From e28254af5950ef7ec29dc924731f0215a8e78263 Mon Sep 17 00:00:00 2001 From: Pablo Saratxaga Date: Sun, 26 Aug 2001 04:16:44 +0000 Subject: updated pot file --- perl-install/share/po/DrakX.pot | 2650 +++++++++++++++++---------------------- 1 file changed, 1139 insertions(+), 1511 deletions(-) (limited to 'perl-install/share/po/DrakX.pot') diff --git a/perl-install/share/po/DrakX.pot b/perl-install/share/po/DrakX.pot index a407bb002..d98323f1d 100644 --- a/perl-install/share/po/DrakX.pot +++ b/perl-install/share/po/DrakX.pot @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2001-08-21 14:27+0200\n" +"POT-Creation-Date: 2001-08-25 21:33+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -533,14 +533,14 @@ msgid "Delay before booting default image" msgstr "" #: ../../any.pm_.c:161 ../../any.pm_.c:731 -#: ../../install_steps_interactive.pm_.c:944 ../../network/modem.pm_.c:46 -#: ../../printerdrake.pm_.c:352 ../../printerdrake.pm_.c:431 -#: ../../standalone/draknet_.c:591 +#: ../../install_steps_interactive.pm_.c:942 ../../network/modem.pm_.c:46 +#: ../../printerdrake.pm_.c:341 ../../printerdrake.pm_.c:415 +#: ../../standalone/draknet_.c:592 msgid "Password" msgstr "" #: ../../any.pm_.c:162 ../../any.pm_.c:732 -#: ../../install_steps_interactive.pm_.c:945 +#: ../../install_steps_interactive.pm_.c:943 msgid "Password (again)" msgstr "" @@ -575,12 +575,12 @@ msgid "" msgstr "" #: ../../any.pm_.c:175 ../../any.pm_.c:708 -#: ../../install_steps_interactive.pm_.c:939 +#: ../../install_steps_interactive.pm_.c:937 msgid "Please try again" msgstr "" #: ../../any.pm_.c:175 ../../any.pm_.c:708 -#: ../../install_steps_interactive.pm_.c:939 +#: ../../install_steps_interactive.pm_.c:937 msgid "The passwords do not match" msgstr "" @@ -619,9 +619,9 @@ msgid "Add" msgstr "" #: ../../any.pm_.c:221 ../../any.pm_.c:719 ../../diskdrake.pm_.c:176 -#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1281 -#: ../../printerdrake.pm_.c:1282 ../../printerdrake.pm_.c:1318 -#: ../../printerdrake.pm_.c:1352 +#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1204 +#: ../../printerdrake.pm_.c:1205 ../../printerdrake.pm_.c:1239 +#: ../../printerdrake.pm_.c:1271 msgid "Done" msgstr "" @@ -720,12 +720,12 @@ msgid "Do you have any %s interfaces?" msgstr "" #: ../../any.pm_.c:602 ../../any.pm_.c:761 ../../interactive.pm_.c:110 -#: ../../my_gtk.pm_.c:672 +#: ../../my_gtk.pm_.c:674 msgid "No" msgstr "" #: ../../any.pm_.c:602 ../../any.pm_.c:760 ../../interactive.pm_.c:110 -#: ../../my_gtk.pm_.c:672 +#: ../../my_gtk.pm_.c:674 msgid "Yes" msgstr "" @@ -836,8 +836,8 @@ msgstr "" msgid "Real name" msgstr "" -#: ../../any.pm_.c:730 ../../printerdrake.pm_.c:351 -#: ../../printerdrake.pm_.c:430 +#: ../../any.pm_.c:730 ../../printerdrake.pm_.c:340 +#: ../../printerdrake.pm_.c:414 msgid "User name" msgstr "" @@ -997,20 +997,20 @@ msgstr "" #: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:105 #: ../../standalone/draknet_.c:137 ../../standalone/draknet_.c:201 -#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:421 -#: ../../standalone/draknet_.c:495 ../../standalone/draknet_.c:531 -#: ../../standalone/draknet_.c:632 +#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:422 +#: ../../standalone/draknet_.c:496 ../../standalone/draknet_.c:532 +#: ../../standalone/draknet_.c:633 msgid "OK" msgstr "" -#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:504 +#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:503 #: ../../interactive.pm_.c:120 ../../interactive.pm_.c:284 #: ../../interactive.pm_.c:304 ../../interactive_stdio.pm_.c:27 -#: ../../my_gtk.pm_.c:413 ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:673 -#: ../../printerdrake.pm_.c:970 ../../standalone/drakgw_.c:648 +#: ../../my_gtk.pm_.c:415 ../../my_gtk.pm_.c:418 ../../my_gtk.pm_.c:675 +#: ../../printerdrake.pm_.c:894 ../../standalone/drakgw_.c:648 #: ../../standalone/draknet_.c:112 ../../standalone/draknet_.c:144 -#: ../../standalone/draknet_.c:306 ../../standalone/draknet_.c:507 -#: ../../standalone/draknet_.c:646 ../../standalone/tinyfirewall_.c:63 +#: ../../standalone/draknet_.c:306 ../../standalone/draknet_.c:508 +#: ../../standalone/draknet_.c:647 ../../standalone/tinyfirewall_.c:63 msgid "Cancel" msgstr "" @@ -1063,8 +1063,8 @@ msgstr "" msgid "Please make a backup of your data first" msgstr "" -#: ../../diskdrake.pm_.c:102 ../../diskdrake_interactive.pm_.c:755 -#: ../../diskdrake_interactive.pm_.c:764 ../../diskdrake_interactive.pm_.c:818 +#: ../../diskdrake.pm_.c:102 ../../diskdrake_interactive.pm_.c:760 +#: ../../diskdrake_interactive.pm_.c:769 ../../diskdrake_interactive.pm_.c:823 msgid "Read carefully!" msgstr "" @@ -1091,7 +1091,7 @@ msgid "Remote" msgstr "" #: ../../diskdrake.pm_.c:224 ../../diskdrake.pm_.c:453 -#: ../../diskdrake_interactive.pm_.c:323 ../../diskdrake_interactive.pm_.c:475 +#: ../../diskdrake_interactive.pm_.c:326 ../../diskdrake_interactive.pm_.c:480 msgid "Mount point" msgstr "" @@ -1100,16 +1100,16 @@ msgid "Options" msgstr "" #: ../../diskdrake.pm_.c:227 ../../diskdrake.pm_.c:400 -#: ../../diskdrake.pm_.c:509 ../../diskdrake_interactive.pm_.c:322 -#: ../../diskdrake_interactive.pm_.c:443 +#: ../../diskdrake.pm_.c:509 ../../diskdrake_interactive.pm_.c:327 +#: ../../diskdrake_interactive.pm_.c:448 msgid "Type" msgstr "" -#: ../../diskdrake.pm_.c:239 ../../diskdrake_interactive.pm_.c:331 +#: ../../diskdrake.pm_.c:239 ../../diskdrake_interactive.pm_.c:335 msgid "Unmount" msgstr "" -#: ../../diskdrake.pm_.c:240 ../../diskdrake_interactive.pm_.c:327 +#: ../../diskdrake.pm_.c:240 ../../diskdrake_interactive.pm_.c:331 msgid "Mount" msgstr "" @@ -1129,7 +1129,7 @@ msgstr "" msgid "Please click on a partition" msgstr "" -#: ../../diskdrake.pm_.c:270 ../../install_steps_gtk.pm_.c:505 +#: ../../diskdrake.pm_.c:270 ../../install_steps_gtk.pm_.c:504 msgid "Details" msgstr "" @@ -1153,12 +1153,12 @@ msgstr "" msgid "Swap" msgstr "" -#: ../../diskdrake.pm_.c:379 ../../diskdrake_interactive.pm_.c:876 +#: ../../diskdrake.pm_.c:379 ../../diskdrake_interactive.pm_.c:879 msgid "Empty" msgstr "" -#: ../../diskdrake.pm_.c:379 ../../install_steps_gtk.pm_.c:361 -#: ../../install_steps_gtk.pm_.c:421 ../../mouse.pm_.c:145 +#: ../../diskdrake.pm_.c:379 ../../install_steps_gtk.pm_.c:360 +#: ../../install_steps_gtk.pm_.c:420 ../../mouse.pm_.c:145 msgid "Other" msgstr "" @@ -1166,7 +1166,7 @@ msgstr "" msgid "Filesystem types:" msgstr "" -#: ../../diskdrake.pm_.c:400 ../../diskdrake_interactive.pm_.c:344 +#: ../../diskdrake.pm_.c:400 ../../diskdrake_interactive.pm_.c:349 msgid "Create" msgstr "" @@ -1175,7 +1175,7 @@ msgstr "" msgid "Use ``%s'' instead" msgstr "" -#: ../../diskdrake.pm_.c:402 ../../diskdrake_interactive.pm_.c:321 +#: ../../diskdrake.pm_.c:402 ../../diskdrake_interactive.pm_.c:336 msgid "Delete" msgstr "" @@ -1183,13 +1183,13 @@ msgstr "" msgid "Use ``Unmount'' first" msgstr "" -#: ../../diskdrake.pm_.c:407 ../../diskdrake_interactive.pm_.c:435 +#: ../../diskdrake.pm_.c:407 ../../diskdrake_interactive.pm_.c:440 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" -#: ../../diskdrake.pm_.c:452 ../../diskdrake_interactive.pm_.c:474 +#: ../../diskdrake.pm_.c:452 ../../diskdrake_interactive.pm_.c:479 #, c-format msgid "Where do you want to mount device %s?" msgstr "" @@ -1210,7 +1210,7 @@ msgstr "" msgid "Change type" msgstr "" -#: ../../diskdrake.pm_.c:508 ../../diskdrake_interactive.pm_.c:442 +#: ../../diskdrake.pm_.c:508 ../../diskdrake_interactive.pm_.c:447 msgid "Which filesystem do you want?" msgstr "" @@ -1232,315 +1232,319 @@ msgstr "" msgid "Scanning available samba shared resource of server %s" msgstr "" -#: ../../diskdrake_interactive.pm_.c:161 +#: ../../diskdrake_interactive.pm_.c:162 msgid "Choose a partition" msgstr "" -#: ../../diskdrake_interactive.pm_.c:161 +#: ../../diskdrake_interactive.pm_.c:162 msgid "Choose another partition" msgstr "" -#: ../../diskdrake_interactive.pm_.c:183 +#: ../../diskdrake_interactive.pm_.c:186 msgid "Exit" msgstr "" -#: ../../diskdrake_interactive.pm_.c:205 +#: ../../diskdrake_interactive.pm_.c:208 msgid "Toggle to expert mode" msgstr "" -#: ../../diskdrake_interactive.pm_.c:205 +#: ../../diskdrake_interactive.pm_.c:208 msgid "Toggle to normal mode" msgstr "" -#: ../../diskdrake_interactive.pm_.c:205 +#: ../../diskdrake_interactive.pm_.c:208 msgid "Undo" msgstr "" -#: ../../diskdrake_interactive.pm_.c:205 +#: ../../diskdrake_interactive.pm_.c:208 msgid "Wizard" msgstr "" -#: ../../diskdrake_interactive.pm_.c:224 +#: ../../diskdrake_interactive.pm_.c:227 msgid "Continue anyway?" msgstr "" -#: ../../diskdrake_interactive.pm_.c:229 +#: ../../diskdrake_interactive.pm_.c:232 msgid "Quit without saving" msgstr "" -#: ../../diskdrake_interactive.pm_.c:229 +#: ../../diskdrake_interactive.pm_.c:232 msgid "Quit without writing the partition table?" msgstr "" -#: ../../diskdrake_interactive.pm_.c:240 +#: ../../diskdrake_interactive.pm_.c:235 +msgid "Do you want to save /etc/fstab modifications" +msgstr "" + +#: ../../diskdrake_interactive.pm_.c:245 msgid "Auto allocate" msgstr "" -#: ../../diskdrake_interactive.pm_.c:240 +#: ../../diskdrake_interactive.pm_.c:245 msgid "Clear all" msgstr "" -#: ../../diskdrake_interactive.pm_.c:243 +#: ../../diskdrake_interactive.pm_.c:248 msgid "Hard drive information" msgstr "" -#: ../../diskdrake_interactive.pm_.c:260 +#: ../../diskdrake_interactive.pm_.c:265 msgid "Not enough space for auto-allocating" msgstr "" -#: ../../diskdrake_interactive.pm_.c:266 +#: ../../diskdrake_interactive.pm_.c:271 msgid "All primary partitions are used" msgstr "" -#: ../../diskdrake_interactive.pm_.c:267 +#: ../../diskdrake_interactive.pm_.c:272 msgid "I can't add any more partition" msgstr "" -#: ../../diskdrake_interactive.pm_.c:268 +#: ../../diskdrake_interactive.pm_.c:273 msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" -#: ../../diskdrake_interactive.pm_.c:276 ../../diskdrake_interactive.pm_.c:293 +#: ../../diskdrake_interactive.pm_.c:281 ../../diskdrake_interactive.pm_.c:298 msgid "Select file" msgstr "" -#: ../../diskdrake_interactive.pm_.c:284 +#: ../../diskdrake_interactive.pm_.c:289 msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" -#: ../../diskdrake_interactive.pm_.c:294 +#: ../../diskdrake_interactive.pm_.c:299 msgid "Warning" msgstr "" -#: ../../diskdrake_interactive.pm_.c:295 +#: ../../diskdrake_interactive.pm_.c:300 msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" -#: ../../diskdrake_interactive.pm_.c:303 +#: ../../diskdrake_interactive.pm_.c:308 msgid "Trying to rescue partition table" msgstr "" -#: ../../diskdrake_interactive.pm_.c:309 +#: ../../diskdrake_interactive.pm_.c:314 msgid "Detailed information" msgstr "" -#: ../../diskdrake_interactive.pm_.c:324 ../../diskdrake_interactive.pm_.c:541 +#: ../../diskdrake_interactive.pm_.c:328 ../../diskdrake_interactive.pm_.c:546 msgid "Resize" msgstr "" -#: ../../diskdrake_interactive.pm_.c:325 ../../diskdrake_interactive.pm_.c:581 +#: ../../diskdrake_interactive.pm_.c:329 ../../diskdrake_interactive.pm_.c:586 msgid "Move" msgstr "" -#: ../../diskdrake_interactive.pm_.c:326 +#: ../../diskdrake_interactive.pm_.c:330 msgid "Format" msgstr "" -#: ../../diskdrake_interactive.pm_.c:328 +#: ../../diskdrake_interactive.pm_.c:332 msgid "Active" msgstr "" -#: ../../diskdrake_interactive.pm_.c:329 +#: ../../diskdrake_interactive.pm_.c:333 msgid "Add to RAID" msgstr "" -#: ../../diskdrake_interactive.pm_.c:330 +#: ../../diskdrake_interactive.pm_.c:334 msgid "Add to LVM" msgstr "" -#: ../../diskdrake_interactive.pm_.c:332 +#: ../../diskdrake_interactive.pm_.c:337 msgid "Remove from RAID" msgstr "" -#: ../../diskdrake_interactive.pm_.c:333 +#: ../../diskdrake_interactive.pm_.c:338 msgid "Remove from LVM" msgstr "" -#: ../../diskdrake_interactive.pm_.c:334 +#: ../../diskdrake_interactive.pm_.c:339 msgid "Modify RAID" msgstr "" -#: ../../diskdrake_interactive.pm_.c:335 +#: ../../diskdrake_interactive.pm_.c:340 msgid "Use for loopback" msgstr "" -#: ../../diskdrake_interactive.pm_.c:378 +#: ../../diskdrake_interactive.pm_.c:383 msgid "Create a new partition" msgstr "" -#: ../../diskdrake_interactive.pm_.c:381 +#: ../../diskdrake_interactive.pm_.c:386 msgid "Start sector: " msgstr "" -#: ../../diskdrake_interactive.pm_.c:383 ../../diskdrake_interactive.pm_.c:688 +#: ../../diskdrake_interactive.pm_.c:388 ../../diskdrake_interactive.pm_.c:693 msgid "Size in MB: " msgstr "" -#: ../../diskdrake_interactive.pm_.c:384 ../../diskdrake_interactive.pm_.c:689 +#: ../../diskdrake_interactive.pm_.c:389 ../../diskdrake_interactive.pm_.c:694 msgid "Filesystem type: " msgstr "" -#: ../../diskdrake_interactive.pm_.c:385 ../../diskdrake_interactive.pm_.c:860 -#: ../../diskdrake_interactive.pm_.c:932 +#: ../../diskdrake_interactive.pm_.c:390 ../../diskdrake_interactive.pm_.c:863 +#: ../../diskdrake_interactive.pm_.c:935 msgid "Mount point: " msgstr "" -#: ../../diskdrake_interactive.pm_.c:389 +#: ../../diskdrake_interactive.pm_.c:394 msgid "Preference: " msgstr "" -#: ../../diskdrake_interactive.pm_.c:441 +#: ../../diskdrake_interactive.pm_.c:446 msgid "Change partition type" msgstr "" -#: ../../diskdrake_interactive.pm_.c:446 +#: ../../diskdrake_interactive.pm_.c:451 msgid "Switching from ext2 to ext3" msgstr "" -#: ../../diskdrake_interactive.pm_.c:473 +#: ../../diskdrake_interactive.pm_.c:478 #, c-format msgid "Where do you want to mount loopback file %s?" msgstr "" -#: ../../diskdrake_interactive.pm_.c:480 +#: ../../diskdrake_interactive.pm_.c:485 msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" -#: ../../diskdrake_interactive.pm_.c:500 +#: ../../diskdrake_interactive.pm_.c:505 msgid "Computing FAT filesystem bounds" msgstr "" -#: ../../diskdrake_interactive.pm_.c:500 ../../diskdrake_interactive.pm_.c:556 +#: ../../diskdrake_interactive.pm_.c:505 ../../diskdrake_interactive.pm_.c:561 #: ../../install_interactive.pm_.c:112 msgid "Resizing" msgstr "" -#: ../../diskdrake_interactive.pm_.c:529 +#: ../../diskdrake_interactive.pm_.c:534 msgid "This partition is not resizeable" msgstr "" -#: ../../diskdrake_interactive.pm_.c:534 +#: ../../diskdrake_interactive.pm_.c:539 msgid "All data on this partition should be backed-up" msgstr "" -#: ../../diskdrake_interactive.pm_.c:536 +#: ../../diskdrake_interactive.pm_.c:541 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" -#: ../../diskdrake_interactive.pm_.c:541 +#: ../../diskdrake_interactive.pm_.c:546 msgid "Choose the new size" msgstr "" -#: ../../diskdrake_interactive.pm_.c:542 +#: ../../diskdrake_interactive.pm_.c:547 msgid "New size in MB: " msgstr "" -#: ../../diskdrake_interactive.pm_.c:582 +#: ../../diskdrake_interactive.pm_.c:587 msgid "Which disk do you want to move it to?" msgstr "" -#: ../../diskdrake_interactive.pm_.c:583 +#: ../../diskdrake_interactive.pm_.c:588 msgid "Sector" msgstr "" -#: ../../diskdrake_interactive.pm_.c:584 +#: ../../diskdrake_interactive.pm_.c:589 msgid "Which sector do you want to move it to?" msgstr "" -#: ../../diskdrake_interactive.pm_.c:587 +#: ../../diskdrake_interactive.pm_.c:592 msgid "Moving" msgstr "" -#: ../../diskdrake_interactive.pm_.c:587 +#: ../../diskdrake_interactive.pm_.c:592 msgid "Moving partition..." msgstr "" -#: ../../diskdrake_interactive.pm_.c:593 ../../diskdrake_interactive.pm_.c:835 +#: ../../diskdrake_interactive.pm_.c:598 ../../diskdrake_interactive.pm_.c:838 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" -#: ../../diskdrake_interactive.pm_.c:595 ../../diskdrake_interactive.pm_.c:837 +#: ../../diskdrake_interactive.pm_.c:600 ../../diskdrake_interactive.pm_.c:840 msgid "Formatting" msgstr "" -#: ../../diskdrake_interactive.pm_.c:596 ../../diskdrake_interactive.pm_.c:838 +#: ../../diskdrake_interactive.pm_.c:601 ../../diskdrake_interactive.pm_.c:841 #, c-format msgid "Formatting loopback file %s" msgstr "" -#: ../../diskdrake_interactive.pm_.c:597 ../../diskdrake_interactive.pm_.c:839 +#: ../../diskdrake_interactive.pm_.c:602 ../../diskdrake_interactive.pm_.c:842 #: ../../install_steps_interactive.pm_.c:427 #, c-format msgid "Formatting partition %s" msgstr "" -#: ../../diskdrake_interactive.pm_.c:614 +#: ../../diskdrake_interactive.pm_.c:619 msgid "Choose an existing RAID to add to" msgstr "" -#: ../../diskdrake_interactive.pm_.c:615 ../../diskdrake_interactive.pm_.c:633 +#: ../../diskdrake_interactive.pm_.c:620 ../../diskdrake_interactive.pm_.c:638 msgid "new" msgstr "" -#: ../../diskdrake_interactive.pm_.c:631 +#: ../../diskdrake_interactive.pm_.c:636 msgid "Choose an existing LVM to add to" msgstr "" -#: ../../diskdrake_interactive.pm_.c:636 +#: ../../diskdrake_interactive.pm_.c:641 msgid "LVM name?" msgstr "" -#: ../../diskdrake_interactive.pm_.c:673 +#: ../../diskdrake_interactive.pm_.c:678 msgid "This partition can't be used for loopback" msgstr "" -#: ../../diskdrake_interactive.pm_.c:686 +#: ../../diskdrake_interactive.pm_.c:691 msgid "Loopback" msgstr "" -#: ../../diskdrake_interactive.pm_.c:687 +#: ../../diskdrake_interactive.pm_.c:692 msgid "Loopback file name: " msgstr "" -#: ../../diskdrake_interactive.pm_.c:694 +#: ../../diskdrake_interactive.pm_.c:699 msgid "File already used by another loopback, choose another one" msgstr "" -#: ../../diskdrake_interactive.pm_.c:695 +#: ../../diskdrake_interactive.pm_.c:700 msgid "File already exists. Use it?" msgstr "" -#: ../../diskdrake_interactive.pm_.c:738 +#: ../../diskdrake_interactive.pm_.c:743 msgid "device" msgstr "" -#: ../../diskdrake_interactive.pm_.c:739 +#: ../../diskdrake_interactive.pm_.c:744 msgid "level" msgstr "" -#: ../../diskdrake_interactive.pm_.c:740 +#: ../../diskdrake_interactive.pm_.c:745 msgid "chunk size" msgstr "" -#: ../../diskdrake_interactive.pm_.c:755 +#: ../../diskdrake_interactive.pm_.c:760 msgid "Be careful: this operation is dangerous." msgstr "" -#: ../../diskdrake_interactive.pm_.c:770 +#: ../../diskdrake_interactive.pm_.c:775 msgid "What type of partitioning?" msgstr "" -#: ../../diskdrake_interactive.pm_.c:788 +#: ../../diskdrake_interactive.pm_.c:793 msgid "" "Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " "1024).