From c594dd4575d90186f2d25e00cd95e867b6954f04 Mon Sep 17 00:00:00 2001 From: Pablo Saratxaga Date: Mon, 18 Feb 2002 00:54:49 +0000 Subject: updated pot file --- perl-install/share/po/no.po | 786 +++++++++++++++++++++++--------------------- 1 file changed, 403 insertions(+), 383 deletions(-) (limited to 'perl-install/share/po/no.po') diff --git a/perl-install/share/po/no.po b/perl-install/share/po/no.po index 194f31d33..a6b7c3faf 100644 --- a/perl-install/share/po/no.po +++ b/perl-install/share/po/no.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: DrakX VERSION\n" -"POT-Creation-Date: 2002-02-14 11:59+0100\n" +"POT-Creation-Date: 2002-02-17 21:45+0100\n" "PO-Revision-Date: 2002-02-03 14:34CET\n" "Last-Translator: Andreas Bergstrøm \n" "Language-Team: Norsk\n" @@ -365,7 +365,7 @@ msgstr "" "\n" "%s" -#: ../../Xconfigurator.pm_.c:1540 ../../standalone/localedrake_.c:21 +#: ../../Xconfigurator.pm_.c:1540 ../../standalone/localedrake_.c:27 #, c-format msgid "Please relog into %s to activate the changes" msgstr "Vennligst logg inn i %s på nytt for å aktivere endringene" @@ -614,7 +614,7 @@ msgstr "" "Opsjon ``Begrense kommandolinje-opsjoner'' kan ikke brukes uten et passord" #: ../../any.pm_.c:188 ../../any.pm_.c:753 -#: ../../diskdrake/interactive.pm_.c:1120 +#: ../../diskdrake/interactive.pm_.c:1131 #: ../../install_steps_interactive.pm_.c:1087 msgid "Please try again" msgstr "Vennligst prøv igjen" @@ -657,13 +657,13 @@ msgstr "" "Du kan legge til flere eller endre de eksisterende." #: ../../any.pm_.c:246 ../../standalone/drakbackup_.c:751 -#: ../../standalone/drakbackup_.c:860 ../../standalone/drakfont_.c:761 -#: ../../standalone/drakfont_.c:798 +#: ../../standalone/drakbackup_.c:860 ../../standalone/drakfont_.c:769 +#: ../../standalone/drakfont_.c:806 msgid "Add" msgstr "Legg til" #: ../../any.pm_.c:246 ../../any.pm_.c:764 ../../diskdrake/hd_gtk.pm_.c:153 -#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:85 +#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86 #: ../../interactive_http.pm_.c:153 msgid "Done" msgstr "Ferdig" @@ -770,13 +770,13 @@ msgstr "Har du enda ett?" msgid "Do you have any %s interfaces?" msgstr "Har du noen %s grensesnitt?" -#: ../../any.pm_.c:641 ../../any.pm_.c:812 ../../interactive.pm_.c:123 -#: ../../my_gtk.pm_.c:1001 +#: ../../any.pm_.c:641 ../../any.pm_.c:812 ../../interactive.pm_.c:124 +#: ../../my_gtk.pm_.c:1011 msgid "No" msgstr "Nei" -#: ../../any.pm_.c:641 ../../any.pm_.c:811 ../../interactive.pm_.c:123 -#: ../../my_gtk.pm_.c:1001 +#: ../../any.pm_.c:641 ../../any.pm_.c:811 ../../interactive.pm_.c:124 +#: ../../my_gtk.pm_.c:1011 msgid "Yes" msgstr "Ja" @@ -960,7 +960,7 @@ msgid "You can choose other languages that will be available after install" msgstr "Du kan velge andre språk som vil være tilgjengelige etter installasjon" #: ../../any.pm_.c:838 ../../install_steps_interactive.pm_.c:714 -#: ../../standalone/drakxtv_.c:41 +#: ../../standalone/drakxtv_.c:43 msgid "All" msgstr "Alle" @@ -976,7 +976,7 @@ msgstr "Skreddersydd" msgid "No sharing" msgstr "Ingen deling" -#: ../../any.pm_.c:933 ../../network/nfs.pm_.c:13 ../../network/smb.pm_.c:13 +#: ../../any.pm_.c:933 ../../network/smbnfs.pm_.c:39 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "Pakken %s må installeres. Vil du installere den?" @@ -985,7 +985,7 @@ msgstr "Pakken %s m msgid "You can export using NFS or Samba. Which one do you want" msgstr "Du kan eksportere med NFS eller Samba. Hvilken av dem ønsker du" -#: ../../any.pm_.c:944 ../../network/nfs.pm_.c:17 ../../network/smb.pm_.c:17 +#: ../../any.pm_.c:944 ../../network/smbnfs.pm_.c:43 #, c-format msgid "Mandatory package %s is missing" msgstr "Obligatorisk pakke %s mangler" @@ -1233,9 +1233,9 @@ msgid "Yes, I want autologin with this (user, desktop)" msgstr "Ja, jeg vil ha autologin med denne (bruker; skrivebord)" #: ../../bootlook.pm_.c:159 ../../standalone/drakbackup_.c:2428 -#: ../../standalone/drakbackup_.c:3332 ../../standalone/drakfont_.c:525 -#: ../../standalone/drakfont_.c:627 ../../standalone/drakfont_.c:691 -#: ../../standalone/drakfont_.c:737 ../../standalone/draknet_.c:109 +#: ../../standalone/drakbackup_.c:3332 ../../standalone/drakfont_.c:529 +#: ../../standalone/drakfont_.c:635 ../../standalone/drakfont_.c:699 +#: ../../standalone/drakfont_.c:745 ../../standalone/draknet_.c:109 #: ../../standalone/draknet_.c:141 ../../standalone/draknet_.c:297 #: ../../standalone/draknet_.c:435 ../../standalone/draknet_.c:521 #: ../../standalone/draknet_.c:564 ../../standalone/draknet_.c:665 @@ -1244,16 +1244,16 @@ msgid "OK" msgstr "OK" #: ../../bootlook.pm_.c:160 ../../install_steps_gtk.pm_.c:463 -#: ../../install_steps_gtk.pm_.c:521 ../../interactive.pm_.c:133 -#: ../../interactive.pm_.c:307 ../../interactive.pm_.c:339 -#: ../../interactive_stdio.pm_.c:141 ../../my_gtk.pm_.c:670 -#: ../../my_gtk.pm_.c:673 ../../my_gtk.pm_.c:1002 +#: ../../install_steps_gtk.pm_.c:521 ../../interactive.pm_.c:134 +#: ../../interactive.pm_.c:309 ../../interactive.pm_.c:341 +#: ../../interactive_stdio.pm_.c:141 ../../my_gtk.pm_.c:680 +#: ../../my_gtk.pm_.c:683 ../../my_gtk.pm_.c:1012 #: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1543 #: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2251 #: ../../standalone/drakbackup_.c:2276 ../../standalone/drakbackup_.c:2297 #: ../../standalone/drakbackup_.c:2318 ../../standalone/drakbackup_.c:2336 #: ../../standalone/drakbackup_.c:2384 ../../standalone/drakbackup_.c:2404 -#: ../../standalone/drakbackup_.c:2423 ../../standalone/drakfont_.c:739 +#: ../../standalone/drakbackup_.c:2423 ../../standalone/drakfont_.c:747 #: ../../standalone/drakgw_.c:711 ../../standalone/draknet_.c:116 #: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290 #: ../../standalone/draknet_.c:537 ../../standalone/draknet_.c:679 @@ -1306,7 +1306,7 @@ msgstr "Jeg kan ikke ta skjembilder f msgid "Screenshots will be available after install in %s" msgstr "Skjermbilder vil være tilgjengelig etter installasjon i %s" -#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:37 +#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:39 msgid "France" msgstr "Frankrike" @@ -1342,7 +1342,7 @@ msgstr "Sverige" msgid "Netherlands" msgstr "Netherlands" -#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:37 +#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:39 msgid "Italy" msgstr "Italia" @@ -1350,7 +1350,7 @@ msgstr "Italia" msgid "Austria" msgstr "Østerrike" -#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:64 +#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67 msgid "United States" msgstr "USA" @@ -1358,8 +1358,8 @@ msgstr "USA" msgid "Please make a backup of your data first" msgstr "Vennligst ta sikkerhetskopi av din data først" -#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:876 -#: ../../diskdrake/interactive.pm_.c:885 ../../diskdrake/interactive.pm_.c:939 +#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:887 +#: ../../diskdrake/interactive.pm_.c:896 ../../diskdrake/interactive.pm_.c:950 msgid "Read carefully!" msgstr "Les nøye!" @@ -1374,7 +1374,7 @@ msgstr "" "ved begynnelsen av disken" #: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:324 -#: ../../diskdrake/interactive.pm_.c:339 ../../diskdrake/smbnfs_gtk.pm_.c:44 +#: ../../diskdrake/interactive.pm_.c:339 ../../diskdrake/smbnfs_gtk.pm_.c:45 #: ../../install_steps.pm_.c:72 ../../install_steps_interactive.pm_.c:67 #: ../../install_steps_interactive.pm_.c:350 ../../interactive_http.pm_.c:119 #: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84 @@ -1405,7 +1405,7 @@ msgstr "" msgid "Please click on a partition" msgstr "Vennligst klikk på en partisjon" -#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:66 +#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67 #: ../../install_steps_gtk.pm_.c:522 msgid "Details" msgstr "Detaljer" @@ -1434,7 +1434,7 @@ msgstr "SunOS" msgid "Swap" msgstr "Veksel" -#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1035 +#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1046 msgid "Empty" msgstr "Tom" @@ -1453,7 +1453,7 @@ msgid "Create" msgstr "Opprett" #: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:364 -#: ../../diskdrake/interactive.pm_.c:501 ../../diskdrake/removable.pm_.c:26 +#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:26 #: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17 msgid "Type" msgstr "Type" @@ -1471,7 +1471,7 @@ msgstr "Slett" msgid "Use ``Unmount'' first" msgstr "Bruk ``Demonter'' først" -#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:493 +#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:490 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" @@ -1604,14 +1604,14 @@ msgstr "Pr msgid "Detailed information" msgstr "Detaljert informasjon" -#: ../../diskdrake/interactive.pm_.c:363 ../../diskdrake/interactive.pm_.c:536 -#: ../../diskdrake/interactive.pm_.c:556 ../../diskdrake/removable.pm_.c:24 -#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:82 +#: ../../diskdrake/interactive.pm_.c:363 ../../diskdrake/interactive.pm_.c:533 +#: ../../diskdrake/interactive.pm_.c:553 ../../diskdrake/removable.pm_.c:24 +#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83 msgid "Mount point" msgstr "Monteringspunkt" #: ../../diskdrake/interactive.pm_.c:365 ../../diskdrake/removable.pm_.c:25 -#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:83 +#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84 msgid "Options" msgstr "Valg" @@ -1619,7 +1619,7 @@ msgstr "Valg" msgid "Resize" msgstr "Endre størrelse" -#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:660 +#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:671 msgid "Move" msgstr "Flytt" @@ -1627,7 +1627,7 @@ msgstr "Flytt" msgid "Format" msgstr "Formater" -#: ../../diskdrake/interactive.pm_.c:369 ../../diskdrake/smbnfs_gtk.pm_.c:79 +#: ../../diskdrake/interactive.pm_.c:369 ../../diskdrake/smbnfs_gtk.pm_.c:80 msgid "Mount" msgstr "Monter" @@ -1639,7 +1639,7 @@ msgstr "Legg til RAID" msgid "Add to LVM" msgstr "Legg til LVM" -#: ../../diskdrake/interactive.pm_.c:372 ../../diskdrake/smbnfs_gtk.pm_.c:78 +#: ../../diskdrake/interactive.pm_.c:372 ../../diskdrake/smbnfs_gtk.pm_.c:79 msgid "Unmount" msgstr "Demonter" @@ -1659,59 +1659,59 @@ msgstr "Modifiser RAID" msgid "Use for loopback" msgstr "Bruk for loopback" -#: ../../diskdrake/interactive.pm_.c:419 +#: ../../diskdrake/interactive.pm_.c:416 msgid "Create a new partition" msgstr "Opprette en ny partisjon" -#: ../../diskdrake/interactive.pm_.c:422 +#: ../../diskdrake/interactive.pm_.c:419 msgid "Start sector: " msgstr "Start sektor: " -#: ../../diskdrake/interactive.pm_.c:424 ../../diskdrake/interactive.pm_.c:759 +#: ../../diskdrake/interactive.pm_.c:421 ../../diskdrake/interactive.pm_.c:770 msgid "Size in MB: " msgstr "Størrelse i MB: " -#: ../../diskdrake/interactive.pm_.c:425 ../../diskdrake/interactive.pm_.c:760 +#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:771 msgid "Filesystem type: " msgstr "Filsystemtype: " -#: ../../diskdrake/interactive.pm_.c:426 -#: ../../diskdrake/interactive.pm_.c:1019 -#: ../../diskdrake/interactive.pm_.c:1093 +#: ../../diskdrake/interactive.pm_.c:423 +#: ../../diskdrake/interactive.pm_.c:1030 +#: ../../diskdrake/interactive.pm_.c:1104 msgid "Mount point: " msgstr "Monteringspunkt: " -#: ../../diskdrake/interactive.pm_.c:430 +#: ../../diskdrake/interactive.pm_.c:427 msgid "Preference: " msgstr "Valg: " -#: ../../diskdrake/interactive.pm_.c:474 +#: ../../diskdrake/interactive.pm_.c:471 msgid "Remove the loopback file?" msgstr "Fjern loopbackfilen?" -#: ../../diskdrake/interactive.pm_.c:499 +#: ../../diskdrake/interactive.pm_.c:496 msgid "Change partition type" msgstr "Endre partisjonstype" -#: ../../diskdrake/interactive.pm_.c:500 ../../diskdrake/removable.pm_.c:48 +#: ../../diskdrake/interactive.pm_.c:497 ../../diskdrake/removable.pm_.c:48 msgid "Which filesystem do you want?" msgstr "Hvilket filsystem ønsker du?" -#: ../../diskdrake/interactive.pm_.c:504 +#: ../../diskdrake/interactive.pm_.c:501 msgid "Switching from ext2 to ext3" msgstr "Bytter fra ext2 til ext3" -#: ../../diskdrake/interactive.pm_.c:534 +#: ../../diskdrake/interactive.pm_.c:531 #, c-format msgid "Where do you want to mount loopback file %s?" msgstr "Hvor vil du montere loopback-filen %s?" -#: ../../diskdrake/interactive.pm_.c:535 ../../diskdrake/interactive.pm_.c:555 +#: ../../diskdrake/interactive.pm_.c:532 ../../diskdrake/interactive.pm_.c:552 #, c-format msgid "Where do you want to mount device %s?" msgstr "Hvor vil du montere %s enheten?" -#: ../../diskdrake/interactive.pm_.c:541 +#: ../../diskdrake/interactive.pm_.c:538 msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" @@ -1719,11 +1719,11 @@ msgstr "" "Kan ikke fjerne monteringspunkt da denne partisjonen blir brukt til\n" "loopback. Fjern loopback først" -#: ../../diskdrake/interactive.pm_.c:579 +#: ../../diskdrake/interactive.pm_.c:576 msgid "Computing FAT filesystem bounds" msgstr "Beregner fat filsystemgrense" -#: ../../diskdrake/interactive.pm_.c:579 ../../diskdrake/interactive.pm_.c:635 +#: ../../diskdrake/interactive.pm_.c:576 ../../diskdrake/interactive.pm_.c:635 #: ../../install_interactive.pm_.c:130 msgid "Resizing" msgstr "Endrer størrelse" @@ -1751,95 +1751,95 @@ msgstr "Velg den nye st msgid "New size in MB: " msgstr "Ny størrelse i MB: " -#: ../../diskdrake/interactive.pm_.c:661 +#: ../../diskdrake/interactive.pm_.c:672 msgid "Which disk do you want to move it to?" msgstr "Hvilken disk vil du flytte til?" -#: ../../diskdrake/interactive.pm_.c:662 +#: ../../diskdrake/interactive.pm_.c:673 msgid "Sector" msgstr "Sektor" -#: ../../diskdrake/interactive.pm_.c:663 +#: ../../diskdrake/interactive.pm_.c:674 msgid "Which sector do you want to move it to?" msgstr "Hvilken sektor vil du flytte til?" -#: ../../diskdrake/interactive.pm_.c:666 +#: ../../diskdrake/interactive.pm_.c:677 msgid "Moving" msgstr "Flytter" -#: ../../diskdrake/interactive.pm_.c:666 +#: ../../diskdrake/interactive.pm_.c:677 msgid "Moving partition..." msgstr "Flytter partisjon..." -#: ../../diskdrake/interactive.pm_.c:683 +#: ../../diskdrake/interactive.pm_.c:694 msgid "Choose an existing RAID to add to" msgstr "Velg en eksisterende RAID for å legge til" -#: ../../diskdrake/interactive.pm_.c:684 ../../diskdrake/interactive.pm_.c:702 +#: ../../diskdrake/interactive.pm_.c:695 ../../diskdrake/interactive.pm_.c:713 msgid "new" msgstr "ny" -#: ../../diskdrake/interactive.pm_.c:700 +#: ../../diskdrake/interactive.pm_.c:711 msgid "Choose an existing LVM to add to" msgstr "Velg en eksisterende LVM for å legge til" -#: ../../diskdrake/interactive.pm_.c:705 +#: ../../diskdrake/interactive.pm_.c:716 msgid "LVM name?" msgstr "LVM navn?" -#: ../../diskdrake/interactive.pm_.c:745 +#: ../../diskdrake/interactive.pm_.c:756 msgid "This partition can't be used for loopback" msgstr "Denne partisjonen kan ikke brukes for loopback" -#: ../../diskdrake/interactive.pm_.c:757 +#: ../../diskdrake/interactive.pm_.c:768 msgid "Loopback" msgstr "Loopback" -#: ../../diskdrake/interactive.pm_.c:758 +#: ../../diskdrake/interactive.pm_.c:769 msgid "Loopback file name: " msgstr "Loopback filnavn: " -#: ../../diskdrake/interactive.pm_.c:763 +#: ../../diskdrake/interactive.pm_.c:774 msgid "Give a file name" msgstr "Gi ett filnavn" -#: ../../diskdrake/interactive.pm_.c:766 +#: ../../diskdrake/interactive.pm_.c:777 msgid "File already used by another loopback, choose another one" msgstr "Filen blir allerede brukt av en annen loopback, velg en annen" -#: ../../diskdrake/interactive.pm_.c:767 +#: ../../diskdrake/interactive.pm_.c:778 msgid "File already exists. Use it?" msgstr "Filen eksisterer allerede. Bruke denne?" -#: ../../diskdrake/interactive.pm_.c:790 +#: ../../diskdrake/interactive.pm_.c:801 msgid "Mount options" msgstr "Monteringsvalg:" -#: ../../diskdrake/interactive.pm_.c:797 +#: ../../diskdrake/interactive.pm_.c:808 msgid "Various" msgstr "Diverse" -#: ../../diskdrake/interactive.pm_.c:859 +#: ../../diskdrake/interactive.pm_.c:870 msgid "device" msgstr "enhet" -#: ../../diskdrake/interactive.pm_.c:860 +#: ../../diskdrake/interactive.pm_.c:871 msgid "level" msgstr "nivå" -#: ../../diskdrake/interactive.pm_.c:861 +#: ../../diskdrake/interactive.pm_.c:872 msgid "chunk size" msgstr "skivestørrelse" -#: ../../diskdrake/interactive.pm_.c:876 +#: ../../diskdrake/interactive.pm_.c:887 msgid "Be careful: this operation is dangerous." msgstr "Vær forsiktig: denne operasjonen er farlig." -#: ../../diskdrake/interactive.pm_.c:891 +#: ../../diskdrake/interactive.pm_.c:902 msgid "What type of partitioning?" msgstr "Hva slags type partisjonering?" -#: ../../diskdrake/interactive.pm_.c:909 +#: ../../diskdrake/interactive.pm_.c:920 msgid "" "Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " "1024).\n" @@ -1851,7 +1851,7 @@ msgstr "" "Enten bruker du LILO og denne ikke virker, eller du bruker ikke LILO og du " "trenger ikke /boot" -#: ../../diskdrake/interactive.pm_.c:913 +#: ../../diskdrake/interactive.pm_.c:924 msgid "" "The partition you've selected to add as root (/) is physically located " "beyond\n" @@ -1864,7 +1864,7 @@ msgstr "" "Hvis du skal bruke oppstartshåndtereren LILO, vær nøye med å legge til en\n" "/boot partisjon" -#: ../../diskdrake/interactive.pm_.c:919 +#: ../../diskdrake/interactive.pm_.c:930 msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" @@ -1874,46 +1874,46 @@ msgstr "" "Ingen oppstartslaster kan håndtere dette uten en /boot partisjon.