package fsedit; # $Id$
use diagnostics;
use strict;
use vars qw(%suggestions);
#-######################################################################################
#- misc imports
#-######################################################################################
use common;
use partition_table qw(:types);
use partition_table::raw;
use detect_devices;
use fsedit;
use devices;
use loopback;
use log;
use fs;
%suggestions = (
N_("simple") => [
{ mntpoint => "/", size => 300 << 11, type =>0x483, ratio => 5, maxsize => 6000 << 11 },
{ mntpoint => "swap", size => 64 << 11, type => 0x82, ratio => 1, maxsize => 500 << 11 },
{ mntpoint => "/home", size => 300 << 11, type =>0x483, ratio => 3 },
], N_("with /usr") => [
{ mntpoint => "/", size => 250 << 11, type =>0x483, ratio => 1, maxsize => 2000 << 11 },
{ mntpoint => "swap", size => 64 << 11, type => 0x82, ratio => 1, maxsize => 500 << 11 },
{ mntpoint => "/usr", size => 300 << 11, type =>0x483, ratio => 4, maxsize => 4000 << 11 },
{ mntpoint => "/home", size => 100 << 11, type =>0x483, ratio => 3 },
], N_("server") => [
{ mntpoint => "/", size => 150 << 11, type =>0x483, ratio => 1, maxsize => 800 << 11 },
{ mntpoint => "swap", size => 64 << 11, type => 0x82, ratio => 2, maxsize => 800 << 11 },
{ mntpoint => "/usr", size => 300 << 11, type =>0x483, ratio => 4, maxsize => 4000 << 11 },
{ mntpoint => "/var", size => 200 << 11, type =>0x483, ratio => 3 },
{ mntpoint => "/home", size => 150 << 11, type =>0x483, ratio => 3 },
{ mntpoint => "/tmp", size => 150 << 11, type =>0x483, ratio => 2, maxsize => 1000 << 11 },
],
);
foreach (values %suggestions) {
if (arch() =~ /ia64/) {
@$_ = ({ mntpoint => "/boot/efi", size => 50 << 11, type => 0xb, ratio => 1, maxsize => 150 << 11 }, @$_);
}
}
my @suggestions_mntpoints = (
"/var/ftp", "/var/www", "/boot",
arch() =~ /sparc/ ? "/mnt/sunos" : arch() =~ /ppc/ ? "/mnt/macos" : "/mnt/windows",
#- RedHat also has /usr/local and /opt
);
my @partitions_signatures = (
[ 0x8e, 0, "HM\1\0" ],
[ 0x83, 0x438, "\x53\xEF" ],
[ 0x183, 0x10034, "ReIsErFs" ],
[ 0x183, 0x10034, "ReIsEr2Fs" ],
[ 0x283, 0, 'XFSB', 0x200, 'XAGF', 0x400, 'XAGI' ],
[ 0x383, 0x8000, 'JFS1' ],
[ 0x82, 4086, "SWAP-SPACE" ],
[ 0x82, 4086, "SWAPSPACE2" ],
[ 0x107, 0x1FE, "\x55\xAA", 0x3, "NTFS" ],
[ 0xc, 0x1FE, "\x55\xAA", 0x52, "FAT32" ],
if_(arch() !~ /^sparc/,
[ 0x6, 0x1FE, "\x55\xAA", 0x36, "FAT" ],
),
);
sub typeOfPart {
my $dev = devices::make($_[0]);
my $t = typeFromMagic($dev, @partitions_signatures);
if ($t == 0x83) {
#- there is no magic to differentiate ext3 and ext2. Using libext2fs
#- to check if it has a journal
$t = 0x483 if c::is_ext3($dev);
}
$t;
}
#-######################################################################################
#- Functions
#-######################################################################################
sub empty_all_hds {
{ hds => [], lvms => [], raids => [], loopbacks => [], raw_hds => [], nfss => [], smbs => [], davs => [], special => [] };
}
sub recompute_loopbacks {
my ($all_hds) = @_;
my @fstab = get_all_fstab($all_hds);
@{$all_hds->{loopbacks}} = map { isPartOfLoopback($_) ? @{$_->{loopback}} : () } @fstab;
}
sub raids {
my ($hds) = @_;
my @parts = get_fstab(@$hds);
{
my @l = grep { isRawRAID($_) } @parts or return [];
detect_devices::raidAutoStart(@l);
}
fs::get_major_minor(@parts);
my @raids;
my @mdstat = cat_("/proc/mdstat");
for (my $i = 0; $i < @mdstat; $i++) {
my ($nb, $level, $mdparts) =
#- line format is:
#- md%d : {in}?active{ (read-only)}? {linear|raid1|raid4|raid5}{ DEVNAME[%d]{(F)}?}*
$mdstat[$i] =~ /^md(\d+).* ([^ \[\]]+) (\S+\[\d+\].*)/ or next;
$level =~ s/raid//; #- { linear | raid0 | raid1 | raid5 } -> { linear | 0 | 1 | 5 }
my $chunks = $mdstat[$i+1] =~ /(\S+) chunks/ ? $1 : "64k";
my @raw_mdparts = map { /([^\[]+)/ } split ' ', $mdparts;
my $type = typeOfPart("md$nb");
log::l("RAID: found md$nb (raid $level) chunks $chunks ", if_($type, "type $type "), "with parts ", join(", ", @raw_mdparts));
$raids[$nb] = { 'chunk-size' => $chunks, type => $type || 0x83, raw_mdparts => \@raw_mdparts,
device => "md$nb", notFormatted => !$type, level => $level };
}
my %devname2part = map { $_->{dev} => { %$_, device => $_->{dev} } } read_proc_partitions_raw();
each_index {
my $raw_mdparts = delete $_->{raw_mdparts};
my @mdparts =
map {
my $mdpart = $devname2part{$_} || { device => $_ };
if (my $part = find { is_same_hd($mdpart, $_) } @parts, @raids) {
$part->{raid} = $::i;
$part->{type} = 0xfd;
delete $part->{mntpoint};
$part;
} else {
#- forget it when not found? that way it won't break much... beurk.
();
}
} @$raw_mdparts;
$_->{disks} = \@mdparts;
} @raids;
require raid;
raid::update(@raids);
\@raids;
}
sub lvms {
my ($all_hds) = @_;
my @pvs = grep { isRawLVM($_) } get_all_fstab($all_hds) or return;
#- otherwise vgscan won't find them
devices::make($_->{device}) foreach @pvs;
require lvm;
my @lvms;
foreach (@pvs) {
my $name = lvm::get_vg($_) or next;
my $lvm = find { $_->{VG_name} eq $name } @lvms;
if (!$lvm) {
$lvm = new lvm($name);
lvm::update_size($lvm);
lvm::get_lvs($lvm);
push @lvms, $lvm;
}
$_->{lvm} = $name;
push @{$lvm->{disks}}, $_;
}
@lvms;
}
sub hds {
my ($flags, $ask_before_blanking) = @_;
$flags ||= {};
$flags->{readonly} && ($flags->{clearall} || $flags->{clear}) and die "conflicting flags readonly and clear/clearall";
my @drives = detect_devices::hds();
my (@hds);
foreach my $hd (@drives) {
$hd->{file} = devices::make($hd->{device});
$hd->{prefix} ||= $hd->{device};
$hd->{readonly} = $flags->{readonly};
my $h = partition_table::raw::get_geometry($hd->{file}) or log::l("An error occurred while getting the geometry of block device $hd->{file}: $!"), next;
add2hash_($hd, $h);
eval { partition_table::raw::test_for_bad_drives($hd) };
if (my $err = $@) {
if ($err =~ /write error:/) {
$hd->{readonly} = 1;
} else {
cdie $err if $err !~ /read error:/;
next;
}
}
if ($flags->{clearall} || member($hd->{device}, @{$flags->{clear} || []})) {
partition_table::raw::zero_MBR_and_dirty($hd);
} else {
eval {
partition_table::read($hd);
compare_with_proc_partitions($hd) if $::isInstall;
};
if (my $err = $@) {
if ($hd->{readonly}) {
use_proc_partitions($hd);
} elsif ($ask_before_blanking && $ask_before_blanking->($hd->{device}, $err)) {
partition_table::raw::zero_MBR($hd);
} else {
#- using it readonly
use_proc_partitions($hd);
}
}
member($_->{device}, @{$flags->{clear} || []}) and partition_table::remove($hd, $_)
foreach partition_table::get_normal_parts($hd);
}
# special case for Various type
$_->{type} = typeOfPart($_->{device}) || 0x100 foreach grep { $_->{type} == 0x100 } partition_table::get_normal_parts($hd);
#- special case for type overloading (eg: reiserfs is 0x183)
foreach (grep { isExt2($_) || $_->{type} == 0x7 } partition_table::get_normal_parts($hd)) {
my $type = typeOfPart($_->{device});
$_->{type} = $type if ($type & 0xff) == $_->{type} || $type && $hd->isa('partition_table::gpt');
}
push @hds, $hd;
}
#- detect raids before LVM allowing LVM on raid
my $raids = raids(\@hds);
my $all_hds = { %{ empty_all_hds() }, hds => \@hds, lvms => [], raids => $raids };
$all_hds->{lvms} = [ lvms($all_hds) ];
fs::get_major_minor(get_all_fstab($all_hds));
$all_hds;
}
sub get_hds {
#- $in is optional
my ($flags, $in) = @_;
if ($in) {
catch_cdie { hds($flags, sub {
my ($dev, $err) = @_;
$in->ask_yesorno(N("Error"),
N("I can't read the partition table of device %s, it's too corrupted for me :(
I can try to go on, erasing over bad partitions (ALL DATA will be lost!).
The other solution is to not allow DrakX to modify the partition table.
(the error is %s)
Do you agree to loose all the partitions?
", $dev, formatError($err)));
}) } sub { $in->ask_okcancel('', formatError($@)) };
} else {
catch_cdie { hds($flags) } sub { 1 }
}
}
sub read_proc_partitions_raw() {
my (undef, undef, @all) = cat_("/proc/partitions");
grep {
$_->{size} != 1 && # skip main extended partition
$_->{size} != 0x3fffffff # skip cdroms (otherwise stops cd-audios)
} map {
my %l;
@l{qw(major minor size dev)} = split;
\%l;
} @all;
}
sub read_proc_partitions {
my ($hds) = @_;
my @all = read_proc_partitions_raw();
my @parts = grep { $_->{dev} =~ /\d$/ } @all;
my @disks = grep { $_->{dev} !~ /\d$/ } @all;
my $devfs_like = any { $_->{dev} =~ m|/disc$| } @disks;
my %devfs2normal = map {
my (undef, $major, $minor) = devices::entry($_->{device});
my $disk = find { $_->{major} == $major && $_->{minor} == $minor } @disks;
$disk->{dev} => $_->{device};
} @$hds;
my $prev_part;
foreach my $part (@parts) {
my $dev;
if ($devfs_like) {
$dev = -e "/dev/$part->{dev}" ? $part->{dev} : sprintf("0x%x%02x", $part->{major}, $part->{minor});
$part->{rootDevice} = $devfs2normal{dirname($part->{dev}) . '/disc'};
} else {
$dev = $part->{dev};
foreach my $hd (@$hds) {
$part->{rootDevice} = $hd->{device} if $part->{dev} =~ /^$hd->{device}./;
}
}
$part->{device} = $dev;
$part->{size} *= 2; # from KB to sectors
$part->{type} = typeOfPart($dev);
$part->{start} = $prev_part ? $prev_part->{start} + $prev_part->{size} : 0;
$prev_part = $part;
delete $part->{dev}; # cleanup
}
@parts;
}
sub all_hds {
my ($all_hds) = @_;
(@{$all_hds->{hds}}, @{$all_hds->{lvms}});
}
sub part2hd {
my ($part, $all_hds) = @_;
my $hd = find { $part->{rootDevice} eq ($_->{device} || $_->{VG_name}) } all_hds($all_hds);
$hd;
}
sub is_same_hd {
my ($hd1, $hd2) = @_;
if ($hd1->{major} && $hd2->{major}) {
$hd1->{major} == $hd2->{major} && $hd1->{minor} == $hd2->{minor};
} elsif (my ($s1) = $hd1->{device} =~ m|https?://(.+?)/*$|) {
my ($s2) = $hd2->{device} =~ m|https?://(.+?)/*$|;
$s1 eq $s2;
} else {
$hd1->{device} eq $hd2->{device};
}
}
sub is_same_part {
my ($part1, $part2) = @_;
foreach ('start', 'size', 'type', 'rootDevice') {
$part1->{$_} eq $part2->{$_} or return;
}
1;
}
#- get all normal partition including special ones as found on sparc.
sub get_fstab {
map { partition_table::get_normal_parts($_) } @_;
}
#- get normal partition that should be visible for working on.
sub get_visible_fstab {
grep { $_ && !partition_table::isWholedisk($_) && !partition_table::isHiddenMacPart($_) }
map { partition_table::get_normal_parts($_) } @_;
}
sub get_fstab_and_holes {
map {
if (isLVM($_)) {
my @parts = partition_table::get_normal_parts($_);
my $free = $_->{totalsectors} - sum map { $_->{size} } @parts;
my $free_part = { start => 0, size => $free, type => 0, rootDevice => $_->{VG_name} };
@parts, if_($free >= $_->cylinder_size, $free_part);
} else {
partition_table::get_normal_parts_and_holes($_);
}
} @_;
}
sub get_holes {
grep { $_->{type} == 0 } get_fstab_and_holes(@_);
}
sub get_all_fstab {
my ($all_hds) = @_;
my @parts = map { partition_table::get_normal_parts($_) } all_hds($all_hds);
my @raids = grep { $_ } @{$all_hds->{raids}};
@parts, @raids, @{$all_hds->{loopbacks}};
}
sub get_really_all_fstab {
my ($all_hds) = @_;
my @parts = map { partition_table::get_normal_parts($_) } all_hds($all_hds);
my @raids = grep { $_ } @{$all_hds->{raids}};
@parts, @raids, @{$all_hds->{loopbacks}}, @{$all_hds->{raw_hds}}, @{$all_hds->{nfss}}, @{$all_hds->{smbs}}, @{$all_hds->{davs}};
}
sub get_all_fstab_and_holes {
my ($all_hds) = @_;
my @raids = grep { $_ } @{$all_hds->{raids}};
get_fstab_and_holes(all_hds($all_hds)), @raids, @{$all_hds->{loopbacks}};
}
sub get_all_holes {
my ($all_hds) = @_;
grep { $_->{type} == 0 } get_all_fstab_and_holes($all_hds);
}
sub all_free_space {
my ($all_hds) = @_;
sum map { $_->{size} } get_all_holes($all_hds);
}
sub free_space {
sum map { $_->{size} } get_holes(@_);
}
sub is_one_big_fat_or_NT {
my ($hds) = @_;
@$hds == 1 or return;
my @l = get_fstab(@$hds);
@l == 1 && isFat_or_NTFS($l[0]) && free_space(@$hds) < 10 << 11;
}
sub file2part {
my ($fstab, $file, $keep_simple_symlinks) = @_;
my $part;
$file = $keep_simple_symlinks ? common::expand_symlinks_but_simple("$::prefix$file") : expand_symlinks("$::prefix$file");
unless ($file =~ s/^$::prefix//) {
my $part = find { loopback::carryRootLoopback($_) } @$fstab or die;
log::l("found $part->{mntpoint}");
$file =~ s|/initrd/loopfs|$part->{mntpoint}|;
}
foreach (@$fstab) {
my $m = $_->{mntpoint};
$part = $_ if
$file =~ /^\Q$m/ &&
(!$part || length $part->{mntpoint} < length $m);
}
$part or die "file2part: not found $file";
$file =~ s|$part->{mntpoint}/?|/|;
($part, $file);
}
sub computeSize {
my ($part, $best, $all_hds, $suggestions) = @_;
my $max = $part->{maxsize} || $part->{size};
return min($max, $best->{size}) unless $best->{ratio};
my $free_space = all_free_space($all_hds);
my @l = my @L = grep {
if (!has_mntpoint($_->{mntpoint}, $all_hds) && $free_space >= $_->{size}) {
$free_space -= $_->{size};
1;
} else { 0 } } @$suggestions;
my $tot_ratios = 0;
while (1) {
my $old_free_space = $free_space;
my $old_tot_ratios = $tot_ratios;
$tot_ratios = sum(map { $_->{ratio} } @l);
last if $tot_ratios == $old_tot_ratios;
@l = grep {
if ($_->{ratio} && $_->{maxsize} && $tot_ratios &&
$_->{size} + $_->{ratio} / $tot_ratios * $old_free_space >= $_->{maxsize}) {
return min($max, $best->{maxsize}) if $best->{mntpoint} eq $_->{mntpoint};
$free_space -= $_->{maxsize} - $_->{size};
0;
} else {
$_->{ratio};
}
} @l;
}
my $size = int min($max, $best->{size} + $free_space * ($tot_ratios && $best->{ratio} / $tot_ratios));
#- verify other entry can fill the hole
(any { $_->{size} < $max - $size } @L) ? $size : $max;
}
sub suggest_part {
my ($part, $all_hds, $suggestions) = @_;
$suggestions ||= $suggestions{server} || $suggestions{simple};
my $has_swap = any { isSwap($_) } get_all_fstab($all_hds);
my ($best) =
grep { !$_->{maxsize} || $part->{size} <= $_->{maxsize} }
grep { $_->{size} <= ($part->{maxsize} || $part->{size}) }
grep { !has_mntpoint($_->{mntpoint}, $all_hds) || isSwap($_) && !$has_swap }
grep { !$_->{hd} || $_->{hd} eq $part->{rootDevice} }
grep { !$part->{type} || $part->{type} == $_->{type} || isTrueFS($part) && isTrueFS($_) }
@$suggestions or return;
defined $best or return; #- sorry no suggestion :(
$part->{mntpoint} = $best->{mntpoint};
$part->{type} = $best->{type} if !(isTrueFS($best) && isTrueFS($part));
$part->{size} = computeSize($part, $best, $all_hds, $suggestions);
$part->{options} = $best->{options} if $best->{options};
1;
}
sub suggestions_mntpoint {
my ($all_hds) = @_;
sort grep { !/swap/ && !has_mntpoint($_, $all_hds) }
(@suggestions_mntpoints, map { $_->{mntpoint} } @{$suggestions{server} || $suggestions{simple}});
}
sub mntpoint2part {
my ($mntpoint, $fstab) = @_;
find { $mntpoint eq $_->{mntpoint} } @$fstab;
}
sub has_mntpoint {
my ($mntpoint, $all_hds) = @_;
mntpoint2part($mntpoint, [ get_really_all_fstab($all_hds) ]);
}
sub get_root_ {
my ($fstab, $boot) = @_;
$boot && mntpoint2part("/boot", $fstab) || mntpoint2part("/", $fstab);
}
sub get_root { &get_root_ || {} }
#- do this before modifying $part->{type}
sub check_type {
my ($type, $_hd, $part) = @_;
isThisFs("jfs", { type => $type }) && $part->{size} < 16 << 11 and die \N("You can't use JFS for partitions smaller than 16MB");
isThisFs("reiserfs", { type => $type }) && $part->{size} < 32 << 11 and die \N("You can't use ReiserFS for partitions smaller than 32MB");
}
sub package_needed_for_partition_type {
my ($part) = @_;
my %l = (
reiserfs => 'reiserfsprogs',
xfs => 'xfsprogs',
jfs => 'jfsprogs',
);
$l{type2fs($part)};
}
#- do this before modifying $part->{mntpoint}
#- $part->{mntpoint} should not be used here, use $mntpoint instead
sub check_mntpoint {
my ($mntpoint, $hd, $part, $all_hds) = @_;
$mntpoint eq '' || isSwap($part) || isNonMountable($part) and return;
$mntpoint =~ m|^/| or die \N("Mount points must begin with a leading /");
$mntpoint =~ m|[\x7f-\xff]| and cdie \N("Mount points should contain only alphanumerical characters");
$mntpoint ne $part->{mntpoint} && has_mntpoint($mntpoint, $all_hds) and die \N("There is already a partition with mount point %s\n", $mntpoint);
cdie \N("You've selected a software RAID partition as root (/).
No bootloader is able to handle this without a /boot partition.
Please be sure to add a /boot partition") if $mntpoint eq "/" && isRAID($part) && !has_mntpoint("/boot", $all_hds);
die \N("You can't use a LVM Logical Volume for mount point %s", $mntpoint)
if $mntpoint eq '/boot' && isLVM($hd);
cdie \N("This directory should remain within the root filesystem")
if member($mntpoint, qw(/root));
die \N("This directory should remain within the root filesystem")
if member($mntpoint, qw(/bin /dev /etc /lib /sbin /mnt));
die \N("You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount point\n")
if !isTrueFS($part) && member($mntpoint, qw(/ /home /tmp /usr /var));
die \N("You can't use an encrypted file system for mount point %s", $mntpoint)
if $part->{options} =~ /encrypted/ && member($mntpoint, qw(/ /usr /var /boot));
local $part->{mntpoint} = $mntpoint;
loopback::check_circular_mounts($hd, $part, $all_hds);
}
sub add {
my ($hd, $part, $all_hds, $options) = @_;
isSwap($part) ?
($part->{mntpoint} = 'swap') :
$options->{force} || check_mntpoint($part->{mntpoint}, $hd, $part, $all_hds);
delete $part->{maxsize};
if (isLVM($hd)) {
lvm::lv_create($hd, $part);
} else {
partition_table::add($hd, $part, $options->{primaryOrExtended});
}
}
sub allocatePartitions {
my ($all_hds, $to_add) = @_;
foreach my $part_ (get_all_holes($all_hds)) {
my ($start, $size, $dev) = @$part_{"start", "size", "rootDevice"};
my $part;
while (suggest_part($part = { start => $start, size => 0, maxsize => $size, rootDevice => $dev },
$all_hds, $to_add)) {
my $hd = fsedit::part2hd($part, $all_hds);
add($hd, $part, $all_hds);
$size -= $part->{size} + $part->{start} - $start;
$start = $part->{start} + $part->{size};
}
}
}
sub auto_allocate {
my ($all_hds, $suggestions) = @_;
my $before = listlength(fsedit::get_all_fstab($all_hds));
my $suggestions_ = $suggestions || $suggestions{simple};
allocatePartitions($all_hds, $suggestions_);
if ($suggestions) {
auto_allocate_raids($all_hds, $suggestions);
if (auto_allocate_vgs($all_hds, $suggestions)) {
#- allocatePartitions needs to be called twice, once for allocating PVs, once for allocating LVs
my @vgs = map { $_->{VG_name} } @{$all_hds->{lvms}};
my @suggested_lvs = grep { member($_->{hd}, @vgs) } @$suggestions;
allocatePartitions($all_hds, \@suggested_lvs);
}
}
partition_table::assign_device_numbers($_) foreach @{$all_hds->{hds}};
if ($before == listlength(fsedit::get_all_fstab($all_hds))) {
# find out why auto_allocate failed
if (any { !has_mntpoint($_->{mntpoint}, $all_hds) } @$suggestions_) {
die \N("Not enough free space for auto-allocating");
} else {
die \N("Nothing to do");
}
}
}
sub auto_allocate_raids {
my ($all_hds, $suggestions) = @_;
my @raids = grep { isRawRAID($_) } get_all_fstab($all_hds) or return;
require raid;
my @mds = grep { $_->{hd} =~ /md/ } @$suggestions;
foreach my $md (@mds) {
my @raids_ = grep { !$md->{parts} || $md->{parts} =~ /\Q$_->{mntpoint}/ } @raids;
@raids = difference2(\@raids, \@raids_);
my $nb = raid::new($all_hds->{raids}, @raids_);
my $part = $all_hds->{raids}[$nb];
my %h = %$md;
delete @h{'hd', 'parts'};
put_in_hash($part, \%h); # mntpoint, level, chunk-size, type
raid::updateSize($part);
}
}
sub auto_allocate_vgs {
my ($all_hds, $suggestions) = @_;
my @pvs = grep { isRawLVM($_) } get_all_fstab($all_hds) or return;
my @vgs = grep { $_->{VG_name} } @$suggestions or return;
partition_table::write(@{$all_hds->{hds}});
require lvm;
foreach my $vg (@vgs) {
my $lvm = new lvm($vg->{VG_name});
push @{$all_hds->{lvms}}, $lvm;
my @pvs_ = grep { !$vg->{parts} || $vg->{parts} =~ /\Q$_->{mntpoint}/ } @pvs;
@pvs = difference2(\@pvs, \@pvs_);
foreach my $part (@pvs_) {
raid::make($all_hds->{raids}, $part) if isRAID($part);
$part->{lvm} = $lvm->{VG_name};
delete $part->{mntpoint};
lvm::vg_add($part);
push @{$lvm->{disks}}, $part;
}
lvm::update_size($lvm);
}
1;
}
sub undo_prepare {
my ($all_hds) = @_;
require Data::Dumper;
$Data::Dumper::Purity = 1;
foreach (@{$all_hds->{hds}}) {
my @h = @{$_}{@partition_table::fields2save};
push @{$_->{undo}}, Data::Dumper->Dump([\@h], ['$h']);
}
}
sub undo {
my ($all_hds) = @_;
foreach (@{$all_hds->{hds}}) {
my $h; eval pop @{$_->{undo}} || next;
@{$_}{@partition_table::fields2save} = @$h;
$_->{isDirty} = $_->{needKernelReread} = 1 if $_->{hasBeenDirty};
}
}
sub move {
my ($hd, $part, $hd2, $sector2) = @_;
die 'TODO'; # doesn't work for the moment
my $part1 = { %$part };
my $part2 = { %$part };
$part2->{start} = $sector2;
$part2->{size} += $hd2->cylinder_size() - 1;
partition_table::remove($hd, $part);
{
local ($part2->{notFormatted}, $part2->{isFormatted}); #- do not allow partition::add to change this
partition_table::add($hd2, $part2);
}
return if $part2->{notFormatted} && !$part2->{isFormatted} || $::testing;
local (*F, *G);
sysopen F, $hd->{file}, 0 or die '';
sysopen G, $hd2->{file}, 2 or die \N("Error opening %s for writing: %s", $hd2->{file}, $!);
my $base = $part1->{start};
my $base2 = $part2->{start};
my $step = 10;
if ($hd eq $hd2) {
$base == $base2 and return;
$step = min($step, abs($base2 - $base));
if ($base < $base2) {
$base += $part1->{size} - $step;
$base2 += $part1->{size} - $step;
$step = -$step;
}
}
my $f = sub {
$base < 0 and $base2 += -$base, $base = 0;
$base2 < 0 and $base += -$base2, $base2 = 0;
c::lseek_sector(fileno(F), $base, 0) or die "seeking to sector $base failed on drive $hd->{device}";
c::lseek_sector(fileno(G), $base2, 0) or die "seeking to sector $base2 failed on drive $hd2->{device}";
my $buf;
sysread F, $buf, $SECTORSIZE * abs($_[0]) or die '';
syswrite G, $buf;
};
for (my $i = 0; $i < $part1->{size} / abs($step); $i++, $base += $step, $base2 += $step) {
print "$base $base2\n";
&$f($step);
}
if (my $v = ($part1->{size} % abs($step)) * sign($step)) {
$base += $v;
$base2 += $v;
&$f($v);
}
}
sub change_type {
my ($type, $hd, $part) = @_;
$type != $part->{type} or return;
check_type($type, $hd, $part);
$hd->{isDirty} = 1;
$part->{mntpoint} = '' if isSwap($part) && $part->{mntpoint} eq "swap";
$part->{mntpoint} = '' if isRawLVM({ type => $type }) || isRawRAID({ type => $type });
$part->{type} = $type;
$part->{notFormatted} = 1;
$part->{isFormatted} = 0;
}
sub rescuept($) {
my ($hd) = @_;
my ($ext, @hd);
my $dev = devices::make($hd->{device});
open(my $F, "rescuept $dev|");
local $_;
while (<$F>) {
my ($st, $si, $id) = /start=\s*(\d+),\s*size=\s*(\d+),\s*Id=\s*(\d+)/ or next;
my $part = { start => $st, size => $si, type => hex($id) };
if (isExtended($part)) {
$ext = $part;
} else {
push @hd, $part;
}
}
close $F or die "rescuept failed";
partition_table::raw::zero_MBR($hd);
foreach (@hd) {
my $b = partition_table::verifyInside($_, $ext);
if ($b) {
$_->{start}--;
$_->{size}++;
}
local $_->{notFormatted};
partition_table::add($hd, $_, ($b ? 'Extended' : 'Primary'), 1);
}
}
sub compare_with_proc_partitions {
my ($hd) = @_;
my @l1 = partition_table::get_normal_parts($hd);
my @l2 = grep { $_->{rootDevice} eq $hd->{device} } read_proc_partitions([$hd]);
#- /proc/partitions includes partition with type "empty" and a non-null size
#- so add them for comparison
my ($len1, $len2) = (int(@l1) + $hd->{primary}{nb_special_empty}, int(@l2));
if ($len1 != $len2 && arch() ne 'ppc') {
die sprintf(
"/proc/partitions doesn't agree with drakx %d != %d:\n%s\n", $len1, $len2,
"/proc/partitions: " . join(", ", map { "$_->{device} ($_->{rootDevice})" } @l2));
}
$len2;
}
sub use_proc_partitions {
my ($hd) = @_;
log::l("using /proc/partitions since diskdrake failed :(");
partition_table::raw::zero_MBR($hd);
$hd->{readonly} = 1;
$hd->{getting_rid_of_readonly_allowed} = 1;
$hd->{primary} = { normal => [ grep { $_->{rootDevice} eq $hd->{device} } read_proc_partitions([$hd]) ] };
}
1;
