From be2c6d32eaa8142993315fac769cdabc0731a569 Mon Sep 17 00:00:00 2001 From: Till Kamppeter Date: Mon, 13 Jan 2003 02:01:36 +0000 Subject: New CUPS printer sharing configuration dialog. Reverted broken printer::main::set_usermode() to version of Mandrake 9.0. --- perl-install/printer/main.pm | 440 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 433 insertions(+), 7 deletions(-) (limited to 'perl-install/printer/main.pm') diff --git a/perl-install/printer/main.pm b/perl-install/printer/main.pm index 5981fa744..7c9930950 100644 --- a/perl-install/printer/main.pm +++ b/perl-install/printer/main.pm @@ -667,8 +667,35 @@ sub get_cups_autoconf { sub set_usermode { my $usermode = $_[0]; $::expert = $usermode; - my $str = $usermode ? "expert" : "recommended"; - substInFile { s/^(USER_MODE=).*/$1$str/; $_ .= "USER_MODE=$str" if eof } "$::prefix/etc/sysconfig/printing"; + + # Read config file + local *F; + my $file = "$::prefix/etc/sysconfig/printing"; + my @file_content; + if (!(-f $file)) { + @file_content = (); + } else { + open F, "< $file" or die "Cannot open $file!"; + @file_content = ; + close F; + } + + # Remove all valid "USER_MODE" lines + (/^\s*USER_MODE/ and $_ = "") foreach @file_content; + + # Insert the new "USER_MODE" line + if ($usermode) { + push @file_content, "USER_MODE=expert\n"; + } else { + push @file_content, "USER_MODE=recommended\n"; + } + + # Write back modified file + open F, "> $file" or die "Cannot open $file!"; + print F @file_content; + close F; + + return 1; } sub get_usermode { @@ -706,6 +733,24 @@ sub read_directives { return @result; } +sub read_unique_directive { + + # Read a directive from the from the cupsd.conf file or from a + # ripped-out location block, if the directive appears more than once, + # use the last occurence and remove all the others, if it does not + # occur, return the default value + + my ($lines_ptr, $directive, $default) = @_; + + if ((my @d = read_directives($lines_ptr, $directive)) > 0) { + my $value = @d[$#d]; + set_directive($lines_ptr, "$directive $value"); + return $value; + } else { + return $default; + } +} + sub insert_directive { # Insert a directive into the cupsd.conf file or into a ripped-out @@ -739,9 +784,6 @@ sub replace_directive { my ($lines_ptr, $olddirective, $newdirective) = @_; - # Do not do the replacement when the new directive already exists - ($_ =~ /^\s*$newdirective$/ and return 0) foreach @{$lines_ptr}; - $newdirective = "$newdirective\n"; my $success = 0; ($_ =~ /^\s*$olddirective/ and $_ = $newdirective and @@ -757,7 +799,7 @@ sub set_directive { my ($cupsd_conf_ptr, $directive) = @_; my $olddirective = $directive; - $olddirective =~ s/^\s*(\S+)\s+.*$/$1/; + $olddirective =~ s/^\s*(\S+)\s+.*$/$1/s; return (replace_directive($cupsd_conf_ptr, $olddirective, $directive) or @@ -843,7 +885,7 @@ sub rip_location { splice(@{$cupsd_conf_ptr},$location_start, $location_end - $location_start + 1); } else { - # If there is no root location block, create one + # If there is no location block, create one $location_start = $#{$cupsd_conf_ptr} + 1; @location = (); push @location, "\n"; @@ -930,6 +972,390 @@ sub replace_allowed_host { "Allow From $newhost")); } +sub broadcastaddress { + + # Determines the broadcast address (for "BrowseAddress" line) for + # a given network IP + + my ($address) = @_; + + if ($address =~ /^\d+\.\*$/) { + $address =~ s/\*$/255.255.255/; + } elsif ($address =~ /^\d+\.\d+\.\*$/) { + $address =~ s/\*$/255.255/; + } elsif ($address =~ /^\d+\.\d+\.\d+\.