/* * options.c - handles option processing for PPP. * * Copyright (c) 1989 Carnegie Mellon University. * All rights reserved. * * Redistribution and use in source and binary forms are permitted * provided that the above copyright notice and this paragraph are * duplicated in all such forms and that any documentation, * advertising materials, and other materials related to such * distribution and use acknowledge that the software was developed * by Carnegie Mellon University. The name of the * University may not be used to endorse or promote products derived * from this software without specific prior written permission. * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. */ #define RCSID "$Id$" #include #include #include #include #include #include #include #include #include #ifdef PLUGIN #include #endif #ifdef PPP_FILTER #include #include /* XXX: To get struct pcap */ #endif #include "pppd.h" #include "pathnames.h" #if defined(ultrix) || defined(NeXT) char *strdup __P((char *)); #endif static const char rcsid[] = RCSID; struct option_value { struct option_value *next; const char *source; char value[1]; }; /* * Option variables and default values. */ #ifdef PPP_FILTER int dflag = 0; /* Tell libpcap we want debugging */ #endif int debug = 0; /* Debug flag */ int kdebugflag = 0; /* Tell kernel to print debug messages */ int default_device = 1; /* Using /dev/tty or equivalent */ char devnam[MAXPATHLEN]; /* Device name */ bool nodetach = 0; /* Don't detach from controlling tty */ bool updetach = 0; /* Detach once link is up */ int maxconnect = 0; /* Maximum connect time */ char user[MAXNAMELEN]; /* Username for PAP */ char passwd[MAXSECRETLEN]; /* Password for PAP */ bool persist = 0; /* Reopen link after it goes down */ char our_name[MAXNAMELEN]; /* Our name for authentication purposes */ bool demand = 0; /* do dial-on-demand */ char *ipparam = NULL; /* Extra parameter for ip up/down scripts */ int idle_time_limit = 0; /* Disconnect if idle for this many seconds */ int holdoff = 30; /* # seconds to pause before reconnecting */ bool holdoff_specified; /* true if a holdoff value has been given */ int log_to_fd = 1; /* send log messages to this fd too */ bool log_default = 1; /* log_to_fd is default (stdout) */ int maxfail = 10; /* max # of unsuccessful connection attempts */ char linkname[MAXPATHLEN]; /* logical name for link */ bool tune_kernel; /* may alter kernel settings */ int connect_delay = 1000; /* wait this many ms after connect script */ int req_unit = -1; /* requested interface unit */ bool multilink = 0; /* Enable multilink operation */ char *bundle_name = NULL; /* bundle name for multilink */ bool dump_options; /* print out option values */ bool dryrun; /* print out option values and exit */ char *domain; /* domain name set by domain option */ extern option_t auth_options[]; extern struct stat devstat; #ifdef PPP_FILTER struct bpf_program pass_filter;/* Filter program for packets to pass */ struct bpf_program active_filter; /* Filter program for link-active pkts */ pcap_t pc; /* Fake struct pcap so we can compile expr */ #endif char *current_option; /* the name of the option being parsed */ int privileged_option; /* set iff the current option came from root */ char *option_source; /* string saying where the option came from */ int option_priority = OPRIO_CFGFILE; /* priority of the current options */ bool devnam_fixed; /* can no longer change device name */ static int logfile_fd = -1; /* fd opened for log file */ static char logfile_name[MAXPATHLEN]; /* name of log file */ /* * Prototypes */ static int setdomain __P((char **)); static int readfile __P((char **)); static int callfile __P((char **)); static int showversion __P((char **)); static int showhelp __P((char **)); static void usage __P((void)); static int setlogfile __P((char **)); #ifdef PLUGIN static int loadplugin __P((char **)); #endif #ifdef PPP_FILTER static int setpassfilter __P((char **)); static int setactivefilter __P((char **)); #endif static option_t *find_option __P((const char *name)); static int process_option __P((option_t *, char *, char **)); static int n_arguments __P((option_t *)); static int number_option __P((char *, u_int32_t *, int)); /* * Structure to store extra lists of options. */ struct option_list { option_t *options; struct option_list *next; }; static struct option_list *extra_options = NULL; /* * Valid arguments. */ option_t general_options[] = { { "debug", o_int, &debug, "Increase debugging level", OPT_INC | OPT_NOARG | 1 }, { "-d", o_int, &debug, "Increase debugging level", OPT_ALIAS | OPT_INC | OPT_NOARG | 1 }, { "kdebug", o_int, &kdebugflag, "Set kernel driver debug level", OPT_PRIO }, { "nodetach", o_bool, &nodetach, "Don't detach from controlling tty", OPT_PRIO | 1 }, { "-detach", o_bool, &nodetach, "Don't detach from controlling tty", OPT_ALIAS | OPT_PRIOSUB | 1 }, { "updetach", o_bool, &updetach, "Detach from controlling tty once link is up", OPT_PRIOSUB | OPT_A2CLR | 1, &nodetach }, { "holdoff", o_int, &holdoff, "Set time in seconds before retrying connection", OPT_PRIO }, { "idle", o_int, &idle_time_limit, "Set time in seconds before disconnecting idle link", OPT_PRIO }, { "maxconnect", o_int, &maxconnect, "Set connection time limit", OPT_PRIO | OPT_LLIMIT | OPT_NOINCR | OPT_ZEROINF }, { "domain", o_special, (void *)setdomain, "Add given domain name to hostname", OPT_PRIO | OPT_PRIV | OPT_A2STRVAL, &domain }, { "file", o_special, (void *)readfile, "Take options from a file", OPT_NOPRINT }, { "call", o_special, (void *)callfile, "Take options from a privileged file", OPT_NOPRINT }, { "persist", o_bool, &persist, "Keep on reopening connection after close", OPT_PRIO | 1 }, { "nopersist", o_bool, &persist, "Turn off persist option", OPT_PRIOSUB }, { "demand", o_bool, &demand, "Dial on demand", OPT_INITONLY | 1, &persist }, { "--version", o_special_noarg, (void *)showversion, "Show version number" }, { "--help", o_special_noarg, (void *)showhelp, "Show brief listing of options" }, { "-h", o_special_noarg, (void *)showhelp, "Show brief listing of options", OPT_ALIAS }, { "logfile", o_special, (void *)setlogfile, "Append log messages to this file", OPT_PRIO | OPT_A2STRVAL | OPT_STATIC, &logfile_name }, { "logfd", o_int, &log_to_fd, "Send log messages to this file descriptor", OPT_PRIOSUB | OPT_A2CLR, &log_default }, { "nolog", o_int, &log_to_fd, "Don't send log messages to any file", OPT_PRIOSUB | OPT_NOARG | OPT_VAL(-1) }, { "nologfd", o_int, &log_to_fd, "Don't send log messages to any file descriptor", OPT_PRIOSUB | OPT_ALIAS | OPT_NOARG | OPT_VAL(-1) }, { "linkname", o_string, linkname, "Set logical name for link", OPT_PRIO | OPT_PRIV | OPT_STATIC, NULL, MAXPATHLEN }, { "maxfail", o_int, &maxfail, "Maximum number of unsuccessful connection attempts to allow", OPT_PRIO }, { "ktune", o_bool, &tune_kernel, "Alter kernel settings as necessary", OPT_PRIO | 1 }, { "noktune", o_bool, &tune_kernel, "Don't alter kernel settings", OPT_PRIOSUB }, { "connect-delay", o_int, &connect_delay, "Maximum time (in ms) to wait after connect script finishes", OPT_PRIO }, { "unit", o_int, &req_unit, "PPP interface unit number to use if possible", OPT_PRIO | OPT_LLIMIT, 0, 0 }, { "dump", o_bool, &dump_options, "Print out option values after parsing all options", 1 }, { "dryrun", o_bool, &dryrun, "Stop after parsing, printing, and checking options", 1 }, #ifdef HAVE_MULTILINK { "multilink", o_bool, &multilink, "Enable multilink operation", OPT_PRIO | 1 }, { "mp", o_bool, &multilink, "Enable multilink operation", OPT_PRIOSUB | OPT_ALIAS | 1 }, { "nomultilink", o_bool, &multilink, "Disable multilink operation", OPT_PRIOSUB | 0 }, { "nomp", o_bool, &multilink, "Disable multilink operation", OPT_PRIOSUB | OPT_ALIAS | 0 }, { "bundle", o_string, &bundle_name, "Bundle name for multilink", OPT_PRIO }, #endif /* HAVE_MULTILINK */ #ifdef PLUGIN { "plugin", o_special, (void *)loadplugin, "Load a plug-in module into pppd", OPT_PRIV | OPT_A2LIST }, #endif #ifdef PPP_FILTER { "pdebug", o_int, &dflag, "libpcap debugging", OPT_PRIO }, { "pass-filter", 1, setpassfilter, "set filter for packets to pass", OPT_PRIO }, { "active-filter", 1, setactivefilter, "set filter for active pkts", OPT_PRIO }, #endif { NULL } }; #ifndef IMPLEMENTATION #define IMPLEMENTATION "" #endif static char *usage_string = "\ pppd version %s\n\ Usage: %s [ options ], where options are:\n\ Communicate over the named device\n\ Set the baud rate to \n\ : Set the local and/or remote interface IP\n\ addresses. Either one may be omitted.