From c05bbc47512c4fffb724bcc7a12a7cdd74e1956c Mon Sep 17 00:00:00 2001 From: Pablo Saratxaga Date: Thu, 18 Sep 2003 13:54:15 +0000 Subject: updated pot file --- perl-install/share/po/ta.po | 597 +++++++++++++++++++++++++------------------- 1 file changed, 338 insertions(+), 259 deletions(-) (limited to 'perl-install/share/po/ta.po') diff --git a/perl-install/share/po/ta.po b/perl-install/share/po/ta.po index 992510a53..e1aaa85c7 100644 --- a/perl-install/share/po/ta.po +++ b/perl-install/share/po/ta.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: DrakX 1.0\n" -"POT-Creation-Date: 2003-09-09 17:07+0200\n" +"POT-Creation-Date: 2003-09-16 13:45+0200\n" "PO-Revision-Date: 2002-09-06 00:35+0800\n" "Last-Translator: prabu anand \n" "Language-Team: Tamil \n" @@ -180,7 +180,7 @@ msgstr "வலையமைப்பு அட்ைட" msgid "If set, send the mail report to this email address else send it to root" msgstr "" -#: ../../standalone/drakconnect:1 +#: ../../modules/interactive.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Parameters" msgstr "வரைமுறை" @@ -482,6 +482,11 @@ msgstr "பாட்ைட" msgid "Iraq" msgstr "ஈராக்" +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "connecting to %s ..." +msgstr "பக்சிலாவோடு இணைகிறது" + #: ../../standalone/drakgw:1 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" @@ -525,6 +530,16 @@ msgstr "பொதி மேலாளர்" msgid "Default desktop" msgstr "மேசை" +#: ../../standalone/drakbug:1 +#, c-format +msgid "" +"To submit a bug report, click on the button report.\n" +"This will open a web browser window on %s\n" +" where you'll find a form to fill in. The information displayed above will " +"be \n" +"transferred to that server." +msgstr "" + #: ../../lang.pm:1 #, c-format msgid "Venezuela" @@ -1102,6 +1117,36 @@ msgstr "" "ஏனைய பகுதிகளில் பயன்படுத்தப்படும் வரைமுறை\n" "No D-Channel (குத்தகை இணைப்புகள்)" +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - /etc/xinetd.d/tftp:\n" +" \tdrakTermServ will configure this file to work in conjunction with " +"the images created\n" +" \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " +"the boot image to \n" +" \teach diskless client.\n" +"\n" +" \tA typical tftp configuration file looks like:\n" +" \t\t\n" +" \tservice tftp\n" +"\t\t\t{\n" +" disable = no\n" +" socket_type = dgram\n" +" protocol = udp\n" +" wait = yes\n" +" user = root\n" +" server = /usr/sbin/in.tftpd\n" +" server_args = -s /var/lib/tftpboot\n" +" \t}\n" +" \t\t\n" +" \tThe changes here from the default installation are changing the " +"disable flag to\n" +" \t'no' and changing the directory path to /var/lib/tftpboot, where " +"mkinitrd-net\n" +" \tputs its images." +msgstr "" + #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be a number!" @@ -1725,16 +1770,16 @@ msgstr "" msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "Use the %c and %c keys for selecting which entry is highlighted" -#: ../../standalone/drakperm:1 -#, c-format -msgid "Enable \"%s\" to execute the file" -msgstr "" - #: ../../mouse.pm:1 #, c-format msgid "Generic 2 Button Mouse" msgstr "பொதுவான 2 பொத்தான் எலி" +#: ../../standalone/drakperm:1 +#, c-format +msgid "Enable \"%s\" to execute the file" +msgstr "" + #: ../../lvm.pm:1 #, c-format msgid "Remove the logical volumes first\n" @@ -2849,6 +2894,23 @@ msgstr "மெகா பைட்டில் மூல வகிர் அள msgid "This is a mandatory package, it can't be unselected" msgstr "இது கட்டாய பொதி. இதனை நீக்க முடியாது" +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - Create etherboot floppies/CDs:\n" +" \tThe diskless client machines need either ROM images on the NIC, or " +"a boot floppy\n" +" \tor CD to initate the boot sequence. drakTermServ will help " +"generate these\n" +" \timages, based on the NIC in the client machine.