\*$/) { + $address =~ s/\*$/255/; + } elsif ($address =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)\/(\d+)$/) { + my $numadr = ($1 << 24) + ($2 << 16) + ($3 << 8) + $4; + my $mask = ((1 << $5) - 1) << (32 - $5); + my $broadcast = $numadr | (~$mask); + $address = + (($broadcast & (255 << 24)) >> 24) . '.' . + (($broadcast & (255 << 16)) >> 16) . '.' . + (($broadcast & (255 << 8)) >> 8) . '.' . + ($broadcast & 255); + } elsif ($address =~ + /^(\d+)\.(\d+)\.(\d+)\.(\d+)\/(\d+)\.(\d+)\.(\d+)\.(\d+)$/) { + my $numadr = ($1 << 24) + ($2 << 16) + ($3 << 8) + $4; + my $mask = ($5 << 24) + ($6 << 16) + ($7 << 8) + $8; + my $broadcast = $numadr | (~$mask); + $address = + (($broadcast & (255 << 24)) >> 24) . '.' . + (($broadcast & (255 << 16)) >> 16) . '.' . + (($broadcast & (255 << 8)) >> 8) . '.' . + ($broadcast & 255); + } + + return $address; +} + +sub networkaddress { + + # Guesses a network address for a given broadcast address + + my ($address) = @_; + + if ($address =~ /\.255$/) { + while ($address =~ s/\.255$//) {}; + $address .= ".*"; + } + + return $address; +} + +sub localprintersshared { + + # Do we broadcast our local printers + + my ($printer) = @_; + + return (($printer->{cupsconfig}{keys}{Browsing} !~ /off/i) && + ($printer->{cupsconfig}{keys}{BrowseInterval} != 0) && + ($#{$printer->{cupsconfig}{keys}{BrowseAddress}} >= 0)); +} + +sub remotebroadcastsaccepted { + + # Do we accept broadcasts from remote CUPS servers? + + my ($printer) = @_; + + # Is browsing not turned on at all? + if ($printer->{cupsconfig}{keys}{Browsing} =~ /off/i) { + return 0; + } + + # No "BrowseDeny" lines at all + if ($#{$printer->{cupsconfig}{keys}{BrowseDeny}} < 0) { + return 1; + } + + my $havedenyall = + (join('', @{$printer->{cupsconfig}{keys}{BrowseDeny}}) =~ + /All/im); + my $havedenylocal = + (join('', @{$printer->{cupsconfig}{keys}{BrowseDeny}}) =~ + /\@LOCAL/im); + my $orderallowdeny = + ($printer->{cupsconfig}{keys}{BrowseOrder} =~ + /allow\s*,\s*deny/i); + my $haveallowremote = 0; + for my $allowline (@{$printer->{cupsconfig}{keys}{BrowseAllow}}) { + next if + ($allowline =~ /^\s*(localhost|0*127\.0+\.0+\.0*1|none)\s*$/i); + $haveallowremote = 1; + } + + # A line denying all (or at least the all LANs) together with the order + # "allow,deny" or without "BrowseAllow" lines (which allow the + # broadcasts of at least one remote resource). + if (($havedenyall || $havedenylocal) && + ($orderallowdeny || !$haveallowremote)) { + return 0; + } + + return 1; +} + +sub clientnetworks { + + # Determine the client networks to which the printers will be + # shared If the configuration is supported by our simplified + # interface ("Deny From All", "Order Deny,Allow", "Allow From ..." + # lines in " ... ", a "BrowseAddress ..." + # line for each "Allow From ..." line), return the list of allowed + # client networks ("Allow"/"BrowseAddress" lines), if not, return + # the list of all items which are at least one of the + # "BrowseAddresse"s or one of the "Allow From" addresses together + # with a flag that the setup is not supported. + + my ($printer) = @_; + + # Check for a "Deny From All" line + my $havedenyfromall = + (join('', @{$printer->{cupsconfig}{root}{DenyFrom}}) =~ + /All/im); + + # Check for "Order Deny,Allow" + my $orderdenyallow = + ($printer->{cupsconfig}{root}{Order} =~ + /deny\s*,\s*allow/i); + + my @sharehosts; + my $haveallowfromlocalhost = 0; + my $haveallowedhostwithoutbrowseaddress = 0; + + # Go through all "Allow From" lines + for my $line (@{$printer->{cupsconfig}{root}{AllowFrom}}) { + if ($line =~ /^\s*(localhost|0*127\.0+\.0+\.0*1)\s*$/i) { + # Line pointing to localhost + $haveallowfromlocalhost = 1; + } elsif ($line =~ /^\s*(none)\s*$/i) { + # Skip "Allow From None" lines + } elsif (!member($line, @sharehosts)) { + # Line pointing to remote server + push(@sharehosts, $line); + if (!member(broadcastaddress($line), + @{$printer->{cupsconfig}{keys}{BrowseAddress}})) { + $haveallowedhostwithoutbrowseaddress = 1; + } + } + } + my $havebrowseaddresswithoutallowedhost = 0; + # Go through all "BrowseAdress" lines + for my $line (@{$printer->{cupsconfig}{keys}{BrowseAddress}}) { + if ($line =~ /^\s*(localhost|0*127\.0+\.0+\.0*1)\s*$/i) { + # Skip lines pointing to localhost + } elsif ($line =~ /^\s*(none)\s*$/i) { + # Skip "Allow From None" lines + } elsif (!member($line, map {broadcastaddress($_)} @sharehosts)) { + # Line pointing to remote server + push(@sharehosts, networkaddress($line)); + $havebrowseaddresswithoutallowedhost = 1; + } + } + + my $configunsupported = (!$havedenyfromall || !$orderdenyallow || + !$haveallowfromlocalhost || + $haveallowedhostwithoutbrowseaddress || + $havebrowseaddresswithoutallowedhost); + + return ($configunsupported, @sharehosts); +} + +sub makesharehostlist { + + # Human-readable strings for hosts onto which the local printers + # are shared + + my ($printer) = @_; + + my @sharehostlist; + my %sharehosthash; + for my $host (@{$printer->{cupsconfig}{clientnetworks}}) { + if ($host =~ /\@LOCAL/i) { + $sharehosthash{$host} = N("Local network(s)"); + } elsif ($host =~ /\@IF\((.*)\)/i) { + $sharehosthash{$host} = N("Interface \"%s\"", $1); + } elsif ($host =~ /(\/|^\*|\*$|^\.)/i) { + $sharehosthash{$host} = N("Network %s", $host); + } else { + $sharehosthash{$host} = N("Host %s", $host); + } + push(@sharehostlist, $sharehosthash{$host}); + } + my %sharehosthash_inv = reverse %sharehosthash; + + return { list => \@sharehostlist, + hash => \%sharehosthash, + invhash => \%sharehosthash_inv }; +} + +sub is_network_ip { + + # Determine whwther the given string is a valid network IP + + my ($address) = @_; + + ($address =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)$/) || + ($address =~ /^(\d+\.){1,3}\*$/) || + ($address =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)\/(\d+)$/) || + ($address =~ + /^(\d+)\.(\d+)\.(\d+)\.(\d+)\/(\d+)\.(\d+)\.(\d+)\.(\d+)$/); + +} + +sub read_cups_config { + + # Read the information relevant to the printer sharing dialog from + # the CUPS configuration + + my ($printer) = @_; + + # From /etc/cups/cupsd.conf + + # Keyword "Browsing" + $printer->{cupsconfig}{keys}{Browsing} = + read_unique_directive($printer->{cupsconfig}{cupsd_conf}, + 'Browsing', 'On'); + + # Keyword "BrowseInterval" + $printer->{cupsconfig}{keys}{BrowseInterval} = + read_unique_directive($printer->{cupsconfig}{cupsd_conf}, + 'BrowseInterval', '30'); + + # Keyword "BrowseAddress" + @{$printer->{cupsconfig}{keys}{BrowseAddress}} = + read_directives($printer->{cupsconfig}{cupsd_conf}, + 'BrowseAddress'); + + # Keyword "BrowseAllow" + @{$printer->{cupsconfig}{keys}{BrowseAllow}} = + read_directives($printer->{cupsconfig}{cupsd_conf}, + 'BrowseAllow'); + + # Keyword "BrowseDeny" + @{$printer->{cupsconfig}{keys}{BrowseDeny}} = + read_directives($printer->{cupsconfig}{cupsd_conf}, + 'BrowseDeny'); + + # Keyword "BrowseOrder" + $printer->{cupsconfig}{keys}{BrowseOrder} = + read_unique_directive($printer->{cupsconfig}{cupsd_conf}, + 'BrowseOrder', 'deny,allow'); + + # Root location + @{$printer->{cupsconfig}{rootlocation}} = + read_location($printer->{cupsconfig}{cupsd_conf}, '/'); + + # Keyword "Allow from" + @{$printer->{cupsconfig}{root}{AllowFrom}} = + read_directives($printer->{cupsconfig}{rootlocation}, + 'Allow From'); + + # Keyword "Deny from" + @{$printer->{cupsconfig}{root}{DenyFrom}} = + read_directives($printer->{cupsconfig}{rootlocation}, + 'Deny From'); + + # Keyword "Order" + $printer->{cupsconfig}{root}{Order} = + read_unique_directive($printer->{cupsconfig}{rootlocation}, + 'Order', 