From 783a3fad921c10869474f5e746ffc2bb12c82531 Mon Sep 17 00:00:00 2001 From: Funda Wang Date: Wed, 30 Nov 2005 10:35:35 +0000 Subject: Updated POT file. --- perl-install/share/po/zh_TW.po | 819 +++++++++++++++++++++-------------------- 1 file changed, 416 insertions(+), 403 deletions(-) (limited to 'perl-install/share/po/zh_TW.po') diff --git a/perl-install/share/po/zh_TW.po b/perl-install/share/po/zh_TW.po index f9f9589c7..c6abf754b 100644 --- a/perl-install/share/po/zh_TW.po +++ b/perl-install/share/po/zh_TW.po @@ -18,7 +18,7 @@ msgid "" msgstr "" "Project-Id-Version: DrakX\n" -"POT-Creation-Date: 2005-11-18 16:24+0100\n" +"POT-Creation-Date: 2005-11-30 17:38+0800\n" "PO-Revision-Date: 2005-10-25 12:01+0800\n" "Last-Translator: Shiva Huang \n" "Language-Team: Traditional Chinese \n" @@ -87,7 +87,7 @@ msgstr "" "請按下此按鈕來重新開機，移除隨身碟並解除它的寫入保護，接著重\n" "新插入隨身碟，最後重新啟動 Mandriva Move。" -#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1332 +#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1334 #, c-format msgid "Reboot" msgstr "重新開機" @@ -178,17 +178,17 @@ msgstr "請稍候，正在偵測與設定裝置中..." #: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404 #: diskdrake/interactive.pm:422 diskdrake/interactive.pm:559 #: diskdrake/interactive.pm:564 diskdrake/smbnfs_gtk.pm:41 do_pkgs.pm:19 -#: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:217 install_any.pm:1776 -#: install_any.pm:1828 install_steps.pm:81 install_steps_interactive.pm:37 +#: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:217 install_any.pm:1775 +#: install_any.pm:1827 install_steps.pm:81 install_steps_interactive.pm:37 #: interactive/http.pm:117 interactive/http.pm:118 modules/interactive.pm:19 #: network/ndiswrapper.pm:27 network/ndiswrapper.pm:42 #: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101 -#: network/netconnect.pm:833 network/netconnect.pm:862 -#: network/netconnect.pm:962 network/netconnect.pm:966 -#: network/netconnect.pm:970 network/netconnect.pm:975 -#: network/netconnect.pm:1120 network/netconnect.pm:1124 -#: network/netconnect.pm:1243 network/netconnect.pm:1248 -#: network/netconnect.pm:1268 network/netconnect.pm:1427 +#: network/netconnect.pm:838 network/netconnect.pm:867 +#: network/netconnect.pm:967 network/netconnect.pm:971 +#: network/netconnect.pm:975 network/netconnect.pm:980 +#: network/netconnect.pm:1125 network/netconnect.pm:1129 +#: network/netconnect.pm:1248 network/netconnect.pm:1253 +#: network/netconnect.pm:1273 network/netconnect.pm:1432 #: network/thirdparty.pm:319 network/thirdparty.pm:326 #: network/thirdparty.pm:370 network/thirdparty.pm:372 #: network/thirdparty.pm:393 network/thirdparty.pm:417 @@ -230,7 +230,7 @@ msgstr "請稍候，正在偵測與設定裝置中..." #: standalone/drakbackup:4435 standalone/drakclock:124 #: standalone/drakconnect:676 standalone/drakconnect:680 #: standalone/drakconnect:685 standalone/drakconnect:700 -#: standalone/drakfont:210 standalone/drakfont:223 standalone/drakfont:261 +#: standalone/drakfont:209 standalone/drakfont:222 standalone/drakfont:260 #: standalone/drakgw:50 standalone/drakgw:188 standalone/drakhosts:98 #: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260 #: standalone/draknfs:306 standalone/draknfs:609 standalone/draknfs:616 @@ -246,7 +246,7 @@ msgstr "請稍候，正在偵測與設定裝置中..." #: standalone/draksambashare:1192 standalone/draksambashare:1212 #: standalone/draksambashare:1220 standalone/draksambashare:1232 #: standalone/draksplash:162 standalone/drakxtv:107 -#: standalone/finish-install:49 standalone/logdrake:171 +#: standalone/finish-install:66 standalone/logdrake:171 #: standalone/logdrake:440 standalone/logdrake:445 standalone/scannerdrake:59 #: standalone/scannerdrake:202 standalone/scannerdrake:261 #: standalone/scannerdrake:715 standalone/scannerdrake:726 @@ -482,13 +482,13 @@ msgstr "" "您的顯示卡搭配 Xorg %s 能夠啟用 3D 硬體加速功能，\n" "但是請注意，這是實驗性質的支援項目，而且可能會使您的電腦停止回應。" -#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:973 +#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:975 #, c-format msgid "Custom" msgstr "自訂" #: Xconfig/main.pm:127 diskdrake/dav.pm:26 help.pm:14 -#: install_steps_interactive.pm:86 install_steps_interactive.pm:1332 +#: install_steps_interactive.pm:86 install_steps_interactive.pm:1334 #: printer/printerdrake.pm:882 printer/printerdrake.pm:899 #: printer/printerdrake.pm:4523 printer/printerdrake.pm:4987 #: standalone/drakhosts:263 standalone/drakroam:230 standalone/draksplash:93 @@ -520,8 +520,8 @@ msgstr "測試" #: Xconfig/main.pm:143 diskdrake/dav.pm:65 diskdrake/interactive.pm:448 #: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79 -#: printer/printerdrake.pm:1112 standalone/drakfont:494 -#: standalone/drakfont:556 +#: printer/printerdrake.pm:1112 standalone/drakfont:493 +#: standalone/drakfont:555 #, c-format msgid "Options" msgstr "選項" @@ -657,7 +657,7 @@ msgstr "顯示卡：%s" #: standalone/drakbackup:4155 standalone/drakbackup:4199 #: standalone/drakbackup:4453 standalone/drakconnect:158 #: standalone/drakconnect:852 standalone/drakconnect:939 -#: standalone/drakconnect:1030 standalone/drakfont:577 standalone/drakfont:587 +#: standalone/drakconnect:1030 standalone/drakfont:576 standalone/drakfont:586 #: standalone/draksplash:173 standalone/drakups:212 standalone/net_monitor:339 #: ugtk2.pm:392 ugtk2.pm:490 ugtk2.pm:899 ugtk2.pm:922 #, c-format @@ -665,8 +665,8 @@ msgid "Ok" msgstr "確定" #: Xconfig/resolution_and_depth.pm:373 diskdrake/smbnfs_gtk.pm:80 help.pm:89 -#: help.pm:444 install_steps_gtk.pm:455 install_steps_interactive.pm:429 -#: install_steps_interactive.pm:840 interactive.pm:120 interactive.pm:437 +#: help.pm:444 install_steps_gtk.pm:455 install_steps_interactive.pm:431 +#: install_steps_interactive.pm:842 interactive.pm:120 interactive.pm:437 #: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318 #: interactive/stdio.pm:39 interactive/stdio.pm:142 #: printer/printerdrake.pm:3859 standalone/drakautoinst:215 @@ -674,7 +674,7 @@ msgstr "確定" #: standalone/drakbackup:4028 standalone/drakbackup:4083 #: standalone/drakbackup:4453 standalone/drakconnect:157 #: standalone/drakconnect:937 standalone/drakconnect:1029 -#: standalone/drakfont:587 standalone/drakfont:665 standalone/drakfont:742 +#: standalone/drakfont:586 standalone/drakfont:662 standalone/drakfont:739 #: standalone/draksplash:173 standalone/drakups:219 standalone/logdrake:176 #: standalone/net_monitor:338 ugtk2.pm:386 ugtk2.pm:488 ugtk2.pm:497 #: ugtk2.pm:899 @@ -687,7 +687,7 @@ msgstr "取消" #: interactive/gtk.pm:682 interactive/gtk.pm:684 standalone/drakTermServ:284 #: standalone/drakbackup:4020 standalone/drakbug:105 #: standalone/drakconnect:153 standalone/drakconnect:236 -#: standalone/drakfont:512 standalone/draknfs:206 standalone/drakperm:133 +#: standalone/drakfont:511 standalone/draknfs:206 standalone/drakperm:133 #: standalone/draksambashare:320 standalone/draksec:344 standalone/draksec:346 #: standalone/draksec:364 standalone/draksec:366 ugtk2.pm:1031 ugtk2.pm:1032 #, c-format @@ -1347,55 +1347,55 @@ msgstr "預設使用 Unicode" msgid "All languages" msgstr "所有語言" -#: any.pm:840 help.pm:566 help.pm:855 install_steps_interactive.pm:961 +#: any.pm:842 help.pm:566 help.pm:855 install_steps_interactive.pm:963 #, c-format msgid "Country / Region" msgstr "國家/地區" -#: any.pm:842 +#: any.pm:844 #, c-format msgid "Please choose your country." msgstr "請選擇您的國家。" -#: any.pm:844 +#: any.pm:846 #, c-format msgid "Here is the full list of available countries" msgstr "以下是全部可用的所有的國家清單" -#: any.pm:845 +#: any.pm:847 #, c-format msgid "Other Countries" msgstr "其他國家" -#: any.pm:845 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722 +#: any.pm:847 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722 #: interactive.pm:397 #, c-format msgid "Advanced" msgstr "進階" -#: any.pm:853 +#: any.pm:855 #, c-format msgid "Input method:" msgstr "輸入法：" -#: any.pm:856 install_any.pm:422 network/netconnect.pm:318 -#: network/netconnect.pm:323 network/netconnect.pm:1234 network/wireless.pm:7 +#: any.pm:858 install_any.pm:422 network/netconnect.pm:318 +#: network/netconnect.pm:323 network/netconnect.pm:1239 network/wireless.pm:7 #: printer/printerdrake.pm:105 #, c-format msgid "None" msgstr "無" -#: any.pm:973 +#: any.pm:975 #, c-format msgid "No sharing" msgstr "不分享" -#: any.pm:973 +#: any.pm:975 #, c-format msgid "Allow all users" msgstr "允許所有使用者" -#: any.pm:977 +#: any.pm:979 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" @@ -1410,35 +1410,35 @@ msgstr "" "\n" "\"自訂\" 允許每一個使用者自行設定。\n" -#: any.pm:989 +#: any.pm:991 #, c-format msgid "" "NFS: the traditional Unix file sharing system, with less support on Mac and " "Windows." msgstr "NFS：傳統的 Unix 檔案分享系統，但 Mac 與 Windows 的支援較不足。" -#: any.pm:992 +#: any.pm:994 #, c-format msgid "" "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux " "systems." msgstr "SMB：一個 Windows、Mac OS X 與許多先進的 Linux 系統用的檔案分享系統。" -#: any.pm:1000 +#: any.pm:1002 #, c-format msgid "" "You can export using NFS or SMB. Please select which you would like to use." msgstr "您能夠用 NFS 或者是 SMB 匯出。