From d450fbdc255f0fa46e2512e35b4430e04fce1ac3 Mon Sep 17 00:00:00 2001
From: Thierry Vignaud <tv@mageia.org>
Date: Sat, 6 Apr 2013 01:32:37 +0000
Subject: sync with code

---
 perl-install/share/po/hi.po | 463 +++++++++++++++++++++++++-------------------
 1 file changed, 261 insertions(+), 202 deletions(-)

(limited to 'perl-install/share/po/hi.po')

diff --git a/perl-install/share/po/hi.po b/perl-install/share/po/hi.po
index 51aec9974..2ea837795 100644
--- a/perl-install/share/po/hi.po
+++ b/perl-install/share/po/hi.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX-hi\n"
-"POT-Creation-Date: 2012-12-14 15:17+0100\n"
+"POT-Creation-Date: 2013-04-06 03:21+0200\n"
 "PO-Revision-Date: 2004-04-04 21:54+0530\n"
 "Last-Translator: धनञ्जय शर्मा (Dhananjaya Sharma) <dysxhi@yahoo.co.in>\n"
 "Language-Team: हिन्दी (Hindi) <dysxhi@yahoo.co.in>\n"
@@ -15,7 +15,7 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: KBabel 1.3\n"
 
-#: any.pm:261 any.pm:971 diskdrake/interactive.pm:645
+#: any.pm:255 any.pm:964 diskdrake/interactive.pm:645
 #: diskdrake/interactive.pm:869 diskdrake/interactive.pm:931
 #: diskdrake/interactive.pm:1036 diskdrake/interactive.pm:1266
 #: diskdrake/interactive.pm:1324 do_pkgs.pm:242 do_pkgs.pm:287
@@ -24,12 +24,12 @@ msgstr ""
 msgid "Please wait"
 msgstr "कृपया प्रतीक्षा करें"
 
-#: any.pm:261
+#: any.pm:255
 #, c-format
 msgid "Bootloader installation in progress"
 msgstr "बूटलोडर का संसाधन प्रगति पर है"
 
-#: any.pm:272
+#: any.pm:266
 #, c-format
 msgid ""
 "LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
@@ -40,12 +40,12 @@ msgid ""
 "Assign a new Volume ID?"
 msgstr ""
 
-#: any.pm:283
+#: any.pm:277
 #, c-format
 msgid "Installation of bootloader failed. The following error occurred:"
 msgstr "बूटलोडर का संसाधन असफ़ल । निम्नलिखित त्रुटि उत्पन्न हो गयी है:"
 
-#: any.pm:289
+#: any.pm:283
 #, c-format
 msgid ""
 "You may need to change your Open Firmware boot-device to\n"
@@ -61,7 +61,7 @@ msgstr ""
 "और इस निर्देश को इन्टर करें: setenv boot-device %s,\\\\:tbxi और फ़िर\n"
 "टाइप करें: shut-down । आपके आगामी बूट पर आप बूटलोडर प्रॉम्ट को देख सकेगें ।"
 
-#: any.pm:329
+#: any.pm:323
 #, c-format
 msgid ""
 "You decided to install the bootloader on a partition.\n"
@@ -76,268 +76,268 @@ msgstr ""
 "\n"
 "आप किस ड्राइव से बूट करते है?"
 
-#: any.pm:340
+#: any.pm:334
 #, fuzzy, c-format
 msgid "Bootloader Installation"
 msgstr "बूटलोडर का संसाधन प्रगति पर है"
 
-#: any.pm:344
+#: any.pm:338
 #, c-format
 msgid "Where do you want to install the bootloader?"
 msgstr "बूटलोडर को आप कहाँ संसाधित करना चाहते है ?"
 
-#: any.pm:368
+#: any.pm:362
 #, fuzzy, c-format
 msgid "First sector (MBR) of drive %s"
 msgstr "ड्राइव का प्रथम सेक्टर (मास्टर बूट रिकार्ड)"
 
-#: any.pm:370
+#: any.pm:364
 #, c-format
 msgid "First sector of drive (MBR)"
 msgstr "ड्राइव का प्रथम सेक्टर (मास्टर बूट रिकार्ड)"
 
-#: any.pm:372
+#: any.pm:366
 #, c-format
 msgid "First sector of the root partition"
 msgstr "रूट विभाजन के प्रथम सेक्टर"
 
-#: any.pm:374
+#: any.pm:368
 #, c-format
 msgid "On Floppy"
 msgstr "फ़्लापी पर"
 
-#: any.pm:376 pkgs.pm:283 ugtk2.pm:526
+#: any.pm:370 pkgs.pm:283 ugtk2.pm:526
 #, c-format
 msgid "Skip"
 msgstr "छोड़े"
 
-#: any.pm:411
+#: any.pm:405
 #, c-format
 msgid "Boot Style Configuration"
 msgstr "बूट शैली संरचना"
 
-#: any.pm:427 any.pm:460 any.pm:461
+#: any.pm:420 any.pm:453 any.pm:454
 #, c-format
 msgid "Bootloader main options"
 msgstr "बूटलोडर के मुख्य विकल्प"
 
-#: any.pm:431
+#: any.pm:424
 #, c-format
 msgid "Bootloader"
 msgstr "बूटलोडर"
 
-#: any.pm:432 any.pm:464
+#: any.pm:425 any.pm:457
 #, c-format
 msgid "Bootloader to use"
 msgstr "उपयोगार्थ बूटलोडर"
 
-#: any.pm:435 any.pm:467
+#: any.pm:428 any.pm:460
 #, c-format
 msgid "Boot device"
 msgstr "बूट उपकरण"
 
-#: any.pm:438
+#: any.pm:431
 #, c-format
 msgid "Main options"
 msgstr ""
 
-#: any.pm:439
+#: any.pm:432
 #, c-format
 msgid "Delay before booting default image"
 msgstr "डिफ़ाल्ट प्रतिबिंब को बूट करने के पूर्व देरी"
 
