From 27aafb30cb54246ad3f8cf023a8019f5a9412d7d Mon Sep 17 00:00:00 2001
From: Funda Wang <fwang@mandriva.org>
Date: Sun, 5 Mar 2006 11:30:26 +0000
Subject: Updated POT file.

---
 perl-install/share/po/zh_TW.po | 1550 ++++++++++++++++++++--------------------
 1 file changed, 766 insertions(+), 784 deletions(-)

(limited to 'perl-install/share/po/zh_TW.po')

diff --git a/perl-install/share/po/zh_TW.po b/perl-install/share/po/zh_TW.po
index a044b35e5..c2acc66c1 100644
--- a/perl-install/share/po/zh_TW.po
+++ b/perl-install/share/po/zh_TW.po
@@ -18,7 +18,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2006-01-26 11:06+0100\n"
+"POT-Creation-Date: 2006-03-05 18:57+0800\n"
 "PO-Revision-Date: 2006-03-03 21:30+0800\n"
 "Last-Translator: You-Cheng Hsieh <yochenhsieh@xuite.net>\n"
 "Language-Team: Traditional Chinese <zh@li.org>\n"
@@ -87,7 +87,7 @@ msgstr ""
 "請按下此按鈕來重新開機，移除隨身碟並解除它的寫入保護，接著重\n"
 "新插入隨身碟，最後重新啟動 Mandriva Move。"
 
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1303
+#: ../move/move.pm:468 help.pm:410 install_steps_interactive.pm:1303
 #, c-format
 msgid "Reboot"
 msgstr "重新開機"
@@ -178,7 +178,7 @@ msgstr "請稍候，正在偵測與設定裝置中..."
 #: diskdrake/interactive.pm:244 diskdrake/interactive.pm:405
 #: diskdrake/interactive.pm:423 diskdrake/interactive.pm:560
 #: diskdrake/interactive.pm:565 diskdrake/smbnfs_gtk.pm:41 do_pkgs.pm:19
-#: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:217 install_any.pm:1775
+#: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:218 install_any.pm:1775
 #: install_any.pm:1827 install_steps.pm:81 install_steps_interactive.pm:37
 #: interactive/http.pm:117 interactive/http.pm:118 modules/interactive.pm:19
 #: network/ndiswrapper.pm:27 network/ndiswrapper.pm:42
@@ -224,11 +224,11 @@ msgstr "請稍候，正在偵測與設定裝置中..."
 #: standalone/drakTermServ:1651 standalone/drakTermServ:1656
 #: standalone/drakTermServ:1664 standalone/drakTermServ:1680
 #: standalone/drakTermServ:1700 standalone/drakauth:36
-#: standalone/drakbackup:510 standalone/drakbackup:624
-#: standalone/drakbackup:1104 standalone/drakbackup:1135
-#: standalone/drakbackup:1320 standalone/drakbackup:1652
-#: standalone/drakbackup:1808 standalone/drakbackup:2536
-#: standalone/drakbackup:4446 standalone/drakclock:124
+#: standalone/drakbackup:511 standalone/drakbackup:625
+#: standalone/drakbackup:1110 standalone/drakbackup:1141
+#: standalone/drakbackup:1332 standalone/drakbackup:1664
+#: standalone/drakbackup:1820 standalone/drakbackup:2548
+#: standalone/drakbackup:4463 standalone/drakclock:124
 #: standalone/drakconnect:676 standalone/drakconnect:680
 #: standalone/drakconnect:685 standalone/drakconnect:700
 #: standalone/drakfont:209 standalone/drakfont:222 standalone/drakfont:260
@@ -247,7 +247,7 @@ msgstr "請稍候，正在偵測與設定裝置中..."
 #: standalone/draksambashare:1190 standalone/draksambashare:1210
 #: standalone/draksambashare:1218 standalone/draksambashare:1230
 #: standalone/draksplash:162 standalone/drakxtv:107
-#: standalone/finish-install:70 standalone/logdrake:171
+#: standalone/finish-install:79 standalone/logdrake:171
 #: standalone/logdrake:439 standalone/logdrake:444 standalone/scannerdrake:59
 #: standalone/scannerdrake:202 standalone/scannerdrake:261
 #: standalone/scannerdrake:732 standalone/scannerdrake:743
@@ -483,12 +483,12 @@ msgstr ""
 "您的顯示卡搭配 Xorg %s 能夠啟用 3D 硬體加速功能，\n"
 "但是請注意，這是實驗性質的支援項目，而且可能會使您的電腦停止回應。"
 
-#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:1009
+#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:1021
 #, c-format
 msgid "Custom"
 msgstr "自訂"
 
-#: Xconfig/main.pm:127 any.pm:730 diskdrake/dav.pm:26 help.pm:14
+#: Xconfig/main.pm:127 any.pm:742 diskdrake/dav.pm:26 help.pm:15
 #: install_steps_interactive.pm:1303 printer/printerdrake.pm:882
 #: printer/printerdrake.pm:899 printer/printerdrake.pm:4546
 #: printer/printerdrake.pm:5010 standalone/drakhosts:263
@@ -521,7 +521,7 @@ msgstr "測試"
 #: Xconfig/main.pm:143 diskdrake/dav.pm:65 diskdrake/interactive.pm:449
 #: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
 #: printer/printerdrake.pm:1112 standalone/drakfont:493
-#: standalone/drakfont:555
+#: standalone/drakfont:548
 #, c-format
 msgid "Options"
 msgstr "選項"
@@ -634,7 +634,7 @@ msgstr "解析度"
 
 #: Xconfig/resolution_and_depth.pm:311 diskdrake/hd_gtk.pm:336
 #: install_steps_gtk.pm:288 mouse.pm:168 services.pm:162
-#: standalone/drakbackup:1594 standalone/drakperm:250
+#: standalone/drakbackup:1606 standalone/drakperm:250
 #, c-format
 msgid "Other"
 msgstr "其他"
@@ -653,28 +653,28 @@ msgstr "顯示卡：%s"
 #: interactive/http.pm:103 interactive/http.pm:156 interactive/newt.pm:321
 #: interactive/stdio.pm:39 interactive/stdio.pm:142 interactive/stdio.pm:143
 #: standalone/drakTermServ:222 standalone/drakTermServ:543
-#: standalone/drakbackup:1360 standalone/drakbackup:4106
-#: standalone/drakbackup:4166 standalone/drakbackup:4210
-#: standalone/drakbackup:4464 standalone/drakconnect:158
+#: standalone/drakbackup:1372 standalone/drakbackup:4123
+#: standalone/drakbackup:4183 standalone/drakbackup:4227
+#: standalone/drakbackup:4481 standalone/drakconnect:158
 #: standalone/drakconnect:852 standalone/drakconnect:939
-#: standalone/drakconnect:1030 standalone/drakfont:576 standalone/drakfont:586
+#: standalone/drakconnect:1030 standalone/drakfont:569 standalone/drakfont:579
 #: standalone/draksplash:173 standalone/drakups:210 standalone/net_monitor:339
 #: ugtk2.pm:392 ugtk2.pm:490 ugtk2.pm:899 ugtk2.pm:922
 #, c-format
 msgid "Ok"
 msgstr "確定"
 
-#: Xconfig/resolution_and_depth.pm:375 diskdrake/smbnfs_gtk.pm:80 help.pm:89
-#: help.pm:444 install_steps_gtk.pm:455 install_steps_interactive.pm:406
+#: Xconfig/resolution_and_depth.pm:375 diskdrake/smbnfs_gtk.pm:80 help.pm:90
+#: help.pm:445 install_steps_gtk.pm:455 install_steps_interactive.pm:406
 #: install_steps_interactive.pm:811 interactive.pm:120 interactive.pm:437
 #: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
 #: interactive/stdio.pm:39 interactive/stdio.pm:142
 #: printer/printerdrake.pm:3882 standalone/drakautoinst:215
-#: standalone/drakbackup:1360 standalone/drakbackup:4035
-#: standalone/drakbackup:4039 standalone/drakbackup:4094
-#: standalone/drakbackup:4464 standalone/drakconnect:157
+#: standalone/drakbackup:1372 standalone/drakbackup:4052
+#: standalone/drakbackup:4056 standalone/drakbackup:4111
+#: standalone/drakbackup:4481 standalone/drakconnect:157
 #: standalone/drakconnect:937 standalone/drakconnect:1029
-#: standalone/drakfont:586 standalone/drakfont:662 standalone/drakfont:739
+#: standalone/drakfont:579 standalone/drakfont:655 standalone/drakfont:733
 #: standalone/draksplash:173 standalone/drakups:217 standalone/logdrake:176
 #: standalone/net_monitor:338 ugtk2.pm:386 ugtk2.pm:488 ugtk2.pm:497
 #: ugtk2.pm:899
@@ -685,7 +685,7 @@ msgstr "取消"
 #: Xconfig/resolution_and_depth.pm:375 diskdrake/hd_gtk.pm:150
 #: install_steps_gtk.pm:232 install_steps_gtk.pm:617 interactive.pm:567
 #: interactive/gtk.pm:682 interactive/gtk.pm:684 standalone/drakTermServ:311
-#: standalone/drakbackup:4031 standalone/drakbug:105
+#: standalone/drakbackup:4048 standalone/drakbug:105
 #: standalone/drakconnect:153 standalone/drakconnect:236
 #: standalone/drakfont:511 standalone/draknfs:206 standalone/drakperm:133
 #: standalone/draksambashare:320 standalone/draksec:344 standalone/draksec:346
@@ -832,20 +832,20 @@ msgid ""
 "other"
 msgstr "其他"
 
-#: any.pm:142 harddrake/sound.pm:192 interactive.pm:474 pkgs.pm:474
+#: any.pm:153 harddrake/sound.pm:195 interactive.pm:474 pkgs.pm:474
 #: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68
-#: standalone/drakups:99 standalone/drakxtv:92 standalone/harddrake2:376
-#: standalone/service_harddrake:209
+#: standalone/drakups:99 standalone/drakxtv:92 standalone/harddrake2:375
+#: standalone/service_harddrake:235
 #, c-format
 msgid "Please wait"
 msgstr "請稍候"
 
-#: any.pm:142
+#: any.pm:153
 #, c-format
 msgid "Bootloader installation in progress"
 msgstr "開機載入程式安裝中"
 
-#: any.pm:153
+#: any.pm:164
 #, c-format
 msgid ""
 "LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
@@ -861,12 +861,12 @@ msgstr ""
 "\n"
 "要分配一個新的磁區標籤？"
 
-#: any.pm:164
+#: any.pm:175
 #, c-format
 msgid "Installation of bootloader failed. The following error occurred:"
 msgstr "開機程式安裝失敗，發生如下之錯誤："
 
-#: any.pm:170
+#: any.pm:181
 #, c-format
 msgid ""
 "You may need to change your Open Firmware boot-device to\n"
@@ -883,7 +883,7 @@ msgstr ""
 "然後再輸入：shut-down\n"
 "然後您下一次開機時應該就可以看到開機啟動程式的訊息了。"
 
-#: any.pm:208
+#: any.pm:219
 #, c-format
 msgid ""
 "You decided to install the bootloader on a partition.\n"
@@ -898,257 +898,257 @@ msgstr ""
 "\n"
 "您目前是用那顆硬碟開機呢？"
 
-#: any.pm:231 help.pm:739
+#: any.pm:242 help.pm:740
 #, c-format
 msgid "First sector of drive (MBR)"
 msgstr "硬碟的第一個扇區 (MBR)"
 
-#: any.pm:232
+#: any.pm:243
 #, c-format
 msgid "First sector of the root partition"
 msgstr "根分割區的第一扇區"
 
-#: any.pm:234
+#: any.pm:245
 #, c-format
 msgid "On Floppy"
 msgstr "在軟碟機"
 
-#: any.pm:236 help.pm:739 printer/printerdrake.pm:4203
+#: any.pm:247 help.pm:740 printer/printerdrake.pm:4203
 #, c-format
 msgid "Skip"
 msgstr "略過"
 
-#: any.pm:240
+#: any.pm:251
 #, c-format
 msgid "LILO/grub Installation"
 msgstr "LILO/GRUB 安裝"
 
-#: any.pm:241
+#: any.pm:252
 #, c-format
 msgid "Where do you want to install the bootloader?"
 msgstr "您要將開機載入程式安裝在那裡？"
 
-#: any.pm:267 standalone/drakboot:269
+#: any.pm:278 standalone/drakboot:269
 #, c-format
 msgid "Boot Style Configuration"
 msgstr "開機樣式組態設定"
 
-#: any.pm:269 any.pm:270 any.pm:303 any.pm:304
+#: any.pm:280 any.pm:281 any.pm:314 any.pm:315
 #, c-format
 msgid "Bootloader main options"
 msgstr "開機載入程式主要選項"
 
-#: any.pm:275
+#: any.pm:286
 #, c-format
 msgid "Give the ram size in MB"
 msgstr "輸入記憶體大小 (以 MB 為單位)"
 
-#: any.pm:277
+#: any.pm:288
 #, c-format
 msgid ""
 "Option ``Restrict command line options'' is of no use without a password"
 msgstr "選項 ``限制命令列選項'' 在沒有設定密碼的情況下會無法使用"
 
-#: any.pm:278 any.pm:615 authentication.pm:192
+#: any.pm:289 any.pm:628 authentication.pm:192
 #, c-format
 msgid "The passwords do not match"
 msgstr "密碼不符合"
 
-#: any.pm:278 any.pm:615 authentication.pm:192 diskdrake/interactive.pm:1336
+#: any.pm:289 any.pm:628 authentication.pm:192 diskdrake/interactive.pm:1336
 #, c-format
 msgid "Please try again"
 msgstr "請再試一次"
 
-#: any.pm:283 any.pm:308
+#: any.pm:294 any.pm:319
 #, c-format
 msgid "Bootloader to use"
 msgstr "要用的開機載入程式"
 
-#: any.pm:285 any.pm:310
+#: any.pm:296 any.pm:321
 #, c-format
 msgid "Boot device"
 msgstr "開機裝置"
 
-#: any.pm:287
+#: any.pm:298
 #, c-format
 msgid "Delay before booting default image"
 msgstr "以預設的核心影像開機之前等待的時間"
 
-#: any.pm:288
+#: any.pm:299
 #, c-format
 msgid "Enable ACPI"
 msgstr "啟用 ACPI"
 
-#: any.pm:290
+#: any.pm:301
 #, c-format
 msgid "Force no APIC"
 msgstr "強制無 APIC"
 
-#: any.pm:292
+#: any.pm:303
 #, c-format
 msgid "Force No Local APIC"
 msgstr "強制無本地端 APIC"
 
-#: any.pm:294 any.pm:650 authentication.pm:197 diskdrake/smbnfs_gtk.pm:180
+#: any.pm:305 any.pm:662 authentication.pm:197 diskdrake/smbnfs_gtk.pm:180
 #: network/netconnect.pm:584 printer/printerdrake.pm:1867
-#: printer/printerdrake.pm:1988 standalone/drakbackup:1638
-#: standalone/drakbackup:3626 standalone/drakups:297
+#: printer/printerdrake.pm:1988 standalone/drakbackup:1650
+#: standalone/drakbackup:3641 standalone/drakups:297
 #, c-format
 msgid "Password"
 msgstr "密碼"
 
-#: any.pm:295 any.pm:651 authentication.pm:198
+#: any.pm:306 any.pm:663 authentication.pm:198
 #, c-format
 msgid "Password (again)"
 msgstr "密碼 (再一次)"
 
-#: any.pm:296
+#: any.pm:307
 #, c-format
 msgid "Restrict command line options"
 msgstr "限制命令列選項"
 
-#: any.pm:296
+#: any.pm:307
 #, c-format
 msgid "restrict"
 msgstr "限制"
 
-#: any.pm:298
+#: any.pm:309
 #, c-format
 msgid "Clean /tmp at each boot"
 msgstr "每次開機時清理 /tmp"
 
-#: any.pm:299
+#: any.pm:310
 #, c-format
 msgid "Precise RAM size if needed (found %d MB)"
 msgstr "若有需要的話，請輸入正確的記憶體大小 (找到 %d MB)"
 
-#: any.pm:309
+#: any.pm:320
 #, c-format
 msgid "Init Message"
 msgstr "啟動訊息"
 
-#: any.pm:311
+#: any.pm:322
 #, c-format
 msgid "Open Firmware Delay"
 msgstr "Open Firmware 延遲"
 
-#: any.pm:312
+#: any.pm:323
 #, c-format
 msgid "Kernel Boot Timeout"
 msgstr "核心啟動時間逾時"
 
-#: any.pm:313
+#: any.pm:324
 #, c-format
 msgid "Enable CD Boot?"
 msgstr "允許光碟開機？"
 
-#: any.pm:314
+#: any.pm:325
 #, c-format
 msgid "Enable OF Boot?"
 msgstr "允許 Open Firmware 開機？"
 
-#: any.pm:315
+#: any.pm:326
 #, c-format
 msgid "Default OS?"
 msgstr "預設的作業系統？"
 
-#: any.pm:369
+#: any.pm:380
 #, c-format
 msgid "Image"
 msgstr "核心影像"
 
-#: any.pm:370 any.pm:380
+#: any.pm:381 any.pm:391
 #, c-format
 msgid "Root"
 msgstr "根目錄"
 
-#: any.pm:371 any.pm:393
+#: any.pm:382 any.pm:404
 #, c-format
 msgid "Append"
 msgstr "附加參數"
 
-#: any.pm:373 standalone/drakboot:271 standalone/drakboot:275
+#: any.pm:384 standalone/drakboot:271 standalone/drakboot:275
 #, c-format
 msgid "Video mode"
 msgstr "顯示模式"
 
-#: any.pm:375
+#: any.pm:386
 #, c-format
 msgid "Initrd"
 msgstr "Initrd"
 
-#: any.pm:376
+#: any.pm:387
 #, c-format
 msgid "Network profile"
 msgstr "網路 profile"
 
-#: any.pm:385 any.pm:390 any.pm:392 diskdrake/interactive.pm:450
+#: any.pm:396 any.pm:401 any.pm:403 diskdrake/interactive.pm:450
 #, c-format
 msgid "Label"
 msgstr "標籤"
 
-#: any.pm:387 any.pm:397 harddrake/v4l.pm:368 standalone/drakbackup:2092
+#: any.pm:398 any.pm:408 harddrake/v4l.pm:438 standalone/drakbackup:2104
 #: standalone/draksec:52
 #, c-format
 msgid "Default"
 msgstr "預設"
 
-#: any.pm:394
+#: any.pm:405
 #, c-format
 msgid "Initrd-size"
 msgstr "Initrd-大小"
 
-#: any.pm:396
+#: any.pm:407
 #, c-format
 msgid "NoVideo"
 msgstr "沒有 Video 參數"
 
-#: any.pm:407
+#: any.pm:418
 #, c-format
 msgid "Empty label not allowed"
 msgstr "不允許空白標籤"
 
-#: any.pm:408
+#: any.pm:419
 #, c-format
 msgid "You must specify a kernel image"
 msgstr "您需要指定一個核心影像"
 
-#: any.pm:408
+#: any.pm:419
 #, c-format
 msgid "You must specify a root partition"
 msgstr "您需要指定一個 root 分割區"
 
-#: any.pm:409
+#: any.pm:420
 #, c-format
 msgid "This label is already used"
 msgstr "這個標籤已經被用過了"
 
-#: any.pm:423
+#: any.pm:434
 #, c-format
 msgid "Which type of entry do you want to add?"
 msgstr "您要新增哪一類的項目？"
 
-#: any.pm:424
+#: any.pm:435
 #, c-format
 msgid "Linux"
 msgstr "Linux"
 
-#: any.pm:424
+#: any.pm:435
 #, c-format
 msgid "Other OS (SunOS...)"
 msgstr "其他作業系統 (SunOS...)"
 
-#: any.pm:425
+#: any.pm:436
 #, c-format
 msgid "Other OS (MacOS...)"
 msgstr "其他作業系統 (MacOS...)"
 
-#: any.pm:425
+#: any.pm:436
 #, c-format
 msgid "Other OS (Windows...)"
 msgstr "其他作業系統 (Windows...)"
 
