package help; use common qw(:common); %steps = ( selectLanguage => __("Choose preferred language for install and system usage."), selectKeyboard => __("Choose the layout corresponding to your keyboard from the list above"), selectPath => __("Choose \"Install\" if there are no previous versions of Linux installed, or if you wish to use multiple distributions or versions. Choose \"Upgrade\" if you wish to update a previous version of Mandrake Linux: 5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold 2000 or 7.0 (Air)."), selectInstallClass => __("Select: - Recommended: If you have never installed Linux before, choose this. NOTE: networking will not be configured during installation, use \"LinuxConf\" to configure it after the install completes. - Customized: If you are familiar enough with GNU/Linux, you may then choose the primary usage for your machine. See below for details. - Expert: This supposes that you are fluent with GNU/Linux and want to perform a highly customized installation. As for a \"Customized\" installation class, you will be able to select the usage for your system. But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE DOING! The different choices for your machine's usage (provided, hence, that you have chosen either \"Custom\" or \"Expert\" as an installation class) are the following: - Normal: choose this if you intend to use your machine primarily for everyday use (office work, graphics manipulation and so on). Do not expect any compiler, development utility et al. installed. - Development: as its name says. Choose this if you intend to use your machine primarily for software development. You will then have a complete collection of software installed in order to compile, debug and format source code, or create software packages. - Server: choose this if the machine which you're installing Linux-Mandrake on is intended to be used as a server. Either a file server (NFS or SMB), a print server (Unix' lp (Line Printer) protocol or Windows style SMB printing), an authentication server (NIS), a database server and so on. As such, do not expect any gimmicks (KDE, GNOME...) to be installed. "), setupSCSI => __("DrakX will attempt at first to look for one or more PCI SCSI adapter(s). If it finds it (or them) and knows which driver(s) to use, it will insert it (them) automatically. If your SCSI adapter is an ISA board, or is a PCI board but DrakX doesn't know which driver to use for this card, or if you have no SCSI adapters at all, you will then be prompted on whether you have one or not. If you have none, answer \"No\". If you have one or more, answer \"Yes\". A list of drivers will then pop up, from which you will have to select one. After you have selected the driver, DrakX will ask if you want to specify options for it. First, try and let the driver probe for the hardware: it usually works fine. If not, do not forget the information on your hardware that you could get from your documentation or from Windows (if you have it on your system), as suggested by the installation guide. These are the options you will need to provide to the driver."), partitionDisks => __("At this point, you may choose what partition(s) to use to install your Linux-Mandrake system if they have been already defined (from a previous install of Linux or from another partitionning tool). In other cases, hard drive partitions must be defined. This operation consists of logically dividing the computer's hard drive capacity into separate areas for use. If you have to create new partitions, use \"Auto allocate\" to automatically create partitions for Linux. You can select the disk for partitionning by clicking on \"hda\" for the first IDE drive, \"hdb\" for the second or \"sda\" for the first SCSI drive and so on. Two common partition are: the root partition (/), which is the starting point of the filesystem's directory hierarchy, and /boot, which contains all files necessary to start the operating system when the computer is first turned on. Because the effects of this process are usually irreversible, partitioning can be intimidating and stressful to the unexperienced user. DiskDrake simplifies the process so that it must not be. Consult the documentation and take your time before proceeding. You can reach any option using the keyboard: navigate through the partitions using Tab and Up/Down arrows. When a partition is selected, you can use: - Ctrl-c to create a new partition (when an empty partition is selected) - Ctrl-d to delete a partition - Ctrl-m to set the mount point "), formatPartitions => __("Any partitions that have been newly defined must be formatted for use (formatting meaning creating a filesystem). At this time, you may wish to re-format some already existing partitions to erase the data they contain. Note: it is not necessary to re-format pre-existing partitions, particularly if they contain files or data you wish to keep. Typically retained are /home and /usr/local."), choosePackages => __("You may now select the packages you wish to install. First you can select group of package to install or upgrade. After that you can select more packages according to the total size you wish to select. If you are in expert mode, you can select packages individually. Please note