-#: any.pm:440
+#: any.pm:433
 #, c-format
 msgid "Enable ACPI"
 msgstr "ऐसीपीआई शक्तियुक्त बनायें"
 
-#: any.pm:441
+#: any.pm:434
 #, fuzzy, c-format
 msgid "Enable SMP"
 msgstr "ऐसीपीआई शक्तियुक्त बनायें"
 
-#: any.pm:442
+#: any.pm:435
 #, fuzzy, c-format
 msgid "Enable APIC"
 msgstr "ऐसीपीआई शक्तियुक्त बनायें"
 
-#: any.pm:444
+#: any.pm:437
 #, fuzzy, c-format
 msgid "Enable Local APIC"
 msgstr "ऐसीपीआई शक्तियुक्त बनायें"
 
-#: any.pm:445 security/level.pm:63
+#: any.pm:438 security/level.pm:63
 #, c-format
 msgid "Security"
 msgstr "सुरक्षा"
 
-#: any.pm:446 any.pm:906 any.pm:925 authentication.pm:249
+#: any.pm:439 any.pm:899 any.pm:918 authentication.pm:249
 #: diskdrake/smbnfs_gtk.pm:181
 #, c-format
 msgid "Password"
 msgstr "कूट-शब्द"
 
-#: any.pm:449 authentication.pm:260
+#: any.pm:442 authentication.pm:260
 #, c-format
 msgid "The passwords do not match"
 msgstr "कूटशब्द आपस में नहीं मिलते है"
 
-#: any.pm:449 authentication.pm:260 diskdrake/interactive.pm:1499
+#: any.pm:442 authentication.pm:260 diskdrake/interactive.pm:1499
 #, c-format
 msgid "Please try again"
 msgstr "कृपया पुनः प्रयास करें"
 
-#: any.pm:451
+#: any.pm:444
 #, fuzzy, c-format
 msgid "You cannot use a password with %s"
 msgstr "आरोह बिन्दु %s के लिए आप एक गूढ़-लिखित संचिका तंत्र का उपयोग नहीं कर सकते है"
 
-#: any.pm:455 any.pm:909 any.pm:927 authentication.pm:250
+#: any.pm:448 any.pm:902 any.pm:920 authentication.pm:250
 #, c-format
 msgid "Password (again)"
 msgstr "कूट-शब्द (पुनः बतायें)"
 
-#: any.pm:456
+#: any.pm:449
 #, c-format
 msgid "Clean /tmp at each boot"
 msgstr "/tmp निर्देशिका को प्रत्येक बूट के समय साफ़ करें"
 
-#: any.pm:466
+#: any.pm:459
 #, c-format
 msgid "Init Message"
 msgstr "आरम्भिक संदेश"
 
-#: any.pm:468
+#: any.pm:461
 #, c-format
 msgid "Open Firmware Delay"
 msgstr "मुक्त फ़र्मवेयर देरी"
 
-#: any.pm:469
+#: any.pm:462
 #, c-format
 msgid "Kernel Boot Timeout"
 msgstr "कर्नल बूट की समय-सीमा समाप्त"
 
-#: any.pm:470
+#: any.pm:463
 #, c-format
 msgid "Enable CD Boot?"
 msgstr "सीडीबूट को सक्रिय किया जायें?"
 
-#: any.pm:471
+#: any.pm:464
 #, c-format
 msgid "Enable OF Boot?"
 msgstr "बूट के लिए समर्थ?"
 
-#: any.pm:472
+#: any.pm:465
 #, c-format
 msgid "Default OS?"
 msgstr "डिफ़ाल्ट संचालन-तंत्र?"
 
-#: any.pm:546
+#: any.pm:539
 #, c-format
 msgid "Image"
 msgstr "प्रतिबिंब"
 
-#: any.pm:547 any.pm:561
+#: any.pm:540 any.pm:554
 #, c-format
 msgid "Root"
 msgstr "रूट"
 
-#: any.pm:548 any.pm:574
+#: any.pm:541 any.pm:567
 #, c-format
 msgid "Append"
 msgstr "जोड़ना"
 
-#: any.pm:550
+#: any.pm:543
 #, c-format
 msgid "Xen append"
 msgstr ""
 
-#: any.pm:552
+#: any.pm:545
 #, c-format
 msgid "Requires password to boot"
 msgstr ""
 
-#: any.pm:554
+#: any.pm:547
 #, c-format
 msgid "Video mode"
 msgstr "विडियो विधा"
 
-#: any.pm:556
+#: any.pm:549
 #, c-format
 msgid "Initrd"
 msgstr "इनिटआरडी"
 
-#: any.pm:557
+#: any.pm:550
 #, fuzzy, c-format
 msgid "Network profile"
 msgstr "नयी प्रोफ़ाइल..."
 
-#: any.pm:566 any.pm:571 any.pm:573 diskdrake/interactive.pm:411
+#: any.pm:559 any.pm:564 any.pm:566 diskdrake/interactive.pm:411
 #, c-format
 msgid "Label"
 msgstr "लेबिल"
 
-#: any.pm:568 any.pm:576 harddrake/v4l.pm:438
+#: any.pm:561 any.pm:569 harddrake/v4l.pm:438
 #, c-format
 msgid "Default"
 msgstr "डिफ़ाल्ट"
 
-#: any.pm:575
+#: any.pm:568
 #, c-format
 msgid "NoVideo"
 msgstr "कोई विडियो नहीं"
 
-#: any.pm:586
+#: any.pm:579
 #, c-format
 msgid "Empty label not allowed"
 msgstr "शून्य लेबिल की अनुमति नहीं है"
 
-#: any.pm:587
+#: any.pm:580
 #, c-format
 msgid "You must specify a kernel image"
 msgstr "आपको एक कर्नल प्रतिबिंब को बताना चाहिए"
 
-#: any.pm:587
+#: any.pm:580
 #, c-format
 msgid "You must specify a root partition"
 msgstr "आपको एक रूट विभाजन को बताया चाहिए"
 
-#: any.pm:588
+#: any.pm:581
 #, c-format
 msgid "This label is already used"
 msgstr "यह लेबिल पहिले से उपयोग में है"
 
-#: any.pm:606
+#: any.pm:599
 #, c-format
 msgid "Which type of entry do you want to add?"
 msgstr "किस प्रकार की प्रविष्टी को आप जोड़ना चाहता है?"
 