\n" @@ -1548,7 +1552,7 @@ msgid "" "need /boot" msgstr "" -#: ../../diskdrake_interactive.pm_.c:792 +#: ../../diskdrake_interactive.pm_.c:797 msgid "" "The partition you've selected to add as root (/) is physically located " "beyond\n" @@ -1556,109 +1560,109 @@ msgid "" "If you plan to use the LILO boot manager, be careful to add a /boot partition" msgstr "" -#: ../../diskdrake_interactive.pm_.c:798 +#: ../../diskdrake_interactive.pm_.c:803 msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "So be careful to add a /boot partition" msgstr "" -#: ../../diskdrake_interactive.pm_.c:818 +#: ../../diskdrake_interactive.pm_.c:823 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "" -#: ../../diskdrake_interactive.pm_.c:824 +#: ../../diskdrake_interactive.pm_.c:827 msgid "You'll need to reboot before the modification can take place" msgstr "" -#: ../../diskdrake_interactive.pm_.c:861 ../../diskdrake_interactive.pm_.c:918 +#: ../../diskdrake_interactive.pm_.c:864 ../../diskdrake_interactive.pm_.c:921 msgid "Device: " msgstr "" -#: ../../diskdrake_interactive.pm_.c:862 +#: ../../diskdrake_interactive.pm_.c:865 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "" -#: ../../diskdrake_interactive.pm_.c:866 ../../diskdrake_interactive.pm_.c:874 -#: ../../diskdrake_interactive.pm_.c:936 +#: ../../diskdrake_interactive.pm_.c:869 ../../diskdrake_interactive.pm_.c:877 +#: ../../diskdrake_interactive.pm_.c:939 msgid "Type: " msgstr "" -#: ../../diskdrake_interactive.pm_.c:870 +#: ../../diskdrake_interactive.pm_.c:873 msgid "Name: " msgstr "" -#: ../../diskdrake_interactive.pm_.c:878 +#: ../../diskdrake_interactive.pm_.c:881 #, c-format msgid "Start: sector %s\n" msgstr "" -#: ../../diskdrake_interactive.pm_.c:879 +#: ../../diskdrake_interactive.pm_.c:882 #, c-format msgid "Size: %s" msgstr "" -#: ../../diskdrake_interactive.pm_.c:881 +#: ../../diskdrake_interactive.pm_.c:884 #, c-format msgid ", %s sectors" msgstr "" -#: ../../diskdrake_interactive.pm_.c:883 +#: ../../diskdrake_interactive.pm_.c:886 #, c-format msgid "Cylinder %d to cylinder %d\n" msgstr "" -#: ../../diskdrake_interactive.pm_.c:884 +#: ../../diskdrake_interactive.pm_.c:887 msgid "Formatted\n" msgstr "" -#: ../../diskdrake_interactive.pm_.c:885 +#: ../../diskdrake_interactive.pm_.c:888 msgid "Not formatted\n" msgstr "" -#: ../../diskdrake_interactive.pm_.c:886 +#: ../../diskdrake_interactive.pm_.c:889 msgid "Mounted\n" msgstr "" -#: ../../diskdrake_interactive.pm_.c:887 +#: ../../diskdrake_interactive.pm_.c:890 #, c-format msgid "RAID md%s\n" msgstr "" -#: ../../diskdrake_interactive.pm_.c:889 +#: ../../diskdrake_interactive.pm_.c:892 #, c-format msgid "Loopback file(s): %s\n" msgstr "" -#: ../../diskdrake_interactive.pm_.c:890 +#: ../../diskdrake_interactive.pm_.c:893 msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" -#: ../../diskdrake_interactive.pm_.c:892 +#: ../../diskdrake_interactive.pm_.c:895 #, c-format msgid "Level %s\n" msgstr "" -#: ../../diskdrake_interactive.pm_.c:893 +#: ../../diskdrake_interactive.pm_.c:896 #, c-format msgid "Chunk size %s\n" msgstr "" -#: ../../diskdrake_interactive.pm_.c:894 +#: ../../diskdrake_interactive.pm_.c:897 #, c-format msgid "RAID-disks %s\n" msgstr "" -#: ../../diskdrake_interactive.pm_.c:896 +#: ../../diskdrake_interactive.pm_.c:899 #, c-format msgid "Loopback file name: %s" msgstr "" -#: ../../diskdrake_interactive.pm_.c:899 +#: ../../diskdrake_interactive.pm_.c:902 msgid "" "\n" "Chances are, this partition is\n" @@ -1666,7 +1670,7 @@ msgid "" "probably leave it alone.\n" msgstr "" -#: ../../diskdrake_interactive.pm_.c:902 +#: ../../diskdrake_interactive.pm_.c:905 msgid "" "\n" "This special Bootstrap\n" @@ -1674,65 +1678,65 @@ msgid "" "dual-booting your system.\n" msgstr "" -#: ../../diskdrake_interactive.pm_.c:919 +#: ../../diskdrake_interactive.pm_.c:922 #, c-format msgid "Size: %s\n" msgstr "" -#: ../../diskdrake_interactive.pm_.c:920 +#: ../../diskdrake_interactive.pm_.c:923 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "" -#: ../../diskdrake_interactive.pm_.c:921 +#: ../../diskdrake_interactive.pm_.c:924 msgid "Info: " msgstr "" -#: ../../diskdrake_interactive.pm_.c:922 +#: ../../diskdrake_interactive.pm_.c:925 #, c-format msgid "LVM-disks %s\n" msgstr "" -#: ../../diskdrake_interactive.pm_.c:923 +#: ../../diskdrake_interactive.pm_.c:926 #, c-format msgid "Partition table type: %s\n" msgstr "" -#: ../../diskdrake_interactive.pm_.c:924 +#: ../../diskdrake_interactive.pm_.c:927 #, c-format msgid "on bus %d id %d\n" msgstr "" -#: ../../diskdrake_interactive.pm_.c:938 +#: ../../diskdrake_interactive.pm_.c:941 #, c-format msgid "Options: %s" msgstr "" -#: ../../fs.pm_.c:391 ../../fs.pm_.c:400 ../../fs.pm_.c:404 ../../fs.pm_.c:408 -#: ../../fs.pm_.c:412 ../../fs.pm_.c:416 +#: ../../fs.pm_.c:400 ../../fs.pm_.c:409 ../../fs.pm_.c:413 ../../fs.pm_.c:417 +#: ../../fs.pm_.c:421 ../../fs.pm_.c:425 #, c-format msgid "%s formatting of %s failed" msgstr "" -#: ../../fs.pm_.c:449 +#: ../../fs.pm_.c:458 #, c-format msgid "I don't know how to format %s in type %s" msgstr "" -#: ../../fs.pm_.c:511 +#: ../../fs.pm_.c:520 msgid "mount failed" msgstr "" -#: ../../fs.pm_.c:529 +#: ../../fs.pm_.c:538 #, c-format msgid "fsck failed with exit code %d or signal %d" msgstr "" -#: ../../fs.pm_.c:537 +#: ../../fs.pm_.c:548 ../../partition_table.pm_.c:551 msgid "mount failed: " msgstr "" -#: ../../fs.pm_.c:552 +#: ../../fs.pm_.c:563 ../../partition_table.pm_.c:547 #, c-format msgid "error unmounting %s: %s" msgstr "" @@ -1790,672 +1794,194 @@ msgstr "" msgid "You don't have any partitions!" msgstr "" -#: ../../help.pm_.c:9 +#: ../../help.pm_.c:7 msgid "" -"Please choose your preferred language for installation and system usage." -msgstr "" - -#: ../../help.pm_.c:12 -msgid "" -"You need to accept the terms of the above license to continue installation.\n" -"\n" -"\n" -"Please click on \"Accept\" if you agree with its terms.\n" -"\n" -"\n" -"Please click on \"Refuse\" if you disagree with its terms. Installation will " -"end without modifying your current\n" -"configuration." -msgstr "" - -#: ../../help.pm_.c:22 -msgid "Choose the layout corresponding to your keyboard from the list above" -msgstr "" - -#: ../../help.pm_.c:25 -msgid "" -"If you wish other languages (than the one you choose at\n" -"beginning of installation) will be available after installation, please " -"chose\n" -"them in list above. If you want select all, you just need to select \"All\"." -msgstr "" - -#: ../../help.pm_.c:30 -msgid "" -"Please choose \"Install\" if there are no previous version of Mandrake " -"Linux\n" -"installed or if you wish to use several operating systems.\n" -"\n" -"\n" -"Please choose \"Update\" if you wish to update an already installed version " -"of Mandrake Linux.\n" -"\n" -"\n" -"Depend of your knowledge in GNU/Linux, you can choose one of the following " -"levels to install or update your\n" -"Mandrake Linux operating system:\n" -"\n" -"\t* Recommended: if you have never installed a GNU/Linux operating system " -"choose this. Installation will be\n" -"\t be very easy and you will be asked only on few questions.\n" -"\n" -"\n" -"\t* Customized: if you are familiar enough with GNU/Linux, you may choose " -"the primary usage (workstation, server,\n" -"\t development) of your system. You will need to answer to more questions " -"than in \"Recommended\" installation\n" -"\t class, so you need to know how GNU/Linux works to choose this " -"installation class.\n" -"\n" -"\n" -"\t* Expert: if you have a good knowledge in GNU/Linux, you can choose this " -"installation class. As in \"Customized\"\n" -"\t installation class, you will be able to choose the primary usage " -"(workstation, server, development). Be very\n" -"\t careful before choose this installation class. You will be able to " -"perform a higly customized installation.\n" -"\t Answer to some questions can be very difficult if you haven't a good " -"knowledge in GNU/Linux. So, don't choose\n" -"\t this installation class unless you know what you are doing." -msgstr "" - -#: ../../help.pm_.c:56 -msgid "" -"Select:\n" -"\n" -" - Customized: If you are familiar enough with GNU/Linux, you may then " -"choose\n" -" the primary usage for your machine. See below for details.\n" -"\n" -"\n" -" - Expert: This supposes that you are fluent with GNU/Linux and want to\n" -" perform a highly customized installation. As for a \"Customized\"\n" -" installation class, you will be able to select the usage for your " -"system.\n" -" But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE " -"DOING!" -msgstr "" - -#: ../../help.pm_.c:68 -msgid "" -"You must now define your machine usage. Choices are:\n" -"\n" -"\t* Workstation: this the ideal choice if you intend to use your machine " -"primarily for everyday use, at office or\n" -"\t at home.\n" -"\n" -"\n" -"\t* Development: if you intend to use your machine primarily for software " -"development, it is the good choice. You\n" -"\t will then have a complete collection of software installed in order to " -"compile, debug and format source code,\n" -"\t or create software packages.\n" -"\n" -"\n" -"\t* Server: if you intend to use this machine as a server, it is the good " -"choice. Either a file server (NFS or\n" -"\t SMB), a print server (Unix style or Microsoft Windows style), an " -"authentication server (NIS), a database\n" -"\t server and so on. As such, do not expect any gimmicks (KDE, GNOME, etc.) " -"to be installed." -msgstr "" - -#: ../../help.pm_.c:84 -msgid "" -"DrakX will attempt to look for PCI SCSI adapter(s). If DrakX\n" -"finds an SCSI adapter and knows which driver to use, it will be " -"automatically\n" -"installed.\n" -"\n" -"\n" -"If you have no SCSI adapter, an ISA SCSI adapter or a PCI SCSI adapter that\n" -"DrakX doesn't recognize, you will be asked if a SCSI adapter is present in " -"your\n" -"system. If there is no adapter present, you can click on \"No\". If you " -"click on\n" -"\"Yes\", a list of drivers will be presented from which you can select your\n" -"specific adapter.\n" -"\n" -"\n" -"If you have to manually specify your adapter, DrakX will ask if you want to\n" -"specify options for it. You should allow DrakX to probe the hardware for " +"Before going further, you should read carefully the terms of the license. " +"It\n" +"covers the whole Mandrake Linux distribution, and if you do not agree with " +"all\n" +"the terms in it, click on the Refuse button. That'll immediately terminate " "the\n" -"options. This usually works well.\n" -"\n" -"\n" -"If not, you will need to provide options to the driver. Please review the " -"User\n" -"Guide (chapter 3, section \"Collective informations on your hardware\") for " -"hints\n" -"on retrieving this information from hardware documentation, from the\n" -"manufacturer's Web site (if you have Internet access) or from Microsoft " -"Windows\n" -"(if you have it on your system)." -msgstr "" - -#: ../../help.pm_.c:108 -msgid "" -"At this point, you need to choose where to install your\n" -"Mandrake Linux operating system on your hard drive. If it is empty or if an\n" -"existing operating system uses all the space available on it, you need to\n" -"partition it. Basically, partitioning a hard drive consists of logically\n" -"dividing it to create space to install your new Mandrake Linux system.\n" -"\n" -"\n" -"Because the effects of the partitioning process are usually irreversible,\n" -"partitioning can be intimidating and stressful if you are an inexperienced " -"user.\n" -"This wizard simplifies this process. Before beginning, please consult the " -"manual\n" -"and take your time.\n" -"\n" -"\n" -"You need at least two partitions. One is for the operating system itself and " -"the\n" -"other is for the virtual memory (also called Swap).\n" -"\n" -"\n" -"If partitions have been already defined (from a previous installation or " -"from\n" -"another partitioning tool), you just need choose those to use to install " -"your\n" -"Linux system.\n" -"\n" -"\n" -"If partitions haven't been already defined, you need to create them. \n" -"To do that, use the wizard available above. Depending of your hard drive\n" -"configuration, several solutions can be available:\n" -"\n" -"\t* Use existing partition: the wizard has detected one or more existing " -"Linux partitions on your hard drive. If\n" -"\t you want to keep them, choose this option. \n" -"\n" -"\n" -"\t* Erase entire disk: if you want delete all data and all partitions " -"present on your hard drive and replace them by\n" -"\t your new Mandrake Linux system, you can choose this option. Be careful " -"with this solution, you will not be\n" -"\t able to revert your choice after confirmation.\n" -"\n" -"\n" -"\t* Use the free space on the Windows partition: if Microsoft Windows is " -"installed on your hard drive and takes\n" -"\t all space available on it, you have to create free space for Linux data. " -"To do that you can delete your\n" -"\t Microsoft Windows partition and data (see \"Erase entire disk\" or " -"\"Expert mode\" solutions) or resize your\n" -"\t Microsoft Windows partition. Resizing can be performed without loss of " -"any data. This solution is\n" -"\t recommended if you want use both Mandrake Linux and Microsoft Windows on " -"same computer.\n" -"\n" -"\n" -"\t Before choosing this solution, please understand that the size of your " -"Microsoft\n" -"\t Windows partition will be smaller than at present time. It means that " -"you will have less free space under\n" -"\t Microsoft Windows to store your data or install new software.\n" -"\n" -"\n" -"\t* Expert mode: if you want to partition manually your hard drive, you can " -"choose this option. Be careful before\n" -"\t choosing this solution. It is powerful but it is very dangerous. You can " -"lose all your data very easily. So,\n" -"\t don't choose this solution unless you know what you are doing." -msgstr "" - -#: ../../help.pm_.c:160 -msgid "" -"At this point, you need to choose what\n" -"partition(s) to use to install your new Mandrake Linux system. If " -"partitions\n" -"have been already defined (from a previous installation of GNU/Linux or " -"from\n" -"another partitioning tool), you can use existing partitions. In other " -"cases,\n" -"hard drive partitions must be defined.\n" -"\n" +"installation. To follow on with the installation, click the Accept button." +msgstr "" + +#: ../../help.pm_.c:13 +msgid "" +"GNU/Linux is a multiuser system, and this means that each user can have his " +"own\n" +"preferences, his own files and so on. You can read the User Guide to learn " +"more.\n" +"But unlike Root, which is the administrator, the users which you will add " +"here\n" +"will not be entitled to change anything except their own files and their " +"own\n" +"configuration. You will have to create at least one regular user for " +"yourself.\n" +"That account is where you should log in for routine use. Although it is " +"very\n" +"practical to log in as Root everyday, it may also be very dangerous! The\n" +"slightest mistake could mean that your system would not work any more. If " +"you\n" +"make a serious mistake as a regular user, you may only lose some " +"information,\n" +"but not the entire system.\n" "\n" -"To create partitions, you must first select a hard drive. You can select " +"First you have to enter your real name. This is not mandatory, of course as " +"you\n" +"can actually enter whatever you want. drakX will then take the first word " +"you\n" +"have entered in the box and will bring it over to the User name. This is " "the\n" -"disk for partitioning by clicking on \"hda\" for the first IDE drive, \"hdb" -"\" for\n" -"the second or \"sda\" for the first SCSI drive and so on.\n" -"\n" -"\n" -"To partition the selected hard drive, you can use these options:\n" -"\n" -" * Clear all: this option deletes all partitions available on the selected " -"hard drive.\n" -"\n" -"\n" -" * Auto allocate: this option allows you to automatically create Ext2 and " -"swap partitions in free space of your\n" -" hard drive.\n" -"\n" -"\n" -" * Rescue partition table: if your partition table is damaged, you can try " -"to recover it using this option. Please\n" -" be careful and remember that it can fail.\n" -"\n" -"\n" -" * Undo: you can use this option to cancel your changes.\n" -"\n" -"\n" -" * Reload: you can use this option if you wish to undo all changes and " -"load your initial partitions table\n" -"\n" -"\n" -" * Wizard: If you wish to use a wizard to partition your hard drive, you " -"can use this option. It is recommended if\n" -" you do not have a good knowledge in partitioning.