請選擇您想要用那一個。" -#: any.pm:1025 +#: any.pm:1027 #, c-format msgid "Launch userdrake" msgstr "啟動 userdrake" -#: any.pm:1025 printer/printerdrake.pm:4062 printer/printerdrake.pm:4065 +#: any.pm:1027 printer/printerdrake.pm:4062 printer/printerdrake.pm:4065 #: printer/printerdrake.pm:4066 printer/printerdrake.pm:4067 #: printer/printerdrake.pm:5305 standalone/drakTermServ:294 -#: standalone/drakbackup:4217 standalone/drakbug:126 standalone/drakfont:500 +#: standalone/drakbackup:4217 standalone/drakbug:126 standalone/drakfont:499 #: standalone/drakids:64 standalone/drakids:77 standalone/drakids:85 #: standalone/draknfs:210 standalone/net_monitor:117 #: standalone/printerdrake:583 @@ -1446,7 +1446,7 @@ msgstr "啟動 userdrake" msgid "Close" msgstr "關閉" -#: any.pm:1027 +#: any.pm:1029 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" @@ -2091,6 +2091,13 @@ msgstr "掛載點：" msgid "Options: %s" msgstr "選項： %s" +#: diskdrake/hd_gtk.pm:52 diskdrake/interactive.pm:292 +#: diskdrake/smbnfs_gtk.pm:21 install_interactive.pm:62 +#: install_steps_interactive.pm:342 +#, c-format +msgid "Partitionning" +msgstr "" + #: diskdrake/hd_gtk.pm:92 #, c-format msgid "Please make a backup of your data first" @@ -2263,7 +2270,7 @@ msgstr "放棄寫入硬碟分割表就離開？" msgid "Do you want to save /etc/fstab modifications" msgstr "您想要儲存對 /etc/fstab 檔案的修改嗎？" -#: diskdrake/interactive.pm:292 install_steps_interactive.pm:340 +#: diskdrake/interactive.pm:292 install_steps_interactive.pm:342 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "您必須重新開機以使更動過的硬碟分割表生效" @@ -2913,7 +2920,7 @@ msgstr "這個加密金鑰太簡單了 (至少要有 %d 個字元才行)" msgid "The encryption keys do not match" msgstr "輸入的加密金鑰不符合" -#: diskdrake/interactive.pm:1338 network/netconnect.pm:1070 +#: diskdrake/interactive.pm:1338 network/netconnect.pm:1075 #: standalone/drakconnect:419 standalone/drakroam:120 #, c-format msgid "Encryption key" @@ -2991,7 +2998,7 @@ msgstr "無法安裝 %s 套件！" msgid "Mandatory package %s is missing" msgstr "必要的 %s 套件遺失" -#: do_pkgs.pm:35 harddrake/sound.pm:274 install_steps_interactive.pm:1317 +#: do_pkgs.pm:35 harddrake/sound.pm:275 install_steps_interactive.pm:1319 #: keyboard.pm:388 network/ndiswrapper.pm:95 network/netconnect.pm:472 #: printer/printerdrake.pm:1416 printer/printerdrake.pm:2494 #: printer/printerdrake.pm:2609 printer/printerdrake.pm:2930 @@ -3133,30 +3140,20 @@ msgstr "所有對於此檔案系統的存取 (I/O) 動作必須同步。" #: fs/mount_options.pm:138 #, c-format -msgid "" -"Allow an ordinary user to mount the file system. The\n" -"name of the mounting user is written to mtab so that he can unmount the " -"file\n" -"system again. This option implies the options noexec, nosuid, and nodev\n" -"(unless overridden by subsequent options, as in the option line\n" -"user,exec,dev,suid )." +msgid "Allow an ordinary user to mount the file system." msgstr "" -"允許一般使用者掛載檔案系統。\n" -"掛載的使用者名稱會被寫入 mtab 因此他可以卸載檔案系統。\n" -"這個選項套用了 noexec、nosuid 以及 nodev 的參數\n" -"(除非被以下參數複寫，例如選項行 user、exec、dev、suid 參數)。" -#: fs/mount_options.pm:144 +#: fs/mount_options.pm:140 #, c-format msgid "Enable user disk quota accounting, and optionally enforce limits" msgstr "" -#: fs/mount_options.pm:146 +#: fs/mount_options.pm:142 #, c-format msgid "Give write access to ordinary users" msgstr "授予寫入權限給一般使用者" -#: fs/mount_options.pm:148 +#: fs/mount_options.pm:144 #, c-format msgid "Give read-only access to ordinary users" msgstr "授予唯讀權限給一般使用者" @@ -3272,7 +3269,7 @@ msgstr "沒有足夠的空間來進行自動配置" msgid "Nothing to do" msgstr "沒有做任何動作" -#: harddrake/data.pm:62 install_any.pm:1711 +#: harddrake/data.pm:62 install_any.pm:1710 #, c-format msgid "Floppy" msgstr "軟碟機" @@ -3282,12 +3279,12 @@ msgstr "軟碟機" msgid "Zip" msgstr "Zip" -#: harddrake/data.pm:88 install_any.pm:1712 +#: harddrake/data.pm:88 install_any.pm:1711 #, c-format msgid "Hard Disk" msgstr "硬碟" -#: harddrake/data.pm:97 install_any.pm:1713 +#: harddrake/data.pm:97 install_any.pm:1712 #, c-format msgid "CDROM" msgstr "光碟機" @@ -3398,7 +3395,7 @@ msgid "AGP controllers" msgstr "AGP 控制器" #: harddrake/data.pm:324 help.pm:186 help.pm:855 -#: install_steps_interactive.pm:993 +#: install_steps_interactive.pm:995 #, c-format msgid "Printer" msgstr "印表機" @@ -3465,7 +3462,8 @@ msgid "Bridges and system controllers" msgstr "橋樑與系統控制器" #: harddrake/data.pm:449 help.pm:855 install_steps_interactive.pm:119 -#: install_steps_interactive.pm:953 standalone/keyboarddrake:29 +#: install_steps_interactive.pm:955 standalone/finish-install:37 +#: standalone/keyboarddrake:29 #, c-format msgid "Keyboard" msgstr "鍵盤" @@ -3475,7 +3473,7 @@ msgstr "鍵盤" msgid "Tablet and touchscreen" msgstr "Tablet 與觸控螢幕" -#: harddrake/data.pm:471 help.pm:855 install_steps_interactive.pm:986 +#: harddrake/data.pm:471 help.pm:855 install_steps_interactive.pm:988 #, c-format msgid "Mouse" msgstr "滑鼠" @@ -3506,12 +3504,12 @@ msgstr "CPU 編號" msgid "Please Wait... Applying the configuration" msgstr "請稍待... 正在套用該設定" -#: harddrake/sound.pm:228 +#: harddrake/sound.pm:229 #, c-format msgid "No alternative driver" msgstr "無另外可供選擇的驅動程式" -#: harddrake/sound.pm:229 +#: harddrake/sound.pm:230 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " @@ -3520,12 +3518,12 @@ msgstr "" "目前沒有另外可供選擇的 OSS/ALSA 驅動程式支援你的音效卡 (%s)\n" "正在使用 \"%s\"" -#: harddrake/sound.pm:235 +#: harddrake/sound.pm:236 #, c-format msgid "Sound configuration" msgstr "音效設定" -#: harddrake/sound.pm:237 +#: harddrake/sound.pm:238 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " @@ -3535,7 +3533,7 @@ msgstr "您可以選擇使用另外的 (OSS 或者 ALSA) 的驅動程式給您 #. -PO: here the first %s is either "OSS" or "ALSA", #. -PO: the second %s is the name of the current driver #. -PO: and the third %s is the name of the default driver -#: harddrake/sound.pm:242 +#: harddrake/sound.pm:243 #, c-format msgid "" "\n" @@ -3547,7 +3545,7 @@ msgstr "" "\n" "您的音效卡現在正在使用 %s\"%s\" 驅動程式 (您的音效卡預設的驅動程式為 \"%s\")" -#: harddrake/sound.pm:244 +#: harddrake/sound.pm:245 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent " @@ -3579,17 +3577,17 @@ msgstr "" "- 相容於 OSS 的舊 API\n" "- 提供許多強化的功能但需要使用 ALSA 函式庫的新 ALSA API。\n" -#: harddrake/sound.pm:258 harddrake/sound.pm:346 standalone/drakups:146 +#: harddrake/sound.pm:259 harddrake/sound.pm:347 standalone/drakups:146 #, c-format msgid "Driver:" msgstr "驅動程式：" -#: harddrake/sound.pm:266 +#: harddrake/sound.pm:267 #, c-format msgid "Trouble shooting" msgstr "疑難排解" -#: harddrake/sound.pm:274 +#: harddrake/sound.pm:275 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" @@ -3604,45 +3602,45 @@ msgstr "" "\n" "於下一次開機時將只會使用新的 \"%s\" 驅動程式。" -#: harddrake/sound.pm:282 +#: harddrake/sound.pm:283 #, c-format msgid "No open source driver" msgstr "無開放原始碼的驅動程式可用" -#: harddrake/sound.pm:283 +#: harddrake/sound.pm:284 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "您的音效卡 (%s) 沒有自由的驅動程式，但是有私有的驅動程式於 \"%s\"." -#: harddrake/sound.pm:286 +#: harddrake/sound.pm:287 #, c-format msgid "No known driver" msgstr "無已知的驅動程式" -#: harddrake/sound.pm:287 +#: harddrake/sound.pm:288 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "您使用的音效卡尚未有已知的驅動程式 (%s)" -#: harddrake/sound.pm:291 network/netconnect.pm:98 network/netconnect.pm:833 +#: harddrake/sound.pm:292 network/netconnect.pm:98 network/netconnect.pm:838 #, c-format msgid "Unknown driver" msgstr "未知的驅動程式" -#: harddrake/sound.pm:292 +#: harddrake/sound.pm:293 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "錯誤：您的音效卡驅動程式 \"%s\" 不在列表中" -#: harddrake/sound.pm:306 +#: harddrake/sound.pm:307 #, c-format msgid "Sound trouble shooting" msgstr "音效問題排除" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX -#: harddrake/sound.pm:309 +#: harddrake/sound.pm:310 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" @@ -3681,18 +3679,18 @@ msgstr "" "\n" "- \"/sbin/fuser -v /dev/dsp\" 將指出哪個程式在使用音效卡。