that some packages require the installation of others. These are referred to as package dependencies. The packages you select, and the packages they require will be automatically selected for install. It is impossible to install a package without installing all of its dependencies."), doInstallStep => __("The packages selected are now being installed. This operation should take a few minutes unless you have chosen to upgrade an existing system, in that case it can take more time even before upgrade starts."), selectMouse => __("If DrakX failed to find your mouse, or if you want to check what it has done, you will be presented the list of mice above. If you agree with DrakX' settings, just jump to the section you want by clicking on it in the menu on the left. Otherwise, choose a mouse type in the menu which you think is the closest match for your mouse. In case of a serial mouse, you will also have to tell DrakX which serial port it is connected to."), selectSerialPort => __("Please select the correct port. For example, the COM1 port under MS Windows is named ttyS0 under Linux."), configureNetwork => __("This section is dedicated to configuring a local area network (LAN) or a modem. Choose \"Local LAN\" and DrakX will try to find an Ethernet adapter on your machine. PCI adapters should be found and initialized automatically. However, if your peripheral is ISA, autodetection will not work, and you will have to choose a driver from the list that will appear then. As for SCSI adapters, you can let the driver probe for the adapter in the first time, otherwise you will have to specify the options to the driver that you will have fetched from documentation of your hardware. If you install a Linux-Mandrake system on a machine which is part of an already existing network, the network administrator will have given you all necessary information (IP address, network submask or netmask for short, and hostname). If you're setting up a private network at home for example, you should choose addresses. Choose \"Dialup with modem\" and the Internet connection with a modem will be configured. DrakX will try to find your modem, if it fails you will have to select the right serial port where your modem is connected to."), configureNetworkIP => __("Enter: - IP address: if you don't know it, ask your network administrator or ISP. - Netmask: \"255.255.255.0\" is generally a good choice. If you are not sure, ask your network administrator or ISP. - Automatic IP: If your network uses bootp or dhcp protocol, select this option. If selected, no value is needed in \"IP address\". If you are not sure, ask your network administrator or ISP. "), configureNetworkISP => __("You may now enter dialup options. If you're not sure what to enter, the correct information can be obtained from your ISP."), configureNetworkProxy => __("If you will use proxies, please configure them now. If you don't know if you should use proxies, ask your network administrator or your ISP."), installCrypto => __("You can install cryptographic package if your internet connection has been set up correctly. First choose a mirror where you wish to download packages and after that select the packages to install. Note you have to select mirror and cryptographic packages according to your legislation."), configureTimezone => __("You can now select your timezone according to where you live. Linux manages time in GMT or \"Greenwich Mean Time\" and translates it in local time according to the time zone you have selected."), configureServices => __("You may now choose which services you want to see started at boot time. When your mouse comes over an item, a small balloon help will popup which describes the role of the service. Be especially careful in this step if you intend to use your machine as a server: you will probably want not to start any services which you don't want."), configurePrinter => __("Linux can deal with many types of printer. Each of these types require a different setup. Note however that the print spooler uses 'lp' as the default printer name; so you must have one printer with such a name; but you can give several names, separated by '|' characters, to a printer. So, if you prefer to have a more meaningful name you just have to put it first, eg: \"My Printer|lp\". The printer having \"lp\" in its name(s) will be the default printer. If your printer is physically connected to your computer, select \"Local printer\". You will then have to tell which port your printer is connected to, and select the appropriate filter. If you want to access a printer located on a remote Unix machine, you will have to select \"Remote lpd\". In order to make it work, no username or password is required, but you will need to know the name of the printing queue on this server. If you want to access a SMB printer (which means, a printer located on a remote Windows 9x/NT machine), you will have to specify its SMB name (which is not its TCP/IP name), and possibly its IP address, plus the username, workgroup and password required in order to access the printer, and of course the name of the printer. The same goes for a NetWare printer, except that you need no workgroup information."), setRootPassword => __("You can now enter the root password for your