href='#n566'>566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
2266
2267
2268
2269
2270
2271
2272
2273
2274
2275
2276
2277
2278
2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
2291
2292
2293
2294
2295
2296
2297
2298
2299
2300
2301
2302
2303
2304
2305
2306
2307
2308
2309
2310
2311
2312
2313
2314
2315
2316
2317
2318
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328
2329
2330
2331
2332
2333
2334
2335
2336
2337
2338
2339
2340
2341
2342
2343
2344
2345
2346
2347
2348
2349
2350
2351
2352
2353
2354
2355
2356
2357
2358
2359
2360
2361
2362
2363
2364
2365
2366
2367
2368
2369
2370
2371
2372
2373
2374
2375
2376
2377
2378
2379
2380
2381
2382
2383
2384
2385
2386
2387
2388
2389
2390
2391
2392
2393
2394
2395
2396
2397
2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
2418
2419
2420
2421
2422
2423
2424
2425
2426
2427
2428
2429
2430
2431
2432
2433
2434
2435
2436
2437
2438
2439
2440
2441
2442
2443
2444
2445
2446
2447
2448
2449
2450
2451
2452
2453
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
2468
2469
2470
2471
2472
2473
2474
2475
2476
2477
2478
2479
2480
2481
2482
2483
2484
2485
2486
2487
2488
2489
2490
2491
2492
2493
2494
2495
2496
2497
2498
2499
2500
2501
2502
2503
2504
2505
2506
2507
2508
2509
2510
2511
2512
2513
2514
2515
2516
2517
2518
2519
2520
2521
2522
2523
2524
2525
2526
2527
2528
2529
2530
2531
2532
2533
2534
2535
2536
2537
2538
2539
2540
2541
2542
2543
2544
2545
2546
2547
2548
2549
2550
2551
2552
2553
2554
2555
2556
2557
2558
2559
2560
2561
2562
2563
2564
2565
2566
2567
2568
2569
2570
2571
2572
2573
2574
2575
2576
2577
2578
2579
2580
2581
2582
2583
2584
2585
2586
2587
2588
2589
2590
2591
2592
2593
2594
2595
2596
2597
2598
2599
2600
2601
2602
2603
2604
2605
2606
2607
2608
2609
2610
2611
2612
2613
2614
2615
2616
2617
2618
2619
2620
2621
2622
2623
2624
2625
2626
2627
2628
2629
2630
2631
2632
2633
2634
2635
2636
2637
2638
2639
2640
2641
2642
2643
2644
2645
2646
2647
2648
2649
2650
2651
2652
2653
2654
2655
2656
2657
2658
2659
2660
2661
2662
2663
2664
2665
2666
2667
2668
2669
2670
2671
2672
2673
2674
2675
2676
2677
2678
2679
2680
2681
2682
2683
2684
2685
2686
2687
2688
2689
2690
2691
2692
2693
2694
2695
2696
2697
2698
2699
2700
2701
2702
2703
2704
2705
2706
2707
2708
2709
2710
2711
2712
2713
2714
2715
2716
2717
2718
2719
2720
2721
2722
2723
2724
2725
2726
2727
2728
2729
2730
2731
2732
2733
2734
2735
2736
2737
2738
2739
2740
2741
2742
2743
2744
2745
2746
2747
2748
2749
2750
2751
2752
2753
2754
2755
2756
2757
2758
2759
2760
2761
2762
2763
2764
2765
2766
2767
2768
2769
2770
2771
2772
2773
2774
2775
2776
2777
2778
2779
2780
2781
2782
2783
2784
2785
2786
2787
2788
2789
2790
2791
2792
2793
2794
2795
2796
2797
2798
2799
2800
2801
2802
2803
2804
2805
2806
2807
2808
2809
2810
2811
2812
2813
2814
2815
2816
2817
2818
2819
2820
2821
2822
2823
2824
2825
2826
2827
2828
2829
2830
2831
2832
2833
2834
2835
2836
2837
2838
2839
2840
2841
2842
2843
2844
2845
2846
2847
2848
2849
2850
2851
2852
2853
2854
2855
2856
2857
2858
2859
2860
2861
2862
2863
2864
2865
2866
2867
2868
2869
2870
2871
2872
2873
2874
2875
2876
2877
2878
2879
2880
2881
2882
2883
2884
2885
2886
2887
2888
2889
2890
2891
2892
2893
2894
2895
2896
2897
2898
2899
2900
2901
2902
2903
2904
2905
2906
2907
2908
2909
2910
2911
2912
2913
2914
2915
2916
2917
2918
2919
2920
2921
2922
2923
2924
2925
2926
2927
2928
2929
2930
2931
2932
2933
2934
2935
2936
2937
2938
2939
2940
2941
2942
2943
2944
2945
2946
2947
2948
2949
2950
2951
2952
2953
2954
2955
2956
2957
2958
2959
2960
2961
2962
2963
2964
2965
2966
2967
2968
2969
2970
2971
2972
2973
2974
2975
2976
2977
2978
2979
2980
2981
2982
2983
2984
2985
2986
2987
2988
2989
2990
2991
2992
2993
2994
2995
2996
2997
2998
2999
3000
3001
3002
3003
3004
3005
3006
3007
3008
3009
3010
3011
3012
3013
3014
3015
3016
3017
3018
3019
3020
3021
3022
3023
3024
3025
3026
3027
3028
3029
3030
3031
3032
3033
3034
3035
3036
3037
3038
3039
3040
3041
3042
3043
3044
3045
3046
3047
3048
3049
3050
3051
3052
3053
3054
3055
3056
3057
3058
3059
3060
3061
3062
3063
3064
3065
3066
3067
3068
3069
3070
3071
3072
3073
3074
3075
3076
3077
3078
3079
3080
3081
3082
3083
3084
3085
3086
3087
3088
3089
3090
3091
3092
3093
3094
3095
3096
3097
3098
3099
3100
3101
3102
3103
3104
3105
3106
3107
3108
3109
3110
3111
3112
3113
3114
3115
3116
3117
3118
3119
3120
3121
3122
3123
3124
3125
3126
3127
3128
3129
3130
3131
3132
3133
3134
3135
3136
3137
3138
3139
3140
3141
3142
3143
3144
3145
3146
3147
3148
3149
3150
3151
3152
3153
3154
3155
3156
3157
3158
3159
3160
3161
3162
3163
3164
3165
3166
3167
3168
3169
3170
3171
3172
3173
3174
3175
3176
3177
3178
3179
3180
3181
3182
3183
3184
3185
3186
3187
3188
3189
3190
3191
3192
3193
3194
3195
3196
3197
3198
3199
3200
3201
3202
3203
3204
3205
3206
3207
3208
3209
3210
3211
3212
3213
3214
3215
3216
3217
3218
3219
3220
3221
3222
3223
3224
3225
3226
3227
3228
3229
3230
3231
3232
3233
3234
3235
3236
3237
3238
3239
3240
3241
3242
3243
3244
3245
3246
3247
3248
3249
3250
3251
3252
3253
3254
3255
3256
3257
3258
3259
3260
3261
3262
3263
3264
3265
3266
3267
3268
3269
3270
3271
3272
3273
3274
3275
3276
3277
3278
3279
3280
3281
3282
3283
3284
3285
3286
3287
3288
3289
3290
3291
3292
3293
3294
3295
3296
3297
3298
3299
3300
3301
3302
3303
3304
3305
3306
3307
3308
3309
3310
3311
3312
3313
3314
3315
3316
3317
3318
3319
3320
3321
3322
3323
3324
3325
3326
3327
3328
3329
3330
3331
3332
3333
3334
3335
3336
3337
3338
3339
3340
3341
3342
3343
3344
3345
3346
3347
3348
3349
3350
3351
3352
3353
3354
3355
3356
3357
3358
3359
3360
3361
3362
3363
3364
3365
3366
3367
3368
3369
3370
3371
3372
3373
3374
3375
3376
3377
3378
3379
3380
3381
3382
3383
3384
3385
3386
3387
3388
3389
3390
3391
3392
3393
3394
3395
3396
3397
3398
3399
3400
3401
3402
3403
3404
3405
3406
3407
3408
3409
3410
3411
3412
3413
3414
3415
3416
3417
3418
3419
3420
3421
3422
3423
3424
3425
3426
3427
3428
3429
3430
3431
3432
3433
3434
3435
3436
3437
3438
3439
3440
3441
3442
3443
3444
3445
3446
3447
3448
3449
3450
3451
3452
3453
3454
3455
3456
3457
3458
3459
3460
3461
3462
3463
3464
3465
3466
3467
3468
3469
3470
3471
3472
3473
3474
3475
3476
3477
3478
3479
3480
3481
3482
3483
3484
3485
3486
3487
3488
3489
3490
3491
3492
3493
3494
3495
3496
3497
3498
3499
3500
3501
3502
3503
3504
3505
3506
3507
3508
3509
3510
3511
3512
3513
3514
3515
3516
3517
3518
3519
3520
3521
3522
3523
3524
3525
3526
3527
3528
3529
3530
3531
3532
3533
3534
3535
3536
3537
3538
3539
3540
3541
3542
3543
3544
3545
3546
3547
3548
3549
3550
3551
3552
3553
3554
3555
3556
3557
3558
3559
3560
3561
3562
3563
3564
3565
3566
3567
3568
3569
3570
3571
3572
3573
3574
3575
3576
3577
3578
3579
3580
3581
3582
3583
3584
3585
3586
3587
3588
3589
3590
3591
3592
3593
3594
3595
3596
3597
3598
3599
3600
3601
3602
3603
3604
3605
3606
3607
3608
3609
3610
3611
3612
3613
3614
3615
3616
3617
3618
3619
3620
3621
3622
3623
3624
3625
3626
3627
3628
3629
3630
3631
3632
3633
3634
3635
3636
3637
3638
3639
3640
3641
3642
3643
3644
3645
3646
3647
3648
3649
3650
3651
3652
3653
3654
3655
3656
3657
3658
3659
3660
3661
3662
3663
3664
3665
3666
3667
3668
3669
3670
3671
3672
3673
3674
3675
3676
3677
3678
3679
3680
3681
3682
3683
3684
3685
3686
3687
3688
3689
3690
3691
3692
3693
3694
3695
3696
3697
3698
3699
3700
3701
3702
3703
3704
3705
3706
3707
3708
3709
3710
3711
3712
3713
3714
3715
3716
3717
3718
3719
3720
3721
3722
3723
3724
3725
3726
3727
3728
3729
3730
3731
3732
3733
3734
3735
3736
3737
3738
3739
3740
3741
3742
3743
3744
3745
3746
3747
3748
3749
3750
3751
3752
3753
3754
3755
3756
3757
3758
3759
3760
3761
3762
3763
3764
3765
3766
3767
3768
3769
3770
3771
3772
3773
3774
3775
3776
3777
3778
3779
3780
3781
3782
3783
3784
3785
3786
3787
3788
3789
3790
3791
3792
3793
3794
3795
3796
3797
3798
3799
3800
3801
3802
3803
3804
3805
3806
3807
3808
3809
3810
3811
3812
3813
3814
3815
3816
3817
3818
3819
3820
3821
3822
3823
3824
3825
3826
3827
3828
3829
3830
3831
3832
3833
3834
3835
3836
3837
3838
3839
3840
3841
3842
3843
3844
3845
3846
3847
3848
3849
3850
3851
3852
3853
3854
3855
3856
3857
3858
3859
3860
3861
3862
3863
3864
3865
3866
3867
3868
3869
3870
3871
3872
3873
3874
3875
3876
3877
3878
3879
3880
3881
3882
3883
3884
3885
3886
3887
3888
3889
3890
3891
3892
3893
3894
3895
3896
3897
3898
3899
3900
3901
3902
3903
3904
3905
3906
3907
3908
3909
3910
3911
3912
3913
3914
3915
3916
3917
3918
3919
3920
3921
3922
3923
3924
3925
3926
3927
3928
3929
3930
3931
3932
3933
3934
3935
3936
3937
3938
3939
3940
3941
3942
3943
3944
3945
3946
3947
3948
3949
3950
3951
3952
3953
3954
3955
3956
3957
3958
3959
3960
3961
3962
3963
3964
3965
3966
3967
3968
3969
3970
3971
3972
3973
3974
3975
3976
3977
3978
3979
3980
3981
3982
3983
3984
3985
3986
3987
3988
3989
3990
3991
3992
3993
3994
3995
3996
3997
3998
3999
4000
4001
4002
4003
4004
4005
4006
4007
4008
4009
4010
4011
4012
4013
4014
4015
4016
4017
4018
4019
4020
4021
4022
4023
4024
4025
4026
4027
4028
4029
4030
4031
4032
4033
4034
4035
4036
4037
4038
4039
4040
4041
4042
4043
4044
4045
4046
4047
4048
4049
4050
4051
4052
4053
4054
4055
4056
4057
4058
4059
4060
4061
4062
4063
4064
4065
4066
4067
4068
4069
4070
4071
4072
4073
4074
4075
4076
4077
4078
4079
4080
4081
4082
4083
4084
4085
4086
4087
4088
4089
4090
4091
4092
4093
4094
4095
4096
4097
4098
4099
4100
4101
4102
4103
4104
4105
4106
4107
4108
4109
4110
4111
4112
4113
4114
4115
4116
4117
4118
4119
4120
4121
4122
4123
4124
4125
4126
4127
4128
4129
4130
4131
4132
4133
4134
4135
4136
4137
4138
4139
4140
4141
4142
4143
4144
4145
4146
4147
4148
4149
4150
4151
4152
4153
4154
4155
4156
4157
4158
4159
4160
4161
4162
4163
4164
4165
4166
4167
4168
4169
4170
4171
4172
4173
4174
4175
4176
4177
4178
4179
4180
4181
4182
4183
4184
4185
4186
4187
4188
4189
4190
4191
4192
4193
4194
4195
4196
4197
4198
4199
4200
4201
4202
4203
4204
4205
4206
4207
4208
4209
4210
4211
4212
4213
4214
4215
4216
4217
4218
4219
4220
4221
4222
4223
4224
4225
4226
4227
4228
4229
4230
4231
4232
4233
4234
4235
4236
4237
4238
4239
4240
4241
4242
4243
4244
4245
4246
4247
4248
4249
4250
4251
4252
4253
4254
4255
4256
4257
4258
4259
4260
4261
4262
4263
4264
4265
4266
4267
4268
4269
4270
4271
4272
4273
4274
4275
4276
4277
4278
4279
4280
4281
4282
4283
4284
4285
4286
4287
4288
4289
4290
4291
4292
4293
4294
4295
4296
4297
4298
4299
4300
4301
4302
4303
4304
4305
4306
4307
4308
4309
4310
4311
4312
4313
4314
4315
4316
4317
4318
4319
4320
4321
4322
4323
4324
4325
4326
4327
4328
4329
4330
4331
4332
4333
4334
4335
4336
4337
4338
4339
4340
4341
4342
4343
4344
4345
4346
4347
4348
4349
4350
4351
4352
4353
4354
4355
4356
4357
4358
4359
4360
4361
4362
4363
4364
4365
4366
4367
4368
4369
4370
4371
4372
4373
4374
4375
4376
4377
4378
4379
4380
4381
4382
4383
4384
4385
4386
4387
4388
4389
4390
4391
4392
4393
4394
4395
4396
4397
4398
4399
4400
4401
4402
4403
4404
4405
4406
4407
4408
4409
4410
4411
4412
4413
4414
4415
4416
4417
4418
4419
4420
4421
4422
4423
4424
4425
4426
4427
4428
4429
4430
4431
4432
4433
4434
4435
4436
4437
4438
4439
4440
4441
4442
4443
4444
4445
4446
4447
4448
4449
4450
4451
4452
4453
4454
4455
4456
4457
4458
4459
4460
4461
4462
4463
4464
4465
4466
4467
4468
4469
4470
4471
4472
4473
4474
4475
4476
4477
4478
4479
4480
4481
4482
4483
4484
4485
4486
4487
4488
4489
4490
4491
4492
4493
4494
4495
4496
4497
4498
4499
4500
4501
4502
4503
4504
4505
4506
4507
4508
4509
4510
4511
4512
4513
4514
4515
4516
4517
4518
4519
4520
4521
4522
4523
4524
4525
4526
4527
4528
4529
4530
4531
4532
4533
4534
4535
4536
4537
4538
4539
4540
4541
4542
4543
4544
4545
4546
4547
4548
4549
4550
4551
4552
4553
4554
4555
4556
4557
4558
4559
4560
4561
4562
4563
4564
4565
4566
4567
4568
4569
4570
4571
4572
4573
4574
4575
4576
4577
4578
4579
4580
4581
4582
4583
4584
4585
4586
4587
4588
4589
4590
4591
4592
4593
4594
4595
4596
4597
4598
4599
4600
4601
4602
4603
4604
4605
4606
4607
4608
4609
4610
4611
4612
4613
4614
4615
4616
4617
4618
4619
4620
4621
4622
4623
4624
4625
4626
4627
4628
4629
4630
4631
4632
4633
4634
4635
4636
4637
4638
4639
4640
4641
4642
4643
4644
4645
4646
4647
4648
4649
4650
4651
4652
4653
4654
4655
4656
4657
4658
4659
4660
4661
4662
4663
4664
4665
4666
4667
4668
4669
4670
4671
4672
4673
4674
4675
4676
4677
4678
4679
4680
4681
4682
4683
4684
4685
4686
4687
4688
4689
4690
4691
4692
4693
4694
4695
4696
4697
4698
4699
4700
4701
4702
4703
4704
4705
4706
4707
4708
4709
4710
4711
4712
4713
4714
4715
4716
4717
4718
4719
4720
4721
4722
4723
4724
4725
4726
4727
4728
4729
4730
4731
4732
4733
4734
4735
4736
4737
4738
4739
4740
4741
4742
4743
4744
4745
4746
4747
4748
4749
4750
4751
4752
4753
4754
4755
4756
4757
4758
4759
4760
4761
4762
4763
4764
4765
4766
4767
4768
4769
4770
4771
4772
4773
4774
4775
4776
4777
4778
4779
4780
4781
4782
4783
4784
4785
4786
4787
4788
4789
4790
4791
4792
4793
4794
4795
4796
4797
4798
4799
4800
4801
4802
4803
4804
4805
4806
4807
4808
4809
4810
4811
4812
4813
4814
4815
4816
4817
4818
4819
4820
4821
4822
4823
4824
4825
4826
4827
4828
4829
4830
4831
4832
4833
4834
4835
4836
4837
4838
4839
4840
4841
4842
4843
4844
4845
4846
4847
4848
4849
4850
4851
4852
4853
4854
4855
4856
4857
4858
4859
4860
4861
4862
4863
4864
4865
4866
4867
4868
4869
4870
4871
4872
4873
4874
4875
4876
4877
4878
4879
4880
4881
4882
4883
4884
4885
4886
4887
4888
4889
4890
4891
4892
4893
4894
4895
4896
4897
4898
4899
4900
4901
4902
4903
4904
4905
4906
4907
4908
4909
4910
4911
4912
4913
4914
4915
4916
4917
4918
4919
4920
4921
4922
4923
4924
4925
4926
4927
4928
4929
4930
4931
4932
4933
4934
4935
4936
4937
4938
4939
4940
4941
4942
4943
4944
4945
4946
4947
4948
4949
4950
4951
4952
4953
4954
4955
4956
4957
4958
4959
4960
4961
4962
4963
4964
4965
4966
4967
4968
4969
4970
4971
4972
4973
4974
4975
4976
4977
4978
4979
4980
4981
4982
4983
4984
4985
4986
4987
4988
4989
4990
4991
4992
4993
4994
4995
4996
4997
4998
4999
5000
5001
5002
5003
5004
5005
5006
5007
5008
5009
5010
5011
5012
5013
5014
5015
5016
5017
5018
5019
5020
5021
5022
5023
5024
5025
5026
5027
5028
5029
5030
5031
5032
5033
5034
5035
5036
5037
5038
5039
5040
5041
5042
5043
5044
5045
5046
5047
5048
5049
5050
5051
5052
5053
5054
5055
5056
5057
5058
5059
5060
5061
5062
5063
5064
5065
5066
5067
5068
5069
5070
5071
5072
5073
5074
5075
5076
5077
5078
5079
5080
5081
5082
5083
5084
5085
5086
5087
5088
5089
5090
5091
5092
5093
5094
5095
5096
5097
5098
5099
5100
5101
5102
5103
5104
5105
5106
5107
5108
5109
5110
5111
5112
5113
5114
5115
5116
5117
5118
5119
5120
5121
5122
5123
5124
5125
5126
5127
5128
5129
5130
5131
5132
5133
5134
5135
5136
5137
5138
5139
5140
5141
5142
5143
5144
5145
5146
5147
5148
5149
5150
5151
5152
5153
5154
5155
5156
5157
5158
5159
5160
5161
5162
5163
5164
5165
5166
5167
5168
5169
5170
5171
5172
5173
5174
5175
5176
5177
5178
5179
5180
5181
5182
5183
5184
5185
5186
5187
5188
5189
5190
5191
5192
5193
5194
5195
5196
5197
5198
5199
5200
5201
5202
5203
5204
5205
5206
5207
5208
5209
5210
5211
5212
5213
5214
5215
5216
5217
5218
5219
5220
5221
5222
5223
5224
5225
5226
5227
5228
5229
5230
5231
5232
5233
5234
5235
5236
5237
5238
5239
5240
5241
5242
5243
5244
5245
5246
5247
5248
5249
5250
5251
5252
5253
5254
5255
5256
5257
5258
5259
5260
5261
5262
5263
5264
5265
5266
5267
5268
5269
5270
5271
5272
5273
5274
5275
5276
5277
5278
5279
5280
5281
5282
5283
5284
5285
5286
5287
5288
5289
5290
5291
5292
5293
5294
5295
5296
5297
5298
5299
5300
5301
5302
5303
5304
5305
5306
5307
5308
5309
5310
5311
5312
5313
5314
5315
5316
5317
5318
5319
5320
5321
5322
5323
5324
5325
5326
5327
5328
5329
5330
5331
5332
5333
5334
5335
5336
5337
5338
5339
5340
5341
5342
5343
5344
5345
5346
5347
5348
5349
5350
5351
5352
5353
5354
5355
5356
5357
5358
5359
5360
5361
5362
5363
5364
5365
5366
5367
5368
5369
5370
5371
5372
5373
5374
5375
5376
5377
5378
5379
5380
5381
5382
5383
5384
5385
5386
5387
5388
5389
5390
5391
5392
5393
5394
5395
5396
5397
5398
5399
5400
5401
5402
5403
5404
5405
5406
5407
5408
5409
5410
5411
5412
5413
5414
5415
5416
5417
5418
5419
5420
5421
5422
5423
5424
5425
5426
5427
5428
5429
5430
5431
5432
5433
5434
5435
5436
5437
5438
5439
5440
5441
5442
5443
5444
5445
5446
5447
5448
5449
5450
5451
5452
5453
5454
5455
5456
5457
5458
5459
5460
5461
5462
5463
5464
5465
5466
5467
5468
5469
5470
5471
5472
5473
5474
5475
5476
5477
5478
5479
5480
5481
5482
5483
5484
5485
5486
5487
5488
5489
5490
5491
5492
5493
5494
5495
5496
5497
5498
5499
5500
5501
5502
5503
5504
5505
5506
5507
5508
5509
5510
5511
5512
5513
5514
5515
5516
5517
5518
5519
5520
5521
5522
5523
5524
5525
5526
5527
5528
5529
5530
5531
5532
5533
5534
5535
5536
5537
5538
5539
5540
5541
5542
5543
5544
5545
5546
5547
5548
5549
5550
5551
5552
5553
5554
5555
5556
5557
5558
5559
5560
5561
5562
5563
5564
5565
5566
5567
5568
5569
5570
5571
5572
5573
5574
5575
5576
5577
5578
5579
5580
5581
5582
5583
5584
5585
5586
5587
5588
5589
5590
5591
5592
5593
5594
5595
5596
5597
5598
5599
5600
5601
5602
5603
5604
5605
5606
5607
5608
5609
5610
5611
5612
5613
5614
5615
5616
5617
5618
5619
5620
5621
5622
5623
5624
5625
5626
5627
5628
5629
5630
5631
5632
5633
5634
5635
5636
5637
5638
5639
5640
5641
5642
5643
5644
5645
5646
5647
5648
5649
5650
5651
5652
5653
5654
5655
5656
5657
5658
5659
5660
5661
5662
5663
5664
5665
5666
5667
5668
5669
5670
5671
5672
5673
5674
5675
5676
5677
5678
5679
5680
5681
5682
5683
5684
5685
5686
5687
5688
5689
5690
5691
5692
5693
5694
5695
5696
5697
5698
5699
5700
5701
5702
5703
5704
5705
5706
5707
5708
5709
5710
5711
5712
5713
5714
5715
5716
5717
5718
5719
5720
5721
5722
5723
5724
5725
5726
5727
5728
5729
5730
5731
5732
5733
5734
5735
5736
5737
5738
5739
5740
5741
5742
5743
5744
5745
5746
5747
5748
5749
5750
5751
5752
5753
5754
5755
5756
5757
5758
5759
5760
5761
5762
5763
5764
5765
5766
5767
5768
5769
5770
5771
5772
5773
5774
5775
5776
5777
5778
5779
5780
5781
5782
5783
5784
5785
5786
5787
5788
5789
5790
5791
5792
5793
5794
5795
5796
5797
5798
5799
5800
5801
5802
5803
5804
5805
5806
5807
5808
5809
5810
5811
5812
5813
5814
5815
5816
5817
5818
5819
5820
5821
5822
5823
5824
5825
5826
5827
5828
5829
5830
5831
5832
5833
5834
5835
5836
5837
5838
5839
5840
5841
5842
5843
5844
5845
5846
5847
5848
5849
5850
5851
5852
5853
5854
5855
5856
5857
5858
5859
5860
5861
5862
5863
5864
5865
5866
5867
5868
5869
5870
5871
5872
5873
5874
5875
5876
5877
5878
5879
5880
5881
5882
5883
5884
5885
5886
5887
5888
5889
5890
5891
5892
5893
5894
5895
5896
5897
5898
5899
5900
5901
5902
5903
5904
5905
5906
5907
5908
5909
5910
5911
5912
5913
5914
5915
5916
5917
5918
5919
5920
5921
5922
5923
5924
5925
5926
5927
5928
5929
5930
5931
5932
5933
5934
5935
5936
5937
5938
5939
5940
5941
5942
5943
5944
5945
5946
5947
5948
5949
5950
5951
5952
5953
5954
5955
5956
5957
5958
5959
5960
5961
5962
5963
5964
5965
5966
5967
5968
5969
5970
5971
5972
5973
5974
5975
5976
5977
5978
5979
5980
5981
5982
5983
5984
5985
5986
5987
5988
5989
5990
5991
5992
5993
5994
5995
5996
5997
5998
5999
6000
6001
6002
6003
6004
6005
6006
6007
6008
6009
6010
6011
6012
6013
6014
6015
6016
6017
6018
6019
6020
6021
6022
6023
6024
6025
6026
6027
6028
6029
6030
6031
6032
6033
6034
6035
6036
6037
6038
6039
6040
6041
6042
6043
6044
6045
6046
6047
6048
6049
6050
6051
6052
6053
6054
6055
6056
6057
6058
6059
6060
6061
6062
6063
6064
6065
6066
6067
6068
6069
6070
6071
6072
6073
6074
6075
6076
6077
6078
6079
6080
6081
6082
6083
6084
6085
6086
6087
6088
6089
6090
6091
6092
6093
6094
6095
6096
6097
6098
6099
6100
6101
6102
6103
6104
6105
6106
6107
6108
6109
6110
6111
6112
6113
6114
6115
6116
6117
6118
6119
6120
6121
6122
6123
6124
6125
6126
6127
6128
6129
6130
6131
6132
6133
6134
6135
6136
6137
6138
6139
6140
6141
6142
6143
6144
6145
6146
6147
6148
6149
6150
6151
6152
6153
6154
6155
6156
6157
6158
6159
6160
6161
6162
6163
6164
6165
6166
6167
6168
6169
6170
6171
6172
6173
6174
6175
6176
6177
6178
6179
6180
6181
6182
6183
6184
6185
6186
6187
6188
6189
6190
6191
6192
6193
6194
6195
6196
6197
6198
6199
6200
6201
6202
6203
6204
6205
6206
6207
6208
6209
6210
6211
6212
6213
6214
6215
6216
6217
6218
6219
6220
6221
6222
6223
6224
6225
6226
6227
6228
6229
6230
6231
6232
6233
6234
6235
6236
6237
6238
6239
6240
6241
6242
6243
6244
6245
6246
6247
6248
6249
6250
6251
6252
6253
6254
6255
6256
6257
6258
6259
6260
6261
6262
6263
6264
6265
6266
6267
6268
6269
6270
6271
6272
6273
6274
6275
6276
6277
6278
6279
6280
6281
6282
6283
6284
6285
6286
6287
6288
6289
6290
6291
6292
6293
6294
6295
6296
6297
6298
6299
6300
6301
6302
6303
6304
6305
6306
6307
6308
6309
6310
6311
6312
6313
6314
6315
6316
6317
6318
6319
6320
6321
6322
6323
6324
6325
6326
6327
6328
6329
6330
6331
6332
6333
6334
6335
6336
6337
6338
6339
6340
6341
6342
6343
6344
6345
6346
6347
6348
6349
6350
6351
6352
6353
6354
6355
6356
6357
6358
6359
6360
6361
6362
6363
6364
6365
6366
6367
6368
6369
6370
6371
6372
6373
6374
6375
6376
6377
6378
6379
6380
6381
6382
6383
6384
6385
6386
6387
6388
6389
6390
6391
6392
6393
6394
6395
6396
6397
6398
6399
6400
6401
6402
6403
6404
6405
6406
6407
6408
6409
6410
6411
6412
6413
6414
6415
6416
6417
6418
6419
6420
6421
6422
6423
6424
6425
6426
6427
6428
6429
6430
6431
6432
6433
6434
6435
6436
6437
6438
6439
6440
6441
6442
6443
6444
6445
6446
6447
6448
6449
6450
6451
6452
6453
6454
6455
6456
6457
6458
6459
6460
6461
6462
6463
6464
6465
6466
6467
6468
6469
6470
6471
6472
6473
6474
6475
6476
6477
6478
6479
6480
6481
6482
6483
6484
6485
6486
6487
6488
6489
6490
6491
6492
6493
6494
6495
6496
6497
6498
6499
6500
6501
6502
6503
6504
6505
6506
6507
6508
6509
6510
6511
6512
6513
6514
6515
6516
6517
6518
6519
6520
6521
6522
6523
6524
6525
6526
6527
6528
6529
6530
6531
6532
6533
6534
6535
6536
6537
6538
6539
6540
6541
6542
6543
6544
6545
6546
6547
6548
6549
6550
6551
6552
6553
6554
6555
6556
6557
6558
6559
6560
6561
6562
6563
6564
6565
6566
6567
6568
6569
6570
6571
6572
6573
6574
6575
6576
6577
6578
6579
6580
6581
6582
6583
6584
6585
6586
6587
6588
6589
6590
6591
6592
6593
6594
6595
6596
6597
6598
6599
6600
6601
6602
6603
6604
6605
6606
6607
6608
6609
6610
6611
6612
6613
6614
6615
6616
6617
6618
6619
6620
6621
6622
6623
6624
6625
6626
6627
6628
6629
6630
6631
6632
6633
6634
6635
6636
6637
6638
6639
6640
6641
6642
6643
6644
6645
6646
6647
6648
6649
6650
6651
6652
6653
6654
6655
6656
6657
6658
6659
6660
6661
6662
6663
6664
6665
6666
6667
6668
6669
6670
6671
6672
6673
6674
6675
6676
6677
6678
6679
6680
6681
6682
6683
6684
6685
6686
6687
6688
6689
6690
6691
6692
6693
6694
6695
6696
6697
6698
6699
6700
6701
6702
6703
6704
6705
6706
6707
6708
6709
6710
6711
6712
6713
6714
6715
6716
6717
6718
6719
6720
6721
6722
6723
6724
6725
6726
6727
6728
6729
6730
6731
6732
6733
6734
6735
6736
6737
6738
6739
6740
6741
6742
6743
6744
6745
6746
6747
6748
6749
6750
6751
6752
6753
6754
6755
6756
6757
6758
6759
6760
6761
6762
6763
6764
6765
6766
6767
6768
6769
6770
6771
6772
6773
6774
6775
6776
6777
6778
6779
6780
6781
6782
6783
6784
6785
6786
6787
6788
6789
6790
6791
6792
6793
6794
6795
6796
6797
6798
6799
6800
6801
6802
6803
6804
6805
6806
6807
6808
6809
6810
6811
6812
6813
6814
6815
6816
6817
6818
6819
6820
6821
6822
6823
6824
6825
6826
6827
6828
6829
6830
6831
6832
6833
6834
6835
6836
6837
6838
6839
6840
6841
6842
6843
6844
6845
6846
6847
6848
6849
6850
6851
6852
6853
6854
6855
6856
6857
6858
6859
6860
6861
6862
6863
6864
6865
6866
6867
6868
6869
6870
6871
6872
6873
6874
6875
6876
6877
6878
6879
6880
6881
6882
6883
6884
6885
6886
6887
6888
6889
6890
6891
6892
6893
6894
6895
6896
6897
6898
6899
6900
6901
6902
6903
6904
6905
6906
6907
6908
6909
6910
6911
6912
6913
6914
6915
6916
6917
6918
6919
6920
6921
6922
6923
6924
6925
6926
6927
6928
6929
6930
6931
6932
6933
6934
6935
6936
6937
6938
6939
6940
6941
6942
6943
6944
6945
6946
6947
6948
6949
6950
6951
6952
6953
6954
6955
6956
6957
6958
6959
6960
6961
6962
6963
6964
6965
6966
6967
6968
6969
6970
6971
6972
6973
6974
6975
6976
6977
6978
6979
6980
6981
6982
6983
6984
6985
6986
6987
6988
6989
6990
6991
6992
6993
6994
6995
6996
6997
6998
6999
7000
7001
7002
7003
7004
7005
7006
7007
7008
7009
7010
7011
7012
7013
7014
7015
7016
7017
7018
7019
7020
7021
7022
7023
7024
7025
7026
7027
7028
7029
7030
7031
7032
7033
7034
7035
7036
7037
7038
7039
7040
7041
7042
7043
7044
7045
7046
7047
7048
7049
7050
7051
7052
7053
7054
7055
7056
7057
7058
7059
7060
7061
7062
7063
7064
7065
7066
7067
7068
7069
7070
7071
7072
7073
7074
7075
7076
7077
7078
7079
7080
7081
7082
7083
7084
7085
7086
7087
7088
7089
7090
7091
7092
7093
7094
7095
7096
7097
7098
7099
7100
7101
7102
7103
7104
7105
7106
7107
7108
7109
7110
7111
7112
7113
7114
7115
7116
7117
7118
7119
7120
7121
7122
7123
7124
7125
7126
7127
7128
7129
7130
7131
7132
7133
7134
7135
7136
7137
7138
7139
7140
7141
7142
7143
7144
7145
7146
7147
7148
7149
7150
7151
7152
7153
7154
7155
7156
7157
7158
7159
7160
7161
7162
7163
7164
7165
7166
7167
7168
7169
7170
7171
7172
7173
7174
7175
7176
7177
7178
7179
7180
7181
7182
7183
7184
7185
7186
7187
7188
7189
7190
7191
7192
7193
7194
7195
7196
7197
7198
7199
7200
7201
7202
7203
7204
7205
7206
7207
7208
7209
7210
7211
7212
7213
7214
7215
7216
7217
7218
7219
7220
7221
7222
7223
7224
7225
7226
7227
7228
7229
7230
7231
7232
7233
7234
7235
7236
7237
7238
7239
7240
7241
7242
7243
7244
7245
7246
7247
7248
7249
7250
7251
7252
7253
7254
7255
7256
7257
7258
7259
7260
7261
7262
7263
7264
7265
7266
7267
7268
7269
7270
7271
7272
7273
7274
7275
7276
7277
7278
7279
7280
7281
7282
7283
7284
7285
7286
7287
7288
7289
7290
7291
7292
7293
7294
7295
7296
7297
7298
7299
7300
7301
7302
7303
7304
7305
7306
7307
7308
7309
7310
7311
7312
7313
7314
7315
7316
7317
7318
7319
7320
7321
7322
7323
7324
7325
7326
7327
7328
7329
7330
7331
7332
7333
7334
7335
7336
7337
7338
7339
7340
7341
7342
7343
7344
7345
7346
7347
7348
7349
7350
7351
7352
7353
7354
7355
7356
7357
7358
7359
7360
7361
7362
7363
7364
7365
7366
7367
7368
7369
7370
7371
7372
7373
7374
7375
7376
7377
7378
7379
7380
7381
7382
7383
7384
7385
7386
7387
7388
7389
7390
7391
7392
7393
7394
7395
7396
7397
7398
7399
7400
7401
7402
7403
7404
7405
7406
7407
7408
7409
7410
7411
7412
7413
7414
7415
7416
7417
7418
7419
7420
7421
7422
7423
7424
7425
7426
7427
7428
7429
7430
7431
7432
7433
7434
7435
7436
7437
7438
7439
7440
7441
7442
7443
7444
7445
7446
7447
7448
7449
7450
7451
7452
7453
7454
7455
7456
7457
7458
7459
7460
7461
7462
7463
7464
7465
7466
7467
7468
7469
7470
7471
7472
7473
7474
7475
7476
7477
7478
7479
7480
7481
7482
7483
7484
7485
7486
7487
7488
7489
7490
7491
7492
7493
7494
7495
7496
7497
7498
7499
7500
7501
7502
7503
7504
7505
7506
7507
7508
7509
7510
7511
7512
7513
7514
7515
7516
7517
7518
7519
7520
7521
7522
7523
7524
7525
7526
7527
7528
7529
7530
7531
7532
7533
7534
7535
7536
7537
7538
7539
7540
7541
7542
7543
7544
7545
7546
7547
7548
7549
7550
7551
7552
7553
7554
7555
7556
7557
7558
7559
7560
7561
7562
7563
7564
7565
7566
7567
7568
7569
7570
7571
7572
7573
7574
7575
7576
7577
7578
7579
7580
7581
7582
7583
7584
7585
7586
7587
7588
7589
7590
7591
7592
7593
7594
7595
7596
7597
7598
7599
7600
7601
7602
7603
7604
7605
7606
7607
7608
7609
7610
7611
7612
7613
7614
7615
7616
7617
7618
7619
7620
7621
7622
7623
7624
7625
7626
7627
7628
7629
7630
7631
7632
7633
7634
7635
7636
7637
7638
7639
7640
7641
7642
7643
7644
7645
7646
7647
7648
7649
7650
7651
7652
7653
7654
7655
7656
7657
7658
7659
7660
7661
7662
7663
7664
7665
7666
7667
7668
7669
7670
7671
7672
7673
7674
7675
7676
7677
7678
7679
7680
7681
7682
7683
7684
7685
7686
7687
7688
7689
7690
7691
7692
7693
7694
7695
7696
7697
7698
7699
7700
7701
7702
7703
7704
7705
7706
7707
7708
7709
7710
7711
7712
7713
7714
7715
7716
7717
7718
7719
7720
7721
7722
7723
7724
7725
7726
7727
7728
7729
7730
7731
7732
7733
7734
7735
7736
7737
7738
7739
7740
7741
7742
7743
7744
7745
7746
7747
7748
7749
7750
7751
7752
7753
7754
7755
7756
7757
7758
7759
7760
7761
7762
7763
7764
7765
7766
7767
7768
7769
7770
7771
7772
7773
7774
7775
7776
7777
7778
7779
7780
7781
7782
7783
7784
7785
7786
7787
7788
7789
7790
7791
7792
7793
7794
7795
7796
7797
7798
7799
7800
7801
7802
7803
7804
7805
7806
7807
7808
7809
7810
7811
7812
7813
7814
7815
7816
7817
7818
7819
7820
7821
7822
7823
7824
7825
7826
7827
7828
7829
7830
7831
7832
7833
7834
7835
7836
7837
7838
7839
7840
7841
7842
7843
7844
7845
7846
7847
7848
7849
7850
7851
7852
7853
7854
7855
7856
7857
7858
7859
7860
7861
7862
7863
7864
7865
7866
7867
7868
7869
7870
7871
7872
7873
7874
7875
7876
7877
7878
7879
7880
7881
7882
7883
7884
7885
7886
7887
7888
7889
7890
7891
7892
7893
7894
7895
7896
7897
7898
7899
7900
7901
7902
7903
7904
7905
7906
7907
7908
7909
7910
7911
7912
7913
7914
7915
7916
7917
7918
7919
7920
7921
7922
7923
7924
7925
7926
7927
7928
7929
7930
7931
7932
7933
7934
7935
7936
7937
7938
7939
7940
7941
7942
7943
7944
7945
7946
7947
7948
7949
7950
7951
7952
7953
7954
7955
7956
7957
7958
7959
7960
7961
7962
7963
7964
7965
7966
7967
7968
7969
7970
7971
7972
7973
7974
7975
7976
7977
7978
7979
7980
7981
7982
7983
7984
7985
7986
7987
7988
7989
7990
7991
7992
7993
7994
7995
7996
7997
7998
7999
8000
8001
8002
8003
8004
8005
8006
8007
8008
8009
8010
8011
8012
8013
8014
8015
8016
8017
8018
8019
8020
8021
8022
8023
8024
8025
8026
8027
8028
8029
8030
8031
8032
8033
8034
8035
8036
8037
8038
8039
8040
8041
8042
8043
8044
8045
8046
8047
8048
8049
8050
8051
8052
8053
8054
8055
8056
8057
8058
8059
8060
8061
8062
8063
8064
8065
8066
8067
8068
8069
8070
8071
8072
8073
8074
8075
8076
8077
8078
8079
8080
8081
8082
8083
8084
8085
8086
8087
8088
8089
8090
8091
8092
8093
8094
8095
8096
8097
8098
8099
8100
8101
8102
8103
8104
8105
8106
8107
8108
8109
8110
8111
8112
8113
8114
8115
8116
8117
8118
8119
8120
8121
8122
8123
8124
8125
8126
8127
8128
8129
8130
8131
8132
8133
8134
8135
8136
8137
8138
8139
8140
8141
8142
8143
8144
8145
8146
8147
8148
8149
8150
8151
8152
8153
8154
8155
8156
8157
8158
8159
8160
8161
8162
8163
8164
8165
8166
8167
8168
8169
8170
8171
8172
8173
8174
8175
8176
8177
8178
8179
8180
8181
8182
8183
8184
8185
8186
8187
8188
8189
8190
8191
8192
8193
8194
8195
8196
8197
8198
8199
8200
8201
8202
8203
8204
8205
8206
8207
8208
8209
8210
8211
8212
8213
8214
8215
8216
8217
8218
8219
8220
8221
8222
8223
8224
8225
8226
8227
8228
8229
8230
8231
8232
8233
8234
8235
8236
8237
8238
8239
8240
8241
8242
8243
8244
8245
8246
8247
8248
8249
8250
8251
8252
8253
8254
8255
8256
8257
8258
8259
8260
8261
8262
8263
8264
8265
8266
8267
8268
8269
8270
8271
8272
8273
8274
8275
8276
8277
8278
8279
8280
8281
8282
8283
8284
8285
8286
8287
8288
8289
8290
8291
8292
8293
8294
8295
8296
8297
8298
8299
8300
8301
8302
8303
8304
8305
8306
8307
8308
8309
8310
8311
8312
8313
8314
8315
8316
8317
8318
8319
8320
8321
8322
8323
8324
8325
8326
8327
8328
8329
8330
8331
8332
8333
8334
8335
8336
8337
8338
8339
8340
8341
8342
8343
8344
8345
8346
8347
8348
8349
8350
8351
8352
8353
8354
8355
8356
8357
8358
8359
8360
8361
8362
8363
8364
8365
8366
8367
8368
8369
8370
8371
8372
8373
8374
8375
8376
8377
8378
8379
8380
8381
8382
8383
8384
8385
8386
8387
8388
8389
8390
8391
8392
8393
8394
8395
8396
8397
8398
8399
8400
8401
8402
8403
8404
8405
8406
8407
8408
8409
8410
8411
8412
8413
8414
8415
8416
8417
8418
8419
8420
8421
8422
8423
8424
8425
8426
8427
8428
8429
8430
8431
8432
8433
8434
8435
8436
8437
8438
8439
8440
8441
8442
8443
8444
8445
8446
8447
8448
8449
8450
8451
8452
8453
8454
8455
8456
8457
8458
8459
8460
8461
8462
8463
8464
8465
8466
8467
8468
8469
8470
8471
8472
8473
8474
8475
8476
8477
8478
8479
8480
8481
8482
8483
8484
8485
8486
8487
8488
8489
8490
8491
8492
8493
8494
8495
8496
8497
8498
8499
8500
8501
8502
8503
8504
8505
8506
8507
8508
8509
8510
8511
8512
8513
8514
8515
8516
8517
8518
8519
8520
8521
8522
8523
8524
8525
8526
8527
8528
8529
8530
8531
8532
8533
8534
8535
8536
8537
8538
8539
8540
8541
8542
8543
8544
8545
8546
8547
8548
8549
8550
8551
8552
8553
8554
8555
8556
8557
8558
8559
8560
8561
8562
8563
8564
8565
8566
8567
8568
8569
8570
8571
8572
8573
8574
8575
8576
8577
8578
8579
8580
8581
8582
8583
8584
8585
8586
8587
8588
8589
8590
8591
8592
8593
8594
8595
8596
8597
8598
8599
8600
8601
8602
8603
8604
8605
8606
8607
8608
8609
8610
8611
8612
8613
8614
8615
8616
8617
8618
8619
8620
8621
8622
8623
8624
8625
8626
8627
8628
8629
8630
8631
8632
8633
8634
8635
8636
8637
8638
8639
8640
8641
8642
8643
8644
8645
8646
8647
8648
8649
8650
8651
8652
8653
8654
8655
8656
8657
8658
8659
8660
8661
8662
8663
8664
8665
8666
8667
8668
8669
8670
8671
8672
8673
8674
8675
8676
8677
8678
8679
8680
8681
8682
8683
8684
8685
8686
8687
8688
8689
8690
8691
8692
8693
8694
8695
8696
8697
8698
8699
8700
8701
8702
8703
8704
8705
8706
8707
8708
8709
8710
8711
8712
8713
8714
8715
8716
8717
8718
8719
8720
8721
8722
8723
8724
8725
8726
8727
8728
8729
8730
8731
8732
8733
8734
8735
8736
8737
8738
8739
8740
8741
8742
8743
8744
8745
8746
8747
8748
8749
8750
8751
8752
8753
8754
8755
8756
8757
8758
8759
8760
8761
8762
8763
8764
8765
8766
8767
8768
8769
8770
8771
8772
8773
8774
8775
8776
8777
8778
8779
8780
8781
8782
8783
8784
8785
8786
8787
8788
8789
8790
8791
8792
8793
8794
8795
8796
8797
8798
8799
8800
8801
8802
8803
8804
8805
8806
8807
8808
8809
8810
8811
8812
8813
8814
8815
8816
8817
8818
8819
8820
8821
8822
8823
8824
8825
8826
8827
8828
8829
8830
8831
8832
8833
8834
8835
8836
8837
8838
8839
8840
8841
8842
8843
8844
8845
8846
8847
8848
8849
8850
8851
8852
8853
8854
8855
8856
8857
8858
8859
8860
8861
8862
8863
8864
8865
8866
8867
8868
8869
8870
8871
8872
8873
8874
8875
8876
8877
8878
8879
8880
8881
8882
8883
8884
8885
8886
8887
8888
8889
8890
8891
8892
8893
8894
8895
8896
8897
8898
8899
8900
8901
8902
8903
8904
8905
8906
8907
8908
8909
8910
8911
8912
8913
8914
8915
8916
8917
8918
8919
8920
8921
8922
8923
8924
8925
8926
8927
8928
8929
8930
8931
8932
8933
8934
8935
8936
8937
8938
8939
8940
8941
8942
8943
8944
8945
8946
8947
8948
8949
8950
8951
8952
8953
8954
8955
8956
8957
8958
8959
8960
8961
8962
8963
8964
8965
8966
8967
8968
8969
8970
8971
8972
8973
8974
8975
8976
8977
8978
8979
8980
8981
8982
8983
8984
8985
8986
8987
8988
8989
8990
8991
8992
8993
8994
8995
8996
8997
8998
8999
9000
9001
9002
9003
9004
9005
9006
9007
9008
9009
9010
9011
9012
9013
9014
9015
9016
9017
9018
9019
9020
9021
9022
9023
9024
9025
9026
9027
9028
9029
9030
9031
9032
9033
9034
9035
9036
9037
9038
9039
9040
9041
9042
9043
9044
9045
9046
9047
9048
9049
9050
9051
9052
9053
9054
9055
9056
9057
9058
9059
9060
9061
9062
9063
9064
9065
9066
9067
9068
9069
9070
9071
9072
9073
9074
9075
9076
9077
9078
9079
9080
9081
9082
9083
9084
9085
9086
9087
9088
9089
9090
9091
9092
9093
9094
9095
9096
9097
9098
9099
9100
9101
9102
9103
9104
9105
9106
9107
9108
9109
9110
9111
9112
9113
9114
9115
9116
9117
9118
9119
9120
9121
9122
9123
9124
9125
9126
9127
9128
9129
9130
9131
9132
9133
9134
9135
9136
9137
9138
9139
9140
9141
9142
9143
9144
9145
9146
9147
9148
9149
9150
9151
9152
9153
9154
9155
9156
9157
9158
9159
9160
9161
9162
9163
9164
9165
9166
9167
9168
9169
9170
9171
9172
9173
9174
9175
9176
9177
9178
9179
9180
9181
9182
9183
9184
9185
9186
9187
9188
9189
9190
9191
9192
9193
9194
9195
9196
9197
9198
9199
9200
9201
9202
9203
9204
9205
9206
9207
9208
9209
9210
9211
9212
9213
9214
9215
9216
9217
9218
9219
9220
9221
9222
9223
9224
9225
9226
9227
9228
9229
9230
9231
9232
9233
9234
9235
9236
9237
9238
9239
9240
9241
9242
9243
9244
9245
9246
9247
9248
9249
9250
9251
9252
9253
9254
9255
9256
9257
9258
9259
9260
9261
9262
9263
9264
9265
9266
9267
9268
9269
9270
9271
9272
9273
9274
9275
9276
9277
9278
9279
9280
9281
9282
9283
9284
9285
9286
9287
9288
9289
9290
9291
9292
9293
9294
9295
9296
9297
9298
9299
9300
9301
9302
9303
9304
9305
9306
9307
9308
9309
9310
9311
9312
9313
9314
9315
9316
9317
9318
9319
9320
9321
9322
9323
9324
9325
9326
9327
9328
9329
9330
9331
9332
9333
9334
9335
9336
9337
9338
9339
9340
9341
9342
9343
9344
9345
9346
9347
9348
9349
9350
9351
9352
9353
9354
9355
9356
9357
9358
9359
9360
9361
9362
9363
9364
9365
9366
9367
9368
9369
9370
9371
9372
9373
9374
9375
9376
9377
9378
9379
9380
9381
9382
9383
9384
9385
9386
9387
9388
9389
9390
9391
9392
9393
9394
9395
9396
9397
9398
9399
9400
9401
9402
9403
9404
9405
9406
9407
9408
9409
9410
9411
9412
9413
9414
9415
9416
9417
9418
9419
9420
9421
9422
9423
9424
9425
9426
9427
9428
9429
9430
9431
9432
9433
9434
9435
9436
9437
9438
9439
9440
9441
9442
9443
9444
9445
9446
9447
9448
9449
9450
9451
9452
9453
9454
9455
9456
9457
9458
9459
9460
9461
9462
9463
9464
9465
9466
9467
9468
9469
9470
9471
9472
9473
9474
9475
9476
9477
9478
9479
9480
9481
9482
9483
9484
9485
9486
9487
9488
9489
9490
9491
9492
9493
9494
9495
9496
9497
9498
9499
9500
9501
9502
9503
9504
9505
9506
9507
9508
9509
9510
9511
9512
9513
9514
9515
9516
9517
9518
9519
9520
9521
9522
9523
9524
9525
9526
9527
9528
9529
9530
9531
9532
9533
9534
9535
9536
9537
9538
9539
9540
9541
9542
9543
9544
9545
9546
9547
9548
9549
9550
9551
9552
9553
9554
9555
9556
9557
9558
9559
9560
9561
9562
9563
9564
9565
9566
9567
9568
9569
9570
9571
9572
9573
9574
9575
9576
9577
9578
9579
9580
9581
9582
9583
9584
9585
9586
9587
9588
9589
9590
9591
9592
9593
9594
9595
9596
9597
9598
9599
9600
9601
9602
9603
9604
9605
9606
9607
9608
9609
9610
9611
9612
9613
9614
9615
9616
9617
9618
9619
9620
9621
9622
9623
9624
9625
9626
9627
9628
9629
9630
9631
9632
9633
9634
9635
9636
9637
9638
9639
9640
9641
9642
9643
9644
9645
9646
9647
9648
9649
9650
9651
9652
9653
9654
9655
9656
9657
9658
9659
9660
9661
9662
9663
9664
9665
9666
9667
9668
9669
9670
9671
9672
9673
9674
9675
9676
9677
9678
9679
9680
9681
9682
9683
9684
9685
9686
9687
9688
9689
9690
9691
9692
9693
9694
9695
9696
9697
9698
9699
9700
9701
9702
9703
9704
9705
9706
9707
9708
9709
9710
9711
9712
9713
9714
9715
9716
9717
9718
9719
9720
9721
9722
9723
9724
9725
9726
9727
9728
9729
9730
9731
9732
9733
9734
9735
9736
9737
9738
9739
9740
9741
9742
9743
9744
9745
9746
9747
9748
9749
9750
9751
9752
9753
9754
9755
9756
9757
9758
9759
9760
9761
9762
9763
9764
9765
9766
9767
9768
9769
9770
9771
9772
9773
9774
9775
9776
9777
9778
9779
9780
9781
9782
9783
9784
9785
9786
9787
9788
9789
9790
9791
9792
9793
9794
9795
9796
9797
9798
9799
9800
9801
9802
9803
9804
9805
9806
9807
9808
9809
9810
9811
9812
9813
9814
9815
9816
9817
9818
9819
9820
9821
9822
9823
9824
9825
9826
9827
9828
9829
9830
9831
9832
9833
9834
9835
9836
9837
9838
9839
9840
9841
9842
9843
9844
9845
9846
9847
9848
9849
9850
9851
9852
9853
9854
9855
9856
9857
9858
9859
9860
9861
9862
9863
9864
9865
9866
9867
9868
9869
9870
9871
9872
9873
9874
9875
9876
9877
9878
9879
9880
9881
9882
9883
9884
9885
9886
9887
9888
9889
9890
9891
9892
9893
9894
9895
9896
9897
9898
9899
9900
9901
9902
9903
9904
9905
9906
9907
9908
9909
9910
9911
9912
9913
9914
9915
9916
9917
9918
9919
9920
9921
9922
9923
9924
9925
9926
9927
9928
9929
9930
9931
9932
9933
9934
9935
9936
9937
9938
9939
9940
9941
9942
9943
9944
9945
9946
9947
9948
9949
9950
9951
9952
9953
9954
9955
9956
9957
9958
9959
9960
9961
9962
9963
9964
9965
9966
9967
9968
9969
9970
9971
9972
9973
9974
9975
9976
9977
9978
9979
9980
9981
9982
9983
9984
9985
9986
9987
9988
9989
9990
9991
9992
9993
9994
9995
9996
9997
9998
9999
10000
10001
10002
10003
10004
10005
10006
10007
10008
10009
10010
10011
10012
10013
10014
10015
10016
10017
10018
10019
10020
10021
10022
10023
10024
10025
10026
10027
10028
10029
10030
10031
10032
10033
10034
10035
10036
10037
10038
10039
10040
10041
10042
10043
10044
10045
10046
10047
10048
10049
10050
10051
10052
10053
10054
10055
10056
10057
10058
10059
10060
10061
10062
10063
10064
10065
10066
10067
10068
10069
10070
10071
10072
10073
10074
10075
10076
10077
10078
10079
10080
10081
10082
10083
10084
10085
10086
10087
10088
10089
10090
10091
10092
10093
10094
10095
10096
10097
10098
10099
10100
10101
10102
10103
10104
10105
10106
10107
10108
10109
10110
10111
10112
10113
10114
10115
10116
10117
10118
10119
10120
10121
10122
10123
10124
10125
10126
10127
10128
10129
10130
10131
10132
10133
10134
10135
10136
10137
10138
10139
10140
10141
10142
10143
10144
10145
10146
10147
10148
10149
10150
10151
10152
10153
10154
10155
10156
10157
10158
10159
10160
10161
10162
10163
10164
10165
10166
10167
10168
10169
10170
10171
10172
10173
10174
10175
10176
10177
10178
10179
10180
10181
10182
10183
10184
10185
10186
10187
10188
10189
10190
10191
10192
10193
10194
10195
10196
10197
10198
10199
10200
10201
10202
10203
10204
10205
10206
10207
10208
10209
10210
10211
10212
10213
10214
10215
10216
10217
10218
10219
10220
10221
10222
10223
10224
10225
10226
10227
10228
10229
10230
10231
10232
10233
10234
10235
10236
10237
10238
10239
10240
10241
10242
10243
10244
10245
10246
10247
10248
10249
10250
10251
10252
10253
10254
10255
10256
10257
10258
10259
10260
10261
10262
10263
10264
10265
10266
10267
10268
10269
10270
10271
10272
10273
10274
10275
10276
10277
10278
10279
10280
10281
10282
10283
10284
10285
10286
10287
10288
10289
10290
10291
10292
10293
10294
10295
10296
10297
10298
10299
10300
10301
10302
10303
10304
10305
10306
10307
10308
10309
10310
10311
10312
10313
10314
10315
10316
10317
10318
10319
10320
10321
10322
10323
10324
10325
10326
10327
10328
10329
10330
10331
10332
10333
10334
10335
10336
10337
10338
10339
10340
10341
10342
10343
10344
10345
10346
10347
10348
10349
10350
10351
10352
10353
10354
10355
10356
10357
10358
10359
10360
10361
10362
10363
10364
10365
10366
10367
10368
10369
10370
10371
10372
10373
10374
10375
10376
10377
10378
10379
10380
10381
10382
10383
10384
10385
10386
10387
10388
10389
10390
10391
10392
10393
10394
10395
10396
10397
10398
10399
10400
10401
10402
10403
10404
10405
10406
10407
10408
10409
10410
10411
10412
10413
10414
10415
10416
10417
10418
10419
10420
10421
10422
10423
10424
10425
10426
10427
10428
10429
10430
10431
10432
10433
10434
10435
10436
10437
10438
10439
10440
10441
10442
10443
10444
10445
10446
10447
10448
10449
10450
10451
10452
10453
10454
10455
10456
10457
10458
10459
10460
10461
10462
10463
10464
10465
10466
10467
10468
10469
10470
10471
10472
10473
10474
10475
10476
10477
10478
10479
10480
10481
10482
10483
10484
10485
10486
10487
10488
10489
10490
10491
10492
10493
10494
10495
10496
10497
10498
10499
10500
10501
10502
10503
10504
10505
10506
10507
10508
10509
10510
10511
10512
10513
10514
10515
10516
10517
10518
10519
10520
10521
10522
10523
10524
10525
10526
10527
10528
10529
10530
10531
10532
10533
10534
10535
10536
10537
10538
10539
10540
10541
10542
10543
10544
10545
10546
10547
10548
10549
10550
10551
10552
10553
10554
10555
10556
10557
10558
10559
10560
10561
10562
10563
10564
10565
10566
10567
10568
10569
10570
10571
10572
10573
10574
10575
10576
10577
10578
10579
10580
10581
10582
10583
10584
10585
10586
10587
10588
10589
10590
10591
10592
10593
10594
10595
10596
10597
10598
10599
10600
10601
10602
10603
10604
10605
10606
10607
10608
10609
10610
10611
10612
10613
10614
10615
10616
10617
10618
10619
10620
10621
10622
10623
10624
10625
10626
10627
10628
10629
10630
10631
10632
10633
10634
10635
10636
10637
10638
10639
10640
10641
10642
10643
10644
10645
10646
10647
10648
10649
10650
10651
10652
10653
10654
10655
10656
10657
10658
10659
10660
10661
10662
10663
10664
10665
10666
10667
10668
10669
10670
10671
10672
10673
10674
10675
10676
10677
10678
10679
10680
10681
10682
10683
10684
10685
10686
10687
10688
10689
10690
10691
10692
10693
10694
10695
10696
10697
10698
10699
10700
10701
10702
10703
10704
10705
10706
10707
10708
10709
10710
10711
10712
10713
10714
10715
10716
10717
10718
10719
10720
10721
10722
10723
10724
10725
10726
10727
10728
10729
10730
10731
10732
10733
10734
10735
10736
10737
10738
10739
10740
10741
10742
10743
10744
10745
10746
10747
10748
10749
10750
10751
10752
10753
10754
10755
10756
10757
10758
10759
10760
10761
10762
10763
10764
10765
10766
10767
10768
10769
10770
10771
10772
10773
10774
10775
10776
10777
10778
10779
10780
10781
10782
10783
10784
10785
10786
10787
10788
10789
10790
10791
10792
10793
10794
10795
10796
10797
10798
10799
10800
10801
10802
10803
10804
10805
10806
10807
10808
10809
10810
10811
10812
10813
10814
10815
10816
10817
10818
10819
10820
10821
10822
10823
10824
10825
10826
10827
10828
10829
10830
10831
10832
10833
10834
10835
10836
10837
10838
10839
10840
10841
10842
10843
10844
10845
10846
10847
10848
10849
10850
10851
10852
10853
10854
10855
10856
10857
10858
10859
10860
10861
10862
10863
10864
10865
10866
10867
10868
10869
10870
10871
10872
10873
10874
10875
10876
10877
10878
10879
10880
10881
10882
10883
10884
10885
10886
10887
10888
10889
10890
10891
10892
10893
10894
10895
10896
10897
10898
10899
10900
10901
10902
10903
10904
10905
10906
10907
10908
10909
10910
10911
10912
10913
10914
10915
10916
10917
10918
10919
10920
10921
10922
10923
10924
10925
10926
10927
10928
10929
10930
10931
10932
10933
10934
10935
10936
10937
10938
10939
10940
10941
10942
10943
10944
10945
10946
10947
10948
10949
10950
10951
10952
10953
10954
10955
10956
10957
10958
10959
10960
10961
10962
10963
10964
10965
10966
10967
10968
10969
10970
10971
10972
10973
10974
10975
10976
10977
10978
10979
10980
10981
10982
10983
10984
10985
10986
10987
10988
10989
10990
10991
10992
10993
10994
10995
10996
10997
10998
10999
11000
11001
11002
11003
11004
11005
11006
11007
11008
11009
11010
11011
11012
11013
11014
11015
11016
11017
11018
11019
11020
11021
11022
11023
11024
11025
11026
11027
11028
11029
11030
11031
11032
11033
11034
11035
11036
11037
11038
11039
11040
11041
11042
11043
11044
11045
11046
11047
11048
11049
11050
11051
11052
11053
11054
11055
11056
11057
11058
11059
11060
11061
11062
11063
11064
11065
11066
11067
11068
11069
11070
11071
11072
11073
11074
11075
11076
11077
11078
11079
11080
11081
11082
11083
11084
11085
11086
11087
11088
11089
11090
11091
11092
11093
11094
11095
11096
11097
11098
11099
11100
11101
11102
11103
11104
11105
11106
11107
11108
11109
11110
11111
11112
11113
11114
11115
11116
11117
11118
11119
11120
11121
11122
11123
11124
11125
11126
11127
11128
11129
11130
11131
11132
11133
11134
11135
11136
11137
11138
11139
11140
11141
11142
11143
11144
11145
11146
11147
11148
11149
11150
11151
11152
11153
11154
11155
11156
11157
11158
11159
11160
11161
11162
11163
11164
11165
11166
11167
11168
11169
11170
11171
11172
11173
11174
11175
11176
11177
11178
11179
11180
11181
11182
11183
11184
11185
11186
11187
11188
11189
11190
11191
11192
11193
11194
11195
11196
11197
11198
11199
11200
11201
11202
11203
11204
11205
11206
11207
11208
11209
11210
11211
11212
11213
11214
11215
11216
11217
11218
11219
11220
11221
11222
11223
11224
11225
11226
11227
11228
11229
11230
11231
11232
11233
11234
11235
11236
11237
11238
11239
11240
11241
11242
11243
11244
11245
11246
11247
11248
11249
11250
11251
11252
11253
11254
11255
11256
11257
11258
11259
11260
11261
11262
11263
11264
11265
11266
11267
11268
11269
11270
11271
11272
11273
11274
11275
11276
11277
11278
11279
11280
11281
11282
11283
11284
11285
11286
11287
11288
11289
11290
11291
11292
11293
11294
11295
11296
11297
11298
11299
11300
11301
11302
11303
11304
11305
11306
11307
11308
11309
11310
11311
11312
11313
11314
11315
11316
11317
11318
11319
11320
11321
11322
11323
11324
11325
11326
11327
11328
11329
11330
11331
11332
11333
11334
11335
11336
11337
11338
11339
11340
11341
11342
11343
11344
11345
11346
11347
11348
11349
11350
11351
11352
11353
11354
11355
11356
11357
11358
11359
11360
11361
11362
11363
11364
11365
11366
11367
11368
11369
11370
11371
11372
11373
11374
11375
11376
11377
11378
11379
11380
11381
11382
11383
11384
11385
11386
11387
11388
11389
11390
11391
11392
11393
11394
11395
11396
11397
11398
11399
11400
11401
11402
11403
11404
11405
11406
11407
11408
11409
11410
11411
11412
11413
11414
11415
11416
11417
11418
11419
11420
11421
11422
11423
11424
11425
11426
11427
11428
11429
11430
11431
11432
11433
11434
11435
11436
11437
11438
11439
11440
11441
11442
11443
11444
11445
11446
11447
11448
11449
11450
11451
11452
11453
11454
11455
11456
11457
11458
11459
11460
11461
11462
11463
11464
11465
11466
11467
11468
11469
11470
11471
11472
11473
11474
11475
11476
11477
11478
11479
11480
11481
11482
11483
11484
11485
11486
11487
11488
11489
11490
11491
11492
11493
11494
11495
11496
11497
11498
11499
11500
11501
11502
11503
11504
11505
11506
11507
11508
11509
11510
11511
11512
11513
11514
11515
11516
11517
11518
11519
11520
11521
11522
11523
11524
11525
11526
11527
11528
11529
11530
11531
11532
11533
11534
11535
11536
11537
11538
11539
11540
11541
11542
11543
11544
11545
11546
11547
11548
11549
11550
11551
11552
11553
11554
11555
11556
11557
11558
11559
11560
11561
11562
11563
11564
11565
11566
11567
11568
11569
11570
11571
11572
11573
11574
11575
11576
11577
11578
11579
11580
11581
11582
11583
11584
11585
11586
11587
11588
11589
11590
11591
11592
11593
11594
11595
11596
11597
11598
11599
11600
11601
11602
11603
11604
11605
11606
11607
11608
11609
11610
11611
11612
11613
11614
11615
11616
11617
11618
11619
11620
11621
11622
11623
11624
11625
11626
11627
11628
11629
11630
11631
11632
11633
11634
11635
11636
11637
11638
11639
11640
11641
11642
11643
11644
11645
11646
11647
11648
11649
11650
11651
11652
11653
11654
11655
11656
11657
11658
11659
11660
11661
11662
11663
11664
11665
11666
11667
11668
11669
11670
11671
11672
11673
11674
11675
11676
11677
11678
11679
11680
11681
11682
11683
11684
11685
11686
11687
11688
11689
11690
11691
11692
11693
11694
11695
11696
11697
11698
11699
11700
11701
11702
11703
11704
11705
11706
11707
11708
11709
11710
11711
11712
11713
11714
11715
11716
11717
11718
11719
11720
11721
11722
11723
11724
11725
11726
11727
11728
11729
11730
11731
11732
11733
11734
11735
11736
11737
11738
11739
11740
11741
11742
11743
11744
11745
11746
11747
11748
11749
11750
11751
11752
11753
11754
11755
11756
11757
11758
11759
11760
11761
11762
11763
11764
11765
11766
11767
11768
11769
11770
11771
11772
11773
11774
11775
11776
11777
11778
11779
11780
11781
11782
11783
11784
11785
11786
11787
11788
11789
11790
11791
11792
11793
11794
11795
11796
11797
11798
11799
11800
11801
11802
11803
11804
11805
11806
11807
11808
11809
11810
11811
11812
11813
11814
11815
11816
11817
11818
11819
11820
11821
11822
11823
11824
11825
11826
11827
11828
11829
11830
11831
11832
11833
11834
11835
11836
11837
11838
11839
11840
11841
11842
11843
11844
11845
11846
11847
11848
11849
11850
11851
11852
11853
11854
11855
11856
11857
11858
11859
11860
11861
11862
11863
11864
11865
11866
11867
11868
11869
11870
11871
11872
11873
11874
11875
11876
11877
11878
11879
11880
11881
11882
11883
11884
11885
11886
11887
11888
11889
11890
11891
11892
11893
11894
11895
11896
11897
11898
11899
11900
11901
11902
11903
11904
11905
11906
11907
11908
11909
11910
11911
11912
11913
11914
11915
11916
11917
11918
11919
11920
11921
11922
11923
11924
11925
11926
11927
11928
11929
11930
11931
11932
11933
11934
11935
11936
11937
11938
11939
11940
11941
11942
11943
11944
11945
11946
11947
11948
11949
11950
11951
11952
11953
11954
11955
11956
11957
11958
11959
11960
11961
11962
11963
11964
11965
11966
11967
11968
11969
11970
11971
11972
11973
11974
11975
11976
11977
11978
11979
11980
11981
11982
11983
11984
11985
11986
11987
11988
11989
11990
11991
11992
11993
11994
11995
11996
11997
11998
11999
12000
12001
12002
12003
12004
12005
12006
12007
12008
12009
12010
12011
12012
12013
12014
12015
12016
12017
12018
12019
12020
12021
12022
12023
12024
12025
12026
12027
12028
12029
12030
12031
12032
12033
12034
12035
12036
12037
12038
12039
12040
12041
12042
12043
12044
12045
12046
12047
12048
12049
12050
12051
12052
12053
12054
12055
12056
12057
12058
12059
12060
12061
12062
12063
12064
12065
12066
12067
12068
12069
12070
12071
12072
12073
12074
12075
12076
12077
12078
12079
12080
12081
12082
12083
12084
12085
12086
12087
12088
12089
12090
12091
12092
12093
12094
12095
12096
12097
12098
12099
12100
12101
12102
12103
12104
12105
12106
12107
12108
12109
12110
12111
12112
12113
12114
12115
12116
12117
12118
12119
12120
12121
12122
12123
12124
12125
12126
12127
12128
12129
12130
12131
12132
12133
12134
12135
12136
12137
12138
12139
12140
12141
12142
12143
12144
12145
12146
12147
12148
12149
12150
12151
12152
12153
12154
12155
12156
12157
12158
12159
12160
12161
12162
12163
12164
12165
12166
12167
12168
12169
12170
12171
12172
12173
12174
12175
12176
12177
12178
12179
12180
12181
12182
12183
12184
12185
12186
12187
12188
12189
12190
12191
12192
12193
12194
12195
12196
12197
12198
12199
12200
12201
12202
12203
12204
12205
12206
12207
12208
12209
12210
12211
12212
12213
12214
12215
12216
12217
12218
12219
12220
12221
12222
12223
12224
12225
12226
12227
12228
12229
12230
12231
12232
12233
12234
12235
12236
12237
12238
12239
12240
12241
12242
12243
12244
12245
12246
12247
12248
12249
12250
12251
12252
12253
12254
12255
12256
12257
12258
12259
12260
12261
12262
12263
12264
12265
12266
12267
12268
12269
12270
12271
12272
12273
12274
12275
12276
12277
12278
12279
12280
12281
12282
12283
12284
12285
12286
12287
12288
12289
12290
12291
12292
12293
12294
12295
12296
12297
12298
12299
12300
12301
12302
12303
12304
12305
12306
12307
12308
12309
12310
12311
12312
12313
12314
12315
12316
12317
12318
12319
12320
12321
12322
12323
12324
12325
12326
12327
12328
12329
12330
12331
12332
12333
12334
12335
12336
12337
12338
12339
12340
12341
12342
12343
12344
12345
12346
12347
12348
12349
12350
12351
12352
12353
12354
12355
12356
12357
12358
12359
12360
12361
12362
12363
12364
12365
12366
12367
12368
12369
12370
12371
12372
12373
12374
12375
12376
12377
12378
12379
12380
12381
12382
12383
12384
12385
12386
12387
12388
12389
12390
12391
12392
12393
12394
12395
12396
12397
12398
12399
12400
12401
12402
12403
12404
12405
12406
12407
12408
12409
12410
12411
12412
12413
12414
12415
12416
12417
12418
12419
12420
12421
12422
12423
12424
12425
12426
12427
12428
12429
12430
12431
12432
12433
12434
12435
12436
12437
12438
12439
12440
12441
12442
12443
12444
12445
12446
12447
12448
12449
12450
12451
12452
12453
12454
12455
12456
12457
12458
12459
12460
12461
12462
12463
12464
12465
12466
12467
12468
12469
12470
12471
12472
12473
12474
12475
12476
12477
12478
12479
12480
12481
12482
12483
12484
12485
12486
12487
12488
12489
12490
12491
12492
12493
12494
12495
12496
12497
12498
12499
12500
12501
12502
12503
12504
12505
12506
12507
12508
12509
12510
12511
12512
12513
12514
12515
12516
12517
12518
12519
12520
12521
12522
12523
12524
12525
12526
12527
12528
12529
12530
12531
12532
12533
12534
12535
12536
12537
12538
12539
12540
12541
12542
12543
12544
12545
12546
12547
12548
12549
12550
12551
12552
12553
12554
12555
12556
12557
12558
12559
12560
12561
12562
12563
12564
12565
12566
12567
12568
12569
12570
12571
12572
12573
12574
12575
12576
12577
12578
12579
12580
12581
12582
12583
12584
12585
12586
12587
12588
12589
12590
12591
12592
12593
12594
12595
12596
12597
12598
12599
12600
12601
12602
12603
12604
12605
12606
12607
12608
12609
12610
12611
12612
12613
12614
12615
12616
12617
12618
12619
12620
12621
12622
12623
12624
12625
12626
12627
12628
12629
12630
12631
12632
12633
12634
12635
12636
12637
12638
12639
12640
12641
12642
12643
12644
12645
12646
12647
12648
12649
12650
12651
12652
12653
12654
12655
12656
12657
12658
12659
12660
12661
12662
12663
12664
12665
12666
12667
12668
12669
12670
12671
12672
12673
12674
12675
12676
12677
12678
12679
12680
12681
12682
12683
12684
12685
12686
12687
12688
12689
12690
12691
12692
12693
12694
12695
12696
12697
12698
12699
12700
12701
12702
12703
12704
12705
12706
12707
12708
12709
12710
12711
12712
12713
12714
12715
12716
12717
12718
12719
12720
12721
12722
12723
12724
12725
12726
12727
12728
12729
12730
12731
12732
12733
12734
12735
12736
12737
12738
12739
12740
12741
12742
12743
12744
12745
12746
12747
12748
12749
12750
12751
12752
12753
12754
12755
12756
12757
12758
12759
12760
12761
12762
12763
12764
12765
12766
12767
12768
12769
12770
12771
12772
12773
12774
12775
12776
12777
12778
12779
12780
12781
12782
12783
12784
12785
12786
12787
12788
12789
12790
12791
12792
12793
12794
12795
12796
12797
12798
12799
12800
12801
12802
12803
12804
12805
12806
12807
12808
12809
12810
12811
12812
12813
12814
12815
12816
12817
12818
12819
12820
12821
12822
12823
12824
12825
12826
12827
12828
12829
12830
12831
12832
12833
12834
12835
12836
12837
12838
12839
12840
12841
12842
12843
12844
12845
12846
12847
12848
12849
12850
12851
12852
12853
12854
12855
12856
12857
12858
12859
12860
12861
12862
12863
12864
12865
12866
12867
12868
12869
12870
12871
12872
12873
12874
12875
12876
12877
12878
12879
12880
12881
12882
12883
12884
12885
12886
12887
12888
12889
12890
12891
12892
12893
12894
12895
12896
12897
12898
12899
12900
12901
12902
12903
12904
12905
12906
12907
12908
12909
12910
12911
12912
12913
12914
12915
12916
12917
12918
12919
12920
12921
12922
12923
12924
12925
12926
12927
12928
12929
12930
12931
12932
12933
12934
12935
12936
12937
12938
12939
12940
12941
12942
12943
12944
12945
12946
12947
12948
12949
12950
12951
12952
12953
12954
12955
12956
12957
12958
12959
12960
12961
12962
12963
12964
12965
12966
12967
12968
12969
12970
12971
12972
12973
12974
12975
12976
12977
12978
12979
12980
12981
12982
12983
12984
12985
12986
12987
12988
12989
12990
12991
12992
12993
12994
12995
12996
12997
12998
12999
13000
13001
13002
13003
13004
13005
13006
13007
13008
13009
13010
13011
13012
13013
13014
13015
13016
13017
13018
13019
13020
13021
13022
13023
13024
13025
13026
13027
13028
13029
13030
13031
13032
13033
13034
13035
13036
13037
13038
13039
13040
13041
13042
13043
13044
13045
13046
13047
13048
13049
13050
13051
13052
13053
13054
13055
13056
13057
13058
13059
13060
13061
13062
13063
13064
13065
13066
13067
13068
13069
13070
13071
13072
13073
13074
13075
13076
13077
13078
13079
13080
13081
13082
13083
13084
13085
13086
13087
13088
13089
13090
13091
13092
13093
13094
13095
13096
13097
13098
13099
13100
13101
13102
13103
13104
13105
13106
13107
13108
13109
13110
13111
13112
13113
13114
13115
13116
13117
13118
13119
13120
13121
13122
13123
13124
13125
13126
13127
13128
13129
13130
13131
13132
13133
13134
13135
13136
13137
13138
13139
13140
13141
13142
13143
13144
13145
13146
13147
13148
13149
13150
13151
13152
13153
13154
13155
13156
13157
13158
13159
13160
13161
13162
13163
13164
13165
13166
13167
13168
13169
13170
13171
13172
13173
13174
13175
13176
13177
13178
13179
13180
13181
13182
13183
13184
13185
13186
13187
13188
13189
13190
13191
13192
13193
13194
13195
13196
13197
13198
13199
13200
13201
13202
13203
13204
13205
13206
13207
13208
13209
13210
13211
13212
13213
13214
13215
13216
13217
13218
13219
13220
13221
13222
13223
13224
13225
13226
13227
13228
13229
13230
13231
13232
13233
13234
13235
13236
13237
13238
13239
13240
13241
13242
13243
13244
13245
13246
13247
13248
13249
13250
13251
13252
13253
13254
13255
13256
13257
13258
13259
13260
13261
13262
13263
13264
13265
13266
13267
13268
13269
13270
13271
13272
13273
13274
13275
13276
13277
13278
13279
13280
13281
13282
13283
13284
13285
13286
13287
13288
13289
13290
13291
13292
13293
13294
13295
13296
13297
13298
13299
13300
13301
13302
13303
13304
13305
13306
13307
13308
13309
13310
13311
13312
13313
13314
13315
13316
13317
13318
13319
13320
13321
13322
13323
13324
13325
13326
13327
13328
13329
13330
13331
13332
13333
13334
13335
13336
13337
13338
13339
13340
13341
13342
13343
13344
13345
13346
13347
13348
13349
13350
13351
13352
13353
13354
13355
13356
13357
13358
13359
13360
13361
13362
13363
13364
13365
13366
13367
13368
13369
13370
13371
13372
13373
13374
13375
13376
13377
13378
13379
13380
13381
13382
13383
13384
13385
13386
13387
13388
13389
13390
13391
13392
13393
13394
13395
13396
13397
13398
13399
13400
13401
13402
13403
13404
13405
13406
13407
13408
13409
13410
13411
13412
13413
13414
13415
13416
13417
13418
13419
13420
13421
13422
13423
13424
13425
13426
13427
13428
13429
13430
13431
13432
13433
13434
13435
13436
13437
13438
13439
13440
13441
13442
13443
13444
13445
13446
13447
13448
13449
13450
13451
13452
13453
13454
13455
13456
13457
13458
13459
13460
13461
13462
13463
13464
13465
13466
13467
13468
13469
13470
13471
13472
13473
13474
13475
13476
13477
13478
13479
13480
13481
13482
13483
13484
13485
13486
13487
13488
13489
13490
13491
13492
13493
13494
13495
13496
13497
13498
13499
13500
13501
13502
13503
13504
13505
13506
13507
13508
13509
13510
13511
13512
13513
13514
13515
13516
13517
13518
13519
13520
13521
13522
13523
13524
13525
13526
13527
13528
13529
13530
13531
13532
13533
13534
13535
13536
13537
13538
13539
13540
13541
13542
13543
13544
13545
13546
13547
13548
13549
13550
13551
13552
13553
13554
13555
13556
13557
13558
13559
13560
13561
13562
13563
13564
13565
13566
13567
13568
13569
13570
13571
13572
13573
13574
13575
13576
13577
13578
13579
13580
13581
13582
13583
13584
13585
13586
13587
13588
13589
13590
13591
13592
13593
13594
13595
13596
13597
13598
13599
13600
13601
13602
13603
13604
13605
13606
13607
13608
13609
13610
13611
13612
13613
13614
13615
13616
13617
13618
13619
13620
13621
13622
13623
13624
13625
13626
13627
13628
13629
13630
13631
13632
13633
13634
13635
13636
13637
13638
13639
13640
13641
13642
13643
13644
13645
13646
13647
13648
13649
13650
13651
13652
13653
13654
13655
13656
13657
13658
13659
13660
13661
13662
13663
13664
13665
13666
13667
13668
13669
13670
13671
13672
13673
13674
13675
13676
13677
13678
13679
13680
13681
13682
13683
13684
13685
13686
13687
13688
13689
13690
13691
13692
13693
13694
13695
13696
13697
13698
13699
13700
13701
13702
13703
13704
13705
13706
13707
13708
13709
13710
13711
13712
13713
13714
13715
13716
13717
13718
13719
13720
13721
13722
13723
13724
13725
13726
13727
13728
13729
13730
13731
13732
13733
13734
13735
13736
13737
13738
13739
13740
13741
13742
13743
13744
13745
13746
13747
13748
13749
13750
13751
13752
13753
13754
13755
13756
13757
13758
13759
13760
13761
13762
13763
13764
13765
13766
13767
13768
13769
13770
13771
13772
13773
13774
13775
13776
13777
13778
13779
13780
13781
13782
13783
13784
13785
13786
13787
13788
13789
13790
13791
13792
13793
13794
13795
13796
13797
13798
13799
13800
13801
13802
13803
13804
13805
13806
13807
13808
13809
13810
13811
13812
13813
13814
13815
13816
13817
13818
13819
13820
13821
13822
13823
13824
13825
13826
13827
13828
13829
13830
13831
13832
13833
13834
13835
13836
13837
13838
13839
13840
13841
13842
13843
13844
13845
13846
13847
13848
13849
13850
13851
13852
13853
13854
13855
13856
13857
13858
13859
13860
13861
13862
13863
13864
13865
13866
13867
13868
13869
13870
13871
13872
13873
13874
13875
13876
13877
13878
13879
13880
13881
13882
13883
13884
13885
13886
13887
13888
13889
13890
13891
13892
13893
13894
13895
13896
13897
13898
13899
13900
13901
13902
13903
13904
13905
13906
13907
13908
13909
13910
13911
13912
13913
13914
13915
13916
13917
13918
13919
13920
13921
13922
13923
13924
13925
13926
13927
13928
13929
13930
13931
13932
13933
13934
13935
13936
13937
13938
13939
13940
13941
13942
13943
13944
13945
13946
13947
13948
13949
13950
13951
13952
13953
13954
13955
13956
13957
13958
13959
13960
13961
13962
13963
13964
13965
13966
13967
13968
13969
13970
13971
13972
13973
13974
13975
13976
13977
13978
13979
13980
13981
13982
13983
13984
13985
13986
13987
13988
13989
13990
13991
13992
13993
13994
13995
13996
13997
13998
13999
14000
14001
14002
14003
14004
14005
14006
14007
14008
14009
14010
14011
14012
14013
14014
14015
14016
14017
14018
14019
14020
14021
14022
14023
14024
14025
14026
14027
14028
14029
14030
14031
14032
14033
14034
14035
14036
14037
14038
14039
14040
14041
14042
14043
14044
14045
14046
14047
14048
14049
14050
14051
14052
14053
14054
14055
14056
14057
14058
14059
14060
14061
14062
14063
14064
14065
14066
14067
14068
14069
14070
14071
14072
14073
14074
14075
14076
14077
14078
14079
14080
14081
14082
14083
14084
14085
14086
14087
14088
14089
14090
14091
14092
14093
14094
14095
14096
14097
14098
14099
14100
14101
14102
14103
14104
14105
14106
14107
14108
14109
14110
14111
14112
14113
14114
14115
14116
14117
14118
14119
14120
14121
14122
14123
14124
14125
14126
14127
14128
14129
14130
14131
14132
14133
14134
14135
14136
14137
14138
14139
14140
14141
14142
14143
14144
14145
14146
14147
14148
14149
14150
14151
14152
14153
14154
14155
14156
14157
14158
14159
14160
14161
14162
14163
14164
14165
14166
14167
14168
14169
14170
14171
14172
14173
14174
14175
14176
14177
14178
14179
14180
14181
14182
14183
14184
14185
14186
14187
14188
14189
14190
14191
14192
14193
14194
14195
14196
14197
14198
14199
14200
14201
14202
14203
14204
14205
14206
14207
14208
14209
14210
14211
14212
14213
14214
14215
14216
14217
14218
14219
14220
14221
14222
14223
14224
14225
14226
14227
14228
14229
14230
14231
14232
14233
14234
14235
14236
14237
14238
14239
14240
14241
14242
14243
14244
14245
14246
14247
14248
14249
14250
14251
14252
14253
14254
14255
14256
14257
14258
14259
14260
14261
14262
14263
14264
14265
14266
14267
14268
14269
14270
14271
14272
14273
14274
14275
14276
14277
14278
14279
14280
14281
14282
14283
14284
14285
14286
14287
14288
14289
14290
14291
14292
14293
14294
14295
14296
14297
14298
14299
14300
14301
14302
14303
14304
14305
14306
14307
14308
14309
14310
14311
14312
14313
14314
14315
14316
14317
14318
14319
14320
14321
14322
14323
14324
14325
14326
14327
14328
14329
14330
14331
14332
14333
14334
14335
14336
14337
14338
14339
14340
14341
14342
14343
14344
14345
14346
14347
14348
14349
14350
14351
14352
14353
14354
14355
14356
14357
14358
14359
14360
14361
14362
14363
14364
14365
14366
14367
14368
14369
14370
14371
14372
14373
14374
14375
14376
14377
14378
14379
14380
14381
14382
14383
14384
14385
14386
14387
14388
14389
14390
14391
14392
14393
14394
14395
14396
14397
14398
14399
14400
14401
14402
14403
14404
14405
14406
14407
14408
14409
14410
14411
14412
14413
14414
14415
14416
14417
14418
14419
14420
14421
14422
14423
14424
14425
14426
14427
14428
14429
14430
14431
14432
14433
14434
14435
14436
14437
14438
14439
14440
14441
14442
14443
14444
14445
14446
14447
14448
14449
14450
14451
14452
14453
14454
14455
14456
14457
14458
14459
14460
14461
14462
14463
14464
14465
14466
14467
14468
14469
14470
14471
14472
14473
14474
14475
14476
14477
14478
14479
14480
14481
14482
14483
14484
14485
14486
14487
14488
14489
14490
14491
14492
14493
14494
14495
14496
14497
14498
14499
14500
14501
14502
14503
14504
14505
14506
14507
14508
14509
14510
14511
14512
14513
14514
14515
14516
14517
14518
14519
14520
14521
14522
14523
14524
14525
14526
14527
14528
14529
14530
14531
14532
14533
14534
14535
14536
14537
14538
14539
14540
14541
14542
14543
14544
14545
14546
14547
14548
14549
14550
14551
14552
14553
14554
14555
14556
14557
14558
14559
14560
14561
14562
14563
14564
14565
14566
14567
14568
14569
14570
14571
14572
14573
14574
14575
14576
14577
14578
14579
14580
14581
14582
14583
14584
14585
14586
14587
14588
14589
14590
14591
14592
14593
14594
14595
14596
14597
14598
14599
14600
14601
14602
14603
14604
14605
14606
14607
14608
14609
14610
14611
14612
14613
14614
14615
14616
14617
14618
14619
14620
14621
14622
14623
14624
14625
14626
14627
14628
14629
14630
14631
14632
14633
14634
14635
14636
14637
14638
14639
14640
14641
14642
14643
14644
14645
14646
14647
14648
14649
14650
14651
14652
14653
14654
14655
14656
14657
14658
14659
14660
14661
14662
14663
14664
14665
14666
14667
14668
14669
14670
14671
14672
14673
14674
14675
14676
14677
14678
14679
14680
14681
14682
14683
14684
14685
14686
14687
14688
14689
14690
14691
14692
14693
14694
14695
14696
14697
14698
14699
14700
14701
14702
14703
14704
14705
14706
14707
14708
14709
14710
14711
14712
14713
14714
14715
14716
14717
14718
14719
14720
14721
14722
14723
14724
14725
14726
14727
14728
14729
14730
14731
14732
14733
14734
14735
14736
14737
14738
14739
14740
14741
14742
14743
14744
14745
14746
14747
14748
14749
14750
14751
14752
14753
14754
14755
14756
14757
14758
14759
14760
14761
14762
14763
14764
14765
14766
14767
14768
14769
14770
14771
14772
14773
14774
14775
14776
14777
14778
14779
14780
14781
14782
14783
14784
14785
14786
14787
14788
14789
14790
14791
14792
14793
14794
14795
14796
14797
14798
14799
14800
14801
14802
14803
14804
14805
14806
14807
14808
14809
14810
14811
14812
14813
14814
14815
14816
14817
14818
14819
14820
14821
14822
14823
14824
14825
14826
14827
14828
14829
14830
14831
14832
14833
14834
14835
14836
14837
14838
14839
14840
14841
14842
14843
14844
14845
14846
14847
14848
14849
14850
14851
14852
14853
14854
14855
14856
14857
14858
14859
14860
14861
14862
14863
14864
14865
14866
14867
14868
14869
14870
14871
14872
14873
14874
14875
14876
14877
14878
14879
14880
14881
14882
14883
14884
14885
14886
14887
14888
14889
14890
14891
14892
14893
14894
14895
14896
14897
14898
14899
14900
14901
14902
14903
14904
14905
14906
14907
14908
14909
14910
14911
14912
14913
14914
14915
14916
14917
14918
14919
14920
14921
14922
14923
14924
14925
14926
14927
14928
14929
14930
14931
14932
14933
14934
14935
14936
14937
14938
14939
14940
14941
14942
14943
14944
14945
14946
14947
14948
14949
14950
14951
14952
14953
14954
14955
14956
14957
14958
14959
14960
14961
14962
14963
14964
14965
14966
14967
14968
14969
14970
14971
14972
14973
14974
14975
14976
14977
14978
14979
14980
14981
14982
14983
14984
14985
14986
14987
14988
14989
14990
14991
14992
14993
14994
14995
14996
14997
14998
14999
15000
15001
15002
15003
15004
15005
15006
15007
15008
15009
15010
15011
15012
15013
15014
15015
15016
15017
15018
15019
15020
15021
15022
15023
15024
15025
15026
15027
15028
15029
15030
15031
15032
15033
15034
15035
15036
15037
15038
15039
15040
15041
15042
15043
15044
15045
15046
15047
15048
15049
15050
15051
15052
15053
15054
15055
15056
15057
15058
15059
15060
15061
15062
15063
15064
15065
15066
15067
15068
15069
15070
15071
15072
15073
15074
15075
15076
15077
15078
15079
15080
15081
15082
15083
15084
15085
15086
15087
15088
15089
15090
15091
15092
15093
15094
15095
15096
15097
15098
15099
15100
15101
15102
15103
15104
15105
15106
15107
15108
15109
15110
15111
15112
15113
15114
15115
15116
15117
15118
15119
15120
15121
15122
15123
15124
15125
15126
15127
15128
15129
15130
15131
15132
15133
15134
15135
15136
15137
15138
15139
15140
15141
15142
15143
15144
15145
15146
15147
15148
15149
15150
15151
15152
15153
15154
15155
15156
15157
15158
15159
15160
15161
15162
15163
15164
15165
15166
15167
15168
15169
15170
15171
15172
15173
15174
15175
15176
15177
15178
15179
15180
15181
15182
15183
15184
15185
15186
15187
15188
15189
15190
15191
15192
15193
15194
15195
15196
15197
15198
15199
15200
15201
15202
15203
15204
15205
15206
15207
15208
15209
15210
15211
15212
15213
15214
15215
15216
15217
15218
15219
15220
15221
15222
15223
15224
15225
15226
15227
15228
15229
15230
15231
15232
15233
15234
15235
15236
15237
15238
15239
15240
15241
15242
15243
15244
15245
15246
15247
15248
15249
15250
15251
15252
15253
15254
15255
15256
15257
15258
15259
15260
15261
15262
15263
15264
15265
15266
15267
15268
15269
15270
15271
15272
15273
15274
15275
15276
15277
15278
15279
15280
15281
15282
15283
15284
15285
15286
15287
15288
15289
15290
15291
15292
15293
15294
15295
15296
15297
15298
15299
15300
15301
15302
15303
15304
15305
15306
15307
15308
15309
15310
15311
15312
15313
15314
15315
15316
15317
15318
15319
15320
15321
15322
15323
15324
15325
15326
15327
15328
15329
15330
15331
15332
15333
15334
15335
15336
15337
15338
15339
15340
15341
15342
15343
15344
15345
15346
15347
15348
15349
15350
15351
15352
15353
15354
15355
15356
15357
15358
15359
15360
15361
15362
15363
15364
15365
15366
15367
15368
15369
15370
15371
15372
15373
15374
15375
15376
15377
15378
15379
15380
15381
15382
15383
15384
15385
15386
15387
15388
15389
15390
15391
15392
15393
15394
15395
15396
15397
15398
15399
15400
15401
15402
15403
15404
15405
15406
15407
15408
15409
15410
15411
15412
15413
15414
15415
15416
15417
15418
15419
15420
15421
15422
15423
15424
15425
15426
15427
15428
15429
15430
15431
15432
15433
15434
15435
15436
15437
15438
15439
15440
15441
15442
15443
15444
15445
15446
15447
15448
15449
15450
15451
15452
15453
15454
15455
15456
15457
15458
15459
15460
15461
15462
15463
15464
15465
15466
15467
15468
15469
15470
15471
15472
15473
15474
15475
15476
15477
15478
15479
15480
15481
15482
15483
15484
15485
15486
15487
15488
15489
15490
15491
15492
15493
15494
15495
15496
15497
15498
15499
15500
15501
15502
15503
15504
15505
15506
15507
15508
15509
15510
15511
15512
15513
15514
15515
15516
15517
15518
15519
15520
15521
15522
15523
15524
15525
15526
15527