\n" -#: harddrake/sound.pm:335 +#: harddrake/sound.pm:336 #, c-format msgid "Let me pick any driver" msgstr "讓我選擇任何驅動程式" -#: harddrake/sound.pm:338 +#: harddrake/sound.pm:339 #, c-format msgid "Choosing an arbitrary driver" msgstr "正在選擇任意的驅動程式" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX -#: harddrake/sound.pm:341 +#: harddrake/sound.pm:342 #, c-format msgid "" "If you really think that you know which driver is the right one for your " @@ -3788,7 +3786,7 @@ msgstr "" "請點選 \"%s\" 按鈕，否則請點選 \"%s\" 按鈕並自動重新開機。" #: help.pm:14 install_steps_gtk.pm:539 install_steps_interactive.pm:92 -#: install_steps_interactive.pm:738 standalone/drakautoinst:214 +#: install_steps_interactive.pm:740 standalone/drakautoinst:214 #, c-format msgid "Accept" msgstr "接受" @@ -4072,7 +4070,7 @@ msgstr "程式開發" msgid "Graphical Environment" msgstr "圖形環境" -#: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:646 +#: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:648 #, c-format msgid "Individual package selection" msgstr "選取單一套件" @@ -4082,7 +4080,7 @@ msgstr "選取單一套件" msgid "Upgrade" msgstr "升級" -#: help.pm:146 install_steps_interactive.pm:604 +#: help.pm:146 install_steps_interactive.pm:606 #, c-format msgid "With X" msgstr "包含 X 環境" @@ -4135,14 +4133,14 @@ msgid "" "such a floppy." msgstr "" -#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:945 +#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:944 #: interactive.pm:161 modules/interactive.pm:71 standalone/drakbackup:2613 #: standalone/draksec:54 standalone/harddrake2:332 ugtk2.pm:898 wizards.pm:156 #, c-format msgid "No" msgstr "否" -#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:945 interactive.pm:161 +#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:944 interactive.pm:161 #: modules/interactive.pm:71 printer/printerdrake.pm:883 #: printer/printerdrake.pm:898 standalone/drakbackup:2613 #: standalone/draksec:55 standalone/harddrake2:331 ugtk2.pm:898 wizards.pm:156 @@ -4221,7 +4219,7 @@ msgid "" "server which can be used by other machines on your local network as well." msgstr "" -#: help.pm:217 install_steps_interactive.pm:888 +#: help.pm:217 install_steps_interactive.pm:890 #, c-format msgid "Hardware clock set to GMT" msgstr "硬體時鐘設定為 GMT 時間" @@ -4516,7 +4514,7 @@ msgstr "刪除所有磁碟內容" msgid "Remove Windows" msgstr "移除 Windows" -#: help.pm:374 install_interactive.pm:228 +#: help.pm:374 install_interactive.pm:232 #, c-format msgid "Custom disk partitioning" msgstr "自訂磁碟分割" @@ -4588,17 +4586,17 @@ msgstr "" msgid "Generate auto-install floppy" msgstr "產生自動安裝軟片" -#: help.pm:409 install_steps_interactive.pm:1343 +#: help.pm:409 install_steps_interactive.pm:1345 #, c-format msgid "Replay" msgstr "重播" -#: help.pm:409 install_steps_interactive.pm:1343 +#: help.pm:409 install_steps_interactive.pm:1345 #, c-format msgid "Automated" msgstr "自動化" -#: help.pm:409 install_steps_interactive.pm:1346 +#: help.pm:409 install_steps_interactive.pm:1348 #, c-format msgid "Save packages selection" msgstr "儲存套件選擇" @@ -5372,8 +5370,8 @@ msgstr "" "\"%s\": 如果您的系統上有偵測到音效卡，它將會顯示在這裡。如果您發現這並不是\n" "目前您的系統使用的音效卡，您可以按下按鈕並選擇另一個驅動程式。" -#: help.pm:788 help.pm:855 install_steps_interactive.pm:1020 -#: install_steps_interactive.pm:1037 +#: help.pm:788 help.pm:855 install_steps_interactive.pm:1022 +#: install_steps_interactive.pm:1039 #, c-format msgid "Sound card" msgstr "音效卡" @@ -5449,13 +5447,13 @@ msgid "" "idea to review this setup." msgstr "" -#: help.pm:855 install_steps_interactive.pm:884 -#: install_steps_interactive.pm:979 standalone/drakclock:100 +#: help.pm:855 install_steps_interactive.pm:886 +#: install_steps_interactive.pm:981 standalone/drakclock:100 #, c-format msgid "Timezone" msgstr "時區" -#: help.pm:855 install_steps_interactive.pm:1053 +#: help.pm:855 install_steps_interactive.pm:1055 #, c-format msgid "TV card" msgstr "電視卡" @@ -5470,33 +5468,33 @@ msgstr "ISDN 卡" msgid "Graphical Interface" msgstr "圖形介面" -#: help.pm:855 install_any.pm:1734 install_steps_interactive.pm:1071 +#: help.pm:855 install_any.pm:1733 install_steps_interactive.pm:1073 #: standalone/drakbackup:2040 #, c-format msgid "Network" msgstr "網路" -#: help.pm:855 install_steps_interactive.pm:1083 +#: help.pm:855 install_steps_interactive.pm:1085 #, c-format msgid "Proxies" msgstr "代理伺服器" -#: help.pm:855 install_steps_interactive.pm:1094 +#: help.pm:855 install_steps_interactive.pm:1096 #, c-format msgid "Security Level" msgstr "安全層級" -#: help.pm:855 install_steps_interactive.pm:1108 network/drakfirewall.pm:189 +#: help.pm:855 install_steps_interactive.pm:1110 network/drakfirewall.pm:189 #, c-format msgid "Firewall" msgstr "防火牆" -#: help.pm:855 install_steps_interactive.pm:1124 +#: help.pm:855 install_steps_interactive.pm:1126 #, c-format msgid "Bootloader" msgstr "開機載入器" -#: help.pm:855 install_steps_interactive.pm:1137 services.pm:114 +#: help.pm:855 install_steps_interactive.pm:1139 services.pm:114 #: services.pm:157 services.pm:193 #, c-format msgid "Services" @@ -5602,7 +5600,7 @@ msgstr "網路 (NFS)" msgid "Insert the CD 1 again" msgstr "請再次插入光碟 1" -#: install_any.pm:478 network/netconnect.pm:862 standalone/drakbackup:114 +#: install_any.pm:478 network/netconnect.pm:867 standalone/drakbackup:114 #, c-format msgid "No device found" msgstr "沒有找到任何裝置" @@ -5680,7 +5678,7 @@ msgid "Copying in progress" msgstr "複製進行中" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX -#: install_any.pm:936 +#: install_any.pm:935 #, c-format msgid "" "You have selected the following server(s): %s\n" @@ -5703,7 +5701,7 @@ msgstr "" "您確定真的要安裝這些伺服器嗎？\n" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX -#: install_any.pm:959 +#: install_any.pm:958 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" @@ -5716,22 +5714,22 @@ msgstr "" "\n" "您確定要移除這些套件嗎？\n" -#: install_any.pm:1395 partition_table.pm:597 +#: install_any.pm:1394 partition_table.pm:597 #, c-format msgid "Error reading file %s" msgstr "讀取檔案 %s 時發生錯誤" -#: install_any.pm:1629 +#: install_any.pm:1628 #, c-format msgid "The following disk(s) were renamed:" msgstr "下列磁碟已經改名：" -#: install_any.pm:1631 +#: install_any.pm:1630 #, c-format msgid "%s (previously named as %s)" msgstr "%s (原本為 %s)" -#: install_any.pm:1671 +#: install_any.pm:1670 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " @@ -5740,52 +5738,52 @@ msgstr "" "發生了一個錯誤 - 找不到任何有效的裝置可以用來建立新的檔案系統，請檢查您的硬體" "以找出問題的原因所在" -#: install_any.pm:1715 +#: install_any.pm:1714 #, c-format msgid "HTTP" msgstr "HTTP" -#: install_any.pm:1715 +#: install_any.pm:1714 #, c-format msgid "FTP" msgstr "FTP" -#: install_any.pm:1715 +#: install_any.pm:1714 #, c-format msgid "NFS" msgstr "NFS" -#: install_any.pm:1738 +#: install_any.pm:1737 #, c-format msgid "Please choose a media" msgstr "請選擇一個媒介" -#: install_any.pm:1754 +#: install_any.pm:1753 #, c-format msgid "File already exists. Overwrite it?" msgstr "檔案已經存在了。要覆蓋它嗎？" -#: install_any.pm:1758 +#: install_any.pm:1757 #, c-format msgid "Permission denied" msgstr "權限不足" -#: install_any.pm:1807 +#: install_any.pm:1806 #, c-format msgid "Bad NFS name" msgstr "錯誤的 NFS 名稱" -#: install_any.pm:1828 +#: install_any.pm:1827 #, c-format msgid "Bad media %s" msgstr "損壞的媒介 %s" -#: install_any.pm:1878 +#: install_any.pm:1877 #, c-format msgid "Can not make screenshots before partitioning" msgstr "在尚未進行分割前無法提供畫面捕捉功能" -#: install_any.pm:1885 +#: install_any.pm:1884 #, c-format msgid "Screenshots will be available after install in %s" msgstr "在安裝於 %s 後就能夠提供畫面捕捉功能" @@ -5974,17 +5972,24 @@ msgstr "刪除所有磁碟內容" msgid "You have more than one hard drive, which one do you install linux on?" msgstr "你有多於一個硬碟, 您打算用那一個安裝 linux?" -#: install_interactive.pm:219 +#: install_interactive.pm:216 install_interactive.pm:222 +#: install_interactive.pm:275 install_interactive.pm:280 +#: install_steps_interactive.pm:278 steps.pm:21 +#, c-format +msgid "Partitioning" +msgstr "分割磁區" + +#: install_interactive.pm:221 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "所有在 %s 磁碟上的已經存在的分割區跟他們的資料都將會遺失" -#: install_interactive.pm:232 +#: install_interactive.pm:236 #, c-format msgid "Use fdisk" msgstr "使用 fdisk" -#: install_interactive.pm:235 +#: install_interactive.pm:239 #, c-format msgid "" "You can now partition %s.\n" @@ -5993,27 +5998,27 @@ msgstr "" "您現在可以對 %s 分割區進行劃分動作.\n" "當您完成時, 別忘了使用 'w' 儲存" -#: install_interactive.pm:271 +#: install_interactive.pm:275 #, c-format msgid "I can not find any room for installing" msgstr "找不到任何可用的安裝空間" -#: install_interactive.pm:275 +#: install_interactive.pm:279 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "DrakX 分割精靈找到了下列解決方案:" -#: install_interactive.pm:281 +#: install_interactive.pm:287 #, c-format msgid "Partitioning failed: %s" msgstr "硬碟分割失敗: %s" -#: install_interactive.pm:288 +#: install_interactive.pm:294 #, c-format msgid "Bringing up the network" msgstr "帶起網路" -#: install_interactive.pm:293 +#: install_interactive.pm:299 #, c-format msgid "Bringing down the network" msgstr "關閉網路" @@ -6283,12 +6288,12 @@ msgstr "" "若是真的發生問題，您或許可以改用文字模式的安裝方式來取代。\n" "要如此作的話m，請在光碟開機時按下 `F1'，然後輸入 `text'。" -#: install_steps_gtk.pm:211 install_steps_interactive.pm:628 +#: install_steps_gtk.pm:211 install_steps_interactive.pm:630 #, c-format msgid "Package Group Selection" msgstr "套件群組選擇" -#: install_steps_gtk.pm:254 install_steps_interactive.pm:571 +#: install_steps_gtk.pm:254 install_steps_interactive.pm:573 #, c-format msgid "Total size: %d / %d MB" msgstr "總共大小： %d / %d MB" @@ -6404,12 +6409,12 @@ msgstr "正在更新套件的選擇" msgid "Minimal install" msgstr "最小安裝" -#: install_steps_gtk.pm:414 install_steps_interactive.pm:490 +#: install_steps_gtk.pm:414 install_steps_interactive.pm:492 #, c-format msgid "Choose the packages you want to install" msgstr "選擇您想要安裝的套件" -#: install_steps_gtk.pm:431 install_steps_interactive.pm:714 +#: install_steps_gtk.pm:431 install_steps_interactive.pm:716 #, c-format msgid "Installing" msgstr "正在安裝" @@ -6435,12 +6440,12 @@ msgid "%d packages" msgstr "%d 套件" #: install_steps_gtk.pm:539 install_steps_interactive.pm:92 -#: install_steps_interactive.pm:738 +#: install_steps_interactive.pm:740 #, c-format msgid "Refuse" msgstr "拒絕" -#: install_steps_gtk.pm:543 install_steps_interactive.pm:742 +#: install_steps_gtk.pm:543 install_steps_interactive.pm:744 #, c-format msgid "" "Change your Cd-Rom!