Linux-Mandrake system. The password must be entered twice to verify that both password entries are identical. Root is the administrator of the system, and is the only user allowed to modify the system configuration. Therefore, choose this password carefully! Unauthorized use of the root account can be extremely dangerous to the integrity of the system and its data, and other systems connected to it. The password should be a mixture of alphanumeric characters and a least 8 characters long. It should NEVER be written down. Do not make the password too long or complicated, though: you must be able to remember without too much effort."), setRootPasswordMd5 => __("To enable a more secure system, you should select \"Use shadow file\" and \"Use MD5 passwords\"."), setRootPasswordNIS => __("If your network uses NIS, select \"Use NIS\". If you don't know, ask your network administrator."), addUser => __("You may now create one or more \"regular\" user account(s), as opposed to the \"privileged\" user account, root. You can create one or more account(s) for each person you want to allow to use the computer. Note that each user account will have its own preferences (graphical environment, program settings, etc.) and its own \"home directory\", in which these preferences are stored. First of all, create an account for yourself! Even if you will be the only user of the machine, you may NOT connect as root for daily use of the system: it's a very high security risk. Making the system unusable is very often a typo away. Therefore, you should connect to the system using the user account you will have created here, and login as root only for administration and maintenance purposes."), createBootdisk => __("It is strongly recommended that you answer \"Yes\" here. If you install Microsoft Windows at a later date it will overwrite the boot sector. Unless you have made a bootdisk as suggested, you will not be able to boot into Linux any more."), setupBootloaderBeginner => __("You need to indicate where you wish to place the information required to boot to Linux. Unless you know exactly what you are doing, choose \"First sector of drive (MBR)\"."), setupBootloader => __("Unless you know specifically otherwise, the usual choice is \"/dev/hda\" (primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."), setupBootloaderAddEntry => __("LILO (the LInux LOader) and Grub are bootloaders: they are able to boot either Linux or any other operating system present on your computer. Normally, these other operating systems are correctly detected and installed. If this is not the case, you can add an entry by hand in this screen. Be careful as to choose the correct parameters. You may also want not to give access to these other operating systems to anyone, in which case you can delete the corresponding entries. But in this case, you will need a boot disk in order to boot them!"), setupBootloaderGeneral => __("LILO and grub main options are: - Boot device: Sets the name of the device (e.g. a hard disk partition) that contains the boot sector. Unless you know specifically otherwise, choose \"/dev/hda\". - Delay before booting default image: Specifies the number in tenths of a second the boot loader should wait before booting the first image. This is useful on systems that immediately boot from the hard disk after enabling the keyboard. The boot loader doesn't wait if \"delay\" is omitted or is set to zero. - Video mode: This specifies the VGA text mode that should be selected when booting. The following values are available: * normal: select normal 80x25 text mode. * : use the corresponding text mode."), configureX => __("Now it's time to configure the X Window System, which is the core of the Linux GUI (Graphical User Interface). For this purpose, you must configure your video card and monitor. Most of these steps are automated, though, therefore your work may only consist of verifying what has been done and accept the settings :) When the configuration is over, X will be started (unless you ask DrakX not to) so that you can check and see if the settings suit you. If they don't, you can come back and change them, as many times as necessary."), configureXmain => __("If something is wrong in X configuration, use these options to correctly configure the X Window System."), configureXxdm => __("If you prefer to use a graphical login, select \"Yes\". Otherwise, select \"No\"."), miscellaneous => __("You can now select some miscellaneous options for your system. - Use hard drive optimizations: this option can improve hard disk performance but is only for advanced users: some buggy chipsets can ruin your data, so beware. Note that the kernel has a builtin blacklist of drives and chipsets, but if you want to avoid bad surprises, leave this option unset. - Choose security level: you can choose a security level for your system. Please refer to the manual for complete information. Basically: if you don't know, select \"Medium\" ; if you really want to have a secure machine, choose \"Paranoid\" but beware: IN THIS LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED! If you want to be root, you have to login as a user and then use \"su\". More generally, do not expect to use your machine for anything but as a server. You