From 783a3fad921c10869474f5e746ffc2bb12c82531 Mon Sep 17 00:00:00 2001
From: Funda Wang <fwang@mandriva.org>
Date: Wed, 30 Nov 2005 10:35:35 +0000
Subject: Updated POT file.

---
 perl-install/share/po/de.po | 823 ++++++++++++++++++++++----------------------
 1 file changed, 418 insertions(+), 405 deletions(-)

(limited to 'perl-install/share/po/de.po')

diff --git a/perl-install/share/po/de.po b/perl-install/share/po/de.po
index 75a800b28..d164da21a 100644
--- a/perl-install/share/po/de.po
+++ b/perl-install/share/po/de.po
@@ -18,7 +18,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX-de\n"
-"POT-Creation-Date: 2005-11-18 16:24+0100\n"
+"POT-Creation-Date: 2005-11-30 17:38+0800\n"
 "PO-Revision-Date: 2005-09-20 17:12+0200\n"
 "Last-Translator: Frank Koester <frank@dueppel13.de>\n"
 "Language-Team: deutsch\n"
@@ -89,7 +89,7 @@ msgstr ""
 "Starten Sie den Rechner neu, entfernen Sie den USB-Stick, deaktivieren Sie\n"
 "den Schreibschutz und starten Sie Mandriva Move erneut."
 
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1332
+#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1334
 #, c-format
 msgid "Reboot"
 msgstr "Neustart"
@@ -188,17 +188,17 @@ msgstr "Bitte warten, erkenne und konfiguriere Geräte..."
 #: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404
 #: diskdrake/interactive.pm:422 diskdrake/interactive.pm:559
 #: diskdrake/interactive.pm:564 diskdrake/smbnfs_gtk.pm:41 do_pkgs.pm:19
-#: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:217 install_any.pm:1776
-#: install_any.pm:1828 install_steps.pm:81 install_steps_interactive.pm:37
+#: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:217 install_any.pm:1775
+#: install_any.pm:1827 install_steps.pm:81 install_steps_interactive.pm:37
 #: interactive/http.pm:117 interactive/http.pm:118 modules/interactive.pm:19
 #: network/ndiswrapper.pm:27 network/ndiswrapper.pm:42
 #: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
-#: network/netconnect.pm:833 network/netconnect.pm:862
-#: network/netconnect.pm:962 network/netconnect.pm:966
-#: network/netconnect.pm:970 network/netconnect.pm:975
-#: network/netconnect.pm:1120 network/netconnect.pm:1124
-#: network/netconnect.pm:1243 network/netconnect.pm:1248
-#: network/netconnect.pm:1268 network/netconnect.pm:1427
+#: network/netconnect.pm:838 network/netconnect.pm:867
+#: network/netconnect.pm:967 network/netconnect.pm:971
+#: network/netconnect.pm:975 network/netconnect.pm:980
+#: network/netconnect.pm:1125 network/netconnect.pm:1129
+#: network/netconnect.pm:1248 network/netconnect.pm:1253
+#: network/netconnect.pm:1273 network/netconnect.pm:1432
 #: network/thirdparty.pm:319 network/thirdparty.pm:326
 #: network/thirdparty.pm:370 network/thirdparty.pm:372
 #: network/thirdparty.pm:393 network/thirdparty.pm:417
@@ -240,7 +240,7 @@ msgstr "Bitte warten, erkenne und konfiguriere Geräte..."
 #: standalone/drakbackup:4435 standalone/drakclock:124
 #: standalone/drakconnect:676 standalone/drakconnect:680
 #: standalone/drakconnect:685 standalone/drakconnect:700
-#: standalone/drakfont:210 standalone/drakfont:223 standalone/drakfont:261
+#: standalone/drakfont:209 standalone/drakfont:222 standalone/drakfont:260
 #: standalone/drakgw:50 standalone/drakgw:188 standalone/drakhosts:98
 #: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260
 #: standalone/draknfs:306 standalone/draknfs:609 standalone/draknfs:616
@@ -256,7 +256,7 @@ msgstr "Bitte warten, erkenne und konfiguriere Geräte..."
 #: standalone/draksambashare:1192 standalone/draksambashare:1212
 #: standalone/draksambashare:1220 standalone/draksambashare:1232
 #: standalone/draksplash:162 standalone/drakxtv:107
-#: standalone/finish-install:49 standalone/logdrake:171
+#: standalone/finish-install:66 standalone/logdrake:171
 #: standalone/logdrake:440 standalone/logdrake:445 standalone/scannerdrake:59
 #: standalone/scannerdrake:202 standalone/scannerdrake:261
 #: standalone/scannerdrake:715 standalone/scannerdrake:726
@@ -496,13 +496,13 @@ msgstr ""
 "Xorg %s. BEMERKUNG: DIESE FUNKTION IST NOCH IM EXPERIMENTIER-\n"
 "STADIUM UND KANN ZUM STEHENBLEIBEN IHRES RECHNERS FÜHREN."
 
-#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:973
+#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:975
 #, c-format
 msgid "Custom"
 msgstr "Benutzerdefiniert"
 
 #: Xconfig/main.pm:127 diskdrake/dav.pm:26 help.pm:14
-#: install_steps_interactive.pm:86 install_steps_interactive.pm:1332
+#: install_steps_interactive.pm:86 install_steps_interactive.pm:1334
 #: printer/printerdrake.pm:882 printer/printerdrake.pm:899
 #: printer/printerdrake.pm:4523 printer/printerdrake.pm:4987
 #: standalone/drakhosts:263 standalone/drakroam:230 standalone/draksplash:93
@@ -534,8 +534,8 @@ msgstr "Test"
 
 #: Xconfig/main.pm:143 diskdrake/dav.pm:65 diskdrake/interactive.pm:448
 #: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
-#: printer/printerdrake.pm:1112 standalone/drakfont:494
-#: standalone/drakfont:556
+#: printer/printerdrake.pm:1112 standalone/drakfont:493
+#: standalone/drakfont:555
 #, c-format
 msgid "Options"
 msgstr "Optionen"
@@ -671,7 +671,7 @@ msgstr "Grafikkarte: %s"
 #: standalone/drakbackup:4155 standalone/drakbackup:4199
 #: standalone/drakbackup:4453 standalone/drakconnect:158
 #: standalone/drakconnect:852 standalone/drakconnect:939
-#: standalone/drakconnect:1030 standalone/drakfont:577 standalone/drakfont:587
+#: standalone/drakconnect:1030 standalone/drakfont:576 standalone/drakfont:586
 #: standalone/draksplash:173 standalone/drakups:212 standalone/net_monitor:339
 #: ugtk2.pm:392 ugtk2.pm:490 ugtk2.pm:899 ugtk2.pm:922
 #, c-format
@@ -679,8 +679,8 @@ msgid "Ok"
 msgstr "OK"
 
 #: Xconfig/resolution_and_depth.pm:373 diskdrake/smbnfs_gtk.pm:80 help.pm:89
-#: help.pm:444 install_steps_gtk.pm:455 install_steps_interactive.pm:429
-#: install_steps_interactive.pm:840 interactive.pm:120 interactive.pm:437
+#: help.pm:444 install_steps_gtk.pm:455 install_steps_interactive.pm:431
+#: install_steps_interactive.pm:842 interactive.pm:120 interactive.pm:437
 #: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
 #: interactive/stdio.pm:39 interactive/stdio.pm:142
 #: printer/printerdrake.pm:3859 standalone/drakautoinst:215
@@ -688,7 +688,7 @@ msgstr "OK"
 #: standalone/drakbackup:4028 standalone/drakbackup:4083
 #: standalone/drakbackup:4453 standalone/drakconnect:157
 #: standalone/drakconnect:937 standalone/drakconnect:1029
-#: standalone/drakfont:587 standalone/drakfont:665 standalone/drakfont:742
+#: standalone/drakfont:586 standalone/drakfont:662 standalone/drakfont:739
 #: standalone/draksplash:173 standalone/drakups:219 standalone/logdrake:176
 #: standalone/net_monitor:338 ugtk2.pm:386 ugtk2.pm:488 ugtk2.pm:497
 #: ugtk2.pm:899
@@ -701,7 +701,7 @@ msgstr "Abbrechen"
 #: interactive/gtk.pm:682 interactive/gtk.pm:684 standalone/drakTermServ:284
 #: standalone/drakbackup:4020 standalone/drakbug:105
 #: standalone/drakconnect:153 standalone/drakconnect:236
-#: standalone/drakfont:512 standalone/draknfs:206 standalone/drakperm:133
+#: standalone/drakfont:511 standalone/draknfs:206 standalone/drakperm:133
 #: standalone/draksambashare:320 standalone/draksec:344 standalone/draksec:346
 #: standalone/draksec:364 standalone/draksec:366 ugtk2.pm:1031 ugtk2.pm:1032
 #, c-format
@@ -1375,55 +1375,55 @@ msgstr "Standardmäßig Unicode verwenden"
 msgid "All languages"
 msgstr "Alle Sprachen"
 
-#: any.pm:840 help.pm:566 help.pm:855 install_steps_interactive.pm:961
+#: any.pm:842 help.pm:566 help.pm:855 install_steps_interactive.pm:963
 #, c-format
 msgid "Country / Region"
 msgstr "Staat / Region"
 
-#: any.pm:842
+#: any.pm:844
 #, c-format
 msgid "Please choose your country."
 msgstr "Bitte wählen Sie Ihren Staat."
 
-#: any.pm:844
+#: any.pm:846
 #, c-format
 msgid "Here is the full list of available countries"
 msgstr "Hier ist die komplette Liste aller Staaten"
 
-#: any.pm:845
+#: any.pm:847
 #, c-format
 msgid "Other Countries"
 msgstr "Andere Länder"
 
-#: any.pm:845 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
+#: any.pm:847 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
 #: interactive.pm:397
 #, c-format
 msgid "Advanced"
 msgstr "Fortgeschritten"
 
-#: any.pm:853
+#: any.pm:855
 #, c-format
 msgid "Input method:"
 msgstr "Einagbe-Methode:"
 
-#: any.pm:856 install_any.pm:422 network/netconnect.pm:318
-#: network/netconnect.pm:323 network/netconnect.pm:1234 network/wireless.pm:7
+#: any.pm:858 install_any.pm:422 network/netconnect.pm:318
+#: network/netconnect.pm:323 network/netconnect.pm:1239 network/wireless.pm:7
 #: printer/printerdrake.pm:105
 #, c-format
 msgid "None"
 msgstr "Keine"
 
-#: any.pm:973
+#: any.pm:975
 #, c-format
 msgid "No sharing"
 msgstr "Keine Freigaben"
 
-#: any.pm:973
+#: any.pm:975
 #, c-format
 msgid "Allow all users"
 msgstr "Allen Benutzern erlauben"
 
-#: any.pm:977
+#: any.pm:979
 #, c-format
 msgid ""
 "Would you like to allow users to share some of their directories?\n"
@@ -1438,7 +1438,7 @@ msgstr ""
 "\n"
 "Mit „Benutzerdefiniert“ können Sie eine Einstellung pro Benutzer vornehmen.\n"
 
-#: any.pm:989
+#: any.pm:991
 #, c-format
 msgid ""
 "NFS: the traditional Unix file sharing system, with less support on Mac and "
@@ -1447,7 +1447,7 @@ msgstr ""
 "NFS: das traditionelle Unix-Dateisystem für Freigaben im Netz, mit weniger "
 "Unterstützung für Mac und Windows."
 
-#: any.pm:992
+#: any.pm:994
 #, c-format
 msgid ""
 "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
@@ -1456,7 +1456,7 @@ msgstr ""
 "SMB: ein Dateisystem für Freigaben im Netz von Windows, Mac OS X und vielen "
 "modernen Linux-Systemen verwendet"
 
-#: any.pm:1000
+#: any.pm:1002
 #, c-format
 msgid ""
 "You can export using NFS or SMB. Please select which you would like to use."
@@ -1464,15 +1464,15 @@ msgstr ""
 "Sie können die Dateien mittels SMB oder NFS anbieten. Welche Variante wollen "
 "Sie?"
 
-#: any.pm:1025
+#: any.pm:1027
 #, c-format
 msgid "Launch userdrake"
 msgstr "UserDrake starten"
 
-#: any.pm:1025 printer/printerdrake.pm:4062 printer/printerdrake.pm:4065
+#: any.pm:1027 printer/printerdrake.pm:4062 printer/printerdrake.pm:4065
 #: printer/printerdrake.pm:4066 printer/printerdrake.pm:4067
 #: printer/printerdrake.pm:5305 standalone/drakTermServ:294
-#: standalone/drakbackup:4217 standalone/drakbug:126 standalone/drakfont:500
+#: standalone/drakbackup:4217 standalone/drakbug:126 standalone/drakfont:499
 #: standalone/drakids:64 standalone/drakids:77 standalone/drakids:85
 #: standalone/draknfs:210 standalone/net_monitor:117
 #: standalone/printerdrake:583
@@ -1480,7 +1480,7 @@ msgstr "UserDrake starten"
 msgid "Close"
 msgstr "Schließen"
 
-#: any.pm:1027
+#: any.pm:1029
 #, c-format
 msgid ""
 "The per-user sharing uses the group \"fileshare\". \n"
@@ -2160,6 +2160,13 @@ msgstr "Einhängepunkt: "
 msgid "Options: %s"
 msgstr "Optionen: %s"
 
+#: diskdrake/hd_gtk.pm:52 diskdrake/interactive.pm:292
+#: diskdrake/smbnfs_gtk.pm:21 install_interactive.pm:62
+#: install_steps_interactive.pm:342
+#, c-format
+msgid "Partitionning"
+msgstr ""
+
 #: diskdrake/hd_gtk.pm:92
 #, c-format
 msgid "Please make a backup of your data first"
@@ -2333,7 +2340,7 @@ msgstr "Beenden ohne die Partitionstabelle zu speichern?"
 msgid "Do you want to save /etc/fstab modifications"
 msgstr "Möchten Sie die vorgenommenen Änderungen in „/etc/fstab“ speichern?"
 