\n" @@ -6452,29 +6457,29 @@ msgstr "" "請插入標示為為 \"%s\" 的光碟於您的光碟機中，完成後請按下確定。\n" "若是您沒有這片光碟，請點選取消以略過這一片光碟的安裝。" -#: install_steps_gtk.pm:556 install_steps_interactive.pm:753 +#: install_steps_gtk.pm:556 install_steps_interactive.pm:755 #, c-format msgid "There was an error ordering packages:" msgstr "排列套件時發生錯誤：" -#: install_steps_gtk.pm:558 install_steps_interactive.pm:757 +#: install_steps_gtk.pm:558 install_steps_interactive.pm:759 #, c-format msgid "There was an error installing packages:" msgstr "安裝套件時發生錯誤：" -#: install_steps_gtk.pm:560 install_steps_interactive.pm:753 -#: install_steps_interactive.pm:757 +#: install_steps_gtk.pm:560 install_steps_interactive.pm:755 +#: install_steps_interactive.pm:759 #, c-format msgid "Go on anyway?" msgstr "無論如何都要繼續嗎？" -#: install_steps_gtk.pm:582 install_steps_interactive.pm:939 steps.pm:30 +#: install_steps_gtk.pm:582 install_steps_interactive.pm:941 steps.pm:30 #, c-format msgid "Summary" msgstr "總結" -#: install_steps_gtk.pm:605 install_steps_interactive.pm:935 -#: install_steps_interactive.pm:1084 +#: install_steps_gtk.pm:605 install_steps_interactive.pm:937 +#: install_steps_interactive.pm:1086 #, c-format msgid "not configured" msgstr "未被設定" @@ -6615,7 +6620,7 @@ msgstr "正在掃描分割區以尋找掛載點" msgid "Choose the mount points" msgstr "選取掛載點" -#: install_steps_interactive.pm:323 +#: install_steps_interactive.pm:325 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " @@ -6624,7 +6629,7 @@ msgstr "" "沒有足夠的可用空間安裝 bootstrap！安裝還是會繼續，但是您必須在 DiskDrake\n" "中建立 bootstrap 分割來啟動您的系統" -#: install_steps_interactive.pm:328 +#: install_steps_interactive.pm:330 #, c-format msgid "" "You'll need to create a PPC PReP Boot bootstrap! Install will continue, but " @@ -6634,51 +6639,51 @@ msgstr "" "您需要建立一個 PPC PReP 開機 bootstrap！安裝還是會繼續，但是您必須在 " "DiskDrake 中建立 bootstrap 分割來啟動您的系統" -#: install_steps_interactive.pm:364 +#: install_steps_interactive.pm:366 #, c-format msgid "Choose the partitions you want to format" msgstr "選擇要格式化的分割區" -#: install_steps_interactive.pm:366 +#: install_steps_interactive.pm:368 #, c-format msgid "Check bad blocks?" msgstr "檢查壞掉的區塊？" -#: install_steps_interactive.pm:394 +#: install_steps_interactive.pm:396 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can lose data)" msgstr "無法檢查檔案系統 %s。您要修復該錯誤嗎？ (請注意，您可能會遺失資料)" -#: install_steps_interactive.pm:397 +#: install_steps_interactive.pm:399 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "沒有足夠的置換空間 (swap) 可以用來完成安裝，請增加一些" -#: install_steps_interactive.pm:406 +#: install_steps_interactive.pm:408 #, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "正在搜尋可以用的套件並且建立 rpm 資料庫..." -#: install_steps_interactive.pm:407 install_steps_interactive.pm:459 +#: install_steps_interactive.pm:409 install_steps_interactive.pm:461 #, c-format msgid "Looking for available packages..." msgstr "正在搜尋可以用的套件..." -#: install_steps_interactive.pm:428 install_steps_interactive.pm:839 +#: install_steps_interactive.pm:430 install_steps_interactive.pm:841 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "選取要用來抓取程式套件檔的 FTP 映射站台" -#: install_steps_interactive.pm:468 +#: install_steps_interactive.pm:470 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "您的系統沒有足夠的空間可以用來安裝或升級了 (%d > %d)" -#: install_steps_interactive.pm:502 +#: install_steps_interactive.pm:504 #, c-format msgid "" "Please choose load or save package selection.\n" @@ -6687,33 +6692,33 @@ msgstr "" "請選擇要載入或者儲存套件選擇到磁片上。\n" "它使用與自動安裝所產生的磁片相同的格式。" -#: install_steps_interactive.pm:504 +#: install_steps_interactive.pm:506 #, c-format msgid "Load" msgstr "載入" -#: install_steps_interactive.pm:504 standalone/drakbackup:4055 +#: install_steps_interactive.pm:506 standalone/drakbackup:4055 #: standalone/drakbackup:4125 standalone/logdrake:175 #, c-format msgid "Save" msgstr "儲存" -#: install_steps_interactive.pm:512 +#: install_steps_interactive.pm:514 #, c-format msgid "Bad file" msgstr "損壞的檔案" -#: install_steps_interactive.pm:585 +#: install_steps_interactive.pm:587 #, c-format msgid "Selected size is larger than available space" msgstr "所選取的大小超過可用的空間" -#: install_steps_interactive.pm:600 +#: install_steps_interactive.pm:602 #, c-format msgid "Type of install" msgstr "安裝類型" -#: install_steps_interactive.pm:601 +#: install_steps_interactive.pm:603 #, c-format msgid "" "You have not selected any group of packages.\n" @@ -6722,22 +6727,22 @@ msgstr "" "您並未選取任何套件群組。\n" "請選擇您想要的最小安裝：" -#: install_steps_interactive.pm:605 +#: install_steps_interactive.pm:607 #, c-format msgid "With basic documentation (recommended!)" msgstr "包含基本的說明文件 (被建議的！)" -#: install_steps_interactive.pm:606 +#: install_steps_interactive.pm:608 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "真正最小安裝 (尤其無 urpmi)" -#: install_steps_interactive.pm:645 standalone/drakxtv:52 +#: install_steps_interactive.pm:647 standalone/drakxtv:52 #, c-format msgid "All" msgstr "全部" -#: install_steps_interactive.pm:684 +#: install_steps_interactive.pm:686 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" @@ -6748,17 +6753,17 @@ msgstr "" "如果都沒有的話，請點選取消。\n" "如果有一些項目您並沒有的話，把該項目取消選取，然後按下確定。" -#: install_steps_interactive.pm:689 +#: install_steps_interactive.pm:691 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "標示為 \"%s\" 的光碟機" -#: install_steps_interactive.pm:714 +#: install_steps_interactive.pm:716 #, c-format msgid "Preparing installation" msgstr "正在準備安裝" -#: install_steps_interactive.pm:722 +#: install_steps_interactive.pm:724 #, c-format msgid "" "Installing package %s\n" @@ -6767,22 +6772,22 @@ msgstr "" "正在安裝 %s 套件\n" "%d%%" -#: install_steps_interactive.pm:771 +#: install_steps_interactive.pm:773 #, c-format msgid "Post-install configuration" msgstr "安裝後的設定" -#: install_steps_interactive.pm:778 +#: install_steps_interactive.pm:780 #, c-format msgid "Please ensure the Update Modules media is in drive %s" msgstr "" -#: install_steps_interactive.pm:812 +#: install_steps_interactive.pm:814 #, c-format msgid "Updates" msgstr "更新" -#: install_steps_interactive.pm:813 +#: install_steps_interactive.pm:815 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" @@ -6801,142 +6806,142 @@ msgstr "" "\n" "您想要安裝更新嗎？" -#: install_steps_interactive.pm:834 +#: install_steps_interactive.pm:836 #, c-format msgid "" "Contacting Mandriva Linux web site to get the list of available mirrors..." msgstr "正在連結到 Mandriva Linux 網站查詢可用的映射站台..." -#: install_steps_interactive.pm:853 +#: install_steps_interactive.pm:855 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "聯繫映射站台取得可用的程式套件列表..." -#: install_steps_interactive.pm:857 +#: install_steps_interactive.pm:859 #, c-format msgid "Unable to contact mirror %s" msgstr "無法聯繫映射站台 %s" -#: install_steps_interactive.pm:857 +#: install_steps_interactive.pm:859 #, c-format msgid "Would you like to try again?" msgstr "您要再試一次嗎？" -#: install_steps_interactive.pm:884 standalone/drakclock:45 +#: install_steps_interactive.pm:886 standalone/drakclock:45 #, c-format msgid "Which is your timezone?" msgstr "您的時區為何？" -#: install_steps_interactive.pm:889 +#: install_steps_interactive.pm:891 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "自動時間同步 (使用 NTP 服務)" -#: install_steps_interactive.pm:897 +#: install_steps_interactive.pm:899 #, c-format msgid "NTP Server" msgstr "NTP 伺服器" -#: install_steps_interactive.pm:952 install_steps_interactive.pm:960 -#: install_steps_interactive.pm:978 install_steps_interactive.pm:985 -#: install_steps_interactive.pm:1136 services.pm:133 +#: install_steps_interactive.pm:954 install_steps_interactive.pm:962 +#: install_steps_interactive.pm:980 install_steps_interactive.pm:987 +#: install_steps_interactive.pm:1138 services.pm:133 #: standalone/drakbackup:1585 #, c-format msgid "System" msgstr "系統" -#: install_steps_interactive.pm:992 install_steps_interactive.pm:1019 -#: install_steps_interactive.pm:1036 install_steps_interactive.pm:1052 -#: install_steps_interactive.pm:1063 +#: install_steps_interactive.pm:994 install_steps_interactive.pm:1021 +#: install_steps_interactive.pm:1038 install_steps_interactive.pm:1054 +#: install_steps_interactive.pm:1065 #, c-format msgid "Hardware" msgstr "硬體" -#: install_steps_interactive.pm:998 install_steps_interactive.pm:1007 +#: install_steps_interactive.pm:1000 install_steps_interactive.pm:1009 #, c-format msgid "Remote CUPS server" msgstr "遠端 CUPS 伺服器" -#: install_steps_interactive.pm:998 +#: install_steps_interactive.pm:1000 #, c-format msgid "No printer" msgstr "無印表機" -#: install_steps_interactive.pm:1040 +#: install_steps_interactive.pm:1042 #, c-format msgid "Do you have an ISA sound card?" msgstr "您有 ISA 音效卡嗎？" -#: install_steps_interactive.pm:1042 +#: install_steps_interactive.pm:1044 #, c-format msgid "" "Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound " "card" msgstr "請在安裝完畢後，執行 \"alsaconf\" 或 \"sndconfig\" 來設定您的音效卡" -#: install_steps_interactive.pm:1044 +#: install_steps_interactive.pm:1046 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "沒偵測到任何音效卡。