\n" -"\n" -"\n" -" * Restore from floppy: if you have saved your partition table on a floppy " -"during a previous installation, you can\n" -" recover it using this option.\n" -"\n" -"\n" -" * Save on floppy: if you wish to save your partition table on a floppy to " -"be able to recover it, you can use this\n" -" option. It is strongly recommended to use this option\n" -"\n" -"\n" -" * Done: when you have finished partitioning your hard drive, use this " -"option to save your changes.\n" -"\n" -"\n" -"For information, you can reach any option using the keyboard: navigate " -"trough the partitions using Tab and Up/Down arrows.\n" -"\n" -"\n" -"When a partition is selected, you can use:\n" -"\n" -" * Ctrl-c to create a new partition (when a empty partition is " -"selected)\n" -"\n" -" * Ctrl-d to delete a partition\n" -"\n" -" * Ctrl-m to set the mount point\n" -" \n" +"name that this particular user will use to log into the system. You can " +"change\n" +"it. You then have to enter a password here. A non-privileged (regular) " +"user's\n" +"password is not as crucial as that of Root from a security point of view, " +"but\n" +"that is no reason to neglect it after all, they are your files at risk.\n" +"\n" +"If you click on Accept user, you can then add as many as you want. Add a " +"user\n" +"for each of your friends: your father or your sister, for example. When you " +"have\n" +"added all the users you want, select Done.\n" "\n" -" \n" -"If you are installing on a PPC Machine, you will want to create a small HFS " -"'bootstrap' partition of at least 1MB for use\n" -"by the yaboot bootloader. If you opt to make the partition a bit larger, say " -"50MB, you may find it a useful place to store \n" -"a spare kernel and ramdisk image for emergency boot situations." +"Clicking the Advanced button allows you to change the default Shell for " +"that\n" +"user (bash by default)." msgstr "" -#: ../../help.pm_.c:224 +#: ../../help.pm_.c:40 msgid "" -"Above are listed the existing Linux partitions detected on\n" -"your hard drive. You can keep choices make by the wizard, they are good for " -"a\n" -"common usage. If you change these choices, you must at least define a root\n" -"partition (\"/\"). Don't choose a too little partition or you will not be " -"able\n" -"to install enough software. If you want store your data on a separate " -"partition,\n" -"you need also to choose a \"/home\" (only possible if you have more than " -"one\n" -"Linux partition available).\n" -"\n" -"\n" -"For information, each partition is listed as follows: \"Name\", \"Capacity" -"\".\n" -"\n" -"\n" -"\"Name\" is coded as follow: \"hard drive type\", \"hard drive number\",\n" -"\"partition number\" (for example, \"hda1\").\n" -"\n" -"\n" -"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and " -"\"sd\"\n" -"if it is an SCSI hard drive.\n" +"It is now time to specify which programs you wish to install on your " +"system.\n" +"There are thousands of packages available for Mandrake Linux, and you are " +"not\n" +"supposed to know them all by heart.\n" "\n" +"If you are performing a standard installation from CDROM you will first be " +"asked\n" +"to specify the CDs you currently have. Check the boxes corresponding to the " +"CDs\n" +"you've got around and click OK.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE " -"hard drives:\n" +"Packages are sorted in groups corresponding to a particular use of your " +"machine.\n" +"The groups themselves are sorted in four sections:\n" "\n" -" * \"a\" means \"master hard drive on the primary IDE controller\",\n" +" * Workstation: If your machine will be used as a workstation, select one or " +"more\n" +"of the corresponding groups.\n" "\n" -" * \"b\" means \"slave hard drive on the primary IDE controller\",\n" +" * Graphical Environment: Select here your preferred graphical environment.\n" +"Select one at least if you want to have a graphical workstation!\n" "\n" -" * \"c\" means \"master hard drive on the secondary IDE controller\",\n" +" * Development: if the machine will be used for programming choose the " +"desired\n" +"group(s).\n" "\n" -" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" +" * Server: Finally, if the machine is intended to be a server, you are able " +"here\n" +"to select the most common services that you wish to see installed on the\n" +"machine.\n" "\n" +"Moving the mouse cursor over a group name will display a short explanatory " +"text\n" +"about this group.\n" "\n" -"With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means " -"\"secondary hard drive\", etc..." -msgstr "" - -#: ../../help.pm_.c:258 -msgid "" -"Choose the hard drive you want to erase to install your\n" -"new Mandrake Linux partition. Be careful, all data present on it will be " -"lost\n" -"and will not be recoverable." -msgstr "" - -#: ../../help.pm_.c:263 -msgid "" -"Click on \"OK\" if you want to delete all data and\n" -"partitions present on this hard drive. Be careful, after clicking on \"OK\", " +"Clicking the Advanced button, will allow you to select the Individual " +"package\n" +"selection option. This is useful if you know well the packages offered or if " "you\n" -"will not be able to recover any data and partitions present on this hard " -"drive,\n" -"including any Windows data.\n" -"\n" -"\n" -"Click on \"Cancel\" to cancel this operation without losing any data and\n" -"partitions present on this hard drive." -msgstr "" - -#: ../../help.pm_.c:273 -msgid "" -"More than one Microsoft Windows partition have been\n" -"detected on your hard drive. Please choose the one you want resize to " -"install\n" -"your new Mandrake Linux operating system.\n" -"\n" -"\n" -"For information, each partition is listed as follow; \"Linux name\", " -"\"Windows\n" -"name\" \"Capacity\".\n" -"\n" -"\"Linux name\" is coded as follow: \"hard drive type\", \"hard drive number" -"\",\n" -"\"partition number\" (for example, \"hda1\").\n" -"\n" -"\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and \"sd" -"\"\n" -"if it is an SCSI hard drive.\n" -"\n" -"\n" -"\"Hard drive number\" is always a letter putted after \"hd\" or \"sd\". With " -"IDE hard drives:\n" -"\n" -" * \"a\" means \"master hard drive on the primary IDE controller\",\n" -"\n" -" * \"b\" means \"slave hard drive on the primary IDE controller\",\n" -"\n" -" * \"c\" means \"master hard drive on the secondary IDE controller\",\n" -"\n" -" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" -"\n" -"With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means " -"\"secondary hard drive\", etc.\n" +"want to have total control on what will be installed.\n" "\n" +"If you have started the installation in ``Update'' mode, you can unselect " +"all\n" +"groups to avoid installing any new package and just repair or update the\n" +"existing system.\n" "\n" -"\"Windows name\" is the letter of your hard drive under Windows (the first " -"disk\n" -"or partition is called \"C:\")." -msgstr "" - -#: ../../help.pm_.c:306 -msgid "Please be patient. This operation can take several minutes." -msgstr "" - -#: ../../help.pm_.c:309 -msgid "" -"Any partitions that have been newly defined must be\n" -"formatted for use (formatting meaning creating a filesystem).\n" -"\n" -"\n" -"At this time, you may wish to reformat some already existing partitions to " -"erase\n" -"the data they contain. If you wish do that, please also select the " -"partitions\n" -"you want to format.\n" -"\n" -"\n" -"Please note that it is not necessary to reformat all pre-existing " -"partitions.\n" -"You must reformat the partitions containing the operating system (such as \"/" -"\",\n" -"\"/usr\" or \"/var\") but do you no have to reformat partitions containing " -"data\n" -"that you wish to keep (typically /home).\n" -"\n" -"\n" -"Please be careful selecting partitions, after formatting, all data will be\n" -"deleted and you will not be able to recover any of them.\n" -"\n" -"\n" -"Click on \"OK\" when you are ready to format partitions.\n" +"Finally, depending whether you choose to select individual packages or not, " +"you\n" +"will be presented a tree containing all packages classified by groups and\n" +"subgroups. While browsing the tree, you can select entire groups, subgroups, " +"or\n" +"simply packages.\n" "\n" +"Whenever you select a package on the tree, a description appears on the " +"right.\n" +"When you have finished with your selections, click the Install button. The\n" +"installation itself then begins. If you have chosen to install a lot of\n" +"packages, you can go and have a cup of coffee.\n" "\n" -"Click on \"Cancel\" if you want to choose other partitions to install your " -"new\n" -"Mandrake Linux operating system." +"!! If it happens that a server package has been selected either " +"intentionnally\n" +"or because it was part of a whole group; you will be asked to confirm that " +"you\n" +"really want those servers to be installed. Under Mandrake Linux, installed\n" +"servers are started by default at boot time. Even if they are safe at the " +"time\n" +"the distribution was shipped, it may happen that security holes be " +"discovered\n" +"afterwards. In particular if you don't know what all that is about, simply " +"click\n" +"No here. Clickin Yes will install the listed services and they will be " +"available\n" +"by default. !!\n" +"\n" +"The Automatic dependencies option simply disable the warning dialog which\n" +"appears whenever the installer automatically selects a package because it is " +"a\n" +"dependency of another package you just selected." msgstr "" -#: ../../help.pm_.c:335 +#: ../../help.pm_.c:99 msgid "" -"You may now select the group of packages you wish to\n" -"install or upgrade.\n" -"\n" -"\n" -"DrakX will then check whether you have enough room to install them all. If " -"not,\n" -"it will warn you about it. If you want to go on anyway, it will proceed onto " +"If you wish to connect your computer to the Internet or to a local network\n" +"please choose the correct option. Please turn on your device before choosing " "the\n" -"installation of all selected groups but will drop some packages of lesser\n" -"interest. At the bottom of the list you can select the option \n" -"\"Individual package selection\"; in this case you will have to browse " -"through\n" -"more than 1000 packages..." -msgstr "" - -#: ../../help.pm_.c:347 -msgid "" -"You can now choose individually all the packages you\n" -"wish to install.\n" -"\n" -"\n" -"You can expand or collapse the tree by clicking on options in the left " -"corner of\n" -"the packages window.\n" -"\n" -"\n" -"If you prefer to see packages sorted in alphabetic order, click on the icon\n" -"\"Toggle flat and group sorted\".\n" -"\n" -"\n" -"If you want not to be warned on dependencies, click on \"Automatic\n" -"dependencies\". If you do this, note that unselecting one package may " -"silently\n" -"unselect several other packages which depend on it." -msgstr "" - -#: ../../help.pm_.c:364 -msgid "" -"If you have all the CDs in the list above, click Ok. If you have\n" -"none of those CDs, click Cancel. If only some CDs are missing, unselect " -"them,\n" -"then click Ok." -msgstr "" - -#: ../../help.pm_.c:369 -msgid "" -"Your new Mandrake Linux operating system is currently being\n" -"installed. This operation should take a few minutes (it depends on size you\n" -"choose to install and the speed of your computer).\n" -"\n" -"\n" -"Please be patient." -msgstr "" - -#: ../../help.pm_.c:377 -msgid "" -"You can now test your mouse. Use buttons and wheel to verify\n" -"if settings are good. If not, you can click on \"Cancel\" to choose another\n" -"driver.\n" -"\n" -"\n" -"If you are installing on an Apple machine with a 1-button mouse, you will\n" -"be given the opportunity to define some keyboard keys to emulate the 2nd\n" -"and 3rd mouse buttons. This will allow you to be able to access the full\n" -"functionality of the mouse in both the Linux console and the X Window GUI.\n" +"correct option to let DrakX detect it automaticall.\n" "\n" +"Mandrake Linux offers you to configure your Internet connection at install " +"time.\n" +"Available connections are: traditional modem, ISDN modem, ADSL connection, " +"cable\n" +"modem, and finally a simple LAN connection (Ethernet).\n" "\n" -"If you have an ADB mouse, please select USB, as the Linux kernel will take\n" -"care of mapping your mouse hardware correctly." -msgstr "" - -#: ../../help.pm_.c:392 -msgid "" -"Please select the correct port. For example, the COM1\n" -"port under MS Windows is named ttyS0 under GNU/Linux." -msgstr "" - -#: ../../help.pm_.c:396 -msgid "" -"If you wish to connect your computer to the Internet or\n" -"to a local network please choose the correct option. Please turn on your " -"device\n" -"before choosing the correct option to let DrakX detect it automatically.\n" +"We won't enter here into the details of each configuration. Simply make " +"sure\n" +"that you have all the parameters from your Internet Service Provider or " +"system\n" +"administrator.\n" "\n" +"You can consult the chapter of the manual about Internet connection for " +"details\n" +"about the configuration, or simply wait until your system is installed and " +"use\n" +"the program described there to configure your connection.\n" "\n" "If you do not have any connection to the Internet or a local network, " "choose\n" "\"Disable networking\".\n" "\n" -"\n" "If you wish to configure the network later after installation or if you " "have\n" "finished to configure your network connection, choose \"Done\"." msgstr "" -#: ../../help.pm_.c:409 -msgid "" -"No modem has been detected. Please select the serial port on which it is " -"plugged.\n" -"\n" -"\n" -"For information, the first serial port (called \"COM1\" under Microsoft\n" -"Windows) is called \"ttyS0\" under Linux." -msgstr "" - -#: ../../help.pm_.c:416 -msgid "" -"You may now enter dialup options. If you don't know\n" -"or are not sure what to enter, the correct informations can be obtained " -"from\n" -"your Internet Service Provider. If you do not enter the DNS (name server)\n" -"information here, this information will be obtained from your Internet " -"Service\n" -"Provider at connection time." -msgstr "" - -#: ../../help.pm_.c:423 -msgid "" -"If your modem is an external modem, please turn on it now to let DrakX " -"detect it automatically." -msgstr "" - -#: ../../help.pm_.c:426 -msgid "Please turn on your modem and choose the correct one." -msgstr "" - -#: ../../help.pm_.c:429 -msgid "" -"If you are not sure if informations above are\n" -"correct or if you don't know or are not sure what to enter, the correct\n" -"informations can be obtained from your Internet Service Provider. If you do " -"not\n" -"enter the DNS (name server) information here, this information will be " -"obtained\n" -"from your Internet Service Provider at connection time." -msgstr "" - -#: ../../help.pm_.c:436 -msgid "" -"You may now enter your host name if needed. If you\n" -"don't know or are not sure what to enter, the correct informations can be\n" -"obtained from your Internet Service Provider." -msgstr "" - -#: ../../help.pm_.c:441 -msgid "" -"You may now configure your network device.\n" -"\n" -" * IP address: if you don't know or are not sure what to enter, ask your " -"network administrator.\n" -" You should not enter an IP address if you select the option \"Automatic " -"IP\" below.\n" -"\n" -" * Netmask: \"255.255.255.0\" is generally a good choice. If you don't " -"know or are not sure what to enter,\n" -" ask your network administrator.\n" -"\n" -" * Automatic IP: if your network uses BOOTP or DHCP protocol, select this " -"option. If selected, no value is needed in\n" -" \"IP address\". If you don't know or are not sure if you need to select " -"this option, ask your network administrator." -msgstr "" - -#: ../../help.pm_.c:453 -msgid "" -"You may now enter your host name if needed. If you\n" -"don't know or are not sure what to enter, ask your network administrator." -msgstr "" - -#: ../../help.pm_.c:457 -msgid "" -"You may now enter your host name if needed. If you\n" -"don't know or are not sure what to enter, leave blank." -msgstr "" - -#: ../../help.pm_.c:461 -msgid "" -"You may now enter dialup options. If you're not sure what to enter, the\n" -"correct information can be obtained from your ISP." -msgstr "" - -#: ../../help.pm_.c:465 -msgid "" -"If you will use proxies, please configure them now. If you don't know if\n" -"you should use proxies, ask your network administrator or your ISP." -msgstr "" - -#: ../../help.pm_.c:469 -msgid "" -"You can install cryptographic package if your internet connection has been\n" -"set up correctly. First choose a mirror where you wish to download packages " -"and\n" -"after that select the packages to install.\n" -"\n" -"\n" -"Note you have to select mirror and cryptographic packages according\n" -"to your legislation." -msgstr "" - -#: ../../help.pm_.c:478 -msgid "You can now select your timezone according to where you live." -msgstr "" - -#: ../../help.pm_.c:481 -msgid "" -"GNU/Linux manages time in GMT (Greenwich Manage\n" -"Time) and translates it in local time according to the time zone you have\n" -"selected.