-#: any.pm:453
+#: any.pm:464
 #, c-format
 msgid ""
 "Here are the entries on your boot menu so far.\n"
@@ -1157,93 +1157,93 @@ msgstr ""
 "目前有這些選項在您的開機選單中。\n"
 "您可以建立更多的選項或修改既有的選項。"
 
-#: any.pm:601
+#: any.pm:614
 #, c-format
 msgid "access to X programs"
 msgstr "存取 X 程式"
 
-#: any.pm:602
+#: any.pm:615
 #, c-format
 msgid "access to rpm tools"
 msgstr "存取 RPM 套件工具程式"
 
-#: any.pm:603
+#: any.pm:616
 #, c-format
 msgid "allow \"su\""
 msgstr "允許 \"su\""
 
-#: any.pm:604
+#: any.pm:617
 #, c-format
 msgid "access to administrative files"
 msgstr "存取系統管理者權限的檔案"
 
-#: any.pm:605
+#: any.pm:618
 #, c-format
 msgid "access to network tools"
 msgstr "存取網路工具"
 
-#: any.pm:606
+#: any.pm:619
 #, c-format
 msgid "access to compilation tools"
 msgstr "存取編譯工具"
 
-#: any.pm:611
+#: any.pm:624
 #, c-format
 msgid "(already added %s)"
 msgstr "( %s 已經加入)"
 
-#: any.pm:616
+#: any.pm:629
 #, c-format
 msgid "This password is too simple"
 msgstr "這密碼太簡單了"
 
-#: any.pm:617
+#: any.pm:630
 #, c-format
 msgid "Please give a user name"
 msgstr "請輸入使用者名稱"
 
-#: any.pm:618
+#: any.pm:631
 #, c-format
 msgid ""
 "The user name must contain only lower cased letters, numbers, `-' and `_'"
 msgstr "使用者名稱只能含有小寫英文字母、數字、`-' 與 `_'"
 
-#: any.pm:619
+#: any.pm:632
 #, c-format
 msgid "The user name is too long"
 msgstr "這個使用者名稱太長了"
 
-#: any.pm:620
+#: any.pm:633
 #, c-format
 msgid "This user name has already been added"
 msgstr "這個使用者已經加入過了"
 
-#: any.pm:621 any.pm:653
+#: any.pm:634 any.pm:665
 #, c-format
 msgid "User ID"
 msgstr "使用者 ID"
 
-#: any.pm:622 any.pm:654
+#: any.pm:635 any.pm:666
 #, c-format
 msgid "Group ID"
 msgstr "群組 ID"
 
-#: any.pm:625
+#: any.pm:638
 #, c-format
 msgid "%s must be a number"
 msgstr "%s 必須是數字"
 
-#: any.pm:626
+#: any.pm:639
 #, c-format
 msgid "%s should be above 500. Accept anyway?"
 msgstr "%s 必須大於 500。還是要接受嗎？"
 
-#: any.pm:631 standalone/draksambashare:1214
+#: any.pm:644 standalone/draksambashare:1214
 #, c-format
 msgid "Add user"
 msgstr "新增使用者"
 
-#: any.pm:633
+#: any.pm:646
 #, c-format
 msgid ""
 "Enter a user\n"
@@ -1252,98 +1252,98 @@ msgstr ""
 "輸入一位使用者\n"
 "%s"
 
-#: any.pm:636 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154
-#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530
+#: any.pm:649 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154
+#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:531
 #: interactive/http.pm:151 printer/printerdrake.pm:197
 #: printer/printerdrake.pm:382 printer/printerdrake.pm:5010
-#: standalone/drakbackup:2824 standalone/scannerdrake:685
+#: standalone/drakbackup:2836 standalone/scannerdrake:685
 #: standalone/scannerdrake:835
 #, c-format
 msgid "Done"
 msgstr "完成"
 
-#: any.pm:637 help.pm:51
+#: any.pm:650 help.pm:52
 #, c-format
 msgid "Accept user"
 msgstr "接受使用者"
 
-#: any.pm:648
+#: any.pm:660
 #, c-format
 msgid "Real name"
 msgstr "真實名稱"
 
-#: any.pm:649 standalone/drakbackup:1633
+#: any.pm:661 standalone/drakbackup:1645
 #, c-format
 msgid "Login name"
 msgstr "登入名稱"
 
-#: any.pm:652
+#: any.pm:664
 #, c-format
 msgid "Shell"
 msgstr "Shell"
 
-#: any.pm:656
+#: any.pm:668
 #, c-format
 msgid "Icon"
 msgstr "圖示"
 
-#: any.pm:703 security/l10n.pm:14
+#: any.pm:715 security/l10n.pm:14
 #, c-format
 msgid "Autologin"
 msgstr "自動登入"
 
-#: any.pm:704
+#: any.pm:716
 #, c-format
 msgid "I can set up your computer to automatically log on one user."
 msgstr "我能夠設定您的電腦自動以某個使用者身份登入系統。"
 
-#: any.pm:705
+#: any.pm:717
 #, c-format
 msgid "Use this feature"
 msgstr "使用此功能"
 
-#: any.pm:706
+#: any.pm:718
 #, c-format
 msgid "Choose the default user:"
 msgstr "選取預設的使用者："
 
-#: any.pm:707
+#: any.pm:719
 #, c-format
 msgid "Choose the window manager to run:"
 msgstr "選取您想使用的視窗管理程式："
 
-#: any.pm:728
+#: any.pm:740
 #, c-format
 msgid "License agreement"
 msgstr "版權協議"
 
-#: any.pm:733
+#: any.pm:745
 #, c-format
 msgid "Release Notes"
 msgstr "發行紀錄"
 
-#: any.pm:736 help.pm:14 install_steps_gtk.pm:539
+#: any.pm:748 help.pm:15 install_steps_gtk.pm:539
 #: install_steps_interactive.pm:715 standalone/drakautoinst:214
 #, c-format
 msgid "Accept"
 msgstr "接受"
 
-#: any.pm:736 install_steps_gtk.pm:539 install_steps_interactive.pm:715
+#: any.pm:748 install_steps_gtk.pm:539 install_steps_interactive.pm:715
 #, c-format
 msgid "Refuse"
 msgstr "拒絕"
 
-#: any.pm:753 any.pm:821
+#: any.pm:765 any.pm:833
 #, c-format
 msgid "Please choose a language to use."
 msgstr "請選擇要使用那個語言。"
 
-#: any.pm:754 any.pm:822
+#: any.pm:766 any.pm:834
 #, c-format
 msgid "Language choice"
 msgstr "語言選擇"
 
-#: any.pm:782
+#: any.pm:794
 #, c-format
 msgid ""
 "Mandriva Linux can support multiple languages. Select\n"
@@ -1353,70 +1353,70 @@ msgstr ""
 "Mandriva Linux 能支援多種語言，請選擇您想安裝的語言。\n"
 "它們將可供您完成安裝並重新啟動系統之後使用。"
 
-#: any.pm:785
+#: any.pm:797
 #, c-format
 msgid "Multi languages"
 msgstr "多語系"
 
-#: any.pm:801 any.pm:830 help.pm:647
+#: any.pm:813 any.pm:842 help.pm:648
 #, c-format
 msgid "Use Unicode by default"
 msgstr "預設使用 Unicode"
 
-#: any.pm:802 help.pm:647
+#: any.pm:814 help.pm:648
 #, c-format
 msgid "All languages"
 msgstr "所有語言"
 
-#: any.pm:876 help.pm:566 help.pm:855 install_steps_interactive.pm:932
+#: any.pm:888 help.pm:567 help.pm:856 install_steps_interactive.pm:932
 #, c-format
 msgid "Country / Region"
 msgstr "國家/地區"
 
-#: any.pm:878
+#: any.pm:890
 #, c-format
 msgid "Please choose your country."
 msgstr "請選擇您的國家。"
 
-#: any.pm:880
+#: any.pm:892
 #, c-format
 msgid "Here is the full list of available countries"
 msgstr "以下是全部可用的所有的國家清單"
 
-#: any.pm:881
+#: any.pm:893
 #, c-format
 msgid "Other Countries"
 msgstr "其他國家"
 
-#: any.pm:881 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
+#: any.pm:893 help.pm:52 help.pm:410 help.pm:432 help.pm:648 help.pm:723
 #: interactive.pm:397
 #, c-format
 msgid "Advanced"
 msgstr "進階"
 
-#: any.pm:889
+#: any.pm:901
 #, c-format
 msgid "Input method:"
 msgstr "輸入法："
 
-#: any.pm:892 install_any.pm:422 network/netconnect.pm:317
+#: any.pm:904 install_any.pm:422 network/netconnect.pm:317
 #: network/netconnect.pm:322 network/netconnect.pm:1237 network/wireless.pm:7
 #: printer/printerdrake.pm:117
 #, c-format
 msgid "None"
 msgstr "無"
 
-#: any.pm:1009
+#: any.pm:1021
 #, c-format
 msgid "No sharing"
 msgstr "不分享"
 
-#: any.pm:1009
+#: any.pm:1021
 #, c-format
 msgid "Allow all users"
 msgstr "允許所有使用者"
 
-#: any.pm:1013
+#: any.pm:1025
 #, c-format
 msgid ""
 "Would you like to allow users to share some of their directories?\n"
@@ -1431,35 +1431,35 @@ msgstr ""
 "\n"
 "\"自訂\" 允許每一個使用者自行設定。\n"
 
-#: any.pm:1025
+#: any.pm:1037
 #, c-format
 msgid ""
 "NFS: the traditional Unix file sharing system, with less support on Mac and "
 "Windows."
 msgstr "NFS：傳統的 Unix 檔案分享系統，但 Mac 與 Windows 的支援較不足。"
 
-#: any.pm:1028
+#: any.pm:1040
 #, c-format
 msgid ""
 "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
 "systems."
 msgstr "SMB：一個 Windows、Mac OS X 與許多先進的 Linux 系統用的檔案分享系統。"
 
-#: any.pm:1036
+#: any.pm:1048
 #, c-format
 msgid ""
 "You can export using NFS or SMB. Please select which you would like to use."
 msgstr "您能夠用 NFS 或者是 SMB 匯出。請選擇您想要用那一個。"
 
-#: any.pm:1061
+#: any.pm:1073
 #, c-format
 msgid "Launch userdrake"
 msgstr "啟動 userdrake"
 
-#: any.pm:1061 printer/printerdrake.pm:4085 printer/printerdrake.pm:4088
+#: any.pm:1073 printer/printerdrake.pm:4085 printer/printerdrake.pm:4088
 #: printer/printerdrake.pm:4089 printer/printerdrake.pm:4090
 #: printer/printerdrake.pm:5328 standalone/drakTermServ:321
-#: standalone/drakbackup:4228 standalone/drakbug:126 standalone/drakfont:499
+#: standalone/drakbackup:4245 standalone/drakbug:126 standalone/drakfont:499
 #: standalone/drakids:64 standalone/drakids:77 standalone/drakids:85
 #: standalone/draknfs:210 standalone/net_monitor:117
 #: standalone/printerdrake:583
@@ -1467,7 +1467,7 @@ msgstr "啟動 userdrake"
 msgid "Close"
 msgstr "關閉"
 
-#: any.pm:1063
+#: any.pm:1075
 #, c-format
 msgid ""
 "The per-user sharing uses the group \"fileshare\". \n"
@@ -1625,7 +1625,7 @@ msgstr "Active Directory 認證"
 msgid "Domain"
 msgstr "網域"
 
-#: authentication.pm:124 diskdrake/dav.pm:63 help.pm:146
+#: authentication.pm:124 diskdrake/dav.pm:63 help.pm:147
 #: printer/printerdrake.pm:75 share/compssUsers.pl:82
 #: standalone/drakTermServ:296
 #, c-format
@@ -1729,7 +1729,7 @@ msgid "Authentication method"
 msgstr "認證方式"
 
 #. -PO: keep this short or else the buttons will not fit in the window
-#: authentication.pm:188 help.pm:722
+#: authentication.pm:188 help.pm:723
 #, c-format
 msgid "No password"
 msgstr "沒有密碼"
@@ -2137,7 +2137,7 @@ msgstr ""
 "如果您打算使用 aboot 程式的話，請注意您至少需要在磁碟最前端保留一塊可用的空"
 "間 (2048 扇區就足夠了)"
 
-#: diskdrake/hd_gtk.pm:152 help.pm:530
+#: diskdrake/hd_gtk.pm:152 help.pm:531
 #, c-format
 msgid "Wizard"
 msgstr "精靈"
@@ -2164,7 +2164,7 @@ msgid "Please click on a partition"
 msgstr "請點選一個分割區"
 
 #: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:457
-#: standalone/drakbackup:3076 standalone/drakbackup:3136
+#: standalone/drakbackup:3088 standalone/drakbackup:3148
 #, c-format
 msgid "Details"
 msgstr "詳細資訊"
@@ -2259,7 +2259,7 @@ msgstr "選擇一個分割區"
 msgid "Exit"
 msgstr "離開"
 
-#: diskdrake/interactive.pm:257 help.pm:530
+#: diskdrake/interactive.pm:257 help.pm:531
 #, c-format
 msgid "Undo"
 msgstr "復原"
@@ -2310,18 +2310,18 @@ msgstr ""
 "否則掛載點 %s 的資訊將不會寫入 fstab 中。\n"
 "仍然要離開嗎？"
 
-#: diskdrake/interactive.pm:311 help.pm:530
+#: diskdrake/interactive.pm:311 help.pm:531
 #, c-format
 msgid "Clear all"
 msgstr "全部清除"
 
-#: diskdrake/interactive.pm:312 help.pm:530
+#: diskdrake/interactive.pm:312 help.pm:531
 #, c-format
 msgid "Auto allocate"
 msgstr "自動分配"
 
-#: diskdrake/interactive.pm:313 help.pm:530 help.pm:566 help.pm:606
-#: help.pm:855 install_steps_interactive.pm:98
+#: diskdrake/interactive.pm:313 help.pm:531 help.pm:567 help.pm:607
+#: help.pm:856 install_steps_interactive.pm:98
 #, c-format
 msgid "More"
 msgstr "更多"
@@ -2363,22 +2363,22 @@ msgstr "Supermount"
 msgid "Supermount except for CDROM drives"
 msgstr "在光碟機以外的裝置使用 supermount"
 
-#: diskdrake/interactive.pm:369 help.pm:530
+#: diskdrake/interactive.pm:369 help.pm:531
 #, c-format
 msgid "Save partition table"
 msgstr "寫入硬碟分割表"
 
-#: diskdrake/interactive.pm:370 help.pm:530
+#: diskdrake/interactive.pm:370 help.pm:531
 #, c-format
 msgid "Restore partition table"
 msgstr "回存硬碟分割表"
 
-#: diskdrake/interactive.pm:371 help.pm:530
+#: diskdrake/interactive.pm:371 help.pm:531
 #, c-format
 msgid "Rescue partition table"
 msgstr "搶救硬碟分割表"
 
-#: diskdrake/interactive.pm:373 help.pm:530
+#: diskdrake/interactive.pm:373 help.pm:531
 #, c-format
 msgid "Reload partition table"
 msgstr "重新載入硬碟分割表"
@@ -2992,7 +2992,7 @@ msgid ""
 "Please enter your username, password and domain name to access this host."
 msgstr "請輸入你的使用者名稱，密碼以及網域名稱，以便於能夠連線存取這個主機。"
 
-#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3625
+#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3640
 #, c-format
 msgid "Username"
 msgstr "使用者名稱"
@@ -3022,7 +3022,7 @@ msgstr "無法安裝 %s 套件！"
 msgid "Mandatory package %s is missing"
 msgstr "遺失了必要的 %s 套件"
 
-#: do_pkgs.pm:35 harddrake/sound.pm:275 install_steps_interactive.pm:1288
+#: do_pkgs.pm:35 harddrake/sound.pm:278 install_steps_interactive.pm:1288
 #: keyboard.pm:381 network/ndiswrapper.pm:95 network/netconnect.pm:471
 #: printer/printerdrake.pm:1416 printer/printerdrake.pm:2495
 #: printer/printerdrake.pm:2632 printer/printerdrake.pm:2953
@@ -3030,17 +3030,17 @@ msgstr "遺失了必要的 %s 套件"
 #: printer/printerdrake.pm:4211 printer/printerdrake.pm:4330
 #: printer/printerdrake.pm:5487 standalone/drakTermServ:354
 #: standalone/drakTermServ:1267 standalone/drakTermServ:1328
-#: standalone/drakTermServ:2006 standalone/drakbackup:509
-#: standalone/drakbackup:608 standalone/drakboot:133 standalone/drakclock:224
-#: standalone/drakconnect:973 standalone/drakperm:380 standalone/drakperm:390
-#: standalone/drakups:27 standalone/harddrake2:511 standalone/harddrake2:527
-#: standalone/localedrake:43 standalone/scannerdrake:51
-#: standalone/scannerdrake:957
+#: standalone/drakTermServ:2006 standalone/drakbackup:510
+#: standalone/drakbackup:609 standalone/drakboot:133 standalone/drakclock:224
+#: standalone/drakconnect:973 standalone/drakfont:679 standalone/drakperm:380
+#: standalone/drakperm:390 standalone/drakups:27 standalone/harddrake2:510
+#: standalone/harddrake2:526 standalone/localedrake:43
+#: standalone/scannerdrake:51 standalone/scannerdrake:957
 #, c-format
 msgid "Warning"
 msgstr "警告"
 
-#: do_pkgs.pm:35 standalone/harddrake2:527
+#: do_pkgs.pm:35 standalone/harddrake2:526
 #, c-format
 msgid "The following packages need to be installed:\n"
 msgstr "需要安裝下列套件：\n"
@@ -3209,7 +3209,7 @@ msgstr "將 /usr 分別掛載"
 msgid "server"
 msgstr "伺服器"
 
-#: fsedit.pm:218
+#: fsedit.pm:219
 #, c-format
 msgid ""
 "I can not read the partition table of device %s, it's too corrupted for me :"
@@ -3227,22 +3227,22 @@ msgstr ""
 "\n"
 "您同意要清除所有的分割區嗎？\n"
 
-#: fsedit.pm:391
+#: fsedit.pm:392
 #, c-format
 msgid "Mount points must begin with a leading /"
 msgstr "掛載點必需以 / 開頭"
 
-#: fsedit.pm:392
+#: fsedit.pm:393
 #, c-format
 msgid "Mount points should contain only alphanumerical characters"
 msgstr "掛載點應該只有包含英文字母與數字與底線這類字元"
 
-#: fsedit.pm:393
+#: fsedit.pm:394
 #, c-format
 msgid "There is already a partition with mount point %s\n"
 msgstr "已經有分割區分配到掛載點 %s 了\n"
 
-#: fsedit.pm:397
+#: fsedit.pm:398
 #, c-format
 msgid ""
 "You've selected a software RAID partition as root (/).\n"
@@ -3253,14 +3253,14 @@ msgstr ""
 "但開機載入程式無法處理這種 /boot 目錄不位於實體分割區的情況。\n"
 "請確定會新增一個掛載於實體分割區的 /boot 目錄"
 
-#: fsedit.pm:403
+#: fsedit.pm:404
 #, fuzzy, c-format
 msgid ""
 "You can not use the LVM Logical Volume for mount point %s since it spans "
 "physical volumes"
 msgstr "您不能使用 LVM Logical Volume 來作為 %s 的掛載點"
 
-#: fsedit.pm:405
+#: fsedit.pm:406
 #, fuzzy, c-format
 msgid ""
 "You've selected the LVM Logical Volume as root (/).\n"
@@ -3272,12 +3272,12 @@ msgstr ""
 "但開機載入程式無法處理這種 /boot 目錄不位於實體分割區的情況。\n"
 "請確定會新增一個掛載於實體分割區的 /boot 目錄"
 
-#: fsedit.pm:409 fsedit.pm:411
+#: fsedit.pm:410 fsedit.pm:412
 #, c-format
 msgid "This directory should remain within the root filesystem"
 msgstr "這個目錄應該放在根檔案系統 (/) 才對"
 
-#: fsedit.pm:413 fsedit.pm:415
+#: fsedit.pm:414 fsedit.pm:416
 #, c-format
 msgid ""
 "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
@@ -3285,17 +3285,17 @@ msgid ""
 msgstr ""
 "您需要一個真正的檔案系統 (ext2/ext3、reiserfs、xfs 或是 jfs) 來放這個掛載點\n"
 
-#: fsedit.pm:417
+#: fsedit.pm:418
 #, c-format
 msgid "You can not use an encrypted file system for mount point %s"
 msgstr "您不能使用加密過的檔案系統來作為 %s 的掛載點"
 
-#: fsedit.pm:481
+#: fsedit.pm:482
 #, c-format
 msgid "Not enough free space for auto-allocating"
 msgstr "沒有足夠的空間來進行自動配置"
 
-#: fsedit.pm:483
+#: fsedit.pm:484
 #, c-format
 msgid "Nothing to do"
 msgstr "沒有做任何動作"
@@ -3330,7 +3330,7 @@ msgstr "CD/DVD 燒錄器"
 msgid "DVD-ROM"
 msgstr "DVD-ROM"
 
-#: harddrake/data.pm:127 standalone/drakbackup:2054
+#: harddrake/data.pm:127 standalone/drakbackup:2066
 #, c-format
 msgid "Tape"
 msgstr "磁帶"
@@ -3425,7 +3425,7 @@ msgstr "記憶體"
 msgid "AGP controllers"
 msgstr "AGP 控制器"
 