-#: any.pm:607
+#: any.pm:600
 #, c-format
 msgid "Linux"
 msgstr "लिनक्स"
 
-#: any.pm:607
+#: any.pm:600
 #, c-format
 msgid "Other OS (SunOS...)"
 msgstr "अन्य संचालन-तंत्र (सन संचालन-तंत्र...)"
 
-#: any.pm:608
+#: any.pm:601
 #, c-format
 msgid "Other OS (MacOS...)"
 msgstr "अन्य संचालन तंत्र (मैक संचालन तंत्र...)"
 
-#: any.pm:608
+#: any.pm:601
 #, c-format
 msgid "Other OS (Windows...)"
 msgstr "अन्य संचालन तंत्र (विण्डो...)"
 
-#: any.pm:655
+#: any.pm:648
 #, fuzzy, c-format
 msgid "Bootloader Configuration"
 msgstr "बूट शैली संरचना"
 
-#: any.pm:656
+#: any.pm:649
 #, c-format
 msgid ""
 "Here are the entries on your boot menu so far.\n"
@@ -346,198 +346,198 @@ msgstr ""
 "आपके बूट मीनू में अभी तक यह प्रविष्टीयां है । \n"
 "आप अतिरिक्त प्रविष्टीयों का निर्माण या वर्तमान प्रविष्टीयों को परिवर्तित कर सकते है ।"
 
-#: any.pm:867
+#: any.pm:860
 #, c-format
 msgid "access to X programs"
 msgstr "एक्स कार्यक्रमों तक पहुँच"
 
-#: any.pm:868
+#: any.pm:861
 #, c-format
 msgid "access to rpm tools"
 msgstr "आरपीएम औज़ारों तक पहुँच"
 
-#: any.pm:869
+#: any.pm:862
 #, c-format
 msgid "allow \"su\""
 msgstr "\"su\" को अनुमति"
 
-#: any.pm:870
+#: any.pm:863
 #, c-format
 msgid "access to administrative files"
 msgstr "प्रबंधकीय संचिकाओं तक पहुँच"
 
-#: any.pm:871
+#: any.pm:864
 #, c-format
 msgid "access to network tools"
 msgstr "नेटवर्क औज़ारों तक पहुँच"
 
-#: any.pm:872
+#: any.pm:865
 #, c-format
 msgid "access to compilation tools"
 msgstr "संकलन औज़ारों तक पहुँच"
 
-#: any.pm:878
+#: any.pm:871
 #, c-format
 msgid "(already added %s)"
 msgstr "(%s को पहिले से ही जोड़ा जा चुका है)"
 
-#: any.pm:884
+#: any.pm:877
 #, c-format
 msgid "Please give a user name"
 msgstr "कृपया एक उपयोगकर्ता नाम बतायें"
 
-#: any.pm:885
+#: any.pm:878
 #, fuzzy, c-format
 msgid ""
 "The user name must start with a lower case letter followed by only lower "
 "cased letters, numbers, `-' and `_'"
 msgstr "उपयोगकर्ता के नाम में सिर्फ़ अंग्रेजी के छोटे शब्द, संख्यायें, `-' और `_' होना चाहिए"
 
-#: any.pm:886
+#: any.pm:879
 #, c-format
 msgid "The user name is too long"
 msgstr "उपयोगकर्ता नाम काफ़ी लंबा है"
 
-#: any.pm:887
+#: any.pm:880
 #, c-format
 msgid "This user name has already been added"
 msgstr "यह उपयोगकर्ता नाम पहिले से विद्यमान है"
 
-#: any.pm:893 any.pm:929
+#: any.pm:886 any.pm:922
 #, c-format
 msgid "User ID"
 msgstr "उपयोग-कर्ता पहचान संख्या"
 
-#: any.pm:893 any.pm:930
+#: any.pm:886 any.pm:923
 #, c-format
 msgid "Group ID"
 msgstr "समूह पहचान संख्या"
 
-#: any.pm:894
+#: any.pm:887
 #, fuzzy, c-format
 msgid "%s must be a number"
 msgstr "%s विकल्प को एक संख्या होना चाहिए !"
 
-#: any.pm:895
+#: any.pm:888
 #, c-format
 msgid "%s should be above 500. Accept anyway?"
 msgstr ""
 
-#: any.pm:899
+#: any.pm:892
 #, fuzzy, c-format
 msgid "User management"
 msgstr "उपयोगकर्ता का नाम"
 
-#: any.pm:904
+#: any.pm:897
 #, c-format
 msgid "Enable guest account"
 msgstr ""
 
-#: any.pm:905 authentication.pm:236
+#: any.pm:898 authentication.pm:236
 #, fuzzy, c-format
 msgid "Set administrator (root) password"
 msgstr "महा-उपयोगकर्ता कूट-शब्द को निर्धारित करें"
 
-#: any.pm:911
+#: any.pm:904
 #, fuzzy, c-format
 msgid "Enter a user"
 msgstr ""
 "एक उपयोगकर्ता को बतायें\n"
 "%s"
 
-#: any.pm:913
+#: any.pm:906
 #, c-format
 msgid "Icon"
 msgstr "आईकॉन"
 
-#: any.pm:916
+#: any.pm:909
 #, c-format
 msgid "Real name"
 msgstr "वास्तविक नाम"
 
-#: any.pm:923
+#: any.pm:916
 #, c-format
 msgid "Login name"
 msgstr "संत्र-आरम्भ नाम"
 
-#: any.pm:928
+#: any.pm:921
 #, c-format
 msgid "Shell"
 msgstr "कोश"
 
-#: any.pm:971
+#: any.pm:964
 #, c-format
 msgid "Please wait, adding media..."
 msgstr "कृपया प्रतीक्षा करें, माध्यम को जोड़ा जा रहा है..."
 