\n" +" \t\t\n" +" \tA basic example of creating a boot floppy for a 3Com 3c509 " +"manually:\n" +" \t\t\n" +" \tcat /usr/lib/etherboot/boot1a.bin \\\n" +" \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0" +msgstr "" + #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot ISO image is %s" @@ -3228,22 +3290,6 @@ msgstr "கோப்புகளை மறைக்கவும்" msgid "Auto-detect printers connected to this machine" msgstr "" -#: ../../standalone/drakxtv:1 -#, c-format -msgid "" -"XawTV isn't installed!\n" -"\n" -"\n" -"If you do have a TV card but DrakX has neither detected it (no bttv nor " -"saa7134\n" -"module in \"/etc/modules\") nor installed xawtv, please send the\n" -"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n" -"with subject \"undetected TV card\".\n" -"\n" -"\n" -"You can install it by typing \"urpmi xawtv\" as root, in a console." -msgstr "" - #: ../../any.pm:1 #, c-format msgid "Sorry, no floppy drive available" @@ -3799,6 +3845,15 @@ msgstr "" msgid "Restore From Tape" msgstr "தட்டின் வகிர் அமைப்புகளை பழைய நிலைக்கு கொண்டு வாருங்கள்" +#: ../../standalone/drakbug:1 +#, c-format +msgid "" +"To submit a bug report, click the report button, which will open your " +"default browser\n" +"to Anthill where you will be able to upload the above information as a bug " +"report." +msgstr "" + #: ../../network/netconnect.pm:1 #, c-format msgid "Choose the profile to configure" @@ -3935,7 +3990,7 @@ msgstr "" msgid "Need hostname, username and password!" msgstr "" -#: ../../network/adsl.pm:1 +#: ../../network/tools.pm:1 #, fuzzy, c-format msgid "Insert floppy" msgstr " %s ல் நெகிழ்வட்ைட உள்ளிடவும்" @@ -4071,10 +4126,17 @@ msgstr "வலையமைப்பு அட்ைட ஏற்கனவே வ msgid "Couldn't access the floppy!" msgstr "" -#: ../../standalone/drakbug:1 +#: ../../install_messages.pm:1 #, c-format -msgid "connecting to Bugzilla wizard ..." -msgstr "பக்சிலாவோடு இணைகிறது" +msgid "" +"Warning: Free Software may not necessarily be patent free, and some Free\n" +"Software included may be covered by patents in your country. For example, " +"the\n" +"MP3 decoders included may require a licence for further usage (see\n" +"http://www.mp3licensing.com for more details). If you are unsure if a " +"patent\n" +"may be applicable to you, check your local laws." +msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format @@ -4250,6 +4312,11 @@ msgstr "ஒப்புக் கொள்கிறேன்" msgid "Description" msgstr "குறிப்பு" +#: ../../standalone/drakbug:1 +#, c-format +msgid "Please enter summary text." +msgstr "" + #: ../../fsedit.pm:1 #, c-format msgid "Error opening %s for writing: %s" @@ -5147,7 +5214,7 @@ msgstr "" msgid "Right Control key" msgstr "வலது Alt விசை" -#: ../../network/adsl.pm:1 +#: ../../network/tools.pm:1 #, fuzzy, c-format msgid "" "Insert a FAT formatted floppy in drive %s with %s in root directory and " @@ -6178,6 +6245,22 @@ msgstr "" msgid "busmouse" msgstr "பஸ்எலி" +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - Create Etherboot Enabled Boot Images:\n" +" \tTo boot a kernel via etherboot, a special kernel/initrd image must " +"be created.