-#: harddrake/data.pm:324 help.pm:186 help.pm:855
+#: harddrake/data.pm:324 help.pm:187 help.pm:856
 #: install_steps_interactive.pm:964
 #, c-format
 msgid "Printer"
@@ -3457,90 +3457,90 @@ msgstr "RAID 控制器"
 msgid "(E)IDE/ATA controllers"
 msgstr "(E)IDE/ATA 控制器"
 
-#: harddrake/data.pm:384
+#: harddrake/data.pm:385
 #, c-format
 msgid "Firewire controllers"
 msgstr "Firewire 控制器"
 
-#: harddrake/data.pm:393
+#: harddrake/data.pm:394
 #, c-format
 msgid "PCMCIA controllers"
 msgstr "PCMCIA 控制器"
 
-#: harddrake/data.pm:402
+#: harddrake/data.pm:403
 #, c-format
 msgid "SCSI controllers"
 msgstr "SCSI 控制器"
 
-#: harddrake/data.pm:411
+#: harddrake/data.pm:412
 #, c-format
 msgid "USB controllers"
 msgstr "USB 控制器"
 
-#: harddrake/data.pm:420
+#: harddrake/data.pm:421
 #, c-format
 msgid "USB ports"
 msgstr "USB 埠"
 
-#: harddrake/data.pm:429
+#: harddrake/data.pm:430
 #, c-format
 msgid "SMBus controllers"
 msgstr "SMBus 控制器"
 
-#: harddrake/data.pm:438
+#: harddrake/data.pm:439
 #, c-format
 msgid "Bridges and system controllers"
 msgstr "橋樑與系統控制器"
 
-#: harddrake/data.pm:449 help.pm:855 install_steps_interactive.pm:94
+#: harddrake/data.pm:450 help.pm:856 install_steps_interactive.pm:94
 #: install_steps_interactive.pm:924 standalone/finish-install:41
 #: standalone/keyboarddrake:29
 #, c-format
 msgid "Keyboard"
 msgstr "鍵盤"
 
-#: harddrake/data.pm:462
+#: harddrake/data.pm:463
 #, c-format
 msgid "Tablet and touchscreen"
 msgstr "Tablet 與觸控螢幕"
 
-#: harddrake/data.pm:471 help.pm:855 install_steps_interactive.pm:957
+#: harddrake/data.pm:472 help.pm:856 install_steps_interactive.pm:957
 #, c-format
 msgid "Mouse"
 msgstr "滑鼠"
 
-#: harddrake/data.pm:485
+#: harddrake/data.pm:486
 #, c-format
 msgid "UPS"
 msgstr "UPS 不斷電系統"
 
-#: harddrake/data.pm:494
+#: harddrake/data.pm:495
 #, c-format
 msgid "Scanner"
 msgstr "掃描器"
 
-#: harddrake/data.pm:504 standalone/harddrake2:476
+#: harddrake/data.pm:505 standalone/harddrake2:475
 #, c-format
 msgid "Unknown/Others"
 msgstr "未知/其他"
 
-#: harddrake/data.pm:532
+#: harddrake/data.pm:533
 #, c-format
 msgid "cpu # "
 msgstr "CPU 編號"
 
-#: harddrake/sound.pm:192 standalone/drakconnect:162
+#: harddrake/sound.pm:195 standalone/drakconnect:162
 #: standalone/drakconnect:637
 #, c-format
 msgid "Please Wait... Applying the configuration"
 msgstr "請稍待... 正在套用該設定"
 
-#: harddrake/sound.pm:229
+#: harddrake/sound.pm:232
 #, c-format
 msgid "No alternative driver"
 msgstr "沒有其他可供選擇的驅動程式"
 
-#: harddrake/sound.pm:230
+#: harddrake/sound.pm:233
 #, c-format
 msgid ""
 "There's no known OSS/ALSA alternative driver for your sound card (%s) which "
@@ -3549,12 +3549,12 @@ msgstr ""
 "您的音效卡 (%s) 正在使用 \"%s\" 驅動程式，目前沒有其他可供選擇的 OSS/ALSA 驅"
 "動程式支援它"
 
-#: harddrake/sound.pm:236
+#: harddrake/sound.pm:239
 #, c-format
 msgid "Sound configuration"
 msgstr "音效設定"
 
-#: harddrake/sound.pm:238
+#: harddrake/sound.pm:241
 #, c-format
 msgid ""
 "Here you can select an alternative driver (either OSS or ALSA) for your "
@@ -3564,7 +3564,7 @@ msgstr "您可以選擇使用其他的 (OSS 或者 ALSA) 的驅動程式給您
 #. -PO: here the first %s is either "OSS" or "ALSA", 
 #. -PO: the second %s is the name of the current driver
 #. -PO: and the third %s is the name of the default driver
-#: harddrake/sound.pm:243
+#: harddrake/sound.pm:246
 #, c-format
 msgid ""
 "\n"
@@ -3576,7 +3576,7 @@ msgstr ""
 "\n"
 "您的音效卡現在正在使用 %s\"%s\" 驅動程式 (您的音效卡預設的驅動程式為 \"%s\")"
 
-#: harddrake/sound.pm:245
+#: harddrake/sound.pm:248
 #, c-format
 msgid ""
 "OSS (Open Sound System) was the first sound API. It's an OS independent "
@@ -3608,17 +3608,17 @@ msgstr ""
 "- 相容於 OSS 的舊 API\n"
 "- 提供許多強化的功能但需要使用 ALSA 函式庫的新 ALSA API。\n"
 
-#: harddrake/sound.pm:259 harddrake/sound.pm:347 standalone/drakups:144
+#: harddrake/sound.pm:262 harddrake/sound.pm:350 standalone/drakups:144
 #, c-format
 msgid "Driver:"
 msgstr "驅動程式："
 
-#: harddrake/sound.pm:267
+#: harddrake/sound.pm:270
 #, c-format
 msgid "Trouble shooting"
 msgstr "疑難排解"
 
-#: harddrake/sound.pm:275
+#: harddrake/sound.pm:278
 #, c-format
 msgid ""
 "The old \"%s\" driver is blacklisted.\n"
@@ -3633,45 +3633,45 @@ msgstr ""
 "\n"
 "於下一次開機時將只會使用新的 \"%s\" 驅動程式。"
 
-#: harddrake/sound.pm:283
+#: harddrake/sound.pm:286
 #, c-format
 msgid "No open source driver"
 msgstr "無開放原始碼的驅動程式可用"
 
-#: harddrake/sound.pm:284
+#: harddrake/sound.pm:287
 #, c-format
 msgid ""
 "There's no free driver for your sound card (%s), but there's a proprietary "
 "driver at \"%s\"."
 msgstr "您的音效卡 (%s) 沒有自由的驅動程式，但是有私有的驅動程式於 \"%s\"."
 
-#: harddrake/sound.pm:287
+#: harddrake/sound.pm:290
 #, c-format
 msgid "No known driver"
 msgstr "無已知的驅動程式"
 
-#: harddrake/sound.pm:288
+#: harddrake/sound.pm:291
 #, c-format
 msgid "There's no known driver for your sound card (%s)"
 msgstr "您使用的音效卡尚未有已知的驅動程式 (%s)"
 
-#: harddrake/sound.pm:292 network/netconnect.pm:98 network/netconnect.pm:837
+#: harddrake/sound.pm:295 network/netconnect.pm:98 network/netconnect.pm:837
 #, c-format
 msgid "Unknown driver"
 msgstr "未知的驅動程式"
 
-#: harddrake/sound.pm:293
+#: harddrake/sound.pm:296
 #, c-format
 msgid "Error: The \"%s\" driver for your sound card is unlisted"
 msgstr "錯誤：您的音效卡驅動程式 \"%s\" 不在列表中"
 
-#: harddrake/sound.pm:307
+#: harddrake/sound.pm:310
 #, c-format
 msgid "Sound trouble shooting"
 msgstr "音效問題排除"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:310
+#: harddrake/sound.pm:313
 #, c-format
 msgid ""
 "The classic bug sound tester is to run the following commands:\n"
@@ -3710,18 +3710,18 @@ msgstr ""
 "\n"
 "- \"/sbin/fuser -v /dev/dsp\" 將指出哪個程式在使用音效卡。\n"
 
-#: harddrake/sound.pm:336
+#: harddrake/sound.pm:339
 #, c-format
 msgid "Let me pick any driver"
 msgstr "讓我選擇任何驅動程式"
 
-#: harddrake/sound.pm:339
+#: harddrake/sound.pm:342
 #, c-format
 msgid "Choosing an arbitrary driver"
 msgstr "正在選擇任意的驅動程式"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:342
+#: harddrake/sound.pm:345
 #, c-format
 msgid ""
 "If you really think that you know which driver is the right one for your "
@@ -3741,22 +3741,22 @@ msgstr ""
 msgid "Auto-detect"
 msgstr "自動偵測"
 
-#: harddrake/v4l.pm:85 harddrake/v4l.pm:263 harddrake/v4l.pm:296
+#: harddrake/v4l.pm:97 harddrake/v4l.pm:285 harddrake/v4l.pm:337
 #, c-format
 msgid "Unknown|Generic"
 msgstr "未知|一般"
 
-#: harddrake/v4l.pm:118
+#: harddrake/v4l.pm:130
 #, c-format
 msgid "Unknown|CPH05X (bt878) [many vendors]"
 msgstr "未知|CPH05X (bt878) [許多廠商]"
 
-#: harddrake/v4l.pm:119
+#: harddrake/v4l.pm:131
 #, c-format
 msgid "Unknown|CPH06X (bt878) [many vendors]"
 msgstr "未知|CPH06X (bt878) [許多廠商]"
 
-#: harddrake/v4l.pm:404
+#: harddrake/v4l.pm:474
 #, c-format
 msgid ""
 "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
@@ -3769,42 +3769,42 @@ msgstr ""
 "若是無法正確偵測您的電視卡的話，您可以在這邊直接指定正確的電視頻道與電視卡型"
 "號。若需要的話請直接選擇您的電視卡卡參數。"
 
-#: harddrake/v4l.pm:407
+#: harddrake/v4l.pm:477
 #, c-format
 msgid "Card model:"
 msgstr "介面卡型號："
 
-#: harddrake/v4l.pm:408
+#: harddrake/v4l.pm:478
 #, c-format
 msgid "Tuner type:"
 msgstr "調頻類型："
 
-#: harddrake/v4l.pm:409
+#: harddrake/v4l.pm:479
 #, c-format
 msgid "Number of capture buffers:"
 msgstr "擷取緩衝的數量："
 
-#: harddrake/v4l.pm:409
+#: harddrake/v4l.pm:479
 #, c-format
 msgid "number of capture buffers for mmap'ed capture"
 msgstr ""
 
-#: harddrake/v4l.pm:411
+#: harddrake/v4l.pm:481
 #, c-format
 msgid "PLL setting:"
 msgstr "PLL 設定："
 
-#: harddrake/v4l.pm:412
+#: harddrake/v4l.pm:482
 #, c-format
 msgid "Radio support:"
 msgstr "音效支援："
 
-#: harddrake/v4l.pm:412
+#: harddrake/v4l.pm:482
 #, c-format
 msgid "enable radio support"
 msgstr "啟用音效支援"
 
-#: help.pm:11
+#: help.pm:12
 #, c-format
 msgid ""
 "Before continuing, you should carefully read the terms of the license. It\n"
@@ -3816,7 +3816,7 @@ msgstr ""
 "這包含整個 Mandriva Linux 發行版的版權內容。若是您同意裡面的所有條款，\n"
 "請點選 \"%s\" 按鈕，否則請點選 \"%s\" 按鈕並自動重新開機。"
 
-#: help.pm:17
+#: help.pm:18
 #, c-format
 msgid ""
 "GNU/Linux is a multi-user system which means each user can have his or her\n"
@@ -3884,29 +3884,29 @@ msgstr ""
 "選擇想要登入的使用者與視窗管理員，然後勾選 \"%s\"。若您對這個功\n"
 "能沒有興趣，請不要勾選 \"%s\"。"
 
-#: help.pm:51 printer/printerdrake.pm:1866 printer/printerdrake.pm:1987
+#: help.pm:52 printer/printerdrake.pm:1866 printer/printerdrake.pm:1987
 #: standalone/draksambashare:60
 #, c-format
 msgid "User name"
 msgstr "使用者名稱"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: help.pm:51 help.pm:431 help.pm:681 install_interactive.pm:176
+#: help.pm:52 help.pm:432 help.pm:682 install_interactive.pm:176
 #: install_steps_gtk.pm:237 install_steps_gtk.pm:682 interactive.pm:436
 #: interactive/newt.pm:321 network/thirdparty.pm:385
 #: printer/printerdrake.pm:3884 standalone/drakTermServ:412
-#: standalone/drakbackup:4085 standalone/drakbackup:4179
-#: standalone/drakbackup:4196 standalone/drakbackup:4214 ugtk2.pm:490
+#: standalone/drakbackup:4102 standalone/drakbackup:4196
+#: standalone/drakbackup:4213 standalone/drakbackup:4231 ugtk2.pm:490
 #, c-format
 msgid "Next"
 msgstr "下一步"
 
-#: help.pm:51
+#: help.pm:52
 #, c-format
 msgid "Do you want to use this feature?"
 msgstr "您想要使用這個功能嗎？"
 
-#: help.pm:54
+#: help.pm:55
 #, c-format
 msgid ""
 "Listed here are the existing Linux partitions detected on your hard drive.\n"
@@ -3965,7 +3965,7 @@ msgstr ""
 "以 SCSI 硬碟來說, \"a\" 就是指 \"SCSI ID 編號最小的那一台\", \"b\"\n"
 "就是指 \"SCSI ID 編號為第二小的那一台硬碟\", 然後依此類推下去."
 
-#: help.pm:85
+#: help.pm:86
 #, c-format
 msgid ""
 "The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
@@ -3978,7 +3978,7 @@ msgstr ""
 "DrakeX 會退出現在的光碟且要求您放入所要求的正確光碟片。\n"
 "若您沒有要求的光碟在手上的話, 就按下 \"%s\", 對應的套件不會被安裝."
 
-#: help.pm:92
+#: help.pm:93
 #, c-format
 msgid ""
 "It's now time to specify which programs you wish to install on your system.\n"
@@ -4080,48 +4080,48 @@ msgstr ""
 " * \"%s\"：將安裝絕對最少套件必要於使一個 Linux 系統工作。\n"
 "用這個安裝您將只擁有一個命令列介面. 全部安裝大小大約 65 MB。"
 
-#: help.pm:146 share/compssUsers.pl:24
+#: help.pm:147 share/compssUsers.pl:24
 #, c-format
 msgid "Workstation"
 msgstr "工作站"
 
-#: help.pm:146 share/compssUsers.pl:65 share/compssUsers.pl:167
+#: help.pm:147 share/compssUsers.pl:65 share/compssUsers.pl:167
 #: share/compssUsers.pl:169
 #, c-format
 msgid "Development"
 msgstr "程式開發"
 
-#: help.pm:146 share/compssUsers.pl:145
+#: help.pm:147 share/compssUsers.pl:145
 #, c-format
 msgid "Graphical Environment"
 msgstr "圖形環境"
 
-#: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:623
+#: help.pm:147 install_steps_gtk.pm:235 install_steps_interactive.pm:623
 #, c-format
 msgid "Individual package selection"
 msgstr "選取單一套件"
 
-#: help.pm:146 help.pm:588
+#: help.pm:147 help.pm:589
 #, c-format
 msgid "Upgrade"
 msgstr "升級"
 
-#: help.pm:146 install_steps_interactive.pm:581
+#: help.pm:147 install_steps_interactive.pm:581
 #, c-format
 msgid "With X"
 msgstr "包含 X 環境"
 
-#: help.pm:146
+#: help.pm:147
 #, c-format
 msgid "With basic documentation"
 msgstr "包含基本的說明文件"
 
-#: help.pm:146
+#: help.pm:147
 #, c-format
 msgid "Truly minimal install"
 msgstr "真的最小安裝"
 
-#: help.pm:149
+#: help.pm:150
 #, c-format
 msgid ""
 "If you choose to install packages individually, the installer will present\n"
@@ -4159,27 +4159,29 @@ msgid ""
 "such a floppy."
 msgstr ""
 
-#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:944
-#: interactive.pm:161 modules/interactive.pm:71 standalone/drakbackup:2624
-#: standalone/draksec:54 standalone/harddrake2:332 ugtk2.pm:898 wizards.pm:156
+#: help.pm:181 help.pm:286 help.pm:314 help.pm:445 install_any.pm:944
+#: interactive.pm:161 modules/interactive.pm:71 standalone/drakbackup:2636
+#: standalone/drakfont:687 standalone/draksec:54 standalone/harddrake2:331
+#: ugtk2.pm:898 wizards.pm:156
 #, c-format
 msgid "No"
 msgstr "否"
 
-#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:944 interactive.pm:161
+#: help.pm:181 help.pm:286 help.pm:445 install_any.pm:944 interactive.pm:161
 #: modules/interactive.pm:71 printer/printerdrake.pm:883
-#: printer/printerdrake.pm:898 standalone/drakbackup:2624
-#: standalone/draksec:55 standalone/harddrake2:331 ugtk2.pm:898 wizards.pm:156
+#: printer/printerdrake.pm:898 standalone/drakbackup:2636
+#: standalone/drakfont:685 standalone/draksec:55 standalone/harddrake2:330
+#: ugtk2.pm:898 wizards.pm:156
 #, c-format
 msgid "Yes"
 msgstr "是的"
 
-#: help.pm:180
+#: help.pm:181
 #, c-format
 msgid "Automatic dependencies"
 msgstr "自動相依性"
 
-#: help.pm:183
+#: help.pm:184
 #, c-format
 msgid ""
 "\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
@@ -4188,15 +4190,15 @@ msgid ""
 "manual is similar to the one used during installation."
 msgstr ""
 
-#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:595
-#: standalone/drakbackup:2448 standalone/drakbackup:2452
-#: standalone/drakbackup:2456 standalone/drakbackup:2460
+#: help.pm:187 help.pm:567 help.pm:856 install_steps_gtk.pm:595
+#: standalone/drakbackup:2460 standalone/drakbackup:2464
+#: standalone/drakbackup:2468 standalone/drakbackup:2472
 #: standalone/drakroam:227
 #, c-format
 msgid "Configure"
 msgstr "設定"
 
-#: help.pm:189
+#: help.pm:190
 #, c-format
 msgid ""
 "This dialog is used to select which services you wish to start at boot\n"
@@ -4228,7 +4230,7 @@ msgstr ""
 "開啟那些您不用的服務. 請記得某些服務在伺服器上啟動後可能會有危險.\n"
 "大致上只選那些你真正需要的服務. !!"
 
-#: help.pm:206
+#: help.pm:207
 #, c-format
 msgid ""
 "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
@@ -4245,17 +4247,17 @@ msgid ""
 "server which can be used by other machines on your local network as well."
 msgstr ""
 
-#: help.pm:217 install_steps_interactive.pm:859
+#: help.pm:218 install_steps_interactive.pm:859
 #, c-format
 msgid "Hardware clock set to GMT"
 msgstr "硬體時鐘設定為 GMT 時間"
 
-#: help.pm:217
+#: help.pm:218
 #, c-format
 msgid "Automatic time synchronization"
 msgstr "自動時間同步"
 
-#: help.pm:220
+#: help.pm:221
 #, c-format
 msgid ""
 "Graphic Card\n"
@@ -4276,7 +4278,7 @@ msgstr ""
 "   如果有不同的伺服器可以與您的顯示卡搭配使用 (有或沒有 3D\n"
 "加速功能)，請您選擇一個最符合您需求的伺服器來使用。"
 
-#: help.pm:231
+#: help.pm:232
 #, c-format
 msgid ""
 "X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
@@ -4336,7 +4338,7 @@ msgid ""
 "not successful in getting the display configured."
 msgstr ""
 
-#: help.pm:288
+#: help.pm:289
 #, c-format
 msgid ""
 "Monitor\n"
@@ -4350,7 +4352,7 @@ msgstr ""
 "    一般來說，安裝程式會自動偵測並設定連接到您電腦的螢幕。如果它不正確\n"
 "，您可以由此列表中選取連結到您電腦的螢幕。"
 
-#: help.pm:295
+#: help.pm:296
 #, c-format
 msgid ""
 "Resolution\n"
@@ -4365,7 +4367,7 @@ msgstr ""
 "    在這裡您可以選擇您顯示卡可以使用的解析度與色深。請選取最適合您的設定值\n"
 "(您可以在安裝完成之後更改)。您選取的設定值的樣本將顯示在螢幕圖片上。"
 
-#: help.pm:303
+#: help.pm:304
 #, c-format
 msgid ""
 "In the situation where different servers are available for your card, with\n"
@@ -4375,7 +4377,7 @@ msgstr ""
 "如果有不同的伺服器可以與您的顯示卡搭配使用 (有或沒有 3D加速\n"
 "功能)，請您選擇一個最符合您需求的伺服器來使用。"
 
-#: help.pm:308
+#: help.pm:309
 #, c-format
 msgid ""
 "Options\n"
@@ -4391,7 +4393,7 @@ msgstr ""
 "顯然地, 如果您的機器是當作一個伺服器或您不能成功地設定顯示,\n"
 "您想核對選取 \"%s\"."
 