\n" "Så vær nøye med å legge til en /boot partisjon" -#: ../../diskdrake/interactive.pm_.c:939 +#: ../../diskdrake/interactive.pm_.c:950 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "Partisjonstabellen på disk %s blir nå skrevet til disk!" -#: ../../diskdrake/interactive.pm_.c:943 +#: ../../diskdrake/interactive.pm_.c:954 msgid "You'll need to reboot before the modification can take place" msgstr "Du må starte maskinen på nytt for at modifiseringene skal tre i kraft" -#: ../../diskdrake/interactive.pm_.c:954 +#: ../../diskdrake/interactive.pm_.c:965 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" "Etter formatering av partisjon %s vil alle data på denne partisjonen\n" "gå tapt" -#: ../../diskdrake/interactive.pm_.c:956 +#: ../../diskdrake/interactive.pm_.c:967 msgid "Formatting" msgstr "Formatering" -#: ../../diskdrake/interactive.pm_.c:957 +#: ../../diskdrake/interactive.pm_.c:968 #, c-format msgid "Formatting loopback file %s" msgstr "Formaterer loopback-fil %s" -#: ../../diskdrake/interactive.pm_.c:958 +#: ../../diskdrake/interactive.pm_.c:969 #: ../../install_steps_interactive.pm_.c:459 #, c-format msgid "Formatting partition %s" msgstr "Formaterer partisjon %s" -#: ../../diskdrake/interactive.pm_.c:969 +#: ../../diskdrake/interactive.pm_.c:980 msgid "Hide files" msgstr "Gjem filer" -#: ../../diskdrake/interactive.pm_.c:969 +#: ../../diskdrake/interactive.pm_.c:980 msgid "Move files to the new partition" msgstr "Flytt filer til en ny partisjon" -#: ../../diskdrake/interactive.pm_.c:970 +#: ../../diskdrake/interactive.pm_.c:981 #, c-format msgid "" "Directory %s already contain some data\n" @@ -1922,83 +1922,83 @@ msgstr "" "Katalogen %s inneholder allerede noe data\n" "(%s)" -#: ../../diskdrake/interactive.pm_.c:981 +#: ../../diskdrake/interactive.pm_.c:992 msgid "Moving files to the new partition" msgstr "Flytt filer til en ny partisjon" -#: ../../diskdrake/interactive.pm_.c:985 +#: ../../diskdrake/interactive.pm_.c:996 #, c-format msgid "Copying %s" msgstr "Kopierer %s" -#: ../../diskdrake/interactive.pm_.c:989 +#: ../../diskdrake/interactive.pm_.c:1000 #, c-format msgid "Removing %s" msgstr "Fjerner %s" -#: ../../diskdrake/interactive.pm_.c:999 +#: ../../diskdrake/interactive.pm_.c:1010 #, c-format msgid "partition %s is now known as %s" msgstr "partisjon %s er nå kjent som %s" -#: ../../diskdrake/interactive.pm_.c:1020 -#: ../../diskdrake/interactive.pm_.c:1079 +#: ../../diskdrake/interactive.pm_.c:1031 +#: ../../diskdrake/interactive.pm_.c:1090 msgid "Device: " msgstr "Enhet: " -#: ../../diskdrake/interactive.pm_.c:1021 +#: ../../diskdrake/interactive.pm_.c:1032 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "DOS diskbokstav: %s (bare en gjetning)\n" -#: ../../diskdrake/interactive.pm_.c:1025 -#: ../../diskdrake/interactive.pm_.c:1033 -#: ../../diskdrake/interactive.pm_.c:1097 +#: ../../diskdrake/interactive.pm_.c:1036 +#: ../../diskdrake/interactive.pm_.c:1044 +#: ../../diskdrake/interactive.pm_.c:1108 msgid "Type: " msgstr "Type: " -#: ../../diskdrake/interactive.pm_.c:1029 +#: ../../diskdrake/interactive.pm_.c:1040 msgid "Name: " msgstr "Navn: " -#: ../../diskdrake/interactive.pm_.c:1037 +#: ../../diskdrake/interactive.pm_.c:1048 #, c-format msgid "Start: sector %s\n" msgstr "Start: sektor %s\n" -#: ../../diskdrake/interactive.pm_.c:1038 +#: ../../diskdrake/interactive.pm_.c:1049 #, c-format msgid "Size: %s" msgstr "Størrelse: %s" -#: ../../diskdrake/interactive.pm_.c:1040 +#: ../../diskdrake/interactive.pm_.c:1051 #, c-format msgid ", %s sectors" msgstr ", %s sektorer" -#: ../../diskdrake/interactive.pm_.c:1042 +#: ../../diskdrake/interactive.pm_.c:1053 #, c-format msgid "Cylinder %d to cylinder %d\n" msgstr "Sylinder %d til sylinder %d\n" -#: ../../diskdrake/interactive.pm_.c:1043 +#: ../../diskdrake/interactive.pm_.c:1054 msgid "Formatted\n" msgstr "Formatert\n" -#: ../../diskdrake/interactive.pm_.c:1044 +#: ../../diskdrake/interactive.pm_.c:1055 msgid "Not formatted\n" msgstr "Ikke formatert\n" -#: ../../diskdrake/interactive.pm_.c:1045 +#: ../../diskdrake/interactive.pm_.c:1056 msgid "Mounted\n" msgstr "Montert\n" -#: ../../diskdrake/interactive.pm_.c:1046 +#: ../../diskdrake/interactive.pm_.c:1057 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" -#: ../../diskdrake/interactive.pm_.c:1048 +#: ../../diskdrake/interactive.pm_.c:1059 #, c-format msgid "" "Loopback file(s):\n" @@ -2007,7 +2007,7 @@ msgstr "" "Loopback-fil(er): \n" " %s\n" -#: ../../diskdrake/interactive.pm_.c:1049 +#: ../../diskdrake/interactive.pm_.c:1060 msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" @@ -2015,27 +2015,27 @@ msgstr "" "Partisjon startet opp som standard\n" " (for MS-DOS oppstart, ikke for lilo)\n" -#: ../../diskdrake/interactive.pm_.c:1051 +#: ../../diskdrake/interactive.pm_.c:1062 #, c-format msgid "Level %s\n" msgstr "Nivå %s\n" -#: ../../diskdrake/interactive.pm_.c:1052 +#: ../../diskdrake/interactive.pm_.c:1063 #, c-format msgid "Chunk size %s\n" msgstr "Skivestørrelse %s\n" -#: ../../diskdrake/interactive.pm_.c:1053 +#: ../../diskdrake/interactive.pm_.c:1064 #, c-format msgid "RAID-disks %s\n" msgstr "RAID-disker %s\n" -#: ../../diskdrake/interactive.pm_.c:1055 +#: ../../diskdrake/interactive.pm_.c:1066 #, c-format msgid "Loopback file name: %s" msgstr "Loopback filnavn: %s" -#: ../../diskdrake/interactive.pm_.c:1058 +#: ../../diskdrake/interactive.pm_.c:1069 msgid "" "\n" "Chances are, this partition is\n" @@ -2048,7 +2048,7 @@ msgstr "" "driverpartisjon, du bør nok\n" "la den være i fred.\n" -#: ../../diskdrake/interactive.pm_.c:1061 +#: ../../diskdrake/interactive.pm_.c:1072 msgid "" "\n" "This special Bootstrap\n" @@ -2060,62 +2060,62 @@ msgstr "" "partisjonen er for å\n" "dual-boote ditt system.\n" -#: ../../diskdrake/interactive.pm_.c:1080 +#: ../../diskdrake/interactive.pm_.c:1091 #, c-format msgid "Size: %s\n" msgstr "Størrelse: %s\n" -#: ../../diskdrake/interactive.pm_.c:1081 +#: ../../diskdrake/interactive.pm_.c:1092 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Geometri: %s sylindere, %s hoder, %s sektorer\n" -#: ../../diskdrake/interactive.pm_.c:1082 +#: ../../diskdrake/interactive.pm_.c:1093 msgid "Info: " msgstr "Info: " -#: ../../diskdrake/interactive.pm_.c:1083 +#: ../../diskdrake/interactive.pm_.c:1094 #, c-format msgid "LVM-disks %s\n" msgstr "LVM-disker %s\n" -#: ../../diskdrake/interactive.pm_.c:1084 +#: ../../diskdrake/interactive.pm_.c:1095 #, c-format msgid "Partition table type: %s\n" msgstr "Type partisjonstabell: %s\n" -#: ../../diskdrake/interactive.pm_.c:1085 +#: ../../diskdrake/interactive.pm_.c:1096 #, c-format msgid "on bus %d id %d\n" msgstr "på buss %d id %d\n" -#: ../../diskdrake/interactive.pm_.c:1099 +#: ../../diskdrake/interactive.pm_.c:1110 #, c-format msgid "Options: %s" msgstr "Valg: %s" -#: ../../diskdrake/interactive.pm_.c:1115 +#: ../../diskdrake/interactive.pm_.c:1126 msgid "Filesystem encryption key" msgstr "Filsystemkrypteringsnøkkel" -#: ../../diskdrake/interactive.pm_.c:1116 +#: ../../diskdrake/interactive.pm_.c:1127 msgid "Choose your filesystem encryption key" msgstr "Velg din filsystemkrypteringsnøkkel" -#: ../../diskdrake/interactive.pm_.c:1119 +#: ../../diskdrake/interactive.pm_.c:1130 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "Denne krypteringsnøkkelen er for enkel (må være minst %d tegn lang)" -#: ../../diskdrake/interactive.pm_.c:1120 +#: ../../diskdrake/interactive.pm_.c:1131 msgid "The encryption keys do not match" msgstr "Krypteringsnøkkelene stemmer ikke overens" -#: ../../diskdrake/interactive.pm_.c:1123 +#: ../../diskdrake/interactive.pm_.c:1134 msgid "Encryption key" msgstr "Krypteringsnøkkel" -#: ../../diskdrake/interactive.pm_.c:1124 +#: ../../diskdrake/interactive.pm_.c:1135 msgid "Encryption key (again)" msgstr "Krypteringsnøkkel (igjen)" @@ -2127,11 +2127,11 @@ msgstr "Endre type" msgid "Please click on a media" msgstr "Vennligst klikk på ett media" -#: ../../diskdrake/smbnfs_gtk.pm_.c:84 +#: ../../diskdrake/smbnfs_gtk.pm_.c:85 msgid "Export" msgstr "Eksporter" -#: ../../diskdrake/smbnfs_gtk.pm_.c:134 +#: ../../diskdrake/smbnfs_gtk.pm_.c:164 msgid "click here" msgstr "klikk her" @@ -2375,8 +2375,8 @@ msgstr "" #: ../../help.pm_.c:72 msgid "" -"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n" -"knows if a selected package is located on another CDROM and will eject the\n" +"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n" +"knows if a selected package is located on another CD-ROM and will eject the\n" "current CD and ask you to insert a different one as required." msgstr "" "Mandrake Linux installasjonen er spredd ut over flere CDROMer. DrakX \n" @@ -2390,21 +2390,19 @@ msgid "" "system. There are thousands of packages available for Mandrake Linux, and\n" "you are not supposed to know them all by heart.