\n" +" \tmkinitrd-net does much of this work and drakTermServ is just a " +"graphical \n" +" \tinterface to help manage/customize these images. To create the " +"file \n" +" \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " +"include in \n" +" \tdhcpd.conf, you should create the etherboot images for at least " +"one full kernel." +msgstr "" + #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Login (user name)" @@ -6522,24 +6605,6 @@ msgstr ":புதிய பயனர்குறிப்பின் பெய msgid "Floppy" msgstr "ெநகிழ்வட்டு" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Maintain /etc/exports:\n" -" \t\tClusternfs allows export of the root filesystem to diskless " -"clients. drakTermServ\n" -" \t\tsets up the correct entry to allow anonymous access to the root " -"filesystem from\n" -" \t\tdiskless clients.\n" -"\n" -" \t\tA typical exports entry for clusternfs is:\n" -" \t\t\n" -" \t\t/ (ro,all_squash)\n" -" \t\t/home SUBNET/MASK(rw,root_squash)\n" -"\t\t\t\n" -"\t\t\tWith SUBNET/MASK being defined for your network." -msgstr "" - #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript referencing" @@ -7083,6 +7148,11 @@ msgstr "இணையத் தொடர்பு பரிமாறி" msgid "Choose file" msgstr "சாதனத்ைத தேர்வுச் செய்யுங்கள்" +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Summary: " +msgstr "உரை" + #: ../../network/shorewall.pm:1 #, c-format msgid "" @@ -7155,6 +7225,17 @@ msgstr "பிரஞ்சு தென் குடியிருப்பு" msgid "the vendor name of the processor" msgstr "சாதனங்களின் விற்பவர் பெயர்" +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - Maintain %s:\n" +" \tFor users to be able to log into the system from a diskless " +"client, their entry in\n" +" \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" +" \thelps in this respect by adding or removing system users from this " +"file." +msgstr "" + #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All data on this partition should be backed-up" @@ -7451,6 +7532,11 @@ msgstr "" msgid "Encryption key for %s" msgstr "மறைக்குறியீட்டுச் சாவி" +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Do you want to recover your system?" +msgstr "தயவுசெய்து நிறுவுவதற்கு ஆங்கிலத்ைத பயன்படுத்துங்கள்" + #: ../../services.pm:1 #, c-format msgid "" @@ -7867,6 +7953,11 @@ msgstr "X-ஐ வடிவமைக்கவும்" msgid ", " msgstr "" +#: ../../standalone/drakbug:1 +#, c-format +msgid "Submit lspci" +msgstr "" + #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remove selected host/network" @@ -8095,6 +8186,11 @@ msgstr "" "\n" "இதை வைத்து உங்கள் வலையமைப்பாக்கத்ைத அமைக்கட்டுமா" +#: ../../standalone/drakbug:1 +#, c-format +msgid "Submit cpuinfo" +msgstr "" + #: ../../install_steps_gtk.pm:1 #, c-format msgid "Minimal install" @@ -8105,6 +8201,11 @@ msgstr "குறைந்தபட்ச நிறுவல்" msgid "Ethiopia" msgstr "எத்தியோப்பியா" +#: ../../standalone/drakbackup:1 +#, c-format +msgid "YES" +msgstr "" + #: ../../security/l10n.pm:1 #, c-format msgid "Enable \"crontab\" and \"at\" for users" @@ -8429,13 +8530,6 @@ msgstr "நிறுவல் முறை" msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"- Daemon (%s) include:\n" -msgstr "" - #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated numbers" @@ -8743,6 +8837,11 @@ msgstr "திரையகத்தின் கிடையான ஒத்த msgid "Path" msgstr "" +#: ../../standalone/drakbug:1 +#, c-format +msgid "NOT FOUND" +msgstr "" + #: ../../printer/printerdrake.pm:1 #, c-format msgid "" @@ -9312,18 +9411,6 @@ msgstr "முக்கியமானவை" msgid "Total Progress" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n" -" \t\tFor users to be able to log into the system from a diskless " -"client, their entry in\n" -" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$" -"\\$. drakTermServ helps\n" -" \t\tin this respect by adding or removing system users from this " -"file." -msgstr "" - #: ../../help.pm:1 #, fuzzy, c-format msgid "" @@ -9465,6 +9552,26 @@ msgstr "எவ்வித X வடிவமைப்ேபா வைத்த msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "" +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - Maintain /etc/dhcpd.conf:\n" +" \tTo net boot clients, each client needs a dhcpd.conf entry, " +"assigning an IP \n" +" \taddress and net boot images to the machine. drakTermServ helps " +"create/remove \n" +" \tthese entries.