-#: diskdrake/interactive.pm:292 install_steps_interactive.pm:340
+#: diskdrake/interactive.pm:292 install_steps_interactive.pm:342
 #, c-format
 msgid "You need to reboot for the partition table modifications to take place"
 msgstr ""
@@ -3005,7 +3012,7 @@ msgstr ""
 msgid "The encryption keys do not match"
 msgstr "Die Passwörter stimmen nicht überein"
 
-#: diskdrake/interactive.pm:1338 network/netconnect.pm:1070
+#: diskdrake/interactive.pm:1338 network/netconnect.pm:1075
 #: standalone/drakconnect:419 standalone/drakroam:120
 #, c-format
 msgid "Encryption key"
@@ -3083,7 +3090,7 @@ msgstr "Konnte das Paket %s nicht installieren!"
 msgid "Mandatory package %s is missing"
 msgstr "Das zwingend benötigte Paket „%s“ fehlt."
 
-#: do_pkgs.pm:35 harddrake/sound.pm:274 install_steps_interactive.pm:1317
+#: do_pkgs.pm:35 harddrake/sound.pm:275 install_steps_interactive.pm:1319
 #: keyboard.pm:388 network/ndiswrapper.pm:95 network/netconnect.pm:472
 #: printer/printerdrake.pm:1416 printer/printerdrake.pm:2494
 #: printer/printerdrake.pm:2609 printer/printerdrake.pm:2930
@@ -3240,32 +3247,20 @@ msgstr "Alle I/O-Operationen am Dateisystem sollten parallel gemacht werden."
 
 #: fs/mount_options.pm:138
 #, c-format
-msgid ""
-"Allow an ordinary user to mount the file system. The\n"
-"name of the mounting user is written to mtab so that he can unmount the "
-"file\n"
-"system again. This option implies the options noexec, nosuid, and nodev\n"
-"(unless overridden by subsequent options, as in the option line\n"
-"user,exec,dev,suid )."
+msgid "Allow an ordinary user to mount the file system."
 msgstr ""
-"Einem normalen Benutzer das Einhängen des Dateisystem erlauben.\n"
-"Der Benutzername wird in mtab eingetragen, so dass er das Datei-\n"
-"system auch wieder aushängen kann.\n"
-"Diese Option beinhaltet die Optionen noexec, nosuid und nodec\n"
-"(solange nicht nachträglich durch eine der Optionen user, exec, dev \n"
-"oder suid überschrieben)."
 
-#: fs/mount_options.pm:144
+#: fs/mount_options.pm:140
 #, c-format
 msgid "Enable user disk quota accounting, and optionally enforce limits"
 msgstr "Nutzer-Platten-Quota aktivieren und wahlweise Grenzwerte durchsetzen"
 
-#: fs/mount_options.pm:146
+#: fs/mount_options.pm:142
 #, c-format
 msgid "Give write access to ordinary users"
 msgstr "Schreib Zugriff für den normalen Benutzer"
 
-#: fs/mount_options.pm:148
+#: fs/mount_options.pm:144
 #, c-format
 msgid "Give read-only access to ordinary users"
 msgstr "Schreib-Zugriff für den normalen Benutzer"
@@ -3397,7 +3392,7 @@ msgstr ""
 msgid "Nothing to do"
 msgstr "Nichts zu tun."
 
-#: harddrake/data.pm:62 install_any.pm:1711
+#: harddrake/data.pm:62 install_any.pm:1710
 #, c-format
 msgid "Floppy"
 msgstr "Diskettenlaufwerke"
@@ -3407,12 +3402,12 @@ msgstr "Diskettenlaufwerke"
 msgid "Zip"
 msgstr "ZIP"
 
-#: harddrake/data.pm:88 install_any.pm:1712
+#: harddrake/data.pm:88 install_any.pm:1711
 #, c-format
 msgid "Hard Disk"
 msgstr "Festplatten"
 
-#: harddrake/data.pm:97 install_any.pm:1713
+#: harddrake/data.pm:97 install_any.pm:1712
 #, c-format
 msgid "CDROM"
 msgstr "CD-ROM"
@@ -3523,7 +3518,7 @@ msgid "AGP controllers"
 msgstr "AGP-Controller"
 
 #: harddrake/data.pm:324 help.pm:186 help.pm:855
-#: install_steps_interactive.pm:993
+#: install_steps_interactive.pm:995
 #, c-format
 msgid "Printer"
 msgstr "Drucker"
@@ -3590,7 +3585,8 @@ msgid "Bridges and system controllers"
 msgstr "Brücken und System-Controller"
 
 #: harddrake/data.pm:449 help.pm:855 install_steps_interactive.pm:119
-#: install_steps_interactive.pm:953 standalone/keyboarddrake:29
+#: install_steps_interactive.pm:955 standalone/finish-install:37
+#: standalone/keyboarddrake:29
 #, c-format
 msgid "Keyboard"
 msgstr "Tastatur"
@@ -3600,7 +3596,7 @@ msgstr "Tastatur"
 msgid "Tablet and touchscreen"
 msgstr "Tablet und Touchscreen"
 
-#: harddrake/data.pm:471 help.pm:855 install_steps_interactive.pm:986
+#: harddrake/data.pm:471 help.pm:855 install_steps_interactive.pm:988
 #, c-format
 msgid "Mouse"
 msgstr "Maus"
@@ -3631,12 +3627,12 @@ msgstr "CPU #"
 msgid "Please Wait... Applying the configuration"
 msgstr "Einen Moment ... Ich richte die Konfiguration ein"
 
-#: harddrake/sound.pm:228
+#: harddrake/sound.pm:229
 #, c-format
 msgid "No alternative driver"
 msgstr "Kein alternativer Treiber"
 
-#: harddrake/sound.pm:229
+#: harddrake/sound.pm:230
 #, c-format
 msgid ""
 "There's no known OSS/ALSA alternative driver for your sound card (%s) which "
@@ -3645,12 +3641,12 @@ msgstr ""
 "Es existiert kein alternativer OSS/ALSA-Treiber für Ihre Soundkarte (%s), "
 "die momentan „%s“ verwendet."
 
-#: harddrake/sound.pm:235
+#: harddrake/sound.pm:236
 #, c-format
 msgid "Sound configuration"
 msgstr "Sound-Konfiguration"
 
-#: harddrake/sound.pm:237
+#: harddrake/sound.pm:238
 #, c-format
 msgid ""
 "Here you can select an alternative driver (either OSS or ALSA) for your "
@@ -3662,7 +3658,7 @@ msgstr ""
 #. -PO: here the first %s is either "OSS" or "ALSA", 
 #. -PO: the second %s is the name of the current driver
 #. -PO: and the third %s is the name of the default driver
-#: harddrake/sound.pm:242
+#: harddrake/sound.pm:243
 #, c-format
 msgid ""
 "\n"
@@ -3675,7 +3671,7 @@ msgstr ""
 "Ihre Karte verwendet momentan den %s „%s“ Treiber (Voreinstellung für Ihre "
 "Karte ist „%s“)"
 
-#: harddrake/sound.pm:244
+#: harddrake/sound.pm:245
 #, c-format
 msgid ""
 "OSS (Open Sound System) was the first sound API. It's an OS independent "
@@ -3708,17 +3704,17 @@ msgstr ""
 "- die neue ALSA-API mit den erweiterten Möglichkeiten. Diese verlangt "
 "allerdings das Nutzen der ALSA-Bilbliotheken.\n"
 
-#: harddrake/sound.pm:258 harddrake/sound.pm:346 standalone/drakups:146
+#: harddrake/sound.pm:259 harddrake/sound.pm:347 standalone/drakups:146
 #, c-format
 msgid "Driver:"
 msgstr "Treiber:"
 
-#: harddrake/sound.pm:266
+#: harddrake/sound.pm:267
 #, c-format
 msgid "Trouble shooting"
 msgstr "Fehlerbehandlung"
 
-#: harddrake/sound.pm:274
+#: harddrake/sound.pm:275
 #, c-format
 msgid ""
 "The old \"%s\" driver is blacklisted.\n"
@@ -3733,12 +3729,12 @@ msgstr ""
 "\n"
 "Der neue „%s“ Treiber steht nach einem Neustart zur Verfügung."
 
-#: harddrake/sound.pm:282
+#: harddrake/sound.pm:283
 #, c-format
 msgid "No open source driver"
 msgstr "Kein OpenSource-Treiber"
 
-#: harddrake/sound.pm:283
+#: harddrake/sound.pm:284
 #, c-format
 msgid ""
 "There's no free driver for your sound card (%s), but there's a proprietary "
@@ -3747,33 +3743,33 @@ msgstr ""
 "Es existiert kein freier Treiber für Ihre Soundkarte (%s), aber es gibt "
 "einen proprietären Treiber unter  „%s“."
 
-#: harddrake/sound.pm:286
+#: harddrake/sound.pm:287
 #, c-format
 msgid "No known driver"
 msgstr "Kein bekannter Treiber"
 
-#: harddrake/sound.pm:287
+#: harddrake/sound.pm:288
 #, c-format
 msgid "There's no known driver for your sound card (%s)"
 msgstr "Es gibt keinen bekannten Treiber für Ihre Soundkarte (%s)"
 
-#: harddrake/sound.pm:291 network/netconnect.pm:98 network/netconnect.pm:833
+#: harddrake/sound.pm:292 network/netconnect.pm:98 network/netconnect.pm:838
 #, c-format
 msgid "Unknown driver"
 msgstr "Unbekannter Treiber"
 
-#: harddrake/sound.pm:292
+#: harddrake/sound.pm:293
 #, c-format
 msgid "Error: The \"%s\" driver for your sound card is unlisted"
 msgstr "Fehler: Es gibt keinen bekannten Treiber für Ihre Soundkarte (%s)"
 
-#: harddrake/sound.pm:306
+#: harddrake/sound.pm:307
 #, c-format
 msgid "Sound trouble shooting"
 msgstr "Sound-Fehlerbehandlung"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:309
+#: harddrake/sound.pm:310
 #, c-format
 msgid ""
 "The classic bug sound tester is to run the following commands:\n"
@@ -3810,18 +3806,18 @@ msgstr ""
 "- „/sbin/fuser -v /dev/dsp“ verrät das Programm, das die Soundkarte "
 "benutzt.\n"
 
-#: harddrake/sound.pm:335
+#: harddrake/sound.pm:336
 #, c-format
 msgid "Let me pick any driver"
 msgstr "Lassen Sie mich irgendeinen Treiber auswählen"
 
-#: harddrake/sound.pm:338
+#: harddrake/sound.pm:339
 #, c-format
 msgid "Choosing an arbitrary driver"
 msgstr "Ich wähle einen willkürlichen Treiber"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:341
+#: harddrake/sound.pm:342
 #, c-format
 msgid ""
 "If you really think that you know which driver is the right one for your "
@@ -3919,7 +3915,7 @@ msgstr ""
 "Schaltfläche „%s“."
 
 #: help.pm:14 install_steps_gtk.pm:539 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:738 standalone/drakautoinst:214
+#: install_steps_interactive.pm:740 standalone/drakautoinst:214
 #, c-format
 msgid "Accept"
 msgstr "Akzeptieren"
@@ -4240,7 +4236,7 @@ msgstr "Entwicklung"
 msgid "Graphical Environment"
 msgstr "Grafische Arbeitsoberfläche"
 
-#: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:646
+#: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:648
 #, c-format
 msgid "Individual package selection"
 msgstr "Individuelle Paketauswahl"
@@ -4250,7 +4246,7 @@ msgstr "Individuelle Paketauswahl"
 msgid "Upgrade"
 msgstr "Aktualisierung"
 
-#: help.pm:146 install_steps_interactive.pm:604
+#: help.pm:146 install_steps_interactive.pm:606
 #, c-format
 msgid "With X"
 msgstr "Mit X"
@@ -4341,14 +4337,14 @@ msgstr ""
 "erstellen, lesen Sie bitte den zweiten Tipp des vorangegangenen\n"
 "Installationsschrittes."
 