\n" "\n" -"If you are performing a standard installation from CDROM, you will first be\n" -"asked to specify the CDs you currently have (in Expert mode only). Check\n" +"If you are performing a standard installation from CD-ROM, you will first\n" +"be asked to specify the CDs you currently have (in Expert mode only). Check\n" "the CD labels and highlight the boxes corresponding to the CDs you have\n" "available for installation. Click \"OK\" when you are ready to continue.\n" "\n" "Packages are sorted in groups corresponding to a particular use of your\n" "machine. The groups themselves are sorted into four sections:\n" "\n" -" * \"Workstation\": if you plan to use your machine as a workstation, " -"select\n" -"one or more of the corresponding groups.\n" +" * \"Workstation\": if you plan to use your machine as a workstation,\n" +"select one or more of the corresponding groups.\n" "\n" -" * \"Development\": if the machine is to be used for programming, choose " -"the\n" -"desired group(s).\n" +" * \"Development\": if the machine is to be used for programming, choose\n" +"the desired group(s).\n" "\n" " * \"Server\": if the machine is intended to be a server, you will be able\n" "to select which of the most common services you wish to see installed on\n" @@ -2415,16 +2413,19 @@ msgid "" "to have a graphical workstation!\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" -"text about that group. If you do not select any group when performing a\n" -"regular installation (by opposition to an upgrade), a dialog will popup\n" -"proposing different kind of minimal installations:\n" +"text about that group. If you deselect all groups when performing a regular\n" +"installation (by opposition to an upgrade), a dialog will popup proposing\n" +"different options for a minimal installation:\n" "\n" -" * Will install the strict minimum necessary to get a working Linux system,\n" -"in command line only.\n" +" * \"With X\" Install the fewer packages possible for having a working\n" +"graphical desktop;\n" "\n" -" * Installs the base system plus basic utilities\n" +" * \"With basic documentation\" Installs the base system plus basic\n" +"utilities and their documentation. This installation is suitable for\n" +"setting up a server.\n" "\n" -" * Install the fewer packages possible for having a graphical desktop\n" +" * \"Truly minimal install\" Will install the strict minimum necessary to\n" +"get a working Linux system, in command line only.\n" "\n" "You can check the \"Individual package selection\" box, which is useful if\n" "you are familiar with the packages being offered or if you want to have\n" @@ -2479,7 +2480,7 @@ msgstr "" "alle grupper for å unngå installasjon av nye pakker. Det er brukbart for\n" "reparasjon eller oppdatering av ett eksisterende system." -#: ../../help.pm_.c:124 +#: ../../help.pm_.c:127 msgid "" "Finally, depending on your choice of whether or not to select individual\n" "packages, you will be presented a tree containing all packages classified\n" @@ -2517,7 +2518,7 @@ msgid "" "a floppy." msgstr "" -#: ../../help.pm_.c:160 +#: ../../help.pm_.c:163 msgid "" "If you wish to connect your computer to the Internet or to a local network,\n" "please choose the correct option. Please turn on your device before\n" @@ -2532,7 +2533,7 @@ msgid "" "all the parameters from your Internet Service Provider or system\n" "administrator.\n" "\n" -"You can consult the manual chapter about Internet connections for details\n" +"You can consult the manual chapter about internet connections for details\n" "about the configuration, or simply wait until your system is installed and\n" "use the program described there to configure your connection.\n" "\n" @@ -2540,7 +2541,7 @@ msgid "" "have finished configuring your network connection, click \"Cancel\"." msgstr "" -#: ../../help.pm_.c:181 +#: ../../help.pm_.c:184 msgid "" "You may now choose which services you wish to start at boot time.\n" "\n" @@ -2552,24 +2553,31 @@ msgid "" "specific service. However, if you are not sure whether a service is useful\n" "or not, it is safer to leave the default behavior.\n" "\n" -"At this stage, be very careful if you intend to use your machine as a\n" +"!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services that you do not\n" "need. Please remember that several services can be dangerous if they are\n" -"enabled on a server. In general, select only the services you really need." +"enabled on a server. In general, select only the services you really need.\n" +"!!" msgstr "" -#: ../../help.pm_.c:197 +#: ../../help.pm_.c:201 msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n" -"local time according to the time zone you selected." +"local time according to the time zone you selected. It is however possible\n" +"to deactivate this by deselcting \"Hardware clock set to GMT\" so that the\n" +"hardware clock is the same as the system clock. This is useful when the\n" +"machine is hosting another operating system like Windows.\n" +"\n" +"The \"Automatic time synchronization\" option will automatically regulate\n" +"the clock by connecting to a remote time server on the internet. In the\n" +"list that is presented, choose a server located near you. Of course you\n" +"must have a working internet connection for this feature to function." msgstr "" -"GNU/Linux håndterer tid i GMT (Greenwich Mean Time)\n" -"og oversetter denne til lokal tid ihht. den tidssonen du har valgt." -#: ../../help.pm_.c:201 +#: ../../help.pm_.c:213 msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" -"on which all the graphics environments (KDE, Gnome, AfterStep,\n" +"on which all the graphics environments (KDE, GNOME, AfterStep,\n" "WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n" "will try to configure X automatically.\n" "\n" @@ -2582,13 +2590,13 @@ msgid "" "wizard. See the corresponding section of the manual for more information\n" "about this wizard.\n" "\n" -"If you can see the message and answer \"Yes\", then DrakX will proceed to\n" -"the next step. If you cannot see the message, it simply means that the\n" -"configuration was wrong and the test will automatically end after 10\n" -"seconds, restoring the screen." +"If you can see the message during the test, and answer \"Yes\", then DrakX\n" +"will proceed to the next step. If you cannot see the message, it simply\n" +"means that the configuration was wrong and the test will automatically end\n" +"after 10 seconds, restoring the screen." msgstr "" -#: ../../help.pm_.c:221 +#: ../../help.pm_.c:233 msgid "" "The first time you try the X configuration, you may not be very satisfied\n" "with its display (screen is too small, shifted left or right...). Hence,\n" @@ -2602,7 +2610,7 @@ msgid "" "with any modern graphics card. Then choose \"Test again\" to be sure." msgstr "" -#: ../../help.pm_.c:233 +#: ../../help.pm_.c:245 msgid "" "Finally, you will be asked whether you want to see the graphical interface\n" "at boot. Note this question will be asked even if you chose not to test the\n" @@ -2611,24 +2619,22 @@ msgid "" "configured." msgstr "" -#: ../../help.pm_.c:240 +#: ../../help.pm_.c:252 msgid "" -"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n" -"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n" -"the prompt. But in case your computer cannot boot from the CDROM, you\n" +"The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n" +"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n" +"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n" "should come back to this step for help in at least two situations:\n" "\n" -" * when installing the boot loader, DrakX will rewrite the boot sector " -"(MBR)\n" -"of your main disk (unless you are using another boot manager) so that you\n" -"can start up with either Windows or GNU/Linux (assuming you have Windows in\n" -"your system). If you need to reinstall Windows, the Microsoft install\n" -"process will rewrite the boot sector, and then you will not be able to\n" -"start GNU/Linux!\n" -"\n" -" * if a problem arises and you cannot start up GNU/Linux from the hard " -"disk,\n" -"this floppy disk will be the only means of starting up GNU/Linux. It\n" +" * when installing the boot loader, DrakX will rewrite the boot sector\n" +"(MBR) of your main disk (unless you are using another boot manager) so that\n" +"you can start up with either Windows or GNU/Linux (assuming you have\n" +"Windows in your system). If you need to reinstall Windows, the Microsoft\n" +"install process will rewrite the boot sector, and then you will not be able\n" +"to start GNU/Linux!