\n" +"\t\t\t\n" +" \t(PCI cards may omit the image - etherboot will request the correct " +"image. \n" +"\t\t\tYou should also consider that when etherboot looks for the images, it " +"expects \n" +"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" +"\t\t\t \n" +" \tA typical dhcpd.conf stanza to support a diskless client looks " +"like:" +msgstr "" + #: ../../harddrake/sound.pm:1 #, c-format msgid "There's no known driver for your sound card (%s)" @@ -9576,6 +9683,13 @@ msgid "" "in number of characters" msgstr "" +#: ../../fsedit.pm:1 +#, c-format +msgid "" +"You may not be able to install lilo (since lilo doesn't handle a LV on " +"multiple PVs)" +msgstr "" + #: ../../install_steps_gtk.pm:1 #, c-format msgid "Updating package selection" @@ -9867,6 +9981,16 @@ msgstr "கணினியின்பெயர்: " msgid "Unselect fonts installed" msgstr "நிறுவப்படவில்ைல" +#: ../../mouse.pm:1 +#, c-format +msgid "Wheel" +msgstr "சக்கரம்" + +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Submit kernel version" +msgstr "கரு வெளியீடு" + #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1 @@ -9888,11 +10012,6 @@ msgstr "தவிர்" msgid "Searching for configured scanners ..." msgstr "உள்ளமைக் அச்சுப்பொறி" -#: ../../mouse.pm:1 -#, c-format -msgid "Wheel" -msgstr "சக்கரம்" - #: ../../harddrake/data.pm:1 #, c-format msgid "Videocard" @@ -9958,6 +10077,11 @@ msgstr "கொடாநிலை" msgid "Button 2 Emulation" msgstr "2-பொத்தான் போன்மி" +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Please enter a package name." +msgstr "பயனருக்கு ஓர் பெயர் கொடுக்கவும்" + #: ../../security/l10n.pm:1 #, c-format msgid "Run chkrootkit checks" @@ -10037,6 +10161,11 @@ msgid "" "\n" msgstr "" +#: ../../install_messages.pm:1 +#, fuzzy, c-format +msgid "http://www.mandrakelinux.com/en/92errata.php3" +msgstr "http://www.mandrakelinux.com/en/90errata.php3" + #: ../../lang.pm:1 #, c-format msgid "Honduras" @@ -10187,6 +10316,45 @@ msgstr "கோப்பமைப்பு மறைக்குறியீட msgid "Gujarati" msgstr "குஜராத்தி" +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" While you can use a pool of IP addresses, rather than setup a " +"specific entry for\n" +" a client machine, using a fixed address scheme facilitates using the " +"functionality\n" +" of client-specific configuration files that ClusterNFS provides.\n" +"\t\t\t\n" +" Note: The '#type' entry is only used by drakTermServ. Clients can " +"either be 'thin'\n" +" or 'fat'. Thin clients run most software on the server via xdmcp, " +"while fat clients run \n" +" most software on the client machine. A special inittab, %s is\n" +" written for thin clients. System config files xdm-config, kdmrc, and " +"gdm.conf are \n" +" modified if thin clients are used, to enable xdmcp. Since there are " +"security issues in \n" +" using xdmcp, hosts.deny and hosts.allow are modified to limit access " +"to the local\n" +" subnet.\n" +"\t\t\t\n" +" Note: The '#hdw_config' entry is also only used by drakTermServ. " +"Clients can either \n" +" be 'true' or 'false'. 