請在安裝後嘗試 \"harddrake\" 進行設定" -#: install_steps_interactive.pm:1064 +#: install_steps_interactive.pm:1066 #, c-format msgid "Graphical interface" msgstr "圖形介面" -#: install_steps_interactive.pm:1070 install_steps_interactive.pm:1082 +#: install_steps_interactive.pm:1072 install_steps_interactive.pm:1084 #, c-format msgid "Network & Internet" msgstr "網路 & 網際網路" -#: install_steps_interactive.pm:1084 +#: install_steps_interactive.pm:1086 #, c-format msgid "configured" msgstr "已設定" -#: install_steps_interactive.pm:1093 install_steps_interactive.pm:1107 +#: install_steps_interactive.pm:1095 install_steps_interactive.pm:1109 #: security/level.pm:55 steps.pm:20 #, c-format msgid "Security" msgstr "安全性" -#: install_steps_interactive.pm:1112 +#: install_steps_interactive.pm:1114 #, c-format msgid "activated" msgstr "已啟用" -#: install_steps_interactive.pm:1112 +#: install_steps_interactive.pm:1114 #, c-format msgid "disabled" msgstr "已停用" -#: install_steps_interactive.pm:1123 +#: install_steps_interactive.pm:1125 #, c-format msgid "Boot" msgstr "重新開機" #. -PO: example: lilo-graphic on /dev/hda1 -#: install_steps_interactive.pm:1127 printer/printerdrake.pm:961 +#: install_steps_interactive.pm:1129 printer/printerdrake.pm:961 #, c-format msgid "%s on %s" msgstr "%2$s 上的 %1$s" -#: install_steps_interactive.pm:1141 services.pm:175 +#: install_steps_interactive.pm:1143 services.pm:175 #, c-format msgid "Services: %d activated for %d registered" msgstr "服務：%2$d 個註冊的服務中已經啟動了 %1$d 個" -#: install_steps_interactive.pm:1153 +#: install_steps_interactive.pm:1155 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "您尚未設定 X。您確定您真的要這樣做？" -#: install_steps_interactive.pm:1234 +#: install_steps_interactive.pm:1236 #, c-format msgid "Preparing bootloader..." msgstr "正在準備開機載入器..." -#: install_steps_interactive.pm:1244 +#: install_steps_interactive.pm:1246 #, c-format msgid "" "You appear to have an OldWorld or Unknown machine, the yaboot bootloader " @@ -6949,12 +6954,12 @@ msgstr "" "安裝還是會繼續下去，不過您將需要使用 bootX 或某些其他方法來啟動您的機器。" "root fs 的核心參數是：root=%s" -#: install_steps_interactive.pm:1250 +#: install_steps_interactive.pm:1252 #, c-format msgid "Do you want to use aboot?" msgstr "您要使用 aboot 嗎？" -#: install_steps_interactive.pm:1253 +#: install_steps_interactive.pm:1255 #, c-format msgid "" "Error installing aboot, \n" @@ -6963,29 +6968,29 @@ msgstr "" "安裝 aboot 時發生錯誤,\n" "您要冒著可能毀損第一個分割區的危險強制安裝嗎？" -#: install_steps_interactive.pm:1270 +#: install_steps_interactive.pm:1272 #, c-format msgid "" "In this security level, access to the files in the Windows partition is " "restricted to the administrator." msgstr "在這個安全等級中，只有管理者能夠存取位於 Windows 分割區的檔案。" -#: install_steps_interactive.pm:1299 standalone/drakautoinst:76 +#: install_steps_interactive.pm:1301 standalone/drakautoinst:76 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "請在 %s 中插入一片空白磁片" -#: install_steps_interactive.pm:1304 +#: install_steps_interactive.pm:1306 #, c-format msgid "Please insert another floppy for drivers disk" msgstr "請插入另一張磁片給驅動程式片" -#: install_steps_interactive.pm:1306 +#: install_steps_interactive.pm:1308 #, c-format msgid "Creating auto install floppy..." msgstr "正在製作自動安裝磁片..." -#: install_steps_interactive.pm:1318 +#: install_steps_interactive.pm:1320 #, c-format msgid "" "Some steps are not completed.\n" @@ -6996,19 +7001,19 @@ msgstr "" "\n" "您確定要結束安裝程式？" -#: install_steps_interactive.pm:1328 standalone/draksambashare:422 +#: install_steps_interactive.pm:1330 standalone/draksambashare:422 #: standalone/draksambashare:529 standalone/drakups:120 standalone/drakups:159 #: standalone/logdrake:452 standalone/logdrake:458 #, c-format msgid "Congratulations" msgstr "恭喜" -#: install_steps_interactive.pm:1336 install_steps_interactive.pm:1337 +#: install_steps_interactive.pm:1338 install_steps_interactive.pm:1339 #, c-format msgid "Generate auto install floppy" msgstr "製作自動安裝磁片" -#: install_steps_interactive.pm:1338 +#: install_steps_interactive.pm:1340 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" @@ -7041,7 +7046,7 @@ msgid "Choose a file" msgstr "選擇一個檔案" #: interactive.pm:321 interactive/gtk.pm:508 standalone/drakbackup:1526 -#: standalone/drakfont:657 standalone/drakhosts:242 standalone/draknfs:605 +#: standalone/drakfont:656 standalone/drakhosts:242 standalone/draknfs:605 #: standalone/draksambashare:1129 standalone/drakups:301 #: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:319 #: standalone/drakvpn:680 @@ -9630,49 +9635,49 @@ msgstr "" msgid "Use Interactive Firewall" msgstr "" -#: network/ifw.pm:138 +#: network/ifw.pm:129 #, c-format msgid "Port scanning" msgstr "通訊埠掃描" -#: network/ifw.pm:139 +#: network/ifw.pm:130 #, c-format msgid "Service attack" msgstr "攻擊服務" -#: network/ifw.pm:140 +#: network/ifw.pm:131 #, c-format msgid "Password cracking" msgstr "密碼破解" -#: network/ifw.pm:141 +#: network/ifw.pm:132 #, c-format msgid "\"%s\" attack" msgstr "\"%s\" 攻擊" -#: network/ifw.pm:143 +#: network/ifw.pm:134 #, c-format msgid "A port scanning attack has been attempted by %s." msgstr "%s 試圖發動通訊埠掃描攻擊。" -#: network/ifw.pm:144 +#: network/ifw.pm:135 #, c-format msgid "The %s service has been attacked by %s." msgstr "%2$s 試圖對 %1$s 服務發動攻擊。" -#: network/ifw.pm:145 +#: network/ifw.pm:136 #, c-format msgid "A password cracking attack has been attempted by %s." msgstr "%s 試圖發動密碼破解攻擊。" -#: network/ifw.pm:146 +#: network/ifw.pm:137 #, c-format msgid "A \"%s\" attack has been attempted by %s" msgstr "%2$s 試圖發動 \"%1$s\" 攻擊" #: network/isdn.pm:117 network/netconnect.pm:464 network/netconnect.pm:558 -#: network/netconnect.pm:561 network/netconnect.pm:704 -#: network/netconnect.pm:708 +#: network/netconnect.pm:561 network/netconnect.pm:709 +#: network/netconnect.pm:713 #, c-format msgid "Unlisted - edit manually" msgstr "" @@ -9939,12 +9944,12 @@ msgstr "" msgid "Choose the connection you want to configure" msgstr "選擇您要設定的連線項目" -#: network/netconnect.pm:288 network/netconnect.pm:782 +#: network/netconnect.pm:288 network/netconnect.pm:787 #, c-format msgid "Connection Configuration" msgstr "連線組態設定" -#: network/netconnect.pm:288 network/netconnect.pm:783 +#: network/netconnect.pm:288 network/netconnect.pm:788 #, c-format msgid "Please fill or check the field below" msgstr "請您填入或檢查下面欄位" @@ -9954,7 +9959,7 @@ msgstr "請您填入或檢查下面欄位" msgid "Your personal phone number" msgstr "您的個人電話號碼" -#: network/netconnect.pm:292 network/netconnect.pm:786 +#: network/netconnect.pm:292 network/netconnect.pm:791 #, c-format msgid "Provider name (ex provider.net)" msgstr "提供者的名稱 (ex provider.net)" @@ -9991,13 +9996,13 @@ msgid "Connection timeout (in sec)" msgstr "連線逾時 (以秒為單位)" #: network/netconnect.pm:299 network/netconnect.pm:324 -#: network/netconnect.pm:789 standalone/drakconnect:491 +#: network/netconnect.pm:794 standalone/drakconnect:491 #, c-format msgid "Account Login (user name)" msgstr "帳號登入 (使用者名稱)" #: network/netconnect.pm:300 network/netconnect.pm:325 -#: network/netconnect.pm:790 standalone/drakconnect:492 +#: network/netconnect.pm:795 standalone/drakconnect:492 #, c-format msgid "Account Password" msgstr "帳號的密碼" @@ -10038,13 +10043,13 @@ msgid "Use BPALogin (needed for Telstra)" msgstr "" #: network/netconnect.pm:349 network/netconnect.pm:671 -#: network/netconnect.pm:822 network/netconnect.pm:1167 +#: network/netconnect.pm:827 network/netconnect.pm:1172 #, c-format msgid "Select the network interface to configure:" msgstr "選取要設定的網路介面：" #: network/netconnect.pm:351 network/netconnect.pm:386 -#: network/netconnect.pm:672 network/netconnect.pm:824 network/shorewall.pm:70 +#: network/netconnect.pm:672 network/netconnect.pm:829 network/shorewall.pm:70 #: standalone/drakconnect:713 #, c-format msgid "Net Device" @@ -10137,7 +10142,7 @@ msgstr "" "如果並沒有包含在清單內, 請選則未列在清單內(Unlisted)." #: network/netconnect.pm:463 network/netconnect.pm:557 -#: network/netconnect.pm:703 +#: network/netconnect.pm:708 #, c-format msgid "Provider:" msgstr "提供者:" @@ -10196,7 +10201,7 @@ msgstr "撥號: IP 參數" msgid "IP parameters" msgstr "IP 參數" -#: network/netconnect.pm:603 network/netconnect.pm:938 +#: network/netconnect.pm:603 network/netconnect.pm:943 #: printer/printerdrake.pm:460 standalone/drakconnect:109 #: standalone/drakconnect:316 standalone/drakconnect:882 #: standalone/drakhosts:197 standalone/drakroam:122 standalone/drakups:286 @@ -10224,13 +10229,13 @@ msgstr "DNS" msgid "Domain name" msgstr "網域名稱" -#: network/netconnect.pm:621 network/netconnect.pm:787 +#: network/netconnect.pm:621 network/netconnect.pm:792 #: standalone/drakconnect:992 #, c-format msgid "First DNS Server (optional)" msgstr "第一台 DNS 伺服器 (選擇性輸入)" -#: network/netconnect.pm:622 network/netconnect.pm:788 +#: network/netconnect.pm:622 network/netconnect.pm:793 #: standalone/drakconnect:993 #, c-format msgid "Second DNS Server (optional)" @@ -10256,66 +10261,66 @@ msgstr "閘道 IP 位址" msgid "ADSL configuration" msgstr "ADSL 設定" -#: network/netconnect.pm:701 +#: network/netconnect.pm:706 #, c-format msgid "Please choose your ADSL provider" msgstr "請選擇您的 ADSL 提供者" -#: network/netconnect.pm:731 +#: network/netconnect.pm:736 #, c-format msgid "" "Please choose your DSL connection type.