\n\ asyncmap Set the desired async map to hex \n\ auth Require authentication from peer\n\ connect

Invoke shell command

to set up the serial line\n\ crtscts Use hardware RTS/CTS flow control\n\ defaultroute Add default route through interface\n\ file Take options from file \n\ modem Use modem control lines\n\ mru Set MRU value to for negotiation\n\ See pppd(8) for more options.\n\ "; /* * parse_args - parse a string of arguments from the command line. */ int parse_args(argc, argv) int argc; char **argv; { char *arg; option_t *opt; int n; privileged_option = privileged; option_source = "command line"; option_priority = OPRIO_CMDLINE; while (argc > 0) { arg = *argv++; --argc; opt = find_option(arg); if (opt == NULL) { option_error("unrecognized option '%s'", arg); usage(); return 0; } n = n_arguments(opt); if (argc < n) { option_error("too few parameters for option %s", arg); return 0; } if (!process_option(opt, arg, argv)) return 0; argc -= n; argv += n; } return 1; } /* * options_from_file - Read a string of options from a file, * and interpret them. */ int options_from_file(filename, must_exist, check_prot, priv) char *filename; int must_exist; int check_prot; int priv; { FILE *f; int i, newline, ret, err; option_t *opt; int oldpriv, n; char *oldsource; char *argv[MAXARGS]; char args[MAXARGS][MAXWORDLEN]; char cmd[MAXWORDLEN]; if (check_prot) seteuid(getuid()); f = fopen(filename, "r"); err = errno; if (check_prot) seteuid(0); if (f == NULL) { errno = err; if (!must_exist) { if (err != ENOENT && err != ENOTDIR) warn("Warning: can't open options file %s: %m", filename); return 1; } option_error("Can't open options file %s: %m", filename); return 0; } oldpriv = privileged_option; privileged_option = priv; oldsource = option_source; option_source = strdup(filename); if (option_source == NULL) option_source = "file"; ret = 0; while (getword(f, cmd, &newline, filename)) { opt = find_option(cmd); if (opt == NULL) { option_error("In file %s: unrecognized option '%s'", filename, cmd); goto err; } n = n_arguments(opt); for (i = 0; i < n; ++i) { if (!getword(f, args[i], &newline, filename)) { option_error( "In file %s: too few parameters for option '%s'", filename, cmd); goto err; } argv[i] = args[i]; } if (!process_option(opt, cmd, argv)) goto err; } ret = 1; err: fclose(f); privileged_option = oldpriv; option_source = oldsource; return ret; } /* * options_from_user - See if the use has a ~/.ppprc file, * and if so, interpret options from it. */ int options_from_user() { char *user, *path, *file; int ret; struct passwd *pw; size_t pl; pw = getpwuid(getuid()); if (pw == NULL || (user = pw->pw_dir) == NULL || user[0] == 0) return 1; file = _PATH_USEROPT; pl = strlen(user) + strlen(file) + 2; path = malloc(pl); if (path == NULL) novm("init file name"); slprintf(path, pl, "%s/%s", user, file); option_priority = OPRIO_CFGFILE; ret = options_from_file(path, 0, 1, privileged); free(path); return ret; } /* * options_for_tty - See if an options file exists for the serial * device, and if so, interpret options from it. * We only allow the per-tty options file to override anything from * the command line if it is something that the user can't override * once it has been set by root; this is done by giving configuration * files a lower priority than the command line. */ int options_for_tty() { char *dev, *path, *p; int ret; size_t pl; dev = devnam; if (strncmp(dev, "/dev/", 5) == 0) dev += 5; if (dev[0] == 0 || strcmp(dev, "tty") == 