15528
15529
15530
15531
15532
15533
15534
15535
15536
15537
15538
15539
15540
15541
15542
15543
15544
15545
15546
15547
15548
15549
15550
15551
15552
15553
15554
15555
15556
15557
15558
15559
15560
15561
15562
15563
15564
15565
15566
15567
15568
15569
15570
15571
15572
15573
15574
15575
15576
15577
15578
15579
15580
15581
15582
15583
15584
15585
15586
15587
15588
15589
15590
15591
15592
15593
15594
15595
15596
15597
15598
15599
15600
15601
15602
15603
15604
15605
15606
15607
15608
15609
15610
15611
15612
15613
15614
15615
15616
15617
15618
15619
15620
15621
15622
15623
15624
15625
15626
15627
15628
15629
15630
15631
15632
15633
15634
15635
15636
15637
15638
15639
15640
15641
15642
15643
15644
15645
15646
15647
15648
15649
15650
15651
15652
15653
15654
15655
15656
15657
15658
15659
15660
15661
15662
15663
15664
15665
15666
15667
15668
15669
15670
15671
15672
15673
15674
15675
15676
15677
15678
15679
15680
15681
15682
15683
15684
15685
15686
15687
15688
15689
15690
15691
15692
15693
15694
15695
15696
15697
15698
15699
15700
15701
15702
15703
15704
15705
15706
15707
15708
15709
15710
15711
15712
15713
15714
15715
15716
15717
15718
15719
15720
15721
15722
15723
15724
15725
15726
15727
15728
15729
15730
15731
15732
15733
15734
15735
15736
15737
15738
15739
15740
15741
15742
15743
15744
15745
15746
15747
15748
15749
15750
15751
15752
15753
15754
15755
15756
15757
15758
15759
15760
15761
15762
15763
15764
15765
15766
15767
15768
15769
15770
15771
15772
15773
15774
15775
15776
15777
15778
15779
15780
15781
15782
15783
15784
15785
15786
15787
15788
15789
15790
15791
15792
15793
15794
15795
15796
15797
15798
15799
15800
15801
15802
15803
15804
15805
15806
15807
15808
15809
15810
15811
15812
15813
15814
15815
15816
15817
15818
15819
15820
15821
15822
15823
15824
15825
15826
15827
15828
15829
15830
15831
15832
15833
15834
15835
15836
15837
15838
15839
15840
15841
15842
15843
15844
15845
15846
15847
15848
15849
15850
15851
15852
15853
15854
15855
15856
15857
15858
15859
15860
15861
15862
15863
15864
15865
15866
15867
15868
15869
15870
15871
15872
15873
15874
15875
15876
15877
15878
15879
15880
15881
15882
15883
15884
15885
15886
15887
15888
15889
15890
15891
15892
15893
15894
15895
15896
15897
15898
15899
15900
15901
15902
15903
15904
15905
15906
15907
15908
15909
15910
15911
15912
15913
15914
15915
15916
15917
15918
15919
15920
15921
15922
15923
15924
15925
15926
15927
15928
15929
15930
15931
15932
15933
15934
15935
15936
15937
15938
15939
15940
15941
15942
15943
15944
15945
15946
15947
15948
15949
15950
15951
15952
15953
15954
15955
15956
15957
15958
15959
15960
15961
15962
15963
15964
15965
15966
15967
15968
15969
15970
15971
15972
15973
15974
15975
15976
15977
15978
15979
15980
15981
15982
15983
15984
15985
15986
15987
15988
15989
15990
15991
15992
15993
15994
15995
15996
15997
15998
15999
16000
16001
16002
16003
16004
16005
16006
16007
16008
16009
16010
16011
16012
16013
16014
16015
16016
16017
16018
16019
16020
16021
16022
16023
16024
16025
16026
16027
16028
16029
16030
16031
16032
16033
16034
16035
16036
16037
16038
16039
16040
16041
16042
16043
16044
16045
16046
16047
16048
16049
16050
16051
16052
16053
16054
16055
16056
16057
16058
16059
16060
16061
16062
16063
16064
16065
16066
16067
16068
16069
16070
16071
16072
16073
16074
16075
16076
16077
16078
16079
16080
16081
16082
16083
16084
16085
16086
16087
16088
16089
16090
16091
16092
16093
16094
16095
16096
16097
16098
16099
16100
16101
16102
16103
16104
16105
16106
16107
16108
16109
16110
16111
16112
16113
16114
16115
16116
16117
16118
16119
16120
16121
16122
16123
16124
16125
16126
16127
16128
16129
16130
16131
16132
16133
16134
16135
16136
16137
16138
16139
16140
16141
16142
16143
16144
16145
16146
16147
16148
16149
16150
16151
16152
16153
16154
16155
16156
16157
16158
16159
16160
16161
16162
16163
16164
16165
16166
16167
16168
16169
16170
16171
16172
16173
16174
16175
16176
16177
16178
16179
16180
16181
16182
16183
16184
16185
16186
16187
16188
16189
16190
16191
16192
16193
16194
16195
16196
16197
16198
16199
16200
16201
16202
16203
16204
16205
16206
16207
16208
16209
16210
16211
16212
16213
16214
16215
16216
16217
16218
16219
16220
16221
16222
16223
16224
16225
16226
16227
16228
16229
16230
16231
16232
16233
16234
16235
16236
16237
16238
16239
16240
16241
16242
16243
16244
16245
16246
16247
16248
16249
16250
16251
16252
16253
16254
16255
16256
16257
16258
16259
16260
16261
16262
16263
16264
16265
16266
16267
16268
16269
16270
16271
16272
16273
16274
16275
16276
16277
16278
16279
16280
16281
16282
16283
16284
16285
16286
16287
16288
16289
16290
16291
16292
16293
16294
16295
16296
16297
16298
16299
16300
16301
16302
16303
16304
16305
16306
16307
16308
16309
16310
16311
16312
16313
16314
16315
16316
16317
16318
16319
16320
16321
16322
16323
16324
16325
16326
16327
16328
16329
16330
16331
16332
16333
16334
16335
16336
16337
16338
16339
16340
16341
16342
16343
16344
16345
16346
16347
16348
16349
16350
16351
16352
16353
16354
16355
16356
16357
16358
16359
16360
16361
16362
16363
16364
16365
16366
16367
16368
16369
16370
16371
16372
16373
16374
16375
16376
16377
16378
16379
16380
16381
16382
16383
16384
16385
16386
16387
16388
16389
16390
16391
16392
16393
16394
16395
16396
16397
16398
16399
16400
16401
16402
16403
16404
16405
16406
16407
16408
16409
16410
16411
16412
16413
16414
16415
16416
16417
16418
16419
16420
16421
16422
16423
16424
16425
16426
16427
16428
16429
16430
16431
16432
16433
16434
16435
16436
16437
16438
16439
16440
16441
16442
16443
16444
16445
16446
16447
16448
16449
16450
16451
16452
16453
16454
16455
16456
16457
16458
16459
16460
16461
16462
16463
16464
16465
16466
16467
16468
16469
16470
16471
16472
16473
16474
16475
16476
16477
16478
16479
16480
16481
16482
16483
16484
16485
16486
16487
16488
16489
16490
16491
16492
16493
16494
16495
16496
16497
16498
16499
16500
16501
16502
16503
16504
16505
16506
16507
16508
16509
16510
16511
16512
16513
16514
16515
16516
16517
16518
16519
16520
16521
16522
16523
16524
16525
16526
16527
16528
16529
16530
16531
16532
16533
16534
16535
16536
16537
16538
16539
16540
16541
16542
16543
16544
16545
16546
16547
16548
16549
16550
16551
16552
16553
16554
16555
16556
16557
16558
16559
16560
16561
16562
16563
16564
16565
16566
16567
16568
16569
16570
16571
16572
16573
16574
16575
16576
16577
16578
16579
16580
16581
16582
16583
16584
16585
16586
16587
16588
16589
16590
16591
16592
16593
16594
16595
16596
16597
16598
16599
16600
16601
16602
16603
16604
16605
16606
16607
16608
16609
16610
16611
16612
16613
16614
16615
16616
16617
16618
16619
16620
16621
16622
16623
16624
16625
16626
16627
16628
16629
16630
16631
16632
16633
16634
16635
16636
16637
16638
16639
16640
16641
16642
16643
16644
16645
16646
16647
16648
16649
16650
16651
16652
16653
16654
16655
16656
16657
16658
16659
16660
16661
16662
16663
16664
16665
16666
16667
16668
16669
16670
16671
16672
16673
16674
16675
16676
16677
16678
16679
16680
16681
16682
16683
16684
16685
16686
16687
16688
16689
16690
16691
16692
16693
16694
16695
16696
16697
16698
16699
16700
16701
16702
16703
16704
16705
16706
16707
16708
16709
16710
16711
16712
16713
16714
16715
16716
16717
16718
16719
16720
16721
16722
16723
16724
16725
16726
16727
16728
16729
16730
16731
16732
16733
16734
16735
16736
16737
16738
16739
16740
16741
16742
16743
16744
16745
16746
16747
16748
16749
16750
16751
16752
16753
16754
16755
16756
16757
16758
16759
16760
16761
16762
16763
16764
16765
16766
16767
16768
16769
16770
16771
16772
16773
16774
16775
16776
16777
16778
16779
16780
16781
16782
16783
16784
16785
16786
16787
16788
16789
16790
16791
16792
16793
16794
16795
16796
16797
16798
16799
16800
16801
16802
16803
16804
16805
16806
16807
16808
16809
16810
16811
16812
16813
16814
16815
16816
16817
16818
16819
16820
16821
16822
16823
16824
16825
16826
16827
16828
16829
16830
16831
16832
16833
16834
16835
16836
16837
16838
16839
16840
16841
16842
16843
16844
16845
16846
16847
16848
16849
16850
16851
16852
16853
16854
16855
16856
16857
16858
16859
16860
16861
16862
16863
16864
16865
16866
16867
16868
16869
16870
16871
16872
16873
16874
16875
16876
16877
16878
16879
16880
16881
16882
16883
16884
16885
16886
16887
16888
16889
16890
16891
16892
16893
16894
16895
16896
16897
16898
16899
16900
16901
16902
16903
16904
16905
16906
16907
16908
16909
16910
16911
16912
16913
16914
16915
16916
16917
16918
16919
16920
16921
16922
16923
16924
16925
16926
16927
16928
16929
16930
16931
16932
16933
16934
16935
16936
16937
16938
16939
16940
16941
16942
16943
16944
16945
16946
16947
16948
16949
16950
16951
16952
16953
16954
16955
16956
16957
16958
16959
16960
16961
16962
16963
16964
16965
16966
16967
16968
16969
16970
16971
16972
16973
16974
16975
16976
16977
16978
16979
16980
16981
16982
16983
16984
16985
16986
16987
16988
16989
16990
16991
16992
16993
16994
16995
16996
16997
16998
16999
17000
17001
17002
17003
17004
17005
17006
17007
17008
17009
17010
17011
17012
17013
17014
17015
17016
17017
17018
17019
17020
17021
17022
17023
17024
17025
17026
17027
17028
17029
17030
17031
17032
17033
17034
17035
17036
17037
17038
17039
17040
17041
17042
17043
17044
17045
17046
17047
17048
17049
17050
17051
17052
17053
17054
17055
17056
17057
17058
17059
17060
17061
17062
17063
17064
17065
17066
17067
17068
17069
17070
17071
17072
17073
17074
17075
17076
17077
17078
17079
17080
17081
17082
17083
17084
17085
17086
17087
17088
17089
17090
17091
17092
17093
17094
17095
17096
17097
17098
17099
17100
17101
17102
17103
17104
17105
17106
17107
17108
17109
17110
17111
17112
17113
17114
17115
17116
17117
17118
17119
17120
17121
17122
17123
17124
17125
17126
17127
17128
17129
17130
17131
17132
17133
17134
17135
17136
17137
17138
17139
17140
17141
17142
17143
17144
17145
17146
17147
17148
17149
17150
17151
17152
17153
17154
17155
17156
17157
17158
17159
17160
17161
17162
17163
17164
17165
17166
17167
17168
17169
17170
17171
17172
17173
17174
17175
17176
17177
17178
17179
17180
17181
17182
17183
17184
17185
17186
17187
17188
17189
17190
17191
17192
17193
17194
17195
17196
17197
17198
17199
17200
17201
17202
17203
17204
17205
17206
17207
17208
17209
17210
17211
17212
17213
17214
17215
17216
17217
17218
17219
17220
17221
17222
17223
17224
17225
17226
17227
17228
17229
17230
17231
17232
17233
17234
17235
17236
17237
17238
17239
17240
17241
17242
17243
17244
17245
17246
17247
17248
17249
17250
17251
17252
17253
17254
17255
17256
17257
17258
17259
17260
17261
17262
17263
17264
17265
17266
17267
17268
17269
17270
17271
17272
17273
17274
17275
17276
17277
17278
17279
17280
17281
17282
17283
17284
17285
17286
17287
17288
17289
17290
17291
17292
17293
17294
17295
17296
17297
17298
17299
17300
17301
17302
17303
17304
17305
17306
17307
17308
17309
17310
17311
17312
17313
17314
17315
17316
17317
17318
17319
17320
17321
17322
17323
17324
17325
17326
17327
17328
17329
17330
17331
17332
17333
17334
17335
17336
17337
17338
17339
17340
17341
17342
17343
17344
17345
17346
17347
17348
17349
17350
17351
17352
17353
17354
17355
17356
17357
17358
17359
17360
17361
17362
17363
17364
17365
17366
17367
17368
17369
17370
17371
17372
17373
17374
17375
17376
17377
17378
17379
17380
17381
17382
17383
17384
17385
17386
17387
17388
17389
17390
17391
17392
17393
17394
17395
17396
17397
17398
17399
17400
17401
17402
17403
17404
17405
17406
17407
17408
17409
17410
17411
17412
17413
17414
17415
17416
17417
17418
17419
17420
17421
17422
17423
17424
17425
17426
17427
17428
17429
17430
17431
17432
17433
17434
17435
17436
17437
17438
17439
17440
17441
17442
17443
17444
17445
17446
17447
17448
17449
17450
17451
17452
17453
17454
17455
17456
17457
17458
17459
17460
17461
17462
17463
17464
17465
17466
17467
17468
17469
17470
17471
17472
17473
17474
17475
17476
17477
17478
17479
17480
17481
17482
17483
17484
17485
17486
17487
17488
17489
17490
17491
17492
17493
17494
17495
17496
17497
17498
17499
17500
17501
17502
17503
17504
17505
17506
17507
17508
17509
17510
17511
17512
17513
17514
17515
17516
17517
17518
17519
17520
17521
17522
17523
17524
17525
17526
17527
17528
17529
17530
17531
17532
17533
17534
17535
17536
17537
17538
17539
17540
17541
17542
17543
17544
17545
17546
17547
17548
17549
17550
17551
17552
17553
17554
17555
17556
17557
17558
17559
17560
17561
17562
17563
17564
17565
17566
17567
17568
17569
17570
17571
17572
17573
17574
17575
17576
17577
17578
17579
17580
17581
17582
17583
17584
17585
17586
17587
17588
17589
17590
17591
17592
17593
17594
17595
17596
17597
17598
17599
17600
17601
17602
17603
17604
17605
17606
17607
17608
17609
17610
17611
17612
17613
17614
17615
17616
17617
17618
17619
17620
17621
17622
17623
17624
17625
17626
17627
17628
17629
17630
17631
17632
17633
17634
17635
17636
17637
17638
17639
17640
17641
17642
17643
17644
17645
17646
17647
17648
17649
17650
17651
17652
17653
17654
17655
17656
17657
17658
17659
17660
17661
17662
17663
17664
17665
17666
17667
17668
17669
17670
17671
17672
17673
17674
17675
17676
17677
17678
17679
17680
17681
17682
17683
17684
17685
17686
17687
17688
17689
17690
17691
17692
17693
17694
17695
17696
17697
17698
17699
17700
17701
17702
17703
17704
17705
17706
17707
17708
17709
17710
17711
17712
17713
17714
17715
17716
17717
17718
17719
17720
17721
17722
17723
17724
17725
17726
17727
17728
17729
17730
17731
17732
17733
17734
17735
17736
17737
17738
17739
17740
17741
17742
17743
17744
17745
17746
17747
17748
17749
17750
17751
17752
17753
17754
17755
17756
17757
17758
17759
17760
17761
17762
17763
17764
17765
17766
17767
17768
17769
17770
17771
17772
17773
17774
17775
17776
17777
17778
17779
17780
17781
17782
17783
17784
17785
17786
17787
17788
17789
17790
17791
17792
17793
17794
17795
17796
17797
17798
17799
17800
17801
17802
17803
17804
17805
17806
17807
17808
17809
17810
17811
17812
17813
17814
17815
17816
17817
17818
17819
17820
17821
17822
17823
17824
17825
17826
17827
17828
17829
17830
17831
17832
17833
17834
17835
17836
17837
17838
17839
17840
17841
17842
17843
17844
17845
17846
17847
17848
17849
17850
17851
17852
17853
17854
17855
17856
17857
17858
17859
17860
17861
17862
17863
17864
17865
17866
17867
17868
17869
17870
17871
17872
17873
17874
17875
17876
17877
17878
17879
17880
17881
17882
17883
17884
17885
17886
17887
17888
17889
17890
17891
17892
17893
17894
17895
17896
17897
17898
17899
17900
17901
17902
17903
17904
17905
17906
17907
17908
17909
17910
17911
17912
17913
17914
17915
17916
17917
17918
17919
17920
17921
17922
17923
17924
17925
17926
17927
17928
17929
17930
17931
17932
17933
17934
17935
17936
17937
17938
17939
17940
17941
17942
17943
17944
17945
17946
17947
17948
17949
17950
17951
17952
17953
17954
17955
17956
17957
17958
17959
17960
17961
17962
17963
17964
17965
17966
17967
17968
17969
17970
17971
17972
17973
17974
17975
17976
17977
17978
17979
17980
17981
17982
17983
17984
17985
17986
17987
17988
17989
17990
17991
17992
17993
17994
17995
17996
17997
17998
17999
18000
18001
18002
18003
18004
18005
18006
18007
18008
18009
18010
18011
18012
18013
18014
18015
18016
18017
18018
18019
18020
18021
18022
18023
18024
18025
18026
18027
18028
18029
18030
18031
18032
18033
18034
18035
18036
18037
18038
18039
18040
18041
18042
18043
18044
18045
18046
18047
18048
18049
18050
18051
18052
18053
18054
18055
18056
18057
18058
18059
18060
18061
18062
18063
18064
18065
18066
18067
18068
18069
18070
18071
18072
18073
18074
18075
18076
18077
18078
18079
18080
18081
18082
18083
18084
18085
18086
18087
18088
18089
18090
18091
18092
18093
18094
18095
18096
18097
18098
18099
18100
18101
18102
18103
18104
18105
18106
18107
18108
18109
18110
18111
18112
18113
18114
18115
18116
18117
18118
18119
18120
18121
18122
18123
18124
18125
18126
18127
18128
18129
18130
18131
18132
18133
18134
18135
18136
18137
18138
18139
18140
18141
18142
18143
18144
18145
18146
18147
18148
18149
18150
18151
18152
18153
18154
18155
18156
18157
18158
18159
18160
18161
18162
18163
18164
18165
18166
18167
18168
18169
18170
18171
18172
18173
18174
18175
18176
18177
18178
18179
18180
18181
18182
18183
18184
18185
18186
18187
18188
18189
18190
18191
18192
18193
18194
18195
18196
18197
18198
18199
18200
18201
18202
18203
18204
18205
18206
18207
18208
18209
18210
18211
18212
18213
18214
18215
18216
18217
18218
18219
18220
18221
18222
18223
18224
18225
18226
18227
18228
18229
18230
18231
18232
18233
18234
18235
18236
18237
18238
18239
18240
18241
18242
18243
18244
18245
18246
18247
18248
18249
18250
18251
18252
18253
18254
18255
18256
18257
18258
18259
18260
18261
18262
18263
18264
18265
18266
18267
18268
18269
18270
18271
18272
18273
18274
18275
18276
18277
18278
18279
18280
18281
18282
18283
18284
18285
18286
18287
18288
18289
18290
18291
18292
18293
18294
18295
18296
18297
18298
18299
18300
18301
18302
18303
18304
18305
18306
18307
18308
18309
18310
18311
18312
18313
18314
18315
18316
18317
18318
18319
18320
18321
18322
18323
18324
18325
18326
18327
18328
18329
18330
18331
18332
18333
18334
18335
18336
18337
18338
18339
18340
18341
18342
18343
18344
18345
18346
18347
18348
18349
18350
18351
18352
18353
18354
18355
18356
18357
18358
18359
18360
18361
18362
18363
18364
18365
18366
18367
18368
18369
18370
18371
18372
18373
18374
18375
18376
18377
18378
18379
18380
18381
18382
18383
18384
18385
18386
18387
18388
18389
18390
18391
18392
18393
18394
18395
18396
18397
18398
18399
18400
18401
18402
18403
18404
18405
18406
18407
18408
18409
18410
18411
18412
18413
18414
18415
18416
18417
18418
18419
18420
18421
18422
18423
18424
18425
18426
18427
18428
18429
18430
18431
18432
18433
18434
18435
18436
18437
18438
18439
18440
18441
18442
18443
18444
18445
18446
18447
18448
18449
18450
18451
18452
18453
18454
18455
18456
18457
18458
18459
18460
18461
18462
18463
18464
18465
18466
18467
18468
18469
18470
18471
18472
18473
18474
18475
18476
18477
18478
18479
18480
18481
18482
18483
18484
18485
18486
18487
18488
18489
18490
18491
18492
18493
18494
18495
18496
18497
18498
18499
18500
18501
18502
18503
18504
18505
18506
18507
18508
18509
18510
18511
18512
18513
18514
18515
18516
18517
18518
18519
18520
18521
18522
18523
18524
18525
18526
18527
18528
18529
18530
18531
18532
18533
18534
18535
18536
18537
18538
18539
18540
18541
18542
18543
18544
18545
18546
18547
18548
18549
18550
18551
18552
18553
18554
18555
18556
18557
18558
18559
18560
18561
18562
18563
18564
18565
18566
18567
18568
18569
18570
18571
18572
18573
18574
18575
18576
18577
18578
18579
18580
18581
18582
18583
18584
18585
18586
18587
18588
18589
18590
18591
18592
18593
18594
18595
18596
18597
18598
18599
18600
18601
18602
18603
18604
18605
18606
18607
18608
18609
18610
18611
18612
18613
18614
18615
18616
18617
18618
18619
18620
18621
18622
18623
18624
18625
18626
18627
18628
18629
18630
18631
18632
18633
18634
18635
18636
18637
18638
18639
18640
18641
18642
18643
18644
18645
18646
18647
18648
18649
18650
18651
18652
18653
18654
18655
18656
18657
18658
18659
18660
18661
18662
18663
18664
18665
18666
18667
18668
18669
18670
18671
18672
18673
18674
18675
18676
18677
18678
18679
18680
18681
18682
18683
18684
18685
18686
18687
18688
18689
18690
18691
18692
18693
18694
18695
18696
18697
18698
18699
18700
18701
18702
18703
18704
18705
18706
18707
18708
18709
18710
18711
18712
18713
18714
18715
18716
18717
18718
18719
18720
18721
18722
18723
18724
18725
18726
18727
18728
18729
18730
18731
18732
18733
18734
18735
18736
18737
18738
18739
18740
18741
18742
18743
18744
18745
18746
18747
18748
18749
18750
18751
18752
18753
18754
18755
18756
18757
18758
18759
18760
18761
18762
18763
18764
18765
18766
18767
18768
18769
18770
18771
18772
18773
18774
18775
18776
18777
18778
18779
18780
18781
18782
18783
18784
18785
18786
18787
18788
18789
18790
18791
18792
18793
18794
18795
18796
18797
18798
18799
18800
18801
18802
18803
18804
18805
18806
18807
18808
18809
18810
18811
18812
18813
18814
18815
18816
18817
18818
18819
18820
18821
18822
18823
18824
18825
18826
18827
18828
18829
18830
18831
18832
18833
18834
18835
18836
18837
18838
18839
18840
18841
18842
18843
18844
18845
18846
18847
18848
18849
18850
18851
18852
18853
18854
18855
18856
18857
18858
18859
18860
18861
18862
18863
18864
18865
18866
18867
18868
18869
18870
18871
18872
18873
18874
18875
18876
18877
18878
18879
18880
18881
18882
18883
18884
18885
18886
18887
18888
18889
18890
18891
18892
18893
18894
18895
18896
18897
18898
18899
18900
18901
18902
18903
18904
18905
18906
18907
18908
18909
18910
18911
18912
18913
18914
18915
18916
18917
18918
18919
18920
18921
18922
18923
18924
18925
18926
18927
18928
18929
18930
18931
18932
18933
18934
18935
18936
18937
18938
18939
18940
18941
18942
18943
18944
18945
18946
18947
18948
18949
18950
18951
18952
18953
18954
18955
18956
18957
18958
18959
18960
18961
18962
18963
18964
18965
18966
18967
18968
18969
18970
18971
18972
18973
18974
18975
18976
18977
18978
18979
18980
18981
18982
18983
18984
18985
18986
18987
18988
18989
18990
18991
18992
18993
18994
18995
18996
18997
18998
18999
19000
19001
19002
19003
19004
19005
19006
19007
19008
19009
19010
19011
19012
19013
19014
19015
19016
19017
19018
19019
19020
19021
19022
19023
19024
19025
19026
19027
19028
19029
19030
19031
19032
19033
19034
19035
19036
19037
19038
19039
19040
19041
19042
19043
19044
19045
19046
19047
19048
19049
19050
19051
19052
19053
19054
19055
19056
19057
19058
19059
19060
19061
19062
19063
19064
19065
19066
19067
19068
19069
19070
19071
19072
19073
19074
19075
19076
19077
19078
19079
19080
19081
19082
19083
19084
19085
19086
19087
19088
19089
19090
19091
19092
19093
19094
19095
19096
19097
19098
19099
19100
19101
19102
19103
19104
19105
19106
19107
19108
19109
19110
19111
19112
19113
19114
19115
19116
19117
19118
19119
19120
19121
19122
19123
19124
19125
19126
19127
19128
19129
19130
19131
19132
19133
19134
19135
19136
19137
19138
19139
19140
19141
19142
19143
19144
19145
19146
19147
19148
19149
19150
19151
19152
19153
19154
19155
19156
19157
19158
19159
19160
19161
19162
19163
19164
19165
19166
19167
19168
19169
19170
19171
19172
19173
19174
19175
19176
19177
19178
19179
19180
19181
19182
19183
19184
19185
19186
19187
19188
19189
19190
19191
19192
19193
19194
19195
19196
19197
19198
19199
19200
19201
19202
19203
19204
19205
19206
19207
19208
19209
19210
19211
19212
19213
19214
19215
19216
19217
19218
19219
19220
19221
19222
19223
19224
19225
19226
19227
19228
19229
19230
19231
19232
19233
19234
19235
19236
19237
19238
19239
19240
19241
19242
19243
19244
19245
19246
19247
19248
19249
19250
19251
19252
19253
19254
19255
19256
19257
19258
19259
19260
19261
19262
19263
19264
19265
19266
19267
19268
19269
19270
19271
19272
19273
19274
19275
19276
19277
19278
19279
19280
19281
19282
19283
19284
19285
19286
19287
19288
19289
19290
19291
19292
19293
19294
19295
19296
19297
19298
19299
19300
19301
19302
19303
19304
19305
19306
19307
19308
19309
19310
19311
19312
19313
19314
19315
19316
19317
19318
19319
19320
19321
19322
19323
19324
19325
19326
19327
19328
19329
19330
19331
19332
19333
19334
19335
19336
19337
19338
19339
19340
19341
19342
19343
19344
19345
19346
19347
19348
19349
19350
19351
19352
19353
19354
19355
19356
19357
19358
19359
19360
19361
19362
19363
19364
19365
19366
19367
19368
19369
19370
19371
19372
19373
19374
19375
19376
19377
19378
19379
19380
19381
19382
19383
19384
19385
19386
19387
19388
19389
19390
19391
19392
19393
19394
19395
19396
19397
19398
19399
19400
19401
19402
19403
19404
19405
19406
19407
19408
19409
19410
19411
19412
19413
19414
19415
19416
19417
19418
19419
19420
19421
19422
19423
19424
19425
19426
19427
19428
19429
19430
19431
19432
19433
19434
19435
19436
19437
19438
19439
19440
19441
19442
19443
19444
19445
19446
19447
19448
19449
19450
19451
19452
19453
19454
19455
19456
19457
19458
19459
19460
19461
19462
19463
19464
19465
19466
19467
19468
19469
19470
19471
19472
19473
19474
19475
19476
19477
19478
19479
19480
19481
19482
19483
19484
19485
19486
19487
19488
19489
19490
19491
19492
19493
# drakx messages in Simplified Chinese
# Copyright (C) 2000 Free Software Foundation, Inc.
# Danny Zeng <danny@zeng.com.cn>, 2000, 2002
# Jesse Kuang <kjx@mandrakesoft.com>, 2002
# Shiyu Tang <shiyutang@netscape.net>, 2003
# Funda Wang <fundawang@linux.net.cn>, 2002,2003
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX 9.2\n"
"POT-Creation-Date: 2003-08-13 03:40+0200\n"
"PO-Revision-Date: 2003-08-01 18:54+0200\n"
"Last-Translator: Funda Wang <fundawang@linux.net.cn>\n"
"Language-Team: Mandrake Internationalization Team <cooker-i18n@linux-"
"mandrake.com>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Scanning partitions to find mount points"
msgstr "正在扫描各个分区以查找装载点"
#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check additions/removals of suid root files."
msgstr "如果设为 yes, 就会检查 suid root 文件的添加/删除。"
#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
"0/1 for Local Config...\n"
msgstr ""
"%s: %s 需要主机名、MAC 地址、IP、nbi-image、代表 THIN_CLIENT 的 0/1、代表本地"
"配置的 0/1...\n"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Configuration changed - restart clusternfs/dhcpd?"
msgstr "配置已更改 - 重新启动 clusternfs/dhcpd 吗?"
#: ../../standalone/drakbackup:1
#, c-format
msgid "\t\tErase=%s"
msgstr "\t\t删除=%s"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Differential backups only save files that have changed or are new since the "
"original 'base' backup."
msgstr ""
#: ../../standalone/harddrake2:1
#, c-format
msgid "network printer port"
msgstr "网络打印机端口"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Please insert floppy disk:"
msgstr "请插入一张启动软盘:"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "PCMCIA"
msgstr "PCMCIA"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"备份分区表的大小和原来的有所不同\n"
"仍然继续吗?"
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Which username"
msgstr "哪个用户名"
#: ../../any.pm:1
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "要增加的条目是什么类型?"
#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Restore partition table"
msgstr "恢复分区表"
#: ../../printer/cups.pm:1
#, c-format
msgid "On CUPS server \"%s\""
msgstr "在 CUPS 服务器 “%s”"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Post-install configuration"
msgstr "安装后的配置"
#: ../../standalone/drakperm:1
#, c-format
msgid ""
"The current security level is %s\n"
"Select permissions to see/edit"
msgstr ""
"当前安全级别为 %s\n"
"选择要查看/编辑的权限"
#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Use ``%s'' instead"
msgstr "用“%s”代替"
#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Type"
msgstr "类型"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Also printers configured with the PPD files provided by their manufacturers "
"or with native CUPS drivers cannot be transferred."
msgstr ""
"\n"
"而且, 如果打印机需要使用厂商提供的 PPD 文件配置, 或打印机带有内置的 CUPS 驱动"
"程序, 它将无法迁移。"
#: ../../lang.pm:1
#, c-format
msgid "Sri Lanka"
msgstr "斯里兰卡"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"下列打印机\n"
"\n"
"%s%s\n"
"直接连接在您的系统"
#: ../../lang.pm:1
#, c-format
msgid "Central African Republic"
msgstr "中非共和国"
#: ../../network/network.pm:1
#, c-format
msgid "Gateway device"
msgstr "网关设备"
#: ../../standalone/drakfloppy:1
#, c-format
msgid "Advanced preferences"
msgstr "高级首选项"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Net Method:"
msgstr "网络方法:"
#: ../../harddrake/data.pm:1
#, c-format
msgid "Ethernetcard"
msgstr "以太网卡"
#: ../../security/l10n.pm:1
#, c-format
msgid "If set, send the mail report to this email address else send it to root"
msgstr "如果设置, 就将邮件报告发送到这个邮箱地址, 或者发给 root"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Parameters"
msgstr "参数"
#: ../../standalone/draksec:1
#, c-format
msgid "no"
msgstr "否"
#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Auto-detect"
msgstr "自动检测"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Interface:"
msgstr "网卡:"
#: ../../steps.pm:1
#, c-format
msgid "Select installation class"
msgstr "选择安装类别"
#: ../../standalone/drakbackup:1
#, c-format
msgid "on CDROM"
msgstr "在CDROM上"
#: ../../network/tools.pm:1
#, c-format
msgid ""
"The system doesn't seem to be connected to the Internet.\n"
"Try to reconfigure your connection."
msgstr ""
"看来系统没有连接到 Internet。\n"
"请重新尝试配置您的连接。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Connect your printer to a Linux server and let your Windows machine(s) "
"connect to it as a client.\n"
"\n"
"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""
"把打印机连接到一个 Linux 服务器然后让 Windows 机器作为客户连接服务器。\n"
"\n"
"您坚持要继续这样配置打印机吗?"
#: ../../lang.pm:1
#, c-format
msgid "Belarus"
msgstr "白俄罗斯"
#: ../../partition_table.pm:1
#, c-format
msgid "Error writing to file %s"
msgstr "写入文件 %s 失败"
#: ../../security/l10n.pm:1
#, c-format
msgid "Report check result to syslog"
msgstr "将检查结果报告给系统"
#: ../../services.pm:1
#, c-format
msgid ""
"apmd is used for monitoring battery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd 监视电池状态, 并通过 syslog 作记录。\n"
"它还能用来在电池不足时关闭机器。"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Use tape to backup"
msgstr "使用磁带备份"
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "The following packages are going to be installed"
msgstr "即将安装以下软件包"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "CUPS configuration"
msgstr "CUPS 打印配置"
#: ../../lang.pm:1
#, c-format
msgid "Hong Kong"
msgstr "中国香港特别行政区"
#: ../../install_interactive.pm:1
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "没有足够空闲空间分配给新分区"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Moving"
msgstr "移动中"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Drakbackup activities via %s:\n"
"\n"
msgstr ""
"\n"
"Drakbackup 使用 %s:\n"
"\n"
#: ../../standalone/draksec:1
#, c-format
msgid "yes"
msgstr "是"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "("
msgstr "("
#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"Welcome to The Network Configuration Wizard.\n"
"\n"
"We are about to configure your internet/network connection.\n"
"If you don't want to use the auto detection, deselect the checkbox.\n"
msgstr ""
"欢迎使用网络配置向导。\n"
"\n"
"现在即将配置您的 Internet/网络连接。\n"
"如果您不想自动检测, 请取消以下选项的选择。\n"
#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
msgid ")"
msgstr ")"
#: ../../lang.pm:1
#, c-format
msgid "Lebanon"
msgstr "黎巴嫩"
#: ../../mouse.pm:1
#, c-format
msgid "MM HitTablet"
msgstr "MM HitTablet"
#: ../../services.pm:1
#, c-format
msgid "Stop"
msgstr "停止"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Edit selected host"
msgstr "编辑选中的主机"
#: ../../standalone/drakbackup:1
#, c-format
msgid "No CD device defined!"
msgstr "没有发现 CD 设备!"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "\tUse .backupignore files\n"
msgstr "使用 .backupignore 文件"
#: ../../keyboard.pm:1
#, c-format
msgid "Bulgarian (phonetic)"
msgstr "保加利亚 (音标)"
#: ../../standalone/drakpxe:1
#, c-format
msgid "The DHCP start ip"
msgstr "DHCP 起始 IP"
#: ../../Xconfig/card.pm:1
#, c-format
msgid "256 kB"
msgstr "256 kB"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Don't rewind tape after backup"
msgstr "在备份后不倒带"
#: ../../any.pm:1
#, c-format
msgid "Bootloader main options"
msgstr "引导程序的主要选项"
#: ../../standalone.pm:1
#, c-format
msgid ""
"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=dev]"
msgstr ""
"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=dev]"
#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Tape"
msgstr "磁带机"
#: ../../lang.pm:1
#, c-format
msgid "Malaysia"
msgstr "马来西亚"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Scanning network..."
msgstr "正在扫描网络..."
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"With this option you will be able to restore any version\n"
" of your /etc directory."
msgstr "使用此选项您可把 /etc 目录恢复到任何以前的版本。"
#: ../../standalone/drakedm:1
#, c-format
msgid "The change is done, do you want to restart the dm service ?"
msgstr "更改已经完成, 您想要重新启动 dm 设备吗?"
#: ../../keyboard.pm:1
#, c-format
msgid "Swiss (French layout)"
msgstr "瑞士 (法语布局)"
#: ../../raid.pm:1
#, c-format
msgid "mkraid failed (maybe raidtools are missing?)"
msgstr "mkraid 失败 (可能缺少 raidtools?)"
#: ../../harddrake/data.pm:1
#, c-format
msgid "Webcam"
msgstr "摄像头"
#: ../../standalone/harddrake2:1
#, c-format
msgid "size of the (second level) cpu cache"
msgstr "CPU 二级缓存大小"
#: ../../harddrake/data.pm:1
#, c-format
msgid "Soundcard"
msgstr "声卡"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Search for files to restore"
msgstr "搜索要恢复的文件"
#: ../../lang.pm:1
#, c-format
msgid "Luxembourg"
msgstr "卢森堡"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr "要从命令行(终端窗口)打印文件, 请使用命令“%s <文件>”。\n"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Level %s\n"
msgstr "级别 %s\n"
#: ../../keyboard.pm:1
#, c-format
msgid "Syriac (phonetic)"
msgstr "叙利亚 (语音)"
#: ../../lang.pm:1
#, c-format
msgid "Iran"
msgstr "伊朗"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Bus"
msgstr "总线"
#: ../../lang.pm:1
#, c-format
msgid "Iraq"
msgstr "伊拉克"
#: ../../standalone/drakgw:1
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr "在当前的 %s 配置中发现可能的 LAN 地址冲突!\n"
#: ../../standalone/drakgw:1
#, c-format
msgid "Configuring..."
msgstr "正在配置..."
#: ../../standalone/drakgw:1
#, c-format
msgid "The setup has already been done, and it's currently enabled."
msgstr "配置已经完成，并已启用。"
#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
"对于大多数现代的电视卡, GNU/Linux 内核的 bttv 模块能自动检测正确的参数。\n"
"如果自动检测不适合您的卡, 您可以在这里强制设定正确的调协器及卡的类型。只有必"
"要时才设置电视卡参数"
#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Password (again)"
msgstr "密码(请再输一次)"
#: ../../standalone/drakfont:1
#, c-format
msgid "Search installed fonts"
msgstr "搜索已安装的字体"
#: ../../standalone/drakboot:1
#, c-format
msgid "Default desktop"
msgstr "默认桌面"
#: ../../lang.pm:1
#, c-format
msgid "Venezuela"
msgstr "委内瑞拉"
#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#: ../../standalone/drakconnect:1
#, c-format
msgid "IP address"
msgstr "IP 地址"
#: ../../install_interactive.pm:1
#, c-format
msgid "Choose the sizes"
msgstr "选择大小"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"List of data corrupted:\n"
"\n"
msgstr ""
"已毁坏数据的清单:\n"
"\n"
#: ../../fs.pm:1
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""
"只能显式装载。\n"
"(即, -a 选项将不会装载文件系统)"
#: ../../network/modem.pm:1
#, c-format
msgid ""
"Your modem isn't supported by the system.\n"
"Take a look at http://www.linmodems.org"
msgstr ""
"您的调制解调器不被系统支持。\n"
"请看看 http://www.linmodems.org"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose another partition"
msgstr "选择其它分区"
#: ../../standalone/drakperm:1
#, c-format
msgid "Current user"
msgstr "当前用户"
#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Username"
msgstr "用户名"
#: ../../keyboard.pm:1
#, c-format
msgid "Left \"Windows\" key"
msgstr "左侧“Windows”键"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "dhcpd Server Configuration"
msgstr "DHCPD 服务器配置"
#: ../../standalone/drakperm:1
#, c-format
msgid ""
"Used for directory:\n"
" only owner of directory or file in this directory can delete it"
msgstr ""
"用于目录:\n"
" 只有目录的所有者或目录中文件的所有者可以删除它"
#: ../../lang.pm:1
#, c-format
msgid "Guyana"
msgstr "圭亚那"
#: ../../printer/main.pm:1
#, c-format
msgid " on Novell server \"%s\", printer \"%s\""
msgstr "Novell 打印服务器“%s”上的打印机“%s”"
#: ../../standalone/drakfloppy:1
#, c-format
msgid "Remove a module"
msgstr "卸载模块"
#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
#: ../../standalone/drakconnect:1
#, c-format
msgid "Password"
msgstr "密码"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Advanced Configuration"
msgstr "高级配置"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Scanning on your HP multi-function device"
msgstr "正在扫描您的惠普多功能设备"
#: ../../any.pm:1
#, c-format
msgid "Root"
msgstr "根目录"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "选择加入一个已存在的 RAID"
#: ../../keyboard.pm:1
#, c-format
msgid "Turkish (modern \"Q\" model)"
msgstr "土耳其 (现代“Q”式)"
#: ../../standalone/drakboot:1
#, c-format
msgid "Lilo message not found"
msgstr "没有找到 LILO 消息"
#: ../../services.pm:1
#, c-format
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""
"自动重新生成 /boot下的\n"
"/usr/include/linux/{autoconf,version}.h头文件"
#: ../../standalone/drakfloppy:1
#, c-format
msgid "if needed"
msgstr "当需要时"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Failed..."
msgstr "恢复失败..."
#: ../../standalone/harddrake2:1
#, c-format
msgid "/Autodetect _jazz drives"
msgstr "/自动检测 jazz 驱动器(_J)"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Store the password for this system in drakbackup configuration."
msgstr ""
#: ../../install_messages.pm:1
#, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandrake "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrake Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License, you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of "
"downloading software components \n"
"from one of Mandrake Linux sites which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities. Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
"MandrakeSoft S.A. \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A. \n"
msgstr ""
"简介\n"
"\n"
"Mandrake Linux 发行版中提供的操作系统和各种程序 \n"
"在此后简称为\"本软件产品\"。本软件产品包括但不限于, \n"
"与Mandrake Linux 发行版的操作系统和各个部分有关的程序, 方法, 规则和文档。\n"
"\n"
"\n"
"1. 许可协议\n"
"\n"
"请仔细阅读此文档。此文档文档是您与 MandrakeSoft S.A. 之间关于本软件产品的一个"
"许可协议。\n"
"如果您安装, 复制, 或使用本软件产品, 即表明您接受并完全同意遵守本许可协议的内"
"容和条件。\n"
"如果您不同意本许可协议中的任何部分, 您将无权安装, 复制, 或使用本软件产品\n"
"任何试图不遵守本许可协议的内容和条件, 而安装, 复制, 或使用本软件产品的行为\n"
"都是非法的, 并将导致本许可协议赋予您的各种权利立即作废, \n"
"根据许可协议的条款, 您将必须立即销毁本软件产品的任何副本。\n"
"\n"
"\n"
"2. 有限担保\n"
"\n"
"本软件产品和附带的文档是一经发表即 \"不再修改\", 在法律允许的范围内没有任何担"
"保。\n"
"在法律允许的范围内 MandrakeSoft S.A. 对因使用或不能使用本软件产品而引起的, \n"
"特定的, 偶然的, 直接的, 间接的无论任何损失 (包括但不限于\n"
"生意的丧失, 生意的中断, 财务损失, 因法院裁决产生的法律费用和处罚\n"
"或其他因此产生的损失)将不承担责任, 即使 MandrakeSoft S.A. 已经被告知有发生这"
"种损失的可能性。\n"
"\n"
"在某些国家中关于拥有和使用被禁止的软件的有限责任\n"
"\n"
"在法律允许的范围内MandrakeSoft S.A. 或其分销者对因拥有或使用, \n"
"或从任何Mandrake Linux 的网站下载在某些国家中被当地法律禁止或限制的软件而引起"
"的, \n"
"特定的, 偶然的, 直接的, 间接的无论任何损失 (包括但不限于\n"
"生意的丧失, 生意的中断, 财务损失, 因法院裁决产生的法律费用和处罚\n"
"或其他因此产生的损失)将不承担责任。\n"
"这种有限责任适用但不限于本软件产品所包括的强大数据加密组件。 \n"
"\n"
"\n"
"3. GPL 许可协议和其它有关协议\n"
"\n"
"本软件产品由不同个人或组织所创作的各部分组成。这些部分基本上\n"
"都采用 GNU 通用公共许可协议(GNU General Public Licence), 此后简称为 \"GPL\", "
"或其它类似的许可协议的条款和条件。这些许可协议大多允许您使用, 复制, \n"
"修改或重新发表协议所覆盖的部分。使用这些软件之前, 请仔细阅读有关许可协议的条"
"款和条件。\n"
"如果对任何部分的许可协议有疑问, 应该与该部分的作者联系, MandrakeSoft 无法解答"
"这些问题。\n"
"由 MandrakeSoft S.A. 开发的各个程序受 GPL 许可协议保护。 由 MandrakeSoft S."
"A. 创作的文档采用一个特别的许可协议。 详细情况 \n"
"见有关的文档。\n"
"\n"
"\n"
"4. 知识产权\n"
"\n"
"本软件产品的各个组件的所有权利属于它们各自的作者, 并受到所有可适用于软件程"
"序\n"
"的知识产权和版权法律的保护。\n"
"MandrakeSoft S.A. 保留对本软件产品进行全面或部分的更改或调整的权利, \n"
"不论采用任何方法, 不论出于任何目的。\n"
"\"Mandrake\", \"Mandrake Linux\" 和相关的图样是 MandrakeSoft S.A. 的注册商"
"标。\n"
"\n"
"\n"
"5. 适用法律 \n"
"\n"
"如果本协议的任何部分被法院裁定为无效, 非法或不适用, \n"
"该部分将被排除在本协议之外。 您仍然需要遵守本协议的其它可使用的部分。\n"
"本协议的内容和条件受法兰西法律管辖。\n"
"有关本协议的任何争议最好在法庭外解决。作为最后的手段, 争议将被提交\n"
"法国巴黎适当的法院审理。\n"
"对本文档有任何疑问, 请联系 MandrakeSoft S.A.\n"
"\n"
"以上中文翻译仅为方便您理解, 不能作为法律用途, 请以协议英文文本为准。\n"
#: ../../standalone/drakboot:1
#, c-format
msgid "Default user"
msgstr "默认用户"
#: ../../standalone/draksplash:1
#, c-format
msgid ""
"the progress bar x coordinate\n"
"of its upper left corner"
msgstr "进度条的左上角的 X 坐标"
#: ../../standalone/drakgw:1
#, c-format
msgid "Current interface configuration"
msgstr "当前接口配置"
#: ../../printer/data.pm:1
#, c-format
msgid "LPD - Line Printer Daemon"
msgstr "LPD - 行式打印向导"
#: ../../network/isdn.pm:1
#, c-format
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
"card.\n"
msgstr ""
"\n"
"如果您的卡是 ISA 卡, 下一屏幕显示的值应该是正确的。\n"
"\n"
"如果您的卡 是 PCMCIA 卡, 您必须知道它的 irq 和 io。\n"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do not print any test page"
msgstr "不打印任何测试页"
#: ../../keyboard.pm:1
#, c-format
msgid "Gurmukhi"
msgstr "旁遮普"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "%s already in use\n"
msgstr "已经使用了 %s\n"
#: ../../any.pm:1
#, c-format
msgid "Force No APIC"
msgstr "强制无 APIC"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr "这个密码太简单了 (至少要有 %d 个字符)"
#: ../../standalone.pm:1
#, c-format
msgid "[keyboard]"
msgstr "[键盘]"
#: ../../network/network.pm:1
#, c-format
msgid "FTP proxy"
msgstr "FTP 代理服务器"
#: ../../standalone/drakfont:1
#, c-format
msgid "Install List"
msgstr "安装列表"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Change\n"
"Restore Path"
msgstr ""
"修改\n"
"恢复路径"
#: ../../standalone/logdrake:1
#, c-format
msgid "Show only for the selected day"
msgstr "仅显示被选择的日期"
#: ../../standalone/drakbackup:1
#, c-format
msgid "\tLimit disk usage to %s MB\n"
msgstr "\t限制磁盘使用为 %s Mb\n"
#: ../../Xconfig/card.pm:1
#, c-format
msgid "512 kB"
msgstr "512 kB"
#: ../../standalone/net_monitor:1
#, c-format
msgid "Logs"
msgstr "日志"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "(Note: Parallel ports cannot be auto-detected)"
msgstr "(注意: 并行端口无法自动检测)"
#: ../../standalone/logdrake:1
#, c-format
msgid "<control>N"
msgstr "<control>N"
#: ../../network/isdn.pm:1
#, c-format
msgid "What kind of card do you have?"
msgstr "请问您适配卡的种类?"
#: ../../standalone/logdrake:1
#, c-format
msgid "<control>O"
msgstr "<control>O"
#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
msgid "Security"
msgstr "安全"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""
"您可以用图形接口“xpdq”设置打印选项和处理打印作业。\n"
"如果您使用KDE, 桌面上有“停止打印机!”按钮用于取消打印作业。\n"
#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
msgid "<control>Q"
msgstr "<control>Q"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Please be sure that the cron daemon is included in your services. \n"
"\n"
"Note that currently all 'net' media also use the hard drive."
msgstr ""
"请确认 cron 后台程序包含在 services 文件中。\n"
"\n"
"请注意现在所有的“网络”介质都要利用硬盘。"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Unknown"
msgstr "未知"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "This server is already in the list, it cannot be added again.\n"
msgstr "此服务器已经位于列表中, 无法再次添加。\n"
#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
msgid "Network Configuration"
msgstr "网络配置"
#: ../../standalone/logdrake:1
#, c-format
msgid "<control>S"
msgstr "<control>S"
#: ../../network/isdn.pm:1
#, c-format
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr ""
"其它地区 \n"
" 没有 D-信道(专线)"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Option %s must be a number!"
msgstr "选项 %s 必须是数字!"
#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, c-format
msgid "Notice"
msgstr "注意"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "You have not configured X. Are you sure you really want this?"
msgstr "您还没有配置过 X。您真的想要这样吗?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The configuration of the printer will work fully automatically. If your "
"printer was not correctly detected or if you prefer a customized printer "
"configuration, turn on \"Manual configuration\"."
msgstr ""
"打印机的设置会完全自动工作。如果您的打印机没有被正确检测或者您想定制打印机设"
"置, 选择“手工设置”。"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "What type of partitioning?"
msgstr "何种分区类型?"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"file list sent by FTP: %s\n"
" "
msgstr ""
"通过 FTP 发送的文件列表: %s\n"
" "
#: ../../standalone/drakconnect:1
#, c-format
msgid "Interface"
msgstr "接口"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Multisession CD"
msgstr "多道 CD"
#: ../../modules/parameters.pm:1
#, c-format
msgid "comma separated strings"
msgstr "逗号分栏的词语"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "These are the machines from which the scanners should be used:"
msgstr "下面是要使用扫描仪的计算机:"
#: ../../standalone/logdrake:1
#, c-format
msgid "Messages"
msgstr "信息"
#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr "未知|CPH06X (bt878)[很多厂家]"
#: ../../network/drakfirewall.pm:1
#, c-format
msgid "POP and IMAP Server"
msgstr "POP 和 IMAP 服务器"
#: ../../lang.pm:1
#, c-format
msgid "Mexico"
msgstr "墨西哥"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Model stepping"
msgstr "型号步进"
#: ../../lang.pm:1
#, c-format
msgid "Rwanda"
msgstr "卢旺达"
#: ../../modules/interactive.pm:1
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "您还有其它 %s 接口吗?"
#: ../../lang.pm:1
#, c-format
msgid "Switzerland"
msgstr "瑞士"
#: ../../lang.pm:1
#, c-format
msgid "Brunei Darussalam"
msgstr "文莱达鲁萨兰国"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "You must be root to read configuration file. \n"
msgstr "您必须是 root 才能读取配置文件。\n"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote lpd Printer Options"
msgstr "远程 lpd 打印机选项"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"GNU/Linux is a multi-user system, meaning each user may have their own\n"
"preferences, their own files and so on. You can read the ``Starter Guide''\n"
"to learn more about multi-user systems. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be\n"
"authorized to change anything except their own files and their own\n"
"configurations, protecting the system from unintentional or malicious\n"
"changes that impact on the system as a whole. You will have to create at\n"
"least one regular user for yourself -- this is the account which you should\n"
"use for routine, day-to-day use. Although it is very easy to log in as\n"
"\"root\" to do anything and everything, it may also be very dangerous! A\n"
"very simple mistake could mean that your system will not work any more. If\n"
"you make a serious mistake as a regular user, the worst that will happen is\n"
"that you will lose some information, but not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you typed in this field and copy it to the \"%s\" field, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the username. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that is no reason to neglect\n"
"it by making it blank or too simple: after all, your files could be the\n"
"ones at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends: your father or your sister, for example. Click \"%s\" when\n"
"you have finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you have finished adding users, you will be asked to choose a user\n"
"that can automatically log into the system when the computer boots up. If\n"
"you are interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click \"%s\".\n"
"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
"GNU/Linux 是一个多用户系统, 因此每个用户可以有自己的喜好设置, 自己的文件等\n"
"等。请阅读“新手指南”了解关于多用户系统的更多内容。和 “root” 即系统管理\n"
"员不同, 您将要添加的普通用户除了他们自己的文件和配置, 无权修改任何东西。您\n"
"必须至少给自己创建一个普通用户。日常使用中, 您应该总是用那个帐户登录系统。\n"
"虽然每天以“root”登录也可以, 但是那样非常危险！只要犯一个微小的错误, 您就\n"
"可能令系统再也无法工作。而作为普通用户, 即时您犯了严重的错误, 您最多失去一\n"
"些数据, 而不是整个系统。\n"
"\n"
"首先, 请输入您的真实姓名。当然, 您想输入什么都可以。DrakX 将取您输入的第一\n"
"个单词放到“用户名”栏中。这将是这个用户以后登录系统时使用的名字。当然, 如\n"
"果您愿意的话, 也可以不管默认值, 更改用户名。下一步就是输入密码。从安全的角\n"
"度看来, 非授权(普通)用户密码显然没有“root”的密码拿药重要, 但是也没有理\n"
"由忽略它, 将其设为空或太简单：不管怎样, 您毕竟希望保护自己的文件。\n"
"\n"
"单击“接受用户”之后, 您可以继续添加更多的用户。例如, 给您的每个朋友, 您的\n"
"父母, 兄弟姐妹分别建立一个帐户。全做好之后, 单击“下一步 ->”。\n"
"\n"
"单击“高级”按钮允许您修改用户的默认“shell”程序(默认是 bash)。\n"
"\n"
"当您添加完所有用户之后, 您可以选择在计算机启动后自动以哪个用户登入系统。如\n"
"果您希望使用此选项(不太担心本地安全性), 请选择所需的用户和窗口管理器, 然\n"
"后单击“下一步 ->”。如果您不喜欢此特性, 那么请清除“您是否想要使用此特性”\n"
"框。"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Configure Internet Access..."
msgstr "配置 Internet 访问..."
#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Norway"
msgstr "挪威"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Delete profile"
msgstr "删除配置文件"
#: ../../keyboard.pm:1
#, c-format
msgid "Danish"
msgstr "丹麦"
#: ../../services.pm:1
#, c-format
msgid ""
"Automatically switch on numlock key locker under console\n"
"and XFree at boot."
msgstr "开机时为控制台和 XFree 自动设置数字键盘锁。"
#: ../../network/network.pm:1
#, c-format
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"请输入这台电脑的 IP 配置。\n"
"下列项目要求以句点分隔十进制格式输入的 IP 地址。\n"
" (例如, 1.2.3.4) "
#: ../../help.pm:1
#, c-format
msgid ""
"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
"knows if a selected package is located on another CD-ROM so it will eject\n"
"the current CD and ask you to insert the correct CD as required."
msgstr ""
"Mandrake Linux 安装分为几张光盘。DrakeX 知道选中的软件包在哪张光盘中, 所以\n"
"需要时会弹出当前光盘, 要求您插入另外一张。"
#: ../../standalone/drakperm:1
#, c-format
msgid "When checked, owner and group won't be changed"
msgstr "选中后, 无法更改所有者和组"
#: ../../harddrake/data.pm:1
#, c-format
msgid "Processors"
msgstr "处理器"
#: ../../lang.pm:1
#, c-format
msgid "Bulgaria"
msgstr "保加利亚"
#: ../../lang.pm:1
#, c-format
msgid "Svalbard and Jan Mayen Islands"
msgstr "斯马尔巴特和扬马延岛"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "No NIC selected!"
msgstr "没有选择网卡!"
#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"Problems occured during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection doesn't "
"work, you might want to relaunch the configuration."
msgstr ""
"配置过程中出现错误。\n"
"请从网络监视器或者控制中心测试您的连接。如果您的连接不工作, 您可能想要重新配"
"置。"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "partition %s is now known as %s"
msgstr "分区 %s 现在成为 %s"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup Other files..."
msgstr "备份其它文件..."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SMB server IP"
msgstr "SMB 服务器 IP"
#: ../../lang.pm:1
#, c-format
msgid "Congo (Kinshasa)"
msgstr "刚果(金沙萨)"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "驱动器 %s 的分区表将会写入磁盘中!"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing HPOJ package..."
msgstr "正在安装 HPOJ 包..."
#: ../../any.pm:1
#, c-format
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"LILO (or grub) on your system, or another operating system removes LILO, or "
"LILO doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures. Would you like to create a bootdisk for your system?\n"
"%s"
msgstr ""
"定制的启动盘让您能不依赖常规的启动引导程序而直接启动您的 Linux 系统。\n"
"如果您不想安装 LILO(或 grub), 或者其它操作系统把 LILO 删除了, 或者\n"
"LILO 在您的硬件上不能工作, 那么这就很有用处了。\n"
"启动盘还可以和 Mandrake 修复盘配合使用, 帮助您更轻松的恢复严重故障的系统。\n"
"现在就给您的系统做一张启动盘, 好吗?\n"
"%s"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
" DrakBackup Daemon Report\n"
msgstr ""
"\n"
" DrakBackup Daemon 报告\n"
#: ../../keyboard.pm:1
#, c-format
msgid "Latvian"
msgstr "拉脱维亚"
#: ../../standalone/drakbackup:1
#, c-format
msgid "monthly"
msgstr "每月"
#: ../../standalone/drakfloppy:1
#, c-format
msgid "Module name"
msgstr "模块"
#: ../../network/network.pm:1
#, c-format
msgid "Start at boot"
msgstr "开机时启动"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Use Incremental Backups"
msgstr "使用增量备份"
#: ../../any.pm:1
#, c-format
msgid "First sector of drive (MBR)"
msgstr "硬盘的第一扇区(MBR)"
#: ../../lang.pm:1
#, c-format
msgid "El Salvador"
msgstr "萨尔瓦多"
#: ../../harddrake/data.pm:1
#, c-format
msgid "Joystick"
msgstr "游戏杆"
#: ../../standalone/harddrake2:1
#, c-format
msgid "DVD"
msgstr "DVD"
#: ../../any.pm:1 ../../help.pm:1
#, c-format
msgid "Use Unicode by default"
msgstr "默认使用 Unicode"
#: ../../standalone/harddrake2:1
#, c-format
msgid "the module of the GNU/Linux kernel that handles the device"
msgstr "管理该设备的 GNU/Linux 内核模块"
#: ../../standalone/drakbackup:1
#, c-format
msgid "DVDR device"
msgstr "DVDR 设备"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Trying to rescue partition table"
msgstr "正在尝试恢复分区表"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Option %s must be an integer number!"
msgstr "选项 %s 必须是整数!"
#: ../../security/l10n.pm:1
#, c-format
msgid "Use password to authenticate users"
msgstr "使用密码验证用户"
#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""
"您需要填写这些项目:\n"
"%s"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"For backups to other media, files are still created on the hard drive, then "
"moved to the other media. Enabling this option will remove the hard drive "
"tar files after the backup."
msgstr ""
#: ../../standalone/livedrake:1
#, c-format
msgid "Unable to start live upgrade !!!\n"
msgstr "无法启动在线升级!!!\n"
#: ../../install_steps_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Name: "
msgstr "名称: "
#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "16 million colors (24 bits)"
msgstr "1 千 6 百万色 (24 位)"
#: ../../any.pm:1
#, c-format
msgid "Allow all users"
msgstr "允许所有用户使用"
#: ../../share/advertising/08-store.pl:1
#, c-format
msgid "The official MandrakeSoft Store"
msgstr "MandrakeSoft 专卖店"
#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Resizing"
msgstr "改变大小"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Enter the maximum size\n"
" allowed for Drakbackup (MB)"
msgstr ""
"请输入允许 Drakbackup\n"
" 使用的最大空间(Mb)"
#: ../../network/netconnect.pm:1
#, c-format
msgid "Cable connection"
msgstr "有线电缆连接"
#: ../../standalone/drakperm:1 ../../standalone/logdrake:1
#, c-format
msgid "User"
msgstr "用户"
#: ../../fsedit.pm:1
#, c-format
msgid ""
"I can't read the partition table of device %s, it's too corrupted for me :(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to loose all the partitions?\n"
msgstr ""
"我无法读取设备 %s 的分区表, 这个分区表破坏得太严重了 :(\n"
"我可以尝试清除坏分区(所有的数据将被清除!)然后继续。\n"
"另外一个解决办法是禁止 DrakX 修改分区表。\n"
"(错误是 %s)\n"
"\n"
"您同意清除所有分区吗?\n"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Do new backup before restore (only for incremental backups.)"
msgstr "恢复前做新的备份 (只适用于增量备份。)"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Name"
msgstr "名称"
#: ../../raid.pm:1
#, c-format
msgid "mkraid failed"
msgstr "mkraid 失败"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Button 3 Emulation"
msgstr "模拟三键"
#: ../../security/l10n.pm:1
#, c-format
msgid "Check additions/removals of sgid files"
msgstr "检查 sgid 文件的添加/删除"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Sending files..."
msgstr "正在发送文件..."
#: ../../keyboard.pm:1
#, c-format
msgid "Israeli (Phonetic)"
msgstr "以色列 (音标)"
#: ../../any.pm:1
#, c-format
msgid "access to rpm tools"
msgstr "允许使用 rpm 工具"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "You must choose/enter a printer/device!"
msgstr "您需要配置一台打印机设备"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Permission problem accessing CD."
msgstr "没有适当的权限读写 CD。"
#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Phone number"
msgstr "电话号码"
#: ../../harddrake/sound.pm:1
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr "错误: 您的“%s”声卡驱动程序未被登记"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer name, description, location"
msgstr "打印机名称, 描述, 位置"
#: ../../standalone/drakxtv:1
#, c-format
msgid "USA (broadcast)"
msgstr "美国(广播)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Please choose the\n"
"media for backup."
msgstr ""
"请选择\n"
"备份使用的介质."
#: ../../Xconfig/card.pm:1
#, c-format
msgid "Use Xinerama extension"
msgstr "使用 Xinerama 扩展"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Loopback"
msgstr "回环"
#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
"Unable to properly close mkbootdisk: \n"
" %s \n"
" %s"
msgstr ""
"无法正确关闭 mkbootdisk: \n"
"%s \n"
"%s"
#: ../../standalone/drakxtv:1
#, c-format
msgid "West Europe"
msgstr "西欧"
#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPTIONS:\n"
" --help - print this help message.\n"
" --report - program should be one of mandrake tools\n"
" --incident - program should be one of mandrake tools"
msgstr ""
"[选项] [程序名]\n"
"\n"
"选项:\n"
" --help - 打印此帮助信息。\n"
" --report - 程序应该是 Mandrake 工具之一\n"
" --incident - 程序应该是 Mandrake 工具之一"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Harddrake2 version %s"
msgstr "Harddrake2 版本 %s"
#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
msgid "Preferences"
msgstr "首选项: "
#: ../../lang.pm:1
#, c-format
msgid "Swaziland"
msgstr "斯威士兰"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Copying %s"
msgstr "正在复制 %s"
#: ../../standalone/draksplash:1
#, c-format
msgid "Choose color"
msgstr "选择颜色"
#: ../../lang.pm:1
#, c-format
msgid "Dominican Republic"
msgstr "多米尼加共和国"
#: ../../keyboard.pm:1
#, c-format
msgid "Syriac"
msgstr "叙利亚"
#: ../../standalone/drakperm:1
#, c-format
msgid "Set-UID"
msgstr "Set-UID"
#: ../../help.pm:1
#, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandrake Linux partition. Be careful, all data present on this partition\n"
"will be lost and will not be recoverable!"
msgstr ""
"请选择您为了安装新的 Mandrake Linux 分区想要删除的硬盘。\n"
"注意, 该硬盘上的所有数据将丢失并且无法恢复!"
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "Use the %c and %c keys for selecting which entry is highlighted."
msgstr "Use the %c and %c keys for selecting which entry is highlighted."
#: ../../standalone/drakperm:1
#, c-format
msgid "Enable \"%s\" to execute the file"
msgstr "允许“%s”执行此文件"
#: ../../mouse.pm:1
#, c-format
msgid "Generic 2 Button Mouse"
msgstr "普通两键鼠标"
#: ../../lvm.pm:1
#, c-format
msgid "Remove the logical volumes first\n"
msgstr "先拆卸逻辑卷\n"
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "The highlighted entry will be booted automatically in %d seconds."
msgstr "The highlighted entry will be booted automatically in %d seconds."
#: ../../standalone/drakboot:1
#, c-format
msgid ""
"Can't write /etc/sysconfig/bootsplash\n"
"File not found."
msgstr ""
"无法写入 /etc/sysconfig/bootsplash\n"
"没有找到文件。"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Internet access"
msgstr "Internet 访问"
#: ../../standalone/draksplash:1
#, c-format
msgid ""
"y coordinate of text box\n"
"in number of characters"
msgstr "文本框的 Y 坐标, 按字符数计算"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button."
msgstr "要获得当前打印机的可用选项列表, 请单击“打印选项列表”按钮。"
#: ../../standalone/drakgw:1
#, c-format
msgid "Enabling servers..."
msgstr "正在启用服务器..."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing test page(s)..."
msgstr "正在打印测试页..."
#: ../../fsedit.pm:1
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "已经有一个分区的装载点是 %s\n"
#: ../../security/help.pm:1
#, c-format
msgid "Enable/Disable msec hourly security check."
msgstr "启用/禁用 msec 每小时安全检查。"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"At this point, you need to decide where you want to install the Mandrake\n"
"Linux operating system on your hard drive. If your hard drive is empty or\n"
"if an existing operating system is using all the available space you will\n"
"have to partition the drive. Basically, partitioning a hard drive consists\n"
"of logically dividing it to create the space needed to install your new\n"
"Mandrake Linux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to lost data if there is an existing operating system already\n"
"installed on the drive, partitioning can be intimidating and stressful if\n"
"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
" * \"%s\": this option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
"partition. Resizing can be performed without the loss of any data, provided\n"
"you have previously defragmented the Windows partition and that it uses the\n"
"FAT format. Backing up your data is strongly recommended.. Using this\n"
"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
" * \"%s\": if you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandrake Linux system,\n"
"choose this option. Be careful, because you will not be able to undo your\n"
"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\": choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
"Guide''."
msgstr ""
"这里, 您需要在硬盘上选择用来安装 Mandrake Linux 操作系统的位置。如果您的硬\n"
"盘是空的, 或者现有的操作系统使用了磁盘上的全部空间, 您就需要进行分区。基本\n"
"上, 进行硬盘分区就是把它在逻辑上分成多个部分, 以便创建安装 Mandrake Linux\n"
"所需的空间。\n"
"\n"
"由于分区过程的后果经常是不可逆转, 并且如果该驱动器上已经存有操作系统的话, \n"
"可能会丢失数据, 所以对于缺乏经验的用户来说, 分区是十分危险的。所幸的是, \n"
"DrakX 提供了一个向导, 可简化这一过程。在继续这一步之前, 请认真阅读下面的说\n"
"明, 多花一点时间弄明白。\n"
"\n"
"根据您的硬盘驱动器配置不同, 我们为您提供了以下选项：\n"
"\n"
" *“使用剩余空间”：此选项将为您的空驱动器执行自动分区。如果您使用此选项, \n"
"将不会有任何进一步的提示。\n"
"\n"
" *“使用已有分区”：向导会检测硬盘上一个或多个已有的 Linux 分区。如果您想\n"
"要使用这些分区的话, 请选择这一选项。接下来, 安装程序将会询问您要将每个分区\n"
"关联到哪个载入点。安装程序会替您选择最合理的载入点, 所以在大多数情况下, 无\n"
"需进行更改。\n"
"\n"
" *“使用 Windows 分区的剩余空间”：如果在您的硬盘上安装了 Microsoft Windows\n"
"并且它已经占用了所有可用的空间, 您就需要为 Linux 数据创建剩余空间。要继续\n"
"进行, 您可以删除您的 Microsoft Windows 分区和数据(参看“删除整个磁盘”方\n"
"案), 或者更改您的 Microsoft Windows FAT 分区的大小。更改分区大小不会丢失\n"
"数据, 但前提是您已经将 Windows 分区的碎片充分整理, 而且必须是 FAT 系统。不\n"
"管如何, 我们仍然建议您对数据进行备份。如果您想要在一台计算机上同时使用\n"
"Mandrake Linux 和 Microsoft Windows, 则推荐使用此选项。\n"
"\n"
" 在选择此选项之前, 您必须了解您的 Microsoft Windows 分区将会比原先小。\n"
"您在 Microsoft Windows 下存储数据或安装新软件的剩余空间也会更小。\n"
"\n"
" *“删除整个磁盘”：如果您希望清除磁盘上所有的分区和数据, 而换用全新的\n"
"Mandrake Linux 系统, 就请采用这个选项。请额外小心, 因为您在确认之后将无法\n"
"撤消您的选择。\n"
"\n"
" !!如果您选择此选项, 您磁盘上的所有数据都将会被删除。!!\n"
"\n"
" *“删除 Windows”：这一选项将会删除驱动器上的所有内容, 并且从头开始进行分\n"
"区。您磁盘上的所有数据都将丢失。\n"
"\n"
" !!如果您选择此选项, 您磁盘上的所有数据都将会被删除。!!\n"
"\n"
" *“自定义磁盘分区”：如果您想要手动对硬盘进行分区的话, 请选择此选项。请额\n"
"外小心, 这一选项功能非常强大, 但非常危险, 您可能非常轻易的就丢失了您所有的\n"
"数据。这就是为什么我们仅对有丰富经验的用户才推荐这一选项的原因。关于如何使\n"
"用 DiskDrake 工具的更多指南, 请参看“新手指南”中的“管理您的分区”一节。"
#: ../../lang.pm:1
#, c-format
msgid "Ukraine"
msgstr "乌克兰"
#: ../../standalone/drakbug:1
#, c-format
msgid "Application:"
msgstr "应用程序:"
#: ../../network/isdn.pm:1
#, c-format
msgid "External ISDN modem"
msgstr "外置 ISDN 调制解调器"
#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, report check result by mail."
msgstr "如果设为 yes, 就会通过邮件报告检测结果。"
#: ../../interactive/stdio.pm:1
#, c-format
msgid "Your choice? (default %s) "
msgstr "您的选择? (默认 %s) "
#: ../../harddrake/sound.pm:1
#, c-format
msgid "Trouble shooting"
msgstr "疑难解答"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""
"测试页已经发送到打印机后台程序。过一小段时间打印机将开始工作。\n"
"打印状态:\n"
"%s\n"
"\n"
#: ../../standalone/drakbackup:1
#, c-format
msgid "daily"
msgstr "每日"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "and one unknown printer"
msgstr "和一台未知的打印机"
#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "Ireland"
msgstr "爱尔兰"
#: ../../standalone/drakbackup:1
#, c-format
msgid " Restore Configuration "
msgstr " 恢复配置 "
#: ../../Xconfig/test.pm:1
#, c-format
msgid "Is this the correct setting?"
msgstr "这样正确吗?"
#: ../../help.pm:1
#, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
"connect your computer to the Internet or to a local network, click \"%s\".\n"
"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
"configure the network, or to do it later, in which case clicking the \"%s\"\n"
"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
"simple LAN connection (Ethernet).\n"
"\n"
"We will not detail each configuration option - just make sure that you have\n"
"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
"from your Internet Service Provider or system administrator.\n"
"\n"
"You can consult the ``Starter Guide'' chapter about Internet connections\n"
"for details about the configuration, or simply wait until your system is\n"
"installed and use the program described there to configure your connection."
msgstr ""
"现在您可以设置您的 Internet/网络连接。如果您希望把您的电脑连接到 Internet或"
"者\n"
"局域网, 请单击“%s”。Mandrake Linux 将会尝试自动检测网络设备和调制解调器。\n"
"如果检测失败, 请清除“%s”复选框再试一次。\n"
"您也可以不配置网络, 或者以后再进行这一步骤, 此时请按“%s”按钮跳过这一步。\n"
"\n"
"在进行网络配置的过程中, 目前支持的连接方式有：传统调制解调器, ISDN 调制解\n"
"调器, ADSL 连接, 有线电视调制解调器, 最后是简单 LAN 连接(以太网)。\n"
"\n"
"我们不在这里详细讨论每种连接方式。只要保证您从您的互联网服务商或者系统管理\n"
"员那里得到了所有必要的参数即可, 其中可能包括 IP 地址, 默认网关, DNS 服务器\n"
"等参数。\n"
"\n"
"您可以参考“用户手册”有关 Internet 连接的章节, 以便获得关于配置的细节, 或者"
"等\n"
"到您的系统安装结束之后使用手册中提到的程序进行配置。"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Wizard Configuration"
msgstr "向导配置"
#: ../../modules/interactive.pm:1
#, c-format
msgid "Autoprobe"
msgstr "自动探测"
#: ../../security/help.pm:1
#, c-format
msgid ""
"if set to yes, check for :\n"
"\n"
"- empty passwords,\n"
"\n"
"- no password in /etc/shadow\n"
"\n"
"- for users with the 0 id other than root."
msgstr ""
"如果设为 yes, 就会检查:\n"
"\n"
"- 空密码,\n"
"\n"
"- /etc/shadow 中没有密码\n"
"\n"
"- 并非 root 但 id 为 0 的用户。"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup system files..."
msgstr "备份系统文件..."
#: ../../any.pm:1
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "没有 NIS 域无法广播"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Removing printer \"%s\"..."
msgstr "正在删除打印机“%s”..."
#: ../../security/l10n.pm:1
#, c-format
msgid "Shell history size"
msgstr "Shell 历史大小"
#: ../../standalone/drakfloppy:1
#, c-format
msgid "drakfloppy"
msgstr "drakfloppy"
#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"Please indicate where the auto_install.cfg file is located.\n"
"\n"
"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
msgstr ""
"请指定 auto_install.cfg 位于什么地方。\n"
"\n"
"如果您不想设置自动安装模式就保留空白。\n"
"\n"
#: ../../standalone/harddrake2:1
#, c-format
msgid "information level that can be obtained through the cpuid instruction"
msgstr "通过 CPUID 指令可获取的信息级别"
#: ../../lang.pm:1
#, c-format
msgid "Peru"
msgstr "秘鲁"
#: ../../standalone/drakbackup:1
#, c-format
msgid " on device: %s"
msgstr " 使用设备: %s"
#: ../../install_interactive.pm:1
#, c-format
msgid "Remove Windows(TM)"
msgstr "删除 Windows(TM)"
#: ../../services.pm:1
#, c-format
msgid "Starts the X Font Server (this is mandatory for XFree to run)."
msgstr "启动 X 字体服务(X窗口系统必须)。"
#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"Most of these values were extracted\n"
"from your running system.\n"
"You can modify as needed."
msgstr ""
"这些值中绝大多数会从您正在运行的系统\n"
"中提取。若需要您可以进行修改。"
#: ../../standalone/drakfont:1
#, c-format
msgid "Select the font file or directory and click on 'Add'"
msgstr "选择字体文件或目录, 然后单击“添加”"
#: ../../lang.pm:1
#, c-format
msgid "Madagascar"
msgstr "马达加斯加"
#: ../../standalone/drakbug:1
#, c-format
msgid "Urpmi"
msgstr "Urpmi"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Cron not available yet as non-root"
msgstr "非 root 用户还不能使用 cron"
#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#: ../../standalone/drakbackup:1
#, c-format
msgid "System"
msgstr "系统"
#: ../../any.pm:1 ../../help.pm:1
#, c-format
msgid "Do you want to use this feature?"
msgstr "您要使用此特性吗?"
#: ../../keyboard.pm:1
#, c-format
msgid "Arabic"
msgstr "阿拉伯"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Options:\n"
msgstr ""
"\n"
"- 选项:\n"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Password required"
msgstr "需要密码"
#: ../../common.pm:1
#, c-format
msgid "%d minutes"
msgstr "%d 分"
#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Graphics card: %s"
msgstr "显示卡: %s"
#: ../../standalone/drakbackup:1
#, c-format
msgid "WebDAV transfer failed!"
msgstr "WebDAV 传输失败!"
#: ../../Xconfig/card.pm:1
#, c-format
msgid "XFree configuration"
msgstr "XFree 配置"
#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Choose action"
msgstr "选择操作"
#: ../../lang.pm:1
#, c-format
msgid "French Polynesia"
msgstr "法属玻利尼西亚"
#: ../../help.pm:1
#, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"If you choose a mouse other than the default, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and to\n"
"go back to the list of choices.\n"
"\n"
"Wheel mice are occasionally not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
"buttons and check that the mouse pointer moves on-screen as you move your\n"
"mouse."
msgstr ""
"通常情况下, DrakX 能够正确检测您所使用鼠标的按键数目。如果检测失败, 它\n"
"会假设您有两键鼠标, 并设置模拟第三键。激活第三键的方法是同时按下左右鼠标按\n"
"钮。DrakX 会自动分辨 PS/2、串口或 USB 鼠标。\n"
"\n"
"如果您想要指定不同类型的鼠标, 请从列表中选择您使用的鼠标。\n"
"\n"
"如果您选择的不是默认设置, 会出现测试窗口。您可以按各个按键和滚轮, 以便确认\n"
"设置正确。如果鼠标工作不正常, 按空格或回车键可以取消测试并返回到选项清单。\n"
"\n"
"可能有些时候滚轮鼠标无法自动检测, 这时您可能需要从列表中选择鼠标。请确定您\n"
"所选的接口类型正确。选择一种鼠标后, 请单击“%s”按钮, 屏幕上将会出现\n"
"鼠标的图像。试着滚动鼠标滚轮, 这样可以确认选择是否正确。只要您看到了屏幕上\n"
"的滚轮和您的滚动方向一样, 并且按钮工作也正确, 移动鼠标则指针也随之移动, 那\n"
"么就算配置完成了。"
#: ../../services.pm:1
#, c-format
msgid "Support the OKI 4w and compatible winprinters."
msgstr "支持 OKI 4w 及其兼容的视窗打印机"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Files or wildcards listed in a .backupignore file at the top of a directory "
"tree will not be backed up."
msgstr ""
#: ../../services.pm:1
#, c-format
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr "启动ALSA语音系统"
#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: ../../modules/interactive.pm:1
#, c-format
msgid "Installing driver for %s card %s"
msgstr "正在安装 %s 卡 %s 的驱动程序"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"), Should it be also "
"the default printer under the new printing system %s?"
msgstr ""
"您已经迁移以前系统中的默认打印机(“%s”), 是否设置为新打印系统的默认打印机 %s?"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Enable Server"
msgstr "启用服务器"
#: ../../keyboard.pm:1
#, c-format
msgid "Ukrainian"
msgstr "乌克兰"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The network access was not running and could not be started. Please check "
"your configuration and your hardware. Then try to configure your remote "
"printer again."
msgstr ""
"网络访问未运行，也无法启动。请检查您的配置和您的硬件。然后再次配置远程打印。"
#: ../../standalone/drakperm:1
#, c-format
msgid "Enable \"%s\" to write the file"
msgstr "允许“%s”写入文件"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please insert the Boot floppy used in drive %s"
msgstr "请在驱动器 %s 中插入启动盘"
#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Local network(s)"
msgstr "局域网"
#: ../../help.pm:1
#, c-format
msgid "Remove Windows"
msgstr "删除 Windows"
#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"Your %s has been configured.\n"
"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
"applications menu."
msgstr ""
"您的 %s 已经配置好。\n"
"现在您可以从应用程序菜单的“多媒体/图象”中使用“XSane”来扫描文档。"
#: ../../harddrake/data.pm:1
#, c-format
msgid "Firewire controllers"
msgstr "火线控制器"
#: ../../help.pm:1
#, c-format
msgid ""
"After you have configured the general bootloader parameters, the list of\n"
"boot options that will be available at boot time will be displayed.\n"
"\n"
"If there are other operating systems installed on your machine they will\n"
"automatically be added to the boot menu. You can fine-tune the existing\n"
"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
"changes.\n"
"\n"
"You may also not want to give access to these other operating systems to\n"
"anyone who goes to the console and reboots the machine. You can delete the\n"
"corresponding entries for the operating systems to remove them from the\n"
"bootloader menu, but you will need a boot disk in order to boot those other\n"
"operating systems!"
msgstr ""
"在您配置了常规的启动引导程序参数之后, 这里所列出的启动选项将会在启动的时候\n"
"显示出来。\n"
"\n"
"如果在您的计算机上安装了其它的操作系统, DrakX 会自动将其添加到启动菜单中。\n"
"如果您想要调整已有的选项, 可以单击“%s”创建新项；选中一项, 然后单击“%s\n"
"”或“%s”可执行相应操作。“%s”代表您同意所作的修改。\n"
"\n"
"您可能不想让可访问控制台并重新启动计算机的任何人访问其它操作系统。您可以在\n"
"此删除操作系统的对应选项, 就可以在启动引导程序菜单中删除该项。但是, 您必须\n"
"有启动盘才能在需要的时候启动其它操作系统。"
#: ../../standalone/drakboot:1
#, c-format
msgid "System mode"
msgstr "系统模式"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print on a NetWare printer, you need to provide the NetWare print server "
"name (Note! it may be different from its TCP/IP hostname!) as well as the "
"print queue name for the printer you wish to access and any applicable user "
"name and password."
msgstr ""
"如果您要使用的是 NetWare 打印机, 您需要说明主机的 NetWare 名字 (注意! \n"
"可能与它的 TCP/IP 主机名不同), 以及有权访问打印机的用户名和密码, \n"
"当然还有打印机的打印队列名。"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Netmask:"
msgstr "子网掩码:"
#: ../../any.pm:1
#, c-format
msgid "Append"
msgstr "追加"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr "更新列表 (显示远程 CUPS 打印服务器)"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"When this option is turned on, on every startup of CUPS it is automatically "
"made sure that\n"
"\n"
"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
"- when printer information is broadcasted, it does not contain \"localhost\" "
"as the server name.\n"
"\n"
"If some of these measures lead to problems for you, turn this option off, "
"but then you have to take care of these points."
msgstr ""
"如果打开此选项, 每次 CUPS 启动时都会自动保证:\n"
"\n"
"- 如果 LPD/LPRng 已经安装, 则 CUPS 不会覆盖 /etc/printcap\n"
"\n"
"- 如果没有 /etc/cups/cupsd.conf, 则会创建一个新的\n"
"\n"
"- 如果打印机信息是广播的, 就不会以“localhost”作为服务器名。\n"
"\n"
"如果这些措施中有什么对您造成问题, 请将此选项关闭, 但是那样您必须自己想办法处"
"理上述几点。"
#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independant "
"sound API (it's available on most unices systems) but it's a very basic and "
"limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""
"OSS (开放源代码声音)是第一个声音 API。这是一个与操作系统无关的声音 API(在绝大"
"多数 UNIX 系统可用), 但是它非常基础且 API 也受到很大限制。\n"
"更重要的是, OSS 驱动程序需要彻底的重新开发。\n"
"\n"
"ALSA (高级 Linux 声音架构)是一个模块化架构, 它支持大量的 ISA 和 PCI 声卡。\n"
"\n"
"它提供的 API 比 OSS 高级得多。\n"
"\n"
"要使用 alsa, 您可以获得:\n"
"- 与旧的 OSS 兼容的 API\n"
"- 新的 ALSA API 带来许多增强特性, 但这需要使用 ALSA 库。\n"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
"如果需要的话, 自动安装可以完全自动执行。\n"
"但此时, 安装程序将会接管硬盘!!\n"
"(只对在另外的计算机上安装而言)。\n"
"\n"
"您可能愿意重现安装。\n"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Network printer \"%s\", port %s"
msgstr "网络打印机“%s”, 端口 %s"
#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr "请选择将使用哪张网卡连接您的局域网。"
#: ../../standalone/drakbackup:1
#, c-format
msgid "OK to restore the other files."
msgstr "即将恢复其它文件。"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please choose your keyboard layout."
msgstr "请选择您使用的键盘布局。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer Device URI"
msgstr "打印机设备 URI"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Not erasable media!"
msgstr "介质不能清除!"