-#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:945
+#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:944
 #: interactive.pm:161 modules/interactive.pm:71 standalone/drakbackup:2613
 #: standalone/draksec:54 standalone/harddrake2:332 ugtk2.pm:898 wizards.pm:156
 #, c-format
 msgid "No"
 msgstr "Nein"
 
-#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:945 interactive.pm:161
+#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:944 interactive.pm:161
 #: modules/interactive.pm:71 printer/printerdrake.pm:883
 #: printer/printerdrake.pm:898 standalone/drakbackup:2613
 #: standalone/draksec:55 standalone/harddrake2:331 ugtk2.pm:898 wizards.pm:156
@@ -4451,7 +4447,7 @@ msgstr ""
 "Internetverbindung. Mit dieser Option installieren Sie einen Time-Server,\n"
 "der von weiteren Maschinen Ihres lokalen Netzwerks genutzt werden kann."
 
-#: help.pm:217 install_steps_interactive.pm:888
+#: help.pm:217 install_steps_interactive.pm:890
 #, c-format
 msgid "Hardware clock set to GMT"
 msgstr "Hardware Uhr gestellt auf GMT"
@@ -4821,7 +4817,7 @@ msgstr "Komplette Platte löschen"
 msgid "Remove Windows"
 msgstr "Windows™ löschen"
 
-#: help.pm:374 install_interactive.pm:228
+#: help.pm:374 install_interactive.pm:232
 #, c-format
 msgid "Custom disk partitioning"
 msgstr "Benutzerdefinierte Partitionierung"
@@ -4906,17 +4902,17 @@ msgstr ""
 msgid "Generate auto-install floppy"
 msgstr "Erstellen einer Autoinstallations-Diskette"
 
-#: help.pm:409 install_steps_interactive.pm:1343
+#: help.pm:409 install_steps_interactive.pm:1345
 #, c-format
 msgid "Replay"
 msgstr "Erneut abspielen"
 
-#: help.pm:409 install_steps_interactive.pm:1343
+#: help.pm:409 install_steps_interactive.pm:1345
 #, c-format
 msgid "Automated"
 msgstr "Automatisiert"
 
-#: help.pm:409 install_steps_interactive.pm:1346
+#: help.pm:409 install_steps_interactive.pm:1348
 #, c-format
 msgid "Save packages selection"
 msgstr "Paketauswahl speichern"
@@ -5825,8 +5821,8 @@ msgstr ""
 "angezeigt. Sollte die von DrakX getroffene Auswahl nicht korrekt sein,\n"
 "betätigen Sie einfach die Schaltfläche, um sie zu korrigieren."
 
-#: help.pm:788 help.pm:855 install_steps_interactive.pm:1020
-#: install_steps_interactive.pm:1037
+#: help.pm:788 help.pm:855 install_steps_interactive.pm:1022
+#: install_steps_interactive.pm:1039
 #, c-format
 msgid "Sound card"
 msgstr "Soundkarte"
@@ -5974,13 +5970,13 @@ msgstr ""
 "als Server verwenden, sollten Sie unbedingt einen Blick auf diese Liste\n"
 "werfen."
 
-#: help.pm:855 install_steps_interactive.pm:884
-#: install_steps_interactive.pm:979 standalone/drakclock:100
+#: help.pm:855 install_steps_interactive.pm:886
+#: install_steps_interactive.pm:981 standalone/drakclock:100
 #, c-format
 msgid "Timezone"
 msgstr "Zeitzone"
 
-#: help.pm:855 install_steps_interactive.pm:1053
+#: help.pm:855 install_steps_interactive.pm:1055
 #, c-format
 msgid "TV card"
 msgstr "TV-Karte"
@@ -5995,33 +5991,33 @@ msgstr "ISDN-Karte"
 msgid "Graphical Interface"
 msgstr "Grafikumgebung"
 
-#: help.pm:855 install_any.pm:1734 install_steps_interactive.pm:1071
+#: help.pm:855 install_any.pm:1733 install_steps_interactive.pm:1073
 #: standalone/drakbackup:2040
 #, c-format
 msgid "Network"
 msgstr "Netzwerk"
 
-#: help.pm:855 install_steps_interactive.pm:1083
+#: help.pm:855 install_steps_interactive.pm:1085
 #, c-format
 msgid "Proxies"
 msgstr "Proxies"
 
-#: help.pm:855 install_steps_interactive.pm:1094
+#: help.pm:855 install_steps_interactive.pm:1096
 #, c-format
 msgid "Security Level"
 msgstr "Sicherheitsebene"
 
-#: help.pm:855 install_steps_interactive.pm:1108 network/drakfirewall.pm:189
+#: help.pm:855 install_steps_interactive.pm:1110 network/drakfirewall.pm:189
 #, c-format
 msgid "Firewall"
 msgstr "Firewall"
 
-#: help.pm:855 install_steps_interactive.pm:1124
+#: help.pm:855 install_steps_interactive.pm:1126
 #, c-format
 msgid "Bootloader"
 msgstr "Bootloader"
 
-#: help.pm:855 install_steps_interactive.pm:1137 services.pm:114
+#: help.pm:855 install_steps_interactive.pm:1139 services.pm:114
 #: services.pm:157 services.pm:193
 #, c-format
 msgid "Services"
@@ -6135,7 +6131,7 @@ msgstr "Netzwerk (NFS)"
 msgid "Insert the CD 1 again"
 msgstr "Legen Sie die CD 1 wieder ein"
 
-#: install_any.pm:478 network/netconnect.pm:862 standalone/drakbackup:114
+#: install_any.pm:478 network/netconnect.pm:867 standalone/drakbackup:114
 #, c-format
 msgid "No device found"
 msgstr "Keine Geräte gefunden"
@@ -6214,7 +6210,7 @@ msgid "Copying in progress"
 msgstr "Dateien werden kopiert"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:936
+#: install_any.pm:935
 #, c-format
 msgid ""
 "You have selected the following server(s): %s\n"
@@ -6239,7 +6235,7 @@ msgstr ""
 "Wollen Sie diese Server wirklich installieren?\n"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:959
+#: install_any.pm:958
 #, c-format
 msgid ""
 "The following packages will be removed to allow upgrading your system: %s\n"
@@ -6253,22 +6249,22 @@ msgstr ""
 "\n"
 "Wollen Sie diese Pakete wirklich entfernen?\n"
 
-#: install_any.pm:1395 partition_table.pm:597
+#: install_any.pm:1394 partition_table.pm:597
 #, c-format
 msgid "Error reading file %s"
 msgstr "Fehler beim Lesen der Datei %s"
 
-#: install_any.pm:1629
+#: install_any.pm:1628
 #, c-format
 msgid "The following disk(s) were renamed:"
 msgstr "Die folgenden Datenträger wurden umbenannt:"
 
-#: install_any.pm:1631
+#: install_any.pm:1630
 #, c-format
 msgid "%s (previously named as %s)"
 msgstr "%s (vorher als %s bezeichnet)"
 
-#: install_any.pm:1671
+#: install_any.pm:1670
 #, c-format
 msgid ""
 "An error occurred - no valid devices were found on which to create new "
@@ -6278,52 +6274,52 @@ msgstr ""
 "denen neue Dateisysteme erstellt werden können. Bitte überprüfen Sie Ihre "
 "Hardware(-Konfiguration) auf mögliche Fehler und falsche Einstellungen."
 
-#: install_any.pm:1715
+#: install_any.pm:1714
 #, c-format
 msgid "HTTP"
 msgstr "HTTP"
 
-#: install_any.pm:1715
+#: install_any.pm:1714
 #, c-format
 msgid "FTP"
 msgstr "FTP"
 
-#: install_any.pm:1715
+#: install_any.pm:1714
 #, c-format
 msgid "NFS"
 msgstr "NFS"
 
-#: install_any.pm:1738
+#: install_any.pm:1737
 #, c-format
 msgid "Please choose a media"
 msgstr "Bitte wählen Sie ein Medium"
 
-#: install_any.pm:1754
+#: install_any.pm:1753
 #, c-format
 msgid "File already exists. Overwrite it?"
 msgstr "Die Datei existiert bereits. Überschreiben?"
 
-#: install_any.pm:1758
+#: install_any.pm:1757
 #, c-format
 msgid "Permission denied"
 msgstr "Erlaubnis verweigert"
 
-#: install_any.pm:1807
+#: install_any.pm:1806
 #, c-format
 msgid "Bad NFS name"
 msgstr "Falscher NFS-Name"
 
-#: install_any.pm:1828
+#: install_any.pm:1827
 #, c-format
 msgid "Bad media %s"
 msgstr "Mediumfehler %s"
 
-#: install_any.pm:1878
+#: install_any.pm:1877
 #, c-format
 msgid "Can not make screenshots before partitioning"
 msgstr "Vor der Partitionierung kann ich keine Screenshots machen."
 
-#: install_any.pm:1885
+#: install_any.pm:1884
 #, c-format
 msgid "Screenshots will be available after install in %s"
 msgstr "Die Screenshots liegen nach der Installation unter „%s“"
@@ -6524,19 +6520,26 @@ msgstr ""
 "Sie haben mehr als eine Festplatte.\n"
 "Auf welche soll GNU/Linux installiert werden?"
 
-#: install_interactive.pm:219
+#: install_interactive.pm:216 install_interactive.pm:222
+#: install_interactive.pm:275 install_interactive.pm:280
+#: install_steps_interactive.pm:278 steps.pm:21
+#, c-format
+msgid "Partitioning"
+msgstr "Partitionierung"
+
+#: install_interactive.pm:221
 #, c-format
 msgid "ALL existing partitions and their data will be lost on drive %s"
 msgstr ""
 "SÄMTLICHE existierende Partitionen samt der darauf befindlichen Daten \n"
 "auf Laufwerk %s gehen dabei verloren"
 
-#: install_interactive.pm:232
+#: install_interactive.pm:236
 #, c-format
 msgid "Use fdisk"
 msgstr "Fdisk verwenden"
 
-#: install_interactive.pm:235
+#: install_interactive.pm:239
 #, c-format
 msgid ""
 "You can now partition %s.\n"
@@ -6546,27 +6549,27 @@ msgstr ""
 "Vergessen Sie nicht die Einstellungen mittels ‚w‘ zu speichern, \n"
 "sobald Sie fertig sind."
 
-#: install_interactive.pm:271
+#: install_interactive.pm:275
 #, c-format
 msgid "I can not find any room for installing"
 msgstr "Ich finde nicht genug Platz für die Installation"
 
-#: install_interactive.pm:275
+#: install_interactive.pm:279
 #, c-format
 msgid "The DrakX Partitioning wizard found the following solutions:"
 msgstr "Der DrakX-Partitionierungsassistent fand folgende Lösung:"
 
-#: install_interactive.pm:281
+#: install_interactive.pm:287
 #, c-format
 msgid "Partitioning failed: %s"
 msgstr "Das Partitionieren schlug fehl: %s"
 
-#: install_interactive.pm:288
+#: install_interactive.pm:294
 #, c-format
 msgid "Bringing up the network"
 msgstr "Netzwerkverbindung herstellen"
 
-#: install_interactive.pm:293
+#: install_interactive.pm:299
 #, c-format
 msgid "Bringing down the network"
 msgstr "Netzwerkverbindung trennen"
@@ -6957,12 +6960,12 @@ msgstr ""
 "Installationsstart und geben Sie „text“ an der Eingabeaufforderung \n"
 "ein."
 
-#: install_steps_gtk.pm:211 install_steps_interactive.pm:628
+#: install_steps_gtk.pm:211 install_steps_interactive.pm:630
 #, c-format
 msgid "Package Group Selection"
 msgstr "Auswahl der Paketgruppen"
 
-#: install_steps_gtk.pm:254 install_steps_interactive.pm:571
+#: install_steps_gtk.pm:254 install_steps_interactive.pm:573
 #, c-format
 msgid "Total size: %d / %d MB"
 msgstr "Gesamtgröße: %d / %d MB"
@@ -7084,12 +7087,12 @@ msgstr "Erneuere Paket Auswahl"
 msgid "Minimal install"
 msgstr "Minimal-Installation"
 
-#: install_steps_gtk.pm:414 install_steps_interactive.pm:490
+#: install_steps_gtk.pm:414 install_steps_interactive.pm:492
 #, c-format
 msgid "Choose the packages you want to install"
 msgstr "Zu installierende Pakete auswählen"
 
-#: install_steps_gtk.pm:431 install_steps_interactive.pm:714
+#: install_steps_gtk.pm:431 install_steps_interactive.pm:716
 #, c-format
 msgid "Installing"
 msgstr "Installation wird durchgeführt"
@@ -7115,12 +7118,12 @@ msgid "%d packages"
 msgstr "%d Pakete"
 
 #: install_steps_gtk.pm:539 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:738
+#: install_steps_interactive.pm:740
 #, c-format
 msgid "Refuse"
 msgstr "Ablehnen"
 
-#: install_steps_gtk.pm:543 install_steps_interactive.pm:742
+#: install_steps_gtk.pm:543 install_steps_interactive.pm:744
 #, c-format
 msgid ""
 "Change your Cd-Rom!\n"
@@ -7132,29 +7135,29 @@ msgstr ""
 "Bitte legen Sie die CD-ROM „%s“ in Ihr Laufwerk. Drücken Sie dann auf „OK“.\n"
 "Falls Sie sie nicht vorliegen haben, drücken Sie auf „Abbrechen“."
 