0) return 1; /* don't look for /etc/ppp/options.tty */ pl = strlen(_PATH_TTYOPT) + strlen(dev) + 1; path = malloc(pl); if (path == NULL) novm("tty init file name"); slprintf(path, pl, "%s%s", _PATH_TTYOPT, dev); /* Turn slashes into dots, for Solaris case (e.g. /dev/term/a) */ for (p = path + strlen(_PATH_TTYOPT); *p != 0; ++p) if (*p == '/') *p = '.'; option_priority = OPRIO_CFGFILE; ret = options_from_file(path, 0, 0, 1); free(path); return ret; } /* * options_from_list - process a string of options in a wordlist. */ int options_from_list(w, priv) struct wordlist *w; int priv; { char *argv[MAXARGS]; option_t *opt; int i, n, ret = 0; struct wordlist *w0; privileged_option = priv; option_source = "secrets file"; option_priority = OPRIO_SECFILE; while (w != NULL) { opt = find_option(w->word); if (opt == NULL) { option_error("In secrets file: unrecognized option '%s'", w->word); goto err; } n = n_arguments(opt); w0 = w; for (i = 0; i < n; ++i) { w = w->next; if (w == NULL) { option_error( "In secrets file: too few parameters for option '%s'", w0->word); goto err; } argv[i] = w->word; } if (!process_option(opt, w0->word, argv)) goto err; w = w->next; } ret = 1; err: return ret; } /* * match_option - see if this option matches an option_t structure. */ static int match_option(name, opt, dowild) char *name; option_t *opt; int dowild; { int (*match) __P((char *, char **, int)); if (dowild != (opt->type == o_wild)) return 0; if (!dowild) return strcmp(name, opt->name) == 0; match = (int (*) __P((char *, char **, int))) opt->addr; return (*match)(name, NULL, 0); } /* * find_option - scan the option lists for the various protocols * looking for an entry with the given name. * This could be optimized by using a hash table. */ static option_t * find_option(name) const char *name; { option_t *opt; struct option_list *list; int i, dowild; for (dowild = 0; dowild <= 1; ++dowild) { for (opt = general_options; opt->name != NULL; ++opt) if (match_option(name, opt, dowild)) return opt; for (opt = auth_options; opt->name != NULL; ++opt) if (match_option(name, opt, dowild)) return opt; for (list = extra_options; list != NULL; list = list->next) for (opt = list->options; opt->name != NULL; ++opt) if (match_option(name, opt, dowild)) return opt; for (opt = the_channel->options; opt->name != NULL; ++opt) if (match_option(name, opt, dowild)) return opt; for (i = 0; protocols[i] != NULL; ++i) if ((opt = protocols[i]->options) != NULL) for (; opt->name != NULL; ++opt) if (match_option(name, opt, dowild)) return opt; } return NULL; } /* * process_option - process one new-style option. */ static int process_option(opt, cmd, argv) option_t *opt; char *cmd; char **argv; { u_int32_t v; int iv, a; char *sv; int (*parser) __P((char **)); int (*wildp) __P((char *, char **, int)); char *optopt = (opt->type == o_wild)? "": " option"; int prio = option_priority; option_t *mainopt = opt; if ((opt->flags & OPT_PRIVFIX) && privileged_option) prio += OPRIO_ROOT; while (mainopt->flags & OPT_PRIOSUB) --mainopt; if (mainopt->flags & OPT_PRIO) { if (prio < mainopt->priority) { /* new value doesn't override old */ if (prio == OPRIO_CMDLINE && mainopt->priority > OPRIO_ROOT) { option_error("%s%s set in %s cannot be overridden\n", opt->name, optopt, mainopt->source); return 0; } return 1; } if (prio > OPRIO_ROOT && mainopt->priority == OPRIO_CMDLINE) warn("%s%s from %s overrides command line", opt->name, optopt, option_source); } if ((opt->flags & OPT_INITONLY) && phase != PHASE_INITIALIZE) { option_error("%s%s cannot be changed after initialization", opt->name, optopt); return 0; } if ((opt->flags & OPT_PRIV) && !privileged_option) { option_error("using the %s%s requires root privilege", opt->name, optopt); return 0; } if ((opt->flags & OPT_ENABLE) && *(bool *)(opt->addr2) == 0) { option_error("%s%s is disabled", opt->name, optopt); return 0; } if ((opt->flags & OPT_DEVEQUIV) && devnam_fixed) { option_error("the %s%s may not be changed in %s", opt->name, optopt, option_source); return 0; } switch (opt->type) { case o_bool: v = opt->flags & OPT_VALUE; *(bool *)(opt->addr) = v; if (opt->addr2 && (opt->flags & OPT_A2COPY)) *(bool *)(opt->addr2) = v; break; case o_int: iv = 0; if ((opt->flags & OPT_NOARG) == 0) { if (!int_option(*argv, &iv)) return 0; if ((((opt->flags & OPT_LLIMIT) && iv < opt->lower_limit) || ((opt->flags & OPT_ULIMIT) && iv > opt->upper_limit)) && !