-#: help.pm:316
+#: help.pm:317
 #, c-format
 msgid ""
 "You now need to decide where you want to install the Mandriva Linux\n"
@@ -4515,37 +4517,37 @@ msgstr ""
 "``Starter Guide (初學者指導)''的\n"
 "``Managing Your Partitions (管理您的分割)'' 部份."
 
-#: help.pm:374 install_interactive.pm:96
+#: help.pm:375 install_interactive.pm:96
 #, c-format
 msgid "Use free space"
 msgstr "使用未用到的空間"
 
-#: help.pm:374
+#: help.pm:375
 #, c-format
 msgid "Use existing partition"
 msgstr "使用已經存在的分割區"
 
-#: help.pm:374 install_interactive.pm:138
+#: help.pm:375 install_interactive.pm:138
 #, c-format
 msgid "Use the free space on the Microsoft Windows® partition"
 msgstr "使用 Windows 分割區所剩餘的可用空間"
 
-#: help.pm:374
+#: help.pm:375
 #, c-format
 msgid "Erase entire disk"
 msgstr "刪除所有磁碟內容"
 
-#: help.pm:374
+#: help.pm:375
 #, c-format
 msgid "Remove Windows"
 msgstr "移除 Windows"
 
-#: help.pm:374 install_interactive.pm:233
+#: help.pm:375 install_interactive.pm:233
 #, c-format
 msgid "Custom disk partitioning"
 msgstr "自訂磁碟分割"
 
-#: help.pm:377
+#: help.pm:378
 #, c-format
 msgid ""
 "There you are. Installation is now complete and your GNU/Linux system is\n"
@@ -4607,27 +4609,27 @@ msgstr ""
 "(*) 您需要一個 FAT-formatted 軟片. 要建立一張於於GNU/Linux 環境下,\n"
 "鍵入 \"mformat a:\", 或 \"fdformat /dev/fd0\" 然後 \"mkfs.vfat /dev/fd0\"."
 
-#: help.pm:409
+#: help.pm:410
 #, c-format
 msgid "Generate auto-install floppy"
 msgstr "產生自動安裝軟片"
 
-#: help.pm:409 install_steps_interactive.pm:1314
+#: help.pm:410 install_steps_interactive.pm:1314
 #, c-format
 msgid "Replay"
 msgstr "重播"
 
-#: help.pm:409 install_steps_interactive.pm:1314
+#: help.pm:410 install_steps_interactive.pm:1314
 #, c-format
 msgid "Automated"
 msgstr "自動化"
 
-#: help.pm:409 install_steps_interactive.pm:1317
+#: help.pm:410 install_steps_interactive.pm:1317
 #, c-format
 msgid "Save packages selection"
 msgstr "儲存套件選擇"
 
-#: help.pm:412
+#: help.pm:413
 #, c-format
 msgid ""
 "If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
@@ -4665,16 +4667,16 @@ msgstr ""
 "若您想選擇另一個分割給您的新的 Mandriva Linux 作業系統安裝, 點選了\"%s\".\n"
 "若您想選擇要被檢查磁碟上壞的區塊的分割, 點選.\"%s\"."
 
-#: help.pm:431 install_steps_gtk.pm:392 interactive.pm:437
+#: help.pm:432 install_steps_gtk.pm:392 interactive.pm:437
 #: interactive/newt.pm:318 printer/printerdrake.pm:3882
-#: standalone/drakTermServ:391 standalone/drakbackup:4048
-#: standalone/drakbackup:4084 standalone/drakbackup:4195
-#: standalone/drakbackup:4210 ugtk2.pm:488
+#: standalone/drakTermServ:391 standalone/drakbackup:4065
+#: standalone/drakbackup:4101 standalone/drakbackup:4212
+#: standalone/drakbackup:4227 ugtk2.pm:488
 #, c-format
 msgid "Previous"
 msgstr "上一步"
 
-#: help.pm:434
+#: help.pm:435
 #, c-format
 msgid ""
 "By the time you install Mandriva Linux, it's likely that some packages will\n"
@@ -4698,13 +4700,13 @@ msgstr ""
 "跟您近的. 一個套件選擇樹將出現: 審查選擇, 按下 \"%s\" 來擷取且安裝\n"
 "被選擇的套件, 或 \"%s\" 以中斷放棄."
 
-#: help.pm:444 help.pm:588 install_steps_gtk.pm:391
+#: help.pm:445 help.pm:589 install_steps_gtk.pm:391
 #: install_steps_interactive.pm:132
 #, c-format
 msgid "Install"
 msgstr "安裝"
 
-#: help.pm:447
+#: help.pm:448
 #, c-format
 msgid ""
 "At this point, DrakX will allow you to choose the security level you desire\n"
@@ -4729,12 +4731,12 @@ msgstr ""
 "入 \"%s\" 欄位. 安全性訊息將被寄到\n"
 "那個位址."
 
-#: help.pm:458
+#: help.pm:459
 #, c-format
 msgid "Security Administrator"
 msgstr "安全性管理員："
 
-#: help.pm:461
+#: help.pm:462
 #, c-format
 msgid ""
 "At this point, you need to choose which partition(s) will be used for the\n"
@@ -4868,17 +4870,17 @@ msgstr ""
 "像 50MB, 您或許發現它是一個好用的貯存一個備用核心與 ramdisk\n"
 "影像給緊急使用開機的好地方."
 
-#: help.pm:530
+#: help.pm:531
 #, c-format
 msgid "Removable media auto-mounting"
 msgstr "可移除式媒介自動掛載"
 
-#: help.pm:530
+#: help.pm:531
 #, c-format
 msgid "Toggle between normal/expert mode"
 msgstr "切換一般/專家模式"
 
-#: help.pm:533
+#: help.pm:534
 #, c-format
 msgid ""
 "More than one Microsoft partition has been detected on your hard drive.\n"
@@ -4938,7 +4940,7 @@ msgstr ""
 "\"Windows 名稱\" 是在 Windows 下的磁碟機代號名稱 (第一個磁碟或分割稱為\n"
 "\"C:\")."
 
-#: help.pm:564
+#: help.pm:565
 #, c-format
 msgid ""
 "\"%s\": check the current country selection. If you're not in this country,\n"
@@ -4950,7 +4952,7 @@ msgstr ""
 "請按下 \"%s\" 按鈕並選擇另一個。如果您的國家不在選單中，\n"
 "請按下 \"%s\" 按鈕來看完整的國家清單。"
 
-#: help.pm:569
+#: help.pm:570
 #, c-format
 msgid ""
 "This step is activated only if an existing GNU/Linux partition has been\n"
@@ -4991,7 +4993,7 @@ msgstr ""
 "使用 ``更新'' 選項應該在 Mandriva Linux 版本 \"8.1\" 或更新的系統上\n"
 "可以正常運作。不建議從 Mandriva Linux 版本 \"8.1\" 或更早的系統進行更新。"
 
-#: help.pm:591
+#: help.pm:592
 #, c-format
 msgid ""
 "Depending on the language you chose (), DrakX will automatically select a\n"
@@ -5024,7 +5026,7 @@ msgstr ""
 "如果您根據一個非拉丁語系字母選擇一個鍵盤形式，下一個對話窗將允許您選擇\n"
 "按鍵組合以便切換於拉丁與非拉丁鍵盤形式之中。"
 
-#: help.pm:609
+#: help.pm:610
 #, c-format
 msgid ""
 "The first step is to choose your preferred language.\n"
@@ -5101,12 +5103,12 @@ msgstr ""
 "\"localedrake\" 程式來改變用於整個系統上的語言。用一般使用者執行程式\n"
 "將只會改變對於那個特別使用者的語言設定."
 
-#: help.pm:647
+#: help.pm:648
 #, c-format
 msgid "Espanol"
 msgstr "西班牙語"
 
-#: help.pm:650
+#: help.pm:651
 #, c-format
 msgid ""
 "Usually, DrakX has no problems detecting the number of buttons on your\n"
@@ -5167,17 +5169,17 @@ msgstr ""
 "請捲動滑鼠滾輪以確定它正確被啟動。當您滾動滾輪，您將看見螢幕上的滾輪移動。\n"
 "測試按鍵並檢查當您移動您的滑鼠時游標是否在螢幕上移動。"
 
-#: help.pm:681
+#: help.pm:682
 #, c-format
 msgid "with Wheel emulation"
 msgstr "滾輪模擬"
 
-#: help.pm:681
+#: help.pm:682
 #, c-format
 msgid "Universal | Any PS/2 & USB mice"
 msgstr "通用 | 任何 PS/2 & USB 滑鼠"
 
-#: help.pm:684
+#: help.pm:685
 #, c-format
 msgid ""
 "Please select the correct port. For example, the \"COM1\" port under\n"
@@ -5186,7 +5188,7 @@ msgstr ""
 "請選擇正確的連接埠名稱. 比方, Windows 所稱呼的 \"COM1\"\n"
 "在 GNU/Linux 環境是稱呼為 \"ttyS0\"."
 
-#: help.pm:688
+#: help.pm:689
 #, c-format
 msgid ""
 "This is the most crucial decision point for the security of your GNU/Linux\n"
@@ -5252,12 +5254,12 @@ msgstr ""
 "如果您遇到記住密碼的問題, 或如果您的電腦將永遠不連上網際網路且您絕對相信\n"
 "所有使用您電腦的人，您可以選擇 \"%s\"."
 
-#: help.pm:722
+#: help.pm:723
 #, c-format
 msgid "authentication"
 msgstr "認證"
 
-#: help.pm:725
+#: help.pm:726
 #, c-format
 msgid ""
 "A boot loader is a little program which is started by the computer at boot\n"
@@ -5289,7 +5291,7 @@ msgstr ""
 "說，\"%s\" 是最安全的地方。選擇 \"%s\" 將不會安裝任何開機載入程式。只有在\n"
 "您很清楚您在做什麼時才選擇這個選項。"
 
-#: help.pm:742
+#: help.pm:743
 #, c-format
 msgid ""
 "Now, it's time to select a printing system for your computer. Other\n"
@@ -5338,22 +5340,22 @@ msgstr ""
 "如果您現在做出決定, 且您之後發現不喜歡您的列印系統, 您可以藉由從\n"
 "Mandriva Linux 控制中心執行 PrinterDrake 點選 \"%s\" 按鍵改變它."
 
-#: help.pm:765
+#: help.pm:766
 #, c-format
 msgid "pdq"
 msgstr "pdq"
 
-#: help.pm:765 printer/cups.pm:117 printer/data.pm:129
+#: help.pm:766 printer/cups.pm:117 printer/data.pm:129
 #, c-format
 msgid "CUPS"
 msgstr "CUPS"
 
-#: help.pm:765
+#: help.pm:766
 #, c-format
 msgid "Expert"
 msgstr "專家"
 
-#: help.pm:768
+#: help.pm:769
 #, c-format
 msgid ""
 "DrakX will first detect any IDE devices present in your computer. It will\n"
@@ -5386,7 +5388,7 @@ msgstr ""
 "若是 DrakX 無法偵測選項以自動決定那個參數需要被送到硬體, 您必須手動設定\n"
 "驅動程式."
 
-#: help.pm:786
+#: help.pm:787
 #, c-format
 msgid ""
 "\"%s\": if a sound card is detected on your system, it'll be displayed\n"
@@ -5396,13 +5398,13 @@ msgstr ""
 "\"%s\": 如果您的系統上有偵測到音效卡，它將會顯示在這裡。如果您發現這並不是\n"
 "目前您的系統使用的音效卡，您可以按下按鈕並選擇另一個驅動程式。"
 
-#: help.pm:788 help.pm:855 install_steps_interactive.pm:991
+#: help.pm:789 help.pm:856 install_steps_interactive.pm:991
 #: install_steps_interactive.pm:1008
 #, c-format
 msgid "Sound card"
 msgstr "音效卡"
 
-#: help.pm:791
+#: help.pm:792
 #, c-format
 msgid ""
 "As a review, DrakX will present a summary of information it has gathered\n"
@@ -5473,60 +5475,61 @@ msgid ""
 "idea to review this setup."
 msgstr ""
 
-#: help.pm:855 install_steps_interactive.pm:855
+#: help.pm:856 install_steps_interactive.pm:855
 #: install_steps_interactive.pm:950 standalone/drakclock:100
+#: standalone/finish-install:56 standalone/finish-install:57
 #, c-format
 msgid "Timezone"
 msgstr "時區"
 
-#: help.pm:855 install_steps_interactive.pm:1024
+#: help.pm:856 install_steps_interactive.pm:1024
 #, c-format
 msgid "TV card"
 msgstr "電視卡"
 
-#: help.pm:855
+#: help.pm:856
 #, c-format
 msgid "ISDN card"
 msgstr "ISDN 卡"
 
-#: help.pm:855
+#: help.pm:856
 #, c-format
 msgid "Graphical Interface"
 msgstr "圖形介面"
 
-#: help.pm:855 install_any.pm:1733 install_steps_interactive.pm:1042
-#: standalone/drakbackup:2039
+#: help.pm:856 install_any.pm:1733 install_steps_interactive.pm:1042
+#: standalone/drakbackup:2051
 #, c-format
 msgid "Network"
 msgstr "網路"
 
-#: help.pm:855 install_steps_interactive.pm:1054
+#: help.pm:856 install_steps_interactive.pm:1054
 #, c-format
 msgid "Proxies"
 msgstr "代理伺服器"
 
-#: help.pm:855 install_steps_interactive.pm:1065
+#: help.pm:856 install_steps_interactive.pm:1065
 #, c-format
 msgid "Security Level"
 msgstr "安全層級"
 
-#: help.pm:855 install_steps_interactive.pm:1079 network/drakfirewall.pm:189
+#: help.pm:856 install_steps_interactive.pm:1079 network/drakfirewall.pm:189
 #, c-format
 msgid "Firewall"
 msgstr "防火牆"
 
-#: help.pm:855 install_steps_interactive.pm:1095
+#: help.pm:856 install_steps_interactive.pm:1095
 #, c-format
 msgid "Bootloader"
 msgstr "開機載入程式"
 
-#: help.pm:855 install_steps_interactive.pm:1108 services.pm:114
+#: help.pm:856 install_steps_interactive.pm:1108 services.pm:114
 #: services.pm:157 services.pm:193
 #, c-format
 msgid "Services"
 msgstr "服務"
 
-#: help.pm:858
+#: help.pm:859
 #, c-format
 msgid ""
 "Choose the hard drive you want to erase in order to install your new\n"
@@ -5536,7 +5539,7 @@ msgstr ""
 "選擇您想要抹除的硬碟來安裝新的 Mandriva Linux 分割. 小心,\n"
 "磁碟上全部資料將遺失且將無法挽回!"
 
-#: help.pm:863
+#: help.pm:864
 #, c-format
 msgid ""
 "Click on \"%s\" if you want to delete all data and partitions present on\n"
@@ -5553,12 +5556,12 @@ msgstr ""
 "\n"
 "點選 \"%s\" 以不遺失在這個硬碟上的資料與分割放棄這個動作."
 
-#: help.pm:869
+#: help.pm:870
 #, c-format
 msgid "Next ->"
 msgstr "下一步 ->"
 
-#: help.pm:869
+#: help.pm:870
 #, c-format
 msgid "<- Previous"
 msgstr "<- 上一步"
@@ -5851,7 +5854,7 @@ msgstr ""
 "\n"
 "不管如何都要繼續？"
 
-#: install_interactive.pm:71 install_steps.pm:217
+#: install_interactive.pm:71 install_steps.pm:215
 #, c-format
 msgid "You must have a FAT partition mounted in /boot/efi"
 msgstr "您必須有一個掛載於 /boot/efi 的 FAT 分割區"
@@ -6278,12 +6281,12 @@ msgstr ""
 "(Official Mandriva Linux User's Guide) 的安裝後章節 (post install chapter )\n"
 "裡面找到。"
 
-#: install_steps.pm:252
+#: install_steps.pm:250
 #, c-format
 msgid "Duplicate mount point %s"
 msgstr "重複的掛載點 %s"
 
-#: install_steps.pm:484
+#: install_steps.pm:482
 #, c-format
 msgid ""
 "Some important packages did not get installed properly.\n"
@@ -6705,8 +6708,8 @@ msgstr ""
 msgid "Load"
 msgstr "載入"
 
-#: install_steps_interactive.pm:481 standalone/drakbackup:4066
-#: standalone/drakbackup:4136 standalone/logdrake:175
+#: install_steps_interactive.pm:481 standalone/drakbackup:4083
+#: standalone/drakbackup:4153 standalone/logdrake:175
 #, c-format
 msgid "Save"
 msgstr "儲存"
@@ -6836,6 +6839,7 @@ msgid "Would you like to try again?"
 msgstr "您要再試一次嗎？"
 
 #: install_steps_interactive.pm:855 standalone/drakclock:45
+#: standalone/finish-install:56
 #, c-format
 msgid "Which is your timezone?"
 msgstr "您的時區為何？"
@@ -6853,7 +6857,7 @@ msgstr "NTP 伺服器"
 #: install_steps_interactive.pm:923 install_steps_interactive.pm:931
 #: install_steps_interactive.pm:949 install_steps_interactive.pm:956
 #: install_steps_interactive.pm:1107 services.pm:133
-#: standalone/drakbackup:1584
+#: standalone/drakbackup:1596
 #, c-format
 msgid "System"
 msgstr "系統"
@@ -7053,8 +7057,8 @@ msgstr "  <Tab>/<Alt-Tab> 在元件間移動  | <Space> 選取 | <F12> 下個螢
 msgid "Choose a file"
 msgstr "選擇一個檔案"
 
-#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakbackup:1525
-#: standalone/drakfont:656 standalone/drakhosts:242 standalone/draknfs:605
+#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakbackup:1537
+#: standalone/drakfont:649 standalone/drakhosts:242 standalone/draknfs:605
 #: standalone/draksambashare:1127 standalone/drakups:299
 #: standalone/drakups:359 standalone/drakups:379 standalone/drakvpn:319
 #: standalone/drakvpn:680
@@ -7069,11 +7073,12 @@ msgstr "新增"
 msgid "Modify"
 msgstr "修改"
 
-#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakhosts:256
-#: standalone/draknfs:619 standalone/draksambashare:1085
-#: standalone/draksambashare:1145 standalone/draksambashare:1184
-#: standalone/drakups:301 standalone/drakups:361 standalone/drakups:381
-#: standalone/drakvpn:319 standalone/drakvpn:680
+#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakfont:732
+#: standalone/drakhosts:256 standalone/draknfs:619
+#: standalone/draksambashare:1085 standalone/draksambashare:1145
+#: standalone/draksambashare:1184 standalone/drakups:301
+#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:319
+#: standalone/drakvpn:680
 #, c-format
 msgid "Remove"
 msgstr "移除"
@@ -9111,7 +9116,7 @@ msgstr "尚比亞"
 msgid "Zimbabwe"
 msgstr "辛巴威"
 
-#: lang.pm:1141
+#: lang.pm:1149
 #, c-format
 msgid "Welcome to %s"
 msgstr "歡迎使用 %s"
@@ -9808,7 +9813,7 @@ msgstr ""
 "其他世界的通訊協定\n"
 "無 D-Channel (leased lines)"
 
-#: network/netconnect.pm:103 standalone/harddrake2:329
+#: network/netconnect.pm:103 standalone/harddrake2:328
 #: standalone/net_monitor:102 standalone/net_monitor:103
 #: standalone/net_monitor:108
 #, c-format
@@ -10082,7 +10087,7 @@ msgstr "網路裝置"
 msgid "External ISDN modem"
 msgstr "外接式 ISDN 數據機"
 
-#: network/netconnect.pm:384 standalone/harddrake2:216
+#: network/netconnect.pm:384 standalone/harddrake2:215
 #, c-format
 msgid "Select a device!"
 msgstr "選取一個裝置！"
@@ -12730,11 +12735,11 @@ msgstr "沒有指定印表機名稱！"
 #: printer/printerdrake.pm:2318 standalone/drakTermServ:475
 #: standalone/drakTermServ:807 standalone/drakTermServ:823
 #: standalone/drakTermServ:1653 standalone/drakTermServ:1662
-#: standalone/drakTermServ:1676 standalone/drakbackup:511
-#: standalone/drakbackup:617 standalone/drakbackup:652
-#: standalone/drakbackup:753 standalone/draknfs:203
+#: standalone/drakTermServ:1676 standalone/drakbackup:512
+#: standalone/drakbackup:618 standalone/drakbackup:653
+#: standalone/drakbackup:754 standalone/draknfs:203
 #: standalone/draksambashare:627 standalone/draksambashare:794
-#: standalone/harddrake2:276
+#: standalone/harddrake2:275
 #, c-format
 msgid "Information"
 msgstr "資訊"
@@ -13189,8 +13194,7 @@ msgstr "設定此印表機不使用 HPLIP"
 #, c-format
 msgid ""
 "HPLIP did not find any local printers (Parallel, USB) which it supports!"
-msgstr ""
-"HPLIP 沒有找到任何支援的本地端 (平行埠、USB) 印表機！"
+msgstr "HPLIP 沒有找到任何支援的本地端 (平行埠、USB) 印表機！"
 