#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Terminal-based"
msgstr "终端方式登录"
#: ../../security/help.pm:1
#, c-format
msgid "Enable/Disable IP spoofing protection."
msgstr "启用/禁用 IP 欺骗保护。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr "在 %s 安全级别上安装打印系统"
#: ../../any.pm:1
#, c-format
msgid "The user name is too long"
msgstr "该用户名太长"
#: ../../any.pm:1
#, c-format
msgid "Other OS (windows...)"
msgstr "其它操作系统(windows...)"
#: ../../standalone/drakbackup:1
#, c-format
msgid "WebDAV remote site already in sync!"
msgstr "WebDAV 远程站点已经同步!"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Reading printer database..."
msgstr "正在读取打印机数据库..."
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Generate auto install floppy"
msgstr "创建自动安装软盘"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\t\t user name: %s\n"
"\t\t on path: %s \n"
msgstr ""
"\t\t 用户名: %s\n"
"\t\t 路径: %s \n"
#: ../../lang.pm:1
#, c-format
msgid "Somalia"
msgstr "索马里"
#: ../../harddrake/sound.pm:1
#, c-format
msgid "No open source driver"
msgstr "没有开放源代码的驱动程序"
#: ../../security/level.pm:1
#, c-format
msgid ""
"This is similar to the previous level, but the system is entirely closed and "
"security features are at their maximum."
msgstr ""
"类似于前一安全级别, 不过系统处于完全封闭状态。\n"
"所有安全特性达到最大限度。"
#: ../../lang.pm:1
#, c-format
msgid "Nicaragua"
msgstr "尼加拉瓜"
#: ../../lang.pm:1
#, c-format
msgid "New Caledonia"
msgstr "新喀里多尼亚"
#: ../../network/isdn.pm:1
#, c-format
msgid "European protocol (EDSS1)"
msgstr "欧洲协议(EDSS1)"
#: ../../any.pm:1
#, c-format
msgid "Video mode"
msgstr "显示模式"
#: ../../lang.pm:1
#, c-format
msgid "Oman"
msgstr "阿曼"
#: ../../standalone/logdrake:1
#, c-format
msgid "Please enter your email address below "
msgstr "请在下面输入您的邮件地址 "
#: ../../standalone/net_monitor:1
#, c-format
msgid "Network Monitoring"
msgstr "网络监视"
#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "SunOS"
msgstr "SunOS"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "New size in MB: "
msgstr "新大小 (MB): "
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Partition table type: %s\n"
msgstr "分区表类型: %s\n"
#: ../../any.pm:1
#, c-format
msgid "Authentication Windows Domain"
msgstr "Windows 域认证"
#: ../../keyboard.pm:1
#, c-format
msgid "US keyboard"
msgstr "美国键盘"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Buttons emulation"
msgstr "鼠标键模拟"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ", network printer \"%s\", port %s"
msgstr ", 网络打印机 “%s”, 端口 %s"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Drakbackup activities via tape:\n"
"\n"
msgstr ""
"\n"
"Drakbackup 的磁带操作:\n"
"\n"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
" FTP connection problem: It was not possible to send your backup files by "
"FTP.\n"
msgstr ""
"\n"
"FTP 连接错误: 无法通过 FTP 传送您的备份文件。\n"
#: ../../standalone/net_monitor:1
#, c-format
msgid "Sending Speed:"
msgstr "发送速度:"
#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
"经典 bug 声音测试程序将要运行下列命令：\n"
"\n"
"\n"
"-“lspcidrake -v | fgrep AUDIO”将会告诉您您的声卡默认使用哪种驱动程序\n"
"\n"
"-“grep snd-slot /etc/modules.conf”将会告诉您声卡目前使用的驱动程序\n"
"\n"
"-“/sbin/lsmod”允许您检查该驱动程序是否已经装入\n"
"\n"
"-“/sbin/chkconfig --list sound”和“/sbin/chkconfig --list alsa”将会\n"
"告诉您声音和 alsa 服务是否已配置为可以 initlevel 3 运行\n"
"\n"
"- “aumix -q”将告诉您音量是否为静音\n"
"\n"
"- “/sbin/fuser -v /dev/dsp”将会告诉您哪个程序使用声卡。\n"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Halt bug"
msgstr "死锁错误"
#: ../../standalone/logdrake:1
#, c-format
msgid "Mail alert configuration"
msgstr "邮件警告设定"
#: ../../lang.pm:1
#, c-format
msgid "Tokelau"
msgstr "托克劳群岛"
#: ../../standalone/logdrake:1
#, c-format
msgid "Matching"
msgstr "匹配"
#: ../../keyboard.pm:1
#, c-format
msgid "Bosnian"
msgstr "波斯尼亚"
#: ../../standalone/drakbug:1
#, c-format
msgid "Release: "
msgstr "版本: "
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Connection speed"
msgstr "连接速率"
#: ../../lang.pm:1
#, c-format
msgid "Namibia"
msgstr "纳米比亚"
#: ../../services.pm:1
#, c-format
msgid "Database Server"
msgstr "数据库服务器"
#: ../../standalone/harddrake2:1
#, c-format
msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr "驱动器的特殊能力(烧录能力和/或 DVD 支持)"
#: ../../raid.pm:1
#, c-format
msgid "Can't add a partition to _formatted_ RAID md%d"
msgstr "无法加入一个分区到已经格式化的硬盘阵列 md%d"
#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"只有使用 XFree %s, 您的显示卡才可以得到 3D 硬件加速支持。\n"
"注意这是试验阶段的支持, 它可能会使您的电脑失去反应。\n"
"XFree %s 支持您的显示卡, 它能提供更好的 2D 支持。"
#: ../../standalone/draksec:1
#, c-format
msgid "Please wait, setting security options..."
msgstr "请稍候, 正在设置安全选项..."
#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr "未知|CPH05X (bt878)[很多厂家] "
#: ../../standalone/drakboot:1
#, c-format
msgid "Launch the graphical environment when your system starts"
msgstr "系统启动时装入图形环境"
#: ../../standalone/drakbackup:1
#, c-format
msgid "hourly"
msgstr "每小时"
#: ../../keyboard.pm:1
#, c-format
msgid "Right Shift key"
msgstr "右侧 Shift 键"
#: ../../standalone/drakbackup:1
#, c-format
msgid " Successfuly Restored on %s "
msgstr " 成功的恢复到 %s "
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Making printer port available for CUPS..."
msgstr "正在配置打印机端口适用于 CUPS..."
#: ../../lang.pm:1
#, c-format
msgid "Antigua and Barbuda"
msgstr "安提瓜和巴布达"
#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"!!! Indicates the password in the system database is different than\n"
" the one in the Terminal Server database.\n"
"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
"!!! 表明系统数据库中的密码与终端服务器数据库中的密码不同。\n"
"请删除/在终端服务器中重新添加用户后才能登录。"
#: ../../keyboard.pm:1
#, c-format
msgid "Spanish"
msgstr "西班牙"
#: ../../services.pm:1
#, c-format
msgid "Start"
msgstr "启动"
#: ../../security/l10n.pm:1
#, c-format
msgid "Direct root login"
msgstr "直接 root 登录"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configuring applications..."
msgstr "正在配置应用程序 ..."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer, connected directly to the network or to a remote Windows machine.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected. Also your network printer(s) and your Windows "
"machines must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network and/or Windows-hosted printers when you don't need "
"it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"欢迎使用打印机设置向导\n"
"\n"
"本向导将帮助您安装您的打印机, 不论打印机是直接连接在本机上, 还是直接连接在网"
"络, 甚至是接在远程的 Windows 机器上。\n"
"\n"
"请打开本地打印机的电源, 这样系统才能自动检测到。同时, 您的网络打印机和 "
"Windows 计算机也必须连接好并打开电源。\n"
"\n"
"注意自动检测网络上的打印机比检测连接在本机的打印机所花时间要长。所以, 如果您"
"不需要, 请关闭对网络打印机或 Windows 打印机的自动检测。\n"
"\n"
"一切准备就绪后请单击“下一步”。如果您不想现在设置打印机, 请单击“取消”。"
#: ../../network/netconnect.pm:1
#, c-format
msgid "Normal modem connection"
msgstr "调制解调器连接"
#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
msgid "File Selection"
msgstr "选择文件"
#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
msgid "CUPS"
msgstr "CUPS"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Erase tape before backup"
msgstr "备份前清空磁带"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Run config tool"
msgstr "运行配置工具"
#: ../../any.pm:1
#, c-format
msgid "Bootloader installation"
msgstr "引导程序安装"
#: ../../install_interactive.pm:1
#, c-format
msgid "Root partition size in MB: "
msgstr "根分区大小(MB): "
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "This is a mandatory package, it can't be unselected"
msgstr "这个软件包是必需的, 不能取消选定"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Etherboot ISO image is %s"
msgstr "Etherboot ISO 镜像是 %s"
#: ../../services.pm:1
#, c-format
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
"names to IP addresses."
msgstr "named (BIND) 是一个域名服务器 (DNS), 用来把主机名解析成 IP 地址。"
#: ../../lang.pm:1
#, c-format
msgid "Saint Lucia"
msgstr "圣卢西亚"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Disconnect..."
msgstr "断开连接..."
#: ../../standalone/drakbug:1
#, c-format
msgid "Report"
msgstr "报告"
#: ../../lang.pm:1
#, c-format
msgid "Palau"
msgstr "帕劳"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "level"
msgstr "级别"
#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
msgid ""
"All incidents will be followed up by a single qualified MandrakeSoft "
"technical expert."
msgstr "专职的 MandrakeSoft 技术专家会负责处理每个事件。"
#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Package Group Selection"
msgstr "程序组选择"
#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"Allow local hardware\n"
"configuration."
msgstr "允许本地硬件配置。"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Via Network Protocol: %s"
msgstr "恢复使用的网络协议: %s"
#: ../../modules/interactive.pm:1
#, c-format
msgid "You can configure each parameter of the module here."
msgstr "您可以配置模块的各个参数。"
#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "选择屏幕分辨率以及颜色深度"
#: ../../standalone/mousedrake:1
#, c-format
msgid "Emulate third button?"
msgstr "模拟三键吗?"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"You can't create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"您无法创建新分区\n"
"(您超过了允许的主分区数量)。\n"
"请先删除一个主分区, 然后创建一个扩展分区。"
#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Mount"
msgstr "装载"
#: ../../standalone/drakautoinst:1
#, c-format
msgid "Creating auto install floppy"
msgstr "创建自动安装软盘"
#: ../../steps.pm:1
#, c-format
msgid "Install updates"
msgstr "安装更新"
#: ../../standalone/draksplash:1
#, c-format
msgid "text box height"
msgstr "文本框高度"
#: ../../standalone/drakconnect:1
#, c-format
msgid "State"
msgstr "状态"
#: ../../standalone/drakfloppy:1
#, c-format
msgid "Be sure a media is present for the device %s"
msgstr "确定设备 %s 的介质存在"
#: ../../any.pm:1
#, c-format
msgid "Enable multiple profiles"
msgstr "允许多种设置"
#: ../../fs.pm:1
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr "不解释文件系统中的字符或特殊块设备。"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"These options can backup and restore all files in your /etc directory.\n"
msgstr "这些选项将备份和恢复您的 /etc 目录中的全部文件。\n"
#: ../../printer/main.pm:1
#, c-format
msgid "Local printer"
msgstr "本机打印机"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Files Restored..."
msgstr "文件已恢复..."
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Package selection"
msgstr "软件包选择"
#: ../../lang.pm:1
#, c-format
msgid "Mauritania"
msgstr "毛里塔尼亚"
#: ../../standalone/drakgw:1
#, c-format
msgid ""
"I can keep your current configuration and assume you already set up a DHCP "
"server; in that case please verify I correctly read the Network that you use "
"for your local network; I will not reconfigure it and I will not touch your "
"DHCP server configuration.\n"
"\n"
"The default DNS entry is the Caching Nameserver configured on the firewall. "
"You can replace that with your ISP DNS IP, for example.\n"
"\t\t \n"
"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
"for you.\n"
"\n"
msgstr ""
"我现在可以保留您当前的设置并假定您已经设置好了 DHCP 服务器；如果是这样的话, "
"我已经从本地网络上读取到了您正在使用的网络；我不会强行重新配置, 也不会更改您"
"的 DHCP 服务器配置。\n"
"\n"
"默认的 DNS 项是配置在防火墙上的缓冲命名服务器。例如, 您可以将其替换为您的 "
"ISP DNS IP。\n"
"\n"
"否则, 我就会重新配置您的接口并重新为您配置 DHCP 服务器。\n"
"\n"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"No local printer found! To manually install a printer enter a device name/"
"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
"printer: /dev/usb/lp1, ...)."
msgstr ""
"没有发现本地打印机! 要手工设置打印机请在输入行写文件名/设备名(并行端口: /dev/"
"lp0, /dev/lp1, ..., 相当于 LPT1:, LPT2:, ..., 第一个 USB 打印机: /dev/usb/"
"lp0, 第二个 USB 打印机: /dev/usb/lp1, ...)。"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "All primary partitions are used"
msgstr "主分区数目已经满了"
#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"After this is done, we recommend that you restart your X environment to "
"avoid any hostname-related problems."
msgstr "建议重启动 X 环境以避免任何于主机名有关的问题。"
#: ../../services.pm:1
#, c-format
msgid "Automatic detection and configuration of hardware at boot."
msgstr "启动时自动监测和配置硬件。"
#: ../../standalone/drakpxe:1
#, c-format
msgid "Installation Server Configuration"
msgstr "安装服务器配置"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Configuring IDE"
msgstr "配置 IDE"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Network functionality not configured"
msgstr "尚未完成网络配置"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Configure module"
msgstr "配置模块"
#: ../../lang.pm:1
#, c-format
msgid "Cocos (Keeling) Islands"
msgstr "科科斯群岛"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "您必需重新开机使您做的更动生效"
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider phone number"
msgstr "服务商电话号码"
#: ../../printer/main.pm:1
#, c-format
msgid "Host %s"
msgstr "主机 %s"
#: ../../lang.pm:1
#, c-format
msgid "Armenia"
msgstr "亚美尼亚"
#: ../../lang.pm:1
#, c-format
msgid "Fiji"
msgstr "斐济"
#: ../../any.pm:1
#, c-format
msgid "Second floppy drive"
msgstr "第二个软盘驱动器"
#: ../../standalone/harddrake2:1
#, c-format
msgid "About Harddrake"
msgstr "关于 Harddrake"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Drive capacity"
msgstr "驱动器能力"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"请在驱动器中插入一张软盘\n"
"这张软盘上所有的数据都将丢失"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Size: %s"
msgstr "大小: %s"
#: ../../keyboard.pm:1
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr "同时按 Ctrl 和 Shift 键"
#: ../../standalone/harddrake2:1
#, c-format
msgid "secondary"
msgstr "次要"
#: ../../standalone/drakbackup:1
#, c-format
msgid "View Backup Configuration."
msgstr "查看备份配置。"
#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, report check result to syslog."
msgstr "如果设为 yes, 就会将检查结果报告给系统日志。"
#. -PO: keep this short or else the buttons will not fit in the window
#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "No password"
msgstr "无密码"
#: ../../lang.pm:1
#, c-format
msgid "Nigeria"
msgstr "尼日利亚"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "%s: %s requires hostname...\n"
msgstr "%s: %s 需要主机名...\n"
#: ../../install_interactive.pm:1
#, c-format
msgid "There is no existing partition to use"
msgstr "现存的分区无法使用"
#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"The following scanners\n"
"\n"
"%s\n"
"are available on your system.\n"
msgstr ""
"下列扫描仪\n"
"\n"
"%s\n"
"直接连接在您的系统。\n"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print to a TCP or socket printer, you need to provide the host name or IP "
"of the printer and optionally the port number (default is 9100). On HP "
"JetDirect servers the port number is usually 9100, on other servers it can "
"vary. See the manual of your hardware."
msgstr ""
"要打印到一台 TCP 或 socket 打印机, 您需要提供打印机的主机名和可选的端口号码"
"(默认是 9100)。HP JetDirect 打印服务器通常用端口9100, 其它服务器可能用其它的"
"端口。请查阅您的硬件手册。"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Hard drive information"
msgstr "硬盘信息"
#: ../../keyboard.pm:1
#, c-format
msgid "Russian"
msgstr "俄国"
#: ../../lang.pm:1
#, c-format
msgid "Jordan"
msgstr "约旦"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Hide files"
msgstr "隐藏文件"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Auto-detect printers connected to this machine"
msgstr "自动探测这台机器连接的打印机"
#: ../../standalone/drakxtv:1
#, c-format
msgid ""
"XawTV isn't installed!\n"
"\n"
"\n"
"If you do have a TV card but DrakX has neither detected it (no bttv nor "
"saa7134\n"
"module in \"/etc/modules\") nor installed xawtv, please send the\n"
"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
"with subject \"undetected TV card\".\n"
"\n"
"\n"
"You can install it by typing \"urpmi xawtv\" as root, in a console."
msgstr ""
"XawTV 没有安装!\n"
"\n"
"\n"
"如果您有电视卡但是 DrakX 即没有检测到它 ( bttv 或 saa7134 \n"
"模块都不在“/etc/modules”中) 也没有安装 xawtv, 请运行\n"
"“lspcidrake -v -f”并把结果发送给 “install\\@mandrakesoft.com”\n"
"标题写“undetected TV card”, \n"
"\n"
"\n"
"您可以作为 root 从控制台运行“urpmi xawtv”来安装它。"
#: ../../any.pm:1
#, c-format
msgid "Sorry, no floppy drive available"
msgstr "抱歉, 没有可用的软盘驱动器"
#: ../../lang.pm:1
#, c-format
msgid "Bolivia"
msgstr "玻利维亚"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Set up your Windows server to make the printer available under the IPP "
"protocol and set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""
"在您的 Windows 服务器上设置打印机支持 IPP 协议。然后在这个电脑上用打印机配置"
"向导按照“%s”连接方式配置打印机。\n"
"\n"
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Bad package"
msgstr "有错的软件包"
#: ../../share/advertising/07-server.pl:1
#, c-format
msgid ""
"Transform your computer into a powerful Linux server: Web server, mail, "
"firewall, router, file and print server (etc.) are just a few clicks away!"
msgstr ""
"鼠标点几点, 您的机器就能变成一台强大的 Linux 服务器: Web 服务器, 邮件, 防火"
"墙, 路由器, 文件和打印服务器..."
#: ../../security/level.pm:1
#, c-format
msgid "DrakSec Basic Options"
msgstr "DrakSec 基本选项"
#: ../../standalone/draksound:1
#, c-format
msgid ""
"\n"
"\n"
"\n"
"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
"program. Just type \"sndconfig\" in a console."
msgstr ""
"\n"
"\n"
"\n"
"注意: 如果您的声卡是 ISA 即插即用的, 您需要使用 sndconfig 程序。只需在控制台"
"中输入“sndconfig”。"
#: ../../lang.pm:1
#, c-format
msgid "Romania"
msgstr "罗马尼亚"
#: ../../standalone/drakperm:1
#, c-format
msgid "Group"
msgstr "组"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "choose device"
msgstr "选择设备"
#: ../../lang.pm:1
#, c-format
msgid "Canada"
msgstr "加拿大"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Remove from LVM"
msgstr "从 LVM 中移出"
#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Timezone"
msgstr "时区"
#: ../../keyboard.pm:1
#, c-format
msgid "German"
msgstr "德国"
#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Next ->"
msgstr "下一步 ->"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Turning on this allows to print plain text files in japanese language. Only "
"use this function if you really want to print text in japanese, if it is "
"activated you cannot print accentuated characters in latin fonts any more "
"and you will not be able to adjust the margins, the character size, etc. "
"This setting only affects printers defined on this machine. If you want to "
"print japanese text on a printer set up on a remote machine, you have to "
"activate this function on that remote machine."
msgstr ""
"打开此选项将允许打印用日语写成的纯文本文件。除非您真的想要打印日文, 否则请不"
"要使用此功能。因为一旦该功能被激活, 您将再也无法打印拉丁字体中的重音字符, 您"
"也不能调整页边距、字符大小, 等等。此设置只影响定义在本地的打印机。如果您想要"
"在远程打印机上打印日文, 您就必须在远程打印机上激活此功能。"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"这个分区很可能是驱动器分区。\n"
"您最好请不要更改它。\n"
#: ../../lang.pm:1
#, c-format
msgid "Guinea-Bissau"
msgstr "几内亚比绍"
#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Horizontal refresh rate"
msgstr "水平刷新率"
#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Edit"
msgstr "退出"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"无法取消设定的装载点, 这个分区正用于回环。\n"
"请先删除回环"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The network configuration done during the installation cannot be started "
"now. Please check whether the network is accessable after booting your "
"system and correct the configuration using the Mandrake Control Center, "
"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
"printer, also using the Mandrake Control Center, section \"Hardware\"/"
"\"Printer\""
msgstr ""
"安装时的网络配置现在无法启动。请在启动系统后检查是否可以访问网络, 并使用 "
"Mandrake 控制中心的“网络和 Internet”/“连接”一节纠正配置，然后再使用 Mandrake "
"控制中心的“硬件”/“打印机”设置打印机"
#: ../../harddrake/data.pm:1
#, c-format
msgid "USB controllers"
msgstr "USB 控制器"
#: ../../Xconfig/various.pm:1
#, c-format
msgid "What norm is your TV using?"
msgstr "您的电视信号是什么制式?"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Type:"
msgstr "类型: "
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Share name"
msgstr "共享名"
#: ../../standalone/drakgw:1
#, c-format
msgid "enable"
msgstr "启用"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr "正在连接 Mandrake Linux 网站以获得镜像网站列表..."
#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"A problem occured while restarting the network: \n"
"\n"
"%s"
msgstr ""
"重新启动网络错误: \n"
"\n"
"%s"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Remove the loopback file?"
msgstr "删除回环(loopback)文件?"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Selected size is larger than available space"
msgstr "您选择的超过可用空间"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "NCP server name missing!"
msgstr "NCP 服务器未找到"
#: ../../any.pm:1
#, c-format
msgid "Please choose your country."
msgstr "请选择您的国家/地区。"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Hard Disk Backup files..."
msgstr "备份硬盘文件..."
#: ../../keyboard.pm:1
#, c-format
msgid "Laotian"
msgstr "老挝"
#: ../../lang.pm:1
#, c-format
msgid "Samoa"
msgstr "萨摩亚"
#: ../../services.pm:1
#, c-format
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr "rstat 协议允许网络上的用户获取网络上任何机器的性能指标。"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Re-generating list of configured scanners ..."
msgstr "正在重新生成已配置的扫描仪清单..."
#: ../../harddrake/data.pm:1
#, c-format
msgid "Scanner"
msgstr "扫描仪"
#: ../../Xconfig/test.pm:1
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "警告: 测试这个图形卡可能会锁定您的电脑"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Bad Ip"
msgstr "无效 IP"
#: ../../any.pm:1
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "用户名只能有小写字母、数字、“-”和“_”"
#: ../../standalone/drakbug:1
#, c-format
msgid "Menudrake"
msgstr "Menudrake"
#: ../../security/level.pm:1
#, c-format
msgid "Welcome To Crackers"
msgstr "欢迎入侵者"
#: ../../modules/interactive.pm:1
#, c-format
msgid "Module options:"
msgstr "模块参数:"
#: ../../share/advertising/11-mnf.pl:1
#, c-format
msgid "Secure your networks with the Multi Network Firewall"
msgstr "用多网络防火墙保卫您的网络"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Go on without configuring the network"
msgstr "跳过网络配置继续"
#: ../../network/isdn.pm:1
#, c-format
msgid "Abort"
msgstr "中止"
#: ../../standalone/drakbackup:1
#, c-format
msgid "No password prompt on %s at port %s"
msgstr "%s 上的端口 %s 没有密码提示"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Usage of remote scanners"
msgstr "远程扫描仪使用情况"
#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-CDROM.\n"
msgstr "\t-光盘。\n"
#: ../../install_interactive.pm:1
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
"installation."
msgstr ""
"您的 Windows 分区有太多碎片, 请重新启动, 进入 Windows, 运行“defrag”然后重新开"
"始安装 Mandrake Linux"
#: ../../keyboard.pm:1
#, c-format
msgid "Dvorak (Norwegian)"
msgstr "Dvorak (挪威)"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Hard Disk Backup Progress..."
msgstr "硬盘文件备份进度..."
#: ../../standalone/drakfloppy:1
#, c-format
msgid "Unable to fork: %s"
msgstr "无法创建进程: %s"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Type: "
msgstr "类型: "
#: ../../standalone/drakTermServ:1
#, c-format
msgid "<-- Edit Client"
msgstr "<-- 编辑客户"
#: ../../standalone/drakfont:1
#, c-format
msgid "no fonts found"
msgstr "找不到字体文件"
#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../harddrake/data.pm:1
#, c-format
msgid "Mouse"
msgstr "鼠标"
#: ../../bootloader.pm:1
#, c-format
msgid "not enough room in /boot"
msgstr "/boot 中没有足够空间"
#: ../../lang.pm:1
#, c-format
msgid "Liechtenstein"
msgstr "列支敦士登"
#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid "Host name"
msgstr "主机名"
#: ../../standalone/draksplash:1
#, c-format
msgid "the color of the progress bar"
msgstr "进度条的颜色"
#: ../../standalone/drakfont:1
#, c-format
msgid "Suppress Fonts Files"
msgstr "删除字体文件"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Add to RAID"
msgstr "加入 RAID"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"You can add additional entries in yaboot for other operating systems,\n"
"alternate kernels, or for an emergency boot image.\n"
"\n"
"For other OSs, the entry consists only of a label and the \"root\"\n"
"partition.\n"
"\n"
"For Linux, there are a few possible options:\n"
"\n"
" * Label: this is the name you will have to type at the yaboot prompt to\n"
"select this boot option.\n"
"\n"
" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
"variation of vmlinux with an extension.\n"
"\n"
" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
"\n"
" * Append: on Apple hardware, the kernel append option is often used to\n"
"assist in initializing video hardware, or to enable keyboard mouse button\n"
"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
"The following are some examples:\n"
"\n"
" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
"hda=autotune\n"
"\n"
" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: this option can be used either to load initial modules before\n"
"the boot device is available, or to load a ramdisk image for an emergency\n"
"boot situation.\n"
"\n"
" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
"need to allocate a large ramdisk, this option can be used to specify a\n"
"ramdisk larger than the default.\n"
"\n"
" * Read-write: normally the \"root\" partition is initially mounted as\n"
"read-only, to allow a file system check before the system becomes ``live''.\n"
"You can override the default with this option.\n"
"\n"
" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
"problematic, you can select this option to boot in ``novideo'' mode, with\n"
"native frame buffer support.\n"
"\n"
" * Default: selects this entry as being the default Linux selection,\n"
"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
"highlighted with a ``*'' if you press [Tab] to see the boot selections."
msgstr ""
"您可以为 Yaboot 添加更多的条目, 如其它的操作系统、备用的内核, 或者一个紧急\n"
"启动镜像。\n"
"\n"
"对其它操作系统, 条目仅有一个标签和有关的“根”分区。\n"
"\n"
"对于 Linux, 有几个可能的选项：\n"
"\n"
" * Label：这只是您为了选择这个开机选项将要在 yaboot 提示行输入的名字。\n"
"\n"
" * Image：这是要启动的内核的名字。通常是 vmlinux 或者 vmlinux 带上不同的扩\n"
"展。\n"
"\n"
" * Root：“根”设备或者您的 Linux 安装的“/”。\n"
"\n"
" * Append：在苹果的硬件中, 内核的 append 选项会经常用到, 以便初始化视频硬\n"
"件, 或者击活键盘的鼠标键模拟, 因为苹果鼠标上只有一个按键。\n"
"例如：\n"
"\n"
" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
"hda=autotune\n"
"\n"
" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd：这个选项或者是用来在启动设备可用之前加载初始模块, 或者在紧急的\n"
"启动状况中用来加载一个 ramdisk 内存文件系统。\n"
"\n"
" * Initrd-size：默认的 ramdisk 大小一般是 4,096 字节。 如果您需要分配一个\n"
"大的 ramdisk, 可以使用这个选项。\n"
"\n"
" * Read-write：通常“root”分区最初是以只读方式加载的, 以便在系统真正开始\n"
"工作之前检查文件系统。您可以设置此选项为其它方式。\n"
"\n"
" * NoVideo：假如苹果的视频设备引起的问题太多, 您可以选择这个选项, 这样可以\n"
"用“novideo”模式启动, 使用内建的帧缓冲支持。\n"
"\n"
" * Default: 把这个条目设置成默认的 Linux 选择, 在 yaboot 提示行按 ENTER 就\n"
"可以进入。如果您按 [Tab] 列出所有启动选项这个条目前面会标记一个“*”。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
msgstr "打印机“%s”成功添加到Star Office/OpenOffice.org/GIMP"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "No floppy drive available!"
msgstr "没有可用的软盘驱动器!"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To know about the options available for the current printer read either the "
"list shown below or click on the \"Print option list\" button.%s%s%s\n"
"\n"
msgstr ""
"要了解当前打印机可用的选项, 请看下面的列表, 或者单击“打印选项列表”按钮。%s%s%"
"s\n"
"\n"
#: ../../lang.pm:1
#, c-format
msgid "Saudi Arabia"
msgstr "沙特阿拉伯"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Continue anyway?"
msgstr "冒险继续执行?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"If your printer is not listed, choose a compatible (see printer manual) or a "
"similar one."
msgstr "如果您的打印机不在列表中, 请选择兼容的(参考打印机手册)或类似的型号。"
#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer"
msgstr "打印机"
#: ../../services.pm:1
#, c-format
msgid "Internet"
msgstr "互联网"
#: ../../standalone/service_harddrake:1
#, c-format
msgid "Some devices were added:\n"
msgstr "添加了一些设备:\n"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "硬盘参数: %s 柱面, %s 磁头, %s 扇区\n"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing on the printer \"%s\""
msgstr "正在“%s”打印机上打印"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr "/etc/hosts.allow 和 /etc/hosts.deny 已经配置 - 无更改"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore From Tape"
msgstr "从磁带恢复"
#: ../../network/netconnect.pm:1
#, c-format
msgid "Choose the profile to configure"
msgstr "选择要配置的配置文件"
#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid ""
"\n"
"\n"
"Enter a Zeroconf host name without any dot if you don't\n"
"want to use the default host name."
msgstr ""
"\n"
"\n"
"输入 Zeroconf 主机名, 不要任何点, 如果你不想使用默认的\n"
"主机名的话。"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup Now from configuration file"
msgstr "现在从配置文件备份"
#: ../../fsedit.pm:1
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "载入点只能包含字母和数字"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Restarting printing system..."
msgstr "重新启动打印机系统 ..."
#: ../../modules/interactive.pm:1
#, c-format
msgid "See hardware info"
msgstr "查看硬件信息"
#: ../../any.pm:1
#, c-format
msgid "First sector of boot partition"
msgstr "开机分区的第一扇区"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer manufacturer, model"
msgstr "打印机厂家, 型号"
#: ../../printer/data.pm:1
#, c-format
msgid "PDQ - Print, Don't Queue"
msgstr "PDQ - 打印, 不排队"
#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTIONS]...\n"
"Mandrake Terminal Server Configurator\n"
"--enable : enable MTS\n"
"--disable : disable MTS\n"
"--start : start MTS\n"
"--stop : stop MTS\n"
"--adduser : add an existing system user to MTS (requires username)\n"
"--deluser : delete an existing system user from MTS (requires "
"username)\n"
"--addclient : add a client machine to MTS (requires MAC address, IP, "
"nbi image name)\n"
"--delclient : delete a client machine from MTS (requires MAC address, "
"IP, nbi image name)"
msgstr ""
"[选项]...\n"
"Mandrake 终端服务器配置\n"
"--enable : 启用 MTS\n"
"--disable : 禁用 MTS\n"
"--start : 启动 MTS\n"
"--stop : 停止 MTS\n"
"--adduser : 将已有系统用户添加到 MTS (需要用户名)\n"
"--deluser : 将已有系统用户从 MTS 中删除(需要用户名)\n"
"--addclient : 将客户机添加到 MTS (需要 MAC 地址, IP, nbi 映像名称)\n"
"--delclient : 将客户机从 MTS 中删除(需要 MAC 地址, IP, nbi 映像名称)"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Subnet Mask:"
msgstr "子网掩码:"
#: ../../standalone/drakboot:1
#, c-format
msgid "LiLo and Bootsplash themes installation successfull"
msgstr "LiLo 和 Bootsplash 主题安装成功"
#: ../../security/l10n.pm:1
#, c-format
msgid "Set password expiration and account inactivation delays"
msgstr "设置密码过期和账户停用延迟"
#: ../../Xconfig/monitor.pm:1
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"两个关键的参数:\n"
"(1) 垂直刷新率, 用于设置屏幕每秒钟更新的次数;\n"
"(2) 水平刷新率, 用于设置显示扫描线的速率。\n"
"\n"
"千万小心! 不要把这些同步范围设定得超过您的显示器的能力。\n"
"不恰当的设置可能会损害您的显示器!\n"
"所以没把握时, 您可以选择保守的设定。"
#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
msgid "Modify"
msgstr "修改"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""
"\n"
"“%s”和“%s”命令允许修改打印作业的选项, 例如:“%s <file>”。\n"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Need hostname, username and password!"
msgstr "需要主机名、用户名和密码!"
#: ../../diskdrake/dav.pm:1
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
"WebDAV 是一种协议, 它允许您将 Web 服务器的目录装载到本地, 并将其看作本\n"
"地的文件系统(假设该 Web 服务器已经配置为 WebDAV 服务器)。如果您想要添加\n"
"WebDAV 载入点, 请选择“新建”。"
#: ../../standalone/drakbug:1
#, c-format
msgid "HardDrake"
msgstr "HardDrake"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "new"
msgstr "新建"
#: ../../security/help.pm:1
#, c-format
msgid "Enable/Disable syslog reports to console 12"
msgstr "在 12 控制台上启用/禁用系统日志报告"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Would you like to try again?"
msgstr "您是否想要再试一次?"
#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Wizard"
msgstr "向导"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Edit selected server"
msgstr "编辑选中的服务器"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Please choose where you want to backup"
msgstr "请选择您希望在哪里做备份"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr "您需要重新启动才能让对分区表的更改生效"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Do not include the browser cache"
msgstr "不包括浏览器缓存"
#: ../../standalone/keyboarddrake:1
#, c-format
msgid "Please, choose your keyboard layout."
msgstr "请选择您使用的键盘布局。"
#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
msgid "Standard"
msgstr "标准"
#: ../../standalone/mousedrake:1
#, c-format
msgid "Please choose your mouse type."
msgstr "请选择您的鼠标类型。"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Connect..."
msgstr "连接..."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Failed to configure printer \"%s\"!"
msgstr "配置打印机“%s”失败"
#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "not configured"
msgstr "未配置"
#: ../../network/isdn.pm:1
#, c-format
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"
#: ../../standalone/drakfont:1
#, c-format
msgid "About"
msgstr "关于"
#: ../../network/network.pm:1
#, c-format
msgid "Proxies configuration"
msgstr "代理服务器配置"
#: ../../mouse.pm:1
#, c-format
msgid "GlidePoint"
msgstr "GlidePoint"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Start: sector %s\n"
msgstr "开始: 第 %s 扇区\n"
#: ../../standalone/drakgw:1
#, c-format
msgid "Network interface already configured"
msgstr "已完成网络配置"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Couldn't access the floppy!"
msgstr "无法访问软盘!"
#: ../../standalone/drakbug:1
#, c-format
msgid "connecting to Bugzilla wizard ..."
msgstr "正在连接 Bugzilla 故障报告向导 ..."
#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Mail Server"
msgstr "邮件服务器"
#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Please click on a partition"
msgstr "请选中一个分区"
#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Linux"
msgstr "Linux"
#: ../../standalone/drakxtv:1
#, c-format
msgid "Have a nice day!"
msgstr "祝您愉快!"
#: ../../standalone/drakbackup:1
#, c-format
msgid "across Network"
msgstr "通过网络"
#: ../../help.pm:1
#, c-format
msgid "/dev/fd0"
msgstr "/dev/fd0"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Upgrade %s"
msgstr "升级 %s"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Select Printer Connection"
msgstr "选择打印机连接"
#: ../../standalone/drakxtv:1
#, c-format
msgid "Scanning for TV channels in progress ..."
msgstr "正在搜索电视频道..."
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Error during sending file via FTP.\n"
" Please correct your FTP configuration."
msgstr ""
"通过 FTP 发送文件出错。\n"
" 请改正您的 FTP 配置。"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "IP Range Start:"
msgstr "IP 范围起点:"
#: ../../services.pm:1
#, c-format
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"超级互联网后台服务器 (常称作 inetd) 在需要时启动各种其它的互联网服务。\n"
"它负责响应多种服务, 包括 telnet, ftp, rsh 和 rlogin。\n"
"禁止 inetd 就同时禁止了它负责的所有服务。"
#: ../../standalone/draksplash:1
#, c-format
msgid "the height of the progress bar"
msgstr "进度条的高度"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Save via %s on host: %s\n"
msgstr ""
"\n"
"- 通过 %s 保存到主机: %s\n"
#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "Argentina"
msgstr "阿根廷"
#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Domain Name Server"
msgstr "域名服务器"
#: ../../standalone/draksec:1
#, c-format
msgid "Security Level:"
msgstr "安全级别:"
#: ../../fsedit.pm:1
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "装载点必需要以 / 为开头"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Choose your CD/DVD device"
msgstr "请选择您使用的 CD/DVD 介质"
#: ../../standalone/logdrake:1
#, c-format
msgid "Postfix Mail Server"
msgstr "Postfix 邮件服务"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Quit without saving"
msgstr "不保存改变就退出"
#: ../../lang.pm:1
#, c-format
msgid "Yemen"
msgstr "也门"
#: ../../share/advertising/11-mnf.pl:1
#, c-format
msgid "This product is available on the MandrakeStore Web site."
msgstr "此产品可以从 MandrakeStore 网站获得。"
#: ../../interactive/stdio.pm:1
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr "=> 您可以从 (%s) 选择很多东西.\n"
#: ../../steps.pm:1
#, c-format
msgid "Hard drive detection"
msgstr "检测硬盘"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"You haven't selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr "您没有选择任何的组件, 请选择最小安装:"
#: ../../diskdrake/dav.pm:1
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "请输入 WebDAV 服务器的 URL"
#: ../../lang.pm:1
#, c-format
msgid "Tajikistan"
msgstr "塔吉克斯坦"
#: ../../help.pm:1 ../../install_steps_gtk.pm:1
#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
msgid "Accept"
msgstr "接受"
#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Description"
msgstr "描述"
#: ../../fsedit.pm:1
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "在打开 %s 写入时发生错误：%s"
#: ../../Xconfig/various.pm:1
#, c-format
msgid "Mouse type: %s\n"
msgstr "鼠标类型: %s\n"
#: ../../Xconfig/card.pm:1
#, c-format
msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr "使用 XFree %s, 您的显示卡可以得到 3D 硬件加速支持。"
#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Choose a monitor"
msgstr "请选择显示器"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Bad Mask"
msgstr "无效的掩码"
#: ../../any.pm:1
#, c-format
msgid "Empty label not allowed"
msgstr "标签不能为空"
#: ../../keyboard.pm:1
#, c-format
msgid "Maltese (UK)"
msgstr "马耳他(英国)"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "I can't add any more partition"
msgstr "我无法再新增任何分区了"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Size in MB: "
msgstr "大小(MB): "
#: ../../printer/main.pm:1
#, c-format
msgid "Remote printer"
msgstr "远程打印机"
#: ../../any.pm:1
#, c-format
msgid "Please choose a language to use."
msgstr "请选择系统默认使用的语言。"
#: ../../network/network.pm:1
#, c-format
msgid ""
"WARNING: this device has been previously configured to connect to the "
"Internet.\n"
"Simply accept to keep this device configured.\n"
"Modifying the fields below will override this configuration."
msgstr ""
"警告: 这个设备已经被配置用于互联网连接。\n"
"要保留现有的配置只要选择 确定。\n"
"修改以下的项目将覆盖原有的设定。"
#: ../../any.pm:1
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr "在这里可以设定开机时自动以某用户的身份登入系统。"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Floppy format"
msgstr "软盘格式化"
#: ../../standalone/drakfont:1
#, c-format
msgid "Generic Printers"
msgstr "基本打印"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please choose the printer to which the print jobs should go or enter a "
"device name/file name in the input line"
msgstr "请选择打印机的任务, 或者输入一个设备名或文件名到输入栏"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "The scanners on this machine are available to other computers"
msgstr "此计算机上的扫描仪可共享给计算机"
#: ../../any.pm:1
#, c-format
msgid "First sector of the root partition"
msgstr "root 分区的第一扇区"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Alternative drivers"
msgstr "替代的驱动程序"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Please check all options that you need.\n"
msgstr ""
"\n"
"请选中您需要的所有选项。\n"
#: ../../any.pm:1
#, c-format
msgid "Initrd"
msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
msgid "Cape Verde"
msgstr "佛得角"
#: ../../standalone/harddrake2:1
#, c-format
msgid "whether this cpu has the Cyrix 6x86 Coma bug"
msgstr "此 CPU 是否有 Cyrix 6x86 Coma 错误"
#: ../../standalone/harddrake2:1
#, c-format
msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr "早期的奔腾芯片在解码 FOOF 字节码时存在错误并可能会死锁"
#: ../../lang.pm:1
#, c-format
msgid "Guam"
msgstr "关岛"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please choose the port that your printer is connected to or enter a device "
"name/file name in the input line"
msgstr "请选择您打印机使用的端口或输入栏内填入一合法设备或文件"
#: ../../standalone/logdrake:1
#, c-format
msgid "/Options/Test"
msgstr "/选项(O)/测试"
#: ../../security/level.pm:1
#, c-format
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive. It must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"这一级别应慎重使用。它使您的系统更易用, 然而也更脆弱:\n"
"假如这台机器将要和其它机器联网或者接入互联网, 绝对不要采用这个级别。\n"
"这个级别连基本的密码检查也没有。"
#: ../../fs.pm:1
#, c-format
msgid "Mounting partition %s"
msgstr "正在加载分区 %s"
#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "User name"
msgstr "用户登录名"
#: ../../standalone/drakbug:1
#, c-format
msgid "Userdrake"
msgstr "Userdrake"
#: ../../install_interactive.pm:1
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "请问您要在哪一个分区里放 Linux4Win?"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup system"
msgstr "备份系统"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Test pages"
msgstr "测试页"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Logical volume name "
msgstr "逻辑卷标"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"List of data to restore:\n"
"\n"
msgstr ""
"要恢复数据的清单:\n"
"\n"
#: ../../fs.pm:1
#, c-format
msgid "Checking %s"
msgstr "正在检查 %s"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "TCP/Socket Printer Options"
msgstr "TCP/Socket 打印机选项"
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card mem (DMA)"
msgstr "网卡内存(DMA)"
#: ../../standalone/net_monitor:1
#, c-format
msgid "Disconnecting from Internet "
msgstr "从 Internet 断开 "
#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "France"
msgstr "法国"
#: ../../standalone/drakperm:1
#, c-format
msgid "browse"
msgstr "浏览"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Checking installed software..."
msgstr "检查已经安装的软件..."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote printer name missing!"
msgstr "没有找到远程打印机!"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do you want to enable printing on printers in the local network?\n"
msgstr "您想使用本地网络的打印机来打印吗?\n"
#: ../../lang.pm:1
#, c-format
msgid "Turkey"
msgstr "土耳其"
#: ../../network/adsl.pm:1
#, c-format
msgid "Alcatel speedtouch usb"
msgstr "阿尔卡特 Speedtouch usb"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Number of buttons"
msgstr "按钮数目"
#: ../../keyboard.pm:1
#, c-format
msgid "Vietnamese \"numeric row\" QWERTY"
msgstr "越南键盘“顺排”QWERTY"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Module"
msgstr "模块"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"In addition, queues not created with this program or \"foomatic-configure\" "
"cannot be transferred."
msgstr ""
"另外, 如果队列不是由这个程序或者“foomatic-configure”所创建, 就无法迁移。"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Hardware"
msgstr "HardDrake"
#: ../../keyboard.pm:1
#, c-format
msgid "Ctrl and Alt keys simultaneously"
msgstr "同时按 Ctrl 和 Alt 键"
#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "United States"
msgstr "美国"
#: ../../security/l10n.pm:1
#, c-format
msgid "User umask"
msgstr "用户 umask"
#: ../../any.pm:1
#, c-format
msgid "Default OS?"
msgstr "默认操作系统?"
#: ../../keyboard.pm:1
#, c-format
msgid "Swiss (German layout)"
msgstr "瑞士 (德语布局)"
#: ../../Xconfig/card.pm:1
#, c-format
msgid "Configure all heads independently"
msgstr "独立配置所有头"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please choose the printer you want to set up. The configuration of the "
"printer will work fully automatically. If your printer was not correctly "
"detected or if you prefer a customized printer configuration, turn on "
"\"Manual configuration\"."
msgstr ""
"请选择您希望设置的打印机。设置打印机将完全自动工作。如果您的打印机没有被正确"
"检测或者您想定制打印机设置, 选择“手工设置”。"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "NTP Server"
msgstr "NTP 服务器"
#: ../../security/l10n.pm:1
#, c-format
msgid "Sulogin(8) in single user level"
msgstr "在单用户级别上 Sulogin(8)"
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Load/Save on floppy"
msgstr "软盘载入/保存"
#: ../../standalone/draksplash:1
#, c-format
msgid "This theme does not yet have a bootsplash in %s !"
msgstr "这个主题的 %s 里面还没有任何开机画面!"
#: ../../pkgs.pm:1
#, c-format
msgid "nice"
msgstr "不错"
#: ../../Xconfig/test.pm:1
#, c-format
msgid "Leaving in %d seconds"
msgstr "即将于 %d 秒后离开"
#: ../../network/modem.pm:1
#, c-format
msgid "Please choose which serial port your modem is connected to."
msgstr "请选择您的调制解调器是连接到哪个串行端口。"
#: ../../standalone/drakperm:1
#, c-format
msgid "Property"
msgstr "所有权"
#: ../../standalone/drakfont:1
#, c-format
msgid "Ghostscript"
msgstr "Ghostscript"
#: ../../standalone/drakconnect:1
#, c-format
msgid "LAN Configuration"
msgstr "LAN 配置"
#: ../../lang.pm:1
#, c-format
msgid "Ghana"
msgstr "加纳"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Path or Module required"
msgstr "要求提供路径或模块"
#: ../../standalone/drakfont:1
#, c-format
msgid "Advanced Options"
msgstr "高级选项"
#: ../../standalone/drakbackup:1
#, c-format
msgid "View Configuration"
msgstr "查看配置"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Coma bug"
msgstr "Coma错误"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandrake Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it doesn't always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": unchecking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"这里, 您需要选择安装 Mandrake Linux 所使用的分区。如果分区已经定义, 不论是\n"
"来自以前安装的 GNU/Linux 系统还是利用其他的分区工具, 您可以使用现有的分区。\n"
"否则, 必须定义硬盘分区。\n"
"\n"
"\n"
"要创建分区, 您必须先选择一个硬盘。单击“hda”可以选中第一个 IDE 驱动器来进\n"
"行分区, “hdb”选中第二个, “sda”用于第一个 SCSI 驱动器, 依此类推。\n"
"\n"
"对选定的硬盘进行分区的选项如下：\n"
" *“全部清除”：删除硬盘上的所有分区\n"
"\n"
" *“自动分配”：自动在硬盘的空闲空间中创建“Ext3”和 swap 分区\n"
"\n"
"“更多”：使用附加的功能：\n"
"\n"
" *“保存分区表”：保存分区表到软盘。万一以后需要恢复分区表就用到它了。强烈\n"
"建议您执行这个步骤。\n"
"\n"
" *“恢复分区表”：恢复以前保存到软盘的分区表\n"
"\n"
" *“抢救分区表”：如果您的分区表损坏了, 可以尝试用这个选项来修复。请小心使\n"
"用并记住它有可能失败。\n"
"\n"
" *“重装分区表”：取消所有修改, 重新装入最初的分区表。\n"
"\n"
" *“自动加载可移动介质”：取消这个选项将强迫用户手动加载和卸载可移动介质, \n"
"如软盘和光盘。\n"
"\n"
" *“向导”：使用向导来帮助您进行硬盘分区。如果您没有深入研究过硬盘分区, 用\n"
"这个方法最好。\n"
"\n"
" *“撤消”：取消您所做的修改。\n"
"\n"
" *“切换正常/专家模式”：专家模式中可以对硬盘分区做更多的操作(类型, 选项, \n"
"格式), 以及提供关于硬盘的更多信息。\n"
"\n"
" *“完成”：对所做的修改满意时, 用这个选项把修改保存到硬盘。\n"
"\n"
"定义分区尺寸的时候, 您可以使用键盘上的方向键来精确调整分区大小。\n"
"\n"
"注意：使用键盘也可以控制这些选项。用 [Tab] 和 [上/下] 箭头在各个分区之间移\n"
"动。\n"
"\n"
"在选中了一个分区以后, 您可以用：\n"
" * Ctrl-c 创建新分区(选中空分区时)。\n"
"\n"
" * Ctrl-d 删除分区。\n"
"\n"
" * Ctrl-m 设置载入点。\n"
"\n"
"要获得关于不同文件系统类型的更多信息, 请阅读“参考手册”中 ext2FS 一章。\n"
"\n"
"如果您在一台 PPC 机器安装时, 您应该创建一个小的 HFS 分区“bootstrap”, 最少"
"1MB, 它将用于安装开机程序 yaboot。如果您想让这个分区更大一些, 比如 50MB, \n"
"您会发现这里很适合存放紧急启动时会用到的备用内核, 以及 ramdisk 镜像。"
#: ../../help.pm:1
#, c-format
msgid ""
"Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If it is not the case, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the case that different servers are available for your card, with or\n"
"without 3D acceleration, you are then asked to choose the server that best\n"
"suits your needs."
msgstr ""
"显示卡\n"
"\n"
" 安装程序通常可以自动检测并配置连接到计算机上的显示卡。如果不幸您的显示\n"
"卡未被检测出来, 您可以在此列表中选择您实际安装的显示卡。\n"
"\n"
" 如果您的显示卡支持不同的服务器, 为了选择是否要启用 3D 加速, 您应该在这\n"
"里选择符合您需要的服务器。"
#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "There was an error installing packages:"
msgstr "安装软件包时出错:"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Lexmark inkjet configuration"
msgstr "利盟(Lexmark)喷墨打印机设定"
#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Undo"
msgstr "撤销"
#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Save partition table"
msgstr "保存分区表"
#: ../../keyboard.pm:1
#, c-format
msgid "Finnish"
msgstr "芬兰"
# ../drakfwia"
#: ../../lang.pm:1
#, c-format
msgid "Macedonia"
msgstr "马其顿"
#: ../../any.pm:1
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
"按用户的共享使用组“fileshare”。\n"
"您可以使用 userdrake 添加一个用户到这个组。"
#: ../../keyboard.pm:1
#, c-format
msgid "Slovenian"
msgstr "斯洛文尼亚"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Authorize:\n"
"\n"
"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
"set to \"ALL\",\n"
"\n"
"- only local ones if set to \"LOCAL\"\n"
"\n"
"- none if set to \"NONE\".\n"
"\n"
"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
"(5))."
msgstr ""
"认证:\n"
"\n"
"- 如果设为“ALL”, 则认证所有被 tcp_wrappers 控制的服务(参看 hosts.deny(5) man "
"page)。\n"
"\n"
"- 如果设为“LOCAL”, 则仅对本地服务。\n"
"\n"
"- 如果设为“NONE”, 则不认证任何服务。\n"
"\n"
"要认证您需要的服务, 请使用 /etc/hosts.allow(参看 hosts.allow(5))。"
#: ../../lang.pm:1
#, c-format
msgid "Libya"
msgstr "利比亚"
#: ../../standalone/drakgw:1
#, c-format
msgid "Configuring scripts, installing software, starting servers..."
msgstr "正在配置脚本, 安装软件, 启动服务程序 ..."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer on parallel port #%s"
msgstr "并行端口打印机 #%s"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Burn to CD"
msgstr ""
"\n"
"- 烧录光盘"
#: ../../any.pm:1
#, c-format
msgid "Table"
msgstr "表格"
#: ../../fs.pm:1
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr "不知道如何格式化 %s 成 %s 类型"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Model"
msgstr "型号"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "USB printer #%s"
msgstr "USB 打印机 #%s"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Stop Server"
msgstr "停止服务器"
#: ../../standalone/drakboot:1
#, c-format
msgid ""
"\n"
"Select the theme for\n"
"lilo and bootsplash,\n"
"you can choose\n"
"them separately"
msgstr ""
"\n"
"选择用于 lilo 和 bootsplash 的主题, \n"
"您可以分别选择"
#: ../../harddrake/data.pm:1
#, c-format
msgid "Modem"
msgstr "调制解调器"
#: ../../lang.pm:1
#, c-format
msgid "Tuvalu"
msgstr "图瓦卢"
#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
msgid "Use auto detection"
msgstr "使用自动检测"
#: ../../services.pm:1
#, c-format
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM 为基于文本的 Linux 应用程序提供对鼠标的支持, 如 MC 命令解释器。\n"
"它同时提供了利用鼠标的控制台复制并粘贴操作, 还支持控制台上的\n"
"弹出式菜单。"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Started on boot"
msgstr "开机时启动"
#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
msgid ""
"Join the MandrakeSoft support teams and the Linux Community online to share "
"your knowledge and help others by becoming a recognized Expert on the online "
"technical support website:"
msgstr ""
"在线加入 MandrakeSoft 支持队伍和 Linux 社团, 分享您的知识, 帮助他人, 成为"
"MandrakeSoft 在线技术支持网站中备受瞩目的专家, 就在："
#: ../../security/l10n.pm:1
#, c-format
msgid "No password aging for"
msgstr "没有密码年龄"
#: ../../standalone/draksec:1
#, c-format
msgid ""
"The following options can be set to customize your\n"
"system security. If you need an explanation, look at the help tooltip.\n"
msgstr ""
"可以设置下列选项以自定义您的系统安全级别。如果您需要解释的话, 请看一下\n"
"帮助。\n"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Automatically find available printers on remote machines"
msgstr "自动查找远程计算机上可用的打印机"
#: ../../lang.pm:1
#, c-format
msgid "East Timor"
msgstr "东帝汶"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Save to Tape on device: %s"
msgstr ""
"\n"
"- 保存到磁带设备: %s"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Login name"
msgstr "登录名"
#: ../../security/l10n.pm:1
#, c-format
msgid "Report unowned files"
msgstr "报告无主无主文件"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Del profile..."
msgstr "删除配置文件..."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing Foomatic..."
msgstr "正在安装 Foomatic 程序..."
#: ../../standalone/XFdrake:1
#, c-format
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "请退出, 然后同时按 Ctrl-Alt-BackSpace"
#: ../../network/netconnect.pm:1
#, c-format
msgid "detected"
msgstr "检测到"
#: ../../network/netconnect.pm:1
#, c-format
msgid "The network needs to be restarted. Do you want to restart it ?"
msgstr "网络需要重新启动。你要重新启动吗?"
#: ../../standalone/drakbug:1
#, c-format
msgid "Package: "
msgstr "软件包:"
#: ../../standalone/drakboot:1
#, c-format
msgid "Can't write /etc/sysconfig/bootsplash."
msgstr "无法写入 /etc/sysconfig/bootsplash。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SECURITY WARNING!"
msgstr "安全警告!"
#: ../../standalone/drakfont:1
#, c-format
msgid "StarOffice"
msgstr "StarOffice"
#: ../../standalone/drakboot:1
#, c-format
msgid "No, I don't want autologin"
msgstr "否, 不要自动登录"
#: ../../standalone/drakbug:1
#, c-format
msgid "Windows Migration tool"
msgstr "Windows 迁移工具"
#: ../../any.pm:1 ../../help.pm:1
#, c-format
msgid "All languages"
msgstr "全部语言"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Removing %s"
msgstr "正在删除 %s"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "%s not found...\n"
msgstr "%s 未找到...\n"
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Testing your connection..."
msgstr "正在测试您的连接..."
#: ../../standalone/harddrake2:1
#, c-format
msgid "Cache size"
msgstr "缓存大小"
#: ../../security/level.pm:1
#, c-format
msgid ""
"Passwords are now enabled, but use as a networked computer is still not "
"recommended."
msgstr "启用了密码检查功能。但是仍不建议用于联网的电脑。"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Start sector: "
msgstr "开始扇区: "
#: ../../standalone/drakperm:1
#, c-format
msgid "Read"
msgstr "读取"
#: ../../lang.pm:1
#, c-format
msgid "Congo (Brazzaville)"
msgstr "刚果(布拉柴维尔)"
#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "需要安装软件包 %s。您同意安装吗?"
#: ../../lang.pm:1
#, c-format
msgid "Seychelles"
msgstr "塞舌尔"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Printerdrake has compared the model name resulting from the printer auto-"
"detection with the models listed in its printer database to find the best "
"match. This choice can be wrong, especially when your printer is not listed "
"at all in the database. So check whether the choice is correct and click "
"\"The model is correct\" if so and if not, click \"Select model manually\" "
"so that you can choose your printer model manually on the next screen.\n"
"\n"
"For your printer Printerdrake has found:\n"
"\n"
"%s"
msgstr ""
"Printerdrake 通过比较自动检测得到的打印机型号信息和它自己的打印机数据库中列出"
"的型号以发现最接近的匹配。如果您的打印机没有列在数据库中, 匹配结果可能是错"
"的. 请检查结果是否正确, 如果是 请选择“型号正确”否则“手工选择型号”会显示下一屏"
"幕让您手工选择打印机型号。\n"
"\n"
"Printerdrake 发现您的打印机是:\n"
"\n"
"%s"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Bad password on %s"
msgstr "%s 密码无效"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"There is one unknown printer directly connected to your system"
msgstr ""
"\n"
"有一个未知的打印机直接连接在您的系统"
#: ../../keyboard.pm:1
#, c-format
msgid "Right Control key"
msgstr "右侧 Ctrl 键"
#: ../../lang.pm:1
#, c-format
msgid "Zambia"
msgstr "赞比亚"
#: ../../security/level.pm:1
#, c-format
msgid "Security Administrator (login or email)"
msgstr "安全管理员 (登录名或 email)"
#: ../../standalone/drakgw:1
#, c-format
msgid "Sorry, we support only 2.4 kernels."
msgstr "对不起, 我们只支持 2.4 内核。"
#: ../../keyboard.pm:1
#, c-format
msgid "Romanian (qwerty)"
msgstr "罗马尼亚 (QWERTY 布局)"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Under Devel ... please wait."
msgstr "开发中...请等待新版本。"
#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Czech Republic"
msgstr "捷克共和国"
#: ../../lang.pm:1
#, c-format
msgid "Egypt"
msgstr "埃及"
#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Sound card"
msgstr "声卡"
#: ../../standalone/drakfont:1
#, c-format
msgid "Import Fonts"
msgstr "导入字体"
#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid ""
"You have one big MicroSoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"您有一个很大的 FAT 分区, \n"
"(通常是 Microsoft Dos/Windows 占用的)。\n"
"建议您先重设这个分区的大小\n"
"(点中它, 然后按“改变大小”)"
#: ../../standalone/drakfont:1
#, c-format
msgid "Suppress Temporary Files"
msgstr "删除临时文件"
#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"\n"
msgstr ""
"恭喜, 网络和 Internet 配置完成。\n"
"\n"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Change partition type"
msgstr "更改分区类型"
#: ../../help.pm:1
#, c-format
msgid ""
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"hardware. Choose the one that best suits your needs (you will be able to\n"
"change that after installation though). A sample of the chosen\n"
"configuration is shown in the monitor."
msgstr ""
"分辨率\n"
"\n"
" 您可以在此选择分辨率和颜色深度, 但您的硬件要支持。请选择最适合您需要的\n"
"选项(您在安装完成之后仍可进行修改)。所选配置的例子会显示在显示器上。"
#: ../../standalone/draksec:1
#, c-format
msgid "Network Options"
msgstr "网络选项"
#: ../../security/l10n.pm:1
#, c-format
msgid "Enable msec hourly security check"
msgstr "启用 msec 每小时安全检查"
#: ../../standalone/drakboot:1
#, c-format
msgid ""
"Display theme\n"
"under console"
msgstr ""
"在控制台\n"
"显示主题"
#: ../../standalone/net_monitor:1
#, c-format
msgid "Statistics"
msgstr "统计"
#: ../../printer/cups.pm:1
#, c-format
msgid "(on %s)"
msgstr "(在 %s)"
#: ../../mouse.pm:1
#, c-format
msgid "MM Series"
msgstr "MM Series"
#: ../../security/level.pm:1
#, c-format
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr "防止缓冲溢出和串格式攻击的库。"
#: ../../standalone/net_monitor:1
#, c-format
msgid "average"
msgstr "平均"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "New printer name"
msgstr "新打印机名称"
#: ../../fs.pm:1
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the "
"file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""
"允许普通用户装载文件系统。装载用户的用户名将写入 mtab，这样他就可以稍候\n"
"再次拆卸文件系统。此选项意味着选项 noexec，nosuid 以及 nodev(除非在选项\n"
"行中用单独的选项 user，exec，dev，suid 加以覆盖)。"
#: ../../lang.pm:1
#, c-format
msgid "Equatorial Guinea"
msgstr "赤道几内亚"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Build Backup"
msgstr "创建备份"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr "用命令“%s <文件>”或“%s <文件>”打印文件。\n"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Currently, no alternative possibility is available"
msgstr "现在, 没有两种供选择的选项"
#: ../../keyboard.pm:1
#, c-format
msgid "Romanian (qwertz)"
msgstr "罗马尼亚 (QWERTZ 布局)"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Write Config"
msgstr "写入配置"
#: ../../services.pm:1
#, c-format
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""
"后台服务 routed 允许通过 RIP 协议自动更新的 IP 路由表。\n"
"在小型网络上广泛的采用 RIP, 然而在更复杂的网络上需要更复杂的路由协议。"
#: ../../lang.pm:1
#, c-format
msgid "Kiribati"
msgstr "基里巴斯"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Other (not drakbackup) keys in place already"
msgstr ""
"其它(不是 drakbackup)\n"
"密钥已经有了"
#: ../../standalone/draksplash:1
#, c-format
msgid "Browse"
msgstr "浏览"
#: ../../harddrake/data.pm:1
#, c-format
msgid "CDROM"
msgstr "CDROM"
#: ../../network/tools.pm:1
#, c-format
msgid "Do you want to try to connect to the Internet now?"
msgstr "您想要测试连接到互联网吗?"
#: ../../keyboard.pm:1
#, c-format
msgid "Belgian"
msgstr "比利时"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Do you have an ISA sound card?"
msgstr "您有 ISA 声卡吗?"