((opt->flags & OPT_ZEROOK && iv == 0))) { char *zok = (opt->flags & OPT_ZEROOK)? " zero or": ""; switch (opt->flags & OPT_LIMITS) { case OPT_LLIMIT: option_error("%s value must be%s >= %d", opt->name, zok, opt->lower_limit); break; case OPT_ULIMIT: option_error("%s value must be%s <= %d", opt->name, zok, opt->upper_limit); break; case OPT_LIMITS: option_error("%s value must be%s between %d and %d", opt->name, opt->lower_limit, opt->upper_limit); break; } return 0; } } a = opt->flags & OPT_VALUE; if (a >= 128) a -= 256; /* sign extend */ iv += a; if (opt->flags & OPT_INC) iv += *(int *)(opt->addr); if ((opt->flags & OPT_NOINCR) && !privileged_option) { int oldv = *(int *)(opt->addr); if ((opt->flags & OPT_ZEROINF) ? (oldv != 0 && (iv == 0 || iv > oldv)) : (iv > oldv)) { option_error("%s value cannot be increased", opt->name); return 0; } } *(int *)(opt->addr) = iv; if (opt->addr2 && (opt->flags & OPT_A2COPY)) *(int *)(opt->addr2) = iv; break; case o_uint32: if (opt->flags & OPT_NOARG) { v = opt->flags & OPT_VALUE; if (v & 0x80) v |= 0xffffff00U; } else if (!number_option(*argv, &v, 16)) return 0; if (opt->flags & OPT_OR) v |= *(u_int32_t *)(opt->addr); *(u_int32_t *)(opt->addr) = v; if (opt->addr2 && (opt->flags & OPT_A2COPY)) *(u_int32_t *)(opt->addr2) = v; break; case o_string: if (opt->flags & OPT_STATIC) { strlcpy((char *)(opt->addr), *argv, opt->upper_limit); } else { sv = strdup(*argv); if (sv == NULL) novm("option argument"); *(char **)(opt->addr) = sv; } break; case o_special_noarg: case o_special: parser = (int (*) __P((char **))) opt->addr; if (!(*parser)(argv)) return 0; if (opt->flags & OPT_A2LIST) { struct option_value *ovp, **pp; ovp = malloc(sizeof(*ovp) + strlen(*argv)); if (ovp != 0) { strcpy(ovp->value, *argv); ovp->source = option_source; ovp->next = NULL; pp = (struct option_value **) &opt->addr2; while (*pp != 0) pp = &(*pp)->next; *pp = ovp; } } break; case o_wild: wildp = (int (*) __P((char *, char **, int))) opt->addr; if (!(*wildp)(cmd, argv, 1)) return 0; break; } if (opt->addr2 && (opt->flags & (OPT_A2COPY|OPT_ENABLE |OPT_A2PRINTER|OPT_A2STRVAL|OPT_A2LIST)) == 0) *(bool *)(opt->addr2) = !(opt->flags & OPT_A2CLR); mainopt->source = option_source; mainopt->priority = prio; mainopt->winner = opt - mainopt; return 1; } /* * override_value - if the option priorities would permit us to * override the value of option, return 1 and update the priority * and source of the option value. Otherwise returns 0. */ int override_value(option, priority, source) const char *option; int priority; const char *source; { option_t *opt; opt = find_option(option); if (opt == NULL) return 0; while (opt->flags & OPT_PRIOSUB) --opt; if ((opt->flags & OPT_PRIO) && priority < opt->priority) return 0; opt->priority = priority; opt->source = source; opt->winner = -1; return 1; } /* * n_arguments - tell how many arguments an option takes */ static int n_arguments(opt) option_t *opt; { return (opt->type == o_bool || opt->type == o_special_noarg || (opt->flags & OPT_NOARG))? 