 #: printer/printerdrake.pm:2622
 #, c-format
@@ -13249,8 +13253,8 @@ msgid ""
 "printer unaccessible from Windows clients. Do you really want to use this "
 "name?"
 msgstr ""
-"此印表機名稱 \"%s\" 超過 12 個字元長，這將使它無法被 Windows 客戶端所連結。"
-"您確定要使用這個名稱嗎？"
+"此印表機名稱 \"%s\" 超過 12 個字元長，這將使它無法被 Windows 客戶端所連結。您"
+"確定要使用這個名稱嗎？"
 
 #: printer/printerdrake.pm:2969
 #, c-format
@@ -13356,8 +13360,7 @@ msgstr ""
 msgid ""
 "This file is usually somewhere on the CD with the Windows and Mac drivers "
 "delivered with the printer."
-msgstr ""
-"這個檔案通常會在印表機出廠時隨附的 Windows 與 Mac 驅動程式光碟內。"
+msgstr "這個檔案通常會在印表機出廠時隨附的 Windows 與 Mac 驅動程式光碟內。"
 
 #: printer/printerdrake.pm:3204
 #, c-format
@@ -13379,8 +13382,8 @@ msgid ""
 "makes all options of the printer available which are provided by the "
 "printer's hardware"
 msgstr ""
-"設定印表機時安裝並使用此印表機的 PPD 檔案將使這台印表機硬體所提供的所有選項"
-"都可以使用。"
+"設定印表機時安裝並使用此印表機的 PPD 檔案將使這台印表機硬體所提供的所有選項都"
+"可以使用。"
 
 #: printer/printerdrake.pm:3207
 #, c-format
@@ -13607,9 +13610,8 @@ msgid ""
 "it is enough to print the standard test page."
 msgstr ""
 "請選取您要列印的測試頁。\n"
-"請注意：圖形測試頁會花費比較久的時間來列印，"
-"某些記憶體太少的雷射印表機甚至可能無法列印。"
-"一般來說，標準的測試頁就很足夠了。"
+"請注意：圖形測試頁會花費比較久的時間來列印，某些記憶體太少的雷射印表機甚至可"
+"能無法列印。一般來說，標準的測試頁就很足夠了。"
 
 #: printer/printerdrake.pm:3883
 #, c-format
@@ -13752,7 +13754,8 @@ msgid ""
 "To print a file from the command line (terminal window) use the command \"%s "
 "<file>\".\n"
 msgstr ""
-"要在命令列環境 (終端機視窗) 列印檔案的話，您可以執行這個指令 \"%s <檔案>\"。\n"
+"要在命令列環境 (終端機視窗) 列印檔案的話，您可以執行這個指令 \"%s <檔案>"
+"\"。\n"
 
 #: printer/printerdrake.pm:4046 printer/printerdrake.pm:4056
 #: printer/printerdrake.pm:4066
@@ -13855,16 +13858,15 @@ msgid ""
 "share your scanner on the network.\n"
 "\n"
 msgstr ""
-"執行 Scannerdrake (在 Mandriva Linux 控制中心的 \"硬體/掃描器\" 中) 來在"
-"網路上分享您的掃描器。\n"
+"執行 Scannerdrake (在 Mandriva Linux 控制中心的 \"硬體/掃描器\" 中) 來在網路"
+"上分享您的掃描器。\n"
 
 #: printer/printerdrake.pm:4118
 #, c-format
 msgid ""
 "The memory card readers in your printer can be accessed like a usual USB "
 "mass storage device. "
-msgstr ""
-"您印表機上的記憶卡讀卡機可以用像一般 USB 大量儲存裝置一樣的方式存取。"
+msgstr "您印表機上的記憶卡讀卡機可以用像一般 USB 大量儲存裝置一樣的方式存取。"
 
 #: printer/printerdrake.pm:4119
 #, c-format
@@ -13957,8 +13959,7 @@ msgstr ""
 msgid ""
 "PDQ only supports local printers, remote LPD printers, and Socket/TCP "
 "printers.\n"
-msgstr ""
-"PDQ 僅支援本地端印表機、遠端 LPD 印表機，以及 TCP/Socket 印表機。\n"
+msgstr "PDQ 僅支援本地端印表機、遠端 LPD 印表機，以及 TCP/Socket 印表機。\n"
 
 #: printer/printerdrake.pm:4178
 #, c-format
@@ -14472,7 +14473,7 @@ msgstr "這台印表機 \"%s\" 將會被設定成為預設印表機。"
 msgid "Can not add a partition to _formatted_ RAID %s"
 msgstr "無法在 _已格式_ 化的磁碟陣列 %s 中加入分割區"
 
-#: raid.pm:146
+#: raid.pm:148
 #, c-format
 msgid "Not enough partitions for RAID level %d\n"
 msgstr "分割區數目不足以用來設定成為階層 %d 的磁碟陣列\n"
@@ -16060,16 +16061,19 @@ msgid ""
 "along with this program; if not, write to the Free Software\n"
 "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
 msgstr ""
-"本程式是自由軟體，您可以遵照自由軟體基金會 (Free Software Foundation) 出版的\n" 
+"本程式是自由軟體，您可以遵照自由軟體基金會 (Free Software Foundation) 出版"
+"的\n"
 "GNU 通用公共許可證條款 (GNU General Public License) 第二版來修改和重新發佈\n"
 "這一程式，或者自由選擇使用任何更新的版本。\n"
 "\n"
-"發佈這一程式的目的是希望它有用，但沒有任何擔保。甚至沒有適合特定目的而隱含的擔保。\n"
+"發佈這一程式的目的是希望它有用，但沒有任何擔保。甚至沒有適合特定目的而隱含的"
+"擔保。\n"
 "更詳細的情況請參閱 GNU 通用公共許可證。\n"
 "\n"
-"您應該已經和程式一起收到一份 GNU 通用公共許可證的副本。如果還沒有，寫信給：Free\n"
+"您應該已經和程式一起收到一份 GNU 通用公共許可證的副本。如果還沒有，寫信給："
+"Free\n"
 "Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, \n"
-"MA 02111-1307, USA.\n" 
+"MA 02111-1307, USA.\n"
 
 #: standalone.pm:42
 #, c-format
@@ -17126,54 +17130,54 @@ msgstr "新增項目"
 msgid "Remove the last item"
 msgstr "移除之前項目"
 
-#: standalone/drakbackup:156
+#: standalone/drakbackup:157
 #, c-format
 msgid ""
 "Expect is an extension to the TCL scripting language that allows interactive "
 "sessions without user intervention."
 msgstr ""
 
-#: standalone/drakbackup:157
+#: standalone/drakbackup:158
 #, c-format
 msgid "Store the password for this system in drakbackup configuration."
 msgstr ""
 
-#: standalone/drakbackup:158
+#: standalone/drakbackup:159
 #, c-format
 msgid ""
 "For a multisession CD, only the first session will erase the cdrw. Otherwise "
 "the cdrw is erased before each backup."
 msgstr ""
 
-#: standalone/drakbackup:159
+#: standalone/drakbackup:160
 #, c-format
 msgid ""
 "This option will save files that have changed.  Exact behavior depends on "
 "whether incremental or differential mode is used."
 msgstr ""
 
-#: standalone/drakbackup:160
+#: standalone/drakbackup:161
 #, c-format
 msgid ""
 "Incremental backups only save files that have changed or are new since the "
 "last backup."
 msgstr ""
 
-#: standalone/drakbackup:161
+#: standalone/drakbackup:162
 #, c-format
 msgid ""
 "Differential backups only save files that have changed or are new since the "
 "original 'base' backup."
 msgstr ""
 
-#: standalone/drakbackup:162
+#: standalone/drakbackup:163
 #, c-format
 msgid ""
 "Star should be selected if you want to backup EA or ACLs, otherwise choose "
 "tar"
 msgstr ""
 
-#: standalone/drakbackup:163
+#: standalone/drakbackup:164
 #, c-format
 msgid ""
 "This should be a local user or email address that you want the backup "
@@ -17181,21 +17185,21 @@ msgid ""
 "users can be in a comma seperated list"
 msgstr ""
 
-#: standalone/drakbackup:164
+#: standalone/drakbackup:165
 #, c-format
 msgid ""
 "This should be the return address that you want the backup results sent "
 "from. Default is drakbackup."
 msgstr ""
 
-#: standalone/drakbackup:165
+#: standalone/drakbackup:166
 #, c-format
 msgid ""
 "Files or wildcards listed in a .backupignore file at the top of a directory "
 "tree will not be backed up."
 msgstr ""
 
-#: standalone/drakbackup:166
+#: standalone/drakbackup:167
 #, c-format
 msgid ""
 "For backups to other media, files are still created on the hard drive, then "
@@ -17203,14 +17207,14 @@ msgid ""
 "tar files after the backup."
 msgstr ""
 
-#: standalone/drakbackup:167
+#: standalone/drakbackup:168
 #, c-format
 msgid ""
 "Selecting this option allows you to view the raw output from the restore "
 "process, after a file restore."
 msgstr ""
 
-#: standalone/drakbackup:168
+#: standalone/drakbackup:169
 #, c-format
 msgid ""
 "Some protocols, like rsync, may be configured at the server end.  Rather "
@@ -17218,56 +17222,56 @@ msgid ""
 "path."
 msgstr ""
 
-#: standalone/drakbackup:169
+#: standalone/drakbackup:170
 #, c-format
 msgid ""
 "Custom allows you to specify your own day and time.  The other options use "
 "run-parts in /etc/crontab."
 msgstr ""
 
-#: standalone/drakbackup:343
+#: standalone/drakbackup:344
 #, c-format
 msgid "No media selected for cron operation."
 msgstr ""
 
-#: standalone/drakbackup:347
+#: standalone/drakbackup:348
 #, c-format
 msgid "No interval selected for cron operation."
 msgstr ""
 
-#: standalone/drakbackup:392
+#: standalone/drakbackup:393
 #, c-format
 msgid "Interval cron not available as non-root"
 msgstr "使用非 root 身份時無法使用 Interval Cron"
 
-#: standalone/drakbackup:476 standalone/logdrake:439
+#: standalone/drakbackup:477 standalone/logdrake:439
 #, c-format
 msgid "\"%s\" neither is a valid email nor is an existing local user!"
 msgstr ""
 
-#: standalone/drakbackup:480 standalone/logdrake:444
+#: standalone/drakbackup:481 standalone/logdrake:444
 #, c-format
 msgid ""
 "\"%s\" is a local user, but you did not select a local smtp, so you must use "
 "a complete email address!"
 msgstr ""
 
-#: standalone/drakbackup:490
+#: standalone/drakbackup:491
 #, c-format
 msgid "Valid user list changed, rewriting config file."
 msgstr ""
 
-#: standalone/drakbackup:492
+#: standalone/drakbackup:493
 #, c-format
 msgid "Old user list:\n"
 msgstr "舊的使用者清單:\n"
 
-#: standalone/drakbackup:494
+#: standalone/drakbackup:495
 #, c-format
 msgid "New user list:\n"
 msgstr "新的使用者清單:\n"
 
-#: standalone/drakbackup:523
+#: standalone/drakbackup:524
 #, c-format
 msgid ""
 "\n"
@@ -17276,7 +17280,7 @@ msgstr ""
 "\n"
 "                      DrakBackup 報表清單 \n"
 
-#: standalone/drakbackup:524
+#: standalone/drakbackup:525
 #, c-format
 msgid ""
 "\n"
@@ -17285,7 +17289,7 @@ msgstr ""
 "\n"
 "                      DrakBackup Daemon 報表清單\n"
 
-#: standalone/drakbackup:530
+#: standalone/drakbackup:531
 #, c-format
 msgid ""
 "\n"
@@ -17298,13 +17302,13 @@ msgstr ""
 "\n"
 "\n"
 
-#: standalone/drakbackup:555 standalone/drakbackup:626
-#: standalone/drakbackup:682
+#: standalone/drakbackup:556 standalone/drakbackup:627
+#: standalone/drakbackup:683
 #, c-format
 msgid "Total progress"
 msgstr "全部進度"
 
-#: standalone/drakbackup:608
+#: standalone/drakbackup:609
 #, c-format
 msgid ""
 "%s exists, delete?\n"
@@ -17317,42 +17321,42 @@ msgstr ""
 "警告：若是您已經完成該工作進度, 也許您可以刪除該主機上\n"
 "認證憑證檔案。"
 
-#: standalone/drakbackup:617
+#: standalone/drakbackup:618
 #, c-format
 msgid "This may take a moment to generate the keys."
 msgstr "產生憑證檔案, 請稍後...。"
 
-#: standalone/drakbackup:624
+#: standalone/drakbackup:625
 #, c-format
 msgid "Cannot spawn %s."
 msgstr "無法產生 %s。"
 
-#: standalone/drakbackup:641
+#: standalone/drakbackup:642
 #, c-format
 msgid "No password prompt on %s at port %s"
 msgstr "%s 無密碼回應 (位於連接埠 %s)"
 
-#: standalone/drakbackup:642
+#: standalone/drakbackup:643
 #, c-format
 msgid "Bad password on %s"
 msgstr "%s - 錯誤的密碼"
 
-#: standalone/drakbackup:643
+#: standalone/drakbackup:644
 #, c-format
 msgid "Permission denied transferring %s to %s"
 msgstr "由 %s 傳輸到 %s 發生錯誤, 權限拒絕"
 
-#: standalone/drakbackup:644
+#: standalone/drakbackup:645
 #, c-format
 msgid "Can not find %s on %s"
 msgstr "無法找到 %s (位於 %s)"
 
-#: standalone/drakbackup:648
+#: standalone/drakbackup:649
 #, c-format
 msgid "%s not responding"
 msgstr "%s 沒有正常回應"
 
-#: standalone/drakbackup:652
+#: standalone/drakbackup:653
 #, c-format
 msgid ""
 "Transfer successful\n"
@@ -17369,74 +17373,74 @@ msgstr ""
 "\n"
 "這應該不需要輸入任何密碼."
 
-#: standalone/drakbackup:702
+#: standalone/drakbackup:703
 #, c-format
 msgid "No CD-R/DVD-R in drive!"
 msgstr "未放入 CDR/DVDR！"
 
-#: standalone/drakbackup:706
+#: standalone/drakbackup:707
 #, c-format
 msgid "Does not appear to be recordable media!"
 msgstr "似乎不是可燒錄的媒介裝置！"
 
-#: standalone/drakbackup:711
+#: standalone/drakbackup:712
 #, c-format
 msgid "Not erasable media!"
 msgstr "不是可抹寫的媒介裝置！"
 
-#: standalone/drakbackup:753
+#: standalone/drakbackup:754
 #, c-format
 msgid "This may take a moment to erase the media."
 msgstr "刪除該媒介裝置需要花費一些時間。"
 
-#: standalone/drakbackup:811
+#: standalone/drakbackup:812
 #, c-format
 msgid "Permission problem accessing CD."
 msgstr "權限的問題無法存取 CD."
 
-#: standalone/drakbackup:838
+#: standalone/drakbackup:840
 #, c-format
 msgid "No tape in %s!"
 msgstr "%s 內未放入磁帶！"
 
-#: standalone/drakbackup:947
+#: standalone/drakbackup:953
 #, c-format
 msgid ""
 "Backup destination quota exceeded!\n"
 "%d MB used vs %d MB allocated."
 msgstr ""
 
-#: standalone/drakbackup:967 standalone/drakbackup:999
+#: standalone/drakbackup:973 standalone/drakbackup:1005
 #, c-format
 msgid "Backup system files..."
 msgstr "備份系統檔案..."
 
-#: standalone/drakbackup:1000 standalone/drakbackup:1039
+#: standalone/drakbackup:1006 standalone/drakbackup:1045
 #, c-format
 msgid "Hard Disk Backup files..."
 msgstr "硬碟備份檔案..."
 
-#: standalone/drakbackup:1038
+#: standalone/drakbackup:1044
 #, c-format
 msgid "Backup User files..."
 msgstr "備份使用者檔案..."
 
-#: standalone/drakbackup:1072
+#: standalone/drakbackup:1078
 #, c-format
 msgid "Backup Other files..."
 msgstr "備份其他檔案..."
 
-#: standalone/drakbackup:1073
+#: standalone/drakbackup:1079
 #, c-format
 msgid "Hard Disk Backup Progress..."
 msgstr "硬碟備份進度..."
 
-#: standalone/drakbackup:1078
+#: standalone/drakbackup:1084
 #, c-format
 msgid "No changes to backup!"
 msgstr "備份沒有任何異動！"
 
-#: standalone/drakbackup:1094 standalone/drakbackup:1116
+#: standalone/drakbackup:1100 standalone/drakbackup:1122
 #, c-format
 msgid ""
 "\n"
@@ -17447,7 +17451,7 @@ msgstr ""
 "Drakbackup 透過 %s 活動:\n"
 "\n"
 
-#: standalone/drakbackup:1103
+#: standalone/drakbackup:1109
 #, c-format
 msgid ""
 "\n"
@@ -17457,18 +17461,18 @@ msgstr ""
 "\n"
 "(!) FTP 連結錯誤：由於 FTP 連線錯誤, 備份檔案將沒透過 FTP 備份傳送出去。\n"
 
-#: standalone/drakbackup:1104
+#: standalone/drakbackup:1110
 #, c-format
 msgid ""
 "Error during sending file via FTP. Please correct your FTP configuration."
 msgstr "使用 FTP 上傳檔案時發生錯誤。請修正您的 FTP 設定。"
 
-#: standalone/drakbackup:1106
+#: standalone/drakbackup:1112
 #, c-format
 msgid "file list sent by FTP: %s\n"
 msgstr "FTP 傳送的檔案清單: %s\n"
 
-#: standalone/drakbackup:1121
+#: standalone/drakbackup:1127
 #, c-format
 msgid ""
 "\n"
@@ -17479,7 +17483,7 @@ msgstr ""
 "Drakbackup 使用 CD 方式進行處理：\n"
 "\n"
 
-#: standalone/drakbackup:1126
+#: standalone/drakbackup:1132
 #, c-format
 msgid ""
 "\n"
@@ -17490,237 +17494,237 @@ msgstr ""
 "Drakbackup 使用磁帶機方式進行處理：\n"
 "\n"
 
-#: standalone/drakbackup:1135
+#: standalone/drakbackup:1141
 #, c-format
 msgid "Error sending mail. Your report mail was not sent."
 msgstr "傳送郵件時發生錯誤。您的備份報告郵件未寄出。"
 
-#: standalone/drakbackup:1136
+#: standalone/drakbackup:1142
 #, c-format
 msgid " Error while sending mail. \n"
 msgstr "郵件發送時發生錯誤。\n"
 
-#: standalone/drakbackup:1166
+#: standalone/drakbackup:1172
 #, c-format
 msgid "Can not create catalog!"
 msgstr "無法建立 catalog 資訊"
 
-#: standalone/drakbackup:1320
+#: standalone/drakbackup:1332
 #, fuzzy, c-format
 msgid "Problem installing %s"
 msgstr "安裝 %s 套件發生錯誤"
 
-#: standalone/drakbackup:1408
+#: standalone/drakbackup:1420
 #, c-format
 msgid "Backup your System files. (/etc directory)"
 msgstr "備份您的系統檔案。(/etc 目錄)"
 
-#: standalone/drakbackup:1409 standalone/drakbackup:1472
-#: standalone/drakbackup:1538
+#: standalone/drakbackup:1421 standalone/drakbackup:1484
+#: standalone/drakbackup:1550
 #, c-format
 msgid "Use Incremental/Differential Backups  (do not replace old backups)"
 msgstr "使用遞增/差異檔案備份 (不會覆蓋舊有備份)"
 
-#: standalone/drakbackup:1411 standalone/drakbackup:1474
-#: standalone/drakbackup:1540
+#: standalone/drakbackup:1423 standalone/drakbackup:1486
+#: standalone/drakbackup:1552
 #, c-format
 msgid "Use Incremental Backups"
 msgstr "使用遞增備份 (不會覆蓋舊有備份)"
 
-#: standalone/drakbackup:1411 standalone/drakbackup:1474
-#: standalone/drakbackup:1540
+#: standalone/drakbackup:1423 standalone/drakbackup:1486
+#: standalone/drakbackup:1552
 #, c-format
 msgid "Use Differential Backups"
 msgstr ""
 
-#: standalone/drakbackup:1413
+#: standalone/drakbackup:1425
 #, c-format
 msgid "Do not include critical files (passwd, group, fstab)"
 msgstr "不要包含重要的檔案 (passwd、group、fstab)"
 
-#: standalone/drakbackup:1444
+#: standalone/drakbackup:1456
 #, c-format
 msgid "Please check all users that you want to include in your backup."
 msgstr "請檢查希望要備份的所有使用者項目。"
 
-#: standalone/drakbackup:1471
+#: standalone/drakbackup:1483
 #, c-format
 msgid "Do not include the browser cache"
 msgstr "不要包含瀏覽器的快取資料檔"
 
-#: standalone/drakbackup:1525
+#: standalone/drakbackup:1537
 #, c-format
 msgid "Select the files or directories and click on 'OK'"
 msgstr "選取檔案或者是目錄, 然後點選 '加入'"
 
-#: standalone/drakbackup:1526 standalone/drakfont:657
+#: standalone/drakbackup:1538 standalone/drakfont:650
 #, c-format
 msgid "Remove Selected"
 msgstr "移除選取項目"
 
-#: standalone/drakbackup:1589
+#: standalone/drakbackup:1601
 #, c-format
 msgid "Users"
 msgstr "使用者"
 
-#: standalone/drakbackup:1609
+#: standalone/drakbackup:1621
 #, c-format
 msgid "Use network connection to backup"
 msgstr "使用 FTP 連線備份"
 
-#: standalone/drakbackup:1611
+#: standalone/drakbackup:1623
 #, c-format
 msgid "Net Method:"
 msgstr "網路方式:"
 
-#: standalone/drakbackup:1615
+#: standalone/drakbackup:1627
 #, c-format
 msgid "Use Expect for SSH"
 msgstr ""
 
-#: standalone/drakbackup:1616
+#: standalone/drakbackup:1628
 #, c-format
 msgid "Create/Transfer backup keys for SSH"
 msgstr "建立/傳送 SSH 的備份憑證"
 
-#: standalone/drakbackup:1618
+#: standalone/drakbackup:1630
 #, c-format
 msgid "Transfer Now"
 msgstr "現在傳送"
 
-#: standalone/drakbackup:1620
+#: standalone/drakbackup:1632
 #, c-format
 msgid "Other (not drakbackup) keys in place already"
 msgstr "其他 (非 drakbackup) 認證憑證檔案已經存在"
 
-#: standalone/drakbackup:1623
+#: standalone/drakbackup:1635
 #, c-format
 msgid "Host name or IP."
 msgstr "主機名稱或 IP."
 