#: ../../network/ethernet.pm:1
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system.\n"
"I cannot set up this connection type."
msgstr ""
"没有在您的系统里发现以太网卡。\n"
"无法设置这个连接类型。"
#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Windows"
msgstr "Windows"
#: ../../common.pm:1
#, c-format
msgid "Can't make screenshots before partitioning"
msgstr "无法在分区完成之前进行屏幕捕捉"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Host Name"
msgstr "主机名"
#: ../../standalone/logdrake:1
#, c-format
msgid "/File/Save _As"
msgstr "/文件(F)/另存为(_A)"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To get access to printers on remote CUPS servers in your local network you "
"only need to turn on the \"Automatically find available printers on remote "
"machines\" option; the CUPS servers inform your machine automatically about "
"their printers. All printers currently known to your machine are listed in "
"the \"Remote printers\" section in the main window of Printerdrake. If your "
"CUPS server(s) is/are not in your local network, you have to enter the IP "
"address(es) and optionally the port number(s) here to get the printer "
"information from the server(s)."
msgstr ""
"要访问局域网中远程 CUPS 服务器上的打印机, 您只需打开“自动查找远程计算机上\n"
"可用的打印机”选项；CUPS 服务器会自动通知您的计算机有关打印机的信息。目前\n"
"您计算机上可用的打印机都会列在 Printerdrake 的“远程打印机”栏中。如果您的\n"
"CUPS 服务器不在您的局域网中, 您就需要在此输入 IP 地址以及可选的端口号。这\n"
"样才能获得服务器的打印机信息。"
#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid ""
"drakTermServ Overview\n"
"\t\t\t \n"
" - Create Etherboot Enabled Boot Images:\n"
" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
"must be created.\n"
" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
"graphical interface\n"
" \t\tto help manage/customize these images. To create the file \n"
" \t\t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
"include in \n"
" \t\tdhcpd.conf, you should create the etherboot images for at least "
"one full kernel.\n"
"\n"
" - Maintain /etc/dhcpd.conf:\n"
" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
"assigning an IP address\n"
" \t\tand net boot images to the machine. drakTermServ helps create/"
"remove these entries.\n"
"\t\t\t\n"
" \t\t(PCI cards may omit the image - etherboot will request the "
"correct image. You should\n"
" \t\talso consider that when etherboot looks for the images, it "
"expects names like\n"
" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
"\t\t\t \n"
" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
"like:\n"
" \t\t\n"
"\t\t\t\thost curly {\n"
"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
"\t\t\t\t\tfixed-address 192.168.192.3;\n"
"\t\t\t\t\t#type fat;\n"
"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
"nbi\";\n"
"\t\t\t\t\t#hdw_config true;\n"
"\t\t\t\t}\n"
"\t\t\t\n"
"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
"entry for\n"
"\t\t\ta client machine, using a fixed address scheme facilitates using the "
"functionality\n"
"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
"\t\t\t\n"
"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
"either be 'thin'\n"
"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
"while fat clients run \n"
"\t\t\tmost software on the client machine. A special inittab, /etc/inittab\\$"
"\\$IP=client_ip\\$\\$ is\n"
"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
"gdm.conf are \n"
"\t\t\tmodified if thin clients are used, to enable xdmcp. Since there are "
"security issues in \n"
"\t\t\tusing xdmcp, hosts.deny and hosts.allow are modified to limit access "
"to the local\n"
"\t\t\tsubnet.\n"
"\t\t\t\n"
"\t\t\tNote: The \"#hdw_config\" entry is also only used by drakTermServ. "
"Clients can either \n"
"\t\t\tbe 'true' or 'false'. 'true' enables root login at the client machine "
"and allows local \n"
"\t\t\thardware configuration of sound, mouse, and X, using the 'drak' tools. "
"This is enabled \n"
"\t\t\tby creating seperate config files associated with the client's IP "
"address and creating \n"
"\t\t\tread/write mount points to allow the client to alter the file. Once "
"you are satisfied \n"
"\t\t\twith the configuration, you can remove root login priviledges from the "
"client.\n"
"\t\t\t\n"
"\t\t\tNote: You must stop/start the server after adding or changing "
"clients.\n"
"\t\t\t\n"
" - Maintain /etc/exports:\n"
" \t\tClusternfs allows export of the root filesystem to diskless "
"clients. drakTermServ\n"
" \t\tsets up the correct entry to allow anonymous access to the root "
"filesystem from\n"
" \t\tdiskless clients.\n"
"\n"
" \t\tA typical exports entry for clusternfs is:\n"
" \t\t\n"
" \t\t/ (ro,all_squash)\n"
" \t\t/home SUBNET/MASK(rw,root_squash)\n"
"\t\t\t\n"
"\t\t\tWith SUBNET/MASK being defined for your network.\n"
" \t\t\n"
" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
" \t\tFor users to be able to log into the system from a diskless "
"client, their entry in\n"
" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
"\\$. drakTermServ helps\n"
" \t\tin this respect by adding or removing system users from this "
"file.\n"
"\n"
" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
" \t\tThrough clusternfs, each diskless client can have it's own "
"unique configuration files\n"
" \t\ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
" \t\tdrakTermServ will help create these files.\n"
"\n"
" - Per client system configuration files:\n"
" \t\tThrough clusternfs, each diskless client can have it's own "
"unique configuration files\n"
" \t\ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"\t\t\t\tclients can customize files such as /etc/modules.conf, /etc/"
"sysconfig/mouse, \n"
" \t\t/etc/sysconfig/keyboard on a per-client basis.\n"
"\n"
" Note: Enabling local client hardware configuration does enable root "
"login to the terminal \n"
" server on each client machine that has this feature enabled. Local "
"configuration can be turned\n"
" back off, retaining the configuration files, once the client machine "
"is configured.\n"
"\t\t\n"
" - /etc/xinetd.d/tftp:\n"
" \t\tdrakTermServ will configure this file to work in conjunction "
"with the images created by\n"
" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
"the boot image to each\n"
" \t\tdiskless client.\n"
"\n"
" \t\tA typical tftp configuration file looks like:\n"
" \t\t\n"
" \t\tservice tftp\n"
" \t\t(\n"
" disable = no\n"
" socket_type = dgram\n"
" protocol = udp\n"
" wait = yes\n"
" user = root\n"
" server = /usr/sbin/in.tftpd\n"
" server_args = -s /var/lib/tftpboot\n"
" \t\t}\n"
" \t\t\n"
" \t\tThe changes here from the default installation are changing the "
"disable flag to\n"
" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
"mkinitrd-net\n"
" \t\tputs it's images.\n"
"\n"
" - Create etherboot floppies/CDs:\n"
" \t\tThe diskless client machines need either ROM images on the NIC, "
"or a boot floppy\n"
" \t\tor CD to initate the boot sequence. drakTermServ will help "
"generate these images,\n"
" \t\tbased on the NIC in the client machine.\n"
" \t\t\n"
" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
"manually:\n"
" \t\t\n"
" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
" \n"
"\n"
msgstr ""
"drakTermServ 概览\n"
"\t\t\t \n"
" - 创建 Etherboot 的以太网启动映像:\n"
" \t\t要通过 etherboot 启动核心, 必须创建特殊的 kernel/initrd 映像。\n"
" \t\tmkinitrd-net 能够在这一过程中发挥很大作用, 而 drakTermServ 仅仅"
"是\n"
" \t\t帮助管理/定制这些映像的图形化界面。\n"
"\n"
" - 维护 /etc/dhcpd.conf:\n"
" \t\t要通过网络启动客户端, 每个客户端都需要一个 dhcpd.conf 项, 指派"
"一\n"
" \t\t个 IP 地址和机器的网络启动映像。drakTermServ 能够帮助创建/删除"
"这\n"
" \t\t些项。\n"
"\t\t\t\n"
" \t\t(PCI 卡可以省略映像 - etherboot 会请求正确的映像。您应该还考"
"虑 \t\tetherboot 何时查找映像, 因此需要被命名为\n"
" \t\tboot-3c59x.nbi, 而不是 boot-3c59x.2.4.19-16mdk.nbi)。\n"
"\t\t\t \n"
" \t\t一个可以支持无盘工作站典型的 dhcpd.conf 应该是这样:\n"
" \t\t\n"
"\t\t\t\thost curly {\n"
"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
"\t\t\t\t\tfixed-address 192.168.192.3;\n"
"\t\t\t\t\t#type fat;\n"
"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
"nbi\";\n"
"\t\t\t\t}\n"
"\t\t\t\n"
"\t\t\t尽管您可以使用 IP 地址池, 而不是为某个客户机设置特定的地址, 但使用固"
"定\n"
"\t\t\t地址方案将会促进 ClusterNFS 所提供的指定客户端配置文件的功能。\n"
"\t\t\t\n"
"\t\t\t注意: “#type”项仅由 drakTermServ 使用。客户端可以是“thin”或\n"
"\t\t\t“fat”。瘦客户端可以通过 xdmcp 运行服务器上的大多数软件, 而胖客户端则\n"
"\t\t\t在本机上运行大多数软件。有一个特殊的 inittab, \n"
"\t\t\t/etc/inittab\\$\\$IP=client_ip\\$\\$ 是专为瘦客户端写的。如果使用的是"
"瘦\n"
"\t\t\t客户端, 为了启用 xdmcp, 则需要修改系统配置文件 xdm-config, kdmrc 和 \n"
"\t\t\tgdm.conf。考虑到使用 xdmcp 时可能出现的安全问题, 需要修改 host.deny "
"和 \n"
"\t\t\thosts.allow 来限制仅可由本地子网访问。\n"
"\t\t\t\n"
"\t\t\t注意: 在添加或更改客户端后您必须停止/启动服务器。\n"
"\t\t\t\n"
" - 维护 /etc/exports:\n"
" \t\tClusternfs 允许将 root 文件系统导出到无盘工作站。drakTermServ\n"
" \t\t会设置正确的选项以便允许从无盘客户端匿名访问 root 文件系统。\n"
"\n"
" \t\tClusternfs 的典型导出项为:\n"
" \t\t\n"
" \t\t/ (ro,all_squash)\n"
" \t\t/home 子网/掩码(rw,root_squash)\n"
"\t\t\t\n"
"\t\t\t这里 子网/掩码应该与您的网络相同。\n"
" \t\t\n"
" - 维护 /etc/shadow\\$\\$CLIENT\\$\\$:\n"
" \t\t对于那些想要从无盘工作站登录到系统的用户来说, 他们所对应的登录"
"项\n"
" \t\t除了要在 /etc/shadow 中之外, 还应在 /etc/shadow\\$\\$CLIENTS\\$\\"
"$\n"
" \t\t中存有副本。drakTermServ 能够帮助您完成这一过程。\n"
"\n"
" - 每客户 /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
" \t\t通过 clusternfs, 每个无盘工作站都可以在服务器的 root 文件系统中"
"有\n"
" \t\t其自己唯一的配置文件。在 drakTermServ 的未来版本中, 将会帮助您创"
"建\n"
" \t\t这些文件。\n"
"\n"
" - 每客户系统配置文件:\n"
" \t\t通过 clusternfs, 每个无盘工作站都可以在服务器的 root 文件系统中"
"有\n"
" \t\t其自己唯一的配置文件。在 drakTermServ 的未来版本中, 将会帮助您创"
"建\n"
" \t\t这些文件。如基于每客户的 /etc/modules.conf, /etc/sysconfig/"
"mouse,\n"
" \t\t/etc/sysconfig/keyborad。\n"
"\n"
" - /etc/xinetd.d/tftp:\n"
" \t\tdrakTermServ 将配置此文件以便能与由 mkinitrd-net 创建的映像一起工"
"作,\n"
" \t\t同时还有 /etc/dhcpd.conf, 这样可以为每个无盘工作站提供启动映"
"像。\n"
"\n"
" \t\t典型的 tftp 配置文件看起来与下面类似:\n"
" \t\t\n"
" \t\tservice tftp\n"
" \t\t(\n"
" disable = no\n"
" socket_type = dgram\n"
" protocol = udp\n"
" wait = yes\n"
" user = root\n"
" server = /usr/sbin/in.tftpd\n"
" server_args = -s /var/lib/tftpboot\n"
" \t\t}\n"
" \t\t\n"
" \t\t与默认安装相比, 这里的更改在于将 disable 标志置为“no”, 并且将目录"
"更改\n"
" \t\t为 /var/lib/tftpboot, 这里正是 mkinitrd-net 存放映像的地点。\n"
"\n"
" - 创建 etherboot 软盘/光盘:\n"
" \t\t无法工作站需要在网卡上有 ROM 镜像, 或者启动软盘或光盘来初始化启动"
"过程。\n"
" \t\tdrakTermServ 能够帮助您根据客户端计算机的网卡生成这些镜像。\n"
" \t\t\n"
" \t\t为 3Com 3c509 手工创建一张启动软盘的例子:\n"
" \t\t\n"
" \t\tcat /usr/lib/etherboot/boot1a.bin /\\n \t\t\t/usr/lib/"
"etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
" \n"
"\n"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "%s is not in the scanner database, configure it manually?"
msgstr "扫描仪数据库中没有 %s, 要手工配置它吗?"
#: ../../any.pm:1
#, c-format
msgid "Delay before booting default image"
msgstr "启动默认映像前的延迟"
#: ../../any.pm:1
#, c-format
msgid "Restrict command line options"
msgstr "限制命令行选项"
#: ../../standalone/drakxtv:1
#, c-format
msgid "East Europe"
msgstr "东欧"
#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
msgid "Use free space"
msgstr "使用空闲空间"
#: ../../network/adsl.pm:1
#, c-format
msgid "use dhcp"
msgstr "使用 dhcp"
#: ../../standalone/logdrake:1
#, c-format
msgid "Mail alert"
msgstr "邮件报警"
#: ../../network/tools.pm:1
#, c-format
msgid "Internet configuration"
msgstr "Internet 配置"
#: ../../lang.pm:1
#, c-format
msgid "Uzbekistan"
msgstr "乌兹别克斯坦"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Detected %s"
msgstr "检测到 %s"
#: ../../standalone/harddrake2:1
#, c-format
msgid "/Autodetect _printers"
msgstr "/自动检测打印机(_P)"
#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
#: ../../interactive/newt.pm:1
#, c-format
msgid "Finish"
msgstr "完成"
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Show automatically selected packages"
msgstr "自动显示选中的软件包"
#: ../../lang.pm:1
#, c-format
msgid "Togo"
msgstr "多哥"
#: ../../standalone/harddrake2:1
#, c-format
msgid "CPU flags reported by the kernel"
msgstr "核心报告的 CPU 标志"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Something went wrong! - Is mkisofs installed?"
msgstr "发生错误! - mkisofs 安装了吗?"
#: ../../Xconfig/card.pm:1
#, c-format
msgid "16 MB"
msgstr "16 MB"
#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Please try again"
msgstr "请再试一次"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The model is correct"
msgstr "型号正确"
#: ../../install_interactive.pm:1
#, c-format
msgid "FAT resizing failed: %s"
msgstr "自动调整大小失败： %s"
#: ../../help.pm:1 ../../install_steps_gtk.pm:1
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Individual package selection"
msgstr "选择单个软件包"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "This partition is not resizeable"
msgstr "不能改变这个分区的大小"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Location"
msgstr "位置"
#: ../../standalone/drakxtv:1
#, c-format
msgid "USA (cable-hrc)"
msgstr "美国(cable-hrc)"
#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Journalised FS"
msgstr "Journalised FS"
#: ../../security/l10n.pm:1
#, c-format
msgid "Ethernet cards promiscuity check"
msgstr "以太网卡混用检查"
#: ../../lang.pm:1
#, c-format
msgid "Guatemala"
msgstr "危地马拉"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "This machine"
msgstr "本机"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS 下的盘符: %s ( 只是猜测 )\n"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Select the files or directories and click on 'OK'"
msgstr "选择文件或目录, 然后单击“确定”"
#: ../../lang.pm:1
#, c-format
msgid "Bahrain"
msgstr "巴林"
#: ../../standalone/drakfloppy:1
#, c-format
msgid "omit scsi modules"
msgstr "省略 scsi 模块"
#: ../../standalone/harddrake2:1
#, c-format
msgid "family of the cpu (eg: 6 for i686 class)"
msgstr "CPU 家族(如 6 代表 i686 级别)"
#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""
"由于您正在执行网络安装, 您的网络已经配置好了。\n"
"单击 确定 保存配置, 或 取消 重新配置网络。\n"
#: ../../security/l10n.pm:1
#, c-format
msgid "Run the daily security checks"
msgstr "运行每日安全检查"
#: ../../Xconfig/various.pm:1
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "键盘的布局: %s\n"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Here you can choose whether the printers connected to this machine should be "
"accessable by remote machines and by which remote machines."
msgstr ""
"您可以在此选择是否将连接到本机的打印机共享给远程计算机, 以及共享给哪些计算"
"机。"
#: ../../keyboard.pm:1
#, c-format
msgid "Maltese (US)"
msgstr "马耳他(美国)"
#: ../../services.pm:1
#, c-format
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"加载和卸载所有网络文件系统(NFS), SMB (Lan\n"
"Manager/Windows), 和 NCP (NetWare) 加载点。"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Launch the wizard"
msgstr "调用向导"
#: ../../harddrake/data.pm:1
#, c-format
msgid "Tvcard"
msgstr "电视卡"
#: ../../help.pm:1
#, c-format
msgid "Toggle between normal/expert mode"
msgstr "在正常/专家模式间切换"
#: ../../standalone/drakfloppy:1
#, c-format
msgid "Size"
msgstr "大小"
#: ../../help.pm:1
#, c-format
msgid "GRUB"
msgstr "GRUB"
#: ../../lang.pm:1
#, c-format
msgid "Greenland"
msgstr "格陵兰"
#: ../../mouse.pm:1
#, c-format
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "罗技 MouseMan+/FirstMouse+"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Not the correct tape label. Tape is labelled %s."
msgstr "磁带标记不对。这盘磁带是 %s。"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"For a mulitsession CD, only the first session will erase the cdrw. Otherwise "
"the cdrw is erased before each backup."
msgstr ""
#: ../../standalone/drakgw:1
#, c-format
msgid ""
"The setup of Internet Connection Sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"互联网连接共享的设定已经完成。\n"
"它当前已经被启用。\n"
"\n"
"您要做什么?"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Delete All NBIs"
msgstr "删除所有 NBI"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"This dialog allows you to fine tune your bootloader:\n"
"\n"
" * \"%s\": there are three choices for your bootloader:\n"
"\n"
" * \"%s\": if you prefer grub (text menu).\n"
"\n"
" * \"%s\": if you prefer LILO with its text menu interface.\n"
"\n"
" * \"%s\": if you prefer LILO with its graphical interface.\n"
"\n"
" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
"you prefer, the bootloader can be installed on the second hard drive\n"
"(\"%s\"), or even on a floppy disk (\"%s\");\n"
"\n"
" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
"given to the user at the console to select a boot entry other than the\n"
"default.\n"
"\n"
"!! Beware that if you choose not to install a bootloader (by selecting\n"
"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
"system! Be sure you know what you are doing before changing any of the\n"
"options. !!\n"
"\n"
"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
"are normally reserved for the expert user."
msgstr ""
"此对话框允许调整您的启动引导程序。\n"
"\n"
" *“要使用的引导程序”：有三个选择：\n"
"\n"
" *“GRUB”：如果您喜欢 grub(文本菜单)。\n"
"\n"
" *“LILO 文本菜单”：如果您喜欢 LILO 的文本菜单界面。\n"
"\n"
" *“LILO 图形菜单”：如果您喜欢 LILO 的图形菜单界面。\n"
"\n"
" *“启动设备”：通常您不需要更改默认的启动设备(“/dev/hda”)。但是, 如果\n"
"您愿意, 也可以把引导程序安装在第二个硬盘上(“/dev/hdb”), 甚至是一张软盘\n"
"(“/dev/fd0”)上。\n"
"\n"
" *“引导默认镜像之前的延迟”：当启动或重新启动系统时, 会在控制台中留给用户\n"
"指定的时间, 以便可以选择除默认值外的其它启动选项。\n"
"\n"
"！！注意：如果您在这里选择不安装开机引导程序(选“跳过”), 您必须准备其它\n"
"方法引导您的 Mandrake Linux 系统！不管修改任何选项, 一定要清楚您在做什么！\n"
"\n"
"单击此对话框中的“高级”按钮可为专家用户提供高级的选项。"
#: ../../security/help.pm:1
#, c-format
msgid ""
"if set, send the mail report to this email address else send it to root."
msgstr "如果设置, 发送邮件报告到这个邮箱地址, 或者发给 root。"
#: ../../Xconfig/card.pm:1
#, c-format
msgid "Which configuration of XFree do you want to have?"
msgstr "您希望拥有哪个 XFree 配置?"
#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "More"
msgstr "更多"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"This uses the same syntax as the command line program 'cdrecord'. 'cdrecord -"
"scanbus' would also show you the device number."
msgstr ""
#: ../../security/level.pm:1
#, c-format
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which can "
"accept\n"
"connections from many clients. Note: if your machine is only a client on the "
"Internet, you should choose a lower level."
msgstr ""
"使用这个安全级别, 此系统可以作为服务器使用。\n"
"拥有足够的安全性, 系统可以作为服务器接受来自众多客户的连接。注意: 如果您的机"
"器不在互联网上提供服务, 请选择一个较低级别。"
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Account Password"
msgstr "帐户密码"
#: ../../standalone/drakhelp:1
#, c-format
msgid ""
"%s cannot be displayed \n"
". No Help entry of this type\n"
msgstr ""
"无法显示 %s。\n"
"此类型没有帮助主题\n"
#: ../../any.pm:1
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"您决定在一个分区上安装启动引导程序。\n"
"那么在用于启动的硬盘上您应该已经有一个安装启动引导程序(例如：System "
"Commander)。\n"
"\n"
"您要用哪个硬盘启动?"
#: ../../keyboard.pm:1
#, c-format
msgid "Tajik keyboard"
msgstr "塔吉克键盘"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can copy the printer configuration which you have done for the spooler %"
"s to %s, your current spooler. All the configuration data (printer name, "
"description, location, connection type, and default option settings) is "
"overtaken, but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
"您可以把做好的打印机配置从队列 %s 复制到 %s, 您当前的队列。\n"
"所有配置数据将被覆盖, 但是打印作业不会迁移。\n"
"由于以下原因, 某些打印队列无法迁移:\n"
#: ../../standalone/drakfont:1
#, c-format
msgid "Font List"
msgstr "字体列表"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader. If you don't see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"您可能得改变固件引导设备来使能启动引导程序。\n"
"如果开机时没有引导程序提示, 按Command-Option-O-F然后输入:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" 然后输入: shut-down\n"
"您将在下次开机时看到引导程序提示。"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"You appear to have an OldWorld or Unknown\n"
" machine, the yaboot bootloader will not work for you.\n"
"The install will continue, but you'll\n"
" need to use BootX or some other means to boot your machine"
msgstr ""
"看来您用的是老掉牙或不认识的机器,\n"
" yaboot 启动引导程序无法为您工作。\n"
"安装将继续, 不过您需要\n"
" 使用 BootX 或其它方式启动您的机器"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Select file"
msgstr "选择文件"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Choose the network or host on which the local printers should be made "
"available:"
msgstr "选择本地打印机适用的网络或主机:"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""
"该命令您可用在许多应用的打印对话框的“打印命令”中,因为应用程序会提供要打印的文"
"件, 所以那里不用写文件名。\n"
#: ../../lang.pm:1
#, c-format
msgid "Japan"
msgstr "日本"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print option list"
msgstr "打印机选项列表"
#: ../../standalone/localedrake:1
#, c-format
msgid "The change is done, but to be effective you must logout"
msgstr "修改已经完成, 不过您必须退出登录修改才会生效"
#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Country / Region"
msgstr "国家/地区"
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Search servers"
msgstr "搜索服务器"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "NCP queue name missing!"
msgstr "NCP 队列名未找到!"
#: ../../standalone/net_monitor:1
#, c-format
msgid ""
"Warning, another internet connection has been detected, maybe using your "
"network"
msgstr "警告, 检测到了另外的 Internet 连接, 可能使用您的网络"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "标号 %s 的光盘"
#: ../../standalone/drakbackup:1
#, c-format
msgid "CDRW media"
msgstr "CDRW 介质"
#: ../../services.pm:1
#, c-format
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr "保存和恢复系统的熵池, 可以产生更高品质的随机数。"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can loose data)"
msgstr "检查文件系统 %s 失败。您想修复错误吗? (注意, 有可能丢失数据)"
#: ../../share/advertising/07-server.pl:1
#, c-format
msgid "Turn your computer into a reliable server"
msgstr "把您的机器变成可靠的服务器"
#: ../../security/l10n.pm:1
#, c-format
msgid "Check empty password in /etc/shadow"
msgstr "检查 /etc/shadow 中的空密码"
#: ../../network/network.pm:1
#, c-format
msgid " (driver %s)"
msgstr "(驱动 %s)"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Loopback file(s):\n"
" %s\n"
msgstr ""
"回环文件:\n"
" %s\n"
#: ../../network/isdn.pm:1
#, c-format
msgid "I don't know"
msgstr "我不知道"
#: ../../services.pm:1
#, c-format
msgid "Start when requested"
msgstr ""
#: ../../printer/main.pm:1
#, c-format
msgid ", TCP/IP host \"%s\", port %s"
msgstr ", TCP/IP 主机“%s”, 端口 %s"
#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Do you want to continue?"
msgstr ""
"现在配置自动安装软盘。小心点。\n"
"\n"
"您可以重复该机器的安装, 交互提示步骤, 修改数值。\n"
"\n"
"为安全起见, 分区及格式化不会自动执行。\n"
"\n"
"继续吗?"
#: ../../keyboard.pm:1
#, c-format
msgid "Telugu"
msgstr "泰卢固"
#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""
"\n"
"\n"
"您的声卡现在正在使用 %s“%s”驱动程序(其默认驱动程序为“%s”)"
#: ../../standalone/drakfont:1
#, c-format
msgid "Post Uninstall"
msgstr "删除后的设定"
#: ../../standalone/net_monitor:1
#, c-format
msgid "Connecting to Internet "
msgstr "正在连接到 Internet"
#: ../../standalone/scannerdrake:1
#, c-format
msgid " ("
msgstr " ("
#: ../../standalone/harddrake2:1
#, c-format
msgid "Cpuid level"
msgstr "CPUID 级别"
#: ../../keyboard.pm:1
#, c-format
msgid "Mongolian (cyrillic)"
msgstr "蒙古(西里尔)"
#: ../../standalone/drakfloppy:1
#, c-format
msgid "Add a module"
msgstr "增加模块"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Profile to delete:"
msgstr "要删除的配置文件:"
#: ../../standalone/net_monitor:1
#, c-format
msgid "Local measure"
msgstr "本机测量"
#: ../../network/network.pm:1
#, c-format
msgid "Warning : IP address %s is usually reserved !"
msgstr "警告: IP 地址 %s 通常是被保留的!"
#: ../../mouse.pm:1
#, c-format
msgid "busmouse"
msgstr "busmouse"
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Account Login (user name)"
msgstr "帐户名称"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Fdiv bug"
msgstr "Fdiv 错误"
#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"Make sure you have configured your Network/Internet access with\n"
"drakconnect before going any further."
msgstr ""
"drakfirewall 防火墙配置\n"
"\n"
"请确定您在继续任何操作前已经用 drakconnect 配置了您的网络/互联网访问。"
#: ../../security/l10n.pm:1
#, c-format
msgid "Accept broadcasted icmp echo"
msgstr "接受广播 ICMP 回应"
#: ../../lang.pm:1
#, c-format
msgid "Uruguay"
msgstr "乌拉圭"
#: ../../lang.pm:1
#, c-format
msgid "Benin"
msgstr "贝宁"
#: ../../standalone/drakperm:1
#, c-format
msgid "Path selection"
msgstr "选择路径"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Name/IP address of host:"
msgstr "主机的名称/IP 地址:"
#: ../../Xconfig/various.pm:1
#, c-format
msgid "Monitor: %s\n"
msgstr "显示器: %s\n"
#: ../../partition_table/raw.pm:1
#, c-format
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random, corrupted "
"data."
msgstr ""
"您的硬盘有严重问题。\n"
"一次数据完整性检查失败了。\n"
"以后您不要在这个硬盘上保存任何东西, 否则您将无法取出您的数据."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer host name or IP missing!"
msgstr "缺少打印机主机名或 IP 地址!"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Please check all users that you want to include in your backup."
msgstr "请选择您希望备份的用户"
#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"The %s must be configured by printerdrake.\n"
"You can launch printerdrake from the Mandrake Control Center in Hardware "
"section."
msgstr ""
"这个 %s 必须使用 printerdrake 来配置。\n"
"您可以在 Mandrake 控制中心的硬件部分打开 printerdrake。"
#: ../../lang.pm:1
#, c-format
msgid "Bangladesh"
msgstr "孟加拉"
#: ../../standalone/drakxtv:1
#, c-format
msgid "Japan (cable)"
msgstr "日本 (有线)"
#: ../../standalone/drakfont:1
#, c-format
msgid "Initial tests"
msgstr "初始测试"
#: ../../network/isdn.pm:1
#, c-format
msgid "Continue"
msgstr "继续"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Custom Restore"
msgstr "定制恢复"
#: ../../help.pm:1
#, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
"If you notice the sound card displayed is not the one that is actually\n"
"present on your system, you can click on the button and choose another\n"
"driver."
msgstr ""
"“%s”：如果发现您的系统有声卡, 就会在此显示出来。如果您觉得在此显示\n"
"的声卡与您实际拥有的声卡不符的话, 就可以单击该按钮选择其它的驱动程序。"
#: ../../security/help.pm:1
#, c-format
msgid "Set the root umask."
msgstr "设置 root umask。"
#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Script-based"
msgstr "基于脚本登录"
#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
msgid "Error reading file %s"
msgstr "请取文件 %s 出错"
#: ../../harddrake/v4l.pm:1
#, c-format
msgid "PLL setting:"
msgstr "PLL 设置:"
#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "您必须有一个FAT分区载入 /boot/efi"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid " on "
msgstr " 位于 "
#: ../../diskdrake/dav.pm:1
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "Url 应该是以 http:// 或 https:// 开头"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""
"您可以直接使用 URI 访问打印机。URI 必须符合CUPS 或 Foomatic 规定。但注意不是"
"所有的打印队列 (spooler) 都支持 URI。"
#: ../../any.pm:1
#, c-format
msgid "Other OS (SunOS...)"
msgstr "其它操作系统(SunOS...)"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Install/Upgrade"
msgstr "新装/升级"
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "%d packages"
msgstr "%d 个软件包"
#: ../../standalone.pm:1
#, c-format
msgid ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Backup and Restore application\n"
"\n"
"--default : save default directories.\n"
"--debug : show all debug messages.\n"
"--show-conf : list of files or directories to backup.\n"
"--config-info : explain configuration file options (for non-X "
"users).\n"
"--daemon : use daemon configuration. \n"
"--help : show this message.\n"
"--version : show version number.\n"
msgstr ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"备份和恢复程序\n"
"\n"
"--default : 保存默认目录。\n"
"--debug : 显示全部调试信息。\n"
"--show-conf : 列出要备份的文件或目录。\n"
"--config-info : 解释配置文件选项(对非 X 用户)。\n"
"--daemon : 使用守护程序设置。\n"
"--help : 显示此信息。\n"
"--version : 显示版本号。\n"
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Domain Authentication Required"
msgstr "需要域认证"
#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"\n"
"\n"
" Thanks:\n"
"\t- LTSP Project http://www.ltsp.org\n"
"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
"\n"
msgstr ""
"\n"
"\n"
"感谢:\n"
"\t- LTSP 项目 http://www.ltsp.org\n"
"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
"\n"
#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Costa Rica"
msgstr "哥斯达黎加"
#: ../../security/level.pm:1
#, c-format
msgid "Use libsafe for servers"
msgstr "服务器使用 libsafe"
#: ../../keyboard.pm:1
#, c-format
msgid "Icelandic"
msgstr "冰岛"
#: ../../standalone.pm:1
#, c-format
msgid ""
"\n"
"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "
msgstr ""
"\n"
"用法: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Maximum size\n"
" allowed for Drakbackup (MB)"
msgstr ""
"允许 Drakbackup\n"
" 使用的最大空间(Mb)"
#: ../../my_gtk.pm:1
#, c-format
msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
#: ../../standalone/drakboot:1
#, c-format
msgid "Lilo/grub mode"
msgstr "Lilo/grub 模式"
#: ../../standalone/drakfloppy:1
#, c-format
msgid "Output"
msgstr "输出"
#: ../../loopback.pm:1
#, c-format
msgid "Circular mounts %s\n"
msgstr "循环装载 %s\n"
#: ../../lang.pm:1
#, c-format
msgid "Martinique"
msgstr "马提尼克"
#: ../../standalone/drakbackup:1
#, c-format
msgid "HardDrive / NFS"
msgstr "硬盘 / NFS"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Old user list:\n"
msgstr ""
"\n"
"- 用户文件:\n"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Search Backups"
msgstr "搜索备份"
#: ../../modules/parameters.pm:1
#, c-format
msgid "a number"
msgstr "一个数字"
#: ../../keyboard.pm:1
#, c-format
msgid "Swedish"
msgstr "瑞典语"
#. -PO: the %s is the driver type (scsi, network, sound,...)
#: ../../modules/interactive.pm:1
#, c-format
msgid "Which %s driver should I try?"
msgstr "尝试使用哪个 %s 驱动程序?"
#: ../../standalone/logdrake:1
#, c-format
msgid ""
"You will receive an alert if one of the selected services is no longer "
"running"
msgstr "如果选中的服务中有任何一个停止运行您将收到警报"
#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Filesystem types:"
msgstr "文件系统类型:"
#: ../../lang.pm:1
#, c-format
msgid "Northern Mariana Islands"
msgstr "北马里亚那岛"
#: ../../printer/main.pm:1
#, c-format
msgid ", multi-function device on HP JetDirect"
msgstr ", HP JetDirect 打印服务器上的多功能设备"
#: ../../mouse.pm:1
#, c-format
msgid "none"
msgstr "没有"
#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"Name of the profile to create (the new profile is created as a copy of the "
"current one) :"
msgstr "要创建的配置文件名(新配置文件将会根据当前配置创建):"
#: ../../harddrake/data.pm:1
#, c-format
msgid "Floppy"
msgstr "软盘"
#: ../../standalone/drakfont:1
#, c-format
msgid "Ghostscript referencing"
msgstr "Ghostscript 引用"
#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Bootloader"
msgstr "启动引导程序"
#: ../../security/l10n.pm:1
#, c-format
msgid "Authorize all services controlled by tcp_wrappers"
msgstr "认证全部由 tcp_wrappers 控制的服务"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Move"
msgstr "移动"
#: ../../any.pm:1 ../../help.pm:1
#, c-format
msgid "Bootloader to use"
msgstr "要使用的启动引导程序"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SMB server host"
msgstr "SMB 服务器主机"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Name Servers:"
msgstr "命名服务器:"
#: ../../install_messages.pm:1
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer, duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""
"\n"
"警告\n"
"\n"
"请仔细阅读下列的条款。如果您不同意其中任何部分, 您就不可以安装下一个\n"
"光盘上的软件。选择“拒绝”\n"
"将继续安装其它介质上的软件。\n"
"\n"
"\n"
"下一个光盘的部分内容的许可协议不是 GPL 或类似的协议。每个这样的内容\n"
"受到各自不同的条件和条款的限制。\n"
"在您使用或重新分发该内容之前, 请仔细阅读并遵守其特定的\n"
"许可协议。\n"
"通常这些协议会限制对该内容进行转换, 复制 \n"
"(备份目的除外), 再次分发, 反向工程, 反汇编, 反编译 \n"
"或其它修改。\n"
"如果违背任何协议的条款, 协议赋予您的权利也立即终止。\n"
"除非协议中有特定的条款赋予您相关权利, \n"
"您通常不能在超过一台系统中安装该程序, 或把它应用在网络上。\n"
"如果有疑问, 请直接与该内容的发行者或作者联系。\n"
"向第三方转让或复制这些内容, 包括其文档通常是被禁止的。\n"
"\n"
"\n"
"下一个光盘的内容的全部权利分别属于它们各自的作者, \n"
"并受到可应用与软件程序的知识产权和版权法律的保护。\n"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
msgstr "从Star Office/OpenOffice.org/GIMP删除这个打印机"
#: ../../services.pm:1
#, c-format
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr "Linux虚拟服务器, 用来构架高效和高可用系统。"
#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "4 billion colors (32 bits)"
msgstr "40 亿色 (32 位)"
#: ../../lang.pm:1
#, c-format
msgid "Micronesia"
msgstr "密克罗尼西亚"
#: ../../steps.pm:1
#, c-format
msgid "License"
msgstr "许可证"
#: ../../standalone/drakbackup:1
#, c-format
msgid "This may take a moment to generate the keys."
msgstr "生成密钥需要一些时间。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
msgstr "打印机自动检测 (本地, TCP/Socket 和 SMB 打印机)"
#: ../../network/adsl.pm:1
#, c-format
msgid "Sagem (using pppoa) usb"
msgstr "Sagem (使用 pppoa) USB"
#: ../../install_any.pm:1
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"发生错误! 新建文件系统时找不到可用的设备。\n"
"请检查您的硬件以确定问题的原因!"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Starting the printing system at boot time"
msgstr "开机时启动打印系统"
#: ../../network/netconnect.pm:1
#, c-format
msgid "Do you want to start the connection at boot?"
msgstr "您是否希望一开机就启动连接?"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Processor ID"
msgstr "处理器 ID"
#: ../../harddrake/sound.pm:1
#, c-format
msgid "Sound trouble shooting"
msgstr "声音疑难解决"
#: ../../keyboard.pm:1
#, c-format
msgid "Polish (qwerty layout)"
msgstr "波兰 (QWERTY 布局)"
#: ../../standalone/drakconnect:1
#, c-format
msgid "activate now"
msgstr "现在激活"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Drakbackup activities via CD:\n"
"\n"
msgstr ""
"\n"
"Drakbackup 的光盘操作:\n"
"\n"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are about to install the printing system %s on a system running in the %"
"s security level.\n"
"\n"
"This printing system runs a daemon (background process) which waits for "
"print jobs and handles them. This daemon is also accessable by remote "
"machines through the network and so it is a possible point for attacks. "
"Therefore only a few selected daemons are started by default in this "
"security level.\n"
"\n"
"Do you really want to configure printing on this machine?"
msgstr ""
"您正在安装 %s 打印系统到 %s 安全级别的系统上。\n"
"\n"
"该打印系统在后台运行留守程序, 留守程序能通过网络\n"
"进行远程访问,而可能遭受攻击。该安全级别却省\n"
"启动少数选择的留守程序。\n"
"\n"
"您要配置打印吗?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Host \"%s\", port %s"
msgstr "主机“%s”, 端口 %s"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "This partition can't be used for loopback"
msgstr "这个分区不能被用于回环"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "File already exists. Use it?"
msgstr "文件已经存在。使用现有的文件?"
#: ../../standalone/net_monitor:1
#, c-format
msgid "received: "
msgstr "已收:"
#: ../../keyboard.pm:1
#, c-format
msgid "Right Alt key"
msgstr "右边的 ALT 键"
#: ../../standalone/harddrake2:1
#, c-format
msgid "the list of alternative drivers for this sound card"
msgstr "这个声卡的替代驱动程序列表"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Gateway"
msgstr "网关"
#: ../../lang.pm:1
#, c-format
msgid "Tonga"
msgstr "汤加"
#: ../../lang.pm:1
#, c-format
msgid "Tunisia"
msgstr "突尼斯"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Scanner sharing"
msgstr "扫描仪共享"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Profile: "
msgstr "配置文件: "
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Click on a device in the left tree in order to display its information here."
msgstr "单击左侧树中的设备, 就可在此显示其信息。"
#: ../../security/help.pm:1
#, c-format
msgid "Allow/Forbid autologin."
msgstr "允许/禁止自动登录。"
#: ../../standalone/drakxtv:1
#, c-format
msgid "XawTV isn't installed!"
msgstr "XawTV 没有安装!"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Do not include critical files (passwd, group, fstab)"
msgstr "不包括关键文件 (passwd, group, fstab) "
#: ../../standalone/harddrake2:1
#, c-format
msgid "old static device name used in dev package"
msgstr "dev 软件包中使用的旧的静态设备名"
#: ../../security/l10n.pm:1
#, c-format
msgid "Enable the logging of IPv4 strange packets"
msgstr "启用 IPv4 怪包日志"
#: ../../any.pm:1
#, c-format
msgid "This label is already used"
msgstr "这个名字已经被使用"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer or connected directly to the network.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network printers when you don't need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"欢迎使用打印机设置向导\n"
"\n"
"本向导将帮助您安装您的打印机, 不论打印机是直接连接在本机上, 还是直接连接在网"
"络上。\n"
"\n"
"请打开本地打印机的电源, 这样系统才能自动检测到。同时, 您的网络打印机也必须连"
"接好并打开电源。\n"
"\n"
"注意自动检测网络上的打印机比检测连接在本机的打印机所花时间要长。所以, 如果您"
"不需要, 请关闭对网络打印机或 Windows 打印机的自动检测。\n"
"\n"
"一切准备就绪后请单击“下一步”。如果您不想现在设置打印机, 请单击“取消”。"
#: ../../keyboard.pm:1
#, c-format
msgid "Greek (polytonic)"
msgstr "希腊语(polytonic)"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "格式化分区 %s 之后, 该分区上的所有数据都将丢失"
#: ../../standalone/net_monitor:1
#, c-format
msgid "Connection Time: "
msgstr "连接时间:"
#: ../../standalone/livedrake:1
#, c-format
msgid ""
"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
"请在驱动器中插入安装光盘, 然后单击“确定”。\n"
"如果您没有这张光盘, 请单击“取消”, 放弃在线升级。"
#: ../../standalone/drakperm:1
#, c-format
msgid "Use group id for execution"
msgstr "使用组 ID 执行"
#: ../../any.pm:1
#, c-format
msgid "Choose the default user:"
msgstr "选择默认的用户:"
#: ../../lang.pm:1
#, c-format
msgid "Gabon"
msgstr "加蓬"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Printers on remote CUPS servers do not need to be configured here; these "
"printers will be automatically detected."
msgstr ""
"\n"
"不需要在这里配置远程的 CUPS 服务器上的打印机; 这些打印机会被自动探测到。"
#: ../../any.pm:1
#, c-format
msgid ""
"Mandrake Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr ""
"Mandrake Linux 可以支持多种语言。请选择您想要安装的语言。\n"
"安装完成并重新启动系统后它们就可以使用。"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Directory (or module) to put the backup on this host."
msgstr ""
"将备份放在该主机的目录\n"
"(或模块)。"
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Domain"
msgstr "域"
#: ../../any.pm:1
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "精确的内存大小(找到 %d MB)"
#: ../../help.pm:1
#, c-format
msgid ""
"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
"automated. DrakX will analyze the disk boot sector and act according to\n"
"what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
"boot sector. This way you will be able to load either GNU/Linux or another\n"
"OS.\n"
"\n"
" * if a grub or LILO boot sector is found, it will replace it with a new\n"
"one.\n"
"\n"
"If it cannot make a determination, DrakX will ask you where to place the\n"
"bootloader."
msgstr ""
"LILO 和 grub 都是 GNU/Linux 的启动引导程序。通常情况下, 这一步骤是完全自动\n"
"化的。DrakX 会分析磁盘的引导扇区, 然后执行如下操作：\n"
"\n"
"* 如果发现了 Windows 引导扇区, 则会将其替换为 grub/LILO 引导扇区。这样, 您\n"
"就可以选择装入 GNU/Linux 还是其它的操作系统。\n"
"\n"
"* 如果发现了 grub 或者 LILO 引导扇区, 那么就将其替换为新的引导扇区。\n"
"\n"
"如果无法做出决定的话, DrakX 会询问您将引导程序放在哪里。"
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider dns 2 (optional)"
msgstr "服务商 dns 2(可选)"
#: ../../any.pm:1 ../../help.pm:1
#, c-format
msgid "Boot device"
msgstr "启动设备"
#: ../../install_interactive.pm:1
#, c-format
msgid "Which partition do you want to resize?"
msgstr "您需要改变哪个分区的大小?"
#: ../../lang.pm:1
#, c-format
msgid "United States Minor Outlying Islands"
msgstr "美属本土外岛屿"
#: ../../standalone/logdrake:1
#, c-format
msgid "A tool to monitor your logs"
msgstr "日志监视工具"
#: ../../lang.pm:1
#, c-format
msgid "Djibouti"
msgstr "吉布提"
#: ../../network/netconnect.pm:1
#, c-format
msgid "detected on port %s"
msgstr "检测串口 %s"
#: ../../printer/data.pm:1
#, c-format
msgid "LPD"
msgstr "LPD"
#: ../../Xconfig/various.pm:1
#, c-format
msgid "Graphics card: %s\n"
msgstr "显示卡: %s\n"
#: ../../security/l10n.pm:1
#, c-format
msgid "Accept icmp echo"
msgstr "接受 icmp 回应"
#: ../../bootloader.pm:1
#, c-format
msgid "Yaboot"
msgstr "Yaboot"
#: ../../standalone/drakboot:1
#, c-format
msgid "Splash selection"
msgstr "选择启动画面"
#: ../../partition_table.pm:1
#, c-format
msgid "Extended partition not supported on this platform"
msgstr "这个平台上不支持扩展分区"
#: ../../network/isdn.pm:1
#, c-format
msgid "ISDN Configuration"
msgstr "ISDN 配置"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "high"
msgstr "高"
#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing"
msgstr "共享互联网连接"
#: ../../standalone/logdrake:1
#, c-format
msgid "Choose file"
msgstr "选择文件"
#: ../../network/shorewall.pm:1
#, c-format
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fixes after installation."
msgstr ""
"警告! 发现原来的配置利用了防火墙功能。\n"
"您可能需要在安装之后手工修改。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing/Photo Card Access on \"%s\""
msgstr "“%s”打印机上的打印/照片卡访问"
#: ../../security/l10n.pm:1
#, c-format
msgid "Daily security check"
msgstr "每日安全检查"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Do you want to enable printing on the printers mentioned above or on "
"printers in the local network?\n"
msgstr "您想激活上述打印机的打印功能, 还是要使用本地网络的打印机来打印?\n"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer default settings"
msgstr "打印机默认设置"
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"the WP flag in the CR0 register of the cpu enforce write proctection at the "
"memory page level, thus enabling the processor to prevent unchecked kernel "
"accesses to user memory (aka this is a bug guard)"
msgstr ""
"CPU 中 CRO 寄存器的 WP 标志位强制在内存页面级别进行写保护，这使得处理器可以避"
"免未检查的内核访问用户内存(不过此防护有 bug)"
#: ../../mouse.pm:1
#, c-format
msgid "Generic PS2 Wheel Mouse"
msgstr "普通 PS2 滚轮鼠标"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Removing old printer \"%s\"..."
msgstr "删除旧打印机“%s”..."
#: ../../standalone/harddrake2:1
#, c-format
msgid "Select a device !"
msgstr "请选择设备!"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remove selected server"
msgstr "删除选中的服务器"
#: ../../lang.pm:1
#, c-format
msgid "French Southern Territories"
msgstr "法属南部大城市"
#: ../../standalone/harddrake2:1
#, c-format
msgid "the vendor name of the processor"
msgstr "处理器供应商"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "应该先备份在这个分区上的所有数据"
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Installing package %s"
msgstr "正在安装软件包 %s"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Checking device and configuring HPOJ..."
msgstr "正在检查并配置 HPOJ..."
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr "如果需要更多的分区, 请删除一个主分区以创建扩展分区"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Your printer was configured automatically to give you access to the photo "
"card drives from your PC. Now you can access your photo cards using the "
"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
"\"man mtools\" on the command line for more info). You find the card's file "
"system under the drive letter \"p:\", or subsequent drive letters when you "
"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
"can switch between drive letters with the field at the upper-right corners "
"of the file lists."
msgstr ""
"已经自动配置允许电脑访问您的打印机里面的照片卡驱动器。要访问您的打印机里面的"
"照片卡, 可以使用图形界面程序“MtoolsFM”(菜单:“应用程序”->“文件工具”->“MTools "
"文件管理器”) 或者命令行工具“mtools”(输入“man mtools”命令查看更多信息)。您或在"
"盘符“p:”中发现卡上的文件系统, 如果您有多于一个支持照片卡的 HP 打印机可以查看"
"后续的盘符。在“MtoolsFM”中 您可以在文件列表的右上角切换盘符。"
#: ../../steps.pm:1
#, c-format
msgid "Choose packages to install"
msgstr "选择要安装的软件包"
#: ../../install_interactive.pm:1
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "磁盘 %s 上现存的所有分区及其资料将被清除"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr "您的系统所剩余的空间不够进行安装或升级 (%d > %d)"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Every printer needs a name (for example \"printer\"). The Description and "
"Location fields do not need to be filled in. They are comments for the users."
msgstr ""
"每台打印机需要一个名字(如“printer”)。\n"
"打印机描述和位置是可选项。"
#: ../../help.pm:1
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to setup a new printer. The interface presented there is\n"
"similar to the one used during installation."
msgstr ""
"“%s”：单击“%s”按钮将启动打印机配置向导。请参看“新手指南”中的对\n"
"应部分, 其中包含如何设置新打印机的详细信息。在此显示的界面与安装时的界面十\n"
"分类似。"
#: ../../lang.pm:1
#, c-format
msgid "Bhutan"
msgstr "不丹"
#: ../../standalone/drakgw:1
#, c-format
msgid "Network interface"
msgstr "网卡"
#: ../../standalone/net_monitor:1
#, c-format
msgid "Disconnection from Internet failed."
msgstr "从 Internet 断开连接失败。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Reading printer data..."
msgstr "正在读取打印机数据..."
#: ../../keyboard.pm:1
#, c-format
msgid "Korean keyboard"
msgstr "韩国键盘"
#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
msgid "Not connected"
msgstr "未连接"
#: ../../keyboard.pm:1
#, c-format
msgid "Greek"
msgstr "希腊"
#: ../../lang.pm:1
#, c-format
msgid "Saint Kitts and Nevis"
msgstr "圣基茨和尼维斯"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Transfer successful\n"
"You may want to verify you can login to the server with:\n"
"\n"
"ssh -i %s %s\\@%s\n"
"\n"
"without being prompted for a password."
msgstr ""
"传送成功\n"
"要验证您可以登录到服务器, 请运行:\n"
"\n"
"ssh -i %s %s\\@%s\n"
"\n"
"这样不会提问密码。"
#: ../../any.pm:1
#, c-format
msgid "Enable OF Boot?"
msgstr "启用 OF 启动?"
#: ../../fsedit.pm:1
#, c-format
msgid "You can't use JFS for partitions smaller than 16MB"
msgstr "您不能把 JFS 用于小于 16 MB 的分区"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Erase your RW media (1st Session)"
msgstr "清除您的 RW 介质(第一节)"
#: ../../Xconfig/various.pm:1
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "显示器垂直刷新率: %s\n"
#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Mount point"
msgstr "装载点"
#: ../../Xconfig/test.pm:1
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"发生了错误:\n"
"%s\n"
"试着更改某些参数"
#: ../../standalone/drakperm:1
#, c-format
msgid "User :"
msgstr "用户 :"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore system"
msgstr "恢复系统"
#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"These are the machines on which the locally connected scanner(s) should be "
"available:"
msgstr "下面是本地连接的扫描仪要开放的计算机:"
#: ../../standalone/drakpxe:1
#, c-format
msgid "The DHCP end ip"
msgstr "DHCP 终止 IP"
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Another one"
msgstr "另一个"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Drakbackup"
msgstr "Drakbackup"
#: ../../lang.pm:1
#, c-format
msgid "Colombia"
msgstr "哥伦比亚"
#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Current configuration of `%s':\n"
"\n"
"Network: %s\n"
"IP address: %s\n"
"IP attribution: %s\n"
"Driver: %s"
msgstr ""
"“%s”的当前配置:\n"
"\n"
"网络: %s\n"
"IP 地址: %s\n"
"IP 属性: %s\n"
"其它: %s"
#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Plug'n Play"
msgstr "即插即用"
#: ../../lang.pm:1
#, c-format
msgid "Reunion"
msgstr "留尼旺"
#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Details"
msgstr "细节"
#: ../../network/tools.pm:1
#, c-format
msgid "For security reasons, it will be disconnected now."
msgstr "由于安全原因, 现在将断开连接。"
#: ../../standalone/drakbug:1
#, c-format
msgid "Synchronization tool"
msgstr "同步工具"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Checking your system..."
msgstr "正在检查您的系统..."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print"
msgstr "打印"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Insert the tape with volume label %s\n"
" in the tape drive device %s"
msgstr ""
"请把卷标为 %s 的磁带装进\n"
"磁带机 %s"
#: ../../lang.pm:1
#, c-format
msgid "Mongolia"
msgstr "蒙古"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Mounted\n"
msgstr "已装载\n"
#: ../../help.pm:1
#, c-format
msgid "Graphical Interface"
msgstr "图形界面"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Users"
msgstr "恢复用户文件"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Encryption key for %s"
msgstr "%s 的加密密钥"
#: ../../services.pm:1
#, c-format
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"portmapper 管理各种 RPC 连接, 象 NFS 和 NIS\n"
"这些协议会用到它. 如果您的电脑将要提供利用用 RPC 机制协议的服务\n"
"就必须运行 portmap 服务器。"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Detected hardware"
msgstr "检测到的硬件"
#: ../../lang.pm:1
#, c-format
msgid "Mauritius"
msgstr "毛里求斯"
#: ../../keyboard.pm:1
#, c-format
msgid "Myanmar (Burmese)"
msgstr "缅甸"
#: ../../fs.pm:1
#, c-format
msgid "Enabling swap partition %s"
msgstr "正在启用 swap 分区 %s"
#: ../../install_interactive.pm:1
#, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr "没有 FAT 分区来用作回环(或者没有足够剩余空间)"
#: ../../keyboard.pm:1
#, c-format
msgid "Armenian (old)"
msgstr "美国 (老式)"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""
"名为“%s”的打印机已经在 %s 存在。\n"
"单击“传送”覆盖配置。\n"
"您也可以选择新的名称或跳过该打印机。"
#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
msgid ""
"Find the solutions of your problems via MandrakeSoft's online support "
"platform."
msgstr "MandrakeSoft 的在线支持平台帮助您找到解决问题的方法。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ", host \"%s\", port %s"
msgstr ", 主机“%s”, 端口 %s"
#: ../../lang.pm:1
#, c-format
msgid "Monaco"
msgstr "摩纳哥"
#: ../../security/l10n.pm:1
#, c-format
msgid "Do not send mails when uneeded"
msgstr "不需要时不发送邮件"
#: ../../install_interactive.pm:1
#, c-format
msgid "Partitioning failed: %s"
msgstr "分区失败: %s"
#: ../../fs.pm:1 ../../swap.pm:1
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s 格式化 %s 失败"
#: ../../standalone/drakxtv:1
#, c-format
msgid "Canada (cable)"
msgstr "加拿大 (有线)"
#: ../../help.pm:1
#, c-format
msgid "Upgrade"
msgstr "升级"
#: ../../help.pm:1
#, c-format
msgid "Workstation"
msgstr "工作站"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"正在安装软件包 %s \n"
"%d%%"
#: ../../lang.pm:1
#, c-format
msgid "Kyrgyzstan"
msgstr "吉尔吉斯斯坦"
#: ../../help.pm:1
#, c-format
msgid "With basic documentation"
msgstr "安装基础文档"
#: ../../services.pm:1
#, c-format
msgid "Anacron is a periodic command scheduler."
msgstr "Anacron 一个命令定期调度程序。"
#: ../../install_interactive.pm:1
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"必须指定一个根分区。\n"
"请先创建一个 Linux 分区 (或在图中单击现有的一个)。\n"
"然后在列表里选择“装载点”, 设为“/”。"
#: ../../network/network.pm:1
#, c-format
msgid "Proxy should be http://..."
msgstr "代理服务器应该是象 http://..."
#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "South Africa"
msgstr "南非"
#: ../../lang.pm:1
#, c-format
msgid "Western Sahara"
msgstr "西撒哈拉"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Eject tape after the backup"
msgstr "备份后弹出磁带"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Etherboot Floppy/ISO"
msgstr "Etherboot 软盘/ISO"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Modify printer configuration"
msgstr "修改打印机配置"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose a partition"
msgstr "选择分区"
#: ../../standalone/drakperm:1
#, c-format
msgid "Edit current rule"
msgstr "编辑当前的规则"
#: ../../standalone/drakbackup:1
#, c-format
msgid "%s"
msgstr "%s"
#: ../../mouse.pm:1
#, c-format
msgid "Please test the mouse"
msgstr "请测试您的鼠标"
#: ../../fs.pm:1
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""
"不在此文件系统更新 inode 访问次数\n"
"(例如，为了加速对新闻服务器的新闻池的访问)"
#: ../../standalone/drakperm:1
#, c-format
msgid "Sticky-bit"
msgstr "Sticky-bit"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Other Media"
msgstr "其它介质"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup system files"
msgstr "备份系统文件"
#: ../../mouse.pm:1
#, c-format
msgid "Logitech MouseMan+"
msgstr "罗技 MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Sector"
msgstr "扇区"
#: ../../lang.pm:1
#, c-format
msgid "Qatar"
msgstr "卡塔尔"
#: ../../any.pm:1
#, c-format
msgid "LDAP Base dn"
msgstr "LDAP 基 DN"
#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
"You can't select this package as there is not enough space left to install it"
msgstr "您不可以选择这个软件包。 没有足够空间安装它。"
#: ../../help.pm:1
#, c-format
msgid "generate auto-install floppy"
msgstr "生成自动安装软盘"
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Dialing mode"
msgstr "拨号模式"
#: ../../services.pm:1
#, c-format
msgid "File sharing"
msgstr "文件共享"
#: ../../any.pm:1
#, c-format
msgid "Clean /tmp at each boot"
msgstr "每次启动时清除 /tmp"
#: ../../lang.pm:1
#, c-format
msgid "Malawi"
msgstr "马拉维"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "local config: false"
msgstr "本机配置: 假"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please choose your type of mouse."
msgstr "请选择您的鼠标类型。"
#: ../../standalone/harddrake2:1
#, c-format
msgid "class of hardware device"
msgstr "硬件设备的分类"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"These are the machines and networks on which the locally connected printer"
"(s) should be available:"
msgstr "下面是本地连接的打印机要共享的计算机和网络:"
#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "United Kingdom"
msgstr "英国"
#: ../../services.pm:1
#, c-format
msgid "running"
msgstr "运行"
#: ../../standalone/draksec:1
#, c-format
msgid "default"
msgstr "默认"
#: ../../lang.pm:1
#, c-format
msgid "Indonesia"
msgstr "印度尼西亚"
#: ../../standalone/drakxtv:1
#, c-format
msgid "France [SECAM]"
msgstr "法国 [SECAM]"
#: ../../any.pm:1
#, c-format
msgid "restrict"
msgstr "限制"
#: ../../pkgs.pm:1
#, c-format
msgid "must have"
msgstr "必须拥有"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"CUPS does not support printers on Novell servers or printers sending the "
"data into a free-formed command.\n"
msgstr "CUPS不支持Novell服务器上的打印机及发送数据到无格式命令的打印机。\n"
#: ../../lang.pm:1
#, c-format
msgid "Senegal"
msgstr "塞纳加尔"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Command line"
msgstr "命令行"
#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
"Our full range of Linux solutions, as well as special offers on products and "
"other \"goodies\", are available on our e-store:"
msgstr ""
"全套的 Linux 解决方案, 各种特别促销的产品和好玩意儿, 就在我们的在线商店:"
#: ../../any.pm:1
#, c-format
msgid "access to administrative files"
msgstr "允许访问系统设置文件"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Error during sendmail.\n"
" Your report mail was not sent.\n"
" Please configure sendmail"
msgstr ""
"使用 sendmail 出错\n"
" 您的报告邮件没有发出。\n"
" 请配置 sendmail"
#: ../../fs.pm:1
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""
"不允许 set-user-identifier 或 set-group-identifier 位生效。\n"
"(这可能比较安全, 如果您安装了 suidperl(1) 则不太安全。)"
#: ../../lang.pm:1
#, c-format
msgid "Montserrat"
msgstr "蒙特塞拉特"
#: ../../help.pm:1
#, c-format
msgid "Automatic dependencies"
msgstr "自动依赖性"
#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Swap"
msgstr "交换"
#: ../../standalone/drakperm:1
#, c-format
msgid "Custom settings"
msgstr "自定义设置"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Other"
msgstr "恢复其它文件"
#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "TV card"
msgstr "电视卡"
#: ../../printer/main.pm:1
#, c-format
msgid "Printer on SMB/Windows 95/98/NT server"
msgstr "SMB/Windows 95/98/NT 服务器上的打印机"
#: ../../standalone/scannerdrake:1
#, c-format
msgid ", "
msgstr ", "
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remove selected host/network"
msgstr "删除选中的主机/网络"
#: ../../services.pm:1
#, c-format
msgid ""
"Postfix is a Mail Transport Agent, which is the program that moves mail from "
"one machine to another."
msgstr ""
"Postfix 是一个邮件传递代理, 这个程序帮助您把电子邮件从\n"
"一台机器送到另一台。"
#: ../../keyboard.pm:1
#, c-format
msgid "Uzbek (cyrillic)"
msgstr "乌兹别克 (西里尔)"
#: ../../keyboard.pm:1
#, c-format
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""
"请您选择使用哪个按键或按键组合 \n"
"来在不同的键盘布局之间切换\n"
"(例如, 英文和中文)"
#: ../../network/network.pm:1
#, c-format
msgid "Network Hotplugging"
msgstr "网络热插拔"
#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, reports check result to tty."
msgstr "如果设为 yes, 就会给 tty 报告检测结果。"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore From CD"
msgstr "从光盘恢复"
#: ../../standalone/drakgw:1
#, c-format
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
"this computer's Internet connection.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"现在将要配置您电脑上的互联网连接与其它电脑共享。\n"
"使用此特性, 局域网上的其它计算机都将可以使用本机上的因特网连接。\n"
"\n"
"请确定在继续操作之前已经使用 drakconnect 配置了您的网络/互联网访问。\n"
"\n"
"注意: 您另外需要一片专用的网卡设置局域网(LAN)。"
#: ../../network/ethernet.pm:1
#, c-format
msgid ""
"Please choose which network adapter you want to use to connect to Internet."
msgstr "请选择用哪个网卡连接互联网。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Photo memory card access on your HP multi-function device"
msgstr "您的惠普一体机的照片存储卡访问"
#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
msgid ""
"Enhance your computer performance with the help of a selection of partners "
"offering professional solutions compatible with Mandrake Linux"
msgstr ""
"我们为您精选的合作伙伴可提供与 Mandrake Linux 兼容的专业解决方案, 激发计算机"
"的无限潜能"
#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing is now disabled."
msgstr "Internet 连接共享现在被禁用了。"
#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, verify checksum of the suid/sgid files."
msgstr "如果设为 yes, 就会校验 suid/sgid 文件的校验和。"
#: ../../keyboard.pm:1
#, c-format
msgid "Latin American"
msgstr "拉美键盘"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Japanese text printing mode"
msgstr "日文文本打印模式"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Old device file"
msgstr "旧的设备文件"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Info: "
msgstr "信息: "
#: ../../interactive/stdio.pm:1
#, c-format
msgid "Button `%s': %s"
msgstr "按钮“%s”: %s"
#: ../../any.pm:1 ../../interactive.pm:1 ../../harddrake/sound.pm:1
#: ../../standalone/drakbug:1 ../../standalone/drakconnect:1
#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
#: ../../standalone/service_harddrake:1
#, c-format
msgid "Please wait"
msgstr "请稍候"
#: ../../mouse.pm:1
#, c-format
msgid "Genius NetMouse"
msgstr "Genius NetMouse"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "None"
msgstr "无"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The entered IP is not correct.\n"
msgstr "输入的 IP 不正确。\n"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Ethernet Card"
msgstr "以太网卡"
#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Info"
msgstr "信息"
#: ../../help.pm:1 ../../install_steps_gtk.pm:1
#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Install"
msgstr "安装"
#: ../../help.pm:1
#, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to stop this operation without losing any data and\n"
"partitions present on this hard drive."
msgstr ""
"如果您想要删除此硬盘上的所有数据和分区, 请单击“%s”。\n"
"注意, 单击“%s”后, 您将无法恢复此硬盘上的任何数据或分区(包括\n"
"任何 Windows 数据)。\n"
"单击“%s”可以停止此操作, 此硬盘上的任何数据或分区不会丢失。"
#: ../../steps.pm:1
#, c-format
msgid "Exit install"
msgstr "退出安装"
#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP)."
msgstr ""
"所有配置都完成了。\n"
"您现在可以利用自动网络设置(DHCP)让您的局域网上其它的电脑共享您的互联网连接"
"了。"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Remote CUPS server"
msgstr "远程 CUPS 服务器"
#: ../../mouse.pm:1
#, c-format
msgid "Sun - Mouse"
msgstr "Sun - 鼠标"
#: ../../standalone/drakgw:1
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""
"您的系统中只配置了一个网卡:\n"
"\n"
"%s\n"
"\n"
"对这块网卡配置您的局域网。"
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Minimal install"
msgstr "最小安装"
#: ../../lang.pm:1
#, c-format
msgid "Ethiopia"
msgstr "埃塞俄比亚"
#: ../../security/l10n.pm:1
#, c-format
msgid "Enable \"crontab\" and \"at\" for users"
msgstr "启用用户的“crontab”和“at”"
#: ../../keyboard.pm:1
#, c-format
msgid "Devanagari"
msgstr "梵文"
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"- pci devices: this gives the PCI slot, device and function of this card\n"
"- eide devices: the device is either a slave or a master device\n"
"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""
"- pci 设备: 列出 PCI 插槽, 设备和功能\n"
"- eide 设备: 主设备或从设备\n"
"- scsi 设备: 列出 scsi 总线和 scsi 设备号"
#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Total size: %d / %d MB"
msgstr "总共大小: %d / %d MB"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "disabled"
msgstr "已禁用"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Search for new scanners"
msgstr "搜索新扫描仪"
#: ../../standalone/drakgw:1
#, c-format
msgid "Disabling servers..."
msgstr "正在禁用服务器..."
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Please choose the time \n"
"interval between each backup"
msgstr "请选择您希望备份时间间隔"
#: ../../standalone/drakboot:1
#, c-format
msgid "Installation of %s failed. The following error occured:"
msgstr "安装 %s 失败, 出现下列错误:"
#: ../../standalone/drakboot:1
#, c-format
msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
msgstr "无法打开 mkinitrd -f /boot/initrd-%s.img %s。"
#: ../../install_any.pm:1
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They don't have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
"您选择了以下服务程序：%s\n"
"\n"
"\n"
"这些服务默认会被激活。它们没有已知的安全问题, 但可能发现新问题。\n"
"如果那样, 您一定要立即升级。\n"
"\n"
"\n"
"您真要安装这些服务?\n"
#: ../../printer/main.pm:1
#, c-format
msgid "Network printer (TCP/Socket)"
msgstr "网络打印机 (TCP/Socket)"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup User files..."
msgstr "备份用户文件..."
#: ../../steps.pm:1
#, c-format
msgid "Install system"
msgstr "安装系统"
#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "First DNS Server (optional)"
msgstr "首选 DNS 服务器(可选)"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Alternatively, you can specify a device name/file name in the input line"
msgstr "或者, 您可以在输入行指定一个设备名/文件名"
#: ../../security/help.pm:1
#, c-format
msgid ""
"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
"symlink /etc/security/msec/server to point to\n"
"/etc/security/msec/server.<SERVER_LEVEL>.\n"
"\n"
"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
"add a service if it is present in the file during the installation of\n"
"packages."
msgstr ""
"如果 /etc/security/msec/security.conf 中的 SERVER_LEVEL(若不存在就是\n"
"SECURE_LEVEL)大于 3 的话, 就创建指向 /etc/security/msec/server."
"<SERVER_LEVEL>\n"
"的符号链接 /etc/security/msec/server。\n"
"\n"
"chkconfig --add 会使用 /etc/security/msec/server来决定在安装包中出现文\n"
"件时, 决定是否要添加服务。"
#: ../../keyboard.pm:1
#, c-format
msgid "Russian (Phonetic)"
msgstr "俄语 (音标)"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "dhcpd Config..."
msgstr "DHCPD 配置..."
#: ../../standalone/drakgw:1
#, c-format
msgid "The setup has already been done, but it's currently disabled."
msgstr "配置已经完成。它当前已经被禁用。"
#: ../../any.pm:1
#, c-format
msgid "LILO/grub Installation"
msgstr "LILO/grub 安装"
#: ../../keyboard.pm:1
#, c-format
msgid "Israeli"
msgstr "以色列"
#: ../../standalone/logdrake:1
#, c-format
msgid "load setting"
msgstr "装入配置"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer \"%s\" on server \"%s\""
msgstr "打印机“%s”在服务器“%s”上"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Floppy can be removed now"
msgstr "现在可以取出软盘了"
#: ../../help.pm:1
#, c-format
msgid "Truly minimal install"
msgstr "真正的最小安装"
#: ../../lang.pm:1
#, c-format
msgid "Denmark"
msgstr "丹麦"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Moving partition..."
msgstr "正在移动分区..."
#: ../../standalone/drakgw:1
#, c-format
msgid "(This) DHCP Server IP"
msgstr "(此)DHCP 服务器 IP"
#: ../../Xconfig/test.pm:1
#, c-format
msgid "Test of the configuration"
msgstr "测试配置"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing %s ..."
msgstr "正在安装 %s..."
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"If you told the installer that you wanted to individually select packages,\n"
"it will present a tree containing all packages classified by groups and\n"
"subgroups. While browsing the tree, you can select entire groups,\n"
"subgroups, or individual packages.\n"
"\n"
"Whenever you select a package on the tree, a description appears on the\n"
"right to let you know the purpose of the package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you will be asked to confirm that you really want those servers to be\n"
"installed. By default Mandrake Linux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that that\n"
"security holes were discovered after this version of Mandrake Linux was\n"
"finalized. If you do not know what a particular service is supposed to do\n"
"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
"install the listed services and they will be started automatically by\n"
"default during boot. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages have relationships between each other such\n"
"that installation of a package requires that some other program is also\n"
"rerquired to be installed. The installer can determine which packages are\n"
"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert a floppy disk previously created at the\n"
"end of another installation. See the second tip of last step on how to\n"
"create such a floppy."
msgstr ""
"如果您告诉安装程序, 您想要单独选择软件包, 现在就会出现一棵树, 其中按组和小\n"
"组进行分类, 列出了所有软件包。浏览树的时候, 您可以选择整个组、小组或者单个\n"
"软件包。\n"
"\n"
"当您在树中选择一个软件包时, 右侧将会出现它的说明。\n"
"\n"
"!! 如果您选择了服务器软件包, 不管是指定了单个软件包, 还是因为它是属于某个\n"
"组, 安装程序都会请您确认是否真的想要安装这些服务器。默认情况下, Mandrake\n"
"Linux 将会在启动的时候自动启动所有已安装的服务。就算在此发行版本推出时这些\n"
"服务是安全的, 也没有任何已知的问题, 在此版本完成之后也很有可能发现这些程序\n"
"的安全漏洞。如果您不知道特定服务是干什么用的, 或者为什么要安装该服务, 请单\n"
"击“否”。单击“是”将会安装列出的服务, 从而这些服务将会在启动时候被自动启\n"
"动。!!\n"
"\n"
"“自动依赖性”选项在安装程序自动选择需要的软件包时不会提出警告。某些软件包\n"
"之间存在着依赖关系, 一个软件包的安装可能需要已经安装其它软件包。安装程序会\n"
"自动决定要成功完成安装所需的软件包依赖关系。\n"
"\n"
"列表底部的小软盘图标允许您装入上次安装时创建的软件包列表。如果您需要为多台\n"
"计算机执行相同的配置, 那么此选项将非常有用。单击此图标后, 程序将会要求您插\n"
"入上次安装结束时创建的软盘。请参看最后一步的第二个提示, 其中描述了如何创建\n"
"这样的软盘。"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "请选择该文件系统的加密密钥"
#: ../../lang.pm:1
#, c-format
msgid "Sierra Leone"
msgstr "塞拉利昂"
#: ../../lang.pm:1
#, c-format
msgid "Andorra"
msgstr "安道尔"
#: ../../lang.pm:1
#, c-format
msgid "Botswana"
msgstr "博茨瓦纳"
#: ../../standalone/draksec:1
#, c-format
msgid "(default value: %s)"
msgstr "(默认值: %s)"
#: ../../security/help.pm:1
#, c-format
msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
msgstr "将密码年龄设置为“max”天, 将延迟更改为“inactive”。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Alternative test page (Letter)"
msgstr "可换测试页(信纸)"
#: ../../standalone/drakgw:1
#, c-format
msgid ""
"DHCP Server Configuration.\n"
"\n"
"Here you can select different options for the DHCP server configuration.\n"
"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
msgstr ""
"DHCP 服务器配置。\n"
"\n"
"在此您可以选择 DHCP 服务器配置的不同选项。\n"
"如果您不知道选项的含义, 那么就不必进行修改。\n"
"\n"
#: ../../Xconfig/card.pm:1
#, c-format
msgid "Choose an X server"
msgstr "请选择 X 服务器"
#: ../../install_interactive.pm:1
#, c-format
msgid "Swap partition size in MB: "
msgstr "交换分区大小 (MB): "
#: ../../standalone/drakbackup:1
#, c-format
msgid "No changes to backup!"
msgstr "没有需要备份的修改!"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Formatted\n"
msgstr "已格式化\n"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Type of install"
msgstr "安装类型"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr "打印机 “%s” 在 SMB/Windows 服务器打印机 “%s” 上"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Daemon (%s) include:\n"
msgstr ""
"\n"
"- Daemon (%s) include:\n"
#: ../../modules/parameters.pm:1
#, c-format
msgid "%d comma separated numbers"
msgstr "%d 逗号分隔的数字"
#: ../../services.pm:1
#, c-format
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr "rusers 协议允许网络上的用户确认在其它作出应答的机器上有哪些用户登录。"
#: ../../standalone/drakautoinst:1
#, c-format
msgid "Automatic Steps Configuration"
msgstr "自动步骤配置"
#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
"Want to know more and to contribute to the Open Source community? Get "
"involved in the Free Software world!"
msgstr "想更多了解开放源代码社团? 加入自由软件的世界"
#: ../../lang.pm:1
#, c-format
msgid "Barbados"
msgstr "巴巴多斯"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Please select data to backup..."
msgstr "请选择需备份的数据..."