\n" +"\n" +" * if a problem arises and you cannot start up GNU/Linux from the hard\n" +"disk, this floppy disk will be the only means of starting up GNU/Linux. It\n" "contains a fair number of system tools for restoring a system, which has\n" "crashed due to a power failure, an unfortunate typing error, a typo in a\n" "password, or any other reason.\n" @@ -2639,7 +2645,7 @@ msgid "" "the whole disk." msgstr "" -#: ../../help.pm_.c:264 +#: ../../help.pm_.c:276 msgid "" "At this point you need to choose where on your hard drive to install your\n" "Mandrake Linux operating system. If your hard drive is empty or if an\n" @@ -2681,11 +2687,10 @@ msgid "" "be performed without the loss of any data. This solution is recommended if\n" "you want to use both Mandrake Linux and Microsoft Windows on same computer.\n" "\n" -" Before choosing this option, please understand that after this " -"procedure,\n" -"the size of your Microsoft Windows partition will be smaller than at the\n" -"present time. You will have less free space under Microsoft Windows to\n" -"store your data or to install new software.\n" +" Before choosing this option, please understand that after this\n" +"procedure, the size of your Microsoft Windows partition will be smaller\n" +"than at the present time. You will have less free space under Microsoft\n" +"Windows to store your data or to install new software.\n" "\n" " * \"Erase entire disk\": if you want to delete all data and all partitions\n" "present on your hard drive and replace them with your new Mandrake Linux\n" @@ -2706,7 +2711,7 @@ msgid "" "know what you are doing." msgstr "" -#: ../../help.pm_.c:328 +#: ../../help.pm_.c:340 msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to use. Just click \"OK\" to reboot the system. You can start\n" @@ -2730,7 +2735,7 @@ msgid "" " This feature is very handy when installing a great number of similar\n" "machines. See the Auto install section at our web site.\n" "\n" -" * \"Save packages selection\"(*) : saves the packages selection as made\n" +" * \"Save packages selection\"(*): saves the packages selection as made\n" "previously. Then, when doing another installation, insert the floppy inside\n" "the driver and run the installation going to the help screen by pressing on\n" "the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n" @@ -2739,7 +2744,7 @@ msgid "" "\"mformat a:\")" msgstr "" -#: ../../help.pm_.c:359 +#: ../../help.pm_.c:371 msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a file system).\n" @@ -2767,7 +2772,7 @@ msgid "" "for bad blocks on the disc." msgstr "" -#: ../../help.pm_.c:385 +#: ../../help.pm_.c:397 msgid "" "Your new Mandrake Linux operating system is currently being installed.\n" "Depending on the number of packages you will be installing and the speed of\n" @@ -2777,21 +2782,22 @@ msgid "" "Please be patient." msgstr "" -#: ../../help.pm_.c:393 +#: ../../help.pm_.c:405 msgid "" -"You may choose to upload updated packages that have been released after the\n" -"distribution has been made available. You will get security fixes or bug\n" -"fixes, but you need to have an Internet connection configured to proceed.\n" -"Answer \"Yes\" to the dialog to choose an available mirror. After choosing\n" -"a mirror, a packages selection tree appears to allow you to choose packages\n" -"individually, package that need to be updated are already selected, but you\n" -"may choose to install other package or deselect packages. Press \"Install\"\n" -"to install the updated package or \"Cancel\" not to upgrade them. (this\n" -"*REALLY* need to be modified according to real DrakX, if you need other\n" -"help section, let us (DrakX team developer) known)." +"At the time you are installing Mandrake Linux, it is likely that some\n" +"packages have been updated since the initial release. Some bugfixes may\n" +"have been fixed, and security issues solved. To allow you to benefit from\n" +"this updates you are now proposed to download them from the internet.\n" +"Choose \"Yes\" if you have a working intertnet connection, or \"No\" if you\n" +"prefer to install updated packages later.\n" +"\n" +"Choosing \"Yes\" displays a list of places from which updates can be\n" +"retrieved. Choose the one nearer to you. Then a packages selection tree\n" +"appears: review the selection, and press \"Install\" to retrieve and\n" +"install the selected package or \"Cancel\" to abort." msgstr "" -#: ../../help.pm_.c:405 +#: ../../help.pm_.c:418 #, fuzzy msgid "" "Before continuing you should read carefully the terms of the license. It\n" @@ -2805,7 +2811,7 @@ msgstr "" "med alt den sier, klikk på 'Jeg nekter' knappen. Det vil avsluttet\n" "installasjonen. For å fortsette installasjonen, klikk på 'Jeg aksepterer'." -#: ../../help.pm_.c:412 +#: ../../help.pm_.c:425 msgid "" "At this point, it is time to choose the security level desired for the\n" "machine. As a rule of thumb, the more exposed the machine is, and the more\n" @@ -2817,7 +2823,7 @@ msgid "" "If you do not know what to choose, keep the default option." msgstr "" -#: ../../help.pm_.c:422 +#: ../../help.pm_.c:435 #, fuzzy msgid "" "At this point, you need to choose what partition(s) will be used for the\n" @@ -2838,26 +2844,34 @@ msgid "" " * \"Auto allocate\": this option allows you to automatically create Ext2\n" "and swap partitions in free space of your hard drive.\n" "\n" -" * \"Rescue partition table\": if your partition table is damaged, you can\n" -"try to recover it using this option. Please be careful and remember that it\n" -"can fail.\n" +" * \"More\": gives access to additional features:\n" "\n" -" * \"Undo\": use this option to cancel your changes.\n" +" * \"Save partition table\": saves the partition table to a floppy.\n" +"Useful for later partition-table recovery if necessary. It is strongly\n" +"recommended to perform this step.\n" +"\n" +" * \"Restore partition table\": allows to restore a previously saved\n" +"partition table from floppy disk.\n" "\n" -" * \"Reload\": you can use this option if you wish to undo all changes and\n" -"load your initial partitions table.\n" +" * \"Rescue partition table\": if your partition table is damaged, you\n" +"can try to recover it using this option. Please be careful and remember\n" +"that it can fail.\n" "\n" -" * \"Wizard\": use this option if you wish to use a wizard to partition " -"your\n" -"hard drive. This is recommended if you do not have a good knowledge of\n" +" * \"Reload partition table\": discards all changes and load your\n" +"initial partitions table.\n" +"\n" +" * \"removable media automounting\": unchecking this option will force\n" +"users to manually mount and unmount removable medias such as floppies and\n" +"CD-ROMs.\n" +"\n" +" * \"Wizard\": use this option if you wish to use a wizard to partition\n" +"your hard drive. This is recommended if you do not have a good knowledge of\n" "partitioning.\n" "\n" -" * \"Restore from floppy\": this option will allow you to restore a\n" -"previously saved partition table from floppy disk.\n" +" * \"Undo\": use this option to cancel your changes.\n" "\n" -" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n" -"later partition-table recovery if necessary. It is strongly recommended to\n" -"perform this step.\n" +" * \"Toggle to normal/expert mode\": allows additional actions on\n" +"partitions (Type, options, format) and gives more information.\n" "\n" " * \"Done\": when you have finished partitioning your hard drive, this will\n" "save your changes back to disc.\n" @@ -2873,6 +2887,9 @@ msgid "" "\n" " * Ctrl-m to set the mount point.\n" "\n" +"To get information about the different filesystem types available, pease\n" +"read the chapter ext2fs from the ``Reference Manual''.\n" +"\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n" "boot loader. If you opt to make the partition a bit larger, say 50MB, you\n" @@ -2958,7 +2975,7 @@ msgstr "" "laoss si 50 MB, så kan du kanskje lagre en ekstra kjene og ramdiskbilde for " "nødsituasjoner." -#: ../../help.pm_.c:481 +#: ../../help.pm_.c:506 msgid "" "More than one Microsoft Windows partition has been detected on your hard\n" "drive. Please choose the one you want to resize in order to install your\n" @@ -3027,36 +3044,33 @@ msgstr "" "disken\n" "eller partisjonen er kalt \"C:\")." -#: ../../help.pm_.c:512 +#: ../../help.pm_.c:537 msgid "Please be patient. This operation can take several minutes." msgstr "Vær tålmodig. Denne operasjonen kan ta flere minutter." -#: ../../help.pm_.c:515 +#: ../../help.pm_.c:540 msgid "" "DrakX now needs to know if you want to perform a default (\"Recommended\")\n" "installation or if you want to have greater control (\"Expert\"). You also\n" "have the choice of performing a new install or an upgrade of an existing\n" "Mandrake Linux system:\n" "\n" -" * completely wipes out the old system;\n" -"\n" -" *\n" -"\n" -" *\n" +" * \"Install\" Completely wipes out the old system. In fact, depending on\n" +"what currently holds your machine, you will be able to keep some old (Linux\n" +"or other) partitions unchanged.