-#: install_steps_gtk.pm:556 install_steps_interactive.pm:753
+#: install_steps_gtk.pm:556 install_steps_interactive.pm:755
 #, c-format
 msgid "There was an error ordering packages:"
 msgstr "Bei der Anforderung folgender Pakete trat ein Fehler auf:"
 
-#: install_steps_gtk.pm:558 install_steps_interactive.pm:757
+#: install_steps_gtk.pm:558 install_steps_interactive.pm:759
 #, c-format
 msgid "There was an error installing packages:"
 msgstr "Bei der Installation der Pakete trat ein Fehler auf:"
 
-#: install_steps_gtk.pm:560 install_steps_interactive.pm:753
-#: install_steps_interactive.pm:757
+#: install_steps_gtk.pm:560 install_steps_interactive.pm:755
+#: install_steps_interactive.pm:759
 #, c-format
 msgid "Go on anyway?"
 msgstr "Wollen Sie trotzdem fortfahren?"
 
-#: install_steps_gtk.pm:582 install_steps_interactive.pm:939 steps.pm:30
+#: install_steps_gtk.pm:582 install_steps_interactive.pm:941 steps.pm:30
 #, c-format
 msgid "Summary"
 msgstr "Zusammenfassung"
 
-#: install_steps_gtk.pm:605 install_steps_interactive.pm:935
-#: install_steps_interactive.pm:1084
+#: install_steps_gtk.pm:605 install_steps_interactive.pm:937
+#: install_steps_interactive.pm:1086
 #, c-format
 msgid "not configured"
 msgstr "Nicht eingerichtet"
@@ -7296,7 +7299,7 @@ msgstr "Durchsuche die Partitionen, um die Einhängepunkte zu finden"
 msgid "Choose the mount points"
 msgstr "Wählen Sie die Einhängepunkte"
 
-#: install_steps_interactive.pm:323
+#: install_steps_interactive.pm:325
 #, c-format
 msgid ""
 "No free space for 1MB bootstrap! Install will continue, but to boot your "
@@ -7306,7 +7309,7 @@ msgstr ""
 "Installation wird fortgesetzt, Sie müssen jedoch eine Start-Partition mit "
 "DiskDrake erstellen."
 
-#: install_steps_interactive.pm:328
+#: install_steps_interactive.pm:330
 #, c-format
 msgid ""
 "You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
@@ -7316,17 +7319,17 @@ msgstr ""
 "Sie müssen einen PPC PReP Boot Lader erzeugen! Die Installation wird "
 "fortgesetzt, Sie müssen jedoch eine Start-Partition mit DiskDrake erstellen."
 
-#: install_steps_interactive.pm:364
+#: install_steps_interactive.pm:366
 #, c-format
 msgid "Choose the partitions you want to format"
 msgstr "Zu formatierende Partitionen auswählen"
 
-#: install_steps_interactive.pm:366
+#: install_steps_interactive.pm:368
 #, c-format
 msgid "Check bad blocks?"
 msgstr "Soll ich nach defekten Blöcken suchen?"
 
-#: install_steps_interactive.pm:394
+#: install_steps_interactive.pm:396
 #, c-format
 msgid ""
 "Failed to check filesystem %s. Do you want to repair the errors? (beware, "
@@ -7335,29 +7338,29 @@ msgstr ""
 "Es traten Fehler beim Prüfen des Dateisystems %s auf. Wollen Sie, dass ich "
 "versuche sie zu beheben? (Achtung: das kann zu Datenverlust führen)"
 
-#: install_steps_interactive.pm:397
+#: install_steps_interactive.pm:399
 #, c-format
 msgid "Not enough swap space to fulfill installation, please add some"
 msgstr ""
 "Der Swap-Bereich ist zu klein, um die Installation zu ermöglichen! \n"
 "Bitte vergrößern Sie den Bereich."
 
-#: install_steps_interactive.pm:406
+#: install_steps_interactive.pm:408
 #, c-format
 msgid "Looking for available packages and rebuilding rpm database..."
 msgstr "Suche nach vorhandenen Paketen und aktualisiere RPM-Datenbank ..."
 
-#: install_steps_interactive.pm:407 install_steps_interactive.pm:459
+#: install_steps_interactive.pm:409 install_steps_interactive.pm:461
 #, c-format
 msgid "Looking for available packages..."
 msgstr "Suche nach vorhandenen Paketen..."
 
-#: install_steps_interactive.pm:428 install_steps_interactive.pm:839
+#: install_steps_interactive.pm:430 install_steps_interactive.pm:841
 #, c-format
 msgid "Choose a mirror from which to get the packages"
 msgstr "Bitte wählen Sie einen Mirror, von dem Sie die Pakete holen wollen."
 
-#: install_steps_interactive.pm:468
+#: install_steps_interactive.pm:470
 #, c-format
 msgid ""
 "Your system does not have enough space left for installation or upgrade (%d "
@@ -7366,7 +7369,7 @@ msgstr ""
 "Es steht auf Ihrem System nicht genügend Speicherplatz für die \n"
 "Installation bzw. Aktualisierung zur Verfügung (%d > %d)."
 
-#: install_steps_interactive.pm:502
+#: install_steps_interactive.pm:504
 #, c-format
 msgid ""
 "Please choose load or save package selection.\n"
@@ -7376,33 +7379,33 @@ msgstr ""
 "gespeichert werden soll. Es handelt sich um das gleiche\n"
 "Format, wie die unter „auto_install“ erzeugten Disketten."
 
-#: install_steps_interactive.pm:504
+#: install_steps_interactive.pm:506
 #, c-format
 msgid "Load"
 msgstr "Last"
 
-#: install_steps_interactive.pm:504 standalone/drakbackup:4055
+#: install_steps_interactive.pm:506 standalone/drakbackup:4055
 #: standalone/drakbackup:4125 standalone/logdrake:175
 #, c-format
 msgid "Save"
 msgstr "Speichern"
 
-#: install_steps_interactive.pm:512
+#: install_steps_interactive.pm:514
 #, c-format
 msgid "Bad file"
 msgstr "Datei fehlerhaft"
 
-#: install_steps_interactive.pm:585
+#: install_steps_interactive.pm:587
 #, c-format
 msgid "Selected size is larger than available space"
 msgstr "Gewünschte Größe übersteigt den verfügbaren Platz"
 
-#: install_steps_interactive.pm:600
+#: install_steps_interactive.pm:602
 #, c-format
 msgid "Type of install"
 msgstr "Installationstyp"
 
-#: install_steps_interactive.pm:601
+#: install_steps_interactive.pm:603
 #, c-format
 msgid ""
 "You have not selected any group of packages.\n"
@@ -7411,22 +7414,22 @@ msgstr ""
 "Sie haben keine Paketgruppe ausgewählt.\n"
 "Bitte wählen Sie die minimale Installation, die Sie wünschen."
 
-#: install_steps_interactive.pm:605
+#: install_steps_interactive.pm:607
 #, c-format
 msgid "With basic documentation (recommended!)"
 msgstr "Mit minimaler Dokumentation (Empfohlen)"
 
-#: install_steps_interactive.pm:606
+#: install_steps_interactive.pm:608
 #, c-format
 msgid "Truly minimal install (especially no urpmi)"
 msgstr "Extrem minimale Installation (ohne „urpmi“)"
 
-#: install_steps_interactive.pm:645 standalone/drakxtv:52
+#: install_steps_interactive.pm:647 standalone/drakxtv:52
 #, c-format
 msgid "All"
 msgstr "Alle"
 
-#: install_steps_interactive.pm:684
+#: install_steps_interactive.pm:686
 #, c-format
 msgid ""
 "If you have all the CDs in the list below, click Ok.\n"
@@ -7438,17 +7441,17 @@ msgstr ""
 "falls nur einige der aufgeführten CDs fehlen, entfernen Sie die \n"
 "entsprechende Markierung und wählen Sie dann „OK“."
 
-#: install_steps_interactive.pm:689
+#: install_steps_interactive.pm:691
 #, c-format
 msgid "Cd-Rom labeled \"%s\""
 msgstr "CD-ROM „%s“"
 
-#: install_steps_interactive.pm:714
+#: install_steps_interactive.pm:716
 #, c-format
 msgid "Preparing installation"
 msgstr "Bereite Installation vor"
 
-#: install_steps_interactive.pm:722
+#: install_steps_interactive.pm:724
 #, c-format
 msgid ""
 "Installing package %s\n"
@@ -7457,24 +7460,24 @@ msgstr ""
 "Installiere Paket %s\n"
 "%d%%"
 
-#: install_steps_interactive.pm:771
+#: install_steps_interactive.pm:773
 #, c-format
 msgid "Post-install configuration"
 msgstr "Bereite weitere Konfiguration vor ..."
 
-#: install_steps_interactive.pm:778
+#: install_steps_interactive.pm:780
 #, c-format
 msgid "Please ensure the Update Modules media is in drive %s"
 msgstr ""
 "Bitte stellen Sie sicher, dass sich das Update-Modul-Medium im Laufwerk %s "
 "befindet"
 
-#: install_steps_interactive.pm:812
+#: install_steps_interactive.pm:814
 #, c-format
 msgid "Updates"
 msgstr "Aktualisierungen"
 
-#: install_steps_interactive.pm:813
+#: install_steps_interactive.pm:815
 #, c-format
 msgid ""
 "You now have the opportunity to download updated packages. These packages\n"
@@ -7494,7 +7497,7 @@ msgstr ""
 "\n"
 "Möchten Sie die Aktualisierungen vornehmen?"
 
-#: install_steps_interactive.pm:834
+#: install_steps_interactive.pm:836
 #, c-format
 msgid ""
 "Contacting Mandriva Linux web site to get the list of available mirrors..."
@@ -7502,67 +7505,67 @@ msgstr ""
 "Kontaktiere Mandriva Linux Web-Server, um eine Liste verfügbarer Pakete zu "
 "erhalten..."
 
-#: install_steps_interactive.pm:853
+#: install_steps_interactive.pm:855
 #, c-format
 msgid "Contacting the mirror to get the list of available packages..."
 msgstr "Kontaktiere Mirror, um eine Liste verfügbarer Pakete zu erhalten..."
 
-#: install_steps_interactive.pm:857
+#: install_steps_interactive.pm:859
 #, c-format
 msgid "Unable to contact mirror %s"
 msgstr "Mirror %s nicht erreichbar"
 
-#: install_steps_interactive.pm:857
+#: install_steps_interactive.pm:859
 #, c-format
 msgid "Would you like to try again?"
 msgstr "Wollen Sie es nochmal versuchen?"
 
-#: install_steps_interactive.pm:884 standalone/drakclock:45
+#: install_steps_interactive.pm:886 standalone/drakclock:45
 #, c-format
 msgid "Which is your timezone?"
 msgstr "Wählen Sie Ihre Zeitzone"
 
-#: install_steps_interactive.pm:889
+#: install_steps_interactive.pm:891
 #, c-format
 msgid "Automatic time synchronization (using NTP)"
 msgstr "Automatische Zeit-Synchronisation (durch NTP)"
 
-#: install_steps_interactive.pm:897
+#: install_steps_interactive.pm:899
 #, c-format
 msgid "NTP Server"
 msgstr "NTP-Server"
 
-#: install_steps_interactive.pm:952 install_steps_interactive.pm:960
-#: install_steps_interactive.pm:978 install_steps_interactive.pm:985
-#: install_steps_interactive.pm:1136 services.pm:133
+#: install_steps_interactive.pm:954 install_steps_interactive.pm:962
+#: install_steps_interactive.pm:980 install_steps_interactive.pm:987
+#: install_steps_interactive.pm:1138 services.pm:133
 #: standalone/drakbackup:1585
 #, c-format
 msgid "System"
 msgstr "System"
 
-#: install_steps_interactive.pm:992 install_steps_interactive.pm:1019
-#: install_steps_interactive.pm:1036 install_steps_interactive.pm:1052
-#: install_steps_interactive.pm:1063
+#: install_steps_interactive.pm:994 install_steps_interactive.pm:1021
+#: install_steps_interactive.pm:1038 install_steps_interactive.pm:1054
+#: install_steps_interactive.pm:1065
 #, c-format
 msgid "Hardware"
 msgstr "Hardware"
 
-#: install_steps_interactive.pm:998 install_steps_interactive.pm:1007
+#: install_steps_interactive.pm:1000 install_steps_interactive.pm:1009
 #, c-format
 msgid "Remote CUPS server"
 msgstr "CUPS-Server im Netzwerkbetrieb"
 
-#: install_steps_interactive.pm:998
+#: install_steps_interactive.pm:1000
 #, c-format
 msgid "No printer"
 msgstr "Kein Drucker"
 
-#: install_steps_interactive.pm:1040
+#: install_steps_interactive.pm:1042
 #, c-format
 msgid "Do you have an ISA sound card?"
 msgstr "Verfügen Sie über eine ISA-Soundkarte?"
 
-#: install_steps_interactive.pm:1042
+#: install_steps_interactive.pm:1044
 #, c-format
 msgid ""
 "Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
@@ -7571,71 +7574,71 @@ msgstr ""
 "Starten Sie „sndconfig“ oder „alsaconf“ nach der Installation, um Ihre "
 "Soundkarte einzurichten."
 
