\"."), doInstallStep => __("The packages selected are now being installed. This operation should only take a few minutes."), selectMouse => __("If DrakX failed to find your mouse, or if you want to check what it has done, you will be presented the list of mice above. If you agree with DrakX' settings, just jump to the section you want by clicking on it in the menu on the left. Otherwise, choose a mouse type in the menu which you think is the closest match for your mouse. In case of a serial mouse, you will also have to tell DrakX which serial port it is connected to."), configureNetwork => __("This section is dedicated to configuring a local area network, or LAN. If you answer \"Yes\" here, DrakX will try to find an Ethernet adapter on your machine. PCI adapters should be found and initialized automatically. However, if your peripheral is ISA, autodetection will not work, and you will have to choose a driver from the list that will appear then. As for SCSI adapters, you can let the driver probe for the adapter in the first time, otherwise you will have to specify the options to the driver that you will have fetched from Windows' control panel. If you install a Linux-Mandrake system on a machine which is part of an already existing network, the network administrator will have given you all necessary information (IP address, network submask or netmask for short, and hostname). If you're setting up a private network at home for example, you should choose addresses "), configureTimezone => __("Help"), configureServices => __("Help"), configurePrinter => __("Linux can deal with many types of printer. Each of these types require a different setup. If your printer is directly connected to your computer, select \"Local printer\". You will then have to tell which port your printer is connected to, and select the appropriate filter. If you want to access a printer located on a remote Unix machine, you will have to select \"Remote lpd queue\". In order to make it work, no username or password is required, but you will need to know the name of the printing queue on this server. If you want to access a SMB printer (which means, a printer located on a remote Windows 9x/NT machine), you will have to specify its SMB name (which is not its TCP/IP name), and possibly its IP address, plus the username, workgroup and password required in order to access the printer, and of course the name of the printer. The same goes for a NetWare printer, except that you need no workgroup information."), setRootPassword => __("You must now enter the root password for your Linux-Mandrake system. The password must be entered twice to verify that both password entries are identical. Root is the administrator of the system, and is the only user allowed to modify the system configuration. Therefore, choose this password carefully! Unauthorized use of the root account can be extremely dangerous to the integrity of the system and its data, and other systems connected to it. The password should be a mixture of alphanumeric characters and a least 8 characters long. It should *never* be written down. Do not make the password too long or complicated, though: you must be able to remember without too much effort."), addUser => __("You may now create one or more \"regular\" user account(s), as opposed to the \"priviledged\" user account, root. You can create one or more account(s) for each person you want to allow to use the computer. Note that each user account will have its own preferences (graphical environment, program settings, etc.) and its own \"home directory\", in which these preferences are stored. First of all, create an account for yourself! Even if you will be the only user of the machine, you may NOT connect as root for daily use of the system: it's a very high security risk. Making the system unusable is very often a typo away. Therefore, you should connect to the system using the user account you will have created here, and login as root only for administration and maintenance purposes."), createBootdisk => __("Please, please, answer \"Yes\" here! Just for example, when you reinstall Windows, it will overwrite the boot sector. Unless you have made the bootdisk as suggested, you won't be able to boot into Linux any more!"), setupBootloader => __("You need to indicate where you wish to place the information required to boot to Linux. Unless you know exactly what you are doing, choose \"First sector of drive (MBR)\"."), configureX => __("Now it's time to configure the X Window System, which is the core of the Linux GUI (Graphical User Interface). For this purpose, you must configure your video card and monitor. Most of these steps are automated, though, therefore your work may only consist of verifying what has been done and accept the settings :) When the configuration is over, X will be started (unless you ask DrakX not to) so that you can check and see if the settings suit you. If they don't, you can come back and change them, as many times as necessary."), exitInstall => __("Help"), ); #- ################################################################################ %steps_long = ( selectLanguage => __("Choose preferred language for install and system usage."), selectKeyboard => __("Choose the layout corresponding to your keyboard from the list above"), selectPath => __("Choose \"Installation\" if there are no previous versions of Linux installed, or if you wish use to multiple distributions or versions. Choose \"Update\" if you wish to update a previous version of Mandrake Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) or 6.0 (Venus)."), selectInstallClass => __("Select: - Beginner: If you have never installed Linux before, and wish to install the distribution elected \"Product of the year\" for 1999, click here. - Developer: If you are familiar with Linux and will be using the computer primarily for software development, you will find happiness here. - Server: If you wish to install a general purpose server, or the Linux distribution elected \"Distribution/Server\" for 1999, select this. - Expert: If you are fluent with GNU/Linux and want to perform a highly customized installation, this Install Class is for you."), setupSCSI => __("DrakX will attempt at first to look for one or more PCI SCSI adapter(s). If it finds it (or them) and knows which driver(s) to use, it will insert it (them) automatically. If your SCSI adapter is ISA, or is PCI but DrakX doesn't know which driver to use for this card, or if you have no SCSI adapters at all, you will then be prompted on whether you have one or not. If you have none, answer \"No\". If you have one or more, answer \"Yes\". A list of drivers will then pop up, from which you will have to select one. After you have selected the driver, DrakX will ask if you want to specify options for it. First, try and let the driver probe for the hardware: it usually works fine. If not, do not forget the information on your hardware that you could get from you documentation or from Windows (if you have it on your