-#: any.pm:1003 security/l10n.pm:14
+#: any.pm:996 security/l10n.pm:14
 #, c-format
 msgid "Autologin"
 msgstr "स्वतः संत्र-आरम्भ"
 
-#: any.pm:1004
+#: any.pm:997
 #, c-format
 msgid "I can set up your computer to automatically log on one user."
 msgstr ""
 "मै आपके कम्प्यूटर को एक उपयोगकर्ता के लिए स्वतः ही संत्र-आरम्भ करने के लिए स्थापित कर सकता "
 "हूँ ।"
 
-#: any.pm:1005
+#: any.pm:998
 #, fuzzy, c-format
 msgid "Use this feature"
 msgstr "क्या आप इस लक्षण का उपयोग करना चाहते है?"
 
-#: any.pm:1006
+#: any.pm:999
 #, c-format
 msgid "Choose the default user:"
 msgstr "डिफ़ाल्ट उपयोगकर्ता का चयन:"
 
-#: any.pm:1007
+#: any.pm:1000
 #, c-format
 msgid "Choose the window manager to run:"
 msgstr "चलाने के लिए विण्डो प्रबंधक का चयन करे:"
 
-#: any.pm:1018 any.pm:1032 any.pm:1100
+#: any.pm:1011 any.pm:1025 any.pm:1093
 #, fuzzy, c-format
 msgid "Release Notes"
 msgstr "संस्मरण: "
 
-#: any.pm:1039 any.pm:1389 interactive/gtk.pm:817
+#: any.pm:1032 any.pm:1382 interactive/gtk.pm:821
 #, c-format
 msgid "Close"
 msgstr "बन्द"
 
-#: any.pm:1086
+#: any.pm:1079
 #, c-format
 msgid "License agreement"
 msgstr "अनुज्ञापत्र एकरारनामा"
 
-#: any.pm:1088 diskdrake/dav.pm:26
+#: any.pm:1081 diskdrake/dav.pm:26 mygtk2.pm:1222
 #, c-format
 msgid "Quit"
 msgstr "निकास"
 
-#: any.pm:1095
+#: any.pm:1088
 #, fuzzy, c-format
 msgid "Do you accept this license ?"
 msgstr "कया आपके पास एक और है ?"
 
-#: any.pm:1096
+#: any.pm:1089
 #, c-format
 msgid "Accept"
 msgstr "स्वीकार"
 
-#: any.pm:1096
+#: any.pm:1089
 #, c-format
 msgid "Refuse"
 msgstr "अस्वीकृत"
 
-#: any.pm:1122 any.pm:1185
+#: any.pm:1115 any.pm:1178
 #, c-format
 msgid "Please choose a language to use"
 msgstr "कृपया उपयोग में लायी जाने वाली एक भाषा का चयन करें ।"
 
-#: any.pm:1150
+#: any.pm:1143
 #, fuzzy, c-format
 msgid ""
 "%s can support multiple languages. Select\n"
@@ -548,87 +548,87 @@ msgstr ""
 "का चयन करें जिसे आप संसाधन करना चाहते है । जब आपका संसाधन समाप्त हो\n"
 "जायेगा और जब आप अपने तंत्र को पुनः आरम्भ करेगें, तो ये उपलब्ध हो जायेगी ।"
 
-#: any.pm:1152 fs/partitioning_wizard.pm:174
+#: any.pm:1145 fs/partitioning_wizard.pm:174
 #, c-format
 msgid "Mageia"
 msgstr "मैनड्रैकलिनक्स"
 
-#: any.pm:1153
+#: any.pm:1146
 #, fuzzy, c-format
 msgid "Multiple languages"
 msgstr "सभी भाषायें"
 
-#: any.pm:1154
+#: any.pm:1147
 #, c-format
 msgid "Select Additional Languages"
 msgstr ""
 
-#: any.pm:1163 any.pm:1194
+#: any.pm:1156 any.pm:1187
 #, c-format
 msgid "Old compatibility (non UTF-8) encoding"
 msgstr ""
 
-#: any.pm:1164
+#: any.pm:1157
 #, c-format
 msgid "All languages"
 msgstr "सभी भाषायें"
 
-#: any.pm:1186
+#: any.pm:1179
 #, fuzzy, c-format
 msgid "Language choice"
 msgstr "मैनुअल पसन्द"
 
-#: any.pm:1240
+#: any.pm:1233
 #, c-format
 msgid "Country / Region"
 msgstr "देश / क्षेत्र"
 
-#: any.pm:1241
+#: any.pm:1234
 #, c-format
 msgid "Please choose your country"
 msgstr "कृपया अपने देश का चयन करें ।"
 
-#: any.pm:1243
+#: any.pm:1236
 #, c-format
 msgid "Here is the full list of available countries"
 msgstr "यह है उपलब्ध देशों की सम्पूर्ण सूची"
 
-#: any.pm:1244
+#: any.pm:1237
 #, fuzzy, c-format
 msgid "Other Countries"
 msgstr "दूसरे पोर्ट"
 
-#: any.pm:1244 interactive.pm:489 interactive/gtk.pm:445
+#: any.pm:1237 interactive.pm:489 interactive/gtk.pm:445
 #, c-format
 msgid "Advanced"
 msgstr "उन्नत"
 
-#: any.pm:1250
+#: any.pm:1243
 #, fuzzy, c-format
 msgid "Input method:"
 msgstr "नेट विधि:"
 