\n" -"\n" -"\n" -"If you use Microsoft Windows on this computer, choose \"No\"." -msgstr "" - -#: ../../help.pm_.c:489 +#: ../../help.pm_.c:122 msgid "" "You may now choose which services you want to start at boot time.\n" "\n" +"Here are presented all the services available with the current " +"installation.\n" +"Review them carefully and uncheck those that are not always needed at boot " +"time.\n" "\n" -"When your mouse comes over an item, a small balloon help will popup which\n" -"describes the role of the service.\n" -"\n" +"You can get a short explanatory text on a service by placing the mouse " +"cursor on\n" +"the service name. If you are not sure whether a service is useful or not, it " +"is\n" +"safer to leave the default behavior though.\n" "\n" "Be very careful in this step if you intend to use your machine as a server: " "you\n" @@ -2465,468 +1991,571 @@ msgid "" "In general, select only the services that you really need." msgstr "" -#: ../../help.pm_.c:502 -msgid "" -"You can configure a local printer (connected to your computer) or remote\n" -"printer (accessible via a Unix, Netware or Microsoft Windows network)." -msgstr "" - -#: ../../help.pm_.c:506 -msgid "" -"If you wish to be able to print, please choose one printing system between\n" -"CUPS and LPR.\n" -"\n" -"\n" -"CUPS is a new, powerful and flexible printing system for Unix systems (CUPS\n" -"means \"Common Unix Printing System\"). It is the default printing system " -"in\n" -"Mandrake Linux.\n" -"\n" -"\n" -"LPR is the old printing system used in previous Mandrake Linux " -"distributions.\n" -"\n" -"\n" -"If you don't have printer, click on \"None\"." -msgstr "" - -#: ../../help.pm_.c:521 -msgid "" -"GNU/Linux can deal with many types of printer. Each of these types requires\n" -"a different setup.\n" -"\n" -"\n" -"If your printer is physically connected to your computer, select \"Local\n" -"printer\".\n" -"\n" -"\n" -"If you want to access a printer located on a remote Unix machine, select\n" -"\"Remote printer\".\n" -"\n" -"\n" -"If you want to access a printer located on a remote Microsoft Windows " -"machine\n" -"(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"." -msgstr "" - -#: ../../help.pm_.c:537 -msgid "" -"Please turn on your printer before continuing to let DrakX detect it.\n" -"\n" -"You have to enter some informations here.\n" -"\n" -"\n" -" * Name of printer: the print spooler uses \"lp\" as default printer name. " -"So, you must have a printer named \"lp\".\n" -" If you have only one printer, you can use several names for it. You " -"just need to separate them by a pipe\n" -" character (a \"|\"). So, if you prefer a more meaningful name, you have " -"to put it first, eg: \"My printer|lp\".\n" -" The printer having \"lp\" in its name(s) will be the default printer.\n" -"\n" -"\n" -" * Description: this is optional but can be useful if several printers are " -"connected to your computer or if you allow\n" -" other computers to access to this printer.\n" -"\n" -"\n" -" * Location: if you want to put some information on your\n" -" printer location, put it here (you are free to write what\n" -" you want, for example \"2nd floor\").\n" -msgstr "" - -#: ../../help.pm_.c:558 -msgid "" -"You need to enter some informations here.\n" -"\n" -"\n" -" * Name of queue: the print spooler uses \"lp\" as default printer name. " -"So, you need have a printer named \"lp\".\n" -" If you have only one printer, you can use several names for it. You just " -"need to separate them by a pipe\n" -" character (a \"|\"). So, if you prefer to have a more meaningful name, " -"you have to put it first, eg: \"My printer|lp\".\n" -" The printer having \"lp\" in its name(s) will be the default printer.\n" -"\n" -" \n" -" * Spool directory: it is in this directory that printing jobs are stored. " -"Keep the default choice\n" -" if you don't know what to use\n" -"\n" -"\n" -" * Printer Connection: If your printer is physically connected to your " -"computer, select \"Local printer\".\n" -" If you want to access a printer located on a remote Unix machine, " -"select \"Remote lpd printer\".\n" -"\n" -"\n" -" If you want to access a printer located on a remote Microsoft Windows " -"machine (or on Unix machine using SMB\n" -" protocol), select \"SMB/Windows 95/98/NT\".\n" -"\n" -"\n" -" If you want to acces a printer located on NetWare network, select " -"\"NetWare\".\n" -msgstr "" - -#: ../../help.pm_.c:583 +#: ../../help.pm_.c:137 msgid "" -"Your printer has not been detected. Please enter the name of the device on\n" -"which it is connected.\n" +"X (for X Window System) is the heart of the GNU/Linux graphical interface " +"on\n" +"which all the graphics environments (KDE, Gnome, AfterStep, WindowMaker...)\n" +"bundled with Mandrake Linux rely. In this section, drakX will try to " +"configure X\n" +"automatically.\n" "\n" -"\n" -"For information, most printers are connected on the first parallel port. " -"This\n" -"one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft " -"Windows." -msgstr "" - -#: ../../help.pm_.c:591 -msgid "You must now select your printer in the above list." -msgstr "" - -#: ../../help.pm_.c:594 -msgid "" -"Please select the right options according to your printer.\n" -"Please see its documentation if you don't know what choose here.\n" -"\n" -"\n" -"You will be able to test your configuration in next step and you will be " -"able to modify it if it doesn't work as you want." +"It is extremely rare for it to fail. The only reason for it doing so is if " +"the\n" +"hardware is very old (or very new). If it succeeds, it will start X\n" +"automatically with the best resolution possible depending on the size of " +"the\n" +"monitor. A window will then appear and ask you if you can see it.\n" +"\n" +"If you are doing an Expert install, you will enter the X configuration " +"wizard.\n" +"See the corresponding section of the manual for more information about this\n" +"wizard.\n" +"\n" +"If you can see the message and answer Yes, then drakX will proceed to next " +"step.\n" +"If you cannot see the message, it simply means that the configuration was " +"wrong\n" +"and the test will automatically end after 10 seconds, restoring the screen.\n" +"\n" +"It can happen that the first try isn't the best display (screen is too " +"small,\n" +"shifted left or right...). This is why, even if X starts up correctly, " +"drakX\n" +"will then ask you if the configuration suits you and will propose to change " +"it\n" +"by displaying a list of valid modes it could find, asking you to select " +"one.\n" +"\n" +"As a last resort, if you still cannot get X to work, choose Change graphics\n" +"card, select Unlisted card, and when prompted on which server you want, " +"choose\n" +"FBDev. This is a failsafe option which works with any modern graphics card. " +"Then\n" +"choose Test again to be sure.\n" +"\n" +"Finally, you will be asked on whether you want to see the graphical " +"interface at\n" +"boot. Note that you will be asked this even if you chose not to test the\n" +"configuration. Obviously, you want to answer No if your machine will act as " +"a\n" +"server or if you were not successful in getting the display configured." msgstr "" -#: ../../help.pm_.c:601 +#: ../../help.pm_.c:171 msgid "" -"You can now enter the root password for your Mandrake Linux system.\n" -"The password must be entered twice to verify that both password entries are " -"identical.\n" -"\n" -"\n" -"Root is the system's administrator and is the only user allowed to modify " +"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n" +"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at " "the\n" -"system configuration. Therefore, choose this password carefully. \n" -"Unauthorized use of the root account can be extemely dangerous to the " -"integrity\n" -"of the system, its data and other system connected to it.\n" -"\n" -"\n" -"The password should be a mixture of alphanumeric characters and at least 8\n" -"characters long. It should never be written down.\n" -"\n" -"\n" -"Do not make the password too long or complicated, though: you must be able " -"to\n" -"remember it without too much effort." +"prompt. But in case your computer cannot boot from the CDROM, you should " +"come\n" +"back to this step for help in at least two situations:\n" +"\n" +" * when installing the boot loader, drakX will rewrite the boot sector (MBR) " +"of\n" +"your main disk (unless you are using another boot manager) so that you can " +"start\n" +"up with either Windows or GNU/Linux (assuming you have Windows in your " +"system).\n" +"If you need to reinstall Windows, the Microsoft install process will rewrite " +"the\n" +"boot sector, and then you will not be able to start GNU/Linux!\n" +"\n" +" * if a problem arises and you cannot start up GNU/Linux from the hard disk, " +"this\n" +"floppy disk will be the only means of starting up GNU/Linux. It contains a " +"fair\n" +"number of system tools for restoring a system which has crashed due to a " +"power\n" +"failure, an unfortunate typing error, a typo in a password, or any other " +"reason.\n" +"\n" +"When you click on this step, you will be asked to enter a disk inside the " +"drive.\n" +"The floppy disk that you will insert must be empty or must only contain " +"data\n" +"which you do not need. You will not have to format it; drakX will rewrite " +"the\n" +"whole disk." msgstr "" -#: ../../help.pm_.c:619 +#: ../../help.pm_.c:193 msgid "" -"If your network uses LDAP (or NIS) protocol for authentication, select\n" -"\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your " -"network\n" -"administrator.\n" -"\n" -"If your computer is not connected to any administrated network, you may want " +"At this point, you need to choose where to install your Mandrake Linux " +"operating\n" +"system on your hard drive. If it is empty or if an existing operating " +"system\n" +"uses all the space available on it, you need to partition it. Basically,\n" +"partitioning a hard drive consists of logically dividing it to create space " "to\n" -"choose \"Local files\" for authentication." -msgstr "" - -#: ../../help.pm_.c:627 -msgid "" -"You may now create one or more \"regular\" user account(s), as\n" -"opposed to the \"privileged\" user account, root. You can create\n" -"one or more account(s) for each person you want to allow to use\n" -"the computer. Note that each user account will have its own\n" -"preferences (graphical environment, program settings, etc.)\n" -"and its own \"home directory\", in which these preferences are\n" -"stored.\n" -"\n" -"\n" -"First of all, create an account for yourself! Even if you will be the only " -"user\n" -"of the machine, you may NOT connect as root for daily use of the system: " -"it's a\n" -"very high security risk. Making the system unusable is very often a typo " -"away.\n" +"install your new Mandrake Linux system.\n" "\n" +"Because the effects of the partitioning process are usually irreversible,\n" +"partitioning can be intimidating and stressful if you are an inexperienced " +"user.\n" +"Hopefully, there is a wizard which simplifies this process. Before " +"beginning,\n" +"please consult the manual and take your time.\n" "\n" -"Therefore, you should connect to the system using the user account\n" -"you will have created here, and login as root only for administration\n" -"and maintenance purposes." -msgstr "" - -#: ../../help.pm_.c:646 -msgid "" -"Creating a boot disk is strongly recommended. If you can't\n" -"boot your computer, it's the only way to rescue your system without\n" -"reinstalling it." -msgstr "" - -#: ../../help.pm_.c:651 -msgid "" -"You need to indicate where you wish\n" -"to place the information required to boot to GNU/Linux.\n" -"\n" -"\n" -"Unless you know exactly what you are doing, choose \"First sector of\n" -"drive (MBR)\"." -msgstr "" - -#: ../../help.pm_.c:659 -msgid "" -"Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n" -" (primary master IDE disk) or \"/dev/sda\" (first SCSI disk)." -msgstr "" - -#: ../../help.pm_.c:663 -msgid "" -"LILO (the LInux LOader) and Grub are bootloaders: they are able to boot\n" -"either GNU/Linux or any other operating system present on your computer.\n" -"Normally, these other operating systems are correctly detected and\n" -"installed. If this is not the case, you can add an entry by hand in this\n" -"screen. Be careful as to choose the correct parameters.\n" -"\n" -"\n" -"You may also want not to give access to these other operating systems to\n" -"anyone, in which case you can delete the corresponding entries. But\n" -"in this case, you will need a boot disk in order to boot them!" -msgstr "" - -#: ../../help.pm_.c:675 -msgid "" -"LILO and grub main options are:\n" -" - Boot device: Sets the name of the device (e.g. a hard disk\n" -"partition) that contains the boot sector. Unless you know specifically\n" -"otherwise, choose \"/dev/hda\".\n" -"\n" +"If you are running the install in Expert mode, you will enter the Mandrake " +"Linux\n" +"partitioning tool: DiskDrake;. It allows you to fine-tune your partitions. " +"See\n" +"the chapter DiskDrake of the manual; the usage is the same. You can use from " +"the\n" +"installation interface the wizards as described here by clicking the button\n" +"Wizard from the interface.\n" "\n" -" - Delay before booting default image: Specifies the number in tenths\n" -"of a second the boot loader should wait before booting the first image.\n" -"This is useful on systems that immediately boot from the hard disk after\n" -"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n" -"omitted or is set to zero.\n" +"If partitions have been already defined (from a previous installation or " +"from\n" +"another partitioning tool), you just need choose those to use to install " +"your\n" +"Linux system.\n" "\n" +"If partitions haven't been already defined, you need to create them. To do " +"that,\n" +"use the wizard available above. Depending of your hard drive configuration,\n" +"several options are available:\n" "\n" -" - Video mode: This specifies the VGA text mode that should be selected\n" -"when booting. The following values are available: \n" +" * Use free space: it will simply lead to an automatic partitioning of your " +"blank\n" +"drive(s); you won't need to worry any more about it.\n" "\n" -" * normal: select normal 80x25 text mode.\n" +" * Use existing partition: the wizard has detected one or more existing " +"Linux\n" +"partitions on your hard drive. If you want to keep them, choose this " +"option.\n" "\n" -" * : use the corresponding text mode.\n" +" * Erase entire disk: if you want delete all data and all partitions present " +"on\n" +"your hard drive and replace them by your new Mandrake Linux system, you can\n" +"choose this option. Be careful with this solution, you will not be able to\n" +"revert your choice after confirmation.\n" +"\n" +" * Use the free space on the Windows partition: if Microsoft Windows is " +"installed\n" +"on your hard drive and takes all space available on it, you have to create " +"free\n" +"space for Linux data. To do that you can delete your Microsoft Windows " +"partition\n" +"and data (see \"Erase entire disk\" or \"Expert mode\" solutions) or resize " +"your\n" +"Microsoft Windows partition. Resizing can be performed without loss of any " +"data.\n" +"This solution is recommended if you want use both Mandrake Linux and " +"Microsoft\n" +"Windows on same computer.\n" "\n" +" Before choosing this solution, please understand that the size of your " +"Microsoft\n" +"Windows partition will be smaller than at present time. It means that you " +"will\n" +"have less free space under Microsoft Windows to store your data or install " +"new\n" +"software.\n" "\n" -" - Clean \"/tmp\" at each boot: if you want delete all files and " -"directories\n" -"stored in \"/tmp\" when you boot your system, select this option.\n" +" * Remove Windows: it will simply erase everything on the drive and begin " +"fresh,\n" +"partitioning from scratch. All data on your disk will be lost.\n" "\n" +" !! If you choose this option, All data on your disk will be lost. !!\n" "\n" -" - Precise RAM if needed: unfortunately, there is no standard method to ask " -"the\n" -"BIOS about the amount of RAM present in your computer. As consequence, Linux " -"may\n" -"fail to detect your amount of RAM correctly. If this is the case, you can\n" -"specify the correct amount or RAM here. Please note that a difference of 2 " -"or 4\n" -"MB between detected memory and memory present in your system is normal." +" * Expert mode: if you want to partition manually your hard drive, you can " +"choose\n" +"this option. Be careful before choosing this solution. It is powerful but it " +"is\n" +"very dangerous. You can lose all your data very easily. So, don't choose " +"this\n" +"solution unless you know what you are doing." msgstr "" -#: ../../help.pm_.c:707 +#: ../../help.pm_.c:253 msgid "" -"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able\n" -"to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.