'Deny,Allow'); + + # Widget settings + + # Local printers available to other machines? + $printer->{cupsconfig}{localprintersshared} = + localprintersshared($printer); + + # This machine is accepting printers shared by remote machines? + $printer->{cupsconfig}{remotebroadcastsaccepted} = + remotebroadcastsaccepted($printer); + + # To which machines are the local printers available? + ($printer->{cupsconfig}{customsharingsetup}, + @{$printer->{cupsconfig}{clientnetworks}}) = + clientnetworks($printer); + +} + +sub write_cups_config { + + # Write the information edited via the printer sharing dialog into + # the CUPS configuration + + my ($printer) = @_; + + # Local printers available to other machines? + if ($printer->{cupsconfig}{localprintersshared}) { + set_directive($printer->{cupsconfig}{cupsd_conf}, + 'Browsing On'); + if ($printer->{cupsconfig}{keys}{BrowseInterval} == 0) { + set_directive($printer->{cupsconfig}{cupsd_conf}, + 'BrowseInterval 30'); + } + } else { + set_directive($printer->{cupsconfig}{cupsd_conf}, + 'BrowseInterval 0'); + } + + # This machine is accepting printers shared by remote machines? + if ($printer->{cupsconfig}{remotebroadcastsaccepted}) { + set_directive($printer->{cupsconfig}{cupsd_conf}, + 'Browsing On'); + if (($printer->{cupsconfig}{localprintersshared}) && + ($#{$printer->{cupsconfig}{clientnetworks}} > 0) && + (!$printer->{cupsconfig}{customsharingsetup})) { + # If we broadcast our printers, let's accept the broadcasts + # from the machines to which we broadcast + set_directive($printer->{cupsconfig}{cupsd_conf}, + 'BrowseDeny All'); + set_directive($printer->{cupsconfig}{cupsd_conf}, + 'BrowseOrder Deny,Allow'); + set_directive($printer->{cupsconfig}{cupsd_conf}, + 'BrowseAllow ' . + join ("\nBrowseAllow ", + @{$printer->{cupsconfig}{clientnetworks}})); + } elsif (!remotebroadcastsaccepted($printer)) { + # Use default settings if the "BrowseDeny"/"BrowseAllow" + # configuration does not accept broadcasts + set_directive($printer->{cupsconfig}{cupsd_conf}, + 'BrowseDeny All'); + set_directive($printer->{cupsconfig}{cupsd_conf}, + 'BrowseOrder Deny,Allow'); + set_directive($printer->{cupsconfig}{cupsd_conf}, + 'BrowseOrder @LOCAL'); + } + } else { + # Deny all broadcasts, but leave all "BrowseAllow" lines + # untouched + set_directive($printer->{cupsconfig}{cupsd_conf}, + 'BrowseDeny All'); + set_directive($printer->{cupsconfig}{cupsd_conf}, + 'BrowseOrder Allow,Deny'); + } + + # To which machines are the local printers available? + if (!$printer->{cupsconfig}{customsharingsetup}) { + # root location block + @{$printer->{cupsconfig}{rootlocation}} = + "\n" . + "Order Deny,Allow\n" . + "Deny From All\n" . + "Allow From 127.0.0.1\n" . + "Allow From " . + join ("\nAllow From ", + @{$printer->{cupsconfig}{clientnetworks}}) . + "\n" . + "\n"; + my ($location_start, @location) = + rip_location($printer->{cupsconfig}{cupsd_conf}, "/"); + insert_location($printer->{cupsconfig}{cupsd_conf}, $location_start, + @{$printer->{cupsconfig}{rootlocation}}); + # "BrowseAddress" lines + set_directive($printer->{cupsconfig}{cupsd_conf}, + 'BrowseAddress ' . + join ("\nBrowseAddress ", + map {broadcastaddress($_)} + @{$printer->{cupsconfig}{clientnetworks}})); + } + +} + +sub clean_cups_config { + + # Clean $printer data structure from all settings not related to + # the CUPS printer sharing dialog + + my ($printer) = @_; + + delete $printer->{cupsconfig}{keys}; + delete $printer->{cupsconfig}{root}; + delete $printer->{cupsconfig}{cupsd_conf}; + delete $printer->{cupsconfig}{rootlocation}; +} + #---------------------------------------------------------------------- sub read_printers_conf { my ($printer) = @_; -- cgit v1.2.1