-#: any.pm:1253
+#: any.pm:1246
 #, c-format
 msgid "None"
 msgstr "कुछ नहीं"
 
-#: any.pm:1334
+#: any.pm:1327
 #, c-format
 msgid "No sharing"
 msgstr "कोई सहभाजिता नहीं"
 
-#: any.pm:1334
+#: any.pm:1327
 #, c-format
 msgid "Allow all users"
 msgstr "सभी उपयोगकर्ताओं को अनुमति"
 
-#: any.pm:1334
+#: any.pm:1327
 #, c-format
 msgid "Custom"
 msgstr "इच्छानुसार"
 
-#: any.pm:1338
+#: any.pm:1331
 #, c-format
 msgid ""
 "Would you like to allow users to share some of their directories?\n"
@@ -643,21 +643,21 @@ msgstr ""
 "\n"
 "\"कस्टम\" एक प्रत्येक-उपयोगकर्ता ग्रॉन्युलॉरटि की आज्ञा देता है।\n"
 
-#: any.pm:1350
+#: any.pm:1343
 #, c-format
 msgid ""
 "NFS: the traditional Unix file sharing system, with less support on Mac and "
 "Windows."
 msgstr ""
 
-#: any.pm:1353
+#: any.pm:1346
 #, c-format
 msgid ""
 "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
 "systems."
 msgstr ""
 
-#: any.pm:1361
+#: any.pm:1354
 #, c-format
 msgid ""
 "You can export using NFS or SMB. Please select which you would like to use."
@@ -665,12 +665,12 @@ msgstr ""
 "एन०एफ़०एस० या सॉबा का उपयोग करके आप एक्सपोर्ट कर सकते है । कृपया चयन करें आप किस का "
 "उपयोग करना चाहते है ।"
 
-#: any.pm:1389
+#: any.pm:1382
 #, c-format
 msgid "Launch userdrake"
 msgstr "यूज़रड्रैक को आरम्भ करें"
 
-#: any.pm:1391
+#: any.pm:1384
 #, c-format
 msgid ""
 "The per-user sharing uses the group \"fileshare\". \n"
@@ -679,7 +679,7 @@ msgstr ""
 "प्रत्येक-उपयोगकर्ता सहभाजिता \"संचिकासाझा\" समूह का उपयोग करती है।\n"
 "आप यूजरड्रैक का उपयोग करके एक उपयोगकर्ता को इस समूह में जोड़ सकते है।"
 
-#: any.pm:1498
+#: any.pm:1491
 #, fuzzy, c-format
 msgid ""
 "You need to logout and back in again for changes to take effect. Press OK to "
@@ -687,48 +687,48 @@ msgid ""
 msgstr ""
 "परिवर्तनों को प्रभाव में लाने के लिए, आपको संत्र-समाप्त करके पुन: संत्र-आरम्भ करना होगा"
 
-#: any.pm:1502
+#: any.pm:1495
 #, c-format
 msgid "You need to log out and back in again for changes to take effect"
 msgstr ""
 "परिवर्तनों को प्रभाव में लाने के लिए, आपको संत्र-समाप्त करके पुन: संत्र-आरम्भ करना होगा"
 
-#: any.pm:1537
+#: any.pm:1530
 #, c-format
 msgid "Timezone"
 msgstr "समय क्षेत्र"
 
-#: any.pm:1537
+#: any.pm:1530
 #, c-format
 msgid "Which is your timezone?"
 msgstr "आपका समय-क्षेत्र क्या है?"
 
-#: any.pm:1560 any.pm:1562
+#: any.pm:1553 any.pm:1555
 #, c-format
 msgid "Date, Clock & Time Zone Settings"
 msgstr ""
 
-#: any.pm:1563
+#: any.pm:1556
 #, c-format
 msgid "What is the best time?"
 msgstr ""
 
-#: any.pm:1567
+#: any.pm:1560
 #, fuzzy, c-format
 msgid "%s (hardware clock set to UTC)"
 msgstr "हार्डवेयर घड़ी को जी०एम०टी० पर स्थापित कर दिया गया है"
 
-#: any.pm:1568
+#: any.pm:1561
 #, fuzzy, c-format
 msgid "%s (hardware clock set to local time)"
 msgstr "हार्डवेयर घड़ी को जी०एम०टी० पर स्थापित कर दिया गया है"
 
-#: any.pm:1570
+#: any.pm:1563
 #, c-format
 msgid "NTP Server"
 msgstr "एन०टी०पी० सर्वर"
 
-#: any.pm:1571
+#: any.pm:1564
 #, c-format
 msgid "Automatic time synchronization (using NTP)"
 msgstr " स्वचालित समय एकसारीकरण (एनटीपी का उपयोग करते हुए)"
@@ -1051,7 +1051,7 @@ msgid "Domain Admin Password"
 msgstr "डोमेन प्रबंधन कूट-शब्द"
 
 #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:998
+#: bootloader.pm:1014
 #, c-format
 msgid ""
 "Welcome to the operating system chooser!\n"
@@ -1066,47 +1066,47 @@ msgstr ""
 "wait for default boot.\n"
 "\n"
 
-#: bootloader.pm:1190
+#: bootloader.pm:1206
 #, c-format
 msgid "LILO with text menu"
 msgstr "पाठ्य मीनू के साथ लिलो"
 
-#: bootloader.pm:1191
+#: bootloader.pm:1207
 #, c-format
 msgid "GRUB2 with graphical menu"
 msgstr ""
 
-#: bootloader.pm:1192
+#: bootloader.pm:1208
 #, c-format
 msgid "GRUB with graphical menu"
 msgstr ""
 
-#: bootloader.pm:1193
+#: bootloader.pm:1209
 #, c-format
 msgid "GRUB with text menu"
 msgstr ""
 
-#: bootloader.pm:1194
+#: bootloader.pm:1210
 #, c-format
 msgid "Yaboot"
 msgstr "याबूट"
 