have been warned. - Precise RAM size if needed: unfortunately, in today's PC world, there is no standard method to ask the BIOS about the amount of RAM present in your computer. As a consequence, Linux may fail to detect your amount of RAM correctly. If this is the case, you can specify the correct amount of RAM here. Note that a difference of 2 or 4 MB is normal. - Removable media automounting: if you would prefer not to manually mount removable media (CD-ROM, Floppy, Zip) by typing \"mount\" and \"umount\", select this option. - Enable NumLock at startup: if you want NumLock enabled after booting, select this option (Note: NumLock may or may not work under X)."), exitInstall => __("Your system is going to reboot. After rebooting, your new Linux Mandrake system will load automatically. If you want to boot into another existing operating system, please read the additional instructions."), ); #-#- ################################################################################ #-#- NO LONGER UP-TO-DATE... #-%steps_long = ( #-selectLanguage => #- __("Choose preferred language for install and system usage."), #- #-selectKeyboard => #- __("Choose the layout corresponding to your keyboard from the list above"), #- #-selectPath => #- __("Choose \"Installation\" if there are no previous versions of Linux #-installed, or if you wish to use multiple distributions or versions. #- #- #-Choose \"Update\" if you wish to update a previous version of Mandrake #-Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) or 6.0 (Venus)."), #- #-selectInstallClass => #- __("Select: #- #- - Beginner: If you have never installed Linux before, and wish to #-install the distribution elected \"Product of the year\" for 1999, #-click here. #- #- - Developer: If you are familiar with Linux and will be using the #-computer primarily for software development, you will find happiness #-here. #- #- - Server: If you wish to install a general purpose server, or the #-Linux distribution elected \"Distribution/Server\" for 1999, select #-this. #- #- - Expert: If you are fluent with GNU/Linux and want to perform #-a highly customized installation, this Install Class is for you."), #- #-setupSCSI => #- __("DrakX will attempt at first to look for one or more PCI #-SCSI adapter(s). If it finds it (or them) and knows which driver(s) #-to use, it will insert it (them) automatically. #- #-If your SCSI adapter is ISA, or is PCI but DrakX doesn't know #-which driver to use for this card, or if you have no SCSI adapters #-at all, you will then be prompted on whether you have one or not. #-If you have none, answer \"No\". If you have one or more, answer #-\"Yes\". A list of drivers will then pop up, from which you will #-have to select one. #- #-After you have selected the driver, DrakX will ask if you #-want to specify options for it. First, try and let the driver #-probe for the hardware: it usually works fine. #- #-If not, do not forget the information on your hardware that you #-could get from you documentation or from Windows (if you have #-it on your system), as suggested by the installation guide. #-These are the options you will need to provide to the driver."), #- #-partitionDisks => #- __("In this stage, you may choose what partition(s) use to install your #-Linux-Mandrake system."), #- #-#At this point, hard drive partitions must be defined. (Unless you #-#are overwriting a previous install of Linux and have already defined #-#your hard drive partitions as desired.) This operation consists of #-#logically dividing the computer's hard drive capacity into separate #-#areas for use. #-# #-# #-#Two common partition are: the root partition (/), which is the starting #-#point of the filesystem's directory hierarchy, and /boot, which contains #-#all files necessary to start the operating system when the #-#computer is first turned on. #-# #-# #-#Because the effects of this process are usually irreversible, partitioning #-#can be intimidating and stressful to the unexperienced. DiskDrake #-#simplifies the process so that it need not be. Consult the documentation #-#and take your time before proceeding."), #- #-formatPartitions => #- __("Any partitions that have been newly defined must be formatted for #-use (formatting meaning creating a filesystem). At this time, you may #-wish to re-format some already existing partitions to erase the data #-they contain. Note: it is not necessary to re-format pre-existing #-partitions, particularly if they contain files or data you wish to keep. #-Typically retained are /home and /usr/local."), #- #-choosePackages => #- __("You may now select the packages you wish to install. #- #- #-Please note that some packages require the installation of others. #-These are referred to as package dependencies. The packages you select, #-and the packages they require will be automatically selected for #-install. It is impossible to install a package without installing all #-of its dependencies. #- #- #-Information on each category and specific package is available in the #-area titled \"Info\", located between list of packages and the five #-buttons \"Install\", \"Select more/less\" and \"Show more/less\"."), #- #-doInstallStep => #- __("The packages selected are now being installed. #- #- #-This