-#: install_steps_interactive.pm:1044
+#: install_steps_interactive.pm:1046
 #, c-format
 msgid "No sound card detected. Try \"harddrake\" after installation"
 msgstr ""
 "Es wurde keine Soundkarte gefunden. Versuchen Sie „harddrake“ nach der "
 "Installation."
 
-#: install_steps_interactive.pm:1064
+#: install_steps_interactive.pm:1066
 #, c-format
 msgid "Graphical interface"
 msgstr "Grafikumgebung"
 
-#: install_steps_interactive.pm:1070 install_steps_interactive.pm:1082
+#: install_steps_interactive.pm:1072 install_steps_interactive.pm:1084
 #, c-format
 msgid "Network & Internet"
 msgstr "Netzwerk & Internet"
 
-#: install_steps_interactive.pm:1084
+#: install_steps_interactive.pm:1086
 #, c-format
 msgid "configured"
 msgstr "konfiguriert"
 
-#: install_steps_interactive.pm:1093 install_steps_interactive.pm:1107
+#: install_steps_interactive.pm:1095 install_steps_interactive.pm:1109
 #: security/level.pm:55 steps.pm:20
 #, c-format
 msgid "Security"
 msgstr "Sicherheit"
 
-#: install_steps_interactive.pm:1112
+#: install_steps_interactive.pm:1114
 #, c-format
 msgid "activated"
 msgstr "aktiviert"
 
-#: install_steps_interactive.pm:1112
+#: install_steps_interactive.pm:1114
 #, c-format
 msgid "disabled"
 msgstr "deaktiviert"
 
-#: install_steps_interactive.pm:1123
+#: install_steps_interactive.pm:1125
 #, c-format
 msgid "Boot"
 msgstr "Start"
 
 #. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1127 printer/printerdrake.pm:961
+#: install_steps_interactive.pm:1129 printer/printerdrake.pm:961
 #, c-format
 msgid "%s on %s"
 msgstr "%s auf %s"
 
-#: install_steps_interactive.pm:1141 services.pm:175
+#: install_steps_interactive.pm:1143 services.pm:175
 #, c-format
 msgid "Services: %d activated for %d registered"
 msgstr "Dienste: %d aktiviert von %d registrierten"
 
-#: install_steps_interactive.pm:1153
+#: install_steps_interactive.pm:1155
 #, c-format
 msgid "You have not configured X. Are you sure you really want this?"
 msgstr "Sie haben X nicht konfiguriert. Sind Sie sicher?"
 
-#: install_steps_interactive.pm:1234
+#: install_steps_interactive.pm:1236
 #, c-format
 msgid "Preparing bootloader..."
 msgstr "Bereite Bootloader vor ..."
 
-#: install_steps_interactive.pm:1244
+#: install_steps_interactive.pm:1246
 #, c-format
 msgid ""
 "You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
@@ -7649,12 +7652,12 @@ msgstr ""
 "müssen um Ihren Rechner zu starten. Der Kernelparameter für das Root-"
 "Dateisystem ist: root=%s"
 
-#: install_steps_interactive.pm:1250
+#: install_steps_interactive.pm:1252
 #, c-format
 msgid "Do you want to use aboot?"
 msgstr "Möchten Sie „aboot“ verwenden?"
 
-#: install_steps_interactive.pm:1253
+#: install_steps_interactive.pm:1255
 #, c-format
 msgid ""
 "Error installing aboot, \n"
@@ -7664,7 +7667,7 @@ msgstr ""
 "mit Gewalt versuchen, auch wenn dies die Zerstörung der ersten \n"
 "Partition verursachen kann?"
 
-#: install_steps_interactive.pm:1270
+#: install_steps_interactive.pm:1272
 #, c-format
 msgid ""
 "In this security level, access to the files in the Windows partition is "
@@ -7673,22 +7676,22 @@ msgstr ""
 "In dieser Sicherheitseinstellung ist der Zugriff auf Datein der "
 "Windowspartition nur dem Administrator erlaubt"
 
-#: install_steps_interactive.pm:1299 standalone/drakautoinst:76
+#: install_steps_interactive.pm:1301 standalone/drakautoinst:76
 #, c-format
 msgid "Insert a blank floppy in drive %s"
 msgstr "Legen Sie eine leere Diskette in das %s ein."
 
-#: install_steps_interactive.pm:1304
+#: install_steps_interactive.pm:1306
 #, c-format
 msgid "Please insert another floppy for drivers disk"
 msgstr "Bitte legen Sie eine andere Diskette als Treiberdiskette ein"
 
-#: install_steps_interactive.pm:1306
+#: install_steps_interactive.pm:1308
 #, c-format
 msgid "Creating auto install floppy..."
 msgstr "Erstelle eine Auto-Installationsdiskette"
 
-#: install_steps_interactive.pm:1318
+#: install_steps_interactive.pm:1320
 #, c-format
 msgid ""
 "Some steps are not completed.\n"
@@ -7699,19 +7702,19 @@ msgstr ""
 "\n"
 "Wollen Sie DrakX wirklich beenden?"
 
-#: install_steps_interactive.pm:1328 standalone/draksambashare:422
+#: install_steps_interactive.pm:1330 standalone/draksambashare:422
 #: standalone/draksambashare:529 standalone/drakups:120 standalone/drakups:159
 #: standalone/logdrake:452 standalone/logdrake:458
 #, c-format
 msgid "Congratulations"
 msgstr "Herzlichen Glückwunsch!"
 
-#: install_steps_interactive.pm:1336 install_steps_interactive.pm:1337
+#: install_steps_interactive.pm:1338 install_steps_interactive.pm:1339
 #, c-format
 msgid "Generate auto install floppy"
 msgstr "Erstellen einer Auto-Installationsdiskette"
 
-#: install_steps_interactive.pm:1338
+#: install_steps_interactive.pm:1340
 #, c-format
 msgid ""
 "The auto install can be fully automated if wanted,\n"
@@ -7748,7 +7751,7 @@ msgid "Choose a file"
 msgstr "Wählen Sie eine Datei"
 
 #: interactive.pm:321 interactive/gtk.pm:508 standalone/drakbackup:1526
-#: standalone/drakfont:657 standalone/drakhosts:242 standalone/draknfs:605
+#: standalone/drakfont:656 standalone/drakhosts:242 standalone/draknfs:605
 #: standalone/draksambashare:1129 standalone/drakups:301
 #: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:319
 #: standalone/drakvpn:680
@@ -10362,49 +10365,49 @@ msgstr ""
 msgid "Use Interactive Firewall"
 msgstr "Interaktive Firewall verwenden"
 
-#: network/ifw.pm:138
+#: network/ifw.pm:129
 #, c-format
 msgid "Port scanning"
 msgstr "Portscanning"
 
-#: network/ifw.pm:139
+#: network/ifw.pm:130
 #, c-format
 msgid "Service attack"
 msgstr "Dienstangriff"
 
-#: network/ifw.pm:140
+#: network/ifw.pm:131
 #, c-format
 msgid "Password cracking"
 msgstr "Passwortknacken"
 
-#: network/ifw.pm:141
+#: network/ifw.pm:132
 #, c-format
 msgid "\"%s\" attack"
 msgstr "\"%s\" -Angriff"
 
-#: network/ifw.pm:143
+#: network/ifw.pm:134
 #, c-format
 msgid "A port scanning attack has been attempted by %s."
 msgstr "Ein Portscan-Angriff wurde durch %s versucht."
 
-#: network/ifw.pm:144
+#: network/ifw.pm:135
 #, c-format
 msgid "The %s service has been attacked by %s."
 msgstr "Der %s Dienst wurde durch %s angegriffen."
 
-#: network/ifw.pm:145
+#: network/ifw.pm:136
 #, c-format
 msgid "A password cracking attack has been attempted by %s."
 msgstr "Ein Passwort-Angriff wurde durch %s versucht."
 
-#: network/ifw.pm:146
+#: network/ifw.pm:137
 #, c-format
 msgid "A \"%s\" attack has been attempted by %s"
 msgstr "Ein \"%s\"-Angriff wurde durch %s versucht"
 
 #: network/isdn.pm:117 network/netconnect.pm:464 network/netconnect.pm:558
-#: network/netconnect.pm:561 network/netconnect.pm:704
-#: network/netconnect.pm:708
+#: network/netconnect.pm:561 network/netconnect.pm:709
+#: network/netconnect.pm:713
 #, c-format
 msgid "Unlisted - edit manually"
 msgstr "Nicht aufgeführt - manuell eintragen"
@@ -10673,12 +10676,12 @@ msgstr "DVB-Verbindung"
 msgid "Choose the connection you want to configure"
 msgstr "Wählen Sie die Verbindung, die Sie konfigurieren wollen"
 
-#: network/netconnect.pm:288 network/netconnect.pm:782
+#: network/netconnect.pm:288 network/netconnect.pm:787
 #, c-format
 msgid "Connection Configuration"
 msgstr "Verbindungskonfiguration"
 
-#: network/netconnect.pm:288 network/netconnect.pm:783
+#: network/netconnect.pm:288 network/netconnect.pm:788
 #, c-format
 msgid "Please fill or check the field below"
 msgstr ""
@@ -10690,7 +10693,7 @@ msgstr ""
 msgid "Your personal phone number"
 msgstr "Ihre eigene Telefonnummer"
 
-#: network/netconnect.pm:292 network/netconnect.pm:786
+#: network/netconnect.pm:292 network/netconnect.pm:791
 #, c-format
 msgid "Provider name (ex provider.net)"
 msgstr "Name des Providers (z.B. provider.net) "
@@ -10727,13 +10730,13 @@ msgid "Connection timeout (in sec)"
 msgstr "Verbindungs-Timeout (in Sec)"
 
 #: network/netconnect.pm:299 network/netconnect.pm:324
-#: network/netconnect.pm:789 standalone/drakconnect:491
+#: network/netconnect.pm:794 standalone/drakconnect:491
 #, c-format
 msgid "Account Login (user name)"
 msgstr "Benutzername (Login)"
 
 #: network/netconnect.pm:300 network/netconnect.pm:325
-#: network/netconnect.pm:790 standalone/drakconnect:492
+#: network/netconnect.pm:795 standalone/drakconnect:492
 #, c-format
 msgid "Account Password"
 msgstr "Passwort"
@@ -10775,13 +10778,13 @@ msgid "Use BPALogin (needed for Telstra)"
 msgstr "Benutze BPALogin (Für Telstra nötig)"
 
 #: network/netconnect.pm:349 network/netconnect.pm:671
-#: network/netconnect.pm:822 network/netconnect.pm:1167
+#: network/netconnect.pm:827 network/netconnect.pm:1172
 #, c-format
 msgid "Select the network interface to configure:"
 msgstr "Wählen Sie die Netzwerkkarte zum konfigurieren"
 
 #: network/netconnect.pm:351 network/netconnect.pm:386
-#: network/netconnect.pm:672 network/netconnect.pm:824 network/shorewall.pm:70
+#: network/netconnect.pm:672 network/netconnect.pm:829 network/shorewall.pm:70
 #: standalone/drakconnect:713
 #, c-format
 msgid "Net Device"
@@ -10879,7 +10882,7 @@ msgstr ""
 "Sollte er nicht aufgeführt sein, wählen Sie „Nicht aufgeführt“"
 
 #: network/netconnect.pm:463 network/netconnect.pm:557
-#: network/netconnect.pm:703
+#: network/netconnect.pm:708
 #, c-format
 msgid "Provider:"
 msgstr "Provider:"
@@ -10938,7 +10941,7 @@ msgstr "Verbindungsaufbau: IP Parameter"
 msgid "IP parameters"
 msgstr "IP Parameter"
 
-#: network/netconnect.pm:603 network/netconnect.pm:938
+#: network/netconnect.pm:603 network/netconnect.pm:943
 #: printer/printerdrake.pm:460 standalone/drakconnect:109
 #: standalone/drakconnect:316 standalone/drakconnect:882
 #: standalone/drakhosts:197 standalone/drakroam:122 standalone/drakups:286
@@ -10966,13 +10969,13 @@ msgstr "DNS"
 msgid "Domain name"
 msgstr "Name der Domäne"
 
-#: network/netconnect.pm:621 network/netconnect.pm:787
+#: network/netconnect.pm:621 network/netconnect.pm:792
 #: standalone/drakconnect:992
 #, c-format
 msgid "First DNS Server (optional)"
 msgstr "Erster DNS-Server (optional)"
 
-#: network/netconnect.pm:622 network/netconnect.pm:788
+#: network/netconnect.pm:622 network/netconnect.pm:793
 #: standalone/drakconnect:993
 #, c-format
 msgid "Second DNS Server (optional)"
@@ -10998,12 +11001,12 @@ msgstr "Gateway IP-Adresse"
 msgid "ADSL configuration"
 msgstr "ADSL-Konfiguration"
 
-#: network/netconnect.pm:701
+#: network/netconnect.pm:706
 #, c-format
 msgid "Please choose your ADSL provider"
 msgstr "Bitte wählen Sie Ihren ADSL-Anbieter."
 