-#: bootloader.pm:1195
+#: bootloader.pm:1211
 #, c-format
 msgid "SILO"
 msgstr "एस०आई०एल०ओ०"
 
-#: bootloader.pm:1281
+#: bootloader.pm:1297
 #, c-format
 msgid "not enough room in /boot"
 msgstr "/boot में इतना स्थान नहीं है"
 
-#: bootloader.pm:2030
+#: bootloader.pm:2079
 #, c-format
 msgid "You cannot install the bootloader on a %s partition\n"
 msgstr "एक %s विभाजन पर आप बूट-लोडर को संसाधित नहीं कर सकते है\n"
 
-#: bootloader.pm:2197
+#: bootloader.pm:2248
 #, c-format
 msgid ""
 "Your bootloader configuration must be updated because partition has been "
@@ -1115,7 +1115,7 @@ msgstr ""
 "आपकी बूटलोडर संरचना को अपडेट करना आवश्यक है क्योंकि विभाजन कोनयी क्रम-संख्या दी जा चुकी "
 "है"
 
-#: bootloader.pm:2210
+#: bootloader.pm:2261
 #, c-format
 msgid ""
 "The bootloader cannot be installed correctly. You have to boot rescue and "
@@ -1124,7 +1124,7 @@ msgstr ""
 "बूटलोडर को भली-भांति संसाधित नहीं किया जा सका । आपको बूट को बचाव विधा में करना होगा "
 "और\"%s\" का चयन करना होगा"
 
-#: bootloader.pm:2211
+#: bootloader.pm:2262
 #, c-format
 msgid "Re-install Boot Loader"
 msgstr "बूटलोडर को पुनः संसाधित करना"
@@ -1225,7 +1225,7 @@ msgstr "आरोह बिन्दु"
 msgid "Options"
 msgstr "विकल्पों"
 
-#: diskdrake/dav.pm:68 interactive.pm:388 interactive/gtk.pm:453
+#: diskdrake/dav.pm:68 interactive.pm:388 interactive/gtk.pm:457
 #, c-format
 msgid "Remove"
 msgstr "हटाना"
@@ -1331,7 +1331,7 @@ msgid "Continue"
 msgstr "जारी"
 
 #: diskdrake/hd_gtk.pm:188 fs/partitioning_wizard.pm:555 interactive.pm:654
-#: interactive/gtk.pm:809 interactive/gtk.pm:827 interactive/gtk.pm:848
+#: interactive/gtk.pm:813 interactive/gtk.pm:831 interactive/gtk.pm:862
 #: ugtk2.pm:936
 #, c-format
 msgid "Help"
@@ -1453,7 +1453,7 @@ msgid "More"
 msgstr "और अधिक"
 
 #: diskdrake/interactive.pm:281 diskdrake/interactive.pm:294
-#: diskdrake/interactive.pm:1293
+#: diskdrake/interactive.pm:1293 mygtk2.pm:1221
 #, fuzzy, c-format
 msgid "Confirmation"
 msgstr "संरचना"
@@ -2245,8 +2245,8 @@ msgstr "परिवर्तन का प्रकार"
 
 #: diskdrake/smbnfs_gtk.pm:81 interactive.pm:130 interactive.pm:551
 #: interactive/curses.pm:267 interactive/http.pm:104 interactive/http.pm:160
-#: interactive/stdio.pm:39 interactive/stdio.pm:148 mygtk2.pm:846 ugtk2.pm:415
-#: ugtk2.pm:517 ugtk2.pm:526 ugtk2.pm:812
+#: interactive/stdio.pm:39 interactive/stdio.pm:148 mygtk2.pm:846
+#: mygtk2.pm:1222 ugtk2.pm:415 ugtk2.pm:517 ugtk2.pm:526 ugtk2.pm:812
 #, c-format
 msgid "Cancel"
 msgstr "निरस्त"
@@ -2749,13 +2749,13 @@ msgstr ""
 msgid "Partitioning failed: %s"
 msgstr "विभाजनीकरण असफ़ल: %s "
 
-#: fs/type.pm:389
+#: fs/type.pm:390
 #, c-format
 msgid "You cannot use JFS for partitions smaller than 16MB"
 msgstr ""
 "१६ एम०बी० से कम के लिए विभाजनों के लिए जे०एफ़०एस० का उपयोग नहीं किया जा सकता है"
 
-#: fs/type.pm:390
+#: fs/type.pm:391
 #, c-format
 msgid "You cannot use ReiserFS for partitions smaller than 32MB"
 msgstr ""
@@ -3255,7 +3255,7 @@ msgstr ""
 "- या फ़िर नवीन ALSA ऐपीआई जो कि अनेकों परिष्कॄत लक्षणों को प्रदान करती है परन्तु ALSA "
 "लेखागार के उपयोग को चाहती है।\n"
 