'true' enables root login at the client " +"machine and allows local \n" +" hardware configuration of sound, mouse, and X, using the 'drak' " +"tools. This is enabled \n" +" by creating separate config files associated with the client's IP " +"address and creating \n" +" read/write mount points to allow the client to alter the file. Once " +"you are satisfied \n" +" with the configuration, you can remove root login privileges from " +"the client.\n" +"\t\t\t\n" +" Note: You must stop/start the server after adding or changing " +"clients." +msgstr "" + #: ../../interactive/stdio.pm:1 #, c-format msgid "" @@ -10493,45 +10661,6 @@ msgid "" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific " -"entry for\n" -"\t\t\ta client machine, using a fixed address scheme facilitates using the " -"functionality\n" -"\t\t\tof client-specific configuration files that ClusterNFS provides.\n" -"\t\t\t\n" -"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can " -"either be 'thin'\n" -"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, " -"while fat clients run \n" -"\t\t\tmost software on the client machine. A special inittab, /etc/inittab\\$" -"\\$IP=client_ip\\$\\$ is\n" -"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and " -"gdm.conf are \n" -"\t\t\tmodified if thin clients are used, to enable xdmcp. Since there are " -"security issues in \n" -"\t\t\tusing xdmcp, hosts.deny and hosts.allow are modified to limit access " -"to the local\n" -"\t\t\tsubnet.\n" -"\t\t\t\n" -"\t\t\tNote: The \"#hdw_config\" entry is also only used by drakTermServ. " -"Clients can either \n" -"\t\t\tbe 'true' or 'false'. 'true' enables root login at the client machine " -"and allows local \n" -"\t\t\thardware configuration of sound, mouse, and X, using the 'drak' tools. " -"This is enabled \n" -"\t\t\tby creating separate config files associated with the client's IP " -"address and creating \n" -"\t\t\tread/write mount points to allow the client to alter the file. Once " -"you are satisfied \n" -"\t\t\twith the configuration, you can remove root login privileges from the " -"client.\n" -"\t\t\t\n" -"\t\t\tNote: You must stop/start the server after adding or changing clients." -msgstr "" - #: ../../standalone/drakconnect:1 #, c-format msgid "Configure Local Area Network..." @@ -10914,23 +11043,11 @@ msgstr "/dev/hda" msgid "/dev/hdb" msgstr "/dev/hdb" -#: ../../standalone/drakTermServ:1 +#: ../../standalone/drakbug:1 #, c-format msgid "" -" - Maintain /etc/dhcpd.conf:\n" -" \t\tTo net boot clients, each client needs a dhcpd.conf entry, " -"assigning an IP address\n" -" \t\tand net boot images to the machine. drakTermServ helps create/" -"remove these entries.\n" -"\t\t\t\n" -" \t\t(PCI cards may omit the image - etherboot will request the " -"correct image. You should\n" -" \t\talso consider that when etherboot looks for the images, it " -"expects names like\n" -" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" -"\t\t\t \n" -" \t\tA typical dhcpd.conf stanza to support a diskless client looks " -"like:" +"Application Name\n" +"or Full Path:" msgstr "" #: ../../services.pm:1 @@ -11286,22 +11403,6 @@ msgstr "%s பொதிகளை நிறுவுவதில் பிழை msgid "You will receive an alert if the load is higher than this value" msgstr "" -#: ../../standalone/drakbug:1 -#, c-format -msgid "" -"\n" -"\n" -"To submit a bug report, click on the button report.