\n" "\n" -"On the other hand, \"Upgrade\" allows you to upgrade an existing system.\n" -"Finally, Select \"Upgrade packages only\" if you wish to upgrade the\n" -"packages of a previous installation, without any other modification.\n" +" * \"Upgrade\" This installation class allows to simply update the packages\n" +"currently installed on your Mandrake Linux system. It keeps the current\n" +"partitions of your hard drives as well as users configuration. All other\n" +"configuration steps remain available with respect to plain installation.\n" "\n" -"Please choose \"Install\" if there are no previous version of Mandrake\n" -"Linux installed or if you wish to boot between various operating systems.\n" -"\n" -"Please choose \"Upgrade\" if you wish to update or repair an already\n" -"installed version of Mandrake Linux. Please choose \"Upgrade packages\n" -"only\" not to modify configuration parameters.\n" +" * \"Upgrade Packages Only\" This brand new class allows to upgrade an\n" +"existing Mandrake Linux system while keeping all system configuration\n" +"unchanged. Adding new packages to the current installation will be also\n" +"possible.\n" "\n" -"Depending on your knowledge of GNU/Linux, please choose one of the\n" -"following to install or update your Mandrake Linux operating system:\n" +"Depending on your knowledge of GNU/Linux, select one of the following\n" +"choices:\n" "\n" " * Recommended: choose this if you have never installed a GNU/Linux\n" "operating system. The installation will be very easy and you will only be\n" @@ -3069,7 +3083,7 @@ msgid "" "this unless you know what you are doing." msgstr "" -#: ../../help.pm_.c:551 +#: ../../help.pm_.c:573 msgid "" "Normally, DrakX selects the right keyboard for you (depending on the\n" "language you have chosen) and you will not even see this step. However, you\n" @@ -3084,7 +3098,7 @@ msgid "" "supported keyboards." msgstr "" -#: ../../help.pm_.c:564 +#: ../../help.pm_.c:586 msgid "" "Please choose your preferred language for installation and system usage.\n" "\n" @@ -3099,7 +3113,7 @@ msgid "" "additional locales click the \"OK\" button to continue." msgstr "" -#: ../../help.pm_.c:577 +#: ../../help.pm_.c:599 msgid "" "By default, DrakX assumes you have a two-button mouse and will set it up\n" "for third-button emulation. DrakX will automatically know whether it is a\n" @@ -3111,18 +3125,19 @@ msgid "" "If you choose a mouse other than the default you will be presented with a\n" "mouse test screen. Use the buttons and wheel to verify that the settings\n" "are good. If the mouse is not working correctly press the space bar or\n" -"RETURN to \"Cancel\" and choose again." +"[Return] to \"Cancel\" and choose again." msgstr "" -#: ../../help.pm_.c:590 +#: ../../help.pm_.c:612 +#, fuzzy msgid "" -"Please select the correct port. For example, the COM1 port under MS Windows\n" -"is named ttyS0 under GNU/Linux." +"Please select the correct port. For example, the \"COM1\" port under\n" +"Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "Vennligst velg den riktige porten. F.eks., COM1 porten\n" "under MS Windows blir kalt ttyS0 i GNU/Linux." -#: ../../help.pm_.c:594 +#: ../../help.pm_.c:616 msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you have to enter the \"root\" password. \"root\" is the system\n" @@ -3160,29 +3175,29 @@ msgid "" "want to choose \"Local files\" for authentication." msgstr "" -#: ../../help.pm_.c:630 +#: ../../help.pm_.c:652 msgid "" -"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n" +"LILO and grub are boot loaders for GNU/Linux. This stage, normally, is\n" "totally automated. In fact, DrakX analyzes the disk boot sector and acts\n" "accordingly, depending on what it finds here:\n" "\n" -" * if Windows boot sector is found, it will replace it with a GRUB/LILO " -"boot\n" -"sector. Hence, you will be able to load either GNU/Linux or another OS;\n" +" * if a Windows boot sector is found, it will replace it with a grub/LILO\n" +"boot sector. Hence, you will be able to load either GNU/Linux or another\n" +"OS;\n" "\n" -" * if a GRUB or LILO boot sector is found, it will replace it with a new\n" +" * if a grub or LILO boot sector is found, it will replace it with a new\n" "one;\n" "\n" "If in doubt, DrakX will display a dialog with various options.\n" "\n" " * \"Boot loader to use\": you have three choices:\n" "\n" +" * \"GRUB\": if you prefer grub (text menu).\n" +"\n" " * \"LILO with graphical menu\": if you prefer LILO with its graphical\n" "interface.\n" "\n" -" * \"GRUB\": if you prefer GRUB (text menu).\n" -"\n" -" * \"LILO with text menu\": if you prefer LILO with its text menu " +" * \"LILO with text menu\": if you prefer LILO with its text menu\n" "interface.\n" "\n" " * \"Boot device\": in most cases, you will not change the default\n" @@ -3201,19 +3216,20 @@ msgid "" "Clicking the \"Advanced\" button in this dialog will offer many advanced\n" "options, which are reserved to the expert user.\n" "\n" -"Mandrake Linux installs its own boot loader, which will let you boot either\n" -"GNU/Linux or any other operating systems which you have on your system.\n" +"After you have configured the general bootloader parameters, you are\n" +"presented the list of boot options that will be available at boot time.\n" "\n" "If there is another operating system installed on your machine, it will be\n" "automatically added to the boot menu. Here, you can choose to fine-tune the\n" -"existing options. Double-clicking on an existing entry allows you to change\n" -"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n" -"on to the next installation step." +"existing options. Select an entry and click \"Modify\" to modify or remove\n" +"it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n" +"installation step." msgstr "" -#: ../../help.pm_.c:677 +#: ../../help.pm_.c:701 +#, fuzzy msgid "" -"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n" +"LILO (the LInux LOader) and grub are boot loaders: they are able to boot\n" "either GNU/Linux or any other operating system present on your computer.\n" "Normally, these other operating systems are correctly detected and\n" "installed. If this is not the case, you can add an entry by hand in this\n" @@ -3234,7 +3250,7 @@ msgstr "" "andre kan du fjerne linjene for disse. Men i så tilfelle trenger du\n" "en oppstartsdiskett for å starte disse!" -#: ../../help.pm_.c:688 +#: ../../help.pm_.c:712 msgid "" "You must indicate where you wish to place the information required to boot\n" "to GNU/Linux.\n" @@ -3248,14 +3264,13 @@ msgstr "" "Med mindre du vet akkurat hva du gjør, velg \"Første sektor av\n" "disken (MBR)\"." -#: ../../help.pm_.c:695 +#: ../../help.pm_.c:719 msgid "" "Here we select a printing system for your computer to use. Other OSes may\n" "offer you one, but Mandrake offers three.\n" "\n" -" * \"pdq\" - which means ``print, don't queue'', is the choice if you have " -"a\n" -"direct connection to your printer and you want to be able to panic out of\n" +" * \"pdq\" - which means ``print, don't queue'', is the choice if you have\n" +"a direct connection to your printer and you want to be able to panic out of\n" "printer jams, and you do not have any networked printers. It will handle\n" "only very simple network cases and is somewhat slow for networks. Pick\n" "\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n" @@ -3279,7 +3294,7 @@ msgid "" "networks." msgstr "" -#: ../../help.pm_.c:723 +#: ../../help.pm_.c:747 msgid "" "DrakX is now detecting any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n" @@ -3308,7 +3323,8 @@ msgid "" "on your system)." msgstr "" -#: ../../help.pm_.c:750 +#: ../../help.pm_.c:774 +#, fuzzy msgid "" "You can add additional entries for yaboot, either for other operating\n" "systems, alternate kernels, or for an emergency boot image.\n" @@ -3317,9 +3333,8 @@ msgid "" "\n" "For Linux, there are a few possible options:\n" "\n" -" * Label: this is simply the name you will have to type at the yaboot " -"prompt\n" -"to select this boot option.\n" +" * Label: this is simply the name you will have to type at the yaboot\n" +"prompt to select this boot option.\n" "\n" " * Image: this would be the name of the kernel to boot. Typically, vmlinux\n" "or a variation of vmlinux with an extension.