\n" -"Normally, these other operating systems are correctly detected and\n" -"installed. If this is not the case, you can add an entry by hand in this\n" -"screen. Be careful as to choose the correct parameters.\n" +"There you are. Installation is now complete and your GNU/Linux system is " +"ready\n" +"to use. Just click OK to reboot the system. You can start GNU/Linux or " +"Windows,\n" +"whichever you prefer (if you are dual-booting), as soon as the computer has\n" +"booted up again.\n" "\n" +"The Advanced button shows two more buttons to:\n" "\n" -"Yaboot main options are:\n" +" * Generate auto install floppy: to create an install floppy disk that will\n" +"automatically perform a whole installation without the help of an operator,\n" +"similar to the installation you just configured.\n" "\n" +" Note that two different options are available after clicking the button:\n" "\n" -" - Init Message: A simple text message that is displayed before the boot\n" -"prompt.\n" +" * Replay: This is a partially automated install as the partitioning step " +"(and\n" +"only this one) remains interactive.\n" "\n" +" * Automated: Fully automated install: the hard disk is completely " +"rewritten, all\n" +"data is lost.\n" "\n" -" - Boot Device: Indicate where you want to place the information required " -"to \n" -"boot to GNU/Linux. Generally, you will have setup a bootstrap partition " -"earlier \n" -"to hold this information.\n" +" This feature is very handy when installing a great number of similar " +"machines.\n" +"See the Auto install section at our WebSite.\n" "\n" +" * Save packages selection(*): saves the packages selection as made " +"previously.\n" +"Then when doing another install, insert the floppy inside the driver and run " +"the\n" +"install going to the help screen F1, and issuing >>linux defcfg=\"floppy" +"\"<<.\n" "\n" -" - Open Firmware Delay: Unlike LILO, there are two delays available with \n" -"yaboot. The first delay is measured in seconds and at this point you can \n" -"choose between CD, OF boot, MacOS, or Linux.\n" +"(*) You need a FAT formatted floppy (To create one under GNU/Linux type\n" +"\"mformat a:\")" +msgstr "" + +#: ../../help.pm_.c:283 +msgid "" +"Any partitions that have been newly defined must be formatted for use\n" +"(formatting meaning creating a filesystem).\n" "\n" +"At this time, you may wish to reformat some already existing partitions to " +"erase\n" +"the data they contain. If you wish do that, please also select the " +"partitions\n" +"you want to format.\n" "\n" -" - Kernel Boot Timeout: This timeout is similar to the LILO boot delay. " -"After \n" -"selecting Linux, you will have this delay in 0.1 seconds before your " -"default\n" -"kernel description is selected.\n" +"Please note that it is not necessary to reformat all pre-existing " +"partitions.\n" +"You must reformat the partitions containing the operating system (such as \"/" +"\",\n" +"\"/usr\" or \"/var\") but you do not have to reformat partitions containing " +"data\n" +"that you wish to keep (typically /home).\n" "\n" +"Please be careful selecting partitions, after formatting, all data on the\n" +"selected partitions will be deleted and you will not be able to recover any " +"of\n" +"them.\n" "\n" -" - Enable CD Boot?: Checking this option will allow you to choose 'C' for " -"CD at\n" -"the first boot prompt.\n" +"Click on OK when you are ready to format partitions.\n" "\n" +"Click on Cancel if you want to choose other partitions to install your new\n" +"Mandrake Linux operating system.\n" "\n" -" - Enable OF Boot?: Checking this option will allow you to choose 'N' for " -"Open\n" -"Firmware at the first boot prompt.\n" +"Click on Advanced to select partitions on which you want to check for bad\n" +"blocks." +msgstr "" + +#: ../../help.pm_.c:308 +msgid "" +"Your new Mandrake Linux operating system is currently being installed. This\n" +"operation should take a few minutes (it depends on size you choose to " +"install\n" +"and the speed of your computer).\n" "\n" +"Please be patient." +msgstr "" + +#: ../../help.pm_.c:315 +msgid "" +"At this point, it is now time to choose the security level desired for that\n" +"machine. As a rule of thumb, the more exposed is the machine, and the more " +"the\n" +"data stored in it is crucial the higher the security level should be. " +"However a\n" +"higher security level is generally obtained at the expenses of easiness of " +"use.\n" +"Refer to the chapter MSEC of the Reference Manual; to get more information " +"about\n" +"the meaning of those levels.\n" "\n" -" - Default OS: You can select which OS will boot by default when the Open " -"Firmware \n" -"Delay expires." +"If you don't know what to choose, keep the default option." +msgstr "" + +#: ../../help.pm_.c:325 +msgid "" +"The Mandrake Linux spreads among several CDROMs. It may be that drakX has\n" +"selected packages on another CDROM than the installation CDROM, and when it\n" +"needs that you put another one into the drive, it will eject the current " +"CDROM\n" +"and ask you for another one." msgstr "" -#: ../../help.pm_.c:748 +#: ../../help.pm_.c:331 msgid "" -"You can add additional entries for yaboot, either for other operating " -"systems,\n" -"alternate kernels, or for an emergency boot image.\n" +"drakX now ask you what installation class you want. Here, you will also " +"choose\n" +"whether you want to perform an installation or an upgrade of an existing\n" +"Mandrake Linux system. Choose what suits your situation. You can perform an\n" +"installation over an existing system, wiping out the old system. You can " +"also do\n" +"an upgrade to repair an existing system.\n" +"\n" +"Please choose \"Install\" if there are no previous version of Mandrake " +"Linux\n" +"installed or if you wish to use several operating systems.\n" "\n" +"Please choose \"Update\" if you wish to update an already installed version " +"of\n" +"Mandrake Linux.\n" "\n" -"For other OS's - the entry consists only of a label and the root partition.\n" +"Depend of your knowledge in GNU/Linux, you can choose one of the following\n" +"levels to install or update your Mandrake Linux operating system:\n" "\n" +" * Recommended: if you have never installed a GNU/Linux operating system " +"choose\n" +"this. Installation will be be very easy and you will be asked only on few\n" +"questions.\n" "\n" -"For Linux, there are a few possible options: \n" +" * Customized: if you are familiar enough with GNU/Linux, you may choose " +"the\n" +"primary usage (workstation, server, development) of your system. You will " +"need\n" +"to answer to more questions than in \"Recommended\" installation class, so " +"you\n" +"need to know how GNU/Linux works to choose this installation class.\n" +"\n" +" * Expert: if you have a good knowledge in GNU/Linux, you can choose this\n" +"installation class. As in \"Customized\" installation class, you will be " +"able to\n" +"choose the primary usage (workstation, server, development). Be very " +"careful\n" +"before choose this installation class. You will be able to perform a higly\n" +"customized installation. Answer to some questions can be very difficult if " +"you\n" +"haven't a good knowledge in GNU/Linux. So, don't choose this installation " +"class\n" +"unless you know what you are doing." +msgstr "" + +#: ../../help.pm_.c:364 +msgid "" +"Normally, drakX will have selected the right keyboard for you (depending on " +"the\n" +"language you have chosen) and you won't even see this step. However, you " +"might\n" +"not have a keyboard which corresponds exactly to your language: for example, " +"if\n" +"you are an English speaking Swiss person, you may still want your keyboard " +"to be\n" +"a Swiss keyboard. Or if you speak English but are located in Québec, you may\n" +"find yourself in the same situation. In both cases, you will have to go back " +"to\n" +"this installation step and select an appropriate keyboard from the list.\n" "\n" +"All you need to do is select your preferred keyboard layout from the list " +"which\n" +"appears in front of you.\n" "\n" -" - Label: This is simply the name will type at the yaboot prompt to select " -"this \n" -"boot option.\n" +"If you have a keyboard from another language than the one used by default, " +"click\n" +"on the Advanced button. You will be presented the complete list of " +"supported\n" +"keyboards." +msgstr "" + +#: ../../help.pm_.c:380 +msgid "" +"Please choose your preferred language for installation and system usage.\n" "\n" +"There is an Advanced button allowing you to select other languages, that " +"will be\n" +"installed in the machine so that you can use them later if you need them. If " +"for\n" +"example you will host people from Spain on your machine, select English as " +"the\n" +"main language in the tree view, and under the advanced section, check the " +"box\n" +"corresponding to Spanish|Spain.\n" "\n" -" - Image: This would be the name of the kernel to boot. Typically vmlinux " -"or\n" -"a variation of vmlinux with an extension.\n" +"As soon as you have selected the language and confirmed with clicking the " +"OK\n" +"button, you will automatically go on to the next step." +msgstr "" + +#: ../../help.pm_.c:392 +msgid "" +"drakX just skips this test unless you purposely click on the corresponding " +"step\n" +"on the left. By default, drakX sees your mouse as a two-button mouse and\n" +"emulates the third button, and knows whether it's PS/2, serial or USB.\n" "\n" +"Perhaps this is not what you want. In that case, you just have to select " +"the\n" +"right type for your mouse in the list which appears.\n" "\n" -" - Root: The root device or '/' for your Linux installation.\n" +"You can now test your mouse. Use buttons and wheel to verify if settings " +"are\n" +"good. If not, you can click on \"Cancel\" to choose another driver." +msgstr "" + +#: ../../help.pm_.c:403 +msgid "" +"This is the most crucial decision point for the security of your GNU/Linux\n" +"system: you are going to have to enter the Root password. Root is the " +"system\n" +"administrator and is the only one authorized to make updates, add users, " +"change\n" +"the overall system configuration, and so on. In short, root can do " +"everything!\n" +"That is why you have to choose a password which is difficult to guess; " +"drakX\n" +"will tell you if it is too easy. As shown, you can choose not to enter a\n" +"password, but we strongly advise you to enter one, if only for one reason: " +"do\n" +"not think that because you booted GNU/Linux, your other operating systems " +"are\n" +"safe from mistakes. That's not true since Root can overcome all limitations " +"and\n" +"unintentionally erase all data on partitions by carelessly accessing the\n" +"partitions themselves!\n" "\n" +"The password should be a mixture of alphanumeric characters and at least 8\n" +"characters long. It should never be written down.\n" "\n" -" \n" -" - Append: On Apple hardware, the kernel append option is used quite often " +"Do not make the password too long or complicated, though: you must be able " "to\n" -"assist in initializing video hardware, or to enable keyboard mouse button " -"emulation\n" -"for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse. The " -"following \n" -"are some examples:\n" +"remember it without too much effort.\n" "\n" +"You will have to type the password twice a typing error in the first " +"attempt\n" +"could be a problem if you repeat it since the ``incorrect'' password is now\n" +"required when you connect up to the system.\n" "\n" -"\t\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 " -"hda=autotune\n" +"Depending on your local network configuration, you may or may not use NIS. " +"If\n" +"you don't know, ask your system administrator. If you use NIS, check the " +"option\n" +"Use NIS. When you press OK, you will then have to fill in the necessary\n" +"information." +msgstr "" + +#: ../../help.pm_.c:431 +msgid "" +"LILO and GRUB are boot loaders for GNU/Linux. This stage is normally " +"totally\n" +"automated. In fact, drakX will analyze the disk boot sector and will act\n" +"accordingly depending on what it finds here:\n" "\n" -"\t\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n" +" * if it finds a Windows boot sector, it will replace it with a GRUB/LILO " +"boot\n" +"sector so that you can start GNU/Linux or Windows;\n" "\n" +" * if it finds a GRUB or LILO boot sector, it will replace it with a new " +"one;\n" "\n" -" \n" -" - Initrd: This option can be used either to load initial modules, before " -"the boot \n" -"device is available, or to load a ramdisk image for an emergency boot " -"situation.\n" +"If in doubt, drakX will display a dialog with various options.\n" "\n" +" * Bootloader to use: you get here three choices:\n" "\n" -" - Initrd-size: The default ramdisk size is generally 4096 bytes. If you " -"should need\n" -"to allocate a large ramdisk, this option can be used.\n" +" * LILO with graphical menu: if you prefer LILO with its graphical " +"interface.\n" "\n" +" * Grub: if you prefer GRUB (text menu).\n" "\n" -" - Read-write: Normally the 'root' partition is initially brought up read-" -"only, to allow\n" -"a filesystem check before the system becomes 'live'. You can override this " -"option here.\n" +" * LILO with text menu: if you prefer LILO with its text menu interface.\n" "\n" +" * Boot device: In most cases, you will not change the default (/dev/hda), " +"but if\n" +"you prefer, the bootloader can be installed on the second hard drive (/dev/" +"hdb),\n" +"or even on a floppy disk (/dev/fd0).\n" "\n" -" - NoVideo: Should the Apple video hardware prove to be exceptionally " -"problematic, you can\n" -"select this option to boot in 'novideo' mode, with native framebuffer " -"support.\n" +" * Delay before booting default image: When rebooting the computer, this is " +"the\n" +"delay granted to the user to choose in the boot loader menu, another boot " +"entry\n" +"than the default one.\n" +"\n" +"!! Beware that if you choose not to install a bootloader (by selecting " +"Cancel\n" +"here), you must ensure that you have a way to boot your Mandrake Linux " +"system!\n" +"Also be sure about what you are doing if you change any of the options " +"here. !!\n" +"\n" +"Clicking the Advanced button in this dialog will offer many advanced " +"options\n" +"reserved to the expert user.\n" +"\n" +"Mandrake Linux installs its own bootloader, which will let you boot either\n" +"GNU/Linux or any other operating systems which you have on your system.\n" +"\n" +"If there is another operating system installed on your machine, it'll be\n" +"automatically added to the boot menu. Here you can choose to fine-tune the\n" +"existing options. Double-clicking on an existing entry allows you to change " +"its\n" +"parameters or remove it; Add creates a new entry; and Done goes onto next\n" +"installation step." +msgstr "" + +#: ../../help.pm_.c:475 +msgid "" +"drakX then goes on to detecting all hard disks present on your computer. It " +"will\n" +"also scan for one or more PCI SCSI card(s) on your system, if you have any. " +"If\n" +"such a device is found, drakX will automatically install the right driver.\n" +"\n" +"Should it fail, you are anyway asked whether you have a SCSI card or not. " +"Answer\n" +"Yes to choose your card in a list or No if you have no SCSI hardware. If you " +"are\n" +"not sure you can also check the list of hardware in your machine by " +"selecting\n" +"See hardware info and clicking OK.\n" "\n" +"If you have to manually specify your adapter, DrakX will ask if you want to\n" +"specify options for it. You should allow DrakX to probe the hardware for " +"the\n" +"options. This usually works well.\n" "\n" -" - Default: Selects this entry as being the default Linux selection, " -"selectable by just\n" -"pressing ENTER at the yaboot prompt. This entry will also be highlighted " -"with a '*', if you\n" -"press TAB to see the boot selections." +"If not, you will need to provide options to the driver. Please review the " +"User\n" +"Guide (chapter 3, section \"Collective informations on your hardware\") for\n" +"hints on retrieving this information from hardware documentation, from the\n" +"manufacturer's Web site (if you have Internet access) or from Microsoft " +"Windows\n" +"(if you have it on your system)." msgstr "" -#: ../../help.pm_.c:803 +#: ../../help.pm_.c:495 msgid "" -"SILO is a bootloader for SPARC: it is able to boot\n" -"either GNU/Linux or any other operating system present on your computer.\n" -"Normally, these other operating systems are correctly detected and\n" -"installed. If this is not the case, you can add an entry by hand in this\n" -"screen. Be careful as to choose the correct parameters.\n" +"Here are presented various parameters related to your machine. Depending on " +"your\n" +"installed hardware you may or not, see the following entries:\n" "\n" +" * Mouse: mouse Check the current mouse configuration and click on the " +"button to\n" +"change it if necessary.\n" "\n" -"You may also want not to give access to these other operating systems to\n" -"anyone, in which case you can delete the corresponding entries. But\n" -"in this case, you will need a boot disk in order to boot them!" -msgstr "" - -#: ../../help.pm_.c:815 -msgid "" -"SILO main options are:\n" -" - Bootloader installation: Indicate where you want to place the\n" -"information required to boot to GNU/Linux. Unless you know exactly\n" -"what you are doing, choose \"First sector of drive (MBR)\".