-#: standalone/drakbackup:1628
+#: standalone/drakbackup:1640
 #, c-format
 msgid "Directory (or module) to put the backup on this host."
 msgstr "請輸入要備份到該主機的所在目錄名稱"
 
-#: standalone/drakbackup:1640
+#: standalone/drakbackup:1652
 #, c-format
 msgid "Remember this password"
 msgstr "記住該密碼"
 
-#: standalone/drakbackup:1652
+#: standalone/drakbackup:1664
 #, c-format
 msgid "Need hostname, username and password!"
 msgstr "需要指定主機名稱、使用者與密碼！"
 
-#: standalone/drakbackup:1743
+#: standalone/drakbackup:1755
 #, c-format
 msgid "Use CD-R/DVD-R to backup"
 msgstr "使用 CD/DVDROM 備份"
 
-#: standalone/drakbackup:1746
+#: standalone/drakbackup:1758
 #, c-format
 msgid "Choose your CD/DVD device"
 msgstr "請選取您的 CD/DVD 裝置"
 
-#: standalone/drakbackup:1751
+#: standalone/drakbackup:1763
 #, c-format
 msgid "Choose your CD/DVD media size"
 msgstr "請選取您的 CD/DVD 容量大小"
 
-#: standalone/drakbackup:1758
+#: standalone/drakbackup:1770
 #, c-format
 msgid "Multisession CD"
 msgstr "Multisession CD"
 
-#: standalone/drakbackup:1760
+#: standalone/drakbackup:1772
 #, c-format
 msgid "CDRW media"
 msgstr ""
 
-#: standalone/drakbackup:1766
+#: standalone/drakbackup:1778
 #, c-format
 msgid "Erase your RW media (1st Session)"
 msgstr "清除您的可複寫媒介 (第一個資料軌)"
 
-#: standalone/drakbackup:1767
+#: standalone/drakbackup:1779
 #, c-format
 msgid " Erase Now "
 msgstr " 刪除中 "
 
-#: standalone/drakbackup:1773
+#: standalone/drakbackup:1785
 #, c-format
 msgid "DVD+RW media"
 msgstr ""
 
-#: standalone/drakbackup:1775
+#: standalone/drakbackup:1787
 #, c-format
 msgid "DVD-R media"
 msgstr "DVD-R 媒體"
 
-#: standalone/drakbackup:1777
+#: standalone/drakbackup:1789
 #, c-format
 msgid "DVDRAM device"
 msgstr "DVDRAM 裝置"
 
-#: standalone/drakbackup:1808
+#: standalone/drakbackup:1820
 #, c-format
 msgid "No CD device defined!"
 msgstr "尚未定義任何 CD 裝置!"
 
-#: standalone/drakbackup:1850
+#: standalone/drakbackup:1862
 #, c-format
 msgid "Use tape to backup"
 msgstr "使用磁帶進行備份"
 
-#: standalone/drakbackup:1853
+#: standalone/drakbackup:1865
 #, c-format
 msgid "Device name to use for backup"
 msgstr "請輸入您要用來備份使用的裝置名稱"
 
-#: standalone/drakbackup:1859
+#: standalone/drakbackup:1871
 #, c-format
 msgid "Backup directly to tape"
 msgstr ""
 
-#: standalone/drakbackup:1865
+#: standalone/drakbackup:1877
 #, c-format
 msgid "Use tape hardware compression (EXPERIMENTAL)"
 msgstr ""
 
-#: standalone/drakbackup:1871
+#: standalone/drakbackup:1883
 #, c-format
 msgid "Do not rewind tape after backup"
 msgstr "備份之後不回捲磁帶"
 
-#: standalone/drakbackup:1877
+#: standalone/drakbackup:1889
 #, c-format
 msgid "Erase tape before backup"
 msgstr "進行備份前抹除磁帶"
 
-#: standalone/drakbackup:1883
+#: standalone/drakbackup:1895
 #, c-format
 msgid "Eject tape after the backup"
 msgstr "備份完畢後退出磁帶"
 
-#: standalone/drakbackup:1964
+#: standalone/drakbackup:1976
 #, c-format
 msgid "Enter the directory to save to:"
 msgstr "請輸入您要儲存的目錄名稱："
 
-#: standalone/drakbackup:1968
+#: standalone/drakbackup:1980
 #, c-format
 msgid "Directory to save to"
 msgstr "儲存的目錄"
 
-#: standalone/drakbackup:1973
+#: standalone/drakbackup:1985
 #, c-format
 msgid ""
 "Maximum disk space\n"
 " allocated for backups (MB)"
 msgstr ""
 
-#: standalone/drakbackup:1977
+#: standalone/drakbackup:1989
 #, c-format
 msgid ""
 "Delete incremental or differential\n"
@@ -17728,343 +17732,343 @@ msgid ""
 " (0 is keep all backups) to save space"
 msgstr ""
 
-#: standalone/drakbackup:2044
+#: standalone/drakbackup:2056
 #, c-format
 msgid "CD-R / DVD-R"
 msgstr "CDROM / DVDROM"
 
-#: standalone/drakbackup:2049
+#: standalone/drakbackup:2061
 #, c-format
 msgid "HardDrive / NFS"
 msgstr "硬碟 / NFS"
 
-#: standalone/drakbackup:2064 standalone/drakbackup:2065
-#: standalone/drakbackup:2070
+#: standalone/drakbackup:2076 standalone/drakbackup:2077
+#: standalone/drakbackup:2082
 #, c-format
 msgid "hourly"
 msgstr "每小時"
 
-#: standalone/drakbackup:2064 standalone/drakbackup:2066
-#: standalone/drakbackup:2071
+#: standalone/drakbackup:2076 standalone/drakbackup:2078
+#: standalone/drakbackup:2083
 #, c-format
 msgid "daily"
 msgstr "每天"
 
-#: standalone/drakbackup:2064 standalone/drakbackup:2067
-#: standalone/drakbackup:2072
+#: standalone/drakbackup:2076 standalone/drakbackup:2079
+#: standalone/drakbackup:2084
 #, c-format
 msgid "weekly"
 msgstr "每週"
 
-#: standalone/drakbackup:2064 standalone/drakbackup:2068
-#: standalone/drakbackup:2073
+#: standalone/drakbackup:2076 standalone/drakbackup:2080
+#: standalone/drakbackup:2085
 #, c-format
 msgid "monthly"
 msgstr "每月"
 
-#: standalone/drakbackup:2064 standalone/drakbackup:2069
-#: standalone/drakbackup:2074
+#: standalone/drakbackup:2076 standalone/drakbackup:2081
+#: standalone/drakbackup:2086
 #, c-format
 msgid "custom"
 msgstr "自訂"
 
-#: standalone/drakbackup:2078
+#: standalone/drakbackup:2090
 #, c-format
 msgid "January"
 msgstr "1月"
 
-#: standalone/drakbackup:2078
+#: standalone/drakbackup:2090
 #, c-format
 msgid "February"
 msgstr "2月"
 
-#: standalone/drakbackup:2078
+#: standalone/drakbackup:2090
 #, c-format
 msgid "March"
 msgstr "3月"
 
-#: standalone/drakbackup:2079
+#: standalone/drakbackup:2091
 #, c-format
 msgid "April"
 msgstr "4月"
 
-#: standalone/drakbackup:2079
+#: standalone/drakbackup:2091
 #, c-format
 msgid "May"
 msgstr "5月"
 
-#: standalone/drakbackup:2079
+#: standalone/drakbackup:2091
 #, c-format
 msgid "June"
 msgstr "6月"
 
-#: standalone/drakbackup:2079
+#: standalone/drakbackup:2091
 #, c-format
 msgid "July"
 msgstr "7月"
 
-#: standalone/drakbackup:2079
+#: standalone/drakbackup:2091
 #, c-format
 msgid "August"
 msgstr "8月"
 
-#: standalone/drakbackup:2079
+#: standalone/drakbackup:2091
 #, c-format
 msgid "September"
 msgstr "9月"
 
-#: standalone/drakbackup:2080
+#: standalone/drakbackup:2092
 #, c-format
 msgid "October"
 msgstr "10月"
 
-#: standalone/drakbackup:2080
+#: standalone/drakbackup:2092
 #, c-format
 msgid "November"
 msgstr "11月"
 
-#: standalone/drakbackup:2080
+#: standalone/drakbackup:2092
 #, c-format
 msgid "December"
 msgstr "12月"
 
-#: standalone/drakbackup:2083
+#: standalone/drakbackup:2095
 #, c-format
 msgid "Sunday"
 msgstr "星期日"
 
-#: standalone/drakbackup:2083
+#: standalone/drakbackup:2095
 #, c-format
 msgid "Monday"
 msgstr "星期一"
 
-#: standalone/drakbackup:2083
+#: standalone/drakbackup:2095
 #, c-format
 msgid "Tuesday"
 msgstr "星期二"
 
-#: standalone/drakbackup:2084
+#: standalone/drakbackup:2096
 #, c-format
 msgid "Wednesday"
 msgstr "星期三"
 
-#: standalone/drakbackup:2084
+#: standalone/drakbackup:2096
 #, c-format
 msgid "Thursday"
 msgstr "星期四"
 
-#: standalone/drakbackup:2084
+#: standalone/drakbackup:2096
 #, c-format
 msgid "Friday"
 msgstr "星期五"
 
-#: standalone/drakbackup:2084
+#: standalone/drakbackup:2096
 #, c-format
 msgid "Saturday"
 msgstr "星期六"
 
-#: standalone/drakbackup:2114
+#: standalone/drakbackup:2126
 #, fuzzy, c-format
 msgid "Delete cron entry"
 msgstr "刪除用戶端"
 
-#: standalone/drakbackup:2115
+#: standalone/drakbackup:2127
 #, fuzzy, c-format
 msgid "Add cron entry"
 msgstr "新增"
 
-#: standalone/drakbackup:2173
+#: standalone/drakbackup:2185
 #, c-format
 msgid "Use daemon"
 msgstr "使用排程程式"
 
-#: standalone/drakbackup:2177
+#: standalone/drakbackup:2189
 #, c-format
 msgid "Please choose the time interval between each backup"
 msgstr "請輸入每一次備份的間隔時間"
 
-#: standalone/drakbackup:2185
+#: standalone/drakbackup:2197
 #, c-format
 msgid "Minute"
 msgstr "分"
 
-#: standalone/drakbackup:2189
+#: standalone/drakbackup:2201
 #, c-format
 msgid "Hour"
 msgstr "時"
 
-#: standalone/drakbackup:2193
+#: standalone/drakbackup:2205
 #, c-format
 msgid "Day"
 msgstr "天"
 
-#: standalone/drakbackup:2197
+#: standalone/drakbackup:2209
 #, c-format
 msgid "Month"
 msgstr "月"
 
-#: standalone/drakbackup:2201
+#: standalone/drakbackup:2213
 #, fuzzy, c-format
 msgid "Weekday (start)"
 msgstr "星期"
 
-#: standalone/drakbackup:2205
+#: standalone/drakbackup:2217
 #, fuzzy, c-format
 msgid "Weekday (end)"
 msgstr "星期"
 
-#: standalone/drakbackup:2209
+#: standalone/drakbackup:2221
 #, fuzzy, c-format
 msgid "Profile"
 msgstr "自訂檔案"
 
-#: standalone/drakbackup:2215
+#: standalone/drakbackup:2227
 #, fuzzy, c-format
 msgid "Current crontab:"
 msgstr "目前使用者"
 
-#: standalone/drakbackup:2223
+#: standalone/drakbackup:2235
 #, c-format
 msgid "Please choose the media for backup."
 msgstr "請選擇要用來備份的媒介"
 
-#: standalone/drakbackup:2227
+#: standalone/drakbackup:2239
 #, c-format
 msgid "Please be sure that the cron daemon is included in your services."
 msgstr "請確定您有啟用 cron 排程服務程式。"
 
-#: standalone/drakbackup:2228
+#: standalone/drakbackup:2240
 #, c-format
 msgid ""
 "If your machine is not on all the time, you might want to install anacron."
 msgstr ""
 
-#: standalone/drakbackup:2304
+#: standalone/drakbackup:2316
 #, fuzzy, c-format
 msgid "Please choose the archive program"
 msgstr "請選取要回存的日期："
 
-#: standalone/drakbackup:2309
+#: standalone/drakbackup:2321
 #, c-format
 msgid "Please choose the compression type"
 msgstr "請選取要壓縮的方式"
 
-#: standalone/drakbackup:2313
+#: standalone/drakbackup:2325
 #, c-format
 msgid "Use .backupignore files"
 msgstr "使用 .backupignore 檔案"
 
-#: standalone/drakbackup:2315
+#: standalone/drakbackup:2327
 #, c-format
 msgid "Send mail report after each backup to:"
 msgstr "在每次備份完成後發送郵件通知該使用者："
 
-#: standalone/drakbackup:2321
+#: standalone/drakbackup:2333
 #, c-format
 msgid "Return address for sent mail:"
 msgstr ""
 
-#: standalone/drakbackup:2327
+#: standalone/drakbackup:2339
 #, c-format
 msgid "SMTP server for mail:"
 msgstr "電子郵件 SMTP 伺服器名稱：”"
 
-#: standalone/drakbackup:2331
+#: standalone/drakbackup:2343
 #, c-format
 msgid "Delete Hard Drive tar files after backup to other media."
 msgstr "備份成功後刪除硬碟上的 tar 檔案"
 
-#: standalone/drakbackup:2332
+#: standalone/drakbackup:2344
 #, fuzzy, c-format
 msgid "View restore log after file restore."
 msgstr "選取 OK 來回存其他檔案。"
 
-#: standalone/drakbackup:2377
+#: standalone/drakbackup:2389
 #, c-format
 msgid "What"
 msgstr "備份項目設定"
 
-#: standalone/drakbackup:2382
+#: standalone/drakbackup:2394
 #, c-format
 msgid "Where"
 msgstr "備份儲存位置設定"
 
-#: standalone/drakbackup:2387
+#: standalone/drakbackup:2399
 #, c-format
 msgid "When"
 msgstr "備份時間設定"
 
-#: standalone/drakbackup:2392
+#: standalone/drakbackup:2404
 #, c-format
 msgid "More Options"
 msgstr "更多選項"
 
-#: standalone/drakbackup:2405
+#: standalone/drakbackup:2417
 #, c-format
 msgid "Backup destination not configured..."
 msgstr "備份功能尚未設定..."
 
-#: standalone/drakbackup:2425 standalone/drakbackup:4350
+#: standalone/drakbackup:2437 standalone/drakbackup:4367
 #, c-format
 msgid "Drakbackup Configuration"
 msgstr "Drakbackup 組態"
 
-#: standalone/drakbackup:2441
+#: standalone/drakbackup:2453
 #, c-format
 msgid "Please choose where you want to backup"
 msgstr "請選取您要備份的項目"
 
-#: standalone/drakbackup:2444
+#: standalone/drakbackup:2456
 #, c-format
 msgid "Hard Drive used to prepare backups for all media"
 msgstr "使用硬碟以準備所有媒介的備份"
 
-#: standalone/drakbackup:2444
+#: standalone/drakbackup:2456
 #, c-format
 msgid "Across Network"
 msgstr "透過網路"
 
-#: standalone/drakbackup:2444
+#: standalone/drakbackup:2456
 #, c-format
 msgid "On CD-R"
 msgstr "於 CD-R 裝置"
 
-#: standalone/drakbackup:2444
+#: standalone/drakbackup:2456
 #, c-format
 msgid "On Tape Device"
 msgstr "於磁帶機裝置"
 
-#: standalone/drakbackup:2490
+#: standalone/drakbackup:2502
 #, c-format
 msgid "Backup Users"
 msgstr "備份使用者資料"
 
-#: standalone/drakbackup:2491
+#: standalone/drakbackup:2503
 #, c-format
 msgid " (Default is all users)"
 msgstr " (預設是所有使用者)"
 
-#: standalone/drakbackup:2504
+#: standalone/drakbackup:2516
 #, c-format
 msgid "Please choose what you want to backup"
 msgstr "請選取您要備份的項目"
 
-#: standalone/drakbackup:2505
+#: standalone/drakbackup:2517
 #, c-format
 msgid "Backup System"
 msgstr "備份系統資料"
 
-#: standalone/drakbackup:2507
+#: standalone/drakbackup:2519
 #, c-format
 msgid "Select user manually"
 msgstr "手動選取使用者"
 
-#: standalone/drakbackup:2536
+#: standalone/drakbackup:2548
 #, c-format
 msgid "Please select data to backup..."
 msgstr "請選擇用來備份資料的裝置..."
 