-#: harddrake/sound.pm:385 harddrake/sound.pm:468
+#: harddrake/sound.pm:385 harddrake/sound.pm:487
 #, c-format
 msgid "Driver:"
 msgstr "चालक:"
@@ -3308,60 +3308,74 @@ msgstr "सांउड समस्या के निवारण हेत
 #: harddrake/sound.pm:430
 #, c-format
 msgid ""
-"The classic bug sound tester is to run the following commands:\n"
+"Below are some basic tips to help debug audio problems, but for accurate and "
+"up-to-date tips and tricks, please see:\n"
 "\n"
+"https://wiki.mageia.org/en/Support:DebuggingSoundProblems\n"
 "\n"
-"- \"lspcidrake -v | fgrep -i AUDIO\" will tell you which driver your card "
-"uses\n"
-"by default\n"
 "\n"
-"- \"grep sound-slot /etc/modprobe.conf\" will tell you what driver it\n"
-"currently uses\n"
 "\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"- General Recommendation: Enable PulseAudio. If you have opted to not to use "
+"PulseAudio, we would strongly advise you enable it. For the vast majority of "
+"desktop use cases, PulseAudio is the recommended and best supported option.\n"
 "\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services are configured to be run on\n"
-"initlevel 3\n"
 "\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
 "\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
-"क्लासिक साउण्ड दोष परीक्षक निम्नलिखित निर्देशों को चलाता है:\n"
+"- \"kmix\" (KDE), \"gnome-control-center sound\" (GNOME) and \"pauvucontrol"
+"\" (generic) will launch graphical applications to allow you to view your "
+"sound devices and adjust volume levels\n"
+"\n"
+"\n"
+"- \"ps aux | grep pulseaudio\" will check that PulseAudio is running.\n"
+"\n"
+"\n"
+"- \"pactl stat\" will check that you can connect to the PulseAudio daemon "
+"correctly.\n"
+"\n"
 "\n"
+"- \"pactl list sink-inputs\" will tell you which programs are currently "
+"playing sound via PulseAudio.\n"
 "\n"
-"- \"lspcidrake -v | fgrep -i AUDIO\" आपको बतायेगा कि डिफ़ाल्ट की भांति आपका\n"
-"कार्ड कौन-से चालक का उपयोग करता है।\n"
 "\n"
-"- \"grep sound-slot /etc/modprobe.conf\" आपको बतायेगा कि यह वर्तमान में\n"
-" किस चालक का उपयोग कर रहा है\n"
+"- \"systemctl status osspd.service\" will tell you the current state of the "
+"OSS Proxy Daemon. This is used to enable sound from legacy applications "
+"which use the OSS sound API. You should install the \"ossp\" package if you "
+"need this functionality.\n"
 "\n"
-"- \"/sbin/lsmod\" आपको यह जाँच करने में समर्थ बनायेगा कि इसके मॉडयूल (चालक)\n"
-"आरोहित है कि नहीं\n"
 "\n"
-"- \"/sbin/chkconfig --list sound\" और \"/sbin/chkconfig --list alsa\" \n"
-"आपको बतायेगें कि इनिट-स्तर-३ पर चलने के लिए यदि साउण्ड व alsa सेवायें \n"
-"संरचित है\n"
+"- \"pacmd ls\" will give you a LOT of debug information about the current "
+"state of your audio.\n"
 "\n"
-"- \"aumix -q\" आपको बतायेगा कि साउण्ड का वाल्यूम को मौन कर दिया गया है कि नहीं\n"
 "\n"
-"- \"/sbin/fuser -v /dev/dsp\" बतायेगा कि कौन कार्यक्रम साउण्ड कार्ड का उपयोग कर "
-"रहा है।\n"
+"- \"lspcidrake -v | grep -i audio\" will tell you which low-level driver "
+"your card uses by default.\n"
+"\n"
+"\n"
+"- \"/usr/sbin/lsmod | grep snd\" will enable you to check which sound "
+"related kernel modules (drivers) are loaded.\n"
+"\n"
+"\n"
+"- \"alsamixer -c 0\" will give you a text-based mixer to the low level ALSA "
+"mixer controls for first sound card\n"
+"\n"
+"\n"
+"- \"/usr/sbin/fuser -v /dev/snd/pcm* /dev/dsp\" will tell which programs are "
+"currently using the sound card directly (normally this should only show "
+"PulseAudio)\n"
+msgstr ""
 
-#: harddrake/sound.pm:457
+#: harddrake/sound.pm:476
 #, c-format
 msgid "Let me pick any driver"
 msgstr "मुझे किसी चालक को लेने दें"
 
-#: harddrake/sound.pm:460
+#: harddrake/sound.pm:479
 #, c-format
 msgid "Choosing an arbitrary driver"
 msgstr "एक स्वच्छन्द चालक का चयन करना"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:463
+#: harddrake/sound.pm:482
 #, c-format
 msgid ""
 "If you really think that you know which driver is the right one for your "
@@ -3441,12 +3455,12 @@ msgstr "नहीं"
 msgid "Choose a file"
 msgstr "एक संचिका का चयन करें"
 
-#: interactive.pm:388 interactive/gtk.pm:453
+#: interactive.pm:388 interactive/gtk.pm:457
 #, c-format
 msgid "Add"
 msgstr "जोड़ें"
 
-#: interactive.pm:388 interactive/gtk.pm:453
+#: interactive.pm:388 interactive/gtk.pm:457
 #, c-format
 msgid "Modify"
 msgstr "परिवर्तन"
@@ -3481,7 +3495,7 @@ msgstr "डिरेक्ट्री नहीं है"
 msgid "No such file"
 msgstr "ऐसी कोई फ़ाइल नहीं '%s'\n"
 
-#: interactive/gtk.pm:592
+#: interactive/gtk.pm:596
 #, c-format
 msgid "Beware, Caps Lock is enabled"
 msgstr ""
@@ -4768,17 +4782,17 @@ msgstr "%s में स्वागत"
 msgid "Moving used physical extents to other physical volumes failed"
 msgstr ""
 
-#: lvm.pm:149
+#: lvm.pm:152
 #, c-format
 msgid "Physical volume %s is still in use"
 msgstr ""
 
-#: lvm.pm:159
+#: lvm.pm:162
 #, c-format
 msgid "Remove the logical volumes first\n"
 msgstr "काल्पनिक भागों को पहिले हटायें\n"
 
-#: lvm.pm:202
+#: lvm.pm:205
 #, c-format
 msgid "The bootloader can't handle /boot on multiple physical volumes"
 msgstr ""
@@ -5233,12 +5247,12 @@ msgstr "क्या आप इस बटन पर क्लिक करना
 msgid "Password is trivial to guess"
 msgstr ""
 
-#: mygtk2.pm:1542
+#: mygtk2.pm:1565
 #, c-format
 msgid "Password should be resistant to basic attacks"
 msgstr ""
 