\n" -"This will open a web browser window on https://drakbug.mandrakesoft.com\n" -" where you'll find a form to fill in.The information displayed above will " -"be \n" -"transferred to that server\n" -"\n" -msgstr "" -"\n" -"\n" -"பிழை அறிவிப்பாளன்\n" - #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Add a scanner manually" @@ -11433,7 +11534,7 @@ msgstr "பாதுகாப்பு மேலாளர்(பெயர் அ msgid "Set the shell timeout. A value of zero means no timeout." msgstr "" -#: ../../network/adsl.pm:1 +#: ../../network/tools.pm:1 #, c-format msgid "Firmware copy succeeded" msgstr "" @@ -11758,11 +11859,6 @@ msgid "" "do you really want to overwrite its configuration?" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "No partition available" -msgstr "வகிர் ஏதுமில்ைல" - #: ../../standalone/scannerdrake:1 #, c-format msgid "Use the scanners on hosts: " @@ -11773,6 +11869,11 @@ msgstr "" msgid "Unselected All" msgstr "" +#: ../../install_steps_interactive.pm:1 ../../network/tools.pm:1 +#, c-format +msgid "No partition available" +msgstr "வகிர் ஏதுமில்ைல" + #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Printer Management \n" @@ -11813,7 +11914,7 @@ msgstr "முழு கருவையையும் உருவாக்க msgid "modem" msgstr "ேமாடம்" -#: ../../install_steps.pm:1 +#: ../../lang.pm:1 #, c-format msgid "Welcome to %s" msgstr "%s க்கு நல்வரவு " @@ -11884,6 +11985,13 @@ msgstr "" msgid "Not the correct CD label. Disk is labelled %s." msgstr "" +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"\n" +"- Daemon, %s via:\n" +msgstr "" + #: ../../standalone/drakgw:1 #, c-format msgid "" @@ -12013,26 +12121,6 @@ msgid "" "- System Files:\n" msgstr "சாளர பாந்தம்" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Per client system configuration files:\n" -" \t\tThrough clusternfs, each diskless client can have its own unique " -"configuration files\n" -" \t\ton the root filesystem of the server. By allowing local client " -"hardware configuration, \n" -"\t\t\t\tclients can customize files such as /etc/modules.conf, /etc/" -"sysconfig/mouse, \n" -" \t\t/etc/sysconfig/keyboard on a per-client basis.\n" -"\n" -" Note: Enabling local client hardware configuration does enable root " -"login to the terminal \n" -" server on each client machine that has this feature enabled. Local " -"configuration can be turned\n" -" back off, retaining the configuration files, once the client machine " -"is configured." -msgstr "" - #: ../../standalone/drakbug:1 #, c-format msgid "Standalone Tools" @@ -12815,7 +12903,7 @@ msgstr "" msgid "Local Printer" msgstr "உள்ளமை அச்சுப்ெபாறி" -#: ../../network/adsl.pm:1 +#: ../../network/tools.pm:1 #, fuzzy, c-format msgid "Floppy access error, unable to mount device %s" msgstr "உங்கள் %s வட்ைட எங்கு ஏற்ற விரும்புகிறீர்கள்?" @@ -12921,36 +13009,6 @@ msgstr "எலியின் வகை: %s\n" msgid "Reselect correct fonts" msgstr "எழுத்துருத் தேர்வாளர்" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - /etc/xinetd.d/tftp:\n" -" \t\tdrakTermServ will configure this file to work in conjunction " -"with the images created by\n" -" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " -"the boot image to each\n" -" \t\tdiskless client.\n" -"\n" -" \t\tA typical tftp configuration file looks like:\n" -" \t\t\n" -" \t\tservice tftp\n" -"\t\t\t{\n" -" disable = no\n" -" socket_type = dgram\n" -" protocol = udp\n" -" wait = yes\n" -" user = root\n" -" server = /usr/sbin/in.tftpd\n" -" server_args = -s /var/lib/tftpboot\n" -" \t\t}\n" -" \t\t\n" -" \t\tThe changes here from the default installation are changing the " -"disable flag to\n" -" \t\t'no' and changing the directory path to /var/lib/tftpboot, where " -"mkinitrd-net\n" -" \t\tputs its images." -msgstr "" - #: ../../help.pm:1 #, fuzzy, c-format msgid "" @@ -13206,6 +13264,11 @@ msgstr "மே" msgid "Yaboot