system), as suggested by the installation guide. These are the options you will need to provide to the driver."), partitionDisks => __("In this stage, you may choose what partition(s) use to install your Linux-Mandrake system."), #At this point, hard drive partitions must be defined. (Unless you #are overwriting a previous install of Linux and have already defined #your hard drive partitions as desired.) This operation consists of #logically dividing the computer's hard drive capacity into separate #areas for use. # # #Two common partition are: the root partition (/), which is the starting #point of the filesystem's directory hierarchy, and /boot, which contains #all files necessary to start the operating system when the #computer is first turned on. # # #Because the effects of this process are usually irreversible, partitioning #can be intimidating and stressful to the unexperienced. DiskDrake #simplifies the process so that it need not be. Consult the documentation #and take your time before proceeding."), formatPartitions => __("Any partitions that have been newly defined must be formatted for use (formatting meaning creating a filesystem). At this time, you may wish to re-format some already existing partitions to erase the data they contain. Note: it is not necessary to re-format pre-existing partitions, particularly if they contain files or data you wish to keep. Typically retained are /home and /usr/local."), choosePackages => __("You may now select the packages you wish to install. Please note that some packages require the installation of others. These are referred to as package dependencies. The packages you select, and the packages they require will be automatically selected for install. It is impossible to install a package without installing all of its dependencies. Information on each category and specific package is available in the area titled \"Info\", located between list of packages and the five buttons \"Install\", \"Select more/less\" and \"Show more/less\"."), doInstallStep => __("The packages selected are now being installed. This operation should only take a few minutes."), selectMouse => __("If DrakX failed to find your mouse, or if you want to check what it has done, you will be presented the list of mice above. If you agree with DrakX' settings, just jump to the section you want by clicking on it in the menu on the left. Otherwise, choose a mouse type in the menu which you think is the closest match for your mouse. In case of a serial mouse, you will also have to tell DrakX which serial port it is connected to."), configureNetwork => __("This section is dedicated to configuring a local area network, or LAN. If you answer \"Yes\" here, DrakX will try to find an Ethernet adapter on your machine. PCI adapters should be found and initialized automatically. However, if your peripheral is ISA, autodetection will not work, and you will have to choose a driver from the list that will appear then. As for SCSI adapters, you can let the driver probe for the adapter in the first time, otherwise you will have to specify the options to the driver that you will have fetched from Windows' control panel. If you install a Linux-Mandrake system on a machine which is part of an already existing network, the network administrator will have given you all necessary information (IP address, network submask or netmask for short, and hostname). If you're setting up a private network at home for example, you should choose addresses "), configureTimezone => __("Help"), configureServices => __("Help"), configurePrinter => __("Linux can deal with many types of printer. Each of these types require a different setup. If your printer is directly connected to your computer, select \"Local printer\". You will then have to tell which port your printer is connected to, and select the appropriate filter. If you want to access a printer located on a remote Unix machine, you will have to select \"Remote lpd queue\". In order to make it work, no username or password is required, but you will need to know the name of the printing queue on this server. If you want to access a SMB printer (which means, a printer located on a remote Windows 9x/NT machine), you will have to specify its SMB name (which is not its TCP/IP name), and possibly its IP address, plus the username, workgroup and password required in order to access the printer, and of course the name of the printer.The same goes for a NetWare printer, except that you need no workgroup information."), setRootPassword => __("You must now enter the root password for your Linux-Mandrake system. The password must be entered twice to verify that both password entries are identical. Root is the administrator of the system, and is the only user allowed to modify the system configuration. Therefore, choose this password carefully! Unauthorized use of the root account can be extremely dangerous to the integrity of the system and its data, and other systems connected to it. The password should be a mixture of alphanumeric characters and a least 8 characters long. It should *never* be written down. Do not make the password too long or complicated, though: you must be able to remember without too much effort."), addUser => __("You may now create one or more \"regular\" user account(s), as opposed to the \"priviledged\" user account, root. You can create one or more account(s) for each person you want to allow to use the computer. Note that each user account will have its own preferences (graphical environment, program settings, etc.) and its own \"home directory\", in which these preferences are stored. First of all, create an account for yourself! Even if you will be the only user of the machine, you may NOT connect as root for daily use of the system: it's a very high security risk. Making the system unusable is very often a typo away. Therefore, you should connect to the system using the user account you will have created here, and login as root only for administration and maintenance purposes."), createBootdisk => __("Please, please, answer \"Yes\" here! Just for example, when you reinstall Windows, it will overwrite the boot sector. Unless you have made the bootdisk as suggested, you won't be able to boot into Linux any more!"), setupBootloader => __("You need to indicate where you wish to place the information required to boot to Linux. Unless you know exactly what you are doing, choose \"First sector of drive (MBR)\"."), configureX => __("Now it's time to configure the X Window System, which is the core of the Linux GUI (Graphical User Interface). For this purpose, you must configure your video card and monitor. Most of these steps are automated, though, therefore your work may only consist of verifying what has been done and accept the settings :) When the configuration is over, X will be started (unless you ask DrakX not to) so that you can check and see if the settings suit you. If they don't, you can come back and change them, as many times as necessary."), exitInstall => __("Help"), );