\n" +" * Keyboard: keyboard Check the current keyboard map configuration and click " +"on\n" +"the button to change that if necessary.\n" "\n" +" * Timezone: timezone DrakX, by default, guesses your timezone from the " +"language\n" +"you have chosen. But here again, as for the keyboard choice, you may not be " +"in\n" +"the country which the chosen language suggests, so you may need to click on " +"the\n" +"Timezone button so that you can configure the clock according to the time " +"zone\n" +"you are in.\n" "\n" -" - Delay before booting default image: Specifies the number in tenths\n" -"of a second the boot loader should wait before booting the first image.\n" -"This is useful on systems that immediately boot from the hard disk after\n" -"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n" -"omitted or is set to zero." -msgstr "" - -#: ../../help.pm_.c:828 -msgid "" -"Now it's time to configure the X Window System, which is the\n" -"core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n" -"you must configure your video card and monitor. Most of these\n" -"steps are automated, though, therefore your work may only consist\n" -"of verifying what has been done and accept the settings :)\n" +" * Printer: Clicking on the No Printer button, will open the printer\n" +"configuration wizard..\n" "\n" +" * Sound card: If a sound card has been detected on your system, it is " +"displayed\n" +"here. No modification possible at installation time.\n" "\n" -"When the configuration is over, X will be started (unless you\n" -"ask DrakX not to) so that you can check and see if the\n" -"settings suit you. If they don't, you can come back and\n" -"change them, as many times as necessary." -msgstr "" - -#: ../../help.pm_.c:841 -msgid "" -"If something is wrong in X configuration, use these options to correctly\n" -"configure the X Window System." -msgstr "" - -#: ../../help.pm_.c:845 -msgid "" -"If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n" -"\"No\"." -msgstr "" - -#: ../../help.pm_.c:849 -msgid "" -"You can choose a security level for your system. Please refer to the manual " -"for complete\n" -" information. Basically, if you don't know what to choose, keep the default " -"option.\n" -msgstr "" - -#: ../../help.pm_.c:854 -msgid "" -"Your system is going to reboot.\n" +" * TV card: If a TV card has been detected on your system, it is displayed " +"here.\n" +"No modification possible at installation time.\n" "\n" -"After rebooting, your new Mandrake Linux system will load automatically.\n" -"If you want to boot into another existing operating system, please read\n" -"the additional instructions." +" * ISDN card: If an ISDN card has been detected on your system, it is " +"displayed\n" +"here. You can click on the button to change the associated parameters." msgstr "" -#: ../../install_any.pm_.c:411 +#: ../../install_any.pm_.c:415 #, c-format msgid "" "You have selected the following server(s): %s\n" @@ -2941,26 +2570,26 @@ msgid "" "Do you really want to install these servers?\n" msgstr "" -#: ../../install_any.pm_.c:447 +#: ../../install_any.pm_.c:451 msgid "Can't use broadcast with no NIS domain" msgstr "" -#: ../../install_any.pm_.c:751 +#: ../../install_any.pm_.c:756 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "" -#: ../../install_any.pm_.c:755 +#: ../../install_any.pm_.c:760 msgid "This floppy is not FAT formatted" msgstr "" -#: ../../install_any.pm_.c:767 +#: ../../install_any.pm_.c:772 msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" -#: ../../install_any.pm_.c:789 ../../partition_table.pm_.c:717 +#: ../../install_any.pm_.c:794 ../../partition_table.pm_.c:725 #, c-format msgid "Error reading file %s" msgstr "" @@ -2969,8 +2598,8 @@ msgstr "" #: ../../interactive.pm_.c:105 ../../interactive.pm_.c:120 #: ../../interactive.pm_.c:284 ../../interactive.pm_.c:304 #: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170 -#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:412 -#: ../../my_gtk.pm_.c:673 ../../my_gtk.pm_.c:695 +#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:414 +#: ../../my_gtk.pm_.c:675 ../../my_gtk.pm_.c:697 msgid "Ok" msgstr "" @@ -3011,7 +2640,7 @@ msgid "" "Continue anyway?" msgstr "" -#: ../../install_interactive.pm_.c:50 ../../install_steps.pm_.c:164 +#: ../../install_interactive.pm_.c:50 ../../install_steps.pm_.c:162 msgid "You must have a FAT partition mounted in /boot/efi" msgstr "" @@ -3168,12 +2797,12 @@ msgid "" "Continue at your own risk." msgstr "" -#: ../../install_steps.pm_.c:215 +#: ../../install_steps.pm_.c:204 #, c-format msgid "Duplicate mount point %s" msgstr "" -#: ../../install_steps.pm_.c:393 +#: ../../install_steps.pm_.c:379 msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" @@ -3181,12 +2810,12 @@ msgid "" "\"\n" msgstr "" -#: ../../install_steps.pm_.c:458 +#: ../../install_steps.pm_.c:442 #, c-format msgid "Welcome to %s" msgstr "" -#: ../../install_steps.pm_.c:502 ../../install_steps.pm_.c:708 +#: ../../install_steps.pm_.c:486 ../../install_steps.pm_.c:685 msgid "No floppy drive available" msgstr "" @@ -3204,31 +2833,31 @@ msgstr "" msgid "Total size: " msgstr "" -#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:375 +#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:374 #, c-format msgid "Version: %s\n" msgstr "" -#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:376 +#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:375 #, c-format msgid "Size: %d KB\n" msgstr "" -#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:469 +#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:468 #: ../../install_steps_interactive.pm_.c:517 msgid "Choose the packages you want to install" msgstr "" -#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:559 +#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:562 msgid "Info" msgstr "" -#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:445 +#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:444 #: ../../install_steps_interactive.pm_.c:227 msgid "Install" msgstr "" -#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:485 +#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:484 #: ../../install_steps_interactive.pm_.c:703 msgid "Installing" msgstr "" @@ -3237,7 +2866,7 @@ msgstr "" msgid "Please wait, " msgstr "" -#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:498 +#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:497 msgid "Time remaining " msgstr "" @@ -3250,17 +2879,17 @@ msgstr "" msgid "Preparing installation" msgstr "" -#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:546 +#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:545 #, c-format msgid "Installing package %s" msgstr "" -#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:623 -#: ../../install_steps_gtk.pm_.c:627 +#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:622 +#: ../../install_steps_gtk.pm_.c:626 msgid "Go on anyway?" msgstr "" -#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:623 +#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:622 msgid "There was an error ordering packages:" msgstr "" @@ -3328,85 +2957,85 @@ msgstr "" msgid "Total size: %d / %d MB" msgstr "" -#: ../../install_steps_gtk.pm_.c:373 +#: ../../install_steps_gtk.pm_.c:372 msgid "Bad package" msgstr "" -#: ../../install_steps_gtk.pm_.c:374 +#: ../../install_steps_gtk.pm_.c:373 #, c-format msgid "Name: %s\n" msgstr "" -#: ../../install_steps_gtk.pm_.c:377 +#: ../../install_steps_gtk.pm_.c:376 #, c-format msgid "Importance: %s\n" msgstr "" -#: ../../install_steps_gtk.pm_.c:399 +#: ../../install_steps_gtk.pm_.c:398 msgid "" "You can't select this package as there is not enough space left to install it" msgstr "" -#: ../../install_steps_gtk.pm_.c:404 +#: ../../install_steps_gtk.pm_.c:403 msgid "The following packages are going to be installed" msgstr "" -#: ../../install_steps_gtk.pm_.c:405 +#: ../../install_steps_gtk.pm_.c:404 msgid "The following packages are going to be removed" msgstr "" -#: ../../install_steps_gtk.pm_.c:417 +#: ../../install_steps_gtk.pm_.c:416 msgid "You can't select/unselect this package" msgstr "" -#: ../../install_steps_gtk.pm_.c:429 +#: ../../install_steps_gtk.pm_.c:428 msgid "This is a mandatory package, it can't be unselected" msgstr "" -#: ../../install_steps_gtk.pm_.c:431 +#: ../../install_steps_gtk.pm_.c:430 msgid "You can't unselect this package. It is already installed" msgstr "" -#: ../../install_steps_gtk.pm_.c:435 +#: ../../install_steps_gtk.pm_.c:434 msgid "" "This package must be upgraded\n" "Are you sure you want to deselect it?" msgstr "" -#: ../../install_steps_gtk.pm_.c:439 +#: ../../install_steps_gtk.pm_.c:438 msgid "You can't unselect this package. It must be upgraded" msgstr "" -#: ../../install_steps_gtk.pm_.c:444 +#: ../../install_steps_gtk.pm_.c:443 msgid "Show automatically selected packages" msgstr "" -#: ../../install_steps_gtk.pm_.c:448 +#: ../../install_steps_gtk.pm_.c:447 msgid "Load/Save on floppy" msgstr "" -#: ../../install_steps_gtk.pm_.c:449 +#: ../../install_steps_gtk.pm_.c:448 msgid "Updating package selection" msgstr "" -#: ../../install_steps_gtk.pm_.c:454 +#: ../../install_steps_gtk.pm_.c:453 msgid "Minimal install" msgstr "" -#: ../../install_steps_gtk.pm_.c:491 +#: ../../install_steps_gtk.pm_.c:490 msgid "Estimating" msgstr "" -#: ../../install_steps_gtk.pm_.c:510 +#: ../../install_steps_gtk.pm_.c:509 msgid "Please wait, preparing installation" msgstr "" -#: ../../install_steps_gtk.pm_.c:541 +#: ../../install_steps_gtk.pm_.c:540 #, c-format msgid "%d packages" msgstr "" -#: ../../install_steps_gtk.pm_.c:580 +#: ../../install_steps_gtk.pm_.c:579 msgid "" "\n" "Warning\n" @@ -3438,15 +3067,15 @@ msgid "" "copyright laws applicable to software programs.\n" msgstr "" -#: ../../install_steps_gtk.pm_.c:608 ../../install_steps_interactive.pm_.c:164 +#: ../../install_steps_gtk.pm_.c:607 ../../install_steps_interactive.pm_.c:164 msgid "Accept" msgstr "" -#: ../../install_steps_gtk.pm_.c:608 ../../install_steps_interactive.pm_.c:164 +#: ../../install_steps_gtk.pm_.c:607 ../../install_steps_interactive.pm_.c:164 msgid "Refuse" msgstr "" -#: ../../install_steps_gtk.pm_.c:609 +#: ../../install_steps_gtk.pm_.c:608 #, c-format msgid "" "Change your Cd-Rom!\n" @@ -3456,7 +3085,7 @@ msgid "" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" -#: ../../install_steps_gtk.pm_.c:627 +#: ../../install_steps_gtk.pm_.c:626 msgid "There was an error installing packages:" msgstr "" @@ -3945,7 +3574,7 @@ msgstr "" msgid "Timezone" msgstr "" -#: ../../install_steps_interactive.pm_.c:877 ../../printerdrake.pm_.c:1279 +#: ../../install_steps_interactive.pm_.c:877 ../../printerdrake.pm_.c:1202 msgid "Printer" msgstr "" @@ -3961,67 +3590,67 @@ msgstr "" msgid "TV card" msgstr "" -#: ../../install_steps_interactive.pm_.c:923 -#: ../../install_steps_interactive.pm_.c:947 -#: ../../install_steps_interactive.pm_.c:951 +#: ../../install_steps_interactive.pm_.c:921 +#: ../../install_steps_interactive.pm_.c:945 +#: ../../install_steps_interactive.pm_.c:949 msgid "LDAP" msgstr "" -#: ../../install_steps_interactive.pm_.c:924 -#: ../../install_steps_interactive.pm_.c:947 -#: ../../install_steps_interactive.pm_.c:960 +#: ../../install_steps_interactive.pm_.c:922 +#: ../../install_steps_interactive.pm_.c:945 +#: ../../install_steps_interactive.pm_.c:958 msgid "NIS" msgstr "" -#: ../../install_steps_interactive.pm_.c:925 -#: ../../install_steps_interactive.pm_.c:947 +#: ../../install_steps_interactive.pm_.c:923 +#: ../../install_steps_interactive.pm_.c:945 msgid "Local files" msgstr "" -#: ../../install_steps_interactive.pm_.c:934 -#: ../../install_steps_interactive.pm_.c:935 ../../steps.pm_.c:24 +#: ../../install_steps_interactive.pm_.c:932 +#: ../../install_steps_interactive.pm_.c:933 ../../steps.pm_.c:24 msgid "Set root password" msgstr "" -#: ../../install_steps_interactive.pm_.c:936 +#: ../../install_steps_interactive.pm_.c:934 msgid "No password" msgstr "" -#: ../../install_steps_interactive.pm_.c:941 +#: ../../install_steps_interactive.pm_.c:939 #, c-format msgid "This password is too simple (must be at least %d characters long)" msgstr "" -#: ../../install_steps_interactive.pm_.c:947 ../../network/modem.pm_.c:47 -#: ../../standalone/draknet_.c:592 +#: ../../install_steps_interactive.pm_.c:945 ../../network/modem.pm_.c:47 +#: ../../standalone/draknet_.c:593 msgid "Authentication" msgstr "" -#: ../../install_steps_interactive.pm_.c:955 +#: ../../install_steps_interactive.pm_.c:953 msgid "Authentication LDAP" msgstr "" -#: ../../install_steps_interactive.pm_.c:956 +#: ../../install_steps_interactive.pm_.c:954 msgid "LDAP Base dn" msgstr "" -#: ../../install_steps_interactive.pm_.c:957 +#: ../../install_steps_interactive.pm_.c:955 msgid "LDAP Server" msgstr "" -#: ../../install_steps_interactive.pm_.c:963 +#: ../../install_steps_interactive.pm_.c:961 msgid "Authentication NIS" msgstr "" -#: ../../install_steps_interactive.pm_.c:964 +#: ../../install_steps_interactive.pm_.c:962 msgid "NIS Domain" msgstr "" -#: ../../install_steps_interactive.pm_.c:965 +#: ../../install_steps_interactive.pm_.c:963 msgid "NIS Server" msgstr "" -#: ../../install_steps_interactive.pm_.c:1000 +#: ../../install_steps_interactive.pm_.c:998 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " @@ -4039,19 +3668,19 @@ msgid "" "drive and press \"Ok\"." msgstr "" -#: ../../install_steps_interactive.pm_.c:1016 +#: ../../install_steps_interactive.pm_.c:1014 msgid "First floppy drive" msgstr "" -#: ../../install_steps_interactive.pm_.c:1017 +#: ../../install_steps_interactive.pm_.c:1015 msgid "Second floppy drive" msgstr "" -#: ../../install_steps_interactive.pm_.c:1018 ../../printerdrake.pm_.c:1106 +#: ../../install_steps_interactive.pm_.c:1016 ../../printerdrake.pm_.c:1030 msgid "Skip" msgstr "" -#: ../../install_steps_interactive.pm_.c:1023 +#: ../../install_steps_interactive.pm_.c:1021 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " @@ -4065,28 +3694,28 @@ msgid "" "failures. Would you like to create a bootdisk for your system?" msgstr "" -#: ../../install_steps_interactive.pm_.c:1032 +#: ../../install_steps_interactive.pm_.c:1030 msgid "Sorry, no floppy drive available" msgstr "" -#: ../../install_steps_interactive.pm_.c:1036 +#: ../../install_steps_interactive.pm_.c:1034 msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "" -#: ../../install_steps_interactive.pm_.c:1040 +#: ../../install_steps_interactive.pm_.c:1038 #, c-format msgid "Insert a floppy in drive %s" msgstr "" -#: ../../install_steps_interactive.pm_.c:1043 +#: ../../install_steps_interactive.pm_.c:1041 msgid "Creating bootdisk" msgstr "" -#: ../../install_steps_interactive.pm_.c:1050 +#: ../../install_steps_interactive.pm_.c:1048 msgid "Preparing bootloader" msgstr "" -#: ../../install_steps_interactive.pm_.c:1061 +#: ../../install_steps_interactive.pm_.c:1059 msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" @@ -4094,65 +3723,66 @@ msgid "" " need to use BootX to boot your machine" msgstr "" -#: ../../install_steps_interactive.pm_.c:1066 +#: ../../install_steps_interactive.pm_.c:1064 msgid "Do you want to use aboot?" msgstr "" -#: ../../install_steps_interactive.pm_.c:1069 +#: ../../install_steps_interactive.pm_.c:1067 msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" -#: ../../install_steps_interactive.pm_.c:1078 +#: ../../install_steps_interactive.pm_.c:1076 msgid "Installation of bootloader failed. The following error occured:" msgstr "" -#: ../../install_steps_interactive.pm_.c:1086 +#: ../../install_steps_interactive.pm_.c:1084 +#, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" -" setenv boot-device $of_boot,\\\\:tbxi\n" +" setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" -#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:23 +#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23 msgid "Low" msgstr "" -#: ../../install_steps_interactive.pm_.c:1095 ../../standalone/draksec_.c:24 +#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24 msgid "Medium" msgstr "" -#: ../../install_steps_interactive.pm_.c:1096 ../../standalone/draksec_.c:25 +#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25 msgid "High" msgstr "" -#: ../../install_steps_interactive.pm_.c:1100 ../../standalone/draksec_.c:52 +#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:59 msgid "Choose security level" msgstr "" -#: ../../install_steps_interactive.pm_.c:1136 +#: ../../install_steps_interactive.pm_.c:1134 #: ../../standalone/drakautoinst_.c:79 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "" -#: ../../install_steps_interactive.pm_.c:1140 +#: ../../install_steps_interactive.pm_.c:1138 #: ../../standalone/drakautoinst_.c:81 msgid "Creating auto install floppy" msgstr "" -#: ../../install_steps_interactive.pm_.c:1151 +#: ../../install_steps_interactive.pm_.c:1149 msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" -#: ../../install_steps_interactive.pm_.c:1162 +#: ../../install_steps_interactive.pm_.c:1160 msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" @@ -4165,11 +3795,11 @@ msgid "" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" -#: ../../install_steps_interactive.pm_.c:1174 +#: ../../install_steps_interactive.pm_.c:1172 msgid "Generate auto install floppy" msgstr "" -#: ../../install_steps_interactive.pm_.c:1176 +#: ../../install_steps_interactive.pm_.c:1174 msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" @@ -4178,15 +3808,15 @@ msgid "" "You may prefer to replay the installation.