\n" "If you do not know it, keep the preselected type." msgstr "" -#: network/netconnect.pm:734 +#: network/netconnect.pm:739 #, c-format msgid "ADSL connection type:" msgstr "ADSL 連線型態:" -#: network/netconnect.pm:792 +#: network/netconnect.pm:797 #, c-format msgid "Virtual Path ID (VPI):" msgstr "" -#: network/netconnect.pm:793 +#: network/netconnect.pm:798 #, c-format msgid "Virtual Circuit ID (VCI):" msgstr "" -#: network/netconnect.pm:796 +#: network/netconnect.pm:801 #, c-format msgid "Encapsulation:" msgstr "封裝:" -#: network/netconnect.pm:826 +#: network/netconnect.pm:831 #, c-format msgid "Manually load a driver" msgstr "手動載入驅動程式" -#: network/netconnect.pm:827 +#: network/netconnect.pm:832 #, c-format msgid "Use a Windows driver (with ndiswrapper)" msgstr "使用 Windows 驅動程式 (藉由 ndiswrapper)" -#: network/netconnect.pm:893 +#: network/netconnect.pm:898 #, c-format msgid "Zeroconf hostname resolution" msgstr "Zeroconf 主機名稱解析" -#: network/netconnect.pm:894 network/netconnect.pm:925 +#: network/netconnect.pm:899 network/netconnect.pm:930 #, c-format msgid "Configuring network device %s (driver %s)" msgstr "正在設定網路裝置 %s (驅動程式 %s)" -#: network/netconnect.pm:895 +#: network/netconnect.pm:900 #, c-format msgid "" "The following protocols can be used to configure a LAN connection. Please " "choose the one you want to use" msgstr "" -#: network/netconnect.pm:926 +#: network/netconnect.pm:931 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" @@ -10326,198 +10331,198 @@ msgstr "" "每個項目都應該用小數點間隔的 IP 位址來輸入\n" "(例如 1.2.3.4)。" -#: network/netconnect.pm:933 standalone/drakconnect:373 +#: network/netconnect.pm:938 standalone/drakconnect:373 #, c-format msgid "Assign host name from DHCP address" msgstr "由 DHCP 位址指派主機名稱" -#: network/netconnect.pm:934 standalone/drakconnect:375 +#: network/netconnect.pm:939 standalone/drakconnect:375 #, c-format msgid "DHCP host name" msgstr "DHCP 主機名稱" -#: network/netconnect.pm:939 standalone/drakconnect:321 +#: network/netconnect.pm:944 standalone/drakconnect:321 #: standalone/drakconnect:883 standalone/drakgw:181 #, c-format msgid "Netmask" msgstr "網路遮罩" -#: network/netconnect.pm:941 standalone/drakconnect:437 +#: network/netconnect.pm:946 standalone/drakconnect:437 #, c-format msgid "Track network card id (useful for laptops)" msgstr "紀錄網路卡的 ID (對於筆記型電腦相當有用)" -#: network/netconnect.pm:942 standalone/drakconnect:438 +#: network/netconnect.pm:947 standalone/drakconnect:438 #, c-format msgid "Network Hotplugging" msgstr "網路熱插拔" -#: network/netconnect.pm:944 standalone/drakconnect:432 +#: network/netconnect.pm:949 standalone/drakconnect:432 #, c-format msgid "Start at boot" msgstr "於開機時啟動" -#: network/netconnect.pm:946 standalone/drakconnect:460 +#: network/netconnect.pm:951 standalone/drakconnect:460 #, c-format msgid "Metric" msgstr "公制" -#: network/netconnect.pm:947 +#: network/netconnect.pm:952 #, c-format msgid "Enable IPv6 to IPv4 tunnel" msgstr "" -#: network/netconnect.pm:949 standalone/drakconnect:369 +#: network/netconnect.pm:954 standalone/drakconnect:369 #: standalone/drakconnect:886 #, c-format msgid "DHCP client" msgstr "DHCP 用戶端" -#: network/netconnect.pm:951 standalone/drakconnect:379 +#: network/netconnect.pm:956 standalone/drakconnect:379 #, c-format msgid "DHCP timeout (in seconds)" msgstr "DHCP 連線逾時 (以秒為單位)" -#: network/netconnect.pm:952 standalone/drakconnect:382 +#: network/netconnect.pm:957 standalone/drakconnect:382 #, c-format msgid "Get DNS servers from DHCP" msgstr "由 DHCP 取得 DNS 主機" -#: network/netconnect.pm:953 standalone/drakconnect:383 +#: network/netconnect.pm:958 standalone/drakconnect:383 #, c-format msgid "Get YP servers from DHCP" msgstr "由 DHCP 取得 YP 伺服器" -#: network/netconnect.pm:954 standalone/drakconnect:384 +#: network/netconnect.pm:959 standalone/drakconnect:384 #, c-format msgid "Get NTPD servers from DHCP" msgstr "由 DHCP 取得 NTPD 伺服器" -#: network/netconnect.pm:962 printer/printerdrake.pm:1876 +#: network/netconnect.pm:967 printer/printerdrake.pm:1876 #: standalone/drakconnect:676 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "IP 位址應該是 1.2.3.4 這類的格式" -#: network/netconnect.pm:966 standalone/drakconnect:680 +#: network/netconnect.pm:971 standalone/drakconnect:680 #, c-format msgid "Netmask should be in format 255.255.224.0" msgstr "網路遮罩應該是 255.255.224.0 這類的格式" -#: network/netconnect.pm:970 +#: network/netconnect.pm:975 #, c-format msgid "Warning: IP address %s is usually reserved!" msgstr "警告：IP 位址 %s 通常是保留下來的！" -#: network/netconnect.pm:975 standalone/drakTermServ:1856 +#: network/netconnect.pm:980 standalone/drakTermServ:1856 #: standalone/drakTermServ:1857 standalone/drakTermServ:1858 #, c-format msgid "%s already in use\n" msgstr "%s 已經在使用中了\n" -#: network/netconnect.pm:1015 +#: network/netconnect.pm:1020 #, c-format msgid "Choose an ndiswrapper driver" msgstr "選擇一個 ndiswrapper 驅動程式" -#: network/netconnect.pm:1017 +#: network/netconnect.pm:1022 #, c-format msgid "Use the ndiswrapper driver %s" msgstr "" -#: network/netconnect.pm:1017 +#: network/netconnect.pm:1022 #, c-format msgid "Install a new driver" msgstr "安裝一個新的驅動程式" -#: network/netconnect.pm:1029 +#: network/netconnect.pm:1034 #, c-format msgid "Select a device:" msgstr "" -#: network/netconnect.pm:1058 +#: network/netconnect.pm:1063 #, c-format msgid "Please enter the wireless parameters for this card:" msgstr "請輸入這張卡的無線網路參數：" -#: network/netconnect.pm:1061 standalone/drakconnect:404 +#: network/netconnect.pm:1066 standalone/drakconnect:404 #: standalone/drakroam:52 #, c-format msgid "Operating Mode" msgstr "運作模式" -#: network/netconnect.pm:1062 +#: network/netconnect.pm:1067 #, c-format msgid "Ad-hoc" msgstr "" -#: network/netconnect.pm:1062 +#: network/netconnect.pm:1067 #, c-format msgid "Managed" msgstr "" -#: network/netconnect.pm:1062 +#: network/netconnect.pm:1067 #, c-format msgid "Master" msgstr "" -#: network/netconnect.pm:1062 +#: network/netconnect.pm:1067 #, c-format msgid "Repeater" msgstr "重複器" -#: network/netconnect.pm:1062 +#: network/netconnect.pm:1067 #, c-format msgid "Secondary" msgstr "第二的" -#: network/netconnect.pm:1062 +#: network/netconnect.pm:1067 #, c-format msgid "Auto" msgstr "自動" -#: network/netconnect.pm:1065 standalone/drakconnect:405 +#: network/netconnect.pm:1070 standalone/drakconnect:405 #: standalone/drakroam:115 #, c-format msgid "Network name (ESSID)" msgstr "網路名稱 (ESSID)" -#: network/netconnect.pm:1066 standalone/drakroam:116 +#: network/netconnect.pm:1071 standalone/drakroam:116 #, c-format msgid "Encryption mode" msgstr "" -#: network/netconnect.pm:1071 +#: network/netconnect.pm:1076 #, c-format msgid "Allow access point roaming" msgstr "" -#: network/netconnect.pm:1073 standalone/drakconnect:406 +#: network/netconnect.pm:1078 standalone/drakconnect:406 #, c-format msgid "Network ID" msgstr "網路 ID" -#: network/netconnect.pm:1074 standalone/drakconnect:407 +#: network/netconnect.pm:1079 standalone/drakconnect:407 #, c-format msgid "Operating frequency" msgstr "工作頻率" -#: network/netconnect.pm:1075 standalone/drakconnect:408 +#: network/netconnect.pm:1080 standalone/drakconnect:408 #, c-format msgid "Sensitivity threshold" msgstr "" -#: network/netconnect.pm:1076 standalone/drakconnect:409 +#: network/netconnect.pm:1081 standalone/drakconnect:409 #, c-format msgid "Bitrate (in b/s)" msgstr "連線速率 (b/s)" -#: network/netconnect.pm:1077 standalone/drakconnect:420 +#: network/netconnect.pm:1082 standalone/drakconnect:420 #, c-format msgid "RTS/CTS" msgstr "" -#: network/netconnect.pm:1078 +#: network/netconnect.pm:1083 #, c-format msgid "" "RTS/CTS adds a handshake before each packet transmission to make sure that " @@ -10531,17 +10536,17 @@ msgid "" "or off." msgstr "" -#: network/netconnect.pm:1085 standalone/drakconnect:421 +#: network/netconnect.pm:1090 standalone/drakconnect:421 #, c-format