-#: network/netconnect.pm:731
+#: network/netconnect.pm:736
 #, c-format
 msgid ""
 "Please choose your DSL connection type.\n"
@@ -11012,47 +11015,47 @@ msgstr ""
 "Bitte wählen Sie Ihren DSL-Verbindungstyp.\n"
 "Wenn Sie ihn nicht kennen, behalten Sie den vorausgewählten Typ bei."
 
-#: network/netconnect.pm:734
+#: network/netconnect.pm:739
 #, c-format
 msgid "ADSL connection type:"
 msgstr "Art der ADSL-Verbindung:"
 
-#: network/netconnect.pm:792
+#: network/netconnect.pm:797
 #, c-format
 msgid "Virtual Path ID (VPI):"
 msgstr "Virtuelle Pfad-ID (VPI):"
 
-#: network/netconnect.pm:793
+#: network/netconnect.pm:798
 #, c-format
 msgid "Virtual Circuit ID (VCI):"
 msgstr "Virtual Circuit ID (VCI):"
 
-#: network/netconnect.pm:796
+#: network/netconnect.pm:801
 #, c-format
 msgid "Encapsulation:"
 msgstr "Einkapselung"
 
-#: network/netconnect.pm:826
+#: network/netconnect.pm:831
 #, c-format
 msgid "Manually load a driver"
 msgstr "Treiber von Hand laden"
 
-#: network/netconnect.pm:827
+#: network/netconnect.pm:832
 #, c-format
 msgid "Use a Windows driver (with ndiswrapper)"
 msgstr "Verwende einen Windowstreiber (mit ndiswrapper)"
 
-#: network/netconnect.pm:893
+#: network/netconnect.pm:898
 #, c-format
 msgid "Zeroconf hostname resolution"
 msgstr "Zeroconf-Namensauflösung"
 
-#: network/netconnect.pm:894 network/netconnect.pm:925
+#: network/netconnect.pm:899 network/netconnect.pm:930
 #, c-format
 msgid "Configuring network device %s (driver %s)"
 msgstr "Konfiguriere Netzwerkgerät %s (Treiber %s)."
 
-#: network/netconnect.pm:895
+#: network/netconnect.pm:900
 #, c-format
 msgid ""
 "The following protocols can be used to configure a LAN connection. Please "
@@ -11061,7 +11064,7 @@ msgstr ""
 "Die folgenden Protokolle können verwendet werden, um eine LAN-Verbindung zu "
 "konfigurieren. Bitte wählen Sie ein Protokoll aus."
 
-#: network/netconnect.pm:926
+#: network/netconnect.pm:931
 #, c-format
 msgid ""
 "Please enter the IP configuration for this machine.\n"
@@ -11072,199 +11075,199 @@ msgstr ""
 "Jeder Eintrag muss als dezimale IP-Adresse in Punktschreibweise \n"
 "angegeben werden (etwa  „192.168.1.42“)."
 
-#: network/netconnect.pm:933 standalone/drakconnect:373
+#: network/netconnect.pm:938 standalone/drakconnect:373
 #, c-format
 msgid "Assign host name from DHCP address"
 msgstr "Name des Hosts über DHCP zuweisen"
 
-#: network/netconnect.pm:934 standalone/drakconnect:375
+#: network/netconnect.pm:939 standalone/drakconnect:375
 #, c-format
 msgid "DHCP host name"
 msgstr "DHCP-Rechnername"
 
-#: network/netconnect.pm:939 standalone/drakconnect:321
+#: network/netconnect.pm:944 standalone/drakconnect:321
 #: standalone/drakconnect:883 standalone/drakgw:181
 #, c-format
 msgid "Netmask"
 msgstr "Netzmaske"
 
-#: network/netconnect.pm:941 standalone/drakconnect:437
+#: network/netconnect.pm:946 standalone/drakconnect:437
 #, c-format
 msgid "Track network card id (useful for laptops)"
 msgstr "Netzwerkkarten-ID überwachen (sinnvoll für Laptops)"
 
-#: network/netconnect.pm:942 standalone/drakconnect:438
+#: network/netconnect.pm:947 standalone/drakconnect:438
 #, c-format
 msgid "Network Hotplugging"
 msgstr "Netzwerk Hotplugging"
 
-#: network/netconnect.pm:944 standalone/drakconnect:432
+#: network/netconnect.pm:949 standalone/drakconnect:432
 #, c-format
 msgid "Start at boot"
 msgstr "Beim Systemstart aktivieren"
 
-#: network/netconnect.pm:946 standalone/drakconnect:460
+#: network/netconnect.pm:951 standalone/drakconnect:460
 #, c-format
 msgid "Metric"
 msgstr "Metrisch"
 
-#: network/netconnect.pm:947
+#: network/netconnect.pm:952
 #, c-format
 msgid "Enable IPv6 to IPv4 tunnel"
 msgstr "Aktiviere IPv6-zu-IPv4-Tunnel"
 
-#: network/netconnect.pm:949 standalone/drakconnect:369
+#: network/netconnect.pm:954 standalone/drakconnect:369
 #: standalone/drakconnect:886
 #, c-format
 msgid "DHCP client"
 msgstr "DHCP-Client"
 
-#: network/netconnect.pm:951 standalone/drakconnect:379
+#: network/netconnect.pm:956 standalone/drakconnect:379
 #, c-format
 msgid "DHCP timeout (in seconds)"
 msgstr "DHCP-Zeitschranke (in Sekunden)"
 
-#: network/netconnect.pm:952 standalone/drakconnect:382
+#: network/netconnect.pm:957 standalone/drakconnect:382
 #, c-format
 msgid "Get DNS servers from DHCP"
 msgstr "DNS-Server via DHCP bekommen"
 
-#: network/netconnect.pm:953 standalone/drakconnect:383
+#: network/netconnect.pm:958 standalone/drakconnect:383
 #, c-format
 msgid "Get YP servers from DHCP"
 msgstr "YP-Server via DHCP bekommen"
 
-#: network/netconnect.pm:954 standalone/drakconnect:384
+#: network/netconnect.pm:959 standalone/drakconnect:384
 #, c-format
 msgid "Get NTPD servers from DHCP"
 msgstr "NTPD-Server via DHCP bekommen"
 
-#: network/netconnect.pm:962 printer/printerdrake.pm:1876
+#: network/netconnect.pm:967 printer/printerdrake.pm:1876
 #: standalone/drakconnect:676
 #, c-format
 msgid "IP address should be in format 1.2.3.4"
 msgstr "Die IP-Adresse sollte etwa die Form „192.168.1.42“ haben!"
 
-#: network/netconnect.pm:966 standalone/drakconnect:680
+#: network/netconnect.pm:971 standalone/drakconnect:680
 #, c-format
 msgid "Netmask should be in format 255.255.224.0"
 msgstr "Die Netzmaske sollte das Format 255.255.224.0 haben"
 
-#: network/netconnect.pm:970
+#: network/netconnect.pm:975
 #, c-format
 msgid "Warning: IP address %s is usually reserved!"
 msgstr "Warnung : IP-Adresse %s ist üblicherweise reserviert !"
 
-#: network/netconnect.pm:975 standalone/drakTermServ:1856
+#: network/netconnect.pm:980 standalone/drakTermServ:1856
 #: standalone/drakTermServ:1857 standalone/drakTermServ:1858
 #, c-format
 msgid "%s already in use\n"
 msgstr "%s bereits anderweitig genutzt\n"
 
-#: network/netconnect.pm:1015
+#: network/netconnect.pm:1020
 #, c-format
 msgid "Choose an ndiswrapper driver"
 msgstr "Wählen Sie einen ndiswrapper-Treiber"
 
-#: network/netconnect.pm:1017
+#: network/netconnect.pm:1022
 #, c-format
 msgid "Use the ndiswrapper driver %s"
 msgstr "Verwende den ndiswrapper-Treiber %s"
 
-#: network/netconnect.pm:1017
+#: network/netconnect.pm:1022
 #, c-format
 msgid "Install a new driver"
 msgstr "Einen neuen Treiber installieren"
 
-#: network/netconnect.pm:1029
+#: network/netconnect.pm:1034
 #, c-format
 msgid "Select a device:"
 msgstr "Wählen Sie ein Gerät aus:"
 
-#: network/netconnect.pm:1058
+#: network/netconnect.pm:1063
 #, c-format
 msgid "Please enter the wireless parameters for this card:"
 msgstr ""
 "Bitte geben Sie die Parameter für die drahtlose Verbindung dieser Karte ein:"
 
-#: network/netconnect.pm:1061 standalone/drakconnect:404
+#: network/netconnect.pm:1066 standalone/drakconnect:404
 #: standalone/drakroam:52
 #, c-format
 msgid "Operating Mode"
 msgstr "Betriebsmodus"
 
-#: network/netconnect.pm:1062
+#: network/netconnect.pm:1067
 #, c-format
 msgid "Ad-hoc"
 msgstr "Spontan"
 
-#: network/netconnect.pm:1062
+#: network/netconnect.pm:1067
 #, c-format
 msgid "Managed"
 msgstr "Geführt"
 
-#: network/netconnect.pm:1062
+#: network/netconnect.pm:1067
 #, c-format
 msgid "Master"
 msgstr "Master"
 
-#: network/netconnect.pm:1062
+#: network/netconnect.pm:1067
 #, c-format
 msgid "Repeater"
 msgstr "Repeater"
 
-#: network/netconnect.pm:1062
+#: network/netconnect.pm:1067
 #, c-format
 msgid "Secondary"
 msgstr "Sekundär"
 
-#: network/netconnect.pm:1062
+#: network/netconnect.pm:1067
 #, c-format
 msgid "Auto"
 msgstr "Automatisch"
 
-#: network/netconnect.pm:1065 standalone/drakconnect:405
+#: network/netconnect.pm:1070 standalone/drakconnect:405
 #: standalone/drakroam:115
 #, c-format
 msgid "Network name (ESSID)"
 msgstr "Netzwerkname (ESSID)"
 
-#: network/netconnect.pm:1066 standalone/drakroam:116
+#: network/netconnect.pm:1071 standalone/drakroam:116
 #, c-format
 msgid "Encryption mode"
 msgstr "Verschlüsselungsmodus"
 
-#: network/netconnect.pm:1071
+#: network/netconnect.pm:1076
 #, c-format
 msgid "Allow access point roaming"
 msgstr "Erlaube Access Point Roaming"
 
-#: network/netconnect.pm:1073 standalone/drakconnect:406
+#: network/netconnect.pm:1078 standalone/drakconnect:406
 #, c-format
 msgid "Network ID"
 msgstr "Netzwerk-ID"
 
-#: network/netconnect.pm:1074 standalone/drakconnect:407
+#: network/netconnect.pm:1079 standalone/drakconnect:407
 #, c-format
 msgid "Operating frequency"
 msgstr "Übertragungsfrequenz:"
 
-#: network/netconnect.pm:1075 standalone/drakconnect:408
+#: network/netconnect.pm:1080 standalone/drakconnect:408
 #, c-format
 msgid "Sensitivity threshold"
 msgstr "Empfindlichkeitsschwelle"
 
-#: network/netconnect.pm:1076 standalone/drakconnect:409
+#: network/netconnect.pm:1081 standalone/drakconnect:409
 #, c-format
 msgid "Bitrate (in b/s)"
 msgstr "Bitrate (in b/s)"
 
-#: network/netconnect.pm:1077 standalone/drakconnect:420
+#: network/netconnect.pm:1082 standalone/drakconnect:420
 #, c-format
 msgid "RTS/CTS"
 msgstr "RTS/CTS"
 
-#: network/netconnect.pm:1078
+#: network/netconnect.pm:1083
 #, c-format
 msgid ""
 "RTS/CTS adds a handshake before each packet transmission to make sure that "
@@ -11285,17 +11288,17 @@ msgstr ""
 "dieses Verfahren aus. Sie können diesen Parameter auch auf „auto“, „fest“ "
 "oder „aus“ stellen."
 
-#: network/netconnect.pm:1085 standalone/drakconnect:421
+#: network/netconnect.pm:1090 standalone/drakconnect:421
 #, c-format
 msgid "Fragmentation"
 msgstr "Fragmentierung"
 
-#: network/netconnect.pm:1086 standalone/drakconnect:422
+#: network/netconnect.pm:1091 standalone/drakconnect:422
 #, c-format
 msgid "iwconfig command extra arguments"
 msgstr "Zusätzlche Schalter für den Befehl lwconfig"
 
-#: network/netconnect.pm:1087
+#: network/netconnect.pm:1092
 #, c-format
 msgid ""
 "Here, one can configure some extra wireless parameters such as:\n"
@@ -11310,12 +11313,12 @@ msgstr ""
 "Die iwconfig(8) Manpages liefern weitere Informationen."
 
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1094 standalone/drakconnect:423
+#: network/netconnect.pm:1099 standalone/drakconnect:423
 #, c-format
 msgid "iwspy command extra arguments"
 msgstr "Zusätzliche Schalter für den Befehl lwspy"
 
-#: network/netconnect.pm:1095
+#: network/netconnect.pm:1100
 #, c-format
 msgid ""
 "iwspy is used to set a list of addresses in a wireless network\n"
@@ -11334,12 +11337,12 @@ msgstr ""
 "\n"
 "Die iwpspy(8) Manpages liefern weitere Informationen."
 