#: ../../standalone/net_monitor:1
#, c-format
msgid ""
"Connection failed.\n"
"Verify your configuration in the Mandrake Control Center."
msgstr ""
"连接失败。\n"
"请在 Mandrake 控制中心中检查您的配置。"
#: ../../standalone/net_monitor:1
#, c-format
msgid "received"
msgstr "已接收"
#: ../../security/l10n.pm:1
#, c-format
msgid "Enable su only from the wheel group members or for any user"
msgstr "只对轮组成员启用 su 或允许任何用户 su。"
#: ../../standalone/logdrake:1
#, c-format
msgid "/File/_New"
msgstr "/文件(F)/新建(_N)"
#: ../../standalone/drakgw:1
#, c-format
msgid "The DNS Server IP"
msgstr "DNS 服务器 IP"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "IP Range End:"
msgstr "IP 范围终点:"
#: ../../security/level.pm:1
#, c-format
msgid "High"
msgstr "高"
#: ../../any.pm:1
#, c-format
msgid "NoVideo"
msgstr "无视频"
#: ../../standalone/harddrake2:1
#, c-format
msgid "this field describes the device"
msgstr "此处描述了设备"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
msgstr "添加打印机到 Star Office/OpenOffice.org/GIMP"
#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Local Printers"
msgstr "本机打印机"
#: ../../standalone/drakpxe:1
#, c-format
msgid "Installation image directory"
msgstr "安装映像目录"
#: ../../any.pm:1
#, c-format
msgid "NIS Server"
msgstr "NIS 服务器"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Port: %s"
msgstr "端口: %s"
#: ../../lang.pm:1
#, c-format
msgid "Spain"
msgstr "西班牙"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "local config: %s"
msgstr "本地配置: %s"
#: ../../any.pm:1
#, c-format
msgid "This user name has already been added"
msgstr "该用户名已经存在"
#: ../../interactive.pm:1
#, c-format
msgid "Choose a file"
msgstr "选择文件"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Apply"
msgstr "应用"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Auto-detect available ports"
msgstr "自动检测可用的端口"
#: ../../lang.pm:1
#, c-format
msgid "San Marino"
msgstr "圣马力诺"
#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing currently disabled"
msgstr "互联网连接共享现在被禁用"
#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "Belgium"
msgstr "比利时"
#: ../../lang.pm:1
#, c-format
msgid "Kuwait"
msgstr "科威特"
#: ../../any.pm:1
#, c-format
msgid "Choose the window manager to run:"
msgstr "选择要运行的窗口管理程序："
#: ../../standalone/harddrake2:1
#, c-format
msgid "sub generation of the cpu"
msgstr "CPU 的次世代"
#: ../../standalone/drakbug:1
#, c-format
msgid "First Time Wizard"
msgstr "初次使用向导"
#: ../../install_steps.pm:1
#, c-format
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"发生错误, 可是我不知道该怎样处理才好。\n"
"继续下去会怎样就看您的运气了。"
#: ../../lang.pm:1
#, c-format
msgid "Taiwan"
msgstr "中国台湾"
#: ../../lang.pm:1
#, c-format
msgid "Pakistan"
msgstr "巴基斯坦"
#: ../../standalone/logdrake:1
#, c-format
msgid "please wait, parsing file: %s"
msgstr "请等待, 正在分析文件: %s"
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Importance: "
msgstr "重要性: "
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To be able to print with your Lexmark inkjet and this configuration, you "
"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
"\"Linux\" as operating system. The drivers come as RPM packages or shell "
"scripts with interactive graphical installation. You do not need to do this "
"configuration by the graphical frontends. Cancel directly after the license "
"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
"adjust the head alignment settings with this program."
msgstr ""
"要配置利盟喷墨打印机需要从利盟网站(http://www.lexmark.com/)下载喷墨打印机驱动"
"程序。单击“Drivers”链接. 然后挑选您的型号并选择“Linux”操作系统。驱动程序的形"
"式有 RPM 包或带有互动式图形界面的脚本程序。如果您使用这个配置工具, 就不必使用"
"图形界面的安装程序。在许可协议之后直接按取消。用“lexmarkmaintain”命令打印喷头"
"对齐测试页, 然后用这个程序调节喷头对齐。"
#: ../../standalone/drakperm:1
#, c-format
msgid "Permissions"
msgstr "权限"
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider name (ex provider.net)"
msgstr "服务商名称 (如 provider.net)"
#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandrake Linux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"您的系统资源不足。您在安装 Mandrake Linux 时可能遇到问题。\n"
"如果这样, 您可以尝试文本模式的安装。\n"
"在从光盘启动后按“F1”键, 然后输入 'text'。"
#: ../../install_interactive.pm:1
#, c-format
msgid "Use the Windows partition for loopback"
msgstr "利用 Windows 分区进行回送"
#: ../../keyboard.pm:1
#, c-format
msgid "Armenian (typewriter)"
msgstr "美国 (打字机)"
#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
msgid "Connection type: "
msgstr "连接类型: "
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Graphical interface"
msgstr "图形界面"
#: ../../lang.pm:1
#, c-format
msgid "Chad"
msgstr "乍得"
#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
msgid "XFree %s with 3D hardware acceleration"
msgstr "XFree %s 带有硬件 3D 加速的支持"
#: ../../lang.pm:1
#, c-format
msgid "India"
msgstr "印度"
#: ../../lang.pm:1
#, c-format
msgid "Slovakia"
msgstr "斯洛伐克"
#: ../../lang.pm:1
#, c-format
msgid "Singapore"
msgstr "新加坡"
#: ../../lang.pm:1
#, c-format
msgid "Cambodia"
msgstr "柬埔寨"
#: ../../Xconfig/various.pm:1
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "显示器水平刷新率: %s\n"
#: ../../standalone/drakperm:1
#, c-format
msgid "Path"
msgstr "路径"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Here you can specify any arbitrary command line into which the job should be "
"piped instead of being sent directly to a printer."
msgstr ""
"您可在此指定任意的命令行, 打印任务将通过该命令行构成的管道再送到打印机。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printing system (%s) will not be started automatically when the machine "
"is booted.\n"
"\n"
"It is possible that the automatic starting was turned off by changing to a "
"higher security level, because the printing system is a potential point for "
"attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing system turned on "
"again?"
msgstr ""
"打印系统(%s) 开机时不会自动启动。\n"
"\n"
"您希望让打印系统自动启动吗?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Printer %s\n"
"What do you want to modify on this printer?"
msgstr ""
"打印机 %s\n"
"要修改吗?"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Add host"
msgstr "添加主机"
#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
"如果您明确知道您的卡需要哪个驱动程序\n"
"您可以从上面的列表中选择正确的名字。\n"
"\n"
"当前为您的声卡“%s”使用的是“%s”驱动程序 "
#: ../../any.pm:1
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
"您愿意让用户能共享他们的目录吗?\n"
"在这里选择允许, 用户将可以在 KDE 和 Gnome 的文件管理器中单击“共享”菜单项\n"
"“定制”允许按照不同用户细分设置。\n"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Please choose load or save package selection on floppy.\n"
"The format is the same as auto_install generated floppies."
msgstr ""
"请选择用软盘载入或保存软件包选择信息。\n"
"格式与自动安装生成的软盘一样。"
#: ../../standalone/drakxtv:1
#, c-format
msgid "China (broadcast)"
msgstr "中国 (广播)"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Use quota for backup files."
msgstr "使用限额备份文件."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configuring printer \"%s\"..."
msgstr "正在配置打印机“%s”..."
#: ../../fs.pm:1
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""
"不允许在装载的文件系统上执行任何二进制文件。\n"
"此选项对于特定服务器可能非常有用，比如服务器所包含的文件系统中包含其它\n"
"架构的二进制文件。"
#: ../../network/netconnect.pm:1
#, c-format
msgid "Internet connection"
msgstr "Internet 连接"
#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"模块 %s 加载失败。\n"
"您要尝试其它的参数吗?"
#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid "Welcome to the Open Source world."
msgstr "欢迎进入开放源代码世界。"
# ../drakfw_.c:
#: ../../lang.pm:1
#, c-format
msgid "Bosnia and Herzegovina"
msgstr "波黑"
#: ../../fsedit.pm:1
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr "这个加载点需要一个真正的文件系统(ext2/ext3、reiserfs、xfs 或 jfs)\n"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "You must enter a host name or an IP address.\n"
msgstr "您必须输入主机名或 IP 地址。\n"
#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "Netherlands"
msgstr "荷兰"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Sending files by FTP"
msgstr "通过 FTP 发送文件"
#: ../../network/isdn.pm:1
#, c-format
msgid "Internal ISDN card"
msgstr "内置 ISDN 卡"
#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr "没有已知的 OSS/ALSA 替代驱动程序可以用在您的声卡 (%s) 上, 现正使用“%s”"
#: ../../network/modem.pm:1
#, c-format
msgid "Title"
msgstr "标题"
#: ../../standalone/drakfont:1
#, c-format
msgid "Install & convert Fonts"
msgstr "安装并转换字体"
#: ../../standalone/drakbackup:1
#, c-format
msgid "WARNING"
msgstr "警告"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Installing bootloader"
msgstr "安装引导程序"
#: ../../standalone/drakautoinst:1
#, c-format
msgid "replay"
msgstr "重放"
#: ../../network/netconnect.pm:1
#, c-format
msgid "detected %s"
msgstr "检测到 %s"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Expect is an extension to the Tcl scripting language that allows interactive "
"sessions without user intervention."
msgstr ""
#: ../../lang.pm:1
#, c-format
msgid "Virgin Islands (U.S.)"
msgstr "美属维京群岛"
#: ../../partition_table.pm:1
#, c-format
msgid "Bad backup file"
msgstr "错误的备份文件"
#: ../../standalone/drakgw:1
#, c-format
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"互联网连接共享的设定已经完成。\n"
"它当前已经被禁用。\n"
"\n"
"您要做什么?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Enter IP address and port of the host whose printers you want to use."
msgstr "请输入您想使用的打印机所在主机的 IP 地址和端口。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Pipe into command"
msgstr "管道命令"
#: ../../install_interactive.pm:1
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"您系统中的部分硬件需要“专有”的驱动程序才能工作。\n"
"有关它们的情况, 请您查看: %s"
#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Detecting devices..."
msgstr "正在检测设备..."
#: ../../lang.pm:1
#, c-format
msgid "Haiti"
msgstr "海地"
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Description of the fields:\n"
"\n"
msgstr ""
"各个字段的描述:\n"
"\n"
#: ../../standalone/draksec:1
#, c-format
msgid "Basic options"
msgstr "基本选项"
#: ../../standalone/harddrake2:1
#, c-format
msgid "the name of the CPU"
msgstr "CPU 名称"
#: ../../security/l10n.pm:1
#, c-format
msgid "Accept bogus IPv4 error messages"
msgstr "接受 bogus IPv4 错误消息"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Refreshing printer data..."
msgstr "正在刷新打印机数据..."
#: ../../install2.pm:1
#, c-format
msgid "You must also format %s"
msgstr "您还必须格式化 %s"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "小心: 该操作有危险。"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Insert a floppy containing package selection"
msgstr "请插入包含软件包选择的软盘"
#: ../../diskdrake/dav.pm:1
#, c-format
msgid "Server: "
msgstr "服务器:"
#: ../../standalone/draksec:1
#, c-format
msgid "Security Alerts:"
msgstr "安全警告:"
#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Sweden"
msgstr "瑞典"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Use Expect for SSH"
msgstr "把 Expect 用于 SSH"
#: ../../lang.pm:1
#, c-format
msgid "Poland"
msgstr "波兰"
#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Other ports"
msgstr "其它端口"
#: ../../harddrake/v4l.pm:1
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr "用于 mmap 捕获的缓冲区数量"
#: ../../harddrake/data.pm:1
#, c-format
msgid "SMBus controllers"
msgstr "SMBus 控制器"
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Connection timeout (in sec)"
msgstr "连接超时(秒)"
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Some of the early i486DX-100 chips cannot reliably return to operating mode "
"after the \"halt\" instruction is used"
msgstr "某些早期的 i486DX-100 芯片在使用“halt”指令后无法确定返回操作模式"
#: ../../keyboard.pm:1
#, c-format
msgid "Croatian"
msgstr "克罗地亚"
#: ../../help.pm:1
#, c-format
msgid "Use existing partition"
msgstr "使用已有分区"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Unable to contact mirror %s"
msgstr "无法连接镜像 %s"
#: ../../standalone/logdrake:1
#, c-format
msgid "/Help/_About..."
msgstr "/帮助(H)/关于(_A)..."
#: ../../standalone/drakbackup:1
#, c-format
msgid "Remove user directories before restore."
msgstr "恢复前删除用户目录。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are going to configure a remote printer. This needs working network "
"access, but your network is not configured yet. If you go on without network "
"configuration, you will not be able to use the printer which you are "
"configuring now. How do you want to proceed?"
msgstr ""
"您在配置远程打印机。配置远程打印需要网络访问,\n"
"但您还没有配置网络。继续吗?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "CUPS printer configuration"
msgstr "CUPS 打印机配置"
#: ../../standalone/drakfont:1
#, c-format
msgid "could not find any font in your mounted partitions"
msgstr "在分区中找不到任何字体"
#: ../../standalone/harddrake2:1
#, c-format
msgid "F00f bug"
msgstr "F00f 错误"
#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
msgid "XFree %s"
msgstr "XFree %s"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Domain Name:"
msgstr "域名:"
#: ../../security/l10n.pm:1
#, c-format
msgid "Root umask"
msgstr "Root umask"
#: ../../any.pm:1
#, c-format
msgid "On Floppy"
msgstr "在软盘上"
#: ../../security/l10n.pm:1
#, c-format
msgid "Reboot by the console user"
msgstr "控制台用户可重新启动"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore"
msgstr "恢复"
#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr "如果设为 yes, 就会检查网络设备是否工作在混乱状态下。"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Looking for available packages..."
msgstr "正在寻找可安装的程序..."
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"This should be a comma-seperated list of local users or email addresses that "
"you want the backup results sent to. You will need a functioning mail "
"transfer agent setup on your system."
msgstr ""
#: ../../any.pm:1
#, c-format
msgid "Init Message"
msgstr "初始信息"
#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Rescue partition table"
msgstr "抢救分区表"
#: ../../standalone/net_monitor:1
#, c-format
msgid "Connection complete."
msgstr "连接完成。"
#: ../../lang.pm:1
#, c-format
msgid "Cyprus"
msgstr "塞浦路斯"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Remove from RAID"
msgstr "从 RAID 中移出"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr "这个加密密钥太简单了 (至少要有 %d 个字符)"
#: ../../standalone/drakbug:1
#, c-format
msgid "Configuration Wizards"
msgstr "配置向导"
#: ../../network/netconnect.pm:1
#, c-format
msgid "ISDN connection"
msgstr "ISDN 连接"
#: ../../standalone/harddrake2:1
#, c-format
msgid "primary"
msgstr "主"
#: ../../printer/main.pm:1
#, c-format
msgid " on SMB/Windows server \"%s\", share \"%s\""
msgstr "SMB/Windows 服务器“%s”上的共享“%s”"
#: ../../help.pm:1
#, c-format
msgid ""
"This dialog is used to choose which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all the services available on the current installation.\n"
"Review each one carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you are not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you will probably not want to start any services that you do not\n"
"need. Please remember that several services can be dangerous if they are\n"
"enabled on a server. In general, select only the services you really need.\n"
"!!"
msgstr ""
"此对话框可让您选择启动时要启动哪些服务。\n"
"\n"
"DrakX 将会列出本次安装所有可用的服务。请仔细检查, 并且去掉那些在启动时不总\n"
"需要的服务。\n"
"\n"
"移动您的鼠标到选项上面会弹出帮助提示, 解释这个服务的作用。不过, 如果您不确\n"
"定某一个服务到底是否需要, 还是保留默认设置会比较安全。\n"
"\n"
"!! 如果您的机器将作为服务器, 在这一步请格外小心: 请不要启动任何您不需要的\n"
"服务。请不要忘了, 某些服务对服务器有潜在的危险。通常, 只选择您确实要使用的\n"
"那些服务。!!"
#: ../../lang.pm:1
#, c-format
msgid "Niue"
msgstr "纽埃"
#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Skip"
msgstr "跳过"
#: ../../services.pm:1
#, c-format
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"激活/禁止所有配置为开机就启动的\n"
"网络接口。"
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"the CPU frequency in MHz (Megahertz which in first approximation may be "
"coarsely assimilated to number of instructions the cpu is able to execute "
"per second)"
msgstr ""
"以 MHz 为单位的 CPU 频率(初次估计的兆赫兹可能比较接近 CPU 每秒可执行的指令数)"
#: ../../pkgs.pm:1
#, c-format
msgid "important"
msgstr "重要"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Total Progress"
msgstr "总进展"
#: ../../help.pm:1
#, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
"DrakX 将会首先检测您系统中所安装的 IDE 设备。它还会搜索您系统中所有的 PCI\n"
"SCSI 适配卡。如果 DrakX 发现了 SCSI 适配卡, 它会自动安装合适的驱动程序。\n"
"\n"
"由于硬件检测并不总是可信的, DrakX 可能无法检测到您的硬盘驱动器。如果是这样\n"
"的话, 您就需要手动指定您的硬件。\n"
"\n"
"\n"
"如果您需要手动指定 PCI SCSI 适配卡, DrakX 将提问您是否要指定特别的参数。您\n"
"最好让 DrakX 去检测硬件, 这样有助于获得初始化适配卡所需的选项。在大多数情况\n"
"下, DrakX 将会顺利通过这一步。\n"
"\n"
"如果 DrakX 无法检测到适当的参数, 就只好劳驾您亲自配置驱动程序了。"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Users"
msgstr "用户"
#: ../../lang.pm:1
#, c-format
msgid "Aruba"
msgstr "阿鲁巴"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Preparing bootloader..."
msgstr "正在准备引导程序..."
#: ../../network/network.pm:1
#, c-format
msgid "Gateway (e.g. %s)"
msgstr "网关 (如 %s )"
#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "The passwords do not match"
msgstr "两次密码不符"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Examples for correct IPs:\n"
msgstr "正确 IP 地址的例子:\n"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Frequency (MHz)"
msgstr "频率 (MHz)"
#: ../../install_any.pm:1
#, c-format
msgid ""
"To use this saved packages selection, boot installation with ``linux "
"defcfg=floppy''"
msgstr "使用保存的软件包选择, 以“linux defcfg=floppy”启动"
#: ../../standalone/harddrake2:1
#, c-format
msgid "the number of the processor"
msgstr "处理器编号"
#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Hardware clock set to GMT"
msgstr "您的系统时钟设定为 GMT"
#: ../../network/isdn.pm:1
#, c-format
msgid "Do you want to start a new configuration ?"
msgstr "您想要开始新配置吗?"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Give a file name"
msgstr "给一个文件名"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Please choose the port that your printer is connected to."
msgstr "请问您的打印机是连接到那个端口?"
#: ../../standalone/livedrake:1
#, c-format
msgid "Change Cd-Rom"
msgstr "换光盘"
#: ../../lang.pm:1
#, c-format
msgid "Paraguay"
msgstr "巴拉圭"
#: ../../network/netconnect.pm:1
#, c-format
msgid "Configuration is complete, do you want to apply settings ?"
msgstr "配置完成, 您想要应用设置吗?"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Use Incremental/Differential Backups (do not replace old backups)"
msgstr "使用增量/差异备份 (不破坏老备份)"
#: ../../harddrake/sound.pm:1
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr "没有已知的驱动程序可以用在您的声卡 (%s) 上"
#: ../../standalone/drakfloppy:1
#, c-format
msgid "force"
msgstr "强迫"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Exit"
msgstr "退出"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"NOTE: Depending on the printer model and the printing system up to %d MB of "
"additional software will be installed."
msgstr ""
"注意: 根据不同的打印机型号和打印系统, 需要安装附加的软件, 最多会需要 %d MB 空"
"间。"
#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"You don't have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""
"您没有配置好的接口。\n"
"单击“配置”先配置接口"
#: ../../keyboard.pm:1
#, c-format
msgid "Estonian"
msgstr "爱沙尼亚"
#: ../../services.pm:1
#, c-format
msgid ""
"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr "Apache 是一个 WWW 万维网服务器。它提供 HTML 文件和 CGI 等服务。"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Enter your CD Writer device name\n"
" ex: 0,1,0"
msgstr ""
"请输入您的刻盘机设备名\n"
" 如: 0,1,0"
#: ../../standalone/draksec:1
#, c-format
msgid "ALL"
msgstr "所有"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Add/Del Clients"
msgstr "增加/删除客户"
#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
#: ../../standalone/drakpxe:1
#, c-format
msgid "Choose the network interface"
msgstr "选择网卡"
#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Unknown Model"
msgstr "未知型号"
#: ../../harddrake/data.pm:1
#, c-format
msgid "CD/DVD burners"
msgstr "CD/DVD 刻录机"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Partition booted by default\n"
" (for MS-DOS boot, not for lilo)\n"
msgstr ""
"预设的启动分区\n"
" (给 MS-DOS 启动用的, 跟 lilo 无关)\n"
#: ../../standalone/drakperm:1
#, c-format
msgid "Enable \"%s\" to read the file"
msgstr "允许“%s”读取文件"
#: ../../standalone/draksplash:1
#, c-format
msgid "choose image"
msgstr "选择图像"
#: ../../network/shorewall.pm:1
#, c-format
msgid "Firewalling configuration detected!"
msgstr "发现防火墙配置!"
#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Connection name"
msgstr "连接名称"
#: ../../standalone/draksplash:1
#, c-format
msgid ""
"x coordinate of text box\n"
"in number of characters"
msgstr "文本框的 X 坐标, 按字符数计算"
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Updating package selection"
msgstr "更新软件包选择"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "您想把回环(loopback)文件 %s 装载到哪里?"
#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""
"您的软盘已经成功生成。\n"
"您可以用它重现这次安装。"
#: ../../standalone/harddrake2:1
#, c-format
msgid "the number of buttons the mouse has"
msgstr "鼠标按钮数"
#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Replay"
msgstr "重现"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup other files"
msgstr "备份其它文件"
#: ../../install_steps.pm:1
#, c-format
msgid "No floppy drive available"
msgstr "没有可用的软盘驱动器"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup files are corrupted"
msgstr "备份文件损坏了"
#: ../../standalone/drakxtv:1
#, c-format
msgid "TV norm:"
msgstr "电视制式:"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Cpuid family"
msgstr "CPUID 家族"
#: ../../Xconfig/card.pm:1
#, c-format
msgid "32 MB"
msgstr "32 MB"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "type: thin"
msgstr "类型: 瘦"
#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian AZERTY (new)"
msgstr "立陶宛 AZERTY (新式)"
#: ../../standalone/harddrake2:1
#, c-format
msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr "“是”代表算术协处理器附加了意外向量"
#: ../../fsedit.pm:1
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"您选择了把软件 RAID 分区作为根 (/)。\n"
"如果没有一个 /boot 分区, 各种启动引导程序都无法处理这种情况。\n"
"所以, 请增加一个 /boot 分区。"
#: ../../any.pm:1
#, c-format
msgid "Other OS (MacOS...)"
msgstr "其它操作系统(MacOS...)"
#: ../../mouse.pm:1
#, c-format
msgid "To activate the mouse,"
msgstr "要激活鼠标,"
#: ../../install_interactive.pm:1
#, c-format
msgid "Bringing up the network"
msgstr "网络正在启动"
#: ../../common.pm:1
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr "安装完成后, 所有的屏幕抓图都会保存到 %s 之中"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose which one you want to resize in order to install your new\n"
"Mandrake Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
"在硬盘上检测到了多个 Microsoft 分区。\n"
"请选择一个分区改变大小, 以便安装Linux。\n"
"\n"
"\n"
"分区按“Linux 名称”,“Windows 名称”,“容量”的顺序列出。\n"
"“Linux 名称”的结构为：“硬盘类型”,“硬盘编号”,\n"
"“分区编号”(例如, “hda1”)。\n"
"\n"
"“硬盘类型”为“hd”, 如果您的硬盘是 IDE 硬盘；如果为 SCSI 硬盘则为“sd”。\n"
"\n"
"“硬盘编号”总是跟在“hd”或“sd”后面的字符。对于 IDE 硬盘来说：\n"
"\n"
" *“a”意味着“主 IDE 控制器的主硬盘”；\n"
"\n"
" *“b”意味着“主 IDE 控制器的从硬盘”；\n"
"\n"
" *“c”意味着“从 IDE 控制器的主硬盘”；\n"
"\n"
" *“d”意味着“从 IDE 控制器的从硬盘”。\n"
"\n"
"对于 SCSI 硬盘, “a”意味着“最低的 SCSI ID”, “b”意味着“第二低的 SCSI ID”, 等"
"等。\n"
"“Windows 名称”就是硬盘在 Windows 下的盘符(第一个此盘或分区就是“C:”)。"
#: ../../lang.pm:1
#, c-format
msgid "Tanzania"
msgstr "坦桑尼亚"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "计算 FAT 文件系统的边界"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Backup Sources: \n"
msgstr ""
"\n"
"备份来源: \n"
#: ../../standalone/logdrake:1
#, c-format
msgid "Content of the file"
msgstr "文件内容"
#: ../../any.pm:1
#, c-format
msgid "Authentication LDAP"
msgstr "LDAP 认证"
#: ../../harddrake/sound.pm:1
#, c-format
msgid "Let me pick any driver"
msgstr "让我挑选任意驱动"
#: ../../standalone/net_monitor:1
#, c-format
msgid "Profile "
msgstr "配置文件 "
#: ../../standalone/net_monitor:1
#, c-format
msgid "transmitted"
msgstr "已传送"
#: ../../lang.pm:1
#, c-format
msgid "Palestine"
msgstr "巴勒斯坦"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "RAID md%s\n"
msgstr "RAID md%s\n"
#: ../../modules/parameters.pm:1
#, c-format
msgid "%d comma separated strings"
msgstr "%d 个逗号分隔的字符串"
#: ../../network/netconnect.pm:1
#, c-format
msgid " isdn"
msgstr " isdn"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Here is the full list of keyboards available"
msgstr "键盘清单"
#: ../../standalone/draksplash:1
#, c-format
msgid "Theme name"
msgstr "主题名称"
#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
msgid "/_Help"
msgstr "/帮助(_H)"
#: ../../harddrake/sound.pm:1
#, c-format
msgid "Choosing an arbitrary driver"
msgstr "选择其它驱动"
#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"Here you can choose whether the scanners connected to this machine should be "
"accessable by remote machines and by which remote machines."
msgstr ""
"您可以在此选择是否将连接到本机的扫描仪共享给远程计算机, 以及共享给哪些计算"
"机。"
#: ../../standalone/draksplash:1
#, c-format
msgid "the width of the progress bar"
msgstr "进度条的宽度"
#: ../../lang.pm:1
#, c-format
msgid "Cook Islands"
msgstr "库克群岛"
#: ../../fs.pm:1
#, c-format
msgid "Formatting partition %s"
msgstr "正在格式化分区 %s"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Hostname required"
msgstr "需要主机名"
#: ../../standalone/drakfont:1
#, c-format
msgid "Unselect fonts installed"
msgstr "不选已安装的文件"
#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#: ../../interactive/gtk.pm:1 ../../interactive/http.pm:1
#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
#: ../../standalone/drakperm:1 ../../standalone/draksec:1
#: ../../standalone/logdrake:1 ../../standalone/mousedrake:1
#: ../../standalone/net_monitor:1
#, c-format
msgid "Cancel"
msgstr "取消"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Searching for configured scanners ..."
msgstr "正在搜索已配置的扫描仪..."
#: ../../mouse.pm:1
#, c-format
msgid "Wheel"
msgstr "滚轮"
#: ../../harddrake/data.pm:1
#, c-format
msgid "Videocard"
msgstr "图形卡"
#: ../../standalone/drakbackup:1
#, c-format
msgid "\tBackups use tar and bzip2\n"
msgstr "\t使用 tar 和 bzip2 备份\n"
#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
msgid "Remove Selected"
msgstr "删除选中的"
#: ../../standalone/harddrake2:1
#, c-format
msgid "/Autodetect _modems"
msgstr "/自动检测调制解调器(_M)"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remove printer"
msgstr "删除打印机"
#: ../../standalone/drakbackup:1
#, c-format
msgid "View Last Log"
msgstr "查看上次的日志"
#: ../../install_interactive.pm:1
#, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful:\n"
"this operation is dangerous. If you have not already done\n"
"so, you should first exit the installation, run scandisk\n"
"under Windows (and optionally run defrag), then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"警告!\n"
"\n"
"DrakX 现在要调整您的 Windows 分区的大小。为了安全, 您应该先在 Windows 下运\n"
"行 scandisk, 并根据需要运行 defreg。现在您可以退出 Linux 安装去做这些\n"
"准备, 然后重新开始安装。\n"
"一切就绪后, 请按“确定”。"
#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Which services would you like to allow the Internet to connect to?"
msgstr "您想要允许互联网连接到哪些服务?"
#: ../../standalone/logdrake:1
#, c-format
msgid ""
"Welcome to the mail configuration utility.\n"
"\n"
"Here, you'll be able to set up the alert system.\n"
msgstr ""
"欢迎使用邮件配置工具。\n"
"\n"
"在这里您可以您配置警告。\n"
#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#: ../../standalone/drakperm:1
#, c-format
msgid "Other"
msgstr "其它"
#: ../../any.pm:1 ../../harddrake/v4l.pm:1 ../../standalone/drakfloppy:1
#, c-format
msgid "Default"
msgstr "默认"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Button 2 Emulation"
msgstr "两键模拟"
#: ../../security/l10n.pm:1
#, c-format
msgid "Run chkrootkit checks"
msgstr "运行 chkrootkit 检查"
#: ../../standalone/drakfont:1
#, c-format
msgid "type1inst building"
msgstr "正在构造 type1inst"
#: ../../standalone/drakfont:1
#, c-format
msgid "Abiword"
msgstr "Abiword"
#: ../../standalone/draksplash:1
#, c-format
msgid "choose image file"
msgstr "选择图像文件"
#: ../../Xconfig/card.pm:1
#, c-format
msgid "X server"
msgstr "X 服务器"
#: ../../any.pm:1
#, c-format
msgid "Domain Admin User Name"
msgstr "域管理员用户名"
#: ../../standalone/drakxtv:1
#, c-format
msgid "There was an error while scanning for TV channels"
msgstr "搜索电视频道时出错:"
#: ../../keyboard.pm:1
#, c-format
msgid "US keyboard (international)"
msgstr "美式键盘 (国际)"
#: ../../keyboard.pm:1
#, c-format
msgid "Saami (swedish/finish)"
msgstr "北部沙米语(瑞典/芬兰)"
#: ../../standalone/drakbug:1
#, c-format
msgid "Not installed"
msgstr "没有安装"
#: ../../keyboard.pm:1
#, c-format
msgid "Both Alt keys simultaneously"
msgstr "同时按两个 Alt 键"
#: ../../network/netconnect.pm:1
#, c-format
msgid "LAN connection"
msgstr "配置局域网连接"
#: ../../standalone/logdrake:1
#, c-format
msgid "/File/-"
msgstr "/文件(F)/-"
#: ../../keyboard.pm:1
#, c-format
msgid "Italian"
msgstr "意大利"
#: ../../interactive.pm:1
#, c-format
msgid "Basic"
msgstr "基本"
#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"\n"
" Copyright (C) 2002 by MandrakeSoft \n"
"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
"\n"
msgstr ""
"\n"
"版权 (C) 2002 by MandrakeSoft \n"
"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
"\n"
#: ../../lang.pm:1
#, c-format
msgid "Honduras"
msgstr "洪都拉斯"
#: ../../help.pm:1
#, c-format
msgid "pdq"
msgstr "pdq"
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO"
msgstr "网卡 IO"
#: ../../standalone/drakperm:1
#, c-format
msgid "when checked, owner and group won't be changed"
msgstr "选中则不能改变所有者和组"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"该 Bootstrap 分区特别\n"
"是保留给双重启动系统。\n"
#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr "请指定安装的每一步骤, 是要按照本次安装重放, 还是手工完成"
#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"You can also decide here whether scanners on remote machines should be made "
"available on this machine."
msgstr "您还可以在此决定是否要将远程的扫描仪自动安装为本机所用。"
#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Network by FTP.\n"
msgstr "\t-网络通过 FTP。\n"
#: ../../security/l10n.pm:1
#, c-format
msgid "Reports check result to tty"
msgstr "将检查结果报告给 tty"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "You must enter a device or file name!"
msgstr "您需要输入打印机设备名或一文件名!"
#: ../../standalone/harddrake2:1
#, c-format
msgid "/_Quit"
msgstr "/退出(_Q)"
#: ../../network/adsl.pm:1
#, c-format
msgid ""
"You need the alcatel microcode.\n"
"Download it at\n"
"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
"您需要阿尔卡特微码。\n"
"请从\n"
"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
"下载并将 mgmt.o 复制到 /usr/share/speedtouch"
#: ../../Xconfig/various.pm:1
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "显存: %s kB\n"
#: ../../standalone.pm:1
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2, or (at your option)\n"
"any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
" 这个程序是自由软件; 您可以重新发布, 或修改它\n"
" 只要您遵守来自 Free Software Foundation 自由软件基金会的\n"
" GNU General Public License 通用公共许可证第2版, 或者\n"
" 更新的版本。\n"
"\n"
" 我们发行这个软件是希望它有用,\n"
" 但是不提供任何担保; 不保证它\n"
" 适合任何普通或特定的用途。细节\n"
" 见 GNU General Public License 通用公共许可证。\n"
"\n"
" 您应该随同本软件得到一份 GNU General Public License 通用公共许可证\n"
" 您也可以写信给自由软件基金会, 要求他们提供,\n"
" 地址是 Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, "
"MA 02111-1307, USA.\n"
#: ../../any.pm:1
#, c-format
msgid "access to compilation tools"
msgstr "允许使用编译工具"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Please select data to restore..."
msgstr "请选择要恢复的数据..."
#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid ""
"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"如果您计划采用 aboot, 请注意在磁盘的开头位置留下一段自由空间\n"
"( 2048 扇区就足够了)"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Standard test page"
msgstr "标准测试页"
#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Create"
msgstr "新建"
#: ../../standalone/drakbackup:1
#, c-format
msgid "What"
msgstr "内容"
#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "There was an error ordering packages:"
msgstr "排列软件包时出错"
#: ../../keyboard.pm:1
#, c-format
msgid "Bulgarian (BDS)"
msgstr "保加利亚 (BDS)"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Disable Server"
msgstr "禁止服务器"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Filesystem encryption key"
msgstr "文件系统加密密钥"
#: ../../keyboard.pm:1
#, c-format
msgid "Gujarati"
msgstr "Gujarati"
#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""
"请输入需要修改的项目前面的数字,\n"
"按 Enter 继续.\n"
"您的选择? "
#: ../../standalone/draksplash:1
#, c-format
msgid "Save theme"
msgstr "保存主题"
#: ../../lang.pm:1
#, c-format
msgid "Brazil"
msgstr "巴西"
#: ../../standalone/drakautoinst:1
#, c-format
msgid "Auto Install"
msgstr "自动安装"
#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
msgid "Network Configuration Wizard"
msgstr "网络配置向导"
#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Removable media automounting"
msgstr "自动装载可移动介质"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Enter the directory to save:"
msgstr "请输入要保存的目录:"
#: ../../services.pm:1
#, c-format
msgid "Printing"
msgstr "打印"
#: ../../harddrake/sound.pm:1
#, c-format
msgid "Unkown driver"
msgstr "未知的驱动程序"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"There are no printers found which are directly connected to your machine"
msgstr "没有发现打印机直接连接在您的机器上"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Create a new partition"
msgstr "创建一个新分区"
#: ../../harddrake/sound.pm:1
#, c-format
msgid "Driver:"
msgstr "驱动程序："
#: ../../standalone/harddrake2:1
#, c-format
msgid "unknown"
msgstr "未知"
#: ../../install_interactive.pm:1
#, c-format
msgid "Use fdisk"
msgstr "使用 fdisk"
#: ../../mouse.pm:1
#, c-format
msgid "MOVE YOUR WHEEL!"
msgstr "转动滚轮!"
#: ../../standalone/net_monitor:1
#, c-format
msgid "sent: "
msgstr "已发:"
#: ../../network/network.pm:1
#, c-format
msgid "Automatic IP"
msgstr "自动 IP"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"bootloader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": to create an installation floppy disk that will automatically\n"
"perform a whole installation without the help of an operator, similar to\n"
"the installation you just configured.\n"
"\n"
" Note that two different options are available after clicking the button:\n"
"\n"
" * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
" * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
" This feature is very handy when installing a number of similar machines.\n"
"See the Auto install section on our web site for more information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key and type >>linux\n"
"defcfg=\"floppy\" <<.\n"
"\n"
"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
"\"mformat a:\")"
msgstr ""
"现在安装已经完成, 您的 GNU/Linux 系统已经可以使用了。只需单击“下一步 ->”\n"
"就可重新启动系统。在计算机完成硬件测试后, 您所看到的第一个屏幕就是启动引导\n"
"菜单, 您可以从中选择要启动哪个操作系统。\n"
"\n"
"“高级”按钮提供了两个额外的功能：\n"
"\n"
" *“生成自动安装软盘”：创建一张安装软盘。该软盘可在无人值守的情况下, 按照\n"
"您刚才的设置重新安装一个类似的系统。\n"
"\n"
" 请注意, 单击按钮后有个两选项：\n"
"\n"
" *“重放”：部分自动安装, 只有磁盘分区部分是交互的。\n"
"\n"
" *“自动”：全自动安装, 清除硬盘上原有的数据。\n"
"\n"
" 如果有一大批相同的机器要安装, 这个功能非常方便。请参考我们网站上的自动\n"
"安装部分。\n"
"\n"
" *“保存软件包选择”(*)：把您刚才选择的软件包记录在软盘上。要使用本次的\n"
"安装包执行另外一次安装, 请插入软盘然后开始安装。出现提示的时候, 按 F1 键, \n"
"输入 >>linux defcfg=\"floppy\"<<。\n"
"\n"
"(*) 您需要 FAT 格式化的软盘(要在 GNU/Linux 下面制作, 输入命令\n"
"“mformat a:”)。"
#: ../../lang.pm:1
#, c-format
msgid "Moldova"
msgstr "摩尔多瓦"
#: ../../mouse.pm:1
#, c-format
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configuration of a remote printer"
msgstr "配置远程打印机"
#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
msgid "An online platform to respond to enterprise support needs."
msgstr "专为响应企业的特殊要求提供专业服务的在线支持平台"
#: ../../network/network.pm:1
#, c-format
msgid "URL should begin with 'ftp:' or 'http:'"
msgstr "Url 应该是以“ftp:”或“http:”开头"
#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Oriya"
msgstr "叙利亚"
#: ../../standalone/drakperm:1
#, c-format
msgid "Add a new rule at the end"
msgstr "在末尾添加新的规则"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can also decide here whether printers on remote machines should be "
"automatically made available on this machine."
msgstr "您还可以在此决定是否要将远程的打印机自动安装为本机所用。"
#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"现在给模块 %s 指定它的选项。\n"
"选项的格式是“name=value name2=value2...”\n"
"例如,“io=0x300 irq=7”"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Quit without writing the partition table?"
msgstr "不写入分区表而退出?"
#: ../../mouse.pm:1
#, c-format
msgid "Genius NetScroll"
msgstr "Genius NetScroll"
#: ../../standalone.pm:1
#, c-format
msgid "Installing packages..."
msgstr "正在安装软件包..."
#: ../../keyboard.pm:1
#, c-format
msgid "Dutch"
msgstr "荷兰"
#: ../../standalone/drakbackup:1
#, c-format
msgid "The following packages need to be installed:\n"
msgstr "下列软件包需要安装:\n"
#: ../../lang.pm:1
#, c-format
msgid "Angola"
msgstr "安哥拉"
#: ../../standalone/logdrake:1
#, c-format
msgid "service setting"
msgstr "服务设置"
#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
msgid "Custom"
msgstr "定制"
#: ../../lang.pm:1
#, c-format
msgid "Latvia"
msgstr "拉脱维亚"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "文件已经被另一个回环使用, 请另外选择一个"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Read-only"
msgstr "只读"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Enable/Disable name resolution spoofing protection. If\n"
"\"alert\" is true, also reports to syslog."
msgstr ""
"启用/禁用名称解析欺骗保护。如果“alert”为 true, \n"
"还同时报告到系统日志。"
#: ../../harddrake/sound.pm:1
#, c-format
msgid "No known driver"
msgstr "没有已知驱动程序"
#: ../../Xconfig/card.pm:1
#, c-format
msgid "1 MB"
msgstr "1 MB"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"If it is not the one you want to configure, enter a device name/file name in "
"the input line"
msgstr "如果您要使用的打印机不在其中, 请在输入栏输入一个设备名或文件名"
#: ../../standalone/draksound:1
#, c-format
msgid ""
"No Sound Card has been detected on your machine. Please verify that a Linux-"
"supported Sound Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
"在您的机器上没有检测到声卡。请检查您是否正确的安装了您的声卡, 它是否被 Linux "
"支持。\n"
"\n"
"\n"
"您可以访问硬件数据库:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/zh_CN/hardware.php3"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Configure Local Area Network..."
msgstr "配置局域网..."
#: ../../security/l10n.pm:1
#, c-format
msgid "Verify checksum of the suid/sgid files"
msgstr "校验 suid/sgid 文件的校验和"
#: ../../services.pm:1
#, c-format
msgid "Launch the sound system on your machine"
msgstr "启动计算机上的声音系统"
#: ../../security/l10n.pm:1
#, c-format
msgid "Run some checks against the rpm database"
msgstr "对 rpm 数据库执行一些检查"
#: ../../standalone/drakperm:1
#, c-format
msgid "Execute"
msgstr "执行"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Preparing printer database..."
msgstr "正在准备打印机数据..."
#: ../../standalone/harddrake2:1
#, c-format
msgid "Information"
msgstr "信息"
#: ../../network/drakfirewall.pm:1
#, c-format
msgid "No network card"
msgstr "没有网卡"
#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
msgid "Which filesystem do you want?"
msgstr "您希望使用哪种文件系统?"
#: ../../mouse.pm:1
#, c-format
msgid "3 buttons"
msgstr "三键"
#: ../../lang.pm:1
#, c-format
msgid "Malta"
msgstr "马耳他"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Detailed information"
msgstr "详细信息"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Printer default settings\n"
"\n"
"You should make sure that the page size and the ink type/printing mode (if "
"available) and also the hardware configuration of laser printers (memory, "
"duplex unit, extra trays) are set correctly. Note that with a very high "
"printout quality/resolution printing can get substantially slower."
msgstr ""
"打印机默认设置\n"
"\n"
"您应该确定页面大小和墨水类型/打印模式(若可用)和激光打印机的硬件配置(内存, 双"
"工单元, 托纸盘)设置正确。注意超高质量/分辨率打印可能会变得很慢。"
#: ../../install_any.pm:1
#, c-format
msgid "This floppy is not FAT formatted"
msgstr "该软盘不是 FAT 格式"
#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid "Configuring network"
msgstr "配置网络"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"This option will save files that have changed. Exact behavior depends on "
"whether incremental or differential mode is used."
msgstr ""
#: ../../Xconfig/main.pm:1
#, c-format
msgid "Graphic Card"
msgstr "图形卡"
#: ../../install_interactive.pm:1
#, c-format
msgid "Resizing Windows partition"
msgstr "计算 Windows 文件系统的边界"
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider dns 1 (optional)"
msgstr "服务商 dns 1"
#: ../../lang.pm:1
#, c-format
msgid "Cameroon"
msgstr "喀麦隆"
#: ../../install_interactive.pm:1
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, don't forget to save using `w'"
msgstr ""
"您现在可以在 %s 上分区。\n"
"做完之后, 不要忘记用“w”命令保存您的修改"
#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
msgid "Close"
msgstr "关闭"
#: ../../help.pm:1
#, c-format
msgid ""
"\"%s\": check the current country selection. If you are not in this\n"
"country, click on the \"%s\" button and choose another one. If your country\n"
"is not in the first list shown, click the \"%s\" button to get the complete\n"
"country list."
msgstr ""
"“%s”：检查目前的国家选择。如果您并不在此国家, 请单击“%s”按钮然后另外选择。\n"
"如果您的国家并未列在最先出现的列表中, 请选择“%s”按钮来获取完整的国家列\n"
"表。"
#: ../../standalone/logdrake:1
#, c-format
msgid "Calendar"
msgstr "日历"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Restore Selected\n"
"Catalog Entry"
msgstr ""
"恢复选中的\n"
"目录项"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To use a remote lpd printer, you need to supply the hostname of the printer "
"server and the printer name on that server."
msgstr ""
"要使用一个远程的 lpd 打印队列, 您需要指定打印服务器的\n"
"主机名和打印任务要送往的打印队列的名字."
#: ../../lang.pm:1
#, c-format
msgid "Iceland"
msgstr "冰岛"
#: ../../common.pm:1
#, c-format
msgid "consolehelper missing"
msgstr "缺少 consolehelper"
#: ../../services.pm:1
#, c-format
msgid "stopped"
msgstr "停止"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Whether the FPU has an irq vector"
msgstr "FPU 是否有 IRQ 向量"
#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Ext2"
msgstr "Ext2"
#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Expand Tree"
msgstr "展开树"
#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
"旧的“%s”驱动程序已列于黑名单。\n"
"\n"
"据报告该程序可能在卸装时使内核崩溃。\n"
"\n"
"新的“%s”驱动程序仅会在下此启动时使用。"
#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#: ../../standalone/drakfloppy:1
#, c-format
msgid "Expert Mode"
msgstr "专家模式"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer options"
msgstr "打印机选项"
#: ../../standalone/drakgw:1
#, c-format
msgid "Local Network adress"
msgstr "本地网络地址"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup your System files. (/etc directory)"
msgstr "备份系统文件。(/etc 目录)"
#: ../../security/help.pm:1
#, c-format
msgid "Set the user umask."
msgstr "设置用户 umask。"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been updated after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates ?"
msgstr ""
"您现在有机会下载软件更新包.更新软件包是在发行版发布之后发布的。它们可能包含对"
"一些安全问题或故障的修改。\n"
"\n"
"要下载这些软件包, 您的网络连接必须已经配置好并且可以使用。\n"
"\n"
"您是否要安装升级包?"
#: ../../standalone/logdrake:1
#, c-format
msgid "Samba Server"
msgstr "Samba 服务器"
#: ../../standalone/drakxtv:1
#, c-format
msgid "Australian Optus cable TV"
msgstr "澳大利亚 Optus 光缆 TV"
#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr " <Tab>/<Alt-Tab> 在项目间移动 | <空格> 选择 | <F12> 下个画面 "
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Subnet:"
msgstr "子网:"
#: ../../lang.pm:1
#, c-format
msgid "Zimbabwe"
msgstr "津巴布韦"
#: ../../standalone/drakbackup:1
#, c-format
msgid "When"
msgstr "时间"
#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Second DNS Server (optional)"
msgstr "第二个 备选DNS 服务器"
#: ../../lang.pm:1
#, c-format
msgid "Finland"
msgstr "芬兰"
#: ../../Xconfig/various.pm:1
#, c-format
msgid "Color depth: %s\n"
msgstr "彩色深度: %s\n"
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "You can't unselect this package. It must be upgraded"
msgstr "您不能不选择这个软件包。它必须升级"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Loading from floppy"
msgstr "正从软盘载入"
#: ../../security/help.pm:1
#, c-format
msgid "Enable/Disable the logging of IPv4 strange packets."
msgstr "启用/禁用 IPv4 怪包日志。"
#: ../../lang.pm:1
#, c-format
msgid "Slovenia"
msgstr "斯洛文尼亚"
#: ../../standalone/mousedrake:1
#, c-format
msgid "Mouse test"
msgstr "鼠标测试"
#: ../../standalone/drakperm:1
#, c-format
msgid ""
"Drakperm is used to see files to use in order to fix permissions, owners, "
"and groups via msec.\n"
"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
"可以使用 Drakperm 查看权限定义文件, msec 使用它们来调整各种文件权限, 所有者, "
"组等。\n"
"您可以编写自己的规则以代替各种默认的规则。"
#: ../../ugtk.pm:1
#, c-format
msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
#: ../../any.pm:1
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"请输入一个用户名\n"
"%s"
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"- PCI and USB devices: this lists the vendor, device, subvendor and "
"subdevice PCI/USB ids"
msgstr ""
"- PCI 和 USB 设备: 列出 PCI/USB 的 vendor, device, subvendor 和 subdevice 代"
"码"
#: ../../standalone/draksplash:1
#, c-format
msgid "ProgressBar color selection"
msgstr "进度条颜色选择"
#: ../../any.pm:1
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"启动菜单中现有下列条目。\n"
"您可以增加或是更改已存在的条目。"
#: ../../help.pm:1
#, c-format
msgid "/dev/hda"
msgstr "/dev/hda"
#: ../../help.pm:1
#, c-format
msgid "/dev/hdb"
msgstr "/dev/hdb"
#: ../../services.pm:1
#, c-format
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""
"使用 at 命令可以在指定时间运行您的命令。\n"
"还可以在平均负载足够低的时候运行批处理命令。"
#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Radio support:"
msgstr "无线电支持:"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing SANE packages..."
msgstr "正在安装 SANE 包..."
#: ../../any.pm:1
#, c-format
msgid "LDAP"
msgstr "LDAP"
#: ../../bootloader.pm:1
#, c-format
msgid "SILO"
msgstr "SILO"
#: ../../diskdrake/removable.pm:1
#, c-format
msgid "Change type"
msgstr "改变类型"
#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid ", USB printer #%s"
msgstr ", USB 打印机 #%s"
#: ../../any.pm:1
#, c-format
msgid "SILO Installation"
msgstr "SILO 安装"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Use CD/DVDROM to backup"
msgstr "使用 CD/DVDROM 备份"
#: ../../install_messages.pm:1
#, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of Mandrake "
"Linux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
"恭喜。安装完成了。\n"
"取出开机的光盘或软盘, 然后按 ENTER, 重新启动您的系统。\n"
"\n"
"\n"
"要了解 Mandrake Linux 的修改和更新,\n"
"请访问我们的网站 \n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"关于如何配置您的系统, 请查看 Mandrake Linux 用户手册。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "paranoid"
msgstr "严格"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Send mail report after each backup to:"
msgstr "在每次备份后发送邮件报告给:"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""
"该命令您可用在许多应用的打印对话框的“打印命令”项。但是此处并不提供文件名, 因"
"为要打印的文件由应用程序提供。\n"
#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Resolution"
msgstr "屏幕分辨率"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print to a SMB printer, you need to provide the SMB host name (Note! It "
"may be different from its TCP/IP hostname!) and possibly the IP address of "
"the print server, as well as the share name for the printer you wish to "
"access and any applicable user name, password, and workgroup information."
msgstr ""
"如果您要使用的是 SMB 打印机 (就是 Windows 9x/NT 网络共享打印机),\n"
"您需要说明主机的 SMB 名字 (注意! 是您在 Windows 网络\n"
"邻居里看到的主机名, 可能与它的 TCP/IP 主机名不同,), 可能还需要它的 IP 地址,\n"
"以及有权访问打印机的用户名, 工作组和密码, 当然还有打印机的共享名。"
#: ../../security/help.pm:1
#, c-format
msgid ""
" Enabling su only from members of the wheel group or allow su from any user."
msgstr "只对轮组成员启用 su 或允许任何用户 su。"
#: ../../standalone/drakgw:1
#, c-format
msgid "reconfigure"
msgstr "重新配置"
#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"使用 XFree %s, 您的显示卡可以得到 3D 硬件加速支持。\n"
"注意这是试验阶段的支持, 它可能会使您的电脑失去反应。"
#: ../../security/l10n.pm:1
#, c-format
msgid "Shell timeout"
msgstr "Shell 超时"
#: ../../standalone/logdrake:1
#, c-format
msgid "Xinetd Service"
msgstr "Xinetd 服务"
#: ../../any.pm:1
#, c-format
msgid "access to network tools"
msgstr "允许使用网络工具"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Firmware-Upload for HP LaserJet 1000"
msgstr "惠普 LaserJet 1000 的固件上载"
#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
"And, of course, push multimedia to its limits with the very latest software "
"to play videos, audio files and to handle your images or photos."
msgstr ""
"同样不能错过的还有, 用最新版的软件将多媒体发挥至极限, 从播放电影、音乐到处理"
"您的图像和照片。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Here is a list of all auto-detected printers. "
msgstr "下面所列为自动检测到的打印机"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"安装 aboot 时出错, \n"
"强迫安装会毁坏第一个分区, 要继续吗?"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Restore Selected\n"
"Files"
msgstr ""
"恢复选中的\n"
"文件"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"%s exists, delete?\n"
"\n"
"Warning: If you've already done this process you'll probably\n"
" need to purge the entry from authorized_keys on the server."
msgstr ""
"%s 已存在, 要删除吗?\n"
"\n"
"警告: 如果您曾经做过这个步骤, 您可能需要\n"
"从服务器的的 authorized_keys 删除该项目。"
#: ../../network/tools.pm:1
#, c-format
msgid "Please fill or check the field below"
msgstr "请填写或选择下列项目"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "您想要保存 /etc/fstab 修改吗?"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Boot Protocol"
msgstr "启动协议"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM 磁盘 %s\n"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "The package %s is needed. Install it?"
msgstr "需要安装软件包 %s。您同意安装吗?"
#: ../../services.pm:1
#, c-format
msgid "On boot"
msgstr "启动时"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Bus identification"
msgstr "总线标识"
#: ../../lang.pm:1
#, c-format
msgid "Vatican"
msgstr "梵蒂冈"
#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Please make a backup of your data first"
msgstr "请先备份您的数据"
#: ../../install_interactive.pm:1
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "您有不只一个硬盘, 您要在哪个上面安装 Linux?"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Boot ISO"
msgstr "启动 ISO"
#: ../../lang.pm:1
#, c-format
msgid "Eritrea"
msgstr "厄立特里亚"
#: ../../standalone/drakfont:1
#, c-format
msgid "Remove List"
msgstr "删除列表"
#: ../../share/advertising/05-desktop.pl:1
#, c-format
msgid "A customizable environment"
msgstr "可自定义的环境"
#: ../../keyboard.pm:1
#, c-format
msgid "Inuktitut"
msgstr "因纽特"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Some protocols, like rsync, may be configured at the server end. Rather "
"than using a directory path, you would use the 'module' name for the service "
"path."
msgstr ""
#: ../../lang.pm:1
#, c-format
msgid "Morocco"
msgstr "摩洛哥"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Which printer model do you have?"
msgstr "请问您的打印机的型号?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Add a new printer"
msgstr "增加打印机"
#: ../../standalone/drakbackup:1
#, c-format
msgid " All of your selected data have been "
msgstr " 您选择的全部数据已经 "
#: ../../lang.pm:1
#, c-format
msgid "Nepal"
msgstr "尼泊尔"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "<-- Delete"
msgstr "<-- 删除"
#: ../../harddrake/data.pm:1
#, c-format
msgid "cpu # "
msgstr "CPU # "
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "chunk size"
msgstr "组块大小"
#: ../../security/help.pm:1
#, c-format
msgid ""
"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
"\n"
"If set to NONE, no issues are allowed.\n"
"\n"
"Else only /etc/issue is allowed."
msgstr ""
"如果设为 ALL, 则允许 /etc/issue 和 /etc/issue.net 存在。\n"
"\n"
"如果设为 NONE, 则除了 /etc/issue 以外不允许任何事务。\n"
"否则只能允许 /etc/issue。"
#: ../../security/help.pm:1
#, c-format
msgid " Enable/Disable sulogin(8) in single user level."
msgstr "在单用户级别上启用/禁用 sulogin(8)。"
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "commands before booting, or 'c' for a command-line."
msgstr "commands before booting, or 'c' for a command-line."
#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid "Problems installing package %s"
msgstr "安装 %s 软件包出现问题"
#: ../../standalone/logdrake:1
#, c-format
msgid "You will receive an alert if the load is higher than this value"
msgstr "当负载超过这个值时您会收到一个警报"
#: ../../standalone/drakbug:1
#, c-format
msgid ""
"\n"
"\n"
"To submit a bug report, click on the button report.\n"
"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
" where you'll find a form to fill in.The information displayed above will "
"be \n"
"transferred to that server\n"
"\n"
msgstr ""
"\n"
"\n"
"要提交故障报告, 单击报告按钮。\n"
"它会打开一个浏览器窗口, 进入 https://drakbug.mandrakesoft.com\n"
"那里有一个表格需要您填写。上面显示的信息将被传送到服务器。\n"
"\n"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Add a scanner manually"
msgstr "手动添加扫描仪"
#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Reload partition table"
msgstr "重新读取分区表"
#: ../../standalone/drakboot:1
#, c-format
msgid "Yes, I want autologin with this (user, desktop)"
msgstr "是, 以(用户, 桌面)登录"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Selected"
msgstr "恢复选中文件"
#: ../../standalone/drakfont:1
#, c-format
msgid "Search for fonts in installed list"
msgstr "在安装记录中查找字体"
#: ../../standalone/drakgw:1
#, c-format
msgid "The Local Network did not finish with `.0', bailing out."
msgstr "本地网络没有以“.0”结束, 已经修改。"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Boot"
msgstr "启动"
#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Tuner type:"
msgstr "调谐器类型:"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other OSs may\n"
"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
"is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
"experience with GNU/Linux.\n"
"\n"
" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
"printing to your local printer or to one halfway around the planet. It is\n"
"simple to configure and can act as a server or a client for the ancient\n"
"\"lpd \" printing system, so it compatible with older operating systems\n"
"which may still need print services. While quite powerful, the basic setup\n"
"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
"front-ends for printing or choosing printer options and for managing the\n"
"printer.\n"
"\n"
"If you make a choice now, and later find that you don't like your printing\n"
"system you may change it by running PrinterDrake from the Mandrake Control\n"
"Center and clicking the expert button."
msgstr ""
"现在应该为您的计算机选择打印系统了。其它的操作系统也许只提供了一种选择, 但\n"
"Mandrake Linux 提供了两种。每种打印系统都能够在不同的配置中大展身手。\n"
"\n"
" *“pdq”- 这是“不排队打印”缩写系统。如果您的打印机是直接连接在这台电脑\n"
"上的, 您也不会打印太多的任务, 更不会使用网络打印机, 那么请选择本系统。\n"
"(“pdp”只能应付极为简单的网络情况, 而且在网络中使用也很慢。)如果您从来没有\n"
"使用过 GNU/Linux, 那么推荐您使用“pdq”。\n"
"\n"
" *“CUPS”-“通用 Unix 打印系统”, 不论是打印到本地打印机, 还是打印到地球\n"
"另一面的网络打印机, 本系统都能完全胜任。它配置简单, 甚至可以作为老式“lpd”\n"
"打印系统的服务器和客户机。所以即便是老得掉牙的操作系统需要打印服务的话, 都\n"
"可以顺畅的应用本系统。尽管它的功能十分强大, 可它的基本设置仍然和“pdq”一样\n"
"简单。如果您想模拟一台“lpd”服务器, 不要忘了打开“cups-lpd”守护程序。\n"
"“CUPS”还包括一个图形界面, 可用来打印或选择打印机选项, 以及管理打印机。\n"
"\n"
"如果您现在进行了选择, 但稍后又发现您并不喜欢所选择的打印系统, 可以轻松修"
"改。\n"
"只需从 Mandrake 控制中心中选择 PrinterDrake, 然后单击专家按钮。"
#: ../../keyboard.pm:1
#, c-format
msgid "\"Menu\" key"
msgstr "“菜单”键"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"\n"
"Please check whether Printerdrake did the auto-detection of your printer "
"model correctly. Find the correct model in the list when a wrong model or "
"\"Raw printer\" is highlighted."
msgstr ""
"\n"
"\n"
"请检查 Printerdrake 用自动检测选择的型号是否与您的打印机一致。如果选中的是不"
"正确的型号或“原始打印机”, 请从列表中选择正确的型号。"
#: ../../standalone/draksec:1
#, c-format
msgid "Security Administrator:"
msgstr "安全管理员:"
#: ../../security/help.pm:1
#, c-format
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr "设置 shell 超时。若设为 0, 则为没有超时。"
#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check permissions of files in the users' home."
msgstr "如果设为 yes, 就会在用户 home 里检查文件的允许权限。"
#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"You don't have an Internet connection.\n"
"Create one first by clicking on 'Configure'"
msgstr ""
"您没有因特网连接。\n"
"单击“配置”先建立连接"
#: ../../standalone/drakfont:1
#, c-format
msgid "Fonts copy"
msgstr "复制字体"
#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Automated"
msgstr "自动"
#: ../../Xconfig/test.pm:1
#, c-format
msgid "Do you want to test the configuration?"
msgstr "您想要测试您的配置吗?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
"GIMP."
msgstr "成功的从 Star Office/OpenOffice.org/GIMP 删除打印机“%s”。"
#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Save packages selection"
msgstr "保存软件包选择"
#: ../../standalone/drakautoinst:1
#, c-format
msgid "Remove the last item"
msgstr "删除最后一项吗?"
#: ../../standalone/drakbackup:1
#, c-format
msgid "User list to restore (only the most recent date per user is important)"
msgstr "可恢复的用户清单 (每个用户最近的数据是重要的)"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "No net boot images created!"
msgstr "没有创建网络启动镜像!"
#: ../../network/adsl.pm:1
#, c-format
msgid "use pptp"
msgstr "使用 pptp"
#: ../../services.pm:1
#, c-format
msgid "Choose which services should be automatically started at boot time"
msgstr "选择开机时自动启动的服务"
#: ../../security/l10n.pm:1
#, c-format
msgid "Check files/directories writable by everybody"
msgstr "检查每人可写的文件/目录"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Learn how to use this printer"
msgstr "了解怎样使用此打印机"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configure the network now"
msgstr "立即配置网络"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose a mirror from which to get the packages"
msgstr "选择一个镜象网站来取得程序"
#: ../../install_interactive.pm:1
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occured: %s"
msgstr ""
"改变 FAT 分区大小的程序无法处理这个分区, \n"
"发生了如下错误: %s"
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Size: "
msgstr "大小: "
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Which sector do you want to move it to?"
msgstr "您想移动到哪个扇区?"
#: ../../interactive/stdio.pm:1
#, c-format
msgid "Do you want to click on this button?"
msgstr "您希望单击此按钮吗?"
#: ../../lang.pm:1
#, c-format
msgid "Bahamas"
msgstr "巴哈马"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Manual configuration"
msgstr "手工配置"
#: ../../standalone/logdrake:1
#, c-format
msgid "search"
msgstr "搜索"
#: ../../services.pm:1
#, c-format
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"这个程序按照 /etc/sysconfig/keyboard 的设定加载选择的键盘映射。\n"
"您可以使用 kbdconfig 工具修改这个设定。对大多数机器, 应该开启这个服务。"
#: ../../Xconfig/card.pm:1
#, c-format
msgid "Xpmac (installation display driver)"
msgstr "Xpmac (安装显卡驱动)"
#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid "Zeroconf host name must not contain a ."
msgstr "Zeroconf 主机名必须包含 ."
#: ../../security/help.pm:1
#, c-format
msgid " Accept/Refuse icmp echo."
msgstr " 允许/拒绝 ICMP 回应。"
#: ../../services.pm:1
#, c-format
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files. It is a good idea to always run syslog."
msgstr ""
"Syslog 是这样一个设施, 很多其它的后台服务利用它在\n"
"各种系统日志文件中记录日志消息. 一直运行 syslog 是个好主意。"
#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Unknown/Others"
msgstr "未知/其他"
#: ../../standalone/drakxtv:1
#, c-format
msgid "No TV Card detected!"
msgstr "没有发现电视卡!"
#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Options"
msgstr "选项"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr "打印机“%s”设为却省打印机。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they work only when "
"connected to the first parallel port. When your printer is connected to "
"another port or to a print server box please connect the printer to the "
"first parallel port before you print a test page. Otherwise the printer will "
"not work. Your connection type setting will be ignored by the driver."
msgstr ""
"您正在配置OKI 激光打印机。由于这些打印机使用了特别的通讯协\n"
"议, 因此只能连在第一个并行口。如果您连接到其他的端口或者打印服务器箱, 请在您"
"打印测试页时现将其连接到第一个并行口上。否则, 该打印机将不会工作。您的连接类"
"型设置将会被驱动程序忽略。"
#: ../../standalone/harddrake2:1
#, c-format
msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
msgstr "CPU 世代(如 8 代表 PentiumIII, 等等)"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Auto-detected"
msgstr "自动检测到"
#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"You are about to configure your computer to install a PXE server as a DHCP "
"server\n"
"and a TFTP server to build an installation server.\n"
"With that feature, other computers on your local network will be installable "
"using this computer as source.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"您将要在您的电脑上配置一个安装服务器, 这包括安装一个 PXE 服务器并把它配置\n"
"为 DHCP 服务器和 TFTP 服务器。\n"
"使用此特性, 您局域网上的其它电脑就能够从这个服务器安装系统。\n"
"\n"
"继续之前, 请一定要使用 drakconnect 配置您的网络和互联网连接。\n"
"\n"
"注意：要建立一个局域网(LAN), 您需要专用的网卡。"
#: ../../security/l10n.pm:1
#, c-format
msgid "Authorize TCP connections X Window"
msgstr "认证 TCP 连接 X Window"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
"无法创建开机启动空间(1MB)! 安装将继续, 但如需启动系统, 您可用DiskDrake创建启"
"动分区"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please choose the printer you want to set up or enter a device name/file "
"name in the input line"
msgstr "请选择要设置的打印机或输入一个设备名或文件名到输入栏"
#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Refuse"
msgstr "拒绝"
#: ../../standalone/draksec:1
#, c-format
msgid "LOCAL"
msgstr "本地"
#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "HFS"
msgstr "HFS"
#: ../../services.pm:1
#, c-format
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""
"HardDrake进行硬件检测, 以及选项配置\n"
"新增/修改硬件"
#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
msgid "Remote Printers"
msgstr "远程打印机"
#: ../../fs.pm:1
#, c-format
msgid "Creating and formatting file %s"
msgstr "正在创建和格式化文件 %s"
#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check additions/removals of sgid files."
msgstr "如果设为 yes, 就会在 sgid 文件中检查添加/删除。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
"on. Download the Windows driver package from the HP web site (the firmware "
"on the printer's CD does not work) and extract the firmware file from it by "
"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
"printer' directory. There it will be found by the automatic uploader script "
"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
"惠普 LaserJet 1000 需要在打开之前先上传固件。请您从惠普的网站上下载 Windows "
"驱动程序包(打印机光盘上的固件无效), 并从中提取固件文件。只需用“unzip”一类的工"
"具从自解压的“.exe”文件打开, 然后找到“sihp1000.img”文件。将此文件复制到“/etc/"
"printer”目录中。这样该文件就会被自动上传脚本发现, 从而在打印机开机时会被自动"
"上传到打印机中。\n"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "选择加入一个已存在的 LVM"
#: ../../standalone/drakfont:1
#, c-format
msgid "xfs restart"
msgstr "重新启动 xfs"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""
"打印机“%s”已经存在,\n"
"真的覆盖配置?"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "No partition available"
msgstr "没有可用的硬盘分区"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Use the scanners on hosts: "
msgstr "在下列主机上使用扫描仪: "
#: ../../standalone/drakfont:1
#, c-format
msgid "Unselected All"
msgstr "取消选择"
#: ../../standalone/logdrake:1
#, c-format
msgid "Domain Name Resolver"
msgstr "域名解析器"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Encryption key (again)"
msgstr "加密密钥(再一次)"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Samba share name missing!"
msgstr "缺少 Samba 共享名!"
#: ../../standalone/drakfont:1
#, c-format
msgid "True Type install done"
msgstr "TrueType 字体安装完成"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Detection in progress"
msgstr "检测进行中"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Build Whole Kernel -->"
msgstr "建造整个内核 -->"
#: ../../network/netconnect.pm:1
#, c-format
msgid "modem"
msgstr "调制解调器"
#: ../../install_steps.pm:1
#, c-format
msgid "Welcome to %s"
msgstr "欢迎来到 %s"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please insert the Update Modules floppy in drive %s"
msgstr "请在驱动器 %s 中插入一张更新模块软盘"
#: ../../standalone/drakboot:1
#, c-format
msgid "Bootsplash"
msgstr "Bootsplash 开机画面"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"is directly connected to your system"
msgstr ""
"下列打印机\n"
"\n"
"%s%s\n"
"直接连接在您的系统"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer sharing on hosts/networks: "
msgstr "在主机/网络上共享打印机："
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
"“%s”命令也可用来修改打印作业的选项, 例如:“%s <file>”。"
#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without them. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"有时候需要给 %s 驱动程序指定额外的信息才能正常运行, 尽管通常不需要.\n"
"您可以在这里指定一些额外的选项, 也可以让驱动程序探测您的机器, 自动\n"
"确定需要的信息。偶尔会发生机器在探测中停止反应, 不过这不会损坏什么. \n"
"您决定怎么做?"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Not the correct CD label. Disk is labelled %s."
msgstr "光盘盘标不对。这张盘的卷标是 %s。"
#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Welcome to the Internet Connection Sharing utility!\n"
"\n"
"%s\n"
"\n"
"Click on Configure to launch the setup wizard."
msgstr ""
"欢迎使用 Internet 连接共享配置工具!\n"
"\n"
"%s\n"
"\n"
"单击“配置”运行配置向导。"
#: ../../lang.pm:1
#, c-format
msgid "Cuba"
msgstr "古巴"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Searching for new printers..."
msgstr "正在搜索新的打印机..."