-#: mygtk2.pm:1543 mygtk2.pm:1544
+#: mygtk2.pm:1566 mygtk2.pm:1567
 #, fuzzy, c-format
 msgid "Password seems secure"
 msgstr "कूट-शब्द आवश्यक"
@@ -5464,8 +5478,8 @@ msgid ""
 "\n"
 "- none if set to \"None\".\n"
 "\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
-"(5))."
+"To authorize the services you need, use /etc/hosts.allow (see hosts."
+"allow(5))."
 msgstr ""
 
 #: security/help.pm:63
@@ -6523,7 +6537,7 @@ msgstr "सुदूर प्रबंधन"
 msgid "Database Server"
 msgstr "डाटाबेस सर्वर"
 
-#: services.pm:188 services.pm:227
+#: services.pm:188 services.pm:225
 #, c-format
 msgid "Services"
 msgstr "सेवायें"
@@ -6538,22 +6552,22 @@ msgstr "बूट-समय के स्वतः आरम्भ होने
 msgid "%d activated for %d registered"
 msgstr "%d सक्रिय की गई %d पंजीकॄत की हुई के लिए"
 
-#: services.pm:243
+#: services.pm:241
 #, c-format
 msgid "running"
 msgstr "चल रहा है"
 
-#: services.pm:243
+#: services.pm:241
 #, c-format
 msgid "stopped"
 msgstr "रोका गया"
 
-#: services.pm:248
+#: services.pm:246
 #, c-format
 msgid "Services and daemons"
 msgstr "सेवायें और डैमन"
 
-#: services.pm:254
+#: services.pm:252
 #, c-format
 msgid ""
 "No additional information\n"
@@ -6562,27 +6576,27 @@ msgstr ""
 "क्षमा करें, इस सेवा के बारे में\n"
 "कोई अतिरिक्त सूचना उपलब्ध नहीं"
 
-#: services.pm:259 ugtk2.pm:924
+#: services.pm:257 ugtk2.pm:924
 #, c-format
 msgid "Info"
 msgstr "सूचना"
 
-#: services.pm:262
+#: services.pm:260
 #, c-format
 msgid "Start when requested"
 msgstr "जब निवेदन किया जायें तब आरम्भ"
 
-#: services.pm:262
+#: services.pm:260
 #, c-format
 msgid "On boot"
 msgstr "बूट पर"
 
-#: services.pm:280
+#: services.pm:278
 #, c-format
 msgid "Start"
 msgstr "आरम्भ"
 
-#: services.pm:280
+#: services.pm:278
 #, c-format
 msgid "Stop"
 msgstr "रूको"
@@ -6833,6 +6847,51 @@ msgstr ""
 msgid "Installation failed"
 msgstr "संसाधन असफ़ल"
 
+#~ msgid ""
+#~ "The classic bug sound tester is to run the following commands:\n"
+#~ "\n"
+#~ "\n"
+#~ "- \"lspcidrake -v | fgrep -i AUDIO\" will tell you which driver your card "
+#~ "uses\n"
+#~ "by default\n"
+#~ "\n"
+#~ "- \"grep sound-slot /etc/modprobe.conf\" will tell you what driver it\n"
+#~ "currently uses\n"
+#~ "\n"
+#~ "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+#~ "loaded or not\n"
+#~ "\n"
+#~ "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" "
+#~ "will\n"
+#~ "tell you if sound and alsa services are configured to be run on\n"
+#~ "initlevel 3\n"
+#~ "\n"
+#~ "- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+#~ "\n"
+#~ "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound "
+#~ "card.\n"
+#~ msgstr ""
+#~ "क्लासिक साउण्ड दोष परीक्षक निम्नलिखित निर्देशों को चलाता है:\n"
+#~ "\n"
+#~ "\n"
+#~ "- \"lspcidrake -v | fgrep -i AUDIO\" आपको बतायेगा कि डिफ़ाल्ट की भांति आपका\n"
+#~ "कार्ड कौन-से चालक का उपयोग करता है।\n"
+#~ "\n"
+#~ "- \"grep sound-slot /etc/modprobe.conf\" आपको बतायेगा कि यह वर्तमान में\n"
+#~ " किस चालक का उपयोग कर रहा है\n"
+#~ "\n"
+#~ "- \"/sbin/lsmod\" आपको यह जाँच करने में समर्थ बनायेगा कि इसके मॉडयूल (चालक)\n"
+#~ "आरोहित है कि नहीं\n"
+#~ "\n"
+#~ "- \"/sbin/chkconfig --list sound\" और \"/sbin/chkconfig --list alsa\" \n"
+#~ "आपको बतायेगें कि इनिट-स्तर-३ पर चलने के लिए यदि साउण्ड व alsa सेवायें \n"
+#~ "संरचित है\n"
+#~ "\n"
+#~ "- \"aumix -q\" आपको बतायेगा कि साउण्ड का वाल्यूम को मौन कर दिया गया है कि नहीं\n"
+#~ "\n"
+#~ "- \"/sbin/fuser -v /dev/dsp\" बतायेगा कि कौन कार्यक्रम साउण्ड कार्ड का उपयोग "
+#~ "कर रहा है।\n"
+
 #~ msgid "File sharing"
 #~ msgstr "संचिका सहभाजन"
 
@@ -6999,8 +7058,8 @@ msgstr "संसाधन असफ़ल"
 #~ "If networking is not yet enabled, Drakx will attempt to join the domain "
 #~ "after the network setup step.\n"
 #~ "Should this setup fail for some reason and domain authentication is not "
-#~ "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows"
-#~ "(tm) Domain, and Admin Username/Password, after system boot.\n"
+#~ "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your "
+#~ "Windows(tm) Domain, and Admin Username/Password, after system boot.\n"
 #~ "The command 'wbinfo -t' will test whether your authentication secrets are "
 #~ "good."
 #~ msgstr ""
-- 
cgit v1.2.1