-#: network/netconnect.pm:1104 standalone/drakconnect:424
+#: network/netconnect.pm:1109 standalone/drakconnect:424
 #, c-format
 msgid "iwpriv command extra arguments"
 msgstr "Extra-Schalter für den Befehl lwpriv"
 
-#: network/netconnect.pm:1105
+#: network/netconnect.pm:1110
 #, c-format
 msgid ""
 "iwpriv enable to set up optionals (private) parameters of a wireless "
@@ -11369,7 +11372,7 @@ msgstr ""
 "\n"
 "Die Manpages zu iwpriv(8) geben weitere Informationen."
 
-#: network/netconnect.pm:1120
+#: network/netconnect.pm:1125
 #, c-format
 msgid ""
 "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
@@ -11379,7 +11382,7 @@ msgstr ""
 "(etwa „2.46G“ für 2,46GHz) oder die entsprechende Anzahl Nullen angehängt "
 "werden."
 
-#: network/netconnect.pm:1124
+#: network/netconnect.pm:1129
 #, c-format
 msgid ""
 "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
@@ -11388,37 +11391,37 @@ msgstr ""
 "Die Rate sollte entweder eine Mengeneinheit aus ‚K‘, ‚M‘ und ‚G‘ nutzen "
 "(etwa „11M“ für 11M) oder die entsprechende Anzahl Nullen angehängt werden."
 
-#: network/netconnect.pm:1167
+#: network/netconnect.pm:1172
 #, c-format
 msgid "DVB configuration"
 msgstr "DVB-Konfiguration"
 
-#: network/netconnect.pm:1168
+#: network/netconnect.pm:1173
 #, c-format
 msgid "DVB Adapter"
 msgstr "DVB-Anschluss"
 
-#: network/netconnect.pm:1185
+#: network/netconnect.pm:1190
 #, c-format
 msgid "DVB adapter settings"
 msgstr "DVB-Anschluss-Einstellungen"
 
-#: network/netconnect.pm:1188
+#: network/netconnect.pm:1193
 #, c-format
 msgid "Adapter card"
 msgstr "Anschlusskarte"
 
-#: network/netconnect.pm:1189
+#: network/netconnect.pm:1194
 #, c-format
 msgid "Net demux"
 msgstr "Netz-Demultiplexer"
 
-#: network/netconnect.pm:1190
+#: network/netconnect.pm:1195
 #, c-format
 msgid "PID"
 msgstr "PID"
 
-#: network/netconnect.pm:1218
+#: network/netconnect.pm:1223
 #, c-format
 msgid ""
 "Please enter your host name.\n"
@@ -11431,70 +11434,70 @@ msgstr ""
 "etwa „meinrechner.meineabteilung.meinefirma.de“.\n"
 "Falls Sie ein Gateway verwenden, sollten Sie auch dessen IP-Adresse angeben."
 
-#: network/netconnect.pm:1223
+#: network/netconnect.pm:1228
 #, c-format
 msgid "Last but not least you can also type in your DNS server IP addresses."
 msgstr "Zuguterletzt kann die DNS Server IP Adresse eingegeben werden."
 
-#: network/netconnect.pm:1225 standalone/drakconnect:991
+#: network/netconnect.pm:1230 standalone/drakconnect:991
 #, c-format
 msgid "Host name (optional)"
 msgstr "Rechnername (optional)"
 
-#: network/netconnect.pm:1225 standalone/drakhosts:197
+#: network/netconnect.pm:1230 standalone/drakhosts:197
 #, c-format
 msgid "Host name"
 msgstr "Rechnername"
 
-#: network/netconnect.pm:1227
+#: network/netconnect.pm:1232
 #, c-format
 msgid "DNS server 1"
 msgstr "DNS-Server 1"
 
-#: network/netconnect.pm:1228
+#: network/netconnect.pm:1233
 #, c-format
 msgid "DNS server 2"
 msgstr "DNS-Server 2"
 
-#: network/netconnect.pm:1229
+#: network/netconnect.pm:1234
 #, c-format
 msgid "DNS server 3"
 msgstr "DNS-Server 3"
 
-#: network/netconnect.pm:1230
+#: network/netconnect.pm:1235
 #, c-format
 msgid "Search domain"
 msgstr "Suchdomäne"
 
-#: network/netconnect.pm:1231
+#: network/netconnect.pm:1236
 #, c-format
 msgid "By default search domain will be set from the fully-qualified host name"
 msgstr ""
 "Standardmäßig wird die Suchdomäne aus dem FQDN (fully qualified domain name) "
 "erzeugt."
 
-#: network/netconnect.pm:1232
+#: network/netconnect.pm:1237
 #, c-format
 msgid "Gateway (e.g. %s)"
 msgstr "Gateway (etwa %s)"
 
-#: network/netconnect.pm:1234
+#: network/netconnect.pm:1239
 #, c-format
 msgid "Gateway device"
 msgstr "Gateway-Gerät"
 
-#: network/netconnect.pm:1243
+#: network/netconnect.pm:1248
 #, c-format
 msgid "DNS server address should be in format 1.2.3.4"
 msgstr ""
 "Die IP-Adresse des DNS-Servers sollte etwa die Form „192.168.1.42“ haben!"
 
-#: network/netconnect.pm:1248 standalone/drakconnect:685
+#: network/netconnect.pm:1253 standalone/drakconnect:685
 #, c-format
 msgid "Gateway address should be in format 1.2.3.4"
 msgstr "Die IP-Adresse des Gateways sollte etwa die Form „192.168.1.42“ haben!"
 
-#: network/netconnect.pm:1261
+#: network/netconnect.pm:1266
 #, c-format
 msgid ""
 "If desired, enter a Zeroconf hostname.\n"
@@ -11507,67 +11510,67 @@ msgstr ""
 "freigegebenen Ressourcen verwendet, die nicht vom Netzwerk\n"
 "verwaltet werden. In den meisten Netzwerken ist das nicht nötig."
 
-#: network/netconnect.pm:1265
+#: network/netconnect.pm:1270
 #, c-format
 msgid "Zeroconf Host name"
 msgstr "Zeroconf-Rechnername"
 
-#: network/netconnect.pm:1268
+#: network/netconnect.pm:1273
 #, c-format
 msgid "Zeroconf host name must not contain a ."
 msgstr "Der Zeroconf-Hostname muss einen . enthalten."
 
-#: network/netconnect.pm:1278
+#: network/netconnect.pm:1283
 #, c-format
 msgid "Do you want to allow users to start the connection?"
 msgstr "Möchten Sie Benutzern erlauben, diese Verbindung zu starten?"
 
-#: network/netconnect.pm:1291
+#: network/netconnect.pm:1296
 #, c-format
 msgid "Do you want to start the connection at boot?"
 msgstr "Möchten Sie die Verbindung beim Systemstart herstellen?"
 
-#: network/netconnect.pm:1307
+#: network/netconnect.pm:1312
 #, c-format
 msgid "Automatically at boot"
 msgstr "Automatisch beim Systemstart"
 
-#: network/netconnect.pm:1309
+#: network/netconnect.pm:1314
 #, c-format
 msgid "By using Net Applet in the system tray"
 msgstr "Durch das Net Applet in der Kontrollleiste"
 
-#: network/netconnect.pm:1311
+#: network/netconnect.pm:1316
 #, c-format
 msgid "Manually (the interface would still be activated at boot)"
 msgstr "von Hand (die Schnittstelle wird trotzdem bei Systemstart aktiviert)"
 
-#: network/netconnect.pm:1320
+#: network/netconnect.pm:1325
 #, c-format
 msgid "How do you want to dial this connection?"
 msgstr "Wie möchten Sie diese Verbindung wählen?"
 
-#: network/netconnect.pm:1333
+#: network/netconnect.pm:1338
 #, c-format
 msgid "Do you want to try to connect to the Internet now?"
 msgstr "Möchten Sie jetzt versuchen eine Internetverbindung aufzubauen?"
 
-#: network/netconnect.pm:1341 standalone/drakconnect:1023
+#: network/netconnect.pm:1346 standalone/drakconnect:1023
 #, c-format
 msgid "Testing your connection..."
 msgstr "Ich teste gerade Ihre Verbindung..."
 
-#: network/netconnect.pm:1366
+#: network/netconnect.pm:1371
 #, c-format
 msgid "The system is now connected to the Internet."
 msgstr "Das System ist jetzt mit dem Internet verbunden."
 
-#: network/netconnect.pm:1367
+#: network/netconnect.pm:1372
 #, c-format
 msgid "For security reasons, it will be disconnected now."
 msgstr "Aus Sicherheitsgründen wird die Verbindung nun unterbrochen."
 
-#: network/netconnect.pm:1368
+#: network/netconnect.pm:1373
 #, c-format
 msgid ""
 "The system does not seem to be connected to the Internet.\n"
@@ -11576,7 +11579,7 @@ msgstr ""
 "Das System scheint nicht mit dem Internet verbunden zu sein.\n"
 "Versuchen Sie noch einmal Ihre Verbindung zu konfigurieren."
 
-#: network/netconnect.pm:1383
+#: network/netconnect.pm:1388
 #, c-format
 msgid ""
 "Congratulations, the network and Internet configuration is finished.\n"
@@ -11585,7 +11588,7 @@ msgstr ""
 "Herzlichen Glückwunsch, die Netzwerk-/Internet-Einrichtung ist beendet.\n"
 "\n"
 
-#: network/netconnect.pm:1386
+#: network/netconnect.pm:1391
 #, c-format
 msgid ""
 "After this is done, we recommend that you restart your X environment to "
@@ -11595,7 +11598,7 @@ msgstr ""
 "neu zu starten, um Probleme, die durch die Änderung des\n"
 "Rechnernamens hervorgerufen werden, zu vermeiden."
 
-#: network/netconnect.pm:1387
+#: network/netconnect.pm:1392
 #, c-format
 msgid ""
 "Problems occurred during configuration.\n"
@@ -11607,28 +11610,28 @@ msgstr ""
 "Kontrollzentrum. Falls die Verbindung nicht funktioniert, sollten Sie erneut "
 "die Konfiguration starten."
 
-#: network/netconnect.pm:1398
+#: network/netconnect.pm:1403
 #, c-format
 msgid "(detected on port %s)"
 msgstr "(gefunden an Port %s)"
 
 #. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#: network/netconnect.pm:1400
+#: network/netconnect.pm:1405
 #, c-format
 msgid "(detected %s)"
 msgstr "(%s gefunden)"
 
-#: network/netconnect.pm:1400
+#: network/netconnect.pm:1405
 #, c-format
 msgid "(detected)"
 msgstr "(gefunden)"
 
-#: network/netconnect.pm:1401
+#: network/netconnect.pm:1406
 #, c-format
 msgid "Network Configuration"
 msgstr "Netzwerk konfigurieren"
 
-#: network/netconnect.pm:1402
+#: network/netconnect.pm:1407
 #, c-format
 msgid ""
 "Because you are doing a network installation, your network is already "
@@ -11641,12 +11644,12 @@ msgstr ""
 "„Abbrechen“, um Ihre Internet- und Netzwerk-Konfiguration neu zu\n"
 "konfigurieren.\n"
 
-#: network/netconnect.pm:1405
+#: network/netconnect.pm:1410
 #, c-format
 msgid "The network needs to be restarted. Do you want to restart it?"
 msgstr "Das Netzwerk muss neu gestartet werden. Soll ich es neu starten?"
 
-#: network/netconnect.pm:1406
+#: network/netconnect.pm:1411
 #, c-format
 msgid ""
 "A problem occurred while restarting the network: \n"
@@ -11657,7 +11660,7 @@ msgstr ""
 "\n"
 "%s"
 
-#: network/netconnect.pm:1407
+#: network/netconnect.pm:1412
 #, c-format
 msgid ""
 "We are now going to configure the %s connection.\n"
@@ -11670,12 +11673,12 @@ msgstr ""
 "\n"
 "Wählen Sie „%s“, um fortzufahren."
 
-#: network/netconnect.pm:1408
+#: network/netconnect.pm:1413
 #, c-format
 msgid "Configuration is complete, do you want to apply settings?"
 msgstr "Konfiguration ist vollständig, wollen Sie diese jetzt anwenden ?"
 
-#: network/netconnect.pm:1409
+#: network/netconnect.pm:1414
 #, c-format
 msgid ""
 "You have configured multiple ways to connect to the Internet.\n"
@@ -11686,12 +11689,12 @@ msgstr ""
 "Internet zu verbinden. Bitte wählen Sie eine aus.\n"
 "\n"
 
-#: network/netconnect.pm:1410
+#: network/netconnect.pm:1415
 #, c-format
 msgid "Internet connection"
 msgstr "Internet-Verbindung"
 
-#: network/netconnect.pm:1427
+#: network/netconnect.pm:1432
 #, c-format
 msgid ""
 "An unexpected error has happened:\n"
@@ -18950,7 +18953,7 @@ msgstr "Die Browser-Caches nicht archivieren"
 msgid "Select the files or directories and click on 'OK'"
 msgstr "Wählen Sie die Dateien oder Verzeichnisse und drücken Sie auf „OK“."
 