#: ../../lang.pm:1
#, c-format
msgid "Belize"
msgstr "伯利兹"
#: ../../standalone/drakbackup:1
#, c-format
msgid " (multi-session)"
msgstr " (多道)"
#: ../../any.pm:1
#, c-format
msgid "Kernel Boot Timeout"
msgstr "核心启动超时"
#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"使用 XFree %s, 您的显示卡可以得到 3D 硬件加速支持。\n"
"XFree %s 支持您的显示卡, 它能提供更好的 2D 支持。"
#: ../../security/help.pm:1
#, c-format
msgid " Activate/Disable daily security check."
msgstr " 激活/取消每日安全检查。"
#: ../../security/l10n.pm:1
#, c-format
msgid "Enable libsafe if libsafe is found on the system"
msgstr "启用 libsafe, 若在系统中发现 libsafe"
#: ../../install_interactive.pm:1
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "DrakX 分区向导找到下列解决办法:"
#: ../../keyboard.pm:1
#, c-format
msgid "Hungarian"
msgstr "匈牙利"
#: ../../network/isdn.pm:1
#, c-format
msgid ""
"Select your provider.\n"
"If it isn't listed, choose Unlisted."
msgstr ""
"挑选您的提供商。\n"
"如果该提供商未列出, 请选择未列出。"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Automatic time synchronization (using NTP)"
msgstr "自动时间同步(使用NTP)"
#: ../../Xconfig/card.pm:1
#, c-format
msgid "8 MB"
msgstr "8 MB"
#: ../../any.pm:1
#, c-format
msgid "LDAP Server"
msgstr "LDAP 服务器"
#: ../../services.pm:1
#, c-format
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops. It won't get started unless configured so it is safe to "
"have\n"
"it installed on machines that don't need it."
msgstr ""
"PCMCIA 支持通常用于在笔记本电脑中添加\n"
"以太网卡或者调制解调器。如果没有配置它不会启动,\n"
"所以不必担心它。"
#: ../../network/tools.pm:1
#, c-format
msgid "Choose your country"
msgstr "选择国家"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- System Files:\n"
msgstr ""
"\n"
"- 系统文件:\n"
#: ../../standalone/drakbug:1
#, c-format
msgid "Standalone Tools"
msgstr "独立工具"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Where"
msgstr "位置"
#: ../../standalone/logdrake:1
#, c-format
msgid "but not matching"
msgstr "不匹配"
#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""
"您可以在这里配置可以用在您的声卡 (%s) 上的替代驱动程序 (可以选择 OSS 或 "
"ALSA)。"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Configuring PCMCIA cards..."
msgstr "正在配置 PCMCIA 卡..."
#: ../../common.pm:1
#, c-format
msgid "kdesu missing"
msgstr "缺少 kdesu"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "%s: %s requires a username...\n"
msgstr "%s: %s 需要用户名...\n"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Encryption key"
msgstr "加密密钥"
#: ../../mouse.pm:1
#, c-format
msgid "Microsoft IntelliMouse"
msgstr "微软智能鼠标"
#: ../../lang.pm:1
#, c-format
msgid "Christmas Island"
msgstr "圣诞岛"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Installation of bootloader failed. The following error occured:"
msgstr "安装系统引导程序失败, 出现下列错误:"
#: ../../standalone/harddrake2:1
#, c-format
msgid "EIDE/SCSI channel"
msgstr "EIDE/SCSI 通道"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Set this printer as the default"
msgstr "设置该打印机为默认"
#: ../../install_interactive.pm:1
#, c-format
msgid "partition %s"
msgstr "分区 %s"
#: ../../security/level.pm:1
#, c-format
msgid "Paranoid"
msgstr "苛刻"
#: ../../any.pm:1
#, c-format
msgid "NIS"
msgstr "NIS"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "<-- Del User"
msgstr "<-- 删除用户"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Location on the bus"
msgstr "在总线上的位置"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "No printer found!"
msgstr "没有发现打印机!"
#: ../../standalone/harddrake2:1
#, c-format
msgid "the vendor name of the device"
msgstr "设备的厂家名称"
#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
msgid "Erase entire disk"
msgstr "清除整个磁盘"
#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid " (Default)"
msgstr " (默认)"
#: ../../standalone/drakgw:1
#, c-format
msgid "Automatic reconfiguration"
msgstr "自动重新配置"
#: ../../standalone/net_monitor:1
#, c-format
msgid "Receiving Speed:"
msgstr "接收速度:"
#: ../../lang.pm:1
#, c-format
msgid "Turks and Caicos Islands"
msgstr "特克斯和凯科斯群岛"
#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "<- Previous"
msgstr "<- 上一步"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Transfer Now"
msgstr ""
" 现在 \n"
"传送"
#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Set root password and network authentication methods"
msgstr "使用密码验证用户"
#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing configuration"
msgstr "Internet 连接共享配置"
#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Toggle between flat and group sorted"
msgstr "切换清单显示/按组排序"
#: ../../standalone/drakboot:1
#, c-format
msgid "Themes"
msgstr "主题"
#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Options: %s"
msgstr "选项: %s"
#: ../../standalone/drakboot:1
#, c-format
msgid ""
"You are currently using %s as your boot manager.\n"
"Click on Configure to launch the setup wizard."
msgstr ""
"您目前使用 %s 作为启动管理器。\n"
"单击“配置”按钮运行设置向导。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "OKI winprinter configuration"
msgstr "OKI winprinter 打印机配置"
#: ../../lang.pm:1
#, c-format
msgid "Saint Helena"
msgstr "海伦娜"
#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Security Level"
msgstr "安全级别"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"某些步骤没有完成.\n"
"\n"
"您确信要现在退出吗?"
#: ../../lang.pm:1
#, c-format
msgid "Sudan"
msgstr "苏丹"
#: ../../keyboard.pm:1
#, c-format
msgid "Polish (qwertz layout)"
msgstr "波兰 (QWERTZ 布局)"
#: ../../lang.pm:1
#, c-format
msgid "Syria"
msgstr "叙利亚"
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: ../../bootloader.pm:1
#, c-format
msgid ""
"Welcome to %s the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait %d seconds for default boot.\n"
"\n"
msgstr ""
"Welcome to %s the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait %d seconds for default boot.\n"
"\n"
#: ../../keyboard.pm:1
#, c-format
msgid "Portuguese"
msgstr "葡萄牙语"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Loopback file name: "
msgstr "回环文件名: "
#: ../../network/network.pm:1
#, c-format
msgid "DNS server address should be in format 1.2.3.4"
msgstr "DNS 服务器的格式应该是 1.2.3.4"
#: ../../keyboard.pm:1
#, c-format
msgid "Left Control key"
msgstr "左侧 Ctrl 键"
#: ../../lang.pm:1
#, c-format
msgid "Serbia"
msgstr "塞尔维亚"
#: ../../standalone/drakxtv:1
#, c-format
msgid "Newzealand"
msgstr "新西兰"
#: ../../fsedit.pm:1
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "这个目录应该保留在根分区内"
#: ../../keyboard.pm:1
#, c-format
msgid "CapsLock key"
msgstr "CapsLock 键"
#: ../../steps.pm:1
#, c-format
msgid "Install bootloader"
msgstr "安装引导程序"
#: ../../Xconfig/card.pm:1
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "请选择您显示卡上内存的大小"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Enable/Disable crontab and at for users.\n"
"\n"
"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
"and crontab(1))."
msgstr ""
"启用/禁用用户的 crontab 和 at。\n"
"\n"
"将允许的用户放在 /etc/cron.allow 和 /etc/at.allow(参看 at(1) 和 crontab(1) "
"的 man)。"
#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTIONS]\n"
"Network & Internet connection and monitoring application\n"
"\n"
"--defaultintf interface : show this interface by default\n"
"--connect : connect to internet if not already connected\n"
"--disconnect : disconnect to internet if already connected\n"
"--force : used with (dis)connect : force (dis)connection.\n"
"--status : returns 1 if connected 0 otherwise, then exit.\n"
"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
"[选项]\n"
"网络和互联网连接配置和监视程序\n"
"\n"
"--defaultintf interface : 默认显示此界面\n"
"--connect : 如果没有连接到互联网则连接\n"
"--disconnect : 如果已经连接到互联网则断开\n"
"--force : 用于连接/断开: 强制连接/断开。\n"
"--status : 如果连接则返回 1 否则返回 0, 然后退出。\n"
"--quiet : 不进行交互。用于断开连接。"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Dynamic IP Address Pool:"
msgstr "动态 IP 地址池:"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "LVM name?"
msgstr "LVM 名称?"
#: ../../standalone/service_harddrake:1
#, c-format
msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr "删除了一些“%s”类别的设备:\n"
#: ../../modules/interactive.pm:1
#, c-format
msgid "Found %s %s interfaces"
msgstr "找到 %s %s 接口"
#: ../../standalone/drakfont:1
#, c-format
msgid "Post Install"
msgstr "安装后的设定"
#: ../../standalone/drakgw:1
#, c-format
msgid "The internal domain name"
msgstr "内部域名"
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IRQ"
msgstr "网卡的 IRQ中断"
#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
msgid "logdrake"
msgstr "logdrake"
#: ../../standalone.pm:1
#, c-format
msgid ""
"Font Importation and monitoring "
"application \n"
"--windows_import : import from all available windows partitions.\n"
"--xls_fonts : show all fonts that already exist from xls\n"
"--strong : strong verification of font.\n"
"--install : accept any font file and any directry.\n"
"--uninstall : uninstall any font or any directory of font.\n"
"--replace : replace all font if already exist\n"
"--application : 0 none application.\n"
" : 1 all application available supported.\n"
" : name_of_application like so for staroffice \n"
" : and gs for ghostscript for only this one."
msgstr ""
"字体导入和监视程序\n"
"--windows_import : 从所有可用的 Windows 分区中导入字体。\n"
"--xls_fonts : 显示已经存在于 xls 中的全部字体\n"
"--strong : 强校验字体。\n"
"--install : 接受任何字体文件和任何目录。\n"
"--uninstall : 卸载任何字体或任何字体目录。\n"
"--replace : 若字体存在则替换\n"
"--application : 0 无应用程序。\n"
" : 1 支持所有应用程序。\n"
" : 应用程序名, 如 so 代表 staroffice \n"
" : gs 代表 ghostscript, 仅在此处可用。"
#: ../../standalone.pm:1
#, c-format
msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
#: ../../any.pm:1
#, c-format
msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr "选择您要制作启动盘的软盘驱动器"
#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
msgid "LILO with text menu"
msgstr "文本菜单 LILO"
#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Everything (no firewall)"
msgstr "全部 (不过滤)"
#: ../../any.pm:1
#, c-format
msgid "You must specify a kernel image"
msgstr "您必须指定一个内核映像"
#: ../../printer/main.pm:1
#, c-format
msgid ", multi-function device on USB"
msgstr ", USB 端口上的多功能设备"
#: ../../interactive/newt.pm:1
#, c-format
msgid "Do"
msgstr "执行"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Contacting the mirror to get the list of available packages..."
msgstr "正在连接镜象网站以取得可供安装程序的列表..."
#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian AZERTY (old)"
msgstr "立陶宛 AZERTY (老式)"
#: ../../keyboard.pm:1
#, c-format
msgid "Brazilian (ABNT-2)"
msgstr "巴西 (ABNT-2)"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "IP address of host/network:"
msgstr "主机/网络的 IP 地址:"
#: ../../standalone/draksplash:1
#, c-format
msgid ""
"the progress bar y coordinate\n"
"of its upper left corner"
msgstr "进度条的左上角的 Y 坐标"
#: ../../install_gtk.pm:1
#, c-format
msgid "System installation"
msgstr "系统安装"
#: ../../lang.pm:1
#, c-format
msgid "Saint Vincent and the Grenadines"
msgstr "圣文森特和格林纳丁斯"
#: ../../security/help.pm:1
#, c-format
msgid "Allow/Forbid reboot by the console user."
msgstr "允许/禁止控制台用户重新启动。"
#: ../../standalone/logdrake:1
#, c-format
msgid "/File/_Open"
msgstr "/文件(F)/打开(_O)"
#: ../../standalone/drakpxe:1
#, c-format
msgid "Location of auto_install.cfg file"
msgstr "auto_install.cfg 文件的位置"
#: ../../any.pm:1
#, c-format
msgid "Open Firmware Delay"
msgstr "打开固件延迟"
#: ../../lang.pm:1
#, c-format
msgid "Hungary"
msgstr "匈牙利"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Total progess"
msgstr "总进度"
#: ../../lang.pm:1
#, c-format
msgid "New Zealand"
msgstr "新西兰"
#: ../../standalone/net_monitor:1
#, c-format
msgid "Color configuration"
msgstr "颜色配置"
#: ../../security/level.pm:1
#, c-format
msgid ""
"There are already some restrictions, and more automatic checks are run every "
"night."
msgstr "添加了某些限制, 每天夜间自动执行更多检查。"
#: ../../standalone/drakbackup:1
#, c-format
msgid "please choose the date to restore"
msgstr "请选择需要恢复的数据"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "把 ext2 升级到 ext3"
#: ../../printer/data.pm:1
#, c-format
msgid "LPRng"
msgstr "LPRng"
#: ../../lang.pm:1
#, c-format
msgid "Netherlands Antilles"
msgstr "荷属安的列斯"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Browse to new restore repository."
msgstr "浏览新的恢复仓库。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard allows you to install local or remote printers to be used from "
"this machine and also from other machines in the network.\n"
"\n"
"It asks you for all necessary information to set up the printer and gives "
"you access to all available printer drivers, driver options, and printer "
"connection types."
msgstr ""
"\n"
"欢迎使用打印机设置向导\n"
"\n"
"此向导允许您安装本地或远程打印机, 以便在本机或网络上的其它打印机上使用。\n"
"\n"
"它会询问所有必要的信息进行打印机设置, 并允许您访问所有可用的打印机驱动程序, "
"驱动程序选项和打印机连接类型。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "and %d unknown printers"
msgstr "和 %d 台未知的打印机"
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Early Intel Pentium chips manufactured have a bug in their floating point "
"processor which did not achieve the required precision when performing a "
"Floating point DIVision (FDIV)"
msgstr ""
"早期的 Intel Pentium 芯片在浮点处理器中有错误, 导致在执行浮点除法(FDIV)时精度"
"下降"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Backup quota exceeded!\n"
"%d MB used vs %d MB allocated."
msgstr ""
"达到了备份限额!\n"
"使用了 %d MB, 而分配了 %d MB。"
#: ../../network/isdn.pm:1
#, c-format
msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr "没有探测到 ISDN PCI 卡。请在下一屏幕里挑选一种。"
#: ../../common.pm:1
#, c-format
msgid "GB"
msgstr "GB"
#: ../../any.pm:1
#, c-format
msgid "Please give a user name"
msgstr "请给出用户名"
#: ../../any.pm:1
#, c-format
msgid "Enable CD Boot?"
msgstr "允许 CD 启动?"
#: ../../interactive/stdio.pm:1
#, c-format
msgid " enter `void' for void entry"
msgstr "输入“void”如果那一项没有内容"
#: ../../standalone/drakbackup:1
#, c-format
msgid "on Hard Drive"
msgstr "在硬盘上"
#: ../../security/l10n.pm:1
#, c-format
msgid "Password history length"
msgstr "密码历史长度"
#: ../../network/netconnect.pm:1
#, c-format
msgid "Winmodem connection"
msgstr "软猫连接"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Congratulations, your printer is now installed and configured!\n"
"\n"
"You can print using the \"Print\" command of your application (usually in "
"the \"File\" menu).\n"
"\n"
"If you want to add, remove, or rename a printer, or if you want to change "
"the default option settings (paper input tray, printout quality, ...), "
"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
"Center."
msgstr ""
"\n"
"祝贺, 您的打印机已经安装配置完成!\n"
"\n"
"可以使用应用程序的 “打印” 命令(通常在 “File文件” 菜单里)。\n"
"\n"
"如果以后要添加, 删除打印机, 改变打印机名字, 或者需要修改默认打印参数 (进纸"
"盘, 输出质量, ...), 在 Mandrake 控制中心的“硬件”部分选择“打印机”。"
#: ../../standalone/drakxtv:1
#, c-format
msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr "您现在可以在 X 中运行 xawtv 看电视了!\n"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Not enough swap space to fulfill installation, please add some"
msgstr "交换空间太少, 无法完成安装, 请扩大交换分区。"
#. -PO: example: lilo-graphic on /dev/hda1
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "%s on %s"
msgstr "位于 %2$s 上的 %1$s"
#: ../../security/help.pm:1
#, c-format
msgid "Allow/Forbid remote root login."
msgstr "允许/禁止远程 root 登录。"
#: ../../help.pm:1
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same timezone. This is useful when the machine\n"
"also hosts another operating system like Windows.\n"
"\n"
"The \"%s\" option will automatically regulate the clock by connecting to a\n"
"remote time server on the Internet. For this feature to work, you must have\n"
"a working Internet connection. It is best to choose a time server located\n"
"near you. This option actually installs a time server that can used by\n"
"other machines on your local network as well."
msgstr ""
"GNU/Linux 以 GMT(格林尼治标准时)管理时间, 并会根据您所选的时区将其转换为地\n"
"方时。如果您主板上的时间是地方时, 您可能想要禁用此选项, 只需取消“%s\n"
"”选项, 这样 GNU/Linux 就会知道系统时钟和硬件时钟在同一时区。如\n"
"果在这台电脑上还要安装像 Windows 这样的其它操作系统, 就得这样设置。\n"
"\n"
"“%s”选项会连接到 Internet 上的标准时间服务器来校准系统时间。要完成\n"
"这一功能, 您需要有可用的网络连接。当然, 选择离您最近的时间服务器是最好的。\n"
"此选项实际上还将在您的计算机上安装时间服务器, 这样局域网中的计算机也可使用\n"
"此功能了。"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Which is your timezone?"
msgstr "您所在的时区?"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Can't create log file!"
msgstr "无法创建日志文件!"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Use .backupignore files"
msgstr "使用 .backupignore 文件"
#: ../../lang.pm:1
#, c-format
msgid "Guinea"
msgstr "几内亚"
#: ../../network/tools.pm:1
#, c-format
msgid "The system is now connected to the Internet."
msgstr "您的系统现在正连接到 Internet。"
#: ../../lang.pm:1
#, c-format
msgid "South Georgia and the South Sandwich Islands"
msgstr "南乔治亚岛河南桑德韦奇岛"
#: ../../standalone/drakxtv:1
#, c-format
msgid "Japan (broadcast)"
msgstr "日本 (广播)"
#: ../../lang.pm:1
#, c-format
msgid "Mozambique"
msgstr "莫桑比克"
#: ../../any.pm:1
#, c-format
msgid "Icon"
msgstr "图标"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Please choose what you want to backup"
msgstr "请选择您要备份的文件"
#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 色 (8 位)"
#: ../../any.pm:1
#, c-format
msgid "Read-write"
msgstr "可读写"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Size: %s\n"
msgstr "大小: %s\n"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Hostname: "
msgstr "主机名:"
#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Add a rule"
msgstr "增加模块"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Chunk size %s\n"
msgstr "组块大小 %s\n"
#: ../../share/advertising/02-community.pl:1
#, c-format
msgid "Build the future of Linux!"
msgstr "创造 Linux 的将来!"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Local Printer"
msgstr "本机打印机"
#: ../../standalone.pm:1
#, c-format
msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
#: ../../network/netconnect.pm:1
#, c-format
msgid "ADSL connection"
msgstr "ADSL 连接"
#: ../../standalone/drakbackup:1
#, c-format
msgid "No configuration, please click Wizard or Advanced.\n"
msgstr "没有配置, 请选择向导或高级。\n"
#: ../../standalone/drakautoinst:1
#, c-format
msgid "Error!"
msgstr "错误!"
#: ../../network/netconnect.pm:1
#, c-format
msgid "cable connection detected"
msgstr "检测到有线电缆连接"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Permission denied transferring %s to %s"
msgstr "没有权限把 %s 迁移到 %s"
#: ../../standalone/harddrake2:1
#, c-format
msgid "/_Report Bug"
msgstr "/故障报告(_R)"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Resize"
msgstr "改变大小"
#: ../../lang.pm:1
#, c-format
msgid "Dominica"
msgstr "多米尼加"
#: ../../Xconfig/various.pm:1
#, c-format
msgid "Resolution: %s\n"
msgstr "分辨率: %s\n"
#: ../../install2.pm:1
#, c-format
msgid ""
"Can't access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""
"无法读取与您的内核配套的内核模块(缺少文件 %s), 通常是因为启动软盘与安装介质不"
"配套(请制作新的启动盘)"
#: ../../help.pm:1
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"请选择正确的端口。例如, \n"
"MS Windows 里的 COM1, 在 GNU/Linux 里面叫做 ttyS0。"
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "The following packages are going to be removed"
msgstr "下列软件包将要被卸载"
#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
msgid "Connect to the Internet"
msgstr "连接到互联网"
#: ../../install_interactive.pm:1
#, c-format
msgid "Use existing partitions"
msgstr "使用现存的分区"
#: ../../keyboard.pm:1
#, c-format
msgid "Canadian (Quebec)"
msgstr "加拿大 (魁北克)"
#: ../../Xconfig/various.pm:1
#, c-format
msgid "Mouse device: %s\n"
msgstr "鼠标设备: %s\n"
#: ../../standalone/drakfont:1
#, c-format
msgid "Reselect correct fonts"
msgstr "重新选择正确字体"
#: ../../help.pm:1
#, c-format
msgid ""
"Options\n"
"\n"
" Here you can choose whether you want to have your machine automatically\n"
"switch to a graphical interface at boot. Obviously, you want to check\n"
"\"%s\" if your machine is to act as a server, or if you were not successful\n"
"in getting the display configured."
msgstr ""
"选项\n"
"\n"
" 您可以再次选择是否让您的机器在启动时就切换到图形界面。显然, 如果您的机\n"
"器用做服务器, 或者您没有配置好显示, 您可能想要选中“%s”。"
#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
msgid "MandrakeExpert Corporate"
msgstr "MandrakeExpert 企业版"
#: ../../standalone.pm:1
#, c-format
msgid ""
" [everything]\n"
" XFdrake [--noauto] monitor\n"
" XFdrake resolution"
msgstr ""
" [所有内容]\n"
" XFdrake [--noauto] 显示器\n"
" XFdrake 分辨率"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Write protection"
msgstr "写保护"
#: ../../standalone/drakfont:1
#, c-format
msgid "You've not selected any font"
msgstr "您未选中任何字体"
#: ../../steps.pm:1
#, c-format
msgid "Language"
msgstr "选择语言"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer model selection"
msgstr "打印机型号选择"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr "在改变分区表 %s 的类型之后, 在这个分区上的所有资料将要被清除"
#: ../../common.pm:1
#, c-format
msgid "%d seconds"
msgstr " %d 秒"
#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "请在驱动器 %s 中插入一张空白软盘"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "A valid URI must be entered!"
msgstr "必须输入有效的 URI!"
#: ../../network/isdn.pm:1
#, c-format
msgid "Found \"%s\" interface do you want to use it ?"
msgstr "找到了“%s”接口, 您想要使用吗?"
#: ../../standalone/drakgw:1
#, c-format
msgid "Re-configure interface and DHCP server"
msgstr "重新配置网卡和 DHCP 服务器"
#: ../../harddrake/sound.pm:1
#, c-format
msgid "Sound configuration"
msgstr "声音配置"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Photo test page"
msgstr "照片测试页"
#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
msgid "Custom disk partitioning"
msgstr "定制分区"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Enter Printer Name and Comments"
msgstr "输入打印机名称和注释"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The following printers\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"下列打印机\n"
"\n"
"%s%s\n"
"直接连接在您的系统"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "type: %s"
msgstr "类型: %s"
#: ../../keyboard.pm:1
#, c-format
msgid "Slovakian (QWERTY)"
msgstr "斯洛伐克 (QWERTY 布局)"
#: ../../standalone/draksound:1
#, c-format
msgid "No Sound Card detected!"
msgstr "没有发现声卡!"
#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
msgid "Mouse Port"
msgstr "鼠标端口"
#: ../../security/l10n.pm:1
#, c-format
msgid "Check for unsecured accounts"
msgstr "检查不安全的账户"
#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"Need to restart the Display Manager for full changes to take effect. \n"
"(service dm restart - at the console)"
msgstr ""
"需要重新启动显示管理器以便所有更改生效。\n"
"(service dm restart - 控制台上)"
#: ../../standalone/logdrake:1
#, c-format
msgid "Ftp Server"
msgstr "FTP 服务器"
#: ../../lang.pm:1
#, c-format
msgid "Uganda"
msgstr "乌干达"
#: ../../standalone/drakfont:1
#, c-format
msgid "%s fonts conversion"
msgstr "%s 字体转换"
#: ../../standalone/harddrake2:1
#, c-format
msgid "the type of bus on which the mouse is connected"
msgstr "请选择您鼠标所连接的总线类型"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"As a review, DrakX will present a summary of information it has about your\n"
"system. Depending on your installed hardware, you may have some or all of\n"
"the following entries. Each entry is made up of the configuration item to\n"
"be configured, followed by a quick summary of the current configuration.\n"
"Click on the corresponding \"%s\" button to change that.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change that if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you are not in this\n"
"country, click on the \"%s\" button and choose another one. If your country\n"
"is not in the first list shown, click the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": check the current mouse configuration and click on the button to\n"
"change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to setup a new printer. The interface\n"
"presented there is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it is displayed\n"
"here. If you notice the sound card displayed is not the one that is\n"
"actually present on your system, you can click on the button and choose\n"
"another driver.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
"configure it manually.\n"
"\n"
" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
"here. You can click on \"%s\" to change the parameters associated with the\n"
"card.\n"
"\n"
" * \"%s\": If you want to configure your Internet or local network access\n"
"now.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click that\n"
"button. This should be reserved to advanced users.\n"
"\n"
" * \"%s\": here you'll be able to fine control which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""
"为了给您一个清晰的认识, DrakX 将会在此列出有关您系统的各种信息。根据您所安\n"
"装的硬件不同, 您可能看到以下几种或全部项目。每项都由可配置的选项组成, 后面\n"
"会有当前配置的预览。单击对应的“配置”按钮可以进行更改。\n"
"\n"
" *“键盘”：检查现在的键盘配置, 必要的话单击按钮进行更改。\n"
"\n"
" *“国家/地区”：检查现在的国家/地区选择。如果您并不位于该国家/地区, 请单\n"
"击按钮来选择另外一个国家/地区。\n"
"\n"
" *“时区”：默认情况下, DrakX 会根据您选择的主要语言猜测您所在的时区。但\n"
"是, 就像您可以在此选择键盘一样, 您可能选择使用中文但并不在中国。此时, 您就\n"
"可能需要单击“时区”按钮来配置正确时区的时钟。\n"
"\n"
" *“鼠标”：检查现在的鼠标配置, 必要的话单击按钮进行更改。\n"
"\n"
" *“打印机”：单击“配置”按钮会启动打印机设置向导。请参看“新手指南”来阅\n"
"读关于如何设置打印机的更多信息。在此所显示的界面和安装时所使用的界面十分类\n"
"似。\n"
"\n"
" *“声卡”：如果发现您的系统有声卡, 就会在此显示出来。如果您觉得在此显示\n"
"的声卡与您实际拥有的声卡不符的话, 就可以单击该按钮选择其它的驱动程序。\n"
"\n"
" *“图形界面”：默认情况下, DrakX 会将您的图形界面配置为“800x600”的分辨\n"
"率。如果您需要调整的话, 请单击该按钮重新配置您的图形界面。\n"
"\n"
" *“电视卡”：如果发现您的系统有电视卡, 就会在此显示出来。如果您有电视卡, \n"
"但并未被检测出来, 请单击该按钮尝试手动进行配置。\n"
"\n"
" *“ISDN 卡”：如果发现您的系统有 ISDN 卡, 就会在此显示出来。您可以单击按\n"
"钮来修改有关参数。\n"
" *“网络”：如果您想要现在配置您的 Internet 或局域网, 就可以单击该按钮。\n"
"\n"
" *“安全级别”：此项允许您重新定义上一步中设置的安全级别。\n"
" *“防火墙”：如果您计划将您的计算机连接到 Internet, 那么要保护您的电脑\n"
"免于入侵, 应该设置防火墙。请参看“新手指南”对应章节中关于防火墙的细节。\n"
"\n"
" *“引导程序”：如果您想要更改您的启动程序配置, 请单击该按钮。建议只有高\n"
"级用户才使用该功能。\n"
"\n"
" *“服务”：您可以在此控制要在计算机上运行哪些服务。如果您计划将此计算机用\n"
"作服务器, 则应该检查这一设置。"
#: ../../lang.pm:1
#, c-format
msgid "Comoros"
msgstr "科摩罗"
#: ../../standalone/drakboot:1
#, c-format
msgid "Yaboot mode"
msgstr "Yaboot 模式"
#: ../../standalone/drakxtv:1
#, c-format
msgid "USA (cable)"
msgstr "美国(有线)"
#: ../../standalone/drakboot:1
#, c-format
msgid ""
"Can't relaunch LiLo!\n"
"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
"无法重新启动 LiLo！\n"
"请在命令行以 root 身分运行“lilo”命令, 以完成 LiLo 主题安装。"
#: ../../mouse.pm:1
#, c-format
msgid "Generic 3 Button Mouse"
msgstr "普通 3 键鼠标"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Select another media to restore from"
msgstr "请选择另外的介质用以恢复"
#: ../../standalone/drakbug:1
#, c-format
msgid "Software Manager"
msgstr "软件管理器"
#: ../../interactive/stdio.pm:1
#, c-format
msgid "Re-submit"
msgstr "重新提交"
#: ../../standalone/drakbackup:1
#, c-format
msgid "CD in place - continue."
msgstr "光盘就绪 - 继续。"
#: ../../common.pm:1
#, c-format
msgid "KB"
msgstr "KB"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Network & Internet"
msgstr "网络和 Internet"
#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian \"phonetic\" QWERTY"
msgstr "立陶宛“同音”QWERTY"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Net Boot Images"
msgstr "网络启动磁盘镜像"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Sharing of local scanners"
msgstr "共享本地扫描仪"
#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr "即插即用检测失败。请明确选择一个显示器"
#: ../../services.pm:1
#, c-format
msgid "Services and deamons"
msgstr "服务和守护程序"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote host name missing!"
msgstr "未找到远程主机!"
#: ../../fsedit.pm:1
#, c-format
msgid "with /usr"
msgstr "有 /usr"
#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
msgid "Network"
msgstr "网络"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr "自动探测运行 Microsoft Windows 的机器连接的打印机"
#: ../../any.pm:1
#, c-format
msgid "This password is too simple"
msgstr "密码太简单"
#: ../../security/l10n.pm:1
#, c-format
msgid "Chkconfig obey msec rules"
msgstr "Chkconfig 遵从 msec 规则"
#: ../../keyboard.pm:1
#, c-format
msgid "Slovakian (QWERTZ)"
msgstr "斯洛伐克 (QWERTZ 布局)"
#: ../../share/advertising/06-development.pl:1
#, c-format
msgid ""
"To modify and to create in different languages such as Perl, Python, C and C+"
"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
"development environments."
msgstr ""
"用 Perl, Python, C 和 C++ 等不同语言编程从来没有这么容易, 这要感谢 GNU gcc 3 "
"和最棒的开源开发环境。"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Truly minimal install (especially no urpmi)"
msgstr "真正最小安装 (注意没有 urpmi 包管理工具)"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Use daemon"
msgstr "使用守护进程"
#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
#: ../../standalone/drakauth:1 ../../standalone/drakconnect:1
#: ../../standalone/logdrake:1
#, c-format
msgid "Authentication"
msgstr "认证"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
msgstr "把这个打印机添加到Star Office/OpenOffice.org/GIMP"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Additional CUPS servers: "
msgstr "额外的 CUPS 服务器: "
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Choose one of the auto-detected printers from the list or enter the hostname "
"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
"从自动检测到的打印机列表中选择一个, 或者在输入字段中输入主机名或 IP, 以及可选"
"的端口号 (默认是 9100)。"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Where do you want to mount %s?"
msgstr "您想把 %s 装载到哪里?"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Via Network"
msgstr "通过网络恢复"
#: ../../lang.pm:1
#, c-format
msgid "Algeria"
msgstr "阿尔及利亚"
#: ../../any.pm:1
#, c-format
msgid "Initrd-size"
msgstr "Initrd 大小"
#: ../../help.pm:1
#, c-format
msgid ""
"In the case that different servers are available for your card, with or\n"
"without 3D acceleration, you are then asked to choose the server that best\n"
"suits your needs."
msgstr ""
"如果您的显示卡支持不同的服务器, 为了选择是否要启用 3D 加速, 您应该在这里选\n"
"择符合您需要的服务器。"
#: ../../standalone/drakbackup:1
#, c-format
msgid "\tBackups use tar and gzip\n"
msgstr "\t使用 tar 和 gzip 备份\n"
#: ../../Xconfig/card.pm:1
#, c-format
msgid "2 MB"
msgstr "2 MB"
#: ../../keyboard.pm:1
#, c-format
msgid "Both Control keys simultaneously"
msgstr "同时按两个 Ctrl 键"
#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTION]...\n"
" --no-confirmation don't ask first confirmation question in "
"MandrakeUpdate mode\n"
" --no-verify-rpm don't verify packages signatures\n"
" --changelog-first display changelog before filelist in the "
"description window\n"
" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
msgstr ""
"[选项]...\n"
" --no-confirmation 不询问 MandrakeUpdate 模块中的第一个确认问题\n"
" --no-verify-rpm 不校验包签名\n"
" --changelog-first 在描述窗口中的文件列表前显示更改日志\n"
" --merge-all-rpmnew 计划合并找到的所有 .rpmnew/.rpmsave 文件"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Setting Default Printer..."
msgstr "正在设置默认打印机..."
#: ../../standalone/drakgw:1
#, c-format
msgid "Interface %s (using module %s)"
msgstr "网卡 %s (使用 %s 模块)"
#: ../../standalone/draksplash:1
#, c-format
msgid "Generating preview ..."
msgstr "正在生成预览 ..."
#: ../../network/network.pm:1
#, c-format
msgid ""
"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
"frequency), or add enough '0' (zeroes)."
msgstr ""
"频率应该有后缀 k, M 或 G(如“2.46G”代表 2.46 GHz 频率), 或者后带足够"
"的'0'(零)。"
#: ../../standalone/draksec:1
#, c-format
msgid "ignore"
msgstr "忽略"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Allow/Forbid X connections:\n"
"\n"
"- ALL (all connections are allowed),\n"
"\n"
"- LOCAL (only connection from local machine),\n"
"\n"
"- NONE (no connection)."
msgstr ""
"允许/禁止 X 连接:\n"
"\n"
"- 所有(允许所有连接),\n"
"\n"
"- 本地(只允许本地连接),\n"
"\n"
"- 无(禁止所有连接)。"
#: ../../printer/main.pm:1
#, c-format
msgid ", multi-function device on parallel port #%s"
msgstr ", 并行端口上的多功能设备 #%s"
#: ../../mouse.pm:1
#, c-format
msgid "serial"
msgstr "串行"
#: ../../harddrake/data.pm:1
#, c-format
msgid "DVD-ROM"
msgstr "DVD-ROM"
#: ../../keyboard.pm:1
#, c-format
msgid "Georgian (\"Latin\" layout)"
msgstr "格鲁吉亚(“拉丁”布局)"
#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
msgid "Get the best items with Mandrake Linux Strategic partners"
msgstr "Mandrake Linux 战略合作伙伴众星捧月"
#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
"您现在可以提供模块 %s 的参数。\n"
"注意要输入内存地址请使用 0x 前缀, 如“0x123”"
#: ../../lang.pm:1
#, c-format
msgid "Kenya"
msgstr "肯尼亚"
#: ../../share/advertising/04-configuration.pl:1
#, c-format
msgid ""
"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
"tool to fully adapt your computer to the use you make of it. Configure and "
"customize elements such as the security level, the peripherals (screen, "
"mouse, keyboard...), the Internet connection and much more!"
msgstr ""
"Mandrake Linux 9.2 为您提供了 Mandrake 控制中心, 您可用它来全面改造计算机为自"
"己所用。您可从中配置和自定义各种设置, 如安全级别、外设(屏幕、鼠标、键盘等), "
"互联网连接, 功能多多!"
#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Use ``Unmount'' first"
msgstr "请先“Unmount”"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing mtools packages..."
msgstr "正在安装 mtools 包..."
#: ../../any.pm:1
#, c-format
msgid "You must specify a root partition"
msgstr "您必须指定根目录所在分区"
#: ../../standalone/draksplash:1
#, c-format
msgid "first step creation"
msgstr "第一步创建"
#: ../../keyboard.pm:1
#, c-format
msgid "Both Shift keys simultaneously"
msgstr "同时按两个 Shift 键"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Select a scanner model"
msgstr "选择扫描仪型号"
#: ../../security/help.pm:1
#, c-format
msgid "Accept/Refuse bogus IPv4 error messages."
msgstr "允许/拒绝 bogus IPv4 错误消息。"
#: ../../printer/data.pm:1
#, c-format
msgid "LPRng - LPR New Generation"
msgstr "LPRng - 新一代LPR"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Drakbackup Configuration"
msgstr "DrakBackup 配置"
#: ../../standalone/logdrake:1
#, c-format
msgid "Save as.."
msgstr "另存为..."
#: ../../lang.pm:1
#, c-format
msgid "Korea (North)"
msgstr "朝鲜"
#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"This interface has not been configured yet.\n"
"Launch the configuration wizard in the main window"
msgstr ""
"这块网卡还没有配置过。\n"
"从主窗口启动配置向导"
#: ../../install_gtk.pm:1
#, c-format
msgid "System configuration"
msgstr "系统配置"
#: ../../any.pm:1 ../../security/l10n.pm:1
#, c-format
msgid "Autologin"
msgstr "自动登录"
#: ../../any.pm:1
#, c-format
msgid "Domain Admin Password"
msgstr "域管理员密码"
#: ../../share/advertising/05-desktop.pl:1
#, c-format
msgid ""
"Perfectly adapt your computer to your needs thanks to the 11 available "
"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
"2.2, Window Maker, ..."
msgstr ""
"完美体现计算机的魅力, 您一定可以在 11 种可完全修改的 Mandrake Linux 用户界面"
"中找到自己的最爱：KDE 3.1, GNOME 2.2, Window Maker..."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configuring printer ..."
msgstr "正在配置打印机..."
#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
"为了保证更改分区大小之后的数据完整性, 在您下次启动进入 Windows(TM) 时可能\n"
"会自动运行文件系统检查。"
#: ../../common.pm:1
#, c-format
msgid "MB"
msgstr "MB"
#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, run some checks against the rpm database."
msgstr "如果设为 yes, 就会用和 rpm 数据库冲突的方式进行一些检查。"
#: ../../lang.pm:1
#, c-format
msgid "Virgin Islands (British)"
msgstr "英属维京群岛"
#: ../../lang.pm:1
#, c-format
msgid "Bermuda"
msgstr "百慕大"
#: ../../standalone/drakfont:1
#, c-format
msgid "click here if you are sure."
msgstr "确认"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"No configuration file found \n"
"please click Wizard or Advanced."
msgstr ""
"没有找到配置文件\n"
"请单击向导或高级。"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"以下列出了在硬盘上检测到的已有 Linux 分区。您可以保留向导所作的选择, 因为\n"
"这一方案适合于大多数情况下的安装。如果您想要进行更改的话, 您必须首先定义\n"
"根分区(“/”)。不要选择太小的分区, 否则您将无法安装足够的软件。如果您想\n"
"要在单独的分区上存储您的数据, 您还可能还需要创建“/home”分区(仅当您有多\n"
"于一个 Linux 分区时才可用)。\n"
"\n"
"每个分区按“名称”、“容量的格式列出。\n"
"\n"
"“名称”的结构为：“硬盘类型”、“硬盘编号”、“分区编号”(例如“hda1”)。\n"
"\n"
"如果您的硬盘是 IDE 硬盘, 则“硬盘类型”为“hd”；如果为 SCSI 硬盘则为“sd”。\n"
"\n"
"“硬盘编号”总是跟在“hd”或“sd”后面的字符。对于 IDE 硬盘来说:\n"
"\n"
" *“a”意味着“主 IDE 控制器的主硬盘”;\n"
"\n"
" *“b”意味着“主 IDE 控制器的从硬盘”;\n"
"\n"
" *“c”意味着“从 IDE 控制器的主硬盘”;\n"
"\n"
" *“d”意味着“从 IDE 控制器的从硬盘”。\n"
"\n"
"对于 SCSI 硬盘, “a”意味着“最低的 SCSI ID”, “b”意味着“第二低的 SCSI ID”等等。"
#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
msgid "Remove"
msgstr "删除"
#: ../../lang.pm:1
#, c-format
msgid "Lesotho"
msgstr "莱索托"
#: ../../ugtk2.pm:1
#, c-format
msgid "utopia 25"
msgstr "utopia 25"
#: ../../printer/main.pm:1
#, c-format
msgid "Pipe job into a command"
msgstr "作业pipe定向到命令"
#: ../../standalone/harddrake2:1
#, c-format
msgid "new dynamic device name generated by core kernel devfs"
msgstr "内核自带的 devfs 中使用的新的动态设备名"
#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
msgid "Yes"
msgstr "是"
#: ../../lang.pm:1
#, c-format
msgid "Cote d'Ivoire"
msgstr "科特迪瓦"
#: ../../network/isdn.pm:1
#, c-format
msgid "Which protocol do you want to use?"
msgstr "您将使用哪种协议?"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Progress"
msgstr "恢复进展"
#: ../../lang.pm:1
#, c-format
msgid "Estonia"
msgstr "爱沙尼亚"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Choose the host on which the local scanners should be made available:"
msgstr "选择本地扫描仪适用的网络或主机:"
#: ../../partition_table.pm:1
#, c-format
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions."
msgstr ""
"分区表里有一段是空的, 可是我没法使用它。\n"
"唯一的办法是移动您的主分区, 把空闲部分换到与扩展分区相邻的位置。"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Channel"
msgstr "通道"
#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
msgid "Add"
msgstr "增加"
#: ../../standalone/drakgw:1
#, c-format
msgid "No Internet Connection Sharing has ever been configured."
msgstr "互联网连接共享没有配置。"
#: ../../standalone/drakbackup:1
#, c-format
msgid " Error while sending mail. \n"
msgstr "发送电子邮件出错。\n"
#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/keyboarddrake:1
#, c-format
msgid "Keyboard"
msgstr "键盘"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Insert the CD with volume label %s\n"
" in the CD drive under mount point /mnt/cdrom"
msgstr ""
"请把卷标为 %s 的光盘插入\n"
"到加载于 /mnt/cdrom 的光盘驱动器"
#: ../../network/network.pm:1
#, c-format
msgid ""
"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
"enough '0' (zeroes)."
msgstr "速度应该有后缀 k, M 或 G(如“11M”代表 11M), 或者后带足够的“0”(零)。"
#: ../../network/netconnect.pm:1
#, c-format
msgid "Choose the connection you want to configure"
msgstr "选择您想要配置的连接"
#: ../../standalone/draksec:1
#, c-format
msgid "Please wait, setting security level..."
msgstr "请稍候, 正在设置安全级别..."
#: ../../share/advertising/06-development.pl:1
#, c-format
msgid "Mandrake Linux 9.1: the ultimate development platform"
msgstr "Mandrake Linux 9.1: 终极开发平台"
#: ../../network/network.pm:1
#, c-format
msgid "Configuring network device %s"
msgstr "正在配置网络设备 %s"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "activated"
msgstr "已激活"
#: ../../standalone/drakpxe:1
#, c-format
msgid "Please choose which network interface will be used for the dhcp server."
msgstr "请选择哪个网卡将用于 DHCP 服务器。"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Finding packages to upgrade..."
msgstr "正在寻找可升级的程序..."
#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Mount point: "
msgstr "装载点:"
#: ../../standalone/drakfont:1
#, c-format
msgid "parse all fonts"
msgstr "分析所有字体"
#: ../../security/help.pm:1
#, c-format
msgid "Allow/Forbid direct root login."
msgstr "允许/禁止直接 root 登录。"
#: ../../security/help.pm:1
#, c-format
msgid " Accept/Refuse broadcasted icmp echo."
msgstr "允许/拒绝广播 ICMP 回应。"
#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "With X"
msgstr "安装 X"
#: ../../Xconfig/card.pm:1
#, c-format
msgid "Multi-head configuration"
msgstr "多显示器配置"
#: ../../standalone/drakbug:1
#, c-format
msgid "No browser available! Please install one"
msgstr "没有可用的浏览器! 请安装一个"
#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"保存修改?\n"
"当前配置是:\n"
"\n"
"%s"
#: ../../fsedit.pm:1
#, c-format
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr "您不能把 ReiserFS 用于小于 32 MB 的分区"
#: ../../services.pm:1
#, c-format
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
"rwho 协议使远程的用户可以得到运行了 rwho 后台服务的\n"
"机器上所有登录用户的清单 (类似 finger)。"
#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Domain name"
msgstr "网域名称"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Sharing of local printers"
msgstr "共享本地打印机"
#: ../../install_messages.pm:1
#, c-format
msgid "http://www.mandrakelinux.com/en/91errata.php3"
msgstr "http://www.mandrakelinux.com/en/91errata.php3"
#: ../../security/help.pm:1
#, c-format
msgid "Enable/Disable libsafe if libsafe is found on the system."
msgstr "启用/禁用 libsafe, 若在系统中发现 libsafe。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Available printers"
msgstr "可用打印机"
#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Empty"
msgstr "空"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
"You will be presented with a list of different parameters to change to get\n"
"an optimal graphical display: Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If it is not the case, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the case that different servers are available for your card, with or\n"
"without 3D acceleration, you are then asked to choose the server that best\n"
"suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"monitor connected to your machine. If it is correct, you can choose from\n"
"this list the monitor you actually have connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"hardware. Choose the one that best suits your needs (you will be able to\n"
"change that after installation though). A sample of the chosen\n"
"configuration is shown in the monitor.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
" the system will try to open a graphical screen at the desired\n"
"resolution. If you can see the message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you cannot see the message, it\n"
"means that some part of the autodetected configuration was incorrect and\n"
"the test will automatically end after 12 seconds, bringing you back to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
" Here you can choose whether you want to have your machine automatically\n"
"switch to a graphical interface at boot. Obviously, you want to check\n"
"\"%s\" if your machine is to act as a server, or if you were not successful\n"
"in getting the display configured."
msgstr ""
"X (代表 X 窗口系统)是 GNU/Linux 图形界面的核心部分。Mandrake Linux 捆绑的\n"
"所有图形环境(KDE、GNOME、AfterStep、WindowMake 等等)都依赖于该系统。\n"
"\n"
"您将会看到不同的参数列表, 以便进行图形显示选项的更改。其中包括：显示卡\n"
"\n"
" 安装程序通常可以自动检测并配置连接到计算机上的显示卡。如果不幸您的显示\n"
"卡未被检测出来, 您可以在此列表中选择您所实际使用的显示卡。\n"
"\n"
" 如果您的显示卡支持不同的服务器, 为了选择是否要启用 3D 加速, 您应该在这\n"
"里选择符合您需要的服务器。\n"
"\n"
"\n"
"\n"
"显示器\n"
"\n"
" 安装程序通常可以自动检测并配置连接到计算机上的显示器。如果不幸您的显示\n"
"器未被检测出来, 您可以在此列表中选择您所实际使用的显示器。\n"
"\n"
"\n"
"\n"
"分辨率\n"
"\n"
" 您可以在此选择分辨率和颜色深度, 但您的硬件要支持。请选择最适合您需要的\n"
"选项(您在安装完成之后仍可进行修改)。所选配置的例子会显示在显示器上。\n"
"\n"
"\n"
"\n"
"测试\n"
"\n"
" 系统将会以所选的分辨率打开图形屏幕。如果您在测试时可以看到提示, 请回答\n"
"“是”, DrakX 就会执行安装的下一步骤。如果您看不到任何提示, 这意味着自动检\n"
"测的某一部分不正确, 测试将会在 12 秒后自动结束, 这将被您带回菜单。请更改设\n"
"置, 知道您能够看到正确的图形显示为止。\n"
"\n"
"\n"
"\n"
"选项\n"
" 您可以在此选择是否想要在计算机启动的时候就切换到图形界面。显然, 如果本\n"
"机将用作服务器, 或者您的显示配置还没有成功, 您应该选择“否”。"
#: ../../standalone/draksplash:1
#, c-format
msgid "text width"
msgstr "文本宽度"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "您想把设备 %s 装载到哪里?"
#: ../../standalone/drakgw:1
#, c-format
msgid "The default lease (in seconds)"
msgstr "默认租期(以秒为单位)"
#: ../../network/netconnect.pm:1
#, fuzzy, c-format
msgid ""
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press \"%s\" to continue."
msgstr ""
"现在将配置 %s 连接。\n"
"\n"
"\n"
"按“前进”继续。"
#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Interface \"%s\""
msgstr "网卡“%s”"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "With basic documentation (recommended!)"
msgstr "安装基础文档 (建议)"
#: ../../mouse.pm:1
#, c-format
msgid "1 button"
msgstr "单键"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
"有 %d 个未知的打印机直接连接在您的系统"
#: ../../Xconfig/main.pm:1
#, c-format
msgid "Test"
msgstr "测试"
#: ../../lang.pm:1
#, c-format
msgid "Korea"
msgstr "韩国"
#: ../../interactive/stdio.pm:1
#, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "您的选择? (默认“%s”%s) "
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Raw printer"
msgstr "原始打印机"
#: ../../standalone/harddrake2:1
#, c-format
msgid "official vendor name of the cpu"
msgstr "CPU 的官方厂家名称"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Useless without Terminal Server"
msgstr "没有终端服务器就无用"
#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Vendor"
msgstr "厂家"
#: ../../standalone/drakgw:1
#, c-format
msgid "Interface %s"
msgstr "网卡 %s"
#: ../../steps.pm:1
#, c-format
msgid "Configure mouse"
msgstr "配置鼠标"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose the mount points"
msgstr "选择装载点"
#: ../../help.pm:1 ../../ugtk.pm:1 ../../standalone/drakTermServ:1
#: ../../standalone/drakfont:1
#, c-format
msgid "OK"
msgstr "确定"
#: ../../keyboard.pm:1
#, c-format
msgid "Yugoslavian (latin)"
msgstr "南斯拉夫 (拉丁)"
#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Installing"
msgstr "正在安装"
#: ../../any.pm:1
#, c-format
msgid "Launch userdrake"
msgstr "运行 Userdrake"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Is this an install or an upgrade?"
msgstr "现在要新装还是升级?"
#: ../../help.pm:1
#, c-format
msgid "ISDN card"
msgstr "内置 ISDN 卡"
#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
"To share your own knowledge and help build Linux software, join our "
"discussion forums on our \"Community\" webpages."
msgstr ""
"想与别人分享您的知识, 并帮助创造更好的 Linux 工具吗? 请加入我们的论坛。在“社"
"区”网页可以找到它"
#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Hard drive.\n"
msgstr "\t-硬盘。\n"
#: ../../help.pm:1
#, c-format
msgid ""
"This step is activated only if an old GNU/Linux partition has been found on\n"
"your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new install or an upgrade\n"
"of an existing Mandrake Linux system:\n"
"\n"
" * \"%s\": For the most part, this completely wipes out the old system. If\n"
"you wish to change how your hard drives are partitioned, or change the file\n"
"system, you should use this option. However, depending on your partitioning\n"
"scheme, you can prevent some of your existing data from being over-written.\n"
"\n"
" * \"%s\": this installation class allows you to update the packages\n"
"currently installed on your Mandrake Linux system. Your current\n"
"partitioning scheme and user data is not altered. Most of other\n"
"configuration steps remain available, similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
"仅当在您的机器上发现了旧的 GNU/Linux 分区时此步骤才会被激活。\n"
"\n"
"DrakX 现在需要知道您是想要执行新安装还是升级已有的 Mandrake Linux 系统：\n"
"\n"
" *“%s”：这种情况下, 这将完全删除旧的系统。如果您想要更改您的硬盘分区, \n"
"或者想要更改文件系统, 您就应该使用此选项。但是, 根据您的分区方案不同, 您仍\n"
"然可以保留您的部分数据不被覆盖。\n"
"\n"
" *“%s”：这一安装级别将会允许您升级您的 Mandrake Linux 系统中目前已经安\n"
"装的软件包。这样就不会更改您目前的分区方案和用户数据。大多数配置步骤仍然可\n"
"用, 就和标准安装差不多。\n"
"\n"
"使用“升级”选项适用于 Mandrake Linux 系统版本“8.1”或更高版本。我们并不\n"
"推荐您在先于“8.1”版本之前的 Mandrake Linux 上执行升级。"
#: ../../printer/main.pm:1
#, c-format
msgid "Printer on remote CUPS server"
msgstr "远程 CUPS 服务器的打印机"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr "未能从 Star Office/OpenOffice.org/GIMP 删除打印机“%s”。"
#: ../../standalone/drakfont:1
#, c-format
msgid "here if no."
msgstr "放弃"
#: ../../network/network.pm:1
#, c-format
msgid "DHCP host name"
msgstr "DHCP 主机名"
#: ../../standalone/drakgw:1
#, c-format
msgid "The maximum lease (in seconds)"
msgstr "最长租期(以秒为单位)"
#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
msgid "Please choose which serial port your mouse is connected to."
msgstr "请选择您的鼠标是连接到那个串行口。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Did it work properly?"
msgstr "工作正常?"
#: ../../fs.pm:1
#, c-format
msgid "Mount the file system read-only."
msgstr "以只读装载文件系统。"
#: ../../security/level.pm:1
#, c-format
msgid "Poor"
msgstr "低"
#: ../../security/l10n.pm:1
#, c-format
msgid "Report check result by mail"
msgstr "通过邮件报告检测结果"
#: ../../standalone/drakgw:1
#, c-format
msgid "The DHCP start range"
msgstr "DHCP 起始范围"
#: ../../lang.pm:1
#, c-format
msgid "Grenada"
msgstr "格林纳达"
#: ../../any.pm:1
#, c-format
msgid "Unsafe"
msgstr "不安全"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ", %s sectors"
msgstr ", %s 扇区"
#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
#: ../../standalone/harddrake2:1
#, c-format
msgid "No"
msgstr "否"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
"您的打印机是否为惠普或索尼出品的多功能设备(OfficeJect, PSC, 配备扫描仪的"
"LaserJet 1100/1200/1220/3200/3300, Sony IJP-V100), 惠普 PhotoSmart 或 HP "
"LaserJet 2200?"
#: ../../lang.pm:1
#, c-format
msgid "Guadeloupe"
msgstr "瓜德洛普"
#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Kannada"
msgstr "加拿大"
#: ../../standalone/drakfont:1
#, c-format
msgid "could not find any font.\n"
msgstr "找不到任何字体\n"
#: ../../standalone/keyboarddrake:1
#, c-format
msgid "Do you want the BackSpace to return Delete in console?"
msgstr "您是否想要BackSpace在控制台起 Delete 的作用?"
#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Vertical refresh rate"
msgstr "垂直刷新率"
#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
msgid "Entering step `%s'\n"
msgstr "进入步骤“%s”\n"
#: ../../lang.pm:1
#, c-format
msgid "Niger"
msgstr "尼日尔"
#: ../../mouse.pm:1
#, c-format
msgid "Logitech MouseMan"
msgstr "罗技 MouseMan"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Removing %s ..."
msgstr "正在删除 %s..."
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "No printer"
msgstr "没有打印机"
#: ../../standalone/logdrake:1
#, c-format
msgid "alert configuration"
msgstr "报警配置"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "NetWare Printer Options"
msgstr "NetWare 打印机选项"
#: ../../standalone/draksplash:1
#, c-format
msgid "%s BootSplash (%s) preview"
msgstr "%s 启动画面(%s) 预览"
#: ../../standalone/drakfloppy:1
#, c-format
msgid "General"
msgstr "常规"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing system: "
msgstr "打印系统:"
#: ../../security/l10n.pm:1
#, c-format
msgid "/etc/issue* exist"
msgstr "/etc/issue* 存在"
#: ../../steps.pm:1
#, c-format
msgid "Add a user"
msgstr "添加用户"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Network configuration (%d adapters)"
msgstr "网络配置(%d 网卡)"
#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
msgid "Mandatory package %s is missing"
msgstr "无法找到必需的软件包 %s"
#: ../../lang.pm:1
#, c-format
msgid "Philippines"
msgstr "菲律宾"
#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/gtk.pm:1
#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
#: ../../interactive/stdio.pm:1 ../../standalone/drakbackup:1
#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
#: ../../standalone/drakfloppy:1 ../../standalone/drakperm:1
#: ../../standalone/draksec:1 ../../standalone/mousedrake:1
#: ../../standalone/net_monitor:1
#, c-format
msgid "Ok"
msgstr "确定"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print Queue Name"
msgstr "打印队列名"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Do you want to use aboot?"
msgstr "您要使用 aboot 吗?"
#: ../../keyboard.pm:1
#, c-format
msgid "Belarusian"
msgstr "白俄罗斯"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
"printers.\n"
msgstr "PDQ只支持本地打印机, 远程LPD打印机, 和 Socket/TCP 打印机。\n"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Move files to the new partition"
msgstr "移动文件到新分区"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Add here the CUPS servers whose printers you want to use. You only need to "
"do this if the servers do not broadcast their printer information into the "
"local network."
msgstr ""
"在此添加您想要使用的打印机所属 CUPS 服务器。除非服务器未将其打印机信息广播到"
"局域网上, 否则您无需提供此信息。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"欢迎使用打印机设置向导\n"
"\n"
"本向导将帮助您安装连接在本机上的打印机。\n"
"\n"
"请打开本地打印机的电源, 这样系统才能自动检测到。\n"
"\n"
"一切准备就绪后请单击“下一步”。如果您不想现在设置打印机, 请单击“取消”。"
#: ../../lang.pm:1
#, c-format
msgid "Pitcairn"
msgstr "皮特克恩"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore From Catalog"
msgstr "从目录恢复"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "IDE"
msgstr "IDE"
#: ../../fs.pm:1
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "将分区 %s 加载于目录 %s 失败"
#: ../../standalone/drakboot:1
#, c-format
msgid "Lilo screen"
msgstr "Lilo 屏幕"
#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
msgid "LILO with graphical menu"
msgstr "图形菜单 LILO"
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Estimating"
msgstr "正在估计"
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "You can't unselect this package. It is already installed"
msgstr "您不可以取消选择这个软件包。 它已经安装过了"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ", printer \"%s\" on SMB/Windows server \"%s\""
msgstr ", 打印机“%s”在 SMB/Windows 服务器“%s” 上"
#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Go on anyway?"
msgstr "真的要继续?"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Looking for available packages and rebuilding rpm database..."
msgstr "正在寻找可安装的程序并重建 rpm 数据库..."
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
" DrakBackup Report \n"
msgstr ""
"\n"
" DrakBackup 报告 \n"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Does not appear to be recordable media!"
msgstr "介质不象是可以写入的!"
#: ../../modules/interactive.pm:1
#, c-format
msgid "Specify options"
msgstr "指定选项"
#: ../../lang.pm:1
#, c-format
msgid "Vanuatu"
msgstr "瓦努阿图"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "New user list:\n"
msgstr ""
"\n"
"- 用户文件:\n"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Either the server name or the server's IP must be given!"
msgstr "输入服务器名或服务器的IP!"
#: ../../any.pm:1
#, c-format
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"SILO on your system, or another operating system removes SILO, or SILO "
"doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures.\n"
"\n"
"If you want to create a bootdisk for your system, insert a floppy in the "
"first\n"
"drive and press \"Ok\"."
msgstr ""
"定制的启动盘让您能不依赖常规的启动引导程序而直接启动您的 Linux 系统。\n"
"如果您不想安装 SILO, 或者其它操作系统把 SILO 删除了, 或者\n"
" SILO 在您的硬件上不能工作, 那么这就很有用处了。\n"
"启动盘还可以和 Mandrake 修复盘配合使用, 帮助您更轻松的恢复严重故障的系统。\n"
"\n"
"如果您想要为您的系统创建一张启动盘, 请在第一个驱动器中插入一张软盘, 然后按“确"
"定”。"
#: ../../fsedit.pm:1
#, c-format
msgid "You can't use an encrypted file system for mount point %s"
msgstr "载入点 %s 不能使用用加密的文件系统"
#: ../../security/help.pm:1
#, c-format
msgid "Set the password history length to prevent password reuse."
msgstr "设置密码历史长度以避免密码重用。"
#: ../../lang.pm:1
#, c-format
msgid "Norfolk Island"
msgstr "诺福克岛"
#: ../../standalone/drakboot:1
#, c-format
msgid "Theme installation failed!"
msgstr "主题安装失败！"
#: ../../fsedit.pm:1
#, c-format
msgid "Nothing to do"
msgstr "无事可做"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Use for loopback"
msgstr "用于回环"
#: ../../standalone/drakbug:1
#, c-format
msgid "Mandrake Bug Report Tool"
msgstr "Mandrake 故障报告工具"
#: ../../network/adsl.pm:1
#, c-format
msgid "use pppoe"
msgstr "使用 pppoe"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Moving files to the new partition"
msgstr "正在移动文件到新分区"
#: ../../Xconfig/card.pm:1
#, c-format
msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "XFree %s 带有试验阶段的3D硬件加速支持"
#: ../../help.pm:1 ../../interactive.pm:1
#, c-format
msgid "Advanced"
msgstr "高级"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Transfer"
msgstr "迁移"
#: ../../keyboard.pm:1
#, c-format
msgid "Dvorak (Swedish)"
msgstr "Dvorak (瑞典)"
#: ../../standalone/drakbackup:1
#, c-format
msgid "More Options"
msgstr "更多选项"
#: ../../lang.pm:1
#, c-format
msgid "Afghanistan"
msgstr "阿富汗"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Delete Hard Drive tar files after backup to other media."
msgstr "备份到其它介质之后删除硬盘上的 tar 文件。"
#: ../../services.pm:1
#, c-format
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"cron 是一个标准的 UNIX 程序, 它可以定期的执行用户指定的程序。\n"
"vixie cron 在基本的 UNIX cron 上增加了一些特性, 包括改进的安全性, \n"
"和更强大的配置选项。"
#: ../../lang.pm:1
#, c-format
msgid "Burundi"
msgstr "布隆迪"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Add Client -->"
msgstr "添加客户 -->"
#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Read carefully!"
msgstr "请仔细阅读!"
#: ../../standalone/drakbackup:1
#, c-format
msgid "RW"
msgstr "RW"
#: ../../standalone/drakxtv:1
#, c-format
msgid ""
"Please,\n"
"type in your tv norm and country"
msgstr ""
"现在, \n"
"请输入您的电视制式和国家"
#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Port"
msgstr "端口"
#: ../../standalone/drakgw:1
#, c-format
msgid "No (experts only)"
msgstr "无 (仅对专家)"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "No kernel selected!"
msgstr "没有选择内核!"
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "Press enter to boot the selected OS, 'e' to edit the"
msgstr "Press enter to boot the selected OS, 'e' to edit the"
#: ../../standalone/drakperm:1
#, c-format
msgid "Set-GID"
msgstr "Set-GID"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "The encryption keys do not match"
msgstr "两次加密密钥不符"
#: ../../keyboard.pm:1
#, c-format
msgid "Right \"Windows\" key"
msgstr "右侧“Windows”键"
#: ../../standalone/drakbackup:1
#, c-format
msgid "CDROM / DVDROM"
msgstr "CDROM / DVDROM"
#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check empty password in /etc/shadow."
msgstr "如果设为 yes, 就会 /etc/shadow 中的空密码。"
#: ../../help.pm:1
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
"terms in it, check the \"%s\" box. If not, simply turn off your computer."
msgstr ""
"在继续之前, 您应当仔细阅读整个许可条款。整个 Mandrake Linux 发行版都受它的\n"
"约束, 如果您同意它的全部条款, 请选中“%s”复选框。否则的话, 只需关闭您的计\n"
"算机。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""
"以下是可用于当前打印机的一些打印选项: \n"
"\n"
#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Resolutions"
msgstr "分辨率"
#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandrake Linux machine.\n"
"For a powerful and dedicated firewall solution, please look to the\n"
"specialized MandrakeSecurity Firewall distribution."
msgstr ""
"drakfirewall 防火墙配置\n"
"\n"
"这个程序为您的 Mandrake Linux 机器配置个人防火墙。\n"
"如果要配置强大的专用防火墙, 请考虑使用专门的\n"
"MandrakeSecurity 防火墙发行版。"
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr "要访问此主机, 请输入您的用户名, 密码和域名"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Remove selected host"
msgstr "删除选中的主机"
#: ../../network/netconnect.pm:1
#, c-format
msgid "Network configuration"
msgstr "网络配置"
#: ../../any.pm:1
#, c-format
msgid "No sharing"
msgstr "禁止共享"
#: ../../standalone/drakperm:1
#, c-format
msgid "Move selected rule down one level"
msgstr "把选中的规则降低一级"
#: ../../common.pm:1
#, c-format
msgid "TB"
msgstr "TB"
#: ../../standalone/drakbackup:1
#, c-format
msgid "FATAL"
msgstr "严重错误"
#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"The DHCP server will allow other computer to boot using PXE in the given "
"range of address.\n"
"\n"
"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
"DHCP 服务器可以让其它电脑用 PXE 启动, 并得到指定范围内的地址。\n"
"\n"
"网络地址是 %s 而子网掩码是 %s.\n"
"\n"
#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#: ../../standalone/drakperm:1
#, c-format
msgid "Delete"
msgstr "删除"
#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(XFree) upon booting.\n"
"Would you like XFree to start when you reboot?"
msgstr ""
"我可以设定您的电脑在开机时自动进入 X Window 环境。\n"
"您希望这么做吗?"
#: ../../standalone/drakfloppy:1
#, c-format
msgid "Build the disk"
msgstr "制作启动盘"
#: ../../standalone/net_monitor:1
#, c-format
msgid "Disconnect %s"
msgstr "断开 %s"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Status:"
msgstr "状态:"
#: ../../network/network.pm:1
#, c-format
msgid "HTTP proxy"
msgstr "HTTP 代理服务器"
#: ../../standalone/logdrake:1
#, c-format
msgid "SSH Server"
msgstr "SSH 服务器"
#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Network by rsync.\n"
msgstr "\t-网络通过 rsync。\n"
#: ../../network/isdn.pm:1
#, c-format
msgid "European protocol"
msgstr "欧洲协议"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ", printer \"%s\" on server \"%s\""
msgstr ", 打印机 “%s”在服务器 “%s”上"
#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
#: ../../standalone/drakboot:1 ../../standalone/drakbug:1
#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
#: ../../standalone/draksplash:1
#, c-format
msgid "Error"
msgstr "错误"
#: ../../any.pm:1
#, c-format
msgid "allow \"su\""
msgstr "允许使用“su”指令"
#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "Australia"
msgstr "澳大利亚"
#: ../../standalone/drakfont:1
#, c-format
msgid "please wait during ttmkfdir..."
msgstr "正在运行 ttmkfdir..."
#: ../../Xconfig/card.pm:1
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "只配置“%s”%s卡"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Level"
msgstr "级别"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Change the printing system"
msgstr "修改打印系统"
#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"您的系统支持多显示器。\n"
"是否进行设置?"
#: ../../steps.pm:1
#, c-format
msgid "Configure services"
msgstr "配置服务"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Broadcast Address:"
msgstr "广播地址:"
#: ../../partition_table.pm:1
#, c-format
msgid "mount failed: "
msgstr "装载失败: "
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"the GNU/Linux kernel needs to run a calculation loop at boot time to "
"initialize a timer counter. Its result is stored as bogomips as a way to "
"\"benchmark\" the cpu."
msgstr ""
"GNU/Linux 核心需要在启动时运行计算循环以便初始化计时器。其结果将以 bogomips "
"存储, 以便作为 CPU 的衡量“基准”(Benchmark)。"
#: ../../any.pm:1
#, c-format
msgid "Image"
msgstr "映像"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr "未能添加打印机“%s”到Star Office/OpenOffice.org/GIMP"
#: ../../services.pm:1
#, c-format
msgid "Remote Administration"
msgstr "远程管理"
#: ../../modules.pm:1
#, c-format
msgid ""
"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr "2.2 的内核不支持 PCMCIA 设备, 请使用 2.4 的内核。"
#: ../../standalone/drakfont:1
#, c-format
msgid "Selected All"
msgstr "选中的所有字体"
#: ../../printer/data.pm:1
#, c-format
msgid "CUPS - Common Unix Printing System"
msgstr "CUPS - 普通Unix打印系统"
#: ../../standalone/logdrake:1
#, c-format
msgid "Webmin Service"
msgstr "Webmin 服务"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "device"
msgstr "设备"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Enter the directory to save to:"
msgstr "请输入要保存的目录:"
#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "All"
msgstr "全部"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Which printing system (spooler) do you want to use?"
msgstr "您需要使用哪种打印系统?"