-#: standalone/drakbackup:2608
+#: standalone/drakbackup:2620
 #, c-format
 msgid ""
 "\n"
@@ -18073,7 +18077,7 @@ msgstr ""
 "\n"
 "備份來源檔：\n"
 
-#: standalone/drakbackup:2609
+#: standalone/drakbackup:2621
 #, c-format
 msgid ""
 "\n"
@@ -18082,7 +18086,7 @@ msgstr ""
 "\n"
 "- 系統檔案：\n"
 
-#: standalone/drakbackup:2611
+#: standalone/drakbackup:2623
 #, c-format
 msgid ""
 "\n"
@@ -18091,7 +18095,7 @@ msgstr ""
 "\n"
 "- 使用者檔案：\n"
 
-#: standalone/drakbackup:2613
+#: standalone/drakbackup:2625
 #, c-format
 msgid ""
 "\n"
@@ -18100,7 +18104,7 @@ msgstr ""
 "\n"
 "- 其他檔案：\n"
 
-#: standalone/drakbackup:2615
+#: standalone/drakbackup:2627
 #, c-format
 msgid ""
 "\n"
@@ -18109,17 +18113,17 @@ msgstr ""
 "\n"
 "- 儲存於硬碟的路徑：%s\n"
 
-#: standalone/drakbackup:2616
+#: standalone/drakbackup:2628
 #, c-format
 msgid "\tLimit disk usage to %s MB\n"
 msgstr "\t限制磁碟使用量為 %s MB\n"
 
-#: standalone/drakbackup:2617
+#: standalone/drakbackup:2629
 #, c-format
 msgid "\tDelete backups older than %s day(s)\n"
 msgstr ""
 
-#: standalone/drakbackup:2620
+#: standalone/drakbackup:2632
 #, c-format
 msgid ""
 "\n"
@@ -18128,7 +18132,7 @@ msgstr ""
 "\n"
 "- 備份完成後刪除硬碟內先前備份的 tar 檔案。\n"
 
-#: standalone/drakbackup:2625
+#: standalone/drakbackup:2637
 #, c-format
 msgid ""
 "\n"
@@ -18137,22 +18141,22 @@ msgstr ""
 "\n"
 "- 燒錄到 CD 片"
 
-#: standalone/drakbackup:2626
+#: standalone/drakbackup:2638
 #, c-format
 msgid "RW"
 msgstr "讀寫"
 
-#: standalone/drakbackup:2627
+#: standalone/drakbackup:2639
 #, c-format
 msgid " on device: %s"
 msgstr " 位於位置: %s"
 
-#: standalone/drakbackup:2628
+#: standalone/drakbackup:2640
 #, c-format
 msgid " (multi-session)"
 msgstr ""
 
-#: standalone/drakbackup:2629
+#: standalone/drakbackup:2641
 #, c-format
 msgid ""
 "\n"
@@ -18161,17 +18165,17 @@ msgstr ""
 "\n"
 "- 儲存於該磁帶機裝置：%s"
 
-#: standalone/drakbackup:2630
+#: standalone/drakbackup:2642
 #, c-format
 msgid "\t\tErase=%s"
 msgstr "\t\t刪除=%s"
 
-#: standalone/drakbackup:2632
+#: standalone/drakbackup:2644
 #, c-format
 msgid "\tBackup directly to Tape\n"
 msgstr "\t將目錄備份到磁帶中\n"
 
-#: standalone/drakbackup:2634
+#: standalone/drakbackup:2646
 #, c-format
 msgid ""
 "\n"
@@ -18180,7 +18184,7 @@ msgstr ""
 "\n"
 "- 儲存 %s 於站台 - %s\n"
 
-#: standalone/drakbackup:2635
+#: standalone/drakbackup:2647
 #, c-format
 msgid ""
 "\t\t user name: %s\n"
@@ -18189,7 +18193,7 @@ msgstr ""
 "\t\t 使用者名稱: %s\n"
 "\t\t 位於路徑: %s \n"
 
-#: standalone/drakbackup:2636
+#: standalone/drakbackup:2648
 #, c-format
 msgid ""
 "\n"
@@ -18198,47 +18202,47 @@ msgstr ""
 "\n"
 "- 選項:\n"
 
-#: standalone/drakbackup:2637
+#: standalone/drakbackup:2649
 #, c-format
 msgid "\tDo not include System Files\n"
 msgstr "\t不要包含系統檔案\n"
 
-#: standalone/drakbackup:2639
+#: standalone/drakbackup:2651
 #, fuzzy, c-format
 msgid "\tBackups use %s and bzip2\n"
 msgstr "\t使用 tar 與 bzip2 進行備份\n"
 
-#: standalone/drakbackup:2640
+#: standalone/drakbackup:2652
 #, fuzzy, c-format
 msgid "\tBackups use %s and gzip\n"
 msgstr "\t使用 tar 與 gzip 進行備份\n"
 
-#: standalone/drakbackup:2641
+#: standalone/drakbackup:2653
 #, fuzzy, c-format
 msgid "\tBackups use %s only\n"
 msgstr "\t僅使用 tar 進行備份\n"
 
-#: standalone/drakbackup:2643
+#: standalone/drakbackup:2655
 #, c-format
 msgid "\tUse .backupignore files\n"
 msgstr "\t使用 .backupignore 檔案\n"
 
-#: standalone/drakbackup:2644
+#: standalone/drakbackup:2656
 #, c-format
 msgid "\tSend mail to %s\n"
 msgstr "\t傳送郵件給 %s\n"
 
-#: standalone/drakbackup:2645
+#: standalone/drakbackup:2657
 #, c-format
 msgid "\tSend mail from %s\n"
 msgstr ""
 
-#: standalone/drakbackup:2646
+#: standalone/drakbackup:2658
 #, c-format
 msgid "\tUsing SMTP server %s\n"
 msgstr "\t使用 SMTP 伺服器 %s\n"
 
-#: standalone/drakbackup:2648
+#: standalone/drakbackup:2660
 #, c-format
 msgid ""
 "\n"
@@ -18247,42 +18251,42 @@ msgstr ""
 "\n"
 "- Daemon (%s) 服務程式包含 :\n"
 
-#: standalone/drakbackup:2649
+#: standalone/drakbackup:2661
 #, c-format
 msgid "\t-Hard drive.\n"
 msgstr "\t-硬碟\n"
 
-#: standalone/drakbackup:2650
+#: standalone/drakbackup:2662
 #, c-format
 msgid "\t-CD-R.\n"
 msgstr "\t-光碟機\n"
 
-#: standalone/drakbackup:2651
+#: standalone/drakbackup:2663
 #, c-format
 msgid "\t-Tape \n"
 msgstr "\t-磁帶機\n"
 
-#: standalone/drakbackup:2652
+#: standalone/drakbackup:2664
 #, c-format
 msgid "\t-Network by FTP.\n"
 msgstr "\t-網路 (透過 FTP)\n"
 
-#: standalone/drakbackup:2653
+#: standalone/drakbackup:2665
 #, c-format
 msgid "\t-Network by SSH.\n"
 msgstr "\t網路 (透過 SSH)\n"
 
-#: standalone/drakbackup:2654
+#: standalone/drakbackup:2666
 #, c-format
 msgid "\t-Network by rsync.\n"
 msgstr "\t-網路 (透過 rsync)\n"
 
-#: standalone/drakbackup:2656
+#: standalone/drakbackup:2668
 #, c-format
 msgid "No configuration, please click Wizard or Advanced.\n"
 msgstr "尚未設定任何組態項目, 請點選精靈或者是進階模式建立之。\n"
 
-#: standalone/drakbackup:2661
+#: standalone/drakbackup:2673
 #, c-format
 msgid ""
 "List of data to restore:\n"
@@ -18291,27 +18295,27 @@ msgstr ""
 "要回存的資料清單:\n"
 "\n"
 
-#: standalone/drakbackup:2663
+#: standalone/drakbackup:2675
 #, c-format
 msgid "- Restore System Files.\n"
 msgstr "- 回存系統檔案。\n"
 
-#: standalone/drakbackup:2665 standalone/drakbackup:2675
+#: standalone/drakbackup:2677 standalone/drakbackup:2687
 #, c-format
 msgid "   - from date: %s %s\n"
 msgstr ""
 
-#: standalone/drakbackup:2668
+#: standalone/drakbackup:2680
 #, c-format
 msgid "- Restore User Files: \n"
 msgstr "- 回存使用者檔案：\n"
 
-#: standalone/drakbackup:2673
+#: standalone/drakbackup:2685
 #, c-format
 msgid "- Restore Other Files: \n"
 msgstr "- 回存其他檔案：\n"
 
-#: standalone/drakbackup:2852
+#: standalone/drakbackup:2864
 #, c-format
 msgid ""
 "List of data corrupted:\n"
@@ -18320,146 +18324,146 @@ msgstr ""
 "毀損的資料檔案清單:\n"
 "\n"
 
-#: standalone/drakbackup:2854
+#: standalone/drakbackup:2866
 #, c-format
 msgid "Please uncheck or remove it on next time."
 msgstr "下一次請取消或者是移除該項目。"
 
-#: standalone/drakbackup:2864
+#: standalone/drakbackup:2876
 #, c-format
 msgid "Backup files are corrupted"
 msgstr "備份的檔案已經毀損"
 
-#: standalone/drakbackup:2885
+#: standalone/drakbackup:2897
 #, c-format
 msgid "          All of your selected data have been          "
 msgstr "          您所選取的所有資料已經                       "
 
-#: standalone/drakbackup:2886
+#: standalone/drakbackup:2898
 #, c-format
 msgid "          Successfully Restored on %s       "
 msgstr "          成功回存到 %s                    "
 
-#: standalone/drakbackup:2987
+#: standalone/drakbackup:2999
 #, c-format
 msgid "/usr/bin/star not found, using tar..."
 msgstr ""
 
-#: standalone/drakbackup:3023
+#: standalone/drakbackup:3035
 #, c-format
 msgid "         Restore Configuration       "
 msgstr "         回存組態設定       "
 
-#: standalone/drakbackup:3051
+#: standalone/drakbackup:3063
 #, c-format
 msgid "OK to restore the other files."
 msgstr "選取 OK 來回存其他檔案。"
 
-#: standalone/drakbackup:3067
+#: standalone/drakbackup:3079
 #, c-format
 msgid "User list to restore (only the most recent date per user is important)"
 msgstr "回存的使用者清單 (只有回存最近使用者重要的檔案)"
 
-#: standalone/drakbackup:3132
+#: standalone/drakbackup:3144
 #, c-format
 msgid "Please choose the date to restore:"
 msgstr "請選取要回存的日期："
 
-#: standalone/drakbackup:3169
+#: standalone/drakbackup:3181
 #, c-format
 msgid "Restore from Hard Disk."
 msgstr "由硬碟回存。"
 
-#: standalone/drakbackup:3171
+#: standalone/drakbackup:3183
 #, c-format
 msgid "Enter the directory where backups are stored"
 msgstr "請輸入備份資料所儲存的目錄"
 
-#: standalone/drakbackup:3175
+#: standalone/drakbackup:3187
 #, c-format
 msgid "Directory with backups"
 msgstr "儲存備份資料的目錄"
 
-#: standalone/drakbackup:3229
+#: standalone/drakbackup:3241
 #, c-format
 msgid "Select another media to restore from"
 msgstr "請選取要用來回存資料的裝置來源"
 
-#: standalone/drakbackup:3231
+#: standalone/drakbackup:3243
 #, c-format
 msgid "Other Media"
 msgstr "其他裝置"
 
-#: standalone/drakbackup:3236
+#: standalone/drakbackup:3248
 #, c-format
 msgid "Restore system"
 msgstr "回存系統"
 
-#: standalone/drakbackup:3237
+#: standalone/drakbackup:3249
 #, c-format
 msgid "Restore Users"
 msgstr "回存使用者檔案"
 
-#: standalone/drakbackup:3238
+#: standalone/drakbackup:3250
 #, c-format
 msgid "Restore Other"
 msgstr "回存其他檔案"
 
-#: standalone/drakbackup:3240
+#: standalone/drakbackup:3252
 #, c-format
 msgid "Select path to restore (instead of /)"
 msgstr "選擇要回存的路徑名稱 (代替預設的 /)"
 
-#: standalone/drakbackup:3244 standalone/drakbackup:3525
+#: standalone/drakbackup:3256 standalone/drakbackup:3539
 #, c-format
 msgid "Path To Restore To"
 msgstr "回存的路徑"
 
-#: standalone/drakbackup:3247
+#: standalone/drakbackup:3259
 #, c-format
 msgid "Do new backup before restore (only for incremental backups.)"
 msgstr "在回存前進行新的備份動作 (只能夠用在遞增式備份時.)"
 
-#: standalone/drakbackup:3249
+#: standalone/drakbackup:3261
 #, c-format
 msgid "Remove user directories before restore."
 msgstr "在回存資料時先刪除使用者的相關目錄"
 
-#: standalone/drakbackup:3333
+#: standalone/drakbackup:3345
 #, c-format
 msgid "Filename text substring to search for (empty string matches all):"
 msgstr ""
 
-#: standalone/drakbackup:3336
+#: standalone/drakbackup:3348
 #, c-format
 msgid "Search Backups"
 msgstr "搜尋備份"
 
-#: standalone/drakbackup:3354
+#: standalone/drakbackup:3367
 #, c-format
 msgid "No matches found..."
 msgstr "找不到符合的..."
 
-#: standalone/drakbackup:3358
+#: standalone/drakbackup:3371
 #, c-format
 msgid "Restore Selected"
 msgstr "回存選取項目"
 
-#: standalone/drakbackup:3493
+#: standalone/drakbackup:3507
 #, c-format
 msgid ""
 "Click date/time to see backup files.\n"
 "Ctrl-Click files to select multiple files."
 msgstr ""
 
-#: standalone/drakbackup:3499
+#: standalone/drakbackup:3513
 #, c-format
 msgid ""
 "Restore Selected\n"
 "Catalog Entry"
 msgstr ""
 
-#: standalone/drakbackup:3508
+#: standalone/drakbackup:3522
 #, c-format
 msgid ""
 "Restore Selected\n"
@@ -18468,17 +18472,17 @@ msgstr ""
 "回存選取項目\n"
 "檔案"
 
-#: standalone/drakbackup:3584
+#: standalone/drakbackup:3599
 #, c-format
 msgid "Backup files not found at %s."
 msgstr "備份檔案找不到 - %s。"
 
-#: standalone/drakbackup:3597
+#: standalone/drakbackup:3612
 #, c-format
 msgid "Restore From CD"
 msgstr "使用光碟片回存"
 
-#: standalone/drakbackup:3597
+#: standalone/drakbackup:3612
 #, c-format
 msgid ""
 "Insert the CD with volume label %s\n"
@@ -18487,17 +18491,17 @@ msgstr ""
 "請置入標籤名稱為 %s 的 CD 片到光碟機內\n"
 "(掛載點為 /mnt/cdrom)"
 
-#: standalone/drakbackup:3599
+#: standalone/drakbackup:3614
 #, c-format
 msgid "Not the correct CD label. Disk is labelled %s."
 msgstr "不正確的 CD 片標籤, 磁碟標籤名稱為 %s。"
 
-#: standalone/drakbackup:3609
+#: standalone/drakbackup:3624
 #, c-format
 msgid "Restore From Tape"
 msgstr "使用磁帶回存"
 
-#: standalone/drakbackup:3609
+#: standalone/drakbackup:3624
 #, c-format
 msgid ""
 "Insert the tape with volume label %s\n"
@@ -18506,207 +18510,207 @@ msgstr ""
 "請置入標籤名稱為 %s 的磁帶\n"
 "到 %s 磁帶機內"
 
-#: standalone/drakbackup:3611
+#: standalone/drakbackup:3626
 #, c-format
 msgid "Not the correct tape label. Tape is labelled %s."
 msgstr "不正確的磁帶標籤, 磁帶標籤為 %s。"
 
-#: standalone/drakbackup:3622
+#: standalone/drakbackup:3637
 #, c-format
 msgid "Restore Via Network"
 msgstr "使用網路回存檔案"
 
-#: standalone/drakbackup:3622
+#: standalone/drakbackup:3637
 #, c-format
 msgid "Restore Via Network Protocol: %s"
 msgstr "網路回存使用的協定：%s"
 
-#: standalone/drakbackup:3623
+#: standalone/drakbackup:3638
 #, c-format
 msgid "Host Name"
 msgstr "主機名稱"
 
-#: standalone/drakbackup:3624
+#: standalone/drakbackup:3639
 #, c-format
 msgid "Host Path or Module"
 msgstr "主機路徑或是模組名稱"
 
-#: standalone/drakbackup:3631
+#: standalone/drakbackup:3646
 #, c-format
 msgid "Password required"
 msgstr "需要輸入密碼"
 
-#: standalone/drakbackup:3637
+#: standalone/drakbackup:3652
 #, c-format
 msgid "Username required"
 msgstr "需要輸入帳號名稱"
 
-#: standalone/drakbackup:3640
+#: standalone/drakbackup:3655
 #, c-format
 msgid "Hostname required"
 msgstr "需要輸入主機名稱"
 
-#: standalone/drakbackup:3645
+#: standalone/drakbackup:3660
 #, c-format
 msgid "Path or Module required"
 msgstr "需要輸入路徑或是模組名稱"
 
-#: standalone/drakbackup:3657
+#: standalone/drakbackup:3672
 #, c-format
 msgid "Files Restored..."
 msgstr "要回存的檔案..."
 
-#: standalone/drakbackup:3660
+#: standalone/drakbackup:3675
 #, c-format
 msgid "Restore Failed..."
 msgstr "回存失敗..."
 
-#: standalone/drakbackup:3688
+#: standalone/drakbackup:3703
 #, c-format
 msgid "%s not retrieved..."
 msgstr "%s 無法取得..."
 
-#: standalone/drakbackup:3912 standalone/drakbackup:3981
+#: standalone/drakbackup:3929 standalone/drakbackup:3998
 #, c-format
 msgid "Search for files to restore"
 msgstr "搜尋檔案來回存"
 
-#: standalone/drakbackup:3916
+#: standalone/drakbackup:3933
 #, c-format
 msgid "Restore all backups"
 msgstr "回存所有備份資料"
 
-#: standalone/drakbackup:3924
+#: standalone/drakbackup:3941
 #, c-format
 msgid "Custom Restore"
 msgstr "自訂回存方式"
 
-#: standalone/drakbackup:3928 standalone/drakbackup:3977
+#: standalone/drakbackup:3945 standalone/drakbackup:3994
 #, c-format
 msgid "Restore From Catalog"
 msgstr "使用型錄回存"
 
-#: standalone/drakbackup:3949
+#: standalone/drakbackup:3966
 #, c-format
 msgid "Unable to find backups to restore...\n"
 msgstr "無法找到備份以回存...\n"
 
-#: standalone/drakbackup:3950
+#: standalone/drakbackup:3967
 #, c-format
 msgid "Verify that %s is the correct path"
 msgstr "請確認 %s 是正確的路徑"
 
-#: standalone/drakbackup:3951
+#: standalone/drakbackup:3968
 #, c-format
 msgid " and the CD is in the drive"
 msgstr ""
 
-#: standalone/drakbackup:3953
+#: standalone/drakbackup:3970
 #, c-format
 msgid "Backups on unmountable media - Use Catalog to restore"
 msgstr ""
 
-#: standalone/drakbackup:3969
+#: standalone/drakbackup:3986
 #, c-format
 msgid "CD in place - continue."
 msgstr "CD 片就緒 - 繼續執行。"
 
-#: standalone/drakbackup:3974
+#: standalone/drakbackup:3991
 #, c-format
 msgid "Browse to new restore repository."
 msgstr ""
 
-#: standalone/drakbackup:3975
+#: standalone/drakbackup:3992
 #, c-format
 msgid "Directory To Restore From"
 msgstr "用來回存的目錄"
 
-#: standalone/drakbackup:4011
+#: standalone/drakbackup:4028
 #, c-format
 msgid "Restore Progress"
 msgstr "回存進度"
 
-#: standalone/drakbackup:4119
+#: standalone/drakbackup:4136
 #, c-format
 msgid "Build Backup"
 msgstr "建立備份"
 
-#: standalone/drakbackup:4152 standalone/drakbackup:4449
+#: standalone/drakbackup:4169 standalone/drakbackup:4466
 #, c-format
 msgid "Restore"
 msgstr "回存"
 
-#: standalone/drakbackup:4244
+#: standalone/drakbackup:4261
 #, c-format
 msgid "Please select data to restore..."
 msgstr "請選取要回存的資料..."
 
-#: standalone/drakbackup:4284
+#: standalone/drakbackup:4301
 #, c-format
 msgid "Backup system files"
 msgstr "備份系統檔案"
 
-#: standalone/drakbackup:4287
+#: standalone/drakbackup:4304
 #, c-format
 msgid "Backup user files"
 msgstr "備份使用者檔案"
 
-#: standalone/drakbackup:4290
+#: standalone/drakbackup:4307
 #, c-format
 msgid "Backup other files"
 msgstr "備份其他檔案"
 
-#: standalone/drakbackup:4293 standalone/drakbackup:4327
+#: standalone/drakbackup:4310 standalone/drakbackup:4344
 #, c-format
 msgid "Total Progress"
 msgstr "全部進度"
 
-#: standalone/drakbackup:4319
+#: standalone/drakbackup:4336
 #, c-format
 msgid "Sending files by FTP"
 msgstr "經由 FTP 傳送檔案"
 
-#: standalone/drakbackup:4322
+#: standalone/drakbackup:4339
 #, c-format
 msgid "Sending files..."
 msgstr "正在送出檔案..."
 
-#: standalone/drakbackup:4392
+#: standalone/drakbackup:4409
 #, c-format
 msgid "Backup Now from configuration file"
 msgstr "依據目前組態設定開始備份"
 
-#: standalone/drakbackup:4397
+#: standalone/drakbackup:4414
 #, c-format
 msgid "View Backup Configuration."
 msgstr "檢視備份組態設定"
 
-#: standalone/drakbackup:4423
+#: standalone/drakbackup:4440
 #, c-format
 msgid "Wizard Configuration"
 msgstr "精靈設定模式"
 
-#: standalone/drakbackup:4428
+#: standalone/drakbackup:4445
 #, c-format
 msgid "Advanced Configuration"
 msgstr "進階設定"
 
-#: standalone/drakbackup:4433
+#: standalone/drakbackup:4450
 #, c-format
 msgid "View Configuration"
 msgstr "檢視組態設定"
 
-#: standalone/drakbackup:4437
+#: standalone/drakbackup:4454
 #, c-format
 msgid "View Last Log"
 msgstr "查看最新紀錄"
 
-#: standalone/drakbackup:4442
+#: standalone/drakbackup:4459
 #, c-format
 msgid "Backup Now"
 msgstr "立即備份"
 
-#: standalone/drakbackup:4446
+#: standalone/drakbackup:4463
 #, c-format
 msgid ""
 "No configuration file found \n"
@@ -18715,17 +18719,17 @@ msgstr ""
 "尚未產生組態設定檔案, 請點選\n"
 "精靈或者是進階模式建立之。"
 
-#: standalone/drakbackup:4484
+#: standalone/drakbackup:4501
 #, fuzzy, c-format
 msgid "Load profile"
 msgstr "本地端檔案"
 
-#: standalone/drakbackup:4493
+#: standalone/drakbackup:4510
 #, fuzzy, c-format
 msgid "Save profile as..."
 msgstr "另存新檔..."
 