-#: standalone/drakbackup:1527 standalone/drakfont:658
+#: standalone/drakbackup:1527 standalone/drakfont:657
 #, c-format
 msgid "Remove Selected"
 msgstr "Markierte entfernen"
@@ -20871,109 +20874,109 @@ msgstr ""
 "Sie werden alle laufenden Programme beenden und Ihre aktuelle Sitzung "
 "beenden.Sind Sie sicher, dass Sie dem dm-Dienst neustarten wollen?"
 
-#: standalone/drakfont:183
+#: standalone/drakfont:182
 #, c-format
 msgid "Search installed fonts"
 msgstr "Installierte Schriftarten suchen"
 
-#: standalone/drakfont:185
+#: standalone/drakfont:184
 #, c-format
 msgid "Unselect fonts installed"
 msgstr "Auswahl installierter Schriftarten zurücksetzen"
 
-#: standalone/drakfont:208
+#: standalone/drakfont:207
 #, c-format
 msgid "parse all fonts"
 msgstr "Alle Schriftarten analysieren"
 
-#: standalone/drakfont:210
+#: standalone/drakfont:209
 #, c-format
 msgid "No fonts found"
 msgstr "Keine Schriftarten gefunden"
 
-#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
-#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
-#: standalone/drakfont:412 standalone/drakfont:426
+#: standalone/drakfont:217 standalone/drakfont:259 standalone/drakfont:326
+#: standalone/drakfont:359 standalone/drakfont:367 standalone/drakfont:393
+#: standalone/drakfont:411 standalone/drakfont:425
 #, c-format
 msgid "done"
 msgstr "Fertig"
 
-#: standalone/drakfont:223
+#: standalone/drakfont:222
 #, c-format
 msgid "Could not find any font in your mounted partitions"
 msgstr "Ich konnte keine Schriften in Ihren eingehängten Partitionen finden"
 
-#: standalone/drakfont:258
+#: standalone/drakfont:257
 #, c-format
 msgid "Reselect correct fonts"
 msgstr "Neuwahl korrekter Schriftarten"
 
-#: standalone/drakfont:261
+#: standalone/drakfont:260
 #, c-format
 msgid "Could not find any font.\n"
 msgstr "Konnte keine Schriftarten finden.\n"
 
-#: standalone/drakfont:271
+#: standalone/drakfont:270
 #, c-format
 msgid "Search for fonts in installed list"
 msgstr "Suche installierter Schriften"
 
-#: standalone/drakfont:296
+#: standalone/drakfont:295
 #, c-format
 msgid "%s fonts conversion"
 msgstr "%sSchriftkonvertierung"
 
-#: standalone/drakfont:325
+#: standalone/drakfont:324
 #, c-format
 msgid "Fonts copy"
 msgstr "Schriftarten-Kopie"
 
-#: standalone/drakfont:328
+#: standalone/drakfont:327
 #, c-format
 msgid "True Type fonts installation"
 msgstr "Installation von TrueType-Schriftarten"
 
-#: standalone/drakfont:335
+#: standalone/drakfont:334
 #, c-format
 msgid "please wait during ttmkfdir..."
 msgstr "Bitte warten Sie - ttmkfdir arbeitet ..."
 
-#: standalone/drakfont:336
+#: standalone/drakfont:335
 #, c-format
 msgid "True Type install done"
 msgstr "TrueType-Installation beendet"
 
-#: standalone/drakfont:342 standalone/drakfont:357
+#: standalone/drakfont:341 standalone/drakfont:356
 #, c-format
 msgid "type1inst building"
 msgstr "Erzeuge „type1inst“"
 
-#: standalone/drakfont:351
+#: standalone/drakfont:350
 #, c-format
 msgid "Ghostscript referencing"
 msgstr "Ghostscriptreferenz"
 
-#: standalone/drakfont:361
+#: standalone/drakfont:360
 #, c-format
 msgid "Suppress Temporary Files"
 msgstr "Temporäre Dateien löschen"
 
-#: standalone/drakfont:364
+#: standalone/drakfont:363
 #, c-format
 msgid "Restart XFS"
 msgstr "Neustart des X-Font-Servers"
 
-#: standalone/drakfont:410 standalone/drakfont:420
+#: standalone/drakfont:409 standalone/drakfont:419
 #, c-format
 msgid "Suppress Fonts Files"
 msgstr "Schriftartdateien unterdrücken"
 
-#: standalone/drakfont:422
+#: standalone/drakfont:421
 #, c-format
 msgid "xfs restart"
 msgstr "Neustart des X-Font-Servers"
 
-#: standalone/drakfont:430
+#: standalone/drakfont:429
 #, c-format
 msgid ""
 "Before installing any fonts, be sure that you have the right to use and "
@@ -20988,38 +20991,38 @@ msgstr ""
 "Sie können die Schriftarten auf normalem Weg einbinden. In seltenen "
 "Fällenkönnen defekte Schriftarten den X-Server lahmlegen."
 
-#: standalone/drakfont:474 standalone/drakfont:483
+#: standalone/drakfont:473 standalone/drakfont:482
 #, c-format
 msgid "DrakFont"
 msgstr "DrakFont"
 
-#: standalone/drakfont:484
+#: standalone/drakfont:483
 #, c-format
 msgid "Font List"
 msgstr "Font-Liste"
 
-#: standalone/drakfont:487
+#: standalone/drakfont:486
 #, c-format
 msgid "Get Windows Fonts"
 msgstr "Windows-Schriftarten holen"
 
-#: standalone/drakfont:493
+#: standalone/drakfont:492
 #, c-format
 msgid "About"
 msgstr "Über"
 
-#: standalone/drakfont:495 standalone/drakfont:689 standalone/drakfont:727
+#: standalone/drakfont:494 standalone/drakfont:686 standalone/drakfont:724
 #, c-format
 msgid "Uninstall"
 msgstr "Deinstallieren"
 
-#: standalone/drakfont:496
+#: standalone/drakfont:495
 #, c-format
 msgid "Import"
 msgstr "Importieren"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakfont:514
+#: standalone/drakfont:513
 #, c-format
 msgid ""
 "Copyright (C) 2001-2002 by Mandriva \n"
@@ -21040,7 +21043,7 @@ msgstr ""
 "\n"
 "       VIGNAUD Thierry <tvignaud@mandriva.com>"
 
-#: standalone/drakfont:523
+#: standalone/drakfont:522
 #, c-format
 msgid ""
 "This program is free software; you can redistribute it and/or modify\n"
@@ -21076,7 +21079,7 @@ msgstr ""
 " Programm erhalten haben. Wenn nicht, schreiben Sie an die Free Software\n"
 " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
 
-#: standalone/drakfont:539
+#: standalone/drakfont:538
 #, c-format
 msgid ""
 "Thanks:\n"
@@ -21108,114 +21111,114 @@ msgstr ""
 "\t von Andreq Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
 "          Konvertiert ttf-Schriftdateien in afm- und pfb-Schriften\n"
 
-#: standalone/drakfont:558
+#: standalone/drakfont:557
 #, c-format
 msgid "Choose the applications that will support the fonts:"
 msgstr "Wählen Sie die Programme, die die Schriftarten verwenden sollen:"
 
-#: standalone/drakfont:569
+#: standalone/drakfont:568
 #, c-format
 msgid "Ghostscript"
 msgstr "Ghostscript"
 
-#: standalone/drakfont:570
+#: standalone/drakfont:569
 #, c-format
 msgid "StarOffice"
 msgstr "StarOffice"
 
-#: standalone/drakfont:571
+#: standalone/drakfont:570
 #, c-format
 msgid "Abiword"
 msgstr "Abiword"
 
-#: standalone/drakfont:572
+#: standalone/drakfont:571
 #, c-format
 msgid "Generic Printers"
 msgstr "Generische Drucker"
 
-#: standalone/drakfont:586
+#: standalone/drakfont:585
 #, c-format
 msgid "Select the font file or directory and click on 'Add'"
 msgstr ""
 "Wählen Sie eine Schriftartdatei bzw. ein Verzeichnis und betätigen Sie "
 "„Hinzufügen“"
 
-#: standalone/drakfont:587
+#: standalone/drakfont:586
 #, c-format
 msgid "File Selection"
 msgstr "Dateiauswahl"
 
-#: standalone/drakfont:591
+#: standalone/drakfont:590
 #, c-format
 msgid "Fonts"
 msgstr "Schriftarten"
 
-#: standalone/drakfont:654
+#: standalone/drakfont:653
 #, c-format
 msgid "Import fonts"
 msgstr "Schriftarten importieren"
 
-#: standalone/drakfont:659
+#: standalone/drakfont:658
 #, c-format
 msgid "Install fonts"
 msgstr "Schriftarten installieren"
 
-#: standalone/drakfont:694
+#: standalone/drakfont:691
 #, c-format
 msgid "click here if you are sure."
 msgstr "Klicken Sie hier, wenn Sie sicher sind."
 
-#: standalone/drakfont:696
+#: standalone/drakfont:693
 #, c-format
 msgid "here if no."
 msgstr "Hier, falls nicht."
 
-#: standalone/drakfont:735
+#: standalone/drakfont:732
 #, c-format
 msgid "Unselected All"
 msgstr "Markierung löschen"
 
-#: standalone/drakfont:738
+#: standalone/drakfont:735
 #, c-format
 msgid "Selected All"
 msgstr "Alle auswählen"
 
-#: standalone/drakfont:741
+#: standalone/drakfont:738
 #, c-format
 msgid "Remove List"
 msgstr "Liste entfernen"
 
-#: standalone/drakfont:752 standalone/drakfont:771
+#: standalone/drakfont:749 standalone/drakfont:768
 #, c-format
 msgid "Importing fonts"
 msgstr "Importiere Schriftarten"
 
-#: standalone/drakfont:756 standalone/drakfont:776
+#: standalone/drakfont:753 standalone/drakfont:773
 #, c-format
 msgid "Initial tests"
 msgstr "Vortests"
 
-#: standalone/drakfont:757
+#: standalone/drakfont:754
 #, c-format
 msgid "Copy fonts on your system"
 msgstr "Schriftarten auf Ihren Rechner kopieren"
 
-#: standalone/drakfont:758
+#: standalone/drakfont:755
 #, c-format
 msgid "Install & convert Fonts"
 msgstr "Schriftarten installieren und konvertieren"
 
-#: standalone/drakfont:759
+#: standalone/drakfont:756
 #, c-format
 msgid "Post Install"
 msgstr "Nach der Installation"
 
-#: standalone/drakfont:777
+#: standalone/drakfont:774
 #, c-format
 msgid "Remove fonts on your system"
 msgstr "Entfernen von Schriftarten auf Ihrem Rechner"
 
-#: standalone/drakfont:778
+#: standalone/drakfont:775
 #, c-format
 msgid "Post Uninstall"
 msgstr "Nach dem Entfernen"
@@ -25049,6 +25052,11 @@ msgstr ""
 "\n"
 "http://www.mandrivalinux.com/en/hardware.php3"
 
+#: standalone/finish-install:38 standalone/keyboarddrake:30
+#, c-format
+msgid "Please, choose your keyboard layout."
+msgstr "Bitte wählen Sie Ihren Tastaturtyp."
+
 #: standalone/harddrake2:25
 #, c-format
 msgid "Alternative drivers"
@@ -25867,11 +25875,6 @@ msgstr "Zugang:"
 msgid "Hostname:"
 msgstr "Rechnername:"
 
-#: standalone/keyboarddrake:30
-#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Bitte wählen Sie Ihren Tastaturtyp."
-
 #: standalone/keyboarddrake:45
 #, c-format
 msgid "Do you want the BackSpace to return Delete in console?"
@@ -27166,11 +27169,6 @@ msgstr "Installationsart auswählen"
 msgid "Choose your keyboard"
 msgstr "Tastatur auswählen"
 
-#: steps.pm:21
-#, c-format
-msgid "Partitioning"
-msgstr "Partitionierung"
-
 #: steps.pm:22
 #, c-format
 msgid "Format partitions"
@@ -27285,6 +27283,21 @@ msgstr ""
 msgid "Installation failed"
 msgstr "Die Installation schlug fehl!"
 
+#~ msgid ""
+#~ "Allow an ordinary user to mount the file system. The\n"
+#~ "name of the mounting user is written to mtab so that he can unmount the "
+#~ "file\n"
+#~ "system again. This option implies the options noexec, nosuid, and nodev\n"
+#~ "(unless overridden by subsequent options, as in the option line\n"
+#~ "user,exec,dev,suid )."
+#~ msgstr ""
+#~ "Einem normalen Benutzer das Einhängen des Dateisystem erlauben.\n"
+#~ "Der Benutzername wird in mtab eingetragen, so dass er das Datei-\n"
+#~ "system auch wieder aushängen kann.\n"
+#~ "Diese Option beinhaltet die Optionen noexec, nosuid und nodec\n"
+#~ "(solange nicht nachträglich durch eine der Optionen user, exec, dev \n"
+#~ "oder suid überschrieben)."
+
 #~ msgid "Unknown Model"
 #~ msgstr "Unbekanntes Modell"
 
-- 
cgit v1.2.1