operation should take a few minutes."), #- #-selectMouse => #- __("If DrakX failed to find your mouse, or if you want to #-check what it has done, you will be presented the list of mice #-above. #- #- #-If you agree with DrakX' settings, just jump to the section #-you want by clicking on it in the menu on the left. Otherwise, #-choose a mouse type in the menu which you think is the closest #-match for your mouse. #- #-In case of a serial mouse, you will also have to tell DrakX #-which serial port it is connected to."), #- #-configureNetwork => #- __("This section is dedicated to configuring a local area network, #-or LAN. If you answer \"Yes\" here, DrakX will try to find an #-Ethernet adapter on your machine. PCI adapters should be found and #-initialized automatically. However, if your peripheral is ISA, #-autodetection will not work, and you will have to choose a driver #-from the list that will appear then. #- #- #-As for SCSI adapters, you can let the driver probe for the adapter #-in the first time, otherwise you will have to specify the options #-to the driver that you will have fetched from Windows' control #-panel. #- #- #-If you install a Linux-Mandrake system on a machine which is part #-of an already existing network, the network administrator will #-have given you all necessary information (IP address, network #-submask or netmask for short, and hostname). If you're setting #-up a private network at home for example, you should choose #-addresses "), #- #-configureTimezone => #- __("Help"), #- #-configureServices => #- __("Help"), #- #-configurePrinter => #- __("Linux can deal with many types of printer. Each of these #-types require a different setup. #- #- #-If your printer is directly connected to your computer, select #-\"Local printer\". You will then have to tell which port your #-printer is connected to, and select the appropriate filter. #- #- #-If you want to access a printer located on a remote Unix machine, #-you will have to select \"Remote lpd queue\". In order to make #-it work, no username or password is required, but you will need #-to know the name of the printing queue on this server. #- #- #-If you want to access a SMB printer (which means, a printer located #-on a remote Windows 9x/NT machine), you will have to specify its #-SMB name (which is not its TCP/IP name), and possibly its IP address, #-plus the username, workgroup and password required in order to #-access the printer, and of course the name of the printer.The same goes #-for a NetWare printer, except that you need no workgroup information."), #- #-setRootPassword => #- __("You must now enter the root password for your Linux-Mandrake #-system. The password must be entered twice to verify that both #-password entries are identical. #- #- #-Root is the administrator of the system, and is the only user #-allowed to modify the system configuration. Therefore, choose #-this password carefully! Unauthorized use of the root account can #-be extremely dangerous to the integrity of the system and its data, #-and other systems connected to it. The password should be a #-mixture of alphanumeric characters and a least 8 characters long. It #-should *never* be written down. Do not make the password too long or #-complicated, though: you must be able to remember without too much #-effort."), #- #-addUser => #- __("You may now create one or more \"regular\" user account(s), as #-opposed to the \"privileged\" user account, root. You can create #-one or more account(s) for each person you want to allow to use #-the computer. Note that each user account will have its own #-preferences (graphical environment, program settings, etc.) #-and its own \"home directory\", in which these preferences are #-stored. #- #- #-First of all, create an account for yourself! Even if you will be the only user #-of the machine, you may NOT connect as root for daily use of the system: it's a #-very high security risk. Making the system unusable is very often a typo away. #- #- #-Therefore, you should connect to the system using the user account #-you will have created here, and login as root only for administration #-and maintenance purposes."), #- #-createBootdisk => #- __("Please, please, answer \"Yes\" here! Just for example, when you #-reinstall Windows, it will overwrite the boot sector. Unless you have #-made the bootdisk as suggested, you won't be able to boot into Linux #-any more!"), #- #-setupBootloader => #- __("You need to indicate where you wish #-to place the information required to boot to Linux. #- #- #-Unless you know exactly what you are doing, choose \"First sector of #-drive (MBR)\"."), #- #-configureX => #- __("Now it's time to configure the X Window System, which is the #-core of the Linux GUI (Graphical User Interface). For this purpose, #-you must configure your video card and monitor. Most of these #-steps are automated, though, therefore your work may only consist #-of verifying what has been done and accept the settings :) #- #- #-When the configuration is over, X will be started (unless you #-ask DrakX not to) so that you can check and see if the #-settings suit you. If they don't, you can come back and #-change them, as many times as necessary."), #- #-exitInstall => #- __("Help"), #-);