msgid "Fragmentation" msgstr "破碎片段" -#: network/netconnect.pm:1086 standalone/drakconnect:422 +#: network/netconnect.pm:1091 standalone/drakconnect:422 #, c-format msgid "iwconfig command extra arguments" msgstr "" -#: network/netconnect.pm:1087 +#: network/netconnect.pm:1092 #, c-format msgid "" "Here, one can configure some extra wireless parameters such as:\n" @@ -10552,12 +10557,12 @@ msgid "" msgstr "" #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one -#: network/netconnect.pm:1094 standalone/drakconnect:423 +#: network/netconnect.pm:1099 standalone/drakconnect:423 #, c-format msgid "iwspy command extra arguments" msgstr "" -#: network/netconnect.pm:1095 +#: network/netconnect.pm:1100 #, c-format msgid "" "iwspy is used to set a list of addresses in a wireless network\n" @@ -10569,12 +10574,12 @@ msgid "" "See iwpspy(8) man page for further information." msgstr "" -#: network/netconnect.pm:1104 standalone/drakconnect:424 +#: network/netconnect.pm:1109 standalone/drakconnect:424 #, c-format msgid "iwpriv command extra arguments" msgstr "" -#: network/netconnect.pm:1105 +#: network/netconnect.pm:1110 #, c-format msgid "" "iwpriv enable to set up optionals (private) parameters of a wireless " @@ -10592,51 +10597,51 @@ msgid "" "See iwpriv(8) man page for further information." msgstr "" -#: network/netconnect.pm:1120 +#: network/netconnect.pm:1125 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" -#: network/netconnect.pm:1124 +#: network/netconnect.pm:1129 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" -#: network/netconnect.pm:1167 +#: network/netconnect.pm:1172 #, c-format msgid "DVB configuration" msgstr "" -#: network/netconnect.pm:1168 +#: network/netconnect.pm:1173 #, c-format msgid "DVB Adapter" msgstr "" -#: network/netconnect.pm:1185 +#: network/netconnect.pm:1190 #, c-format msgid "DVB adapter settings" msgstr "" -#: network/netconnect.pm:1188 +#: network/netconnect.pm:1193 #, c-format msgid "Adapter card" msgstr "" -#: network/netconnect.pm:1189 +#: network/netconnect.pm:1194 #, c-format msgid "Net demux" msgstr "" -#: network/netconnect.pm:1190 +#: network/netconnect.pm:1195 #, c-format msgid "PID" msgstr "PID (行程編號)" -#: network/netconnect.pm:1218 +#: network/netconnect.pm:1223 #, c-format msgid "" "Please enter your host name.\n" @@ -10649,67 +10654,67 @@ msgstr "" "類似 ``mybox.mylab.myco.com'' 的格式.\n" "使用閘道器的話, 也請在這邊輸入閘道器的 IP 位址." -#: network/netconnect.pm:1223 +#: network/netconnect.pm:1228 #, c-format msgid "Last but not least you can also type in your DNS server IP addresses." msgstr "" -#: network/netconnect.pm:1225 standalone/drakconnect:991 +#: network/netconnect.pm:1230 standalone/drakconnect:991 #, c-format msgid "Host name (optional)" msgstr "主機名稱 (選擇性輸入)" -#: network/netconnect.pm:1225 standalone/drakhosts:197 +#: network/netconnect.pm:1230 standalone/drakhosts:197 #, c-format msgid "Host name" msgstr "主機名稱" -#: network/netconnect.pm:1227 +#: network/netconnect.pm:1232 #, c-format msgid "DNS server 1" msgstr "DNS 伺服器 1" -#: network/netconnect.pm:1228 +#: network/netconnect.pm:1233 #, c-format msgid "DNS server 2" msgstr "DNS 伺服器 2" -#: network/netconnect.pm:1229 +#: network/netconnect.pm:1234 #, c-format msgid "DNS server 3" msgstr "DNS 伺服器 3" -#: network/netconnect.pm:1230 +#: network/netconnect.pm:1235 #, c-format msgid "Search domain" msgstr "搜尋網域" -#: network/netconnect.pm:1231 +#: network/netconnect.pm:1236 #, c-format msgid "By default search domain will be set from the fully-qualified host name" msgstr "" -#: network/netconnect.pm:1232 +#: network/netconnect.pm:1237 #, c-format msgid "Gateway (e.g. %s)" msgstr "閘道器 (比方 %s)" -#: network/netconnect.pm:1234 +#: network/netconnect.pm:1239 #, c-format msgid "Gateway device" msgstr "閘道器裝置" -#: network/netconnect.pm:1243 +#: network/netconnect.pm:1248 #, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "DNS 伺服器位址必須要用 1.2.3.4 的格式來輸入" -#: network/netconnect.pm:1248 standalone/drakconnect:685 +#: network/netconnect.pm:1253 standalone/drakconnect:685 #, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "Gateway 位址必須要用類似 1.2.3.4 的格式來輸入" -#: network/netconnect.pm:1261 +#: network/netconnect.pm:1266 #, c-format msgid "" "If desired, enter a Zeroconf hostname.\n" @@ -10718,67 +10723,67 @@ msgid "" "It is not necessary on most networks." msgstr "" -#: network/netconnect.pm:1265 +#: network/netconnect.pm:1270 #, c-format msgid "Zeroconf Host name" msgstr "Zeroconf 主機名稱" -#: network/netconnect.pm:1268 +#: network/netconnect.pm:1273 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "" -#: network/netconnect.pm:1278 +#: network/netconnect.pm:1283 #, c-format msgid "Do you want to allow users to start the connection?" msgstr "您要在允許使用者啟動該連線嗎?" -#: network/netconnect.pm:1291 +#: network/netconnect.pm:1296 #, c-format msgid "Do you want to start the connection at boot?" msgstr "您要在開機時自動啟動該連線嗎?" -#: network/netconnect.pm:1307 +#: network/netconnect.pm:1312 #, c-format msgid "Automatically at boot" msgstr "自動於開機時" -#: network/netconnect.pm:1309 +#: network/netconnect.pm:1314 #, c-format msgid "By using Net Applet in the system tray" msgstr "" -#: network/netconnect.pm:1311 +#: network/netconnect.pm:1316 #, c-format msgid "Manually (the interface would still be activated at boot)" msgstr "" -#: network/netconnect.pm:1320 +#: network/netconnect.pm:1325 #, c-format msgid "How do you want to dial this connection?" msgstr "您想要如何撥接這個連線?" -#: network/netconnect.pm:1333 +#: network/netconnect.pm:1338 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "現在您想要試著連線到 Internet 上面嗎?" -#: network/netconnect.pm:1341 standalone/drakconnect:1023 +#: network/netconnect.pm:1346 standalone/drakconnect:1023 #, c-format msgid "Testing your connection..." msgstr "正在測試您的連線..." -#: network/netconnect.pm:1366 +#: network/netconnect.pm:1371 #, c-format msgid "The system is now connected to the Internet." msgstr "系統現在連上 Internet 了." -#: network/netconnect.pm:1367 +#: network/netconnect.pm:1372 #, c-format msgid "For security reasons, it will be disconnected now." msgstr "因為安全因素考量, 它現在將會被切斷連線." -#: network/netconnect.pm:1368 +#: network/netconnect.pm:1373 #, c-format msgid "" "The system does not seem to be connected to the Internet.\n" @@ -10787,7 +10792,7 @@ msgstr "" "系統目前看起來似乎並沒有連上 Internet.\n" "請嘗試重新設定您的連線." -#: network/netconnect.pm:1383 +#: network/netconnect.pm:1388 #, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" @@ -10796,7 +10801,7 @@ msgstr "" "恭喜！網路與網際網路組態已經設定完成了。\n" "\n" -#: network/netconnect.pm:1386 +#: network/netconnect.pm:1391 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " @@ -10805,7 +10810,7 @@ msgstr "" "在完成這個項目後, 我們建議您重新啟動您的 X 環境\n" "以避免因為您調整了主機名稱造成 X 的問題." -#: network/netconnect.pm:1387 +#: network/netconnect.pm:1392 #, c-format msgid "" "Problems occurred during configuration.\n" @@ -10816,28 +10821,28 @@ msgstr "" "以 net_monitor 或 mcc 測試您的連線狀態. 若是您發現您的網路連線並不作用, 您或" "許需要重新再進行設定." -#: network/netconnect.pm:1398 +#: network/netconnect.pm:1403 #, c-format msgid "(detected on port %s)" msgstr "(於 port %s 被偵測到)" #. -PO: here, "(detected)" string will be appended to eg "ADSL connection" -#: network/netconnect.pm:1400 +#: network/netconnect.pm:1405 #, c-format msgid "(detected %s)" msgstr "(偵測到 %s)" -#: network/netconnect.pm:1400 +#: network/netconnect.pm:1405 #, c-format msgid "(detected)" msgstr "(被偵測到)" -#: network/netconnect.pm:1401 +#: network/netconnect.pm:1406 #, c-format msgid "Network Configuration" msgstr "網路設定" -#: network/netconnect.pm:1402 +#: network/netconnect.pm:1407 #, c-format msgid "" "Because you are doing a network installation, your network is already " @@ -10849,12 +10854,12 @@ msgstr "" "您可以點選確定 Ok 保留您的設定組態, 或者是選取取消 cancel\n" "來重新設定網路 & 網際網路連線.\n" -#: network/netconnect.pm:1405 +#: network/netconnect.pm:1410 #, c-format msgid "The network needs to be restarted. Do you want to restart it?" msgstr "網路需要被重新啟動. 您想要重新啟動它嗎?" -#: network/netconnect.pm:1406 +#: network/netconnect.pm:1411 #, c-format msgid "" "A problem occurred while restarting the network: \n" @@ -10865,7 +10870,7 @@ msgstr "" "\n" "%s" -#: network/netconnect.pm:1407 +#: network/netconnect.pm:1412 #, c-format msgid "" "We are now going to configure the %s connection.\n" @@ -10878,12 +10883,12 @@ msgstr "" "\n" "按 \"%s\" 繼續." -#: network/netconnect.pm:1408 +#: network/netconnect.pm:1413 #, c-format msgid "Configuration is complete, do you want to apply settings?" msgstr "設定完成, 您想要套用設定值?" -#: network/netconnect.pm:1409 +#: network/netconnect.pm:1414 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" @@ -10894,12 +10899,12 @@ msgstr "" "請您選擇其中一個要使用的項目.