0: 1; } /* * add_options - add a list of options to the set we grok. */ void add_options(opt) option_t *opt; { struct option_list *list; list = malloc(sizeof(*list)); if (list == 0) novm("option list entry"); list->options = opt; list->next = extra_options; extra_options = list; } /* * check_options - check that options are valid and consistent. */ void check_options() { if (logfile_fd >= 0 && logfile_fd != log_to_fd) close(logfile_fd); } /* * print_option - print out an option and its value */ static void print_option(opt, mainopt, printer, arg) option_t *opt, *mainopt; void (*printer) __P((void *, char *, ...)); void *arg; { int i, v; char *p; if (opt->flags & OPT_NOPRINT) return; switch (opt->type) { case o_bool: v = opt->flags & OPT_VALUE; if (*(bool *)opt->addr != v) /* this can happen legitimately, e.g. lock option turned off for default device */ break; printer(arg, "%s", opt->name); break; case o_int: v = opt->flags & OPT_VALUE; if (v >= 128) v -= 256; i = *(int *)opt->addr; if (opt->flags & OPT_NOARG) { printer(arg, "%s", opt->name); if (i != v) { if (opt->flags & OPT_INC) { for (; i > v; i -= v) printer(arg, " %s", opt->name); } else printer(arg, " # oops: %d not %d\n", i, v); } } else { printer(arg, "%s %d", opt->name, i); } break; case o_uint32: printer(arg, "%s", opt->name); if ((opt->flags & OPT_NOARG) == 0) printer(arg, " %x", *(u_int32_t *)opt->addr); break; case o_string: if (opt->flags & OPT_HIDE) { p = "??????"; } else { p = (char *) opt->addr; if ((opt->flags & OPT_STATIC) == 0) p = *(char **)p; } printer(arg, "%s %q", opt->name, p); break; case o_special: case o_special_noarg: case o_wild: if (opt->type != o_wild) { printer(arg, "%s", opt->name); if (n_arguments(opt) == 0) break; printer(arg, " "); } if (opt->flags & OPT_A2PRINTER) { void (*oprt) __P((option_t *, void ((*)__P((void *, char *, ...))), void *)); oprt = opt->addr2; (*oprt)(opt, printer, arg); } else if (opt->flags & OPT_A2STRVAL) { p = (char *) opt->addr2; if ((opt->flags & OPT_STATIC) == 0) p = *(char **)p; printer("%q", p); } else if (opt->flags & OPT_A2LIST) { struct option_value *ovp; ovp = (struct option_value *) opt->addr2; for (;;) { printer(arg, "%q", ovp->value); if ((ovp = ovp->next) == NULL) break; printer(arg, "\t\t# (from %s)\n%s ", ovp->source, opt->name); } } else { printer(arg, "xxx # [don't know how to print value]"); } break; default: printer(arg, "# %s value (type %d)", opt->name, opt->type); break; } printer(arg, "\t\t# (from %s)\n", mainopt->source); } /* * print_option_list - print out options in effect from an * array of options. */ static void print_option_list(opt, printer, arg) option_t *opt; void (*printer) __P((void *, char *, ...)); void *arg; { while (opt->name != NULL) { if (opt->priority != OPRIO_DEFAULT && opt->winner != (short int) -1) print_option(opt + opt->winner, opt, printer, arg); do { ++opt; } while (opt->flags & OPT_PRIOSUB); } } /* * print_options - print out what options are in effect. */ void print_options(printer, arg) void (*printer) __P((void *, char *, ...)); void *arg; { struct option_list *list; int i; printer(arg, "pppd options in effect:\n"); print_option_list(general_options, printer, arg); print_option_list(auth_options, printer, arg); for (list = extra_options; list != NULL; list = list->next) print_option_list(list->options, printer, arg); print_option_list(the_channel->options, printer, arg); for (i = 0; protocols[i] != NULL; ++i) print_option_list(protocols[i]->options, printer, arg); } /* * usage - print out a message telling how to use the program. */ static void usage() { if (phase == PHASE_INITIALIZE) fprintf(stderr, usage_string, VERSION, progname); } /* * showhelp - print out usage message and exit. */ static int showhelp(argv) char **argv; { if (phase == PHASE_INITIALIZE) { usage(); exit(0); } return 0; } /* * showversion - print out the version number and exit. */ static int showversion(argv) char **argv; { if (phase == PHASE_INITIALIZE) { fprintf(stderr, "pppd version %s\n", VERSION); exit(0); } return 0; } /* * option_error - print a message about an error in an option. * The message is logged, and also sent to * stderr if phase == PHASE_INITIALIZE. */ void option_error __V((char *fmt, ...)) { va_list args; char buf[1024]; #if defined(__STDC__) va_start(args, fmt); #else char *fmt; va_start(args); fmt = va_arg(args, char *); #endif vslprintf(buf, sizeof(buf), fmt, args); va_end(args); if (phase == PHASE_INITIALIZE) fprintf(stderr, "%s: %s\n", progname, buf); syslog(LOG_ERR, "%s", buf); } #if 0 /* * readable - check if a file is readable by the