\n" msgstr "" -#: ../../install_steps_interactive.pm_.c:1181 +#: ../../install_steps_interactive.pm_.c:1179 msgid "Automated" msgstr "" -#: ../../install_steps_interactive.pm_.c:1181 +#: ../../install_steps_interactive.pm_.c:1179 msgid "Replay" msgstr "" -#: ../../install_steps_interactive.pm_.c:1184 +#: ../../install_steps_interactive.pm_.c:1182 msgid "Save packages selection" msgstr "" @@ -4216,15 +3846,15 @@ msgstr "" msgid "Please wait" msgstr "" -#: ../../interactive_gtk.pm_.c:669 +#: ../../interactive_gtk.pm_.c:672 msgid "Expand Tree" msgstr "" -#: ../../interactive_gtk.pm_.c:670 +#: ../../interactive_gtk.pm_.c:673 msgid "Collapse Tree" msgstr "" -#: ../../interactive_gtk.pm_.c:671 +#: ../../interactive_gtk.pm_.c:674 msgid "Toggle between flat and group sorted" msgstr "" @@ -4253,11 +3883,11 @@ msgstr "" msgid "Your choice? (default %s enter `none' for none) " msgstr "" -#: ../../keyboard.pm_.c:126 ../../keyboard.pm_.c:158 +#: ../../keyboard.pm_.c:126 ../../keyboard.pm_.c:164 msgid "Czech (QWERTZ)" msgstr "" -#: ../../keyboard.pm_.c:127 ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:161 +#: ../../keyboard.pm_.c:127 ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:166 msgid "German" msgstr "" @@ -4265,19 +3895,19 @@ msgstr "" msgid "Dvorak" msgstr "" -#: ../../keyboard.pm_.c:129 ../../keyboard.pm_.c:167 +#: ../../keyboard.pm_.c:129 ../../keyboard.pm_.c:172 msgid "Spanish" msgstr "" -#: ../../keyboard.pm_.c:130 ../../keyboard.pm_.c:168 +#: ../../keyboard.pm_.c:130 ../../keyboard.pm_.c:173 msgid "Finnish" msgstr "" -#: ../../keyboard.pm_.c:131 ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:169 +#: ../../keyboard.pm_.c:131 ../../keyboard.pm_.c:142 ../../keyboard.pm_.c:174 msgid "French" msgstr "" -#: ../../keyboard.pm_.c:132 ../../keyboard.pm_.c:190 +#: ../../keyboard.pm_.c:132 ../../keyboard.pm_.c:195 msgid "Norwegian" msgstr "" @@ -4285,244 +3915,240 @@ msgstr "" msgid "Polish" msgstr "" -#: ../../keyboard.pm_.c:134 ../../keyboard.pm_.c:198 +#: ../../keyboard.pm_.c:134 ../../keyboard.pm_.c:203 msgid "Russian" msgstr "" -#: ../../keyboard.pm_.c:135 ../../keyboard.pm_.c:209 +#: ../../keyboard.pm_.c:136 ../../keyboard.pm_.c:205 +msgid "Swedish" +msgstr "" + +#: ../../keyboard.pm_.c:137 ../../keyboard.pm_.c:220 msgid "UK keyboard" msgstr "" -#: ../../keyboard.pm_.c:136 ../../keyboard.pm_.c:139 ../../keyboard.pm_.c:210 +#: ../../keyboard.pm_.c:138 ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:221 msgid "US keyboard" msgstr "" -#: ../../keyboard.pm_.c:143 +#: ../../keyboard.pm_.c:145 msgid "Albanian" msgstr "" -#: ../../keyboard.pm_.c:144 +#: ../../keyboard.pm_.c:146 msgid "Armenian (old)" msgstr "" -#: ../../keyboard.pm_.c:145 +#: ../../keyboard.pm_.c:147 msgid "Armenian (typewriter)" msgstr "" -#: ../../keyboard.pm_.c:146 +#: ../../keyboard.pm_.c:148 msgid "Armenian (phonetic)" msgstr "" -#: ../../keyboard.pm_.c:150 +#: ../../keyboard.pm_.c:153 msgid "Azerbaidjani (latin)" msgstr "" -#: ../../keyboard.pm_.c:151 -msgid "Azerbaidjani (cyrillic)" -msgstr "" - -#: ../../keyboard.pm_.c:152 +#: ../../keyboard.pm_.c:155 msgid "Belgian" msgstr "" -#: ../../keyboard.pm_.c:153 +#: ../../keyboard.pm_.c:156 msgid "Bulgarian" msgstr "" -#: ../../keyboard.pm_.c:154 +#: ../../keyboard.pm_.c:157 msgid "Brazilian (ABNT-2)" msgstr "" -#: ../../keyboard.pm_.c:155 +#: ../../keyboard.pm_.c:158 msgid "Belarusian" msgstr "" -#: ../../keyboard.pm_.c:156 +#: ../../keyboard.pm_.c:159 msgid "Swiss (German layout)" msgstr "" -#: ../../keyboard.pm_.c:157 +#: ../../keyboard.pm_.c:160 msgid "Swiss (French layout)" msgstr "" -#: ../../keyboard.pm_.c:159 +#: ../../keyboard.pm_.c:165 msgid "Czech (QWERTY)" msgstr "" -#: ../../keyboard.pm_.c:160 -msgid "Czech (Programmers)" -msgstr "" - -#: ../../keyboard.pm_.c:162 +#: ../../keyboard.pm_.c:167 msgid "German (no dead keys)" msgstr "" -#: ../../keyboard.pm_.c:163 +#: ../../keyboard.pm_.c:168 msgid "Danish" msgstr "" -#: ../../keyboard.pm_.c:164 +#: ../../keyboard.pm_.c:169 msgid "Dvorak (US)" msgstr "" -#: ../../keyboard.pm_.c:165 +#: ../../keyboard.pm_.c:170 msgid "Dvorak (Norwegian)" msgstr "" -#: ../../keyboard.pm_.c:166 +#: ../../keyboard.pm_.c:171 msgid "Estonian" msgstr "" -#: ../../keyboard.pm_.c:170 +#: ../../keyboard.pm_.c:175 msgid "Georgian (\"Russian\" layout)" msgstr "" -#: ../../keyboard.pm_.c:171 +#: ../../keyboard.pm_.c:176 msgid "Georgian (\"Latin\" layout)" msgstr "" -#: ../../keyboard.pm_.c:172 +#: ../../keyboard.pm_.c:177 msgid "Greek" msgstr "" -#: ../../keyboard.pm_.c:173 +#: ../../keyboard.pm_.c:178 msgid "Hungarian" msgstr "" -#: ../../keyboard.pm_.c:174 +#: ../../keyboard.pm_.c:179 msgid "Croatian" msgstr "" -#: ../../keyboard.pm_.c:175 +#: ../../keyboard.pm_.c:180 msgid "Israeli" msgstr "" -#: ../../keyboard.pm_.c:176 +#: ../../keyboard.pm_.c:181 msgid "Israeli (Phonetic)" msgstr "" -#: ../../keyboard.pm_.c:177 +#: ../../keyboard.pm_.c:182 msgid "Iranian" msgstr "" -#: ../../keyboard.pm_.c:178 +#: ../../keyboard.pm_.c:183 msgid "Icelandic" msgstr "" -#: ../../keyboard.pm_.c:179 +#: ../../keyboard.pm_.c:184 msgid "Italian" msgstr "" -#: ../../keyboard.pm_.c:180 +#: ../../keyboard.pm_.c:185 msgid "Japanese 106 keys" msgstr "" -#: ../../keyboard.pm_.c:181 +#: ../../keyboard.pm_.c:186 msgid "Korean keyboard" msgstr "" -#: ../../keyboard.pm_.c:182 +#: ../../keyboard.pm_.c:187 msgid "Latin American" msgstr "" -#: ../../keyboard.pm_.c:183 -msgid "Macedonian" -msgstr "" - -#: ../../keyboard.pm_.c:184 -msgid "Dutch" -msgstr "" - -#: ../../keyboard.pm_.c:185 +#: ../../keyboard.pm_.c:188 msgid "Lithuanian AZERTY (old)" msgstr "" -#: ../../keyboard.pm_.c:187 +#: ../../keyboard.pm_.c:190 msgid "Lithuanian AZERTY (new)" msgstr "" -#: ../../keyboard.pm_.c:188 +#: ../../keyboard.pm_.c:191 msgid "Lithuanian \"number row\" QWERTY" msgstr "" -#: ../../keyboard.pm_.c:189 +#: ../../keyboard.pm_.c:192 msgid "Lithuanian \"phonetic\" QWERTY" msgstr "" -#: ../../keyboard.pm_.c:191 +#: ../../keyboard.pm_.c:193 +msgid "Macedonian" +msgstr "" + +#: ../../keyboard.pm_.c:194 +msgid "Dutch" +msgstr "" + +#: ../../keyboard.pm_.c:196 msgid "Polish (qwerty layout)" msgstr "" -#: ../../keyboard.pm_.c:192 +#: ../../keyboard.pm_.c:197 msgid "Polish (qwertz layout)" msgstr "" -#: ../../keyboard.pm_.c:193 +#: ../../keyboard.pm_.c:198 msgid "Portuguese" msgstr "" -#: ../../keyboard.pm_.c:194 +#: ../../keyboard.pm_.c:199 msgid "Canadian (Quebec)" msgstr "" -#: ../../keyboard.pm_.c:196 +#: ../../keyboard.pm_.c:201 msgid "Romanian (qwertz)" msgstr "" -#: ../../keyboard.pm_.c:197 +#: ../../keyboard.pm_.c:202 msgid "Romanian (qwerty)" msgstr "" -#: ../../keyboard.pm_.c:199 +#: ../../keyboard.pm_.c:204 msgid "Russian (Yawerty)" msgstr "" -#: ../../keyboard.pm_.c:200 -msgid "Swedish" -msgstr "" - -#: ../../keyboard.pm_.c:201 +#: ../../keyboard.pm_.c:206 msgid "Slovenian" msgstr "" -#: ../../keyboard.pm_.c:202 +#: ../../keyboard.pm_.c:210 msgid "Slovakian (QWERTZ)" msgstr "" -#: ../../keyboard.pm_.c:203 +#: ../../keyboard.pm_.c:211 msgid "Slovakian (QWERTY)" msgstr "" -#: ../../keyboard.pm_.c:204 -msgid "Slovakian (Programmers)" +#: ../../keyboard.pm_.c:213 +msgid "Serbian (cyrillic)" msgstr "" -#: ../../keyboard.pm_.c:205 +#: ../../keyboard.pm_.c:214 msgid "Thai keyboard" msgstr "" -#: ../../keyboard.pm_.c:206 +#: ../../keyboard.pm_.c:216 +msgid "Tajik keyboard" +msgstr "" + +#: ../../keyboard.pm_.c:217 msgid "Turkish (traditional \"F\" model)" msgstr "" -#: ../../keyboard.pm_.c:207 +#: ../../keyboard.pm_.c:218 msgid "Turkish (modern \"Q\" model)" msgstr "" -#: ../../keyboard.pm_.c:208 +#: ../../keyboard.pm_.c:219 msgid "Ukrainian" msgstr "" -#: ../../keyboard.pm_.c:211 +#: ../../keyboard.pm_.c:222 msgid "US keyboard (international)" msgstr "" -#: ../../keyboard.pm_.c:212 +#: ../../keyboard.pm_.c:223 msgid "Vietnamese \"numeric row\" QWERTY" msgstr "" -#: ../../keyboard.pm_.c:213 -msgid "Yugoslavian (latin/cyrillic)" +#: ../../keyboard.pm_.c:224 +msgid "Yugoslavian (latin)" msgstr "" #: ../../loopback.pm_.c:33 @@ -4642,59 +4268,59 @@ msgstr "" msgid "No mouse" msgstr "" -#: ../../my_gtk.pm_.c:377 +#: ../../my_gtk.pm_.c:379 msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" msgstr "" -#: ../../my_gtk.pm_.c:412 +#: ../../my_gtk.pm_.c:414 msgid "Finish" msgstr "" -#: ../../my_gtk.pm_.c:412 +#: ../../my_gtk.pm_.c:414 msgid "Next ->" msgstr "" -#: ../../my_gtk.pm_.c:413 +#: ../../my_gtk.pm_.c:415 msgid "<- Previous" msgstr "" -#: ../../my_gtk.pm_.c:673 +#: ../../my_gtk.pm_.c:675 msgid "Is this correct?" msgstr "" -#: ../../network/adsl.pm_.c:18 ../../network/ethernet.pm_.c:36 +#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36 msgid "Connect to the Internet" msgstr "" -#: ../../network/adsl.pm_.c:19 +#: ../../network/adsl.pm_.c:20 msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few ones use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" -#: ../../network/adsl.pm_.c:21 +#: ../../network/adsl.pm_.c:22 msgid "speedtouch usb" msgstr "" -#: ../../network/adsl.pm_.c:21 +#: ../../network/adsl.pm_.c:22 msgid "use dhcp" msgstr "" -#: ../../network/adsl.pm_.c:21 +#: ../../network/adsl.pm_.c:22 msgid "use pppoe" msgstr "" -#: ../../network/adsl.pm_.c:21 +#: ../../network/adsl.pm_.c:22 msgid "use pptp" msgstr "" -#: ../../network/adsl.pm_.c:30 ../../network/ethernet.pm_.c:108 +#: ../../network/adsl.pm_.c:31 ../../network/ethernet.pm_.c:108 #: ../../network/ethernet.pm_.c:174 ../../standalone/drakgw_.c:223 msgid "Network interface" msgstr "" -#: ../../network/adsl.pm_.c:31 ../../network/ethernet.pm_.c:175 +#: ../../network/adsl.pm_.c:32 ../../network/ethernet.pm_.c:175 #, c-format msgid "I'm about to restart the network device %s. Do you agree?" msgstr "" @@ -4722,7 +4348,7 @@ msgid "" msgstr "" #: ../../network/ethernet.pm_.c:67 ../../network/netconnect.pm_.c:130 -#: ../../network/netconnect.pm_.c:233 ../../network/tools.pm_.c:52 +#: ../../network/netconnect.pm_.c:235 ../../network/tools.pm_.c:52 msgid "Network Configuration" msgstr "" @@ -4775,7 +4401,7 @@ msgstr "" #: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:106 #: ../../network/netconnect.pm_.c:155 ../../network/netconnect.pm_.c:165 #: ../../network/netconnect.pm_.c:184 ../../network/netconnect.pm_.c:205 -#: ../../network/netconnect.pm_.c:212 +#: ../../network/netconnect.pm_.c:213 msgid "Network Configuration Wizard" msgstr "" @@ -4900,39 +4526,39 @@ msgstr "" msgid "Dialup options" msgstr "" -#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:588 +#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:589 msgid "Connection name" msgstr "" -#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:589 +#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:590 msgid "Phone number" msgstr "" -#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:590 +#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:591 msgid "Login ID" msgstr "" -#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:592 +#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:593 msgid "PAP" msgstr "" -#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:592 +#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:593 msgid "Script-based" msgstr "" -#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:592 +#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:593 msgid "Terminal-based" msgstr "" -#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:593 +#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:594 msgid "Domain name" msgstr "" -#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:594 +#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:595 msgid "First DNS Server (optional)" msgstr "" -#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:595 +#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:596 msgid "Second DNS Server (optional)" msgstr "" @@ -5085,18 +4711,18 @@ msgstr "" msgid "Internet connection" msgstr "" -#: ../../network/netconnect.pm_.c:212 +#: ../../network/netconnect.pm_.c:213 msgid "Do you want to start the connection at boot?" msgstr "" -#: ../../network/netconnect.pm_.c:225 +#: ../../network/netconnect.pm_.c:227 msgid "" "Congratulation, The network and internet configuration is finished.\n" "\n" "The configuration will now be applied to your system.\n" msgstr "" -#: ../../network/netconnect.pm_.c:228 +#: ../../network/netconnect.pm_.c:230 msgid "" "After that is done, we recommend you to restart your X\n" "environnement to avoid hostname changing problem." @@ -5128,11 +4754,11 @@ msgid " (driver %s)" msgstr "" #: ../../network/network.pm_.c:292 ../../standalone/draknet_.c:248 -#: ../../standalone/draknet_.c:449 +#: ../../standalone/draknet_.c:450 msgid "IP address" msgstr "" -#: ../../network/network.pm_.c:293 ../../standalone/draknet_.c:450 +#: ../../network/network.pm_.c:293 ../../standalone/draknet_.c:451 msgid "Netmask" msgstr "" @@ -5144,7 +4770,7 @@ msgstr "" msgid "Automatic IP" msgstr "" -#: ../../network/network.pm_.c:315 ../../printerdrake.pm_.c:356 +#: ../../network/network.pm_.c:315 ../../printerdrake.pm_.c:345 msgid "IP address should be in format 1.2.3.4" msgstr "" @@ -5160,7 +4786,7 @@ msgstr "" msgid "DNS server" msgstr "" -#: ../../network/network.pm_.c:349 ../../standalone/draknet_.c:587 +#: ../../network/network.pm_.c:349 ../../standalone/draknet_.c:588 msgid "Gateway" msgstr "" @@ -5222,43 +4848,43 @@ msgstr "" msgid "Please fill or check the field below" msgstr "" -#: ../../network/tools.pm_.c:74 ../../standalone/draknet_.c:574 +#: ../../network/tools.pm_.c:74 ../../standalone/draknet_.c:575 msgid "Card IRQ" msgstr "" -#: ../../network/tools.pm_.c:75 ../../standalone/draknet_.c:575 +#: ../../network/tools.pm_.c:75 ../../standalone/draknet_.c:576 msgid "Card mem (DMA)" msgstr "" -#: ../../network/tools.pm_.c:76 ../../standalone/draknet_.c:576 +#: ../../network/tools.pm_.c:76 ../../standalone/draknet_.c:577 msgid "Card IO" msgstr "" -#: ../../network/tools.pm_.c:77 ../../standalone/draknet_.c:577 +#: ../../network/tools.pm_.c:77 ../../standalone/draknet_.c:578 msgid "Card IO_0" msgstr "" -#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:578 +#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:579 msgid "Card IO_1" msgstr "" -#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:579 +#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:580 msgid "Your personal phone number" msgstr "" -#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:580 +#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:581 msgid "Provider name (ex provider.net)" msgstr "" -#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:581 +#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:582 msgid "Provider phone number" msgstr "" -#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:582 +#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:583 msgid "Provider dns 1 (optional)" msgstr "" -#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:583 +#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:584 msgid "Provider dns 2 (optional)" msgstr "" @@ -5266,11 +4892,11 @@ msgstr "" msgid "Choose your country" msgstr "" -#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:586 +#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:587 msgid "Dialing mode" msgstr "" -#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:598 +#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:599 msgid "Connection speed" msgstr "" @@ -5278,35 +4904,35 @@ msgstr "" msgid "Connection timeout (in sec)" msgstr "" -#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:584 +#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:585 msgid "Account Login (user name)" msgstr "" -#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:585 +#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:586 msgid "Account Password" msgstr "" -#: ../../partition_table.pm_.c:605 +#: ../../partition_table.pm_.c:613 msgid "Extended partition not supported on this platform" msgstr "" -#: ../../partition_table.pm_.c:623 +#: ../../partition_table.pm_.c:631 msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions" msgstr "" -#: ../../partition_table.pm_.c:724 +#: ../../partition_table.pm_.c:732 #, c-format msgid "Restoring from file %s failed: %s" msgstr "" -#: ../../partition_table.pm_.c:726 +#: ../../partition_table.pm_.c:734 msgid "Bad backup file" msgstr "" -#: ../../partition_table.pm_.c:748 +#: ../../partition_table.pm_.c:756 #, c-format msgid "Error writing to file %s" msgstr "" @@ -5407,7 +5033,7 @@ msgid "Pipe job into a command" msgstr "" #: ../../printer.pm_.c:209 ../../printer.pm_.c:557 -#: ../../printerdrake.pm_.c:1419 +#: ../../printerdrake.pm_.c:1336 msgid "Unknown model" msgstr "" @@ -5452,7 +5078,7 @@ msgid "" "these fields blank." msgstr "" -#: ../../printerdrake.pm_.c:91 ../../printerdrake.pm_.c:1407 +#: ../../printerdrake.pm_.c:91 ../../printerdrake.pm_.c:1324 msgid "Close" msgstr "" @@ -5464,7 +5090,7 @@ msgstr "" msgid "The IP address should look like 192.168.1.20" msgstr "" -#: ../../printerdrake.pm_.c:101 ../../printerdrake.pm_.c:491 +#: ../../printerdrake.pm_.c:101 ../../printerdrake.pm_.c:469 msgid "The port number should be an integer!" msgstr "" @@ -5476,7 +5102,7 @@ msgstr "" msgid "CUPS server IP" msgstr "" -#: ../../printerdrake.pm_.c:114 ../../printerdrake.pm_.c:484 +#: ../../printerdrake.pm_.c:114 ../../printerdrake.pm_.c:462 msgid "Port" msgstr "" @@ -5484,61 +5110,61 @@ msgstr "" msgid "Test ports" msgstr "" -#: ../../printerdrake.pm_.c:195 +#: ../../printerdrake.pm_.c:192 #, c-format msgid "A printer, model \"%s\", has been detected on " msgstr "" -#: ../../printerdrake.pm_.c:212 +#: ../../printerdrake.pm_.c:209 msgid "Local Printer Device" msgstr "" -#: ../../printerdrake.pm_.c:213 +#: ../../printerdrake.pm_.c:210 msgid "" "What device is your printer connected to \n" "(note that /dev/lp0 is equivalent to LPT1:)?