mode" msgstr "யாதொடக்க முறைமை" +#: ../../mouse.pm:1 +#, c-format +msgid "Generic 3 Button Mouse" +msgstr "பொதுவான 3 பொத்தான் எலி" + #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable)" @@ -13220,11 +13283,6 @@ msgstr "" "லிலோவை மீண்டும் துவக்க முடியவில்ைல\n" "\"லிலோ\" என்ற கட்டளையை நிர்வாகியாக மாறிக் கொடு" -#: ../../mouse.pm:1 -#, c-format -msgid "Generic 3 Button Mouse" -msgstr "பொதுவான 3 பொத்தான் எலி" - #: ../../standalone/drakbackup:1 #, c-format msgid "Select another media to restore from" @@ -13543,23 +13601,6 @@ msgid "" " --id - load the html help page which refers to id_label\n" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Create etherboot floppies/CDs:\n" -" \t\tThe diskless client machines need either ROM images on the NIC, " -"or a boot floppy\n" -" \t\tor CD to initate the boot sequence. drakTermServ will help " -"generate these images,\n" -" \t\tbased on the NIC in the client machine.\n" -" \t\t\n" -" \t\tA basic example of creating a boot floppy for a 3Com 3c509 " -"manually:\n" -" \t\t\n" -" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n" -" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0" -msgstr "" - #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Select a scanner model" @@ -13938,11 +13979,6 @@ msgstr "களத்தின் பெயர்" msgid "Sharing of local printers" msgstr "உள்ளமைக் அச்சுப்ெபாறி" -#: ../../install_messages.pm:1 -#, fuzzy, c-format -msgid "http://www.mandrakelinux.com/en/92errata.php3" -msgstr "http://www.mandrakelinux.com/en/90errata.php3" - #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable libsafe if libsafe is found on the system." @@ -13953,6 +13989,11 @@ msgstr "" msgid "Available printers" msgstr "" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "NO" +msgstr "தகவல்" + #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Empty" @@ -13989,21 +14030,6 @@ msgstr "" "\n" "சரி என்பதை கிளிக் செய்யவும்" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Create Etherboot Enabled Boot Images:\n" -" \t\tTo boot a kernel via etherboot, a special kernel/initrd image " -"must be created.\n" -" \t\tmkinitrd-net does much of this work and drakTermServ is just a " -"graphical interface\n" -" \t\tto help manage/customize these images. To create the file \n" -" \t\t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " -"include in \n" -" \t\tdhcpd.conf, you should create the etherboot images for at least " -"one full kernel." -msgstr "" - #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Interface \"%s\"" @@ -14782,6 +14808,17 @@ msgstr "கடுமையான பிழை" msgid "Refresh the list" msgstr "பயனரின் பட்டியல்" +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - Per client %s:\n" +" \tThrough clusternfs, each diskless client can have its own unique " +"configuration files\n" +" \ton the root filesystem of the server. By allowing local client " +"hardware configuration, \n" +" \tdrakTermServ will help create these files." +msgstr "" + #: ../../standalone/drakpxe:1 #, c-format msgid "" @@ -15318,12 +15355,17 @@ msgstr "பொது-இன திரையகம்" msgid "Cylinder %d to %d\n" msgstr "%d முதல் %d வரை உள்ள உருளைகள்\n" +#: ../../standalone/drakbug:1 +#, c-format +msgid "YOUR TEXT HERE" +msgstr "" + #: ../../standalone/drakconnect:1 #, c-format msgid "New profile..." msgstr "புதிய பயனர்குறிப்பு " -#: ../../standalone/draksec:1 +#: ../../modules/interactive.pm:1 ../../standalone/draksec:1 #, c-format msgid "NONE" msgstr "" @@ -15895,6 +15937,11 @@ msgstr "மற்ற பல்லூடக சாதனங்கள்" msgid "burner" msgstr "அச்சுப்ெபாறி" +#: ../../standalone/drakbug:1 +#, c-format +msgid "Bug Description/System Information" +msgstr "" + #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid " (Default is all users)" @@ -16019,6 +16066,26 @@ msgstr "அழைப்பு வழி விருப்பத்ேதர் msgid "If no port is given, 631 will be taken as default." msgstr "" +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - Per client system configuration files:\n" +" \tThrough clusternfs, each diskless client can have its own unique " +"configuration files\n" +" \ton the root filesystem of the server. By allowing local client " +"hardware configuration, \n" +" \tclients can customize files such as /etc/modules.conf, /etc/" +"sysconfig/mouse, \n" +" \t/etc/sysconfig/keyboard on a per-client basis.\n" +"\n" +" Note: Enabling local client hardware configuration does enable root " +"login to the terminal \n" +" server on each client machine that has this feature enabled. Local " +"configuration can be\n" +" turned back off, retaining the configuration files, once the client " +"machine is configured." +msgstr "" + #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "" @@ -16242,7 +16309,7 @@ msgid "" "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" -#: ../../network/adsl.pm:1 ../../network/netconnect.pm:1 +#: ../../network/netconnect.pm:1 ../../network/tools.pm:1 #, c-format msgid "Next" msgstr "அடுத்து" @@ -17498,7 +17565,7 @@ msgstr "" msgid "format of floppies supported by the drive" msgstr "" -#: ../../network/adsl.pm:1 +#: ../../network/tools.pm:1 #, c-format msgid "Firmware copy failed, file %s not found" msgstr "" @@ -18164,6 +18231,11 @@ msgstr "" "\n" "உங்கள் வன் வட்டில் உள்ள அனைத்து விவரங்களையும் இழக்க சம்மதமா?\n" +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Find Package" +msgstr "%d பொதிகள்" + #: ../../printer/printerdrake.pm:1 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" @@ -18279,6 +18351,24 @@ msgstr "LAN வடிவமைப்பு.." msgid "hard disk model" msgstr "வன்தட்டின் வகை" +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - Maintain /etc/exports:\n" +" \tClusternfs allows export of the root filesystem to diskless " +"clients. drakTermServ\n" +" \tsets up the correct entry to allow anonymous access to the root " +"filesystem from\n" +" \tdiskless clients.\n" +"\n" +" \tA typical exports entry for clusternfs is:\n" +" \t\t\n" +" \t/\t\t\t\t\t(ro,all_squash)\n" +" \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" +"\t\t\t\n" +" \tWith SUBNET/MASK being defined for your network." +msgstr "" + #: ../../fsedit.pm:1 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" @@ -18456,16 +18546,16 @@ msgstr "ஆங்கில விசைப்பலகை" msgid "Unmount" msgstr "இறக்கு" -#: ../../standalone/drakfont:1 -#, c-format -msgid "Uninstall Fonts" -msgstr "" - #: ../../mouse.pm:1 #, c-format msgid "Microsoft Explorer" msgstr "மைக்ேரசாப்ட் Explorer-மேலோடி" +#: ../../standalone/drakfont:1 +#, c-format +msgid "Uninstall Fonts" +msgstr "" + #: ../../keyboard.pm:1 #, c-format msgid "German (no dead keys)" @@ -18816,17 +18906,6 @@ msgstr "\"%s\" ...நடைபெறுகிறது" msgid "enable radio support" msgstr "வாெனாலி ஆதரவை ெசயலபடுத்து" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n" -" \t\tThrough clusternfs, each diskless client can have its own unique " -"configuration files\n" -" \t\ton the root filesystem of the server. By allowing local client " -"hardware configuration, \n" -" \t\tdrakTermServ will help create these files." -msgstr "" - #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Scanner sharing to hosts: " -- cgit v1.2.1