real user. */ int readable(fd) int fd; { uid_t uid; int i; struct stat sbuf; uid = getuid(); if (uid == 0) return 1; if (fstat(fd, &sbuf) != 0) return 0; if (sbuf.st_uid == uid) return sbuf.st_mode & S_IRUSR; if (sbuf.st_gid == getgid()) return sbuf.st_mode & S_IRGRP; for (i = 0; i < ngroups; ++i) if (sbuf.st_gid == groups[i]) return sbuf.st_mode & S_IRGRP; return sbuf.st_mode & S_IROTH; } #endif /* * Read a word from a file. * Words are delimited by white-space or by quotes (" or '). * Quotes, white-space and \ may be escaped with \. * \ is ignored. */ int getword(f, word, newlinep, filename) FILE *f; char *word; int *newlinep; char *filename; { int c, len, escape; int quoted, comment; int value, digit, got, n; #define isoctal(c) ((c) >= '0' && (c) < '8') *newlinep = 0; len = 0; escape = 0; comment = 0; /* * First skip white-space and comments. */ for (;;) { c = getc(f); if (c == EOF) break; /* * A newline means the end of a comment; backslash-newline * is ignored. Note that we cannot have escape && comment. */ if (c == '\n') { if (!escape) { *newlinep = 1; comment = 0; } else escape = 0; continue; } /* * Ignore characters other than newline in a comment. */ if (comment) continue; /* * If this character is escaped, we have a word start. */ if (escape) break; /* * If this is the escape character, look at the next character. */ if (c == '\\') { escape = 1; continue; } /* * If this is the start of a comment, ignore the rest of the line. */ if (c == '#') { comment = 1; continue; } /* * A non-whitespace character is the start of a word. */ if (!isspace(c)) break; } /* * Save the delimiter for quoted strings. */ if (!escape && (c == '"' || c == '\'')) { quoted = c; c = getc(f); } else quoted = 0; /* * Process characters until the end of the word. */ while (c != EOF) { if (escape) { /* * This character is escaped: backslash-newline is ignored, * various other characters indicate particular values * as for C backslash-escapes. */ escape = 0; if (c == '\n') { c = getc(f); continue; } got = 0; switch (c) { case 'a': value = '\a'; break; case 'b': value = '\b'; break; case 'f': value = '\f'; break; case 'n': value = '\n'; break; case 'r': value = '\r'; break; case 's': value = ' '; break; case 't': value = '\t'; break; default: if (isoctal(c)) { /* * \ddd octal sequence */ value = 0; for (n = 0; n < 3 && isoctal(c); ++n) { value = (value << 3) + (c & 07); c = getc(f); } got = 1; break; } if (c == 'x') { /* * \x sequence */ value = 0; c = getc(f); for (n = 0; n < 2 && isxdigit(c); ++n) { digit = toupper(c) - '0'; if (digit > 10) digit += '0' + 10 - 'A'; value = (value << 4) + digit; c = getc (f); } got = 1; break; } /* * Otherwise the character stands for itself. */ value = c; break; } /* * Store the resulting character for the escape sequence. */ if (len < MAXWORDLEN-1) word[len] = value; ++len; if (!got) c = getc(f); continue; } /* * Not escaped: see if we've reached the end of the word. */ if (quoted) { if (c == quoted) break; } else { if (isspace(c) || c == '#') { ungetc (c, f); break; } } /* * Backslash starts an escape sequence. */ if (c == '\\') { escape = 1; c = getc(f); continue; } /* * An ordinary character: store it in the word and get another. */ if (len < MAXWORDLEN-1) word[len] = c; ++len; c = getc(f); } /* * End of the word: check for errors. */ if (c == EOF) { if (ferror(f)) { if (errno == 0) errno = EIO; option_error("Error reading %s: %m", filename); die(1); } /* * If len is zero, then we didn't find a word before the * end of the file. */ if (len == 0) return 0; } /* * Warn if the word was too long, and append a terminating null. */ if (len >= MAXWORDLEN) { option_error("warning: word in file %s too long (%.20s...)", filename, word); len = MAXWORDLEN - 1; } word[len] = 0; return 1; #undef isoctal } /* * number_option - parse an unsigned numeric parameter for an option. */ static int number_option(str, valp, base) char *str; u_int32_t *valp; int base; { char *ptr; *valp = strtoul(str, &ptr, base); if (ptr == str) { option_error("invalid numeric parameter '%s' for %s option", str, current_option); return 0; } return 1; } /* * int_option - like number_option, but valp is int *, * the base is assumed to be 0, and *valp is not changed * if there is an error. */ int int_option(str, valp) char *str; int *valp; { u_int32_t v; if (!number_option(str, &v, 0)) return 0; *valp = (int) v; return 1; } /* * The following procedures parse options. */ /* * readfile - take commands from a file. */ static int readfile(argv) char **argv; { return options_from_file(*argv, 1, 1, privileged_option); } /* * callfile - take commands from /etc/ppp/peers/. * Name may not contain /../, start with / or ../, or end in /.. */ static int callfile(argv) char **argv; { char *fname, *arg, *p; int l, ok; arg = *argv; ok = 1; if (arg[0] == '/' || arg[0] == 0) ok = 0; else { for (p = arg; *p != 0; ) { if (p[0] == '.' && p[1] == '.' && (p[2] == '/' || p[2] == 0)) { ok = 0; break; } while (*p != '/' && *p != 0) ++p; if (*p == '/') ++p; } } if (!ok) { option_error("call option value may not contain .. or start with /"); return 0; } l = strlen(arg) + strlen(_PATH_PEERFILES) + 1; if ((fname = (char *) malloc(l)) == NULL) novm("call file name"); slprintf(fname, l, "%s%s", _PATH_PEERFILES, arg); ok = options_from_file(fname, 1, 1, 1); free(fname); return ok; } #ifdef PPP_FILTER /* * setpassfilter - Set the pass filter for packets */ static int setpassfilter(argv) char **argv; { pc.linktype = DLT_PPP; pc.snapshot = PPP_HDRLEN; if (pcap_compile(&pc, &pass_filter, *argv, 1, netmask) == 0) return 1; option_error("error in pass-filter expression: %s\n", pcap_geterr(&pc)); return 0; } /* * setactivefilter - Set the active filter for packets */ static int setactivefilter(argv) char **argv; { pc.linktype = DLT_PPP; pc.snapshot = PPP_HDRLEN; if (pcap_compile(&pc, &active_filter, *argv, 1, netmask) == 0) return 1; option_error("error in active-filter expression: %s\n", pcap_geterr(&pc)); return 0; } #endif /* * setdomain - Set domain name to append to hostname */ static int setdomain(argv) char **argv; { gethostname(hostname, MAXNAMELEN); if (**argv != 0) { if (**argv != '.') strncat(hostname, ".", MAXNAMELEN - strlen(hostname)); domain = hostname + strlen(hostname); strncat(hostname, *argv, MAXNAMELEN - strlen(hostname)); } hostname[MAXNAMELEN-1] = 0; return (1); } static int setlogfile(argv) char **argv; { int fd, err; if (!privileged_option) seteuid(getuid()); fd = open(*argv, O_WRONLY | O_APPEND | O_CREAT | O_EXCL, 0644); if (fd < 0 && errno == EEXIST) fd = open(*argv, O_WRONLY | O_APPEND); err = errno; if (!privileged_option) seteuid(0); if (fd < 0) { errno = err; option_error("Can't open log file %s: %m", *argv); return 0; } strlcpy(logfile_name, *argv, sizeof(logfile_name)); if (logfile_fd >= 0) close(logfile_fd); logfile_fd = fd; log_to_fd = fd; log_default = 0; return 1; } #ifdef PLUGIN static int loadplugin(argv) char **argv; { char *arg = *argv; void *handle; const char *err; void (*init) __P((void)); char *path = arg; const char *vers; if (strchr(arg, '/') == 0) { const char *base = _PATH_PLUGIN; int l = strlen(base) + strlen(arg) + 2; path = malloc(l); if (path == 0) novm("plugin file path"); strlcpy(path, base, l); strlcat(path, "/", l); strlcat(path, arg, l); } handle = dlopen(path, RTLD_GLOBAL | RTLD_NOW); if (handle == 0) { err = dlerror(); if (err != 0) option_error("%s", err); option_error("Couldn't load plugin %s", arg); goto err; } init = (void (*)(void))dlsym(handle, "plugin_init"); if (init == 0) { option_error("%s has no initialization entry point", arg); goto errclose; } vers = (const char *) dlsym(handle, "pppd_version"); if (vers == 0) { warn("Warning: plugin %s has no version information", arg); } else if (strcmp(vers, VERSION) != 0) { option_error("Plugin %s is for pppd version %s, this is %s", vers, VERSION); goto errclose; } info("Plugin %s loaded.", arg); (*init)(); return 1; errclose: dlclose(handle); err: if (path != arg) free(path); return 0; } #endif /* PLUGIN */