\n" msgstr "" -#: ../../printerdrake.pm_.c:215 +#: ../../printerdrake.pm_.c:212 msgid "Printer Device" msgstr "" -#: ../../printerdrake.pm_.c:218 +#: ../../printerdrake.pm_.c:215 msgid "Device/file name missing!" msgstr "" -#: ../../printerdrake.pm_.c:261 +#: ../../printerdrake.pm_.c:256 msgid "Remote lpd Printer Options" msgstr "" -#: ../../printerdrake.pm_.c:262 +#: ../../printerdrake.pm_.c:257 msgid "" "To use a remote lpd printer, you need to supply\n" "the hostname of the printer server and the printer name\n" "on that server." msgstr "" -#: ../../printerdrake.pm_.c:265 +#: ../../printerdrake.pm_.c:260 msgid "Remote host name" msgstr "" -#: ../../printerdrake.pm_.c:266 +#: ../../printerdrake.pm_.c:261 msgid "Remote printer name" msgstr "" -#: ../../printerdrake.pm_.c:269 +#: ../../printerdrake.pm_.c:264 msgid "Remote host name missing!" msgstr "" -#: ../../printerdrake.pm_.c:273 +#: ../../printerdrake.pm_.c:268 msgid "Remote printer name missing!" msgstr "" -#: ../../printerdrake.pm_.c:342 +#: ../../printerdrake.pm_.c:331 msgid "SMB (Windows 9x/NT) Printer Options" msgstr "" -#: ../../printerdrake.pm_.c:343 +#: ../../printerdrake.pm_.c:332 msgid "" "To print to a SMB printer, you need to provide the\n" "SMB host name (Note! It may be different from its\n" @@ -5547,35 +5173,35 @@ msgid "" "applicable user name, password, and workgroup information." msgstr "" -#: ../../printerdrake.pm_.c:348 +#: ../../printerdrake.pm_.c:337 msgid "SMB server host" msgstr "" -#: ../../printerdrake.pm_.c:349 +#: ../../printerdrake.pm_.c:338 msgid "SMB server IP" msgstr "" -#: ../../printerdrake.pm_.c:350 +#: ../../printerdrake.pm_.c:339 msgid "Share name" msgstr "" -#: ../../printerdrake.pm_.c:353 +#: ../../printerdrake.pm_.c:342 msgid "Workgroup" msgstr "" -#: ../../printerdrake.pm_.c:360 +#: ../../printerdrake.pm_.c:349 msgid "Either the server name or the server's IP must be given!" msgstr "" -#: ../../printerdrake.pm_.c:364 +#: ../../printerdrake.pm_.c:353 msgid "Samba share name missing!" msgstr "" -#: ../../printerdrake.pm_.c:423 +#: ../../printerdrake.pm_.c:407 msgid "NetWare Printer Options" msgstr "" -#: ../../printerdrake.pm_.c:424 +#: ../../printerdrake.pm_.c:408 msgid "" "To print on a NetWare printer, you need to provide the\n" "NetWare print server name (Note! it may be different from its\n" @@ -5583,27 +5209,27 @@ msgid "" "wish to access and any applicable user name and password." msgstr "" -#: ../../printerdrake.pm_.c:428 +#: ../../printerdrake.pm_.c:412 msgid "Printer Server" msgstr "" -#: ../../printerdrake.pm_.c:429 +#: ../../printerdrake.pm_.c:413 msgid "Print Queue Name" msgstr "" -#: ../../printerdrake.pm_.c:434 +#: ../../printerdrake.pm_.c:418 msgid "NCP server name missing!" msgstr "" -#: ../../printerdrake.pm_.c:438 +#: ../../printerdrake.pm_.c:422 msgid "NCP queue name missing!" msgstr "" -#: ../../printerdrake.pm_.c:477 +#: ../../printerdrake.pm_.c:455 msgid "Socket Printer Options" msgstr "" -#: ../../printerdrake.pm_.c:478 +#: ../../printerdrake.pm_.c:456 msgid "" "To print to a socket printer, you need to provide the\n" "host name of the printer and optionally the port number.\n" @@ -5612,57 +5238,57 @@ msgid "" "hardware." msgstr "" -#: ../../printerdrake.pm_.c:483 +#: ../../printerdrake.pm_.c:461 msgid "Printer host name" msgstr "" -#: ../../printerdrake.pm_.c:487 +#: ../../printerdrake.pm_.c:465 msgid "Printer host name missing!" msgstr "" -#: ../../printerdrake.pm_.c:515 ../../printerdrake.pm_.c:517 +#: ../../printerdrake.pm_.c:493 ../../printerdrake.pm_.c:495 msgid "Printer Device URI" msgstr "" -#: ../../printerdrake.pm_.c:516 +#: ../../printerdrake.pm_.c:494 msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" -#: ../../printerdrake.pm_.c:531 +#: ../../printerdrake.pm_.c:509 msgid "A valid URI must be entered!" msgstr "" -#: ../../printerdrake.pm_.c:626 +#: ../../printerdrake.pm_.c:604 msgid "" "Every printer needs a name (for example lp).\n" "The Description and Location fields do not need \n" "to be filled in. They are comments for the users." msgstr "" -#: ../../printerdrake.pm_.c:630 +#: ../../printerdrake.pm_.c:607 msgid "Name of printer" msgstr "" -#: ../../printerdrake.pm_.c:632 +#: ../../printerdrake.pm_.c:608 msgid "Description" msgstr "" -#: ../../printerdrake.pm_.c:634 +#: ../../printerdrake.pm_.c:609 msgid "Location" msgstr "" -#: ../../printerdrake.pm_.c:746 +#: ../../printerdrake.pm_.c:705 msgid "Printer model selection" msgstr "" -#: ../../printerdrake.pm_.c:747 +#: ../../printerdrake.pm_.c:706 msgid "Which printer model do you have?" msgstr "" -#: ../../printerdrake.pm_.c:886 +#: ../../printerdrake.pm_.c:827 msgid "" "Printer default settings\n" "You should make sure that the page size and the\n" @@ -5671,26 +5297,26 @@ msgid "" "can get substantially slower." msgstr "" -#: ../../printerdrake.pm_.c:901 +#: ../../printerdrake.pm_.c:838 #, c-format msgid "Option %s must be an integer number!" msgstr "" -#: ../../printerdrake.pm_.c:908 +#: ../../printerdrake.pm_.c:842 #, c-format msgid "Option %s must be a number!" msgstr "" -#: ../../printerdrake.pm_.c:916 +#: ../../printerdrake.pm_.c:847 #, c-format msgid "Option %s out of range!" msgstr "" -#: ../../printerdrake.pm_.c:964 +#: ../../printerdrake.pm_.c:888 msgid "Test pages" msgstr "" -#: ../../printerdrake.pm_.c:965 +#: ../../printerdrake.pm_.c:889 msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed\n" @@ -5698,35 +5324,35 @@ msgid "" "In most cases it is enough to print the standard test page." msgstr "" -#: ../../printerdrake.pm_.c:970 +#: ../../printerdrake.pm_.c:894 msgid "No test pages" msgstr "" -#: ../../printerdrake.pm_.c:971 +#: ../../printerdrake.pm_.c:895 msgid "Print" msgstr "" -#: ../../printerdrake.pm_.c:973 +#: ../../printerdrake.pm_.c:897 msgid "Standard test page" msgstr "" -#: ../../printerdrake.pm_.c:976 +#: ../../printerdrake.pm_.c:900 msgid "Alternative test page (Letter)" msgstr "" -#: ../../printerdrake.pm_.c:979 +#: ../../printerdrake.pm_.c:903 msgid "Alternative test page (A4)" msgstr "" -#: ../../printerdrake.pm_.c:981 +#: ../../printerdrake.pm_.c:905 msgid "Photo test page" msgstr "" -#: ../../printerdrake.pm_.c:988 +#: ../../printerdrake.pm_.c:912 msgid "Printing test page(s)..." msgstr "" -#: ../../printerdrake.pm_.c:1013 +#: ../../printerdrake.pm_.c:937 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" @@ -5736,25 +5362,25 @@ msgid "" "\n" msgstr "" -#: ../../printerdrake.pm_.c:1017 +#: ../../printerdrake.pm_.c:941 msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" -#: ../../printerdrake.pm_.c:1024 +#: ../../printerdrake.pm_.c:948 msgid "Did it work properly?" msgstr "" -#: ../../printerdrake.pm_.c:1043 +#: ../../printerdrake.pm_.c:967 msgid "Reading printer data ..." msgstr "" -#: ../../printerdrake.pm_.c:1062 ../../printerdrake.pm_.c:1100 +#: ../../printerdrake.pm_.c:986 ../../printerdrake.pm_.c:1024 msgid "Transfer printer configuration" msgstr "" -#: ../../printerdrake.pm_.c:1063 +#: ../../printerdrake.pm_.c:987 #, c-format msgid "" "You can copy the printer configuration which you have done \n" @@ -5766,29 +5392,29 @@ msgid "" "reasons:\n" msgstr "" -#: ../../printerdrake.pm_.c:1071 +#: ../../printerdrake.pm_.c:995 msgid "" "CUPS does not support printers on Novell servers or printers\n" "sending the data into a free-formed command.\n" msgstr "" -#: ../../printerdrake.pm_.c:1074 +#: ../../printerdrake.pm_.c:998 msgid "" "PDQ only supports local printers, remote LPD printers, and\n" "Socket/TCP printers.\n" msgstr "" -#: ../../printerdrake.pm_.c:1077 +#: ../../printerdrake.pm_.c:1001 msgid "LPD and LPRng do not support IPP printers.\n" msgstr "" -#: ../../printerdrake.pm_.c:1079 +#: ../../printerdrake.pm_.c:1003 msgid "" "In addition, queues not created with this program or\n" "\"foomatic-configure\" cannot be transferred." msgstr "" -#: ../../printerdrake.pm_.c:1081 +#: ../../printerdrake.pm_.c:1005 msgid "" "\n" "Also printers configured with the PPD files provided by\n" @@ -5796,22 +5422,22 @@ msgid "" "transferred." msgstr "" -#: ../../printerdrake.pm_.c:1084 +#: ../../printerdrake.pm_.c:1008 msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" -#: ../../printerdrake.pm_.c:1087 +#: ../../printerdrake.pm_.c:1011 msgid "Do not transfer printers" msgstr "" -#: ../../printerdrake.pm_.c:1088 ../../printerdrake.pm_.c:1105 +#: ../../printerdrake.pm_.c:1012 ../../printerdrake.pm_.c:1029 msgid "Transfer" msgstr "" -#: ../../printerdrake.pm_.c:1101 +#: ../../printerdrake.pm_.c:1025 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" @@ -5819,110 +5445,110 @@ msgid "" "You can also type a new name or skip this printer." msgstr "" -#: ../../printerdrake.pm_.c:1109 +#: ../../printerdrake.pm_.c:1033 msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "" -#: ../../printerdrake.pm_.c:1114 +#: ../../printerdrake.pm_.c:1038 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" -#: ../../printerdrake.pm_.c:1122 +#: ../../printerdrake.pm_.c:1046 msgid "New printer name" msgstr "" -#: ../../printerdrake.pm_.c:1124 +#: ../../printerdrake.pm_.c:1048 #, c-format msgid "Transferring %s ..." msgstr "" -#: ../../printerdrake.pm_.c:1142 +#: ../../printerdrake.pm_.c:1066 msgid "Select Printer Spooler" msgstr "" -#: ../../printerdrake.pm_.c:1143 +#: ../../printerdrake.pm_.c:1067 msgid "Which printing system (spooler) do you want to use?" msgstr "" -#: ../../printerdrake.pm_.c:1188 +#: ../../printerdrake.pm_.c:1112 msgid "Removing LPRng..." msgstr "" -#: ../../printerdrake.pm_.c:1203 +#: ../../printerdrake.pm_.c:1127 msgid "Removing LPD..." msgstr "" -#: ../../printerdrake.pm_.c:1232 +#: ../../printerdrake.pm_.c:1156 msgid "Checking installed software..." msgstr "" -#: ../../printerdrake.pm_.c:1259 ../../printerdrake.pm_.c:1274 -#: ../../printerdrake.pm_.c:1420 ../../printerdrake.pm_.c:1483 +#: ../../printerdrake.pm_.c:1182 ../../printerdrake.pm_.c:1197 +#: ../../printerdrake.pm_.c:1337 ../../printerdrake.pm_.c:1397 msgid "Printer options" msgstr "" -#: ../../printerdrake.pm_.c:1280 +#: ../../printerdrake.pm_.c:1203 msgid "Would you like to configure printing?" msgstr "" -#: ../../printerdrake.pm_.c:1303 +#: ../../printerdrake.pm_.c:1224 msgid "" "The following printers are configured.\n" "You can add some more or modify the existing ones." msgstr "" -#: ../../printerdrake.pm_.c:1312 ../../printerdrake.pm_.c:1323 -#: ../../printerdrake.pm_.c:1326 ../../printerdrake.pm_.c:1372 +#: ../../printerdrake.pm_.c:1233 ../../printerdrake.pm_.c:1244 +#: ../../printerdrake.pm_.c:1247 ../../printerdrake.pm_.c:1290 msgid "Add printer" msgstr "" -#: ../../printerdrake.pm_.c:1315 +#: ../../printerdrake.pm_.c:1236 msgid "Spooler: " msgstr "" -#: ../../printerdrake.pm_.c:1401 +#: ../../printerdrake.pm_.c:1318 msgid "Modify printer configuration" msgstr "" -#: ../../printerdrake.pm_.c:1402 +#: ../../printerdrake.pm_.c:1319 #, c-format msgid "" "Printer %s: %s %s\n" "What do you want to modify on this printer?" msgstr "" -#: ../../printerdrake.pm_.c:1408 +#: ../../printerdrake.pm_.c:1325 msgid "Do it!" msgstr "" -#: ../../printerdrake.pm_.c:1411 ../../printerdrake.pm_.c:1454 +#: ../../printerdrake.pm_.c:1328 ../../printerdrake.pm_.c:1369 msgid "Printer connection type" msgstr "" -#: ../../printerdrake.pm_.c:1412 ../../printerdrake.pm_.c:1461 +#: ../../printerdrake.pm_.c:1329 ../../printerdrake.pm_.c:1376 msgid "Printer name, description, location" msgstr "" -#: ../../printerdrake.pm_.c:1414 ../../printerdrake.pm_.c:1473 +#: ../../printerdrake.pm_.c:1331 ../../printerdrake.pm_.c:1387 msgid "Printer manufacturer, model, driver" msgstr "" -#: ../../printerdrake.pm_.c:1415 ../../printerdrake.pm_.c:1474 +#: ../../printerdrake.pm_.c:1332 ../../printerdrake.pm_.c:1388 msgid "Printer manufacturer, model" msgstr "" -#: ../../printerdrake.pm_.c:1421 ../../printerdrake.pm_.c:1521 +#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1435 msgid "Print test pages" msgstr "" -#: ../../printerdrake.pm_.c:1422 ../../printerdrake.pm_.c:1523 +#: ../../printerdrake.pm_.c:1339 ../../printerdrake.pm_.c:1437 msgid "Remove printer" msgstr "" -#: ../../printerdrake.pm_.c:1525 +#: ../../printerdrake.pm_.c:1439 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "" @@ -6465,7 +6091,7 @@ msgstr "" msgid "Network configuration (%d adapters)" msgstr "" -#: ../../standalone/draknet_.c:83 ../../standalone/draknet_.c:561 +#: ../../standalone/draknet_.c:83 ../../standalone/draknet_.c:562 msgid "Profile: " msgstr "" @@ -6482,7 +6108,9 @@ msgid "New profile..." msgstr "" #: ../../standalone/draknet_.c:131 -msgid "Name of the profile to create:" +msgid "" +"Name of the profile to create (the new profile is created as a copy of the " +"current one) :" msgstr "" #: ../../standalone/draknet_.c:157 @@ -6497,11 +6125,11 @@ msgstr "" msgid "Type:" msgstr "" -#: ../../standalone/draknet_.c:180 ../../standalone/draknet_.c:388 +#: ../../standalone/draknet_.c:180 ../../standalone/draknet_.c:389 msgid "Gateway:" msgstr "" -#: ../../standalone/draknet_.c:180 ../../standalone/draknet_.c:388 +#: ../../standalone/draknet_.c:180 ../../standalone/draknet_.c:389 msgid "Interface:" msgstr "" @@ -6509,19 +6137,19 @@ msgstr "" msgid "Status:" msgstr "" -#: ../../standalone/draknet_.c:187 ../../standalone/draknet_.c:391 +#: ../../standalone/draknet_.c:187 ../../standalone/draknet_.c:392 msgid "Connected" msgstr "" -#: ../../standalone/draknet_.c:187 ../../standalone/draknet_.c:391 +#: ../../standalone/draknet_.c:187 ../../standalone/draknet_.c:392 msgid "Not connected" msgstr "" -#: ../../standalone/draknet_.c:190 ../../standalone/draknet_.c:392 +#: ../../standalone/draknet_.c:190 ../../standalone/draknet_.c:393 msgid "Connect..." msgstr "" -#: ../../standalone/draknet_.c:190 ../../standalone/draknet_.c:392 +#: ../../standalone/draknet_.c:190 ../../standalone/draknet_.c:393 msgid "Disconnect..." msgstr "" @@ -6549,7 +6177,7 @@ msgstr "" msgid "Configure Internet Access..." msgstr "" -#: ../../standalone/draknet_.c:243 ../../standalone/draknet_.c:434 +#: ../../standalone/draknet_.c:243 ../../standalone/draknet_.c:435 msgid "LAN configuration" msgstr "" @@ -6585,72 +6213,72 @@ msgstr "" msgid "Please Wait... Applying the configuration" msgstr "" -#: ../../standalone/draknet_.c:416 +#: ../../standalone/draknet_.c:417 msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" -#: ../../standalone/draknet_.c:438 +#: ../../standalone/draknet_.c:439 msgid "LAN Configuration" msgstr "" -#: ../../standalone/draknet_.c:445 +#: ../../standalone/draknet_.c:446 #, c-format msgid "Adapter %s: %s" msgstr "" -#: ../../standalone/draknet_.c:451 +#: ../../standalone/draknet_.c:452 msgid "Boot Protocol" msgstr "" -#: ../../standalone/draknet_.c:452 +#: ../../standalone/draknet_.c:453 msgid "Started on boot" msgstr "" -#: ../../standalone/draknet_.c:453 +#: ../../standalone/draknet_.c:454 msgid "DHCP client" msgstr "" -#: ../../standalone/draknet_.c:477 ../../standalone/draknet_.c:479 +#: ../../standalone/draknet_.c:478 ../../standalone/draknet_.c:480 msgid "activate now" msgstr "" -#: ../../standalone/draknet_.c:477 ../../standalone/draknet_.c:479 +#: ../../standalone/draknet_.c:478 ../../standalone/draknet_.c:480 msgid "desactivate now" msgstr "" -#: ../../standalone/draknet_.c:526 +#: ../../standalone/draknet_.c:527 msgid "" "You don't have any internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" -#: ../../standalone/draknet_.c:550 +#: ../../standalone/draknet_.c:551 msgid "Internet connection configuration" msgstr "" -#: ../../standalone/draknet_.c:554 +#: ../../standalone/draknet_.c:555 msgid "Internet Connection Configuration" msgstr "" -#: ../../standalone/draknet_.c:563 +#: ../../standalone/draknet_.c:564 msgid "Connection type: " msgstr "" -#: ../../standalone/draknet_.c:569 +#: ../../standalone/draknet_.c:570 msgid "Parameters" msgstr "" -#: ../../standalone/draknet_.c:596 +#: ../../standalone/draknet_.c:597 msgid "Ethernet Card" msgstr "" -#: ../../standalone/draknet_.c:597 +#: ../../standalone/draknet_.c:598 msgid "DHCP Client" msgstr "" -#: ../../standalone/draknet_.c:599 +#: ../../standalone/draknet_.c:600 msgid "Connection timeout (in sec) [ beta, not yet implemented ]" msgstr "" @@ -6705,7 +6333,7 @@ msgid "" "Security features are at their maximum." msgstr "" -#: ../../standalone/draksec_.c:55 +#: ../../standalone/draksec_.c:66 msgid "Setting security level" msgstr "" -- cgit v1.2.1