\n" "\n" -#: network/netconnect.pm:1410 +#: network/netconnect.pm:1415 #, c-format msgid "Internet connection" msgstr "Internet 連線" -#: network/netconnect.pm:1427 +#: network/netconnect.pm:1432 #, c-format msgid "" "An unexpected error has happened:\n" @@ -17407,7 +17412,7 @@ msgstr "不要包含瀏覽器的快取資料檔" msgid "Select the files or directories and click on 'OK'" msgstr "選取檔案或者是目錄, 然後點選 '加入'" -#: standalone/drakbackup:1527 standalone/drakfont:658 +#: standalone/drakbackup:1527 standalone/drakfont:657 #, c-format msgid "Remove Selected" msgstr "移除選取項目" @@ -19283,109 +19288,109 @@ msgid "" "Are you really sure that you want to restart the dm service?" msgstr "" -#: standalone/drakfont:183 +#: standalone/drakfont:182 #, c-format msgid "Search installed fonts" msgstr "尋找已安裝字型" -#: standalone/drakfont:185 +#: standalone/drakfont:184 #, c-format msgid "Unselect fonts installed" msgstr "反向選取已安裝字型" -#: standalone/drakfont:208 +#: standalone/drakfont:207 #, c-format msgid "parse all fonts" msgstr "解析所有字型" -#: standalone/drakfont:210 +#: standalone/drakfont:209 #, c-format msgid "No fonts found" msgstr "找不到字型" -#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327 -#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394 -#: standalone/drakfont:412 standalone/drakfont:426 +#: standalone/drakfont:217 standalone/drakfont:259 standalone/drakfont:326 +#: standalone/drakfont:359 standalone/drakfont:367 standalone/drakfont:393 +#: standalone/drakfont:411 standalone/drakfont:425 #, c-format msgid "done" msgstr "完成" -#: standalone/drakfont:223 +#: standalone/drakfont:222 #, c-format msgid "Could not find any font in your mounted partitions" msgstr "在已經掛載的分割區內找不到任何字型" -#: standalone/drakfont:258 +#: standalone/drakfont:257 #, c-format msgid "Reselect correct fonts" msgstr "重新選取正確的字型" -#: standalone/drakfont:261 +#: standalone/drakfont:260 #, c-format msgid "Could not find any font.\n" msgstr "找不到任何字型。\n" -#: standalone/drakfont:271 +#: standalone/drakfont:270 #, c-format msgid "Search for fonts in installed list" msgstr "於已安裝清單內搜尋字型" -#: standalone/drakfont:296 +#: standalone/drakfont:295 #, c-format msgid "%s fonts conversion" msgstr "%s 字型轉換" -#: standalone/drakfont:325 +#: standalone/drakfont:324 #, c-format msgid "Fonts copy" msgstr "字型複製" -#: standalone/drakfont:328 +#: standalone/drakfont:327 #, c-format msgid "True Type fonts installation" msgstr "True Type 字體檔安裝" -#: standalone/drakfont:335 +#: standalone/drakfont:334 #, c-format msgid "please wait during ttmkfdir..." msgstr "請稍候，執行 ttmkfdir 程式中..." -#: standalone/drakfont:336 +#: standalone/drakfont:335 #, c-format msgid "True Type install done" msgstr "True Type 字體安裝完成" -#: standalone/drakfont:342 standalone/drakfont:357 +#: standalone/drakfont:341 standalone/drakfont:356 #, c-format msgid "type1inst building" msgstr "" -#: standalone/drakfont:351 +#: standalone/drakfont:350 #, c-format msgid "Ghostscript referencing" msgstr "" -#: standalone/drakfont:361 +#: standalone/drakfont:360 #, c-format msgid "Suppress Temporary Files" msgstr "不刪除暫存檔案" -#: standalone/drakfont:364 +#: standalone/drakfont:363 #, c-format msgid "Restart XFS" msgstr "重新啟動 XFS 服務" -#: standalone/drakfont:410 standalone/drakfont:420 +#: standalone/drakfont:409 standalone/drakfont:419 #, c-format msgid "Suppress Fonts Files" msgstr "不刪除字型檔" -#: standalone/drakfont:422 +#: standalone/drakfont:421 #, c-format msgid "xfs restart" msgstr "XFS 服務重新啟動" -#: standalone/drakfont:430 +#: standalone/drakfont:429 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " @@ -19399,38 +19404,38 @@ msgstr "" "您仍然可以用正常方式安裝字型。在極端情況下，不正確的字型\n" "可能會使您的 X 伺服器中止或失去回應。" -#: standalone/drakfont:474 standalone/drakfont:483 +#: standalone/drakfont:473 standalone/drakfont:482 #, c-format msgid "DrakFont" msgstr "DrakFont" -#: standalone/drakfont:484 +#: standalone/drakfont:483 #, c-format msgid "Font List" msgstr "字型清單" -#: standalone/drakfont:487 +#: standalone/drakfont:486 #, c-format msgid "Get Windows Fonts" msgstr "" -#: standalone/drakfont:493 +#: standalone/drakfont:492 #, c-format msgid "About" msgstr "關於" -#: standalone/drakfont:495 standalone/drakfont:689 standalone/drakfont:727 +#: standalone/drakfont:494 standalone/drakfont:686 standalone/drakfont:724 #, c-format msgid "Uninstall" msgstr "移除" -#: standalone/drakfont:496 +#: standalone/drakfont:495 #, c-format msgid "Import" msgstr "匯入" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX -#: standalone/drakfont:514 +#: standalone/drakfont:513 #, c-format msgid "" "Copyright (C) 2001-2002 by Mandriva \n" @@ -19443,7 +19448,7 @@ msgid "" " VIGNAUD Thierry " msgstr "" -#: standalone/drakfont:523 +#: standalone/drakfont:522 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" @@ -19463,7 +19468,7 @@ msgid "" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA." msgstr "" -#: standalone/drakfont:539 +#: standalone/drakfont:538 #, c-format msgid "" "Thanks:\n" @@ -19481,112 +19486,112 @@ msgid "" " Convert ttf font files to afm and pfb fonts\n" msgstr "" -#: standalone/drakfont:558 +#: standalone/drakfont:557 #, c-format msgid "Choose the applications that will support the fonts:" msgstr "選擇能夠使用該字體的應用程式：" -#: standalone/drakfont:569 +#: standalone/drakfont:568 #, c-format msgid "Ghostscript" msgstr "GhostScript" -#: standalone/drakfont:570 +#: standalone/drakfont:569 #, c-format msgid "StarOffice" msgstr "StarOffice" -#: standalone/drakfont:571 +#: standalone/drakfont:570 #, c-format msgid "Abiword" msgstr "Abiword" -#: standalone/drakfont:572 +#: standalone/drakfont:571 #, c-format msgid "Generic Printers" msgstr "一般印表機" -#: standalone/drakfont:586 +#: standalone/drakfont:585 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "選取字型檔案或者是所在目錄, 點選 '加入'" -#: standalone/drakfont:587 +#: standalone/drakfont:586 #, c-format msgid "File Selection" msgstr "檔案選取" -#: standalone/drakfont:591 +#: standalone/drakfont:590 #, c-format msgid "Fonts" msgstr "字形" -#: standalone/drakfont:654 +#: standalone/drakfont:653 #, c-format msgid "Import fonts" msgstr "匯入字型" -#: standalone/drakfont:659 +#: standalone/drakfont:658 #, c-format msgid "Install fonts" msgstr "安裝字型" -#: standalone/drakfont:694 +#: standalone/drakfont:691 #, c-format msgid "click here if you are sure." msgstr "確定的話請點選這裡" -#: standalone/drakfont:696 +#: standalone/drakfont:693 #, c-format msgid "here if no." msgstr "不確定點選這裡" -#: standalone/drakfont:735 +#: standalone/drakfont:732 #, c-format msgid "Unselected All" msgstr "取消選取所有項目" -#: standalone/drakfont:738 +#: standalone/drakfont:735 #, c-format msgid "Selected All" msgstr "選取所有項目" -#: standalone/drakfont:741 +#: standalone/drakfont:738 #, c-format msgid "Remove List" msgstr "移除清單" -#: standalone/drakfont:752 standalone/drakfont:771 +#: standalone/drakfont:749 standalone/drakfont:768 #, c-format msgid "Importing fonts" msgstr "正在匯入字型" -#: standalone/drakfont:756 standalone/drakfont:776 +#: standalone/drakfont:753 standalone/drakfont:773 #, c-format msgid "Initial tests" msgstr "初始測試" -#: standalone/drakfont:757 +#: standalone/drakfont:754 #, c-format msgid "Copy fonts on your system" msgstr "複製字體至系統" -#: standalone/drakfont:758 +#: standalone/drakfont:755 #, c-format msgid "Install & convert Fonts" msgstr "安裝與轉換字體" -#: standalone/drakfont:759 +#: standalone/drakfont:756 #, c-format msgid "Post Install" msgstr "後續安裝設定" -#: standalone/drakfont:777 +#: standalone/drakfont:774 #, c-format msgid "Remove fonts on your system" msgstr "由您的系統移除該字體檔案" -#: standalone/drakfont:778 +#: standalone/drakfont:775 #, c-format msgid "Post Uninstall" msgstr "後續反安裝設定" @@ -22858,6 +22863,11 @@ msgstr "" "\n" "http://www.mandrivalinux.com/en/hardware.php3" +#: standalone/finish-install:38 standalone/keyboarddrake:30 +#, c-format +msgid "Please, choose your keyboard layout." +msgstr "請選取鍵盤排列的格式是那一種。" + #: standalone/harddrake2:25 #, c-format msgid "Alternative drivers" @@ -23649,11 +23659,6 @@ msgstr "帳號：" msgid "Hostname:" msgstr "主機名稱：" -#: standalone/keyboarddrake:30 -#, c-format -msgid "Please, choose your keyboard layout." -msgstr "請選取鍵盤排列的格式是那一種。" - #: standalone/keyboarddrake:45 #, c-format msgid "Do you want the BackSpace to return Delete in console?" @@ -24910,11 +24915,6 @@ msgstr "選擇安裝類別" msgid "Choose your keyboard" msgstr "選取鍵盤形式" -#: steps.pm:21 -#, c-format -msgid "Partitioning" -msgstr "分割磁區" - #: steps.pm:22 #, c-format msgid "Format partitions" @@ -25029,6 +25029,19 @@ msgstr "" msgid "Installation failed" msgstr "安裝失敗" +#~ msgid "" +#~ "Allow an ordinary user to mount the file system. The\n" +#~ "name of the mounting user is written to mtab so that he can unmount the " +#~ "file\n" +#~ "system again. This option implies the options noexec, nosuid, and nodev\n" +#~ "(unless overridden by subsequent options, as in the option line\n" +#~ "user,exec,dev,suid )." +#~ msgstr "" +#~ "允許一般使用者掛載檔案系統。\n" +#~ "掛載的使用者名稱會被寫入 mtab 因此他可以卸載檔案系統。\n" +#~ "這個選項套用了 noexec、nosuid 以及 nodev 的參數\n" +#~ "(除非被以下參數複寫，例如選項行 user、exec、dev、suid 參數)。" + #~ msgid "Unknown Model" #~ msgstr "未知的型號" -- cgit v1.2.1