\n" @@ -3331,7 +3346,7 @@ msgid "" "button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n" "Apple mouse. The following are some examples:\n" "\n" -" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 " +" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" @@ -3425,7 +3440,8 @@ msgstr "" "with a '*', if you\n" "press TAB to see the boot selections." -#: ../../help.pm_.c:795 +#: ../../help.pm_.c:820 +#, fuzzy msgid "" "Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n" "either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n" @@ -3438,9 +3454,8 @@ msgid "" " * Init Message: a simple text message that is displayed before the boot\n" "prompt.\n" "\n" -" * Boot Device: indicate where you want to place the information required " -"to\n" -"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n" +" * Boot Device: indicate where you want to place the information required\n" +"to boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n" "hold this information.\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" @@ -3454,9 +3469,8 @@ msgid "" " * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n" "at the first boot prompt.\n" "\n" -" * Enable OF Boot?: checking this option allows you to choose \"N\" for " -"Open\n" -"Firmware at the first boot prompt.\n" +" * Enable OF Boot?: checking this option allows you to choose \"N\" for\n" +"Open Firmware at the first boot prompt.\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." @@ -3503,7 +3517,7 @@ msgstr "" " - Standard OS: Du kan velge hvilket OS som skal lastes når\n" "Open Firmwareforsinkelsen er utløpt." -#: ../../help.pm_.c:828 +#: ../../help.pm_.c:853 msgid "" "Here are presented various parameters concerning your machine. Depending on\n" "your installed hardware, you may - or not, see the following entries:\n" @@ -3514,12 +3528,11 @@ msgid "" " * \"Keyboard\": check the current keyboard map configuration and click on\n" "the button to change that if necessary.\n" "\n" -" * \"Timezone\": DrakX, by default, guesses your time zone from the " -"language\n" -"you have chosen. But here again, as for the choice of a keyboard, you may\n" -"not be in the country for which the chosen language should correspond.\n" -"Hence, you may need to click on the \"Timezone\" button in order to\n" -"configure the clock according to the time zone you are in.\n" +" * \"Timezone\": DrakX, by default, guesses your time zone from the\n" +"language you have chosen. But here again, as for the choice of a keyboard,\n" +"you may not be in the country for which the chosen language should\n" +"correspond. Hence, you may need to click on the \"Timezone\" button in\n" +"order to configure the clock according to the time zone you are in.\n" "\n" " * \"Printer\": clicking on the \"No Printer\" button will open the printer\n" "configuration wizard.\n" @@ -3535,7 +3548,7 @@ msgid "" "associated to it." msgstr "" -#: ../../help.pm_.c:857 +#: ../../help.pm_.c:882 #, fuzzy msgid "" "Choose the hard drive you want to erase to install your new Mandrake Linux\n" @@ -3546,7 +3559,7 @@ msgstr "" "nye Mandrake Linux partisjon. Vær forsiktig, alle data på denne vil gå tapt\n" "og kan ikke bli gjenopprettet." -#: ../../help.pm_.c:862 +#: ../../help.pm_.c:887 #, fuzzy msgid "" "Click on \"OK\" if you want to delete all data and partitions present on\n" @@ -3606,16 +3619,16 @@ msgstr "" msgid "Can't use broadcast with no NIS domain" msgstr "Kan ikke bruke broadcast med intet NIS domene" -#: ../../install_any.pm_.c:784 +#: ../../install_any.pm_.c:785 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "Sett inn en FAT-formatert diskett i stasjon %s" -#: ../../install_any.pm_.c:788 +#: ../../install_any.pm_.c:789 msgid "This floppy is not FAT formatted" msgstr "Denne disketten er ikke FAT-formatert" -#: ../../install_any.pm_.c:800 +#: ../../install_any.pm_.c:801 msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" @@ -3623,17 +3636,17 @@ msgstr "" "For å bruke dette valget av pakker, start installasjonen med'linux " "defcfg=floppy'" -#: ../../install_any.pm_.c:822 ../../partition_table.pm_.c:763 +#: ../../install_any.pm_.c:823 ../../partition_table.pm_.c:763 #, c-format msgid "Error reading file %s" msgstr "Feil ved lesing av fil %s" #: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:327 -#: ../../interactive.pm_.c:118 ../../interactive.pm_.c:133 -#: ../../interactive.pm_.c:307 ../../interactive.pm_.c:339 +#: ../../interactive.pm_.c:119 ../../interactive.pm_.c:134 +#: ../../interactive.pm_.c:309 ../../interactive.pm_.c:341 #: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170 #: ../../interactive_stdio.pm_.c:141 ../../interactive_stdio.pm_.c:142 -#: ../../my_gtk.pm_.c:669 ../../my_gtk.pm_.c:1002 ../../my_gtk.pm_.c:1024 +#: ../../my_gtk.pm_.c:679 ../../my_gtk.pm_.c:1012 ../../my_gtk.pm_.c:1034 #: ../../standalone/drakbackup_.c:2285 ../../standalone/drakbackup_.c:2356 #: ../../standalone/drakbackup_.c:2372 msgid "Ok" @@ -3867,12 +3880,12 @@ msgstr "" "Sjekk cd-platen på en installert maskin med \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" -#: ../../install_steps.pm_.c:459 +#: ../../install_steps.pm_.c:450 #, c-format msgid "Welcome to %s" msgstr "Velkommen til %s" -#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:746 +#: ../../install_steps.pm_.c:498 ../../install_steps.pm_.c:738 msgid "No floppy drive available" msgstr "Ingen diskettstasjon tilgjengelig" @@ -5156,23 +5169,23 @@ msgid "" msgstr "" " / mellom elementer | velger | neste skjerm " -#: ../../interactive.pm_.c:84 +#: ../../interactive.pm_.c:86 msgid "kdesu missing" msgstr "kdesu mangler" -#: ../../interactive.pm_.c:143 +#: ../../interactive.pm_.c:144 msgid "Choose a file" msgstr "Velg en fil" -#: ../../interactive.pm_.c:304 +#: ../../interactive.pm_.c:306 msgid "Advanced" msgstr "Avansert" -#: ../../interactive.pm_.c:305 +#: ../../interactive.pm_.c:307 msgid "Basic" msgstr "" -#: ../../interactive.pm_.c:376 +#: ../../interactive.pm_.c:378 msgid "Please wait" msgstr "Vennligst vent" @@ -5681,23 +5694,23 @@ msgstr "BEVEG HJULET DITT!" msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*" msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" -#: ../../my_gtk.pm_.c:634 +#: ../../my_gtk.pm_.c:644 msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" -#: ../../my_gtk.pm_.c:669 +#: ../../my_gtk.pm_.c:679 msgid "Finish" msgstr "Avslutt" -#: ../../my_gtk.pm_.c:669 ../../printerdrake.pm_.c:1545 +#: ../../my_gtk.pm_.c:679 ../../printerdrake.pm_.c:1545 msgid "Next ->" msgstr "Neste ->" -#: ../../my_gtk.pm_.c:670 ../../printerdrake.pm_.c:1543 +#: ../../my_gtk.pm_.c:680 ../../printerdrake.pm_.c:1543 msgid "<- Previous" msgstr "<- Forrige" -#: ../../my_gtk.pm_.c:1002 +#: ../../my_gtk.pm_.c:1012 msgid "Is this correct?" msgstr "Er dette riktig?" @@ -6694,7 +6707,7 @@ msgstr "" #: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1702 #: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:2628 #: ../../standalone/drakbackup_.c:753 ../../standalone/drakbackup_.c:2445 -#: ../../standalone/drakfont_.c:573 ../../standalone/drakfont_.c:763 +#: ../../standalone/drakfont_.c:577 ../../standalone/drakfont_.c:771 msgid "Close" msgstr "Lukk" @@ -8485,7 +8498,7 @@ msgid "(!) Error during mail sending. \n" msgstr "" #: ../../standalone/drakbackup_.c:727 ../../standalone/drakbackup_.c:738 -#: ../../standalone/drakbackup_.c:749 ../../standalone/drakfont_.c:759 +#: ../../standalone/drakbackup_.c:749 ../../standalone/drakfont_.c:767 #, fuzzy msgid "File Selection" msgstr "Pakkevalg" @@ -8536,7 +8549,7 @@ msgstr "" msgid "Use Incremental Backups (do not replace old backups)" msgstr "" -#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:799 +#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:807 #, fuzzy msgid "Remove Selected" msgstr "Fjern inngang" @@ -9371,104 +9384,104 @@ msgstr "" msgid "Installation of LILO failed. The following error occured:" msgstr "Installasjon av LILO mislykket. Følgende feil oppsto:" -#: ../../standalone/drakfont_.c:224 +#: ../../standalone/drakfont_.c:228 msgid "Search installed fonts" msgstr "" -#: ../../standalone/drakfont_.c:226 +#: ../../standalone/drakfont_.c:230 msgid "Unselect fonts installed" msgstr "" -#: ../../standalone/drakfont_.c:247 +#: ../../standalone/drakfont_.c:251 msgid "parse all fonts" msgstr "" -#: ../../standalone/drakfont_.c:248 +#: ../../standalone/drakfont_.c:252 #, fuzzy msgid "no fonts found" msgstr "ingen nettverkskort funnet" -#: ../../standalone/drakfont_.c:256 ../../standalone/drakfont_.c:298 -#: ../../standalone/drakfont_.c:347 ../../standalone/drakfont_.c:404 -#: ../../standalone/drakfont_.c:410 ../../standalone/drakfont_.c:436 -#: ../../standalone/drakfont_.c:448 ../../standalone/drakfont_.c:461 +#: ../../standalone/drakfont_.c:260 ../../standalone/drakfont_.c:302 +#: ../../standalone/drakfont_.c:351 ../../standalone/drakfont_.c:408 +#: ../../standalone/drakfont_.c:414 ../../standalone/drakfont_.c:440 +#: ../../standalone/drakfont_.c:452 ../../standalone/drakfont_.c:465 #, fuzzy msgid "done" msgstr "Ferdig" -#: ../../standalone/drakfont_.c:260 +#: ../../standalone/drakfont_.c:264 msgid "could not find any font in your mounted partitions" msgstr "" -#: ../../standalone/drakfont_.c:296 +#: ../../standalone/drakfont_.c:300 msgid "Reselect correct fonts" msgstr "" -#: ../../standalone/drakfont_.c:299 +#: ../../standalone/drakfont_.c:303 msgid "could not find any font.