-#: standalone/drakbackup:4515 standalone/drakbackup:4518
+#: standalone/drakbackup:4532 standalone/drakbackup:4535
 #, c-format
 msgid "Drakbackup"
 msgstr "Drakbackup"
@@ -18736,9 +18740,8 @@ msgid "No bootloader found, creating a new configuration"
 msgstr ""
 
 #: standalone/drakboot:84 standalone/harddrake2:190 standalone/harddrake2:191
-#: standalone/harddrake2:192 standalone/logdrake:69
-#: standalone/printerdrake:150 standalone/printerdrake:151
-#: standalone/printerdrake:152
+#: standalone/logdrake:69 standalone/printerdrake:150
+#: standalone/printerdrake:151 standalone/printerdrake:152
 #, c-format
 msgid "/_File"
 msgstr "/檔案 (_F)"
@@ -18748,7 +18751,7 @@ msgstr "/檔案 (_F)"
 msgid "/File/_Quit"
 msgstr "/檔案 (F)/結束 (_Q)"
 
-#: standalone/drakboot:85 standalone/harddrake2:192 standalone/logdrake:75
+#: standalone/drakboot:85 standalone/harddrake2:191 standalone/logdrake:75
 #: standalone/printerdrake:152
 #, c-format
 msgid "<control>Q"
@@ -19004,7 +19007,7 @@ msgstr "時區 - DakClock"
 msgid "GMT - DrakClock"
 msgstr "GMT - DrakClock"
 
-#: standalone/drakclock:47
+#: standalone/drakclock:47 standalone/finish-install:57
 #, c-format
 msgid "Is your hardware clock set to GMT?"
 msgstr "硬體時鐘設定為 GMT 時間嗎?"
@@ -19565,7 +19568,7 @@ msgstr ""
 msgid "About"
 msgstr "關於"
 
-#: standalone/drakfont:494 standalone/drakfont:686 standalone/drakfont:724
+#: standalone/drakfont:494 standalone/drakfont:718
 #, c-format
 msgid "Uninstall"
 msgstr "移除"
@@ -19578,18 +19581,10 @@ msgstr "匯入"
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
 #: standalone/drakfont:513
 #, c-format
-msgid ""
-"Copyright (C) 2001-2002 by Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (original version)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
+msgid "Copyright (C) 2001-2006 by Mandriva"
 msgstr ""
 
-#: standalone/drakfont:522
+#: standalone/drakfont:515
 #, c-format
 msgid ""
 "This program is free software; you can redistribute it and/or modify\n"
@@ -19608,18 +19603,21 @@ msgid ""
 " along with this program; if not, write to the Free Software\n"
 " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
 msgstr ""
-"本程式是自由軟體，您可以遵照自由軟體基金會 (Free Software Foundation) 出版的\n" 
+"本程式是自由軟體，您可以遵照自由軟體基金會 (Free Software Foundation) 出版"
+"的\n"
 "GNU 通用公共許可證條款 (GNU General Public License) 第二版來修改和重新發佈\n"
 "這一程式，或者自由選擇使用任何更新的版本。\n"
 "\n"
-"發佈這一程式的目的是希望它有用，但沒有任何擔保。甚至沒有適合特定目的而隱含的擔保。\n"
+"發佈這一程式的目的是希望它有用，但沒有任何擔保。甚至沒有適合特定目的而隱含的"
+"擔保。\n"
 "更詳細的情況請參閱 GNU 通用公共許可證。\n"
 "\n"
-"您應該已經和程式一起收到一份 GNU 通用公共許可證的副本。如果還沒有，寫信給：Free\n"
+"您應該已經和程式一起收到一份 GNU 通用公共許可證的副本。如果還沒有，寫信給："
+"Free\n"
 "Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, \n"
-"MA 02111-1307, USA." 
+"MA 02111-1307, USA."
 
-#: standalone/drakfont:538
+#: standalone/drakfont:531
 #, c-format
 msgid ""
 "Thanks:\n"
@@ -19637,112 +19635,102 @@ msgid ""
 "             Convert ttf font files to afm and pfb fonts\n"
 msgstr ""
 
-#: standalone/drakfont:557
+#: standalone/drakfont:550
 #, c-format
 msgid "Choose the applications that will support the fonts:"
 msgstr "選擇能夠使用該字體的應用程式："
 
-#: standalone/drakfont:568
+#: standalone/drakfont:561
 #, c-format
 msgid "Ghostscript"
 msgstr "GhostScript"
 
-#: standalone/drakfont:569
+#: standalone/drakfont:562
 #, c-format
 msgid "StarOffice"
 msgstr "StarOffice"
 
-#: standalone/drakfont:570
+#: standalone/drakfont:563
 #, c-format
 msgid "Abiword"
 msgstr "Abiword"
 
-#: standalone/drakfont:571
+#: standalone/drakfont:564
 #, c-format
 msgid "Generic Printers"
 msgstr "一般印表機"
 
-#: standalone/drakfont:585
+#: standalone/drakfont:578
 #, c-format
 msgid "Select the font file or directory and click on 'Add'"
 msgstr "選取字型檔案或者是所在目錄, 點選 '加入'"
 
-#: standalone/drakfont:586
+#: standalone/drakfont:579
 #, c-format
 msgid "File Selection"
 msgstr "檔案選取"
 
-#: standalone/drakfont:590
+#: standalone/drakfont:583
 #, c-format
 msgid "Fonts"
 msgstr "字形"
 
-#: standalone/drakfont:653
+#: standalone/drakfont:646
 #, c-format
 msgid "Import fonts"
 msgstr "匯入字型"
 
-#: standalone/drakfont:658
+#: standalone/drakfont:651
 #, c-format
 msgid "Install fonts"
 msgstr "安裝字型"
 
-#: standalone/drakfont:691
+#: standalone/drakfont:681
 #, c-format
-msgid "click here if you are sure."
-msgstr "確定的話請點選這裡"
-
-#: standalone/drakfont:693
-#, c-format
-msgid "here if no."
-msgstr "不確定點選這裡"
+msgid "Are you sure you want to uninstall the following fonts?"
+msgstr ""
 
-#: standalone/drakfont:732
+#: standalone/drakfont:726
 #, c-format
 msgid "Unselected All"
 msgstr "取消選取所有項目"
 
-#: standalone/drakfont:735
+#: standalone/drakfont:729
 #, c-format
 msgid "Selected All"
 msgstr "選取所有項目"
 
-#: standalone/drakfont:738
-#, c-format
-msgid "Remove List"
-msgstr "移除清單"
-
-#: standalone/drakfont:749 standalone/drakfont:768
+#: standalone/drakfont:743 standalone/drakfont:762
 #, c-format
 msgid "Importing fonts"
 msgstr "正在匯入字型"
 
-#: standalone/drakfont:753 standalone/drakfont:773
+#: standalone/drakfont:747 standalone/drakfont:767
 #, c-format
 msgid "Initial tests"
 msgstr "初始測試"
 
-#: standalone/drakfont:754
+#: standalone/drakfont:748
 #, c-format
 msgid "Copy fonts on your system"
 msgstr "複製字體至系統"
 
-#: standalone/drakfont:755
+#: standalone/drakfont:749
 #, c-format
 msgid "Install & convert Fonts"
 msgstr "安裝與轉換字體"
 
-#: standalone/drakfont:756
+#: standalone/drakfont:750
 #, c-format
 msgid "Post Install"
 msgstr "後續安裝設定"
 
-#: standalone/drakfont:774
+#: standalone/drakfont:768
 #, c-format
 msgid "Remove fonts on your system"
 msgstr "由您的系統移除該字體檔案"
 
-#: standalone/drakfont:775
+#: standalone/drakfont:769
 #, c-format
 msgid "Post Uninstall"
 msgstr "後續反安裝設定"
@@ -21110,7 +21098,7 @@ msgstr "使用者資訊"
 msgid "User name:"
 msgstr "用戶名稱："
 
-#: standalone/draksambashare:933 standalone/harddrake2:601
+#: standalone/draksambashare:933
 #, c-format
 msgid "Password:"
 msgstr "密碼："
@@ -21270,7 +21258,7 @@ msgid ""
 "maximum"
 msgstr ""
 
-#: standalone/draksec:156 standalone/harddrake2:208
+#: standalone/draksec:156 standalone/harddrake2:207
 #, c-format
 msgid ""
 "Description of the fields:\n"
@@ -21362,8 +21350,8 @@ msgstr ""
 "\n"
 "\n"
 "\n"
-"請注意：若您使用的是 ISA PnP 音效卡的話，您需要使用 alsaconf 或 sndconfig "
-"程式來設定。請在終端機中輸入 \"alsaconf\" 或 \"sndconfig\" 即可。"
+"請注意：若您使用的是 ISA PnP 音效卡的話，您需要使用 alsaconf 或 sndconfig 程"
+"式來設定。請在終端機中輸入 \"alsaconf\" 或 \"sndconfig\" 即可。"
 
 #: standalone/draksplash:30
 #, c-format
@@ -21390,8 +21378,7 @@ msgstr "文字區域的高度"
 msgid ""
 "the progress bar x coordinate\n"
 "of its upper left corner"
-msgstr ""
-"進度列左上角的 X 座標"
+msgstr "進度列左上角的 X 座標"
 
 #: standalone/draksplash:35
 #, c-format
@@ -21573,7 +21560,7 @@ msgstr ""
 msgid "Autodetection"
 msgstr "自動偵測"
 
-#: standalone/drakups:99 standalone/harddrake2:376
+#: standalone/drakups:99 standalone/harddrake2:375
 #, c-format
 msgid "Detection in progress"
 msgstr "正在偵測中"
@@ -23598,7 +23585,7 @@ msgstr "圖形桌面環境與這隻滑鼠間所使用的通訊協定"
 
 #: standalone/harddrake2:128 standalone/harddrake2:137
 #: standalone/harddrake2:144 standalone/harddrake2:152
-#: standalone/harddrake2:342
+#: standalone/harddrake2:341
 #, c-format
 msgid "Identification"
 msgstr "辨別身份"
@@ -23646,7 +23633,7 @@ msgstr "功能"
 msgid "/_Options"
 msgstr "/選項 (_O)"
 
-#: standalone/harddrake2:177 standalone/harddrake2:203 standalone/logdrake:78
+#: standalone/harddrake2:177 standalone/harddrake2:202 standalone/logdrake:78
 #: standalone/printerdrake:172 standalone/printerdrake:174
 #: standalone/printerdrake:177 standalone/printerdrake:179
 #, c-format
@@ -23673,51 +23660,45 @@ msgstr "/自動偵測 Jaz 裝置 (_J)"
 msgid "/Autodetect parallel _zip drives"
 msgstr "/自動偵測平行埠的 ZIP 磁碟 (_Z)"
 
-#: standalone/harddrake2:191
-#, c-format
-msgid "/_Upload the hardware list"
-msgstr "/上傳硬體清單 (_U)"
-
-#: standalone/harddrake2:192 standalone/printerdrake:152
+#: standalone/harddrake2:191 standalone/printerdrake:152
 #, c-format
 msgid "/_Quit"
 msgstr "/結束 (_Q)"
 
-#: standalone/harddrake2:205
+#: standalone/harddrake2:204
 #, c-format
 msgid "/_Fields description"
 msgstr "/欄位的描述資訊 (_F)"
 
-#: standalone/harddrake2:207
+#: standalone/harddrake2:206
 #, c-format
 msgid "Harddrake help"
 msgstr "Harddrake 說明"
 
-#: standalone/harddrake2:216
+#: standalone/harddrake2:215
 #, c-format
 msgid ""
 "Once you've selected a device, you'll be able to see the device information "
 "in fields displayed on the right frame (\"Information\")"
-msgstr ""
-"只要您選擇了一項裝置，您就能在右方的欄位 (\"資訊\") 中看到該裝置的資訊"
+msgstr "只要您選擇了一項裝置，您就能在右方的欄位 (\"資訊\") 中看到該裝置的資訊"
 
-#: standalone/harddrake2:222 standalone/printerdrake:177
+#: standalone/harddrake2:221 standalone/printerdrake:177
 #, c-format
 msgid "/_Report Bug"
 msgstr "/報告錯誤 (_R)"
 
-#: standalone/harddrake2:224 standalone/printerdrake:179
+#: standalone/harddrake2:223 standalone/printerdrake:179
 #, c-format
 msgid "/_About..."
 msgstr "/關於 (_A)"
 
-#: standalone/harddrake2:225
+#: standalone/harddrake2:224
 #, c-format
 msgid "About Harddrake"
 msgstr "關於 Harddrake"
 
 #. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/harddrake2:227
+#: standalone/harddrake2:226
 #, fuzzy, c-format
 msgid ""
 "This is HardDrake, a %s hardware configuration tool.\n"
@@ -23732,87 +23713,72 @@ msgstr ""
 "tvignaud@mandriva.com&gt;\n"
 "\n"
 
-#: standalone/harddrake2:243
+#: standalone/harddrake2:242
 #, c-format
 msgid "Harddrake2"
 msgstr "HardDrake2"
 
-#: standalone/harddrake2:273
+#: standalone/harddrake2:272
 #, c-format
 msgid "Detected hardware"
 msgstr "已偵測到的硬體"
 
-#: standalone/harddrake2:278
+#: standalone/harddrake2:277
 #, c-format
 msgid "Configure module"
 msgstr "設定模組"
 
-#: standalone/harddrake2:285
+#: standalone/harddrake2:284
 #, c-format
 msgid "Run config tool"
 msgstr "執行設定程式"
 
-#: standalone/harddrake2:309
+#: standalone/harddrake2:308
 #, c-format
 msgid ""
 "Click on a device in the left tree in order to display its information here."
 msgstr "在左側的樹狀結構中點選一個裝置以在此顯示它的資訊。"
 
-#: standalone/harddrake2:330 standalone/printerdrake:306
+#: standalone/harddrake2:329 standalone/printerdrake:306
 #: standalone/printerdrake:320
 #, c-format
 msgid "Unknown"
 msgstr "未知的"
 
-#: standalone/harddrake2:350
+#: standalone/harddrake2:349
 #, c-format
 msgid "Misc"
 msgstr "其它"
 
-#: standalone/harddrake2:428
+#: standalone/harddrake2:427
 #, c-format
 msgid "secondary"
 msgstr "次要的"
 
-#: standalone/harddrake2:428
+#: standalone/harddrake2:427
 #, c-format
 msgid "primary"
 msgstr "主要的"
 
-#: standalone/harddrake2:432
+#: standalone/harddrake2:431
 #, c-format
 msgid "burner"
 msgstr "燒錄器"
 
-#: standalone/harddrake2:432
+#: standalone/harddrake2:431
 #, c-format
 msgid "DVD"
 msgstr "DVD"
 
-#: standalone/harddrake2:512
+#: standalone/harddrake2:511
 #, c-format
 msgid ""
 "The following devices needs proprietary drivers or firmwares in order to "
 "operate smoothly. The appropriate packages can be retrieved from the "
 "Mandriva Club. Do you want to subscribe to the Mandriva Club?"
 msgstr ""
-"以下裝置需要私有驅動程式或軔體才能順利運作。適當的套件可以從 Mandriva Club 取得。"
-"您想要加入 Mandriva Club 嗎？"
-
-#: standalone/harddrake2:595 standalone/harddrake2:598
-#, c-format
-msgid "Upload the hardware list"
-msgstr "上傳硬體清單"
-
-#: standalone/harddrake2:600
-#, c-format
-msgid "Account:"
-msgstr "帳號："
-
-#: standalone/harddrake2:602
-#, c-format
-msgid "Hostname:"
-msgstr "主機名稱："
+"以下裝置需要私有驅動程式或軔體才能順利運作。適當的套件可以從 Mandriva Club 取"
+"得。您想要加入 Mandriva Club 嗎？"
 
 #: standalone/keyboarddrake:45
 #, c-format
@@ -23910,32 +23876,28 @@ msgstr "/說明 (H)/關於 (_A)"
 msgid ""
 "_:this is the auth.log log file\n"
 "Authentication"
-msgstr ""
-"認證紀錄檔 (auth.log)"
+msgstr "認證紀錄檔 (auth.log)"
 
 #: standalone/logdrake:109
 #, c-format
 msgid ""
 "_:this is the user.log log file\n"
 "User"
-msgstr ""
-"使用者紀錄檔 (user.log)"
+msgstr "使用者紀錄檔 (user.log)"
 
 #: standalone/logdrake:110
 #, c-format
 msgid ""
 "_:this is the /var/log/messages log file\n"
 "Messages"
-msgstr ""
-"訊息紀錄檔 (Messages)"
+msgstr "訊息紀錄檔 (Messages)"
 
 #: standalone/logdrake:111
 #, c-format
 msgid ""
 "_:this is the /var/log/syslog log file\n"
 "Syslog"
-msgstr ""
-"系統紀錄檔 (Syslog)"
+msgstr "系統紀錄檔 (Syslog)"
 
 #: standalone/logdrake:115
 #, c-format
@@ -24905,15 +24867,15 @@ msgid ""
 "Here you can choose whether the scanners connected to this machine should be "
 "accessible by remote machines and by which remote machines."
 msgstr ""
-"您可以在這裡選擇連接到這部電腦的掃描器是否允許遠端電腦使用，以及允許那些電腦使用。"
+"您可以在這裡選擇連接到這部電腦的掃描器是否允許遠端電腦使用，以及允許那些電腦"
+"使用。"
 
 #: standalone/scannerdrake:600
 #, c-format
 msgid ""
 "You can also decide here whether scanners on remote machines should be made "
 "available on this machine."
-msgstr ""
-"您也可以決定是否要從這部電腦使用遠端電腦的掃描器。"
+msgstr "您也可以決定是否要從這部電腦使用遠端電腦的掃描器。"
 
 #: standalone/scannerdrake:603
 #, c-format
@@ -24946,8 +24908,7 @@ msgstr "本地端掃描器分享"
 msgid ""
 "These are the machines on which the locally connected scanner(s) should be "
 "available:"
-msgstr ""
-"以下電腦要可以使用連接到本機的掃描器："
+msgstr "以下電腦要可以使用連接到本機的掃描器："
 
 #: standalone/scannerdrake:661 standalone/scannerdrake:811
 #, c-format
@@ -25013,27 +24974,27 @@ msgstr ""
 msgid "Your scanner(s) will not be available on the network."
 msgstr "您的掃描器將無法從網路上使用。"
 
-#: standalone/service_harddrake:105
+#: standalone/service_harddrake:113
 #, c-format
 msgid "Some devices in the \"%s\" hardware class were removed:\n"
 msgstr "位於 \"%s\" 的硬體類別項目已經移除：\n"
 
-#: standalone/service_harddrake:106
+#: standalone/service_harddrake:114
 #, c-format
 msgid "- %s was removed\n"
 msgstr "- %s 已經移除\n"
 
-#: standalone/service_harddrake:109
+#: standalone/service_harddrake:117
 #, c-format
 msgid "Some devices were added: %s\n"
 msgstr "新增了一些裝置：%s\n"
 
-#: standalone/service_harddrake:110
+#: standalone/service_harddrake:118
 #, c-format
 msgid "- %s was added\n"
 msgstr "- %s 已經加入\n"
 
-#: standalone/service_harddrake:209
+#: standalone/service_harddrake:235
 #, c-format
 msgid "Hardware probing in progress"
 msgstr "硬體偵測正在進行中"
@@ -25192,6 +25153,27 @@ msgstr ""
 msgid "Installation failed"
 msgstr "安裝失敗"
 
+#~ msgid "click here if you are sure."
+#~ msgstr "確定的話請點選這裡"
+
+#~ msgid "here if no."
+#~ msgstr "不確定點選這裡"
+
+#~ msgid "Remove List"
+#~ msgstr "移除清單"
+
+#~ msgid "/_Upload the hardware list"
+#~ msgstr "/上傳硬體清單 (_U)"
+
+#~ msgid "Upload the hardware list"
+#~ msgstr "上傳硬體清單"
+
+#~ msgid "Account:"
+#~ msgstr "帳號："
+
+#~ msgid "Hostname:"
+#~ msgstr "主機名稱："
+
 #~ msgid "Cancel setup"
 #~ msgstr "取消設定"
 
-- 
cgit v1.2.1