#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Greece"
msgstr "希腊"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "An error occurred"
msgstr "发生一个错误"
#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"这个软件包必须进行升级。\n"
"您真的要删除它吗?"
#: ../../keyboard.pm:1
#, c-format
msgid "Tamil (Typewriter-layout)"
msgstr "泰米尔 (打字机布局)"
#: ../../security/help.pm:1
#, c-format
msgid "Use password to authenticate users."
msgstr "使用密码认证用户。"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Allow/Forbid the list of users on the system on display managers (kdm and "
"gdm)."
msgstr "允许/禁止系统中的用户列表显示在管理器(kdm或gdm)上。"
#: ../../standalone/drakautoinst:1
#, c-format
msgid "manual"
msgstr "手动"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Filename text to search for:"
msgstr "要搜索的文件名(允许通配符):"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer manufacturer, model, driver"
msgstr "打印机厂家, 型号, 驱动"
#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
"There is no medium or it is write-protected for device %s.\n"
"Please insert one."
msgstr ""
"设备 %s 介质不存在或被写保护.\n"
"请插入介质."
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"目录 %s 已经包含数据\n"
"(%s)"
#: ../../printer/main.pm:1
#, c-format
msgid "Printer on NetWare server"
msgstr "NetWare 服务器上的打印机"
#: ../../any.pm:1
#, c-format
msgid "Give the ram size in MB"
msgstr "以兆为单位给出内存大小"
#: ../../standalone/net_monitor:1
#, c-format
msgid "Disconnection from Internet complete."
msgstr "从互联网断开完成。"
#: ../../any.pm:1
#, c-format
msgid "Real name"
msgstr "真实姓名"
#: ../../standalone/drakfont:1
#, c-format
msgid "done"
msgstr "完成"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Please uncheck or remove it on next time."
msgstr "请取消选择并删除它。"
#: ../../security/level.pm:1
#, c-format
msgid "Higher"
msgstr "更高"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose the partitions you want to format"
msgstr "请选择您要格式化的分区"
#: ../../standalone/drakxtv:1
#, c-format
msgid ""
"No TV Card has been detected on your machine. Please verify that a Linux-"
"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
"没有发现您机器上有电视卡。请检查是否正确安装了 Linux 支持的视频/电视卡。\n"
"\n"
"\n"
"请您访问我们的硬件数据库:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/zh_CN/hardware.php3"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Can't find %s on %s"
msgstr "没有 %s 在 %s 上"
#: ../../keyboard.pm:1
#, c-format
msgid "Japanese 106 keys"
msgstr "日文106键盘"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "This will take a few minutes."
msgstr "这将花费几分钟。"
#: ../../lang.pm:1
#, c-format
msgid "Burkina Faso"
msgstr "布基纳法索"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Use scanners on remote computers"
msgstr "在远程计算机上使用扫描仪"
#: ../../standalone/drakperm:1
#, c-format
msgid "Delete selected rule"
msgstr "删除选中的规则"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Accessing printers on remote CUPS servers"
msgstr "正在访问远程 CUPS 服务器上的打印机"
#: ../../any.pm:1
#, c-format
msgid "Insert a floppy in %s"
msgstr "请插入一张软盘到驱动器 %s"
#: ../../lang.pm:1
#, c-format
msgid "Maldives"
msgstr "马尔代夫"
#: ../../any.pm:1
#, c-format
msgid "compact"
msgstr "紧凑"
#: ../../common.pm:1
#, c-format
msgid "1 minute"
msgstr "1 分钟"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "type: fat"
msgstr "类型: fat"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "on channel %d id %d\n"
msgstr "通道 %d id %d\n"
#: ../../printer/main.pm:1
#, c-format
msgid ", multi-function device"
msgstr ", 多功能设备"
#: ../../lang.pm:1
#, c-format
msgid "Laos"
msgstr "老挝"
#: ../../security/help.pm:1
#, c-format
msgid "Activate/Disable ethernet cards promiscuity check."
msgstr "激活/禁用以太网卡混用检查。"
#: ../../install_interactive.pm:1
#, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr "没有 FAT 分区用来调整大小(或者没有足够剩余空间)"
#: ../../standalone/drakperm:1
#, c-format
msgid "Up"
msgstr ""
#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Firewall"
msgstr "防火墙"
#: ../../standalone/drakxtv:1
#, c-format
msgid "Area:"
msgstr "地区:"
#: ../../harddrake/data.pm:1
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr "(E)IDE/ATA 控制器"
#: ../../fs.pm:1
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr "所有到文件系统的输入/输出都应该是同步完成的。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer Server"
msgstr "打印机服务器"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Custom configuration"
msgstr "自定义配置"
#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"Please indicate where the installation image will be available.\n"
"\n"
"If you do not have an existing directory, please copy the CD or DVD "
"contents.\n"
"\n"
msgstr ""
"请指定在哪里可以找到安装镜像。\n"
"\n"
"如果您还没有这个目录, 请复制 CD 或 DVD 的内容。\n"
"\n"
#: ../../lang.pm:1
#, c-format
msgid "Saint Pierre and Miquelon"
msgstr "圣皮埃尔岛及密克隆岛"
#: ../../standalone/draksplash:1
#, c-format
msgid "saving Bootsplash theme..."
msgstr "保存开机画面主题..."
#: ../../lang.pm:1
#, c-format
msgid "Portugal"
msgstr "葡萄牙"
#: ../../modules/interactive.pm:1
#, c-format
msgid "Do you have another one?"
msgstr "您有其它的吗?"
#: ../../printer/main.pm:1
#, c-format
msgid ", printing to %s"
msgstr ", 打印到 %s"
#: ../../network/network.pm:1
#, c-format
msgid "Assign host name from DHCP address"
msgstr "从 DHCP 地址指定主机名"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Toggle to normal mode"
msgstr "切换到正常模式"
#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
msgid "Generic"
msgstr "通用"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "柱面 %d 到 %d\n"
#: ../../standalone/drakconnect:1
#, c-format
msgid "New profile..."
msgstr "新建配置文件..."
#: ../../standalone/draksec:1
#, c-format
msgid "NONE"
msgstr "无"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Which disk do you want to move it to?"
msgstr "您想移动到哪个盘?"
#: ../../standalone/draksplash:1
#, c-format
msgid "Display logo on Console"
msgstr "在控制台显示 LOGO"
#: ../../any.pm:1
#, c-format
msgid "Windows Domain"
msgstr "Windows 域"
#: ../../keyboard.pm:1
#, c-format
msgid "Saami (norwegian)"
msgstr "Saami (挪威)"
#: ../../standalone/drakpxe:1
#, c-format
msgid "Interface %s (on network %s)"
msgstr "网卡 %s (在网络 %s 上)"
#: ../../standalone/drakbackup:1
#, c-format
msgid "INFO"
msgstr "INFO - 信息"
#: ../../lang.pm:1
#, c-format
msgid "Wallis and Futuna"
msgstr "瓦利斯和富图纳群岛"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Need to create /etc/dhcpd.conf first!"
msgstr "需要先创建 /etc/dhcpd.conf 文件!"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Is FPU present"
msgstr "FPU 存在"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "There are no scanners found which are available on your system.\n"
msgstr "没有发现扫描仪直接连接在您的机器上。\n"
#: ../../services.pm:1
#, c-format
msgid ""
"No additional information\n"
"about this service, sorry."
msgstr "没有该服务的附加信息。"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Build Single NIC -->"
msgstr "建造单独的网卡 -->"
#: ../../lang.pm:1
#, c-format
msgid "Marshall Islands"
msgstr "马绍尔群岛"
#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Is this correct?"
msgstr "这样正确吗?"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Windows (FAT32)"
msgstr "Windows (FAT32)"
#: ../../steps.pm:1
#, c-format
msgid "Root password"
msgstr "Root 密码"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Build All Kernels -->"
msgstr "建造全部内核 -->"
#: ../../standalone/drakbackup:1
#, c-format
msgid "DVDRAM device"
msgstr "DVDRAM 设备"
#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, report unowned files."
msgstr "如果设为 yes, 就会报告无主文件。"
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
"<span foreground=\"royalblue3\">Version:</span> %s\n"
"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud <tvignaud"
"\\@mandrakesoft.com>\n"
"\n"
msgstr ""
"这是 HardDrake, Mandrake 的硬件设置工具。\n"
"<span foreground=\"royalblue3\">版本:</span> %s\n"
"<span foreground=\"royalblue3\">作者:</span> Thierry Vignaud <tvignaud"
"\\@mandrakesoft.com>\n"
"\n"
#: ../../install_interactive.pm:1
#, c-format
msgid ""
"You don't have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"您还没有交换分区\n"
"\n"
"要继续吗?"
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Version: "
msgstr "版本: "
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Server IP missing!"
msgstr "缺少服务器 IP!"
#: ../../lang.pm:1
#, c-format
msgid "Suriname"
msgstr "苏里南"
#: ../../any.pm:1
#, c-format
msgid "Enable ACPI"
msgstr "启用 ACPI"
#: ../../help.pm:1
#, c-format
msgid "Graphical Environment"
msgstr "图形环境"
#: ../../lang.pm:1
#, c-format
msgid "Gibraltar"
msgstr "直布罗陀"
#: ../../standalone/drakbackup:1
#, c-format
msgid "on Tape Device"
msgstr "在磁带机上"
#: ../../network/modem.pm:1
#, c-format
msgid "Do nothing"
msgstr "什么也不做"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Delete Client"
msgstr "删除客户"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Filesystem type: "
msgstr "文件系统类型: "
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Starting network..."
msgstr "正在启动网络..."
#: ../../lang.pm:1
#, c-format
msgid "Vietnam"
msgstr "越南"
#: ../../standalone/harddrake2:1
#, c-format
msgid "/_Fields description"
msgstr "/描述(_F)"
#: ../../share/advertising/10-security.pl:1
#, c-format
msgid "Optimize your security by using Mandrake Linux"
msgstr "使用 Mandrake Linux 改善安全性"
#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
#: ../../standalone/harddrake2:1
#, c-format
msgid "Help"
msgstr "帮助"
#: ../../security/l10n.pm:1
#, c-format
msgid "Check if the network devices are in promiscuous mode"
msgstr "检查网络设备是否工作在混乱状态下"
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Your personal phone number"
msgstr "您自己的电话号码"
#: ../../install_interactive.pm:1
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "您将保留多少空间给 Windows?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""
"测试页已经发送到打印机。\n"
"打印机开始工作之前可能要等一段时间。\n"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Username required"
msgstr "需要用户名"
#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
msgid "Device"
msgstr "设备: "
#: ../../help.pm:1
#, c-format
msgid ""
"Depending on the default language you chose in Section , DrakX will\n"
"automatically select a particular type of keyboard configuration. However,\n"
"you may not have a keyboard that corresponds exactly to your language: for\n"
"example, if you are an English speaking Swiss person, you may have a Swiss\n"
"keyboard. Or if you speak English but are located in Quebec, you may find\n"
"yourself in the same situation where your native language and keyboard do\n"
"not match. In either case, this installation step will allow you to select\n"
"an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be presented with the complete list of\n"
"supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding that will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
"DrakX 会根据您所选择的默认语言自动选择对应的键盘配置。但是, 您可能想要选择\n"
"与您的语言不同的键盘：例如, 如果您是一个讲英语的瑞士人, 您可能用的就是瑞士\n"
"键盘。又或者, 您说英语, 但您住在魁北克, 您也会发现您的语言和键盘并不相符。\n"
"不管是那种情况, 这一安装步骤将会允许您从列表中选择对应的键盘。\n"
"\n"
"单击“%s”按钮将列出所有支持的键盘。\n"
"\n"
"如果您选择的键盘布局基于非拉丁字母, 下个对话框将允许您选择在拉丁和非拉丁布\n"
"局之间切换所用的快捷键。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "SMB (Windows 9x/NT) 打印机选项"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Valid user list changed, rewriting config file."
msgstr ""
#: ../../standalone/drakfloppy:1
#, c-format
msgid "mkinitrd optional arguments"
msgstr "mkinitrd 可选参数"
#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
"Kmail, create your documents with OpenOffice.org."
msgstr ""
"用 Mozilla 或 Konqueror 在网上冲浪, 用 Evolution 或 Kmail 阅读邮件, 用"
"OpenOffice.org 创建您的文档"
#: ../../network/isdn.pm:1
#, c-format
msgid "Protocol for the rest of the world"
msgstr "世界其它地区的协议"
#: ../../security/l10n.pm:1
#, c-format
msgid "Password minimum length and number of digit and upcase letters"
msgstr "密码的最短长度以及数字和大写字母的最少数量"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print test pages"
msgstr "打印测试页"
#: ../../Xconfig/card.pm:1
#, c-format
msgid "64 MB or more"
msgstr "64 MB 或更多"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed and on "
"laser printers with too low memory it can even not come out. In most cases "
"it is enough to print the standard test page."
msgstr ""
"请选择要打印的测试页。\n"
"注意: 在某些打印机上打印照片可能要花相当长的时间。\n"
"一般请选择标准测试页。"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Please select the device where your %s is attached"
msgstr "请选择您的 %s 所连接的设备。"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Not formatted\n"
msgstr "未格式化\n"
#: ../../standalone/draksec:1
#, c-format
msgid "Periodic Checks"
msgstr "定期检查"
#: ../../standalone/drakpxe:1
#, c-format
msgid "PXE Server Configuration"
msgstr "PXE 服务器配置"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup the system files before:"
msgstr "先备份系统文件:"
#: ../../security/level.pm:1
#, c-format
msgid ""
"This is the standard security recommended for a computer that will be used "
"to connect to the Internet as a client."
msgstr ""
"标准安全级别: \n"
"推荐在作为客户连接互联网的电脑上使用。"
#: ../../any.pm:1
#, c-format
msgid "First floppy drive"
msgstr "第一个软盘驱动器"
#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
#: ../../standalone/logdrake:1
#, c-format
msgid "/File/_Quit"
msgstr "/文件(F)/退出(_Q)"
#: ../../keyboard.pm:1
#, c-format
msgid "Dvorak"
msgstr "Dvorak"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose the new size"
msgstr "选择新的大小"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Media class"
msgstr "介质类别"
#: ../../standalone/XFdrake:1
#, c-format
msgid "You need to log out and back in again for changes to take effect"
msgstr ""
#: ../../standalone/scannerdrake:1
#, c-format
msgid "The %s is not known by this version of Scannerdrake."
msgstr "这个版本的 ScannerDrake 不支持 %s。"
#: ../../lang.pm:1
#, c-format
msgid "Faroe Islands"
msgstr "法罗群岛"
#: ../../standalone/drakfont:1
#, c-format
msgid "Restart XFS"
msgstr "重新启动 XFS"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Add host/network"
msgstr "添加主机/网络"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Model name"
msgstr "型号名称"
#: ../../lang.pm:1
#, c-format
msgid "Albania"
msgstr "阿尔巴尼亚"
#: ../../standalone/drakbackup:1
#, c-format
msgid "No CDR/DVDR in drive!"
msgstr "驱动器里没有 CDR/DVDR"
#: ../../lang.pm:1
#, c-format
msgid "British Indian Ocean Territory"
msgstr "英属印度洋地区"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Normal Mode"
msgstr "普通模式"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer connection type"
msgstr "打印机连接类型"
#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid "No network adapter on your system!"
msgstr "您系统中没有网络卡!"
#: ../../printer/main.pm:1
#, c-format
msgid "Network %s"
msgstr "网络 %s"
#: ../../keyboard.pm:1
#, c-format
msgid "Malayalam"
msgstr "德拉维"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Option %s out of range!"
msgstr "选项 %s 超出范围!"
#: ../../standalone/net_monitor:1
#, c-format
msgid "Connect %s"
msgstr "连接 %s"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Restarting CUPS..."
msgstr "正在重新启动 CUPS..."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing/Scanning/Photo Cards on \"%s\""
msgstr "在“%s”打印机上的打印/扫描/照片卡"
#: ../../install_steps.pm:1
#, c-format
msgid "Duplicate mount point %s"
msgstr "重复的装载点 %s"
#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, run chkrootkit checks."
msgstr "如果设为 yes, 就会运行 chkrootkit 检查。"
#: ../../network/tools.pm:1
#, c-format
msgid "Connection Configuration"
msgstr "连接配置"
#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Unknown|Generic"
msgstr "未知|通用"
#: ../../help.pm:1
#, c-format
msgid ""
"At the time you are installing Mandrake Linux, it is likely that some\n"
"packages have been updated since the initial release. Bugs may have been\n"
"fixed, security issues resolved. To allow you to benefit from these\n"
"updates, you are now able to download them from the Internet. Check \"%s\"\n"
"if you have a working Internet connection, or \"%s\" if you prefer to\n"
"install updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of places from which updates can be\n"
"retrieved. You should choose one nearer to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""
"在您安装 Mandrake Linux 的这个时候, 很可能有些软件包在发行之后已经更新。\n"
"有些故障已经被修正, 有些问题已经被解决。为了利用这些更新, 您最好从互联网\n"
"上下载它们。如果您的 Internet 连接已经可以使用, 选择“%s”。如果您愿意以后再\n"
"升级, 选择“%s”。\n"
"\n"
"选择“%s”将显示一个清单, 列出很多地方, 可以从那里获取更新的软件包。\n"
"请选择其中连接速度最快的一个, 通常在您所在同一个国家会快一些。\n"
"之后会出现一个可以下载的软件包清单：检查选项然后单击“%s”来获取\n"
"并安装选中的软件包, 要停止请选择“%s”。"
#: ../../lang.pm:1
#, c-format
msgid "Myanmar"
msgstr "缅甸"
#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
#: ../../standalone/draksplash:1 ../../standalone/harddrake2:1
#: ../../standalone/logdrake:1 ../../standalone/scannerdrake:1
#, c-format
msgid "Quit"
msgstr "退出"
#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Auto allocate"
msgstr "自动分配"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Check bad blocks?"
msgstr "是否检查坏磁块?"
#: ../../harddrake/data.pm:1
#, c-format
msgid "Other MultiMedia devices"
msgstr "其它多媒体设备"
#: ../../standalone/harddrake2:1
#, c-format
msgid "burner"
msgstr "刻录机"
#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
msgid "No remote machines"
msgstr "没有远程计算机"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"欢迎您使用打印机配置向导!\n"
"\n"
"这个向导将帮助您配置连接在这台电脑的打印机。\n"
"\n"
"如果您的打印机直接连在这台电脑, 请把它(们)插接到这台电脑并打开电源, 这样才能"
"对它(们)进行自动检测。\n"
"\n"
"准备好就单击“下一步”, 如果您不想现在配置打印机就单击“取消”。"
#: ../../any.pm:1
#, c-format
msgid "Authentication NIS"
msgstr "NIS 认证"
#: ../../any.pm:1
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr "没有密码不能使用“限定命令行选项”"
#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing currently enabled"
msgstr "Internet 连接共享现在已经启用"
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO_0"
msgstr "网卡 IO_0"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Disable Local Config"
msgstr "禁用本地配置"
#: ../../lang.pm:1
#, c-format
msgid "United Arab Emirates"
msgstr "阿拉伯联合酋长国"
#: ../../lang.pm:1
#, c-format
msgid "Thailand"
msgstr "泰国"
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO_1"
msgstr "网卡 IO_1"
#: ../../lang.pm:1
#, c-format
msgid "Kazakhstan"
msgstr "哈萨克斯坦"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Routers:"
msgstr "路由器:"
#: ../../standalone/drakperm:1
#, c-format
msgid "Write"
msgstr "写入"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Display all available remote CUPS printers"
msgstr "显示所有可用的远程 CUPS 打印机"
#: ../../install_steps_newt.pm:1
#, c-format
msgid "Mandrake Linux Installation %s"
msgstr "Mandrake Linux 安装 %s"
#: ../../keyboard.pm:1
#, c-format
msgid "Thai keyboard"
msgstr "泰国语键盘"
#: ../../network/modem.pm:1
#, c-format
msgid "Dialup options"
msgstr "拨号选项"
#: ../../lang.pm:1
#, c-format
msgid "Bouvet Island"
msgstr "布维岛"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "If no port is given, 631 will be taken as default."
msgstr "如果没有给出端口, 默认将会使用 631。"
#: ../../standalone/draksec:1
#, c-format
msgid ""
"Here, you can setup the security level and administrator of your machine.\n"
"\n"
"\n"
"The Security Administrator is the one who will receive security alerts if "
"the\n"
"'Security Alerts' option is set. It can be a username or an email.\n"
"\n"
"\n"
"The Security Level menu enable to select one of the six preconfigured "
"security\n"
"provided with msec. These levels range from poor security and ease of use, "
"to\n"
"paranoid config, suitable for very sensitive server applications:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
"very\n"
"easy to use security level. It should only be used for machines not "
"connected to\n"
"any network and that are not accessible to everybody.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
"security\n"
"recommended for a computer that will be used to connect to the Internet as "
"a\n"
"client.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">High</span>: There are already some\n"
"restrictions, and more automatic checks are run every night.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
"enough\n"
"to use the system as a server which can accept connections from many "
"clients. If\n"
"your machine is only a client on the Internet, you should choose a lower "
"level.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
"previous\n"
"level, but the system is entirely closed and security features are at their\n"
"maximum"
msgstr ""
"您可在此设置安全级别以及您机器的管理员。\n"
"\n"
"\n"
"安全管理员是这样一个人, 如果设置了“安全警告”选项, 他就会收到这样的安全警"
"告。\n"
"您可以设置用户名或者电子邮件。\n"
"\n"
"\n"
"安全级别菜单允许您从 msec 提供的六种预先配置的安全级别中选择一种。这些级别涵"
"盖\n"
"从易于使用的低安全性到适合非常敏感的服务器应用的苛刻配置:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">低</span>: 这种情况下非常不安全, 但却是非常"
"易\n"
"于使用的安全级别。这一安全级别应仅用于不连接到任何网络, 并且并非人人都可访问"
"的\n"
"机器。\n"
"\n"
"<span foreground=\"royalblue3\">标准</span>: 对于那些会以客户端连接到 "
"Internet\n"
"的计算机, 推荐使用本安全级别。\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">高</span>: 此安全级别已有一些限制, 并且会在"
"每\n"
"晚间执行更多的自动检查。\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">较高</span>: 假如要将系统用作将接受大量客户"
"访\n"
"问的服务器的话, 本安全级别已经足够安全了。如果您的计算机仅仅是 Internet 的客"
"户\n"
"端, 请使用较低的级别。\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">苛刻</span>: 本级别与前一级别类似, 但系统几"
"乎\n"
"完全封闭, 安全特性达到最高"
#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"请换另一片光盘!\n"
"\n"
"请在驱动器中插入标有“%s”的光盘, 然后单击“确定”。\n"
"如果您没有这张光盘, 请单击“取消”, 放弃安装这个光盘上的软件。"
#: ../../keyboard.pm:1
#, c-format
msgid "Polish"
msgstr "波兰"
#: ../../standalone/drakbug:1
#, c-format
msgid "Mandrake Online"
msgstr "Mandrake 在线"
#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Network by webdav.\n"
msgstr "\t-通过 webdav 的网络。\n"
#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr "您的系统里没有配置以太网卡。请运行硬件配置工具。"
#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
msgid "Netmask"
msgstr "子网掩码"
#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "No hard drives found"
msgstr "没有发现硬盘"
#: ../../mouse.pm:1
#, c-format
msgid "Logitech CC Series"
msgstr "罗技 CC 系列"
#: ../../mouse.pm:1
#, c-format
msgid "2 buttons"
msgstr "两键"
#: ../../network/isdn.pm:1
#, c-format
msgid "What kind is your ISDN connection?"
msgstr "您的 ISDN 连接是什么类型?"
#: ../../any.pm:1
#, c-format
msgid "Label"
msgstr "标签"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Save on floppy"
msgstr "保存入软盘"
#: ../../security/l10n.pm:1
#, c-format
msgid "Check open ports"
msgstr "检测开放的端口"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer auto-detection"
msgstr "打印机自动检测"
#: ../../network/isdn.pm:1
#, c-format
msgid "Which of the following is your ISDN card?"
msgstr "下列哪个是您的 ISDN 卡?"
#: ../../services.pm:1
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS 是常用的通过 TCP/IP 网络共享文件的协议。\n"
"这个服务提供了 NFS 服务器功能, 可以通过\n"
"/etc/exports 文件配置。"
#: ../../standalone/drakbug:1
#, c-format
msgid "Msec"
msgstr "Msec"
#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""
"=> 注意, 一个标签改变了:\n"
"%s"
#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Number of capture buffers:"
msgstr "捕获缓冲区数量:"
#: ../../interactive/stdio.pm:1
#, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr "您的选择? (0/1, 默认 %s) "
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Any partitions that have been newly defined must be formatted for use\n"
"(formatting means creating a file system).\n"
"\n"
"At this time, you may wish to reformat some already existing partitions to\n"
"erase any data they contain. If you wish to do that, please select those\n"
"partitions as well.\n"
"\n"
"Please note that it is not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
"reformat partitions containing data that you wish to keep (typically\n"
"\"/home\").\n"
"\n"
"Please be careful when selecting partitions. After formatting, all data on\n"
"the selected partitions will be deleted and you will not be able to recover\n"
"it.\n"
"\n"
"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandrake Linux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions that will be checked for\n"
"bad blocks on the disk."
msgstr ""
"新创建的分区都必须格式化才能使用(所谓格式化就是创建文件系统)。\n"
"\n"
"此时, 您可能希望重新格式化已有的分区, 以便删除其中包含的数据。如果您想要这\n"
"么做的话, 请同时选择这些分区。\n"
"\n"
"请注意, 没有必要重新格式化所有以前存在的分区。操作系统所使用的分区必须重新\n"
"格式化, 这包括“/”、“/usr”或“/var”, 而保存着数据的分区, 如“/home”, \n"
"要保留数据就不要重新格式化。\n"
"\n"
"请小心选择分区, 一旦经过格式化, 分区上的所有数据将被清除, 无法恢复。\n"
"\n"
"准备好后, 单击“下一步 ->”开始格式化分区。\n"
"\n"
"\n"
"单击“<- 上一步”选择其他分区安装 Mandrake Linux 系统。\n"
"\n"
"单击“高级”按钮可以选择要检查坏块的分区。"
#: ../../keyboard.pm:1
#, c-format
msgid "French"
msgstr "法国"
#: ../../keyboard.pm:1
#, c-format
msgid "Czech (QWERTY)"
msgstr "捷克 (QWERTY)"
#: ../../security/l10n.pm:1
#, c-format
msgid "Allow X Window connections"
msgstr "允许 X Window 连接"
#: ../../standalone/service_harddrake:1
#, c-format
msgid "Hardware probing in progress"
msgstr "硬件检测进行中"
#: ../../standalone/drakgw:1
#, c-format
msgid "Net Device"
msgstr "网络设备"
#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
msgid "Summary"
msgstr "概要"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
" (并行口: /dev/lp0, /dev/lp1, ..., 相当于 LPT1:, LPT2:, ..., 第一个 USB 设备"
"口: /dev/usb/lp0, 第二个 USB 设备口: /dev/usb/lp1, ...)."
#: ../../network/netconnect.pm:1
#, fuzzy, c-format
msgid "Next"
msgstr "下一步 ->"
#: ../../bootloader.pm:1
#, c-format
msgid "You can't install the bootloader on a %s partition\n"
msgstr "%s 分区不能安装启动引导程序\n"
#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "CHAP"
msgstr "CHAP"
#: ../../lang.pm:1
#, c-format
msgid "Puerto Rico"
msgstr "波多黎各"
#: ../../network/network.pm:1
#, c-format
msgid "(bootp/dhcp/zeroconf)"
msgstr "(bootp/dhcp/zeroconf)"
#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
"\n"
"Welcome.\n"
"\n"
"The parameters of the auto-install are available in the sections on the left"
msgstr ""
"\n"
"欢迎.\n"
"\n"
"左边列出了自动安装可用的选项"
#: ../../standalone/draksplash:1
#, c-format
msgid ""
"package 'ImageMagick' is required to be able to complete configuration.\n"
"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
"要正常工作需要软件包 ImageMagick。\n"
"请单击“确定”安装 ImageMagick 或“取消”退出"
#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian \"number row\" QWERTY"
msgstr "立陶宛“顺排”QWERTY"
#: ../../install_any.pm:1
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""
"为了能升级您的系统, 将要删除下列的软件包：%s\n"
"\n"
"\n"
"您确定要删除这些软件包吗?\n"
#: ../../lang.pm:1
#, c-format
msgid "Anguilla"
msgstr "安圭拉"
#: ../../any.pm:1
#, c-format
msgid "NIS Domain"
msgstr "NIS 网域"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- User Files:\n"
msgstr ""
"\n"
"- 用户文件:\n"
#: ../../lang.pm:1
#, c-format
msgid "Antarctica"
msgstr "南极洲"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Mount options"
msgstr "装载选项"
#: ../../lang.pm:1
#, c-format
msgid "Jamaica"
msgstr "牙买加"
#: ../../services.pm:1
#, c-format
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
"将 RAW 设备指定为块设备(如硬盘分区), \n"
"以便供 Oracle 或 DVD 播放机之类的程序使用"
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Please wait, preparing installation..."
msgstr "请稍候, 正在准备安装..."
#: ../../keyboard.pm:1
#, c-format
msgid "Czech (QWERTZ)"
msgstr "捷克 (QWERTZ)"
#: ../../network/network.pm:1
#, c-format
msgid "Track network card id (useful for laptops)"
msgstr "跟踪网卡标志(用于膝上设备)"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The port number should be an integer!"
msgstr "端口须为数字!"
#: ../../standalone/draksplash:1
#, c-format
msgid "You must choose an image file first!"
msgstr "您必须先选择一个图像文件!"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore from Hard Disk."
msgstr "从硬盘恢复"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Add to LVM"
msgstr "加入 LVM"
#: ../../network/network.pm:1
#, c-format
msgid "DNS server"
msgstr "DNS 服务器"
#: ../../lang.pm:1
#, c-format
msgid "Trinidad and Tobago"
msgstr "特立尼达和多巴哥岛"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr "LPD 和 LPRng不支持IPP打印机。\n"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Host name or IP."
msgstr "主机名或 IP。"
#: ../../fsedit.pm:1
#, c-format
msgid "simple"
msgstr "简单"
#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Clear all"
msgstr "全部清除"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "No test pages"
msgstr "没有测试页"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Adapter %s: %s"
msgstr "适配器 %s: %s"
#: ../../lang.pm:1
#, c-format
msgid "Falkland Islands (Malvinas)"
msgstr "福克兰群岛(玛尔维纳)"
#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
msgid "Boot disk creation"
msgstr "创建启动磁盘的工具"
#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Unknown model"
msgstr "未知模式"
#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check files/directories writable by everybody."
msgstr "如果设为 yes, 就会每个人都检查可写的文件/文件夹。"
#: ../../help.pm:1
#, c-format
msgid "authentication"
msgstr "认证"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup Now"
msgstr "现在备份"
#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
msgid "/_File"
msgstr "/文件(_F)"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr "从 Star Office/OpenOffice.org/GIMP 删除打印机"
#: ../../services.pm:1
#, c-format
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""
"启动内核 2.2 的数据包过滤功能, 设置防火墙\n"
"以保护您的机器不受网络攻击"
#: ../../network/ethernet.pm:1
#, c-format
msgid "Which dhcp client do you want to use ? (default is dhcp-client)"
msgstr "您想要使用哪种 DHCP 客户程序?默认的是 dhcp-client"
#: ../../keyboard.pm:1
#, c-format
msgid "Tamil (ISCII-layout)"
msgstr "泰米尔 (ISCII-布局)"
#: ../../lang.pm:1
#, c-format
msgid "Mayotte"
msgstr "马约特岛"
#: ../../security/help.pm:1
#, c-format
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr "设置 shell 命令历史大小。-1 表示没有限制"
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "%d KB\n"
msgstr "%d KB\n"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Creating auto install floppy..."
msgstr "正在创建自动安装软盘..."
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Searching for scanners ..."
msgstr "正在搜索扫描仪..."
#: ../../lang.pm:1
#, c-format
msgid "Russia"
msgstr "俄罗斯"
#: ../../steps.pm:1
#, c-format
msgid "Partitioning"
msgstr "分区"
#: ../../network/netconnect.pm:1
#, c-format
msgid "ethernet card(s) detected"
msgstr "检测到网卡"
#: ../../standalone/logdrake:1
#, c-format
msgid "Syslog"
msgstr "Syslog"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Can't create catalog!"
msgstr "无法创建 catalog!"
#: ../../share/advertising/11-mnf.pl:1
#, c-format
msgid ""
"Complete your security setup with this very easy-to-use software which "
"combines high performance components such as a firewall, a virtual private "
"network (VPN) server and client, an intrusion detection system and a traffic "
"manager."
msgstr ""
"用非常易用的软件完善您的安全设置, 请选用高性能的组件, 如防火墙, 虚拟专用网络"
"(VPN)服务器和客户端程序, 入侵监测系统和流量管理器。"
#: ../../fsedit.pm:1
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "没有足够的空闲空间供自动分配"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Set root password"
msgstr "设定 root 密码"
#: ../../security/l10n.pm:1
#, c-format
msgid "Enable IP spoofing protection"
msgstr "启用 IP 欺骗保护"
#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
"没有已知的 OSS/ALSA 替代驱动程序可以用在您的(%s)声卡上, 不过在“%s”有一个专有"
"的驱动程序。"
#: ../../standalone/drakperm:1
#, c-format
msgid "Group :"
msgstr "组 :"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "改变分区 %s 的大小之后, 这个分区上现有的所有资料将被清除"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Internet connection configuration"
msgstr "Internet 连接配置"
#: ../../security/help.pm:1
#, c-format
msgid "Add the name as an exception to the handling of password aging by msec."
msgstr "将 name 添加为 msec 处理密码年龄的例外。"
#: ../../standalone/drakxtv:1
#, c-format
msgid "Scanning for TV channels"
msgstr "搜索电视频道"
#: ../../standalone/drakbug:1
#, c-format
msgid "Kernel:"
msgstr "内核:"
#: ../../standalone/harddrake2:1
#, c-format
msgid "/_About..."
msgstr "/关于(_A)..."
#: ../../keyboard.pm:1
#, c-format
msgid "Bengali"
msgstr "孟加拉"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Preference: "
msgstr "首选项: "
#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
msgid "Services: %d activated for %d registered"
msgstr "服务: %2$d 已注册, %1$d 已激活"
#: ../../any.pm:1
#, c-format
msgid "Create a bootdisk"
msgstr "制作启动盘"
#: ../../lang.pm:1
#, c-format
msgid "Solomon Islands"
msgstr "所罗门群岛"
#: ../../standalone/mousedrake:1
#, c-format
msgid "Please test your mouse:"
msgstr "请测试您的鼠标:"
#: ../../modules/interactive.pm:1
#, c-format
msgid "(module %s)"
msgstr "(模块 %s)"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Workgroup"
msgstr "工作组"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer host name or IP"
msgstr "打印机主机名或 IP 地址"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Host Path or Module"
msgstr "主机路径和模块"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr "打印机名称可以包含字母, 数字 和 下划线"
#: ../../standalone/drakgw:1
#, c-format
msgid "Show current interface configuration"
msgstr "修改当前网络接口的配置"
#: ../../security/help.pm:1
#, c-format
msgid ""
"The argument specifies if clients are authorized to connect\n"
"to the X server from the network on the tcp port 6000 or not."
msgstr "参数指定了客户端要要通过 TCP 端口 6000 连接到 X 服务器是否要认证。"
#: ../../help.pm:1
#, c-format
msgid "Development"
msgstr "开发"
#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Done"
msgstr "完成"
#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Web Server"
msgstr "Web 服务器"
#: ../../standalone/drakbackup:1
#, c-format
msgid "\tDo not include System Files\n"
msgstr "\t不包括系统文件\n"
#: ../../lang.pm:1
#, c-format
msgid "Chile"
msgstr "智利"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The inkjet printer drivers provided by Lexmark only support local printers, "
"no printers on remote machines or print server boxes. Please connect your "
"printer to a local port or configure it on the machine where it is connected "
"to."
msgstr ""
"利盟提供的喷墨打印机驱动程序仅仅支持本地打印机, 而非远程主机或打印服务箱上的"
"打印机。请把打印机连接到您的本机端口, 或者在连接了打印机的电脑上进行配置。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Your multi-function device was configured automatically to be able to scan. "
"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
"scanner when you have more than one) from the command line or with the "
"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
"\" menu. Call also \"man scanimage\" on the command line to get more "
"information.\n"
"\n"
"Do not use \"scannerdrake\" for this device!"
msgstr ""
"您的多功能设备已经自动配置成能够扫描。要扫描, 可以使用命"
"令“scanimage”(“scanimage -d hp:%s”指定多个 扫描仪之一) 或者用图形界"
"面“xscanimage”或“xsane”。如果您使用 GIMP, 可以从“文件”/“获取”菜单的有关项目扫"
"描. 也可以使用“man scanimage”命令查看更多信息。\n"
"\n"
"不要对这个设备使用“scannerdrake扫描仪配置工具”!"
#: ../../any.pm:1
#, c-format
msgid "(already added %s)"
msgstr "(已经添加了 %s)"
#: ../../any.pm:1
#, c-format
msgid "Bootloader installation in progress"
msgstr "启动引导程序安装中"
#: ../../printer/main.pm:1
#, c-format
msgid ", using command %s"
msgstr ", 使用命令 %s"
#: ../../keyboard.pm:1
#, c-format
msgid "Alt and Shift keys simultaneously"
msgstr "同时按 Alt 和 Shift 键"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Flags"
msgstr "标志"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Add/Del Users"
msgstr "添加/删除用户"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Host/network IP address missing."
msgstr "缺少主机/网络 IP 地址。"
#: ../../standalone/drakbackup:1
#, c-format
msgid "weekly"
msgstr "每周"
#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
msgid "Settings"
msgstr "设置"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The entered host/network IP is not correct.\n"
msgstr "输入的主机/网络 IP 不正确。\n"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Create/Transfer backup keys for SSH"
msgstr ""
"创建/传送\n"
" SSH 的备份密钥"
#: ../../any.pm:1
#, c-format
msgid "Here is the full list of available countries"
msgstr "以下是所有提供的国家/地区列表"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Alternative test page (A4)"
msgstr "替换测试页 (A4)"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"如果您拥有下列所有的光盘, 单击 确定。\n"
"如果您没有任何一张, 单击 取消。\n"
"如果您缺少其中一张, 清除它的选中标记, 然后单击 确认。"
#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
msgid "Wait please"
msgstr "请稍候"
#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "PAP"
msgstr "PAP"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup user files"
msgstr "备份用户文件"
#: ../../diskdrake/dav.pm:1
#, c-format
msgid "New"
msgstr "新建"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you have to enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That is why you must choose a password that is difficult to\n"
"guess - DrakX will tell you if the password that you chose too easy. As you\n"
"can see, you are not forced to enter a password, but we strongly advise you\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise a system.\n"
"\n"
"One caveat -- do not make the password too long or complicated because you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it in. To reduce\n"
"the chance of a blind typing error you will need to enter the password\n"
"twice. If you do happen to make the same typing error twice, this\n"
"``incorrect'' password will be the one you will have use the first time you\n"
"connect.\n"
"\n"
"If you wish access to this computer to be controlled by an authentication\n"
"server, click the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you do not know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, if your computer\n"
"will never be connected to the internet or that you absolutely trust\n"
"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
"您的 GNU/Linux 系统是否安全, 现在真的是最关键的一刻：您必须输入“root”密\n"
"码。“Root”就是系统管理员, 也是唯一有权限进行升级、添加用户、更改整个系统\n"
"配置等任务的人。简单的说, “root”无所不能！这就是为什么您的密码必须很难被\n"
"别人猜到的原因 - 别担心, 如果您的密码太简单的话, DrakX 会提醒您的。正如您\n"
"所看到的一样, 您不必非得输入密码, 但是我们强烈建议您设置一个密码。如果您操\n"
"作不当的话, GNU/Linux 和其它所有的操作系统一样易于损坏。由于“root”可以逾\n"
"越所有限制, 并且无意间就可删除分区上的所有数据。所以, 当个“root”应该非常\n"
"麻烦才对。\n"
"\n"
"密码应该至少有 8 个字符, 并且混合使用字母和数字。绝对不要把“root”的密码写\n"
"下来 - 这样的密码形同虚设, 系统坏了可别怪我没提醒你。\n"
"\n"
"另外, 也不要把密码编得太长、太复杂, 否则您自己可能都会忘了。\n"
"\n"
"您输入密码时屏幕上不会显示。为了减少“盲”打造成的打字错误, 您需要输入密码\n"
"两次。如果碰巧您两次都犯了相同的打字错误, 那么这个“错误”的密码将会在您第\n"
"一次登录时生效。\n"
"\n"
"如果您想要访问本机时被认证服务器所验证, 请单击“高级”按钮。\n"
"\n"
"如果您的网络使用 LDAP、NIS 或 PDC Windows 域认证服务, 请选择对应的“认证”\n"
"类型。如果您无法确定, 请咨询您的网络管理员。\n"
"\n"
"如果您曾经遇到过遗忘密码的困扰, 您可以选择“没有密码”。当然, 这意味着您的\n"
"电脑不会连接到 Internet, 而且您相信可以访问本机的任何人。"
#: ../../security/l10n.pm:1
#, c-format
msgid "Name resolution spoofing protection"
msgstr "名称解析欺骗保护"
#: ../../help.pm:1
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level desired\n"
"for the machine. As a rule of thumb, the security level should be set\n"
"higher if the machine will contain crucial data, or if it will be a machine\n"
"directly exposed to the Internet. The trade-off of a higher security level\n"
"is generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, stay with the default option."
msgstr ""
"现在, DrakX 允许您选择本机所需要的安全级别。简单说, 如果本机将用来保存重要\n"
"数据, 或者直接暴露在 Internet 下, 应该设置较高的安全级别。但是, 较高的安全\n"
"级别是以牺牲易用性作为代价的。\n"
"\n"
"如果您不知道如何选择, 请保留默认设置。"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Load from floppy"
msgstr "从软盘载入"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The following printer was auto-detected. "
msgstr "下列打印机被自动检测到了。"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Boot Floppy"
msgstr "启动软盘"
#: ../../keyboard.pm:1
#, c-format
msgid "Norwegian"
msgstr "挪威"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Searching for new scanners ..."
msgstr "正在搜索新的扫描仪..."
#: ../../standalone/logdrake:1
#, c-format
msgid "Apache World Wide Web Server"
msgstr "Apache WWW 万维网服务器"
#: ../../standalone/harddrake2:1
#, c-format
msgid "stepping of the cpu (sub model (generation) number)"
msgstr "CPU 步进(次型号(世代))"
#: ../../standalone/drakbackup:1
#, c-format
msgid "select path to restore (instead of /)"
msgstr "选择将要恢复到的路径 (/ 除外)"
#: ../../standalone/draksplash:1
#, c-format
msgid "Configure bootsplash picture"
msgstr "配置开机画面图片"
#: ../../lang.pm:1
#, c-format
msgid "China"
msgstr "中国"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid " (Make sure that all your printers are connected and turned on).\n"
msgstr " (请确认您的打印机已经连接好并且接通了电源)。\n"
#: ../../lang.pm:1
#, c-format
msgid "Georgia"
msgstr "乔治亚"
#: ../../standalone/printerdrake:1
#, c-format
msgid "Reading data of installed printers..."
msgstr "正在读取所安装打印机的数据..."
#: ../../standalone/drakbackup:1
#, c-format
msgid " Erase Now "
msgstr " 立即清除 "
#: ../../fsedit.pm:1
#, c-format
msgid "server"
msgstr "服务器"
#: ../../install_any.pm:1
#, c-format
msgid "Insert a FAT formatted floppy in drive %s"
msgstr "请在驱动器 %s 中插入一张 FAT 格式的软盘"
#: ../../standalone/harddrake2:1
#, c-format
msgid "yes means the processor has an arithmetic coprocessor"
msgstr "“是”代表处理器有数学协处理器"
#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "请稍候...正在应用配置"
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "Welcome to GRUB the operating system chooser!"
msgstr "Welcome to GRUB the operating system chooser!"
#: ../../bootloader.pm:1
#, c-format
msgid "Grub"
msgstr "Grub"
#: ../../harddrake/data.pm:1
#, c-format
msgid "SCSI controllers"
msgstr "SCSI 控制器"
#: ../../printer/main.pm:1
#, c-format
msgid " on LPD server \"%s\", printer \"%s\""
msgstr "LPD 服务器“%s”上的打印机“%s”"
#: ../../standalone/drakedm:1
#, c-format
msgid "Choosing a display manager"
msgstr "选择其它显示管理器"
#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid "Zeroconf Host name"
msgstr "Zeroconf 主机名"
#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "IP address should be in format 1.2.3.4"
msgstr "IP 地址的格式应该是 1.2.3.4"
#: ../../lang.pm:1
#, c-format
msgid "Ecuador"
msgstr "厄瓜多尔"
#: ../../standalone/drakautoinst:1
#, c-format
msgid "Add an item"
msgstr "添加项目"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The printers on this machine are available to other computers"
msgstr "此计算机上的打印机可共享给计算机"
#: ../../standalone/drakautoinst:1
#, c-format
msgid "I can't find needed image file `%s'."
msgstr "无法找到映像文件“%s”。"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr "没有检测到声卡。请在安装之后尝试“harddrake”。"
#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535."
msgstr ""
"指定的端口无效: %s。\n"
"正确的格式是 “port/tcp” 或 “port/udp”, \n"
"其中 port 要在 1 和 65535 之间。"
#: ../../any.pm:1
#, c-format
msgid "Shell"
msgstr "Shell"
#: ../../lang.pm:1
#, c-format
msgid "Sao Tome and Principe"
msgstr "圣多美和普林西比"
#: ../../network/isdn.pm:1
#, c-format
msgid "PCI"
msgstr "PCI"
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Can't login using username %s (bad password?)"
msgstr "不能使用用户名 %s 登录 (密码错误?)"
#: ../../keyboard.pm:1
#, c-format
msgid "Azerbaidjani (latin)"
msgstr "Azerbaidjani (latin)"
#: ../../standalone/drakbug:1
#, c-format
msgid "Package not installed"
msgstr "软件包未安装"
#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
msgid "Become a MandrakeExpert"
msgstr "成为 Mandrake 专家"
#: ../../lang.pm:1
#, c-format
msgid "American Samoa"
msgstr "美属萨摩亚"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Protocol"
msgstr "协议"
#: ../../standalone/drakfont:1
#, c-format
msgid "Copy fonts on your system"
msgstr "复制系统中的字体"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Harddrake help"
msgstr "Harddrake 帮助"
#: ../../standalone/harddrake2:1
#, c-format
msgid "Bogomips"
msgstr "Bogomips"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Mandrake Terminal Server Configuration"
msgstr "Mandrake 终端服务器配置"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
" DrakBackup Report Details\n"
"\n"
"\n"
msgstr ""
"\n"
" DrakBackup 报告细节\n"
"\n"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore all backups"
msgstr "恢复所有备份"
#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid " on parallel port #%s"
msgstr " 位于并行口 #%s"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters."
msgstr "设置密码最短长度, 数字的最少个数, 大写字母的最少个数。"
#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check open ports."
msgstr "如果设为 yes, 就会检查打开的端口。"
#: ../../standalone/drakbackup:1
#, c-format
msgid "This may take a moment to erase the media."
msgstr "清空介质需要一些时间。"
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "You can't select/unselect this package"
msgstr "您不能改变这个软件包的选定"
#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
msgid "Warning"
msgstr "警告"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Other Files:\n"
msgstr ""
"\n"
"- 其它文件:\n"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote host name"
msgstr "远程主机名"
#: ../../standalone/drakconnect:1
#, c-format
msgid "deactivate now"
msgstr "现在禁用"
#: ../../any.pm:1
#, c-format
msgid "access to X programs"
msgstr "允许使用 X 应用程序"
#: ../../install_interactive.pm:1
#, c-format
msgid "Computing the size of the Windows partition"
msgstr "正在计算 Windows 分区的大小"
#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, c-format
msgid "Italy"
msgstr "意大利"
#: ../../lang.pm:1
#, c-format
msgid "Cayman Islands"
msgstr "开曼群岛"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Name of printer"
msgstr "打印机名字"
#: ../../standalone/drakgw:1
#, c-format
msgid "disable"
msgstr "禁用"
#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
msgid "error unmounting %s: %s"
msgstr "卸载 %s 出错: %s"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do it!"
msgstr "执行!"
#: ../../standalone/drakbackup:1
#, c-format
msgid "%s not responding"
msgstr "%s 没有响应"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Select model manually"
msgstr "手工选择型号"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Format"
msgstr "格式化"
#: ../../network/adsl.pm:1
#, c-format
msgid ""
"The most common way to connect with adsl is pppoe.\n"
"Some connections use pptp, a few use dhcp.\n"
"If you don't know, choose 'use pppoe'"
msgstr ""
"利用 ADSL 连接最常用的方法是 dhcp + pppoe。\n"
"不过, 确实有一些连接是只用 dhcp。\n"
"如果您没有把握就选择“pppoe”"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Various"
msgstr "变量"
#: ../../harddrake/data.pm:1
#, c-format
msgid "Zip"
msgstr "Zip 盘"
#: ../../keyboard.pm:1
#, c-format
msgid "Left Alt key"
msgstr "左侧的 Alt 键"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"\n"
"Printerdrake could not determine which model your printer %s is. Please "
"choose the correct model from the list."
msgstr ""
"\n"
"\n"
"Printerdrake 无法确定您的打印机 %s 是什么型号的。请从列表中选择正确的型号。"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""
"\n"
"标记您要迁移的打印机并单击“迁移”。"
#: ../../printer/data.pm:1
#, c-format
msgid "PDQ"
msgstr "PDQ"
#: ../../keyboard.pm:1
#, c-format
msgid "Albanian"
msgstr "阿尔巴尼亚"
#: ../../lang.pm:1
#, c-format
msgid "Lithuania"
msgstr "立陶宛"
#: ../../any.pm:1
#, c-format
msgid "Compact"
msgstr "紧凑"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Detected model: %s %s"
msgstr "检测到型号: %s %s"
#: ../../share/advertising/03-software.pl:1
#, c-format
msgid "MandrakeSoft has selected the best software for you"
msgstr "MandrakeSoft 为您精心挑选最佳软件"
#: ../../any.pm:1
#, c-format
msgid "Local files"
msgstr "本机文件"
#: ../../pkgs.pm:1
#, c-format
msgid "maybe"
msgstr "或许有用"
#: ../../lang.pm:1
#, c-format
msgid "Panama"
msgstr "巴拿马"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Can't open %s!"
msgstr "无法打开 %s!"
#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
"看来您的图形卡拥有电视输出接口。\n"
"可以配置它用帧缓冲器工作。\n"
"\n"
"您必须先把您的电视和您的图形卡连接好, 然后启动您的电脑。\n"
"然后在启动引导程序中选择“TVout”条目\n"
"\n"
"您是否要使用这个特性?"
#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
msgid "Monitor"
msgstr "显示器"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are about to set up printing to a Windows account with password. Due to "
"a fault in the architecture of the Samba client software the password is put "
"in clear text into the command line of the Samba client used to transmit the "
"print job to the Windows server. So it is possible for every user on this "
"machine to display the password on the screen by issuing commands as \"ps "
"auxwww\".\n"
"\n"
"We recommend to make use of one of the following alternatives (in all cases "
"you have to make sure that only machines from your local network have access "
"to your Windows server, for example by means of a firewall):\n"
"\n"
"Use a password-less account on your Windows server, as the \"GUEST\" account "
"or a special account dedicated for printing. Do not remove the password "
"protection from a personal account or the administrator account.\n"
"\n"
"Set up your Windows server to make the printer available under the LPD "
"protocol. Then set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""
"您将要配置使用 Windows 帐户和密码的打印。由于 Samba 客户软件的体系缺陷, 密码"
"将以明文 出现在 Samba 向 Windows 服务器发送打印任务 的命令行中。所以这个系统"
"的所有用户都可以 用下列命令看到密码,“ps auxwww”。\n"
"\n"
"我们建议您使用下面列出的替代方法之一 (所有情况 中您必须设法保证只有您的本地网"
"络的计算机 可以访问您的 Windows 服务器, 例如使用防火墙):\n"
"\n"
"使用 Windows 服务器上没有密码的帐户, 如“GUEST”帐户 或者打印专用的帐户。不要清"
"除一个普通用户的密码保护,或者取消管理员用户的密码。\n"
"\n"
"在您的 Windows 服务器上设置打印机支持 LPD 协议。然后在这个电脑上用打印机配置"
"向导按照“%s”连接方式 配置打印机。\n"
"\n"
#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "6 万 5 千色 (16 位)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Save on Hard drive on path: %s\n"
msgstr ""
"\n"
"- 保存在硬盘路径: %s\n"
#: ../../standalone/drakfont:1
#, c-format
msgid "Remove fonts on your system"
msgstr "删除系统中的字体"
#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Warning, the network adapter (%s) is already configured.\n"
"\n"
"Do you want an automatic re-configuration?\n"
"\n"
"You can do it manually but you need to know what you're doing."
msgstr ""
"警告, 网卡 (%s) 已经配置过。\n"
"\n"
"您希望自动重新配置吗?\n"
"\n"
"如果您知道怎样做, 也可以手工配置。"
#: ../../Xconfig/various.pm:1
#, c-format
msgid "Graphical interface at startup"
msgstr "启动时进入图形界面"
#: ../../network/netconnect.pm:1
#, c-format
msgid " adsl"
msgstr " adsl"
#: ../../standalone/harddrake2:1
#, c-format
msgid "format of floppies supported by the drive"
msgstr "驱动器接受的软盘格式"
#: ../../raid.pm:1
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "没有足够的分区建立 %d 级的硬盘阵列\n"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "local config: true"
msgstr "本地配置: true"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; or to view information about "
"it."
msgstr ""
"下列打印机已配置。双击打印机可更改其设置、将其设为默认打印机；或者查看相关信"
"息。"
#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
msgid "Connected"
msgstr "已连接"
#: ../../keyboard.pm:1
#, c-format
msgid "Macedonian"
msgstr "马其顿"
#: ../../lang.pm:1
#, c-format
msgid "Mali"
msgstr "马里"
#: ../../harddrake/data.pm:1
#, c-format
msgid "Bridges and system controllers"
msgstr "桥接和系统控制器"
#: ../../standalone/logdrake:1
#, c-format
msgid "/File/_Save"
msgstr "/文件(F)/保存(_S)"
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "No details"
msgstr "无详细情况"
#: ../../pkgs.pm:1
#, c-format
msgid "very nice"
msgstr "非常好"
#: ../../standalone/draksplash:1
#, c-format
msgid "Preview"
msgstr "预览"
#: ../../standalone/drakbug:1
#, c-format
msgid "Remote Control"
msgstr "远程控制"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Please select media for backup..."
msgstr "请选择使用的载体..."
#: ../../standalone/logdrake:1
#, c-format
msgid "Wrong email"
msgstr "错误邮件"
#: ../../Xconfig/various.pm:1
#, c-format
msgid "XFree86 server: %s\n"
msgstr "XFree86 服务器: %s\n"
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Allow Thin Clients"
msgstr "允许瘦客户端"
#: ../../keyboard.pm:1
#, c-format
msgid "Georgian (\"Russian\" layout)"
msgstr "格鲁吉亚(“俄语”布局)"
#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
msgid "/_Options"
msgstr "/选项(_O)"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Your printer model"
msgstr "您的打印机型号"
#: ../../any.pm:1
#, c-format
msgid ""
"\n"
"\n"
"(WARNING! You're using XFS for your root partition,\n"
"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
"because XFS needs a very large driver)."
msgstr ""
"\n"
"\n"
"(警告！您选择了使用 XFS 作为您的根分区, \n"
"很可能无法在一个 1.44 Mb 软盘上创建启动盘, \n"
"因为 XFS 需要一个很大的驱动程序)。"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Delete hard drive tar files after backup.\n"
msgstr ""
"\n"
"- 备份后删除硬盘的 tar 文件。\n"
#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"No CD or DVD image found, please copy the installation program and rpm files."
msgstr "没有发现 CD 或 DVD 映像, 请复制安装程序和 RPM 文件。"
#: ../../share/advertising/04-configuration.pl:1
#, c-format
msgid "Mandrake's multipurpose configuration tool"
msgstr "Mandrake 的多用途配置工具"
#: ../../standalone/drakbackup:1 ../../standalone/logdrake:1
#, fuzzy, c-format
msgid "Save"
msgstr "状态"
#: ../../standalone/scannerdrake:1
#, c-format
msgid "The %s is unsupported"
msgstr "扫描仪 %s 不被支持"
#: ../../services.pm:1
#, c-format
msgid "Load the drivers for your usb devices."
msgstr "载入USB设备的驱动"
#: ../../harddrake/data.pm:1
#, c-format
msgid "Disk"
msgstr "磁盘"
#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Enter a printer device URI"
msgstr "打印机设备URI"
#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
"The success of MandrakeSoft is based upon the principle of Free Software. "
"Your new operating system is the result of collaborative work of the "
"worldwide Linux Community."
msgstr ""
"MandrakeSoft 的成功植根于自由软件的原则。您的新操作系统是全世界 Linux 社团合"
"作的成果"
#: ../../lang.pm:1
#, c-format
msgid "Israel"
msgstr "以色列"
#: ../../lang.pm:1
#, c-format
msgid "French Guiana"
msgstr "法属圭亚那"
#: ../../lang.pm:1
#, c-format
msgid "default:LTR"
msgstr "default:LTR"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "A command line must be entered!"
msgstr "必须输入命令行!"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Select user manually"
msgstr "手工选择用户"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Transfer printer configuration"
msgstr "迁移打印机配置"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do you want to enable printing on the printers mentioned above?\n"
msgstr "您是否希望在上述的打印机上进行打印?\n"
#: ../../security/l10n.pm:1
#, c-format
msgid "Check additions/removals of suid root files"
msgstr "检查 suid root 文件的添加/删除"
#: ../../any.pm:1
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""
"为了在 W2K PDC 服务器的环境中正常使用, 您可能得请 W2K 管理员 运行“C:\\>net "
"localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add”并重启服务"
"器。\n"
"您还需要一个域管理员的用户名/密码以便把这个机器添加到 Windows(TM) 域。\n"
"如果网络还没有启用, Drakx 会在网络设置步骤之后尝试加入域。\n"
"如果这个设置因为什么失败了而且域认证不起作用, 启动系统之后运行“smbpasswd -j "
"域名 -U 用户%%密码”填入您的 Windows(tm) 域名和管理员的用户名/密码。\n"
"命令“wbinfo -t”会测试您的认证密码是否完好。"
#: ../../printer/main.pm:1
#, c-format
msgid "%s (Port %s)"
msgstr "%s (端口 %s)"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Use network connection to backup"
msgstr "使用网络连接作备份"
#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
msgid "Kernel version"
msgstr "内核版本"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"It is now time to specify which programs you wish to install on your\n"
"system. There are thousands of packages available for Mandrake Linux, and\n"
"to make it simpler to manage the packages have been placed into groups of\n"
"similar applications.\n"
"\n"
"Packages are sorted into groups corresponding to a particular use of your\n"
"machine. Mandrake Linux has four predefined installations available. You\n"
"can think of these installation classes as containers for various packages.\n"
"You can mix and match applications from the various groups, so a\n"
"``Workstation'' installation can still have applications from the\n"
"``Development'' group installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the applications that are in the workstation group.\n"
"\n"
" * \"%s\": if plan on using your machine for programming, choose the\n"
"appropriate packages from that group.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group. If you unselect all groups when performing a regular\n"
"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
"different options for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command line interface. The total size of this installation is about 65\n"
"megabytes.\n"
"\n"
"You can check the \"%s\" box, which is useful if you are familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you started the installation in \"%s\" mode, you can unselect all groups\n"
"to avoid installing any new package. This is useful for repairing or\n"
"updating an existing system."
msgstr ""
"现在是该指定要安装什么软件的时候了。Mandrake Linux 包含了数千应用程序, 为\n"
"了简化管理软件包, 我们将其分成了类似的应用程序组。\n"
"\n"
"程序按照您计算机的不同用途分成很多组。Mandrake 定义了四种预置的安装类型。\n"
"您可以将这些安装分类看作不同软件包的容器。您可以混合不同容器中的程序, 所以\n"
"“工作站”安装仍然可以安装“开发”容器中的程序。\n"
"\n"
" *“工作站”：如果您想要将您的计算机用作工作站, 请选择位于工作站容器中的一\n"
"个或多个应用程序。\n"
"\n"
" *“开发”：如果计划将您的计算机用作编成, 请从容器中选择对应的软件包。\n"
"\n"
" *“服务器”：如果您的机器将作为服务器, 请选择要安装的各种服务器软件。\n"
"\n"
" *“图形环境”：您可以在这里选择您喜爱的图形环境。如果您需要使用图形环境的\n"
"话, 那么一定要从这一类中选择至少一组。\n"
"\n"
"鼠标指针指到组的名字时, 会显示有个这个组的简单说明文字。如果您在正常安装模\n"
"式(与升级模式相对)中选择不要所有的组, 将会弹出一个对话框, 询问您最小安装\n"
"的选项：\n"
"\n"
" *“有 X”：安装尽量少的软件, 以建立一个可用的图形桌面。\n"
"\n"
" *“有基本文档”：安装基本系统, 加上基本的实用工具和它们的文档。适合于配置\n"
"服务器。\n"
"\n"
" *“真的最小安装”：建立一个可工作的 Linux 系统所必须的最小安装。如果使用\n"
"这种安装类型, 您将只能使用命令行界面。此安装的只需要占用 65 兆字节。\n"
"\n"
"您还可以选中“单独挑选软件包”。如果您熟悉所有的软件包, 并且希望完全控制要\n"
"要安装哪些软件, 则此选项非常有用。\n"
"\n"
"如果您开始安装时选择了“升级”模式, 您可以不选中所有的组, 这样可以避免安装\n"
"任何新的软件包。在修复或升级已有系统时这个方法会有帮助。"
#: ../../any.pm:1 ../../help.pm:1
#, c-format
msgid "Accept user"
msgstr "接受该用户"
#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
msgid "Server"
msgstr "服务器"
#: ../../keyboard.pm:1
#, c-format
msgid "Left Shift key"
msgstr "左侧 Shift 键"
#: ../../network/netconnect.pm:1
#, c-format
msgid " local network"
msgstr "局域网"
#: ../../interactive/stdio.pm:1
#, c-format
msgid "Bad choice, try again\n"
msgstr "错误的选择, 请重试\n"
#: ../../security/l10n.pm:1
#, c-format
msgid "Syslog reports to console 12"
msgstr "将系统日志报告到控制台 12 "
#: ../../diskdrake/smbnfs_gtk.pm:1
#, fuzzy, c-format
msgid "Search new servers"
msgstr "搜索服务器"
#: ../../lang.pm:1
#, c-format
msgid "Heard and McDonald Islands"
msgstr "赫德岛和麦当劳群岛"
#: ../../harddrake/sound.pm:1
#, c-format
msgid "No alternative driver"
msgstr "没有替代的驱动程序"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Toggle to expert mode"
msgstr "进入专家模式"
#: ../../printer/cups.pm:1
#, c-format
msgid "(on this machine)"
msgstr "(在这个机器上)"
#: ../../network/network.pm:1
#, c-format
msgid "Gateway address should be in format 1.2.3.4"
msgstr "网关地址的格式应该是 1.2.3.4"
#: ../../network/modem.pm:1
#, c-format
msgid ""
"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr "检测到了基于“%s”的软猫, 您是否想要安装所需的软件?"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Looking at packages already installed..."
msgstr "正在查找已经安装过的软件包..."
#: ../../standalone/drakbackup:1
#, c-format
msgid "Use Differential Backups"
msgstr "使用差异备份"
#: ../../standalone/drakconnect:1
#, c-format
msgid "Driver"
msgstr "驱动程序"
#: ../../services.pm:1
#, c-format
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr "Linuxconf在开机时会执行一些任务来维护系统配置。"
#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer on remote lpd server"
msgstr "远程 lpd 服务器的打印机"
#: ../../standalone/drakfont:1
#, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"-You can install the fonts the normal way. In rare cases, bogus fonts may "
"hang up your X Server."
msgstr ""
"安装任何字体之前请确认您有权利在自己的系统安装和使用它。\n"
"\n"
"-通常字体安装可以正常进行。但有罕见的例外, 有问题的字体会使 X 挂住。"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
"detected and installed in the bootloader menu. If this is not the case, you\n"
"can add an entry by hand in this screen. Be careful to choose the correct\n"
"parameters.\n"
"\n"
"Yaboot's main options are:\n"
"\n"
" * Init Message: a simple text message displayed before the boot prompt.\n"
"\n"
" * Boot Device: indicates where you want to place the information required\n"
"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
"to hold this information.\n"
"\n"
" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
"yaboot. The first delay is measured in seconds and at this point, you can\n"
"choose between CD, OF boot, MacOS or Linux;\n"
"\n"
" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
"After selecting Linux, you will have this delay in 0.1 second increments\n"
"before your default kernel description is selected;\n"
"\n"
" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
"at the first boot prompt.\n"
"\n"
" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
"Open Firmware at the first boot prompt.\n"
"\n"
" * Default OS: you can select which OS will boot by default when the Open\n"
"Firmware Delay expires."
msgstr ""
"Yaboot 是各种新一代 Macintosh 硬件的启动引导程序, 可以用于引导 GNU/Linux、\n"
"MacOS 和 MacOS X。通常情况下, 启动引导程序会正确检测到 MacOS 和 MacOSX, 并\n"
"将它们列在启动引导程序的菜单中。如果不是这样, 您可以在此屏幕手工输入新的选\n"
"项。请仔细检查输入的参数。\n"
"\n"
"Yaboot 的主要选项：\n"
"\n"
"\n"
" - 初始信息：启动提示前显示的简单文本信息。\n"
"\n"
"\n"
" - 引导设备：表明您想要将 GNU/Linux 启动所需信息放置在哪里。通常情况下, \n"
"您应当先设置一个自举分区来存放此信息。\n"
"\n"
"\n"
" - 开放固件延迟：不像 LILO, yaboot 中有两个延迟。您可以在此选择第一个延"
"迟, \n"
"单位是秒, 您可以在 CD、OF 启动、MacOS 或 Linux 之间选择。\n"
"\n"
"\n"
" - 核心引导延迟：此延迟与 LILO 启动延迟类似。选择 Linux 之后, 您可以在选\n"
"择默认内核描述之前等待多少个 0.1 秒。\n"
"\n"
"\n"
" - 启用CD引导?：选中此选项将允许您在第一个启动提示时选择“C”用CD启动。\n"
" - 启用OF引导?：选中此选项将允许您在第一个启动提示时选择“N”用开放固件\n"
"启动。\n"
" - 默认操作系统：您可以选择在开放固件延迟到时后默认引导哪个操作系统。"
#: ../../mouse.pm:1
#, c-format
msgid "No mouse"
msgstr "没有鼠标"
#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Germany"
msgstr "德国"
#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Austria"
msgstr "奥地利"
#: ../../standalone/drakbackup:1
#, c-format
msgid "Choose your CD/DVD media size (MB)"
msgstr "请选择您使用的 CD/DVD 介质容量(Mb)"
#: ../../security/l10n.pm:1
#, c-format
msgid "Check permissions of files in the users' home"
msgstr "检查用户主目录中文件的权限"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Run \"sndconfig\" after installation to configure your sound card"
msgstr "安装之后运行“sndconfig”来配置您的声卡"
#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Collapse Tree"
msgstr "折叠树"
#: ../../standalone/drakautoinst:1
#, c-format
msgid "Auto Install Configurator"
msgstr "自动安装配置"
#: ../../steps.pm:1
#, c-format
msgid "Configure networking"
msgstr "配置网络"
#: ../../any.pm:1
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "您希望启动引导程序安装到哪里?"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Your choice of preferred language will affect the language of the\n"
"documentation, the installer and the system in general. Select first the\n"
"region you are located in, and then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if you will\n"
"host users from Spain on your machine, select English as the default\n"
"language in the tree view and \"%s\" in the Advanced section.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several ones, or even install them all by selecting the \"%s\"\n"
"box. Selecting support for a language means translations, fonts, spell\n"
"checkers, etc. for that language will be installed. Additionally, the\n"
"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
"however that this is an experimental feature. If you select different\n"
"languages requiring different encoding the unicode support will be\n"
"installed anyway.\n"
"\n"
"To switch between the various languages installed on the system, you can\n"
"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
"language used by the entire system. Running the command as a regular user\n"
"will only change the language settings for that particular user."
msgstr ""
"您对首选语言的选择将影响文档、安装程序和系统的语言设定。请先选择您所在的地\n"
"区, 然后选择您说的语言。\n"
"\n"
"单击“高级”按钮将允许您选择要在您的系统中安装的其它语言, 因此也会安装对应\n"
"语言的系统文档和应用程序。例如, 如果希望在计算机上同时为说英语的人服务, 那\n"
"么请选择简体中文作为默认语言, 然后从高级区中选择“English”。\n"
"\n"
|