\n" msgstr "" -#: ../../standalone/drakfont_.c:322 +#: ../../standalone/drakfont_.c:326 msgid "Search fonts in installed list" msgstr "" -#: ../../standalone/drakfont_.c:345 +#: ../../standalone/drakfont_.c:349 #, fuzzy msgid "Fonts copy" msgstr "Formater diskett" -#: ../../standalone/drakfont_.c:348 +#: ../../standalone/drakfont_.c:352 #, fuzzy msgid "True Type fonts installation" msgstr "Forbereder installasjon" -#: ../../standalone/drakfont_.c:351 +#: ../../standalone/drakfont_.c:355 msgid "please wait during ttmkfdir..." msgstr "" -#: ../../standalone/drakfont_.c:353 +#: ../../standalone/drakfont_.c:357 msgid "True Type install done" msgstr "" -#: ../../standalone/drakfont_.c:360 ../../standalone/drakfont_.c:376 +#: ../../standalone/drakfont_.c:364 ../../standalone/drakfont_.c:380 msgid "Fonts conversion" msgstr "" -#: ../../standalone/drakfont_.c:364 ../../standalone/drakfont_.c:380 -#: ../../standalone/drakfont_.c:400 +#: ../../standalone/drakfont_.c:368 ../../standalone/drakfont_.c:384 +#: ../../standalone/drakfont_.c:404 msgid "type1inst building" msgstr "" -#: ../../standalone/drakfont_.c:369 ../../standalone/drakfont_.c:384 +#: ../../standalone/drakfont_.c:373 ../../standalone/drakfont_.c:388 msgid "Ghostscript referencing" msgstr "" -#: ../../standalone/drakfont_.c:391 +#: ../../standalone/drakfont_.c:395 msgid "ttf fonts conversion" msgstr "" -#: ../../standalone/drakfont_.c:395 +#: ../../standalone/drakfont_.c:399 msgid "pfm fonts conversion" msgstr "" -#: ../../standalone/drakfont_.c:405 +#: ../../standalone/drakfont_.c:409 msgid "Suppress temporary Files" msgstr "" -#: ../../standalone/drakfont_.c:408 +#: ../../standalone/drakfont_.c:412 msgid "Restart XFS" msgstr "" -#: ../../standalone/drakfont_.c:446 ../../standalone/drakfont_.c:456 +#: ../../standalone/drakfont_.c:450 ../../standalone/drakfont_.c:460 msgid "Suppress Fonts Files" msgstr "" -#: ../../standalone/drakfont_.c:458 +#: ../../standalone/drakfont_.c:462 #, fuzzy msgid "xfs restart" msgstr "begrense" -#: ../../standalone/drakfont_.c:465 +#: ../../standalone/drakfont_.c:469 msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" @@ -9477,118 +9490,118 @@ msgid "" "may hang up your X Server." msgstr "" -#: ../../standalone/drakfont_.c:540 +#: ../../standalone/drakfont_.c:544 #, fuzzy msgid "Fonts Importation" msgstr "Formater partisjoner" -#: ../../standalone/drakfont_.c:558 +#: ../../standalone/drakfont_.c:562 msgid "Get Windows Fonts" msgstr "" -#: ../../standalone/drakfont_.c:560 +#: ../../standalone/drakfont_.c:564 #, fuzzy msgid "Advanced Options" msgstr "LAN-konfigurasjon" -#: ../../standalone/drakfont_.c:562 +#: ../../standalone/drakfont_.c:566 msgid "Uninstall Fonts" msgstr "" -#: ../../standalone/drakfont_.c:564 +#: ../../standalone/drakfont_.c:568 #, fuzzy msgid "Font List" msgstr "Monteringspunkt" -#: ../../standalone/drakfont_.c:569 +#: ../../standalone/drakfont_.c:573 #, fuzzy msgid "About" msgstr "Avbryt" -#: ../../standalone/drakfont_.c:571 +#: ../../standalone/drakfont_.c:575 msgid " Help " msgstr "" -#: ../../standalone/drakfont_.c:711 +#: ../../standalone/drakfont_.c:719 #, fuzzy msgid "Choose the applications that will support the fonts :" msgstr "Velg partisjonene du ønsker å partisjonere" -#: ../../standalone/drakfont_.c:715 +#: ../../standalone/drakfont_.c:723 msgid "Ghostscript" msgstr "" -#: ../../standalone/drakfont_.c:719 +#: ../../standalone/drakfont_.c:727 #, fuzzy msgid "StarOffice" msgstr "Office" -#: ../../standalone/drakfont_.c:723 +#: ../../standalone/drakfont_.c:731 #, fuzzy msgid "Abiword" msgstr "Avbryt" -#: ../../standalone/drakfont_.c:727 +#: ../../standalone/drakfont_.c:735 #, fuzzy msgid "Generic Printers" msgstr "Skriver" -#: ../../standalone/drakfont_.c:764 +#: ../../standalone/drakfont_.c:772 msgid "Select the font file or directory and click on 'Add'" msgstr "" -#: ../../standalone/drakfont_.c:800 +#: ../../standalone/drakfont_.c:808 #, fuzzy msgid "Install List" msgstr "Installer systemet" -#: ../../standalone/drakfont_.c:830 +#: ../../standalone/drakfont_.c:838 msgid "click here if you are sure." msgstr "" -#: ../../standalone/drakfont_.c:832 +#: ../../standalone/drakfont_.c:840 msgid "here if no." msgstr "" -#: ../../standalone/drakfont_.c:869 +#: ../../standalone/drakfont_.c:877 msgid "Unselected All" msgstr "" -#: ../../standalone/drakfont_.c:871 +#: ../../standalone/drakfont_.c:879 #, fuzzy msgid "Selected All" msgstr "Velg fil" -#: ../../standalone/drakfont_.c:873 +#: ../../standalone/drakfont_.c:881 #, fuzzy msgid "Remove List" msgstr "Fjern skriver" -#: ../../standalone/drakfont_.c:891 ../../standalone/drakfont_.c:911 +#: ../../standalone/drakfont_.c:899 ../../standalone/drakfont_.c:919 #, fuzzy msgid "Initials tests" msgstr "Initmelding" -#: ../../standalone/drakfont_.c:892 +#: ../../standalone/drakfont_.c:900 #, fuzzy msgid "Copy fonts on your system" msgstr "Ikke noe nettverksadapter i systemet ditt!" -#: ../../standalone/drakfont_.c:893 +#: ../../standalone/drakfont_.c:901 msgid "Install & convert Fonts" msgstr "" -#: ../../standalone/drakfont_.c:894 +#: ../../standalone/drakfont_.c:902 #, fuzzy msgid "Post Install" msgstr "Installer" -#: ../../standalone/drakfont_.c:912 +#: ../../standalone/drakfont_.c:920 #, fuzzy msgid "Remove fonts on your system" msgstr "Ikke noe nettverksadapter i systemet ditt!" -#: ../../standalone/drakfont_.c:913 +#: ../../standalone/drakfont_.c:921 #, fuzzy msgid "Post Uninstall" msgstr "Avslutt installering" @@ -10071,85 +10084,85 @@ msgstr "Kontrollpanel" msgid "Choose the tool you want to use" msgstr "Velg verktøyet du ønsker å bruke" -#: ../../standalone/drakxtv_.c:35 +#: ../../standalone/drakxtv_.c:37 #, fuzzy msgid "Canada (cable)" msgstr "Canadisk (Quebec)" -#: ../../standalone/drakxtv_.c:35 +#: ../../standalone/drakxtv_.c:37 msgid "USA (bcast)" msgstr "" -#: ../../standalone/drakxtv_.c:35 +#: ../../standalone/drakxtv_.c:37 msgid "USA (cable)" msgstr "" -#: ../../standalone/drakxtv_.c:35 +#: ../../standalone/drakxtv_.c:37 msgid "USA (cable-hrc)" msgstr "" -#: ../../standalone/drakxtv_.c:36 +#: ../../standalone/drakxtv_.c:38 msgid "China (bcast)" msgstr "" -#: ../../standalone/drakxtv_.c:36 +#: ../../standalone/drakxtv_.c:38 msgid "Japan (bcast)" msgstr "" -#: ../../standalone/drakxtv_.c:36 +#: ../../standalone/drakxtv_.c:38 msgid "Japan (cable)" msgstr "" -#: ../../standalone/drakxtv_.c:37 +#: ../../standalone/drakxtv_.c:39 msgid "East Europe" msgstr "" -#: ../../standalone/drakxtv_.c:37 +#: ../../standalone/drakxtv_.c:39 #, fuzzy msgid "Ireland" msgstr "Islansk" -#: ../../standalone/drakxtv_.c:37 +#: ../../standalone/drakxtv_.c:39 msgid "West Europe" msgstr "" -#: ../../standalone/drakxtv_.c:38 +#: ../../standalone/drakxtv_.c:40 #, fuzzy msgid "Australia" msgstr "Østerrike" -#: ../../standalone/drakxtv_.c:38 +#: ../../standalone/drakxtv_.c:40 #, fuzzy msgid "Newzealand" msgstr "Netherlands" -#: ../../standalone/drakxtv_.c:39 -msgid "Southafrica" +#: ../../standalone/drakxtv_.c:41 +msgid "South Africa" msgstr "" -#: ../../standalone/drakxtv_.c:40 +#: ../../standalone/drakxtv_.c:42 msgid "Argentina" msgstr "" -#: ../../standalone/drakxtv_.c:60 +#: ../../standalone/drakxtv_.c:45 msgid "" "Please,\n" "type in your tv norm and country" msgstr "" -#: ../../standalone/drakxtv_.c:62 +#: ../../standalone/drakxtv_.c:47 msgid "TV norm :" msgstr "" -#: ../../standalone/drakxtv_.c:63 +#: ../../standalone/drakxtv_.c:48 msgid "Area :" msgstr "" -#: ../../standalone/drakxtv_.c:67 +#: ../../standalone/drakxtv_.c:52 msgid "Scanning for TV channels in progress ..." msgstr "" -#: ../../standalone/drakxtv_.c:70 +#: ../../standalone/drakxtv_.c:60 msgid "Scanning for TV channels" msgstr "" @@ -10926,6 +10939,13 @@ msgstr "Multimedia - CD-brenning" msgid "Scientific Workstation" msgstr "Vitenskaplig arbeidsstasjon" +#~ msgid "" +#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n" +#~ "local time according to the time zone you selected." +#~ msgstr "" +#~ "GNU/Linux håndterer tid i GMT (Greenwich Mean Time)\n" +#~ "og oversetter denne til lokal tid ihht. den tidssonen du har valgt." + #~ msgid "Connect to Internet" #~ msgstr "Koble opp mot Internett" -- cgit v1.2.1